- Jul 26, 2012
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlmLinus Torvalds authored
Pull dlm updatesfrom David Teigland: "This set includes a major redesign of recording the master node for resources. The old dir hash table, which just held the master node for each resource, has been removed. The rsb hash table has always duplicated the master node value from the dir, and is now the single record of it. Having two full hash tables of all resources has always been a waste, especially since one just duplicated a single value from the other. Local requests will now often require one instead of two lengthy hash table searches. The other substantial change is made possible by the dirtbl removal, and fixes a long standing race between resource removal and lookup by reworking how removal is done. At the same time it improves the efficiency of removal by avoiding repeated searches through a hash bucket. The other commits include minor fixes and changes." * tag 'dlm-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: fix missing dir remove dlm: fix conversion deadlock from recovery dlm: use wait_event_timeout dlm: fix race between remove and lookup dlm: use idr instead of list for recovered rsbs dlm: use rsbtbl as resource directory
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French. * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (40 commits) cifs: ensure that we always do cifsFileInfo_get under the spinlock CIFS: Make CAP_* checks protocol independent CIFS: Allow SMB2 statistics to be tracked CIFS: Move clear/print_stats code to ops struct CIFS: Add echo request support for SMB2 CIFS: Move echo code to osp struct CIFS: Add SMB2 support for async requests CIFS: Setup async request in ops struct CIFS: Add SMB2 support for build_path_to_root CIFS: Move building path to root to ops struct CIFS: Query SMB2 inode info CIFS: Move query inode info code to ops struct CIFS: Add SMB2 support for is_path_accessible CIFS: Move is_path_accessible to ops struct CIFS: Move informational tcon calls to ops struct CIFS: Move getting dfs referalls to ops struct CIFS: Process reconnects for SMB2 shares CIFS: Add tree connect/disconnect capability for SMB2 CIFS: Add session setup/logoff capability for SMB2 CIFS: Add capability to send SMB2 negotiate message ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO changes from Linus Walleij: - New driver for AMD-8111 southbridge GPIOs - New driver for Wolfson Micro Arizona devices - Propagate device tree parse errors - Probe deferral finalizations - all expected calls to GPIO will now hopefully request deferral where apropriate - Misc updates to TCA6424, WM8994, LPC32xx, PCF857x, Samsung MXC, OMAP and PCA953X drivers. Fix up gpio_idx conflicts in drivers/gpio/gpio-mxc.c * tag 'gpio-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available gpiolib: Defer failed gpio requests by default MAINTAINERS: add entry OMAP GPIO driver gpio/pca953x: increase variables size to support 24 bit of data GPIO: PCA953X: Increase size of invert variable to support 24 bit gpio/omap: move bank->dbck initialization to omap_gpio_mod_init() gpio/mxc: use the edge_sel feature if available gpio: propagate of_parse_phandle_with_args errors gpio: samsung: add flags specifier to device-tree binding gpiolib: Add support for Wolfson Microelectronics Arizona class devices gpio: gpio-lpc32xx: Add gpio_to_irq mapping gpio: pcf857x: share 8/16 bit access functions gpio: LPC32xx: Driver cleanup MAINTAINERS: Add Wolfson gpiolib drivers to the Wolfson entry gpiolib: wm8994: Convert to devm_kzalloc() gpiolib: wm8994: Use irq_domain mappings for gpios gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips gpio/tca6424: merge I2C transactions, remove cast gpio/of: fix a typo of comment message
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull tile PCI build fixes from Chris Metcalf: "This fixes a couple of issues with the pci_bus.subordinate removal from pci-next as it affected the tile architecture. One commit does the bombing for tilegx PCI (added during the merge window, so missed the pci-next bombing) and the other commit undoes a buggy part of the bombing for tilepro PCI." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tilepro pci: fix pci_bus.subordinate bad bombing from b918c62e tilegx pci: fix semantic merge conflict with 3527ed81
-
Josh Boyer authored
