diff --git a/CREDITS b/CREDITS index 077b147388bd593c971ec2643e0c8b9ecd194b65..c62dcb3b7e2621d918815a656f2682fda044afcb 100644 --- a/CREDITS +++ b/CREDITS @@ -317,6 +317,14 @@ S: 2322 37th Ave SW S: Seattle, Washington 98126-2010 S: USA +N: Muli Ben-Yehuda +E: mulix@mulix.org +E: muli@il.ibm.com +W: http://www.mulix.org +D: trident OSS sound driver, x86-64 dma-ops and Calgary IOMMU, +D: KVM and Xen bits and other misc. hackery. +S: Haifa, Israel + N: Johannes Berg E: johannes@sipsolutions.net W: http://johannes.sipsolutions.net/ diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 1977fab386566e23f501bea233f8f487d16f5c38..5b5aba404aacb69160f0d88301be0a76aea78682 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -89,8 +89,6 @@ cciss.txt - info, major/minor #'s for Compaq's SMART Array Controllers. cdrom/ - directory with information on the CD-ROM drivers that Linux has. -cli-sti-removal.txt - - cli()/sti() removal guide. computone.txt - info on Computone Intelliport II/Plus Multiport Serial Driver. connector/ @@ -361,8 +359,6 @@ telephony/ - directory with info on telephony (e.g. voice over IP) support. time_interpolators.txt - info on time interpolators. -tipar.txt - - information about Parallel link cable for Texas Instruments handhelds. tty.txt - guide to the locking policies of the tty layer. uml/ diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator new file mode 100644 index 0000000000000000000000000000000000000000..79a4a75b2d2ceb7af8e07c3efa6289c3722d6342 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -0,0 +1,315 @@ +What: /sys/class/regulator/.../state +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + state. This holds the regulator output state. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'unknown' + + 'enabled' means the regulator output is ON and is supplying + power to the system. + + 'disabled' means the regulator output is OFF and is not + supplying power to the system.. + + 'unknown' means software cannot determine the state. + + NOTE: this field can be used in conjunction with microvolts + and microamps to determine regulator output levels. + + +What: /sys/class/regulator/.../type +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + type. This holds the regulator type. + + This will be one of the following strings: + + 'voltage' + 'current' + 'unknown' + + 'voltage' means the regulator output voltage can be controlled + by software. + + 'current' means the regulator output current limit can be + controlled by software. + + 'unknown' means software cannot control either voltage or + current limit. + + +What: /sys/class/regulator/.../microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + microvolts. This holds the regulator output voltage setting + measured in microvolts (i.e. E-6 Volts). + + NOTE: This value should not be used to determine the regulator + output voltage level as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + microamps. This holds the regulator output current limit + setting measured in microamps (i.e. E-6 Amps). + + NOTE: This value should not be used to determine the regulator + output current level as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../opmode +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + opmode. This holds the regulator operating mode setting. + + The opmode value can be one of the following strings: + + 'fast' + 'normal' + 'idle' + 'standby' + 'unknown' + + The modes are described in include/linux/regulator/regulator.h + + NOTE: This value should not be used to determine the regulator + output operating mode as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../min_microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + min_microvolts. This holds the minimum safe working regulator + output voltage setting for this domain measured in microvolts. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no min microvolts constraint defined by + platform code. + + +What: /sys/class/regulator/.../max_microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + max_microvolts. This holds the maximum safe working regulator + output voltage setting for this domain measured in microvolts. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no max microvolts constraint defined by + platform code. + + +What: /sys/class/regulator/.../min_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + min_microamps. This holds the minimum safe working regulator + output current limit setting for this domain measured in + microamps. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no min microamps constraint defined by + platform code. + + +What: /sys/class/regulator/.../max_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + max_microamps. This holds the maximum safe working regulator + output current limit setting for this domain measured in + microamps. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no max microamps constraint defined by + platform code. + + +What: /sys/class/regulator/.../num_users +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + num_users. This holds the number of consumer devices that + have called regulator_enable() on this regulator. + + +What: /sys/class/regulator/.../requested_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + requested_microamps. This holds the total requested load + current in microamps for this regulator from all its consumer + devices. + + +What: /sys/class/regulator/.../parent +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Some regulator directories will contain a link called parent. + This points to the parent or supply regulator if one exists. + +What: /sys/class/regulator/.../suspend_mem_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_mem_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to memory. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to memory voltage defined by + platform code. + +What: /sys/class/regulator/.../suspend_disk_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_disk_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to disk. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to disk voltage defined by + platform code. + +What: /sys/class/regulator/.../suspend_standby_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_standby_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to standby. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to standby voltage defined by + platform code. + +What: /sys/class/regulator/.../suspend_mem_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_mem_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to + memory. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to memory mode defined by + platform code. + +What: /sys/class/regulator/.../suspend_disk_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_disk_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to disk. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to disk mode defined by + platform code. + +What: /sys/class/regulator/.../suspend_standby_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_standby_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to + standby. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to standby mode defined by + platform code. + +What: /sys/class/regulator/.../suspend_mem_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_mem_state. This holds the regulator operating state + when suspended to memory. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'not defined' + +What: /sys/class/regulator/.../suspend_disk_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_disk_state. This holds the regulator operating state + when suspended to disk. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'not defined' + +What: /sys/class/regulator/.../suspend_standby_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_standby_state. This holds the regulator operating + state when suspended to standby. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'not defined' diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory new file mode 100644 index 0000000000000000000000000000000000000000..7a16fe1e2270d8e7353b209bd0dad24a5ce9b69e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-memory @@ -0,0 +1,24 @@ +What: /sys/devices/system/memory +Date: June 2008 +Contact: Badari Pulavarty +Description: + The /sys/devices/system/memory contains a snapshot of the + internal state of the kernel memory blocks. Files could be + added or removed dynamically to represent hot-add/remove + operations. + +Users: hotplug memory add/remove tools + https://w3.opensource.ibm.com/projects/powerpc-utils/ + +What: /sys/devices/system/memory/memoryX/removable +Date: June 2008 +Contact: Badari Pulavarty +Description: + The file /sys/devices/system/memory/memoryX/removable + indicates whether this memory block is removable or not. + This is useful for a user-level agent to determine + identify removable sections of the memory before attempting + potentially expensive hot-remove memory operation + +Users: hotplug memory remove tools + https://w3.opensource.ibm.com/projects/powerpc-utils/ diff --git a/Documentation/ABI/testing/sysfs-kernel-mm b/Documentation/ABI/testing/sysfs-kernel-mm new file mode 100644 index 0000000000000000000000000000000000000000..190d523ac159f64c97ae7355f230c46f564e5f6b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-mm @@ -0,0 +1,6 @@ +What: /sys/kernel/mm +Date: July 2008 +Contact: Nishanth Aravamudan , VM maintainers +Description: + /sys/kernel/mm/ should contain any and all VM + related information in /sys/kernel/. diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-hugepages b/Documentation/ABI/testing/sysfs-kernel-mm-hugepages new file mode 100644 index 0000000000000000000000000000000000000000..e21c00571cf4f082b04f12b168e376c500bd845d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-mm-hugepages @@ -0,0 +1,15 @@ +What: /sys/kernel/mm/hugepages/ +Date: June 2008 +Contact: Nishanth Aravamudan , hugetlb maintainers +Description: + /sys/kernel/mm/hugepages/ contains a number of subdirectories + of the form hugepages-kB, where is the page size + of the hugepages supported by the kernel/CPU combination. + + Under these directories are a number of files: + nr_hugepages + nr_overcommit_hugepages + free_hugepages + surplus_hugepages + resv_hugepages + See Documentation/vm/hugetlbpage.txt for details. diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 6caa146155788c8a67fc940c1879f2faf4fac1bb..1875e502f87205a1dcaf268d0af78127ee336144 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -474,25 +474,29 @@ make a good program). So, you can either get rid of GNU emacs, or change it to use saner values. To do the latter, you can stick the following in your .emacs file: -(defun linux-c-mode () - "C mode with adjusted defaults for use with the Linux kernel." - (interactive) - (c-mode) - (c-set-style "K&R") - (setq tab-width 8) - (setq indent-tabs-mode t) - (setq c-basic-offset 8)) - -This will define the M-x linux-c-mode command. When hacking on a -module, if you put the string -*- linux-c -*- somewhere on the first -two lines, this mode will be automatically invoked. Also, you may want -to add - -(setq auto-mode-alist (cons '("/usr/src/linux.*/.*\\.[ch]$" . linux-c-mode) - auto-mode-alist)) - -to your .emacs file if you want to have linux-c-mode switched on -automagically when you edit source files under /usr/src/linux. +(defun c-lineup-arglist-tabs-only (ignored) + "Line up argument lists by tabs, not spaces" + (let* ((anchor (c-langelem-pos c-syntactic-element)) + (column (c-langelem-2nd-pos c-syntactic-element)) + (offset (- (1+ column) anchor)) + (steps (floor offset c-basic-offset))) + (* (max steps 1) + c-basic-offset))) + +(add-hook 'c-mode-hook + (lambda () + (let ((filename (buffer-file-name))) + ;; Enable kernel mode for the appropriate files + (when (and filename + (string-match "~/src/linux-trees" filename)) + (setq indent-tabs-mode t) + (c-set-style "linux") + (c-set-offset 'arglist-cont-nonempty + '(c-lineup-gcc-asm-reg + c-lineup-arglist-tabs-only)))))) + +This will make emacs go better with the kernel coding style for C +files below ~/src/linux-trees. But even if you fail in getting emacs to do sane formatting, not everything is lost: use "indent". diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index 80d150458c80c5ac7f7f5f75b3e6ff8a602a19ca..d8b63d164e41193927af2c7fb41dcb0893f57878 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -298,10 +298,10 @@ recommended that you never use these unless you really know what the cache width is. int -dma_mapping_error(dma_addr_t dma_addr) +dma_mapping_error(struct device *dev, dma_addr_t dma_addr) int -pci_dma_mapping_error(dma_addr_t dma_addr) +pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr) In some circumstances dma_map_single and dma_map_page will fail to create a mapping. A driver can check for these errors by testing the returned diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 0eb0d027eb32e139f442eb30e3b92a7560112bed..1615350b7b53b4b681ed187e176e896ca0b0845e 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -12,7 +12,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ - mac80211.xml debugobjects.xml + mac80211.xml debugobjects.xml sh.xml ### # The build process is as follows (targets): @@ -102,6 +102,13 @@ C-procfs-example = procfs_example.xml C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example)) $(obj)/procfs-guide.xml: $(C-procfs-example2) +# List of programs to build +##oops, this is a kernel module::hostprogs-y := procfs_example +obj-m += procfs_example.o + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \ exit 1 db2xtemplate = db2TYPE -o $(dir $@) $< diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl index 2510763295d09dfbd893e288d1948c9b05feda4d..084f6ad7b7a0a4729b85aea3cc5c3e6eb6557689 100644 --- a/Documentation/DocBook/kernel-locking.tmpl +++ b/Documentation/DocBook/kernel-locking.tmpl @@ -219,10 +219,10 @@ - Three Main Types of Kernel Locks: Spinlocks, Mutexes and Semaphores + Two Main Types of Kernel Locks: Spinlocks and Mutexes - There are three main types of kernel locks. The fundamental type + There are two main types of kernel locks. The fundamental type is the spinlock (include/asm/spinlock.h), which is a very simple single-holder lock: if you can't get the @@ -239,14 +239,6 @@ can't sleep (see ), and so have to use a spinlock instead. - - The third type is a semaphore - (include/linux/semaphore.h): it - can have more than one holder at any time (the number decided at - initialization time), although it is most commonly used as a - single-holder lock (a mutex). If you can't get a semaphore, your - task will be suspended and later on woken up - just like for mutexes. - Neither type of lock is recursive: see . @@ -278,7 +270,7 @@ - Semaphores still exist, because they are required for + Mutexes still exist, because they are required for synchronization between user contexts, as we will see below. @@ -289,18 +281,17 @@ If you have a data structure which is only ever accessed from - user context, then you can use a simple semaphore - (linux/linux/semaphore.h) to protect it. This - is the most trivial case: you initialize the semaphore to the number - of resources available (usually 1), and call - down_interruptible() to grab the semaphore, and - up() to release it. There is also a - down(), which should be avoided, because it + user context, then you can use a simple mutex + (include/linux/mutex.h) to protect it. This + is the most trivial case: you initialize the mutex. Then you can + call mutex_lock_interruptible() to grab the mutex, + and mutex_unlock() to release it. There is also a + mutex_lock(), which should be avoided, because it will not return if a signal is received. - Example: linux/net/core/netfilter.c allows + Example: net/netfilter/nf_sockopt.c allows registration of new setsockopt() and getsockopt() calls, with nf_register_sockopt(). Registration and @@ -515,7 +506,7 @@ If you are in a process context (any syscall) and want to - lock other process out, use a semaphore. You can take a semaphore + lock other process out, use a mutex. You can take a mutex and sleep (copy_from_user*( or kmalloc(x,GFP_KERNEL)). @@ -662,7 +653,7 @@ SLBH SLBH SLBH -DI +MLI None @@ -692,8 +683,8 @@ spin_lock_bh -DI -down_interruptible +MLI +mutex_lock_interruptible @@ -1310,7 +1301,7 @@ as Alan Cox says, Lock data, not code. There is a coding bug where a piece of code tries to grab a spinlock twice: it will spin forever, waiting for the lock to - be released (spinlocks, rwlocks and semaphores are not + be released (spinlocks, rwlocks and mutexes are not recursive in Linux). This is trivial to diagnose: not a stay-up-five-nights-talk-to-fluffy-code-bunnies kind of problem. @@ -1335,7 +1326,7 @@ as Alan Cox says, Lock data, not code. This complete lockup is easy to diagnose: on SMP boxes the - watchdog timer or compiling with DEBUG_SPINLOCKS set + watchdog timer or compiling with DEBUG_SPINLOCK set (include/linux/spinlock.h) will show this up immediately when it happens. @@ -1558,7 +1549,7 @@ the amount of locking which needs to be done. Read/Write Lock Variants - Both spinlocks and semaphores have read/write variants: + Both spinlocks and mutexes have read/write variants: rwlock_t and struct rw_semaphore. These divide users into two classes: the readers and the writers. If you are only reading the data, you can get a read lock, but to write to @@ -1681,7 +1672,7 @@ the amount of locking which needs to be done. #include <linux/slab.h> #include <linux/string.h> +#include <linux/rcupdate.h> - #include <linux/semaphore.h> + #include <linux/mutex.h> #include <asm/errno.h> struct object @@ -1913,7 +1904,7 @@ machines due to caching. - put_user() + put_user() @@ -1927,13 +1918,13 @@ machines due to caching. - down_interruptible() and - down() + mutex_lock_interruptible() and + mutex_lock() - There is a down_trylock() which can be + There is a mutex_trylock() which can be used inside interrupt context, as it will not sleep. - up() will also never sleep. + mutex_unlock() will also never sleep. @@ -2023,7 +2014,7 @@ machines due to caching. Prior to 2.5, or when CONFIG_PREEMPT is unset, processes in user context inside the kernel would not - preempt each other (ie. you had that CPU until you have it up, + preempt each other (ie. you had that CPU until you gave it up, except for interrupts). With the addition of CONFIG_PREEMPT in 2.5.4, this changed: when in user context, higher priority tasks can "cut in": spinlocks diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index e8acd1f034567b217f9e9998f5bc05b4c24e276e..372dec20c8dab6db05fbbcd9e3cdef93f1e783a5 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -98,6 +98,24 @@ "Kernel debugging" select "KGDB: kernel debugging with remote gdb". + It is advised, but not required that you turn on the + CONFIG_FRAME_POINTER kernel option. This option inserts code to + into the compiled executable which saves the frame information in + registers or on the stack at different points which will allow a + debugger such as gdb to more accurately construct stack back traces + while debugging the kernel. + + + If the architecture that you are using supports the kernel option + CONFIG_DEBUG_RODATA, you should consider turning it off. This + option will prevent the use of software breakpoints because it + marks certain regions of the kernel's memory space as read-only. + If kgdb supports it for the architecture you are using, you can + use hardware breakpoints if you desire to run with the + CONFIG_DEBUG_RODATA option turned on, else you need to turn off + this option. + + Next you should choose one of more I/O drivers to interconnect debugging host and debugged target. Early boot debugging requires a KGDB I/O driver that supports early debugging and the driver must be diff --git a/Documentation/DocBook/procfs-guide.tmpl b/Documentation/DocBook/procfs-guide.tmpl index 1fd6a1ec7591d5f4179cdf2a641f1b055c1f486a..8a5dc6e021ffa8b16b6dc2f997e115e77b1aaf70 100644 --- a/Documentation/DocBook/procfs-guide.tmpl +++ b/Documentation/DocBook/procfs-guide.tmpl @@ -29,12 +29,12 @@ - 1.0  + 1.0 May 30, 2001 Initial revision posted to linux-kernel - 1.1  + 1.1 June 3, 2001 Revised after comments from linux-kernel diff --git a/Documentation/DocBook/procfs_example.c b/Documentation/DocBook/procfs_example.c index 7064084c1c5e4ce6b10f64971a5d7cd2d009f5d1..2f3de0fb83651779e3c849c8ec2c9706c13a2ac4 100644 --- a/Documentation/DocBook/procfs_example.c +++ b/Documentation/DocBook/procfs_example.c @@ -189,8 +189,6 @@ static int __init init_procfs_example(void) return 0; no_symlink: - remove_proc_entry("tty", example_dir); -no_tty: remove_proc_entry("bar", example_dir); no_bar: remove_proc_entry("foo", example_dir); @@ -206,7 +204,6 @@ static int __init init_procfs_example(void) static void __exit cleanup_procfs_example(void) { remove_proc_entry("jiffies_too", example_dir); - remove_proc_entry("tty", example_dir); remove_proc_entry("bar", example_dir); remove_proc_entry("foo", example_dir); remove_proc_entry("jiffies", example_dir); @@ -222,3 +219,4 @@ module_exit(cleanup_procfs_example); MODULE_AUTHOR("Erik Mouw"); MODULE_DESCRIPTION("procfs examples"); +MODULE_LICENSE("GPL"); diff --git a/Documentation/DocBook/s390-drivers.tmpl b/Documentation/DocBook/s390-drivers.tmpl index 4acc73240a6d536ef044bf1dfc5a2abd6ae4296f..95bfc12e5439d572f02e924f887802fd273bcf96 100644 --- a/Documentation/DocBook/s390-drivers.tmpl +++ b/Documentation/DocBook/s390-drivers.tmpl @@ -100,7 +100,7 @@ the hardware structures represented here, please consult the Principles of Operation. -!Iinclude/asm-s390/cio.h +!Iarch/s390/include/asm/cio.h ccw devices @@ -114,7 +114,7 @@ ccw device structure. Device drivers must not bypass those functions or strange side effects may happen. -!Iinclude/asm-s390/ccwdev.h +!Iarch/s390/include/asm/ccwdev.h !Edrivers/s390/cio/device.c !Edrivers/s390/cio/device_ops.c @@ -125,7 +125,7 @@ measurement data which is made available by the channel subsystem for each channel attached device. -!Iinclude/asm-s390/cmb.h +!Iarch/s390/include/asm/cmb.h !Edrivers/s390/cio/cmf.c @@ -142,7 +142,7 @@ ccw group devices -!Iinclude/asm-s390/ccwgroup.h +!Iarch/s390/include/asm/ccwgroup.h !Edrivers/s390/cio/ccwgroup.c diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl new file mode 100644 index 0000000000000000000000000000000000000000..0c3dc4c69dd11f7c6a7b65877420395cad59bc6b --- /dev/null +++ b/Documentation/DocBook/sh.tmpl @@ -0,0 +1,105 @@ + + + + + + SuperH Interfaces Guide + + + + Paul + Mundt + +
+ lethal@linux-sh.org +
+ + + + + + 2008 + Paul Mundt + + + 2008 + Renesas Technology Corp. + + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2 as published by the Free Software Foundation. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + For more details see the file COPYING in the source + distribution of Linux. + + + + + + + + Memory Management + + SH-4 + + Store Queue API +!Earch/sh/kernel/cpu/sh4/sq.c + + + + SH-5 + + TLB Interfaces +!Iarch/sh/mm/tlb-sh5.c +!Iarch/sh/include/asm/tlb_64.h + + + + + Clock Framework Extensions +!Iarch/sh/include/asm/clock.h + + + Machine Specific Interfaces + + mach-dreamcast +!Iarch/sh/boards/mach-dreamcast/rtc.c + + + mach-x3proto +!Earch/sh/boards/mach-x3proto/ilsel.c + + + + Busses + + SuperHyway +!Edrivers/sh/superhyway/superhyway.c + + + + Maple +!Edrivers/sh/maple/maple.c + + + diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl index 89817795e668d438d3ea64f9dd37cfa9d0e55785..0bc25949b66837a0c538cb2dd3de9f43a9446dd8 100644 --- a/Documentation/DocBook/videobook.tmpl +++ b/Documentation/DocBook/videobook.tmpl @@ -1648,7 +1648,7 @@ static struct video_buffer capture_fb; Public Functions Provided -!Edrivers/media/video/videodev.c +!Edrivers/media/video/v4l2-dev.c diff --git a/Documentation/DocBook/z8530book.tmpl b/Documentation/DocBook/z8530book.tmpl index 42c75ba71ba220fed7976b30d9d601a806cf2ae6..a42a8a4c76890db386c3c4f36a140acf5e2de1d0 100644 --- a/Documentation/DocBook/z8530book.tmpl +++ b/Documentation/DocBook/z8530book.tmpl @@ -69,12 +69,6 @@ device to be used as both a tty interface and as a synchronous controller is a project for Linux post the 2.4 release - - The support code handles most common card configurations and - supports running both Cisco HDLC and Synchronous PPP. With extra - glue the frame relay and X.25 protocols can also be used with this - driver. - @@ -179,35 +173,27 @@ If you wish to use the network interface facilities of the driver, then you need to attach a network device to each channel that is - present and in use. In addition to use the SyncPPP and Cisco HDLC + present and in use. In addition to use the generic HDLC you need to follow some additional plumbing rules. They may seem complex but a look at the example hostess_sv11 driver should reassure you. The network device used for each channel should be pointed to by - the netdevice field of each channel. The dev-> priv field of the + the netdevice field of each channel. The hdlc-> priv field of the network device points to your private data - you will need to be - able to find your ppp device from this. In addition to use the - sync ppp layer the private data must start with a void * pointer - to the syncppp structures. + able to find your private data from this. The way most drivers approach this particular problem is to create a structure holding the Z8530 device definition and - put that and the syncppp pointer into the private field of - the network device. The network device fields of the channels - then point back to the network devices. The ppp_device can also - be put in the private structure conveniently. + put that into the private field of the network device. The + network device fields of the channels then point back to the + network devices. - If you wish to use the synchronous ppp then you need to attach - the syncppp layer to the network device. You should do this before - you register the network device. The - sppp_attach requires that the first void * - pointer in your private data is pointing to an empty struct - ppp_device. The function fills in the initial data for the - ppp/hdlc layer. + If you wish to use the generic HDLC then you need to register + the HDLC device. Before you register your network device you will also need to @@ -314,10 +300,10 @@ buffer in sk_buff format and queues it for transmission. The caller must provide the entire packet with the exception of the bitstuffing and CRC. This is normally done by the caller via - the syncppp interface layer. It returns 0 if the buffer has been - queued and non zero values for queue full. If the function accepts - the buffer it becomes property of the Z8530 layer and the caller - should not free it. + the generic HDLC interface layer. It returns 0 if the buffer has been + queued and non zero values for queue full. If the function accepts + the buffer it becomes property of the Z8530 layer and the caller + should not free it. The function z8530_get_stats returns a pointer diff --git a/Documentation/Intel-IOMMU.txt b/Documentation/Intel-IOMMU.txt index c2321903aa09adea7f64c00d300814cc32229d1f..21bc416d887efdfabfe4c03b22639b225d72909c 100644 --- a/Documentation/Intel-IOMMU.txt +++ b/Documentation/Intel-IOMMU.txt @@ -48,7 +48,7 @@ IOVA generation is pretty generic. We used the same technique as vmalloc() but these are not global address spaces, but separate for each domain. Different DMA engines may support different number of domains. -We also allocate gaurd pages with each mapping, so we can attempt to catch +We also allocate guard pages with each mapping, so we can attempt to catch any overflow that might happen. @@ -112,4 +112,4 @@ TBD - For compatibility testing, could use unity map domain for all devices, just provide a 1-1 for all useful memory under a single domain for all devices. -- API for paravirt ops for abstracting functionlity for VMM folks. +- API for paravirt ops for abstracting functionality for VMM folks. diff --git a/Documentation/Makefile b/Documentation/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..94b9457335344eb6b82fb06759e10f89ab037f25 --- /dev/null +++ b/Documentation/Makefile @@ -0,0 +1,3 @@ +obj-m := DocBook/ accounting/ auxdisplay/ connector/ \ + filesystems/configfs/ ia64/ networking/ \ + pcmcia/ spi/ video4linux/ vm/ watchdog/src/ diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 118ca6e9404f47ded06c7ee3a287003d00377e56..f79ad9ff6031aa4ee622d9f0be3e0c1604e2d14b 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -528,7 +528,33 @@ See more details on the proper patch format in the following references. +16) Sending "git pull" requests (from Linus emails) +Please write the git repo address and branch name alone on the same line +so that I can't even by mistake pull from the wrong branch, and so +that a triple-click just selects the whole thing. + +So the proper format is something along the lines of: + + "Please pull from + + git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus + + to get these changes:" + +so that I don't have to hunt-and-peck for the address and inevitably +get it wrong (actually, I've only gotten it wrong a few times, and +checking against the diffstat tells me when I get it wrong, but I'm +just a lot more comfortable when I don't have to "look for" the right +thing to pull, and double-check that I have the right branch-name). + + +Please use "git diff -M --stat --summary" to generate the diffstat: +the -M enables rename detection, and the summary enables a summary of +new/deleted or renamed files. + +With rename detection, the statistics are rather different [...] +because git will notice that a fair number of the changes are renames. ----------------------------------- SECTION 2 - HINTS, TIPS, AND TRICKS diff --git a/Documentation/accounting/Makefile b/Documentation/accounting/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..31929eb875b19e9ce6898a53719fd2b0797c5f46 --- /dev/null +++ b/Documentation/accounting/Makefile @@ -0,0 +1,10 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := getdelays + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_getdelays.o += -I$(objtree)/usr/include diff --git a/Documentation/accounting/delay-accounting.txt b/Documentation/accounting/delay-accounting.txt index 1443cd71d2631241f13286e544296ef286d91c90..8a12f0730c94da018615aebc8e657daf65eadd80 100644 --- a/Documentation/accounting/delay-accounting.txt +++ b/Documentation/accounting/delay-accounting.txt @@ -11,6 +11,7 @@ the delays experienced by a task while a) waiting for a CPU (while being runnable) b) completion of synchronous block I/O initiated by the task c) swapping in pages +d) memory reclaim and makes these statistics available to userspace through the taskstats interface. @@ -41,7 +42,7 @@ this structure. See include/linux/taskstats.h for a description of the fields pertaining to delay accounting. It will generally be in the form of counters returning the cumulative -delay seen for cpu, sync block I/O, swapin etc. +delay seen for cpu, sync block I/O, swapin, memory reclaim etc. Taking the difference of two successive readings of a given counter (say cpu_delay_total) for a task will give the delay @@ -94,7 +95,9 @@ CPU count real total virtual total delay total 7876 92005750 100000000 24001500 IO count delay total 0 0 -MEM count delay total +SWAP count delay total + 0 0 +RECLAIM count delay total 0 0 Get delays seen in executing a given simple command @@ -108,5 +111,7 @@ CPU count real total virtual total delay total 6 4000250 4000000 0 IO count delay total 0 0 -MEM count delay total +SWAP count delay total + 0 0 +RECLAIM count delay total 0 0 diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c index 40121b5cca14cab3993000c53078ef2d8484f001..cc49400b4af899abf34b30cf955b52d378617948 100644 --- a/Documentation/accounting/getdelays.c +++ b/Documentation/accounting/getdelays.c @@ -196,14 +196,24 @@ void print_delayacct(struct taskstats *t) " %15llu%15llu%15llu%15llu\n" "IO %15s%15s\n" " %15llu%15llu\n" - "MEM %15s%15s\n" + "SWAP %15s%15s\n" + " %15llu%15llu\n" + "RECLAIM %12s%15s\n" " %15llu%15llu\n", "count", "real total", "virtual total", "delay total", - t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total, - t->cpu_delay_total, + (unsigned long long)t->cpu_count, + (unsigned long long)t->cpu_run_real_total, + (unsigned long long)t->cpu_run_virtual_total, + (unsigned long long)t->cpu_delay_total, + "count", "delay total", + (unsigned long long)t->blkio_count, + (unsigned long long)t->blkio_delay_total, + "count", "delay total", + (unsigned long long)t->swapin_count, + (unsigned long long)t->swapin_delay_total, "count", "delay total", - t->blkio_count, t->blkio_delay_total, - "count", "delay total", t->swapin_count, t->swapin_delay_total); + (unsigned long long)t->freepages_count, + (unsigned long long)t->freepages_delay_total); } void task_context_switch_counts(struct taskstats *t) @@ -211,14 +221,17 @@ void task_context_switch_counts(struct taskstats *t) printf("\n\nTask %15s%15s\n" " %15llu%15llu\n", "voluntary", "nonvoluntary", - t->nvcsw, t->nivcsw); + (unsigned long long)t->nvcsw, (unsigned long long)t->nivcsw); } void print_cgroupstats(struct cgroupstats *c) { printf("sleeping %llu, blocked %llu, running %llu, stopped %llu, " - "uninterruptible %llu\n", c->nr_sleeping, c->nr_io_wait, - c->nr_running, c->nr_stopped, c->nr_uninterruptible); + "uninterruptible %llu\n", (unsigned long long)c->nr_sleeping, + (unsigned long long)c->nr_io_wait, + (unsigned long long)c->nr_running, + (unsigned long long)c->nr_stopped, + (unsigned long long)c->nr_uninterruptible); } diff --git a/Documentation/accounting/taskstats-struct.txt b/Documentation/accounting/taskstats-struct.txt index cd784f46bf8abefb9ed24257aaf5fcf4df2ecb00..e7512c061c1572f5127b7bb861ded0f0515bc6af 100644 --- a/Documentation/accounting/taskstats-struct.txt +++ b/Documentation/accounting/taskstats-struct.txt @@ -6,7 +6,7 @@ This document contains an explanation of the struct taskstats fields. There are three different groups of fields in the struct taskstats: 1) Common and basic accounting fields - If CONFIG_TASKSTATS is set, the taskstats inteface is enabled and + If CONFIG_TASKSTATS is set, the taskstats interface is enabled and the common fields and basic accounting fields are collected for delivery at do_exit() of a task. 2) Delay accounting fields @@ -26,6 +26,8 @@ There are three different groups of fields in the struct taskstats: 5) Time accounting for SMT machines +6) Extended delay accounting fields for memory reclaim + Future extension should add fields to the end of the taskstats struct, and should not change the relative position of each field within the struct. @@ -170,4 +172,9 @@ struct taskstats { __u64 ac_utimescaled; /* utime scaled on frequency etc */ __u64 ac_stimescaled; /* stime scaled on frequency etc */ __u64 cpu_scaled_run_real_total; /* scaled cpu_run_real_total */ + +6) Extended delay accounting fields for memory reclaim + /* Delay waiting for memory reclaim */ + __u64 freepages_count; + __u64 freepages_delay_total; } diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx index 43edb4ecf27dbdd7138ea3c969f4c45cbcd720c7..72fbcc4fcab095fd61a886d3d542692a6f94d21e 100644 --- a/Documentation/arm/IXP4xx +++ b/Documentation/arm/IXP4xx @@ -32,7 +32,7 @@ Linux currently supports the following features on the IXP4xx chips: - Flash access (MTD/JFFS) - I2C through GPIO on IXP42x - GPIO for input/output/interrupts - See include/asm-arm/arch-ixp4xx/platform.h for access functions. + See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions. - Timers (watchdog, OS) The following components of the chips are not supported by Linux and diff --git a/Documentation/arm/Interrupts b/Documentation/arm/Interrupts index 0d3dbf1099bcc90cae1b364002ef32e15dcdc06a..f09ab1b90ef1b486bb55273a53590b22fb8193fa 100644 --- a/Documentation/arm/Interrupts +++ b/Documentation/arm/Interrupts @@ -138,14 +138,8 @@ So, what's changed? Set active the IRQ edge(s)/level. This replaces the SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge() - function. Type should be one of the following: - - #define IRQT_NOEDGE (0) - #define IRQT_RISING (__IRQT_RISEDGE) - #define IRQT_FALLING (__IRQT_FALEDGE) - #define IRQT_BOTHEDGE (__IRQT_RISEDGE|__IRQT_FALEDGE) - #define IRQT_LOW (__IRQT_LOWLVL) - #define IRQT_HIGH (__IRQT_HIGHLVL) + function. Type should be one of IRQ_TYPE_xxx defined in + 3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type. @@ -164,7 +158,7 @@ So, what's changed? be re-checked for pending events. (see the Neponset IRQ handler for details). -7. fixup_irq() is gone, as is include/asm-arm/arch-*/irq.h +7. fixup_irq() is gone, as is arch/arm/mach-*/include/mach/irq.h Please note that this will not solve all problems - some of them are hardware based. Mixing level-based and edge-based IRQs on the same diff --git a/Documentation/arm/README b/Documentation/arm/README index 9b9c8226fdc428665fb2e792ce142b77abf2d80d..d98783fbe0c7c8b6ff95a6e61931fc56d4ef7a3b 100644 --- a/Documentation/arm/README +++ b/Documentation/arm/README @@ -79,7 +79,7 @@ Machine/Platform support To this end, we now have arch/arm/mach-$(MACHINE) directories which are designed to house the non-driver files for a particular machine (eg, PCI, memory management, architecture definitions etc). For all future - machines, there should be a corresponding include/asm-arm/arch-$(MACHINE) + machines, there should be a corresponding arch/arm/mach-$(MACHINE)/include/mach directory. @@ -176,7 +176,7 @@ Kernel entry (head.S) class typically based around one or more system on a chip devices, and acts as a natural container around the actual implementations. These classes are given directories - arch/arm/mach- and - include/asm-arm/arch- - which contain the source files to + arch/arm/mach- - which contain the source files to/include/mach support the machine class. This directories also contain any machine specific supporting code. diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt index 8caea8c237eec0b9a033414c53ab2ea30b313800..b5d20c0b2ab46d60472797dad8dcf197971d9199 100644 --- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt +++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt @@ -16,13 +16,13 @@ Introduction Headers ------- - See include/asm-arm/arch-s3c2410/regs-gpio.h for the list + See arch/arm/mach-s3c2410/include/mach/regs-gpio.h for the list of GPIO pins, and the configuration values for them. This - is included by using #include + is included by using #include The GPIO management functions are defined in the hardware - header include/asm-arm/arch-s3c2410/hardware.h which can be - included by #include + header arch/arm/mach-s3c2410/include/mach/hardware.h which can be + included by #include A useful amount of documentation can be found in the hardware header on how the GPIO functions (and others) work. diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index d04e1e30c47f8ff1a8613a369506e58cf5a41a21..014a8ec4877d296be7864abd82e663fb93e8c8f0 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -36,7 +36,7 @@ Layout in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440 Register, kernel and platform data definitions are held in the - include/asm-arm/arch-s3c2410 directory. + arch/arm/mach-s3c2410 directory./include/mach Machines diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt index b93b68e2b143ec72bed475f6a4203dc3fc485c70..67671eba423125179a6ab7f0e831225dab43bbbb 100644 --- a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt +++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt @@ -49,7 +49,7 @@ Board Support Platform Data ------------- - See linux/include/asm-arm/arch-s3c2410/usb-control.h for the + See arch/arm/mach-s3c2410/include/mach/usb-control.h for the descriptions of the platform device data. An implementation can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c . diff --git a/Documentation/auxdisplay/Makefile b/Documentation/auxdisplay/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..51fe23332c81fc644f091099e363d01d5f367a36 --- /dev/null +++ b/Documentation/auxdisplay/Makefile @@ -0,0 +1,10 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := cfag12864b-example + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_cfag12864b-example.o += -I$(objtree)/usr/include diff --git a/Documentation/bt8xxgpio.txt b/Documentation/bt8xxgpio.txt new file mode 100644 index 0000000000000000000000000000000000000000..d8297e4ebd265eb5dd273bad20162e51d369b25a --- /dev/null +++ b/Documentation/bt8xxgpio.txt @@ -0,0 +1,67 @@ +=============================================================== +== BT8XXGPIO driver == +== == +== A driver for a selfmade cheap BT8xx based PCI GPIO-card == +== == +== For advanced documentation, see == +== http://www.bu3sch.de/btgpio.php == +=============================================================== + + +A generic digital 24-port PCI GPIO card can be built out of an ordinary +Brooktree bt848, bt849, bt878 or bt879 based analog TV tuner card. The +Brooktree chip is used in old analog Hauppauge WinTV PCI cards. You can easily +find them used for low prices on the net. + +The bt8xx chip does have 24 digital GPIO ports. +These ports are accessible via 24 pins on the SMD chip package. + + +============================================== +== How to physically access the GPIO pins == +============================================== + +The are several ways to access these pins. One might unsolder the whole chip +and put it on a custom PCI board, or one might only unsolder each individual +GPIO pin and solder that to some tiny wire. As the chip package really is tiny +there are some advanced soldering skills needed in any case. + +The physical pinouts are drawn in the following ASCII art. +The GPIO pins are marked with G00-G23 + + G G G G G G G G G G G G G G G G G G + 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 + 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 + | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | + --------------------------------------------------------------------------- + --| ^ ^ |-- + --| pin 86 pin 67 |-- + --| |-- + --| pin 61 > |-- G18 + --| |-- G19 + --| |-- G20 + --| |-- G21 + --| |-- G22 + --| pin 56 > |-- G23 + --| |-- + --| Brooktree 878/879 |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| O |-- + --| |-- + --------------------------------------------------------------------------- + | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | + ^ + This is pin 1 + diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt index 63e59b8847c5475fe46f3012f6365a4f292ba9fc..8244c6442faa4d24ce9980c586be316629d54633 100644 --- a/Documentation/cciss.txt +++ b/Documentation/cciss.txt @@ -112,27 +112,18 @@ Hot plug support for SCSI tape drives Hot plugging of SCSI tape drives is supported, with some caveats. The cciss driver must be informed that changes to the SCSI bus -have been made, in addition to and prior to informing the SCSI -mid layer. This may be done via the /proc filesystem. For example: +have been made. This may be done via the /proc filesystem. +For example: echo "rescan" > /proc/scsi/cciss0/1 -This causes the adapter to query the adapter about changes to the -physical SCSI buses and/or fibre channel arbitrated loop and the +This causes the driver to query the adapter about changes to the +physical SCSI buses and/or fibre channel arbitrated loop and the driver to make note of any new or removed sequential access devices or medium changers. The driver will output messages indicating what devices have been added or removed and the controller, bus, target and -lun used to address the device. Once this is done, the SCSI mid layer -can be informed of changes to the virtual SCSI bus which the driver -presents to it in the usual way. For example: - - echo scsi add-single-device 3 2 1 0 > /proc/scsi/scsi - -to add a device on controller 3, bus 2, target 1, lun 0. Note that -the driver makes an effort to preserve the devices positions -in the virtual SCSI bus, so if you are only moving tape drives -around on the same adapter and not adding or removing tape drives -from the adapter, informing the SCSI mid layer may not be necessary. +lun used to address the device. It then notifies the SCSI mid layer +of these changes. Note that the naming convention of the /proc filesystem entries contains a number in addition to the driver name. (E.g. "cciss0" diff --git a/Documentation/cli-sti-removal.txt b/Documentation/cli-sti-removal.txt deleted file mode 100644 index 60932b02fcb333a8c4bd60e4ac0e8296f33c8784..0000000000000000000000000000000000000000 --- a/Documentation/cli-sti-removal.txt +++ /dev/null @@ -1,133 +0,0 @@ - -#### cli()/sti() removal guide, started by Ingo Molnar - - -as of 2.5.28, five popular macros have been removed on SMP, and -are being phased out on UP: - - cli(), sti(), save_flags(flags), save_flags_cli(flags), restore_flags(flags) - -until now it was possible to protect driver code against interrupt -handlers via a cli(), but from now on other, more lightweight methods -have to be used for synchronization, such as spinlocks or semaphores. - -for example, driver code that used to do something like: - - struct driver_data; - - irq_handler (...) - { - .... - driver_data.finish = 1; - driver_data.new_work = 0; - .... - } - - ... - - ioctl_func (...) - { - ... - cli(); - ... - driver_data.finish = 0; - driver_data.new_work = 2; - ... - sti(); - ... - } - -was SMP-correct because the cli() function ensured that no -interrupt handler (amongst them the above irq_handler()) function -would execute while the cli()-ed section is executing. - -but from now on a more direct method of locking has to be used: - - DEFINE_SPINLOCK(driver_lock); - struct driver_data; - - irq_handler (...) - { - unsigned long flags; - .... - spin_lock_irqsave(&driver_lock, flags); - .... - driver_data.finish = 1; - driver_data.new_work = 0; - .... - spin_unlock_irqrestore(&driver_lock, flags); - .... - } - - ... - - ioctl_func (...) - { - ... - spin_lock_irq(&driver_lock); - ... - driver_data.finish = 0; - driver_data.new_work = 2; - ... - spin_unlock_irq(&driver_lock); - ... - } - -the above code has a number of advantages: - -- the locking relation is easier to understand - actual lock usage - pinpoints the critical sections. cli() usage is too opaque. - Easier to understand means it's easier to debug. - -- it's faster, because spinlocks are faster to acquire than the - potentially heavily-used IRQ lock. Furthermore, your driver does - not have to wait eg. for a big heavy SCSI interrupt to finish, - because the driver_lock spinlock is only used by your driver. - cli() on the other hand was used by many drivers, and extended - the critical section to the whole IRQ handler function - creating - serious lock contention. - - -to make the transition easier, we've still kept the cli(), sti(), -save_flags(), save_flags_cli() and restore_flags() macros defined -on UP systems - but their usage will be phased out until 2.6 is -released. - -drivers that want to disable local interrupts (interrupts on the -current CPU), can use the following five macros: - - local_irq_disable(), local_irq_enable(), local_save_flags(flags), - local_irq_save(flags), local_irq_restore(flags) - -but beware, their meaning and semantics are much simpler, far from -that of the old cli(), sti(), save_flags(flags) and restore_flags(flags) -SMP meaning: - - local_irq_disable() => turn local IRQs off - - local_irq_enable() => turn local IRQs on - - local_save_flags(flags) => save the current IRQ state into flags. The - state can be on or off. (on some - architectures there's even more bits in it.) - - local_irq_save(flags) => save the current IRQ state into flags and - disable interrupts. - - local_irq_restore(flags) => restore the IRQ state from flags. - -(local_irq_save can save both irqs on and irqs off state, and -local_irq_restore can restore into both irqs on and irqs off state.) - -another related change is that synchronize_irq() now takes a parameter: -synchronize_irq(irq). This change too has the purpose of making SMP -synchronization more lightweight - this way you can wait for your own -interrupt handler to finish, no need to wait for other IRQ sources. - - -why were these changes done? The main reason was the architectural burden -of maintaining the cli()/sti() interface - it became a real problem. The -new interrupt system is much more streamlined, easier to understand, debug, -and it's also a bit faster - the same happened to it that will happen to -cli()/sti() using drivers once they convert to spinlocks :-) - diff --git a/Documentation/connector/Makefile b/Documentation/connector/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..8df1a7285a06bab82de03628a686a55339675334 --- /dev/null +++ b/Documentation/connector/Makefile @@ -0,0 +1,11 @@ +ifneq ($(CONFIG_CONNECTOR),) +obj-m += cn_test.o +endif + +# List of programs to build +hostprogs-y := ucon + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include diff --git a/Documentation/controllers/memory.txt b/Documentation/controllers/memory.txt index 866b9cd9a9590d6b6b8c3d577038e8d51234082b..9b53d5827361fd647f3388212e648f502defc698 100644 --- a/Documentation/controllers/memory.txt +++ b/Documentation/controllers/memory.txt @@ -242,8 +242,7 @@ rmdir() if there are no tasks. 1. Add support for accounting huge pages (as a separate controller) 2. Make per-cgroup scanner reclaim not-shared pages first 3. Teach controller to account for shared-pages -4. Start reclamation when the limit is lowered -5. Start reclamation in the background when the limit is +4. Start reclamation in the background when the limit is not yet hit but the usage is getting closer Summary diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt index dcec0564d04075a9751e462968f956385405f283..5b0cfa67aff9c89ebc6d0f9dd4d467e8be8ae71f 100644 --- a/Documentation/cpu-freq/governors.txt +++ b/Documentation/cpu-freq/governors.txt @@ -122,7 +122,7 @@ around '10000' or more. show_sampling_rate_(min|max): the minimum and maximum sampling rates available that you may set 'sampling_rate' to. -up_threshold: defines what the average CPU usaged between the samplings +up_threshold: defines what the average CPU usage between the samplings of 'sampling_rate' needs to be for the kernel to make a decision on whether it should increase the frequency. For example when it is set to its default value of '80' it means that between the checking diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index ba0aacde94fba2472d33ba9da5764a2b8cc5f63e..94bbc27ddd4fbf50ff361177450c5f524210f1cb 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -59,15 +59,10 @@ apicid values in those tables for disabled apics. In the event BIOS doesn't mark such hot-pluggable cpus as disabled entries, one could use this parameter "additional_cpus=x" to represent those cpus in the cpu_possible_map. -s390 uses the number of cpus it detects at IPL time to also the number of bits -in cpu_possible_map. If it is desired to add additional cpus at a later time -the number should be specified using this option or the possible_cpus option. - possible_cpus=n [s390 only] use this to set hotpluggable cpus. This option sets possible_cpus bits in cpu_possible_map. Thus keeping the numbers of bits set constant even if the machine gets rebooted. - This option overrides additional_cpus. CPU maps and such ----------------- diff --git a/Documentation/devices.txt b/Documentation/devices.txt index e6244cde26e9406527dfcaa9aae9edf9e17c6161..05c80645e4ee172fafa118eea8f8b56aec242209 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -2560,9 +2560,6 @@ Your cooperation is appreciated. 96 = /dev/usb/hiddev0 1st USB HID device ... 111 = /dev/usb/hiddev15 16th USB HID device - 112 = /dev/usb/auer0 1st auerswald ISDN device - ... - 127 = /dev/usb/auer15 16th auerswald ISDN device 128 = /dev/usb/brlvgr0 First Braille Voyager device ... 131 = /dev/usb/brlvgr3 Fourth Braille Voyager device diff --git a/Documentation/edac.txt b/Documentation/edac.txt index a5c36842ecef4ec103ff7f44b5499ed9963db0c2..8eda3fb664166726163bf59565c9d52c76af6c79 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -222,74 +222,9 @@ both csrow2 and csrow3 are populated, this indicates a dual ranked set of DIMMs for channels 0 and 1. -Within each of the 'mc','mcX' and 'csrowX' directories are several +Within each of the 'mcX' and 'csrowX' directories are several EDAC control and attribute files. - -============================================================================ -DIRECTORY 'mc' - -In directory 'mc' are EDAC system overall control and attribute files: - - -Panic on UE control file: - - 'edac_mc_panic_on_ue' - - An uncorrectable error will cause a machine panic. This is usually - desirable. It is a bad idea to continue when an uncorrectable error - occurs - it is indeterminate what was uncorrected and the operating - system context might be so mangled that continuing will lead to further - corruption. If the kernel has MCE configured, then EDAC will never - notice the UE. - - LOAD TIME: module/kernel parameter: panic_on_ue=[0|1] - - RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_panic_on_ue - - -Log UE control file: - - 'edac_mc_log_ue' - - Generate kernel messages describing uncorrectable errors. These errors - are reported through the system message log system. UE statistics - will be accumulated even when UE logging is disabled. - - LOAD TIME: module/kernel parameter: log_ue=[0|1] - - RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ue - - -Log CE control file: - - 'edac_mc_log_ce' - - Generate kernel messages describing correctable errors. These - errors are reported through the system message log system. - CE statistics will be accumulated even when CE logging is disabled. - - LOAD TIME: module/kernel parameter: log_ce=[0|1] - - RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ce - - -Polling period control file: - - 'edac_mc_poll_msec' - - The time period, in milliseconds, for polling for error information. - Too small a value wastes resources. Too large a value might delay - necessary handling of errors and might loose valuable information for - locating the error. 1000 milliseconds (once each second) is the current - default. Systems which require all the bandwidth they can get, may - increase this. - - LOAD TIME: module/kernel parameter: poll_msec=[0|1] - - RUN TIME: echo "1000" >/sys/devices/system/edac/mc/edac_mc_poll_msec - - ============================================================================ 'mcX' DIRECTORIES @@ -392,7 +327,7 @@ Sdram memory scrubbing rate: 'sdram_scrub_rate' Read/Write attribute file that controls memory scrubbing. The scrubbing - rate is set by writing a minimum bandwith in bytes/sec to the attribute + rate is set by writing a minimum bandwidth in bytes/sec to the attribute file. The rate will be translated to an internal value that gives at least the specified rate. @@ -537,7 +472,6 @@ Channel 1 DIMM Label control file: motherboard specific and determination of this information must occur in userland at this time. - ============================================================================ SYSTEM LOGGING @@ -570,7 +504,6 @@ error type, a notice of "no info" and then an optional, driver-specific error message. - ============================================================================ PCI Bus Parity Detection @@ -604,6 +537,74 @@ Enable/Disable PCI Parity checking control file: echo "0" >/sys/devices/system/edac/pci/check_pci_parity +Parity Count: + + 'pci_parity_count' + + This attribute file will display the number of parity errors that + have been detected. + + +============================================================================ +MODULE PARAMETERS + +Panic on UE control file: + + 'edac_mc_panic_on_ue' + + An uncorrectable error will cause a machine panic. This is usually + desirable. It is a bad idea to continue when an uncorrectable error + occurs - it is indeterminate what was uncorrected and the operating + system context might be so mangled that continuing will lead to further + corruption. If the kernel has MCE configured, then EDAC will never + notice the UE. + + LOAD TIME: module/kernel parameter: edac_mc_panic_on_ue=[0|1] + + RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_panic_on_ue + + +Log UE control file: + + 'edac_mc_log_ue' + + Generate kernel messages describing uncorrectable errors. These errors + are reported through the system message log system. UE statistics + will be accumulated even when UE logging is disabled. + + LOAD TIME: module/kernel parameter: edac_mc_log_ue=[0|1] + + RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ue + + +Log CE control file: + + 'edac_mc_log_ce' + + Generate kernel messages describing correctable errors. These + errors are reported through the system message log system. + CE statistics will be accumulated even when CE logging is disabled. + + LOAD TIME: module/kernel parameter: edac_mc_log_ce=[0|1] + + RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ce + + +Polling period control file: + + 'edac_mc_poll_msec' + + The time period, in milliseconds, for polling for error information. + Too small a value wastes resources. Too large a value might delay + necessary handling of errors and might loose valuable information for + locating the error. 1000 milliseconds (once each second) is the current + default. Systems which require all the bandwidth they can get, may + increase this. + + LOAD TIME: module/kernel parameter: edac_mc_poll_msec=[0|1] + + RUN TIME: echo "1000" > /sys/module/edac_core/parameters/edac_mc_poll_msec + Panic on PCI PARITY Error: @@ -614,21 +615,13 @@ Panic on PCI PARITY Error: error has been detected. - module/kernel parameter: panic_on_pci_parity=[0|1] + module/kernel parameter: edac_panic_on_pci_pe=[0|1] Enable: - echo "1" >/sys/devices/system/edac/pci/panic_on_pci_parity + echo "1" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe Disable: - echo "0" >/sys/devices/system/edac/pci/panic_on_pci_parity - - -Parity Count: - - 'pci_parity_count' - - This attribute file will display the number of parity errors that - have been detected. + echo "0" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt new file mode 100644 index 0000000000000000000000000000000000000000..c87bfe5c630a16893aed884a86f6e39506d94182 --- /dev/null +++ b/Documentation/fb/sh7760fb.txt @@ -0,0 +1,131 @@ +SH7760/SH7763 integrated LCDC Framebuffer driver +================================================ + +0. Overwiew +----------- +The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which +supports (in theory) resolutions ranging from 1x1 to 1024x1024, +with color depths ranging from 1 to 16 bits, on STN, DSTN and TFT Panels. + +Caveats: +* Framebuffer memory must be a large chunk allocated at the top + of Area3 (HW requirement). Because of this requirement you should NOT + make the driver a module since at runtime it may become impossible to + get a large enough contiguous chunk of memory. + +* The driver does not support changing resolution while loaded + (displays aren't hotpluggable anyway) + +* Heavy flickering may be observed + a) if you're using 15/16bit color modes at >= 640x480 px resolutions, + b) during PCMCIA (or any other slow bus) activity. + +* Rotation works only 90degress clockwise, and only if horizontal + resolution is <= 320 pixels. + +files: drivers/video/sh7760fb.c + include/asm-sh/sh7760fb.h + Documentation/fb/sh7760fb.txt + +1. Platform setup +----------------- +SH7760: + Video data is fetched via the DMABRG DMA engine, so you have to + configure the SH DMAC for DMABRG mode (write 0x94808080 to the + DMARSRA register somewhere at boot). + + PFC registers PCCR and PCDR must be set to peripheral mode. + (write zeros to both). + +The driver does NOT do the above for you since board setup is, well, job +of the board setup code. + +2. Panel definitions +-------------------- +The LCDC must explicitly be told about the type of LCD panel +attached. Data must be wrapped in a "struct sh7760fb_platdata" and +passed to the driver as platform_data. + +Suggest you take a closer look at the SH7760 Manual, Section 30. +(http://documentation.renesas.com/eng/products/mpumcu/e602291_sh7760.pdf) + +The following code illustrates what needs to be done to +get the framebuffer working on a 640x480 TFT: + +====================== cut here ====================================== + +#include +#include + +/* + * NEC NL6440bc26-01 640x480 TFT + * dotclock 25175 kHz + * Xres 640 Yres 480 + * Htotal 800 Vtotal 525 + * HsynStart 656 VsynStart 490 + * HsynLenn 30 VsynLenn 2 + * + * The linux framebuffer layer does not use the syncstart/synclen + * values but right/left/upper/lower margin values. The comments + * for the x_margin explain how to calculate those from given + * panel sync timings. + */ +static struct fb_videomode nl6448bc26 = { + .name = "NL6448BC26", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39683, /* in picoseconds! */ + .hsync_len = 30, + .vsync_len = 2, + .left_margin = 114, /* HTOT - (HSYNSLEN + HSYNSTART) */ + .right_margin = 16, /* HSYNSTART - XRES */ + .upper_margin = 33, /* VTOT - (VSYNLEN + VSYNSTART) */ + .lower_margin = 10, /* VSYNSTART - YRES */ + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct sh7760fb_platdata sh7760fb_nl6448 = { + .def_mode = &nl6448bc26, + .ldmtr = LDMTR_TFT_COLOR_16, /* 16bit TFT panel */ + .lddfr = LDDFR_8BPP, /* we want 8bit output */ + .ldpmmr = 0x0070, + .ldpspr = 0x0500, + .ldaclnr = 0, + .ldickr = LDICKR_CLKSRC(LCDC_CLKSRC_EXTERNAL) | + LDICKR_CLKDIV(1), + .rotate = 0, + .novsync = 1, + .blank = NULL, +}; + +/* SH7760: + * 0xFE300800: 256 * 4byte xRGB palette ram + * 0xFE300C00: 42 bytes ctrl registers + */ +static struct resource sh7760_lcdc_res[] = { + [0] = { + .start = 0xFE300800, + .end = 0xFE300CFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh7760_lcdc_dev = { + .dev = { + .platform_data = &sh7760fb_nl6448, + }, + .name = "sh7760-lcdc", + .id = -1, + .resource = sh7760_lcdc_res, + .num_resources = ARRAY_SIZE(sh7760_lcdc_res), +}; + +====================== cut here ====================================== diff --git a/Documentation/fb/tridentfb.txt b/Documentation/fb/tridentfb.txt index 8a6c8a43e6a37803e4fcbd640f1b4578f5a611c6..45d9de5b13a3cb9f8143484d49737ae87254fdf7 100644 --- a/Documentation/fb/tridentfb.txt +++ b/Documentation/fb/tridentfb.txt @@ -3,11 +3,25 @@ Tridentfb is a framebuffer driver for some Trident chip based cards. The following list of chips is thought to be supported although not all are tested: -those from the Image series with Cyber in their names - accelerated -those with Blade in their names (Blade3D,CyberBlade...) - accelerated -the newer CyberBladeXP family - nonaccelerated - -Only PCI/AGP based cards are supported, none of the older Tridents. +those from the TGUI series 9440/96XX and with Cyber in their names +those from the Image series and with Cyber in their names +those with Blade in their names (Blade3D,CyberBlade...) +the newer CyberBladeXP family + +All families are accelerated. Only PCI/AGP based cards are supported, +none of the older Tridents. +The driver supports 8, 16 and 32 bits per pixel depths. +The TGUI family requires a line length to be power of 2 if acceleration +is enabled. This means that range of possible resolutions and bpp is +limited comparing to the range if acceleration is disabled (see list +of parameters below). + +Known bugs: +1. The driver randomly locks up on 3DImage975 chip with acceleration + enabled. The same happens in X11 (Xorg). +2. The ramdac speeds require some more fine tuning. It is possible to + switch resolution which the chip does not support at some depths for + older chips. How to use it? ============== @@ -17,12 +31,11 @@ video=tridentfb The parameters for tridentfb are concatenated with a ':' as in this example. -video=tridentfb:800x600,bpp=16,noaccel +video=tridentfb:800x600-16@75,noaccel The second level parameters that tridentfb understands are: noaccel - turns off acceleration (when it doesn't work for your card) -accel - force text acceleration (for boards which by default are noacceled) fp - use flat panel related stuff crt - assume monitor is present instead of fp @@ -31,21 +44,24 @@ center - for flat panels and resolutions smaller than native size center the image, otherwise use stretch -memsize - integer value in Kb, use if your card's memory size is misdetected. +memsize - integer value in KB, use if your card's memory size is misdetected. look at the driver output to see what it says when initializing. -memdiff - integer value in Kb,should be nonzero if your card reports - more memory than it actually has.For instance mine is 192K less than + +memdiff - integer value in KB, should be nonzero if your card reports + more memory than it actually has. For instance mine is 192K less than detection says in all three BIOS selectable situations 2M, 4M, 8M. Only use if your video memory is taken from main memory hence of - configurable size.Otherwise use memsize. - If in some modes which barely fit the memory you see garbage at the bottom - this might help by not letting change to that mode anymore. + configurable size. Otherwise use memsize. + If in some modes which barely fit the memory you see garbage + at the bottom this might help by not letting change to that mode + anymore. nativex - the width in pixels of the flat panel.If you know it (usually 1024 800 or 1280) and it is not what the driver seems to detect use it. -bpp - bits per pixel (8,16 or 32) -mode - a mode name like 800x600 (as described in Documentation/fb/modedb.txt) +bpp - bits per pixel (8,16 or 32) +mode - a mode name like 800x600-8@75 as described in + Documentation/fb/modedb.txt Using insane values for the above parameters will probably result in driver misbehaviour so take care(for instance memsize=12345678 or memdiff=23784 or diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 9f73587219e87a601f361b0942530888e56c3303..eb1a47b974278270242c2da772420f6a984ff706 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -19,15 +19,6 @@ Who: Pavel Machek --------------------------- -What: old NCR53C9x driver -When: October 2007 -Why: Replaced by the much better esp_scsi driver. Actual low-level - driver can be ported over almost trivially. -Who: David Miller - Christoph Hellwig - ---------------------------- - What: Video4Linux API 1 ioctls and video_decoder.h from Video devices. When: December 2008 Files: include/linux/video_decoder.h include/linux/videodev.h @@ -47,6 +38,30 @@ Who: Mauro Carvalho Chehab --------------------------- +What: old tuner-3036 i2c driver +When: 2.6.28 +Why: This driver is for VERY old i2c-over-parallel port teletext receiver + boxes. Rather then spending effort on converting this driver to V4L2, + and since it is extremely unlikely that anyone still uses one of these + devices, it was decided to drop it. +Who: Hans Verkuil + Mauro Carvalho Chehab + + --------------------------- + +What: V4L2 dpc7146 driver +When: 2.6.28 +Why: Old driver for the dpc7146 demonstration board that is no longer + relevant. The last time this was tested on actual hardware was + probably around 2002. Since this is a driver for a demonstration + board the decision was made to remove it rather than spending a + lot of effort continually updating this driver to stay in sync + with the latest internal V4L2 or I2C API. +Who: Hans Verkuil + Mauro Carvalho Chehab + +--------------------------- + What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl]) When: November 2005 Files: drivers/pcmcia/: pcmcia_ioctl.c @@ -138,24 +153,6 @@ Who: Kay Sievers --------------------------- -What: find_task_by_pid -When: 2.6.26 -Why: With pid namespaces, calling this funciton will return the - wrong task when called from inside a namespace. - - The best way to save a task pid and find a task by this - pid later, is to find this task's struct pid pointer (or get - it directly from the task) and call pid_task() later. - - If someone really needs to get a task by its pid_t, then - he most likely needs the find_task_by_vpid() to get the - task from the same namespace as the current task is in, but - this may be not so in general. - -Who: Pavel Emelyanov - ---------------------------- - What: ACPI procfs interface When: July 2008 Why: ACPI sysfs conversion should be finished by January 2008. @@ -199,19 +196,6 @@ Who: Tejun Heo --------------------------- -What: The arch/ppc and include/asm-ppc directories -When: Jun 2008 -Why: The arch/powerpc tree is the merged architecture for ppc32 and ppc64 - platforms. Currently there are efforts underway to port the remaining - arch/ppc platforms to the merged tree. New submissions to the arch/ppc - tree have been frozen with the 2.6.22 kernel release and that tree will - remain in bug-fix only mode until its scheduled removal. Platforms - that are not ported by June 2008 will be removed due to the lack of an - interested maintainer. -Who: linuxppc-dev@ozlabs.org - ---------------------------- - What: i386/x86_64 bzImage symlinks When: April 2010 @@ -300,14 +284,6 @@ Who: ocfs2-devel@oss.oracle.com --------------------------- -What: asm/semaphore.h -When: 2.6.26 -Why: Implementation became generic; users should now include - linux/semaphore.h instead. -Who: Matthew Wilcox - ---------------------------- - What: SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD, SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD When: June 2009 diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 8b22d7d8b99166b6db2e037644e9c5d7ff03695e..680fb566b9286bcc71a527c5f75d4b94fc9ac215 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -510,6 +510,7 @@ prototypes: void (*close)(struct vm_area_struct*); int (*fault)(struct vm_area_struct*, struct vm_fault *); int (*page_mkwrite)(struct vm_area_struct *, struct page *); + int (*access)(struct vm_area_struct *, unsigned long, void*, int, int); locking rules: BKL mmap_sem PageLocked(page) @@ -517,6 +518,7 @@ open: no yes close: no yes fault: no yes page_mkwrite: no yes no +access: no yes ->page_mkwrite() is called when a previously read-only page is about to become writeable. The file system is responsible for @@ -525,6 +527,11 @@ taking to lock out truncate, the page range should be verified to be within i_size. The page mapping should also be checked that it is not NULL. + ->access() is called when get_user_pages() fails in +acces_process_vm(), typically used to debug a process through +/proc/pid/mem or ptrace. This function is needed only for +VM_IO | VM_PFNMAP VMAs. + ================================================================================ Dubious stuff diff --git a/Documentation/filesystems/configfs/Makefile b/Documentation/filesystems/configfs/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..be7ec5e67dbcb17b0730da4ea47890eb7b6b583f --- /dev/null +++ b/Documentation/filesystems/configfs/Makefile @@ -0,0 +1,3 @@ +ifneq ($(CONFIG_CONFIGFS_FS),) +obj-m += configfs_example_explicit.o configfs_example_macros.o +endif diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt index 44c97e6accb2655faed63b52e4bc63848571a7ab..fabcb0e00f25d4288c31382699c844d5f3820939 100644 --- a/Documentation/filesystems/configfs/configfs.txt +++ b/Documentation/filesystems/configfs/configfs.txt @@ -311,9 +311,20 @@ the subsystem must be ready for it. [An Example] The best example of these basic concepts is the simple_children -subsystem/group and the simple_child item in configfs_example.c It -shows a trivial object displaying and storing an attribute, and a simple -group creating and destroying these children. +subsystem/group and the simple_child item in configfs_example_explicit.c +and configfs_example_macros.c. It shows a trivial object displaying and +storing an attribute, and a simple group creating and destroying these +children. + +The only difference between configfs_example_explicit.c and +configfs_example_macros.c is how the attributes of the childless item +are defined. The childless item has extended attributes, each with +their own show()/store() operation. This follows a convention commonly +used in sysfs. configfs_example_explicit.c creates these attributes +by explicitly defining the structures involved. Conversely +configfs_example_macros.c uses some convenience macros from configfs.h +to define the attributes. These macros are similar to their sysfs +counterparts. [Hierarchy Navigation and the Subsystem Mutex] diff --git a/Documentation/filesystems/configfs/configfs_example.c b/Documentation/filesystems/configfs/configfs_example.c deleted file mode 100644 index 039648791701f6e1b74a970d36f361cab695ab64..0000000000000000000000000000000000000000 --- a/Documentation/filesystems/configfs/configfs_example.c +++ /dev/null @@ -1,485 +0,0 @@ -/* - * vim: noexpandtab ts=8 sts=0 sw=8: - * - * configfs_example.c - This file is a demonstration module containing - * a number of configfs subsystems. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public - * License as published by the Free Software Foundation; either - * version 2 of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the - * Free Software Foundation, Inc., 59 Temple Place - Suite 330, - * Boston, MA 021110-1307, USA. - * - * Based on sysfs: - * sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel - * - * configfs Copyright (C) 2005 Oracle. All rights reserved. - */ - -#include -#include -#include - -#include - - - -/* - * 01-childless - * - * This first example is a childless subsystem. It cannot create - * any config_items. It just has attributes. - * - * Note that we are enclosing the configfs_subsystem inside a container. - * This is not necessary if a subsystem has no attributes directly - * on the subsystem. See the next example, 02-simple-children, for - * such a subsystem. - */ - -struct childless { - struct configfs_subsystem subsys; - int showme; - int storeme; -}; - -struct childless_attribute { - struct configfs_attribute attr; - ssize_t (*show)(struct childless *, char *); - ssize_t (*store)(struct childless *, const char *, size_t); -}; - -static inline struct childless *to_childless(struct config_item *item) -{ - return item ? container_of(to_configfs_subsystem(to_config_group(item)), struct childless, subsys) : NULL; -} - -static ssize_t childless_showme_read(struct childless *childless, - char *page) -{ - ssize_t pos; - - pos = sprintf(page, "%d\n", childless->showme); - childless->showme++; - - return pos; -} - -static ssize_t childless_storeme_read(struct childless *childless, - char *page) -{ - return sprintf(page, "%d\n", childless->storeme); -} - -static ssize_t childless_storeme_write(struct childless *childless, - const char *page, - size_t count) -{ - unsigned long tmp; - char *p = (char *) page; - - tmp = simple_strtoul(p, &p, 10); - if (!p || (*p && (*p != '\n'))) - return -EINVAL; - - if (tmp > INT_MAX) - return -ERANGE; - - childless->storeme = tmp; - - return count; -} - -static ssize_t childless_description_read(struct childless *childless, - char *page) -{ - return sprintf(page, -"[01-childless]\n" -"\n" -"The childless subsystem is the simplest possible subsystem in\n" -"configfs. It does not support the creation of child config_items.