Solved: How To Use tar Command Through Network Over SSH Session

How do I use tar command over secure ssh session running on Linux or Unix-like system?

The GNU version of the tar archiving utility (and other old version of tar) can be use through network over ssh session. Do not use telnet command, it is insecure. You can use Unix/Linux pipes to create archives.

Let us see some examples of how to use the tar command over ssh securely to create archives on Linux or Unix-like system. Tar over ssh on Linux or Unix Syntax

The syntax is as follows to ssh into box and run the tar command: ssh user@box tar czf - /dir1/ > /destination/file.tar.g

OR ssh user@box 'cd /dir1/ && tar -cf - file | gzip -9' >file.tar.gz

The following command backups /wwwdata directory to dumpserver.nixcraft.in (IP 192.168.1.201) host over ssh session.

tar zcvf - /wwwdata | ssh root@dumpserver.nixcraft.in "cat > /backup/wwwdata.tar.gz"

OR

tar zcvf - /wwwdata | ssh root@192.168.1.201 "cat > /backup/wwwdata.tar.gz"

Sample outputs:

tar: Removing leading `/' from member names /wwwdata/ /wwwdata/n/nixcraft.in/ /wwwdata/c/cyberciti.biz/ .... .. ... Password:

The default first SCSI tape drive under Linux is /dev/st0. You can read more about tape drives naming convention used under Linux here. You can also use dd command for clarity purpose:

tar cvzf - /wwwdata | ssh root@192.168.1.201 "dd of=/backup/wwwdata.tar.gz"

It is also possible to dump backup to remote tape device:

tar cvzf - /wwwdata | ssh root@192.168.1.201 "cat > /dev/nst0"

OR you can use mt to rewind tape and then dump it using cat command:

tar cvzf - /wwwdata | ssh root@192.168.1.201 (mt -f /dev/nst0 rewind; cat > /dev/nst0)

You can restore tar backup over ssh session:

cd /

ssh root@192.168.1.201 "cat /backup/wwwdata.tar.gz" | tar zxvf -

If you wish to use above command in cron job or scripts then consider SSH keys to get rid of the passwords. Some more examples:

$ tar cvjf - * | ssh vivek@nixcraft "(cd /dest/; tar xjf -)" $ tar cvzf - mydir/ | ssh vivek@backupbox "cat > /backups/myfile.tgz" $ tar cvzf - /var/www/html | ssh vivek@server1.cyberciti.biz "dd of=/backups/www.tar.gz" $ ssh vivek@box2 "cat /backups/www.tar.gz" | tar xvzf - $ tar cvjf - * | ssh root@home.nas02 "(cd /dest/; tar xjf - )"

Make sure you read the tar command/ssh command/bash command man page for more info: $ man tar $ man bash $ man ssh A note about SSHFS – a FUSE filesystem

You can use sshfs to mount a remote directory and run tar command: mkdir /data/ sshfs vivek@server1.cyberciti.biz:/ /data/ tar -zcvf /data/file.tar.gz /home/vivek/ Posted by: Vivek Gite

The author is the creator of nixCraft and a seasoned sysadmin, DevOps engineer, and a trainer for the Linux operating system/Unix shell scripting. Get the latest tutorials on SysAdmin, Linux/Unix and open source topics via RSS/XML feed or weekly email newsletter. GOT FEEDBACK? CLICK HERE TO JOIN THE DISCUSSION

Share this on (or read 40 comments/add one below): Twitter Facebook Google+ Your support makes a big difference:

I have a small favor to ask. More people are reading the nixCraft. Many of you block advertising which is your right, and advertising revenues are not sufficient to cover my operating costs. So you can see why I need to ask for your help. The nixCraft takes a lot of my time and hard work to produce. If everyone who reads nixCraft, who likes it, helps fund it, my future would be more secure. You can donate as little as $1 to support nixCraft:

Become a Supporter Make a contribution via Paypal/Bitcoin Related tutorials and howtos

UNIX: Loop Through Files In A Directory
How to: HP-UX UNIX Backup and Recover Data to Tape Device
How to Linux re apply or restore SELinux security labels context
Linux Tape Backup With mt And tar Command Howto
Tape drives naming convention under Linux

[Comments] 40 comment

Daniel K says:
October 26, 2006 at 7:02 am

Why use the ssh command twice, or is that a typo?
nixCraft says:
October 26, 2006 at 8:06 am

First one is with hostname and second one is with IP address.
mike says:
April 5, 2007 at 11:57 am

ssh ssh root@192.168.1.201 “cat /backup/wwwdata.tar.gz” | tar zxvf –

why use the ssh twice here? (I believe this was the original question, too.
nixCraft says:
April 5, 2007 at 12:58 pm

Daniel/Mike,

That was a typo. Thanks for heads up!
tafadzwa says:
October 2, 2007 at 2:06 pm

what is SQUID
Vincent says:
January 3, 2008 at 3:26 pm

The use of this and your examples seem rather untypical. Why pipe it through “ssh” if you’re just transfering a tar.gz to the other side. You could just create the tar.gz and scp it.

