From e7cb55b946a2182c347047dc903c6ed0daef100c Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 28 Oct 2009 13:33:08 +0000 Subject: [PATCH 001/618] kmemleak: Do not use off-slab management with SLAB_NOLEAKTRACE With the slab allocator, if off-slab management is enabled for the kmem_caches used by kmemleak, it leads to recursive calls into kmemleak_alloc(). Off-slab management can be triggered by other config options increasing the slab size, e.g. DEBUG_PAGEALLOC. Reported-by: Tetsuo Handa Reviewed-by: Pekka Enberg Cc: Christoph Lameter Signed-off-by: Catalin Marinas --- mm/slab.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/slab.c b/mm/slab.c index 7dfa481c96ba..646db3085193 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -2261,9 +2261,11 @@ kmem_cache_create (const char *name, size_t size, size_t align, /* * Determine if the slab management is 'on' or 'off' slab. * (bootstrapping cannot cope with offslab caches so don't do - * it too early on.) + * it too early on. Always use on-slab management when + * SLAB_NOLEAKTRACE to avoid recursive calls into kmemleak) */ - if ((size >= (PAGE_SIZE >> 3)) && !slab_early_init) + if ((size >= (PAGE_SIZE >> 3)) && !slab_early_init && + !(flags & SLAB_NOLEAKTRACE)) /* * Size is large, assume best to place the slab management obj * off-slab (should allow better packing of objs). -- GitLab From c017b4be3e84176cab10eca5e6c4faeb8cfc6f3e Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 28 Oct 2009 13:33:09 +0000 Subject: [PATCH 002/618] kmemleak: Simplify the kmemleak_scan_area() function prototype This function was taking non-necessary arguments which can be determined by kmemleak. The patch also modifies the calling sites. Signed-off-by: Catalin Marinas Cc: Pekka Enberg Cc: Christoph Lameter Cc: Rusty Russell --- include/linux/kmemleak.h | 6 ++--- kernel/module.c | 7 ++---- mm/kmemleak.c | 49 +++++++++++++++++----------------------- mm/slab.c | 4 ++-- 4 files changed, 27 insertions(+), 39 deletions(-) diff --git a/include/linux/kmemleak.h b/include/linux/kmemleak.h index 3c7497d46ee9..99d9a6766f7e 100644 --- a/include/linux/kmemleak.h +++ b/include/linux/kmemleak.h @@ -32,8 +32,7 @@ extern void kmemleak_padding(const void *ptr, unsigned long offset, size_t size) __ref; extern void kmemleak_not_leak(const void *ptr) __ref; extern void kmemleak_ignore(const void *ptr) __ref; -extern void kmemleak_scan_area(const void *ptr, unsigned long offset, - size_t length, gfp_t gfp) __ref; +extern void kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp) __ref; extern void kmemleak_no_scan(const void *ptr) __ref; static inline void kmemleak_alloc_recursive(const void *ptr, size_t size, @@ -84,8 +83,7 @@ static inline void kmemleak_not_leak(const void *ptr) static inline void kmemleak_ignore(const void *ptr) { } -static inline void kmemleak_scan_area(const void *ptr, unsigned long offset, - size_t length, gfp_t gfp) +static inline void kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp) { } static inline void kmemleak_erase(void **ptr) diff --git a/kernel/module.c b/kernel/module.c index 8b7d8805819d..1eb952097077 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2043,9 +2043,7 @@ static void kmemleak_load_module(struct module *mod, Elf_Ehdr *hdr, unsigned int i; /* only scan the sections containing data */ - kmemleak_scan_area(mod->module_core, (unsigned long)mod - - (unsigned long)mod->module_core, - sizeof(struct module), GFP_KERNEL); + kmemleak_scan_area(mod, sizeof(struct module), GFP_KERNEL); for (i = 1; i < hdr->e_shnum; i++) { if (!(sechdrs[i].sh_flags & SHF_ALLOC)) @@ -2054,8 +2052,7 @@ static void kmemleak_load_module(struct module *mod, Elf_Ehdr *hdr, && strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) != 0) continue; - kmemleak_scan_area(mod->module_core, sechdrs[i].sh_addr - - (unsigned long)mod->module_core, + kmemleak_scan_area((void *)sechdrs[i].sh_addr, sechdrs[i].sh_size, GFP_KERNEL); } } diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 8bf765c4f58d..96106358e042 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -119,8 +119,8 @@ /* scanning area inside a memory block */ struct kmemleak_scan_area { struct hlist_node node; - unsigned long offset; - size_t length; + unsigned long start; + size_t size; }; #define KMEMLEAK_GREY 0 @@ -241,8 +241,6 @@ struct early_log { const void *ptr; /* allocated/freed memory block */ size_t size; /* memory block size */ int min_count; /* minimum reference count */ - unsigned long offset; /* scan area offset */ - size_t length; /* scan area length */ unsigned long trace[MAX_TRACE]; /* stack trace */ unsigned int trace_len; /* stack trace length */ }; @@ -720,14 +718,13 @@ static void make_black_object(unsigned long ptr) * Add a scanning area to the object. If at least one such area is added, * kmemleak will only scan these ranges rather than the whole memory block. */ -static void add_scan_area(unsigned long ptr, unsigned long offset, - size_t length, gfp_t gfp) +static void add_scan_area(unsigned long ptr, size_t size, gfp_t gfp) { unsigned long flags; struct kmemleak_object *object; struct kmemleak_scan_area *area; - object = find_and_get_object(ptr, 0); + object = find_and_get_object(ptr, 1); if (!object) { kmemleak_warn("Adding scan area to unknown object at 0x%08lx\n", ptr); @@ -741,7 +738,7 @@ static void add_scan_area(unsigned long ptr, unsigned long offset, } spin_lock_irqsave(&object->lock, flags); - if (offset + length > object->size) { + if (ptr + size > object->pointer + object->size) { kmemleak_warn("Scan area larger than object 0x%08lx\n", ptr); dump_object_info(object); kmem_cache_free(scan_area_cache, area); @@ -749,8 +746,8 @@ static void add_scan_area(unsigned long ptr, unsigned long offset, } INIT_HLIST_NODE(&area->node); - area->offset = offset; - area->length = length; + area->start = ptr; + area->size = size; hlist_add_head(&area->node, &object->area_list); out_unlock: @@ -786,7 +783,7 @@ static void object_no_scan(unsigned long ptr) * processed later once kmemleak is fully initialized. */ static void __init log_early(int op_type, const void *ptr, size_t size, - int min_count, unsigned long offset, size_t length) + int min_count) { unsigned long flags; struct early_log *log; @@ -808,8 +805,6 @@ static void __init log_early(int op_type, const void *ptr, size_t size, log->ptr = ptr; log->size = size; log->min_count = min_count; - log->offset = offset; - log->length = length; if (op_type == KMEMLEAK_ALLOC) log->trace_len = __save_stack_trace(log->trace); crt_early_log++; @@ -858,7 +853,7 @@ void __ref kmemleak_alloc(const void *ptr, size_t size, int min_count, if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr)) create_object((unsigned long)ptr, size, min_count, gfp); else if (atomic_read(&kmemleak_early_log)) - log_early(KMEMLEAK_ALLOC, ptr, size, min_count, 0, 0); + log_early(KMEMLEAK_ALLOC, ptr, size, min_count); } EXPORT_SYMBOL_GPL(kmemleak_alloc); @@ -873,7 +868,7 @@ void __ref kmemleak_free(const void *ptr) if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr)) delete_object_full((unsigned long)ptr); else if (atomic_read(&kmemleak_early_log)) - log_early(KMEMLEAK_FREE, ptr, 0, 0, 0, 0); + log_early(KMEMLEAK_FREE, ptr, 0, 0); } EXPORT_SYMBOL_GPL(kmemleak_free); @@ -888,7 +883,7 @@ void __ref kmemleak_free_part(const void *ptr, size_t size) if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr)) delete_object_part((unsigned long)ptr, size); else if (atomic_read(&kmemleak_early_log)) - log_early(KMEMLEAK_FREE_PART, ptr, size, 0, 0, 0); + log_early(KMEMLEAK_FREE_PART, ptr, size, 0); } EXPORT_SYMBOL_GPL(kmemleak_free_part); @@ -903,7 +898,7 @@ void __ref kmemleak_not_leak(const void *ptr) if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr)) make_gray_object((unsigned long)ptr); else if (atomic_read(&kmemleak_early_log)) - log_early(KMEMLEAK_NOT_LEAK, ptr, 0, 0, 0, 0); + log_early(KMEMLEAK_NOT_LEAK, ptr, 0, 0); } EXPORT_SYMBOL(kmemleak_not_leak); @@ -919,22 +914,21 @@ void __ref kmemleak_ignore(const void *ptr) if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr)) make_black_object((unsigned long)ptr); else if (atomic_read(&kmemleak_early_log)) - log_early(KMEMLEAK_IGNORE, ptr, 0, 0, 0, 0); + log_early(KMEMLEAK_IGNORE, ptr, 0, 0); } EXPORT_SYMBOL(kmemleak_ignore); /* * Limit the range to be scanned in an allocated memory block. */ -void __ref kmemleak_scan_area(const void *ptr, unsigned long offset, - size_t length, gfp_t gfp) +void __ref kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp) { pr_debug("%s(0x%p)\n", __func__, ptr); if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr)) - add_scan_area((unsigned long)ptr, offset, length, gfp); + add_scan_area((unsigned long)ptr, size, gfp); else if (atomic_read(&kmemleak_early_log)) - log_early(KMEMLEAK_SCAN_AREA, ptr, 0, 0, offset, length); + log_early(KMEMLEAK_SCAN_AREA, ptr, size, 0); } EXPORT_SYMBOL(kmemleak_scan_area); @@ -948,7 +942,7 @@ void __ref kmemleak_no_scan(const void *ptr) if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr)) object_no_scan((unsigned long)ptr); else if (atomic_read(&kmemleak_early_log)) - log_early(KMEMLEAK_NO_SCAN, ptr, 0, 0, 0, 0); + log_early(KMEMLEAK_NO_SCAN, ptr, 0, 0); } EXPORT_SYMBOL(kmemleak_no_scan); @@ -1075,9 +1069,9 @@ static void scan_object(struct kmemleak_object *object) } } else hlist_for_each_entry(area, elem, &object->area_list, node) - scan_block((void *)(object->pointer + area->offset), - (void *)(object->pointer + area->offset - + area->length), object, 0); + scan_block((void *)area->start, + (void *)(area->start + area->size), + object, 0); out: spin_unlock_irqrestore(&object->lock, flags); } @@ -1642,8 +1636,7 @@ void __init kmemleak_init(void) kmemleak_ignore(log->ptr); break; case KMEMLEAK_SCAN_AREA: - kmemleak_scan_area(log->ptr, log->offset, log->length, - GFP_KERNEL); + kmemleak_scan_area(log->ptr, log->size, GFP_KERNEL); break; case KMEMLEAK_NO_SCAN: kmemleak_no_scan(log->ptr); diff --git a/mm/slab.c b/mm/slab.c index 646db3085193..d2713a944ebd 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -2584,8 +2584,8 @@ static struct slab *alloc_slabmgmt(struct kmem_cache *cachep, void *objp, * kmemleak does not treat the ->s_mem pointer as a reference * to the object. Otherwise we will not report the leak. */ - kmemleak_scan_area(slabp, offsetof(struct slab, list), - sizeof(struct list_head), local_flags); + kmemleak_scan_area(&slabp->list, sizeof(struct list_head), + local_flags); if (!slabp) return NULL; } else { -- GitLab From a6f5aa1ea05686ad6e84593a00a04161e6dfb3a3 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 28 Oct 2009 13:33:10 +0000 Subject: [PATCH 003/618] kmemleak: Scan the _ftrace_events section in modules This section contains pointers to allocated objects and not scanning it leads to false positives. Reported-by: Zdenek Kabelac Acked-by: Rusty Russell Signed-off-by: Catalin Marinas --- kernel/module.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/module.c b/kernel/module.c index 1eb952097077..dd29ba43c34f 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2380,6 +2380,12 @@ static noinline struct module *load_module(void __user *umod, "_ftrace_events", sizeof(*mod->trace_events), &mod->num_trace_events); + /* + * This section contains pointers to allocated objects in the trace + * code and not scanning it leads to false positives. + */ + kmemleak_scan_area(mod->trace_events, sizeof(*mod->trace_events) * + mod->num_trace_events, GFP_KERNEL); #endif #ifdef CONFIG_FTRACE_MCOUNT_RECORD /* sechdrs[0].sh_size is always zero */ -- GitLab From 0587da40be78d3704a48d3e9a619183891727f5f Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 28 Oct 2009 13:33:11 +0000 Subject: [PATCH 004/618] kmemleak: Release the object lock before calling put_object() The put_object() function may free the object if the use_count dropped to 0. There shouldn't be further accesses to such object unless it is known that the use_count is non-zero. Signed-off-by: Catalin Marinas --- mm/kmemleak.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 96106358e042..f06c0921e472 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1025,11 +1025,14 @@ static void scan_block(void *_start, void *_end, * added to the gray_list. */ object->count++; - if (color_gray(object)) + if (color_gray(object)) { list_add_tail(&object->gray_list, &gray_list); - else - put_object(object); + spin_unlock_irqrestore(&object->lock, flags); + continue; + } + spin_unlock_irqrestore(&object->lock, flags); + put_object(object); } } -- GitLab From fefdd336b2a2f7617e0c8a0777c731d9ed6454ae Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 28 Oct 2009 13:33:12 +0000 Subject: [PATCH 005/618] kmemleak: Show the age of an unreferenced object The jiffies shown for unreferenced objects isn't always meaningful to people debugging kernel memory leaks. This patch adds the age as well to the displayed information. Signed-off-by: Catalin Marinas --- mm/kmemleak.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index f06c0921e472..ce79d91eeef7 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -346,11 +346,13 @@ static void print_unreferenced(struct seq_file *seq, struct kmemleak_object *object) { int i; + unsigned int msecs_age = jiffies_to_msecs(jiffies - object->jiffies); seq_printf(seq, "unreferenced object 0x%08lx (size %zu):\n", object->pointer, object->size); - seq_printf(seq, " comm \"%s\", pid %d, jiffies %lu\n", - object->comm, object->pid, object->jiffies); + seq_printf(seq, " comm \"%s\", pid %d, jiffies %lu (age %d.%03ds)\n", + object->comm, object->pid, object->jiffies, + msecs_age / 1000, msecs_age % 1000); hex_dump_object(seq, object); seq_printf(seq, " backtrace:\n"); -- GitLab From 04609ccc40c4e8f3eabe8894eb0de881c8b984fd Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 28 Oct 2009 13:33:12 +0000 Subject: [PATCH 006/618] kmemleak: Reduce the false positives by checking for modified objects If an object was modified since it was previously suspected as leak, do not report it. The modification check is done by calculating the checksum (CRC32) of such object. Several false positives are caused by objects being removed from linked lists (e.g. allocation pools) and temporarily breaking the reference chain since kmemleak runs concurrently with such list mutation primitives. Signed-off-by: Catalin Marinas --- mm/kmemleak.c | 124 ++++++++++++++++++++++++++++---------------------- 1 file changed, 70 insertions(+), 54 deletions(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index ce79d91eeef7..002adc3cf3a1 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -93,6 +93,7 @@ #include #include #include +#include #include #include @@ -108,7 +109,6 @@ #define MSECS_MIN_AGE 5000 /* minimum object age for reporting */ #define SECS_FIRST_SCAN 60 /* delay before the first scan */ #define SECS_SCAN_WAIT 600 /* subsequent auto scanning delay */ -#define GRAY_LIST_PASSES 25 /* maximum number of gray list scans */ #define MAX_SCAN_SIZE 4096 /* maximum size of a scanned block */ #define BYTES_PER_POINTER sizeof(void *) @@ -149,6 +149,8 @@ struct kmemleak_object { int min_count; /* the total number of pointers found pointing to this object */ int count; + /* checksum for detecting modified objects */ + u32 checksum; /* memory ranges to be scanned inside an object (empty for all) */ struct hlist_head area_list; unsigned long trace[MAX_TRACE]; @@ -164,8 +166,6 @@ struct kmemleak_object { #define OBJECT_REPORTED (1 << 1) /* flag set to not scan the object */ #define OBJECT_NO_SCAN (1 << 2) -/* flag set on newly allocated objects */ -#define OBJECT_NEW (1 << 3) /* number of bytes to print per line; must be 16 or 32 */ #define HEX_ROW_SIZE 16 @@ -321,11 +321,6 @@ static bool color_gray(const struct kmemleak_object *object) object->count >= object->min_count; } -static bool color_black(const struct kmemleak_object *object) -{ - return object->min_count == KMEMLEAK_BLACK; -} - /* * Objects are considered unreferenced only if their color is white, they have * not be deleted and have a minimum age to avoid false positives caused by @@ -333,7 +328,7 @@ static bool color_black(const struct kmemleak_object *object) */ static bool unreferenced_object(struct kmemleak_object *object) { - return (object->flags & OBJECT_ALLOCATED) && color_white(object) && + return (color_white(object) && object->flags & OBJECT_ALLOCATED) && time_before_eq(object->jiffies + jiffies_min_age, jiffies_last_scan); } @@ -381,6 +376,7 @@ static void dump_object_info(struct kmemleak_object *object) pr_notice(" min_count = %d\n", object->min_count); pr_notice(" count = %d\n", object->count); pr_notice(" flags = 0x%lx\n", object->flags); + pr_notice(" checksum = %d\n", object->checksum); pr_notice(" backtrace:\n"); print_stack_trace(&trace, 4); } @@ -522,12 +518,13 @@ static struct kmemleak_object *create_object(unsigned long ptr, size_t size, INIT_HLIST_HEAD(&object->area_list); spin_lock_init(&object->lock); atomic_set(&object->use_count, 1); - object->flags = OBJECT_ALLOCATED | OBJECT_NEW; + object->flags = OBJECT_ALLOCATED; object->pointer = ptr; object->size = size; object->min_count = min_count; - object->count = -1; /* no color initially */ + object->count = 0; /* white color initially */ object->jiffies = jiffies; + object->checksum = 0; /* task information */ if (in_irq()) { @@ -948,6 +945,20 @@ void __ref kmemleak_no_scan(const void *ptr) } EXPORT_SYMBOL(kmemleak_no_scan); +/* + * Update an object's checksum and return true if it was modified. + */ +static bool update_checksum(struct kmemleak_object *object) +{ + u32 old_csum = object->checksum; + + if (!kmemcheck_is_obj_initialized(object->pointer, object->size)) + return false; + + object->checksum = crc32(0, (void *)object->pointer, object->size); + return object->checksum != old_csum; +} + /* * Memory scanning is a long process and it needs to be interruptable. This * function checks whether such interrupt condition occured. @@ -1081,6 +1092,39 @@ static void scan_object(struct kmemleak_object *object) spin_unlock_irqrestore(&object->lock, flags); } +/* + * Scan the objects already referenced (gray objects). More objects will be + * referenced and, if there are no memory leaks, all the objects are scanned. + */ +static void scan_gray_list(void) +{ + struct kmemleak_object *object, *tmp; + + /* + * The list traversal is safe for both tail additions and removals + * from inside the loop. The kmemleak objects cannot be freed from + * outside the loop because their use_count was incremented. + */ + object = list_entry(gray_list.next, typeof(*object), gray_list); + while (&object->gray_list != &gray_list) { + cond_resched(); + + /* may add new objects to the list */ + if (!scan_should_stop()) + scan_object(object); + + tmp = list_entry(object->gray_list.next, typeof(*object), + gray_list); + + /* remove the object from the list and release it */ + list_del(&object->gray_list); + put_object(object); + + object = tmp; + } + WARN_ON(!list_empty(&gray_list)); +} + /* * Scan data sections and all the referenced memory blocks allocated via the * kernel's standard allocators. This function must be called with the @@ -1089,10 +1133,9 @@ static void scan_object(struct kmemleak_object *object) static void kmemleak_scan(void) { unsigned long flags; - struct kmemleak_object *object, *tmp; + struct kmemleak_object *object; int i; int new_leaks = 0; - int gray_list_pass = 0; jiffies_last_scan = jiffies; @@ -1113,7 +1156,6 @@ static void kmemleak_scan(void) #endif /* reset the reference count (whiten the object) */ object->count = 0; - object->flags &= ~OBJECT_NEW; if (color_gray(object) && get_object(object)) list_add_tail(&object->gray_list, &gray_list); @@ -1171,62 +1213,36 @@ static void kmemleak_scan(void) /* * Scan the objects already referenced from the sections scanned - * above. More objects will be referenced and, if there are no memory - * leaks, all the objects will be scanned. The list traversal is safe - * for both tail additions and removals from inside the loop. The - * kmemleak objects cannot be freed from outside the loop because their - * use_count was increased. + * above. */ -repeat: - object = list_entry(gray_list.next, typeof(*object), gray_list); - while (&object->gray_list != &gray_list) { - cond_resched(); - - /* may add new objects to the list */ - if (!scan_should_stop()) - scan_object(object); - - tmp = list_entry(object->gray_list.next, typeof(*object), - gray_list); - - /* remove the object from the list and release it */ - list_del(&object->gray_list); - put_object(object); - - object = tmp; - } - - if (scan_should_stop() || ++gray_list_pass >= GRAY_LIST_PASSES) - goto scan_end; + scan_gray_list(); /* - * Check for new objects allocated during this scanning and add them - * to the gray list. + * Check for new or unreferenced objects modified since the previous + * scan and color them gray until the next scan. */ rcu_read_lock(); list_for_each_entry_rcu(object, &object_list, object_list) { spin_lock_irqsave(&object->lock, flags); - if ((object->flags & OBJECT_NEW) && !color_black(object) && - get_object(object)) { - object->flags &= ~OBJECT_NEW; + if (color_white(object) && (object->flags & OBJECT_ALLOCATED) + && update_checksum(object) && get_object(object)) { + /* color it gray temporarily */ + object->count = object->min_count; list_add_tail(&object->gray_list, &gray_list); } spin_unlock_irqrestore(&object->lock, flags); } rcu_read_unlock(); - if (!list_empty(&gray_list)) - goto repeat; - -scan_end: - WARN_ON(!list_empty(&gray_list)); + /* + * Re-scan the gray list for modified unreferenced objects. + */ + scan_gray_list(); /* - * If scanning was stopped or new objects were being allocated at a - * higher rate than gray list scanning, do not report any new - * unreferenced objects. + * If scanning was stopped do not report any new unreferenced objects. */ - if (scan_should_stop() || gray_list_pass >= GRAY_LIST_PASSES) + if (scan_should_stop()) return; /* -- GitLab From b60e26a2f03d963f8c79ad7920d64abc4d38ecbc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 6 Nov 2009 15:33:45 -0800 Subject: [PATCH 007/618] kmemleak: fix kconfig for crc32 build error kmemleak uses crc32 functions so it needs to select CRC32. Fixes build error: kmemleak.c:(.text+0x7ce62): undefined reference to `crc32_le' Signed-off-by: Randy Dunlap Signed-off-by: Catalin Marinas --- lib/Kconfig.debug | 1 + 1 file changed, 1 insertion(+) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 30df5865ecbe..732b9f6ab1ee 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -352,6 +352,7 @@ config DEBUG_KMEMLEAK select DEBUG_FS if SYSFS select STACKTRACE if STACKTRACE_SUPPORT select KALLSYMS + select CRC32 help Say Y here if you want to enable the memory leak detector. The memory allocation/freeing is traced in a way -- GitLab From 38a04e432768ec0b016f3c687b4de31ac111ae59 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Mon, 30 Nov 2009 14:32:19 +0800 Subject: [PATCH 008/618] ocfs2: Find proper end cpos for a leaf refcount block. ocfs2 refcount tree is stored as an extent tree while the leaf ocfs2_refcount_rec points to a refcount block. The following step can trip a kernel panic. mkfs.ocfs2 -b 512 -C 1M --fs-features=refcount $DEVICE mount -t ocfs2 $DEVICE $MNT_DIR FILE_NAME=$RANDOM FILE_NAME_1=$RANDOM FILE_REF="${FILE_NAME}_ref" FILE_REF_1="${FILE_NAME}_ref_1" for((i=0;i<305;i++)) do # /mnt/1048576 is a file with 1048576 sizes. cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME_1 done for((i=0;i<3;i++)) do cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME done for((i=0;i<2;i++)) do cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME_1 done cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME for((i=0;i<11;i++)) do cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME_1 done reflink $MNT_DIR/$FILE_NAME $MNT_DIR/$FILE_REF # write_f is a program which will write some bytes to a file at offset. # write_f -f file_name -l offset -w write_bytes. ./write_f -f $MNT_DIR/$FILE_REF -l $[310*1048576] -w 4096 ./write_f -f $MNT_DIR/$FILE_REF -l $[306*1048576] -w 4096 ./write_f -f $MNT_DIR/$FILE_REF -l $[311*1048576] -w 4096 ./write_f -f $MNT_DIR/$FILE_NAME -l $[310*1048576] -w 4096 ./write_f -f $MNT_DIR/$FILE_NAME -l $[311*1048576] -w 4096 reflink $MNT_DIR/$FILE_NAME $MNT_DIR/$FILE_REF_1 ./write_f -f $MNT_DIR/$FILE_NAME -l $[311*1048576] -w 4096 #kernel panic here. The reason is that if the ocfs2_extent_rec is the last record in a leaf extent block, the old solution fails to find the suitable end cpos. So this patch try to walk through the b-tree, find the next sub root and get the c_pos the next sub-tree starts from. btw, I have runned tristan's test case against the patched kernel for several days and this type of kernel panic never happens again. Signed-off-by: Tao Ma Signed-off-by: Joel Becker --- fs/ocfs2/alloc.c | 10 ++-- fs/ocfs2/alloc.h | 5 ++ fs/ocfs2/refcounttree.c | 117 +++++++++++++++++++++++++++++++++++++--- 3 files changed, 119 insertions(+), 13 deletions(-) diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index 38a42f5d59ff..5661db139ca0 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -1765,9 +1765,9 @@ static void ocfs2_create_empty_extent(struct ocfs2_extent_list *el) * * The array index of the subtree root is passed back. */ -static int ocfs2_find_subtree_root(struct ocfs2_extent_tree *et, - struct ocfs2_path *left, - struct ocfs2_path *right) +int ocfs2_find_subtree_root(struct ocfs2_extent_tree *et, + struct ocfs2_path *left, + struct ocfs2_path *right) { int i = 0; @@ -2872,8 +2872,8 @@ static int ocfs2_rotate_subtree_left(handle_t *handle, * This looks similar, but is subtly different to * ocfs2_find_cpos_for_left_leaf(). */ -static int ocfs2_find_cpos_for_right_leaf(struct super_block *sb, - struct ocfs2_path *path, u32 *cpos) +int ocfs2_find_cpos_for_right_leaf(struct super_block *sb, + struct ocfs2_path *path, u32 *cpos) { int i, j, ret = 0; u64 blkno; diff --git a/fs/ocfs2/alloc.h b/fs/ocfs2/alloc.h index 9c122d574464..1db4359ccb90 100644 --- a/fs/ocfs2/alloc.h +++ b/fs/ocfs2/alloc.h @@ -317,4 +317,9 @@ int ocfs2_path_bh_journal_access(handle_t *handle, int ocfs2_journal_access_path(struct ocfs2_caching_info *ci, handle_t *handle, struct ocfs2_path *path); +int ocfs2_find_cpos_for_right_leaf(struct super_block *sb, + struct ocfs2_path *path, u32 *cpos); +int ocfs2_find_subtree_root(struct ocfs2_extent_tree *et, + struct ocfs2_path *left, + struct ocfs2_path *right); #endif /* OCFS2_ALLOC_H */ diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index 3a0df7a1b810..9c3956f24e58 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -968,6 +968,103 @@ int ocfs2_try_remove_refcount_tree(struct inode *inode, return 0; } +/* + * Find the end range for a leaf refcount block indicated by + * el->l_recs[index].e_blkno. + */ +static int ocfs2_get_refcount_cpos_end(struct ocfs2_caching_info *ci, + struct buffer_head *ref_root_bh, + struct ocfs2_extent_block *eb, + struct ocfs2_extent_list *el, + int index, u32 *cpos_end) +{ + int ret, i, subtree_root; + u32 cpos; + u64 blkno; + struct super_block *sb = ocfs2_metadata_cache_get_super(ci); + struct ocfs2_path *left_path = NULL, *right_path = NULL; + struct ocfs2_extent_tree et; + struct ocfs2_extent_list *tmp_el; + + if (index < le16_to_cpu(el->l_next_free_rec) - 1) { + /* + * We have a extent rec after index, so just use the e_cpos + * of the next extent rec. + */ + *cpos_end = le32_to_cpu(el->l_recs[index+1].e_cpos); + return 0; + } + + if (!eb || (eb && !eb->h_next_leaf_blk)) { + /* + * We are the last extent rec, so any high cpos should + * be stored in this leaf refcount block. + */ + *cpos_end = UINT_MAX; + return 0; + } + + /* + * If the extent block isn't the last one, we have to find + * the subtree root between this extent block and the next + * leaf extent block and get the corresponding e_cpos from + * the subroot. Otherwise we may corrupt the b-tree. + */ + ocfs2_init_refcount_extent_tree(&et, ci, ref_root_bh); + + left_path = ocfs2_new_path_from_et(&et); + if (!left_path) { + ret = -ENOMEM; + mlog_errno(ret); + goto out; + } + + cpos = le32_to_cpu(eb->h_list.l_recs[index].e_cpos); + ret = ocfs2_find_path(ci, left_path, cpos); + if (ret) { + mlog_errno(ret); + goto out; + } + + right_path = ocfs2_new_path_from_path(left_path); + if (!right_path) { + ret = -ENOMEM; + mlog_errno(ret); + goto out; + } + + ret = ocfs2_find_cpos_for_right_leaf(sb, left_path, &cpos); + if (ret) { + mlog_errno(ret); + goto out; + } + + ret = ocfs2_find_path(ci, right_path, cpos); + if (ret) { + mlog_errno(ret); + goto out; + } + + subtree_root = ocfs2_find_subtree_root(&et, left_path, + right_path); + + tmp_el = left_path->p_node[subtree_root].el; + blkno = left_path->p_node[subtree_root+1].bh->b_blocknr; + for (i = 0; i < le32_to_cpu(tmp_el->l_next_free_rec); i++) { + if (le64_to_cpu(tmp_el->l_recs[i].e_blkno) == blkno) { + *cpos_end = le32_to_cpu(tmp_el->l_recs[i+1].e_cpos); + break; + } + } + + BUG_ON(i == le32_to_cpu(tmp_el->l_next_free_rec)); + +out: + ocfs2_free_path(left_path); + ocfs2_free_path(right_path); + return ret; +} + /* * Given a cpos and len, try to find the refcount record which contains cpos. * 1. If cpos can be found in one refcount record, return the record. @@ -983,10 +1080,10 @@ static int ocfs2_get_refcount_rec(struct ocfs2_caching_info *ci, struct buffer_head **ret_bh) { int ret = 0, i, found; - u32 low_cpos; + u32 low_cpos, uninitialized_var(cpos_end); struct ocfs2_extent_list *el; - struct ocfs2_extent_rec *tmp, *rec = NULL; - struct ocfs2_extent_block *eb; + struct ocfs2_extent_rec *rec = NULL; + struct ocfs2_extent_block *eb = NULL; struct buffer_head *eb_bh = NULL, *ref_leaf_bh = NULL; struct super_block *sb = ocfs2_metadata_cache_get_super(ci); struct ocfs2_refcount_block *rb = @@ -1034,12 +1131,16 @@ static int ocfs2_get_refcount_rec(struct ocfs2_caching_info *ci, } } - /* adjust len when we have ocfs2_extent_rec after it. */ - if (found && i < le16_to_cpu(el->l_next_free_rec) - 1) { - tmp = &el->l_recs[i+1]; + if (found) { + ret = ocfs2_get_refcount_cpos_end(ci, ref_root_bh, + eb, el, i, &cpos_end); + if (ret) { + mlog_errno(ret); + goto out; + } - if (le32_to_cpu(tmp->e_cpos) < cpos + len) - len = le32_to_cpu(tmp->e_cpos) - cpos; + if (cpos_end < low_cpos + len) + len = cpos_end - low_cpos; } ret = ocfs2_read_refcount_block(ci, le64_to_cpu(rec->e_blkno), -- GitLab From 12d4cec988a8a20927a9795dbf2c6d9ef2f85baa Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Mon, 30 Nov 2009 15:08:40 +0800 Subject: [PATCH 009/618] ocfs2: refcounttree.c cleanup. sparse check finds some endian problem and some other minor issues. There is an obsolete function which should be removed. So this patch resolve all these. Signed-off-by: Tao Ma Signed-off-by: Joel Becker --- fs/ocfs2/refcounttree.c | 33 ++++++++------------------------- 1 file changed, 8 insertions(+), 25 deletions(-) diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index 9c3956f24e58..c7ffba86e9c6 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -276,7 +276,7 @@ static void ocfs2_erase_refcount_tree_from_list(struct ocfs2_super *osb, spin_unlock(&osb->osb_lock); } -void ocfs2_kref_remove_refcount_tree(struct kref *kref) +static void ocfs2_kref_remove_refcount_tree(struct kref *kref) { struct ocfs2_refcount_tree *tree = container_of(kref, struct ocfs2_refcount_tree, rf_getcnt); @@ -524,23 +524,6 @@ int ocfs2_lock_refcount_tree(struct ocfs2_super *osb, return ret; } -int ocfs2_lock_refcount_tree_by_inode(struct inode *inode, int rw, - struct ocfs2_refcount_tree **ret_tree, - struct buffer_head **ref_bh) -{ - int ret; - u64 ref_blkno; - - ret = ocfs2_get_refcount_block(inode, &ref_blkno); - if (ret) { - mlog_errno(ret); - return ret; - } - - return ocfs2_lock_refcount_tree(OCFS2_SB(inode->i_sb), ref_blkno, - rw, ret_tree, ref_bh); -} - void ocfs2_unlock_refcount_tree(struct ocfs2_super *osb, struct ocfs2_refcount_tree *tree, int rw) { @@ -1519,7 +1502,7 @@ static int ocfs2_divide_leaf_refcount_block(struct buffer_head *ref_leaf_bh, /* change old and new rl_used accordingly. */ le16_add_cpu(&rl->rl_used, -num_moved); - new_rl->rl_used = cpu_to_le32(num_moved); + new_rl->rl_used = cpu_to_le16(num_moved); sort(&rl->rl_recs, le16_to_cpu(rl->rl_used), sizeof(struct ocfs2_refcount_rec), @@ -1898,7 +1881,8 @@ static int ocfs2_split_refcount_rec(handle_t *handle, recs_need++; /* If the leaf block don't have enough record, expand it. */ - if (le16_to_cpu(rf_list->rl_used) + recs_need > rf_list->rl_count) { + if (le16_to_cpu(rf_list->rl_used) + recs_need > + le16_to_cpu(rf_list->rl_count)) { struct ocfs2_refcount_rec tmp_rec; u64 cpos = le64_to_cpu(orig_rec->r_cpos); len = le32_to_cpu(orig_rec->r_clusters); @@ -1960,7 +1944,7 @@ static int ocfs2_split_refcount_rec(handle_t *handle, memcpy(tail_rec, orig_rec, sizeof(struct ocfs2_refcount_rec)); le64_add_cpu(&tail_rec->r_cpos, le32_to_cpu(tail_rec->r_clusters) - len); - tail_rec->r_clusters = le32_to_cpu(len); + tail_rec->r_clusters = cpu_to_le32(len); } /* @@ -3941,8 +3925,7 @@ static int ocfs2_add_refcounted_extent(struct inode *inode, } ret = ocfs2_insert_extent(handle, et, cpos, - cpu_to_le64(ocfs2_clusters_to_blocks(inode->i_sb, - p_cluster)), + ocfs2_clusters_to_blocks(inode->i_sb, p_cluster), num_clusters, ext_flags, meta_ac); if (ret) { mlog_errno(ret); @@ -4354,8 +4337,8 @@ static int ocfs2_user_path_parent(const char __user *path, * @new_dentry: target dentry * @preserve: if true, preserve all file attributes */ -int ocfs2_vfs_reflink(struct dentry *old_dentry, struct inode *dir, - struct dentry *new_dentry, bool preserve) +static int ocfs2_vfs_reflink(struct dentry *old_dentry, struct inode *dir, + struct dentry *new_dentry, bool preserve) { struct inode *inode = old_dentry->d_inode; int error; -- GitLab From f0e5d2c959d5f14dd3bc879c8f9390aa2c049423 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Sun, 6 Dec 2009 18:06:43 +0200 Subject: [PATCH 010/618] ARM: dove: fix the mm mmu flags of the pj4 procinfo ... to be the same as proc-v6 Signed-off-by: Saeed Bishara Signed-off-by: Nicolas Pitre --- arch/arm/mm/proc-v6.S | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 5485c821101c..395cc90c6613 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -254,10 +254,9 @@ __pj4_v6_proc_info: .long 0x560f5810 .long 0xff0ffff0 .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ + PMD_SECT_AP_READ | \ + PMD_FLAGS .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ -- GitLab From f93611fac7eed3aa175795fb8e452aa30af33b6a Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 8 Dec 2009 01:54:35 +0300 Subject: [PATCH 011/618] powerpc/fsl_pci: Fix P2P bridge handling for MPC83xx PCIe controllers It appears that we wrongly calculate dev_base for type1 config cycles. The thing is: we shouldn't subtract hose->first_busno because PCI core sets PCI primary, secondary and subordinate bus numbers, and PCIe controller actually takes the registers into account. So we should use just bus->number. Also, according to MPC8315 reference manual, primary bus number should always remain 0. We have PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS quirk in indirect_pci.c, but since 83xx is somewhat special, it doesn't use indirect_pci.c routines, so we have to implement the quirk specifically for 83xx PCIe controllers. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 4e3a3e345ab3..e1a028c1f18d 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -464,8 +464,7 @@ static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus, { struct pci_controller *hose = pci_bus_to_host(bus); struct mpc83xx_pcie_priv *pcie = hose->dn->data; - u8 bus_no = bus->number - hose->first_busno; - u32 dev_base = bus_no << 24 | devfn << 16; + u32 dev_base = bus->number << 24 | devfn << 16; int ret; ret = mpc83xx_pcie_exclude_device(bus, devfn); @@ -515,12 +514,17 @@ static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { + struct pci_controller *hose = pci_bus_to_host(bus); void __iomem *cfg_addr; cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset); if (!cfg_addr) return PCIBIOS_DEVICE_NOT_FOUND; + /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */ + if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno) + val &= 0xffffff00; + switch (len) { case 1: out_8(cfg_addr, val); -- GitLab From 196f0082d8e77f647edd21ea27b5a9bba8116396 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sun, 6 Dec 2009 12:32:47 +0100 Subject: [PATCH 012/618] powerpc/fsl: try to explain why the interrupt numbers are off by 16 Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Kumar Gala --- .../powerpc/dts-bindings/fsl/mpic.txt | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/powerpc/dts-bindings/fsl/mpic.txt diff --git a/Documentation/powerpc/dts-bindings/fsl/mpic.txt b/Documentation/powerpc/dts-bindings/fsl/mpic.txt new file mode 100644 index 000000000000..71e39cf3215b --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/mpic.txt @@ -0,0 +1,42 @@ +* OpenPIC and its interrupt numbers on Freescale's e500/e600 cores + +The OpenPIC specification does not specify which interrupt source has to +become which interrupt number. This is up to the software implementation +of the interrupt controller. The only requirement is that every +interrupt source has to have an unique interrupt number / vector number. +To accomplish this the current implementation assigns the number zero to +the first source, the number one to the second source and so on until +all interrupt sources have their unique number. +Usually the assigned vector number equals the interrupt number mentioned +in the documentation for a given core / CPU. This is however not true +for the e500 cores (MPC85XX CPUs) where the documentation distinguishes +between internal and external interrupt sources and starts counting at +zero for both of them. + +So what to write for external interrupt source X or internal interrupt +source Y into the device tree? Here is an example: + +The memory map for the interrupt controller in the MPC8544[0] shows, +that the first interrupt source starts at 0x5_0000 (PIC Register Address +Map-Interrupt Source Configuration Registers). This source becomes the +number zero therefore: + External interrupt 0 = interrupt number 0 + External interrupt 1 = interrupt number 1 + External interrupt 2 = interrupt number 2 + ... +Every interrupt number allocates 0x20 bytes register space. So to get +its number it is sufficient to shift the lower 16bits to right by five. +So for the external interrupt 10 we have: + 0x0140 >> 5 = 10 + +After the external sources, the internal sources follow. The in core I2C +controller on the MPC8544 for instance has the internal source number +27. Oo obtain its interrupt number we take the lower 16bits of its memory +address (0x5_0560) and shift it right: + 0x0560 >> 5 = 43 + +Therefore the I2C device node for the MPC8544 CPU has to have the +interrupt number 43 specified in the device tree. + +[0] MPC8544E PowerQUICCTM III, Integrated Host Processor Family Reference Manual + MPC8544ERM Rev. 1 10/2007 -- GitLab From 9174e4989ecf53eca69767229deb9ad85efd55fe Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 16 Nov 2009 16:58:51 +0300 Subject: [PATCH 013/618] powerpc/83xx: mpc8349emitx - add gpio controller declarations mpc8349 bears two GPIO controllers. Enable support for them. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emitx.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index feeeb7f9d609..16872c9a79bd 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -63,6 +63,24 @@ reg = <0x200 0x100>; }; + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>; -- GitLab From 3320cf844f3183870e66059174ce73f9662e523b Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 16 Nov 2009 16:58:52 +0300 Subject: [PATCH 014/618] powerpc/83xx: mpc8349emitx - populate I2C busses in device tree Add OF descriptions of EEPROM, two GPIO extenders and SPD hanging on I2C on this board. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emitx.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 16872c9a79bd..0fb78b20ef96 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -90,6 +90,12 @@ interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; + + eeprom: at24@50 { + compatible = "st-micro,24c256"; + reg = <0x50>; + }; + }; i2c@3100 { @@ -109,6 +115,25 @@ interrupt-parent = <&ipic>; }; + pcf1: iexp@38 { + #gpio-cells = <2>; + compatible = "ti,pcf8574a"; + reg = <0x38>; + gpio-controller; + }; + + pcf2: iexp@39 { + #gpio-cells = <2>; + compatible = "ti,pcf8574a"; + reg = <0x39>; + gpio-controller; + }; + + spd: at24@51 { + compatible = "at24,spd"; + reg = <0x51>; + }; + mcu_pio: mcu@a { #gpio-cells = <2>; compatible = "fsl,mc9s08qg8-mpc8349emitx", -- GitLab From 1d88fd11a2484b1bc0a36010781dc410446bef29 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 16 Nov 2009 23:51:20 +0300 Subject: [PATCH 015/618] powerpc/83xx: mpc8349emitx - add OF descriptions of LocalBus devices Describe all LocalBus chipselects on MPC8349E-MITX board. Also add flash bindings. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emitx.dts | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 0fb78b20ef96..346d1ba85ede 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -374,7 +374,26 @@ compatible = "fsl,mpc8349e-localbus", "fsl,pq2pro-localbus"; reg = <0xe0005000 0xd8>; - ranges = <0x3 0x0 0xf0000000 0x210>; + ranges = <0x0 0x0 0xfe000000 0x1000000 /* flash */ + 0x1 0x0 0xf8000000 0x20000 /* VSC 7385 */ + 0x2 0x0 0xf9000000 0x200000 /* exp slot */ + 0x3 0x0 0xf0000000 0x210>; /* CF slot */ + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + flash@0,800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x800000 0x800000>; + bank-width = <2>; + device-width = <1>; + }; pata@3,0 { compatible = "fsl,mpc8349emitx-pata", "ata-generic"; -- GitLab From b387dfe902c352d5be4690a135412ece4868b531 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 16 Nov 2009 16:58:54 +0300 Subject: [PATCH 016/618] powerpc/83xx: mpc8349emitx - add leds-gpio binding Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emitx.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 346d1ba85ede..b53d1df11e2d 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -318,6 +318,24 @@ reg = <0x700 0x100>; device_type = "ipic"; }; + + gpio-leds { + compatible = "gpio-leds"; + + green { + label = "Green"; + gpios = <&pcf1 0 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&pcf1 1 1>; + /* linux,default-trigger = "heartbeat"; */ + default-state = "on"; + }; + }; + }; pci0: pci@e0008500 { -- GitLab From 8e68597d087977d3e4fd3e735d290ab45fd0b5ea Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Fri, 18 Sep 2009 12:02:05 -0500 Subject: [PATCH 017/618] [SCSI] lpfc: fix hang on SGI ia64 platform In testing 2.6.31 on one of our ia64 platforms I've encountered a hang due to the driver using hardware ATEs which are a limited resource. This is because the driver does not set the dma consistent mask to 64 bits. Signed-off-by: Michael Reed Acked-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_init.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 226920d15ea1..d4da6bdd0e73 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4506,9 +4506,13 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *phba) pdev = phba->pcidev; /* Set the device DMA mask size */ - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) { return error; + } + } /* Get the bus address of Bar0 and Bar2 and the number of bytes * required by each mapping. @@ -6021,9 +6025,13 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba) pdev = phba->pcidev; /* Set the device DMA mask size */ - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) { return error; + } + } /* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the * number of bytes required by each mapping. They are actually -- GitLab From 6f4fdda41b01100cfe02afb1b84bf422cbf557d4 Mon Sep 17 00:00:00 2001 From: "Moger, Babu" Date: Wed, 4 Nov 2009 12:36:16 -0700 Subject: [PATCH 018/618] [SCSI] scsi_dh_rdac: Add two new IBM devices to rdac_dev_list This patch adds two new IBM storage devices which can use rdac device handlers. Signed-off-by: Babu Moger Signed-off-by: James Bottomley --- drivers/scsi/device_handler/scsi_dh_rdac.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 47cfe1c49c3e..1a660191a905 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -748,6 +748,8 @@ static const struct scsi_dh_devlist rdac_dev_list[] = { {"IBM", "1724"}, {"IBM", "1726"}, {"IBM", "1742"}, + {"IBM", "1745"}, + {"IBM", "1746"}, {"IBM", "1814"}, {"IBM", "1815"}, {"IBM", "1818"}, -- GitLab From d685c262083dcd5fd98b7499b22a377a3225229c Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 17 Nov 2009 13:16:37 +0530 Subject: [PATCH 019/618] [SCSI] mpt2sas: add missing initialization of scsih_cmds Internal command scsih_cmds init is included in mpt2sas_base_attach. Signed-off-by: Kashyap Desai Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 6422e258fd52..89d02401b9ec 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -3583,6 +3583,11 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) ioc->transport_cmds.status = MPT2_CMD_NOT_USED; mutex_init(&ioc->transport_cmds.mutex); + /* scsih internal command bits */ + ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->scsih_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->scsih_cmds.mutex); + /* task management internal command bits */ ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); ioc->tm_cmds.status = MPT2_CMD_NOT_USED; -- GitLab From 48de68a40aef032a2e198437f4781a83bfb938db Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 17 Nov 2009 21:25:16 -0600 Subject: [PATCH 020/618] [SCSI] fc class: fix fc_transport_init error handling If transport_class_register fails we should unregister any registered classes, or we will leak memory or other resources. I did a quick modprobe of scsi_transport_fc to test the patch. Signed-off-by: Mike Christie Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_fc.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 6531c91501be..ddfcecd5099f 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -649,11 +649,22 @@ static __init int fc_transport_init(void) return error; error = transport_class_register(&fc_vport_class); if (error) - return error; + goto unreg_host_class; error = transport_class_register(&fc_rport_class); if (error) - return error; - return transport_class_register(&fc_transport_class); + goto unreg_vport_class; + error = transport_class_register(&fc_transport_class); + if (error) + goto unreg_rport_class; + return 0; + +unreg_rport_class: + transport_class_unregister(&fc_rport_class); +unreg_vport_class: + transport_class_unregister(&fc_vport_class); +unreg_host_class: + transport_class_unregister(&fc_host_class); + return error; } static void __exit fc_transport_exit(void) -- GitLab From 729c845666be7092a52bf6fcdcf223fe4d9287a4 Mon Sep 17 00:00:00 2001 From: Anil Ravindranath Date: Fri, 20 Nov 2009 09:39:30 -0800 Subject: [PATCH 021/618] [SCSI] pmcraid: support SMI-S object model of storage pool PMC-Sierra mgmt application uses SMI-S model. According to SMI-S, the object model exposed by the SMI-S provider should show an StoragePool which contains member disks of a RAID Virtual disk and StorageVolume based on the StoragePool. But according to SMI-S, there is a possibility where StoragePool is created but StorageVolume is not yet created. To satisfy this scenario, we are trying a hidden RAID Virtual disk. The hidden RAID virtual disk will not be exposed to OS. Once a StorageVolume is created for this RAID virtual disk it is exposed. Signed-off-by: Anil Ravindranath Signed-off-by: James Bottomley --- drivers/scsi/pmcraid.c | 34 +++++++++++++++++++++++++--------- drivers/scsi/pmcraid.h | 5 ++++- 2 files changed, 29 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index 34c6b896a91b..e7d2688fbeba 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -1,7 +1,8 @@ /* * pmcraid.c -- driver for PMC Sierra MaxRAID controller adapters * - * Written By: PMC Sierra Corporation + * Written By: Anil Ravindranath + * PMC-Sierra Inc * * Copyright (C) 2008, 2009 PMC Sierra Inc * @@ -79,7 +80,7 @@ DECLARE_BITMAP(pmcraid_minor, PMCRAID_MAX_ADAPTERS); /* * Module parameters */ -MODULE_AUTHOR("PMC Sierra Corporation, anil_ravindranath@pmc-sierra.com"); +MODULE_AUTHOR("Anil Ravindranath"); MODULE_DESCRIPTION("PMC Sierra MaxRAID Controller Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(PMCRAID_DRIVER_VERSION); @@ -162,10 +163,10 @@ static int pmcraid_slave_alloc(struct scsi_device *scsi_dev) spin_lock_irqsave(&pinstance->resource_lock, lock_flags); list_for_each_entry(temp, &pinstance->used_res_q, queue) { - /* do not expose VSETs with order-ids >= 240 */ + /* do not expose VSETs with order-ids > MAX_VSET_TARGETS */ if (RES_IS_VSET(temp->cfg_entry)) { target = temp->cfg_entry.unique_flags1; - if (target >= PMCRAID_MAX_VSET_TARGETS) + if (target > PMCRAID_MAX_VSET_TARGETS) continue; bus = PMCRAID_VSET_BUS_ID; lun = 0; @@ -1210,7 +1211,7 @@ static int pmcraid_expose_resource(struct pmcraid_config_table_entry *cfgte) int retval = 0; if (cfgte->resource_type == RES_TYPE_VSET) - retval = ((cfgte->unique_flags1 & 0xFF) < 0xFE); + retval = ((cfgte->unique_flags1 & 0x80) == 0); else if (cfgte->resource_type == RES_TYPE_GSCSI) retval = (RES_BUS(cfgte->resource_address) != PMCRAID_VIRTUAL_ENCL_BUS_ID); @@ -1361,6 +1362,7 @@ static int pmcraid_notify_aen(struct pmcraid_instance *pinstance, u8 type) * Return value: * none */ + static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) { struct pmcraid_config_table_entry *cfg_entry; @@ -1368,9 +1370,10 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) struct pmcraid_cmd *cmd; struct pmcraid_cmd *cfgcmd; struct pmcraid_resource_entry *res = NULL; - u32 new_entry = 1; unsigned long lock_flags; unsigned long host_lock_flags; + u32 new_entry = 1; + u32 hidden_entry = 0; int rc; ccn_hcam = (struct pmcraid_hcam_ccn *)pinstance->ccn.hcam; @@ -1406,9 +1409,15 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) } /* If this resource is not going to be added to mid-layer, just notify - * applications and return + * applications and return. If this notification is about hiding a VSET + * resource, check if it was exposed already. */ - if (!pmcraid_expose_resource(cfg_entry)) + if (pinstance->ccn.hcam->notification_type == + NOTIFICATION_TYPE_ENTRY_CHANGED && + cfg_entry->resource_type == RES_TYPE_VSET && + cfg_entry->unique_flags1 & 0x80) { + hidden_entry = 1; + } else if (!pmcraid_expose_resource(cfg_entry)) goto out_notify_apps; spin_lock_irqsave(&pinstance->resource_lock, lock_flags); @@ -1424,6 +1433,12 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) if (new_entry) { + if (hidden_entry) { + spin_unlock_irqrestore(&pinstance->resource_lock, + lock_flags); + goto out_notify_apps; + } + /* If there are more number of resources than what driver can * manage, do not notify the applications about the CCN. Just * ignore this notifications and re-register the same HCAM @@ -1454,8 +1469,9 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) sizeof(struct pmcraid_config_table_entry)); if (pinstance->ccn.hcam->notification_type == - NOTIFICATION_TYPE_ENTRY_DELETED) { + NOTIFICATION_TYPE_ENTRY_DELETED || hidden_entry) { if (res->scsi_dev) { + res->cfg_entry.unique_flags1 &= 0x7F; res->change_detected = RES_CHANGE_DEL; res->cfg_entry.resource_handle = PMCRAID_INVALID_RES_HANDLE; diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h index 2752b56cad56..92f89d50850c 100644 --- a/drivers/scsi/pmcraid.h +++ b/drivers/scsi/pmcraid.h @@ -1,6 +1,9 @@ /* * pmcraid.h -- PMC Sierra MaxRAID controller driver header file * + * Written By: Anil Ravindranath + * PMC-Sierra Inc + * * Copyright (C) 2008, 2009 PMC Sierra Inc. * * This program is free software; you can redistribute it and/or modify @@ -106,7 +109,7 @@ #define PMCRAID_VSET_LUN_ID 0x0 #define PMCRAID_PHYS_BUS_ID 0x0 #define PMCRAID_VIRTUAL_ENCL_BUS_ID 0x8 -#define PMCRAID_MAX_VSET_TARGETS 240 +#define PMCRAID_MAX_VSET_TARGETS 0x7F #define PMCRAID_MAX_VSET_LUNS_PER_TARGET 8 #define PMCRAID_IOA_MAX_SECTORS 32767 -- GitLab From 7ec4ad0125db0222e397508c190b01c8f2b5f7cd Mon Sep 17 00:00:00 2001 From: Srinivas Date: Tue, 24 Nov 2009 20:07:39 +0530 Subject: [PATCH 022/618] [SCSI] mvsas: add support for Adaptec ASC-1045/1405 SAS/SATA HBA This is support for Adaptec ASC-1045/1405 SAS/SATA HBA on mvsas, which is based on Marvell 88SE6440 chipset. Signed-off-by: Srinivas Cc: Andy Yan Signed-off-by: James Bottomley --- drivers/scsi/mvsas/mv_init.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index c790d45876c4..cae6b2cf492f 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -657,6 +657,7 @@ static struct pci_device_id __devinitdata mvs_pci_table[] = { { PCI_VDEVICE(MARVELL, 0x9180), chip_9180 }, { PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1300), chip_1300 }, { PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1320), chip_1320 }, + { PCI_VDEVICE(ADAPTEC2, 0x0450), chip_6440 }, { } /* terminate list */ }; -- GitLab From 78b9fb6d38b1caf1c11cba5b10bb859e3cce071f Mon Sep 17 00:00:00 2001 From: Jayamohan Kallickal Date: Wed, 25 Nov 2009 01:41:37 +0530 Subject: [PATCH 023/618] [SCSI] be2iscsi: Adding support for various Async messages from chip This patch allows for future addition of various async messages from the chip. This ensures that the driver won't hit a BUG_ON if the Firmware used is newer than inbox driver and so is using latest async messages. Signed-off-by: Jayamohan Kallickal Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/be2iscsi/be_cmds.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c index 698a527d6cca..f008708f1b08 100644 --- a/drivers/scsi/be2iscsi/be_cmds.c +++ b/drivers/scsi/be2iscsi/be_cmds.c @@ -135,11 +135,15 @@ int beiscsi_process_mcc(struct beiscsi_hba *phba) while ((compl = be_mcc_compl_get(phba))) { if (compl->flags & CQE_FLAGS_ASYNC_MASK) { /* Interpret flags as an async trailer */ - BUG_ON(!is_link_state_evt(compl->flags)); + if (is_link_state_evt(compl->flags)) + /* Interpret compl as a async link evt */ + beiscsi_async_link_state_process(phba, + (struct be_async_event_link_state *) compl); + else + SE_DEBUG(DBG_LVL_1, + " Unsupported Async Event, flags" + " = 0x%08x \n", compl->flags); - /* Interpret compl as a async link evt */ - beiscsi_async_link_state_process(phba, - (struct be_async_event_link_state *) compl); } else if (compl->flags & CQE_FLAGS_COMPLETED_MASK) { status = be_mcc_compl_process(ctrl, compl); atomic_dec(&phba->ctrl.mcc_obj.q.used); -- GitLab From c982c368bb90adbd312faa05d0cfd842e9ab45a7 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Thu, 26 Nov 2009 09:24:13 +0900 Subject: [PATCH 024/618] [SCSI] st: fix mdata->page_order handling dio transfer always resets mdata->page_order to zero. It breaks high-order pages previously allocated for non-dio transfer. This patches adds reserved_page_order to st_buffer structure to save page order for non-dio transfer. http://bugzilla.kernel.org/show_bug.cgi?id=14563 When enlarge_buffer() allocates 524288 from 0, st uses six-order page allocation. So mdata->page_order is 6 and frp_seg is 2. After that, if st uses dio, sgl_map_user_pages() sets mdata->page_order to 0 for st_do_scsi(). After that, when we call normalize_buffer(), it frees only free frp_seg * PAGE_SIZE (2 * 4096) though we should free frp_seg * PAGE_SIZE << 6 (2 * 4096 << 6). So we see buffer_size is set to 516096 (524288 - 8192). Reported-by: Joachim Breuer Tested-by: Joachim Breuer Acked-by: Kai Makisara Signed-off-by: FUJITA Tomonori Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/st.c | 23 ++++++++++++----------- drivers/scsi/st.h | 1 + 2 files changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index ad59abb47722..d04ea9a6f673 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -552,13 +552,15 @@ st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd SRpnt->waiting = waiting; if (STp->buffer->do_dio) { + mdata->page_order = 0; mdata->nr_entries = STp->buffer->sg_segs; mdata->pages = STp->buffer->mapped_pages; } else { + mdata->page_order = STp->buffer->reserved_page_order; mdata->nr_entries = DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order); - STp->buffer->map_data.pages = STp->buffer->reserved_pages; - STp->buffer->map_data.offset = 0; + mdata->pages = STp->buffer->reserved_pages; + mdata->offset = 0; } memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd)); @@ -3719,7 +3721,7 @@ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dm priority |= __GFP_ZERO; if (STbuffer->frp_segs) { - order = STbuffer->map_data.page_order; + order = STbuffer->reserved_page_order; b_size = PAGE_SIZE << order; } else { for (b_size = PAGE_SIZE, order = 0; @@ -3752,7 +3754,7 @@ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dm segs++; } STbuffer->b_data = page_address(STbuffer->reserved_pages[0]); - STbuffer->map_data.page_order = order; + STbuffer->reserved_page_order = order; return 1; } @@ -3765,7 +3767,7 @@ static void clear_buffer(struct st_buffer * st_bp) for (i=0; i < st_bp->frp_segs; i++) memset(page_address(st_bp->reserved_pages[i]), 0, - PAGE_SIZE << st_bp->map_data.page_order); + PAGE_SIZE << st_bp->reserved_page_order); st_bp->cleared = 1; } @@ -3773,7 +3775,7 @@ static void clear_buffer(struct st_buffer * st_bp) /* Release the extra buffer */ static void normalize_buffer(struct st_buffer * STbuffer) { - int i, order = STbuffer->map_data.page_order; + int i, order = STbuffer->reserved_page_order; for (i = 0; i < STbuffer->frp_segs; i++) { __free_pages(STbuffer->reserved_pages[i], order); @@ -3781,7 +3783,7 @@ static void normalize_buffer(struct st_buffer * STbuffer) } STbuffer->frp_segs = 0; STbuffer->sg_segs = 0; - STbuffer->map_data.page_order = 0; + STbuffer->reserved_page_order = 0; STbuffer->map_data.offset = 0; } @@ -3791,7 +3793,7 @@ static void normalize_buffer(struct st_buffer * STbuffer) static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count) { int i, cnt, res, offset; - int length = PAGE_SIZE << st_bp->map_data.page_order; + int length = PAGE_SIZE << st_bp->reserved_page_order; for (i = 0, offset = st_bp->buffer_bytes; i < st_bp->frp_segs && offset >= length; i++) @@ -3823,7 +3825,7 @@ static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, in static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count) { int i, cnt, res, offset; - int length = PAGE_SIZE << st_bp->map_data.page_order; + int length = PAGE_SIZE << st_bp->reserved_page_order; for (i = 0, offset = st_bp->read_pointer; i < st_bp->frp_segs && offset >= length; i++) @@ -3856,7 +3858,7 @@ static void move_buffer_data(struct st_buffer * st_bp, int offset) { int src_seg, dst_seg, src_offset = 0, dst_offset; int count, total; - int length = PAGE_SIZE << st_bp->map_data.page_order; + int length = PAGE_SIZE << st_bp->reserved_page_order; if (offset == 0) return; @@ -4578,7 +4580,6 @@ static int sgl_map_user_pages(struct st_buffer *STbp, } mdata->offset = uaddr & ~PAGE_MASK; - mdata->page_order = 0; STbp->mapped_pages = pages; return nr_pages; diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h index 544dc6b1f548..f91a67c6d968 100644 --- a/drivers/scsi/st.h +++ b/drivers/scsi/st.h @@ -46,6 +46,7 @@ struct st_buffer { struct st_request *last_SRpnt; struct st_cmdstatus cmdstat; struct page **reserved_pages; + int reserved_page_order; struct page **mapped_pages; struct rq_map_data map_data; unsigned char *b_data; -- GitLab From cc9b2e9f6603190c009e5d2629ce8e3f99571346 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 26 Nov 2009 09:50:20 -0600 Subject: [PATCH 025/618] [SCSI] enclosure: fix oops while iterating enclosure_status array Based on patch originally by Jeff Mahoney enclosure_status is expected to be a NULL terminated array of strings but isn't actually NULL terminated. When writing an invalid value to /sys/class/enclosure/.../.../status, it goes off the end of the array and Oopses. Fix by making the assumption true and adding NULL at the end. Reported-by: Artur Wojcik Signed-off-by: James Bottomley --- drivers/misc/enclosure.c | 1 + include/linux/enclosure.h | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index e9eae4a78402..1eac626e710a 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -391,6 +391,7 @@ static const char *const enclosure_status [] = { [ENCLOSURE_STATUS_NOT_INSTALLED] = "not installed", [ENCLOSURE_STATUS_UNKNOWN] = "unknown", [ENCLOSURE_STATUS_UNAVAILABLE] = "unavailable", + [ENCLOSURE_STATUS_MAX] = NULL, }; static const char *const enclosure_type [] = { diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h index 90d1c2184112..9a33c5f7e126 100644 --- a/include/linux/enclosure.h +++ b/include/linux/enclosure.h @@ -42,6 +42,8 @@ enum enclosure_status { ENCLOSURE_STATUS_NOT_INSTALLED, ENCLOSURE_STATUS_UNKNOWN, ENCLOSURE_STATUS_UNAVAILABLE, + /* last element for counting purposes */ + ENCLOSURE_STATUS_MAX }; /* SFF-8485 activity light settings */ -- GitLab From e339c1a7c09ef736dca7b3a4353c7742557d9f8f Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Thu, 26 Nov 2009 12:00:40 -0500 Subject: [PATCH 026/618] [SCSI] sd: WRITE SAME(16) / UNMAP support Implement a function for handling discard requests that sends either WRITE SAME(16) or UNMAP(10) depending on parameters indicated by the device in the block limits VPD. Extract unmap constraints and report them to the block layer. Based in part by a patch by Christoph Hellwig . Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 107 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/sd.h | 2 + 2 files changed, 109 insertions(+) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 9093c7261f33..255da53e5a01 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -264,6 +264,15 @@ sd_show_app_tag_own(struct device *dev, struct device_attribute *attr, return snprintf(buf, 20, "%u\n", sdkp->ATO); } +static ssize_t +sd_show_thin_provisioning(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_disk *sdkp = to_scsi_disk(dev); + + return snprintf(buf, 20, "%u\n", sdkp->thin_provisioning); +} + static struct device_attribute sd_disk_attrs[] = { __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type, sd_store_cache_type), @@ -274,6 +283,7 @@ static struct device_attribute sd_disk_attrs[] = { sd_store_manage_start_stop), __ATTR(protection_type, S_IRUGO, sd_show_protection_type, NULL), __ATTR(app_tag_own, S_IRUGO, sd_show_app_tag_own, NULL), + __ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL), __ATTR_NULL, }; @@ -398,6 +408,57 @@ static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif) scsi_set_prot_type(scmd, dif); } +/** + * sd_prepare_discard - unmap blocks on thinly provisioned device + * @rq: Request to prepare + * + * Will issue either UNMAP or WRITE SAME(16) depending on preference + * indicated by target device. + **/ +static int sd_prepare_discard(struct request *rq) +{ + struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); + struct bio *bio = rq->bio; + sector_t sector = bio->bi_sector; + unsigned int num = bio_sectors(bio); + + if (sdkp->device->sector_size == 4096) { + sector >>= 3; + num >>= 3; + } + + rq->cmd_type = REQ_TYPE_BLOCK_PC; + rq->timeout = SD_TIMEOUT; + + memset(rq->cmd, 0, rq->cmd_len); + + if (sdkp->unmap) { + char *buf = kmap_atomic(bio_page(bio), KM_USER0); + + rq->cmd[0] = UNMAP; + rq->cmd[8] = 24; + rq->cmd_len = 10; + + /* Ensure that data length matches payload */ + rq->__data_len = bio->bi_size = bio->bi_io_vec->bv_len = 24; + + put_unaligned_be16(6 + 16, &buf[0]); + put_unaligned_be16(16, &buf[2]); + put_unaligned_be64(sector, &buf[8]); + put_unaligned_be32(num, &buf[16]); + + kunmap_atomic(buf, KM_USER0); + } else { + rq->cmd[0] = WRITE_SAME_16; + rq->cmd[1] = 0x8; /* UNMAP */ + put_unaligned_be64(sector, &rq->cmd[2]); + put_unaligned_be32(num, &rq->cmd[10]); + rq->cmd_len = 16; + } + + return BLKPREP_OK; +} + /** * sd_init_command - build a scsi (read or write) command from * information in the request structure. @@ -418,6 +479,13 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) int ret, host_dif; unsigned char protect; + /* + * Discard request come in as REQ_TYPE_FS but we turn them into + * block PC requests to make life easier. + */ + if (blk_discard_rq(rq)) + ret = sd_prepare_discard(rq); + if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { ret = scsi_setup_blk_pc_cmnd(sdp, rq); goto out; @@ -1432,6 +1500,19 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, sd_printk(KERN_NOTICE, sdkp, "physical block alignment offset: %u\n", alignment); + if (buffer[14] & 0x80) { /* TPE */ + struct request_queue *q = sdp->request_queue; + + sdkp->thin_provisioning = 1; + q->limits.discard_granularity = sdkp->hw_sector_size; + q->limits.max_discard_sectors = 0xffffffff; + + if (buffer[14] & 0x40) /* TPRZ */ + q->limits.discard_zeroes_data = 1; + + queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); + } + sdkp->capacity = lba + 1; return sector_size; } @@ -1863,6 +1944,7 @@ void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer) */ static void sd_read_block_limits(struct scsi_disk *sdkp) { + struct request_queue *q = sdkp->disk->queue; unsigned int sector_sz = sdkp->device->sector_size; char *buffer; @@ -1877,6 +1959,31 @@ static void sd_read_block_limits(struct scsi_disk *sdkp) blk_queue_io_opt(sdkp->disk->queue, get_unaligned_be32(&buffer[12]) * sector_sz); + /* Thin provisioning enabled and page length indicates TP support */ + if (sdkp->thin_provisioning && buffer[3] == 0x3c) { + unsigned int lba_count, desc_count, granularity; + + lba_count = get_unaligned_be32(&buffer[20]); + desc_count = get_unaligned_be32(&buffer[24]); + + if (lba_count) { + q->limits.max_discard_sectors = + lba_count * sector_sz >> 9; + + if (desc_count) + sdkp->unmap = 1; + } + + granularity = get_unaligned_be32(&buffer[28]); + + if (granularity) + q->limits.discard_granularity = granularity * sector_sz; + + if (buffer[32] & 0x80) + q->limits.discard_alignment = + get_unaligned_be32(&buffer[32]) & ~(1 << 31); + } + kfree(buffer); } diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index e374804d26fb..43d3caf268ef 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -60,6 +60,8 @@ struct scsi_disk { unsigned RCD : 1; /* state of disk RCD bit, unused */ unsigned DPOFUA : 1; /* state of disk DPOFUA bit */ unsigned first_scan : 1; + unsigned thin_provisioning : 1; + unsigned unmap : 1; }; #define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev) -- GitLab From d8705f11d89cfabf4a9f0ea234d4809b22abb33e Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Thu, 26 Nov 2009 12:00:41 -0500 Subject: [PATCH 027/618] [SCSI] Correctly handle thin provisioning write error A thin provisioned device may temporarily be out of sufficient allocation units to fulfill a write request. In that case it will return a space allocation in progress error. Wait a bit and retry the write. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index e495d3813948..d8927681ec88 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -859,6 +859,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) case 0x07: /* operation in progress */ case 0x08: /* Long write in progress */ case 0x09: /* self test in progress */ + case 0x14: /* space allocation in progress */ action = ACTION_DELAYED_RETRY; break; default: -- GitLab From aeab3fd7b865bc4086a80a83cfdd67dded3b41a0 Mon Sep 17 00:00:00 2001 From: Noriyuki Fujii Date: Fri, 20 Nov 2009 16:27:20 +0900 Subject: [PATCH 028/618] [SCSI] megaraid_sas: make driver PCI legacy I/O port free driver On the large servers, I/O port resource may not be assigned to all the PCI devices since it is limited (to 64KB on Intel Architecture[1]) and it may also be fragmented (I/O base register of PCI-to-PCI bridge will usually be aligned to a 4KB boundary[2]). If no I/O port resource is assigned to devices, those devices do not work. [1] Some machines support 64KB I/O port space per PCI segment. [2] Some P2P bridges support optional 1KB aligned I/O base. Therefore, I made a patch for MegaRAID SAS driver to make PCI legacy I/O port free. I have also tested the patch and it had no problem. The way to make PCI legacy I/O port free is the same as Fusion-MPT driver's and it has been merged into 2.6.30.4. This has already been fixed in e1000 and lpfc. As a result of the above, the driver can handle its device even when there are a huge number of PCI devices being used on the system and no I/O port region assigned to the device. Signed-off-by: Noriyuki Fujii Acked-by: "Yang, Bo" Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 134c63ef6d38..99ff99e45bee 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -2501,7 +2501,9 @@ static int megasas_init_mfi(struct megasas_instance *instance) instance->base_addr = pci_resource_start(instance->pdev, 0); } - if (pci_request_regions(instance->pdev, "megasas: LSI")) { + if (pci_request_selected_regions(instance->pdev, + pci_select_bars(instance->pdev, IORESOURCE_MEM), + "megasas: LSI")) { printk(KERN_DEBUG "megasas: IO memory region busy!\n"); return -EBUSY; } @@ -2642,7 +2644,8 @@ static int megasas_init_mfi(struct megasas_instance *instance) iounmap(instance->reg_set); fail_ioremap: - pci_release_regions(instance->pdev); + pci_release_selected_regions(instance->pdev, + pci_select_bars(instance->pdev, IORESOURCE_MEM)); return -EINVAL; } @@ -2662,7 +2665,8 @@ static void megasas_release_mfi(struct megasas_instance *instance) iounmap(instance->reg_set); - pci_release_regions(instance->pdev); + pci_release_selected_regions(instance->pdev, + pci_select_bars(instance->pdev, IORESOURCE_MEM)); } /** @@ -2971,7 +2975,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* * PCI prepping: enable device set bus mastering and dma mask */ - rval = pci_enable_device(pdev); + rval = pci_enable_device_mem(pdev); if (rval) { return rval; @@ -3276,7 +3280,7 @@ megasas_resume(struct pci_dev *pdev) /* * PCI prepping: enable device set bus mastering and dma mask */ - rval = pci_enable_device(pdev); + rval = pci_enable_device_mem(pdev); if (rval) { printk(KERN_ERR "megasas: Enable device failed\n"); -- GitLab From 5d0961fd1f25e117f907f3af3aaa870637049252 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Tue, 1 Dec 2009 17:36:21 +0200 Subject: [PATCH 029/618] [SCSI] libosd: Fix blk_put_request locking again So libosd has decided to sacrifice some code simplicity for the sake of a clean API. One of these things is the possibility for users to call osd_end_request, in any condition at any state. This opens up some problems with calling blk_put_request when out-side of the completion callback but calling __blk_put_request when detecting a from-completion state. The current hack was working just fine until exofs decided to operate on all devices in parallel and wait for the sum of the requests, before deallocating all osd-requests at once. There are two new possible cases 1. All request in a group are deallocated as part of the last request's async-done, request_queue is locked. 2. All request in a group where executed asynchronously, but de-allocation was delayed to after the async-done, in the context of another thread. Async execution but request_queue is not locked. The solution I chose was to separate the deallocation of the osd_request which has the information users need, from the deallocation of the internal(2) requests which impose the locking problem. The internal block-requests are freed unconditionally inside the async-done-callback, when we know the queue is always locked. If at osd_end_request time we still have a bock-request, then we know it did not come from within an async-done-callback and we can call the regular blk_put_request. The internal requests were used for carrying error information after execution. This information is now copied to osd_request members for later analysis by user code. The external API and behaviour was unchanged, except now it really supports what was previously advertised. Reported-by: Vineet Agarwal Signed-off-by: Boaz Harrosh Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/osd/osd_initiator.c | 88 +++++++++++++++++--------------- include/scsi/osd_initiator.h | 5 +- 2 files changed, 50 insertions(+), 43 deletions(-) diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 950202a70bcf..24223473f573 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -432,30 +432,23 @@ static void _osd_free_seg(struct osd_request *or __unused, seg->alloc_size = 0; } -static void _put_request(struct request *rq , bool is_async) +static void _put_request(struct request *rq) { - if (is_async) { - WARN_ON(rq->bio); - __blk_put_request(rq->q, rq); - } else { - /* - * If osd_finalize_request() was called but the request was not - * executed through the block layer, then we must release BIOs. - * TODO: Keep error code in or->async_error. Need to audit all - * code paths. - */ - if (unlikely(rq->bio)) - blk_end_request(rq, -ENOMEM, blk_rq_bytes(rq)); - else - blk_put_request(rq); - } + /* + * If osd_finalize_request() was called but the request was not + * executed through the block layer, then we must release BIOs. + * TODO: Keep error code in or->async_error. Need to audit all + * code paths. + */ + if (unlikely(rq->bio)) + blk_end_request(rq, -ENOMEM, blk_rq_bytes(rq)); + else + blk_put_request(rq); } void osd_end_request(struct osd_request *or) { struct request *rq = or->request; - /* IMPORTANT: make sure this agrees with osd_execute_request_async */ - bool is_async = (or->request->end_io_data == or); _osd_free_seg(or, &or->set_attr); _osd_free_seg(or, &or->enc_get_attr); @@ -463,20 +456,34 @@ void osd_end_request(struct osd_request *or) if (rq) { if (rq->next_rq) { - _put_request(rq->next_rq, is_async); + _put_request(rq->next_rq); rq->next_rq = NULL; } - _put_request(rq, is_async); + _put_request(rq); } _osd_request_free(or); } EXPORT_SYMBOL(osd_end_request); +static void _set_error_resid(struct osd_request *or, struct request *req, + int error) +{ + or->async_error = error; + or->req_errors = req->errors ? : error; + or->sense_len = req->sense_len; + if (or->out.req) + or->out.residual = or->out.req->resid_len; + if (or->in.req) + or->in.residual = or->in.req->resid_len; +} + int osd_execute_request(struct osd_request *or) { - return or->async_error = - blk_execute_rq(or->request->q, NULL, or->request, 0); + int error = blk_execute_rq(or->request->q, NULL, or->request, 0); + + _set_error_resid(or, or->request, error); + return error; } EXPORT_SYMBOL(osd_execute_request); @@ -484,15 +491,17 @@ static void osd_request_async_done(struct request *req, int error) { struct osd_request *or = req->end_io_data; - or->async_error = error; - - if (unlikely(error)) { - OSD_DEBUG("osd_request_async_done error recieved %d " - "errors 0x%x\n", error, req->errors); - if (!req->errors) /* don't miss out on this one */ - req->errors = error; + _set_error_resid(or, req, error); + if (req->next_rq) { + __blk_put_request(req->q, req->next_rq); + req->next_rq = NULL; } + __blk_put_request(req->q, req); + or->request = NULL; + or->in.req = NULL; + or->out.req = NULL; + if (or->async_done) or->async_done(or, or->async_private); else @@ -1489,21 +1498,18 @@ int osd_req_decode_sense_full(struct osd_request *or, #endif int ret; - if (likely(!or->request->errors)) { - osi->out_resid = 0; - osi->in_resid = 0; + if (likely(!or->req_errors)) return 0; - } osi = osi ? : &local_osi; memset(osi, 0, sizeof(*osi)); - ssdb = or->request->sense; - sense_len = or->request->sense_len; + ssdb = (typeof(ssdb))or->sense; + sense_len = or->sense_len; if ((sense_len < (int)sizeof(*ssdb) || !ssdb->sense_key)) { OSD_ERR("Block-layer returned error(0x%x) but " "sense_len(%u) || key(%d) is empty\n", - or->request->errors, sense_len, ssdb->sense_key); + or->req_errors, sense_len, ssdb->sense_key); goto analyze; } @@ -1525,7 +1531,7 @@ int osd_req_decode_sense_full(struct osd_request *or, "additional_code=0x%x async_error=%d errors=0x%x\n", osi->key, original_sense_len, sense_len, osi->additional_code, or->async_error, - or->request->errors); + or->req_errors); if (original_sense_len < sense_len) sense_len = original_sense_len; @@ -1695,10 +1701,10 @@ int osd_req_decode_sense_full(struct osd_request *or, ret = -EIO; } - if (or->out.req) - osi->out_resid = or->out.req->resid_len ?: or->out.total_bytes; - if (or->in.req) - osi->in_resid = or->in.req->resid_len ?: or->in.total_bytes; + if (!or->out.residual) + or->out.residual = or->out.total_bytes; + if (!or->in.residual) + or->in.residual = or->in.total_bytes; return ret; } diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h index 39d6d1097153..a8f370126632 100644 --- a/include/scsi/osd_initiator.h +++ b/include/scsi/osd_initiator.h @@ -142,6 +142,7 @@ struct osd_request { struct _osd_io_info { struct bio *bio; u64 total_bytes; + u64 residual; struct request *req; struct _osd_req_data_segment *last_seg; u8 *pad_buff; @@ -150,12 +151,14 @@ struct osd_request { gfp_t alloc_flags; unsigned timeout; unsigned retries; + unsigned sense_len; u8 sense[OSD_MAX_SENSE_LEN]; enum osd_attributes_mode attributes_mode; osd_req_done_fn *async_done; void *async_private; int async_error; + int req_errors; }; static inline bool osd_req_is_ver1(struct osd_request *or) @@ -297,8 +300,6 @@ enum osd_err_priority { }; struct osd_sense_info { - u64 out_resid; /* Zero on success otherwise out residual */ - u64 in_resid; /* Zero on success otherwise in residual */ enum osd_err_priority osd_err_pri; int key; /* one of enum scsi_sense_keys */ -- GitLab From 1486400f7edd009d49550da968d5744e246dc7f8 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Wed, 2 Dec 2009 09:11:16 -0600 Subject: [PATCH 030/618] [SCSI] qla2xxx: dpc thread can execute before scsi host has been added Fix crash in qla2x00_fdmi_register() due to the dpc thread executing before the scsi host has been fully added. Unable to handle kernel NULL pointer dereference (address 00000000000001d0) qla2xxx_7_dpc[4140]: Oops 8813272891392 [1] Call Trace: [] show_stack+0x50/0xa0 sp=e00000b07c59f930 bsp=e00000b07c591400 [] show_regs+0x820/0x860 sp=e00000b07c59fb00 bsp=e00000b07c5913a0 [] die+0x1a0/0x2e0 sp=e00000b07c59fb00 bsp=e00000b07c591360 [] ia64_do_page_fault+0x8c0/0x9e0 sp=e00000b07c59fb00 bsp=e00000b07c591310 [] ia64_native_leave_kernel+0x0/0x270 sp=e00000b07c59fb90 bsp=e00000b07c591310 [] qla2x00_fdmi_register+0x850/0xbe0 [qla2xxx] sp=e00000b07c59fd60 bsp=e00000b07c591290 [] qla2x00_configure_loop+0x1930/0x34c0 [qla2xxx] sp=e00000b07c59fd60 bsp=e00000b07c591128 [] qla2x00_loop_resync+0x1b0/0x2e0 [qla2xxx] sp=e00000b07c59fdf0 bsp=e00000b07c5910c0 [] qla2x00_do_dpc+0x9a0/0xce0 [qla2xxx] sp=e00000b07c59fdf0 bsp=e00000b07c590fa0 [] kthread+0x110/0x140 sp=e00000b07c59fe00 bsp=e00000b07c590f68 [] kernel_thread_helper+0xd0/0x100 sp=e00000b07c59fe30 bsp=e00000b07c590f40 [] start_kernel_thread+0x20/0x40 sp=e00000b07c59fe30 bsp=e00000b07c590f40 crash> dis a000000207197350 0xa000000207197350 : [MMI] ld1 r45=[r14];; crash> scsi_qla_host.host 0xe00000b058c73ff8 host = 0xe00000b058c73be0, crash> Scsi_Host.shost_data 0xe00000b058c73be0 shost_data = 0x0, <<<<<<<<<<< The fc_transport fc_* workqueue threads have yet to be created. crash> ps | grep _7 3891 2 2 e00000b075c80000 IN 0.0 0 0 [scsi_eh_7] 4140 2 3 e00000b07c590000 RU 0.0 0 0 [qla2xxx_7_dpc] The thread creating adding the Scsi_Host is blocked due to other activity in sysfs. crash> bt 3762 PID: 3762 TASK: e00000b071e70000 CPU: 3 COMMAND: "modprobe" #0 [BSP:e00000b071e71548] schedule at a000000100727e00 #1 [BSP:e00000b071e714c8] __mutex_lock_slowpath at a0000001007295a0 #2 [BSP:e00000b071e714a8] mutex_lock at a000000100729830 #3 [BSP:e00000b071e71478] sysfs_addrm_start at a0000001002584f0 #4 [BSP:e00000b071e71440] create_dir at a000000100259350 #5 [BSP:e00000b071e71410] sysfs_create_subdir at a000000100259510 #6 [BSP:e00000b071e713b0] internal_create_group at a00000010025c880 #7 [BSP:e00000b071e71388] sysfs_create_group at a00000010025cc50 #8 [BSP:e00000b071e71368] dpm_sysfs_add at a000000100425050 #9 [BSP:e00000b071e71310] device_add at a000000100417d90 #10 [BSP:e00000b071e712d8] scsi_add_host at a00000010045a380 #11 [BSP:e00000b071e71268] qla2x00_probe_one at a0000002071be950 #12 [BSP:e00000b071e71248] local_pci_probe at a00000010032e490 #13 [BSP:e00000b071e71218] pci_device_probe at a00000010032ecd0 #14 [BSP:e00000b071e711d8] driver_probe_device at a00000010041d480 #15 [BSP:e00000b071e711a8] __driver_attach at a00000010041d6e0 #16 [BSP:e00000b071e71170] bus_for_each_dev at a00000010041c240 #17 [BSP:e00000b071e71150] driver_attach at a00000010041d0a0 #18 [BSP:e00000b071e71108] bus_add_driver at a00000010041b080 #19 [BSP:e00000b071e710c0] driver_register at a00000010041dea0 #20 [BSP:e00000b071e71088] __pci_register_driver at a00000010032f610 #21 [BSP:e00000b071e71058] (unknown) at a000000207200270 #22 [BSP:e00000b071e71018] do_one_initcall at a00000010000a9c0 #23 [BSP:e00000b071e70f98] sys_init_module at a0000001000fef00 #24 [BSP:e00000b071e70f98] ia64_ret_from_syscall at a00000010000c740 So, it appears that qla2xxx dpc thread is moving forward before the scsi host has been completely added. This patch moves the setting of the init_done (and online) flag to after the call to scsi_add_host() to hold off the dpc thread. Found via large lun count testing using 2.6.31. Signed-off-by: Michael Reed Acked-by: Giridhar Malavali Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 41669357b186..58edc0deb74b 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2003,13 +2003,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n", base_vha->host_no, ha)); - base_vha->flags.init_done = 1; - base_vha->flags.online = 1; - ret = scsi_add_host(host, &pdev->dev); if (ret) goto probe_failed; + base_vha->flags.init_done = 1; + base_vha->flags.online = 1; + ha->isp_ops->enable_intrs(ha); scsi_scan_host(host); -- GitLab From c45dd30551c371cb1e7a742136b8b36f6aba63f8 Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Wed, 2 Dec 2009 10:36:54 -0800 Subject: [PATCH 031/618] [SCSI] qla2xxx: Queue depth ramp up/down modification changes. Removed the module parameters ql2xqfulltracking and ql2xqfullrampup since the queue depth ramp up/down functionality is moved to scsi-ml. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 3 -- drivers/scsi/qla2xxx/qla_gbl.h | 2 - drivers/scsi/qla2xxx/qla_isr.c | 92 ---------------------------------- drivers/scsi/qla2xxx/qla_os.c | 69 ++++++++++++++++++------- 4 files changed, 51 insertions(+), 115 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 6b9bf23c7735..7a81e988fffe 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -1570,9 +1570,6 @@ typedef struct fc_port { struct fc_rport *rport, *drport; u32 supported_classes; - unsigned long last_queue_full; - unsigned long last_ramp_up; - uint16_t vp_idx; } fc_port_t; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index e21851358509..0b6801fc6389 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -72,8 +72,6 @@ extern int ql2xloginretrycount; extern int ql2xfdmienable; extern int ql2xallocfwdump; extern int ql2xextended_error_logging; -extern int ql2xqfullrampup; -extern int ql2xqfulltracking; extern int ql2xiidmaenable; extern int ql2xmaxqueues; extern int ql2xmultique_tag; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 804987397b77..bc07d8392ac3 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -811,78 +811,6 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb) qla2x00_alert_all_vps(rsp, mb); } -static void -qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, void *data) -{ - fc_port_t *fcport = data; - struct scsi_qla_host *vha = fcport->vha; - struct qla_hw_data *ha = vha->hw; - struct req_que *req = NULL; - - if (!ql2xqfulltracking) - return; - - req = vha->req; - if (!req) - return; - if (req->max_q_depth <= sdev->queue_depth) - return; - - if (sdev->ordered_tags) - scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, - sdev->queue_depth + 1); - else - scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, - sdev->queue_depth + 1); - - fcport->last_ramp_up = jiffies; - - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n", - fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun, - sdev->queue_depth)); -} - -static void -qla2x00_adjust_sdev_qdepth_down(struct scsi_device *sdev, void *data) -{ - fc_port_t *fcport = data; - - if (!scsi_track_queue_full(sdev, sdev->queue_depth - 1)) - return; - - DEBUG2(qla_printk(KERN_INFO, fcport->vha->hw, - "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n", - fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun, - sdev->queue_depth)); -} - -static inline void -qla2x00_ramp_up_queue_depth(scsi_qla_host_t *vha, struct req_que *req, - srb_t *sp) -{ - fc_port_t *fcport; - struct scsi_device *sdev; - - if (!ql2xqfulltracking) - return; - - sdev = sp->cmd->device; - if (sdev->queue_depth >= req->max_q_depth) - return; - - fcport = sp->fcport; - if (time_before(jiffies, - fcport->last_ramp_up + ql2xqfullrampup * HZ)) - return; - if (time_before(jiffies, - fcport->last_queue_full + ql2xqfullrampup * HZ)) - return; - - starget_for_each_device(sdev->sdev_target, fcport, - qla2x00_adjust_sdev_qdepth_up); -} - /** * qla2x00_process_completed_request() - Process a Fast Post response. * @ha: SCSI driver HA context @@ -913,8 +841,6 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha, /* Save ISP completion status */ sp->cmd->result = DID_OK << 16; - - qla2x00_ramp_up_queue_depth(vha, req, sp); qla2x00_sp_compl(ha, sp); } else { DEBUG2(printk("scsi(%ld) Req:%d: Invalid ISP SCSI completion" @@ -1435,13 +1361,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) "scsi(%ld): QUEUE FULL status detected " "0x%x-0x%x.\n", vha->host_no, comp_status, scsi_status)); - - /* Adjust queue depth for all luns on the port. */ - if (!ql2xqfulltracking) - break; - fcport->last_queue_full = jiffies; - starget_for_each_device(cp->device->sdev_target, - fcport, qla2x00_adjust_sdev_qdepth_down); break; } if (lscsi_status != SS_CHECK_CONDITION) @@ -1516,17 +1435,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) "scsi(%ld): QUEUE FULL status detected " "0x%x-0x%x.\n", vha->host_no, comp_status, scsi_status)); - - /* - * Adjust queue depth for all luns on the - * port. - */ - if (!ql2xqfulltracking) - break; - fcport->last_queue_full = jiffies; - starget_for_each_device( - cp->device->sdev_target, fcport, - qla2x00_adjust_sdev_qdepth_down); break; } if (lscsi_status != SS_CHECK_CONDITION) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 58edc0deb74b..2f873d237325 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -78,21 +78,6 @@ module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xmaxqdepth, "Maximum queue depth to report for target devices."); -int ql2xqfulltracking = 1; -module_param(ql2xqfulltracking, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(ql2xqfulltracking, - "Controls whether the driver tracks queue full status " - "returns and dynamically adjusts a scsi device's queue " - "depth. Default is 1, perform tracking. Set to 0 to " - "disable dynamic tracking and adjustment of queue depth."); - -int ql2xqfullrampup = 120; -module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(ql2xqfullrampup, - "Number of seconds to wait to begin to ramp-up the queue " - "depth for a device after a queue-full condition has been " - "detected. Default is 120 seconds."); - int ql2xiidmaenable=1; module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xiidmaenable, @@ -1217,13 +1202,61 @@ qla2xxx_slave_destroy(struct scsi_device *sdev) sdev->hostdata = NULL; } +static void qla2x00_handle_queue_full(struct scsi_device *sdev, int qdepth) +{ + fc_port_t *fcport = (struct fc_port *) sdev->hostdata; + + if (!scsi_track_queue_full(sdev, qdepth)) + return; + + DEBUG2(qla_printk(KERN_INFO, fcport->vha->hw, + "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n", + fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun, + sdev->queue_depth)); +} + +static void qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, int qdepth) +{ + fc_port_t *fcport = sdev->hostdata; + struct scsi_qla_host *vha = fcport->vha; + struct qla_hw_data *ha = vha->hw; + struct req_que *req = NULL; + + req = vha->req; + if (!req) + return; + + if (req->max_q_depth <= sdev->queue_depth || req->max_q_depth < qdepth) + return; + + if (sdev->ordered_tags) + scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, qdepth); + else + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, qdepth); + + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n", + fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun, + sdev->queue_depth)); +} + static int qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason) { - if (reason != SCSI_QDEPTH_DEFAULT) - return -EOPNOTSUPP; + switch (reason) { + case SCSI_QDEPTH_DEFAULT: + scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); + break; + case SCSI_QDEPTH_QFULL: + qla2x00_handle_queue_full(sdev, qdepth); + break; + case SCSI_QDEPTH_RAMP_UP: + qla2x00_adjust_sdev_qdepth_up(sdev, qdepth); + break; + default: + return EOPNOTSUPP; + } - scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); return sdev->queue_depth; } -- GitLab From 3155754a6b7985a80c41d84dd06530ff543f52a8 Mon Sep 17 00:00:00 2001 From: Anirban Chakraborty Date: Wed, 2 Dec 2009 10:36:55 -0800 Subject: [PATCH 032/618] [SCSI] qla2xxx: fix for multiqueue in MISX disabled case Fix to accommodate a hardware bug in multiqueue mode that does not work properly when acknowledgement of MSIX Interrupts is disabled. Signed-off-by: Anirban Chakraborty Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 2 ++ drivers/scsi/qla2xxx/qla_init.c | 12 +++++++++++- drivers/scsi/qla2xxx/qla_isr.c | 11 ++++++++++- drivers/scsi/qla2xxx/qla_mid.c | 4 ++++ 4 files changed, 27 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 7a81e988fffe..384afda7dbe9 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2262,6 +2262,7 @@ struct qla_hw_data { uint32_t port0 :1; uint32_t running_gold_fw :1; uint32_t cpu_affinity_enabled :1; + uint32_t disable_msix_handshake :1; } flags; /* This spinlock is used to protect "io transactions", you must @@ -2384,6 +2385,7 @@ struct qla_hw_data { #define IS_QLA81XX(ha) (IS_QLA8001(ha)) #define IS_QLA2XXX_MIDTYPE(ha) (IS_QLA24XX(ha) || IS_QLA84XX(ha) || \ IS_QLA25XX(ha) || IS_QLA81XX(ha)) +#define IS_MSIX_NACK_CAPABLE(ha) (IS_QLA81XX(ha)) #define IS_NOPOLLING_TYPE(ha) ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && \ (ha)->flags.msix_enabled) #define IS_FAC_REQUIRED(ha) (IS_QLA81XX(ha)) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index b74924b279ef..73a793539d45 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1442,7 +1442,17 @@ qla24xx_config_rings(struct scsi_qla_host *vha) icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_18); - icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22); + /* Use Disable MSIX Handshake mode for capable adapters */ + if (IS_MSIX_NACK_CAPABLE(ha)) { + icb->firmware_options_2 &= + __constant_cpu_to_le32(~BIT_22); + ha->flags.disable_msix_handshake = 1; + qla_printk(KERN_INFO, ha, + "MSIX Handshake Disable Mode turned on\n"); + } else { + icb->firmware_options_2 |= + __constant_cpu_to_le32(BIT_22); + } icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23); WRT_REG_DWORD(®->isp25mq.req_q_in, 0); diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index bc07d8392ac3..1692a883f4de 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1928,7 +1928,7 @@ qla24xx_msix_rsp_q(int irq, void *dev_id) vha = qla25xx_get_host(rsp); qla24xx_process_response_queue(vha, rsp); - if (!ha->mqenable) { + if (!ha->flags.disable_msix_handshake) { WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); RD_REG_DWORD_RELAXED(®->hccr); } @@ -1942,6 +1942,7 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) { struct qla_hw_data *ha; struct rsp_que *rsp; + struct device_reg_24xx __iomem *reg; rsp = (struct rsp_que *) dev_id; if (!rsp) { @@ -1951,6 +1952,14 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) } ha = rsp->hw; + /* Clear the interrupt, if enabled, for this response queue */ + if (rsp->options & ~BIT_6) { + reg = &ha->iobase->isp24; + spin_lock_irq(&ha->hardware_lock); + WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); + RD_REG_DWORD_RELAXED(®->hccr); + spin_unlock_irq(&ha->hardware_lock); + } queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work); return IRQ_HANDLED; diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index a47d34308a3a..2a4c7f4e7b69 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -696,6 +696,10 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options, /* Use alternate PCI devfn */ if (LSB(rsp->rid)) options |= BIT_5; + /* Enable MSIX handshake mode on for uncapable adapters */ + if (!IS_MSIX_NACK_CAPABLE(ha)) + options |= BIT_6; + rsp->options = options; rsp->id = que_id; reg = ISP_QUE_REG(ha, que_id); -- GitLab From 7729cb785d27afef500cc7e7071de8c01d7dfdae Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Wed, 2 Dec 2009 10:36:56 -0800 Subject: [PATCH 033/618] [SCSI] qla2xxx: Update version number to 8.03.01-k8. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 807e0dbc67fa..c482220f7eed 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.01-k7" +#define QLA2XXX_VERSION "8.03.01-k8" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 -- GitLab From e46b63b37c3296f0aca92d8b62bbf130f2bec7dd Mon Sep 17 00:00:00 2001 From: Pravin Bathija Date: Wed, 2 Dec 2009 17:51:46 -0800 Subject: [PATCH 034/618] [SCSI] mpt fusion: Fix 32 bit platforms with 64 bit resources. Powerpc 44x uses 36 bit real address while the real address defined in MPT Fusion driver is of type 32 bit. This causes ioremap to fail and driver fails to initialize. This fix changes the data types representing the real address from unsigned long 32-bit types to resource_size_t which is 64-bit. The driver has been tested, the disks get discovered correctly and can do IO. [jejb: added printk fix for resource_size_t object] Signed-off-by: Pravin Bathija Acked-by: "Desai, Kashyap" Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 610e914abe6c..85bc6a685e36 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1587,7 +1587,7 @@ mpt_mapresources(MPT_ADAPTER *ioc) { u8 __iomem *mem; int ii; - unsigned long mem_phys; + resource_size_t mem_phys; unsigned long port; u32 msize; u32 psize; @@ -1677,8 +1677,8 @@ mpt_mapresources(MPT_ADAPTER *ioc) return -EINVAL; } ioc->memmap = mem; - dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %lx\n", - ioc->name, mem, mem_phys)); + dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n", + ioc->name, mem, (unsigned long long)mem_phys)); ioc->mem_phys = mem_phys; ioc->chip = (SYSIF_REGS __iomem *)mem; -- GitLab From dcece412da92aa619c0d891a17306b9adf86ab0e Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 20 Nov 2009 15:22:21 -0800 Subject: [PATCH 035/618] [SCSI] fcoe: Use LLD's WWPN and WWNN for lport if LLD supports ndo_fcoe_get_wwn If the LLD wants its own WWNN/WWPN to be used, it should implement the netdev_ops.ndo_fcoe_get_wwn(). If that is the case, we query the LLD and use the queried WWNN/WWPN from the LLD. Signed-off-by: Yi Zou Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index a30ffaa1222c..9b6aebbb47d3 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -544,6 +544,23 @@ static void fcoe_queue_timer(ulong lport) fcoe_check_wait_queue((struct fc_lport *)lport, NULL); } +/** + * fcoe_get_wwn() - Get the world wide name from LLD if it supports it + * @netdev: the associated net device + * @wwn: the output WWN + * @type: the type of WWN (WWPN or WWNN) + * + * Returns: 0 for success + */ +static int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type) +{ + const struct net_device_ops *ops = netdev->netdev_ops; + + if (ops->ndo_fcoe_get_wwn) + return ops->ndo_fcoe_get_wwn(netdev, wwn, type); + return -EINVAL; +} + /** * fcoe_netdev_config() - Set up net devive for SW FCoE * @lport: The local port that is associated with the net device @@ -611,9 +628,13 @@ static int fcoe_netdev_config(struct fc_lport *lport, struct net_device *netdev) */ if (netdev->priv_flags & IFF_802_1Q_VLAN) vid = vlan_dev_vlan_id(netdev); - wwnn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 1, 0); + + if (fcoe_get_wwn(netdev, &wwnn, NETDEV_FCOE_WWNN)) + wwnn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 1, 0); fc_set_wwnn(lport, wwnn); - wwpn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 2, vid); + if (fcoe_get_wwn(netdev, &wwpn, NETDEV_FCOE_WWPN)) + wwpn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, + 2, vid); fc_set_wwpn(lport, wwpn); } -- GitLab From 99c965dd9ee1a004efc083c3d760ba982bb76adf Mon Sep 17 00:00:00 2001 From: Kleber Sacilotto de Souza Date: Wed, 25 Nov 2009 20:13:43 -0200 Subject: [PATCH 036/618] [SCSI] ipr: fix EEH recovery After commits c82f63e411f1b58427c103bd95af2863b1c96dd1 (PCI: check saved state before restore) and 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff (PCI: Clear saved_state after the state has been restored) PCI drivers are prevented from restoring the device standard configuration registers twice in a row. These changes introduced a regression on ipr EEH recovery. The ipr device driver saves the PCI state only during the device probe and restores it on ipr_reset_restore_cfg_space() during IOA resets. This behavior is causing the EEH recovery to fail after the second error detected, since the registers are not being restored. One possible solution would be saving the registers after restoring them. The problem with this approach is that while recovering from an EEH error if pci_save_state() results in an EEH error, the adapter/slot will be reset, and end up back in ipr_reset_restore_cfg_space(), but it won't have a valid saved state to restore, so pci_restore_state() will fail. The following patch introduces a workaround for this problem, hacking around the PCI API by setting pdev->state_saved = true before we do the restore. It fixes the EEH regression and prevents that we hit another EEH error during EEH recovery. [jejb: fix is a hack ... Jesse and Rafael will fix properly] Signed-off-by: Kleber Sacilotto de Souza Acked-by: Brian King Cc: Jesse Barnes Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 206c2fa8c1ba..83a6b92fc8dc 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -6521,6 +6521,7 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd) int rc; ENTER; + ioa_cfg->pdev->state_saved = true; rc = pci_restore_state(ioa_cfg->pdev); if (rc != PCIBIOS_SUCCESSFUL) { -- GitLab From 5d9e1fa99c2a9a5977f5757f4e0fd02697c995c2 Mon Sep 17 00:00:00 2001 From: Anil Veerabhadrappa Date: Mon, 7 Dec 2009 11:39:33 -0800 Subject: [PATCH 037/618] [SCSI] bnx2i: Add 5771E device support to bnx2i driver Signed-off-by: Anil Veerabhadrappa Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_init.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 0c4210d48ee8..1dba86c931e0 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -83,8 +83,12 @@ void bnx2i_identify_device(struct bnx2i_hba *hba) set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type); hba->mail_queue_access = BNX2I_MQ_BIN_MODE; } else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710 || - hba->pci_did == PCI_DEVICE_ID_NX2_57711) + hba->pci_did == PCI_DEVICE_ID_NX2_57711 || + hba->pci_did == PCI_DEVICE_ID_NX2_57711E) set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type); + else + printk(KERN_ALERT "bnx2i: unknown device, 0x%x\n", + hba->pci_did); } -- GitLab From f8c9abe797c54e798b4025b54d71e5d2054c929a Mon Sep 17 00:00:00 2001 From: Anil Veerabhadrappa Date: Mon, 7 Dec 2009 11:39:54 -0800 Subject: [PATCH 038/618] [SCSI] bnx2i: Adjust sq_size module parametr to power of 2 only if a non-zero value is specified This issue was discovered during 10G iscsi testing Default value of 'sq_size' module parameter is '0' which means driver should use predefined SQ queue size when setting up iscsi connection. roundup_pow_of_two(0) results in '1' and forces driver to setup connections with send queue size of '1' and results in lower performance as well Signed-off-by: Anil Veerabhadrappa Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 1dba86c931e0..0307f85b4e2e 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -367,7 +367,7 @@ static int __init bnx2i_mod_init(void) printk(KERN_INFO "%s", version); - if (!is_power_of_2(sq_size)) + if (sq_size && !is_power_of_2(sq_size)) sq_size = roundup_pow_of_two(sq_size); mutex_init(&bnx2i_dev_lock); -- GitLab From 8776193bc308553ac0011b3bb2dd1837e0c6ab28 Mon Sep 17 00:00:00 2001 From: Anil Veerabhadrappa Date: Mon, 7 Dec 2009 11:40:18 -0800 Subject: [PATCH 039/618] [SCSI] bnx2i: update CQ arming algorith for 5771x chipsets Only affects 5771x (10G chipsets) devices This is an optimized CQ arming algoritm which takes into account the number of outstanding tasks Signed-off-by: Anil Veerabhadrappa Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i.h | 1 + drivers/scsi/bnx2i/bnx2i_hwi.c | 34 +++++++++++++++++++++++++-------- drivers/scsi/bnx2i/bnx2i_init.c | 4 ++++ 3 files changed, 31 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h index 2b973f3c2eb2..6cf9dc37d78b 100644 --- a/drivers/scsi/bnx2i/bnx2i.h +++ b/drivers/scsi/bnx2i/bnx2i.h @@ -684,6 +684,7 @@ extern unsigned int error_mask1, error_mask2; extern u64 iscsi_error_mask; extern unsigned int en_tcp_dack; extern unsigned int event_coal_div; +extern unsigned int event_coal_min; extern struct scsi_transport_template *bnx2i_scsi_xport_template; extern struct iscsi_transport bnx2i_iscsi_transport; diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 5c8d7630c13e..bb69a14a4afc 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -133,20 +133,38 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action) { struct bnx2i_5771x_cq_db *cq_db; u16 cq_index; + u16 next_index; + u32 num_active_cmds; + + /* Coalesce CQ entries only on 10G devices */ if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) return; + /* Do not update CQ DB multiple times before firmware writes + * '0xFFFF' to CQDB->SQN field. Deviation may cause spurious + * interrupts and other unwanted results + */ + cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt; + if (cq_db->sqn[0] && cq_db->sqn[0] != 0xFFFF) + return; + if (action == CNIC_ARM_CQE) { - cq_index = ep->qp.cqe_exp_seq_sn + - ep->num_active_cmds / event_coal_div; - cq_index %= (ep->qp.cqe_size * 2 + 1); - if (!cq_index) { + num_active_cmds = ep->num_active_cmds; + if (num_active_cmds <= event_coal_min) + next_index = 1; + else + next_index = event_coal_min + + (num_active_cmds - event_coal_min) / event_coal_div; + if (!next_index) + next_index = 1; + cq_index = ep->qp.cqe_exp_seq_sn + next_index - 1; + if (cq_index > ep->qp.cqe_size * 2) + cq_index -= ep->qp.cqe_size * 2; + if (!cq_index) cq_index = 1; - cq_db = (struct bnx2i_5771x_cq_db *) - ep->qp.cq_pgtbl_virt; - cq_db->sqn[0] = cq_index; - } + + cq_db->sqn[0] = cq_index; } } diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 0307f85b4e2e..465241dfce63 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -32,6 +32,10 @@ MODULE_VERSION(DRV_MODULE_VERSION); static DEFINE_MUTEX(bnx2i_dev_lock); +unsigned int event_coal_min = 24; +module_param(event_coal_min, int, 0664); +MODULE_PARM_DESC(event_coal_min, "Event Coalescing Minimum Commands"); + unsigned int event_coal_div = 1; module_param(event_coal_div, int, 0664); MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor"); -- GitLab From 85fef20222bda1ee41f97ff94a927180ef0b97e6 Mon Sep 17 00:00:00 2001 From: Anil Veerabhadrappa Date: Mon, 7 Dec 2009 11:40:29 -0800 Subject: [PATCH 040/618] [SCSI] bnx2i: Task management ABORT TASK fixes Due to typo error driver was failing TMF Abort Task request when ctask->sc != NULL. Fixed code to fail TMF ABORT Task request only when ctask->sc == NULL. Clear age component (19 most significant bits) of reference ITT carried in iSCSI TMF PDU. Age component is internal to initiator side and only lower bits of ITT as defined by ISCSI_ITT_MASK is is sent on wire. Retrieve LUN directly from the ref_sc and update SQ wqe as per chip HSI (Host Software Interface) specification Signed-off-by: Anil Veerabhadrappa Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_hwi.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index bb69a14a4afc..1af578dec276 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -384,6 +384,7 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn, struct bnx2i_cmd *bnx2i_cmd; struct bnx2i_tmf_request *tmfabort_wqe; u32 dword; + u32 scsi_lun[2]; bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data; tmfabort_hdr = (struct iscsi_tm *)mtask->hdr; @@ -394,27 +395,35 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn, tmfabort_wqe->op_attr = 0; tmfabort_wqe->op_attr = ISCSI_TMF_REQUEST_ALWAYS_ONE | ISCSI_TM_FUNC_ABORT_TASK; - tmfabort_wqe->lun[0] = be32_to_cpu(tmfabort_hdr->lun[0]); - tmfabort_wqe->lun[1] = be32_to_cpu(tmfabort_hdr->lun[1]); tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14)); tmfabort_wqe->reserved2 = 0; tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn); ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt); - if (!ctask || ctask->sc) + if (!ctask || !ctask->sc) /* * the iscsi layer must have completed the cmd while this * was starting up. + * + * Note: In the case of a SCSI cmd timeout, the task's sc + * is still active; hence ctask->sc != 0 + * In this case, the task must be aborted */ return 0; + ref_sc = ctask->sc; + /* Retrieve LUN directly from the ref_sc */ + int_to_scsilun(ref_sc->device->lun, (struct scsi_lun *) scsi_lun); + tmfabort_wqe->lun[0] = be32_to_cpu(scsi_lun[0]); + tmfabort_wqe->lun[1] = be32_to_cpu(scsi_lun[1]); + if (ref_sc->sc_data_direction == DMA_TO_DEVICE) dword = (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT); else dword = (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT); - tmfabort_wqe->ref_itt = (dword | tmfabort_hdr->rtt); + tmfabort_wqe->ref_itt = (dword | (tmfabort_hdr->rtt & ISCSI_ITT_MASK)); tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn); tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma; -- GitLab From 45ca38e753016432a266a18679268a4c4674fb52 Mon Sep 17 00:00:00 2001 From: Anil Veerabhadrappa Date: Mon, 7 Dec 2009 11:40:39 -0800 Subject: [PATCH 041/618] [SCSI] bnx2i: minor code cleanup and update driver version Removed duplicate function call and not-so-useful comment line Signed-off-by: Anil Veerabhadrappa Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_init.c | 4 ++-- drivers/scsi/bnx2i/bnx2i_iscsi.c | 2 -- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 465241dfce63..6d8172e781cf 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -17,8 +17,8 @@ static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list); static u32 adapter_count; #define DRV_MODULE_NAME "bnx2i" -#define DRV_MODULE_VERSION "2.0.1e" -#define DRV_MODULE_RELDATE "June 22, 2009" +#define DRV_MODULE_VERSION "2.1.0" +#define DRV_MODULE_RELDATE "Dec 06, 2009" static char version[] __devinitdata = "Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \ diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index 132898c88d5e..33b2294625bb 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -485,7 +485,6 @@ static int bnx2i_setup_cmd_pool(struct bnx2i_hba *hba, struct iscsi_task *task = session->cmds[i]; struct bnx2i_cmd *cmd = task->dd_data; - /* Anil */ task->hdr = &cmd->hdr; task->hdr_max = sizeof(struct iscsi_hdr); @@ -765,7 +764,6 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic) hba->pci_svid = hba->pcidev->subsystem_vendor; hba->pci_func = PCI_FUNC(hba->pcidev->devfn); hba->pci_devno = PCI_SLOT(hba->pcidev->devfn); - bnx2i_identify_device(hba); bnx2i_identify_device(hba); bnx2i_setup_host_queue_size(hba, shost); -- GitLab From 0109abffbf91b76e2a34e324a407d780a55fc1ab Mon Sep 17 00:00:00 2001 From: "kxie@chelsio.com" Date: Wed, 9 Dec 2009 21:25:36 -0800 Subject: [PATCH 042/618] [SCSI] cxgb3i: always use negative errno in case of error Signed-off-by: Karen Xie Signed-off-by: James Bottomley --- drivers/scsi/cxgb3i/cxgb3i_offload.c | 24 ++++++++++++------------ drivers/scsi/cxgb3i/cxgb3i_pdu.c | 4 ++-- 2 files changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c index c1d5be4adf9c..26ffdcd5a437 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.c +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -291,7 +291,7 @@ static void act_open_req_arp_failure(struct t3cdev *dev, struct sk_buff *skb) c3cn_hold(c3cn); spin_lock_bh(&c3cn->lock); if (c3cn->state == C3CN_STATE_CONNECTING) - fail_act_open(c3cn, EHOSTUNREACH); + fail_act_open(c3cn, -EHOSTUNREACH); spin_unlock_bh(&c3cn->lock); c3cn_put(c3cn); __kfree_skb(skb); @@ -792,18 +792,18 @@ static int act_open_rpl_status_to_errno(int status) { switch (status) { case CPL_ERR_CONN_RESET: - return ECONNREFUSED; + return -ECONNREFUSED; case CPL_ERR_ARP_MISS: - return EHOSTUNREACH; + return -EHOSTUNREACH; case CPL_ERR_CONN_TIMEDOUT: - return ETIMEDOUT; + return -ETIMEDOUT; case CPL_ERR_TCAM_FULL: - return ENOMEM; + return -ENOMEM; case CPL_ERR_CONN_EXIST: cxgb3i_log_error("ACTIVE_OPEN_RPL: 4-tuple in use\n"); - return EADDRINUSE; + return -EADDRINUSE; default: - return EIO; + return -EIO; } } @@ -817,7 +817,7 @@ static void act_open_retry_timer(unsigned long data) spin_lock_bh(&c3cn->lock); skb = alloc_skb(sizeof(struct cpl_act_open_req), GFP_ATOMIC); if (!skb) - fail_act_open(c3cn, ENOMEM); + fail_act_open(c3cn, -ENOMEM); else { skb->sk = (struct sock *)c3cn; set_arp_failure_handler(skb, act_open_req_arp_failure); @@ -966,14 +966,14 @@ static int abort_status_to_errno(struct s3_conn *c3cn, int abort_reason, case CPL_ERR_BAD_SYN: /* fall through */ case CPL_ERR_CONN_RESET: return c3cn->state > C3CN_STATE_ESTABLISHED ? - EPIPE : ECONNRESET; + -EPIPE : -ECONNRESET; case CPL_ERR_XMIT_TIMEDOUT: case CPL_ERR_PERSIST_TIMEDOUT: case CPL_ERR_FINWAIT2_TIMEDOUT: case CPL_ERR_KEEPALIVE_TIMEDOUT: - return ETIMEDOUT; + return -ETIMEDOUT; default: - return EIO; + return -EIO; } } @@ -1563,7 +1563,7 @@ static int initiate_act_open(struct s3_conn *c3cn, struct net_device *dev) s3_free_atid(cdev, c3cn->tid); c3cn->tid = 0; out_err: - return -1; + return -EINVAL; } diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c index 709105071177..1fe3b0f1f3c9 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c +++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c @@ -388,8 +388,8 @@ int cxgb3i_conn_xmit_pdu(struct iscsi_task *task) if (err > 0) { int pdulen = err; - cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n", - task, skb, skb->len, skb->data_len, err); + cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n", + task, skb, skb->len, skb->data_len, err); if (task->conn->hdrdgst_en) pdulen += ISCSI_DIGEST_SIZE; -- GitLab From edd163687ea59f01d6b43c9e1fdaa0126fa30191 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Tue, 8 Dec 2009 14:09:11 -0800 Subject: [PATCH 043/618] [SCSI] hpsa: add driver for HP Smart Array controllers. This driver supports a subset of HP Smart Array Controllers. It is a SCSI alternative to the cciss driver. [akpm@linux-foundation.org: avoid helpful cleanup patches] [achiang@hp.com: make device attrs static] [akpm@linux-foundation.org: msleep() does set_current_state() itself] Signed-off-by: Stephen M. Cameron Signed-off-by: Mike Miller Signed-off-by: Alex Chiang Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 10 + drivers/scsi/Makefile | 1 + drivers/scsi/hpsa.c | 3531 +++++++++++++++++++++++++++++++++++++++ drivers/scsi/hpsa.h | 273 +++ drivers/scsi/hpsa_cmd.h | 326 ++++ 5 files changed, 4141 insertions(+) create mode 100644 drivers/scsi/hpsa.c create mode 100644 drivers/scsi/hpsa.h create mode 100644 drivers/scsi/hpsa_cmd.h diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 36900c71a592..9191d1ea6451 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -388,6 +388,16 @@ config BLK_DEV_3W_XXXX_RAID Please read the comments at the top of . +config SCSI_HPSA + tristate "HP Smart Array SCSI driver" + depends on PCI && SCSI + help + This driver supports HP Smart Array Controllers (circa 2009). + It is a SCSI alternative to the cciss driver, which is a block + driver. Anyone wishing to use HP Smart Array controllers who + would prefer the devices be presented to linux as SCSI devices, + rather than as generic block devices should say Y here. + config SCSI_3W_9XXX tristate "3ware 9xxx SATA-RAID support" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 280d3c657d60..92a8c500b23d 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -91,6 +91,7 @@ obj-$(CONFIG_SCSI_BFA_FC) += bfa/ obj-$(CONFIG_SCSI_PAS16) += pas16.o obj-$(CONFIG_SCSI_T128) += t128.o obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o +obj-$(CONFIG_SCSI_HPSA) += hpsa.o obj-$(CONFIG_SCSI_DTC3280) += dtc.o obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/ obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c new file mode 100644 index 000000000000..bb96fdd58e23 --- /dev/null +++ b/drivers/scsi/hpsa.c @@ -0,0 +1,3531 @@ +/* + * Disk Array driver for HP Smart Array SAS controllers + * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Questions/Comments/Bugfixes to iss_storagedev@hp.com + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "hpsa_cmd.h" +#include "hpsa.h" + +/* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */ +#define HPSA_DRIVER_VERSION "1.0.0" +#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")" + +/* How long to wait (in milliseconds) for board to go into simple mode */ +#define MAX_CONFIG_WAIT 30000 +#define MAX_IOCTL_CONFIG_WAIT 1000 + +/*define how many times we will try a command because of bus resets */ +#define MAX_CMD_RETRIES 3 + +/* Embedded module documentation macros - see modules.h */ +MODULE_AUTHOR("Hewlett-Packard Company"); +MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \ + HPSA_DRIVER_VERSION); +MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers"); +MODULE_VERSION(HPSA_DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +static int hpsa_allow_any; +module_param(hpsa_allow_any, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(hpsa_allow_any, + "Allow hpsa driver to access unknown HP Smart Array hardware"); + +/* define the PCI info for the cards we can control */ +static const struct pci_device_id hpsa_pci_device_id[] = { + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3223}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3234}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324a}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324b}, + {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, hpsa_pci_device_id); + +/* board_id = Subsystem Device ID & Vendor ID + * product = Marketing Name for the board + * access = Address of the struct of function pointers + */ +static struct board_type products[] = { + {0x3223103C, "Smart Array P800", &SA5_access}, + {0x3234103C, "Smart Array P400", &SA5_access}, + {0x323d103c, "Smart Array P700M", &SA5_access}, + {0x3241103C, "Smart Array P212", &SA5_access}, + {0x3243103C, "Smart Array P410", &SA5_access}, + {0x3245103C, "Smart Array P410i", &SA5_access}, + {0x3247103C, "Smart Array P411", &SA5_access}, + {0x3249103C, "Smart Array P812", &SA5_access}, + {0x324a103C, "Smart Array P712m", &SA5_access}, + {0x324b103C, "Smart Array P711m", &SA5_access}, + {0xFFFF103C, "Unknown Smart Array", &SA5_access}, +}; + +static int number_of_controllers; + +static irqreturn_t do_hpsa_intr(int irq, void *dev_id); +static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg); +static void start_io(struct ctlr_info *h); + +#ifdef CONFIG_COMPAT +static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg); +#endif + +static void cmd_free(struct ctlr_info *h, struct CommandList *c); +static void cmd_special_free(struct ctlr_info *h, struct CommandList *c); +static struct CommandList *cmd_alloc(struct ctlr_info *h); +static struct CommandList *cmd_special_alloc(struct ctlr_info *h); +static void fill_cmd(struct CommandList *c, __u8 cmd, struct ctlr_info *h, + void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr, + int cmd_type); + +static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)); + +static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd); +static int hpsa_slave_alloc(struct scsi_device *sdev); +static void hpsa_slave_destroy(struct scsi_device *sdev); + +static ssize_t raid_level_show(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t lunid_show(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t unique_id_show(struct device *dev, + struct device_attribute *attr, char *buf); +static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno); +static ssize_t host_store_rescan(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count); +static int check_for_unit_attention(struct ctlr_info *h, + struct CommandList *c); +static void check_ioctl_unit_attention(struct ctlr_info *h, + struct CommandList *c); + +static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL); +static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL); +static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL); +static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); + +static struct device_attribute *hpsa_sdev_attrs[] = { + &dev_attr_raid_level, + &dev_attr_lunid, + &dev_attr_unique_id, + NULL, +}; + +static struct device_attribute *hpsa_shost_attrs[] = { + &dev_attr_rescan, + NULL, +}; + +static struct scsi_host_template hpsa_driver_template = { + .module = THIS_MODULE, + .name = "hpsa", + .proc_name = "hpsa", + .queuecommand = hpsa_scsi_queue_command, + .can_queue = 512, + .this_id = -1, + .sg_tablesize = MAXSGENTRIES, + .cmd_per_lun = 512, + .use_clustering = ENABLE_CLUSTERING, + .eh_device_reset_handler = hpsa_eh_device_reset_handler, + .ioctl = hpsa_ioctl, + .slave_alloc = hpsa_slave_alloc, + .slave_destroy = hpsa_slave_destroy, +#ifdef CONFIG_COMPAT + .compat_ioctl = hpsa_compat_ioctl, +#endif + .sdev_attrs = hpsa_sdev_attrs, + .shost_attrs = hpsa_shost_attrs, +}; + +static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) +{ + unsigned long *priv = shost_priv(sdev->host); + return (struct ctlr_info *) *priv; +} + +static struct task_struct *hpsa_scan_thread; +static DEFINE_MUTEX(hpsa_scan_mutex); +static LIST_HEAD(hpsa_scan_q); +static int hpsa_scan_func(void *data); + +/** + * add_to_scan_list() - add controller to rescan queue + * @h: Pointer to the controller. + * + * Adds the controller to the rescan queue if not already on the queue. + * + * returns 1 if added to the queue, 0 if skipped (could be on the + * queue already, or the controller could be initializing or shutting + * down). + **/ +static int add_to_scan_list(struct ctlr_info *h) +{ + struct ctlr_info *test_h; + int found = 0; + int ret = 0; + + if (h->busy_initializing) + return 0; + + /* + * If we don't get the lock, it means the driver is unloading + * and there's no point in scheduling a new scan. + */ + if (!mutex_trylock(&h->busy_shutting_down)) + return 0; + + mutex_lock(&hpsa_scan_mutex); + list_for_each_entry(test_h, &hpsa_scan_q, scan_list) { + if (test_h == h) { + found = 1; + break; + } + } + if (!found && !h->busy_scanning) { + INIT_COMPLETION(h->scan_wait); + list_add_tail(&h->scan_list, &hpsa_scan_q); + ret = 1; + } + mutex_unlock(&hpsa_scan_mutex); + mutex_unlock(&h->busy_shutting_down); + + return ret; +} + +/** + * remove_from_scan_list() - remove controller from rescan queue + * @h: Pointer to the controller. + * + * Removes the controller from the rescan queue if present. Blocks if + * the controller is currently conducting a rescan. The controller + * can be in one of three states: + * 1. Doesn't need a scan + * 2. On the scan list, but not scanning yet (we remove it) + * 3. Busy scanning (and not on the list). In this case we want to wait for + * the scan to complete to make sure the scanning thread for this + * controller is completely idle. + **/ +static void remove_from_scan_list(struct ctlr_info *h) +{ + struct ctlr_info *test_h, *tmp_h; + + mutex_lock(&hpsa_scan_mutex); + list_for_each_entry_safe(test_h, tmp_h, &hpsa_scan_q, scan_list) { + if (test_h == h) { /* state 2. */ + list_del(&h->scan_list); + complete_all(&h->scan_wait); + mutex_unlock(&hpsa_scan_mutex); + return; + } + } + if (h->busy_scanning) { /* state 3. */ + mutex_unlock(&hpsa_scan_mutex); + wait_for_completion(&h->scan_wait); + } else { /* state 1, nothing to do. */ + mutex_unlock(&hpsa_scan_mutex); + } +} + +/* hpsa_scan_func() - kernel thread used to rescan controllers + * @data: Ignored. + * + * A kernel thread used scan for drive topology changes on + * controllers. The thread processes only one controller at a time + * using a queue. Controllers are added to the queue using + * add_to_scan_list() and removed from the queue either after done + * processing or using remove_from_scan_list(). + * + * returns 0. + **/ +static int hpsa_scan_func(__attribute__((unused)) void *data) +{ + struct ctlr_info *h; + int host_no; + + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + if (kthread_should_stop()) + break; + + while (1) { + mutex_lock(&hpsa_scan_mutex); + if (list_empty(&hpsa_scan_q)) { + mutex_unlock(&hpsa_scan_mutex); + break; + } + h = list_entry(hpsa_scan_q.next, struct ctlr_info, + scan_list); + list_del(&h->scan_list); + h->busy_scanning = 1; + mutex_unlock(&hpsa_scan_mutex); + host_no = h->scsi_host ? h->scsi_host->host_no : -1; + hpsa_update_scsi_devices(h, host_no); + complete_all(&h->scan_wait); + mutex_lock(&hpsa_scan_mutex); + h->busy_scanning = 0; + mutex_unlock(&hpsa_scan_mutex); + } + } + return 0; +} + +static int check_for_unit_attention(struct ctlr_info *h, + struct CommandList *c) +{ + if (c->err_info->SenseInfo[2] != UNIT_ATTENTION) + return 0; + + switch (c->err_info->SenseInfo[12]) { + case STATE_CHANGED: + dev_warn(&h->pdev->dev, "hpsa%d: a state change " + "detected, command retried\n", h->ctlr); + break; + case LUN_FAILED: + dev_warn(&h->pdev->dev, "hpsa%d: LUN failure " + "detected, action required\n", h->ctlr); + break; + case REPORT_LUNS_CHANGED: + dev_warn(&h->pdev->dev, "hpsa%d: report LUN data " + "changed\n", h->ctlr); + /* + * Here, we could call add_to_scan_list and wake up the scan thread, + * except that it's quite likely that we will get more than one + * REPORT_LUNS_CHANGED condition in quick succession, which means + * that those which occur after the first one will likely happen + * *during* the hpsa_scan_thread's rescan. And the rescan code is not + * robust enough to restart in the middle, undoing what it has already + * done, and it's not clear that it's even possible to do this, since + * part of what it does is notify the SCSI mid layer, which starts + * doing it's own i/o to read partition tables and so on, and the + * driver doesn't have visibility to know what might need undoing. + * In any event, if possible, it is horribly complicated to get right + * so we just don't do it for now. + * + * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012. + */ + break; + case POWER_OR_RESET: + dev_warn(&h->pdev->dev, "hpsa%d: a power on " + "or device reset detected\n", h->ctlr); + break; + case UNIT_ATTENTION_CLEARED: + dev_warn(&h->pdev->dev, "hpsa%d: unit attention " + "cleared by another initiator\n", h->ctlr); + break; + default: + dev_warn(&h->pdev->dev, "hpsa%d: unknown " + "unit attention detected\n", h->ctlr); + break; + } + return 1; +} + +static ssize_t host_store_rescan(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ctlr_info *h; + struct Scsi_Host *shost = class_to_shost(dev); + unsigned long *priv = shost_priv(shost); + h = (struct ctlr_info *) *priv; + if (add_to_scan_list(h)) { + wake_up_process(hpsa_scan_thread); + wait_for_completion_interruptible(&h->scan_wait); + } + return count; +} + +/* Enqueuing and dequeuing functions for cmdlists. */ +static inline void addQ(struct hlist_head *list, struct CommandList *c) +{ + hlist_add_head(&c->list, list); +} + +static void enqueue_cmd_and_start_io(struct ctlr_info *h, + struct CommandList *c) +{ + unsigned long flags; + spin_lock_irqsave(&h->lock, flags); + addQ(&h->reqQ, c); + h->Qdepth++; + start_io(h); + spin_unlock_irqrestore(&h->lock, flags); +} + +static inline void removeQ(struct CommandList *c) +{ + if (WARN_ON(hlist_unhashed(&c->list))) + return; + hlist_del_init(&c->list); +} + +static inline int is_hba_lunid(unsigned char scsi3addr[]) +{ + return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0; +} + +static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[]) +{ + return (scsi3addr[3] & 0xC0) == 0x40; +} + +static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", + "UNKNOWN" +}; +#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1) + +static ssize_t raid_level_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + ssize_t l = 0; + int rlevel; + struct ctlr_info *h; + struct scsi_device *sdev; + struct hpsa_scsi_dev_t *hdev; + unsigned long flags; + + sdev = to_scsi_device(dev); + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->lock, flags); + hdev = sdev->hostdata; + if (!hdev) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENODEV; + } + + /* Is this even a logical drive? */ + if (!is_logical_dev_addr_mode(hdev->scsi3addr)) { + spin_unlock_irqrestore(&h->lock, flags); + l = snprintf(buf, PAGE_SIZE, "N/A\n"); + return l; + } + + rlevel = hdev->raid_level; + spin_unlock_irqrestore(&h->lock, flags); + if (rlevel < 0 || rlevel > RAID_UNKNOWN) + rlevel = RAID_UNKNOWN; + l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]); + return l; +} + +static ssize_t lunid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ctlr_info *h; + struct scsi_device *sdev; + struct hpsa_scsi_dev_t *hdev; + unsigned long flags; + unsigned char lunid[8]; + + sdev = to_scsi_device(dev); + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->lock, flags); + hdev = sdev->hostdata; + if (!hdev) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENODEV; + } + memcpy(lunid, hdev->scsi3addr, sizeof(lunid)); + spin_unlock_irqrestore(&h->lock, flags); + return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n", + lunid[0], lunid[1], lunid[2], lunid[3], + lunid[4], lunid[5], lunid[6], lunid[7]); +} + +static ssize_t unique_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ctlr_info *h; + struct scsi_device *sdev; + struct hpsa_scsi_dev_t *hdev; + unsigned long flags; + unsigned char sn[16]; + + sdev = to_scsi_device(dev); + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->lock, flags); + hdev = sdev->hostdata; + if (!hdev) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENODEV; + } + memcpy(sn, hdev->device_id, sizeof(sn)); + spin_unlock_irqrestore(&h->lock, flags); + return snprintf(buf, 16 * 2 + 2, + "%02X%02X%02X%02X%02X%02X%02X%02X" + "%02X%02X%02X%02X%02X%02X%02X%02X\n", + sn[0], sn[1], sn[2], sn[3], + sn[4], sn[5], sn[6], sn[7], + sn[8], sn[9], sn[10], sn[11], + sn[12], sn[13], sn[14], sn[15]); +} + +static int hpsa_find_target_lun(struct ctlr_info *h, + unsigned char scsi3addr[], int bus, int *target, int *lun) +{ + /* finds an unused bus, target, lun for a new physical device + * assumes h->devlock is held + */ + int i, found = 0; + DECLARE_BITMAP(lun_taken, HPSA_MAX_SCSI_DEVS_PER_HBA); + + memset(&lun_taken[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA >> 3); + + for (i = 0; i < h->ndevices; i++) { + if (h->dev[i]->bus == bus && h->dev[i]->target != -1) + set_bit(h->dev[i]->target, lun_taken); + } + + for (i = 0; i < HPSA_MAX_SCSI_DEVS_PER_HBA; i++) { + if (!test_bit(i, lun_taken)) { + /* *bus = 1; */ + *target = i; + *lun = 0; + found = 1; + break; + } + } + return !found; +} + +/* Add an entry into h->dev[] array. */ +static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno, + struct hpsa_scsi_dev_t *device, + struct hpsa_scsi_dev_t *added[], int *nadded) +{ + /* assumes h->devlock is held */ + int n = h->ndevices; + int i; + unsigned char addr1[8], addr2[8]; + struct hpsa_scsi_dev_t *sd; + + if (n >= HPSA_MAX_SCSI_DEVS_PER_HBA) { + dev_err(&h->pdev->dev, "too many devices, some will be " + "inaccessible.\n"); + return -1; + } + + /* physical devices do not have lun or target assigned until now. */ + if (device->lun != -1) + /* Logical device, lun is already assigned. */ + goto lun_assigned; + + /* If this device a non-zero lun of a multi-lun device + * byte 4 of the 8-byte LUN addr will contain the logical + * unit no, zero otherise. + */ + if (device->scsi3addr[4] == 0) { + /* This is not a non-zero lun of a multi-lun device */ + if (hpsa_find_target_lun(h, device->scsi3addr, + device->bus, &device->target, &device->lun) != 0) + return -1; + goto lun_assigned; + } + + /* This is a non-zero lun of a multi-lun device. + * Search through our list and find the device which + * has the same 8 byte LUN address, excepting byte 4. + * Assign the same bus and target for this new LUN. + * Use the logical unit number from the firmware. + */ + memcpy(addr1, device->scsi3addr, 8); + addr1[4] = 0; + for (i = 0; i < n; i++) { + sd = h->dev[i]; + memcpy(addr2, sd->scsi3addr, 8); + addr2[4] = 0; + /* differ only in byte 4? */ + if (memcmp(addr1, addr2, 8) == 0) { + device->bus = sd->bus; + device->target = sd->target; + device->lun = device->scsi3addr[4]; + break; + } + } + if (device->lun == -1) { + dev_warn(&h->pdev->dev, "physical device with no LUN=0," + " suspect firmware bug or unsupported hardware " + "configuration.\n"); + return -1; + } + +lun_assigned: + + h->dev[n] = device; + h->ndevices++; + added[*nadded] = device; + (*nadded)++; + + /* initially, (before registering with scsi layer) we don't + * know our hostno and we don't want to print anything first + * time anyway (the scsi layer's inquiries will show that info) + */ + /* if (hostno != -1) */ + dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n", + scsi_device_type(device->devtype), hostno, + device->bus, device->target, device->lun); + return 0; +} + +/* Remove an entry from h->dev[] array. */ +static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry, + struct hpsa_scsi_dev_t *removed[], int *nremoved) +{ + /* assumes h->devlock is held */ + int i; + struct hpsa_scsi_dev_t *sd; + + if (entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA) + BUG(); + + sd = h->dev[entry]; + removed[*nremoved] = h->dev[entry]; + (*nremoved)++; + + for (i = entry; i < h->ndevices-1; i++) + h->dev[i] = h->dev[i+1]; + h->ndevices--; + dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n", + scsi_device_type(sd->devtype), hostno, sd->bus, sd->target, + sd->lun); +} + +#define SCSI3ADDR_EQ(a, b) ( \ + (a)[7] == (b)[7] && \ + (a)[6] == (b)[6] && \ + (a)[5] == (b)[5] && \ + (a)[4] == (b)[4] && \ + (a)[3] == (b)[3] && \ + (a)[2] == (b)[2] && \ + (a)[1] == (b)[1] && \ + (a)[0] == (b)[0]) + +static void fixup_botched_add(struct ctlr_info *h, + struct hpsa_scsi_dev_t *added) +{ + /* called when scsi_add_device fails in order to re-adjust + * h->dev[] to match the mid layer's view. + */ + unsigned long flags; + int i, j; + + spin_lock_irqsave(&h->lock, flags); + for (i = 0; i < h->ndevices; i++) { + if (h->dev[i] == added) { + for (j = i; j < h->ndevices-1; j++) + h->dev[j] = h->dev[j+1]; + h->ndevices--; + break; + } + } + spin_unlock_irqrestore(&h->lock, flags); + kfree(added); +} + +static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1, + struct hpsa_scsi_dev_t *dev2) +{ + if ((is_logical_dev_addr_mode(dev1->scsi3addr) || + (dev1->lun != -1 && dev2->lun != -1)) && + dev1->devtype != 0x0C) + return (memcmp(dev1, dev2, sizeof(*dev1)) == 0); + + /* we compare everything except lun and target as these + * are not yet assigned. Compare parts likely + * to differ first + */ + if (memcmp(dev1->scsi3addr, dev2->scsi3addr, + sizeof(dev1->scsi3addr)) != 0) + return 0; + if (memcmp(dev1->device_id, dev2->device_id, + sizeof(dev1->device_id)) != 0) + return 0; + if (memcmp(dev1->model, dev2->model, sizeof(dev1->model)) != 0) + return 0; + if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0) + return 0; + if (memcmp(dev1->revision, dev2->revision, sizeof(dev1->revision)) != 0) + return 0; + if (dev1->devtype != dev2->devtype) + return 0; + if (dev1->raid_level != dev2->raid_level) + return 0; + if (dev1->bus != dev2->bus) + return 0; + return 1; +} + +/* Find needle in haystack. If exact match found, return DEVICE_SAME, + * and return needle location in *index. If scsi3addr matches, but not + * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle + * location in *index. If needle not found, return DEVICE_NOT_FOUND. + */ +static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle, + struct hpsa_scsi_dev_t *haystack[], int haystack_size, + int *index) +{ + int i; +#define DEVICE_NOT_FOUND 0 +#define DEVICE_CHANGED 1 +#define DEVICE_SAME 2 + for (i = 0; i < haystack_size; i++) { + if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) { + *index = i; + if (device_is_the_same(needle, haystack[i])) + return DEVICE_SAME; + else + return DEVICE_CHANGED; + } + } + *index = -1; + return DEVICE_NOT_FOUND; +} + +static int adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, + struct hpsa_scsi_dev_t *sd[], int nsds) +{ + /* sd contains scsi3 addresses and devtypes, and inquiry + * data. This function takes what's in sd to be the current + * reality and updates h->dev[] to reflect that reality. + */ + int i, entry, device_change, changes = 0; + struct hpsa_scsi_dev_t *csd; + unsigned long flags; + struct hpsa_scsi_dev_t **added, **removed; + int nadded, nremoved; + struct Scsi_Host *sh = NULL; + + added = kzalloc(sizeof(*added) * HPSA_MAX_SCSI_DEVS_PER_HBA, + GFP_KERNEL); + removed = kzalloc(sizeof(*removed) * HPSA_MAX_SCSI_DEVS_PER_HBA, + GFP_KERNEL); + + if (!added || !removed) { + dev_warn(&h->pdev->dev, "out of memory in " + "adjust_hpsa_scsi_table\n"); + goto free_and_out; + } + + spin_lock_irqsave(&h->devlock, flags); + + /* find any devices in h->dev[] that are not in + * sd[] and remove them from h->dev[], and for any + * devices which have changed, remove the old device + * info and add the new device info. + */ + i = 0; + nremoved = 0; + nadded = 0; + while (i < h->ndevices) { + csd = h->dev[i]; + device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry); + if (device_change == DEVICE_NOT_FOUND) { + changes++; + hpsa_scsi_remove_entry(h, hostno, i, + removed, &nremoved); + continue; /* remove ^^^, hence i not incremented */ + } else if (device_change == DEVICE_CHANGED) { + changes++; + hpsa_scsi_remove_entry(h, hostno, i, + removed, &nremoved); + (void) hpsa_scsi_add_entry(h, hostno, sd[entry], + added, &nadded); + /* add can't fail, we just removed one. */ + sd[entry] = NULL; /* prevent it from being freed */ + } + i++; + } + + /* Now, make sure every device listed in sd[] is also + * listed in h->dev[], adding them if they aren't found + */ + + for (i = 0; i < nsds; i++) { + if (!sd[i]) /* if already added above. */ + continue; + device_change = hpsa_scsi_find_entry(sd[i], h->dev, + h->ndevices, &entry); + if (device_change == DEVICE_NOT_FOUND) { + changes++; + if (hpsa_scsi_add_entry(h, hostno, sd[i], + added, &nadded) != 0) + break; + sd[i] = NULL; /* prevent from being freed later. */ + } else if (device_change == DEVICE_CHANGED) { + /* should never happen... */ + changes++; + dev_warn(&h->pdev->dev, + "device unexpectedly changed.\n"); + /* but if it does happen, we just ignore that device */ + } + } + spin_unlock_irqrestore(&h->devlock, flags); + + /* Don't notify scsi mid layer of any changes the first time through + * (or if there are no changes) scsi_scan_host will do it later the + * first time through. + */ + if (hostno == -1 || !changes) + goto free_and_out; + + sh = h->scsi_host; + /* Notify scsi mid layer of any removed devices */ + for (i = 0; i < nremoved; i++) { + struct scsi_device *sdev = + scsi_device_lookup(sh, removed[i]->bus, + removed[i]->target, removed[i]->lun); + if (sdev != NULL) { + scsi_remove_device(sdev); + scsi_device_put(sdev); + } else { + /* We don't expect to get here. + * future cmds to this device will get selection + * timeout as if the device was gone. + */ + dev_warn(&h->pdev->dev, "didn't find c%db%dt%dl%d " + " for removal.", hostno, removed[i]->bus, + removed[i]->target, removed[i]->lun); + } + kfree(removed[i]); + removed[i] = NULL; + } + + /* Notify scsi mid layer of any added devices */ + for (i = 0; i < nadded; i++) { + if (scsi_add_device(sh, added[i]->bus, + added[i]->target, added[i]->lun) == 0) + continue; + dev_warn(&h->pdev->dev, "scsi_add_device c%db%dt%dl%d failed, " + "device not added.\n", hostno, added[i]->bus, + added[i]->target, added[i]->lun); + /* now we have to remove it from h->dev, + * since it didn't get added to scsi mid layer + */ + fixup_botched_add(h, added[i]); + } + +free_and_out: + kfree(added); + kfree(removed); + return 0; +} + +/* + * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t * + * Assume's h->devlock is held. + */ +static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h, + int bus, int target, int lun) +{ + int i; + struct hpsa_scsi_dev_t *sd; + + for (i = 0; i < h->ndevices; i++) { + sd = h->dev[i]; + if (sd->bus == bus && sd->target == target && sd->lun == lun) + return sd; + } + return NULL; +} + +/* link sdev->hostdata to our per-device structure. */ +static int hpsa_slave_alloc(struct scsi_device *sdev) +{ + struct hpsa_scsi_dev_t *sd; + unsigned long flags; + struct ctlr_info *h; + + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->devlock, flags); + sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev), + sdev_id(sdev), sdev->lun); + if (sd != NULL) + sdev->hostdata = sd; + spin_unlock_irqrestore(&h->devlock, flags); + return 0; +} + +static void hpsa_slave_destroy(struct scsi_device *sdev) +{ + return; /* nothing to do. */ +} + +static void hpsa_scsi_setup(struct ctlr_info *h) +{ + h->ndevices = 0; + h->scsi_host = NULL; + spin_lock_init(&h->devlock); + return; +} + +static void complete_scsi_command(struct CommandList *cp, + int timeout, __u32 tag) +{ + struct scsi_cmnd *cmd; + struct ctlr_info *h; + struct ErrorInfo *ei; + + unsigned char sense_key; + unsigned char asc; /* additional sense code */ + unsigned char ascq; /* additional sense code qualifier */ + + ei = cp->err_info; + cmd = (struct scsi_cmnd *) cp->scsi_cmd; + h = cp->h; + + scsi_dma_unmap(cmd); /* undo the DMA mappings */ + + cmd->result = (DID_OK << 16); /* host byte */ + cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ + cmd->result |= (ei->ScsiStatus << 1); + + /* copy the sense data whether we need to or not. */ + memcpy(cmd->sense_buffer, ei->SenseInfo, + ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? + SCSI_SENSE_BUFFERSIZE : + ei->SenseLen); + scsi_set_resid(cmd, ei->ResidualCnt); + + if (ei->CommandStatus == 0) { + cmd->scsi_done(cmd); + cmd_free(h, cp); + return; + } + + /* an error has occurred */ + switch (ei->CommandStatus) { + + case CMD_TARGET_STATUS: + if (ei->ScsiStatus) { + /* Get sense key */ + sense_key = 0xf & ei->SenseInfo[2]; + /* Get additional sense code */ + asc = ei->SenseInfo[12]; + /* Get addition sense code qualifier */ + ascq = ei->SenseInfo[13]; + } + + if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) { + if (check_for_unit_attention(h, cp)) { + cmd->result = DID_SOFT_ERROR << 16; + break; + } + if (sense_key == ILLEGAL_REQUEST) { + /* + * SCSI REPORT_LUNS is commonly unsupported on + * Smart Array. Suppress noisy complaint. + */ + if (cp->Request.CDB[0] == REPORT_LUNS) + break; + + /* If ASC/ASCQ indicate Logical Unit + * Not Supported condition, + */ + if ((asc == 0x25) && (ascq == 0x0)) { + dev_warn(&h->pdev->dev, "cp %p " + "has check condition\n", cp); + break; + } + } + + if (sense_key == NOT_READY) { + /* If Sense is Not Ready, Logical Unit + * Not ready, Manual Intervention + * required + */ + if ((asc == 0x04) && (ascq == 0x03)) { + cmd->result = DID_NO_CONNECT << 16; + dev_warn(&h->pdev->dev, "cp %p " + "has check condition: unit " + "not ready, manual " + "intervention required\n", cp); + break; + } + } + + + /* Must be some other type of check condition */ + dev_warn(&h->pdev->dev, "cp %p has check condition: " + "unknown type: " + "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " + "Returning result: 0x%x, " + "cmd=[%02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x]\n", + cp, sense_key, asc, ascq, + cmd->result, + cmd->cmnd[0], cmd->cmnd[1], + cmd->cmnd[2], cmd->cmnd[3], + cmd->cmnd[4], cmd->cmnd[5], + cmd->cmnd[6], cmd->cmnd[7], + cmd->cmnd[8], cmd->cmnd[9]); + break; + } + + + /* Problem was not a check condition + * Pass it up to the upper layers... + */ + if (ei->ScsiStatus) { + dev_warn(&h->pdev->dev, "cp %p has status 0x%x " + "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " + "Returning result: 0x%x\n", + cp, ei->ScsiStatus, + sense_key, asc, ascq, + cmd->result); + } else { /* scsi status is zero??? How??? */ + dev_warn(&h->pdev->dev, "cp %p SCSI status was 0. " + "Returning no connection.\n", cp), + + /* Ordinarily, this case should never happen, + * but there is a bug in some released firmware + * revisions that allows it to happen if, for + * example, a 4100 backplane loses power and + * the tape drive is in it. We assume that + * it's a fatal error of some kind because we + * can't show that it wasn't. We will make it + * look like selection timeout since that is + * the most common reason for this to occur, + * and it's severe enough. + */ + + cmd->result = DID_NO_CONNECT << 16; + } + break; + + case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ + break; + case CMD_DATA_OVERRUN: + dev_warn(&h->pdev->dev, "cp %p has" + " completed with data overrun " + "reported\n", cp); + break; + case CMD_INVALID: { + /* print_bytes(cp, sizeof(*cp), 1, 0); + print_cmd(cp); */ + /* We get CMD_INVALID if you address a non-existent device + * instead of a selection timeout (no response). You will + * see this if you yank out a drive, then try to access it. + * This is kind of a shame because it means that any other + * CMD_INVALID (e.g. driver bug) will get interpreted as a + * missing target. */ + cmd->result = DID_NO_CONNECT << 16; + } + break; + case CMD_PROTOCOL_ERR: + dev_warn(&h->pdev->dev, "cp %p has " + "protocol error \n", cp); + break; + case CMD_HARDWARE_ERR: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p had hardware error\n", cp); + break; + case CMD_CONNECTION_LOST: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p had connection lost\n", cp); + break; + case CMD_ABORTED: + cmd->result = DID_ABORT << 16; + dev_warn(&h->pdev->dev, "cp %p was aborted with status 0x%x\n", + cp, ei->ScsiStatus); + break; + case CMD_ABORT_FAILED: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p reports abort failed\n", cp); + break; + case CMD_UNSOLICITED_ABORT: + cmd->result = DID_ABORT << 16; + dev_warn(&h->pdev->dev, "cp %p aborted do to an unsolicited " + "abort\n", cp); + break; + case CMD_TIMEOUT: + cmd->result = DID_TIME_OUT << 16; + dev_warn(&h->pdev->dev, "cp %p timedout\n", cp); + break; + default: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n", + cp, ei->CommandStatus); + } + cmd->scsi_done(cmd); + cmd_free(h, cp); +} + +static int hpsa_scsi_detect(struct ctlr_info *h) +{ + struct Scsi_Host *sh; + int error; + + sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h)); + if (sh == NULL) + goto fail; + + sh->io_port = 0; + sh->n_io_port = 0; + sh->this_id = -1; + sh->max_channel = 3; + sh->max_cmd_len = MAX_COMMAND_SIZE; + sh->max_lun = HPSA_MAX_LUN; + sh->max_id = HPSA_MAX_LUN; + h->scsi_host = sh; + sh->hostdata[0] = (unsigned long) h; + sh->irq = h->intr[SIMPLE_MODE_INT]; + sh->unique_id = sh->irq; + error = scsi_add_host(sh, &h->pdev->dev); + if (error) + goto fail_host_put; + scsi_scan_host(sh); + return 0; + + fail_host_put: + dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_add_host" + " failed for controller %d\n", h->ctlr); + scsi_host_put(sh); + return -1; + fail: + dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_host_alloc" + " failed for controller %d\n", h->ctlr); + return -1; +} + +static void hpsa_pci_unmap(struct pci_dev *pdev, + struct CommandList *c, int sg_used, int data_direction) +{ + int i; + union u64bit addr64; + + for (i = 0; i < sg_used; i++) { + addr64.val32.lower = c->SG[i].Addr.lower; + addr64.val32.upper = c->SG[i].Addr.upper; + pci_unmap_single(pdev, (dma_addr_t) addr64.val, c->SG[i].Len, + data_direction); + } +} + +static void hpsa_map_one(struct pci_dev *pdev, + struct CommandList *cp, + unsigned char *buf, + size_t buflen, + int data_direction) +{ + __u64 addr64; + + if (buflen == 0 || data_direction == PCI_DMA_NONE) { + cp->Header.SGList = 0; + cp->Header.SGTotal = 0; + return; + } + + addr64 = (__u64) pci_map_single(pdev, buf, buflen, data_direction); + cp->SG[0].Addr.lower = + (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF); + cp->SG[0].Addr.upper = + (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF); + cp->SG[0].Len = buflen; + cp->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */ + cp->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */ +} + +static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, + struct CommandList *c) +{ + DECLARE_COMPLETION_ONSTACK(wait); + + c->waiting = &wait; + enqueue_cmd_and_start_io(h, c); + wait_for_completion(&wait); +} + +static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, + struct CommandList *c, int data_direction) +{ + int retry_count = 0; + + do { + memset(c->err_info, 0, sizeof(c->err_info)); + hpsa_scsi_do_simple_cmd_core(h, c); + retry_count++; + } while (check_for_unit_attention(h, c) && retry_count <= 3); + hpsa_pci_unmap(h->pdev, c, 1, data_direction); +} + +static void hpsa_scsi_interpret_error(struct CommandList *cp) +{ + struct ErrorInfo *ei; + struct device *d = &cp->h->pdev->dev; + + ei = cp->err_info; + switch (ei->CommandStatus) { + case CMD_TARGET_STATUS: + dev_warn(d, "cmd %p has completed with errors\n", cp); + dev_warn(d, "cmd %p has SCSI Status = %x\n", cp, + ei->ScsiStatus); + if (ei->ScsiStatus == 0) + dev_warn(d, "SCSI status is abnormally zero. " + "(probably indicates selection timeout " + "reported incorrectly due to a known " + "firmware bug, circa July, 2001.)\n"); + break; + case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ + dev_info(d, "UNDERRUN\n"); + break; + case CMD_DATA_OVERRUN: + dev_warn(d, "cp %p has completed with data overrun\n", cp); + break; + case CMD_INVALID: { + /* controller unfortunately reports SCSI passthru's + * to non-existent targets as invalid commands. + */ + dev_warn(d, "cp %p is reported invalid (probably means " + "target device no longer present)\n", cp); + /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0); + print_cmd(cp); */ + } + break; + case CMD_PROTOCOL_ERR: + dev_warn(d, "cp %p has protocol error \n", cp); + break; + case CMD_HARDWARE_ERR: + /* cmd->result = DID_ERROR << 16; */ + dev_warn(d, "cp %p had hardware error\n", cp); + break; + case CMD_CONNECTION_LOST: + dev_warn(d, "cp %p had connection lost\n", cp); + break; + case CMD_ABORTED: + dev_warn(d, "cp %p was aborted\n", cp); + break; + case CMD_ABORT_FAILED: + dev_warn(d, "cp %p reports abort failed\n", cp); + break; + case CMD_UNSOLICITED_ABORT: + dev_warn(d, "cp %p aborted due to an unsolicited abort\n", cp); + break; + case CMD_TIMEOUT: + dev_warn(d, "cp %p timed out\n", cp); + break; + default: + dev_warn(d, "cp %p returned unknown status %x\n", cp, + ei->CommandStatus); + } +} + +static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, + unsigned char page, unsigned char *buf, + unsigned char bufsize) +{ + int rc = IO_OK; + struct CommandList *c; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + + if (c == NULL) { /* trouble... */ + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -1; + } + + fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, page, scsi3addr, TYPE_CMD); + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + ei = c->err_info; + if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { + hpsa_scsi_interpret_error(c); + rc = -1; + } + cmd_special_free(h, c); + return rc; +} + +static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr) +{ + int rc = IO_OK; + struct CommandList *c; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + + if (c == NULL) { /* trouble... */ + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -1; + } + + fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, scsi3addr, TYPE_MSG); + hpsa_scsi_do_simple_cmd_core(h, c); + /* no unmap needed here because no data xfer. */ + + ei = c->err_info; + if (ei->CommandStatus != 0) { + hpsa_scsi_interpret_error(c); + rc = -1; + } + cmd_special_free(h, c); + return rc; +} + +static void hpsa_get_raid_level(struct ctlr_info *h, + unsigned char *scsi3addr, unsigned char *raid_level) +{ + int rc; + unsigned char *buf; + + *raid_level = RAID_UNKNOWN; + buf = kzalloc(64, GFP_KERNEL); + if (!buf) + return; + rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0xC1, buf, 64); + if (rc == 0) + *raid_level = buf[8]; + if (*raid_level > RAID_UNKNOWN) + *raid_level = RAID_UNKNOWN; + kfree(buf); + return; +} + +/* Get the device id from inquiry page 0x83 */ +static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr, + unsigned char *device_id, int buflen) +{ + int rc; + unsigned char *buf; + + if (buflen > 16) + buflen = 16; + buf = kzalloc(64, GFP_KERNEL); + if (!buf) + return -1; + rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64); + if (rc == 0) + memcpy(device_id, &buf[8], buflen); + kfree(buf); + return rc != 0; +} + +static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, + struct ReportLUNdata *buf, int bufsize, + int extended_response) +{ + int rc = IO_OK; + struct CommandList *c; + unsigned char scsi3addr[8]; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + if (c == NULL) { /* trouble... */ + dev_err(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -1; + } + + memset(&scsi3addr[0], 0, 8); /* address the controller */ + + fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h, + buf, bufsize, 0, scsi3addr, TYPE_CMD); + if (extended_response) + c->Request.CDB[1] = extended_response; + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + ei = c->err_info; + if (ei->CommandStatus != 0 && + ei->CommandStatus != CMD_DATA_UNDERRUN) { + hpsa_scsi_interpret_error(c); + rc = -1; + } + cmd_special_free(h, c); + return rc; +} + +static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, + struct ReportLUNdata *buf, + int bufsize, int extended_response) +{ + return hpsa_scsi_do_report_luns(h, 0, buf, bufsize, extended_response); +} + +static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h, + struct ReportLUNdata *buf, int bufsize) +{ + return hpsa_scsi_do_report_luns(h, 1, buf, bufsize, 0); +} + +static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device, + int bus, int target, int lun) +{ + device->bus = bus; + device->target = target; + device->lun = lun; +} + +static int hpsa_update_device_info(struct ctlr_info *h, + unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device) +{ +#define OBDR_TAPE_INQ_SIZE 49 + unsigned char *inq_buff = NULL; + + inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); + if (!inq_buff) + goto bail_out; + + memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE); + /* Do an inquiry to the device to see what it is. */ + if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff, + (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) { + /* Inquiry failed (msg printed already) */ + dev_err(&h->pdev->dev, + "hpsa_update_device_info: inquiry failed\n"); + goto bail_out; + } + + /* As a side effect, record the firmware version number + * if we happen to be talking to the RAID controller. + */ + if (is_hba_lunid(scsi3addr)) + memcpy(h->firm_ver, &inq_buff[32], 4); + + this_device->devtype = (inq_buff[0] & 0x1f); + memcpy(this_device->scsi3addr, scsi3addr, 8); + memcpy(this_device->vendor, &inq_buff[8], + sizeof(this_device->vendor)); + memcpy(this_device->model, &inq_buff[16], + sizeof(this_device->model)); + memcpy(this_device->revision, &inq_buff[32], + sizeof(this_device->revision)); + memset(this_device->device_id, 0, + sizeof(this_device->device_id)); + hpsa_get_device_id(h, scsi3addr, this_device->device_id, + sizeof(this_device->device_id)); + + if (this_device->devtype == TYPE_DISK && + is_logical_dev_addr_mode(scsi3addr)) + hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level); + else + this_device->raid_level = RAID_UNKNOWN; + + kfree(inq_buff); + return 0; + +bail_out: + kfree(inq_buff); + return 1; +} + +static unsigned char *msa2xxx_model[] = { + "MSA2012", + "MSA2024", + "MSA2312", + "MSA2324", + NULL, +}; + +static int is_msa2xxx(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) +{ + int i; + + for (i = 0; msa2xxx_model[i]; i++) + if (strncmp(device->model, msa2xxx_model[i], + strlen(msa2xxx_model[i])) == 0) + return 1; + return 0; +} + +/* Helper function to assign bus, target, lun mapping of devices. + * Puts non-msa2xxx logical volumes on bus 0, msa2xxx logical + * volumes on bus 1, physical devices on bus 2. and the hba on bus 3. + * Logical drive target and lun are assigned at this time, but + * physical device lun and target assignment are deferred (assigned + * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.) + */ +static void figure_bus_target_lun(struct ctlr_info *h, + __u8 *lunaddrbytes, int *bus, int *target, int *lun, + struct hpsa_scsi_dev_t *device) +{ + + __u32 lunid; + + if (is_logical_dev_addr_mode(lunaddrbytes)) { + /* logical device */ + memcpy(&lunid, lunaddrbytes, sizeof(lunid)); + lunid = le32_to_cpu(lunid); + + if (is_msa2xxx(h, device)) { + *bus = 1; + *target = (lunid >> 16) & 0x3fff; + *lun = lunid & 0x00ff; + } else { + *bus = 0; + *lun = 0; + *target = lunid & 0x3fff; + } + } else { + /* physical device */ + if (is_hba_lunid(lunaddrbytes)) + *bus = 3; + else + *bus = 2; + *target = -1; + *lun = -1; /* we will fill these in later. */ + } +} + +/* + * If there is no lun 0 on a target, linux won't find any devices. + * For the MSA2xxx boxes, we have to manually detect the enclosure + * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report + * it for some reason. *tmpdevice is the target we're adding, + * this_device is a pointer into the current element of currentsd[] + * that we're building up in update_scsi_devices(), below. + * lunzerobits is a bitmap that tracks which targets already have a + * lun 0 assigned. + * Returns 1 if an enclosure was added, 0 if not. + */ +static int add_msa2xxx_enclosure_device(struct ctlr_info *h, + struct hpsa_scsi_dev_t *tmpdevice, + struct hpsa_scsi_dev_t *this_device, __u8 *lunaddrbytes, + int bus, int target, int lun, unsigned long lunzerobits[], + int *nmsa2xxx_enclosures) +{ + unsigned char scsi3addr[8]; + + if (test_bit(target, lunzerobits)) + return 0; /* There is already a lun 0 on this target. */ + + if (!is_logical_dev_addr_mode(lunaddrbytes)) + return 0; /* It's the logical targets that may lack lun 0. */ + + if (!is_msa2xxx(h, tmpdevice)) + return 0; /* It's only the MSA2xxx that have this problem. */ + + if (lun == 0) /* if lun is 0, then obviously we have a lun 0. */ + return 0; + + if (is_hba_lunid(scsi3addr)) + return 0; /* Don't add the RAID controller here. */ + +#define MAX_MSA2XXX_ENCLOSURES 32 + if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) { + dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX " + "enclosures exceeded. Check your hardware " + "configuration."); + return 0; + } + + memset(scsi3addr, 0, 8); + scsi3addr[3] = target; + if (hpsa_update_device_info(h, scsi3addr, this_device)) + return 0; + (*nmsa2xxx_enclosures)++; + hpsa_set_bus_target_lun(this_device, bus, target, 0); + set_bit(target, lunzerobits); + return 1; +} + +/* + * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev, + * logdev. The number of luns in physdev and logdev are returned in + * *nphysicals and *nlogicals, respectively. + * Returns 0 on success, -1 otherwise. + */ +static int hpsa_gather_lun_info(struct ctlr_info *h, + int reportlunsize, + struct ReportLUNdata *physdev, __u32 *nphysicals, + struct ReportLUNdata *logdev, __u32 *nlogicals) +{ + if (hpsa_scsi_do_report_phys_luns(h, physdev, reportlunsize, 0)) { + dev_err(&h->pdev->dev, "report physical LUNs failed.\n"); + return -1; + } + memcpy(nphysicals, &physdev->LUNListLength[0], sizeof(*nphysicals)); + *nphysicals = be32_to_cpu(*nphysicals) / 8; +#ifdef DEBUG + dev_info(&h->pdev->dev, "number of physical luns is %d\n", *nphysicals); +#endif + if (*nphysicals > HPSA_MAX_PHYS_LUN) { + dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded." + " %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, + *nphysicals - HPSA_MAX_PHYS_LUN); + *nphysicals = HPSA_MAX_PHYS_LUN; + } + if (hpsa_scsi_do_report_log_luns(h, logdev, reportlunsize)) { + dev_err(&h->pdev->dev, "report logical LUNs failed.\n"); + return -1; + } + memcpy(nlogicals, &logdev->LUNListLength[0], sizeof(*nlogicals)); + *nlogicals = be32_to_cpu(*nlogicals) / 8; +#ifdef DEBUG + dev_info(&h->pdev->dev, "number of logical luns is %d\n", *nlogicals); +#endif + /* Reject Logicals in excess of our max capability. */ + if (*nlogicals > HPSA_MAX_LUN) { + dev_warn(&h->pdev->dev, + "maximum logical LUNs (%d) exceeded. " + "%d LUNs ignored.