\n" -"It only has a few attributes. In fact, it isn't much different\n" -"than a directory in /proc.\n"); -} - -static struct childless_attribute childless_attr_showme = { - .attr = { .ca_owner = THIS_MODULE, .ca_name = "showme", .ca_mode = S_IRUGO }, - .show = childless_showme_read, -}; -static struct childless_attribute childless_attr_storeme = { - .attr = { .ca_owner = THIS_MODULE, .ca_name = "storeme", .ca_mode = S_IRUGO | S_IWUSR }, - .show = childless_storeme_read, - .store = childless_storeme_write, -}; -static struct childless_attribute childless_attr_description = { - .attr = { .ca_owner = THIS_MODULE, .ca_name = "description", .ca_mode = S_IRUGO }, - .show = childless_description_read, -}; - -static struct configfs_attribute *childless_attrs[] = { - &childless_attr_showme.attr, - &childless_attr_storeme.attr, - &childless_attr_description.attr, - NULL, -}; - -static ssize_t childless_attr_show(struct config_item *item, - struct configfs_attribute *attr, - char *page) -{ - struct childless *childless = to_childless(item); - struct childless_attribute *childless_attr = - container_of(attr, struct childless_attribute, attr); - ssize_t ret = 0; - - if (childless_attr->show) - ret = childless_attr->show(childless, page); - return ret; -} - -static ssize_t childless_attr_store(struct config_item *item, - struct configfs_attribute *attr, - const char *page, size_t count) -{ - struct childless *childless = to_childless(item); - struct childless_attribute *childless_attr = - container_of(attr, struct childless_attribute, attr); - ssize_t ret = -EINVAL; - - if (childless_attr->store) - ret = childless_attr->store(childless, page, count); - return ret; -} - -static struct configfs_item_operations childless_item_ops = { - .show_attribute = childless_attr_show, - .store_attribute = childless_attr_store, -}; - -static struct config_item_type childless_type = { - .ct_item_ops = &childless_item_ops, - .ct_attrs = childless_attrs, - .ct_owner = THIS_MODULE, -}; - -static struct childless childless_subsys = { - .subsys = { - .su_group = { - .cg_item = { - .ci_namebuf = "01-childless", - .ci_type = &childless_type, - }, - }, - }, -}; - - -/* ----------------------------------------------------------------- */ - -/* - * 02-simple-children - * - * This example merely has a simple one-attribute child. Note that - * there is no extra attribute structure, as the child's attribute is - * known from the get-go. Also, there is no container for the - * subsystem, as it has no attributes of its own. - */ - -struct simple_child { - struct config_item item; - int storeme; -}; - -static inline struct simple_child *to_simple_child(struct config_item *item) -{ - return item ? container_of(item, struct simple_child, item) : NULL; -} - -static struct configfs_attribute simple_child_attr_storeme = { - .ca_owner = THIS_MODULE, - .ca_name = "storeme", - .ca_mode = S_IRUGO | S_IWUSR, -}; - -static struct configfs_attribute *simple_child_attrs[] = { - &simple_child_attr_storeme, - NULL, -}; - -static ssize_t simple_child_attr_show(struct config_item *item, - struct configfs_attribute *attr, - char *page) -{ - ssize_t count; - struct simple_child *simple_child = to_simple_child(item); - - count = sprintf(page, "%d\n", simple_child->storeme); - - return count; -} - -static ssize_t simple_child_attr_store(struct config_item *item, - struct configfs_attribute *attr, - const char *page, size_t count) -{ - struct simple_child *simple_child = to_simple_child(item); - unsigned long tmp; - char *p = (char *) page; - - tmp = simple_strtoul(p, &p, 10); - if (!p || (*p && (*p != '\n'))) - return -EINVAL; - - if (tmp > INT_MAX) - return -ERANGE; - - simple_child->storeme = tmp; - - return count; -} - -static void simple_child_release(struct config_item *item) -{ - kfree(to_simple_child(item)); -} - -static struct configfs_item_operations simple_child_item_ops = { - .release = simple_child_release, - .show_attribute = simple_child_attr_show, - .store_attribute = simple_child_attr_store, -}; - -static struct config_item_type simple_child_type = { - .ct_item_ops = &simple_child_item_ops, - .ct_attrs = simple_child_attrs, - .ct_owner = THIS_MODULE, -}; - - -struct simple_children { - struct config_group group; -}; - -static inline struct simple_children *to_simple_children(struct config_item *item) -{ - return item ? container_of(to_config_group(item), struct simple_children, group) : NULL; -} - -static struct config_item *simple_children_make_item(struct config_group *group, const char *name) -{ - struct simple_child *simple_child; - - simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL); - if (!simple_child) - return ERR_PTR(-ENOMEM); - - - config_item_init_type_name(&simple_child->item, name, - &simple_child_type); - - simple_child->storeme = 0; - - return &simple_child->item; -} - -static struct configfs_attribute simple_children_attr_description = { - .ca_owner = THIS_MODULE, - .ca_name = "description", - .ca_mode = S_IRUGO, -}; - -static struct configfs_attribute *simple_children_attrs[] = { - &simple_children_attr_description, - NULL, -}; - -static ssize_t simple_children_attr_show(struct config_item *item, - struct configfs_attribute *attr, - char *page) -{ - return sprintf(page, -"[02-simple-children]\n" -"\n" -"This subsystem allows the creation of child config_items. These\n" -"items have only one attribute that is readable and writeable.\n"); -} - -static void simple_children_release(struct config_item *item) -{ - kfree(to_simple_children(item)); -} - -static struct configfs_item_operations simple_children_item_ops = { - .release = simple_children_release, - .show_attribute = simple_children_attr_show, -}; - -/* - * Note that, since no extra work is required on ->drop_item(), - * no ->drop_item() is provided. - */ -static struct configfs_group_operations simple_children_group_ops = { - .make_item = simple_children_make_item, -}; - -static struct config_item_type simple_children_type = { - .ct_item_ops = &simple_children_item_ops, - .ct_group_ops = &simple_children_group_ops, - .ct_attrs = simple_children_attrs, - .ct_owner = THIS_MODULE, -}; - -static struct configfs_subsystem simple_children_subsys = { - .su_group = { - .cg_item = { - .ci_namebuf = "02-simple-children", - .ci_type = &simple_children_type, - }, - }, -}; - - -/* ----------------------------------------------------------------- */ - -/* - * 03-group-children - * - * This example reuses the simple_children group from above. However, - * the simple_children group is not the subsystem itself, it is a - * child of the subsystem. Creation of a group in the subsystem creates - * a new simple_children group. That group can then have simple_child - * children of its own. - */ - -static struct config_group *group_children_make_group(struct config_group *group, const char *name) -{ - struct simple_children *simple_children; - - simple_children = kzalloc(sizeof(struct simple_children), - GFP_KERNEL); - if (!simple_children) - return ERR_PTR(-ENOMEM); - - - config_group_init_type_name(&simple_children->group, name, - &simple_children_type); - - return &simple_children->group; -} - -static struct configfs_attribute group_children_attr_description = { - .ca_owner = THIS_MODULE, - .ca_name = "description", - .ca_mode = S_IRUGO, -}; - -static struct configfs_attribute *group_children_attrs[] = { - &group_children_attr_description, - NULL, -}; - -static ssize_t group_children_attr_show(struct config_item *item, - struct configfs_attribute *attr, - char *page) -{ - return sprintf(page, -"[03-group-children]\n" -"\n" -"This subsystem allows the creation of child config_groups. These\n" -"groups are like the subsystem simple-children.\n"); -} - -static struct configfs_item_operations group_children_item_ops = { - .show_attribute = group_children_attr_show, -}; - -/* - * Note that, since no extra work is required on ->drop_item(), - * no ->drop_item() is provided. - */ -static struct configfs_group_operations group_children_group_ops = { - .make_group = group_children_make_group, -}; - -static struct config_item_type group_children_type = { - .ct_item_ops = &group_children_item_ops, - .ct_group_ops = &group_children_group_ops, - .ct_attrs = group_children_attrs, - .ct_owner = THIS_MODULE, -}; - -static struct configfs_subsystem group_children_subsys = { - .su_group = { - .cg_item = { - .ci_namebuf = "03-group-children", - .ci_type = &group_children_type, - }, - }, -}; - -/* ----------------------------------------------------------------- */ - -/* - * We're now done with our subsystem definitions. - * For convenience in this module, here's a list of them all. It - * allows the init function to easily register them. Most modules - * will only have one subsystem, and will only call register_subsystem - * on it directly. - */ -static struct configfs_subsystem *example_subsys[] = { - &childless_subsys.subsys, - &simple_children_subsys, - &group_children_subsys, - NULL, -}; - -static int __init configfs_example_init(void) -{ - int ret; - int i; - struct configfs_subsystem *subsys; - - for (i = 0; example_subsys[i]; i++) { - subsys = example_subsys[i]; - - config_group_init(&subsys->su_group); - mutex_init(&subsys->su_mutex); - ret = configfs_register_subsystem(subsys); - if (ret) { - printk(KERN_ERR "Error %d while registering subsystem %s\n", - ret, - subsys->su_group.cg_item.ci_namebuf); - goto out_unregister; - } - } - - return 0; - -out_unregister: - for (; i >= 0; i--) { - configfs_unregister_subsystem(example_subsys[i]); - } - - return ret; -} - -static void __exit configfs_example_exit(void) -{ - int i; - - for (i = 0; example_subsys[i]; i++) { - configfs_unregister_subsystem(example_subsys[i]); - } -} - -module_init(configfs_example_init); -module_exit(configfs_example_exit); -MODULE_LICENSE("GPL"); diff --git a/Documentation/filesystems/configfs/configfs_example_explicit.c b/Documentation/filesystems/configfs/configfs_example_explicit.c new file mode 100644 index 0000000000000000000000000000000000000000..d428cc9f07f399141e643fc6d8df8ce88433365b --- /dev/null +++ b/Documentation/filesystems/configfs/configfs_example_explicit.c @@ -0,0 +1,485 @@ +/* + * vim: noexpandtab ts=8 sts=0 sw=8: + * + * configfs_example_explicit.c - This file is a demonstration module + * containing a number of configfs subsystems. It explicitly defines + * each structure without using the helper macros defined in + * configfs.h. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + * + * Based on sysfs: + * sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel + * + * configfs Copyright (C) 2005 Oracle. All rights reserved. + */ + +#include +#include +#include + +#include + + + +/* + * 01-childless + * + * This first example is a childless subsystem. It cannot create + * any config_items. It just has attributes. + * + * Note that we are enclosing the configfs_subsystem inside a container. + * This is not necessary if a subsystem has no attributes directly + * on the subsystem. See the next example, 02-simple-children, for + * such a subsystem. + */ + +struct childless { + struct configfs_subsystem subsys; + int showme; + int storeme; +}; + +struct childless_attribute { + struct configfs_attribute attr; + ssize_t (*show)(struct childless *, char *); + ssize_t (*store)(struct childless *, const char *, size_t); +}; + +static inline struct childless *to_childless(struct config_item *item) +{ + return item ? container_of(to_configfs_subsystem(to_config_group(item)), struct childless, subsys) : NULL; +} + +static ssize_t childless_showme_read(struct childless *childless, + char *page) +{ + ssize_t pos; + + pos = sprintf(page, "%d\n", childless->showme); + childless->showme++; + + return pos; +} + +static ssize_t childless_storeme_read(struct childless *childless, + char *page) +{ + return sprintf(page, "%d\n", childless->storeme); +} + +static ssize_t childless_storeme_write(struct childless *childless, + const char *page, + size_t count) +{ + unsigned long tmp; + char *p = (char *) page; + + tmp = simple_strtoul(p, &p, 10); + if (!p || (*p && (*p != '\n'))) + return -EINVAL; + + if (tmp > INT_MAX) + return -ERANGE; + + childless->storeme = tmp; + + return count; +} + +static ssize_t childless_description_read(struct childless *childless, + char *page) +{ + return sprintf(page, +"[01-childless]\n" +"\n" +"The childless subsystem is the simplest possible subsystem in\n" +"configfs. It does not support the creation of child config_items.\n" +"It only has a few attributes. In fact, it isn't much different\n" +"than a directory in /proc.\n"); +} + +static struct childless_attribute childless_attr_showme = { + .attr = { .ca_owner = THIS_MODULE, .ca_name = "showme", .ca_mode = S_IRUGO }, + .show = childless_showme_read, +}; +static struct childless_attribute childless_attr_storeme = { + .attr = { .ca_owner = THIS_MODULE, .ca_name = "storeme", .ca_mode = S_IRUGO | S_IWUSR }, + .show = childless_storeme_read, + .store = childless_storeme_write, +}; +static struct childless_attribute childless_attr_description = { + .attr = { .ca_owner = THIS_MODULE, .ca_name = "description", .ca_mode = S_IRUGO }, + .show = childless_description_read, +}; + +static struct configfs_attribute *childless_attrs[] = { + &childless_attr_showme.attr, + &childless_attr_storeme.attr, + &childless_attr_description.attr, + NULL, +}; + +static ssize_t childless_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + struct childless *childless = to_childless(item); + struct childless_attribute *childless_attr = + container_of(attr, struct childless_attribute, attr); + ssize_t ret = 0; + + if (childless_attr->show) + ret = childless_attr->show(childless, page); + return ret; +} + +static ssize_t childless_attr_store(struct config_item *item, + struct configfs_attribute *attr, + const char *page, size_t count) +{ + struct childless *childless = to_childless(item); + struct childless_attribute *childless_attr = + container_of(attr, struct childless_attribute, attr); + ssize_t ret = -EINVAL; + + if (childless_attr->store) + ret = childless_attr->store(childless, page, count); + return ret; +} + +static struct configfs_item_operations childless_item_ops = { + .show_attribute = childless_attr_show, + .store_attribute = childless_attr_store, +}; + +static struct config_item_type childless_type = { + .ct_item_ops = &childless_item_ops, + .ct_attrs = childless_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct childless childless_subsys = { + .subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "01-childless", + .ci_type = &childless_type, + }, + }, + }, +}; + + +/* ----------------------------------------------------------------- */ + +/* + * 02-simple-children + * + * This example merely has a simple one-attribute child. Note that + * there is no extra attribute structure, as the child's attribute is + * known from the get-go. Also, there is no container for the + * subsystem, as it has no attributes of its own. + */ + +struct simple_child { + struct config_item item; + int storeme; +}; + +static inline struct simple_child *to_simple_child(struct config_item *item) +{ + return item ? container_of(item, struct simple_child, item) : NULL; +} + +static struct configfs_attribute simple_child_attr_storeme = { + .ca_owner = THIS_MODULE, + .ca_name = "storeme", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute *simple_child_attrs[] = { + &simple_child_attr_storeme, + NULL, +}; + +static ssize_t simple_child_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + ssize_t count; + struct simple_child *simple_child = to_simple_child(item); + + count = sprintf(page, "%d\n", simple_child->storeme); + + return count; +} + +static ssize_t simple_child_attr_store(struct config_item *item, + struct configfs_attribute *attr, + const char *page, size_t count) +{ + struct simple_child *simple_child = to_simple_child(item); + unsigned long tmp; + char *p = (char *) page; + + tmp = simple_strtoul(p, &p, 10); + if (!p || (*p && (*p != '\n'))) + return -EINVAL; + + if (tmp > INT_MAX) + return -ERANGE; + + simple_child->storeme = tmp; + + return count; +} + +static void simple_child_release(struct config_item *item) +{ + kfree(to_simple_child(item)); +} + +static struct configfs_item_operations simple_child_item_ops = { + .release = simple_child_release, + .show_attribute = simple_child_attr_show, + .store_attribute = simple_child_attr_store, +}; + +static struct config_item_type simple_child_type = { + .ct_item_ops = &simple_child_item_ops, + .ct_attrs = simple_child_attrs, + .ct_owner = THIS_MODULE, +}; + + +struct simple_children { + struct config_group group; +}; + +static inline struct simple_children *to_simple_children(struct config_item *item) +{ + return item ? container_of(to_config_group(item), struct simple_children, group) : NULL; +} + +static struct config_item *simple_children_make_item(struct config_group *group, const char *name) +{ + struct simple_child *simple_child; + + simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL); + if (!simple_child) + return ERR_PTR(-ENOMEM); + + config_item_init_type_name(&simple_child->item, name, + &simple_child_type); + + simple_child->storeme = 0; + + return &simple_child->item; +} + +static struct configfs_attribute simple_children_attr_description = { + .ca_owner = THIS_MODULE, + .ca_name = "description", + .ca_mode = S_IRUGO, +}; + +static struct configfs_attribute *simple_children_attrs[] = { + &simple_children_attr_description, + NULL, +}; + +static ssize_t simple_children_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + return sprintf(page, +"[02-simple-children]\n" +"\n" +"This subsystem allows the creation of child config_items. These\n" +"items have only one attribute that is readable and writeable.\n"); +} + +static void simple_children_release(struct config_item *item) +{ + kfree(to_simple_children(item)); +} + +static struct configfs_item_operations simple_children_item_ops = { + .release = simple_children_release, + .show_attribute = simple_children_attr_show, +}; + +/* + * Note that, since no extra work is required on ->drop_item(), + * no ->drop_item() is provided. + */ +static struct configfs_group_operations simple_children_group_ops = { + .make_item = simple_children_make_item, +}; + +static struct config_item_type simple_children_type = { + .ct_item_ops = &simple_children_item_ops, + .ct_group_ops = &simple_children_group_ops, + .ct_attrs = simple_children_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem simple_children_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "02-simple-children", + .ci_type = &simple_children_type, + }, + }, +}; + + +/* ----------------------------------------------------------------- */ + +/* + * 03-group-children + * + * This example reuses the simple_children group from above. However, + * the simple_children group is not the subsystem itself, it is a + * child of the subsystem. Creation of a group in the subsystem creates + * a new simple_children group. That group can then have simple_child + * children of its own. + */ + +static struct config_group *group_children_make_group(struct config_group *group, const char *name) +{ + struct simple_children *simple_children; + + simple_children = kzalloc(sizeof(struct simple_children), + GFP_KERNEL); + if (!simple_children) + return ERR_PTR(-ENOMEM); + + config_group_init_type_name(&simple_children->group, name, + &simple_children_type); + + return &simple_children->group; +} + +static struct configfs_attribute group_children_attr_description = { + .ca_owner = THIS_MODULE, + .ca_name = "description", + .ca_mode = S_IRUGO, +}; + +static struct configfs_attribute *group_children_attrs[] = { + &group_children_attr_description, + NULL, +}; + +static ssize_t group_children_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + return sprintf(page, +"[03-group-children]\n" +"\n" +"This subsystem allows the creation of child config_groups. These\n" +"groups are like the subsystem simple-children.\n"); +} + +static struct configfs_item_operations group_children_item_ops = { + .show_attribute = group_children_attr_show, +}; + +/* + * Note that, since no extra work is required on ->drop_item(), + * no ->drop_item() is provided. + */ +static struct configfs_group_operations group_children_group_ops = { + .make_group = group_children_make_group, +}; + +static struct config_item_type group_children_type = { + .ct_item_ops = &group_children_item_ops, + .ct_group_ops = &group_children_group_ops, + .ct_attrs = group_children_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem group_children_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "03-group-children", + .ci_type = &group_children_type, + }, + }, +}; + +/* ----------------------------------------------------------------- */ + +/* + * We're now done with our subsystem definitions. + * For convenience in this module, here's a list of them all. It + * allows the init function to easily register them. Most modules + * will only have one subsystem, and will only call register_subsystem + * on it directly. + */ +static struct configfs_subsystem *example_subsys[] = { + &childless_subsys.subsys, + &simple_children_subsys, + &group_children_subsys, + NULL, +}; + +static int __init configfs_example_init(void) +{ + int ret; + int i; + struct configfs_subsystem *subsys; + + for (i = 0; example_subsys[i]; i++) { + subsys = example_subsys[i]; + + config_group_init(&subsys->su_group); + mutex_init(&subsys->su_mutex); + ret = configfs_register_subsystem(subsys); + if (ret) { + printk(KERN_ERR "Error %d while registering subsystem %s\n", + ret, + subsys->su_group.cg_item.ci_namebuf); + goto out_unregister; + } + } + + return 0; + +out_unregister: + for (; i >= 0; i--) { + configfs_unregister_subsystem(example_subsys[i]); + } + + return ret; +} + +static void __exit configfs_example_exit(void) +{ + int i; + + for (i = 0; example_subsys[i]; i++) { + configfs_unregister_subsystem(example_subsys[i]); + } +} + +module_init(configfs_example_init); +module_exit(configfs_example_exit); +MODULE_LICENSE("GPL"); diff --git a/Documentation/filesystems/configfs/configfs_example_macros.c b/Documentation/filesystems/configfs/configfs_example_macros.c new file mode 100644 index 0000000000000000000000000000000000000000..d8e30a0378aa2bf3540a79da4ff030d402943497 --- /dev/null +++ b/Documentation/filesystems/configfs/configfs_example_macros.c @@ -0,0 +1,448 @@ +/* + * vim: noexpandtab ts=8 sts=0 sw=8: + * + * configfs_example_macros.c - This file is a demonstration module + * containing a number of configfs subsystems. It uses the helper + * macros defined by configfs.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + * + * Based on sysfs: + * sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel + * + * configfs Copyright (C) 2005 Oracle. All rights reserved. + */ + +#include +#include +#include + +#include + + + +/* + * 01-childless + * + * This first example is a childless subsystem. It cannot create + * any config_items. It just has attributes. + * + * Note that we are enclosing the configfs_subsystem inside a container. + * This is not necessary if a subsystem has no attributes directly + * on the subsystem. See the next example, 02-simple-children, for + * such a subsystem. + */ + +struct childless { + struct configfs_subsystem subsys; + int showme; + int storeme; +}; + +static inline struct childless *to_childless(struct config_item *item) +{ + return item ? container_of(to_configfs_subsystem(to_config_group(item)), struct childless, subsys) : NULL; +} + +CONFIGFS_ATTR_STRUCT(childless); +#define CHILDLESS_ATTR(_name, _mode, _show, _store) \ +struct childless_attribute childless_attr_##_name = __CONFIGFS_ATTR(_name, _mode, _show, _store) +#define CHILDLESS_ATTR_RO(_name, _show) \ +struct childless_attribute childless_attr_##_name = __CONFIGFS_ATTR_RO(_name, _show); + +static ssize_t childless_showme_read(struct childless *childless, + char *page) +{ + ssize_t pos; + + pos = sprintf(page, "%d\n", childless->showme); + childless->showme++; + + return pos; +} + +static ssize_t childless_storeme_read(struct childless *childless, + char *page) +{ + return sprintf(page, "%d\n", childless->storeme); +} + +static ssize_t childless_storeme_write(struct childless *childless, + const char *page, + size_t count) +{ + unsigned long tmp; + char *p = (char *) page; + + tmp = simple_strtoul(p, &p, 10); + if (!p || (*p && (*p != '\n'))) + return -EINVAL; + + if (tmp > INT_MAX) + return -ERANGE; + + childless->storeme = tmp; + + return count; +} + +static ssize_t childless_description_read(struct childless *childless, + char *page) +{ + return sprintf(page, +"[01-childless]\n" +"\n" +"The childless subsystem is the simplest possible subsystem in\n" +"configfs. It does not support the creation of child config_items.\n" +"It only has a few attributes. In fact, it isn't much different\n" +"than a directory in /proc.\n"); +} + +CHILDLESS_ATTR_RO(showme, childless_showme_read); +CHILDLESS_ATTR(storeme, S_IRUGO | S_IWUSR, childless_storeme_read, + childless_storeme_write); +CHILDLESS_ATTR_RO(description, childless_description_read); + +static struct configfs_attribute *childless_attrs[] = { + &childless_attr_showme.attr, + &childless_attr_storeme.attr, + &childless_attr_description.attr, + NULL, +}; + +CONFIGFS_ATTR_OPS(childless); +static struct configfs_item_operations childless_item_ops = { + .show_attribute = childless_attr_show, + .store_attribute = childless_attr_store, +}; + +static struct config_item_type childless_type = { + .ct_item_ops = &childless_item_ops, + .ct_attrs = childless_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct childless childless_subsys = { + .subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "01-childless", + .ci_type = &childless_type, + }, + }, + }, +}; + + +/* ----------------------------------------------------------------- */ + +/* + * 02-simple-children + * + * This example merely has a simple one-attribute child. Note that + * there is no extra attribute structure, as the child's attribute is + * known from the get-go. Also, there is no container for the + * subsystem, as it has no attributes of its own. + */ + +struct simple_child { + struct config_item item; + int storeme; +}; + +static inline struct simple_child *to_simple_child(struct config_item *item) +{ + return item ? container_of(item, struct simple_child, item) : NULL; +} + +static struct configfs_attribute simple_child_attr_storeme = { + .ca_owner = THIS_MODULE, + .ca_name = "storeme", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute *simple_child_attrs[] = { + &simple_child_attr_storeme, + NULL, +}; + +static ssize_t simple_child_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + ssize_t count; + struct simple_child *simple_child = to_simple_child(item); + + count = sprintf(page, "%d\n", simple_child->storeme); + + return count; +} + +static ssize_t simple_child_attr_store(struct config_item *item, + struct configfs_attribute *attr, + const char *page, size_t count) +{ + struct simple_child *simple_child = to_simple_child(item); + unsigned long tmp; + char *p = (char *) page; + + tmp = simple_strtoul(p, &p, 10); + if (!p || (*p && (*p != '\n'))) + return -EINVAL; + + if (tmp > INT_MAX) + return -ERANGE; + + simple_child->storeme = tmp; + + return count; +} + +static void simple_child_release(struct config_item *item) +{ + kfree(to_simple_child(item)); +} + +static struct configfs_item_operations simple_child_item_ops = { + .release = simple_child_release, + .show_attribute = simple_child_attr_show, + .store_attribute = simple_child_attr_store, +}; + +static struct config_item_type simple_child_type = { + .ct_item_ops = &simple_child_item_ops, + .ct_attrs = simple_child_attrs, + .ct_owner = THIS_MODULE, +}; + + +struct simple_children { + struct config_group group; +}; + +static inline struct simple_children *to_simple_children(struct config_item *item) +{ + return item ? container_of(to_config_group(item), struct simple_children, group) : NULL; +} + +static struct config_item *simple_children_make_item(struct config_group *group, const char *name) +{ + struct simple_child *simple_child; + + simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL); + if (!simple_child) + return ERR_PTR(-ENOMEM); + + config_item_init_type_name(&simple_child->item, name, + &simple_child_type); + + simple_child->storeme = 0; + + return &simple_child->item; +} + +static struct configfs_attribute simple_children_attr_description = { + .ca_owner = THIS_MODULE, + .ca_name = "description", + .ca_mode = S_IRUGO, +}; + +static struct configfs_attribute *simple_children_attrs[] = { + &simple_children_attr_description, + NULL, +}; + +static ssize_t simple_children_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + return sprintf(page, +"[02-simple-children]\n" +"\n" +"This subsystem allows the creation of child config_items. These\n" +"items have only one attribute that is readable and writeable.\n"); +} + +static void simple_children_release(struct config_item *item) +{ + kfree(to_simple_children(item)); +} + +static struct configfs_item_operations simple_children_item_ops = { + .release = simple_children_release, + .show_attribute = simple_children_attr_show, +}; + +/* + * Note that, since no extra work is required on ->drop_item(), + * no ->drop_item() is provided. + */ +static struct configfs_group_operations simple_children_group_ops = { + .make_item = simple_children_make_item, +}; + +static struct config_item_type simple_children_type = { + .ct_item_ops = &simple_children_item_ops, + .ct_group_ops = &simple_children_group_ops, + .ct_attrs = simple_children_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem simple_children_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "02-simple-children", + .ci_type = &simple_children_type, + }, + }, +}; + + +/* ----------------------------------------------------------------- */ + +/* + * 03-group-children + * + * This example reuses the simple_children group from above. However, + * the simple_children group is not the subsystem itself, it is a + * child of the subsystem. Creation of a group in the subsystem creates + * a new simple_children group. That group can then have simple_child + * children of its own. + */ + +static struct config_group *group_children_make_group(struct config_group *group, const char *name) +{ + struct simple_children *simple_children; + + simple_children = kzalloc(sizeof(struct simple_children), + GFP_KERNEL); + if (!simple_children) + return ERR_PTR(-ENOMEM); + + config_group_init_type_name(&simple_children->group, name, + &simple_children_type); + + return &simple_children->group; +} + +static struct configfs_attribute group_children_attr_description = { + .ca_owner = THIS_MODULE, + .ca_name = "description", + .ca_mode = S_IRUGO, +}; + +static struct configfs_attribute *group_children_attrs[] = { + &group_children_attr_description, + NULL, +}; + +static ssize_t group_children_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + return sprintf(page, +"[03-group-children]\n" +"\n" +"This subsystem allows the creation of child config_groups. These\n" +"groups are like the subsystem simple-children.\n"); +} + +static struct configfs_item_operations group_children_item_ops = { + .show_attribute = group_children_attr_show, +}; + +/* + * Note that, since no extra work is required on ->drop_item(), + * no ->drop_item() is provided. + */ +static struct configfs_group_operations group_children_group_ops = { + .make_group = group_children_make_group, +}; + +static struct config_item_type group_children_type = { + .ct_item_ops = &group_children_item_ops, + .ct_group_ops = &group_children_group_ops, + .ct_attrs = group_children_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem group_children_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "03-group-children", + .ci_type = &group_children_type, + }, + }, +}; + +/* ----------------------------------------------------------------- */ + +/* + * We're now done with our subsystem definitions. + * For convenience in this module, here's a list of them all. It + * allows the init function to easily register them. Most modules + * will only have one subsystem, and will only call register_subsystem + * on it directly. + */ +static struct configfs_subsystem *example_subsys[] = { + &childless_subsys.subsys, + &simple_children_subsys, + &group_children_subsys, + NULL, +}; + +static int __init configfs_example_init(void) +{ + int ret; + int i; + struct configfs_subsystem *subsys; + + for (i = 0; example_subsys[i]; i++) { + subsys = example_subsys[i]; + + config_group_init(&subsys->su_group); + mutex_init(&subsys->su_mutex); + ret = configfs_register_subsystem(subsys); + if (ret) { + printk(KERN_ERR "Error %d while registering subsystem %s\n", + ret, + subsys->su_group.cg_item.ci_namebuf); + goto out_unregister; + } + } + + return 0; + +out_unregister: + for (; i >= 0; i--) { + configfs_unregister_subsystem(example_subsys[i]); + } + + return ret; +} + +static void __exit configfs_example_exit(void) +{ + int i; + + for (i = 0; example_subsys[i]; i++) { + configfs_unregister_subsystem(example_subsys[i]); + } +} + +module_init(configfs_example_init); +module_exit(configfs_example_exit); +MODULE_LICENSE("GPL"); diff --git a/Documentation/filesystems/omfs.txt b/Documentation/filesystems/omfs.txt new file mode 100644 index 0000000000000000000000000000000000000000..1d0d41ff5c65cdc75454d958ad58b367a9e2464c --- /dev/null +++ b/Documentation/filesystems/omfs.txt @@ -0,0 +1,106 @@ +Optimized MPEG Filesystem (OMFS) + +Overview +======== + +OMFS is a filesystem created by SonicBlue for use in the ReplayTV DVR +and Rio Karma MP3 player. The filesystem is extent-based, utilizing +block sizes from 2k to 8k, with hash-based directories. This +filesystem driver may be used to read and write disks from these +devices. + +Note, it is not recommended that this FS be used in place of a general +filesystem for your own streaming media device. Native Linux filesystems +will likely perform better. + +More information is available at: + + http://linux-karma.sf.net/ + +Various utilities, including mkomfs and omfsck, are included with +omfsprogs, available at: + + http://bobcopeland.com/karma/ + +Instructions are included in its README. + +Options +======= + +OMFS supports the following mount-time options: + + uid=n - make all files owned by specified user + gid=n - make all files owned by specified group + umask=xxx - set permission umask to xxx + fmask=xxx - set umask to xxx for files + dmask=xxx - set umask to xxx for directories + +Disk format +=========== + +OMFS discriminates between "sysblocks" and normal data blocks. The sysblock +group consists of super block information, file metadata, directory structures, +and extents. Each sysblock has a header containing CRCs of the entire +sysblock, and may be mirrored in successive blocks on the disk. A sysblock may +have a smaller size than a data block, but since they are both addressed by the +same 64-bit block number, any remaining space in the smaller sysblock is +unused. + +Sysblock header information: + +struct omfs_header { + __be64 h_self; /* FS block where this is located */ + __be32 h_body_size; /* size of useful data after header */ + __be16 h_crc; /* crc-ccitt of body_size bytes */ + char h_fill1[2]; + u8 h_version; /* version, always 1 */ + char h_type; /* OMFS_INODE_X */ + u8 h_magic; /* OMFS_IMAGIC */ + u8 h_check_xor; /* XOR of header bytes before this */ + __be32 h_fill2; +}; + +Files and directories are both represented by omfs_inode: + +struct omfs_inode { + struct omfs_header i_head; /* header */ + __be64 i_parent; /* parent containing this inode */ + __be64 i_sibling; /* next inode in hash bucket */ + __be64 i_ctime; /* ctime, in milliseconds */ + char i_fill1[35]; + char i_type; /* OMFS_[DIR,FILE] */ + __be32 i_fill2; + char i_fill3[64]; + char i_name[OMFS_NAMELEN]; /* filename */ + __be64 i_size; /* size of file, in bytes */ +}; + +Directories in OMFS are implemented as a large hash table. Filenames are +hashed then prepended into the bucket list beginning at OMFS_DIR_START. +Lookup requires hashing the filename, then seeking across i_sibling pointers +until a match is found on i_name. Empty buckets are represented by block +pointers with all-1s (~0). + +A file is an omfs_inode structure followed by an extent table beginning at +OMFS_EXTENT_START: + +struct omfs_extent_entry { + __be64 e_cluster; /* start location of a set of blocks */ + __be64 e_blocks; /* number of blocks after e_cluster */ +}; + +struct omfs_extent { + __be64 e_next; /* next extent table location */ + __be32 e_extent_count; /* total # extents in this table */ + __be32 e_fill; + struct omfs_extent_entry e_entry; /* start of extent entries */ +}; + +Each extent holds the block offset followed by number of blocks allocated to +the extent. The final extent in each table is a terminator with e_cluster +being ~0 and e_blocks being ones'-complement of the total number of blocks +in the table. + +If this table overflows, a continuation inode is written and pointed to by +e_next. These have a header but lack the rest of the inode structure. + diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 7f268f327d750e725f1e5ca5ddfe99dcb8014cd5..64557821ee5984f5babe336f701f172b8602a4dc 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -296,6 +296,7 @@ Table 1-4: Kernel info in /proc uptime System uptime version Kernel version video bttv info of video resources (2.4) + vmallocinfo Show vmalloced areas .............................................................................. You can, for example, check which interrupts are currently in use and what @@ -557,6 +558,49 @@ VmallocTotal: total size of vmalloc memory area VmallocUsed: amount of vmalloc area which is used VmallocChunk: largest contigious block of vmalloc area which is free +.............................................................................. + +vmallocinfo: + +Provides information about vmalloced/vmaped areas. One line per area, +containing the virtual address range of the area, size in bytes, +caller information of the creator, and optional information depending +on the kind of area : + + pages=nr number of pages + phys=addr if a physical address was specified + ioremap I/O mapping (ioremap() and friends) + vmalloc vmalloc() area + vmap vmap()ed pages + user VM_USERMAP area + vpages buffer for pages pointers was vmalloced (huge area) + N=nr (Only on NUMA kernels) + Number of pages allocated on memory node + +> cat /proc/vmallocinfo +0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ... + /0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128 +0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ... + /0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64 +0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f... + phys=7fee8000 ioremap +0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f... + phys=7fee7000 ioremap +0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210 +0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ... + /0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3 +0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ... + pages=2 vmalloc N1=2 +0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ... + /0x130 [x_tables] pages=4 vmalloc N0=4 +0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ... + pages=14 vmalloc N2=14 +0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ... + pages=4 vmalloc N1=4 +0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ... + pages=2 vmalloc N1=2 +0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ... + pages=10 vmalloc N0=10 1.3 IDE devices in /proc/ide ---------------------------- @@ -887,7 +931,7 @@ group_prealloc max_to_scan mb_groups mb_history min_to_scan order2_req stats stream_req mb_groups: -This file gives the details of mutiblock allocator buddy cache of free blocks +This file gives the details of multiblock allocator buddy cache of free blocks mb_history: Multiblock allocation history. @@ -1430,7 +1474,7 @@ used because pages_free(1355) is smaller than watermark + protection[2] normal page requirement. If requirement is DMA zone(index=0), protection[0] (=0) is used. -zone[i]'s protection[j] is calculated by following exprssion. +zone[i]'s protection[j] is calculated by following expression. (i < j): zone[i]->protection[j] diff --git a/Documentation/filesystems/quota.txt b/Documentation/filesystems/quota.txt index a590c4093eff87470baebc430a1cb0034f8f93db..5e8de25bf0f1ec86aac76ad6a102d557b883603f 100644 --- a/Documentation/filesystems/quota.txt +++ b/Documentation/filesystems/quota.txt @@ -3,14 +3,14 @@ Quota subsystem =============== Quota subsystem allows system administrator to set limits on used space and -number of used inodes (inode is a filesystem structure which is associated -with each file or directory) for users and/or groups. For both used space and -number of used inodes there are actually two limits. The first one is called -softlimit and the second one hardlimit. An user can never exceed a hardlimit -for any resource. User is allowed to exceed softlimit but only for limited -period of time. This period is called "grace period" or "grace time". When -grace time is over, user is not able to allocate more space/inodes until he -frees enough of them to get below softlimit. +number of used inodes (inode is a filesystem structure which is associated with +each file or directory) for users and/or groups. For both used space and number +of used inodes there are actually two limits. The first one is called softlimit +and the second one hardlimit. An user can never exceed a hardlimit for any +resource (unless he has CAP_SYS_RESOURCE capability). User is allowed to exceed +softlimit but only for limited period of time. This period is called "grace +period" or "grace time". When grace time is over, user is not able to allocate +more space/inodes until he frees enough of them to get below softlimit. Quota limits (and amount of grace time) are set independently for each filesystem. @@ -53,6 +53,12 @@ in parentheses): QUOTA_NL_BSOFTLONGWARN - space (block) softlimit is exceeded longer than given grace period. QUOTA_NL_BSOFTWARN - space (block) softlimit + - four warnings are also defined for the event when user stops + exceeding some limit: + QUOTA_NL_IHARDBELOW - inode hardlimit + QUOTA_NL_ISOFTBELOW - inode softlimit + QUOTA_NL_BHARDBELOW - space (block) hardlimit + QUOTA_NL_BSOFTBELOW - space (block) softlimit QUOTA_NL_A_DEV_MAJOR (u32) - major number of a device with the affected filesystem QUOTA_NL_A_DEV_MINOR (u32) diff --git a/Documentation/filesystems/relay.txt b/Documentation/filesystems/relay.txt index 094f2d2f38b1a5571283ee745aa494c12b12808c..510b722667ac885cf7abed3732961941a5ad1c14 100644 --- a/Documentation/filesystems/relay.txt +++ b/Documentation/filesystems/relay.txt @@ -294,6 +294,16 @@ user-defined data with a channel, and is immediately available (including in create_buf_file()) via chan->private_data or buf->chan->private_data. +Buffer-only channels +-------------------- + +These channels have no files associated and can be created with +relay_open(NULL, NULL, ...). Such channels are useful in scenarios such +as when doing early tracing in the kernel, before the VFS is up. In these +cases, one may open a buffer-only channel and then call +relay_late_setup_files() when the kernel is ready to handle files, +to expose the buffered data to the userspace. + Channel 'modes' --------------- diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt index 2d5e1e582e13272bfaef2fbc494a156d829cc289..bbac4f1d90567c3f7ea0f46a869c091160390076 100644 --- a/Documentation/filesystems/vfat.txt +++ b/Documentation/filesystems/vfat.txt @@ -96,6 +96,14 @@ shortname=lower|win95|winnt|mixed emulate the Windows 95 rule for create. Default setting is `lower'. +tz=UTC -- Interpret timestamps as UTC rather than local time. + This option disables the conversion of timestamps + between local time (as used by Windows on FAT) and UTC + (which Linux uses internally). This is particuluarly + useful when mounting devices (like digital cameras) + that are set to UTC in order to avoid the pitfalls of + local time. + : 0,1,yes,no,true,false TODO diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index b7522c6cbae3758f77cb12e22b78825e43a3796d..c4d348dabe9499454055ebff41fb88ef71346dda 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -143,7 +143,7 @@ struct file_system_type { The get_sb() method has the following arguments: - struct file_system_type *fs_type: decribes the filesystem, partly initialized + struct file_system_type *fs_type: describes the filesystem, partly initialized by the specific filesystem code int flags: mount flags @@ -895,9 +895,9 @@ struct dentry_operations { iput() yourself d_dname: called when the pathname of a dentry should be generated. - Usefull for some pseudo filesystems (sockfs, pipefs, ...) to delay + Useful for some pseudo filesystems (sockfs, pipefs, ...) to delay pathname generation. (Instead of doing it when dentry is created, - its done only when the path is needed.). Real filesystems probably + it's done only when the path is needed.). Real filesystems probably dont want to use it, because their dentries are present in global dcache hash, so their hash should be an invariant. As no lock is held, d_dname() should not try to modify the dentry itself, unless diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index f218f616ff6bbf79e6b6aa6987f64a41142df5f0..d330fe3103da9c9a3cb8f888ac7255ce48e666d4 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -4,6 +4,7 @@ Copyright 2008 Red Hat Inc. Author: Steven Rostedt License: The GNU Free Documentation License, Version 1.2 + (dual licensed under the GPL v2) Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton, John Kacur, and David Teigland. diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index c35ca9e40d4ca8ae0cbf7c06c639d8531ae8d9dd..18022e249c53dc1ad991d74d160551fa32f32070 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -347,15 +347,12 @@ necessarily be nonportable. Dynamic definition of GPIOs is not currently standard; for example, as a side effect of configuring an add-on board with some GPIO expanders. -These calls are purely for kernel space, but a userspace API could be built -on top of them. - GPIO implementor's framework (OPTIONAL) ======================================= As noted earlier, there is an optional implementation framework making it easier for platforms to support different kinds of GPIO controller using -the same programming interface. +the same programming interface. This framework is called "gpiolib". As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file will be found there. That will list all the controllers registered through @@ -392,11 +389,21 @@ either NULL or the label associated with that GPIO when it was requested. Platform Support ---------------- -To support this framework, a platform's Kconfig will "select HAVE_GPIO_LIB" +To support this framework, a platform's Kconfig will "select" either +ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB and arrange that its includes and defines three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep(). They may also want to provide a custom value for ARCH_NR_GPIOS. +ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled +into the kernel on that architecture. + +ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user +can enable it and build it into the kernel optionally. + +If neither of these options are selected, the platform does not support +GPIOs through GPIO-lib and the code cannot be enabled by the user. + Trivial implementations of those functions can directly use framework code, which always dispatches through the gpio_chip: @@ -439,4 +446,120 @@ becomes available. That may mean the device should not be registered until calls for that GPIO can work. One way to address such dependencies is for such gpio_chip controllers to provide setup() and teardown() callbacks to board specific code; those board specific callbacks would register devices -once all the necessary resources are available. +once all the necessary resources are available, and remove them later when +the GPIO controller device becomes unavailable. + + +Sysfs Interface for Userspace (OPTIONAL) +======================================== +Platforms which use the "gpiolib" implementors framework may choose to +configure a sysfs user interface to GPIOs. This is different from the +debugfs interface, since it provides control over GPIO direction and +value instead of just showing a gpio state summary. Plus, it could be +present on production systems without debugging support. + +Given approprate hardware documentation for the system, userspace could +know for example that GPIO #23 controls the write protect line used to +protect boot loader segments in flash memory. System upgrade procedures +may need to temporarily remove that protection, first importing a GPIO, +then changing its output state, then updating the code before re-enabling +the write protection. In normal use, GPIO #23 would never be touched, +and the kernel would have no need to know about it. + +Again depending on appropriate hardware documentation, on some systems +userspace GPIO can be used to determine system configuration data that +standard kernels won't know about. And for some tasks, simple userspace +GPIO drivers could be all that the system really needs. + +Note that standard kernel drivers exist for common "LEDs and Buttons" +GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those +instead of talking directly to the GPIOs; they integrate with kernel +frameworks better than your userspace code could. + + +Paths in Sysfs +-------------- +There are three kinds of entry in /sys/class/gpio: + + - Control interfaces used to get userspace control over GPIOs; + + - GPIOs themselves; and + + - GPIO controllers ("gpio_chip" instances). + +That's in addition to standard files including the "device" symlink. + +The control interfaces are write-only: + + /sys/class/gpio/ + + "export" ... Userspace may ask the kernel to export control of + a GPIO to userspace by writing its number to this file. + + Example: "echo 19 > export" will create a "gpio19" node + for GPIO #19, if that's not requested by kernel code. + + "unexport" ... Reverses the effect of exporting to userspace. + + Example: "echo 19 > unexport" will remove a "gpio19" + node exported using the "export" file. + +GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42) +and have the following read/write attributes: + + /sys/class/gpio/gpioN/ + + "direction" ... reads as either "in" or "out". This value may + normally be written. Writing as "out" defaults to + initializing the value as low. To ensure glitch free + operation, values "low" and "high" may be written to + configure the GPIO as an output with that initial value. + + Note that this attribute *will not exist* if the kernel + doesn't support changing the direction of a GPIO, or + it was exported by kernel code that didn't explicitly + allow userspace to reconfigure this GPIO's direction. + + "value" ... reads as either 0 (low) or 1 (high). If the GPIO + is configured as an output, this value may be written; + any nonzero value is treated as high. + +GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the +controller implementing GPIOs starting at #42) and have the following +read-only attributes: + + /sys/class/gpio/gpiochipN/ + + "base" ... same as N, the first GPIO managed by this chip + + "label" ... provided for diagnostics (not always unique) + + "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1) + +Board documentation should in most cases cover what GPIOs are used for +what purposes. However, those numbers are not always stable; GPIOs on +a daughtercard might be different depending on the base board being used, +or other cards in the stack. In such cases, you may need to use the +gpiochip nodes (possibly in conjunction with schematics) to determine +the correct GPIO number to use for a given signal. + + +Exporting from Kernel code +-------------------------- +Kernel code can explicitly manage exports of GPIOs which have already been +requested using gpio_request(): + + /* export the GPIO to userspace */ + int gpio_export(unsigned gpio, bool direction_may_change); + + /* reverse gpio_export() */ + void gpio_unexport(); + +After a kernel driver requests a GPIO, it may only be made available in +the sysfs interface by gpio_export(). The driver can control whether the +signal direction may change. This helps drivers prevent userspace code +from accidentally clobbering important system state. + +This explicit exporting can help with debugging (by making some kinds +of experiments easier), or can provide an always-there interface that's +suitable for documenting as part of a board support package. diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737 index 8f446070e64a56ebc2c19a98c3f5e40688648b06..001d2e70bc1125f404274734f6ad0b4b7825ca34 100644 --- a/Documentation/hwmon/dme1737 +++ b/Documentation/hwmon/dme1737 @@ -10,6 +10,10 @@ Supported chips: Prefix: 'sch311x' Addresses scanned: none, address read from Super-I/O config space Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf + * SMSC SCH5027 + Prefix: 'sch5027' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: Provided by SMSC upon request and under NDA Authors: Juerg Haefliger @@ -22,34 +26,36 @@ Module Parameters and PWM output control functions. Using this parameter shouldn't be required since the BIOS usually takes care of this. - -Note that there is no need to use this parameter if the driver loads without -complaining. The driver will say so if it is necessary. +* probe_all_addr: bool Include non-standard LPC addresses 0x162e and 0x164e + when probing for ISA devices. This is required for the + following boards: + - VIA EPIA SN18000 Description ----------- This driver implements support for the hardware monitoring capabilities of the -SMSC DME1737 and Asus A8000 (which are the same) and SMSC SCH311x Super-I/O -chips. These chips feature monitoring of 3 temp sensors temp[1-3] (2 remote -diodes and 1 internal), 7 voltages in[0-6] (6 external and 1 internal) and up -to 6 fan speeds fan[1-6]. Additionally, the chips implement up to 5 PWM -outputs pwm[1-3,5-6] for controlling fan speeds both manually and +SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC +SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors +temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and +1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement +up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and automatically. -For the DME1737 and A8000, fan[1-2] and pwm[1-2] are always present. Fan[3-6] -and pwm[3,5-6] are optional features and their availability depends on the -configuration of the chip. The driver will detect which features are present -during initialization and create the sysfs attributes accordingly. +For the DME1737, A8000 and SCH5027, fan[1-2] and pwm[1-2] are always present. +Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on +the configuration of the chip. The driver will detect which features are +present during initialization and create the sysfs attributes accordingly. For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and pwm[5-6] don't exist. -The hardware monitoring features of the DME1737 and A8000 are only accessible -via SMBus, while the SCH311x only provides access via the ISA bus. The driver -will therefore register itself as an I2C client driver if it detects a DME1737 -or A8000 and as a platform driver if it detects a SCH311x chip. +The hardware monitoring features of the DME1737, A8000, and SCH5027 are only +accessible via SMBus, while the SCH311x only provides access via the ISA bus. +The driver will therefore register itself as an I2C client driver if it detects +a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x +chip. Voltage Monitoring @@ -60,6 +66,7 @@ scaling resistors. The values returned by the driver therefore reflect true millivolts and don't need scaling. The voltage inputs are mapped as follows (the last column indicates the input ranges): +DME1737, A8000: in0: +5VTR (+5V standby) 0V - 6.64V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -68,6 +75,24 @@ millivolts and don't need scaling. The voltage inputs are mapped as follows in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V +SCH311x: + in0: +2.5V 0V - 6.64V + in1: Vccp (processor core) 0V - 2V + in2: VCC (internal +3.3V) 0V - 4.38V + in3: +5V 0V - 6.64V + in4: +12V 0V - 16V + in5: VTR (+3.3V standby) 0V - 4.38V + in6: Vbat (+3.0V) 0V - 4.38V + +SCH5027: + in0: +5VTR (+5V standby) 0V - 6.64V + in1: Vccp (processor core) 0V - 3V + in2: VCC (internal +3.3V) 0V - 4.38V + in3: V2_IN 0V - 1.5V + in4: V1_IN 0V - 1.5V + in5: VTR (+3.3V standby) 0V - 4.38V + in6: Vbat (+3.0V) 0V - 4.38V + Each voltage input has associated min and max limits which trigger an alarm when crossed. diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index f4ce1fdbeff664b88bd35c735968d977f6d14efd..3496b7020e7c7207308e1d247a361aee081bd323 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -6,12 +6,14 @@ Supported chips: Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website - http://www.ite.com.tw/ + http://www.ite.com.tw/product_info/file/pc/IT8705F_V.0.4.1.pdf * IT8712F Prefix: 'it8712' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website - http://www.ite.com.tw/ + http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.1.pdf + http://www.ite.com.tw/product_info/file/pc/Errata%20V0.1%20for%20IT8712F%20V0.9.1.pdf + http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.3.pdf * IT8716F/IT8726F Prefix: 'it8716' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -90,14 +92,13 @@ upper VID bits share their pins with voltage inputs (in5 and in6) so you can't have both on a given board. The IT8716F, IT8718F and later IT8712F revisions have support for -2 additional fans. They are supported by the driver for the IT8716F and -IT8718F but not for the IT8712F +2 additional fans. The additional fans are supported by the driver. The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This is better (no more fan clock divider mess) but not compatible with the older chips and -revisions. For now, the driver only uses the 16-bit mode on the -IT8716F and IT8718F. +revisions. The 16-bit tachometer mode is enabled by the driver when one +of the above chips is detected. The IT8726F is just bit enhanced IT8716F with additional hardware for AMD power sequencing. Therefore the chip will appear as IT8716F diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index 9549237530cf8a08dbe1460f3f048802cea62567..6d41db7f17f8b5372a765504f2d6c173bfc2b372 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -96,11 +96,6 @@ initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has confirmed this "bug". The ADT7463 is reported to work as described in the documentation. The current lm85 driver does not show the offset register. -The ADT7463 has a THERM asserted counter. This counter has a 22.76ms -resolution and a range of 5.8 seconds. The driver implements a 32-bit -accumulator of the counter value to extend the range to over a year. The -counter will stay at it's max value until read. - See the vendor datasheets for more information. There is application note from National (AN-1260) with some additional information about the LM85. The Analog Devices datasheet is very detailed and describes a procedure for @@ -206,13 +201,15 @@ Configuration choices: The National LM85's have two vendor specific configuration features. Tach. mode and Spinup Control. For more details on these, -see the LM85 datasheet or Application Note AN-1260. +see the LM85 datasheet or Application Note AN-1260. These features +are not currently supported by the lm85 driver. The Analog Devices ADM1027 has several vendor specific enhancements. The number of pulses-per-rev of the fans can be set, Tach monitoring can be optimized for PWM operation, and an offset can be applied to the temperatures to compensate for systemic errors in the -measurements. +measurements. These features are not currently supported by the lm85 +driver. In addition to the ADM1027 features, the ADT7463 also has Tmin control and THERM asserted counts. Automatic Tmin control acts to adjust the diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf index 880a59f53da91d5f24d212945b2f0b6658b0531e..6ee36dbafd64afaee72a4c308ad20c39bb5d5f15 100644 --- a/Documentation/hwmon/w83627hf +++ b/Documentation/hwmon/w83627hf @@ -40,10 +40,6 @@ Module Parameters (default is 1) Use 'init=0' to bypass initializing the chip. Try this if your computer crashes when you load the module. -* reset: int - (default is 0) - The driver used to reset the chip on load, but does no more. Use - 'reset=1' to restore the old behavior. Report if you need to do this. Description ----------- diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index f153b2f6d62ca76958c2e80eb42efc3aa4c830be..a67d3b7a709831bb0f32f70ab30c1695693a2606 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -22,6 +22,7 @@ Credits: Additional contributors: Sven Anders + Marc Hulsman Module Parameters ----------------- @@ -67,9 +68,8 @@ on until the temperature falls below the Hysteresis value. Fan rotation speeds are reported in RPM (rotations per minute). An alarm is triggered if the rotation speed has dropped below a programmable limit. Fan -readings can be divided by a programmable divider (1, 2, 4, 8 for fan 1/2/3 -and 1, 2, 4, 8, 16, 32, 64 or 128 for fan 4/5) to give the readings more -range or accuracy. +readings can be divided by a programmable divider (1, 2, 4, 8, 16, +32, 64 or 128 for all fans) to give the readings more range or accuracy. Voltage sensors (also known as IN sensors) report their values in millivolts. An alarm is triggered if the voltage has crossed a programmable minimum diff --git a/Documentation/i2c/upgrading-clients b/Documentation/i2c/upgrading-clients new file mode 100644 index 0000000000000000000000000000000000000000..9a45f9bb6a255d421bd2903e69120c0a8e281017 --- /dev/null +++ b/Documentation/i2c/upgrading-clients @@ -0,0 +1,281 @@ +Upgrading I2C Drivers to the new 2.6 Driver Model +================================================= + +Ben Dooks + +Introduction +------------ + +This guide outlines how to alter existing Linux 2.6 client drivers from +the old to the new new binding methods. + + +Example old-style driver +------------------------ + + +struct example_state { + struct i2c_client client; + .... +}; + +static struct i2c_driver example_driver; + +static unsigned short ignore[] = { I2C_CLIENT_END }; +static unsigned short normal_addr[] = { OUR_ADDR, I2C_CLIENT_END }; + +I2C_CLIENT_INSMOD; + +static int example_attach(struct i2c_adapter *adap, int addr, int kind) +{ + struct example_state *state; + struct device *dev = &adap->dev; /* to use for dev_ reports */ + int ret; + + state = kzalloc(sizeof(struct example_state), GFP_KERNEL); + if (state == NULL) { + dev_err(dev, "failed to create our state\n"); + return -ENOMEM; + } + + example->client.addr = addr; + example->client.flags = 0; + example->client.adapter = adap; + + i2c_set_clientdata(&state->i2c_client, state); + strlcpy(client->i2c_client.name, "example", I2C_NAME_SIZE); + + ret = i2c_attach_client(&state->i2c_client); + if (ret < 0) { + dev_err(dev, "failed to attach client\n"); + kfree(state); + return ret; + } + + dev = &state->i2c_client.dev; + + /* rest of the initialisation goes here. */ + + dev_info(dev, "example client created\n"); + + return 0; +} + +static int __devexit example_detach(struct i2c_client *client) +{ + struct example_state *state = i2c_get_clientdata(client); + + i2c_detach_client(client); + kfree(state); + return 0; +} + +static int example_attach_adapter(struct i2c_adapter *adap) +{ + return i2c_probe(adap, &addr_data, example_attach); +} + +static struct i2c_driver example_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "example", + }, + .attach_adapter = example_attach_adapter, + .detach_client = __devexit_p(example_detach), + .suspend = example_suspend, + .resume = example_resume, +}; + + +Updating the client +------------------- + +The new style binding model will check against a list of supported +devices and their associated address supplied by the code registering +the busses. This means that the driver .attach_adapter and +.detach_adapter methods can be removed, along with the addr_data, +as follows: + +- static struct i2c_driver example_driver; + +- static unsigned short ignore[] = { I2C_CLIENT_END }; +- static unsigned short normal_addr[] = { OUR_ADDR, I2C_CLIENT_END }; + +- I2C_CLIENT_INSMOD; + +- static int example_attach_adapter(struct i2c_adapter *adap) +- { +- return i2c_probe(adap, &addr_data, example_attach); +- } + + static struct i2c_driver example_driver = { +- .attach_adapter = example_attach_adapter, +- .detach_client = __devexit_p(example_detach), + } + +Add the probe and remove methods to the i2c_driver, as so: + + static struct i2c_driver example_driver = { ++ .probe = example_probe, ++ .remove = __devexit_p(example_remove), + } + +Change the example_attach method to accept the new parameters +which include the i2c_client that it will be working with: + +- static int example_attach(struct i2c_adapter *adap, int addr, int kind) ++ static int example_probe(struct i2c_client *client, ++ const struct i2c_device_id *id) + +Change the name of example_attach to example_probe to align it with the +i2c_driver entry names. The rest of the probe routine will now need to be +changed as the i2c_client has already been setup for use. + +The necessary client fields have already been setup before +the probe function is called, so the following client setup +can be removed: + +- example->client.addr = addr; +- example->client.flags = 0; +- example->client.adapter = adap; +- +- strlcpy(client->i2c_client.name, "example", I2C_NAME_SIZE); + +The i2c_set_clientdata is now: + +- i2c_set_clientdata(&state->client, state); ++ i2c_set_clientdata(client, state); + +The call to i2c_attach_client is no longer needed, if the probe +routine exits successfully, then the driver will be automatically +attached by the core. Change the probe routine as so: + +- ret = i2c_attach_client(&state->i2c_client); +- if (ret < 0) { +- dev_err(dev, "failed to attach client\n"); +- kfree(state); +- return ret; +- } + + +Remove the storage of 'struct i2c_client' from the 'struct example_state' +as we are provided with the i2c_client in our example_probe. Instead we +store a pointer to it for when it is needed. + +struct example_state { +- struct i2c_client client; ++ struct i2c_client *client; + +the new i2c client as so: + +- struct device *dev = &adap->dev; /* to use for dev_ reports */ ++ struct device *dev = &i2c_client->dev; /* to use for dev_ reports */ + +And remove the change after our client is attached, as the driver no +longer needs to register a new client structure with the core: + +- dev = &state->i2c_client.dev; + +In the probe routine, ensure that the new state has the client stored +in it: + +static int example_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) +{ + struct example_state *state; + struct device *dev = &i2c_client->dev; + int ret; + + state = kzalloc(sizeof(struct example_state), GFP_KERNEL); + if (state == NULL) { + dev_err(dev, "failed to create our state\n"); + return -ENOMEM; + } + ++ state->client = i2c_client; + +Update the detach method, by changing the name to _remove and +to delete the i2c_detach_client call. It is possible that you +can also remove the ret variable as it is not not needed for +any of the core functions. + +- static int __devexit example_detach(struct i2c_client *client) ++ static int __devexit example_remove(struct i2c_client *client) +{ + struct example_state *state = i2c_get_clientdata(client); + +- i2c_detach_client(client); + +And finally ensure that we have the correct ID table for the i2c-core +and other utilities: + ++ struct i2c_device_id example_idtable[] = { ++ { "example", 0 }, ++ { } ++}; ++ ++MODULE_DEVICE_TABLE(i2c, example_idtable); + +static struct i2c_driver example_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "example", + }, ++ .id_table = example_ids, + + +Our driver should now look like this: + +struct example_state { + struct i2c_client *client; + .... +}; + +static int example_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct example_state *state; + struct device *dev = &client->dev; + + state = kzalloc(sizeof(struct example_state), GFP_KERNEL); + if (state == NULL) { + dev_err(dev, "failed to create our state\n"); + return -ENOMEM; + } + + state->client = client; + i2c_set_clientdata(client, state); + + /* rest of the initialisation goes here. */ + + dev_info(dev, "example client created\n"); + + return 0; +} + +static int __devexit example_remove(struct i2c_client *client) +{ + struct example_state *state = i2c_get_clientdata(client); + + kfree(state); + return 0; +} + +static struct i2c_device_id example_idtable[] = { + { "example", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, example_idtable); + +static struct i2c_driver example_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "example", + }, + .id_table = example_idtable, + .probe = example_probe, + .remove = __devexit_p(example_remove), + .suspend = example_suspend, + .resume = example_resume, +}; diff --git a/Documentation/ia64/Makefile b/Documentation/ia64/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..b75db69ec483ade17893c46076e2b64cffcedb96 --- /dev/null +++ b/Documentation/ia64/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := aliasing-test + +# Tell kbuild to always build the programs +always := $(hostprogs-y) diff --git a/Documentation/ia64/kvm.txt b/Documentation/ia64/kvm.txt index bec9d815da33a0495c7ea4d2eebecf7f4c1ab2fc..914d07f49268b728ab5c1d8a6e7b23b59cef0128 100644 --- a/Documentation/ia64/kvm.txt +++ b/Documentation/ia64/kvm.txt @@ -50,9 +50,9 @@ Note: For step 2, please make sure that host page size == TARGET_PAGE_SIZE of qe /usr/local/bin/qemu-system-ia64 -smp xx -m 512 -hda $your_image (xx is the number of virtual processors for the guest, now the maximum value is 4) -5. Known possibile issue on some platforms with old Firmware. +5. Known possible issue on some platforms with old Firmware. -If meet strange host crashe issues, try to solve it through either of the following ways: +In the event of strange host crash issues, try to solve it through either of the following ways: (1): Upgrade your Firmware to the latest one. @@ -65,8 +65,8 @@ index 0b53344..f02b0f7 100644 mov ar.pfs = loc1 mov rp = loc0 ;; -- srlz.d // seralize restoration of psr.l -+ srlz.i // seralize restoration of psr.l +- srlz.d // serialize restoration of psr.l ++ srlz.i // serialize restoration of psr.l + ;; br.ret.sptk.many b0 END(ia64_pal_call_static) diff --git a/Documentation/input/cs461x.txt b/Documentation/input/cs461x.txt index afe0d6543e093fa5dfa4758bbb0cbec90ff0bce3..202e9dbacec39a96990c5722c4b1ab832b939b61 100644 --- a/Documentation/input/cs461x.txt +++ b/Documentation/input/cs461x.txt @@ -31,7 +31,7 @@ The driver works with ALSA drivers simultaneously. For example, the xracer uses joystick as input device and PCM device as sound output in one time. There are no sound or input collisions detected. The source code have comments about them; but I've found the joystick can be initialized -separately of ALSA modules. So, you canm use only one joystick driver +separately of ALSA modules. So, you can use only one joystick driver without ALSA drivers. The ALSA drivers are not needed to compile or run this driver. diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt index 3bb5f466a90db3e971b42fb26c60d716a30878ed..1c6b545635a27741abe8f3b5bb10490416bce0fa 100644 --- a/Documentation/ioctl-number.txt +++ b/Documentation/ioctl-number.txt @@ -105,7 +105,6 @@ Code Seq# Include File Comments 'T' all linux/soundcard.h conflict! 'T' all asm-i386/ioctls.h conflict! 'U' 00-EF linux/drivers/usb/usb.h -'U' F0-FF drivers/usb/auerswald.c 'V' all linux/vt.h 'W' 00-1F linux/watchdog.h conflict! 