Also, the use of “cat” in your examples is completely unnecessary.

I came here hoping to find an example like this (i.e. transferring a directory recursively over ssh). So, for the next guy:

tar cvf – /data | ssh otherhost tar xvf –
    Jose says:
    June 23, 2011 at 12:15 pm

    the next guy thanks you very much
    Stephen Bunn says:
    August 4, 2011 at 1:11 am

    So how exactly would your tar up a 10GB partition with less than 1GB of space left? The original author’s solution works very nice, as does your solution. They are just used for two separate things.
    Vitalie Ciubotaru says:
    February 22, 2012 at 6:59 am

    tar cvf – /path/to/source/files | ssh otherhost “cd /path/to/destination/directory && tar xvf -“
Teknoenie says:
January 23, 2008 at 1:16 am

Hi Vincent,

You may want to do this to get around limitations in older implementations of SSH that do not allow for large file transfers (larger than 2GB). I had recently run into this problem and the only workable solution was to tar over ssh to get around it.
valor says:
April 15, 2008 at 10:15 am

Hi Vincent,

you could create a .tgz or whatever locally and then use scp. The problem with large amounts of data is that scp is awfully slow.

Cheers,

valor
james says:
August 24, 2008 at 3:09 pm

rsync -avzH -e’essh’ /wwwdata root@192.168.1.201:/backup/
Juan Cubillo says:
August 28, 2008 at 2:14 pm

The whole point of this command is to help you when you have a filesystem full and need to tar files but don’t have enough space to store the tars. You can pipe the tar through ssh so that later you may also delete the files and place the tar into the original filesystem.
poswer says:
November 5, 2008 at 8:41 am

i dont know how to use to tar on network i was used 192.168.200.178 machine i use this /mydata folder how to transer using tar over network destination system is 192.168.200.200. any one help me.
GDR! says:
January 5, 2009 at 11:35 pm

The opposite side – which is the more common case, where you want to pull data from server, as opposed to making the server initiate connection and pushing data:

ssh gdr@server.net "tar jcf - /srv/gdr/gdr.geekhood.net/gdrwpl" > gdrwpl_backup.tar.bz2

This might be useful if you are behind a firewall
thetrivialstuff says:
May 25, 2009 at 10:44 pm

Vincent:
The method of piping tar through SSH is faster than SCP not because SCP is slow (the transfer rate would theoretically be exactly the same), but because it saves a lot of time by parallelizing the tar.gz creation with the transfer. This is even more true if the source system only has one hard drive (or the only hard drive with enough free space to do the tar.gz is the same as the one you want data from).

If you have a few GB of loose files to copy into a .tar.gz on the remote side (say, for doing a backup), piping the output through ssh is faster because the source hard drive can just read continously the whole time and the destination can write at the same time. If you’re creating the .tar.gz on the same hard drive, you take a huge penalty for all the seeking it has to do; it as to read a bit, write it to the tar, read a bit more, write it to the tar, etc.

Even if you have a second hard drive (or a crapload of RAM), you’re still taking longer if you make the .tar.gz first because there’s creation + transfer time instead of just transfer time.
henno says:
August 2, 2009 at 8:32 am

Sorry for being dumb but… so what is exactly the most efficient command to get local data to the remote server?
sibia says:
August 17, 2009 at 11:53 am

Hi,

is there a way to write a shell script that can automatically write data to tape every end of day?
bram says:
September 17, 2009 at 4:52 pm

or using netcat

$ tar czvf – /var/spool | nc -l 12345
$ nc host 12345 | tar xzvf –

it’s not secure, but it doesn’t require much
zauberkeks says:
December 27, 2009 at 8:56 am

Hi,
thank you for your script snippets, one of these is just backing up some giga bytes across the network. But I notices a typo, a unnecessary “ssh” behind some of the pipe symbols. For example:
# tar cvzf - /wwwdata | ssh ssh root@192.168.1.201 "cat > /dev/nst0"
Henno Täht says:
January 1, 2010 at 6:47 pm

Here’s one that worked for me recently:

I had to copy all the files from server A to a directory in server B (in order to have full replica of A), using man-in-the-middle server (because that IP was the only one allowed to connect).

