Btrfs: fix order by which delayed references are run

When we have an extent that got N references removed and N new references
added in the same transaction, we must run the insertion of the references
first because otherwise the last removed reference will remove the extent
item from the extent tree, resulting in a failure for the insertions.

This is a regression introduced in the 4.2-rc1 release and this fix just
brings back the behaviour of selecting reference additions before any
reference removals.

The following test case for fstests reproduces the issue:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      _cleanup_flakey
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter
  . ./common/dmflakey

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_dm_flakey
  _require_cloner
  _require_metadata_journaling $SCRATCH_DEV

  rm -f $seqres.full

  _scratch_mkfs >>$seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create prealloc extent covering range [160K, 620K[
  $XFS_IO_PROG -f -c "falloc 160K 460K" $SCRATCH_MNT/foo

  # Now write to the last 80K of the prealloc extent plus 40K to the unallocated
  # space that immediately follows it. This creates a new extent of 40K that spans
  # the range [620K, 660K[.
  $XFS_IO_PROG -c "pwrite -S 0xaa 540K 120K" $SCRATCH_MNT/foo | _filter_xfs_io

  # At this point, there are now 2 back references to the prealloc extent in our
  # extent tree. Both are for our file offset 160K and one relates to a file
  # extent item with a data offset of 0 and a length of 380K, while the other
  # relates to a file extent item with a data offset of 380K and a length of 80K.

  # Make sure everything done so far is durably persisted (all back references are
  # in the extent tree, etc).
  sync

  # Now clone all extents of our file that cover the offset 160K up to its eof
  # (660K at this point) into itself at offset 2M. This leaves a hole in the file
  # covering the range [660K, 2M[. The prealloc extent will now be referenced by
  # the file twice, once for offset 160K and once for offset 2M. The 40K extent
  # that follows the prealloc extent will also be referenced twice by our file,
  # once for offset 620K and once for offset 2M + 460K.
  $CLONER_PROG -s $((160 * 1024)) -d $((2 * 1024 * 1024)) -l 0 $SCRATCH_MNT/foo \
	$SCRATCH_MNT/foo

  # Now create one new extent in our file with a size of 100Kb. It will span the
  # range [3M, 3M + 100K[. It also will cause creation of a hole spanning the
  # range [2M + 460K, 3M[. Our new file size is 3M + 100K.
  $XFS_IO_PROG -c "pwrite -S 0xbb 3M 100K" $SCRATCH_MNT/foo | _filter_xfs_io

  # At this point, there are now (in memory) 4 back references to the prealloc
  # extent.
  #
  # Two of them are for file offset 160K, related to file extent items
  # matching the file offsets 160K and 540K respectively, with data offsets of
  # 0 and 380K respectively, and with lengths of 380K and 80K respectively.
  #
  # The other two references are for file offset 2M, related to file extent items
  # matching the file offsets 2M and 2M + 380K respectively, with data offsets of
  # 0 and 380K respectively, and with lengths of 389K and 80K respectively.
  #
  # The 40K extent has 2 back references, one for file offset 620K and the other
  # for file offset 2M + 460K.
  #
  # The 100K extent has a single back reference and it relates to file offset 3M.

  # Now clone our 100K extent into offset 600K. That offset covers the last 20K
  # of the prealloc extent, the whole 40K extent and 40K of the hole starting at
  # offset 660K.
  $CLONER_PROG -s $((3 * 1024 * 1024)) -d $((600 * 1024)) -l $((100 * 1024)) \
      $SCRATCH_MNT/foo $SCRATCH_MNT/foo

  # At this point there's only one reference to the 40K extent, at file offset
  # 2M + 460K, we have 4 references for the prealloc extent (2 for file offset
  # 160K and 2 for file offset 2M) and 2 references for the 100K extent (1 for
  # file offset 3M and a new one for file offset 600K).

  # Now fsync our file to make all its new data and metadata updates are durably
  # persisted and present if a power failure/crash happens after a successful
  # fsync and before the next transaction commit.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

  echo "File digest before power failure:"
  md5sum $SCRATCH_MNT/foo | _filter_scratch

  # Silently drop all writes and ummount to simulate a crash/power failure.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  # Allow writes again, mount to trigger log replay and validate file contents.
  # During log replay, the btrfs delayed references implementation used to run the
  # deletion of back references before the addition of new back references, which
  # made the addition fail as it didn't find the key in the extent tree that it
  # was looking for. The failure triggered by this test was related to the 40K
  # extent, which got 1 reference dropped and 1 reference added during the fsync
  # log replay - when running the delayed references at transaction commit time,
  # btrfs was applying the deletion before the insertion, resulting in a failure
  # of the insertion that ended up turning the fs into read-only mode.
  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  echo "File digest after log replay:"
  md5sum $SCRATCH_MNT/foo | _filter_scratch