Recently, glibc made a change to suppress sign-conversion warnings in FD_SET (glibc commit ceb9e56b3d1). This uncovered an issue with the kernel's definition of __NFDBITS if applications #include <linux/types.h> after including <sys/select.h>. A build failure would be seen when passing the -Werror=sign-compare and -D_FORTIFY_SOURCE=2 flags to gcc. It was suggested that the kernel should either match the glibc definition of __NFDBITS or remove that entirely. The current in-kernel uses of __NFDBITS can be replaced with BITS_PER_LONG, and there are no uses of the related __FDELT and __FDMASK defines. Given that, we'll continue the cleanup that was started with commit 8b3d1cda ("posix_types: Remove fd_set macros") and drop the remaining unused macros. Additionally, linux/time.h has similar macros defined that expand to nothing so we'll remove those at the same time. Reported-by: Jeff Law <law@redhat.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> CC: <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@redhat.com> [ .. and fix up whitespace as per akpm ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/mm changes from Peter Anvin: "The big change here is the patchset by Alex Shi to use INVLPG to flush only the affected pages when we only need to flush a small page range. It also removes the special INVALIDATE_TLB_VECTOR interrupts (32 vectors!) and replace it with an ordinary IPI function call." Fix up trivial conflicts in arch/x86/include/asm/apic.h (added code next to changed line) * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tlb: Fix build warning and crash when building for !SMP x86/tlb: do flush_tlb_kernel_range by 'invlpg' x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR x86/tlb: enable tlb flush range support for x86 mm/mmu_gather: enable tlb flush range in generic mmu_gather x86/tlb: add tlb_flushall_shift knob into debugfs x86/tlb: add tlb_flushall_shift for specific CPU x86/tlb: fall back to flush all when meet a THP large page x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range x86/tlb_info: get last level TLB entry number of CPU x86: Add read_mostly declaration/definition to variables from smp.h x86: Define early read-mostly per-cpu macros
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pul x86/efi changes from Ingo Molnar: "This tree adds an EFI bootloader handover protocol, which, once supported on the bootloader side, will make bootup faster and might result in simpler bootloaders. The other change activates the EFI wall clock time accessors on x86-64 as well, instead of the legacy RTC readout." * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: Handover Protocol x86-64/efi: Use EFI to deal with platform wall clock
-
Linus Torvalds authored
Merge branches 'x86-cleanups-for-linus' and 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanup and cpufeature from Ingo Molnar: "Just a single cleanup and and a commit that adds new CPU feature names" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, boot: Remove ancient, unconditionally #ifdef'd out dead code * 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpufeature: Add the RDSEED and ADX features
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/boot changes from Ingo Molnar: "Kernel image size reduction and assorted fixes and other small improvements." * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, doc: Assign a bootloader ID for "Minimal Linux Bootloader" x86, boot: Exclude cmdline.c if you can't use it x86, boot: Exclude early_serial_console.c if can't use it. x86, boot: Removed unused debug flag and set code x86, boot: Switch output functions from command-line flags to conditional compilation x86, boot: Changed error putstr path to match new debug_putstr format x86, boot: Wrap debug printing in a new debug_putstr function x86, boot: Removed quiet flag and switched quiet output to debug flag
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler changes from Ingo Molnar: "The biggest change is a performance improvement on SMP systems: | 4 socket 40 core + SMT Westmere box, single 30 sec tbench | runs, higher is better: | | clients 1 2 4 8 16 32 64 128 |.......................................................................... | pre 30 41 118 645 3769 6214 12233 14312 | post 299 603 1211 2418 4697 6847 11606 14557 | | A nice increase in performance. which speedup is particularly noticeable on heavily interacting few-tasks workloads, so the changes should help desktop-style Xorg workloads and interactivity as well, on multi-core CPUs. There are also cpuset suspend behavior fixes/restructuring and various smaller tweaks." * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix race in task_group() sched: Improve balance_cpu() to consider other cpus in its group as target of (pinned) task sched: Reset loop counters if all tasks are pinned and we need to redo load balance sched: Reorder 'struct lb_env' members to reduce its size sched: Improve scalability via 'CPU buddies', which withstand random perturbations cpusets: Remove/update outdated comments cpusets, hotplug: Restructure functions that are invoked during hotplug cpusets, hotplug: Implement cpuset tree traversal in a helper function CPU hotplug, cpusets, suspend: Don't modify cpusets during suspend/resume sched/x86: Remove broken power estimation