\n", HPSA_MAX_LUN, + *nlogicals - HPSA_MAX_LUN); + *nlogicals = HPSA_MAX_LUN; + } + if (*nlogicals + *nphysicals > HPSA_MAX_PHYS_LUN) { + dev_warn(&h->pdev->dev, + "maximum logical + physical LUNs (%d) exceeded. " + "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, + *nphysicals + *nlogicals - HPSA_MAX_PHYS_LUN); + *nlogicals = HPSA_MAX_PHYS_LUN - *nphysicals; + } + return 0; +} + +static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) +{ + /* the idea here is we could get notified + * that some devices have changed, so we do a report + * physical luns and report logical luns cmd, and adjust + * our list of devices accordingly. + * + * The scsi3addr's of devices won't change so long as the + * adapter is not reset. That means we can rescan and + * tell which devices we already know about, vs. new + * devices, vs. disappearing devices. + */ + struct ReportLUNdata *physdev_list = NULL; + struct ReportLUNdata *logdev_list = NULL; + unsigned char *inq_buff = NULL; + __u32 nphysicals = 0; + __u32 nlogicals = 0; + __u32 ndev_allocated = 0; + struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice; + int ncurrent = 0; + int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8; + int i, nmsa2xxx_enclosures, ndevs_to_allocate; + int bus, target, lun; + DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR); + + currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA, + GFP_KERNEL); + physdev_list = kzalloc(reportlunsize, GFP_KERNEL); + logdev_list = kzalloc(reportlunsize, GFP_KERNEL); + inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); + tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); + + if (!currentsd || !physdev_list || !logdev_list || + !inq_buff || !tmpdevice) { + dev_err(&h->pdev->dev, "out of memory\n"); + goto out; + } + memset(lunzerobits, 0, sizeof(lunzerobits)); + + if (hpsa_gather_lun_info(h, reportlunsize, physdev_list, &nphysicals, + logdev_list, &nlogicals)) + goto out; + + /* We might see up to 32 MSA2xxx enclosures, actually 8 of them + * but each of them 4 times through different paths. The plus 1 + * is for the RAID controller. + */ + ndevs_to_allocate = nphysicals + nlogicals + MAX_MSA2XXX_ENCLOSURES + 1; + + /* Allocate the per device structures */ + for (i = 0; i < ndevs_to_allocate; i++) { + currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL); + if (!currentsd[i]) { + dev_warn(&h->pdev->dev, "out of memory at %s:%d\n", + __FILE__, __LINE__); + goto out; + } + ndev_allocated++; + } + + /* adjust our table of devices */ + nmsa2xxx_enclosures = 0; + for (i = 0; i < nphysicals + nlogicals + 1; i++) { + __u8 *lunaddrbytes; + + /* Figure out where the LUN ID info is coming from */ + if (i < nphysicals) + lunaddrbytes = &physdev_list->LUN[i][0]; + else + if (i < nphysicals + nlogicals) + lunaddrbytes = + &logdev_list->LUN[i-nphysicals][0]; + else /* jam in the RAID controller at the end */ + lunaddrbytes = RAID_CTLR_LUNID; + + /* skip masked physical devices. */ + if (lunaddrbytes[3] & 0xC0 && i < nphysicals) + continue; + + /* Get device type, vendor, model, device id */ + if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice)) + continue; /* skip it if we can't talk to it. */ + figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun, + tmpdevice); + this_device = currentsd[ncurrent]; + + /* + * For the msa2xxx boxes, we have to insert a LUN 0 which + * doesn't show up in CCISS_REPORT_PHYSICAL data, but there + * is nonetheless an enclosure device there. We have to + * present that otherwise linux won't find anything if + * there is no lun 0. + */ + if (add_msa2xxx_enclosure_device(h, tmpdevice, this_device, + lunaddrbytes, bus, target, lun, lunzerobits, + &nmsa2xxx_enclosures)) { + ncurrent++; + this_device = currentsd[ncurrent]; + } + + *this_device = *tmpdevice; + hpsa_set_bus_target_lun(this_device, bus, target, lun); + + switch (this_device->devtype) { + case TYPE_ROM: { + /* We don't *really* support actual CD-ROM devices, + * just "One Button Disaster Recovery" tape drive + * which temporarily pretends to be a CD-ROM drive. + * So we check that the device is really an OBDR tape + * device by checking for "$DR-10" in bytes 43-48 of + * the inquiry data. + */ + char obdr_sig[7]; +#define OBDR_TAPE_SIG "$DR-10" + strncpy(obdr_sig, &inq_buff[43], 6); + obdr_sig[6] = '\0'; + if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0) + /* Not OBDR device, ignore it. */ + break; + } + ncurrent++; + break; + case TYPE_DISK: + if (i < nphysicals) + break; + ncurrent++; + break; + case TYPE_TAPE: + case TYPE_MEDIUM_CHANGER: + ncurrent++; + break; + case TYPE_RAID: + /* Only present the Smartarray HBA as a RAID controller. + * If it's a RAID controller other than the HBA itself + * (an external RAID controller, MSA500 or similar) + * don't present it. + */ + if (!is_hba_lunid(lunaddrbytes)) + break; + ncurrent++; + break; + default: + break; + } + if (ncurrent >= HPSA_MAX_SCSI_DEVS_PER_HBA) + break; + } + adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent); +out: + kfree(tmpdevice); + for (i = 0; i < ndev_allocated; i++) + kfree(currentsd[i]); + kfree(currentsd); + kfree(inq_buff); + kfree(physdev_list); + kfree(logdev_list); + return; +} + +/* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci + * dma mapping and fills in the scatter gather entries of the + * hpsa command, cp. + */ +static int hpsa_scatter_gather(struct pci_dev *pdev, + struct CommandList *cp, + struct scsi_cmnd *cmd) +{ + unsigned int len; + struct scatterlist *sg; + __u64 addr64; + int use_sg, i; + + BUG_ON(scsi_sg_count(cmd) > MAXSGENTRIES); + + use_sg = scsi_dma_map(cmd); + if (use_sg < 0) + return use_sg; + + if (!use_sg) + goto sglist_finished; + + scsi_for_each_sg(cmd, sg, use_sg, i) { + addr64 = (__u64) sg_dma_address(sg); + len = sg_dma_len(sg); + cp->SG[i].Addr.lower = + (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF); + cp->SG[i].Addr.upper = + (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF); + cp->SG[i].Len = len; + cp->SG[i].Ext = 0; /* we are not chaining */ + } + +sglist_finished: + + cp->Header.SGList = (__u8) use_sg; /* no. SGs contig in this cmd */ + cp->Header.SGTotal = (__u16) use_sg; /* total sgs in this cmd list */ + return 0; +} + + +static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + struct ctlr_info *h; + struct hpsa_scsi_dev_t *dev; + unsigned char scsi3addr[8]; + struct CommandList *c; + unsigned long flags; + + /* Get the ptr to our adapter structure out of cmd->host. */ + h = sdev_to_hba(cmd->device); + dev = cmd->device->hostdata; + if (!dev) { + cmd->result = DID_NO_CONNECT << 16; + done(cmd); + return 0; + } + memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); + + /* Need a lock as this is being allocated from the pool */ + spin_lock_irqsave(&h->lock, flags); + c = cmd_alloc(h); + spin_unlock_irqrestore(&h->lock, flags); + if (c == NULL) { /* trouble... */ + dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n"); + return SCSI_MLQUEUE_HOST_BUSY; + } + + /* Fill in the command list header */ + + cmd->scsi_done = done; /* save this for use by completion code */ + + /* save c in case we have to abort it */ + cmd->host_scribble = (unsigned char *) c; + + c->cmd_type = CMD_SCSI; + c->scsi_cmd = cmd; + c->Header.ReplyQueue = 0; /* unused in simple mode */ + memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8); + c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */ + + /* Fill in the request block... */ + + c->Request.Timeout = 0; + memset(c->Request.CDB, 0, sizeof(c->Request.CDB)); + BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB)); + c->Request.CDBLen = cmd->cmd_len; + memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len); + c->Request.Type.Type = TYPE_CMD; + c->Request.Type.Attribute = ATTR_SIMPLE; + switch (cmd->sc_data_direction) { + case DMA_TO_DEVICE: + c->Request.Type.Direction = XFER_WRITE; + break; + case DMA_FROM_DEVICE: + c->Request.Type.Direction = XFER_READ; + break; + case DMA_NONE: + c->Request.Type.Direction = XFER_NONE; + break; + case DMA_BIDIRECTIONAL: + /* This can happen if a buggy application does a scsi passthru + * and sets both inlen and outlen to non-zero. ( see + * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() ) + */ + + c->Request.Type.Direction = XFER_RSVD; + /* This is technically wrong, and hpsa controllers should + * reject it with CMD_INVALID, which is the most correct + * response, but non-fibre backends appear to let it + * slide by, and give the same results as if this field + * were set correctly. Either way is acceptable for + * our purposes here. + */ + + break; + + default: + dev_err(&h->pdev->dev, "unknown data direction: %d\n", + cmd->sc_data_direction); + BUG(); + break; + } + + if (hpsa_scatter_gather(h->pdev, c, cmd) < 0) { /* Fill SG list */ + cmd_free(h, c); + return SCSI_MLQUEUE_HOST_BUSY; + } + enqueue_cmd_and_start_io(h, c); + /* the cmd'll come back via intr handler in complete_scsi_command() */ + return 0; +} + +static void hpsa_unregister_scsi(struct ctlr_info *h) +{ + /* we are being forcibly unloaded, and may not refuse. */ + scsi_remove_host(h->scsi_host); + scsi_host_put(h->scsi_host); + h->scsi_host = NULL; +} + +static int hpsa_register_scsi(struct ctlr_info *h) +{ + int rc; + + hpsa_update_scsi_devices(h, -1); + rc = hpsa_scsi_detect(h); + if (rc != 0) + dev_err(&h->pdev->dev, "hpsa_register_scsi: failed" + " hpsa_scsi_detect(), rc is %d\n", rc); + return rc; +} + +static int wait_for_device_to_become_ready(struct ctlr_info *h, + unsigned char lunaddr[]) +{ + int rc = 0; + int count = 0; + int waittime = 1; /* seconds */ + struct CommandList *c; + + c = cmd_special_alloc(h); + if (!c) { + dev_warn(&h->pdev->dev, "out of memory in " + "wait_for_device_to_become_ready.\n"); + return IO_ERROR; + } + + /* Send test unit ready until device ready, or give up. */ + while (count < HPSA_TUR_RETRY_LIMIT) { + + /* Wait for a bit. do this first, because if we send + * the TUR right away, the reset will just abort it. + */ + msleep(1000 * waittime); + count++; + + /* Increase wait time with each try, up to a point. */ + if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS) + waittime = waittime * 2; + + /* Send the Test Unit Ready */ + fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, lunaddr, TYPE_CMD); + hpsa_scsi_do_simple_cmd_core(h, c); + /* no unmap needed here because no data xfer. */ + + if (c->err_info->CommandStatus == CMD_SUCCESS) + break; + + if (c->err_info->CommandStatus == CMD_TARGET_STATUS && + c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION && + (c->err_info->SenseInfo[2] == NO_SENSE || + c->err_info->SenseInfo[2] == UNIT_ATTENTION)) + break; + + dev_warn(&h->pdev->dev, "waiting %d secs " + "for device to become ready.\n", waittime); + rc = 1; /* device not ready. */ + } + + if (rc) + dev_warn(&h->pdev->dev, "giving up on device.\n"); + else + dev_warn(&h->pdev->dev, "device is ready.\n"); + + cmd_special_free(h, c); + return rc; +} + +/* Need at least one of these error handlers to keep ../scsi/hosts.c from + * complaining. Doing a host- or bus-reset can't do anything good here. + */ +static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) +{ + int rc; + struct ctlr_info *h; + struct hpsa_scsi_dev_t *dev; + + /* find the controller to which the command to be aborted was sent */ + h = sdev_to_hba(scsicmd->device); + if (h == NULL) /* paranoia */ + return FAILED; + dev_warn(&h->pdev->dev, "resetting drive\n"); + + dev = scsicmd->device->hostdata; + if (!dev) { + dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: " + "device lookup failed.\n"); + return FAILED; + } + /* send a reset to the SCSI LUN which the command was sent to */ + rc = hpsa_send_reset(h, dev->scsi3addr); + if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0) + return SUCCESS; + + dev_warn(&h->pdev->dev, "resetting device failed.\n"); + return FAILED; +} + +/* + * For operations that cannot sleep, a command block is allocated at init, + * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track + * which ones are free or in use. Lock must be held when calling this. + * cmd_free() is the complement. + */ +static struct CommandList *cmd_alloc(struct ctlr_info *h) +{ + struct CommandList *c; + int i; + union u64bit temp64; + dma_addr_t cmd_dma_handle, err_dma_handle; + + do { + i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds); + if (i == h->nr_cmds) + return NULL; + } while (test_and_set_bit + (i & (BITS_PER_LONG - 1), + h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0); + c = h->cmd_pool + i; + memset(c, 0, sizeof(*c)); + cmd_dma_handle = h->cmd_pool_dhandle + + i * sizeof(*c); + c->err_info = h->errinfo_pool + i; + memset(c->err_info, 0, sizeof(*c->err_info)); + err_dma_handle = h->errinfo_pool_dhandle + + i * sizeof(*c->err_info); + h->nr_allocs++; + + c->cmdindex = i; + + INIT_HLIST_NODE(&c->list); + c->busaddr = (__u32) cmd_dma_handle; + temp64.val = (__u64) err_dma_handle; + c->ErrDesc.Addr.lower = temp64.val32.lower; + c->ErrDesc.Addr.upper = temp64.val32.upper; + c->ErrDesc.Len = sizeof(*c->err_info); + + c->h = h; + return c; +} + +/* For operations that can wait for kmalloc to possibly sleep, + * this routine can be called. Lock need not be held to call + * cmd_special_alloc. cmd_special_free() is the complement. + */ +static struct CommandList *cmd_special_alloc(struct ctlr_info *h) +{ + struct CommandList *c; + union u64bit temp64; + dma_addr_t cmd_dma_handle, err_dma_handle; + + c = pci_alloc_consistent(h->pdev, sizeof(*c), &cmd_dma_handle); + if (c == NULL) + return NULL; + memset(c, 0, sizeof(*c)); + + c->cmdindex = -1; + + c->err_info = pci_alloc_consistent(h->pdev, sizeof(*c->err_info), + &err_dma_handle); + + if (c->err_info == NULL) { + pci_free_consistent(h->pdev, + sizeof(*c), c, cmd_dma_handle); + return NULL; + } + memset(c->err_info, 0, sizeof(*c->err_info)); + + INIT_HLIST_NODE(&c->list); + c->busaddr = (__u32) cmd_dma_handle; + temp64.val = (__u64) err_dma_handle; + c->ErrDesc.Addr.lower = temp64.val32.lower; + c->ErrDesc.Addr.upper = temp64.val32.upper; + c->ErrDesc.Len = sizeof(*c->err_info); + + c->h = h; + return c; +} + +static void cmd_free(struct ctlr_info *h, struct CommandList *c) +{ + int i; + + i = c - h->cmd_pool; + clear_bit(i & (BITS_PER_LONG - 1), + h->cmd_pool_bits + (i / BITS_PER_LONG)); + h->nr_frees++; +} + +static void cmd_special_free(struct ctlr_info *h, struct CommandList *c) +{ + union u64bit temp64; + + temp64.val32.lower = c->ErrDesc.Addr.lower; + temp64.val32.upper = c->ErrDesc.Addr.upper; + pci_free_consistent(h->pdev, sizeof(*c->err_info), + c->err_info, (dma_addr_t) temp64.val); + pci_free_consistent(h->pdev, sizeof(*c), + c, (dma_addr_t) c->busaddr); +} + +#ifdef CONFIG_COMPAT + +static int do_ioctl(struct scsi_device *dev, int cmd, void *arg) +{ + int ret; + + lock_kernel(); + ret = hpsa_ioctl(dev, cmd, arg); + unlock_kernel(); + return ret; +} + +static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg); +static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, + int cmd, void *arg); + +static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg) +{ + switch (cmd) { + case CCISS_GETPCIINFO: + case CCISS_GETINTINFO: + case CCISS_SETINTINFO: + case CCISS_GETNODENAME: + case CCISS_SETNODENAME: + case CCISS_GETHEARTBEAT: + case CCISS_GETBUSTYPES: + case CCISS_GETFIRMVER: + case CCISS_GETDRIVVER: + case CCISS_REVALIDVOLS: + case CCISS_DEREGDISK: + case CCISS_REGNEWDISK: + case CCISS_REGNEWD: + case CCISS_RESCANDISK: + case CCISS_GETLUNINFO: + return do_ioctl(dev, cmd, arg); + + case CCISS_PASSTHRU32: + return hpsa_ioctl32_passthru(dev, cmd, arg); + case CCISS_BIG_PASSTHRU32: + return hpsa_ioctl32_big_passthru(dev, cmd, arg); + + default: + return -ENOIOCTLCMD; + } +} + +static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg) +{ + IOCTL32_Command_struct __user *arg32 = + (IOCTL32_Command_struct __user *) arg; + IOCTL_Command_struct arg64; + IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64)); + int err; + u32 cp; + + err = 0; + err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, + sizeof(arg64.LUN_info)); + err |= copy_from_user(&arg64.Request, &arg32->Request, + sizeof(arg64.Request)); + err |= copy_from_user(&arg64.error_info, &arg32->error_info, + sizeof(arg64.error_info)); + err |= get_user(arg64.buf_size, &arg32->buf_size); + err |= get_user(cp, &arg32->buf); + arg64.buf = compat_ptr(cp); + err |= copy_to_user(p, &arg64, sizeof(arg64)); + + if (err) + return -EFAULT; + + err = do_ioctl(dev, CCISS_PASSTHRU, (void *)p); + if (err) + return err; + err |= copy_in_user(&arg32->error_info, &p->error_info, + sizeof(arg32->error_info)); + if (err) + return -EFAULT; + return err; +} + +static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, + int cmd, void *arg) +{ + BIG_IOCTL32_Command_struct __user *arg32 = + (BIG_IOCTL32_Command_struct __user *) arg; + BIG_IOCTL_Command_struct arg64; + BIG_IOCTL_Command_struct __user *p = + compat_alloc_user_space(sizeof(arg64)); + int err; + u32 cp; + + err = 0; + err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, + sizeof(arg64.LUN_info)); + err |= copy_from_user(&arg64.Request, &arg32->Request, + sizeof(arg64.Request)); + err |= copy_from_user(&arg64.error_info, &arg32->error_info, + sizeof(arg64.error_info)); + err |= get_user(arg64.buf_size, &arg32->buf_size); + err |= get_user(arg64.malloc_size, &arg32->malloc_size); + err |= get_user(cp, &arg32->buf); + arg64.buf = compat_ptr(cp); + err |= copy_to_user(p, &arg64, sizeof(arg64)); + + if (err) + return -EFAULT; + + err = do_ioctl(dev, CCISS_BIG_PASSTHRU, (void *)p); + if (err) + return err; + err |= copy_in_user(&arg32->error_info, &p->error_info, + sizeof(arg32->error_info)); + if (err) + return -EFAULT; + return err; +} +#endif + +static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp) +{ + struct hpsa_pci_info pciinfo; + + if (!argp) + return -EINVAL; + pciinfo.domain = pci_domain_nr(h->pdev->bus); + pciinfo.bus = h->pdev->bus->number; + pciinfo.dev_fn = h->pdev->devfn; + pciinfo.board_id = h->board_id; + if (copy_to_user(argp, &pciinfo, sizeof(pciinfo))) + return -EFAULT; + return 0; +} + +static int hpsa_getdrivver_ioctl(struct ctlr_info *h, void __user *argp) +{ + DriverVer_type DriverVer; + unsigned char vmaj, vmin, vsubmin; + int rc; + + rc = sscanf(HPSA_DRIVER_VERSION, "%hhu.%hhu.%hhu", + &vmaj, &vmin, &vsubmin); + if (rc != 3) { + dev_info(&h->pdev->dev, "driver version string '%s' " + "unrecognized.", HPSA_DRIVER_VERSION); + vmaj = 0; + vmin = 0; + vsubmin = 0; + } + DriverVer = (vmaj << 16) | (vmin << 8) | vsubmin; + if (!argp) + return -EINVAL; + if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type))) + return -EFAULT; + return 0; +} + +static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) +{ + IOCTL_Command_struct iocommand; + struct CommandList *c; + char *buff = NULL; + union u64bit temp64; + + if (!argp) + return -EINVAL; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + if (copy_from_user(&iocommand, argp, sizeof(iocommand))) + return -EFAULT; + if ((iocommand.buf_size < 1) && + (iocommand.Request.Type.Direction != XFER_NONE)) { + return -EINVAL; + } + if (iocommand.buf_size > 0) { + buff = kmalloc(iocommand.buf_size, GFP_KERNEL); + if (buff == NULL) + return -EFAULT; + } + if (iocommand.Request.Type.Direction == XFER_WRITE) { + /* Copy the data into the buffer we created */ + if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) { + kfree(buff); + return -EFAULT; + } + } else + memset(buff, 0, iocommand.buf_size); + c = cmd_special_alloc(h); + if (c == NULL) { + kfree(buff); + return -ENOMEM; + } + /* Fill in the command type */ + c->cmd_type = CMD_IOCTL_PEND; + /* Fill in Command Header */ + c->Header.ReplyQueue = 0; /* unused in simple mode */ + if (iocommand.buf_size > 0) { /* buffer to fill */ + c->Header.SGList = 1; + c->Header.SGTotal = 1; + } else { /* no buffers to fill */ + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN)); + /* use the kernel address the cmd block for tag */ + c->Header.Tag.lower = c->busaddr; + + /* Fill in Request block */ + memcpy(&c->Request, &iocommand.Request, + sizeof(c->Request)); + + /* Fill in the scatter gather information */ + if (iocommand.buf_size > 0) { + temp64.val = pci_map_single(h->pdev, buff, + iocommand.buf_size, PCI_DMA_BIDIRECTIONAL); + c->SG[0].Addr.lower = temp64.val32.lower; + c->SG[0].Addr.upper = temp64.val32.upper; + c->SG[0].Len = iocommand.buf_size; + c->SG[0].Ext = 0; /* we are not chaining*/ + } + hpsa_scsi_do_simple_cmd_core(h, c); + hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); + check_ioctl_unit_attention(h, c); + + /* Copy the error information out */ + memcpy(&iocommand.error_info, c->err_info, + sizeof(iocommand.error_info)); + if (copy_to_user(argp, &iocommand, sizeof(iocommand))) { + kfree(buff); + cmd_special_free(h, c); + return -EFAULT; + } + + if (iocommand.Request.Type.Direction == XFER_READ) { + /* Copy the data out of the buffer we created */ + if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) { + kfree(buff); + cmd_special_free(h, c); + return -EFAULT; + } + } + kfree(buff); + cmd_special_free(h, c); + return 0; +} + +static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) +{ + BIG_IOCTL_Command_struct *ioc; + struct CommandList *c; + unsigned char **buff = NULL; + int *buff_size = NULL; + union u64bit temp64; + BYTE sg_used = 0; + int status = 0; + int i; + __u32 left; + __u32 sz; + BYTE __user *data_ptr; + + if (!argp) + return -EINVAL; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + ioc = (BIG_IOCTL_Command_struct *) + kmalloc(sizeof(*ioc), GFP_KERNEL); + if (!ioc) { + status = -ENOMEM; + goto cleanup1; + } + if (copy_from_user(ioc, argp, sizeof(*ioc))) { + status = -EFAULT; + goto cleanup1; + } + if ((ioc->buf_size < 1) && + (ioc->Request.Type.Direction != XFER_NONE)) { + status = -EINVAL; + goto cleanup1; + } + /* Check kmalloc limits using all SGs */ + if (ioc->malloc_size > MAX_KMALLOC_SIZE) { + status = -EINVAL; + goto cleanup1; + } + if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) { + status = -EINVAL; + goto cleanup1; + } + buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL); + if (!buff) { + status = -ENOMEM; + goto cleanup1; + } + buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL); + if (!buff_size) { + status = -ENOMEM; + goto cleanup1; + } + left = ioc->buf_size; + data_ptr = ioc->buf; + while (left) { + sz = (left > ioc->malloc_size) ? ioc->malloc_size : left; + buff_size[sg_used] = sz; + buff[sg_used] = kmalloc(sz, GFP_KERNEL); + if (buff[sg_used] == NULL) { + status = -ENOMEM; + goto cleanup1; + } + if (ioc->Request.Type.Direction == XFER_WRITE) { + if (copy_from_user(buff[sg_used], data_ptr, sz)) { + status = -ENOMEM; + goto cleanup1; + } + } else + memset(buff[sg_used], 0, sz); + left -= sz; + data_ptr += sz; + sg_used++; + } + c = cmd_special_alloc(h); + if (c == NULL) { + status = -ENOMEM; + goto cleanup1; + } + c->cmd_type = CMD_IOCTL_PEND; + c->Header.ReplyQueue = 0; + + if (ioc->buf_size > 0) { + c->Header.SGList = sg_used; + c->Header.SGTotal = sg_used; + } else { + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN)); + c->Header.Tag.lower = c->busaddr; + memcpy(&c->Request, &ioc->Request, sizeof(c->Request)); + if (ioc->buf_size > 0) { + int i; + for (i = 0; i < sg_used; i++) { + temp64.val = pci_map_single(h->pdev, buff[i], + buff_size[i], PCI_DMA_BIDIRECTIONAL); + c->SG[i].Addr.lower = temp64.val32.lower; + c->SG[i].Addr.upper = temp64.val32.upper; + c->SG[i].Len = buff_size[i]; + /* we are not chaining */ + c->SG[i].Ext = 0; + } + } + hpsa_scsi_do_simple_cmd_core(h, c); + hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL); + check_ioctl_unit_attention(h, c); + /* Copy the error information out */ + memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info)); + if (copy_to_user(argp, ioc, sizeof(*ioc))) { + cmd_special_free(h, c); + status = -EFAULT; + goto cleanup1; + } + if (ioc->Request.Type.Direction == XFER_READ) { + /* Copy the data out of the buffer we created */ + BYTE __user *ptr = ioc->buf; + for (i = 0; i < sg_used; i++) { + if (copy_to_user(ptr, buff[i], buff_size[i])) { + cmd_special_free(h, c); + status = -EFAULT; + goto cleanup1; + } + ptr += buff_size[i]; + } + } + cmd_special_free(h, c); + status = 0; +cleanup1: + if (buff) { + for (i = 0; i < sg_used; i++) + kfree(buff[i]); + kfree(buff); + } + kfree(buff_size); + kfree(ioc); + return status; +} + +static void check_ioctl_unit_attention(struct ctlr_info *h, + struct CommandList *c) +{ + if (c->err_info->CommandStatus == CMD_TARGET_STATUS && + c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) + (void) check_for_unit_attention(h, c); +} +/* + * ioctl + */ +static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg) +{ + struct ctlr_info *h; + void __user *argp = (void __user *)arg; + + h = sdev_to_hba(dev); + + switch (cmd) { + case CCISS_DEREGDISK: + case CCISS_REGNEWDISK: + case CCISS_REGNEWD: + hpsa_update_scsi_devices(h, dev->host->host_no); + return 0; + case CCISS_GETPCIINFO: + return hpsa_getpciinfo_ioctl(h, argp); + case CCISS_GETDRIVVER: + return hpsa_getdrivver_ioctl(h, argp); + case CCISS_PASSTHRU: + return hpsa_passthru_ioctl(h, argp); + case CCISS_BIG_PASSTHRU: + return hpsa_big_passthru_ioctl(h, argp); + default: + return -ENOTTY; + } +} + +static void fill_cmd(struct CommandList *c, __u8 cmd, struct ctlr_info *h, + void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr, + int cmd_type) +{ + int pci_dir = XFER_NONE; + + c->cmd_type = CMD_IOCTL_PEND; + c->Header.ReplyQueue = 0; + if (buff != NULL && size > 0) { + c->Header.SGList = 1; + c->Header.SGTotal = 1; + } else { + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + c->Header.Tag.lower = c->busaddr; + memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); + + c->Request.Type.Type = cmd_type; + if (cmd_type == TYPE_CMD) { + switch (cmd) { + case HPSA_INQUIRY: + /* are we trying to read a vital product page */ + if (page_code != 0) { + c->Request.CDB[1] = 0x01; + c->Request.CDB[2] = page_code; + } + c->Request.CDBLen = 6; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = HPSA_INQUIRY; + c->Request.CDB[4] = size & 0xFF; + break; + case HPSA_REPORT_LOG: + case HPSA_REPORT_PHYS: + /* Talking to controller so It's a physical command + mode = 00 target = 0. Nothing to write. + */ + c->Request.CDBLen = 12; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = cmd; + c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */ + c->Request.CDB[7] = (size >> 16) & 0xFF; + c->Request.CDB[8] = (size >> 8) & 0xFF; + c->Request.CDB[9] = size & 0xFF; + break; + + case HPSA_READ_CAPACITY: + c->Request.CDBLen = 10; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = cmd; + break; + case HPSA_CACHE_FLUSH: + c->Request.CDBLen = 12; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_WRITE; + c->Request.Timeout = 0; + c->Request.CDB[0] = BMIC_WRITE; + c->Request.CDB[6] = BMIC_CACHE_FLUSH; + break; + case TEST_UNIT_READY: + c->Request.CDBLen = 6; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_NONE; + c->Request.Timeout = 0; + break; + default: + dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd); + BUG(); + return; + } + } else if (cmd_type == TYPE_MSG) { + switch (cmd) { + + case HPSA_DEVICE_RESET_MSG: + c->Request.CDBLen = 16; + c->Request.Type.Type = 1; /* It is a MSG not a CMD */ + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_NONE; + c->Request.Timeout = 0; /* Don't time out */ + c->Request.CDB[0] = 0x01; /* RESET_MSG is 0x01 */ + c->Request.CDB[1] = 0x03; /* Reset target above */ + /* If bytes 4-7 are zero, it means reset the */ + /* LunID device */ + c->Request.CDB[4] = 0x00; + c->Request.CDB[5] = 0x00; + c->Request.CDB[6] = 0x00; + c->Request.CDB[7] = 0x00; + break; + + default: + dev_warn(&h->pdev->dev, "unknown message type %d\n", + cmd); + BUG(); + } + } else { + dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type); + BUG(); + } + + switch (c->Request.Type.Direction) { + case XFER_READ: + pci_dir = PCI_DMA_FROMDEVICE; + break; + case XFER_WRITE: + pci_dir = PCI_DMA_TODEVICE; + break; + case XFER_NONE: + pci_dir = PCI_DMA_NONE; + break; + default: + pci_dir = PCI_DMA_BIDIRECTIONAL; + } + + hpsa_map_one(h->pdev, c, buff, size, pci_dir); + + return; +} + +/* + * Map (physical) PCI mem into (virtual) kernel space + */ +static void __iomem *remap_pci_mem(ulong base, ulong size) +{ + ulong page_base = ((ulong) base) & PAGE_MASK; + ulong page_offs = ((ulong) base) - page_base; + void __iomem *page_remapped = ioremap(page_base, page_offs + size); + + return page_remapped ? (page_remapped + page_offs) : NULL; +} + +/* Takes cmds off the submission queue and sends them to the hardware, + * then puts them on the queue of cmds waiting for completion. + */ +static void start_io(struct ctlr_info *h) +{ + struct CommandList *c; + + while (!hlist_empty(&h->reqQ)) { + c = hlist_entry(h->reqQ.first, struct CommandList, list); + /* can't do anything if fifo is full */ + if ((h->access.fifo_full(h))) { + dev_warn(&h->pdev->dev, "fifo full\n"); + break; + } + + /* Get the first entry from the Request Q */ + removeQ(c); + h->Qdepth--; + + /* Tell the controller execute command */ + h->access.submit_command(h, c); + + /* Put job onto the completed Q */ + addQ(&h->cmpQ, c); + } +} + +static inline unsigned long get_next_completion(struct ctlr_info *h) +{ + return h->access.command_completed(h); +} + +static inline int interrupt_pending(struct ctlr_info *h) +{ + return h->access.intr_pending(h); +} + +static inline long interrupt_not_for_us(struct ctlr_info *h) +{ + return ((h->access.intr_pending(h) == 0) || + (h->interrupts_enabled == 0)); +} + +static inline int bad_tag(struct ctlr_info *h, __u32 tag_index, + __u32 raw_tag) +{ + if (unlikely(tag_index >= h->nr_cmds)) { + dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag); + return 1; + } + return 0; +} + +static inline void finish_cmd(struct CommandList *c, __u32 raw_tag) +{ + removeQ(c); + if (likely(c->cmd_type == CMD_SCSI)) + complete_scsi_command(c, 0, raw_tag); + else if (c->cmd_type == CMD_IOCTL_PEND) + complete(c->waiting); +} + +static irqreturn_t do_hpsa_intr(int irq, void *dev_id) +{ + struct ctlr_info *h = dev_id; + struct CommandList *c; + unsigned long flags; + __u32 raw_tag, tag, tag_index; + struct hlist_node *tmp; + + if (interrupt_not_for_us(h)) + return IRQ_NONE; + spin_lock_irqsave(&h->lock, flags); + while (interrupt_pending(h)) { + while ((raw_tag = get_next_completion(h)) != FIFO_EMPTY) { + if (likely(HPSA_TAG_CONTAINS_INDEX(raw_tag))) { + tag_index = HPSA_TAG_TO_INDEX(raw_tag); + if (bad_tag(h, tag_index, raw_tag)) + return IRQ_HANDLED; + c = h->cmd_pool + tag_index; + finish_cmd(c, raw_tag); + continue; + } + tag = HPSA_TAG_DISCARD_ERROR_BITS(raw_tag); + c = NULL; + hlist_for_each_entry(c, tmp, &h->cmpQ, list) { + if (c->busaddr == tag) { + finish_cmd(c, raw_tag); + break; + } + } + } + } + spin_unlock_irqrestore(&h->lock, flags); + return IRQ_HANDLED; +} + +/* Send a message CDB to the firmware. */ +static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode, + unsigned char type) +{ + struct Command { + struct CommandListHeader CommandHeader; + struct RequestBlock Request; + struct ErrDescriptor ErrorDescriptor; + }; + struct Command *cmd; + static const size_t cmd_sz = sizeof(*cmd) + + sizeof(cmd->ErrorDescriptor); + dma_addr_t paddr64; + uint32_t paddr32, tag; + void __iomem *vaddr; + int i, err; + + vaddr = pci_ioremap_bar(pdev, 0); + if (vaddr == NULL) + return -ENOMEM; + + /* The Inbound Post Queue only accepts 32-bit physical addresses for the + * CCISS commands, so they must be allocated from the lower 4GiB of + * memory. + */ + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + iounmap(vaddr); + return -ENOMEM; + } + + cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64); + if (cmd == NULL) { + iounmap(vaddr); + return -ENOMEM; + } + + /* This must fit, because of the 32-bit consistent DMA mask. Also, + * although there's no guarantee, we assume that the address is at + * least 4-byte aligned (most likely, it's page-aligned). + */ + paddr32 = paddr64; + + cmd->CommandHeader.ReplyQueue = 0; + cmd->CommandHeader.SGList = 0; + cmd->CommandHeader.SGTotal = 0; + cmd->CommandHeader.Tag.lower = paddr32; + cmd->CommandHeader.Tag.upper = 0; + memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); + + cmd->Request.CDBLen = 16; + cmd->Request.Type.Type = TYPE_MSG; + cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE; + cmd->Request.Type.Direction = XFER_NONE; + cmd->Request.Timeout = 0; /* Don't time out */ + cmd->Request.CDB[0] = opcode; + cmd->Request.CDB[1] = type; + memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */ + cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(*cmd); + cmd->ErrorDescriptor.Addr.upper = 0; + cmd->ErrorDescriptor.Len = sizeof(struct ErrorInfo); + + writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET); + + for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) { + tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); + if (HPSA_TAG_DISCARD_ERROR_BITS(tag) == paddr32) + break; + msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS); + } + + iounmap(vaddr); + + /* we leak the DMA buffer here ... no choice since the controller could + * still complete the command. + */ + if (i == HPSA_MSG_SEND_RETRY_LIMIT) { + dev_err(&pdev->dev, "controller message %02x:%02x timed out\n", + opcode, type); + return -ETIMEDOUT; + } + + pci_free_consistent(pdev, cmd_sz, cmd, paddr64); + + if (tag & HPSA_ERROR_BIT) { + dev_err(&pdev->dev, "controller message %02x:%02x failed\n", + opcode, type); + return -EIO; + } + + dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n", + opcode, type); + return 0; +} + +#define hpsa_soft_reset_controller(p) hpsa_message(p, 1, 0) +#define hpsa_noop(p) hpsa_message(p, 3, 0) + +static __devinit int hpsa_reset_msi(struct pci_dev *pdev) +{ +/* the #defines are stolen from drivers/pci/msi.h. */ +#define msi_control_reg(base) (base + PCI_MSI_FLAGS) +#define PCI_MSIX_FLAGS_ENABLE (1 << 15) + + int pos; + u16 control = 0; + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSI_FLAGS_ENABLE) { + dev_info(&pdev->dev, "resetting MSI\n"); + pci_write_config_word(pdev, msi_control_reg(pos), + control & ~PCI_MSI_FLAGS_ENABLE); + } + } + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSIX_FLAGS_ENABLE) { + dev_info(&pdev->dev, "resetting MSI-X\n"); + pci_write_config_word(pdev, msi_control_reg(pos), + control & ~PCI_MSIX_FLAGS_ENABLE); + } + } + + return 0; +} + +/* This does a hard reset of the controller using PCI power management + * states. + */ +static __devinit int hpsa_hard_reset_controller(struct pci_dev *pdev) +{ + u16 pmcsr, saved_config_space[32]; + int i, pos; + + dev_info(&pdev->dev, "using PCI PM to reset controller\n"); + + /* This is very nearly the same thing as + * + * pci_save_state(pci_dev); + * pci_set_power_state(pci_dev, PCI_D3hot); + * pci_set_power_state(pci_dev, PCI_D0); + * pci_restore_state(pci_dev); + * + * but we can't use these nice canned kernel routines on + * kexec, because they also check the MSI/MSI-X state in PCI + * configuration space and do the wrong thing when it is + * set/cleared. Also, the pci_save/restore_state functions + * violate the ordering requirements for restoring the + * configuration space from the CCISS document (see the + * comment below). So we roll our own .... + */ + + for (i = 0; i < 32; i++) + pci_read_config_word(pdev, 2*i, &saved_config_space[i]); + + pos = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pos == 0) { + dev_err(&pdev->dev, + "hpsa_reset_controller: PCI PM not supported\n"); + return -ENODEV; + } + + /* Quoting from the Open CISS Specification: "The Power + * Management Control/Status Register (CSR) controls the power + * state of the device. The normal operating state is D0, + * CSR=00h. The software off state is D3, CSR=03h. To reset + * the controller, place the interface device in D3 then to + * D0, this causes a secondary PCI reset which will reset the + * controller." + */ + + /* enter the D3hot power management state */ + pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D3hot; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + msleep(500); + + /* enter the D0 power management state */ + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D0; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + msleep(500); + + /* Restore the PCI configuration space. The Open CISS + * Specification says, "Restore the PCI Configuration + * Registers, offsets 00h through 60h. It is important to + * restore the command register, 16-bits at offset 04h, + * last. Do not restore the configuration status register, + * 16-bits at offset 06h." Note that the offset is 2*i. + */ + for (i = 0; i < 32; i++) { + if (i == 2 || i == 3) + continue; + pci_write_config_word(pdev, 2*i, saved_config_space[i]); + } + wmb(); + pci_write_config_word(pdev, 4, saved_config_space[2]); + + return 0; +} + +/* + * We cannot read the structure directly, for portability we must use + * the io functions. + * This is for debug only. + */ +#ifdef HPSA_DEBUG +static void print_cfg_table(struct device *dev, struct CfgTable *tb) +{ + int i; + char temp_name[17]; + + dev_info(dev, "Controller Configuration information\n"); + dev_info(dev, "------------------------------------\n"); + for (i = 0; i < 4; i++) + temp_name[i] = readb(&(tb->Signature[i])); + temp_name[4] = '\0'; + dev_info(dev, " Signature = %s\n", temp_name); + dev_info(dev, " Spec Number = %d\n", readl(&(tb->SpecValence))); + dev_info(dev, " Transport methods supported = 0x%x\n", + readl(&(tb->TransportSupport))); + dev_info(dev, " Transport methods active = 0x%x\n", + readl(&(tb->TransportActive))); + dev_info(dev, " Requested transport Method = 0x%x\n", + readl(&(tb->HostWrite.TransportRequest))); + dev_info(dev, " Coalesce Interrupt Delay = 0x%x\n", + readl(&(tb->HostWrite.CoalIntDelay))); + dev_info(dev, " Coalesce Interrupt Count = 0x%x\n", + readl(&(tb->HostWrite.CoalIntCount))); + dev_info(dev, " Max outstanding commands = 0x%d\n", + readl(&(tb->CmdsOutMax))); + dev_info(dev, " Bus Types = 0x%x\n", readl(&(tb->BusTypes))); + for (i = 0; i < 16; i++) + temp_name[i] = readb(&(tb->ServerName[i])); + temp_name[16] = '\0'; + dev_info(dev, " Server Name = %s\n", temp_name); + dev_info(dev, " Heartbeat Counter = 0x%x\n\n\n", + readl(&(tb->HeartBeat))); +} +#endif /* HPSA_DEBUG */ + +static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) +{ + int i, offset, mem_type, bar_type; + + if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */ + return 0; + offset = 0; + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE; + if (bar_type == PCI_BASE_ADDRESS_SPACE_IO) + offset += 4; + else { + mem_type = pci_resource_flags(pdev, i) & + PCI_BASE_ADDRESS_MEM_TYPE_MASK; + switch (mem_type) { + case PCI_BASE_ADDRESS_MEM_TYPE_32: + case PCI_BASE_ADDRESS_MEM_TYPE_1M: + offset += 4; /* 32 bit */ + break; + case PCI_BASE_ADDRESS_MEM_TYPE_64: + offset += 8; + break; + default: /* reserved in PCI 2.2 */ + dev_warn(&pdev->dev, + "base address is invalid\n"); + return -1; + break; + } + } + if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0) + return i + 1; + } + return -1; +} + +/* If MSI/MSI-X is supported by the kernel we will try to enable it on + * controllers that are capable. If not, we use IO-APIC mode. + */ + +static void __devinit hpsa_interrupt_mode(struct ctlr_info *h, + struct pci_dev *pdev, __u32 board_id) +{ +#ifdef CONFIG_PCI_MSI + int err; + struct msix_entry hpsa_msix_entries[4] = { {0, 0}, {0, 1}, + {0, 2}, {0, 3} + }; + + /* Some boards advertise MSI but don't really support it */ + if ((board_id == 0x40700E11) || + (board_id == 0x40800E11) || + (board_id == 0x40820E11) || (board_id == 0x40830E11)) + goto default_int_mode; + if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) { + dev_info(&pdev->dev, "MSIX\n"); + err = pci_enable_msix(pdev, hpsa_msix_entries, 4); + if (!err) { + h->intr[0] = hpsa_msix_entries[0].vector; + h->intr[1] = hpsa_msix_entries[1].vector; + h->intr[2] = hpsa_msix_entries[2].vector; + h->intr[3] = hpsa_msix_entries[3].vector; + h->msix_vector = 1; + return; + } + if (err > 0) { + dev_warn(&pdev->dev, "only %d MSI-X vectors " + "available\n", err); + goto default_int_mode; + } else { + dev_warn(&pdev->dev, "MSI-X init failed %d\n", + err); + goto default_int_mode; + } + } + if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) { + dev_info(&pdev->dev, "MSI\n"); + if (!pci_enable_msi(pdev)) + h->msi_vector = 1; + else + dev_warn(&pdev->dev, "MSI init failed\n"); + } +default_int_mode: +#endif /* CONFIG_PCI_MSI */ + /* if we get here we're going to use the default interrupt mode */ + h->intr[SIMPLE_MODE_INT] = pdev->irq; + return; +} + +static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev) +{ + ushort subsystem_vendor_id, subsystem_device_id, command; + __u32 board_id, scratchpad = 0; + __u64 cfg_offset; + __u32 cfg_base_addr; + __u64 cfg_base_addr_index; + int i, prod_index, err; + + subsystem_vendor_id = pdev->subsystem_vendor; + subsystem_device_id = pdev->subsystem_device; + board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) | + subsystem_vendor_id); + + for (i = 0; i < ARRAY_SIZE(products); i++) + if (board_id == products[i].board_id) + break; + + prod_index = i; + + if (prod_index == ARRAY_SIZE(products)) { + prod_index--; + if (subsystem_vendor_id != PCI_VENDOR_ID_HP || + !hpsa_allow_any) { + dev_warn(&pdev->dev, "unrecognized board ID:" + " 0x%08lx, ignoring.\n", + (unsigned long) board_id); + return -ENODEV; + } + } + /* check to see if controller has been disabled + * BEFORE trying to enable it + */ + (void)pci_read_config_word(pdev, PCI_COMMAND, &command); + if (!(command & 0x02)) { + dev_warn(&pdev->dev, "controller appears to be disabled\n"); + return -ENODEV; + } + + err = pci_enable_device(pdev); + if (err) { + dev_warn(&pdev->dev, "unable to enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, "hpsa"); + if (err) { + dev_err(&pdev->dev, "cannot obtain PCI resources, aborting\n"); + return err; + } + + /* If the kernel supports MSI/MSI-X we will try to enable that, + * else we use the IO-APIC interrupt assigned to us by system ROM. + */ + hpsa_interrupt_mode(h, pdev, board_id); + + /* find the memory BAR */ + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) + break; + } + if (i == DEVICE_COUNT_RESOURCE) { + dev_warn(&pdev->dev, "no memory BAR found\n"); + err = -ENODEV; + goto err_out_free_res; + } + + h->paddr = pci_resource_start(pdev, i); /* addressing mode bits + * already removed + */ + + h->vaddr = remap_pci_mem(h->paddr, 0x250); + + /* Wait for the board to become ready. */ + for (i = 0; i < HPSA_BOARD_READY_ITERATIONS; i++) { + scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); + if (scratchpad == HPSA_FIRMWARE_READY) + break; + msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS); + } + if (scratchpad != HPSA_FIRMWARE_READY) { + dev_warn(&pdev->dev, "board not ready, timed out.\n"); + err = -ENODEV; + goto err_out_free_res; + } + + /* get the address index number */ + cfg_base_addr = readl(h->vaddr + SA5_CTCFG_OFFSET); + cfg_base_addr &= (__u32) 0x0000ffff; + cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr); + if (cfg_base_addr_index == -1) { + dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n"); + err = -ENODEV; + goto err_out_free_res; + } + + cfg_offset = readl(h->vaddr + SA5_CTMEM_OFFSET); + h->cfgtable = remap_pci_mem(pci_resource_start(pdev, + cfg_base_addr_index) + cfg_offset, + sizeof(h->cfgtable)); + h->board_id = board_id; + + /* Query controller for max supported commands: */ + h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); + + h->product_name = products[prod_index].product_name; + h->access = *(products[prod_index].access); + /* Allow room for some ioctls */ + h->nr_cmds = h->max_commands - 4; + + if ((readb(&h->cfgtable->Signature[0]) != 'C') || + (readb(&h->cfgtable->Signature[1]) != 'I') || + (readb(&h->cfgtable->Signature[2]) != 'S') || + (readb(&h->cfgtable->Signature[3]) != 'S')) { + dev_warn(&pdev->dev, "not a valid CISS config table\n"); + err = -ENODEV; + goto err_out_free_res; + } +#ifdef CONFIG_X86 + { + /* Need to enable prefetch in the SCSI core for 6400 in x86 */ + __u32 prefetch; + prefetch = readl(&(h->cfgtable->SCSI_Prefetch)); + prefetch |= 0x100; + writel(prefetch, &(h->cfgtable->SCSI_Prefetch)); + } +#endif + + /* Disabling DMA prefetch for the P600 + * An ASIC bug may result in a prefetch beyond + * physical memory. + */ + if (board_id == 0x3225103C) { + __u32 dma_prefetch; + dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG); + dma_prefetch |= 0x8000; + writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); + } + + h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); + /* Update the field, and then ring the doorbell */ + writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); + + /* under certain very rare conditions, this can take awhile. + * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right + * as we enter this code.) + */ + for (i = 0; i < MAX_CONFIG_WAIT; i++) { + if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) + break; + /* delay and try again */ + msleep(10); + } + +#ifdef HPSA_DEBUG + print_cfg_table(&pdev->dev, h->cfgtable); +#endif /* HPSA_DEBUG */ + + if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { + dev_warn(&pdev->dev, "unable to get board into simple mode\n"); + err = -ENODEV; + goto err_out_free_res; + } + return 0; + +err_out_free_res: + /* + * Deliberately omit pci_disable_device(): it does something nasty to + * Smart Array controllers that pci_enable_device does not undo + */ + pci_release_regions(pdev); + return err; +} + +static int __devinit hpsa_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int i; + int dac; + struct ctlr_info *h; + + if (number_of_controllers == 0) + printk(KERN_INFO DRIVER_NAME "\n"); + if (reset_devices) { + /* Reset the controller with a PCI power-cycle */ + if (hpsa_hard_reset_controller(pdev) || hpsa_reset_msi(pdev)) + return -ENODEV; + + /* Some devices (notably the HP Smart Array 5i Controller) + need a little pause here */ + msleep(HPSA_POST_RESET_PAUSE_MSECS); + + /* Now try to get the controller to respond to a no-op */ + for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) { + if (hpsa_noop(pdev) == 0) + break; + else + dev_warn(&pdev->dev, "no-op failed%s\n", + (i < 11 ? "; re-trying" : "")); + } + } + + BUILD_BUG_ON(sizeof(struct CommandList) % 8); + h = kzalloc(sizeof(*h), GFP_KERNEL); + if (!h) + return -1; + + h->busy_initializing = 1; + INIT_HLIST_HEAD(&h->cmpQ); + INIT_HLIST_HEAD(&h->reqQ); + mutex_init(&h->busy_shutting_down); + init_completion(&h->scan_wait); + if (hpsa_pci_init(h, pdev) != 0) + goto clean1; + + sprintf(h->devname, "hpsa%d", number_of_controllers); + h->ctlr = number_of_controllers; + number_of_controllers++; + h->pdev = pdev; + + /* configure PCI DMA stuff */ + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) + dac = 1; + else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) + dac = 0; + else { + dev_err(&pdev->dev, "no suitable DMA available\n"); + goto clean1; + } + + /* make sure the board interrupts are off */ + h->access.set_intr_mask(h, HPSA_INTR_OFF); + if (request_irq(h->intr[SIMPLE_MODE_INT], do_hpsa_intr, + IRQF_DISABLED | IRQF_SHARED, h->devname, h)) { + dev_err(&pdev->dev, "unable to get irq %d for %s\n", + h->intr[SIMPLE_MODE_INT], h->devname); + goto clean2; + } + + dev_info(&pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n", + h->devname, pdev->device, pci_name(pdev), + h->intr[SIMPLE_MODE_INT], dac ? "" : " not"); + + h->cmd_pool_bits = + kmalloc(((h->nr_cmds + BITS_PER_LONG - + 1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL); + h->cmd_pool = pci_alloc_consistent(h->pdev, + h->nr_cmds * sizeof(*h->cmd_pool), + &(h->cmd_pool_dhandle)); + h->errinfo_pool = pci_alloc_consistent(h->pdev, + h->nr_cmds * sizeof(*h->errinfo_pool), + &(h->errinfo_pool_dhandle)); + if ((h->cmd_pool_bits == NULL) + || (h->cmd_pool == NULL) + || (h->errinfo_pool == NULL)) { + dev_err(&pdev->dev, "out of memory"); + goto clean4; + } + spin_lock_init(&h->lock); + + pci_set_drvdata(pdev, h); + memset(h->cmd_pool_bits, 0, + ((h->nr_cmds + BITS_PER_LONG - + 1) / BITS_PER_LONG) * sizeof(unsigned long)); + + hpsa_scsi_setup(h); + + /* Turn the interrupts on so we can service requests */ + h->access.set_intr_mask(h, HPSA_INTR_ON); + + hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */ + h->busy_initializing = 0; + return 1; + +clean4: + kfree(h->cmd_pool_bits); + if (h->cmd_pool) + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct CommandList), + h->cmd_pool, h->cmd_pool_dhandle); + if (h->errinfo_pool) + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct ErrorInfo), + h->errinfo_pool, + h->errinfo_pool_dhandle); + free_irq(h->intr[SIMPLE_MODE_INT], h); +clean2: +clean1: + h->busy_initializing = 0; + kfree(h); + return -1; +} + +static void hpsa_flush_cache(struct ctlr_info *h) +{ + char *flush_buf; + struct CommandList *c; + + flush_buf = kzalloc(4, GFP_KERNEL); + if (!flush_buf) + return; + + c = cmd_special_alloc(h); + if (!c) { + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + goto out_of_memory; + } + fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0, + RAID_CTLR_LUNID, TYPE_CMD); + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE); + if (c->err_info->CommandStatus != 0) + dev_warn(&h->pdev->dev, + "error flushing cache on controller\n"); + cmd_special_free(h, c); +out_of_memory: + kfree(flush_buf); +} + +static void hpsa_shutdown(struct pci_dev *pdev) +{ + struct ctlr_info *h; + + h = pci_get_drvdata(pdev); + /* Turn board interrupts off and send the flush cache command + * sendcmd will turn off interrupt, and send the flush... + * To write all data in the battery backed cache to disks + */ + hpsa_flush_cache(h); + h->access.set_intr_mask(h, HPSA_INTR_OFF); + free_irq(h->intr[2], h); +#ifdef CONFIG_PCI_MSI + if (h->msix_vector) + pci_disable_msix(h->pdev); + else if (h->msi_vector) + pci_disable_msi(h->pdev); +#endif /* CONFIG_PCI_MSI */ +} + +static void __devexit hpsa_remove_one(struct pci_dev *pdev) +{ + struct ctlr_info *h; + + if (pci_get_drvdata(pdev) == NULL) { + dev_err(&pdev->dev, "unable to remove device \n"); + return; + } + h = pci_get_drvdata(pdev); + mutex_lock(&h->busy_shutting_down); + remove_from_scan_list(h); + hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */ + hpsa_shutdown(pdev); + iounmap(h->vaddr); + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct CommandList), + h->cmd_pool, h->cmd_pool_dhandle); + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct ErrorInfo), + h->errinfo_pool, h->errinfo_pool_dhandle); + kfree(h->cmd_pool_bits); + /* + * Deliberately omit pci_disable_device(): it does something nasty to + * Smart Array controllers that pci_enable_device does not undo + */ + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + mutex_unlock(&h->busy_shutting_down); + kfree(h); +} + +static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev, + __attribute__((unused)) pm_message_t state) +{ + return -ENOSYS; +} + +static int hpsa_resume(__attribute__((unused)) struct pci_dev *pdev) +{ + return -ENOSYS; +} + +static struct pci_driver hpsa_pci_driver = { + .name = "hpsa", + .probe = hpsa_init_one, + .remove = __devexit_p(hpsa_remove_one), + .id_table = hpsa_pci_device_id, /* id_table */ + .shutdown = hpsa_shutdown, + .suspend = hpsa_suspend, + .resume = hpsa_resume, +}; + +/* + * This is it. Register the PCI driver information for the cards we control + * the OS will call our registered routines when it finds one of our cards. + */ +static int __init hpsa_init(void) +{ + int err; + /* Start the scan thread */ + hpsa_scan_thread = kthread_run(hpsa_scan_func, NULL, "hpsa_scan"); + if (IS_ERR(hpsa_scan_thread)) { + err = PTR_ERR(hpsa_scan_thread); + return -ENODEV; + } + err = pci_register_driver(&hpsa_pci_driver); + if (err) + kthread_stop(hpsa_scan_thread); + return err; +} + +static void __exit hpsa_cleanup(void) +{ + pci_unregister_driver(&hpsa_pci_driver); + kthread_stop(hpsa_scan_thread); +} + +module_init(hpsa_init); +module_exit(hpsa_cleanup); diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h new file mode 100644 index 000000000000..6bd1949144b5 --- /dev/null +++ b/drivers/scsi/hpsa.h @@ -0,0 +1,273 @@ +/* + * Disk Array driver for HP Smart Array SAS controllers + * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Questions/Comments/Bugfixes to iss_storagedev@hp.com + * + */ +#ifndef HPSA_H +#define HPSA_H + +#include + +#define IO_OK 0 +#define IO_ERROR 1 + +struct ctlr_info; + +struct access_method { + void (*submit_command)(struct ctlr_info *h, + struct CommandList *c); + void (*set_intr_mask)(struct ctlr_info *h, unsigned long val); + unsigned long (*fifo_full)(struct ctlr_info *h); + unsigned long (*intr_pending)(struct ctlr_info *h); + unsigned long (*command_completed)(struct ctlr_info *h); +}; + +struct hpsa_scsi_dev_t { + int devtype; + int bus, target, lun; /* as presented to the OS */ + unsigned char scsi3addr[8]; /* as presented to the HW */ +#define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0" + unsigned char device_id[16]; /* from inquiry pg. 0x83 */ + unsigned char vendor[8]; /* bytes 8-15 of inquiry data */ + unsigned char model[16]; /* bytes 16-31 of inquiry data */ + unsigned char revision[4]; /* bytes 32-35 of inquiry data */ + unsigned char raid_level; /* from inquiry page 0xC1 */ +}; + +struct ctlr_info { + int ctlr; + char devname[8]; + char *product_name; + char firm_ver[4]; /* Firmware version */ + struct pci_dev *pdev; + __u32 board_id; + void __iomem *vaddr; + unsigned long paddr; + int nr_cmds; /* Number of commands allowed on this controller */ + struct CfgTable __iomem *cfgtable; + int interrupts_enabled; + int major; + int max_commands; + int commands_outstanding; + int max_outstanding; /* Debug */ + int usage_count; /* number of opens all all minor devices */ +# define DOORBELL_INT 0 +# define PERF_MODE_INT 1 +# define SIMPLE_MODE_INT 2 +# define MEMQ_MODE_INT 3 + unsigned int intr[4]; + unsigned int msix_vector; + unsigned int msi_vector; + struct access_method access; + + /* queue and queue Info */ + struct hlist_head reqQ; + struct hlist_head cmpQ; + unsigned int Qdepth; + unsigned int maxQsinceinit; + unsigned int maxSG; + spinlock_t lock; + + /* pointers to command and error info pool */ + struct CommandList *cmd_pool; + dma_addr_t cmd_pool_dhandle; + struct ErrorInfo *errinfo_pool; + dma_addr_t errinfo_pool_dhandle; + unsigned long *cmd_pool_bits; + int nr_allocs; + int nr_frees; + int busy_initializing; + int busy_scanning; + struct mutex busy_shutting_down; + struct list_head scan_list; + struct completion scan_wait; + + struct Scsi_Host *scsi_host; + spinlock_t devlock; /* to protect hba[ctlr]->dev[]; */ + int ndevices; /* number of used elements in .dev[] array. */ +#define HPSA_MAX_SCSI_DEVS_PER_HBA 256 + struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA]; +}; +#define HPSA_ABORT_MSG 0 +#define HPSA_DEVICE_RESET_MSG 1 +#define HPSA_BUS_RESET_MSG 2 +#define HPSA_HOST_RESET_MSG 3 +#define HPSA_MSG_SEND_RETRY_LIMIT 10 +#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS 1000 + +/* Maximum time in seconds driver will wait for command completions + * when polling before giving up. + */ +#define HPSA_MAX_POLL_TIME_SECS (20) + +/* During SCSI error recovery, HPSA_TUR_RETRY_LIMIT defines + * how many times to retry TEST UNIT READY on a device + * while waiting for it to become ready before giving up. + * HPSA_MAX_WAIT_INTERVAL_SECS is the max wait interval + * between sending TURs while waiting for a device + * to become ready. + */ +#define HPSA_TUR_RETRY_LIMIT (20) +#define HPSA_MAX_WAIT_INTERVAL_SECS (30) + +/* HPSA_BOARD_READY_WAIT_SECS is how long to wait for a board + * to become ready, in seconds, before giving up on it. + * HPSA_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait + * between polling the board to see if it is ready, in + * milliseconds. HPSA_BOARD_READY_POLL_INTERVAL and + * HPSA_BOARD_READY_ITERATIONS are derived from those. + */ +#define HPSA_BOARD_READY_WAIT_SECS (120) +#define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100) +#define HPSA_BOARD_READY_POLL_INTERVAL \ + ((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000) +#define HPSA_BOARD_READY_ITERATIONS \ + ((HPSA_BOARD_READY_WAIT_SECS * 1000) / \ + HPSA_BOARD_READY_POLL_INTERVAL_MSECS) +#define HPSA_POST_RESET_PAUSE_MSECS (3000) +#define HPSA_POST_RESET_NOOP_RETRIES (12) + +/* Defining the diffent access_menthods */ +/* + * Memory mapped FIFO interface (SMART 53xx cards) + */ +#define SA5_DOORBELL 0x20 +#define SA5_REQUEST_PORT_OFFSET 0x40 +#define SA5_REPLY_INTR_MASK_OFFSET 0x34 +#define SA5_REPLY_PORT_OFFSET 0x44 +#define SA5_INTR_STATUS 0x30 +#define SA5_SCRATCHPAD_OFFSET 0xB0 + +#define SA5_CTCFG_OFFSET 0xB4 +#define SA5_CTMEM_OFFSET 0xB8 + +#define SA5_INTR_OFF 0x08 +#define SA5B_INTR_OFF 0x04 +#define SA5_INTR_PENDING 0x08 +#define SA5B_INTR_PENDING 0x04 +#define FIFO_EMPTY 0xffffffff +#define HPSA_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */ + +#define HPSA_ERROR_BIT 0x02 +#define HPSA_TAG_CONTAINS_INDEX(tag) ((tag) & 0x04) +#define HPSA_TAG_TO_INDEX(tag) ((tag) >> 3) +#define HPSA_TAG_DISCARD_ERROR_BITS(tag) ((tag) & ~3) + +#define HPSA_INTR_ON 1 +#define HPSA_INTR_OFF 0 +/* + Send the command to the hardware +*/ +static void SA5_submit_command(struct ctlr_info *h, + struct CommandList *c) +{ +#ifdef HPSA_DEBUG + printk(KERN_WARNING "hpsa: Sending %x - down to controller\n", + c->busaddr); +#endif /* HPSA_DEBUG */ + writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); + h->commands_outstanding++; + if (h->commands_outstanding > h->max_outstanding) + h->max_outstanding = h->commands_outstanding; +} + +/* + * This card is the opposite of the other cards. + * 0 turns interrupts on... + * 0x08 turns them off... + */ +static void SA5_intr_mask(struct ctlr_info *h, unsigned long val) +{ + if (val) { /* Turn interrupts on */ + h->interrupts_enabled = 1; + writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } else { /* Turn them off */ + h->interrupts_enabled = 0; + writel(SA5_INTR_OFF, + h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } +} +/* + * Returns true if fifo is full. + * + */ +static unsigned long SA5_fifo_full(struct ctlr_info *h) +{ + if (h->commands_outstanding >= h->max_commands) + return 1; + else + return 0; + +} +/* + * returns value read from hardware. + * returns FIFO_EMPTY if there is nothing to read + */ +static unsigned long SA5_completed(struct ctlr_info *h) +{ + unsigned long register_value + = readl(h->vaddr + SA5_REPLY_PORT_OFFSET); + + if (register_value != FIFO_EMPTY) + h->commands_outstanding--; + +#ifdef HPSA_DEBUG + if (register_value != FIFO_EMPTY) + printk(KERN_INFO "hpsa: Read %lx back from board\n", + register_value); + else + printk(KERN_INFO "hpsa: FIFO Empty read\n"); +#endif + + return register_value; +} +/* + * Returns true if an interrupt is pending.. + */ +static unsigned long SA5_intr_pending(struct ctlr_info *h) +{ + unsigned long register_value = + readl(h->vaddr + SA5_INTR_STATUS); +#ifdef HPSA_DEBUG + printk(KERN_INFO "hpsa: intr_pending %lx\n", register_value); +#endif /* HPSA_DEBUG */ + if (register_value & SA5_INTR_PENDING) + return 1; + return 0 ; +} + + +static struct access_method SA5_access = { + SA5_submit_command, + SA5_intr_mask, + SA5_fifo_full, + SA5_intr_pending, + SA5_completed, +}; + +struct board_type { + __u32 board_id; + char *product_name; + struct access_method *access; +}; + + +/* end of old hpsa_scsi.h file */ + +#endif /* HPSA_H */ + diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h new file mode 100644 index 000000000000..12d71387ed9a --- /dev/null +++ b/drivers/scsi/hpsa_cmd.h @@ -0,0 +1,326 @@ +/* + * Disk Array driver for HP Smart Array SAS controllers + * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Questions/Comments/Bugfixes to iss_storagedev@hp.com + * + */ +#ifndef HPSA_CMD_H +#define HPSA_CMD_H + +/* general boundary defintions */ +#define SENSEINFOBYTES 32 /* may vary between hbas */ +#define MAXSGENTRIES 31 +#define MAXREPLYQS 256 + +/* Command Status value */ +#define CMD_SUCCESS 0x0000 +#define CMD_TARGET_STATUS 0x0001 +#define CMD_DATA_UNDERRUN 0x0002 +#define CMD_DATA_OVERRUN 0x0003 +#define CMD_INVALID 0x0004 +#define CMD_PROTOCOL_ERR 0x0005 +#define CMD_HARDWARE_ERR 0x0006 +#define CMD_CONNECTION_LOST 0x0007 +#define CMD_ABORTED 0x0008 +#define CMD_ABORT_FAILED 0x0009 +#define CMD_UNSOLICITED_ABORT 0x000A +#define CMD_TIMEOUT 0x000B +#define CMD_UNABORTABLE 0x000C + +/* Unit Attentions ASC's as defined for the MSA2012sa */ +#define POWER_OR_RESET 0x29 +#define STATE_CHANGED 0x2a +#define UNIT_ATTENTION_CLEARED 0x2f +#define LUN_FAILED 0x3e +#define REPORT_LUNS_CHANGED 0x3f + +/* Unit Attentions ASCQ's as defined for the MSA2012sa */ + + /* These ASCQ's defined for ASC = POWER_OR_RESET */ +#define POWER_ON_RESET 0x00 +#define POWER_ON_REBOOT 0x01 +#define SCSI_BUS_RESET 0x02 +#define MSA_TARGET_RESET 0x03 +#define CONTROLLER_FAILOVER 0x04 +#define TRANSCEIVER_SE 0x05 +#define TRANSCEIVER_LVD 0x06 + + /* These ASCQ's defined for ASC = STATE_CHANGED */ +#define RESERVATION_PREEMPTED 0x03 +#define ASYM_ACCESS_CHANGED 0x06 +#define LUN_CAPACITY_CHANGED 0x09 + +/* transfer direction */ +#define XFER_NONE 0x00 +#define XFER_WRITE 0x01 +#define XFER_READ 0x02 +#define XFER_RSVD 0x03 + +/* task attribute */ +#define ATTR_UNTAGGED 0x00 +#define ATTR_SIMPLE 0x04 +#define ATTR_HEADOFQUEUE 0x05 +#define ATTR_ORDERED 0x06 +#define ATTR_ACA 0x07 + +/* cdb type */ +#define TYPE_CMD 0x00 +#define TYPE_MSG 0x01 + +/* config space register offsets */ +#define CFG_VENDORID 0x00 +#define CFG_DEVICEID 0x02 +#define CFG_I2OBAR 0x10 +#define CFG_MEM1BAR 0x14 + +/* i2o space register offsets */ +#define I2O_IBDB_SET 0x20 +#define I2O_IBDB_CLEAR 0x70 +#define I2O_INT_STATUS 0x30 +#define I2O_INT_MASK 0x34 +#define I2O_IBPOST_Q 0x40 +#define I2O_OBPOST_Q 0x44 +#define I2O_DMA1_CFG 0x214 + +/* Configuration Table */ +#define CFGTBL_ChangeReq 0x00000001l +#define CFGTBL_AccCmds 0x00000001l + +#define CFGTBL_Trans_Simple 0x00000002l + +#define CFGTBL_BusType_Ultra2 0x00000001l +#define CFGTBL_BusType_Ultra3 0x00000002l +#define CFGTBL_BusType_Fibre1G 0x00000100l +#define CFGTBL_BusType_Fibre2G 0x00000200l +struct vals32 { + __u32 lower; + __u32 upper; +}; + +union u64bit { + struct vals32 val32; + __u64 val; +}; + +/* FIXME this is a per controller value (barf!) */ +#define HPSA_MAX_TARGETS_PER_CTLR 16 +#define HPSA_MAX_LUN 256 +#define HPSA_MAX_PHYS_LUN 1024 + +/* SCSI-3 Commands */ +#pragma pack(1) + +#define HPSA_INQUIRY 0x12 +struct InquiryData { + __u8 data_byte[36]; +}; + +#define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */ +#define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */ +struct ReportLUNdata { + __u8 LUNListLength[4]; + __u32 reserved; + __u8 LUN[HPSA_MAX_LUN][8]; +}; + +struct ReportExtendedLUNdata { + __u8 LUNListLength[4]; + __u8 extended_response_flag; + __u8 reserved[3]; + __u8 LUN[HPSA_MAX_LUN][24]; +}; + +struct SenseSubsystem_info { + __u8 reserved[36]; + __u8 portname[8]; + __u8 reserved1[1108]; +}; + +#define HPSA_READ_CAPACITY 0x25 /* Read Capacity */ +struct ReadCapdata { + __u8 total_size[4]; /* Total size in blocks */ + __u8 block_size[4]; /* Size of blocks in bytes */ +}; + +#if 0 +/* 12 byte commands not implemented in firmware yet. */ +#define HPSA_READ 0xa8 +#define HPSA_WRITE 0xaa +#endif + +#define HPSA_READ 0x28 /* Read(10) */ +#define HPSA_WRITE 0x2a /* Write(10) */ + +/* BMIC commands */ +#define BMIC_READ 0x26 +#define BMIC_WRITE 0x27 +#define BMIC_CACHE_FLUSH 0xc2 +#define HPSA_CACHE_FLUSH 0x01 /* C2 was already being used by HPSA */ + +/* Command List Structure */ +union SCSI3Addr { + struct { + __u8 Dev; + __u8 Bus:6; + __u8 Mode:2; /* b00 */ + } PeripDev; + struct { + __u8 DevLSB; + __u8 DevMSB:6; + __u8 Mode:2; /* b01 */ + } LogDev; + struct { + __u8 Dev:5; + __u8 Bus:3; + __u8 Targ:6; + __u8 Mode:2; /* b10 */ + } LogUnit; +}; + +struct PhysDevAddr { + __u32 TargetId:24; + __u32 Bus:6; + __u32 Mode:2; + /* 2 level target device addr */ + union SCSI3Addr Target[2]; +}; + +struct LogDevAddr { + __u32 VolId:30; + __u32 Mode:2; + __u8 reserved[4]; +}; + +union LUNAddr { + __u8 LunAddrBytes[8]; + union SCSI3Addr SCSI3Lun[4]; + struct PhysDevAddr PhysDev; + struct LogDevAddr LogDev; +}; + +struct CommandListHeader { + __u8 ReplyQueue; + __u8 SGList; + __u16 SGTotal; + struct vals32 Tag; + union LUNAddr LUN; +}; + +struct RequestBlock { + __u8 CDBLen; + struct { + __u8 Type:3; + __u8 Attribute:3; + __u8 Direction:2; + } Type; + __u16 Timeout; + __u8 CDB[16]; +}; + +struct ErrDescriptor { + struct vals32 Addr; + __u32 Len; +}; + +struct SGDescriptor { + struct vals32 Addr; + __u32 Len; + __u32 Ext; +}; + +union MoreErrInfo { + struct { + __u8 Reserved[3]; + __u8 Type; + __u32 ErrorInfo; + } Common_Info; + struct { + __u8 Reserved[2]; + __u8 offense_size; /* size of offending entry */ + __u8 offense_num; /* byte # of offense 0-base */ + __u32 offense_value; + } Invalid_Cmd; +}; +struct ErrorInfo { + __u8 ScsiStatus; + __u8 SenseLen; + __u16 CommandStatus; + __u32 ResidualCnt; + union MoreErrInfo MoreErrInfo; + __u8 SenseInfo[SENSEINFOBYTES]; +}; +/* Command types */ +#define CMD_IOCTL_PEND 0x01 +#define CMD_SCSI 0x03 + +struct ctlr_info; /* defined in hpsa.h */ +/* The size of this structure needs to be divisible by 8 + * od on all architectures, because the controller uses 2 + * lower bits of the address, and the driver uses 1 lower + * bit (3 bits total.) + */ +struct CommandList { + struct CommandListHeader Header; + struct RequestBlock Request; + struct ErrDescriptor ErrDesc; + struct SGDescriptor SG[MAXSGENTRIES]; + /* information associated with the command */ + __u32 busaddr; /* physical addr of this record */ + struct ErrorInfo *err_info; /* pointer to the allocated mem */ + struct ctlr_info *h; + int cmd_type; + long cmdindex; + struct hlist_node list; + struct CommandList *prev; + struct CommandList *next; + struct request *rq; + struct completion *waiting; + int retry_count; + void *scsi_cmd; +}; + +/* Configuration Table Structure */ +struct HostWrite { + __u32 TransportRequest; + __u32 Reserved; + __u32 CoalIntDelay; + __u32 CoalIntCount; +}; + +struct CfgTable { + __u8 Signature[4]; + __u32 SpecValence; + __u32 TransportSupport; + __u32 TransportActive; + struct HostWrite HostWrite; + __u32 CmdsOutMax; + __u32 BusTypes; + __u32 Reserved; + __u8 ServerName[16]; + __u32 HeartBeat; + __u32 SCSI_Prefetch; +}; + +struct hpsa_pci_info { + unsigned char bus; + unsigned char dev_fn; + unsigned short domain; + __u32 board_id; +}; + +#pragma pack() +#endif /* HPSA_CMD_H */ -- GitLab From 9e79e12554d651f586ff2364e69a8e9cd5e9dbcb Mon Sep 17 00:00:00 2001 From: jack wang Date: Mon, 7 Dec 2009 17:22:36 +0800 Subject: [PATCH 044/618] [SCSI] pm8001: Fix for sata io circular lock dependency. This patch fix for sata IO circular lock dependency. When we call task_done for SATA IO, we have got pm8001_ha->lock ,and in sas_ata_task_done, it will get (dev->sata_dev.ap->lock. then cause circular lock dependency .So we should drop pm8001_ha->lock when we call task_done for SATA task. Signed-off-by: Jack Wang Signed-off-by: Lindar Liu Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_hwi.c | 40 ++++++++++++++++++++++++++++---- 1 file changed, 35 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index a3de306b9045..68695b72e1ef 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -1901,7 +1901,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) { struct sas_task *t; struct pm8001_ccb_info *ccb; - unsigned long flags; + unsigned long flags = 0; u32 param; u32 status; u32 tag; @@ -2040,7 +2040,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*in order to force CPU ordering*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2058,7 +2060,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2084,7 +2088,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2149,7 +2155,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2171,7 +2179,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2200,11 +2210,20 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) " resp 0x%x stat 0x%x but aborted by upper layer!\n", t, status, ts->resp, ts->stat)); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); - } else { + } else if (t->uldd_task) { spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto */ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); + } else if (!t->uldd_task) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); } } @@ -2212,7 +2231,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) { struct sas_task *t; - unsigned long flags; + unsigned long flags = 0; struct task_status_struct *ts; struct pm8001_ccb_info *ccb; struct pm8001_device *pm8001_dev; @@ -2292,7 +2311,9 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2401,11 +2422,20 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) " resp 0x%x stat 0x%x but aborted by upper layer!\n", t, event, ts->resp, ts->stat)); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); - } else { + } else if (t->uldd_task) { spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); - mb();/* in order to force CPU ordering */ + mb();/* ditto */ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); + } else if (!t->uldd_task) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); } } -- GitLab From 1cc943ae5003e4612a73119cb6fb637a45c2714d Mon Sep 17 00:00:00 2001 From: jack wang Date: Mon, 7 Dec 2009 17:22:42 +0800 Subject: [PATCH 045/618] [SCSI] pm8001: enhance error handle for IO patch Enhance error handle for IO patch, when the port is down, fast return phy down for task. Signed-off-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_hwi.c | 29 ++++++++++++++++-- drivers/scsi/pm8001/pm8001_init.c | 7 ++++- drivers/scsi/pm8001/pm8001_sas.c | 49 ++++++++++++++++++++++++++++++- drivers/scsi/pm8001/pm8001_sas.h | 4 +++ 4 files changed, 84 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 68695b72e1ef..3a121fbd4fc5 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -2906,13 +2906,17 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) le32_to_cpu(pPayload->lr_evt_status_phyid_portid); u8 link_rate = (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28); + u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F); u8 phy_id = (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4); + u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate); + u8 portstate = (u8)(npip_portstate & 0x0000000F); + struct pm8001_port *port = &pm8001_ha->port[port_id]; struct sas_ha_struct *sas_ha = pm8001_ha->sas; struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; unsigned long flags; u8 deviceType = pPayload->sas_identify.dev_type; - + port->port_state = portstate; PM8001_MSG_DBG(pm8001_ha, pm8001_printk("HW_EVENT_SAS_PHY_UP \n")); @@ -2925,16 +2929,19 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n")); pm8001_chip_phy_ctl_req(pm8001_ha, phy_id, PHY_NOTIFY_ENABLE_SPINUP); + port->port_attached = 1; get_lrate_mode(phy, link_rate); break; case SAS_EDGE_EXPANDER_DEVICE: PM8001_MSG_DBG(pm8001_ha, pm8001_printk("expander device.\n")); + port->port_attached = 1; get_lrate_mode(phy, link_rate); break; case SAS_FANOUT_EXPANDER_DEVICE: PM8001_MSG_DBG(pm8001_ha, pm8001_printk("fanout expander device.\n")); + port->port_attached = 1; get_lrate_mode(phy, link_rate); break; default: @@ -2976,11 +2983,17 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) le32_to_cpu(pPayload->lr_evt_status_phyid_portid); u8 link_rate = (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28); + u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F); u8 phy_id = (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4); + u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate); + u8 portstate = (u8)(npip_portstate & 0x0000000F); + struct pm8001_port *port = &pm8001_ha->port[port_id]; struct sas_ha_struct *sas_ha = pm8001_ha->sas; struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; unsigned long flags; + port->port_state = portstate; + port->port_attached = 1; get_lrate_mode(phy, link_rate); phy->phy_type |= PORT_TYPE_SATA; phy->phy_attached = 1; @@ -3014,7 +3027,13 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb) (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4); u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate); u8 portstate = (u8)(npip_portstate & 0x0000000F); - + struct pm8001_port *port = &pm8001_ha->port[port_id]; + struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; + port->port_state = portstate; + phy->phy_type = 0; + phy->identify.device_type = 0; + phy->phy_attached = 0; + memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE); switch (portstate) { case PORT_VALID: break; @@ -3023,26 +3042,30 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_printk(" PortInvalid portID %d \n", port_id)); PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" Last phy Down and port invalid\n")); + port->port_attached = 0; pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, port_id, phy_id, 0, 0); break; case PORT_IN_RESET: PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(" PortInReset portID %d \n", port_id)); + pm8001_printk(" Port In Reset portID %d \n", port_id)); break; case PORT_NOT_ESTABLISHED: PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n")); + port->port_attached = 0; break; case PORT_LOSTCOMM: PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" phy Down and PORT_LOSTCOMM\n")); PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" Last phy Down and port invalid\n")); + port->port_attached = 0; pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, port_id, phy_id, 0, 0); break; default: + port->port_attached = 0; PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" phy Down and(default) = %x\n", portstate)); diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 42ebe725d5a5..fb6379a4bee4 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -200,8 +200,13 @@ static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha) { int i; spin_lock_init(&pm8001_ha->lock); - for (i = 0; i < pm8001_ha->chip->n_phy; i++) + for (i = 0; i < pm8001_ha->chip->n_phy; i++) { pm8001_phy_init(pm8001_ha, i); + pm8001_ha->port[i].wide_port_phymap = 0; + pm8001_ha->port[i].port_attached = 0; + pm8001_ha->port[i].port_state = 0; + INIT_LIST_HEAD(&pm8001_ha->port[i].list); + } pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL); if (!pm8001_ha->tags) diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 1f767a0e727a..49721c886c26 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -329,6 +329,23 @@ int pm8001_slave_configure(struct scsi_device *sdev) } return 0; } + /* Find the local port id that's attached to this device */ +static int sas_find_local_port_id(struct domain_device *dev) +{ + struct domain_device *pdev = dev->parent; + + /* Directly attached device */ + if (!pdev) + return dev->port->id; + while (pdev) { + struct domain_device *pdev_p = pdev->parent; + if (!pdev_p) + return pdev->port->id; + pdev = pdev->parent; + } + return 0; +} + /** * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware. * @task: the task to be execute. @@ -346,11 +363,12 @@ static int pm8001_task_exec(struct sas_task *task, const int num, struct domain_device *dev = task->dev; struct pm8001_hba_info *pm8001_ha; struct pm8001_device *pm8001_dev; + struct pm8001_port *port = NULL; struct sas_task *t = task; struct pm8001_ccb_info *ccb; u32 tag = 0xdeadbeef, rc, n_elem = 0; u32 n = num; - unsigned long flags = 0; + unsigned long flags = 0, flags_libsas = 0; if (!dev->port) { struct task_status_struct *tsm = &t->task_status; @@ -379,6 +397,35 @@ static int pm8001_task_exec(struct sas_task *task, const int num, rc = SAS_PHY_DOWN; goto out_done; } + port = &pm8001_ha->port[sas_find_local_port_id(dev)]; + if (!port->port_attached) { + if (sas_protocol_ata(t->task_proto)) { + struct task_status_struct *ts = &t->task_status; + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PHY_DOWN; + + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irqrestore(dev->sata_dev.ap->lock, + flags_libsas); + t->task_done(t); + spin_lock_irqsave(dev->sata_dev.ap->lock, + flags_libsas); + spin_lock_irqsave(&pm8001_ha->lock, flags); + if (n > 1) + t = list_entry(t->list.next, + struct sas_task, list); + continue; + } else { + struct task_status_struct *ts = &t->task_status; + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PHY_DOWN; + t->task_done(t); + if (n > 1) + t = list_entry(t->list.next, + struct sas_task, list); + continue; + } + } rc = pm8001_tag_alloc(pm8001_ha, &tag); if (rc) goto err_out; diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 30f2ede55a75..c44a1150d70d 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -164,6 +164,10 @@ struct pm8001_chip_info { struct pm8001_port { struct asd_sas_port sas_port; + u8 port_attached; + u8 wide_port_phymap; + u8 port_state; + struct list_head list; }; struct pm8001_phy { -- GitLab From afc5ca9ddc6c223dbea8a2f8816a88b21a0883b5 Mon Sep 17 00:00:00 2001 From: jack wang Date: Mon, 7 Dec 2009 17:22:47 +0800 Subject: [PATCH 046/618] [SCSI] pm8001: fix endian issues with SAS address Signed-off-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_hwi.c | 7 ++++--- drivers/scsi/pm8001/pm8001_hwi.h | 3 +-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 3a121fbd4fc5..b4426b5b50bc 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -3823,7 +3823,8 @@ static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha, u32 opc = OPC_INB_SSPINIIOSTART; memset(&ssp_cmd, 0, sizeof(ssp_cmd)); memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8); - ssp_cmd.dir_m_tlr = data_dir_flags[task->data_dir] << 8 | 0x0;/*0 for + ssp_cmd.dir_m_tlr = + cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0);/*0 for SAS 1.1 compatible TLR*/ ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len); ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id); @@ -3894,7 +3895,7 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, } } if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) - ncg_tag = cpu_to_le32(hdr_tag); + ncg_tag = hdr_tag; dir = data_dir_flags[task->data_dir] << 8; sata_cmd.tag = cpu_to_le32(tag); sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id); @@ -4039,7 +4040,7 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, ((stp_sspsmp_sata & 0x03) * 0x10000000)); payload.firstburstsize_ITNexustimeout = cpu_to_le32(ITNT | (firstBurstSize * 0x10000)); - memcpy(&payload.sas_addr_hi, pm8001_dev->sas_device->sas_addr, + memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr, SAS_ADDR_SIZE); rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload); return rc; diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h index 96e4daa68b8f..833a5201eda4 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.h +++ b/drivers/scsi/pm8001/pm8001_hwi.h @@ -242,8 +242,7 @@ struct reg_dev_req { __le32 phyid_portid; __le32 dtype_dlr_retry; __le32 firstburstsize_ITNexustimeout; - u32 sas_addr_hi; - u32 sas_addr_low; + u8 sas_addr[SAS_ADDR_SIZE]; __le32 upper_device_id; u32 reserved[8]; } __attribute__((packed, aligned(4))); -- GitLab From 0330dba36127768a2e2df2eabb902b5530102871 Mon Sep 17 00:00:00 2001 From: jack wang Date: Mon, 7 Dec 2009 17:46:22 +0800 Subject: [PATCH 047/618] [SCSI] pm8001: set SSC down-spreading only to get less errors on some 6G device. Signed-off-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_hwi.c | 65 +++++++++++--------------------- 1 file changed, 21 insertions(+), 44 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index b4426b5b50bc..6e1bdd8e680e 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -373,10 +373,7 @@ static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue) static void __devinit mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) { - u32 offset; - u32 value; - u32 i, j; - u32 bit_cnt; + u32 value, offset, i; #define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000 #define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000 @@ -392,55 +389,35 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) */ if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR)) return; - /* set SSC bit of PHY 0 - 3 */ + for (i = 0; i < 4; i++) { offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i; - value = pm8001_cr32(pm8001_ha, 2, offset); - if (SSCbit) { - value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT); - } else { - value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT); - } - bit_cnt = 0; - for (j = 0; j < 31; j++) - if ((value >> j) & 0x00000001) - bit_cnt++; - if (bit_cnt % 2) - value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY); - else - value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY; - - pm8001_cw32(pm8001_ha, 2, offset, value); + pm8001_cw32(pm8001_ha, 2, offset, 0x80001501); } - /* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */ if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR)) return; - - /* set SSC bit of PHY 4 - 7 */ for (i = 4; i < 8; i++) { offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4); - value = pm8001_cr32(pm8001_ha, 2, offset); - if (SSCbit) { - value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT); - } else { - value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT); - } - bit_cnt = 0; - for (j = 0; j < 31; j++) - if ((value >> j) & 0x00000001) - bit_cnt++; - if (bit_cnt % 2) - value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY); - else - value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY; - - pm8001_cw32(pm8001_ha, 2, offset, value); + pm8001_cw32(pm8001_ha, 2, offset, 0x80001501); } + /************************************************************* + Change the SSC upspreading value to 0x0 so that upspreading is disabled. + Device MABC SMOD0 Controls + Address: (via MEMBASE-III): + Using shifted destination address 0x0_0000: with Offset 0xD8 + + 31:28 R/W Reserved Do not change + 27:24 R/W SAS_SMOD_SPRDUP 0000 + 23:20 R/W SAS_SMOD_SPRDDN 0000 + 19:0 R/W Reserved Do not change + Upon power-up this register will read as 0x8990c016, + and I would like you to change the SAS_SMOD_SPRDUP bits to 0b0000 + so that the written value will be 0x8090c016. + This will ensure only down-spreading SSC is enabled on the SPC. + *************************************************************/ + value = pm8001_cr32(pm8001_ha, 2, 0xd8); + pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016); /*set the shifted destination address to 0x0 to avoid error operation */ bar4_shift(pm8001_ha, 0x0); -- GitLab From f01f4e6a1cb343fc75dc580ec9203d9719f78f95 Mon Sep 17 00:00:00 2001 From: jack wang Date: Mon, 7 Dec 2009 17:22:55 +0800 Subject: [PATCH 048/618] [SCSI] pm8001:fix potential NULL pointer dereference Signed-off-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_sas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 49721c886c26..487f78ff750b 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -616,11 +616,11 @@ static int pm8001_dev_found_notify(struct domain_device *dev) spin_lock_irqsave(&pm8001_ha->lock, flags); pm8001_device = pm8001_alloc_dev(pm8001_ha); - pm8001_device->sas_device = dev; if (!pm8001_device) { res = -1; goto found_out; } + pm8001_device->sas_device = dev; dev->lldd_dev = pm8001_device; pm8001_device->dev_type = dev->dev_type; pm8001_device->dcompletion = &completion; -- GitLab From a61b8699c764cccf85ccbf489e1772b2950ba4c6 Mon Sep 17 00:00:00 2001 From: jack wang Date: Mon, 7 Dec 2009 17:22:59 +0800 Subject: [PATCH 049/618] [SCSI] pm8001: bit set pm8001_ha->flags Signed-off-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_sas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 487f78ff750b..c86f92160c7a 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -656,7 +656,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev) wait_for_completion(&completion); if (dev->dev_type == SAS_END_DEV) msleep(50); - pm8001_ha->flags = PM8001F_RUN_TIME ; + pm8001_ha->flags |= PM8001F_RUN_TIME ; return 0; found_out: spin_unlock_irqrestore(&pm8001_ha->lock, flags); -- GitLab From 8257ec80ba5b333dedf3395acf90055075aeba94 Mon Sep 17 00:00:00 2001 From: jack wang Date: Mon, 7 Dec 2009 17:23:05 +0800 Subject: [PATCH 050/618] [SCSI] pm8001: do not reset local sata as it will not be found if reset Signed-off-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_sas.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index c86f92160c7a..e3d4f385dcce 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -944,6 +944,8 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev) if (dev_is_sata(dev)) { DECLARE_COMPLETION_ONSTACK(completion_setstate); + if (scsi_is_sas_phy_local(phy)) + return 0; rc = sas_phy_reset(phy, 1); msleep(2000); rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , -- GitLab From 7c8356d969e203a8f2f740a9a80d4944eb8cf1d1 Mon Sep 17 00:00:00 2001 From: jack wang Date: Mon, 7 Dec 2009 17:23:08 +0800 Subject: [PATCH 051/618] [SCSI] pm8001: enable read HBA SAS address from VPD Signed-off-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_ctl.h | 10 ---------- drivers/scsi/pm8001/pm8001_init.c | 12 ++++++++---- drivers/scsi/pm8001/pm8001_sas.h | 24 ++++++++++++++++++------ 3 files changed, 26 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_ctl.h b/drivers/scsi/pm8001/pm8001_ctl.h index 22644de26399..63ad4aa0c422 100644 --- a/drivers/scsi/pm8001/pm8001_ctl.h +++ b/drivers/scsi/pm8001/pm8001_ctl.h @@ -45,16 +45,6 @@ #define HEADER_LEN 28 #define SIZE_OFFSET 16 -struct pm8001_ioctl_payload { - u32 signature; - u16 major_function; - u16 minor_function; - u16 length; - u16 status; - u16 offset; - u16 id; - u8 func_specific[1]; -}; #define FLASH_OK 0x000000 #define FAIL_OPEN_BIOS_FILE 0x000100 diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index fb6379a4bee4..c2f1032496cb 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -516,19 +516,23 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) u8 i; #ifdef PM8001_READ_VPD DECLARE_COMPLETION_ONSTACK(completion); + struct pm8001_ioctl_payload payload; pm8001_ha->nvmd_completion = &completion; - PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, 0, 0); + payload.minor_function = 0; + payload.length = 128; + payload.func_specific = kzalloc(128, GFP_KERNEL); + PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload); wait_for_completion(&completion); for (i = 0; i < pm8001_ha->chip->n_phy; i++) { memcpy(&pm8001_ha->phy[i].dev_sas_addr, pm8001_ha->sas_addr, SAS_ADDR_SIZE); PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("phy %d sas_addr = %x \n", i, - (u64)pm8001_ha->phy[i].dev_sas_addr)); + pm8001_printk("phy %d sas_addr = %016llx \n", i, + pm8001_ha->phy[i].dev_sas_addr)); } #else for (i = 0; i < pm8001_ha->chip->n_phy; i++) { - pm8001_ha->phy[i].dev_sas_addr = 0x500e004010000004ULL; + pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL; pm8001_ha->phy[i].dev_sas_addr = cpu_to_be64((u64) (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr)); diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index c44a1150d70d..599601e9fd08 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -100,6 +100,7 @@ do { \ #define PM8001_USE_TASKLET #define PM8001_USE_MSIX +#define PM8001_READ_VPD #define DEV_IS_EXPANDER(type) ((type == EDGE_DEV) || (type == FANOUT_DEV)) @@ -111,7 +112,22 @@ extern const struct pm8001_dispatch pm8001_8001_dispatch; struct pm8001_hba_info; struct pm8001_ccb_info; struct pm8001_device; -struct pm8001_tmf_task; +/* define task management IU */ +struct pm8001_tmf_task { + u8 tmf; + u32 tag_of_task_to_be_managed; +}; +struct pm8001_ioctl_payload { + u32 signature; + u16 major_function; + u16 minor_function; + u16 length; + u16 status; + u16 offset; + u16 id; + u8 *func_specific; +}; + struct pm8001_dispatch { char *name; int (*chip_init)(struct pm8001_hba_info *pm8001_ha); @@ -390,11 +406,7 @@ struct pm8001_fw_image_header { __be32 startup_entry; } __attribute__((packed, aligned(4))); -/* define task management IU */ -struct pm8001_tmf_task { - u8 tmf; - u32 tag_of_task_to_be_managed; -}; + /** * FW Flash Update status values */ -- GitLab From 83e7332941e3e2621502aadb0e5c8a3b11fd1197 Mon Sep 17 00:00:00 2001 From: jack wang Date: Mon, 7 Dec 2009 17:23:11 +0800 Subject: [PATCH 052/618] [SCSI] pm8001: misc code cleanup Add more data to printk's, add some spaces around arithmetic ops and improve comments. Signed-off-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_hwi.c | 8 ++++++-- drivers/scsi/pm8001/pm8001_sas.c | 2 +- drivers/scsi/pm8001/pm8001_sas.h | 4 ++-- 3 files changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 6e1bdd8e680e..9b44c6f1b10e 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -2895,7 +2895,8 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) u8 deviceType = pPayload->sas_identify.dev_type; port->port_state = portstate; PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_SAS_PHY_UP \n")); + pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n", + port_id, phy_id)); switch (deviceType) { case SAS_PHY_UNUSED: @@ -2969,6 +2970,9 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) struct sas_ha_struct *sas_ha = pm8001_ha->sas; struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; unsigned long flags; + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d," + " phy id = %d\n", port_id, phy_id)); port->port_state = portstate; port->port_attached = 1; get_lrate_mode(phy, link_rate); @@ -4058,7 +4062,7 @@ static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha, struct inbound_queue_table *circularQ; int ret; u32 opc = OPC_INB_LOCAL_PHY_CONTROL; - memset((u8 *)&payload, 0, sizeof(payload)); + memset(&payload, 0, sizeof(payload)); circularQ = &pm8001_ha->inbnd_q_tbl[0]; payload.tag = 1; payload.phyop_phyid = diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index e3d4f385dcce..7f9c83a76390 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -819,7 +819,7 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha, task->task_done = pm8001_task_done; task->timer.data = (unsigned long)task; task->timer.function = pm8001_tmf_timedout; - task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ; + task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ; add_timer(&task->timer); res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 599601e9fd08..8e38ca8cd101 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -59,11 +59,11 @@ #define DRV_NAME "pm8001" #define DRV_VERSION "0.1.36" -#define PM8001_FAIL_LOGGING 0x01 /* libsas EH function logging */ +#define PM8001_FAIL_LOGGING 0x01 /* Error message logging */ #define PM8001_INIT_LOGGING 0x02 /* driver init logging */ #define PM8001_DISC_LOGGING 0x04 /* discovery layer logging */ #define PM8001_IO_LOGGING 0x08 /* I/O path logging */ -#define PM8001_EH_LOGGING 0x10 /* Error message logging */ +#define PM8001_EH_LOGGING 0x10 /* libsas EH function logging*/ #define PM8001_IOCTL_LOGGING 0x20 /* IOCTL message logging */ #define PM8001_MSG_LOGGING 0x40 /* misc message logging */ #define pm8001_printk(format, arg...) printk(KERN_INFO "%s %d:" format,\ -- GitLab From b22b97c15eed893a6768aad2f596706c56bf194e Mon Sep 17 00:00:00 2001 From: Mark Ware Date: Thu, 10 Dec 2009 22:14:34 +1100 Subject: [PATCH 053/618] powerpc/cpm2_pic: Allow correct flow_types for port C interrupts Port C interrupts can be either falling edge, or either edge. Other external interrupts are either falling edge or active low. Tested on a custom 8280 based board. Signed-off-by: Mark Ware Acked-by: Anton Vorontsov Acked-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/cpm2_pic.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index 971483f0dfac..1709ac5aac7c 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -143,13 +143,23 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type) struct irq_desc *desc = irq_to_desc(virq); unsigned int vold, vnew, edibit; - if (flow_type == IRQ_TYPE_NONE) - flow_type = IRQ_TYPE_LEVEL_LOW; - - if (flow_type & IRQ_TYPE_EDGE_RISING) { - printk(KERN_ERR "CPM2 PIC: sense type 0x%x not supported\n", - flow_type); - return -EINVAL; + /* Port C interrupts are either IRQ_TYPE_EDGE_FALLING or + * IRQ_TYPE_EDGE_BOTH (default). All others are IRQ_TYPE_EDGE_FALLING + * or IRQ_TYPE_LEVEL_LOW (default) + */ + if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0) { + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_EDGE_BOTH; + + if (flow_type != IRQ_TYPE_EDGE_BOTH && + flow_type != IRQ_TYPE_EDGE_FALLING) + goto err_sense; + } else { + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) + goto err_sense; } desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); @@ -181,6 +191,10 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type) if (vold != vnew) out_be32(&cpm2_intctl->ic_siexr, vnew); return 0; + +err_sense: + pr_err("CPM2 PIC: sense type 0x%x not supported\n", flow_type); + return -EINVAL; } static struct irq_chip cpm2_pic = { -- GitLab From 14d8c9f3c09e7fd7b9af80904289fe204f5b93c6 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 10 Dec 2009 00:53:17 +0000 Subject: [PATCH 054/618] signal: Fix racy access to __task_cred in kill_pid_info_as_uid() kill_pid_info_as_uid() accesses __task_cred() without being in a RCU read side critical section. tasklist_lock is not protecting that when CONFIG_TREE_PREEMPT_RCU=y. Convert the whole tasklist_lock section to rcu and use lock_task_sighand to prevent the exit race. Signed-off-by: Thomas Gleixner LKML-Reference: <20091210004703.232302055@linutronix.de> Acked-by: Oleg Nesterov --- kernel/signal.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/kernel/signal.c b/kernel/signal.c index 6b982f2cf524..73316568a69c 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -1175,11 +1175,12 @@ int kill_pid_info_as_uid(int sig, struct siginfo *info, struct pid *pid, int ret = -EINVAL; struct task_struct *p; const struct cred *pcred; + unsigned long flags; if (!valid_signal(sig)) return ret; - read_lock(&tasklist_lock); + rcu_read_lock(); p = pid_task(pid, PIDTYPE_PID); if (!p) { ret = -ESRCH; @@ -1196,14 +1197,16 @@ int kill_pid_info_as_uid(int sig, struct siginfo *info, struct pid *pid, ret = security_task_kill(p, info, sig, secid); if (ret) goto out_unlock; - if (sig && p->sighand) { - unsigned long flags; - spin_lock_irqsave(&p->sighand->siglock, flags); - ret = __send_signal(sig, info, p, 1, 0); - spin_unlock_irqrestore(&p->sighand->siglock, flags); + + if (sig) { + if (lock_task_sighand(p, &flags)) { + ret = __send_signal(sig, info, p, 1, 0); + unlock_task_sighand(p, &flags); + } else + ret = -ESRCH; } out_unlock: - read_unlock(&tasklist_lock); + rcu_read_unlock(); return ret; } EXPORT_SYMBOL_GPL(kill_pid_info_as_uid); -- GitLab From 7cf7db8df0b78076eafa4ead47559344ca7b7a43 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 10 Dec 2009 00:53:21 +0000 Subject: [PATCH 055/618] signals: Fix more rcu assumptions 1) Remove the misleading comment in __sigqueue_alloc() which claims that holding a spinlock is equivalent to rcu_read_lock(). 2) Add a rcu_read_lock/unlock around the __task_cred() access in __sigqueue_alloc() This needs to be revisited to remove the remaining users of read_lock(&tasklist_lock) but that's outside the scope of this patch. Signed-off-by: Thomas Gleixner LKML-Reference: <20091210004703.269843657@linutronix.de> --- kernel/signal.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/signal.c b/kernel/signal.c index 73316568a69c..f67545f9394c 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -218,13 +218,13 @@ __sigqueue_alloc(int sig, struct task_struct *t, gfp_t flags, int override_rlimi struct user_struct *user; /* - * We won't get problems with the target's UID changing under us - * because changing it requires RCU be used, and if t != current, the - * caller must be holding the RCU readlock (by way of a spinlock) and - * we use RCU protection here + * Protect access to @t credentials. This can go away when all + * callers hold rcu read lock. */ + rcu_read_lock(); user = get_uid(__task_cred(t)->user); atomic_inc(&user->sigpending); + rcu_read_unlock(); if (override_rlimit || atomic_read(&user->sigpending) <= -- GitLab From d4581a239a40319205762b76c01eb6363f277efa Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 10 Dec 2009 00:52:51 +0000 Subject: [PATCH 056/618] sys: Fix missing rcu protection for __task_cred() access commit c69e8d9 (CRED: Use RCU to access another task's creds and to release a task's own creds) added non rcu_read_lock() protected access to task creds of the target task in set_prio_one(). The comment above the function says: * - the caller must hold the RCU read lock The calling code in sys_setpriority does read_lock(&tasklist_lock) but not rcu_read_lock(). This works only when CONFIG_TREE_PREEMPT_RCU=n. With CONFIG_TREE_PREEMPT_RCU=y the rcu_callbacks can run in the tick interrupt when they see no read side critical section. There is another instance of __task_cred() in sys_setpriority() itself which is equally unprotected. Wrap the whole code section into a rcu read side critical section to fix this quick and dirty. Will be revisited in course of the read_lock(&tasklist_lock) -> rcu crusade. Oleg noted further: This also fixes another bug here. find_task_by_vpid() is not safe without rcu_read_lock(). I do not mean it is not safe to use the result, just find_pid_ns() by itself is not safe. Usually tasklist gives enough protection, but if copy_process() fails it calls free_pid() lockless and does call_rcu(delayed_put_pid(). This means, without rcu lock find_pid_ns() can't scan the hash table safely. Signed-off-by: Thomas Gleixner LKML-Reference: <20091210004703.029784964@linutronix.de> Acked-by: Paul E. McKenney --- kernel/sys.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/sys.c b/kernel/sys.c index 9968c5fb55b9..bc1dc61c31ed 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -163,6 +163,7 @@ SYSCALL_DEFINE3(setpriority, int, which, int, who, int, niceval) if (niceval > 19) niceval = 19; + rcu_read_lock(); read_lock(&tasklist_lock); switch (which) { case PRIO_PROCESS: @@ -200,6 +201,7 @@ SYSCALL_DEFINE3(setpriority, int, which, int, who, int, niceval) } out_unlock: read_unlock(&tasklist_lock); + rcu_read_unlock(); out: return error; } -- GitLab From f25c525c1412675d2b23d5d88660fb5c9f3a5341 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 10 Dec 2009 21:00:53 +0300 Subject: [PATCH 057/618] powerpc/83xx/suspend: Clear deep_sleeping after devices resume Currently 83xx PMC driver clears deep_sleeping variable very early, before devices are resumed. This makes fsl_deep_sleep() unusable in drivers' resume() callback. Sure, drivers can store fsl_deep_sleep() value on suspend and use the stored value on resume. But a better solution is to postpone clearing the deep_sleeping variable, i.e. move it into finish() callback. Signed-off-by: Anton Vorontsov Acked-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/suspend.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c index d306f07b9aa1..b0c261936f3d 100644 --- a/arch/powerpc/platforms/83xx/suspend.c +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -194,7 +194,7 @@ static int mpc83xx_suspend_enter(suspend_state_t state) return ret; } -static void mpc83xx_suspend_finish(void) +static void mpc83xx_suspend_end(void) { deep_sleeping = 0; } @@ -278,7 +278,7 @@ static struct platform_suspend_ops mpc83xx_suspend_ops = { .valid = mpc83xx_suspend_valid, .begin = mpc83xx_suspend_begin, .enter = mpc83xx_suspend_enter, - .finish = mpc83xx_suspend_finish, + .end = mpc83xx_suspend_end, }; static int pmc_probe(struct of_device *ofdev, -- GitLab From 87faaabb09d0802d54ff863a16ca821d7c669cb6 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 10 Dec 2009 21:00:56 +0300 Subject: [PATCH 058/618] powerpc/83xx/suspend: Save and restore SICRL, SICRH and SCCR We need to save SICRL, SICRH and SCCR registers on suspend, and restore them on resume. Otherwise, we lose IO and clocks setup on MPC8315E-RDB boards when ULPI USB PHY is used (non-POR setup). Signed-off-by: Anton Vorontsov Acked-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/suspend.c | 48 +++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c index b0c261936f3d..43805348b81e 100644 --- a/arch/powerpc/platforms/83xx/suspend.c +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -32,6 +32,7 @@ #define PMCCR1_NEXT_STATE 0x0C /* Next state for power management */ #define PMCCR1_NEXT_STATE_SHIFT 2 #define PMCCR1_CURR_STATE 0x03 /* Current state for power management*/ +#define IMMR_SYSCR_OFFSET 0x100 #define IMMR_RCW_OFFSET 0x900 #define RCW_PCI_HOST 0x80000000 @@ -78,6 +79,22 @@ struct mpc83xx_clock { u32 sccr; }; +struct mpc83xx_syscr { + __be32 sgprl; + __be32 sgprh; + __be32 spridr; + __be32 :32; + __be32 spcr; + __be32 sicrl; + __be32 sicrh; +}; + +struct mpc83xx_saved { + u32 sicrl; + u32 sicrh; + u32 sccr; +}; + struct pmc_type { int has_deep_sleep; }; @@ -87,6 +104,8 @@ static int has_deep_sleep, deep_sleeping; static int pmc_irq; static struct mpc83xx_pmc __iomem *pmc_regs; static struct mpc83xx_clock __iomem *clock_regs; +static struct mpc83xx_syscr __iomem *syscr_regs; +static struct mpc83xx_saved saved_regs; static int is_pci_agent, wake_from_pci; static phys_addr_t immrbase; static int pci_pm_state; @@ -137,6 +156,20 @@ static irqreturn_t pmc_irq_handler(int irq, void *dev_id) return ret; } +static void mpc83xx_suspend_restore_regs(void) +{ + out_be32(&syscr_regs->sicrl, saved_regs.sicrl); + out_be32(&syscr_regs->sicrh, saved_regs.sicrh); + out_be32(&clock_regs->sccr, saved_regs.sccr); +} + +static void mpc83xx_suspend_save_regs(void) +{ + saved_regs.sicrl = in_be32(&syscr_regs->sicrl); + saved_regs.sicrh = in_be32(&syscr_regs->sicrh); + saved_regs.sccr = in_be32(&clock_regs->sccr); +} + static int mpc83xx_suspend_enter(suspend_state_t state) { int ret = -EAGAIN; @@ -166,6 +199,8 @@ static int mpc83xx_suspend_enter(suspend_state_t state) */ if (deep_sleeping) { + mpc83xx_suspend_save_regs(); + out_be32(&pmc_regs->mask, PMCER_ALL); out_be32(&pmc_regs->config1, @@ -179,6 +214,8 @@ static int mpc83xx_suspend_enter(suspend_state_t state) in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF); out_be32(&pmc_regs->mask, PMCER_PMCI); + + mpc83xx_suspend_restore_regs(); } else { out_be32(&pmc_regs->mask, PMCER_PMCI); @@ -333,12 +370,23 @@ static int pmc_probe(struct of_device *ofdev, goto out_pmc; } + if (has_deep_sleep) { + syscr_regs = ioremap(immrbase + IMMR_SYSCR_OFFSET, + sizeof(*syscr_regs)); + if (!syscr_regs) { + ret = -ENOMEM; + goto out_syscr; + } + } + if (is_pci_agent) mpc83xx_set_agent(); suspend_set_ops(&mpc83xx_suspend_ops); return 0; +out_syscr: + iounmap(clock_regs); out_pmc: iounmap(pmc_regs); out: -- GitLab From 1cad2c874162d84bf7b2d31344a08b9cb724d138 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 10 Dec 2009 21:01:03 +0300 Subject: [PATCH 059/618] powerpc/83xx: Add power management support for MPC8315E-RDB boards - Add nodes for PMC and GTM controllers. GTM4 can be used as a wakeup source; - Add fsl,magic-packet properties to eTSEC nodes, i.e. wake-on-lan support. Unlike MPC8313 processors, MPC8315 can resume from deep sleep upon magic packet reception. Signed-off-by: Anton Vorontsov Acked-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8315erdb.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 32e10f588c1d..8a3a4f3ef831 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -204,6 +204,7 @@ interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = < &phy0 >; + fsl,magic-packet; mdio@520 { #address-cells = <1>; @@ -246,6 +247,7 @@ interrupt-parent = <&ipic>; tbi-handle = <&tbi1>; phy-handle = < &phy1 >; + fsl,magic-packet; mdio@520 { #address-cells = <1>; @@ -309,6 +311,22 @@ interrupt-parent = <&ipic>; }; + gtm1: timer@500 { + compatible = "fsl,mpc8315-gtm", "fsl,gtm"; + reg = <0x500 0x100>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + + timer@600 { + compatible = "fsl,mpc8315-gtm", "fsl,gtm"; + reg = <0x600 0x100>; + interrupts = <91 8 79 8 85 8 73 8>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + /* IPIC * interrupts cell = * sense values match linux IORESOURCE_IRQ_* defines: @@ -337,6 +355,15 @@ 0x59 0x8>; interrupt-parent = < &ipic >; }; + + pmc: power@b00 { + compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc", + "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 8>; + interrupt-parent = <&ipic>; + fsl,mpc8313-wakeup-timer = <>m1>; + }; }; pci0: pci@e0008500 { -- GitLab From 78331aded913d76c7ff996a1a0747d54b057460b Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Tue, 1 Dec 2009 21:48:13 +0100 Subject: [PATCH 060/618] powerpc/gpio: support gpio_to_irq() gpiolib returns -ENXIO if struct gpio_chip::to_irq isn't set, so it's safe to always call. Signed-off-by: Peter Korsgaard Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/gpio.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/powerpc/include/asm/gpio.h b/arch/powerpc/include/asm/gpio.h index ea04632399d8..38762edb5e58 100644 --- a/arch/powerpc/include/asm/gpio.h +++ b/arch/powerpc/include/asm/gpio.h @@ -38,12 +38,9 @@ static inline int gpio_cansleep(unsigned int gpio) return __gpio_cansleep(gpio); } -/* - * Not implemented, yet. - */ static inline int gpio_to_irq(unsigned int gpio) { - return -ENOSYS; + return __gpio_to_irq(gpio); } static inline int irq_to_gpio(unsigned int irq) -- GitLab From c1a676dfa2fa25fb9ec77c92ebe3ff580648b6ac Mon Sep 17 00:00:00 2001 From: Felix Radensky Date: Wed, 12 Aug 2009 08:57:39 +0300 Subject: [PATCH 061/618] powerpc/85xx: Workaround MPC8572/MPC8536 GPIO 1 errata. On MPC8572 and MPC8536 the status of GPIO pins configured as output cannot be determined by reading GPDAT register. Workaround by reading the status of input pins from GPDAT and the status of output pins from a shadow register. Signed-off-by: Felix Radensky Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/mpc8xxx_gpio.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c index 103eace36194..ee1c0e1cf4a7 100644 --- a/arch/powerpc/sysdev/mpc8xxx_gpio.c +++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c @@ -54,6 +54,22 @@ static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm) mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT); } +/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs + * defined as output cannot be determined by reading GPDAT register, + * so we use shadow data register instead. The status of input pins + * is determined by reading GPDAT register. + */ +static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + u32 val; + struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); + struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); + + val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR); + + return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio); +} + static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio) { struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); @@ -136,7 +152,10 @@ static void __init mpc8xxx_add_controller(struct device_node *np) gc->ngpio = MPC8XXX_GPIO_PINS; gc->direction_input = mpc8xxx_gpio_dir_in; gc->direction_output = mpc8xxx_gpio_dir_out; - gc->get = mpc8xxx_gpio_get; + if (of_device_is_compatible(np, "fsl,mpc8572-gpio")) + gc->get = mpc8572_gpio_get; + else + gc->get = mpc8xxx_gpio_get; gc->set = mpc8xxx_gpio_set; ret = of_mm_gpiochip_add(np, mm_gc); -- GitLab From 1cb9f9b086f818eb9543ed759382de7b95c67f87 Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Wed, 9 Dec 2009 01:43:49 +0100 Subject: [PATCH 062/618] [ARM] Kirkwood: Add LaCie Network Space v2 support Signed-off-by: Simon Guinot Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/Kconfig | 6 + arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/netspace_v2-setup.c | 325 +++++++++++++++++++++ 3 files changed, 332 insertions(+) create mode 100644 arch/arm/mach-kirkwood/netspace_v2-setup.c diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 8bf09ae5b347..f6c6196a51fa 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -52,6 +52,12 @@ config MACH_OPENRD_BASE Say 'Y' here if you want your kernel to support the Marvell OpenRD Base Board. +config MACH_NETSPACE_V2 + bool "LaCie Network Space v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie Network Space v2 NAS. + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 9f2f67b2b63d..d4d7f53b0fb9 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -8,5 +8,6 @@ obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o +obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c new file mode 100644 index 000000000000..9a064065bebe --- /dev/null +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -0,0 +1,325 @@ +/* + * arch/arm/mach-kirkwood/netspace_v2-setup.c + * + * LaCie Network Space v2 board setup + * + * Copyright (C) 2009 Simon Guinot + * Copyright (C) 2009 Benoît Canet + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) + ****************************************************************************/ + +static struct mtd_partition netspace_v2_flash_parts[] = { + { + .name = "u-boot", + .size = MTDPART_SIZ_FULL, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, +}; + +static const struct flash_platform_data netspace_v2_flash = { + .type = "mx25l4005a", + .name = "spi_flash", + .parts = netspace_v2_flash_parts, + .nr_parts = ARRAY_SIZE(netspace_v2_flash_parts), +}; + +static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &netspace_v2_flash, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data netspace_v2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * I2C devices + ****************************************************************************/ + +static struct at24_platform_data at24c04 = { + .byte_len = SZ_4K / 8, + .page_size = 16, +}; + +/* + * i2c addr | chip | description + * 0x50 | HT24LC04 | eeprom (512B) + */ + +static struct i2c_board_info __initdata netspace_v2_i2c_info[] = { + { + I2C_BOARD_INFO("24c04", 0x50), + .platform_data = &at24c04, + } +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ + +static struct mv_sata_platform_data netspace_v2_sata_data = { + .n_ports = 2, +}; + +#define NETSPACE_V2_GPIO_SATA0_POWER 16 +#define NETSPACE_V2_GPIO_SATA1_POWER 17 + +static void __init netspace_v2_sata_power_init(void) +{ + int err; + + err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power"); + if (err == 0) { + err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1); + if (err) + gpio_free(NETSPACE_V2_GPIO_SATA0_POWER); + } + if (err) + pr_err("netspace_v2: failed to setup SATA0 power\n"); +} + +/***************************************************************************** + * GPIO keys + ****************************************************************************/ + +#define NETSPACE_V2_PUSH_BUTTON 32 + +static struct gpio_keys_button netspace_v2_buttons[] = { + [0] = { + .code = KEY_POWER, + .gpio = NETSPACE_V2_PUSH_BUTTON, + .desc = "Power push button", + .active_low = 0, + }, +}; + +static struct gpio_keys_platform_data netspace_v2_button_data = { + .buttons = netspace_v2_buttons, + .nbuttons = ARRAY_SIZE(netspace_v2_buttons), +}; + +static struct platform_device netspace_v2_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &netspace_v2_button_data, + }, +}; + +/***************************************************************************** + * GPIO LEDs + ****************************************************************************/ + +/* + * The blue front LED is wired to a CPLD and can blink in relation with the + * SATA activity. + * + * The following array detail the different LED registers and the combination + * of their possible values: + * + * cmd_led | slow_led | /SATA active | LED state + * | | | + * 1 | 0 | x | off + * - | 1 | x | on + * 0 | 0 | 1 | on + * 0 | 0 | 0 | blink (rate 300ms) + */ + +#define NETSPACE_V2_GPIO_RED_LED 12 +#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29 +#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30 + + +static struct gpio_led netspace_v2_gpio_led_pins[] = { + { + .name = "ns_v2:red:fail", + .gpio = NETSPACE_V2_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data netspace_v2_gpio_leds_data = { + .num_leds = ARRAY_SIZE(netspace_v2_gpio_led_pins), + .leds = netspace_v2_gpio_led_pins, +}; + +static struct platform_device netspace_v2_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &netspace_v2_gpio_leds_data, + }, +}; + +static void __init netspace_v2_gpio_leds_init(void) +{ + platform_device_register(&netspace_v2_gpio_leds); + + /* + * Configure the front blue LED to blink in relation with the SATA + * activity. + */ + if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, + "SATA blue LED slow") != 0) + return; + if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0) + goto err_free_1; + if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD, + "SATA blue LED command") != 0) + goto err_free_1; + if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0) + goto err_free_2; + + return; + +err_free_2: + gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD); +err_free_1: + gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW); + pr_err("netspace_v2: failed to configure SATA blue LED\n"); +} + +/***************************************************************************** + * Timer + ****************************************************************************/ + +static void netspace_v2_timer_init(void) +{ + kirkwood_tclk = 166666667; + orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); +} + +struct sys_timer netspace_v2_timer = { + .init = netspace_v2_timer_init, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static unsigned int netspace_v2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP16_GPIO, /* SATA 0 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP24_GPIO, /* USB mode select */ + MPP25_GPIO, /* Fan rotation fail */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP31_GPIO, /* Board power off */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + 0 +}; + +#define NETSPACE_V2_GPIO_POWER_OFF 31 + +static void netspace_v2_power_off(void) +{ + gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1); +} + +static void __init netspace_v2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(netspace_v2_mpp_config); + + netspace_v2_sata_power_init(); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&netspace_v2_ge00_data); + kirkwood_sata_init(&netspace_v2_sata_data); + kirkwood_uart0_init(); + spi_register_board_info(netspace_v2_spi_slave_info, + ARRAY_SIZE(netspace_v2_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_i2c_init(); + i2c_register_board_info(0, netspace_v2_i2c_info, + ARRAY_SIZE(netspace_v2_i2c_info)); + + netspace_v2_gpio_leds_init(); + platform_device_register(&netspace_v2_gpio_buttons); + + if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = netspace_v2_power_off; + else + pr_err("netspace_v2: failed to configure power-off GPIO\n"); +} + +MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = netspace_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &netspace_v2_timer, +MACHINE_END -- GitLab From bb6eddf7676e1c1f3e637aa93c5224488d99036f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 10 Dec 2009 15:35:10 +0100 Subject: [PATCH 063/618] clockevents: Prevent clockevent_devices list corruption on cpu hotplug Xiaotian Feng triggered a list corruption in the clock events list on CPU hotplug and debugged the root cause. If a CPU registers more than one per cpu clock event device, then only the active clock event device is removed on CPU_DEAD. The unused devices are kept in the clock events device list. On CPU up the clock event devices are registered again, which means that we list_add an already enqueued list_head. That results in list corruption. Resolve this by removing all devices which are associated to the dead CPU on CPU_DEAD. Reported-by: Xiaotian Feng Signed-off-by: Thomas Gleixner Tested-by: Xiaotian Feng Cc: stable@kernel.org --- kernel/time/clockevents.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 20a8920029ee..91db2e33d86a 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -238,8 +238,9 @@ void clockevents_exchange_device(struct clock_event_device *old, */ void clockevents_notify(unsigned long reason, void *arg) { - struct list_head *node, *tmp; + struct clock_event_device *dev, *tmp; unsigned long flags; + int cpu; spin_lock_irqsave(&clockevents_lock, flags); clockevents_do_notify(reason, arg); @@ -250,8 +251,19 @@ void clockevents_notify(unsigned long reason, void *arg) * Unregister the clock event devices which were * released from the users in the notify chain. */ - list_for_each_safe(node, tmp, &clockevents_released) - list_del(node); + list_for_each_entry_safe(dev, tmp, &clockevents_released, list) + list_del(&dev->list); + /* + * Now check whether the CPU has left unused per cpu devices + */ + cpu = *((int *)arg); + list_for_each_entry_safe(dev, tmp, &clockevent_devices, list) { + if (cpumask_test_cpu(cpu, dev->cpumask) && + cpumask_weight(dev->cpumask) == 1) { + BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED); + list_del(&dev->list); + } + } break; default: break; -- GitLab From 070bae1fb03bbf6a19a18722464a984eb3ddf55e Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 11 Dec 2009 03:39:53 +0000 Subject: [PATCH 064/618] powerpc/44x: Extend Katmai dts for ADMA and RAID56 support Add nodes for PPC440SPe DMA, I2O, XOR engines and Memory Queue module which are used in the updated PPC440SPe ADMA driver. Also extend plb ranges property to specify address ranges for DMA0/1 and I2O engines. Signed-off-by: Yuri Tikhonov Signed-off-by: Anatolij Gustschin Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/katmai.dts | 52 +++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index 51eb6ed5da2d..8f345de960cd 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -108,12 +108,19 @@ dcr-reg = <0x00c 0x002>; }; + MQ0: mq { + compatible = "ibm,mq-440spe"; + dcr-reg = <0x040 0x020>; + }; + plb { compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; #address-cells = <2>; #size-cells = <1>; /* addr-child addr-parent size */ - ranges = <0x4 0xe0000000 0x4 0xe0000000 0x20000000 + ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000 + 0x4 0x00200000 0x4 0x00200000 0x00000400 + 0x4 0xe0000000 0x4 0xe0000000 0x20000000 0xc 0x00000000 0xc 0x00000000 0x20000000 0xd 0x00000000 0xd 0x00000000 0x80000000 0xd 0x80000000 0xd 0x80000000 0x80000000 @@ -400,6 +407,49 @@ 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; }; + + I2O: i2o@400100000 { + compatible = "ibm,i2o-440spe"; + reg = <0x00000004 0x00100000 0x100>; + dcr-reg = <0x060 0x020>; + }; + + DMA0: dma0@400100100 { + compatible = "ibm,dma-440spe"; + cell-index = <0>; + reg = <0x00000004 0x00100100 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x14 4 + 1 &UIC1 0x16 4>; + }; + + DMA1: dma1@400100200 { + compatible = "ibm,dma-440spe"; + cell-index = <1>; + reg = <0x00000004 0x00100200 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x16 4 + 1 &UIC1 0x16 4>; + }; + + xor-accel@400200000 { + compatible = "amcc,xor-accelerator"; + reg = <0x00000004 0x00200000 0x400>; + interrupt-parent = <&UIC1>; + interrupts = <0x1f 4>; + }; }; chosen { -- GitLab From a18cb387e5c29be5c95cded5b5a55110bb930f5c Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Tue, 8 Dec 2009 19:04:37 +0000 Subject: [PATCH 065/618] powerpc/44x: Increase warp SD buffer Newer revs of the FPGA have a larger SD buffer. Signed-off-by: Sean MacLennan Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/warp.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index 31605ee4afb6..e576ee85c42f 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -146,7 +146,7 @@ fpga@2,4000 { compatible = "pika,fpga-sd"; - reg = <0x00000002 0x00004000 0x00000A00>; + reg = <0x00000002 0x00004000 0x00004000>; }; nor@0,0 { -- GitLab From 23e707dd9b0b26215d801c59e87feed1c218a0f9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 11 Dec 2009 15:38:46 -0800 Subject: [PATCH 066/618] Staging: batman: fix debug Kconfig option The debug batman option needs to depend on the correct config option. Signed-off-by: Greg Kroah-Hartman --- drivers/staging/batman-adv/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/batman-adv/Kconfig b/drivers/staging/batman-adv/Kconfig index b9742e7c7d9e..7632f5760060 100644 --- a/drivers/staging/batman-adv/Kconfig +++ b/drivers/staging/batman-adv/Kconfig @@ -15,7 +15,7 @@ config BATMAN_ADV config BATMAN_DEBUG bool "B.A.T.M.A.N. debugging" - depends on BATMAN != n + depends on BATMAN_ADV != n help This is an option for use by developers; most people should -- GitLab From 4a2ff67c88211026afcbdbc190c13f705dae1b59 Mon Sep 17 00:00:00 2001 From: Michael Tokarev Date: Tue, 13 Oct 2009 22:22:46 +0200 Subject: [PATCH 067/618] kbuild: fix bzImage build for x86 As has been discussed previously (and Sam has been CC'ed), the fix is still incorrect. It replaces "echo -ne" with "/bin/echo -ne", but neither of the two are guaranteed to support the necessary arguments and necessary (hexadecimal) escape sequences. What should be used here is printf(1). The trivial patch below (on top of these kbuild changes) fixes this issue. Signed-Off-By: Michael Tokarev Signed-off-by: Sam Ravnborg Signed-off-by: Michal Marek --- scripts/Makefile.lib | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index ffdafb26f539..d9f0cb837400 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -208,7 +208,7 @@ cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -f -9 > $@) || \ # Bzip2 and LZMA do not include size in file... so we have to fake that; # append the size as a 32-bit littleendian number as gzip does. -size_append = /bin/echo -ne $(shell \ +size_append = printf $(shell \ dec_size=0; \ for F in $1; do \ fsize=$$(stat -c "%s" $$F); \ -- GitLab From 24a675e8b86bef077e549a5ea2c6936989be4815 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 17 Oct 2009 21:14:18 +0200 Subject: [PATCH 068/618] kbuild: search arch/$ARCH/include before include/ The namespace used in arch/$ARCH/include is different from what is used in include/ except for the include/asm directory. This patch gives the arch/$ARCH/include/asm directory priority over include/asm. When we add asm-offsets.h to arch/$ARCH/include/asm/ this patch makes sure we pick up the arch specific version and not the one we have in include/asm. The situation with an asm-offsets.h file located in both include/asm _and_ arch/$ARCH/include/asm will happen when we move more files over to include/generated. This happens because in some cases it is not practical to rename all users so we simply add a file in arch/$ARCH/include/asm that includes the generated version. This is the solution we use for asm-offsets.h as an example. Signed-off-by: Sam Ravnborg Cc: Stephen Rothwell Signed-off-by: Michal Marek --- Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 33d4732a6c4a..07711786dc95 100644 --- a/Makefile +++ b/Makefile @@ -334,9 +334,8 @@ CFLAGS_GCOV = -fprofile-arcs -ftest-coverage # Use LINUXINCLUDE when you must reference the include/ directory. # Needed to be compatible with the O= option -LINUXINCLUDE := -Iinclude \ +LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include -Iinclude \ $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \ - -I$(srctree)/arch/$(hdr-arch)/include \ -include include/linux/autoconf.h KBUILD_CPPFLAGS := -D__KERNEL__ -- GitLab From 9367858dd08caf4e6ebd511abd2fca0a2d87b648 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 17 Oct 2009 21:33:34 +0200 Subject: [PATCH 069/618] dontdiff: add generated We move more and more stuff to include/generated - so lets ignore the content for users of plain diff. Signed-off-by: Sam Ravnborg Signed-off-by: Michal Marek --- Documentation/dontdiff | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/dontdiff b/Documentation/dontdiff index e151b2a36267..3ad6acead949 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -103,6 +103,7 @@ gconf gen-devlist gen_crc32table gen_init_cpio +generated genheaders genksyms *_gray256.c -- GitLab From 01fc0ac198eabcbf460e1ed058860a935b6c2c9a Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 19 Apr 2009 21:57:19 +0200 Subject: [PATCH 070/618] kbuild: move bounds.h to include/generated Signed-off-by: Sam Ravnborg Cc: Al Viro Signed-off-by: Michal Marek --- .gitignore | 1 - Kbuild | 2 +- Makefile | 2 +- include/linux/mmzone.h | 2 +- include/linux/page-flags.h | 2 +- kernel/bounds.c | 2 +- 6 files changed, 5 insertions(+), 6 deletions(-) diff --git a/.gitignore b/.gitignore index 946c7ec5c922..36d9cd6d4281 100644 --- a/.gitignore +++ b/.gitignore @@ -52,7 +52,6 @@ include/linux/autoconf.h include/linux/compile.h include/linux/version.h include/linux/utsrelease.h -include/linux/bounds.h include/generated # stgit generated dirs diff --git a/Kbuild b/Kbuild index f056b4feee51..1165d7a5ca4a 100644 --- a/Kbuild +++ b/Kbuild @@ -8,7 +8,7 @@ ##### # 1) Generate bounds.h -bounds-file := include/linux/bounds.h +bounds-file := include/generated/bounds.h always := $(bounds-file) targets := $(bounds-file) kernel/bounds.s diff --git a/Makefile b/Makefile index 07711786dc95..b58e9312ce30 100644 --- a/Makefile +++ b/Makefile @@ -1197,7 +1197,7 @@ MRPROPER_DIRS += include/config include2 usr/include include/generated MRPROPER_FILES += .config .config.old include/asm .version .old_version \ include/linux/autoconf.h include/linux/version.h \ include/linux/utsrelease.h \ - include/linux/bounds.h include/asm*/asm-offsets.h \ + include/asm*/asm-offsets.h \ Module.symvers Module.markers tags TAGS cscope* # clean - Delete most, but leave enough to build external modules diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 6f7561730d88..30fe668c2542 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 6b202b173955..ef36725aa515 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -8,7 +8,7 @@ #include #ifndef __GENERATING_BOUNDS_H #include -#include +#include #endif /* !__GENERATING_BOUNDS_H */ /* diff --git a/kernel/bounds.c b/kernel/bounds.c index 3c5301381837..98a51f26c136 100644 --- a/kernel/bounds.c +++ b/kernel/bounds.c @@ -12,7 +12,7 @@ void foo(void) { - /* The enum constants to put into include/linux/bounds.h */ + /* The enum constants to put into include/generated/bounds.h */ DEFINE(NR_PAGEFLAGS, __NR_PAGEFLAGS); DEFINE(MAX_NR_ZONES, __MAX_NR_ZONES); /* End of constants */ -- GitLab From 559df2e0210352f83926d178c40c51142292a18c Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 19 Apr 2009 22:35:10 +0200 Subject: [PATCH 071/618] kbuild: move asm-offsets.h to include/generated The simplest method was to add an extra asm-offsets.h file in arch/$ARCH/include/asm that references the generated file. We can now migrate the architectures one-by-one to reference the generated file direct - and when done we can delete the temporary arch/$ARCH/include/asm/asm-offsets.h file. Signed-off-by: Sam Ravnborg Cc: Al Viro Signed-off-by: Michal Marek --- .gitignore | 1 - Kbuild | 2 +- Makefile | 1 - arch/alpha/include/asm/asm-offsets.h | 1 + arch/arm/include/asm/asm-offsets.h | 1 + arch/avr32/include/asm/asm-offsets.h | 1 + arch/blackfin/include/asm/asm-offsets.h | 1 + arch/cris/include/asm/asm-offsets.h | 1 + arch/frv/include/asm/asm-offsets.h | 1 + arch/h8300/include/asm/asm-offsets.h | 1 + arch/ia64/include/asm/asm-offsets.h | 1 + arch/m68k/include/asm/asm-offsets.h | 1 + arch/microblaze/include/asm/asm-offsets.h | 1 + arch/mips/include/asm/asm-offsets.h | 1 + arch/mn10300/include/asm/asm-offsets.h | 1 + arch/parisc/include/asm/asm-offsets.h | 1 + arch/powerpc/include/asm/asm-offsets.h | 1 + arch/s390/include/asm/asm-offsets.h | 1 + arch/sh/include/asm/asm-offsets.h | 1 + arch/sparc/include/asm/asm-offsets.h | 1 + arch/um/Makefile | 2 +- arch/um/include/asm/asm-offsets.h | 1 + arch/x86/include/asm/asm-offsets.h | 1 + arch/xtensa/include/asm/asm-offsets.h | 1 + 24 files changed, 22 insertions(+), 4 deletions(-) create mode 100644 arch/alpha/include/asm/asm-offsets.h create mode 100644 arch/arm/include/asm/asm-offsets.h create mode 100644 arch/avr32/include/asm/asm-offsets.h create mode 100644 arch/blackfin/include/asm/asm-offsets.h create mode 100644 arch/cris/include/asm/asm-offsets.h create mode 100644 arch/frv/include/asm/asm-offsets.h create mode 100644 arch/h8300/include/asm/asm-offsets.h create mode 100644 arch/ia64/include/asm/asm-offsets.h create mode 100644 arch/m68k/include/asm/asm-offsets.h create mode 100644 arch/microblaze/include/asm/asm-offsets.h create mode 100644 arch/mips/include/asm/asm-offsets.h create mode 100644 arch/mn10300/include/asm/asm-offsets.h create mode 100644 arch/parisc/include/asm/asm-offsets.h create mode 100644 arch/powerpc/include/asm/asm-offsets.h create mode 100644 arch/s390/include/asm/asm-offsets.h create mode 100644 arch/sh/include/asm/asm-offsets.h create mode 100644 arch/sparc/include/asm/asm-offsets.h create mode 100644 arch/um/include/asm/asm-offsets.h create mode 100644 arch/x86/include/asm/asm-offsets.h create mode 100644 arch/xtensa/include/asm/asm-offsets.h diff --git a/.gitignore b/.gitignore index 36d9cd6d4281..3582f422813b 100644 --- a/.gitignore +++ b/.gitignore @@ -46,7 +46,6 @@ Module.symvers # Generated include files # include/asm -include/asm-*/asm-offsets.h include/config include/linux/autoconf.h include/linux/compile.h diff --git a/Kbuild b/Kbuild index 1165d7a5ca4a..e3737ad72b5a 100644 --- a/Kbuild +++ b/Kbuild @@ -43,7 +43,7 @@ $(obj)/$(bounds-file): kernel/bounds.s Kbuild # 2) Generate asm-offsets.h # -offsets-file := include/asm/asm-offsets.h +offsets-file := include/generated/asm-offsets.h always += $(offsets-file) targets += $(offsets-file) diff --git a/Makefile b/Makefile index b58e9312ce30..eb43b9fa30b5 100644 --- a/Makefile +++ b/Makefile @@ -1197,7 +1197,6 @@ MRPROPER_DIRS += include/config include2 usr/include include/generated MRPROPER_FILES += .config .config.old include/asm .version .old_version \ include/linux/autoconf.h include/linux/version.h \ include/linux/utsrelease.h \ - include/asm*/asm-offsets.h \ Module.symvers Module.markers tags TAGS cscope* # clean - Delete most, but leave enough to build external modules diff --git a/arch/alpha/include/asm/asm-offsets.h b/arch/alpha/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/alpha/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/arm/include/asm/asm-offsets.h b/arch/arm/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/arm/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/avr32/include/asm/asm-offsets.h b/arch/avr32/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/avr32/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/blackfin/include/asm/asm-offsets.h b/arch/blackfin/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/blackfin/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/cris/include/asm/asm-offsets.h b/arch/cris/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/cris/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/frv/include/asm/asm-offsets.h b/arch/frv/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/frv/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/h8300/include/asm/asm-offsets.h b/arch/h8300/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/h8300/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/ia64/include/asm/asm-offsets.h b/arch/ia64/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/ia64/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68k/include/asm/asm-offsets.h b/arch/m68k/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/m68k/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/asm-offsets.h b/arch/microblaze/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/microblaze/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/mips/include/asm/asm-offsets.h b/arch/mips/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/mips/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/asm-offsets.h b/arch/mn10300/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/mn10300/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/parisc/include/asm/asm-offsets.h b/arch/parisc/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/parisc/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/powerpc/include/asm/asm-offsets.h b/arch/powerpc/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/powerpc/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/s390/include/asm/asm-offsets.h b/arch/s390/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/s390/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/asm/asm-offsets.h b/arch/sh/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/sh/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/sparc/include/asm/asm-offsets.h b/arch/sparc/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/sparc/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/um/Makefile b/arch/um/Makefile index fc633dbacf84..fab8121d2b32 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -149,6 +149,6 @@ $(SHARED_HEADERS)/user_constants.h: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s $(SHARED_HEADERS)/kern_constants.h: $(Q)mkdir -p $(dir $@) - $(Q)echo '#include "../../../../include/asm/asm-offsets.h"' >$@ + $(Q)echo '#include "../../../../include/generated/asm-offsets.h"' >$@ export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS HEADER_ARCH DEV_NULL_PATH diff --git a/arch/um/include/asm/asm-offsets.h b/arch/um/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/um/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/x86/include/asm/asm-offsets.h b/arch/x86/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/x86/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/arch/xtensa/include/asm/asm-offsets.h b/arch/xtensa/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/xtensa/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include -- GitLab From 4929d29c0dffd5fdc2df987254366c2e25c392d4 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 20 Apr 2009 19:35:54 +0200 Subject: [PATCH 072/618] ia64: move nr-irqs.h to include/generated Avoid generating files in the now deprecated asm-ia64 dir Simplified the logic in the Makefile when editing stuff in the area Signed-off-by: Sam Ravnborg Cc: Al Viro Cc: Tony Luck Cc: Fenghua Yu Signed-off-by: Michal Marek --- arch/ia64/Makefile | 2 +- arch/ia64/include/asm/irq.h | 2 +- arch/ia64/kernel/Makefile | 7 ++----- 3 files changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index e7cbaa02cd0b..475e2725fbde 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -103,4 +103,4 @@ archprepare: make_nr_irqs_h FORCE PHONY += make_nr_irqs_h FORCE make_nr_irqs_h: FORCE - $(Q)$(MAKE) $(build)=arch/ia64/kernel include/asm-ia64/nr-irqs.h + $(Q)$(MAKE) $(build)=arch/ia64/kernel include/generated/nr-irqs.h diff --git a/arch/ia64/include/asm/irq.h b/arch/ia64/include/asm/irq.h index 5282546cdf82..91b920fd7d53 100644 --- a/arch/ia64/include/asm/irq.h +++ b/arch/ia64/include/asm/irq.h @@ -13,7 +13,7 @@ #include #include -#include +#include static __inline__ int irq_canonicalize (int irq) diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index 6b7edcab0cb5..2a75e937ae8d 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -81,17 +81,14 @@ define cmd_nr_irqs endef # We use internal kbuild rules to avoid the "is up to date" message from make -arch/$(SRCARCH)/kernel/nr-irqs.s: $(srctree)/arch/$(SRCARCH)/kernel/nr-irqs.c \ - $(wildcard $(srctree)/include/asm-ia64/*/irq.h) +arch/$(SRCARCH)/kernel/nr-irqs.s: arch/$(SRCARCH)/kernel/nr-irqs.c $(Q)mkdir -p $(dir $@) $(call if_changed_dep,cc_s_c) -include/asm-ia64/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s +include/generated/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s $(Q)mkdir -p $(dir $@) $(call cmd,nr_irqs) -clean-files += $(objtree)/include/asm-ia64/nr-irqs.h - # # native ivt.S, entry.S and fsys.S # -- GitLab From 66206536fe56e889a8bd86ab5742fc76c78c5b4a Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 20 Apr 2009 19:59:58 +0200 Subject: [PATCH 073/618] arm: move mach-types to include/generated Simplified arch/arm/Makefile by dropping the maketools target It was undocumented and not needed Signed-off-by: Sam Ravnborg Cc: Al Viro Cc: Russell King Signed-off-by: Michal Marek --- arch/arm/Makefile | 14 ++------------ arch/arm/include/asm/mach-types.h | 1 + arch/arm/tools/Makefile | 2 +- arch/arm/tools/gen-mach-types | 2 +- 4 files changed, 5 insertions(+), 14 deletions(-) create mode 100644 arch/arm/include/asm/mach-types.h diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fa0cdab2e1d3..e9da08483b3c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -242,15 +242,8 @@ all: $(KBUILD_IMAGE) boot := arch/arm/boot -# Update machine arch and proc symlinks if something which affects -# them changed. We use .arch to indicate when they were updated -# last, otherwise make uses the target directory mtime. - -archprepare: maketools - -PHONY += maketools FORCE -maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h +archprepare: + $(Q)$(MAKE) $(build)=arch/arm/tools include/generated/mach-types.h # Convert bzImage to zImage bzImage: zImage @@ -261,9 +254,6 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -CLEAN_FILES += include/asm-arm/mach-types.h \ - include/asm-arm/arch include/asm-arm/.arch - # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h new file mode 100644 index 000000000000..948178cc6ba8 --- /dev/null +++ b/arch/arm/include/asm/mach-types.h @@ -0,0 +1 @@ +#include diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index 1dbaa29ac4d7..635cb1865e4d 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -4,7 +4,7 @@ # Copyright (C) 2001 Russell King # -include/asm-arm/mach-types.h: $(src)/gen-mach-types $(src)/mach-types +include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/arm/tools/gen-mach-types b/arch/arm/tools/gen-mach-types index ce319ef64bc1..04fef71d7be9 100644 --- a/arch/arm/tools/gen-mach-types +++ b/arch/arm/tools/gen-mach-types @@ -1,6 +1,6 @@ #!/bin/awk # -# Awk script to generate include/asm-arm/mach-types.h +# Awk script to generate include/generated/mach-types.h # BEGIN { nr = 0 } /^#/ { next } -- GitLab From 3252b11fc4790d046b93f300c898df2f7cd7c176 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 17 Oct 2009 22:20:22 +0200 Subject: [PATCH 074/618] sh: move machtypes.h to include/generated Signed-off-by: Sam Ravnborg Cc: Paul Mundt Cc: Al Viro Signed-off-by: Michal Marek --- arch/sh/Makefile | 10 +++------- arch/sh/drivers/pci/fixups-rts7751r2d.c | 2 +- arch/sh/include/asm/.gitignore | 1 - arch/sh/include/asm/machvec.h | 2 +- arch/sh/tools/Makefile | 4 ++-- arch/sh/tools/gen-mach-types | 2 +- 6 files changed, 8 insertions(+), 13 deletions(-) delete mode 100644 arch/sh/include/asm/.gitignore diff --git a/arch/sh/Makefile b/arch/sh/Makefile index ac17c5ac550e..db91925c79d1 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -205,10 +205,7 @@ libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \ zImage vmlinux.srec romImage -PHONY += maketools $(BOOT_TARGETS) FORCE - -maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h +PHONY += $(BOOT_TARGETS) all: $(KBUILD_IMAGE) @@ -217,7 +214,8 @@ $(BOOT_TARGETS): vmlinux compressed: zImage -archprepare: maketools +archprepare: + $(Q)$(MAKE) $(build)=arch/sh/tools include/generated/machtypes.h archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -234,5 +232,3 @@ define archhelp @echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)' @echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)' endef - -CLEAN_FILES += include/asm-sh/machtypes.h diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c index 052b354236dc..7898f14d6641 100644 --- a/arch/sh/drivers/pci/fixups-rts7751r2d.c +++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c @@ -15,7 +15,7 @@ #include #include #include "pci-sh4.h" -#include +#include #define PCIMCR_MRSET_OFF 0xBFFFFFFF #define PCIMCR_RFSH_OFF 0xFFFFFFFB diff --git a/arch/sh/include/asm/.gitignore b/arch/sh/include/asm/.gitignore deleted file mode 100644 index 378db779fb6c..000000000000 --- a/arch/sh/include/asm/.gitignore +++ /dev/null @@ -1 +0,0 @@ -machtypes.h diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h index 84dd37761f56..9c30955630ff 100644 --- a/arch/sh/include/asm/machvec.h +++ b/arch/sh/include/asm/machvec.h @@ -12,7 +12,7 @@ #include #include -#include +#include struct sh_machine_vector { void (*mv_setup)(char **cmdline_p); diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile index 567516b58acc..558a56bcc7cf 100644 --- a/arch/sh/tools/Makefile +++ b/arch/sh/tools/Makefile @@ -10,7 +10,7 @@ # Shamelessly cloned from ARM. # -include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types +include/generated/machtypes.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi + $(Q)mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/sh/tools/gen-mach-types b/arch/sh/tools/gen-mach-types index 65161e368353..f5ff7c5d8913 100644 --- a/arch/sh/tools/gen-mach-types +++ b/arch/sh/tools/gen-mach-types @@ -1,6 +1,6 @@ #!/bin/awk # -# Awk script to generate include/asm-sh/machtypes.h +# Awk script to generate include/generated/machtypes.h # Heavily based on arch/arm/tools/gen-mach-types # BEGIN { nr = 0 } -- GitLab From 96f13045b6cb0c562bf3ffd3844871811e677e63 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 17 Oct 2009 22:33:27 +0200 Subject: [PATCH 075/618] kbuild: drop include2/ used for O=... builds There is no longer any use of the include2/ directory. The generated files has moved to include/generated. Drop all references to said directory. Signed-off-by: Sam Ravnborg Signed-off-by: Michal Marek --- Makefile | 9 ++------- arch/powerpc/platforms/cell/spufs/Makefile | 6 ++---- 2 files changed, 4 insertions(+), 11 deletions(-) diff --git a/Makefile b/Makefile index eb43b9fa30b5..b9d747e4e7c0 100644 --- a/Makefile +++ b/Makefile @@ -335,7 +335,7 @@ CFLAGS_GCOV = -fprofile-arcs -ftest-coverage # Use LINUXINCLUDE when you must reference the include/ directory. # Needed to be compatible with the O= option LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include -Iinclude \ - $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \ + $(if $(KBUILD_SRC), -I$(srctree)/include) \ -include include/linux/autoconf.h KBUILD_CPPFLAGS := -D__KERNEL__ @@ -954,7 +954,6 @@ PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 # prepare3 is used to check if we are building in a separate output directory, # and if so do: # 1) Check that make has not been executed in the kernel src $(srctree) -# 2) Create the include2 directory, used for the second asm symlink prepare3: include/config/kernel.release ifneq ($(KBUILD_SRC),) @$(kecho) ' Using $(srctree) as source for kernel' @@ -963,10 +962,6 @@ ifneq ($(KBUILD_SRC),) echo " in the '$(srctree)' directory.";\ /bin/false; \ fi; - $(Q)if [ ! -d include2 ]; then \ - mkdir -p include2; \ - ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \ - fi endif # prepare2 creates a makefile if using a separate output directory @@ -1193,7 +1188,7 @@ CLEAN_FILES += vmlinux System.map \ .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map # Directories & files removed with 'make mrproper' -MRPROPER_DIRS += include/config include2 usr/include include/generated +MRPROPER_DIRS += include/config usr/include include/generated MRPROPER_FILES += .config .config.old include/asm .version .old_version \ include/linux/autoconf.h include/linux/version.h \ include/linux/utsrelease.h \ diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile index b93f877ba504..b9d5d678aa44 100644 --- a/arch/powerpc/platforms/cell/spufs/Makefile +++ b/arch/powerpc/platforms/cell/spufs/Makefile @@ -13,10 +13,8 @@ SPU_CC := $(SPU_CROSS)gcc SPU_AS := $(SPU_CROSS)gcc SPU_LD := $(SPU_CROSS)ld SPU_OBJCOPY := $(SPU_CROSS)objcopy -SPU_CFLAGS := -O2 -Wall -I$(srctree)/include \ - -I$(objtree)/include2 -D__KERNEL__ -SPU_AFLAGS := -c -D__ASSEMBLY__ -I$(srctree)/include \ - -I$(objtree)/include2 -D__KERNEL__ +SPU_CFLAGS := -O2 -Wall -I$(srctree)/include -D__KERNEL__ +SPU_AFLAGS := -c -D__ASSEMBLY__ -I$(srctree)/include -D__KERNEL__ SPU_LDFLAGS := -N -Ttext=0x0 $(obj)/switch.o: $(obj)/spu_save_dump.h $(obj)/spu_restore_dump.h -- GitLab From c95fa08a3e17c3f2983c4cbf409f5c9ae47b7dec Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 17 Oct 2009 22:47:31 +0200 Subject: [PATCH 076/618] kbuild: do not check for include/asm-$ARCH No architectures uses include/asm-$ARCH now. So drop check for location of include files Signed-off-by: Sam Ravnborg Signed-off-by: Michal Marek --- Makefile | 11 +++-------- scripts/headers.sh | 2 -- 2 files changed, 3 insertions(+), 10 deletions(-) diff --git a/Makefile b/Makefile index b9d747e4e7c0..924c62ee4d61 100644 --- a/Makefile +++ b/Makefile @@ -1070,11 +1070,6 @@ firmware_install: FORCE export INSTALL_HDR_PATH = $(objtree)/usr hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj -# Find out where the Kbuild file is located to support -# arch/$(ARCH)/include/asm -hdr-dir = $(strip \ - $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild), \ - arch/$(hdr-arch)/include/asm, include/asm-$(hdr-arch))) # If we do an all arch process set dst to asm-$(hdr-arch) hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm) @@ -1089,10 +1084,10 @@ headers_install_all: PHONY += headers_install headers_install: __headers - $(if $(wildcard $(srctree)/$(hdr-dir)/Kbuild),, \ + $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \ $(error Headers not exportable for the $(SRCARCH) architecture)) $(Q)$(MAKE) $(hdr-inst)=include - $(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) PHONY += headers_check_all headers_check_all: headers_install_all @@ -1101,7 +1096,7 @@ headers_check_all: headers_install_all PHONY += headers_check headers_check: headers_install $(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1 - $(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1 # --------------------------------------------------------------------------- # Modules diff --git a/scripts/headers.sh b/scripts/headers.sh index 0308ecc10d5b..1ddcdd38d97f 100755 --- a/scripts/headers.sh +++ b/scripts/headers.sh @@ -8,8 +8,6 @@ do_command() { if [ -f ${srctree}/arch/$2/include/asm/Kbuild ]; then make ARCH=$2 KBUILD_HEADERS=$1 headers_$1 - elif [ -f ${srctree}/include/asm-$2/Kbuild ]; then - make ARCH=$2 KBUILD_HEADERS=$1 headers_$1 else printf "Ignoring arch: %s\n" ${arch} fi -- GitLab From f7f16b7799ed68654850ab340ef812895aebcf4c Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 18 Oct 2009 00:00:43 +0200 Subject: [PATCH 077/618] kbuild: drop include/asm We no longer use this directory for generated files and all architectures has moved their header files so no symlink tricks are needed either. Drop the symlink and drop the ARCH check. If we really need to check that the SRCARCH has not changed when we build a kernel we can add this check back - but then we will find a more convenient way to store the info. Signed-off-by: Sam Ravnborg Signed-off-by: Michal Marek --- .gitignore | 1 - Makefile | 40 ++-------------------------------------- 2 files changed, 2 insertions(+), 39 deletions(-) diff --git a/.gitignore b/.gitignore index 3582f422813b..e074c1cc5794 100644 --- a/.gitignore +++ b/.gitignore @@ -45,7 +45,6 @@ Module.symvers # # Generated include files # -include/asm include/config include/linux/autoconf.h include/linux/compile.h diff --git a/Makefile b/Makefile index 924c62ee4d61..86b66cf85ced 100644 --- a/Makefile +++ b/Makefile @@ -968,7 +968,7 @@ endif prepare2: prepare3 outputmakefile prepare1: prepare2 include/linux/version.h include/linux/utsrelease.h \ - include/asm include/config/auto.conf + include/config/auto.conf $(cmd_crmodverdir) archprepare: prepare1 scripts_basic @@ -980,42 +980,6 @@ prepare0: archprepare FORCE # All the preparing.. prepare: prepare0 -# The asm symlink changes when $(ARCH) changes. -# Detect this and ask user to run make mrproper -# If asm is a stale symlink (point to dir that does not exist) remove it -define check-symlink - set -e; \ - if [ -L include/asm ]; then \ - asmlink=`readlink include/asm | cut -d '-' -f 2`; \ - if [ "$$asmlink" != "$(SRCARCH)" ]; then \ - echo "ERROR: the symlink $@ points to asm-$$asmlink but asm-$(SRCARCH) was expected"; \ - echo " set ARCH or save .config and run 'make mrproper' to fix it"; \ - exit 1; \ - fi; \ - test -e $$asmlink || rm include/asm; \ - elif [ -d include/asm ]; then \ - echo "ERROR: $@ is a directory but a symlink was expected";\ - exit 1; \ - fi -endef - -# We create the target directory of the symlink if it does -# not exist so the test in check-symlink works and we have a -# directory for generated filesas used by some architectures. -define create-symlink - if [ ! -L include/asm ]; then \ - $(kecho) ' SYMLINK $@ -> include/asm-$(SRCARCH)'; \ - if [ ! -d include/asm-$(SRCARCH) ]; then \ - mkdir -p include/asm-$(SRCARCH); \ - fi; \ - ln -fsn asm-$(SRCARCH) $@; \ - fi -endef - -include/asm: FORCE - $(Q)$(check-symlink) - $(Q)$(create-symlink) - # Generate some files # --------------------------------------------------------------------------- @@ -1184,7 +1148,7 @@ CLEAN_FILES += vmlinux System.map \ # Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config usr/include include/generated -MRPROPER_FILES += .config .config.old include/asm .version .old_version \ +MRPROPER_FILES += .config .config.old .version .old_version \ include/linux/autoconf.h include/linux/version.h \ include/linux/utsrelease.h \ Module.symvers Module.markers tags TAGS cscope* -- GitLab From 92045954058671fdd0ccf031ca06611ce1d929d1 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 18 Oct 2009 00:36:47 +0200 Subject: [PATCH 078/618] kbuild: move compile.h to include/generated Signed-off-by: Sam Ravnborg Signed-off-by: Michal Marek --- .gitignore | 1 - arch/x86/boot/version.c | 2 +- init/Makefile | 8 ++------ init/version.c | 2 +- 4 files changed, 4 insertions(+), 9 deletions(-) diff --git a/.gitignore b/.gitignore index e074c1cc5794..c06b4c9aeb72 100644 --- a/.gitignore +++ b/.gitignore @@ -47,7 +47,6 @@ Module.symvers # include/config include/linux/autoconf.h -include/linux/compile.h include/linux/version.h include/linux/utsrelease.h include/generated diff --git a/arch/x86/boot/version.c b/arch/x86/boot/version.c index 2723d9b5ce43..4d88763e39cb 100644 --- a/arch/x86/boot/version.c +++ b/arch/x86/boot/version.c @@ -14,7 +14,7 @@ #include "boot.h" #include -#include +#include const char kernel_version[] = UTS_RELEASE " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ") " diff --git a/init/Makefile b/init/Makefile index 4a243df426f7..0bf677aa0872 100644 --- a/init/Makefile +++ b/init/Makefile @@ -15,12 +15,8 @@ mounts-$(CONFIG_BLK_DEV_RAM) += do_mounts_rd.o mounts-$(CONFIG_BLK_DEV_INITRD) += do_mounts_initrd.o mounts-$(CONFIG_BLK_DEV_MD) += do_mounts_md.o -# files to be removed upon make clean -clean-files := ../include/linux/compile.h - # dependencies on generated files need to be listed explicitly - -$(obj)/version.o: include/linux/compile.h +$(obj)/version.o: include/generated/compile.h # compile.h changes depending on hostname, generation number, etc, # so we regenerate it always. @@ -30,7 +26,7 @@ $(obj)/version.o: include/linux/compile.h chk_compile.h = : quiet_chk_compile.h = echo ' CHK $@' silent_chk_compile.h = : -include/linux/compile.h: FORCE +include/generated/compile.h: FORCE @$($(quiet)chk_compile.h) $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \ "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)" "$(CC) $(KBUILD_CFLAGS)" diff --git a/init/version.c b/init/version.c index 52a8b98642b8..82328aaca1ef 100644 --- a/init/version.c +++ b/init/version.c @@ -6,7 +6,7 @@ * May be freely distributed as part of Linux. */ -#include +#include #include #include #include -- GitLab From 98b8788ae91694499d1995035625bea16a4db0c4 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 18 Oct 2009 00:39:40 +0200 Subject: [PATCH 079/618] drop explicit include of autoconf.h kbuild.h forces include of autoconf.h on the commandline using -include - so we do not need to include the file explicit. Signed-off-by: Sam Ravnborg Signed-off-by: Michal Marek --- arch/cris/arch-v32/kernel/head.S | 1 - arch/cris/kernel/asm-offsets.c | 1 - arch/cris/kernel/vmlinux.lds.S | 1 - arch/ia64/kvm/asm-offsets.c | 1 - drivers/accessibility/braille/braille_console.c | 1 - drivers/hid/hid-lg.h | 2 -- drivers/platform/x86/compal-laptop.c | 1 - drivers/staging/iio/ring_sw.h | 1 - include/linux/mmdebug.h | 2 -- 9 files changed, 11 deletions(-) diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S index 3db478eb5155..76266f80a5f1 100644 --- a/arch/cris/arch-v32/kernel/head.S +++ b/arch/cris/arch-v32/kernel/head.S @@ -10,7 +10,6 @@ * The macros found in mmu_defs_asm.h uses the ## concatenation operator, so * -traditional must not be used when assembling this file. */ -#include #include #include #include diff --git a/arch/cris/kernel/asm-offsets.c b/arch/cris/kernel/asm-offsets.c index ddd6fbbe75de..dd7b8e983221 100644 --- a/arch/cris/kernel/asm-offsets.c +++ b/arch/cris/kernel/asm-offsets.c @@ -1,6 +1,5 @@ #include #include -#include /* * Generate definitions needed by assembly language modules. diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S index bbfda67d2907..d49d17d2a14f 100644 --- a/arch/cris/kernel/vmlinux.lds.S +++ b/arch/cris/kernel/vmlinux.lds.S @@ -8,7 +8,6 @@ * the kernel has booted. */ -#include #include #include diff --git a/arch/ia64/kvm/asm-offsets.c b/arch/ia64/kvm/asm-offsets.c index 0c3564a7a033..9324c875caf5 100644 --- a/arch/ia64/kvm/asm-offsets.c +++ b/arch/ia64/kvm/asm-offsets.c @@ -22,7 +22,6 @@ * */ -#include #include #include diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c index d672cfe7ca59..cb423f5aef24 100644 --- a/drivers/accessibility/braille/braille_console.c +++ b/drivers/accessibility/braille/braille_console.c @@ -21,7 +21,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include diff --git a/drivers/hid/hid-lg.h b/drivers/hid/hid-lg.h index 27ae750ca878..bf31592eaf79 100644 --- a/drivers/hid/hid-lg.h +++ b/drivers/hid/hid-lg.h @@ -1,8 +1,6 @@ #ifndef __HID_LG_H #define __HID_LG_H -#include - #ifdef CONFIG_LOGITECH_FF int lgff_init(struct hid_device *hdev); #else diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index 11003bba10d3..1a387e79f719 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -51,7 +51,6 @@ #include #include #include -#include #define COMPAL_DRIVER_VERSION "0.2.6" diff --git a/drivers/staging/iio/ring_sw.h b/drivers/staging/iio/ring_sw.h index f0b86f02cd80..fd677f008365 100644 --- a/drivers/staging/iio/ring_sw.h +++ b/drivers/staging/iio/ring_sw.h @@ -29,7 +29,6 @@ * driver requests - some may support multiple options */ -#include #include "iio.h" #include "ring_generic.h" diff --git a/include/linux/mmdebug.h b/include/linux/mmdebug.h index 8a5509877192..ee24ef8ab616 100644 --- a/include/linux/mmdebug.h +++ b/include/linux/mmdebug.h @@ -1,8 +1,6 @@ #ifndef LINUX_MM_DEBUG_H #define LINUX_MM_DEBUG_H 1 -#include - #ifdef CONFIG_DEBUG_VM #define VM_BUG_ON(cond) BUG_ON(cond) #else -- GitLab From 264a26838056fc2d759f58bec2e720e01fcb1bdb Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 18 Oct 2009 00:49:24 +0200 Subject: [PATCH 080/618] kbuild: move autoconf.h to include/generated Signed-off-by: Sam Ravnborg Signed-off-by: Michal Marek --- .gitignore | 1 - Documentation/kbuild/kconfig.txt | 3 ++- Makefile | 11 ++++++----- arch/m68k/kernel/head.S | 2 +- scripts/basic/fixdep.c | 10 +++++----- scripts/kconfig/confdata.c | 2 +- scripts/mkcompile_h | 2 +- 7 files changed, 16 insertions(+), 15 deletions(-) diff --git a/.gitignore b/.gitignore index c06b4c9aeb72..c6c19ea6ea96 100644 --- a/.gitignore +++ b/.gitignore @@ -46,7 +46,6 @@ Module.symvers # Generated include files # include/config -include/linux/autoconf.h include/linux/version.h include/linux/utsrelease.h include/generated diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index 849b5e56d06f..ab8dc3538988 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -106,7 +106,8 @@ This environment variable can be set to specify the path & name of the KCONFIG_AUTOHEADER -------------------------------------------------- This environment variable can be set to specify the path & name of the -"autoconf.h" (header) file. Its default value is "include/linux/autoconf.h". +"autoconf.h" (header) file. +Its default value is "include/generated/autoconf.h". ====================================================================== diff --git a/Makefile b/Makefile index 86b66cf85ced..3bdd932e3d88 100644 --- a/Makefile +++ b/Makefile @@ -336,7 +336,7 @@ CFLAGS_GCOV = -fprofile-arcs -ftest-coverage # Needed to be compatible with the O= option LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include -Iinclude \ $(if $(KBUILD_SRC), -I$(srctree)/include) \ - -include include/linux/autoconf.h + -include include/generated/autoconf.h KBUILD_CPPFLAGS := -D__KERNEL__ @@ -492,17 +492,18 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; # if auto.conf.cmd is missing then we are probably in a cleaned tree so # we execute the config step to be sure to catch updated Kconfig files include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd + $(Q)mkdir -p include/generated $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig else -# external modules needs include/linux/autoconf.h and include/config/auto.conf +# external modules needs include/generated/autoconf.h and include/config/auto.conf # but do not care if they are up-to-date. Use auto.conf to trigger the test PHONY += include/config/auto.conf include/config/auto.conf: - $(Q)test -e include/linux/autoconf.h -a -e $@ || ( \ + $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ - echo " include/linux/autoconf.h or $@ are missing."; \ + echo " include/generated/autoconf.h or $@ are missing.";\ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo; \ /bin/false) @@ -1149,7 +1150,7 @@ CLEAN_FILES += vmlinux System.map \ # Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config usr/include include/generated MRPROPER_FILES += .config .config.old .version .old_version \ - include/linux/autoconf.h include/linux/version.h \ + include/linux/version.h \ include/linux/utsrelease.h \ Module.symvers Module.markers tags TAGS cscope* diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index 86edb5fbcfc3..ef54128baa0b 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -196,7 +196,7 @@ * for them and trying to understand what they mean. * * CONFIG_xxx: These are the obvious machine configuration defines created - * during configuration. These are defined in include/linux/autoconf.h. + * during configuration. These are defined in autoconf.h. * * CONSOLE: There is support for head.S console in this file. This * console can talk to a Mac frame buffer, but could easily be extrapolated diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c index 6bf21f83837d..ea26b23de082 100644 --- a/scripts/basic/fixdep.c +++ b/scripts/basic/fixdep.c @@ -16,15 +16,15 @@ * tells make when to remake a file. * * To use this list as-is however has the drawback that virtually - * every file in the kernel includes . + * every file in the kernel includes autoconf.h. * - * If the user re-runs make *config, linux/autoconf.h will be + * If the user re-runs make *config, autoconf.h will be * regenerated. make notices that and will rebuild every file which * includes autoconf.h, i.e. basically all files. This is extremely * annoying if the user just changed CONFIG_HIS_DRIVER from n to m. * * So we play the same trick that "mkdep" played before. We replace - * the dependency on linux/autoconf.h by a dependency on every config + * the dependency on autoconf.h by a dependency on every config * option which is mentioned in any of the listed prequisites. * * kconfig populates a tree in include/config/ with an empty file @@ -73,7 +73,7 @@ * cmd_ = * * and then basically copies the ..d file to stdout, in the - * process filtering out the dependency on linux/autoconf.h and adding + * process filtering out the dependency on autoconf.h and adding * dependencies on include/config/my/option.h for every * CONFIG_MY_OPTION encountered in any of the prequisites. * @@ -324,7 +324,7 @@ static void parse_dep_file(void *map, size_t len) p++; } memcpy(s, m, p-m); s[p-m] = 0; - if (strrcmp(s, "include/linux/autoconf.h") && + if (strrcmp(s, "include/generated/autoconf.h") && strrcmp(s, "arch/um/include/uml-config.h") && strrcmp(s, ".ver")) { printf(" %s \\\n", s); diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index b55e72ff2fc6..797a7410f690 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -776,7 +776,7 @@ int conf_write_autoconf(void) name = getenv("KCONFIG_AUTOHEADER"); if (!name) - name = "include/linux/autoconf.h"; + name = "include/generated/autoconf.h"; if (rename(".tmpconfig.h", name)) return 1; name = conf_get_autoconfig_name(); diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h index bce3d0fe6fbd..23dbad80cce9 100755 --- a/scripts/mkcompile_h +++ b/scripts/mkcompile_h @@ -14,7 +14,7 @@ vecho() { [ "${quiet}" = "silent_" ] || echo "$@" ; } # So "sudo make install" won't change the "compiled by " # do "compiled by root" -if [ -r $TARGET -a ! -O include/linux/autoconf.h ]; then +if [ -r $TARGET -a ! -O include/generated/autoconf.h ]; then vecho " SKIPPED $TARGET" exit 0 fi -- GitLab From 273b281fa22c293963ee3e6eec418f5dda2dbc83 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 18 Oct 2009 00:52:28 +0200 Subject: [PATCH 081/618] kbuild: move utsrelease.h to include/generated Fix up all users of utsrelease.h Signed-off-by: Sam Ravnborg Signed-off-by: Michal Marek --- .gitignore | 1 - Makefile | 5 ++--- arch/alpha/boot/bootp.c | 2 +- arch/alpha/boot/bootpz.c | 2 +- arch/alpha/boot/main.c | 2 +- arch/frv/kernel/setup.c | 2 +- arch/powerpc/platforms/52xx/efika.c | 2 +- arch/powerpc/platforms/amigaone/setup.c | 2 +- arch/powerpc/platforms/chrp/setup.c | 2 +- arch/powerpc/platforms/powermac/bootx_init.c | 2 +- arch/x86/boot/header.S | 2 +- arch/x86/boot/version.c | 2 +- drivers/staging/panel/panel.c | 2 +- include/linux/vermagic.h | 2 +- init/version.c | 2 +- kernel/kexec.c | 2 +- kernel/trace/trace.c | 2 +- 17 files changed, 17 insertions(+), 19 deletions(-) diff --git a/.gitignore b/.gitignore index c6c19ea6ea96..002d5304968b 100644 --- a/.gitignore +++ b/.gitignore @@ -47,7 +47,6 @@ Module.symvers # include/config include/linux/version.h -include/linux/utsrelease.h include/generated # stgit generated dirs diff --git a/Makefile b/Makefile index 3bdd932e3d88..860224d7cbcf 100644 --- a/Makefile +++ b/Makefile @@ -968,7 +968,7 @@ endif # prepare2 creates a makefile if using a separate output directory prepare2: prepare3 outputmakefile -prepare1: prepare2 include/linux/version.h include/linux/utsrelease.h \ +prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \ include/config/auto.conf $(cmd_crmodverdir) @@ -1005,7 +1005,7 @@ endef include/linux/version.h: $(srctree)/Makefile FORCE $(call filechk,version.h) -include/linux/utsrelease.h: include/config/kernel.release FORCE +include/generated/utsrelease.h: include/config/kernel.release FORCE $(call filechk,utsrelease.h) PHONY += headerdep @@ -1151,7 +1151,6 @@ CLEAN_FILES += vmlinux System.map \ MRPROPER_DIRS += include/config usr/include include/generated MRPROPER_FILES += .config .config.old .version .old_version \ include/linux/version.h \ - include/linux/utsrelease.h \ Module.symvers Module.markers tags TAGS cscope* # clean - Delete most, but leave enough to build external modules diff --git a/arch/alpha/boot/bootp.c b/arch/alpha/boot/bootp.c index 3af21c789339..3c8d1b25c661 100644 --- a/arch/alpha/boot/bootp.c +++ b/arch/alpha/boot/bootp.c @@ -9,7 +9,7 @@ */ #include #include -#include +#include #include #include diff --git a/arch/alpha/boot/bootpz.c b/arch/alpha/boot/bootpz.c index 1036b515e20c..ade3f129dc27 100644 --- a/arch/alpha/boot/bootpz.c +++ b/arch/alpha/boot/bootpz.c @@ -11,7 +11,7 @@ */ #include #include -#include +#include #include #include diff --git a/arch/alpha/boot/main.c b/arch/alpha/boot/main.c index 89f3be071ae5..644b7db55438 100644 --- a/arch/alpha/boot/main.c +++ b/arch/alpha/boot/main.c @@ -7,7 +7,7 @@ */ #include #include -#include +#include #include #include diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c index 55e4fab7c0bc..75cf7f4b2fa8 100644 --- a/arch/frv/kernel/setup.c +++ b/arch/frv/kernel/setup.