'W' 00-1F linux/wanrouter.h conflict! diff --git a/Documentation/ioctl/ioctl-decoding.txt b/Documentation/ioctl/ioctl-decoding.txt index bfdf7f3ee4f05e0f52e08c8aee1ad55c248b8af4..e35efb0cec2e64a99538d24c2c7c7b38846abc26 100644 --- a/Documentation/ioctl/ioctl-decoding.txt +++ b/Documentation/ioctl/ioctl-decoding.txt @@ -1,6 +1,6 @@ To decode a hex IOCTL code: -Most architecures use this generic format, but check +Most architectures use this generic format, but check include/ARCH/ioctl.h for specifics, e.g. powerpc uses 3 bits to encode read/write and 13 bits for size. @@ -18,7 +18,7 @@ uses 3 bits to encode read/write and 13 bits for size. 7-0 function # - So for example 0x82187201 is a read with arg length of 0x218, +So for example 0x82187201 is a read with arg length of 0x218, character 'r' function 1. Grepping the source reveals this is: #define VFAT_IOCTL_READDIR_BOTH _IOR('r', 1, struct dirent [2]) diff --git a/Documentation/iostats.txt b/Documentation/iostats.txt index 5925c3cd030d55884b3f962ed40ced5a20709cf4..59a69ec67c408a54ee724df4d4a64a69a8317f68 100644 --- a/Documentation/iostats.txt +++ b/Documentation/iostats.txt @@ -143,7 +143,7 @@ disk and partition statistics are consistent again. Since we still don't keep record of the partition-relative address, an operation is attributed to the partition which contains the first sector of the request after the eventual merges. As requests can be merged across partition, this could lead -to some (probably insignificant) innacuracy. +to some (probably insignificant) inaccuracy. Additional notes ---------------- diff --git a/Documentation/isdn/README.mISDN b/Documentation/isdn/README.mISDN new file mode 100644 index 0000000000000000000000000000000000000000..cd8bf920e77bcac0ec8d4068db18441bd28083d5 --- /dev/null +++ b/Documentation/isdn/README.mISDN @@ -0,0 +1,6 @@ +mISDN is a new modular ISDN driver, in the long term it should replace +the old I4L driver architecture for passiv ISDN cards. +It was designed to allow a broad range of applications and interfaces +but only have the basic function in kernel, the interface to the user +space is based on sockets with a own address family AF_ISDN. + diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt index 9691c7f5166c1ea60acfbc383799dc5ec4dcbd21..0705040531a534c2c153c1289fe0febf92926a61 100644 --- a/Documentation/kdump/kdump.txt +++ b/Documentation/kdump/kdump.txt @@ -65,26 +65,26 @@ Install kexec-tools 2) Download the kexec-tools user-space package from the following URL: -http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-tools-testing.tar.gz +http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-tools.tar.gz -This is a symlink to the latest version, which at the time of writing is -20061214, the only release of kexec-tools-testing so far. As other versions -are released, the older ones will remain available at -http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/ +This is a symlink to the latest version. -Note: Latest kexec-tools-testing git tree is available at +The latest kexec-tools git tree is available at: -git://git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools-testing.git +git://git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools.git or -http://www.kernel.org/git/?p=linux/kernel/git/horms/kexec-tools-testing.git;a=summary +http://www.kernel.org/git/?p=linux/kernel/git/horms/kexec-tools.git + +More information about kexec-tools can be found at +http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/README.html 3) Unpack the tarball with the tar command, as follows: - tar xvpzf kexec-tools-testing.tar.gz + tar xvpzf kexec-tools.tar.gz 4) Change to the kexec-tools directory, as follows: - cd kexec-tools-testing-VERSION + cd kexec-tools-VERSION 5) Configure the package, as follows: diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 30d44b78171a53e5dcc9e3b42d67266f61975a75..e7bea3e853044e54f3ee863ad3d295b0df84a522 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -87,7 +87,8 @@ parameter is applicable: SH SuperH architecture is enabled. SMP The kernel is an SMP kernel. SPARC Sparc architecture is enabled. - SWSUSP Software suspend is enabled. + SWSUSP Software suspend (hibernation) is enabled. + SUSPEND System suspend states are enabled. TS Appropriate touchscreen support is enabled. USB USB support is enabled. USBHID USB Human Interface Device support is enabled. @@ -147,10 +148,12 @@ and is between 256 and 4096 characters. It is defined in the file default: 0 acpi_sleep= [HW,ACPI] Sleep options - Format: { s3_bios, s3_mode, s3_beep, old_ordering } + Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, old_ordering } See Documentation/power/video.txt for s3_bios and s3_mode. s3_beep is for debugging; it makes the PC's speaker beep as soon as the kernel's real-mode entry point is called. + s4_nohwsig prevents ACPI hardware signature from being + used during resume from hibernation. old_ordering causes the ACPI 1.0 ordering of the _PTS control method, wrt putting devices into low power states, to be enforced (the ACPI 2.0 ordering of _PTS is @@ -774,8 +777,22 @@ and is between 256 and 4096 characters. It is defined in the file hisax= [HW,ISDN] See Documentation/isdn/README.HiSax. - hugepages= [HW,X86-32,IA-64] Maximal number of HugeTLB pages. - hugepagesz= [HW,IA-64,PPC] The size of the HugeTLB pages. + hugepages= [HW,X86-32,IA-64] HugeTLB pages to allocate at boot. + hugepagesz= [HW,IA-64,PPC,X86-64] The size of the HugeTLB pages. + On x86-64 and powerpc, this option can be specified + multiple times interleaved with hugepages= to reserve + huge pages of different sizes. Valid pages sizes on + x86-64 are 2M (when the CPU supports "pse") and 1G + (when the CPU supports the "pdpe1gb" cpuinfo flag) + Note that 1GB pages can only be allocated at boot time + using hugepages= and not freed afterwards. + default_hugepagesz= + [same as hugepagesz=] The size of the default + HugeTLB page size. This is the size represented by + the legacy /proc/ hugepages APIs, used for SHM, and + default size when mounting hugetlbfs filesystems. + Defaults to the default architecture's huge page size + if not specified. i8042.direct [HW] Put keyboard port into non-translated mode i8042.dumbkbd [HW] Pretend that controller can only read data from @@ -1225,6 +1242,14 @@ and is between 256 and 4096 characters. It is defined in the file mga= [HW,DRM] + mminit_loglevel= + [KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this + parameter allows control of the logging verbosity for + the additional memory initialisation checks. A value + of 0 disables mminit logging and a level of 4 will + log everything. Information is printed at KERN_DEBUG + so loglevel=8 may also need to be specified. + mousedev.tap_time= [MOUSE] Maximum time between finger touching and leaving touchpad surface for touch to be considered @@ -2034,6 +2059,9 @@ and is between 256 and 4096 characters. It is defined in the file snd-ymfpci= [HW,ALSA] + softlockup_panic= + [KNL] Should the soft-lockup detector generate panics. + sonypi.*= [HW] Sony Programmable I/O Control Device driver See Documentation/sonypi.txt @@ -2098,6 +2126,12 @@ and is between 256 and 4096 characters. It is defined in the file tdfx= [HW,DRM] + test_suspend= [SUSPEND] + Specify "mem" (for Suspend-to-RAM) or "standby" (for + standby suspend) as the system sleep state to briefly + enter during system startup. The system is woken from + this state using a wakeup-capable RTC alarm. + thash_entries= [KNL,NET] Set number of hash buckets for TCP connection @@ -2125,13 +2159,6 @@ and is between 256 and 4096 characters. It is defined in the file : poll all this frequency 0: no polling (default) - tipar.timeout= [HW,PPT] - Set communications timeout in tenths of a second - (default 15). - - tipar.delay= [HW,PPT] - Set inter-bit delay in microseconds (default 10). - tmscsim= [HW,SCSI] See comment before function dc390_setup() in drivers/scsi/tmscsim.c. diff --git a/Documentation/keys.txt b/Documentation/keys.txt index d5c7a57d17007fa0f43558b270b0e4c302d5f8aa..b56aacc1fff864022dbdf67aac997d54f0d14f32 100644 --- a/Documentation/keys.txt +++ b/Documentation/keys.txt @@ -864,7 +864,7 @@ payload contents" for more information. request_key_with_auxdata() respectively. These two functions return with the key potentially still under - construction. To wait for contruction completion, the following should be + construction. To wait for construction completion, the following should be called: int wait_for_key_construction(struct key *key, bool intr); diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 64b3f146e4b09aa4d2cd312e97689f9eba503347..02dc748b76c4ac861549077392ef1deb3ca9c652 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.20 - April 09th, 2008 + Version 0.21 + May 29th, 2008 Borislav Deianov Henrique de Moraes Holschuh @@ -621,7 +621,8 @@ Bluetooth --------- procfs: /proc/acpi/ibm/bluetooth -sysfs device attribute: bluetooth_enable +sysfs device attribute: bluetooth_enable (deprecated) +sysfs rfkill class: switch "tpacpi_bluetooth_sw" This feature shows the presence and current state of a ThinkPad Bluetooth device in the internal ThinkPad CDC slot. @@ -643,8 +644,12 @@ Sysfs notes: 0: disables Bluetooth / Bluetooth is disabled 1: enables Bluetooth / Bluetooth is enabled. - Note: this interface will be probably be superseded by the - generic rfkill class, so it is NOT to be considered stable yet. + Note: this interface has been superseded by the generic rfkill + class. It has been deprecated, and it will be removed in year + 2010. + + rfkill controller switch "tpacpi_bluetooth_sw": refer to + Documentation/rfkill.txt for details. Video output control -- /proc/acpi/ibm/video -------------------------------------------- @@ -1374,7 +1379,8 @@ EXPERIMENTAL: WAN ----------------- procfs: /proc/acpi/ibm/wan -sysfs device attribute: wwan_enable +sysfs device attribute: wwan_enable (deprecated) +sysfs rfkill class: switch "tpacpi_wwan_sw" This feature is marked EXPERIMENTAL because the implementation directly accesses hardware registers and may not work as expected. USE @@ -1404,8 +1410,12 @@ Sysfs notes: 0: disables WWAN card / WWAN card is disabled 1: enables WWAN card / WWAN card is enabled. - Note: this interface will be probably be superseded by the - generic rfkill class, so it is NOT to be considered stable yet. + Note: this interface has been superseded by the generic rfkill + class. It has been deprecated, and it will be removed in year + 2010. + + rfkill controller switch "tpacpi_wwan_sw": refer to + Documentation/rfkill.txt for details. Multiple Commands, Module Parameters ------------------------------------ diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt index 18860ad9935a7876746c00660f36b9fd90529499..6399557cdab3d6542a0feea0c0cd2c6b2af5ffad 100644 --- a/Documentation/leds-class.txt +++ b/Documentation/leds-class.txt @@ -59,7 +59,7 @@ Hardware accelerated blink of LEDs Some LEDs can be programmed to blink without any CPU interaction. To support this feature, a LED driver can optionally implement the -blink_set() function (see ). If implemeted, triggers can +blink_set() function (see ). If implemented, triggers can attempt to use it before falling back to software timers. The blink_set() function should return 0 if the blink setting is supported, or -EINVAL otherwise, which means that LED blinking will be handled by software. diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 82fafe0429fed8dc441411059be52b33154dd8a8..655414821edc361fae2382104a068bb2c895f0de 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -36,11 +36,13 @@ #include #include #include +#include #include "linux/lguest_launcher.h" #include "linux/virtio_config.h" #include "linux/virtio_net.h" #include "linux/virtio_blk.h" #include "linux/virtio_console.h" +#include "linux/virtio_rng.h" #include "linux/virtio_ring.h" #include "asm-x86/bootparam.h" /*L:110 We can ignore the 39 include files we need for this program, but I do @@ -64,8 +66,8 @@ typedef uint8_t u8; #endif /* We can have up to 256 pages for devices. */ #define DEVICE_PAGES 256 -/* This will occupy 2 pages: it must be a power of 2. */ -#define VIRTQUEUE_NUM 128 +/* This will occupy 3 pages: it must be a power of 2. */ +#define VIRTQUEUE_NUM 256 /*L:120 verbose is both a global flag and a macro. The C preprocessor allows * this, and although I wouldn't recommend it, it works quite nicely here. */ @@ -74,12 +76,19 @@ static bool verbose; do { if (verbose) printf(args); } while(0) /*:*/ -/* The pipe to send commands to the waker process */ -static int waker_fd; +/* File descriptors for the Waker. */ +struct { + int pipe[2]; + int lguest_fd; +} waker_fds; + /* The pointer to the start of guest memory. */ static void *guest_base; /* The maximum guest physical address allowed, and maximum possible. */ static unsigned long guest_limit, guest_max; +/* The pipe for signal hander to write to. */ +static int timeoutpipe[2]; +static unsigned int timeout_usec = 500; /* a per-cpu variable indicating whose vcpu is currently running */ static unsigned int __thread cpu_id; @@ -155,11 +164,14 @@ struct virtqueue /* Last available index we saw. */ u16 last_avail_idx; - /* The routine to call when the Guest pings us. */ - void (*handle_output)(int fd, struct virtqueue *me); + /* The routine to call when the Guest pings us, or timeout. */ + void (*handle_output)(int fd, struct virtqueue *me, bool timeout); /* Outstanding buffers */ unsigned int inflight; + + /* Is this blocked awaiting a timer? */ + bool blocked; }; /* Remember the arguments to the program so we can "reboot" */ @@ -190,6 +202,9 @@ static void *_convert(struct iovec *iov, size_t size, size_t align, return iov->iov_base; } +/* Wrapper for the last available index. Makes it easier to change. */ +#define lg_last_avail(vq) ((vq)->last_avail_idx) + /* The virtio configuration space is defined to be little-endian. x86 is * little-endian too, but it's nice to be explicit so we have these helpers. */ #define cpu_to_le16(v16) (v16) @@ -199,6 +214,33 @@ static void *_convert(struct iovec *iov, size_t size, size_t align, #define le32_to_cpu(v32) (v32) #define le64_to_cpu(v64) (v64) +/* Is this iovec empty? */ +static bool iov_empty(const struct iovec iov[], unsigned int num_iov) +{ + unsigned int i; + + for (i = 0; i < num_iov; i++) + if (iov[i].iov_len) + return false; + return true; +} + +/* Take len bytes from the front of this iovec. */ +static void iov_consume(struct iovec iov[], unsigned num_iov, unsigned len) +{ + unsigned int i; + + for (i = 0; i < num_iov; i++) { + unsigned int used; + + used = iov[i].iov_len < len ? iov[i].iov_len : len; + iov[i].iov_base += used; + iov[i].iov_len -= used; + len -= used; + } + assert(len == 0); +} + /* The device virtqueue descriptors are followed by feature bitmasks. */ static u8 *get_feature_bits(struct device *dev) { @@ -254,6 +296,7 @@ static void *map_zeroed_pages(unsigned int num) PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0); if (addr == MAP_FAILED) err(1, "Mmaping %u pages of /dev/zero", num); + close(fd); return addr; } @@ -540,69 +583,64 @@ static void add_device_fd(int fd) * watch, but handing a file descriptor mask through to the kernel is fairly * icky. * - * Instead, we fork off a process which watches the file descriptors and writes + * Instead, we clone off a thread which watches the file descriptors and writes * the LHREQ_BREAK command to the /dev/lguest file descriptor to tell the Host * stop running the Guest. This causes the Launcher to return from the * /dev/lguest read with -EAGAIN, where it will write to /dev/lguest to reset * the LHREQ_BREAK and wake us up again. * * This, of course, is merely a different *kind* of icky. + * + * Given my well-known antipathy to threads, I'd prefer to use processes. But + * it's easier to share Guest memory with threads, and trivial to share the + * devices.infds as the Launcher changes it. */ -static void wake_parent(int pipefd, int lguest_fd) +static int waker(void *unused) { - /* Add the pipe from the Launcher to the fdset in the device_list, so - * we watch it, too. */ - add_device_fd(pipefd); + /* Close the write end of the pipe: only the Launcher has it open. */ + close(waker_fds.pipe[1]); for (;;) { fd_set rfds = devices.infds; unsigned long args[] = { LHREQ_BREAK, 1 }; + unsigned int maxfd = devices.max_infd; + + /* We also listen to the pipe from the Launcher. */ + FD_SET(waker_fds.pipe[0], &rfds); + if (waker_fds.pipe[0] > maxfd) + maxfd = waker_fds.pipe[0]; /* Wait until input is ready from one of the devices. */ - select(devices.max_infd+1, &rfds, NULL, NULL, NULL); - /* Is it a message from the Launcher? */ - if (FD_ISSET(pipefd, &rfds)) { - int fd; - /* If read() returns 0, it means the Launcher has - * exited. We silently follow. */ - if (read(pipefd, &fd, sizeof(fd)) == 0) - exit(0); - /* Otherwise it's telling us to change what file - * descriptors we're to listen to. Positive means - * listen to a new one, negative means stop - * listening. */ - if (fd >= 0) - FD_SET(fd, &devices.infds); - else - FD_CLR(-fd - 1, &devices.infds); - } else /* Send LHREQ_BREAK command. */ - pwrite(lguest_fd, args, sizeof(args), cpu_id); + select(maxfd+1, &rfds, NULL, NULL, NULL); + + /* Message from Launcher? */ + if (FD_ISSET(waker_fds.pipe[0], &rfds)) { + char c; + /* If this fails, then assume Launcher has exited. + * Don't do anything on exit: we're just a thread! */ + if (read(waker_fds.pipe[0], &c, 1) != 1) + _exit(0); + continue; + } + + /* Send LHREQ_BREAK command to snap the Launcher out of it. */ + pwrite(waker_fds.lguest_fd, args, sizeof(args), cpu_id); } + return 0; } /* This routine just sets up a pipe to the Waker process. */ -static int setup_waker(int lguest_fd) -{ - int pipefd[2], child; - - /* We create a pipe to talk to the Waker, and also so it knows when the - * Launcher dies (and closes pipe). */ - pipe(pipefd); - child = fork(); - if (child == -1) - err(1, "forking"); - - if (child == 0) { - /* We are the Waker: close the "writing" end of our copy of the - * pipe and start waiting for input. */ - close(pipefd[1]); - wake_parent(pipefd[0], lguest_fd); - } - /* Close the reading end of our copy of the pipe. */ - close(pipefd[0]); +static void setup_waker(int lguest_fd) +{ + /* This pipe is closed when Launcher dies, telling Waker. */ + if (pipe(waker_fds.pipe) != 0) + err(1, "Creating pipe for Waker"); + + /* Waker also needs to know the lguest fd */ + waker_fds.lguest_fd = lguest_fd; - /* Here is the fd used to talk to the waker. */ - return pipefd[1]; + if (clone(waker, malloc(4096) + 4096, CLONE_VM | SIGCHLD, NULL) == -1) + err(1, "Creating Waker"); } /* @@ -661,19 +699,22 @@ static unsigned get_vq_desc(struct virtqueue *vq, unsigned int *out_num, unsigned int *in_num) { unsigned int i, head; + u16 last_avail; /* Check it isn't doing very strange things with descriptor numbers. */ - if ((u16)(vq->vring.avail->idx - vq->last_avail_idx) > vq->vring.num) + last_avail = lg_last_avail(vq); + if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num) errx(1, "Guest moved used index from %u to %u", - vq->last_avail_idx, vq->vring.avail->idx); + last_avail, vq->vring.avail->idx); /* If there's nothing new since last we looked, return invalid. */ - if (vq->vring.avail->idx == vq->last_avail_idx) + if (vq->vring.avail->idx == last_avail) return vq->vring.num; /* Grab the next descriptor number they're advertising, and increment * the index we've seen. */ - head = vq->vring.avail->ring[vq->last_avail_idx++ % vq->vring.num]; + head = vq->vring.avail->ring[last_avail % vq->vring.num]; + lg_last_avail(vq)++; /* If their number is silly, that's a fatal mistake. */ if (head >= vq->vring.num) @@ -821,8 +862,8 @@ static bool handle_console_input(int fd, struct device *dev) unsigned long args[] = { LHREQ_BREAK, 0 }; /* Close the fd so Waker will know it has to * exit. */ - close(waker_fd); - /* Just in case waker is blocked in BREAK, send + close(waker_fds.pipe[1]); + /* Just in case Waker is blocked in BREAK, send * unbreak now. */ write(fd, args, sizeof(args)); exit(2); @@ -839,7 +880,7 @@ static bool handle_console_input(int fd, struct device *dev) /* Handling output for console is simple: we just get all the output buffers * and write them to stdout. */ -static void handle_console_output(int fd, struct virtqueue *vq) +static void handle_console_output(int fd, struct virtqueue *vq, bool timeout) { unsigned int head, out, in; int len; @@ -854,6 +895,21 @@ static void handle_console_output(int fd, struct virtqueue *vq) } } +static void block_vq(struct virtqueue *vq) +{ + struct itimerval itm; + + vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY; + vq->blocked = true; + + itm.it_interval.tv_sec = 0; + itm.it_interval.tv_usec = 0; + itm.it_value.tv_sec = 0; + itm.it_value.tv_usec = timeout_usec; + + setitimer(ITIMER_REAL, &itm, NULL); +} + /* * The Network * @@ -861,22 +917,34 @@ static void handle_console_output(int fd, struct virtqueue *vq) * and write them (ignoring the first element) to this device's file descriptor * (/dev/net/tun). */ -static void handle_net_output(int fd, struct virtqueue *vq) +static void handle_net_output(int fd, struct virtqueue *vq, bool timeout) { - unsigned int head, out, in; + unsigned int head, out, in, num = 0; int len; struct iovec iov[vq->vring.num]; + static int last_timeout_num; /* Keep getting output buffers from the Guest until we run out. */ while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) { if (in) errx(1, "Input buffers in output queue?"); - /* Check header, but otherwise ignore it (we told the Guest we - * supported no features, so it shouldn't have anything - * interesting). */ - (void)convert(&iov[0], struct virtio_net_hdr); - len = writev(vq->dev->fd, iov+1, out-1); + len = writev(vq->dev->fd, iov, out); + if (len < 0) + err(1, "Writing network packet to tun"); add_used_and_trigger(fd, vq, head, len); + num++; + } + + /* Block further kicks and set up a timer if we saw anything. */ + if (!timeout && num) + block_vq(vq); + + if (timeout) { + if (num < last_timeout_num) + timeout_usec += 10; + else if (timeout_usec > 1) + timeout_usec--; + last_timeout_num = num; } } @@ -887,7 +955,6 @@ static bool handle_tun_input(int fd, struct device *dev) unsigned int head, in_num, out_num; int len; struct iovec iov[dev->vq->vring.num]; - struct virtio_net_hdr *hdr; /* First we need a network buffer from the Guests's recv virtqueue. */ head = get_vq_desc(dev->vq, iov, &out_num, &in_num); @@ -896,25 +963,23 @@ static bool handle_tun_input(int fd, struct device *dev) * early, the Guest won't be ready yet. Wait until the device * status says it's ready. */ /* FIXME: Actually want DRIVER_ACTIVE here. */ - if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK) - warn("network: no dma buffer!"); + + /* Now tell it we want to know if new things appear. */ + dev->vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY; + wmb(); + /* We'll turn this back on if input buffers are registered. */ return false; } else if (out_num) errx(1, "Output buffers in network recv queue?"); - /* First element is the header: we set it to 0 (no features). */ - hdr = convert(&iov[0], struct virtio_net_hdr); - hdr->flags = 0; - hdr->gso_type = VIRTIO_NET_HDR_GSO_NONE; - /* Read the packet from the device directly into the Guest's buffer. */ - len = readv(dev->fd, iov+1, in_num-1); + len = readv(dev->fd, iov, in_num); if (len <= 0) err(1, "reading network"); /* Tell the Guest about the new packet. */ - add_used_and_trigger(fd, dev->vq, head, sizeof(*hdr) + len); + add_used_and_trigger(fd, dev->vq, head, len); verbose("tun input packet len %i [%02x %02x] (%s)\n", len, ((u8 *)iov[1].iov_base)[0], ((u8 *)iov[1].iov_base)[1], @@ -927,11 +992,18 @@ static bool handle_tun_input(int fd, struct device *dev) /*L:215 This is the callback attached to the network and console input * virtqueues: it ensures we try again, in case we stopped console or net * delivery because Guest didn't have any buffers. */ -static void enable_fd(int fd, struct virtqueue *vq) +static void enable_fd(int fd, struct virtqueue *vq, bool timeout) { add_device_fd(vq->dev->fd); - /* Tell waker to listen to it again */ - write(waker_fd, &vq->dev->fd, sizeof(vq->dev->fd)); + /* Snap the Waker out of its select loop. */ + write(waker_fds.pipe[1], "", 1); +} + +static void net_enable_fd(int fd, struct virtqueue *vq, bool timeout) +{ + /* We don't need to know again when Guest refills receive buffer. */ + vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY; + enable_fd(fd, vq, timeout); } /* When the Guest tells us they updated the status field, we handle it. */ @@ -951,7 +1023,7 @@ static void update_device_status(struct device *dev) for (vq = dev->vq; vq; vq = vq->next) { memset(vq->vring.desc, 0, vring_size(vq->config.num, getpagesize())); - vq->last_avail_idx = 0; + lg_last_avail(vq) = 0; } } else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) { warnx("Device %s configuration FAILED", dev->name); @@ -960,10 +1032,10 @@ static void update_device_status(struct device *dev) verbose("Device %s OK: offered", dev->name); for (i = 0; i < dev->desc->feature_len; i++) - verbose(" %08x", get_feature_bits(dev)[i]); + verbose(" %02x", get_feature_bits(dev)[i]); verbose(", accepted"); for (i = 0; i < dev->desc->feature_len; i++) - verbose(" %08x", get_feature_bits(dev) + verbose(" %02x", get_feature_bits(dev) [dev->desc->feature_len+i]); if (dev->ready) @@ -1000,7 +1072,7 @@ static void handle_output(int fd, unsigned long addr) if (strcmp(vq->dev->name, "console") != 0) verbose("Output to %s\n", vq->dev->name); if (vq->handle_output) - vq->handle_output(fd, vq); + vq->handle_output(fd, vq, false); return; } } @@ -1014,6 +1086,29 @@ static void handle_output(int fd, unsigned long addr) strnlen(from_guest_phys(addr), guest_limit - addr)); } +static void handle_timeout(int fd) +{ + char buf[32]; + struct device *i; + struct virtqueue *vq; + + /* Clear the pipe */ + read(timeoutpipe[0], buf, sizeof(buf)); + + /* Check each device and virtqueue: flush blocked ones. */ + for (i = devices.dev; i; i = i->next) { + for (vq = i->vq; vq; vq = vq->next) { + if (!vq->blocked) + continue; + + vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY; + vq->blocked = false; + if (vq->handle_output) + vq->handle_output(fd, vq, true); + } + } +} + /* This is called when the Waker wakes us up: check for incoming file * descriptors. */ static void handle_input(int fd) @@ -1024,16 +1119,20 @@ static void handle_input(int fd) for (;;) { struct device *i; fd_set fds = devices.infds; + int num; + num = select(devices.max_infd+1, &fds, NULL, NULL, &poll); + /* Could get interrupted */ + if (num < 0) + continue; /* If nothing is ready, we're done. */ - if (select(devices.max_infd+1, &fds, NULL, NULL, &poll) == 0) + if (num == 0) break; /* Otherwise, call the device(s) which have readable file * descriptors and a method of handling them. */ for (i = devices.dev; i; i = i->next) { if (i->handle_input && FD_ISSET(i->fd, &fds)) { - int dev_fd; if (i->handle_input(fd, i)) continue; @@ -1043,13 +1142,12 @@ static void handle_input(int fd) * buffers to deliver into. Console also uses * it when it discovers that stdin is closed. */ FD_CLR(i->fd, &devices.infds); - /* Tell waker to ignore it too, by sending a - * negative fd number (-1, since 0 is a valid - * FD number). */ - dev_fd = -i->fd - 1; - write(waker_fd, &dev_fd, sizeof(dev_fd)); } } + + /* Is this the timeout fd? */ + if (FD_ISSET(timeoutpipe[0], &fds)) + handle_timeout(fd); } } @@ -1098,7 +1196,7 @@ static struct lguest_device_desc *new_dev_desc(u16 type) /* Each device descriptor is followed by the description of its virtqueues. We * specify how many descriptors the virtqueue is to have. */ static void add_virtqueue(struct device *dev, unsigned int num_descs, - void (*handle_output)(int fd, struct virtqueue *me)) + void (*handle_output)(int, struct virtqueue *, bool)) { unsigned int pages; struct virtqueue **i, *vq = malloc(sizeof(*vq)); @@ -1114,6 +1212,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs, vq->last_avail_idx = 0; vq->dev = dev; vq->inflight = 0; + vq->blocked = false; /* Initialize the configuration. */ vq->config.num = num_descs; @@ -1246,6 +1345,24 @@ static void setup_console(void) } /*:*/ +static void timeout_alarm(int sig) +{ + write(timeoutpipe[1], "", 1); +} + +static void setup_timeout(void) +{ + if (pipe(timeoutpipe) != 0) + err(1, "Creating timeout pipe"); + + if (fcntl(timeoutpipe[1], F_SETFL, + fcntl(timeoutpipe[1], F_GETFL) | O_NONBLOCK) != 0) + err(1, "Making timeout pipe nonblocking"); + + add_device_fd(timeoutpipe[0]); + signal(SIGALRM, timeout_alarm); +} + /*M:010 Inter-guest networking is an interesting area. Simplest is to have a * --sharenet= option which opens or creates a named pipe. This can be * used to send packets to another guest in a 1:1 manner. @@ -1264,10 +1381,25 @@ static void setup_console(void) static u32 str2ip(const char *ipaddr) { - unsigned int byte[4]; + unsigned int b[4]; - sscanf(ipaddr, "%u.%u.%u.%u", &byte[0], &byte[1], &byte[2], &byte[3]); - return (byte[0] << 24) | (byte[1] << 16) | (byte[2] << 8) | byte[3]; + if (sscanf(ipaddr, "%u.%u.%u.%u", &b[0], &b[1], &b[2], &b[3]) != 4) + errx(1, "Failed to parse IP address '%s'", ipaddr); + return (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3]; +} + +static void str2mac(const char *macaddr, unsigned char mac[6]) +{ + unsigned int m[6]; + if (sscanf(macaddr, "%02x:%02x:%02x:%02x:%02x:%02x", + &m[0], &m[1], &m[2], &m[3], &m[4], &m[5]) != 6) + errx(1, "Failed to parse mac address '%s'", macaddr); + mac[0] = m[0]; + mac[1] = m[1]; + mac[2] = m[2]; + mac[3] = m[3]; + mac[4] = m[4]; + mac[5] = m[5]; } /* This code is "adapted" from libbridge: it attaches the Host end of the @@ -1288,6 +1420,7 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name) errx(1, "interface %s does not exist!", if_name); strncpy(ifr.ifr_name, br_name, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ-1] = '\0'; ifr.ifr_ifindex = ifidx; if (ioctl(fd, SIOCBRADDIF, &ifr) < 0) err(1, "can't add %s to bridge %s", if_name, br_name); @@ -1296,64 +1429,75 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name) /* This sets up the Host end of the network device with an IP address, brings * it up so packets will flow, the copies the MAC address into the hwaddr * pointer. */ -static void configure_device(int fd, const char *devname, u32 ipaddr, - unsigned char hwaddr[6]) +static void configure_device(int fd, const char *tapif, u32 ipaddr) { struct ifreq ifr; struct sockaddr_in *sin = (struct sockaddr_in *)&ifr.ifr_addr; - /* Don't read these incantations. Just cut & paste them like I did! */ memset(&ifr, 0, sizeof(ifr)); - strcpy(ifr.ifr_name, devname); + strcpy(ifr.ifr_name, tapif); + + /* Don't read these incantations. Just cut & paste them like I did! */ sin->sin_family = AF_INET; sin->sin_addr.s_addr = htonl(ipaddr); if (ioctl(fd, SIOCSIFADDR, &ifr) != 0) - err(1, "Setting %s interface address", devname); + err(1, "Setting %s interface address", tapif); ifr.ifr_flags = IFF_UP; if (ioctl(fd, SIOCSIFFLAGS, &ifr) != 0) - err(1, "Bringing interface %s up", devname); - - /* SIOC stands for Socket I/O Control. G means Get (vs S for Set - * above). IF means Interface, and HWADDR is hardware address. - * Simple! */ - if (ioctl(fd, SIOCGIFHWADDR, &ifr) != 0) - err(1, "getting hw address for %s", devname); - memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, 6); + err(1, "Bringing interface %s up", tapif); } -/*L:195 Our network is a Host<->Guest network. This can either use bridging or - * routing, but the principle is the same: it uses the "tun" device to inject - * packets into the Host as if they came in from a normal network card. We - * just shunt packets between the Guest and the tun device. */ -static void setup_tun_net(const char *arg) +static int get_tun_device(char tapif[IFNAMSIZ]) { - struct device *dev; struct ifreq ifr; - int netfd, ipfd; - u32 ip; - const char *br_name = NULL; - struct virtio_net_config conf; + int netfd; + + /* Start with this zeroed. Messy but sure. */ + memset(&ifr, 0, sizeof(ifr)); /* We open the /dev/net/tun device and tell it we want a tap device. A * tap device is like a tun device, only somehow different. To tell * the truth, I completely blundered my way through this code, but it * works now! */ netfd = open_or_die("/dev/net/tun", O_RDWR); - memset(&ifr, 0, sizeof(ifr)); - ifr.ifr_flags = IFF_TAP | IFF_NO_PI; + ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR; strcpy(ifr.ifr_name, "tap%d"); if (ioctl(netfd, TUNSETIFF, &ifr) != 0) err(1, "configuring /dev/net/tun"); + + if (ioctl(netfd, TUNSETOFFLOAD, + TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0) + err(1, "Could not set features for tun device"); + /* We don't need checksums calculated for packets coming in this * device: trust us! */ ioctl(netfd, TUNSETNOCSUM, 1); + memcpy(tapif, ifr.ifr_name, IFNAMSIZ); + return netfd; +} + +/*L:195 Our network is a Host<->Guest network. This can either use bridging or + * routing, but the principle is the same: it uses the "tun" device to inject + * packets into the Host as if they came in from a normal network card. We + * just shunt packets between the Guest and the tun device. */ +static void setup_tun_net(char *arg) +{ + struct device *dev; + int netfd, ipfd; + u32 ip = INADDR_ANY; + bool bridging = false; + char tapif[IFNAMSIZ], *p; + struct virtio_net_config conf; + + netfd = get_tun_device(tapif); + /* First we create a new network device. */ dev = new_device("net", VIRTIO_ID_NET, netfd, handle_tun_input); /* Network devices need a receive and a send queue, just like * console. */ - add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd); + add_virtqueue(dev, VIRTQUEUE_NUM, net_enable_fd); add_virtqueue(dev, VIRTQUEUE_NUM, handle_net_output); /* We need a socket to perform the magic network ioctls to bring up the @@ -1364,28 +1508,50 @@ static void setup_tun_net(const char *arg) /* If the command line was --tunnet=bridge: do bridging. */ if (!strncmp(BRIDGE_PFX, arg, strlen(BRIDGE_PFX))) { - ip = INADDR_ANY; - br_name = arg + strlen(BRIDGE_PFX); - add_to_bridge(ipfd, ifr.ifr_name, br_name); - } else /* It is an IP address to set up the device with */ + arg += strlen(BRIDGE_PFX); + bridging = true; + } + + /* A mac address may follow the bridge name or IP address */ + p = strchr(arg, ':'); + if (p) { + str2mac(p+1, conf.mac); + add_feature(dev, VIRTIO_NET_F_MAC); + *p = '\0'; + } + + /* arg is now either an IP address or a bridge name */ + if (bridging) + add_to_bridge(ipfd, tapif, arg); + else ip = str2ip(arg); - /* Set up the tun device, and get the mac address for the interface. */ - configure_device(ipfd, ifr.ifr_name, ip, conf.mac); + /* Set up the tun device. */ + configure_device(ipfd, tapif, ip); - /* Tell Guest what MAC address to use. */ - add_feature(dev, VIRTIO_NET_F_MAC); add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY); + /* Expect Guest to handle everything except UFO */ + add_feature(dev, VIRTIO_NET_F_CSUM); + add_feature(dev, VIRTIO_NET_F_GUEST_CSUM); + add_feature(dev, VIRTIO_NET_F_GUEST_TSO4); + add_feature(dev, VIRTIO_NET_F_GUEST_TSO6); + add_feature(dev, VIRTIO_NET_F_GUEST_ECN); + add_feature(dev, VIRTIO_NET_F_HOST_TSO4); + add_feature(dev, VIRTIO_NET_F_HOST_TSO6); + add_feature(dev, VIRTIO_NET_F_HOST_ECN); set_config(dev, sizeof(conf), &conf); /* We don't need the socket any more; setup is done. */ close(ipfd); - verbose("device %u: tun net %u.%u.%u.%u\n", - devices.device_num++, - (u8)(ip>>24),(u8)(ip>>16),(u8)(ip>>8),(u8)ip); - if (br_name) - verbose("attached to bridge: %s\n", br_name); + devices.device_num++; + + if (bridging) + verbose("device %u: tun %s attached to bridge: %s\n", + devices.device_num, tapif, arg); + else + verbose("device %u: tun %s: %s\n", + devices.device_num, tapif, arg); } /* Our block (disk) device should be really simple: the Guest asks for a block @@ -1550,7 +1716,7 @@ static bool handle_io_finish(int fd, struct device *dev) } /* When the Guest submits some I/O, we just need to wake the I/O thread. */ -static void handle_virtblk_output(int fd, struct virtqueue *vq) +static void handle_virtblk_output(int fd, struct virtqueue *vq, bool timeout) { struct vblk_info *vblk = vq->dev->priv; char c = 0; @@ -1621,6 +1787,64 @@ static void setup_block_file(const char *filename) verbose("device %u: virtblock %llu sectors\n", devices.device_num, le64_to_cpu(conf.capacity)); } + +/* Our random number generator device reads from /dev/random into the Guest's + * input buffers. The usual case is that the Guest doesn't want random numbers + * and so has no buffers although /dev/random is still readable, whereas + * console is the reverse. + * + * The same logic applies, however. */ +static bool handle_rng_input(int fd, struct device *dev) +{ + int len; + unsigned int head, in_num, out_num, totlen = 0; + struct iovec iov[dev->vq->vring.num]; + + /* First we need a buffer from the Guests's virtqueue. */ + head = get_vq_desc(dev->vq, iov, &out_num, &in_num); + + /* If they're not ready for input, stop listening to this file + * descriptor. We'll start again once they add an input buffer. */ + if (head == dev->vq->vring.num) + return false; + + if (out_num) + errx(1, "Output buffers in rng?"); + + /* This is why we convert to iovecs: the readv() call uses them, and so + * it reads straight into the Guest's buffer. We loop to make sure we + * fill it. */ + while (!iov_empty(iov, in_num)) { + len = readv(dev->fd, iov, in_num); + if (len <= 0) + err(1, "Read from /dev/random gave %i", len); + iov_consume(iov, in_num, len); + totlen += len; + } + + /* Tell the Guest about the new input. */ + add_used_and_trigger(fd, dev->vq, head, totlen); + + /* Everything went OK! */ + return true; +} + +/* And this creates a "hardware" random number device for the Guest. */ +static void setup_rng(void) +{ + struct device *dev; + int fd; + + fd = open_or_die("/dev/random", O_RDONLY); + + /* The device responds to return from I/O thread. */ + dev = new_device("rng", VIRTIO_ID_RNG, fd, handle_rng_input); + + /* The device has one virtqueue, where the Guest places inbufs. */ + add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd); + + verbose("device %u: rng\n", devices.device_num++); +} /* That's the end of device setup. */ /*L:230 Reboot is pretty easy: clean up and exec() the Launcher afresh. */ @@ -1628,11 +1852,12 @@ static void __attribute__((noreturn)) restart_guest(void) { unsigned int i; - /* Closing pipes causes the Waker thread and io_threads to die, and - * closing /dev/lguest cleans up the Guest. Since we don't track all - * open fds, we simply close everything beyond stderr. */ + /* Since we don't track all open fds, we simply close everything beyond + * stderr. */ for (i = 3; i < FD_SETSIZE; i++) close(i); + + /* The exec automatically gets rid of the I/O and Waker threads. */ execv(main_args[0], main_args); err(1, "Could not exec %s", main_args[0]); } @@ -1663,7 +1888,7 @@ static void __attribute__((noreturn)) run_guest(int lguest_fd) /* ERESTART means that we need to reboot the guest */ } else if (errno == ERESTART) { restart_guest(); - /* EAGAIN means the Waker wanted us to look at some input. + /* EAGAIN means a signal (timeout). * Anything else means a bug or incompatible change. */ } else if (errno != EAGAIN) err(1, "Running guest failed"); @@ -1691,13 +1916,14 @@ static struct option opts[] = { { "verbose", 0, NULL, 'v' }, { "tunnet", 1, NULL, 't' }, { "block", 1, NULL, 'b' }, + { "rng", 0, NULL, 'r' }, { "initrd", 1, NULL, 'i' }, { NULL }, }; static void usage(void) { errx(1, "Usage: lguest [--verbose] " - "[--tunnet=(|bridge:)\n" + "[--tunnet=(:|bridge::)\n" "|--block=|--initrd=]...\n" " vmlinux [args...]"); } @@ -1765,6 +1991,9 @@ int main(int argc, char *argv[]) case 'b': setup_block_file(optarg); break; + case 'r': + setup_rng(); + break; case 'i': initrd_name = optarg; break; @@ -1783,6 +2012,9 @@ int main(int argc, char *argv[]) /* We always have a console device */ setup_console(); + /* We can timeout waiting for Guest network transmit. */ + setup_timeout(); + /* Now we load the kernel */ start = load_kernel(open_or_die(argv[optind+1], O_RDONLY)); @@ -1826,10 +2058,10 @@ int main(int argc, char *argv[]) * /dev/lguest file descriptor. */ lguest_fd = tell_kernel(pgdir, start); - /* We fork off a child process, which wakes the Launcher whenever one - * of the input file descriptors needs attention. We call this the - * Waker, and we'll cover it in a moment. */ - waker_fd = setup_waker(lguest_fd); + /* We clone off a thread, which wakes the Launcher whenever one of the + * input file descriptors needs attention. We call this the Waker, and + * we'll cover it in a moment. */ + setup_waker(lguest_fd); /* Finally, run the Guest. This doesn't return. */ run_guest(lguest_fd); diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt index 4269a1105b378fafcc689435a2531b9d9d4287db..f4f8b1c6c8ba45ba6ec351aa92c40e798024983c 100644 --- a/Documentation/local_ops.txt +++ b/Documentation/local_ops.txt @@ -36,7 +36,7 @@ It can be done by slightly modifying the standard atomic operations : only their UP variant must be kept. It typically means removing LOCK prefix (on i386 and x86_64) and any SMP sychronization barrier. If the architecture does not have a different behavior between SMP and UP, including asm-generic/local.h -in your archtecture's local.h is sufficient. +in your architecture's local.h is sufficient. The local_t type is defined as an opaque signed long by embedding an atomic_long_t inside a structure. This is made so a cast from this type to a diff --git a/Documentation/moxa-smartio b/Documentation/moxa-smartio index fe24ecc6372e6b3482c3f39972ab9f70077d7b70..5337e80a5b96c6341e523394be6fedc58b87f6ed 100644 --- a/Documentation/moxa-smartio +++ b/Documentation/moxa-smartio @@ -1,14 +1,22 @@ ============================================================================= - - MOXA Smartio Family Device Driver Ver 1.1 Installation Guide - for Linux Kernel 2.2.x and 2.0.3x - Copyright (C) 1999, Moxa Technologies Co, Ltd. + MOXA Smartio/Industio Family Device Driver Installation Guide + for Linux Kernel 2.4.x, 2.6.x + Copyright (C) 2008, Moxa Inc. ============================================================================= +Date: 01/21/2008 + Content 1. Introduction 2. System Requirement 3. Installation + 3.1 Hardware installation + 3.2 Driver files + 3.3 Device naming convention + 3.4 Module driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x. + 3.6 Custom configuration + 3.7 Verify driver installation 4. Utilities 5. Setserial 6. Troubleshooting @@ -16,27 +24,48 @@ Content ----------------------------------------------------------------------------- 1. Introduction - The Smartio family Linux driver, Ver. 1.1, supports following multiport + The Smartio/Industio/UPCI family Linux driver supports following multiport boards. - -C104P/H/HS, C104H/PCI, C104HS/PCI, CI-104J 4 port multiport board. - -C168P/H/HS, C168H/PCI 8 port multiport board. - - This driver has been modified a little and cleaned up from the Moxa - contributed driver code and merged into Linux 2.2.14pre. In particular - official major/minor numbers have been assigned which are different to - those the original Moxa supplied driver used. + - 2 ports multiport board + CP-102U, CP-102UL, CP-102UF + CP-132U-I, CP-132UL, + CP-132, CP-132I, CP132S, CP-132IS, + CI-132, CI-132I, CI-132IS, + (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S) + + - 4 ports multiport board + CP-104EL, + CP-104UL, CP-104JU, + CP-134U, CP-134U-I, + C104H/PCI, C104HS/PCI, + CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL, + C104H, C104HS, + CI-104J, CI-104JS, + CI-134, CI-134I, CI-134IS, + (C114HI, CT-114I, C104P) + POS-104UL, + CB-114, + CB-134I + + - 8 ports multiport board + CP-118EL, CP-168EL, + CP-118U, CP-168U, + C168H/PCI, + C168H, C168HS, + (C168P), + CB-108 This driver and installation procedure have been developed upon Linux Kernel - 2.2.5 and backward compatible to 2.0.3x. This driver supports Intel x86 and - Alpha hardware platform. In order to maintain compatibility, this version - has also been properly tested with RedHat, OpenLinux, TurboLinux and - S.u.S.E Linux. However, if compatibility problem occurs, please contact - Moxa at support@moxa.com.tw. + 2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order + to maintain compatibility, this version has also been properly tested with + RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem + occurs, please contact Moxa at support@moxa.com.tw. In addition to device driver, useful utilities are also provided in this version. They are - - msdiag Diagnostic program for detecting installed Moxa Smartio boards. + - msdiag Diagnostic program for displaying installed Moxa + Smartio/Industio boards. - msmon Monitor program to observe data count and line status signals. - msterm A simple terminal program which is useful in testing serial ports. @@ -47,8 +76,7 @@ Content GNU General Public License in this version. Please refer to GNU General Public License announcement in each source code file for more detail. - In Moxa's ftp sites, you may always find latest driver at - ftp://ftp.moxa.com or ftp://ftp.moxa.com.tw. + In Moxa's Web sites, you may always find latest driver at http://web.moxa.com. This version of driver can be installed as Loadable Module (Module driver) or built-in into kernel (Static driver). You may refer to following @@ -61,18 +89,27 @@ Content ----------------------------------------------------------------------------- 2. System Requirement - - Hardware platform: Intel x86 or Alpha machine - - Kernel version: 2.0.3x or 2.2.x + - Hardware platform: Intel x86 machine + - Kernel version: 2.4.x or 2.6.x - gcc version 2.72 or later - Maximum 4 boards can be installed in combination ----------------------------------------------------------------------------- 3. Installation + 3.1 Hardware installation + 3.2 Driver files + 3.3 Device naming convention + 3.4 Module driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x. + 3.6 Custom configuration + 3.7 Verify driver installation + + 3.1 Hardware installation - There are two types of buses, ISA and PCI, for Smartio family multiport - board. + There are two types of buses, ISA and PCI, for Smartio/Industio + family multiport board. ISA board --------- @@ -81,47 +118,57 @@ Content installation procedure in User's Manual before proceed any further. Please make sure the JP1 is open after the ISA board is set properly. - PCI board - --------- + PCI/UPCI board + -------------- You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict with other ISA devices. Please refer to hardware installation procedure in User's Manual in advance. - IRQ Sharing + PCI IRQ Sharing ----------- Each port within the same multiport board shares the same IRQ. Up to - 4 Moxa Smartio Family multiport boards can be installed together on - one system and they can share the same IRQ. + 4 Moxa Smartio/Industio PCI Family multiport boards can be installed + together on one system and they can share the same IRQ. + - 3.2 Driver files and device naming convention + 3.2 Driver files The driver file may be obtained from ftp, CD-ROM or floppy disk. The first step, anyway, is to copy driver file "mxser.tgz" into specified directory. e.g. /moxa. The execute commands as below. + # cd / + # mkdir moxa # cd /moxa - # tar xvf /dev/fd0 + # tar xvf /dev/fd0 + or + + # cd / + # mkdir moxa # cd /moxa # cp /mnt/cdrom//mxser.tgz . # tar xvfz mxser.tgz + + 3.3 Device naming convention + You may find all the driver and utilities files in /moxa/mxser. Following installation procedure depends on the model you'd like to - run the driver. If you prefer module driver, please refer to 3.3. - If static driver is required, please refer to 3.4. + run the driver. If you prefer module driver, please refer to 3.4. + If static driver is required, please refer to 3.5. Dialin and callout port ----------------------- - This driver remains traditional serial device properties. There're + This driver remains traditional serial device properties. There are two special file name for each serial port. One is dial-in port which is named "ttyMxx". For callout port, the naming convention is "cumxx". Device naming when more than 2 boards installed ----------------------------------------------- - Naming convention for each Smartio multiport board is pre-defined - as below. + Naming convention for each Smartio/Industio multiport board is + pre-defined as below. Board Num. Dial-in Port Callout port 1st board ttyM0 - ttyM7 cum0 - cum7 @@ -129,6 +176,12 @@ Content 3rd board ttyM16 - ttyM23 cum16 - cum23 4th board ttyM24 - ttym31 cum24 - cum31 + + !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + Under Kernel 2.6 the cum Device is Obsolete. So use ttyM* + device instead. + !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + Board sequence -------------- This driver will activate ISA boards according to the parameter set @@ -138,69 +191,131 @@ Content For PCI boards, their sequence will be after ISA boards and C168H/PCI has higher priority than C104H/PCI boards. - 3.3 Module driver configuration + 3.4 Module driver configuration Module driver is easiest way to install. If you prefer static driver installation, please skip this paragraph. - 1. Find "Makefile" in /moxa/mxser, then run - # make install + + ------------- Prepare to use the MOXA driver-------------------- + 3.4.1 Create tty device with correct major number + Before using MOXA driver, your system must have the tty devices + which are created with driver's major number. We offer one shell + script "msmknod" to simplify the procedure. + This step is only needed to be executed once. But you still + need to do this procedure when: + a. You change the driver's major number. Please refer the "3.7" + section. + b. Your total installed MOXA boards number is changed. Maybe you + add/delete one MOXA board. + c. You want to change the tty name. This needs to modify the + shell script "msmknod" + + The procedure is: + # cd /moxa/mxser/driver + # ./msmknod + + This shell script will require the major number for dial-in + device and callout device to create tty device. You also need + to specify the total installed MOXA board number. Default major + numbers for dial-in device and callout device are 30, 35. If + you need to change to other number, please refer section "3.7" + for more detailed procedure. + Msmknod will delete any special files occupying the same device + naming. + + 3.4.2 Build the MOXA driver and utilities + Before using the MOXA driver and utilities, you need compile the + all the source code. This step is only need to be executed once. + But you still re-compile the source code if you modify the source + code. For example, if you change the driver's major number (see + "3.7" section), then you need to do this step again. + + Find "Makefile" in /moxa/mxser, then run + + # make clean; make install + + !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! + For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1: + # make clean; make installsp1 + + For Red Hat Enterprise Linux AS4/ES4/WS4: + # make clean; make installsp2 + !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! The driver files "mxser.o" and utilities will be properly compiled - and copied to system directories respectively.Then run + and copied to system directories respectively. - # insmod mxser + ------------- Load MOXA driver-------------------- + 3.4.3 Load the MOXA driver - to activate the modular driver. You may run "lsmod" to check - if "mxser.o" is activated. + # modprobe mxser - 2. Create special files by executing "msmknod". - # cd /moxa/mxser/driver - # ./msmknod + will activate the module driver. You may run "lsmod" to check + if "mxser" is activated. If the MOXA board is ISA board, the + is needed. Please refer to section "3.4.5" for more + information. + + + ------------- Load MOXA driver on boot -------------------- + 3.4.4 For the above description, you may manually execute + "modprobe mxser" to activate this driver and run + "rmmod mxser" to remove it. + However, it's better to have a boot time configuration to + eliminate manual operation. Boot time configuration can be + achieved by rc file. We offer one "rc.mxser" file to simplify + the procedure under "moxa/mxser/driver". - Default major numbers for dial-in device and callout device are - 174, 175. Msmknod will delete any special files occupying the same - device naming. + But if you use ISA board, please modify the "modprobe ..." command + to add the argument (see "3.4.5" section). After modifying the + rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser" + manually to make sure the modification is ok. If any error + encountered, please try to modify again. If the modification is + completed, follow the below step. - 3. Up to now, you may manually execute "insmod mxser" to activate - this driver and run "rmmod mxser" to remove it. However, it's - better to have a boot time configuration to eliminate manual - operation. - Boot time configuration can be achieved by rc file. Run following - command for setting rc files. + Run following command for setting rc files. # cd /moxa/mxser/driver # cp ./rc.mxser /etc/rc.d # cd /etc/rc.d - You may have to modify part of the content in rc.mxser to specify - parameters for ISA board. Please refer to rc.mxser for more detail. - Find "rc.serial". If "rc.serial" doesn't exist, create it by vi. - Add "rc.mxser" in last line. Next, open rc.local by vi - and append following content. + Check "rc.serial" is existed or not. If "rc.serial" doesn't exist, + create it by vi, run "chmod 755 rc.serial" to change the permission. + Add "/etc/rc.d/rc.mxser" in last line, - if [ -f /etc/rc.d/rc.serial ]; then - sh /etc/rc.d/rc.serial - fi + Reboot and check if moxa.o activated by "lsmod" command. - 4. Reboot and check if mxser.o activated by "lsmod" command. - 5. If you'd like to drive Smartio ISA boards in the system, you'll - have to add parameter to specify CAP address of given board while - activating "mxser.o". The format for parameters are as follows. + 3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system, + you'll have to add parameter to specify CAP address of given + board while activating "mxser.o". The format for parameters are + as follows. - insmod mxser ioaddr=0x???,0x???,0x???,0x??? + modprobe mxser ioaddr=0x???,0x???,0x???,0x??? | | | | | | | +- 4th ISA board | | +------ 3rd ISA board | +------------ 2nd ISA board +------------------- 1st ISA board - 3.4 Static driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x + + Note: To use static driver, you must install the linux kernel + source package. + + 3.5.1 Backup the built-in driver in the kernel. + # cd /usr/src/linux/drivers/char + # mv mxser.c mxser.c.old + + For Red Hat 7.x user, you need to create link: + # cd /usr/src + # ln -s linux-2.4 linux - 1. Create link + 3.5.2 Create link # cd /usr/src/linux/drivers/char # ln -s /moxa/mxser/driver/mxser.c mxser.c - 2. Add CAP address list for ISA boards + 3.5.3 Add CAP address list for ISA boards. For PCI boards user, + please skip this step. + In module mode, the CAP address for ISA board is given by parameter. In static driver configuration, you'll have to assign it within driver's source code. If you will not @@ -222,73 +337,55 @@ Content static int mxserBoardCAP[] = {0x280, 0x180, 0x00, 0x00}; - 3. Modify tty_io.c - # cd /usr/src/linux/drivers/char/ - # vi tty_io.c - Find pty_init(), insert "mxser_init()" as + 3.5.4 Setup kernel configuration - pty_init(); - mxser_init(); + Configure the kernel: - 4. Modify tty.h - # cd /usr/src/linux/include/linux - # vi tty.h - Find extern int tty_init(void), insert "mxser_init()" as + # cd /usr/src/linux + # make menuconfig - extern int tty_init(void); - extern int mxser_init(void); - - 5. Modify Makefile - # cd /usr/src/linux/drivers/char - # vi Makefile - Find L_OBJS := tty_io.o ...... random.o, add - "mxser.o" at last of this line as - L_OBJS := tty_io.o ....... mxser.o + You will go into a menu-driven system. Please select [Character + devices][Non-standard serial port support], enable the [Moxa + SmartIO support] driver with "[*]" for built-in (not "[M]"), then + select [Exit] to exit this program. - 6. Rebuild kernel - The following are for Linux kernel rebuilding,for your reference only. + 3.5.5 Rebuild kernel + The following are for Linux kernel rebuilding, for your + reference only. For appropriate details, please refer to the Linux document. - If 'lilo' utility is installed, please use 'make zlilo' to rebuild - kernel. If 'lilo' is not installed, please follow the following steps. - a. cd /usr/src/linux - b. make clean /* take a few minutes */ - c. make bzImage /* take probably 10-20 minutes */ - d. Backup original boot kernel. /* optional step */ - e. cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz + b. make clean /* take a few minutes */ + c. make dep /* take a few minutes */ + d. make bzImage /* take probably 10-20 minutes */ + e. make install /* copy boot image to correct position */ f. Please make sure the boot kernel (vmlinuz) is in the - correct position. If you use 'lilo' utility, you should - check /etc/lilo.conf 'image' item specified the path - which is the 'vmlinuz' path, or you will load wrong - (or old) boot kernel image (vmlinuz). - g. chmod 400 /vmlinuz - h. lilo - i. rdev -R /vmlinuz 1 - j. sync - - Note that if the result of "make zImage" is ERROR, then you have to - go back to Linux configuration Setup. Type "make config" in directory - /usr/src/linux or "setup". - - Since system include file, /usr/src/linux/include/linux/interrupt.h, - is modified each time the MOXA driver is installed, kernel rebuilding - is inevitable. And it takes about 10 to 20 minutes depends on the - machine. - - 7. Make utility - # cd /moxa/mxser/utility - # make install - - 8. Make special file + correct position. + g. If you use 'lilo' utility, you should check /etc/lilo.conf + 'image' item specified the path which is the 'vmlinuz' path, + or you will load wrong (or old) boot kernel image (vmlinuz). + After checking /etc/lilo.conf, please run "lilo". + + Note that if the result of "make bzImage" is ERROR, then you have to + go back to Linux configuration Setup. Type "make menuconfig" in + directory /usr/src/linux. + + + 3.5.6 Make tty device and special file # cd /moxa/mxser/driver # ./msmknod - 9. Reboot + 3.5.7 Make utility + # cd /moxa/mxser/utility + # make clean; make install + + 3.5.8 Reboot - 3.5 Custom configuration + + + 3.6 Custom configuration Although this driver already provides you default configuration, you - still can change the device name and major number.The instruction to + still can change the device name and major number. The instruction to change these parameters are shown as below. Change Device name @@ -306,33 +403,37 @@ Content 2 free major numbers for this driver. There are 3 steps to change major numbers. - 1. Find free major numbers + 3.6.1 Find free major numbers In /proc/devices, you may find all the major numbers occupied in the system. Please select 2 major numbers that are available. e.g. 40, 45. - 2. Create special files + 3.6.2 Create special files Run /moxa/mxser/driver/msmknod to create special files with specified major numbers. - 3. Modify driver with new major number + 3.6.3 Modify driver with new major number Run vi to open /moxa/mxser/driver/mxser.c. Locate the line contains "MXSERMAJOR". Change the content as below. #define MXSERMAJOR 40 #define MXSERCUMAJOR 45 - 4. Run # make install in /moxa/mxser/driver. + 3.6.4 Run "make clean; make install" in /moxa/mxser/driver. - 3.6 Verify driver installation + 3.7 Verify driver installation You may refer to /var/log/messages to check the latest status log reported by this driver whenever it's activated. + ----------------------------------------------------------------------------- 4. Utilities There are 3 utilities contained in this driver. They are msdiag, msmon and msterm. These 3 utilities are released in form of source code. They should be compiled into executable file and copied into /usr/bin. + Before using these utilities, please load driver (refer 3.4 & 3.5) and + make sure you had run the "msmknod" utility. + msdiag - Diagnostic -------------------- - This utility provides the function to detect what Moxa Smartio multiport - board exists in the system. + This utility provides the function to display what Moxa Smartio/Industio + board found by driver in the system. msmon - Port Monitoring ----------------------- @@ -353,12 +454,13 @@ Content application, for example, sending AT command to a modem connected to the port or used as a terminal for login purpose. Note that this is only a dumb terminal emulation without handling full screen operation. + ----------------------------------------------------------------------------- 5. Setserial Supported Setserial parameters are listed as below. - uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) + uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) close_delay set the amount of time(in 1/100 of a second) that DTR should be kept low while being closed. closing_wait set the amount of time(in 1/100 of a second) that the @@ -366,7 +468,13 @@ Content being closed, before the receiver is disable. spd_hi Use 57.6kb when the application requests 38.4kb. spd_vhi Use 115.2kb when the application requests 38.4kb. + spd_shi Use 230.4kb when the application requests 38.4kb. + spd_warp Use 460.8kb when the application requests 38.4kb. spd_normal Use 38.4kb when the application requests 38.4kb. + spd_cust Use the custom divisor to set the speed when the + application requests 38.4kb. + divisor This option set the custom divison. + baud_base This option set the base baud rate. ----------------------------------------------------------------------------- 6. Troubleshooting @@ -375,8 +483,9 @@ Content possible. If all the possible solutions fail, please contact our technical support team to get more help. - Error msg: More than 4 Moxa Smartio family boards found. Fifth board and - after are ignored. + + Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board + and after are ignored. Solution: To avoid this problem, please unplug fifth and after board, because Moxa driver supports up to 4 boards. @@ -384,7 +493,7 @@ Content Error msg: Request_irq fail, IRQ(?) may be conflict with another device. Solution: Other PCI or ISA devices occupy the assigned IRQ. If you are not sure - which device causes the situation,please check /proc/interrupts to find + which device causes the situation, please check /proc/interrupts to find free IRQ and simply change another free IRQ for Moxa board. Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid. @@ -397,15 +506,18 @@ Content Moxa ISA board needs an interrupt vector.Please refer to user's manual "Hardware Installation" chapter to set interrupt vector. - Error msg: Couldn't install MOXA Smartio family driver! + Error msg: Couldn't install MOXA Smartio/Industio family driver! Solution: Load Moxa driver fail, the major number may conflict with other devices. - Please refer to previous section 3.5 to change a free major number for + Please refer to previous section 3.7 to change a free major number for Moxa driver. - Error msg: Couldn't install MOXA Smartio family callout driver! + Error msg: Couldn't install MOXA Smartio/Industio family callout driver! Solution: Load Moxa callout driver fail, the callout device major number may - conflict with other devices. Please refer to previous section 3.5 to + conflict with other devices. Please refer to previous section 3.7 to change a free callout device major number for Moxa driver. + + ----------------------------------------------------------------------------- + diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..6d8af1ac56c410f11d0e85863a180884082c21ee --- /dev/null +++ b/Documentation/networking/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := ifenslave + +# Tell kbuild to always build the programs +always := $(hostprogs-y) diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 7fa7fe71d7a8310c00c8cade78688ece2d5250c4..688dfe1e6b70f75a36d84f30dda2234c53664be0 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -631,7 +631,7 @@ xmit_hash_policy in environments where a layer3 gateway device is required to reach most destinations. - This algorithm is 802.3ad complient. + This algorithm is 802.3ad compliant. layer3+4 diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 641d2afacffa33094a5ee7a52e6646ec7c089220..297ba7b1ccaf953ff85e486baa0a7547450db31c 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -186,7 +186,7 @@ solution for a couple of reasons: The Linux network devices (by default) just can handle the transmission and reception of media dependent frames. Due to the - arbritration on the CAN bus the transmission of a low prio CAN-ID + arbitration on the CAN bus the transmission of a low prio CAN-ID may be delayed by the reception of a high prio CAN frame. To reflect the correct* traffic on the node the loopback of the sent data has to be performed right after a successful transmission. If @@ -481,7 +481,7 @@ solution for a couple of reasons: - stats_timer: To calculate the Socket CAN core statistics (e.g. current/maximum frames per second) this 1 second timer is invoked at can.ko module start time by default. This timer can be - disabled by using stattimer=0 on the module comandline. + disabled by using stattimer=0 on the module commandline. - debug: (removed since SocketCAN SVN r546) diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c index a12059886755c7d2b5ff346eaaf495f9376a589a..1b96ccda3836507b18e14a60744b7bfa16de1c83 100644 --- a/Documentation/networking/ifenslave.c +++ b/Documentation/networking/ifenslave.c @@ -1081,7 +1081,7 @@ static int set_if_addr(char *master_ifname, char *slave_ifname) } - ipaddr = ifr.ifr_addr.sa_data; + ipaddr = (unsigned char *)ifr.ifr_addr.sa_data; v_print("Interface '%s': set IP %s to %d.%d.%d.%d\n", slave_ifname, ifra[i].desc, ipaddr[0], ipaddr[1], ipaddr[2], ipaddr[3]); diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index db0cd51695812cfe2c8850bb80471b422f994e25..07c53d5960353fa571e99a73b67910d7b10d6125 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -326,7 +326,7 @@ just one call to mmap is needed: mmap(0, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); If tp_frame_size is a divisor of tp_block_size frames will be -contiguosly spaced by tp_frame_size bytes. If not, each +contiguously spaced by tp_frame_size bytes. If not, each tp_block_size/tp_frame_size frames there will be a gap between the frames. This is because a frame cannot be spawn across two blocks. diff --git a/Documentation/networking/tc-actions-env-rules.txt b/Documentation/networking/tc-actions-env-rules.txt index 01e716d185f4253af3a262bdbfb4bde3dbdbb561..dcadf6f88e34222ef430d9423b34604c4ff37edd 100644 --- a/Documentation/networking/tc-actions-env-rules.txt +++ b/Documentation/networking/tc-actions-env-rules.txt @@ -4,26 +4,27 @@ The "enviromental" rules for authors of any new tc actions are: 1) If you stealeth or borroweth any packet thou shalt be branching from the righteous path and thou shalt cloneth. -For example if your action queues a packet to be processed later -or intentionaly branches by redirecting a packet then you need to +For example if your action queues a packet to be processed later, +or intentionally branches by redirecting a packet, then you need to clone the packet. + There are certain fields in the skb tc_verd that need to be reset so we -avoid loops etc. A few are generic enough so much so that skb_act_clone() -resets them for you. So invoke skb_act_clone() rather than skb_clone() +avoid loops, etc. A few are generic enough that skb_act_clone() +resets them for you, so invoke skb_act_clone() rather than skb_clone(). 