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto updates from Herbert Xu: - Fixed algorithm construction hang when self-test fails. - Added SHA variants to talitos AEAD list. - New driver for Exynos random number generator. - Performance enhancements for arc4. - Added hwrng support to caam. - Added ahash support to caam. - Fixed bad kfree in aesni-intel. - Allow aesni-intel in FIPS mode. - Added atmel driver with support for AES/3DES/SHA. - Bug fixes for mv_cesa. - CRC hardware driver for BF60x family processors. * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (66 commits) crypto: twofish-avx - remove useless instruction crypto: testmgr - add aead cbc aes hmac sha1,256,512 test vectors crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms crypto: talitos - export the talitos_submit function crypto: talitos - move talitos structures to header file crypto: atmel - add new tests to tcrypt crypto: atmel - add Atmel SHA1/SHA256 driver crypto: atmel - add Atmel DES/TDES driver crypto: atmel - add Atmel AES driver ARM: AT91SAM9G45: add crypto peripherals crypto: testmgr - allow aesni-intel and ghash_clmulni-intel in fips mode hwrng: exynos - Add support for Exynos random number generator crypto: aesni-intel - fix wrong kfree pointer crypto: caam - ERA retrieval and printing for SEC device crypto: caam - Using alloc_coherent for caam job rings crypto: algapi - Fix hang on crypto allocation crypto: arc4 - now arc needs blockcipher support crypto: caam - one tasklet per job ring crypto: caam - consolidate memory barriers from job ring en/dequeue crypto: caam - only query h/w in job ring dequeue path ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input layer updates from Dmitry Torokhov: "First set of updates for the input subsystem. You will get a new touchscreen driver (Melfas mms114), a new keypad driver for LPC32xx SoC, large update to Atmel mXT touchscreen driver, a lot of drivers acquired device tree support and a slew of other fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: add MELFAS mms114 touchscreen driver Input: add support for key scan interface of the LPC32xx SoC Input: omap4-keypad - add device tree support Input: hanwang - add support for Art Master II tablet Input: spear_keyboard - reconfigure operating frequency on suspend Input: spear_keyboard - fix clock handling during suspend/resume Input: ff-memless - fix a couple min_t() casts Input: synaptics - print firmware ID and board number at init Input: spear_keyboard - generalize keyboard frequency configuration Input: spear_keyboard - rename bit definitions to reflect register Input: spear_keyboard - use correct io accessors Input: spear-keyboard - fix disable device_init_wakeup in remove Input: wacom_i2c - fix compiler warning Input: imx_keypad - check error returned by clk_prepare_enable() Input: imx_keypad - adapt the new kpp clock name Input: imx_keypad - use clk_prepare_enable/clk_disable_unprepare() Input: ad7879 - add option to correct xy axis Input: synaptics_usb - Remove TrackPoint name trailing whitespace Revert "Input: atmel_mxt_ts - warn if sysfs could not be created" Input: MT - Include win8 support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/miscLinus Torvalds authored
Pull spi updates from Mark Brown: "Since Grant is even more specacularly busy than usual for the time being I've been collecting SPI patches for him for this release - probably things will revert back to Grant before the next release. There's nothing too exciting here, mostly it's simple driver specific stuff: - Add spi: to the modaliases of SPI devices to provide namespacing. - A driver for AD-FMCOMMS1-EBZ. - DT binding for Orion. - Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers. There may be a few more fixes I've missed, people keep sending me new things." * tag 'spi-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/orion: remove uneeded spi_info spi/bcm63xx: fix clock configuration selection spi/orion: add device tree binding spi/omap2: mark omap2_mcspi_master_setup as __devinit spi: omap2-mcspi: Fix the below warning spi: Add AD-FMCOMMS1-EBZ I2C-SPI bridge driver spi/imx: use gpio_is_valid to determine if a gpio is valid spi/imx: remove redundant config.speed_hz setting spi/gpio: start with CS non-active spi: tegra: use dmaengine based dma driver spi/pl022: cleanup pl022 header documentation spi/pl022: enable runtime PM spi/pl022: delete DB5500 support spi/pl022: disable port when unused spi: Add "spi:" prefix to modalias attribute of spi devices