  _unmount_flakey

  status=0
  exit

This issue turned the filesystem into read-only mode (current transaction
aborted) and produced the following traces:

  [ 8247.578385] ------------[ cut here ]------------
  [ 8247.579947] WARNING: CPU: 0 PID: 11341 at fs/btrfs/extent-tree.c:1547 lookup_inline_extent_backref+0x17d/0x45d [btrfs]()
  (...)
  [ 8247.601697] Call Trace:
  [ 8247.602222]  [<ffffffff8145f077>] dump_stack+0x4f/0x7b
  [ 8247.604320]  [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb
  [ 8247.605488]  [<ffffffffa0506c8d>] ? lookup_inline_extent_backref+0x17d/0x45d [btrfs]
  [ 8247.608226]  [<ffffffffa0506c8d>] lookup_inline_extent_backref+0x17d/0x45d [btrfs]
  [ 8247.617061]  [<ffffffffa0507957>] insert_inline_extent_backref+0x41/0xb2 [btrfs]
  [ 8247.621856]  [<ffffffffa0507c4f>] __btrfs_inc_extent_ref+0x8c/0x20a [btrfs]
  [ 8247.624366]  [<ffffffffa050ee60>] __btrfs_run_delayed_refs+0xb0c/0xd49 [btrfs]
  [ 8247.626176]  [<ffffffffa0510dcd>] btrfs_run_delayed_refs+0x6d/0x1d4 [btrfs]
  [ 8247.627435]  [<ffffffff81155c9b>] ? __cache_free+0x4a7/0x4b6
  [ 8247.628531]  [<ffffffffa0520482>] btrfs_commit_transaction+0x4c/0xa20 [btrfs]
  (...)
  [ 8247.648430] ---[ end trace 2461e55f92c2ac2d ]---

  [ 8247.727263] WARNING: CPU: 3 PID: 11341 at fs/btrfs/extent-tree.c:2771 btrfs_run_delayed_refs+0xa4/0x1d4 [btrfs]()
  [ 8247.728954] BTRFS: Transaction aborted (error -5)
  (...)
  [ 8247.760866] Call Trace:
  [ 8247.761534]  [<ffffffff8145f077>] dump_stack+0x4f/0x7b
  [ 8247.764271]  [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb
  [ 8247.767582]  [<ffffffffa0510e04>] ? btrfs_run_delayed_refs+0xa4/0x1d4 [btrfs]
  [ 8247.769373]  [<ffffffff8104b410>] warn_slowpath_fmt+0x46/0x48
  [ 8247.770836]  [<ffffffffa0510e04>] btrfs_run_delayed_refs+0xa4/0x1d4 [btrfs]
  [ 8247.772532]  [<ffffffff81155c9b>] ? __cache_free+0x4a7/0x4b6
  [ 8247.773664]  [<ffffffffa0520482>] btrfs_commit_transaction+0x4c/0xa20 [btrfs]
  [ 8247.775047]  [<ffffffff81087310>] ? trace_hardirqs_on+0xd/0xf
  [ 8247.776176]  [<ffffffff81155dd5>] ? kmem_cache_free+0x12b/0x189
  [ 8247.777427]  [<ffffffffa055a920>] btrfs_recover_log_trees+0x2da/0x33d [btrfs]
  [ 8247.778575]  [<ffffffffa055898e>] ? replay_one_extent+0x4fc/0x4fc [btrfs]
  [ 8247.779838]  [<ffffffffa051e265>] open_ctree+0x1cc0/0x201a [btrfs]
  [ 8247.781020]  [<ffffffff81120f48>] ? register_shrinker+0x56/0x81
  [ 8247.782285]  [<ffffffffa04fb12c>] btrfs_mount+0x5f0/0x734 [btrfs]
  (...)
  [ 8247.793394] ---[ end trace 2461e55f92c2ac2e ]---
  [ 8247.794276] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2771: errno=-5 IO failure
  [ 8247.797335] BTRFS: error (device dm-0) in btrfs_replay_log:2375: errno=-5 IO failure (Failed to recover log tree)

Fixes: c6fc2454 ("btrfs: delayed-ref: Use list to replace the ref_root in ref_head.")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Acked-by: Qu Wenruo <quwenruo@cn.fujitsu.com>