2) If you munge any packet thou shalt call pskb_expand_head in the case someone else is referencing the skb. After that you "own" the skb. You must also tell us if it is ok to munge the packet (TC_OK2MUNGE), this way any action downstream can stomp on the packet. -3) dropping packets you dont own is a nono. You simply return +3) Dropping packets you don't own is a no-no. You simply return TC_ACT_SHOT to the caller and they will drop it. The "enviromental" rules for callers of actions (qdiscs etc) are: -*) thou art responsible for freeing anything returned as being +*) Thou art responsible for freeing anything returned as being TC_ACT_SHOT/STOLEN/QUEUED. If none of TC_ACT_SHOT/STOLEN/QUEUED is -returned then all is great and you dont need to do anything. +returned, then all is great and you don't need to do anything. Post on netdev if something is unclear. diff --git a/Documentation/pcmcia/Makefile b/Documentation/pcmcia/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..accde871ae7771c629f5fb8f7585059145648a2d --- /dev/null +++ b/Documentation/pcmcia/Makefile @@ -0,0 +1,10 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := crc32hash + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_crc32hash.o += -I$(objtree)/usr/include diff --git a/Documentation/pcmcia/crc32hash.c b/Documentation/pcmcia/crc32hash.c index cbc36d299af808016fd0d018ed27a3cbfe57615e..4210e5abab8a8b86de57770420ac0cfff96a4b38 100644 --- a/Documentation/pcmcia/crc32hash.c +++ b/Documentation/pcmcia/crc32hash.c @@ -26,7 +26,7 @@ int main(int argc, char **argv) { printf("no string passed as argument\n"); return -1; } - result = crc32(argv[1], strlen(argv[1])); + result = crc32((unsigned char const *)argv[1], strlen(argv[1])); printf("0x%x\n", result); return 0; } diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX index a55d7f1c836d7de2ad0b09b9ea2c138562db01a6..fb742c213c9eb37b9e8216c96f029bebed6a86e9 100644 --- a/Documentation/power/00-INDEX +++ b/Documentation/power/00-INDEX @@ -1,5 +1,7 @@ 00-INDEX - This file +apm-acpi.txt + - basic info about the APM and ACPI support. basic-pm-debugging.txt - Debugging suspend and resume devices.txt @@ -14,8 +16,6 @@ notifiers.txt - Registering suspend notifiers in device drivers pci.txt - How the PCI Subsystem Does Power Management -pm.txt - - info on Linux power management support. pm_qos_interface.txt - info on Linux PM Quality of Service interface power_supply_class.txt diff --git a/Documentation/power/apm-acpi.txt b/Documentation/power/apm-acpi.txt new file mode 100644 index 0000000000000000000000000000000000000000..1bd799dc17e8299b2764efb720c49635277cd666 --- /dev/null +++ b/Documentation/power/apm-acpi.txt @@ -0,0 +1,32 @@ +APM or ACPI? +------------ +If you have a relatively recent x86 mobile, desktop, or server system, +odds are it supports either Advanced Power Management (APM) or +Advanced Configuration and Power Interface (ACPI). ACPI is the newer +of the two technologies and puts power management in the hands of the +operating system, allowing for more intelligent power management than +is possible with BIOS controlled APM. + +The best way to determine which, if either, your system supports is to +build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is +enabled by default). If a working ACPI implementation is found, the +ACPI driver will override and disable APM, otherwise the APM driver +will be used. + +No, sorry, you cannot have both ACPI and APM enabled and running at +once. Some people with broken ACPI or broken APM implementations +would like to use both to get a full set of working features, but you +simply cannot mix and match the two. Only one power management +interface can be in control of the machine at once. Think about it.. + +User-space Daemons +------------------ +Both APM and ACPI rely on user-space daemons, apmd and acpid +respectively, to be completely functional. Obtain both of these +daemons from your Linux distribution or from the Internet (see below) +and be sure that they are started sometime in the system boot process. +Go ahead and start both. If ACPI or APM is not available on your +system the associated daemon will exit gracefully. + + apmd: http://worldvisions.ca/~apenwarr/apmd/ + acpid: http://acpid.sf.net/ diff --git a/Documentation/power/pm.txt b/Documentation/power/pm.txt deleted file mode 100644 index be841507e43fa0745f6c6eef55e06356ae725709..0000000000000000000000000000000000000000 --- a/Documentation/power/pm.txt +++ /dev/null @@ -1,257 +0,0 @@ - Linux Power Management Support - -This document briefly describes how to use power management with your -Linux system and how to add power management support to Linux drivers. - -APM or ACPI? ------------- -If you have a relatively recent x86 mobile, desktop, or server system, -odds are it supports either Advanced Power Management (APM) or -Advanced Configuration and Power Interface (ACPI). ACPI is the newer -of the two technologies and puts power management in the hands of the -operating system, allowing for more intelligent power management than -is possible with BIOS controlled APM. - -The best way to determine which, if either, your system supports is to -build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is -enabled by default). If a working ACPI implementation is found, the -ACPI driver will override and disable APM, otherwise the APM driver -will be used. - -No, sorry, you cannot have both ACPI and APM enabled and running at -once. Some people with broken ACPI or broken APM implementations -would like to use both to get a full set of working features, but you -simply cannot mix and match the two. Only one power management -interface can be in control of the machine at once. Think about it.. - -User-space Daemons ------------------- -Both APM and ACPI rely on user-space daemons, apmd and acpid -respectively, to be completely functional. Obtain both of these -daemons from your Linux distribution or from the Internet (see below) -and be sure that they are started sometime in the system boot process. -Go ahead and start both. If ACPI or APM is not available on your -system the associated daemon will exit gracefully. - - apmd: http://worldvisions.ca/~apenwarr/apmd/ - acpid: http://acpid.sf.net/ - -Driver Interface -- OBSOLETE, DO NOT USE! -----------------************************* - -Note: pm_register(), pm_access(), pm_dev_idle() and friends are -obsolete. Please do not use them. Instead you should properly hook -your driver into the driver model, and use its suspend()/resume() -callbacks to do this kind of stuff. - -If you are writing a new driver or maintaining an old driver, it -should include power management support. Without power management -support, a single driver may prevent a system with power management -capabilities from ever being able to suspend (safely). - -Overview: -1) Register each instance of a device with "pm_register" -2) Call "pm_access" before accessing the hardware. - (this will ensure that the hardware is awake and ready) -3) Your "pm_callback" is called before going into a - suspend state (ACPI D1-D3) or after resuming (ACPI D0) - from a suspend. -4) Call "pm_dev_idle" when the device is not being used - (optional but will improve device idle detection) -5) When unloaded, unregister the device with "pm_unregister" - -/* - * Description: Register a device with the power-management subsystem - * - * Parameters: - * type - device type (PCI device, system device, ...) - * id - instance number or unique identifier - * cback - request handler callback (suspend, resume, ...) - * - * Returns: Registered PM device or NULL on error - * - * Examples: - * dev = pm_register(PM_SYS_DEV, PM_SYS_VGA, vga_callback); - * - * struct pci_dev *pci_dev = pci_find_dev(...); - * dev = pm_register(PM_PCI_DEV, PM_PCI_ID(pci_dev), callback); - */ -struct pm_dev *pm_register(pm_dev_t type, unsigned long id, pm_callback cback); - -/* - * Description: Unregister a device with the power management subsystem - * - * Parameters: - * dev - PM device previously returned from pm_register - */ -void pm_unregister(struct pm_dev *dev); - -/* - * Description: Unregister all devices with a matching callback function - * - * Parameters: - * cback - previously registered request callback - * - * Notes: Provided for easier porting from old APM interface - */ -void pm_unregister_all(pm_callback cback); - -/* - * Power management request callback - * - * Parameters: - * dev - PM device previously returned from pm_register - * rqst - request type - * data - data, if any, associated with the request - * - * Returns: 0 if the request is successful - * EINVAL if the request is not supported - * EBUSY if the device is now busy and cannot handle the request - * ENOMEM if the device was unable to handle the request due to memory - * - * Details: The device request callback will be called before the - * device/system enters a suspend state (ACPI D1-D3) or - * or after the device/system resumes from suspend (ACPI D0). - * For PM_SUSPEND, the ACPI D-state being entered is passed - * as the "data" argument to the callback. The device - * driver should save (PM_SUSPEND) or restore (PM_RESUME) - * device context when the request callback is called. - * - * Once a driver returns 0 (success) from a suspend - * request, it should not process any further requests or - * access the device hardware until a call to "pm_access" is made. - */ -typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data); - -Driver Details --------------- -This is just a quick Q&A as a stopgap until a real driver writers' -power management guide is available. - -Q: When is a device suspended? - -Devices can be suspended based on direct user request (eg. laptop lid -closes), system power policy (eg. sleep after 30 minutes of console -inactivity), or device power policy (eg. power down device after 5 -minutes of inactivity) - -Q: Must a driver honor a suspend request? - -No, a driver can return -EBUSY from a suspend request and this -will stop the system from suspending. When a suspend request -fails, all suspended devices are resumed and the system continues -to run. Suspend can be retried at a later time. - -Q: Can the driver block suspend/resume requests? - -Yes, a driver can delay its return from a suspend or resume -request until the device is ready to handle requests. It -is advantageous to return as quickly as possible from a -request as suspend/resume are done serially. - -Q: What context is a suspend/resume initiated from? - -A suspend or resume is initiated from a kernel thread context. -It is safe to block, allocate memory, initiate requests -or anything else you can do within the kernel. - -Q: Will requests continue to arrive after a suspend? - -Possibly. It is the driver's responsibility to queue(*), -fail, or drop any requests that arrive after returning -success to a suspend request. It is important that the -driver not access its device until after it receives -a resume request as the device's bus may no longer -be active. - -(*) If a driver queues requests for processing after - resume be aware that the device, network, etc. - might be in a different state than at suspend time. - It's probably better to drop requests unless - the driver is a storage device. - -Q: Do I have to manage bus-specific power management registers - -No. It is the responsibility of the bus driver to manage -PCI, USB, etc. power management registers. The bus driver -or the power management subsystem will also enable any -wake-on functionality that the device has. - -Q: So, really, what do I need to do to support suspend/resume? - -You need to save any device context that would -be lost if the device was powered off and then restore -it at resume time. When ACPI is active, there are -three levels of device suspend states; D1, D2, and D3. -(The suspend state is passed as the "data" argument -to the device callback.) With D3, the device is powered -off and loses all context, D1 and D2 are shallower power -states and require less device context to be saved. To -play it safe, just save everything at suspend and restore -everything at resume. - -Q: Where do I store device context for suspend? - -Anywhere in memory, kmalloc a buffer or store it -in the device descriptor. You are guaranteed that the -contents of memory will be restored and accessible -before resume, even when the system suspends to disk. - -Q: What do I need to do for ACPI vs. APM vs. etc? - -Drivers need not be aware of the specific power management -technology that is active. They just need to be aware -of when the overlying power management system requests -that they suspend or resume. - -Q: What about device dependencies? - -When a driver registers a device, the power management -subsystem uses the information provided to build a -tree of device dependencies (eg. USB device X is on -USB controller Y which is on PCI bus Z) When power -management wants to suspend a device, it first sends -a suspend request to its driver, then the bus driver, -and so on up to the system bus. Device resumes -proceed in the opposite direction. - -Q: Who do I contact for additional information about - enabling power management for my specific driver/device? - -ACPI Development mailing list: linux-acpi@vger.kernel.org - -System Interface -- OBSOLETE, DO NOT USE! -----------------************************* -If you are providing new power management support to Linux (ie. -adding support for something like APM or ACPI), you should -communicate with drivers through the existing generic power -management interface. - -/* - * Send a request to all devices - * - * Parameters: - * rqst - request type - * data - data, if any, associated with the request - * - * Returns: 0 if the request is successful - * See "pm_callback" return for errors - * - * Details: Walk list of registered devices and call pm_send - * for each until complete or an error is encountered. - * If an error is encountered for a suspend request, - * return all devices to the state they were in before - * the suspend request. - */ -int pm_send_all(pm_request_t rqst, void *data); - -/* - * Find a matching device - * - * Parameters: - * type - device type (PCI device, system device, or 0 to match all devices) - * from - previous match or NULL to start from the beginning - * - * Returns: Matching device or NULL if none found - */ -struct pm_dev *pm_find(pm_dev_t type, struct pm_dev *from); diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt index 49adb1a3351487d992aeb922a34604b46691a7c5..c40866e8b9576c296853383ecaaf95c49930843a 100644 --- a/Documentation/power/pm_qos_interface.txt +++ b/Documentation/power/pm_qos_interface.txt @@ -1,4 +1,4 @@ -PM quality of Service interface. +PM Quality Of Service Interface. This interface provides a kernel and user mode interface for registering performance expectations by drivers, subsystems and user space applications on @@ -7,6 +7,11 @@ one of the parameters. Currently we have {cpu_dma_latency, network_latency, network_throughput} as the initial set of pm_qos parameters. +Each parameters have defined units: + * latency: usec + * timeout: usec + * throughput: kbs (kilo bit / sec) + The infrastructure exposes multiple misc device nodes one per implemented parameter. The set of parameters implement is defined by pm_qos_power_init() and pm_qos_params.h. This is done because having the available parameters diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index a8686e5a68579fc207d4c12e59246d7aee58ffcd..c6cd4956047c2f88c24ef5df0282193e885b6b3e 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -101,6 +101,10 @@ of charge when battery became full/empty". It also could mean "value of charge when battery considered full/empty at given conditions (temperature, age)". I.e. these attributes represents real thresholds, not design values. +CHARGE_COUNTER - the current charge counter (in µAh). This could easily +be negative; there is no empty or full value. It is only useful for +relative, time-based measurements. + ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. CAPACITY - capacity in percents. diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt new file mode 100644 index 0000000000000000000000000000000000000000..82b7a43aadba7255381aef69951a304efc217fa6 --- /dev/null +++ b/Documentation/power/regulator/consumer.txt @@ -0,0 +1,182 @@ +Regulator Consumer Driver Interface +=================================== + +This text describes the regulator interface for consumer device drivers. +Please see overview.txt for a description of the terms used in this text. + + +1. Consumer Regulator Access (static & dynamic drivers) +======================================================= + +A consumer driver can get access to it's supply regulator by calling :- + +regulator = regulator_get(dev, "Vcc"); + +The consumer passes in it's struct device pointer and power supply ID. The core +then finds the correct regulator by consulting a machine specific lookup table. +If the lookup is successful then this call will return a pointer to the struct +regulator that supplies this consumer. + +To release the regulator the consumer driver should call :- + +regulator_put(regulator); + +Consumers can be supplied by more than one regulator e.g. codec consumer with +analog and digital supplies :- + +digital = regulator_get(dev, "Vcc"); /* digital core */ +analog = regulator_get(dev, "Avdd"); /* analog */ + +The regulator access functions regulator_get() and regulator_put() will +usually be called in your device drivers probe() and remove() respectively. + + +2. Regulator Output Enable & Disable (static & dynamic drivers) +==================================================================== + +A consumer can enable it's power supply by calling:- + +int regulator_enable(regulator); + +NOTE: The supply may already be enabled before regulator_enabled() is called. +This may happen if the consumer shares the regulator or the regulator has been +previously enabled by bootloader or kernel board initialization code. + +A consumer can determine if a regulator is enabled by calling :- + +int regulator_is_enabled(regulator); + +This will return > zero when the regulator is enabled. + + +A consumer can disable it's supply when no longer needed by calling :- + +int regulator_disable(regulator); + +NOTE: This may not disable the supply if it's shared with other consumers. The +regulator will only be disabled when the enabled reference count is zero. + +Finally, a regulator can be forcefully disabled in the case of an emergency :- + +int regulator_force_disable(regulator); + +NOTE: this will immediately and forcefully shutdown the regulator output. All +consumers will be powered off. + + +3. Regulator Voltage Control & Status (dynamic drivers) +====================================================== + +Some consumer drivers need to be able to dynamically change their supply +voltage to match system operating points. e.g. CPUfreq drivers can scale +voltage along with frequency to save power, SD drivers may need to select the +correct card voltage, etc. + +Consumers can control their supply voltage by calling :- + +int regulator_set_voltage(regulator, min_uV, max_uV); + +Where min_uV and max_uV are the minimum and maximum acceptable voltages in +microvolts. + +NOTE: this can be called when the regulator is enabled or disabled. If called +when enabled, then the voltage changes instantly, otherwise the voltage +configuration changes and the voltage is physically set when the regulator is +next enabled. + +The regulators configured voltage output can be found by calling :- + +int regulator_get_voltage(regulator); + +NOTE: get_voltage() will return the configured output voltage whether the +regulator is enabled or disabled and should NOT be used to determine regulator +output state. However this can be used in conjunction with is_enabled() to +determine the regulator physical output voltage. + + +4. Regulator Current Limit Control & Status (dynamic drivers) +=========================================================== + +Some consumer drivers need to be able to dynamically change their supply +current limit to match system operating points. e.g. LCD backlight driver can +change the current limit to vary the backlight brightness, USB drivers may want +to set the limit to 500mA when supplying power. + +Consumers can control their supply current limit by calling :- + +int regulator_set_current_limit(regulator, min_uV, max_uV); + +Where min_uA and max_uA are the minimum and maximum acceptable current limit in +microamps. + +NOTE: this can be called when the regulator is enabled or disabled. If called +when enabled, then the current limit changes instantly, otherwise the current +limit configuration changes and the current limit is physically set when the +regulator is next enabled. + +A regulators current limit can be found by calling :- + +int regulator_get_current_limit(regulator); + +NOTE: get_current_limit() will return the current limit whether the regulator +is enabled or disabled and should not be used to determine regulator current +load. + + +5. Regulator Operating Mode Control & Status (dynamic drivers) +============================================================= + +Some consumers can further save system power by changing the operating mode of +their supply regulator to be more efficient when the consumers operating state +changes. e.g. consumer driver is idle and subsequently draws less current + +Regulator operating mode can be changed indirectly or directly. + +Indirect operating mode control. +-------------------------------- +Consumer drivers can request a change in their supply regulator operating mode +by calling :- + +int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); + +This will cause the core to recalculate the total load on the regulator (based +on all it's consumers) and change operating mode (if necessary and permitted) +to best match the current operating load. + +The load_uA value can be determined from the consumers datasheet. e.g.most +datasheets have tables showing the max current consumed in certain situations. + +Most consumers will use indirect operating mode control since they have no +knowledge of the regulator or whether the regulator is shared with other +consumers. + +Direct operating mode control. +------------------------------ +Bespoke or tightly coupled drivers may want to directly control regulator +operating mode depending on their operating point. This can be achieved by +calling :- + +int regulator_set_mode(struct regulator *regulator, unsigned int mode); +unsigned int regulator_get_mode(struct regulator *regulator); + +Direct mode will only be used by consumers that *know* about the regulator and +are not sharing the regulator with other consumers. + + +6. Regulator Events +=================== +Regulators can notify consumers of external events. Events could be received by +consumers under regulator stress or failure conditions. + +Consumers can register interest in regulator events by calling :- + +int regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb); + +Consumers can uregister interest by calling :- + +int regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb); + +Regulators use the kernel notifier framework to send event to thier interested +consumers. diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt new file mode 100644 index 0000000000000000000000000000000000000000..c9a35665cf7072c52c92027a715e980c9479a3b7 --- /dev/null +++ b/Documentation/power/regulator/machine.txt @@ -0,0 +1,101 @@ +Regulator Machine Driver Interface +=================================== + +The regulator machine driver interface is intended for board/machine specific +initialisation code to configure the regulator subsystem. Typical things that +machine drivers would do are :- + + 1. Regulator -> Device mapping. + 2. Regulator supply configuration. + 3. Power Domain constraint setting. + + + +1. Regulator -> device mapping +============================== +Consider the following machine :- + + Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] + | + +-> [Consumer B @ 3.3V] + +The drivers for consumers A & B must be mapped to the correct regulator in +order to control their power supply. This mapping can be achieved in machine +initialisation code by calling :- + +int regulator_set_device_supply(const char *regulator, struct device *dev, + const char *supply); + +and is shown with the following code :- + +regulator_set_device_supply("Regulator-1", devB, "Vcc"); +regulator_set_device_supply("Regulator-2", devA, "Vcc"); + +This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2 +to the 'Vcc' supply for Consumer A. + + +2. Regulator supply configuration. +================================== +Consider the following machine (again) :- + + Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] + | + +-> [Consumer B @ 3.3V] + +Regulator-1 supplies power to Regulator-2. This relationship must be registered +with the core so that Regulator-1 is also enabled when Consumer A enables it's +supply (Regulator-2). + +This relationship can be register with the core via :- + +int regulator_set_supply(const char *regulator, const char *regulator_supply); + +In this example we would use the following code :- + +regulator_set_supply("Regulator-2", "Regulator-1"); + +Relationships can be queried by calling :- + +const char *regulator_get_supply(const char *regulator); + + +3. Power Domain constraint setting. +=================================== +Each power domain within a system has physical constraints on voltage and +current. This must be defined in software so that the power domain is always +operated within specifications. + +Consider the following machine (again) :- + + Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] + | + +-> [Consumer B @ 3.3V] + +This gives us two regulators and two power domains: + + Domain 1: Regulator-2, Consumer B. + Domain 2: Consumer A. + +Constraints can be registered by calling :- + +int regulator_set_platform_constraints(const char *regulator, + struct regulation_constraints *constraints); + +The example is defined as follows :- + +struct regulation_constraints domain_1 = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, +}; + +struct regulation_constraints domain_2 = { + .min_uV = 1800000, + .max_uV = 2000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, +}; + +regulator_set_platform_constraints("Regulator-1", &domain_1); +regulator_set_platform_constraints("Regulator-2", &domain_2); diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt new file mode 100644 index 0000000000000000000000000000000000000000..bdcb332bd7fbea329f23e6ce9b68dd761e8da2d8 --- /dev/null +++ b/Documentation/power/regulator/overview.txt @@ -0,0 +1,171 @@ +Linux voltage and current regulator framework +============================================= + +About +===== + +This framework is designed to provide a standard kernel interface to control +voltage and current regulators. + +The intention is to allow systems to dynamically control regulator power output +in order to save power and prolong battery life. This applies to both voltage +regulators (where voltage output is controllable) and current sinks (where +current limit is controllable). + +(C) 2008 Wolfson Microelectronics PLC. +Author: Liam Girdwood + + +Nomenclature +============ + +Some terms used in this document:- + + o Regulator - Electronic device that supplies power to other devices. + Most regulators can enable and disable their output whilst + some can control their output voltage and or current. + + Input Voltage -> Regulator -> Output Voltage + + + o PMIC - Power Management IC. An IC that contains numerous regulators + and often contains other susbsystems. + + + o Consumer - Electronic device that is supplied power by a regulator. + Consumers can be classified into two types:- + + Static: consumer does not change it's supply voltage or + current limit. It only needs to enable or disable it's + power supply. It's supply voltage is set by the hardware, + bootloader, firmware or kernel board initialisation code. + + Dynamic: consumer needs to change it's supply voltage or + current limit to meet operation demands. + + + o Power Domain - Electronic circuit that is supplied it's input power by the + output power of a regulator, switch or by another power + domain. + + The supply regulator may be behind a switch(s). i.e. + + Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A] + | | + | +-> [Consumer B], [Consumer C] + | + +-> [Consumer D], [Consumer E] + + That is one regulator and three power domains: + + Domain 1: Switch-1, Consumers D & E. + Domain 2: Switch-2, Consumers B & C. + Domain 3: Consumer A. + + and this represents a "supplies" relationship: + + Domain-1 --> Domain-2 --> Domain-3. + + A power domain may have regulators that are supplied power + by other regulators. i.e. + + Regulator-1 -+-> Regulator-2 -+-> [Consumer A] + | + +-> [Consumer B] + + This gives us two regulators and two power domains: + + Domain 1: Regulator-2, Consumer B. + Domain 2: Consumer A. + + and a "supplies" relationship: + + Domain-1 --> Domain-2 + + + o Constraints - Constraints are used to define power levels for performance + and hardware protection. Constraints exist at three levels: + + Regulator Level: This is defined by the regulator hardware + operating parameters and is specified in the regulator + datasheet. i.e. + + - voltage output is in the range 800mV -> 3500mV. + - regulator current output limit is 20mA @ 5V but is + 10mA @ 10V. + + Power Domain Level: This is defined in software by kernel + level board initialisation code. It is used to constrain a + power domain to a particular power range. i.e. + + - Domain-1 voltage is 3300mV + - Domain-2 voltage is 1400mV -> 1600mV + - Domain-3 current limit is 0mA -> 20mA. + + Consumer Level: This is defined by consumer drivers + dynamically setting voltage or current limit levels. + + e.g. a consumer backlight driver asks for a current increase + from 5mA to 10mA to increase LCD illumination. This passes + to through the levels as follows :- + + Consumer: need to increase LCD brightness. Lookup and + request next current mA value in brightness table (the + consumer driver could be used on several different + personalities based upon the same reference device). + + Power Domain: is the new current limit within the domain + operating limits for this domain and system state (e.g. + battery power, USB power) + + Regulator Domains: is the new current limit within the + regulator operating parameters for input/ouput voltage. + + If the regulator request passes all the constraint tests + then the new regulator value is applied. + + +Design +====== + +The framework is designed and targeted at SoC based devices but may also be +relevant to non SoC devices and is split into the following four interfaces:- + + + 1. Consumer driver interface. + + This uses a similar API to the kernel clock interface in that consumer + drivers can get and put a regulator (like they can with clocks atm) and + get/set voltage, current limit, mode, enable and disable. This should + allow consumers complete control over their supply voltage and current + limit. This also compiles out if not in use so drivers can be reused in + systems with no regulator based power control. + + See Documentation/power/regulator/consumer.txt + + 2. Regulator driver interface. + + This allows regulator drivers to register their regulators and provide + operations to the core. It also has a notifier call chain for propagating + regulator events to clients. + + See Documentation/power/regulator/regulator.txt + + 3. Machine interface. + + This interface is for machine specific code and allows the creation of + voltage/current domains (with constraints) for each regulator. It can + provide regulator constraints that will prevent device damage through + overvoltage or over current caused by buggy client drivers. It also + allows the creation of a regulator tree whereby some regulators are + supplied by others (similar to a clock tree). + + See Documentation/power/regulator/machine.txt + + 4. Userspace ABI. + + The framework also exports a lot of useful voltage/current/opmode data to + userspace via sysfs. This could be used to help monitor device power + consumption and status. + + See Documentation/ABI/testing/regulator-sysfs.txt diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt new file mode 100644 index 0000000000000000000000000000000000000000..a69050143592236cdcf39655027c30bb8aeccb47 --- /dev/null +++ b/Documentation/power/regulator/regulator.txt @@ -0,0 +1,30 @@ +Regulator Driver Interface +========================== + +The regulator driver interface is relatively simple and designed to allow +regulator drivers to register their services with the core framework. + + +Registration +============ + +Drivers can register a regulator by calling :- + +struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, + void *reg_data); + +This will register the regulators capabilities and operations the regulator +core. The core does not touch reg_data (private to regulator driver). + +Regulators can be unregistered by calling :- + +void regulator_unregister(struct regulator_dev *rdev); + + +Regulator Events +================ +Regulators can send events (e.g. over temp, under voltage, etc) to consumer +drivers by calling :- + +int regulator_notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data); diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index 3be84aa38dfe11fdeb544b76956ac4c01bfb0892..29d839ce7327a01ad8ba24437b8840dcf9b70919 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX @@ -20,8 +20,6 @@ mpc52xx-device-tree-bindings.txt - MPC5200 Device Tree Bindings ppc_htab.txt - info about the Linux/PPC /proc/ppc_htab entry -SBC8260_memory_mapping.txt - - EST SBC8260 board info smp.txt - use and state info about Linux/PPC on MP machines sound.txt diff --git a/Documentation/powerpc/SBC8260_memory_mapping.txt b/Documentation/powerpc/SBC8260_memory_mapping.txt deleted file mode 100644 index e6e9ee0506c3ee522cd63fc96179a1fcf4d68254..0000000000000000000000000000000000000000 --- a/Documentation/powerpc/SBC8260_memory_mapping.txt +++ /dev/null @@ -1,197 +0,0 @@ -Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com) -if you have questions, comments or corrections. - - * EST SBC8260 Linux memory mapping rules - - http://www.estc.com/ - http://www.estc.com/products/boards/SBC8260-8240_ds.html - - Initial conditions: - ------------------- - - Tasks that need to be perform by the boot ROM before control is - transferred to zImage (compressed Linux kernel): - - - Define the IMMR to 0xf0000000 - - - Initialize the memory controller so that RAM is available at - physical address 0x00000000. On the SBC8260 is this 16M (64M) - SDRAM. - - - The boot ROM should only clear the RAM that it is using. - - The reason for doing this is to enhances the chances of a - successful post mortem on a Linux panic. One of the first - items to examine is the 16k (LOG_BUF_LEN) circular console - buffer called log_buf which is defined in kernel/printk.c. - - - To enhance boot ROM performance, the I-cache can be enabled. - - Date: Mon, 22 May 2000 14:21:10 -0700 - From: Neil Russell - - LiMon (LInux MONitor) runs with and starts Linux with MMU - off, I-cache enabled, D-cache disabled. The I-cache doesn't - need hints from the MMU to work correctly as the D-cache - does. No D-cache means no special code to handle devices in - the presence of cache (no snooping, etc). The use of the - I-cache means that the monitor can run acceptably fast - directly from ROM, rather than having to copy it to RAM. - - - Build the board information structure (see - include/asm-ppc/est8260.h for its definition) - - - The compressed Linux kernel (zImage) contains a bootstrap loader - that is position independent; you can load it into any RAM, - ROM or FLASH memory address >= 0x00500000 (above 5 MB), or - at its link address of 0x00400000 (4 MB). - - Note: If zImage is loaded at its link address of 0x00400000 (4 MB), - then zImage will skip the step of moving itself to - its link address. - - - Load R3 with the address of the board information structure - - - Transfer control to zImage - - - The Linux console port is SMC1, and the baud rate is controlled - from the bi_baudrate field of the board information structure. - On thing to keep in mind when picking the baud rate, is that - there is no flow control on the SMC ports. I would stick - with something safe and standard like 19200. - - On the EST SBC8260, the SMC1 port is on the COM1 connector of - the board. - - - EST SBC8260 defaults: - --------------------- - - Chip - Memory Sel Bus Use - --------------------- --- --- ---------------------------------- - 0x00000000-0x03FFFFFF CS2 60x (16M or 64M)/64M SDRAM - 0x04000000-0x04FFFFFF CS4 local 4M/16M SDRAM (soldered to the board) - 0x21000000-0x21000000 CS7 60x 1B/64K Flash present detect (from the flash SIMM) - 0x21000001-0x21000001 CS7 60x 1B/64K Switches (read) and LEDs (write) - 0x22000000-0x2200FFFF CS5 60x 8K/64K EEPROM - 0xFC000000-0xFCFFFFFF CS6 60x 2M/16M flash (8 bits wide, soldered to the board) - 0xFE000000-0xFFFFFFFF CS0 60x 4M/16M flash (SIMM) - - Notes: - ------ - - - The chip selects can map 32K blocks and up (powers of 2) - - - The SDRAM machine can handled up to 128Mbytes per chip select - - - Linux uses the 60x bus memory (the SDRAM DIMM) for the - communications buffers. - - - BATs can map 128K-256Mbytes each. There are four data BATs and - four instruction BATs. Generally the data and instruction BATs - are mapped the same. - - - The IMMR must be set above the kernel virtual memory addresses, - which start at 0xC0000000. Otherwise, the kernel may crash as - soon as you start any threads or processes due to VM collisions - in the kernel or user process space. - - - Details from Dan Malek on 10/29/1999: - - The user application virtual space consumes the first 2 Gbytes - (0x00000000 to 0x7FFFFFFF). The kernel virtual text starts at - 0xC0000000, with data following. There is a "protection hole" - between the end of kernel data and the start of the kernel - dynamically allocated space, but this space is still within - 0xCxxxxxxx. - - Obviously the kernel can't map any physical addresses 1:1 in - these ranges. - - - Details from Dan Malek on 5/19/2000: - - During the early kernel initialization, the kernel virtual - memory allocator is not operational. Prior to this KVM - initialization, we choose to map virtual to physical addresses - 1:1. That is, the kernel virtual address exactly matches the - physical address on the bus. These mappings are typically done - in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c. Only - absolutely necessary mappings should be done at this time, for - example board control registers or a serial uart. Normal device - driver initialization should map resources later when necessary. - - Although platform dependent, and certainly the case for embedded - 8xx, traditionally memory is mapped at physical address zero, - and I/O devices above physical address 0x80000000. The lowest - and highest (above 0xf0000000) I/O addresses are traditionally - used for devices or registers we need to map during kernel - initialization and prior to KVM operation. For this reason, - and since it followed prior PowerPC platform examples, I chose - to map the embedded 8xx kernel to the 0xc0000000 virtual address. - This way, we can enable the MMU to map the kernel for proper - operation, and still map a few windows before the KVM is operational. - - On some systems, you could possibly run the kernel at the - 0x80000000 or any other virtual address. It just depends upon - mapping that must be done prior to KVM operational. You can never - map devices or kernel spaces that overlap with the user virtual - space. This is why default IMMR mapping used by most BDM tools - won't work. They put the IMMR at something like 0x10000000 or - 0x02000000 for example. You simply can't map these addresses early - in the kernel, and continue proper system operation. - - The embedded 8xx/82xx kernel is mature enough that all you should - need to do is map the IMMR someplace at or above 0xf0000000 and it - should boot far enough to get serial console messages and KGDB - connected on any platform. There are lots of other subtle memory - management design features that you simply don't need to worry - about. If you are changing functions related to MMU initialization, - you are likely breaking things that are known to work and are - heading down a path of disaster and frustration. Your changes - should be to make the flexibility of the processor fit Linux, - not force arbitrary and non-workable memory mappings into Linux. - - - You don't want to change KERNELLOAD or KERNELBASE, otherwise the - virtual memory and MMU code will get confused. - - arch/ppc/Makefile:KERNELLOAD = 0xc0000000 - - include/asm-ppc/page.h:#define PAGE_OFFSET 0xc0000000 - include/asm-ppc/page.h:#define KERNELBASE PAGE_OFFSET - - - RAM is at physical address 0x00000000, and gets mapped to - virtual address 0xC0000000 for the kernel. - - - Physical addresses used by the Linux kernel: - -------------------------------------------- - - 0x00000000-0x3FFFFFFF 1GB reserved for RAM - 0xF0000000-0xF001FFFF 128K IMMR 64K used for dual port memory, - 64K for 8260 registers - - - Logical addresses used by the Linux kernel: - ------------------------------------------- - - 0xF0000000-0xFFFFFFFF 256M BAT0 (IMMR: dual port RAM, registers) - 0xE0000000-0xEFFFFFFF 256M BAT1 (I/O space for custom boards) - 0xC0000000-0xCFFFFFFF 256M BAT2 (RAM) - 0xD0000000-0xDFFFFFFF 256M BAT3 (if RAM > 256MByte) - - - EST SBC8260 Linux mapping: - -------------------------- - - DBAT0, IBAT0, cache inhibited: - - Chip - Memory Sel Use - --------------------- --- --------------------------------- - 0xF0000000-0xF001FFFF n/a IMMR: dual port RAM, registers - - DBAT1, IBAT1, cache inhibited: - diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index ea1b70b357936b6e32ebfb8e3c7ae180f45f9209..de4063cb4fdc0ad6abea29d766cae78616837311 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -59,6 +59,7 @@ Table of Contents p) Freescale Synchronous Serial Interface q) USB EHCI controllers r) MDIO on GPIOs + s) SPI busses VII - Marvell Discovery mv64[345]6x System Controller chips 1) The /system-controller node @@ -277,7 +278,7 @@ it with special cases. a 64-bit platform. d) request and get assigned a platform number (see PLATFORM_* - constants in include/asm-powerpc/processor.h + constants in arch/powerpc/include/asm/processor.h 32-bit embedded kernels: @@ -339,7 +340,7 @@ the block to RAM before passing it to the kernel. --------- The kernel is entered with r3 pointing to an area of memory that is - roughly described in include/asm-powerpc/prom.h by the structure + roughly described in arch/powerpc/include/asm/prom.h by the structure boot_param_header: struct boot_param_header { @@ -707,7 +708,7 @@ device or bus to be described by the device tree. In general, the format of an address for a device is defined by the parent bus type, based on the #address-cells and #size-cells properties. Note that the parent's parent definitions of #address-cells -and #size-cells are not inhereted so every node with children must specify +and #size-cells are not inherited so every node with children must specify them. The kernel requires the root node to have those properties defining addresses format for devices directly mapped on the processor bus. @@ -1776,7 +1777,7 @@ platforms are moved over to use the flattened-device-tree model. Xilinx uartlite devices are simple fixed speed serial ports. - Requred properties: + Required properties: - current-speed : Baud rate of uartlite v) Xilinx hwicap @@ -1798,7 +1799,7 @@ platforms are moved over to use the flattened-device-tree model. Xilinx UART 16550 devices are very similar to the NS16550 but with different register spacing and an offset from the base address. - Requred properties: + Required properties: - clock-frequency : Frequency of the clock input - reg-offset : A value of 3 is required - reg-shift : A value of 2 is required @@ -1883,6 +1884,62 @@ platforms are moved over to use the flattened-device-tree model. &qe_pio_c 6>; }; + s) SPI (Serial Peripheral Interface) busses + + SPI busses can be described with a node for the SPI master device + and a set of child nodes for each SPI slave on the bus. For this + discussion, it is assumed that the system's SPI controller is in + SPI master mode. This binding does not describe SPI controllers + in slave mode. + + The SPI master node requires the following properties: + - #address-cells - number of cells required to define a chip select + address on the SPI bus. + - #size-cells - should be zero. + - compatible - name of SPI bus controller following generic names + recommended practice. + No other properties are required in the SPI bus node. It is assumed + that a driver for an SPI bus device will understand that it is an SPI bus. + However, the binding does not attempt to define the specific method for + assigning chip select numbers. Since SPI chip select configuration is + flexible and non-standardized, it is left out of this binding with the + assumption that board specific platform code will be used to manage + chip selects. Individual drivers can define additional properties to + support describing the chip select layout. + + SPI slave nodes must be children of the SPI master node and can + contain the following properties. + - reg - (required) chip select address of device. + - compatible - (required) name of SPI device following generic names + recommended practice + - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz + - spi-cpol - (optional) Empty property indicating device requires + inverse clock polarity (CPOL) mode + - spi-cpha - (optional) Empty property indicating device requires + shifted clock phase (CPHA) mode + + SPI example for an MPC5200 SPI bus: + spi@f00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + interrupt-parent = <&mpc5200_pic>; + + ethernet-switch@0 { + compatible = "micrel,ks8995m"; + spi-max-frequency = <1000000>; + reg = <0>; + }; + + codec@1 { + compatible = "ti,tlv320aic26"; + spi-max-frequency = <100000>; + reg = <1>; + }; + }; + VII - Marvell Discovery mv64[345]6x System Controller chips =========================================================== @@ -1896,7 +1953,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. 1) The /system-controller node This node is used to represent the system-controller and must be - present when the system uses a system contller chip. The top-level + present when the system uses a system controller chip. The top-level system-controller node contains information that is global to all devices within the system controller chip. The node name begins with "system-controller" followed by the unit address, which is diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt index b35f3482e3e4dc73574ae0dd7f3ec9474aec8f9a..2ea76d9d137c56fc41a160b534612a3542ba94b9 100644 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt @@ -7,6 +7,15 @@ Currently defined compatibles: - fsl,cpm2-scc-uart - fsl,qe-uart +Modem control lines connected to GPIO controllers are listed in the gpios +property as described in booting-without-of.txt, section IX.1 in the following +order: + +CTS, RTS, DCD, DSR, DTR, and RI. + +The gpios property is optional and can be left out when control lines are +not used. + Example: serial@11a00 { @@ -18,4 +27,6 @@ Example: interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; fsl,cpm-command = <00800000>; + gpios = <&gpio_c 15 0 + &gpio_d 29 0>; }; diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.txt index df7afe43d46286a1c0cb50bb95269e7d7c99e7d6..9d4e33df624c2390e03cc75cdbf245e50bca1294 100644 --- a/Documentation/powerpc/eeh-pci-error-recovery.txt +++ b/Documentation/powerpc/eeh-pci-error-recovery.txt @@ -133,7 +133,7 @@ error. Given an arbitrary address, the routine pci_get_device_by_addr() will find the pci device associated with that address (if any). -The default include/asm-powerpc/io.h macros readb(), inb(), insb(), +The default arch/powerpc/include/asm/io.h macros readb(), inb(), insb(), etc. include a check to see if the i/o read returned all-0xff's. If so, these make a call to eeh_dn_check_failure(), which in turn asks the firmware if the all-ff's value is the sign of a true EEH diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt index 896266432d3363e23ce874600293504e6c396f6a..06da4d4b44f9c0d3f81bcbddb01ccc5c76ae01d8 100644 --- a/Documentation/powerpc/qe_firmware.txt +++ b/Documentation/powerpc/qe_firmware.txt @@ -217,7 +217,7 @@ Although it is not recommended, you can specify '0' in the soc.model field to skip matching SOCs altogether. The 'model' field is a 16-bit number that matches the actual SOC. The -'major' and 'minor' fields are the major and minor revision numbrs, +'major' and 'minor' fields are the major and minor revision numbers, respectively, of the SOC. For example, to match the 8323, revision 1.0: diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 0843ed0163a5810fc564844b1929cf4fbe7673eb..28b6ec87c64209b10a83dfe1a7bfcebf6f231991 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -390,9 +390,10 @@ rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft rfkill input line is active. Only if none of the rfkill input lines are active, will it return RFKILL_STATE_UNBLOCKED. -If it doesn't implement the get_state() hook, it must make sure that its calls -to rfkill_force_state() are enough to keep the status always up-to-date, and it -must do a rfkill_force_state() on resume from sleep. +Since the device has a hardware rfkill line, it IS subject to state changes +external to rfkill. Therefore, the driver must make sure that it calls +rfkill_force_state() to keep the status always up-to-date, and it must do a +rfkill_force_state() on resume from sleep. Every time the driver gets a notification from the card that one of its rfkill lines changed state (polling might be needed on badly designed cards that don't @@ -422,13 +423,24 @@ of the hardware is unknown), or read-write (where the hardware can be queried about its current state). The rfkill class will call the get_state hook of a device every time it needs -to know the *real* current state of the hardware. This can happen often. +to know the *real* current state of the hardware. This can happen often, but +it does not do any polling, so it is not enough on hardware that is subject +to state changes outside of the rfkill subsystem. + +Therefore, calling rfkill_force_state() when a state change happens is +mandatory when the device has a hardware rfkill line, or when something else +like the firmware could cause its state to be changed without going through the +rfkill class. Some hardware provides events when its status changes. In these cases, it is best for the driver to not provide a get_state hook, and instead register the rfkill class *already* with the correct status, and keep it updated using rfkill_force_state() when it gets an event from the hardware. +rfkill_force_state() must be used on the device resume handlers to update the +rfkill status, should there be any chance of the device status changing during +the sleep. + There is no provision for a statically-allocated rfkill struct. You must use rfkill_allocate() to allocate one. diff --git a/Documentation/s390/driver-model.txt b/Documentation/s390/driver-model.txt index e938c442277dc0ecd1b05002ba9167abbedd914c..bde473df748dc95ca903bcadd2155a7def8ed4c4 100644 --- a/Documentation/s390/driver-model.txt +++ b/Documentation/s390/driver-model.txt @@ -25,7 +25,7 @@ device 4711 via subchannel 1 in subchannel set 0, and subchannel 2 is a non-I/O subchannel. Device 1234 is accessed via subchannel 0 in subchannel set 1. The subchannel named 'defunct' does not represent any real subchannel on the -system; it is a pseudo subchannel where disconnnected ccw devices are moved to +system; it is a pseudo subchannel where disconnected ccw devices are moved to if they are displaced by another ccw device becoming operational on their former subchannel. The ccw devices will be moved again to a proper subchannel if they become operational again on that subchannel. diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt index a810421f1fb3dfab2e256bcb097db6b1fbc484d9..3920f28710c4fcd224fee28bc6959dc192346829 100644 --- a/Documentation/scsi/ibmmca.txt +++ b/Documentation/scsi/ibmmca.txt @@ -524,7 +524,7 @@ - Michael Lang June 25 1997: (v1.8b) - 1) Some cosmetical changes for the handling of SCSI-device-types. + 1) Some cosmetic changes for the handling of SCSI-device-types. Now, also CD-Burners / WORMs and SCSI-scanners should work. For MO-drives I have no experience, therefore not yet supported. In logical_devices I changed from different type-variables to one @@ -914,7 +914,7 @@ in version 4.0. This was never really necessary, as all troubles were based on non-command related reasons up to now, so bypassing commands did not help to avoid any bugs. It is kept in 3.2X for debugging reasons. - 5) Dynamical reassignment of ldns was again verified and analyzed to be + 5) Dynamic reassignment of ldns was again verified and analyzed to be completely inoperational. This is corrected and should work now. 6) All commands that get sent to the SCSI adapter were verified and completed in such a way, that they are now completely conform to the @@ -1386,7 +1386,7 @@ concerning the Linux-kernel in special, this SCSI-driver comes without any warranty. Its functionality is tested as good as possible on certain machines and combinations of computer hardware, which does not exclude, - that dataloss or severe damage of hardware is possible while using this + that data loss or severe damage of hardware is possible while using this part of software on some arbitrary computer hardware or in combination with other software packages. It is highly recommended to make backup copies of your data before using this software. Furthermore, personal diff --git a/Documentation/scsi/lpfc.txt b/Documentation/scsi/lpfc.txt index 4dbe41370a6d6056657da648d20dd7d18576d15d..5741ea8aa88a9e23b495819249fddad5e6c3def0 100644 --- a/Documentation/scsi/lpfc.txt +++ b/Documentation/scsi/lpfc.txt @@ -36,7 +36,7 @@ Cable pull and temporary device Loss: being removed, a switch rebooting, or a device reboot), the driver could hide the disappearance of the device from the midlayer. I/O's issued to the LLDD would simply be queued for a short duration, allowing the device - to reappear or link come back alive, with no inadvertant side effects + to reappear or link come back alive, with no inadvertent side effects to the system. If the driver did not hide these conditions, i/o would be errored by the driver, the mid-layer would exhaust its retries, and the device would be taken offline. Manual intervention would be required to diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt index d403e46d8463e14fecfd6fc105a119608692d207..75143f0c23b685f95292c2764172350adacafcc8 100644 --- a/Documentation/scsi/scsi_fc_transport.txt +++ b/Documentation/scsi/scsi_fc_transport.txt @@ -65,7 +65,7 @@ Overview: discussion will concentrate on NPIV. Note: World Wide Name assignment (and uniqueness guarantees) are left - up to an administrative entity controling the vport. For example, + up to an administrative entity controlling the vport. For example, if vports are to be associated with virtual machines, a XEN mgmt utility would be responsible for creating wwpn/wwnn's for the vport, using it's own naming authority and OUI. (Note: it already does this @@ -91,7 +91,7 @@ Device Trees and Vport Objects: Here's what to expect in the device tree : The typical Physical Port's Scsi_Host: /sys/devices/.../host17/ - and it has the typical decendent tree: + and it has the typical descendant tree: /sys/devices/.../host17/rport-17:0-0/target17:0:0/17:0:0:0: and then the vport is created on the Physical Port: /sys/devices/.../host17/vport-17:0-0 @@ -192,7 +192,7 @@ Vport States: independent of the adapter's link state. - Instantiation of the vport on the FC link via ELS traffic, etc. This is equivalent to a "link up" and successfull link initialization. - Futher information can be found in the interfaces section below for + Further information can be found in the interfaces section below for Vport Creation. Once a vport has been instantiated with the kernel/LLDD, a vport state diff --git a/Documentation/sh/clk.txt b/Documentation/sh/clk.txt index 9aef710e9a4b5aa881fa6574ee3fcf9c2406c79f..114b595cfa978a2d17c1cced940043732d7fe333 100644 --- a/Documentation/sh/clk.txt +++ b/Documentation/sh/clk.txt @@ -12,7 +12,7 @@ means no changes to adjanced clock Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method, if it is present in ops structure. The method should set the clock rate and adjust all needed clocks according to the passed algo_id. -Exact values for algo_id are machine-dependend. For the sh7722, the following +Exact values for algo_id are machine-dependent. For the sh7722, the following values are defined: NO_CHANGE = 0, diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 72aff61e731509d7c87f3a3913aa3b4e965ab9c5..6f6d117ac7e22cd2d9fc981f0fc8542d824d1db8 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1024,6 +1024,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. intel-mac-v3 Intel Mac Type 3 intel-mac-v4 Intel Mac Type 4 intel-mac-v5 Intel Mac Type 5 + intel-mac-auto Intel Mac (detect type according to subsystem id) macmini Intel Mac Mini (equivalent with type 3) macbook Intel Mac Book (eq. type 5) macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3) diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt index 2ad5e6306c445bd369bb5346bf18da6156382bca..a4c53d8961e1ca1c57686ac9560bece125fed03a 100644 --- a/Documentation/sound/alsa/Audiophile-Usb.txt +++ b/Documentation/sound/alsa/Audiophile-Usb.txt @@ -236,15 +236,15 @@ The parameter can be given: alias snd-card-1 snd-usb-audio options snd-usb-audio index=1 device_setup=0x09 -CAUTION when initializaing the device +CAUTION when initializing the device ------------------------------------- * Correct initialization on the device requires that device_setup is given to the module BEFORE the device is turned on. So, if you use the "manual probing" method described above, take care to power-on the device AFTER this initialization. - * Failing to respect this will lead in a misconfiguration of the device. In this case - turn off the device, unproble the snd-usb-audio module, then probe it again with + * Failing to respect this will lead to a misconfiguration of the device. In this case + turn off the device, unprobe the snd-usb-audio module, then probe it again with correct device_setup parameter and then (and only then) turn on the device again. * If you've correctly initialized the device in a valid mode and then want to switch @@ -388,9 +388,9 @@ There are 2 main potential issues when using Jackd with the device: Jack supports big endian devices only in recent versions (thanks to Andreas Steinmetz for his first big-endian patch). I can't remember -extacly when this support was released into jackd, let's just say that +exactly when this support was released into jackd, let's just say that with jackd version 0.103.0 it's almost ok (just a small bug is affecting -16bits Big-Endian devices, but since you've read carefully the above +16bits Big-Endian devices, but since you've read carefully the above paragraphs, you're now using kernel >= 2.6.23 and your 16bits devices are now Little Endians ;-) ). diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt index 8e1b02526698c55da2c8da8964f480a108a53cb2..34e87ec1379c8e6af81d90608125628535ad107a 100644 --- a/Documentation/sound/alsa/hda_codec.txt +++ b/Documentation/sound/alsa/hda_codec.txt @@ -67,7 +67,7 @@ CONFIG_SND_HDA_POWER_SAVE kconfig. It's called when the codec needs to power up or may power down. The controller should check the all belonging codecs on the bus whether they are actually powered off (check codec->power_on), and optionally the driver may power down the -contoller side, too. +controller side, too. The bus instance is created via snd_hda_bus_new(). You need to pass the card instance, the template, and the pointer to store the diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt index c784a18b94dce93bdcb064b2ef6670d450846bd5..b2ed6983f40d21483cfcbbd1e634533ca64e4115 100644 --- a/Documentation/sound/alsa/soc/dapm.txt +++ b/Documentation/sound/alsa/soc/dapm.txt @@ -68,7 +68,7 @@ Audio DAPM widgets fall into a number of types:- (Widgets are defined in include/sound/soc-dapm.h) Widgets are usually added in the codec driver and the machine driver. There are -convience macros defined in soc-dapm.h that can be used to quickly build a +convenience macros defined in soc-dapm.h that can be used to quickly build a list of widgets of the codecs and machines DAPM widgets. Most widgets have a name, register, shift and invert. Some widgets have extra diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt index 1a3bdc27d95e98ce49c07791b02515e38ef678a5..42f43fa59f24c75c1f553dc5078f88b949302fd9 100644 --- a/Documentation/sparse.txt +++ b/Documentation/sparse.txt @@ -73,10 +73,10 @@ recompiled, or use "make C=2" to run sparse on the files whether they need to be recompiled or not. The latter is a fast way to check the whole tree if you have already built it. -The optional make variable CHECKFLAGS can be used to pass arguments to sparse. -The build system passes -Wbitwise to sparse automatically. To perform -endianness checks, you may define __CHECK_ENDIAN__: +The optional make variable CF can be used to pass arguments to sparse. The +build system passes -Wbitwise to sparse automatically. To perform endianness +checks, you may define __CHECK_ENDIAN__: - make C=2 CHECKFLAGS="-D__CHECK_ENDIAN__" + make C=2 CF="-D__CHECK_ENDIAN__" These checks are disabled by default as they generate a host of warnings. diff --git a/Documentation/spi/Makefile b/Documentation/spi/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..a5b03c88beae2a7d81672a33d312ae13fdcd096a --- /dev/null +++ b/Documentation/spi/Makefile @@ -0,0 +1,11 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := spidev_test spidev_fdx + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include +HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx index f3853cc37bde387e4608c27833e4653aa3811d3b..bbe8dee681a5d2b9a503d7f59b22e79d7a3e9014 100644 --- a/Documentation/spi/pxa2xx +++ b/Documentation/spi/pxa2xx @@ -19,7 +19,7 @@ Declaring PXA2xx Master Controllers ----------------------------------- Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a "platform device". The master configuration is passed to the driver via a table -found in include/asm-arm/arch-pxa/pxa2xx_spi.h: +found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h: struct pxa2xx_spi_master { enum pxa_ssp_type ssp_type; @@ -94,7 +94,7 @@ using the "spi_board_info" structure found in "linux/spi/spi.h". See Each slave device attached to the PXA must provide slave specific configuration information via the structure "pxa2xx_spi_chip" found in -"include/asm-arm/arch-pxa/pxa2xx_spi.h". The pxa2xx_spi master controller driver +"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h". The pxa2xx_spi master controller driver will uses the configuration whenever the driver communicates with the slave device. diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 6d5f18143c5038b30a8e522f078fd74362855b02..8bae2f018d342cf6f027ec5a2dc3ace9ad709bb8 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -210,7 +210,7 @@ board should normally be set up and registered. So for example arch/.../mach-*/board-*.c files might have code like: - #include /* for mysoc_spi_data */ + #include /* for mysoc_spi_data */ /* if your mach-* infrastructure doesn't support kernels that can * run on multiple boards, pdata wouldn't benefit from "__init". @@ -227,7 +227,7 @@ So for example arch/.../mach-*/board-*.c files might have code like: And SOC-specific utility code might look something like: - #include + #include static struct platform_device spi2 = { ... }; diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 8a4863c4edd4c2463ac7fe5a5a492ac5156c9932..d79eeda7a699cbeb72ad0a03332388f8d8a68eeb 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -116,7 +116,7 @@ of kilobytes free. The VM uses this number to compute a pages_min value for each lowmem zone in the system. Each lowmem zone gets a number of reserved free pages based proportionally on its size. -Some minimal ammount of memory is needed to satisfy PF_MEMALLOC +Some minimal amount of memory is needed to satisfy PF_MEMALLOC allocations; if you set this to lower than 1024KB, your system will become subtly broken, and prone to deadlock under high loads. diff --git a/Documentation/timers/highres.txt b/Documentation/timers/highres.txt index a73ecf5b4bdb80c6b9977332d89b3eebc479e5c0..21332233cef16a157b95519640e356beadf2eeee 100644 --- a/Documentation/timers/highres.txt +++ b/Documentation/timers/highres.txt @@ -125,7 +125,7 @@ increase of flexibility and the avoidance of duplicated code across architectures justifies the slight increase of the binary size. The conversion of an architecture has no functional impact, but allows to -utilize the high resolution and dynamic tick functionalites without any change +utilize the high resolution and dynamic tick functionalities without any change to the clock event device and timer interrupt code. After the conversion the enabling of high resolution timers and dynamic ticks is simply provided by adding the kernel/time/Kconfig file to the architecture specific Kconfig and diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/unaligned-memory-access.txt index b0472ac5226a38ff2f740c185dcfdd5676dbcf97..f866c72291bf4ce2e29a9a6ffd1c40ac740d4bb7 100644 --- a/Documentation/unaligned-memory-access.txt +++ b/Documentation/unaligned-memory-access.txt @@ -218,9 +218,35 @@ If use of such macros is not convenient, another option is to use memcpy(), where the source or destination (or both) are of type u8* or unsigned char*. Due to the byte-wise nature of this operation, unaligned accesses are avoided. + +Alignment vs. Networking +======================== + +On architectures that require aligned loads, networking requires that the IP +header is aligned on a four-byte boundary to optimise the IP stack. For +regular ethernet hardware, the constant NET_IP_ALIGN is used. On most +architectures this constant has the value 2 because the normal ethernet +header is 14 bytes long, so in order to get proper alignment one needs to +DMA to an address which can be expressed as 4*n + 2. One notable exception +here is powerpc which defines NET_IP_ALIGN to 0 because DMA to unaligned +addresses can be very expensive and dwarf the cost of unaligned loads. + +For some ethernet hardware that cannot DMA to unaligned addresses like +4*n+2 or non-ethernet hardware, this can be a problem, and it is then +required to copy the incoming frame into an aligned buffer. Because this is +unnecessary on architectures that can do unaligned accesses, the code can be +made dependent on CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS like so: + +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + skb = original skb +#else + skb = copy skb +#endif + -- -Author: Daniel Drake +Authors: Daniel Drake , + Johannes Berg With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt, -Johannes Berg, Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, -Uli Kunitz, Vadim Lobanov +Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, Uli Kunitz, +Vadim Lobanov diff --git a/Documentation/usb/auerswald.txt b/Documentation/usb/auerswald.txt deleted file mode 100644 index 7ee4d8f69116f7e6adc9919886b5ad63dd68a2bb..0000000000000000000000000000000000000000 --- a/Documentation/usb/auerswald.txt +++ /dev/null @@ -1,30 +0,0 @@ - Auerswald USB kernel driver - =========================== - -What is it? What can I do with it? -================================== -The auerswald USB kernel driver connects your linux 2.4.x -system to the auerswald usb-enabled devices. - -There are two types of auerswald usb devices: -a) small PBX systems (ISDN) -b) COMfort system telephones (ISDN) - -The driver installation creates the devices -/dev/usb/auer0..15. These devices carry a vendor- -specific protocol. You may run all auerswald java -software on it. The java software needs a native -library "libAuerUsbJNINative.so" installed on -your system. This library is available from -auerswald and shipped as part of the java software. - -You may create the devices with: - mknod -m 666 /dev/usb/auer0 c 180 112 - ... - mknod -m 666 /dev/usb/auer15 c 180 127 - -Future plans -============ -- Connection to ISDN4LINUX (the hisax interface) - -The maintainer of this driver is wolfgang@iksw-muees.de diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt index 2af400609498d7c3d4bb33ad7c4a253973af3a4a..381b22ee7834bd2d7b0485570ea9a6caa0a5c587 100644 --- a/Documentation/usb/authorization.txt +++ b/Documentation/usb/authorization.txt @@ -8,7 +8,7 @@ not) in a system. This feature will allow you to implement a lock-down of USB devices, fully controlled by user space. As of now, when a USB device is connected it is configured and -it's interfaces inmediately made available to the users. With this +its interfaces are immediately made available to the users. With this modification, only if root authorizes the device to be configured will then it be possible to use it. diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index b2fc4d4a99177be7bd48dce560d1f28417c60aa9..9d31140e3f5bc2db17e446b426a4ecfacbbf99fc 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -436,7 +436,12 @@ post_reset; the USB core guarantees that this is true of internal suspend/resume events as well. If a driver wants to block all suspend/resume calls during some -critical section, it can simply acquire udev->pm_mutex. +critical section, it can simply acquire udev->pm_mutex. Note that +calls to resume may be triggered indirectly. Block IO due to memory +allocations can make the vm subsystem resume a device. Thus while +holding this lock you must not allocate memory with GFP_KERNEL or +GFP_NOFS. + Alternatively, if the critical section might call some of the usb_autopm_* routines, the driver can avoid deadlock by doing: diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828 index 86d1c8e7b18f3c31b39dca8176acc3e9bdfdf96a..eedc399e8debd741fc8fb33e25f5a0d55393030f 100644 --- a/Documentation/video4linux/CARDLIST.au0828 +++ b/Documentation/video4linux/CARDLIST.au0828 @@ -2,3 +2,4 @@ 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008] 2 -> Hauppauge HVR850 (au0828) [2040:7240] 3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620] + 4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281] diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 10591467ef166aef609c2b527de16c9d17ca1ff1..89c7f32abf9f2d8a43f98dc892b8ca9b8bad9a24 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -1,11 +1,11 @@ 0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800] - 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2750,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] + 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] 2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036] 3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208] 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201] 5 -> MSI VOX USB 2.0 (em2820/em2840) 6 -> Terratec Cinergy 200 USB (em2800) - 7 -> Leadtek Winfast USB II (em2800) + 7 -> Leadtek Winfast USB II (em2800) [0413:6023] 8 -> Kworld USB2800 (em2800) 9 -> Pinnacle Dazzle DVC 90/DVC 100 (em2820/em2840) [2304:0207,2304:021a] 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500] @@ -14,7 +14,46 @@ 13 -> Terratec Prodigy XS (em2880) [0ccd:0047] 14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) 15 -> V-Gear PocketTV (em2800) - 16 -> Hauppauge WinTV HVR 950 (em2880) [2040:6513,2040:6517,2040:651b,2040:651f] + 16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b,2040:651f] 17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227] 18 -> Hauppauge WinTV HVR 900 (R2) (em2880) [2040:6502] 19 -> PointNix Intra-Oral Camera (em2860) + 20 -> AMD ATI TV Wonder HD 600 (em2880) [0438:b002] + 21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800) [eb1a:2801] + 22 -> Unknown EM2750/EM2751 webcam grabber (em2750) [eb1a:2750,eb1a:2751] + 23 -> Huaqi DLCW-130 (em2750) + 24 -> D-Link DUB-T210 TV Tuner (em2820/em2840) [2001:f112] + 25 -> Gadmei UTV310 (em2820/em2840) + 26 -> Hercules Smart TV USB 2.0 (em2820/em2840) + 27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) (em2820/em2840) + 28 -> Leadtek Winfast USB II Deluxe (em2820/em2840) + 29 -> Pinnacle Dazzle DVC 100 (em2820/em2840) + 30 -> Videology 20K14XUSB USB2.0 (em2820/em2840) + 31 -> Usbgear VD204v9 (em2821) + 32 -> Supercomp USB 2.0 TV (em2821) + 33 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0 (em2821) + 34 -> Terratec Cinergy A Hybrid XS (em2860) [0ccd:004f] + 35 -> Typhoon DVD Maker (em2860) + 36 -> NetGMBH Cam (em2860) + 37 -> Gadmei UTV330 (em2860) + 38 -> Yakumo MovieMixer (em2861) + 39 -> KWorld PVRTV 300U (em2861) [eb1a:e300] + 40 -> Plextor ConvertX PX-TV100U (em2861) [093b:a005] + 41 -> Kworld 350 U DVB-T (em2870) [eb1a:e350] + 42 -> Kworld 355 U DVB-T (em2870) [eb1a:e355,eb1a:e357] + 43 -> Terratec Cinergy T XS (em2870) [0ccd:0043] + 44 -> Terratec Cinergy T XS (MT2060) (em2870) + 45 -> Pinnacle PCTV DVB-T (em2870) + 46 -> Compro, VideoMate U3 (em2870) [185b:2870] + 47 -> KWorld DVB-T 305U (em2880) [eb1a:e305] + 48 -> KWorld DVB-T 310U (em2880) + 49 -> MSI DigiVox A/D (em2880) [eb1a:e310] + 50 -> MSI DigiVox A/D II (em2880) [eb1a:e320] + 51 -> Terratec Hybrid XS Secam (em2880) [0ccd:004c] + 52 -> DNT DA2 Hybrid (em2881) + 53 -> Pinnacle Hybrid Pro (em2881) + 54 -> Kworld VS-DVB-T 323UR (em2882) [eb1a:e323] + 55 -> Terratec Hybrid XS (em2882) (em2882) [0ccd:005e] + 56 -> Pinnacle Hybrid Pro (2) (em2882) [2304:0226] + 57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316] + 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] diff --git a/Documentation/video4linux/Makefile b/Documentation/video4linux/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..1ed0e98d057d0e34fce4c96d778a30d4f0845111 --- /dev/null +++ b/Documentation/video4linux/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := v4lgrab + +# Tell kbuild to always build the programs +always := $(hostprogs-y) diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 0c4880af57a337d597baf871cb4926f48bfffd76..78a863ab8a5ac0d99c212065d91d7e1dde2dc0c5 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -1,4 +1,4 @@ -List of the webcams know by gspca. +List of the webcams known by gspca. The modules are: gspca_main main driver @@ -226,6 +226,7 @@ sonixj 0c45:6130 Sonix Pccam sonixj 0c45:6138 Sn9c120 Mo4000 sonixj 0c45:613b Surfer SN-206 sonixj 0c45:613c Sonix Pccam168 +sonixj 0c45:6143 Sonix Pccam168 sunplus 0d64:0303 Sunplus FashionCam DXG etoms 102c:6151 Qcam Sangha CIF etoms 102c:6251 Qcam xxxxxx VGA diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt index b26f5195af51f58db1d4a04f2826e044b29bc8a2..73de4050d63738dd15c4d3872e3ca49d5e5e089d 100644 --- a/Documentation/video4linux/sn9c102.txt +++ b/Documentation/video4linux/sn9c102.txt @@ -157,7 +157,7 @@ Loading can be done as shown below: [root@localhost home]# modprobe sn9c102 -Note that the module is called "sn9c102" for historic reasons, althought it +Note that the module is called "sn9c102" for historic reasons, although it does not just support the SN9C102. At this point all the devices supported by the driver and connected to the USB diff --git a/Documentation/vm/Makefile b/Documentation/vm/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..6f562f778b289e48f51e4b0e7b1740c89f4ff683 --- /dev/null +++ b/Documentation/vm/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := slabinfo + +# Tell kbuild to always build the programs +always := $(hostprogs-y) diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index 3102b81bef88d86b753449e86f1d65f6d04c7ea8..ea8714fcc3ad4882dba62d625d22e61ac0a3079f 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -77,7 +77,7 @@ memory that is preset in system at this time. System administrators may want to put this command in one of the local rc init files. This will enable the kernel to request huge pages early in the boot process (when the possibility of getting physical contiguous pages is still very high). In either -case, adminstrators will want to verify the number of hugepages actually +case, administrators will want to verify the number of hugepages actually allocated by checking the sysctl or meminfo. /proc/sys/vm/nr_overcommit_hugepages indicates how large the pool of @@ -95,6 +95,29 @@ this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. +With support for multiple hugepage pools at run-time available, much of +the hugepage userspace interface has been duplicated in sysfs. The above +information applies to the default hugepage size (which will be +controlled by the proc interfaces for backwards compatibility). The root +hugepage control directory is + + /sys/kernel/mm/hugepages + +For each hugepage size supported by the running kernel, a subdirectory +will exist, of the form + + hugepages-${size}kB + +Inside each of these directories, the same set of files will exist: + + nr_hugepages + nr_overcommit_hugepages + free_hugepages + resv_hugepages + surplus_hugepages + +which function as described above for the default hugepage-sized case. + If the user applications are going to request hugepages using mmap system call, then it is required that system administrator mount a file system of type hugetlbfs: diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt index bad16d3f6a473afe913b0be76e783bcb946bc937..6aaaeb38730cf0ff1d5389cd73a6a8d2fb6bd413 100644 --- a/Documentation/vm/numa_memory_policy.txt +++ b/Documentation/vm/numa_memory_policy.txt @@ -58,7 +58,7 @@ most general to most specific: the policy at the time they were allocated. VMA Policy: A "VMA" or "Virtual Memory Area" refers to a range of a task's - virtual adddress space. A task may define a specific policy for a range + virtual address space. A task may define a specific policy for a range of its virtual address space. See the MEMORY POLICIES APIS section, below, for an overview of the mbind() system call used to set a VMA policy. @@ -353,7 +353,7 @@ follows: Because of this extra reference counting, and because we must lookup shared policies in a tree structure under spinlock, shared policies are - more expensive to use in the page allocation path. This is expecially + more expensive to use in the page allocation path. This is especially true for shared policies on shared memory regions shared by tasks running on different NUMA nodes. This extra overhead can be avoided by always falling back to task or system default policy for shared memory regions, diff --git a/Documentation/volatile-considered-harmful.txt b/Documentation/volatile-considered-harmful.txt index 10c2e411cca899558b998e8bed0d3239d4cc92a6..991c26a6ef64fcfdef0fc870d3ed404f55751407 100644 --- a/Documentation/volatile-considered-harmful.txt +++ b/Documentation/volatile-considered-harmful.txt @@ -114,6 +114,6 @@ CREDITS Original impetus and research by Randy Dunlap Written by Jonathan Corbet -Improvements via coments from Satyam Sharma, Johannes Stezenbach, Jesper +Improvements via comments from Satyam Sharma, Johannes Stezenbach, Jesper Juhl, Heikki Orsila, H. Peter Anvin, Philipp Hahn, and Stefan Richter. diff --git a/Documentation/watchdog/src/Makefile b/Documentation/watchdog/src/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..40e5f46e4740a865b173ab12a9c393ee071b9abe --- /dev/null +++ b/Documentation/watchdog/src/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := watchdog-simple watchdog-test + +# Tell kbuild to always build the programs +always := $(hostprogs-y) diff --git a/Kbuild b/Kbuild index e750e9c3fe59862e377a568e0758ca838e11c6f1..f056b4feee519748ae6ef22fde3df1da532e177b 100644 --- a/Kbuild +++ b/Kbuild @@ -43,7 +43,7 @@ $(obj)/$(bounds-file): kernel/bounds.s Kbuild # 2) Generate asm-offsets.h # -offsets-file := include/asm-$(SRCARCH)/asm-offsets.h +offsets-file := include/asm/asm-offsets.h always += $(offsets-file) targets += $(offsets-file) @@ -81,7 +81,6 @@ arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \ $(call if_changed_dep,cc_s_c) $(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s Kbuild - $(Q)mkdir -p $(dir $@) $(call cmd,offsets) ##### diff --git a/MAINTAINERS b/MAINTAINERS index 0652ab384d51297755487f8065a3c2b90a602aac..4c5e9fe0f7db5cd80b3fe2c4a76d38a3df1d7fcc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -441,10 +441,7 @@ M: spyro@f2s.com S: Maintained ARM PRIMECELL MMCI PL180/1 DRIVER -P: Russell King -M: rmk@arm.linux.org.uk -L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) -S: Maintained +S: Orphan ARM/ADI ROADRUNNER MACHINE SUPPORT P: Lennert Buytenhek @@ -483,11 +480,34 @@ M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/COMPULAB CM-X270/EM-X270 MACHINE SUPPORT +P: Mike Rapoport +M: mike@compulab.co.il +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +S: Maintained + ARM/CORGI MACHINE SUPPORT P: Richard Purdie M: rpurdie@rpsys.net S: Maintained +ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6) +P: Daniel Ribeiro +M: drwyrm@gmail.com +P: Stefan Schmidt +M: stefan@openezx.org +P: Harald Welte +M: laforge@openezx.org +L: openezx-devel@lists.openezx.org (subscribers-only) +W: http://www.openezx.org/ +S: Maintained + +ARM/FREESCALE IMX / MXC ARM ARCHITECTURE +P: Sascha Hauer +M: kernel@pengutronix.de +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +S: Maintained + ARM/GLOMATION GESBC9312SX MACHINE SUPPORT P: Lennert Buytenhek M: kernel@wantstofly.org @@ -574,11 +594,24 @@ M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/MAGICIAN MACHINE SUPPORT +P: Philipp Zabel +M: philipp.zabel@gmail.com +S: Maintained + ARM/TOSA MACHINE SUPPORT +P: Dmitry Baryshkov +M: dbaryshkov@gmail.com P: Dirk Opfer M: dirk@opfer-online.de S: Maintained +ARM/PALMTX SUPPORT +P: Marek Vasut +M: marek.vasut@gmail.com +W: http://hackndev.com +S: Maintained + ARM/PLEB SUPPORT P: Peter Chubb M: pleb@gelato.unsw.edu.au @@ -692,6 +725,15 @@ L: linux-wireless@vger.kernel.org L: ath5k-devel@lists.ath5k.org S: Maintained +ATHEROS ATH9K WIRELESS DRIVER +P: Luis R. Rodriguez +M: lrodriguez@atheros.com +P: Jouni Malinen +M: jmalinen@atheros.com +L: linux-wireless@vger.kernel.org +L: ath9k-devel@lists.ath9k.org +S: Supported + ATI_REMOTE2 DRIVER P: Ville Syrjala M: syrjala@sci.fi @@ -1021,6 +1063,12 @@ M: fujita.tomonori@lab.ntt.co.jp L: linux-scsi@vger.kernel.org S: Supported +BT8XXGPIO DRIVER +P: Michael Buesch +M: mb@bu3sch.de +W: http://bu3sch.de/btgpio.php +S: Maintained + BTTV VIDEO4LINUX DRIVER P: Mauro Carvalho Chehab M: mchehab@infradead.org @@ -1201,7 +1249,7 @@ S: Maintained CPU FREQUENCY DRIVERS P: Dave Jones M: davej@codemonkey.org.uk -L: cpufreq@lists.linux.org.uk +L: cpufreq@vger.kernel.org W: http://www.codemonkey.org.uk/projects/cpufreq/ T: git kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git S: Maintained @@ -1850,13 +1898,9 @@ W: http://gigaset307x.sourceforge.net/ S: Maintained HARDWARE MONITORING -P: Mark M. Hoffman -M: mhoffman@lightlink.com L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ -T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git testing -T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git release -S: Maintained +S: Orphaned HARDWARE RANDOM NUMBER GENERATOR CORE S: Orphaned @@ -1962,7 +2006,7 @@ P: Carlos Corbacho M: carlos@strangeworlds.co.uk S: Odd Fixes -HPET: High Precision Event Timers driver (hpet.c) +HPET: High Precision Event Timers driver (drivers/char/hpet.c) P: Clemens Ladisch M: clemens@ladisch.de S: Maintained @@ -2418,7 +2462,7 @@ L: kernel-janitors@vger.kernel.org W: http://www.kerneljanitors.org/ S: Maintained -KERNEL NFSD +KERNEL NFSD, SUNRPC, AND LOCKD SERVERS P: J. Bruce Fields M: bfields@fieldses.org P: Neil Brown @@ -2884,6 +2928,12 @@ M: jirislaby@gmail.com L: linux-kernel@vger.kernel.org S: Maintained +MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER +P: Felipe Balbi +M: felipe.balbi@nokia.com +L: linux-usb@vger.kernel.org +S: Maintained + MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) P: Andrew Gallatin M: gallatin@myri.com @@ -2915,8 +2965,6 @@ P: Faisal Latif M: flatif@neteffect.com P: Chien Tung M: ctung@neteffect.com -P: Glenn Streiff -M: gstreiff@neteffect.com L: general@lists.openfabrics.org W: http://www.neteffect.com S: Supported @@ -3034,9 +3082,10 @@ M: horms@verge.net.au P: Julian Anastasov M: ja@ssi.bg L: netdev@vger.kernel.org +L: lvs-devel@vger.kernel.org S: Maintained -NFS CLIENT +NFS, SUNRPC, AND LOCKD CLIENTS P: Trond Myklebust M: Trond.Myklebust@netapp.com L: linux-nfs@vger.kernel.org @@ -3097,6 +3146,12 @@ W: http://oss.oracle.com/projects/ocfs2/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git S: Supported +OMFS FILESYSTEM +P: Bob Copeland +M: me@bobcopeland.com +L: linux-karma-devel@lists.sourceforge.net +S: Maintained + OMNIKEY CARDMAN 4000 DRIVER P: Harald Welte M: laforge@gnumonks.org @@ -3764,6 +3819,12 @@ P: Ben Nizette M: bn@niasdigital.com S: Maintained +SOC-CAMERA V4L2 SUBSYSTEM +P: Guennadi Liakhovetski +M: g.liakhovetski@gmx.de +L: video4linux-list@redhat.com +S: Maintained + SOFTWARE RAID (Multiple Disks) SUPPORT P: Ingo Molnar M: mingo@redhat.com @@ -3930,7 +3991,7 @@ M: lethal@linux-sh.org L: linux-sh@vger.kernel.org W: http://www.linux-sh.org T: git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git -S: Maintained +S: Supported SUN3/3X P: Sam Creasey @@ -4058,12 +4119,6 @@ W: http://www.prosec.rub.de/tpm/ L: tpmdd-devel@lists.sourceforge.net S: Maintained -TRIDENT 4DWAVE/SIS 7018 PCI AUDIO CORE -P: Muli Ben-Yehuda -M: mulix@mulix.org -L: linux-kernel@vger.kernel.org -S: Maintained - TRIVIAL PATCHES P: Jesper Juhl M: trivial@kernel.org @@ -4109,9 +4164,6 @@ W: http://www.uclinux.org/ L: uclinux-dev@uclinux.org (subscribers-only) S: Maintained -UCLINUX FOR NEC V850 -P: Miles Bader - UCLINUX FOR RENESAS H8/300 P: Yoshinori Sato M: ysato@users.sourceforge.jp @@ -4150,12 +4202,6 @@ M: oliver@neukum.name L: linux-usb@vger.kernel.org S: Maintained -USB AUERSWALD DRIVER -P: Wolfgang Muees -M: wolfgang@iksw-muees.de -L: linux-usb@vger.kernel.org -S: Maintained - USB BLOCK DRIVER (UB ub) P: Pete Zaitcev M: zaitcev@redhat.com @@ -4475,6 +4521,15 @@ M: kaber@trash.net L: netdev@vger.kernel.org S: Maintained +VOLTAGE AND CURRENT REGULATOR FRAMEWORK +P: Liam Girdwood +M: lg@opensource.wolfsonmicro.com +P: Mark Brown +M: broonie@opensource.wolfsonmicro.com +W: http://opensource.wolfsonmicro.com/node/15 +T: git kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git +S: Supported + VT1211 HARDWARE MONITOR DRIVER P: Juerg Haefliger M: juergh@gmail.com @@ -4629,12 +4684,6 @@ L: linux-wireless@vger.kernel.org L: zd1211-devs@lists.sourceforge.net (subscribers-only) S: Maintained -ZF MACHZ WATCHDOG -P: Fernando Fuganti -M: fuganti@netbank.com.br -W: http://cvs.conectiva.com.br/drivers/ZFL-watchdog/ -S: Maintained - ZR36067 VIDEO FOR LINUX DRIVER P: Ronald Bultje M: rbultje@ronald.bitfreak.net diff --git a/Makefile b/Makefile index 4bcd1cf90cb103e8578b4692ea7e75470f8cbe77..53bf6ec1af9d29fac6682fb6cd4c2e5dbcb84490 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 -SUBLEVEL = 26 -EXTRAVERSION = +SUBLEVEL = 27 +EXTRAVERSION = -rc3 NAME = Rotary Wombat # *DOCUMENTATION* @@ -205,6 +205,13 @@ ifeq ($(ARCH),x86_64) SRCARCH := x86 endif +# Where to locate arch specific headers +ifeq ($(ARCH),sparc64) + hdr-arch := sparc +else + hdr-arch := $(SRCARCH) +endif + KCONFIG_CONFIG ?