-
Hauke Mehrtens authored
Commit b9562545 ("bcma: complete workaround for BCMA43224 and BCM4313") introduced the wrong masks for setting the chip control registers - the "mask" parameter is inverse. It should be the mask of bits *not* changed, which is admittedly a bit non-intuitive. The incorrect mask not only causes the driver to not work correctly on the chips affected (eg the BCM43224 on the Macbook Air 4,2) but the state persists over a soft reset, causing the next boot to not necessarily see the device correctly. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Seth Forshee <seth.forshee@canonical.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Arend Van Spriel <arend@broadcom.com> Cc: Pieter-Paul Giesberts <pieterpg@broadcom.com> Cc: Brett Rudley <brudley@broadcom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc patches from Greg Kroah-Hartman: "Here's the "big" pull request for 3.6-rc1 for the char/misc drivers. It's really just a few updates to the mei driver, plus 4 other tiny patches, nothing big at all. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"> * tag 'char-misc-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: use module_pci_driver powerpc/BSR: cleanup the error path of bsr_init mei: mei_irq_thread_write_handler - line break fix mei: streamline the _mei_irq_thread_close/ioctol functions mei: introduce mei_data2slots wrapper mei: mei_wd_host_init: update the comment mei: remove write only wariable wd_due_counter mei: mei_device can be const for mei register access functions mei: revamp host buffer interface function mei: don't query HCSR for host buffer depth mei: group wd_interface_reg with watchdog variables within struct mei_device mei: mei_irq_thread_write_handler check for overflow mei: make mei_write_message more readable mei: check for error codes that mei_flow_ctrl_creds retuns misc: at25: Parse dt settings misc: hpilo: increase number of max supported channels mei: mei.txt: minor grammar fixes
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core changes from Greg Kroah-Hartman: "Here's the big driver core pull request for 3.6-rc1. Unlike 3.5, this kernel should be a lot tamer, with the printk changes now settled down. All we have here is some extcon driver updates, w1 driver updates, a few printk cleanups that weren't needed for 3.5, but are good to have now, and some other minor fixes/changes in the driver core. All of these have been in the linux-next releases for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"> * tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits) printk: Export struct log size and member offsets through vmcoreinfo Drivers: hv: Change the hex constant to a decimal constant driver core: don't trigger uevent after failure extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device sysfs: fail dentry revalidation after namespace change fix sysfs: fail dentry revalidation after namespace change extcon: spelling of detach in function doc extcon: arizona: Stop microphone detection if we give up on it extcon: arizona: Update cable reporting calls and split headset PM / Runtime: Do not increment device usage counts before probing kmsg - do not flush partial lines when the console is busy kmsg - export "continuation record" flag to /dev/kmsg kmsg - avoid warning for CONFIG_PRINTK=n compilations kmsg - properly print over-long continuation lines driver-core: Use kobj_to_dev instead of re-implementing it driver-core: Move kobj_to_dev from genhd.h to device.h driver core: Move deferred devices to the end of dpm_list before probing driver core: move uevent call to driver_register driver core: fix shutdown races with probe/remove(v3) Extcon: Arizona: Add driver for Wolfson Arizona class devices ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging tree patches from Greg Kroah-Hartman: "Here's the big staging tree merge for the 3.6-rc1 merge window. There are some patches in here outside of drivers/staging/, notibly the iio code (which is still stradeling the staging / not staging boundry), the pstore code, and the tracing code. All of these have gotten acks from the various subsystem maintainers to be included in this tree. The pstore and tracing patches are related, and are coming here as they replace one of the android staging drivers. Otherwise, the normal staging mess. Lots of cleanups and a few new drivers (some iio drivers, and the large csr wireless driver abomination.