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. */ -#include +#include #include #include #include diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c index bcc69e1f77c1..45c0cb9b67e6 100644 --- a/arch/powerpc/platforms/52xx/efika.c +++ b/arch/powerpc/platforms/52xx/efika.c @@ -10,7 +10,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c index 9290a7a442d0..fb4eb0df054c 100644 --- a/arch/powerpc/platforms/amigaone/setup.c +++ b/arch/powerpc/platforms/amigaone/setup.c @@ -14,7 +14,7 @@ #include #include -#include +#include #include #include diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index cd4ad9aea760..0a6f5ab8aab3 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index cf660916ae0b..9dd789a7370d 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index b31cc54b4641..93e689f4bd86 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -16,7 +16,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/x86/boot/version.c b/arch/x86/boot/version.c index 4d88763e39cb..2b15aa488ffb 100644 --- a/arch/x86/boot/version.c +++ b/arch/x86/boot/version.c @@ -13,7 +13,7 @@ */ #include "boot.h" -#include +#include #include const char kernel_version[] = diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 4ce399b6d237..f98a52448eae 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -55,7 +55,7 @@ #include #include #include -#include +#include #include #include diff --git a/include/linux/vermagic.h b/include/linux/vermagic.h index 79b9837d9ca0..cf97b5b9d1fe 100644 --- a/include/linux/vermagic.h +++ b/include/linux/vermagic.h @@ -1,4 +1,4 @@ -#include +#include #include /* Simply sanity version stamp for modules. */ diff --git a/init/version.c b/init/version.c index 82328aaca1ef..adff586401a5 100644 --- a/init/version.c +++ b/init/version.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #include #ifndef CONFIG_KALLSYMS diff --git a/kernel/kexec.c b/kernel/kexec.c index f336e2107f98..83f54e2a6eed 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 88bd9ae2a9ed..bfb1b64bfa9d 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -12,7 +12,7 @@ * Copyright (C) 2004 William Lee Irwin III */ #include -#include +#include #include #include #include -- GitLab From 7a77080dbec28ab2bceb422398601dcc53c142ad Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Thu, 12 Nov 2009 17:59:56 +0800 Subject: [PATCH 082/618] net: add net_tstamp.h to headers_install include/linux/net_tstamp.h is userspace API for hardware time stamping of network packets. It should be exported to userspace. Signed-off-by: Jie Zhang Signed-off-by: Barry Song Signed-off-by: Patrick Ohly Signed-off-by: Michal Marek --- include/linux/Kbuild | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/Kbuild b/include/linux/Kbuild index f72914db2a11..756f831cbdd5 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -118,6 +118,7 @@ header-y += mtio.h header-y += ncp_no.h header-y += neighbour.h header-y += net_dropmon.h +header-y += net_tstamp.h header-y += netfilter_arp.h header-y += netrom.h header-y += nfs2.h -- GitLab From 8723eaeff59a5146326288392f08be4c894fdad7 Mon Sep 17 00:00:00 2001 From: Wenji Huang Date: Thu, 19 Nov 2009 08:44:32 +0800 Subject: [PATCH 083/618] Kbuild: clean up marker Drop Module.markers from cleaning list since marker is removed. Signed-off-by: Wenji Huang Signed-off-by: Michal Marek --- Makefile | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/Makefile b/Makefile index 860224d7cbcf..96b32e5bb973 100644 --- a/Makefile +++ b/Makefile @@ -1151,7 +1151,7 @@ CLEAN_FILES += vmlinux System.map \ MRPROPER_DIRS += include/config usr/include include/generated MRPROPER_FILES += .config .config.old .version .old_version \ include/linux/version.h \ - Module.symvers Module.markers tags TAGS cscope* + Module.symvers tags TAGS cscope* # clean - Delete most, but leave enough to build external modules # @@ -1170,7 +1170,7 @@ clean: archclean $(clean-dirs) \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' -o -name 'modules.order' \ - -o -name 'Module.markers' -o -name '.tmp_*.o.*' \ + -o -name '.tmp_*.o.*' \ -o -name '*.gcno' \) -type f -print | xargs rm -f # mrproper - Delete all generated files, including .config @@ -1368,7 +1368,6 @@ $(clean-dirs): clean: rm-dirs := $(MODVERDIR) clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \ - $(KBUILD_EXTMOD)/Module.markers \ $(KBUILD_EXTMOD)/modules.order clean: $(clean-dirs) $(call cmd,rmdirs) -- GitLab From 91d161857ce9672bd2a8cd99ff712a67186e2e76 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Tue, 24 Nov 2009 09:11:37 -0600 Subject: [PATCH 084/618] scripts/package: tar-pkg: use tar --owner=root Use the --owner= and --group= options to make sure the entries in the built tar file are owned by root. Without this change, a careless sysadmin using the tar-pkg target can easily end up installing a kernel that is writable by the unprivileged user account used to build the kernel. Test that these options are understood before using them so that non-GNU versions of tar can still be used if the operator is appropriately cautious. Signed-off-by: Jonathan Nieder Signed-off-by: Michal Marek --- scripts/package/buildtar | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/scripts/package/buildtar b/scripts/package/buildtar index b1fd48db1640..51b2aa0acb82 100644 --- a/scripts/package/buildtar +++ b/scripts/package/buildtar @@ -101,7 +101,11 @@ esac # ( cd "${tmpdir}" - tar cf - . | ${compress} > "${tarball}${file_ext}" + opts= + if tar --owner=root --group=root --help >/dev/null 2>&1; then + opts="--owner=root --group=root" + fi + tar cf - . $opts | ${compress} > "${tarball}${file_ext}" ) echo "Tarball successfully created in ${tarball}${file_ext}" -- GitLab From 05ba4488a51edde95df3f89987fdcdbca7c3cebb Mon Sep 17 00:00:00 2001 From: Jonathan Nieder Date: Tue, 24 Nov 2009 09:14:41 -0600 Subject: [PATCH 085/618] scripts/package: add KBUILD_PKG_ROOTCMD variable Let the deb-pkg target acquire (fake) root privileges before running commands that need them. Without such privileges, deb-pkg errors out because chown fails. The new KBUILD_PKG_ROOTCMD variable, if defined, is used as a command to run other commands with possibly fake elevated privileges. Since this is not needed for the tar-pkg and rpm-pkg targets, it is only used by deb-pkg. If it is not defined, the behavior is as before, and the user will have to rerun make as root. In other words, as a shortcut, instead of running 'make oldconfig && make && fakeroot -u make deb-pkg', one can use the single command 'make oldconfig deb-pkg KBUILD_PKG_ROOTCMD="fakeroot -u"'. Suggested-by: Ryan Anderson Signed-off-by: Jonathan Nieder Signed-off-by: Michal Marek --- scripts/package/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/scripts/package/Makefile b/scripts/package/Makefile index f67cc885c807..5c0b43aaf63b 100644 --- a/scripts/package/Makefile +++ b/scripts/package/Makefile @@ -79,7 +79,8 @@ clean-files += $(objtree)/binkernel.spec # --------------------------------------------------------------------------- deb-pkg: FORCE $(MAKE) KBUILD_SRC= - $(CONFIG_SHELL) $(srctree)/scripts/package/builddeb + $(KBUILD_PKG_ROOTCMD) $(CONFIG_SHELL) \ + $(srctree)/scripts/package/builddeb clean-dirs += $(objtree)/debian/ -- GitLab From db1d18657c96cc675596077cb60ef50fbe1947f8 Mon Sep 17 00:00:00 2001 From: Jonathan Nieder Date: Tue, 24 Nov 2009 09:21:56 -0600 Subject: [PATCH 086/618] scripts/package: deb-pkg: use fakeroot if available Running "make deb-pkg" requires setting KBUILD_PKG_ROOTCMD or becoming root oneself or it errors out. Unless already running as root or KBUILD_PKG_ROOTCMD is already set, use fakeroot as a good default. With this patch applied, you can run "make oldconfig deb-pkg" as an ordinary user to build a binary package for an updated kernel tree and it should just work. fakeroot is too zealous by default in treating files as owned by root. Its wrapped stat() sets st_uid and st_gid to 0 for all files, which causes Git to go on a wild goose chase if CONFIG_LOCALVERSION_AUTO is set, checking if any file's content has changed along with its stat information. Avoid this by telling fakeroot to use the actual owner and group for preexisting files, by passing it the -u option. Signed-off-by: Jonathan Nieder Signed-off-by: Michal Marek --- scripts/package/Makefile | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/scripts/package/Makefile b/scripts/package/Makefile index 5c0b43aaf63b..62fcc3a7f4d3 100644 --- a/scripts/package/Makefile +++ b/scripts/package/Makefile @@ -77,10 +77,27 @@ clean-files += $(objtree)/binkernel.spec # Deb target # --------------------------------------------------------------------------- +quiet_cmd_builddeb = BUILDDEB + cmd_builddeb = set -e; \ + test `id -u` = 0 || \ + test -n "$(KBUILD_PKG_ROOTCMD)" || { \ + which fakeroot >/dev/null 2>&1 && \ + KBUILD_PKG_ROOTCMD="fakeroot -u"; \ + } || { \ + echo; \ + echo "builddeb must be run as root (or using fakeroot)."; \ + echo "KBUILD_PKG_ROOTCMD is unset and fakeroot not found."; \ + echo "Try setting KBUILD_PKG_ROOTCMD to a command to acquire"; \ + echo "root privileges (e.g., 'fakeroot -u' or 'sudo')."; \ + false; \ + } && \ + \ + $$KBUILD_PKG_ROOTCMD $(CONFIG_SHELL) \ + $(srctree)/scripts/package/builddeb + deb-pkg: FORCE $(MAKE) KBUILD_SRC= - $(KBUILD_PKG_ROOTCMD) $(CONFIG_SHELL) \ - $(srctree)/scripts/package/builddeb + $(call cmd,builddeb) clean-dirs += $(objtree)/debian/ -- GitLab From 32197c7ffb06b1319850f8fdfa1a49d32a63b79b Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Wed, 25 Nov 2009 15:14:49 +0100 Subject: [PATCH 087/618] kbuild: create include/generated in silentoldconfig The toplevel Makefile creates the directory if it runs silentoldconfig automatically, but if run manually, it fails: $ make mrproper $ make defconfig && make silentoldconfig *** Default configuration is based on 'x86_64_defconfig' # # configuration written to .config # scripts/kconfig/conf -s arch/x86/Kconfig *** Error during update of the kernel configuration. ... Move the mkdir command to the silentoldconfig target to make it work. Signed-off-by: Michal Marek --- Makefile | 1 - scripts/kconfig/Makefile | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 96b32e5bb973..aa608c2959f5 100644 --- a/Makefile +++ b/Makefile @@ -492,7 +492,6 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; # if auto.conf.cmd is missing then we are probably in a cleaned tree so # we execute the config step to be sure to catch updated Kconfig files include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd - $(Q)mkdir -p include/generated $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig else # external modules needs include/generated/autoconf.h and include/config/auto.conf diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 80599e3a7994..999e8a7d5bf7 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -27,6 +27,7 @@ oldconfig: $(obj)/conf $< -o $(Kconfig) silentoldconfig: $(obj)/conf + $(Q)mkdir -p include/generated $< -s $(Kconfig) localmodconfig: $(obj)/streamline_config.pl $(obj)/conf -- GitLab From eb8f844c0a41c4529a7d06b7801296eca9ae67aa Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 26 Nov 2009 13:34:12 +0100 Subject: [PATCH 088/618] kbuild: specify absolute paths for cscope Cscope doesn't hadle relative paths when cscope.out is not in $PWD. Use absolute paths when generating cscope.files, which seems to be the recommended way to generate cscope.out, anyway (at least according to cscope.sf.net). The speed and size differences are minimal, the only drawback is that the database needs to be regenerated if the source directory is moved. [mmarek: fixed for O= builds, modified changelog] Signed-off-by: Daniel Vetter Signed-off-by: Michal Marek --- scripts/tags.sh | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/scripts/tags.sh b/scripts/tags.sh index d52f7a01557c..1a0c44d7c4a7 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -89,7 +89,13 @@ all_defconfigs() docscope() { - (echo \-k; echo \-q; all_sources) > cscope.files + # always use absolute paths for cscope, as recommended by cscope + # upstream + case "$tree" in + /*) ;; + *) tree=$PWD/$tree ;; + esac + (cd /; echo \-k; echo \-q; all_sources) > cscope.files cscope -b -f cscope.out } -- GitLab From d8379ab1dde371f13d7fdddf05346840a82c2b61 Mon Sep 17 00:00:00 2001 From: Tony Finch Date: Fri, 27 Nov 2009 15:50:30 +0000 Subject: [PATCH 089/618] unifdef: update to upstream revision 1.190 Fix handling of input files (e.g. with no newline at EOF) that could make unifdef get into an unexpected state and call abort(). The new -B option compresses blank lines around a deleted section so that blank lines around "paragraphs" of code don't get doubled. The evaluator can now handle macros with arguments, and unbracketed arguments to the "defined" operator. Add myself to MAINTAINERS for unifdef. Signed-off-by: Tony Finch Acked-by: Sam Ravnborg Signed-off-by: Michal Marek --- MAINTAINERS | 6 + scripts/unifdef.c | 341 ++++++++++++++++++++++++++++------------------ 2 files changed, 213 insertions(+), 134 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index d58fa703ec16..94381eddccfa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5407,6 +5407,12 @@ F: drivers/uwb/* F: include/linux/uwb.h F: include/linux/uwb/ +UNIFDEF +M: Tony Finch +W: http://dotat.at/prog/unifdef +S: Maintained +F: scripts/unifdef.c + UNIFORM CDROM DRIVER M: Jens Axboe W: http://www.kernel.dk diff --git a/scripts/unifdef.c b/scripts/unifdef.c index 30d459fb0709..44d39785e50d 100644 --- a/scripts/unifdef.c +++ b/scripts/unifdef.c @@ -1,13 +1,5 @@ /* - * Copyright (c) 2002 - 2005 Tony Finch . All rights reserved. - * - * This code is derived from software contributed to Berkeley by Dave Yost. - * It was rewritten to support ANSI C by Tony Finch. The original version of - * unifdef carried the following copyright notice. None of its code remains - * in this version (though some of the names remain). - * - * Copyright (c) 1985, 1993 - * The Regents of the University of California. All rights reserved. + * Copyright (c) 2002 - 2009 Tony Finch * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -31,23 +23,20 @@ * SUCH DAMAGE. */ -#include +/* + * This code was derived from software contributed to Berkeley by Dave Yost. + * It was rewritten to support ANSI C by Tony Finch. The original version + * of unifdef carried the 4-clause BSD copyright licence. None of its code + * remains in this version (though some of the names remain) so it now + * carries a more liberal licence. + * + * The latest version is available from http://dotat.at/prog/unifdef + */ -#ifndef lint -#if 0 -static const char copyright[] = -"@(#) Copyright (c) 1985, 1993\n\ - The Regents of the University of California. All rights reserved.\n"; -#endif -#ifdef __IDSTRING -__IDSTRING(Berkeley, "@(#)unifdef.c 8.1 (Berkeley) 6/6/93"); -__IDSTRING(NetBSD, "$NetBSD: unifdef.c,v 1.8 2000/07/03 02:51:36 matt Exp $"); -__IDSTRING(dotat, "$dotat: things/unifdef.c,v 1.171 2005/03/08 12:38:48 fanf2 Exp $"); -#endif -#endif /* not lint */ -#ifdef __FBSDID -__FBSDID("$FreeBSD: /repoman/r/ncvs/src/usr.bin/unifdef/unifdef.c,v 1.20 2005/05/21 09:55:09 ru Exp $"); -#endif +static const char * const copyright[] = { + "@(#) Copyright (c) 2002 - 2009 Tony Finch \n", + "$dotat: unifdef/unifdef.c,v 1.190 2009/11/27 17:21:26 fanf2 Exp $", +}; /* * unifdef - remove ifdef'ed lines @@ -72,8 +61,6 @@ __FBSDID("$FreeBSD: /repoman/r/ncvs/src/usr.bin/unifdef/unifdef.c,v 1.20 2005/05 #include #include -size_t strlcpy(char *dst, const char *src, size_t siz); - /* types of input lines: */ typedef enum { LT_TRUEI, /* a true #if with ignore flag */ @@ -90,6 +77,7 @@ typedef enum { LT_DODGY_LAST = LT_DODGY + LT_ENDIF, LT_PLAIN, /* ordinary line */ LT_EOF, /* end of file */ + LT_ERROR, /* unevaluable #if */ LT_COUNT } Linetype; @@ -100,7 +88,7 @@ static char const * const linetype_name[] = { "DODGY IF", "DODGY TRUE", "DODGY FALSE", "DODGY ELIF", "DODGY ELTRUE", "DODGY ELFALSE", "DODGY ELSE", "DODGY ENDIF", - "PLAIN", "EOF" + "PLAIN", "EOF", "ERROR" }; /* state of #if processing */ @@ -168,11 +156,13 @@ static char const * const linestate_name[] = { * Globals. */ +static bool compblank; /* -B: compress blank lines */ +static bool lnblank; /* -b: blank deleted lines */ static bool complement; /* -c: do the complement */ static bool debugging; /* -d: debugging reports */ static bool iocccok; /* -e: fewer IOCCC errors */ +static bool strictlogic; /* -K: keep ambiguous #ifs */ static bool killconsts; /* -k: eval constant #ifs */ -static bool lnblank; /* -l: blank deleted lines */ static bool lnnum; /* -n: add #line directives */ static bool symlist; /* -s: output symbol list */ static bool text; /* -t: this is a text file */ @@ -196,7 +186,9 @@ static bool ignoring[MAXDEPTH]; /* ignore comments state */ static int stifline[MAXDEPTH]; /* start of current #if */ static int depth; /* current #if nesting */ static int delcount; /* count of deleted lines */ -static bool keepthis; /* don't delete constant #if */ +static unsigned blankcount; /* count of blank lines */ +static unsigned blankmax; /* maximum recent blankcount */ +static bool constexpr; /* constant #if expression */ static int exitstat; /* program exit status */ @@ -206,13 +198,14 @@ static void done(void); static void error(const char *); static int findsym(const char *); static void flushline(bool); -static Linetype get_line(void); +static Linetype parseline(void); static Linetype ifeval(const char **); static void ignoreoff(void); static void ignoreon(void); static void keywordedit(const char *); static void nest(void); static void process(void); +static const char *skipargs(const char *); static const char *skipcomment(const char *); static const char *skipsym(const char *); static void state(Ifstate); @@ -220,7 +213,7 @@ static int strlcmp(const char *, const char *, size_t); static void unnest(void); static void usage(void); -#define endsym(c) (!isalpha((unsigned char)c) && !isdigit((unsigned char)c) && c != '_') +#define endsym(c) (!isalnum((unsigned char)c) && c != '_') /* * The main program. @@ -230,7 +223,7 @@ main(int argc, char *argv[]) { int opt; - while ((opt = getopt(argc, argv, "i:D:U:I:cdeklnst")) != -1) + while ((opt = getopt(argc, argv, "i:D:U:I:BbcdeKklnst")) != -1) switch (opt) { case 'i': /* treat stuff controlled by these symbols as text */ /* @@ -255,6 +248,13 @@ main(int argc, char *argv[]) case 'I': /* no-op for compatibility with cpp */ break; + case 'B': /* compress blank lines around removed section */ + compblank = true; + break; + case 'b': /* blank deleted lines instead of omitting them */ + case 'l': /* backwards compatibility */ + lnblank = true; + break; case 'c': /* treat -D as -U and vice versa */ complement = true; break; @@ -264,12 +264,12 @@ main(int argc, char *argv[]) case 'e': /* fewer errors from dodgy lines */ iocccok = true; break; + case 'K': /* keep ambiguous #ifs */ + strictlogic = true; + break; case 'k': /* process constant #ifs */ killconsts = true; break; - case 'l': /* blank deleted lines instead of omitting them */ - lnblank = true; - break; case 'n': /* add #line directive after deleted lines */ lnnum = true; break; @@ -284,6 +284,8 @@ main(int argc, char *argv[]) } argc -= optind; argv += optind; + if (compblank && lnblank) + errx(2, "-B and -b are mutually exclusive"); if (argc > 1) { errx(2, "can only do one file"); } else if (argc == 1 && strcmp(*argv, "-") != 0) { @@ -302,7 +304,7 @@ main(int argc, char *argv[]) static void usage(void) { - fprintf(stderr, "usage: unifdef [-cdeklnst] [-Ipath]" + fprintf(stderr, "usage: unifdef [-BbcdeKknst] [-Ipath]" " [-Dsym[=val]] [-Usym] [-iDsym[=val]] [-iUsym] ... [file]\n"); exit(2); } @@ -383,46 +385,46 @@ static state_fn * const trans_table[IS_COUNT][LT_COUNT] = { /* IS_OUTSIDE */ { Itrue, Ifalse,Fpass, Ftrue, Ffalse,Eelif, Eelif, Eelif, Eelse, Eendif, Oiffy, Oiffy, Fpass, Oif, Oif, Eelif, Eelif, Eelif, Eelse, Eendif, - print, done }, + print, done, abort }, /* IS_FALSE_PREFIX */ { Idrop, Idrop, Fdrop, Fdrop, Fdrop, Mpass, Strue, Sfalse,Selse, Dendif, Idrop, Idrop, Fdrop, Fdrop, Fdrop, Mpass, Eioccc,Eioccc,Eioccc,Eioccc, - drop, Eeof }, + drop, Eeof, abort }, /* IS_TRUE_PREFIX */ { Itrue, Ifalse,Fpass, Ftrue, Ffalse,Dfalse,Dfalse,Dfalse,Delse, Dendif, Oiffy, Oiffy, Fpass, Oif, Oif, Eioccc,Eioccc,Eioccc,Eioccc,Eioccc, - print, Eeof }, + print, Eeof, abort }, /* IS_PASS_MIDDLE */ { Itrue, Ifalse,Fpass, Ftrue, Ffalse,Pelif, Mtrue, Delif, Pelse, Pendif, Oiffy, Oiffy, Fpass, Oif, Oif, Pelif, Oelif, Oelif, Pelse, Pendif, - print, Eeof }, + print, Eeof, abort }, /* IS_FALSE_MIDDLE */ { Idrop, Idrop, Fdrop, Fdrop, Fdrop, Pelif, Mtrue, Delif, Pelse, Pendif, Idrop, Idrop, Fdrop, Fdrop, Fdrop, Eioccc,Eioccc,Eioccc,Eioccc,Eioccc, - drop, Eeof }, + drop, Eeof, abort }, /* IS_TRUE_MIDDLE */ { Itrue, Ifalse,Fpass, Ftrue, Ffalse,Melif, Melif, Melif, Melse, Pendif, Oiffy, Oiffy, Fpass, Oif, Oif, Eioccc,Eioccc,Eioccc,Eioccc,Pendif, - print, Eeof }, + print, Eeof, abort }, /* IS_PASS_ELSE */ { Itrue, Ifalse,Fpass, Ftrue, Ffalse,Eelif, Eelif, Eelif, Eelse, Pendif, Oiffy, Oiffy, Fpass, Oif, Oif, Eelif, Eelif, Eelif, Eelse, Pendif, - print, Eeof }, + print, Eeof, abort }, /* IS_FALSE_ELSE */ { Idrop, Idrop, Fdrop, Fdrop, Fdrop, Eelif, Eelif, Eelif, Eelse, Dendif, Idrop, Idrop, Fdrop, Fdrop, Fdrop, Eelif, Eelif, Eelif, Eelse, Eioccc, - drop, Eeof }, + drop, Eeof, abort }, /* IS_TRUE_ELSE */ { Itrue, Ifalse,Fpass, Ftrue, Ffalse,Eelif, Eelif, Eelif, Eelse, Dendif, Oiffy, Oiffy, Fpass, Oif, Oif, Eelif, Eelif, Eelif, Eelse, Eioccc, - print, Eeof }, + print, Eeof, abort }, /* IS_FALSE_TRAILER */ { Idrop, Idrop, Fdrop, Fdrop, Fdrop, Dfalse,Dfalse,Dfalse,Delse, Dendif, Idrop, Idrop, Fdrop, Fdrop, Fdrop, Dfalse,Dfalse,Dfalse,Delse, Eioccc, - drop, Eeof } + drop, Eeof, abort } /*TRUEI FALSEI IF TRUE FALSE ELIF ELTRUE ELFALSE ELSE ENDIF TRUEI FALSEI IF TRUE FALSE ELIF ELTRUE ELFALSE ELSE ENDIF (DODGY) - PLAIN EOF */ + PLAIN EOF ERROR */ }; /* @@ -463,9 +465,11 @@ keywordedit(const char *replacement) static void nest(void) { - depth += 1; - if (depth >= MAXDEPTH) + if (depth > MAXDEPTH-1) + abort(); /* bug */ + if (depth == MAXDEPTH-1) error("Too many levels of nesting"); + depth += 1; stifline[depth] = linenum; } static void @@ -490,15 +494,23 @@ flushline(bool keep) if (symlist) return; if (keep ^ complement) { - if (lnnum && delcount > 0) - printf("#line %d\n", linenum); - fputs(tline, stdout); - delcount = 0; + bool blankline = tline[strspn(tline, " \t\n")] == '\0'; + if (blankline && compblank && blankcount != blankmax) { + delcount += 1; + blankcount += 1; + } else { + if (lnnum && delcount > 0) + printf("#line %d\n", linenum); + fputs(tline, stdout); + delcount = 0; + blankmax = blankcount = blankline ? blankcount + 1 : 0; + } } else { if (lnblank) putc('\n', stdout); exitstat = 1; delcount += 1; + blankcount = 0; } } @@ -510,9 +522,12 @@ process(void) { Linetype lineval; + /* When compressing blank lines, act as if the file + is preceded by a large number of blank lines. */ + blankmax = blankcount = 1000; for (;;) { linenum++; - lineval = get_line(); + lineval = parseline(); trans_table[ifstate[depth]][lineval](); debug("process %s -> %s depth %d", linetype_name[lineval], @@ -526,7 +541,7 @@ process(void) * help from skipcomment(). */ static Linetype -get_line(void) +parseline(void) { const char *cp; int cursym; @@ -595,9 +610,21 @@ get_line(void) if (incomment) linestate = LS_DIRTY; } - /* skipcomment should have changed the state */ - if (linestate == LS_HASH) - abort(); /* bug */ + /* skipcomment normally changes the state, except + if the last line of the file lacks a newline, or + if there is too much whitespace in a directive */ + if (linestate == LS_HASH) { + size_t len = cp - tline; + if (fgets(tline + len, MAXLINE - len, input) == NULL) { + /* append the missing newline */ + tline[len+0] = '\n'; + tline[len+1] = '\0'; + cp++; + linestate = LS_START; + } else { + linestate = LS_DIRTY; + } + } } if (linestate == LS_DIRTY) { while (*cp != '\0') @@ -610,17 +637,40 @@ get_line(void) /* * These are the binary operators that are supported by the expression - * evaluator. Note that if support for division is added then we also - * need short-circuiting booleans because of divide-by-zero. + * evaluator. */ -static int op_lt(int a, int b) { return (a < b); } -static int op_gt(int a, int b) { return (a > b); } -static int op_le(int a, int b) { return (a <= b); } -static int op_ge(int a, int b) { return (a >= b); } -static int op_eq(int a, int b) { return (a == b); } -static int op_ne(int a, int b) { return (a != b); } -static int op_or(int a, int b) { return (a || b); } -static int op_and(int a, int b) { return (a && b); } +static Linetype op_strict(int *p, int v, Linetype at, Linetype bt) { + if(at == LT_IF || bt == LT_IF) return (LT_IF); + return (*p = v, v ? LT_TRUE : LT_FALSE); +} +static Linetype op_lt(int *p, Linetype at, int a, Linetype bt, int b) { + return op_strict(p, a < b, at, bt); +} +static Linetype op_gt(int *p, Linetype at, int a, Linetype bt, int b) { + return op_strict(p, a > b, at, bt); +} +static Linetype op_le(int *p, Linetype at, int a, Linetype bt, int b) { + return op_strict(p, a <= b, at, bt); +} +static Linetype op_ge(int *p, Linetype at, int a, Linetype bt, int b) { + return op_strict(p, a >= b, at, bt); +} +static Linetype op_eq(int *p, Linetype at, int a, Linetype bt, int b) { + return op_strict(p, a == b, at, bt); +} +static Linetype op_ne(int *p, Linetype at, int a, Linetype bt, int b) { + return op_strict(p, a != b, at, bt); +} +static Linetype op_or(int *p, Linetype at, int a, Linetype bt, int b) { + if (!strictlogic && (at == LT_TRUE || bt == LT_TRUE)) + return (*p = 1, LT_TRUE); + return op_strict(p, a || b, at, bt); +} +static Linetype op_and(int *p, Linetype at, int a, Linetype bt, int b) { + if (!strictlogic && (at == LT_FALSE || bt == LT_FALSE)) + return (*p = 0, LT_FALSE); + return op_strict(p, a && b, at, bt); +} /* * An evaluation function takes three arguments, as follows: (1) a pointer to @@ -629,8 +679,8 @@ static int op_and(int a, int b) { return (a && b); } * value of the expression; and (3) a pointer to a char* that points to the * expression to be evaluated and that is updated to the end of the expression * when evaluation is complete. The function returns LT_FALSE if the value of - * the expression is zero, LT_TRUE if it is non-zero, or LT_IF if the - * expression could not be evaluated. + * the expression is zero, LT_TRUE if it is non-zero, LT_IF if the expression + * depends on an unknown symbol, or LT_ERROR if there is a parse failure. */ struct ops; @@ -649,7 +699,7 @@ static const struct ops { eval_fn *inner; struct op { const char *str; - int (*fn)(int, int); + Linetype (*fn)(int *, Linetype, int, Linetype, int); } op[5]; } eval_ops[] = { { eval_table, { { "||", op_or } } }, @@ -664,8 +714,8 @@ static const struct ops { /* * Function for evaluating the innermost parts of expressions, - * viz. !expr (expr) defined(symbol) symbol number - * We reset the keepthis flag when we find a non-constant subexpression. + * viz. !expr (expr) number defined(symbol) symbol + * We reset the constexpr flag in the last two cases. */ static Linetype eval_unary(const struct ops *ops, int *valp, const char **cpp) @@ -673,68 +723,83 @@ eval_unary(const struct ops *ops, int *valp, const char **cpp) const char *cp; char *ep; int sym; + bool defparen; + Linetype lt; cp = skipcomment(*cpp); if (*cp == '!') { debug("eval%d !", ops - eval_ops); cp++; - if (eval_unary(ops, valp, &cp) == LT_IF) { - *cpp = cp; - return (LT_IF); + lt = eval_unary(ops, valp, &cp); + if (lt == LT_ERROR) + return (LT_ERROR); + if (lt != LT_IF) { + *valp = !*valp; + lt = *valp ? LT_TRUE : LT_FALSE; } - *valp = !*valp; } else if (*cp == '(') { cp++; debug("eval%d (", ops - eval_ops); - if (eval_table(eval_ops, valp, &cp) == LT_IF) - return (LT_IF); + lt = eval_table(eval_ops, valp, &cp); + if (lt == LT_ERROR) + return (LT_ERROR); cp = skipcomment(cp); if (*cp++ != ')') - return (LT_IF); + return (LT_ERROR); } else if (isdigit((unsigned char)*cp)) { debug("eval%d number", ops - eval_ops); *valp = strtol(cp, &ep, 0); + if (ep == cp) + return (LT_ERROR); + lt = *valp ? LT_TRUE : LT_FALSE; cp = skipsym(cp); } else if (strncmp(cp, "defined", 7) == 0 && endsym(cp[7])) { cp = skipcomment(cp+7); debug("eval%d defined", ops - eval_ops); - if (*cp++ != '(') - return (LT_IF); - cp = skipcomment(cp); + if (*cp == '(') { + cp = skipcomment(cp+1); + defparen = true; + } else { + defparen = false; + } sym = findsym(cp); - cp = skipsym(cp); - cp = skipcomment(cp); - if (*cp++ != ')') - return (LT_IF); - if (sym >= 0) + if (sym < 0) { + lt = LT_IF; + } else { *valp = (value[sym] != NULL); - else { - *cpp = cp; - return (LT_IF); + lt = *valp ? LT_TRUE : LT_FALSE; } - keepthis = false; + cp = skipsym(cp); + cp = skipcomment(cp); + if (defparen && *cp++ != ')') + return (LT_ERROR); + constexpr = false; } else if (!endsym(*cp)) { debug("eval%d symbol", ops - eval_ops); sym = findsym(cp); - if (sym < 0) - return (LT_IF); - if (value[sym] == NULL) + cp = skipsym(cp); + if (sym < 0) { + lt = LT_IF; + cp = skipargs(cp); + } else if (value[sym] == NULL) { *valp = 0; - else { + lt = LT_FALSE; + } else { *valp = strtol(value[sym], &ep, 0); if (*ep != '\0' || ep == value[sym]) - return (LT_IF); + return (LT_ERROR); + lt = *valp ? LT_TRUE : LT_FALSE; + cp = skipargs(cp); } - cp = skipsym(cp); - keepthis = false; + constexpr = false; } else { debug("eval%d bad expr", ops - eval_ops); - return (LT_IF); + return (LT_ERROR); } *cpp = cp; debug("eval%d = %d", ops - eval_ops, *valp); - return (*valp ? LT_TRUE : LT_FALSE); + return (lt); } /* @@ -746,11 +811,13 @@ eval_table(const struct ops *ops, int *valp, const char **cpp) const struct op *op; const char *cp; int val; - Linetype lhs, rhs; + Linetype lt, rt; debug("eval%d", ops - eval_ops); cp = *cpp; - lhs = ops->inner(ops+1, valp, &cp); + lt = ops->inner(ops+1, valp, &cp); + if (lt == LT_ERROR) + return (LT_ERROR); for (;;) { cp = skipcomment(cp); for (op = ops->op; op->str != NULL; op++) @@ -760,32 +827,16 @@ eval_table(const struct ops *ops, int *valp, const char **cpp) break; cp += strlen(op->str); debug("eval%d %s", ops - eval_ops, op->str); - rhs = ops->inner(ops+1, &val, &cp); - if (op->fn == op_and && (lhs == LT_FALSE || rhs == LT_FALSE)) { - debug("eval%d: and always false", ops - eval_ops); - if (lhs == LT_IF) - *valp = val; - lhs = LT_FALSE; - continue; - } - if (op->fn == op_or && (lhs == LT_TRUE || rhs == LT_TRUE)) { - debug("eval%d: or always true", ops - eval_ops); - if (lhs == LT_IF) - *valp = val; - lhs = LT_TRUE; - continue; - } - if (rhs == LT_IF) - lhs = LT_IF; - if (lhs != LT_IF) - *valp = op->fn(*valp, val); + rt = ops->inner(ops+1, &val, &cp); + if (rt == LT_ERROR) + return (LT_ERROR); + lt = op->fn(valp, lt, *valp, rt, val); } *cpp = cp; debug("eval%d = %d", ops - eval_ops, *valp); - if (lhs != LT_IF) - lhs = (*valp ? LT_TRUE : LT_FALSE); - return lhs; + debug("eval%d lt = %s", ops - eval_ops, linetype_name[lt]); + return (lt); } /* @@ -796,17 +847,14 @@ eval_table(const struct ops *ops, int *valp, const char **cpp) static Linetype ifeval(const char **cpp) { - const char *cp = *cpp; int ret; - int val; + int val = 0; debug("eval %s", *cpp); - keepthis = killconsts ? false : true; - ret = eval_table(eval_ops, &val, &cp); - if (ret != LT_IF) - *cpp = cp; + constexpr = killconsts ? false : true; + ret = eval_table(eval_ops, &val, cpp); debug("eval = %d", val); - return (keepthis ? LT_IF : ret); + return (constexpr ? LT_IF : ret == LT_ERROR ? LT_IF : ret); } /* @@ -917,6 +965,31 @@ skipcomment(const char *cp) return (cp); } +/* + * Skip macro arguments. + */ +static const char * +skipargs(const char *cp) +{ + const char *ocp = cp; + int level = 0; + cp = skipcomment(cp); + if (*cp != '(') + return (cp); + do { + if (*cp == '(') + level++; + if (*cp == ')') + level--; + cp = skipcomment(cp+1); + } while (level != 0 && *cp != '\0'); + if (level == 0) + return (cp); + else + /* Rewind and re-detect the syntax error later. */ + return (ocp); +} + /* * Skip over an identifier. */ @@ -929,7 +1002,7 @@ skipsym(const char *cp) } /* - * Look for the symbol in the symbol table. If is is found, we return + * Look for the symbol in the symbol table. If it is found, we return * the symbol table index, else we return -1. */ static int -- GitLab From 75f0d92b6a11736429940bdd58f9c141abee8865 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Fri, 4 Dec 2009 20:46:17 +0000 Subject: [PATCH 090/618] score: add asm/asm-offsets.h wrapper A recent kbuild patch moved asm-offsets.h to include/generated. Provide a wrapper header as for other architectures. Signed-off-by: Michal Marek --- arch/score/include/asm/asm-offsets.h | 1 + 1 file changed, 1 insertion(+) create mode 100644 arch/score/include/asm/asm-offsets.h diff --git a/arch/score/include/asm/asm-offsets.h b/arch/score/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/score/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include -- GitLab From 6299fee7b84ac7b4429b4e2787b99470a89cd5f5 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sat, 5 Dec 2009 20:20:50 +0000 Subject: [PATCH 091/618] genksyms: properly consider EXPORT_UNUSED_SYMBOL{,_GPL}() Despite being unused these should also get a CRC calculated. Primarily I view this as a consistency thing. But I also think this is one of the reasons why __crc_* need to be weak (which I think should be avoided, and hence we should have the goal to eliminate this so that failure to calculate a proper CRC for a symbol causes the build to fail). Signed-off-by: Jan Beulich Cc: Anibal Monsalve Salazar Cc: Steven Rostedt Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Michal Marek --- scripts/genksyms/keywords.c_shipped | 191 ++++++++++++++-------------- scripts/genksyms/keywords.gperf | 2 + 2 files changed, 99 insertions(+), 94 deletions(-) diff --git a/scripts/genksyms/keywords.c_shipped b/scripts/genksyms/keywords.c_shipped index 287467a2e8c7..8060e06798b3 100644 --- a/scripts/genksyms/keywords.c_shipped +++ b/scripts/genksyms/keywords.c_shipped @@ -1,4 +1,4 @@ -/* ANSI-C code produced by gperf version 3.0.3 */ +/* ANSI-C code produced by gperf version 3.0.4 */ /* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf */ #if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \ @@ -34,7 +34,7 @@ struct resword; static const struct resword *is_reserved_word(register const char *str, register unsigned int len); #line 5 "scripts/genksyms/keywords.gperf" struct resword { const char *name; int token; }; -/* maximum key range = 62, duplicates = 0 */ +/* maximum key range = 64, duplicates = 0 */ #ifdef __GNUC__ __inline @@ -48,39 +48,39 @@ is_reserved_hash (register const char *str, register unsigned int len) { static const unsigned char asso_values[] = { - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 5, - 65, 65, 65, 65, 65, 65, 35, 65, 65, 65, - 0, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 0, 65, 0, 65, 5, - 20, 15, 10, 30, 65, 15, 65, 65, 20, 0, - 10, 35, 20, 65, 10, 5, 0, 10, 5, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65 + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 0, + 67, 67, 67, 67, 67, 67, 15, 67, 67, 67, + 0, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 0, 67, 0, 67, 5, + 25, 20, 15, 30, 67, 15, 67, 67, 10, 0, + 10, 40, 20, 67, 10, 5, 0, 10, 15, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67 }; return len + asso_values[(unsigned char)str[2]] + asso_values[(unsigned char)str[0]] + asso_values[(unsigned char)str[len - 1]]; } #ifdef __GNUC__ __inline -#ifdef __GNUC_STDC_INLINE__ +#if defined __GNUC_STDC_INLINE__ || defined __GNUC_GNU_INLINE__ __attribute__ ((__gnu_inline__)) #endif #endif @@ -89,116 +89,119 @@ is_reserved_word (register const char *str, register unsigned int len) { enum { - TOTAL_KEYWORDS = 43, + TOTAL_KEYWORDS = 45, MIN_WORD_LENGTH = 3, MAX_WORD_LENGTH = 24, MIN_HASH_VALUE = 3, - MAX_HASH_VALUE = 64 + MAX_HASH_VALUE = 66 }; static const struct resword wordlist[] = { {""}, {""}, {""}, -#line 28 "scripts/genksyms/keywords.gperf" +#line 30 "scripts/genksyms/keywords.gperf" {"asm", ASM_KEYW}, {""}, -#line 10 "scripts/genksyms/keywords.gperf" +#line 12 "scripts/genksyms/keywords.gperf" {"__asm", ASM_KEYW}, {""}, -#line 11 "scripts/genksyms/keywords.gperf" +#line 13 "scripts/genksyms/keywords.gperf" {"__asm__", ASM_KEYW}, {""}, {""}, -#line 54 "scripts/genksyms/keywords.gperf" +#line 56 "scripts/genksyms/keywords.gperf" {"__typeof__", TYPEOF_KEYW}, {""}, -#line 14 "scripts/genksyms/keywords.gperf" +#line 16 "scripts/genksyms/keywords.gperf" {"__const", CONST_KEYW}, -#line 13 "scripts/genksyms/keywords.gperf" - {"__attribute__", ATTRIBUTE_KEYW}, #line 15 "scripts/genksyms/keywords.gperf" + {"__attribute__", ATTRIBUTE_KEYW}, +#line 17 "scripts/genksyms/keywords.gperf" {"__const__", CONST_KEYW}, -#line 20 "scripts/genksyms/keywords.gperf" +#line 22 "scripts/genksyms/keywords.gperf" {"__signed__", SIGNED_KEYW}, -#line 46 "scripts/genksyms/keywords.gperf" +#line 48 "scripts/genksyms/keywords.gperf" {"static", STATIC_KEYW}, -#line 22 "scripts/genksyms/keywords.gperf" - {"__volatile__", VOLATILE_KEYW}, -#line 41 "scripts/genksyms/keywords.gperf" + {""}, +#line 43 "scripts/genksyms/keywords.gperf" {"int", INT_KEYW}, -#line 34 "scripts/genksyms/keywords.gperf" +#line 36 "scripts/genksyms/keywords.gperf" {"char", CHAR_KEYW}, -#line 35 "scripts/genksyms/keywords.gperf" +#line 37 "scripts/genksyms/keywords.gperf" {"const", CONST_KEYW}, -#line 47 "scripts/genksyms/keywords.gperf" +#line 49 "scripts/genksyms/keywords.gperf" {"struct", STRUCT_KEYW}, -#line 26 "scripts/genksyms/keywords.gperf" +#line 28 "scripts/genksyms/keywords.gperf" {"__restrict__", RESTRICT_KEYW}, -#line 27 "scripts/genksyms/keywords.gperf" +#line 29 "scripts/genksyms/keywords.gperf" {"restrict", RESTRICT_KEYW}, -#line 25 "scripts/genksyms/keywords.gperf" - {"_restrict", RESTRICT_KEYW}, -#line 18 "scripts/genksyms/keywords.gperf" +#line 9 "scripts/genksyms/keywords.gperf" + {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW}, +#line 20 "scripts/genksyms/keywords.gperf" {"__inline__", INLINE_KEYW}, -#line 12 "scripts/genksyms/keywords.gperf" - {"__attribute", ATTRIBUTE_KEYW}, {""}, -#line 16 "scripts/genksyms/keywords.gperf" +#line 24 "scripts/genksyms/keywords.gperf" + {"__volatile__", VOLATILE_KEYW}, +#line 7 "scripts/genksyms/keywords.gperf" + {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW}, +#line 27 "scripts/genksyms/keywords.gperf" + {"_restrict", RESTRICT_KEYW}, + {""}, +#line 14 "scripts/genksyms/keywords.gperf" + {"__attribute", ATTRIBUTE_KEYW}, +#line 8 "scripts/genksyms/keywords.gperf" + {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, +#line 18 "scripts/genksyms/keywords.gperf" {"__extension__", EXTENSION_KEYW}, -#line 37 "scripts/genksyms/keywords.gperf" +#line 39 "scripts/genksyms/keywords.gperf" {"enum", ENUM_KEYW}, -#line 21 "scripts/genksyms/keywords.gperf" - {"__volatile", VOLATILE_KEYW}, -#line 38 "scripts/genksyms/keywords.gperf" +#line 10 "scripts/genksyms/keywords.gperf" + {"EXPORT_UNUSED_SYMBOL", EXPORT_SYMBOL_KEYW}, +#line 40 "scripts/genksyms/keywords.gperf" {"extern", EXTERN_KEYW}, {""}, -#line 19 "scripts/genksyms/keywords.gperf" +#line 21 "scripts/genksyms/keywords.gperf" {"__signed", SIGNED_KEYW}, -#line 9 "scripts/genksyms/keywords.gperf" - {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW}, - {""}, -#line 53 "scripts/genksyms/keywords.gperf" +#line 11 "scripts/genksyms/keywords.gperf" + {"EXPORT_UNUSED_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, +#line 51 "scripts/genksyms/keywords.gperf" + {"union", UNION_KEYW}, +#line 55 "scripts/genksyms/keywords.gperf" {"typeof", TYPEOF_KEYW}, -#line 48 "scripts/genksyms/keywords.gperf" +#line 50 "scripts/genksyms/keywords.gperf" {"typedef", TYPEDEF_KEYW}, -#line 17 "scripts/genksyms/keywords.gperf" +#line 19 "scripts/genksyms/keywords.gperf" {"__inline", INLINE_KEYW}, -#line 33 "scripts/genksyms/keywords.gperf" +#line 35 "scripts/genksyms/keywords.gperf" {"auto", AUTO_KEYW}, -#line 49 "scripts/genksyms/keywords.gperf" - {"union", UNION_KEYW}, - {""}, {""}, -#line 50 "scripts/genksyms/keywords.gperf" - {"unsigned", UNSIGNED_KEYW}, -#line 51 "scripts/genksyms/keywords.gperf" - {"void", VOID_KEYW}, -#line 44 "scripts/genksyms/keywords.gperf" - {"short", SHORT_KEYW}, +#line 23 "scripts/genksyms/keywords.gperf" + {"__volatile", VOLATILE_KEYW}, {""}, {""}, #line 52 "scripts/genksyms/keywords.gperf" - {"volatile", VOLATILE_KEYW}, - {""}, -#line 39 "scripts/genksyms/keywords.gperf" - {"float", FLOAT_KEYW}, -#line 36 "scripts/genksyms/keywords.gperf" - {"double", DOUBLE_KEYW}, + {"unsigned", UNSIGNED_KEYW}, {""}, -#line 7 "scripts/genksyms/keywords.gperf" - {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW}, - {""}, {""}, -#line 40 "scripts/genksyms/keywords.gperf" +#line 46 "scripts/genksyms/keywords.gperf" + {"short", SHORT_KEYW}, +#line 42 "scripts/genksyms/keywords.gperf" {"inline", INLINE_KEYW}, -#line 8 "scripts/genksyms/keywords.gperf" - {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, -#line 43 "scripts/genksyms/keywords.gperf" - {"register", REGISTER_KEYW}, {""}, -#line 24 "scripts/genksyms/keywords.gperf" +#line 54 "scripts/genksyms/keywords.gperf" + {"volatile", VOLATILE_KEYW}, +#line 44 "scripts/genksyms/keywords.gperf" + {"long", LONG_KEYW}, +#line 26 "scripts/genksyms/keywords.gperf" {"_Bool", BOOL_KEYW}, -#line 45 "scripts/genksyms/keywords.gperf" - {"signed", SIGNED_KEYW}, {""}, {""}, -#line 42 "scripts/genksyms/keywords.gperf" - {"long", LONG_KEYW} +#line 45 "scripts/genksyms/keywords.gperf" + {"register", REGISTER_KEYW}, +#line 53 "scripts/genksyms/keywords.gperf" + {"void", VOID_KEYW}, +#line 41 "scripts/genksyms/keywords.gperf" + {"float", FLOAT_KEYW}, +#line 38 "scripts/genksyms/keywords.gperf" + {"double", DOUBLE_KEYW}, + {""}, {""}, {""}, {""}, +#line 47 "scripts/genksyms/keywords.gperf" + {"signed", SIGNED_KEYW} }; if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH) diff --git a/scripts/genksyms/keywords.gperf b/scripts/genksyms/keywords.gperf index 8fe977a4d57b..e6349acb6f2f 100644 --- a/scripts/genksyms/keywords.gperf +++ b/scripts/genksyms/keywords.gperf @@ -7,6 +7,8 @@ struct resword { const char *name; int token; } EXPORT_SYMBOL, EXPORT_SYMBOL_KEYW EXPORT_SYMBOL_GPL, EXPORT_SYMBOL_KEYW EXPORT_SYMBOL_GPL_FUTURE, EXPORT_SYMBOL_KEYW +EXPORT_UNUSED_SYMBOL, EXPORT_SYMBOL_KEYW +EXPORT_UNUSED_SYMBOL_GPL, EXPORT_SYMBOL_KEYW __asm, ASM_KEYW __asm__, ASM_KEYW __attribute, ATTRIBUTE_KEYW -- GitLab From bc081dd6e9f622c73334dc465359168543ccaabf Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Mon, 7 Dec 2009 16:38:33 +0100 Subject: [PATCH 092/618] kbuild: generate modules.builtin To make it easier for module-init-tools and scripts like mkinitrd to distinguish builtin and missing modules, install a modules.builtin file listing all builtin modules. This is done by generating an additional config file (tristate.conf) with tristate options set to uppercase 'Y' or 'M'. If we source that config file, the builtin modules appear in obj-Y. Signed-off-by: Michal Marek --- .gitignore | 1 + Documentation/kbuild/kbuild.txt | 14 ++++++++ Documentation/kbuild/kconfig.txt | 5 +++ Makefile | 14 +++++--- scripts/Kbuild.include | 6 ++++ scripts/Makefile.modbuiltin | 55 ++++++++++++++++++++++++++++++++ scripts/kconfig/confdata.c | 22 ++++++++++++- 7 files changed, 112 insertions(+), 5 deletions(-) create mode 100644 scripts/Makefile.modbuiltin diff --git a/.gitignore b/.gitignore index 002d5304968b..fb2190c61af0 100644 --- a/.gitignore +++ b/.gitignore @@ -22,6 +22,7 @@ *.lst *.symtypes *.order +modules.builtin *.elf *.bin *.gz diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index bb3bf38f03da..6f8c1cabbc5d 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -1,3 +1,17 @@ +Output files + +modules.order +-------------------------------------------------- +This file records the order in which modules appear in Makefiles. This +is used by modprobe to deterministically resolve aliases that match +multiple modules. + +modules.builtin +-------------------------------------------------- +This file lists all modules that are built into the kernel. This is used +by modprobe to not fail when trying to load something builtin. + + Environment variables KCPPFLAGS diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index ab8dc3538988..49efae703979 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -103,6 +103,11 @@ KCONFIG_AUTOCONFIG This environment variable can be set to specify the path & name of the "auto.conf" file. Its default value is "include/config/auto.conf". +KCONFIG_TRISTATE +-------------------------------------------------- +This environment variable can be set to specify the path & name of the +"tristate.conf" file. Its default value is "include/config/tristate.conf". + KCONFIG_AUTOHEADER -------------------------------------------------- This environment variable can be set to specify the path & name of the diff --git a/Makefile b/Makefile index aa608c2959f5..391fcb396324 100644 --- a/Makefile +++ b/Makefile @@ -464,7 +464,7 @@ ifeq ($(KBUILD_EXTMOD),) # Carefully list dependencies so we do not try to build scripts twice # in parallel PHONY += scripts -scripts: scripts_basic include/config/auto.conf +scripts: scripts_basic include/config/auto.conf include/config/tristate.conf $(Q)$(MAKE) $(build)=$(@) # Objects we will link into vmlinux / subdirs we need to visit @@ -491,7 +491,7 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; # with it and forgot to run make oldconfig. # if auto.conf.cmd is missing then we are probably in a cleaned tree so # we execute the config step to be sure to catch updated Kconfig files -include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd +include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig else # external modules needs include/generated/autoconf.h and include/config/auto.conf @@ -876,6 +876,9 @@ $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ; PHONY += $(vmlinux-dirs) $(vmlinux-dirs): prepare scripts $(Q)$(MAKE) $(build)=$@ +ifdef CONFIG_MODULES + $(Q)$(MAKE) $(modbuiltin)=$@ +endif # Build the kernel release string # @@ -1080,6 +1083,7 @@ all: modules PHONY += modules modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order + $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.builtin) > $(objtree)/modules.builtin @$(kecho) ' Building modules, stage 2.'; $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild @@ -1109,6 +1113,7 @@ _modinst_: ln -s $(objtree) $(MODLIB)/build ; \ fi @cp -f $(objtree)/modules.order $(MODLIB)/ + @cp -f $(objtree)/modules.builtin $(MODLIB)/ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst # This depmod is only for convenience to give the initial @@ -1169,7 +1174,7 @@ clean: archclean $(clean-dirs) \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' -o -name 'modules.order' \ - -o -name '.tmp_*.o.*' \ + -o modules.order -o -name '.tmp_*.o.*' \ -o -name '*.gcno' \) -type f -print | xargs rm -f # mrproper - Delete all generated files, including .config @@ -1367,7 +1372,8 @@ $(clean-dirs): clean: rm-dirs := $(MODVERDIR) clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \ - $(KBUILD_EXTMOD)/modules.order + $(KBUILD_EXTMOD)/modules.order \ + $(KBUILD_EXTMOD)/modules.builtin clean: $(clean-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index c67e73ecd5be..ed2773edfe71 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -149,6 +149,12 @@ ld-option = $(call try-run,\ # $(Q)$(MAKE) $(build)=dir build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj +### +# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj= +# Usage: +# $(Q)$(MAKE) $(modbuiltin)=dir +modbuiltin := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.modbuiltin obj + # Prefix -I with $(srctree) if it is not an absolute path. # skip if -I has no parameter addtree = $(if $(patsubst -I%,%,$(1)), \ diff --git a/scripts/Makefile.modbuiltin b/scripts/Makefile.modbuiltin new file mode 100644 index 000000000000..102a276f6eea --- /dev/null +++ b/scripts/Makefile.modbuiltin @@ -0,0 +1,55 @@ +# ========================================================================== +# Generating modules.builtin +# ========================================================================== + +src := $(obj) + +PHONY := __modbuiltin +__modbuiltin: + +-include include/config/auto.conf +# tristate.conf sets tristate variables to uppercase 'Y' or 'M' +# That way, we get the list of built-in modules in obj-Y +-include include/config/tristate.conf + +include scripts/Kbuild.include + +# The filename Kbuild has precedence over Makefile +kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) +kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile) +include $(kbuild-file) + +include scripts/Makefile.lib +__subdir-Y := $(patsubst %/,%,$(filter %/, $(obj-Y))) +subdir-Y += $(__subdir-Y) +subdir-ym := $(sort $(subdir-y) $(subdir-Y) $(subdir-m)) +subdir-ym := $(addprefix $(obj)/,$(subdir-ym)) +obj-Y := $(addprefix $(obj)/,$(obj-Y)) + +modbuiltin-subdirs := $(patsubst %,%/modules.builtin, $(subdir-ym)) +modbuiltin-mods := $(filter %.ko, $(obj-Y:.o=.ko)) +modbuiltin-target := $(obj)/modules.builtin + +__modbuiltin: $(modbuiltin-target) $(subdir-ym) + @: + +$(modbuiltin-target): $(subdir-ym) FORCE + $(Q)(for m in $(modbuiltin-mods); do echo kernel/$$m; done; \ + cat /dev/null $(modbuiltin-subdirs)) > $@ + +PHONY += FORCE + +FORCE: + +# Descending +# --------------------------------------------------------------------------- + +PHONY += $(subdir-ym) +$(subdir-ym): + $(Q)$(MAKE) $(modbuiltin)=$@ + + +# Declare the contents of the .PHONY variable as phony. We keep that +# information in a variable se we can use it in if_changed and friends. + +.PHONY: $(PHONY) diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 797a7410f690..c4dec80cfd8e 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -677,7 +677,7 @@ int conf_write_autoconf(void) struct symbol *sym; const char *str; const char *name; - FILE *out, *out_h; + FILE *out, *tristate, *out_h; time_t now; int i, l; @@ -692,9 +692,16 @@ int conf_write_autoconf(void) if (!out) return 1; + tristate = fopen(".tmpconfig_tristate", "w"); + if (!tristate) { + fclose(out); + return 1; + } + out_h = fopen(".tmpconfig.h", "w"); if (!out_h) { fclose(out); + fclose(tristate); return 1; } @@ -707,6 +714,9 @@ int conf_write_autoconf(void) "# %s" "#\n", sym_get_string_value(sym), ctime(&now)); + fprintf(tristate, "#\n" + "# Automatically generated - do not edit\n" + "\n"); fprintf(out_h, "/*\n" " * Automatically generated C config: don't edit\n" " * Linux kernel version: %s\n" @@ -727,10 +737,14 @@ int conf_write_autoconf(void) break; case mod: fprintf(out, "CONFIG_%s=m\n", sym->name); + fprintf(tristate, "CONFIG_%s=M\n", sym->name); fprintf(out_h, "#define CONFIG_%s_MODULE 1\n", sym->name); break; case yes: fprintf(out, "CONFIG_%s=y\n", sym->name); + if (sym->type == S_TRISTATE) + fprintf(tristate, "CONFIG_%s=Y\n", + sym->name); fprintf(out_h, "#define CONFIG_%s 1\n", sym->name); break; } @@ -772,6 +786,7 @@ int conf_write_autoconf(void) } } fclose(out); + fclose(tristate); fclose(out_h); name = getenv("KCONFIG_AUTOHEADER"); @@ -779,6 +794,11 @@ int conf_write_autoconf(void) name = "include/generated/autoconf.h"; if (rename(".tmpconfig.h", name)) return 1; + name = getenv("KCONFIG_TRISTATE"); + if (!name) + name = "include/config/tristate.conf"; + if (rename(".tmpconfig_tristate", name)) + return 1; name = conf_get_autoconfig_name(); /* * This must be the last step, kbuild has a dependency on auto.conf -- GitLab From d9bdcc72ecf055f97ed736a6c0309bd41baf10a7 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Tue, 8 Dec 2009 16:03:10 +0100 Subject: [PATCH 093/618] kbuild: fix make clean after mismerge Fix typo / thinko in commit bc081dd. Signed-off-by: Michal Marek --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 391fcb396324..8491b21b5537 100644 --- a/Makefile +++ b/Makefile @@ -1174,7 +1174,7 @@ clean: archclean $(clean-dirs) \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' -o -name 'modules.order' \ - -o modules.order -o -name '.tmp_*.o.*' \ + -o -name modules.builtin -o -name '.tmp_*.o.*' \ -o -name '*.gcno' \) -type f -print | xargs rm -f # mrproper - Delete all generated files, including .config -- GitLab From 6d87fea4dd7152df4a4605a3846c3bf10f869e0c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 9 Dec 2009 06:55:19 -0500 Subject: [PATCH 094/618] gen_init_cpio: fixed fwrite warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On compilers with security warnings enabled by default, we get: usr/gen_init_cpio.c: In function ‘cpio_mkfile’: usr/gen_init_cpio.c:357: warning: ignoring return value of ‘fwrite’, declared with attribute warn_unused_result So check the return value and handle errors accordingly. Signed-off-by: Mike Frysinger Signed-off-by: Michal Marek --- usr/gen_init_cpio.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/usr/gen_init_cpio.c b/usr/gen_init_cpio.c index 83b3dde1a83b..b2b3c2d1cf8b 100644 --- a/usr/gen_init_cpio.c +++ b/usr/gen_init_cpio.c @@ -354,7 +354,10 @@ static int cpio_mkfile(const char *name, const char *location, push_pad(); if (size) { - fwrite(filebuf, size, 1, stdout); + if (fwrite(filebuf, size, 1, stdout) != 1) { + fprintf(stderr, "writing filebuf failed\n"); + goto error; + } offset += size; push_pad(); } -- GitLab From 46e75f66677f5094bb51e91f9473128c4e907c7d Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 7 Dec 2009 19:56:42 +1100 Subject: [PATCH 095/618] net: fix for utsrelease.h moving to generated Signed-off-by: Stephen Rothwell Signed-off-by: Michal Marek --- drivers/net/wireless/iwlwifi/iwl-core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 675b7df632fc..27ca859e7453 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -63,7 +63,7 @@ #ifndef __iwl_core_h__ #define __iwl_core_h__ -#include +#include /************************ * forward declarations * -- GitLab From 5543c72e2bbb30e5ba5938b18ec26617b8b3fb04 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Thu, 10 Dec 2009 09:59:20 -0800 Subject: [PATCH 096/618] [SCSI] libfc: remote port gets stuck in restart state without really restarting We ran into a scenario where a remote port goes into RESTART state, but never gets added to scsi transport. The running vmcore showed the following: a) Port was in RESTART state b) rdata->event was STOP c) no work gets scheduled for the remote work to fc_rport_work After this point, shut/no-shut of the remote port did not cause the port to get re-discovered. The port would move betwen DELETE and RESTART states, but the event would always be STOP, no work would get scheduled to fc_rport_work and the port would not get added to scsi_transport. The problem is that rdata->event is not set to NONE after a port is restarted. After this point, no more work gets scheduled for the remote port since new work is scheduled only if rdata->event is non-NONE. So, the event and state keep changing, but fc_rport_work does not get scheduled to actually handle the event. Here's a transition of states that explains the above observation: ) Port is first in READY State, event is NONE 2) RSCN on shut, port goes to DELETED, event is stop 3) Before fc_rport_work runs, RSCN on no-shut, port goes to RESTART, event is still STOP 4) fc_rport_work gets scheduled, removes the port from transport, sees state as RESTART, begins the PLOGI state machine, event remains as STOP (event NOT changed to NONE, this is the bug) 5) Plogi state machine completes, port state goes to READY, event goes to READY, but no work is scheduled since event was STOP (non-NONE) before. Fc_rport_work is not scheduled, port remains in READY state, but is not added to transport. Things are broken at this point. Libfc rport is ready, but no transport rport created. 6) now a shut causes port state to change to DELETE, event to change to STOP, no work gets scheduled 7) no-shut causes port state to change to RESTART, event remains at STOP, no work gets scheduled (6) and (7) now get repeated everytime we do shut/no-shut. No way to get out of this state. Fcc reset does not help too. Only way to get out is to load/unload module. Fix is to set rdata->event to NONE while processing the STOP/LOGO/FAILED events, inside the discovery and rport locks. Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_rport.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 35ca0e72df46..02300523b234 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -310,6 +310,7 @@ static void fc_rport_work(struct work_struct *work) restart = 1; else list_del(&rdata->peers); + rdata->event = RPORT_EV_NONE; mutex_unlock(&rdata->rp_mutex); mutex_unlock(&lport->disc.disc_mutex); } -- GitLab From c1ecb90a66c5afc7cc5c9349f9c3714eef4a5cfb Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Thu, 10 Dec 2009 09:59:26 -0800 Subject: [PATCH 097/618] [SCSI] libfc: reduce hold time on SCSI host lock Introduce a new lock to protect the list of fc_fcp_pkt structs in libfc instead of using the host lock. This reduces the contention of this heavily used lock, and I see up to a 25% performance gain in CPU bound small I/O tests when scaling out across multiple quad-core CPUs. The big win is in removing the host lock from the completion path completely, as it does not need to be held around the call to scsi_done. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_fcp.c | 65 ++++++++++++++++++++----------------- 1 file changed, 36 insertions(+), 29 deletions(-) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index c4b58d042f6f..881d5dfe8c74 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -68,18 +68,20 @@ struct kmem_cache *scsi_pkt_cachep; /** * struct fc_fcp_internal - FCP layer internal data - * @scsi_pkt_pool: Memory pool to draw FCP packets from + * @scsi_pkt_pool: Memory pool to draw FCP packets from + * @scsi_queue_lock: Protects the scsi_pkt_queue * @scsi_pkt_queue: Current FCP packets * @last_can_queue_ramp_down_time: ramp down time * @last_can_queue_ramp_up_time: ramp up time * @max_can_queue: max can_queue size */ struct fc_fcp_internal { - mempool_t *scsi_pkt_pool; - struct list_head scsi_pkt_queue; - unsigned long last_can_queue_ramp_down_time; - unsigned long last_can_queue_ramp_up_time; - int max_can_queue; + mempool_t *scsi_pkt_pool; + spinlock_t scsi_queue_lock; + struct list_head scsi_pkt_queue; + unsigned long last_can_queue_ramp_down_time; + unsigned long last_can_queue_ramp_up_time; + int max_can_queue; }; #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv) @@ -410,12 +412,14 @@ static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport, unsigned long flags; fp = fc_frame_alloc(lport, len); - if (!fp) { - spin_lock_irqsave(lport->host->host_lock, flags); - fc_fcp_can_queue_ramp_down(lport); - spin_unlock_irqrestore(lport->host->host_lock, flags); - } - return fp; + if (likely(fp)) + return fp; + + /* error case */ + spin_lock_irqsave(lport->host->host_lock, flags); + fc_fcp_can_queue_ramp_down(lport); + spin_unlock_irqrestore(lport->host->host_lock, flags); + return NULL; } /** @@ -990,7 +994,7 @@ static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id, struct scsi_cmnd *sc_cmd; unsigned long flags; - spin_lock_irqsave(lport->host->host_lock, flags); + spin_lock_irqsave(&si->scsi_queue_lock, flags); restart: list_for_each_entry(fsp, &si->scsi_pkt_queue, list) { sc_cmd = fsp->cmd; @@ -1001,7 +1005,7 @@ static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id, continue; fc_fcp_pkt_hold(fsp); - spin_unlock_irqrestore(lport->host->host_lock, flags); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); if (!fc_fcp_lock_pkt(fsp)) { fc_fcp_cleanup_cmd(fsp, error); @@ -1010,14 +1014,14 @@ static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id, } fc_fcp_pkt_release(fsp); - spin_lock_irqsave(lport->host->host_lock, flags); + spin_lock_irqsave(&si->scsi_queue_lock, flags); /* * while we dropped the lock multiple pkts could * have been released, so we have to start over. */ goto restart; } - spin_unlock_irqrestore(lport->host->host_lock, flags); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); } /** @@ -1035,11 +1039,12 @@ static void fc_fcp_abort_io(struct fc_lport *lport) * @fsp: The FCP packet to send * * Return: Zero for success and -1 for failure - * Locks: Called with the host lock and irqs disabled. + * Locks: Called without locks held */ static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp) { struct fc_fcp_internal *si = fc_get_scsi_internal(lport); + unsigned long flags; int rc; fsp->cmd->SCp.ptr = (char *)fsp; @@ -1049,13 +1054,16 @@ static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp) int_to_scsilun(fsp->cmd->device->lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun); memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len); - list_add_tail(&fsp->list, &si->scsi_pkt_queue); - spin_unlock_irq(lport->host->host_lock); + spin_lock_irqsave(&si->scsi_queue_lock, flags); + list_add_tail(&fsp->list, &si->scsi_pkt_queue); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv); - spin_lock_irq(lport->host->host_lock); - if (rc) + if (unlikely(rc)) { + spin_lock_irqsave(&si->scsi_queue_lock, flags); list_del(&fsp->list); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); + } return rc; } @@ -1752,6 +1760,7 @@ int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *)) struct fcoe_dev_stats *stats; lport = shost_priv(sc_cmd->device->host); + spin_unlock_irq(lport->host->host_lock); rval = fc_remote_port_chkready(rport); if (rval) { @@ -1834,6 +1843,7 @@ int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *)) rc = SCSI_MLQUEUE_HOST_BUSY; } out: + spin_lock_irq(lport->host->host_lock); return rc; } EXPORT_SYMBOL(fc_queuecommand); @@ -1864,11 +1874,8 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) lport = fsp->lp; si = fc_get_scsi_internal(lport); - spin_lock_irqsave(lport->host->host_lock, flags); - if (!fsp->cmd) { - spin_unlock_irqrestore(lport->host->host_lock, flags); + if (!fsp->cmd) return; - } /* * if can_queue ramp down is done then try can_queue ramp up @@ -1880,10 +1887,8 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) sc_cmd = fsp->cmd; fsp->cmd = NULL; - if (!sc_cmd->SCp.ptr) { - spin_unlock_irqrestore(lport->host->host_lock, flags); + if (!sc_cmd->SCp.ptr) return; - } CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status; switch (fsp->status_code) { @@ -1945,10 +1950,11 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) break; } + spin_lock_irqsave(&si->scsi_queue_lock, flags); list_del(&fsp->list); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); sc_cmd->SCp.ptr = NULL; sc_cmd->scsi_done(sc_cmd); - spin_unlock_irqrestore(lport->host->host_lock, flags); /* release ref from initial allocation in queue command */ fc_fcp_pkt_release(fsp); @@ -2216,6 +2222,7 @@ int fc_fcp_init(struct fc_lport *lport) lport->scsi_priv = si; si->max_can_queue = lport->host->can_queue; INIT_LIST_HEAD(&si->scsi_pkt_queue); + spin_lock_init(&si->scsi_queue_lock); si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep); if (!si->scsi_pkt_pool) { -- GitLab From 55a66d3c1e57f7e3e554d6ec8011e840f3802f20 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Thu, 10 Dec 2009 09:59:31 -0800 Subject: [PATCH 098/618] [SCSI] fcoe, libfc: adds enable/disable for fcoe interface This is to allow fcoemon util to enable or disable a fcoe interface according to DCB link state change. Adds sysfs module param enable and disable for this and also updates existing other module param description to be consistent and more accurate since older description had double "fcoe" word with less meaningful netdev reference to user space. Adds code to ignore redundant fc_lport_enter_reset handling for a already disabled fcoe interface by checking LPORT_ST_DISABLED or LPORT_ST_LOGO states, this also prevents lport state transition on link flap on a disabled interface. Above changes required lport state transition to get out of disabled or logo state on call to fc_fabric_login. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 110 +++++++++++++++++++++++++++++++++- drivers/scsi/libfc/fc_lport.c | 7 ++- 2 files changed, 114 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 9b6aebbb47d3..e3896fcb06e3 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -101,6 +101,8 @@ static int fcoe_cpu_callback(struct notifier_block *, unsigned long, void *); static int fcoe_create(const char *, struct kernel_param *); static int fcoe_destroy(const char *, struct kernel_param *); +static int fcoe_enable(const char *, struct kernel_param *); +static int fcoe_disable(const char *, struct kernel_param *); static struct fc_seq *fcoe_elsct_send(struct fc_lport *, u32 did, struct fc_frame *, @@ -115,10 +117,16 @@ static void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *); module_param_call(create, fcoe_create, NULL, NULL, S_IWUSR); __MODULE_PARM_TYPE(create, "string"); -MODULE_PARM_DESC(create, "Create fcoe fcoe using net device passed in."); +MODULE_PARM_DESC(create, " Creates fcoe instance on a ethernet interface"); module_param_call(destroy, fcoe_destroy, NULL, NULL, S_IWUSR); __MODULE_PARM_TYPE(destroy, "string"); -MODULE_PARM_DESC(destroy, "Destroy fcoe fcoe"); +MODULE_PARM_DESC(destroy, " Destroys fcoe instance on a ethernet interface"); +module_param_call(enable, fcoe_enable, NULL, NULL, S_IWUSR); +__MODULE_PARM_TYPE(enable, "string"); +MODULE_PARM_DESC(enable, " Enables fcoe on a ethernet interface."); +module_param_call(disable, fcoe_disable, NULL, NULL, S_IWUSR); +__MODULE_PARM_TYPE(disable, "string"); +MODULE_PARM_DESC(disable, " Disables fcoe on a ethernet interface."); /* notification function for packets from net device */ static struct notifier_block fcoe_notifier = { @@ -1858,6 +1866,104 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer) return NULL; } +/** + * fcoe_disable() - Disables a FCoE interface + * @buffer: The name of the Ethernet interface to be disabled + * @kp: The associated kernel parameter + * + * Called from sysfs. + * + * Returns: 0 for success + */ +static int fcoe_disable(const char *buffer, struct kernel_param *kp) +{ + struct fcoe_interface *fcoe; + struct net_device *netdev; + int rc = 0; + + mutex_lock(&fcoe_config_mutex); +#ifdef CONFIG_FCOE_MODULE + /* + * Make sure the module has been initialized, and is not about to be + * removed. Module paramter sysfs files are writable before the + * module_init function is called and after module_exit. + */ + if (THIS_MODULE->state != MODULE_STATE_LIVE) { + rc = -ENODEV; + goto out_nodev; + } +#endif + + netdev = fcoe_if_to_netdev(buffer); + if (!netdev) { + rc = -ENODEV; + goto out_nodev; + } + + rtnl_lock(); + fcoe = fcoe_hostlist_lookup_port(netdev); + rtnl_unlock(); + + if (fcoe) + fc_fabric_logoff(fcoe->ctlr.lp); + else + rc = -ENODEV; + + dev_put(netdev); +out_nodev: + mutex_unlock(&fcoe_config_mutex); + return rc; +} + +/** + * fcoe_enable() - Enables a FCoE interface + * @buffer: The name of the Ethernet interface to be enabled + * @kp: The associated kernel parameter + * + * Called from sysfs. + * + * Returns: 0 for success + */ +static int fcoe_enable(const char *buffer, struct kernel_param *kp) +{ + struct fcoe_interface *fcoe; + struct net_device *netdev; + int rc = 0; + + mutex_lock(&fcoe_config_mutex); +#ifdef CONFIG_FCOE_MODULE + /* + * Make sure the module has been initialized, and is not about to be + * removed. Module paramter sysfs files are writable before the + * module_init function is called and after module_exit. + */ + if (THIS_MODULE->state != MODULE_STATE_LIVE) { + rc = -ENODEV; + goto out_nodev; + } +#endif + + netdev = fcoe_if_to_netdev(buffer); + if (!netdev) { + rc = -ENODEV; + goto out_nodev; + } + + rtnl_lock(); + fcoe = fcoe_hostlist_lookup_port(netdev); + rtnl_unlock(); + + if (fcoe) + rc = fc_fabric_login(fcoe->ctlr.lp); + else + rc = -ENODEV; + + dev_put(netdev); +out_nodev: + mutex_unlock(&fcoe_config_mutex); + return rc; +} + /** * fcoe_destroy() - Destroy a FCoE interface * @buffer: The name of the Ethernet interface to be destroyed diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 74338c83ad0a..0b165024a219 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -537,7 +537,9 @@ int fc_fabric_login(struct fc_lport *lport) int rc = -1; mutex_lock(&lport->lp_mutex); - if (lport->state == LPORT_ST_DISABLED) { + if (lport->state == LPORT_ST_DISABLED || + lport->state == LPORT_ST_LOGO) { + fc_lport_state_enter(lport, LPORT_ST_RESET); fc_lport_enter_reset(lport); rc = 0; } @@ -967,6 +969,9 @@ static void fc_lport_enter_reset(struct fc_lport *lport) FC_LPORT_DBG(lport, "Entered RESET state from %s state\n", fc_lport_state(lport)); + if (lport->state == LPORT_ST_DISABLED || lport->state == LPORT_ST_LOGO) + return; + if (lport->vport) { if (lport->link_up) fc_vport_set_state(lport->vport, FC_VPORT_INITIALIZING); -- GitLab From 53ca353594a254e6bd45ccf2d405aa31bcbb7091 Mon Sep 17 00:00:00 2001 From: adam radford Date: Thu, 10 Dec 2009 11:53:31 -0800 Subject: [PATCH 099/618] [SCSI] 3w-9xxx fix bug in sgl loading This small patch fixes a bug in the 3w-9xxx driver where it would load an invalid sgl address in the ioctl path even if request length was zero. Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/3w-9xxx.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 3bf75924741f..84d3bbaa95e7 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -76,6 +76,7 @@ Fix bug in twa_get_param() on 4GB+. Use pci_resource_len() for ioremap(). 2.26.02.012 - Add power management support. + 2.26.02.013 - Fix bug in twa_load_sgl(). */ #include @@ -100,7 +101,7 @@ #include "3w-9xxx.h" /* Globals */ -#define TW_DRIVER_VERSION "2.26.02.012" +#define TW_DRIVER_VERSION "2.26.02.013" static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT]; static unsigned int twa_device_extension_count; static int twa_major = -1; @@ -1382,10 +1383,12 @@ static void twa_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_comm newcommand = &full_command_packet->command.newcommand; newcommand->request_id__lunl = cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id)); - newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); - newcommand->sg_list[0].length = cpu_to_le32(length); + if (length) { + newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); + newcommand->sg_list[0].length = cpu_to_le32(length); + } newcommand->sgl_entries__lunh = - cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), 1)); + cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), length ? 1 : 0)); } else { oldcommand = &full_command_packet->command.oldcommand; oldcommand->request_id = request_id; -- GitLab From 7539a3b3d1f892dd97eaf094134d7de55c13befe Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 13 Dec 2009 00:07:30 +0100 Subject: [PATCH 100/618] sched: Make wakeup side and atomic variants of completion API irq safe Alan Stern noticed that all the wakeup side (and atomic) variants of the completion APIs should be irq safe, but the newly introduced completion_done() and try_wait_for_completion() aren't. The use of the irq unsafe variants in IRQ contexts can cause crashes/hangs. Fix the problem by making them use spin_lock_irqsave() and spin_lock_irqrestore(). Reported-by: Alan Stern Signed-off-by: Rafael J. Wysocki Cc: Linus Torvalds Cc: Zhang Rui Cc: pm list Cc: Peter Zijlstra Cc: David Chinner Cc: Lachlan McIlroy LKML-Reference: <200912130007.30541.rjw@sisk.pl> Signed-off-by: Ingo Molnar --- kernel/sched.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index ff39cadf621e..8b3532f262d7 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5908,14 +5908,15 @@ EXPORT_SYMBOL(wait_for_completion_killable); */ bool try_wait_for_completion(struct completion *x) { + unsigned long flags; int ret = 1; - spin_lock_irq(&x->wait.lock); + spin_lock_irqsave(&x->wait.lock, flags); if (!x->done) ret = 0; else x->done--; - spin_unlock_irq(&x->wait.lock); + spin_unlock_irqrestore(&x->wait.lock, flags); return ret; } EXPORT_SYMBOL(try_wait_for_completion); @@ -5930,12 +5931,13 @@ EXPORT_SYMBOL(try_wait_for_completion); */ bool completion_done(struct completion *x) { + unsigned long flags; int ret = 1; - spin_lock_irq(&x->wait.lock); + spin_lock_irqsave(&x->wait.lock, flags); if (!x->done) ret = 0; - spin_unlock_irq(&x->wait.lock); + spin_unlock_irqrestore(&x->wait.lock, flags); return ret; } EXPORT_SYMBOL(completion_done); -- GitLab From 663997d417330a59a566452f52cfa04c8ffd190b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 12 Dec 2009 13:57:27 -0800 Subject: [PATCH 101/618] sched: Use pr_fmt() and pr_() - Convert printk(KERN_ to pr_ (not KERN_DEBUG) - Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - Coalesce long format strings - Add missing \n to "ERROR: !SD_LOAD_BALANCE domain has parent" Signed-off-by: Joe Perches Cc: Peter Zijlstra LKML-Reference: <1260655047.2637.7.camel@Joe-Laptop.home> Signed-off-by: Ingo Molnar --- kernel/sched.c | 94 ++++++++++++++++++----------------------- kernel/sched_idletask.c | 2 +- 2 files changed, 43 insertions(+), 53 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 8b3532f262d7..258c73c6a2f3 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -26,6 +26,8 @@ * Thomas Gleixner, Mike Kravetz */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -5337,8 +5339,8 @@ static noinline void __schedule_bug(struct task_struct *prev) { struct pt_regs *regs = get_irq_regs(); - printk(KERN_ERR "BUG: scheduling while atomic: %s/%d/0x%08x\n", - prev->comm, prev->pid, preempt_count()); + pr_err("BUG: scheduling while atomic: %s/%d/0x%08x\n", + prev->comm, prev->pid, preempt_count()); debug_show_held_locks(prev); print_modules(); @@ -6906,23 +6908,23 @@ void sched_show_task(struct task_struct *p) unsigned state; state = p->state ? __ffs(p->state) + 1 : 0; - printk(KERN_INFO "%-13.13s %c", p->comm, + pr_info("%-13.13s %c", p->comm, state < sizeof(stat_nam) - 1 ? stat_nam[state] : '?'); #if BITS_PER_LONG == 32 if (state == TASK_RUNNING) - printk(KERN_CONT " running "); + pr_cont(" running "); else - printk(KERN_CONT " %08lx ", thread_saved_pc(p)); + pr_cont(" %08lx ", thread_saved_pc(p)); #else if (state == TASK_RUNNING) - printk(KERN_CONT " running task "); + pr_cont(" running task "); else - printk(KERN_CONT " %016lx ", thread_saved_pc(p)); + pr_cont(" %016lx ", thread_saved_pc(p)); #endif #ifdef CONFIG_DEBUG_STACK_USAGE free = stack_not_used(p); #endif - printk(KERN_CONT "%5lu %5d %6d 0x%08lx\n", free, + pr_cont("%5lu %5d %6d 0x%08lx\n", free, task_pid_nr(p), task_pid_nr(p->real_parent), (unsigned long)task_thread_info(p)->flags); @@ -6934,11 +6936,9 @@ void show_state_filter(unsigned long state_filter) struct task_struct *g, *p; #if BITS_PER_LONG == 32 - printk(KERN_INFO - " task PC stack pid father\n"); + pr_info(" task PC stack pid father\n"); #else - printk(KERN_INFO - " task PC stack pid father\n"); + pr_info(" task PC stack pid father\n"); #endif read_lock(&tasklist_lock); do_each_thread(g, p) { @@ -7296,9 +7296,8 @@ static void move_task_off_dead_cpu(int dead_cpu, struct task_struct *p) * leave kernel. */ if (p->mm && printk_ratelimit()) { - printk(KERN_INFO "process %d (%s) no " - "longer affine to cpu%d\n", - task_pid_nr(p), p->comm, dead_cpu); + pr_info("process %d (%s) no longer affine to cpu%d\n", + task_pid_nr(p), p->comm, dead_cpu); } } @@ -7805,48 +7804,44 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, printk(KERN_DEBUG "%*s domain %d: ", level, "", level); if (!(sd->flags & SD_LOAD_BALANCE)) { - printk("does not load-balance\n"); + pr_cont("does not load-balance\n"); if (sd->parent) - printk(KERN_ERR "ERROR: !SD_LOAD_BALANCE domain" - " has parent"); + pr_err("ERROR: !SD_LOAD_BALANCE domain has parent\n"); return -1; } - printk(KERN_CONT "span %s level %s\n", str, sd->name); + pr_cont("span %s level %s\n", str, sd->name); if (!cpumask_test_cpu(cpu, sched_domain_span(sd))) { - printk(KERN_ERR "ERROR: domain->span does not contain " - "CPU%d\n", cpu); + pr_err("ERROR: domain->span does not contain CPU%d\n", cpu); } if (!cpumask_test_cpu(cpu, sched_group_cpus(group))) { - printk(KERN_ERR "ERROR: domain->groups does not contain" - " CPU%d\n", cpu); + pr_err("ERROR: domain->groups does not contain CPU%d\n", cpu); } printk(KERN_DEBUG "%*s groups:", level + 1, ""); do { if (!group) { - printk("\n"); - printk(KERN_ERR "ERROR: group is NULL\n"); + pr_cont("\n"); + pr_err("ERROR: group is NULL\n"); break; } if (!group->cpu_power) { - printk(KERN_CONT "\n"); - printk(KERN_ERR "ERROR: domain->cpu_power not " - "set\n"); + pr_cont("\n"); + pr_err("ERROR: domain->cpu_power not set\n"); break; } if (!cpumask_weight(sched_group_cpus(group))) { - printk(KERN_CONT "\n"); - printk(KERN_ERR "ERROR: empty group\n"); + pr_cont("\n"); + pr_err("ERROR: empty group\n"); break; } if (cpumask_intersects(groupmask, sched_group_cpus(group))) { - printk(KERN_CONT "\n"); - printk(KERN_ERR "ERROR: repeated CPUs\n"); + pr_cont("\n"); + pr_err("ERROR: repeated CPUs\n"); break; } @@ -7854,23 +7849,21 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group)); - printk(KERN_CONT " %s", str); + pr_cont(" %s", str); if (group->cpu_power != SCHED_LOAD_SCALE) { - printk(KERN_CONT " (cpu_power = %d)", - group->cpu_power); + pr_cont(" (cpu_power = %d)", group->cpu_power); } group = group->next; } while (group != sd->groups); - printk(KERN_CONT "\n"); + pr_cont("\n"); if (!cpumask_equal(sched_domain_span(sd), groupmask)) - printk(KERN_ERR "ERROR: groups don't span domain->span\n"); + pr_err("ERROR: groups don't span domain->span\n"); if (sd->parent && !cpumask_subset(groupmask, sched_domain_span(sd->parent))) - printk(KERN_ERR "ERROR: parent span is not a superset " - "of domain->span\n"); + pr_err("ERROR: parent span is not a superset of domain->span\n"); return 0; } @@ -8426,8 +8419,7 @@ static int build_numa_sched_groups(struct s_data *d, sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(), GFP_KERNEL, num); if (!sg) { - printk(KERN_WARNING "Can not alloc domain group for node %d\n", - num); + pr_warning("Can not alloc domain group for node %d\n", num); return -ENOMEM; } d->sched_group_nodes[num] = sg; @@ -8456,8 +8448,8 @@ static int build_numa_sched_groups(struct s_data *d, sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(), GFP_KERNEL, num); if (!sg) { - printk(KERN_WARNING - "Can not alloc domain group for node %d\n", j); + pr_warning("Can not alloc domain group for node %d\n", + j); return -ENOMEM; } sg->cpu_power = 0; @@ -8685,7 +8677,7 @@ static enum s_alloc __visit_domain_allocation_hell(struct s_data *d, d->sched_group_nodes = kcalloc(nr_node_ids, sizeof(struct sched_group *), GFP_KERNEL); if (!d->sched_group_nodes) { - printk(KERN_WARNING "Can not alloc sched group node list\n"); + pr_warning("Can not alloc sched group node list\n"); return sa_notcovered; } sched_group_nodes_bycpu[cpumask_first(cpu_map)] = d->sched_group_nodes; @@ -8702,7 +8694,7 @@ static enum s_alloc __visit_domain_allocation_hell(struct s_data *d, return sa_send_covered; d->rd = alloc_rootdomain(); if (!d->rd) { - printk(KERN_WARNING "Cannot alloc root domain\n"); + pr_warning("Cannot alloc root domain\n"); return sa_tmpmask; } return sa_rootdomain; @@ -9684,13 +9676,11 @@ void __might_sleep(char *file, int line, int preempt_offset) return; prev_jiffy = jiffies; - printk(KERN_ERR - "BUG: sleeping function called from invalid context at %s:%d\n", - file, line); - printk(KERN_ERR - "in_atomic(): %d, irqs_disabled(): %d, pid: %d, name: %s\n", - in_atomic(), irqs_disabled(), - current->pid, current->comm); + pr_err("BUG: sleeping function called from invalid context at %s:%d\n", + file, line); + pr_err("in_atomic(): %d, irqs_disabled(): %d, pid: %d, name: %s\n", + in_atomic(), irqs_disabled(), + current->pid, current->comm); debug_show_held_locks(current); if (irqs_disabled()) diff --git a/kernel/sched_idletask.c b/kernel/sched_idletask.c index 33d5384a73a8..b810e22772d5 100644 --- a/kernel/sched_idletask.c +++ b/kernel/sched_idletask.c @@ -35,7 +35,7 @@ static void dequeue_task_idle(struct rq *rq, struct task_struct *p, int sleep) { spin_unlock_irq(&rq->lock); - printk(KERN_ERR "bad: scheduling from the idle thread!\n"); + pr_err("bad: scheduling from the idle thread!\n"); dump_stack(); spin_lock_irq(&rq->lock); } -- GitLab From 0eb948dd7f7c3cec37440c16a6c738c8e75efcda Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Nov 2009 11:12:15 +0000 Subject: [PATCH 102/618] ARM: cache-l2x0: avoid taking spinlock for every iteration Taking the spinlock for every iteration is very expensive; instead, batch iterations up into 4K blocks, releasing and reacquiring the spinlock between each block. Signed-off-by: Russell King Acked-by: Catalin Marinas --- arch/arm/mm/cache-l2x0.c | 65 ++++++++++++++++++++++++++++++++-------- 1 file changed, 52 insertions(+), 13 deletions(-) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index b480f1d3591f..c1b7bfff47f4 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -31,14 +31,10 @@ static DEFINE_SPINLOCK(l2x0_lock); static inline void sync_writel(unsigned long val, unsigned long reg, unsigned long complete_mask) { - unsigned long flags; - - spin_lock_irqsave(&l2x0_lock, flags); writel(val, l2x0_base + reg); /* wait for the operation to complete */ while (readl(l2x0_base + reg) & complete_mask) ; - spin_unlock_irqrestore(&l2x0_lock, flags); } static inline void cache_sync(void) @@ -48,15 +44,20 @@ static inline void cache_sync(void) static inline void l2x0_inv_all(void) { + unsigned long flags; + /* invalidate all ways */ + spin_lock_irqsave(&l2x0_lock, flags); sync_writel(0xff, L2X0_INV_WAY, 0xff); cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_inv_range(unsigned long start, unsigned long end) { - unsigned long addr; + unsigned long flags; + spin_lock_irqsave(&l2x0_lock, flags); if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); sync_writel(start, L2X0_CLEAN_INV_LINE_PA, 1); @@ -68,29 +69,67 @@ static void l2x0_inv_range(unsigned long start, unsigned long end) sync_writel(end, L2X0_CLEAN_INV_LINE_PA, 1); } - for (addr = start; addr < end; addr += CACHE_LINE_SIZE) - sync_writel(addr, L2X0_INV_LINE_PA, 1); + while (start < end) { + unsigned long blk_end = start + min(end - start, 4096UL); + + while (start < blk_end) { + sync_writel(start, L2X0_INV_LINE_PA, 1); + start += CACHE_LINE_SIZE; + } + + if (blk_end < end) { + spin_unlock_irqrestore(&l2x0_lock, flags); + spin_lock_irqsave(&l2x0_lock, flags); + } + } cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_clean_range(unsigned long start, unsigned long end) { - unsigned long addr; + unsigned long flags; + spin_lock_irqsave(&l2x0_lock, flags); start &= ~(CACHE_LINE_SIZE - 1); - for (addr = start; addr < end; addr += CACHE_LINE_SIZE) - sync_writel(addr, L2X0_CLEAN_LINE_PA, 1); + while (start < end) { + unsigned long blk_end = start + min(end - start, 4096UL); + + while (start < blk_end) { + sync_writel(start, L2X0_CLEAN_LINE_PA, 1); + start += CACHE_LINE_SIZE; + } + + if (blk_end < end) { + spin_unlock_irqrestore(&l2x0_lock, flags); + spin_lock_irqsave(&l2x0_lock, flags); + } + } cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_flush_range(unsigned long start, unsigned long end) { - unsigned long addr; + unsigned long flags; + spin_lock_irqsave(&l2x0_lock, flags); start &= ~(CACHE_LINE_SIZE - 1); - for (addr = start; addr < end; addr += CACHE_LINE_SIZE) - sync_writel(addr, L2X0_CLEAN_INV_LINE_PA, 1); + while (start < end) { + unsigned long blk_end = start + min(end - start, 4096UL); + + while (start < blk_end) { + sync_writel(start, L2X0_CLEAN_INV_LINE_PA, 1); + start += CACHE_LINE_SIZE; + } + + if (blk_end < end) { + spin_unlock_irqrestore(&l2x0_lock, flags); + spin_lock_irqsave(&l2x0_lock, flags); + } + } cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); } void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) -- GitLab From 3d1074349b22c9653e746282564136c87668c2b8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Nov 2009 11:41:09 +0000 Subject: [PATCH 103/618] ARM: cache-l2x0: make better use of background cache handling There's no point having the hardware support background operations if we issue a cache operation, and then wait for it to complete before calculating the address of the next operation. We gain no advantage in the cache controller stalling the bus until completion. What we should be doing is using the 'wait' time productively by calculating the address of the next operation, and only then waiting for the previous operation to complete. This means that cache operations can occur in parallel with the CPU calculating the next address. Signed-off-by: Russell King Acked-by: Catalin Marinas --- arch/arm/mm/cache-l2x0.c | 34 +++++++++++++++++++++++----------- 1 file changed, 23 insertions(+), 11 deletions(-) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index c1b7bfff47f4..ec85dda1e733 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -28,18 +28,18 @@ static void __iomem *l2x0_base; static DEFINE_SPINLOCK(l2x0_lock); -static inline void sync_writel(unsigned long val, unsigned long reg, - unsigned long complete_mask) +static inline void cache_wait(void __iomem *reg, unsigned long mask) { - writel(val, l2x0_base + reg); /* wait for the operation to complete */ - while (readl(l2x0_base + reg) & complete_mask) + while (readl(reg) & mask) ; } static inline void cache_sync(void) { - sync_writel(0, L2X0_CACHE_SYNC, 1); + void __iomem *base = l2x0_base; + writel(0, base + L2X0_CACHE_SYNC); + cache_wait(base + L2X0_CACHE_SYNC, 1); } static inline void l2x0_inv_all(void) @@ -48,32 +48,37 @@ static inline void l2x0_inv_all(void) /* invalidate all ways */ spin_lock_irqsave(&l2x0_lock, flags); - sync_writel(0xff, L2X0_INV_WAY, 0xff); + writel(0xff, l2x0_base + L2X0_INV_WAY); + cache_wait(l2x0_base + L2X0_INV_WAY, 0xff); cache_sync(); spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_inv_range(unsigned long start, unsigned long end) { + void __iomem *base = l2x0_base; unsigned long flags; spin_lock_irqsave(&l2x0_lock, flags); if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); - sync_writel(start, L2X0_CLEAN_INV_LINE_PA, 1); + cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } if (end & (CACHE_LINE_SIZE - 1)) { end &= ~(CACHE_LINE_SIZE - 1); - sync_writel(end, L2X0_CLEAN_INV_LINE_PA, 1); + cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel(end, base + L2X0_CLEAN_INV_LINE_PA); } while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); while (start < blk_end) { - sync_writel(start, L2X0_INV_LINE_PA, 1); + cache_wait(base + L2X0_INV_LINE_PA, 1); + writel(start, base + L2X0_INV_LINE_PA); start += CACHE_LINE_SIZE; } @@ -82,12 +87,14 @@ static void l2x0_inv_range(unsigned long start, unsigned long end) spin_lock_irqsave(&l2x0_lock, flags); } } + cache_wait(base + L2X0_INV_LINE_PA, 1); cache_sync(); spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_clean_range(unsigned long start, unsigned long end) { + void __iomem *base = l2x0_base; unsigned long flags; spin_lock_irqsave(&l2x0_lock, flags); @@ -96,7 +103,8 @@ static void l2x0_clean_range(unsigned long start, unsigned long end) unsigned long blk_end = start + min(end - start, 4096UL); while (start < blk_end) { - sync_writel(start, L2X0_CLEAN_LINE_PA, 1); + cache_wait(base + L2X0_CLEAN_LINE_PA, 1); + writel(start, base + L2X0_CLEAN_LINE_PA); start += CACHE_LINE_SIZE; } @@ -105,12 +113,14 @@ static void l2x0_clean_range(unsigned long start, unsigned long end) spin_lock_irqsave(&l2x0_lock, flags); } } + cache_wait(base + L2X0_CLEAN_LINE_PA, 1); cache_sync(); spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_flush_range(unsigned long start, unsigned long end) { + void __iomem *base = l2x0_base; unsigned long flags; spin_lock_irqsave(&l2x0_lock, flags); @@ -119,7 +129,8 @@ static void l2x0_flush_range(unsigned long start, unsigned long end) unsigned long blk_end = start + min(end - start, 4096UL); while (start < blk_end) { - sync_writel(start, L2X0_CLEAN_INV_LINE_PA, 1); + cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } @@ -128,6 +139,7 @@ static void l2x0_flush_range(unsigned long start, unsigned long end) spin_lock_irqsave(&l2x0_lock, flags); } } + cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); cache_sync(); spin_unlock_irqrestore(&l2x0_lock, flags); } -- GitLab From ccaf5f05b218e5eb41e2f5cdfd26b18dce4a0218 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 11 Dec 2009 02:21:57 +0100 Subject: [PATCH 104/618] ARM: 5848/1: kill flush_ioremap_region() There is not enough users to warrant its existence, and it is actually an obstacle to progress with the new DMA API which cannot cover this case properly. To keep backward compatibility, let's perform the necessary custom cache maintenance locally in the only driver affected. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/cacheflush.h | 7 ------- arch/arm/mm/proc-syms.c | 1 - drivers/mtd/maps/pxa2xx-flash.c | 13 +++++++++++-- 3 files changed, 11 insertions(+), 10 deletions(-) diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 73eceb87e588..3db7acd39a62 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -465,13 +465,6 @@ static inline void flush_kernel_dcache_page(struct page *page) */ #define flush_icache_page(vma,page) do { } while (0) -static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt, - unsigned offset, size_t size) -{ - const void *start = (void __force *)virt + offset; - dmac_inv_range(start, start + size); -} - /* * flush_cache_vmap() is used when creating mappings (eg, via vmap, * vmalloc, ioremap etc) in kernel space for pages. On non-VIPT diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index ac5c80062b70..f604aa8acae9 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -28,7 +28,6 @@ EXPORT_SYMBOL(__cpuc_flush_user_all); EXPORT_SYMBOL(__cpuc_flush_user_range); EXPORT_SYMBOL(__cpuc_coherent_kern_range); EXPORT_SYMBOL(__cpuc_flush_dcache_page); -EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */ #else EXPORT_SYMBOL(cpu_cache); #endif diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 74fa075c838a..b13f6417b5b2 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -20,14 +20,23 @@ #include #include -#include #include +#define CACHELINESIZE 32 + static void pxa2xx_map_inval_cache(struct map_info *map, unsigned long from, ssize_t len) { - flush_ioremap_region(map->phys, map->cached, from, len); + unsigned long start = (unsigned long)map->cached + from; + unsigned long end = start + len; + + start &= ~(CACHELINESIZE - 1); + while (start < end) { + /* invalidate D cache line */ + asm volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)); + start += CACHELINESIZE; + } } struct pxa2xx_flash_info { -- GitLab From 2c9b9c8490b60428fa2d1c64042f7c7caed93940 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 26 Nov 2009 12:56:21 +0000 Subject: [PATCH 105/618] ARM: add size argument to __cpuc_flush_dcache_page ... and rename the function since it no longer operates on just pages. Signed-off-by: Russell King --- arch/arm/include/asm/cacheflush.h | 10 +++++----- arch/arm/mm/cache-fa.S | 11 ++++++----- arch/arm/mm/cache-v3.S | 9 +++++---- arch/arm/mm/cache-v4.S | 9 +++++---- arch/arm/mm/cache-v4wb.S | 11 ++++++----- arch/arm/mm/cache-v4wt.S | 11 ++++++----- arch/arm/mm/cache-v6.S | 11 ++++++----- arch/arm/mm/cache-v7.S | 13 +++++++------ arch/arm/mm/flush.c | 4 ++-- arch/arm/mm/highmem.c | 2 +- arch/arm/mm/nommu.c | 2 +- arch/arm/mm/proc-arm1020.S | 11 ++++++----- arch/arm/mm/proc-arm1020e.S | 11 ++++++----- arch/arm/mm/proc-arm1022.S | 11 ++++++----- arch/arm/mm/proc-arm1026.S | 11 ++++++----- arch/arm/mm/proc-arm920.S | 11 ++++++----- arch/arm/mm/proc-arm922.S | 11 ++++++----- arch/arm/mm/proc-arm925.S | 11 ++++++----- arch/arm/mm/proc-arm926.S | 11 ++++++----- arch/arm/mm/proc-arm940.S | 9 +++++---- arch/arm/mm/proc-arm946.S | 11 ++++++----- arch/arm/mm/proc-feroceon.S | 15 ++++++++------- arch/arm/mm/proc-mohawk.S | 11 ++++++----- arch/arm/mm/proc-syms.c | 2 +- arch/arm/mm/proc-xsc3.S | 11 ++++++----- arch/arm/mm/proc-xscale.S | 13 +++++++------ 26 files changed, 137 insertions(+), 116 deletions(-) diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 3db7acd39a62..730aefcfbee3 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -211,7 +211,7 @@ struct cpu_cache_fns { void (*coherent_kern_range)(unsigned long, unsigned long); void (*coherent_user_range)(unsigned long, unsigned long); - void (*flush_kern_dcache_page)(void *); + void (*flush_kern_dcache_area)(void *, size_t); void (*dma_inv_range)(const void *, const void *); void (*dma_clean_range)(const void *, const void *); @@ -236,7 +236,7 @@ extern struct cpu_cache_fns cpu_cache; #define __cpuc_flush_user_range cpu_cache.flush_user_range #define __cpuc_coherent_kern_range cpu_cache.coherent_kern_range #define __cpuc_coherent_user_range cpu_cache.coherent_user_range -#define __cpuc_flush_dcache_page cpu_cache.flush_kern_dcache_page +#define __cpuc_flush_dcache_area cpu_cache.flush_kern_dcache_area /* * These are private to the dma-mapping API. Do not use directly. @@ -255,14 +255,14 @@ extern struct cpu_cache_fns cpu_cache; #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) -#define __cpuc_flush_dcache_page __glue(_CACHE,_flush_kern_dcache_page) +#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) extern void __cpuc_flush_kern_all(void); extern void __cpuc_flush_user_all(void); extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); extern void __cpuc_coherent_kern_range(unsigned long, unsigned long); extern void __cpuc_coherent_user_range(unsigned long, unsigned long); -extern void __cpuc_flush_dcache_page(void *); +extern void __cpuc_flush_dcache_area(void *, size_t); /* * These are private to the dma-mapping API. Do not use directly. @@ -448,7 +448,7 @@ static inline void flush_kernel_dcache_page(struct page *page) { /* highmem pages are always flushed upon kunmap already */ if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page)) - __cpuc_flush_dcache_page(page_address(page)); + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } #define flush_dcache_mmap_lock(mapping) \ diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S index b63a8f7b95cf..a89444a3c016 100644 --- a/arch/arm/mm/cache-fa.S +++ b/arch/arm/mm/cache-fa.S @@ -127,15 +127,16 @@ ENTRY(fa_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(kaddr) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure that the data held in the page kaddr is written back * to the page in question. * - * - kaddr - kernel address (guaranteed to be page aligned) + * - addr - kernel address + * - size - size of region */ -ENTRY(fa_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(fa_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -213,7 +214,7 @@ ENTRY(fa_cache_fns) .long fa_flush_user_cache_range .long fa_coherent_kern_range .long fa_coherent_user_range - .long fa_flush_kern_dcache_page + .long fa_flush_kern_dcache_area .long fa_dma_inv_range .long fa_dma_clean_range .long fa_dma_flush_range diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S index 8a4abebc478a..2a482731ea36 100644 --- a/arch/arm/mm/cache-v3.S +++ b/arch/arm/mm/cache-v3.S @@ -72,14 +72,15 @@ ENTRY(v3_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *page, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(v3_flush_kern_dcache_page) +ENTRY(v3_flush_kern_dcache_area) /* FALLTHROUGH */ /* @@ -129,7 +130,7 @@ ENTRY(v3_cache_fns) .long v3_flush_user_cache_range .long v3_coherent_kern_range .long v3_coherent_user_range - .long v3_flush_kern_dcache_page + .long v3_flush_kern_dcache_area .long v3_dma_inv_range .long v3_dma_clean_range .long v3_dma_flush_range diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index 3668611cb400..5c7da3e372e9 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -82,14 +82,15 @@ ENTRY(v4_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(v4_flush_kern_dcache_page) +ENTRY(v4_flush_kern_dcache_area) /* FALLTHROUGH */ /* @@ -141,7 +142,7 @@ ENTRY(v4_cache_fns) .long v4_flush_user_cache_range .long v4_coherent_kern_range .long v4_coherent_user_range - .long v4_flush_kern_dcache_page + .long v4_flush_kern_dcache_area .long v4_dma_inv_range .long v4_dma_clean_range .long v4_dma_flush_range diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S index 2ebc1b3bf856..3dbedf1ec0e7 100644 --- a/arch/arm/mm/cache-v4wb.S +++ b/arch/arm/mm/cache-v4wb.S @@ -114,15 +114,16 @@ ENTRY(v4wb_flush_user_cache_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(v4wb_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(v4wb_flush_kern_dcache_area) + add r1, r0, r1 /* fall through */ /* @@ -224,7 +225,7 @@ ENTRY(v4wb_cache_fns) .long v4wb_flush_user_cache_range .long v4wb_coherent_kern_range .long v4wb_coherent_user_range - .long v4wb_flush_kern_dcache_page + .long v4wb_flush_kern_dcache_area .long v4wb_dma_inv_range .long v4wb_dma_clean_range .long v4wb_dma_flush_range diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index c54fa2cc40e6..b3b7410270b4 100644 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -117,17 +117,18 @@ ENTRY(v4wt_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(v4wt_flush_kern_dcache_page) +ENTRY(v4wt_flush_kern_dcache_area) mov r2, #0 mcr p15, 0, r2, c7, c5, 0 @ invalidate I cache - add r1, r0, #PAGE_SZ + add r1, r0, r1 /* fallthrough */ /* @@ -180,7 +181,7 @@ ENTRY(v4wt_cache_fns) .long v4wt_flush_user_cache_range .long v4wt_coherent_kern_range .long v4wt_coherent_user_range - .long v4wt_flush_kern_dcache_page + .long v4wt_flush_kern_dcache_area .long v4wt_dma_inv_range .long v4wt_dma_clean_range .long v4wt_dma_flush_range diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 295e25dd6381..4ba0a24ce6f5 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -159,15 +159,16 @@ ENDPROC(v6_coherent_user_range) ENDPROC(v6_coherent_kern_range) /* - * v6_flush_kern_dcache_page(kaddr) + * v6_flush_kern_dcache_area(void *addr, size_t size) * * Ensure that the data held in the page kaddr is written back * to the page in question. * - * - kaddr - kernel address (guaranteed to be page aligned) + * - addr - kernel address + * - size - region size */ -ENTRY(v6_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(v6_flush_kern_dcache_area) + add r1, r0, r1 1: #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line @@ -271,7 +272,7 @@ ENTRY(v6_cache_fns) .long v6_flush_user_cache_range .long v6_coherent_kern_range .long v6_coherent_user_range - .long v6_flush_kern_dcache_page + .long v6_flush_kern_dcache_area .long v6_dma_inv_range .long v6_dma_clean_range .long v6_dma_flush_range diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index e1bd9759617f..9073db849fb4 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -186,16 +186,17 @@ ENDPROC(v7_coherent_kern_range) ENDPROC(v7_coherent_user_range) /* - * v7_flush_kern_dcache_page(kaddr) + * v7_flush_kern_dcache_area(void *addr, size_t size) * * Ensure that the data held in the page kaddr is written back * to the page in question. * - * - kaddr - kernel address (guaranteed to be page aligned) + * - addr - kernel address + * - size - region size */ -ENTRY(v7_flush_kern_dcache_page) +ENTRY(v7_flush_kern_dcache_area) dcache_line_size r2, r3 - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -203,7 +204,7 @@ ENTRY(v7_flush_kern_dcache_page) blo 1b dsb mov pc, lr -ENDPROC(v7_flush_kern_dcache_page) +ENDPROC(v7_flush_kern_dcache_area) /* * v7_dma_inv_range(start,end) @@ -279,7 +280,7 @@ ENTRY(v7_cache_fns) .long v7_flush_user_cache_range .long v7_coherent_kern_range .long v7_coherent_user_range - .long v7_flush_kern_dcache_page + .long v7_flush_kern_dcache_area .long v7_dma_inv_range .long v7_dma_clean_range .long v7_dma_flush_range diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 329594e760cd..6f3a4b7a3b82 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -131,7 +131,7 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page) */ if (addr) #endif - __cpuc_flush_dcache_page(addr); + __cpuc_flush_dcache_area(addr, PAGE_SIZE); /* * If this is a page cache page, and we have an aliasing VIPT cache, @@ -258,5 +258,5 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l * in this mapping of the page. FIXME: this is overkill * since we actually ask for a write-back and invalidate. */ - __cpuc_flush_dcache_page(page_address(page)); + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 30f82fb5918c..2be1ec7c1b41 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -79,7 +79,7 @@ void kunmap_atomic(void *kvaddr, enum km_type type) unsigned int idx = type + KM_TYPE_NR * smp_processor_id(); if (kvaddr >= (void *)FIXADDR_START) { - __cpuc_flush_dcache_page((void *)vaddr); + __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE); #ifdef CONFIG_DEBUG_HIGHMEM BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); set_pte_ext(TOP_PTE(vaddr), __pte(0), 0); diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 900811cc9130..374a8311bc84 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -61,7 +61,7 @@ void setup_mm_for_reboot(char mode) void flush_dcache_page(struct page *page) { - __cpuc_flush_dcache_page(page_address(page)); + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } EXPORT_SYMBOL(flush_dcache_page); diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index d9fb4b98c49f..8012e24282b2 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -231,17 +231,18 @@ ENTRY(arm1020_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1020_flush_kern_dcache_page) +ENTRY(arm1020_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry mcr p15, 0, ip, c7, c10, 4 @ drain WB add r0, r0, #CACHE_DLINESIZE @@ -335,7 +336,7 @@ ENTRY(arm1020_cache_fns) .long arm1020_flush_user_cache_range .long arm1020_coherent_kern_range .long arm1020_coherent_user_range - .long arm1020_flush_kern_dcache_page + .long arm1020_flush_kern_dcache_area .long arm1020_dma_inv_range .long arm1020_dma_clean_range .long arm1020_dma_flush_range diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 7453b75dcea5..41fe25d234f5 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -225,17 +225,18 @@ ENTRY(arm1020e_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1020e_flush_kern_dcache_page) +ENTRY(arm1020e_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -321,7 +322,7 @@ ENTRY(arm1020e_cache_fns) .long arm1020e_flush_user_cache_range .long arm1020e_coherent_kern_range .long arm1020e_coherent_user_range - .long arm1020e_flush_kern_dcache_page + .long arm1020e_flush_kern_dcache_area .long arm1020e_dma_inv_range .long arm1020e_dma_clean_range .long arm1020e_dma_flush_range diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 8eb72d75a8b6..20a5b1b31a70 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -214,17 +214,18 @@ ENTRY(arm1022_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1022_flush_kern_dcache_page) +ENTRY(arm1022_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -310,7 +311,7 @@ ENTRY(arm1022_cache_fns) .long arm1022_flush_user_cache_range .long arm1022_coherent_kern_range .long arm1022_coherent_user_range - .long arm1022_flush_kern_dcache_page + .long arm1022_flush_kern_dcache_area .long arm1022_dma_inv_range .long arm1022_dma_clean_range .long arm1022_dma_flush_range diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 3b59f0d67139..96aedb10fcc4 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -208,17 +208,18 @@ ENTRY(arm1026_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1026_flush_kern_dcache_page) +ENTRY(arm1026_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -304,7 +305,7 @@ ENTRY(arm1026_cache_fns) .long arm1026_flush_user_cache_range .long arm1026_coherent_kern_range .long arm1026_coherent_user_range - .long arm1026_flush_kern_dcache_page + .long arm1026_flush_kern_dcache_area .long arm1026_dma_inv_range .long arm1026_dma_clean_range .long arm1026_dma_flush_range diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 2b7c197cc58d..471669e2d7cb 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -207,15 +207,16 @@ ENTRY(arm920_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm920_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm920_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -293,7 +294,7 @@ ENTRY(arm920_cache_fns) .long arm920_flush_user_cache_range .long arm920_coherent_kern_range .long arm920_coherent_user_range - .long arm920_flush_kern_dcache_page + .long arm920_flush_kern_dcache_area .long arm920_dma_inv_range .long arm920_dma_clean_range .long arm920_dma_flush_range diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 06a1aa4e3398..ee111b00fa41 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -209,15 +209,16 @@ ENTRY(arm922_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm922_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm922_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -295,7 +296,7 @@ ENTRY(arm922_cache_fns) .long arm922_flush_user_cache_range .long arm922_coherent_kern_range .long arm922_coherent_user_range - .long arm922_flush_kern_dcache_page + .long arm922_flush_kern_dcache_area .long arm922_dma_inv_range .long arm922_dma_clean_range .long arm922_dma_flush_range diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index cb53435a85ae..8deb5bde58e4 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -251,15 +251,16 @@ ENTRY(arm925_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm925_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm925_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -346,7 +347,7 @@ ENTRY(arm925_cache_fns) .long arm925_flush_user_cache_range .long arm925_coherent_kern_range .long arm925_coherent_user_range - .long arm925_flush_kern_dcache_page + .long arm925_flush_kern_dcache_area .long arm925_dma_inv_range .long arm925_dma_clean_range .long arm925_dma_flush_range diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 1c4848704bb3..64db6e275a44 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -214,15 +214,16 @@ ENTRY(arm926_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm926_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm926_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -309,7 +310,7 @@ ENTRY(arm926_cache_fns) .long arm926_flush_user_cache_range .long arm926_coherent_kern_range .long arm926_coherent_user_range - .long arm926_flush_kern_dcache_page + .long arm926_flush_kern_dcache_area .long arm926_dma_inv_range .long arm926_dma_clean_range .long arm926_dma_flush_range diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 5b0f8464c8f2..8196b9f401fb 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -141,14 +141,15 @@ ENTRY(arm940_coherent_user_range) /* FALLTHROUGH */ /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm940_flush_kern_dcache_page) +ENTRY(arm940_flush_kern_dcache_area) mov ip, #0 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments 1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries @@ -238,7 +239,7 @@ ENTRY(arm940_cache_fns) .long arm940_flush_user_cache_range .long arm940_coherent_kern_range .long arm940_coherent_user_range - .long arm940_flush_kern_dcache_page + .long arm940_flush_kern_dcache_area .long arm940_dma_inv_range .long arm940_dma_clean_range .long arm940_dma_flush_range diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 40c0449a139b..9a951239c86c 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -183,16 +183,17 @@ ENTRY(arm946_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size * (same as arm926) */ -ENTRY(arm946_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm946_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -280,7 +281,7 @@ ENTRY(arm946_cache_fns) .long arm946_flush_user_cache_range .long arm946_coherent_kern_range .long arm946_coherent_user_range - .long arm946_flush_kern_dcache_page + .long arm946_flush_kern_dcache_area .long arm946_dma_inv_range .long arm946_dma_clean_range .long arm946_dma_flush_range diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index d0d7795200fc..dbc39383e66a 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -226,16 +226,17 @@ ENTRY(feroceon_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ .align 5 -ENTRY(feroceon_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(feroceon_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -246,7 +247,7 @@ ENTRY(feroceon_flush_kern_dcache_page) mov pc, lr .align 5 -ENTRY(feroceon_range_flush_kern_dcache_page) +ENTRY(feroceon_range_flush_kern_dcache_area) mrs r2, cpsr add r1, r0, #PAGE_SZ - CACHE_DLINESIZE @ top addr is inclusive orr r3, r2, #PSR_I_BIT @@ -372,7 +373,7 @@ ENTRY(feroceon_cache_fns) .long feroceon_flush_user_cache_range .long feroceon_coherent_kern_range .long feroceon_coherent_user_range - .long feroceon_flush_kern_dcache_page + .long feroceon_flush_kern_dcache_area .long feroceon_dma_inv_range .long feroceon_dma_clean_range .long feroceon_dma_flush_range @@ -383,7 +384,7 @@ ENTRY(feroceon_range_cache_fns) .long feroceon_flush_user_cache_range .long feroceon_coherent_kern_range .long feroceon_coherent_user_range - .long feroceon_range_flush_kern_dcache_page + .long feroceon_range_flush_kern_dcache_area .long feroceon_range_dma_inv_range .long feroceon_range_dma_clean_range .long feroceon_range_dma_flush_range diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 52b5fd74fbb3..9674d36cc97d 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -186,15 +186,16 @@ ENTRY(mohawk_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(mohawk_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(mohawk_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -273,7 +274,7 @@ ENTRY(mohawk_cache_fns) .long mohawk_flush_user_cache_range .long mohawk_coherent_kern_range .long mohawk_coherent_user_range - .long mohawk_flush_kern_dcache_page + .long mohawk_flush_kern_dcache_area .long mohawk_dma_inv_range .long mohawk_dma_clean_range .long mohawk_dma_flush_range diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index f604aa8acae9..3e6210b4d6d4 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -27,7 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all); EXPORT_SYMBOL(__cpuc_flush_user_all); EXPORT_SYMBOL(__cpuc_flush_user_range); EXPORT_SYMBOL(__cpuc_coherent_kern_range); -EXPORT_SYMBOL(__cpuc_flush_dcache_page); +EXPORT_SYMBOL(__cpuc_flush_dcache_area); #else EXPORT_SYMBOL(cpu_cache); #endif diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index fab134e29826..96456f548798 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -226,15 +226,16 @@ ENTRY(xsc3_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache. * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(xsc3_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(xsc3_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line add r0, r0, #CACHELINESIZE cmp r0, r1 @@ -309,7 +310,7 @@ ENTRY(xsc3_cache_fns) .long xsc3_flush_user_cache_range .long xsc3_coherent_kern_range .long xsc3_coherent_user_range - .long xsc3_flush_kern_dcache_page + .long xsc3_flush_kern_dcache_area .long xsc3_dma_inv_range .long xsc3_dma_clean_range .long xsc3_dma_flush_range diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index f056c283682d..93df47265f2d 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -284,15 +284,16 @@ ENTRY(xscale_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(xscale_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(xscale_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry add r0, r0, #CACHELINESIZE @@ -368,7 +369,7 @@ ENTRY(xscale_cache_fns) .long xscale_flush_user_cache_range .long xscale_coherent_kern_range .long xscale_coherent_user_range - .long xscale_flush_kern_dcache_page + .long xscale_flush_kern_dcache_area .long xscale_dma_inv_range .long xscale_dma_clean_range .long xscale_dma_flush_range @@ -392,7 +393,7 @@ ENTRY(xscale_80200_A0_A1_cache_fns) .long xscale_flush_user_cache_range .long xscale_coherent_kern_range .long xscale_coherent_user_range - .long xscale_flush_kern_dcache_page + .long xscale_flush_kern_dcache_area .long xscale_dma_flush_range .long xscale_dma_clean_range .long xscale_dma_flush_range -- GitLab From f74f7e57ae9fa12b2951ae62ce3557799b318399 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 26 Nov 2009 12:31:15 +0000 Subject: [PATCH 106/618] ARM: use flush_kernel_dcache_area() for dmabounce After copying data from the bounce buffer to the real buffer, use flush_kernel_dcache_page() to ensure that data is written back in manner coherent with future userspace mappings. Signed-off-by: Russell King --- arch/arm/common/dmabounce.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 5a375e5fef21..bc90364a96c7 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -308,15 +308,11 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr, memcpy(ptr, buf->safe, size); /* - * DMA buffers must have the same cache properties - * as if they were really used for DMA - which means - * data must be written back to RAM. Note that - * we don't use dmac_flush_range() here for the - * bidirectional case because we know the cache - * lines will be coherent with the data written. + * Since we may have written to a page cache page, + * we need to ensure that the data will be coherent + * with user mappings. */ - dmac_clean_range(ptr, ptr + size); - outer_clean_range(__pa(ptr), __pa(ptr) + size); + __cpuc_flush_kernel_dcache_area(ptr, size); } free_safe_buffer(dev->archdata.dmabounce, buf); } -- GitLab From 5fe85be081edf0ac92d83f9c39e0ab5c1371eb82 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 9 Dec 2009 10:14:58 +0000 Subject: [PATCH 107/618] sched: Use rcu in sys_sched_getscheduler/sys_sched_getparam() read_lock(&tasklist_lock) does not protect sys_sched_getscheduler and sys_sched_getparam() against a concurrent update of the policy or scheduler parameters as do_sched_setscheduler() does not take the tasklist_lock. The accessed integers can be retrieved w/o locking and are snapshots anyway. Using rcu_read_lock() to protect find_task_by_vpid() and prevent the task struct from going away is not changing the above situation. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra LKML-Reference: <20091209100706.753790977@linutronix.de> Signed-off-by: Ingo Molnar --- kernel/sched.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 258c73c6a2f3..1782beed2fa7 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6458,7 +6458,7 @@ SYSCALL_DEFINE1(sched_getscheduler, pid_t, pid) return -EINVAL; retval = -ESRCH; - read_lock(&tasklist_lock); + rcu_read_lock(); p = find_process_by_pid(pid); if (p) { retval = security_task_getscheduler(p); @@ -6466,7 +6466,7 @@ SYSCALL_DEFINE1(sched_getscheduler, pid_t, pid) retval = p->policy | (p->sched_reset_on_fork ? SCHED_RESET_ON_FORK : 0); } - read_unlock(&tasklist_lock); + rcu_read_unlock(); return retval; } @@ -6484,7 +6484,7 @@ SYSCALL_DEFINE2(sched_getparam, pid_t, pid, struct sched_param __user *, param) if (!param || pid < 0) return -EINVAL; - read_lock(&tasklist_lock); + rcu_read_lock(); p = find_process_by_pid(pid); retval = -ESRCH; if (!p) @@ -6495,7 +6495,7 @@ SYSCALL_DEFINE2(sched_getparam, pid_t, pid, struct sched_param __user *, param) goto out_unlock; lp.sched_priority = p->rt_priority; - read_unlock(&tasklist_lock); + rcu_read_unlock(); /* * This one might sleep, we cannot do it with a spinlock held ... @@ -6505,7 +6505,7 @@ SYSCALL_DEFINE2(sched_getparam, pid_t, pid, struct sched_param __user *, param) return retval; out_unlock: - read_unlock(&tasklist_lock); + rcu_read_unlock(); return retval; } -- GitLab From 23f5d142519621b16cf2b378cf8adf4dcf01a616 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 9 Dec 2009 10:15:01 +0000 Subject: [PATCH 108/618] sched: Use rcu in sched_get/set_affinity() tasklist_lock is held read locked to protect the find_task_by_vpid() call and to prevent the task going away. sched_setaffinity acquires a task struct ref and drops tasklist lock right away. The access to the cpus_allowed mask is protected by rq->lock. rcu_read_lock() provides the same protection here. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra LKML-Reference: <20091209100706.789059966@linutronix.de> Signed-off-by: Ingo Molnar --- kernel/sched.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 1782beed2fa7..79893123325c 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6516,22 +6516,18 @@ long sched_setaffinity(pid_t pid, const struct cpumask *in_mask) int retval; get_online_cpus(); - read_lock(&tasklist_lock); + rcu_read_lock(); p = find_process_by_pid(pid); if (!p) { - read_unlock(&tasklist_lock); + rcu_read_unlock(); put_online_cpus(); return -ESRCH; } - /* - * It is not safe to call set_cpus_allowed with the - * tasklist_lock held. We will bump the task_struct's - * usage count and then drop tasklist_lock. - */ + /* Prevent p going away */ get_task_struct(p); - read_unlock(&tasklist_lock); + rcu_read_unlock(); if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) { retval = -ENOMEM; @@ -6617,7 +6613,7 @@ long sched_getaffinity(pid_t pid, struct cpumask *mask) int retval; get_online_cpus(); - read_lock(&tasklist_lock); + rcu_read_lock(); retval = -ESRCH; p = find_process_by_pid(pid); @@ -6633,7 +6629,7 @@ long sched_getaffinity(pid_t pid, struct cpumask *mask) task_rq_unlock(rq, &flags); out_unlock: - read_unlock(&tasklist_lock); + rcu_read_unlock(); put_online_cpus(); return retval; -- GitLab From 1a551ae715825bb2a2107a2dd68de024a1fa4e32 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 9 Dec 2009 10:15:11 +0000 Subject: [PATCH 109/618] sched: Use rcu in sched_get_rr_param() read_lock(&tasklist_lock) does not protect sys_sched_get_rr_param() against a concurrent update of the policy or scheduler parameters as do_sched_scheduler() does not take the tasklist_lock. The access to task->sched_class->get_rr_interval is protected by task_rq_lock(task). Use rcu_read_lock() to protect find_task_by_vpid() and prevent the task struct from going away. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra LKML-Reference: <20091209100706.862897167@linutronix.de> Signed-off-by: Ingo Molnar --- kernel/sched.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 79893123325c..db5c26692dd5 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6873,7 +6873,7 @@ SYSCALL_DEFINE2(sched_rr_get_interval, pid_t, pid, return -EINVAL; retval = -ESRCH; - read_lock(&tasklist_lock); + rcu_read_lock(); p = find_process_by_pid(pid); if (!p) goto out_unlock; @@ -6886,13 +6886,13 @@ SYSCALL_DEFINE2(sched_rr_get_interval, pid_t, pid, time_slice = p->sched_class->get_rr_interval(rq, p); task_rq_unlock(rq, &flags); - read_unlock(&tasklist_lock); + rcu_read_unlock(); jiffies_to_timespec(time_slice, &t); retval = copy_to_user(interval, &t, sizeof(t)) ? -EFAULT : 0; return retval; out_unlock: - read_unlock(&tasklist_lock); + rcu_read_unlock(); return retval; } -- GitLab From b9f8fcd55bbdb037e5332dbdb7b494f0b70861ac Mon Sep 17 00:00:00 2001 From: David Miller Date: Sun, 13 Dec 2009 18:25:02 -0800 Subject: [PATCH 110/618] sched: Fix cpu_clock() in NMIs, on !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK Relax stable-sched-clock architectures to not save/disable/restore hardirqs in cpu_clock(). The background is that I was trying to resolve a sparc64 perf issue when I discovered this problem. On sparc64 I implement pseudo NMIs by simply running the kernel at IRQ level 14 when local_irq_disable() is called, this allows performance counter events to still come in at IRQ level 15. This doesn't work if any code in an NMI handler does local_irq_save() or local_irq_disable() since the "disable" will kick us back to cpu IRQ level 14 thus letting NMIs back in and we recurse. The only path which that does that in the perf event IRQ handling path is the code supporting frequency based events. It uses cpu_clock(). cpu_clock() simply invokes sched_clock() with IRQs disabled. And that's a fundamental bug all on it's own, particularly for the HAVE_UNSTABLE_SCHED_CLOCK case. NMIs can thus get into the sched_clock() code interrupting the local IRQ disable code sections of it. Furthermore, for the not-HAVE_UNSTABLE_SCHED_CLOCK case, the IRQ disabling done by cpu_clock() is just pure overhead and completely unnecessary. So the core problem is that sched_clock() is not NMI safe, but we are invoking it from NMI contexts in the perf events code (via cpu_clock()). A less important issue is the overhead of IRQ disabling when it isn't necessary in cpu_clock(). CONFIG_HAVE_UNSTABLE_SCHED_CLOCK architectures are not affected by this patch. Signed-off-by: David S. Miller Acked-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091213.182502.215092085.davem@davemloft.net> Signed-off-by: Ingo Molnar --- kernel/sched_clock.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index 479ce5682d7c..5b496132c28a 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -236,6 +236,18 @@ void sched_clock_idle_wakeup_event(u64 delta_ns) } EXPORT_SYMBOL_GPL(sched_clock_idle_wakeup_event); +unsigned long long cpu_clock(int cpu) +{ + unsigned long long clock; + unsigned long flags; + + local_irq_save(flags); + clock = sched_clock_cpu(cpu); + local_irq_restore(flags); + + return clock; +} + #else /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */ void sched_clock_init(void) @@ -251,17 +263,12 @@ u64 sched_clock_cpu(int cpu) return sched_clock(); } -#endif /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */ unsigned long long cpu_clock(int cpu) { - unsigned long long clock; - unsigned long flags; + return sched_clock_cpu(cpu); +} - local_irq_save(flags); - clock = sched_clock_cpu(cpu); - local_irq_restore(flags); +#endif /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */ - return clock; -} EXPORT_SYMBOL_GPL(cpu_clock); -- GitLab From 1cf86f6f9b000e98c1b7f866f99633ae67464e2f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 15 Dec 2009 15:54:21 +0900 Subject: [PATCH 111/618] ASoC: ak4642: Add default return value in ak4642_modinit If ak4642 driver was compiled without I2C configs, ak4642_modinit return value will become un-stable. This patch modify this bug Reported-by: Magnus Damm Signed-off-by: Kuninori Morimoto Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/ak4642.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c index b69861d52161..3ef16bbc8c83 100644 --- a/sound/soc/codecs/ak4642.c +++ b/sound/soc/codecs/ak4642.c @@ -470,7 +470,7 @@ EXPORT_SYMBOL_GPL(soc_codec_dev_ak4642); static int __init ak4642_modinit(void) { - int ret; + int ret = 0; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) ret = i2c_add_driver(&ak4642_i2c_driver); #endif -- GitLab From 35358281bbc527cd4b0a8d39266c9ad554643e9f Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 15 Dec 2009 10:34:12 -0800 Subject: [PATCH 112/618] omap3: Allow EHCI to be built on OMAP3 OMAP34XX has EHCI, so select USB_ARCH_HAS_EHCI. Signed-off-by: Olof Johansson Acked-by: Anand Gadiyar Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 76c11ee113e9..10eafa70a909 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -18,6 +18,7 @@ config ARCH_OMAP2430 config ARCH_OMAP34XX bool "OMAP34xx Based System" depends on ARCH_OMAP3 + select USB_ARCH_HAS_EHCI config ARCH_OMAP3430 bool "OMAP3430 support" -- GitLab From c1e7c3ae59b065bf7ff24a05cb609b2f9e314db6 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Mon, 14 Dec 2009 21:45:19 +0000 Subject: [PATCH 113/618] bzip2/lzma/gzip: pre-boot malloc doesn't return NULL on failure The trivial malloc implementation used in the pre-boot environment by the decompressors returns a bad pointer on failure (falling through after calling error). This is doubly wrong - the callers expect malloc to return NULL on failure, second the error function is intended to be used by the decompressors to propagate errors to *their* callers. The decompressors have no access to any state set by the error function. Signed-off-by: Phillip Lougher LKML-Reference: <4b26b1ef.hIInb2AYPMtImAJO%phillip@lougher.demon.co.uk> Signed-off-by: H. Peter Anvin --- include/linux/decompress/mm.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/decompress/mm.h b/include/linux/decompress/mm.h index 12ff8c3f1d05..5032b9a31ae7 100644 --- a/include/linux/decompress/mm.h +++ b/include/linux/decompress/mm.h @@ -25,7 +25,7 @@ static void *malloc(int size) void *p; if (size < 0) - error("Malloc error"); + return NULL; if (!malloc_ptr) malloc_ptr = free_mem_ptr; @@ -35,7 +35,7 @@ static void *malloc(int size) malloc_ptr += size; if (free_mem_end_ptr && malloc_ptr >= free_mem_end_ptr) - error("Out of memory"); + return NULL; malloc_count++; return p; -- GitLab From d4529862cae4de19fda8d4bbcbddc60f3e48a4cf Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Mon, 14 Dec 2009 21:45:19 +0000 Subject: [PATCH 114/618] bzip2: Add missing checks for malloc returning NULL Signed-off-by: Phillip Lougher LKML-Reference: <4b26b1ef.ln20bM9Mn4gzB21L%phillip@lougher.demon.co.uk> Signed-off-by: H. Peter Anvin --- lib/decompress_bunzip2.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/lib/decompress_bunzip2.c b/lib/decompress_bunzip2.c index 76074209f9a2..a4e971dee102 100644 --- a/lib/decompress_bunzip2.c +++ b/lib/decompress_bunzip2.c @@ -637,6 +637,8 @@ static int INIT start_bunzip(struct bunzip_data **bdp, void *inbuf, int len, /* Allocate bunzip_data. Most fields initialize to zero. */ bd = *bdp = malloc(i); + if (!bd) + return RETVAL_OUT_OF_MEMORY; memset(bd, 0, sizeof(struct bunzip_data)); /* Setup input buffer */ bd->inbuf = inbuf; @@ -664,6 +666,8 @@ static int INIT start_bunzip(struct bunzip_data **bdp, void *inbuf, int len, bd->dbufSize = 100000*(i-BZh0); bd->dbuf = large_malloc(bd->dbufSize * sizeof(int)); + if (!bd->dbuf) + return RETVAL_OUT_OF_MEMORY; return RETVAL_OK; } @@ -686,7 +690,7 @@ STATIC int INIT bunzip2(unsigned char *buf, int len, if (!outbuf) { error("Could not allocate output bufer"); - return -1; + return RETVAL_OUT_OF_MEMORY; } if (buf) inbuf = buf; @@ -694,6 +698,7 @@ STATIC int INIT bunzip2(unsigned char *buf, int len, inbuf = malloc(BZIP2_IOBUF_SIZE); if (!inbuf) { error("Could not allocate input bufer"); + i = RETVAL_OUT_OF_MEMORY; goto exit_0; } i = start_bunzip(&bd, inbuf, len, fill); @@ -720,11 +725,14 @@ STATIC int INIT bunzip2(unsigned char *buf, int len, } else if (i == RETVAL_UNEXPECTED_OUTPUT_EOF) { error("Compressed file ends unexpectedly"); } + if (!bd) + goto exit_1; if (bd->dbuf) large_free(bd->dbuf); if (pos) *pos = bd->inbufPos; free(bd); +exit_1: if (!buf) free(inbuf); exit_0: -- GitLab From 54291362d2a5738e1b0495df2abcb9e6b0563a3f Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Mon, 14 Dec 2009 21:45:19 +0000 Subject: [PATCH 115/618] initramfs: add missing decompressor error check The decompressors return error by calling a supplied error function, and/or by returning an error return value. The initramfs code, however, fails to check the exit code returned by the decompressor, and only checks the error status set by calling the error function. This patch adds a return code check and calls the error function. Signed-off-by: Phillip Lougher LKML-Reference: <4b26b1ef.0+ZWxT6886olqcSc%phillip@lougher.demon.co.uk> Signed-off-by: H. Peter Anvin --- init/initramfs.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/init/initramfs.c b/init/initramfs.c index 4c00edc59689..b37d34beb90b 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -413,7 +413,7 @@ static unsigned my_inptr; /* index of next byte to be processed in inbuf */ static char * __init unpack_to_rootfs(char *buf, unsigned len) { - int written; + int written, res; decompress_fn decompress; const char *compress_name; static __initdata char msg_buf[64]; @@ -445,10 +445,12 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len) } this_header = 0; decompress = decompress_method(buf, len, &compress_name); - if (decompress) - decompress(buf, len, NULL, flush_buffer, NULL, + if (decompress) { + res = decompress(buf, len, NULL, flush_buffer, NULL, &my_inptr, error); - else if (compress_name) { + if (res) + error("decompressor failed"); + } else if (compress_name) { if (!message) { snprintf(msg_buf, sizeof msg_buf, "compression method %s not configured", -- GitLab From 0b962d473af32ec334df271b54ff4973cb2b4c73 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 15 Dec 2009 15:13:07 -0800 Subject: [PATCH 116/618] x86, msr/cpuid: Register enough minors for the MSR and CPUID drivers register_chrdev() hardcodes registering 256 minors, presumably to avoid breaking old drivers. However, we need to register enough minors so that we have all possible CPUs. checkpatch warns on this patch, but the patch is correct: NR_CPUS here is a static *upper bound* on the *maximum CPU index* (not *number of CPUs!*) and that is what we want. Reported-and-tested-by: Russ Anderson Cc: Tejun Heo Cc: Alan Cox Cc: Takashi Iwai Cc: Alexander Viro Signed-off-by: H. Peter Anvin LKML-Reference: --- arch/x86/kernel/cpuid.c | 5 +++-- arch/x86/kernel/msr.c | 4 ++-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index 7ef24a796992..cb27fd6136c9 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -187,7 +187,8 @@ static int __init cpuid_init(void) int i, err = 0; i = 0; - if (register_chrdev(CPUID_MAJOR, "cpu/cpuid", &cpuid_fops)) { + if (__register_chrdev(CPUID_MAJOR, 0, NR_CPUS, + "cpu/cpuid", &cpuid_fops)) { printk(KERN_ERR "cpuid: unable to get major %d for cpuid\n", CPUID_MAJOR); err = -EBUSY; @@ -216,7 +217,7 @@ static int __init cpuid_init(void) } class_destroy(cpuid_class); out_chrdev: - unregister_chrdev(CPUID_MAJOR, "cpu/cpuid"); + __unregister_chrdev(CPUID_MAJOR, 0, NR_CPUS, "cpu/cpuid"); out: return err; } diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 572b07eee3f4..4bd93c9b2b27 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -246,7 +246,7 @@ static int __init msr_init(void) int i, err = 0; i = 0; - if (register_chrdev(MSR_MAJOR, "cpu/msr", &msr_fops)) { + if (__register_chrdev(MSR_MAJOR, 0, NR_CPUS, "cpu/msr", &msr_fops)) { printk(KERN_ERR "msr: unable to get major %d for msr\n", MSR_MAJOR); err = -EBUSY; @@ -274,7 +274,7 @@ static int __init msr_init(void) msr_device_destroy(i); class_destroy(msr_class); out_chrdev: - unregister_chrdev(MSR_MAJOR, "cpu/msr"); + __unregister_chrdev(MSR_MAJOR, 0, NR_CPUS, "cpu/msr"); out: return err; } -- GitLab From 8cef4e160d74920ad1725f58c89fd75ec4c4ac38 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 12 Nov 2009 09:33:26 +0000 Subject: [PATCH 117/618] Btrfs: Avoid superfluous tree-log writeout We allow two log transactions at a time, but use same flag to mark dirty tree-log btree blocks. So we may flush dirty blocks belonging to newer log transaction when committing a log transaction. This patch fixes the issue by using two flags to mark dirty tree-log btree blocks. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 6 +++--- fs/btrfs/extent-tree.c | 12 ++++++++++-- fs/btrfs/transaction.c | 21 +++++++++++---------- fs/btrfs/transaction.h | 6 +++--- fs/btrfs/tree-log.c | 33 ++++++++++++++++++++------------- 5 files changed, 47 insertions(+), 31 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 02b6afbd7450..101940fab9b3 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -980,12 +980,12 @@ int btrfs_free_log_root_tree(struct btrfs_trans_handle *trans, while (1) { ret = find_first_extent_bit(&log_root_tree->dirty_log_pages, - 0, &start, &end, EXTENT_DIRTY); + 0, &start, &end, EXTENT_DIRTY | EXTENT_NEW); if (ret) break; - clear_extent_dirty(&log_root_tree->dirty_log_pages, - start, end, GFP_NOFS); + clear_extent_bits(&log_root_tree->dirty_log_pages, start, end, + EXTENT_DIRTY | EXTENT_NEW, GFP_NOFS); } eb = fs_info->log_root_tree->node; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 94627c4cc193..4a86508ce473 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4919,8 +4919,16 @@ struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans, btrfs_set_buffer_uptodate(buf); if (root->root_key.objectid == BTRFS_TREE_LOG_OBJECTID) { - set_extent_dirty(&root->dirty_log_pages, buf->start, - buf->start + buf->len - 1, GFP_NOFS); + /* + * we allow two log transactions at a time, use different + * EXENT bit to differentiate dirty pages. + */ + if (root->log_transid % 2 == 0) + set_extent_dirty(&root->dirty_log_pages, buf->start, + buf->start + buf->len - 1, GFP_NOFS); + else + set_extent_new(&root->dirty_log_pages, buf->start, + buf->start + buf->len - 1, GFP_NOFS); } else { set_extent_dirty(&trans->transaction->dirty_pages, buf->start, buf->start + buf->len - 1, GFP_NOFS); diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index c207e8c32c9b..b7b22c344b66 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -354,7 +354,7 @@ int btrfs_end_transaction_throttle(struct btrfs_trans_handle *trans, * those extents are sent to disk but does not wait on them */ int btrfs_write_marked_extents(struct btrfs_root *root, - struct extent_io_tree *dirty_pages) + struct extent_io_tree *dirty_pages, int mark) { int ret; int err = 0; @@ -367,7 +367,7 @@ int btrfs_write_marked_extents(struct btrfs_root *root, while (1) { ret = find_first_extent_bit(dirty_pages, start, &start, &end, - EXTENT_DIRTY); + mark); if (ret) break; while (start <= end) { @@ -413,7 +413,7 @@ int btrfs_write_marked_extents(struct btrfs_root *root, * on all the pages and clear them from the dirty pages state tree */ int btrfs_wait_marked_extents(struct btrfs_root *root, - struct extent_io_tree *dirty_pages) + struct extent_io_tree *dirty_pages, int mark) { int ret; int err = 0; @@ -425,12 +425,12 @@ int btrfs_wait_marked_extents(struct btrfs_root *root, unsigned long index; while (1) { - ret = find_first_extent_bit(dirty_pages, 0, &start, &end, - EXTENT_DIRTY); + ret = find_first_extent_bit(dirty_pages, start, &start, &end, + mark); if (ret) break; - clear_extent_dirty(dirty_pages, start, end, GFP_NOFS); + clear_extent_bits(dirty_pages, start, end, mark, GFP_NOFS); while (start <= end) { index = start >> PAGE_CACHE_SHIFT; start = (u64)(index + 1) << PAGE_CACHE_SHIFT; @@ -460,13 +460,13 @@ int btrfs_wait_marked_extents(struct btrfs_root *root, * those extents are on disk for transaction or log commit */ int btrfs_write_and_wait_marked_extents(struct btrfs_root *root, - struct extent_io_tree *dirty_pages) + struct extent_io_tree *dirty_pages, int mark) { int ret; int ret2; - ret = btrfs_write_marked_extents(root, dirty_pages); - ret2 = btrfs_wait_marked_extents(root, dirty_pages); + ret = btrfs_write_marked_extents(root, dirty_pages, mark); + ret2 = btrfs_wait_marked_extents(root, dirty_pages, mark); return ret || ret2; } @@ -479,7 +479,8 @@ int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans, return filemap_write_and_wait(btree_inode->i_mapping); } return btrfs_write_and_wait_marked_extents(root, - &trans->transaction->dirty_pages); + &trans->transaction->dirty_pages, + EXTENT_DIRTY); } /* diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h index d4e3e7a6938c..93c7ccb33118 100644 --- a/fs/btrfs/transaction.h +++ b/fs/btrfs/transaction.h @@ -107,10 +107,10 @@ void btrfs_throttle(struct btrfs_root *root); int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans, struct btrfs_root *root); int btrfs_write_and_wait_marked_extents(struct btrfs_root *root, - struct extent_io_tree *dirty_pages); + struct extent_io_tree *dirty_pages, int mark); int btrfs_write_marked_extents(struct btrfs_root *root, - struct extent_io_tree *dirty_pages); + struct extent_io_tree *dirty_pages, int mark); int btrfs_wait_marked_extents(struct btrfs_root *root, - struct extent_io_tree *dirty_pages); + struct extent_io_tree *dirty_pages, int mark); int btrfs_transaction_in_commit(struct btrfs_fs_info *info); #endif diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 741666a7676a..31da0002e78b 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -1977,10 +1977,11 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans, { int index1; int index2; + int mark; int ret; struct btrfs_root *log = root->log_root; struct btrfs_root *log_root_tree = root->fs_info->log_root_tree; - u64 log_transid = 0; + unsigned long log_transid = 0; mutex_lock(&root->log_mutex); index1 = root->log_transid % 2; @@ -2014,24 +2015,29 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans, goto out; } + log_transid = root->log_transid; + if (log_transid % 2 == 0) + mark = EXTENT_DIRTY; + else + mark = EXTENT_NEW; + /* we start IO on all the marked extents here, but we don't actually * wait for them until later. */ - ret = btrfs_write_marked_extents(log, &log->dirty_log_pages); + ret = btrfs_write_marked_extents(log, &log->dirty_log_pages, mark); BUG_ON(ret); btrfs_set_root_node(&log->root_item, log->node); root->log_batch = 0; - log_transid = root->log_transid; root->log_transid++; log->log_transid = root->log_transid; root->log_start_pid = 0; smp_mb(); /* - * log tree has been flushed to disk, new modifications of - * the log will be written to new positions. so it's safe to - * allow log writers to go in. + * IO has been started, blocks of the log tree have WRITTEN flag set + * in their headers. new modifications of the log will be written to + * new positions. so it's safe to allow log writers to go in. */ mutex_unlock(&root->log_mutex); @@ -2052,7 +2058,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans, index2 = log_root_tree->log_transid % 2; if (atomic_read(&log_root_tree->log_commit[index2])) { - btrfs_wait_marked_extents(log, &log->dirty_log_pages); + btrfs_wait_marked_extents(log, &log->dirty_log_pages, mark); wait_log_commit(trans, log_root_tree, log_root_tree->log_transid); mutex_unlock(&log_root_tree->log_mutex); @@ -2072,16 +2078,17 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans, * check the full commit flag again */ if (root->fs_info->last_trans_log_full_commit == trans->transid) { - btrfs_wait_marked_extents(log, &log->dirty_log_pages); + btrfs_wait_marked_extents(log, &log->dirty_log_pages, mark); mutex_unlock(&log_root_tree->log_mutex); ret = -EAGAIN; goto out_wake_log_root; } ret = btrfs_write_and_wait_marked_extents(log_root_tree, - &log_root_tree->dirty_log_pages); + &log_root_tree->dirty_log_pages, + EXTENT_DIRTY | EXTENT_NEW); BUG_ON(ret); - btrfs_wait_marked_extents(log, &log->dirty_log_pages); + btrfs_wait_marked_extents(log, &log->dirty_log_pages, mark); btrfs_set_super_log_root(&root->fs_info->super_for_commit, log_root_tree->node->start); @@ -2147,12 +2154,12 @@ int btrfs_free_log(struct btrfs_trans_handle *trans, struct btrfs_root *root) while (1) { ret = find_first_extent_bit(&log->dirty_log_pages, - 0, &start, &end, EXTENT_DIRTY); + 0, &start, &end, EXTENT_DIRTY | EXTENT_NEW); if (ret) break; - clear_extent_dirty(&log->dirty_log_pages, - start, end, GFP_NOFS); + clear_extent_bits(&log->dirty_log_pages, start, end, + EXTENT_DIRTY | EXTENT_NEW, GFP_NOFS); } if (log->log_transid > 0) { -- GitLab From ad48fd754676bfae4139be1a897b1ea58f9aaf21 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 12 Nov 2009 09:33:58 +0000 Subject: [PATCH 118/618] Btrfs: Add btrfs_duplicate_item btrfs_duplicate_item duplicates item with new key, guaranteeing the source item and the new items are in the same tree leaf and contiguous. It allows us to split file extent in place, without using lock_extent to prevent bookend extent race. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 198 +++++++++++++++++++++++++++++++++-------------- fs/btrfs/ctree.h | 4 + 2 files changed, 143 insertions(+), 59 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index ec96f3a6d536..9d4ba3470c17 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -37,6 +37,11 @@ static int balance_node_right(struct btrfs_trans_handle *trans, struct extent_buffer *src_buf); static int del_ptr(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_path *path, int level, int slot); +static int setup_items_for_insert(struct btrfs_trans_handle *trans, + struct btrfs_root *root, struct btrfs_path *path, + struct btrfs_key *cpu_key, u32 *data_size, + u32 total_data, u32 total_size, int nr); + struct btrfs_path *btrfs_alloc_path(void) { @@ -2997,75 +3002,85 @@ static noinline int split_leaf(struct btrfs_trans_handle *trans, return ret; } -/* - * This function splits a single item into two items, - * giving 'new_key' to the new item and splitting the - * old one at split_offset (from the start of the item). - * - * The path may be released by this operation. After - * the split, the path is pointing to the old item. The - * new item is going to be in the same node as the old one. - * - * Note, the item being split must be smaller enough to live alone on - * a tree block with room for one extra struct btrfs_item - * - * This allows us to split the item in place, keeping a lock on the - * leaf the entire time. - */ -int btrfs_split_item(struct btrfs_trans_handle *trans, - struct btrfs_root *root, - struct btrfs_path *path, - struct btrfs_key *new_key, - unsigned long split_offset) +static noinline int setup_leaf_for_split(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_path *path, int ins_len) { - u32 item_size; + struct btrfs_key key; struct extent_buffer *leaf; - struct btrfs_key orig_key; - struct btrfs_item *item; - struct btrfs_item *new_item; - int ret = 0; - int slot; - u32 nritems; - u32 orig_offset; - struct btrfs_disk_key disk_key; - char *buf; + struct btrfs_file_extent_item *fi; + u64 extent_len = 0; + u32 item_size; + int ret; leaf = path->nodes[0]; - btrfs_item_key_to_cpu(leaf, &orig_key, path->slots[0]); - if (btrfs_leaf_free_space(root, leaf) >= sizeof(struct btrfs_item)) - goto split; + btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); + + BUG_ON(key.type != BTRFS_EXTENT_DATA_KEY && + key.type != BTRFS_EXTENT_CSUM_KEY); + + if (btrfs_leaf_free_space(root, leaf) >= ins_len) + return 0; item_size = btrfs_item_size_nr(leaf, path->slots[0]); + if (key.type == BTRFS_EXTENT_DATA_KEY) { + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); + extent_len = btrfs_file_extent_num_bytes(leaf, fi); + } btrfs_release_path(root, path); - path->search_for_split = 1; path->keep_locks = 1; - - ret = btrfs_search_slot(trans, root, &orig_key, path, 0, 1); + path->search_for_split = 1; + ret = btrfs_search_slot(trans, root, &key, path, 0, 1); path->search_for_split = 0; + if (ret < 0) + goto err; + ret = -EAGAIN; + leaf = path->nodes[0]; /* if our item isn't there or got smaller, return now */ - if (ret != 0 || item_size != btrfs_item_size_nr(path->nodes[0], - path->slots[0])) { - path->keep_locks = 0; - return -EAGAIN; + if (ret > 0 || item_size != btrfs_item_size_nr(leaf, path->slots[0])) + goto err; + + if (key.type == BTRFS_EXTENT_DATA_KEY) { + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); + if (extent_len != btrfs_file_extent_num_bytes(leaf, fi)) + goto err; } btrfs_set_path_blocking(path); - ret = split_leaf(trans, root, &orig_key, path, - sizeof(struct btrfs_item), 1); - path->keep_locks = 0; + ret = split_leaf(trans, root, &key, path, ins_len, 1); BUG_ON(ret); + path->keep_locks = 0; btrfs_unlock_up_safe(path, 1); + return 0; +err: + path->keep_locks = 0; + return ret; +} + +static noinline int split_item(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_path *path, + struct btrfs_key *new_key, + unsigned long split_offset) +{ + struct extent_buffer *leaf; + struct btrfs_item *item; + struct btrfs_item *new_item; + int slot; + char *buf; + u32 nritems; + u32 item_size; + u32 orig_offset; + struct btrfs_disk_key disk_key; + leaf = path->nodes[0]; BUG_ON(btrfs_leaf_free_space(root, leaf) < sizeof(struct btrfs_item)); -split: - /* - * make sure any changes to the path from split_leaf leave it - * in a blocking state - */ btrfs_set_path_blocking(path); item = btrfs_item_nr(leaf, path->slots[0]); @@ -3073,19 +3088,19 @@ int btrfs_split_item(struct btrfs_trans_handle *trans, item_size = btrfs_item_size(leaf, item); buf = kmalloc(item_size, GFP_NOFS); + if (!buf) + return -ENOMEM; + read_extent_buffer(leaf, buf, btrfs_item_ptr_offset(leaf, path->slots[0]), item_size); - slot = path->slots[0] + 1; - leaf = path->nodes[0]; + slot = path->slots[0] + 1; nritems = btrfs_header_nritems(leaf); - if (slot != nritems) { /* shift the items */ memmove_extent_buffer(leaf, btrfs_item_nr_offset(slot + 1), - btrfs_item_nr_offset(slot), - (nritems - slot) * sizeof(struct btrfs_item)); - + btrfs_item_nr_offset(slot), + (nritems - slot) * sizeof(struct btrfs_item)); } btrfs_cpu_key_to_disk(&disk_key, new_key); @@ -3113,15 +3128,80 @@ int btrfs_split_item(struct btrfs_trans_handle *trans, item_size - split_offset); btrfs_mark_buffer_dirty(leaf); - ret = 0; - if (btrfs_leaf_free_space(root, leaf) < 0) { - btrfs_print_leaf(root, leaf); - BUG(); - } + BUG_ON(btrfs_leaf_free_space(root, leaf) < 0); kfree(buf); + return 0; +} + +/* + * This function splits a single item into two items, + * giving 'new_key' to the new item and splitting the + * old one at split_offset (from the start of the item). + * + * The path may be released by this operation. After + * the split, the path is pointing to the old item. The + * new item is going to be in the same node as the old one. + * + * Note, the item being split must be smaller enough to live alone on + * a tree block with room for one extra struct btrfs_item + * + * This allows us to split the item in place, keeping a lock on the + * leaf the entire time. + */ +int btrfs_split_item(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_path *path, + struct btrfs_key *new_key, + unsigned long split_offset) +{ + int ret; + ret = setup_leaf_for_split(trans, root, path, + sizeof(struct btrfs_item)); + if (ret) + return ret; + + ret = split_item(trans, root, path, new_key, split_offset); return ret; } +/* + * This function duplicate a item, giving 'new_key' to the new item. + * It guarantees both items live in the same tree leaf and the new item + * is contiguous with the original item. + * + * This allows us to split file extent in place, keeping a lock on the + * leaf the entire time. + */ +int btrfs_duplicate_item(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_path *path, + struct btrfs_key *new_key) +{ + struct extent_buffer *leaf; + int ret; + u32 item_size; + + leaf = path->nodes[0]; + item_size = btrfs_item_size_nr(leaf, path->slots[0]); + ret = setup_leaf_for_split(trans, root, path, + item_size + sizeof(struct btrfs_item)); + if (ret) + return ret; + + path->slots[0]++; + ret = setup_items_for_insert(trans, root, path, new_key, &item_size, + item_size, item_size + + sizeof(struct btrfs_item), 1); + BUG_ON(ret); + + leaf = path->nodes[0]; + memcpy_extent_buffer(leaf, + btrfs_item_ptr_offset(leaf, path->slots[0]), + btrfs_item_ptr_offset(leaf, path->slots[0] - 1), + item_size); + return 0; +} + /* * make the item pointed to by the path smaller. new_size indicates * how small to make it, and from_end tells us if we just chop bytes diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 444b3e9b92a4..e3b58001162d 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2089,6 +2089,10 @@ int btrfs_split_item(struct btrfs_trans_handle *trans, struct btrfs_path *path, struct btrfs_key *new_key, unsigned long split_offset); +int btrfs_duplicate_item(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_path *path, + struct btrfs_key *new_key); int btrfs_search_slot(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_key *key, struct btrfs_path *p, int ins_len, int cow); -- GitLab From 920bbbfb05c9fce22e088d20eb9dcb8f96342de9 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 12 Nov 2009 09:34:08 +0000 Subject: [PATCH 119/618] Btrfs: Rewrite btrfs_drop_extents Rewrite btrfs_drop_extents by using btrfs_duplicate_item, so we can avoid calling lock_extent within transaction. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 7 +- fs/btrfs/file.c | 659 ++++++++++++++++++-------------------------- fs/btrfs/inode.c | 27 +- fs/btrfs/ioctl.c | 3 +- fs/btrfs/tree-log.c | 4 +- 5 files changed, 277 insertions(+), 423 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index e3b58001162d..ae5b0aaa9386 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2349,12 +2349,9 @@ int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end, int skip_pinned); int btrfs_check_file(struct btrfs_root *root, struct inode *inode); extern const struct file_operations btrfs_file_operations; -int btrfs_drop_extents(struct btrfs_trans_handle *trans, - struct btrfs_root *root, struct inode *inode, - u64 start, u64 end, u64 locked_end, - u64 inline_limit, u64 *hint_block, int drop_cache); +int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct inode *inode, + u64 start, u64 end, u64 *hint_byte, int drop_cache); int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, - struct btrfs_root *root, struct inode *inode, u64 start, u64 end); int btrfs_release_file(struct inode *inode, struct file *file); diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 06550affbd27..3d2e45ce5d25 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -265,319 +265,247 @@ int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end, * If an extent intersects the range but is not entirely inside the range * it is either truncated or split. Anything entirely inside the range * is deleted from the tree. - * - * inline_limit is used to tell this code which offsets in the file to keep - * if they contain inline extents. */ -noinline int btrfs_drop_extents(struct btrfs_trans_handle *trans, - struct btrfs_root *root, struct inode *inode, - u64 start, u64 end, u64 locked_end, - u64 inline_limit, u64 *hint_byte, int drop_cache) +int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct inode *inode, + u64 start, u64 end, u64 *hint_byte, int drop_cache) { - u64 extent_end = 0; - u64 search_start = start; - u64 ram_bytes = 0; - u64 disk_bytenr = 0; - u64 orig_locked_end = locked_end; - u8 compression; - u8 encryption; - u16 other_encoding = 0; + struct btrfs_root *root = BTRFS_I(inode)->root; struct extent_buffer *leaf; - struct btrfs_file_extent_item *extent; + struct btrfs_file_extent_item *fi; struct btrfs_path *path; struct btrfs_key key; - struct btrfs_file_extent_item old; - int keep; - int slot; - int bookend; - int found_type = 0; - int found_extent; - int found_inline; + struct btrfs_key new_key; + u64 search_start = start; + u64 disk_bytenr = 0; + u64 num_bytes = 0; + u64 extent_offset = 0; + u64 extent_end = 0; + int del_nr = 0; + int del_slot = 0; + int extent_type; int recow; int ret; - inline_limit = 0; if (drop_cache) btrfs_drop_extent_cache(inode, start, end - 1, 0); path = btrfs_alloc_path(); if (!path) return -ENOMEM; + while (1) { recow = 0; - btrfs_release_path(root, path); ret = btrfs_lookup_file_extent(trans, root, path, inode->i_ino, search_start, -1); if (ret < 0) - goto out; - if (ret > 0) { - if (path->slots[0] == 0) { - ret = 0; - goto out; - } - path->slots[0]--; + break; + if (ret > 0 && path->slots[0] > 0 && search_start == start) { + leaf = path->nodes[0]; + btrfs_item_key_to_cpu(leaf, &key, path->slots[0] - 1); + if (key.objectid == inode->i_ino && + key.type == BTRFS_EXTENT_DATA_KEY) + path->slots[0]--; } + ret = 0; next_slot: - keep = 0; - bookend = 0; - found_extent = 0; - found_inline = 0; - compression = 0; - encryption = 0; - extent = NULL; leaf = path->nodes[0]; - slot = path->slots[0]; - ret = 0; - btrfs_item_key_to_cpu(leaf, &key, slot); - if (btrfs_key_type(&key) == BTRFS_EXTENT_DATA_KEY && - key.offset >= end) { - goto out; - } - if (btrfs_key_type(&key) > BTRFS_EXTENT_DATA_KEY || - key.objectid != inode->i_ino) { - goto out; - } - if (recow) { - search_start = max(key.offset, start); - continue; - } - if (btrfs_key_type(&key) == BTRFS_EXTENT_DATA_KEY) { - extent = btrfs_item_ptr(leaf, slot, - struct btrfs_file_extent_item); - found_type = btrfs_file_extent_type(leaf, extent); - compression = btrfs_file_extent_compression(leaf, - extent); - encryption = btrfs_file_extent_encryption(leaf, - extent); - other_encoding = btrfs_file_extent_other_encoding(leaf, - extent); - if (found_type == BTRFS_FILE_EXTENT_REG || - found_type == BTRFS_FILE_EXTENT_PREALLOC) { - extent_end = - btrfs_file_extent_disk_bytenr(leaf, - extent); - if (extent_end) - *hint_byte = extent_end; - - extent_end = key.offset + - btrfs_file_extent_num_bytes(leaf, extent); - ram_bytes = btrfs_file_extent_ram_bytes(leaf, - extent); - found_extent = 1; - } else if (found_type == BTRFS_FILE_EXTENT_INLINE) { - found_inline = 1; - extent_end = key.offset + - btrfs_file_extent_inline_len(leaf, extent); + if (path->slots[0] >= btrfs_header_nritems(leaf)) { + BUG_ON(del_nr > 0); + ret = btrfs_next_leaf(root, path); + if (ret < 0) + break; + if (ret > 0) { + ret = 0; + break; } + leaf = path->nodes[0]; + recow = 1; + } + + btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); + if (key.objectid > inode->i_ino || + key.type > BTRFS_EXTENT_DATA_KEY || key.offset >= end) + break; + + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); + extent_type = btrfs_file_extent_type(leaf, fi); + + if (extent_type == BTRFS_FILE_EXTENT_REG || + extent_type == BTRFS_FILE_EXTENT_PREALLOC) { + disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi); + num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi); + extent_offset = btrfs_file_extent_offset(leaf, fi); + extent_end = key.offset + + btrfs_file_extent_num_bytes(leaf, fi); + } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) { + extent_end = key.offset + + btrfs_file_extent_inline_len(leaf, fi); } else { + WARN_ON(1); extent_end = search_start; } - /* we found nothing we can drop */ - if ((!found_extent && !found_inline) || - search_start >= extent_end) { - int nextret; - u32 nritems; - nritems = btrfs_header_nritems(leaf); - if (slot >= nritems - 1) { - nextret = btrfs_next_leaf(root, path); - if (nextret) - goto out; - recow = 1; - } else { - path->slots[0]++; - } + if (extent_end <= search_start) { + path->slots[0]++; goto next_slot; } - if (end <= extent_end && start >= key.offset && found_inline) - *hint_byte = EXTENT_MAP_INLINE; - - if (found_extent) { - read_extent_buffer(leaf, &old, (unsigned long)extent, - sizeof(old)); - } - - if (end < extent_end && end >= key.offset) { - bookend = 1; - if (found_inline && start <= key.offset) - keep = 1; + search_start = max(key.offset, start); + if (recow) { + btrfs_release_path(root, path); + continue; } - if (bookend && found_extent) { - if (locked_end < extent_end) { - ret = try_lock_extent(&BTRFS_I(inode)->io_tree, - locked_end, extent_end - 1, - GFP_NOFS); - if (!ret) { - btrfs_release_path(root, path); - lock_extent(&BTRFS_I(inode)->io_tree, - locked_end, extent_end - 1, - GFP_NOFS); - locked_end = extent_end; - continue; - } - locked_end = extent_end; + /* + * | - range to drop - | + * | -------- extent -------- | + */ + if (start > key.offset && end < extent_end) { + BUG_ON(del_nr > 0); + BUG_ON(extent_type == BTRFS_FILE_EXTENT_INLINE); + + memcpy(&new_key, &key, sizeof(new_key)); + new_key.offset = start; + ret = btrfs_duplicate_item(trans, root, path, + &new_key); + if (ret == -EAGAIN) { + btrfs_release_path(root, path); + continue; } - disk_bytenr = le64_to_cpu(old.disk_bytenr); - if (disk_bytenr != 0) { + if (ret < 0) + break; + + leaf = path->nodes[0]; + fi = btrfs_item_ptr(leaf, path->slots[0] - 1, + struct btrfs_file_extent_item); + btrfs_set_file_extent_num_bytes(leaf, fi, + start - key.offset); + + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); + + extent_offset += start - key.offset; + btrfs_set_file_extent_offset(leaf, fi, extent_offset); + btrfs_set_file_extent_num_bytes(leaf, fi, + extent_end - start); + btrfs_mark_buffer_dirty(leaf); + + if (disk_bytenr > 0) { ret = btrfs_inc_extent_ref(trans, root, - disk_bytenr, - le64_to_cpu(old.disk_num_bytes), 0, - root->root_key.objectid, - key.objectid, key.offset - - le64_to_cpu(old.offset)); + disk_bytenr, num_bytes, 0, + root->root_key.objectid, + new_key.objectid, + start - extent_offset); BUG_ON(ret); + *hint_byte = disk_bytenr; } + key.offset = start; } + /* + * | ---- range to drop ----- | + * | -------- extent -------- | + */ + if (start <= key.offset && end < extent_end) { + BUG_ON(extent_type == BTRFS_FILE_EXTENT_INLINE); + + memcpy(&new_key, &key, sizeof(new_key)); + new_key.offset = end; + btrfs_set_item_key_safe(trans, root, path, &new_key); - if (found_inline) { - u64 mask = root->sectorsize - 1; - search_start = (extent_end + mask) & ~mask; - } else - search_start = extent_end; - - /* truncate existing extent */ - if (start > key.offset) { - u64 new_num; - u64 old_num; - keep = 1; - WARN_ON(start & (root->sectorsize - 1)); - if (found_extent) { - new_num = start - key.offset; - old_num = btrfs_file_extent_num_bytes(leaf, - extent); - *hint_byte = - btrfs_file_extent_disk_bytenr(leaf, - extent); - if (btrfs_file_extent_disk_bytenr(leaf, - extent)) { - inode_sub_bytes(inode, old_num - - new_num); - } - btrfs_set_file_extent_num_bytes(leaf, - extent, new_num); - btrfs_mark_buffer_dirty(leaf); - } else if (key.offset < inline_limit && - (end > extent_end) && - (inline_limit < extent_end)) { - u32 new_size; - new_size = btrfs_file_extent_calc_inline_size( - inline_limit - key.offset); - inode_sub_bytes(inode, extent_end - - inline_limit); - btrfs_set_file_extent_ram_bytes(leaf, extent, - new_size); - if (!compression && !encryption) { - btrfs_truncate_item(trans, root, path, - new_size, 1); - } + extent_offset += end - key.offset; + btrfs_set_file_extent_offset(leaf, fi, extent_offset); + btrfs_set_file_extent_num_bytes(leaf, fi, + extent_end - end); + btrfs_mark_buffer_dirty(leaf); + if (disk_bytenr > 0) { + inode_sub_bytes(inode, end - key.offset); + *hint_byte = disk_bytenr; } + break; } - /* delete the entire extent */ - if (!keep) { - if (found_inline) - inode_sub_bytes(inode, extent_end - - key.offset); - ret = btrfs_del_item(trans, root, path); - /* TODO update progress marker and return */ - BUG_ON(ret); - extent = NULL; - btrfs_release_path(root, path); - /* the extent will be freed later */ - } - if (bookend && found_inline && start <= key.offset) { - u32 new_size; - new_size = btrfs_file_extent_calc_inline_size( - extent_end - end); - inode_sub_bytes(inode, end - key.offset); - btrfs_set_file_extent_ram_bytes(leaf, extent, - new_size); - if (!compression && !encryption) - ret = btrfs_truncate_item(trans, root, path, - new_size, 0); - BUG_ON(ret); - } - /* create bookend, splitting the extent in two */ - if (bookend && found_extent) { - struct btrfs_key ins; - ins.objectid = inode->i_ino; - ins.offset = end; - btrfs_set_key_type(&ins, BTRFS_EXTENT_DATA_KEY); - btrfs_release_path(root, path); - path->leave_spinning = 1; - ret = btrfs_insert_empty_item(trans, root, path, &ins, - sizeof(*extent)); - BUG_ON(ret); + search_start = extent_end; + /* + * | ---- range to drop ----- | + * | -------- extent -------- | + */ + if (start > key.offset && end >= extent_end) { + BUG_ON(del_nr > 0); + BUG_ON(extent_type == BTRFS_FILE_EXTENT_INLINE); - leaf = path->nodes[0]; - extent = btrfs_item_ptr(leaf, path->slots[0], - struct btrfs_file_extent_item); - write_extent_buffer(leaf, &old, - (unsigned long)extent, sizeof(old)); - - btrfs_set_file_extent_compression(leaf, extent, - compression); - btrfs_set_file_extent_encryption(leaf, extent, - encryption); - btrfs_set_file_extent_other_encoding(leaf, extent, - other_encoding); - btrfs_set_file_extent_offset(leaf, extent, - le64_to_cpu(old.offset) + end - key.offset); - WARN_ON(le64_to_cpu(old.num_bytes) < - (extent_end - end)); - btrfs_set_file_extent_num_bytes(leaf, extent, - extent_end - end); + btrfs_set_file_extent_num_bytes(leaf, fi, + start - key.offset); + btrfs_mark_buffer_dirty(leaf); + if (disk_bytenr > 0) { + inode_sub_bytes(inode, extent_end - start); + *hint_byte = disk_bytenr; + } + if (end == extent_end) + break; - /* - * set the ram bytes to the size of the full extent - * before splitting. This is a worst case flag, - * but its the best we can do because we don't know - * how splitting affects compression - */ - btrfs_set_file_extent_ram_bytes(leaf, extent, - ram_bytes); - btrfs_set_file_extent_type(leaf, extent, found_type); - - btrfs_unlock_up_safe(path, 1); - btrfs_mark_buffer_dirty(path->nodes[0]); - btrfs_set_lock_blocking(path->nodes[0]); - - path->leave_spinning = 0; - btrfs_release_path(root, path); - if (disk_bytenr != 0) - inode_add_bytes(inode, extent_end - end); + path->slots[0]++; + goto next_slot; } - if (found_extent && !keep) { - u64 old_disk_bytenr = le64_to_cpu(old.disk_bytenr); + /* + * | ---- range to drop ----- | + * | ------ extent ------ | + */ + if (start <= key.offset && end >= extent_end) { + if (del_nr == 0) { + del_slot = path->slots[0]; + del_nr = 1; + } else { + BUG_ON(del_slot + del_nr != path->slots[0]); + del_nr++; + } - if (old_disk_bytenr != 0) { + if (extent_type == BTRFS_FILE_EXTENT_INLINE) { inode_sub_bytes(inode, - le64_to_cpu(old.num_bytes)); + extent_end - key.offset); + extent_end = ALIGN(extent_end, + root->sectorsize); + } else if (disk_bytenr > 0) { ret = btrfs_free_extent(trans, root, - old_disk_bytenr, - le64_to_cpu(old.disk_num_bytes), - 0, root->root_key.objectid, + disk_bytenr, num_bytes, 0, + root->root_key.objectid, key.objectid, key.offset - - le64_to_cpu(old.offset)); + extent_offset); BUG_ON(ret); - *hint_byte = old_disk_bytenr; + inode_sub_bytes(inode, + extent_end - key.offset); + *hint_byte = disk_bytenr; } - } - if (search_start >= end) { - ret = 0; - goto out; + if (end == extent_end) + break; + + if (path->slots[0] + 1 < btrfs_header_nritems(leaf)) { + path->slots[0]++; + goto next_slot; + } + + ret = btrfs_del_items(trans, root, path, del_slot, + del_nr); + BUG_ON(ret); + + del_nr = 0; + del_slot = 0; + + btrfs_release_path(root, path); + continue; } + + BUG_ON(1); } -out: - btrfs_free_path(path); - if (locked_end > orig_locked_end) { - unlock_extent(&BTRFS_I(inode)->io_tree, orig_locked_end, - locked_end - 1, GFP_NOFS); + + if (del_nr > 0) { + ret = btrfs_del_items(trans, root, path, del_slot, del_nr); + BUG_ON(ret); } + + btrfs_free_path(path); return ret; } @@ -620,23 +548,23 @@ static int extent_mergeable(struct extent_buffer *leaf, int slot, * two or three. */ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, - struct btrfs_root *root, struct inode *inode, u64 start, u64 end) { + struct btrfs_root *root = BTRFS_I(inode)->root; struct extent_buffer *leaf; struct btrfs_path *path; struct btrfs_file_extent_item *fi; struct btrfs_key key; + struct btrfs_key new_key; u64 bytenr; u64 num_bytes; u64 extent_end; u64 orig_offset; u64 other_start; u64 other_end; - u64 split = start; - u64 locked_end = end; - int extent_type; - int split_end = 1; + u64 split; + int del_nr = 0; + int del_slot = 0; int ret; btrfs_drop_extent_cache(inode, start, end - 1, 0); @@ -644,12 +572,10 @@ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, path = btrfs_alloc_path(); BUG_ON(!path); again: + split = start; key.objectid = inode->i_ino; key.type = BTRFS_EXTENT_DATA_KEY; - if (split == start) - key.offset = split; - else - key.offset = split - 1; + key.offset = split; ret = btrfs_search_slot(trans, root, &key, path, -1, 1); if (ret > 0 && path->slots[0] > 0) @@ -661,8 +587,8 @@ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, key.type != BTRFS_EXTENT_DATA_KEY); fi = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_file_extent_item); - extent_type = btrfs_file_extent_type(leaf, fi); - BUG_ON(extent_type != BTRFS_FILE_EXTENT_PREALLOC); + BUG_ON(btrfs_file_extent_type(leaf, fi) != + BTRFS_FILE_EXTENT_PREALLOC); extent_end = key.offset + btrfs_file_extent_num_bytes(leaf, fi); BUG_ON(key.offset > start || extent_end < end); @@ -670,150 +596,91 @@ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi); orig_offset = key.offset - btrfs_file_extent_offset(leaf, fi); - if (key.offset == start) - split = end; - - if (key.offset == start && extent_end == end) { - int del_nr = 0; - int del_slot = 0; - other_start = end; - other_end = 0; - if (extent_mergeable(leaf, path->slots[0] + 1, inode->i_ino, - bytenr, &other_start, &other_end)) { - extent_end = other_end; - del_slot = path->slots[0] + 1; - del_nr++; - ret = btrfs_free_extent(trans, root, bytenr, num_bytes, - 0, root->root_key.objectid, - inode->i_ino, orig_offset); - BUG_ON(ret); - } - other_start = 0; - other_end = start; - if (extent_mergeable(leaf, path->slots[0] - 1, inode->i_ino, - bytenr, &other_start, &other_end)) { - key.offset = other_start; - del_slot = path->slots[0]; - del_nr++; - ret = btrfs_free_extent(trans, root, bytenr, num_bytes, - 0, root->root_key.objectid, - inode->i_ino, orig_offset); - BUG_ON(ret); - } - split_end = 0; - if (del_nr == 0) { - btrfs_set_file_extent_type(leaf, fi, - BTRFS_FILE_EXTENT_REG); - goto done; + while (start > key.offset || end < extent_end) { + if (key.offset == start) + split = end; + + memcpy(&new_key, &key, sizeof(new_key)); + new_key.offset = split; + ret = btrfs_duplicate_item(trans, root, path, &new_key); + if (ret == -EAGAIN) { + btrfs_release_path(root, path); + goto again; } + BUG_ON(ret < 0); - fi = btrfs_item_ptr(leaf, del_slot - 1, + leaf = path->nodes[0]; + fi = btrfs_item_ptr(leaf, path->slots[0] - 1, struct btrfs_file_extent_item); - btrfs_set_file_extent_type(leaf, fi, BTRFS_FILE_EXTENT_REG); btrfs_set_file_extent_num_bytes(leaf, fi, - extent_end - key.offset); + split - key.offset); + + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); + + btrfs_set_file_extent_offset(leaf, fi, split - orig_offset); + btrfs_set_file_extent_num_bytes(leaf, fi, + extent_end - split); btrfs_mark_buffer_dirty(leaf); - ret = btrfs_del_items(trans, root, path, del_slot, del_nr); + ret = btrfs_inc_extent_ref(trans, root, bytenr, num_bytes, 0, + root->root_key.objectid, + inode->i_ino, orig_offset); BUG_ON(ret); - goto release; - } else if (split == start) { - if (locked_end < extent_end) { - ret = try_lock_extent(&BTRFS_I(inode)->io_tree, - locked_end, extent_end - 1, GFP_NOFS); - if (!ret) { - btrfs_release_path(root, path); - lock_extent(&BTRFS_I(inode)->io_tree, - locked_end, extent_end - 1, GFP_NOFS); - locked_end = extent_end; - goto again; - } - locked_end = extent_end; - } - btrfs_set_file_extent_num_bytes(leaf, fi, split - key.offset); - } else { - BUG_ON(key.offset != start); - key.offset = split; - btrfs_set_file_extent_offset(leaf, fi, key.offset - - orig_offset); - btrfs_set_file_extent_num_bytes(leaf, fi, extent_end - split); - btrfs_set_item_key_safe(trans, root, path, &key); - extent_end = split; - } - if (extent_end == end) { - split_end = 0; - extent_type = BTRFS_FILE_EXTENT_REG; - } - if (extent_end == end && split == start) { - other_start = end; - other_end = 0; - if (extent_mergeable(leaf, path->slots[0] + 1, inode->i_ino, - bytenr, &other_start, &other_end)) { - path->slots[0]++; - fi = btrfs_item_ptr(leaf, path->slots[0], - struct btrfs_file_extent_item); - key.offset = split; - btrfs_set_item_key_safe(trans, root, path, &key); - btrfs_set_file_extent_offset(leaf, fi, key.offset - - orig_offset); - btrfs_set_file_extent_num_bytes(leaf, fi, - other_end - split); - goto done; - } - } - if (extent_end == end && split == end) { - other_start = 0; - other_end = start; - if (extent_mergeable(leaf, path->slots[0] - 1 , inode->i_ino, - bytenr, &other_start, &other_end)) { + if (split == start) { + key.offset = start; + } else { + BUG_ON(start != key.offset); path->slots[0]--; - fi = btrfs_item_ptr(leaf, path->slots[0], - struct btrfs_file_extent_item); - btrfs_set_file_extent_num_bytes(leaf, fi, extent_end - - other_start); - goto done; + extent_end = end; } } - btrfs_mark_buffer_dirty(leaf); - - ret = btrfs_inc_extent_ref(trans, root, bytenr, num_bytes, 0, - root->root_key.objectid, - inode->i_ino, orig_offset); - BUG_ON(ret); - btrfs_release_path(root, path); - - key.offset = start; - ret = btrfs_insert_empty_item(trans, root, path, &key, sizeof(*fi)); - BUG_ON(ret); - - leaf = path->nodes[0]; fi = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_file_extent_item); - btrfs_set_file_extent_generation(leaf, fi, trans->transid); - btrfs_set_file_extent_type(leaf, fi, extent_type); - btrfs_set_file_extent_disk_bytenr(leaf, fi, bytenr); - btrfs_set_file_extent_disk_num_bytes(leaf, fi, num_bytes); - btrfs_set_file_extent_offset(leaf, fi, key.offset - orig_offset); - btrfs_set_file_extent_num_bytes(leaf, fi, extent_end - key.offset); - btrfs_set_file_extent_ram_bytes(leaf, fi, num_bytes); - btrfs_set_file_extent_compression(leaf, fi, 0); - btrfs_set_file_extent_encryption(leaf, fi, 0); - btrfs_set_file_extent_other_encoding(leaf, fi, 0); -done: - btrfs_mark_buffer_dirty(leaf); -release: - btrfs_release_path(root, path); - if (split_end && split == start) { - split = end; - goto again; + other_start = end; + other_end = 0; + if (extent_mergeable(leaf, path->slots[0] + 1, inode->i_ino, + bytenr, &other_start, &other_end)) { + extent_end = other_end; + del_slot = path->slots[0] + 1; + del_nr++; + ret = btrfs_free_extent(trans, root, bytenr, num_bytes, + 0, root->root_key.objectid, + inode->i_ino, orig_offset); + BUG_ON(ret); } - if (locked_end > end) { - unlock_extent(&BTRFS_I(inode)->io_tree, end, locked_end - 1, - GFP_NOFS); + other_start = 0; + other_end = start; + if (extent_mergeable(leaf, path->slots[0] - 1, inode->i_ino, + bytenr, &other_start, &other_end)) { + key.offset = other_start; + del_slot = path->slots[0]; + del_nr++; + ret = btrfs_free_extent(trans, root, bytenr, num_bytes, + 0, root->root_key.objectid, + inode->i_ino, orig_offset); + BUG_ON(ret); } + if (del_nr == 0) { + btrfs_set_file_extent_type(leaf, fi, + BTRFS_FILE_EXTENT_REG); + btrfs_mark_buffer_dirty(leaf); + goto out; + } + + fi = btrfs_item_ptr(leaf, del_slot - 1, + struct btrfs_file_extent_item); + btrfs_set_file_extent_type(leaf, fi, BTRFS_FILE_EXTENT_REG); + btrfs_set_file_extent_num_bytes(leaf, fi, + extent_end - key.offset); + btrfs_mark_buffer_dirty(leaf); + + ret = btrfs_del_items(trans, root, path, del_slot, del_nr); + BUG_ON(ret); +out: btrfs_free_path(path); return 0; } diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index b3ad168a0bfc..ef250be49cdb 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -230,8 +230,7 @@ static noinline int cow_file_range_inline(struct btrfs_trans_handle *trans, return 1; } - ret = btrfs_drop_extents(trans, root, inode, start, - aligned_end, aligned_end, start, + ret = btrfs_drop_extents(trans, inode, start, aligned_end, &hint_byte, 1); BUG_ON(ret); @@ -1596,7 +1595,6 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans, struct inode *inode, u64 file_pos, u64 disk_bytenr, u64 disk_num_bytes, u64 num_bytes, u64 ram_bytes, - u64 locked_end, u8 compression, u8 encryption, u16 other_encoding, int extent_type) { @@ -1622,9 +1620,8 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans, * the caller is expected to unpin it and allow it to be merged * with the others. */ - ret = btrfs_drop_extents(trans, root, inode, file_pos, - file_pos + num_bytes, locked_end, - file_pos, &hint, 0); + ret = btrfs_drop_extents(trans, inode, file_pos, file_pos + num_bytes, + &hint, 0); BUG_ON(ret); ins.objectid = inode->i_ino; @@ -1746,7 +1743,7 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) compressed = 1; if (test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) { BUG_ON(compressed); - ret = btrfs_mark_extent_written(trans, root, inode, + ret = btrfs_mark_extent_written(trans, inode, ordered_extent->file_offset, ordered_extent->file_offset + ordered_extent->len); @@ -1758,8 +1755,6 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) ordered_extent->disk_len, ordered_extent->len, ordered_extent->len, - ordered_extent->file_offset + - ordered_extent->len, compressed, 0, 0, BTRFS_FILE_EXTENT_REG); unpin_extent_cache(&BTRFS_I(inode)->extent_tree, @@ -3209,11 +3204,9 @@ int btrfs_cont_expand(struct inode *inode, loff_t size) if (test_bit(EXTENT_FLAG_VACANCY, &em->flags)) { u64 hint_byte = 0; hole_size = last_byte - cur_offset; - err = btrfs_drop_extents(trans, root, inode, - cur_offset, + err = btrfs_drop_extents(trans, inode, cur_offset, cur_offset + hole_size, - block_end, - cur_offset, &hint_byte, 1); + &hint_byte, 1); if (err) break; @@ -5643,7 +5636,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, static int prealloc_file_range(struct btrfs_trans_handle *trans, struct inode *inode, u64 start, u64 end, - u64 locked_end, u64 alloc_hint, int mode) + u64 alloc_hint, int mode) { struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_key ins; @@ -5669,8 +5662,7 @@ static int prealloc_file_range(struct btrfs_trans_handle *trans, ret = insert_reserved_file_extent(trans, inode, cur_offset, ins.objectid, ins.offset, ins.offset, - ins.offset, locked_end, - 0, 0, 0, + ins.offset, 0, 0, 0, BTRFS_FILE_EXTENT_PREALLOC); BUG_ON(ret); btrfs_drop_extent_cache(inode, cur_offset, @@ -5779,8 +5771,7 @@ static long btrfs_fallocate(struct inode *inode, int mode, last_byte = (last_byte + mask) & ~mask; if (em->block_start == EXTENT_MAP_HOLE) { ret = prealloc_file_range(trans, inode, cur_offset, - last_byte, locked_end + 1, - alloc_hint, mode); + last_byte, alloc_hint, mode); if (ret < 0) { free_extent_map(em); break; diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index cdbb054102b9..a1a8db8c149d 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1027,8 +1027,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, BUG_ON(!trans); /* punch hole in destination first */ - btrfs_drop_extents(trans, root, inode, off, off + len, - off + len, 0, &hint_byte, 1); + btrfs_drop_extents(trans, inode, off, off + len, &hint_byte, 1); /* clone data */ key.objectid = src->i_ino; diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 31da0002e78b..6bbaa10bb67e 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -542,8 +542,8 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans, saved_nbytes = inode_get_bytes(inode); /* drop any overlapping extents */ - ret = btrfs_drop_extents(trans, root, inode, - start, extent_end, extent_end, start, &alloc_hint, 1); + ret = btrfs_drop_extents(trans, inode, start, extent_end, + &alloc_hint, 1); BUG_ON(ret); if (found_type == BTRFS_FILE_EXTENT_REG || -- GitLab From 95f158eab42f971c2a6f82cc886ce657d92a25f4 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Fri, 11 Dec 2009 23:44:49 +0100 Subject: [PATCH 120/618] drm/nv04-nv40: Fix "conflicting memory types" when saving/restoring VGA fonts. Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv04_display.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv04_display.c b/drivers/gpu/drm/nouveau/nv04_display.c index b47c757ff48b..cdddbaa8c450 100644 --- a/drivers/gpu/drm/nouveau/nv04_display.c +++ b/drivers/gpu/drm/nouveau/nv04_display.c @@ -103,6 +103,7 @@ nv04_display_create(struct drm_device *dev) if (nv_two_heads(dev)) nv04_display_store_initial_head_owner(dev); + nouveau_hw_save_vga_fonts(dev, 1); drm_mode_config_init(dev); drm_mode_create_scaling_mode_property(dev); @@ -203,8 +204,6 @@ nv04_display_create(struct drm_device *dev) /* Save previous state */ NVLockVgaCrtcs(dev, false); - nouveau_hw_save_vga_fonts(dev, 1); - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) crtc->funcs->save(crtc); @@ -246,9 +245,9 @@ nv04_display_destroy(struct drm_device *dev) list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) crtc->funcs->restore(crtc); - nouveau_hw_save_vga_fonts(dev, 0); - drm_mode_config_cleanup(dev); + + nouveau_hw_save_vga_fonts(dev, 0); } void -- GitLab From dc4a684ae80d914b2b7fe75b2733a3296a8b92d2 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Tue, 15 Dec 2009 01:34:42 +0100 Subject: [PATCH 121/618] drm/i2c/ch7006: Fix load detection false positives right after system init. Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/i2c/ch7006_drv.c | 5 +++++ drivers/gpu/drm/i2c/ch7006_mode.c | 5 ----- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c index 9422a74c8b54..81681a07a806 100644 --- a/drivers/gpu/drm/i2c/ch7006_drv.c +++ b/drivers/gpu/drm/i2c/ch7006_drv.c @@ -408,6 +408,11 @@ static int ch7006_probe(struct i2c_client *client, const struct i2c_device_id *i ch7006_info(client, "Detected version ID: %x\n", val); + /* I don't know what this is for, but otherwise I get no + * signal. + */ + ch7006_write(client, 0x3d, 0x0); + return 0; fail: diff --git a/drivers/gpu/drm/i2c/ch7006_mode.c b/drivers/gpu/drm/i2c/ch7006_mode.c index 87f5445092e8..e447dfb63890 100644 --- a/drivers/gpu/drm/i2c/ch7006_mode.c +++ b/drivers/gpu/drm/i2c/ch7006_mode.c @@ -427,11 +427,6 @@ void ch7006_state_load(struct i2c_client *client, ch7006_load_reg(client, state, CH7006_SUBC_INC7); ch7006_load_reg(client, state, CH7006_PLL_CONTROL); ch7006_load_reg(client, state, CH7006_CALC_SUBC_INC0); - - /* I don't know what this is for, but otherwise I get no - * signal. - */ - ch7006_write(client, 0x3d, 0x0); } void ch7006_state_save(struct i2c_client *client, -- GitLab From ef2bb506687a5f1cc8ef2fef370bb168b2808106 Mon Sep 17 00:00:00 2001 From: Maarten Maathuis Date: Sun, 13 Dec 2009 16:53:12 +0100 Subject: [PATCH 122/618] drm/nouveau: use drm debug levels - Use driver level (0x2) for NV_DEBUG instead of all levels - Create a NV_DEBUG_KMS for KMS level (0x4) and use them in modesetting code - Remove a few odd NV_TRACE calls and replace some of them with NV_DEBUG_KMS or NV_INFO Signed-off-by: Maarten Maathuis Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 12 ++++----- drivers/gpu/drm/nouveau/nouveau_connector.c | 8 +++--- drivers/gpu/drm/nouveau/nouveau_dp.c | 28 ++++++++++----------- drivers/gpu/drm/nouveau/nouveau_drv.h | 14 +++++++++-- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 2 +- drivers/gpu/drm/nouveau/nv04_crtc.c | 10 ++++---- drivers/gpu/drm/nouveau/nv04_dac.c | 8 ++---- drivers/gpu/drm/nouveau/nv04_dfp.c | 8 +++--- drivers/gpu/drm/nouveau/nv04_display.c | 4 +-- drivers/gpu/drm/nouveau/nv17_tv.c | 4 +-- drivers/gpu/drm/nouveau/nv50_crtc.c | 22 ++++++++-------- drivers/gpu/drm/nouveau/nv50_cursor.c | 8 +++--- drivers/gpu/drm/nouveau/nv50_dac.c | 20 +++++++-------- drivers/gpu/drm/nouveau/nv50_display.c | 20 +++++++-------- drivers/gpu/drm/nouveau/nv50_sor.c | 16 ++++++------ 15 files changed, 96 insertions(+), 88 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 5eec5ed69489..62fadbbd1f40 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -3854,7 +3854,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, * script tables is a pointer to the script to execute. */ - NV_DEBUG(dev, "Searching for output entry for %d %d %d\n", + NV_DEBUG_KMS(dev, "Searching for output entry for %d %d %d\n", dcbent->type, dcbent->location, dcbent->or); otable = bios_output_config_match(dev, dcbent, table[1] + bios->display.script_table_ptr, @@ -3884,7 +3884,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, if (pxclk == 0) { script = ROM16(otable[6]); if (!script) { - NV_DEBUG(dev, "output script 0 not found\n"); + NV_DEBUG_KMS(dev, "output script 0 not found\n"); return 1; } @@ -3894,7 +3894,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, if (pxclk == -1) { script = ROM16(otable[8]); if (!script) { - NV_DEBUG(dev, "output script 1 not found\n"); + NV_DEBUG_KMS(dev, "output script 1 not found\n"); return 1; } @@ -3907,7 +3907,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, else script = 0; if (!script) { - NV_DEBUG(dev, "output script 2 not found\n"); + NV_DEBUG_KMS(dev, "output script 2 not found\n"); return 1; } @@ -3931,7 +3931,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, if (script) script = clkcmptable(bios, script, -pxclk); if (!script) { - NV_DEBUG(dev, "clock script 1 not found\n"); + NV_DEBUG_KMS(dev, "clock script 1 not found\n"); return 1; } @@ -5234,7 +5234,7 @@ parse_dcb_connector_table(struct nvbios *bios) int i; if (!bios->bdcb.connector_table_ptr) { - NV_DEBUG(dev, "No DCB connector table present\n"); + NV_DEBUG_KMS(dev, "No DCB connector table present\n"); return; } diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 032cf098fa1c..5a10deb8bdbd 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -86,7 +86,7 @@ nouveau_connector_destroy(struct drm_connector *drm_connector) struct nouveau_connector *connector = nouveau_connector(drm_connector); struct drm_device *dev = connector->base.dev; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (!connector) return; @@ -420,7 +420,7 @@ nouveau_connector_native_mode(struct nouveau_connector *connector) /* Use preferred mode if there is one.. */ list_for_each_entry(mode, &connector->base.probed_modes, head) { if (mode->type & DRM_MODE_TYPE_PREFERRED) { - NV_DEBUG(dev, "native mode from preferred\n"); + NV_DEBUG_KMS(dev, "native mode from preferred\n"); return drm_mode_duplicate(dev, mode); } } @@ -445,7 +445,7 @@ nouveau_connector_native_mode(struct nouveau_connector *connector) largest = mode; } - NV_DEBUG(dev, "native mode from largest: %dx%d@%d\n", + NV_DEBUG_KMS(dev, "native mode from largest: %dx%d@%d\n", high_w, high_h, high_v); return largest ? drm_mode_duplicate(dev, largest) : NULL; } @@ -725,7 +725,7 @@ nouveau_connector_create(struct drm_device *dev, int index, int type) struct drm_encoder *encoder; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL); if (!nv_connector) diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c index de61f4640e12..9e2926c48579 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dp.c +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c @@ -187,7 +187,7 @@ nouveau_dp_link_train_adjust(struct drm_encoder *encoder, uint8_t *config) if (ret) return false; - NV_DEBUG(dev, "\t\tadjust 0x%02x 0x%02x\n", request[0], request[1]); + NV_DEBUG_KMS(dev, "\t\tadjust 0x%02x 0x%02x\n", request[0], request[1]); /* Keep all lanes at the same level.. */ for (i = 0; i < nv_encoder->dp.link_nr; i++) { @@ -228,7 +228,7 @@ nouveau_dp_link_train_commit(struct drm_encoder *encoder, uint8_t *config) int or = nv_encoder->or, link = !(nv_encoder->dcb->sorconf.link & 1); int dpe_headerlen, ret, i; - NV_DEBUG(dev, "\t\tconfig 0x%02x 0x%02x 0x%02x 0x%02x\n", + NV_DEBUG_KMS(dev, "\t\tconfig 0x%02x 0x%02x 0x%02x 0x%02x\n", config[0], config[1], config[2], config[3]); dpe = nouveau_bios_dp_table(dev, nv_encoder->dcb, &dpe_headerlen); @@ -276,12 +276,12 @@ nouveau_dp_link_train(struct drm_encoder *encoder) bool cr_done, cr_max_vs, eq_done; int ret = 0, i, tries, voltage; - NV_DEBUG(dev, "link training!!\n"); + NV_DEBUG_KMS(dev, "link training!!\n"); train: cr_done = eq_done = false; /* set link configuration */ - NV_DEBUG(dev, "\tbegin train: bw %d, lanes %d\n", + NV_DEBUG_KMS(dev, "\tbegin train: bw %d, lanes %d\n", nv_encoder->dp.link_bw, nv_encoder->dp.link_nr); ret = nouveau_dp_link_bw_set(encoder, nv_encoder->dp.link_bw); @@ -297,7 +297,7 @@ nouveau_dp_link_train(struct drm_encoder *encoder) return false; /* clock recovery */ - NV_DEBUG(dev, "\tbegin cr\n"); + NV_DEBUG_KMS(dev, "\tbegin cr\n"); ret = nouveau_dp_link_train_set(encoder, DP_TRAINING_PATTERN_1); if (ret) goto stop; @@ -314,7 +314,7 @@ nouveau_dp_link_train(struct drm_encoder *encoder) ret = auxch_rd(encoder, DP_LANE0_1_STATUS, status, 2); if (ret) break; - NV_DEBUG(dev, "\t\tstatus: 0x%02x 0x%02x\n", + NV_DEBUG_KMS(dev, "\t\tstatus: 0x%02x 0x%02x\n", status[0], status[1]); cr_done = true; @@ -346,7 +346,7 @@ nouveau_dp_link_train(struct drm_encoder *encoder) goto stop; /* channel equalisation */ - NV_DEBUG(dev, "\tbegin eq\n"); + NV_DEBUG_KMS(dev, "\tbegin eq\n"); ret = nouveau_dp_link_train_set(encoder, DP_TRAINING_PATTERN_2); if (ret) goto stop; @@ -357,7 +357,7 @@ nouveau_dp_link_train(struct drm_encoder *encoder) ret = auxch_rd(encoder, DP_LANE0_1_STATUS, status, 3); if (ret) break; - NV_DEBUG(dev, "\t\tstatus: 0x%02x 0x%02x\n", + NV_DEBUG_KMS(dev, "\t\tstatus: 0x%02x 0x%02x\n", status[0], status[1]); eq_done = true; @@ -395,9 +395,9 @@ nouveau_dp_link_train(struct drm_encoder *encoder) /* retry at a lower setting, if possible */ if (!ret && !(eq_done && cr_done)) { - NV_DEBUG(dev, "\twe failed\n"); + NV_DEBUG_KMS(dev, "\twe failed\n"); if (nv_encoder->dp.link_bw != DP_LINK_BW_1_62) { - NV_DEBUG(dev, "retry link training at low rate\n"); + NV_DEBUG_KMS(dev, "retry link training at low rate\n"); nv_encoder->dp.link_bw = DP_LINK_BW_1_62; goto train; } @@ -418,7 +418,7 @@ nouveau_dp_detect(struct drm_encoder *encoder) if (ret) return false; - NV_DEBUG(dev, "encoder: link_bw %d, link_nr %d\n" + NV_DEBUG_KMS(dev, "encoder: link_bw %d, link_nr %d\n" "display: link_bw %d, link_nr %d version 0x%02x\n", nv_encoder->dcb->dpconf.link_bw, nv_encoder->dcb->dpconf.link_nr, @@ -446,7 +446,7 @@ nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr, uint32_t tmp, ctrl, stat = 0, data32[4] = {}; int ret = 0, i, index = auxch->rd; - NV_DEBUG(dev, "ch %d cmd %d addr 0x%x len %d\n", index, cmd, addr, data_nr); + NV_DEBUG_KMS(dev, "ch %d cmd %d addr 0x%x len %d\n", index, cmd, addr, data_nr); tmp = nv_rd32(dev, NV50_AUXCH_CTRL(auxch->rd)); nv_wr32(dev, NV50_AUXCH_CTRL(auxch->rd), tmp | 0x00100000); @@ -472,7 +472,7 @@ nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr, if (!(cmd & 1)) { memcpy(data32, data, data_nr); for (i = 0; i < 4; i++) { - NV_DEBUG(dev, "wr %d: 0x%08x\n", i, data32[i]); + NV_DEBUG_KMS(dev, "wr %d: 0x%08x\n", i, data32[i]); nv_wr32(dev, NV50_AUXCH_DATA_OUT(index, i), data32[i]); } } @@ -504,7 +504,7 @@ nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr, if (cmd & 1) { for (i = 0; i < 4; i++) { data32[i] = nv_rd32(dev, NV50_AUXCH_DATA_IN(index, i)); - NV_DEBUG(dev, "rd %d: 0x%08x\n", i, data32[i]); + NV_DEBUG_KMS(dev, "rd %d: 0x%08x\n", i, data32[i]); } memcpy(data, data32, data_nr); } diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 88b4c7b77e7f..bc6ffa5eeac7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -1207,14 +1207,24 @@ static inline void nv_wo32(struct drm_device *dev, struct nouveau_gpuobj *obj, pci_name(d->pdev), ##arg) #ifndef NV_DEBUG_NOTRACE #define NV_DEBUG(d, fmt, arg...) do { \ - if (drm_debug) { \ + if (drm_debug & DRM_UT_DRIVER) { \ + NV_PRINTK(KERN_DEBUG, d, "%s:%d - " fmt, __func__, \ + __LINE__, ##arg); \ + } \ +} while (0) +#define NV_DEBUG_KMS(d, fmt, arg...) do { \ + if (drm_debug & DRM_UT_KMS) { \ NV_PRINTK(KERN_DEBUG, d, "%s:%d - " fmt, __func__, \ __LINE__, ##arg); \ } \ } while (0) #else #define NV_DEBUG(d, fmt, arg...) do { \ - if (drm_debug) \ + if (drm_debug & DRM_UT_DRIVER) \ + NV_PRINTK(KERN_DEBUG, d, fmt, ##arg); \ +} while (0) +#define NV_DEBUG_KMS(d, fmt, arg...) do { \ + if (drm_debug & DRM_UT_KMS) \ NV_PRINTK(KERN_DEBUG, d, fmt, ##arg); \ } while (0) #endif diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 36e8c5e4503a..489d49268119 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -347,7 +347,7 @@ nouveau_fbcon_create(struct drm_device *dev, uint32_t fb_width, int nouveau_fbcon_probe(struct drm_device *dev) { - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); return drm_fb_helper_single_fb_probe(dev, 32, nouveau_fbcon_create); } diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c index b91363606055..d2f143ed97c1 100644 --- a/drivers/gpu/drm/nouveau/nv04_crtc.c +++ b/drivers/gpu/drm/nouveau/nv04_crtc.c @@ -143,10 +143,10 @@ static void nv_crtc_calc_state_ext(struct drm_crtc *crtc, struct drm_display_mod state->pllsel |= nv_crtc->index ? PLLSEL_VPLL2_MASK : PLLSEL_VPLL1_MASK; if (pv->NM2) - NV_TRACE(dev, "vpll: n1 %d n2 %d m1 %d m2 %d log2p %d\n", + NV_DEBUG_KMS(dev, "vpll: n1 %d n2 %d m1 %d m2 %d log2p %d\n", pv->N1, pv->N2, pv->M1, pv->M2, pv->log2P); else - NV_TRACE(dev, "vpll: n %d m %d log2p %d\n", + NV_DEBUG_KMS(dev, "vpll: n %d m %d log2p %d\n", pv->N1, pv->M1, pv->log2P); nv_crtc->cursor.set_offset(nv_crtc, nv_crtc->cursor.offset); @@ -160,7 +160,7 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode) unsigned char seq1 = 0, crtc17 = 0; unsigned char crtc1A; - NV_TRACE(dev, "Setting dpms mode %d on CRTC %d\n", mode, + NV_DEBUG_KMS(dev, "Setting dpms mode %d on CRTC %d\n", mode, nv_crtc->index); if (nv_crtc->last_dpms == mode) /* Don't do unnecesary mode changes. */ @@ -603,7 +603,7 @@ nv_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); struct drm_nouveau_private *dev_priv = dev->dev_private; - NV_DEBUG(dev, "CTRC mode on CRTC %d:\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "CTRC mode on CRTC %d:\n", nv_crtc->index); drm_mode_debug_printmodeline(adjusted_mode); /* unlock must come after turning off FP_TG_CONTROL in output_prepare */ @@ -703,7 +703,7 @@ static void nv_crtc_destroy(struct drm_crtc *crtc) { struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); - NV_DEBUG(crtc->dev, "\n"); + NV_DEBUG_KMS(crtc->dev, "\n"); if (!nv_crtc) return; diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c index a5fa51714e87..d9f32879ba38 100644 --- a/drivers/gpu/drm/nouveau/nv04_dac.c +++ b/drivers/gpu/drm/nouveau/nv04_dac.c @@ -205,7 +205,7 @@ static enum drm_connector_status nv04_dac_detect(struct drm_encoder *encoder, NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1); if (blue == 0x18) { - NV_TRACE(dev, "Load detected on head A\n"); + NV_INFO(dev, "Load detected on head A\n"); return connector_status_connected; } @@ -350,14 +350,10 @@ static void nv04_dac_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); struct drm_device *dev = encoder->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; int head = nouveau_crtc(encoder->crtc)->index; - NV_TRACE(dev, "%s called for encoder %d\n", __func__, - nv_encoder->dcb->index); - if (nv_gf4_disp_arch(dev)) { struct drm_encoder *rebind; uint32_t dac_offset = nv04_dac_output_offset(encoder); @@ -466,7 +462,7 @@ static void nv04_dac_destroy(struct drm_encoder *encoder) { struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); kfree(nv_encoder); diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c index e5b33339d595..483f875bdb6a 100644 --- a/drivers/gpu/drm/nouveau/nv04_dfp.c +++ b/drivers/gpu/drm/nouveau/nv04_dfp.c @@ -261,7 +261,7 @@ static void nv04_dfp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *output_mode = &nv_encoder->mode; uint32_t mode_ratio, panel_ratio; - NV_DEBUG(dev, "Output mode on CRTC %d:\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "Output mode on CRTC %d:\n", nv_crtc->index); drm_mode_debug_printmodeline(output_mode); /* Initialize the FP registers in this CRTC. */ @@ -413,7 +413,9 @@ static void nv04_dfp_commit(struct drm_encoder *encoder) struct dcb_entry *dcbe = nv_encoder->dcb; int head = nouveau_crtc(encoder->crtc)->index; - NV_TRACE(dev, "%s called for encoder %d\n", __func__, nv_encoder->dcb->index); + NV_INFO(dev, "Output %s is running on CRTC %d using output %c\n", + drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), + nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); if (dcbe->type == OUTPUT_TMDS) run_tmds_table(dev, dcbe, head, nv_encoder->mode.clock); @@ -550,7 +552,7 @@ static void nv04_dfp_destroy(struct drm_encoder *encoder) { struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); kfree(nv_encoder); diff --git a/drivers/gpu/drm/nouveau/nv04_display.c b/drivers/gpu/drm/nouveau/nv04_display.c index cdddbaa8c450..ef77215fa5b9 100644 --- a/drivers/gpu/drm/nouveau/nv04_display.c +++ b/drivers/gpu/drm/nouveau/nv04_display.c @@ -99,7 +99,7 @@ nv04_display_create(struct drm_device *dev) uint16_t connector[16] = { 0 }; int i, ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (nv_two_heads(dev)) nv04_display_store_initial_head_owner(dev); @@ -222,7 +222,7 @@ nv04_display_destroy(struct drm_device *dev) struct drm_encoder *encoder; struct drm_crtc *crtc; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); /* Turn every CRTC off. */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c index 46cfd9c60478..81c01353a9f9 100644 --- a/drivers/gpu/drm/nouveau/nv17_tv.c +++ b/drivers/gpu/drm/nouveau/nv17_tv.c @@ -219,7 +219,7 @@ static void nv17_tv_dpms(struct drm_encoder *encoder, int mode) return; nouveau_encoder(encoder)->last_dpms = mode; - NV_TRACE(dev, "Setting dpms mode %d on TV encoder (output %d)\n", + NV_INFO(dev, "Setting dpms mode %d on TV encoder (output %d)\n", mode, nouveau_encoder(encoder)->dcb->index); regs->ptv_200 &= ~1; @@ -619,7 +619,7 @@ static void nv17_tv_destroy(struct drm_encoder *encoder) { struct nv17_tv_encoder *tv_enc = to_tv_enc(encoder); - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); kfree(tv_enc); diff --git a/drivers/gpu/drm/nouveau/nv50_crtc.c b/drivers/gpu/drm/nouveau/nv50_crtc.c index f8e28a1e44e7..118d3285fd8c 100644 --- a/drivers/gpu/drm/nouveau/nv50_crtc.c +++ b/drivers/gpu/drm/nouveau/nv50_crtc.c @@ -45,7 +45,7 @@ nv50_crtc_lut_load(struct drm_crtc *crtc) void __iomem *lut = nvbo_kmap_obj_iovirtual(nv_crtc->lut.nvbo); int i; - NV_DEBUG(crtc->dev, "\n"); + NV_DEBUG_KMS(crtc->dev, "\n"); for (i = 0; i < 256; i++) { writew(nv_crtc->lut.r[i] >> 2, lut + 8*i + 0); @@ -68,8 +68,8 @@ nv50_crtc_blank(struct nouveau_crtc *nv_crtc, bool blanked) struct nouveau_channel *evo = dev_priv->evo; int index = nv_crtc->index, ret; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); - NV_DEBUG(dev, "%s\n", blanked ? "blanked" : "unblanked"); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "%s\n", blanked ? "blanked" : "unblanked"); if (blanked) { nv_crtc->cursor.hide(nv_crtc, false); @@ -139,7 +139,7 @@ nv50_crtc_set_dither(struct nouveau_crtc *nv_crtc, bool on, bool update) struct nouveau_channel *evo = dev_priv->evo; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); ret = RING_SPACE(evo, 2 + (update ? 2 : 0)); if (ret) { @@ -193,7 +193,7 @@ nv50_crtc_set_scale(struct nouveau_crtc *nv_crtc, int scaling_mode, bool update) uint32_t outX, outY, horiz, vert; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); switch (scaling_mode) { case DRM_MODE_SCALE_NONE: @@ -301,7 +301,7 @@ nv50_crtc_destroy(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (!crtc) return; @@ -433,7 +433,7 @@ nv50_crtc_prepare(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_encoder *encoder; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); /* Disconnect all unused encoders. */ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { @@ -458,7 +458,7 @@ nv50_crtc_commit(struct drm_crtc *crtc) struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); int ret; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); nv50_crtc_blank(nv_crtc, false); @@ -497,7 +497,7 @@ nv50_crtc_do_mode_set_base(struct drm_crtc *crtc, int x, int y, struct nouveau_framebuffer *fb = nouveau_framebuffer(drm_fb); int ret, format; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); switch (drm_fb->depth) { case 8: @@ -612,7 +612,7 @@ nv50_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, *nv_crtc->mode = *adjusted_mode; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); hsync_dur = adjusted_mode->hsync_end - adjusted_mode->hsync_start; vsync_dur = adjusted_mode->vsync_end - adjusted_mode->vsync_start; @@ -706,7 +706,7 @@ nv50_crtc_create(struct drm_device *dev, int index) struct nouveau_crtc *nv_crtc = NULL; int ret, i; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); nv_crtc = kzalloc(sizeof(*nv_crtc), GFP_KERNEL); if (!nv_crtc) diff --git a/drivers/gpu/drm/nouveau/nv50_cursor.c b/drivers/gpu/drm/nouveau/nv50_cursor.c index e2e79a8f220d..753e723adb3a 100644 --- a/drivers/gpu/drm/nouveau/nv50_cursor.c +++ b/drivers/gpu/drm/nouveau/nv50_cursor.c @@ -41,7 +41,7 @@ nv50_cursor_show(struct nouveau_crtc *nv_crtc, bool update) struct drm_device *dev = nv_crtc->base.dev; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (update && nv_crtc->cursor.visible) return; @@ -76,7 +76,7 @@ nv50_cursor_hide(struct nouveau_crtc *nv_crtc, bool update) struct drm_device *dev = nv_crtc->base.dev; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (update && !nv_crtc->cursor.visible) return; @@ -116,7 +116,7 @@ nv50_cursor_set_pos(struct nouveau_crtc *nv_crtc, int x, int y) static void nv50_cursor_set_offset(struct nouveau_crtc *nv_crtc, uint32_t offset) { - NV_DEBUG(nv_crtc->base.dev, "\n"); + NV_DEBUG_KMS(nv_crtc->base.dev, "\n"); if (offset == nv_crtc->cursor.offset) return; @@ -143,7 +143,7 @@ nv50_cursor_fini(struct nouveau_crtc *nv_crtc) struct drm_device *dev = nv_crtc->base.dev; int idx = nv_crtc->index; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); nv_wr32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(idx), 0); if (!nv_wait(NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(idx), diff --git a/drivers/gpu/drm/nouveau/nv50_dac.c b/drivers/gpu/drm/nouveau/nv50_dac.c index fb5838e3be24..f08f042a8e10 100644 --- a/drivers/gpu/drm/nouveau/nv50_dac.c +++ b/drivers/gpu/drm/nouveau/nv50_dac.c @@ -44,7 +44,7 @@ nv50_dac_disconnect(struct nouveau_encoder *nv_encoder) struct nouveau_channel *evo = dev_priv->evo; int ret; - NV_DEBUG(dev, "Disconnecting DAC %d\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "Disconnecting DAC %d\n", nv_encoder->or); ret = RING_SPACE(evo, 2); if (ret) { @@ -81,11 +81,11 @@ nv50_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) /* Use bios provided value if possible. */ if (dev_priv->vbios->dactestval) { load_pattern = dev_priv->vbios->dactestval; - NV_DEBUG(dev, "Using bios provided load_pattern of %d\n", + NV_DEBUG_KMS(dev, "Using bios provided load_pattern of %d\n", load_pattern); } else { load_pattern = 340; - NV_DEBUG(dev, "Using default load_pattern of %d\n", + NV_DEBUG_KMS(dev, "Using default load_pattern of %d\n", load_pattern); } @@ -103,9 +103,9 @@ nv50_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) status = connector_status_connected; if (status == connector_status_connected) - NV_DEBUG(dev, "Load was detected on output with or %d\n", or); + NV_DEBUG_KMS(dev, "Load was detected on output with or %d\n", or); else - NV_DEBUG(dev, "Load was not detected on output with or %d\n", or); + NV_DEBUG_KMS(dev, "Load was not detected on output with or %d\n", or); return status; } @@ -118,7 +118,7 @@ nv50_dac_dpms(struct drm_encoder *encoder, int mode) uint32_t val; int or = nv_encoder->or; - NV_DEBUG(dev, "or %d mode %d\n", or, mode); + NV_DEBUG_KMS(dev, "or %d mode %d\n", or, mode); /* wait for it to be done */ if (!nv_wait(NV50_PDISPLAY_DAC_DPMS_CTRL(or), @@ -173,7 +173,7 @@ nv50_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); struct nouveau_connector *connector; - NV_DEBUG(encoder->dev, "or %d\n", nv_encoder->or); + NV_DEBUG_KMS(encoder->dev, "or %d\n", nv_encoder->or); connector = nouveau_encoder_connector_get(nv_encoder); if (!connector) { @@ -213,7 +213,7 @@ nv50_dac_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, uint32_t mode_ctl = 0, mode_ctl2 = 0; int ret; - NV_DEBUG(dev, "or %d\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "or %d\n", nv_encoder->or); nv50_dac_dpms(encoder, DRM_MODE_DPMS_ON); @@ -264,7 +264,7 @@ nv50_dac_destroy(struct drm_encoder *encoder) if (!encoder) return; - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); kfree(nv_encoder); @@ -280,7 +280,7 @@ nv50_dac_create(struct drm_device *dev, struct dcb_entry *entry) struct nouveau_encoder *nv_encoder; struct drm_encoder *encoder; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); NV_INFO(dev, "Detected a DAC output\n"); nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL); diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index 12c5ee63495b..a9263d92a231 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -188,7 +188,7 @@ nv50_display_init(struct drm_device *dev) uint64_t start; int ret, i; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); nv_wr32(dev, 0x00610184, nv_rd32(dev, 0x00614004)); /* @@ -232,7 +232,7 @@ nv50_display_init(struct drm_device *dev) nv_wr32(dev, NV50_PDISPLAY_UNK_380, 0); /* RAM is clamped to 256 MiB. */ ram_amount = nouveau_mem_fb_amount(dev); - NV_DEBUG(dev, "ram_amount %d\n", ram_amount); + NV_DEBUG_KMS(dev, "ram_amount %d\n", ram_amount); if (ram_amount > 256*1024*1024) ram_amount = 256*1024*1024; nv_wr32(dev, NV50_PDISPLAY_RAM_AMOUNT, ram_amount - 1); @@ -398,7 +398,7 @@ static int nv50_display_disable(struct drm_device *dev) struct drm_crtc *drm_crtc; int ret, i; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); list_for_each_entry(drm_crtc, &dev->mode_config.crtc_list, head) { struct nouveau_crtc *crtc = nouveau_crtc(drm_crtc); @@ -469,7 +469,7 @@ int nv50_display_create(struct drm_device *dev) uint32_t connector[16] = {}; int ret, i; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); /* init basic kernel modesetting */ drm_mode_config_init(dev); @@ -573,7 +573,7 @@ int nv50_display_destroy(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); drm_mode_config_cleanup(dev); @@ -617,7 +617,7 @@ nv50_display_irq_head(struct drm_device *dev, int *phead, * CRTC separately, and submission will be blocked by the GPU * until we handle each in turn. */ - NV_DEBUG(dev, "0x610030: 0x%08x\n", unk30); + NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30); head = ffs((unk30 >> 9) & 3) - 1; if (head < 0) return -EINVAL; @@ -661,7 +661,7 @@ nv50_display_irq_head(struct drm_device *dev, int *phead, or = i; } - NV_DEBUG(dev, "type %d, or %d\n", type, or); + NV_DEBUG_KMS(dev, "type %d, or %d\n", type, or); if (type == OUTPUT_ANY) { NV_ERROR(dev, "unknown encoder!!\n"); return -1; @@ -811,7 +811,7 @@ nv50_display_unk20_handler(struct drm_device *dev) pclk = nv_rd32(dev, NV50_PDISPLAY_CRTC_P(head, CLOCK)) & 0x3fffff; script = nv50_display_script_select(dev, dcbent, pclk); - NV_DEBUG(dev, "head %d pxclk: %dKHz\n", head, pclk); + NV_DEBUG_KMS(dev, "head %d pxclk: %dKHz\n", head, pclk); if (dcbent->type != OUTPUT_DP) nouveau_bios_run_display_table(dev, dcbent, 0, -2); @@ -870,7 +870,7 @@ nv50_display_irq_handler_bh(struct work_struct *work) uint32_t intr0 = nv_rd32(dev, NV50_PDISPLAY_INTR_0); uint32_t intr1 = nv_rd32(dev, NV50_PDISPLAY_INTR_1); - NV_DEBUG(dev, "PDISPLAY_INTR_BH 0x%08x 0x%08x\n", intr0, intr1); + NV_DEBUG_KMS(dev, "PDISPLAY_INTR_BH 0x%08x 0x%08x\n", intr0, intr1); if (intr1 & NV50_PDISPLAY_INTR_1_CLK_UNK10) nv50_display_unk10_handler(dev); @@ -974,7 +974,7 @@ nv50_display_irq_handler(struct drm_device *dev) uint32_t intr1 = nv_rd32(dev, NV50_PDISPLAY_INTR_1); uint32_t clock; - NV_DEBUG(dev, "PDISPLAY_INTR 0x%08x 0x%08x\n", intr0, intr1); + NV_DEBUG_KMS(dev, "PDISPLAY_INTR 0x%08x 0x%08x\n", intr0, intr1); if (!intr0 && !(intr1 & ~delayed)) break; diff --git a/drivers/gpu/drm/nouveau/nv50_sor.c b/drivers/gpu/drm/nouveau/nv50_sor.c index 8c280463a664..e395c16d30f5 100644 --- a/drivers/gpu/drm/nouveau/nv50_sor.c +++ b/drivers/gpu/drm/nouveau/nv50_sor.c @@ -44,7 +44,7 @@ nv50_sor_disconnect(struct nouveau_encoder *nv_encoder) struct nouveau_channel *evo = dev_priv->evo; int ret; - NV_DEBUG(dev, "Disconnecting SOR %d\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "Disconnecting SOR %d\n", nv_encoder->or); ret = RING_SPACE(evo, 2); if (ret) { @@ -70,7 +70,7 @@ nv50_sor_dp_link_train(struct drm_encoder *encoder) } if (dpe->script0) { - NV_DEBUG(dev, "SOR-%d: running DP script 0\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "SOR-%d: running DP script 0\n", nv_encoder->or); nouveau_bios_run_init_table(dev, le16_to_cpu(dpe->script0), nv_encoder->dcb); } @@ -79,7 +79,7 @@ nv50_sor_dp_link_train(struct drm_encoder *encoder) NV_ERROR(dev, "SOR-%d: link training failed\n", nv_encoder->or); if (dpe->script1) { - NV_DEBUG(dev, "SOR-%d: running DP script 1\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "SOR-%d: running DP script 1\n", nv_encoder->or); nouveau_bios_run_init_table(dev, le16_to_cpu(dpe->script1), nv_encoder->dcb); } @@ -93,7 +93,7 @@ nv50_sor_dpms(struct drm_encoder *encoder, int mode) uint32_t val; int or = nv_encoder->or; - NV_DEBUG(dev, "or %d mode %d\n", or, mode); + NV_DEBUG_KMS(dev, "or %d mode %d\n", or, mode); /* wait for it to be done */ if (!nv_wait(NV50_PDISPLAY_SOR_DPMS_CTRL(or), @@ -142,7 +142,7 @@ nv50_sor_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); struct nouveau_connector *connector; - NV_DEBUG(encoder->dev, "or %d\n", nv_encoder->or); + NV_DEBUG_KMS(encoder->dev, "or %d\n", nv_encoder->or); connector = nouveau_encoder_connector_get(nv_encoder); if (!connector) { @@ -182,7 +182,7 @@ nv50_sor_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, uint32_t mode_ctl = 0; int ret; - NV_DEBUG(dev, "or %d\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "or %d\n", nv_encoder->or); nv50_sor_dpms(encoder, DRM_MODE_DPMS_ON); @@ -246,7 +246,7 @@ nv50_sor_destroy(struct drm_encoder *encoder) if (!encoder) return; - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); @@ -265,7 +265,7 @@ nv50_sor_create(struct drm_device *dev, struct dcb_entry *entry) bool dum; int type; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); switch (entry->type) { case OUTPUT_TMDS: -- GitLab From 657b6245ba23d32c7a4fd273549c8c0beebec770 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Tue, 15 Dec 2009 00:37:30 +0000 Subject: [PATCH 123/618] drm/nouveau: Kill global state in NvShadowBIOS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marcin KoÅ›cielnicki Signed-off-by: Maarten Maathuis Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 47 ++++++++++++-------------- 1 file changed, 21 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 62fadbbd1f40..519faa955045 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -181,43 +181,42 @@ struct methods { const char desc[8]; void (*loadbios)(struct drm_device *, uint8_t *); const bool rw; - int score; }; static struct methods nv04_methods[] = { { "PROM", load_vbios_prom, false }, { "PRAMIN", load_vbios_pramin, true }, { "PCIROM", load_vbios_pci, true }, - { } }; static struct methods nv50_methods[] = { { "PRAMIN", load_vbios_pramin, true }, { "PROM", load_vbios_prom, false }, { "PCIROM", load_vbios_pci, true }, - { } }; +#define METHODCNT 3 + static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data) { struct drm_nouveau_private *dev_priv = dev->dev_private; - struct methods *methods, *method; + struct methods *methods; + int i; int testscore = 3; + int scores[METHODCNT]; if (nouveau_vbios) { - method = nv04_methods; - while (method->loadbios) { - if (!strcasecmp(nouveau_vbios, method->desc)) + methods = nv04_methods; + for (i = 0; i < METHODCNT; i++) + if (!strcasecmp(nouveau_vbios, methods[i].desc)) break; - method++; - } - if (method->loadbios) { + if (i < METHODCNT) { NV_INFO(dev, "Attempting to use BIOS image from %s\n", - method->desc); + methods[i].desc); - method->loadbios(dev, data); - if (score_vbios(dev, data, method->rw)) + methods[i].loadbios(dev, data); + if (score_vbios(dev, data, methods[i].rw)) return true; } @@ -229,28 +228,24 @@ static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data) else methods = nv50_methods; - method = methods; - while (method->loadbios) { + for (i = 0; i < METHODCNT; i++) { NV_TRACE(dev, "Attempting to load BIOS image from %s\n", - method->desc); + methods[i].desc); data[0] = data[1] = 0; /* avoid reuse of previous image */ - method->loadbios(dev, data); - method->score = score_vbios(dev, data, method->rw); - if (method->score == testscore) + methods[i].loadbios(dev, data); + scores[i] = score_vbios(dev, data, methods[i].rw); + if (scores[i] == testscore) return true; - method++; } while (--testscore > 0) { - method = methods; - while (method->loadbios) { - if (method->score == testscore) { + for (i = 0; i < METHODCNT; i++) { + if (scores[i] == testscore) { NV_TRACE(dev, "Using BIOS image from %s\n", - method->desc); - method->loadbios(dev, data); + methods[i].desc); + methods[i].loadbios(dev, data); return true; } - method++; } } -- GitLab From 37383650e4f47aef633055e3f62e87a44d83312d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Tue, 15 Dec 2009 00:37:31 +0000 Subject: [PATCH 124/618] drm/nouveau: Kill global state in BIOS script interpreter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marcin KoÅ›cielnicki Signed-off-by: Maarten Maathuis Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 562 ++++++++++++------------- drivers/gpu/drm/nouveau/nouveau_bios.h | 1 + 2 files changed, 276 insertions(+), 287 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 519faa955045..ba143972769f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -256,10 +256,7 @@ static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data) struct init_tbl_entry { char *name; uint8_t id; - int length; - int length_offset; - int length_multiplier; - bool (*handler)(struct nvbios *, uint16_t, struct init_exec *); + int (*handler)(struct nvbios *, uint16_t, struct init_exec *); }; struct bit_entry { @@ -815,7 +812,7 @@ static uint32_t get_tmds_index_reg(struct drm_device *dev, uint8_t mlv) } } -static bool +static int init_io_restrict_prog(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -847,9 +844,10 @@ init_io_restrict_prog(struct nvbios *bios, uint16_t offset, uint32_t reg = ROM32(bios->data[offset + 7]); uint8_t config; uint32_t configval; + int len = 11 + count * 4; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, " "Shift: 0x%02X, Count: 0x%02X, Reg: 0x%08X\n", @@ -860,7 +858,7 @@ init_io_restrict_prog(struct nvbios *bios, uint16_t offset, NV_ERROR(bios->dev, "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n", offset, config, count); - return false; + return 0; } configval = ROM32(bios->data[offset + 11 + config * 4]); @@ -869,10 +867,10 @@ init_io_restrict_prog(struct nvbios *bios, uint16_t offset, bios_wr32(bios, reg, configval); - return true; + return len; } -static bool +static int init_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -907,10 +905,10 @@ init_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) iexec->repeat = false; - return true; + return 2; } -static bool +static int init_io_restrict_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -946,9 +944,10 @@ init_io_restrict_pll(struct nvbios *bios, uint16_t offset, uint32_t reg = ROM32(bios->data[offset + 8]); uint8_t config; uint16_t freq; + int len = 12 + count * 2; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, " "Shift: 0x%02X, IO Flag Condition: 0x%02X, " @@ -961,7 +960,7 @@ init_io_restrict_pll(struct nvbios *bios, uint16_t offset, NV_ERROR(bios->dev, "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n", offset, config, count); - return false; + return 0; } freq = ROM16(bios->data[offset + 12 + config * 2]); @@ -981,10 +980,10 @@ init_io_restrict_pll(struct nvbios *bios, uint16_t offset, setPLL(bios, reg, freq * 10); - return true; + return len; } -static bool +static int init_end_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1002,12 +1001,12 @@ init_end_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) * we're not in repeat mode */ if (iexec->repeat) - return false; + return 0; - return true; + return 1; } -static bool +static int init_copy(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1036,7 +1035,7 @@ init_copy(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t crtcdata; if (!iexec->execute) - return true; + return 11; BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Shift: 0x%02X, SrcMask: 0x%02X, " "Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X\n", @@ -1055,10 +1054,10 @@ init_copy(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) crtcdata |= (uint8_t)data; bios_idxprt_wr(bios, crtcport, crtcindex, crtcdata); - return true; + return 11; } -static bool +static int init_not(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1074,10 +1073,10 @@ init_not(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) BIOSLOG(bios, "0x%04X: ------ Executing following commands ------\n", offset); iexec->execute = !iexec->execute; - return true; + return 1; } -static bool +static int init_io_flag_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1095,7 +1094,7 @@ init_io_flag_condition(struct nvbios *bios, uint16_t offset, uint8_t cond = bios->data[offset + 1]; if (!iexec->execute) - return true; + return 2; if (io_flag_condition_met(bios, offset, cond)) BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset); @@ -1104,10 +1103,10 @@ init_io_flag_condition(struct nvbios *bios, uint16_t offset, iexec->execute = false; } - return true; + return 2; } -static bool +static int init_idx_addr_latched(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1135,11 +1134,12 @@ init_idx_addr_latched(struct nvbios *bios, uint16_t offset, uint32_t mask = ROM32(bios->data[offset + 9]); uint32_t data = ROM32(bios->data[offset + 13]); uint8_t count = bios->data[offset + 17]; + int len = 18 + count * 2; uint32_t value; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: ControlReg: 0x%08X, DataReg: 0x%08X, " "Mask: 0x%08X, Data: 0x%08X, Count: 0x%02X\n", @@ -1159,10 +1159,10 @@ init_idx_addr_latched(struct nvbios *bios, uint16_t offset, bios_wr32(bios, controlreg, value); } - return true; + return len; } -static bool +static int init_io_restrict_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1191,25 +1191,26 @@ init_io_restrict_pll2(struct nvbios *bios, uint16_t offset, uint8_t shift = bios->data[offset + 5]; uint8_t count = bios->data[offset + 6]; uint32_t reg = ROM32(bios->data[offset + 7]); + int len = 11 + count * 4; uint8_t config; uint32_t freq; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, " "Shift: 0x%02X, Count: 0x%02X, Reg: 0x%08X\n", offset, crtcport, crtcindex, mask, shift, count, reg); if (!reg) - return true; + return len; config = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) >> shift; if (config > count) { NV_ERROR(bios->dev, "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n", offset, config, count); - return false; + return 0; } freq = ROM32(bios->data[offset + 11 + config * 4]); @@ -1219,10 +1220,10 @@ init_io_restrict_pll2(struct nvbios *bios, uint16_t offset, setPLL(bios, reg, freq); - return true; + return len; } -static bool +static int init_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1239,16 +1240,16 @@ init_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t freq = ROM32(bios->data[offset + 5]); if (!iexec->execute) - return true; + return 9; BIOSLOG(bios, "0x%04X: Reg: 0x%04X, Freq: %dkHz\n", offset, reg, freq); setPLL(bios, reg, freq); - return true; + return 9; } -static bool +static int init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1272,12 +1273,13 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t i2c_index = bios->data[offset + 1]; uint8_t i2c_address = bios->data[offset + 2]; uint8_t count = bios->data[offset + 3]; + int len = 4 + count * 3; struct nouveau_i2c_chan *chan; struct i2c_msg msg; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, " "Count: 0x%02X\n", @@ -1285,7 +1287,7 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) chan = init_i2c_device_find(bios->dev, i2c_index); if (!chan) - return false; + return 0; for (i = 0; i < count; i++) { uint8_t i2c_reg = bios->data[offset + 4 + i * 3]; @@ -1298,7 +1300,7 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) msg.len = 1; msg.buf = &value; if (i2c_transfer(&chan->adapter, &msg, 1) != 1) - return false; + return 0; BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: 0x%02X, " "Mask: 0x%02X, Data: 0x%02X\n", @@ -1312,14 +1314,14 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) msg.len = 1; msg.buf = &value; if (i2c_transfer(&chan->adapter, &msg, 1) != 1) - return false; + return 0; } } - return true; + return len; } -static bool +static int init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1341,12 +1343,13 @@ init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t i2c_index = bios->data[offset + 1]; uint8_t i2c_address = bios->data[offset + 2]; uint8_t count = bios->data[offset + 3]; + int len = 4 + count * 2; struct nouveau_i2c_chan *chan; struct i2c_msg msg; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, " "Count: 0x%02X\n", @@ -1354,7 +1357,7 @@ init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) chan = init_i2c_device_find(bios->dev, i2c_index); if (!chan) - return false; + return 0; for (i = 0; i < count; i++) { uint8_t i2c_reg = bios->data[offset + 4 + i * 2]; @@ -1369,14 +1372,14 @@ init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) msg.len = 1; msg.buf = &data; if (i2c_transfer(&chan->adapter, &msg, 1) != 1) - return false; + return 0; } } - return true; + return len; } -static bool +static int init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1396,13 +1399,14 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t i2c_index = bios->data[offset + 1]; uint8_t i2c_address = bios->data[offset + 2]; uint8_t count = bios->data[offset + 3]; + int len = 4 + count; struct nouveau_i2c_chan *chan; struct i2c_msg msg; uint8_t data[256]; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, " "Count: 0x%02X\n", @@ -1410,7 +1414,7 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) chan = init_i2c_device_find(bios->dev, i2c_index); if (!chan) - return false; + return 0; for (i = 0; i < count; i++) { data[i] = bios->data[offset + 4 + i]; @@ -1424,13 +1428,13 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) msg.len = count; msg.buf = data; if (i2c_transfer(&chan->adapter, &msg, 1) != 1) - return false; + return 0; } - return true; + return len; } -static bool +static int init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1455,7 +1459,7 @@ init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t reg, value; if (!iexec->execute) - return true; + return 5; BIOSLOG(bios, "0x%04X: MagicLookupValue: 0x%02X, TMDSAddr: 0x%02X, " "Mask: 0x%02X, Data: 0x%02X\n", @@ -1463,7 +1467,7 @@ init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) reg = get_tmds_index_reg(bios->dev, mlv); if (!reg) - return false; + return 0; bios_wr32(bios, reg, tmdsaddr | NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE); @@ -1471,10 +1475,10 @@ init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) bios_wr32(bios, reg + 4, value); bios_wr32(bios, reg, tmdsaddr); - return true; + return 5; } -static bool +static int init_zm_tmds_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1495,18 +1499,19 @@ init_zm_tmds_group(struct nvbios *bios, uint16_t offset, uint8_t mlv = bios->data[offset + 1]; uint8_t count = bios->data[offset + 2]; + int len = 3 + count * 2; uint32_t reg; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: MagicLookupValue: 0x%02X, Count: 0x%02X\n", offset, mlv, count); reg = get_tmds_index_reg(bios->dev, mlv); if (!reg) - return false; + return 0; for (i = 0; i < count; i++) { uint8_t tmdsaddr = bios->data[offset + 3 + i * 2]; @@ -1516,10 +1521,10 @@ init_zm_tmds_group(struct nvbios *bios, uint16_t offset, bios_wr32(bios, reg, tmdsaddr); } - return true; + return len; } -static bool +static int init_cr_idx_adr_latch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1542,11 +1547,12 @@ init_cr_idx_adr_latch(struct nvbios *bios, uint16_t offset, uint8_t crtcindex2 = bios->data[offset + 2]; uint8_t baseaddr = bios->data[offset + 3]; uint8_t count = bios->data[offset + 4]; + int len = 5 + count; uint8_t oldaddr, data; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: Index1: 0x%02X, Index2: 0x%02X, " "BaseAddr: 0x%02X, Count: 0x%02X\n", @@ -1563,10 +1569,10 @@ init_cr_idx_adr_latch(struct nvbios *bios, uint16_t offset, bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex1, oldaddr); - return true; + return len; } -static bool +static int init_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1587,7 +1593,7 @@ init_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t value; if (!iexec->execute) - return true; + return 4; BIOSLOG(bios, "0x%04X: Index: 0x%02X, Mask: 0x%02X, Data: 0x%02X\n", offset, crtcindex, mask, data); @@ -1596,10 +1602,10 @@ init_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) value |= data; bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex, value); - return true; + return 4; } -static bool +static int init_zm_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1616,14 +1622,14 @@ init_zm_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t data = bios->data[offset + 2]; if (!iexec->execute) - return true; + return 3; bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex, data); - return true; + return 3; } -static bool +static int init_zm_cr_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1640,18 +1646,19 @@ init_zm_cr_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) */ uint8_t count = bios->data[offset + 1]; + int len = 2 + count * 2; int i; if (!iexec->execute) - return true; + return len; for (i = 0; i < count; i++) init_zm_cr(bios, offset + 2 + 2 * i - 1, iexec); - return true; + return len; } -static bool +static int init_condition_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1675,7 +1682,7 @@ init_condition_time(struct nvbios *bios, uint16_t offset, unsigned cnt; if (!iexec->execute) - return true; + return 3; if (retries > 100) retries = 100; @@ -1706,10 +1713,10 @@ init_condition_time(struct nvbios *bios, uint16_t offset, iexec->execute = false; } - return true; + return 3; } -static bool +static int init_zm_reg_sequence(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1729,10 +1736,11 @@ init_zm_reg_sequence(struct nvbios *bios, uint16_t offset, uint32_t basereg = ROM32(bios->data[offset + 1]); uint32_t count = bios->data[offset + 5]; + int len = 6 + count * 4; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: BaseReg: 0x%08X, Count: 0x%02X\n", offset, basereg, count); @@ -1744,10 +1752,10 @@ init_zm_reg_sequence(struct nvbios *bios, uint16_t offset, bios_wr32(bios, reg, data); } - return true; + return len; } -static bool +static int init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1763,7 +1771,7 @@ init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint16_t sub_offset = ROM16(bios->data[offset + 1]); if (!iexec->execute) - return true; + return 3; BIOSLOG(bios, "0x%04X: Executing subroutine at 0x%04X\n", offset, sub_offset); @@ -1772,10 +1780,10 @@ init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) BIOSLOG(bios, "0x%04X: End of 0x%04X subroutine\n", offset, sub_offset); - return true; + return 3; } -static bool +static int init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1803,7 +1811,7 @@ init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t srcvalue, dstvalue; if (!iexec->execute) - return true; + return 22; BIOSLOG(bios, "0x%04X: SrcReg: 0x%08X, Shift: 0x%02X, SrcMask: 0x%08X, " "Xor: 0x%08X, DstReg: 0x%08X, DstMask: 0x%08X\n", @@ -1822,10 +1830,10 @@ init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) bios_wr32(bios, dstreg, dstvalue | srcvalue); - return true; + return 22; } -static bool +static int init_zm_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1843,14 +1851,14 @@ init_zm_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t data = bios->data[offset + 4]; if (!iexec->execute) - return true; + return 5; bios_idxprt_wr(bios, crtcport, crtcindex, data); - return true; + return 5; } -static bool +static int init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1899,7 +1907,7 @@ init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) struct drm_nouveau_private *dev_priv = bios->dev->dev_private; if (dev_priv->card_type >= NV_50) - return true; + return 1; /* * On every card I've seen, this step gets done for us earlier in @@ -1917,10 +1925,10 @@ init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) /* write back the saved configuration value */ bios_wr32(bios, NV_PFB_CFG0, bios->state.saved_nv_pfb_cfg0); - return true; + return 1; } -static bool +static int init_reset(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1954,10 +1962,10 @@ init_reset(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) pci_nv_20 &= ~NV_PBUS_PCI_NV_20_ROM_SHADOW_ENABLED; /* 0xfffffffe */ bios_wr32(bios, NV_PBUS_PCI_NV_20, pci_nv_20); - return true; + return 13; } -static bool +static int init_configure_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1978,7 +1986,7 @@ init_configure_mem(struct nvbios *bios, uint16_t offset, uint32_t reg, data; if (bios->major_version > 2) - return false; + return 0; bios_idxprt_wr(bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX, bios_idxprt_rd( bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX) | 0x20); @@ -2010,10 +2018,10 @@ init_configure_mem(struct nvbios *bios, uint16_t offset, bios_wr32(bios, reg, data); } - return true; + return 1; } -static bool +static int init_configure_clk(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2033,7 +2041,7 @@ init_configure_clk(struct nvbios *bios, uint16_t offset, int clock; if (bios->major_version > 2) - return false; + return 0; clock = ROM16(bios->data[meminitoffs + 4]) * 10; setPLL(bios, NV_PRAMDAC_NVPLL_COEFF, clock); @@ -2043,10 +2051,10 @@ init_configure_clk(struct nvbios *bios, uint16_t offset, clock *= 2; setPLL(bios, NV_PRAMDAC_MPLL_COEFF, clock); - return true; + return 1; } -static bool +static int init_configure_preinit(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2066,15 +2074,15 @@ init_configure_preinit(struct nvbios *bios, uint16_t offset, uint8_t cr3c = ((straps << 2) & 0xf0) | (straps & (1 << 6)); if (bios->major_version > 2) - return false; + return 0; bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_SCRATCH4__INDEX, cr3c); - return true; + return 1; } -static bool +static int init_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2094,7 +2102,7 @@ init_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t data = bios->data[offset + 4]; if (!iexec->execute) - return true; + return 5; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Mask: 0x%02X, Data: 0x%02X\n", offset, crtcport, mask, data); @@ -2153,15 +2161,15 @@ init_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) for (i = 0; i < 2; i++) bios_wr32(bios, 0x614108 + (i*0x800), bios_rd32( bios, 0x614108 + (i*0x800)) & 0x0fffffff); - return true; + return 5; } bios_port_wr(bios, crtcport, (bios_port_rd(bios, crtcport) & mask) | data); - return true; + return 5; } -static bool +static int init_sub(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2176,7 +2184,7 @@ init_sub(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t sub = bios->data[offset + 1]; if (!iexec->execute) - return true; + return 2; BIOSLOG(bios, "0x%04X: Calling script %d\n", offset, sub); @@ -2186,10 +2194,10 @@ init_sub(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) BIOSLOG(bios, "0x%04X: End of script %d\n", offset, sub); - return true; + return 2; } -static bool +static int init_ram_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2210,7 +2218,7 @@ init_ram_condition(struct nvbios *bios, uint16_t offset, uint8_t data; if (!iexec->execute) - return true; + return 3; data = bios_rd32(bios, NV_PFB_BOOT_0) & mask; @@ -2224,10 +2232,10 @@ init_ram_condition(struct nvbios *bios, uint16_t offset, iexec->execute = false; } - return true; + return 3; } -static bool +static int init_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2246,17 +2254,17 @@ init_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t data = ROM32(bios->data[offset + 9]); if (!iexec->execute) - return true; + return 13; BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Mask: 0x%08X, Data: 0x%08X\n", offset, reg, mask, data); bios_wr32(bios, reg, (bios_rd32(bios, reg) & mask) | data); - return true; + return 13; } -static bool +static int init_macro(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2280,7 +2288,7 @@ init_macro(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) int i; if (!iexec->execute) - return true; + return 2; BIOSLOG(bios, "0x%04X: Macro: 0x%02X, MacroTableIndex: 0x%02X, " "Count: 0x%02X\n", @@ -2295,10 +2303,10 @@ init_macro(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) bios_wr32(bios, reg, data); } - return true; + return 2; } -static bool +static int init_done(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2310,10 +2318,10 @@ init_done(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) */ /* mild retval abuse to stop parsing this table */ - return false; + return 0; } -static bool +static int init_resume(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2325,15 +2333,15 @@ init_resume(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) */ if (iexec->execute) - return true; + return 1; iexec->execute = true; BIOSLOG(bios, "0x%04X: ---- Executing following commands ----\n", offset); - return true; + return 1; } -static bool +static int init_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2348,7 +2356,7 @@ init_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) unsigned time = ROM16(bios->data[offset + 1]); if (!iexec->execute) - return true; + return 3; BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X microseconds\n", offset, time); @@ -2358,10 +2366,10 @@ init_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) else msleep((time + 900) / 1000); - return true; + return 3; } -static bool +static int init_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2378,7 +2386,7 @@ init_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t cond = bios->data[offset + 1]; if (!iexec->execute) - return true; + return 2; BIOSLOG(bios, "0x%04X: Condition: 0x%02X\n", offset, cond); @@ -2389,10 +2397,10 @@ init_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) iexec->execute = false; } - return true; + return 2; } -static bool +static int init_io_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2409,7 +2417,7 @@ init_io_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t cond = bios->data[offset + 1]; if (!iexec->execute) - return true; + return 2; BIOSLOG(bios, "0x%04X: IO condition: 0x%02X\n", offset, cond); @@ -2420,10 +2428,10 @@ init_io_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) iexec->execute = false; } - return true; + return 2; } -static bool +static int init_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2446,7 +2454,7 @@ init_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t value; if (!iexec->execute) - return true; + return 6; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, " "Data: 0x%02X\n", @@ -2455,10 +2463,10 @@ init_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) value = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) | data; bios_idxprt_wr(bios, crtcport, crtcindex, value); - return true; + return 6; } -static bool +static int init_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2476,16 +2484,16 @@ init_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint16_t freq = ROM16(bios->data[offset + 5]); if (!iexec->execute) - return true; + return 7; BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Freq: %d0kHz\n", offset, reg, freq); setPLL(bios, reg, freq * 10); - return true; + return 7; } -static bool +static int init_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2502,17 +2510,17 @@ init_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t value = ROM32(bios->data[offset + 5]); if (!iexec->execute) - return true; + return 9; if (reg == 0x000200) value |= 1; bios_wr32(bios, reg, value); - return true; + return 9; } -static bool +static int init_ram_restrict_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2538,14 +2546,15 @@ init_ram_restrict_pll(struct nvbios *bios, uint16_t offset, uint8_t type = bios->data[offset + 1]; uint32_t freq = ROM32(bios->data[offset + 2 + (index * 4)]); uint8_t *pll_limits = &bios->data[bios->pll_limit_tbl_ptr], *entry; + int len = 2 + bios->ram_restrict_group_count * 4; int i; if (!iexec->execute) - return true; + return len; if (!bios->pll_limit_tbl_ptr || (pll_limits[0] & 0xf0) != 0x30) { NV_ERROR(dev, "PLL limits table not version 3.x\n"); - return true; /* deliberate, allow default clocks to remain */ + return len; /* deliberate, allow default clocks to remain */ } entry = pll_limits + pll_limits[1]; @@ -2558,15 +2567,15 @@ init_ram_restrict_pll(struct nvbios *bios, uint16_t offset, offset, type, reg, freq); setPLL(bios, reg, freq); - return true; + return len; } } NV_ERROR(dev, "PLL type 0x%02x not found in PLL limits table", type); - return true; + return len; } -static bool +static int init_8c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2576,10 +2585,10 @@ init_8c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) * */ - return true; + return 1; } -static bool +static int init_8d(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2589,10 +2598,10 @@ init_8d(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) * */ - return true; + return 1; } -static bool +static int init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2610,14 +2619,17 @@ init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) const uint8_t *gpio_entry; int i; + if (!iexec->execute) + return 1; + if (bios->bdcb.version != 0x40) { NV_ERROR(bios->dev, "DCB table not version 4.0\n"); - return false; + return 0; } if (!bios->bdcb.gpio_table_ptr) { NV_WARN(bios->dev, "Invalid pointer to INIT_8E table\n"); - return false; + return 0; } gpio_entry = gpio_table + gpio_table[1]; @@ -2655,13 +2667,10 @@ init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) bios_wr32(bios, r, v); } - return true; + return 1; } -/* hack to avoid moving the itbl_entry array before this function */ -int init_ram_restrict_zm_reg_group_blocklen; - -static bool +static int init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2687,21 +2696,21 @@ init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset, uint8_t regincrement = bios->data[offset + 5]; uint8_t count = bios->data[offset + 6]; uint32_t strap_ramcfg, data; - uint16_t blocklen; + /* previously set by 'M' BIT table */ + uint16_t blocklen = bios->ram_restrict_group_count * 4; + int len = 7 + count * blocklen; uint8_t index; int i; - /* previously set by 'M' BIT table */ - blocklen = init_ram_restrict_zm_reg_group_blocklen; if (!iexec->execute) - return true; + return len; if (!blocklen) { NV_ERROR(bios->dev, "0x%04X: Zero block length - has the M table " "been parsed?\n", offset); - return false; + return 0; } strap_ramcfg = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 2) & 0xf; @@ -2719,10 +2728,10 @@ init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset, reg += regincrement; } - return true; + return len; } -static bool +static int init_copy_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2739,14 +2748,14 @@ init_copy_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t dstreg = ROM32(bios->data[offset + 5]); if (!iexec->execute) - return true; + return 9; bios_wr32(bios, dstreg, bios_rd32(bios, srcreg)); - return true; + return 9; } -static bool +static int init_zm_reg_group_addr_latched(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2764,20 +2773,21 @@ init_zm_reg_group_addr_latched(struct nvbios *bios, uint16_t offset, uint32_t reg = ROM32(bios->data[offset + 1]); uint8_t count = bios->data[offset + 5]; + int len = 6 + count * 4; int i; if (!iexec->execute) - return true; + return len; for (i = 0; i < count; i++) { uint32_t data = ROM32(bios->data[offset + 6 + 4 * i]); bios_wr32(bios, reg, data); } - return true; + return len; } -static bool +static int init_reserved(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2788,10 +2798,10 @@ init_reserved(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) * Seemingly does nothing */ - return true; + return 1; } -static bool +static int init_96(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2824,13 +2834,13 @@ init_96(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) val <<= bios->data[offset + 16]; if (!iexec->execute) - return true; + return 17; bios_wr32(bios, reg, (bios_rd32(bios, reg) & mask) | val); - return true; + return 17; } -static bool +static int init_97(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2854,13 +2864,13 @@ init_97(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) val = (val & mask) | ((val + add) & ~mask); if (!iexec->execute) - return true; + return 13; bios_wr32(bios, reg, val); - return true; + return 13; } -static bool +static int init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2878,32 +2888,33 @@ init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) struct drm_device *dev = bios->dev; struct nouveau_i2c_chan *auxch; uint32_t addr = ROM32(bios->data[offset + 1]); - uint8_t len = bios->data[offset + 5]; + uint8_t count = bios->data[offset + 5]; + int len = 6 + count * 2; int ret, i; if (!bios->display.output) { NV_ERROR(dev, "INIT_AUXCH: no active output\n"); - return false; + return 0; } auxch = init_i2c_device_find(dev, bios->display.output->i2c_index); if (!auxch) { NV_ERROR(dev, "INIT_AUXCH: couldn't get auxch %d\n", bios->display.output->i2c_index); - return false; + return 0; } if (!iexec->execute) - return true; + return len; offset += 6; - for (i = 0; i < len; i++, offset += 2) { + for (i = 0; i < count; i++, offset += 2) { uint8_t data; ret = nouveau_dp_auxch(auxch, 9, addr, &data, 1); if (ret) { NV_ERROR(dev, "INIT_AUXCH: rd auxch fail %d\n", ret); - return false; + return 0; } data &= bios->data[offset + 0]; @@ -2912,14 +2923,14 @@ init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) ret = nouveau_dp_auxch(auxch, 8, addr, &data, 1); if (ret) { NV_ERROR(dev, "INIT_AUXCH: wr auxch fail %d\n", ret); - return false; + return 0; } } - return true; + return len; } -static bool +static int init_zm_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2936,106 +2947,99 @@ init_zm_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) struct drm_device *dev = bios->dev; struct nouveau_i2c_chan *auxch; uint32_t addr = ROM32(bios->data[offset + 1]); - uint8_t len = bios->data[offset + 5]; + uint8_t count = bios->data[offset + 5]; + int len = 6 + count; int ret, i; if (!bios->display.output) { NV_ERROR(dev, "INIT_ZM_AUXCH: no active output\n"); - return false; + return 0; } auxch = init_i2c_device_find(dev, bios->display.output->i2c_index); if (!auxch) { NV_ERROR(dev, "INIT_ZM_AUXCH: couldn't get auxch %d\n", bios->display.output->i2c_index); - return false; + return 0; } if (!iexec->execute) - return true; + return len; offset += 6; - for (i = 0; i < len; i++, offset++) { + for (i = 0; i < count; i++, offset++) { ret = nouveau_dp_auxch(auxch, 8, addr, &bios->data[offset], 1); if (ret) { NV_ERROR(dev, "INIT_ZM_AUXCH: wr auxch fail %d\n", ret); - return false; + return 0; } } - return true; + return len; } static struct init_tbl_entry itbl_entry[] = { /* command name , id , length , offset , mult , command handler */ /* INIT_PROG (0x31, 15, 10, 4) removed due to no example of use */ - { "INIT_IO_RESTRICT_PROG" , 0x32, 11 , 6 , 4 , init_io_restrict_prog }, - { "INIT_REPEAT" , 0x33, 2 , 0 , 0 , init_repeat }, - { "INIT_IO_RESTRICT_PLL" , 0x34, 12 , 7 , 2 , init_io_restrict_pll }, - { "INIT_END_REPEAT" , 0x36, 1 , 0 , 0 , init_end_repeat }, - { "INIT_COPY" , 0x37, 11 , 0 , 0 , init_copy }, - { "INIT_NOT" , 0x38, 1 , 0 , 0 , init_not }, - { "INIT_IO_FLAG_CONDITION" , 0x39, 2 , 0 , 0 , init_io_flag_condition }, - { "INIT_INDEX_ADDRESS_LATCHED" , 0x49, 18 , 17 , 2 , init_idx_addr_latched }, - { "INIT_IO_RESTRICT_PLL2" , 0x4A, 11 , 6 , 4 , init_io_restrict_pll2 }, - { "INIT_PLL2" , 0x4B, 9 , 0 , 0 , init_pll2 }, - { "INIT_I2C_BYTE" , 0x4C, 4 , 3 , 3 , init_i2c_byte }, - { "INIT_ZM_I2C_BYTE" , 0x4D, 4 , 3 , 2 , init_zm_i2c_byte }, - { "INIT_ZM_I2C" , 0x4E, 4 , 3 , 1 , init_zm_i2c }, - { "INIT_TMDS" , 0x4F, 5 , 0 , 0 , init_tmds }, - { "INIT_ZM_TMDS_GROUP" , 0x50, 3 , 2 , 2 , init_zm_tmds_group }, - { "INIT_CR_INDEX_ADDRESS_LATCHED" , 0x51, 5 , 4 , 1 , init_cr_idx_adr_latch }, - { "INIT_CR" , 0x52, 4 , 0 , 0 , init_cr }, - { "INIT_ZM_CR" , 0x53, 3 , 0 , 0 , init_zm_cr }, - { "INIT_ZM_CR_GROUP" , 0x54, 2 , 1 , 2 , init_zm_cr_group }, - { "INIT_CONDITION_TIME" , 0x56, 3 , 0 , 0 , init_condition_time }, - { "INIT_ZM_REG_SEQUENCE" , 0x58, 6 , 5 , 4 , init_zm_reg_sequence }, + { "INIT_IO_RESTRICT_PROG" , 0x32, init_io_restrict_prog }, + { "INIT_REPEAT" , 0x33, init_repeat }, + { "INIT_IO_RESTRICT_PLL" , 0x34, init_io_restrict_pll }, + { "INIT_END_REPEAT" , 0x36, init_end_repeat }, + { "INIT_COPY" , 0x37, init_copy }, + { "INIT_NOT" , 0x38, init_not }, + { "INIT_IO_FLAG_CONDITION" , 0x39, init_io_flag_condition }, + { "INIT_INDEX_ADDRESS_LATCHED" , 0x49, init_idx_addr_latched }, + { "INIT_IO_RESTRICT_PLL2" , 0x4A, init_io_restrict_pll2 }, + { "INIT_PLL2" , 0x4B, init_pll2 }, + { "INIT_I2C_BYTE" , 0x4C, init_i2c_byte }, + { "INIT_ZM_I2C_BYTE" , 0x4D, init_zm_i2c_byte }, + { "INIT_ZM_I2C" , 0x4E, init_zm_i2c }, + { "INIT_TMDS" , 0x4F, init_tmds }, + { "INIT_ZM_TMDS_GROUP" , 0x50, init_zm_tmds_group }, + { "INIT_CR_INDEX_ADDRESS_LATCHED" , 0x51, init_cr_idx_adr_latch }, + { "INIT_CR" , 0x52, init_cr }, + { "INIT_ZM_CR" , 0x53, init_zm_cr }, + { "INIT_ZM_CR_GROUP" , 0x54, init_zm_cr_group }, + { "INIT_CONDITION_TIME" , 0x56, init_condition_time }, + { "INIT_ZM_REG_SEQUENCE" , 0x58, init_zm_reg_sequence }, /* INIT_INDIRECT_REG (0x5A, 7, 0, 0) removed due to no example of use */ - { "INIT_SUB_DIRECT" , 0x5B, 3 , 0 , 0 , init_sub_direct }, - { "INIT_COPY_NV_REG" , 0x5F, 22 , 0 , 0 , init_copy_nv_reg }, - { "INIT_ZM_INDEX_IO" , 0x62, 5 , 0 , 0 , init_zm_index_io }, - { "INIT_COMPUTE_MEM" , 0x63, 1 , 0 , 0 , init_compute_mem }, - { "INIT_RESET" , 0x65, 13 , 0 , 0 , init_reset }, - { "INIT_CONFIGURE_MEM" , 0x66, 1 , 0 , 0 , init_configure_mem }, - { "INIT_CONFIGURE_CLK" , 0x67, 1 , 0 , 0 , init_configure_clk }, - { "INIT_CONFIGURE_PREINIT" , 0x68, 1 , 0 , 0 , init_configure_preinit }, - { "INIT_IO" , 0x69, 5 , 0 , 0 , init_io }, - { "INIT_SUB" , 0x6B, 2 , 0 , 0 , init_sub }, - { "INIT_RAM_CONDITION" , 0x6D, 3 , 0 , 0 , init_ram_condition }, - { "INIT_NV_REG" , 0x6E, 13 , 0 , 0 , init_nv_reg }, - { "INIT_MACRO" , 0x6F, 2 , 0 , 0 , init_macro }, - { "INIT_DONE" , 0x71, 1 , 0 , 0 , init_done }, - { "INIT_RESUME" , 0x72, 1 , 0 , 0 , init_resume }, + { "INIT_SUB_DIRECT" , 0x5B, init_sub_direct }, + { "INIT_COPY_NV_REG" , 0x5F, init_copy_nv_reg }, + { "INIT_ZM_INDEX_IO" , 0x62, init_zm_index_io }, + { "INIT_COMPUTE_MEM" , 0x63, init_compute_mem }, + { "INIT_RESET" , 0x65, init_reset }, + { "INIT_CONFIGURE_MEM" , 0x66, init_configure_mem }, + { "INIT_CONFIGURE_CLK" , 0x67, init_configure_clk }, + { "INIT_CONFIGURE_PREINIT" , 0x68, init_configure_preinit }, + { "INIT_IO" , 0x69, init_io }, + { "INIT_SUB" , 0x6B, init_sub }, + { "INIT_RAM_CONDITION" , 0x6D, init_ram_condition }, + { "INIT_NV_REG" , 0x6E, init_nv_reg }, + { "INIT_MACRO" , 0x6F, init_macro }, + { "INIT_DONE" , 0x71, init_done }, + { "INIT_RESUME" , 0x72, init_resume }, /* INIT_RAM_CONDITION2 (0x73, 9, 0, 0) removed due to no example of use */ - { "INIT_TIME" , 0x74, 3 , 0 , 0 , init_time }, - { "INIT_CONDITION" , 0x75, 2 , 0 , 0 , init_condition }, - { "INIT_IO_CONDITION" , 0x76, 2 , 0 , 0 , init_io_condition }, - { "INIT_INDEX_IO" , 0x78, 6 , 0 , 0 , init_index_io }, - { "INIT_PLL" , 0x79, 7 , 0 , 0 , init_pll }, - { "INIT_ZM_REG" , 0x7A, 9 , 0 , 0 , init_zm_reg }, - /* INIT_RAM_RESTRICT_PLL's length is adjusted by the BIT M table */ - { "INIT_RAM_RESTRICT_PLL" , 0x87, 2 , 0 , 0 , init_ram_restrict_pll }, - { "INIT_8C" , 0x8C, 1 , 0 , 0 , init_8c }, - { "INIT_8D" , 0x8D, 1 , 0 , 0 , init_8d }, - { "INIT_GPIO" , 0x8E, 1 , 0 , 0 , init_gpio }, - /* INIT_RAM_RESTRICT_ZM_REG_GROUP's mult is loaded by M table in BIT */ - { "INIT_RAM_RESTRICT_ZM_REG_GROUP" , 0x8F, 7 , 6 , 0 , init_ram_restrict_zm_reg_group }, - { "INIT_COPY_ZM_REG" , 0x90, 9 , 0 , 0 , init_copy_zm_reg }, - { "INIT_ZM_REG_GROUP_ADDRESS_LATCHED" , 0x91, 6 , 5 , 4 , init_zm_reg_group_addr_latched }, - { "INIT_RESERVED" , 0x92, 1 , 0 , 0 , init_reserved }, - { "INIT_96" , 0x96, 17 , 0 , 0 , init_96 }, - { "INIT_97" , 0x97, 13 , 0 , 0 , init_97 }, - { "INIT_AUXCH" , 0x98, 6 , 5 , 2 , init_auxch }, - { "INIT_ZM_AUXCH" , 0x99, 6 , 5 , 1 , init_zm_auxch }, - { NULL , 0 , 0 , 0 , 0 , NULL } + { "INIT_TIME" , 0x74, init_time }, + { "INIT_CONDITION" , 0x75, init_condition }, + { "INIT_IO_CONDITION" , 0x76, init_io_condition }, + { "INIT_INDEX_IO" , 0x78, init_index_io }, + { "INIT_PLL" , 0x79, init_pll }, + { "INIT_ZM_REG" , 0x7A, init_zm_reg }, + { "INIT_RAM_RESTRICT_PLL" , 0x87, init_ram_restrict_pll }, + { "INIT_8C" , 0x8C, init_8c }, + { "INIT_8D" , 0x8D, init_8d }, + { "INIT_GPIO" , 0x8E, init_gpio }, + { "INIT_RAM_RESTRICT_ZM_REG_GROUP" , 0x8F, init_ram_restrict_zm_reg_group }, + { "INIT_COPY_ZM_REG" , 0x90, init_copy_zm_reg }, + { "INIT_ZM_REG_GROUP_ADDRESS_LATCHED" , 0x91, init_zm_reg_group_addr_latched }, + { "INIT_RESERVED" , 0x92, init_reserved }, + { "INIT_96" , 0x96, init_96 }, + { "INIT_97" , 0x97, init_97 }, + { "INIT_AUXCH" , 0x98, init_auxch }, + { "INIT_ZM_AUXCH" , 0x99, init_zm_auxch }, + { NULL , 0 , NULL } }; -static unsigned int get_init_table_entry_length(struct nvbios *bios, unsigned int offset, int i) -{ - /* Calculates the length of a given init table entry. */ - return itbl_entry[i].length + bios->data[offset + itbl_entry[i].length_offset]*itbl_entry[i].length_multiplier; -} - #define MAX_TABLE_OPS 1000 static int @@ -3051,7 +3055,7 @@ parse_init_table(struct nvbios *bios, unsigned int offset, * is changed back to EXECUTE. */ - int count = 0, i; + int count = 0, i, res; uint8_t id; /* @@ -3071,22 +3075,21 @@ parse_init_table(struct nvbios *bios, unsigned int offset, offset, itbl_entry[i].id, itbl_entry[i].name); /* execute eventual command handler */ - if (itbl_entry[i].handler) - if (!(*itbl_entry[i].handler)(bios, offset, iexec)) - break; + res = (*itbl_entry[i].handler)(bios, offset, iexec); + if (!res) + break; + /* + * Add the offset of the current command including all data + * of that command. The offset will then be pointing on the + * next op code. + */ + offset += res; } else { NV_ERROR(bios->dev, "0x%04X: Init table command not found: " "0x%02X\n", offset, id); return -ENOENT; } - - /* - * Add the offset of the current command including all data - * of that command. The offset will then be pointing on the - * next op code. - */ - offset += get_init_table_entry_length(bios, offset, i); } if (offset >= bios->length) @@ -4601,10 +4604,6 @@ parse_bit_M_tbl_entry(struct drm_device *dev, struct nvbios *bios, * stuff that we don't use - their use currently unknown */ - uint16_t rr_strap_xlat; - uint8_t rr_group_count; - int i; - /* * Older bios versions don't have a sufficiently long table for * what we want @@ -4613,24 +4612,13 @@ parse_bit_M_tbl_entry(struct drm_device *dev, struct nvbios *bios, return 0; if (bitentry->id[1] < 2) { - rr_group_count = bios->data[bitentry->offset + 2]; - rr_strap_xlat = ROM16(bios->data[bitentry->offset + 3]); + bios->ram_restrict_group_count = bios->data[bitentry->offset + 2]; + bios->ram_restrict_tbl_ptr = ROM16(bios->data[bitentry->offset + 3]); } else { - rr_group_count = bios->data[bitentry->offset + 0]; - rr_strap_xlat = ROM16(bios->data[bitentry->offset + 1]); + bios->ram_restrict_group_count = bios->data[bitentry->offset + 0]; + bios->ram_restrict_tbl_ptr = ROM16(bios->data[bitentry->offset + 1]); } - /* adjust length of INIT_87 */ - for (i = 0; itbl_entry[i].name && (itbl_entry[i].id != 0x87); i++); - itbl_entry[i].length += rr_group_count * 4; - - /* set up multiplier for INIT_RAM_RESTRICT_ZM_REG_GROUP */ - for (; itbl_entry[i].name && (itbl_entry[i].id != 0x8f); i++); - itbl_entry[i].length_multiplier = rr_group_count * 4; - - init_ram_restrict_zm_reg_group_blocklen = itbl_entry[i].length_multiplier; - bios->ram_restrict_tbl_ptr = rr_strap_xlat; - return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.h b/drivers/gpu/drm/nouveau/nouveau_bios.h index 1d5f10bd78ed..058e98c76d89 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.h +++ b/drivers/gpu/drm/nouveau/nouveau_bios.h @@ -227,6 +227,7 @@ struct nvbios { uint16_t pll_limit_tbl_ptr; uint16_t ram_restrict_tbl_ptr; + uint8_t ram_restrict_group_count; uint16_t some_script_ptr; /* BIT I + 14 */ uint16_t init96_tbl_ptr; /* BIT I + 16 */ -- GitLab From 13c5443b515109f175bb9917c578a7ae973f6851 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Mon, 14 Dec 2009 20:38:17 +0000 Subject: [PATCH 125/618] drm/nv04: Fix NV04 set_operation software method. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marcin KoÅ›cielnicki Signed-off-by: Maarten Maathuis Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv04_graph.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv04_graph.c b/drivers/gpu/drm/nouveau/nv04_graph.c index 396ee92118f6..d561d773c0f4 100644 --- a/drivers/gpu/drm/nouveau/nv04_graph.c +++ b/drivers/gpu/drm/nouveau/nv04_graph.c @@ -543,7 +543,7 @@ nv04_graph_mthd_set_operation(struct nouveau_channel *chan, int grclass, nv_wi32(dev, instance, tmp); nv_wr32(dev, NV04_PGRAPH_CTX_SWITCH1, tmp); - nv_wr32(dev, NV04_PGRAPH_CTX_CACHE1 + subc, tmp); + nv_wr32(dev, NV04_PGRAPH_CTX_CACHE1 + (subc<<2), tmp); return 0; } -- GitLab From c5804be0627508487bd9eacebf9de7f807e5d4e7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Mon, 14 Dec 2009 20:58:39 +0000 Subject: [PATCH 126/618] drm/nouveau: Add proper error handling to nouveau_card_init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marcin KoÅ›cielnicki Signed-off-by: Maarten Maathuis Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_state.c | 73 ++++++++++++++++--------- 1 file changed, 48 insertions(+), 25 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 2ed41d339f6a..9fc582432da9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -317,7 +317,7 @@ nouveau_card_init(struct drm_device *dev) /* Initialise internal driver API hooks */ ret = nouveau_init_engine_ptrs(dev); if (ret) - return ret; + goto out; engine = &dev_priv->engine; dev_priv->init_state = NOUVEAU_CARD_INIT_FAILED; @@ -325,12 +325,12 @@ nouveau_card_init(struct drm_device *dev) if (drm_core_check_feature(dev, DRIVER_MODESET)) { ret = nouveau_bios_init(dev); if (ret) - return ret; + goto out; } ret = nouveau_gpuobj_early_init(dev); if (ret) - return ret; + goto out_bios; /* Initialise instance memory, must happen before mem_init so we * know exactly how much VRAM we're able to use for "normal" @@ -338,52 +338,52 @@ nouveau_card_init(struct drm_device *dev) */ ret = engine->instmem.init(dev); if (ret) - return ret; + goto out_gpuobj_early; /* Setup the memory manager */ ret = nouveau_mem_init(dev); if (ret) - return ret; + goto out_instmem; ret = nouveau_gpuobj_init(dev); if (ret) - return ret; + goto out_mem; /* PMC */ ret = engine->mc.init(dev); if (ret) - return ret; + goto out_gpuobj; /* PTIMER */ ret = engine->timer.init(dev); if (ret) - return ret; + goto out_mc; /* PFB */ ret = engine->fb.init(dev); if (ret) - return ret; + goto out_timer; /* PGRAPH */ ret = engine->graph.init(dev); if (ret) - return ret; + goto out_fb; /* PFIFO */ ret = engine->fifo.init(dev); if (ret) - return ret; + goto out_graph; /* this call irq_preinstall, register irq handler and * call irq_postinstall */ ret = drm_irq_install(dev); if (ret) - return ret; + goto out_fifo; ret = drm_vblank_init(dev, 0); if (ret) - return ret; + goto out_irq; /* what about PVIDEO/PCRTC/PRAMDAC etc? */ @@ -391,7 +391,7 @@ nouveau_card_init(struct drm_device *dev) (struct drm_file *)-2, NvDmaFB, NvDmaTT); if (ret) - return ret; + goto out_irq; gpuobj = NULL; ret = nouveau_gpuobj_dma_new(dev_priv->channel, NV_CLASS_DMA_IN_MEMORY, @@ -399,13 +399,13 @@ nouveau_card_init(struct drm_device *dev) NV_DMA_ACCESS_RW, NV_DMA_TARGET_VIDMEM, &gpuobj); if (ret) - return ret; + goto out_irq; ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaVRAM, gpuobj, NULL); if (ret) { nouveau_gpuobj_del(dev, &gpuobj); - return ret; + goto out_irq; } gpuobj = NULL; @@ -413,25 +413,22 @@ nouveau_card_init(struct drm_device *dev) dev_priv->gart_info.aper_size, NV_DMA_ACCESS_RW, &gpuobj, NULL); if (ret) - return ret; + goto out_irq; ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaGART, gpuobj, NULL); if (ret) { nouveau_gpuobj_del(dev, &gpuobj); - return ret; + goto out_irq; } if (drm_core_check_feature(dev, DRIVER_MODESET)) { - if (dev_priv->card_type >= NV_50) { + if (dev_priv->card_type >= NV_50) ret = nv50_display_create(dev); - if (ret) - return ret; - } else { + else ret = nv04_display_create(dev); - if (ret) - return ret; - } + if (ret) + goto out_irq; } ret = nouveau_backlight_init(dev); @@ -444,6 +441,32 @@ nouveau_card_init(struct drm_device *dev) drm_helper_initial_config(dev); return 0; + +out_irq: + drm_irq_uninstall(dev); +out_fifo: + engine->fifo.takedown(dev); +out_graph: + engine->graph.takedown(dev); +out_fb: + engine->fb.takedown(dev); +out_timer: + engine->timer.takedown(dev); +out_mc: + engine->mc.takedown(dev); +out_gpuobj: + nouveau_gpuobj_takedown(dev); +out_mem: + nouveau_mem_close(dev); +out_instmem: + engine->instmem.takedown(dev); +out_gpuobj_early: + nouveau_gpuobj_late_takedown(dev); +out_bios: + nouveau_bios_takedown(dev); +out: + vga_client_register(dev->pdev, NULL, NULL, NULL); + return ret; } static void nouveau_card_takedown(struct drm_device *dev) -- GitLab From 22fbd53809eb7a1b00fe09159fe0a565fb6c725c Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Fri, 11 Dec 2009 18:40:17 +0100 Subject: [PATCH 127/618] drm/nouveau: Fix up buffer eviction, and evict them to GART, if possible. Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bo.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index aa2dfbc3e351..e9f01906c52e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -400,10 +400,16 @@ nouveau_bo_evict_flags(struct ttm_buffer_object *bo, struct ttm_placement *pl) struct nouveau_bo *nvbo = nouveau_bo(bo); switch (bo->mem.mem_type) { + case TTM_PL_VRAM: + nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_TT | + TTM_PL_FLAG_SYSTEM); + break; default: nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_SYSTEM); break; } + + *pl = nvbo->placement; } -- GitLab From 15bee69ee1532a29e13124b298027ee6ef54bac8 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Mon, 14 Dec 2009 15:00:30 +0100 Subject: [PATCH 128/618] drm/nv10: Add the initial graph context and soft methods needed for LMA. Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv10_graph.c | 197 +++++++++++++++++++++------ 1 file changed, 154 insertions(+), 43 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv10_graph.c b/drivers/gpu/drm/nouveau/nv10_graph.c index 6bf6804bb0ef..6870e0ee2e7e 100644 --- a/drivers/gpu/drm/nouveau/nv10_graph.c +++ b/drivers/gpu/drm/nouveau/nv10_graph.c @@ -389,49 +389,50 @@ struct graph_state { int nv10[ARRAY_SIZE(nv10_graph_ctx_regs)]; int nv17[ARRAY_SIZE(nv17_graph_ctx_regs)]; struct pipe_state pipe_state; + uint32_t lma_window[4]; }; +#define PIPE_SAVE(dev, state, addr) \ + do { \ + int __i; \ + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, addr); \ + for (__i = 0; __i < ARRAY_SIZE(state); __i++) \ + state[__i] = nv_rd32(dev, NV10_PGRAPH_PIPE_DATA); \ + } while (0) + +#define PIPE_RESTORE(dev, state, addr) \ + do { \ + int __i; \ + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, addr); \ + for (__i = 0; __i < ARRAY_SIZE(state); __i++) \ + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, state[__i]); \ + } while (0) + static void nv10_graph_save_pipe(struct nouveau_channel *chan) { struct drm_device *dev = chan->dev; struct graph_state *pgraph_ctx = chan->pgraph_ctx; - struct pipe_state *fifo_pipe_state = &pgraph_ctx->pipe_state; - int i; -#define PIPE_SAVE(addr) \ - do { \ - nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, addr); \ - for (i = 0; i < ARRAY_SIZE(fifo_pipe_state->pipe_##addr); i++) \ - fifo_pipe_state->pipe_##addr[i] = nv_rd32(dev, NV10_PGRAPH_PIPE_DATA); \ - } while (0) - - PIPE_SAVE(0x4400); - PIPE_SAVE(0x0200); - PIPE_SAVE(0x6400); - PIPE_SAVE(0x6800); - PIPE_SAVE(0x6c00); - PIPE_SAVE(0x7000); - PIPE_SAVE(0x7400); - PIPE_SAVE(0x7800); - PIPE_SAVE(0x0040); - PIPE_SAVE(0x0000); - -#undef PIPE_SAVE + struct pipe_state *pipe = &pgraph_ctx->pipe_state; + + PIPE_SAVE(dev, pipe->pipe_0x4400, 0x4400); + PIPE_SAVE(dev, pipe->pipe_0x0200, 0x0200); + PIPE_SAVE(dev, pipe->pipe_0x6400, 0x6400); + PIPE_SAVE(dev, pipe->pipe_0x6800, 0x6800); + PIPE_SAVE(dev, pipe->pipe_0x6c00, 0x6c00); + PIPE_SAVE(dev, pipe->pipe_0x7000, 0x7000); + PIPE_SAVE(dev, pipe->pipe_0x7400, 0x7400); + PIPE_SAVE(dev, pipe->pipe_0x7800, 0x7800); + PIPE_SAVE(dev, pipe->pipe_0x0040, 0x0040); + PIPE_SAVE(dev, pipe->pipe_0x0000, 0x0000); } static void nv10_graph_load_pipe(struct nouveau_channel *chan) { struct drm_device *dev = chan->dev; struct graph_state *pgraph_ctx = chan->pgraph_ctx; - struct pipe_state *fifo_pipe_state = &pgraph_ctx->pipe_state; - int i; + struct pipe_state *pipe = &pgraph_ctx->pipe_state; uint32_t xfmode0, xfmode1; -#define PIPE_RESTORE(addr) \ - do { \ - nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, addr); \ - for (i = 0; i < ARRAY_SIZE(fifo_pipe_state->pipe_##addr); i++) \ - nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, fifo_pipe_state->pipe_##addr[i]); \ - } while (0) - + int i; nouveau_wait_for_idle(dev); /* XXX check haiku comments */ @@ -457,24 +458,22 @@ static void nv10_graph_load_pipe(struct nouveau_channel *chan) nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000008); - PIPE_RESTORE(0x0200); + PIPE_RESTORE(dev, pipe->pipe_0x0200, 0x0200); nouveau_wait_for_idle(dev); /* restore XFMODE */ nv_wr32(dev, NV10_PGRAPH_XFMODE0, xfmode0); nv_wr32(dev, NV10_PGRAPH_XFMODE1, xfmode1); - PIPE_RESTORE(0x6400); - PIPE_RESTORE(0x6800); - PIPE_RESTORE(0x6c00); - PIPE_RESTORE(0x7000); - PIPE_RESTORE(0x7400); - PIPE_RESTORE(0x7800); - PIPE_RESTORE(0x4400); - PIPE_RESTORE(0x0000); - PIPE_RESTORE(0x0040); + PIPE_RESTORE(dev, pipe->pipe_0x6400, 0x6400); + PIPE_RESTORE(dev, pipe->pipe_0x6800, 0x6800); + PIPE_RESTORE(dev, pipe->pipe_0x6c00, 0x6c00); + PIPE_RESTORE(dev, pipe->pipe_0x7000, 0x7000); + PIPE_RESTORE(dev, pipe->pipe_0x7400, 0x7400); + PIPE_RESTORE(dev, pipe->pipe_0x7800, 0x7800); + PIPE_RESTORE(dev, pipe->pipe_0x4400, 0x4400); + PIPE_RESTORE(dev, pipe->pipe_0x0000, 0x0000); + PIPE_RESTORE(dev, pipe->pipe_0x0040, 0x0040); nouveau_wait_for_idle(dev); - -#undef PIPE_RESTORE } static void nv10_graph_create_pipe(struct nouveau_channel *chan) @@ -832,6 +831,9 @@ int nv10_graph_init(struct drm_device *dev) (1<<31)); if (dev_priv->chipset >= 0x17) { nv_wr32(dev, NV10_PGRAPH_DEBUG_4, 0x1f000000); + nv_wr32(dev, 0x400a10, 0x3ff3fb6); + nv_wr32(dev, 0x400838, 0x2f8684); + nv_wr32(dev, 0x40083c, 0x115f3f); nv_wr32(dev, 0x004006b0, 0x40000020); } else nv_wr32(dev, NV10_PGRAPH_DEBUG_4, 0x00000000); @@ -867,6 +869,115 @@ void nv10_graph_takedown(struct drm_device *dev) { } +static int +nv17_graph_mthd_lma_window(struct nouveau_channel *chan, int grclass, + int mthd, uint32_t data) +{ + struct drm_device *dev = chan->dev; + struct graph_state *ctx = chan->pgraph_ctx; + struct pipe_state *pipe = &ctx->pipe_state; + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + uint32_t pipe_0x0040[1], pipe_0x64c0[8], pipe_0x6a80[3], pipe_0x6ab0[3]; + uint32_t xfmode0, xfmode1; + int i; + + ctx->lma_window[(mthd - 0x1638) / 4] = data; + + if (mthd != 0x1644) + return 0; + + nouveau_wait_for_idle(dev); + + PIPE_SAVE(dev, pipe_0x0040, 0x0040); + PIPE_SAVE(dev, pipe->pipe_0x0200, 0x0200); + + PIPE_RESTORE(dev, ctx->lma_window, 0x6790); + + nouveau_wait_for_idle(dev); + + xfmode0 = nv_rd32(dev, NV10_PGRAPH_XFMODE0); + xfmode1 = nv_rd32(dev, NV10_PGRAPH_XFMODE1); + + PIPE_SAVE(dev, pipe->pipe_0x4400, 0x4400); + PIPE_SAVE(dev, pipe_0x64c0, 0x64c0); + PIPE_SAVE(dev, pipe_0x6ab0, 0x6ab0); + PIPE_SAVE(dev, pipe_0x6a80, 0x6a80); + + nouveau_wait_for_idle(dev); + + nv_wr32(dev, NV10_PGRAPH_XFMODE0, 0x10000000); + nv_wr32(dev, NV10_PGRAPH_XFMODE1, 0x00000000); + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x000064c0); + for (i = 0; i < 4; i++) + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x3f800000); + for (i = 0; i < 4; i++) + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000000); + + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x00006ab0); + for (i = 0; i < 3; i++) + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x3f800000); + + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x00006a80); + for (i = 0; i < 3; i++) + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000000); + + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x00000040); + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000008); + + PIPE_RESTORE(dev, pipe->pipe_0x0200, 0x0200); + + nouveau_wait_for_idle(dev); + + PIPE_RESTORE(dev, pipe_0x0040, 0x0040); + + nv_wr32(dev, NV10_PGRAPH_XFMODE0, xfmode0); + nv_wr32(dev, NV10_PGRAPH_XFMODE1, xfmode1); + + PIPE_RESTORE(dev, pipe_0x64c0, 0x64c0); + PIPE_RESTORE(dev, pipe_0x6ab0, 0x6ab0); + PIPE_RESTORE(dev, pipe_0x6a80, 0x6a80); + PIPE_RESTORE(dev, pipe->pipe_0x4400, 0x4400); + + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x000000c0); + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000000); + + nouveau_wait_for_idle(dev); + + pgraph->fifo_access(dev, true); + + return 0; +} + +static int +nv17_graph_mthd_lma_enable(struct nouveau_channel *chan, int grclass, + int mthd, uint32_t data) +{ + struct drm_device *dev = chan->dev; + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + + nouveau_wait_for_idle(dev); + + nv_wr32(dev, NV10_PGRAPH_DEBUG_4, + nv_rd32(dev, NV10_PGRAPH_DEBUG_4) | 0x1 << 8); + nv_wr32(dev, 0x004006b0, + nv_rd32(dev, 0x004006b0) | 0x8 << 24); + + pgraph->fifo_access(dev, true); + + return 0; +} + +static struct nouveau_pgraph_object_method nv17_graph_celsius_mthds[] = { + { 0x1638, nv17_graph_mthd_lma_window }, + { 0x163c, nv17_graph_mthd_lma_window }, + { 0x1640, nv17_graph_mthd_lma_window }, + { 0x1644, nv17_graph_mthd_lma_window }, + { 0x1658, nv17_graph_mthd_lma_enable }, + {} +}; + struct nouveau_pgraph_object_class nv10_graph_grclass[] = { { 0x0030, false, NULL }, /* null */ { 0x0039, false, NULL }, /* m2mf */ @@ -887,6 +998,6 @@ struct nouveau_pgraph_object_class nv10_graph_grclass[] = { { 0x0095, false, NULL }, /* multitex_tri */ { 0x0056, false, NULL }, /* celcius (nv10) */ { 0x0096, false, NULL }, /* celcius (nv11) */ - { 0x0099, false, NULL }, /* celcius (nv17) */ + { 0x0099, false, nv17_graph_celsius_mthds }, /* celcius (nv17) */ {} }; -- GitLab From 054b93e444550a72aef17115363cdef253b9ee7c Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 15 Dec 2009 22:02:47 +1000 Subject: [PATCH 129/618] drm/nv40: implement ctxprog/state generation The context programs are *very* simple compared to the ones used by the binary driver. There's notes in nv40_grctx.c explaining most of the things we don't implement. If we discover if/why any of it is required further down the track, we'll handle it then. The PGRAPH state generated for each chipset should match what NVIDIA do almost exactly (there's a couple of exceptions). If someone has a lot of time on their hands, they could figure out the mapping of object/method to PGRAPH register and demagic the initial state a little, it's not terribly important however. At time of commit, confirmed to be working at least well enough for accelerated X (and where tested, for 3D apps) on NV40, NV43, NV44, NV46, NV49, NV4A, NV4B and NV4E. A module option has been added to force the use of external firmware blobs if it becomes required. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/Makefile | 5 +- drivers/gpu/drm/nouveau/nouveau_drv.c | 4 + drivers/gpu/drm/nouveau/nouveau_drv.h | 13 +- drivers/gpu/drm/nouveau/nouveau_grctx.c | 158 ++++++ drivers/gpu/drm/nouveau/nouveau_grctx.h | 133 +++++ drivers/gpu/drm/nouveau/nv40_graph.c | 212 ++------ drivers/gpu/drm/nouveau/nv40_grctx.c | 678 ++++++++++++++++++++++++ drivers/gpu/drm/nouveau/nv50_graph.c | 10 +- 8 files changed, 1031 insertions(+), 182 deletions(-) create mode 100644 drivers/gpu/drm/nouveau/nouveau_grctx.c create mode 100644 drivers/gpu/drm/nouveau/nouveau_grctx.h create mode 100644 drivers/gpu/drm/nouveau/nv40_grctx.c diff --git a/drivers/gpu/drm/nouveau/Makefile b/drivers/gpu/drm/nouveau/Makefile index 1d90d4d0144f..48c290b5da8c 100644 --- a/drivers/gpu/drm/nouveau/Makefile +++ b/drivers/gpu/drm/nouveau/Makefile @@ -8,14 +8,15 @@ nouveau-y := nouveau_drv.o nouveau_state.o nouveau_channel.o nouveau_mem.o \ nouveau_sgdma.o nouveau_dma.o \ nouveau_bo.o nouveau_fence.o nouveau_gem.o nouveau_ttm.o \ nouveau_hw.o nouveau_calc.o nouveau_bios.o nouveau_i2c.o \ - nouveau_display.o nouveau_connector.o nouveau_fbcon.o \ - nouveau_dp.o \ + nouveau_display.o nouveau_connector.o nouveau_fbcon.o \ + nouveau_dp.o nouveau_grctx.o \ nv04_timer.o \ nv04_mc.o nv40_mc.o nv50_mc.o \ nv04_fb.o nv10_fb.o nv40_fb.o \ nv04_fifo.o nv10_fifo.o nv40_fifo.o nv50_fifo.o \ nv04_graph.o nv10_graph.o nv20_graph.o \ nv40_graph.o nv50_graph.o \ + nv40_grctx.o \ nv04_instmem.o nv50_instmem.o \ nv50_crtc.o nv50_dac.o nv50_sor.o \ nv50_cursor.o nv50_display.o nv50_fbcon.o \ diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index 35249c35118f..78662cc1c8d5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -35,6 +35,10 @@ #include "drm_pciids.h" +MODULE_PARM_DESC(ctxfw, "Use external firmware blob for grctx init (NV40)"); +int nouveau_ctxfw = 0; +module_param_named(ctxfw, nouveau_ctxfw, int, 0400); + MODULE_PARM_DESC(noagp, "Disable AGP"); int nouveau_noagp; module_param_named(noagp, nouveau_noagp, int, 0400); diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index bc6ffa5eeac7..5f8cbb79c499 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -54,6 +54,7 @@ struct nouveau_fpriv { #include "nouveau_drm.h" #include "nouveau_reg.h" #include "nouveau_bios.h" +struct nouveau_grctx; #define MAX_NUM_DCB_ENTRIES 16 @@ -317,6 +318,7 @@ struct nouveau_pgraph_engine { bool accel_blocked; void *ctxprog; void *ctxvals; + int grctx_size; int (*init)(struct drm_device *); void (*takedown)(struct drm_device *); @@ -647,6 +649,7 @@ extern int nouveau_fbpercrtc; extern char *nouveau_tv_norm; extern int nouveau_reg_debug; extern char *nouveau_vbios; +extern int nouveau_ctxfw; /* nouveau_state.c */ extern void nouveau_preclose(struct drm_device *dev, struct drm_file *); @@ -959,9 +962,7 @@ extern int nv40_graph_create_context(struct nouveau_channel *); extern void nv40_graph_destroy_context(struct nouveau_channel *); extern int nv40_graph_load_context(struct nouveau_channel *); extern int nv40_graph_unload_context(struct drm_device *); -extern int nv40_grctx_init(struct drm_device *); -extern void nv40_grctx_fini(struct drm_device *); -extern void nv40_grctx_vals_load(struct drm_device *, struct nouveau_gpuobj *); +extern void nv40_grctx_init(struct nouveau_grctx *); /* nv50_graph.c */ extern struct nouveau_pgraph_object_class nv50_graph_grclass[]; @@ -975,6 +976,12 @@ extern int nv50_graph_load_context(struct nouveau_channel *); extern int nv50_graph_unload_context(struct drm_device *); extern void nv50_graph_context_switch(struct drm_device *); +/* nouveau_grctx.c */ +extern int nouveau_grctx_prog_load(struct drm_device *); +extern void nouveau_grctx_vals_load(struct drm_device *, + struct nouveau_gpuobj *); +extern void nouveau_grctx_fini(struct drm_device *); + /* nv04_instmem.c */ extern int nv04_instmem_init(struct drm_device *); extern void nv04_instmem_takedown(struct drm_device *); diff --git a/drivers/gpu/drm/nouveau/nouveau_grctx.c b/drivers/gpu/drm/nouveau/nouveau_grctx.c new file mode 100644 index 000000000000..d5d84c87f757 --- /dev/null +++ b/drivers/gpu/drm/nouveau/nouveau_grctx.c @@ -0,0 +1,158 @@ +/* + * Copyright 2009 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Ben Skeggs + */ + +#include + +#include "drmP.h" +#include "nouveau_drv.h" + +struct nouveau_ctxprog { + uint32_t signature; + uint8_t version; + uint16_t length; + uint32_t data[]; +} __attribute__ ((packed)); + +struct nouveau_ctxvals { + uint32_t signature; + uint8_t version; + uint32_t length; + struct { + uint32_t offset; + uint32_t value; + } data[]; +} __attribute__ ((packed)); + +int +nouveau_grctx_prog_load(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + const int chipset = dev_priv->chipset; + const struct firmware *fw; + const struct nouveau_ctxprog *cp; + const struct nouveau_ctxvals *cv; + char name[32]; + int ret, i; + + if (!pgraph->ctxprog) { + sprintf(name, "nouveau/nv%02x.ctxprog", chipset); + ret = request_firmware(&fw, name, &dev->pdev->dev); + if (ret) { + NV_ERROR(dev, "No ctxprog for NV%02x\n", chipset); + return ret; + } + + pgraph->ctxprog = kmalloc(fw->size, GFP_KERNEL); + if (!pgraph->ctxprog) { + NV_ERROR(dev, "OOM copying ctxprog\n"); + release_firmware(fw); + return -ENOMEM; + } + memcpy(pgraph->ctxprog, fw->data, fw->size); + + cp = pgraph->ctxprog; + if (le32_to_cpu(cp->signature) != 0x5043564e || + cp->version != 0 || + le16_to_cpu(cp->length) != ((fw->size - 7) / 4)) { + NV_ERROR(dev, "ctxprog invalid\n"); + release_firmware(fw); + nouveau_grctx_fini(dev); + return -EINVAL; + } + release_firmware(fw); + } + + if (!pgraph->ctxvals) { + sprintf(name, "nouveau/nv%02x.ctxvals", chipset); + ret = request_firmware(&fw, name, &dev->pdev->dev); + if (ret) { + NV_ERROR(dev, "No ctxvals for NV%02x\n", chipset); + nouveau_grctx_fini(dev); + return ret; + } + + pgraph->ctxvals = kmalloc(fw->size, GFP_KERNEL); + if (!pgraph->ctxprog) { + NV_ERROR(dev, "OOM copying ctxprog\n"); + release_firmware(fw); + nouveau_grctx_fini(dev); + return -ENOMEM; + } + memcpy(pgraph->ctxvals, fw->data, fw->size); + + cv = (void *)pgraph->ctxvals; + if (le32_to_cpu(cv->signature) != 0x5643564e || + cv->version != 0 || + le32_to_cpu(cv->length) != ((fw->size - 9) / 8)) { + NV_ERROR(dev, "ctxvals invalid\n"); + release_firmware(fw); + nouveau_grctx_fini(dev); + return -EINVAL; + } + release_firmware(fw); + } + + cp = pgraph->ctxprog; + + nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0); + for (i = 0; i < le16_to_cpu(cp->length); i++) + nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, + le32_to_cpu(cp->data[i])); + + return 0; +} + +void +nouveau_grctx_fini(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + + if (pgraph->ctxprog) { + kfree(pgraph->ctxprog); + pgraph->ctxprog = NULL; + } + + if (pgraph->ctxvals) { + kfree(pgraph->ctxprog); + pgraph->ctxvals = NULL; + } +} + +void +nouveau_grctx_vals_load(struct drm_device *dev, struct nouveau_gpuobj *ctx) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + struct nouveau_ctxvals *cv = pgraph->ctxvals; + int i; + + if (!cv) + return; + + for (i = 0; i < le32_to_cpu(cv->length); i++) + nv_wo32(dev, ctx, le32_to_cpu(cv->data[i].offset), + le32_to_cpu(cv->data[i].value)); +} diff --git a/drivers/gpu/drm/nouveau/nouveau_grctx.h b/drivers/gpu/drm/nouveau/nouveau_grctx.h new file mode 100644 index 000000000000..5d39c4ce8006 --- /dev/null +++ b/drivers/gpu/drm/nouveau/nouveau_grctx.h @@ -0,0 +1,133 @@ +#ifndef __NOUVEAU_GRCTX_H__ +#define __NOUVEAU_GRCTX_H__ + +struct nouveau_grctx { + struct drm_device *dev; + + enum { + NOUVEAU_GRCTX_PROG, + NOUVEAU_GRCTX_VALS + } mode; + void *data; + + uint32_t ctxprog_max; + uint32_t ctxprog_len; + uint32_t ctxprog_reg; + int ctxprog_label[32]; + uint32_t ctxvals_pos; + uint32_t ctxvals_base; +}; + +#ifdef CP_CTX +static inline void +cp_out(struct nouveau_grctx *ctx, uint32_t inst) +{ + uint32_t *ctxprog = ctx->data; + + if (ctx->mode != NOUVEAU_GRCTX_PROG) + return; + + BUG_ON(ctx->ctxprog_len == ctx->ctxprog_max); + ctxprog[ctx->ctxprog_len++] = inst; +} + +static inline void +cp_lsr(struct nouveau_grctx *ctx, uint32_t val) +{ + cp_out(ctx, CP_LOAD_SR | val); +} + +static inline void +cp_ctx(struct nouveau_grctx *ctx, uint32_t reg, uint32_t length) +{ + ctx->ctxprog_reg = (reg - 0x00400000) >> 2; + + ctx->ctxvals_base = ctx->ctxvals_pos; + ctx->ctxvals_pos = ctx->ctxvals_base + length; + + if (length > (CP_CTX_COUNT >> CP_CTX_COUNT_SHIFT)) { + cp_lsr(ctx, length); + length = 0; + } + + cp_out(ctx, CP_CTX | (length << CP_CTX_COUNT_SHIFT) | ctx->ctxprog_reg); +} + +static inline void +cp_name(struct nouveau_grctx *ctx, int name) +{ + uint32_t *ctxprog = ctx->data; + int i; + + if (ctx->mode != NOUVEAU_GRCTX_PROG) + return; + + ctx->ctxprog_label[name] = ctx->ctxprog_len; + for (i = 0; i < ctx->ctxprog_len; i++) { + if ((ctxprog[i] & 0xfff00000) != 0xff400000) + continue; + if ((ctxprog[i] & CP_BRA_IP) != ((name) << CP_BRA_IP_SHIFT)) + continue; + ctxprog[i] = (ctxprog[i] & 0x00ff00ff) | + (ctx->ctxprog_len << CP_BRA_IP_SHIFT); + } +} + +static inline void +_cp_bra(struct nouveau_grctx *ctx, u32 mod, int flag, int state, int name) +{ + int ip = 0; + + if (mod != 2) { + ip = ctx->ctxprog_label[name] << CP_BRA_IP_SHIFT; + if (ip == 0) + ip = 0xff000000 | (name << CP_BRA_IP_SHIFT); + } + + cp_out(ctx, CP_BRA | (mod << 18) | ip | flag | + (state ? 0 : CP_BRA_IF_CLEAR)); +} +#define cp_bra(c,f,s,n) _cp_bra((c), 0, CP_FLAG_##f, CP_FLAG_##f##_##s, n) +#ifdef CP_BRA_MOD +#define cp_cal(c,f,s,n) _cp_bra((c), 1, CP_FLAG_##f, CP_FLAG_##f##_##s, n) +#define cp_ret(c,f,s) _cp_bra((c), 2, CP_FLAG_##f, CP_FLAG_##f##_##s, 0) +#endif + +static inline void +_cp_wait(struct nouveau_grctx *ctx, int flag, int state) +{ + cp_out(ctx, CP_WAIT | flag | (state ? CP_WAIT_SET : 0)); +} +#define cp_wait(c,f,s) _cp_wait((c), CP_FLAG_##f, CP_FLAG_##f##_##s) + +static inline void +_cp_set(struct nouveau_grctx *ctx, int flag, int state) +{ + cp_out(ctx, CP_SET | flag | (state ? CP_SET_1 : 0)); +} +#define cp_set(c,f,s) _cp_set((c), CP_FLAG_##f, CP_FLAG_##f##_##s) + +static inline void +cp_pos(struct nouveau_grctx *ctx, int offset) +{ + ctx->ctxvals_pos = offset; + ctx->ctxvals_base = ctx->ctxvals_pos; + + cp_lsr(ctx, ctx->ctxvals_pos); + cp_out(ctx, CP_SET_CONTEXT_POINTER); +} + +static inline void +gr_def(struct nouveau_grctx *ctx, uint32_t reg, uint32_t val) +{ + if (ctx->mode != NOUVEAU_GRCTX_VALS) + return; + + reg = (reg - 0x00400000) / 4; + reg = (reg - ctx->ctxprog_reg) + ctx->ctxvals_base; + + nv_wo32(ctx->dev, ctx->data, reg, val); +} +#endif + +#endif diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c index 7e8547cb5833..2b332bb55acf 100644 --- a/drivers/gpu/drm/nouveau/nv40_graph.c +++ b/drivers/gpu/drm/nouveau/nv40_graph.c @@ -24,36 +24,10 @@ * */ -#include - #include "drmP.h" #include "drm.h" #include "nouveau_drv.h" - -MODULE_FIRMWARE("nouveau/nv40.ctxprog"); -MODULE_FIRMWARE("nouveau/nv40.ctxvals"); -MODULE_FIRMWARE("nouveau/nv41.ctxprog"); -MODULE_FIRMWARE("nouveau/nv41.ctxvals"); -MODULE_FIRMWARE("nouveau/nv42.ctxprog"); -MODULE_FIRMWARE("nouveau/nv42.ctxvals"); -MODULE_FIRMWARE("nouveau/nv43.ctxprog"); -MODULE_FIRMWARE("nouveau/nv43.ctxvals"); -MODULE_FIRMWARE("nouveau/nv44.ctxprog"); -MODULE_FIRMWARE("nouveau/nv44.ctxvals"); -MODULE_FIRMWARE("nouveau/nv46.ctxprog"); -MODULE_FIRMWARE("nouveau/nv46.ctxvals"); -MODULE_FIRMWARE("nouveau/nv47.ctxprog"); -MODULE_FIRMWARE("nouveau/nv47.ctxvals"); -MODULE_FIRMWARE("nouveau/nv49.ctxprog"); -MODULE_FIRMWARE("nouveau/nv49.ctxvals"); -MODULE_FIRMWARE("nouveau/nv4a.ctxprog"); -MODULE_FIRMWARE("nouveau/nv4a.ctxvals"); -MODULE_FIRMWARE("nouveau/nv4b.ctxprog"); -MODULE_FIRMWARE("nouveau/nv4b.ctxvals"); -MODULE_FIRMWARE("nouveau/nv4c.ctxprog"); -MODULE_FIRMWARE("nouveau/nv4c.ctxvals"); -MODULE_FIRMWARE("nouveau/nv4e.ctxprog"); -MODULE_FIRMWARE("nouveau/nv4e.ctxvals"); +#include "nouveau_grctx.h" struct nouveau_channel * nv40_graph_channel(struct drm_device *dev) @@ -83,27 +57,30 @@ nv40_graph_create_context(struct nouveau_channel *chan) { struct drm_device *dev = chan->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_gpuobj *ctx; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; int ret; - /* Allocate a 175KiB block of PRAMIN to store the context. This - * is massive overkill for a lot of chipsets, but it should be safe - * until we're able to implement this properly (will happen at more - * or less the same time we're able to write our own context programs. - */ - ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, 175*1024, 16, - NVOBJ_FLAG_ZERO_ALLOC, - &chan->ramin_grctx); + ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, pgraph->grctx_size, + 16, NVOBJ_FLAG_ZERO_ALLOC, + &chan->ramin_grctx); if (ret) return ret; - ctx = chan->ramin_grctx->gpuobj; /* Initialise default context values */ dev_priv->engine.instmem.prepare_access(dev, true); - nv40_grctx_vals_load(dev, ctx); - nv_wo32(dev, ctx, 0, ctx->im_pramin->start); - dev_priv->engine.instmem.finish_access(dev); + if (!pgraph->ctxprog) { + struct nouveau_grctx ctx = {}; + ctx.dev = chan->dev; + ctx.mode = NOUVEAU_GRCTX_VALS; + ctx.data = chan->ramin_grctx->gpuobj; + nv40_grctx_init(&ctx); + } else { + nouveau_grctx_vals_load(dev, chan->ramin_grctx->gpuobj); + } + nv_wo32(dev, chan->ramin_grctx->gpuobj, 0, + chan->ramin_grctx->gpuobj->im_pramin->start); + dev_priv->engine.instmem.finish_access(dev); return 0; } @@ -204,139 +181,6 @@ nv40_graph_unload_context(struct drm_device *dev) return ret; } -struct nouveau_ctxprog { - uint32_t signature; - uint8_t version; - uint16_t length; - uint32_t data[]; -} __attribute__ ((packed)); - -struct nouveau_ctxvals { - uint32_t signature; - uint8_t version; - uint32_t length; - struct { - uint32_t offset; - uint32_t value; - } data[]; -} __attribute__ ((packed)); - -int -nv40_grctx_init(struct drm_device *dev) -{ - struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; - const int chipset = dev_priv->chipset; - const struct firmware *fw; - const struct nouveau_ctxprog *cp; - const struct nouveau_ctxvals *cv; - char name[32]; - int ret, i; - - pgraph->accel_blocked = true; - - if (!pgraph->ctxprog) { - sprintf(name, "nouveau/nv%02x.ctxprog", chipset); - ret = request_firmware(&fw, name, &dev->pdev->dev); - if (ret) { - NV_ERROR(dev, "No ctxprog for NV%02x\n", chipset); - return ret; - } - - pgraph->ctxprog = kmalloc(fw->size, GFP_KERNEL); - if (!pgraph->ctxprog) { - NV_ERROR(dev, "OOM copying ctxprog\n"); - release_firmware(fw); - return -ENOMEM; - } - memcpy(pgraph->ctxprog, fw->data, fw->size); - - cp = pgraph->ctxprog; - if (le32_to_cpu(cp->signature) != 0x5043564e || - cp->version != 0 || - le16_to_cpu(cp->length) != ((fw->size - 7) / 4)) { - NV_ERROR(dev, "ctxprog invalid\n"); - release_firmware(fw); - nv40_grctx_fini(dev); - return -EINVAL; - } - release_firmware(fw); - } - - if (!pgraph->ctxvals) { - sprintf(name, "nouveau/nv%02x.ctxvals", chipset); - ret = request_firmware(&fw, name, &dev->pdev->dev); - if (ret) { - NV_ERROR(dev, "No ctxvals for NV%02x\n", chipset); - nv40_grctx_fini(dev); - return ret; - } - - pgraph->ctxvals = kmalloc(fw->size, GFP_KERNEL); - if (!pgraph->ctxprog) { - NV_ERROR(dev, "OOM copying ctxprog\n"); - release_firmware(fw); - nv40_grctx_fini(dev); - return -ENOMEM; - } - memcpy(pgraph->ctxvals, fw->data, fw->size); - - cv = (void *)pgraph->ctxvals; - if (le32_to_cpu(cv->signature) != 0x5643564e || - cv->version != 0 || - le32_to_cpu(cv->length) != ((fw->size - 9) / 8)) { - NV_ERROR(dev, "ctxvals invalid\n"); - release_firmware(fw); - nv40_grctx_fini(dev); - return -EINVAL; - } - release_firmware(fw); - } - - cp = pgraph->ctxprog; - - nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0); - for (i = 0; i < le16_to_cpu(cp->length); i++) - nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, - le32_to_cpu(cp->data[i])); - - pgraph->accel_blocked = false; - return 0; -} - -void -nv40_grctx_fini(struct drm_device *dev) -{ - struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; - - if (pgraph->ctxprog) { - kfree(pgraph->ctxprog); - pgraph->ctxprog = NULL; - } - - if (pgraph->ctxvals) { - kfree(pgraph->ctxprog); - pgraph->ctxvals = NULL; - } -} - -void -nv40_grctx_vals_load(struct drm_device *dev, struct nouveau_gpuobj *ctx) -{ - struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; - struct nouveau_ctxvals *cv = pgraph->ctxvals; - int i; - - if (!cv) - return; - - for (i = 0; i < le32_to_cpu(cv->length); i++) - nv_wo32(dev, ctx, le32_to_cpu(cv->data[i].offset), - le32_to_cpu(cv->data[i].value)); -} - /* * G70 0x47 * G71 0x49 @@ -359,7 +203,26 @@ nv40_graph_init(struct drm_device *dev) nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) | NV_PMC_ENABLE_PGRAPH); - nv40_grctx_init(dev); + if (nouveau_ctxfw) { + nouveau_grctx_prog_load(dev); + dev_priv->engine.graph.grctx_size = 175 * 1024; + } + + if (!dev_priv->engine.graph.ctxprog) { + struct nouveau_grctx ctx = {}; + uint32_t cp[256]; + + ctx.dev = dev; + ctx.mode = NOUVEAU_GRCTX_PROG; + ctx.data = cp; + ctx.ctxprog_max = 256; + nv40_grctx_init(&ctx); + dev_priv->engine.graph.grctx_size = ctx.ctxvals_pos * 4; + + nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0); + for (i = 0; i < ctx.ctxprog_len; i++) + nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, cp[i]); + } /* No context present currently */ nv_wr32(dev, NV40_PGRAPH_CTXCTL_CUR, 0x00000000); @@ -539,6 +402,7 @@ nv40_graph_init(struct drm_device *dev) void nv40_graph_takedown(struct drm_device *dev) { + nouveau_grctx_fini(dev); } struct nouveau_pgraph_object_class nv40_graph_grclass[] = { diff --git a/drivers/gpu/drm/nouveau/nv40_grctx.c b/drivers/gpu/drm/nouveau/nv40_grctx.c new file mode 100644 index 000000000000..11b11c31f543 --- /dev/null +++ b/drivers/gpu/drm/nouveau/nv40_grctx.c @@ -0,0 +1,678 @@ +/* + * Copyright 2009 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Ben Skeggs + */ + +/* NVIDIA context programs handle a number of other conditions which are + * not implemented in our versions. It's not clear why NVIDIA context + * programs have this code, nor whether it's strictly necessary for + * correct operation. We'll implement additional handling if/when we + * discover it's necessary. + * + * - On context save, NVIDIA set 0x400314 bit 0 to 1 if the "3D state" + * flag is set, this gets saved into the context. + * - On context save, the context program for all cards load nsource + * into a flag register and check for ILLEGAL_MTHD. If it's set, + * opcode 0x60000d is called before resuming normal operation. + * - Some context programs check more conditions than the above. NV44 + * checks: ((nsource & 0x0857) || (0x400718 & 0x0100) || (intr & 0x0001)) + * and calls 0x60000d before resuming normal operation. + * - At the very beginning of NVIDIA's context programs, flag 9 is checked + * and if true 0x800001 is called with count=0, pos=0, the flag is cleared + * and then the ctxprog is aborted. It looks like a complicated NOP, + * its purpose is unknown. + * - In the section of code that loads the per-vs state, NVIDIA check + * flag 10. If it's set, they only transfer the small 0x300 byte block + * of state + the state for a single vs as opposed to the state for + * all vs units. It doesn't seem likely that it'll occur in normal + * operation, especially seeing as it appears NVIDIA may have screwed + * up the ctxprogs for some cards and have an invalid instruction + * rather than a cp_lsr(ctx, dwords_for_1_vs_unit) instruction. + * - There's a number of places where context offset 0 (where we place + * the PRAMIN offset of the context) is loaded into either 0x408000, + * 0x408004 or 0x408008. Not sure what's up there either. + * - The ctxprogs for some cards save 0x400a00 again during the cleanup + * path for auto-loadctx. + */ + +#define CP_FLAG_CLEAR 0 +#define CP_FLAG_SET 1 +#define CP_FLAG_SWAP_DIRECTION ((0 * 32) + 0) +#define CP_FLAG_SWAP_DIRECTION_LOAD 0 +#define CP_FLAG_SWAP_DIRECTION_SAVE 1 +#define CP_FLAG_USER_SAVE ((0 * 32) + 5) +#define CP_FLAG_USER_SAVE_NOT_PENDING 0 +#define CP_FLAG_USER_SAVE_PENDING 1 +#define CP_FLAG_USER_LOAD ((0 * 32) + 6) +#define CP_FLAG_USER_LOAD_NOT_PENDING 0 +#define CP_FLAG_USER_LOAD_PENDING 1 +#define CP_FLAG_STATUS ((3 * 32) + 0) +#define CP_FLAG_STATUS_IDLE 0 +#define CP_FLAG_STATUS_BUSY 1 +#define CP_FLAG_AUTO_SAVE ((3 * 32) + 4) +#define CP_FLAG_AUTO_SAVE_NOT_PENDING 0 +#define CP_FLAG_AUTO_SAVE_PENDING 1 +#define CP_FLAG_AUTO_LOAD ((3 * 32) + 5) +#define CP_FLAG_AUTO_LOAD_NOT_PENDING 0 +#define CP_FLAG_AUTO_LOAD_PENDING 1 +#define CP_FLAG_UNK54 ((3 * 32) + 6) +#define CP_FLAG_UNK54_CLEAR 0 +#define CP_FLAG_UNK54_SET 1 +#define CP_FLAG_ALWAYS ((3 * 32) + 8) +#define CP_FLAG_ALWAYS_FALSE 0 +#define CP_FLAG_ALWAYS_TRUE 1 +#define CP_FLAG_UNK57 ((3 * 32) + 9) +#define CP_FLAG_UNK57_CLEAR 0 +#define CP_FLAG_UNK57_SET 1 + +#define CP_CTX 0x00100000 +#define CP_CTX_COUNT 0x000fc000 +#define CP_CTX_COUNT_SHIFT 14 +#define CP_CTX_REG 0x00003fff +#define CP_LOAD_SR 0x00200000 +#define CP_LOAD_SR_VALUE 0x000fffff +#define CP_BRA 0x00400000 +#define CP_BRA_IP 0x0000ff00 +#define CP_BRA_IP_SHIFT 8 +#define CP_BRA_IF_CLEAR 0x00000080 +#define CP_BRA_FLAG 0x0000007f +#define CP_WAIT 0x00500000 +#define CP_WAIT_SET 0x00000080 +#define CP_WAIT_FLAG 0x0000007f +#define CP_SET 0x00700000 +#define CP_SET_1 0x00000080 +#define CP_SET_FLAG 0x0000007f +#define CP_NEXT_TO_SWAP 0x00600007 +#define CP_NEXT_TO_CURRENT 0x00600009 +#define CP_SET_CONTEXT_POINTER 0x0060000a +#define CP_END 0x0060000e +#define CP_LOAD_MAGIC_UNK01 0x00800001 /* unknown */ +#define CP_LOAD_MAGIC_NV44TCL 0x00800029 /* per-vs state (0x4497) */ +#define CP_LOAD_MAGIC_NV40TCL 0x00800041 /* per-vs state (0x4097) */ + +#include "drmP.h" +#include "nouveau_drv.h" +#include "nouveau_grctx.h" + +/* TODO: + * - get vs count from 0x1540 + * - document unimplemented bits compared to nvidia + * - nsource handling + * - R0 & 0x0200 handling + * - single-vs handling + * - 400314 bit 0 + */ + +static int +nv40_graph_4097(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + + if ((dev_priv->chipset & 0xf0) == 0x60) + return 0; + + return !!(0x0baf & (1 << dev_priv->chipset)); +} + +static int +nv40_graph_vs_count(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + + switch (dev_priv->chipset) { + case 0x47: + case 0x49: + case 0x4b: + return 8; + case 0x40: + return 6; + case 0x41: + case 0x42: + return 5; + case 0x43: + case 0x44: + case 0x46: + case 0x4a: + return 3; + case 0x4c: + case 0x4e: + case 0x67: + default: + return 1; + } +} + + +enum cp_label { + cp_check_load = 1, + cp_setup_auto_load, + cp_setup_load, + cp_setup_save, + cp_swap_state, + cp_swap_state3d_3_is_save, + cp_prepare_exit, + cp_exit, +}; + +static void +nv40_graph_construct_general(struct nouveau_grctx *ctx) +{ + struct drm_nouveau_private *dev_priv = ctx->dev->dev_private; + int i; + + cp_ctx(ctx, 0x4000a4, 1); + gr_def(ctx, 0x4000a4, 0x00000008); + cp_ctx(ctx, 0x400144, 58); + gr_def(ctx, 0x400144, 0x00000001); + cp_ctx(ctx, 0x400314, 1); + gr_def(ctx, 0x400314, 0x00000000); + cp_ctx(ctx, 0x400400, 10); + cp_ctx(ctx, 0x400480, 10); + cp_ctx(ctx, 0x400500, 19); + gr_def(ctx, 0x400514, 0x00040000); + gr_def(ctx, 0x400524, 0x55555555); + gr_def(ctx, 0x400528, 0x55555555); + gr_def(ctx, 0x40052c, 0x55555555); + gr_def(ctx, 0x400530, 0x55555555); + cp_ctx(ctx, 0x400560, 6); + gr_def(ctx, 0x400568, 0x0000ffff); + gr_def(ctx, 0x40056c, 0x0000ffff); + cp_ctx(ctx, 0x40057c, 5); + cp_ctx(ctx, 0x400710, 3); + gr_def(ctx, 0x400710, 0x20010001); + gr_def(ctx, 0x400714, 0x0f73ef00); + cp_ctx(ctx, 0x400724, 1); + gr_def(ctx, 0x400724, 0x02008821); + cp_ctx(ctx, 0x400770, 3); + if (dev_priv->chipset == 0x40) { + cp_ctx(ctx, 0x400814, 4); + cp_ctx(ctx, 0x400828, 5); + cp_ctx(ctx, 0x400840, 5); + gr_def(ctx, 0x400850, 0x00000040); + cp_ctx(ctx, 0x400858, 4); + gr_def(ctx, 0x400858, 0x00000040); + gr_def(ctx, 0x40085c, 0x00000040); + gr_def(ctx, 0x400864, 0x80000000); + cp_ctx(ctx, 0x40086c, 9); + gr_def(ctx, 0x40086c, 0x80000000); + gr_def(ctx, 0x400870, 0x80000000); + gr_def(ctx, 0x400874, 0x80000000); + gr_def(ctx, 0x400878, 0x80000000); + gr_def(ctx, 0x400888, 0x00000040); + gr_def(ctx, 0x40088c, 0x80000000); + cp_ctx(ctx, 0x4009c0, 8); + gr_def(ctx, 0x4009cc, 0x80000000); + gr_def(ctx, 0x4009dc, 0x80000000); + } else { + cp_ctx(ctx, 0x400840, 20); + if (!nv40_graph_4097(ctx->dev)) { + for (i = 0; i < 8; i++) + gr_def(ctx, 0x400860 + (i * 4), 0x00000001); + } + gr_def(ctx, 0x400880, 0x00000040); + gr_def(ctx, 0x400884, 0x00000040); + gr_def(ctx, 0x400888, 0x00000040); + cp_ctx(ctx, 0x400894, 11); + gr_def(ctx, 0x400894, 0x00000040); + if (nv40_graph_4097(ctx->dev)) { + for (i = 0; i < 8; i++) + gr_def(ctx, 0x4008a0 + (i * 4), 0x80000000); + } + cp_ctx(ctx, 0x4008e0, 2); + cp_ctx(ctx, 0x4008f8, 2); + if (dev_priv->chipset == 0x4c || + (dev_priv->chipset & 0xf0) == 0x60) + cp_ctx(ctx, 0x4009f8, 1); + } + cp_ctx(ctx, 0x400a00, 73); + gr_def(ctx, 0x400b0c, 0x0b0b0b0c); + cp_ctx(ctx, 0x401000, 4); + cp_ctx(ctx, 0x405004, 1); + switch (dev_priv->chipset) { + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x403448, 1); + gr_def(ctx, 0x403448, 0x00001010); + break; + default: + cp_ctx(ctx, 0x403440, 1); + switch (dev_priv->chipset) { + case 0x40: + gr_def(ctx, 0x403440, 0x00000010); + break; + case 0x44: + case 0x46: + case 0x4a: + gr_def(ctx, 0x403440, 0x00003010); + break; + case 0x41: + case 0x42: + case 0x43: + case 0x4c: + case 0x4e: + case 0x67: + default: + gr_def(ctx, 0x403440, 0x00001010); + break; + } + break; + } +} + +static void +nv40_graph_construct_state3d(struct nouveau_grctx *ctx) +{ + struct drm_nouveau_private *dev_priv = ctx->dev->dev_private; + int i; + + if (dev_priv->chipset == 0x40) { + cp_ctx(ctx, 0x401880, 51); + gr_def(ctx, 0x401940, 0x00000100); + } else + if (dev_priv->chipset == 0x46 || dev_priv->chipset == 0x47 || + dev_priv->chipset == 0x49 || dev_priv->chipset == 0x4b) { + cp_ctx(ctx, 0x401880, 32); + for (i = 0; i < 16; i++) + gr_def(ctx, 0x401880 + (i * 4), 0x00000111); + if (dev_priv->chipset == 0x46) + cp_ctx(ctx, 0x401900, 16); + cp_ctx(ctx, 0x401940, 3); + } + cp_ctx(ctx, 0x40194c, 18); + gr_def(ctx, 0x401954, 0x00000111); + gr_def(ctx, 0x401958, 0x00080060); + gr_def(ctx, 0x401974, 0x00000080); + gr_def(ctx, 0x401978, 0xffff0000); + gr_def(ctx, 0x40197c, 0x00000001); + gr_def(ctx, 0x401990, 0x46400000); + if (dev_priv->chipset == 0x40) { + cp_ctx(ctx, 0x4019a0, 2); + cp_ctx(ctx, 0x4019ac, 5); + } else { + cp_ctx(ctx, 0x4019a0, 1); + cp_ctx(ctx, 0x4019b4, 3); + } + gr_def(ctx, 0x4019bc, 0xffff0000); + switch (dev_priv->chipset) { + case 0x46: + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x4019c0, 18); + for (i = 0; i < 16; i++) + gr_def(ctx, 0x4019c0 + (i * 4), 0x88888888); + break; + } + cp_ctx(ctx, 0x401a08, 8); + gr_def(ctx, 0x401a10, 0x0fff0000); + gr_def(ctx, 0x401a14, 0x0fff0000); + gr_def(ctx, 0x401a1c, 0x00011100); + cp_ctx(ctx, 0x401a2c, 4); + cp_ctx(ctx, 0x401a44, 26); + for (i = 0; i < 16; i++) + gr_def(ctx, 0x401a44 + (i * 4), 0x07ff0000); + gr_def(ctx, 0x401a8c, 0x4b7fffff); + if (dev_priv->chipset == 0x40) { + cp_ctx(ctx, 0x401ab8, 3); + } else { + cp_ctx(ctx, 0x401ab8, 1); + cp_ctx(ctx, 0x401ac0, 1); + } + cp_ctx(ctx, 0x401ad0, 8); + gr_def(ctx, 0x401ad0, 0x30201000); + gr_def(ctx, 0x401ad4, 0x70605040); + gr_def(ctx, 0x401ad8, 0xb8a89888); + gr_def(ctx, 0x401adc, 0xf8e8d8c8); + cp_ctx(ctx, 0x401b10, dev_priv->chipset == 0x40 ? 2 : 1); + gr_def(ctx, 0x401b10, 0x40100000); + cp_ctx(ctx, 0x401b18, dev_priv->chipset == 0x40 ? 6 : 5); + gr_def(ctx, 0x401b28, dev_priv->chipset == 0x40 ? + 0x00000004 : 0x00000000); + cp_ctx(ctx, 0x401b30, 25); + gr_def(ctx, 0x401b34, 0x0000ffff); + gr_def(ctx, 0x401b68, 0x435185d6); + gr_def(ctx, 0x401b6c, 0x2155b699); + gr_def(ctx, 0x401b70, 0xfedcba98); + gr_def(ctx, 0x401b74, 0x00000098); + gr_def(ctx, 0x401b84, 0xffffffff); + gr_def(ctx, 0x401b88, 0x00ff7000); + gr_def(ctx, 0x401b8c, 0x0000ffff); + if (dev_priv->chipset != 0x44 && dev_priv->chipset != 0x4a && + dev_priv->chipset != 0x4e) + cp_ctx(ctx, 0x401b94, 1); + cp_ctx(ctx, 0x401b98, 8); + gr_def(ctx, 0x401b9c, 0x00ff0000); + cp_ctx(ctx, 0x401bc0, 9); + gr_def(ctx, 0x401be0, 0x00ffff00); + cp_ctx(ctx, 0x401c00, 192); + for (i = 0; i < 16; i++) { /* fragment texture units */ + gr_def(ctx, 0x401c40 + (i * 4), 0x00018488); + gr_def(ctx, 0x401c80 + (i * 4), 0x00028202); + gr_def(ctx, 0x401d00 + (i * 4), 0x0000aae4); + gr_def(ctx, 0x401d40 + (i * 4), 0x01012000); + gr_def(ctx, 0x401d80 + (i * 4), 0x00080008); + gr_def(ctx, 0x401e00 + (i * 4), 0x00100008); + } + for (i = 0; i < 4; i++) { /* vertex texture units */ + gr_def(ctx, 0x401e90 + (i * 4), 0x0001bc80); + gr_def(ctx, 0x401ea0 + (i * 4), 0x00000202); + gr_def(ctx, 0x401ec0 + (i * 4), 0x00000008); + gr_def(ctx, 0x401ee0 + (i * 4), 0x00080008); + } + cp_ctx(ctx, 0x400f5c, 3); + gr_def(ctx, 0x400f5c, 0x00000002); + cp_ctx(ctx, 0x400f84, 1); +} + +static void +nv40_graph_construct_state3d_2(struct nouveau_grctx *ctx) +{ + struct drm_nouveau_private *dev_priv = ctx->dev->dev_private; + int i; + + cp_ctx(ctx, 0x402000, 1); + cp_ctx(ctx, 0x402404, dev_priv->chipset == 0x40 ? 1 : 2); + switch (dev_priv->chipset) { + case 0x40: + gr_def(ctx, 0x402404, 0x00000001); + break; + case 0x4c: + case 0x4e: + case 0x67: + gr_def(ctx, 0x402404, 0x00000020); + break; + case 0x46: + case 0x49: + case 0x4b: + gr_def(ctx, 0x402404, 0x00000421); + break; + default: + gr_def(ctx, 0x402404, 0x00000021); + } + if (dev_priv->chipset != 0x40) + gr_def(ctx, 0x402408, 0x030c30c3); + switch (dev_priv->chipset) { + case 0x44: + case 0x46: + case 0x4a: + case 0x4c: + case 0x4e: + case 0x67: + cp_ctx(ctx, 0x402440, 1); + gr_def(ctx, 0x402440, 0x00011001); + break; + default: + break; + } + cp_ctx(ctx, 0x402480, dev_priv->chipset == 0x40 ? 8 : 9); + gr_def(ctx, 0x402488, 0x3e020200); + gr_def(ctx, 0x40248c, 0x00ffffff); + switch (dev_priv->chipset) { + case 0x40: + gr_def(ctx, 0x402490, 0x60103f00); + break; + case 0x47: + gr_def(ctx, 0x402490, 0x40103f00); + break; + case 0x41: + case 0x42: + case 0x49: + case 0x4b: + gr_def(ctx, 0x402490, 0x20103f00); + break; + default: + gr_def(ctx, 0x402490, 0x0c103f00); + break; + } + gr_def(ctx, 0x40249c, dev_priv->chipset <= 0x43 ? + 0x00020000 : 0x00040000); + cp_ctx(ctx, 0x402500, 31); + gr_def(ctx, 0x402530, 0x00008100); + if (dev_priv->chipset == 0x40) + cp_ctx(ctx, 0x40257c, 6); + cp_ctx(ctx, 0x402594, 16); + cp_ctx(ctx, 0x402800, 17); + gr_def(ctx, 0x402800, 0x00000001); + switch (dev_priv->chipset) { + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x402864, 1); + gr_def(ctx, 0x402864, 0x00001001); + cp_ctx(ctx, 0x402870, 3); + gr_def(ctx, 0x402878, 0x00000003); + if (dev_priv->chipset != 0x47) { /* belong at end!! */ + cp_ctx(ctx, 0x402900, 1); + cp_ctx(ctx, 0x402940, 1); + cp_ctx(ctx, 0x402980, 1); + cp_ctx(ctx, 0x4029c0, 1); + cp_ctx(ctx, 0x402a00, 1); + cp_ctx(ctx, 0x402a40, 1); + cp_ctx(ctx, 0x402a80, 1); + cp_ctx(ctx, 0x402ac0, 1); + } + break; + case 0x40: + cp_ctx(ctx, 0x402844, 1); + gr_def(ctx, 0x402844, 0x00000001); + cp_ctx(ctx, 0x402850, 1); + break; + default: + cp_ctx(ctx, 0x402844, 1); + gr_def(ctx, 0x402844, 0x00001001); + cp_ctx(ctx, 0x402850, 2); + gr_def(ctx, 0x402854, 0x00000003); + break; + } + + cp_ctx(ctx, 0x402c00, 4); + gr_def(ctx, 0x402c00, dev_priv->chipset == 0x40 ? + 0x80800001 : 0x00888001); + switch (dev_priv->chipset) { + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x402c20, 40); + for (i = 0; i < 32; i++) + gr_def(ctx, 0x402c40 + (i * 4), 0xffffffff); + cp_ctx(ctx, 0x4030b8, 13); + gr_def(ctx, 0x4030dc, 0x00000005); + gr_def(ctx, 0x4030e8, 0x0000ffff); + break; + default: + cp_ctx(ctx, 0x402c10, 4); + if (dev_priv->chipset == 0x40) + cp_ctx(ctx, 0x402c20, 36); + else + if (dev_priv->chipset <= 0x42) + cp_ctx(ctx, 0x402c20, 24); + else + if (dev_priv->chipset <= 0x4a) + cp_ctx(ctx, 0x402c20, 16); + else + cp_ctx(ctx, 0x402c20, 8); + cp_ctx(ctx, 0x402cb0, dev_priv->chipset == 0x40 ? 12 : 13); + gr_def(ctx, 0x402cd4, 0x00000005); + if (dev_priv->chipset != 0x40) + gr_def(ctx, 0x402ce0, 0x0000ffff); + break; + } + + cp_ctx(ctx, 0x403400, dev_priv->chipset == 0x40 ? 4 : 3); + cp_ctx(ctx, 0x403410, dev_priv->chipset == 0x40 ? 4 : 3); + cp_ctx(ctx, 0x403420, nv40_graph_vs_count(ctx->dev)); + for (i = 0; i < nv40_graph_vs_count(ctx->dev); i++) + gr_def(ctx, 0x403420 + (i * 4), 0x00005555); + + if (dev_priv->chipset != 0x40) { + cp_ctx(ctx, 0x403600, 1); + gr_def(ctx, 0x403600, 0x00000001); + } + cp_ctx(ctx, 0x403800, 1); + + cp_ctx(ctx, 0x403c18, 1); + gr_def(ctx, 0x403c18, 0x00000001); + switch (dev_priv->chipset) { + case 0x46: + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x405018, 1); + gr_def(ctx, 0x405018, 0x08e00001); + cp_ctx(ctx, 0x405c24, 1); + gr_def(ctx, 0x405c24, 0x000e3000); + break; + } + if (dev_priv->chipset != 0x4e) + cp_ctx(ctx, 0x405800, 11); + cp_ctx(ctx, 0x407000, 1); +} + +static void +nv40_graph_construct_state3d_3(struct nouveau_grctx *ctx) +{ + int len = nv40_graph_4097(ctx->dev) ? 0x0684 : 0x0084; + + cp_out (ctx, 0x300000); + cp_lsr (ctx, len - 4); + cp_bra (ctx, SWAP_DIRECTION, SAVE, cp_swap_state3d_3_is_save); + cp_lsr (ctx, len); + cp_name(ctx, cp_swap_state3d_3_is_save); + cp_out (ctx, 0x800001); + + ctx->ctxvals_pos += len; +} + +static void +nv40_graph_construct_shader(struct nouveau_grctx *ctx) +{ + struct drm_device *dev = ctx->dev; + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_gpuobj *obj = ctx->data; + int vs, vs_nr, vs_len, vs_nr_b0, vs_nr_b1, b0_offset, b1_offset; + int offset, i; + + vs_nr = nv40_graph_vs_count(ctx->dev); + vs_nr_b0 = 363; + vs_nr_b1 = dev_priv->chipset == 0x40 ? 128 : 64; + if (dev_priv->chipset == 0x40) { + b0_offset = 0x2200/4; /* 33a0 */ + b1_offset = 0x55a0/4; /* 1500 */ + vs_len = 0x6aa0/4; + } else + if (dev_priv->chipset == 0x41 || dev_priv->chipset == 0x42) { + b0_offset = 0x2200/4; /* 2200 */ + b1_offset = 0x4400/4; /* 0b00 */ + vs_len = 0x4f00/4; + } else { + b0_offset = 0x1d40/4; /* 2200 */ + b1_offset = 0x3f40/4; /* 0b00 : 0a40 */ + vs_len = nv40_graph_4097(dev) ? 0x4a40/4 : 0x4980/4; + } + + cp_lsr(ctx, vs_len * vs_nr + 0x300/4); + cp_out(ctx, nv40_graph_4097(dev) ? 0x800041 : 0x800029); + + offset = ctx->ctxvals_pos; + ctx->ctxvals_pos += (0x0300/4 + (vs_nr * vs_len)); + + if (ctx->mode != NOUVEAU_GRCTX_VALS) + return; + + offset += 0x0280/4; + for (i = 0; i < 16; i++, offset += 2) + nv_wo32(dev, obj, offset, 0x3f800000); + + for (vs = 0; vs < vs_nr; vs++, offset += vs_len) { + for (i = 0; i < vs_nr_b0 * 6; i += 6) + nv_wo32(dev, obj, offset + b0_offset + i, 0x00000001); + for (i = 0; i < vs_nr_b1 * 4; i += 4) + nv_wo32(dev, obj, offset + b1_offset + i, 0x3f800000); + } +} + +void +nv40_grctx_init(struct nouveau_grctx *ctx) +{ + /* decide whether we're loading/unloading the context */ + cp_bra (ctx, AUTO_SAVE, PENDING, cp_setup_save); + cp_bra (ctx, USER_SAVE, PENDING, cp_setup_save); + + cp_name(ctx, cp_check_load); + cp_bra (ctx, AUTO_LOAD, PENDING, cp_setup_auto_load); + cp_bra (ctx, USER_LOAD, PENDING, cp_setup_load); + cp_bra (ctx, ALWAYS, TRUE, cp_exit); + + /* setup for context load */ + cp_name(ctx, cp_setup_auto_load); + cp_wait(ctx, STATUS, IDLE); + cp_out (ctx, CP_NEXT_TO_SWAP); + cp_name(ctx, cp_setup_load); + cp_wait(ctx, STATUS, IDLE); + cp_set (ctx, SWAP_DIRECTION, LOAD); + cp_out (ctx, 0x00910880); /* ?? */ + cp_out (ctx, 0x00901ffe); /* ?? */ + cp_out (ctx, 0x01940000); /* ?? */ + cp_lsr (ctx, 0x20); + cp_out (ctx, 0x0060000b); /* ?? */ + cp_wait(ctx, UNK57, CLEAR); + cp_out (ctx, 0x0060000c); /* ?? */ + cp_bra (ctx, ALWAYS, TRUE, cp_swap_state); + + /* setup for context save */ + cp_name(ctx, cp_setup_save); + cp_set (ctx, SWAP_DIRECTION, SAVE); + + /* general PGRAPH state */ + cp_name(ctx, cp_swap_state); + cp_pos (ctx, 0x00020/4); + nv40_graph_construct_general(ctx); + cp_wait(ctx, STATUS, IDLE); + + /* 3D state, block 1 */ + cp_bra (ctx, UNK54, CLEAR, cp_prepare_exit); + nv40_graph_construct_state3d(ctx); + cp_wait(ctx, STATUS, IDLE); + + /* 3D state, block 2 */ + nv40_graph_construct_state3d_2(ctx); + + /* Some other block of "random" state */ + nv40_graph_construct_state3d_3(ctx); + + /* Per-vertex shader state */ + cp_pos (ctx, ctx->ctxvals_pos); + nv40_graph_construct_shader(ctx); + + /* pre-exit state updates */ + cp_name(ctx, cp_prepare_exit); + cp_bra (ctx, SWAP_DIRECTION, SAVE, cp_check_load); + cp_bra (ctx, USER_SAVE, PENDING, cp_exit); + cp_out (ctx, CP_NEXT_TO_CURRENT); + + cp_name(ctx, cp_exit); + cp_set (ctx, USER_SAVE, NOT_PENDING); + cp_set (ctx, USER_LOAD, NOT_PENDING); + cp_out (ctx, CP_END); +} + diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c index 177d8229336f..ca79f32be44c 100644 --- a/drivers/gpu/drm/nouveau/nv50_graph.c +++ b/drivers/gpu/drm/nouveau/nv50_graph.c @@ -107,9 +107,13 @@ nv50_graph_init_regs(struct drm_device *dev) static int nv50_graph_init_ctxctl(struct drm_device *dev) { + struct drm_nouveau_private *dev_priv = dev->dev_private; + NV_DEBUG(dev, "\n"); - nv40_grctx_init(dev); + nouveau_grctx_prog_load(dev); + if (!dev_priv->engine.graph.ctxprog) + dev_priv->engine.graph.accel_blocked = true; nv_wr32(dev, 0x400320, 4); nv_wr32(dev, NV40_PGRAPH_CTXCTL_CUR, 0); @@ -140,7 +144,7 @@ void nv50_graph_takedown(struct drm_device *dev) { NV_DEBUG(dev, "\n"); - nv40_grctx_fini(dev); + nouveau_grctx_fini(dev); } void @@ -207,7 +211,7 @@ nv50_graph_create_context(struct nouveau_channel *chan) dev_priv->engine.instmem.finish_access(dev); dev_priv->engine.instmem.prepare_access(dev, true); - nv40_grctx_vals_load(dev, ctx); + nouveau_grctx_vals_load(dev, ctx); nv_wo32(dev, ctx, 0x00000/4, chan->ramin->instance >> 12); if ((dev_priv->chipset & 0xf0) == 0xa0) nv_wo32(dev, ctx, 0x00004/4, 0x00000000); -- GitLab From 3c8868d3dbba5110bd43b49879f12d1a6b2a28ca Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 16 Dec 2009 14:51:13 +1000 Subject: [PATCH 130/618] drm/nv50: fix two potential suspend/resume oopses This avoids touching the dummy channel 0/127 we have on nv50. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drv.c | 2 +- drivers/gpu/drm/nouveau/nv50_fifo.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index 78662cc1c8d5..58c717247f26 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -277,7 +277,7 @@ nouveau_pci_resume(struct pci_dev *pdev) for (i = 0; i < dev_priv->engine.fifo.channels; i++) { chan = dev_priv->fifos[i]; - if (!chan) + if (!chan || !chan->pushbuf_bo) continue; for (j = 0; j < NOUVEAU_DMA_SKIPS; j++) diff --git a/drivers/gpu/drm/nouveau/nv50_fifo.c b/drivers/gpu/drm/nouveau/nv50_fifo.c index 77ae1aaa0bce..b7282284f080 100644 --- a/drivers/gpu/drm/nouveau/nv50_fifo.c +++ b/drivers/gpu/drm/nouveau/nv50_fifo.c @@ -416,7 +416,7 @@ nv50_fifo_unload_context(struct drm_device *dev) NV_DEBUG(dev, "\n"); chid = pfifo->channel_id(dev); - if (chid < 0 || chid >= dev_priv->engine.fifo.channels) + if (chid < 1 || chid >= dev_priv->engine.fifo.channels - 1) return 0; chan = dev_priv->fifos[chid]; -- GitLab From 0735f62e116fae1e4f36237a97de28e8a56b4c2c Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 16 Dec 2009 14:28:55 +1000 Subject: [PATCH 131/618] drm/nouveau: prevent all channel creation if accel not available Previously, if there was no firmware available, the DRM would just disable channel creation from userspace, but still use a single channel for its own purposes. With a bit of care it should actually be possible to do this, due to the DRM's very limited use of the engine. It currently doesn't work correctly however, resulting in corrupted fbcon and hangs on a number of cards. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bo.c | 8 +-- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 20 +++--- drivers/gpu/drm/nouveau/nouveau_state.c | 84 +++++++++++++++---------- 3 files changed, 64 insertions(+), 48 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index e9f01906c52e..2f5d47021106 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -461,11 +461,8 @@ nouveau_bo_move_m2mf(struct ttm_buffer_object *bo, int evict, int no_wait, int ret; chan = nvbo->channel; - if (!chan || nvbo->tile_flags || nvbo->no_vm) { + if (!chan || nvbo->tile_flags || nvbo->no_vm) chan = dev_priv->channel; - if (!chan) - return -EINVAL; - } src_offset = old_mem->mm_node->start << PAGE_SHIFT; dst_offset = new_mem->mm_node->start << PAGE_SHIFT; @@ -631,7 +628,8 @@ nouveau_bo_move(struct ttm_buffer_object *bo, bool evict, bool intr, return ret; } - if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE) + if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE || + !dev_priv->channel) return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); if (old_mem->mem_type == TTM_PL_SYSTEM && !bo->ttm) { diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 489d49268119..84af25c238b6 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -58,7 +58,7 @@ nouveau_fbcon_sync(struct fb_info *info) struct nouveau_channel *chan = dev_priv->channel; int ret, i; - if (!chan->accel_done || + if (!chan || !chan->accel_done || info->state != FBINFO_STATE_RUNNING || info->flags & FBINFO_HWACCEL_DISABLED) return 0; @@ -318,14 +318,16 @@ nouveau_fbcon_create(struct drm_device *dev, uint32_t fb_width, par->nouveau_fb = nouveau_fb; par->dev = dev; - switch (dev_priv->card_type) { - case NV_50: - nv50_fbcon_accel_init(info); - break; - default: - nv04_fbcon_accel_init(info); - break; - }; + if (dev_priv->channel) { + switch (dev_priv->card_type) { + case NV_50: + nv50_fbcon_accel_init(info); + break; + default: + nv04_fbcon_accel_init(info); + break; + }; + } nouveau_fbcon_zfill(dev); diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 9fc582432da9..e76ec2d207a9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -299,12 +299,57 @@ nouveau_vga_set_decode(void *priv, bool state) return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM; } +static int +nouveau_card_init_channel(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_gpuobj *gpuobj; + int ret; + + ret = nouveau_channel_alloc(dev, &dev_priv->channel, + (struct drm_file *)-2, + NvDmaFB, NvDmaTT); + if (ret) + return ret; + + gpuobj = NULL; + ret = nouveau_gpuobj_dma_new(dev_priv->channel, NV_CLASS_DMA_IN_MEMORY, + 0, nouveau_mem_fb_amount(dev), + NV_DMA_ACCESS_RW, NV_DMA_TARGET_VIDMEM, + &gpuobj); + if (ret) + goto out_err; + + ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaVRAM, + gpuobj, NULL); + if (ret) + goto out_err; + + gpuobj = NULL; + ret = nouveau_gpuobj_gart_dma_new(dev_priv->channel, 0, + dev_priv->gart_info.aper_size, + NV_DMA_ACCESS_RW, &gpuobj, NULL); + if (ret) + goto out_err; + + ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaGART, + gpuobj, NULL); + if (ret) + goto out_err; + + return 0; +out_err: + nouveau_gpuobj_del(dev, &gpuobj); + nouveau_channel_free(dev_priv->channel); + dev_priv->channel = NULL; + return ret; +} + int nouveau_card_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_engine *engine; - struct nouveau_gpuobj *gpuobj; int ret; NV_DEBUG(dev, "prev state = %d\n", dev_priv->init_state); @@ -387,39 +432,10 @@ nouveau_card_init(struct drm_device *dev) /* what about PVIDEO/PCRTC/PRAMDAC etc? */ - ret = nouveau_channel_alloc(dev, &dev_priv->channel, - (struct drm_file *)-2, - NvDmaFB, NvDmaTT); - if (ret) - goto out_irq; - - gpuobj = NULL; - ret = nouveau_gpuobj_dma_new(dev_priv->channel, NV_CLASS_DMA_IN_MEMORY, - 0, nouveau_mem_fb_amount(dev), - NV_DMA_ACCESS_RW, NV_DMA_TARGET_VIDMEM, - &gpuobj); - if (ret) - goto out_irq; - - ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaVRAM, - gpuobj, NULL); - if (ret) { - nouveau_gpuobj_del(dev, &gpuobj); - goto out_irq; - } - - gpuobj = NULL; - ret = nouveau_gpuobj_gart_dma_new(dev_priv->channel, 0, - dev_priv->gart_info.aper_size, - NV_DMA_ACCESS_RW, &gpuobj, NULL); - if (ret) - goto out_irq; - - ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaGART, - gpuobj, NULL); - if (ret) { - nouveau_gpuobj_del(dev, &gpuobj); - goto out_irq; + if (!engine->graph.accel_blocked) { + ret = nouveau_card_init_channel(dev); + if (ret) + goto out_irq; } if (drm_core_check_feature(dev, DRIVER_MODESET)) { -- GitLab From 65ec01a9406327f22b1c740f8a42cb93eb676eb5 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 16 Dec 2009 15:07:45 +1000 Subject: [PATCH 132/618] drm/nv50: fix suspend/resume delays without firmware present Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_grctx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_grctx.c b/drivers/gpu/drm/nouveau/nouveau_grctx.c index d5d84c87f757..419f4c2b3b89 100644 --- a/drivers/gpu/drm/nouveau/nouveau_grctx.c +++ b/drivers/gpu/drm/nouveau/nouveau_grctx.c @@ -56,6 +56,9 @@ nouveau_grctx_prog_load(struct drm_device *dev) char name[32]; int ret, i; + if (pgraph->accel_blocked) + return -ENODEV; + if (!pgraph->ctxprog) { sprintf(name, "nouveau/nv%02x.ctxprog", chipset); ret = request_firmware(&fw, name, &dev->pdev->dev); -- GitLab From 37cb3e08852be92d94e6a65c489bd8afa2e8a15f Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 16 Dec 2009 16:22:42 +1000 Subject: [PATCH 133/618] drm/nouveau: fix bug causing pinned buffers to lose their NO_EVICT flag Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bo.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 2f5d47021106..0cad6d834eb2 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -154,6 +154,11 @@ nouveau_bo_placement_set(struct nouveau_bo *nvbo, uint32_t memtype) nvbo->placement.busy_placement = nvbo->placements; nvbo->placement.num_placement = n; nvbo->placement.num_busy_placement = n; + + if (nvbo->pin_refcnt) { + while (n--) + nvbo->placements[n] |= TTM_PL_FLAG_NO_EVICT; + } } int -- GitLab From 5df974009fe513c664303de24725ea0f8b47f12e Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Wed, 16 Dec 2009 13:48:04 +0800 Subject: [PATCH 134/618] x86: Add IA32_TSC_AUX MSR and use it Clean up write_tsc() and write_tscp_aux() by replacing hardcoded values. No change in functionality. Signed-off-by: Sheng Yang Cc: Avi Kivity Cc: Marcelo Tosatti LKML-Reference: <1260942485-19156-4-git-send-email-sheng@linux.