= .config # SHELL used by kbuild @@ -326,7 +333,8 @@ AFLAGS_KERNEL = # Needed to be compatible with the O= option LINUXINCLUDE := -Iinclude \ $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \ - -include include/linux/autoconf.h + -I$(srctree)/arch/$(hdr-arch)/include \ + -include include/linux/autoconf.h KBUILD_CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE) @@ -813,6 +821,9 @@ ifdef CONFIG_HEADERS_CHECK endif ifdef CONFIG_SAMPLES $(Q)$(MAKE) $(build)=samples +endif +ifdef CONFIG_BUILD_DOCSRC + $(Q)$(MAKE) $(build)=Documentation endif $(call vmlinux-modpost) $(call if_changed_rule,vmlinux__) @@ -921,8 +932,10 @@ ifneq ($(KBUILD_SRC),) echo " in the '$(srctree)' directory.";\ /bin/false; \ fi; - $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi; - $(Q)ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm + $(Q)if [ ! -d include2 ]; then \ + mkdir -p include2; \ + ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \ + fi endif # prepare2 creates a makefile if using a separate output directory @@ -948,22 +961,34 @@ export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH) # The asm symlink changes when $(ARCH) changes. # Detect this and ask user to run make mrproper - -include/asm: FORCE - $(Q)set -e; asmlink=`readlink include/asm | cut -d '-' -f 2`; \ - if [ -L include/asm ]; then \ - if [ "$$asmlink" != "$(SRCARCH)" ]; then \ +define check-symlink + set -e; \ + if [ -L include/asm ]; then \ + asmlink=`readlink include/asm | cut -d '-' -f 2`; \ + if [ "$$asmlink" != "$(SRCARCH)" ]; then \ echo "ERROR: the symlink $@ points to asm-$$asmlink but asm-$(SRCARCH) was expected"; \ echo " set ARCH or save .config and run 'make mrproper' to fix it"; \ - exit 1; \ - fi; \ - else \ - echo ' SYMLINK $@ -> include/asm-$(SRCARCH)'; \ - if [ ! -d include ]; then \ - mkdir -p include; \ - fi; \ - ln -fsn asm-$(SRCARCH) $@; \ + exit 1; \ + fi; \ fi +endef + +# We create the target directory of the symlink if it does +# not exist so the test in chack-symlink works and we have a +# directory for generated filesas used by some architectures. +define create-symlink + if [ ! -L include/asm ]; then \ + echo ' SYMLINK $@ -> include/asm-$(SRCARCH)'; \ + if [ ! -d include/asm-$(SRCARCH) ]; then \ + mkdir -p include/asm-$(SRCARCH); \ + fi; \ + ln -fsn asm-$(SRCARCH) $@; \ + fi +endef + +include/asm: FORCE + $(Q)$(check-symlink) + $(Q)$(create-symlink) # Generate some files # --------------------------------------------------------------------------- @@ -1010,36 +1035,43 @@ firmware_install: FORCE # --------------------------------------------------------------------------- # Kernel headers -INSTALL_HDR_PATH=$(objtree)/usr -export INSTALL_HDR_PATH -HDRFILTER=generic i386 x86_64 -HDRARCHES=$(filter-out $(HDRFILTER),$(patsubst $(srctree)/include/asm-%/Kbuild,%,$(wildcard $(srctree)/include/asm-*/Kbuild))) +#Default location for installed headers +export INSTALL_HDR_PATH = $(objtree)/usr -PHONY += headers_install_all -headers_install_all: include/linux/version.h scripts_basic FORCE +hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj +# Find out where the Kbuild file is located to support +# arch/$(ARCH)/include/asm +hdr-dir = $(strip \ + $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild), \ + arch/$(hdr-arch)/include/asm, include/asm-$(hdr-arch))) + +# If we do an all arch process set dst to asm-$(hdr-arch) +hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm) + +PHONY += __headers +__headers: include/linux/version.h scripts_basic FORCE $(Q)$(MAKE) $(build)=scripts scripts/unifdef - $(Q)for arch in $(HDRARCHES); do \ - $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch ;\ - done + +PHONY += headers_install_all +headers_install_all: + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install PHONY += headers_install -headers_install: include/linux/version.h scripts_basic FORCE - @if [ ! -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \ - echo '*** Error: Headers not exportable for this architecture ($(SRCARCH))'; \ - exit 1 ; fi - $(Q)$(MAKE) $(build)=scripts scripts/unifdef - $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include +headers_install: __headers + $(if $(wildcard $(srctree)/$(hdr-dir)/Kbuild),, \ + $(error Headers not exportable for the $(SRCARCH) architecture)) + $(Q)$(MAKE) $(hdr-inst)=include + $(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) PHONY += headers_check_all headers_check_all: headers_install_all - $(Q)for arch in $(HDRARCHES); do \ - $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch HDRCHECK=1 ;\ - done + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check PHONY += headers_check headers_check: headers_install - $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) HDRCHECK=1 # --------------------------------------------------------------------------- # Modules @@ -1061,6 +1093,7 @@ modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order @echo ' Building modules, stage 2.'; $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild # Target to prepare building external modules @@ -1130,13 +1163,13 @@ MRPROPER_FILES += .config .config.old include/asm .version .old_version \ include/linux/autoconf.h include/linux/version.h \ include/linux/utsrelease.h \ include/linux/bounds.h include/asm*/asm-offsets.h \ - Module.symvers tags TAGS cscope* + Module.symvers Module.markers tags TAGS cscope* # clean - Delete most, but leave enough to build external modules # clean: rm-dirs := $(CLEAN_DIRS) clean: rm-files := $(CLEAN_FILES) -clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs)) +clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs) Documentation) PHONY += $(clean-dirs) clean archclean $(clean-dirs): @@ -1149,7 +1182,7 @@ clean: archclean $(clean-dirs) \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' -o -name 'modules.order' \ - -o -name 'Module.markers' \) \ + -o -name 'Module.markers' -o -name '.tmp_*.o.*' \) \ -type f -print | xargs rm -f # mrproper - Delete all generated files, including .config @@ -1223,21 +1256,17 @@ help: @echo ' cscope - Generate cscope index' @echo ' kernelrelease - Output the release version string' @echo ' kernelversion - Output the version stored in Makefile' - @if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \ - echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \ + @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \ echo ' (default: $(INSTALL_HDR_PATH))'; \ - fi - @echo '' + echo '' @echo 'Static analysers' @echo ' checkstack - Generate a list of stack hogs' @echo ' namespacecheck - Name space analysis on compiled kernel' @echo ' versioncheck - Sanity check on version.h usage' @echo ' includecheck - Check for duplicate included header files' @echo ' export_report - List the usages of all exported symbols' - @if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \ - echo ' headers_check - Sanity check on exported headers'; \ - fi - @echo '' + @echo ' headers_check - Sanity check on exported headers'; \ + echo '' @echo 'Kernel packaging:' @$(MAKE) $(build)=$(package-dir) help @echo '' @@ -1410,7 +1439,11 @@ define find-sources \( -name config -o -name 'asm-*' \) -prune \ -o -name $1 -print; \ for arch in $(ALLINCLUDE_ARCHS) ; do \ - find $(__srctree)include/asm-$${arch} $(RCS_FIND_IGNORE) \ + test -e $(__srctree)include/asm-$${arch} && \ + find $(__srctree)include/asm-$${arch} $(RCS_FIND_IGNORE) \ + -name $1 -print; \ + test -e $(__srctree)arch/$${arch}/include/asm && \ + find $(__srctree)arch/$${arch}/include/asm $(RCS_FIND_IGNORE) \ -name $1 -print; \ done ; \ find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \ @@ -1462,7 +1495,7 @@ quiet_cmd_cscope-file = FILELST cscope.files cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files quiet_cmd_cscope = MAKE cscope.out - cmd_cscope = cscope -b + cmd_cscope = cscope -b -f cscope.out cscope: FORCE $(call cmd,cscope-file) diff --git a/arch/Kconfig b/arch/Kconfig index ad89a33d8c6ef66acb166e49fa423659e18afc9c..364c6dadde0a6b6ed988f15294f799240b292a68 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -27,18 +27,65 @@ config KPROBES for kernel debugging, non-intrusive instrumentation and testing. If in doubt, say "N". +config HAVE_EFFICIENT_UNALIGNED_ACCESS + def_bool n + help + Some architectures are unable to perform unaligned accesses + without the use of get_unaligned/put_unaligned. Others are + unable to perform such accesses efficiently (e.g. trap on + unaligned access and require fixing it up in the exception + handler.) + + This symbol should be selected by an architecture if it can + perform unaligned accesses efficiently to allow different + code paths to be selected for these cases. Some network + drivers, for example, could opt to not fix up alignment + problems with received packets if doing so would not help + much. + + See Documentation/unaligned-memory-access.txt for more + information on the topic of unaligned memory accesses. + config KRETPROBES def_bool y depends on KPROBES && HAVE_KRETPROBES +config HAVE_IOREMAP_PROT + def_bool n + config HAVE_KPROBES def_bool n config HAVE_KRETPROBES def_bool n +# +# An arch should select this if it provides all these things: +# +# task_pt_regs() in asm/processor.h or asm/ptrace.h +# arch_has_single_step() if there is hardware single-step support +# arch_has_block_step() if there is hardware block-step support +# arch_ptrace() and not #define __ARCH_SYS_PTRACE +# compat_arch_ptrace() and #define __ARCH_WANT_COMPAT_SYS_PTRACE +# asm/syscall.h supplying asm-generic/syscall.h interface +# linux/regset.h user_regset interfaces +# CORE_DUMP_USE_REGSET #define'd in linux/elf.h +# TIF_SYSCALL_TRACE calls tracehook_report_syscall_{entry,exit} +# TIF_NOTIFY_RESUME calls tracehook_notify_resume() +# signal delivery calls tracehook_signal_handler() +# +config HAVE_ARCH_TRACEHOOK + def_bool n + config HAVE_DMA_ATTRS def_bool n config USE_GENERIC_SMP_HELPERS def_bool n + +config HAVE_CLK + def_bool n + help + The calls support software clock gating and + thus are a key power management tool on many systems. + diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index dbe8c280fea9bba26736a5ad7341dfcc9bcaa62d..1bec55d63ef6241fb9451c821a09960657503acb 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -333,11 +333,6 @@ config PCI_SYSCALL config IOMMU_HELPER def_bool PCI -config ALPHA_CORE_AGP - bool - depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL - default y - config ALPHA_NONAME bool depends on ALPHA_BOOK1 || ALPHA_NONAME_CH diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c index c00646b25f6e961862900c8e13bd69cb31a89823..3047a1b3a517160f4c016c032f30549e3c20ca19 100644 --- a/arch/alpha/boot/misc.c +++ b/arch/alpha/boot/misc.c @@ -78,8 +78,6 @@ static unsigned outcnt; /* bytes in output buffer */ static int fill_inbuf(void); static void flush_window(void); static void error(char *m); -static void gzip_mark(void **); -static void gzip_release(void **); static char *input_data; static int input_data_size; @@ -88,51 +86,18 @@ static uch *output_data; static ulg output_ptr; static ulg bytes_out; -static void *malloc(int size); -static void free(void *where); static void error(char *m); static void gzip_mark(void **); static void gzip_release(void **); extern int end; static ulg free_mem_ptr; -static ulg free_mem_ptr_end; +static ulg free_mem_end_ptr; #define HEAP_SIZE 0x3000 #include "../../../lib/inflate.c" -static void *malloc(int size) -{ - void *p; - - if (size <0) error("Malloc error"); - if (free_mem_ptr <= 0) error("Memory error"); - - free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - - if (free_mem_ptr >= free_mem_ptr_end) - error("Out of memory"); - return p; -} - -static void free(void *where) -{ /* gzip_mark & gzip_release do the free */ -} - -static void gzip_mark(void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release(void **ptr) -{ - free_mem_ptr = (long) *ptr; -} - /* =========================================================================== * Fill the input buffer. This is called only when the buffer is empty * and at least one byte is really needed. @@ -193,7 +158,7 @@ decompress_kernel(void *output_start, /* FIXME FIXME FIXME */ free_mem_ptr = (ulg)output_start + ksize; - free_mem_ptr_end = (ulg)output_start + ksize + 0x200000; + free_mem_end_ptr = (ulg)output_start + ksize + 0x200000; /* FIXME FIXME FIXME */ /* put in temp area to reduce initial footprint */ diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 32ca1b9273078d7025466075e677a59e34938b33..6e943135f0e041346e63348a18fb33239113b9c1 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -253,15 +253,15 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer, } asmlinkage int -osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bufsiz) +osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz) { - struct nameidata nd; + struct path path; int retval; - retval = user_path_walk(path, &nd); + retval = user_path(pathname, &path); if (!retval) { - retval = do_osf_statfs(nd.path.dentry, buffer, bufsiz); - path_put(&nd.path); + retval = do_osf_statfs(path.dentry, buffer, bufsiz); + path_put(&path); } return retval; } diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c index 40c15e7301ded438baa46d83e67fcac06062efd6..234e42b8ee7436cb61455c3eabe8f3d8f61ea183 100644 --- a/arch/alpha/mm/init.c +++ b/arch/alpha/mm/init.c @@ -94,36 +94,6 @@ __bad_page(void) return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED)); } -#ifndef CONFIG_DISCONTIGMEM -void -show_mem(void) -{ - long i,free = 0,total = 0,reserved = 0; - long shared = 0, cached = 0; - - printk("\nMem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (!page_count(mem_map+i)) - free++; - else - shared += page_count(mem_map + i) - 1; - } - printk("%ld pages of RAM\n",total); - printk("%ld free pages\n",free); - printk("%ld reserved pages\n",reserved); - printk("%ld pages shared\n",shared); - printk("%ld pages swap cached\n",cached); -} -#endif - static inline unsigned long load_PCB(struct pcb_struct *pcb) { diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index 10ab7833e83ca660c7292869e501434251e4bdba..a13de49d126579c58f2b4d3131dd861741628d59 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -19,7 +19,6 @@ #include pg_data_t node_data[MAX_NUMNODES]; -bootmem_data_t node_bdata[MAX_NUMNODES]; EXPORT_SYMBOL(node_data); #undef DEBUG_DISCONTIG @@ -141,7 +140,7 @@ setup_memory_node(int nid, void *kernel_end) printk(" not enough mem to reserve NODE_DATA"); return; } - NODE_DATA(nid)->bdata = &node_bdata[nid]; + NODE_DATA(nid)->bdata = &bootmem_node_data[nid]; printk(" Detected node memory: start %8lu, end %8lu\n", node_min_pfn, node_max_pfn); @@ -304,8 +303,9 @@ void __init paging_init(void) dma_local_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; for_each_online_node(nid) { - unsigned long start_pfn = node_bdata[nid].node_boot_start >> PAGE_SHIFT; - unsigned long end_pfn = node_bdata[nid].node_low_pfn; + bootmem_data_t *bdata = &bootmem_node_data[nid]; + unsigned long start_pfn = bdata->node_min_pfn; + unsigned long end_pfn = bdata->node_low_pfn; if (dma_local_pfn >= end_pfn - start_pfn) zones_size[ZONE_DMA] = end_pfn - start_pfn; @@ -313,7 +313,7 @@ void __init paging_init(void) zones_size[ZONE_DMA] = dma_local_pfn; zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn; } - free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn, NULL); + free_area_init_node(nid, zones_size, start_pfn, NULL); } /* Initialize the kernel's ZERO_PGE. */ @@ -359,38 +359,3 @@ void __init mem_init(void) mem_stress(); #endif } - -void -show_mem(void) -{ - long i,free = 0,total = 0,reserved = 0; - long shared = 0, cached = 0; - int nid; - - printk("\nMem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_online_node(nid) { - unsigned long flags; - pgdat_resize_lock(NODE_DATA(nid), &flags); - i = node_spanned_pages(nid); - while (i-- > 0) { - struct page *page = nid_page_nr(nid, i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - } - pgdat_resize_unlock(NODE_DATA(nid), &flags); - } - printk("%ld pages of RAM\n",total); - printk("%ld free pages\n",free); - printk("%ld reserved pages\n",reserved); - printk("%ld pages shared\n",shared); - printk("%ld pages swap cached\n",cached); -} diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c7ad324ddf2cf407c89839f75487f8e27f9fa0cc..4b8acd2851f48e4a7e42bd6f8886fae30aae930c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -12,10 +12,12 @@ config ARM select RTC_LIB select SYS_SUPPORTS_APM_EMULATION select HAVE_OPROFILE + select HAVE_ARCH_KGDB select HAVE_KPROBES if (!XIP_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FTRACE if (!XIP_KERNEL) select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE) + select HAVE_GENERIC_DMA_COHERENT help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -197,12 +199,14 @@ choice config ARCH_AAEC2000 bool "Agilent AAEC-2000 based" select ARM_AMBA + select HAVE_CLK help This enables support for systems based on the Agilent AAEC-2000 config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA + select HAVE_CLK select ICST525 help Support for ARM's Integrator platform. @@ -210,6 +214,7 @@ config ARCH_INTEGRATOR config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA + select HAVE_CLK select ICST307 select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -220,6 +225,7 @@ config ARCH_VERSATILE bool "ARM Ltd. Versatile family" select ARM_AMBA select ARM_VIC + select HAVE_CLK select ICST307 select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -229,6 +235,7 @@ config ARCH_VERSATILE config ARCH_AT91 bool "Atmel AT91" select GENERIC_GPIO + select HAVE_CLK help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -261,7 +268,8 @@ config ARCH_EP93XX select ARM_AMBA select ARM_VIC select GENERIC_GPIO - select HAVE_GPIO_LIB + select HAVE_CLK + select ARCH_REQUIRE_GPIOLIB help This enables support for the Cirrus EP93xx series of CPUs. @@ -307,7 +315,7 @@ config ARCH_IOP32X select PLAT_IOP select PCI select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for Intel's 80219 and IOP32X (XScale) family of processors. @@ -318,7 +326,7 @@ config ARCH_IOP33X select PLAT_IOP select PCI select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for Intel's IOP33X (XScale) family of processors. @@ -380,6 +388,7 @@ config ARCH_NS9XXX select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_CLK help Say Y here if you intend to run this kernel on a NetSilicon NS9xxx System. @@ -410,7 +419,7 @@ config ARCH_MXC select GENERIC_CLOCKEVENTS select ARCH_MTD_XIP select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for Freescale MXC/iMX-based family of processors @@ -429,6 +438,7 @@ config ARCH_ORION5X config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" + select HAVE_CLK help This enables support for Philips PNX4008 mobile platform. @@ -437,7 +447,8 @@ config ARCH_PXA depends on MMU select ARCH_MTD_XIP select GENERIC_GPIO - select HAVE_GPIO_LIB + select HAVE_CLK + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT @@ -467,14 +478,16 @@ config ARCH_SA1100 select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_CLK select TICK_ONESHOT - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for StrongARM 11x0 based boards. config ARCH_S3C2410 bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" select GENERIC_GPIO + select HAVE_CLK help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (), the IPAQ 1940 or @@ -502,13 +515,15 @@ config ARCH_DAVINCI select GENERIC_TIME select GENERIC_CLOCKEVENTS select GENERIC_GPIO + select HAVE_CLK help Support for TI's DaVinci platform. config ARCH_OMAP bool "TI OMAP" select GENERIC_GPIO - select HAVE_GPIO_LIB + select HAVE_CLK + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS help @@ -1210,6 +1225,8 @@ source "drivers/dma/Kconfig" source "drivers/dca/Kconfig" +source "drivers/regulator/Kconfig" + source "drivers/uio/Kconfig" endmenu diff --git a/arch/arm/Makefile b/arch/arm/Makefile index b20995a82e046b380210d56956fd8a851ca7356b..703a44fa0f9b7c70814c17ab21e613eafcf4655a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -67,7 +67,7 @@ tune-$(CONFIG_CPU_ARM720T) :=-mtune=arm7tdmi tune-$(CONFIG_CPU_ARM740T) :=-mtune=arm7tdmi tune-$(CONFIG_CPU_ARM9TDMI) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM940T) :=-mtune=arm9tdmi -tune-$(CONFIG_CPU_ARM946T) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) +tune-$(CONFIG_CPU_ARM946E) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi @@ -97,9 +97,7 @@ textofs-y := 0x00008000 machine-$(CONFIG_ARCH_RPC) := rpc machine-$(CONFIG_ARCH_EBSA110) := ebsa110 machine-$(CONFIG_ARCH_CLPS7500) := clps7500 - incdir-$(CONFIG_ARCH_CLPS7500) := cl7500 machine-$(CONFIG_FOOTBRIDGE) := footbridge - incdir-$(CONFIG_FOOTBRIDGE) := ebsa285 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SA1100) := sa1100 ifeq ($(CONFIG_ARCH_SA1100),y) @@ -114,13 +112,15 @@ endif machine-$(CONFIG_ARCH_IOP32X) := iop32x machine-$(CONFIG_ARCH_IOP33X) := iop33x machine-$(CONFIG_ARCH_IOP13XX) := iop13xx + plat-$(CONFIG_PLAT_IOP) := iop machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2) := omap2 - incdir-$(CONFIG_ARCH_OMAP) := omap - machine-$(CONFIG_ARCH_S3C2410) := s3c2410 + plat-$(CONFIG_ARCH_OMAP) := omap + machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 + plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_IMX) := imx @@ -135,10 +135,11 @@ endif machine-$(CONFIG_ARCH_DAVINCI) := davinci machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood machine-$(CONFIG_ARCH_KS8695) := ks8695 - incdir-$(CONFIG_ARCH_MXC) := mxc + plat-$(CONFIG_ARCH_MXC) := mxc machine-$(CONFIG_ARCH_MX2) := mx2 machine-$(CONFIG_ARCH_MX3) := mx3 machine-$(CONFIG_ARCH_ORION5X) := orion5x + plat-$(CONFIG_PLAT_ORION) := orion machine-$(CONFIG_ARCH_MSM7X00A) := msm machine-$(CONFIG_ARCH_LOKI) := loki machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 @@ -153,17 +154,22 @@ endif # The byte offset of the kernel image in RAM from the start of RAM. TEXT_OFFSET := $(textofs-y) -ifeq ($(incdir-y),) -incdir-y := $(machine-y) -endif -INCDIR := arch-$(incdir-y) - +# The first directory contains additional information for the boot setup code ifneq ($(machine-y),) -MACHINE := arch/arm/mach-$(machine-y)/ +MACHINE := arch/arm/mach-$(word 1,$(machine-y))/ else MACHINE := endif +machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) +platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y)) + +ifeq ($(KBUILD_SRC),) +KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs)) +else +KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs)) +endif + export TEXT_OFFSET GZFLAGS MMUEXT # Do we have FASTFPE? @@ -174,23 +180,11 @@ endif # If we have a machine-specific directory, then include it in the build. core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ -core-y += $(MACHINE) -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2400/ -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2412/ -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2440/ -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2442/ -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2443/ +core-y += $(machdirs) $(platdirs) core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ -# If we have a common platform directory, then include it in the build. -core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/ -core-$(CONFIG_PLAT_ORION) += arch/arm/plat-orion/ -core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/ -core-$(CONFIG_PLAT_S3C24XX) += arch/arm/plat-s3c24xx/ -core-$(CONFIG_ARCH_MXC) += arch/arm/plat-mxc/ - drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ libs-y := arch/arm/lib/ $(libs-y) @@ -210,20 +204,10 @@ boot := arch/arm/boot # them changed. We use .arch to indicate when they were updated # last, otherwise make uses the target directory mtime. -include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/auto.conf - @echo ' SYMLINK include/asm-arm/arch -> include/asm-arm/$(INCDIR)' -ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p include/asm-arm - $(Q)ln -fsn $(srctree)/include/asm-arm/$(INCDIR) include/asm-arm/arch -else - $(Q)ln -fsn $(INCDIR) include/asm-arm/arch -endif - @touch $@ - archprepare: maketools PHONY += maketools FORCE -maketools: include/linux/version.h include/asm-arm/.arch FORCE +maketools: include/linux/version.h FORCE $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h # Convert bzImage to zImage diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 95baac4939e09a3809e427ed82207c5f3c1270c7..94462a097f86697ce51558bd9389a4886b904318 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -112,6 +112,3 @@ $(obj)/font.c: $(FONTC) $(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config @sed "$(SEDFLAGS)" < $< > $@ - -$(obj)/misc.o: $(obj)/misc.c include/asm/arch/uncompress.h lib/inflate.c - diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index dd3fbd6766e14a6168aa8515c6c4a6e123d47166..aa5ee49c5c5ae7c1e37b6ab281a2f09388902f57 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -6,7 +6,6 @@ */ #include -#include .section ".start", "ax" diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index de41daeab5e9832416218a0ca3e07b9a15cb219f..d42f89b7760bf2c537d3f4769bbc53715af7b6b5 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -37,7 +37,7 @@ #else -#include +#include .macro writeb, ch, rb senduart \ch, \rb diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 9b444022cb9bc76933f1fdba6dffb294723fd7ac..65ce8fff29db1583890fe54f438f6f03385e11a9 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -27,7 +27,7 @@ unsigned int __machine_arch_type; static void putstr(const char *ptr); #include -#include +#include #ifdef CONFIG_DEBUG_ICEDCC @@ -217,8 +217,6 @@ static unsigned outcnt; /* bytes in output buffer */ static int fill_inbuf(void); static void flush_window(void); static void error(char *m); -static void gzip_mark(void **); -static void gzip_release(void **); extern char input_data[]; extern char input_data_end[]; @@ -227,64 +225,21 @@ static uch *output_data; static ulg output_ptr; static ulg bytes_out; -static void *malloc(int size); -static void free(void *where); static void error(char *m); -static void gzip_mark(void **); -static void gzip_release(void **); static void putstr(const char *); extern int end; static ulg free_mem_ptr; -static ulg free_mem_ptr_end; +static ulg free_mem_end_ptr; -#define HEAP_SIZE 0x3000 - -#include "../../../../lib/inflate.c" - -#ifndef STANDALONE_DEBUG -static void *malloc(int size) -{ - void *p; - - if (size <0) error("Malloc error"); - if (free_mem_ptr <= 0) error("Memory error"); - - free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - - if (free_mem_ptr >= free_mem_ptr_end) - error("Out of memory"); - return p; -} - -static void free(void *where) -{ /* gzip_mark & gzip_release do the free */ -} - -static void gzip_mark(void **ptr) -{ - arch_decomp_wdog(); - *ptr = (void *) free_mem_ptr; -} +#ifdef STANDALONE_DEBUG +#define NO_INFLATE_MALLOC +#endif -static void gzip_release(void **ptr) -{ - arch_decomp_wdog(); - free_mem_ptr = (long) *ptr; -} -#else -static void gzip_mark(void **ptr) -{ -} +#define ARCH_HAS_DECOMP_WDOG -static void gzip_release(void **ptr) -{ -} -#endif +#include "../../../../lib/inflate.c" /* =========================================================================== * Fill the input buffer. This is called only when the buffer is empty @@ -348,7 +303,7 @@ decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p, { output_data = (uch *)output_start; /* Points to kernel start */ free_mem_ptr = free_mem_ptr_p; - free_mem_ptr_end = free_mem_ptr_end_p; + free_mem_end_ptr = free_mem_ptr_end_p; __machine_arch_type = arch_id; arch_decomp_setup(); diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index dd2947342604b2ea43bdfa409dcc32b4b2609cf2..69130f365904bc0889e3f99d75af10834c9a9f8d 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -280,7 +280,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, /* * Trying to unmap an invalid mapping */ - if (dma_mapping_error(dma_addr)) { + if (dma_mapping_error(dev, dma_addr)) { dev_err(dev, "Trying to unmap invalid mapping\n"); return; } diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index c3c3a333904995273e5f7af7c68890c8baee361d..283051eaf931c7b1f02b58690ec7239d25eed9d7 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include #include #include @@ -331,17 +331,17 @@ static int locomo_gpio_type(unsigned int irq, unsigned int type) mask = 1 << (irq - LOCOMO_IRQ_GPIO_START); - if (type == IRQT_PROBE) { + if (type == IRQ_TYPE_PROBE) { if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) return 0; - type = __IRQT_RISEDGE | __IRQT_FALEDGE; + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } - if (type & __IRQT_RISEDGE) + if (type & IRQ_TYPE_EDGE_RISING) GPIO_IRQ_rising_edge |= mask; else GPIO_IRQ_rising_edge &= ~mask; - if (type & __IRQT_FALEDGE) + if (type & IRQ_TYPE_EDGE_FALLING) GPIO_IRQ_falling_edge |= mask; else GPIO_IRQ_falling_edge &= ~mask; @@ -473,7 +473,7 @@ static void locomo_setup_irq(struct locomo *lchip) /* * Install handler for IRQ_LOCOMO_HW. */ - set_irq_type(lchip->irq, IRQT_FALLING); + set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING); set_irq_chip_data(lchip->irq, irqbase); set_irq_chained_handler(lchip->irq, locomo_handler); diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index c8e8f0ea59e1b2ce146da5effe3f6ebada19df6d..ec8a5471bf06df84b2c54441619724631fc54b4c 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include #include #include @@ -241,14 +241,14 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags) void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip0; - if (flags == IRQT_PROBE) + if (flags == IRQ_TYPE_PROBE) return 0; - if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) + if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) return -EINVAL; ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); - if (flags & __IRQT_RISEDGE) + if (flags & IRQ_TYPE_EDGE_RISING) ip0 &= ~mask; else ip0 |= mask; @@ -338,14 +338,14 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags) void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip1; - if (flags == IRQT_PROBE) + if (flags == IRQ_TYPE_PROBE) return 0; - if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) + if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) return -EINVAL; ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); - if (flags & __IRQT_RISEDGE) + if (flags & IRQ_TYPE_EDGE_RISING) ip1 &= ~mask; else ip1 |= mask; @@ -427,7 +427,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip) /* * Register SA1111 interrupt */ - set_irq_type(sachip->irq, IRQT_RISING); + set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); set_irq_data(sachip->irq, irqbase); set_irq_chained_handler(sachip->irq, sa1111_irq_handler); } @@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) if (!sachip) return -ENOMEM; - sachip->clk = clk_get(me, "GPIO27_CLK"); + sachip->clk = clk_get(me, "SA1111_CLK"); if (!sachip->clk) { ret = PTR_ERR(sachip->clk); goto err_free; diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 8822b684d474ad322b71bbcf3fe457316fdba775..db83091614082efb5aac4a6dc6630d5d2e99353f 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -26,13 +26,12 @@ #include #include -#include -#include +#include #include -#include -#include -#include -#include +#include +#include +#include +#include #include /* diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c index d544da4147310954c6013e37863e786ece6ff312..df0983aafe694b6e58cab75da60e2eeff5ddb673 100644 --- a/arch/arm/common/time-acorn.c +++ b/arch/arm/common/time-acorn.c @@ -18,7 +18,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c index 117cab30bd36ca4e232fab5243b43ee81bc4b22c..7ecd3c0ab011a2c1196c9c61bdd0c34296c4b659 100644 --- a/arch/arm/common/uengine.c +++ b/arch/arm/common/uengine.c @@ -16,8 +16,7 @@ #include #include #include -#include -#include +#include #include #include diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig index be2b2f38fd94912642b59b706ee4edadcfd40bf1..bf97801a10682d9058b8f09b1485b27a80524880 100644 --- a/arch/arm/configs/at91cap9adk_defconfig +++ b/arch/arm/configs/at91cap9adk_defconfig @@ -170,7 +170,7 @@ CONFIG_MACH_AT91CAP9ADK=y # AT91 Board Options # CONFIG_MTD_AT91_DATAFLASH_CARD=y -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -442,7 +442,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 2011adfa6758998115dec29a07593b052f66515a..38e6a0abeb4eaceba5008eb71c96a2107e2f1b6b 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -176,7 +176,7 @@ CONFIG_MACH_AT91SAM9260EK=y # AT91 Board Options # # CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 4049768962d2dc4379b3a0295cc2e6acd15c3ad1..93b779f94b41ef8ce7731c169951768e9b4a9528 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9261EK=y # AT91 Board Options # # CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -433,7 +433,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index fa1c5aecb5a8d86c2ebdf9d204c55adcfc45154d..a7ddd94363cac32839653882b17926d8ff568881 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9263EK=y # AT91 Board Options # CONFIG_MTD_AT91_DATAFLASH_CARD=y -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -428,7 +428,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig index c06863847364de15645a1b5c64dfd9524a37e36b..df0d6ee672b388d86b15f54fb7501fefabc50475 100644 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ b/arch/arm/configs/at91sam9g20ek_defconfig @@ -168,7 +168,7 @@ CONFIG_MACH_AT91SAM9G20EK=y # AT91 Board Options # # CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -442,10 +442,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index d8ec5f9ca6ec49c5ec40aebd6b4672124020e27d..1c76642272a1bde973eabeb7a4f0164bded8b36a 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -392,7 +392,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ONENAND is not set diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig index f3cd4a95373ab3bcf76e983c2f6926441eb92796..f945105d6cd6000b9f64a1196aa367371ccb6f07 100644 --- a/arch/arm/configs/cam60_defconfig +++ b/arch/arm/configs/cam60_defconfig @@ -466,10 +466,10 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -# CONFIG_MTD_NAND_AT91_ECC_SOFT is not set -CONFIG_MTD_NAND_AT91_ECC_HW=y -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set +CONFIG_MTD_NAND_ATMEL_ECC_HW=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index 493ecee24f94c5c4c7e268c00fe8c48bb2481341..2307587a38a9ec89ca60251429c62cced8281053 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -1,15 +1,19 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-hh17 -# Fri Nov 9 20:23:03 2007 +# Linux kernel version: 2.6.26 +# Sat Jul 26 22:28:46 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y @@ -18,75 +22,90 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -100,6 +119,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System Type @@ -111,21 +131,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_RPC is not set @@ -133,80 +158,48 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_BOARD_IRQ_MAP_SMALL is not set -CONFIG_BOARD_IRQ_MAP_BIG=y -CONFIG_DMABOUNCE=y +# CONFIG_ARCH_MSM7X00A is not set # -# Intel PXA2xx Implementations +# Intel PXA2xx/PXA3xx Implementations # +# CONFIG_ARCH_GUMSTIX is not set # CONFIG_ARCH_LUBBOCK is not set # CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set # CONFIG_ARCH_PXA_IDP is not set -CONFIG_TOSHIBA_TMIO_OHCI=y -CONFIG_ARCH_ESERIES=y +# CONFIG_PXA_SHARPSL is not set +CONFIG_ARCH_PXA_ESERIES=y CONFIG_MACH_E330=y +CONFIG_MACH_E350=y CONFIG_MACH_E740=y CONFIG_MACH_E750=y CONFIG_MACH_E400=y CONFIG_MACH_E800=y -CONFIG_E330_LCD=y -CONFIG_E740_LCD=y -CONFIG_E750_LCD=y -CONFIG_E400_LCD=y -CONFIG_E800_LCD=y -CONFIG_ESERIES_UDC=y -CONFIG_E330_TC6387XB=y -CONFIG_E740_T7L66XB=y -CONFIG_E400_T7L66XB=y -CONFIG_E750_E800_TC6393XB=y -CONFIG_E740_PCMCIA=m -CONFIG_E750_PCMCIA=m -CONFIG_E800_PCMCIA=m -# CONFIG_MACH_A620 is not set -# CONFIG_MACH_A716 is not set -# CONFIG_MACH_A730 is not set -# CONFIG_ARCH_H1900 is not set -# CONFIG_ARCH_H2200 is not set -# CONFIG_MACH_H3900 is not set -# CONFIG_MACH_H4000 is not set -# CONFIG_MACH_H4700 is not set -# CONFIG_MACH_HX2750 is not set -# CONFIG_ARCH_H5400 is not set -# CONFIG_MACH_HIMALAYA is not set -# CONFIG_MACH_HTCUNIVERSAL is not set -# CONFIG_MACH_HTCALPINE is not set -# CONFIG_MACH_MAGICIAN is not set -# CONFIG_MACH_HTCAPACHE is not set -# CONFIG_MACH_BLUEANGEL is not set - -# -# HTC_HW6X00 -# -# CONFIG_MACH_HTCBEETLES is not set -# CONFIG_MACH_HW6900 is not set -# CONFIG_MACH_HTCATHENA is not set -# CONFIG_ARCH_AXIMX3 is not set -# CONFIG_ARCH_AXIMX5 is not set -# CONFIG_MACH_X50 is not set -# CONFIG_ARCH_ROVERP1 is not set -# CONFIG_ARCH_ROVERP5P is not set -# CONFIG_MACH_XSCALE_PALMLD is not set -# CONFIG_MACH_T3XSCALE is not set -# CONFIG_MACH_RECON is not set -# CONFIG_MACH_GHI270HG is not set -# CONFIG_MACH_GHI270 is not set -# CONFIG_MACH_LOOXC550 is not set -# CONFIG_PXA_SHARPSL is not set # CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set CONFIG_PXA25x=y +# CONFIG_PXA_PWM is not set + +# +# Boot options +# # -# Linux As Bootloader +# Power management # -# CONFIG_LAB is not set # # Processor Type @@ -215,6 +208,7 @@ CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y @@ -232,11 +226,9 @@ CONFIG_XSCALE_PMU=y # # Bus support # - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y @@ -245,11 +237,14 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -CONFIG_PCMCIA_PXA2XX=m # # Kernel Features # +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set CONFIG_HZ=100 CONFIG_AEABI=y @@ -262,9 +257,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_ALIGNMENT_TRAP=y # @@ -275,7 +274,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y -# CONFIG_TXTOFFSET_DELTA is not set +CONFIG_ATAGS_PROC=y # # CPU Frequency scaling @@ -304,11 +303,12 @@ CONFIG_BINFMT_MISC=y # Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set -# CONFIG_DPM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -318,13 +318,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -339,35 +339,40 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -380,10 +385,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -391,15 +392,74 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set +# CONFIG_CAN is not set +CONFIG_IRDA=y + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +CONFIG_PXA_FICP=y +# CONFIG_MCS_FIR is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m -# CONFIG_IEEE80211_CRYPT_CCMP is not set -# CONFIG_IEEE80211_CRYPT_TKIP is not set -# CONFIG_IEEE80211_SOFTMAC is not set -CONFIG_WIRELESS_EXT=y +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -408,38 +468,32 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_PARTITIONS is not set # # User Modules And Translation Layers # -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set # CONFIG_MTD_BLOCK_RO is not set # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -459,7 +513,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -482,82 +535,43 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_H1900 is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_SHARPSL is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=m -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECS is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set @@ -565,7 +579,7 @@ CONFIG_SCSI=m # # SCSI support type (disk, tape, CD-ROM) # -# CONFIG_BLK_DEV_SD is not set +CONFIG_BLK_DEV_SD=m # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set @@ -579,6 +593,7 @@ CONFIG_SCSI=m # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -586,132 +601,78 @@ CONFIG_SCSI=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_PMP is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +CONFIG_PATA_PCMCIA=m +# CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set # CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y # CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set +# CONFIG_LIBERTAS is not set +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set # CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -# CONFIG_HOSTAP_FIRMWARE is not set -# CONFIG_HOSTAP_CS is not set -# CONFIG_ACX is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -719,38 +680,48 @@ CONFIG_NET_WIRELESS=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=m -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_LED_TRIGGER is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=m # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_WM9705=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_INPUT_MISC is not set # @@ -763,9 +734,11 @@ CONFIG_TOUCHSCREEN_WM9713=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -777,25 +750,12 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_PXA is not set -# CONFIG_RS232_SERIAL is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set -# CONFIG_SA1100_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_TIHTC is not set # # PCMCIA character devices @@ -803,117 +763,79 @@ CONFIG_HW_RANDOM=m # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set -# CONFIG_POWER_SUPPLY is not set - -# -# L3 serial bus support -# -# CONFIG_L3 is not set - -# -# Misc devices +# I2C GPIO expanders: # # -# Multimedia Capabilities Port drivers +# PCI GPIO expanders: # -# CONFIG_ADC is not set # -# Compaq/iPAQ Drivers +# SPI GPIO expanders: # +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Compaq/HP iPAQ Drivers +# Sonics Silicon Backplane # -# CONFIG_IPAQ_SLEEVE is not set -# CONFIG_SLEEVE_DEBUG is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +CONFIG_MFD_CORE=y # CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC2 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_BBKEYS is not set -# CONFIG_HTC_ASIC3_DS1WM is not set -# CONFIG_SOC_SAMCOP is not set -# CONFIG_SOC_HAMCOP is not set -# CONFIG_SOC_MQ11XX is not set -CONFIG_SOC_T7L66XB=y -# CONFIG_SOC_TC6387XB is not set -CONFIG_SOC_TC6393XB=y -# CONFIG_SOC_TSC2101 is not set -# CONFIG_SOC_TSC2200 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# +# CONFIG_HTC_PASIC3 is not set +CONFIG_MFD_TC6393XB=y # -# LED Triggers +# Multimedia devices # -# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # -# Multimedia devices +# Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -923,14 +845,25 @@ CONFIG_FB_CFB_IMAGEBLIT=y # # Frame buffer hardware drivers # -# CONFIG_FB_IMAGEON is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y +# CONFIG_FB_PXA_SMARTPANEL is not set # CONFIG_FB_PXA_PARAMETERS is not set # CONFIG_FB_MBX is not set CONFIG_FB_W100=y +# CONFIG_FB_AM200EPD is not set # CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_VSFB is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -938,6 +871,7 @@ CONFIG_FB_W100=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set @@ -945,28 +879,13 @@ CONFIG_FONTS=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set -CONFIG_FONT_ACORN_8x8=y -# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# +# CONFIG_LOGO is not set CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -980,125 +899,75 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# +CONFIG_SND_ARM=y # CONFIG_SND_PXA2XX_AC97 is not set -# CONFIG_SND_RECON is not set - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# SoC audio support -# -CONFIG_SND_SOC_AC97_BUS=y +# CONFIG_SND_USB is not set +# CONFIG_SND_PCMCIA is not set CONFIG_SND_SOC=m - -# -# SoC Platforms -# - -# -# SoC Audio for the Atmel AT91 -# - -# -# SoC Audio for the Intel PXA2xx -# +CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_PXA2XX_SOC=m CONFIG_SND_PXA2XX_SOC_AC97=m -CONFIG_SND_PXA2XX_SOC_E740_WM9705=m -CONFIG_SND_PXA2XX_SOC_E750_WM9705=m -CONFIG_SND_PXA2XX_SOC_E800_WM9712=m -# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set -# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set -# CONFIG_SND_PXA2XX_SOC_H5000 is not set - -# -# SoC Audio for the Freescale i.MX -# - -# -# SoC Audio for the Samsung S3C24XX -# -# CONFIG_SND_SOC_AC97_CODEC is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8750 is not set -# CONFIG_SND_SOC_WM8753 is not set -# CONFIG_SND_SOC_WM8772 is not set -# CONFIG_SND_SOC_WM8971 is not set -# CONFIG_SND_SOC_WM8956 is not set -# CONFIG_SND_SOC_WM8960 is not set -# CONFIG_SND_SOC_WM8976 is not set -# CONFIG_SND_SOC_WM8974 is not set -# CONFIG_SND_SOC_WM8980 is not set -CONFIG_SND_SOC_WM9705=m -# CONFIG_SND_SOC_WM9713 is not set +CONFIG_SND_PXA2XX_SOC_E800=m CONFIG_SND_SOC_WM9712=m -# CONFIG_SND_SOC_UDA1380 is not set -# CONFIG_SND_SOC_AK4535 is not set - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# HID Devices +# USB Input Devices # -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=m -CONFIG_USB_DEBUG=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1107,68 +976,19 @@ CONFIG_USB_DYNAMIC_MINORS=y # # may also be needed; see USB_STORAGE Help for more information # -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set +CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1192,56 +1012,57 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set +CONFIG_USB_GADGET_PXA25X=y +CONFIG_USB_PXA25X=y +CONFIG_USB_PXA25X_SMALL=y +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_MQ11XX is not set # CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set # CONFIG_USB_GADGET_DUALSPEED is not set # CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y +CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_CHAR is not set -# CONFIG_USB_PXA2XX_GPIO is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y # -# MMC/SD Card support +# MMC/SD Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y -# CONFIG_MMC_PXA is not set -CONFIG_MMC_TMIO=y -# CONFIG_MMC_SAMCOP is not set +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# Real Time Clock +# MMC/SD Host Controller Drivers # +# CONFIG_MMC_PXA is not set +# CONFIG_MMC_SDHCI is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -1255,14 +1076,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1292,7 +1110,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1305,30 +1122,21 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1341,7 +1149,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1363,10 +1170,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1407,30 +1211,32 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_FRAME_POINTER=y +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_USER is not set # @@ -1438,61 +1244,102 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Hardware crypto devices +# Compression # +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..2a84d557adc272e76c783f1872bd5643604b55d0 --- /dev/null +++ b/arch/arm/configs/ezx_defconfig @@ -0,0 +1,1614 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc3 +# Mon Jul 7 17:52:21 2008 +# +CONFIG_ARM=y +CONFIG_HAVE_PWM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_PCM027 is not set +CONFIG_PXA_EZX=y +CONFIG_MACH_EZX_A780=y +CONFIG_MACH_EZX_E680=y +CONFIG_MACH_EZX_A1200=y +CONFIG_MACH_EZX_A910=y +CONFIG_MACH_EZX_E6=y +CONFIG_MACH_EZX_E2=y +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y +CONFIG_PXA_PWM=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CT_PROTO_DCCP is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_LL is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PXA2XX is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_PXA27x=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_PCAP=y +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TC6393XB is not set +CONFIG_EZX_PCAP=y + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_PXA27x is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_SMARTPANEL is not set +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_AM200EPD is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_PWM=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# SPI devices +# + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_M66592 is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +# CONFIG_MMC_SPI is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=m +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig index ef903bed061e602cc04849b22245e309519fed18..5cbd815896474350c4ec5fa15fbfb5fb1dea38a2 100644 --- a/arch/arm/configs/qil-a9260_defconfig +++ b/arch/arm/configs/qil-a9260_defconfig @@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig index 8688362bcf7b18ffb7525954c4a34112dccf6db9..1174e276487577d92585066e5f69b78aae2b57e2 100644 --- a/arch/arm/configs/sam9_l9260_defconfig +++ b/arch/arm/configs/sam9_l9260_defconfig @@ -429,7 +429,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set CONFIG_MTD_NAND_PLATFORM=y # CONFIG_MTD_ONENAND is not set diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig index 3680bd2df26d8ad65536d80131ef8b4e024fdf8a..fcb4aaabd439d8c8a0995501f1427aa22cfe653d 100644 --- a/arch/arm/configs/usb-a9260_defconfig +++ b/arch/arm/configs/usb-a9260_defconfig @@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig index 48d455bc73631394c70934f7a9697091f4d2662a..b786e0407e8e08ba11c7efea9773cd12a2c127a1 100644 --- a/arch/arm/configs/usb-a9263_defconfig +++ b/arch/arm/configs/usb-a9263_defconfig @@ -450,10 +450,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig index 26de37f74686d3be37ad8f2b19f91480d953e699..a9f41c24c9dc2d05b7331b0e58c60aa596c90ebf 100644 --- a/arch/arm/configs/yl9200_defconfig +++ b/arch/arm/configs/yl9200_defconfig @@ -421,7 +421,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set CONFIG_MTD_NAND_PLATFORM=y # CONFIG_MTD_ALAUDA is not set diff --git a/include/asm-arm/Kbuild b/arch/arm/include/asm/Kbuild similarity index 100% rename from include/asm-arm/Kbuild rename to arch/arm/include/asm/Kbuild diff --git a/include/asm-arm/a.out-core.h b/arch/arm/include/asm/a.out-core.h similarity index 100% rename from include/asm-arm/a.out-core.h rename to arch/arm/include/asm/a.out-core.h diff --git a/include/asm-arm/a.out.h b/arch/arm/include/asm/a.out.h similarity index 100% rename from include/asm-arm/a.out.h rename to arch/arm/include/asm/a.out.h diff --git a/include/asm-arm/assembler.h b/arch/arm/include/asm/assembler.h similarity index 98% rename from include/asm-arm/assembler.h rename to arch/arm/include/asm/assembler.h index 911393b2c6f000cc39bf84d73a7385883c105e5f..6116e4893c0ade4bc478996a82c316ce5c99a64e 100644 --- a/include/asm-arm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/assembler.h + * arch/arm/include/asm/assembler.h * * Copyright (C) 1996-2000 Russell King * diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h new file mode 100644 index 0000000000000000000000000000000000000000..325f881ccb50204041ed15b824ae0b73e2dcae3f --- /dev/null +++ b/arch/arm/include/asm/atomic.h @@ -0,0 +1,212 @@ +/* + * arch/arm/include/asm/atomic.h + * + * Copyright (C) 1996 Russell King. + * Copyright (C) 2002 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_ATOMIC_H +#define __ASM_ARM_ATOMIC_H + +#include +#include + +typedef struct { volatile int counter; } atomic_t; + +#define ATOMIC_INIT(i) { (i) } + +#ifdef __KERNEL__ + +#define atomic_read(v) ((v)->counter) + +#if __LINUX_ARM_ARCH__ >= 6 + +/* + * ARMv6 UP and SMP safe atomic ops. We use load exclusive and + * store exclusive to ensure that these are atomic. We may loop + * to ensure that the update happens. Writing to 'v->counter' + * without using the following operations WILL break the atomic + * nature of these ops. + */ +static inline void atomic_set(atomic_t *v, int i) +{ + unsigned long tmp; + + __asm__ __volatile__("@ atomic_set\n" +"1: ldrex %0, [%1]\n" +" strex %0, %2, [%1]\n" +" teq %0, #0\n" +" bne 1b" + : "=&r" (tmp) + : "r" (&v->counter), "r" (i) + : "cc"); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_add_return\n" +"1: ldrex %0, [%2]\n" +" add %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); + + return result; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_sub_return\n" +"1: ldrex %0, [%2]\n" +" sub %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); + + return result; +} + +static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) +{ + unsigned long oldval, res; + + do { + __asm__ __volatile__("@ atomic_cmpxchg\n" + "ldrex %1, [%2]\n" + "mov %0, #0\n" + "teq %1, %3\n" + "strexeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (&ptr->counter), "Ir" (old), "r" (new) + : "cc"); + } while (res); + + return oldval; +} + +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +{ + unsigned long tmp, tmp2; + + __asm__ __volatile__("@ atomic_clear_mask\n" +"1: ldrex %0, [%2]\n" +" bic %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (tmp), "=&r" (tmp2) + : "r" (addr), "Ir" (mask) + : "cc"); +} + +#else /* ARM_ARCH_6 */ + +#include + +#ifdef CONFIG_SMP +#error SMP not supported on pre-ARMv6 CPUs +#endif + +#define atomic_set(v,i) (((v)->counter) = (i)) + +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long flags; + int val; + + raw_local_irq_save(flags); + val = v->counter; + v->counter = val += i; + raw_local_irq_restore(flags); + + return val; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long flags; + int val; + + raw_local_irq_save(flags); + val = v->counter; + v->counter = val -= i; + raw_local_irq_restore(flags); + + return val; +} + +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + raw_local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + raw_local_irq_restore(flags); + + return ret; +} + +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +{ + unsigned long flags; + + raw_local_irq_save(flags); + *addr &= ~mask; + raw_local_irq_restore(flags); +} + +#endif /* __LINUX_ARM_ARCH__ */ + +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + + c = atomic_read(v); + while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c) + c = old; + return c != u; +} +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#define atomic_add(i, v) (void) atomic_add_return(i, v) +#define atomic_inc(v) (void) atomic_add_return(1, v) +#define atomic_sub(i, v) (void) atomic_sub_return(i, v) +#define atomic_dec(v) (void) atomic_sub_return(1, v) + +#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) +#define atomic_inc_return(v) (atomic_add_return(1, v)) +#define atomic_dec_return(v) (atomic_sub_return(1, v)) +#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) + +#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) + +/* Atomic operations are already serializing on ARM */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include +#endif +#endif diff --git a/include/asm-arm/auxvec.h b/arch/arm/include/asm/auxvec.h similarity index 100% rename from include/asm-arm/auxvec.h rename to arch/arm/include/asm/auxvec.h diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h new file mode 100644 index 0000000000000000000000000000000000000000..9a1db20e032a07eb744aba50c1c60a28d0a0b381 --- /dev/null +++ b/arch/arm/include/asm/bitops.h @@ -0,0 +1,340 @@ +/* + * Copyright 1995, Russell King. + * Various bits and pieces copyrights include: + * Linus Torvalds (test_bit). + * Big endian support: Copyright 2001, Nicolas Pitre + * reworked by rmk. + * + * bit 0 is the LSB of an "unsigned long" quantity. + * + * Please note that the code in this file should never be included + * from user space. Many of these are not implemented in assembler + * since they would be too costly. Also, they require privileged + * instructions (which are not available from user mode) to ensure + * that they are atomic. + */ + +#ifndef __ASM_ARM_BITOPS_H +#define __ASM_ARM_BITOPS_H + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include +#include + +#define smp_mb__before_clear_bit() mb() +#define smp_mb__after_clear_bit() mb() + +/* + * These functions are the basis of our bit ops. + * + * First, the atomic bitops. These use native endian. + */ +static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + raw_local_irq_save(flags); + *p |= mask; + raw_local_irq_restore(flags); +} + +static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + raw_local_irq_save(flags); + *p &= ~mask; + raw_local_irq_restore(flags); +} + +static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + raw_local_irq_save(flags); + *p ^= mask; + raw_local_irq_restore(flags); +} + +static inline int +____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned int res; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + raw_local_irq_save(flags); + res = *p; + *p = res | mask; + raw_local_irq_restore(flags); + + return res & mask; +} + +static inline int +____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned int res; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + raw_local_irq_save(flags); + res = *p; + *p = res & ~mask; + raw_local_irq_restore(flags); + + return res & mask; +} + +static inline int +____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned int res; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + raw_local_irq_save(flags); + res = *p; + *p = res ^ mask; + raw_local_irq_restore(flags); + + return res & mask; +} + +#include + +/* + * A note about Endian-ness. + * ------------------------- + * + * When the ARM is put into big endian mode via CR15, the processor + * merely swaps the order of bytes within words, thus: + * + * ------------ physical data bus bits ----------- + * D31 ... D24 D23 ... D16 D15 ... D8 D7 ... D0 + * little byte 3 byte 2 byte 1 byte 0 + * big byte 0 byte 1 byte 2 byte 3 + * + * This means that reading a 32-bit word at address 0 returns the same + * value irrespective of the endian mode bit. + * + * Peripheral devices should be connected with the data bus reversed in + * "Big Endian" mode. ARM Application Note 61 is applicable, and is + * available from http://www.arm.com/. + * + * The following assumes that the data bus connectivity for big endian + * mode has been followed. + * + * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0. + */ + +/* + * Little endian assembly bitops. nr = 0 -> byte 0 bit 0. + */ +extern void _set_bit_le(int nr, volatile unsigned long * p); +extern void _clear_bit_le(int nr, volatile unsigned long * p); +extern void _change_bit_le(int nr, volatile unsigned long * p); +extern int _test_and_set_bit_le(int nr, volatile unsigned long * p); +extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p); +extern int _test_and_change_bit_le(int nr, volatile unsigned long * p); +extern int _find_first_zero_bit_le(const void * p, unsigned size); +extern int _find_next_zero_bit_le(const void * p, int size, int offset); +extern int _find_first_bit_le(const unsigned long *p, unsigned size); +extern int _find_next_bit_le(const unsigned long *p, int size, int offset); + +/* + * Big endian assembly bitops. nr = 0 -> byte 3 bit 0. + */ +extern void _set_bit_be(int nr, volatile unsigned long * p); +extern void _clear_bit_be(int nr, volatile unsigned long * p); +extern void _change_bit_be(int nr, volatile unsigned long * p); +extern int _test_and_set_bit_be(int nr, volatile unsigned long * p); +extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p); +extern int _test_and_change_bit_be(int nr, volatile unsigned long * p); +extern int _find_first_zero_bit_be(const void * p, unsigned size); +extern int _find_next_zero_bit_be(const void * p, int size, int offset); +extern int _find_first_bit_be(const unsigned long *p, unsigned size); +extern int _find_next_bit_be(const unsigned long *p, int size, int offset); + +#ifndef CONFIG_SMP +/* + * The __* form of bitops are non-atomic and may be reordered. + */ +#define ATOMIC_BITOP_LE(name,nr,p) \ + (__builtin_constant_p(nr) ? \ + ____atomic_##name(nr, p) : \ + _##name##_le(nr,p)) + +#define ATOMIC_BITOP_BE(name,nr,p) \ + (__builtin_constant_p(nr) ? \ + ____atomic_##name(nr, p) : \ + _##name##_be(nr,p)) +#else +#define ATOMIC_BITOP_LE(name,nr,p) _##name##_le(nr,p) +#define ATOMIC_BITOP_BE(name,nr,p) _##name##_be(nr,p) +#endif + +#define NONATOMIC_BITOP(name,nr,p) \ + (____nonatomic_##name(nr, p)) + +#ifndef __ARMEB__ +/* + * These are the little endian, atomic definitions. + */ +#define set_bit(nr,p) ATOMIC_BITOP_LE(set_bit,nr,p) +#define clear_bit(nr,p) ATOMIC_BITOP_LE(clear_bit,nr,p) +#define change_bit(nr,p) ATOMIC_BITOP_LE(change_bit,nr,p) +#define test_and_set_bit(nr,p) ATOMIC_BITOP_LE(test_and_set_bit,nr,p) +#define test_and_clear_bit(nr,p) ATOMIC_BITOP_LE(test_and_clear_bit,nr,p) +#define test_and_change_bit(nr,p) ATOMIC_BITOP_LE(test_and_change_bit,nr,p) +#define find_first_zero_bit(p,sz) _find_first_zero_bit_le(p,sz) +#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_le(p,sz,off) +#define find_first_bit(p,sz) _find_first_bit_le(p,sz) +#define find_next_bit(p,sz,off) _find_next_bit_le(p,sz,off) + +#define WORD_BITOFF_TO_LE(x) ((x)) + +#else + +/* + * These are the big endian, atomic definitions. + */ +#define set_bit(nr,p) ATOMIC_BITOP_BE(set_bit,nr,p) +#define clear_bit(nr,p) ATOMIC_BITOP_BE(clear_bit,nr,p) +#define change_bit(nr,p) ATOMIC_BITOP_BE(change_bit,nr,p) +#define test_and_set_bit(nr,p) ATOMIC_BITOP_BE(test_and_set_bit,nr,p) +#define test_and_clear_bit(nr,p) ATOMIC_BITOP_BE(test_and_clear_bit,nr,p) +#define test_and_change_bit(nr,p) ATOMIC_BITOP_BE(test_and_change_bit,nr,p) +#define find_first_zero_bit(p,sz) _find_first_zero_bit_be(p,sz) +#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_be(p,sz,off) +#define find_first_bit(p,sz) _find_first_bit_be(p,sz) +#define find_next_bit(p,sz,off) _find_next_bit_be(p,sz,off) + +#define WORD_BITOFF_TO_LE(x) ((x) ^ 0x18) + +#endif + +#if __LINUX_ARM_ARCH__ < 5 + +#include +#include +#include +#include + +#else + +static inline int constant_fls(int x) +{ + int r = 32; + + if (!x) + return 0; + if (!(x & 0xffff0000u)) { + x <<= 16; + r -= 16; + } + if (!(x & 0xff000000u)) { + x <<= 8; + r -= 8; + } + if (!(x & 0xf0000000u)) { + x <<= 4; + r -= 4; + } + if (!(x & 0xc0000000u)) { + x <<= 2; + r -= 2; + } + if (!(x & 0x80000000u)) { + x <<= 1; + r -= 1; + } + return r; +} + +/* + * On ARMv5 and above those functions can be implemented around + * the clz instruction for much better code efficiency. + */ + +#define __fls(x) \ + ( __builtin_constant_p(x) ? constant_fls(x) : \ + ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) ) + +/* Implement fls() in C so that 64-bit args are suitably truncated */ +static inline int fls(int x) +{ + return __fls(x); +} + +#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); }) +#define __ffs(x) (ffs(x) - 1) +#define ffz(x) __ffs( ~(x) ) + +#endif + +#include + +#include +#include +#include + +/* + * Ext2 is defined to use little-endian byte ordering. + * These do not need to be atomic. + */ +#define ext2_set_bit(nr,p) \ + __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_set_bit_atomic(lock,nr,p) \ + test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_clear_bit(nr,p) \ + __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_clear_bit_atomic(lock,nr,p) \ + test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_test_bit(nr,p) \ + test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_find_first_zero_bit(p,sz) \ + _find_first_zero_bit_le(p,sz) +#define ext2_find_next_zero_bit(p,sz,off) \ + _find_next_zero_bit_le(p,sz,off) +#define ext2_find_next_bit(p, sz, off) \ + _find_next_bit_le(p, sz, off) + +/* + * Minix is defined to use little-endian byte ordering. + * These do not need to be atomic. + */ +#define minix_set_bit(nr,p) \ + __set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define minix_test_bit(nr,p) \ + test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define minix_test_and_set_bit(nr,p) \ + __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define minix_test_and_clear_bit(nr,p) \ + __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define minix_find_first_zero_bit(p,sz) \ + _find_first_zero_bit_le(p,sz) + +#endif /* __KERNEL__ */ + +#endif /* _ARM_BITOPS_H */ diff --git a/include/asm-arm/bug.h b/arch/arm/include/asm/bug.h similarity index 100% rename from include/asm-arm/bug.h rename to arch/arm/include/asm/bug.h diff --git a/arch/arm/include/asm/bugs.h b/arch/arm/include/asm/bugs.h new file mode 100644 index 0000000000000000000000000000000000000000..a97f1ea708d19f339649a2ece287a69a5fe32a40 --- /dev/null +++ b/arch/arm/include/asm/bugs.h @@ -0,0 +1,21 @@ +/* + * arch/arm/include/asm/bugs.h + * + * Copyright (C) 1995-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_BUGS_H +#define __ASM_BUGS_H + +#ifdef CONFIG_MMU +extern void check_writebuffer_bugs(void); + +#define check_bugs() check_writebuffer_bugs() +#else +#define check_bugs() do { } while (0) +#endif + +#endif diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h new file mode 100644 index 0000000000000000000000000000000000000000..4fbfb22f65a0f4444818e455422b60d3e61545d0 --- /dev/null +++ b/arch/arm/include/asm/byteorder.h @@ -0,0 +1,58 @@ +/* + * arch/arm/include/asm/byteorder.h + * + * ARM Endian-ness. In little endian mode, the data bus is connected such + * that byte accesses appear as: + * 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31 + * and word accesses (data or instruction) appear as: + * d0...d31 + * + * When in big endian mode, byte accesses appear as: + * 0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7 + * and word accesses (data or instruction) appear as: + * d0...d31 + */ +#ifndef __ASM_ARM_BYTEORDER_H +#define __ASM_ARM_BYTEORDER_H + +#include +#include + +static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) +{ + __u32 t; + +#ifndef __thumb__ + if (!__builtin_constant_p(x)) { + /* + * The compiler needs a bit of a hint here to always do the + * right thing and not screw it up to different degrees + * depending on the gcc version. + */ + asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); + } else +#endif + t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ + + x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ + t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ + x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ + + return x; +} + +#define __arch__swab32(x) ___arch__swab32(x) + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#ifdef __ARMEB__ +#include +#else +#include +#endif + +#endif + diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h new file mode 100644 index 0000000000000000000000000000000000000000..cb7a9e97fd7ef7807161f509e0260a6fa94233cc --- /dev/null +++ b/arch/arm/include/asm/cache.h @@ -0,0 +1,10 @@ +/* + * arch/arm/include/asm/cache.h + */ +#ifndef __ASMARM_CACHE_H +#define __ASMARM_CACHE_H + +#define L1_CACHE_SHIFT 5 +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#endif diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h new file mode 100644 index 0000000000000000000000000000000000000000..9073d9c6567e7c8b8065534563bee01ce83c9e37 --- /dev/null +++ b/arch/arm/include/asm/cacheflush.h @@ -0,0 +1,537 @@ +/* + * arch/arm/include/asm/cacheflush.h + * + * Copyright (C) 1999-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_CACHEFLUSH_H +#define _ASMARM_CACHEFLUSH_H + +#include +#include + +#include +#include + +#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) + +/* + * Cache Model + * =========== + */ +#undef _CACHE +#undef MULTI_CACHE + +#if defined(CONFIG_CPU_CACHE_V3) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE v3 +# endif +#endif + +#if defined(CONFIG_CPU_CACHE_V4) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE v4 +# endif +#endif + +#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \ + defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) +# define MULTI_CACHE 1 +#endif + +#if defined(CONFIG_CPU_ARM926T) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE arm926 +# endif +#endif + +#if defined(CONFIG_CPU_ARM940T) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE arm940 +# endif +#endif + +#if defined(CONFIG_CPU_ARM946E) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE arm946 +# endif +#endif + +#if defined(CONFIG_CPU_CACHE_V4WB) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE v4wb +# endif +#endif + +#if defined(CONFIG_CPU_XSCALE) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE xscale +# endif +#endif + +#if defined(CONFIG_CPU_XSC3) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE xsc3 +# endif +#endif + +#if defined(CONFIG_CPU_FEROCEON) +# define MULTI_CACHE 1 +#endif + +#if defined(CONFIG_CPU_V6) +//# ifdef _CACHE +# define MULTI_CACHE 1 +//# else +//# define _CACHE v6 +//# endif +#endif + +#if defined(CONFIG_CPU_V7) +//# ifdef _CACHE +# define MULTI_CACHE 1 +//# else +//# define _CACHE v7 +//# endif +#endif + +#if !defined(_CACHE) && !defined(MULTI_CACHE) +#error Unknown cache maintainence model +#endif + +/* + * This flag is used to indicate that the page pointed to by a pte + * is dirty and requires cleaning before returning it to the user. + */ +#define PG_dcache_dirty PG_arch_1 + +/* + * MM Cache Management + * =================== + * + * The arch/arm/mm/cache-*.S and arch/arm/mm/proc-*.S files + * implement these methods. + * + * Start addresses are inclusive and end addresses are exclusive; + * start addresses should be rounded down, end addresses up. + * + * See Documentation/cachetlb.txt for more information. + * Please note that the implementation of these, and the required + * effects are cache-type (VIVT/VIPT/PIPT) specific. + * + * flush_cache_kern_all() + * + * Unconditionally clean and invalidate the entire cache. + * + * flush_cache_user_mm(mm) + * + * Clean and invalidate all user space cache entries + * before a change of page tables. + * + * flush_cache_user_range(start, end, flags) + * + * Clean and invalidate a range of cache entries in the + * specified address space before a change of page tables. + * - start - user start address (inclusive, page aligned) + * - end - user end address (exclusive, page aligned) + * - flags - vma->vm_flags field + * + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * - start - virtual start address + * - end - virtual end address + * + * DMA Cache Coherency + * =================== + * + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * - start - virtual start address + * - end - virtual end address + * + * dma_clean_range(start, end) + * + * Clean (write back) the specified virtual address range. + * - start - virtual start address + * - end - virtual end address + * + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * - start - virtual start address + * - end - virtual end address + */ + +struct cpu_cache_fns { + void (*flush_kern_all)(void); + void (*flush_user_all)(void); + void (*flush_user_range)(unsigned long, unsigned long, unsigned int); + + void (*coherent_kern_range)(unsigned long, unsigned long); + void (*coherent_user_range)(unsigned long, unsigned long); + void (*flush_kern_dcache_page)(void *); + + void (*dma_inv_range)(const void *, const void *); + void (*dma_clean_range)(const void *, const void *); + void (*dma_flush_range)(const void *, const void *); +}; + +struct outer_cache_fns { + void (*inv_range)(unsigned long, unsigned long); + void (*clean_range)(unsigned long, unsigned long); + void (*flush_range)(unsigned long, unsigned long); +}; + +/* + * Select the calling method + */ +#ifdef MULTI_CACHE + +extern struct cpu_cache_fns cpu_cache; + +#define __cpuc_flush_kern_all cpu_cache.flush_kern_all +#define __cpuc_flush_user_all cpu_cache.flush_user_all +#define __cpuc_flush_user_range cpu_cache.flush_user_range +#define __cpuc_coherent_kern_range cpu_cache.coherent_kern_range +#define __cpuc_coherent_user_range cpu_cache.coherent_user_range +#define __cpuc_flush_dcache_page cpu_cache.flush_kern_dcache_page + +/* + * These are private to the dma-mapping API. Do not use directly. + * Their sole purpose is to ensure that data held in the cache + * is visible to DMA, or data written by DMA to system memory is + * visible to the CPU. + */ +#define dmac_inv_range cpu_cache.dma_inv_range +#define dmac_clean_range cpu_cache.dma_clean_range +#define dmac_flush_range cpu_cache.dma_flush_range + +#else + +#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all) +#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all) +#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) +#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) +#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) +#define __cpuc_flush_dcache_page __glue(_CACHE,_flush_kern_dcache_page) + +extern void __cpuc_flush_kern_all(void); +extern void __cpuc_flush_user_all(void); +extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); +extern void __cpuc_coherent_kern_range(unsigned long, unsigned long); +extern void __cpuc_coherent_user_range(unsigned long, unsigned long); +extern void __cpuc_flush_dcache_page(void *); + +/* + * These are private to the dma-mapping API. Do not use directly. + * Their sole purpose is to ensure that data held in the cache + * is visible to DMA, or data written by DMA to system memory is + * visible to the CPU. + */ +#define dmac_inv_range __glue(_CACHE,_dma_inv_range) +#define dmac_clean_range __glue(_CACHE,_dma_clean_range) +#define dmac_flush_range __glue(_CACHE,_dma_flush_range) + +extern void dmac_inv_range(const void *, const void *); +extern void dmac_clean_range(const void *, const void *); +extern void dmac_flush_range(const void *, const void *); + +#endif + +#ifdef CONFIG_OUTER_CACHE + +extern struct outer_cache_fns outer_cache; + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ + if (outer_cache.inv_range) + outer_cache.inv_range(start, end); +} +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ + if (outer_cache.clean_range) + outer_cache.clean_range(start, end); +} +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ + if (outer_cache.flush_range) + outer_cache.flush_range(start, end); +} + +#else + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ } +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ } +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ } + +#endif + +/* + * flush_cache_vmap() is used when creating mappings (eg, via vmap, + * vmalloc, ioremap etc) in kernel space for pages. Since the + * direct-mappings of these pages may contain cached data, we need + * to do a full cache flush to ensure that writebacks don't corrupt + * data placed into these pages via the new mappings. + */ +#define flush_cache_vmap(start, end) flush_cache_all() +#define flush_cache_vunmap(start, end) flush_cache_all() + +/* + * Copy user data from/to a page which is mapped into a different + * processes address space. Really, we want to allow our "user + * space" model to handle this. + */ +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + flush_ptrace_access(vma, page, vaddr, dst, len, 1);\ + } while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + } while (0) + +/* + * Convert calls to our calling convention. + */ +#define flush_cache_all() __cpuc_flush_kern_all() +#ifndef CONFIG_CPU_CACHE_VIPT +static inline void flush_cache_mm(struct mm_struct *mm) +{ + if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) + __cpuc_flush_user_all(); +} + +static inline void +flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) +{ + if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) + __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), + vma->vm_flags); +} + +static inline void +flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) +{ + if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { + unsigned long addr = user_addr & PAGE_MASK; + __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); + } +} + +static inline void +flush_ptrace_access(struct vm_area_struct *vma, struct page *page, + unsigned long uaddr, void *kaddr, + unsigned long len, int write) +{ + if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { + unsigned long addr = (unsigned long)kaddr; + __cpuc_coherent_kern_range(addr, addr + len); + } +} +#else +extern void flush_cache_mm(struct mm_struct *mm); +extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); +extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn); +extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, + unsigned long uaddr, void *kaddr, + unsigned long len, int write); +#endif + +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + +/* + * flush_cache_user_range is used when we want to ensure that the + * Harvard caches are synchronised for the user space address range. + * This is used for the ARM private sys_cacheflush system call. + */ +#define flush_cache_user_range(vma,start,end) \ + __cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end)) + +/* + * Perform necessary cache operations to ensure that data previously + * stored within this range of addresses can be executed by the CPU. + */ +#define flush_icache_range(s,e) __cpuc_coherent_kern_range(s,e) + +/* + * Perform necessary cache operations to ensure that the TLB will + * see data written in the specified area. + */ +#define clean_dcache_area(start,size) cpu_dcache_clean_area(start, size) + +/* + * flush_dcache_page is used when the kernel has written to the page + * cache page at virtual address page->virtual. + * + * If this page isn't mapped (ie, page_mapping == NULL), or it might + * have userspace mappings, then we _must_ always clean + invalidate + * the dcache entries associated with the kernel mapping. + * + * Otherwise we can defer the operation, and clean the cache when we are + * about to change to user space. This is the same method as used on SPARC64. + * See update_mmu_cache for the user space part. + */ +extern void flush_dcache_page(struct page *); + +extern void __flush_dcache_page(struct address_space *mapping, struct page *page); + +static inline void __flush_icache_all(void) +{ + asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" + : + : "r" (0)); +} + +#define ARCH_HAS_FLUSH_ANON_PAGE +static inline void flush_anon_page(struct vm_area_struct *vma, + struct page *page, unsigned long vmaddr) +{ + extern void __flush_anon_page(struct vm_area_struct *vma, + struct page *, unsigned long); + if (PageAnon(page)) + __flush_anon_page(vma, page, vmaddr); +} + +#define flush_dcache_mmap_lock(mapping) \ + spin_lock_irq(&(mapping)->tree_lock) +#define flush_dcache_mmap_unlock(mapping) \ + spin_unlock_irq(&(mapping)->tree_lock) + +#define flush_icache_user_range(vma,page,addr,len) \ + flush_dcache_page(page) + +/* + * We don't appear to need to do anything here. In fact, if we did, we'd + * duplicate cache flushing elsewhere performed by flush_dcache_page(). + */ +#define flush_icache_page(vma,page) do { } while (0) + +static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt, + unsigned offset, size_t size) +{ + const void *start = (void __force *)virt + offset; + dmac_inv_range(start, start + size); +} + +#define __cacheid_present(val) (val != read_cpuid(CPUID_ID)) +#define __cacheid_type_v7(val) ((val & (7 << 29)) == (4 << 29)) + +#define __cacheid_vivt_prev7(val) ((val & (15 << 25)) != (14 << 25)) +#define __cacheid_vipt_prev7(val) ((val & (15 << 25)) == (14 << 25)) +#define __cacheid_vipt_nonaliasing_prev7(val) ((val & (15 << 25 | 1 << 23)) == (14 << 25)) +#define __cacheid_vipt_aliasing_prev7(val) ((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23)) + +#define __cacheid_vivt(val) (__cacheid_type_v7(val) ? 