The trouble was that I only had sudo rights on the first server and there were absolutely all ports closed (both ways) except incoming 22 for my ip and incoming 80 and 443 for serving web. No way to ssh out of that box (fw blocked outgoing syn packets)

First I had to “initialize” sudo so that I wouldn’t be asked a password which would later be asked within the pipe so I can’t provide it then (you recognize it by the infinite delay in the beginning while files are not appearing to the other side).

ssh -Ct serverA "sudo hostname

Password:

-C uses compression,
-t forces assigning a terminal (RHEL 5.1 by default requires terminal)

I guess this can be achieved also by just sshing in and issuing the same command there. Hostname is just a random command to get sudo to ask for password (which it remembers for the next 15 minutes).

Now for the fun part:

ssh -Ct "stty -onlcr; sudo tar -cpf - -X /tmp/exclusion.list / 2> /dev/null" | ssh serverB "cd /tmp; tar cvpf -"

stty -onlcr fixes a problem that arises with using forced terminal: for every CR (0x13) an extra LF character will be injected (0x13) for proper displaying on terminal. Only we’re actually not using a terminal but passing the bitstream through the ssh tunnel to tar.

-p preserves files’ permissions
-X specifies an exclusion file (directories I don’t want to be copied like /dev, /proc and /sys)
/ is what I want to be tarred :)
2> /dev/null sends tar commentary to the darkest of places. Without it you’ll get tar’s own chatter within the data stream.

Hope this will be useful to someone (like myself, later on)
Henno Täht says:
January 1, 2010 at 6:51 pm

Typo fix:
1)
ssh -Ct serverA "sudo hostname"

2) …for every CR (0×13) an extra LF character will be injected (0×10) for proper displaying on terminal.
Henno Täht says:
January 1, 2010 at 6:55 pm

Typo fix2:
left the server out:
ssh -Ct serverA “stty -onlcr; sudo tar -cpf – -X /tmp/exclusion.list / 2> /dev/null” | ssh serverB “cd /tmp; tar cvpf -“
Anderson Brandão says:
February 10, 2010 at 12:39 am

Another way would be using tar in both ends, as the example below:

tar czvf - /somedir | ssh user@host "cat - | tar xzfv - -C /outputdir
Anderson Brandão says:
February 10, 2010 at 12:48 am

Another way would be using tar in both ends, as the example below:

tar czvf - /somedir | ssh user@host "cat - | tar xzfv - -C /outputdir"
Rich says:
March 17, 2010 at 2:53 pm

Anderson, the use of “cat” in your example is completely unnecessary.

tar czvf - /somedir | ssh user@host "tar xvzf - -C /outputdir
Henno Täht says:
March 18, 2010 at 7:00 am

I recently needed to copy entire directory structure from one machine to another, preserving symlinks, owners and dates. I’ve done this tens of times before with tar and ssh but this time it didn’t work.

Although I didn’t use the -h option, tar nevertheless followed symlinks and not recreated them on other side. Distro was Ubuntu 8.04. When I tried it with a small set of files, it worked, though, but I needed the entire tree. I never figured it out why it acted like that.

I was finally able to solve my problem by using rsync and after inital setup it worked very well. So for anyone stumbling over the same rock, here’s some examples getting it done with rsync:
http://www.commandlinefu.com/commands/matching/rsync/cnN5bmM=/sort-by-votes
Philippe Petrinko says:
April 1, 2010 at 10:01 pm

Vivek, There are at least 3 typos of duplicated ssh (ssh ssh).
carlos says:
May 26, 2010 at 3:02 pm

And why not tar jxf user@remote.com:some_archive.tar.bz2 ? It will do the ssh for you, no need to do the ssh yourself (I don’t remember if this was in Debian Lenny or Ubuntu Lucid… maybe older versions/other versions too).
DucQuoc.wordpress.com says:
November 8, 2010 at 12:57 pm

Is there some simple method to copy file through some kind of “ssh chain” ?
Assuming that I’m at “homepc” , can connect via SSH to “remote1” , and from “remote1” I can only connect SSH to “remote2” .

Which is the “one-liner” to copy a file from “remote2” to “homepc” ?
Let’s say it’s “remote2:/repository/somefile.war” (I googled around but not found easy method)
gUI says:
December 2, 2010 at 2:39 pm

Thanks a lot ! Really helpfull.

In my case I wanted to untar. The solution is :

ssh serveur “cat file.tar” | untar -xvf –
Pablo Lorenzzoni says:
February 18, 2011 at 8:13 pm

In my experience, “rsync over ssh” is much faster than “tar | ssh”. Both are faster than scp, though. The only advantage of “tar | ssh”, IMHO, is not needing to have rsync in the remote host…
Bennie Kahler-Venter says:
February 24, 2011 at 12:16 pm

GNU tar:

tar jcvf user@host:/somedir/file.tar.bz2 –rsh-command=/usr/bin/ssh /sourcedir/
bla says:
January 24, 2012 at 11:38 am

Easier:

tar -czf – bla | ssh oherhost “(cd /somewher/to/restore && tar -xzf -)”
Dan says:
June 4, 2013 at 1:03 am

I want to do exactly this to a Windows machine running ssh

I’m trying something like

tar zcvf - /somedir | ssh winuser@windowsbox.local " > /backup/wwwdata.tar.gz"

but there is no “cat” in windows, and the similar commands (echo, type, more) doesn’t seem to take input from stdin. Any ideas?
iabc says:
August 11, 2013 at 3:11 pm

i think it will be better to use -p while making backup
Helper says:
February 10, 2014 at 1:10 pm

@Dan: http://www.giyf had told you this link:
http://gnuwin32.sourceforge.net/packages/coreutils.htm

work perfect with BitVise SSH Server on Win over here.