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/msr-index.h | 1 + arch/x86/include/asm/msr.h | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 4ffe09b2ad75..ac98d2914ebf 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -12,6 +12,7 @@ #define MSR_FS_BASE 0xc0000100 /* 64bit FS base */ #define MSR_GS_BASE 0xc0000101 /* 64bit GS base */ #define MSR_KERNEL_GS_BASE 0xc0000102 /* SwapGS GS shadow */ +#define MSR_TSC_AUX 0xc0000103 /* Auxiliary TSC */ /* EFER bits: */ #define _EFER_SCE 0 /* SYSCALL/SYSRET */ diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index 2d228fc9b4b7..cf985aa00660 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -240,9 +240,9 @@ do { \ #define checking_wrmsrl(msr, val) wrmsr_safe((msr), (u32)(val), \ (u32)((val) >> 32)) -#define write_tsc(val1, val2) wrmsr(0x10, (val1), (val2)) +#define write_tsc(val1, val2) wrmsr(MSR_IA32_TSC, (val1), (val2)) -#define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0) +#define write_rdtscp_aux(val) wrmsr(MSR_TSC_AUX, (val), 0) struct msr *msrs_alloc(void); void msrs_free(struct msr *msrs); -- GitLab From 5c3804629e69bf48474bb53038d5dcc5a8d25959 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 16 Dec 2009 16:41:30 +0800 Subject: [PATCH 135/618] revert "[ARM] pxa/cm-x300: add PWM backlight support" Commit db205463fd24c0972ad2c4e4fafb1c76e51b4380 was incorrectly applied, and reverted here to re-apply. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/Kconfig | 1 - arch/arm/mach-pxa/cm-x300.c | 30 ------------------------------ arch/arm/mach-pxa/devices.c | 1 - 3 files changed, 32 deletions(-) diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index e6d8e10ae5d1..6f4f475bbc3d 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -240,7 +240,6 @@ config MACH_COLIBRI300 select PXA3xx select CPU_PXA300 select CPU_PXA310 - select HAVE_PWM config MACH_COLIBRI320 bool "Toradex Colibri PXA320" diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index d37cfa132a65..d564d8ea5a33 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include @@ -51,7 +50,6 @@ #include #include "generic.h" -#include "devices.h" #define CM_X300_ETH_PHYS 0x08000010 @@ -162,9 +160,6 @@ static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = { /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, - - /* PWM Backlight */ - GPIO19_PWM2_OUT, }; static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = { @@ -295,30 +290,6 @@ static void __init cm_x300_init_lcd(void) static inline void cm_x300_init_lcd(void) {} #endif -#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) -static struct platform_pwm_backlight_data cm_x300_backlight_data = { - .pwm_id = 2, - .max_brightness = 100, - .dft_brightness = 100, - .pwm_period_ns = 10000, -}; - -static struct platform_device cm_x300_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &pxa27x_device_pwm0.dev, - .platform_data = &cm_x300_backlight_data, - }, -}; - -static void cm_x300_init_bl(void) -{ - platform_device_register(&cm_x300_backlight_device); -} -#else -static inline void cm_x300_init_bl(void) {} -#endif - #if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE) #define GPIO_LCD_BASE (144) #define GPIO_LCD_DIN (GPIO_LCD_BASE + 8) /* aux_gpio3_0 */ @@ -683,7 +654,6 @@ static void __init cm_x300_init(void) cm_x300_init_rtc(); cm_x300_init_ac97(); cm_x300_init_wi2wi(); - cm_x300_init_bl(); } static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 3395463bb5a6..d4cc41d04b25 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,7 +4,6 @@ #include #include -#include #include #include #include -- GitLab From 61e0ac03c8223d875de93da099737fbd45ff1492 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 10 Nov 2009 14:18:41 +0200 Subject: [PATCH 136/618] [ARM] pxa/cm-x300: add PWM backlight support Signed-off-by: Igor Grinberg Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao --- arch/arm/mach-pxa/Kconfig | 2 ++ arch/arm/mach-pxa/cm-x300.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 32 insertions(+) diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 6f4f475bbc3d..8a0837ea0294 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -110,6 +110,8 @@ config MACH_CM_X300 bool "CompuLab CM-X300 modules" select PXA3xx select CPU_PXA300 + select CPU_PXA310 + select HAVE_PWM config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index d564d8ea5a33..d37cfa132a65 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -50,6 +51,7 @@ #include #include "generic.h" +#include "devices.h" #define CM_X300_ETH_PHYS 0x08000010 @@ -160,6 +162,9 @@ static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = { /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, + + /* PWM Backlight */ + GPIO19_PWM2_OUT, }; static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = { @@ -290,6 +295,30 @@ static void __init cm_x300_init_lcd(void) static inline void cm_x300_init_lcd(void) {} #endif +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct platform_pwm_backlight_data cm_x300_backlight_data = { + .pwm_id = 2, + .max_brightness = 100, + .dft_brightness = 100, + .pwm_period_ns = 10000, +}; + +static struct platform_device cm_x300_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &cm_x300_backlight_data, + }, +}; + +static void cm_x300_init_bl(void) +{ + platform_device_register(&cm_x300_backlight_device); +} +#else +static inline void cm_x300_init_bl(void) {} +#endif + #if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE) #define GPIO_LCD_BASE (144) #define GPIO_LCD_DIN (GPIO_LCD_BASE + 8) /* aux_gpio3_0 */ @@ -654,6 +683,7 @@ static void __init cm_x300_init(void) cm_x300_init_rtc(); cm_x300_init_ac97(); cm_x300_init_wi2wi(); + cm_x300_init_bl(); } static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, -- GitLab From a328e95b82c1b8483ae5ab2f809140664d7f6c92 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 1 Oct 2009 15:43:32 -0700 Subject: [PATCH 137/618] leds: LED driver for Intel NAS SS4200 series (v5) This code is based on a driver that came in the "Open-source and GPL components" download here: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Server+Products&ProductLine=Intel%C2%AE+Storage+Systems&ProductProduct=Intel%C2%AE+Entry+Storage+System+SS4200-E&OSVersion=OS+Independent It was in a file called nasgpio.c inside of a second zip file called SS4200-E_Linux_SIO_Driver-v1.4.zip and is based on this updated to use the LED subsystem with the ioctl and hardware monitor support removed. I don't have any need for brightness control, and its code is *completely* separate from the on/off controls implemented here. If anyone else wants it, I'd be happy to look into adding it, but I don't care enough for now. Except for the probe routines, I rewrote most of it. I also Note that I don't have any hardware documentation except for the original driver. Thanks go to Arjan for his help in getting the original source for this released and for chasing down some licensing issues. Signed-off-by: Dave Hansen Signed-off-by: Richard Purdie --- drivers/leds/Kconfig | 9 + drivers/leds/Makefile | 1 + drivers/leds/leds-ss4200.c | 552 +++++++++++++++++++++++++++++++++++++ 3 files changed, 562 insertions(+) create mode 100644 drivers/leds/leds-ss4200.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index e4f599f20e38..e481d3c52a54 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -236,6 +236,15 @@ config LEDS_BD2802 This option enables support for BD2802GU RGB LED driver chips accessed via the I2C bus. +config LEDS_INTEL_SS4200 + tristate "LED driver for Intel NAS SS4200 series" + depends on LEDS_CLASS && PCI && DMI + help + This option enables support for the Intel SS4200 series of + Network Attached Storage servers. You may control the hard + drive or power LEDs on the front panel. Using this driver + can stop the front LED from blinking after startup. + comment "LED Triggers" config LEDS_TRIGGERS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 46d72704d606..12b7a20fcfe0 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o +obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c new file mode 100644 index 000000000000..0ec4ec3bc823 --- /dev/null +++ b/drivers/leds/leds-ss4200.c @@ -0,0 +1,552 @@ +/* + * SS4200-E Hardware API + * Copyright (c) 2009, Intel Corporation. + * Copyright IBM Corporation, 2009 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Author: Dave Hansen + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Rodney Girod , Dave Hansen "); +MODULE_DESCRIPTION("Intel NAS/Home Server ICH7 GPIO Driver"); +MODULE_LICENSE("GPL"); + +/* + * ICH7 LPC/GPIO PCI Config register offsets + */ +#define PMBASE 0x040 +#define GPIO_BASE 0x048 +#define GPIO_CTRL 0x04c +#define GPIO_EN 0x010 + +/* + * The ICH7 GPIO register block is 64 bytes in size. + */ +#define ICH7_GPIO_SIZE 64 + +/* + * Define register offsets within the ICH7 register block. + */ +#define GPIO_USE_SEL 0x000 +#define GP_IO_SEL 0x004 +#define GP_LVL 0x00c +#define GPO_BLINK 0x018 +#define GPI_INV 0x030 +#define GPIO_USE_SEL2 0x034 +#define GP_IO_SEL2 0x038 +#define GP_LVL2 0x03c + +/* + * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives. + */ +static struct pci_device_id ich7_lpc_pci_id[] = +{ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) }, + { } /* NULL entry */ +}; + +MODULE_DEVICE_TABLE(pci, ich7_lpc_pci_id); + +static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id) +{ + pr_info("detected '%s'\n", id->ident); + return 1; +} + +static unsigned int __initdata nodetect; +module_param_named(nodetect, nodetect, bool, 0); +MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection"); + +/* + * struct nas_led_whitelist - List of known good models + * + * Contains the known good models this driver is compatible with. + * When adding a new model try to be as strict as possible. This + * makes it possible to keep the false positives (the model is + * detected as working, but in reality it is not) as low as + * possible. + */ +static struct dmi_system_id __initdata nas_led_whitelist[] = { + { + .callback = ss4200_led_dmi_callback, + .ident = "Intel SS4200-E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel"), + DMI_MATCH(DMI_PRODUCT_NAME, "SS4200-E"), + DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00") + } + }, +}; + +/* + * Base I/O address assigned to the Power Management register block + */ +static u32 g_pm_io_base; + +/* + * Base I/O address assigned to the ICH7 GPIO register block + */ +static u32 nas_gpio_io_base; + +/* + * When we successfully register a region, we are returned a resource. + * We use these to identify which regions we need to release on our way + * back out. + */ +static struct resource *gp_gpio_resource; + +struct nasgpio_led { + char *name; + u32 gpio_bit; + struct led_classdev led_cdev; +}; + +/* + * gpio_bit(s) are the ICH7 GPIO bit assignments + */ +static struct nasgpio_led nasgpio_leds[] = { + { .name = "hdd1:blue:sata", .gpio_bit = 0 }, + { .name = "hdd1:amber:sata", .gpio_bit = 1 }, + { .name = "hdd2:blue:sata", .gpio_bit = 2 }, + { .name = "hdd2:amber:sata", .gpio_bit = 3 }, + { .name = "hdd3:blue:sata", .gpio_bit = 4 }, + { .name = "hdd3:amber:sata", .gpio_bit = 5 }, + { .name = "hdd4:blue:sata", .gpio_bit = 6 }, + { .name = "hdd4:amber:sata", .gpio_bit = 7 }, + { .name = "power:blue:power", .gpio_bit = 27}, + { .name = "power:amber:power", .gpio_bit = 28}, +}; + +#define NAS_RECOVERY 0x00000400 /* GPIO10 */ + +static struct nasgpio_led * +led_classdev_to_nasgpio_led(struct led_classdev *led_cdev) +{ + return container_of(led_cdev, struct nasgpio_led, led_cdev); +} + +static struct nasgpio_led *get_led_named(char *name) +{ + int i; + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) { + if (strcmp(nasgpio_leds[i].name, name)) + continue; + return &nasgpio_leds[i]; + } + return NULL; +} + +/* + * This protects access to the gpio ports. + */ +static DEFINE_SPINLOCK(nasgpio_gpio_lock); + +/* + * There are two gpio ports, one for blinking and the other + * for power. @port tells us if we're doing blinking or + * power control. + * + * Caller must hold nasgpio_gpio_lock + */ +static void __nasgpio_led_set_attr(struct led_classdev *led_cdev, + u32 port, u32 value) +{ + struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev); + u32 gpio_out; + + gpio_out = inl(nas_gpio_io_base + port); + if (value) + gpio_out |= (1<gpio_bit); + else + gpio_out &= ~(1<gpio_bit); + + outl(gpio_out, nas_gpio_io_base + port); +} + +static void nasgpio_led_set_attr(struct led_classdev *led_cdev, + u32 port, u32 value) +{ + spin_lock(&nasgpio_gpio_lock); + __nasgpio_led_set_attr(led_cdev, port, value); + spin_unlock(&nasgpio_gpio_lock); +} + +u32 nasgpio_led_get_attr(struct led_classdev *led_cdev, u32 port) +{ + struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev); + u32 gpio_in; + + spin_lock(&nasgpio_gpio_lock); + gpio_in = inl(nas_gpio_io_base + port); + spin_unlock(&nasgpio_gpio_lock); + if (gpio_in & (1<gpio_bit)) + return 1; + return 0; +} + +/* + * There is actual brightness control in the hardware, + * but it is via smbus commands and not implemented + * in this driver. + */ +static void nasgpio_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + u32 setting = 0; + if (brightness >= LED_HALF) + setting = 1; + /* + * Hold the lock across both operations. This ensures + * consistency so that both the "turn off blinking" + * and "turn light off" operations complete as a set. + */ + spin_lock(&nasgpio_gpio_lock); + /* + * LED class documentation asks that past blink state + * be disabled when brightness is turned to zero. + */ + if (brightness == 0) + __nasgpio_led_set_attr(led_cdev, GPO_BLINK, 0); + __nasgpio_led_set_attr(led_cdev, GP_LVL, setting); + spin_unlock(&nasgpio_gpio_lock); +} + +static int nasgpio_led_set_blink(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + u32 setting = 1; + if (!(*delay_on == 0 && *delay_off == 0) && + !(*delay_on == 500 && *delay_off == 500)) + return -EINVAL; + /* + * These are very approximate. + */ + *delay_on = 500; + *delay_off = 500; + + nasgpio_led_set_attr(led_cdev, GPO_BLINK, setting); + + return 0; +} + + +/* + * Initialize the ICH7 GPIO registers for NAS usage. The BIOS should have + * already taken care of this, but we will do so in a non destructive manner + * so that we have what we need whether the BIOS did it or not. + */ +static int __devinit ich7_gpio_init(struct device *dev) +{ + int i; + u32 config_data = 0; + u32 all_nas_led = 0; + + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) + all_nas_led |= (1<dev, + "ERROR: The LPC GPIO Block has not been enabled.\n"); + goto out; + } + + status = pci_read_config_dword(dev, GPIO_BASE, &nas_gpio_io_base); + if (0 > status) { + dev_info(&dev->dev, "Unable to read GPIOBASE.\n"); + goto out; + } + dev_dbg(&dev->dev, ": GPIOBASE = 0x%08x\n", nas_gpio_io_base); + nas_gpio_io_base &= 0x00000ffc0; + + /* + * Insure that we have exclusive access to the GPIO I/O address range. + */ + gp_gpio_resource = request_region(nas_gpio_io_base, ICH7_GPIO_SIZE, + KBUILD_MODNAME); + if (NULL == gp_gpio_resource) { + dev_info(&dev->dev, + "ERROR Unable to register GPIO I/O addresses.\n"); + status = -1; + goto out; + } + + /* + * Initialize the GPIO for NAS/Home Server Use + */ + ich7_gpio_init(&dev->dev); + +out: + if (status) { + ich7_lpc_cleanup(&dev->dev); + pci_disable_device(dev); + } + return status; +} + +static void ich7_lpc_remove(struct pci_dev *dev) +{ + ich7_lpc_cleanup(&dev->dev); + pci_disable_device(dev); +} + +/* + * pci_driver structure passed to the PCI modules + */ +static struct pci_driver nas_gpio_pci_driver = { + .name = KBUILD_MODNAME, + .id_table = ich7_lpc_pci_id, + .probe = ich7_lpc_probe, + .remove = ich7_lpc_remove, +}; + +static struct led_classdev *get_classdev_for_led_nr(int nr) +{ + struct nasgpio_led *nas_led = &nasgpio_leds[nr]; + struct led_classdev *led = &nas_led->led_cdev; + return led; +} + + +static void set_power_light_amber_noblink(void) +{ + struct nasgpio_led *amber = get_led_named("power:amber:power"); + struct nasgpio_led *blue = get_led_named("power:blue:power"); + + if (!amber || !blue) + return; + /* + * LED_OFF implies disabling future blinking + */ + pr_debug("setting blue off and amber on\n"); + + nasgpio_led_set_brightness(&blue->led_cdev, LED_OFF); + nasgpio_led_set_brightness(&amber->led_cdev, LED_FULL); +} + +static ssize_t nas_led_blink_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led = dev_get_drvdata(dev); + int blinking = 0; + if (nasgpio_led_get_attr(led, GPO_BLINK)) + blinking = 1; + return sprintf(buf, "%u\n", blinking); +} + +static ssize_t nas_led_blink_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + int ret; + struct led_classdev *led = dev_get_drvdata(dev); + unsigned long blink_state; + + ret = strict_strtoul(buf, 10, &blink_state); + if (ret) + return ret; + + nasgpio_led_set_attr(led, GPO_BLINK, blink_state); + + return size; +} + +static DEVICE_ATTR(blink, 0644, nas_led_blink_show, nas_led_blink_store); + +static int register_nasgpio_led(int led_nr) +{ + int ret; + struct nasgpio_led *nas_led = &nasgpio_leds[led_nr]; + struct led_classdev *led = get_classdev_for_led_nr(led_nr); + + led->name = nas_led->name; + led->brightness = LED_OFF; + if (nasgpio_led_get_attr(led, GP_LVL)) + led->brightness = LED_FULL; + led->brightness_set = nasgpio_led_set_brightness; + led->blink_set = nasgpio_led_set_blink; + ret = led_classdev_register(&nas_gpio_pci_dev->dev, led); + if (ret) + return ret; + ret = device_create_file(led->dev, &dev_attr_blink); + if (ret) + led_classdev_unregister(led); + return ret; +} + +static void unregister_nasgpio_led(int led_nr) +{ + struct led_classdev *led = get_classdev_for_led_nr(led_nr); + led_classdev_unregister(led); + device_remove_file(led->dev, &dev_attr_blink); +} +/* + * module load/initialization + */ +static int __init nas_gpio_init(void) +{ + int i; + int ret = 0; + int nr_devices = 0; + + nr_devices = dmi_check_system(nas_led_whitelist); + if (nodetect) { + pr_info("skipping hardware autodetection\n"); + pr_info("Please send 'dmidecode' output to dave@sr71.net\n"); + nr_devices++; + } + + if (nr_devices <= 0) { + pr_info("no LED devices found\n"); + return -ENODEV; + } + + pr_info("registering PCI driver\n"); + ret = pci_register_driver(&nas_gpio_pci_driver); + if (ret) + return ret; + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) { + ret = register_nasgpio_led(i); + if (ret) + goto out_err; + } + /* + * When the system powers on, the BIOS leaves the power + * light blue and blinking. This will turn it solid + * amber once the driver is loaded. + */ + set_power_light_amber_noblink(); + return 0; +out_err: + for (; i >= 0; i--) + unregister_nasgpio_led(i); + pci_unregister_driver(&nas_gpio_pci_driver); + return ret; +} + +/* + * module unload + */ +static void __exit nas_gpio_exit(void) +{ + int i; + pr_info("Unregistering driver\n"); + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) + unregister_nasgpio_led(i); + pci_unregister_driver(&nas_gpio_pci_driver); +} + +module_init(nas_gpio_init); +module_exit(nas_gpio_exit); -- GitLab From 7f131cf3ed96c969d7b092bf629e25c3df50901e Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 5 Oct 2009 20:22:27 +0800 Subject: [PATCH 138/618] leds: leds-alix2c - take port address from MSR This makes the LEDs driver for ALIX2.C boards work with Coreboot by looking up the port address in the MSR rather than hard-coding it. The BIOS scan also needed some tweaks as the string in Coreboot differs from the one in the legacy BIOS. Successfully tested with both the legacy tinyBIOS as well as Coreboot v3. Signed-off-by: Daniel Mack Signed-off-by: Richard Purdie --- drivers/leds/leds-alix2.c | 115 ++++++++++++++++++++++++++++---------- 1 file changed, 84 insertions(+), 31 deletions(-) diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c index 731d4eef3425..f59ffadf5125 100644 --- a/drivers/leds/leds-alix2.c +++ b/drivers/leds/leds-alix2.c @@ -11,11 +11,24 @@ #include #include #include +#include static int force = 0; module_param(force, bool, 0444); MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs"); +#define MSR_LBAR_GPIO 0x5140000C +#define CS5535_GPIO_SIZE 256 + +static u32 gpio_base; + +static struct pci_device_id divil_pci[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, + { } /* NULL entry */ +}; +MODULE_DEVICE_TABLE(pci, divil_pci); + struct alix_led { struct led_classdev cdev; unsigned short port; @@ -30,9 +43,9 @@ static void alix_led_set(struct led_classdev *led_cdev, container_of(led_cdev, struct alix_led, cdev); if (brightness) - outl(led_dev->on_value, led_dev->port); + outl(led_dev->on_value, gpio_base + led_dev->port); else - outl(led_dev->off_value, led_dev->port); + outl(led_dev->off_value, gpio_base + led_dev->port); } static struct alix_led alix_leds[] = { @@ -41,7 +54,7 @@ static struct alix_led alix_leds[] = { .name = "alix:1", .brightness_set = alix_led_set, }, - .port = 0x6100, + .port = 0x00, .on_value = 1 << 22, .off_value = 1 << 6, }, @@ -50,7 +63,7 @@ static struct alix_led alix_leds[] = { .name = "alix:2", .brightness_set = alix_led_set, }, - .port = 0x6180, + .port = 0x80, .on_value = 1 << 25, .off_value = 1 << 9, }, @@ -59,7 +72,7 @@ static struct alix_led alix_leds[] = { .name = "alix:3", .brightness_set = alix_led_set, }, - .port = 0x6180, + .port = 0x80, .on_value = 1 << 27, .off_value = 1 << 11, }, @@ -101,64 +114,104 @@ static struct platform_driver alix_led_driver = { }, }; -static int __init alix_present(void) +static int __init alix_present(unsigned long bios_phys, + const char *alix_sig, + size_t alix_sig_len) { - const unsigned long bios_phys = 0x000f0000; const size_t bios_len = 0x00010000; - const char alix_sig[] = "PC Engines ALIX."; - const size_t alix_sig_len = sizeof(alix_sig) - 1; - const char *bios_virt; const char *scan_end; const char *p; - int ret = 0; + char name[64]; if (force) { printk(KERN_NOTICE "%s: forced to skip BIOS test, " "assume system has ALIX.2 style LEDs\n", KBUILD_MODNAME); - ret = 1; - goto out; + return 1; } bios_virt = phys_to_virt(bios_phys); scan_end = bios_virt + bios_len - (alix_sig_len + 2); for (p = bios_virt; p < scan_end; p++) { const char *tail; + char *a; - if (memcmp(p, alix_sig, alix_sig_len) != 0) { + if (memcmp(p, alix_sig, alix_sig_len) != 0) continue; - } + + memcpy(name, p, sizeof(name)); + + /* remove the first \0 character from string */ + a = strchr(name, '\0'); + if (a) + *a = ' '; + + /* cut the string at a newline */ + a = strchr(name, '\r'); + if (a) + *a = '\0'; tail = p + alix_sig_len; - if ((tail[0] == '2' || tail[0] == '3') && tail[1] == '\0') { + if ((tail[0] == '2' || tail[0] == '3')) { printk(KERN_INFO "%s: system is recognized as \"%s\"\n", - KBUILD_MODNAME, p); - ret = 1; - break; + KBUILD_MODNAME, name); + return 1; } } -out: - return ret; + return 0; } static struct platform_device *pdev; -static int __init alix_led_init(void) +static int __init alix_pci_led_init(void) { - int ret; + u32 low, hi; - if (!alix_present()) { - ret = -ENODEV; - goto out; + if (pci_dev_present(divil_pci) == 0) { + printk(KERN_WARNING KBUILD_MODNAME": DIVIL not found\n"); + return -ENODEV; } - /* enable output on GPIO for LED 1,2,3 */ - outl(1 << 6, 0x6104); - outl(1 << 9, 0x6184); - outl(1 << 11, 0x6184); + /* Grab the GPIO I/O range */ + rdmsr(MSR_LBAR_GPIO, low, hi); + + /* Check the mask and whether GPIO is enabled (sanity check) */ + if (hi != 0x0000f001) { + printk(KERN_WARNING KBUILD_MODNAME": GPIO not enabled\n"); + return -ENODEV; + } + + /* Mask off the IO base address */ + gpio_base = low & 0x0000ff00; + + if (!request_region(gpio_base, CS5535_GPIO_SIZE, KBUILD_MODNAME)) { + printk(KERN_ERR KBUILD_MODNAME": can't allocate I/O for GPIO\n"); + return -ENODEV; + } + + /* Set GPIO function to output */ + outl(1 << 6, gpio_base + 0x04); + outl(1 << 9, gpio_base + 0x84); + outl(1 << 11, gpio_base + 0x84); + + return 0; +} + +static int __init alix_led_init(void) +{ + int ret = -ENODEV; + const char tinybios_sig[] = "PC Engines ALIX."; + const char coreboot_sig[] = "PC Engines\0ALIX."; + + if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) || + alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1)) + ret = alix_pci_led_init(); + + if (ret < 0) + return ret; pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); if (!IS_ERR(pdev)) { @@ -168,7 +221,6 @@ static int __init alix_led_init(void) } else ret = PTR_ERR(pdev); -out: return ret; } @@ -176,6 +228,7 @@ static void __exit alix_led_exit(void) { platform_device_unregister(pdev); platform_driver_unregister(&alix_led_driver); + release_region(gpio_base, CS5535_GPIO_SIZE); } module_init(alix_led_init); -- GitLab From 09a46db05b2e07484c08c638d7d6bda0523a13a6 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Wed, 14 Oct 2009 09:20:47 -0700 Subject: [PATCH 139/618] leds-ss4200: Check pci_enable_device return pci_enable_result is defined using the __must_check macro but leds-ss4200 is not checking the return value. Signed-off-by: Javier Martinez Canillas Signed-off-by: Dave Hansen Signed-off-by: Richard Purdie --- drivers/leds/leds-ss4200.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c index 0ec4ec3bc823..c7f634727d67 100644 --- a/drivers/leds/leds-ss4200.c +++ b/drivers/leds/leds-ss4200.c @@ -344,10 +344,14 @@ static struct pci_dev *nas_gpio_pci_dev; static int __devinit ich7_lpc_probe(struct pci_dev *dev, const struct pci_device_id *id) { - int status = 0; + int status; u32 gc = 0; - pci_enable_device(dev); + status = pci_enable_device(dev); + if (status) { + dev_err(&dev->dev, "pci_enable_device failed\n"); + return; + } nas_gpio_pci_dev = dev; status = pci_read_config_dword(dev, PMBASE, &g_pm_io_base); -- GitLab From a8dd18feb68ef0c5d3ec02f7d198740ddd7e8fd3 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 15 Oct 2009 02:59:35 +0200 Subject: [PATCH 140/618] leds: Add driver for LT3593 controlled LEDs The LT3593 is a step-up DC/DC converter designed to drive up to ten white LEDs in series. The current flow can be set with a control pin. This driver controls any number of such devices connected on generic GPIOs and exports the function as as platform_driver. The gpio_led platform data struct definition is reused for this purpose. Successfully tested on a PXA embedded board. Signed-off-by: Daniel Mack Signed-off-by: Richard Purdie --- drivers/leds/Kconfig | 8 ++ drivers/leds/Makefile | 1 + drivers/leds/leds-lt3593.c | 217 +++++++++++++++++++++++++++++++++++++ 3 files changed, 226 insertions(+) create mode 100644 drivers/leds/leds-lt3593.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index e481d3c52a54..e2b7a5382ae6 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -245,6 +245,14 @@ config LEDS_INTEL_SS4200 drive or power LEDs on the front panel. Using this driver can stop the front LED from blinking after startup. +config LEDS_LT3593 + tristate "LED driver for LT3593 controllers" + depends on LEDS_CLASS && GENERIC_GPIO + help + This option enables support for LEDs driven by a Linear Technology + LT3593 controller. This controller uses a special one-wire pulse + coding protocol to set the brightness. + comment "LED Triggers" config LEDS_TRIGGERS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 12b7a20fcfe0..eb5a141d825c 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o +obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c new file mode 100644 index 000000000000..fee40a841959 --- /dev/null +++ b/drivers/leds/leds-lt3593.c @@ -0,0 +1,217 @@ +/* + * LEDs driver for LT3593 controllers + * + * See the datasheet at http://cds.linear.com/docs/Datasheet/3593f.pdf + * + * Copyright (c) 2009 Daniel Mack + * + * Based on leds-gpio.c, + * + * Copyright (C) 2007 8D Technologies inc. + * Raphael Assenat + * Copyright (C) 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +struct lt3593_led_data { + struct led_classdev cdev; + unsigned gpio; + struct work_struct work; + u8 new_level; +}; + +static void lt3593_led_work(struct work_struct *work) +{ + int pulses; + struct lt3593_led_data *led_dat = + container_of(work, struct lt3593_led_data, work); + + /* + * The LT3593 resets its internal current level register to the maximum + * level on the first falling edge on the control pin. Each following + * falling edge decreases the current level by 625uA. Up to 32 pulses + * can be sent, so the maximum power reduction is 20mA. + * After a timeout of 128us, the value is taken from the register and + * applied is to the output driver. + */ + + if (led_dat->new_level == 0) { + gpio_set_value_cansleep(led_dat->gpio, 0); + return; + } + + pulses = 32 - (led_dat->new_level * 32) / 255; + + if (pulses == 0) { + gpio_set_value_cansleep(led_dat->gpio, 0); + mdelay(1); + gpio_set_value_cansleep(led_dat->gpio, 1); + return; + } + + gpio_set_value_cansleep(led_dat->gpio, 1); + + while (pulses--) { + gpio_set_value_cansleep(led_dat->gpio, 0); + udelay(1); + gpio_set_value_cansleep(led_dat->gpio, 1); + udelay(1); + } +} + +static void lt3593_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct lt3593_led_data *led_dat = + container_of(led_cdev, struct lt3593_led_data, cdev); + + led_dat->new_level = value; + schedule_work(&led_dat->work); +} + +static int __devinit create_lt3593_led(const struct gpio_led *template, + struct lt3593_led_data *led_dat, struct device *parent) +{ + int ret, state; + + /* skip leds on GPIOs that aren't available */ + if (!gpio_is_valid(template->gpio)) { + printk(KERN_INFO "%s: skipping unavailable LT3593 LED at gpio %d (%s)\n", + KBUILD_MODNAME, template->gpio, template->name); + return 0; + } + + ret = gpio_request(template->gpio, template->name); + if (ret < 0) + return ret; + + led_dat->cdev.name = template->name; + led_dat->cdev.default_trigger = template->default_trigger; + led_dat->gpio = template->gpio; + + led_dat->cdev.brightness_set = lt3593_led_set; + + state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); + led_dat->cdev.brightness = state ? LED_FULL : LED_OFF; + + if (!template->retain_state_suspended) + led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + + ret = gpio_direction_output(led_dat->gpio, state); + if (ret < 0) + goto err; + + INIT_WORK(&led_dat->work, lt3593_led_work); + + ret = led_classdev_register(parent, &led_dat->cdev); + if (ret < 0) + goto err; + + printk(KERN_INFO "%s: registered LT3593 LED '%s' at GPIO %d\n", + KBUILD_MODNAME, template->name, template->gpio); + + return 0; + +err: + gpio_free(led_dat->gpio); + return ret; +} + +static void delete_lt3593_led(struct lt3593_led_data *led) +{ + if (!gpio_is_valid(led->gpio)) + return; + + led_classdev_unregister(&led->cdev); + cancel_work_sync(&led->work); + gpio_free(led->gpio); +} + +static int __devinit lt3593_led_probe(struct platform_device *pdev) +{ + struct gpio_led_platform_data *pdata = pdev->dev.platform_data; + struct lt3593_led_data *leds_data; + int i, ret = 0; + + if (!pdata) + return -EBUSY; + + leds_data = kzalloc(sizeof(struct lt3593_led_data) * pdata->num_leds, + GFP_KERNEL); + if (!leds_data) + return -ENOMEM; + + for (i = 0; i < pdata->num_leds; i++) { + ret = create_lt3593_led(&pdata->leds[i], &leds_data[i], + &pdev->dev); + if (ret < 0) + goto err; + } + + platform_set_drvdata(pdev, leds_data); + + return 0; + +err: + for (i = i - 1; i >= 0; i--) + delete_lt3593_led(&leds_data[i]); + + kfree(leds_data); + + return ret; +} + +static int __devexit lt3593_led_remove(struct platform_device *pdev) +{ + int i; + struct gpio_led_platform_data *pdata = pdev->dev.platform_data; + struct lt3593_led_data *leds_data; + + leds_data = platform_get_drvdata(pdev); + + for (i = 0; i < pdata->num_leds; i++) + delete_lt3593_led(&leds_data[i]); + + kfree(leds_data); + + return 0; +} + +static struct platform_driver lt3593_led_driver = { + .probe = lt3593_led_probe, + .remove = __devexit_p(lt3593_led_remove), + .driver = { + .name = "leds-lt3593", + .owner = THIS_MODULE, + }, +}; + +MODULE_ALIAS("platform:leds-lt3593"); + +static int __init lt3593_led_init(void) +{ + return platform_driver_register(<3593_led_driver); +} + +static void __exit lt3593_led_exit(void) +{ + platform_driver_unregister(<3593_led_driver); +} + +module_init(lt3593_led_init); +module_exit(lt3593_led_exit); + +MODULE_AUTHOR("Daniel Mack "); +MODULE_DESCRIPTION("LED driver for LT3593 controllers"); +MODULE_LICENSE("GPL"); -- GitLab From ed4a10b47ff1e4059157f33248a62d9551ced786 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 8 Oct 2009 04:00:19 -0400 Subject: [PATCH 141/618] leds: Add driver for ADP5520/ADP5501 MFD PMICs Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Richard Purdie --- drivers/leds/Kconfig | 10 ++ drivers/leds/Makefile | 1 + drivers/leds/leds-adp5520.c | 230 ++++++++++++++++++++++++++++++++++++ 3 files changed, 241 insertions(+) create mode 100644 drivers/leds/leds-adp5520.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index e2b7a5382ae6..f12a99676628 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -253,6 +253,16 @@ config LEDS_LT3593 LT3593 controller. This controller uses a special one-wire pulse coding protocol to set the brightness. +config LEDS_ADP5520 + tristate "LED Support for ADP5520/ADP5501 PMIC" + depends on LEDS_CLASS && PMIC_ADP5520 + help + This option enables support for on-chip LED drivers found + on Analog Devices ADP5520/ADP5501 PMICs. + + To compile this driver as a module, choose M here: the module will + be called leds-adp5520. + comment "LED Triggers" config LEDS_TRIGGERS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index eb5a141d825c..176f0c674751 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o +obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/leds-adp5520.c b/drivers/leds/leds-adp5520.c new file mode 100644 index 000000000000..a8f315902131 --- /dev/null +++ b/drivers/leds/leds-adp5520.c @@ -0,0 +1,230 @@ +/* + * LEDs driver for Analog Devices ADP5520/ADP5501 MFD PMICs + * + * Copyright 2009 Analog Devices Inc. + * + * Loosely derived from leds-da903x: + * Copyright (C) 2008 Compulab, Ltd. + * Mike Rapoport + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Eric Miao + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include + +struct adp5520_led { + struct led_classdev cdev; + struct work_struct work; + struct device *master; + enum led_brightness new_brightness; + int id; + int flags; +}; + +static void adp5520_led_work(struct work_struct *work) +{ + struct adp5520_led *led = container_of(work, struct adp5520_led, work); + adp5520_write(led->master, ADP5520_LED1_CURRENT + led->id - 1, + led->new_brightness >> 2); +} + +static void adp5520_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct adp5520_led *led; + + led = container_of(led_cdev, struct adp5520_led, cdev); + led->new_brightness = value; + schedule_work(&led->work); +} + +static int adp5520_led_setup(struct adp5520_led *led) +{ + struct device *dev = led->master; + int flags = led->flags; + int ret = 0; + + switch (led->id) { + case FLAG_ID_ADP5520_LED1_ADP5501_LED0: + ret |= adp5520_set_bits(dev, ADP5520_LED_TIME, + (flags >> ADP5520_FLAG_OFFT_SHIFT) & + ADP5520_FLAG_OFFT_MASK); + ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL, + ADP5520_LED1_EN); + break; + case FLAG_ID_ADP5520_LED2_ADP5501_LED1: + ret |= adp5520_set_bits(dev, ADP5520_LED_TIME, + ((flags >> ADP5520_FLAG_OFFT_SHIFT) & + ADP5520_FLAG_OFFT_MASK) << 2); + ret |= adp5520_clr_bits(dev, ADP5520_LED_CONTROL, + ADP5520_R3_MODE); + ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL, + ADP5520_LED2_EN); + break; + case FLAG_ID_ADP5520_LED3_ADP5501_LED2: + ret |= adp5520_set_bits(dev, ADP5520_LED_TIME, + ((flags >> ADP5520_FLAG_OFFT_SHIFT) & + ADP5520_FLAG_OFFT_MASK) << 4); + ret |= adp5520_clr_bits(dev, ADP5520_LED_CONTROL, + ADP5520_C3_MODE); + ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL, + ADP5520_LED3_EN); + break; + } + + return ret; +} + +static int __devinit adp5520_led_prepare(struct platform_device *pdev) +{ + struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data; + struct device *dev = pdev->dev.parent; + int ret = 0; + + ret |= adp5520_write(dev, ADP5520_LED1_CURRENT, 0); + ret |= adp5520_write(dev, ADP5520_LED2_CURRENT, 0); + ret |= adp5520_write(dev, ADP5520_LED3_CURRENT, 0); + ret |= adp5520_write(dev, ADP5520_LED_TIME, pdata->led_on_time << 6); + ret |= adp5520_write(dev, ADP5520_LED_FADE, FADE_VAL(pdata->fade_in, + pdata->fade_out)); + + return ret; +} + +static int __devinit adp5520_led_probe(struct platform_device *pdev) +{ + struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data; + struct adp5520_led *led, *led_dat; + struct led_info *cur_led; + int ret, i; + + if (pdata == NULL) { + dev_err(&pdev->dev, "missing platform data\n"); + return -ENODEV; + } + + if (pdata->num_leds > ADP5520_01_MAXLEDS) { + dev_err(&pdev->dev, "can't handle more than %d LEDS\n", + ADP5520_01_MAXLEDS); + return -EFAULT; + } + + led = kzalloc(sizeof(*led) * pdata->num_leds, GFP_KERNEL); + if (led == NULL) { + dev_err(&pdev->dev, "failed to alloc memory\n"); + return -ENOMEM; + } + + ret = adp5520_led_prepare(pdev); + + if (ret) { + dev_err(&pdev->dev, "failed to write\n"); + goto err_free; + } + + for (i = 0; i < pdata->num_leds; ++i) { + cur_led = &pdata->leds[i]; + led_dat = &led[i]; + + led_dat->cdev.name = cur_led->name; + led_dat->cdev.default_trigger = cur_led->default_trigger; + led_dat->cdev.brightness_set = adp5520_led_set; + led_dat->cdev.brightness = LED_OFF; + + if (cur_led->flags & ADP5520_FLAG_LED_MASK) + led_dat->flags = cur_led->flags; + else + led_dat->flags = i + 1; + + led_dat->id = led_dat->flags & ADP5520_FLAG_LED_MASK; + + led_dat->master = pdev->dev.parent; + led_dat->new_brightness = LED_OFF; + + INIT_WORK(&led_dat->work, adp5520_led_work); + + ret = led_classdev_register(led_dat->master, &led_dat->cdev); + if (ret) { + dev_err(&pdev->dev, "failed to register LED %d\n", + led_dat->id); + goto err; + } + + ret = adp5520_led_setup(led_dat); + if (ret) { + dev_err(&pdev->dev, "failed to write\n"); + i++; + goto err; + } + } + + platform_set_drvdata(pdev, led); + return 0; + +err: + if (i > 0) { + for (i = i - 1; i >= 0; i--) { + led_classdev_unregister(&led[i].cdev); + cancel_work_sync(&led[i].work); + } + } + +err_free: + kfree(led); + return ret; +} + +static int __devexit adp5520_led_remove(struct platform_device *pdev) +{ + struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data; + struct adp5520_led *led; + int i; + + led = platform_get_drvdata(pdev); + + adp5520_clr_bits(led->master, ADP5520_LED_CONTROL, + ADP5520_LED1_EN | ADP5520_LED2_EN | ADP5520_LED3_EN); + + for (i = 0; i < pdata->num_leds; i++) { + led_classdev_unregister(&led[i].cdev); + cancel_work_sync(&led[i].work); + } + + kfree(led); + return 0; +} + +static struct platform_driver adp5520_led_driver = { + .driver = { + .name = "adp5520-led", + .owner = THIS_MODULE, + }, + .probe = adp5520_led_probe, + .remove = __devexit_p(adp5520_led_remove), +}; + +static int __init adp5520_led_init(void) +{ + return platform_driver_register(&adp5520_led_driver); +} +module_init(adp5520_led_init); + +static void __exit adp5520_led_exit(void) +{ + platform_driver_unregister(&adp5520_led_driver); +} +module_exit(adp5520_led_exit); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("LEDS ADP5520(01) Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:adp5520-led"); -- GitLab From 6baddba4a40b4f4e37db051e84ac5e7cc454a19c Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sun, 20 Sep 2009 14:44:48 -0300 Subject: [PATCH 142/618] backlight/thinkpad-acpi: issue backlight class events Take advantage of the new events capabilities of the backlight class to notify userspace of backlight changes. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Richard Purdie --- Documentation/laptops/thinkpad-acpi.txt | 51 ++++++------------------- drivers/platform/x86/thinkpad_acpi.c | 24 +++++++++++- 2 files changed, 35 insertions(+), 40 deletions(-) diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index aafcaa634191..f5056c7fb5be 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -460,6 +460,8 @@ event code Key Notes For Lenovo ThinkPads with a new BIOS, it has to be handled either by the ACPI OSI, or by userspace. + The driver does the right thing, + never mess with this. 0x1011 0x10 FN+END Brightness down. See brightness up for details. @@ -582,46 +584,15 @@ with hotkey_report_mode. Brightness hotkey notes: -These are the current sane choices for brightness key mapping in -thinkpad-acpi: +Don't mess with the brightness hotkeys in a Thinkpad. If you want +notifications for OSD, use the sysfs backlight class event support. -For IBM and Lenovo models *without* ACPI backlight control (the ones on -which thinkpad-acpi will autoload its backlight interface by default, -and on which ACPI video does not export a backlight interface): - -1. Don't enable or map the brightness hotkeys in thinkpad-acpi, as - these older firmware versions unfortunately won't respect the hotkey - mask for brightness keys anyway, and always reacts to them. This - usually work fine, unless X.org drivers are doing something to block - the BIOS. In that case, use (3) below. This is the default mode of - operation. - -2. Enable the hotkeys, but map them to something else that is NOT - KEY_BRIGHTNESS_UP/DOWN or any other keycode that would cause - userspace to try to change the backlight level, and use that as an - on-screen-display hint. - -3. IF AND ONLY IF X.org drivers find a way to block the firmware from - automatically changing the brightness, enable the hotkeys and map - them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN, and feed that to - something that calls xbacklight. thinkpad-acpi will not be able to - change brightness in that case either, so you should disable its - backlight interface. - -For Lenovo models *with* ACPI backlight control: - -1. Load up ACPI video and use that. ACPI video will report ACPI - events for brightness change keys. Do not mess with thinkpad-acpi - defaults in this case. thinkpad-acpi should not have anything to do - with backlight events in a scenario where ACPI video is loaded: - brightness hotkeys must be disabled, and the backlight interface is - to be kept disabled as well. This is the default mode of operation. - -2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi, - and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN. Process - these keys on userspace somehow (e.g. by calling xbacklight). - The driver will do this automatically if it detects that ACPI video - has been disabled. +The driver will issue KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN events +automatically for the cases were userspace has to do something to +implement brightness changes. When you override these events, you will +either fail to handle properly the ThinkPads that require explicit +action to change backlight brightness, or the ThinkPads that require +that no action be taken to work properly. Bluetooth @@ -1465,3 +1436,5 @@ Sysfs interface changelog: and it is always able to disable hot keys. Very old thinkpads are properly supported. hotkey_bios_mask is deprecated and marked for removal. + +0x020600: Marker for backlight change event support. diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index cf61d6a8ef6f..758dc0b3ed91 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -22,7 +22,7 @@ */ #define TPACPI_VERSION "0.23" -#define TPACPI_SYSFS_VERSION 0x020500 +#define TPACPI_SYSFS_VERSION 0x020600 /* * Changelog: @@ -6092,6 +6092,12 @@ static int brightness_get(struct backlight_device *bd) return status & TP_EC_BACKLIGHT_LVLMSK; } +static void tpacpi_brightness_notify_change(void) +{ + backlight_force_update(ibm_backlight_device, + BACKLIGHT_UPDATE_HOTKEY); +} + static struct backlight_ops ibm_backlight_data = { .get_brightness = brightness_get, .update_status = brightness_update_status, @@ -6246,6 +6252,12 @@ static int __init brightness_init(struct ibm_init_struct *iibm) ibm_backlight_device->props.brightness = b & TP_EC_BACKLIGHT_LVLMSK; backlight_update_status(ibm_backlight_device); + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT, + "brightness: registering brightness hotkeys " + "as change notification\n"); + tpacpi_hotkey_driver_mask_set(hotkey_driver_mask + | TP_ACPI_HKEY_BRGHTUP_MASK + | TP_ACPI_HKEY_BRGHTDWN_MASK);; return 0; } @@ -6322,6 +6334,9 @@ static int brightness_write(char *buf) * Doing it this way makes the syscall restartable in case of EINTR */ rc = brightness_set(level); + if (!rc && ibm_backlight_device) + backlight_force_update(ibm_backlight_device, + BACKLIGHT_UPDATE_SYSFS); return (rc == -EINTR)? -ERESTARTSYS : rc; } @@ -7721,6 +7736,13 @@ static struct ibm_struct fan_driver_data = { */ static void tpacpi_driver_event(const unsigned int hkey_event) { + if (ibm_backlight_device) { + switch (hkey_event) { + case TP_HKEY_EV_BRGHT_UP: + case TP_HKEY_EV_BRGHT_DOWN: + tpacpi_brightness_notify_change(); + } + } } -- GitLab From 9905a43b2d563e6f89e4c63c4278ada03f2ebb14 Mon Sep 17 00:00:00 2001 From: Emese Revfy Date: Mon, 14 Dec 2009 00:58:57 +0100 Subject: [PATCH 143/618] backlight: Constify struct backlight_ops Signed-off-by: Emese Revfy Signed-off-by: Richard Purdie --- drivers/video/backlight/adp5520_bl.c | 2 +- drivers/video/backlight/adx_bl.c | 2 +- drivers/video/backlight/atmel-pwm-bl.c | 2 +- drivers/video/backlight/backlight.c | 2 +- drivers/video/backlight/corgi_lcd.c | 2 +- drivers/video/backlight/cr_bllcd.c | 2 +- drivers/video/backlight/da903x_bl.c | 2 +- drivers/video/backlight/generic_bl.c | 2 +- drivers/video/backlight/hp680_bl.c | 2 +- drivers/video/backlight/jornada720_bl.c | 2 +- drivers/video/backlight/kb3886_bl.c | 2 +- drivers/video/backlight/locomolcd.c | 2 +- drivers/video/backlight/mbp_nvidia_bl.c | 2 +- drivers/video/backlight/omap1_bl.c | 2 +- drivers/video/backlight/progear_bl.c | 2 +- drivers/video/backlight/pwm_bl.c | 2 +- drivers/video/backlight/tosa_bl.c | 2 +- drivers/video/backlight/wm831x_bl.c | 2 +- include/linux/backlight.h | 12 ++++++------ 19 files changed, 24 insertions(+), 24 deletions(-) diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c index 4c10edecfb66..86d95c228adb 100644 --- a/drivers/video/backlight/adp5520_bl.c +++ b/drivers/video/backlight/adp5520_bl.c @@ -85,7 +85,7 @@ static int adp5520_bl_get_brightness(struct backlight_device *bl) return error ? data->current_brightness : reg_val; } -static struct backlight_ops adp5520_bl_ops = { +static const struct backlight_ops adp5520_bl_ops = { .update_status = adp5520_bl_update_status, .get_brightness = adp5520_bl_get_brightness, }; diff --git a/drivers/video/backlight/adx_bl.c b/drivers/video/backlight/adx_bl.c index 2c3bdfc620b7..d769b0bab21a 100644 --- a/drivers/video/backlight/adx_bl.c +++ b/drivers/video/backlight/adx_bl.c @@ -61,7 +61,7 @@ static int adx_backlight_check_fb(struct fb_info *fb) return 1; } -static struct backlight_ops adx_backlight_ops = { +static const struct backlight_ops adx_backlight_ops = { .options = 0, .update_status = adx_backlight_update_status, .get_brightness = adx_backlight_get_brightness, diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c index 2cf7ba52f67c..f625ffc69ad3 100644 --- a/drivers/video/backlight/atmel-pwm-bl.c +++ b/drivers/video/backlight/atmel-pwm-bl.c @@ -113,7 +113,7 @@ static int atmel_pwm_bl_init_pwm(struct atmel_pwm_bl *pwmbl) return pwm_channel_enable(&pwmbl->pwmc); } -static struct backlight_ops atmel_pwm_bl_ops = { +static const struct backlight_ops atmel_pwm_bl_ops = { .get_brightness = atmel_pwm_bl_get_intensity, .update_status = atmel_pwm_bl_set_intensity, }; diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index 6615ac7fa60a..18829cf68b1b 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -269,7 +269,7 @@ EXPORT_SYMBOL(backlight_force_update); * ERR_PTR() or a pointer to the newly allocated device. */ struct backlight_device *backlight_device_register(const char *name, - struct device *parent, void *devdata, struct backlight_ops *ops) + struct device *parent, void *devdata, const struct backlight_ops *ops) { struct backlight_device *new_bd; int rc; diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c index 96774949cd30..b4bcf8043797 100644 --- a/drivers/video/backlight/corgi_lcd.c +++ b/drivers/video/backlight/corgi_lcd.c @@ -451,7 +451,7 @@ void corgi_lcd_limit_intensity(int limit) } EXPORT_SYMBOL(corgi_lcd_limit_intensity); -static struct backlight_ops corgi_bl_ops = { +static const struct backlight_ops corgi_bl_ops = { .get_brightness = corgi_bl_get_intensity, .update_status = corgi_bl_update_status, }; diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c index b9fe62b475c6..2914bf104adf 100644 --- a/drivers/video/backlight/cr_bllcd.c +++ b/drivers/video/backlight/cr_bllcd.c @@ -108,7 +108,7 @@ static int cr_backlight_get_intensity(struct backlight_device *bd) return intensity; } -static struct backlight_ops cr_backlight_ops = { +static const struct backlight_ops cr_backlight_ops = { .get_brightness = cr_backlight_get_intensity, .update_status = cr_backlight_set_intensity, }; diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c index f2d76dae1eb3..74cdc640173d 100644 --- a/drivers/video/backlight/da903x_bl.c +++ b/drivers/video/backlight/da903x_bl.c @@ -95,7 +95,7 @@ static int da903x_backlight_get_brightness(struct backlight_device *bl) return data->current_brightness; } -static struct backlight_ops da903x_backlight_ops = { +static const struct backlight_ops da903x_backlight_ops = { .update_status = da903x_backlight_update_status, .get_brightness = da903x_backlight_get_brightness, }; diff --git a/drivers/video/backlight/generic_bl.c b/drivers/video/backlight/generic_bl.c index 6d27f62fdcd0..e6d348e63596 100644 --- a/drivers/video/backlight/generic_bl.c +++ b/drivers/video/backlight/generic_bl.c @@ -70,7 +70,7 @@ void corgibl_limit_intensity(int limit) } EXPORT_SYMBOL(corgibl_limit_intensity); -static struct backlight_ops genericbl_ops = { +static const struct backlight_ops genericbl_ops = { .options = BL_CORE_SUSPENDRESUME, .get_brightness = genericbl_get_intensity, .update_status = genericbl_send_intensity, diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c index 7fb4eefff80d..f7cc528d5be7 100644 --- a/drivers/video/backlight/hp680_bl.c +++ b/drivers/video/backlight/hp680_bl.c @@ -98,7 +98,7 @@ static int hp680bl_get_intensity(struct backlight_device *bd) return current_intensity; } -static struct backlight_ops hp680bl_ops = { +static const struct backlight_ops hp680bl_ops = { .get_brightness = hp680bl_get_intensity, .update_status = hp680bl_set_intensity, }; diff --git a/drivers/video/backlight/jornada720_bl.c b/drivers/video/backlight/jornada720_bl.c index 7aed2565c1bd..db9071fc5665 100644 --- a/drivers/video/backlight/jornada720_bl.c +++ b/drivers/video/backlight/jornada720_bl.c @@ -93,7 +93,7 @@ static int jornada_bl_update_status(struct backlight_device *bd) return ret; } -static struct backlight_ops jornada_bl_ops = { +static const struct backlight_ops jornada_bl_ops = { .get_brightness = jornada_bl_get_brightness, .update_status = jornada_bl_update_status, .options = BL_CORE_SUSPENDRESUME, diff --git a/drivers/video/backlight/kb3886_bl.c b/drivers/video/backlight/kb3886_bl.c index a38fda1742dd..939e7b830cf3 100644 --- a/drivers/video/backlight/kb3886_bl.c +++ b/drivers/video/backlight/kb3886_bl.c @@ -134,7 +134,7 @@ static int kb3886bl_get_intensity(struct backlight_device *bd) return kb3886bl_intensity; } -static struct backlight_ops kb3886bl_ops = { +static const struct backlight_ops kb3886bl_ops = { .get_brightness = kb3886bl_get_intensity, .update_status = kb3886bl_send_intensity, }; diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index 6b488b8a7eee..00a9591b0003 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -141,7 +141,7 @@ static int locomolcd_get_intensity(struct backlight_device *bd) return current_intensity; } -static struct backlight_ops locomobl_data = { +static const struct backlight_ops locomobl_data = { .get_brightness = locomolcd_get_intensity, .update_status = locomolcd_set_intensity, }; diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c index 9edb8d7c295f..581246894733 100644 --- a/drivers/video/backlight/mbp_nvidia_bl.c +++ b/drivers/video/backlight/mbp_nvidia_bl.c @@ -33,7 +33,7 @@ struct dmi_match_data { unsigned long iostart; unsigned long iolen; /* Backlight operations structure. */ - struct backlight_ops backlight_ops; + const struct backlight_ops backlight_ops; }; /* Module parameters. */ diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c index 8693e5fcd2eb..409ca9643528 100644 --- a/drivers/video/backlight/omap1_bl.c +++ b/drivers/video/backlight/omap1_bl.c @@ -125,7 +125,7 @@ static int omapbl_get_intensity(struct backlight_device *dev) return bl->current_intensity; } -static struct backlight_ops omapbl_ops = { +static const struct backlight_ops omapbl_ops = { .get_brightness = omapbl_get_intensity, .update_status = omapbl_update_status, }; diff --git a/drivers/video/backlight/progear_bl.c b/drivers/video/backlight/progear_bl.c index 9edaf24fd82d..075786e05034 100644 --- a/drivers/video/backlight/progear_bl.c +++ b/drivers/video/backlight/progear_bl.c @@ -54,7 +54,7 @@ static int progearbl_get_intensity(struct backlight_device *bd) return intensity - HW_LEVEL_MIN; } -static struct backlight_ops progearbl_ops = { +static const struct backlight_ops progearbl_ops = { .get_brightness = progearbl_get_intensity, .update_status = progearbl_set_intensity, }; diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 887166267443..df9e0b32cf39 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -56,7 +56,7 @@ static int pwm_backlight_get_brightness(struct backlight_device *bl) return bl->props.brightness; } -static struct backlight_ops pwm_backlight_ops = { +static const struct backlight_ops pwm_backlight_ops = { .update_status = pwm_backlight_update_status, .get_brightness = pwm_backlight_get_brightness, }; diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c index 43edbada12d1..e14ce4d469f5 100644 --- a/drivers/video/backlight/tosa_bl.c +++ b/drivers/video/backlight/tosa_bl.c @@ -72,7 +72,7 @@ static int tosa_bl_get_brightness(struct backlight_device *dev) return props->brightness; } -static struct backlight_ops bl_ops = { +static const struct backlight_ops bl_ops = { .get_brightness = tosa_bl_get_brightness, .update_status = tosa_bl_update_status, }; diff --git a/drivers/video/backlight/wm831x_bl.c b/drivers/video/backlight/wm831x_bl.c index 467bdb7efb23..e32add37a203 100644 --- a/drivers/video/backlight/wm831x_bl.c +++ b/drivers/video/backlight/wm831x_bl.c @@ -112,7 +112,7 @@ static int wm831x_backlight_get_brightness(struct backlight_device *bl) return data->current_brightness; } -static struct backlight_ops wm831x_backlight_ops = { +static const struct backlight_ops wm831x_backlight_ops = { .options = BL_CORE_SUSPENDRESUME, .update_status = wm831x_backlight_update_status, .get_brightness = wm831x_backlight_get_brightness, diff --git a/include/linux/backlight.h b/include/linux/backlight.h index 0f5f57858a23..8c4f884db6b4 100644 --- a/include/linux/backlight.h +++ b/include/linux/backlight.h @@ -36,18 +36,18 @@ struct backlight_device; struct fb_info; struct backlight_ops { - unsigned int options; + const unsigned int options; #define BL_CORE_SUSPENDRESUME (1 << 0) /* Notify the backlight driver some property has changed */ - int (*update_status)(struct backlight_device *); + int (* const update_status)(struct backlight_device *); /* Return the current backlight brightness (accounting for power, fb_blank etc.) */ - int (*get_brightness)(struct backlight_device *); + int (* const get_brightness)(struct backlight_device *); /* Check if given framebuffer device is the one bound to this backlight; return 0 if not, !=0 if it is. If NULL, backlight always matches the fb. */ - int (*check_fb)(struct fb_info *); + int (* const check_fb)(struct fb_info *); }; /* This structure defines all the properties of a backlight */ @@ -86,7 +86,7 @@ struct backlight_device { registered this device has been unloaded, and if class_get_devdata() points to something in the body of that driver, it is also invalid. */ struct mutex ops_lock; - struct backlight_ops *ops; + const struct backlight_ops *ops; /* The framebuffer notifier block */ struct notifier_block fb_notif; @@ -103,7 +103,7 @@ static inline void backlight_update_status(struct backlight_device *bd) } extern struct backlight_device *backlight_device_register(const char *name, - struct device *dev, void *devdata, struct backlight_ops *ops); + struct device *dev, void *devdata, const struct backlight_ops *ops); extern void backlight_device_unregister(struct backlight_device *bd); extern void backlight_force_update(struct backlight_device *bd, enum backlight_update_reason reason); -- GitLab From 75e874c698bf7aeed005acd74d0fb13c47124939 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 16 Dec 2009 21:35:52 +0800 Subject: [PATCH 144/618] [ARM] pxa: fix no reference of cpu_is_pxa25x() in devices.c Signed-off-by: Eric Miao --- arch/arm/mach-pxa/devices.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index d4cc41d04b25..8e10db148f1b 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include -- GitLab From 75b46c1321785c29cfbc4f839b6dc031428734ad Mon Sep 17 00:00:00 2001 From: Jon Smirl Date: Tue, 15 Dec 2009 20:53:44 -0500 Subject: [PATCH 145/618] ASoC: Fix disable of SPDIF on STAC9766 codec Change code so that switching to playing music through the analog output disables SPDIF out instead of disabling it when stream ends. Signed-off-by: Jon Smirl Acked-by: Mark Brown --- sound/soc/codecs/stac9766.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-) diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c index bbc72c2ddfca..81b8c9dfe7fc 100644 --- a/sound/soc/codecs/stac9766.c +++ b/sound/soc/codecs/stac9766.c @@ -191,6 +191,7 @@ static int ac97_analog_prepare(struct snd_pcm_substream *substream, vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS); vra |= 0x1; /* enable variable rate audio */ + vra &= ~0x4; /* disable SPDIF output */ stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra); @@ -221,22 +222,6 @@ static int ac97_digital_prepare(struct snd_pcm_substream *substream, return stac9766_ac97_write(codec, reg, runtime->rate); } -static int ac97_digital_trigger(struct snd_pcm_substream *substream, - int cmd, struct snd_soc_dai *dai) -{ - struct snd_soc_codec *codec = dai->codec; - unsigned short vra; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_STOP: - vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS); - vra &= !0x04; - stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra); - break; - } - return 0; -} - static int stac9766_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { @@ -315,7 +300,6 @@ static struct snd_soc_dai_ops stac9766_dai_ops_analog = { static struct snd_soc_dai_ops stac9766_dai_ops_digital = { .prepare = ac97_digital_prepare, - .trigger = ac97_digital_trigger, }; struct snd_soc_dai stac9766_dai[] = { -- GitLab From 933b0618d8b2a59c7a0742e43836544e02f1e9bd Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Dec 2009 18:04:31 +0100 Subject: [PATCH 146/618] sched: Mark boot-cpu active before smp_init() A UP machine has 1 active cpu, not having the boot-cpu in the active map when starting the scheduler confuses things. Signed-off-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091216170517.423469527@chello.nl> Signed-off-by: Ingo Molnar --- init/main.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/init/main.c b/init/main.c index c3db4a98b369..dac44a9356a5 100644 --- a/init/main.c +++ b/init/main.c @@ -369,12 +369,6 @@ static void __init smp_init(void) { unsigned int cpu; - /* - * Set up the current CPU as possible to migrate to. - * The other ones will be done by cpu_up/cpu_down() - */ - set_cpu_active(smp_processor_id(), true); - /* FIXME: This should be done in userspace --RR */ for_each_present_cpu(cpu) { if (num_online_cpus() >= setup_max_cpus) @@ -486,6 +480,7 @@ static void __init boot_cpu_init(void) int cpu = smp_processor_id(); /* Mark the boot cpu "present", "online" etc for SMP and UP case */ set_cpu_online(cpu, true); + set_cpu_active(cpu, true); set_cpu_present(cpu, true); set_cpu_possible(cpu, true); } -- GitLab From 9ee349ad6d326df3633d43f54202427295999c47 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Wed, 16 Dec 2009 18:04:32 +0100 Subject: [PATCH 147/618] sched: Fix set_cpu_active() in cpu_down() Sachin found cpu hotplug test failures on powerpc, which made the kernel hang on his POWER box. The problem is that we fail to re-activate a cpu when a hot-unplug fails. Fix this by moving the de-activation into _cpu_down after doing the initial checks. Remove the synchronize_sched() calls and rely on those implied by rebuilding the sched domains using the new mask. Reported-by: Sachin Sant Signed-off-by: Xiaotian Feng Tested-by: Sachin Sant Signed-off-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091216170517.500272612@chello.nl> Signed-off-by: Ingo Molnar --- kernel/cpu.c | 24 +++--------------------- 1 file changed, 3 insertions(+), 21 deletions(-) diff --git a/kernel/cpu.c b/kernel/cpu.c index 291ac586f37f..1c8ddd6ee940 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -209,6 +209,7 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen) return -ENOMEM; cpu_hotplug_begin(); + set_cpu_active(cpu, false); err = __raw_notifier_call_chain(&cpu_chain, CPU_DOWN_PREPARE | mod, hcpu, -1, &nr_calls); if (err == NOTIFY_BAD) { @@ -280,18 +281,6 @@ int __ref cpu_down(unsigned int cpu) goto out; } - set_cpu_active(cpu, false); - - /* - * Make sure the all cpus did the reschedule and are not - * using stale version of the cpu_active_mask. - * This is not strictly necessary becuase stop_machine() - * that we run down the line already provides the required - * synchronization. But it's really a side effect and we do not - * want to depend on the innards of the stop_machine here. - */ - synchronize_sched(); - err = _cpu_down(cpu, 0); out: @@ -382,19 +371,12 @@ int disable_nonboot_cpus(void) return error; cpu_maps_update_begin(); first_cpu = cpumask_first(cpu_online_mask); - /* We take down all of the non-boot CPUs in one shot to avoid races + /* + * We take down all of the non-boot CPUs in one shot to avoid races * with the userspace trying to use the CPU hotplug at the same time */ cpumask_clear(frozen_cpus); - for_each_online_cpu(cpu) { - if (cpu == first_cpu) - continue; - set_cpu_active(cpu, false); - } - - synchronize_sched(); - printk("Disabling non-boot CPUs ...\n"); for_each_online_cpu(cpu) { if (cpu == first_cpu) -- GitLab From e6c8fba7771563b2f3dfb96a78f36ec17e15bdf0 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Dec 2009 18:04:33 +0100 Subject: [PATCH 148/618] sched: Fix task_hot() test order Make sure not to access sched_fair fields before verifying it is indeed a sched_fair task. Signed-off-by: Peter Zijlstra Cc: Mike Galbraith CC: stable@kernel.org LKML-Reference: <20091216170517.577998058@chello.nl> Signed-off-by: Ingo Molnar --- kernel/sched.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 9c30858b6463..1d8ca25dd6fb 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2046,6 +2046,9 @@ task_hot(struct task_struct *p, u64 now, struct sched_domain *sd) { s64 delta; + if (p->sched_class != &fair_sched_class) + return 0; + /* * Buddy candidates are cache hot: */ @@ -2054,9 +2057,6 @@ task_hot(struct task_struct *p, u64 now, struct sched_domain *sd) &p->se == cfs_rq_of(&p->se)->last)) return 1; - if (p->sched_class != &fair_sched_class) - return 0; - if (sysctl_sched_migration_cost == -1) return 1; if (sysctl_sched_migration_cost == 0) -- GitLab From e4f4288842ee12747e10c354d72be7d424c0b627 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Dec 2009 18:04:34 +0100 Subject: [PATCH 149/618] sched: Select_task_rq_fair() must honour SD_LOAD_BALANCE We should skip !SD_LOAD_BALANCE domains. Signed-off-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091216170517.653578430@chello.nl> CC: stable@kernel.org Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 5bedf6e3ebf3..ec1d2715620c 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1429,6 +1429,9 @@ static int select_task_rq_fair(struct task_struct *p, int sd_flag, int wake_flag } for_each_domain(cpu, tmp) { + if (!(tmp->flags & SD_LOAD_BALANCE)) + continue; + /* * If power savings logic is enabled for a domain, see if we * are not overloaded, if so, don't balance wider. -- GitLab From 06b83b5fbea273672822b6ee93e16781046553ec Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Dec 2009 18:04:35 +0100 Subject: [PATCH 150/618] sched: Use TASK_WAKING for fork wakups For later convenience use TASK_WAKING for fresh tasks. Signed-off-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091216170517.732561278@chello.nl> Signed-off-by: Ingo Molnar --- kernel/sched.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 1d8ca25dd6fb..1672823aabfe 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2540,14 +2540,6 @@ static void __sched_fork(struct task_struct *p) #ifdef CONFIG_PREEMPT_NOTIFIERS INIT_HLIST_HEAD(&p->preempt_notifiers); #endif - - /* - * We mark the process as running here, but have not actually - * inserted it onto the runqueue yet. This guarantees that - * nobody will actually run it, and a signal or other external - * event cannot wake it up and insert it on the runqueue either. - */ - p->state = TASK_RUNNING; } /* @@ -2558,6 +2550,12 @@ void sched_fork(struct task_struct *p, int clone_flags) int cpu = get_cpu(); __sched_fork(p); + /* + * We mark the process as waking here. This guarantees that + * nobody will actually run it, and a signal or other external + * event cannot wake it up and insert it on the runqueue either. + */ + p->state = TASK_WAKING; /* * Revert to default priority/policy on fork if requested. @@ -2626,7 +2624,8 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) struct rq *rq; rq = task_rq_lock(p, &flags); - BUG_ON(p->state != TASK_RUNNING); + BUG_ON(p->state != TASK_WAKING); + p->state = TASK_RUNNING; update_rq_clock(rq); activate_task(rq, p, 0); trace_sched_wakeup_new(rq, p, 1); @@ -6984,6 +6983,7 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu) raw_spin_lock_irqsave(&rq->lock, flags); __sched_fork(idle); + idle->state = TASK_RUNNING; idle->se.exec_start = sched_clock(); cpumask_copy(&idle->cpus_allowed, cpumask_of(cpu)); -- GitLab From e2912009fb7b715728311b0d8fe327a1432b3f79 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Dec 2009 18:04:36 +0100 Subject: [PATCH 151/618] sched: Ensure set_task_cpu() is never called on blocked tasks In order to clean up the set_task_cpu() rq dependencies we need to ensure it is never called on blocked tasks because such usage does not pair with consistent rq->lock usage. This puts the migration burden on ttwu(). Furthermore we need to close a race against changing ->cpus_allowed, since select_task_rq() runs with only preemption disabled. For sched_fork() this is safe because the child isn't in the tasklist yet, for wakeup we fix this by synchronizing set_cpus_allowed_ptr() against TASK_WAKING, which leaves sched_exec to be a problem This also closes a hole in (6ad4c1888 sched: Fix balance vs hotplug race) where ->select_task_rq() doesn't validate the result against the sched_domain/root_domain. Signed-off-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091216170517.807938893@chello.nl> Signed-off-by: Ingo Molnar --- kernel/sched.c | 85 +++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 66 insertions(+), 19 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 1672823aabfe..33d7965f63f0 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2018,22 +2018,15 @@ static inline void check_class_changed(struct rq *rq, struct task_struct *p, */ void kthread_bind(struct task_struct *p, unsigned int cpu) { - struct rq *rq = cpu_rq(cpu); - unsigned long flags; - /* Must have done schedule() in kthread() before we set_task_cpu */ if (!wait_task_inactive(p, TASK_UNINTERRUPTIBLE)) { WARN_ON(1); return; } - raw_spin_lock_irqsave(&rq->lock, flags); - update_rq_clock(rq); - set_task_cpu(p, cpu); p->cpus_allowed = cpumask_of_cpu(cpu); p->rt.nr_cpus_allowed = 1; p->flags |= PF_THREAD_BOUND; - raw_spin_unlock_irqrestore(&rq->lock, flags); } EXPORT_SYMBOL(kthread_bind); @@ -2074,6 +2067,14 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu) struct cfs_rq *old_cfsrq = task_cfs_rq(p), *new_cfsrq = cpu_cfs_rq(old_cfsrq, new_cpu); +#ifdef CONFIG_SCHED_DEBUG + /* + * We should never call set_task_cpu() on a blocked task, + * ttwu() will sort out the placement. + */ + WARN_ON(p->state != TASK_RUNNING && p->state != TASK_WAKING); +#endif + trace_sched_migrate_task(p, new_cpu); if (old_cpu != new_cpu) { @@ -2107,13 +2108,10 @@ migrate_task(struct task_struct *p, int dest_cpu, struct migration_req *req) /* * If the task is not on a runqueue (and not running), then - * it is sufficient to simply update the task's cpu field. + * the next wake-up will properly place the task. */ - if (!p->se.on_rq && !task_running(rq, p)) { - update_rq_clock(rq); - set_task_cpu(p, dest_cpu); + if (!p->se.on_rq && !task_running(rq, p)) return 0; - } init_completion(&req->done); req->task = p; @@ -2319,10 +2317,42 @@ void task_oncpu_function_call(struct task_struct *p, } #ifdef CONFIG_SMP +/* + * Called from: + * + * - fork, @p is stable because it isn't on the tasklist yet + * + * - exec, @p is unstable XXX + * + * - wake-up, we serialize ->cpus_allowed against TASK_WAKING so + * we should be good. + */ static inline int select_task_rq(struct task_struct *p, int sd_flags, int wake_flags) { - return p->sched_class->select_task_rq(p, sd_flags, wake_flags); + int cpu = p->sched_class->select_task_rq(p, sd_flags, wake_flags); + + /* + * In order not to call set_task_cpu() on a blocking task we need + * to rely on ttwu() to place the task on a valid ->cpus_allowed + * cpu. + * + * Since this is common to all placement strategies, this lives here. + * + * [ this allows ->select_task() to simply return task_cpu(p) and + * not worry about this generic constraint ] + */ + if (unlikely(!cpumask_test_cpu(cpu, &p->cpus_allowed) || + !cpu_active(cpu))) { + + cpu = cpumask_any_and(&p->cpus_allowed, cpu_active_mask); + /* + * XXX: race against hot-plug modifying cpu_active_mask + */ + BUG_ON(cpu >= nr_cpu_ids); + } + + return cpu; } #endif @@ -7098,7 +7128,23 @@ int set_cpus_allowed_ptr(struct task_struct *p, const struct cpumask *new_mask) struct rq *rq; int ret = 0; + /* + * Since we rely on wake-ups to migrate sleeping tasks, don't change + * the ->cpus_allowed mask from under waking tasks, which would be + * possible when we change rq->lock in ttwu(), so synchronize against + * TASK_WAKING to avoid that. + */ +again: + while (p->state == TASK_WAKING) + cpu_relax(); + rq = task_rq_lock(p, &flags); + + if (p->state == TASK_WAKING) { + task_rq_unlock(rq, &flags); + goto again; + } + if (!cpumask_intersects(new_mask, cpu_active_mask)) { ret = -EINVAL; goto out; @@ -7154,7 +7200,7 @@ EXPORT_SYMBOL_GPL(set_cpus_allowed_ptr); static int __migrate_task(struct task_struct *p, int src_cpu, int dest_cpu) { struct rq *rq_dest, *rq_src; - int ret = 0, on_rq; + int ret = 0; if (unlikely(!cpu_active(dest_cpu))) return ret; @@ -7170,12 +7216,13 @@ static int __migrate_task(struct task_struct *p, int src_cpu, int dest_cpu) if (!cpumask_test_cpu(dest_cpu, &p->cpus_allowed)) goto fail; - on_rq = p->se.on_rq; - if (on_rq) + /* + * If we're not on a rq, the next wake-up will ensure we're + * placed properly. + */ + if (p->se.on_rq) { deactivate_task(rq_src, p, 0); - - set_task_cpu(p, dest_cpu); - if (on_rq) { + set_task_cpu(p, dest_cpu); activate_task(rq_dest, p, 0); check_preempt_curr(rq_dest, p, 0); } -- GitLab From 3802290628348674985d14914f9bfee7b9084548 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Dec 2009 18:04:37 +0100 Subject: [PATCH 152/618] sched: Fix sched_exec() balancing Since we access ->cpus_allowed without holding rq->lock we need a retry loop to validate the result, this comes for near free when we merge sched_migrate_task() into sched_exec() since that already does the needed check. Signed-off-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091216170517.884743662@chello.nl> Signed-off-by: Ingo Molnar --- kernel/sched.c | 45 +++++++++++++++++++++++---------------------- 1 file changed, 23 insertions(+), 22 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 33d7965f63f0..63e55ac242d1 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2322,7 +2322,7 @@ void task_oncpu_function_call(struct task_struct *p, * * - fork, @p is stable because it isn't on the tasklist yet * - * - exec, @p is unstable XXX + * - exec, @p is unstable, retry loop * * - wake-up, we serialize ->cpus_allowed against TASK_WAKING so * we should be good. @@ -3132,21 +3132,36 @@ static void double_rq_unlock(struct rq *rq1, struct rq *rq2) } /* - * If dest_cpu is allowed for this process, migrate the task to it. - * This is accomplished by forcing the cpu_allowed mask to only - * allow dest_cpu, which will force the cpu onto dest_cpu. Then - * the cpu_allowed mask is restored. + * sched_exec - execve() is a valuable balancing opportunity, because at + * this point the task has the smallest effective memory and cache footprint. */ -static void sched_migrate_task(struct task_struct *p, int dest_cpu) +void sched_exec(void) { + struct task_struct *p = current; struct migration_req req; + int dest_cpu, this_cpu; unsigned long flags; struct rq *rq; +again: + this_cpu = get_cpu(); + dest_cpu = select_task_rq(p, SD_BALANCE_EXEC, 0); + if (dest_cpu == this_cpu) { + put_cpu(); + return; + } + rq = task_rq_lock(p, &flags); + put_cpu(); + + /* + * select_task_rq() can race against ->cpus_allowed + */ if (!cpumask_test_cpu(dest_cpu, &p->cpus_allowed) - || unlikely(!cpu_active(dest_cpu))) - goto out; + || unlikely(!cpu_active(dest_cpu))) { + task_rq_unlock(rq, &flags); + goto again; + } /* force the process onto the specified CPU */ if (migrate_task(p, dest_cpu, &req)) { @@ -3161,23 +3176,9 @@ static void sched_migrate_task(struct task_struct *p, int dest_cpu) return; } -out: task_rq_unlock(rq, &flags); } -/* - * sched_exec - execve() is a valuable balancing opportunity, because at - * this point the task has the smallest effective memory and cache footprint. - */ -void sched_exec(void) -{ - int new_cpu, this_cpu = get_cpu(); - new_cpu = select_task_rq(current, SD_BALANCE_EXEC, 0); - put_cpu(); - if (new_cpu != this_cpu) - sched_migrate_task(current, new_cpu); -} - /* * pull_task - move a task from a remote runqueue to the local runqueue. * Both runqueues must be locked. -- GitLab From 5da9a0fb673a0ea0a093862f95f6b89b3390c31e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Dec 2009 18:04:38 +0100 Subject: [PATCH 153/618] sched: Fix select_task_rq() vs hotplug issues Since select_task_rq() is now responsible for guaranteeing ->cpus_allowed and cpu_active_mask, we need to verify this. select_task_rq_rt() can blindly return smp_processor_id()/task_cpu() without checking the valid masks, select_task_rq_fair() can do the same in the rare case that all SD_flags are disabled. Signed-off-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091216170517.961475466@chello.nl> Signed-off-by: Ingo Molnar --- kernel/sched.c | 75 +++++++++++++++++++++++++++----------------------- 1 file changed, 40 insertions(+), 35 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 63e55ac242d1..cc40bdadee7a 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2317,6 +2317,43 @@ void task_oncpu_function_call(struct task_struct *p, } #ifdef CONFIG_SMP +static int select_fallback_rq(int cpu, struct task_struct *p) +{ + int dest_cpu; + const struct cpumask *nodemask = cpumask_of_node(cpu_to_node(cpu)); + + /* Look for allowed, online CPU in same node. */ + for_each_cpu_and(dest_cpu, nodemask, cpu_active_mask) + if (cpumask_test_cpu(dest_cpu, &p->cpus_allowed)) + return dest_cpu; + + /* Any allowed, online CPU? */ + dest_cpu = cpumask_any_and(&p->cpus_allowed, cpu_active_mask); + if (dest_cpu < nr_cpu_ids) + return dest_cpu; + + /* No more Mr. Nice Guy. */ + if (dest_cpu >= nr_cpu_ids) { + rcu_read_lock(); + cpuset_cpus_allowed_locked(p, &p->cpus_allowed); + rcu_read_unlock(); + dest_cpu = cpumask_any_and(cpu_active_mask, &p->cpus_allowed); + + /* + * Don't tell them about moving exiting tasks or + * kernel threads (both mm NULL), since they never + * leave kernel. + */ + if (p->mm && printk_ratelimit()) { + printk(KERN_INFO "process %d (%s) no " + "longer affine to cpu%d\n", + task_pid_nr(p), p->comm, cpu); + } + } + + return dest_cpu; +} + /* * Called from: * @@ -2343,14 +2380,8 @@ int select_task_rq(struct task_struct *p, int sd_flags, int wake_flags) * not worry about this generic constraint ] */ if (unlikely(!cpumask_test_cpu(cpu, &p->cpus_allowed) || - !cpu_active(cpu))) { - - cpu = cpumask_any_and(&p->cpus_allowed, cpu_active_mask); - /* - * XXX: race against hot-plug modifying cpu_active_mask - */ - BUG_ON(cpu >= nr_cpu_ids); - } + !cpu_active(cpu))) + cpu = select_fallback_rq(task_cpu(p), p); return cpu; } @@ -7319,36 +7350,10 @@ static int __migrate_task_irq(struct task_struct *p, int src_cpu, int dest_cpu) static void move_task_off_dead_cpu(int dead_cpu, struct task_struct *p) { int dest_cpu; - const struct cpumask *nodemask = cpumask_of_node(cpu_to_node(dead_cpu)); again: - /* Look for allowed, online CPU in same node. */ - for_each_cpu_and(dest_cpu, nodemask, cpu_active_mask) - if (cpumask_test_cpu(dest_cpu, &p->cpus_allowed)) - goto move; - - /* Any allowed, online CPU? */ - dest_cpu = cpumask_any_and(&p->cpus_allowed, cpu_active_mask); - if (dest_cpu < nr_cpu_ids) - goto move; - - /* No more Mr. Nice Guy. */ - if (dest_cpu >= nr_cpu_ids) { - cpuset_cpus_allowed_locked(p, &p->cpus_allowed); - dest_cpu = cpumask_any_and(cpu_active_mask, &p->cpus_allowed); - - /* - * Don't tell them about moving exiting tasks or - * kernel threads (both mm NULL), since they never - * leave kernel. - */ - if (p->mm && printk_ratelimit()) { - pr_info("process %d (%s) no longer affine to cpu%d\n", - task_pid_nr(p), p->comm, dead_cpu); - } - } + dest_cpu = select_fallback_rq(dead_cpu, p); -move: /* It can have affinity changed while we were choosing. */ if (unlikely(!__migrate_task_irq(p, dead_cpu, dest_cpu))) goto again; -- GitLab From 881232b70b195768a71cd74ff4b4e8ab9502997b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Dec 2009 18:04:39 +0100 Subject: [PATCH 154/618] sched: Move kthread_bind() back to kthread.c Since kthread_bind() lost its dependencies on sched.c, move it back where it came from. Signed-off-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091216170518.039524041@chello.nl> Signed-off-by: Ingo Molnar --- kernel/kthread.c | 23 +++++++++++++++++++++++ kernel/sched.c | 26 -------------------------- 2 files changed, 23 insertions(+), 26 deletions(-) diff --git a/kernel/kthread.c b/kernel/kthread.c index ab7ae57773e1..fbb6222fe7e0 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -149,6 +149,29 @@ struct task_struct *kthread_create(int (*threadfn)(void *data), } EXPORT_SYMBOL(kthread_create); +/** + * kthread_bind - bind a just-created kthread to a cpu. + * @p: thread created by kthread_create(). + * @cpu: cpu (might not be online, must be possible) for @k to run on. + * + * Description: This function is equivalent to set_cpus_allowed(), + * except that @cpu doesn't need to be online, and the thread must be + * stopped (i.e., just returned from kthread_create()). + */ +void kthread_bind(struct task_struct *p, unsigned int cpu) +{ + /* Must have done schedule() in kthread() before we set_task_cpu */ + if (!wait_task_inactive(p, TASK_UNINTERRUPTIBLE)) { + WARN_ON(1); + return; + } + + p->cpus_allowed = cpumask_of_cpu(cpu); + p->rt.nr_cpus_allowed = 1; + p->flags |= PF_THREAD_BOUND; +} +EXPORT_SYMBOL(kthread_bind); + /** * kthread_stop - stop a thread created by kthread_create(). * @k: thread created by kthread_create(). diff --git a/kernel/sched.c b/kernel/sched.c index cc40bdadee7a..297dc441ff96 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2004,32 +2004,6 @@ static inline void check_class_changed(struct rq *rq, struct task_struct *p, p->sched_class->prio_changed(rq, p, oldprio, running); } -/** - * kthread_bind - bind a just-created kthread to a cpu. - * @p: thread created by kthread_create(). - * @cpu: cpu (might not be online, must be possible) for @k to run on. - * - * Description: This function is equivalent to set_cpus_allowed(), - * except that @cpu doesn't need to be online, and the thread must be - * stopped (i.e., just returned from kthread_create()). - * - * Function lives here instead of kthread.c because it messes with - * scheduler internals which require locking. - */ -void kthread_bind(struct task_struct *p, unsigned int cpu) -{ - /* Must have done schedule() in kthread() before we set_task_cpu */ - if (!wait_task_inactive(p, TASK_UNINTERRUPTIBLE)) { - WARN_ON(1); - return; - } - - p->cpus_allowed = cpumask_of_cpu(cpu); - p->rt.nr_cpus_allowed = 1; - p->flags |= PF_THREAD_BOUND; -} -EXPORT_SYMBOL(kthread_bind); - #ifdef CONFIG_SMP /* * Is this task likely cache-hot: -- GitLab From efbbd05a595343a413964ad85a2ad359b7b7efbd Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Dec 2009 18:04:40 +0100 Subject: [PATCH 155/618] sched: Add pre and post wakeup hooks As will be apparent in the next patch, we need a pre wakeup hook for sched_fair task migration, hence rename the post wakeup hook and one pre wakeup. Signed-off-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091216170518.114746117@chello.nl> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 3 ++- kernel/sched.c | 12 ++++++++---- kernel/sched_rt.c | 4 ++-- 3 files changed, 12 insertions(+), 7 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 5c858f38e81a..2c9fa1ccebff 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1091,7 +1091,8 @@ struct sched_class { enum cpu_idle_type idle); void (*pre_schedule) (struct rq *this_rq, struct task_struct *task); void (*post_schedule) (struct rq *this_rq); - void (*task_wake_up) (struct rq *this_rq, struct task_struct *task); + void (*task_waking) (struct rq *this_rq, struct task_struct *task); + void (*task_woken) (struct rq *this_rq, struct task_struct *task); void (*set_cpus_allowed)(struct task_struct *p, const struct cpumask *newmask); diff --git a/kernel/sched.c b/kernel/sched.c index 297dc441ff96..6c571bdd5658 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2412,6 +2412,10 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, if (task_contributes_to_load(p)) rq->nr_uninterruptible--; p->state = TASK_WAKING; + + if (p->sched_class->task_waking) + p->sched_class->task_waking(rq, p); + __task_rq_unlock(rq); cpu = select_task_rq(p, SD_BALANCE_WAKE, wake_flags); @@ -2475,8 +2479,8 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, p->state = TASK_RUNNING; #ifdef CONFIG_SMP - if (p->sched_class->task_wake_up) - p->sched_class->task_wake_up(rq, p); + if (p->sched_class->task_woken) + p->sched_class->task_woken(rq, p); if (unlikely(rq->idle_stamp)) { u64 delta = rq->clock - rq->idle_stamp; @@ -2666,8 +2670,8 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) trace_sched_wakeup_new(rq, p, 1); check_preempt_curr(rq, p, WF_FORK); #ifdef CONFIG_SMP - if (p->sched_class->task_wake_up) - p->sched_class->task_wake_up(rq, p); + if (p->sched_class->task_woken) + p->sched_class->task_woken(rq, p); #endif task_rq_unlock(rq, &flags); } diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index d2ea2828164e..f48328ac216f 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -1472,7 +1472,7 @@ static void post_schedule_rt(struct rq *rq) * If we are not running and we are not going to reschedule soon, we should * try to push tasks away now */ -static void task_wake_up_rt(struct rq *rq, struct task_struct *p) +static void task_woken_rt(struct rq *rq, struct task_struct *p) { if (!task_running(rq, p) && !test_tsk_need_resched(rq->curr) && @@ -1753,7 +1753,7 @@ static const struct sched_class rt_sched_class = { .rq_offline = rq_offline_rt, .pre_schedule = pre_schedule_rt, .post_schedule = post_schedule_rt, - .task_wake_up = task_wake_up_rt, + .task_woken = task_woken_rt, .switched_from = switched_from_rt, #endif -- GitLab From 88ec22d3edb72b261f8628226cd543589a6d5e1b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Dec 2009 18:04:41 +0100 Subject: [PATCH 156/618] sched: Remove the cfs_rq dependency from set_task_cpu() In order to remove the cfs_rq dependency from set_task_cpu() we need to ensure the task is cfs_rq invariant for all callsites. The simple approach is to substract cfs_rq->min_vruntime from se->vruntime on dequeue, and add cfs_rq->min_vruntime on enqueue. However, this has the downside of breaking FAIR_SLEEPERS since we loose the old vruntime as we only maintain the relative position. To solve this, we observe that we only migrate runnable tasks, we do this using deactivate_task(.sleep=0) and activate_task(.wakeup=0), therefore we can restrain the min_vruntime invariance to that state. The only other case is wakeup balancing, since we want to maintain the old vruntime we cannot make it relative on dequeue, but since we don't migrate inactive tasks, we can do so right before we activate it again. This is where we need the new pre-wakeup hook, we need to call this while still holding the old rq->lock. We could fold it into ->select_task_rq(), but since that has multiple callsites and would obfuscate the locking requirements, that seems like a fudge. This leaves the fork() case, simply make sure that ->task_fork() leaves the ->vruntime in a relative state. This covers all cases where set_task_cpu() gets called, and ensures it sees a relative vruntime. Signed-off-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091216170518.191697025@chello.nl> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 +- kernel/sched.c | 6 +----- kernel/sched_fair.c | 50 +++++++++++++++++++++++++++++++++++++------ 3 files changed, 46 insertions(+), 12 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 2c9fa1ccebff..973b2b89f86d 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1116,7 +1116,7 @@ struct sched_class { struct task_struct *task); #ifdef CONFIG_FAIR_GROUP_SCHED - void (*moved_group) (struct task_struct *p); + void (*moved_group) (struct task_struct *p, int on_rq); #endif }; diff --git a/kernel/sched.c b/kernel/sched.c index 6c571bdd5658..f92ce63edfff 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2038,8 +2038,6 @@ task_hot(struct task_struct *p, u64 now, struct sched_domain *sd) void set_task_cpu(struct task_struct *p, unsigned int new_cpu) { int old_cpu = task_cpu(p); - struct cfs_rq *old_cfsrq = task_cfs_rq(p), - *new_cfsrq = cpu_cfs_rq(old_cfsrq, new_cpu); #ifdef CONFIG_SCHED_DEBUG /* @@ -2056,8 +2054,6 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu) perf_sw_event(PERF_COUNT_SW_CPU_MIGRATIONS, 1, 1, NULL, 0); } - p->se.vruntime -= old_cfsrq->min_vruntime - - new_cfsrq->min_vruntime; __set_task_cpu(p, new_cpu); } @@ -10102,7 +10098,7 @@ void sched_move_task(struct task_struct *tsk) #ifdef CONFIG_FAIR_GROUP_SCHED if (tsk->sched_class->moved_group) - tsk->sched_class->moved_group(tsk); + tsk->sched_class->moved_group(tsk, on_rq); #endif if (unlikely(running)) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index ec1d2715620c..42ac3c9f66f6 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -510,6 +510,7 @@ __update_curr(struct cfs_rq *cfs_rq, struct sched_entity *curr, curr->sum_exec_runtime += delta_exec; schedstat_add(cfs_rq, exec_clock, delta_exec); delta_exec_weighted = calc_delta_fair(delta_exec, curr); + curr->vruntime += delta_exec_weighted; update_min_vruntime(cfs_rq); } @@ -765,16 +766,26 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial) se->vruntime = vruntime; } +#define ENQUEUE_WAKEUP 1 +#define ENQUEUE_MIGRATE 2 + static void -enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int wakeup) +enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int flags) { + /* + * Update the normalized vruntime before updating min_vruntime + * through callig update_curr(). + */ + if (!(flags & ENQUEUE_WAKEUP) || (flags & ENQUEUE_MIGRATE)) + se->vruntime += cfs_rq->min_vruntime; + /* * Update run-time statistics of the 'current'. */ update_curr(cfs_rq); account_entity_enqueue(cfs_rq, se); - if (wakeup) { + if (flags & ENQUEUE_WAKEUP) { place_entity(cfs_rq, se, 0); enqueue_sleeper(cfs_rq, se); } @@ -828,6 +839,14 @@ dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) __dequeue_entity(cfs_rq, se); account_entity_dequeue(cfs_rq, se); update_min_vruntime(cfs_rq); + + /* + * Normalize the entity after updating the min_vruntime because the + * update can refer to the ->curr item and we need to reflect this + * movement in our normalized position. + */ + if (!sleep) + se->vruntime -= cfs_rq->min_vruntime; } /* @@ -1038,13 +1057,19 @@ static void enqueue_task_fair(struct rq *rq, struct task_struct *p, int wakeup) { struct cfs_rq *cfs_rq; struct sched_entity *se = &p->se; + int flags = 0; + + if (wakeup) + flags |= ENQUEUE_WAKEUP; + if (p->state == TASK_WAKING) + flags |= ENQUEUE_MIGRATE; for_each_sched_entity(se) { if (se->on_rq) break; cfs_rq = cfs_rq_of(se); - enqueue_entity(cfs_rq, se, wakeup); - wakeup = 1; + enqueue_entity(cfs_rq, se, flags); + flags = ENQUEUE_WAKEUP; } hrtick_update(rq); @@ -1120,6 +1145,14 @@ static void yield_task_fair(struct rq *rq) #ifdef CONFIG_SMP +static void task_waking_fair(struct rq *rq, struct task_struct *p) +{ + struct sched_entity *se = &p->se; + struct cfs_rq *cfs_rq = cfs_rq_of(se); + + se->vruntime -= cfs_rq->min_vruntime; +} + #ifdef CONFIG_FAIR_GROUP_SCHED /* * effective_load() calculates the load change as seen from the root_task_group @@ -1978,6 +2011,8 @@ static void task_fork_fair(struct task_struct *p) resched_task(rq->curr); } + se->vruntime -= cfs_rq->min_vruntime; + raw_spin_unlock_irqrestore(&rq->lock, flags); } @@ -2031,12 +2066,13 @@ static void set_curr_task_fair(struct rq *rq) } #ifdef CONFIG_FAIR_GROUP_SCHED -static void moved_group_fair(struct task_struct *p) +static void moved_group_fair(struct task_struct *p, int on_rq) { struct cfs_rq *cfs_rq = task_cfs_rq(p); update_curr(cfs_rq); - place_entity(cfs_rq, &p->se, 1); + if (!on_rq) + place_entity(cfs_rq, &p->se, 1); } #endif @@ -2076,6 +2112,8 @@ static const struct sched_class fair_sched_class = { .move_one_task = move_one_task_fair, .rq_online = rq_online_fair, .rq_offline = rq_offline_fair, + + .task_waking = task_waking_fair, #endif .set_curr_task = set_curr_task_fair, -- GitLab From 738d2be4301007f054541c5c4bf7fb6a361c9b3a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Dec 2009 18:04:42 +0100 Subject: [PATCH 157/618] sched: Simplify set_task_cpu() Rearrange code a bit now that its a simpler function. Signed-off-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091216170518.269101883@chello.nl> Signed-off-by: Ingo Molnar --- kernel/sched.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index f92ce63edfff..8a2bfd37ab4f 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2034,11 +2034,8 @@ task_hot(struct task_struct *p, u64 now, struct sched_domain *sd) return delta < (s64)sysctl_sched_migration_cost; } - void set_task_cpu(struct task_struct *p, unsigned int new_cpu) { - int old_cpu = task_cpu(p); - #ifdef CONFIG_SCHED_DEBUG /* * We should never call set_task_cpu() on a blocked task, @@ -2049,11 +2046,11 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu) trace_sched_migrate_task(p, new_cpu); - if (old_cpu != new_cpu) { - p->se.nr_migrations++; - perf_sw_event(PERF_COUNT_SW_CPU_MIGRATIONS, - 1, 1, NULL, 0); - } + if (task_cpu(p) == new_cpu) + return; + + p->se.nr_migrations++; + perf_sw_event(PERF_COUNT_SW_CPU_MIGRATIONS, 1, 1, NULL, 0); __set_task_cpu(p, new_cpu); } -- GitLab From d93626e861eaab387950ec34346961013ba28d5e Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 Dec 2009 20:06:36 +0000 Subject: [PATCH 158/618] [ARM] Update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 44 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 07b976da6174..c3a74ce24ef6 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Wed Nov 25 22:14:58 2009 +# Last update: Wed Dec 16 20:06:34 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -1776,6 +1776,7 @@ cybook3 MACH_CYBOOK3 CYBOOK3 1784 wdg002 MACH_WDG002 WDG002 1785 sg560adsl MACH_SG560ADSL SG560ADSL 1786 nextio_n2800_ica MACH_NEXTIO_N2800_ICA NEXTIO_N2800_ICA 1787 +dove_db MACH_DOVE_DB DOVE_DB 1788 marvell_newdb MACH_MARVELL_NEWDB MARVELL_NEWDB 1789 vandihud MACH_VANDIHUD VANDIHUD 1790 magx_e8 MACH_MAGX_E8 MAGX_E8 1791 @@ -2536,3 +2537,44 @@ c3ax03 MACH_C3AX03 C3AX03 2549 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 esyx MACH_ESYX ESYX 2551 bulldog MACH_BULLDOG BULLDOG 2553 +derell_me2000 MACH_DERELL_ME2000 DERELL_ME2000 2554 +bcmring_base MACH_BCMRING_BASE BCMRING_BASE 2555 +bcmring_evm MACH_BCMRING_EVM BCMRING_EVM 2556 +bcmring_evm_jazz MACH_BCMRING_EVM_JAZZ BCMRING_EVM_JAZZ 2557 +bcmring_sp MACH_BCMRING_SP BCMRING_SP 2558 +bcmring_sv MACH_BCMRING_SV BCMRING_SV 2559 +bcmring_sv_jazz MACH_BCMRING_SV_JAZZ BCMRING_SV_JAZZ 2560 +bcmring_tablet MACH_BCMRING_TABLET BCMRING_TABLET 2561 +bcmring_vp MACH_BCMRING_VP BCMRING_VP 2562 +bcmring_evm_seikor MACH_BCMRING_EVM_SEIKOR BCMRING_EVM_SEIKOR 2563 +bcmring_sp_wqvga MACH_BCMRING_SP_WQVGA BCMRING_SP_WQVGA 2564 +bcmring_custom MACH_BCMRING_CUSTOM BCMRING_CUSTOM 2565 +acer_s200 MACH_ACER_S200 ACER_S200 2566 +bt270 MACH_BT270 BT270 2567 +iseo MACH_ISEO ISEO 2568 +cezanne MACH_CEZANNE CEZANNE 2569 +lucca MACH_LUCCA LUCCA 2570 +supersmart MACH_SUPERSMART SUPERSMART 2571 +magnolia2 MACH_MAGNOLIA2 MAGNOLIA2 2573 +emxx MACH_EMXX EMXX 2574 +outlaw MACH_OUTLAW OUTLAW 2575 +riot_bei2 MACH_RIOT_BEI2 RIOT_BEI2 2576 +riot_vox MACH_RIOT_VOX RIOT_VOX 2577 +riot_x37 MACH_RIOT_X37 RIOT_X37 2578 +mega25mx MACH_MEGA25MX MEGA25MX 2579 +benzina2 MACH_BENZINA2 BENZINA2 2580 +ignite MACH_IGNITE IGNITE 2581 +foggia MACH_FOGGIA FOGGIA 2582 +arezzo MACH_AREZZO AREZZO 2583 +leica_skywalker MACH_LEICA_SKYWALKER LEICA_SKYWALKER 2584 +jacinto2_jamr MACH_JACINTO2_JAMR JACINTO2_JAMR 2585 +gts_nova MACH_GTS_NOVA GTS_NOVA 2586 +p3600 MACH_P3600 P3600 2587 +dlt2 MACH_DLT2 DLT2 2588 +df3120 MACH_DF3120 DF3120 2589 +ecucore_9g20 MACH_ECUCORE_9G20 ECUCORE_9G20 2590 +nautel_lpc3240 MACH_NAUTEL_LPC3240 NAUTEL_LPC3240 2591 +glacier MACH_GLACIER GLACIER 2592 +phrazer_bulldog MACH_PHRAZER_BULLDOG PHRAZER_BULLDOG 2593 +omap3_bulldog MACH_OMAP3_BULLDOG OMAP3_BULLDOG 2594 +pca101 MACH_PCA101 PCA101 2595 -- GitLab From a7a5ac58df0832daf7774b083c33032a7d26c792 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 15 Dec 2009 21:11:21 +0100 Subject: [PATCH 159/618] PCMCIA: fix pxa2xx_lubbock modular build error Commit d0d26c33b63c7ec10c3fdf9c7ce0aa035f0b3200 broke the driver by propagating a pointer to the platform_device where a pointer to the generic device was expected, leading to a spectacular crash... Signed-off-by: Marc Zyngier Acked-by: Dominik Brodowski Acked-by: Eric Miao Signed-off-by: Russell King --- drivers/pcmcia/pxa2xx_base.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 3aabf1e37988..76e640bccde8 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -291,7 +291,7 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev) skt->nr = ops->first + i; skt->ops = ops; skt->socket.owner = ops->owner; - skt->socket.dev.parent = dev; + skt->socket.dev.parent = &dev->dev; skt->socket.pci_irq = NO_IRQ; ret = pxa2xx_drv_pcmcia_add_one(skt); @@ -304,8 +304,8 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev) soc_pcmcia_remove_one(&sinfo->skt[i]); kfree(sinfo); } else { - pxa2xx_configure_sockets(dev); - dev_set_drvdata(dev, sinfo); + pxa2xx_configure_sockets(&dev->dev); + dev_set_drvdata(&dev->dev, sinfo); } return ret; -- GitLab From 3c57e89b467d1db6fda74d5c97112c8b9466dd97 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 16 Dec 2009 21:38:25 +0100 Subject: [PATCH 160/618] hwmon: New driver for AMD Family 10h/11h CPUs This adds a driver for the internal temperature sensor of AMD Family 10h and 11h CPUs. Signed-off-by: Clemens Ladisch Signed-off-by: Jean Delvare --- Documentation/hwmon/k10temp | 60 +++++++++++ drivers/hwmon/Kconfig | 12 +++ drivers/hwmon/Makefile | 1 + drivers/hwmon/k10temp.c | 197 ++++++++++++++++++++++++++++++++++++ 4 files changed, 270 insertions(+) create mode 100644 Documentation/hwmon/k10temp create mode 100644 drivers/hwmon/k10temp.c diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp new file mode 100644 index 000000000000..a7a18d453a51 --- /dev/null +++ b/Documentation/hwmon/k10temp @@ -0,0 +1,60 @@ +Kernel driver k10temp +===================== + +Supported chips: +* AMD Family 10h processors: + Socket F: Quad-Core/Six-Core/Embedded Opteron + Socket AM2+: Opteron, Phenom (II) X3/X4 + Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II + Socket S1G3: Athlon II, Sempron, Turion II +* AMD Family 11h processors: + Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra) + + Prefix: 'k10temp' + Addresses scanned: PCI space + Datasheets: + BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors: + http://support.amd.com/us/Processor_TechDocs/31116.pdf + BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors: + http://support.amd.com/us/Processor_TechDocs/41256.pdf + Revision Guide for AMD Family 10h Processors: + http://support.amd.com/us/Processor_TechDocs/41322.pdf + Revision Guide for AMD Family 11h Processors: + http://support.amd.com/us/Processor_TechDocs/41788.pdf + AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks: + http://support.amd.com/us/Processor_TechDocs/43373.pdf + AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet: + http://support.amd.com/us/Processor_TechDocs/43374.pdf + AMD Family 10h Desktop Processor Power and Thermal Data Sheet: + http://support.amd.com/us/Processor_TechDocs/43375.pdf + +Author: Clemens Ladisch + +Description +----------- + +This driver permits reading of the internal temperature sensor of AMD +Family 10h and 11h processors. + +All these processors have a sensor, but on older revisions of Family 10h +processors, the sensor may return inconsistent values (erratum 319). The +driver will refuse to load on these revisions unless you specify the +"force=1" module parameter. + +There is one temperature measurement value, available as temp1_input in +sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree. +Please note that it is defined as a relative value; to quote the AMD manual: + + Tctl is the processor temperature control value, used by the platform to + control cooling systems. Tctl is a non-physical temperature on an + arbitrary scale measured in degrees. It does _not_ represent an actual + physical temperature like die or case temperature. Instead, it specifies + the processor temperature relative to the point at which the system must + supply the maximum cooling for the processor's specified maximum case + temperature and maximum thermal power dissipation. + +The maximum value for Tctl is available in the file temp1_max. + +If the BIOS has enabled hardware temperature control, the threshold at +which the processor will throttle itself to avoid damage is available in +temp1_crit and temp1_crit_hyst. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 95ccbe377f9c..665947fbcdcb 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -228,6 +228,18 @@ config SENSORS_K8TEMP This driver can also be built as a module. If so, the module will be called k8temp. +config SENSORS_K10TEMP + tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor" + depends on X86 && PCI + help + If you say yes here you get support for the temperature + sensor(s) inside your CPU. Supported are later revisions of + the AMD Family 10h and all revisions of the AMD Family 11h + microarchitectures. + + This driver can also be built as a module. If so, the module + will be called k10temp. + config SENSORS_AMS tristate "Apple Motion Sensor driver" depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 33c2ee105284..da84a6a69593 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o +obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o obj-$(CONFIG_SENSORS_LM63) += lm63.o diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c new file mode 100644 index 000000000000..d8a26d16d948 --- /dev/null +++ b/drivers/hwmon/k10temp.c @@ -0,0 +1,197 @@ +/* + * k10temp.c - AMD Family 10h/11h processor hardware monitoring + * + * Copyright (c) 2009 Clemens Ladisch + * + * + * This driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License; either + * version 2 of the License, or (at your option) any later version. + * + * This driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this driver; if not, see . + */ + +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor"); +MODULE_AUTHOR("Clemens Ladisch "); +MODULE_LICENSE("GPL"); + +static bool force; +module_param(force, bool, 0444); +MODULE_PARM_DESC(force, "force loading on processors with erratum 319"); + +#define REG_HARDWARE_THERMAL_CONTROL 0x64 +#define HTC_ENABLE 0x00000001 + +#define REG_REPORTED_TEMPERATURE 0xa4 + +#define REG_NORTHBRIDGE_CAPABILITIES 0xe8 +#define NB_CAP_HTC 0x00000400 + +static ssize_t show_temp(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 regval; + + pci_read_config_dword(to_pci_dev(dev), + REG_REPORTED_TEMPERATURE, ®val); + return sprintf(buf, "%u\n", (regval >> 21) * 125); +} + +static ssize_t show_temp_max(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", 70 * 1000); +} + +static ssize_t show_temp_crit(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int show_hyst = attr->index; + u32 regval; + int value; + + pci_read_config_dword(to_pci_dev(dev), + REG_HARDWARE_THERMAL_CONTROL, ®val); + value = ((regval >> 16) & 0x7f) * 500 + 52000; + if (show_hyst) + value -= ((regval >> 24) & 0xf) * 500; + return sprintf(buf, "%d\n", value); +} + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "k10temp\n"); +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); +static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1); +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +static bool __devinit has_erratum_319(void) +{ + /* + * Erratum 319: The thermal sensor of older Family 10h processors + * (B steppings) may be unreliable. + */ + return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2; +} + +static int __devinit k10temp_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct device *hwmon_dev; + u32 reg_caps, reg_htc; + int err; + + if (has_erratum_319() && !force) { + dev_err(&pdev->dev, + "unreliable CPU thermal sensor; monitoring disabled\n"); + err = -ENODEV; + goto exit; + } + + err = device_create_file(&pdev->dev, &dev_attr_temp1_input); + if (err) + goto exit; + err = device_create_file(&pdev->dev, &dev_attr_temp1_max); + if (err) + goto exit_remove; + + pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES, ®_caps); + pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, ®_htc); + if ((reg_caps & NB_CAP_HTC) && (reg_htc & HTC_ENABLE)) { + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp1_crit.dev_attr); + if (err) + goto exit_remove; + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp1_crit_hyst.dev_attr); + if (err) + goto exit_remove; + } + + err = device_create_file(&pdev->dev, &dev_attr_name); + if (err) + goto exit_remove; + + hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(hwmon_dev)) { + err = PTR_ERR(hwmon_dev); + goto exit_remove; + } + dev_set_drvdata(&pdev->dev, hwmon_dev); + + if (has_erratum_319() && force) + dev_warn(&pdev->dev, + "unreliable CPU thermal sensor; check erratum 319\n"); + return 0; + +exit_remove: + device_remove_file(&pdev->dev, &dev_attr_name); + device_remove_file(&pdev->dev, &dev_attr_temp1_input); + device_remove_file(&pdev->dev, &dev_attr_temp1_max); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_crit.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_crit_hyst.dev_attr); +exit: + return err; +} + +static void __devexit k10temp_remove(struct pci_dev *pdev) +{ + hwmon_device_unregister(dev_get_drvdata(&pdev->dev)); + device_remove_file(&pdev->dev, &dev_attr_name); + device_remove_file(&pdev->dev, &dev_attr_temp1_input); + device_remove_file(&pdev->dev, &dev_attr_temp1_max); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_crit.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_crit_hyst.dev_attr); + dev_set_drvdata(&pdev->dev, NULL); +} + +static struct pci_device_id k10temp_id_table[] = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) }, + {} +}; +MODULE_DEVICE_TABLE(pci, k10temp_id_table); + +static struct pci_driver k10temp_driver = { + .name = "k10temp", + .id_table = k10temp_id_table, + .probe = k10temp_probe, + .remove = __devexit_p(k10temp_remove), +}; + +static int __init k10temp_init(void) +{ + return pci_register_driver(&k10temp_driver); +} + +static void __exit k10temp_exit(void) +{ + pci_unregister_driver(&k10temp_driver); +} + +module_init(k10temp_init) +module_exit(k10temp_exit) -- GitLab From a0e92d70f35b5fd7da8ec2160cda78b98e2113bc Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Dec 2009 21:38:26 +0100 Subject: [PATCH 161/618] hwmon: (smsc47m1) Only request I/O ports we really use The I/O area of the SMSC LPC47M1xx chips which we use, gives access to a lot of registers, some of which are related to fan speed monitoring and control, but many are not. At the moment, the smsc47m1 driver requests the whole I/O port range. This could easily result in resource conflicts with either ACPI or other drivers. Request only the I/O ports we really use, to prevent such conflicts. Signed-off-by: Jean Delvare Tested-by: Sean Fidler --- drivers/hwmon/smsc47m1.c | 99 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 89 insertions(+), 10 deletions(-) diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 8ad50fdba00d..bfef22395772 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -481,13 +481,94 @@ static int __init smsc47m1_find(unsigned short *addr, return 0; } +#define CHECK 1 +#define REQUEST 2 +#define RELEASE 3 + +/* + * This function can be used to: + * - test for resource conflicts with ACPI + * - request the resources + * - release the resources + * We only allocate the I/O ports we really need, to minimize the risk of + * conflicts with ACPI or with other drivers. + */ +static int smsc47m1_handle_resources(unsigned short address, enum chips type, + int action, struct device *dev) +{ + static const u8 ports_m1[] = { + /* register, region length */ + 0x04, 1, + 0x33, 4, + 0x56, 7, + }; + + static const u8 ports_m2[] = { + /* register, region length */ + 0x04, 1, + 0x09, 1, + 0x2c, 2, + 0x35, 4, + 0x56, 7, + 0x69, 4, + }; + + int i, ports_size, err; + const u8 *ports; + + switch (type) { + case smsc47m1: + default: + ports = ports_m1; + ports_size = ARRAY_SIZE(ports_m1); + break; + case smsc47m2: + ports = ports_m2; + ports_size = ARRAY_SIZE(ports_m2); + break; + } + + for (i = 0; i + 1 < ports_size; i += 2) { + unsigned short start = address + ports[i]; + unsigned short len = ports[i + 1]; + + switch (action) { + case CHECK: + /* Only check for conflicts */ + err = acpi_check_region(start, len, DRVNAME); + if (err) + return err; + break; + case REQUEST: + /* Request the resources */ + if (!request_region(start, len, DRVNAME)) { + dev_err(dev, "Region 0x%hx-0x%hx already in " + "use!\n", start, start + len); + + /* Undo all requests */ + for (i -= 2; i >= 0; i -= 2) + release_region(address + ports[i], + ports[i + 1]); + return -EBUSY; + } + break; + case RELEASE: + /* Release the resources */ + release_region(start, len); + break; + } + } + + return 0; +} + static int __devinit smsc47m1_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct smsc47m1_sio_data *sio_data = dev->platform_data; struct smsc47m1_data *data; struct resource *res; - int err = 0; + int err; int fan1, fan2, fan3, pwm1, pwm2, pwm3; static const char *names[] = { @@ -496,12 +577,10 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev) }; res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!request_region(res->start, SMSC_EXTENT, DRVNAME)) { - dev_err(dev, "Region 0x%lx-0x%lx already in use!\n", - (unsigned long)res->start, - (unsigned long)res->end); - return -EBUSY; - } + err = smsc47m1_handle_resources(res->start, sio_data->type, + REQUEST, dev); + if (err < 0) + return err; if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) { err = -ENOMEM; @@ -637,7 +716,7 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); kfree(data); error_release: - release_region(res->start, SMSC_EXTENT); + smsc47m1_handle_resources(res->start, sio_data->type, RELEASE, dev); return err; } @@ -650,7 +729,7 @@ static int __devexit smsc47m1_remove(struct platform_device *pdev) sysfs_remove_group(&pdev->dev.kobj, &smsc47m1_group); res = platform_get_resource(pdev, IORESOURCE_IO, 0); - release_region(res->start, SMSC_EXTENT); + smsc47m1_handle_resources(res->start, data->type, RELEASE, &pdev->dev); platform_set_drvdata(pdev, NULL); kfree(data); @@ -717,7 +796,7 @@ static int __init smsc47m1_device_add(unsigned short address, }; int err; - err = acpi_check_resource_conflict(&res); + err = smsc47m1_handle_resources(address, sio_data->type, CHECK, NULL); if (err) goto exit; -- GitLab From 3ecf44b312758d10be20539b06b2df5d77d59cdb Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Dec 2009 21:38:26 +0100 Subject: [PATCH 162/618] hwmon: (smsc47m1) Fail module loading on error If an error occurs during probing, there's no point in keeping the module in memory. Better fail the module loading early to make the problem more visible. Signed-off-by: Jean Delvare Tested-by: Sean Fidler --- drivers/hwmon/smsc47m1.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index bfef22395772..92cca512b38e 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -139,8 +139,7 @@ struct smsc47m1_sio_data { }; -static int smsc47m1_probe(struct platform_device *pdev); -static int __devexit smsc47m1_remove(struct platform_device *pdev); +static int __exit smsc47m1_remove(struct platform_device *pdev); static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, int init); @@ -160,8 +159,7 @@ static struct platform_driver smsc47m1_driver = { .owner = THIS_MODULE, .name = DRVNAME, }, - .probe = smsc47m1_probe, - .remove = __devexit_p(smsc47m1_remove), + .remove = __exit_p(smsc47m1_remove), }; static ssize_t get_fan(struct device *dev, struct device_attribute @@ -562,7 +560,7 @@ static int smsc47m1_handle_resources(unsigned short address, enum chips type, return 0; } -static int __devinit smsc47m1_probe(struct platform_device *pdev) +static int __init smsc47m1_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct smsc47m1_sio_data *sio_data = dev->platform_data; @@ -720,7 +718,7 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev) return err; } -static int __devexit smsc47m1_remove(struct platform_device *pdev) +static int __exit smsc47m1_remove(struct platform_device *pdev) { struct smsc47m1_data *data = platform_get_drvdata(pdev); struct resource *res; @@ -845,27 +843,27 @@ static int __init sm_smsc47m1_init(void) if (smsc47m1_find(&address, &sio_data)) return -ENODEV; - err = platform_driver_register(&smsc47m1_driver); + /* Sets global pdev as a side effect */ + err = smsc47m1_device_add(address, &sio_data); if (err) goto exit; - /* Sets global pdev as a side effect */ - err = smsc47m1_device_add(address, &sio_data); + err = platform_driver_probe(&smsc47m1_driver, smsc47m1_probe); if (err) - goto exit_driver; + goto exit_device; return 0; -exit_driver: - platform_driver_unregister(&smsc47m1_driver); +exit_device: + platform_device_unregister(pdev); exit: return err; } static void __exit sm_smsc47m1_exit(void) { - platform_device_unregister(pdev); platform_driver_unregister(&smsc47m1_driver); + platform_device_unregister(pdev); } MODULE_AUTHOR("Mark D. Studebaker "); -- GitLab From fa0bff02239abdad446effef22e5db281cf3d562 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Dec 2009 21:38:27 +0100 Subject: [PATCH 163/618] hwmon: (smsc47m1) Enable device if needed If the address is set but the device isn't enabled, attempt to enable it. If it won't work for any reason (resource conflict, no function enabled) the initial state is restored. The initial state is also restored on module unloading. Signed-off-by: Jean Delvare Tested-by: Sean Fidler --- drivers/hwmon/smsc47m1.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 92cca512b38e..9ca97818bd4b 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -136,6 +136,7 @@ struct smsc47m1_data { struct smsc47m1_sio_data { enum chips type; + u8 activate; /* Remember initial device state */ }; @@ -468,17 +469,38 @@ static int __init smsc47m1_find(unsigned short *addr, superio_select(); *addr = (superio_inb(SUPERIO_REG_BASE) << 8) | superio_inb(SUPERIO_REG_BASE + 1); - val = superio_inb(SUPERIO_REG_ACT); - if (*addr == 0 || (val & 0x01) == 0) { - pr_info(DRVNAME ": Device is disabled, will not use\n"); + if (*addr == 0) { + pr_info(DRVNAME ": Device address not set, will not use\n"); superio_exit(); return -ENODEV; } + /* Enable only if address is set (needed at least on the + * Compaq Presario S4000NX) */ + sio_data->activate = superio_inb(SUPERIO_REG_ACT); + if ((sio_data->activate & 0x01) == 0) { + pr_info(DRVNAME ": Enabling device\n"); + superio_outb(SUPERIO_REG_ACT, sio_data->activate | 0x01); + } + superio_exit(); return 0; } +/* Restore device to its initial state */ +static void __init smsc47m1_restore(const struct smsc47m1_sio_data *sio_data) +{ + if ((sio_data->activate & 0x01) == 0) { + superio_enter(); + superio_select(); + + pr_info(DRVNAME ": Disabling device\n"); + superio_outb(SUPERIO_REG_ACT, sio_data->activate); + + superio_exit(); + } +} + #define CHECK 1 #define REQUEST 2 #define RELEASE 3 @@ -856,6 +878,7 @@ static int __init sm_smsc47m1_init(void) exit_device: platform_device_unregister(pdev); + smsc47m1_restore(&sio_data); exit: return err; } @@ -863,6 +886,7 @@ static int __init sm_smsc47m1_init(void) static void __exit sm_smsc47m1_exit(void) { platform_driver_unregister(&smsc47m1_driver); + smsc47m1_restore(pdev->dev.platform_data); platform_device_unregister(pdev); } -- GitLab From 70c38772aef27b01dc236fb4016261c3828df6aa Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Wed, 16 Dec 2009 21:38:28 +0100 Subject: [PATCH 164/618] hwmon: Add driver for VIA CPU core temperature This is a driver for the on-die digital temperature sensor of VIA's recent CPU models. [JD: Misc clean-ups.] Signed-off-by: Harald Welte Cc: Juerg Haefliger Signed-off-by: Jean Delvare Tested-by: Adam Nielsen --- drivers/hwmon/Kconfig | 8 + drivers/hwmon/Makefile | 1 + drivers/hwmon/via-cputemp.c | 356 ++++++++++++++++++++++++++++++++++++ 3 files changed, 365 insertions(+) create mode 100644 drivers/hwmon/via-cputemp.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 665947fbcdcb..be8eeadb2ee9 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -822,6 +822,14 @@ config SENSORS_TMP421 This driver can also be built as a module. If so, the module will be called tmp421. +config SENSORS_VIA_CPUTEMP + tristate "VIA CPU temperature sensor" + depends on X86 + help + If you say yes here you get support for the temperature + sensor inside your CPU. Supported are all known variants of + the VIA C7 and Nano. + config SENSORS_VIA686A tristate "VIA686A" depends on PCI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index da84a6a69593..312b7c39d9f4 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o obj-$(CONFIG_SENSORS_THMC50) += thmc50.o obj-$(CONFIG_SENSORS_TMP401) += tmp401.o obj-$(CONFIG_SENSORS_TMP421) += tmp421.o +obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o obj-$(CONFIG_SENSORS_VT1211) += vt1211.o obj-$(CONFIG_SENSORS_VT8231) += vt8231.o diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c new file mode 100644 index 000000000000..7442cf754856 --- /dev/null +++ b/drivers/hwmon/via-cputemp.c @@ -0,0 +1,356 @@ +/* + * via-cputemp.c - Driver for VIA CPU core temperature monitoring + * Copyright (C) 2009 VIA Technologies, Inc. + * + * based on existing coretemp.c, which is + * + * Copyright (C) 2007 Rudolf Marek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301 USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "via_cputemp" + +enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME } SHOW; + +/* + * Functions declaration + */ + +struct via_cputemp_data { + struct device *hwmon_dev; + const char *name; + u32 id; + u32 msr; +}; + +/* + * Sysfs stuff + */ + +static ssize_t show_name(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + int ret; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct via_cputemp_data *data = dev_get_drvdata(dev); + + if (attr->index == SHOW_NAME) + ret = sprintf(buf, "%s\n", data->name); + else /* show label */ + ret = sprintf(buf, "Core %d\n", data->id); + return ret; +} + +static ssize_t show_temp(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct via_cputemp_data *data = dev_get_drvdata(dev); + u32 eax, edx; + int err; + + err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx); + if (err) + return -EAGAIN; + + return sprintf(buf, "%lu\n", ((unsigned long)eax & 0xffffff) * 1000); +} + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, + SHOW_TEMP); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL); +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME); + +static struct attribute *via_cputemp_attributes[] = { + &sensor_dev_attr_name.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group via_cputemp_group = { + .attrs = via_cputemp_attributes, +}; + +static int __devinit via_cputemp_probe(struct platform_device *pdev) +{ + struct via_cputemp_data *data; + struct cpuinfo_x86 *c = &cpu_data(pdev->id); + int err; + u32 eax, edx; + + data = kzalloc(sizeof(struct via_cputemp_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + dev_err(&pdev->dev, "Out of memory\n"); + goto exit; + } + + data->id = pdev->id; + data->name = "via_cputemp"; + + switch (c->x86_model) { + case 0xA: + /* C7 A */ + case 0xD: + /* C7 D */ + data->msr = 0x1169; + break; + case 0xF: + /* Nano */ + data->msr = 0x1423; + break; + default: + err = -ENODEV; + goto exit_free; + } + + /* test if we can access the TEMPERATURE MSR */ + err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx); + if (err) { + dev_err(&pdev->dev, + "Unable to access TEMPERATURE MSR, giving up\n"); + goto exit_free; + } + + platform_set_drvdata(pdev, data); + + err = sysfs_create_group(&pdev->dev.kobj, &via_cputemp_group); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + dev_err(&pdev->dev, "Class registration failed (%d)\n", + err); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group); +exit_free: + platform_set_drvdata(pdev, NULL); + kfree(data); +exit: + return err; +} + +static int __devexit via_cputemp_remove(struct platform_device *pdev) +{ + struct via_cputemp_data *data = platform_get_drvdata(pdev); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group); + platform_set_drvdata(pdev, NULL); + kfree(data); + return 0; +} + +static struct platform_driver via_cputemp_driver = { + .driver = { + .owner = THIS_MODULE, + .name = DRVNAME, + }, + .probe = via_cputemp_probe, + .remove = __devexit_p(via_cputemp_remove), +}; + +struct pdev_entry { + struct list_head list; + struct platform_device *pdev; + unsigned int cpu; +}; + +static LIST_HEAD(pdev_list); +static DEFINE_MUTEX(pdev_list_mutex); + +static int __cpuinit via_cputemp_device_add(unsigned int cpu) +{ + int err; + struct platform_device *pdev; + struct pdev_entry *pdev_entry; + + pdev = platform_device_alloc(DRVNAME, cpu); + if (!pdev) { + err = -ENOMEM; + printk(KERN_ERR DRVNAME ": Device allocation failed\n"); + goto exit; + } + + pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL); + if (!pdev_entry) { + err = -ENOMEM; + goto exit_device_put; + } + + err = platform_device_add(pdev); + if (err) { + printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", + err); + goto exit_device_free; + } + + pdev_entry->pdev = pdev; + pdev_entry->cpu = cpu; + mutex_lock(&pdev_list_mutex); + list_add_tail(&pdev_entry->list, &pdev_list); + mutex_unlock(&pdev_list_mutex); + + return 0; + +exit_device_free: + kfree(pdev_entry); +exit_device_put: + platform_device_put(pdev); +exit: + return err; +} + +#ifdef CONFIG_HOTPLUG_CPU +static void via_cputemp_device_remove(unsigned int cpu) +{ + struct pdev_entry *p, *n; + mutex_lock(&pdev_list_mutex); + list_for_each_entry_safe(p, n, &pdev_list, list) { + if (p->cpu == cpu) { + platform_device_unregister(p->pdev); + list_del(&p->list); + kfree(p); + } + } + mutex_unlock(&pdev_list_mutex); +} + +static int __cpuinit via_cputemp_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long) hcpu; + + switch (action) { + case CPU_ONLINE: + case CPU_DOWN_FAILED: + via_cputemp_device_add(cpu); + break; + case CPU_DOWN_PREPARE: + via_cputemp_device_remove(cpu); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block via_cputemp_cpu_notifier __refdata = { + .notifier_call = via_cputemp_cpu_callback, +}; +#endif /* !CONFIG_HOTPLUG_CPU */ + +static int __init via_cputemp_init(void) +{ + int i, err; + struct pdev_entry *p, *n; + + if (cpu_data(0).x86_vendor != X86_VENDOR_CENTAUR) { + printk(KERN_DEBUG DRVNAME ": Not a VIA CPU\n"); + err = -ENODEV; + goto exit; + } + + err = platform_driver_register(&via_cputemp_driver); + if (err) + goto exit; + + for_each_online_cpu(i) { + struct cpuinfo_x86 *c = &cpu_data(i); + + if (c->x86 != 6) + continue; + + if (c->x86_model < 0x0a) + continue; + + if (c->x86_model > 0x0f) { + printk(KERN_WARNING DRVNAME ": Unknown CPU " + "model 0x%x\n", c->x86_model); + continue; + } + + err = via_cputemp_device_add(i); + if (err) + goto exit_devices_unreg; + } + if (list_empty(&pdev_list)) { + err = -ENODEV; + goto exit_driver_unreg; + } + +#ifdef CONFIG_HOTPLUG_CPU + register_hotcpu_notifier(&via_cputemp_cpu_notifier); +#endif + return 0; + +exit_devices_unreg: + mutex_lock(&pdev_list_mutex); + list_for_each_entry_safe(p, n, &pdev_list, list) { + platform_device_unregister(p->pdev); + list_del(&p->list); + kfree(p); + } + mutex_unlock(&pdev_list_mutex); +exit_driver_unreg: + platform_driver_unregister(&via_cputemp_driver); +exit: + return err; +} + +static void __exit via_cputemp_exit(void) +{ + struct pdev_entry *p, *n; +#ifdef CONFIG_HOTPLUG_CPU + unregister_hotcpu_notifier(&via_cputemp_cpu_notifier); +#endif + mutex_lock(&pdev_list_mutex); + list_for_each_entry_safe(p, n, &pdev_list, list) { + platform_device_unregister(p->pdev); + list_del(&p->list); + kfree(p); + } + mutex_unlock(&pdev_list_mutex); + platform_driver_unregister(&via_cputemp_driver); +} + +MODULE_AUTHOR("Harald Welte "); +MODULE_DESCRIPTION("VIA CPU temperature monitor"); +MODULE_LICENSE("GPL"); + +module_init(via_cputemp_init) +module_exit(via_cputemp_exit) -- GitLab From 4235f684b66d6f00d2cd8849c884cf8f8b57ecad Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 16 Dec 2009 21:38:28 +0100 Subject: [PATCH 165/618] hwmon: (sht15) Off-by-one error in array index + incorrect constants Fix an off-by-one error in array index + incorrect constants. Signed-off-by: Christoph Walser Signed-off-by: Jonathan Cameron Signed-off-by: Jean Delvare --- drivers/hwmon/sht15.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index ebe38b680ee3..864a371f6eb9 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -305,7 +305,7 @@ static inline int sht15_calc_temp(struct sht15_data *data) int d1 = 0; int i; - for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++) + for (i = 1; i < ARRAY_SIZE(temppoints); i++) /* Find pointer to interpolate */ if (data->supply_uV > temppoints[i - 1].vdd) { d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd) @@ -332,12 +332,12 @@ static inline int sht15_calc_humid(struct sht15_data *data) const int c1 = -4; const int c2 = 40500; /* x 10 ^ -6 */ - const int c3 = 2800; /* x10 ^ -9 */ + const int c3 = -2800; /* x10 ^ -9 */ RHlinear = c1*1000 + c2 * data->val_humid/1000 + (data->val_humid * data->val_humid * c3)/1000000; - return (temp - 25000) * (10000 + 800 * data->val_humid) + return (temp - 25000) * (10000 + 80 * data->val_humid) / 1000000 + RHlinear; } -- GitLab From c46c0e9188685c0276b4c0adf9fb7e903937e35b Mon Sep 17 00:00:00 2001 From: Christian Schulte Date: Wed, 16 Dec 2009 21:38:29 +0100 Subject: [PATCH 166/618] hwmon: (w83627hf) Fix for "No such device" The commit b72656dbc491484765776a16eeb55ef2e90efea6 introduced a bug leading to the w83627hf_find function no longer finding any chips. Signed-off-by: Christian Schulte Signed-off-by: Jean Delvare --- drivers/hwmon/w83627hf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index b257c7223733..38e280523071 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -1135,6 +1135,7 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, "W83687THF", }; + sio_data->sioaddr = sioaddr; superio_enter(sio_data); val = force_id ? force_id : superio_inb(sio_data, DEVID); switch (val) { @@ -1177,7 +1178,6 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, } err = 0; - sio_data->sioaddr = sioaddr; pr_info(DRVNAME ": Found %s chip at %#x\n", names[sio_data->type], *addr); -- GitLab From c76f782cb3cfffc1fd4233e11f3116655fa0fcd2 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Tue, 15 Dec 2009 10:38:05 -0800 Subject: [PATCH 167/618] USB ehci: replace mach header with plat Replace the mach/usb.h with plat/usb.h Cc: linux-usb-devel@lists.sourceforge.net Signed-off-by: Thomas Weber Acked-by: Felipe Balbi Acked-by: Greg Kroah-Hartman Signed-off-by: Tony Lindgren --- drivers/usb/host/ehci-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 12f1ad2fd0e8..74d07f4e8b7d 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -37,7 +37,7 @@ #include #include #include -#include +#include /* * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES -- GitLab From ebeb53e1e1f11a51d8a93843a437f516e3528bfa Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Tue, 15 Dec 2009 20:09:02 +0530 Subject: [PATCH 168/618] mfd: twl: fix twl4030 rename for remaining driver, board files Recent drivers/mfd/twl4030* renames to twl broke compile for various boards as the series was missing a patch to change the board-*.c files. This patch renames include twl4030.h to include twl.h and also renames twl4030_i2c_ routines. Signed-off-by: Balaji T K Acked-by: Mark Brown Reviewed-by: Felipe Balbi Cc: Samuel Ortiz Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-cm-t35.c | 2 +- arch/arm/mach-omap2/board-igep0020.c | 2 +- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/mach-omap2/board-omap3touchbook.c | 2 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- arch/arm/mach-omap2/board-zoom-peripherals.c | 2 +- drivers/video/omap/lcd_ldp.c | 4 ++-- drivers/video/omap/lcd_omap2evm.c | 10 +++++----- drivers/video/omap/lcd_omap3beagle.c | 2 +- drivers/video/omap/lcd_omap3evm.c | 10 +++++----- drivers/video/omap/lcd_overo.c | 2 +- sound/soc/omap/sdp3430.c | 6 +++--- 12 files changed, 23 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 1591aae64500..2626a9f8a73a 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -29,7 +29,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 44239e3ec02e..117b8fd7e3a6 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 18913e96e34d..34de17851572 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index c9e5ebb4d91d..fe3d22cb2457 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 17f3c91231db..acafdbc8aa16 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 258794db488f..8dd277c36661 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c index 5bb7f6f14601..0f5952cae85e 100644 --- a/drivers/video/omap/lcd_ldp.c +++ b/drivers/video/omap/lcd_ldp.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include @@ -59,7 +59,7 @@ #define TWL4030_VPLL2_DEV_GRP 0x33 #define TWL4030_VPLL2_DEDICATED 0x36 -#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v) +#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v) static int ldp_panel_init(struct lcd_panel *panel, diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c index 006c2fe7360e..7e7a65c08452 100644 --- a/drivers/video/omap/lcd_omap2evm.c +++ b/drivers/video/omap/lcd_omap2evm.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include @@ -61,9 +61,9 @@ static int omap2evm_panel_init(struct lcd_panel *panel, gpio_direction_output(LCD_PANEL_LR, 1); gpio_direction_output(LCD_PANEL_UD, 1); - twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); + twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); bklight_level = 100; return 0; @@ -101,7 +101,7 @@ static int omap2evm_bklight_setlevel(struct lcd_panel *panel, u8 c; if ((level >= 0) && (level <= 100)) { c = (125 * (100 - level)) / 100 + 2; - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); bklight_level = level; } return 0; diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c index fc503d8f3c24..ca75cc2a87a5 100644 --- a/drivers/video/omap/lcd_omap3beagle.c +++ b/drivers/video/omap/lcd_omap3beagle.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c index ae2edc4081a8..06840da0b094 100644 --- a/drivers/video/omap/lcd_omap3evm.c +++ b/drivers/video/omap/lcd_omap3evm.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include @@ -63,9 +63,9 @@ static int omap3evm_panel_init(struct lcd_panel *panel, gpio_direction_output(LCD_PANEL_LR, 1); gpio_direction_output(LCD_PANEL_UD, 1); - twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); + twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); bklight_level = 100; return 0; @@ -102,7 +102,7 @@ static int omap3evm_bklight_setlevel(struct lcd_panel *panel, u8 c; if ((level >= 0) && (level <= 100)) { c = (125 * (100 - level)) / 100 + 2; - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); bklight_level = level; } return 0; diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c index 56ee192e9ee2..564933ffac6e 100644 --- a/drivers/video/omap/lcd_overo.c +++ b/drivers/video/omap/lcd_overo.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include #include diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index c071f9603a38..3c85c0f92823 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -24,7 +24,7 @@ #include #include -#include +#include #include #include #include @@ -321,11 +321,11 @@ static int __init sdp3430_soc_init(void) *(unsigned int *)sdp3430_dai[1].cpu_dai->private_data = 2; /* McBSP3 */ /* Set TWL4030 GPIO6 as EXTMUTE signal */ - twl4030_i2c_read_u8(TWL4030_MODULE_INTBR, &pin_mux, + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &pin_mux, TWL4030_INTBR_PMBR1); pin_mux &= ~TWL4030_GPIO6_PWM0_MUTE(0x03); pin_mux |= TWL4030_GPIO6_PWM0_MUTE(0x02); - twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, pin_mux, + twl_i2c_write_u8(TWL4030_MODULE_INTBR, pin_mux, TWL4030_INTBR_PMBR1); ret = platform_device_add(sdp3430_snd_device); -- GitLab From f2eeeae06a41d4f9c90f8382cc0ef1d35888d09a Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 14 Dec 2009 13:59:18 +0000 Subject: [PATCH 169/618] OMAP3: serial - fix bug introduced in Commit f62349ee9788b1d94c55eb6c291d74a1f69bdd9e had side effect that causes kernel to oops when we are suspending to ram: # echo mem > /sys/power/state WARNING: at kernel/irq/manage.c:858 __free_irq+0x90/0x174() Trying to free already-free IRQ 72 Modules linked in: Backtrace: [] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c) r7:dfd4be08 r6:c009505c r5:c03fbfd1 r4:0000035a [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x50/0x68) [] (warn_slowpath_common+0x0/0x68) from [] (warn_slowpath_fmt+0x30) r7:c0474afc r6:00000048 r5:00000000 r4:c0474ac0 [] (warn_slowpath_fmt+0x0/0x38) from [] (__free_irq+0x90/0x174) r3:00000048 r2:c03fc0ef [] (__free_irq+0x0/0x174) from [] (free_irq+0x44/0x64) [] (free_irq+0x0/0x64) from [] (omap_uart_enable_irqs+0x4c/0x90) r7:c034d58c r6:00000003 r5:00000000 r4:c0463028 [] (omap_uart_enable_irqs+0x0/0x90) from [] (omap3_pm_begin+0x1c/0) r5:00000003 r4:00000000 [] (omap3_pm_begin+0x0/0x28) from [] (suspend_devices_and_enter+0x) [] (suspend_devices_and_enter+0x0/0x1dc) from [] (enter_state+0xe8) r5:c03f7f46 r4:00000000 [] (enter_state+0x0/0x140) from [] (state_store+0x9c/0xc4) r7:c034d58c r6:00000003 r5:00000003 r4:c03f7f46 [] (state_store+0x0/0xc4) from [] (kobj_attr_store+0x20/0x24) [] (kobj_attr_store+0x0/0x24) from [] (sysfs_write_file+0x114/0x14) [] (sysfs_write_file+0x0/0x148) from [] (vfs_write+0xb8/0x164) [] (vfs_write+0x0/0x164) from [] (sys_write+0x44/0x70) r8:4001f000 r7:00000004 r6:df81bd00 r5:00000000 r4:00000000 [] (sys_write+0x0/0x70) from [] (ret_fast_syscall+0x0/0x38) r8:c002f204 r7:00000004 r6:401fa5e8 r5:4001f000 r4:00000004 This is due the fact that uart_list list was populated in omap_serial_early_init() and omap_uart_enable_irqs() went through this list even when serial idle wasn't enabled for all uarts. This patch moves the code that populates the uart_list and enables uart clocks into omap_serial_init_port(). Signed-off-by: Mika Westerberg Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/serial.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 39b797bc14d6..19805a7de06c 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -640,12 +640,9 @@ void __init omap_serial_early_init(void) uart->num = i; p->private_data = uart; uart->p = p; - list_add_tail(&uart->node, &uart_list); if (cpu_is_omap44xx()) p->irq += 32; - - omap_uart_enable_clocks(uart); } } @@ -673,9 +670,13 @@ void __init omap_serial_init_port(int port) pdev = &uart->pdev; dev = &pdev->dev; + omap_uart_enable_clocks(uart); + omap_uart_reset(uart); omap_uart_idle_init(uart); + list_add_tail(&uart->node, &uart_list); + if (WARN_ON(platform_device_register(pdev))) return; -- GitLab From fa1cc7b5a5c4171dfdcac855428295340ccf87ec Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 15 Dec 2009 15:05:12 -0800 Subject: [PATCH 170/618] keys: PTR_ERR return of wrong pointer in keyctl_get_security() Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Acked-by: David Howells Signed-off-by: James Morris --- security/keys/keyctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c index 06ec722897be..5f830bc6f287 100644 --- a/security/keys/keyctl.c +++ b/security/keys/keyctl.c @@ -1194,7 +1194,7 @@ long keyctl_get_security(key_serial_t keyid, * have the authorisation token handy */ instkey = key_get_instantiation_authkey(keyid); if (IS_ERR(instkey)) - return PTR_ERR(key_ref); + return PTR_ERR(instkey); key_put(instkey); key_ref = lookup_user_key(keyid, KEY_LOOKUP_PARTIAL, 0); -- GitLab From dd880fbe8e4792d1185a5101dc751f49eab0a509 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 15 Dec 2009 15:05:12 -0800 Subject: [PATCH 171/618] security/min_addr.c: make init_mmap_min_addr() static init_mmap_min_addr() is a pure_initcall and should be static. Signed-off-by: H Hartley Sweeten Signed-off-by: Andrew Morton Signed-off-by: James Morris --- security/min_addr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/min_addr.c b/security/min_addr.c index fc43c9d37084..e86f297522bf 100644 --- a/security/min_addr.c +++ b/security/min_addr.c @@ -43,7 +43,7 @@ int mmap_min_addr_handler(struct ctl_table *table, int write, return ret; } -int __init init_mmap_min_addr(void) +static int __init init_mmap_min_addr(void) { update_mmap_min_addr(); -- GitLab From 6e1415467614e854fee660ff6648bd10fa976e95 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 15 Dec 2009 19:27:45 +0000 Subject: [PATCH 172/618] NOMMU: Optimise away the {dac_,}mmap_min_addr tests In NOMMU mode clamp dac_mmap_min_addr to zero to cause the tests on it to be skipped by the compiler. We do this as the minimum mmap address doesn't make any sense in NOMMU mode. mmap_min_addr and round_hint_to_min() can be discarded entirely in NOMMU mode. Signed-off-by: David Howells Acked-by: Eric Paris Signed-off-by: James Morris --- include/linux/security.h | 7 +++++++ kernel/sysctl.c | 2 ++ mm/Kconfig | 1 + security/Makefile | 3 ++- 4 files changed, 12 insertions(+), 1 deletion(-) diff --git a/include/linux/security.h b/include/linux/security.h index 466cbadbd1ef..2c627d361c02 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -95,8 +95,13 @@ struct seq_file; extern int cap_netlink_send(struct sock *sk, struct sk_buff *skb); extern int cap_netlink_recv(struct sk_buff *skb, int cap); +#ifdef CONFIG_MMU extern unsigned long mmap_min_addr; extern unsigned long dac_mmap_min_addr; +#else +#define dac_mmap_min_addr 0UL +#endif + /* * Values used in the task_security_ops calls */ @@ -121,6 +126,7 @@ struct request_sock; #define LSM_UNSAFE_PTRACE 2 #define LSM_UNSAFE_PTRACE_CAP 4 +#ifdef CONFIG_MMU /* * If a hint addr is less than mmap_min_addr change hint to be as * low as possible but still greater than mmap_min_addr @@ -135,6 +141,7 @@ static inline unsigned long round_hint_to_min(unsigned long hint) } extern int mmap_min_addr_handler(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); +#endif #ifdef CONFIG_SECURITY diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 45e4bef0012a..856a24eadf7e 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1214,6 +1214,7 @@ static struct ctl_table vm_table[] = { .proc_handler = proc_dointvec_jiffies, }, #endif +#ifdef CONFIG_MMU { .procname = "mmap_min_addr", .data = &dac_mmap_min_addr, @@ -1221,6 +1222,7 @@ static struct ctl_table vm_table[] = { .mode = 0644, .proc_handler = mmap_min_addr_handler, }, +#endif #ifdef CONFIG_NUMA { .procname = "numa_zonelist_order", diff --git a/mm/Kconfig b/mm/Kconfig index 43ea8c3a2bbf..ee9f3e0f2b69 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -221,6 +221,7 @@ config KSM config DEFAULT_MMAP_MIN_ADDR int "Low address space to protect from user allocation" + depends on MMU default 4096 help This is the portion of low virtual memory which should be protected diff --git a/security/Makefile b/security/Makefile index bb44e350c618..da20a193c8dd 100644 --- a/security/Makefile +++ b/security/Makefile @@ -8,7 +8,8 @@ subdir-$(CONFIG_SECURITY_SMACK) += smack subdir-$(CONFIG_SECURITY_TOMOYO) += tomoyo # always enable default capabilities -obj-y += commoncap.o min_addr.o +obj-y += commoncap.o +obj-$(CONFIG_MMU) += min_addr.o # Object file lists obj-$(CONFIG_SECURITY) += security.o capability.o -- GitLab From a00ae4d21b2fa9379914f270ffffd8d3bec55430 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 13 Dec 2009 20:21:34 +0100 Subject: [PATCH 173/618] Keys: KEYCTL_SESSION_TO_PARENT needs TIF_NOTIFY_RESUME architecture support As of commit ee18d64c1f632043a02e6f5ba5e045bb26a5465f ("KEYS: Add a keyctl to install a process's session keyring on its parent [try #6]"), CONFIG_KEYS=y fails to build on architectures that haven't implemented TIF_NOTIFY_RESUME yet: security/keys/keyctl.c: In function 'keyctl_session_to_parent': security/keys/keyctl.c:1312: error: 'TIF_NOTIFY_RESUME' undeclared (first use in this function) security/keys/keyctl.c:1312: error: (Each undeclared identifier is reported only once security/keys/keyctl.c:1312: error: for each function it appears in.) Make KEYCTL_SESSION_TO_PARENT depend on TIF_NOTIFY_RESUME until m68k, and xtensa have implemented it. Signed-off-by: Geert Uytterhoeven Signed-off-by: James Morris Acked-by: Mike Frysinger --- security/keys/keyctl.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c index 5f830bc6f287..e9c2e7c584d9 100644 --- a/security/keys/keyctl.c +++ b/security/keys/keyctl.c @@ -1236,6 +1236,7 @@ long keyctl_get_security(key_serial_t keyid, */ long keyctl_session_to_parent(void) { +#ifdef TIF_NOTIFY_RESUME struct task_struct *me, *parent; const struct cred *mycred, *pcred; struct cred *cred, *oldcred; @@ -1326,6 +1327,15 @@ long keyctl_session_to_parent(void) error_keyring: key_ref_put(keyring_r); return ret; + +#else /* !TIF_NOTIFY_RESUME */ + /* + * To be removed when TIF_NOTIFY_RESUME has been implemented on + * m68k/xtensa + */ +#warning TIF_NOTIFY_RESUME not implemented + return -EOPNOTSUPP; +#endif /* !TIF_NOTIFY_RESUME */ } /*****************************************************************************/ -- GitLab From 9d260ebc09a0ad6b5c73e17676df42c7bc75ff64 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 16 Dec 2009 15:43:55 +0100 Subject: [PATCH 174/618] x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space Use NodeId MSR to get NodeId and number of nodes per processor. Signed-off-by: Andreas Herrmann LKML-Reference: <20091216144355.GB28798@alberich.amd.com> Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/cpufeature.h | 1 + arch/x86/include/asm/msr-index.h | 1 + arch/x86/kernel/cpu/amd.c | 53 +++++++++---------------------- 3 files changed, 17 insertions(+), 38 deletions(-) diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 613700f27a4a..637e1ec963c3 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -153,6 +153,7 @@ #define X86_FEATURE_SSE5 (6*32+11) /* SSE-5 */ #define X86_FEATURE_SKINIT (6*32+12) /* SKINIT/STGI instructions */ #define X86_FEATURE_WDT (6*32+13) /* Watchdog timer */ +#define X86_FEATURE_NODEID_MSR (6*32+19) /* NodeId MSR */ /* * Auxiliary flags: Linux defined - For features scattered in various diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index ac98d2914ebf..1cd58cdbc03f 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -124,6 +124,7 @@ #define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2 #define FAM10H_MMIO_CONF_BASE_MASK 0xfffffff #define FAM10H_MMIO_CONF_BASE_SHIFT 20 +#define MSR_FAM10H_NODE_ID 0xc001100c /* K8 MSRs */ #define MSR_K8_TOP_MEM1 0xc001001a diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 8dc3ea145c97..e485825130d2 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -254,59 +254,36 @@ static int __cpuinit nearby_node(int apicid) /* * Fixup core topology information for AMD multi-node processors. - * Assumption 1: Number of cores in each internal node is the same. - * Assumption 2: Mixed systems with both single-node and dual-node - * processors are not supported. + * Assumption: Number of cores in each internal node is the same. */ #ifdef CONFIG_X86_HT static void __cpuinit amd_fixup_dcm(struct cpuinfo_x86 *c) { -#ifdef CONFIG_PCI - u32 t, cpn; - u8 n, n_id; + unsigned long long value; + u32 nodes, cores_per_node; int cpu = smp_processor_id(); + if (!cpu_has(c, X86_FEATURE_NODEID_MSR)) + return; + /* fixup topology information only once for a core */ if (cpu_has(c, X86_FEATURE_AMD_DCM)) return; - /* check for multi-node processor on boot cpu */ - t = read_pci_config(0, 24, 3, 0xe8); - if (!(t & (1 << 29))) + rdmsrl(MSR_FAM10H_NODE_ID, value); + + nodes = ((value >> 3) & 7) + 1; + if (nodes == 1) return; set_cpu_cap(c, X86_FEATURE_AMD_DCM); + cores_per_node = c->x86_max_cores / nodes; - /* cores per node: each internal node has half the number of cores */ - cpn = c->x86_max_cores >> 1; + /* store NodeID, use llc_shared_map to store sibling info */ + per_cpu(cpu_llc_id, cpu) = value & 7; - /* even-numbered NB_id of this dual-node processor */ - n = c->phys_proc_id << 1; - - /* - * determine internal node id and assign cores fifty-fifty to - * each node of the dual-node processor - */ - t = read_pci_config(0, 24 + n, 3, 0xe8); - n = (t>>30) & 0x3; - if (n == 0) { - if (c->cpu_core_id < cpn) - n_id = 0; - else - n_id = 1; - } else { - if (c->cpu_core_id < cpn) - n_id = 1; - else - n_id = 0; - } - - /* compute entire NodeID, use llc_shared_map to store sibling info */ - per_cpu(cpu_llc_id, cpu) = (c->phys_proc_id << 1) + n_id; - - /* fixup core id to be in range from 0 to cpn */ - c->cpu_core_id = c->cpu_core_id % cpn; -#endif + /* fixup core id to be in range from 0 to (cores_per_node - 1) */ + c->cpu_core_id = c->cpu_core_id % cores_per_node; } #endif -- GitLab From 6ede31e03084ee084bcee073ef3d1136f68d0906 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 17 Dec 2009 00:16:25 +0100 Subject: [PATCH 175/618] x86, msr: msrs_alloc/free for CONFIG_SMP=n Randy Dunlap reported the following build error: "When CONFIG_SMP=n, CONFIG_X86_MSR=m: ERROR: "msrs_free" [drivers/edac/amd64_edac_mod.ko] undefined! ERROR: "msrs_alloc" [drivers/edac/amd64_edac_mod.ko] undefined!" This is due to the fact that is conditioned on CONFIG_SMP and in the UP case we have only the stubs in the header. Fork off SMP functionality into a new file (msr-smp.c) and build msrs_{alloc,free} unconditionally. Reported-by: Randy Dunlap Cc: H. Peter Anvin Signed-off-by: Borislav Petkov LKML-Reference: <20091216231625.GD27228@liondog.tnic> Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/msr.h | 12 +++ arch/x86/lib/Makefile | 4 +- arch/x86/lib/msr-smp.c | 204 +++++++++++++++++++++++++++++++++++ arch/x86/lib/msr.c | 213 ------------------------------------- 4 files changed, 218 insertions(+), 215 deletions(-) create mode 100644 arch/x86/lib/msr-smp.c diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index cf985aa00660..c5bc4c2d33f5 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -27,6 +27,18 @@ struct msr { }; }; +struct msr_info { + u32 msr_no; + struct msr reg; + struct msr *msrs; + int err; +}; + +struct msr_regs_info { + u32 *regs; + int err; +}; + static inline unsigned long long native_read_tscp(unsigned int *aux) { unsigned long low, high; diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index a2d6472895fb..706be8bf967b 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -14,7 +14,7 @@ $(obj)/inat.o: $(obj)/inat-tables.c clean-files := inat-tables.c -obj-$(CONFIG_SMP) := msr.o +obj-$(CONFIG_SMP) += msr-smp.o lib-y := delay.o lib-y += thunk_$(BITS).o @@ -22,7 +22,7 @@ lib-y += usercopy_$(BITS).o getuser.o putuser.o lib-y += memcpy_$(BITS).o lib-y += insn.o inat.o -obj-y += msr-reg.o msr-reg-export.o +obj-y += msr.o msr-reg.o msr-reg-export.o ifeq ($(CONFIG_X86_32),y) obj-y += atomic64_32.o diff --git a/arch/x86/lib/msr-smp.c b/arch/x86/lib/msr-smp.c new file mode 100644 index 000000000000..a6b1b86d2253 --- /dev/null +++ b/arch/x86/lib/msr-smp.c @@ -0,0 +1,204 @@ +#include +#include +#include +#include + +static void __rdmsr_on_cpu(void *info) +{ + struct msr_info *rv = info; + struct msr *reg; + int this_cpu = raw_smp_processor_id(); + + if (rv->msrs) + reg = per_cpu_ptr(rv->msrs, this_cpu); + else + reg = &rv->reg; + + rdmsr(rv->msr_no, reg->l, reg->h); +} + +static void __wrmsr_on_cpu(void *info) +{ + struct msr_info *rv = info; + struct msr *reg; + int this_cpu = raw_smp_processor_id(); + + if (rv->msrs) + reg = per_cpu_ptr(rv->msrs, this_cpu); + else + reg = &rv->reg; + + wrmsr(rv->msr_no, reg->l, reg->h); +} + +int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) +{ + int err; + struct msr_info rv; + + memset(&rv, 0, sizeof(rv)); + + rv.msr_no = msr_no; + err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1); + *l = rv.reg.l; + *h = rv.reg.h; + + return err; +} +EXPORT_SYMBOL(rdmsr_on_cpu); + +int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) +{ + int err; + struct msr_info rv; + + memset(&rv, 0, sizeof(rv)); + + rv.msr_no = msr_no; + rv.reg.l = l; + rv.reg.h = h; + err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1); + + return err; +} +EXPORT_SYMBOL(wrmsr_on_cpu); + +static void __rwmsr_on_cpus(const struct cpumask *mask, u32 msr_no, + struct msr *msrs, + void (*msr_func) (void *info)) +{ + struct msr_info rv; + int this_cpu; + + memset(&rv, 0, sizeof(rv)); + + rv.msrs = msrs; + rv.msr_no = msr_no; + + this_cpu = get_cpu(); + + if (cpumask_test_cpu(this_cpu, mask)) + msr_func(&rv); + + smp_call_function_many(mask, msr_func, &rv, 1); + put_cpu(); +} + +/* rdmsr on a bunch of CPUs + * + * @mask: which CPUs + * @msr_no: which MSR + * @msrs: array of MSR values + * + */ +void rdmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs) +{ + __rwmsr_on_cpus(mask, msr_no, msrs, __rdmsr_on_cpu); +} +EXPORT_SYMBOL(rdmsr_on_cpus); + +/* + * wrmsr on a bunch of CPUs + * + * @mask: which CPUs + * @msr_no: which MSR + * @msrs: array of MSR values + * + */ +void wrmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs) +{ + __rwmsr_on_cpus(mask, msr_no, msrs, __wrmsr_on_cpu); +} +EXPORT_SYMBOL(wrmsr_on_cpus); + +/* These "safe" variants are slower and should be used when the target MSR + may not actually exist. */ +static void __rdmsr_safe_on_cpu(void *info) +{ + struct msr_info *rv = info; + + rv->err = rdmsr_safe(rv->msr_no, &rv->reg.l, &rv->reg.h); +} + +static void __wrmsr_safe_on_cpu(void *info) +{ + struct msr_info *rv = info; + + rv->err = wrmsr_safe(rv->msr_no, rv->reg.l, rv->reg.h); +} + +int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) +{ + int err; + struct msr_info rv; + + memset(&rv, 0, sizeof(rv)); + + rv.msr_no = msr_no; + err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1); + *l = rv.reg.l; + *h = rv.reg.h; + + return err ? err : rv.err; +} +EXPORT_SYMBOL(rdmsr_safe_on_cpu); + +int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) +{ + int err; + struct msr_info rv; + + memset(&rv, 0, sizeof(rv)); + + rv.msr_no = msr_no; + rv.reg.l = l; + rv.reg.h = h; + err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1); + + return err ? err : rv.err; +} +EXPORT_SYMBOL(wrmsr_safe_on_cpu); + +/* + * These variants are significantly slower, but allows control over + * the entire 32-bit GPR set. + */ +static void __rdmsr_safe_regs_on_cpu(void *info) +{ + struct msr_regs_info *rv = info; + + rv->err = rdmsr_safe_regs(rv->regs); +} + +static void __wrmsr_safe_regs_on_cpu(void *info) +{ + struct msr_regs_info *rv = info; + + rv->err = wrmsr_safe_regs(rv->regs); +} + +int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs) +{ + int err; + struct msr_regs_info rv; + + rv.regs = regs; + rv.err = -EIO; + err = smp_call_function_single(cpu, __rdmsr_safe_regs_on_cpu, &rv, 1); + + return err ? err : rv.err; +} +EXPORT_SYMBOL(rdmsr_safe_regs_on_cpu); + +int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs) +{ + int err; + struct msr_regs_info rv; + + rv.regs = regs; + rv.err = -EIO; + err = smp_call_function_single(cpu, __wrmsr_safe_regs_on_cpu, &rv, 1); + + return err ? err : rv.err; +} +EXPORT_SYMBOL(wrmsr_safe_regs_on_cpu); diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c index 872834177937..8f8eebdca7d4 100644 --- a/arch/x86/lib/msr.c +++ b/arch/x86/lib/msr.c @@ -1,123 +1,7 @@ #include #include -#include #include -struct msr_info { - u32 msr_no; - struct msr reg; - struct msr *msrs; - int err; -}; - -static void __rdmsr_on_cpu(void *info) -{ - struct msr_info *rv = info; - struct msr *reg; - int this_cpu = raw_smp_processor_id(); - - if (rv->msrs) - reg = per_cpu_ptr(rv->msrs, this_cpu); - else - reg = &rv->reg; - - rdmsr(rv->msr_no, reg->l, reg->h); -} - -static void __wrmsr_on_cpu(void *info) -{ - struct msr_info *rv = info; - struct msr *reg; - int this_cpu = raw_smp_processor_id(); - - if (rv->msrs) - reg = per_cpu_ptr(rv->msrs, this_cpu); - else - reg = &rv->reg; - - wrmsr(rv->msr_no, reg->l, reg->h); -} - -int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) -{ - int err; - struct msr_info rv; - - memset(&rv, 0, sizeof(rv)); - - rv.msr_no = msr_no; - err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1); - *l = rv.reg.l; - *h = rv.reg.h; - - return err; -} -EXPORT_SYMBOL(rdmsr_on_cpu); - -int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) -{ - int err; - struct msr_info rv; - - memset(&rv, 0, sizeof(rv)); - - rv.msr_no = msr_no; - rv.reg.l = l; - rv.reg.h = h; - err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1); - - return err; -} -EXPORT_SYMBOL(wrmsr_on_cpu); - -static void __rwmsr_on_cpus(const struct cpumask *mask, u32 msr_no, - struct msr *msrs, - void (*msr_func) (void *info)) -{ - struct msr_info rv; - int this_cpu; - - memset(&rv, 0, sizeof(rv)); - - rv.msrs = msrs; - rv.msr_no = msr_no; - - this_cpu = get_cpu(); - - if (cpumask_test_cpu(this_cpu, mask)) - msr_func(&rv); - - smp_call_function_many(mask, msr_func, &rv, 1); - put_cpu(); -} - -/* rdmsr on a bunch of CPUs - * - * @mask: which CPUs - * @msr_no: which MSR - * @msrs: array of MSR values - * - */ -void rdmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs) -{ - __rwmsr_on_cpus(mask, msr_no, msrs, __rdmsr_on_cpu); -} -EXPORT_SYMBOL(rdmsr_on_cpus); - -/* - * wrmsr on a bunch of CPUs - * - * @mask: which CPUs - * @msr_no: which MSR - * @msrs: array of MSR values - * - */ -void wrmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs) -{ - __rwmsr_on_cpus(mask, msr_no, msrs, __wrmsr_on_cpu); -} -EXPORT_SYMBOL(wrmsr_on_cpus); - struct msr *msrs_alloc(void) { struct msr *msrs = NULL; @@ -137,100 +21,3 @@ void msrs_free(struct msr *msrs) free_percpu(msrs); } EXPORT_SYMBOL(msrs_free); - -/* These "safe" variants are slower and should be used when the target MSR - may not actually exist. */ -static void __rdmsr_safe_on_cpu(void *info) -{ - struct msr_info *rv = info; - - rv->err = rdmsr_safe(rv->msr_no, &rv->reg.l, &rv->reg.h); -} - -static void __wrmsr_safe_on_cpu(void *info) -{ - struct msr_info *rv = info; - - rv->err = wrmsr_safe(rv->msr_no, rv->reg.l, rv->reg.h); -} - -int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) -{ - int err; - struct msr_info rv; - - memset(&rv, 0, sizeof(rv)); - - rv.msr_no = msr_no; - err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1); - *l = rv.reg.l; - *h = rv.reg.h; - - return err ? err : rv.err; -} -EXPORT_SYMBOL(rdmsr_safe_on_cpu); - -int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) -{ - int err; - struct msr_info rv; - - memset(&rv, 0, sizeof(rv)); - - rv.msr_no = msr_no; - rv.reg.l = l; - rv.reg.h = h; - err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1); - - return err ? err : rv.err; -} -EXPORT_SYMBOL(wrmsr_safe_on_cpu); - -/* - * These variants are significantly slower, but allows control over - * the entire 32-bit GPR set. - */ -struct msr_regs_info { - u32 *regs; - int err; -}; - -static void __rdmsr_safe_regs_on_cpu(void *info) -{ - struct msr_regs_info *rv = info; - - rv->err = rdmsr_safe_regs(rv->regs); -} - -static void __wrmsr_safe_regs_on_cpu(void *info) -{ - struct msr_regs_info *rv = info; - - rv->err = wrmsr_safe_regs(rv->regs); -} - -int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs) -{ - int err; - struct msr_regs_info rv; - - rv.regs = regs; - rv.err = -EIO; - err = smp_call_function_single(cpu, __rdmsr_safe_regs_on_cpu, &rv, 1); - - return err ? err : rv.err; -} -EXPORT_SYMBOL(rdmsr_safe_regs_on_cpu); - -int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs) -{ - int err; - struct msr_regs_info rv; - - rv.regs = regs; - rv.err = -EIO; - err = smp_call_function_single(cpu, __wrmsr_safe_regs_on_cpu, &rv, 1); - - return err ? err : rv.err; -} -EXPORT_SYMBOL(wrmsr_safe_regs_on_cpu); -- GitLab From cf1e367ee84e02ac349ad0858eb65e8a6a511c8b Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 17 Dec 2009 11:15:42 +1100 Subject: [PATCH 176/618] timers: Remove duplicate setting of new_base in __mod_timer() new_base is set using per_cpu(tvec_bases, cpu) after selecting the desired value of cpu immediately below so this line is a unnecessary. Signed-off-by: Simon Horman LKML-Reference: <20091217001542.GD25317@verge.net.au> Signed-off-by: Thomas Gleixner --- kernel/timer.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/timer.c b/kernel/timer.c index 5db5a8d26811..15533b792397 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -656,8 +656,6 @@ __mod_timer(struct timer_list *timer, unsigned long expires, debug_activate(timer, expires); - new_base = __get_cpu_var(tvec_bases); - cpu = smp_processor_id(); #if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP) -- GitLab From 45a94d7cd45ed991914011919e7d40eb6d2546d1 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Wed, 16 Dec 2009 16:25:42 -0800 Subject: [PATCH 177/618] x86, cpuid: Add "volatile" to asm in native_cpuid() xsave_cntxt_init() does something like: cpuid(0xd, ..); // find out what features FP/SSE/.. etc are supported xsetbv(); // enable the features known to OS cpuid(0xd, ..); // find out the size of the context for features enabled Depending on what features get enabled in xsetbv(), value of the cpuid.eax=0xd.ecx=0.ebx changes correspondingly (representing the size of the context that is enabled). As we don't have volatile keyword for native_cpuid(), gcc 4.1.2 optimizes away the second cpuid and the kernel continues to use the cpuid information obtained before xsetbv(), ultimately leading to kernel crash on processors supporting more state than the legacy FP/SSE. Add "volatile" for native_cpuid(). Signed-off-by: Suresh Siddha LKML-Reference: <1261009542.2745.55.camel@sbs-t61.sc.intel.com> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/processor.