0 : __cacheid_vivt_prev7(val)) +#define __cacheid_vipt(val) (__cacheid_type_v7(val) ? 1 : __cacheid_vipt_prev7(val)) +#define __cacheid_vipt_nonaliasing(val) (__cacheid_type_v7(val) ? 1 : __cacheid_vipt_nonaliasing_prev7(val)) +#define __cacheid_vipt_aliasing(val) (__cacheid_type_v7(val) ? 0 : __cacheid_vipt_aliasing_prev7(val)) +#define __cacheid_vivt_asid_tagged_instr(val) (__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0) + +#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT) +/* + * VIVT caches only + */ +#define cache_is_vivt() 1 +#define cache_is_vipt() 0 +#define cache_is_vipt_nonaliasing() 0 +#define cache_is_vipt_aliasing() 0 +#define icache_is_vivt_asid_tagged() 0 + +#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT) +/* + * VIPT caches only + */ +#define cache_is_vivt() 0 +#define cache_is_vipt() 1 +#define cache_is_vipt_nonaliasing() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_vipt_nonaliasing(__val); \ + }) + +#define cache_is_vipt_aliasing() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_vipt_aliasing(__val); \ + }) + +#define icache_is_vivt_asid_tagged() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_vivt_asid_tagged_instr(__val); \ + }) + +#else +/* + * VIVT or VIPT caches. Note that this is unreliable since ARM926 + * and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test. + * There's no way to tell from the CacheType register what type (!) + * the cache is. + */ +#define cache_is_vivt() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + (!__cacheid_present(__val)) || __cacheid_vivt(__val); \ + }) + +#define cache_is_vipt() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_present(__val) && __cacheid_vipt(__val); \ + }) + +#define cache_is_vipt_nonaliasing() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_present(__val) && \ + __cacheid_vipt_nonaliasing(__val); \ + }) + +#define cache_is_vipt_aliasing() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_present(__val) && \ + __cacheid_vipt_aliasing(__val); \ + }) + +#define icache_is_vivt_asid_tagged() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_present(__val) && \ + __cacheid_vivt_asid_tagged_instr(__val); \ + }) + +#endif + +#endif diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h new file mode 100644 index 0000000000000000000000000000000000000000..6dcc164308688c8efdf7f688f239169537470da4 --- /dev/null +++ b/arch/arm/include/asm/checksum.h @@ -0,0 +1,139 @@ +/* + * arch/arm/include/asm/checksum.h + * + * IP checksum routines + * + * Copyright (C) Original authors of ../asm-i386/checksum.h + * Copyright (C) 1996-1999 Russell King + */ +#ifndef __ASM_ARM_CHECKSUM_H +#define __ASM_ARM_CHECKSUM_H + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums, and handles user-space pointer exceptions correctly, when needed. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +__wsum +csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum); + +__wsum +csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr); + +/* + * Fold a partial checksum without adding pseudo headers + */ +static inline __sum16 csum_fold(__wsum sum) +{ + __asm__( + "add %0, %1, %1, ror #16 @ csum_fold" + : "=r" (sum) + : "r" (sum) + : "cc"); + return (__force __sum16)(~(__force u32)sum >> 16); +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +static inline __sum16 +ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned int tmp1; + __wsum sum; + + __asm__ __volatile__( + "ldr %0, [%1], #4 @ ip_fast_csum \n\ + ldr %3, [%1], #4 \n\ + sub %2, %2, #5 \n\ + adds %0, %0, %3 \n\ + ldr %3, [%1], #4 \n\ + adcs %0, %0, %3 \n\ + ldr %3, [%1], #4 \n\ +1: adcs %0, %0, %3 \n\ + ldr %3, [%1], #4 \n\ + tst %2, #15 @ do this carefully \n\ + subne %2, %2, #1 @ without destroying \n\ + bne 1b @ the carry flag \n\ + adcs %0, %0, %3 \n\ + adc %0, %0, #0" + : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1) + : "1" (iph), "2" (ihl) + : "cc", "memory"); + return csum_fold(sum); +} + +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + __asm__( + "adds %0, %1, %2 @ csum_tcpudp_nofold \n\ + adcs %0, %0, %3 \n" +#ifdef __ARMEB__ + "adcs %0, %0, %4 \n" +#else + "adcs %0, %0, %4, lsl #8 \n" +#endif + "adcs %0, %0, %5 \n\ + adc %0, %0, #0" + : "=&r"(sum) + : "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto)) + : "cc"); + return sum; +} +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 +ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +extern __wsum +__csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __be32 len, + __be32 proto, __wsum sum); + +static inline __sum16 +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len, + unsigned short proto, __wsum sum) +{ + return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len), + htonl(proto), sum)); +} +#endif diff --git a/include/asm-arm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h similarity index 100% rename from include/asm-arm/cnt32_to_63.h rename to arch/arm/include/asm/cnt32_to_63.h diff --git a/include/asm-arm/cpu-multi32.h b/arch/arm/include/asm/cpu-multi32.h similarity index 97% rename from include/asm-arm/cpu-multi32.h rename to arch/arm/include/asm/cpu-multi32.h index 3479de9266e5584ec6c404ea08786347d121e03c..e2b5b0b2116a705819995256e51b70bc27abb764 100644 --- a/include/asm-arm/cpu-multi32.h +++ b/arch/arm/include/asm/cpu-multi32.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/cpu-multi32.h + * arch/arm/include/asm/cpu-multi32.h * * Copyright (C) 2000 Russell King * diff --git a/include/asm-arm/cpu-single.h b/arch/arm/include/asm/cpu-single.h similarity index 97% rename from include/asm-arm/cpu-single.h rename to arch/arm/include/asm/cpu-single.h index 0b120ee36091c962c9ce5b52da1efe58cdda4cbb..f073a6d2a406bc5125c80b6e74fd8f042826daad 100644 --- a/include/asm-arm/cpu-single.h +++ b/arch/arm/include/asm/cpu-single.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/cpu-single.h + * arch/arm/include/asm/cpu-single.h * * Copyright (C) 2000 Russell King * diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h new file mode 100644 index 0000000000000000000000000000000000000000..634b2d7c612a706d8f9b5662e50d5848864cac5d --- /dev/null +++ b/arch/arm/include/asm/cpu.h @@ -0,0 +1,25 @@ +/* + * arch/arm/include/asm/cpu.h + * + * Copyright (C) 2004-2005 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_CPU_H +#define __ASM_ARM_CPU_H + +#include + +struct cpuinfo_arm { + struct cpu cpu; +#ifdef CONFIG_SMP + struct task_struct *idle; + unsigned int loops_per_jiffy; +#endif +}; + +DECLARE_PER_CPU(struct cpuinfo_arm, cpu_data); + +#endif diff --git a/include/asm-arm/cputime.h b/arch/arm/include/asm/cputime.h similarity index 100% rename from include/asm-arm/cputime.h rename to arch/arm/include/asm/cputime.h diff --git a/include/asm-arm/current.h b/arch/arm/include/asm/current.h similarity index 100% rename from include/asm-arm/current.h rename to arch/arm/include/asm/current.h diff --git a/include/asm-arm/delay.h b/arch/arm/include/asm/delay.h similarity index 100% rename from include/asm-arm/delay.h rename to arch/arm/include/asm/delay.h diff --git a/include/asm-arm/device.h b/arch/arm/include/asm/device.h similarity index 100% rename from include/asm-arm/device.h rename to arch/arm/include/asm/device.h diff --git a/include/asm-arm/div64.h b/arch/arm/include/asm/div64.h similarity index 100% rename from include/asm-arm/div64.h rename to arch/arm/include/asm/div64.h diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h new file mode 100644 index 0000000000000000000000000000000000000000..45329fca1b64e32f18ba9dc711ea8bc89f5d5576 --- /dev/null +++ b/arch/arm/include/asm/dma-mapping.h @@ -0,0 +1,458 @@ +#ifndef ASMARM_DMA_MAPPING_H +#define ASMARM_DMA_MAPPING_H + +#ifdef __KERNEL__ + +#include /* need struct page */ + +#include + +#include + +/* + * DMA-consistent mapping functions. These allocate/free a region of + * uncached, unwrite-buffered mapped memory space for use with DMA + * devices. This is the "generic" version. The PCI specific version + * is in pci.h + * + * Note: Drivers should NOT use this function directly, as it will break + * platforms with CONFIG_DMABOUNCE. + * Use the driver DMA support - see dma-mapping.h (dma_sync_*) + */ +extern void dma_cache_maint(const void *kaddr, size_t size, int rw); + +/* + * Return whether the given device DMA address mask can be supported + * properly. For example, if your device can only drive the low 24-bits + * during bus mastering, then you would pass 0x00ffffff as the mask + * to this function. + * + * FIXME: This should really be a platform specific issue - we should + * return false if GFP_DMA allocations may not satisfy the supplied 'mask'. + */ +static inline int dma_supported(struct device *dev, u64 mask) +{ + return dev->dma_mask && *dev->dma_mask != 0; +} + +static inline int dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + + *dev->dma_mask = dma_mask; + + return 0; +} + +static inline int dma_get_cache_alignment(void) +{ + return 32; +} + +static inline int dma_is_consistent(struct device *dev, dma_addr_t handle) +{ + return !!arch_is_coherent(); +} + +/* + * DMA errors are defined by all-bits-set in the DMA address. + */ +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr == ~0; +} + +/* + * Dummy noncoherent implementation. We don't provide a dma_cache_sync + * function so drivers using this API are highlighted with build warnings. + */ +static inline void * +dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) +{ + return NULL; +} + +static inline void +dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t handle) +{ +} + +/** + * dma_alloc_coherent - allocate consistent memory for DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @size: required memory size + * @handle: bus-specific DMA address + * + * Allocate some uncached, unbuffered memory for a device for + * performing DMA. This function allocates pages, and will + * return the CPU-viewed address, and sets @handle to be the + * device-viewed address. + */ +extern void * +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp); + +/** + * dma_free_coherent - free memory allocated by dma_alloc_coherent + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @size: size of memory originally requested in dma_alloc_coherent + * @cpu_addr: CPU-view address returned from dma_alloc_coherent + * @handle: device-view address returned from dma_alloc_coherent + * + * Free (and unmap) a DMA buffer previously allocated by + * dma_alloc_coherent(). + * + * References to memory and mappings associated with cpu_addr/handle + * during and after this call executing are illegal. + */ +extern void +dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t handle); + +/** + * dma_mmap_coherent - map a coherent DMA allocation into user space + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @vma: vm_area_struct describing requested user mapping + * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent + * @handle: device-view address returned from dma_alloc_coherent + * @size: size of memory originally requested in dma_alloc_coherent + * + * Map a coherent DMA buffer previously allocated by dma_alloc_coherent + * into user space. The coherent DMA buffer must not be freed by the + * driver until the user space mapping has been released. + */ +int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t handle, size_t size); + + +/** + * dma_alloc_writecombine - allocate writecombining memory for DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @size: required memory size + * @handle: bus-specific DMA address + * + * Allocate some uncached, buffered memory for a device for + * performing DMA. This function allocates pages, and will + * return the CPU-viewed address, and sets @handle to be the + * device-viewed address. + */ +extern void * +dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp); + +#define dma_free_writecombine(dev,size,cpu_addr,handle) \ + dma_free_coherent(dev,size,cpu_addr,handle) + +int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t handle, size_t size); + + +/** + * dma_map_single - map a single buffer for streaming DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @cpu_addr: CPU direct mapped address of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Ensure that any data held in the cache is appropriately discarded + * or written back. + * + * The device owns this memory once this call has completed. The CPU + * can regain ownership by calling dma_unmap_single() or + * dma_sync_single_for_cpu(). + */ +#ifndef CONFIG_DMABOUNCE +static inline dma_addr_t +dma_map_single(struct device *dev, void *cpu_addr, size_t size, + enum dma_data_direction dir) +{ + if (!arch_is_coherent()) + dma_cache_maint(cpu_addr, size, dir); + + return virt_to_dma(dev, (unsigned long)cpu_addr); +} +#else +extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction); +#endif + +/** + * dma_map_page - map a portion of a page for streaming DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @page: page that buffer resides in + * @offset: offset into page for start of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Ensure that any data held in the cache is appropriately discarded + * or written back. + * + * The device owns this memory once this call has completed. The CPU + * can regain ownership by calling dma_unmap_page() or + * dma_sync_single_for_cpu(). + */ +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_single(dev, page_address(page) + offset, size, (int)dir); +} + +/** + * dma_unmap_single - unmap a single buffer previously mapped + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @handle: DMA address of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Unmap a single streaming mode DMA translation. The handle and size + * must match what was provided in the previous dma_map_single() call. + * All other usages are undefined. + * + * After this call, reads by the CPU to the buffer are guaranteed to see + * whatever the device wrote there. + */ +#ifndef CONFIG_DMABOUNCE +static inline void +dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + /* nothing to do */ +} +#else +extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction); +#endif + +/** + * dma_unmap_page - unmap a buffer previously mapped through dma_map_page() + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @handle: DMA address of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Unmap a single streaming mode DMA translation. The handle and size + * must match what was provided in the previous dma_map_single() call. + * All other usages are undefined. + * + * After this call, reads by the CPU to the buffer are guaranteed to see + * whatever the device wrote there. + */ +static inline void +dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + dma_unmap_single(dev, handle, size, (int)dir); +} + +/** + * dma_map_sg - map a set of SG buffers for streaming mode DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @sg: list of buffers + * @nents: number of buffers to map + * @dir: DMA transfer direction + * + * Map a set of buffers described by scatterlist in streaming + * mode for DMA. This is the scatter-gather version of the + * above dma_map_single interface. Here the scatter gather list + * elements are each tagged with the appropriate dma address + * and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of + * DMA address/length pairs than there are SG table elements. + * (for example via virtual mapping capabilities) + * The routine returns the number of addr/length pairs actually + * used, at most nents. + * + * Device ownership issues as mentioned above for dma_map_single are + * the same here. + */ +#ifndef CONFIG_DMABOUNCE +static inline int +dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction dir) +{ + int i; + + for (i = 0; i < nents; i++, sg++) { + char *virt; + + sg->dma_address = page_to_dma(dev, sg_page(sg)) + sg->offset; + virt = sg_virt(sg); + + if (!arch_is_coherent()) + dma_cache_maint(virt, sg->length, dir); + } + + return nents; +} +#else +extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction); +#endif + +/** + * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @sg: list of buffers + * @nents: number of buffers to map + * @dir: DMA transfer direction + * + * Unmap a set of streaming mode DMA translations. + * Again, CPU read rules concerning calls here are the same as for + * dma_unmap_single() above. + */ +#ifndef CONFIG_DMABOUNCE +static inline void +dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction dir) +{ + + /* nothing to do */ +} +#else +extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction); +#endif + + +/** + * dma_sync_single_for_cpu + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @handle: DMA address of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Make physical memory consistent for a single streaming mode DMA + * translation after a transfer. + * + * If you perform a dma_map_single() but wish to interrogate the + * buffer using the cpu, yet do not wish to teardown the PCI dma + * mapping, you must call this function before doing so. At the + * next point you give the PCI dma address back to the card, you + * must first the perform a dma_sync_for_device, and then the + * device again owns the buffer. + */ +#ifndef CONFIG_DMABOUNCE +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + if (!arch_is_coherent()) + dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir); +} + +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + if (!arch_is_coherent()) + dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir); +} +#else +extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction); +extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction); +#endif + + +/** + * dma_sync_sg_for_cpu + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @sg: list of buffers + * @nents: number of buffers to map + * @dir: DMA transfer direction + * + * Make physical memory consistent for a set of streaming + * mode DMA translations after a transfer. + * + * The same as dma_sync_single_for_* but for a scatter-gather list, + * same rules and usage. + */ +#ifndef CONFIG_DMABOUNCE +static inline void +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction dir) +{ + int i; + + for (i = 0; i < nents; i++, sg++) { + char *virt = sg_virt(sg); + if (!arch_is_coherent()) + dma_cache_maint(virt, sg->length, dir); + } +} + +static inline void +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction dir) +{ + int i; + + for (i = 0; i < nents; i++, sg++) { + char *virt = sg_virt(sg); + if (!arch_is_coherent()) + dma_cache_maint(virt, sg->length, dir); + } +} +#else +extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction); +extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction); +#endif + +#ifdef CONFIG_DMABOUNCE +/* + * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" + * and utilize bounce buffers as needed to work around limited DMA windows. + * + * On the SA-1111, a bug limits DMA to only certain regions of RAM. + * On the IXP425, the PCI inbound window is 64MB (256MB total RAM) + * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM) + * + * The following are helper functions used by the dmabounce subystem + * + */ + +/** + * dmabounce_register_dev + * + * @dev: valid struct device pointer + * @small_buf_size: size of buffers to use with small buffer pool + * @large_buf_size: size of buffers to use with large buffer pool (can be 0) + * + * This function should be called by low-level platform code to register + * a device as requireing DMA buffer bouncing. The function will allocate + * appropriate DMA pools for the device. + * + */ +extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long); + +/** + * dmabounce_unregister_dev + * + * @dev: valid struct device pointer + * + * This function should be called by low-level platform code when device + * that was previously registered with dmabounce_register_dev is removed + * from the system. + * + */ +extern void dmabounce_unregister_dev(struct device *); + +/** + * dma_needs_bounce + * + * @dev: valid struct device pointer + * @dma_handle: dma_handle of unbounced buffer + * @size: size of region being mapped + * + * Platforms that utilize the dmabounce mechanism must implement + * this function. + * + * The dmabounce routines call this function whenever a dma-mapping + * is requested to determine whether a given buffer needs to be bounced + * or not. The function must return 0 if the buffer is OK for + * DMA access and 1 if the buffer needs to be bounced. + * + */ +extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); +#endif /* CONFIG_DMABOUNCE */ + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h new file mode 100644 index 0000000000000000000000000000000000000000..75154b1931173adc897597c228e21972594583d8 --- /dev/null +++ b/arch/arm/include/asm/dma.h @@ -0,0 +1,143 @@ +#ifndef __ASM_ARM_DMA_H +#define __ASM_ARM_DMA_H + +typedef unsigned int dmach_t; + +#include +#include +#include +#include + +/* + * This is the maximum virtual address which can be DMA'd from. + */ +#ifndef MAX_DMA_ADDRESS +#define MAX_DMA_ADDRESS 0xffffffff +#endif + +/* + * DMA modes + */ +typedef unsigned int dmamode_t; + +#define DMA_MODE_MASK 3 + +#define DMA_MODE_READ 0 +#define DMA_MODE_WRITE 1 +#define DMA_MODE_CASCADE 2 +#define DMA_AUTOINIT 4 + +extern spinlock_t dma_spin_lock; + +static inline unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static inline void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + */ +#define clear_dma_ff(channel) + +/* Set only the page register bits of the transfer address. + * + * NOTE: This is an architecture specific function, and should + * be hidden from the drivers + */ +extern void set_dma_page(dmach_t channel, char pagenr); + +/* Request a DMA channel + * + * Some architectures may need to do allocate an interrupt + */ +extern int request_dma(dmach_t channel, const char * device_id); + +/* Free a DMA channel + * + * Some architectures may need to do free an interrupt + */ +extern void free_dma(dmach_t channel); + +/* Enable DMA for this channel + * + * On some architectures, this may have other side effects like + * enabling an interrupt and setting the DMA registers. + */ +extern void enable_dma(dmach_t channel); + +/* Disable DMA for this channel + * + * On some architectures, this may have other side effects like + * disabling an interrupt or whatever. + */ +extern void disable_dma(dmach_t channel); + +/* Test whether the specified channel has an active DMA transfer + */ +extern int dma_channel_active(dmach_t channel); + +/* Set the DMA scatter gather list for this channel + * + * This should not be called if a DMA channel is enabled, + * especially since some DMA architectures don't update the + * DMA address immediately, but defer it to the enable_dma(). + */ +extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg); + +/* Set the DMA address for this channel + * + * This should not be called if a DMA channel is enabled, + * especially since some DMA architectures don't update the + * DMA address immediately, but defer it to the enable_dma(). + */ +extern void __set_dma_addr(dmach_t channel, void *addr); +#define set_dma_addr(channel, addr) \ + __set_dma_addr(channel, bus_to_virt(addr)) + +/* Set the DMA byte count for this channel + * + * This should not be called if a DMA channel is enabled, + * especially since some DMA architectures don't update the + * DMA count immediately, but defer it to the enable_dma(). + */ +extern void set_dma_count(dmach_t channel, unsigned long count); + +/* Set the transfer direction for this channel + * + * This should not be called if a DMA channel is enabled, + * especially since some DMA architectures don't update the + * DMA transfer direction immediately, but defer it to the + * enable_dma(). + */ +extern void set_dma_mode(dmach_t channel, dmamode_t mode); + +/* Set the transfer speed for this channel + */ +extern void set_dma_speed(dmach_t channel, int cycle_ns); + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + */ +extern int get_dma_residue(dmach_t channel); + +#ifndef NO_DMA +#define NO_DMA 255 +#endif + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* _ARM_DMA_H */ diff --git a/include/asm-arm/domain.h b/arch/arm/include/asm/domain.h similarity index 98% rename from include/asm-arm/domain.h rename to arch/arm/include/asm/domain.h index 3c12a7625304d24d19bcb9e469c5b5bbcca8faef..cc7ef4080711ff5b2b506449dc54602d8fe65b8d 100644 --- a/include/asm-arm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/domain.h + * arch/arm/include/asm/domain.h * * Copyright (C) 1999 Russell King. * diff --git a/include/asm-arm/ecard.h b/arch/arm/include/asm/ecard.h similarity index 99% rename from include/asm-arm/ecard.h rename to arch/arm/include/asm/ecard.h index 5e22881a630da8a12a9a737cc86696cc204383fd..29f2610efc70775a7059f4b5f63e1cc175c78749 100644 --- a/include/asm-arm/ecard.h +++ b/arch/arm/include/asm/ecard.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/ecard.h + * arch/arm/include/asm/ecard.h * * definitions for expansion cards * diff --git a/include/asm-arm/elf.h b/arch/arm/include/asm/elf.h similarity index 100% rename from include/asm-arm/elf.h rename to arch/arm/include/asm/elf.h diff --git a/include/asm-arm/emergency-restart.h b/arch/arm/include/asm/emergency-restart.h similarity index 100% rename from include/asm-arm/emergency-restart.h rename to arch/arm/include/asm/emergency-restart.h diff --git a/include/asm-arm/errno.h b/arch/arm/include/asm/errno.h similarity index 100% rename from include/asm-arm/errno.h rename to arch/arm/include/asm/errno.h diff --git a/include/asm-arm/fb.h b/arch/arm/include/asm/fb.h similarity index 100% rename from include/asm-arm/fb.h rename to arch/arm/include/asm/fb.h diff --git a/include/asm-arm/fcntl.h b/arch/arm/include/asm/fcntl.h similarity index 100% rename from include/asm-arm/fcntl.h rename to arch/arm/include/asm/fcntl.h diff --git a/include/asm-arm/fiq.h b/arch/arm/include/asm/fiq.h similarity index 96% rename from include/asm-arm/fiq.h rename to arch/arm/include/asm/fiq.h index a3bad09e825caff503c8be058c76d878299bfe8f..2242ce22ec6c866285391f94696149e3977dece3 100644 --- a/include/asm-arm/fiq.h +++ b/arch/arm/include/asm/fiq.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/fiq.h + * arch/arm/include/asm/fiq.h * * Support for FIQ on ARM architectures. * Written by Philip Blundell , 1998 diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h new file mode 100644 index 0000000000000000000000000000000000000000..1d77e51907f6ddb70f5aa8123583827bffaa676c --- /dev/null +++ b/arch/arm/include/asm/flat.h @@ -0,0 +1,19 @@ +/* + * arch/arm/include/asm/flat.h -- uClinux flat-format executables + */ + +#ifndef __ARM_FLAT_H__ +#define __ARM_FLAT_H__ + +/* An odd number of words will be pushed after this alignment, so + deliberately misalign the value. */ +#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4) +#define flat_argvp_envp_on_stack() 1 +#define flat_old_ram_flag(flags) (flags) +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp) +#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) +#define flat_get_relocate_addr(rel) (rel) +#define flat_set_persistent(relval, p) 0 + +#endif /* __ARM_FLAT_H__ */ diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h new file mode 100644 index 0000000000000000000000000000000000000000..c9f03eccc9d86ce76c022d519b4ba66623aa3935 --- /dev/null +++ b/arch/arm/include/asm/floppy.h @@ -0,0 +1,148 @@ +/* + * arch/arm/include/asm/floppy.h + * + * Copyright (C) 1996-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here + */ +#ifndef __ASM_ARM_FLOPPY_H +#define __ASM_ARM_FLOPPY_H +#if 0 +#include +#endif + +#define fd_outb(val,port) \ + do { \ + if ((port) == FD_DOR) \ + fd_setdor((val)); \ + else \ + outb((val),(port)); \ + } while(0) + +#define fd_inb(port) inb((port)) +#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\ + IRQF_DISABLED,"floppy",NULL) +#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL) +#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK) +#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK) + +static inline int fd_dma_setup(void *data, unsigned int length, + unsigned int mode, unsigned long addr) +{ + set_dma_mode(DMA_FLOPPY, mode); + __set_dma_addr(DMA_FLOPPY, data); + set_dma_count(DMA_FLOPPY, length); + virtual_dma_port = addr; + enable_dma(DMA_FLOPPY); + return 0; +} +#define fd_dma_setup fd_dma_setup + +#define fd_request_dma() request_dma(DMA_FLOPPY,"floppy") +#define fd_free_dma() free_dma(DMA_FLOPPY) +#define fd_disable_dma() disable_dma(DMA_FLOPPY) + +/* need to clean up dma.h */ +#define DMA_FLOPPYDISK DMA_FLOPPY + +/* Floppy_selects is the list of DOR's to select drive fd + * + * On initialisation, the floppy list is scanned, and the drives allocated + * in the order that they are found. This is done by seeking the drive + * to a non-zero track, and then restoring it to track 0. If an error occurs, + * then there is no floppy drive present. [to be put back in again] + */ +static unsigned char floppy_selects[2][4] = +{ + { 0x10, 0x21, 0x23, 0x33 }, + { 0x10, 0x21, 0x23, 0x33 } +}; + +#define fd_setdor(dor) \ +do { \ + int new_dor = (dor); \ + if (new_dor & 0xf0) \ + new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \ + else \ + new_dor &= 0x0c; \ + outb(new_dor, FD_DOR); \ +} while (0) + +/* + * Someday, we'll automatically detect which drives are present... + */ +static inline void fd_scandrives (void) +{ +#if 0 + int floppy, drive_count; + + fd_disable_irq(); + raw_cmd = &default_raw_cmd; + raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK; + raw_cmd->track = 0; + raw_cmd->rate = ?; + drive_count = 0; + for (floppy = 0; floppy < 4; floppy ++) { + current_drive = drive_count; + /* + * Turn on floppy motor + */ + if (start_motor(redo_fd_request)) + continue; + /* + * Set up FDC + */ + fdc_specify(); + /* + * Tell FDC to recalibrate + */ + output_byte(FD_RECALIBRATE); + LAST_OUT(UNIT(floppy)); + /* wait for command to complete */ + if (!successful) { + int i; + for (i = drive_count; i < 3; i--) + floppy_selects[fdc][i] = floppy_selects[fdc][i + 1]; + floppy_selects[fdc][3] = 0; + floppy -= 1; + } else + drive_count++; + } +#else + floppy_selects[0][0] = 0x10; + floppy_selects[0][1] = 0x21; + floppy_selects[0][2] = 0x23; + floppy_selects[0][3] = 0x33; +#endif +} + +#define FDC1 (0x3f0) + +#define FLOPPY0_TYPE 4 +#define FLOPPY1_TYPE 4 + +#define N_FDC 1 +#define N_DRIVE 4 + +#define CROSS_64KB(a,s) (0) + +/* + * This allows people to reverse the order of + * fd0 and fd1, in case their hardware is + * strangely connected (as some RiscPCs + * and A5000s seem to be). + */ +static void driveswap(int *ints, int dummy, int dummy2) +{ + floppy_selects[0][0] ^= floppy_selects[0][1]; + floppy_selects[0][1] ^= floppy_selects[0][0]; + floppy_selects[0][0] ^= floppy_selects[0][1]; +} + +#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 } + +#endif diff --git a/include/asm-arm/fpstate.h b/arch/arm/include/asm/fpstate.h similarity index 97% rename from include/asm-arm/fpstate.h rename to arch/arm/include/asm/fpstate.h index 392eb53323238d16a6b9e80a8363960b06c1103e..ee5e03efc1bbe3dff88c2acc8313ab08136cd98b 100644 --- a/include/asm-arm/fpstate.h +++ b/arch/arm/include/asm/fpstate.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/fpstate.h + * arch/arm/include/asm/fpstate.h * * Copyright (C) 1995 Russell King * diff --git a/include/asm-arm/ftrace.h b/arch/arm/include/asm/ftrace.h similarity index 100% rename from include/asm-arm/ftrace.h rename to arch/arm/include/asm/ftrace.h diff --git a/include/asm-arm/futex.h b/arch/arm/include/asm/futex.h similarity index 100% rename from include/asm-arm/futex.h rename to arch/arm/include/asm/futex.h diff --git a/include/asm-arm/glue.h b/arch/arm/include/asm/glue.h similarity index 99% rename from include/asm-arm/glue.h rename to arch/arm/include/asm/glue.h index a97a182ba28732a4d9d22ae353efcf695696bd46..a0e39d5d00c936a68ac4f99ca9a9b6559b61854f 100644 --- a/include/asm-arm/glue.h +++ b/arch/arm/include/asm/glue.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/glue.h + * arch/arm/include/asm/glue.h * * Copyright (C) 1997-1999 Russell King * Copyright (C) 2000-2002 Deep Blue Solutions Ltd. diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h new file mode 100644 index 0000000000000000000000000000000000000000..166a7a3e28400db64062715a53bdb2f31d4e9df4 --- /dev/null +++ b/arch/arm/include/asm/gpio.h @@ -0,0 +1,7 @@ +#ifndef _ARCH_ARM_GPIO_H +#define _ARCH_ARM_GPIO_H + +/* not all ARM platforms necessarily support this API ... */ +#include + +#endif /* _ARCH_ARM_GPIO_H */ diff --git a/include/asm-arm/hardirq.h b/arch/arm/include/asm/hardirq.h similarity index 100% rename from include/asm-arm/hardirq.h rename to arch/arm/include/asm/hardirq.h diff --git a/include/asm-arm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h similarity index 100% rename from include/asm-arm/hardware/arm_timer.h rename to arch/arm/include/asm/hardware/arm_timer.h diff --git a/include/asm-arm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h similarity index 100% rename from include/asm-arm/hardware/arm_twd.h rename to arch/arm/include/asm/hardware/arm_twd.h diff --git a/include/asm-arm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h similarity index 97% rename from include/asm-arm/hardware/cache-l2x0.h rename to arch/arm/include/asm/hardware/cache-l2x0.h index 54029a740396de55f36cae0f826401bf6513e06d..64f2252a25cdc4fd5048ba28f9b9872267aebcdd 100644 --- a/include/asm-arm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/hardware/cache-l2x0.h + * arch/arm/include/asm/hardware/cache-l2x0.h * * Copyright (C) 2007 ARM Limited * diff --git a/include/asm-arm/hardware/clps7111.h b/arch/arm/include/asm/hardware/clps7111.h similarity index 99% rename from include/asm-arm/hardware/clps7111.h rename to arch/arm/include/asm/hardware/clps7111.h index 8d3228dc17784b7cd2c44a2158616c5b80c8e511..44477225aed60fdbc9f1ac56eba5853a3663ba7e 100644 --- a/include/asm-arm/hardware/clps7111.h +++ b/arch/arm/include/asm/hardware/clps7111.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/clps7111.h + * arch/arm/include/asm/hardware/clps7111.h * * This file contains the hardware definitions of the CLPS7111 internal * registers. diff --git a/include/asm-arm/hardware/cs89712.h b/arch/arm/include/asm/hardware/cs89712.h similarity index 97% rename from include/asm-arm/hardware/cs89712.h rename to arch/arm/include/asm/hardware/cs89712.h index ad99a3e1b80296a2c85a904ed082b26a7f0eb58b..f75626933e94d5801eaf8f2407ec6d8a17224158 100644 --- a/include/asm-arm/hardware/cs89712.h +++ b/arch/arm/include/asm/hardware/cs89712.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/cs89712.h + * arch/arm/include/asm/hardware/cs89712.h * * This file contains the hardware definitions of the CS89712 * additional internal registers. diff --git a/include/asm-arm/hardware/debug-8250.S b/arch/arm/include/asm/hardware/debug-8250.S similarity index 93% rename from include/asm-arm/hardware/debug-8250.S rename to arch/arm/include/asm/hardware/debug-8250.S index 07c97fb233fcd50d4963fe9e3b4f8201251dde16..22c689255e6e8767499c90b03732ce94d16efcbc 100644 --- a/include/asm-arm/hardware/debug-8250.S +++ b/arch/arm/include/asm/hardware/debug-8250.S @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/debug-8250.S + * arch/arm/include/asm/hardware/debug-8250.S * * Copyright (C) 1994-1999 Russell King * diff --git a/include/asm-arm/hardware/debug-pl01x.S b/arch/arm/include/asm/hardware/debug-pl01x.S similarity index 93% rename from include/asm-arm/hardware/debug-pl01x.S rename to arch/arm/include/asm/hardware/debug-pl01x.S index 23c541a9e89abc896098de362fee893d0eeb4297..f9fd083eff630dd29b0710d603c11447919b9d54 100644 --- a/include/asm-arm/hardware/debug-pl01x.S +++ b/arch/arm/include/asm/hardware/debug-pl01x.S @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/hardware/debug-pl01x.S +/* arch/arm/include/asm/hardware/debug-pl01x.S * * Debugging macro include header * diff --git a/include/asm-arm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h similarity index 98% rename from include/asm-arm/hardware/dec21285.h rename to arch/arm/include/asm/hardware/dec21285.h index 546f7077be9c42313dbae0798c59a8c8f50933a1..0d7552751aafc7d7abfdf1798ace6cc53db9131e 100644 --- a/include/asm-arm/hardware/dec21285.h +++ b/arch/arm/include/asm/hardware/dec21285.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/dec21285.h + * arch/arm/include/asm/hardware/dec21285.h * * Copyright (C) 1998 Russell King * @@ -19,7 +19,7 @@ #define DC21285_PCI_MEM 0x80000000 #ifndef __ASSEMBLY__ -#include +#include #define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) #else #define DC21285_IO(x) (x) diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S similarity index 99% rename from include/asm-arm/hardware/entry-macro-iomd.S rename to arch/arm/include/asm/hardware/entry-macro-iomd.S index 9bb580a5b15edddb745a69192e1be76c17c431a6..e0af4983723fbf99b2a4d8e93abe985c46b83b21 100644 --- a/include/asm-arm/hardware/entry-macro-iomd.S +++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S @@ -1,5 +1,5 @@ /* - * include/asm-arm/hardware/entry-macro-iomd.S + * arch/arm/include/asm/hardware/entry-macro-iomd.S * * Low-level IRQ helper macros for IOC/IOMD based platforms * diff --git a/include/asm-arm/hardware/ep7211.h b/arch/arm/include/asm/hardware/ep7211.h similarity index 96% rename from include/asm-arm/hardware/ep7211.h rename to arch/arm/include/asm/hardware/ep7211.h index 017aa68f612db33f5b4b18a126455560473739ff..654d5f625c49c4b938a6eede027869836c3e73ea 100644 --- a/include/asm-arm/hardware/ep7211.h +++ b/arch/arm/include/asm/hardware/ep7211.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/ep7211.h + * arch/arm/include/asm/hardware/ep7211.h * * This file contains the hardware definitions of the EP7211 internal * registers. diff --git a/include/asm-arm/hardware/ep7212.h b/arch/arm/include/asm/hardware/ep7212.h similarity index 98% rename from include/asm-arm/hardware/ep7212.h rename to arch/arm/include/asm/hardware/ep7212.h index 0e952e7470730eecf3370893b33182d751081aee..3b43bbeaf1db453523254aaa241c3250c5ad1dbe 100644 --- a/include/asm-arm/hardware/ep7212.h +++ b/arch/arm/include/asm/hardware/ep7212.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/ep7212.h + * arch/arm/include/asm/hardware/ep7212.h * * This file contains the hardware definitions of the EP7212 internal * registers. diff --git a/include/asm-arm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h similarity index 96% rename from include/asm-arm/hardware/gic.h rename to arch/arm/include/asm/hardware/gic.h index 966e428ad32c858aec9870a9cb72491effa7b3f3..4924914af1882afd80a31222cf858c1812d050fc 100644 --- a/include/asm-arm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/gic.h + * arch/arm/include/asm/hardware/gic.h * * Copyright (C) 2002 ARM Limited, All Rights Reserved. * diff --git a/include/asm-arm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h similarity index 96% rename from include/asm-arm/hardware/icst307.h rename to arch/arm/include/asm/hardware/icst307.h index ff8618a441c0c717f2467118fc05a2dd8246f586..554f128a104641aed7b4c2b747276c0f339173bf 100644 --- a/include/asm-arm/hardware/icst307.h +++ b/arch/arm/include/asm/hardware/icst307.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/icst307.h + * arch/arm/include/asm/hardware/icst307.h * * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. * diff --git a/include/asm-arm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h similarity index 96% rename from include/asm-arm/hardware/icst525.h rename to arch/arm/include/asm/hardware/icst525.h index edd5a5704406cc16bd11c8c0087d9dc8a04a6951..58f0dc43e2edb82bbed9a193bfe370db8f2a544a 100644 --- a/include/asm-arm/hardware/icst525.h +++ b/arch/arm/include/asm/hardware/icst525.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/icst525.h + * arch/arm/include/asm/hardware/icst525.h * * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. * diff --git a/include/asm-arm/hardware/ioc.h b/arch/arm/include/asm/hardware/ioc.h similarity index 97% rename from include/asm-arm/hardware/ioc.h rename to arch/arm/include/asm/hardware/ioc.h index b3b46ef659432e3b11e46c567398146ed5bf9bc6..1f6b8013becb4c58618790983d9a93f721112c9c 100644 --- a/include/asm-arm/hardware/ioc.h +++ b/arch/arm/include/asm/hardware/ioc.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/ioc.h + * arch/arm/include/asm/hardware/ioc.h * * Copyright (C) Russell King * diff --git a/include/asm-arm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h similarity index 99% rename from include/asm-arm/hardware/iomd.h rename to arch/arm/include/asm/hardware/iomd.h index 396e55ad06c6afe41fb754b548d257ca04c0c1a7..9c5afbd71a69a4bbdaf6e8d8c806e07f3f199db1 100644 --- a/include/asm-arm/hardware/iomd.h +++ b/arch/arm/include/asm/hardware/iomd.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/iomd.h + * arch/arm/include/asm/hardware/iomd.h * * Copyright (C) 1999 Russell King * diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h similarity index 99% rename from include/asm-arm/hardware/iop3xx-adma.h rename to arch/arm/include/asm/hardware/iop3xx-adma.h index a32b86ac62aa4f4e325dd7c035270a88b072c392..87bff09633aac50bdcffcdc0aae2891000cda161 100644 --- a/include/asm-arm/hardware/iop3xx-adma.h +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -19,7 +19,7 @@ #define _ADMA_H #include #include -#include +#include #include /* Memory copy units */ @@ -260,7 +260,7 @@ static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op) static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt, int *slots_per_op) { - static const int slot_count_table[] = { 0, + static const char slot_count_table[] = { 1, 1, 1, 1, /* 01 - 04 */ 2, 2, 2, 2, /* 05 - 08 */ 4, 4, 4, 4, /* 09 - 12 */ @@ -270,7 +270,7 @@ static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt, 8, 8, 8, 8, /* 25 - 28 */ 8, 8, 8, 8, /* 29 - 32 */ }; - *slots_per_op = slot_count_table[src_cnt]; + *slots_per_op = slot_count_table[src_cnt - 1]; return *slots_per_op; } diff --git a/include/asm-arm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h similarity index 95% rename from include/asm-arm/hardware/iop3xx-gpio.h rename to arch/arm/include/asm/hardware/iop3xx-gpio.h index 0c9331f9ac2464b5560cb024efa3e09a8198b0c8..b69d972b1f7d21987c2ca86c7119cb101767f75d 100644 --- a/include/asm-arm/hardware/iop3xx-gpio.h +++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/iop3xx-gpio.h + * arch/arm/include/asm/hardware/iop3xx-gpio.h * * IOP3xx GPIO wrappers * @@ -25,7 +25,7 @@ #ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H #define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H -#include +#include #include #define IOP3XX_N_GPIOS 8 diff --git a/include/asm-arm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h similarity index 99% rename from include/asm-arm/hardware/iop3xx.h rename to arch/arm/include/asm/hardware/iop3xx.h index 18f6937f50103d1ec60d04412c67613b2b739eae..4b8e7f559929970b739af0f080b67a6c16247602 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/hardware/iop3xx.h + * arch/arm/include/asm/hardware/iop3xx.h * * Intel IOP32X and IOP33X register definitions * diff --git a/include/asm-arm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h similarity index 100% rename from include/asm-arm/hardware/iop_adma.h rename to arch/arm/include/asm/hardware/iop_adma.h diff --git a/include/asm-arm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h similarity index 100% rename from include/asm-arm/hardware/it8152.h rename to arch/arm/include/asm/hardware/it8152.h diff --git a/include/asm-arm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h similarity index 100% rename from include/asm-arm/hardware/linkup-l1110.h rename to arch/arm/include/asm/hardware/linkup-l1110.h diff --git a/include/asm-arm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h similarity index 99% rename from include/asm-arm/hardware/locomo.h rename to arch/arm/include/asm/hardware/locomo.h index fb0645de6f3158b72c6685514ac181240de8230e..954b1be991b4a19a9e7001c2996b4821cf50752b 100644 --- a/include/asm-arm/hardware/locomo.h +++ b/arch/arm/include/asm/hardware/locomo.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/locomo.h + * arch/arm/include/asm/hardware/locomo.h * * This file contains the definitions for the LoCoMo G/A Chip * diff --git a/include/asm-arm/hardware/memc.h b/arch/arm/include/asm/hardware/memc.h similarity index 93% rename from include/asm-arm/hardware/memc.h rename to arch/arm/include/asm/hardware/memc.h index 8aef5aa0e01bddb81f715ab92d584d9494f92b28..42ba7c167d1fb62bfcb7f778e406d97f12b536cc 100644 --- a/include/asm-arm/hardware/memc.h +++ b/arch/arm/include/asm/hardware/memc.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/memc.h + * arch/arm/include/asm/hardware/memc.h * * Copyright (C) Russell King. * diff --git a/include/asm-arm/hardware/pci_v3.h b/arch/arm/include/asm/hardware/pci_v3.h similarity index 99% rename from include/asm-arm/hardware/pci_v3.h rename to arch/arm/include/asm/hardware/pci_v3.h index 4d497bdb9a9796b6efb6a7fa50bca889374fcff0..2811c7e2cfdf1c67ea172031ecb8b21d148203ad 100644 --- a/include/asm-arm/hardware/pci_v3.h +++ b/arch/arm/include/asm/hardware/pci_v3.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/pci_v3.h + * arch/arm/include/asm/hardware/pci_v3.h * * Internal header file PCI V3 chip * diff --git a/include/asm-arm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h similarity index 99% rename from include/asm-arm/hardware/sa1111.h rename to arch/arm/include/asm/hardware/sa1111.h index 61b1d05c7df74772f95cd581cd06c05ee81cbdf8..5da2595759e52c925873dbfe8fc2615f5a09e306 100644 --- a/include/asm-arm/hardware/sa1111.h +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/sa1111.h + * arch/arm/include/asm/hardware/sa1111.h * * Copyright (C) 2000 John G Dorsey * @@ -12,7 +12,7 @@ #ifndef _ASM_ARCH_SA1111 #define _ASM_ARCH_SA1111 -#include +#include /* * The SA1111 is always located at virtual 0xf4000000, and is always diff --git a/include/asm-arm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h similarity index 100% rename from include/asm-arm/hardware/scoop.h rename to arch/arm/include/asm/hardware/scoop.h diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/arch/arm/include/asm/hardware/sharpsl_pm.h similarity index 100% rename from include/asm-arm/hardware/sharpsl_pm.h rename to arch/arm/include/asm/hardware/sharpsl_pm.h diff --git a/include/asm-arm/hardware/ssp.h b/arch/arm/include/asm/hardware/ssp.h similarity index 100% rename from include/asm-arm/hardware/ssp.h rename to arch/arm/include/asm/hardware/ssp.h diff --git a/include/asm-arm/hardware/uengine.h b/arch/arm/include/asm/hardware/uengine.h similarity index 100% rename from include/asm-arm/hardware/uengine.h rename to arch/arm/include/asm/hardware/uengine.h diff --git a/include/asm-arm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h similarity index 97% rename from include/asm-arm/hardware/vic.h rename to arch/arm/include/asm/hardware/vic.h index ed9ca3736a0be3c02630a29f5f00490731402907..263f2c362a306166e92812963b42c10992d79fb1 100644 --- a/include/asm-arm/hardware/vic.h +++ b/arch/arm/include/asm/hardware/vic.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/vic.h + * arch/arm/include/asm/hardware/vic.h * * Copyright (c) ARM Limited 2003. All rights reserved. * diff --git a/arch/arm/include/asm/hw_irq.h b/arch/arm/include/asm/hw_irq.h new file mode 100644 index 0000000000000000000000000000000000000000..90831f6f5f5cb9b033097f895cfb5edc5dc8b7b6 --- /dev/null +++ b/arch/arm/include/asm/hw_irq.h @@ -0,0 +1,27 @@ +/* + * Nothing to see here yet + */ +#ifndef _ARCH_ARM_HW_IRQ_H +#define _ARCH_ARM_HW_IRQ_H + +static inline void ack_bad_irq(int irq) +{ + extern unsigned long irq_err_count; + irq_err_count++; +} + +/* + * Obsolete inline function for calling irq descriptor handlers. + */ +static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc) +{ + desc->handle_irq(irq, desc); +} + +void set_irq_flags(unsigned int irq, unsigned int flags); + +#define IRQF_VALID (1 << 0) +#define IRQF_PROBE (1 << 1) +#define IRQF_NOAUTOEN (1 << 2) + +#endif diff --git a/include/asm-arm/hwcap.h b/arch/arm/include/asm/hwcap.h similarity index 100% rename from include/asm-arm/hwcap.h rename to arch/arm/include/asm/hwcap.h diff --git a/arch/arm/include/asm/ide.h b/arch/arm/include/asm/ide.h new file mode 100644 index 0000000000000000000000000000000000000000..b507ce8e5019af2b879f0a38005d71f235898b9f --- /dev/null +++ b/arch/arm/include/asm/ide.h @@ -0,0 +1,23 @@ +/* + * arch/arm/include/asm/ide.h + * + * Copyright (C) 1994-1996 Linus Torvalds & authors + */ + +/* + * This file contains the ARM architecture specific IDE code. + */ + +#ifndef __ASMARM_IDE_H +#define __ASMARM_IDE_H + +#ifdef __KERNEL__ + +#define __ide_mm_insw(port,addr,len) readsw(port,addr,len) +#define __ide_mm_insl(port,addr,len) readsl(port,addr,len) +#define __ide_mm_outsw(port,addr,len) writesw(port,addr,len) +#define __ide_mm_outsl(port,addr,len) writesl(port,addr,len) + +#endif /* __KERNEL__ */ + +#endif /* __ASMARM_IDE_H */ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h new file mode 100644 index 0000000000000000000000000000000000000000..94a95d7fafd6cdaf887e26dcfad35dbe6590c39a --- /dev/null +++ b/arch/arm/include/asm/io.h @@ -0,0 +1,287 @@ +/* + * arch/arm/include/asm/io.h + * + * Copyright (C) 1996-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both + * constant addresses and variable addresses. + * 04-Dec-1997 RMK Moved a lot of this stuff to the new architecture + * specific IO header files. + * 27-Mar-1999 PJB Second parameter of memcpy_toio is const.. + * 04-Apr-1999 PJB Added check_signature. + * 12-Dec-1999 RMK More cleanups + * 18-Jun-2000 RMK Removed virt_to_* and friends definitions + * 05-Oct-2004 BJD Moved memory string functions to use void __iomem + */ +#ifndef __ASM_ARM_IO_H +#define __ASM_ARM_IO_H + +#ifdef __KERNEL__ + +#include +#include +#include + +/* + * ISA I/O bus memory addresses are 1:1 with the physical address. + */ +#define isa_virt_to_bus virt_to_phys +#define isa_page_to_bus page_to_phys +#define isa_bus_to_virt phys_to_virt + +/* + * Generic IO read/write. These perform native-endian accesses. Note + * that some architectures will want to re-define __raw_{read,write}w. + */ +extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen); +extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen); +extern void __raw_writesl(void __iomem *addr, const void *data, int longlen); + +extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen); +extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); +extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); + +#define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile unsigned char __force *)(a) = (v)) +#define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v)) +#define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a) = (v)) + +#define __raw_readb(a) (__chk_io_ptr(a), *(volatile unsigned char __force *)(a)) +#define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) +#define __raw_readl(a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a)) + +/* + * Architecture ioremap implementation. + */ +#define MT_DEVICE 0 +#define MT_DEVICE_NONSHARED 1 +#define MT_DEVICE_CACHED 2 +#define MT_DEVICE_IXP2000 3 +/* + * types 4 onwards can be found in asm/mach/map.h and are undefined + * for ioremap + */ + +/* + * __arm_ioremap takes CPU physical address. + * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page + */ +extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int); +extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int); +extern void __iounmap(volatile void __iomem *addr); + +/* + * Bad read/write accesses... + */ +extern void __readwrite_bug(const char *fn); + +/* + * Now, pick up the machine-defined IO definitions + */ +#include + +/* + * IO port access primitives + * ------------------------- + * + * The ARM doesn't have special IO access instructions; all IO is memory + * mapped. Note that these are defined to perform little endian accesses + * only. Their primary purpose is to access PCI and ISA peripherals. + * + * Note that for a big endian machine, this implies that the following + * big endian mode connectivity is in place, as described by numerous + * ARM documents: + * + * PCI: D0-D7 D8-D15 D16-D23 D24-D31 + * ARM: D24-D31 D16-D23 D8-D15 D0-D7 + * + * The machine specific io.h include defines __io to translate an "IO" + * address to a memory address. + * + * Note that we prevent GCC re-ordering or caching values in expressions + * by introducing sequence points into the in*() definitions. Note that + * __raw_* do not guarantee this behaviour. + * + * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. + */ +#ifdef __io +#define outb(v,p) __raw_writeb(v,__io(p)) +#define outw(v,p) __raw_writew((__force __u16) \ + cpu_to_le16(v),__io(p)) +#define outl(v,p) __raw_writel((__force __u32) \ + cpu_to_le32(v),__io(p)) + +#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __v; }) +#define inw(p) ({ __u16 __v = le16_to_cpu((__force __le16) \ + __raw_readw(__io(p))); __v; }) +#define inl(p) ({ __u32 __v = le32_to_cpu((__force __le32) \ + __raw_readl(__io(p))); __v; }) + +#define outsb(p,d,l) __raw_writesb(__io(p),d,l) +#define outsw(p,d,l) __raw_writesw(__io(p),d,l) +#define outsl(p,d,l) __raw_writesl(__io(p),d,l) + +#define insb(p,d,l) __raw_readsb(__io(p),d,l) +#define insw(p,d,l) __raw_readsw(__io(p),d,l) +#define insl(p,d,l) __raw_readsl(__io(p),d,l) +#endif + +#define outb_p(val,port) outb((val),(port)) +#define outw_p(val,port) outw((val),(port)) +#define outl_p(val,port) outl((val),(port)) +#define inb_p(port) inb((port)) +#define inw_p(port) inw((port)) +#define inl_p(port) inl((port)) + +#define outsb_p(port,from,len) outsb(port,from,len) +#define outsw_p(port,from,len) outsw(port,from,len) +#define outsl_p(port,from,len) outsl(port,from,len) +#define insb_p(port,to,len) insb(port,to,len) +#define insw_p(port,to,len) insw(port,to,len) +#define insl_p(port,to,len) insl(port,to,len) + +/* + * String version of IO memory access ops: + */ +extern void _memcpy_fromio(void *, const volatile void __iomem *, size_t); +extern void _memcpy_toio(volatile void __iomem *, const void *, size_t); +extern void _memset_io(volatile void __iomem *, int, size_t); + +#define mmiowb() + +/* + * Memory access primitives + * ------------------------ + * + * These perform PCI memory accesses via an ioremap region. They don't + * take an address as such, but a cookie. + * + * Again, this are defined to perform little endian accesses. See the + * IO port primitives for more information. + */ +#ifdef __mem_pci +#define readb(c) ({ __u8 __v = __raw_readb(__mem_pci(c)); __v; }) +#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \ + __raw_readw(__mem_pci(c))); __v; }) +#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \ + __raw_readl(__mem_pci(c))); __v; }) +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) + +#define readsb(p,d,l) __raw_readsb(__mem_pci(p),d,l) +#define readsw(p,d,l) __raw_readsw(__mem_pci(p),d,l) +#define readsl(p,d,l) __raw_readsl(__mem_pci(p),d,l) + +#define writeb(v,c) __raw_writeb(v,__mem_pci(c)) +#define writew(v,c) __raw_writew((__force __u16) \ + cpu_to_le16(v),__mem_pci(c)) +#define writel(v,c) __raw_writel((__force __u32) \ + cpu_to_le32(v),__mem_pci(c)) + +#define writesb(p,d,l) __raw_writesb(__mem_pci(p),d,l) +#define writesw(p,d,l) __raw_writesw(__mem_pci(p),d,l) +#define writesl(p,d,l) __raw_writesl(__mem_pci(p),d,l) + +#define memset_io(c,v,l) _memset_io(__mem_pci(c),(v),(l)) +#define memcpy_fromio(a,c,l) _memcpy_fromio((a),__mem_pci(c),(l)) +#define memcpy_toio(c,a,l) _memcpy_toio(__mem_pci(c),(a),(l)) + +#elif !defined(readb) + +#define readb(c) (__readwrite_bug("readb"),0) +#define readw(c) (__readwrite_bug("readw"),0) +#define readl(c) (__readwrite_bug("readl"),0) +#define writeb(v,c) __readwrite_bug("writeb") +#define writew(v,c) __readwrite_bug("writew") +#define writel(v,c) __readwrite_bug("writel") + +#define check_signature(io,sig,len) (0) + +#endif /* __mem_pci */ + +/* + * ioremap and friends. + * + * ioremap takes a PCI memory address, as specified in + * Documentation/IO-mapping.txt. + * + */ +#ifndef __arch_ioremap +#define ioremap(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) +#define ioremap_nocache(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) +#define ioremap_cached(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_CACHED) +#define iounmap(cookie) __iounmap(cookie) +#else +#define ioremap(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) +#define ioremap_nocache(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) +#define ioremap_cached(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_CACHED) +#define iounmap(cookie) __arch_iounmap(cookie) +#endif + +/* + * io{read,write}{8,16,32} macros + */ +#ifndef ioread8 +#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; }) +#define ioread16(p) ({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; }) +#define ioread32(p) ({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; }) + +#define iowrite8(v,p) __raw_writeb(v, p) +#define iowrite16(v,p) __raw_writew((__force __u16)cpu_to_le16(v), p) +#define iowrite32(v,p) __raw_writel((__force __u32)cpu_to_le32(v), p) + +#define ioread8_rep(p,d,c) __raw_readsb(p,d,c) +#define ioread16_rep(p,d,c) __raw_readsw(p,d,c) +#define ioread32_rep(p,d,c) __raw_readsl(p,d,c) + +#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c) +#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c) +#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c) + +extern void __iomem *ioport_map(unsigned long port, unsigned int nr); +extern void ioport_unmap(void __iomem *addr); +#endif + +struct pci_dev; + +extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen); +extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); + +/* + * can the hardware map this into one segment or not, given no other + * constraints. + */ +#define BIOVEC_MERGEABLE(vec1, vec2) \ + ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) + +#ifdef CONFIG_MMU +#define ARCH_HAS_VALID_PHYS_ADDR_RANGE +extern int valid_phys_addr_range(unsigned long addr, size_t size); +extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); +#endif + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +/* + * Register ISA memory and port locations for glibc iopl/inb/outb + * emulation. + */ +extern void register_isa_ports(unsigned int mmio, unsigned int io, + unsigned int io_shift); + +#endif /* __KERNEL__ */ +#endif /* __ASM_ARM_IO_H */ diff --git a/include/asm-arm/ioctl.h b/arch/arm/include/asm/ioctl.h similarity index 100% rename from include/asm-arm/ioctl.h rename to arch/arm/include/asm/ioctl.h diff --git a/include/asm-arm/ioctls.h b/arch/arm/include/asm/ioctls.h similarity index 100% rename from include/asm-arm/ioctls.h rename to arch/arm/include/asm/ioctls.h diff --git a/include/asm-arm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h similarity index 100% rename from include/asm-arm/ipcbuf.h rename to arch/arm/include/asm/ipcbuf.h diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h new file mode 100644 index 0000000000000000000000000000000000000000..d6786090d02caf5e4d7f0ab8b2c59121d86d46b7 --- /dev/null +++ b/arch/arm/include/asm/irq.h @@ -0,0 +1,28 @@ +#ifndef __ASM_ARM_IRQ_H +#define __ASM_ARM_IRQ_H + +#include + +#ifndef irq_canonicalize +#define irq_canonicalize(i) (i) +#endif + +#ifndef NR_IRQS +#define NR_IRQS 128 +#endif + +/* + * Use this value to indicate lack of interrupt + * capability + */ +#ifndef NO_IRQ +#define NO_IRQ ((unsigned int)(-1)) +#endif + +#ifndef __ASSEMBLY__ +struct irqaction; +extern void migrate_irqs(void); +#endif + +#endif + diff --git a/include/asm-arm/irq_regs.h b/arch/arm/include/asm/irq_regs.h similarity index 100% rename from include/asm-arm/irq_regs.h rename to arch/arm/include/asm/irq_regs.h diff --git a/include/asm-arm/irqflags.h b/arch/arm/include/asm/irqflags.h similarity index 100% rename from include/asm-arm/irqflags.h rename to arch/arm/include/asm/irqflags.h diff --git a/include/asm-arm/kdebug.h b/arch/arm/include/asm/kdebug.h similarity index 100% rename from include/asm-arm/kdebug.h rename to arch/arm/include/asm/kdebug.h diff --git a/include/asm-arm/kexec.h b/arch/arm/include/asm/kexec.h similarity index 100% rename from include/asm-arm/kexec.h rename to arch/arm/include/asm/kexec.h diff --git a/arch/arm/include/asm/kgdb.h b/arch/arm/include/asm/kgdb.h new file mode 100644 index 0000000000000000000000000000000000000000..67af4b841984e44cab60be11686c423fe58a76f9 --- /dev/null +++ b/arch/arm/include/asm/kgdb.h @@ -0,0 +1,104 @@ +/* + * ARM KGDB support + * + * Author: Deepak Saxena + * + * Copyright (C) 2002 MontaVista Software Inc. + * + */ + +#ifndef __ARM_KGDB_H__ +#define __ARM_KGDB_H__ + +#include + +/* + * GDB assumes that we're a user process being debugged, so + * it will send us an SWI command to write into memory as the + * debug trap. When an SWI occurs, the next instruction addr is + * placed into R14_svc before jumping to the vector trap. + * This doesn't work for kernel debugging as we are already in SVC + * we would loose the kernel's LR, which is a bad thing. This + * is bad thing. + * + * By doing this as an undefined instruction trap, we force a mode + * switch from SVC to UND mode, allowing us to save full kernel state. + * + * We also define a KGDB_COMPILED_BREAK which can be used to compile + * in breakpoints. This is important for things like sysrq-G and for + * the initial breakpoint from trap_init(). + * + * Note to ARM HW designers: Add real trap support like SH && PPC to + * make our lives much much simpler. :) + */ +#define BREAK_INSTR_SIZE 4 +#define GDB_BREAKINST 0xef9f0001 +#define KGDB_BREAKINST 0xe7ffdefe +#define KGDB_COMPILED_BREAK 0xe7ffdeff +#define CACHE_FLUSH_IS_SAFE 1 + +#ifndef __ASSEMBLY__ + +static inline void arch_kgdb_breakpoint(void) +{ + asm(".word 0xe7ffdeff"); +} + +extern void kgdb_handle_bus_error(void); +extern int kgdb_fault_expected; + +#endif /* !__ASSEMBLY__ */ + +/* + * From Kevin Hilman: + * + * gdb is expecting the following registers layout. + * + * r0-r15: 1 long word each + * f0-f7: unused, 3 long words each !! + * fps: unused, 1 long word + * cpsr: 1 long word + * + * Even though f0-f7 and fps are not used, they need to be + * present in the registers sent for correct processing in + * the host-side gdb. + * + * In particular, it is crucial that CPSR is in the right place, + * otherwise gdb will not be able to correctly interpret stepping over + * conditional branches. + */ +#define _GP_REGS 16 +#define _FP_REGS 8 +#define _EXTRA_REGS 2 +#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS) + +#define KGDB_MAX_NO_CPUS 1 +#define BUFMAX 400 +#define NUMREGBYTES (GDB_MAX_REGS << 2) +#define NUMCRITREGBYTES (32 << 2) + +#define _R0 0 +#define _R1 1 +#define _R2 2 +#define _R3 3 +#define _R4 4 +#define _R5 5 +#define _R6 6 +#define _R7 7 +#define _R8 8 +#define _R9 9 +#define _R10 10 +#define _FP 11 +#define _IP 12 +#define _SPT 13 +#define _LR 14 +#define _PC 15 +#define _CPSR (GDB_MAX_REGS - 1) + +/* + * So that we can denote the end of a frame for tracing, + * in the simple case: + */ +#define CFI_END_FRAME(func) __CFI_END_FRAME(_PC, _SPT, func) + +#endif /* __ASM_KGDB_H__ */ diff --git a/include/asm-arm/kmap_types.h b/arch/arm/include/asm/kmap_types.h similarity index 100% rename from include/asm-arm/kmap_types.h rename to arch/arm/include/asm/kmap_types.h diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h new file mode 100644 index 0000000000000000000000000000000000000000..a5d0d99ad38705b42e24735e5835de9c33663746 --- /dev/null +++ b/arch/arm/include/asm/kprobes.h @@ -0,0 +1,79 @@ +/* + * arch/arm/include/asm/kprobes.h + * + * Copyright (C) 2006, 2007 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef _ARM_KPROBES_H +#define _ARM_KPROBES_H + +#include +#include +#include + +#define __ARCH_WANT_KPROBES_INSN_SLOT +#define MAX_INSN_SIZE 2 +#define MAX_STACK_SIZE 64 /* 32 would probably be OK */ + +/* + * This undefined instruction must be unique and + * reserved solely for kprobes' use. + */ +#define KPROBE_BREAKPOINT_INSTRUCTION 0xe7f001f8 + +#define regs_return_value(regs) ((regs)->ARM_r0) +#define flush_insn_slot(p) do { } while (0) +#define kretprobe_blacklist_size 0 + +typedef u32 kprobe_opcode_t; + +struct kprobe; +typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *); + +/* Architecture specific copy of original instruction. */ +struct arch_specific_insn { + kprobe_opcode_t *insn; + kprobe_insn_handler_t *insn_handler; +}; + +struct prev_kprobe { + struct kprobe *kp; + unsigned int status; +}; + +/* per-cpu kprobe control block */ +struct kprobe_ctlblk { + unsigned int kprobe_status; + struct prev_kprobe prev_kprobe; + struct pt_regs jprobe_saved_regs; + char jprobes_stack[MAX_STACK_SIZE]; +}; + +void arch_remove_kprobe(struct kprobe *); +void kretprobe_trampoline(void); + +int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr); +int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr); +int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); + +enum kprobe_insn { + INSN_REJECTED, + INSN_GOOD, + INSN_GOOD_NO_SLOT +}; + +enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t, + struct arch_specific_insn *); +void __init arm_kprobe_decode_init(void); + +#endif /* _ARM_KPROBES_H */ diff --git a/include/asm-arm/leds.h b/arch/arm/include/asm/leds.h similarity index 96% rename from include/asm-arm/leds.h rename to arch/arm/include/asm/leds.h index 12290ea55801c101341e0707c233bf9fb4e082ab..c545739f39b7e5761b7611431fd9db55183a5841 100644 --- a/include/asm-arm/leds.h +++ b/arch/arm/include/asm/leds.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/leds.h + * arch/arm/include/asm/leds.h * * Copyright (C) 1998 Russell King * diff --git a/include/asm-arm/limits.h b/arch/arm/include/asm/limits.h similarity index 100% rename from include/asm-arm/limits.h rename to arch/arm/include/asm/limits.h diff --git a/include/asm-arm/linkage.h b/arch/arm/include/asm/linkage.h similarity index 100% rename from include/asm-arm/linkage.h rename to arch/arm/include/asm/linkage.h diff --git a/include/asm-arm/local.h b/arch/arm/include/asm/local.h similarity index 100% rename from include/asm-arm/local.h rename to arch/arm/include/asm/local.h diff --git a/include/asm-arm/locks.h b/arch/arm/include/asm/locks.h similarity index 99% rename from include/asm-arm/locks.h rename to arch/arm/include/asm/locks.h index 852220eecdbc5d3147528bd6853f2a039ae91543..ef4c897772d1459f589ac2a1967a742e822cad2a 100644 --- a/include/asm-arm/locks.h +++ b/arch/arm/include/asm/locks.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/locks.h + * arch/arm/include/asm/locks.h * * Copyright (C) 2000 Russell King * diff --git a/include/asm-arm/mach/arch.h b/arch/arm/include/asm/mach/arch.h similarity index 97% rename from include/asm-arm/mach/arch.h rename to arch/arm/include/asm/mach/arch.h index bcc8aed7c9a9a994baff55d06d3c639105b31978..c59842dc7cb8d8f2b3a3e140d3a17d8da575efe0 100644 --- a/include/asm-arm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/arch.h + * arch/arm/include/asm/mach/arch.h * * Copyright (C) 2000 Russell King * diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h new file mode 100644 index 0000000000000000000000000000000000000000..fc7278ea7146798d50c0dfb219bae5db025fefab --- /dev/null +++ b/arch/arm/include/asm/mach/dma.h @@ -0,0 +1,57 @@ +/* + * arch/arm/include/asm/mach/dma.h + * + * Copyright (C) 1998-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This header file describes the interface between the generic DMA handler + * (dma.c) and the architecture-specific DMA backends (dma-*.c) + */ + +struct dma_struct; +typedef struct dma_struct dma_t; + +struct dma_ops { + int (*request)(dmach_t, dma_t *); /* optional */ + void (*free)(dmach_t, dma_t *); /* optional */ + void (*enable)(dmach_t, dma_t *); /* mandatory */ + void (*disable)(dmach_t, dma_t *); /* mandatory */ + int (*residue)(dmach_t, dma_t *); /* optional */ + int (*setspeed)(dmach_t, dma_t *, int); /* optional */ + char *type; +}; + +struct dma_struct { + void *addr; /* single DMA address */ + unsigned long count; /* single DMA size */ + struct scatterlist buf; /* single DMA */ + int sgcount; /* number of DMA SG */ + struct scatterlist *sg; /* DMA Scatter-Gather List */ + + unsigned int active:1; /* Transfer active */ + unsigned int invalid:1; /* Address/Count changed */ + + dmamode_t dma_mode; /* DMA mode */ + int speed; /* DMA speed */ + + unsigned int lock; /* Device is allocated */ + const char *device_id; /* Device name */ + + unsigned int dma_base; /* Controller base address */ + int dma_irq; /* Controller IRQ */ + struct scatterlist cur_sg; /* Current controller buffer */ + unsigned int state; + + struct dma_ops *d_ops; +}; + +/* Prototype: void arch_dma_init(dma) + * Purpose : Initialise architecture specific DMA + * Params : dma - pointer to array of DMA structures + */ +extern void arch_dma_init(dma_t *dma); + +extern void isa_init_dma(dma_t *dma); diff --git a/include/asm-arm/mach/flash.h b/arch/arm/include/asm/mach/flash.h similarity index 96% rename from include/asm-arm/mach/flash.h rename to arch/arm/include/asm/mach/flash.h index 05b029ef6371c6203b1471897490bebce8920815..4ca69fe2c850c0a995574ffe250444d8062d8d95 100644 --- a/include/asm-arm/mach/flash.h +++ b/arch/arm/include/asm/mach/flash.