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"> Fixed up trivial conflicts in drivers/staging/comedi/drivers/s626.h and drivers/staging/gdm72xx/netlink_k.c * tag 'staging-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1108 commits) staging: csr: delete a bunch of unused library functions staging: csr: remove csr_utf16.c staging: csr: remove csr_pmem.h staging: csr: remove CsrPmemAlloc staging: csr: remove CsrPmemFree() staging: csr: remove CsrMemAllocDma() staging: csr: remove CsrMemCalloc() staging: csr: remove CsrMemAlloc() staging: csr: remove CsrMemFree() and CsrMemFreeDma() staging: csr: remove csr_util.h staging: csr: remove CsrOffSetOf() stating: csr: remove unneeded #includes in csr_util.c staging: csr: make CsrUInt16ToHex static staging: csr: remove CsrMemCpy() staging: csr: remove CsrStrLen() staging: csr: remove CsrVsnprintf() staging: csr: remove CsrStrDup staging: csr: remove CsrStrChr() staging: csr: remove CsrStrNCmp staging: csr: remove CsrStrCmp ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB patches from Greg Kroah-Hartman: "Here's the big USB patch set for the 3.6-rc1 merge window. Lots of little changes in here, primarily for gadget controllers and drivers. There's some scsi changes that I think also went in through the scsi tree, but they merge just fine. All of these patches have been in the linux-next tree for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"> Fix up trivial conflicts in include/scsi/scsi_device.h (same libata conflict that Jeff had already encountered) * tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams usb: Add quirk detection based on interface information usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer USB: add USB_VENDOR_AND_INTERFACE_INFO() macro USB: notify phy when root hub port connect change USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds USB: option: add ZTE MF821D USB: sierra: QMI mode MC7710 moved to qcserial USB: qcserial: adding Sierra Wireless devices USB: qcserial: support generic Qualcomm serial ports USB: qcserial: make probe more flexible USB: qcserial: centralize probe exit path USB: qcserial: consolidate usb_set_interface calls USB: ehci-s5p: Add support for device tree USB: ohci-exynos: Add support for device tree USB: ehci-omap: fix compile failure(v1) usb: host: tegra: pass correct pointer in ehci_setup() USB: ehci-fsl: Update ifdef check to work on 64-bit ppc USB: serial: keyspan: Removed unrequired parentheses. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
Pull libata updates from Jeff Garzik: "Notable changes: - Updating libata to directly bind with ACPI / runtime power mgmt. This is a pre-req for SATA ZPODD (CD-ROM power management). Touches ACPI (exports++) and SCSI in minor ways. Has been in linux-next for weeks. The rest of this should come via SCSI tree, as it involves a lot of updates to the 'sr' driver etc. Other, minor changes: - module_pci_driver() removes a lot of common boilerplate from each PCI driver - minor coding style, whitespace cleanups - pata_pcmcia bug fix, caught by Coccinelle - pata_imx, sata_dwc_460ex minor vendor updates - ahci_platform: use simple PM ops, and thereby add hibernation cb's - Add a few device-specific quirks" * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (23 commits) [libata] pata_cmd64x: whitespace cleanup libata-acpi: fix up for acpi_pm_device_sleep_state API sata_dwc_460ex: device tree may specify dma_channel ahci, trivial: fixed coding style issues related to braces ahci_platform: add hibernation callbacks libata-eh.c: local functions should not be exposed globally libata-transport.c: local functions should not be exposed globally sata_dwc_460ex: support hardreset ata: use module_pci_driver drivers/ata/pata_pcmcia.c: adjust suspicious bit operation pata_imx: Convert to clk_prepare_enable/clk_disable_unprepare ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2 [libata] Prevent interface errors with Seagate FreeAgent GoFlex drivers/acpi/glue: revert accidental license-related 6b66d958 bits libata-acpi: add missing inlines in libata.h libata: tell scsi layer device supports runtime power off libata: detect Device Attention support libata-acpi: register/unregister device to/from power resource libata-acpi: add ata port runtime D3Cold support libata-acpi: set acpi state for SATA port ...