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 6f8ec1c37e0a..fc801bab1b3b 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -181,7 +181,7 @@ static inline void native_cpuid(unsigned int *eax, unsigned int *ebx, unsigned int *ecx, unsigned int *edx) { /* ecx is often an input as well as an output. */ - asm("cpuid" + asm volatile("cpuid" : "=a" (*eax), "=b" (*ebx), "=c" (*ecx), -- GitLab From 329962503692b42d8088f31584e42d52db179d52 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 15 Dec 2009 17:59:02 -0800 Subject: [PATCH 178/618] x86: Fix checking of SRAT when node 0 ram is not from 0 Found one system that boot from socket1 instead of socket0, SRAT get rejected... [ 0.000000] SRAT: Node 1 PXM 0 0-a0000 [ 0.000000] SRAT: Node 1 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 0 100000000-2080000000 [ 0.000000] SRAT: Node 0 PXM 1 2080000000-4080000000 [ 0.000000] SRAT: Node 2 PXM 2 4080000000-6080000000 [ 0.000000] SRAT: Node 3 PXM 3 6080000000-8080000000 [ 0.000000] SRAT: Node 4 PXM 4 8080000000-a080000000 [ 0.000000] SRAT: Node 5 PXM 5 a080000000-c080000000 [ 0.000000] SRAT: Node 6 PXM 6 c080000000-e080000000 [ 0.000000] SRAT: Node 7 PXM 7 e080000000-10080000000 ... [ 0.000000] NUMA: Allocated memnodemap from 500000 - 701040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Adding active range (0, 0x2080000, 0x4080000) 0 entries of 3200 used [ 0.000000] Adding active range (1, 0x0, 0x96) 1 entries of 3200 used [ 0.000000] Adding active range (1, 0x100, 0x7f750) 2 entries of 3200 used [ 0.000000] Adding active range (1, 0x100000, 0x2080000) 3 entries of 3200 used [ 0.000000] Adding active range (2, 0x4080000, 0x6080000) 4 entries of 3200 used [ 0.000000] Adding active range (3, 0x6080000, 0x8080000) 5 entries of 3200 used [ 0.000000] Adding active range (4, 0x8080000, 0xa080000) 6 entries of 3200 used [ 0.000000] Adding active range (5, 0xa080000, 0xc080000) 7 entries of 3200 used [ 0.000000] Adding active range (6, 0xc080000, 0xe080000) 8 entries of 3200 used [ 0.000000] Adding active range (7, 0xe080000, 0x10080000) 9 entries of 3200 used [ 0.000000] SRAT: PXMs only cover 917504MB of your 1048566MB e820 RAM. Not used. [ 0.000000] SRAT: SRAT not used. the early_node_map is not sorted because node0 with non zero start come first. so try to sort it right away after all regions are registered. also fixs refression by 8716273c (x86: Export srat physical topology) -v2: make it more solid to handle cross node case like node0 [0,4g), [8,12g) and node1 [4g, 8g), [12g, 16g) -v3: update comments. Reported-and-tested-by: Jens Axboe Signed-off-by: Yinghai Lu LKML-Reference: <4B2579D2.3010201@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/mm/srat_32.c | 2 ++ arch/x86/mm/srat_64.c | 4 +++- include/linux/mm.h | 3 +++ mm/page_alloc.c | 4 ++-- 4 files changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index 6f8aa33031c7..9324f13492d5 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -267,6 +267,8 @@ int __init get_memcfg_from_srat(void) e820_register_active_regions(chunk->nid, chunk->start_pfn, min(chunk->end_pfn, max_pfn)); } + /* for out of order entries in SRAT */ + sort_node_map(); for_each_online_node(nid) { unsigned long start = node_start_pfn[nid]; diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index d89075489664..a27124185fc1 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -317,7 +317,7 @@ static int __init nodes_cover_memory(const struct bootnode *nodes) unsigned long s = nodes[i].start >> PAGE_SHIFT; unsigned long e = nodes[i].end >> PAGE_SHIFT; pxmram += e - s; - pxmram -= absent_pages_in_range(s, e); + pxmram -= __absent_pages_in_range(i, s, e); if ((long)pxmram < 0) pxmram = 0; } @@ -373,6 +373,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) for_each_node_mask(i, nodes_parsed) e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT, nodes[i].end >> PAGE_SHIFT); + /* for out of order entries in SRAT */ + sort_node_map(); if (!nodes_cover_memory(nodes)) { bad_srat(); return -1; diff --git a/include/linux/mm.h b/include/linux/mm.h index 24c395694f4d..20a2036f3a94 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1022,6 +1022,9 @@ extern void add_active_range(unsigned int nid, unsigned long start_pfn, extern void remove_active_range(unsigned int nid, unsigned long start_pfn, unsigned long end_pfn); extern void remove_all_active_ranges(void); +void sort_node_map(void); +unsigned long __absent_pages_in_range(int nid, unsigned long start_pfn, + unsigned long end_pfn); extern unsigned long absent_pages_in_range(unsigned long start_pfn, unsigned long end_pfn); extern void get_pfn_range_for_nid(unsigned int nid, diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 2bc2ac63f41e..873c86308b4e 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3573,7 +3573,7 @@ static unsigned long __meminit zone_spanned_pages_in_node(int nid, * Return the number of holes in a range on a node. If nid is MAX_NUMNODES, * then all holes in the requested range will be accounted for. */ -static unsigned long __meminit __absent_pages_in_range(int nid, +unsigned long __meminit __absent_pages_in_range(int nid, unsigned long range_start_pfn, unsigned long range_end_pfn) { @@ -4102,7 +4102,7 @@ static int __init cmp_node_active_region(const void *a, const void *b) } /* sort the node_map by start_pfn */ -static void __init sort_node_map(void) +void __init sort_node_map(void) { sort(early_node_map, (size_t)nr_nodemap_entries, sizeof(struct node_active_region), -- GitLab From 6a1e008a0915f502eb026fb995ea3e49d5b017f7 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 15 Dec 2009 17:59:03 -0800 Subject: [PATCH 179/618] x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA Due to recent changes wakeup and mptable, we run out of early reservations on 32-bit NUMA. Thus, adjust the available number. Signed-off-by: Yinghai Lu LKML-Reference: <4B22D754.2020706@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/e820.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index f50447d961c0..05ed7ab2ca48 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -724,7 +724,7 @@ core_initcall(e820_mark_nvs_memory); /* * Early reserved memory areas. */ -#define MAX_EARLY_RES 20 +#define MAX_EARLY_RES 32 struct early_res { u64 start, end; -- GitLab From f6325e30ebd6fc870315b017a5d4a6ab15bf790b Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 17 Dec 2009 11:43:08 -0600 Subject: [PATCH 180/618] cpumask: use cpu_online in kernel/perf_event.c Also, we want to check against nr_cpu_ids, not num_possible_cpus(). The latter works, but the correct bounds check is < nr_cpu_ids. Signed-off-by: Rusty Russell To: Thomas Gleixner --- kernel/perf_event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 8ab86988bd24..97d1a3dd7a59 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -1614,7 +1614,7 @@ static struct perf_event_context *find_get_context(pid_t pid, int cpu) * offline CPU and activate it when the CPU comes up, but * that's for later. */ - if (!cpu_isset(cpu, cpu_online_map)) + if (!cpu_online(cpu)) return ERR_PTR(-ENODEV); cpuctx = &per_cpu(perf_cpu_context, cpu); -- GitLab From 58463c1fe25f7c4183f30f06a5a86cb6cd9d8231 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 17 Dec 2009 11:43:12 -0600 Subject: [PATCH 181/618] cpumask: avoid deprecated function in mm/slab.c These days we use cpumask_empty() which takes a pointer. Signed-off-by: Rusty Russell Acked-by: Christoph Lameter --- mm/slab.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/slab.c b/mm/slab.c index 3f4822938f46..7560eb00637c 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -1132,7 +1132,7 @@ static void __cpuinit cpuup_canceled(long cpu) if (nc) free_block(cachep, nc->entry, nc->avail, node); - if (!cpus_empty(*mask)) { + if (!cpumask_empty(mask)) { spin_unlock_irq(&l3->list_lock); goto free_array_cache; } -- GitLab From 6957177f5c3c0e51b9e90a1d7fadb3177a333949 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 17 Dec 2009 11:43:14 -0600 Subject: [PATCH 182/618] cpumask: use modern cpumask style in drivers/scsi/fcoe/fcoe.c Signed-off-by: Rusty Russell Cc: "James E.J. Bottomley" Cc: Robert Love Cc: Chris Leech Cc: linux-scsi@vger.kernel.org --- drivers/scsi/fcoe/fcoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index a30ffaa1222c..51c24b37c60a 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -1231,7 +1231,7 @@ int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, "CPU.\n"); spin_unlock_bh(&fps->fcoe_rx_list.lock); - cpu = first_cpu(cpu_online_map); + cpu = cpumask_first(cpu_online_mask); fps = &per_cpu(fcoe_percpu, cpu); spin_lock_bh(&fps->fcoe_rx_list.lock); if (!fps->thread) { -- GitLab From cc216b86e51e9ab22265ea9591769c9ee235e1e4 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 17 Dec 2009 11:43:24 -0600 Subject: [PATCH 183/618] cpumask: convert drivers/idle/i7300_idle.c to cpumask_var_t Fairly simple transformation: 1) cpumask_t -> cpumask_var_t and alloc_cpumask_var/free_cpumask_var (which are a NOOP unless CONFIG_CPUMASK_OFFSTACK=y). 2) cpu_set -> cpumask_set_cpu 3) cpus_weight -> cpumask_weight 4) cpu_clear -> cpumask_clear_cpu Signed-off-by: Rusty Russell To: Andy Henroid --- drivers/idle/i7300_idle.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c index 1f20a042a4f5..dd253002cd50 100644 --- a/drivers/idle/i7300_idle.c +++ b/drivers/idle/i7300_idle.c @@ -81,7 +81,7 @@ static u8 i7300_idle_thrtctl_saved; static u8 i7300_idle_thrtlow_saved; static u32 i7300_idle_mc_saved; -static cpumask_t idle_cpumask; +static cpumask_var_t idle_cpumask; static ktime_t start_ktime; static unsigned long avg_idle_us; @@ -459,9 +459,9 @@ static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val, spin_lock_irqsave(&i7300_idle_lock, flags); if (val == IDLE_START) { - cpu_set(smp_processor_id(), idle_cpumask); + cpumask_set_cpu(smp_processor_id(), idle_cpumask); - if (cpus_weight(idle_cpumask) != num_online_cpus()) + if (cpumask_weight(idle_cpumask) != num_online_cpus()) goto end; now_ktime = ktime_get(); @@ -478,8 +478,8 @@ static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val, i7300_idle_ioat_start(); } else if (val == IDLE_END) { - cpu_clear(smp_processor_id(), idle_cpumask); - if (cpus_weight(idle_cpumask) == (num_online_cpus() - 1)) { + cpumask_clear_cpu(smp_processor_id(), idle_cpumask); + if (cpumask_weight(idle_cpumask) == (num_online_cpus() - 1)) { /* First CPU coming out of idle */ u64 idle_duration_us; @@ -553,7 +553,6 @@ struct debugfs_file_info { static int __init i7300_idle_init(void) { spin_lock_init(&i7300_idle_lock); - cpus_clear(idle_cpumask); total_us = 0; if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload)) @@ -565,6 +564,9 @@ static int __init i7300_idle_init(void) if (i7300_idle_ioat_init()) return -ENODEV; + if (!zalloc_cpumask_var(&idle_cpumask, GFP_KERNEL)) + return -ENOMEM; + debugfs_dir = debugfs_create_dir("i7300_idle", NULL); if (debugfs_dir) { int i = 0; @@ -589,6 +591,7 @@ static int __init i7300_idle_init(void) static void __exit i7300_idle_exit(void) { idle_notifier_unregister(&i7300_idle_nb); + free_cpumask_var(idle_cpumask); if (debugfs_dir) { int i = 0; -- GitLab From 62ac12795095dc959649c66ace78708e7ac52477 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 17 Dec 2009 11:43:26 -0600 Subject: [PATCH 184/618] cpumask: avoid dereferencing struct cpumask struct cpumask will be undefined soon with CONFIG_CPUMASK_OFFSTACK=y, to avoid them being declared on the stack. cpumask_bits() does what we want here (of course, this code is crap). Signed-off-by: Rusty Russell To: Thomas Gleixner --- kernel/time/timer_list.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c index 28265636b6c2..bdfb8dd1050c 100644 --- a/kernel/time/timer_list.c +++ b/kernel/time/timer_list.c @@ -237,10 +237,10 @@ static void timer_list_show_tickdevices(struct seq_file *m) #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST print_tickdevice(m, tick_get_broadcast_device(), -1); SEQ_printf(m, "tick_broadcast_mask: %08lx\n", - tick_get_broadcast_mask()->bits[0]); + cpumask_bits(tick_get_broadcast_mask())[0]); #ifdef CONFIG_TICK_ONESHOT SEQ_printf(m, "tick_broadcast_oneshot_mask: %08lx\n", - tick_get_broadcast_oneshot_mask()->bits[0]); + cpumask_bits(tick_get_broadcast_oneshot_mask())[0]); #endif SEQ_printf(m, "\n"); #endif -- GitLab From 4251417484a1775ba5cbfe38c67e6d5af9615de4 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 17 Dec 2009 11:43:29 -0600 Subject: [PATCH 185/618] cpumask: don't recommend set_cpus_allowed hack in Documentation/cpu-hotplug.txt Signed-off-by: Rusty Russell Cc: Gautham R Shenoy Cc: Ashok Raj --- Documentation/cpu-hotplug.txt | 49 ++++++++++++----------------------- 1 file changed, 17 insertions(+), 32 deletions(-) diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index 4d4a644b505e..a99d7031cdf9 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -315,41 +315,26 @@ A: The following are what is required for CPU hotplug infrastructure to work Q: I need to ensure that a particular cpu is not removed when there is some work specific to this cpu is in progress. -A: First switch the current thread context to preferred cpu +A: There are two ways. If your code can be run in interrupt context, use + smp_call_function_single(), otherwise use work_on_cpu(). Note that + work_on_cpu() is slow, and can fail due to out of memory: int my_func_on_cpu(int cpu) { - cpumask_t saved_mask, new_mask = CPU_MASK_NONE; - int curr_cpu, err = 0; - - saved_mask = current->cpus_allowed; - cpu_set(cpu, new_mask); - err = set_cpus_allowed(current, new_mask); - - if (err) - return err; - - /* - * If we got scheduled out just after the return from - * set_cpus_allowed() before running the work, this ensures - * we stay locked. - */ - curr_cpu = get_cpu(); - - if (curr_cpu != cpu) { - err = -EAGAIN; - goto ret; - } else { - /* - * Do work : But cant sleep, since get_cpu() disables preempt - */ - } - ret: - put_cpu(); - set_cpus_allowed(current, saved_mask); - return err; - } - + int err; + get_online_cpus(); + if (!cpu_online(cpu)) + err = -EINVAL; + else +#if NEEDS_BLOCKING + err = work_on_cpu(cpu, __my_func_on_cpu, NULL); +#else + smp_call_function_single(cpu, __my_func_on_cpu, &err, + true); +#endif + put_online_cpus(); + return err; + } Q: How do we determine how many CPUs are available for hotplug. A: There is no clear spec defined way from ACPI that can give us that -- GitLab From a4636818f8e0991f32d9528f39cf4f3d6a7d30a3 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 17 Dec 2009 11:43:29 -0600 Subject: [PATCH 186/618] cpumask: rename tsk_cpumask to tsk_cpus_allowed Noone uses this wrapper yet, and Ingo asked that it be kept consistent with current task_struct usage. (One user crept in via linux-next: fixed) Signed-off-by: Rusty Russell Cc: Tejun Heo --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 2 +- include/linux/sched.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index a9df9441a9a2..f125e5c551c0 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1136,7 +1136,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, if (!alloc_cpumask_var(&oldmask, GFP_KERNEL)) return -ENOMEM; - cpumask_copy(oldmask, tsk_cpumask(current)); + cpumask_copy(oldmask, tsk_cpus_allowed(current)); set_cpus_allowed_ptr(current, cpumask_of(pol->cpu)); if (smp_processor_id() != pol->cpu) { diff --git a/include/linux/sched.h b/include/linux/sched.h index 244c287a5ac1..4d7adb282bdd 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1555,7 +1555,7 @@ struct task_struct { }; /* Future-safe accessor for struct task_struct's cpus_allowed. */ -#define tsk_cpumask(tsk) (&(tsk)->cpus_allowed) +#define tsk_cpus_allowed(tsk) (&(tsk)->cpus_allowed) /* * Priority of a process goes from 0..MAX_PRIO-1, valid RT -- GitLab From 1b93b3c3e94be2605759735a89fc935ba5f58dcf Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Wed, 14 Oct 2009 18:12:16 +0800 Subject: [PATCH 187/618] MIPS: Add support for GZIP / BZIP2 / LZMA compressed kernel images This patch helps to generate smaller kernel images for linux-MIPS, Here is the effect when using lzma: $ ls -sh vmlinux 7.1M vmlinux $ ls -sh vmlinuz 1.5M vmlinuz Have tested the 32bit kernel on Qemu/Malta and 64bit kernel on FuLoong Mini PC. both of them work well. and also, tested by Alexander Clouter on an AR7 based Linksys WAG54Gv2, and by Manuel Lauss on an Alchemy board. This -v2 version incorporate the feedback from Ralf, and add the following changes: 1. add .ecoff, .bin, .erec format support 2. only enable it and the debug source code for the machines we tested 3. a dozen of fixups and cleanups and if you want to enable it for your board, please try to select SYS_SUPPORTS_ZBOOT for it, and if the board have an 16550 compatible uart, you can select SYS_SUPPORTS_ZBOOT_UART16550 directly. and then sending the relative patches to Ralf. Tested-by: Manuel Lauss Tested-by: Alexander Clouter Signed-off-by: Wu Zhangjin Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 14 +++ arch/mips/Makefile | 31 ++++- arch/mips/boot/compressed/Makefile | 100 +++++++++++++++++ arch/mips/boot/compressed/dbg.c | 37 ++++++ arch/mips/boot/compressed/decompress.c | 126 +++++++++++++++++++++ arch/mips/boot/compressed/dummy.c | 4 + arch/mips/boot/compressed/head.S | 56 +++++++++ arch/mips/boot/compressed/ld.script | 150 +++++++++++++++++++++++++ arch/mips/boot/compressed/uart-16550.c | 43 +++++++ 9 files changed, 558 insertions(+), 3 deletions(-) create mode 100644 arch/mips/boot/compressed/Makefile create mode 100644 arch/mips/boot/compressed/dbg.c create mode 100644 arch/mips/boot/compressed/decompress.c create mode 100644 arch/mips/boot/compressed/dummy.c create mode 100644 arch/mips/boot/compressed/head.S create mode 100644 arch/mips/boot/compressed/ld.script create mode 100644 arch/mips/boot/compressed/uart-16550.c diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index fd7620f025fa..f6f3b990d837 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -22,6 +22,7 @@ choice config MACH_ALCHEMY bool "Alchemy processor based machines" + select SYS_SUPPORTS_ZBOOT config AR7 bool "Texas Instruments AR7" @@ -36,6 +37,7 @@ config AR7 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_ZBOOT_UART16550 select GENERIC_GPIO select GCD select VLYNQ @@ -192,6 +194,7 @@ config LASAT config MACH_LOONGSON bool "Loongson family of machines" + select SYS_SUPPORTS_ZBOOT_UART16550 help This enables the support of Loongson family of machines. @@ -233,6 +236,7 @@ config MIPS_MALTA select SYS_SUPPORTS_MIPS_CMP select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_SMARTMIPS + select SYS_SUPPORTS_ZBOOT help This enables support for the MIPS Technologies Malta evaluation board. @@ -1294,6 +1298,16 @@ config CPU_CAVIUM_OCTEON endchoice +config SYS_SUPPORTS_ZBOOT + bool + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA + +config SYS_SUPPORTS_ZBOOT_UART16550 + bool + select SYS_SUPPORTS_ZBOOT + config CPU_LOONGSON2 bool select CPU_SUPPORTS_32BIT_KERNEL diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 77f5021218d3..ba04782c4b91 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -69,6 +69,7 @@ endif all-$(CONFIG_BOOT_ELF32) := $(vmlinux-32) all-$(CONFIG_BOOT_ELF64) := $(vmlinux-64) +all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz # # GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel @@ -331,7 +332,7 @@ load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000 core-$(CONFIG_MIPS_MALTA) += arch/mips/mti-malta/ cflags-$(CONFIG_MIPS_MALTA) += -I$(srctree)/arch/mips/include/asm/mach-malta load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 -all-$(CONFIG_MIPS_MALTA) := vmlinux.bin +all-$(CONFIG_MIPS_MALTA) := vmlinuz.bin # # MIPS SIM @@ -581,7 +582,7 @@ load-$(CONFIG_SNI_RM) += 0xffffffff80600000 else load-$(CONFIG_SNI_RM) += 0xffffffff80030000 endif -all-$(CONFIG_SNI_RM) := vmlinux.ecoff +all-$(CONFIG_SNI_RM) := vmlinuz.ecoff # # Common TXx9 @@ -699,9 +700,23 @@ vmlinux.64: vmlinux $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@ makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1) +makezboot =$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \ + VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $(1) all: $(all-y) +vmlinuz: vmlinux FORCE + +@$(call makezboot,$@) + +vmlinuz.bin: vmlinux + +@$(call makezboot,$@) + +vmlinuz.ecoff: vmlinux + +@$(call makezboot,$@) + +vmlinuz.srec: vmlinux + +@$(call makezboot,$@) + vmlinux.bin: $(vmlinux-32) +@$(call makeboot,$@) @@ -726,11 +741,13 @@ endif install: $(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE) + $(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE) $(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE) $(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE) archclean: @$(MAKE) $(clean)=arch/mips/boot + @$(MAKE) $(clean)=arch/mips/boot/compressed @$(MAKE) $(clean)=arch/mips/lasat define archhelp @@ -738,10 +755,18 @@ define archhelp echo ' vmlinux.ecoff - ECOFF boot image' echo ' vmlinux.bin - Raw binary boot image' echo ' vmlinux.srec - SREC boot image' + echo ' vmlinuz - Compressed boot(zboot) image' + echo ' vmlinuz.ecoff - ECOFF zboot image' + echo ' vmlinuz.bin - Raw binary zboot image' + echo ' vmlinuz.srec - SREC zboot image' echo echo ' These will be default as apropriate for a configured platform.' endef CLEAN_FILES += vmlinux.32 \ vmlinux.64 \ - vmlinux.ecoff + vmlinux.ecoff \ + vmlinuz \ + vmlinuz.ecoff \ + vmlinuz.bin \ + vmlinuz.srec diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile new file mode 100644 index 000000000000..e27f40bbd4e5 --- /dev/null +++ b/arch/mips/boot/compressed/Makefile @@ -0,0 +1,100 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. +# +# Adapted for MIPS Pete Popov, Dan Malek +# +# Copyright (C) 1994 by Linus Torvalds +# Adapted for PowerPC by Gary Thomas +# modified by Cort (cort@cs.nmt.edu) +# +# Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University +# Author: Wu Zhangjin +# + +# compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE +VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1) +VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536)))) +VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" ] && printf %x $$(($(VMLINUX_LOAD_ADDRESS) + $(VMLINUX_SIZE)))) + +# set the default size of the mallocing area for decompressing +BOOT_HEAP_SIZE := 0x400000 + +# Disable Function Tracer +KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//") + +KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \ + -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \ + +KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \ + -DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ ) \ + -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) + +obj-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o + +obj-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o + +OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S +$(obj)/vmlinux.bin: $(KBUILD_IMAGE) + $(call if_changed,objcopy) + +suffix_$(CONFIG_KERNEL_GZIP) = gz +suffix_$(CONFIG_KERNEL_BZIP2) = bz2 +suffix_$(CONFIG_KERNEL_LZMA) = lzma +tool_$(CONFIG_KERNEL_GZIP) = gzip +tool_$(CONFIG_KERNEL_BZIP2) = bzip2 +tool_$(CONFIG_KERNEL_LZMA) = lzma +$(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin + $(call if_changed,$(tool_y)) + +$(obj)/piggy.o: $(obj)/vmlinux.$(suffix_y) $(obj)/dummy.o + $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) \ + --add-section=.image=$< \ + --set-section-flags=.image=contents,alloc,load,readonly,data \ + $(obj)/dummy.o $@ + +LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T +vmlinuz: $(src)/ld.script $(obj-y) $(obj)/piggy.o + $(call if_changed,ld) + $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap $@ + +# +# Some DECstations need all possible sections of an ECOFF executable +# +ifdef CONFIG_MACH_DECSTATION + E2EFLAGS = -a +else + E2EFLAGS = +endif + +# elf2ecoff can only handle 32bit image + +ifdef CONFIG_32BIT + VMLINUZ = vmlinuz +else + VMLINUZ = vmlinuz.32 +endif + +vmlinuz.32: vmlinuz + $(Q)$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@ + +vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ) + $(Q)$(obj)/../elf2ecoff $(VMLINUZ) vmlinuz.ecoff $(E2EFLAGS) + +$(obj)/../elf2ecoff: $(src)/../elf2ecoff.c + $(Q)$(HOSTCC) -o $@ $^ + +drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options +strip-flags = $(addprefix --remove-section=,$(drop-sections)) + +OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary $(strip-flags) +vmlinuz.bin: vmlinuz + $(call if_changed,objcopy) + +OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec $(strip-flags) +vmlinuz.srec: vmlinuz + $(call if_changed,objcopy) + +clean: +clean-files += *.o \ + vmlinu* diff --git a/arch/mips/boot/compressed/dbg.c b/arch/mips/boot/compressed/dbg.c new file mode 100644 index 000000000000..ff4dc7a33a9f --- /dev/null +++ b/arch/mips/boot/compressed/dbg.c @@ -0,0 +1,37 @@ +/* + * MIPS-specific debug support for pre-boot environment + * + * NOTE: putc() is board specific, if your board have a 16550 compatible uart, + * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you + * need to implement your own putc(). + */ + +#include +#include + +void __attribute__ ((weak)) putc(char c) +{ +} + +void puts(const char *s) +{ + char c; + while ((c = *s++) != '\0') { + putc(c); + if (c == '\n') + putc('\r'); + } +} + +void puthex(unsigned long long val) +{ + + unsigned char buf[10]; + int i; + for (i = 7; i >= 0; i--) { + buf[i] = "0123456789ABCDEF"[val & 0x0F]; + val >>= 4; + } + buf[8] = '\0'; + puts(buf); +} diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c new file mode 100644 index 000000000000..67330c2f7318 --- /dev/null +++ b/arch/mips/boot/compressed/decompress.c @@ -0,0 +1,126 @@ +/* + * Misc. bootloader code for many machines. + * + * Copyright 2001 MontaVista Software Inc. + * Author: Matt Porter Derived from + * arch/ppc/boot/prep/misc.c + * + * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Author: Wu Zhangjin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +#include + +/* These two variables specify the free mem region + * that can be used for temporary malloc area + */ +unsigned long free_mem_ptr; +unsigned long free_mem_end_ptr; +char *zimage_start; + +/* The linker tells us where the image is. */ +extern unsigned char __image_begin, __image_end; +extern unsigned char __ramdisk_begin, __ramdisk_end; +unsigned long initrd_size; + +/* debug interfaces */ +extern void puts(const char *s); +extern void puthex(unsigned long long val); + +void error(char *x) +{ + puts("\n\n"); + puts(x); + puts("\n\n -- System halted"); + + while (1) + ; /* Halt */ +} + +/* activate the code for pre-boot environment */ +#define STATIC static + +#ifdef CONFIG_KERNEL_GZIP +void *memcpy(void *dest, const void *src, size_t n) +{ + int i; + const char *s = src; + char *d = dest; + + for (i = 0; i < n; i++) + d[i] = s[i]; + return dest; +} +#include "../../../../lib/decompress_inflate.c" +#endif + +#ifdef CONFIG_KERNEL_BZIP2 +void *memset(void *s, int c, size_t n) +{ + int i; + char *ss = s; + + for (i = 0; i < n; i++) + ss[i] = c; + return s; +} +#include "../../../../lib/decompress_bunzip2.c" +#endif + +#ifdef CONFIG_KERNEL_LZMA +#include "../../../../lib/decompress_unlzma.c" +#endif + +void decompress_kernel(unsigned long boot_heap_start) +{ + int zimage_size; + + /* + * We link ourself to an arbitrary low address. When we run, we + * relocate outself to that address. __image_beign points to + * the part of the image where the zImage is. -- Tom + */ + zimage_start = (char *)(unsigned long)(&__image_begin); + zimage_size = (unsigned long)(&__image_end) - + (unsigned long)(&__image_begin); + + /* + * The zImage and initrd will be between start and _end, so they've + * already been moved once. We're good to go now. -- Tom + */ + puts("zimage at: "); + puthex((unsigned long)zimage_start); + puts(" "); + puthex((unsigned long)(zimage_size + zimage_start)); + puts("\n"); + + if (initrd_size) { + puts("initrd at: "); + puthex((unsigned long)(&__ramdisk_begin)); + puts(" "); + puthex((unsigned long)(&__ramdisk_end)); + puts("\n"); + } + + /* this area are prepared for mallocing when decompressing */ + free_mem_ptr = boot_heap_start; + free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE; + + /* Display standard Linux/MIPS boot prompt for kernel args */ + puts("Uncompressing Linux at load address "); + puthex(VMLINUX_LOAD_ADDRESS_ULL); + puts("\n"); + /* Decompress the kernel with according algorithm */ + decompress(zimage_start, zimage_size, 0, 0, + (void *)VMLINUX_LOAD_ADDRESS_ULL, 0, error); + /* FIXME: is there a need to flush cache here? */ + puts("Now, booting the kernel...\n"); +} diff --git a/arch/mips/boot/compressed/dummy.c b/arch/mips/boot/compressed/dummy.c new file mode 100644 index 000000000000..31dbf45bf99c --- /dev/null +++ b/arch/mips/boot/compressed/dummy.c @@ -0,0 +1,4 @@ +int main(void) +{ + return 0; +} diff --git a/arch/mips/boot/compressed/head.S b/arch/mips/boot/compressed/head.S new file mode 100644 index 000000000000..4e65a8420bee --- /dev/null +++ b/arch/mips/boot/compressed/head.S @@ -0,0 +1,56 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995 Waldorf Electronics + * Written by Ralf Baechle and Andreas Busse + * Copyright (C) 1995 - 1999 Ralf Baechle + * Copyright (C) 1996 Paul M. Antoine + * Modified for DECStation and hence R3000 support by Paul M. Antoine + * Further modifications by David S. Miller and Harald Koerfgen + * Copyright (C) 1999 Silicon Graphics, Inc. + */ + +#include +#include + + .set noreorder + .cprestore + LEAF(start) +start: + /* Save boot rom start args */ + move s0, a0 + move s1, a1 + move s2, a2 + move s3, a3 + + /* Clear BSS */ + PTR_LA a0, _edata + PTR_LA a2, _end +1: sw zero, 0(a0) + bne a2, a0, 1b + addiu a0, a0, 4 + + PTR_LA a0, (.heap) /* heap address */ + PTR_LA sp, (.stack + 8192) /* stack address */ + + PTR_LA ra, 2f + PTR_LA k0, decompress_kernel + jr k0 + nop +2: + move a0, s0 + move a1, s1 + move a2, s2 + move a3, s3 + PTR_LI k0, KERNEL_ENTRY + jr k0 + nop +3: + b 3b + nop + END(start) + + .comm .heap,BOOT_HEAP_SIZE,4 + .comm .stack,4096*2,4 diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script new file mode 100644 index 000000000000..29e9f4c0d5d8 --- /dev/null +++ b/arch/mips/boot/compressed/ld.script @@ -0,0 +1,150 @@ +OUTPUT_ARCH(mips) +ENTRY(start) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + .init : { *(.init) } =0 + .text : + { + _ftext = . ; + *(.text) + *(.rodata) + *(.rodata1) + /* .gnu.warning sections are handled specially by elf32.em. */ + *(.gnu.warning) + } =0 + .kstrtab : { *(.kstrtab) } + + . = ALIGN(16); /* Exception table */ + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + __start___dbe_table = .; /* Exception table for data bus errors */ + __dbe_table : { *(__dbe_table) } + __stop___dbe_table = .; + + __start___ksymtab = .; /* Kernel symbol table */ + __ksymtab : { *(__ksymtab) } + __stop___ksymtab = .; + + _etext = .; + + . = ALIGN(8192); + .data.init_task : { *(.data.init_task) } + + /* Startup code */ + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(16); + __setup_start = .; + .setup.init : { *(.setup.init) } + __setup_end = .; + __initcall_start = .; + .initcall.init : { *(.initcall.init) } + __initcall_end = .; + . = ALIGN(4096); /* Align double page for init_task_union */ + __init_end = .; + + . = ALIGN(4096); + .data.page_aligned : { *(.data.idt) } + + . = ALIGN(32); + .data.cacheline_aligned : { *(.data.cacheline_aligned) } + + .fini : { *(.fini) } =0 + .reginfo : { *(.reginfo) } + /* Adjust the address for the data segment. We want to adjust up to + the same address within the page on the next page up. It would + be more correct to do this: + . = .; + The current expression does not correctly handle the case of a + text segment ending precisely at the end of a page; it causes the + data segment to skip a page. The above expression does not have + this problem, but it will currently (2/95) cause BFD to allocate + a single segment, combining both text and data, for this case. + This will prevent the text segment from being shared among + multiple executions of the program; I think that is more + important than losing a page of the virtual address space (note + that no actual memory is lost; the page which is skipped can not + be referenced). */ + . = .; + .data : + { + _fdata = . ; + *(.data) + + /* Put the compressed image here, so bss is on the end. */ + __image_begin = .; + *(.image) + __image_end = .; + /* Align the initial ramdisk image (INITRD) on page boundaries. */ + . = ALIGN(4096); + __ramdisk_begin = .; + *(.initrd) + __ramdisk_end = .; + . = ALIGN(4096); + + CONSTRUCTORS + } + .data1 : { *(.data1) } + _gp = . + 0x8000; + .lit8 : { *(.lit8) } + .lit4 : { *(.lit4) } + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + .got : { *(.got.plt) *(.got) } + .dynamic : { *(.dynamic) } + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata : { *(.sdata) } + . = ALIGN(4); + _edata = .; + PROVIDE (edata = .); + + __bss_start = .; + _fbss = .; + .sbss : { *(.sbss) *(.scommon) } + .bss : + { + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _end = . ; + PROVIDE (end = .); + } + + /* Sections to be discarded */ + /DISCARD/ : + { + *(.text.exit) + *(.data.exit) + *(.exitcall.exit) + } + + /* This is the MIPS specific mdebug section. */ + .mdebug : { *(.mdebug) } + /* These are needed for ELF backends which have not yet been + converted to the new style linker. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + /* DWARF debug sections. + Symbols in the .debug DWARF section are relative to the beginning of the + section so we begin .debug at 0. It's not clear yet what needs to happen + for the others. */ + .debug 0 : { *(.debug) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .line 0 : { *(.line) } + /* These must appear regardless of . */ + .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } + .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } + .comment : { *(.comment) } + .note : { *(.note) } +} diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c new file mode 100644 index 000000000000..c9caaf4fbf60 --- /dev/null +++ b/arch/mips/boot/compressed/uart-16550.c @@ -0,0 +1,43 @@ +/* + * 16550 compatible uart based serial debug support for zboot + */ + +#include +#include +#include + +#include + +#if defined(CONFIG_MACH_LOONGSON) || defined(CONFIG_MIPS_MALTA) +#define UART_BASE 0x1fd003f8 +#define PORT(offset) (CKSEG1ADDR(UART_BASE) + (offset)) +#endif + +#ifdef CONFIG_AR7 +#include +#define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset)) +#endif + +#ifndef PORT +#error please define the serial port address for your own machine +#endif + +static inline unsigned int serial_in(int offset) +{ + return *((char *)PORT(offset)); +} + +static inline void serial_out(int offset, int value) +{ + *((char *)PORT(offset)) = value; +} + +void putc(char c) +{ + int timeout = 1024; + + while (((serial_in(UART_LSR) & UART_LSR_THRE) == 0) && (timeout-- > 0)) + ; + + serial_out(UART_TX, c); +} -- GitLab From cb6edd45f04152d91d598c0aadadbb3ac673d07b Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Tue, 13 Oct 2009 22:37:01 +0300 Subject: [PATCH 188/618] MIPS: IP22: Remove an unused function Nobody is using the ARCS-specific prom_getcmdline(), so let's remove it. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/fw/arc/cmdline.c | 5 ----- arch/mips/include/asm/sgialib.h | 3 +-- 2 files changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/mips/fw/arc/cmdline.c b/arch/mips/fw/arc/cmdline.c index 4ca4eef934a5..5c8603c85f20 100644 --- a/arch/mips/fw/arc/cmdline.c +++ b/arch/mips/fw/arc/cmdline.c @@ -16,11 +16,6 @@ #undef DEBUG_CMDLINE -char * __init prom_getcmdline(void) -{ - return arcs_cmdline; -} - static char *ignored[] = { "ConsoleIn=", "ConsoleOut=", diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h index bfce5c786f1c..63741ca1e422 100644 --- a/arch/mips/include/asm/sgialib.h +++ b/arch/mips/include/asm/sgialib.h @@ -85,8 +85,7 @@ extern void prom_identify_arch(void); extern PCHAR ArcGetEnvironmentVariable(PCHAR name); extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value); -/* ARCS command line acquisition and parsing. */ -extern char *prom_getcmdline(void); +/* ARCS command line parsing. */ extern void prom_init_cmdline(void); /* Acquiring info about the current time, etc. */ -- GitLab From 7580c9c3938f45b0d889728d5533cb46b0322a85 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Tue, 13 Oct 2009 23:43:24 +0300 Subject: [PATCH 189/618] MIPS: Replace all usages of CL_SIZE by COMMAND_LINE_SIZE The MIPS-specific macro CL_SIZE is merely aliasing the macro COMMAND_LINE_SIZE. Other architectures use the latter; also, COMMAND_LINE_SIZE is documented in kernel-parameters.txt, so let's use it, and remove the alias. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/bcm47xx/prom.c | 10 +++++----- arch/mips/include/asm/bootinfo.h | 4 +--- arch/mips/kernel/setup.c | 4 ++-- arch/mips/lasat/prom.c | 4 ++-- arch/mips/mti-malta/malta-memory.c | 2 +- arch/mips/rb532/prom.c | 4 ++-- arch/mips/sibyte/common/cfe.c | 4 ++-- arch/mips/txx9/generic/setup.c | 4 ++-- 8 files changed, 17 insertions(+), 19 deletions(-) diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c index fb284c3b2cff..c51405e57921 100644 --- a/arch/mips/bcm47xx/prom.c +++ b/arch/mips/bcm47xx/prom.c @@ -100,11 +100,11 @@ static __init void prom_init_console(void) static __init void prom_init_cmdline(void) { - static char buf[CL_SIZE] __initdata; + static char buf[COMMAND_LINE_SIZE] __initdata; /* Get the kernel command line from CFE */ - if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) { - buf[CL_SIZE-1] = 0; + if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) { + buf[COMMAND_LINE_SIZE - 1] = 0; strcpy(arcs_cmdline, buf); } @@ -112,13 +112,13 @@ static __init void prom_init_cmdline(void) * as CFE is not available anymore later in the boot process. */ if ((strstr(arcs_cmdline, "console=")) == NULL) { /* Try to read the default serial port used by CFE */ - if ((cfe_getenv("BOOT_CONSOLE", buf, CL_SIZE) < 0) + if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0) || (strncmp("uart", buf, 4))) /* Default to uart0 */ strcpy(buf, "uart0"); /* Compute the new command line */ - snprintf(arcs_cmdline, CL_SIZE, "%s console=ttyS%c,115200", + snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200", arcs_cmdline, buf[4]); } } diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index f5dfaf6a1606..07d41157afb2 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -69,8 +69,6 @@ #define MACH_DEXXON_GDIUM2F10 5 #define MACH_LOONGSON_END 6 -#define CL_SIZE COMMAND_LINE_SIZE - extern char *system_type; const char *get_system_type(void); @@ -107,7 +105,7 @@ extern void free_init_pages(const char *what, /* * Initial kernel command line, usually setup by prom_init() */ -extern char arcs_cmdline[CL_SIZE]; +extern char arcs_cmdline[COMMAND_LINE_SIZE]; /* * Registers a0, a1, a3 and a4 as passed to the kernel entry by firmware diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 2b290d70083e..fd138c9b33ef 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -58,8 +58,8 @@ EXPORT_SYMBOL(mips_machtype); struct boot_mem_map boot_mem_map; -static char command_line[CL_SIZE]; - char arcs_cmdline[CL_SIZE]=CONFIG_CMDLINE; +static char command_line[COMMAND_LINE_SIZE]; + char arcs_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; /* * mips_io_port_base is the begin of the address space to which x86 style diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c index 6acc6cb85f0a..20fde19a5fbf 100644 --- a/arch/mips/lasat/prom.c +++ b/arch/mips/lasat/prom.c @@ -100,8 +100,8 @@ void __init prom_init(void) /* Get the command line */ if (argc > 0) { - strncpy(arcs_cmdline, argv[0], CL_SIZE-1); - arcs_cmdline[CL_SIZE-1] = '\0'; + strncpy(arcs_cmdline, argv[0], COMMAND_LINE_SIZE-1); + arcs_cmdline[COMMAND_LINE_SIZE-1] = '\0'; } /* Set the I/O base address */ diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c index 9035c64bc5ed..b27419c84919 100644 --- a/arch/mips/mti-malta/malta-memory.c +++ b/arch/mips/mti-malta/malta-memory.c @@ -55,7 +55,7 @@ static struct prom_pmemblock * __init prom_getmdesc(void) char *memsize_str; unsigned int memsize; char *ptr; - static char cmdline[CL_SIZE] __initdata; + static char cmdline[COMMAND_LINE_SIZE] __initdata; /* otherwise look in the environment */ memsize_str = prom_getenv("memsize"); diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c index ad5bd1097974..d7c26d00cfef 100644 --- a/arch/mips/rb532/prom.c +++ b/arch/mips/rb532/prom.c @@ -69,7 +69,7 @@ static inline unsigned long tag2ul(char *arg, const char *tag) void __init prom_setup_cmdline(void) { - static char cmd_line[CL_SIZE] __initdata; + static char cmd_line[COMMAND_LINE_SIZE] __initdata; char *cp, *board; int prom_argc; char **prom_argv, **prom_envp; @@ -115,7 +115,7 @@ void __init prom_setup_cmdline(void) strcpy(cp, arcs_cmdline); cp += strlen(arcs_cmdline); } - cmd_line[CL_SIZE-1] = '\0'; + cmd_line[COMMAND_LINE_SIZE - 1] = '\0'; strcpy(arcs_cmdline, cmd_line); } diff --git a/arch/mips/sibyte/common/cfe.c b/arch/mips/sibyte/common/cfe.c index eb5396cf81bb..6343011e9902 100644 --- a/arch/mips/sibyte/common/cfe.c +++ b/arch/mips/sibyte/common/cfe.c @@ -287,7 +287,7 @@ void __init prom_init(void) * boot console */ cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); - if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) { + if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, COMMAND_LINE_SIZE) < 0) { if (argc >= 0) { /* The loader should have set the command line */ /* too early for panic to do any good */ @@ -318,7 +318,7 @@ void __init prom_init(void) #endif /* CONFIG_BLK_DEV_INITRD */ /* Not sure this is needed, but it's the safe way. */ - arcs_cmdline[CL_SIZE-1] = 0; + arcs_cmdline[COMMAND_LINE_SIZE-1] = 0; prom_meminit(); diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index d66802edebb2..06e801c7e258 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -160,7 +160,7 @@ static void __init prom_init_cmdline(void) int argc; int *argv32; int i; /* Always ignore the "-c" at argv[0] */ - static char builtin[CL_SIZE] __initdata; + static char builtin[COMMAND_LINE_SIZE] __initdata; if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) { /* @@ -315,7 +315,7 @@ static inline void txx9_cache_fixup(void) static void __init preprocess_cmdline(void) { - static char cmdline[CL_SIZE] __initdata; + static char cmdline[COMMAND_LINE_SIZE] __initdata; char *s; strcpy(cmdline, arcs_cmdline); -- GitLab From 362e696428590f7d0a5d0971a2d04b0372a761b8 Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 26 Jun 2009 09:01:43 -0700 Subject: [PATCH 190/618] MIPS: Reorder operations in stackframe.h for better scheduling Reorder PT ops to avoid pipeline stalls. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/stackframe.h | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index db0fa7b5aeaf..dd7e220e087b 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -51,9 +51,6 @@ LONG_S v1, PT_ACX(sp) #else mfhi v1 - LONG_S v1, PT_HI(sp) - mflo v1 - LONG_S v1, PT_LO(sp) #endif #ifdef CONFIG_32BIT LONG_S $8, PT_R8(sp) @@ -62,10 +59,17 @@ LONG_S $10, PT_R10(sp) LONG_S $11, PT_R11(sp) LONG_S $12, PT_R12(sp) +#ifndef CONFIG_CPU_HAS_SMARTMIPS + LONG_S v1, PT_HI(sp) + mflo v1 +#endif LONG_S $13, PT_R13(sp) LONG_S $14, PT_R14(sp) LONG_S $15, PT_R15(sp) LONG_S $24, PT_R24(sp) +#ifndef CONFIG_CPU_HAS_SMARTMIPS + LONG_S v1, PT_LO(sp) +#endif .endm .macro SAVE_STATIC @@ -166,7 +170,6 @@ LONG_S $0, PT_R0(sp) mfc0 v1, CP0_STATUS LONG_S $2, PT_R2(sp) - LONG_S v1, PT_STATUS(sp) #ifdef CONFIG_MIPS_MT_SMTC /* * Ideally, these instructions would be shuffled in @@ -178,20 +181,21 @@ LONG_S v1, PT_TCSTATUS(sp) #endif /* CONFIG_MIPS_MT_SMTC */ LONG_S $4, PT_R4(sp) - mfc0 v1, CP0_CAUSE LONG_S $5, PT_R5(sp) - LONG_S v1, PT_CAUSE(sp) + LONG_S v1, PT_STATUS(sp) + mfc0 v1, CP0_CAUSE LONG_S $6, PT_R6(sp) - MFC0 v1, CP0_EPC LONG_S $7, PT_R7(sp) + LONG_S v1, PT_CAUSE(sp) + MFC0 v1, CP0_EPC #ifdef CONFIG_64BIT LONG_S $8, PT_R8(sp) LONG_S $9, PT_R9(sp) #endif - LONG_S v1, PT_EPC(sp) LONG_S $25, PT_R25(sp) LONG_S $28, PT_R28(sp) LONG_S $31, PT_R31(sp) + LONG_S v1, PT_EPC(sp) ori $28, sp, _THREAD_MASK xori $28, _THREAD_MASK #ifdef CONFIG_CPU_CAVIUM_OCTEON -- GitLab From 0f7e64a3941fef0a5735da5184f3ccc0d234b580 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 14 Oct 2009 12:04:37 -0700 Subject: [PATCH 191/618] MIPS: Octeon: Add platform device for MDIO buses. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/octeon-platform.c | 30 +++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index be711dd2d918..febfdd73309f 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -159,6 +159,36 @@ static int __init octeon_rng_device_init(void) } device_initcall(octeon_rng_device_init); +/* Octeon SMI/MDIO interface. */ +static int __init octeon_mdiobus_device_init(void) +{ + struct platform_device *pd; + int ret = 0; + + if (octeon_is_simulation()) + return 0; /* No mdio in the simulator. */ + + /* The bus number is the platform_device id. */ + pd = platform_device_alloc("mdio-octeon", 0); + if (!pd) { + ret = -ENOMEM; + goto out; + } + + ret = platform_device_add(pd); + if (ret) + goto fail; + + return ret; +fail: + platform_device_put(pd); + +out: + return ret; + +} +device_initcall(octeon_mdiobus_device_init); + MODULE_AUTHOR("David Daney "); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Platform driver for Octeon SOC"); -- GitLab From 25d967b72a92d72b6e0263a0337dfc940bd6c044 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 14 Oct 2009 12:04:38 -0700 Subject: [PATCH 192/618] NET: Add driver for Octeon MDIO buses. The Octeon SOC has two types of Ethernet ports, each type with its own driver. However, the PHYs for all the ports are controlled by a common MDIO bus. Because the mdio driver is not associated with a particular driver, but is instead a system level resource, we create s stand-alone driver for it. As for the driver, we put the register definitions in arch/mips/include/asm/octeon where most of the other Octeon register definitions live. This is a platform driver with the platform device for "mdio-octeon" being registered in the platform startup code. Signed-off-by: David Daney Acked-by: David S. Miller Signed-off-by: Ralf Baechle --- arch/mips/include/asm/octeon/cvmx-smix-defs.h | 178 +++++++++++++++++ drivers/net/phy/Kconfig | 11 ++ drivers/net/phy/Makefile | 1 + drivers/net/phy/mdio-octeon.c | 180 ++++++++++++++++++ 4 files changed, 370 insertions(+) create mode 100644 arch/mips/include/asm/octeon/cvmx-smix-defs.h create mode 100644 drivers/net/phy/mdio-octeon.c diff --git a/arch/mips/include/asm/octeon/cvmx-smix-defs.h b/arch/mips/include/asm/octeon/cvmx-smix-defs.h new file mode 100644 index 000000000000..9ae45fcbe3e3 --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-smix-defs.h @@ -0,0 +1,178 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_SMIX_DEFS_H__ +#define __CVMX_SMIX_DEFS_H__ + +#define CVMX_SMIX_CLK(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001818ull + (((offset) & 1) * 256)) +#define CVMX_SMIX_CMD(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001800ull + (((offset) & 1) * 256)) +#define CVMX_SMIX_EN(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001820ull + (((offset) & 1) * 256)) +#define CVMX_SMIX_RD_DAT(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001810ull + (((offset) & 1) * 256)) +#define CVMX_SMIX_WR_DAT(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001808ull + (((offset) & 1) * 256)) + +union cvmx_smix_clk { + uint64_t u64; + struct cvmx_smix_clk_s { + uint64_t reserved_25_63:39; + uint64_t mode:1; + uint64_t reserved_21_23:3; + uint64_t sample_hi:5; + uint64_t sample_mode:1; + uint64_t reserved_14_14:1; + uint64_t clk_idle:1; + uint64_t preamble:1; + uint64_t sample:4; + uint64_t phase:8; + } s; + struct cvmx_smix_clk_cn30xx { + uint64_t reserved_21_63:43; + uint64_t sample_hi:5; + uint64_t reserved_14_15:2; + uint64_t clk_idle:1; + uint64_t preamble:1; + uint64_t sample:4; + uint64_t phase:8; + } cn30xx; + struct cvmx_smix_clk_cn30xx cn31xx; + struct cvmx_smix_clk_cn30xx cn38xx; + struct cvmx_smix_clk_cn30xx cn38xxp2; + struct cvmx_smix_clk_cn50xx { + uint64_t reserved_25_63:39; + uint64_t mode:1; + uint64_t reserved_21_23:3; + uint64_t sample_hi:5; + uint64_t reserved_14_15:2; + uint64_t clk_idle:1; + uint64_t preamble:1; + uint64_t sample:4; + uint64_t phase:8; + } cn50xx; + struct cvmx_smix_clk_s cn52xx; + struct cvmx_smix_clk_cn50xx cn52xxp1; + struct cvmx_smix_clk_s cn56xx; + struct cvmx_smix_clk_cn50xx cn56xxp1; + struct cvmx_smix_clk_cn30xx cn58xx; + struct cvmx_smix_clk_cn30xx cn58xxp1; +}; + +union cvmx_smix_cmd { + uint64_t u64; + struct cvmx_smix_cmd_s { + uint64_t reserved_18_63:46; + uint64_t phy_op:2; + uint64_t reserved_13_15:3; + uint64_t phy_adr:5; + uint64_t reserved_5_7:3; + uint64_t reg_adr:5; + } s; + struct cvmx_smix_cmd_cn30xx { + uint64_t reserved_17_63:47; + uint64_t phy_op:1; + uint64_t reserved_13_15:3; + uint64_t phy_adr:5; + uint64_t reserved_5_7:3; + uint64_t reg_adr:5; + } cn30xx; + struct cvmx_smix_cmd_cn30xx cn31xx; + struct cvmx_smix_cmd_cn30xx cn38xx; + struct cvmx_smix_cmd_cn30xx cn38xxp2; + struct cvmx_smix_cmd_s cn50xx; + struct cvmx_smix_cmd_s cn52xx; + struct cvmx_smix_cmd_s cn52xxp1; + struct cvmx_smix_cmd_s cn56xx; + struct cvmx_smix_cmd_s cn56xxp1; + struct cvmx_smix_cmd_cn30xx cn58xx; + struct cvmx_smix_cmd_cn30xx cn58xxp1; +}; + +union cvmx_smix_en { + uint64_t u64; + struct cvmx_smix_en_s { + uint64_t reserved_1_63:63; + uint64_t en:1; + } s; + struct cvmx_smix_en_s cn30xx; + struct cvmx_smix_en_s cn31xx; + struct cvmx_smix_en_s cn38xx; + struct cvmx_smix_en_s cn38xxp2; + struct cvmx_smix_en_s cn50xx; + struct cvmx_smix_en_s cn52xx; + struct cvmx_smix_en_s cn52xxp1; + struct cvmx_smix_en_s cn56xx; + struct cvmx_smix_en_s cn56xxp1; + struct cvmx_smix_en_s cn58xx; + struct cvmx_smix_en_s cn58xxp1; +}; + +union cvmx_smix_rd_dat { + uint64_t u64; + struct cvmx_smix_rd_dat_s { + uint64_t reserved_18_63:46; + uint64_t pending:1; + uint64_t val:1; + uint64_t dat:16; + } s; + struct cvmx_smix_rd_dat_s cn30xx; + struct cvmx_smix_rd_dat_s cn31xx; + struct cvmx_smix_rd_dat_s cn38xx; + struct cvmx_smix_rd_dat_s cn38xxp2; + struct cvmx_smix_rd_dat_s cn50xx; + struct cvmx_smix_rd_dat_s cn52xx; + struct cvmx_smix_rd_dat_s cn52xxp1; + struct cvmx_smix_rd_dat_s cn56xx; + struct cvmx_smix_rd_dat_s cn56xxp1; + struct cvmx_smix_rd_dat_s cn58xx; + struct cvmx_smix_rd_dat_s cn58xxp1; +}; + +union cvmx_smix_wr_dat { + uint64_t u64; + struct cvmx_smix_wr_dat_s { + uint64_t reserved_18_63:46; + uint64_t pending:1; + uint64_t val:1; + uint64_t dat:16; + } s; + struct cvmx_smix_wr_dat_s cn30xx; + struct cvmx_smix_wr_dat_s cn31xx; + struct cvmx_smix_wr_dat_s cn38xx; + struct cvmx_smix_wr_dat_s cn38xxp2; + struct cvmx_smix_wr_dat_s cn50xx; + struct cvmx_smix_wr_dat_s cn52xx; + struct cvmx_smix_wr_dat_s cn52xxp1; + struct cvmx_smix_wr_dat_s cn56xx; + struct cvmx_smix_wr_dat_s cn56xxp1; + struct cvmx_smix_wr_dat_s cn58xx; + struct cvmx_smix_wr_dat_s cn58xxp1; +}; + +#endif diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index d5d8e1c5bc91..fc5938ba3d78 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -115,4 +115,15 @@ config MDIO_GPIO To compile this driver as a module, choose M here: the module will be called mdio-gpio. +config MDIO_OCTEON + tristate "Support for MDIO buses on Octeon SOCs" + depends on CPU_CAVIUM_OCTEON + default y + help + + This module provides a driver for the Octeon MDIO busses. + It is required by the Octeon Ethernet device drivers. + + If in doubt, say Y. + endif # PHYLIB diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index edfaac48cbd5..1342585af381 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o obj-$(CONFIG_NATIONAL_PHY) += national.o obj-$(CONFIG_STE10XP) += ste10Xp.o +obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c new file mode 100644 index 000000000000..61a4461cbda5 --- /dev/null +++ b/drivers/net/phy/mdio-octeon.c @@ -0,0 +1,180 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Cavium Networks + */ + +#include +#include +#include +#include + +#include +#include + +#define DRV_VERSION "1.0" +#define DRV_DESCRIPTION "Cavium Networks Octeon SMI/MDIO driver" + +struct octeon_mdiobus { + struct mii_bus *mii_bus; + int unit; + int phy_irq[PHY_MAX_ADDR]; +}; + +static int octeon_mdiobus_read(struct mii_bus *bus, int phy_id, int regnum) +{ + struct octeon_mdiobus *p = bus->priv; + union cvmx_smix_cmd smi_cmd; + union cvmx_smix_rd_dat smi_rd; + int timeout = 1000; + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = 1; /* MDIO_CLAUSE_22_READ */ + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = regnum; + cvmx_write_csr(CVMX_SMIX_CMD(p->unit), smi_cmd.u64); + + do { + /* + * Wait 1000 clocks so we don't saturate the RSL bus + * doing reads. + */ + cvmx_wait(1000); + smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(p->unit)); + } while (smi_rd.s.pending && --timeout); + + if (smi_rd.s.val) + return smi_rd.s.dat; + else + return -EIO; +} + +static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id, + int regnum, u16 val) +{ + struct octeon_mdiobus *p = bus->priv; + union cvmx_smix_cmd smi_cmd; + union cvmx_smix_wr_dat smi_wr; + int timeout = 1000; + + smi_wr.u64 = 0; + smi_wr.s.dat = val; + cvmx_write_csr(CVMX_SMIX_WR_DAT(p->unit), smi_wr.u64); + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_22_WRITE */ + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = regnum; + cvmx_write_csr(CVMX_SMIX_CMD(p->unit), smi_cmd.u64); + + do { + /* + * Wait 1000 clocks so we don't saturate the RSL bus + * doing reads. + */ + cvmx_wait(1000); + smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(p->unit)); + } while (smi_wr.s.pending && --timeout); + + if (timeout <= 0) + return -EIO; + + return 0; +} + +static int __init octeon_mdiobus_probe(struct platform_device *pdev) +{ + struct octeon_mdiobus *bus; + int i; + int err = -ENOENT; + + bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); + if (!bus) + return -ENOMEM; + + /* The platform_device id is our unit number. */ + bus->unit = pdev->id; + + bus->mii_bus = mdiobus_alloc(); + + if (!bus->mii_bus) + goto err; + + /* + * Standard Octeon evaluation boards don't support phy + * interrupts, we need to poll. + */ + for (i = 0; i < PHY_MAX_ADDR; i++) + bus->phy_irq[i] = PHY_POLL; + + bus->mii_bus->priv = bus; + bus->mii_bus->irq = bus->phy_irq; + bus->mii_bus->name = "mdio-octeon"; + snprintf(bus->mii_bus->id, MII_BUS_ID_SIZE, "%x", bus->unit); + bus->mii_bus->parent = &pdev->dev; + + bus->mii_bus->read = octeon_mdiobus_read; + bus->mii_bus->write = octeon_mdiobus_write; + + dev_set_drvdata(&pdev->dev, bus); + + err = mdiobus_register(bus->mii_bus); + if (err) + goto err_register; + + dev_info(&pdev->dev, "Version " DRV_VERSION "\n"); + + return 0; +err_register: + mdiobus_free(bus->mii_bus); + +err: + devm_kfree(&pdev->dev, bus); + return err; +} + +static int __exit octeon_mdiobus_remove(struct platform_device *pdev) +{ + struct octeon_mdiobus *bus; + + bus = dev_get_drvdata(&pdev->dev); + + mdiobus_unregister(bus->mii_bus); + mdiobus_free(bus->mii_bus); + return 0; +} + +static struct platform_driver octeon_mdiobus_driver = { + .driver = { + .name = "mdio-octeon", + .owner = THIS_MODULE, + }, + .probe = octeon_mdiobus_probe, + .remove = __exit_p(octeon_mdiobus_remove), +}; + +void octeon_mdiobus_force_mod_depencency(void) +{ + /* Let ethernet drivers force us to be loaded. */ +} +EXPORT_SYMBOL(octeon_mdiobus_force_mod_depencency); + +static int __init octeon_mdiobus_mod_init(void) +{ + return platform_driver_register(&octeon_mdiobus_driver); +} + +static void __exit octeon_mdiobus_mod_exit(void) +{ + platform_driver_unregister(&octeon_mdiobus_driver); +} + +module_init(octeon_mdiobus_mod_init); +module_exit(octeon_mdiobus_mod_exit); + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("David Daney"); +MODULE_LICENSE("GPL"); -- GitLab From 24479d9f4650faf09f6f18fb32251ff7d399cb75 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 14 Oct 2009 12:04:39 -0700 Subject: [PATCH 193/618] MIPS: Octeon: Add platform devices MGMT Ethernet ports. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/octeon-platform.c | 58 +++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index febfdd73309f..cfdb4c2ac5c3 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -189,6 +189,64 @@ static int __init octeon_mdiobus_device_init(void) } device_initcall(octeon_mdiobus_device_init); +/* Octeon mgmt port Ethernet interface. */ +static int __init octeon_mgmt_device_init(void) +{ + struct platform_device *pd; + int ret = 0; + int port, num_ports; + + struct resource mgmt_port_resource = { + .flags = IORESOURCE_IRQ, + .start = -1, + .end = -1 + }; + + if (!OCTEON_IS_MODEL(OCTEON_CN56XX) && !OCTEON_IS_MODEL(OCTEON_CN52XX)) + return 0; + + if (OCTEON_IS_MODEL(OCTEON_CN56XX)) + num_ports = 1; + else + num_ports = 2; + + for (port = 0; port < num_ports; port++) { + pd = platform_device_alloc("octeon_mgmt", port); + if (!pd) { + ret = -ENOMEM; + goto out; + } + switch (port) { + case 0: + mgmt_port_resource.start = OCTEON_IRQ_MII0; + break; + case 1: + mgmt_port_resource.start = OCTEON_IRQ_MII1; + break; + default: + BUG(); + } + mgmt_port_resource.end = mgmt_port_resource.start; + + ret = platform_device_add_resources(pd, &mgmt_port_resource, 1); + + if (ret) + goto fail; + + ret = platform_device_add(pd); + if (ret) + goto fail; + } + return ret; +fail: + platform_device_put(pd); + +out: + return ret; + +} +device_initcall(octeon_mgmt_device_init); + MODULE_AUTHOR("David Daney "); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Platform driver for Octeon SOC"); -- GitLab From a7187a2ffcdedf6d8fd13c4a1250874071892347 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 14 Oct 2009 12:04:40 -0700 Subject: [PATCH 194/618] MIPS: Octeon: Add register definitions for MGMT Ethernet driver. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/octeon/cvmx-agl-defs.h | 1194 +++++++++++++++++ arch/mips/include/asm/octeon/cvmx-mixx-defs.h | 248 ++++ 2 files changed, 1442 insertions(+) create mode 100644 arch/mips/include/asm/octeon/cvmx-agl-defs.h create mode 100644 arch/mips/include/asm/octeon/cvmx-mixx-defs.h diff --git a/arch/mips/include/asm/octeon/cvmx-agl-defs.h b/arch/mips/include/asm/octeon/cvmx-agl-defs.h new file mode 100644 index 000000000000..ec94b9ab7be1 --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-agl-defs.h @@ -0,0 +1,1194 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_AGL_DEFS_H__ +#define __CVMX_AGL_DEFS_H__ + +#define CVMX_AGL_GMX_BAD_REG \ + CVMX_ADD_IO_SEG(0x00011800E0000518ull) +#define CVMX_AGL_GMX_BIST \ + CVMX_ADD_IO_SEG(0x00011800E0000400ull) +#define CVMX_AGL_GMX_DRV_CTL \ + CVMX_ADD_IO_SEG(0x00011800E00007F0ull) +#define CVMX_AGL_GMX_INF_MODE \ + CVMX_ADD_IO_SEG(0x00011800E00007F8ull) +#define CVMX_AGL_GMX_PRTX_CFG(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000010ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM0(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000180ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM1(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000188ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM2(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000190ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM3(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000198ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM4(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00001A0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM5(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00001A8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM_EN(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000108ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000100ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_DECISION(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000040ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_FRM_CHK(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000020ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_FRM_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000018ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_FRM_MAX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000030ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_FRM_MIN(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000028ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_IFG(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000058ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_INT_EN(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000008ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_INT_REG(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000000ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_JABBER(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000038ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_PAUSE_DROP_TIME(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000068ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000050ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_OCTS(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000088ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_OCTS_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000098ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_OCTS_DMAC(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000A8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_OCTS_DRP(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000B8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000080ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS_BAD(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000C0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000090ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS_DMAC(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000A0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS_DRP(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000B0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_UDD_SKP(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000048ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RX_BP_DROPX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000420ull + (((offset) & 1) * 8)) +#define CVMX_AGL_GMX_RX_BP_OFFX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000460ull + (((offset) & 1) * 8)) +#define CVMX_AGL_GMX_RX_BP_ONX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000440ull + (((offset) & 1) * 8)) +#define CVMX_AGL_GMX_RX_PRT_INFO \ + CVMX_ADD_IO_SEG(0x00011800E00004E8ull) +#define CVMX_AGL_GMX_RX_TX_STATUS \ + CVMX_ADD_IO_SEG(0x00011800E00007E8ull) +#define CVMX_AGL_GMX_SMACX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000230ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_STAT_BP \ + CVMX_ADD_IO_SEG(0x00011800E0000520ull) +#define CVMX_AGL_GMX_TXX_APPEND(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000218ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000270ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_MIN_PKT(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000240ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_PAUSE_PKT_INTERVAL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000248ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_PAUSE_PKT_TIME(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000238ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_PAUSE_TOGO(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000258ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_PAUSE_ZERO(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000260ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_SOFT_PAUSE(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000250ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT0(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000280ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT1(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000288ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT2(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000290ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT3(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000298ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT4(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002A0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT5(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002A8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT6(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002B0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT7(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002B8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT8(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002C0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT9(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002C8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STATS_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000268ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_THRESH(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000210ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TX_BP \ + CVMX_ADD_IO_SEG(0x00011800E00004D0ull) +#define CVMX_AGL_GMX_TX_COL_ATTEMPT \ + CVMX_ADD_IO_SEG(0x00011800E0000498ull) +#define CVMX_AGL_GMX_TX_IFG \ + CVMX_ADD_IO_SEG(0x00011800E0000488ull) +#define CVMX_AGL_GMX_TX_INT_EN \ + CVMX_ADD_IO_SEG(0x00011800E0000508ull) +#define CVMX_AGL_GMX_TX_INT_REG \ + CVMX_ADD_IO_SEG(0x00011800E0000500ull) +#define CVMX_AGL_GMX_TX_JAM \ + CVMX_ADD_IO_SEG(0x00011800E0000490ull) +#define CVMX_AGL_GMX_TX_LFSR \ + CVMX_ADD_IO_SEG(0x00011800E00004F8ull) +#define CVMX_AGL_GMX_TX_OVR_BP \ + CVMX_ADD_IO_SEG(0x00011800E00004C8ull) +#define CVMX_AGL_GMX_TX_PAUSE_PKT_DMAC \ + CVMX_ADD_IO_SEG(0x00011800E00004A0ull) +#define CVMX_AGL_GMX_TX_PAUSE_PKT_TYPE \ + CVMX_ADD_IO_SEG(0x00011800E00004A8ull) + +union cvmx_agl_gmx_bad_reg { + uint64_t u64; + struct cvmx_agl_gmx_bad_reg_s { + uint64_t reserved_38_63:26; + uint64_t txpsh1:1; + uint64_t txpop1:1; + uint64_t ovrflw1:1; + uint64_t txpsh:1; + uint64_t txpop:1; + uint64_t ovrflw:1; + uint64_t reserved_27_31:5; + uint64_t statovr:1; + uint64_t reserved_23_25:3; + uint64_t loststat:1; + uint64_t reserved_4_21:18; + uint64_t out_ovr:2; + uint64_t reserved_0_1:2; + } s; + struct cvmx_agl_gmx_bad_reg_s cn52xx; + struct cvmx_agl_gmx_bad_reg_s cn52xxp1; + struct cvmx_agl_gmx_bad_reg_cn56xx { + uint64_t reserved_35_63:29; + uint64_t txpsh:1; + uint64_t txpop:1; + uint64_t ovrflw:1; + uint64_t reserved_27_31:5; + uint64_t statovr:1; + uint64_t reserved_23_25:3; + uint64_t loststat:1; + uint64_t reserved_3_21:19; + uint64_t out_ovr:1; + uint64_t reserved_0_1:2; + } cn56xx; + struct cvmx_agl_gmx_bad_reg_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_bist { + uint64_t u64; + struct cvmx_agl_gmx_bist_s { + uint64_t reserved_10_63:54; + uint64_t status:10; + } s; + struct cvmx_agl_gmx_bist_s cn52xx; + struct cvmx_agl_gmx_bist_s cn52xxp1; + struct cvmx_agl_gmx_bist_s cn56xx; + struct cvmx_agl_gmx_bist_s cn56xxp1; +}; + +union cvmx_agl_gmx_drv_ctl { + uint64_t u64; + struct cvmx_agl_gmx_drv_ctl_s { + uint64_t reserved_49_63:15; + uint64_t byp_en1:1; + uint64_t reserved_45_47:3; + uint64_t pctl1:5; + uint64_t reserved_37_39:3; + uint64_t nctl1:5; + uint64_t reserved_17_31:15; + uint64_t byp_en:1; + uint64_t reserved_13_15:3; + uint64_t pctl:5; + uint64_t reserved_5_7:3; + uint64_t nctl:5; + } s; + struct cvmx_agl_gmx_drv_ctl_s cn52xx; + struct cvmx_agl_gmx_drv_ctl_s cn52xxp1; + struct cvmx_agl_gmx_drv_ctl_cn56xx { + uint64_t reserved_17_63:47; + uint64_t byp_en:1; + uint64_t reserved_13_15:3; + uint64_t pctl:5; + uint64_t reserved_5_7:3; + uint64_t nctl:5; + } cn56xx; + struct cvmx_agl_gmx_drv_ctl_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_inf_mode { + uint64_t u64; + struct cvmx_agl_gmx_inf_mode_s { + uint64_t reserved_2_63:62; + uint64_t en:1; + uint64_t reserved_0_0:1; + } s; + struct cvmx_agl_gmx_inf_mode_s cn52xx; + struct cvmx_agl_gmx_inf_mode_s cn52xxp1; + struct cvmx_agl_gmx_inf_mode_s cn56xx; + struct cvmx_agl_gmx_inf_mode_s cn56xxp1; +}; + +union cvmx_agl_gmx_prtx_cfg { + uint64_t u64; + struct cvmx_agl_gmx_prtx_cfg_s { + uint64_t reserved_6_63:58; + uint64_t tx_en:1; + uint64_t rx_en:1; + uint64_t slottime:1; + uint64_t duplex:1; + uint64_t speed:1; + uint64_t en:1; + } s; + struct cvmx_agl_gmx_prtx_cfg_s cn52xx; + struct cvmx_agl_gmx_prtx_cfg_s cn52xxp1; + struct cvmx_agl_gmx_prtx_cfg_s cn56xx; + struct cvmx_agl_gmx_prtx_cfg_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam0 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam0_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam0_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam0_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam0_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam0_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam1 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam1_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam1_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam1_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam1_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam1_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam2 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam2_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam2_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam2_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam2_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam2_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam3 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam3_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam3_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam3_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam3_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam3_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam4 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam4_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam4_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam4_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam4_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam4_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam5 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam5_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam5_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam5_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam5_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam5_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam_en { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam_en_s { + uint64_t reserved_8_63:56; + uint64_t en:8; + } s; + struct cvmx_agl_gmx_rxx_adr_cam_en_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam_en_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam_en_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam_en_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_ctl_s { + uint64_t reserved_4_63:60; + uint64_t cam_mode:1; + uint64_t mcst:2; + uint64_t bcst:1; + } s; + struct cvmx_agl_gmx_rxx_adr_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_decision { + uint64_t u64; + struct cvmx_agl_gmx_rxx_decision_s { + uint64_t reserved_5_63:59; + uint64_t cnt:5; + } s; + struct cvmx_agl_gmx_rxx_decision_s cn52xx; + struct cvmx_agl_gmx_rxx_decision_s cn52xxp1; + struct cvmx_agl_gmx_rxx_decision_s cn56xx; + struct cvmx_agl_gmx_rxx_decision_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_frm_chk { + uint64_t u64; + struct cvmx_agl_gmx_rxx_frm_chk_s { + uint64_t reserved_9_63:55; + uint64_t skperr:1; + uint64_t rcverr:1; + uint64_t lenerr:1; + uint64_t alnerr:1; + uint64_t fcserr:1; + uint64_t jabber:1; + uint64_t maxerr:1; + uint64_t reserved_1_1:1; + uint64_t minerr:1; + } s; + struct cvmx_agl_gmx_rxx_frm_chk_s cn52xx; + struct cvmx_agl_gmx_rxx_frm_chk_s cn52xxp1; + struct cvmx_agl_gmx_rxx_frm_chk_s cn56xx; + struct cvmx_agl_gmx_rxx_frm_chk_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_frm_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_frm_ctl_s { + uint64_t reserved_10_63:54; + uint64_t pre_align:1; + uint64_t pad_len:1; + uint64_t vlan_len:1; + uint64_t pre_free:1; + uint64_t ctl_smac:1; + uint64_t ctl_mcst:1; + uint64_t ctl_bck:1; + uint64_t ctl_drp:1; + uint64_t pre_strp:1; + uint64_t pre_chk:1; + } s; + struct cvmx_agl_gmx_rxx_frm_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_frm_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_frm_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_frm_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_frm_max { + uint64_t u64; + struct cvmx_agl_gmx_rxx_frm_max_s { + uint64_t reserved_16_63:48; + uint64_t len:16; + } s; + struct cvmx_agl_gmx_rxx_frm_max_s cn52xx; + struct cvmx_agl_gmx_rxx_frm_max_s cn52xxp1; + struct cvmx_agl_gmx_rxx_frm_max_s cn56xx; + struct cvmx_agl_gmx_rxx_frm_max_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_frm_min { + uint64_t u64; + struct cvmx_agl_gmx_rxx_frm_min_s { + uint64_t reserved_16_63:48; + uint64_t len:16; + } s; + struct cvmx_agl_gmx_rxx_frm_min_s cn52xx; + struct cvmx_agl_gmx_rxx_frm_min_s cn52xxp1; + struct cvmx_agl_gmx_rxx_frm_min_s cn56xx; + struct cvmx_agl_gmx_rxx_frm_min_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_ifg { + uint64_t u64; + struct cvmx_agl_gmx_rxx_ifg_s { + uint64_t reserved_4_63:60; + uint64_t ifg:4; + } s; + struct cvmx_agl_gmx_rxx_ifg_s cn52xx; + struct cvmx_agl_gmx_rxx_ifg_s cn52xxp1; + struct cvmx_agl_gmx_rxx_ifg_s cn56xx; + struct cvmx_agl_gmx_rxx_ifg_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_int_en { + uint64_t u64; + struct cvmx_agl_gmx_rxx_int_en_s { + uint64_t reserved_20_63:44; + uint64_t pause_drp:1; + uint64_t reserved_16_18:3; + uint64_t ifgerr:1; + uint64_t coldet:1; + uint64_t falerr:1; + uint64_t rsverr:1; + uint64_t pcterr:1; + uint64_t ovrerr:1; + uint64_t reserved_9_9:1; + uint64_t skperr:1; + uint64_t rcverr:1; + uint64_t lenerr:1; + uint64_t alnerr:1; + uint64_t fcserr:1; + uint64_t jabber:1; + uint64_t maxerr:1; + uint64_t reserved_1_1:1; + uint64_t minerr:1; + } s; + struct cvmx_agl_gmx_rxx_int_en_s cn52xx; + struct cvmx_agl_gmx_rxx_int_en_s cn52xxp1; + struct cvmx_agl_gmx_rxx_int_en_s cn56xx; + struct cvmx_agl_gmx_rxx_int_en_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_int_reg { + uint64_t u64; + struct cvmx_agl_gmx_rxx_int_reg_s { + uint64_t reserved_20_63:44; + uint64_t pause_drp:1; + uint64_t reserved_16_18:3; + uint64_t ifgerr:1; + uint64_t coldet:1; + uint64_t falerr:1; + uint64_t rsverr:1; + uint64_t pcterr:1; + uint64_t ovrerr:1; + uint64_t reserved_9_9:1; + uint64_t skperr:1; + uint64_t rcverr:1; + uint64_t lenerr:1; + uint64_t alnerr:1; + uint64_t fcserr:1; + uint64_t jabber:1; + uint64_t maxerr:1; + uint64_t reserved_1_1:1; + uint64_t minerr:1; + } s; + struct cvmx_agl_gmx_rxx_int_reg_s cn52xx; + struct cvmx_agl_gmx_rxx_int_reg_s cn52xxp1; + struct cvmx_agl_gmx_rxx_int_reg_s cn56xx; + struct cvmx_agl_gmx_rxx_int_reg_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_jabber { + uint64_t u64; + struct cvmx_agl_gmx_rxx_jabber_s { + uint64_t reserved_16_63:48; + uint64_t cnt:16; + } s; + struct cvmx_agl_gmx_rxx_jabber_s cn52xx; + struct cvmx_agl_gmx_rxx_jabber_s cn52xxp1; + struct cvmx_agl_gmx_rxx_jabber_s cn56xx; + struct cvmx_agl_gmx_rxx_jabber_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_pause_drop_time { + uint64_t u64; + struct cvmx_agl_gmx_rxx_pause_drop_time_s { + uint64_t reserved_16_63:48; + uint64_t status:16; + } s; + struct cvmx_agl_gmx_rxx_pause_drop_time_s cn52xx; + struct cvmx_agl_gmx_rxx_pause_drop_time_s cn52xxp1; + struct cvmx_agl_gmx_rxx_pause_drop_time_s cn56xx; + struct cvmx_agl_gmx_rxx_pause_drop_time_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_ctl_s { + uint64_t reserved_1_63:63; + uint64_t rd_clr:1; + } s; + struct cvmx_agl_gmx_rxx_stats_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_octs { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_octs_s { + uint64_t reserved_48_63:16; + uint64_t cnt:48; + } s; + struct cvmx_agl_gmx_rxx_stats_octs_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_octs_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_octs_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_octs_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_octs_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s { + uint64_t reserved_48_63:16; + uint64_t cnt:48; + } s; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_octs_dmac { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s { + uint64_t reserved_48_63:16; + uint64_t cnt:48; + } s; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_octs_drp { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s { + uint64_t reserved_48_63:16; + uint64_t cnt:48; + } s; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts_bad { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts_dmac { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts_drp { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_udd_skp { + uint64_t u64; + struct cvmx_agl_gmx_rxx_udd_skp_s { + uint64_t reserved_9_63:55; + uint64_t fcssel:1; + uint64_t reserved_7_7:1; + uint64_t len:7; + } s; + struct cvmx_agl_gmx_rxx_udd_skp_s cn52xx; + struct cvmx_agl_gmx_rxx_udd_skp_s cn52xxp1; + struct cvmx_agl_gmx_rxx_udd_skp_s cn56xx; + struct cvmx_agl_gmx_rxx_udd_skp_s cn56xxp1; +}; + +union cvmx_agl_gmx_rx_bp_dropx { + uint64_t u64; + struct cvmx_agl_gmx_rx_bp_dropx_s { + uint64_t reserved_6_63:58; + uint64_t mark:6; + } s; + struct cvmx_agl_gmx_rx_bp_dropx_s cn52xx; + struct cvmx_agl_gmx_rx_bp_dropx_s cn52xxp1; + struct cvmx_agl_gmx_rx_bp_dropx_s cn56xx; + struct cvmx_agl_gmx_rx_bp_dropx_s cn56xxp1; +}; + +union cvmx_agl_gmx_rx_bp_offx { + uint64_t u64; + struct cvmx_agl_gmx_rx_bp_offx_s { + uint64_t reserved_6_63:58; + uint64_t mark:6; + } s; + struct cvmx_agl_gmx_rx_bp_offx_s cn52xx; + struct cvmx_agl_gmx_rx_bp_offx_s cn52xxp1; + struct cvmx_agl_gmx_rx_bp_offx_s cn56xx; + struct cvmx_agl_gmx_rx_bp_offx_s cn56xxp1; +}; + +union cvmx_agl_gmx_rx_bp_onx { + uint64_t u64; + struct cvmx_agl_gmx_rx_bp_onx_s { + uint64_t reserved_9_63:55; + uint64_t mark:9; + } s; + struct cvmx_agl_gmx_rx_bp_onx_s cn52xx; + struct cvmx_agl_gmx_rx_bp_onx_s cn52xxp1; + struct cvmx_agl_gmx_rx_bp_onx_s cn56xx; + struct cvmx_agl_gmx_rx_bp_onx_s cn56xxp1; +}; + +union cvmx_agl_gmx_rx_prt_info { + uint64_t u64; + struct cvmx_agl_gmx_rx_prt_info_s { + uint64_t reserved_18_63:46; + uint64_t drop:2; + uint64_t reserved_2_15:14; + uint64_t commit:2; + } s; + struct cvmx_agl_gmx_rx_prt_info_s cn52xx; + struct cvmx_agl_gmx_rx_prt_info_s cn52xxp1; + struct cvmx_agl_gmx_rx_prt_info_cn56xx { + uint64_t reserved_17_63:47; + uint64_t drop:1; + uint64_t reserved_1_15:15; + uint64_t commit:1; + } cn56xx; + struct cvmx_agl_gmx_rx_prt_info_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_rx_tx_status { + uint64_t u64; + struct cvmx_agl_gmx_rx_tx_status_s { + uint64_t reserved_6_63:58; + uint64_t tx:2; + uint64_t reserved_2_3:2; + uint64_t rx:2; + } s; + struct cvmx_agl_gmx_rx_tx_status_s cn52xx; + struct cvmx_agl_gmx_rx_tx_status_s cn52xxp1; + struct cvmx_agl_gmx_rx_tx_status_cn56xx { + uint64_t reserved_5_63:59; + uint64_t tx:1; + uint64_t reserved_1_3:3; + uint64_t rx:1; + } cn56xx; + struct cvmx_agl_gmx_rx_tx_status_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_smacx { + uint64_t u64; + struct cvmx_agl_gmx_smacx_s { + uint64_t reserved_48_63:16; + uint64_t smac:48; + } s; + struct cvmx_agl_gmx_smacx_s cn52xx; + struct cvmx_agl_gmx_smacx_s cn52xxp1; + struct cvmx_agl_gmx_smacx_s cn56xx; + struct cvmx_agl_gmx_smacx_s cn56xxp1; +}; + +union cvmx_agl_gmx_stat_bp { + uint64_t u64; + struct cvmx_agl_gmx_stat_bp_s { + uint64_t reserved_17_63:47; + uint64_t bp:1; + uint64_t cnt:16; + } s; + struct cvmx_agl_gmx_stat_bp_s cn52xx; + struct cvmx_agl_gmx_stat_bp_s cn52xxp1; + struct cvmx_agl_gmx_stat_bp_s cn56xx; + struct cvmx_agl_gmx_stat_bp_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_append { + uint64_t u64; + struct cvmx_agl_gmx_txx_append_s { + uint64_t reserved_4_63:60; + uint64_t force_fcs:1; + uint64_t fcs:1; + uint64_t pad:1; + uint64_t preamble:1; + } s; + struct cvmx_agl_gmx_txx_append_s cn52xx; + struct cvmx_agl_gmx_txx_append_s cn52xxp1; + struct cvmx_agl_gmx_txx_append_s cn56xx; + struct cvmx_agl_gmx_txx_append_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_ctl { + uint64_t u64; + struct cvmx_agl_gmx_txx_ctl_s { + uint64_t reserved_2_63:62; + uint64_t xsdef_en:1; + uint64_t xscol_en:1; + } s; + struct cvmx_agl_gmx_txx_ctl_s cn52xx; + struct cvmx_agl_gmx_txx_ctl_s cn52xxp1; + struct cvmx_agl_gmx_txx_ctl_s cn56xx; + struct cvmx_agl_gmx_txx_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_min_pkt { + uint64_t u64; + struct cvmx_agl_gmx_txx_min_pkt_s { + uint64_t reserved_8_63:56; + uint64_t min_size:8; + } s; + struct cvmx_agl_gmx_txx_min_pkt_s cn52xx; + struct cvmx_agl_gmx_txx_min_pkt_s cn52xxp1; + struct cvmx_agl_gmx_txx_min_pkt_s cn56xx; + struct cvmx_agl_gmx_txx_min_pkt_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_pause_pkt_interval { + uint64_t u64; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s { + uint64_t reserved_16_63:48; + uint64_t interval:16; + } s; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn52xx; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn52xxp1; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn56xx; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_pause_pkt_time { + uint64_t u64; + struct cvmx_agl_gmx_txx_pause_pkt_time_s { + uint64_t reserved_16_63:48; + uint64_t time:16; + } s; + struct cvmx_agl_gmx_txx_pause_pkt_time_s cn52xx; + struct cvmx_agl_gmx_txx_pause_pkt_time_s cn52xxp1; + struct cvmx_agl_gmx_txx_pause_pkt_time_s cn56xx; + struct cvmx_agl_gmx_txx_pause_pkt_time_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_pause_togo { + uint64_t u64; + struct cvmx_agl_gmx_txx_pause_togo_s { + uint64_t reserved_16_63:48; + uint64_t time:16; + } s; + struct cvmx_agl_gmx_txx_pause_togo_s cn52xx; + struct cvmx_agl_gmx_txx_pause_togo_s cn52xxp1; + struct cvmx_agl_gmx_txx_pause_togo_s cn56xx; + struct cvmx_agl_gmx_txx_pause_togo_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_pause_zero { + uint64_t u64; + struct cvmx_agl_gmx_txx_pause_zero_s { + uint64_t reserved_1_63:63; + uint64_t send:1; + } s; + struct cvmx_agl_gmx_txx_pause_zero_s cn52xx; + struct cvmx_agl_gmx_txx_pause_zero_s cn52xxp1; + struct cvmx_agl_gmx_txx_pause_zero_s cn56xx; + struct cvmx_agl_gmx_txx_pause_zero_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_soft_pause { + uint64_t u64; + struct cvmx_agl_gmx_txx_soft_pause_s { + uint64_t reserved_16_63:48; + uint64_t time:16; + } s; + struct cvmx_agl_gmx_txx_soft_pause_s cn52xx; + struct cvmx_agl_gmx_txx_soft_pause_s cn52xxp1; + struct cvmx_agl_gmx_txx_soft_pause_s cn56xx; + struct cvmx_agl_gmx_txx_soft_pause_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat0 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat0_s { + uint64_t xsdef:32; + uint64_t xscol:32; + } s; + struct cvmx_agl_gmx_txx_stat0_s cn52xx; + struct cvmx_agl_gmx_txx_stat0_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat0_s cn56xx; + struct cvmx_agl_gmx_txx_stat0_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat1 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat1_s { + uint64_t scol:32; + uint64_t mcol:32; + } s; + struct cvmx_agl_gmx_txx_stat1_s cn52xx; + struct cvmx_agl_gmx_txx_stat1_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat1_s cn56xx; + struct cvmx_agl_gmx_txx_stat1_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat2 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat2_s { + uint64_t reserved_48_63:16; + uint64_t octs:48; + } s; + struct cvmx_agl_gmx_txx_stat2_s cn52xx; + struct cvmx_agl_gmx_txx_stat2_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat2_s cn56xx; + struct cvmx_agl_gmx_txx_stat2_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat3 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat3_s { + uint64_t reserved_32_63:32; + uint64_t pkts:32; + } s; + struct cvmx_agl_gmx_txx_stat3_s cn52xx; + struct cvmx_agl_gmx_txx_stat3_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat3_s cn56xx; + struct cvmx_agl_gmx_txx_stat3_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat4 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat4_s { + uint64_t hist1:32; + uint64_t hist0:32; + } s; + struct cvmx_agl_gmx_txx_stat4_s cn52xx; + struct cvmx_agl_gmx_txx_stat4_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat4_s cn56xx; + struct cvmx_agl_gmx_txx_stat4_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat5 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat5_s { + uint64_t hist3:32; + uint64_t hist2:32; + } s; + struct cvmx_agl_gmx_txx_stat5_s cn52xx; + struct cvmx_agl_gmx_txx_stat5_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat5_s cn56xx; + struct cvmx_agl_gmx_txx_stat5_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat6 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat6_s { + uint64_t hist5:32; + uint64_t hist4:32; + } s; + struct cvmx_agl_gmx_txx_stat6_s cn52xx; + struct cvmx_agl_gmx_txx_stat6_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat6_s cn56xx; + struct cvmx_agl_gmx_txx_stat6_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat7 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat7_s { + uint64_t hist7:32; + uint64_t hist6:32; + } s; + struct cvmx_agl_gmx_txx_stat7_s cn52xx; + struct cvmx_agl_gmx_txx_stat7_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat7_s cn56xx; + struct cvmx_agl_gmx_txx_stat7_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat8 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat8_s { + uint64_t mcst:32; + uint64_t bcst:32; + } s; + struct cvmx_agl_gmx_txx_stat8_s cn52xx; + struct cvmx_agl_gmx_txx_stat8_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat8_s cn56xx; + struct cvmx_agl_gmx_txx_stat8_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat9 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat9_s { + uint64_t undflw:32; + uint64_t ctl:32; + } s; + struct cvmx_agl_gmx_txx_stat9_s cn52xx; + struct cvmx_agl_gmx_txx_stat9_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat9_s cn56xx; + struct cvmx_agl_gmx_txx_stat9_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stats_ctl { + uint64_t u64; + struct cvmx_agl_gmx_txx_stats_ctl_s { + uint64_t reserved_1_63:63; + uint64_t rd_clr:1; + } s; + struct cvmx_agl_gmx_txx_stats_ctl_s cn52xx; + struct cvmx_agl_gmx_txx_stats_ctl_s cn52xxp1; + struct cvmx_agl_gmx_txx_stats_ctl_s cn56xx; + struct cvmx_agl_gmx_txx_stats_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_thresh { + uint64_t u64; + struct cvmx_agl_gmx_txx_thresh_s { + uint64_t reserved_6_63:58; + uint64_t cnt:6; + } s; + struct cvmx_agl_gmx_txx_thresh_s cn52xx; + struct cvmx_agl_gmx_txx_thresh_s cn52xxp1; + struct cvmx_agl_gmx_txx_thresh_s cn56xx; + struct cvmx_agl_gmx_txx_thresh_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_bp { + uint64_t u64; + struct cvmx_agl_gmx_tx_bp_s { + uint64_t reserved_2_63:62; + uint64_t bp:2; + } s; + struct cvmx_agl_gmx_tx_bp_s cn52xx; + struct cvmx_agl_gmx_tx_bp_s cn52xxp1; + struct cvmx_agl_gmx_tx_bp_cn56xx { + uint64_t reserved_1_63:63; + uint64_t bp:1; + } cn56xx; + struct cvmx_agl_gmx_tx_bp_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_tx_col_attempt { + uint64_t u64; + struct cvmx_agl_gmx_tx_col_attempt_s { + uint64_t reserved_5_63:59; + uint64_t limit:5; + } s; + struct cvmx_agl_gmx_tx_col_attempt_s cn52xx; + struct cvmx_agl_gmx_tx_col_attempt_s cn52xxp1; + struct cvmx_agl_gmx_tx_col_attempt_s cn56xx; + struct cvmx_agl_gmx_tx_col_attempt_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_ifg { + uint64_t u64; + struct cvmx_agl_gmx_tx_ifg_s { + uint64_t reserved_8_63:56; + uint64_t ifg2:4; + uint64_t ifg1:4; + } s; + struct cvmx_agl_gmx_tx_ifg_s cn52xx; + struct cvmx_agl_gmx_tx_ifg_s cn52xxp1; + struct cvmx_agl_gmx_tx_ifg_s cn56xx; + struct cvmx_agl_gmx_tx_ifg_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_int_en { + uint64_t u64; + struct cvmx_agl_gmx_tx_int_en_s { + uint64_t reserved_18_63:46; + uint64_t late_col:2; + uint64_t reserved_14_15:2; + uint64_t xsdef:2; + uint64_t reserved_10_11:2; + uint64_t xscol:2; + uint64_t reserved_4_7:4; + uint64_t undflw:2; + uint64_t reserved_1_1:1; + uint64_t pko_nxa:1; + } s; + struct cvmx_agl_gmx_tx_int_en_s cn52xx; + struct cvmx_agl_gmx_tx_int_en_s cn52xxp1; + struct cvmx_agl_gmx_tx_int_en_cn56xx { + uint64_t reserved_17_63:47; + uint64_t late_col:1; + uint64_t reserved_13_15:3; + uint64_t xsdef:1; + uint64_t reserved_9_11:3; + uint64_t xscol:1; + uint64_t reserved_3_7:5; + uint64_t undflw:1; + uint64_t reserved_1_1:1; + uint64_t pko_nxa:1; + } cn56xx; + struct cvmx_agl_gmx_tx_int_en_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_tx_int_reg { + uint64_t u64; + struct cvmx_agl_gmx_tx_int_reg_s { + uint64_t reserved_18_63:46; + uint64_t late_col:2; + uint64_t reserved_14_15:2; + uint64_t xsdef:2; + uint64_t reserved_10_11:2; + uint64_t xscol:2; + uint64_t reserved_4_7:4; + uint64_t undflw:2; + uint64_t reserved_1_1:1; + uint64_t pko_nxa:1; + } s; + struct cvmx_agl_gmx_tx_int_reg_s cn52xx; + struct cvmx_agl_gmx_tx_int_reg_s cn52xxp1; + struct cvmx_agl_gmx_tx_int_reg_cn56xx { + uint64_t reserved_17_63:47; + uint64_t late_col:1; + uint64_t reserved_13_15:3; + uint64_t xsdef:1; + uint64_t reserved_9_11:3; + uint64_t xscol:1; + uint64_t reserved_3_7:5; + uint64_t undflw:1; + uint64_t reserved_1_1:1; + uint64_t pko_nxa:1; + } cn56xx; + struct cvmx_agl_gmx_tx_int_reg_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_tx_jam { + uint64_t u64; + struct cvmx_agl_gmx_tx_jam_s { + uint64_t reserved_8_63:56; + uint64_t jam:8; + } s; + struct cvmx_agl_gmx_tx_jam_s cn52xx; + struct cvmx_agl_gmx_tx_jam_s cn52xxp1; + struct cvmx_agl_gmx_tx_jam_s cn56xx; + struct cvmx_agl_gmx_tx_jam_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_lfsr { + uint64_t u64; + struct cvmx_agl_gmx_tx_lfsr_s { + uint64_t reserved_16_63:48; + uint64_t lfsr:16; + } s; + struct cvmx_agl_gmx_tx_lfsr_s cn52xx; + struct cvmx_agl_gmx_tx_lfsr_s cn52xxp1; + struct cvmx_agl_gmx_tx_lfsr_s cn56xx; + struct cvmx_agl_gmx_tx_lfsr_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_ovr_bp { + uint64_t u64; + struct cvmx_agl_gmx_tx_ovr_bp_s { + uint64_t reserved_10_63:54; + uint64_t en:2; + uint64_t reserved_6_7:2; + uint64_t bp:2; + uint64_t reserved_2_3:2; + uint64_t ign_full:2; + } s; + struct cvmx_agl_gmx_tx_ovr_bp_s cn52xx; + struct cvmx_agl_gmx_tx_ovr_bp_s cn52xxp1; + struct cvmx_agl_gmx_tx_ovr_bp_cn56xx { + uint64_t reserved_9_63:55; + uint64_t en:1; + uint64_t reserved_5_7:3; + uint64_t bp:1; + uint64_t reserved_1_3:3; + uint64_t ign_full:1; + } cn56xx; + struct cvmx_agl_gmx_tx_ovr_bp_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_tx_pause_pkt_dmac { + uint64_t u64; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s { + uint64_t reserved_48_63:16; + uint64_t dmac:48; + } s; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn52xx; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn52xxp1; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn56xx; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_pause_pkt_type { + uint64_t u64; + struct cvmx_agl_gmx_tx_pause_pkt_type_s { + uint64_t reserved_16_63:48; + uint64_t type:16; + } s; + struct cvmx_agl_gmx_tx_pause_pkt_type_s cn52xx; + struct cvmx_agl_gmx_tx_pause_pkt_type_s cn52xxp1; + struct cvmx_agl_gmx_tx_pause_pkt_type_s cn56xx; + struct cvmx_agl_gmx_tx_pause_pkt_type_s cn56xxp1; +}; + +#endif diff --git a/arch/mips/include/asm/octeon/cvmx-mixx-defs.h b/arch/mips/include/asm/octeon/cvmx-mixx-defs.h new file mode 100644 index 000000000000..dab6dca492f9 --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-mixx-defs.h @@ -0,0 +1,248 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_MIXX_DEFS_H__ +#define __CVMX_MIXX_DEFS_H__ + +#define CVMX_MIXX_BIST(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100078ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_CTL(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100020ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_INTENA(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100050ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_IRCNT(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100030ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_IRHWM(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100028ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_IRING1(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100010ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_IRING2(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100018ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ISR(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100048ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ORCNT(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100040ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ORHWM(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100038ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ORING1(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100000ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ORING2(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100008ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_REMCNT(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100058ull + (((offset) & 1) * 2048)) + +union cvmx_mixx_bist { + uint64_t u64; + struct cvmx_mixx_bist_s { + uint64_t reserved_4_63:60; + uint64_t mrqdat:1; + uint64_t ipfdat:1; + uint64_t irfdat:1; + uint64_t orfdat:1; + } s; + struct cvmx_mixx_bist_s cn52xx; + struct cvmx_mixx_bist_s cn52xxp1; + struct cvmx_mixx_bist_s cn56xx; + struct cvmx_mixx_bist_s cn56xxp1; +}; + +union cvmx_mixx_ctl { + uint64_t u64; + struct cvmx_mixx_ctl_s { + uint64_t reserved_8_63:56; + uint64_t crc_strip:1; + uint64_t busy:1; + uint64_t en:1; + uint64_t reset:1; + uint64_t lendian:1; + uint64_t nbtarb:1; + uint64_t mrq_hwm:2; + } s; + struct cvmx_mixx_ctl_s cn52xx; + struct cvmx_mixx_ctl_s cn52xxp1; + struct cvmx_mixx_ctl_s cn56xx; + struct cvmx_mixx_ctl_s cn56xxp1; +}; + +union cvmx_mixx_intena { + uint64_t u64; + struct cvmx_mixx_intena_s { + uint64_t reserved_7_63:57; + uint64_t orunena:1; + uint64_t irunena:1; + uint64_t data_drpena:1; + uint64_t ithena:1; + uint64_t othena:1; + uint64_t ivfena:1; + uint64_t ovfena:1; + } s; + struct cvmx_mixx_intena_s cn52xx; + struct cvmx_mixx_intena_s cn52xxp1; + struct cvmx_mixx_intena_s cn56xx; + struct cvmx_mixx_intena_s cn56xxp1; +}; + +union cvmx_mixx_ircnt { + uint64_t u64; + struct cvmx_mixx_ircnt_s { + uint64_t reserved_20_63:44; + uint64_t ircnt:20; + } s; + struct cvmx_mixx_ircnt_s cn52xx; + struct cvmx_mixx_ircnt_s cn52xxp1; + struct cvmx_mixx_ircnt_s cn56xx; + struct cvmx_mixx_ircnt_s cn56xxp1; +}; + +union cvmx_mixx_irhwm { + uint64_t u64; + struct cvmx_mixx_irhwm_s { + uint64_t reserved_40_63:24; + uint64_t ibplwm:20; + uint64_t irhwm:20; + } s; + struct cvmx_mixx_irhwm_s cn52xx; + struct cvmx_mixx_irhwm_s cn52xxp1; + struct cvmx_mixx_irhwm_s cn56xx; + struct cvmx_mixx_irhwm_s cn56xxp1; +}; + +union cvmx_mixx_iring1 { + uint64_t u64; + struct cvmx_mixx_iring1_s { + uint64_t reserved_60_63:4; + uint64_t isize:20; + uint64_t reserved_36_39:4; + uint64_t ibase:33; + uint64_t reserved_0_2:3; + } s; + struct cvmx_mixx_iring1_s cn52xx; + struct cvmx_mixx_iring1_s cn52xxp1; + struct cvmx_mixx_iring1_s cn56xx; + struct cvmx_mixx_iring1_s cn56xxp1; +}; + +union cvmx_mixx_iring2 { + uint64_t u64; + struct cvmx_mixx_iring2_s { + uint64_t reserved_52_63:12; + uint64_t itlptr:20; + uint64_t reserved_20_31:12; + uint64_t idbell:20; + } s; + struct cvmx_mixx_iring2_s cn52xx; + struct cvmx_mixx_iring2_s cn52xxp1; + struct cvmx_mixx_iring2_s cn56xx; + struct cvmx_mixx_iring2_s cn56xxp1; +}; + +union cvmx_mixx_isr { + uint64_t u64; + struct cvmx_mixx_isr_s { + uint64_t reserved_7_63:57; + uint64_t orun:1; + uint64_t irun:1; + uint64_t data_drp:1; + uint64_t irthresh:1; + uint64_t orthresh:1; + uint64_t idblovf:1; + uint64_t odblovf:1; + } s; + struct cvmx_mixx_isr_s cn52xx; + struct cvmx_mixx_isr_s cn52xxp1; + struct cvmx_mixx_isr_s cn56xx; + struct cvmx_mixx_isr_s cn56xxp1; +}; + +union cvmx_mixx_orcnt { + uint64_t u64; + struct cvmx_mixx_orcnt_s { + uint64_t reserved_20_63:44; + uint64_t orcnt:20; + } s; + struct cvmx_mixx_orcnt_s cn52xx; + struct cvmx_mixx_orcnt_s cn52xxp1; + struct cvmx_mixx_orcnt_s cn56xx; + struct cvmx_mixx_orcnt_s cn56xxp1; +}; + +union cvmx_mixx_orhwm { + uint64_t u64; + struct cvmx_mixx_orhwm_s { + uint64_t reserved_20_63:44; + uint64_t orhwm:20; + } s; + struct cvmx_mixx_orhwm_s cn52xx; + struct cvmx_mixx_orhwm_s cn52xxp1; + struct cvmx_mixx_orhwm_s cn56xx; + struct cvmx_mixx_orhwm_s cn56xxp1; +}; + +union cvmx_mixx_oring1 { + uint64_t u64; + struct cvmx_mixx_oring1_s { + uint64_t reserved_60_63:4; + uint64_t osize:20; + uint64_t reserved_36_39:4; + uint64_t obase:33; + uint64_t reserved_0_2:3; + } s; + struct cvmx_mixx_oring1_s cn52xx; + struct cvmx_mixx_oring1_s cn52xxp1; + struct cvmx_mixx_oring1_s cn56xx; + struct cvmx_mixx_oring1_s cn56xxp1; +}; + +union cvmx_mixx_oring2 { + uint64_t u64; + struct cvmx_mixx_oring2_s { + uint64_t reserved_52_63:12; + uint64_t otlptr:20; + uint64_t reserved_20_31:12; + uint64_t odbell:20; + } s; + struct cvmx_mixx_oring2_s cn52xx; + struct cvmx_mixx_oring2_s cn52xxp1; + struct cvmx_mixx_oring2_s cn56xx; + struct cvmx_mixx_oring2_s cn56xxp1; +}; + +union cvmx_mixx_remcnt { + uint64_t u64; + struct cvmx_mixx_remcnt_s { + uint64_t reserved_52_63:12; + uint64_t iremcnt:20; + uint64_t reserved_20_31:12; + uint64_t oremcnt:20; + } s; + struct cvmx_mixx_remcnt_s cn52xx; + struct cvmx_mixx_remcnt_s cn52xxp1; + struct cvmx_mixx_remcnt_s cn56xx; + struct cvmx_mixx_remcnt_s cn56xxp1; +}; + +#endif -- GitLab From d6aa60a10b2f5068e331ca2936b1e6c248ae37c1 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 14 Oct 2009 12:04:41 -0700 Subject: [PATCH 195/618] NET: Add Ethernet driver for Octeon MGMT devices. The Octeon MGMT Ethernet ports are present in some members of the Octeon SOC family (cn52XX and cn56XX have them). The mdio bus connected to the MGMT PHYs is shared with the main octeon-ethernet driver, we force it to be loaded first by calling octeon_mdiobus_force_mod_depencency. The platform devices for the MGMT Ethernet ports are added in arch/mips/cavium-octeon/octeon-platform.c, and the register definitions for the ports live in arch/mips/include/asm/octeon/ along with their ilk. Although it currently is the only driver in drivers/net/octeon, the directory was created looking forward to the day that octeon-ethernet will move there from its current home in drivers/staging. Signed-off-by: David Daney Acked-by: David S. Miller Signed-off-by: Ralf Baechle --- drivers/net/Kconfig | 2 + drivers/net/Makefile | 2 + drivers/net/octeon/Kconfig | 10 + drivers/net/octeon/Makefile | 2 + drivers/net/octeon/octeon_mgmt.c | 1176 ++++++++++++++++++++++++++++++ 5 files changed, 1192 insertions(+) create mode 100644 drivers/net/octeon/Kconfig create mode 100644 drivers/net/octeon/Makefile create mode 100644 drivers/net/octeon/octeon_mgmt.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a5be9ac6405c..e58a65391ad2 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1953,6 +1953,8 @@ config BCM63XX_ENET source "drivers/net/fs_enet/Kconfig" +source "drivers/net/octeon/Kconfig" + endif # NET_ETHERNET # diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 246323d7f161..ad1346dd9da9 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -285,3 +285,5 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o obj-$(CONFIG_SFC) += sfc/ obj-$(CONFIG_WIMAX) += wimax/ + +obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/ diff --git a/drivers/net/octeon/Kconfig b/drivers/net/octeon/Kconfig new file mode 100644 index 000000000000..1e56bbf3f5c0 --- /dev/null +++ b/drivers/net/octeon/Kconfig @@ -0,0 +1,10 @@ +config OCTEON_MGMT_ETHERNET + tristate "Octeon Management port ethernet driver (CN5XXX, CN6XXX)" + depends on CPU_CAVIUM_OCTEON + select PHYLIB + select MDIO_OCTEON + default y + help + This option enables the ethernet driver for the management + port on Cavium Networks' Octeon CN57XX, CN56XX, CN55XX, + CN54XX, CN52XX, and CN6XXX chips. diff --git a/drivers/net/octeon/Makefile b/drivers/net/octeon/Makefile new file mode 100644 index 000000000000..906edecacfd3 --- /dev/null +++ b/drivers/net/octeon/Makefile @@ -0,0 +1,2 @@ + +obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon_mgmt.o diff --git a/drivers/net/octeon/octeon_mgmt.c b/drivers/net/octeon/octeon_mgmt.c new file mode 100644 index 000000000000..050538bf155a --- /dev/null +++ b/drivers/net/octeon/octeon_mgmt.c @@ -0,0 +1,1176 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Cavium Networks + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define DRV_NAME "octeon_mgmt" +#define DRV_VERSION "2.0" +#define DRV_DESCRIPTION \ + "Cavium Networks Octeon MII (management) port Network Driver" + +#define OCTEON_MGMT_NAPI_WEIGHT 16 + +/* + * Ring sizes that are powers of two allow for more efficient modulo + * opertions. + */ +#define OCTEON_MGMT_RX_RING_SIZE 512 +#define OCTEON_MGMT_TX_RING_SIZE 128 + +/* Allow 8 bytes for vlan and FCS. */ +#define OCTEON_MGMT_RX_HEADROOM (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN) + +union mgmt_port_ring_entry { + u64 d64; + struct { + u64 reserved_62_63:2; + /* Length of the buffer/packet in bytes */ + u64 len:14; + /* For TX, signals that the packet should be timestamped */ + u64 tstamp:1; + /* The RX error code */ + u64 code:7; +#define RING_ENTRY_CODE_DONE 0xf +#define RING_ENTRY_CODE_MORE 0x10 + /* Physical address of the buffer */ + u64 addr:40; + } s; +}; + +struct octeon_mgmt { + struct net_device *netdev; + int port; + int irq; + u64 *tx_ring; + dma_addr_t tx_ring_handle; + unsigned int tx_next; + unsigned int tx_next_clean; + unsigned int tx_current_fill; + /* The tx_list lock also protects the ring related variables */ + struct sk_buff_head tx_list; + + /* RX variables only touched in napi_poll. No locking necessary. */ + u64 *rx_ring; + dma_addr_t rx_ring_handle; + unsigned int rx_next; + unsigned int rx_next_fill; + unsigned int rx_current_fill; + struct sk_buff_head rx_list; + + spinlock_t lock; + unsigned int last_duplex; + unsigned int last_link; + struct device *dev; + struct napi_struct napi; + struct tasklet_struct tx_clean_tasklet; + struct phy_device *phydev; +}; + +static void octeon_mgmt_set_rx_irq(struct octeon_mgmt *p, int enable) +{ + int port = p->port; + union cvmx_mixx_intena mix_intena; + unsigned long flags; + + spin_lock_irqsave(&p->lock, flags); + mix_intena.u64 = cvmx_read_csr(CVMX_MIXX_INTENA(port)); + mix_intena.s.ithena = enable ? 1 : 0; + cvmx_write_csr(CVMX_MIXX_INTENA(port), mix_intena.u64); + spin_unlock_irqrestore(&p->lock, flags); +} + +static void octeon_mgmt_set_tx_irq(struct octeon_mgmt *p, int enable) +{ + int port = p->port; + union cvmx_mixx_intena mix_intena; + unsigned long flags; + + spin_lock_irqsave(&p->lock, flags); + mix_intena.u64 = cvmx_read_csr(CVMX_MIXX_INTENA(port)); + mix_intena.s.othena = enable ? 1 : 0; + cvmx_write_csr(CVMX_MIXX_INTENA(port), mix_intena.u64); + spin_unlock_irqrestore(&p->lock, flags); +} + +static inline void octeon_mgmt_enable_rx_irq(struct octeon_mgmt *p) +{ + octeon_mgmt_set_rx_irq(p, 1); +} + +static inline void octeon_mgmt_disable_rx_irq(struct octeon_mgmt *p) +{ + octeon_mgmt_set_rx_irq(p, 0); +} + +static inline void octeon_mgmt_enable_tx_irq(struct octeon_mgmt *p) +{ + octeon_mgmt_set_tx_irq(p, 1); +} + +static inline void octeon_mgmt_disable_tx_irq(struct octeon_mgmt *p) +{ + octeon_mgmt_set_tx_irq(p, 0); +} + +static unsigned int ring_max_fill(unsigned int ring_size) +{ + return ring_size - 8; +} + +static unsigned int ring_size_to_bytes(unsigned int ring_size) +{ + return ring_size * sizeof(union mgmt_port_ring_entry); +} + +static void octeon_mgmt_rx_fill_ring(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + + while (p->rx_current_fill < ring_max_fill(OCTEON_MGMT_RX_RING_SIZE)) { + unsigned int size; + union mgmt_port_ring_entry re; + struct sk_buff *skb; + + /* CN56XX pass 1 needs 8 bytes of padding. */ + size = netdev->mtu + OCTEON_MGMT_RX_HEADROOM + 8 + NET_IP_ALIGN; + + skb = netdev_alloc_skb(netdev, size); + if (!skb) + break; + skb_reserve(skb, NET_IP_ALIGN); + __skb_queue_tail(&p->rx_list, skb); + + re.d64 = 0; + re.s.len = size; + re.s.addr = dma_map_single(p->dev, skb->data, + size, + DMA_FROM_DEVICE); + + /* Put it in the ring. */ + p->rx_ring[p->rx_next_fill] = re.d64; + dma_sync_single_for_device(p->dev, p->rx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + p->rx_next_fill = + (p->rx_next_fill + 1) % OCTEON_MGMT_RX_RING_SIZE; + p->rx_current_fill++; + /* Ring the bell. */ + cvmx_write_csr(CVMX_MIXX_IRING2(port), 1); + } +} + +static void octeon_mgmt_clean_tx_buffers(struct octeon_mgmt *p) +{ + int port = p->port; + union cvmx_mixx_orcnt mix_orcnt; + union mgmt_port_ring_entry re; + struct sk_buff *skb; + int cleaned = 0; + unsigned long flags; + + mix_orcnt.u64 = cvmx_read_csr(CVMX_MIXX_ORCNT(port)); + while (mix_orcnt.s.orcnt) { + dma_sync_single_for_cpu(p->dev, p->tx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + + spin_lock_irqsave(&p->tx_list.lock, flags); + + re.d64 = p->tx_ring[p->tx_next_clean]; + p->tx_next_clean = + (p->tx_next_clean + 1) % OCTEON_MGMT_TX_RING_SIZE; + skb = __skb_dequeue(&p->tx_list); + + mix_orcnt.u64 = 0; + mix_orcnt.s.orcnt = 1; + + /* Acknowledge to hardware that we have the buffer. */ + cvmx_write_csr(CVMX_MIXX_ORCNT(port), mix_orcnt.u64); + p->tx_current_fill--; + + spin_unlock_irqrestore(&p->tx_list.lock, flags); + + dma_unmap_single(p->dev, re.s.addr, re.s.len, + DMA_TO_DEVICE); + dev_kfree_skb_any(skb); + cleaned++; + + mix_orcnt.u64 = cvmx_read_csr(CVMX_MIXX_ORCNT(port)); + } + + if (cleaned && netif_queue_stopped(p->netdev)) + netif_wake_queue(p->netdev); +} + +static void octeon_mgmt_clean_tx_tasklet(unsigned long arg) +{ + struct octeon_mgmt *p = (struct octeon_mgmt *)arg; + octeon_mgmt_clean_tx_buffers(p); + octeon_mgmt_enable_tx_irq(p); +} + +static void octeon_mgmt_update_rx_stats(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + unsigned long flags; + u64 drop, bad; + + /* These reads also clear the count registers. */ + drop = cvmx_read_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_DRP(port)); + bad = cvmx_read_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_BAD(port)); + + if (drop || bad) { + /* Do an atomic update. */ + spin_lock_irqsave(&p->lock, flags); + netdev->stats.rx_errors += bad; + netdev->stats.rx_dropped += drop; + spin_unlock_irqrestore(&p->lock, flags); + } +} + +static void octeon_mgmt_update_tx_stats(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + unsigned long flags; + + union cvmx_agl_gmx_txx_stat0 s0; + union cvmx_agl_gmx_txx_stat1 s1; + + /* These reads also clear the count registers. */ + s0.u64 = cvmx_read_csr(CVMX_AGL_GMX_TXX_STAT0(port)); + s1.u64 = cvmx_read_csr(CVMX_AGL_GMX_TXX_STAT1(port)); + + if (s0.s.xsdef || s0.s.xscol || s1.s.scol || s1.s.mcol) { + /* Do an atomic update. */ + spin_lock_irqsave(&p->lock, flags); + netdev->stats.tx_errors += s0.s.xsdef + s0.s.xscol; + netdev->stats.collisions += s1.s.scol + s1.s.mcol; + spin_unlock_irqrestore(&p->lock, flags); + } +} + +/* + * Dequeue a receive skb and its corresponding ring entry. The ring + * entry is returned, *pskb is updated to point to the skb. + */ +static u64 octeon_mgmt_dequeue_rx_buffer(struct octeon_mgmt *p, + struct sk_buff **pskb) +{ + union mgmt_port_ring_entry re; + + dma_sync_single_for_cpu(p->dev, p->rx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + + re.d64 = p->rx_ring[p->rx_next]; + p->rx_next = (p->rx_next + 1) % OCTEON_MGMT_RX_RING_SIZE; + p->rx_current_fill--; + *pskb = __skb_dequeue(&p->rx_list); + + dma_unmap_single(p->dev, re.s.addr, + ETH_FRAME_LEN + OCTEON_MGMT_RX_HEADROOM, + DMA_FROM_DEVICE); + + return re.d64; +} + + +static int octeon_mgmt_receive_one(struct octeon_mgmt *p) +{ + int port = p->port; + struct net_device *netdev = p->netdev; + union cvmx_mixx_ircnt mix_ircnt; + union mgmt_port_ring_entry re; + struct sk_buff *skb; + struct sk_buff *skb2; + struct sk_buff *skb_new; + union mgmt_port_ring_entry re2; + int rc = 1; + + + re.d64 = octeon_mgmt_dequeue_rx_buffer(p, &skb); + if (likely(re.s.code == RING_ENTRY_CODE_DONE)) { + /* A good packet, send it up. */ + skb_put(skb, re.s.len); +good: + skb->protocol = eth_type_trans(skb, netdev); + netdev->stats.rx_packets++; + netdev->stats.rx_bytes += skb->len; + netdev->last_rx = jiffies; + netif_receive_skb(skb); + rc = 0; + } else if (re.s.code == RING_ENTRY_CODE_MORE) { + /* + * Packet split across skbs. This can happen if we + * increase the MTU. Buffers that are already in the + * rx ring can then end up being too small. As the rx + * ring is refilled, buffers sized for the new MTU + * will be used and we should go back to the normal + * non-split case. + */ + skb_put(skb, re.s.len); + do { + re2.d64 = octeon_mgmt_dequeue_rx_buffer(p, &skb2); + if (re2.s.code != RING_ENTRY_CODE_MORE + && re2.s.code != RING_ENTRY_CODE_DONE) + goto split_error; + skb_put(skb2, re2.s.len); + skb_new = skb_copy_expand(skb, 0, skb2->len, + GFP_ATOMIC); + if (!skb_new) + goto split_error; + if (skb_copy_bits(skb2, 0, skb_tail_pointer(skb_new), + skb2->len)) + goto split_error; + skb_put(skb_new, skb2->len); + dev_kfree_skb_any(skb); + dev_kfree_skb_any(skb2); + skb = skb_new; + } while (re2.s.code == RING_ENTRY_CODE_MORE); + goto good; + } else { + /* Some other error, discard it. */ + dev_kfree_skb_any(skb); + /* + * Error statistics are accumulated in + * octeon_mgmt_update_rx_stats. + */ + } + goto done; +split_error: + /* Discard the whole mess. */ + dev_kfree_skb_any(skb); + dev_kfree_skb_any(skb2); + while (re2.s.code == RING_ENTRY_CODE_MORE) { + re2.d64 = octeon_mgmt_dequeue_rx_buffer(p, &skb2); + dev_kfree_skb_any(skb2); + } + netdev->stats.rx_errors++; + +done: + /* Tell the hardware we processed a packet. */ + mix_ircnt.u64 = 0; + mix_ircnt.s.ircnt = 1; + cvmx_write_csr(CVMX_MIXX_IRCNT(port), mix_ircnt.u64); + return rc; + +} + +static int octeon_mgmt_receive_packets(struct octeon_mgmt *p, int budget) +{ + int port = p->port; + unsigned int work_done = 0; + union cvmx_mixx_ircnt mix_ircnt; + int rc; + + + mix_ircnt.u64 = cvmx_read_csr(CVMX_MIXX_IRCNT(port)); + while (work_done < budget && mix_ircnt.s.ircnt) { + + rc = octeon_mgmt_receive_one(p); + if (!rc) + work_done++; + + /* Check for more packets. */ + mix_ircnt.u64 = cvmx_read_csr(CVMX_MIXX_IRCNT(port)); + } + + octeon_mgmt_rx_fill_ring(p->netdev); + + return work_done; +} + +static int octeon_mgmt_napi_poll(struct napi_struct *napi, int budget) +{ + struct octeon_mgmt *p = container_of(napi, struct octeon_mgmt, napi); + struct net_device *netdev = p->netdev; + unsigned int work_done = 0; + + work_done = octeon_mgmt_receive_packets(p, budget); + + if (work_done < budget) { + /* We stopped because no more packets were available. */ + napi_complete(napi); + octeon_mgmt_enable_rx_irq(p); + } + octeon_mgmt_update_rx_stats(netdev); + + return work_done; +} + +/* Reset the hardware to clean state. */ +static void octeon_mgmt_reset_hw(struct octeon_mgmt *p) +{ + union cvmx_mixx_ctl mix_ctl; + union cvmx_mixx_bist mix_bist; + union cvmx_agl_gmx_bist agl_gmx_bist; + + mix_ctl.u64 = 0; + cvmx_write_csr(CVMX_MIXX_CTL(p->port), mix_ctl.u64); + do { + mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(p->port)); + } while (mix_ctl.s.busy); + mix_ctl.s.reset = 1; + cvmx_write_csr(CVMX_MIXX_CTL(p->port), mix_ctl.u64); + cvmx_read_csr(CVMX_MIXX_CTL(p->port)); + cvmx_wait(64); + + mix_bist.u64 = cvmx_read_csr(CVMX_MIXX_BIST(p->port)); + if (mix_bist.u64) + dev_warn(p->dev, "MIX failed BIST (0x%016llx)\n", + (unsigned long long)mix_bist.u64); + + agl_gmx_bist.u64 = cvmx_read_csr(CVMX_AGL_GMX_BIST); + if (agl_gmx_bist.u64) + dev_warn(p->dev, "AGL failed BIST (0x%016llx)\n", + (unsigned long long)agl_gmx_bist.u64); +} + +struct octeon_mgmt_cam_state { + u64 cam[6]; + u64 cam_mask; + int cam_index; +}; + +static void octeon_mgmt_cam_state_add(struct octeon_mgmt_cam_state *cs, + unsigned char *addr) +{ + int i; + + for (i = 0; i < 6; i++) + cs->cam[i] |= (u64)addr[i] << (8 * (cs->cam_index)); + cs->cam_mask |= (1ULL << cs->cam_index); + cs->cam_index++; +} + +static void octeon_mgmt_set_rx_filtering(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + int i; + union cvmx_agl_gmx_rxx_adr_ctl adr_ctl; + union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx; + unsigned long flags; + unsigned int prev_packet_enable; + unsigned int cam_mode = 1; /* 1 - Accept on CAM match */ + unsigned int multicast_mode = 1; /* 1 - Reject all multicast. */ + struct octeon_mgmt_cam_state cam_state; + struct dev_addr_list *list; + struct list_head *pos; + int available_cam_entries; + + memset(&cam_state, 0, sizeof(cam_state)); + + if ((netdev->flags & IFF_PROMISC) || netdev->dev_addrs.count > 7) { + cam_mode = 0; + available_cam_entries = 8; + } else { + /* + * One CAM entry for the primary address, leaves seven + * for the secondary addresses. + */ + available_cam_entries = 7 - netdev->dev_addrs.count; + } + + if (netdev->flags & IFF_MULTICAST) { + if (cam_mode == 0 || (netdev->flags & IFF_ALLMULTI) + || netdev->mc_count > available_cam_entries) + multicast_mode = 2; /* 1 - Accept all multicast. */ + else + multicast_mode = 0; /* 0 - Use CAM. */ + } + + if (cam_mode == 1) { + /* Add primary address. */ + octeon_mgmt_cam_state_add(&cam_state, netdev->dev_addr); + list_for_each(pos, &netdev->dev_addrs.list) { + struct netdev_hw_addr *hw_addr; + hw_addr = list_entry(pos, struct netdev_hw_addr, list); + octeon_mgmt_cam_state_add(&cam_state, hw_addr->addr); + list = list->next; + } + } + if (multicast_mode == 0) { + i = netdev->mc_count; + list = netdev->mc_list; + while (i--) { + octeon_mgmt_cam_state_add(&cam_state, list->da_addr); + list = list->next; + } + } + + + spin_lock_irqsave(&p->lock, flags); + + /* Disable packet I/O. */ + agl_gmx_prtx.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); + prev_packet_enable = agl_gmx_prtx.s.en; + agl_gmx_prtx.s.en = 0; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64); + + + adr_ctl.u64 = 0; + adr_ctl.s.cam_mode = cam_mode; + adr_ctl.s.mcst = multicast_mode; + adr_ctl.s.bcst = 1; /* Allow broadcast */ + + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port), adr_ctl.u64); + + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM0(port), cam_state.cam[0]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM1(port), cam_state.cam[1]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM2(port), cam_state.cam[2]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM3(port), cam_state.cam[3]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM4(port), cam_state.cam[4]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM5(port), cam_state.cam[5]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), cam_state.cam_mask); + + /* Restore packet I/O. */ + agl_gmx_prtx.s.en = prev_packet_enable; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64); + + spin_unlock_irqrestore(&p->lock, flags); +} + +static int octeon_mgmt_set_mac_address(struct net_device *netdev, void *addr) +{ + struct sockaddr *sa = addr; + + if (!is_valid_ether_addr(sa->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, sa->sa_data, ETH_ALEN); + + octeon_mgmt_set_rx_filtering(netdev); + + return 0; +} + +static int octeon_mgmt_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + int size_without_fcs = new_mtu + OCTEON_MGMT_RX_HEADROOM; + + /* + * Limit the MTU to make sure the ethernet packets are between + * 64 bytes and 16383 bytes. + */ + if (size_without_fcs < 64 || size_without_fcs > 16383) { + dev_warn(p->dev, "MTU must be between %d and %d.\n", + 64 - OCTEON_MGMT_RX_HEADROOM, + 16383 - OCTEON_MGMT_RX_HEADROOM); + return -EINVAL; + } + + netdev->mtu = new_mtu; + + cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_MAX(port), size_without_fcs); + cvmx_write_csr(CVMX_AGL_GMX_RXX_JABBER(port), + (size_without_fcs + 7) & 0xfff8); + + return 0; +} + +static irqreturn_t octeon_mgmt_interrupt(int cpl, void *dev_id) +{ + struct net_device *netdev = dev_id; + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + union cvmx_mixx_isr mixx_isr; + + mixx_isr.u64 = cvmx_read_csr(CVMX_MIXX_ISR(port)); + + /* Clear any pending interrupts */ + cvmx_write_csr(CVMX_MIXX_ISR(port), + cvmx_read_csr(CVMX_MIXX_ISR(port))); + cvmx_read_csr(CVMX_MIXX_ISR(port)); + + if (mixx_isr.s.irthresh) { + octeon_mgmt_disable_rx_irq(p); + napi_schedule(&p->napi); + } + if (mixx_isr.s.orthresh) { + octeon_mgmt_disable_tx_irq(p); + tasklet_schedule(&p->tx_clean_tasklet); + } + + return IRQ_HANDLED; +} + +static int octeon_mgmt_ioctl(struct net_device *netdev, + struct ifreq *rq, int cmd) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + if (!netif_running(netdev)) + return -EINVAL; + + if (!p->phydev) + return -EINVAL; + + return phy_mii_ioctl(p->phydev, if_mii(rq), cmd); +} + +static void octeon_mgmt_adjust_link(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + union cvmx_agl_gmx_prtx_cfg prtx_cfg; + unsigned long flags; + int link_changed = 0; + + spin_lock_irqsave(&p->lock, flags); + if (p->phydev->link) { + if (!p->last_link) + link_changed = 1; + if (p->last_duplex != p->phydev->duplex) { + p->last_duplex = p->phydev->duplex; + prtx_cfg.u64 = + cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); + prtx_cfg.s.duplex = p->phydev->duplex; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), + prtx_cfg.u64); + } + } else { + if (p->last_link) + link_changed = -1; + } + p->last_link = p->phydev->link; + spin_unlock_irqrestore(&p->lock, flags); + + if (link_changed != 0) { + if (link_changed > 0) { + netif_carrier_on(netdev); + pr_info("%s: Link is up - %d/%s\n", netdev->name, + p->phydev->speed, + DUPLEX_FULL == p->phydev->duplex ? + "Full" : "Half"); + } else { + netif_carrier_off(netdev); + pr_info("%s: Link is down\n", netdev->name); + } + } +} + +static int octeon_mgmt_init_phy(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + char phy_id[20]; + + if (octeon_is_simulation()) { + /* No PHYs in the simulator. */ + netif_carrier_on(netdev); + return 0; + } + + snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", p->port); + + p->phydev = phy_connect(netdev, phy_id, octeon_mgmt_adjust_link, 0, + PHY_INTERFACE_MODE_MII); + + if (IS_ERR(p->phydev)) { + p->phydev = NULL; + return -1; + } + + phy_start_aneg(p->phydev); + + return 0; +} + +static int octeon_mgmt_open(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + union cvmx_mixx_ctl mix_ctl; + union cvmx_agl_gmx_inf_mode agl_gmx_inf_mode; + union cvmx_mixx_oring1 oring1; + union cvmx_mixx_iring1 iring1; + union cvmx_agl_gmx_prtx_cfg prtx_cfg; + union cvmx_agl_gmx_rxx_frm_ctl rxx_frm_ctl; + union cvmx_mixx_irhwm mix_irhwm; + union cvmx_mixx_orhwm mix_orhwm; + union cvmx_mixx_intena mix_intena; + struct sockaddr sa; + + /* Allocate ring buffers. */ + p->tx_ring = kzalloc(ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + GFP_KERNEL); + if (!p->tx_ring) + return -ENOMEM; + p->tx_ring_handle = + dma_map_single(p->dev, p->tx_ring, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + p->tx_next = 0; + p->tx_next_clean = 0; + p->tx_current_fill = 0; + + + p->rx_ring = kzalloc(ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + GFP_KERNEL); + if (!p->rx_ring) + goto err_nomem; + p->rx_ring_handle = + dma_map_single(p->dev, p->rx_ring, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + + p->rx_next = 0; + p->rx_next_fill = 0; + p->rx_current_fill = 0; + + octeon_mgmt_reset_hw(p); + + mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port)); + + /* Bring it out of reset if needed. */ + if (mix_ctl.s.reset) { + mix_ctl.s.reset = 0; + cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64); + do { + mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port)); + } while (mix_ctl.s.reset); + } + + agl_gmx_inf_mode.u64 = 0; + agl_gmx_inf_mode.s.en = 1; + cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64); + + oring1.u64 = 0; + oring1.s.obase = p->tx_ring_handle >> 3; + oring1.s.osize = OCTEON_MGMT_TX_RING_SIZE; + cvmx_write_csr(CVMX_MIXX_ORING1(port), oring1.u64); + + iring1.u64 = 0; + iring1.s.ibase = p->rx_ring_handle >> 3; + iring1.s.isize = OCTEON_MGMT_RX_RING_SIZE; + cvmx_write_csr(CVMX_MIXX_IRING1(port), iring1.u64); + + /* Disable packet I/O. */ + prtx_cfg.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); + prtx_cfg.s.en = 0; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), prtx_cfg.u64); + + memcpy(sa.sa_data, netdev->dev_addr, ETH_ALEN); + octeon_mgmt_set_mac_address(netdev, &sa); + + octeon_mgmt_change_mtu(netdev, netdev->mtu); + + /* + * Enable the port HW. Packets are not allowed until + * cvmx_mgmt_port_enable() is called. + */ + mix_ctl.u64 = 0; + mix_ctl.s.crc_strip = 1; /* Strip the ending CRC */ + mix_ctl.s.en = 1; /* Enable the port */ + mix_ctl.s.nbtarb = 0; /* Arbitration mode */ + /* MII CB-request FIFO programmable high watermark */ + mix_ctl.s.mrq_hwm = 1; + cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64); + + if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) + || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + /* + * Force compensation values, as they are not + * determined properly by HW + */ + union cvmx_agl_gmx_drv_ctl drv_ctl; + + drv_ctl.u64 = cvmx_read_csr(CVMX_AGL_GMX_DRV_CTL); + if (port) { + drv_ctl.s.byp_en1 = 1; + drv_ctl.s.nctl1 = 6; + drv_ctl.s.pctl1 = 6; + } else { + drv_ctl.s.byp_en = 1; + drv_ctl.s.nctl = 6; + drv_ctl.s.pctl = 6; + } + cvmx_write_csr(CVMX_AGL_GMX_DRV_CTL, drv_ctl.u64); + } + + octeon_mgmt_rx_fill_ring(netdev); + + /* Clear statistics. */ + /* Clear on read. */ + cvmx_write_csr(CVMX_AGL_GMX_RXX_STATS_CTL(port), 1); + cvmx_write_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_DRP(port), 0); + cvmx_write_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_BAD(port), 0); + + cvmx_write_csr(CVMX_AGL_GMX_TXX_STATS_CTL(port), 1); + cvmx_write_csr(CVMX_AGL_GMX_TXX_STAT0(port), 0); + cvmx_write_csr(CVMX_AGL_GMX_TXX_STAT1(port), 0); + + /* Clear any pending interrupts */ + cvmx_write_csr(CVMX_MIXX_ISR(port), cvmx_read_csr(CVMX_MIXX_ISR(port))); + + if (request_irq(p->irq, octeon_mgmt_interrupt, 0, netdev->name, + netdev)) { + dev_err(p->dev, "request_irq(%d) failed.\n", p->irq); + goto err_noirq; + } + + /* Interrupt every single RX packet */ + mix_irhwm.u64 = 0; + mix_irhwm.s.irhwm = 0; + cvmx_write_csr(CVMX_MIXX_IRHWM(port), mix_irhwm.u64); + + /* Interrupt when we have 5 or more packets to clean. */ + mix_orhwm.u64 = 0; + mix_orhwm.s.orhwm = 5; + cvmx_write_csr(CVMX_MIXX_ORHWM(port), mix_orhwm.u64); + + /* Enable receive and transmit interrupts */ + mix_intena.u64 = 0; + mix_intena.s.ithena = 1; + mix_intena.s.othena = 1; + cvmx_write_csr(CVMX_MIXX_INTENA(port), mix_intena.u64); + + + /* Enable packet I/O. */ + + rxx_frm_ctl.u64 = 0; + rxx_frm_ctl.s.pre_align = 1; + /* + * When set, disables the length check for non-min sized pkts + * with padding in the client data. + */ + rxx_frm_ctl.s.pad_len = 1; + /* When set, disables the length check for VLAN pkts */ + rxx_frm_ctl.s.vlan_len = 1; + /* When set, PREAMBLE checking is less strict */ + rxx_frm_ctl.s.pre_free = 1; + /* Control Pause Frames can match station SMAC */ + rxx_frm_ctl.s.ctl_smac = 0; + /* Control Pause Frames can match globally assign Multicast address */ + rxx_frm_ctl.s.ctl_mcst = 1; + /* Forward pause information to TX block */ + rxx_frm_ctl.s.ctl_bck = 1; + /* Drop Control Pause Frames */ + rxx_frm_ctl.s.ctl_drp = 1; + /* Strip off the preamble */ + rxx_frm_ctl.s.pre_strp = 1; + /* + * This port is configured to send PREAMBLE+SFD to begin every + * frame. GMX checks that the PREAMBLE is sent correctly. + */ + rxx_frm_ctl.s.pre_chk = 1; + cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_CTL(port), rxx_frm_ctl.u64); + + /* Enable the AGL block */ + agl_gmx_inf_mode.u64 = 0; + agl_gmx_inf_mode.s.en = 1; + cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64); + + /* Configure the port duplex and enables */ + prtx_cfg.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); + prtx_cfg.s.tx_en = 1; + prtx_cfg.s.rx_en = 1; + prtx_cfg.s.en = 1; + p->last_duplex = 1; + prtx_cfg.s.duplex = p->last_duplex; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), prtx_cfg.u64); + + p->last_link = 0; + netif_carrier_off(netdev); + + if (octeon_mgmt_init_phy(netdev)) { + dev_err(p->dev, "Cannot initialize PHY.\n"); + goto err_noirq; + } + + netif_wake_queue(netdev); + napi_enable(&p->napi); + + return 0; +err_noirq: + octeon_mgmt_reset_hw(p); + dma_unmap_single(p->dev, p->rx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + kfree(p->rx_ring); +err_nomem: + dma_unmap_single(p->dev, p->tx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + kfree(p->tx_ring); + return -ENOMEM; +} + +static int octeon_mgmt_stop(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + napi_disable(&p->napi); + netif_stop_queue(netdev); + + if (p->phydev) + phy_disconnect(p->phydev); + + netif_carrier_off(netdev); + + octeon_mgmt_reset_hw(p); + + + free_irq(p->irq, netdev); + + /* dma_unmap is a nop on Octeon, so just free everything. */ + skb_queue_purge(&p->tx_list); + skb_queue_purge(&p->rx_list); + + dma_unmap_single(p->dev, p->rx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + kfree(p->rx_ring); + + dma_unmap_single(p->dev, p->tx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + kfree(p->tx_ring); + + + return 0; +} + +static int octeon_mgmt_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + union mgmt_port_ring_entry re; + unsigned long flags; + + re.d64 = 0; + re.s.len = skb->len; + re.s.addr = dma_map_single(p->dev, skb->data, + skb->len, + DMA_TO_DEVICE); + + spin_lock_irqsave(&p->tx_list.lock, flags); + + if (unlikely(p->tx_current_fill >= + ring_max_fill(OCTEON_MGMT_TX_RING_SIZE))) { + spin_unlock_irqrestore(&p->tx_list.lock, flags); + + dma_unmap_single(p->dev, re.s.addr, re.s.len, + DMA_TO_DEVICE); + + netif_stop_queue(netdev); + return NETDEV_TX_BUSY; + } + + __skb_queue_tail(&p->tx_list, skb); + + /* Put it in the ring. */ + p->tx_ring[p->tx_next] = re.d64; + p->tx_next = (p->tx_next + 1) % OCTEON_MGMT_TX_RING_SIZE; + p->tx_current_fill++; + + spin_unlock_irqrestore(&p->tx_list.lock, flags); + + dma_sync_single_for_device(p->dev, p->tx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + + netdev->stats.tx_packets++; + netdev->stats.tx_bytes += skb->len; + + /* Ring the bell. */ + cvmx_write_csr(CVMX_MIXX_ORING2(port), 1); + + netdev->trans_start = jiffies; + octeon_mgmt_clean_tx_buffers(p); + octeon_mgmt_update_tx_stats(netdev); + return NETDEV_TX_OK; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void octeon_mgmt_poll_controller(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + octeon_mgmt_receive_packets(p, 16); + octeon_mgmt_update_rx_stats(netdev); + return; +} +#endif + +static void octeon_mgmt_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *info) +{ + strncpy(info->driver, DRV_NAME, sizeof(info->driver)); + strncpy(info->version, DRV_VERSION, sizeof(info->version)); + strncpy(info->fw_version, "N/A", sizeof(info->fw_version)); + strncpy(info->bus_info, "N/A", sizeof(info->bus_info)); + info->n_stats = 0; + info->testinfo_len = 0; + info->regdump_len = 0; + info->eedump_len = 0; +} + +static int octeon_mgmt_get_settings(struct net_device *netdev, + struct ethtool_cmd *cmd) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + if (p->phydev) + return phy_ethtool_gset(p->phydev, cmd); + + return -EINVAL; +} + +static int octeon_mgmt_set_settings(struct net_device *netdev, + struct ethtool_cmd *cmd) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (p->phydev) + return phy_ethtool_sset(p->phydev, cmd); + + return -EINVAL; +} + +static const struct ethtool_ops octeon_mgmt_ethtool_ops = { + .get_drvinfo = octeon_mgmt_get_drvinfo, + .get_link = ethtool_op_get_link, + .get_settings = octeon_mgmt_get_settings, + .set_settings = octeon_mgmt_set_settings +}; + +static const struct net_device_ops octeon_mgmt_ops = { + .ndo_open = octeon_mgmt_open, + .ndo_stop = octeon_mgmt_stop, + .ndo_start_xmit = octeon_mgmt_xmit, + .ndo_set_rx_mode = octeon_mgmt_set_rx_filtering, + .ndo_set_multicast_list = octeon_mgmt_set_rx_filtering, + .ndo_set_mac_address = octeon_mgmt_set_mac_address, + .ndo_do_ioctl = octeon_mgmt_ioctl, + .ndo_change_mtu = octeon_mgmt_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = octeon_mgmt_poll_controller, +#endif +}; + +static int __init octeon_mgmt_probe(struct platform_device *pdev) +{ + struct resource *res_irq; + struct net_device *netdev; + struct octeon_mgmt *p; + int i; + + netdev = alloc_etherdev(sizeof(struct octeon_mgmt)); + if (netdev == NULL) + return -ENOMEM; + + dev_set_drvdata(&pdev->dev, netdev); + p = netdev_priv(netdev); + netif_napi_add(netdev, &p->napi, octeon_mgmt_napi_poll, + OCTEON_MGMT_NAPI_WEIGHT); + + p->netdev = netdev; + p->dev = &pdev->dev; + + p->port = pdev->id; + snprintf(netdev->name, IFNAMSIZ, "mgmt%d", p->port); + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) + goto err; + + p->irq = res_irq->start; + spin_lock_init(&p->lock); + + skb_queue_head_init(&p->tx_list); + skb_queue_head_init(&p->rx_list); + tasklet_init(&p->tx_clean_tasklet, + octeon_mgmt_clean_tx_tasklet, (unsigned long)p); + + netdev->netdev_ops = &octeon_mgmt_ops; + netdev->ethtool_ops = &octeon_mgmt_ethtool_ops; + + + /* The mgmt ports get the first N MACs. */ + for (i = 0; i < 6; i++) + netdev->dev_addr[i] = octeon_bootinfo->mac_addr_base[i]; + netdev->dev_addr[5] += p->port; + + if (p->port >= octeon_bootinfo->mac_addr_count) + dev_err(&pdev->dev, + "Error %s: Using MAC outside of the assigned range: " + "%02x:%02x:%02x:%02x:%02x:%02x\n", netdev->name, + netdev->dev_addr[0], netdev->dev_addr[1], + netdev->dev_addr[2], netdev->dev_addr[3], + netdev->dev_addr[4], netdev->dev_addr[5]); + + if (register_netdev(netdev)) + goto err; + + dev_info(&pdev->dev, "Version " DRV_VERSION "\n"); + return 0; +err: + free_netdev(netdev); + return -ENOENT; +} + +static int __exit octeon_mgmt_remove(struct platform_device *pdev) +{ + struct net_device *netdev = dev_get_drvdata(&pdev->dev); + + unregister_netdev(netdev); + free_netdev(netdev); + return 0; +} + +static struct platform_driver octeon_mgmt_driver = { + .driver = { + .name = "octeon_mgmt", + .owner = THIS_MODULE, + }, + .probe = octeon_mgmt_probe, + .remove = __exit_p(octeon_mgmt_remove), +}; + +extern void octeon_mdiobus_force_mod_depencency(void); + +static int __init octeon_mgmt_mod_init(void) +{ + /* Force our mdiobus driver module to be loaded first. */ + octeon_mdiobus_force_mod_depencency(); + return platform_driver_register(&octeon_mgmt_driver); +} + +static void __exit octeon_mgmt_mod_exit(void) +{ + platform_driver_unregister(&octeon_mgmt_driver); +} + +module_init(octeon_mgmt_mod_init); +module_exit(octeon_mgmt_mod_exit); + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_AUTHOR("David Daney"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); -- GitLab From f6ed1b3b3579db5c8c3aaf6fd3010c706973a35d Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 14 Oct 2009 12:04:42 -0700 Subject: [PATCH 196/618] Staging: octeon-ethernet: Convert to use PHY Abstraction Layer. The octeon-ethernet driver shares an mdio bus with the octeon-mgmt driver. Here we convert the octeon-ethernet driver to use the PHY Abstraction Layer. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- drivers/staging/octeon/Kconfig | 3 +- drivers/staging/octeon/ethernet-mdio.c | 204 +++++++++-------------- drivers/staging/octeon/ethernet-mdio.h | 2 +- drivers/staging/octeon/ethernet-proc.c | 112 ------------- drivers/staging/octeon/ethernet-rgmii.c | 52 +++--- drivers/staging/octeon/ethernet-sgmii.c | 2 +- drivers/staging/octeon/ethernet-xaui.c | 2 +- drivers/staging/octeon/ethernet.c | 23 ++- drivers/staging/octeon/octeon-ethernet.h | 6 +- 9 files changed, 125 insertions(+), 281 deletions(-) diff --git a/drivers/staging/octeon/Kconfig b/drivers/staging/octeon/Kconfig index 536e2382de54..638ad6b35891 100644 --- a/drivers/staging/octeon/Kconfig +++ b/drivers/staging/octeon/Kconfig @@ -1,7 +1,8 @@ config OCTEON_ETHERNET tristate "Cavium Networks Octeon Ethernet support" depends on CPU_CAVIUM_OCTEON - select MII + select PHYLIB + select MDIO_OCTEON help This driver supports the builtin ethernet ports on Cavium Networks' products in the Octeon family. This driver supports the diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c index 31a58e508924..05a5cc0f43ed 100644 --- a/drivers/staging/octeon/ethernet-mdio.c +++ b/drivers/staging/octeon/ethernet-mdio.c @@ -26,7 +26,8 @@ **********************************************************************/ #include #include -#include +#include + #include #include @@ -34,86 +35,12 @@ #include "ethernet-defines.h" #include "octeon-ethernet.h" #include "ethernet-mdio.h" +#include "ethernet-util.h" #include "cvmx-helper-board.h" #include "cvmx-smix-defs.h" -DECLARE_MUTEX(mdio_sem); - -/** - * Perform an MII read. Called by the generic MII routines - * - * @dev: Device to perform read for - * @phy_id: The MII phy id - * @location: Register location to read - * Returns Result from the read or zero on failure - */ -static int cvm_oct_mdio_read(struct net_device *dev, int phy_id, int location) -{ - union cvmx_smix_cmd smi_cmd; - union cvmx_smix_rd_dat smi_rd; - - smi_cmd.u64 = 0; - smi_cmd.s.phy_op = 1; - smi_cmd.s.phy_adr = phy_id; - smi_cmd.s.reg_adr = location; - cvmx_write_csr(CVMX_SMIX_CMD(0), smi_cmd.u64); - - do { - if (!in_interrupt()) - yield(); - smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(0)); - } while (smi_rd.s.pending); - - if (smi_rd.s.val) - return smi_rd.s.dat; - else - return 0; -} - -static int cvm_oct_mdio_dummy_read(struct net_device *dev, int phy_id, - int location) -{ - return 0xffff; -} - -/** - * Perform an MII write. Called by the generic MII routines - * - * @dev: Device to perform write for - * @phy_id: The MII phy id - * @location: Register location to write - * @val: Value to write - */ -static void cvm_oct_mdio_write(struct net_device *dev, int phy_id, int location, - int val) -{ - union cvmx_smix_cmd smi_cmd; - union cvmx_smix_wr_dat smi_wr; - - smi_wr.u64 = 0; - smi_wr.s.dat = val; - cvmx_write_csr(CVMX_SMIX_WR_DAT(0), smi_wr.u64); - - smi_cmd.u64 = 0; - smi_cmd.s.phy_op = 0; - smi_cmd.s.phy_adr = phy_id; - smi_cmd.s.reg_adr = location; - cvmx_write_csr(CVMX_SMIX_CMD(0), smi_cmd.u64); - - do { - if (!in_interrupt()) - yield(); - smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(0)); - } while (smi_wr.s.pending); -} - -static void cvm_oct_mdio_dummy_write(struct net_device *dev, int phy_id, - int location, int val) -{ -} - static void cvm_oct_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { @@ -125,49 +52,37 @@ static void cvm_oct_get_drvinfo(struct net_device *dev, static int cvm_oct_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct octeon_ethernet *priv = netdev_priv(dev); - int ret; - down(&mdio_sem); - ret = mii_ethtool_gset(&priv->mii_info, cmd); - up(&mdio_sem); + if (priv->phydev) + return phy_ethtool_gset(priv->phydev, cmd); - return ret; + return -EINVAL; } static int cvm_oct_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct octeon_ethernet *priv = netdev_priv(dev); - int ret; - down(&mdio_sem); - ret = mii_ethtool_sset(&priv->mii_info, cmd); - up(&mdio_sem); + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (priv->phydev) + return phy_ethtool_sset(priv->phydev, cmd); - return ret; + return -EINVAL; } static int cvm_oct_nway_reset(struct net_device *dev) { struct octeon_ethernet *priv = netdev_priv(dev); - int ret; - down(&mdio_sem); - ret = mii_nway_restart(&priv->mii_info); - up(&mdio_sem); + if (!capable(CAP_NET_ADMIN)) + return -EPERM; - return ret; -} + if (priv->phydev) + return phy_start_aneg(priv->phydev); -static u32 cvm_oct_get_link(struct net_device *dev) -{ - struct octeon_ethernet *priv = netdev_priv(dev); - u32 ret; - - down(&mdio_sem); - ret = mii_link_ok(&priv->mii_info); - up(&mdio_sem); - - return ret; + return -EINVAL; } const struct ethtool_ops cvm_oct_ethtool_ops = { @@ -175,7 +90,7 @@ const struct ethtool_ops cvm_oct_ethtool_ops = { .get_settings = cvm_oct_get_settings, .set_settings = cvm_oct_set_settings, .nway_reset = cvm_oct_nway_reset, - .get_link = cvm_oct_get_link, + .get_link = ethtool_op_get_link, .get_sg = ethtool_op_get_sg, .get_tx_csum = ethtool_op_get_tx_csum, }; @@ -191,41 +106,78 @@ const struct ethtool_ops cvm_oct_ethtool_ops = { int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct octeon_ethernet *priv = netdev_priv(dev); - struct mii_ioctl_data *data = if_mii(rq); - unsigned int duplex_chg; - int ret; - down(&mdio_sem); - ret = generic_mii_ioctl(&priv->mii_info, data, cmd, &duplex_chg); - up(&mdio_sem); + if (!netif_running(dev)) + return -EINVAL; + + if (!priv->phydev) + return -EINVAL; + + return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd); +} - return ret; +static void cvm_oct_adjust_link(struct net_device *dev) +{ + struct octeon_ethernet *priv = netdev_priv(dev); + cvmx_helper_link_info_t link_info; + + if (priv->last_link != priv->phydev->link) { + priv->last_link = priv->phydev->link; + link_info.u64 = 0; + link_info.s.link_up = priv->last_link ? 1 : 0; + link_info.s.full_duplex = priv->phydev->duplex ? 1 : 0; + link_info.s.speed = priv->phydev->speed; + cvmx_helper_link_set( priv->port, link_info); + if (priv->last_link) { + netif_carrier_on(dev); + if (priv->queue != -1) + DEBUGPRINT("%s: %u Mbps %s duplex, " + "port %2d, queue %2d\n", + dev->name, priv->phydev->speed, + priv->phydev->duplex ? + "Full" : "Half", + priv->port, priv->queue); + else + DEBUGPRINT("%s: %u Mbps %s duplex, " + "port %2d, POW\n", + dev->name, priv->phydev->speed, + priv->phydev->duplex ? + "Full" : "Half", + priv->port); + } else { + netif_carrier_off(dev); + DEBUGPRINT("%s: Link down\n", dev->name); + } + } } + /** - * Setup the MDIO device structures + * Setup the PHY * * @dev: Device to setup * * Returns Zero on success, negative on failure */ -int cvm_oct_mdio_setup_device(struct net_device *dev) +int cvm_oct_phy_setup_device(struct net_device *dev) { struct octeon_ethernet *priv = netdev_priv(dev); - int phy_id = cvmx_helper_board_get_mii_address(priv->port); - if (phy_id != -1) { - priv->mii_info.dev = dev; - priv->mii_info.phy_id = phy_id; - priv->mii_info.phy_id_mask = 0xff; - priv->mii_info.supports_gmii = 1; - priv->mii_info.reg_num_mask = 0x1f; - priv->mii_info.mdio_read = cvm_oct_mdio_read; - priv->mii_info.mdio_write = cvm_oct_mdio_write; - } else { - /* Supply dummy MDIO routines so the kernel won't crash - if the user tries to read them */ - priv->mii_info.mdio_read = cvm_oct_mdio_dummy_read; - priv->mii_info.mdio_write = cvm_oct_mdio_dummy_write; + + int phy_addr = cvmx_helper_board_get_mii_address(priv->port); + if (phy_addr != -1) { + char phy_id[20]; + + snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", phy_addr); + + priv->phydev = phy_connect(dev, phy_id, cvm_oct_adjust_link, 0, + PHY_INTERFACE_MODE_GMII); + + if (IS_ERR(priv->phydev)) { + priv->phydev = NULL; + return -1; + } + priv->last_link = 0; + phy_start_aneg(priv->phydev); } return 0; } diff --git a/drivers/staging/octeon/ethernet-mdio.h b/drivers/staging/octeon/ethernet-mdio.h index b3328aeec2df..55d0614a7cd9 100644 --- a/drivers/staging/octeon/ethernet-mdio.h +++ b/drivers/staging/octeon/ethernet-mdio.h @@ -43,4 +43,4 @@ extern const struct ethtool_ops cvm_oct_ethtool_ops; int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -int cvm_oct_mdio_setup_device(struct net_device *dev); +int cvm_oct_phy_setup_device(struct net_device *dev); diff --git a/drivers/staging/octeon/ethernet-proc.c b/drivers/staging/octeon/ethernet-proc.c index 8fa88fc419b7..16308d484d3b 100644 --- a/drivers/staging/octeon/ethernet-proc.c +++ b/drivers/staging/octeon/ethernet-proc.c @@ -25,7 +25,6 @@ * Contact Cavium Networks for more information **********************************************************************/ #include -#include #include #include #include @@ -38,112 +37,6 @@ #include "cvmx-helper.h" #include "cvmx-pip.h" -static unsigned long long cvm_oct_stats_read_switch(struct net_device *dev, - int phy_id, int offset) -{ - struct octeon_ethernet *priv = netdev_priv(dev); - - priv->mii_info.mdio_write(dev, phy_id, 0x1d, 0xcc00 | offset); - return ((uint64_t) priv->mii_info. - mdio_read(dev, phy_id, - 0x1e) << 16) | (uint64_t) priv->mii_info. - mdio_read(dev, phy_id, 0x1f); -} - -static int cvm_oct_stats_switch_show(struct seq_file *m, void *v) -{ - static const int ports[] = { 0, 1, 2, 3, 9, -1 }; - struct net_device *dev = cvm_oct_device[0]; - int index = 0; - - while (ports[index] != -1) { - - /* Latch port */ - struct octeon_ethernet *priv = netdev_priv(dev); - - priv->mii_info.mdio_write(dev, 0x1b, 0x1d, - 0xdc00 | ports[index]); - seq_printf(m, "\nSwitch Port %d\n", ports[index]); - seq_printf(m, "InGoodOctets: %12llu\t" - "OutOctets: %12llu\t" - "64 Octets: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, - 0x00) | - (cvm_oct_stats_read_switch(dev, 0x1b, 0x01) << 32), - cvm_oct_stats_read_switch(dev, 0x1b, - 0x0E) | - (cvm_oct_stats_read_switch(dev, 0x1b, 0x0F) << 32), - cvm_oct_stats_read_switch(dev, 0x1b, 0x08)); - - seq_printf(m, "InBadOctets: %12llu\t" - "OutUnicast: %12llu\t" - "65-127 Octets: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x02), - cvm_oct_stats_read_switch(dev, 0x1b, 0x10), - cvm_oct_stats_read_switch(dev, 0x1b, 0x09)); - - seq_printf(m, "InUnicast: %12llu\t" - "OutBroadcasts: %12llu\t" - "128-255 Octets: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x04), - cvm_oct_stats_read_switch(dev, 0x1b, 0x13), - cvm_oct_stats_read_switch(dev, 0x1b, 0x0A)); - - seq_printf(m, "InBroadcasts: %12llu\t" - "OutMulticasts: %12llu\t" - "256-511 Octets: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x06), - cvm_oct_stats_read_switch(dev, 0x1b, 0x12), - cvm_oct_stats_read_switch(dev, 0x1b, 0x0B)); - - seq_printf(m, "InMulticasts: %12llu\t" - "OutPause: %12llu\t" - "512-1023 Octets:%12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x07), - cvm_oct_stats_read_switch(dev, 0x1b, 0x15), - cvm_oct_stats_read_switch(dev, 0x1b, 0x0C)); - - seq_printf(m, "InPause: %12llu\t" - "Excessive: %12llu\t" - "1024-Max Octets:%12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x16), - cvm_oct_stats_read_switch(dev, 0x1b, 0x11), - cvm_oct_stats_read_switch(dev, 0x1b, 0x0D)); - - seq_printf(m, "InUndersize: %12llu\t" - "Collisions: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x18), - cvm_oct_stats_read_switch(dev, 0x1b, 0x1E)); - - seq_printf(m, "InFragments: %12llu\t" - "Deferred: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x19), - cvm_oct_stats_read_switch(dev, 0x1b, 0x05)); - - seq_printf(m, "InOversize: %12llu\t" - "Single: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x1A), - cvm_oct_stats_read_switch(dev, 0x1b, 0x14)); - - seq_printf(m, "InJabber: %12llu\t" - "Multiple: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x1B), - cvm_oct_stats_read_switch(dev, 0x1b, 0x17)); - - seq_printf(m, "In RxErr: %12llu\t" - "OutFCSErr: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x1C), - cvm_oct_stats_read_switch(dev, 0x1b, 0x03)); - - seq_printf(m, "InFCSErr: %12llu\t" - "Late: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x1D), - cvm_oct_stats_read_switch(dev, 0x1b, 0x1F)); - index++; - } - return 0; -} - /** * User is reading /proc/octeon_ethernet_stats * @@ -215,11 +108,6 @@ static int cvm_oct_stats_show(struct seq_file *m, void *v) } } - if (cvm_oct_device[0]) { - priv = netdev_priv(cvm_oct_device[0]); - if (priv->imode == CVMX_HELPER_INTERFACE_MODE_GMII) - cvm_oct_stats_switch_show(m, v); - } return 0; } diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c index fbaa465d2fac..3820f1ec11d1 100644 --- a/drivers/staging/octeon/ethernet-rgmii.c +++ b/drivers/staging/octeon/ethernet-rgmii.c @@ -147,32 +147,36 @@ static void cvm_oct_rgmii_poll(struct net_device *dev) cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(index, interface), gmxx_rxx_int_reg.u64); } - - link_info = cvmx_helper_link_autoconf(priv->port); - priv->link_info = link_info.u64; + if (priv->phydev == NULL) { + link_info = cvmx_helper_link_autoconf(priv->port); + priv->link_info = link_info.u64; + } spin_unlock_irqrestore(&global_register_lock, flags); - /* Tell Linux */ - if (link_info.s.link_up) { - - if (!netif_carrier_ok(dev)) - netif_carrier_on(dev); - if (priv->queue != -1) - DEBUGPRINT - ("%s: %u Mbps %s duplex, port %2d, queue %2d\n", - dev->name, link_info.s.speed, - (link_info.s.full_duplex) ? "Full" : "Half", - priv->port, priv->queue); - else - DEBUGPRINT("%s: %u Mbps %s duplex, port %2d, POW\n", - dev->name, link_info.s.speed, - (link_info.s.full_duplex) ? "Full" : "Half", - priv->port); - } else { - - if (netif_carrier_ok(dev)) - netif_carrier_off(dev); - DEBUGPRINT("%s: Link down\n", dev->name); + if (priv->phydev == NULL) { + /* Tell core. */ + if (link_info.s.link_up) { + if (!netif_carrier_ok(dev)) + netif_carrier_on(dev); + if (priv->queue != -1) + DEBUGPRINT("%s: %u Mbps %s duplex, " + "port %2d, queue %2d\n", + dev->name, link_info.s.speed, + (link_info.s.full_duplex) ? + "Full" : "Half", + priv->port, priv->queue); + else + DEBUGPRINT("%s: %u Mbps %s duplex, " + "port %2d, POW\n", + dev->name, link_info.s.speed, + (link_info.s.full_duplex) ? + "Full" : "Half", + priv->port); + } else { + if (netif_carrier_ok(dev)) + netif_carrier_off(dev); + DEBUGPRINT("%s: Link down\n", dev->name); + } } } diff --git a/drivers/staging/octeon/ethernet-sgmii.c b/drivers/staging/octeon/ethernet-sgmii.c index 2b54996bd85d..6061d01eca2d 100644 --- a/drivers/staging/octeon/ethernet-sgmii.c +++ b/drivers/staging/octeon/ethernet-sgmii.c @@ -113,7 +113,7 @@ int cvm_oct_sgmii_init(struct net_device *dev) struct octeon_ethernet *priv = netdev_priv(dev); cvm_oct_common_init(dev); dev->netdev_ops->ndo_stop(dev); - if (!octeon_is_simulation()) + if (!octeon_is_simulation() && priv->phydev == NULL) priv->poll = cvm_oct_sgmii_poll; /* FIXME: Need autoneg logic */ diff --git a/drivers/staging/octeon/ethernet-xaui.c b/drivers/staging/octeon/ethernet-xaui.c index 0c2e7cc40f35..ee3dc41b2c53 100644 --- a/drivers/staging/octeon/ethernet-xaui.c +++ b/drivers/staging/octeon/ethernet-xaui.c @@ -112,7 +112,7 @@ int cvm_oct_xaui_init(struct net_device *dev) struct octeon_ethernet *priv = netdev_priv(dev); cvm_oct_common_init(dev); dev->netdev_ops->ndo_stop(dev); - if (!octeon_is_simulation()) + if (!octeon_is_simulation() && priv->phydev == NULL) priv->poll = cvm_oct_xaui_poll; return 0; diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index 492c5029992d..4cfd4b136b32 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include @@ -132,8 +132,6 @@ static struct timer_list cvm_oct_poll_timer; */ struct net_device *cvm_oct_device[TOTAL_NUMBER_OF_PORTS]; -extern struct semaphore mdio_sem; - /** * Periodic timer tick for slow management operations * @@ -160,13 +158,8 @@ static void cvm_do_timer(unsigned long arg) goto out; priv = netdev_priv(cvm_oct_device[port]); - if (priv->poll) { - /* skip polling if we don't get the lock */ - if (!down_trylock(&mdio_sem)) { - priv->poll(cvm_oct_device[port]); - up(&mdio_sem); - } - } + if (priv->poll) + priv->poll(cvm_oct_device[port]); queues_per_port = cvmx_pko_get_num_queues(port); /* Drain any pending packets in the free list */ @@ -524,7 +517,7 @@ int cvm_oct_common_init(struct net_device *dev) dev->features |= NETIF_F_LLTX; SET_ETHTOOL_OPS(dev, &cvm_oct_ethtool_ops); - cvm_oct_mdio_setup_device(dev); + cvm_oct_phy_setup_device(dev); dev->netdev_ops->ndo_set_mac_address(dev, &sa); dev->netdev_ops->ndo_change_mtu(dev, dev->mtu); @@ -540,7 +533,10 @@ int cvm_oct_common_init(struct net_device *dev) void cvm_oct_common_uninit(struct net_device *dev) { - /* Currently nothing to do */ + struct octeon_ethernet *priv = netdev_priv(dev); + + if (priv->phydev) + phy_disconnect(priv->phydev); } static const struct net_device_ops cvm_oct_npi_netdev_ops = { @@ -627,6 +623,8 @@ static const struct net_device_ops cvm_oct_pow_netdev_ops = { #endif }; +extern void octeon_mdiobus_force_mod_depencency(void); + /** * Module/ driver initialization. Creates the linux network * devices. @@ -640,6 +638,7 @@ static int __init cvm_oct_init_module(void) int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE; int qos; + octeon_mdiobus_force_mod_depencency(); pr_notice("cavium-ethernet %s\n", OCTEON_ETHERNET_VERSION); if (OCTEON_IS_MODEL(OCTEON_CN52XX)) diff --git a/drivers/staging/octeon/octeon-ethernet.h b/drivers/staging/octeon/octeon-ethernet.h index 3aef9878fc0a..402a15b9bb0e 100644 --- a/drivers/staging/octeon/octeon-ethernet.h +++ b/drivers/staging/octeon/octeon-ethernet.h @@ -50,9 +50,9 @@ struct octeon_ethernet { /* List of outstanding tx buffers per queue */ struct sk_buff_head tx_free_list[16]; /* Device statistics */ - struct net_device_stats stats -; /* Generic MII info structure */ - struct mii_if_info mii_info; + struct net_device_stats stats; + struct phy_device *phydev; + unsigned int last_link; /* Last negotiated link state */ uint64_t link_info; /* Called periodically to check link status */ -- GitLab From 92078e0618f525e22945040b5daea21d4b6d4a16 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 14 Oct 2009 12:16:55 -0700 Subject: [PATCH 197/618] MIPS: Add drotr and dins instructions to uasm. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/mm/uasm.c | 16 +++++++++++++--- arch/mips/mm/uasm.h | 7 +++++++ 2 files changed, 20 insertions(+), 3 deletions(-) diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c index f467199676a8..0a165c5179a1 100644 --- a/arch/mips/mm/uasm.c +++ b/arch/mips/mm/uasm.c @@ -60,11 +60,11 @@ enum opcode { insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl, insn_bne, insn_cache, insn_daddu, insn_daddiu, insn_dmfc0, insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, - insn_dsrl32, insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr, - insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, + insn_dsrl32, insn_drotr, insn_dsubu, insn_eret, insn_j, insn_jal, + insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, insn_mtc0, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll, insn_sra, insn_srl, insn_subu, insn_sw, - insn_tlbp, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori + insn_tlbp, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori, insn_dins }; struct insn { @@ -104,6 +104,7 @@ static struct insn insn_table[] __cpuinitdata = { { insn_dsra, M(spec_op, 0, 0, 0, 0, dsra_op), RT | RD | RE }, { insn_dsrl, M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE }, { insn_dsrl32, M(spec_op, 0, 0, 0, 0, dsrl32_op), RT | RD | RE }, + { insn_drotr, M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE }, { insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD }, { insn_eret, M(cop0_op, cop_op, 0, 0, 0, eret_op), 0 }, { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM }, @@ -132,6 +133,7 @@ static struct insn insn_table[] __cpuinitdata = { { insn_tlbwr, M(cop0_op, cop_op, 0, 0, 0, tlbwr_op), 0 }, { insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD }, { insn_xori, M(xori_op, 0, 0, 0, 0, 0), RS | RT | UIMM }, + { insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE }, { insn_invalid, 0, 0 } }; @@ -304,6 +306,12 @@ Ip_u2u1s3(op) \ build_insn(buf, insn##op, b, a, c); \ } +#define I_u2u1msbu3(op) \ +Ip_u2u1msbu3(op) \ +{ \ + build_insn(buf, insn##op, b, a, c+d-1, c); \ +} + #define I_u1u2(op) \ Ip_u1u2(op) \ { \ @@ -349,6 +357,7 @@ I_u2u1u3(_dsll32) I_u2u1u3(_dsra) I_u2u1u3(_dsrl) I_u2u1u3(_dsrl32) +I_u2u1u3(_drotr) I_u3u1u2(_dsubu) I_0(_eret) I_u1(_j) @@ -377,6 +386,7 @@ I_0(_tlbwi) I_0(_tlbwr) I_u3u1u2(_xor) I_u2u1u3(_xori) +I_u2u1msbu3(_dins); /* Handle labels. */ void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid) diff --git a/arch/mips/mm/uasm.h b/arch/mips/mm/uasm.h index c6d1e3dd82d4..3d153edaa51e 100644 --- a/arch/mips/mm/uasm.h +++ b/arch/mips/mm/uasm.h @@ -34,6 +34,11 @@ uasm_i##op(u32 **buf, unsigned int a, signed int b, unsigned int c) void __cpuinit \ uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c) +#define Ip_u2u1msbu3(op) \ +void __cpuinit \ +uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c, \ + unsigned int d) + #define Ip_u1u2(op) \ void __cpuinit uasm_i##op(u32 **buf, unsigned int a, unsigned int b) @@ -65,6 +70,7 @@ Ip_u2u1u3(_dsll32); Ip_u2u1u3(_dsra); Ip_u2u1u3(_dsrl); Ip_u2u1u3(_dsrl32); +Ip_u2u1u3(_drotr); Ip_u3u1u2(_dsubu); Ip_0(_eret); Ip_u1(_j); @@ -93,6 +99,7 @@ Ip_0(_tlbwi); Ip_0(_tlbwr); Ip_u3u1u2(_xor); Ip_u2u1u3(_xori); +Ip_u2u1msbu3(_dins); /* Handle labels. */ struct uasm_label { -- GitLab From 82622284dd2f8791f9759f3cef601520a8bc63b2 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 14 Oct 2009 12:16:56 -0700 Subject: [PATCH 198/618] MIPS: Put PGD in C0_CONTEXT for 64-bit R2 processors. Processors that support the mips64r2 ISA can in four instructions convert a shifted PGD pointer stored in the upper bits of c0_context into a usable pointer. By doing this we save a memory load and associated potential cache miss in the TLB exception handlers. Since the upper bits of c0_context were holding the CPU number, we move this to the upper bits of c0_xcontext which doesn't have enough bits to hold the PGD pointer, but has plenty for the CPU number. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 3 +++ arch/mips/include/asm/mmu_context.h | 29 ++++++++++++++++++++++++++++- arch/mips/include/asm/stackframe.h | 20 ++++++++++---------- arch/mips/mm/init.c | 2 ++ arch/mips/mm/tlbex.c | 28 +++++++++++++++++++++++++--- 5 files changed, 68 insertions(+), 14 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index f6f3b990d837..20b223ba654d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1427,6 +1427,9 @@ config CPU_SUPPORTS_64BIT_KERNEL bool config CPU_SUPPORTS_HUGEPAGES bool +config MIPS_PGD_C0_CONTEXT + bool + default y if 64BIT && CPU_MIPSR2 # # Set to y for ptrace access to watch registers. diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index 6083db586500..145bb81ccaa5 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -24,6 +24,33 @@ #endif /* SMTC */ #include +#ifdef CONFIG_MIPS_PGD_C0_CONTEXT + +#define TLBMISS_HANDLER_SETUP_PGD(pgd) \ + tlbmiss_handler_setup_pgd((unsigned long)(pgd)) + +static inline void tlbmiss_handler_setup_pgd(unsigned long pgd) +{ + /* Check for swapper_pg_dir and convert to physical address. */ + if ((pgd & CKSEG3) == CKSEG0) + pgd = CPHYSADDR(pgd); + write_c0_context(pgd << 11); +} + +#define TLBMISS_HANDLER_SETUP() \ + do { \ + TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir); \ + write_c0_xcontext((unsigned long) smp_processor_id() << 51); \ + } while (0) + + +static inline unsigned long get_current_pgd(void) +{ + return PHYS_TO_XKSEG_CACHED((read_c0_context() >> 11) & ~0xfffUL); +} + +#else /* CONFIG_MIPS_PGD_C0_CONTEXT: using pgd_current*/ + /* * For the fast tlb miss handlers, we keep a per cpu array of pointers * to the current pgd for each processor. Also, the proc. id is stuffed @@ -46,7 +73,7 @@ extern unsigned long pgd_current[]; back_to_back_c0_hazard(); \ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) #endif - +#endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/ #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) #define ASID_INC 0x40 diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index dd7e220e087b..3b6da3330e32 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -87,15 +87,19 @@ #ifdef CONFIG_SMP #ifdef CONFIG_MIPS_MT_SMTC #define PTEBASE_SHIFT 19 /* TCBIND */ +#define CPU_ID_REG CP0_TCBIND +#define CPU_ID_MFC0 mfc0 +#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT) +#define PTEBASE_SHIFT 48 /* XCONTEXT */ +#define CPU_ID_REG CP0_XCONTEXT +#define CPU_ID_MFC0 MFC0 #else #define PTEBASE_SHIFT 23 /* CONTEXT */ +#define CPU_ID_REG CP0_CONTEXT +#define CPU_ID_MFC0 MFC0 #endif .macro get_saved_sp /* SMP variation */ -#ifdef CONFIG_MIPS_MT_SMTC - mfc0 k0, CP0_TCBIND -#else - MFC0 k0, CP0_CONTEXT -#endif + CPU_ID_MFC0 k0, CPU_ID_REG #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) lui k1, %hi(kernelsp) #else @@ -111,11 +115,7 @@ .endm .macro set_saved_sp stackp temp temp2 -#ifdef CONFIG_MIPS_MT_SMTC - mfc0 \temp, CP0_TCBIND -#else - MFC0 \temp, CP0_CONTEXT -#endif + CPU_ID_MFC0 \temp, CPU_ID_REG LONG_SRL \temp, PTEBASE_SHIFT LONG_S \stackp, kernelsp(\temp) .endm diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 8d1f4f363049..9e8d00389eef 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -462,7 +462,9 @@ void __init_refok free_initmem(void) __pa_symbol(&__init_end)); } +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT unsigned long pgd_current[NR_CPUS]; +#endif /* * On 64-bit we've got three-level pagetables with a slightly * different layout ... diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index bb1719a55d22..3d0baa4a842d 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -160,6 +160,12 @@ static u32 tlb_handler[128] __cpuinitdata; static struct uasm_label labels[128] __cpuinitdata; static struct uasm_reloc relocs[128] __cpuinitdata; +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT +/* + * CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current, + * we cannot do r3000 under these circumstances. + */ + /* * The R3000 TLB handler is simple. */ @@ -199,6 +205,7 @@ static void __cpuinit build_r3000_tlb_refill_handler(void) dump_handler((u32 *)ebase, 32); } +#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */ /* * The R4000 TLB handler is much more complicated. We have two @@ -497,8 +504,9 @@ static void __cpuinit build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, unsigned int tmp, unsigned int ptr) { +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT long pgdc = (long)pgd_current; - +#endif /* * The vmalloc handling is not in the hotpath. */ @@ -506,7 +514,15 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, uasm_il_bltz(p, r, tmp, label_vmalloc); /* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */ -#ifdef CONFIG_SMP +#ifdef CONFIG_MIPS_PGD_C0_CONTEXT + /* + * &pgd << 11 stored in CONTEXT [23..63]. + */ + UASM_i_MFC0(p, ptr, C0_CONTEXT); + uasm_i_dins(p, ptr, 0, 0, 23); /* Clear lower 23 bits of context. */ + uasm_i_ori(p, ptr, ptr, 0x540); /* 1 0 1 0 1 << 6 xkphys cached */ + uasm_i_drotr(p, ptr, ptr, 11); +#elif defined(CONFIG_SMP) # ifdef CONFIG_MIPS_MT_SMTC /* * SMTC uses TCBind value as "CPU" index @@ -520,7 +536,7 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, */ uasm_i_dmfc0(p, ptr, C0_CONTEXT); uasm_i_dsrl(p, ptr, ptr, 23); -#endif +# endif UASM_i_LA_mostly(p, tmp, pgdc); uasm_i_daddu(p, ptr, ptr, tmp); uasm_i_dmfc0(p, tmp, C0_BADVADDR); @@ -1033,6 +1049,7 @@ build_pte_modifiable(u32 **p, struct uasm_reloc **r, iPTE_LW(p, pte, ptr); } +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT /* * R3000 style TLB load/store/modify handlers. */ @@ -1184,6 +1201,7 @@ static void __cpuinit build_r3000_tlb_modify_handler(void) dump_handler(handle_tlbm, ARRAY_SIZE(handle_tlbm)); } +#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */ /* * R4000 style TLB load/store/modify handlers. @@ -1400,6 +1418,7 @@ void __cpuinit build_tlb_refill_handler(void) case CPU_TX3912: case CPU_TX3922: case CPU_TX3927: +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT build_r3000_tlb_refill_handler(); if (!run_once) { build_r3000_tlb_load_handler(); @@ -1407,6 +1426,9 @@ void __cpuinit build_tlb_refill_handler(void) build_r3000_tlb_modify_handler(); run_once++; } +#else + panic("No R3000 TLB refill handler"); +#endif break; case CPU_R6000: -- GitLab From c1b14a7545e26fc08ea524b58ac590304484ce4f Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Wed, 14 Oct 2009 22:02:17 +0300 Subject: [PATCH 199/618] MIPS: MIPSsim: Remove unused code The function prom_init_cmdline() doesn't do anything, and nobody calls the prom_getcmdline() function. Since these two are the only functions in the file arch/mips/mipssim/sim_cmdline.c, the whole file can be removed now along with the call to the no-op prom_init_cmdline() routine. Signed-off-by: Dmitri Vorobiev Patchwork: http://patchwork.linux-mips.org/patch/465/ Signed-off-by: Ralf Baechle --- arch/mips/mipssim/Makefile | 3 +-- arch/mips/mipssim/sim_cmdline.c | 32 -------------------------------- arch/mips/mipssim/sim_setup.c | 1 - 3 files changed, 1 insertion(+), 35 deletions(-) delete mode 100644 arch/mips/mipssim/sim_cmdline.c diff --git a/arch/mips/mipssim/Makefile b/arch/mips/mipssim/Makefile index 57f43c1c7882..41b96571315e 100644 --- a/arch/mips/mipssim/Makefile +++ b/arch/mips/mipssim/Makefile @@ -17,8 +17,7 @@ # 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. # -obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o \ - sim_cmdline.o +obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o obj-$(CONFIG_EARLY_PRINTK) += sim_console.o obj-$(CONFIG_MIPS_MT_SMTC) += sim_smtc.o diff --git a/arch/mips/mipssim/sim_cmdline.c b/arch/mips/mipssim/sim_cmdline.c deleted file mode 100644 index 74240e1ce5a5..000000000000 --- a/arch/mips/mipssim/sim_cmdline.