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/flash.h + * arch/arm/include/asm/mach/flash.h * * Copyright (C) 2003 Russell King, All Rights Reserved. * diff --git a/arch/arm/include/asm/mach/irda.h b/arch/arm/include/asm/mach/irda.h new file mode 100644 index 0000000000000000000000000000000000000000..38f77b5e56cfc6dae2d4dbb92f87f66805cfb0c2 --- /dev/null +++ b/arch/arm/include/asm/mach/irda.h @@ -0,0 +1,20 @@ +/* + * arch/arm/include/asm/mach/irda.h + * + * Copyright (C) 2004 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_MACH_IRDA_H +#define __ASM_ARM_MACH_IRDA_H + +struct irda_platform_data { + int (*startup)(struct device *); + void (*shutdown)(struct device *); + int (*set_power)(struct device *, unsigned int state); + void (*set_speed)(struct device *, unsigned int speed); +}; + +#endif diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h new file mode 100644 index 0000000000000000000000000000000000000000..acac5302e4eaf1860e2db8d77d2b47ee0f4cf399 --- /dev/null +++ b/arch/arm/include/asm/mach/irq.h @@ -0,0 +1,34 @@ +/* + * arch/arm/include/asm/mach/irq.h + * + * Copyright (C) 1995-2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_MACH_IRQ_H +#define __ASM_ARM_MACH_IRQ_H + +#include + +struct seq_file; + +/* + * This is internal. Do not use it. + */ +extern void (*init_arch_irq)(void); +extern void init_FIQ(void); +extern int show_fiq_list(struct seq_file *, void *); + +/* + * This is for easy migration, but should be changed in the source + */ +#define do_bad_IRQ(irq,desc) \ +do { \ + spin_lock(&desc->lock); \ + handle_bad_irq(irq, desc); \ + spin_unlock(&desc->lock); \ +} while(0) + +#endif diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h new file mode 100644 index 0000000000000000000000000000000000000000..06f583b13999c220ba835658c657460ccb1a5783 --- /dev/null +++ b/arch/arm/include/asm/mach/map.h @@ -0,0 +1,36 @@ +/* + * arch/arm/include/asm/map.h + * + * Copyright (C) 1999-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Page table mapping constructs and function prototypes + */ +#include + +struct map_desc { + unsigned long virtual; + unsigned long pfn; + unsigned long length; + unsigned int type; +}; + +/* types 0-3 are defined in asm/io.h */ +#define MT_CACHECLEAN 4 +#define MT_MINICLEAN 5 +#define MT_LOW_VECTORS 6 +#define MT_HIGH_VECTORS 7 +#define MT_MEMORY 8 +#define MT_ROM 9 + +#define MT_NONSHARED_DEVICE MT_DEVICE_NONSHARED +#define MT_IXP2000_DEVICE MT_DEVICE_IXP2000 + +#ifdef CONFIG_MMU +extern void iotable_init(struct map_desc *, int); +#else +#define iotable_init(map,num) do { } while (0) +#endif diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h new file mode 100644 index 0000000000000000000000000000000000000000..4da332b03144c4d27bf07876506f2c94f72adb0b --- /dev/null +++ b/arch/arm/include/asm/mach/mmc.h @@ -0,0 +1,15 @@ +/* + * arch/arm/include/asm/mach/mmc.h + */ +#ifndef ASMARM_MACH_MMC_H +#define ASMARM_MACH_MMC_H + +#include + +struct mmc_platform_data { + unsigned int ocr_mask; /* available voltages */ + u32 (*translate_vdd)(struct device *, unsigned int); + unsigned int (*status)(struct device *); +}; + +#endif diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h new file mode 100644 index 0000000000000000000000000000000000000000..32da1ae17e066f94bc65c6368ddcdb9dc83b6ef7 --- /dev/null +++ b/arch/arm/include/asm/mach/pci.h @@ -0,0 +1,72 @@ +/* + * arch/arm/include/asm/mach/pci.h + * + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +struct pci_sys_data; +struct pci_bus; + +struct hw_pci { + struct list_head buses; + int nr_controllers; + int (*setup)(int nr, struct pci_sys_data *); + struct pci_bus *(*scan)(int nr, struct pci_sys_data *); + void (*preinit)(void); + void (*postinit)(void); + u8 (*swizzle)(struct pci_dev *dev, u8 *pin); + int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin); +}; + +/* + * Per-controller structure + */ +struct pci_sys_data { + struct list_head node; + int busnr; /* primary bus number */ + u64 mem_offset; /* bus->cpu memory mapping offset */ + unsigned long io_offset; /* bus->cpu IO mapping offset */ + struct pci_bus *bus; /* PCI bus */ + struct resource *resource[3]; /* Primary PCI bus resources */ + /* Bridge swizzling */ + u8 (*swizzle)(struct pci_dev *, u8 *); + /* IRQ mapping */ + int (*map_irq)(struct pci_dev *, u8, u8); + struct hw_pci *hw; +}; + +/* + * This is the standard PCI-PCI bridge swizzling algorithm. + */ +u8 pci_std_swizzle(struct pci_dev *dev, u8 *pinp); + +/* + * Call this with your hw_pci struct to initialise the PCI system. + */ +void pci_common_init(struct hw_pci *); + +/* + * PCI controllers + */ +extern int iop3xx_pci_setup(int nr, struct pci_sys_data *); +extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *); +extern void iop3xx_pci_preinit(void); +extern void iop3xx_pci_preinit_cond(void); + +extern int dc21285_setup(int nr, struct pci_sys_data *); +extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *); +extern void dc21285_preinit(void); +extern void dc21285_postinit(void); + +extern int via82c505_setup(int nr, struct pci_sys_data *); +extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *); +extern void via82c505_init(void *sysdata); + +extern int pci_v3_setup(int nr, struct pci_sys_data *); +extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *); +extern void pci_v3_preinit(void); +extern void pci_v3_postinit(void); diff --git a/include/asm-avr32/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h similarity index 94% rename from include/asm-avr32/mach/serial_at91.h rename to arch/arm/include/asm/mach/serial_at91.h index 55b317a89061b58ca673b0fe080ed3a361aecf69..ea6d063923b8f0b3d1b16a8c79b5aeb094d92cc7 100644 --- a/include/asm-avr32/mach/serial_at91.h +++ b/arch/arm/include/asm/mach/serial_at91.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/serial_at91.h + * arch/arm/include/asm/mach/serial_at91.h * * Based on serial_sa1100.h by Nicolas Pitre * diff --git a/include/asm-arm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h similarity index 86% rename from include/asm-arm/mach/serial_sa1100.h rename to arch/arm/include/asm/mach/serial_sa1100.h index 20c22bb218d92493240fae963cd0816d67d514a4..d09064bf95a0d465a578c821c55fb9a57f24e01b 100644 --- a/include/asm-arm/mach/serial_sa1100.h +++ b/arch/arm/include/asm/mach/serial_sa1100.h @@ -1,9 +1,9 @@ /* - * linux/include/asm-arm/mach/serial_sa1100.h + * arch/arm/include/asm/mach/serial_sa1100.h * * Author: Nicolas Pitre * - * Moved to include/asm-arm/mach and changed lots, Russell King + * Moved and changed lots, Russell King * * Low level machine dependent UART functions. */ diff --git a/include/asm-arm/mach/sharpsl_param.h b/arch/arm/include/asm/mach/sharpsl_param.h similarity index 100% rename from include/asm-arm/mach/sharpsl_param.h rename to arch/arm/include/asm/mach/sharpsl_param.h diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h new file mode 100644 index 0000000000000000000000000000000000000000..b2cc1fcd040059f2381c8491dfe0d94568615372 --- /dev/null +++ b/arch/arm/include/asm/mach/time.h @@ -0,0 +1,57 @@ +/* + * arch/arm/include/asm/mach/time.h + * + * Copyright (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_MACH_TIME_H +#define __ASM_ARM_MACH_TIME_H + +#include + +/* + * This is our kernel timer structure. + * + * - init + * Initialise the kernels jiffy timer source, claim interrupt + * using setup_irq. This is called early on during initialisation + * while interrupts are still disabled on the local CPU. + * - suspend + * Suspend the kernel jiffy timer source, if necessary. This + * is called with interrupts disabled, after all normal devices + * have been suspended. If no action is required, set this to + * NULL. + * - resume + * Resume the kernel jiffy timer source, if necessary. This + * is called with interrupts disabled before any normal devices + * are resumed. If no action is required, set this to NULL. + * - offset + * Return the timer offset in microseconds since the last timer + * interrupt. Note: this must take account of any unprocessed + * timer interrupt which may be pending. + */ +struct sys_timer { + struct sys_device dev; + void (*init)(void); + void (*suspend)(void); + void (*resume)(void); +#ifndef CONFIG_GENERIC_TIME + unsigned long (*offset)(void); +#endif +}; + +extern struct sys_timer *system_timer; +extern void timer_tick(void); + +/* + * Kernel time keeping support. + */ +struct timespec; +extern int (*set_rtc)(void); +extern void save_time_delta(struct timespec *delta, struct timespec *rtc); +extern void restore_time_delta(struct timespec *delta, struct timespec *rtc); + +#endif diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h similarity index 93% rename from include/asm-arm/mach/udc_pxa2xx.h rename to arch/arm/include/asm/mach/udc_pxa2xx.h index f9f3606986c27fedea03382b9de34ba1a7667e89..270902c353fde579c62f9fd53e83d8cc28ddbefa 100644 --- a/include/asm-arm/mach/udc_pxa2xx.h +++ b/arch/arm/include/asm/mach/udc_pxa2xx.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/udc_pxa2xx.h + * arch/arm/include/asm/mach/udc_pxa2xx.h * * This supports machine-specific differences in how the PXA2xx * USB Device Controller (UDC) is wired. @@ -23,6 +23,7 @@ struct pxa2xx_udc_mach_info { */ bool gpio_vbus_inverted; u16 gpio_vbus; /* high == vbus present */ + bool gpio_pullup_inverted; u16 gpio_pullup; /* high == pullup activated */ }; diff --git a/arch/arm/include/asm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h new file mode 100644 index 0000000000000000000000000000000000000000..e1ca48a9e973442aaeff9333990a457c155be394 --- /dev/null +++ b/arch/arm/include/asm/mc146818rtc.h @@ -0,0 +1,28 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + +#include +#include + +#ifndef RTC_PORT +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +outb_p((val),RTC_PORT(1)); \ +}) + +#endif /* _ASM_MC146818RTC_H */ diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h new file mode 100644 index 0000000000000000000000000000000000000000..1e070a2b561aa3390a02abf4ce0263b06a9055f0 --- /dev/null +++ b/arch/arm/include/asm/memory.h @@ -0,0 +1,334 @@ +/* + * arch/arm/include/asm/memory.h + * + * Copyright (C) 2000-2002 Russell King + * modification for nommu, Hyok S. Choi, 2004 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Note: this file should not be included by non-asm/.h files + */ +#ifndef __ASM_ARM_MEMORY_H +#define __ASM_ARM_MEMORY_H + +/* + * Allow for constants defined here to be used from assembly code + * by prepending the UL suffix only with actual C code compilation. + */ +#ifndef __ASSEMBLY__ +#define UL(x) (x##UL) +#else +#define UL(x) (x) +#endif + +#include +#include +#include + +#ifdef CONFIG_MMU + +#ifndef TASK_SIZE +/* + * TASK_SIZE - the maximum size of a user space task. + * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area + */ +#define TASK_SIZE UL(0xbf000000) +#define TASK_UNMAPPED_BASE UL(0x40000000) +#endif + +/* + * The maximum size of a 26-bit user space task. + */ +#define TASK_SIZE_26 UL(0x04000000) + +/* + * Page offset: 3GB + */ +#ifndef PAGE_OFFSET +#define PAGE_OFFSET UL(0xc0000000) +#endif + +/* + * The module space lives between the addresses given by TASK_SIZE + * and PAGE_OFFSET - it must be within 32MB of the kernel text. + */ +#define MODULE_END (PAGE_OFFSET) +#define MODULE_START (MODULE_END - 16*1048576) + +#if TASK_SIZE > MODULE_START +#error Top of user space clashes with start of module space +#endif + +/* + * The XIP kernel gets mapped at the bottom of the module vm area. + * Since we use sections to map it, this macro replaces the physical address + * with its virtual address while keeping offset from the base section. + */ +#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff)) + +/* + * Allow 16MB-aligned ioremap pages + */ +#define IOREMAP_MAX_ORDER 24 + +#else /* CONFIG_MMU */ + +/* + * The limitation of user task size can grow up to the end of free ram region. + * It is difficult to define and perhaps will never meet the original meaning + * of this define that was meant to. + * Fortunately, there is no reference for this in noMMU mode, for now. + */ +#ifndef TASK_SIZE +#define TASK_SIZE (CONFIG_DRAM_SIZE) +#endif + +#ifndef TASK_UNMAPPED_BASE +#define TASK_UNMAPPED_BASE UL(0x00000000) +#endif + +#ifndef PHYS_OFFSET +#define PHYS_OFFSET (CONFIG_DRAM_BASE) +#endif + +#ifndef END_MEM +#define END_MEM (CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE) +#endif + +#ifndef PAGE_OFFSET +#define PAGE_OFFSET (PHYS_OFFSET) +#endif + +/* + * The module can be at any place in ram in nommu mode. + */ +#define MODULE_END (END_MEM) +#define MODULE_START (PHYS_OFFSET) + +#endif /* !CONFIG_MMU */ + +/* + * Size of DMA-consistent memory region. Must be multiple of 2M, + * between 2MB and 14MB inclusive. + */ +#ifndef CONSISTENT_DMA_SIZE +#define CONSISTENT_DMA_SIZE SZ_2M +#endif + +/* + * Physical vs virtual RAM address space conversion. These are + * private definitions which should NOT be used outside memory.h + * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. + */ +#ifndef __virt_to_phys +#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) +#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) +#endif + +/* + * Convert a physical address to a Page Frame Number and back + */ +#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT) +#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT) + +#ifndef __ASSEMBLY__ + +/* + * The DMA mask corresponding to the maximum bus address allocatable + * using GFP_DMA. The default here places no restriction on DMA + * allocations. This must be the smallest DMA mask in the system, + * so a successful GFP_DMA allocation will always satisfy this. + */ +#ifndef ISA_DMA_THRESHOLD +#define ISA_DMA_THRESHOLD (0xffffffffULL) +#endif + +#ifndef arch_adjust_zones +#define arch_adjust_zones(node,size,holes) do { } while (0) +#endif + +/* + * PFNs are used to describe any physical page; this means + * PFN 0 == physical address 0. + * + * This is the PFN of the first RAM page in the kernel + * direct-mapped view. We assume this is the first page + * of RAM in the mem_map as well. + */ +#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT) + +/* + * These are *only* valid on the kernel direct mapped RAM memory. + * Note: Drivers should NOT use these. They are the wrong + * translation for translating DMA addresses. Use the driver + * DMA support - see dma-mapping.h. + */ +static inline unsigned long virt_to_phys(void *x) +{ + return __virt_to_phys((unsigned long)(x)); +} + +static inline void *phys_to_virt(unsigned long x) +{ + return (void *)(__phys_to_virt((unsigned long)(x))); +} + +/* + * Drivers should NOT use these either. + */ +#define __pa(x) __virt_to_phys((unsigned long)(x)) +#define __va(x) ((void *)__phys_to_virt((unsigned long)(x))) +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) + +/* + * Virtual <-> DMA view memory address translations + * Again, these are *only* valid on the kernel direct mapped RAM + * memory. Use of these is *deprecated* (and that doesn't mean + * use the __ prefixed forms instead.) See dma-mapping.h. + */ +static inline __deprecated unsigned long virt_to_bus(void *x) +{ + return __virt_to_bus((unsigned long)x); +} + +static inline __deprecated void *bus_to_virt(unsigned long x) +{ + return (void *)__bus_to_virt(x); +} + +/* + * Conversion between a struct page and a physical address. + * + * Note: when converting an unknown physical address to a + * struct page, the resulting pointer must be validated + * using VALID_PAGE(). It must return an invalid struct page + * for any physical address not corresponding to a system + * RAM address. + * + * page_to_pfn(page) convert a struct page * to a PFN number + * pfn_to_page(pfn) convert a _valid_ PFN number to struct page * + * pfn_valid(pfn) indicates whether a PFN number is valid + * + * virt_to_page(k) convert a _valid_ virtual address to struct page * + * virt_addr_valid(k) indicates whether a virtual address is valid + */ +#ifndef CONFIG_DISCONTIGMEM + +#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET + +#ifndef CONFIG_SPARSEMEM +#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr)) +#endif + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) + +#define PHYS_TO_NID(addr) (0) + +#else /* CONFIG_DISCONTIGMEM */ + +/* + * This is more complex. We have a set of mem_map arrays spread + * around in memory. + */ +#include + +#define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn) +#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT) + +#define pfn_valid(pfn) \ + ({ \ + unsigned int nid = PFN_TO_NID(pfn); \ + int valid = nid < MAX_NUMNODES; \ + if (valid) { \ + pg_data_t *node = NODE_DATA(nid); \ + valid = (pfn - node->node_start_pfn) < \ + node->node_spanned_pages; \ + } \ + valid; \ + }) + +#define virt_to_page(kaddr) \ + (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr)) + +#define virt_addr_valid(kaddr) (KVADDR_TO_NID(kaddr) < MAX_NUMNODES) + +/* + * Common discontigmem stuff. + * PHYS_TO_NID is used by the ARM kernel/setup.c + */ +#define PHYS_TO_NID(addr) PFN_TO_NID((addr) >> PAGE_SHIFT) + +/* + * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory + * and returns the mem_map of that node. + */ +#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) + +/* + * Given a page frame number, find the owning node of the memory + * and returns the mem_map of that node. + */ +#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) + +#ifdef NODE_MEM_SIZE_BITS +#define NODE_MEM_SIZE_MASK ((1 << NODE_MEM_SIZE_BITS) - 1) + +/* + * Given a kernel address, find the home node of the underlying memory. + */ +#define KVADDR_TO_NID(addr) \ + (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS) + +/* + * Given a page frame number, convert it to a node id. + */ +#define PFN_TO_NID(pfn) \ + (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT)) + +/* + * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory + * and returns the index corresponding to the appropriate page in the + * node's mem_map. + */ +#define LOCAL_MAP_NR(addr) \ + (((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT) + +#endif /* NODE_MEM_SIZE_BITS */ + +#endif /* !CONFIG_DISCONTIGMEM */ + +/* + * For BIO. "will die". Kill me when bio_to_phys() and bvec_to_phys() die. + */ +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +/* + * Optional device DMA address remapping. Do _not_ use directly! + * We should really eliminate virt_to_bus() here - it's deprecated. + */ +#ifndef __arch_page_to_dma +#define page_to_dma(dev, page) ((dma_addr_t)__virt_to_bus((unsigned long)page_address(page))) +#define dma_to_virt(dev, addr) ((void *)__bus_to_virt(addr)) +#define virt_to_dma(dev, addr) ((dma_addr_t)__virt_to_bus((unsigned long)(addr))) +#else +#define page_to_dma(dev, page) (__arch_page_to_dma(dev, page)) +#define dma_to_virt(dev, addr) (__arch_dma_to_virt(dev, addr)) +#define virt_to_dma(dev, addr) (__arch_virt_to_dma(dev, addr)) +#endif + +/* + * Optional coherency support. Currently used only by selected + * Intel XSC3-based systems. + */ +#ifndef arch_is_coherent +#define arch_is_coherent() 0 +#endif + +#endif + +#include + +#endif diff --git a/include/asm-arm/mman.h b/arch/arm/include/asm/mman.h similarity index 100% rename from include/asm-arm/mman.h rename to arch/arm/include/asm/mman.h diff --git a/include/asm-arm/mmu.h b/arch/arm/include/asm/mmu.h similarity index 100% rename from include/asm-arm/mmu.h rename to arch/arm/include/asm/mmu.h diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h new file mode 100644 index 0000000000000000000000000000000000000000..a301e446007f541826a33d6f45d330f365222bec --- /dev/null +++ b/arch/arm/include/asm/mmu_context.h @@ -0,0 +1,117 @@ +/* + * arch/arm/include/asm/mmu_context.h + * + * Copyright (C) 1996 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 27-06-1996 RMK Created + */ +#ifndef __ASM_ARM_MMU_CONTEXT_H +#define __ASM_ARM_MMU_CONTEXT_H + +#include +#include +#include +#include + +void __check_kvm_seq(struct mm_struct *mm); + +#ifdef CONFIG_CPU_HAS_ASID + +/* + * On ARMv6, we have the following structure in the Context ID: + * + * 31 7 0 + * +-------------------------+-----------+ + * | process ID | ASID | + * +-------------------------+-----------+ + * | context ID | + * +-------------------------------------+ + * + * The ASID is used to tag entries in the CPU caches and TLBs. + * The context ID is used by debuggers and trace logic, and + * should be unique within all running processes. + */ +#define ASID_BITS 8 +#define ASID_MASK ((~0) << ASID_BITS) +#define ASID_FIRST_VERSION (1 << ASID_BITS) + +extern unsigned int cpu_last_asid; + +void __init_new_context(struct task_struct *tsk, struct mm_struct *mm); +void __new_context(struct mm_struct *mm); + +static inline void check_context(struct mm_struct *mm) +{ + if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) + __new_context(mm); + + if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) + __check_kvm_seq(mm); +} + +#define init_new_context(tsk,mm) (__init_new_context(tsk,mm),0) + +#else + +static inline void check_context(struct mm_struct *mm) +{ + if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) + __check_kvm_seq(mm); +} + +#define init_new_context(tsk,mm) 0 + +#endif + +#define destroy_context(mm) do { } while(0) + +/* + * This is called when "tsk" is about to enter lazy TLB mode. + * + * mm: describes the currently active mm context + * tsk: task which is entering lazy tlb + * cpu: cpu number which is entering lazy tlb + * + * tsk->mm will be NULL + */ +static inline void +enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +/* + * This is the actual mm switch as far as the scheduler + * is concerned. No registers are touched. We avoid + * calling the CPU specific function when the mm hasn't + * actually changed. + */ +static inline void +switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ +#ifdef CONFIG_MMU + unsigned int cpu = smp_processor_id(); + +#ifdef CONFIG_SMP + /* check for possible thread migration */ + if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask)) + __flush_icache_all(); +#endif + if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) { + check_context(next); + cpu_switch_mm(next->pgd, next); + if (cache_is_vivt()) + cpu_clear(cpu, prev->cpu_vm_mask); + } +#endif +} + +#define deactivate_mm(tsk,mm) do { } while (0) +#define activate_mm(prev,next) switch_mm(prev, next, NULL) + +#endif diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h new file mode 100644 index 0000000000000000000000000000000000000000..ae63a4fd28c83c8c7786b32550220cf6ad9f83f1 --- /dev/null +++ b/arch/arm/include/asm/mmzone.h @@ -0,0 +1,30 @@ +/* + * arch/arm/include/asm/mmzone.h + * + * 1999-12-29 Nicolas Pitre Created + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_MMZONE_H +#define __ASM_MMZONE_H + +/* + * Currently defined in arch/arm/mm/discontig.c + */ +extern pg_data_t discontig_node_data[]; + +/* + * Return a pointer to the node data for node n. + */ +#define NODE_DATA(nid) (&discontig_node_data[nid]) + +/* + * NODE_MEM_MAP gives the kaddr for the mem_map of the node. + */ +#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) + +#include + +#endif diff --git a/include/asm-arm/module.h b/arch/arm/include/asm/module.h similarity index 100% rename from include/asm-arm/module.h rename to arch/arm/include/asm/module.h diff --git a/include/asm-arm/msgbuf.h b/arch/arm/include/asm/msgbuf.h similarity index 100% rename from include/asm-arm/msgbuf.h rename to arch/arm/include/asm/msgbuf.h diff --git a/arch/arm/include/asm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h new file mode 100644 index 0000000000000000000000000000000000000000..4225372a26f30e594bebfb98c307a06f28ff83a4 --- /dev/null +++ b/arch/arm/include/asm/mtd-xip.h @@ -0,0 +1,26 @@ +/* + * MTD primitives for XIP support. Architecture specific functions + * + * Do not include this file directly. It's included from linux/mtd/xip.h + * + * Author: Nicolas Pitre + * Created: Nov 2, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ + */ + +#ifndef __ARM_MTD_XIP_H__ +#define __ARM_MTD_XIP_H__ + +#include +#include + +/* fill instruction prefetch */ +#define xip_iprefetch() do { asm volatile (".rep 8; nop; .endr"); } while (0) + +#endif /* __ARM_MTD_XIP_H__ */ diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h new file mode 100644 index 0000000000000000000000000000000000000000..93226cf23ae0a838e192be1d675ee886be9dd52e --- /dev/null +++ b/arch/arm/include/asm/mutex.h @@ -0,0 +1,127 @@ +/* + * arch/arm/include/asm/mutex.h + * + * ARM optimized mutex locking primitives + * + * Please look into asm-generic/mutex-xchg.h for a formal definition. + */ +#ifndef _ASM_MUTEX_H +#define _ASM_MUTEX_H + +#if __LINUX_ARM_ARCH__ < 6 +/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */ +# include +#else + +/* + * Attempting to lock a mutex on ARMv6+ can be done with a bastardized + * atomic decrement (it is not a reliable atomic decrement but it satisfies + * the defined semantics for our purpose, while being smaller and faster + * than a real atomic decrement or atomic swap. The idea is to attempt + * decrementing the lock value only once. If once decremented it isn't zero, + * or if its store-back fails due to a dispute on the exclusive store, we + * simply bail out immediately through the slow path where the lock will be + * reattempted until it succeeds. + */ +static inline void +__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res; + + __asm__ ( + + "ldrex %0, [%2] \n\t" + "sub %0, %0, #1 \n\t" + "strex %1, %0, [%2] " + + : "=&r" (__res), "=&r" (__ex_flag) + : "r" (&(count)->counter) + : "cc","memory" ); + + __res |= __ex_flag; + if (unlikely(__res != 0)) + fail_fn(count); +} + +static inline int +__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res; + + __asm__ ( + + "ldrex %0, [%2] \n\t" + "sub %0, %0, #1 \n\t" + "strex %1, %0, [%2] " + + : "=&r" (__res), "=&r" (__ex_flag) + : "r" (&(count)->counter) + : "cc","memory" ); + + __res |= __ex_flag; + if (unlikely(__res != 0)) + __res = fail_fn(count); + return __res; +} + +/* + * Same trick is used for the unlock fast path. However the original value, + * rather than the result, is used to test for success in order to have + * better generated assembly. + */ +static inline void +__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res, __orig; + + __asm__ ( + + "ldrex %0, [%3] \n\t" + "add %1, %0, #1 \n\t" + "strex %2, %1, [%3] " + + : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) + : "r" (&(count)->counter) + : "cc","memory" ); + + __orig |= __ex_flag; + if (unlikely(__orig != 0)) + fail_fn(count); +} + +/* + * If the unlock was done on a contended lock, or if the unlock simply fails + * then the mutex remains locked. + */ +#define __mutex_slowpath_needs_to_unlock() 1 + +/* + * For __mutex_fastpath_trylock we use another construct which could be + * described as a "single value cmpxchg". + * + * This provides the needed trylock semantics like cmpxchg would, but it is + * lighter and less generic than a true cmpxchg implementation. + */ +static inline int +__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res, __orig; + + __asm__ ( + + "1: ldrex %0, [%3] \n\t" + "subs %1, %0, #1 \n\t" + "strexeq %2, %1, [%3] \n\t" + "movlt %0, #0 \n\t" + "cmpeq %2, #0 \n\t" + "bgt 1b " + + : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) + : "r" (&count->counter) + : "cc", "memory" ); + + return __orig; +} + +#endif +#endif diff --git a/include/asm-arm/nwflash.h b/arch/arm/include/asm/nwflash.h similarity index 100% rename from include/asm-arm/nwflash.h rename to arch/arm/include/asm/nwflash.h diff --git a/include/asm-arm/page-nommu.h b/arch/arm/include/asm/page-nommu.h similarity index 88% rename from include/asm-arm/page-nommu.h rename to arch/arm/include/asm/page-nommu.h index a1bcad0604805bc3fbc736bc14c31f80039b6987..3574c0deb37fc34de5d4dd752e9cf30b2ef6305e 100644 --- a/include/asm-arm/page-nommu.h +++ b/arch/arm/include/asm/page-nommu.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/page-nommu.h + * arch/arm/include/asm/page-nommu.h * * Copyright (C) 2004 Hyok S. Choi * @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + #ifndef _ASMARM_PAGE_NOMMU_H #define _ASMARM_PAGE_NOMMU_H @@ -42,9 +43,6 @@ typedef unsigned long pgprot_t; #define __pmd(x) (x) #define __pgprot(x) (x) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - extern unsigned long memory_start; extern unsigned long memory_end; diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h new file mode 100644 index 0000000000000000000000000000000000000000..cf2e2680daaa1c03ede70035d4497414f917d88a --- /dev/null +++ b/arch/arm/include/asm/page.h @@ -0,0 +1,199 @@ +/* + * arch/arm/include/asm/page.h + * + * Copyright (C) 1995-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_PAGE_H +#define _ASMARM_PAGE_H + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 12 +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#ifndef __ASSEMBLY__ + +#ifndef CONFIG_MMU + +#include "page-nommu.h" + +#else + +#include + +/* + * User Space Model + * ================ + * + * This section selects the correct set of functions for dealing with + * page-based copying and clearing for user space for the particular + * processor(s) we're building for. + * + * We have the following to choose from: + * v3 - ARMv3 + * v4wt - ARMv4 with writethrough cache, without minicache + * v4wb - ARMv4 with writeback cache, without minicache + * v4_mc - ARMv4 with minicache + * xscale - Xscale + * xsc3 - XScalev3 + */ +#undef _USER +#undef MULTI_USER + +#ifdef CONFIG_CPU_COPY_V3 +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER v3 +# endif +#endif + +#ifdef CONFIG_CPU_COPY_V4WT +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER v4wt +# endif +#endif + +#ifdef CONFIG_CPU_COPY_V4WB +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER v4wb +# endif +#endif + +#ifdef CONFIG_CPU_COPY_FEROCEON +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER feroceon +# endif +#endif + +#ifdef CONFIG_CPU_SA1100 +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER v4_mc +# endif +#endif + +#ifdef CONFIG_CPU_XSCALE +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER xscale_mc +# endif +#endif + +#ifdef CONFIG_CPU_XSC3 +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER xsc3_mc +# endif +#endif + +#ifdef CONFIG_CPU_COPY_V6 +# define MULTI_USER 1 +#endif + +#if !defined(_USER) && !defined(MULTI_USER) +#error Unknown user operations model +#endif + +struct cpu_user_fns { + void (*cpu_clear_user_page)(void *p, unsigned long user); + void (*cpu_copy_user_page)(void *to, const void *from, + unsigned long user); +}; + +#ifdef MULTI_USER +extern struct cpu_user_fns cpu_user; + +#define __cpu_clear_user_page cpu_user.cpu_clear_user_page +#define __cpu_copy_user_page cpu_user.cpu_copy_user_page + +#else + +#define __cpu_clear_user_page __glue(_USER,_clear_user_page) +#define __cpu_copy_user_page __glue(_USER,_copy_user_page) + +extern void __cpu_clear_user_page(void *p, unsigned long user); +extern void __cpu_copy_user_page(void *to, const void *from, + unsigned long user); +#endif + +#define clear_user_page(addr,vaddr,pg) __cpu_clear_user_page(addr, vaddr) +#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr) + +#define clear_page(page) memzero((void *)(page), PAGE_SIZE) +extern void copy_page(void *to, const void *from); + +#undef STRICT_MM_TYPECHECKS + +#ifdef STRICT_MM_TYPECHECKS +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd; } pmd_t; +typedef struct { unsigned long pgd[2]; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd[0]) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#else +/* + * .. while these make it easier on the compiler + */ +typedef unsigned long pte_t; +typedef unsigned long pmd_t; +typedef unsigned long pgd_t[2]; +typedef unsigned long pgprot_t; + +#define pte_val(x) (x) +#define pmd_val(x) (x) +#define pgd_val(x) ((x)[0]) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __pmd(x) (x) +#define __pgprot(x) (x) + +#endif /* STRICT_MM_TYPECHECKS */ + +#endif /* CONFIG_MMU */ + +typedef struct page *pgtable_t; + +#include + +#endif /* !__ASSEMBLY__ */ + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +/* + * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers. + */ +#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) +#define ARCH_SLAB_MINALIGN 8 +#endif + +#include + +#endif diff --git a/arch/arm/include/asm/param.h b/arch/arm/include/asm/param.h new file mode 100644 index 0000000000000000000000000000000000000000..8b24bf94c06baac0e054c88c402e1ac01eed4bb1 --- /dev/null +++ b/arch/arm/include/asm/param.h @@ -0,0 +1,31 @@ +/* + * arch/arm/include/asm/param.h + * + * Copyright (C) 1995-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_PARAM_H +#define __ASM_PARAM_H + +#ifdef __KERNEL__ +# define HZ CONFIG_HZ /* Internal kernel timer frequency */ +# define USER_HZ 100 /* User interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#else +# define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +/* max length of hostname */ +#define MAXHOSTNAMELEN 64 + +#endif + diff --git a/arch/arm/include/asm/parport.h b/arch/arm/include/asm/parport.h new file mode 100644 index 0000000000000000000000000000000000000000..26e94b09035a77bcdaf49405b9e83607b7af8704 --- /dev/null +++ b/arch/arm/include/asm/parport.h @@ -0,0 +1,18 @@ +/* + * arch/arm/include/asm/parport.h: ARM-specific parport initialisation + * + * Copyright (C) 1999, 2000 Tim Waugh + * + * This file should only be included by drivers/parport/parport_pc.c. + */ + +#ifndef __ASMARM_PARPORT_H +#define __ASMARM_PARPORT_H + +static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); +static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) +{ + return parport_pc_find_isa_ports (autoirq, autodma); +} + +#endif /* !(_ASMARM_PARPORT_H) */ diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h new file mode 100644 index 0000000000000000000000000000000000000000..721c03d53f4b34ce07ae7e8c23f69942ac1e5c4f --- /dev/null +++ b/arch/arm/include/asm/pci.h @@ -0,0 +1,91 @@ +#ifndef ASMARM_PCI_H +#define ASMARM_PCI_H + +#ifdef __KERNEL__ +#include + +#include /* for PCIBIOS_MIN_* */ + +#define pcibios_scan_all_fns(a, b) 0 + +#ifdef CONFIG_PCI_HOST_ITE8152 +/* ITE bridge requires setting latency timer to avoid early bus access + termination by PIC bus mater devices +*/ +extern void pcibios_set_master(struct pci_dev *dev); +#else +static inline void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} +#endif + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +/* + * The PCI address space does equal the physical memory address space. + * The networking and block device layers use this boolean for bounce + * buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (0) + +/* + * Whether pci_unmap_{single,page} is a nop depends upon the + * configuration. + */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +#define HAVE_PCI_MMAP +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + +extern void +pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res); + +extern void +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); + +static inline struct resource * +pcibios_select_root(struct pci_dev *pdev, struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + + return root; +} + +/* + * Dummy implementation; always return 0. + */ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return 0; +} + +#endif /* __KERNEL__ */ + +#endif diff --git a/include/asm-arm/percpu.h b/arch/arm/include/asm/percpu.h similarity index 100% rename from include/asm-arm/percpu.h rename to arch/arm/include/asm/percpu.h diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h new file mode 100644 index 0000000000000000000000000000000000000000..3dcd64bf18241498e91951b82d56c3c6445b76c8 --- /dev/null +++ b/arch/arm/include/asm/pgalloc.h @@ -0,0 +1,136 @@ +/* + * arch/arm/include/asm/pgalloc.h + * + * Copyright (C) 2000-2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_PGALLOC_H +#define _ASMARM_PGALLOC_H + +#include +#include +#include +#include +#include + +#define check_pgt_cache() do { } while (0) + +#ifdef CONFIG_MMU + +#define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER)) +#define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL)) + +/* + * Since we have only two-level page tables, these are trivial + */ +#define pmd_alloc_one(mm,addr) ({ BUG(); ((pmd_t *)2); }) +#define pmd_free(mm, pmd) do { } while (0) +#define pgd_populate(mm,pmd,pte) BUG() + +extern pgd_t *get_pgd_slow(struct mm_struct *mm); +extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd); + +#define pgd_alloc(mm) get_pgd_slow(mm) +#define pgd_free(mm, pgd) free_pgd_slow(mm, pgd) + +/* + * Allocate one PTE table. + * + * This actually allocates two hardware PTE tables, but we wrap this up + * into one table thus: + * + * +------------+ + * | h/w pt 0 | + * +------------+ + * | h/w pt 1 | + * +------------+ + * | Linux pt 0 | + * +------------+ + * | Linux pt 1 | + * +------------+ + */ +static inline pte_t * +pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr) +{ + pte_t *pte; + + pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + if (pte) { + clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE); + pte += PTRS_PER_PTE; + } + + return pte; +} + +static inline pgtable_t +pte_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + struct page *pte; + + pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); + if (pte) { + void *page = page_address(pte); + clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE); + pgtable_page_ctor(pte); + } + + return pte; +} + +/* + * Free one PTE table. + */ +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + if (pte) { + pte -= PTRS_PER_PTE; + free_page((unsigned long)pte); + } +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + __free_page(pte); +} + +static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval) +{ + pmdp[0] = __pmd(pmdval); + pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); + flush_pmd_entry(pmdp); +} + +/* + * Populate the pmdp entry with a pointer to the pte. This pmd is part + * of the mm address space. + * + * Ensure that we always set both PMD entries. + */ +static inline void +pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep) +{ + unsigned long pte_ptr = (unsigned long)ptep; + + /* + * The pmd must be loaded with the physical + * address of the PTE table + */ + pte_ptr -= PTRS_PER_PTE * sizeof(void *); + __pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE); +} + +static inline void +pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep) +{ + __pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +#endif /* CONFIG_MMU */ + +#endif diff --git a/include/asm-arm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h similarity index 98% rename from include/asm-arm/pgtable-hwdef.h rename to arch/arm/include/asm/pgtable-hwdef.h index f3b5120c99fef34b598dd110790cc008eb815f7e..fd1521d5cb9dd97e07e8f5a54b7994295294a7d3 100644 --- a/include/asm-arm/pgtable-hwdef.h +++ b/arch/arm/include/asm/pgtable-hwdef.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/pgtable-hwdef.h + * arch/arm/include/asm/pgtable-hwdef.h * * Copyright (C) 1995-2002 Russell King * diff --git a/include/asm-arm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h similarity index 98% rename from include/asm-arm/pgtable-nommu.h rename to arch/arm/include/asm/pgtable-nommu.h index 386fcc10a9730da5fbd2372322a27b040625705e..b011f2e939aa703da1366306bfa75a980d217c37 100644 --- a/include/asm-arm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/pgtable-nommu.h + * arch/arm/include/asm/pgtable-nommu.h * * Copyright (C) 1995-2002 Russell King * Copyright (C) 2004 Hyok S. Choi diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h new file mode 100644 index 0000000000000000000000000000000000000000..8e21ef15bd743b9fb3b019bd7c9cc559c3c2ab61 --- /dev/null +++ b/arch/arm/include/asm/pgtable.h @@ -0,0 +1,401 @@ +/* + * arch/arm/include/asm/pgtable.h + * + * Copyright (C) 1995-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_PGTABLE_H +#define _ASMARM_PGTABLE_H + +#include +#include + +#ifndef CONFIG_MMU + +#include "pgtable-nommu.h" + +#else + +#include +#include +#include + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + * + * Note that platforms may override VMALLOC_START, but they must provide + * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space, + * which may not overlap IO space. + */ +#ifndef VMALLOC_START +#define VMALLOC_OFFSET (8*1024*1024) +#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) +#endif + +/* + * Hardware-wise, we have a two level page table structure, where the first + * level has 4096 entries, and the second level has 256 entries. Each entry + * is one 32-bit word. Most of the bits in the second level entry are used + * by hardware, and there aren't any "accessed" and "dirty" bits. + * + * Linux on the other hand has a three level page table structure, which can + * be wrapped to fit a two level page table structure easily - using the PGD + * and PTE only. However, Linux also expects one "PTE" table per page, and + * at least a "dirty" bit. + * + * Therefore, we tweak the implementation slightly - we tell Linux that we + * have 2048 entries in the first level, each of which is 8 bytes (iow, two + * hardware pointers to the second level.) The second level contains two + * hardware PTE tables arranged contiguously, followed by Linux versions + * which contain the state information Linux needs. We, therefore, end up + * with 512 entries in the "PTE" level. + * + * This leads to the page tables having the following layout: + * + * pgd pte + * | | + * +--------+ +0 + * | |-----> +------------+ +0 + * +- - - - + +4 | h/w pt 0 | + * | |-----> +------------+ +1024 + * +--------+ +8 | h/w pt 1 | + * | | +------------+ +2048 + * +- - - - + | Linux pt 0 | + * | | +------------+ +3072 + * +--------+ | Linux pt 1 | + * | | +------------+ +4096 + * + * See L_PTE_xxx below for definitions of bits in the "Linux pt", and + * PTE_xxx for definitions of bits appearing in the "h/w pt". + * + * PMD_xxx definitions refer to bits in the first level page table. + * + * The "dirty" bit is emulated by only granting hardware write permission + * iff the page is marked "writable" and "dirty" in the Linux PTE. This + * means that a write to a clean page will cause a permission fault, and + * the Linux MM layer will mark the page dirty via handle_pte_fault(). + * For the hardware to notice the permission change, the TLB entry must + * be flushed, and ptep_set_access_flags() does that for us. + * + * The "accessed" or "young" bit is emulated by a similar method; we only + * allow accesses to the page if the "young" bit is set. Accesses to the + * page will cause a fault, and handle_pte_fault() will set the young bit + * for us as long as the page is marked present in the corresponding Linux + * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is + * up to date. + * + * However, when the "young" bit is cleared, we deny access to the page + * by clearing the hardware PTE. Currently Linux does not flush the TLB + * for us in this case, which means the TLB will retain the transation + * until either the TLB entry is evicted under pressure, or a context + * switch which changes the user space mapping occurs. + */ +#define PTRS_PER_PTE 512 +#define PTRS_PER_PMD 1 +#define PTRS_PER_PGD 2048 + +/* + * PMD_SHIFT determines the size of the area a second-level page table can map + * PGDIR_SHIFT determines what a third-level page table entry can map + */ +#define PMD_SHIFT 21 +#define PGDIR_SHIFT 21 + +#define LIBRARY_TEXT_START 0x0c000000 + +#ifndef __ASSEMBLY__ +extern void __pte_error(const char *file, int line, unsigned long val); +extern void __pmd_error(const char *file, int line, unsigned long val); +extern void __pgd_error(const char *file, int line, unsigned long val); + +#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte)) +#define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd_val(pmd)) +#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd)) +#endif /* !__ASSEMBLY__ */ + +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * This is the lowest virtual address we can permit any user space + * mapping to be mapped at. This is particularly important for + * non-high vector CPUs. + */ +#define FIRST_USER_ADDRESS PAGE_SIZE + +#define FIRST_USER_PGD_NR 1 +#define USER_PTRS_PER_PGD ((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR) + +/* + * section address mask and size definitions. + */ +#define SECTION_SHIFT 20 +#define SECTION_SIZE (1UL << SECTION_SHIFT) +#define SECTION_MASK (~(SECTION_SIZE-1)) + +/* + * ARMv6 supersection address mask and size definitions. + */ +#define SUPERSECTION_SHIFT 24 +#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT) +#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1)) + +/* + * "Linux" PTE definitions. + * + * We keep two sets of PTEs - the hardware and the linux version. + * This allows greater flexibility in the way we map the Linux bits + * onto the hardware tables, and allows us to have YOUNG and DIRTY + * bits. + * + * The PTE table pointer refers to the hardware entries; the "Linux" + * entries are stored 1024 bytes below. + */ +#define L_PTE_PRESENT (1 << 0) +#define L_PTE_FILE (1 << 1) /* only when !PRESENT */ +#define L_PTE_YOUNG (1 << 1) +#define L_PTE_BUFFERABLE (1 << 2) /* matches PTE */ +#define L_PTE_CACHEABLE (1 << 3) /* matches PTE */ +#define L_PTE_USER (1 << 4) +#define L_PTE_WRITE (1 << 5) +#define L_PTE_EXEC (1 << 6) +#define L_PTE_DIRTY (1 << 7) +#define L_PTE_SHARED (1 << 10) /* shared(v6), coherent(xsc3) */ + +#ifndef __ASSEMBLY__ + +/* + * The pgprot_* and protection_map entries will be fixed up in runtime + * to include the cachable and bufferable bits based on memory policy, + * as well as any architecture dependent bits like global/ASID and SMP + * shared mapping bits. + */ +#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE +#define _L_PTE_READ L_PTE_USER | L_PTE_EXEC + +extern pgprot_t pgprot_user; +extern pgprot_t pgprot_kernel; + +#define PAGE_NONE pgprot_user +#define PAGE_COPY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ) +#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \ + L_PTE_WRITE) +#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ) +#define PAGE_KERNEL pgprot_kernel + +#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT) +#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ) +#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE) +#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ) + +#endif /* __ASSEMBLY__ */ + +/* + * The table below defines the page protection levels that we insert into our + * Linux page table version. These get translated into the best that the + * architecture can perform. Note that on most ARM hardware: + * 1) We cannot do execute protection + * 2) If we could do execute protection, then read is implied + * 3) write implies read permissions + */ +#define __P000 __PAGE_NONE +#define __P001 __PAGE_READONLY +#define __P010 __PAGE_COPY +#define __P011 __PAGE_COPY +#define __P100 __PAGE_READONLY +#define __P101 __PAGE_READONLY +#define __P110 __PAGE_COPY +#define __P111 __PAGE_COPY + +#define __S000 __PAGE_NONE +#define __S001 __PAGE_READONLY +#define __S010 __PAGE_SHARED +#define __S011 __PAGE_SHARED +#define __S100 __PAGE_READONLY +#define __S101 __PAGE_READONLY +#define __S110 __PAGE_SHARED +#define __S111 __PAGE_SHARED + +#ifndef __ASSEMBLY__ +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern struct page *empty_zero_page; +#define ZERO_PAGE(vaddr) (empty_zero_page) + +#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) +#define pfn_pte(pfn,prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))) + +#define pte_none(pte) (!pte_val(pte)) +#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_page(pte) (pfn_to_page(pte_pfn(pte))) +#define pte_offset_kernel(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) +#define pte_offset_map(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) +#define pte_offset_map_nested(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) + +#define set_pte_at(mm,addr,ptep,pteval) do { \ + set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \ + } while (0) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) +#define pte_write(pte) (pte_val(pte) & L_PTE_WRITE) +#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) +#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_special(pte) (0) + +/* + * The following only works if pte_present() is not true. + */ +#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) +#define pte_to_pgoff(x) (pte_val(x) >> 2) +#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) + +#define PTE_FILE_MAX_BITS 30 + +#define PTE_BIT_FUNC(fn,op) \ +static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } + +PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE); +PTE_BIT_FUNC(mkwrite, |= L_PTE_WRITE); +PTE_BIT_FUNC(mkclean, &= ~L_PTE_DIRTY); +PTE_BIT_FUNC(mkdirty, |= L_PTE_DIRTY); +PTE_BIT_FUNC(mkold, &= ~L_PTE_YOUNG); +PTE_BIT_FUNC(mkyoung, |= L_PTE_YOUNG); + +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +/* + * Mark the prot value as uncacheable and unbufferable. + */ +#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE)) +#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE) + +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_present(pmd) (pmd_val(pmd)) +#define pmd_bad(pmd) (pmd_val(pmd) & 2) + +#define copy_pmd(pmdpd,pmdps) \ + do { \ + pmdpd[0] = pmdps[0]; \ + pmdpd[1] = pmdps[1]; \ + flush_pmd_entry(pmdpd); \ + } while (0) + +#define pmd_clear(pmdp) \ + do { \ + pmdp[0] = __pmd(0); \ + pmdp[1] = __pmd(0); \ + clean_pmd_entry(pmdp); \ + } while (0) + +static inline pte_t *pmd_page_vaddr(pmd_t pmd) +{ + unsigned long ptr; + + ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1); + ptr += PTRS_PER_PTE * sizeof(void *); + + return __va(ptr); +} + +#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd))) + +/* + * Permanent address of a page. We never have highmem, so this is trivial. + */ +#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define mk_pte(page,prot) pfn_pte(page_to_pfn(page),prot) + +/* + * The "pgd_xxx()" functions here are trivial for a folded two-level + * setup: the pgd is never bad, and a pmd always exists (as it's folded + * into the pgd entry) + */ +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_present(pgd) (1) +#define pgd_clear(pgdp) do { } while (0) +#define set_pgd(pgd,pgdp) do { } while (0) + +/* to find an entry in a page-table-directory */ +#define pgd_index(addr) ((addr) >> PGDIR_SHIFT) + +#define pgd_offset(mm, addr) ((mm)->pgd+pgd_index(addr)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(addr) pgd_offset(&init_mm, addr) + +/* Find an entry in the second-level page table.. */ +#define pmd_offset(dir, addr) ((pmd_t *)(dir)) + +/* Find an entry in the third-level page table.. */ +#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER; + pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); + return pte; +} + +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; + +/* Encode and decode a swap entry. + * + * We support up to 32GB of swap on 4k machines + */ +#define __swp_type(x) (((x).val >> 2) & 0x7f) +#define __swp_offset(x) ((x).val >> 9) +#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) + +/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ +/* FIXME: this is not correct */ +#define kern_addr_valid(addr) (1) + +#include + +/* + * We provide our own arch_get_unmapped_area to cope with VIPT caches. + */ +#define HAVE_ARCH_UNMAPPED_AREA + +/* + * remap a physical page `pfn' of size `size' with page protection `prot' + * into virtual address `from' + */ +#define io_remap_pfn_range(vma,from,pfn,size,prot) \ + remap_pfn_range(vma, from, pfn, size, prot) + +#define pgtable_cache_init() do { } while (0) + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_MMU */ + +#endif /* _ASMARM_PGTABLE_H */ diff --git a/include/asm-arm/poll.h b/arch/arm/include/asm/poll.h similarity index 100% rename from include/asm-arm/poll.h rename to arch/arm/include/asm/poll.h diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h new file mode 100644 index 0000000000000000000000000000000000000000..2446d23bfdbffcfea8dd7e3374ab6a2955ff9ce6 --- /dev/null +++ b/arch/arm/include/asm/posix_types.h @@ -0,0 +1,77 @@ +/* + * arch/arm/include/asm/posix_types.h + * + * Copyright (C) 1996-1998 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 27-06-1996 RMK Created + */ +#ifndef __ARCH_ARM_POSIX_TYPES_H +#define __ARCH_ARM_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +#define __FD_SET(fd, fdsetp) \ + (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31))) + +#undef __FD_CLR +#define __FD_CLR(fd, fdsetp) \ + (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31))) + +#undef __FD_ISSET +#define __FD_ISSET(fd, fdsetp) \ + ((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) \ + (memset (fdsetp, 0, sizeof (*(fd_set *)(fdsetp)))) + +#endif + +#endif diff --git a/include/asm-arm/proc-fns.h b/arch/arm/include/asm/proc-fns.h similarity index 99% rename from include/asm-arm/proc-fns.h rename to arch/arm/include/asm/proc-fns.h index 75ec760f4c748a0bb9ab5722e552c45b866599b8..db80203b68e0a380ee84dfbab9cc60c279adbfad 100644 --- a/include/asm-arm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/proc-fns.h + * arch/arm/include/asm/proc-fns.h * * Copyright (C) 1997-1999 Russell King * Copyright (C) 2000 Deep Blue Solutions Ltd diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h new file mode 100644 index 0000000000000000000000000000000000000000..b01d5e7e3d5abb4a5632c1b677764310c81db243 --- /dev/null +++ b/arch/arm/include/asm/processor.h @@ -0,0 +1,131 @@ +/* + * arch/arm/include/asm/processor.h + * + * Copyright (C) 1995-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_PROCESSOR_H +#define __ASM_ARM_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#ifdef __KERNEL__ + +#include +#include + +#ifdef __KERNEL__ +#define STACK_TOP ((current->personality == PER_LINUX_32BIT) ? \ + TASK_SIZE : TASK_SIZE_26) +#define STACK_TOP_MAX TASK_SIZE +#endif + +union debug_insn { + u32 arm; + u16 thumb; +}; + +struct debug_entry { + u32 address; + union debug_insn insn; +}; + +struct debug_info { + int nsaved; + struct debug_entry bp[2]; +}; + +struct thread_struct { + /* fault info */ + unsigned long address; + unsigned long trap_no; + unsigned long error_code; + /* debugging */ + struct debug_info debug; +}; + +#define INIT_THREAD { } + +#ifdef CONFIG_MMU +#define nommu_start_thread(regs) do { } while (0) +#else +#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data +#endif + +#define start_thread(regs,pc,sp) \ +({ \ + unsigned long *stack = (unsigned long *)sp; \ + set_fs(USER_DS); \ + memzero(regs->uregs, sizeof(regs->uregs)); \ + if (current->personality & ADDR_LIMIT_32BIT) \ + regs->ARM_cpsr = USR_MODE; \ + else \ + regs->ARM_cpsr = USR26_MODE; \ + if (elf_hwcap & HWCAP_THUMB && pc & 1) \ + regs->ARM_cpsr |= PSR_T_BIT; \ + regs->ARM_pc = pc & ~1; /* pc */ \ + regs->ARM_sp = sp; /* sp */ \ + regs->ARM_r2 = stack[2]; /* r2 (envp) */ \ + regs->ARM_r1 = stack[1]; /* r1 (argv) */ \ + regs->ARM_r0 = stack[0]; /* r0 (argc) */ \ + nommu_start_thread(regs); \ +}) + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +unsigned long get_wchan(struct task_struct *p); + +#define cpu_relax() barrier() + +/* + * Create a new kernel thread + */ +extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); + +#define task_pt_regs(p) \ + ((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1) + +#define KSTK_EIP(tsk) task_pt_regs(tsk)->ARM_pc +#define KSTK_ESP(tsk) task_pt_regs(tsk)->ARM_sp + +/* + * Prefetching support - only ARMv5. + */ +#if __LINUX_ARM_ARCH__ >= 5 + +#define ARCH_HAS_PREFETCH +static inline void prefetch(const void *ptr) +{ + __asm__ __volatile__( + "pld\t%0" + : + : "o" (*(char *)ptr) + : "cc"); +} + +#define ARCH_HAS_PREFETCHW +#define prefetchw(ptr) prefetch(ptr) + +#define ARCH_HAS_SPINLOCK_PREFETCH +#define spin_lock_prefetch(x) do { } while (0) + +#endif + +#endif + +#endif /* __ASM_ARM_PROCESSOR_H */ diff --git a/include/asm-arm/procinfo.h b/arch/arm/include/asm/procinfo.h similarity index 97% rename from include/asm-arm/procinfo.h rename to arch/arm/include/asm/procinfo.h index 4d3c685075e08d9c1db94897cf4ab9ba1933681f..ca52e584ef74fd432614a5d9a2e9dc6188caa9f2 100644 --- a/include/asm-arm/procinfo.h +++ b/arch/arm/include/asm/procinfo.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/procinfo.h + * arch/arm/include/asm/procinfo.h * * Copyright (C) 1996-1999 Russell King * diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h new file mode 100644 index 0000000000000000000000000000000000000000..b415c0e85458952899b2ba910aeccfd053952584 --- /dev/null +++ b/arch/arm/include/asm/ptrace.h @@ -0,0 +1,162 @@ +/* + * arch/arm/include/asm/ptrace.h + * + * Copyright (C) 1996-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_PTRACE_H +#define __ASM_ARM_PTRACE_H + +#include + +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +/* PTRACE_ATTACH is 16 */ +/* PTRACE_DETACH is 17 */ +#define PTRACE_GETWMMXREGS 18 +#define PTRACE_SETWMMXREGS 19 +/* 20 is unused */ +#define PTRACE_OLDSETOPTIONS 21 +#define PTRACE_GET_THREAD_AREA 22 +#define PTRACE_SET_SYSCALL 23 +/* PTRACE_SYSCALL is 24 */ +#define PTRACE_GETCRUNCHREGS 25 +#define PTRACE_SETCRUNCHREGS 26 + +/* + * PSR bits + */ +#define USR26_MODE 0x00000000 +#define FIQ26_MODE 0x00000001 +#define IRQ26_MODE 0x00000002 +#define SVC26_MODE 0x00000003 +#define USR_MODE 0x00000010 +#define FIQ_MODE 0x00000011 +#define IRQ_MODE 0x00000012 +#define SVC_MODE 0x00000013 +#define ABT_MODE 0x00000017 +#define UND_MODE 0x0000001b +#define SYSTEM_MODE 0x0000001f +#define MODE32_BIT 0x00000010 +#define MODE_MASK 0x0000001f +#define PSR_T_BIT 0x00000020 +#define PSR_F_BIT 0x00000040 +#define PSR_I_BIT 0x00000080 +#define PSR_A_BIT 0x00000100 +#define PSR_J_BIT 0x01000000 +#define PSR_Q_BIT 0x08000000 +#define PSR_V_BIT 0x10000000 +#define PSR_C_BIT 0x20000000 +#define PSR_Z_BIT 0x40000000 +#define PSR_N_BIT 0x80000000 +#define PCMASK 0 + +/* + * Groups of PSR bits + */ +#define PSR_f 0xff000000 /* Flags */ +#define PSR_s 0x00ff0000 /* Status */ +#define PSR_x 0x0000ff00 /* Extension */ +#define PSR_c 0x000000ff /* Control */ + +#ifndef __ASSEMBLY__ + +/* + * This struct defines the way the registers are stored on the + * stack during a system call. Note that sizeof(struct pt_regs) + * has to be a multiple of 8. + */ +struct pt_regs { + long uregs[18]; +}; + +#define ARM_cpsr uregs[16] +#define ARM_pc uregs[15] +#define ARM_lr uregs[14] +#define ARM_sp uregs[13] +#define ARM_ip uregs[12] +#define ARM_fp uregs[11] +#define ARM_r10 uregs[10] +#define ARM_r9 uregs[9] +#define ARM_r8 uregs[8] +#define ARM_r7 uregs[7] +#define ARM_r6 uregs[6] +#define ARM_r5 uregs[5] +#define ARM_r4 uregs[4] +#define ARM_r3 uregs[3] +#define ARM_r2 uregs[2] +#define ARM_r1 uregs[1] +#define ARM_r0 uregs[0] +#define ARM_ORIG_r0 uregs[17] + +#ifdef __KERNEL__ + +#define user_mode(regs) \ + (((regs)->ARM_cpsr & 0xf) == 0) + +#ifdef CONFIG_ARM_THUMB +#define thumb_mode(regs) \ + (((regs)->ARM_cpsr & PSR_T_BIT)) +#else +#define thumb_mode(regs) (0) +#endif + +#define isa_mode(regs) \ + ((((regs)->ARM_cpsr & PSR_J_BIT) >> 23) | \ + (((regs)->ARM_cpsr & PSR_T_BIT) >> 5)) + +#define processor_mode(regs) \ + ((regs)->ARM_cpsr & MODE_MASK) + +#define interrupts_enabled(regs) \ + (!((regs)->ARM_cpsr & PSR_I_BIT)) + +#define fast_interrupts_enabled(regs) \ + (!((regs)->ARM_cpsr & PSR_F_BIT)) + +/* Are the current registers suitable for user mode? + * (used to maintain security in signal handlers) + */ +static inline int valid_user_regs(struct pt_regs *regs) +{ + if (user_mode(regs) && (regs->ARM_cpsr & PSR_I_BIT) == 0) { + regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT); + return 1; + } + + /* + * Force CPSR to something logical... + */ + regs->ARM_cpsr &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | PSR_T_BIT | MODE32_BIT; + if (!(elf_hwcap & HWCAP_26BIT)) + regs->ARM_cpsr |= USR_MODE; + + return 0; +} + +#define pc_pointer(v) \ + ((v) & ~PCMASK) + +#define instruction_pointer(regs) \ + (pc_pointer((regs)->ARM_pc)) + +#ifdef CONFIG_SMP +extern unsigned long profile_pc(struct pt_regs *regs); +#else +#define profile_pc(regs) instruction_pointer(regs) +#endif + +#define predicate(x) ((x) & 0xf0000000) +#define PREDICATE_ALWAYS 0xe0000000 + +#endif /* __KERNEL__ */ + +#endif /* __ASSEMBLY__ */ + +#endif + diff --git a/include/asm-arm/resource.h b/arch/arm/include/asm/resource.h similarity index 100% rename from include/asm-arm/resource.h rename to arch/arm/include/asm/resource.h diff --git a/include/asm-arm/scatterlist.h b/arch/arm/include/asm/scatterlist.h similarity index 100% rename from include/asm-arm/scatterlist.h rename to arch/arm/include/asm/scatterlist.h diff --git a/include/asm-arm/sections.h b/arch/arm/include/asm/sections.h similarity index 100% rename from include/asm-arm/sections.h rename to arch/arm/include/asm/sections.h diff --git a/include/asm-arm/segment.h b/arch/arm/include/asm/segment.h similarity index 100% rename from include/asm-arm/segment.h rename to arch/arm/include/asm/segment.h diff --git a/include/asm-arm/sembuf.h b/arch/arm/include/asm/sembuf.h similarity index 100% rename from include/asm-arm/sembuf.h rename to arch/arm/include/asm/sembuf.h diff --git a/arch/arm/include/asm/serial.h b/arch/arm/include/asm/serial.h new file mode 100644 index 0000000000000000000000000000000000000000..ebb049091e26033502dec932ab9015486c713894 --- /dev/null +++ b/arch/arm/include/asm/serial.h @@ -0,0 +1,19 @@ +/* + * arch/arm/include/asm/serial.h + * + * Copyright (C) 1996 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 15-10-1996 RMK Created + */ + +#ifndef __ASM_SERIAL_H +#define __ASM_SERIAL_H + +#define BASE_BAUD (1843200 / 16) + +#endif diff --git a/include/asm-arm/setup.h b/arch/arm/include/asm/setup.h similarity index 100% rename from include/asm-arm/setup.h rename to arch/arm/include/asm/setup.h diff --git a/include/asm-arm/shmbuf.h b/arch/arm/include/asm/shmbuf.h similarity index 100% rename from include/asm-arm/shmbuf.h rename to arch/arm/include/asm/shmbuf.h diff --git a/include/asm-arm/shmparam.h b/arch/arm/include/asm/shmparam.h similarity index 100% rename from include/asm-arm/shmparam.h rename to arch/arm/include/asm/shmparam.h diff --git a/include/asm-arm/sigcontext.h b/arch/arm/include/asm/sigcontext.h similarity index 100% rename from include/asm-arm/sigcontext.h rename to arch/arm/include/asm/sigcontext.h diff --git a/include/asm-arm/siginfo.h b/arch/arm/include/asm/siginfo.h similarity index 100% rename from include/asm-arm/siginfo.h rename to arch/arm/include/asm/siginfo.h diff --git a/include/asm-arm/signal.h b/arch/arm/include/asm/signal.h similarity index 100% rename from include/asm-arm/signal.h rename to arch/arm/include/asm/signal.h diff --git a/include/asm-arm/sizes.h b/arch/arm/include/asm/sizes.h similarity index 100% rename from include/asm-arm/sizes.h rename to arch/arm/include/asm/sizes.h diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h new file mode 100644 index 0000000000000000000000000000000000000000..727b5c042e522c9053873501803946a95433838b --- /dev/null +++ b/arch/arm/include/asm/smp.h @@ -0,0 +1,147 @@ +/* + * arch/arm/include/asm/smp.h + * + * Copyright (C) 2004-2005 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_SMP_H +#define __ASM_ARM_SMP_H + +#include +#include +#include + +#include + +#ifndef CONFIG_SMP +# error " included in non-SMP build" +#endif + +#define raw_smp_processor_id() (current_thread_info()->cpu) + +/* + * at the moment, there's not a big penalty for changing CPUs + * (the >big< penalty is running SMP in the first place) + */ +#define PROC_CHANGE_PENALTY 15 + +struct seq_file; + +/* + * generate IPI list text + */ +extern void show_ipi_list(struct seq_file *p); + +/* + * Called from assembly code, this handles an IPI. + */ +asmlinkage void do_IPI(struct pt_regs *regs); + +/* + * Setup the SMP cpu_possible_map + */ +extern void smp_init_cpus(void); + +/* + * Move global data into per-processor storage. + */ +extern void smp_store_cpu_info(unsigned int cpuid); + +/* + * Raise an IPI cross call on CPUs in callmap. + */ +extern void smp_cross_call(cpumask_t callmap); + +/* + * Broadcast a timer interrupt to the other CPUs. + */ +extern void smp_send_timer(void); + +/* + * Broadcast a clock event to other CPUs. + */ +extern void smp_timer_broadcast(cpumask_t mask); + +/* + * Boot a secondary CPU, and assign it the specified idle task. + * This also gives us the initial stack to use for this CPU. + */ +extern int boot_secondary(unsigned int cpu, struct task_struct *); + +/* + * Called from platform specific assembly code, this is the + * secondary CPU entry point. + */ +asmlinkage void secondary_start_kernel(void); + +/* + * Perform platform specific initialisation of the specified CPU. + */ +extern void platform_secondary_init(unsigned int cpu); + +/* + * Initial data for bringing up a secondary CPU. + */ +struct secondary_data { + unsigned long pgdir; + void *stack; +}; +extern struct secondary_data secondary_data; + +extern int __cpu_disable(void); +extern int mach_cpu_disable(unsigned int cpu); + +extern void __cpu_die(unsigned int cpu); +extern void cpu_die(void); + +extern void platform_cpu_die(unsigned int cpu); +extern int platform_cpu_kill(unsigned int cpu); +extern void platform_cpu_enable(unsigned int cpu); + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +/* + * Local timer interrupt handling function (can be IPI'ed). + */ +extern void local_timer_interrupt(void); + +#ifdef CONFIG_LOCAL_TIMERS + +/* + * Stop a local timer interrupt. + */ +extern void local_timer_stop(unsigned int cpu); + +/* + * Platform provides this to acknowledge a local timer IRQ + */ +extern int local_timer_ack(void); + +#else + +static inline void local_timer_stop(unsigned int cpu) +{ +} + +#endif + +/* + * Setup a local timer interrupt for a CPU. + */ +extern void local_timer_setup(unsigned int cpu); + +/* + * show local interrupt info + */ +extern void show_local_irqs(struct seq_file *); + +/* + * Called from assembly, this is the local timer IRQ handler + */ +asmlinkage void do_local_timer(struct pt_regs *); + +#endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/include/asm-arm/socket.h b/arch/arm/include/asm/socket.h similarity index 100% rename from include/asm-arm/socket.h rename to arch/arm/include/asm/socket.h diff --git a/include/asm-arm/sockios.h b/arch/arm/include/asm/sockios.h similarity index 100% rename from include/asm-arm/sockios.h rename to arch/arm/include/asm/sockios.h diff --git a/include/asm-arm/sparsemem.h b/arch/arm/include/asm/sparsemem.h similarity index 100% rename from include/asm-arm/sparsemem.h rename to arch/arm/include/asm/sparsemem.h diff --git a/include/asm-arm/spinlock.h b/arch/arm/include/asm/spinlock.h similarity index 100% rename from include/asm-arm/spinlock.h rename to arch/arm/include/asm/spinlock.h diff --git a/include/asm-arm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h similarity index 100% rename from include/asm-arm/spinlock_types.h rename to arch/arm/include/asm/spinlock_types.h diff --git a/include/asm-arm/stat.h b/arch/arm/include/asm/stat.h similarity index 100% rename from include/asm-arm/stat.h rename to arch/arm/include/asm/stat.h diff --git a/include/asm-arm/statfs.h b/arch/arm/include/asm/statfs.h similarity index 100% rename from include/asm-arm/statfs.h rename to arch/arm/include/asm/statfs.h diff --git a/include/asm-arm/string.h b/arch/arm/include/asm/string.h similarity index 100% rename from include/asm-arm/string.h rename to arch/arm/include/asm/string.h diff --git a/include/asm-arm/suspend.h b/arch/arm/include/asm/suspend.h similarity index 100% rename from include/asm-arm/suspend.h rename to arch/arm/include/asm/suspend.h diff --git a/include/asm-arm/system.h b/arch/arm/include/asm/system.h similarity index 100% rename from include/asm-arm/system.h rename to arch/arm/include/asm/system.h diff --git a/include/asm-arm/termbits.h b/arch/arm/include/asm/termbits.h similarity index 100% rename from include/asm-arm/termbits.h rename to arch/arm/include/asm/termbits.h diff --git a/include/asm-arm/termios.h b/arch/arm/include/asm/termios.h similarity index 100% rename from include/asm-arm/termios.h rename to arch/arm/include/asm/termios.h diff --git a/include/asm-arm/therm.h b/arch/arm/include/asm/therm.h similarity index 88% rename from include/asm-arm/therm.h rename to arch/arm/include/asm/therm.h index e51c923ecdf3119d5a4677fa13570f744b77be0a..f002f0197d78a7d6eecf2a9272c743334aefd3bd 100644 --- a/include/asm-arm/therm.h +++ b/arch/arm/include/asm/therm.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/therm.h: Definitions for Dallas Semiconductor + * arch/arm/include/asm/therm.h: Definitions for Dallas Semiconductor * DS1620 thermometer driver (as used in the Rebel.com NetWinder) */ #ifndef __ASM_THERM_H diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h new file mode 100644 index 0000000000000000000000000000000000000000..e56fa48e4ae7843436021e19fb067233c67e6a02 --- /dev/null +++ b/arch/arm/include/asm/thread_info.h @@ -0,0 +1,153 @@ +/* + * arch/arm/include/asm/thread_info.h + * + * Copyright (C) 2002 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_THREAD_INFO_H +#define __ASM_ARM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#include +#include + +#define THREAD_SIZE_ORDER 1 +#define THREAD_SIZE 8192 +#define THREAD_START_SP (THREAD_SIZE - 8) + +#ifndef __ASSEMBLY__ + +struct task_struct; +struct exec_domain; + +#include +#include + +typedef unsigned long mm_segment_t; + +struct cpu_context_save { + __u32 r4; + __u32 r5; + __u32 r6; + __u32 r7; + __u32 r8; + __u32 r9; + __u32 sl; + __u32 fp; + __u32 sp; + __u32 pc; + __u32 extra[2]; /* Xscale 'acc' register, etc */ +}; + +/* + * low level task data that entry.S needs immediate access to. + * __switch_to() assumes cpu_context follows immediately after cpu_domain. + */ +struct thread_info { + unsigned long flags; /* low level flags */ + int preempt_count; /* 0 => preemptable, <0 => bug */ + mm_segment_t addr_limit; /* address limit */ + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + __u32 cpu; /* cpu */ + __u32 cpu_domain; /* cpu domain */ + struct cpu_context_save cpu_context; /* cpu context */ + __u32 syscall; /* syscall number */ + __u8 used_cp[16]; /* thread used copro */ + unsigned long tp_value; + struct crunch_state crunchstate; + union fp_state fpstate __attribute__((aligned(8))); + union vfp_state vfpstate; +#ifdef CONFIG_ARM_THUMBEE + unsigned long thumbee_state; /* ThumbEE Handler Base register */ +#endif + struct restart_block restart_block; +}; + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .cpu_domain = domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_IO, DOMAIN_CLIENT), \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* + * how to get the thread information struct from C + */ +static inline struct thread_info *current_thread_info(void) __attribute_const__; + +static inline struct thread_info *current_thread_info(void) +{ + register unsigned long sp asm ("sp"); + return (struct thread_info *)(sp & ~(THREAD_SIZE - 1)); +} + +#define thread_saved_pc(tsk) \ + ((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc))) +#define thread_saved_fp(tsk) \ + ((unsigned long)(task_thread_info(tsk)->cpu_context.fp)) + +extern void crunch_task_disable(struct thread_info *); +extern void crunch_task_copy(struct thread_info *, void *); +extern void crunch_task_restore(struct thread_info *, void *); +extern void crunch_task_release(struct thread_info *); + +extern void iwmmxt_task_disable(struct thread_info *); +extern void iwmmxt_task_copy(struct thread_info *, void *); +extern void iwmmxt_task_restore(struct thread_info *, void *); +extern void iwmmxt_task_release(struct thread_info *); +extern void iwmmxt_task_switch(struct thread_info *); + +#endif + +/* + * We use bit 30 of the preempt_count to indicate that kernel + * preemption is occurring. See . + */ +#define PREEMPT_ACTIVE 0x40000000 + +/* + * thread information flags: + * TIF_SYSCALL_TRACE - syscall trace active + * TIF_SIGPENDING - signal pending + * TIF_NEED_RESCHED - rescheduling necessary + * TIF_USEDFPU - FPU was used by this task this quantum (SMP) + * TIF_POLLING_NRFLAG - true if poll_idle() is polling TIF_NEED_RESCHED + */ +#define TIF_SIGPENDING 0 +#define TIF_NEED_RESCHED 1 +#define TIF_SYSCALL_TRACE 8 +#define TIF_POLLING_NRFLAG 16 +#define TIF_USING_IWMMXT 17 +#define TIF_MEMDIE 18 +#define TIF_FREEZE 19 + +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) +#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) +#define _TIF_FREEZE (1 << TIF_FREEZE) + +/* + * Change these and you break ASM code in entry-common.S + */ +#define _TIF_WORK_MASK 0x000000ff + +#endif /* __KERNEL__ */ +#endif /* __ASM_ARM_THREAD_INFO_H */ diff --git a/include/asm-arm/thread_notify.h b/arch/arm/include/asm/thread_notify.h similarity index 96% rename from include/asm-arm/thread_notify.h rename to arch/arm/include/asm/thread_notify.h index 8866e52168400847d669cea1529d4a174e1e7959..f27379d7f72a670b01e2e70b2b09b97cc9c98862 100644 --- a/include/asm-arm/thread_notify.h +++ b/arch/arm/include/asm/thread_notify.