-
- Jul 25, 2012
-
-
Chris Metcalf authored
The bombing to convert pci_bus.subordinate to busn_res.end accidentally modified a "struct pci_dev" site, causing this file not to compile. This commit reverts that code to use dev->subordinate again. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
-
Chris Metcalf authored
Yinghai Lu removed pci_bus.subordinate in pci-next, which meant that the tile-next changes to add tilegx PCI support don't build. This was expected (seen in linux-next) and this one-line fix is along the same lines as commit b918c62e for all other architectures. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
-
Jeff Garzik authored
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Stephen Rothwell authored
After merging the libata tree, today's [2012-07-01] linux-next build (x86_64 allmodconfig) failed like this: drivers/ata/libata-acpi.c: In function 'ata_acpi_set_state': drivers/ata/libata-acpi.c:872:5: error: too few arguments to function 'acpi_pm_device_sleep_state' include/acpi/acpi_bus.h:418:5: note: declared here Caused by commit 3bd46600 ("libata-acpi: add ata port runtime D3Cold support") from the libata tree interacting with commit ee85f543 ("ACPI/PM: specify lowest allowed state for device sleep state") from the pci tree. This patch adds ACPI_STATE_D3 as the new third parameter to acpi_pm_device_sleep_state() Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jeff Garzik authored
Two bits were appended to the end of the bitfield list in struct scsi_device. Resolve that conflict by including both bits. Conflicts: include/scsi/scsi_device.h
-
Thang Q. Nguyen authored
Only channel 0 is currently support and the driver code is fixed on channel 0. This patch lets device node specifying dma-channel in case it is not 0. If no dma-channel property is specified, channel 0 is used as default. Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jeff Layton authored
The readpages bug is a regression that was introduced in 6993f74a. This also fixes a couple of similar bugs in the uncached read and write codepaths. Also, prevent this sort of thing in the future by having cifsFileInfo_get take the spinlock itself, and adding a _locked variant for use in places that are already holding the lock. The _put code has always done that so this makes for a less confusing interface. Cc: <stable@vger.kernel.org> # 3.5.x Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
-
Jeffrin Jose authored
Fixed coding style issues related to braces found by checkpatch.pl in drivers/ata/ahci.c Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Shiraz Hashim authored
Use existing suspend, resume implementation for hibernation callbacks. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
H Hartley Sweeten authored
The function ata_ering_clear_cb is only referenced in this file and should be marked static to prevent it from being exposed globally. This quiets the sparse warning: warning: symbol 'ata_ering_clear_cb' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
H Hartley Sweeten authored
Functions not referenced outside of a source file should be marked static to prevent it from being exposed globally. This quiets the sparse warnings: warning: symbol 'ata_is_port' was not declared. Should it be static? warning: symbol 'ata_is_link' was not declared. Should it be static? warning: symbol 'ata_is_ata_dev' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Thang Q. Nguyen authored
The hardreset operation is currently not supported. This causes sometime the SATA driver does cause kernel crash because of none-determined state.a This patch will fix the issue. Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Axel Lin authored
This patch converts the drivers in drivers/ata/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Mikael Pettersson <mikpe@it.uu.se> Cc: Mark Lord <kernel@teksavvy.com> Cc: Jeremy Higdon <jeremy@sgi.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Julia Lawall authored