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - */ -#include -#include -#include - -extern char arcs_cmdline[]; - -char * __init prom_getcmdline(void) -{ - return arcs_cmdline; -} - -void __init prom_init_cmdline(void) -{ - /* XXX: Get boot line from environment? */ -} diff --git a/arch/mips/mipssim/sim_setup.c b/arch/mips/mipssim/sim_setup.c index 2877675c5f0d..0824f6af4777 100644 --- a/arch/mips/mipssim/sim_setup.c +++ b/arch/mips/mipssim/sim_setup.c @@ -61,7 +61,6 @@ void __init prom_init(void) set_io_port_base(0xbfd00000); pr_info("\nLINUX started...\n"); - prom_init_cmdline(); prom_meminit(); #ifdef CONFIG_MIPS_MT_SMP -- GitLab From 659da2ba3ebf53dc49f7f9a357a1aef046bf3139 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 16 Oct 2009 14:17:15 +0800 Subject: [PATCH 200/618] MIPS: Loongson: Register reserved memory pages Register reserved pages for Loongson family machines. Signed-off-by: Wu Zhangjin Cc: Linux-MIPS Cc: yanh@lemote.com, Cc: huhb@lemote.com Cc: Zhang Le Cc: zhangfx@lemote.com, Signed-off-by: Ralf Baechle --- arch/mips/loongson/common/mem.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c index e94ef158f980..3f7f153b1974 100644 --- a/arch/mips/loongson/common/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -12,14 +12,22 @@ #include #include +#include void __init prom_init_memory(void) { add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); + + add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << + 20), BOOT_MEM_RESERVED); #ifdef CONFIG_64BIT if (highmemsize > 0) add_memory_region(LOONGSON_HIGHMEM_START, highmemsize << 20, BOOT_MEM_RAM); + + add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - + LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); + #endif /* CONFIG_64BIT */ } -- GitLab From f6d4ff02c60e18797279270d09791768e43cd269 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 16 Oct 2009 14:17:14 +0800 Subject: [PATCH 201/618] MIPS: Fuloong2e: Cleanup Kconfig Changes indention from whitespace to tabs in arch/mips/loongson/Kconfig. Signed-off-by: Wu Zhangjin Cc: Linux-MIPS Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle --- arch/mips/loongson/Kconfig | 52 +++++++++++++++++++------------------- 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index d45092505fa1..818a0289711c 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -1,31 +1,31 @@ choice - prompt "Machine Type" - depends on MACH_LOONGSON + prompt "Machine Type" + depends on MACH_LOONGSON config LEMOTE_FULOONG2E - bool "Lemote Fuloong(2e) mini-PC" - select ARCH_SPARSEMEM_ENABLE - select CEVT_R4K - select CSRC_R4K - select SYS_HAS_CPU_LOONGSON2E - select DMA_NONCOHERENT - select BOOT_ELF32 - select BOARD_SCACHE - select HW_HAS_PCI - select I8259 - select ISA - select IRQ_CPU - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_HAS_EARLY_PRINTK - select GENERIC_HARDIRQS_NO__DO_IRQ - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select CPU_HAS_WB - help - Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and - an FPGA northbridge + bool "Lemote Fuloong(2e) mini-PC" + select ARCH_SPARSEMEM_ENABLE + select CEVT_R4K + select CSRC_R4K + select SYS_HAS_CPU_LOONGSON2E + select DMA_NONCOHERENT + select BOOT_ELF32 + select BOARD_SCACHE + select HW_HAS_PCI + select I8259 + select ISA + select IRQ_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_HAS_EARLY_PRINTK + select GENERIC_HARDIRQS_NO__DO_IRQ + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select CPU_HAS_WB + help + Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and + an FPGA northbridge - Lemote Fuloong(2e) mini PC have a VIA686B south bridge. + Lemote Fuloong(2e) mini PC have a VIA686B south bridge. endchoice -- GitLab From db54ff246eae5acb6b7dffec2c05e682f91e0f4e Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 16 Oct 2009 14:17:16 +0800 Subject: [PATCH 202/618] MIPS: Loongson early_printk: Fix variable type of uart_base The uart_base variable here is not a physical address, so, we replace it by unsigned char *. Signed-off-by: Wu Zhangjin Cc: Linux-MIPS Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle --- arch/mips/loongson/common/early_printk.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c index bc73edc0cfd8..8ec4fb2066ae 100644 --- a/arch/mips/loongson/common/early_printk.c +++ b/arch/mips/loongson/common/early_printk.c @@ -1,7 +1,7 @@ /* early printk support * * Copyright (c) 2009 Philippe Vachon - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (c) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzj@lemote.com * * This program is free software; you can redistribute it and/or modify it @@ -16,20 +16,20 @@ #define PORT(base, offset) (u8 *)(base + offset) -static inline unsigned int serial_in(phys_addr_t base, int offset) +static inline unsigned int serial_in(unsigned char *base, int offset) { return readb(PORT(base, offset)); } -static inline void serial_out(phys_addr_t base, int offset, int value) +static inline void serial_out(unsigned char *base, int offset, int value) { writeb(value, PORT(base, offset)); } void prom_putchar(char c) { - phys_addr_t uart_base = - (phys_addr_t) ioremap_nocache(LOONGSON_UART_BASE, 8); + unsigned char *uart_base = + (unsigned char *) ioremap_nocache(LOONGSON_UART_BASE, 8); while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) ; -- GitLab From e8be5283881cb96bafb751e1f9ea34c4e6fc2845 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 16 Oct 2009 14:17:18 +0800 Subject: [PATCH 203/618] MIPS: Loongson: Add serial port support This patch add serial port support for all of the existing loongson family machines. most of the board specific part are put in serial.c, and the base address of the serial ports are defined as macros in machine.h for sharing it between serial.c and early_printk.c Signed-off-by: Wu Zhangjin Cc: Linux-MIPS Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle --- arch/mips/loongson/common/Makefile | 1 + arch/mips/loongson/common/serial.c | 71 ++++++++++++++++++++++++++++++ 2 files changed, 72 insertions(+) create mode 100644 arch/mips/loongson/common/serial.c diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index 656b3cc0a2a6..d21d1163fad0 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -9,3 +9,4 @@ obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ # Early printk support # obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_SERIAL_8250) += serial.o diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c new file mode 100644 index 000000000000..6d341e426f64 --- /dev/null +++ b/arch/mips/loongson/common/serial.c @@ -0,0 +1,71 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Yan hua (yanhua@lemote.com) + * Author: Wu Zhangjin (wuzj@lemote.com) + */ + +#include +#include +#include + +#include + +#include +#include + +#define PORT(int) \ +{ \ + .irq = int, \ + .uartclk = 1843200, \ + .iobase = (LOONGSON_UART_BASE - LOONGSON_PCIIO_BASE),\ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +#define PORT_M(int) \ +{ \ + .irq = MIPS_CPU_IRQ_BASE + (int), \ + .uartclk = 3686400, \ + .iotype = UPIO_MEM, \ + .membase = (void __iomem *)NULL, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +static struct plat_serial8250_port uart8250_data[][2] = { + [MACH_LOONGSON_UNKNOWN] {}, + [MACH_LEMOTE_FL2E] {PORT(4), {} }, + [MACH_LEMOTE_FL2F] {PORT(3), {} }, + [MACH_LEMOTE_ML2F7] {PORT_M(3), {} }, + [MACH_LEMOTE_YL2F89] {PORT_M(3), {} }, + [MACH_DEXXON_GDIUM2F10] {PORT_M(3), {} }, + [MACH_LOONGSON_END] {}, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = uart8250_data[LOONGSON_MACHTYPE], + }, +}; + +static int __init serial_init(void) +{ + if (uart8250_data[LOONGSON_MACHTYPE][0].iotype == UPIO_MEM) + uart8250_data[LOONGSON_MACHTYPE][0].membase = + ioremap_nocache(LOONGSON_UART_BASE, 8); + + platform_device_register(&uart8250_device); + + return 0; +} + +device_initcall(serial_init); -- GitLab From e2fee5723bbda4a05c86f16a9d0f889a2c4ecede Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 16 Oct 2009 14:17:19 +0800 Subject: [PATCH 204/618] MIPS: Bonito64: Make Loongson independent from Bonito64 code. The built-in Loongson 2E/2F northbridge in is bonito64-compatible but not identical with it. To avoid influencing the original bonito64 support and make the loongson support more maintainable, it's better to separate the Bonito64 code from the Loongson code. This also prepares the kernel for the coming Loongson 2f machines family support. Signed-off-by: Wu Zhangjin Cc: Linux-MIPS Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le Cc: zhangfx@lemote.com, Signed-off-by: Ralf Baechle --- .../mips/include/asm/mach-loongson/loongson.h | 182 ++++++++++++++++-- arch/mips/include/asm/mach-loongson/machine.h | 2 +- arch/mips/include/asm/mach-loongson/pci.h | 6 +- arch/mips/include/asm/mips-boards/bonito64.h | 5 - arch/mips/loongson/common/bonito-irq.c | 8 +- arch/mips/loongson/common/init.c | 2 +- arch/mips/loongson/common/irq.c | 12 +- arch/mips/loongson/common/pci.c | 12 +- arch/mips/loongson/common/reset.c | 2 +- arch/mips/loongson/fuloong-2e/irq.c | 4 +- arch/mips/loongson/fuloong-2e/reset.c | 4 +- arch/mips/pci/Makefile | 2 +- arch/mips/pci/fixup-fuloong2e.c | 5 +- arch/mips/pci/ops-bonito64.c | 7 - arch/mips/pci/ops-fuloong2e.c | 154 +++++++++++++++ 15 files changed, 352 insertions(+), 55 deletions(-) create mode 100644 arch/mips/pci/ops-fuloong2e.c diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index da70bcf2304e..e6869aa52bc8 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -15,9 +15,6 @@ #include #include -/* there is an internal bonito64-compatiable northbridge in loongson2e/2f */ -#include - /* loongson internal northbridge initialization */ extern void bonito_irq_init(void); @@ -41,24 +38,181 @@ extern void __init set_irq_trigger_mode(void); extern void __init mach_init_irq(void); extern void mach_irq_dispatch(unsigned int pending); +#define LOONGSON_REG(x) \ + (*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x))) + +#define LOONGSON_IRQ_BASE 32 +#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */ + +#define LOONGSON_FLASH_BASE 0x1c000000 +#define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */ +#define LOONGSON_FLASH_TOP (LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1) + +#define LOONGSON_LIO0_BASE 0x1e000000 +#define LOONGSON_LIO0_SIZE 0x01C00000 /* 28M */ +#define LOONGSON_LIO0_TOP (LOONGSON_LIO0_BASE+LOONGSON_LIO0_SIZE-1) + +#define LOONGSON_BOOT_BASE 0x1fc00000 +#define LOONGSON_BOOT_SIZE 0x00100000 /* 1M */ +#define LOONGSON_BOOT_TOP (LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1) +#define LOONGSON_REG_BASE 0x1fe00000 +#define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */ +#define LOONGSON_REG_TOP (LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1) + +#define LOONGSON_LIO1_BASE 0x1ff00000 +#define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */ +#define LOONGSON_LIO1_TOP (LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1) + +#define LOONGSON_PCILO0_BASE 0x10000000 +#define LOONGSON_PCILO1_BASE 0x14000000 +#define LOONGSON_PCILO2_BASE 0x18000000 +#define LOONGSON_PCILO_BASE LOONGSON_PCILO0_BASE +#define LOONGSON_PCILO_SIZE 0x0c000000 /* 64M * 3 */ +#define LOONGSON_PCILO_TOP (LOONGSON_PCILO0_BASE+LOONGSON_PCILO_SIZE-1) + +#define LOONGSON_PCICFG_BASE 0x1fe80000 +#define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */ +#define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1) +#define LOONGSON_PCIIO_BASE 0x1fd00000 +#define LOONGSON_PCIIO_SIZE 0x00100000 /* 1M */ +#define LOONGSON_PCIIO_TOP (LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1) + +/* Loongson Register Bases */ + +#define LOONGSON_PCICONFIGBASE 0x00 +#define LOONGSON_REGBASE 0x100 + /* PCI Configuration Registers */ -#define LOONGSON_PCI_ISR4C BONITO_PCI_REG(0x4c) + +#define LOONGSON_PCI_REG(x) LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x)) +#define LOONGSON_PCIDID LOONGSON_PCI_REG(0x00) +#define LOONGSON_PCICMD LOONGSON_PCI_REG(0x04) +#define LOONGSON_PCICLASS LOONGSON_PCI_REG(0x08) +#define LOONGSON_PCILTIMER LOONGSON_PCI_REG(0x0c) +#define LOONGSON_PCIBASE0 LOONGSON_PCI_REG(0x10) +#define LOONGSON_PCIBASE1 LOONGSON_PCI_REG(0x14) +#define LOONGSON_PCIBASE2 LOONGSON_PCI_REG(0x18) +#define LOONGSON_PCIBASE3 LOONGSON_PCI_REG(0x1c) +#define LOONGSON_PCIBASE4 LOONGSON_PCI_REG(0x20) +#define LOONGSON_PCIEXPRBASE LOONGSON_PCI_REG(0x30) +#define LOONGSON_PCIINT LOONGSON_PCI_REG(0x3c) + +#define LOONGSON_PCI_ISR4C LOONGSON_PCI_REG(0x4c) + +#define LOONGSON_PCICMD_PERR_CLR 0x80000000 +#define LOONGSON_PCICMD_SERR_CLR 0x40000000 +#define LOONGSON_PCICMD_MABORT_CLR 0x20000000 +#define LOONGSON_PCICMD_MTABORT_CLR 0x10000000 +#define LOONGSON_PCICMD_TABORT_CLR 0x08000000 +#define LOONGSON_PCICMD_MPERR_CLR 0x01000000 +#define LOONGSON_PCICMD_PERRRESPEN 0x00000040 +#define LOONGSON_PCICMD_ASTEPEN 0x00000080 +#define LOONGSON_PCICMD_SERREN 0x00000100 +#define LOONGSON_PCILTIMER_BUSLATENCY 0x0000ff00 +#define LOONGSON_PCILTIMER_BUSLATENCY_SHIFT 8 + +/* Loongson h/w Configuration */ + +#define LOONGSON_GENCFG_OFFSET 0x4 +#define LOONGSON_GENCFG LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET) + +#define LOONGSON_GENCFG_DEBUGMODE 0x00000001 +#define LOONGSON_GENCFG_SNOOPEN 0x00000002 +#define LOONGSON_GENCFG_CPUSELFRESET 0x00000004 + +#define LOONGSON_GENCFG_FORCE_IRQA 0x00000008 +#define LOONGSON_GENCFG_IRQA_ISOUT 0x00000010 +#define LOONGSON_GENCFG_IRQA_FROM_INT1 0x00000020 +#define LOONGSON_GENCFG_BYTESWAP 0x00000040 + +#define LOONGSON_GENCFG_UNCACHED 0x00000080 +#define LOONGSON_GENCFG_PREFETCHEN 0x00000100 +#define LOONGSON_GENCFG_WBEHINDEN 0x00000200 +#define LOONGSON_GENCFG_CACHEALG 0x00000c00 +#define LOONGSON_GENCFG_CACHEALG_SHIFT 10 +#define LOONGSON_GENCFG_PCIQUEUE 0x00001000 +#define LOONGSON_GENCFG_CACHESTOP 0x00002000 +#define LOONGSON_GENCFG_MSTRBYTESWAP 0x00004000 +#define LOONGSON_GENCFG_BUSERREN 0x00008000 +#define LOONGSON_GENCFG_NORETRYTIMEOUT 0x00010000 +#define LOONGSON_GENCFG_SHORTCOPYTIMEOUT 0x00020000 + +/* PCI address map control */ + +#define LOONGSON_PCIMAP LOONGSON_REG(LOONGSON_REGBASE + 0x10) +#define LOONGSON_PCIMEMBASECFG LOONGSON_REG(LOONGSON_REGBASE + 0x14) +#define LOONGSON_PCIMAP_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x18) + +/* GPIO Regs - r/w */ + +#define LOONGSON_GPIODATA LOONGSON_REG(LOONGSON_REGBASE + 0x1c) +#define LOONGSON_GPIOIE LOONGSON_REG(LOONGSON_REGBASE + 0x20) + +/* ICU Configuration Regs - r/w */ + +#define LOONGSON_INTEDGE LOONGSON_REG(LOONGSON_REGBASE + 0x24) +#define LOONGSON_INTSTEER LOONGSON_REG(LOONGSON_REGBASE + 0x28) +#define LOONGSON_INTPOL LOONGSON_REG(LOONGSON_REGBASE + 0x2c) + +/* ICU Enable Regs - IntEn & IntISR are r/o. */ + +#define LOONGSON_INTENSET LOONGSON_REG(LOONGSON_REGBASE + 0x30) +#define LOONGSON_INTENCLR LOONGSON_REG(LOONGSON_REGBASE + 0x34) +#define LOONGSON_INTEN LOONGSON_REG(LOONGSON_REGBASE + 0x38) +#define LOONGSON_INTISR LOONGSON_REG(LOONGSON_REGBASE + 0x3c) + +/* ICU */ +#define LOONGSON_ICU_MBOXES 0x0000000f +#define LOONGSON_ICU_MBOXES_SHIFT 0 +#define LOONGSON_ICU_DMARDY 0x00000010 +#define LOONGSON_ICU_DMAEMPTY 0x00000020 +#define LOONGSON_ICU_COPYRDY 0x00000040 +#define LOONGSON_ICU_COPYEMPTY 0x00000080 +#define LOONGSON_ICU_COPYERR 0x00000100 +#define LOONGSON_ICU_PCIIRQ 0x00000200 +#define LOONGSON_ICU_MASTERERR 0x00000400 +#define LOONGSON_ICU_SYSTEMERR 0x00000800 +#define LOONGSON_ICU_DRAMPERR 0x00001000 +#define LOONGSON_ICU_RETRYERR 0x00002000 +#define LOONGSON_ICU_GPIOS 0x01ff0000 +#define LOONGSON_ICU_GPIOS_SHIFT 16 +#define LOONGSON_ICU_GPINS 0x7e000000 +#define LOONGSON_ICU_GPINS_SHIFT 25 +#define LOONGSON_ICU_MBOX(N) (1<<(LOONGSON_ICU_MBOXES_SHIFT+(N))) +#define LOONGSON_ICU_GPIO(N) (1<<(LOONGSON_ICU_GPIOS_SHIFT+(N))) +#define LOONGSON_ICU_GPIN(N) (1<<(LOONGSON_ICU_GPINS_SHIFT+(N))) + +/* PCI prefetch window base & mask */ + +#define LOONGSON_MEM_WIN_BASE_L LOONGSON_REG(LOONGSON_REGBASE + 0x40) +#define LOONGSON_MEM_WIN_BASE_H LOONGSON_REG(LOONGSON_REGBASE + 0x44) +#define LOONGSON_MEM_WIN_MASK_L LOONGSON_REG(LOONGSON_REGBASE + 0x48) +#define LOONGSON_MEM_WIN_MASK_H LOONGSON_REG(LOONGSON_REGBASE + 0x4c) /* PCI_Hit*_Sel_* */ -#define LOONGSON_PCI_HIT0_SEL_L BONITO(BONITO_REGBASE + 0x50) -#define LOONGSON_PCI_HIT0_SEL_H BONITO(BONITO_REGBASE + 0x54) -#define LOONGSON_PCI_HIT1_SEL_L BONITO(BONITO_REGBASE + 0x58) -#define LOONGSON_PCI_HIT1_SEL_H BONITO(BONITO_REGBASE + 0x5c) -#define LOONGSON_PCI_HIT2_SEL_L BONITO(BONITO_REGBASE + 0x60) -#define LOONGSON_PCI_HIT2_SEL_H BONITO(BONITO_REGBASE + 0x64) +#define LOONGSON_PCI_HIT0_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x50) +#define LOONGSON_PCI_HIT0_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x54) +#define LOONGSON_PCI_HIT1_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x58) +#define LOONGSON_PCI_HIT1_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x5c) +#define LOONGSON_PCI_HIT2_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x60) +#define LOONGSON_PCI_HIT2_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x64) /* PXArb Config & Status */ -#define LOONGSON_PXARB_CFG BONITO(BONITO_REGBASE + 0x68) -#define LOONGSON_PXARB_STATUS BONITO(BONITO_REGBASE + 0x6c) +#define LOONGSON_PXARB_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x68) +#define LOONGSON_PXARB_STATUS LOONGSON_REG(LOONGSON_REGBASE + 0x6c) + +/* pcimap */ -/* loongson2-specific perf counter IRQ */ -#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) +#define LOONGSON_PCIMAP_PCIMAP_LO0 0x0000003f +#define LOONGSON_PCIMAP_PCIMAP_LO0_SHIFT 0 +#define LOONGSON_PCIMAP_PCIMAP_LO1 0x00000fc0 +#define LOONGSON_PCIMAP_PCIMAP_LO1_SHIFT 6 +#define LOONGSON_PCIMAP_PCIMAP_LO2 0x0003f000 +#define LOONGSON_PCIMAP_PCIMAP_LO2_SHIFT 12 +#define LOONGSON_PCIMAP_PCIMAP_2 0x00040000 +#define LOONGSON_PCIMAP_WIN(WIN, ADDR) \ + ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) #endif /* __ASM_MACH_LOONGSON_LOONGSON_H */ diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h index 206ea2067916..ea5954c4b221 100644 --- a/arch/mips/include/asm/mach-loongson/machine.h +++ b/arch/mips/include/asm/mach-loongson/machine.h @@ -13,7 +13,7 @@ #ifdef CONFIG_LEMOTE_FULOONG2E -#define LOONGSON_UART_BASE (BONITO_PCIIO_BASE + 0x3f8) +#define LOONGSON_UART_BASE (LOONGSON_PCIIO_BASE + 0x3f8) #define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson/pci.h index f1663ca81da0..576487c00470 100644 --- a/arch/mips/include/asm/mach-loongson/pci.h +++ b/arch/mips/include/asm/mach-loongson/pci.h @@ -22,13 +22,13 @@ #ifndef __ASM_MACH_LOONGSON_PCI_H_ #define __ASM_MACH_LOONGSON_PCI_H_ -extern struct pci_ops bonito64_pci_ops; +extern struct pci_ops loongson_pci_ops; #ifdef CONFIG_LEMOTE_FULOONG2E /* this pci memory space is mapped by pcimap in pci.c */ -#define LOONGSON_PCI_MEM_START BONITO_PCILO1_BASE -#define LOONGSON_PCI_MEM_END (BONITO_PCILO1_BASE + 0x04000000 * 2) +#define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE +#define LOONGSON_PCI_MEM_END (LOONGSON_PCILO1_BASE + 0x04000000 * 2) /* this is an offset from mips_io_port_base */ #define LOONGSON_PCI_IO_START 0x00004000UL diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h index a576ce044c3c..d14e2adc4be5 100644 --- a/arch/mips/include/asm/mips-boards/bonito64.h +++ b/arch/mips/include/asm/mips-boards/bonito64.h @@ -26,11 +26,6 @@ /* offsets from base register */ #define BONITO(x) (x) -#elif defined(CONFIG_LEMOTE_FULOONG2E) - -#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x))) -#define BONITO_IRQ_BASE 32 - #else /* diff --git a/arch/mips/loongson/common/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c index 3e31e7ad713e..a1cbd110a6e4 100644 --- a/arch/mips/loongson/common/bonito-irq.c +++ b/arch/mips/loongson/common/bonito-irq.c @@ -17,13 +17,13 @@ static inline void bonito_irq_enable(unsigned int irq) { - BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE)); + LOONGSON_INTENSET = (1 << (irq - LOONGSON_IRQ_BASE)); mmiowb(); } static inline void bonito_irq_disable(unsigned int irq) { - BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE)); + LOONGSON_INTENCLR = (1 << (irq - LOONGSON_IRQ_BASE)); mmiowb(); } @@ -44,8 +44,8 @@ void bonito_irq_init(void) { u32 i; - for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++) + for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++) set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq); - setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction); + setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction); } diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c index 3abe927422a3..b7e4913627ab 100644 --- a/arch/mips/loongson/common/init.c +++ b/arch/mips/loongson/common/init.c @@ -18,7 +18,7 @@ void __init prom_init(void) { /* init base address of io space */ set_io_port_base((unsigned long) - ioremap(BONITO_PCIIO_BASE, BONITO_PCIIO_SIZE)); + ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); prom_init_cmdline(); prom_init_env(); diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c index b32b4a3e5137..20e732831978 100644 --- a/arch/mips/loongson/common/irq.c +++ b/arch/mips/loongson/common/irq.c @@ -20,21 +20,21 @@ void bonito_irqdispatch(void) int i; /* workaround the IO dma problem: let cpu looping to allow DMA finish */ - int_status = BONITO_INTISR; + int_status = LOONGSON_INTISR; if (int_status & (1 << 10)) { while (int_status & (1 << 10)) { udelay(1); - int_status = BONITO_INTISR; + int_status = LOONGSON_INTISR; } } /* Get pending sources, masked by current enables */ - int_status = BONITO_INTISR & BONITO_INTEN; + int_status = LOONGSON_INTISR & LOONGSON_INTEN; if (int_status != 0) { i = __ffs(int_status); int_status &= ~(1 << i); - do_IRQ(BONITO_IRQ_BASE + i); + do_IRQ(LOONGSON_IRQ_BASE + i); } } @@ -60,13 +60,13 @@ void __init arch_init_irq(void) set_irq_trigger_mode(); /* no steer */ - BONITO_INTSTEER = 0; + LOONGSON_INTSTEER = 0; /* * Mask out all interrupt by writing "1" to all bit position in * the interrupt reset reg. */ - BONITO_INTENCLR = ~0; + LOONGSON_INTENCLR = ~0; /* machine specific irq init */ mach_init_irq(); diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c index a3a4abfb6c9a..a7eb8b9c44ee 100644 --- a/arch/mips/loongson/common/pci.c +++ b/arch/mips/loongson/common/pci.c @@ -27,7 +27,7 @@ static struct resource loongson_pci_io_resource = { }; static struct pci_controller loongson_pci_controller = { - .pci_ops = &bonito64_pci_ops, + .pci_ops = &loongson_pci_ops, .io_resource = &loongson_pci_io_resource, .mem_resource = &loongson_pci_mem_resource, .mem_offset = 0x00000000UL, @@ -44,15 +44,15 @@ static void __init setup_pcimap(void) * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0 * [<2G] [384M,448M] [320M,384M] [0M,64M] */ - BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 | - BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) | - BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) | - BONITO_PCIMAP_WIN(0, 0); + LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 | + LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) | + LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) | + LOONGSON_PCIMAP_WIN(0, 0); /* * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M] */ - BONITO_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ + LOONGSON_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ /* size: 256M, burst transmission, pre-fetch enable, 64bit */ LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul; LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful; diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c index 97e918251edd..d57f1719da95 100644 --- a/arch/mips/loongson/common/reset.c +++ b/arch/mips/loongson/common/reset.c @@ -22,7 +22,7 @@ static void loongson_restart(char *command) mach_prepare_reboot(); /* reboot via jumping to boot base address */ - ((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) (); + ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); } static void loongson_halt(void) diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c index 7888cf69424a..320e9379bdd7 100644 --- a/arch/mips/loongson/fuloong-2e/irq.c +++ b/arch/mips/loongson/fuloong-2e/irq.c @@ -47,8 +47,8 @@ static struct irqaction cascade_irqaction = { void __init set_irq_trigger_mode(void) { /* most bonito irq should be level triggered */ - BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR | - BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES; + LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR | + LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES; } void __init mach_init_irq(void) diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c index 677fe186db95..fc16c677d476 100644 --- a/arch/mips/loongson/fuloong-2e/reset.c +++ b/arch/mips/loongson/fuloong-2e/reset.c @@ -14,8 +14,8 @@ void mach_prepare_reboot(void) { - BONITO_BONGENCFG &= ~(1 << 2); - BONITO_BONGENCFG |= (1 << 2); + LOONGSON_GENCFG &= ~(1 << 2); + LOONGSON_GENCFG |= (1 << 2); } void mach_prepare_shutdown(void) diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 91bfe73a7f60..0610c869852d 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -28,7 +28,7 @@ obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o -obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-bonito64.o +obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-fuloong2e.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c index 0c4c7a81213f..4f6d8da07f93 100644 --- a/arch/mips/pci/fixup-fuloong2e.c +++ b/arch/mips/pci/fixup-fuloong2e.c @@ -13,7 +13,8 @@ */ #include #include -#include + +#include /* South bridge slot number is set by the pci probe process */ static u8 sb_slot = 5; @@ -35,7 +36,7 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) break; } } else { - irq = BONITO_IRQ_BASE + 25 + pin; + irq = LOONGSON_IRQ_BASE + 25 + pin; } return irq; diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c index 54e55e7a2431..1b3e03f20c54 100644 --- a/arch/mips/pci/ops-bonito64.c +++ b/arch/mips/pci/ops-bonito64.c @@ -29,13 +29,8 @@ #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 -#ifdef CONFIG_LEMOTE_FULOONG2E -#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset)) -#define ID_SEL_BEGIN 11 -#else #define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset)) #define ID_SEL_BEGIN 10 -#endif #define MAX_DEV_NUM (31 - ID_SEL_BEGIN) @@ -77,10 +72,8 @@ static int bonito64_pcibios_config_access(unsigned char access_type, addrp = CFG_SPACE_REG(addr & 0xffff); if (access_type == PCI_ACCESS_WRITE) { writel(cpu_to_le32(*data), addrp); -#ifndef CONFIG_LEMOTE_FULOONG2E /* Wait till done */ while (BONITO_PCIMSTAT & 0xF); -#endif } else { *data = le32_to_cpu(readl(addrp)); } diff --git a/arch/mips/pci/ops-fuloong2e.c b/arch/mips/pci/ops-fuloong2e.c new file mode 100644 index 000000000000..171f65c99ca1 --- /dev/null +++ b/arch/mips/pci/ops-fuloong2e.c @@ -0,0 +1,154 @@ +/* + * fuloong2e specific PCI support. + * + * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include + +#include + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +#define CFG_SPACE_REG(offset) \ + (void *)CKSEG1ADDR(LOONGSON_PCICFG_BASE | (offset)) +#define ID_SEL_BEGIN 11 +#define MAX_DEV_NUM (31 - ID_SEL_BEGIN) + + +static int loongson_pcibios_config_access(unsigned char access_type, + struct pci_bus *bus, + unsigned int devfn, int where, + u32 *data) +{ + u32 busnum = bus->number; + u32 addr, type; + u32 dummy; + void *addrp; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + int reg = where & ~3; + + if (busnum == 0) { + /* Type 0 configuration for onboard PCI bus */ + if (device > MAX_DEV_NUM) + return -1; + + addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg; + type = 0; + } else { + /* Type 1 configuration for offboard PCI bus */ + addr = (busnum << 16) | (device << 11) | (function << 8) | reg; + type = 0x10000; + } + + /* Clear aborts */ + LOONGSON_PCICMD |= LOONGSON_PCICMD_MABORT_CLR | \ + LOONGSON_PCICMD_MTABORT_CLR; + + LOONGSON_PCIMAP_CFG = (addr >> 16) | type; + + /* Flush Bonito register block */ + dummy = LOONGSON_PCIMAP_CFG; + mmiowb(); + + addrp = CFG_SPACE_REG(addr & 0xffff); + if (access_type == PCI_ACCESS_WRITE) + writel(cpu_to_le32(*data), addrp); + else + *data = le32_to_cpu(readl(addrp)); + + /* Detect Master/Target abort */ + if (LOONGSON_PCICMD & (LOONGSON_PCICMD_MABORT_CLR | + LOONGSON_PCICMD_MTABORT_CLR)) { + /* Error occurred */ + + /* Clear bits */ + LOONGSON_PCICMD |= (LOONGSON_PCICMD_MABORT_CLR | + LOONGSON_PCICMD_MTABORT_CLR); + + return -1; + } + + return 0; + +} + + +/* + * We can't address 8 and 16 bit words directly. Instead we have to + * read/write a 32bit word and mask/modify the data we actually want. + */ +static int loongson_pcibios_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where, + &data)) + return -1; + + if (size == 1) + *val = (data >> ((where & 3) << 3)) & 0xff; + else if (size == 2) + *val = (data >> ((where & 3) << 3)) & 0xffff; + else + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + +static int loongson_pcibios_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (size == 4) + data = val; + else { + if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) + return -1; + + if (size == 1) + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else if (size == 2) + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + } + + if (loongson_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where, + &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops loongson_pci_ops = { + .read = loongson_pcibios_read, + .write = loongson_pcibios_write +}; -- GitLab From 0e8cccc40665a2943f2bf93b9036579e85a716f4 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 16 Oct 2009 14:17:20 +0800 Subject: [PATCH 205/618] MIPS: Fuloong 2E: Update defconfig file Enable hibernation support by default. Also enable sparsemem to avoid the hibernation failures with flatmem and save memory wasted by flatmem. Signed-off-by: Wu Zhangjin Cc: Linux-MIPS Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle --- arch/mips/configs/fuloong2e_defconfig | 93 ++++++++++++++++++--------- 1 file changed, 61 insertions(+), 32 deletions(-) diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index 0197f0de6b3f..b3626deb018d 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc1 -# Thu Jul 2 22:37:00 2009 +# Linux kernel version: 2.6.32-rc4 +# Fri Oct 16 13:18:01 2009 # CONFIG_MIPS=y @@ -12,6 +12,7 @@ CONFIG_MIPS=y # CONFIG_AR7 is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -105,6 +106,8 @@ CONFIG_CPU_LOONGSON2E=y # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set # CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y CONFIG_CPU_LOONGSON2=y CONFIG_SYS_HAS_CPU_LOONGSON2E=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y @@ -135,12 +138,16 @@ CONFIG_SYS_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y + +# +# Memory hotplug is currently incompatible with Software Suspend +# CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PHYS_ADDR_T_64BIT=y @@ -148,6 +155,7 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y @@ -180,6 +188,12 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-fuloong2e" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -193,11 +207,12 @@ CONFIG_BSD_PROCESS_ACCT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -235,18 +250,16 @@ CONFIG_SHMEM=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_SYSCALL_WRAPPERS=y @@ -255,8 +268,8 @@ CONFIG_HAVE_SYSCALL_WRAPPERS=y # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set -# CONFIG_SLOW_WORK is not set -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLOW_WORK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 @@ -283,7 +296,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -# CONFIG_FREEZER is not set +CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -321,9 +334,14 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y # CONFIG_SUSPEND is not set -# CONFIG_HIBERNATION is not set +CONFIG_HIBERNATION_NVS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="/dev/hda3" +# CONFIG_PM_RUNTIME is not set CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options @@ -442,6 +460,7 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -473,6 +492,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -481,7 +501,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set CONFIG_NET_9P=m @@ -495,6 +514,7 @@ CONFIG_NET_9P=m # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -504,9 +524,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_PARTITIONS is not set -# CONFIG_MTD_TESTS is not set # # User Modules And Translation Layers @@ -820,6 +840,7 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -867,10 +888,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -886,6 +904,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_CDC_PHONET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -933,12 +952,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -946,6 +969,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set @@ -1015,6 +1039,7 @@ CONFIG_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y @@ -1070,9 +1095,6 @@ CONFIG_I2C_VIAPRO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1088,7 +1110,6 @@ CONFIG_I2C_VIAPRO=m # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1105,6 +1126,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1114,6 +1136,7 @@ CONFIG_SSB_POSSIBLE=y # # Graphics support # +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1198,6 +1221,7 @@ CONFIG_FONT_8x16=y # CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1304,7 +1328,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y # @@ -1356,6 +1379,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_ISP1760_HCD=m +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1453,6 +1477,7 @@ CONFIG_UIO_CIF=m # CONFIG_UIO_SMX is not set # CONFIG_UIO_AEC is not set # CONFIG_UIO_SERCOS3 is not set +# CONFIG_UIO_PCI_GENERIC is not set # # TI VLYNQ @@ -1469,10 +1494,10 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -CONFIG_EXT4DEV_COMPAT=y CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set @@ -1489,6 +1514,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1557,7 +1583,6 @@ CONFIG_OMFS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -1666,6 +1691,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=2048 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1678,6 +1704,7 @@ CONFIG_NOP_TRACER=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set @@ -1742,11 +1769,13 @@ CONFIG_CRYPTO_XTS=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_GHASH=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_MICHAEL_MIC is not set -- GitLab From 32028f1f7bce32e72183129dc55fc23656e7081c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Dec 2009 01:57:07 +0000 Subject: [PATCH 206/618] MIPS: Remove addinitrd and CONFIG_PROBE_INITRD_HEADER Addinitrd has been superseded by initramfs ages ago. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 9 -- arch/mips/boot/Makefile | 8 +- arch/mips/boot/addinitrd.c | 131 ---------------------- arch/mips/configs/ar7_defconfig | 1 - arch/mips/configs/cavium-octeon_defconfig | 1 - arch/mips/configs/rbtx49xx_defconfig | 1 - arch/mips/kernel/setup.c | 20 +--- 7 files changed, 3 insertions(+), 168 deletions(-) delete mode 100644 arch/mips/boot/addinitrd.c diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 20b223ba654d..a16b6dfe3bc3 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2041,15 +2041,6 @@ config STACKTRACE_SUPPORT source "init/Kconfig" -config PROBE_INITRD_HEADER - bool "Probe initrd header created by addinitrd" - depends on BLK_DEV_INITRD - help - Probe initrd header at the last page of kernel image. - Say Y here if you are using arch/mips/boot/addinitrd.c to - add initrd or initramfs image to the kernel image. - Otherwise, say N. - source "kernel/Kconfig.freezer" menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile index 2a209d74f0b4..094bc84765a3 100644 --- a/arch/mips/boot/Makefile +++ b/arch/mips/boot/Makefile @@ -25,7 +25,7 @@ strip-flags = $(addprefix --remove-section=,$(drop-sections)) VMLINUX = vmlinux -all: vmlinux.ecoff vmlinux.srec addinitrd +all: vmlinux.ecoff vmlinux.srec vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX) $(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS) @@ -39,11 +39,7 @@ vmlinux.bin: $(VMLINUX) vmlinux.srec: $(VMLINUX) $(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec -$(obj)/addinitrd: $(obj)/addinitrd.c - $(HOSTCC) -o $@ $^ - -clean-files += addinitrd \ - elf2ecoff \ +clean-files += elf2ecoff \ vmlinux.bin \ vmlinux.ecoff \ vmlinux.srec diff --git a/arch/mips/boot/addinitrd.c b/arch/mips/boot/addinitrd.c deleted file mode 100644 index b5b3febc10cc..000000000000 --- a/arch/mips/boot/addinitrd.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * addinitrd - program to add a initrd image to an ecoff kernel - * - * (C) 1999 Thomas Bogendoerfer - * minor modifications, cleanup: Guido Guenther - * further cleanup: Maciej W. Rozycki - */ - -#include -#include -#include -#include -#include -#include - -#include "ecoff.h" - -#define MIPS_PAGE_SIZE 4096 -#define MIPS_PAGE_MASK (MIPS_PAGE_SIZE-1) - -#define swab16(x) \ - ((unsigned short)( \ - (((unsigned short)(x) & (unsigned short)0x00ffU) << 8) | \ - (((unsigned short)(x) & (unsigned short)0xff00U) >> 8) )) - -#define swab32(x) \ - ((unsigned int)( \ - (((unsigned int)(x) & (unsigned int)0x000000ffUL) << 24) | \ - (((unsigned int)(x) & (unsigned int)0x0000ff00UL) << 8) | \ - (((unsigned int)(x) & (unsigned int)0x00ff0000UL) >> 8) | \ - (((unsigned int)(x) & (unsigned int)0xff000000UL) >> 24) )) - -#define SWAB(a) (swab ? swab32(a) : (a)) - -void die(char *s) -{ - perror(s); - exit(1); -} - -int main(int argc, char *argv[]) -{ - int fd_vmlinux, fd_initrd, fd_outfile; - FILHDR efile; - AOUTHDR eaout; - SCNHDR esecs[3]; - struct stat st; - char buf[1024]; - unsigned long loadaddr; - unsigned long initrd_header[2]; - int i, cnt; - int swab = 0; - - if (argc != 4) { - printf("Usage: %s \n", argv[0]); - exit(1); - } - - if ((fd_vmlinux = open (argv[1], O_RDONLY)) < 0) - die("open vmlinux"); - if (read (fd_vmlinux, &efile, sizeof efile) != sizeof efile) - die("read file header"); - if (read (fd_vmlinux, &eaout, sizeof eaout) != sizeof eaout) - die("read aout header"); - if (read (fd_vmlinux, esecs, sizeof esecs) != sizeof esecs) - die("read section headers"); - /* - * check whether the file is good for us - */ - /* TBD */ - - /* - * check, if we have to swab words - */ - if (ntohs(0xaa55) == 0xaa55) { - if (efile.f_magic == swab16(MIPSELMAGIC)) - swab = 1; - } else { - if (efile.f_magic == swab16(MIPSEBMAGIC)) - swab = 1; - } - - /* make sure we have an empty data segment for the initrd */ - if (eaout.dsize || esecs[1].s_size) { - fprintf(stderr, "Data segment not empty. Giving up!\n"); - exit(1); - } - if ((fd_initrd = open (argv[2], O_RDONLY)) < 0) - die("open initrd"); - if (fstat (fd_initrd, &st) < 0) - die("fstat initrd"); - loadaddr = ((SWAB(esecs[2].s_vaddr) + SWAB(esecs[2].s_size) - + MIPS_PAGE_SIZE-1) & ~MIPS_PAGE_MASK) - 8; - if (loadaddr < (SWAB(esecs[2].s_vaddr) + SWAB(esecs[2].s_size))) - loadaddr += MIPS_PAGE_SIZE; - initrd_header[0] = SWAB(0x494E5244); - initrd_header[1] = SWAB(st.st_size); - eaout.dsize = esecs[1].s_size = initrd_header[1] = SWAB(st.st_size+8); - eaout.data_start = esecs[1].s_vaddr = esecs[1].s_paddr = SWAB(loadaddr); - - if ((fd_outfile = open (argv[3], O_RDWR|O_CREAT|O_TRUNC, 0666)) < 0) - die("open outfile"); - if (write (fd_outfile, &efile, sizeof efile) != sizeof efile) - die("write file header"); - if (write (fd_outfile, &eaout, sizeof eaout) != sizeof eaout) - die("write aout header"); - if (write (fd_outfile, esecs, sizeof esecs) != sizeof esecs) - die("write section headers"); - /* skip padding */ - if(lseek(fd_vmlinux, SWAB(esecs[0].s_scnptr), SEEK_SET) == (off_t)-1) - die("lseek vmlinux"); - if(lseek(fd_outfile, SWAB(esecs[0].s_scnptr), SEEK_SET) == (off_t)-1) - die("lseek outfile"); - /* copy text segment */ - cnt = SWAB(eaout.tsize); - while (cnt) { - if ((i = read (fd_vmlinux, buf, sizeof buf)) <= 0) - die("read vmlinux"); - if (write (fd_outfile, buf, i) != i) - die("write vmlinux"); - cnt -= i; - } - if (write (fd_outfile, initrd_header, sizeof initrd_header) != sizeof initrd_header) - die("write initrd header"); - while ((i = read (fd_initrd, buf, sizeof buf)) > 0) - if (write (fd_outfile, buf, i) != i) - die("write initrd"); - close(fd_vmlinux); - close(fd_initrd); - return 0; -} diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig index 35648302f7cc..2cb304a226ad 100644 --- a/arch/mips/configs/ar7_defconfig +++ b/arch/mips/configs/ar7_defconfig @@ -265,7 +265,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_PROBE_INITRD_HEADER=y # CONFIG_FREEZER is not set # diff --git a/arch/mips/configs/cavium-octeon_defconfig b/arch/mips/configs/cavium-octeon_defconfig index 7afaa28a3768..1819a4c907ba 100644 --- a/arch/mips/configs/cavium-octeon_defconfig +++ b/arch/mips/configs/cavium-octeon_defconfig @@ -269,7 +269,6 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y -# CONFIG_PROBE_INITRD_HEADER is not set # CONFIG_FREEZER is not set # diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index 6c6a19aebe1f..4f3b970006fc 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -284,7 +284,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_PROBE_INITRD_HEADER is not set # CONFIG_FREEZER is not set # diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index fd138c9b33ef..bd55f71055ba 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -166,26 +166,8 @@ static unsigned long __init init_initrd(void) * already set up initrd_start and initrd_end. In these cases * perfom sanity checks and use them if all looks good. */ - if (!initrd_start || initrd_end <= initrd_start) { -#ifdef CONFIG_PROBE_INITRD_HEADER - u32 *initrd_header; - - /* - * See if initrd has been added to the kernel image by - * arch/mips/boot/addinitrd.c. In that case a header is - * prepended to initrd and is made up by 8 bytes. The first - * word is a magic number and the second one is the size of - * initrd. Initrd start must be page aligned in any cases. - */ - initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8; - if (initrd_header[0] != 0x494E5244) - goto disable; - initrd_start = (unsigned long)(initrd_header + 2); - initrd_end = initrd_start + initrd_header[1]; -#else + if (!initrd_start || initrd_end <= initrd_start) goto disable; -#endif - } if (initrd_start & ~PAGE_MASK) { pr_err("initrd start must be page aligned\n"); -- GitLab From b6ee75ed4fa201873d3a2b32dfce2dbd701a2de4 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 5 Nov 2009 11:34:26 -0800 Subject: [PATCH 207/618] MIPS: Collect FPU emulator statistics per-CPU. On SMP systems, the collection of statistics can cause cache line bouncing in the lines associated with the counters. Also there are races incrementing the counters on multiple CPUs. To fix both problems, we collect the statistics in per-CPU variables, and add them up in the debugfs read operation. As a test I ran the LTP float_bessel test on a 12 CPU Octeon system. Without CONFIG_DEBUG_FS : 2602 seconds. With CONFIG_DEBUG_FS: 2640 seconds. With non-cpu-local atomic statistics: 14569 seconds. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- arch/mips/include/asm/fpu_emulator.h | 24 +++++-- arch/mips/math-emu/cp1emu.c | 102 ++++++++++++++++----------- arch/mips/math-emu/dsemul.c | 4 +- 3 files changed, 80 insertions(+), 50 deletions(-) diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h index e5189572956c..aecada6f6117 100644 --- a/arch/mips/include/asm/fpu_emulator.h +++ b/arch/mips/include/asm/fpu_emulator.h @@ -25,17 +25,27 @@ #include #include +#include + +#ifdef CONFIG_DEBUG_FS struct mips_fpu_emulator_stats { - unsigned int emulated; - unsigned int loads; - unsigned int stores; - unsigned int cp1ops; - unsigned int cp1xops; - unsigned int errors; + local_t emulated; + local_t loads; + local_t stores; + local_t cp1ops; + local_t cp1xops; + local_t errors; }; -extern struct mips_fpu_emulator_stats fpuemustats; +DECLARE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats); + +#define MIPS_FPU_EMU_INC_STATS(M) \ + cpu_local_wrap(__local_inc(&__get_cpu_var(fpuemustats).M)) + +#else +#define MIPS_FPU_EMU_INC_STATS(M) do { } while (0) +#endif /* CONFIG_DEBUG_FS */ extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc); diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 454b53924490..8f2f8e9d8b21 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -35,6 +35,7 @@ * better performance by compiling with -msoft-float! */ #include +#include #include #include @@ -68,7 +69,9 @@ static int fpux_emu(struct pt_regs *, /* Further private data for which no space exists in mips_fpu_struct */ -struct mips_fpu_emulator_stats fpuemustats; +#ifdef CONFIG_DEBUG_FS +DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats); +#endif /* Control registers */ @@ -209,7 +212,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) unsigned int cond; if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } @@ -240,7 +243,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) return SIGILL; } if (get_user(ir, (mips_instruction __user *) emulpc)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } /* __compute_return_epc() will have updated cp0_epc */ @@ -253,16 +256,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) } emul: - fpuemustats.emulated++; + MIPS_FPU_EMU_INC_STATS(emulated); switch (MIPSInst_OPCODE(ir)) { case ldc1_op:{ u64 __user *va = (u64 __user *) (xcp->regs[MIPSInst_RS(ir)] + MIPSInst_SIMM(ir)); u64 val; - fpuemustats.loads++; + MIPS_FPU_EMU_INC_STATS(loads); if (get_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } DITOREG(val, MIPSInst_RT(ir)); @@ -274,10 +277,10 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPSInst_SIMM(ir)); u64 val; - fpuemustats.stores++; + MIPS_FPU_EMU_INC_STATS(stores); DIFROMREG(val, MIPSInst_RT(ir)); if (put_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } break; @@ -288,9 +291,9 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPSInst_SIMM(ir)); u32 val; - fpuemustats.loads++; + MIPS_FPU_EMU_INC_STATS(loads); if (get_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } SITOREG(val, MIPSInst_RT(ir)); @@ -302,10 +305,10 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPSInst_SIMM(ir)); u32 val; - fpuemustats.stores++; + MIPS_FPU_EMU_INC_STATS(stores); SIFROMREG(val, MIPSInst_RT(ir)); if (put_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } break; @@ -429,7 +432,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } @@ -595,7 +598,7 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, { unsigned rcsr = 0; /* resulting csr */ - fpuemustats.cp1xops++; + MIPS_FPU_EMU_INC_STATS(cp1xops); switch (MIPSInst_FMA_FFMT(ir)) { case s_fmt:{ /* 0 */ @@ -610,9 +613,9 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); - fpuemustats.loads++; + MIPS_FPU_EMU_INC_STATS(loads); if (get_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } SITOREG(val, MIPSInst_FD(ir)); @@ -622,11 +625,11 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); - fpuemustats.stores++; + MIPS_FPU_EMU_INC_STATS(stores); SIFROMREG(val, MIPSInst_FS(ir)); if (put_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } break; @@ -687,9 +690,9 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); - fpuemustats.loads++; + MIPS_FPU_EMU_INC_STATS(loads); if (get_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } DITOREG(val, MIPSInst_FD(ir)); @@ -699,10 +702,10 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); - fpuemustats.stores++; + MIPS_FPU_EMU_INC_STATS(stores); DIFROMREG(val, MIPSInst_FS(ir)); if (put_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } break; @@ -769,7 +772,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, #endif } rv; /* resulting value */ - fpuemustats.cp1ops++; + MIPS_FPU_EMU_INC_STATS(cp1ops); switch (rfmt = (MIPSInst_FFMT(ir) & 0xf)) { case s_fmt:{ /* 0 */ union { @@ -1240,7 +1243,7 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, prevepc = xcp->cp0_epc; if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } if (insn == 0) @@ -1276,33 +1279,50 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, } #ifdef CONFIG_DEBUG_FS + +static int fpuemu_stat_get(void *data, u64 *val) +{ + int cpu; + unsigned long sum = 0; + for_each_online_cpu(cpu) { + struct mips_fpu_emulator_stats *ps; + local_t *pv; + ps = &per_cpu(fpuemustats, cpu); + pv = (void *)ps + (unsigned long)data; + sum += local_read(pv); + } + *val = sum; + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(fops_fpuemu_stat, fpuemu_stat_get, NULL, "%llu\n"); + extern struct dentry *mips_debugfs_dir; static int __init debugfs_fpuemu(void) { struct dentry *d, *dir; - int i; - static struct { - const char *name; - unsigned int *v; - } vars[] __initdata = { - { "emulated", &fpuemustats.emulated }, - { "loads", &fpuemustats.loads }, - { "stores", &fpuemustats.stores }, - { "cp1ops", &fpuemustats.cp1ops }, - { "cp1xops", &fpuemustats.cp1xops }, - { "errors", &fpuemustats.errors }, - }; if (!mips_debugfs_dir) return -ENODEV; dir = debugfs_create_dir("fpuemustats", mips_debugfs_dir); if (!dir) return -ENOMEM; - for (i = 0; i < ARRAY_SIZE(vars); i++) { - d = debugfs_create_u32(vars[i].name, S_IRUGO, dir, vars[i].v); - if (!d) - return -ENOMEM; - } + +#define FPU_STAT_CREATE(M) \ + do { \ + d = debugfs_create_file(#M , S_IRUGO, dir, \ + (void *)offsetof(struct mips_fpu_emulator_stats, M), \ + &fops_fpuemu_stat); \ + if (!d) \ + return -ENOMEM; \ + } while (0) + + FPU_STAT_CREATE(emulated); + FPU_STAT_CREATE(loads); + FPU_STAT_CREATE(stores); + FPU_STAT_CREATE(cp1ops); + FPU_STAT_CREATE(cp1xops); + FPU_STAT_CREATE(errors); + return 0; } __initcall(debugfs_fpuemu); diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c index df7b9d928efc..36d975ae08f8 100644 --- a/arch/mips/math-emu/dsemul.c +++ b/arch/mips/math-emu/dsemul.c @@ -98,7 +98,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc) err |= __put_user(cpc, &fr->epc); if (unlikely(err)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } @@ -136,7 +136,7 @@ int do_dsemulret(struct pt_regs *xcp) err |= __get_user(cookie, &fr->cookie); if (unlikely(err || (insn != BREAK_MATH) || (cookie != BD_COOKIE))) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return 0; } -- GitLab From 04cfb90a92a2f9f7b56b2f85c528be7d1561e0e5 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 6 Nov 2009 18:35:33 +0800 Subject: [PATCH 208/618] MIPS: Loongson: Cleanup machtype support To choose code for different machines by the value of machtype it needs to be initialized as early as possible. So move initialization of mips_machtype to prom_init(). Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- .../mips/include/asm/mach-loongson/loongson.h | 1 + arch/mips/loongson/common/cmdline.c | 4 +++- arch/mips/loongson/common/machtype.c | 23 ++++++++++++------- 3 files changed, 19 insertions(+), 9 deletions(-) diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index e6869aa52bc8..efb234437791 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -29,6 +29,7 @@ extern unsigned long memsize, highmemsize; /* loongson-specific command line, env and memory initialization */ extern void __init prom_init_memory(void); extern void __init prom_init_cmdline(void); +extern void __init prom_init_machtype(void); extern void __init prom_init_env(void); /* irq operation functions */ diff --git a/arch/mips/loongson/common/cmdline.c b/arch/mips/loongson/common/cmdline.c index 75f1b243ee4e..7ad47f227477 100644 --- a/arch/mips/loongson/common/cmdline.c +++ b/arch/mips/loongson/common/cmdline.c @@ -9,7 +9,7 @@ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology * Author: Fuxin Zhang, zhangfx@lemote.com * - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzj@lemote.com * * This program is free software; you can redistribute it and/or modify it @@ -49,4 +49,6 @@ void __init prom_init_cmdline(void) strcat(arcs_cmdline, " console=ttyS0,115200"); if ((strstr(arcs_cmdline, "root=")) == NULL) strcat(arcs_cmdline, " root=/dev/hda1"); + + prom_init_machtype(); } diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c index 7b348248de7d..7545fe69089f 100644 --- a/arch/mips/loongson/common/machtype.c +++ b/arch/mips/loongson/common/machtype.c @@ -15,6 +15,9 @@ #include #include +/* please ensure the length of the machtype string is less than 50 */ +#define MACHTYPE_LEN 50 + static const char *system_types[] = { [MACH_LOONGSON_UNKNOWN] "unknown loongson machine", [MACH_LEMOTE_FL2E] "lemote-fuloong-2e-box", @@ -27,24 +30,28 @@ static const char *system_types[] = { const char *get_system_type(void) { - if (mips_machtype == MACH_UNKNOWN) - mips_machtype = LOONGSON_MACHTYPE; - return system_types[mips_machtype]; } -static __init int machtype_setup(char *str) +void __init prom_init_machtype(void) { + char *p, str[MACHTYPE_LEN]; int machtype = MACH_LEMOTE_FL2E; - if (!str) - return -EINVAL; + mips_machtype = LOONGSON_MACHTYPE; + + p = strstr(arcs_cmdline, "machtype="); + if (!p) + return; + p += strlen("machtype="); + strncpy(str, p, MACHTYPE_LEN); + p = strstr(str, " "); + if (p) + *p = '\0'; for (; system_types[machtype]; machtype++) if (strstr(system_types[machtype], str)) { mips_machtype = machtype; break; } - return 0; } -__setup("machtype=", machtype_setup); -- GitLab From a3ed495190ebe918f4584291ed8c76f1c97a84fd Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 6 Nov 2009 18:35:34 +0800 Subject: [PATCH 209/618] MIPS: Loongson: Cleanup the serial port support To share the same kernel image amon different machines we have added the machtype command line support. In the old serial port implementation the UART base address is hardcoded as a macro in machine.h which breaks with machtype, so change that to discover the address dynamically. Also move the initialization of the UART base address to uart_base.c to avoid remapping twice for early_printk.c and serial.c. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/581/ Patchwork: http://patchwork.linux-mips.org/patch/682/ Signed-off-by: Ralf Baechle --- .../mips/include/asm/mach-loongson/loongson.h | 3 ++ arch/mips/include/asm/mach-loongson/machine.h | 2 -- arch/mips/loongson/common/Makefile | 2 +- arch/mips/loongson/common/early_printk.c | 11 +++--- arch/mips/loongson/common/init.c | 11 +++--- arch/mips/loongson/common/serial.c | 17 +++++----- arch/mips/loongson/common/uart_base.c | 34 +++++++++++++++++++ 7 files changed, 60 insertions(+), 20 deletions(-) create mode 100644 arch/mips/loongson/common/uart_base.c diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index efb234437791..722db9e811e5 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -31,6 +31,9 @@ extern void __init prom_init_memory(void); extern void __init prom_init_cmdline(void); extern void __init prom_init_machtype(void); extern void __init prom_init_env(void); +extern unsigned long _loongson_uart_base; +extern unsigned long uart8250_base[]; +extern void prom_init_uart_base(void); /* irq operation functions */ extern void bonito_irqdispatch(void); diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h index ea5954c4b221..d2f586157630 100644 --- a/arch/mips/include/asm/mach-loongson/machine.h +++ b/arch/mips/include/asm/mach-loongson/machine.h @@ -13,8 +13,6 @@ #ifdef CONFIG_LEMOTE_FULOONG2E -#define LOONGSON_UART_BASE (LOONGSON_PCIIO_BASE + 0x3f8) - #define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E #endif diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index d21d1163fad0..be6adf7eb825 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -3,7 +3,7 @@ # obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ - pci.o bonito-irq.o mem.o machtype.o + pci.o bonito-irq.o mem.o machtype.o uart_base.o # # Early printk support diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c index 8ec4fb2066ae..23e7a8f8897f 100644 --- a/arch/mips/loongson/common/early_printk.c +++ b/arch/mips/loongson/common/early_printk.c @@ -12,7 +12,6 @@ #include #include -#include #define PORT(base, offset) (u8 *)(base + offset) @@ -28,10 +27,14 @@ static inline void serial_out(unsigned char *base, int offset, int value) void prom_putchar(char c) { - unsigned char *uart_base = - (unsigned char *) ioremap_nocache(LOONGSON_UART_BASE, 8); + int timeout; + unsigned char *uart_base; - while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) + uart_base = (unsigned char *)_loongson_uart_base; + timeout = 1024; + + while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) && + (timeout-- > 0)) ; serial_out(uart_base, UART_TX, c); diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c index b7e4913627ab..3b1dbc1ca242 100644 --- a/arch/mips/loongson/common/init.c +++ b/arch/mips/loongson/common/init.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzj@lemote.com * * This program is free software; you can redistribute it and/or modify it @@ -10,19 +10,22 @@ #include -#include - #include void __init prom_init(void) { - /* init base address of io space */ + /* init base address of io space */ set_io_port_base((unsigned long) ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); prom_init_cmdline(); prom_init_env(); prom_init_memory(); + + /*init the uart base address */ +#if defined(CONFIG_EARLY_PRINTK) || defined(CONFIG_SERIAL_8250) + prom_init_uart_base(); +#endif } void __init prom_free_prom_memory(void) diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c index 6d341e426f64..dc6488c14763 100644 --- a/arch/mips/loongson/common/serial.c +++ b/arch/mips/loongson/common/serial.c @@ -23,7 +23,6 @@ { \ .irq = int, \ .uartclk = 1843200, \ - .iobase = (LOONGSON_UART_BASE - LOONGSON_PCIIO_BASE),\ .iotype = UPIO_PORT, \ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ .regshift = 0, \ @@ -52,20 +51,20 @@ static struct plat_serial8250_port uart8250_data[][2] = { static struct platform_device uart8250_device = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = uart8250_data[LOONGSON_MACHTYPE], - }, }; static int __init serial_init(void) { - if (uart8250_data[LOONGSON_MACHTYPE][0].iotype == UPIO_MEM) - uart8250_data[LOONGSON_MACHTYPE][0].membase = - ioremap_nocache(LOONGSON_UART_BASE, 8); + if (uart8250_data[mips_machtype][0].iotype == UPIO_MEM) + uart8250_data[mips_machtype][0].membase = + (void __iomem *)_loongson_uart_base; + else if (uart8250_data[mips_machtype][0].iotype == UPIO_PORT) + uart8250_data[mips_machtype][0].iobase = + uart8250_base[mips_machtype] - LOONGSON_PCIIO_BASE; - platform_device_register(&uart8250_device); + uart8250_device.dev.platform_data = uart8250_data[mips_machtype]; - return 0; + return platform_device_register(&uart8250_device); } device_initcall(serial_init); diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c new file mode 100644 index 000000000000..233c708fc120 --- /dev/null +++ b/arch/mips/loongson/common/uart_base.c @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +#include + +unsigned long __maybe_unused _loongson_uart_base; +EXPORT_SYMBOL(_loongson_uart_base); + +unsigned long __maybe_unused uart8250_base[] = { + [MACH_LOONGSON_UNKNOWN] 0, + [MACH_LEMOTE_FL2E] (LOONGSON_PCIIO_BASE + 0x3f8), + [MACH_LEMOTE_FL2F] (LOONGSON_PCIIO_BASE + 0x2f8), + [MACH_LEMOTE_ML2F7] (LOONGSON_LIO1_BASE + 0x3f8), + [MACH_LEMOTE_YL2F89] (LOONGSON_LIO1_BASE + 0x3f8), + [MACH_DEXXON_GDIUM2F10] (LOONGSON_LIO1_BASE + 0x3f8), + [MACH_LOONGSON_END] 0, +}; +EXPORT_SYMBOL(uart8250_base); + +void __maybe_unused prom_init_uart_base(void) +{ + _loongson_uart_base = + (unsigned long)ioremap_nocache(uart8250_base[mips_machtype], 8); +} -- GitLab From 937893cf5be53203eabc6f4db29f86b1fdeea203 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 6 Nov 2009 18:45:06 +0800 Subject: [PATCH 210/618] MIPS: oprofile: Only do performance counter handling for counter interrupts In Loongson2f IP6 is shared by bonito and perfcounters so we need to avoid do_IRQ for perfcounter when the interrupt is from bonito. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- arch/mips/oprofile/op_model_loongson2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c index 575cd1473475..475ff46712ab 100644 --- a/arch/mips/oprofile/op_model_loongson2.c +++ b/arch/mips/oprofile/op_model_loongson2.c @@ -1,7 +1,7 @@ /* * Loongson2 performance counter driver for oprofile * - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (C) 2009 Lemote Inc. * Author: Yanhua * Author: Wu Zhangjin * @@ -125,6 +125,9 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id) */ /* Check whether the irq belongs to me */ + enabled = read_c0_perfcnt() & LOONGSON2_PERFCNT_INT_EN; + if (!enabled) + return IRQ_NONE; enabled = reg.cnt1_enabled | reg.cnt2_enabled; if (!enabled) return IRQ_NONE; -- GitLab From 6f7a251a259e5bf58a9ff334bdcfa3e42b6cb7a3 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 6 Nov 2009 18:45:05 +0800 Subject: [PATCH 211/618] MIPS: Loongson: Add basic Loongson 2F support Loongson 2F has built-in DDR2 and PCI-X controller. The PCI-X controller has a programming interface similiar to the the FPGA northbridge used on Loongson 2E. The main differences between Loongson 2E and Loongson 2F include: 1. Loongson 2F has an extra address window configuration module, which is used to map CPU address space to DDR or PCI address space, or map the PCI-DMA address space to DDR or LIO address space. 2. Loongson 2F supports 8 levels of software configurable CPu frequency which can be configured in the LOONGSON_CHIPCFG0 register. The coming cpufreq and standby support are based on this feature. Loongson.h abstracts the modules and corresponding methods are abstracted. Add other Loongson-2F-specific source code including gcc 4.4 support, PCI memory space, PCI IO space, DMA address. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 18 ++++ arch/mips/Makefile | 2 + .../include/asm/mach-loongson/dma-coherence.h | 4 + .../mips/include/asm/mach-loongson/loongson.h | 84 ++++++++++++++++++- arch/mips/include/asm/mach-loongson/mem.h | 27 ++++-- arch/mips/include/asm/mach-loongson/pci.h | 28 ++++++- arch/mips/loongson/common/bonito-irq.c | 5 +- arch/mips/loongson/common/init.c | 8 ++ arch/mips/loongson/common/mem.c | 33 ++++++-- arch/mips/loongson/common/pci.c | 8 ++ 10 files changed, 197 insertions(+), 20 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a16b6dfe3bc3..9618451011e1 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1073,6 +1073,21 @@ config CPU_LOONGSON2E The Loongson 2E processor implements the MIPS III instruction set with many extensions. + It has an internal FPGA northbridge, which is compatiable to + bonito64. + +config CPU_LOONGSON2F + bool "Loongson 2F" + depends on SYS_HAS_CPU_LOONGSON2F + select CPU_LOONGSON2 + help + The Loongson 2F processor implements the MIPS III instruction set + with many extensions. + + Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller + have a similar programming interface with FPGA northbridge used in + Loongson2E. + config CPU_MIPS32_R1 bool "MIPS32 Release 1" depends on SYS_HAS_CPU_MIPS32_R1 @@ -1317,6 +1332,9 @@ config CPU_LOONGSON2 config SYS_HAS_CPU_LOONGSON2E bool +config SYS_HAS_CPU_LOONGSON2F + bool + config SYS_HAS_CPU_MIPS32_R1 bool diff --git a/arch/mips/Makefile b/arch/mips/Makefile index ba04782c4b91..47ecded20902 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -125,6 +125,8 @@ cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap cflags-$(CONFIG_CPU_LOONGSON2E) += \ $(call cc-option,-march=loongson2e,-march=r4600) +cflags-$(CONFIG_CPU_LOONGSON2F) += \ + $(call cc-option,-march=loongson2f,-march=r4600) cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32 -Wa,--trap diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h index 71a6851ba833..981c75f91a7d 100644 --- a/arch/mips/include/asm/mach-loongson/dma-coherence.h +++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h @@ -28,7 +28,11 @@ static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, static inline unsigned long plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr) { +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT) + return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff); +#else return dma_addr & 0x7fffffff; +#endif } static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index 722db9e811e5..62171f240c7b 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin * * This program is free software; you can redistribute it and/or modify it @@ -219,4 +219,86 @@ extern void mach_irq_dispatch(unsigned int pending); #define LOONGSON_PCIMAP_WIN(WIN, ADDR) \ ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) +/* Chip Config */ +#ifdef CONFIG_CPU_LOONGSON2F +#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80) +#endif + +/* + * address windows configuration module + * + * loongson2e do not have this module + */ +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT) + +/* address window config module base address */ +#define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul +#define LOONGSON_ADDRWINCFG_SIZE 0x180 + +extern unsigned long _loongson_addrwincfg_base; +#define LOONGSON_ADDRWINCFG(offset) \ + (*(volatile u64 *)(_loongson_addrwincfg_base + (offset))) + +#define CPU_WIN0_BASE LOONGSON_ADDRWINCFG(0x00) +#define CPU_WIN1_BASE LOONGSON_ADDRWINCFG(0x08) +#define CPU_WIN2_BASE LOONGSON_ADDRWINCFG(0x10) +#define CPU_WIN3_BASE LOONGSON_ADDRWINCFG(0x18) + +#define CPU_WIN0_MASK LOONGSON_ADDRWINCFG(0x20) +#define CPU_WIN1_MASK LOONGSON_ADDRWINCFG(0x28) +#define CPU_WIN2_MASK LOONGSON_ADDRWINCFG(0x30) +#define CPU_WIN3_MASK LOONGSON_ADDRWINCFG(0x38) + +#define CPU_WIN0_MMAP LOONGSON_ADDRWINCFG(0x40) +#define CPU_WIN1_MMAP LOONGSON_ADDRWINCFG(0x48) +#define CPU_WIN2_MMAP LOONGSON_ADDRWINCFG(0x50) +#define CPU_WIN3_MMAP LOONGSON_ADDRWINCFG(0x58) + +#define PCIDMA_WIN0_BASE LOONGSON_ADDRWINCFG(0x60) +#define PCIDMA_WIN1_BASE LOONGSON_ADDRWINCFG(0x68) +#define PCIDMA_WIN2_BASE LOONGSON_ADDRWINCFG(0x70) +#define PCIDMA_WIN3_BASE LOONGSON_ADDRWINCFG(0x78) + +#define PCIDMA_WIN0_MASK LOONGSON_ADDRWINCFG(0x80) +#define PCIDMA_WIN1_MASK LOONGSON_ADDRWINCFG(0x88) +#define PCIDMA_WIN2_MASK LOONGSON_ADDRWINCFG(0x90) +#define PCIDMA_WIN3_MASK LOONGSON_ADDRWINCFG(0x98) + +#define PCIDMA_WIN0_MMAP LOONGSON_ADDRWINCFG(0xa0) +#define PCIDMA_WIN1_MMAP LOONGSON_ADDRWINCFG(0xa8) +#define PCIDMA_WIN2_MMAP LOONGSON_ADDRWINCFG(0xb0) +#define PCIDMA_WIN3_MMAP LOONGSON_ADDRWINCFG(0xb8) + +#define ADDRWIN_WIN0 0 +#define ADDRWIN_WIN1 1 +#define ADDRWIN_WIN2 2 +#define ADDRWIN_WIN3 3 + +#define ADDRWIN_MAP_DST_DDR 0 +#define ADDRWIN_MAP_DST_PCI 1 +#define ADDRWIN_MAP_DST_LIO 1 + +/* + * s: CPU, PCIDMA + * d: DDR, PCI, LIO + * win: 0, 1, 2, 3 + * src: map source + * dst: map destination + * size: ~mask + 1 + */ +#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\ + s##_WIN##w##_BASE = (src); \ + s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \ + s##_WIN##w##_MASK = ~(size-1); \ +} while (0) + +#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size) +#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size) +#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size) + +#endif /* ! CONFIG_CPU_LOONGSON2F && CONFIG_64BIT */ + #endif /* __ASM_MACH_LOONGSON_LOONGSON_H */ diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson/mem.h index bd7b3cba7e35..e9960f341b96 100644 --- a/arch/mips/include/asm/mach-loongson/mem.h +++ b/arch/mips/include/asm/mach-loongson/mem.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin * * This program is free software; you can redistribute it and/or modify it @@ -12,19 +12,30 @@ #define __ASM_MACH_LOONGSON_MEM_H /* - * On Lemote Loongson 2e + * high memory space * - * the high memory space starts from 512M. - * the peripheral registers reside between 0x1000:0000 and 0x2000:0000. + * in loongson2e, starts from 512M + * in loongson2f, starts from 2G 256M */ +#ifdef CONFIG_CPU_LOONGSON2E +#define LOONGSON_HIGHMEM_START 0x20000000 +#else +#define LOONGSON_HIGHMEM_START 0x90000000 +#endif -#ifdef CONFIG_LEMOTE_FULOONG2E - -#define LOONGSON_HIGHMEM_START 0x20000000 +/* + * the peripheral registers(MMIO): + * + * On the Lemote Loongson 2e system, reside between 0x1000:0000 and 0x2000:0000. + * On the Lemote Loongson 2f system, reside between 0x1000:0000 and 0x8000:0000. + */ #define LOONGSON_MMIO_MEM_START 0x10000000 -#define LOONGSON_MMIO_MEM_END 0x20000000 +#ifdef CONFIG_CPU_LOONGSON2E +#define LOONGSON_MMIO_MEM_END 0x20000000 +#else +#define LOONGSON_MMIO_MEM_END 0x80000000 #endif #endif /* __ASM_MACH_LOONGSON_MEM_H */ diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson/pci.h index 576487c00470..31ba90891ec0 100644 --- a/arch/mips/include/asm/mach-loongson/pci.h +++ b/arch/mips/include/asm/mach-loongson/pci.h @@ -1,5 +1,6 @@ /* * Copyright (c) 2008 Zhang Le + * Copyright (c) 2009 Wu Zhangjin * * This program is free software; you can redistribute it * and/or modify it under the terms of the GNU General @@ -24,7 +25,30 @@ extern struct pci_ops loongson_pci_ops; -#ifdef CONFIG_LEMOTE_FULOONG2E +/* this is an offset from mips_io_port_base */ +#define LOONGSON_PCI_IO_START 0x00004000UL + +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT) + +/* + * we use address window2 to map cpu address space to pci space + * window2: cpu [1G, 2G] -> pci [1G, 2G] + * why not use window 0 & 1? because they are used by cpu when booting. + * window0: cpu [0, 256M] -> ddr [0, 256M] + * window1: cpu [256M, 512M] -> pci [256M, 512M] + */ + +/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */ +#define LOONGSON_CPU_MEM_SRC 0x40000000ul /* 1G */ +#define LOONGSON_PCI_MEM_DST LOONGSON_CPU_MEM_SRC + +#define LOONGSON_PCI_MEM_START LOONGSON_PCI_MEM_DST +#define LOONGSON_PCI_MEM_END (0x80000000ul-1) /* 2G */ + +#define MMAP_CPUTOPCI_SIZE (LOONGSON_PCI_MEM_END - \ + LOONGSON_PCI_MEM_START + 1) + +#else /* loongson2f/32bit & loongson2e */ /* this pci memory space is mapped by pcimap in pci.c */ #define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE @@ -32,6 +56,6 @@ extern struct pci_ops loongson_pci_ops; /* this is an offset from mips_io_port_base */ #define LOONGSON_PCI_IO_START 0x00004000UL -#endif +#endif /* !(defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT))*/ #endif /* !__ASM_MACH_LOONGSON_PCI_H_ */ diff --git a/arch/mips/loongson/common/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c index a1cbd110a6e4..2dc2a4cc632a 100644 --- a/arch/mips/loongson/common/bonito-irq.c +++ b/arch/mips/loongson/common/bonito-irq.c @@ -12,6 +12,7 @@ * option) any later version. */ #include +#include #include @@ -35,7 +36,7 @@ static struct irq_chip bonito_irq_type = { .unmask = bonito_irq_enable, }; -static struct irqaction dma_timeout_irqaction = { +static struct irqaction __maybe_unused dma_timeout_irqaction = { .handler = no_action, .name = "dma_timeout", }; @@ -47,5 +48,7 @@ void bonito_irq_init(void) for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++) set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq); +#ifdef CONFIG_CPU_LOONGSON2E setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction); +#endif } diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c index 3b1dbc1ca242..743d3571f010 100644 --- a/arch/mips/loongson/common/init.c +++ b/arch/mips/loongson/common/init.c @@ -12,12 +12,20 @@ #include +/* Loongson CPU address windows config space base address */ +unsigned long __maybe_unused _loongson_addrwincfg_base; + void __init prom_init(void) { /* init base address of io space */ set_io_port_base((unsigned long) ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT) + _loongson_addrwincfg_base = (unsigned long) + ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE); +#endif + prom_init_cmdline(); prom_init_env(); prom_init_memory(); diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c index 3f7f153b1974..e93551dbc9ea 100644 --- a/arch/mips/loongson/common/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -21,14 +21,31 @@ void __init prom_init_memory(void) add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << 20), BOOT_MEM_RESERVED); #ifdef CONFIG_64BIT - if (highmemsize > 0) - add_memory_region(LOONGSON_HIGHMEM_START, - highmemsize << 20, BOOT_MEM_RAM); - - add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - - LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); - -#endif /* CONFIG_64BIT */ +#ifdef CONFIG_CPU_LOONGSON2F + { + int bit; + + bit = fls(memsize + highmemsize); + if (bit != ffs(memsize + highmemsize)) + bit += 20; + else + bit = bit + 20 - 1; + + /* set cpu window3 to map CPU to DDR: 2G -> 2G */ + LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul, + 0x80000000ul, (1 << bit)); + mmiowb(); + } +#endif /* CONFIG_CPU_LOONGSON2F */ + + if (highmemsize > 0) + add_memory_region(LOONGSON_HIGHMEM_START, + highmemsize << 20, BOOT_MEM_RAM); + + add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - + LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); + +#endif /* CONFIG_64BIT */ } /* override of arch/mips/mm/cache.c: __uncached_access */ diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c index a7eb8b9c44ee..eac43b8f695e 100644 --- a/arch/mips/loongson/common/pci.c +++ b/arch/mips/loongson/common/pci.c @@ -67,6 +67,14 @@ static void __init setup_pcimap(void) /* can not change gnt to break pci transfer when device's gnt not deassert for some broken device */ LOONGSON_PXARB_CFG = 0x00fe0105ul; + +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT) + /* + * set cpu addr window2 to map CPU address space to PCI address space + */ + LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC, + LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE); +#endif } static int __init pcibios_init(void) -- GitLab From 7d32c6dd816bb0c595aef62294b714a9b8a0f864 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 10 Nov 2009 00:06:10 +0800 Subject: [PATCH 212/618] MIPS: Lemote 2F: Add a LEMOTE_MACH2F kernel option Add a new kernel option for Lemote Loongson 2F family machines. Lemote loongson2f family machines utilize the 2f revision of loongson processor and the AMD CS5536 south bridge. Family members include Fuloong 2F mini PC, Yeeloong 2F notebook, LingLoong all-in-one PC and others. Signed-off-by: Wu Zhangjin Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire Cc: Arnaud Patard Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 1 + arch/mips/include/asm/mach-loongson/machine.h | 7 +++++ arch/mips/loongson/Kconfig | 29 +++++++++++++++++++ 3 files changed, 37 insertions(+) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 47ecded20902..184d5beb278d 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -327,6 +327,7 @@ core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/ cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \ -mno-branch-likely load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000 +load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000 # # MIPS Malta board diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h index d2f586157630..acf8359cb135 100644 --- a/arch/mips/include/asm/mach-loongson/machine.h +++ b/arch/mips/include/asm/mach-loongson/machine.h @@ -17,4 +17,11 @@ #endif +/* use fuloong2f as the default machine of LEMOTE_MACH2F */ +#ifdef CONFIG_LEMOTE_MACH2F + +#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2F + +#endif + #endif /* __ASM_MACH_LOONGSON_MACHINE_H */ diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index 818a0289711c..3100237b3f10 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -28,4 +28,33 @@ config LEMOTE_FULOONG2E an FPGA northbridge Lemote Fuloong(2e) mini PC have a VIA686B south bridge. + +config LEMOTE_MACH2F + bool "Lemote Loongson 2F family machines" + select ARCH_SPARSEMEM_ENABLE + select BOARD_SCACHE + select BOOT_ELF32 + select CEVT_R4K + select CPU_HAS_WB + select CS5536 + select CSRC_R4K + select DMA_NONCOHERENT + select GENERIC_HARDIRQS_NO__DO_IRQ + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select HW_HAS_PCI + select I8259 + select IRQ_CPU + select ISA + select SYS_HAS_CPU_LOONGSON2F + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + help + Lemote Loongson 2F family machines utilize the 2F revision of + Loongson processor and the AMD CS5536 south bridge. + + These family machines include fuloong2f mini PC, yeeloong2f notebook, + LingLoong allinone PC and so forth. endchoice -- GitLab From 21a41faa4d59716dac0169a48565109b9e5bf0ea Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 10 Nov 2009 00:06:11 +0800 Subject: [PATCH 213/618] MIPS: Lemote 2f: Enable legacy RTC driver Currently rtclib is not available on Loongson family machines but the legacy RTC driver works well on them. Deselect RTC_LIB to allow the legacy RTC driver to be selected. The rtclib patch series http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=a91e34bf2595157830d599cb66becd52247b1819.1257383766.git.wuzhangjin%40gmail.com or, in patchworks: http://patchwork.linux-mips.org/patch/570/ http://patchwork.linux-mips.org/patch/571/ http://patchwork.linux-mips.org/patch/572/ is eventually going to switch Lemote platforms to rtclib. Signed-off-by: Wu Zhangjin Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire Cc: Arnaud Patard Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 9618451011e1..c2b4cd511419 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -7,7 +7,7 @@ config MIPS select HAVE_ARCH_KGDB # Horrible source of confusion. Die, die, die ... select EMBEDDED - select RTC_LIB if !LEMOTE_FULOONG2E + select RTC_LIB if !MACH_LOONGSON mainmenu "Linux/MIPS Kernel Configuration" -- GitLab From 22c21003a91b543d82e87ef2e5195b888b5b9575 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 10 Nov 2009 00:06:12 +0800 Subject: [PATCH 214/618] MIPS: Lemote 2F: Add basic CS5536 VSM support Lemote Loongson 2F family machines use CS5536 as their south bridge and need these lowlevel interfaces to access the devices on CS5536. Virtualize the legacy devices on CS5536 as PCI devices. This way users can access the CS5536 PCI config space directly as a normal multi-function PCI 2.2 device. Signed-off-by: Wu Zhangjin Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire Cc: Arnaud Patard Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- .../include/asm/mach-loongson/cs5536/cs5536.h | 305 +++++++++++++++++ .../asm/mach-loongson/cs5536/cs5536_pci.h | 153 +++++++++ .../asm/mach-loongson/cs5536/cs5536_vsm.h | 31 ++ arch/mips/loongson/Kconfig | 3 + arch/mips/loongson/common/Makefile | 6 + arch/mips/loongson/common/cs5536/Makefile | 8 + arch/mips/loongson/common/cs5536/cs5536_acc.c | 140 ++++++++ .../mips/loongson/common/cs5536/cs5536_ehci.c | 158 +++++++++ arch/mips/loongson/common/cs5536/cs5536_ide.c | 179 ++++++++++ arch/mips/loongson/common/cs5536/cs5536_isa.c | 316 ++++++++++++++++++ .../mips/loongson/common/cs5536/cs5536_ohci.c | 147 ++++++++ arch/mips/loongson/common/cs5536/cs5536_pci.c | 87 +++++ 12 files changed, 1533 insertions(+) create mode 100644 arch/mips/include/asm/mach-loongson/cs5536/cs5536.h create mode 100644 arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h create mode 100644 arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h create mode 100644 arch/mips/loongson/common/cs5536/Makefile create mode 100644 arch/mips/loongson/common/cs5536/cs5536_acc.c create mode 100644 arch/mips/loongson/common/cs5536/cs5536_ehci.c create mode 100644 arch/mips/loongson/common/cs5536/cs5536_ide.c create mode 100644 arch/mips/loongson/common/cs5536/cs5536_isa.c create mode 100644 arch/mips/loongson/common/cs5536/cs5536_ohci.c create mode 100644 arch/mips/loongson/common/cs5536/cs5536_pci.c diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h new file mode 100644 index 000000000000..021f77ca59ec --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h @@ -0,0 +1,305 @@ +/* + * The header file of cs5536 sourth bridge. + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu + */ + +#ifndef _CS5536_H +#define _CS5536_H + +#include + +extern void _rdmsr(u32 msr, u32 *hi, u32 *lo); +extern void _wrmsr(u32 msr, u32 hi, u32 lo); + +/* + * MSR module base + */ +#define CS5536_SB_MSR_BASE (0x00000000) +#define CS5536_GLIU_MSR_BASE (0x10000000) +#define CS5536_ILLEGAL_MSR_BASE (0x20000000) +#define CS5536_USB_MSR_BASE (0x40000000) +#define CS5536_IDE_MSR_BASE (0x60000000) +#define CS5536_DIVIL_MSR_BASE (0x80000000) +#define CS5536_ACC_MSR_BASE (0xa0000000) +#define CS5536_UNUSED_MSR_BASE (0xc0000000) +#define CS5536_GLCP_MSR_BASE (0xe0000000) + +#define SB_MSR_REG(offset) (CS5536_SB_MSR_BASE | (offset)) +#define GLIU_MSR_REG(offset) (CS5536_GLIU_MSR_BASE | (offset)) +#define ILLEGAL_MSR_REG(offset) (CS5536_ILLEGAL_MSR_BASE | (offset)) +#define USB_MSR_REG(offset) (CS5536_USB_MSR_BASE | (offset)) +#define IDE_MSR_REG(offset) (CS5536_IDE_MSR_BASE | (offset)) +#define DIVIL_MSR_REG(offset) (CS5536_DIVIL_MSR_BASE | (offset)) +#define ACC_MSR_REG(offset) (CS5536_ACC_MSR_BASE | (offset)) +#define UNUSED_MSR_REG(offset) (CS5536_UNUSED_MSR_BASE | (offset)) +#define GLCP_MSR_REG(offset) (CS5536_GLCP_MSR_BASE | (offset)) + +/* + * BAR SPACE OF VIRTUAL PCI : + * range for pci probe use, length is the actual size. + */ +/* IO space for all DIVIL modules */ +#define CS5536_IRQ_RANGE 0xffffffe0 /* USERD FOR PCI PROBE */ +#define CS5536_IRQ_LENGTH 0x20 /* THE REGS ACTUAL LENGTH */ +#define CS5536_SMB_RANGE 0xfffffff8 +#define CS5536_SMB_LENGTH 0x08 +#define CS5536_GPIO_RANGE 0xffffff00 +#define CS5536_GPIO_LENGTH 0x100 +#define CS5536_MFGPT_RANGE 0xffffffc0 +#define CS5536_MFGPT_LENGTH 0x40 +#define CS5536_ACPI_RANGE 0xffffffe0 +#define CS5536_ACPI_LENGTH 0x20 +#define CS5536_PMS_RANGE 0xffffff80 +#define CS5536_PMS_LENGTH 0x80 +/* IO space for IDE */ +#define CS5536_IDE_RANGE 0xfffffff0 +#define CS5536_IDE_LENGTH 0x10 +/* IO space for ACC */ +#define CS5536_ACC_RANGE 0xffffff80 +#define CS5536_ACC_LENGTH 0x80 +/* MEM space for ALL USB modules */ +#define CS5536_OHCI_RANGE 0xfffff000 +#define CS5536_OHCI_LENGTH 0x1000 +#define CS5536_EHCI_RANGE 0xfffff000 +#define CS5536_EHCI_LENGTH 0x1000 + +/* + * PCI MSR ACCESS + */ +#define PCI_MSR_CTRL 0xF0 +#define PCI_MSR_ADDR 0xF4 +#define PCI_MSR_DATA_LO 0xF8 +#define PCI_MSR_DATA_HI 0xFC + +/**************** MSR *****************************/ + +/* + * GLIU STANDARD MSR + */ +#define GLIU_CAP 0x00 +#define GLIU_CONFIG 0x01 +#define GLIU_SMI 0x02 +#define GLIU_ERROR 0x03 +#define GLIU_PM 0x04 +#define GLIU_DIAG 0x05 + +/* + * GLIU SPEC. MSR + */ +#define GLIU_P2D_BM0 0x20 +#define GLIU_P2D_BM1 0x21 +#define GLIU_P2D_BM2 0x22 +#define GLIU_P2D_BMK0 0x23 +#define GLIU_P2D_BMK1 0x24 +#define GLIU_P2D_BM3 0x25 +#define GLIU_P2D_BM4 0x26 +#define GLIU_COH 0x80 +#define GLIU_PAE 0x81 +#define GLIU_ARB 0x82 +#define GLIU_ASMI 0x83 +#define GLIU_AERR 0x84 +#define GLIU_DEBUG 0x85 +#define GLIU_PHY_CAP 0x86 +#define GLIU_NOUT_RESP 0x87 +#define GLIU_NOUT_WDATA 0x88 +#define GLIU_WHOAMI 0x8B +#define GLIU_SLV_DIS 0x8C +#define GLIU_IOD_BM0 0xE0 +#define GLIU_IOD_BM1 0xE1 +#define GLIU_IOD_BM2 0xE2 +#define GLIU_IOD_BM3 0xE3 +#define GLIU_IOD_BM4 0xE4 +#define GLIU_IOD_BM5 0xE5 +#define GLIU_IOD_BM6 0xE6 +#define GLIU_IOD_BM7 0xE7 +#define GLIU_IOD_BM8 0xE8 +#define GLIU_IOD_BM9 0xE9 +#define GLIU_IOD_SC0 0xEA +#define GLIU_IOD_SC1 0xEB +#define GLIU_IOD_SC2 0xEC +#define GLIU_IOD_SC3 0xED +#define GLIU_IOD_SC4 0xEE +#define GLIU_IOD_SC5 0xEF +#define GLIU_IOD_SC6 0xF0 +#define GLIU_IOD_SC7 0xF1 + +/* + * SB STANDARD + */ +#define SB_CAP 0x00 +#define SB_CONFIG 0x01 +#define SB_SMI 0x02 +#define SB_ERROR 0x03 +#define SB_MAR_ERR_EN 0x00000001 +#define SB_TAR_ERR_EN 0x00000002 +#define SB_RSVD_BIT1 0x00000004 +#define SB_EXCEP_ERR_EN 0x00000008 +#define SB_SYSE_ERR_EN 0x00000010 +#define SB_PARE_ERR_EN 0x00000020 +#define SB_TAS_ERR_EN 0x00000040 +#define SB_MAR_ERR_FLAG 0x00010000 +#define SB_TAR_ERR_FLAG 0x00020000 +#define SB_RSVD_BIT2 0x00040000 +#define SB_EXCEP_ERR_FLAG 0x00080000 +#define SB_SYSE_ERR_FLAG 0x00100000 +#define SB_PARE_ERR_FLAG 0x00200000 +#define SB_TAS_ERR_FLAG 0x00400000 +#define SB_PM 0x04 +#define SB_DIAG 0x05 + +/* + * SB SPEC. + */ +#define SB_CTRL 0x10 +#define SB_R0 0x20 +#define SB_R1 0x21 +#define SB_R2 0x22 +#define SB_R3 0x23 +#define SB_R4 0x24 +#define SB_R5 0x25 +#define SB_R6 0x26 +#define SB_R7 0x27 +#define SB_R8 0x28 +#define SB_R9 0x29 +#define SB_R10 0x2A +#define SB_R11 0x2B +#define SB_R12 0x2C +#define SB_R13 0x2D +#define SB_R14 0x2E +#define SB_R15 0x2F + +/* + * GLCP STANDARD + */ +#define GLCP_CAP 0x00 +#define GLCP_CONFIG 0x01 +#define GLCP_SMI 0x02 +#define GLCP_ERROR 0x03 +#define GLCP_PM 0x04 +#define GLCP_DIAG 0x05 + +/* + * GLCP SPEC. + */ +#define GLCP_CLK_DIS_DELAY 0x08 +#define GLCP_PM_CLK_DISABLE 0x09 +#define GLCP_GLB_PM 0x0B +#define GLCP_DBG_OUT 0x0C +#define GLCP_RSVD1 0x0D +#define GLCP_SOFT_COM 0x0E +#define SOFT_BAR_SMB_FLAG 0x00000001 +#define SOFT_BAR_GPIO_FLAG 0x00000002 +#define SOFT_BAR_MFGPT_FLAG 0x00000004 +#define SOFT_BAR_IRQ_FLAG 0x00000008 +#define SOFT_BAR_PMS_FLAG 0x00000010 +#define SOFT_BAR_ACPI_FLAG 0x00000020 +#define SOFT_BAR_IDE_FLAG 0x00000400 +#define SOFT_BAR_ACC_FLAG 0x00000800 +#define SOFT_BAR_OHCI_FLAG 0x00001000 +#define SOFT_BAR_EHCI_FLAG 0x00002000 +#define GLCP_RSVD2 0x0F +#define GLCP_CLK_OFF 0x10 +#define GLCP_CLK_ACTIVE 0x11 +#define GLCP_CLK_DISABLE 0x12 +#define GLCP_CLK4ACK 0x13 +#define GLCP_SYS_RST 0x14 +#define GLCP_RSVD3 0x15 +#define GLCP_DBG_CLK_CTRL 0x16 +#define GLCP_CHIP_REV_ID 0x17 + +/* PIC */ +#define PIC_YSEL_LOW 0x20 +#define PIC_YSEL_LOW_USB_SHIFT 8 +#define PIC_YSEL_LOW_ACC_SHIFT 16 +#define PIC_YSEL_LOW_FLASH_SHIFT 24 +#define PIC_YSEL_HIGH 0x21 +#define PIC_ZSEL_LOW 0x22 +#define PIC_ZSEL_HIGH 0x23 +#define PIC_IRQM_PRIM 0x24 +#define PIC_IRQM_LPC 0x25 +#define PIC_XIRR_STS_LOW 0x26 +#define PIC_XIRR_STS_HIGH 0x27 +#define PCI_SHDW 0x34 + +/* + * DIVIL STANDARD + */ +#define DIVIL_CAP 0x00 +#define DIVIL_CONFIG 0x01 +#define DIVIL_SMI 0x02 +#define DIVIL_ERROR 0x03 +#define DIVIL_PM 0x04 +#define DIVIL_DIAG 0x05 + +/* + * DIVIL SPEC. + */ +#define DIVIL_LBAR_IRQ 0x08 +#define DIVIL_LBAR_KEL 0x09 +#define DIVIL_LBAR_SMB 0x0B +#define DIVIL_LBAR_GPIO 0x0C +#define DIVIL_LBAR_MFGPT 0x0D +#define DIVIL_LBAR_ACPI 0x0E +#define DIVIL_LBAR_PMS 0x0F +#define DIVIL_LEG_IO 0x14 +#define DIVIL_BALL_OPTS 0x15 +#define DIVIL_SOFT_IRQ 0x16 +#define DIVIL_SOFT_RESET 0x17 + +/* MFGPT */ +#define MFGPT_IRQ 0x28 + +/* + * IDE STANDARD + */ +#define IDE_CAP 0x00 +#define IDE_CONFIG 0x01 +#define IDE_SMI 0x02 +#define IDE_ERROR 0x03 +#define IDE_PM 0x04 +#define IDE_DIAG 0x05 + +/* + * IDE SPEC. + */ +#define IDE_IO_BAR 0x08 +#define IDE_CFG 0x10 +#define IDE_DTC 0x12 +#define IDE_CAST 0x13 +#define IDE_ETC 0x14 +#define IDE_INTERNAL_PM 0x15 + +/* + * ACC STANDARD + */ +#define ACC_CAP 0x00 +#define ACC_CONFIG 0x01 +#define ACC_SMI 0x02 +#define ACC_ERROR 0x03 +#define ACC_PM 0x04 +#define ACC_DIAG 0x05 + +/* + * USB STANDARD + */ +#define USB_CAP 0x00 +#define USB_CONFIG 0x01 +#define USB_SMI 0x02 +#define USB_ERROR 0x03 +#define USB_PM 0x04 +#define USB_DIAG 0x05 + +/* + * USB SPEC. + */ +#define USB_OHCI 0x08 +#define USB_EHCI 0x09 + +/****************** NATIVE ***************************/ +/* GPIO : I/O SPACE; REG : 32BITS */ +#define GPIOL_OUT_VAL 0x00 +#define GPIOL_OUT_EN 0x04 + +#endif /* _CS5536_H */ diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h new file mode 100644 index 000000000000..0dca9c89ee7c --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h @@ -0,0 +1,153 @@ +/* + * the definition file of cs5536 Virtual Support Module(VSM). + * pci configuration space can be accessed through the VSM, so + * there is no need of the MSR read/write now, except the spec. + * MSR registers which are not implemented yet. + * + * Copyright (C) 2007 Lemote Inc. + * Author : jlliu, liujl@lemote.com + */ + +#ifndef _CS5536_PCI_H +#define _CS5536_PCI_H + +#include +#include + +extern void cs5536_pci_conf_write4(int function, int reg, u32 value); +extern u32 cs5536_pci_conf_read4(int function, int reg); + +#define CS5536_ACC_INTR 9 +#define CS5536_IDE_INTR 14 +#define CS5536_USB_INTR 11 +#define CS5536_MFGPT_INTR 5 +#define CS5536_UART1_INTR 4 +#define CS5536_UART2_INTR 3 + +/************** PCI BUS DEVICE FUNCTION ***************/ + +/* + * PCI bus device function + */ +#define PCI_BUS_CS5536 0 +#define PCI_IDSEL_CS5536 14 + +/********** STANDARD PCI-2.2 EXPANSION ****************/ + +/* + * PCI configuration space + * we have to virtualize the PCI configure space head, so we should + * define the necessary IDs and some others. + */ + +/* CONFIG of PCI VENDOR ID*/ +#define CFG_PCI_VENDOR_ID(mod_dev_id, sys_vendor_id) \ + (((mod_dev_id) << 16) | (sys_vendor_id)) + +/* VENDOR ID */ +#define CS5536_VENDOR_ID 0x1022 + +/* DEVICE ID */ +#define CS5536_ISA_DEVICE_ID 0x2090 +#define CS5536_IDE_DEVICE_ID 0x209a +#define CS5536_ACC_DEVICE_ID 0x2093 +#define CS5536_OHCI_DEVICE_ID 0x2094 +#define CS5536_EHCI_DEVICE_ID 0x2095 + +/* CLASS CODE : CLASS SUB-CLASS INTERFACE */ +#define CS5536_ISA_CLASS_CODE 0x060100 +#define CS5536_IDE_CLASS_CODE 0x010180 +#define CS5536_ACC_CLASS_CODE 0x040100 +#define CS5536_OHCI_CLASS_CODE 0x0C0310 +#define CS5536_EHCI_CLASS_CODE 0x0C0320 + +/* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */ + +#define CFG_PCI_CACHE_LINE_SIZE(header_type, latency_timer) \ + ((PCI_NONE_BIST << 24) | ((header_type) << 16) \ + | ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE); + +#define PCI_NONE_BIST 0x00 /* RO not implemented yet. */ +#define PCI_BRIDGE_HEADER_TYPE 0x80 /* RO */ +#define PCI_NORMAL_HEADER_TYPE 0x00 +#define PCI_NORMAL_LATENCY_TIMER 0x00 +#define PCI_NORMAL_CACHE_LINE_SIZE 0x08 /* RW */ + +/* BAR */ +#define PCI_BAR0_REG 0x10 +#define PCI_BAR1_REG 0x14 +#define PCI_BAR2_REG 0x18 +#define PCI_BAR3_REG 0x1c +#define PCI_BAR4_REG 0x20 +#define PCI_BAR5_REG 0x24 +#define PCI_BAR_COUNT 6 +#define PCI_BAR_RANGE_MASK 0xFFFFFFFF + +/* CARDBUS CIS POINTER */ +#define PCI_CARDBUS_CIS_POINTER 0x00000000 + +/* SUBSYSTEM VENDOR ID */ +#define CS5536_SUB_VENDOR_ID CS5536_VENDOR_ID + +/* SUBSYSTEM ID */ +#define CS5536_ISA_SUB_ID CS5536_ISA_DEVICE_ID +#define CS5536_IDE_SUB_ID CS5536_IDE_DEVICE_ID +#define CS5536_ACC_SUB_ID CS5536_ACC_DEVICE_ID +#define CS5536_OHCI_SUB_ID CS5536_OHCI_DEVICE_ID +#define CS5536_EHCI_SUB_ID CS5536_EHCI_DEVICE_ID + +/* EXPANSION ROM BAR */ +#define PCI_EXPANSION_ROM_BAR 0x00000000 + +/* CAPABILITIES POINTER */ +#define PCI_CAPLIST_POINTER 0x00000000 +#define PCI_CAPLIST_USB_POINTER 0x40 +/* INTERRUPT */ + +#define CFG_PCI_INTERRUPT_LINE(pin, mod_intr) \ + ((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \ + ((pin) << 8) | (mod_intr)) + +#define PCI_MAX_LATENCY 0x40 +#define PCI_MIN_GRANT 0x00 +#define PCI_DEFAULT_PIN 0x01 + +/*********** EXPANSION PCI REG ************************/ + +/* + * ISA EXPANSION + */ +#define PCI_UART1_INT_REG 0x50 +#define PCI_UART2_INT_REG 0x54 +#define PCI_ISA_FIXUP_REG 0x58 + +/* + * IDE EXPANSION + */ +#define PCI_IDE_CFG_REG 0x40 +#define CS5536_IDE_FLASH_SIGNATURE 0xDEADBEEF +#define PCI_IDE_DTC_REG 0x48 +#define PCI_IDE_CAST_REG 0x4C +#define PCI_IDE_ETC_REG 0x50 +#define PCI_IDE_PM_REG 0x54 +#define PCI_IDE_INT_REG 0x60 + +/* + * ACC EXPANSION + */ +#define PCI_ACC_INT_REG 0x50 + +/* + * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI + */ +#define PCI_OHCI_PM_REG 0x40 +#define PCI_OHCI_INT_REG 0x50 + +/* + * EHCI EXPANSION + */ +#define PCI_EHCI_LEGSMIEN_REG 0x50 +#define PCI_EHCI_LEGSMISTS_REG 0x54 +#define PCI_EHCI_FLADJ_REG 0x60 + +#endif /* _CS5536_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h new file mode 100644 index 000000000000..6305bea7e18e --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h @@ -0,0 +1,31 @@ +/* + * the read/write interfaces for Virtual Support Module(VSM) + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin + */ + +#ifndef _CS5536_VSM_H +#define _CS5536_VSM_H + +#include + +typedef void (*cs5536_pci_vsm_write)(int reg, u32 value); +typedef u32 (*cs5536_pci_vsm_read)(int reg); + +#define DECLARE_CS5536_MODULE(name) \ +extern void pci_##name##_write_reg(int reg, u32 value); \ +extern u32 pci_##name##_read_reg(int reg); + +/* ide module */ +DECLARE_CS5536_MODULE(ide) +/* acc module */ +DECLARE_CS5536_MODULE(acc) +/* ohci module */ +DECLARE_CS5536_MODULE(ohci) +/* isa module */ +DECLARE_CS5536_MODULE(isa) +/* ehci module */ +DECLARE_CS5536_MODULE(ehci) + +#endif /* _CS5536_VSM_H */ diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index 3100237b3f10..a214127895f2 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -58,3 +58,6 @@ config LEMOTE_MACH2F These family machines include fuloong2f mini PC, yeeloong2f notebook, LingLoong allinone PC and so forth. endchoice + +config CS5536 + bool diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index be6adf7eb825..a82527fdfb65 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -10,3 +10,9 @@ obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ # obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_SERIAL_8250) += serial.o + +# +# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure +# space +# +obj-$(CONFIG_CS5536) += cs5536/ diff --git a/arch/mips/loongson/common/cs5536/Makefile b/arch/mips/loongson/common/cs5536/Makefile new file mode 100644 index 000000000000..31657ee037d8 --- /dev/null +++ b/arch/mips/loongson/common/cs5536/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for CS5536 support. +# + +obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \ + cs5536_isa.o cs5536_ehci.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/loongson/common/cs5536/cs5536_acc.c b/arch/mips/loongson/common/cs5536/cs5536_acc.c new file mode 100644 index 000000000000..b49485f187e0 --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_acc.c @@ -0,0 +1,140 @@ +/* + * the ACC Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +void pci_acc_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + lo |= (0x03 << 8); + else + lo &= ~(0x03 << 8); + _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_ACC_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + value &= 0xfffffffc; + hi = 0xA0000000 | ((value & 0x000ff000) >> 12); + lo = 0x000fff80 | ((value & 0x00000fff) << 20); + _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo); + } + break; + case PCI_ACC_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + /* disable all the usb interrupt in PIC */ + lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT); + if (value) /* enable all the acc interrupt in PIC */ + lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); + break; + default: + break; + } +} + +u32 pci_acc_read_reg(int reg) +{ + u32 hi, lo; + u32 conf_data = 0; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); + if (((lo & 0xfff00000) || (hi & 0x000000ff)) + && ((hi & 0xf0000000) == 0xa0000000)) + conf_data |= PCI_COMMAND_IO; + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if ((lo & 0x300) == 0x300) + conf_data |= PCI_COMMAND_MASTER; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_ACC_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_ACC_FLAG) { + conf_data = CS5536_ACC_RANGE | + PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~SOFT_BAR_ACC_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); + conf_data = (hi & 0x000000ff) << 12; + conf_data |= (lo & 0xfff00000) >> 20; + conf_data |= 0x01; + conf_data &= ~0x02; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR); + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson/common/cs5536/cs5536_ehci.c new file mode 100644 index 000000000000..74f9c59d36af --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_ehci.c @@ -0,0 +1,158 @@ +/* + * the EHCI Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +void pci_ehci_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + hi |= PCI_COMMAND_MASTER; + else + hi &= ~PCI_COMMAND_MASTER; + + if (value & PCI_COMMAND_MEMORY) + hi |= PCI_COMMAND_MEMORY; + else + hi &= ~PCI_COMMAND_MEMORY; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_EHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if ((value & 0x01) == 0x00) { + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + + value &= 0xfffffff0; + hi = 0x40000000 | ((value & 0xff000000) >> 24); + lo = 0x000fffff | ((value & 0x00fff000) << 8); + _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo); + } + break; + case PCI_EHCI_LEGSMIEN_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + hi &= 0x003f0000; + hi |= (value & 0x3f) << 16; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + case PCI_EHCI_FLADJ_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + hi &= ~0x00003f00; + hi |= value & 0x00003f00; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + default: + break; + } +} + +u32 pci_ehci_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + if (hi & PCI_COMMAND_MASTER) + conf_data |= PCI_COMMAND_MASTER; + if (hi & PCI_COMMAND_MEMORY) + conf_data |= PCI_COMMAND_MEMORY; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_EHCI_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_EHCI_FLAG) { + conf_data = CS5536_EHCI_RANGE | + PCI_BASE_ADDRESS_SPACE_MEMORY; + lo &= ~SOFT_BAR_EHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = lo & 0xfffff000; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); + break; + case PCI_EHCI_LEGSMIEN_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = (hi & 0x003f0000) >> 16; + break; + case PCI_EHCI_LEGSMISTS_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = (hi & 0x3f000000) >> 24; + break; + case PCI_EHCI_FLADJ_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = hi & 0x00003f00; + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson/common/cs5536/cs5536_ide.c new file mode 100644 index 000000000000..3f61594b3884 --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_ide.c @@ -0,0 +1,179 @@ +/* + * the IDE Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +void pci_ide_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + lo |= (0x03 << 4); + else + lo &= ~(0x03 << 4); + _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_CACHE_LINE_SIZE: + value &= 0x0000ff00; + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0xffffff00; + hi |= (value >> 8); + _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); + break; + case PCI_BAR4_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_IDE_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + lo = (value & 0xfffffff0) | 0x1; + _wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo); + + value &= 0xfffffffc; + hi = 0x60000000 | ((value & 0x000ff000) >> 12); + lo = 0x000ffff0 | ((value & 0x00000fff) << 20); + _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo); + } + break; + case PCI_IDE_CFG_REG: + if (value == CS5536_IDE_FLASH_SIGNATURE) { + _rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo); + lo |= 0x01; + _wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo); + } else + _wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo); + break; + case PCI_IDE_DTC_REG: + _wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo); + break; + case PCI_IDE_CAST_REG: + _wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo); + break; + case PCI_IDE_ETC_REG: + _wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo); + break; + case PCI_IDE_PM_REG: + _wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo); + break; + default: + break; + } +} + +u32 pci_ide_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); + if (lo & 0xfffffff0) + conf_data |= PCI_COMMAND_IO; + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if ((lo & 0x30) == 0x30) + conf_data |= PCI_COMMAND_MASTER; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_IDE_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0x000000f8; + conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi); + break; + case PCI_BAR4_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_IDE_FLAG) { + conf_data = CS5536_IDE_RANGE | + PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~SOFT_BAR_IDE_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); + conf_data = lo & 0xfffffff0; + conf_data |= 0x01; + conf_data &= ~0x02; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR); + break; + case PCI_IDE_CFG_REG: + _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_DTC_REG: + _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_CAST_REG: + _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_ETC_REG: + _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); + conf_data = lo; + case PCI_IDE_PM_REG: + _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); + conf_data = lo; + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson/common/cs5536/cs5536_isa.c new file mode 100644 index 000000000000..b6f17f538e48 --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_isa.c @@ -0,0 +1,316 @@ +/* + * the ISA Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +/* common variables for PCI_ISA_READ/WRITE_BAR */ +static const u32 divil_msr_reg[6] = { + DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO), + DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ), + DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI), +}; + +static const u32 soft_bar_flag[6] = { + SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG, + SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG, +}; + +static const u32 sb_msr_reg[6] = { + SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2), + SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5), +}; + +static const u32 bar_space_range[6] = { + CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE, + CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE, +}; + +static const int bar_space_len[6] = { + CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH, + CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH, +}; + +/* + * enable the divil module bar space. + * + * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg + * and the RCONFx(0~5) reg to use the modules. + */ +static void divil_lbar_enable(void) +{ + u32 hi, lo; + int offset; + + /* + * The DIVIL IRQ is not used yet. and make the RCONF0 reserved. + */ + + for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { + _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); + hi |= 0x01; + _wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo); + } +} + +/* + * disable the divil module bar space. + */ +static void divil_lbar_disable(void) +{ + u32 hi, lo; + int offset; + + for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { + _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); + hi &= ~0x01; + _wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo); + } +} + +/* + * BAR write: write value to the n BAR + */ + +void pci_isa_write_bar(int n, u32 value) +{ + u32 hi = 0, lo = value; + + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= soft_bar_flag[n]; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + /* NATIVE reg */ + hi = 0x0000f001; + lo &= bar_space_range[n]; + _wrmsr(divil_msr_reg[n], hi, lo); + + /* RCONFx is 4bytes in units for I/O space */ + hi = ((value & 0x000ffffc) << 12) | + ((bar_space_len[n] - 4) << 12) | 0x01; + lo = ((value & 0x000ffffc) << 12) | 0x01; + _wrmsr(sb_msr_reg[n], hi, lo); + } +} + +/* + * BAR read: read the n BAR + */ + +u32 pci_isa_read_bar(int n) +{ + u32 conf_data = 0; + u32 hi, lo; + + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & soft_bar_flag[n]) { + conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~soft_bar_flag[n]; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(divil_msr_reg[n], &hi, &lo); + conf_data = lo & bar_space_range[n]; + conf_data |= 0x01; + conf_data &= ~0x02; + } + return conf_data; +} + +/* + * isa_write: ISA write transfer + * + * We assume that this is not a bus master transfer. + */ +void pci_isa_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + u32 temp; + + switch (reg) { + case PCI_COMMAND: + if (value & PCI_COMMAND_IO) + divil_lbar_enable(); + else + divil_lbar_disable(); + break; + case PCI_STATUS: + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + temp = lo & 0x0000ffff; + if ((value & PCI_STATUS_SIG_TARGET_ABORT) && + (lo & SB_TAS_ERR_EN)) + temp |= SB_TAS_ERR_FLAG; + + if ((value & PCI_STATUS_REC_TARGET_ABORT) && + (lo & SB_TAR_ERR_EN)) + temp |= SB_TAR_ERR_FLAG; + + if ((value & PCI_STATUS_REC_MASTER_ABORT) + && (lo & SB_MAR_ERR_EN)) + temp |= SB_MAR_ERR_FLAG; + + if ((value & PCI_STATUS_DETECTED_PARITY) + && (lo & SB_PARE_ERR_EN)) + temp |= SB_PARE_ERR_FLAG; + + lo = temp; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + break; + case PCI_CACHE_LINE_SIZE: + value &= 0x0000ff00; + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0xffffff00; + hi |= (value >> 8); + _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); + break; + case PCI_BAR0_REG: + pci_isa_write_bar(0, value); + break; + case PCI_BAR1_REG: + pci_isa_write_bar(1, value); + break; + case PCI_BAR2_REG: + pci_isa_write_bar(2, value); + break; + case PCI_BAR3_REG: + pci_isa_write_bar(3, value); + break; + case PCI_BAR4_REG: + pci_isa_write_bar(4, value); + break; + case PCI_BAR5_REG: + pci_isa_write_bar(5, value); + break; + case PCI_UART1_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); + /* disable uart1 interrupt in PIC */ + lo &= ~(0xf << 24); + if (value) /* enable uart1 interrupt in PIC */ + lo |= (CS5536_UART1_INTR << 24); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); + break; + case PCI_UART2_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); + /* disable uart2 interrupt in PIC */ + lo &= ~(0xf << 28); + if (value) /* enable uart2 interrupt in PIC */ + lo |= (CS5536_UART2_INTR << 28); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); + break; + case PCI_ISA_FIXUP_REG: + if (value) { + /* enable the TARGET ABORT/MASTER ABORT etc. */ + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + lo |= 0x00000063; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + + default: + /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */ + break; + } +} + +/* + * isa_read: ISA read transfers + * + * We assume that this is not a bus master transfer. + */ +u32 pci_isa_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + /* we just check the first LBAR for the IO enable bit, */ + /* maybe we should changed later. */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo); + if (hi & 0x01) + conf_data |= PCI_COMMAND_IO; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + conf_data |= PCI_STATUS_FAST_BACK; + + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_TAS_ERR_FLAG) + conf_data |= PCI_STATUS_SIG_TARGET_ABORT; + if (lo & SB_TAR_ERR_FLAG) + conf_data |= PCI_STATUS_REC_TARGET_ABORT; + if (lo & SB_MAR_ERR_FLAG) + conf_data |= PCI_STATUS_REC_MASTER_ABORT; + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_DETECTED_PARITY; + break; + case PCI_CLASS_REVISION: + _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_ISA_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0x000000f8; + conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi); + break; + /* + * we only use the LBAR of DIVIL, no RCONF used. + * all of them are IO space. + */ + case PCI_BAR0_REG: + return pci_isa_read_bar(0); + break; + case PCI_BAR1_REG: + return pci_isa_read_bar(1); + break; + case PCI_BAR2_REG: + return pci_isa_read_bar(2); + break; + case PCI_BAR3_REG: + break; + case PCI_BAR4_REG: + return pci_isa_read_bar(4); + break; + case PCI_BAR5_REG: + return pci_isa_read_bar(5); + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_POINTER; + break; + case PCI_INTERRUPT_LINE: + /* no interrupt used here */ + conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00); + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson/common/cs5536/cs5536_ohci.c new file mode 100644 index 000000000000..8fdb02b6e90f --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_ohci.c @@ -0,0 +1,147 @@ +/* + * the OHCI Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +void pci_ohci_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + hi |= PCI_COMMAND_MASTER; + else + hi &= ~PCI_COMMAND_MASTER; + + if (value & PCI_COMMAND_MEMORY) + hi |= PCI_COMMAND_MEMORY; + else + hi &= ~PCI_COMMAND_MEMORY; + _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_OHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if ((value & 0x01) == 0x00) { + _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); + + value &= 0xfffffff0; + hi = 0x40000000 | ((value & 0xff000000) >> 24); + lo = 0x000fffff | ((value & 0x00fff000) << 8); + _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo); + } + break; + case PCI_OHCI_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT); + if (value) /* enable all the usb interrupt in PIC */ + lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); + break; + default: + break; + } +} + +u32 pci_ohci_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + if (hi & PCI_COMMAND_MASTER) + conf_data |= PCI_COMMAND_MASTER; + if (hi & PCI_COMMAND_MEMORY) + conf_data |= PCI_COMMAND_MEMORY; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_OHCI_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_OHCI_FLAG) { + conf_data = CS5536_OHCI_RANGE | + PCI_BASE_ADDRESS_SPACE_MEMORY; + lo &= ~SOFT_BAR_OHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + conf_data = lo & 0xffffff00; + conf_data &= ~0x0000000f; /* 32bit mem */ + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); + break; + case PCI_OHCI_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + if ((lo & 0x00000f00) == CS5536_USB_INTR) + conf_data = 1; + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson/common/cs5536/cs5536_pci.c b/arch/mips/loongson/common/cs5536/cs5536_pci.c new file mode 100644 index 000000000000..e23f3d7d2c1d --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_pci.c @@ -0,0 +1,87 @@ +/* + * read/write operation to the PCI config space of CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * the Virtual Support Module(VSM) for virtulizing the PCI + * configure space are defined in cs5536_modulename.c respectively, + * + * after this virtulizing, user can access the PCI configure space + * directly as a normal multi-function PCI device which follows + * the PCI-2.2 spec. + */ + +#include +#include + +enum { + CS5536_FUNC_START = -1, + CS5536_ISA_FUNC, + reserved_func, + CS5536_IDE_FUNC, + CS5536_ACC_FUNC, + CS5536_OHCI_FUNC, + CS5536_EHCI_FUNC, + CS5536_FUNC_END, +}; + +static const cs5536_pci_vsm_write vsm_conf_write[] = { + [CS5536_ISA_FUNC] pci_isa_write_reg, + [reserved_func] NULL, + [CS5536_IDE_FUNC] pci_ide_write_reg, + [CS5536_ACC_FUNC] pci_acc_write_reg, + [CS5536_OHCI_FUNC] pci_ohci_write_reg, + [CS5536_EHCI_FUNC] pci_ehci_write_reg, +}; + +static const cs5536_pci_vsm_read vsm_conf_read[] = { + [CS5536_ISA_FUNC] pci_isa_read_reg, + [reserved_func] NULL, + [CS5536_IDE_FUNC] pci_ide_read_reg, + [CS5536_ACC_FUNC] pci_acc_read_reg, + [CS5536_OHCI_FUNC] pci_ohci_read_reg, + [CS5536_EHCI_FUNC] pci_ehci_read_reg, +}; + +/* + * write to PCI config space and transfer it to MSR write. + */ +void cs5536_pci_conf_write4(int function, int reg, u32 value) +{ + if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) + return; + if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0)) + return; + + if (vsm_conf_write[function] != NULL) + vsm_conf_write[function](reg, value); +} + +/* + * read PCI config space and transfer it to MSR access. + */ +u32 cs5536_pci_conf_read4(int function, int reg) +{ + u32 data = 0; + + if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) + return 0; + if ((reg < 0) || ((reg & 0x03) != 0)) + return 0; + if (reg > 0x100) + return 0xffffffff; + + if (vsm_conf_read[function] != NULL) + data = vsm_conf_read[function](reg); + + return data; +} -- GitLab From 1032bce3ef81cb31fc85233ca668c17288e7884c Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 10 Nov 2009 00:06:13 +0800 Subject: [PATCH 215/618] MIPS: Lemote 2F: Add PCI support PCI support for the Fuloong 2E and Lemote Loongson 2F family machines is mostly identical with the exception of CS5536 support. Rename ops-fuloong2e.c to ops-loongson2.c then add the CS5536 support to share most of the source code among Loongson machines. Signed-off-by: Wu Zhangjin Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire Cc: Arnaud Patard Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- arch/mips/pci/Makefile | 3 +- arch/mips/pci/fixup-lemote2f.c | 160 ++++++++++++++++++ .../pci/{ops-fuloong2e.c => ops-loongson2.c} | 54 ++++++ 3 files changed, 216 insertions(+), 1 deletion(-) create mode 100644 arch/mips/pci/fixup-lemote2f.c rename arch/mips/pci/{ops-fuloong2e.c => ops-loongson2.c} (70%) diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 0610c869852d..c9a0dc122237 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -28,7 +28,8 @@ obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o -obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-fuloong2e.o +obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o +obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o diff --git a/arch/mips/pci/fixup-lemote2f.c b/arch/mips/pci/fixup-lemote2f.c new file mode 100644 index 000000000000..caf2edeb02f0 --- /dev/null +++ b/arch/mips/pci/fixup-lemote2f.c @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2008 Lemote Technology + * Copyright (C) 2004 ICT CAS + * Author: Li xiaoyu, lixy@ict.ac.cn + * + * Copyright (C) 2007 Lemote, Inc. + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include + +#include +#include +#include + +/* PCI interrupt pins + * + * These should not be changed, or you should consider loongson2f interrupt + * register and your pci card dispatch + */ + +#define PCIA 4 +#define PCIB 5 +#define PCIC 6 +#define PCID 7 + +/* all the pci device has the PCIA pin, check the datasheet. */ +static char irq_tab[][5] __initdata = { + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0}, /* 11: Unused */ + {0, 0, 0, 0, 0}, /* 12: Unused */ + {0, 0, 0, 0, 0}, /* 13: Unused */ + {0, 0, 0, 0, 0}, /* 14: Unused */ + {0, 0, 0, 0, 0}, /* 15: Unused */ + {0, 0, 0, 0, 0}, /* 16: Unused */ + {0, PCIA, 0, 0, 0}, /* 17: RTL8110-0 */ + {0, PCIB, 0, 0, 0}, /* 18: RTL8110-1 */ + {0, PCIC, 0, 0, 0}, /* 19: SiI3114 */ + {0, PCID, 0, 0, 0}, /* 20: 3-ports nec usb */ + {0, PCIA, PCIB, PCIC, PCID}, /* 21: PCI-SLOT */ + {0, 0, 0, 0, 0}, /* 22: Unused */ + {0, 0, 0, 0, 0}, /* 23: Unused */ + {0, 0, 0, 0, 0}, /* 24: Unused */ + {0, 0, 0, 0, 0}, /* 25: Unused */ + {0, 0, 0, 0, 0}, /* 26: Unused */ + {0, 0, 0, 0, 0}, /* 27: Unused */ +}; + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int virq; + + if ((PCI_SLOT(dev->devfn) != PCI_IDSEL_CS5536) + && (PCI_SLOT(dev->devfn) < 32)) { + virq = irq_tab[slot][pin]; + printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin, + virq + LOONGSON_IRQ_BASE); + if (virq != 0) + return LOONGSON_IRQ_BASE + virq; + else + return 0; + } else if (PCI_SLOT(dev->devfn) == PCI_IDSEL_CS5536) { /* cs5536 */ + switch (PCI_FUNC(dev->devfn)) { + case 2: + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + CS5536_IDE_INTR); + return CS5536_IDE_INTR; /* for IDE */ + case 3: + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + CS5536_ACC_INTR); + return CS5536_ACC_INTR; /* for AUDIO */ + case 4: /* for OHCI */ + case 5: /* for EHCI */ + case 6: /* for UDC */ + case 7: /* for OTG */ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + CS5536_USB_INTR); + return CS5536_USB_INTR; + } + return dev->irq; + } else { + printk(KERN_INFO " strange pci slot number.\n"); + return 0; + } +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +/* CS5536 SPEC. fixup */ +static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev) +{ + /* the uart1 and uart2 interrupt in PIC is enabled as default */ + pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1); + pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1); +} + +static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev) +{ + /* setting the mutex pin as IDE function */ + pci_write_config_dword(pdev, PCI_IDE_CFG_REG, + CS5536_IDE_FLASH_SIGNATURE); +} + +static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev) +{ + /* enable the AUDIO interrupt in PIC */ + pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1); + + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0); +} + +static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev) +{ + /* enable the OHCI interrupt in PIC */ + /* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */ + pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1); +} + +static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev) +{ + u32 hi, lo; + + /* Serial short detect enable */ + _rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo); + _wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo); + + /* setting the USB2.0 micro frame length */ + pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000); +} + +static void __init loongson_nec_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + pci_read_config_dword(pdev, 0xe0, &val); + /* Only 2 port be used */ + pci_write_config_dword(pdev, 0xe0, (val & ~3) | 0x2); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, + loongson_cs5536_isa_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_OHC, + loongson_cs5536_ohci_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_EHC, + loongson_cs5536_ehci_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO, + loongson_cs5536_acc_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, + loongson_cs5536_ide_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + loongson_nec_fixup); diff --git a/arch/mips/pci/ops-fuloong2e.c b/arch/mips/pci/ops-loongson2.c similarity index 70% rename from arch/mips/pci/ops-fuloong2e.c rename to arch/mips/pci/ops-loongson2.c index 171f65c99ca1..aa5d3da27212 100644 --- a/arch/mips/pci/ops-fuloong2e.c +++ b/arch/mips/pci/ops-loongson2.c @@ -20,6 +20,11 @@ #include +#ifdef CONFIG_CS5536 +#include +#include +#endif + #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 @@ -43,6 +48,29 @@ static int loongson_pcibios_config_access(unsigned char access_type, int reg = where & ~3; if (busnum == 0) { + /* board-specific part,currently,only fuloong2f,yeeloong2f + * use CS5536, fuloong2e use via686b, gdium has no + * south bridge + */ +#ifdef CONFIG_CS5536 + /* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to + * access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO, + * PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it + * will not go this branch, but the others. so, no calling dead + * loop here. + */ + if ((PCI_IDSEL_CS5536 == device) && (reg < PCI_MSR_CTRL)) { + switch (access_type) { + case PCI_ACCESS_READ: + *data = cs5536_pci_conf_read4(function, reg); + break; + case PCI_ACCESS_WRITE: + cs5536_pci_conf_write4(function, reg, *data); + break; + } + return 0; + } +#endif /* Type 0 configuration for onboard PCI bus */ if (device > MAX_DEV_NUM) return -1; @@ -152,3 +180,29 @@ struct pci_ops loongson_pci_ops = { .read = loongson_pcibios_read, .write = loongson_pcibios_write }; + +#ifdef CONFIG_CS5536 +void _rdmsr(u32 msr, u32 *hi, u32 *lo) +{ + struct pci_bus bus = { + .number = PCI_BUS_CS5536 + }; + u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0); + loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr); + loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo); + loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi); +} +EXPORT_SYMBOL(_rdmsr); + +void _wrmsr(u32 msr, u32 hi, u32 lo) +{ + struct pci_bus bus = { + .number = PCI_BUS_CS5536 + }; + u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0); + loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr); + loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo); + loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi); +} +EXPORT_SYMBOL(_wrmsr); +#endif -- GitLab From 6616db78eecab1236781c546670391e1e5dff256 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 10 Nov 2009 00:06:14 +0800 Subject: [PATCH 216/618] MIPS: Lemote 2F: Add IRQ support The generic i8259_irq() will make kernel hang on booting, so Loongson 2F needs its own polling method. IP6 is shared by the bonito interrupt and perfcounter interrupts. Signed-off-by: Wu Zhangjin Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire Cc: Arnaud Patard Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- arch/mips/loongson/Makefile | 6 ++ arch/mips/loongson/lemote-2f/Makefile | 5 + arch/mips/loongson/lemote-2f/irq.c | 132 ++++++++++++++++++++++++++ 3 files changed, 143 insertions(+) create mode 100644 arch/mips/loongson/lemote-2f/Makefile create mode 100644 arch/mips/loongson/lemote-2f/irq.c diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile index 39048c455d7d..2b76cb0fb07d 100644 --- a/arch/mips/loongson/Makefile +++ b/arch/mips/loongson/Makefile @@ -9,3 +9,9 @@ obj-$(CONFIG_MACH_LOONGSON) += common/ # obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ + +# +# Lemote loongson2f family machines +# + +obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/ diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile new file mode 100644 index 000000000000..2e188974d56b --- /dev/null +++ b/arch/mips/loongson/lemote-2f/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for lemote loongson2f family machines +# + +obj-y += irq.o diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c new file mode 100644 index 000000000000..50e7bb6012b7 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/irq.c @@ -0,0 +1,132 @@ +/* + * Copyright (C) 2007 Lemote Inc. + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include + +#include +#include +#include + +#include +#include + +#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */ +#define LOONGSON_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */ +#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */ +#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */ +#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */ + +#define LOONGSON_INT_BIT_INT0 (1 << 11) +#define LOONGSON_INT_BIT_INT1 (1 << 12) + +/* + * The generic i8259_irq() make the kernel hang on booting. Since we cannot + * get the irq via the IRR directly, we access the ISR instead. + */ +static inline int mach_i8259_irq(void) +{ + int irq, isr; + + irq = -1; + + if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) { + spin_lock(&i8259A_lock); + isr = inb(PIC_MASTER_CMD) & + ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR); + if (!isr) + isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8; + irq = ffs(isr) - 1; + if (unlikely(irq == 7)) { + /* + * This may be a spurious interrupt. + * + * Read the interrupt status register (ISR). If the most + * significant bit is not set then there is no valid + * interrupt. + */ + outb(0x0B, PIC_MASTER_ISR); /* ISR register */ + if (~inb(PIC_MASTER_ISR) & 0x80) + irq = -1; + } + spin_unlock(&i8259A_lock); + } + + return irq; +} + +static void i8259_irqdispatch(void) +{ + int irq; + + irq = mach_i8259_irq(); + if (irq >= 0) + do_IRQ(irq); + else + spurious_interrupt(); +} + +void mach_irq_dispatch(unsigned int pending) +{ + if (pending & CAUSEF_IP7) + do_IRQ(LOONGSON_TIMER_IRQ); + else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */ +#ifdef CONFIG_OPROFILE + do_IRQ(LOONGSON2_PERFCNT_IRQ); +#endif + bonito_irqdispatch(); + } else if (pending & CAUSEF_IP3) /* CPU UART */ + do_IRQ(LOONGSON_UART_IRQ); + else if (pending & CAUSEF_IP2) /* South Bridge */ + i8259_irqdispatch(); + else + spurious_interrupt(); +} + +void __init set_irq_trigger_mode(void) +{ + /* setup cs5536 as high level trigger */ + LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1; + LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1); +} + +static irqreturn_t ip6_action(int cpl, void *dev_id) +{ + return IRQ_HANDLED; +} + +struct irqaction ip6_irqaction = { + .handler = ip6_action, + .name = "cascade", + .flags = IRQF_SHARED, +}; + +struct irqaction cascade_irqaction = { + .handler = no_action, + .name = "cascade", +}; + +void __init mach_init_irq(void) +{ + /* init all controller + * 0-15 ------> i8259 interrupt + * 16-23 ------> mips cpu interrupt + * 32-63 ------> bonito irq + */ + + /* Sets the first-level interrupt dispatcher. */ + mips_cpu_irq_init(); + init_i8259_irqs(); + bonito_irq_init(); + + /* setup north bridge irq (bonito) */ + setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction); + /* setup source bridge irq (i8259) */ + setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction); +} -- GitLab From 2ee98e0f46a12423d5ecd7da520a1dd94540c37d Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 10 Nov 2009 00:06:15 +0800 Subject: [PATCH 217/618] MIPS: Lemote 2F: Add reset support Fuloong 2F, Yeeloong 2F and Menglong 2F have different reset / shutdown logic. Signed-off-by: Wu Zhangjin Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire Cc: Arnaud Patard Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- .../mips/include/asm/mach-loongson/loongson.h | 7 + arch/mips/loongson/lemote-2f/Makefile | 2 +- arch/mips/loongson/lemote-2f/reset.c | 172 ++++++++++++++++++ 3 files changed, 180 insertions(+), 1 deletion(-) create mode 100644 arch/mips/loongson/lemote-2f/reset.c diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index 62171f240c7b..99113902719a 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -42,6 +42,13 @@ extern void __init set_irq_trigger_mode(void); extern void __init mach_init_irq(void); extern void mach_irq_dispatch(unsigned int pending); +/* We need this in some places... */ +#define delay() ({ \ + int x; \ + for (x = 0; x < 100000; x++) \ + __asm__ __volatile__(""); \ +}) + #define LOONGSON_REG(x) \ (*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x))) diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile index 2e188974d56b..da543b1b51e1 100644 --- a/arch/mips/loongson/lemote-2f/Makefile +++ b/arch/mips/loongson/lemote-2f/Makefile @@ -2,4 +2,4 @@ # Makefile for lemote loongson2f family machines # -obj-y += irq.o +obj-y += irq.o reset.o diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c new file mode 100644 index 000000000000..0458a1c56419 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/reset.c @@ -0,0 +1,172 @@ +/* Board-specific reboot/shutdown routines + * + * Copyright (c) 2009 Philippe Vachon + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include + +#include + +#include + +#include + +static void reset_cpu(void) +{ + /* + * reset cpu to full speed, this is needed when enabling cpu frequency + * scalling + */ + LOONGSON_CHIPCFG0 |= 0x7; +} + +/* reset support for fuloong2f */ + +static void fl2f_reboot(void) +{ + reset_cpu(); + + /* send a reset signal to south bridge. + * + * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset + * normally with this reset operation and it will not work in PMON, but + * you can type halt command and then reboot, seems the hardware reset + * logic not work normally. + */ + { + u32 hi, lo; + _rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo); + lo |= 0x00000001; + _wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo); + } +} + +static void fl2f_shutdown(void) +{ + u32 hi, lo, val; + int gpio_base; + + /* get gpio base */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo); + gpio_base = lo & 0xff00; + + /* make cs5536 gpio13 output enable */ + val = inl(gpio_base + GPIOL_OUT_EN); + val &= ~(1 << (16 + 13)); + val |= (1 << 13); + outl(val, gpio_base + GPIOL_OUT_EN); + mmiowb(); + /* make cs5536 gpio13 output low level voltage. */ + val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13)); + val |= (1 << (16 + 13)); + outl(val, gpio_base + GPIOL_OUT_VAL); + mmiowb(); +} + +/* reset support for yeeloong2f and mengloong2f notebook */ + +/* + * The following registers are determined by the EC index configuration. + * 1. fill the PORT_HIGH as EC register high part. + * 2. fill the PORT_LOW as EC register low part. + * 3. fill the PORT_DATA as EC register write data or get the data from it. + */ + +#define EC_IO_PORT_HIGH 0x0381 +#define EC_IO_PORT_LOW 0x0382 +#define EC_IO_PORT_DATA 0x0383 +#define REG_RESET_HIGH 0xF4 /* reset the machine auto-clear : rd/wr */ +#define REG_RESET_LOW 0xEC +#define BIT_RESET_ON (1 << 0) + +void ml2f_reboot(void) +{ + reset_cpu(); + + /* sending an reset signal to EC(embedded controller) */ + outb(REG_RESET_HIGH, EC_IO_PORT_HIGH); + outb(REG_RESET_LOW, EC_IO_PORT_LOW); + mmiowb(); + outb(BIT_RESET_ON, EC_IO_PORT_DATA); + mmiowb(); +} + +#define yl2f89_reboot ml2f_reboot + +/* menglong(7inches) laptop has different shutdown logic from 8.9inches */ +#define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d +#define EC_SHUTDOWN_IO_PORT_LOW 0xff2e +#define EC_SHUTDOWN_IO_PORT_DATA 0xff2f +#define REG_SHUTDOWN_HIGH 0xFC +#define REG_SHUTDOWN_LOW 0x29 +#define BIT_SHUTDOWN_ON (1 << 1) + +static void ml2f_shutdown(void) +{ + u8 val; + u64 i; + + outb(REG_SHUTDOWN_HIGH, EC_SHUTDOWN_IO_PORT_HIGH); + outb(REG_SHUTDOWN_LOW, EC_SHUTDOWN_IO_PORT_LOW); + mmiowb(); + val = inb(EC_SHUTDOWN_IO_PORT_DATA); + outb(val & (~BIT_SHUTDOWN_ON), EC_SHUTDOWN_IO_PORT_DATA); + mmiowb(); + /* need enough wait here... how many microseconds needs? */ + for (i = 0; i < 0x10000; i++) + delay(); + outb(val | BIT_SHUTDOWN_ON, EC_SHUTDOWN_IO_PORT_DATA); + mmiowb(); +} + +static void yl2f89_shutdown(void) +{ + /* cpu-gpio0 output low */ + LOONGSON_GPIODATA &= ~0x00000001; + /* cpu-gpio0 as output */ + LOONGSON_GPIOIE &= ~0x00000001; +} + +void mach_prepare_reboot(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2F: + fl2f_reboot(); + break; + case MACH_LEMOTE_ML2F7: + ml2f_reboot(); + break; + case MACH_LEMOTE_YL2F89: + yl2f89_reboot(); + break; + default: + break; + } +} + +void mach_prepare_shutdown(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2F: + fl2f_shutdown(); + break; + case MACH_LEMOTE_ML2F7: + ml2f_shutdown(); + break; + case MACH_LEMOTE_YL2F89: + yl2f89_shutdown(); + break; + default: + break; + } +} -- GitLab From 6e34358ed4f89556b5474ff883ac148750189ef0 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 10 Nov 2009 00:06:16 +0800 Subject: [PATCH 218/618] MIPS: Lemote 2F: Add defconfig file Add default config file for Lemote Loongson 2F family machines. The resulting kernel image can be shared between Fuloong 2F, Yeeloong 2F and other Lemote Loongson 2F family machines. If you are using an old PMON, and not using a 2f box, please add a new command line argument in the boot.cfg. For example, add this argument for 8.9inches notebook: machtype=lemote-yeeloong-2f-8.9inches or machtype=8.9 More information from arch/mips/loongson/common/machtype.c. Signed-off-by: Wu Zhangjin Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire Cc: Arnaud Patard Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- arch/mips/configs/lemote2f_defconfig | 1836 ++++++++++++++++++++++++++ 1 file changed, 1836 insertions(+) create mode 100644 arch/mips/configs/lemote2f_defconfig diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig new file mode 100644 index 000000000000..89e88a0753dc --- /dev/null +++ b/arch/mips/configs/lemote2f_defconfig @@ -0,0 +1,1836 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc6 +# Mon Nov 9 23:42:42 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +CONFIG_MACH_LOONGSON=y +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +CONFIG_ARCH_SPARSEMEM_ENABLE=y +# CONFIG_LEMOTE_FULOONG2E is not set +CONFIG_LEMOTE_MACH2F=y +CONFIG_CS5536=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_I8259=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2E is not set +CONFIG_CPU_LOONGSON2F=y +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y +CONFIG_CPU_LOONGSON2=y +CONFIG_SYS_HAS_CPU_LOONGSON2F=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +# CONFIG_32BIT is not set +CONFIG_64BIT=y +# CONFIG_PAGE_SIZE_4KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PAGE_SIZE_16KB=y +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_BOARD_SCACHE=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_WB=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_SYS_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=250 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLOCK_COMPAT=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +CONFIG_ISA=y +CONFIG_MMU=y +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_MIPS32_COMPAT=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_BINFMT_ELF32=y + +# +# Power management options +# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION_NVS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="/dev/hda3" +# CONFIG_PM_RUNTIME is not set +CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +CONFIG_DEFAULT_BIC=y +# CONFIG_DEFAULT_CUBIC is not set +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="bic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +# CONFIG_NET_ACT_SKBEDIT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +# CONFIG_RFKILL_INPUT is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +# CONFIG_PNP is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +CONFIG_IDE_TASK_IOCTL=y +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set + +# +# Other IDE chipsets support +# + +# +# Note: most of these also require special kernel boot parameters +# +# CONFIG_BLK_DEV_4DRIVES is not set +# CONFIG_BLK_DEV_ALI14XX is not set +# CONFIG_BLK_DEV_DTC2278 is not set +# CONFIG_BLK_DEV_HT6560B is not set +# CONFIG_BLK_DEV_QD65XX is not set +# CONFIG_BLK_DEV_UMC8672 is not set +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_IFB is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_TC35815 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_TUNE_TWISTER=y +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set +CONFIG_WLAN=y +CONFIG_WLAN_PRE80211=y +# CONFIG_STRIP is not set +# CONFIG_WAVELAN is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_HSO is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +CONFIG_MOUSE_PS2_SYNAPTICS=y +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=16 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_FOURPORT=y +# CONFIG_SERIAL_8250_ACCENT is not set +# CONFIG_SERIAL_8250_BOCA is not set +# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set +# CONFIG_SERIAL_8250_HUB6 is not set +# CONFIG_SERIAL_8250_SHARE_IRQ is not set +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_STRADIS is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +CONFIG_FB_BOOT_VESA_SUPPORT=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +CONFIG_FB_SIS=y +CONFIG_FB_SIS_300=y +CONFIG_FB_SIS_315=y +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_FONT_6x11=y +CONFIG_FONT_7x14=y +CONFIG_FONT_PEARL_8x8=y +CONFIG_FONT_ACORN_8x8=y +CONFIG_FONT_MINI_4x6=y +CONFIG_FONT_SUN8x16=y +CONFIG_FONT_SUN12x22=y +CONFIG_FONT_10x18=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_RTCTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +CONFIG_SND_CS5535AUDIO=m +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_MIPS is not set +# CONFIG_SND_USB is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +# CONFIG_USB_PRINTER is not set +CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_ET131X is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_ECHO is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_ALTERA_PCIE_CHDMA is not set +# CONFIG_RTL8187SE is not set +# CONFIG_RTL8192SU is not set +# CONFIG_RTL8192E is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# + +# +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +# CONFIG_INPUT_GPIO is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_B3DFG is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_VT6655 is not set +# CONFIG_VT6656 is not set +# CONFIG_FB_UDL is not set +# CONFIG_VME_BUS is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set +CONFIG_FB_SM7XX=y +CONFIG_FB_SM7XX_ACCEL=y + +# +# File systems +# +# CONFIG_EXT2_FS is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE="" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- GitLab From 55045ff5557bc804752e84dca5d1b1f1d4bb4e31 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Wed, 11 Nov 2009 13:39:12 +0800 Subject: [PATCH 219/618] MIPS: Loongson 2F: Cleanup the #if clauses This patch adds two new kernel options: CPU_SUPPORTS_CPUFREQ and CPU_SUPPORTS_ADDRWINCFG to describe the new features of Loongons 2F and replaces the several ugly #if clauses by them. These two options will be utilized by the future loongson revisions and related drivers such as the coming Loongson 2F CPUFreq driver. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 6 ++++++ arch/mips/include/asm/mach-loongson/loongson.h | 6 +++--- arch/mips/include/asm/mach-loongson/pci.h | 4 ++-- arch/mips/loongson/common/init.c | 2 +- arch/mips/loongson/common/mem.c | 8 ++++---- arch/mips/loongson/common/pci.c | 2 +- 6 files changed, 17 insertions(+), 11 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index c2b4cd511419..51e4e5b02f9d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1334,6 +1334,8 @@ config SYS_HAS_CPU_LOONGSON2E config SYS_HAS_CPU_LOONGSON2F bool + select CPU_SUPPORTS_CPUFREQ + select CPU_SUPPORTS_ADDRWINCFG if 64BIT config SYS_HAS_CPU_MIPS32_R1 bool @@ -1443,6 +1445,10 @@ config CPU_SUPPORTS_32BIT_KERNEL bool config CPU_SUPPORTS_64BIT_KERNEL bool +config CPU_SUPPORTS_CPUFREQ + bool +config CPU_SUPPORTS_ADDRWINCFG + bool config CPU_SUPPORTS_HUGEPAGES bool config MIPS_PGD_C0_CONTEXT diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index 99113902719a..9bccdb5d4b51 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -227,7 +227,7 @@ extern void mach_irq_dispatch(unsigned int pending); ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) /* Chip Config */ -#ifdef CONFIG_CPU_LOONGSON2F +#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ #define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80) #endif @@ -236,7 +236,7 @@ extern void mach_irq_dispatch(unsigned int pending); * * loongson2e do not have this module */ -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT) +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG /* address window config module base address */ #define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul @@ -306,6 +306,6 @@ extern unsigned long _loongson_addrwincfg_base; #define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \ LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size) -#endif /* ! CONFIG_CPU_LOONGSON2F && CONFIG_64BIT */ +#endif /* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */ #endif /* __ASM_MACH_LOONGSON_LOONGSON_H */ diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson/pci.h index 31ba90891ec0..a199a4f6de4e 100644 --- a/arch/mips/include/asm/mach-loongson/pci.h +++ b/arch/mips/include/asm/mach-loongson/pci.h @@ -28,7 +28,7 @@ extern struct pci_ops loongson_pci_ops; /* this is an offset from mips_io_port_base */ #define LOONGSON_PCI_IO_START 0x00004000UL -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT) +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG /* * we use address window2 to map cpu address space to pci space @@ -56,6 +56,6 @@ extern struct pci_ops loongson_pci_ops; /* this is an offset from mips_io_port_base */ #define LOONGSON_PCI_IO_START 0x00004000UL -#endif /* !(defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT))*/ +#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ #endif /* !__ASM_MACH_LOONGSON_PCI_H_ */ diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c index 743d3571f010..2b92a23d29dd 100644 --- a/arch/mips/loongson/common/init.c +++ b/arch/mips/loongson/common/init.c @@ -21,7 +21,7 @@ void __init prom_init(void) set_io_port_base((unsigned long) ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT) +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG _loongson_addrwincfg_base = (unsigned long) ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE); #endif diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c index e93551dbc9ea..981e9190f393 100644 --- a/arch/mips/loongson/common/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -20,8 +20,7 @@ void __init prom_init_memory(void) add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << 20), BOOT_MEM_RESERVED); -#ifdef CONFIG_64BIT -#ifdef CONFIG_CPU_LOONGSON2F +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG { int bit; @@ -36,8 +35,9 @@ void __init prom_init_memory(void) 0x80000000ul, (1 << bit)); mmiowb(); } -#endif /* CONFIG_CPU_LOONGSON2F */ +#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ +#ifdef CONFIG_64BIT if (highmemsize > 0) add_memory_region(LOONGSON_HIGHMEM_START, highmemsize << 20, BOOT_MEM_RAM); @@ -45,7 +45,7 @@ void __init prom_init_memory(void) add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); -#endif /* CONFIG_64BIT */ +#endif /* !CONFIG_64BIT */ } /* override of arch/mips/mm/cache.c: __uncached_access */ diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c index eac43b8f695e..31d8c5ecd16c 100644 --- a/arch/mips/loongson/common/pci.c +++ b/arch/mips/loongson/common/pci.c @@ -68,7 +68,7 @@ static void __init setup_pcimap(void) deassert for some broken device */ LOONGSON_PXARB_CFG = 0x00fe0105ul; -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT) +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG /* * set cpu addr window2 to map CPU address space to PCI address space */ -- GitLab From 22f1fdfd62a5f6ab738ffe03dc2ee9f1f25dabc4 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Wed, 11 Nov 2009 13:59:23 +0800 Subject: [PATCH 220/618] MIPS: Add support for uncached accelerated mappings. Loongson2f support video acceleration. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/624/ Patchwork: http://patchwork.linux-mips.org/patch/625/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 3 ++ arch/mips/include/asm/pgtable.h | 13 ++++++++ arch/mips/loongson/common/mem.c | 58 +++++++++++++++++++++++++++++++++ 3 files changed, 74 insertions(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 51e4e5b02f9d..e2116b1f968e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1336,6 +1336,7 @@ config SYS_HAS_CPU_LOONGSON2F bool select CPU_SUPPORTS_CPUFREQ select CPU_SUPPORTS_ADDRWINCFG if 64BIT + select CPU_SUPPORTS_UNCACHED_ACCELERATED config SYS_HAS_CPU_MIPS32_R1 bool @@ -1451,6 +1452,8 @@ config CPU_SUPPORTS_ADDRWINCFG bool config CPU_SUPPORTS_HUGEPAGES bool +config CPU_SUPPORTS_UNCACHED_ACCELERATED + bool config MIPS_PGD_C0_CONTEXT bool default y if 64BIT && CPU_MIPSR2 diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index d6eb6134abec..1854336e56a2 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -389,6 +389,19 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma, #include +/* + * uncached accelerated TLB map for video memory access + */ +#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED +#define __HAVE_PHYS_MEM_ACCESS_PROT + +struct file; +pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot); +int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t *vma_prot); +#endif + /* * We provide our own get_unmapped area to cope with the virtual aliasing * constraints placed on us by the cache architecture. diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c index 981e9190f393..ceacd092b446 100644 --- a/arch/mips/loongson/common/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -58,3 +58,61 @@ int __uncached_access(struct file *file, unsigned long addr) ((addr >= LOONGSON_MMIO_MEM_START) && (addr < LOONGSON_MMIO_MEM_END)); } + +#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED + +#include +#include +#include + +static unsigned long uca_start, uca_end; + +pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot) +{ + unsigned long offset = pfn << PAGE_SHIFT; + unsigned long end = offset + size; + + if (__uncached_access(file, offset)) { + if (((uca_start && offset) >= uca_start) && + (end <= uca_end)) + return __pgprot((pgprot_val(vma_prot) & + ~_CACHE_MASK) | + _CACHE_UNCACHED_ACCELERATED); + else + return pgprot_noncached(vma_prot); + } + return vma_prot; +} + +static int __init find_vga_mem_init(void) +{ + struct pci_dev *dev = 0; + struct resource *r; + int idx; + + if (uca_start) + return 0; + + for_each_pci_dev(dev) { + if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) { + for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { + r = &dev->resource[idx]; + if (!r->start && r->end) + continue; + if (r->flags & IORESOURCE_IO) + continue; + if (r->flags & IORESOURCE_MEM) { + uca_start = r->start; + uca_end = r->end; + return 0; + } + } + } + } + + return 0; +} + +late_initcall(find_vga_mem_init); +#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */ -- GitLab From f181bf60e3f31cdab48bd8b9d913201ed2f9e522 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Wed, 11 Nov 2009 14:57:05 +0800 Subject: [PATCH 221/618] MIPS: Loongson 2F: Add suspend support framework This patch add basic suspend support for loongson2f family machines, loongson2f have a specific feature: when we set it's frequency to ZERO, it will go into a wait mode, and then can be waked up by the external interrupt. so, if we setup suitable interrupts before putting it into wait mode, we will be able wake it up whenever we want via sending the relative interrupts to it. These interrupts are board-specific, Yeeloong2F use the keyboard interrupt and SCI interrupt, but LingLoong and Fuloong2F use the interrupts connected to the processors directly. and BTW: some old LingLoong and FuLoong2F have no such interrupts connected, so, there is no way to wake them up from suspend mode. and therefore, please do not enable the kernel support for them. The board-specific support will be added in the coming patches. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Wu Zhangjin Cc: Len Brown Cc: Rafael J. Wysocki Cc: linux-pm@lists.linux-foundation.org Patchwork: http://patchwork.linux-mips.org/patch/629/ Acked-by: Pavel Machek Signed-off-by: Ralf Baechle --- arch/mips/loongson/Kconfig | 5 + arch/mips/loongson/common/Makefile | 6 ++ arch/mips/loongson/common/pm.c | 161 +++++++++++++++++++++++++++++ 3 files changed, 172 insertions(+) create mode 100644 arch/mips/loongson/common/pm.c diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index a214127895f2..17e72fde908c 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -61,3 +61,8 @@ endchoice config CS5536 bool + +config LOONGSON_SUSPEND + bool + default y + depends on CPU_SUPPORTS_CPUFREQ && SUSPEND diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index a82527fdfb65..a21724d50e2c 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -16,3 +16,9 @@ obj-$(CONFIG_SERIAL_8250) += serial.o # space # obj-$(CONFIG_CS5536) += cs5536/ + +# +# Suspend Support +# + +obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o diff --git a/arch/mips/loongson/common/pm.c b/arch/mips/loongson/common/pm.c new file mode 100644 index 000000000000..b625fec8a4d5 --- /dev/null +++ b/arch/mips/loongson/common/pm.c @@ -0,0 +1,161 @@ +/* + * loongson-specific suspend support + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include + +#include +#include + +#include + +static unsigned int __maybe_unused cached_master_mask; /* i8259A */ +static unsigned int __maybe_unused cached_slave_mask; +static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */ + +void arch_suspend_disable_irqs(void) +{ + /* disable all mips events */ + local_irq_disable(); + +#ifdef CONFIG_I8259 + /* disable all events of i8259A */ + cached_slave_mask = inb(PIC_SLAVE_IMR); + cached_master_mask = inb(PIC_MASTER_IMR); + + outb(0xff, PIC_SLAVE_IMR); + inb(PIC_SLAVE_IMR); + outb(0xff, PIC_MASTER_IMR); + inb(PIC_MASTER_IMR); +#endif + /* disable all events of bonito */ + cached_bonito_irq_mask = LOONGSON_INTEN; + LOONGSON_INTENCLR = 0xffff; + (void)LOONGSON_INTENCLR; +} + +void arch_suspend_enable_irqs(void) +{ + /* enable all mips events */ + local_irq_enable(); +#ifdef CONFIG_I8259 + /* only enable the cached events of i8259A */ + outb(cached_slave_mask, PIC_SLAVE_IMR); + outb(cached_master_mask, PIC_MASTER_IMR); +#endif + /* enable all cached events of bonito */ + LOONGSON_INTENSET = cached_bonito_irq_mask; + (void)LOONGSON_INTENSET; +} + +/* + * Setup the board-specific events for waking up loongson from wait mode + */ +void __weak setup_wakeup_events(void) +{ +} + +/* + * Check wakeup events + */ +int __weak wakeup_loongson(void) +{ + return 1; +} + +/* + * If the events are really what we want to wakeup the CPU, wake it up + * otherwise put the CPU asleep again. + */ +static void wait_for_wakeup_events(void) +{ + while (!wakeup_loongson()) + LOONGSON_CHIPCFG0 &= ~0x7; +} + +/* + * Stop all perf counters + * + * $24 is the control register of Loongson perf counter + */ +static inline void stop_perf_counters(void) +{ + __write_64bit_c0_register($24, 0, 0); +} + + +static void loongson_suspend_enter(void) +{ + static unsigned int cached_cpu_freq; + + /* setup wakeup events via enabling the IRQs */ + setup_wakeup_events(); + + stop_perf_counters(); + + cached_cpu_freq = LOONGSON_CHIPCFG0; + + /* Put CPU into wait mode */ + LOONGSON_CHIPCFG0 &= ~0x7; + + /* wait for the given events to wakeup cpu from wait mode */ + wait_for_wakeup_events(); + + LOONGSON_CHIPCFG0 = cached_cpu_freq; + mmiowb(); +} + +void __weak mach_suspend(void) +{ +} + +void __weak mach_resume(void) +{ +} + +static int loongson_pm_enter(suspend_state_t state) +{ + mach_suspend(); + + /* processor specific suspend */ + loongson_suspend_enter(); + + mach_resume(); + + return 0; +} + +static int loongson_pm_valid_state(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_ON: + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + return 1; + + default: + return 0; + } +} + +static struct platform_suspend_ops loongson_pm_ops = { + .valid = loongson_pm_valid_state, + .enter = loongson_pm_enter, +}; + +static int __init loongson_pm_init(void) +{ + suspend_set_ops(&loongson_pm_ops); + + return 0; +} +arch_initcall(loongson_pm_init); -- GitLab From a9e8641f4c252f93875cf30cb28c0f333539f0bf Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Wed, 11 Nov 2009 14:57:41 +0800 Subject: [PATCH 222/618] MIPS: Yeeloong 2F: Add board specific suspend support Lemote Loongson 2F family machines need an external interrupt to wake the system from the suspend mode. For YeeLoong 2F and Mengloong 2F setup the keyboard interrupt as the wakeup interrupt. The new Fuloong 2F and LingLoong 2F have a button to directly send an interrupt to the CPU so there is no need to setup an interrupt. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Wu Zhangjin Cc: Len Brown Cc: Rafael J. Wysocki Cc: linux-pm@lists.linux-foundation.org Patchwork: http://patchwork.linux-mips.org/patch/630/ Acked-by: Pavel Machek Signed-off-by: Ralf Baechle --- arch/mips/loongson/lemote-2f/Makefile | 6 +++ arch/mips/loongson/lemote-2f/pm.c | 73 +++++++++++++++++++++++++++ 2 files changed, 79 insertions(+) create mode 100644 arch/mips/loongson/lemote-2f/pm.c diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile index da543b1b51e1..5add7b2ead1c 100644 --- a/arch/mips/loongson/lemote-2f/Makefile +++ b/arch/mips/loongson/lemote-2f/Makefile @@ -3,3 +3,9 @@ # obj-y += irq.o reset.o + +# +# Suspend Support +# + +obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o diff --git a/arch/mips/loongson/lemote-2f/pm.c b/arch/mips/loongson/lemote-2f/pm.c new file mode 100644 index 000000000000..8090d0514221 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/pm.c @@ -0,0 +1,73 @@ +/* + * Lemote loongson2f family machines' specific suspend support + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include + +#define I8042_KBD_IRQ 1 +#define I8042_CTR_KBDINT 0x01 +#define I8042_CTR_KBDDIS 0x10 + +static unsigned char i8042_ctr; + +static int i8042_enable_kbd_port(void) +{ + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { + pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port." + "\n"); + return -EIO; + } + + i8042_ctr &= ~I8042_CTR_KBDDIS; + i8042_ctr |= I8042_CTR_KBDINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + i8042_ctr &= ~I8042_CTR_KBDINT; + i8042_ctr |= I8042_CTR_KBDDIS; + pr_err("i8042.c: Failed to enable KBD port.\n"); + + return -EIO; + } + + return 0; +} + +/* + * The i8042 is connnected to i8259A + */ +void setup_wakeup_events(void) +{ + int irq_mask; + + switch (mips_machtype) { + case MACH_LEMOTE_ML2F7: + case MACH_LEMOTE_YL2F89: + /* open the keyboard irq in i8259A */ + outb((0xff & ~(1 << I8042_KBD_IRQ)), PIC_MASTER_IMR); + irq_mask = inb(PIC_MASTER_IMR); + + /* enable keyboard port */ + i8042_enable_kbd_port(); + break; + + default: + break; + } +} -- GitLab From 13e79b462212ac46a046932af06117eaf7a9f77b Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 13 Nov 2009 16:04:53 +0900 Subject: [PATCH 223/618] MIPS: Sibyte: Use hweight8 instead of counting bits Signed-off-by: Akinobu Mita Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/637/ Signed-off-by: Ralf Baechle --- arch/mips/mm/cerr-sb1.