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/thread_notify.h + * arch/arm/include/asm/thread_notify.h * * Copyright (C) 2006 Russell King. * diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h new file mode 100644 index 0000000000000000000000000000000000000000..3be8de3adabae95908a9a6f640d3e9e42b0f7fb1 --- /dev/null +++ b/arch/arm/include/asm/timex.h @@ -0,0 +1,24 @@ +/* + * arch/arm/include/asm/timex.h + * + * Copyright (C) 1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Architecture Specific TIME specifications + */ +#ifndef _ASMARM_TIMEX_H +#define _ASMARM_TIMEX_H + +#include + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles (void) +{ + return 0; +} + +#endif diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h new file mode 100644 index 0000000000000000000000000000000000000000..857f1dfac794c5bc5ef63a01b840f3444d0c2888 --- /dev/null +++ b/arch/arm/include/asm/tlb.h @@ -0,0 +1,94 @@ +/* + * arch/arm/include/asm/tlb.h + * + * Copyright (C) 2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Experimentation shows that on a StrongARM, it appears to be faster + * to use the "invalidate whole tlb" rather than "invalidate single + * tlb" for this. + * + * This appears true for both the process fork+exit case, as well as + * the munmap-large-area case. + */ +#ifndef __ASMARM_TLB_H +#define __ASMARM_TLB_H + +#include +#include + +#ifndef CONFIG_MMU + +#include +#include + +#else /* !CONFIG_MMU */ + +#include + +/* + * TLB handling. This allows us to remove pages from the page + * tables, and efficiently handle the TLB issues. + */ +struct mmu_gather { + struct mm_struct *mm; + unsigned int fullmm; +}; + +DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); + +static inline struct mmu_gather * +tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) +{ + struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); + + tlb->mm = mm; + tlb->fullmm = full_mm_flush; + + return tlb; +} + +static inline void +tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +{ + if (tlb->fullmm) + flush_tlb_mm(tlb->mm); + + /* keep the page table cache within bounds */ + check_pgt_cache(); + + put_cpu_var(mmu_gathers); +} + +#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0) + +/* + * In the case of tlb vma handling, we can optimise these away in the + * case where we're doing a full MM flush. When we're doing a munmap, + * the vmas are adjusted to only cover the region to be torn down. + */ +static inline void +tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) +{ + if (!tlb->fullmm) + flush_cache_range(vma, vma->vm_start, vma->vm_end); +} + +static inline void +tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) +{ + if (!tlb->fullmm) + flush_tlb_range(vma, vma->vm_start, vma->vm_end); +} + +#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) +#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep) +#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp) + +#define tlb_migrate_finish(mm) do { } while (0) + +#endif /* CONFIG_MMU */ +#endif diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h new file mode 100644 index 0000000000000000000000000000000000000000..0d0d40f1b599eccff4c709f1bbd2a412f08812bc --- /dev/null +++ b/arch/arm/include/asm/tlbflush.h @@ -0,0 +1,500 @@ +/* + * arch/arm/include/asm/tlbflush.h + * + * Copyright (C) 1999-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_TLBFLUSH_H +#define _ASMARM_TLBFLUSH_H + + +#ifndef CONFIG_MMU + +#define tlb_flush(tlb) ((void) tlb) + +#else /* CONFIG_MMU */ + +#include + +#define TLB_V3_PAGE (1 << 0) +#define TLB_V4_U_PAGE (1 << 1) +#define TLB_V4_D_PAGE (1 << 2) +#define TLB_V4_I_PAGE (1 << 3) +#define TLB_V6_U_PAGE (1 << 4) +#define TLB_V6_D_PAGE (1 << 5) +#define TLB_V6_I_PAGE (1 << 6) + +#define TLB_V3_FULL (1 << 8) +#define TLB_V4_U_FULL (1 << 9) +#define TLB_V4_D_FULL (1 << 10) +#define TLB_V4_I_FULL (1 << 11) +#define TLB_V6_U_FULL (1 << 12) +#define TLB_V6_D_FULL (1 << 13) +#define TLB_V6_I_FULL (1 << 14) + +#define TLB_V6_U_ASID (1 << 16) +#define TLB_V6_D_ASID (1 << 17) +#define TLB_V6_I_ASID (1 << 18) + +#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */ +#define TLB_DCLEAN (1 << 30) +#define TLB_WB (1 << 31) + +/* + * MMU TLB Model + * ============= + * + * We have the following to choose from: + * v3 - ARMv3 + * v4 - ARMv4 without write buffer + * v4wb - ARMv4 with write buffer without I TLB flush entry instruction + * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction + * fr - Feroceon (v4wbi with non-outer-cacheable page table walks) + * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction + */ +#undef _TLB +#undef MULTI_TLB + +#define v3_tlb_flags (TLB_V3_FULL | TLB_V3_PAGE) + +#ifdef CONFIG_CPU_TLB_V3 +# define v3_possible_flags v3_tlb_flags +# define v3_always_flags v3_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v3 +# endif +#else +# define v3_possible_flags 0 +# define v3_always_flags (-1UL) +#endif + +#define v4_tlb_flags (TLB_V4_U_FULL | TLB_V4_U_PAGE) + +#ifdef CONFIG_CPU_TLB_V4WT +# define v4_possible_flags v4_tlb_flags +# define v4_always_flags v4_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v4 +# endif +#else +# define v4_possible_flags 0 +# define v4_always_flags (-1UL) +#endif + +#define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ + TLB_V4_I_FULL | TLB_V4_D_FULL | \ + TLB_V4_I_PAGE | TLB_V4_D_PAGE) + +#ifdef CONFIG_CPU_TLB_V4WBI +# define v4wbi_possible_flags v4wbi_tlb_flags +# define v4wbi_always_flags v4wbi_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v4wbi +# endif +#else +# define v4wbi_possible_flags 0 +# define v4wbi_always_flags (-1UL) +#endif + +#define fr_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \ + TLB_V4_I_FULL | TLB_V4_D_FULL | \ + TLB_V4_I_PAGE | TLB_V4_D_PAGE) + +#ifdef CONFIG_CPU_TLB_FEROCEON +# define fr_possible_flags fr_tlb_flags +# define fr_always_flags fr_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v4wbi +# endif +#else +# define fr_possible_flags 0 +# define fr_always_flags (-1UL) +#endif + +#define v4wb_tlb_flags (TLB_WB | TLB_DCLEAN | \ + TLB_V4_I_FULL | TLB_V4_D_FULL | \ + TLB_V4_D_PAGE) + +#ifdef CONFIG_CPU_TLB_V4WB +# define v4wb_possible_flags v4wb_tlb_flags +# define v4wb_always_flags v4wb_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v4wb +# endif +#else +# define v4wb_possible_flags 0 +# define v4wb_always_flags (-1UL) +#endif + +#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ + TLB_V6_I_FULL | TLB_V6_D_FULL | \ + TLB_V6_I_PAGE | TLB_V6_D_PAGE | \ + TLB_V6_I_ASID | TLB_V6_D_ASID) + +#ifdef CONFIG_CPU_TLB_V6 +# define v6wbi_possible_flags v6wbi_tlb_flags +# define v6wbi_always_flags v6wbi_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v6wbi +# endif +#else +# define v6wbi_possible_flags 0 +# define v6wbi_always_flags (-1UL) +#endif + +#ifdef CONFIG_CPU_TLB_V7 +# define v7wbi_possible_flags v6wbi_tlb_flags +# define v7wbi_always_flags v6wbi_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v7wbi +# endif +#else +# define v7wbi_possible_flags 0 +# define v7wbi_always_flags (-1UL) +#endif + +#ifndef _TLB +#error Unknown TLB model +#endif + +#ifndef __ASSEMBLY__ + +#include + +struct cpu_tlb_fns { + void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *); + void (*flush_kern_range)(unsigned long, unsigned long); + unsigned long tlb_flags; +}; + +/* + * Select the calling method + */ +#ifdef MULTI_TLB + +#define __cpu_flush_user_tlb_range cpu_tlb.flush_user_range +#define __cpu_flush_kern_tlb_range cpu_tlb.flush_kern_range + +#else + +#define __cpu_flush_user_tlb_range __glue(_TLB,_flush_user_tlb_range) +#define __cpu_flush_kern_tlb_range __glue(_TLB,_flush_kern_tlb_range) + +extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *); +extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long); + +#endif + +extern struct cpu_tlb_fns cpu_tlb; + +#define __cpu_tlb_flags cpu_tlb.tlb_flags + +/* + * TLB Management + * ============== + * + * The arch/arm/mm/tlb-*.S files implement these methods. + * + * The TLB specific code is expected to perform whatever tests it + * needs to determine if it should invalidate the TLB for each + * call. Start addresses are inclusive and end addresses are + * exclusive; it is safe to round these addresses down. + * + * flush_tlb_all() + * + * Invalidate the entire TLB. + * + * flush_tlb_mm(mm) + * + * Invalidate all TLB entries in a particular address + * space. + * - mm - mm_struct describing address space + * + * flush_tlb_range(mm,start,end) + * + * Invalidate a range of TLB entries in the specified + * address space. + * - mm - mm_struct describing address space + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + * + * flush_tlb_page(vaddr,vma) + * + * Invalidate the specified page in the specified address range. + * - vaddr - virtual address (may not be aligned) + * - vma - vma_struct describing address range + * + * flush_kern_tlb_page(kaddr) + * + * Invalidate the TLB entry for the specified page. The address + * will be in the kernels virtual memory space. Current uses + * only require the D-TLB to be invalidated. + * - kaddr - Kernel virtual memory address + */ + +/* + * We optimise the code below by: + * - building a set of TLB flags that might be set in __cpu_tlb_flags + * - building a set of TLB flags that will always be set in __cpu_tlb_flags + * - if we're going to need __cpu_tlb_flags, access it once and only once + * + * This allows us to build optimal assembly for the single-CPU type case, + * and as close to optimal given the compiler constrants for multi-CPU + * case. We could do better for the multi-CPU case if the compiler + * implemented the "%?" method, but this has been discontinued due to too + * many people getting it wrong. + */ +#define possible_tlb_flags (v3_possible_flags | \ + v4_possible_flags | \ + v4wbi_possible_flags | \ + fr_possible_flags | \ + v4wb_possible_flags | \ + v6wbi_possible_flags) + +#define always_tlb_flags (v3_always_flags & \ + v4_always_flags & \ + v4wbi_always_flags & \ + fr_always_flags & \ + v4wb_always_flags & \ + v6wbi_always_flags) + +#define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f))) + +static inline void local_flush_tlb_all(void) +{ + const int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_WB)) + dsb(); + + if (tlb_flag(TLB_V3_FULL)) + asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL)) + asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL)) + asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL)) + asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | + TLB_V6_I_ASID | TLB_V6_D_ASID)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + isb(); + } +} + +static inline void local_flush_tlb_mm(struct mm_struct *mm) +{ + const int zero = 0; + const int asid = ASID(mm); + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_WB)) + dsb(); + + if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) { + if (tlb_flag(TLB_V3_FULL)) + asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V4_U_FULL)) + asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V4_D_FULL)) + asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V4_I_FULL)) + asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); + } + + if (tlb_flag(TLB_V6_U_ASID)) + asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc"); + if (tlb_flag(TLB_V6_D_ASID)) + asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc"); + if (tlb_flag(TLB_V6_I_ASID)) + asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc"); + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | + TLB_V6_I_ASID | TLB_V6_D_ASID)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + } +} + +static inline void +local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +{ + const int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + + uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm); + + if (tlb_flag(TLB_WB)) + dsb(); + + if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { + if (tlb_flag(TLB_V3_PAGE)) + asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc"); + if (tlb_flag(TLB_V4_U_PAGE)) + asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc"); + if (tlb_flag(TLB_V4_D_PAGE)) + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); + if (tlb_flag(TLB_V4_I_PAGE)) + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); + if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL)) + asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); + } + + if (tlb_flag(TLB_V6_U_PAGE)) + asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc"); + if (tlb_flag(TLB_V6_D_PAGE)) + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); + if (tlb_flag(TLB_V6_I_PAGE)) + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | + TLB_V6_I_ASID | TLB_V6_D_ASID)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + } +} + +static inline void local_flush_tlb_kernel_page(unsigned long kaddr) +{ + const int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + + kaddr &= PAGE_MASK; + + if (tlb_flag(TLB_WB)) + dsb(); + + if (tlb_flag(TLB_V3_PAGE)) + asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V4_U_PAGE)) + asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V4_D_PAGE)) + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V4_I_PAGE)) + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); + if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL)) + asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); + + if (tlb_flag(TLB_V6_U_PAGE)) + asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V6_D_PAGE)) + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V6_I_PAGE)) + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | + TLB_V6_I_ASID | TLB_V6_D_ASID)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + isb(); + } +} + +/* + * flush_pmd_entry + * + * Flush a PMD entry (word aligned, or double-word aligned) to + * RAM if the TLB for the CPU we are running on requires this. + * This is typically used when we are creating PMD entries. + * + * clean_pmd_entry + * + * Clean (but don't drain the write buffer) if the CPU requires + * these operations. This is typically used when we are removing + * PMD entries. + */ +static inline void flush_pmd_entry(pmd_t *pmd) +{ + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_DCLEAN)) + asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" + : : "r" (pmd) : "cc"); + + if (tlb_flag(TLB_L2CLEAN_FR)) + asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd" + : : "r" (pmd) : "cc"); + + if (tlb_flag(TLB_WB)) + dsb(); +} + +static inline void clean_pmd_entry(pmd_t *pmd) +{ + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_DCLEAN)) + asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" + : : "r" (pmd) : "cc"); + + if (tlb_flag(TLB_L2CLEAN_FR)) + asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd" + : : "r" (pmd) : "cc"); +} + +#undef tlb_flag +#undef always_tlb_flags +#undef possible_tlb_flags + +/* + * Convert calls to our calling convention. + */ +#define local_flush_tlb_range(vma,start,end) __cpu_flush_user_tlb_range(start,end,vma) +#define local_flush_tlb_kernel_range(s,e) __cpu_flush_kern_tlb_range(s,e) + +#ifndef CONFIG_SMP +#define flush_tlb_all local_flush_tlb_all +#define flush_tlb_mm local_flush_tlb_mm +#define flush_tlb_page local_flush_tlb_page +#define flush_tlb_kernel_page local_flush_tlb_kernel_page +#define flush_tlb_range local_flush_tlb_range +#define flush_tlb_kernel_range local_flush_tlb_kernel_range +#else +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr); +extern void flush_tlb_kernel_page(unsigned long kaddr); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); +#endif + +/* + * if PG_dcache_dirty is set for the page, we need to ensure that any + * cache entries for the kernels virtual memory range are written + * back to the page. + */ +extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte); + +#endif + +#endif /* CONFIG_MMU */ + +#endif diff --git a/include/asm-arm/topology.h b/arch/arm/include/asm/topology.h similarity index 100% rename from include/asm-arm/topology.h rename to arch/arm/include/asm/topology.h diff --git a/include/asm-arm/traps.h b/arch/arm/include/asm/traps.h similarity index 93% rename from include/asm-arm/traps.h rename to arch/arm/include/asm/traps.h index f1541afcf85c200c457fb48fc93d5c88d250902d..aa399aec568ef02533c2d6694f192f91a8446ab5 100644 --- a/include/asm-arm/traps.h +++ b/arch/arm/include/asm/traps.h @@ -24,4 +24,6 @@ static inline int in_exception_text(unsigned long ptr) ptr < (unsigned long)&__exception_text_end; } +extern void __init early_trap_init(void); + #endif diff --git a/include/asm-arm/types.h b/arch/arm/include/asm/types.h similarity index 100% rename from include/asm-arm/types.h rename to arch/arm/include/asm/types.h diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h new file mode 100644 index 0000000000000000000000000000000000000000..d0f51ff900b5d029e278b9b9480c6b90cd6226b7 --- /dev/null +++ b/arch/arm/include/asm/uaccess.h @@ -0,0 +1,444 @@ +/* + * arch/arm/include/asm/uaccess.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_UACCESS_H +#define _ASMARM_UACCESS_H + +/* + * User space memory access functions + */ +#include +#include +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +extern int fixup_exception(struct pt_regs *regs); + +/* + * These two are intentionally not defined anywhere - if the kernel + * code generates any references to them, that's a bug. + */ +extern int __get_user_bad(void); +extern int __put_user_bad(void); + +/* + * Note that this is actually 0x1,0000,0000 + */ +#define KERNEL_DS 0x00000000 +#define get_ds() (KERNEL_DS) + +#ifdef CONFIG_MMU + +#define USER_DS TASK_SIZE +#define get_fs() (current_thread_info()->addr_limit) + +static inline void set_fs(mm_segment_t fs) +{ + current_thread_info()->addr_limit = fs; + modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER); +} + +#define segment_eq(a,b) ((a) == (b)) + +#define __addr_ok(addr) ({ \ + unsigned long flag; \ + __asm__("cmp %2, %0; movlo %0, #0" \ + : "=&r" (flag) \ + : "0" (current_thread_info()->addr_limit), "r" (addr) \ + : "cc"); \ + (flag == 0); }) + +/* We use 33-bit arithmetic here... */ +#define __range_ok(addr,size) ({ \ + unsigned long flag, roksum; \ + __chk_user_ptr(addr); \ + __asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \ + : "=&r" (flag), "=&r" (roksum) \ + : "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \ + : "cc"); \ + flag; }) + +/* + * Single-value transfer routines. They automatically use the right + * size if we just have the right pointer type. Note that the functions + * which read from user space (*get_*) need to take care not to leak + * kernel data even if the calling code is buggy and fails to check + * the return value. This means zeroing out the destination variable + * or buffer on error. Normally this is done out of line by the + * fixup code, but there are a few places where it intrudes on the + * main code path. When we only write to user space, there is no + * problem. + */ +extern int __get_user_1(void *); +extern int __get_user_2(void *); +extern int __get_user_4(void *); + +#define __get_user_x(__r2,__p,__e,__s,__i...) \ + __asm__ __volatile__ ( \ + __asmeq("%0", "r0") __asmeq("%1", "r2") \ + "bl __get_user_" #__s \ + : "=&r" (__e), "=r" (__r2) \ + : "0" (__p) \ + : __i, "cc") + +#define get_user(x,p) \ + ({ \ + register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register unsigned long __r2 asm("r2"); \ + register int __e asm("r0"); \ + switch (sizeof(*(__p))) { \ + case 1: \ + __get_user_x(__r2, __p, __e, 1, "lr"); \ + break; \ + case 2: \ + __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ + break; \ + case 4: \ + __get_user_x(__r2, __p, __e, 4, "lr"); \ + break; \ + default: __e = __get_user_bad(); break; \ + } \ + x = (typeof(*(p))) __r2; \ + __e; \ + }) + +extern int __put_user_1(void *, unsigned int); +extern int __put_user_2(void *, unsigned int); +extern int __put_user_4(void *, unsigned int); +extern int __put_user_8(void *, unsigned long long); + +#define __put_user_x(__r2,__p,__e,__s) \ + __asm__ __volatile__ ( \ + __asmeq("%0", "r0") __asmeq("%2", "r2") \ + "bl __put_user_" #__s \ + : "=&r" (__e) \ + : "0" (__p), "r" (__r2) \ + : "ip", "lr", "cc") + +#define put_user(x,p) \ + ({ \ + register const typeof(*(p)) __r2 asm("r2") = (x); \ + register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register int __e asm("r0"); \ + switch (sizeof(*(__p))) { \ + case 1: \ + __put_user_x(__r2, __p, __e, 1); \ + break; \ + case 2: \ + __put_user_x(__r2, __p, __e, 2); \ + break; \ + case 4: \ + __put_user_x(__r2, __p, __e, 4); \ + break; \ + case 8: \ + __put_user_x(__r2, __p, __e, 8); \ + break; \ + default: __e = __put_user_bad(); break; \ + } \ + __e; \ + }) + +#else /* CONFIG_MMU */ + +/* + * uClinux has only one addr space, so has simplified address limits. + */ +#define USER_DS KERNEL_DS + +#define segment_eq(a,b) (1) +#define __addr_ok(addr) (1) +#define __range_ok(addr,size) (0) +#define get_fs() (KERNEL_DS) + +static inline void set_fs(mm_segment_t fs) +{ +} + +#define get_user(x,p) __get_user(x,p) +#define put_user(x,p) __put_user(x,p) + +#endif /* CONFIG_MMU */ + +#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) + +/* + * The "__xxx" versions of the user access functions do not verify the + * address space - it must have been done previously with a separate + * "access_ok()" call. + * + * The "xxx_error" versions set the third argument to EFAULT if an + * error occurs, and leave it unchanged on success. Note that these + * versions are void (ie, don't return a value as such). + */ +#define __get_user(x,ptr) \ +({ \ + long __gu_err = 0; \ + __get_user_err((x),(ptr),__gu_err); \ + __gu_err; \ +}) + +#define __get_user_error(x,ptr,err) \ +({ \ + __get_user_err((x),(ptr),err); \ + (void) 0; \ +}) + +#define __get_user_err(x,ptr,err) \ +do { \ + unsigned long __gu_addr = (unsigned long)(ptr); \ + unsigned long __gu_val; \ + __chk_user_ptr(ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ + case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ + case 4: __get_user_asm_word(__gu_val,__gu_addr,err); break; \ + default: (__gu_val) = __get_user_bad(); \ + } \ + (x) = (__typeof__(*(ptr)))__gu_val; \ +} while (0) + +#define __get_user_asm_byte(x,addr,err) \ + __asm__ __volatile__( \ + "1: ldrbt %1,[%2],#0\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 2\n" \ + "3: mov %0, %3\n" \ + " mov %1, #0\n" \ + " b 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 3\n" \ + " .long 1b, 3b\n" \ + " .previous" \ + : "+r" (err), "=&r" (x) \ + : "r" (addr), "i" (-EFAULT) \ + : "cc") + +#ifndef __ARMEB__ +#define __get_user_asm_half(x,__gu_addr,err) \ +({ \ + unsigned long __b1, __b2; \ + __get_user_asm_byte(__b1, __gu_addr, err); \ + __get_user_asm_byte(__b2, __gu_addr + 1, err); \ + (x) = __b1 | (__b2 << 8); \ +}) +#else +#define __get_user_asm_half(x,__gu_addr,err) \ +({ \ + unsigned long __b1, __b2; \ + __get_user_asm_byte(__b1, __gu_addr, err); \ + __get_user_asm_byte(__b2, __gu_addr + 1, err); \ + (x) = (__b1 << 8) | __b2; \ +}) +#endif + +#define __get_user_asm_word(x,addr,err) \ + __asm__ __volatile__( \ + "1: ldrt %1,[%2],#0\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 2\n" \ + "3: mov %0, %3\n" \ + " mov %1, #0\n" \ + " b 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 3\n" \ + " .long 1b, 3b\n" \ + " .previous" \ + : "+r" (err), "=&r" (x) \ + : "r" (addr), "i" (-EFAULT) \ + : "cc") + +#define __put_user(x,ptr) \ +({ \ + long __pu_err = 0; \ + __put_user_err((x),(ptr),__pu_err); \ + __pu_err; \ +}) + +#define __put_user_error(x,ptr,err) \ +({ \ + __put_user_err((x),(ptr),err); \ + (void) 0; \ +}) + +#define __put_user_err(x,ptr,err) \ +do { \ + unsigned long __pu_addr = (unsigned long)(ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + __chk_user_ptr(ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ + case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ + case 4: __put_user_asm_word(__pu_val,__pu_addr,err); break; \ + case 8: __put_user_asm_dword(__pu_val,__pu_addr,err); break; \ + default: __put_user_bad(); \ + } \ +} while (0) + +#define __put_user_asm_byte(x,__pu_addr,err) \ + __asm__ __volatile__( \ + "1: strbt %1,[%2],#0\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 2\n" \ + "3: mov %0, %3\n" \ + " b 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 3\n" \ + " .long 1b, 3b\n" \ + " .previous" \ + : "+r" (err) \ + : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ + : "cc") + +#ifndef __ARMEB__ +#define __put_user_asm_half(x,__pu_addr,err) \ +({ \ + unsigned long __temp = (unsigned long)(x); \ + __put_user_asm_byte(__temp, __pu_addr, err); \ + __put_user_asm_byte(__temp >> 8, __pu_addr + 1, err); \ +}) +#else +#define __put_user_asm_half(x,__pu_addr,err) \ +({ \ + unsigned long __temp = (unsigned long)(x); \ + __put_user_asm_byte(__temp >> 8, __pu_addr, err); \ + __put_user_asm_byte(__temp, __pu_addr + 1, err); \ +}) +#endif + +#define __put_user_asm_word(x,__pu_addr,err) \ + __asm__ __volatile__( \ + "1: strt %1,[%2],#0\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 2\n" \ + "3: mov %0, %3\n" \ + " b 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 3\n" \ + " .long 1b, 3b\n" \ + " .previous" \ + : "+r" (err) \ + : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ + : "cc") + +#ifndef __ARMEB__ +#define __reg_oper0 "%R2" +#define __reg_oper1 "%Q2" +#else +#define __reg_oper0 "%Q2" +#define __reg_oper1 "%R2" +#endif + +#define __put_user_asm_dword(x,__pu_addr,err) \ + __asm__ __volatile__( \ + "1: strt " __reg_oper1 ", [%1], #4\n" \ + "2: strt " __reg_oper0 ", [%1], #0\n" \ + "3:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 2\n" \ + "4: mov %0, %3\n" \ + " b 3b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 3\n" \ + " .long 1b, 4b\n" \ + " .long 2b, 4b\n" \ + " .previous" \ + : "+r" (err), "+r" (__pu_addr) \ + : "r" (x), "i" (-EFAULT) \ + : "cc") + + +#ifdef CONFIG_MMU +extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n); +extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n); +extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n); +#else +#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0) +#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0) +#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0) +#endif + +extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count); +extern unsigned long __must_check __strnlen_user(const char __user *s, long n); + +static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n) +{ + if (access_ok(VERIFY_READ, from, n)) + n = __copy_from_user(to, from, n); + else /* security hole - plug it */ + memzero(to, n); + return n; +} + +static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n) +{ + if (access_ok(VERIFY_WRITE, to, n)) + n = __copy_to_user(to, from, n); + return n; +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +static inline unsigned long __must_check clear_user(void __user *to, unsigned long n) +{ + if (access_ok(VERIFY_WRITE, to, n)) + n = __clear_user(to, n); + return n; +} + +static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count) +{ + long res = -EFAULT; + if (access_ok(VERIFY_READ, src, 1)) + res = __strncpy_from_user(dst, src, count); + return res; +} + +#define strlen_user(s) strnlen_user(s, ~0UL >> 1) + +static inline long __must_check strnlen_user(const char __user *s, long n) +{ + unsigned long res = 0; + + if (__addr_ok(s)) + res = __strnlen_user(s, n); + + return res; +} + +#endif /* _ASMARM_UACCESS_H */ diff --git a/include/asm-arm/ucontext.h b/arch/arm/include/asm/ucontext.h similarity index 100% rename from include/asm-arm/ucontext.h rename to arch/arm/include/asm/ucontext.h diff --git a/include/asm-arm/unaligned.h b/arch/arm/include/asm/unaligned.h similarity index 100% rename from include/asm-arm/unaligned.h rename to arch/arm/include/asm/unaligned.h diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h new file mode 100644 index 0000000000000000000000000000000000000000..f95fbb2fcb5ffc2a59e1b032b89f50534be8971a --- /dev/null +++ b/arch/arm/include/asm/unistd.h @@ -0,0 +1,450 @@ +/* + * arch/arm/include/asm/unistd.h + * + * Copyright (C) 2001-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Please forward _all_ changes to this file to rmk@arm.linux.org.uk, + * no matter what the change is. Thanks! + */ +#ifndef __ASM_ARM_UNISTD_H +#define __ASM_ARM_UNISTD_H + +#define __NR_OABI_SYSCALL_BASE 0x900000 + +#if defined(__thumb__) || defined(__ARM_EABI__) +#define __NR_SYSCALL_BASE 0 +#else +#define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE +#endif + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) +#define __NR_exit (__NR_SYSCALL_BASE+ 1) +#define __NR_fork (__NR_SYSCALL_BASE+ 2) +#define __NR_read (__NR_SYSCALL_BASE+ 3) +#define __NR_write (__NR_SYSCALL_BASE+ 4) +#define __NR_open (__NR_SYSCALL_BASE+ 5) +#define __NR_close (__NR_SYSCALL_BASE+ 6) + /* 7 was sys_waitpid */ +#define __NR_creat (__NR_SYSCALL_BASE+ 8) +#define __NR_link (__NR_SYSCALL_BASE+ 9) +#define __NR_unlink (__NR_SYSCALL_BASE+ 10) +#define __NR_execve (__NR_SYSCALL_BASE+ 11) +#define __NR_chdir (__NR_SYSCALL_BASE+ 12) +#define __NR_time (__NR_SYSCALL_BASE+ 13) +#define __NR_mknod (__NR_SYSCALL_BASE+ 14) +#define __NR_chmod (__NR_SYSCALL_BASE+ 15) +#define __NR_lchown (__NR_SYSCALL_BASE+ 16) + /* 17 was sys_break */ + /* 18 was sys_stat */ +#define __NR_lseek (__NR_SYSCALL_BASE+ 19) +#define __NR_getpid (__NR_SYSCALL_BASE+ 20) +#define __NR_mount (__NR_SYSCALL_BASE+ 21) +#define __NR_umount (__NR_SYSCALL_BASE+ 22) +#define __NR_setuid (__NR_SYSCALL_BASE+ 23) +#define __NR_getuid (__NR_SYSCALL_BASE+ 24) +#define __NR_stime (__NR_SYSCALL_BASE+ 25) +#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) +#define __NR_alarm (__NR_SYSCALL_BASE+ 27) + /* 28 was sys_fstat */ +#define __NR_pause (__NR_SYSCALL_BASE+ 29) +#define __NR_utime (__NR_SYSCALL_BASE+ 30) + /* 31 was sys_stty */ + /* 32 was sys_gtty */ +#define __NR_access (__NR_SYSCALL_BASE+ 33) +#define __NR_nice (__NR_SYSCALL_BASE+ 34) + /* 35 was sys_ftime */ +#define __NR_sync (__NR_SYSCALL_BASE+ 36) +#define __NR_kill (__NR_SYSCALL_BASE+ 37) +#define __NR_rename (__NR_SYSCALL_BASE+ 38) +#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) +#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) +#define __NR_dup (__NR_SYSCALL_BASE+ 41) +#define __NR_pipe (__NR_SYSCALL_BASE+ 42) +#define __NR_times (__NR_SYSCALL_BASE+ 43) + /* 44 was sys_prof */ +#define __NR_brk (__NR_SYSCALL_BASE+ 45) +#define __NR_setgid (__NR_SYSCALL_BASE+ 46) +#define __NR_getgid (__NR_SYSCALL_BASE+ 47) + /* 48 was sys_signal */ +#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) +#define __NR_getegid (__NR_SYSCALL_BASE+ 50) +#define __NR_acct (__NR_SYSCALL_BASE+ 51) +#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) + /* 53 was sys_lock */ +#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) +#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) + /* 56 was sys_mpx */ +#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) + /* 58 was sys_ulimit */ + /* 59 was sys_olduname */ +#define __NR_umask (__NR_SYSCALL_BASE+ 60) +#define __NR_chroot (__NR_SYSCALL_BASE+ 61) +#define __NR_ustat (__NR_SYSCALL_BASE+ 62) +#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) +#define __NR_getppid (__NR_SYSCALL_BASE+ 64) +#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) +#define __NR_setsid (__NR_SYSCALL_BASE+ 66) +#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) + /* 68 was sys_sgetmask */ + /* 69 was sys_ssetmask */ +#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) +#define __NR_setregid (__NR_SYSCALL_BASE+ 71) +#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) +#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) +#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) +#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) +#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ +#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) +#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) +#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) +#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) +#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) +#define __NR_select (__NR_SYSCALL_BASE+ 82) +#define __NR_symlink (__NR_SYSCALL_BASE+ 83) + /* 84 was sys_lstat */ +#define __NR_readlink (__NR_SYSCALL_BASE+ 85) +#define __NR_uselib (__NR_SYSCALL_BASE+ 86) +#define __NR_swapon (__NR_SYSCALL_BASE+ 87) +#define __NR_reboot (__NR_SYSCALL_BASE+ 88) +#define __NR_readdir (__NR_SYSCALL_BASE+ 89) +#define __NR_mmap (__NR_SYSCALL_BASE+ 90) +#define __NR_munmap (__NR_SYSCALL_BASE+ 91) +#define __NR_truncate (__NR_SYSCALL_BASE+ 92) +#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) +#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) +#define __NR_fchown (__NR_SYSCALL_BASE+ 95) +#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) +#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) + /* 98 was sys_profil */ +#define __NR_statfs (__NR_SYSCALL_BASE+ 99) +#define __NR_fstatfs (__NR_SYSCALL_BASE+100) + /* 101 was sys_ioperm */ +#define __NR_socketcall (__NR_SYSCALL_BASE+102) +#define __NR_syslog (__NR_SYSCALL_BASE+103) +#define __NR_setitimer (__NR_SYSCALL_BASE+104) +#define __NR_getitimer (__NR_SYSCALL_BASE+105) +#define __NR_stat (__NR_SYSCALL_BASE+106) +#define __NR_lstat (__NR_SYSCALL_BASE+107) +#define __NR_fstat (__NR_SYSCALL_BASE+108) + /* 109 was sys_uname */ + /* 110 was sys_iopl */ +#define __NR_vhangup (__NR_SYSCALL_BASE+111) + /* 112 was sys_idle */ +#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ +#define __NR_wait4 (__NR_SYSCALL_BASE+114) +#define __NR_swapoff (__NR_SYSCALL_BASE+115) +#define __NR_sysinfo (__NR_SYSCALL_BASE+116) +#define __NR_ipc (__NR_SYSCALL_BASE+117) +#define __NR_fsync (__NR_SYSCALL_BASE+118) +#define __NR_sigreturn (__NR_SYSCALL_BASE+119) +#define __NR_clone (__NR_SYSCALL_BASE+120) +#define __NR_setdomainname (__NR_SYSCALL_BASE+121) +#define __NR_uname (__NR_SYSCALL_BASE+122) + /* 123 was sys_modify_ldt */ +#define __NR_adjtimex (__NR_SYSCALL_BASE+124) +#define __NR_mprotect (__NR_SYSCALL_BASE+125) +#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) + /* 127 was sys_create_module */ +#define __NR_init_module (__NR_SYSCALL_BASE+128) +#define __NR_delete_module (__NR_SYSCALL_BASE+129) + /* 130 was sys_get_kernel_syms */ +#define __NR_quotactl (__NR_SYSCALL_BASE+131) +#define __NR_getpgid (__NR_SYSCALL_BASE+132) +#define __NR_fchdir (__NR_SYSCALL_BASE+133) +#define __NR_bdflush (__NR_SYSCALL_BASE+134) +#define __NR_sysfs (__NR_SYSCALL_BASE+135) +#define __NR_personality (__NR_SYSCALL_BASE+136) + /* 137 was sys_afs_syscall */ +#define __NR_setfsuid (__NR_SYSCALL_BASE+138) +#define __NR_setfsgid (__NR_SYSCALL_BASE+139) +#define __NR__llseek (__NR_SYSCALL_BASE+140) +#define __NR_getdents (__NR_SYSCALL_BASE+141) +#define __NR__newselect (__NR_SYSCALL_BASE+142) +#define __NR_flock (__NR_SYSCALL_BASE+143) +#define __NR_msync (__NR_SYSCALL_BASE+144) +#define __NR_readv (__NR_SYSCALL_BASE+145) +#define __NR_writev (__NR_SYSCALL_BASE+146) +#define __NR_getsid (__NR_SYSCALL_BASE+147) +#define __NR_fdatasync (__NR_SYSCALL_BASE+148) +#define __NR__sysctl (__NR_SYSCALL_BASE+149) +#define __NR_mlock (__NR_SYSCALL_BASE+150) +#define __NR_munlock (__NR_SYSCALL_BASE+151) +#define __NR_mlockall (__NR_SYSCALL_BASE+152) +#define __NR_munlockall (__NR_SYSCALL_BASE+153) +#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) +#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) +#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) +#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) +#define __NR_sched_yield (__NR_SYSCALL_BASE+158) +#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) +#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) +#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) +#define __NR_nanosleep (__NR_SYSCALL_BASE+162) +#define __NR_mremap (__NR_SYSCALL_BASE+163) +#define __NR_setresuid (__NR_SYSCALL_BASE+164) +#define __NR_getresuid (__NR_SYSCALL_BASE+165) + /* 166 was sys_vm86 */ + /* 167 was sys_query_module */ +#define __NR_poll (__NR_SYSCALL_BASE+168) +#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) +#define __NR_setresgid (__NR_SYSCALL_BASE+170) +#define __NR_getresgid (__NR_SYSCALL_BASE+171) +#define __NR_prctl (__NR_SYSCALL_BASE+172) +#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) +#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) +#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) +#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) +#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) +#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) +#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) +#define __NR_pread64 (__NR_SYSCALL_BASE+180) +#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) +#define __NR_chown (__NR_SYSCALL_BASE+182) +#define __NR_getcwd (__NR_SYSCALL_BASE+183) +#define __NR_capget (__NR_SYSCALL_BASE+184) +#define __NR_capset (__NR_SYSCALL_BASE+185) +#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) +#define __NR_sendfile (__NR_SYSCALL_BASE+187) + /* 188 reserved */ + /* 189 reserved */ +#define __NR_vfork (__NR_SYSCALL_BASE+190) +#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ +#define __NR_mmap2 (__NR_SYSCALL_BASE+192) +#define __NR_truncate64 (__NR_SYSCALL_BASE+193) +#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) +#define __NR_stat64 (__NR_SYSCALL_BASE+195) +#define __NR_lstat64 (__NR_SYSCALL_BASE+196) +#define __NR_fstat64 (__NR_SYSCALL_BASE+197) +#define __NR_lchown32 (__NR_SYSCALL_BASE+198) +#define __NR_getuid32 (__NR_SYSCALL_BASE+199) +#define __NR_getgid32 (__NR_SYSCALL_BASE+200) +#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) +#define __NR_getegid32 (__NR_SYSCALL_BASE+202) +#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) +#define __NR_setregid32 (__NR_SYSCALL_BASE+204) +#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) +#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) +#define __NR_fchown32 (__NR_SYSCALL_BASE+207) +#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) +#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) +#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) +#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) +#define __NR_chown32 (__NR_SYSCALL_BASE+212) +#define __NR_setuid32 (__NR_SYSCALL_BASE+213) +#define __NR_setgid32 (__NR_SYSCALL_BASE+214) +#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) +#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) +#define __NR_getdents64 (__NR_SYSCALL_BASE+217) +#define __NR_pivot_root (__NR_SYSCALL_BASE+218) +#define __NR_mincore (__NR_SYSCALL_BASE+219) +#define __NR_madvise (__NR_SYSCALL_BASE+220) +#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) + /* 222 for tux */ + /* 223 is unused */ +#define __NR_gettid (__NR_SYSCALL_BASE+224) +#define __NR_readahead (__NR_SYSCALL_BASE+225) +#define __NR_setxattr (__NR_SYSCALL_BASE+226) +#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) +#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) +#define __NR_getxattr (__NR_SYSCALL_BASE+229) +#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) +#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) +#define __NR_listxattr (__NR_SYSCALL_BASE+232) +#define __NR_llistxattr (__NR_SYSCALL_BASE+233) +#define __NR_flistxattr (__NR_SYSCALL_BASE+234) +#define __NR_removexattr (__NR_SYSCALL_BASE+235) +#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) +#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) +#define __NR_tkill (__NR_SYSCALL_BASE+238) +#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) +#define __NR_futex (__NR_SYSCALL_BASE+240) +#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) +#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) +#define __NR_io_setup (__NR_SYSCALL_BASE+243) +#define __NR_io_destroy (__NR_SYSCALL_BASE+244) +#define __NR_io_getevents (__NR_SYSCALL_BASE+245) +#define __NR_io_submit (__NR_SYSCALL_BASE+246) +#define __NR_io_cancel (__NR_SYSCALL_BASE+247) +#define __NR_exit_group (__NR_SYSCALL_BASE+248) +#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) +#define __NR_epoll_create (__NR_SYSCALL_BASE+250) +#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) +#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) +#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) + /* 254 for set_thread_area */ + /* 255 for get_thread_area */ +#define __NR_set_tid_address (__NR_SYSCALL_BASE+256) +#define __NR_timer_create (__NR_SYSCALL_BASE+257) +#define __NR_timer_settime (__NR_SYSCALL_BASE+258) +#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) +#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) +#define __NR_timer_delete (__NR_SYSCALL_BASE+261) +#define __NR_clock_settime (__NR_SYSCALL_BASE+262) +#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) +#define __NR_clock_getres (__NR_SYSCALL_BASE+264) +#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) +#define __NR_statfs64 (__NR_SYSCALL_BASE+266) +#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) +#define __NR_tgkill (__NR_SYSCALL_BASE+268) +#define __NR_utimes (__NR_SYSCALL_BASE+269) +#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) +#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) +#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) +#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) +#define __NR_mq_open (__NR_SYSCALL_BASE+274) +#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) +#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) +#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) +#define __NR_mq_notify (__NR_SYSCALL_BASE+278) +#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) +#define __NR_waitid (__NR_SYSCALL_BASE+280) +#define __NR_socket (__NR_SYSCALL_BASE+281) +#define __NR_bind (__NR_SYSCALL_BASE+282) +#define __NR_connect (__NR_SYSCALL_BASE+283) +#define __NR_listen (__NR_SYSCALL_BASE+284) +#define __NR_accept (__NR_SYSCALL_BASE+285) +#define __NR_getsockname (__NR_SYSCALL_BASE+286) +#define __NR_getpeername (__NR_SYSCALL_BASE+287) +#define __NR_socketpair (__NR_SYSCALL_BASE+288) +#define __NR_send (__NR_SYSCALL_BASE+289) +#define __NR_sendto (__NR_SYSCALL_BASE+290) +#define __NR_recv (__NR_SYSCALL_BASE+291) +#define __NR_recvfrom (__NR_SYSCALL_BASE+292) +#define __NR_shutdown (__NR_SYSCALL_BASE+293) +#define __NR_setsockopt (__NR_SYSCALL_BASE+294) +#define __NR_getsockopt (__NR_SYSCALL_BASE+295) +#define __NR_sendmsg (__NR_SYSCALL_BASE+296) +#define __NR_recvmsg (__NR_SYSCALL_BASE+297) +#define __NR_semop (__NR_SYSCALL_BASE+298) +#define __NR_semget (__NR_SYSCALL_BASE+299) +#define __NR_semctl (__NR_SYSCALL_BASE+300) +#define __NR_msgsnd (__NR_SYSCALL_BASE+301) +#define __NR_msgrcv (__NR_SYSCALL_BASE+302) +#define __NR_msgget (__NR_SYSCALL_BASE+303) +#define __NR_msgctl (__NR_SYSCALL_BASE+304) +#define __NR_shmat (__NR_SYSCALL_BASE+305) +#define __NR_shmdt (__NR_SYSCALL_BASE+306) +#define __NR_shmget (__NR_SYSCALL_BASE+307) +#define __NR_shmctl (__NR_SYSCALL_BASE+308) +#define __NR_add_key (__NR_SYSCALL_BASE+309) +#define __NR_request_key (__NR_SYSCALL_BASE+310) +#define __NR_keyctl (__NR_SYSCALL_BASE+311) +#define __NR_semtimedop (__NR_SYSCALL_BASE+312) +#define __NR_vserver (__NR_SYSCALL_BASE+313) +#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) +#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) +#define __NR_inotify_init (__NR_SYSCALL_BASE+316) +#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) +#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) +#define __NR_mbind (__NR_SYSCALL_BASE+319) +#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) +#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) +#define __NR_openat (__NR_SYSCALL_BASE+322) +#define __NR_mkdirat (__NR_SYSCALL_BASE+323) +#define __NR_mknodat (__NR_SYSCALL_BASE+324) +#define __NR_fchownat (__NR_SYSCALL_BASE+325) +#define __NR_futimesat (__NR_SYSCALL_BASE+326) +#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) +#define __NR_unlinkat (__NR_SYSCALL_BASE+328) +#define __NR_renameat (__NR_SYSCALL_BASE+329) +#define __NR_linkat (__NR_SYSCALL_BASE+330) +#define __NR_symlinkat (__NR_SYSCALL_BASE+331) +#define __NR_readlinkat (__NR_SYSCALL_BASE+332) +#define __NR_fchmodat (__NR_SYSCALL_BASE+333) +#define __NR_faccessat (__NR_SYSCALL_BASE+334) + /* 335 for pselect6 */ + /* 336 for ppoll */ +#define __NR_unshare (__NR_SYSCALL_BASE+337) +#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) +#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) +#define __NR_splice (__NR_SYSCALL_BASE+340) +#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) +#define __NR_sync_file_range2 __NR_arm_sync_file_range +#define __NR_tee (__NR_SYSCALL_BASE+342) +#define __NR_vmsplice (__NR_SYSCALL_BASE+343) +#define __NR_move_pages (__NR_SYSCALL_BASE+344) +#define __NR_getcpu (__NR_SYSCALL_BASE+345) + /* 346 for epoll_pwait */ +#define __NR_kexec_load (__NR_SYSCALL_BASE+347) +#define __NR_utimensat (__NR_SYSCALL_BASE+348) +#define __NR_signalfd (__NR_SYSCALL_BASE+349) +#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) +#define __NR_eventfd (__NR_SYSCALL_BASE+351) +#define __NR_fallocate (__NR_SYSCALL_BASE+352) +#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) +#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) + +/* + * The following SWIs are ARM private. + */ +#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000) +#define __ARM_NR_breakpoint (__ARM_NR_BASE+1) +#define __ARM_NR_cacheflush (__ARM_NR_BASE+2) +#define __ARM_NR_usr26 (__ARM_NR_BASE+3) +#define __ARM_NR_usr32 (__ARM_NR_BASE+4) +#define __ARM_NR_set_tls (__ARM_NR_BASE+5) + +/* + * The following syscalls are obsolete and no longer available for EABI. + */ +#if defined(__ARM_EABI__) && !defined(__KERNEL__) +#undef __NR_time +#undef __NR_umount +#undef __NR_stime +#undef __NR_alarm +#undef __NR_utime +#undef __NR_getrlimit +#undef __NR_select +#undef __NR_readdir +#undef __NR_mmap +#undef __NR_socketcall +#undef __NR_syscall +#undef __NR_ipc +#endif + +#ifdef __KERNEL__ + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION + +#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT) +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_SYS_SOCKETCALL +#endif + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") + +/* + * Unimplemented (or alternatively implemented) syscalls + */ +#define __IGNORE_fadvise64_64 1 + +#endif /* __KERNEL__ */ +#endif /* __ASM_ARM_UNISTD_H */ diff --git a/include/asm-arm/user.h b/arch/arm/include/asm/user.h similarity index 100% rename from include/asm-arm/user.h rename to arch/arm/include/asm/user.h diff --git a/include/asm-arm/vfp.h b/arch/arm/include/asm/vfp.h similarity index 98% rename from include/asm-arm/vfp.h rename to arch/arm/include/asm/vfp.h index 5f9a2cb3d452fb4d1e42a1d43dc95439286f5e8c..f4ab34fd4f72cc70ce0ece49eef7187f97e33763 100644 --- a/include/asm-arm/vfp.h +++ b/arch/arm/include/asm/vfp.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/vfp.h + * arch/arm/include/asm/vfp.h * * VFP register definitions. * First, the standard VFP set. diff --git a/include/asm-arm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h similarity index 97% rename from include/asm-arm/vfpmacros.h rename to arch/arm/include/asm/vfpmacros.h index cccb3892e73c0c24a097f264f0dfd24dc7186771..422f3cc204a27310f99d9b25adebb9f49d16e3d0 100644 --- a/include/asm-arm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/vfpmacros.h + * arch/arm/include/asm/vfpmacros.h * * Assembler-only file containing VFP macros and register definitions. */ diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h new file mode 100644 index 0000000000000000000000000000000000000000..6a3cd2a2f6700d386a5cc82921eb9e6b6f76258e --- /dev/null +++ b/arch/arm/include/asm/vga.h @@ -0,0 +1,12 @@ +#ifndef ASMARM_VGA_H +#define ASMARM_VGA_H + +#include +#include + +#define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x)) + +#define vga_readb(x) (*((volatile unsigned char *)x)) +#define vga_writeb(x,y) (*((volatile unsigned char *)y) = (x)) + +#endif diff --git a/arch/arm/include/asm/xor.h b/arch/arm/include/asm/xor.h new file mode 100644 index 0000000000000000000000000000000000000000..7604673dc4278609b4f7ba68985d8b996b49ec47 --- /dev/null +++ b/arch/arm/include/asm/xor.h @@ -0,0 +1,141 @@ +/* + * arch/arm/include/asm/xor.h + * + * Copyright (C) 2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +#define __XOR(a1, a2) a1 ^= a2 + +#define GET_BLOCK_2(dst) \ + __asm__("ldmia %0, {%1, %2}" \ + : "=r" (dst), "=r" (a1), "=r" (a2) \ + : "0" (dst)) + +#define GET_BLOCK_4(dst) \ + __asm__("ldmia %0, {%1, %2, %3, %4}" \ + : "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \ + : "0" (dst)) + +#define XOR_BLOCK_2(src) \ + __asm__("ldmia %0!, {%1, %2}" \ + : "=r" (src), "=r" (b1), "=r" (b2) \ + : "0" (src)); \ + __XOR(a1, b1); __XOR(a2, b2); + +#define XOR_BLOCK_4(src) \ + __asm__("ldmia %0!, {%1, %2, %3, %4}" \ + : "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \ + : "0" (src)); \ + __XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4) + +#define PUT_BLOCK_2(dst) \ + __asm__ __volatile__("stmia %0!, {%2, %3}" \ + : "=r" (dst) \ + : "0" (dst), "r" (a1), "r" (a2)) + +#define PUT_BLOCK_4(dst) \ + __asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}" \ + : "=r" (dst) \ + : "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4)) + +static void +xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) +{ + unsigned int lines = bytes / sizeof(unsigned long) / 4; + register unsigned int a1 __asm__("r4"); + register unsigned int a2 __asm__("r5"); + register unsigned int a3 __asm__("r6"); + register unsigned int a4 __asm__("r7"); + register unsigned int b1 __asm__("r8"); + register unsigned int b2 __asm__("r9"); + register unsigned int b3 __asm__("ip"); + register unsigned int b4 __asm__("lr"); + + do { + GET_BLOCK_4(p1); + XOR_BLOCK_4(p2); + PUT_BLOCK_4(p1); + } while (--lines); +} + +static void +xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3) +{ + unsigned int lines = bytes / sizeof(unsigned long) / 4; + register unsigned int a1 __asm__("r4"); + register unsigned int a2 __asm__("r5"); + register unsigned int a3 __asm__("r6"); + register unsigned int a4 __asm__("r7"); + register unsigned int b1 __asm__("r8"); + register unsigned int b2 __asm__("r9"); + register unsigned int b3 __asm__("ip"); + register unsigned int b4 __asm__("lr"); + + do { + GET_BLOCK_4(p1); + XOR_BLOCK_4(p2); + XOR_BLOCK_4(p3); + PUT_BLOCK_4(p1); + } while (--lines); +} + +static void +xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4) +{ + unsigned int lines = bytes / sizeof(unsigned long) / 2; + register unsigned int a1 __asm__("r8"); + register unsigned int a2 __asm__("r9"); + register unsigned int b1 __asm__("ip"); + register unsigned int b2 __asm__("lr"); + + do { + GET_BLOCK_2(p1); + XOR_BLOCK_2(p2); + XOR_BLOCK_2(p3); + XOR_BLOCK_2(p4); + PUT_BLOCK_2(p1); + } while (--lines); +} + +static void +xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4, unsigned long *p5) +{ + unsigned int lines = bytes / sizeof(unsigned long) / 2; + register unsigned int a1 __asm__("r8"); + register unsigned int a2 __asm__("r9"); + register unsigned int b1 __asm__("ip"); + register unsigned int b2 __asm__("lr"); + + do { + GET_BLOCK_2(p1); + XOR_BLOCK_2(p2); + XOR_BLOCK_2(p3); + XOR_BLOCK_2(p4); + XOR_BLOCK_2(p5); + PUT_BLOCK_2(p1); + } while (--lines); +} + +static struct xor_block_template xor_block_arm4regs = { + .name = "arm4regs", + .do_2 = xor_arm4regs_2, + .do_3 = xor_arm4regs_3, + .do_4 = xor_arm4regs_4, + .do_5 = xor_arm4regs_5, +}; + +#undef XOR_TRY_TEMPLATES +#define XOR_TRY_TEMPLATES \ + do { \ + xor_speed(&xor_block_arm4regs); \ + xor_speed(&xor_block_8regs); \ + xor_speed(&xor_block_32regs); \ + } while (0) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index eb9092ca80080cd4431951e46c6f2ce8daf70ab8..1d296fc8494e01f7f33a8cac97855506727f3e46 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o +obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 diff --git a/arch/arm/kernel/crunch-bits.S b/arch/arm/kernel/crunch-bits.S index a26886758c6737590e674c22b61515e7df9814e0..0ec9bb48fab9cd9b4ea20ab32ac9694d8d0d9881 100644 --- a/arch/arm/kernel/crunch-bits.S +++ b/arch/arm/kernel/crunch-bits.S @@ -16,7 +16,7 @@ #include #include #include -#include +#include /* * We can't use hex constants here due to a bug in gas. diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c index 627d79414c9d68212382eaefe64af6f896035509..3b6a1c293ee49cb03825a860a5edc0866133cf17 100644 --- a/arch/arm/kernel/crunch.c +++ b/arch/arm/kernel/crunch.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 5617566477b493d5cc6034a8518b8f6e696195f3..9550ff0ddde4f57393a3ccf1350c032e5115db2b 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -80,7 +80,7 @@ #endif /* CONFIG_CPU_V6 */ #else -#include +#include #endif /* CONFIG_DEBUG_ICEDCC */ /* diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index f5cfdabcb87dc8314d488dae8d864ecf4b4ca9e4..7a50575a8d4dbfe153c6d786ed5c3ba6138fa1f8 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -46,7 +46,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 7dca225752c1c49e1e77c9014bf831e3045b1ffa..617e509d60dfd1bdc148467d473e3c8596b2bb89 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include "entry-header.S" diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 84694e88b4289d07d2b952f69a1ff644ca010fb2..060d7e2e9f6408c1aaf647af4eba7b5858a8aa31 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -10,7 +10,7 @@ #include #include -#include +#include #include "entry-header.S" diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 7e9c00a8a4127ee35dad9507b109f13f319f23a3..1c3c6ea5f9e7e3bb7b7ce5a880a039489200d200 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -181,7 +181,7 @@ ENTRY(lookup_processor_type) ldmfd sp!, {r4 - r7, r9, pc} /* - * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for + * Look in and arch/arm/kernel/arch.[ch] for * more information about the __proc_info and __arch_info structures. */ .long __proc_info_begin diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 5d78ffb8a9a7fe0e653f9356d5b873896492a53c..27329bd32037a714070535ae1677e30271881ee1 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -15,7 +15,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 11dcd52e51be35e7530638dc21f7ed3f91fe8a05..f88efb135b702b2e4e9610dd9df490331df71c5c 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -38,6 +38,7 @@ #include #include +#include #include /* diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c new file mode 100644 index 0000000000000000000000000000000000000000..aaffaecffcd13699dfd0cd51d2eaf61608e4a94d --- /dev/null +++ b/arch/arm/kernel/kgdb.c @@ -0,0 +1,201 @@ +/* + * arch/arm/kernel/kgdb.c + * + * ARM KGDB support + * + * Copyright (c) 2002-2004 MontaVista Software, Inc + * Copyright (c) 2008 Wind River Systems, Inc. + * + * Authors: George Davis + * Deepak Saxena + */ +#include +#include + +/* Make a local copy of the registers passed into the handler (bletch) */ +void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs) +{ + int regno; + + /* Initialize all to zero. */ + for (regno = 0; regno < GDB_MAX_REGS; regno++) + gdb_regs[regno] = 0; + + gdb_regs[_R0] = kernel_regs->ARM_r0; + gdb_regs[_R1] = kernel_regs->ARM_r1; + gdb_regs[_R2] = kernel_regs->ARM_r2; + gdb_regs[_R3] = kernel_regs->ARM_r3; + gdb_regs[_R4] = kernel_regs->ARM_r4; + gdb_regs[_R5] = kernel_regs->ARM_r5; + gdb_regs[_R6] = kernel_regs->ARM_r6; + gdb_regs[_R7] = kernel_regs->ARM_r7; + gdb_regs[_R8] = kernel_regs->ARM_r8; + gdb_regs[_R9] = kernel_regs->ARM_r9; + gdb_regs[_R10] = kernel_regs->ARM_r10; + gdb_regs[_FP] = kernel_regs->ARM_fp; + gdb_regs[_IP] = kernel_regs->ARM_ip; + gdb_regs[_SPT] = kernel_regs->ARM_sp; + gdb_regs[_LR] = kernel_regs->ARM_lr; + gdb_regs[_PC] = kernel_regs->ARM_pc; + gdb_regs[_CPSR] = kernel_regs->ARM_cpsr; +} + +/* Copy local gdb registers back to kgdb regs, for later copy to kernel */ +void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs) +{ + kernel_regs->ARM_r0 = gdb_regs[_R0]; + kernel_regs->ARM_r1 = gdb_regs[_R1]; + kernel_regs->ARM_r2 = gdb_regs[_R2]; + kernel_regs->ARM_r3 = gdb_regs[_R3]; + kernel_regs->ARM_r4 = gdb_regs[_R4]; + kernel_regs->ARM_r5 = gdb_regs[_R5]; + kernel_regs->ARM_r6 = gdb_regs[_R6]; + kernel_regs->ARM_r7 = gdb_regs[_R7]; + kernel_regs->ARM_r8 = gdb_regs[_R8]; + kernel_regs->ARM_r9 = gdb_regs[_R9]; + kernel_regs->ARM_r10 = gdb_regs[_R10]; + kernel_regs->ARM_fp = gdb_regs[_FP]; + kernel_regs->ARM_ip = gdb_regs[_IP]; + kernel_regs->ARM_sp = gdb_regs[_SPT]; + kernel_regs->ARM_lr = gdb_regs[_LR]; + kernel_regs->ARM_pc = gdb_regs[_PC]; + kernel_regs->ARM_cpsr = gdb_regs[_CPSR]; +} + +void +sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) +{ + struct pt_regs *thread_regs; + int regno; + + /* Just making sure... */ + if (task == NULL) + return; + + /* Initialize to zero */ + for (regno = 0; regno < GDB_MAX_REGS; regno++) + gdb_regs[regno] = 0; + + /* Otherwise, we have only some registers from switch_to() */ + thread_regs = task_pt_regs(task); + gdb_regs[_R0] = thread_regs->ARM_r0; + gdb_regs[_R1] = thread_regs->ARM_r1; + gdb_regs[_R2] = thread_regs->ARM_r2; + gdb_regs[_R3] = thread_regs->ARM_r3; + gdb_regs[_R4] = thread_regs->ARM_r4; + gdb_regs[_R5] = thread_regs->ARM_r5; + gdb_regs[_R6] = thread_regs->ARM_r6; + gdb_regs[_R7] = thread_regs->ARM_r7; + gdb_regs[_R8] = thread_regs->ARM_r8; + gdb_regs[_R9] = thread_regs->ARM_r9; + gdb_regs[_R10] = thread_regs->ARM_r10; + gdb_regs[_FP] = thread_regs->ARM_fp; + gdb_regs[_IP] = thread_regs->ARM_ip; + gdb_regs[_SPT] = thread_regs->ARM_sp; + gdb_regs[_LR] = thread_regs->ARM_lr; + gdb_regs[_PC] = thread_regs->ARM_pc; + gdb_regs[_CPSR] = thread_regs->ARM_cpsr; +} + +static int compiled_break; + +int kgdb_arch_handle_exception(int exception_vector, int signo, + int err_code, char *remcom_in_buffer, + char *remcom_out_buffer, + struct pt_regs *linux_regs) +{ + unsigned long addr; + char *ptr; + + switch (remcom_in_buffer[0]) { + case 'D': + case 'k': + case 'c': + kgdb_contthread = NULL; + + /* + * Try to read optional parameter, pc unchanged if no parm. + * If this was a compiled breakpoint, we need to move + * to the next instruction or we will just breakpoint + * over and over again. + */ + ptr = &remcom_in_buffer[1]; + if (kgdb_hex2long(&ptr, &addr)) + linux_regs->ARM_pc = addr; + else if (compiled_break == 1) + linux_regs->ARM_pc += 4; + + compiled_break = 0; + + return 0; + } + + return -1; +} + +static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr) +{ + kgdb_handle_exception(1, SIGTRAP, 0, regs); + + return 0; +} + +static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr) +{ + compiled_break = 1; + kgdb_handle_exception(1, SIGTRAP, 0, regs); + + return 0; +} + +static struct undef_hook kgdb_brkpt_hook = { + .instr_mask = 0xffffffff, + .instr_val = KGDB_BREAKINST, + .fn = kgdb_brk_fn +}; + +static struct undef_hook kgdb_compiled_brkpt_hook = { + .instr_mask = 0xffffffff, + .instr_val = KGDB_COMPILED_BREAK, + .fn = kgdb_compiled_brk_fn +}; + +/** + * kgdb_arch_init - Perform any architecture specific initalization. + * + * This function will handle the initalization of any architecture + * specific callbacks. + */ +int kgdb_arch_init(void) +{ + register_undef_hook(&kgdb_brkpt_hook); + register_undef_hook(&kgdb_compiled_brkpt_hook); + + return 0; +} + +/** + * kgdb_arch_exit - Perform any architecture specific uninitalization. + * + * This function will handle the uninitalization of any architecture + * specific callbacks, for dynamic registration and unregistration. + */ +void kgdb_arch_exit(void) +{ + unregister_undef_hook(&kgdb_brkpt_hook); + unregister_undef_hook(&kgdb_compiled_brkpt_hook); +} + +/* + * Register our undef instruction hooks with ARM undef core. + * We regsiter a hook specifically looking for the KGB break inst + * and we handle the normal undef case within the do_undefinstr + * handler. + */ +struct kgdb_arch arch_kgdb_ops = { +#ifndef __ARMEB__ + .gdb_bpt_instr = {0xfe, 0xde, 0xff, 0xe7} +#else /* ! __ARMEB__ */ + .gdb_bpt_instr = {0xe7, 0xff, 0xde, 0xfe} +#endif +}; diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 5ee39e10c8d18a37eb8004e91b0e5c046bd2eff7..d28513f14d05906cec08a849128f76edaaf5ad16 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -296,8 +296,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs) unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline; INIT_HLIST_HEAD(&empty_rp); - spin_lock_irqsave(&kretprobe_lock, flags); - head = kretprobe_inst_table_head(current); + kretprobe_hash_lock(current, &head, &flags); /* * It is possible to have multiple instances associated with a given @@ -337,7 +336,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs) } kretprobe_assert(ri, orig_ret_address, trampoline_address); - spin_unlock_irqrestore(&kretprobe_lock, flags); + kretprobe_hash_unlock(current, &flags); hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) { hlist_del(&ri->hlist); @@ -347,7 +346,6 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs) return (void *)orig_ret_address; } -/* Called with kretprobe_lock held. */ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, struct pt_regs *regs) { diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 79b7e5cf5416cff90059fd145ca6a2c76d253011..a68259a0cccdb54ac3dd06cb3e5248b9b0904cd8 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 199b3680118bc4c5f09c4ee300a41627830d587a..3fd88233706413d09198bb6a69780415a9b5eb5e 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -51,7 +51,7 @@ extern void setup_mm_for_reboot(char mode); static volatile int hlt_counter; -#include +#include void disable_hlt(void) { @@ -162,7 +162,7 @@ void cpu_idle(void) if (!idle) idle = default_idle; leds_event(led_idle_start); - tick_nohz_stop_sched_tick(); + tick_nohz_stop_sched_tick(1); while (!need_resched()) idle(); leds_event(led_idle_end); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b7b0720bc1bbe8295ea3ca7b2849e4a5ad875bf2..38f0e7940a132b1c9e0458bc10e9d1dc3f2401ee 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "compat.h" #include "atags.h" @@ -853,6 +854,7 @@ void __init setup_arch(char **cmdline_p) conswitchp = &dummy_con; #endif #endif + early_trap_init(); } diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 5a7c09564d134cfdb8935f642e691de3f29b82c3..e9842f6767f959b3cfb134b7325f4076ca1dcf89 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -100,7 +100,7 @@ int __cpuinit __cpu_up(unsigned int cpu) * a 1:1 mapping for the physical address of the kernel. */ pgd = pgd_alloc(&init_mm); - pmd = pmd_offset(pgd, PHYS_OFFSET); + pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET); *pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) | PMD_TYPE_SECT | PMD_SECT_AP_WRITE); @@ -139,7 +139,7 @@ int __cpuinit __cpu_up(unsigned int cpu) secondary_data.stack = NULL; secondary_data.pgdir = 0; - *pmd_offset(pgd, PHYS_OFFSET) = __pmd(0); + *pmd = __pmd(0); pgd_free(&init_mm, pgd); if (ret) { diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 5595fdd75e8200ec0e8d5ea8a54c750ed0398e1f..7277aef8309836fb74b6e2368beabf050757af9d 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -707,6 +707,11 @@ void abort(void) EXPORT_SYMBOL(abort); void __init trap_init(void) +{ + return; +} + +void __init early_trap_init(void) { unsigned long vectors = CONFIG_VECTORS_BASE; extern char __stubs_start[], __stubs_end[]; diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S index c55aaa2a2088bfea4cd28bcba11f6da6d6c1169c..8678eb2b7a60a21feaf0a74a919cf3a536dc3fd0 100644 --- a/arch/arm/lib/ecard.S +++ b/arch/arm/lib/ecard.S @@ -12,7 +12,7 @@ */ #include #include -#include +#include #define CPSR2SPSR(rt) \ mrs rt, cpsr; \ diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 1dd8ea4f9a9c5f7b13e91e2a4c87948803d539f1..2034d4dbe6ad3a3cddf20c8e9f75516021e93c92 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -20,7 +20,7 @@ * r2, r3 contains the zero-extended value * lr corrupted * - * No other registers must be altered. (see include/asm-arm/uaccess.h + * No other registers must be altered. (see * for specific ASM register usage). * * Note that ADDR_LIMIT is either 0 or 0xc0000000. diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index 4ef9041851423fb7006cd6d8210a5bcec395ee72..9aaf7c72065d852a9fa049479d8f333430c0fe26 100644 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -9,7 +9,7 @@ */ #include #include -#include +#include .Linsw_bad_alignment: adr r0, .Linsw_bad_align_msg diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index 1607a29f49b718c533c1372c1fae8df9ebd48121..cd34503e424d6ef41aa1664be9857619d7563bf8 100644 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -9,7 +9,7 @@ */ #include #include -#include +#include .Loutsw_bad_alignment: adr r0, .Loutsw_bad_align_msg diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 8620afe54f720da93ad062ff02df7a9e96743068..08ec7dffa52e44cf5d15b720891b0717547ad7f7 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -20,7 +20,7 @@ * Outputs: r0 is the error code * lr corrupted * - * No other registers must be altered. (see include/asm-arm/uaccess.h + * No other registers must be altered. (see * for specific ASM register usage). * * Note that ADDR_LIMIT is either 0 or 0xc0000000 diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c index 83f57da3184cceea1dd3ba64bd860b1fb9435993..81a3ecc0d104d0eddc0eb74a7609c42b082aff75 100644 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -20,14 +20,14 @@ #include #include #include -#include +#include #include #include #include #include -#include +#include #include "core.h" diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index b016be2b0e35360ac135b6db8521e3b6d10cfb01..dfb26bc23d1a8838d8a8fd8a5a5bd37079f45051 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include #include diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/arch/arm/mach-aaec2000/include/mach/aaec2000.h similarity index 99% rename from include/asm-arm/arch-aaec2000/aaec2000.h rename to arch/arm/mach-aaec2000/include/mach/aaec2000.h index a6d1ee0980f21d3372a552952f79c4aaef96c0da..bc729c42f8437dfae4f1e9aac9db2eb1d336d414 100644 --- a/include/asm-arm/arch-aaec2000/aaec2000.h +++ b/arch/arm/mach-aaec2000/include/mach/aaec2000.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaec2000/aaec2000.h + * arch/arm/mach-aaec2000/include/mach/aaec2000.h * * AAEC-2000 registers definition * diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/arch/arm/mach-aaec2000/include/mach/aaed2000.h similarity index 96% rename from include/asm-arm/arch-aaec2000/aaed2000.h rename to arch/arm/mach-aaec2000/include/mach/aaed2000.h index bc76d2badb91f733301138f4006c7c3e56da1ee6..f821295ca71bb819a05e565598f10cb34229430b 100644 --- a/include/asm-arm/arch-aaec2000/aaed2000.h +++ b/arch/arm/mach-aaec2000/include/mach/aaed2000.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaec2000/aaed2000.h + * arch/arm/mach-aaec2000/include/mach/aaed2000.h * * AAED-2000 specific bits definition * diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S new file mode 100644 index 0000000000000000000000000000000000000000..0b6351d7c38973e7431c601e291afab173d54551 --- /dev/null +++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S @@ -0,0 +1,37 @@ +/* arch/arm/mach-aaec2000/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "hardware.h" + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x80000000 @ physical + movne \rx, #io_p2v(0x80000000) @ virtual + orr \rx, \rx, #0x00000800 + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #0x10] + tst \rd, #(1 << 7) + beq 1002b + .endm + + .macro waituart,rd,rx +#if 0 +1001: ldr \rd, [\rx, #0x10] + tst \rd, #(1 << 5) + beq 1001b +#endif + .endm diff --git a/arch/arm/mach-aaec2000/include/mach/dma.h b/arch/arm/mach-aaec2000/include/mach/dma.h new file mode 100644 index 0000000000000000000000000000000000000000..2da846c72fe736b0550d815815380c13fb861661 --- /dev/null +++ b/arch/arm/mach-aaec2000/include/mach/dma.h @@ -0,0 +1,9 @@ +/* + * arch/arm/mach-aaec2000/include/mach/dma.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ diff --git a/arch/arm/mach-aaec2000/include/mach/entry-macro.S b/arch/arm/mach-aaec2000/include/mach/entry-macro.S new file mode 100644 index 0000000000000000000000000000000000000000..c8fb34469007952ac377eb7a7c0114e38b8b90b9 --- /dev/null +++ b/arch/arm/mach-aaec2000/include/mach/entry-macro.S @@ -0,0 +1,40 @@ +/* + * arch/arm/mach-aaec2000/include/mach/entry-macro.S + * + * Low-level IRQ helper for aaec-2000 based platforms + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + mov r4, #0xf8000000 + add r4, r4, #0x00000500 + mov \base, r4 + ldr \irqstat, [\base, #0] + cmp \irqstat, #0 + bne 1001f + ldr \irqnr, =NR_IRQS+1 + b 1003f +1001: mov \irqnr, #0 +1002: ands \tmp, \irqstat, #1 + mov \irqstat, \irqstat, LSR #1 + add \irqnr, \irqnr, #1 + beq 1002b + sub \irqnr, \irqnr, #1 +1003: + .endm diff --git a/arch/arm/mach-aaec2000/include/mach/hardware.h b/arch/arm/mach-aaec2000/include/mach/hardware.h new file mode 100644 index 0000000000000000000000000000000000000000..965a6f6672d64c9f609be04a767d4fc8920ef718 --- /dev/null +++ b/arch/arm/mach-aaec2000/include/mach/hardware.h @@ -0,0 +1,50 @@ +/* + * arch/arm/mach-aaec2000/include/mach/hardware.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include +#include + +/* The kernel is loaded at physical address 0xf8000000. + * We map the IO space a bit after + */ +#define PIO_APB_BASE 0x80000000 +#define VIO_APB_BASE 0xf8000000 +#define IO_APB_LENGTH 0x2000 +#define PIO_AHB_BASE 0x80002000 +#define VIO_AHB_BASE 0xf8002000 +#define IO_AHB_LENGTH 0x2000 + +#define VIO_BASE VIO_APB_BASE +#define PIO_BASE PIO_APB_BASE + +#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE ) +#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE ) + +#ifndef __ASSEMBLY__ + +#include + +/* FIXME: Is it needed to optimize this a la pxa ?? */ +#define __REG(x) (*((volatile u32 *)io_p2v(x))) +#define __PREG(x) (io_v2p((u32)&(x))) + +#else /* __ASSEMBLY__ */ + +#define __REG(x) io_p2v(x) +#define __PREG(x) io_v2p(x) + +#endif + +#include "aaec2000.h" + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/io.h b/arch/arm/mach-aaec2000/include/mach/io.h new file mode 100644 index 0000000000000000000000000000000000000000..c87c24de1110b1f1d33bf46234699fcba23aa14b --- /dev/null +++ b/arch/arm/mach-aaec2000/include/mach/io.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-aaec2000/include/mach/io.h + * + * Copied from asm/arch/sa1100/io.h + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#include + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-aaec2000/include/mach/irqs.h b/arch/arm/mach-aaec2000/include/mach/irqs.h new file mode 100644 index 0000000000000000000000000000000000000000..bf45c6d2f294fa1436699aa2b246d426022b4746 --- /dev/null +++ b/arch/arm/mach-aaec2000/include/mach/irqs.h @@ -0,0 +1,46 @@ +/* + * arch/arm/mach-aaec2000/include/mach/irqs.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + + +#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */ +#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */ +#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */ +#define INT_MV_FIQ 3 /* Media Changed Interrupt */ +#define INT_SC 4 /* Sound Codec Interrupt */ +#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */ +#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */ +#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */ +#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */ +#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */ +#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */ +#define INT_TICK 11 /* 64Hz Tick Interrupt */ +#define INT_UART1 12 /* UART1 Interrupt */ +#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */ +#define INT_LCD 14 /* LCD Interrupt */ +#define INT_SSI 15 /* SSI End of Transfer Interrupt */ +#define INT_UART3 16 /* UART3 Interrupt */ +#define INT_SCI 17 /* SCI Interrupt */ +#define INT_AAC 18 /* Advanced Audio Codec Interrupt */ +#define INT_MMC 19 /* MMC Interrupt */ +#define INT_USB 20 /* USB Interrupt */ +#define INT_DMA 21 /* DMA Interrupt */ +#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */ +#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */ +#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */ +#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */ +#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */ +#define INT_BMI 27 /* BMI Interrupt */ + +#define NR_IRQS (INT_BMI + 1) + +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h new file mode 100644 index 0000000000000000000000000000000000000000..56ae900a482e28d1bd697bd030f316fc809c2a0a --- /dev/null +++ b/arch/arm/mach-aaec2000/include/mach/memory.h @@ -0,0 +1,30 @@ +/* + * arch/arm/mach-aaec2000/include/mach/memory.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + + +#define PHYS_OFFSET UL(0xf0000000) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +/* + * The nodes are the followings: + * + * node 0: 0xf000.0000 - 0xf3ff.ffff + * node 1: 0xf400.0000 - 0xf7ff.ffff + * node 2: 0xf800.0000 - 0xfbff.ffff + * node 3: 0xfc00.0000 - 0xffff.ffff + */ +#define NODE_MEM_SIZE_BITS 26 + +#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h new file mode 100644 index 0000000000000000000000000000000000000000..8f4115d734ce18832d005a31086694d643def027 --- /dev/null +++ b/arch/arm/mach-aaec2000/include/mach/system.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-aaed2000/include/mach/system.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + cpu_reset(0); +} + +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/timex.h b/arch/arm/mach-aaec2000/include/mach/timex.h new file mode 100644 index 0000000000000000000000000000000000000000..6c8edf4a8828a35b3ed838fd44e3786a1511f918 --- /dev/null +++ b/arch/arm/mach-aaec2000/include/mach/timex.h @@ -0,0 +1,18 @@ +/* + * arch/arm/mach-aaec2000/include/mach/timex.h + * + * AAEC-2000 Architecture timex specification + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#define CLOCK_TICK_RATE 508000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/uncompress.h b/arch/arm/mach-aaec2000/include/mach/uncompress.h new file mode 100644 index 0000000000000000000000000000000000000000..381ecad1a1bba78d424d375e831ed562b8c28907 --- /dev/null +++ b/arch/arm/mach-aaec2000/include/mach/uncompress.h @@ -0,0 +1,46 @@ +/* + * arch/arm/mach-aaec2000/include/mach/uncompress.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include "hardware.h" + +#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) + +static void putc(int c) +{ + unsigned long serial_port; + do { + serial_port = _UART3_BASE; + if (UART(UART_CR) & UART_CR_EN) break; + serial_port = _UART1_BASE; + if (UART(UART_CR) & UART_CR_EN) break; + serial_port = _UART2_BASE; + if (UART(UART_CR) & UART_CR_EN) break; + return; + } while (0); + + /* wait for space in the UART's transmitter */ + while ((UART(UART_SR) & UART_SR_TxFF)) + barrier(); + + /* send the character out. */ + UART(UART_DR) = c; +} + +static inline void flush(void) +{ +} + +#define arch_decomp_setup() +#define arch_decomp_wdog() + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h new file mode 100644 index 0000000000000000000000000000000000000000..551f68f666bf0273bb465272887cedfbe7244b94 --- /dev/null +++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h @@ -0,0 +1,16 @@ +/* + * arch/arm/mach-aaec2000/include/mach/vmalloc.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (PAGE_OFFSET + 0x10000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 5bad6b9b00d77be2dbbc1ea65f90d8d746dc6f26..a048b92cb4079a660866bdac3a25fa74a12b81e6 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -297,7 +297,7 @@ config MTD_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. -config MTD_NAND_AT91_BUSWIDTH_16 +config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK) help diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 933fa8f55cbc76fa60c6b52d714245dff2503125..638948c16770e50ce21cba285f0b7d65d6ca2fcd 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -17,10 +17,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include "generic.h" #include "clock.h" diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 747b9dedab88a8e51d75be21b5c9799f34e38b53..abb4aac8fa983a6c90742d86cd12e460c36b8cf7 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -20,11 +20,11 @@ #include