HTH!
Helper says:
February 10, 2014 at 1:11 pm

@mod:
pls add this line to last post and delete this:

BTW: To add the install dir to the path makes things easier on target
eMPee584 says:
May 2, 2015 at 6:02 pm

If, for one reason or another, you call ssh with the `-t` param (as mentioned by Henno) or have set `RequestTTY yes` in your ssh_config, tar will give strange errors like
`tar: Skipping to next header
tar: Exiting with failure status due to previous errors`
or
`tar: A lone zero block at 21625
tar: Exiting with failure status due to previous errors`
These will go away by adding ssh parameter `-T Disable pseudo-tty allocation.`, or if you need `-t` by prepending `stty -onlcr; ` to the remote command as workaround (thx Henno!).
Vinay Gupta says:
September 12, 2016 at 9:59 am

Hi,
i am taking backup using this command
tar cvzf – /wwwdata | ssh root@192.168.1.201 “cat > /dev/nst0”
when i am extracting file it is got corrupted
issue is how can i extract file from tape /dev/nst0 ?

Have a question? Post it on our forum!

Post navigation Previous post: Previous post: Where are the passwords of the users located in Linux? Next post: Next post: Linux: Delete user password command Tagged as: Tags archiving, backups, cat command, command tar, dd command, gnu version, linux remote server backup, linux tape naming convention, passwords, pipes, scripts, scsi tape drive, secure linux backup, ssh session, tape drives, tar backup, tar command, tar over ssh, telnet command, unix linux Featured Articles:

30 Cool Open Source Software I Discovered in 2013
30 Handy Bash Shell Aliases For Linux / Unix / Mac OS X
Top 30 Nmap Command Examples For Sys/Network Admins
25 PHP Security Best Practices For Sys Admins
20 Linux System Monitoring Tools Every SysAdmin Should Know
20 Linux Server Hardening Security Tips
Linux: 20 Iptables Examples For New SysAdmins
Top 20 OpenSSH Server Best Security Practices
Top 20 Nginx WebServer Best Security Practices
20 Examples: Make Sure Unix / Linux Configuration Files Are Free From Syntax Errors
15 Greatest Open Source Terminal Applications Of 2012
My 10 UNIX Command Line Mistakes
Top 10 Open Source Web-Based Project Management Software
Top 5 Email Client For Linux, Mac OS X, and Windows Users
The Novice Guide To Buying A Linux Laptop

Related Posts:

How to compress files with tar command on Linux/Unix
How do I backup Thunderbird mail and profile under Linux?
How to backup the remote files in Linux / UNIX
Creating A tar File in Linux Via Command Line Options
UNIX: Loop Through Files In A Directory
Linux Set the Block Size for a SCSI Tape Device
How to Linux re apply or restore SELinux security labels context
How to: HP-UX UNIX Backup and Recover Data to Tape Device
Backup Home Directories in Linux
HowTo: Unpack .tgz File On a Linux
Verify tar command tape backup under Linux or UNIX
Linux / UNIX: Encrypt Backup Tape Using Tar & OpenSSL
How do I use cpio command under Linux?
Tape drives naming convention under Linux
Linux Tape Backup With mt And tar Command Howto

Sign up for my newsletter

Sign up for my newsletter Follow us TwitterFacebookGoogle+

RSS Recently updated

How to use lftp to accelerate ftp/https download speed on Linux/UNIX
How To Recover Linux Grub Boot Loader Password
OpenBSD install or add binary software package using pkg_add
How to use yum-cron to automatically update RHEL/CentOS Linux
Download Tux Paint Program For Young Children (Linux/macOS/Windows)
Linux Find Out Last System Reboot Time and Date Command
Linux wget: Your Ultimate Command Line Downloader
Linux Check IDE / SATA SSD Hard Disk Transfer Speed
Top 5 Linux DVD RIP Software
RAID 5 vs RAID 10: Recommended RAID For Safety and Performance

nixCraft @2000-2018 nixCraft. All rights reserved.

PRIVACYTERM OF SERVICECONTACT/EMAILDONATIONS

Hosted by Linode DNS & CDN by Cloudflare Designed and Developed by [Prospect One] Prospect One