IO_DATA_PATH_WIDTH_8 is 0, so a bit-and with it is always false. The value IO_DATA_PATH_WIDTH covers the bits of the IO_DATA_PATH constants, so first pick those bits and then make the test using !=. This problem was found using Coccinelle (http://coccinelle.lip6.fr/ ). Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Fabio Estevam authored
With the new i.mx clock framework, we need to use clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Mark Nelson authored
Like e65cc194 (ahci: Enable SB600 64bit DMA on MSI K9A2 Platinum) and 3c4aa91f (ahci: Enable SB600 64bit DMA on Asus M3A), this patch enables 64bit DMA for the AHCI SATA controller of another board that has the SB600 southbridge. In this case though we're enabling 64bit DMA for another MSI motherboard, the K9AGM2 or MS-7327. It is new enough that all of the BIOS releases since the initial release (1.0 from 2007-02-09) work correctly with 64bit DMA enabled. Signed-off-by: Mark Nelson <mdnelson8@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Daniel J Blueman authored
When using my Seagate FreeAgent GoFlex eSATAp external disk enclosure, interface errors are always seen until 1.5Gbps is negotiated [1]. This occurs using any disk in the enclosure, and when the disk is connected directly with a generic passive eSATAp cable, we see stable 3Gbps operation as expected. Blacklist 3Gbps mode to avoid dataloss and the ~30s delay bus reset and renegotiation incurs. Signed-off-by: Daniel J Blueman <daniel@quora.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jeff Garzik authored
Commit 6b66d958 should not have changed EXPORT_SYMBOL_GPL to EXPORT_SYMBOL. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Lin Ming authored
Adds inline for ata_acpi_unregister/ata_acpi_bind/ata_acpi_unbind in drivers/ata/libata.h for !CONFIG_ATA_ACPI to fix below warnings. warning: 'ata_acpi_unregister' defined but not used [-Wunused-function] warning: 'ata_acpi_bind' defined but not used [-Wunused-function] warning: 'ata_acpi_unbind' defined but not used [-Wunused-function] Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dmitry Torokhov authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull first round of SCSI updates from James Bottomley: "The most important feature of this patch set is the new async infrastructure that makes sure async_synchronize_full() synchronizes all domains and allows us to remove all the hacks (like having scsi_complete_async_scans() in the device base code) and means that the async infrastructure will "just work" in future. The rest is assorted driver updates (aacraid, bnx2fc, virto-scsi, megaraid, bfa, lpfc, qla2xxx, qla4xxx) plus a lot of infrastructure work in sas and FC. Signed-off-by: James Bottomley <JBottomley@Parallels.com>"> * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits) [SCSI] Revert "[SCSI] fix async probe regression" [SCSI] cleanup usages of scsi_complete_async_scans [SCSI] queue async scan work to an async_schedule domain [SCSI] async: make async_synchronize_full() flush all work regardless of domain [SCSI] async: introduce 'async_domain' type [SCSI] bfa: Fix to set correct return error codes and misc cleanup. [SCSI] aacraid: Series 7 Async. (performance) mode support [SCSI] aha152x: Allow use on 64bit systems [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning [SCSI] bfa: squelch lockdep complaint with a spin_lock_init [SCSI] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP [SCSI] qla4xxx: remove unnecessary read of PCI_CAP_ID_EXP [SCSI] ufs: fix incorrect return value about SUCCESS and FAILED [SCSI] ufs: reverse the ufshcd_is_device_present logic [SCSI] ufs: use module_pci_driver [SCSI] usb-storage: update usb devices for write cache quirk in quirk list. [SCSI] usb-storage: add support for write cache quirk [SCSI] set to WCE if usb cache quirk is present. [SCSI] virtio-scsi: hotplug support for virtio-scsi [SCSI] virtio-scsi: split scatterlist per target ...
-