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c index 1bd1f18ac23c..3571090ba178 100644 --- a/arch/mips/mm/cerr-sb1.c +++ b/arch/mips/mm/cerr-sb1.c @@ -567,13 +567,10 @@ static uint32_t extract_dc(unsigned short addr, int data) datalo = ((unsigned long long)datalohi << 32) | datalolo; ecc = dc_ecc(datalo); if (ecc != datahi) { - int bits = 0; + int bits; bad_ecc |= 1 << (3-offset); ecc ^= datahi; - while (ecc) { - if (ecc & 1) bits++; - ecc >>= 1; - } + bits = hweight8(ecc); res |= (bits == 1) ? CP0_CERRD_DATA_SBE : CP0_CERRD_DATA_DBE; } printk(" %02X-%016llX", datahi, datalo); -- GitLab From a3a0f8c8ed2e2470f4dcd6da95020d41fed84747 Mon Sep 17 00:00:00 2001 From: David VomLehn Date: Sun, 30 Aug 2009 17:15:11 -0700 Subject: [PATCH 224/618] MIPS: PowerTV: Base files for Cisco PowerTV platform Add the Cisco Powertv cable settop box to the MIPS tree. This platform is based on a MIPS 24Kc processor with various devices integrated on the same ASIC. There are multiple models of this box, with differing configuration but the same kernel runs across the product line. Signed-off-by: David VomLehn Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/132/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 22 + arch/mips/Makefile | 7 + arch/mips/configs/powertv_defconfig | 1549 +++++++++++++++++ arch/mips/include/asm/mach-powertv/asic.h | 107 ++ .../mips/include/asm/mach-powertv/asic_regs.h | 155 ++ .../include/asm/mach-powertv/dma-coherence.h | 119 ++ .../include/asm/mach-powertv/interrupts.h | 254 +++ arch/mips/include/asm/mach-powertv/ioremap.h | 90 + arch/mips/include/asm/mach-powertv/irq.h | 25 + .../include/asm/mach-powertv/powertv-clock.h | 29 + arch/mips/include/asm/mach-powertv/war.h | 28 + arch/mips/kernel/Makefile | 1 + arch/mips/kernel/csrc-powertv.c | 180 ++ arch/mips/powertv/Kconfig | 21 + arch/mips/powertv/Makefile | 28 + arch/mips/powertv/asic/Kconfig | 28 + arch/mips/powertv/asic/Makefile | 23 + arch/mips/powertv/asic/asic-calliope.c | 98 ++ arch/mips/powertv/asic/asic-cronus.c | 98 ++ arch/mips/powertv/asic/asic-zeus.c | 98 ++ arch/mips/powertv/asic/asic_devices.c | 787 +++++++++ arch/mips/powertv/asic/asic_int.c | 125 ++ arch/mips/powertv/asic/irq_asic.c | 116 ++ arch/mips/powertv/asic/prealloc-calliope.c | 620 +++++++ arch/mips/powertv/asic/prealloc-cronus.c | 608 +++++++ arch/mips/powertv/asic/prealloc-cronuslite.c | 290 +++ arch/mips/powertv/asic/prealloc-zeus.c | 459 +++++ arch/mips/powertv/cmdline.c | 52 + arch/mips/powertv/init.c | 128 ++ arch/mips/powertv/init.h | 28 + arch/mips/powertv/memory.c | 186 ++ arch/mips/powertv/pci/Makefile | 21 + arch/mips/powertv/pci/fixup-powertv.c | 36 + arch/mips/powertv/pci/powertv-pci.h | 31 + arch/mips/powertv/powertv-clock.h | 26 + arch/mips/powertv/powertv_setup.c | 351 ++++ arch/mips/powertv/reset.c | 65 + arch/mips/powertv/reset.h | 26 + arch/mips/powertv/time.c | 37 + 39 files changed, 6952 insertions(+) create mode 100644 arch/mips/configs/powertv_defconfig create mode 100644 arch/mips/include/asm/mach-powertv/asic.h create mode 100644 arch/mips/include/asm/mach-powertv/asic_regs.h create mode 100644 arch/mips/include/asm/mach-powertv/dma-coherence.h create mode 100644 arch/mips/include/asm/mach-powertv/interrupts.h create mode 100644 arch/mips/include/asm/mach-powertv/ioremap.h create mode 100644 arch/mips/include/asm/mach-powertv/irq.h create mode 100644 arch/mips/include/asm/mach-powertv/powertv-clock.h create mode 100644 arch/mips/include/asm/mach-powertv/war.h create mode 100644 arch/mips/kernel/csrc-powertv.c create mode 100644 arch/mips/powertv/Kconfig create mode 100644 arch/mips/powertv/Makefile create mode 100644 arch/mips/powertv/asic/Kconfig create mode 100644 arch/mips/powertv/asic/Makefile create mode 100644 arch/mips/powertv/asic/asic-calliope.c create mode 100644 arch/mips/powertv/asic/asic-cronus.c create mode 100644 arch/mips/powertv/asic/asic-zeus.c create mode 100644 arch/mips/powertv/asic/asic_devices.c create mode 100644 arch/mips/powertv/asic/asic_int.c create mode 100644 arch/mips/powertv/asic/irq_asic.c create mode 100644 arch/mips/powertv/asic/prealloc-calliope.c create mode 100644 arch/mips/powertv/asic/prealloc-cronus.c create mode 100644 arch/mips/powertv/asic/prealloc-cronuslite.c create mode 100644 arch/mips/powertv/asic/prealloc-zeus.c create mode 100644 arch/mips/powertv/cmdline.c create mode 100644 arch/mips/powertv/init.c create mode 100644 arch/mips/powertv/init.h create mode 100644 arch/mips/powertv/memory.c create mode 100644 arch/mips/powertv/pci/Makefile create mode 100644 arch/mips/powertv/pci/fixup-powertv.c create mode 100644 arch/mips/powertv/pci/powertv-pci.h create mode 100644 arch/mips/powertv/powertv-clock.h create mode 100644 arch/mips/powertv/powertv_setup.c create mode 100644 arch/mips/powertv/reset.c create mode 100644 arch/mips/powertv/reset.h create mode 100644 arch/mips/powertv/time.c diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e2116b1f968e..e7f385444d41 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -338,6 +338,24 @@ config PMC_YOSEMITE Yosemite is an evaluation board for the RM9000x2 processor manufactured by PMC-Sierra. +config POWERTV + bool "Cisco PowerTV" + select BOOT_ELF32 + select CEVT_R4K + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI + select CSRC_POWERTV + select DMA_NONCOHERENT + select HW_HAS_PCI + select SYS_HAS_EARLY_PRINTK + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select USB_OHCI_LITTLE_ENDIAN + help + This enables support for the Cisco PowerTV Platform. + config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" select ARC @@ -683,6 +701,7 @@ source "arch/mips/bcm63xx/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" +source "arch/mips/powertv/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" source "arch/mips/txx9/Kconfig" @@ -782,6 +801,9 @@ config CSRC_BCM1480 config CSRC_IOASIC bool +config CSRC_POWERTV + bool + config CSRC_R4K_LIB bool diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 184d5beb278d..0a7e6146bb4b 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -444,6 +444,13 @@ cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh core-$(CONFIG_NEC_MARKEINS) += arch/mips/emma/markeins/ load-$(CONFIG_NEC_MARKEINS) += 0xffffffff88100000 +# +# Cisco PowerTV Platform +# +core-$(CONFIG_POWERTV) += arch/mips/powertv/ +cflags-$(CONFIG_POWERTV) += -I$(srctree)/arch/mips/include/asm/mach-powertv +load-$(CONFIG_POWERTV) += 0xffffffff90800000 + # # SGI IP22 (Indy/Indigo2) # diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig new file mode 100644 index 000000000000..3aff69ab6c32 --- /dev/null +++ b/arch/mips/configs/powertv_defconfig @@ -0,0 +1,1549 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31-rc5 +# Fri Aug 28 14:49:33 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +CONFIG_POWERTV=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_MIN_RUNTIME_RESOURCES is not set +# CONFIG_BOOTLOADER_DRIVER is not set +CONFIG_BOOTLOADER_FAMILY="R2" +CONFIG_CSRC_POWERTV=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_EARLY_PRINTK is not set +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_NO_IOPORT is not set +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR2=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_MIPSR2_IRQ_VI=y +CONFIG_CPU_MIPSR2_IRQ_EI=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_HIGHMEM is not set +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_SYS_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +CONFIG_HZ_1000=y +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=1000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +CONFIG_TIMERFD=y +# CONFIG_EVENTFD is not set +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_FREEZER is not set + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +CONFIG_MMU=y +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y +CONFIG_INET6_IPCOMP=y +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=y +CONFIG_INET6_TUNNEL=y +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +CONFIG_IPV6_TUNNEL=y +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +# CONFIG_BRIDGE_NETFILTER is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=y +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=y +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=y +# CONFIG_IP_NF_TARGET_REJECT is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +CONFIG_IP_NF_ARPTABLES=y +CONFIG_IP_NF_ARPFILTER=y +# CONFIG_IP_NF_ARP_MANGLE is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=y +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_MH is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_TARGET_HL is not set +# CONFIG_IP6_NF_TARGET_LOG is not set +CONFIG_IP6_NF_FILTER=y +# CONFIG_IP6_NF_TARGET_REJECT is not set +# CONFIG_IP6_NF_MANGLE is not set +# CONFIG_IP6_NF_RAW is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_STP=y +CONFIG_BRIDGE=y +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +CONFIG_NET_SCH_TBF=y +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y +# CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set +# CONFIG_BE2NET is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_EZUSB is not set +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +CONFIG_USB_SERIAL_CP210X=y +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +CONFIG_CMDLINE="rw dhash_entries=1024 ihash_entries=1024 ip=10.0.1.3:10.0.1.1:10.0.1.1:255.255.255.0:zeus:eth0: root=/dev/nfs nfsroot=/nfsroot/cramfs,wsize=512,rsize=512,tcp nokgdb console=ttyUSB0,115200 memsize=252M" +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_RUNTIME_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/include/asm/mach-powertv/asic.h b/arch/mips/include/asm/mach-powertv/asic.h new file mode 100644 index 000000000000..bcad43a93ebf --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/asic.h @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _ASM_MACH_POWERTV_ASIC_H +#define _ASM_MACH_POWERTV_ASIC_H + +#include +#include + +#define DVR_CAPABLE (1<<0) +#define PCIE_CAPABLE (1<<1) +#define FFS_CAPABLE (1<<2) +#define DISPLAY_CAPABLE (1<<3) + +/* Platform Family types + * For compitability, the new value must be added in the end */ +enum family_type { + FAMILY_8500, + FAMILY_8500RNG, + FAMILY_4500, + FAMILY_1500, + FAMILY_8600, + FAMILY_4600, + FAMILY_4600VZA, + FAMILY_8600VZB, + FAMILY_1500VZE, + FAMILY_1500VZF, + FAMILIES +}; + +/* Register maps for each ASIC */ +extern const struct register_map calliope_register_map; +extern const struct register_map cronus_register_map; +extern const struct register_map zeus_register_map; + +extern struct resource dvr_cronus_resources[]; +extern struct resource dvr_zeus_resources[]; +extern struct resource non_dvr_calliope_resources[]; +extern struct resource non_dvr_cronus_resources[]; +extern struct resource non_dvr_cronuslite_resources[]; +extern struct resource non_dvr_vz_calliope_resources[]; +extern struct resource non_dvr_vze_calliope_resources[]; +extern struct resource non_dvr_vzf_calliope_resources[]; +extern struct resource non_dvr_zeus_resources[]; + +extern void powertv_platform_init(void); +extern void platform_alloc_bootmem(void); +extern enum asic_type platform_get_asic(void); +extern enum family_type platform_get_family(void); +extern int platform_supports_dvr(void); +extern int platform_supports_ffs(void); +extern int platform_supports_pcie(void); +extern int platform_supports_display(void); +extern void configure_platform(void); +extern void platform_configure_usb_ehci(void); +extern void platform_unconfigure_usb_ehci(void); +extern void platform_configure_usb_ohci(void); +extern void platform_unconfigure_usb_ohci(void); + +/* Platform Resources */ +#define ASIC_RESOURCE_GET_EXISTS 1 +extern struct resource *asic_resource_get(const char *name); +extern void platform_release_memory(void *baddr, int size); + +/* Reboot Cause */ +extern void set_reboot_cause(char code, unsigned int data, unsigned int data2); +extern void set_locked_reboot_cause(char code, unsigned int data, + unsigned int data2); + +enum sys_reboot_type { + sys_unknown_reboot = 0x00, /* Unknown reboot cause */ + sys_davic_change = 0x01, /* Reboot due to change in DAVIC + * mode */ + sys_user_reboot = 0x02, /* Reboot initiated by user */ + sys_system_reboot = 0x03, /* Reboot initiated by OS */ + sys_trap_reboot = 0x04, /* Reboot due to a CPU trap */ + sys_silent_reboot = 0x05, /* Silent reboot */ + sys_boot_ldr_reboot = 0x06, /* Bootloader reboot */ + sys_power_up_reboot = 0x07, /* Power on bootup. Older + * drivers may report as + * userReboot. */ + sys_code_change = 0x08, /* Reboot to take code change. + * Older drivers may report as + * userReboot. */ + sys_hardware_reset = 0x09, /* HW watchdog or front-panel + * reset button reset. Older + * drivers may report as + * userReboot. */ + sys_watchdogInterrupt = 0x0A /* Pre-watchdog interrupt */ +}; + +#endif /* _ASM_MACH_POWERTV_ASIC_H */ diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h new file mode 100644 index 000000000000..9a65c93782f9 --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/asic_regs.h @@ -0,0 +1,155 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __ASM_MACH_POWERTV_ASIC_H_ +#define __ASM_MACH_POWERTV_ASIC_H_ +#include + +/* ASIC types */ +enum asic_type { + ASIC_UNKNOWN, + ASIC_ZEUS, + ASIC_CALLIOPE, + ASIC_CRONUS, + ASIC_CRONUSLITE, + ASICS +}; + +/* hardcoded values read from Chip Version registers */ +#define CRONUS_10 0x0B4C1C20 +#define CRONUS_11 0x0B4C1C21 +#define CRONUSLITE_10 0x0B4C1C40 + +#define NAND_FLASH_BASE 0x03000000 +#define ZEUS_IO_BASE 0x09000000 +#define CALLIOPE_IO_BASE 0x08000000 +#define CRONUS_IO_BASE 0x09000000 +#define ASIC_IO_SIZE 0x01000000 + +/* Definitions for backward compatibility */ +#define UART1_INTSTAT uart1_intstat +#define UART1_INTEN uart1_inten +#define UART1_CONFIG1 uart1_config1 +#define UART1_CONFIG2 uart1_config2 +#define UART1_DIVISORHI uart1_divisorhi +#define UART1_DIVISORLO uart1_divisorlo +#define UART1_DATA uart1_data +#define UART1_STATUS uart1_status + +/* ASIC register enumeration */ +struct register_map { + u32 eic_slow0_strt_add; + u32 eic_cfg_bits; + u32 eic_ready_status; + + u32 chipver3; + u32 chipver2; + u32 chipver1; + u32 chipver0; + + u32 uart1_intstat; + u32 uart1_inten; + u32 uart1_config1; + u32 uart1_config2; + u32 uart1_divisorhi; + u32 uart1_divisorlo; + u32 uart1_data; + u32 uart1_status; + + u32 int_stat_3; + u32 int_stat_2; + u32 int_stat_1; + u32 int_stat_0; + u32 int_config; + u32 int_int_scan; + u32 ien_int_3; + u32 ien_int_2; + u32 ien_int_1; + u32 ien_int_0; + u32 int_level_3_3; + u32 int_level_3_2; + u32 int_level_3_1; + u32 int_level_3_0; + u32 int_level_2_3; + u32 int_level_2_2; + u32 int_level_2_1; + u32 int_level_2_0; + u32 int_level_1_3; + u32 int_level_1_2; + u32 int_level_1_1; + u32 int_level_1_0; + u32 int_level_0_3; + u32 int_level_0_2; + u32 int_level_0_1; + u32 int_level_0_0; + u32 int_docsis_en; + + u32 mips_pll_setup; + u32 usb_fs; + u32 test_bus; + u32 crt_spare; + u32 usb2_ohci_int_mask; + u32 usb2_strap; + u32 ehci_hcapbase; + u32 ohci_hc_revision; + u32 bcm1_bs_lmi_steer; + u32 usb2_control; + u32 usb2_stbus_obc; + u32 usb2_stbus_mess_size; + u32 usb2_stbus_chunk_size; + + u32 pcie_regs; + u32 tim_ch; + u32 tim_cl; + u32 gpio_dout; + u32 gpio_din; + u32 gpio_dir; + u32 watchdog; + u32 front_panel; + + u32 register_maps; +}; + +extern enum asic_type asic; +extern const struct register_map *register_map; +extern unsigned long asic_phy_base; /* Physical address of ASIC */ +extern unsigned long asic_base; /* Virtual address of ASIC */ + +/* + * Macros to interface to registers through their ioremapped address + * asic_reg_offset Returns the offset of a given register from the start + * of the ASIC address space + * asic_reg_phys_addr Returns the physical address of the given register + * asic_reg_addr Returns the iomapped virtual address of the given + * register. + */ +#define asic_reg_offset(x) (register_map->x) +#define asic_reg_phys_addr(x) (asic_phy_base + asic_reg_offset(x)) +#define asic_reg_addr(x) \ + ((unsigned int *) (asic_base + asic_reg_offset(x))) + +/* + * The asic_reg macro is gone. It should be replaced by either asic_read or + * asic_write, as appropriate. + */ + +#define asic_read(x) readl(asic_reg_addr(x)) +#define asic_write(v, x) writel(v, asic_reg_addr(x)) + +extern void asic_irq_init(void); +#endif diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h new file mode 100644 index 000000000000..5b8d5ebeb838 --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h @@ -0,0 +1,119 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Version from mach-generic modified to support PowerTV port + * Portions Copyright (C) 2009 Cisco Systems, Inc. + * Copyright (C) 2006 Ralf Baechle + * + */ + +#ifndef __ASM_MACH_POWERTV_DMA_COHERENCE_H +#define __ASM_MACH_POWERTV_DMA_COHERENCE_H + +#include +#include +#include +#include + +static inline bool is_kseg2(void *addr) +{ + return (unsigned long)addr >= KSEG2; +} + +static inline unsigned long virt_to_phys_from_pte(void *addr) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *ptep, pte; + + unsigned long virt_addr = (unsigned long)addr; + unsigned long phys_addr = 0UL; + + /* get the page global directory. */ + pgd = pgd_offset_k(virt_addr); + + if (!pgd_none(*pgd)) { + /* get the page upper directory */ + pud = pud_offset(pgd, virt_addr); + if (!pud_none(*pud)) { + /* get the page middle directory */ + pmd = pmd_offset(pud, virt_addr); + if (!pmd_none(*pmd)) { + /* get a pointer to the page table entry */ + ptep = pte_offset(pmd, virt_addr); + pte = *ptep; + /* check for a valid page */ + if (pte_present(pte)) { + /* get the physical address the page is + * refering to */ + phys_addr = (unsigned long) + page_to_phys(pte_page(pte)); + /* add the offset within the page */ + phys_addr |= (virt_addr & ~PAGE_MASK); + } + } + } + } + + return phys_addr; +} + +static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, + size_t size) +{ + if (is_kseg2(addr)) + return phys_to_bus(virt_to_phys_from_pte(addr)); + else + return phys_to_bus(virt_to_phys(addr)); +} + +static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, + struct page *page) +{ + return phys_to_bus(page_to_phys(page)); +} + +static inline unsigned long plat_dma_addr_to_phys(struct device *dev, + dma_addr_t dma_addr) +{ + return bus_to_phys(dma_addr); +} + +static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) +{ +} + +static inline int plat_dma_supported(struct device *dev, u64 mask) +{ + /* + * we fall back to GFP_DMA when the mask isn't all 1s, + * so we can't guarantee allocations that must be + * within a tighter range than GFP_DMA.. + */ + if (mask < DMA_BIT_MASK(24)) + return 0; + + return 1; +} + +static inline void plat_extra_sync_for_device(struct device *dev) +{ + return; +} + +static inline int plat_dma_mapping_error(struct device *dev, + dma_addr_t dma_addr) +{ + return 0; +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; +} + +#endif /* __ASM_MACH_POWERTV_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-powertv/interrupts.h b/arch/mips/include/asm/mach-powertv/interrupts.h new file mode 100644 index 000000000000..629a57413657 --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/interrupts.h @@ -0,0 +1,254 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _ASM_MACH_POWERTV_INTERRUPTS_H_ +#define _ASM_MACH_POWERTV_INTERRUPTS_H_ + +/* + * Defines for all of the interrupt lines + */ + +/* Definitions for backward compatibility */ +#define kIrq_Uart1 irq_uart1 + +#define ibase 0 + +/*------------- Register: int_stat_3 */ +/* 126 unused (bit 31) */ +#define irq_asc2video (ibase+126) /* ASC 2 Video Interrupt */ +#define irq_asc1video (ibase+125) /* ASC 1 Video Interrupt */ +#define irq_comms_block_wd (ibase+124) /* ASC 1 Video Interrupt */ +#define irq_fdma_mailbox (ibase+123) /* FDMA Mailbox Output */ +#define irq_fdma_gp (ibase+122) /* FDMA GP Output */ +#define irq_mips_pic (ibase+121) /* MIPS Performance Counter + * Interrupt */ +#define irq_mips_timer (ibase+120) /* MIPS Timer Interrupt */ +#define irq_memory_protect (ibase+119) /* Memory Protection Interrupt + * -- Ored by glue logic inside + * SPARC ILC (see + * INT_MEM_PROT_STAT, below, + * for individual interrupts) + */ +/* 118 unused (bit 22) */ +#define irq_sbag (ibase+117) /* SBAG Interrupt -- Ored by + * glue logic inside SPARC ILC + * (see INT_SBAG_STAT, below, + * for individual interrupts) */ +#define irq_qam_b_fec (ibase+116) /* QAM B FEC Interrupt */ +#define irq_qam_a_fec (ibase+115) /* QAM A FEC Interrupt */ +/* 114 unused (bit 18) */ +#define irq_mailbox (ibase+113) /* Mailbox Debug Interrupt -- + * Ored by glue logic inside + * SPARC ILC (see + * INT_MAILBOX_STAT, below, for + * individual interrupts) */ +#define irq_fuse_stat1 (ibase+112) /* Fuse Status 1 */ +#define irq_fuse_stat2 (ibase+111) /* Fuse Status 2 */ +#define irq_fuse_stat3 (ibase+110) /* Blitter Interrupt / Fuse + * Status 3 */ +#define irq_blitter (ibase+110) /* Blitter Interrupt / Fuse + * Status 3 */ +#define irq_avc1_pp0 (ibase+109) /* AVC Decoder #1 PP0 + * Interrupt */ +#define irq_avc1_pp1 (ibase+108) /* AVC Decoder #1 PP1 + * Interrupt */ +#define irq_avc1_mbe (ibase+107) /* AVC Decoder #1 MBE + * Interrupt */ +#define irq_avc2_pp0 (ibase+106) /* AVC Decoder #2 PP0 + * Interrupt */ +#define irq_avc2_pp1 (ibase+105) /* AVC Decoder #2 PP1 + * Interrupt */ +#define irq_avc2_mbe (ibase+104) /* AVC Decoder #2 MBE + * Interrupt */ +#define irq_zbug_spi (ibase+103) /* Zbug SPI Slave Interrupt */ +#define irq_qam_mod2 (ibase+102) /* QAM Modulator 2 DMA + * Interrupt */ +#define irq_ir_rx (ibase+101) /* IR RX 2 Interrupt */ +#define irq_aud_dsp2 (ibase+100) /* Audio DSP #2 Interrupt */ +#define irq_aud_dsp1 (ibase+99) /* Audio DSP #1 Interrupt */ +#define irq_docsis (ibase+98) /* DOCSIS Debug Interrupt */ +#define irq_sd_dvp1 (ibase+97) /* SD DVP #1 Interrupt */ +#define irq_sd_dvp2 (ibase+96) /* SD DVP #2 Interrupt */ +/*------------- Register: int_stat_2 */ +#define irq_hd_dvp (ibase+95) /* HD DVP Interrupt */ +#define kIrq_Prewatchdog (ibase+94) /* watchdog Pre-Interrupt */ +#define irq_timer2 (ibase+93) /* Programmable Timer + * Interrupt 2 */ +#define irq_1394 (ibase+92) /* 1394 Firewire Interrupt */ +#define irq_usbohci (ibase+91) /* USB 2.0 OHCI Interrupt */ +#define irq_usbehci (ibase+90) /* USB 2.0 EHCI Interrupt */ +#define irq_pciexp (ibase+89) /* PCI Express 0 Interrupt */ +#define irq_pciexp0 (ibase+89) /* PCI Express 0 Interrupt */ +#define irq_afe1 (ibase+88) /* AFE 1 Interrupt */ +#define irq_sata (ibase+87) /* SATA 1 Interrupt */ +#define irq_sata1 (ibase+87) /* SATA 1 Interrupt */ +#define irq_dtcp (ibase+86) /* DTCP Interrupt */ +#define irq_pciexp1 (ibase+85) /* PCI Express 1 Interrupt */ +/* 84 unused (bit 20) */ +/* 83 unused (bit 19) */ +/* 82 unused (bit 18) */ +#define irq_sata2 (ibase+81) /* SATA2 Interrupt */ +#define irq_uart2 (ibase+80) /* UART2 Interrupt */ +#define irq_legacy_usb (ibase+79) /* Legacy USB Host ISR (1.1 + * Host module) */ +#define irq_pod (ibase+78) /* POD Interrupt */ +#define irq_slave_usb (ibase+77) /* Slave USB */ +#define irq_denc1 (ibase+76) /* DENC #1 VTG Interrupt */ +#define irq_vbi_vtg (ibase+75) /* VBI VTG Interrupt */ +#define irq_afe2 (ibase+74) /* AFE 2 Interrupt */ +#define irq_denc2 (ibase+73) /* DENC #2 VTG Interrupt */ +#define irq_asc2 (ibase+72) /* ASC #2 Interrupt */ +#define irq_asc1 (ibase+71) /* ASC #1 Interrupt */ +#define irq_mod_dma (ibase+70) /* Modulator DMA Interrupt */ +#define irq_byte_eng1 (ibase+69) /* Byte Engine Interrupt [1] */ +#define irq_byte_eng0 (ibase+68) /* Byte Engine Interrupt [0] */ +/* 67 unused (bit 03) */ +/* 66 unused (bit 02) */ +/* 65 unused (bit 01) */ +/* 64 unused (bit 00) */ +/*------------- Register: int_stat_1 */ +/* 63 unused (bit 31) */ +/* 62 unused (bit 30) */ +/* 61 unused (bit 29) */ +/* 60 unused (bit 28) */ +/* 59 unused (bit 27) */ +/* 58 unused (bit 26) */ +/* 57 unused (bit 25) */ +/* 56 unused (bit 24) */ +#define irq_buf_dma_mem2mem (ibase+55) /* BufDMA Memory to Memory + * Interrupt */ +#define irq_buf_dma_usbtransmit (ibase+54) /* BufDMA USB Transmit + * Interrupt */ +#define irq_buf_dma_qpskpodtransmit (ibase+53) /* BufDMA QPSK/POD Tramsit + * Interrupt */ +#define irq_buf_dma_transmit_error (ibase+52) /* BufDMA Transmit Error + * Interrupt */ +#define irq_buf_dma_usbrecv (ibase+51) /* BufDMA USB Receive + * Interrupt */ +#define irq_buf_dma_qpskpodrecv (ibase+50) /* BufDMA QPSK/POD Receive + * Interrupt */ +#define irq_buf_dma_recv_error (ibase+49) /* BufDMA Receive Error + * Interrupt */ +#define irq_qamdma_transmit_play (ibase+48) /* QAMDMA Transmit/Play + * Interrupt */ +#define irq_qamdma_transmit_error (ibase+47) /* QAMDMA Transmit Error + * Interrupt */ +#define irq_qamdma_recv2high (ibase+46) /* QAMDMA Receive 2 High + * (Chans 63-32) */ +#define irq_qamdma_recv2low (ibase+45) /* QAMDMA Receive 2 Low + * (Chans 31-0) */ +#define irq_qamdma_recv1high (ibase+44) /* QAMDMA Receive 1 High + * (Chans 63-32) */ +#define irq_qamdma_recv1low (ibase+43) /* QAMDMA Receive 1 Low + * (Chans 31-0) */ +#define irq_qamdma_recv_error (ibase+42) /* QAMDMA Receive Error + * Interrupt */ +#define irq_mpegsplice (ibase+41) /* MPEG Splice Interrupt */ +#define irq_deinterlace_rdy (ibase+40) /* Deinterlacer Frame Ready + * Interrupt */ +#define irq_ext_in0 (ibase+39) /* External Interrupt irq_in0 */ +#define irq_gpio3 (ibase+38) /* GP I/O IRQ 3 - From GP I/O + * Module */ +#define irq_gpio2 (ibase+37) /* GP I/O IRQ 2 - From GP I/O + * Module (ABE_intN) */ +#define irq_pcrcmplt1 (ibase+36) /* PCR Capture Complete or + * Discontinuity 1 */ +#define irq_pcrcmplt2 (ibase+35) /* PCR Capture Complete or + * Discontinuity 2 */ +#define irq_parse_peierr (ibase+34) /* PID Parser Error Detect + * (PEI) */ +#define irq_parse_cont_err (ibase+33) /* PID Parser continuity error + * detect */ +#define irq_ds1framer (ibase+32) /* DS1 Framer Interrupt */ +/*------------- Register: int_stat_0 */ +#define irq_gpio1 (ibase+31) /* GP I/O IRQ 1 - From GP I/O + * Module */ +#define irq_gpio0 (ibase+30) /* GP I/O IRQ 0 - From GP I/O + * Module */ +#define irq_qpsk_out_aloha (ibase+29) /* QPSK Output Slotted Aloha + * (chan 3) Transmission + * Completed OK */ +#define irq_qpsk_out_tdma (ibase+28) /* QPSK Output TDMA (chan 2) + * Transmission Completed OK */ +#define irq_qpsk_out_reserve (ibase+27) /* QPSK Output Reservation + * (chan 1) Transmission + * Completed OK */ +#define irq_qpsk_out_aloha_err (ibase+26) /* QPSK Output Slotted Aloha + * (chan 3)Transmission + * completed with Errors. */ +#define irq_qpsk_out_tdma_err (ibase+25) /* QPSK Output TDMA (chan 2) + * Transmission completed with + * Errors. */ +#define irq_qpsk_out_rsrv_err (ibase+24) /* QPSK Output Reservation + * (chan 1) Transmission + * completed with Errors */ +#define irq_aloha_fail (ibase+23) /* Unsuccessful Resend of Aloha + * for N times. Aloha retry + * timeout for channel 3. */ +#define irq_timer1 (ibase+22) /* Programmable Timer + * Interrupt */ +#define irq_keyboard (ibase+21) /* Keyboard Module Interrupt */ +#define irq_i2c (ibase+20) /* I2C Module Interrupt */ +#define irq_spi (ibase+19) /* SPI Module Interrupt */ +#define irq_irblaster (ibase+18) /* IR Blaster Interrupt */ +#define irq_splice_detect (ibase+17) /* PID Key Change Interrupt or + * Splice Detect Interrupt */ +#define irq_se_micro (ibase+16) /* Secure Micro I/F Module + * Interrupt */ +#define irq_uart1 (ibase+15) /* UART Interrupt */ +#define irq_irrecv (ibase+14) /* IR Receiver Interrupt */ +#define irq_host_int1 (ibase+13) /* Host-to-Host Interrupt 1 */ +#define irq_host_int0 (ibase+12) /* Host-to-Host Interrupt 0 */ +#define irq_qpsk_hecerr (ibase+11) /* QPSK HEC Error Interrupt */ +#define irq_qpsk_crcerr (ibase+10) /* QPSK AAL-5 CRC Error + * Interrupt */ +/* 9 unused (bit 09) */ +/* 8 unused (bit 08) */ +#define irq_psicrcerr (ibase+7) /* QAM PSI CRC Error + * Interrupt */ +#define irq_psilength_err (ibase+6) /* QAM PSI Length Error + * Interrupt */ +#define irq_esfforward (ibase+5) /* ESF Interrupt Mark From + * Forward Path Reference - + * every 3ms when forward Mbits + * and forward slot control + * bytes are updated. */ +#define irq_esfreverse (ibase+4) /* ESF Interrupt Mark from + * Reverse Path Reference - + * delayed from forward mark by + * the ranging delay plus a + * fixed amount. When reverse + * Mbits and reverse slot + * control bytes are updated. + * Occurs every 3ms for 3.0M and + * 1.554 M upstream rates and + * every 6 ms for 256K upstream + * rate. */ +#define irq_aloha_timeout (ibase+3) /* Slotted-Aloha timeout on + * Channel 1. */ +#define irq_reservation (ibase+2) /* Partial (or Incremental) + * Reservation Message Completed + * or Slotted aloha verify for + * channel 1. */ +#define irq_aloha3 (ibase+1) /* Slotted-Aloha Message Verify + * Interrupt or Reservation + * increment completed for + * channel 3. */ +#define irq_mpeg_d (ibase+0) /* MPEG Decoder Interrupt */ +#endif /* _ASM_MACH_POWERTV_INTERRUPTS_H_ */ + diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h new file mode 100644 index 000000000000..e6276d5146e8 --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/ioremap.h @@ -0,0 +1,90 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Portions Copyright (C) Cisco Systems, Inc. + */ +#ifndef __ASM_MACH_POWERTV_IOREMAP_H +#define __ASM_MACH_POWERTV_IOREMAP_H + +#include + +#define LOW_MEM_BOUNDARY_PHYS 0x20000000 +#define LOW_MEM_BOUNDARY_MASK (~(LOW_MEM_BOUNDARY_PHYS - 1)) + +/* + * The bus addresses are different than the physical addresses that + * the processor sees by an offset. This offset varies by ASIC + * version. Define a variable to hold the offset and some macros to + * make the conversion simpler. */ +extern unsigned long phys_to_bus_offset; + +#ifdef CONFIG_HIGHMEM +#define MEM_GAP_PHYS 0x60000000 +/* + * TODO: We will use the hard code for conversion between physical and + * bus until the bootloader releases their device tree to us. + */ +#define phys_to_bus(x) (((x) < LOW_MEM_BOUNDARY_PHYS) ? \ + ((x) + phys_to_bus_offset) : (x)) +#define bus_to_phys(x) (((x) < MEM_GAP_PHYS_ADDR) ? \ + ((x) - phys_to_bus_offset) : (x)) +#else +#define phys_to_bus(x) ((x) + phys_to_bus_offset) +#define bus_to_phys(x) ((x) - phys_to_bus_offset) +#endif + +/* + * Determine whether the address we are given is for an ASIC device + * Params: addr Address to check + * Returns: Zero if the address is not for ASIC devices, non-zero + * if it is. + */ +static inline int asic_is_device_addr(phys_t addr) +{ + return !((phys_t)addr & (phys_t) LOW_MEM_BOUNDARY_MASK); +} + +/* + * Determine whether the address we are given is external RAM mappable + * into KSEG1. + * Params: addr Address to check + * Returns: Zero if the address is not for external RAM and + */ +static inline int asic_is_lowmem_ram_addr(phys_t addr) +{ + /* + * The RAM always starts at the following address in the processor's + * physical address space + */ + static const phys_t phys_ram_base = 0x10000000; + phys_t bus_ram_base; + + bus_ram_base = phys_to_bus_offset + phys_ram_base; + + return addr >= bus_ram_base && + addr < (bus_ram_base + (LOW_MEM_BOUNDARY_PHYS - phys_ram_base)); +} + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return 0; +} +#endif /* __ASM_MACH_POWERTV_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-powertv/irq.h b/arch/mips/include/asm/mach-powertv/irq.h new file mode 100644 index 000000000000..4bd5d0c61a91 --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/irq.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _ASM_MACH_POWERTV_IRQ_H +#define _ASM_MACH_POWERTV_IRQ_H +#include + +#define MIPS_CPU_IRQ_BASE ibase +#define NR_IRQS 127 +#endif diff --git a/arch/mips/include/asm/mach-powertv/powertv-clock.h b/arch/mips/include/asm/mach-powertv/powertv-clock.h new file mode 100644 index 000000000000..6f3e9a0fcf8c --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/powertv-clock.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +/* + * Local definitions for the powertv PCI code + */ + +#ifndef _POWERTV_PCI_POWERTV_PCI_H_ +#define _POWERTV_PCI_POWERTV_PCI_H_ +extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +extern int asic_pcie_init(void); +extern int asic_pcie_init(void); + +extern int log_level; +#endif diff --git a/arch/mips/include/asm/mach-powertv/war.h b/arch/mips/include/asm/mach-powertv/war.h new file mode 100644 index 000000000000..7ac05ecc512b --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/war.h @@ -0,0 +1,28 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * This version for the PowerTV platform copied from the Malta version. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + * Portions copyright (C) 2009 Cisco Systems, Inc. + */ +#ifndef __ASM_MACH_POWERTV_WAR_H +#define __ASM_MACH_POWERTV_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 1 +#define MIPS_CACHE_SYNC_WAR 1 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MACH_POWERTV_WAR_H */ diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index eecd2a9f155c..a446aa20ac83 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o +obj-$(CONFIG_CSRC_POWERTV) += csrc-powertv.o obj-$(CONFIG_CSRC_R4K_LIB) += csrc-r4k.o obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o obj-$(CONFIG_SYNC_R4K) += sync-r4k.o diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c new file mode 100644 index 000000000000..a27c16c8690e --- /dev/null +++ b/arch/mips/kernel/csrc-powertv.c @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2008 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* + * The file comes from kernel/csrc-r4k.c + */ +#include +#include + +#include /* Not included in linux/time.h */ + +#include +#include "powertv-clock.h" + +/* MIPS PLL Register Definitions */ +#define PLL_GET_M(x) (((x) >> 8) & 0x000000FF) +#define PLL_GET_N(x) (((x) >> 16) & 0x000000FF) +#define PLL_GET_P(x) (((x) >> 24) & 0x00000007) + +/* + * returns: Clock frequency in kHz + */ +unsigned int __init mips_get_pll_freq(void) +{ + unsigned int pll_reg, m, n, p; + unsigned int fin = 54000; /* Base frequency in kHz */ + unsigned int fout; + + /* Read PLL register setting */ + pll_reg = asic_read(mips_pll_setup); + m = PLL_GET_M(pll_reg); + n = PLL_GET_N(pll_reg); + p = PLL_GET_P(pll_reg); + pr_info("MIPS PLL Register:0x%x M=%d N=%d P=%d\n", pll_reg, m, n, p); + + /* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */ + fout = ((2 * n * fin) / (m * (0x01 << p))); + + pr_info("MIPS Clock Freq=%d kHz\n", fout); + + return fout; +} + +static cycle_t c0_hpt_read(struct clocksource *cs) +{ + return read_c0_count(); +} + +static struct clocksource clocksource_mips = { + .name = "powertv-counter", + .read = c0_hpt_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init powertv_c0_hpt_clocksource_init(void) +{ + unsigned int pll_freq = mips_get_pll_freq(); + + pr_info("CPU frequency %d.%02d MHz\n", pll_freq / 1000, + (pll_freq % 1000) * 100 / 1000); + + mips_hpt_frequency = pll_freq / 2 * 1000; + + clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; + + clocksource_set_clock(&clocksource_mips, mips_hpt_frequency); + + clocksource_register(&clocksource_mips); +} + +/** + * struct tim_c - free running counter + * @hi: High 16 bits of the counter + * @lo: Low 32 bits of the counter + * + * Lays out the structure of the free running counter in memory. This counter + * increments at a rate of 27 MHz/8 on all platforms. + */ +struct tim_c { + unsigned int hi; + unsigned int lo; +}; + +static struct tim_c *tim_c; + +static cycle_t tim_c_read(struct clocksource *cs) +{ + unsigned int hi; + unsigned int next_hi; + unsigned int lo; + + hi = readl(&tim_c->hi); + + for (;;) { + lo = readl(&tim_c->lo); + next_hi = readl(&tim_c->hi); + if (next_hi == hi) + break; + hi = next_hi; + } + +pr_crit("%s: read %llx\n", __func__, ((u64) hi << 32) | lo); + return ((u64) hi << 32) | lo; +} + +#define TIM_C_SIZE 48 /* # bits in the timer */ + +static struct clocksource clocksource_tim_c = { + .name = "powertv-tim_c", + .read = tim_c_read, + .mask = CLOCKSOURCE_MASK(TIM_C_SIZE), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +/** + * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock + * + * The hard part here is coming up with a constant k and shift s such that + * the 48-bit TIM_C value multiplied by k doesn't overflow and that value, + * when shifted right by s, yields the corresponding number of nanoseconds. + * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to + * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the + * number of nanoseconds. Since the TIM_C value has 48 bits and the math is + * done in 64 bits, avoiding an overflow means that k must be less than + * 64 - 48 = 16 bits. + */ +static void __init powertv_tim_c_clocksource_init(void) +{ + int prescale; + unsigned long dividend; + unsigned long k; + int s; + const int max_k_bits = (64 - 48) - 1; + const unsigned long billion = 1000000000; + const unsigned long counts_per_second = 27000000 / 8; + + prescale = BITS_PER_LONG - ilog2(billion) - 1; + dividend = billion << prescale; + k = dividend / counts_per_second; + s = ilog2(k) - max_k_bits; + + if (s < 0) + s = prescale; + + else { + k >>= s; + s += prescale; + } + + clocksource_tim_c.mult = k; + clocksource_tim_c.shift = s; + clocksource_tim_c.rating = 200; + + clocksource_register(&clocksource_tim_c); + tim_c = (struct tim_c *) asic_reg_addr(tim_ch); +} + +/** + powertv_clocksource_init - initialize all clocksources + */ +void __init powertv_clocksource_init(void) +{ + powertv_c0_hpt_clocksource_init(); + powertv_tim_c_clocksource_init(); +} diff --git a/arch/mips/powertv/Kconfig b/arch/mips/powertv/Kconfig new file mode 100644 index 000000000000..ff0e7e3e6954 --- /dev/null +++ b/arch/mips/powertv/Kconfig @@ -0,0 +1,21 @@ +source "arch/mips/powertv/asic/Kconfig" + +config BOOTLOADER_DRIVER + bool "PowerTV Bootloader Driver Support" + default n + depends on POWERTV + help + Use this option if you want to load bootloader driver. + +config BOOTLOADER_FAMILY + string "POWERTV Bootloader Family string" + default "85" + depends on POWERTV && !BOOTLOADER_DRIVER + help + This value should be specified when the bootloader driver is disabled + and must be exactly two characters long. Families supported are: + R1 - RNG-100 R2 - RNG-200 + A1 - Class A B1 - Class B + E1 - Class E F1 - Class F + 44 - 45xx 46 - 46xx + 85 - 85xx 86 - 86xx diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile new file mode 100644 index 000000000000..2c516718affe --- /dev/null +++ b/arch/mips/powertv/Makefile @@ -0,0 +1,28 @@ +# +# Carsten Langgaard, carstenl@mips.com +# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. +# +# Carsten Langgaard, carstenl@mips.com +# Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. +# Portions copyright (C) 2009 Cisco Systems, Inc. +# +# This program is free software; you can distribute it and/or modify it +# under the terms of the GNU General Public License (Version 2) as +# published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +# +# Makefile for the Cisco PowerTV-specific kernel interface routines +# under Linux. +# + +obj-y += cmdline.o init.o memory.o reset.o time.o powertv_setup.o asic/ pci/ + +EXTRA_CFLAGS += -Wall -Werror diff --git a/arch/mips/powertv/asic/Kconfig b/arch/mips/powertv/asic/Kconfig new file mode 100644 index 000000000000..2016bfe94d66 --- /dev/null +++ b/arch/mips/powertv/asic/Kconfig @@ -0,0 +1,28 @@ +config MIN_RUNTIME_RESOURCES + bool "Support for minimum runtime resources" + default n + depends on POWERTV + help + Enables support for minimizing the number of (SA asic) runtime + resources that are preallocated by the kernel. + +config MIN_RUNTIME_DOCSIS + bool "Support for minimum DOCSIS resource" + default y + depends on MIN_RUNTIME_RESOURCES + help + Enables support for the preallocated DOCSIS resource. + +config MIN_RUNTIME_PMEM + bool "Support for minimum PMEM resource" + default y + depends on MIN_RUNTIME_RESOURCES + help + Enables support for the preallocated Memory resource. + +config MIN_RUNTIME_TFTP + bool "Support for minimum TFTP resource" + default y + depends on MIN_RUNTIME_RESOURCES + help + Enables support for the preallocated TFTP resource. diff --git a/arch/mips/powertv/asic/Makefile b/arch/mips/powertv/asic/Makefile new file mode 100644 index 000000000000..bebfdcff0443 --- /dev/null +++ b/arch/mips/powertv/asic/Makefile @@ -0,0 +1,23 @@ +# +# Copyright (C) 2009 Scientific-Atlanta, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +obj-y += asic-calliope.o asic-cronus.o asic-zeus.o asic_devices.o asic_int.o \ + irq_asic.o prealloc-calliope.o prealloc-cronus.o \ + prealloc-cronuslite.o prealloc-zeus.o + +EXTRA_CFLAGS += -Wall -Werror diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c new file mode 100644 index 000000000000..03d3884c6270 --- /dev/null +++ b/arch/mips/powertv/asic/asic-calliope.c @@ -0,0 +1,98 @@ +/* + * Locations of devices in the Calliope ASIC. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + * + * Description: Defines the platform resources for the SA settop. + */ + +#include + +const struct register_map calliope_register_map = { + .eic_slow0_strt_add = 0x800000, + .eic_cfg_bits = 0x800038, + .eic_ready_status = 0x80004c, + + .chipver3 = 0xA00800, + .chipver2 = 0xA00804, + .chipver1 = 0xA00808, + .chipver0 = 0xA0080c, + + /* The registers of IRBlaster */ + .uart1_intstat = 0xA01800, + .uart1_inten = 0xA01804, + .uart1_config1 = 0xA01808, + .uart1_config2 = 0xA0180C, + .uart1_divisorhi = 0xA01810, + .uart1_divisorlo = 0xA01814, + .uart1_data = 0xA01818, + .uart1_status = 0xA0181C, + + .int_stat_3 = 0xA02800, + .int_stat_2 = 0xA02804, + .int_stat_1 = 0xA02808, + .int_stat_0 = 0xA0280c, + .int_config = 0xA02810, + .int_int_scan = 0xA02818, + .ien_int_3 = 0xA02830, + .ien_int_2 = 0xA02834, + .ien_int_1 = 0xA02838, + .ien_int_0 = 0xA0283c, + .int_level_3_3 = 0xA02880, + .int_level_3_2 = 0xA02884, + .int_level_3_1 = 0xA02888, + .int_level_3_0 = 0xA0288c, + .int_level_2_3 = 0xA02890, + .int_level_2_2 = 0xA02894, + .int_level_2_1 = 0xA02898, + .int_level_2_0 = 0xA0289c, + .int_level_1_3 = 0xA028a0, + .int_level_1_2 = 0xA028a4, + .int_level_1_1 = 0xA028a8, + .int_level_1_0 = 0xA028ac, + .int_level_0_3 = 0xA028b0, + .int_level_0_2 = 0xA028b4, + .int_level_0_1 = 0xA028b8, + .int_level_0_0 = 0xA028bc, + .int_docsis_en = 0xA028F4, + + .mips_pll_setup = 0x980000, + .usb_fs = 0x980030, /* -default 72800028- */ + .test_bus = 0x9800CC, + .crt_spare = 0x9800d4, + .usb2_ohci_int_mask = 0x9A000c, + .usb2_strap = 0x9A0014, + .ehci_hcapbase = 0x9BFE00, + .ohci_hc_revision = 0x9BFC00, + .bcm1_bs_lmi_steer = 0x9E0004, + .usb2_control = 0x9E0054, + .usb2_stbus_obc = 0x9BFF00, + .usb2_stbus_mess_size = 0x9BFF04, + .usb2_stbus_chunk_size = 0x9BFF08, + + .pcie_regs = 0x000000, /* -doesn't exist- */ + .tim_ch = 0xA02C10, + .tim_cl = 0xA02C14, + .gpio_dout = 0xA02c20, + .gpio_din = 0xA02c24, + .gpio_dir = 0xA02c2C, + .watchdog = 0xA02c30, + .front_panel = 0x000000, /* -not used- */ +}; diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c new file mode 100644 index 000000000000..5f4589c9f83d --- /dev/null +++ b/arch/mips/powertv/asic/asic-cronus.c @@ -0,0 +1,98 @@ +/* + * Locations of devices in the Cronus ASIC + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + * + * Description: Defines the platform resources for the SA settop. + */ + +#include + +const struct register_map cronus_register_map = { + .eic_slow0_strt_add = 0x000000, + .eic_cfg_bits = 0x000038, + .eic_ready_status = 0x00004C, + + .chipver3 = 0x2A0800, + .chipver2 = 0x2A0804, + .chipver1 = 0x2A0808, + .chipver0 = 0x2A080C, + + /* The registers of IRBlaster */ + .uart1_intstat = 0x2A1800, + .uart1_inten = 0x2A1804, + .uart1_config1 = 0x2A1808, + .uart1_config2 = 0x2A180C, + .uart1_divisorhi = 0x2A1810, + .uart1_divisorlo = 0x2A1814, + .uart1_data = 0x2A1818, + .uart1_status = 0x2A181C, + + .int_stat_3 = 0x2A2800, + .int_stat_2 = 0x2A2804, + .int_stat_1 = 0x2A2808, + .int_stat_0 = 0x2A280C, + .int_config = 0x2A2810, + .int_int_scan = 0x2A2818, + .ien_int_3 = 0x2A2830, + .ien_int_2 = 0x2A2834, + .ien_int_1 = 0x2A2838, + .ien_int_0 = 0x2A283C, + .int_level_3_3 = 0x2A2880, + .int_level_3_2 = 0x2A2884, + .int_level_3_1 = 0x2A2888, + .int_level_3_0 = 0x2A288C, + .int_level_2_3 = 0x2A2890, + .int_level_2_2 = 0x2A2894, + .int_level_2_1 = 0x2A2898, + .int_level_2_0 = 0x2A289C, + .int_level_1_3 = 0x2A28A0, + .int_level_1_2 = 0x2A28A4, + .int_level_1_1 = 0x2A28A8, + .int_level_1_0 = 0x2A28AC, + .int_level_0_3 = 0x2A28B0, + .int_level_0_2 = 0x2A28B4, + .int_level_0_1 = 0x2A28B8, + .int_level_0_0 = 0x2A28BC, + .int_docsis_en = 0x2A28F4, + + .mips_pll_setup = 0x1C0000, + .usb_fs = 0x1C0018, + .test_bus = 0x1C00CC, + .crt_spare = 0x1c00d4, + .usb2_ohci_int_mask = 0x20000C, + .usb2_strap = 0x200014, + .ehci_hcapbase = 0x21FE00, + .ohci_hc_revision = 0x1E0000, + .bcm1_bs_lmi_steer = 0x2E0008, + .usb2_control = 0x2E004C, + .usb2_stbus_obc = 0x21FF00, + .usb2_stbus_mess_size = 0x21FF04, + .usb2_stbus_chunk_size = 0x21FF08, + + .pcie_regs = 0x220000, + .tim_ch = 0x2A2C10, + .tim_cl = 0x2A2C14, + .gpio_dout = 0x2A2C20, + .gpio_din = 0x2A2C24, + .gpio_dir = 0x2A2C2C, + .watchdog = 0x2A2C30, + .front_panel = 0x2A3800, +}; diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c new file mode 100644 index 000000000000..1469daab920e --- /dev/null +++ b/arch/mips/powertv/asic/asic-zeus.c @@ -0,0 +1,98 @@ +/* + * Locations of devices in the Zeus ASIC + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + * + * Description: Defines the platform resources for the SA settop. + */ + +#include + +const struct register_map zeus_register_map = { + .eic_slow0_strt_add = 0x000000, + .eic_cfg_bits = 0x000038, + .eic_ready_status = 0x00004c, + + .chipver3 = 0x280800, + .chipver2 = 0x280804, + .chipver1 = 0x280808, + .chipver0 = 0x28080c, + + /* The registers of IRBlaster */ + .uart1_intstat = 0x281800, + .uart1_inten = 0x281804, + .uart1_config1 = 0x281808, + .uart1_config2 = 0x28180C, + .uart1_divisorhi = 0x281810, + .uart1_divisorlo = 0x281814, + .uart1_data = 0x281818, + .uart1_status = 0x28181C, + + .int_stat_3 = 0x282800, + .int_stat_2 = 0x282804, + .int_stat_1 = 0x282808, + .int_stat_0 = 0x28280c, + .int_config = 0x282810, + .int_int_scan = 0x282818, + .ien_int_3 = 0x282830, + .ien_int_2 = 0x282834, + .ien_int_1 = 0x282838, + .ien_int_0 = 0x28283c, + .int_level_3_3 = 0x282880, + .int_level_3_2 = 0x282884, + .int_level_3_1 = 0x282888, + .int_level_3_0 = 0x28288c, + .int_level_2_3 = 0x282890, + .int_level_2_2 = 0x282894, + .int_level_2_1 = 0x282898, + .int_level_2_0 = 0x28289c, + .int_level_1_3 = 0x2828a0, + .int_level_1_2 = 0x2828a4, + .int_level_1_1 = 0x2828a8, + .int_level_1_0 = 0x2828ac, + .int_level_0_3 = 0x2828b0, + .int_level_0_2 = 0x2828b4, + .int_level_0_1 = 0x2828b8, + .int_level_0_0 = 0x2828bc, + .int_docsis_en = 0x2828F4, + + .mips_pll_setup = 0x1a0000, + .usb_fs = 0x1a0018, + .test_bus = 0x1a0238, + .crt_spare = 0x1a0090, + .usb2_ohci_int_mask = 0x1e000c, + .usb2_strap = 0x1e0014, + .ehci_hcapbase = 0x1FFE00, + .ohci_hc_revision = 0x1FFC00, + .bcm1_bs_lmi_steer = 0x2C0008, + .usb2_control = 0x2c01a0, + .usb2_stbus_obc = 0x1FFF00, + .usb2_stbus_mess_size = 0x1FFF04, + .usb2_stbus_chunk_size = 0x1FFF08, + + .pcie_regs = 0x200000, + .tim_ch = 0x282C10, + .tim_cl = 0x282C14, + .gpio_dout = 0x282c20, + .gpio_din = 0x282c24, + .gpio_dir = 0x282c2C, + .watchdog = 0x282c30, + .front_panel = 0x283800, +}; diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c new file mode 100644 index 000000000000..bae82880b6b5 --- /dev/null +++ b/arch/mips/powertv/asic/asic_devices.c @@ -0,0 +1,787 @@ +/* + * ASIC Device List Intialization + * + * Description: Defines the platform resources for the SA settop. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + * + * Description: Defines the platform resources for the SA settop. + * + * NOTE: The bootloader allocates persistent memory at an address which is + * 16 MiB below the end of the highest address in KSEG0. All fixed + * address memory reservations must avoid this region. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#ifdef CONFIG_BOOTLOADER_DRIVER +#include +#endif +#include + +#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0)) + +/* + * Forward Prototypes + */ +static void pmem_setup_resource(void); + +/* + * Global Variables + */ +enum asic_type asic; + +unsigned int platform_features; +unsigned int platform_family; +const struct register_map *register_map; +EXPORT_SYMBOL(register_map); /* Exported for testing */ +unsigned long asic_phy_base; +unsigned long asic_base; +EXPORT_SYMBOL(asic_base); /* Exported for testing */ +struct resource *gp_resources; +static bool usb_configured; + +/* + * Don't recommend to use it directly, it is usually used by kernel internally. + * Portable code should be using interfaces such as ioremp, dma_map_single, etc. + */ +unsigned long phys_to_bus_offset; +EXPORT_SYMBOL(phys_to_bus_offset); + +/* + * + * IO Resource Definition + * + */ + +struct resource asic_resource = { + .name = "ASIC Resource", + .start = 0, + .end = ASIC_IO_SIZE, + .flags = IORESOURCE_MEM, +}; + +/* + * + * USB Host Resource Definition + * + */ + +static struct resource ehci_resources[] = { + { + .parent = &asic_resource, + .start = 0, + .end = 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = irq_usbehci, + .end = irq_usbehci, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ehci_dmamask = DMA_BIT_MASK(32); + +static struct platform_device ehci_device = { + .name = "powertv-ehci", + .id = 0, + .num_resources = 2, + .resource = ehci_resources, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource ohci_resources[] = { + { + .parent = &asic_resource, + .start = 0, + .end = 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = irq_usbohci, + .end = irq_usbohci, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ohci_dmamask = DMA_BIT_MASK(32); + +static struct platform_device ohci_device = { + .name = "powertv-ohci", + .id = 0, + .num_resources = 2, + .resource = ohci_resources, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct platform_device *platform_devices[] = { + &ehci_device, + &ohci_device, +}; + +/* + * + * Platform Configuration and Device Initialization + * + */ +static void __init fs_update(int pe, int md, int sdiv, int disable_div_by_3) +{ + int en_prg, byp, pwr, nsb, val; + int sout; + + sout = 1; + en_prg = 1; + byp = 0; + nsb = 1; + pwr = 1; + + val = ((sdiv << 29) | (md << 24) | (pe<<8) | (sout<<3) | (byp<<2) | + (nsb<<1) | (disable_div_by_3<<5)); + + asic_write(val, usb_fs); + asic_write(val | (en_prg<<4), usb_fs); + asic_write(val | (en_prg<<4) | pwr, usb_fs); +} + +/* + * Allow override of bootloader-specified model + */ +static char __initdata cmdline[COMMAND_LINE_SIZE]; + +#define FORCEFAMILY_PARAM "forcefamily" + +static __init int check_forcefamily(unsigned char forced_family[2]) +{ + const char *p; + + forced_family[0] = '\0'; + forced_family[1] = '\0'; + + /* Check the command line for a forcefamily directive */ + strncpy(cmdline, arcs_cmdline, COMMAND_LINE_SIZE - 1); + p = strstr(cmdline, FORCEFAMILY_PARAM); + if (p && (p != cmdline) && (*(p - 1) != ' ')) + p = strstr(p, " " FORCEFAMILY_PARAM "="); + + if (p) { + p += strlen(FORCEFAMILY_PARAM "="); + + if (*p == '\0' || *(p + 1) == '\0' || + (*(p + 2) != '\0' && *(p + 2) != ' ')) + pr_err(FORCEFAMILY_PARAM " must be exactly two " + "characters long, ignoring value\n"); + + else { + forced_family[0] = *p; + forced_family[1] = *(p + 1); + } + } + + return 0; +} + +/* + * platform_set_family - determine major platform family type. + * + * Returns family type; -1 if none + * Returns the family type; -1 if none + * + */ +static __init noinline void platform_set_family(void) +{ +#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0)) + + unsigned char forced_family[2]; + unsigned short bootldr_family; + + check_forcefamily(forced_family); + + if (forced_family[0] != '\0' && forced_family[1] != '\0') + bootldr_family = BOOTLDRFAMILY(forced_family[0], + forced_family[1]); + else { + +#ifdef CONFIG_BOOTLOADER_DRIVER + bootldr_family = (unsigned short) kbldr_GetSWFamily(); +#else +#if defined(CONFIG_BOOTLOADER_FAMILY) + bootldr_family = (unsigned short) BOOTLDRFAMILY( + CONFIG_BOOTLOADER_FAMILY[0], + CONFIG_BOOTLOADER_FAMILY[1]); +#else +#error "Unknown Bootloader Family" +#endif +#endif + } + + pr_info("Bootloader Family = 0x%04X\n", bootldr_family); + + switch (bootldr_family) { + case BOOTLDRFAMILY('R', '1'): + platform_family = FAMILY_1500; + break; + case BOOTLDRFAMILY('4', '4'): + platform_family = FAMILY_4500; + break; + case BOOTLDRFAMILY('4', '6'): + platform_family = FAMILY_4600; + break; + case BOOTLDRFAMILY('A', '1'): + platform_family = FAMILY_4600VZA; + break; + case BOOTLDRFAMILY('8', '5'): + platform_family = FAMILY_8500; + break; + case BOOTLDRFAMILY('R', '2'): + platform_family = FAMILY_8500RNG; + break; + case BOOTLDRFAMILY('8', '6'): + platform_family = FAMILY_8600; + break; + case BOOTLDRFAMILY('B', '1'): + platform_family = FAMILY_8600VZB; + break; + case BOOTLDRFAMILY('E', '1'): + platform_family = FAMILY_1500VZE; + break; + case BOOTLDRFAMILY('F', '1'): + platform_family = FAMILY_1500VZF; + break; + default: + platform_family = -1; + } +} + +unsigned int platform_get_family(void) +{ + return platform_family; +} +EXPORT_SYMBOL(platform_get_family); + +/* + * \brief usb_eye_configure() for optimizing the USB eye on Calliope. + * + * \param unsigned int value saved to the register. + * + * \return none + * + */ +static void __init usb_eye_configure(unsigned int value) +{ + asic_write(asic_read(crt_spare) | value, crt_spare); +} + +/* + * platform_get_asic - determine the ASIC type. + * + * \param none + * + * \return ASIC type; ASIC_UNKNOWN if none + * + */ +enum asic_type platform_get_asic(void) +{ + return asic; +} +EXPORT_SYMBOL(platform_get_asic); + +/* + * platform_configure_usb - usb configuration based on platform type. + * @bcm1_usb2_ctl: value for the BCM1_USB2_CTL register, which is + * quirky + */ +static void __init platform_configure_usb(void) +{ + u32 bcm1_usb2_ctl; + + if (usb_configured) + return; + + switch (asic) { + case ASIC_ZEUS: + fs_update(0x0000, 0x11, 0x02, 0); + bcm1_usb2_ctl = 0x803; + break; + + case ASIC_CRONUS: + case ASIC_CRONUSLITE: + fs_update(0x0000, 0x11, 0x02, 0); + bcm1_usb2_ctl = 0x803; + break; + + case ASIC_CALLIOPE: + fs_update(0x0000, 0x11, 0x02, 1); + + switch (platform_family) { + case FAMILY_1500VZE: + break; + + case FAMILY_1500VZF: + usb_eye_configure(0x003c0000); + break; + + default: + usb_eye_configure(0x00300000); + break; + } + + bcm1_usb2_ctl = 0x803; + break; + + default: + pr_err("Unknown ASIC type: %d\n", asic); + break; + } + + /* turn on USB power */ + asic_write(0, usb2_strap); + /* Enable all OHCI interrupts */ + asic_write(bcm1_usb2_ctl, usb2_control); + /* USB2_STBUS_OBC store32/load32 */ + asic_write(3, usb2_stbus_obc); + /* USB2_STBUS_MESS_SIZE 2 packets */ + asic_write(1, usb2_stbus_mess_size); + /* USB2_STBUS_CHUNK_SIZE 2 packets */ + asic_write(1, usb2_stbus_chunk_size); + + usb_configured = true; +} + +/* + * Set up the USB EHCI interface + */ +void platform_configure_usb_ehci() +{ + platform_configure_usb(); +} + +/* + * Set up the USB OHCI interface + */ +void platform_configure_usb_ohci() +{ + platform_configure_usb(); +} + +/* + * Shut the USB EHCI interface down--currently a NOP + */ +void platform_unconfigure_usb_ehci() +{ +} + +/* + * Shut the USB OHCI interface down--currently a NOP + */ +void platform_unconfigure_usb_ohci() +{ +} + +/** + * configure_platform - configuration based on platform type. + */ +void __init configure_platform(void) +{ + platform_set_family(); + + switch (platform_family) { + case FAMILY_1500: + case FAMILY_1500VZE: + case FAMILY_1500VZF: + platform_features = FFS_CAPABLE; + asic = ASIC_CALLIOPE; + asic_phy_base = CALLIOPE_IO_BASE; + register_map = &calliope_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + + if (platform_family == FAMILY_1500VZE) { + gp_resources = non_dvr_vze_calliope_resources; + pr_info("Platform: 1500/Vz Class E - " + "CALLIOPE, NON_DVR_CAPABLE\n"); + } else if (platform_family == FAMILY_1500VZF) { + gp_resources = non_dvr_vzf_calliope_resources; + pr_info("Platform: 1500/Vz Class F - " + "CALLIOPE, NON_DVR_CAPABLE\n"); + } else { + gp_resources = non_dvr_calliope_resources; + pr_info("Platform: 1500/RNG100 - CALLIOPE, " + "NON_DVR_CAPABLE\n"); + } + break; + + case FAMILY_4500: + platform_features = FFS_CAPABLE | PCIE_CAPABLE | + DISPLAY_CAPABLE; + asic = ASIC_ZEUS; + asic_phy_base = ZEUS_IO_BASE; + register_map = &zeus_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = non_dvr_zeus_resources; + + pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n"); + break; + + case FAMILY_4600: + { + unsigned int chipversion = 0; + + /* The settop has PCIE but it isn't used, so don't advertise + * it*/ + platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; + asic_phy_base = CRONUS_IO_BASE; /* same as Cronus */ + register_map = &cronus_register_map; /* same as Cronus */ + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = non_dvr_cronuslite_resources; + + /* ASIC version will determine if this is a real CronusLite or + * Castrati(Cronus) */ + chipversion = asic_read(chipver3) << 24; + chipversion |= asic_read(chipver2) << 16; + chipversion |= asic_read(chipver1) << 8; + chipversion |= asic_read(chipver0); + + if ((chipversion == CRONUS_10) || (chipversion == CRONUS_11)) + asic = ASIC_CRONUS; + else + asic = ASIC_CRONUSLITE; + + pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, " + "chipversion=0x%08X\n", + (asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE", + chipversion); + break; + } + case FAMILY_4600VZA: + platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; + asic = ASIC_CRONUS; + asic_phy_base = CRONUS_IO_BASE; + register_map = &cronus_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = non_dvr_cronus_resources; + + pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n"); + break; + + case FAMILY_8500: + case FAMILY_8500RNG: + platform_features = DVR_CAPABLE | PCIE_CAPABLE | + DISPLAY_CAPABLE; + asic = ASIC_ZEUS; + asic_phy_base = ZEUS_IO_BASE; + register_map = &zeus_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = dvr_zeus_resources; + + pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n"); + break; + + case FAMILY_8600: + case FAMILY_8600VZB: + platform_features = DVR_CAPABLE | PCIE_CAPABLE | + DISPLAY_CAPABLE; + asic = ASIC_CRONUS; + asic_phy_base = CRONUS_IO_BASE; + register_map = &cronus_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = dvr_cronus_resources; + + pr_info("Platform: 8600/Vz Class B - CRONUS, " + "DVR_CAPABLE\n"); + break; + + default: + pr_crit("Platform: UNKNOWN PLATFORM\n"); + break; + } + + switch (asic) { + case ASIC_ZEUS: + phys_to_bus_offset = 0x30000000; + break; + case ASIC_CALLIOPE: + phys_to_bus_offset = 0x10000000; + break; + case ASIC_CRONUSLITE: + /* Fall through */ + case ASIC_CRONUS: + /* + * TODO: We suppose 0x10000000 aliases into 0x20000000- + * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000- + * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000. + */ + phys_to_bus_offset = 0x10000000; + break; + default: + phys_to_bus_offset = 0x00000000; + break; + } +} + +/** + * platform_devices_init - sets up USB device resourse. + */ +static int __init platform_devices_init(void) +{ + pr_notice("%s: ----- Initializing USB resources -----\n", __func__); + + asic_resource.start = asic_phy_base; + asic_resource.end += asic_resource.start; + + ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase); + ehci_resources[0].end += ehci_resources[0].start; + + ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision); + ohci_resources[0].end += ohci_resources[0].start; + + set_io_port_base(0); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + return 0; +} + +arch_initcall(platform_devices_init); + +/* + * + * BOOTMEM ALLOCATION + * + */ +/* + * Allocates/reserves the Platform memory resources early in the boot process. + * This ignores any resources that are designated IORESOURCE_IO + */ +void __init platform_alloc_bootmem(void) +{ + int i; + int total = 0; + + /* Get persistent memory data from command line before allocating + * resources. This need to happen before normal command line parsing + * has been done */ + pmem_setup_resource(); + + /* Loop through looking for resources that want a particular address */ + for (i = 0; gp_resources[i].flags != 0; i++) { + int size = gp_resources[i].end - gp_resources[i].start + 1; + if ((gp_resources[i].start != 0) && + ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) { + reserve_bootmem(bus_to_phys(gp_resources[i].start), + size, 0); + total += gp_resources[i].end - + gp_resources[i].start + 1; + pr_info("reserve resource %s at %08x (%u bytes)\n", + gp_resources[i].name, gp_resources[i].start, + gp_resources[i].end - + gp_resources[i].start + 1); + } + } + + /* Loop through assigning addresses for those that are left */ + for (i = 0; gp_resources[i].flags != 0; i++) { + int size = gp_resources[i].end - gp_resources[i].start + 1; + if ((gp_resources[i].start == 0) && + ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) { + void *mem = alloc_bootmem_pages(size); + + if (mem == NULL) + pr_err("Unable to allocate bootmem pages " + "for %s\n", gp_resources[i].name); + + else { + gp_resources[i].start = + phys_to_bus(virt_to_phys(mem)); + gp_resources[i].end = + gp_resources[i].start + size - 1; + total += size; + pr_info("allocate resource %s at %08x " + "(%u bytes)\n", + gp_resources[i].name, + gp_resources[i].start, size); + } + } + } + + pr_info("Total Platform driver memory allocation: 0x%08x\n", total); + + /* indicate resources that are platform I/O related */ + for (i = 0; gp_resources[i].flags != 0; i++) { + if ((gp_resources[i].start != 0) && + ((gp_resources[i].flags & IORESOURCE_IO) != 0)) { + pr_info("reserved platform resource %s at %08x\n", + gp_resources[i].name, gp_resources[i].start); + } + } +} + +/* + * + * PERSISTENT MEMORY (PMEM) CONFIGURATION + * + */ +static unsigned long pmemaddr __initdata; + +static int __init early_param_pmemaddr(char *p) +{ + pmemaddr = (unsigned long)simple_strtoul(p, NULL, 0); + return 0; +} +early_param("pmemaddr", early_param_pmemaddr); + +static long pmemlen __initdata; + +static int __init early_param_pmemlen(char *p) +{ +/* TODO: we can use this code when and if the bootloader ever changes this */ +#if 0 + pmemlen = (unsigned long)simple_strtoul(p, NULL, 0); +#else + pmemlen = 0x20000; +#endif + return 0; +} +early_param("pmemlen", early_param_pmemlen); + +/* + * Set up persistent memory. If we were given values, we patch the array of + * resources. Otherwise, persistent memory may be allocated anywhere at all. + */ +static void __init pmem_setup_resource(void) +{ + struct resource *resource; + resource = asic_resource_get("DiagPersistentMemory"); + + if (resource && pmemaddr && pmemlen) { + /* The address provided by bootloader is in kseg0. Convert to + * a bus address. */ + resource->start = phys_to_bus(pmemaddr - 0x80000000); + resource->end = resource->start + pmemlen - 1; + + pr_info("persistent memory: start=0x%x end=0x%x\n", + resource->start, resource->end); + } +} + +/* + * + * RESOURCE ACCESS FUNCTIONS + * + */ + +/** + * asic_resource_get - retrieves parameters for a platform resource. + * @name: string to match resource + * + * Returns a pointer to a struct resource corresponding to the given name. + * + * CANNOT BE NAMED platform_resource_get, which would be the obvious choice, + * as this function name is already declared + */ +struct resource *asic_resource_get(const char *name) +{ + int i; + + for (i = 0; gp_resources[i].flags != 0; i++) { + if (strcmp(gp_resources[i].name, name) == 0) + return &gp_resources[i]; + } + + return NULL; +} +EXPORT_SYMBOL(asic_resource_get); + +/** + * platform_release_memory - release pre-allocated memory + * @ptr: pointer to memory to release + * @size: size of resource + * + * This must only be called for memory allocated or reserved via the boot + * memory allocator. + */ +void platform_release_memory(void *ptr, int size) +{ + unsigned long addr; + unsigned long end; + + addr = ((unsigned long)ptr + (PAGE_SIZE - 1)) & PAGE_MASK; + end = ((unsigned long)ptr + size) & PAGE_MASK; + + for (; addr < end; addr += PAGE_SIZE) { + ClearPageReserved(virt_to_page(__va(addr))); + init_page_count(virt_to_page(__va(addr))); + free_page((unsigned long)__va(addr)); + } +} +EXPORT_SYMBOL(platform_release_memory); + +/* + * + * FEATURE AVAILABILITY FUNCTIONS + * + */ +int platform_supports_dvr(void) +{ + return (platform_features & DVR_CAPABLE) != 0; +} + +int platform_supports_ffs(void) +{ + return (platform_features & FFS_CAPABLE) != 0; +} + +int platform_supports_pcie(void) +{ + return (platform_features & PCIE_CAPABLE) != 0; +} + +int platform_supports_display(void) +{ + return (platform_features & DISPLAY_CAPABLE) != 0; +} diff --git a/arch/mips/powertv/asic/asic_int.c b/arch/mips/powertv/asic/asic_int.c new file mode 100644 index 000000000000..80b2eed21ac3 --- /dev/null +++ b/arch/mips/powertv/asic/asic_int.c @@ -0,0 +1,125 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. + * Copyright (C) 2001 Ralf Baechle + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Routines for generic manipulation of the interrupts found on the PowerTV + * platform. + * + * The interrupt controller is located in the South Bridge a PIIX4 device + * with two internal 82C95 interrupt controllers. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +static DEFINE_SPINLOCK(asic_irq_lock); + +static inline int get_int(void) +{ + unsigned long flags; + int irq; + + spin_lock_irqsave(&asic_irq_lock, flags); + + irq = (asic_read(int_int_scan) >> 4) - 1; + + if (irq == 0 || irq >= NR_IRQS) + irq = -1; + + spin_unlock_irqrestore(&asic_irq_lock, flags); + + return irq; +} + +static void asic_irqdispatch(void) +{ + int irq; + + irq = get_int(); + if (irq < 0) + return; /* interrupt has already been cleared */ + + do_IRQ(irq); +} + +static inline int clz(unsigned long x) +{ + __asm__( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ + return fls(pending) - 1 + CAUSEB_IP; +} + +/* + * TODO: check how it works under EIC mode. + */ +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + + if (irq == CAUSEF_IP3) + asic_irqdispatch(); + else if (irq >= 0) + do_IRQ(irq); + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + int i; + + asic_irq_init(); + + /* + * Initialize interrupt exception vectors. + */ + if (cpu_has_veic || cpu_has_vint) { + int nvec = cpu_has_veic ? 64 : 8; + for (i = 0; i < nvec; i++) + set_vi_handler(i, asic_irqdispatch); + } +} diff --git a/arch/mips/powertv/asic/irq_asic.c b/arch/mips/powertv/asic/irq_asic.c new file mode 100644 index 000000000000..b54d24499b06 --- /dev/null +++ b/arch/mips/powertv/asic/irq_asic.c @@ -0,0 +1,116 @@ +/* + * Portions copyright (C) 2005-2009 Scientific Atlanta + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * Modified from arch/mips/kernel/irq-rm7000.c: + * Copyright (C) 2003 Ralf Baechle + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include + +#include +#include +#include + +#include + +static inline void unmask_asic_irq(unsigned int irq) +{ + unsigned long enable_bit; + + enable_bit = (1 << (irq & 0x1f)); + + switch (irq >> 5) { + case 0: + asic_write(asic_read(ien_int_0) | enable_bit, ien_int_0); + break; + case 1: + asic_write(asic_read(ien_int_1) | enable_bit, ien_int_1); + break; + case 2: + asic_write(asic_read(ien_int_2) | enable_bit, ien_int_2); + break; + case 3: + asic_write(asic_read(ien_int_3) | enable_bit, ien_int_3); + break; + default: + BUG(); + } +} + +static inline void mask_asic_irq(unsigned int irq) +{ + unsigned long disable_mask; + + disable_mask = ~(1 << (irq & 0x1f)); + + switch (irq >> 5) { + case 0: + asic_write(asic_read(ien_int_0) & disable_mask, ien_int_0); + break; + case 1: + asic_write(asic_read(ien_int_1) & disable_mask, ien_int_1); + break; + case 2: + asic_write(asic_read(ien_int_2) & disable_mask, ien_int_2); + break; + case 3: + asic_write(asic_read(ien_int_3) & disable_mask, ien_int_3); + break; + default: + BUG(); + } +} + +static struct irq_chip asic_irq_chip = { + .name = "ASIC Level", + .ack = mask_asic_irq, + .mask = mask_asic_irq, + .mask_ack = mask_asic_irq, + .unmask = unmask_asic_irq, + .eoi = unmask_asic_irq, +}; + +void __init asic_irq_init(void) +{ + int i; + + /* set priority to 0 */ + write_c0_status(read_c0_status() & ~(0x0000fc00)); + + asic_write(0, ien_int_0); + asic_write(0, ien_int_1); + asic_write(0, ien_int_2); + asic_write(0, ien_int_3); + + asic_write(0x0fffffff, int_level_3_3); + asic_write(0xffffffff, int_level_3_2); + asic_write(0xffffffff, int_level_3_1); + asic_write(0xffffffff, int_level_3_0); + asic_write(0xffffffff, int_level_2_3); + asic_write(0xffffffff, int_level_2_2); + asic_write(0xffffffff, int_level_2_1); + asic_write(0xffffffff, int_level_2_0); + asic_write(0xffffffff, int_level_1_3); + asic_write(0xffffffff, int_level_1_2); + asic_write(0xffffffff, int_level_1_1); + asic_write(0xffffffff, int_level_1_0); + asic_write(0xffffffff, int_level_0_3); + asic_write(0xffffffff, int_level_0_2); + asic_write(0xffffffff, int_level_0_1); + asic_write(0xffffffff, int_level_0_0); + + asic_write(0xf, int_int_scan); + + /* + * Initialize interrupt handlers. + */ + for (i = 0; i < NR_IRQS; i++) + set_irq_chip_and_handler(i, &asic_irq_chip, handle_level_irq); +} diff --git a/arch/mips/powertv/asic/prealloc-calliope.c b/arch/mips/powertv/asic/prealloc-calliope.c new file mode 100644 index 000000000000..cd5b76a1c951 --- /dev/null +++ b/arch/mips/powertv/asic/prealloc-calliope.c @@ -0,0 +1,620 @@ +/* + * Memory pre-allocations for Calliope boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + */ + +#include +#include + +/* + * NON_DVR_CAPABLE CALLIOPE RESOURCES + */ +struct resource non_dvr_calliope_resources[] __initdata = +{ + /* + * VIDEO / LX1 + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x24200000 - 1, /*2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /*8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24202000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x26700000 - 1, /*~36.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x00000000, + .end = 0x00600000 - 1, /* 6 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * DOCSIS Subsystem + */ + { + .name = "Docsis", + .start = 0x22000000, + .end = 0x22700000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x22700000, + .end = 0x23500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x23700000, + .end = 0x23720000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer (don't need recording buffers) + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x00000000, + .end = 0x002c4c00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE + 0x400 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Synopsys GMAC Memory Region + */ + { + .name = "GMAC", + .start = 0x00000000, + .end = 0x00010000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + * + */ + { }, +}; + +struct resource non_dvr_vz_calliope_resources[] __initdata = +{ + /* + * VIDEO / LX1 + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x24200000 - 1, /*2 Meg */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8k block ST231a monitor */ + .start = 0x24200000, + .end = 0x24202000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x22202000, + .end = 0x22C20B85 - 1, /* 10.12 Meg */ + .flags = IORESOURCE_MEM, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x20300000, + .end = 0x20620000-1, /*3.125 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x20100000, + .end = 0x20300000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x23900000, + .end = 0x23920000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE+0x400 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Synopsys GMAC Memory Region + */ + { + .name = "GMAC", + .start = 0x00000000, + .end = 0x00010000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + */ + { }, +}; + +struct resource non_dvr_vze_calliope_resources[] __initdata = +{ + /* + * VIDEO / LX1 + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x22000000, + .end = 0x22200000 - 1, /*2 Meg */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8k block ST231a monitor */ + .start = 0x22200000, + .end = 0x22202000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x22202000, + .end = 0x22C20B85 - 1, /* 10.12 Meg */ + .flags = IORESOURCE_MEM, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x20396000, + .end = 0x206B6000 - 1, /* 3.125 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x20100000, + .end = 0x20396000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x206B6000, + .end = 0x206D6000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE+0x400 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Synopsys GMAC Memory Region + */ + { + .name = "GMAC", + .start = 0x00000000, + .end = 0x00010000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + */ + { }, +}; + +struct resource non_dvr_vzf_calliope_resources[] __initdata = +{ + /* + * VIDEO / LX1 + */ + { + .name = "ST231aImage", /*Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x24200000 - 1, /*2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /*8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24202000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + /* ~19.4 (21.5MiB - (2MiB + 8KiB)) */ + .end = 0x25580000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x00000000, + .end = 0x00480000 - 1, /* 4.5 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x22700000, + .end = 0x23500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x23700000, + .end = 0x23720000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer (don't need recording buffers) + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit1 + */ + { + .name = "DisplayBins1", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x00000000, + .end = 0x002c4c00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE + 0x400 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Synopsys GMAC Memory Region + */ + { + .name = "GMAC", + .start = 0x00000000, + .end = 0x00010000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + */ + { }, +}; diff --git a/arch/mips/powertv/asic/prealloc-cronus.c b/arch/mips/powertv/asic/prealloc-cronus.c new file mode 100644 index 000000000000..45a5c3ea718c --- /dev/null +++ b/arch/mips/powertv/asic/prealloc-cronus.c @@ -0,0 +1,608 @@ +/* + * Memory pre-allocations for Cronus boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + */ + +#include +#include + +/* + * DVR_CAPABLE CRONUS RESOURCES + */ +struct resource dvr_cronus_resources[] __initdata = +{ + /* + * + * VIDEO1 / LX1 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x241FFFFF, /* 2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24201FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, + }, + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory2", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x64180000 - 1, /* 12 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x00280000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x64AD4000, + .end = 0x64AD5000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * ITFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "ITFS", + .start = 0x64180000, + /* 815,104 bytes each for 2 ITFS partitions. */ + .end = 0x6430DFFF, + .flags = IORESOURCE_IO, + }, + /* + * + * AVFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "AvfsDmaMem", + .start = 0x6430E000, + /* (945K * 8) = (128K *3) 5 playbacks / 3 server */ + .end = 0x64AD0000 - 1, + .flags = IORESOURCE_IO, + }, + { + .name = "AvfsFileSys", + .start = 0x64AD0000, + .end = 0x64AD1000 - 1, /* 4K */ + .flags = IORESOURCE_IO, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x64AD1000, + .end = 0x64AD3800 - 1, + .flags = IORESOURCE_IO, + }, + /* + * + * KAVNET + * NP Reset Vector - must be of the form xxCxxxxx + * NP Image - must be video bank 1 + * NP IPC - must be video bank 2 + */ + { + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Add other resources here + */ + { }, +}; + +/* + * NON_DVR_CAPABLE CRONUS RESOURCES + */ +struct resource non_dvr_cronus_resources[] __initdata = +{ + /* + * + * VIDEO1 / LX1 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x241FFFFF, /* 2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24201FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, + }, + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory2", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x64180000 - 1, /* 12 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x64AD4000, + .end = 0x64AD5000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x6430E000, + .end = 0x645D2C00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_IO, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x64AD1000, + .end = 0x64AD3800 - 1, + .flags = IORESOURCE_IO, + }, + /* + * + * KAVNET + * NP Reset Vector - must be of the form xxCxxxxx + * NP Image - must be video bank 1 + * NP IPC - must be video bank 2 + */ + { + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, + }, + { }, +}; diff --git a/arch/mips/powertv/asic/prealloc-cronuslite.c b/arch/mips/powertv/asic/prealloc-cronuslite.c new file mode 100644 index 000000000000..23a905613c04 --- /dev/null +++ b/arch/mips/powertv/asic/prealloc-cronuslite.c @@ -0,0 +1,290 @@ +/* + * Memory pre-allocations for Cronus Lite boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + */ + +#include +#include + +/* + * NON_DVR_CAPABLE CRONUSLITE RESOURCES + */ +struct resource non_dvr_cronuslite_resources[] __initdata = +{ + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory1", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x63B80000 - 1, /* 6 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x63B83000, + .end = 0x63B84000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x63B84000, + .end = 0x63E48C00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_IO, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x63B80000, + .end = 0x63B82800 - 1, + .flags = IORESOURCE_IO, + }, + /* + * + * KAVNET + * NP Reset Vector - must be of the form xxCxxxxx + * NP Image - must be video bank 1 + * NP IPC - must be video bank 2 + */ + { + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE + 0x400 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Add other resources here + */ + { }, +}; diff --git a/arch/mips/powertv/asic/prealloc-zeus.c b/arch/mips/powertv/asic/prealloc-zeus.c new file mode 100644 index 000000000000..018d4514dbe3 --- /dev/null +++ b/arch/mips/powertv/asic/prealloc-zeus.c @@ -0,0 +1,459 @@ +/* + * Memory pre-allocations for Zeus boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + */ + +#include +#include + +/* + * DVR_CAPABLE RESOURCES + */ +struct resource dvr_zeus_resources[] __initdata = +{ + /* + * + * VIDEO1 / LX1 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x20000000, + .end = 0x201FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x20200000, + .end = 0x20201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory1", + .start = 0x20202000, + .end = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x30000000, + .end = 0x301FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x30200000, + .end = 0x30201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory2", + .start = 0x30202000, + .end = 0x31FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x00000000, + .end = 0x00c00000 - 1, /* 12 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x40100000, + .end = 0x407fffff, + .flags = IORESOURCE_MEM, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x46900000, + .end = 0x47700000 - 1, /* 14 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x47900000, + .end = 0x47920000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x00280000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * ITFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "ITFS", + .start = 0x00000000, + /* 815,104 bytes each for 2 ITFS partitions. */ + .end = 0x0018DFFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * AVFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "AvfsDmaMem", + .start = 0x00000000, + /* (945K * 8) = (128K * 3) 5 playbacks / 3 server */ + .end = 0x007c2000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "AvfsFileSys", + .start = 0x00000000, + .end = 0x00001000 - 1, /* 4K */ + .flags = IORESOURCE_MEM, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + */ + { }, +}; + +/* + * NON_DVR_CAPABLE ZEUS RESOURCES + */ +struct resource non_dvr_zeus_resources[] __initdata = +{ + /* + * VIDEO1 / LX1 + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x20000000, + .end = 0x201FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x20200000, + .end = 0x20201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory1", + .start = 0x20202000, + .end = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x00000000, + .end = 0x00600000 - 1, /* 6 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * DOCSIS Subsystem + */ + { + .name = "Docsis", + .start = 0x40100000, + .end = 0x407fffff, + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x46900000, + .end = 0x47700000 - 1, /* 14 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x47900000, + .end = 0x47920000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x00280000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x00000000, + .end = 0x002c4c00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE + 0x400 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Add other resources here + */ + { }, +}; diff --git a/arch/mips/powertv/cmdline.c b/arch/mips/powertv/cmdline.c new file mode 100644 index 000000000000..98d73cb0d452 --- /dev/null +++ b/arch/mips/powertv/cmdline.c @@ -0,0 +1,52 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Kernel command line creation using the prom monitor (YAMON) argc/argv. + */ +#include +#include + +#include + +#include "init.h" + +/* + * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. + * This macro take care of sign extension. + */ +#define prom_argv(index) ((char *)(long)_prom_argv[(index)]) + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +void __init prom_init_cmdline(void) +{ + int len; + + if (prom_argc != 1) + return; + + len = strlen(arcs_cmdline); + + arcs_cmdline[len] = ' '; + + strlcpy(arcs_cmdline + len + 1, (char *)_prom_argv, + COMMAND_LINE_SIZE - len - 1); +} diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c new file mode 100644 index 000000000000..5f4e4c304e48 --- /dev/null +++ b/arch/mips/powertv/init.c @@ -0,0 +1,128 @@ +/* + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * PROM library initialisation code. + */ +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "init.h" + +int prom_argc; +int *_prom_argv, *_prom_envp; +unsigned long _prom_memsize; + +/* + * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. + * This macro take care of sign extension, if running in 64-bit mode. + */ +#define prom_envp(index) ((char *)(long)_prom_envp[(index)]) + +char *prom_getenv(char *envname) +{ + char *result = NULL; + + if (_prom_envp != NULL) { + /* + * Return a pointer to the given environment variable. + * In 64-bit mode: we're using 64-bit pointers, but all pointers + * in the PROM structures are only 32-bit, so we need some + * workarounds, if we are running in 64-bit mode. + */ + int i, index = 0; + + i = strlen(envname); + + while (prom_envp(index)) { + if (strncmp(envname, prom_envp(index), i) == 0) { + result = prom_envp(index + 1); + break; + } + index += 2; + } + } + + return result; +} + +/* TODO: Verify on linux-mips mailing list that the following two */ +/* functions are correct */ +/* TODO: Copy NMI and EJTAG exception vectors to memory from the */ +/* BootROM exception vectors. Flush their cache entries. test it. */ + +static void __init mips_nmi_setup(void) +{ + void *base; +#if defined(CONFIG_CPU_MIPS32_R1) + base = cpu_has_veic ? + (void *)(CAC_BASE + 0xa80) : + (void *)(CAC_BASE + 0x380); +#elif defined(CONFIG_CPU_MIPS32_R2) + base = (void *)0xbfc00000; +#else +#error NMI exception handler address not defined +#endif +} + +static void __init mips_ejtag_setup(void) +{ + void *base; + +#if defined(CONFIG_CPU_MIPS32_R1) + base = cpu_has_veic ? + (void *)(CAC_BASE + 0xa00) : + (void *)(CAC_BASE + 0x300); +#elif defined(CONFIG_CPU_MIPS32_R2) + base = (void *)0xbfc00480; +#else +#error EJTAG exception handler address not defined +#endif +} + +void __init prom_init(void) +{ + prom_argc = fw_arg0; + _prom_argv = (int *) fw_arg1; + _prom_envp = (int *) fw_arg2; + _prom_memsize = (unsigned long) fw_arg3; + + board_nmi_handler_setup = mips_nmi_setup; + board_ejtag_handler_setup = mips_ejtag_setup; + + pr_info("\nLINUX started...\n"); + prom_init_cmdline(); + configure_platform(); + prom_meminit(); + +#ifndef CONFIG_BOOTLOADER_DRIVER + pr_info("\nBootloader driver isn't loaded...\n"); +#endif +} diff --git a/arch/mips/powertv/init.h b/arch/mips/powertv/init.h new file mode 100644 index 000000000000..7af6bf25008c --- /dev/null +++ b/arch/mips/powertv/init.h @@ -0,0 +1,28 @@ +/* + * Definitions from powertv init.c file + * + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: David VomLehn + */ + +#ifndef _POWERTV_INIT_H +#define _POWERTV_INIT_H +extern int prom_argc; +extern int *_prom_argv; +extern unsigned long _prom_memsize; +#endif diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c new file mode 100644 index 000000000000..28d06605fff6 --- /dev/null +++ b/arch/mips/powertv/memory.c @@ -0,0 +1,186 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Apparently originally from arch/mips/malta-memory.c. Modified to work + * with the PowerTV bootloader. + */ +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include "init.h" + +/* Memory constants */ +#define KIBIBYTE(n) ((n) * 1024) /* Number of kibibytes */ +#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */ +#define DEFAULT_MEMSIZE MEBIBYTE(256) /* If no memsize provided */ +#define LOW_MEM_MAX MEBIBYTE(252) /* Max usable low mem */ +#define RES_BOOTLDR_MEMSIZE MEBIBYTE(1) /* Memory reserved for bldr */ +#define BOOT_MEM_SIZE KIBIBYTE(256) /* Memory reserved for bldr */ +#define PHYS_MEM_START 0x10000000 /* Start of physical memory */ + +unsigned long ptv_memsize; + +char __initdata cmdline[COMMAND_LINE_SIZE]; + +void __init prom_meminit(void) +{ + char *memsize_str; + unsigned long memsize = 0; + unsigned int physend; + char *ptr; + int low_mem; + int high_mem; + + /* Check the command line first for a memsize directive */ + strcpy(cmdline, arcs_cmdline); + ptr = strstr(cmdline, "memsize="); + if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) + ptr = strstr(ptr, " memsize="); + + if (ptr) { + memsize = memparse(ptr + 8, &ptr); + } else { + /* otherwise look in the environment */ + memsize_str = prom_getenv("memsize"); + + if (memsize_str != NULL) { + pr_info("prom memsize = %s\n", memsize_str); + memsize = simple_strtol(memsize_str, NULL, 0); + } + + if (memsize == 0) { + if (_prom_memsize != 0) { + memsize = _prom_memsize; + pr_info("_prom_memsize = 0x%lx\n", memsize); + /* add in memory that the bootloader doesn't + * report */ + memsize += BOOT_MEM_SIZE; + } else { + memsize = DEFAULT_MEMSIZE; + pr_info("Memsize not passed by bootloader, " + "defaulting to 0x%lx\n", memsize); + } + } + } + + /* Store memsize for diagnostic purposes */ + ptv_memsize = memsize; + + physend = PFN_ALIGN(&_end) - 0x80000000; + if (memsize > LOW_MEM_MAX) { + low_mem = LOW_MEM_MAX; + high_mem = memsize - low_mem; + } else { + low_mem = memsize; + high_mem = 0; + } + +/* + * TODO: We will use the hard code for memory configuration until + * the bootloader releases their device tree to us. + */ + /* + * Add the memory reserved for use by the bootloader to the + * memory map. + */ + add_memory_region(PHYS_MEM_START, RES_BOOTLDR_MEMSIZE, + BOOT_MEM_RESERVED); +#ifdef CONFIG_HIGHMEM_256_128 + /* + * Add memory in low for general use by the kernel and its friends + * (like drivers, applications, etc). + */ + add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE, + LOW_MEM_MAX - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM); + /* + * Add the memory reserved for reset vector. + */ + add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED); + /* + * Add the memory reserved. + */ + add_memory_region(0x20000000, MEBIBYTE(1024 + 75), BOOT_MEM_RESERVED); + /* + * Add memory in high for general use by the kernel and its friends + * (like drivers, applications, etc). + * + * 75MB is reserved for devices which are using the memory in high. + */ + add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75), + BOOT_MEM_RAM); +#elif defined CONFIG_HIGHMEM_128_128 + /* + * Add memory in low for general use by the kernel and its friends + * (like drivers, applications, etc). + */ + add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE, + MEBIBYTE(128) - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM); + /* + * Add the memory reserved. + */ + add_memory_region(PHYS_MEM_START + MEBIBYTE(128), + MEBIBYTE(128 + 1024 + 75), BOOT_MEM_RESERVED); + /* + * Add memory in high for general use by the kernel and its friends + * (like drivers, applications, etc). + * + * 75MB is reserved for devices which are using the memory in high. + */ + add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75), + BOOT_MEM_RAM); +#else + /* Add low memory regions for either: + * - no-highmemory configuration case -OR- + * - highmemory "HIGHMEM_LOWBANK_ONLY" case + */ + /* + * Add memory for general use by the kernel and its friends + * (like drivers, applications, etc). + */ + add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE, + low_mem - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM); + /* + * Add the memory reserved for reset vector. + */ + add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED); +#endif +} + +void __init prom_free_prom_memory(void) +{ + unsigned long addr; + int i; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) + continue; + + addr = boot_mem_map.map[i].addr; + free_init_pages("prom memory", + addr, addr + boot_mem_map.map[i].size); + } +} diff --git a/arch/mips/powertv/pci/Makefile b/arch/mips/powertv/pci/Makefile new file mode 100644 index 000000000000..f5c62462fc9d --- /dev/null +++ b/arch/mips/powertv/pci/Makefile @@ -0,0 +1,21 @@ +# +# Copyright (C) 2009 Scientific-Atlanta, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +obj-$(CONFIG_PCI) += fixup-powertv.o + +EXTRA_CFLAGS += -Wall -Werror diff --git a/arch/mips/powertv/pci/fixup-powertv.c b/arch/mips/powertv/pci/fixup-powertv.c new file mode 100644 index 000000000000..726bc2e824b3 --- /dev/null +++ b/arch/mips/powertv/pci/fixup-powertv.c @@ -0,0 +1,36 @@ +#include +#include +#include +#include "powertv-pci.h" + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return asic_pcie_map_irq(dev, slot, pin); +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +/* + * asic_pcie_map_irq + * + * Parameters: + * *dev - pointer to a pci_dev structure (not used) + * slot - slot number (not used) + * pin - pin number (not used) + * + * Return Value: + * Returns: IRQ number (always the PCI Express IRQ number) + * + * Description: + * asic_pcie_map_irq will return the IRQ number of the PCI Express interrupt. + * + */ +int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return irq_pciexp; +} +EXPORT_SYMBOL(asic_pcie_map_irq); diff --git a/arch/mips/powertv/pci/powertv-pci.h b/arch/mips/powertv/pci/powertv-pci.h new file mode 100644 index 000000000000..1b5886bbd759 --- /dev/null +++ b/arch/mips/powertv/pci/powertv-pci.h @@ -0,0 +1,31 @@ +/* + * powertv-pci.c + * + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +/* + * Local definitions for the powertv PCI code + */ + +#ifndef _POWERTV_PCI_POWERTV_PCI_H_ +#define _POWERTV_PCI_POWERTV_PCI_H_ +extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +extern int asic_pcie_init(void); +extern int asic_pcie_init(void); + +extern int log_level; +#endif diff --git a/arch/mips/powertv/powertv-clock.h b/arch/mips/powertv/powertv-clock.h new file mode 100644 index 000000000000..d94c54311485 --- /dev/null +++ b/arch/mips/powertv/powertv-clock.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: David VomLehn + */ + +#ifndef _POWERTV_POWERTV_CLOCK_H +#define _POWERTV_POWERTV_CLOCK_H +extern int powertv_clockevent_init(void); +extern void powertv_clocksource_init(void); +extern unsigned int mips_get_pll_freq(void); +#endif diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c new file mode 100644 index 000000000000..bd8ebf128f29 --- /dev/null +++ b/arch/mips/powertv/powertv_setup.c @@ -0,0 +1,351 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "reset.h" + +#define VAL(n) STR(n) + +/* + * Macros for loading addresses and storing registers: + * PTR_LA Load the address into a register + * LONG_S Store the full width of the given register. + * LONG_L Load the full width of the given register + * PTR_ADDIU Add a constant value to a register used as a pointer + * REG_SIZE Number of 8-bit bytes in a full width register + */ +#ifdef CONFIG_64BIT +#warning TODO: 64-bit code needs to be verified +#define PTR_LA "dla " +#define LONG_S "sd " +#define LONG_L "ld " +#define PTR_ADDIU "daddiu " +#define REG_SIZE "8" /* In bytes */ +#endif + +#ifdef CONFIG_32BIT +#define PTR_LA "la " +#define LONG_S "sw " +#define LONG_L "lw " +#define PTR_ADDIU "addiu " +#define REG_SIZE "4" /* In bytes */ +#endif + +static struct pt_regs die_regs; +static bool have_die_regs; + +static void register_panic_notifier(void); +static int panic_handler(struct notifier_block *notifier_block, + unsigned long event, void *cause_string); + +const char *get_system_type(void) +{ + return "PowerTV"; +} + +void __init plat_mem_setup(void) +{ + panic_on_oops = 1; + register_panic_notifier(); + +#if 0 + mips_pcibios_init(); +#endif + mips_reboot_setup(); +} + +/* + * Install a panic notifier for platform-specific diagnostics + */ +static void register_panic_notifier() +{ + static struct notifier_block panic_notifier = { + .notifier_call = panic_handler, + .next = NULL, + .priority = INT_MAX + }; + atomic_notifier_chain_register(&panic_notifier_list, &panic_notifier); +} + +static int panic_handler(struct notifier_block *notifier_block, + unsigned long event, void *cause_string) +{ + struct pt_regs my_regs; + + /* Save all of the registers */ + { + unsigned long at, v0, v1; /* Must be on the stack */ + + /* Start by saving $at and v0 on the stack. We use $at + * ourselves, but it looks like the compiler may use v0 or v1 + * to load the address of the pt_regs structure. We'll come + * back later to store the registers in the pt_regs + * structure. */ + __asm__ __volatile__ ( + ".set noat\n" + LONG_S "$at, %[at]\n" + LONG_S "$2, %[v0]\n" + LONG_S "$3, %[v1]\n" + : + [at] "=m" (at), + [v0] "=m" (v0), + [v1] "=m" (v1) + : + : "at" + ); + + __asm__ __volatile__ ( + ".set noat\n" + "move $at, %[pt_regs]\n" + + /* Argument registers */ + LONG_S "$4, " VAL(PT_R4) "($at)\n" + LONG_S "$5, " VAL(PT_R5) "($at)\n" + LONG_S "$6, " VAL(PT_R6) "($at)\n" + LONG_S "$7, " VAL(PT_R7) "($at)\n" + + /* Temporary regs */ + LONG_S "$8, " VAL(PT_R8) "($at)\n" + LONG_S "$9, " VAL(PT_R9) "($at)\n" + LONG_S "$10, " VAL(PT_R10) "($at)\n" + LONG_S "$11, " VAL(PT_R11) "($at)\n" + LONG_S "$12, " VAL(PT_R12) "($at)\n" + LONG_S "$13, " VAL(PT_R13) "($at)\n" + LONG_S "$14, " VAL(PT_R14) "($at)\n" + LONG_S "$15, " VAL(PT_R15) "($at)\n" + + /* "Saved" registers */ + LONG_S "$16, " VAL(PT_R16) "($at)\n" + LONG_S "$17, " VAL(PT_R17) "($at)\n" + LONG_S "$18, " VAL(PT_R18) "($at)\n" + LONG_S "$19, " VAL(PT_R19) "($at)\n" + LONG_S "$20, " VAL(PT_R20) "($at)\n" + LONG_S "$21, " VAL(PT_R21) "($at)\n" + LONG_S "$22, " VAL(PT_R22) "($at)\n" + LONG_S "$23, " VAL(PT_R23) "($at)\n" + + /* Add'l temp regs */ + LONG_S "$24, " VAL(PT_R24) "($at)\n" + LONG_S "$25, " VAL(PT_R25) "($at)\n" + + /* Kernel temp regs */ + LONG_S "$26, " VAL(PT_R26) "($at)\n" + LONG_S "$27, " VAL(PT_R27) "($at)\n" + + /* Global pointer, stack pointer, frame pointer and + * return address */ + LONG_S "$gp, " VAL(PT_R28) "($at)\n" + LONG_S "$sp, " VAL(PT_R29) "($at)\n" + LONG_S "$fp, " VAL(PT_R30) "($at)\n" + LONG_S "$ra, " VAL(PT_R31) "($at)\n" + + /* Now we can get the $at and v0 registers back and + * store them */ + LONG_L "$8, %[at]\n" + LONG_S "$8, " VAL(PT_R1) "($at)\n" + LONG_L "$8, %[v0]\n" + LONG_S "$8, " VAL(PT_R2) "($at)\n" + LONG_L "$8, %[v1]\n" + LONG_S "$8, " VAL(PT_R3) "($at)\n" + : + : + [at] "m" (at), + [v0] "m" (v0), + [v1] "m" (v1), + [pt_regs] "r" (&my_regs) + : "at", "t0" + ); + + /* Set the current EPC value to be the current location in this + * function */ + __asm__ __volatile__ ( + ".set noat\n" + "1:\n" + PTR_LA "$at, 1b\n" + LONG_S "$at, %[cp0_epc]\n" + : + [cp0_epc] "=m" (my_regs.cp0_epc) + : + : "at" + ); + + my_regs.cp0_cause = read_c0_cause(); + my_regs.cp0_status = read_c0_status(); + } + +#ifdef CONFIG_DIAGNOSTICS + failure_report((char *) cause_string, + have_die_regs ? &die_regs : &my_regs); + have_die_regs = false; +#else + pr_crit("I'm feeling a bit sleepy. hmmmmm... perhaps a nap would... " + "zzzz... \n"); +#endif + + return NOTIFY_DONE; +} + +/** + * Platform-specific handling of oops + * @str: Pointer to the oops string + * @regs: Pointer to the oops registers + * All we do here is to save the registers for subsequent printing through + * the panic notifier. + */ +void platform_die(const char *str, const struct pt_regs *regs) +{ + /* If we already have saved registers, don't overwrite them as they + * they apply to the initial fault */ + + if (!have_die_regs) { + have_die_regs = true; + die_regs = *regs; + } +} + +/* Information about the RF MAC address, if one was supplied on the + * command line. */ +static bool have_rfmac; +static u8 rfmac[ETH_ALEN]; + +static int rfmac_param(char *p) +{ + u8 *q; + bool is_high_nibble; + int c; + + /* Skip a leading "0x", if present */ + if (*p == '0' && *(p+1) == 'x') + p += 2; + + q = rfmac; + is_high_nibble = true; + + for (c = (unsigned char) *p++; + isxdigit(c) && q - rfmac < ETH_ALEN; + c = (unsigned char) *p++) { + int nibble; + + nibble = (isdigit(c) ? (c - '0') : + (isupper(c) ? c - 'A' + 10 : c - 'a' + 10)); + + if (is_high_nibble) + *q = nibble << 4; + else + *q++ |= nibble; + + is_high_nibble = !is_high_nibble; + } + + /* If we parsed all the way to the end of the parameter value and + * parsed all ETH_ALEN bytes, we have a usable RF MAC address */ + have_rfmac = (c == '\0' && q - rfmac == ETH_ALEN); + + return 0; +} + +early_param("rfmac", rfmac_param); + +/* + * Generate an Ethernet MAC address that has a good chance of being unique. + * @addr: Pointer to six-byte array containing the Ethernet address + * Generates an Ethernet MAC address that is highly likely to be unique for + * this particular system on a network with other systems of the same type. + * + * The problem we are solving is that, when random_ether_addr() is used to + * generate MAC addresses at startup, there isn't much entropy for the random + * number generator to use and the addresses it produces are fairly likely to + * be the same as those of other identical systems on the same local network. + * This is true even for relatively small numbers of systems (for the reason + * why, see the Wikipedia entry for "Birthday problem" at: + * http://en.wikipedia.org/wiki/Birthday_problem + * + * The good news is that we already have a MAC address known to be unique, the + * RF MAC address. The bad news is that this address is already in use on the + * RF interface. Worse, the obvious trick, taking the RF MAC address and + * turning on the locally managed bit, has already been used for other devices. + * Still, this does give us something to work with. + * + * The approach we take is: + * 1. If we can't get the RF MAC Address, just call random_ether_addr. + * 2. Use the 24-bit NIC-specific bits of the RF MAC address as the last 24 + * bits of the new address. This is very likely to be unique, except for + * the current box. + * 3. To avoid using addresses already on the current box, we set the top + * six bits of the address with a value different from any currently + * registered Scientific Atlanta organizationally unique identifyer + * (OUI). This avoids duplication with any addresses on the system that + * were generated from valid Scientific Atlanta-registered address by + * simply flipping the locally managed bit. + * 4. We aren't generating a multicast address, so we leave the multicast + * bit off. Since we aren't using a registered address, we have to set + * the locally managed bit. + * 5. We then randomly generate the remaining 16-bits. This does two + * things: + * a. It allows us to call this function for more than one device + * in this system + * b. It ensures that things will probably still work even if + * some device on the device network has a locally managed + * address that matches the top six bits from step 2. + */ +void platform_random_ether_addr(u8 addr[ETH_ALEN]) +{ + const int num_random_bytes = 2; + const unsigned char non_sciatl_oui_bits = 0xc0u; + const unsigned char mac_addr_locally_managed = (1 << 1); + + if (!have_rfmac) { + pr_warning("rfmac not available on command line; " + "generating random MAC address\n"); + random_ether_addr(addr); + } + + else { + int i; + + /* Set the first byte to something that won't match a Scientific + * Atlanta OUI, is locally managed, and isn't a multicast + * address */ + addr[0] = non_sciatl_oui_bits | mac_addr_locally_managed; + + /* Get some bytes of random address information */ + get_random_bytes(&addr[1], num_random_bytes); + + /* Copy over the NIC-specific bits of the RF MAC address */ + for (i = 1 + num_random_bytes; i < ETH_ALEN; i++) + addr[i] = rfmac[i]; + } +} diff --git a/arch/mips/powertv/reset.c b/arch/mips/powertv/reset.c new file mode 100644 index 000000000000..494c652c984b --- /dev/null +++ b/arch/mips/powertv/reset.c @@ -0,0 +1,65 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include + +#include +#include /* Not included by linux/reboot.h */ + +#ifdef CONFIG_BOOTLOADER_DRIVER +#include +#endif + +#include +#include "reset.h" + +static void mips_machine_restart(char *command); +static void mips_machine_halt(void); + +static void mips_machine_restart(char *command) +{ +#ifdef CONFIG_BOOTLOADER_DRIVER + /* + * Call the bootloader's reset function to ensure + * that persistent data is flushed before hard reset + */ + kbldr_SetCauseAndReset(); +#else + writel(0x1, asic_reg_addr(watchdog)); +#endif +} + +static void mips_machine_halt(void) +{ +#ifdef CONFIG_BOOTLOADER_DRIVER + /* + * Call the bootloader's reset function to ensure + * that persistent data is flushed before hard reset + */ + kbldr_SetCauseAndReset(); +#else + writel(0x1, asic_reg_addr(watchdog)); +#endif +} + +void mips_reboot_setup(void) +{ + _machine_restart = mips_machine_restart; + _machine_halt = mips_machine_halt; + pm_power_off = mips_machine_halt; +} diff --git a/arch/mips/powertv/reset.h b/arch/mips/powertv/reset.h new file mode 100644 index 000000000000..888fd09e2620 --- /dev/null +++ b/arch/mips/powertv/reset.h @@ -0,0 +1,26 @@ +/* + * Definitions from powertv reset.c file + * + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: David VomLehn + */ + +#ifndef _POWERTV_POWERTV_RESET_H +#define _POWERTV_POWERTV_RESET_H +extern void mips_reboot_setup(void); +#endif diff --git a/arch/mips/powertv/time.c b/arch/mips/powertv/time.c new file mode 100644 index 000000000000..1e0a5ef4c8c7 --- /dev/null +++ b/arch/mips/powertv/time.c @@ -0,0 +1,37 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Setting up the clock on the MIPS boards. + */ + +#include +#include +#include + +#include "powertv-clock.h" + +unsigned int __cpuinit get_c0_compare_int(void) +{ + return irq_mips_timer; +} + +void __init plat_time_init(void) +{ + powertv_clocksource_init(); + r4k_clockevent_init(); +} -- GitLab From e13fb77661b62f49170ef30d707272c568f81681 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 17 Nov 2009 00:58:14 +0800 Subject: [PATCH 225/618] MIPS: Lemote 2F: Add NAS support Kernel support for this machine is almost the same as Fuloong 2F; the only difference is that it uses the serial port provided by Loongson 2F processor as Yeeloong 2F does. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/656/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/bootinfo.h | 3 ++- arch/mips/loongson/common/machtype.c | 1 + arch/mips/loongson/common/serial.c | 1 + arch/mips/loongson/common/uart_base.c | 1 + arch/mips/loongson/lemote-2f/reset.c | 2 ++ 5 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index 07d41157afb2..be28e3bd0cba 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -67,7 +67,8 @@ #define MACH_LEMOTE_ML2F7 3 #define MACH_LEMOTE_YL2F89 4 #define MACH_DEXXON_GDIUM2F10 5 -#define MACH_LOONGSON_END 6 +#define MACH_LEMOTE_NAS 6 +#define MACH_LOONGSON_END 7 extern char *system_type; const char *get_system_type(void); diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c index 7545fe69089f..d57e1f4503ad 100644 --- a/arch/mips/loongson/common/machtype.c +++ b/arch/mips/loongson/common/machtype.c @@ -25,6 +25,7 @@ static const char *system_types[] = { [MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches", [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches", [MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches", + [MACH_LEMOTE_NAS] "lemote-nas-2f", [MACH_LOONGSON_END] NULL, }; diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c index dc6488c14763..45601e4315d5 100644 --- a/arch/mips/loongson/common/serial.c +++ b/arch/mips/loongson/common/serial.c @@ -45,6 +45,7 @@ static struct plat_serial8250_port uart8250_data[][2] = { [MACH_LEMOTE_ML2F7] {PORT_M(3), {} }, [MACH_LEMOTE_YL2F89] {PORT_M(3), {} }, [MACH_DEXXON_GDIUM2F10] {PORT_M(3), {} }, + [MACH_LEMOTE_NAS] {PORT_M(3), {} }, [MACH_LOONGSON_END] {}, }; diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c index 233c708fc120..e34d699f6f35 100644 --- a/arch/mips/loongson/common/uart_base.c +++ b/arch/mips/loongson/common/uart_base.c @@ -23,6 +23,7 @@ unsigned long __maybe_unused uart8250_base[] = { [MACH_LEMOTE_ML2F7] (LOONGSON_LIO1_BASE + 0x3f8), [MACH_LEMOTE_YL2F89] (LOONGSON_LIO1_BASE + 0x3f8), [MACH_DEXXON_GDIUM2F10] (LOONGSON_LIO1_BASE + 0x3f8), + [MACH_LEMOTE_NAS] (LOONGSON_LIO1_BASE + 0x3f8), [MACH_LOONGSON_END] 0, }; EXPORT_SYMBOL(uart8250_base); diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c index 0458a1c56419..980299dbeac3 100644 --- a/arch/mips/loongson/lemote-2f/reset.c +++ b/arch/mips/loongson/lemote-2f/reset.c @@ -141,6 +141,7 @@ void mach_prepare_reboot(void) { switch (mips_machtype) { case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_NAS: fl2f_reboot(); break; case MACH_LEMOTE_ML2F7: @@ -158,6 +159,7 @@ void mach_prepare_shutdown(void) { switch (mips_machtype) { case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_NAS: fl2f_shutdown(); break; case MACH_LEMOTE_ML2F7: -- GitLab From 6e552c9b3aa7ba3be57b9569ec92a38af5c65e48 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 17 Nov 2009 00:58:15 +0800 Subject: [PATCH 226/618] MIPS: Lemote 2F: Add Lynloong support Add a new machtype and kernel options for the Lynloong. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/657/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/bootinfo.h | 3 ++- arch/mips/loongson/common/machtype.c | 1 + arch/mips/loongson/common/serial.c | 1 + arch/mips/loongson/common/uart_base.c | 1 + arch/mips/loongson/lemote-2f/reset.c | 2 ++ 5 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index be28e3bd0cba..09eee09780f2 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -68,7 +68,8 @@ #define MACH_LEMOTE_YL2F89 4 #define MACH_DEXXON_GDIUM2F10 5 #define MACH_LEMOTE_NAS 6 -#define MACH_LOONGSON_END 7 +#define MACH_LEMOTE_LL2F 7 +#define MACH_LOONGSON_END 8 extern char *system_type; const char *get_system_type(void); diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c index d57e1f4503ad..0ed52b3f5314 100644 --- a/arch/mips/loongson/common/machtype.c +++ b/arch/mips/loongson/common/machtype.c @@ -26,6 +26,7 @@ static const char *system_types[] = { [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches", [MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches", [MACH_LEMOTE_NAS] "lemote-nas-2f", + [MACH_LEMOTE_LL2F] "lemote-lynloong-2f", [MACH_LOONGSON_END] NULL, }; diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c index 45601e4315d5..ea29db099aee 100644 --- a/arch/mips/loongson/common/serial.c +++ b/arch/mips/loongson/common/serial.c @@ -46,6 +46,7 @@ static struct plat_serial8250_port uart8250_data[][2] = { [MACH_LEMOTE_YL2F89] {PORT_M(3), {} }, [MACH_DEXXON_GDIUM2F10] {PORT_M(3), {} }, [MACH_LEMOTE_NAS] {PORT_M(3), {} }, + [MACH_LEMOTE_LL2F] {PORT(3), {} }, [MACH_LOONGSON_END] {}, }; diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c index e34d699f6f35..1d636f4f7505 100644 --- a/arch/mips/loongson/common/uart_base.c +++ b/arch/mips/loongson/common/uart_base.c @@ -24,6 +24,7 @@ unsigned long __maybe_unused uart8250_base[] = { [MACH_LEMOTE_YL2F89] (LOONGSON_LIO1_BASE + 0x3f8), [MACH_DEXXON_GDIUM2F10] (LOONGSON_LIO1_BASE + 0x3f8), [MACH_LEMOTE_NAS] (LOONGSON_LIO1_BASE + 0x3f8), + [MACH_LEMOTE_LL2F] (LOONGSON_PCIIO_BASE + 0x2f8), [MACH_LOONGSON_END] 0, }; EXPORT_SYMBOL(uart8250_base); diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c index 980299dbeac3..44bb984d58dd 100644 --- a/arch/mips/loongson/lemote-2f/reset.c +++ b/arch/mips/loongson/lemote-2f/reset.c @@ -142,6 +142,7 @@ void mach_prepare_reboot(void) switch (mips_machtype) { case MACH_LEMOTE_FL2F: case MACH_LEMOTE_NAS: + case MACH_LEMOTE_LL2F: fl2f_reboot(); break; case MACH_LEMOTE_ML2F7: @@ -160,6 +161,7 @@ void mach_prepare_shutdown(void) switch (mips_machtype) { case MACH_LEMOTE_FL2F: case MACH_LEMOTE_NAS: + case MACH_LEMOTE_LL2F: fl2f_shutdown(); break; case MACH_LEMOTE_ML2F7: -- GitLab From 916daba8a9f2617ded8b9255e6b39f066ef60178 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 17 Nov 2009 01:32:57 +0800 Subject: [PATCH 227/618] MIPS: Lemote 2F: Add cs5536 MFGPT timer support CPUFreq support for Loongson 2F requires an external timer. Because the frequency of the MIPS Timer is related to the CPU frequency which itself is variable another timer of constant frequency is required. Export the mfgpt0 counter disable / enable operations for the coming suspend support to suspend / resume the timer. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Cc: cpufreq@vger.kernel.org, Cc: Dave Jones , Cc: Dominik Brodowski , Cc: yanh@lemote.com Cc: huhb@lemote.com, Patchwork: http://patchwork.linux-mips.org/patch/658/ Signed-off-by: Ralf Baechle --- .../asm/mach-loongson/cs5536/cs5536_mfgpt.h | 35 +++ arch/mips/loongson/Kconfig | 11 + arch/mips/loongson/common/cs5536/Makefile | 5 + .../loongson/common/cs5536/cs5536_mfgpt.c | 217 ++++++++++++++++++ arch/mips/loongson/common/time.c | 3 + 5 files changed, 271 insertions(+) create mode 100644 arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h create mode 100644 arch/mips/loongson/common/cs5536/cs5536_mfgpt.c diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h new file mode 100644 index 000000000000..4b493d6772c2 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h @@ -0,0 +1,35 @@ +/* + * cs5536 mfgpt header file + */ + +#ifndef _CS5536_MFGPT_H +#define _CS5536_MFGPT_H + +#include +#include + +#ifdef CONFIG_CS5536_MFGPT +extern void setup_mfgpt0_timer(void); +extern void disable_mfgpt0_counter(void); +extern void enable_mfgpt0_counter(void); +#else +static inline void __maybe_unused setup_mfgpt0_timer(void) +{ +} +static inline void __maybe_unused disable_mfgpt0_counter(void) +{ +} +static inline void __maybe_unused enable_mfgpt0_counter(void) +{ +} +#endif + +#define MFGPT_TICK_RATE 14318000 +#define COMPARE ((MFGPT_TICK_RATE + HZ/2) / HZ) + +#define MFGPT_BASE mfgpt_base +#define MFGPT0_CMP2 (MFGPT_BASE + 2) +#define MFGPT0_CNT (MFGPT_BASE + 4) +#define MFGPT0_SETUP (MFGPT_BASE + 6) + +#endif /*!_CS5536_MFGPT_H */ diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index 17e72fde908c..8b5cc138611a 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -62,6 +62,17 @@ endchoice config CS5536 bool +config CS5536_MFGPT + bool "CS5536 MFGPT Timer" + depends on CS5536 + help + This option enables the mfgpt0 timer of AMD CS5536. + + If you want to enable the Loongson2 CPUFreq Driver, Please enable + this option at first, otherwise, You will get wrong system time. + + If unsure, say Yes. + config LOONGSON_SUSPEND bool default y diff --git a/arch/mips/loongson/common/cs5536/Makefile b/arch/mips/loongson/common/cs5536/Makefile index 31657ee037d8..510d4cdc2378 100644 --- a/arch/mips/loongson/common/cs5536/Makefile +++ b/arch/mips/loongson/common/cs5536/Makefile @@ -5,4 +5,9 @@ obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \ cs5536_isa.o cs5536_ehci.o +# +# Enable cs5536 mfgpt Timer +# +obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o + EXTRA_CFLAGS += -Werror diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c new file mode 100644 index 000000000000..6cb44dbaeec2 --- /dev/null +++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c @@ -0,0 +1,217 @@ +/* + * CS5536 General timer functions + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu zhangjin, wuzj@lemote.com + * + * Reference: AMD Geode(TM) CS5536 Companion Device Data Book + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +DEFINE_SPINLOCK(mfgpt_lock); +EXPORT_SYMBOL(mfgpt_lock); + +static u32 mfgpt_base; + +/* + * Initialize the MFGPT timer. + * + * This is also called after resume to bring the MFGPT into operation again. + */ + +/* disable counter */ +void disable_mfgpt0_counter(void) +{ + outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP); +} +EXPORT_SYMBOL(disable_mfgpt0_counter); + +/* enable counter, comparator2 to event mode, 14.318MHz clock */ +void enable_mfgpt0_counter(void) +{ + outw(0xe310, MFGPT0_SETUP); +} +EXPORT_SYMBOL(enable_mfgpt0_counter); + +static void init_mfgpt_timer(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + spin_lock(&mfgpt_lock); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + outw(COMPARE, MFGPT0_CMP2); /* set comparator2 */ + outw(0, MFGPT0_CNT); /* set counter to 0 */ + enable_mfgpt0_counter(); + break; + + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + if (evt->mode == CLOCK_EVT_MODE_PERIODIC || + evt->mode == CLOCK_EVT_MODE_ONESHOT) + disable_mfgpt0_counter(); + break; + + case CLOCK_EVT_MODE_ONESHOT: + /* The oneshot mode have very high deviation, Not use it! */ + break; + + case CLOCK_EVT_MODE_RESUME: + /* Nothing to do here */ + break; + } + spin_unlock(&mfgpt_lock); +} + +static struct clock_event_device mfgpt_clockevent = { + .name = "mfgpt", + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_mode = init_mfgpt_timer, + .irq = CS5536_MFGPT_INTR, +}; + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + u32 basehi; + + /* + * get MFGPT base address + * + * NOTE: do not remove me, it's need for the value of mfgpt_base is + * variable + */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); + + /* ack */ + outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP); + + mfgpt_clockevent.event_handler(&mfgpt_clockevent); + + return IRQ_HANDLED; +} + +static struct irqaction irq5 = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, + .name = "timer" +}; + +/* + * Initialize the conversion factor and the min/max deltas of the clock event + * structure and register the clock event source with the framework. + */ +void __init setup_mfgpt0_timer(void) +{ + u32 basehi; + struct clock_event_device *cd = &mfgpt_clockevent; + unsigned int cpu = smp_processor_id(); + + cd->cpumask = cpumask_of(cpu); + clockevent_set_clock(cd, MFGPT_TICK_RATE); + cd->max_delta_ns = clockevent_delta2ns(0xffff, cd); + cd->min_delta_ns = clockevent_delta2ns(0xf, cd); + + /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */ + _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100); + + /* Enable Interrupt Gate 5 */ + _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000); + + /* get MFGPT base address */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); + + clockevents_register_device(cd); + + setup_irq(CS5536_MFGPT_INTR, &irq5); +} + +/* + * Since the MFGPT overflows every tick, its not very useful + * to just read by itself. So use jiffies to emulate a free + * running counter: + */ +static cycle_t mfgpt_read(struct clocksource *cs) +{ + unsigned long flags; + int count; + u32 jifs; + static int old_count; + static u32 old_jifs; + + spin_lock_irqsave(&mfgpt_lock, flags); + /* + * Although our caller may have the read side of xtime_lock, + * this is now a seqlock, and we are cheating in this routine + * by having side effects on state that we cannot undo if + * there is a collision on the seqlock and our caller has to + * retry. (Namely, old_jifs and old_count.) So we must treat + * jiffies as volatile despite the lock. We read jiffies + * before latching the timer count to guarantee that although + * the jiffies value might be older than the count (that is, + * the counter may underflow between the last point where + * jiffies was incremented and the point where we latch the + * count), it cannot be newer. + */ + jifs = jiffies; + /* read the count */ + count = inw(MFGPT0_CNT); + + /* + * It's possible for count to appear to go the wrong way for this + * reason: + * + * The timer counter underflows, but we haven't handled the resulting + * interrupt and incremented jiffies yet. + * + * Previous attempts to handle these cases intelligently were buggy, so + * we just do the simple thing now. + */ + if (count < old_count && jifs == old_jifs) + count = old_count; + + old_count = count; + old_jifs = jifs; + + spin_unlock_irqrestore(&mfgpt_lock, flags); + + return (cycle_t) (jifs * COMPARE) + count; +} + +static struct clocksource clocksource_mfgpt = { + .name = "mfgpt", + .rating = 120, /* Functional for real use, but not desired */ + .read = mfgpt_read, + .mask = CLOCKSOURCE_MASK(32), + .mult = 0, + .shift = 22, +}; + +int __init init_mfgpt_clocksource(void) +{ + if (num_possible_cpus() > 1) /* MFGPT does not scale! */ + return 0; + + clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22); + return clocksource_register(&clocksource_mfgpt); +} + +arch_initcall(init_mfgpt_clocksource); diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c index 6e08c8270abe..35f0b66a94f5 100644 --- a/arch/mips/loongson/common/time.c +++ b/arch/mips/loongson/common/time.c @@ -14,11 +14,14 @@ #include #include +#include void __init plat_time_init(void) { /* setup mips r4k timer */ mips_hpt_frequency = cpu_clock_freq / 2; + + setup_mfgpt0_timer(); } void read_persistent_clock(struct timespec *ts) -- GitLab From 9726b43a4d7aaa5b30f559e78768aeb3d17bc224 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 17 Nov 2009 01:32:58 +0800 Subject: [PATCH 228/618] MIPS: Add basic CPUFreq options. This patch adds basic options for MIPS CPUFreq support. Since the cp0 timer's frequency is based on the processor clockrate it can not be used with CPUFReq; an additional external timer is required. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Cc: cpufreq@vger.kernel.org, Cc: Dave Jones , Cc: Dominik Brodowski , Cc: yanh@lemote.com Cc: huhb@lemote.com, Patchwork: http://patchwork.linux-mips.org/patch/659/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 3 +++ arch/mips/kernel/cpufreq/Kconfig | 27 +++++++++++++++++++++++++++ 2 files changed, 30 insertions(+) create mode 100644 arch/mips/kernel/cpufreq/Kconfig diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e7f385444d41..435838ec9591 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2161,6 +2161,7 @@ config MMU config I8253 bool + select MIPS_EXTERNAL_TIMER config ZONE_DMA32 bool @@ -2237,6 +2238,8 @@ source "kernel/power/Kconfig" endmenu +source "arch/mips/kernel/cpufreq/Kconfig" + source "net/Kconfig" source "drivers/Kconfig" diff --git a/arch/mips/kernel/cpufreq/Kconfig b/arch/mips/kernel/cpufreq/Kconfig new file mode 100644 index 000000000000..37983a15dabe --- /dev/null +++ b/arch/mips/kernel/cpufreq/Kconfig @@ -0,0 +1,27 @@ +# +# CPU Frequency scaling +# + +config MIPS_EXTERNAL_TIMER + bool + +config MIPS_CPUFREQ + bool + default y + depends on CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER + +if MIPS_CPUFREQ + +menu "CPU Frequency scaling" + +source "drivers/cpufreq/Kconfig" + +if CPU_FREQ + +comment "CPUFreq processor drivers" + +endif # CPU_FREQ + +endmenu + +endif # MIPS_CPUFREQ -- GitLab From f8ede0f700f5478851f242f291d203cde54ca6cf Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 17 Nov 2009 01:32:59 +0800 Subject: [PATCH 229/618] MIPS: Loongson 2F: Add CPU frequency scaling support Loongson 2F supports CPU clock scaling. When put it into wait mode by setting the frequency as ZERO it will stay in this mode until an external interrupt wakes the CPU again. To enable clock scaling support, an external timer of a known stable rate is required. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Cc: cpufreq@vger.kernel.org, Cc: Dave Jones , Cc: Dominik Brodowski , Cc: yanh@lemote.com Cc: huhb@lemote.com, Patchwork: http://patchwork.linux-mips.org/patch/660/ Patchwork: http://patchwork.linux-mips.org/patch/751/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/clock.h | 64 +++++ arch/mips/include/asm/cpu.h | 2 + .../mips/include/asm/mach-loongson/loongson.h | 6 +- arch/mips/kernel/Makefile | 2 + arch/mips/kernel/cpu-probe.c | 2 + arch/mips/kernel/cpufreq/Kconfig | 14 ++ arch/mips/kernel/cpufreq/Makefile | 5 + arch/mips/kernel/cpufreq/loongson2_clock.c | 166 +++++++++++++ arch/mips/kernel/cpufreq/loongson2_cpufreq.c | 227 ++++++++++++++++++ arch/mips/loongson/Kconfig | 5 +- arch/mips/loongson/common/Makefile | 2 +- arch/mips/loongson/common/env.c | 3 + arch/mips/loongson/common/platform.c | 30 +++ 13 files changed, 524 insertions(+), 4 deletions(-) create mode 100644 arch/mips/include/asm/clock.h create mode 100644 arch/mips/kernel/cpufreq/Makefile create mode 100644 arch/mips/kernel/cpufreq/loongson2_clock.c create mode 100644 arch/mips/kernel/cpufreq/loongson2_cpufreq.c create mode 100644 arch/mips/loongson/common/platform.c diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h new file mode 100644 index 000000000000..83894aa7932c --- /dev/null +++ b/arch/mips/include/asm/clock.h @@ -0,0 +1,64 @@ +#ifndef __ASM_MIPS_CLOCK_H +#define __ASM_MIPS_CLOCK_H + +#include +#include +#include +#include + +extern void (*cpu_wait) (void); + +struct clk; + +struct clk_ops { + void (*init) (struct clk *clk); + void (*enable) (struct clk *clk); + void (*disable) (struct clk *clk); + void (*recalc) (struct clk *clk); + int (*set_rate) (struct clk *clk, unsigned long rate, int algo_id); + long (*round_rate) (struct clk *clk, unsigned long rate); +}; + +struct clk { + struct list_head node; + const char *name; + int id; + struct module *owner; + + struct clk *parent; + struct clk_ops *ops; + + struct kref kref; + + unsigned long rate; + unsigned long flags; +}; + +#define CLK_ALWAYS_ENABLED (1 << 0) +#define CLK_RATE_PROPAGATES (1 << 1) + +/* Should be defined by processor-specific code */ +void arch_init_clk_ops(struct clk_ops **, int type); + +int clk_init(void); + +int __clk_enable(struct clk *); +void __clk_disable(struct clk *); + +void clk_recalc_rate(struct clk *); + +int clk_register(struct clk *); +void clk_unregister(struct clk *); + +/* the exported API, in addition to clk_set_rate */ +/** + * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter + * @clk: clock source + * @rate: desired clock rate in Hz + * @algo_id: algorithm id to be passed down to ops->set_rate + * + * Returns success (0) or negative errno. + */ +int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id); + +#endif /* __ASM_MIPS_CLOCK_H */ diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 4b96d1a36056..cf373a95fe4a 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -154,6 +154,8 @@ #define PRID_REV_VR4181A 0x0070 /* Same as VR4122 */ #define PRID_REV_VR4130 0x0080 #define PRID_REV_34K_V1_0_2 0x0022 +#define PRID_REV_LOONGSON2E 0x0002 +#define PRID_REV_LOONGSON2F 0x0003 /* * Older processors used to encode processor version and revision in two diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index 9bccdb5d4b51..a7fa66e85988 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -226,8 +226,12 @@ extern void mach_irq_dispatch(unsigned int pending); #define LOONGSON_PCIMAP_WIN(WIN, ADDR) \ ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) -/* Chip Config */ #ifdef CONFIG_CPU_SUPPORTS_CPUFREQ +#include +extern void loongson2_cpu_wait(void); +extern struct cpufreq_frequency_table loongson2_clockmod_table[]; + +/* Chip Config */ #define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80) #endif diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index a446aa20ac83..f442de804d8a 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -93,4 +93,6 @@ CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/n obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o +obj-$(CONFIG_MIPS_CPUFREQ) += cpufreq/ + EXTRA_CFLAGS += -Werror diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 7a51866068a4..80e202eca056 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -32,6 +33,7 @@ * the CPU very much. */ void (*cpu_wait)(void); +EXPORT_SYMBOL(cpu_wait); static void r3081_wait(void) { diff --git a/arch/mips/kernel/cpufreq/Kconfig b/arch/mips/kernel/cpufreq/Kconfig index 37983a15dabe..58c601eee6fd 100644 --- a/arch/mips/kernel/cpufreq/Kconfig +++ b/arch/mips/kernel/cpufreq/Kconfig @@ -20,6 +20,20 @@ if CPU_FREQ comment "CPUFreq processor drivers" +config LOONGSON2_CPUFREQ + tristate "Loongson2 CPUFreq Driver" + select CPU_FREQ_TABLE + depends on MIPS_CPUFREQ + help + This option adds a CPUFreq driver for loongson processors which + support software configurable cpu frequency. + + Loongson2F and it's successors support this feature. + + For details, take a look at . + + If in doubt, say N. + endif # CPU_FREQ endmenu diff --git a/arch/mips/kernel/cpufreq/Makefile b/arch/mips/kernel/cpufreq/Makefile new file mode 100644 index 000000000000..c3479a432efe --- /dev/null +++ b/arch/mips/kernel/cpufreq/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Linux/MIPS cpufreq. +# + +obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o loongson2_clock.o diff --git a/arch/mips/kernel/cpufreq/loongson2_clock.c b/arch/mips/kernel/cpufreq/loongson2_clock.c new file mode 100644 index 000000000000..d7ca256e33ef --- /dev/null +++ b/arch/mips/kernel/cpufreq/loongson2_clock.c @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include + +#include + +#include + +static LIST_HEAD(clock_list); +static DEFINE_SPINLOCK(clock_lock); +static DEFINE_MUTEX(clock_list_sem); + +/* Minimum CLK support */ +enum { + DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT, + DC_87PT, DC_DISABLE, DC_RESV +}; + +struct cpufreq_frequency_table loongson2_clockmod_table[] = { + {DC_RESV, CPUFREQ_ENTRY_INVALID}, + {DC_ZERO, CPUFREQ_ENTRY_INVALID}, + {DC_25PT, 0}, + {DC_37PT, 0}, + {DC_50PT, 0}, + {DC_62PT, 0}, + {DC_75PT, 0}, + {DC_87PT, 0}, + {DC_DISABLE, 0}, + {DC_RESV, CPUFREQ_TABLE_END}, +}; +EXPORT_SYMBOL_GPL(loongson2_clockmod_table); + +static struct clk cpu_clk = { + .name = "cpu_clk", + .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, + .rate = 800000000, +}; + +struct clk *clk_get(struct device *dev, const char *id) +{ + return &cpu_clk; +} +EXPORT_SYMBOL(clk_get); + +static void propagate_rate(struct clk *clk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clock_list, node) { + if (likely(clkp->parent != clk)) + continue; + if (likely(clkp->ops && clkp->ops->recalc)) + clkp->ops->recalc(clkp); + if (unlikely(clkp->flags & CLK_RATE_PROPAGATES)) + propagate_rate(clkp); + } +} + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + return clk_set_rate_ex(clk, rate, 0); +} +EXPORT_SYMBOL_GPL(clk_set_rate); + +int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id) +{ + int ret = 0; + int regval; + int i; + + if (likely(clk->ops && clk->ops->set_rate)) { + unsigned long flags; + + spin_lock_irqsave(&clock_lock, flags); + ret = clk->ops->set_rate(clk, rate, algo_id); + spin_unlock_irqrestore(&clock_lock, flags); + } + + if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) + propagate_rate(clk); + + for (i = 0; loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END; + i++) { + if (loongson2_clockmod_table[i].frequency == + CPUFREQ_ENTRY_INVALID) + continue; + if (rate == loongson2_clockmod_table[i].frequency) + break; + } + if (rate != loongson2_clockmod_table[i].frequency) + return -ENOTSUPP; + + clk->rate = rate; + + regval = LOONGSON_CHIPCFG0; + regval = (regval & ~0x7) | (loongson2_clockmod_table[i].index - 1); + LOONGSON_CHIPCFG0 = regval; + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_rate_ex); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (likely(clk->ops && clk->ops->round_rate)) { + unsigned long flags, rounded; + + spin_lock_irqsave(&clock_lock, flags); + rounded = clk->ops->round_rate(clk, rate); + spin_unlock_irqrestore(&clock_lock, flags); + + return rounded; + } + + return rate; +} +EXPORT_SYMBOL_GPL(clk_round_rate); + +/* + * This is the simple version of Loongson-2 wait, Maybe we need do this in + * interrupt disabled content + */ + +DEFINE_SPINLOCK(loongson2_wait_lock); +void loongson2_cpu_wait(void) +{ + u32 cpu_freq; + unsigned long flags; + + spin_lock_irqsave(&loongson2_wait_lock, flags); + cpu_freq = LOONGSON_CHIPCFG0; + LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */ + LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */ + spin_unlock_irqrestore(&loongson2_wait_lock, flags); +} +EXPORT_SYMBOL_GPL(loongson2_cpu_wait); diff --git a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c new file mode 100644 index 000000000000..2f6a0b147ab8 --- /dev/null +++ b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c @@ -0,0 +1,227 @@ +/* + * Cpufreq driver for the loongson-2 processors + * + * The 2E revision of loongson processor not support this feature. + * + * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include /* set_cpus_allowed() */ +#include +#include + +#include + +#include + +static uint nowait; + +static struct clk *cpuclk; + +static void (*saved_cpu_wait) (void); + +static int loongson2_cpu_freq_notifier(struct notifier_block *nb, + unsigned long val, void *data); + +static struct notifier_block loongson2_cpufreq_notifier_block = { + .notifier_call = loongson2_cpu_freq_notifier +}; + +static int loongson2_cpu_freq_notifier(struct notifier_block *nb, + unsigned long val, void *data) +{ + if (val == CPUFREQ_POSTCHANGE) + current_cpu_data.udelay_val = loops_per_jiffy; + + return 0; +} + +static unsigned int loongson2_cpufreq_get(unsigned int cpu) +{ + return clk_get_rate(cpuclk); +} + +/* + * Here we notify other drivers of the proposed change and the final change. + */ +static int loongson2_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int cpu = policy->cpu; + unsigned int newstate = 0; + cpumask_t cpus_allowed; + struct cpufreq_freqs freqs; + unsigned int freq; + + if (!cpu_online(cpu)) + return -ENODEV; + + cpus_allowed = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + + if (cpufreq_frequency_table_target + (policy, &loongson2_clockmod_table[0], target_freq, relation, + &newstate)) + return -EINVAL; + + freq = + ((cpu_clock_freq / 1000) * + loongson2_clockmod_table[newstate].index) / 8; + if (freq < policy->min || freq > policy->max) + return -EINVAL; + + pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000); + + freqs.cpu = cpu; + freqs.old = loongson2_cpufreq_get(cpu); + freqs.new = freq; + freqs.flags = 0; + + if (freqs.new == freqs.old) + return 0; + + /* notifiers */ + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + set_cpus_allowed(current, cpus_allowed); + + /* setting the cpu frequency */ + clk_set_rate(cpuclk, freq); + + /* notifiers */ + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + pr_debug("cpufreq: set frequency %u kHz\n", freq); + + return 0; +} + +static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + int i; + + if (!cpu_online(policy->cpu)) + return -ENODEV; + + cpuclk = clk_get(NULL, "cpu_clk"); + if (IS_ERR(cpuclk)) { + printk(KERN_ERR "cpufreq: couldn't get CPU clk\n"); + return PTR_ERR(cpuclk); + } + + cpuclk->rate = cpu_clock_freq / 1000; + if (!cpuclk->rate) + return -EINVAL; + + /* clock table init */ + for (i = 2; + (loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END); + i++) + loongson2_clockmod_table[i].frequency = (cpuclk->rate * i) / 8; + + policy->cur = loongson2_cpufreq_get(policy->cpu); + + cpufreq_frequency_table_get_attr(&loongson2_clockmod_table[0], + policy->cpu); + + return cpufreq_frequency_table_cpuinfo(policy, + &loongson2_clockmod_table[0]); +} + +static int loongson2_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, + &loongson2_clockmod_table[0]); +} + +static int loongson2_cpufreq_exit(struct cpufreq_policy *policy) +{ + clk_put(cpuclk); + return 0; +} + +static struct freq_attr *loongson2_table_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver loongson2_cpufreq_driver = { + .owner = THIS_MODULE, + .name = "loongson2", + .init = loongson2_cpufreq_cpu_init, + .verify = loongson2_cpufreq_verify, + .target = loongson2_cpufreq_target, + .get = loongson2_cpufreq_get, + .exit = loongson2_cpufreq_exit, + .attr = loongson2_table_attr, +}; + +static struct platform_device_id platform_device_ids[] = { + { + .name = "loongson2_cpufreq", + }, + {} +}; + +MODULE_DEVICE_TABLE(platform, platform_device_ids); + +static struct platform_driver platform_driver = { + .driver = { + .name = "loongson2_cpufreq", + .owner = THIS_MODULE, + }, + .id_table = platform_device_ids, +}; + +static int __init cpufreq_init(void) +{ + int ret; + + /* Register platform stuff */ + ret = platform_driver_register(&platform_driver); + if (ret) + return ret; + + pr_info("cpufreq: Loongson-2F CPU frequency driver.\n"); + + cpufreq_register_notifier(&loongson2_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + ret = cpufreq_register_driver(&loongson2_cpufreq_driver); + + if (!ret && !nowait) { + saved_cpu_wait = cpu_wait; + cpu_wait = loongson2_cpu_wait; + } + + return ret; +} + +static void __exit cpufreq_exit(void) +{ + if (!nowait && saved_cpu_wait) + cpu_wait = saved_cpu_wait; + cpufreq_unregister_driver(&loongson2_cpufreq_driver); + cpufreq_unregister_notifier(&loongson2_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + platform_driver_unregister(&platform_driver); +} + +module_init(cpufreq_init); +module_exit(cpufreq_exit); + +module_param(nowait, uint, 0644); +MODULE_PARM_DESC(nowait, "Disable Loongson-2F specific wait"); + +MODULE_AUTHOR("Yanhua "); +MODULE_DESCRIPTION("cpufreq driver for Loongson2F"); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index 8b5cc138611a..7a86987b478f 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -34,10 +34,10 @@ config LEMOTE_MACH2F select ARCH_SPARSEMEM_ENABLE select BOARD_SCACHE select BOOT_ELF32 - select CEVT_R4K + select CEVT_R4K if ! MIPS_EXTERNAL_TIMER select CPU_HAS_WB select CS5536 - select CSRC_R4K + select CSRC_R4K if ! MIPS_EXTERNAL_TIMER select DMA_NONCOHERENT select GENERIC_HARDIRQS_NO__DO_IRQ select GENERIC_ISA_DMA_SUPPORT_BROKEN @@ -65,6 +65,7 @@ config CS5536 config CS5536_MFGPT bool "CS5536 MFGPT Timer" depends on CS5536 + select MIPS_EXTERNAL_TIMER help This option enables the mfgpt0 timer of AMD CS5536. diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index a21724d50e2c..8d71892413df 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -3,7 +3,7 @@ # obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ - pci.o bonito-irq.o mem.o machtype.o uart_base.o + pci.o bonito-irq.o mem.o machtype.o platform.o uart_base.o # # Early printk support diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c index b9ef50385541..196d947d929a 100644 --- a/arch/mips/loongson/common/env.c +++ b/arch/mips/loongson/common/env.c @@ -17,11 +17,14 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ +#include + #include #include unsigned long bus_clock, cpu_clock_freq; +EXPORT_SYMBOL(cpu_clock_freq); unsigned long memsize, highmemsize; /* pmon passes arguments in 32bit pointers */ diff --git a/arch/mips/loongson/common/platform.c b/arch/mips/loongson/common/platform.c new file mode 100644 index 000000000000..be81777eb94d --- /dev/null +++ b/arch/mips/loongson/common/platform.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +static struct platform_device loongson2_cpufreq_device = { + .name = "loongson2_cpufreq", + .id = -1, +}; + +static int __init loongson2_cpufreq_init(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + /* Only 2F revision and it's successors support CPUFreq */ + if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F) + return platform_device_register(&loongson2_cpufreq_device); + + return -ENODEV; +} + +arch_initcall(loongson2_cpufreq_init); -- GitLab From 8922f79ee56e9dab6fc144defc0bc901ff0a7f8a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 17 Nov 2009 22:51:03 +0000 Subject: [PATCH 230/618] MIPS: Fixup last users of irq_chip->typename The typename member of struct irq_chip was kept for migration purposes and is obsolete since more than 2 years. Fix up the leftovers. Signed-off-by: Thomas Gleixner Cc: linux-mips@linux-mips.org To: LKML Cc: Ingo Molnar Patchwork: http://patchwork.linux-mips.org/patch/661/ Signed-off-by: Ralf Baechle --- arch/mips/nxp/pnx833x/common/interrupts.c | 4 ++-- arch/mips/sni/a20r.c | 2 +- arch/mips/sni/pcimt.c | 2 +- arch/mips/sni/pcit.c | 2 +- arch/mips/sni/rm200.c | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/mips/nxp/pnx833x/common/interrupts.c b/arch/mips/nxp/pnx833x/common/interrupts.c index 30533ba200e2..3a467c04f811 100644 --- a/arch/mips/nxp/pnx833x/common/interrupts.c +++ b/arch/mips/nxp/pnx833x/common/interrupts.c @@ -295,7 +295,7 @@ static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type) } static struct irq_chip pnx833x_pic_irq_type = { - .typename = "PNX-PIC", + .name = "PNX-PIC", .startup = pnx833x_startup_pic_irq, .shutdown = pnx833x_shutdown_pic_irq, .enable = pnx833x_enable_pic_irq, @@ -305,7 +305,7 @@ static struct irq_chip pnx833x_pic_irq_type = { }; static struct irq_chip pnx833x_gpio_irq_type = { - .typename = "PNX-GPIO", + .name = "PNX-GPIO", .startup = pnx833x_startup_gpio_irq, .shutdown = pnx833x_disable_gpio_irq, .enable = pnx833x_enable_gpio_irq, diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c index 7dd76fb3b645..e6980892834a 100644 --- a/arch/mips/sni/a20r.c +++ b/arch/mips/sni/a20r.c @@ -188,7 +188,7 @@ static void end_a20r_irq(unsigned int irq) } static struct irq_chip a20r_irq_type = { - .typename = "A20R", + .name = "A20R", .ack = mask_a20r_irq, .mask = mask_a20r_irq, .mask_ack = mask_a20r_irq, diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c index 74e6c67982fb..51e62bbaa23b 100644 --- a/arch/mips/sni/pcimt.c +++ b/arch/mips/sni/pcimt.c @@ -214,7 +214,7 @@ static void end_pcimt_irq(unsigned int irq) } static struct irq_chip pcimt_irq_type = { - .typename = "PCIMT", + .name = "PCIMT", .ack = disable_pcimt_irq, .mask = disable_pcimt_irq, .mask_ack = disable_pcimt_irq, diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c index 071a9573ac7f..f4699d35858b 100644 --- a/arch/mips/sni/pcit.c +++ b/arch/mips/sni/pcit.c @@ -176,7 +176,7 @@ void end_pcit_irq(unsigned int irq) } static struct irq_chip pcit_irq_type = { - .typename = "PCIT", + .name = "PCIT", .ack = disable_pcit_irq, .mask = disable_pcit_irq, .mask_ack = disable_pcit_irq, diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index 5e687819cbc2..46f00691f448 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -449,7 +449,7 @@ void end_rm200_irq(unsigned int irq) } static struct irq_chip rm200_irq_type = { - .typename = "RM200", + .name = "RM200", .ack = disable_rm200_irq, .mask = disable_rm200_irq, .mask_ack = disable_rm200_irq, -- GitLab From d2bb0762993e11363d8343127516b8fe88f9006f Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 20 Nov 2009 20:34:29 +0800 Subject: [PATCH 231/618] MIPS: Tracing: Add static function tracer support for MIPS If -pg of gcc is enabled with CONFIG_FUNCTION_TRACER=y. a calling to _mcount will be inserted into each kernel function. so, there is a possibility to trace the kernel functions in _mcount. This patch add the MIPS specific _mcount support for static function tracing. by default, ftrace_trace_function is initialized as ftrace_stub(an empty function), so, the default _mcount will introduce very little overhead. after enabling ftrace in user-space, it will jump to a real tracing function and do static function tracing for us. and -ffunction-sections is incompatible with -pg, so, disable it when ftracer is enabled. Signed-off-by: Wu Zhangjin Reviewed-by: Steven Rostedt Cc: Nicholas Mc Guire Cc: zhangfx@lemote.com Cc: Wu Zhangjin Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/672/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/Makefile | 2 + arch/mips/include/asm/ftrace.h | 25 +++++++++- arch/mips/kernel/Makefile | 6 +++ arch/mips/kernel/mcount.S | 83 ++++++++++++++++++++++++++++++++++ arch/mips/kernel/mips_ksyms.c | 5 ++ 6 files changed, 121 insertions(+), 1 deletion(-) create mode 100644 arch/mips/kernel/mcount.S diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 435838ec9591..632dba2ac300 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -5,6 +5,7 @@ config MIPS select HAVE_IDE select HAVE_OPROFILE select HAVE_ARCH_KGDB + select HAVE_FUNCTION_TRACER # Horrible source of confusion. Die, die, die ... select EMBEDDED select RTC_LIB if !MACH_LOONGSON diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 0a7e6146bb4b..3725ee923d05 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -48,7 +48,9 @@ ifneq ($(SUBARCH),$(ARCH)) endif endif +ifndef CONFIG_FUNCTION_TRACER cflags-y := -ffunction-sections +endif cflags-y += $(call cc-option, -mno-check-zero-division) ifdef CONFIG_32BIT diff --git a/arch/mips/include/asm/ftrace.h b/arch/mips/include/asm/ftrace.h index 40a8c178f10d..5f8ebcf9fa61 100644 --- a/arch/mips/include/asm/ftrace.h +++ b/arch/mips/include/asm/ftrace.h @@ -1 +1,24 @@ -/* empty */ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + * + * Copyright (C) 2009 DSLab, Lanzhou University, China + * Author: Wu Zhangjin + */ + +#ifndef _ASM_MIPS_FTRACE_H +#define _ASM_MIPS_FTRACE_H + +#ifdef CONFIG_FUNCTION_TRACER + +#define MCOUNT_ADDR ((unsigned long)(_mcount)) +#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ + +#ifndef __ASSEMBLY__ +extern void _mcount(void); +#define mcount _mcount + +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_FUNCTION_TRACER */ +#endif /* _ASM_MIPS_FTRACE_H */ diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index f442de804d8a..1340ba3dd38d 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -10,6 +10,10 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ ptrace.o reset.o setup.o signal.o syscall.o \ time.o topology.o traps.o unaligned.o watch.o +ifdef CONFIG_FUNCTION_TRACER +CFLAGS_REMOVE_early_printk.o = -pg +endif + obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o obj-$(CONFIG_CEVT_R4K_LIB) += cevt-r4k.o obj-$(CONFIG_MIPS_MT_SMTC) += cevt-smtc.o @@ -27,6 +31,8 @@ obj-$(CONFIG_SYNC_R4K) += sync-r4k.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_MODULES) += mips_ksyms.o module.o +obj-$(CONFIG_FUNCTION_TRACER) += mcount.o + obj-$(CONFIG_CPU_LOONGSON2) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S new file mode 100644 index 000000000000..cebcc3c11305 --- /dev/null +++ b/arch/mips/kernel/mcount.S @@ -0,0 +1,83 @@ +/* + * MIPS specific _mcount support + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + * + * Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China + * Author: Wu Zhangjin + */ + +#include +#include +#include + + .text + .set noreorder + .set noat + + .macro MCOUNT_SAVE_REGS + PTR_SUBU sp, PT_SIZE + PTR_S ra, PT_R31(sp) + PTR_S AT, PT_R1(sp) + PTR_S a0, PT_R4(sp) + PTR_S a1, PT_R5(sp) + PTR_S a2, PT_R6(sp) + PTR_S a3, PT_R7(sp) +#ifdef CONFIG_64BIT + PTR_S a4, PT_R8(sp) + PTR_S a5, PT_R9(sp) + PTR_S a6, PT_R10(sp) + PTR_S a7, PT_R11(sp) +#endif + .endm + + .macro MCOUNT_RESTORE_REGS + PTR_L ra, PT_R31(sp) + PTR_L AT, PT_R1(sp) + PTR_L a0, PT_R4(sp) + PTR_L a1, PT_R5(sp) + PTR_L a2, PT_R6(sp) + PTR_L a3, PT_R7(sp) +#ifdef CONFIG_64BIT + PTR_L a4, PT_R8(sp) + PTR_L a5, PT_R9(sp) + PTR_L a6, PT_R10(sp) + PTR_L a7, PT_R11(sp) +#endif +#ifdef CONFIG_64BIT + PTR_ADDIU sp, PT_SIZE +#else + PTR_ADDIU sp, (PT_SIZE + 8) +#endif +.endm + + .macro RETURN_BACK + jr ra + move ra, AT + .endm + +NESTED(_mcount, PT_SIZE, ra) + PTR_LA t0, ftrace_stub + PTR_L t1, ftrace_trace_function /* Prepare t1 for (1) */ + bne t0, t1, static_trace + nop + b ftrace_stub + nop + +static_trace: + MCOUNT_SAVE_REGS + + move a0, ra /* arg1: next ip, selfaddr */ + jalr t1 /* (1) call *ftrace_trace_function */ + move a1, AT /* arg2: the caller's next ip, parent */ + + MCOUNT_RESTORE_REGS + .globl ftrace_stub +ftrace_stub: + RETURN_BACK + END(_mcount) + + .set at + .set reorder diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c index 225755d0c1f6..1d04807874db 100644 --- a/arch/mips/kernel/mips_ksyms.c +++ b/arch/mips/kernel/mips_ksyms.c @@ -13,6 +13,7 @@ #include #include #include +#include extern void *__bzero(void *__s, size_t __count); extern long __strncpy_from_user_nocheck_asm(char *__to, @@ -51,3 +52,7 @@ EXPORT_SYMBOL(csum_partial_copy_nocheck); EXPORT_SYMBOL(__csum_partial_copy_user); EXPORT_SYMBOL(invalid_pte_table); +#ifdef CONFIG_FUNCTION_TRACER +/* _mcount is defined in arch/mips/kernel/mcount.S */ +EXPORT_SYMBOL(_mcount); +#endif -- GitLab From 69a7d1b3ec64786cfc8a16ef3e8585d1f93d3944 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 20 Nov 2009 20:34:30 +0800 Subject: [PATCH 232/618] MIPS: Tracing: Enable HAVE_FUNCTION_TRACE_MCOUNT_TEST for MIPS There is an exisiting common ftrace_test_stop_func() in kernel/trace/ftrace.c, which is used to check the global variable ftrace_trace_stop to determine whether stop the function tracing. This patch implepment the MIPS specific one to speedup the procedure. Thanks goes to Zhang Le for Cleaning it up. Signed-off-by: Wu Zhangjin Cc: Steven Rostedt Cc: Nicholas Mc Guire Cc: zhangfx@lemote.com Cc: Wu Zhangjin Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/673/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/kernel/mcount.S | 3 +++ 2 files changed, 4 insertions(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 632dba2ac300..d203dbfa8037 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -6,6 +6,7 @@ config MIPS select HAVE_OPROFILE select HAVE_ARCH_KGDB select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_TRACE_MCOUNT_TEST # Horrible source of confusion. Die, die, die ... select EMBEDDED select RTC_LIB if !MACH_LOONGSON diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S index cebcc3c11305..cbb45edad464 100644 --- a/arch/mips/kernel/mcount.S +++ b/arch/mips/kernel/mcount.S @@ -59,6 +59,9 @@ .endm NESTED(_mcount, PT_SIZE, ra) + lw t0, function_trace_stop + bnez t0, ftrace_stub + nop PTR_LA t0, ftrace_stub PTR_L t1, ftrace_trace_function /* Prepare t1 for (1) */ bne t0, t1, static_trace -- GitLab From e6299d2677e600f6a0bf93bbb89f20d3de5252de Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 20 Nov 2009 20:34:31 +0800 Subject: [PATCH 233/618] MIPS: Tracing: Add an endian argument to scripts/recordmcount.pl MIPS and some other architectures need this argument to handle big/little endian respectively. Signed-off-by: Wu Zhangjin Cc: Nicholas Mc Guire Cc: zhangfx@lemote.com Cc: Wu Zhangjin Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/674/ Acked-by: Steven Rostedt Signed-off-by: Ralf Baechle --- scripts/Makefile.build | 1 + scripts/recordmcount.pl | 6 +++--- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 341b58902ffc..0b94d2fa3a88 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -207,6 +207,7 @@ endif ifdef CONFIG_FTRACE_MCOUNT_RECORD cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ + "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ "$(if $(CONFIG_64BIT),64,32)" \ "$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ "$(if $(part-of-module),1,0)" "$(@)"; diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index 9cf0a6fad6ba..ab368e8a007d 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -113,13 +113,13 @@ $P =~ s@.*/@@g; my $V = '0.1'; -if ($#ARGV != 10) { - print "usage: $P arch bits objdump objcopy cc ld nm rm mv is_module inputfile\n"; +if ($#ARGV != 11) { + print "usage: $P arch endian bits objdump objcopy cc ld nm rm mv is_module inputfile\n"; print "version: $V\n"; exit(1); } -my ($arch, $bits, $objdump, $objcopy, $cc, +my ($arch, $endian, $bits, $objdump, $objcopy, $cc, $ld, $nm, $rm, $mv, $is_module, $inputfile) = @ARGV; # This file refers to mcount and shouldn't be ftraced, so lets' ignore it -- GitLab From 538f19526e40ce7a5a296fad6a3121409c890adc Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 20 Nov 2009 20:34:32 +0800 Subject: [PATCH 234/618] MIPS: Tracing: Add dynamic function tracer support With dynamic function tracer, by default, _mcount is defined as an "empty" function, it returns directly without any more action . When enabling it in user-space, it will jump to a real tracing function(ftrace_caller), and do the real job for us. Differ from the static function tracer, dynamic function tracer provides two functions ftrace_make_call()/ftrace_make_nop() to enable/disable the tracing of some indicated kernel functions(set_ftrace_filter). In the -v4 version, the implementation of this support is basically the same as X86 version does: _mcount is implemented as an empty function and ftrace_caller is implemented as a real tracing function respectively. But in this version, to support module tracing with the help of -mlong-calls in arch/mips/Makefile: MODFLAGS += -mlong-calls. The stuff becomes a little more complex. We need to cope with two different type of calling to _mcount. For the kernel part, the calling to _mcount(result of "objdump -hdr vmlinux"). is like this: 108: 03e0082d move at,ra 10c: 0c000000 jal 0 10c: R_MIPS_26 _mcount 10c: R_MIPS_NONE *ABS* 10c: R_MIPS_NONE *ABS* 110: 00020021 nop For the module with -mlong-calls, it looks like this: c: 3c030000 lui v1,0x0 c: R_MIPS_HI16 _mcount c: R_MIPS_NONE *ABS* c: R_MIPS_NONE *ABS* 10: 64630000 daddiu v1,v1,0 10: R_MIPS_LO16 _mcount 10: R_MIPS_NONE *ABS* 10: R_MIPS_NONE *ABS* 14: 03e0082d move at,ra 18: 0060f809 jalr v1 In the kernel version, there is only one "_mcount" string for every kernel function, so, we just need to match this one in mcount_regex of scripts/recordmcount.pl, but in the module version, we need to choose one of the two to match. Herein, I choose the first one with "R_MIPS_HI16 _mcount". and In the kernel verion, without module tracing support, we just need to replace "jal _mcount" by "jal ftrace_caller" to do real tracing, and filter the tracing of some kernel functions via replacing it by a nop instruction. but as we have described before, the instruction "jal ftrace_caller" only left 32bit length for the address of ftrace_caller, it will fail when calling from the module space. so, herein, we must replace something else. the basic idea is loading the address of ftrace_caller to v1 via changing these two instructions: lui v1,0x0 addiu v1,v1,0 If we want to enable the tracing, we need to replace the above instructions to: lui v1, HI_16BIT_ftrace_caller addiu v1, v1, LOW_16BIT_ftrace_caller If we want to stop the tracing of the indicated kernel functions, we just need to replace the "jalr v1" to a nop instruction. but we need to replace two instructions and encode the above two instructions oursevles. Is there a simpler solution? Yes! Here it is, in this version, we put _mcount and ftrace_caller together, which means the address of _mcount and ftrace_caller is the same: _mcount: ftrace_caller: j ftrace_stub nop ...(do real tracing here)... ftrace_stub: jr ra move ra, at By default, the kernel functions call _mcount, and then jump to ftrace_stub and return. and when we want to do real tracing, we just need to remove that "j ftrace_stub", and it will run through the two "nop" instructions and then do the real tracing job. what about filtering job? we just need to do this: lui v1, hi_16bit_of_mcount <--> b 1f (0x10000004) addiu v1, v1, low_16bit_of_mcount move at, ra jalr v1 nop 1f: (rec->ip + 12) In linux-mips64, there will be some local symbols, whose name are prefixed by $L, which need to be filtered. thanks goes to Steven for writing the mips64-specific function_regex. In a conclusion, with RISC, things becomes easier with such a "stupid" trick, RISC is something like K.I.S.S, and also, there are lots of "simple" tricks in the whole ftrace support, thanks goes to Steven and the other folks for providing such a wonderful tracing framework! Signed-off-by: Wu Zhangjin Cc: Nicholas Mc Guire Cc: zhangfx@lemote.com Cc: Wu Zhangjin Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/675/ Acked-by: Steven Rostedt Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 + arch/mips/include/asm/ftrace.h | 9 +++ arch/mips/kernel/Makefile | 3 +- arch/mips/kernel/ftrace.c | 112 +++++++++++++++++++++++++++++++++ arch/mips/kernel/mcount.S | 29 +++++++++ scripts/recordmcount.pl | 52 +++++++++++++++ 6 files changed, 206 insertions(+), 1 deletion(-) create mode 100644 arch/mips/kernel/ftrace.c diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index d203dbfa8037..af6940c5b272 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -7,6 +7,8 @@ config MIPS select HAVE_ARCH_KGDB select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_TRACE_MCOUNT_TEST + select HAVE_DYNAMIC_FTRACE + select HAVE_FTRACE_MCOUNT_RECORD # Horrible source of confusion. Die, die, die ... select EMBEDDED select RTC_LIB if !MACH_LOONGSON diff --git a/arch/mips/include/asm/ftrace.h b/arch/mips/include/asm/ftrace.h index 5f8ebcf9fa61..7094a40b96d8 100644 --- a/arch/mips/include/asm/ftrace.h +++ b/arch/mips/include/asm/ftrace.h @@ -19,6 +19,15 @@ extern void _mcount(void); #define mcount _mcount +#ifdef CONFIG_DYNAMIC_FTRACE +static inline unsigned long ftrace_call_adjust(unsigned long addr) +{ + return addr; +} + +struct dyn_arch_ftrace { +}; +#endif /* CONFIG_DYNAMIC_FTRACE */ #endif /* __ASSEMBLY__ */ #endif /* CONFIG_FUNCTION_TRACER */ #endif /* _ASM_MIPS_FTRACE_H */ diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 1340ba3dd38d..8dda21463226 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -11,6 +11,7 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ time.o topology.o traps.o unaligned.o watch.o ifdef CONFIG_FUNCTION_TRACER +CFLAGS_REMOVE_ftrace.o = -pg CFLAGS_REMOVE_early_printk.o = -pg endif @@ -31,7 +32,7 @@ obj-$(CONFIG_SYNC_R4K) += sync-r4k.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_MODULES) += mips_ksyms.o module.o -obj-$(CONFIG_FUNCTION_TRACER) += mcount.o +obj-$(CONFIG_FUNCTION_TRACER) += mcount.o ftrace.o obj-$(CONFIG_CPU_LOONGSON2) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c new file mode 100644 index 000000000000..5459a7838370 --- /dev/null +++ b/arch/mips/kernel/ftrace.c @@ -0,0 +1,112 @@ +/* + * Code for replacing ftrace calls with jumps. + * + * Copyright (C) 2007-2008 Steven Rostedt + * Copyright (C) 2009 DSLab, Lanzhou University, China + * Author: Wu Zhangjin + * + * Thanks goes to Steven Rostedt for writing the original x86 version. + */ + +#include +#include +#include + +#include + +#ifdef CONFIG_DYNAMIC_FTRACE + +#define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */ +#define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */ +#define jump_insn_encode(op_code, addr) \ + ((unsigned int)((op_code) | (((addr) >> 2) & ADDR_MASK))) + +static unsigned int ftrace_nop = 0x00000000; + +static int ftrace_modify_code(unsigned long ip, unsigned int new_code) +{ + *(unsigned int *)ip = new_code; + + flush_icache_range(ip, ip + 8); + + return 0; +} + +static int lui_v1; +static int jal_mcount; + +int ftrace_make_nop(struct module *mod, + struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned int new; + unsigned long ip = rec->ip; + + /* We have compiled module with -mlong-calls, but compiled the kernel + * without it, we need to cope with them respectively. */ + if (ip & 0x40000000) { + /* record it for ftrace_make_call */ + if (lui_v1 == 0) + lui_v1 = *(unsigned int *)ip; + + /* lui v1, hi_16bit_of_mcount --> b 1f (0x10000004) + * addiu v1, v1, low_16bit_of_mcount + * move at, ra + * jalr v1 + * nop + * 1f: (ip + 12) + */ + new = 0x10000004; + } else { + /* record/calculate it for ftrace_make_call */ + if (jal_mcount == 0) { + /* We can record it directly like this: + * jal_mcount = *(unsigned int *)ip; + * Herein, jump over the first two nop instructions */ + jal_mcount = jump_insn_encode(JAL, (MCOUNT_ADDR + 8)); + } + + /* move at, ra + * jalr v1 --> nop + */ + new = ftrace_nop; + } + return ftrace_modify_code(ip, new); +} + +static int modified; /* initialized as 0 by default */ + +int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned int new; + unsigned long ip = rec->ip; + + /* We just need to remove the "b ftrace_stub" at the fist time! */ + if (modified == 0) { + modified = 1; + ftrace_modify_code(addr, ftrace_nop); + } + /* ip, module: 0xc0000000, kernel: 0x80000000 */ + new = (ip & 0x40000000) ? lui_v1 : jal_mcount; + + return ftrace_modify_code(ip, new); +} + +#define FTRACE_CALL_IP ((unsigned long)(&ftrace_call)) + +int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned int new; + + new = jump_insn_encode(JAL, (unsigned long)func); + + return ftrace_modify_code(FTRACE_CALL_IP, new); +} + +int __init ftrace_dyn_arch_init(void *data) +{ + /* The return code is retured via data */ + *(unsigned long *)data = 0; + + return 0; +} +#endif /* CONFIG_DYNAMIC_FTRACE */ diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S index cbb45edad464..ffc425979d4f 100644 --- a/arch/mips/kernel/mcount.S +++ b/arch/mips/kernel/mcount.S @@ -58,6 +58,33 @@ move ra, AT .endm +#ifdef CONFIG_DYNAMIC_FTRACE + +NESTED(ftrace_caller, PT_SIZE, ra) + .globl _mcount +_mcount: + b ftrace_stub + nop + lw t0, function_trace_stop + bnez t0, ftrace_stub + nop + + MCOUNT_SAVE_REGS + + move a0, ra /* arg1: next ip, selfaddr */ + .globl ftrace_call +ftrace_call: + nop /* a placeholder for the call to a real tracing function */ + move a1, AT /* arg2: the caller's next ip, parent */ + + MCOUNT_RESTORE_REGS + .globl ftrace_stub +ftrace_stub: + RETURN_BACK + END(ftrace_caller) + +#else /* ! CONFIG_DYNAMIC_FTRACE */ + NESTED(_mcount, PT_SIZE, ra) lw t0, function_trace_stop bnez t0, ftrace_stub @@ -82,5 +109,7 @@ ftrace_stub: RETURN_BACK END(_mcount) +#endif /* ! CONFIG_DYNAMIC_FTRACE */ + .set at .set reorder diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index ab368e8a007d..92f09fe9639e 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -295,6 +295,58 @@ if ($arch eq "x86_64") { $ld .= " -m elf64_sparc"; $cc .= " -m64"; $objcopy .= " -O elf64-sparc"; +} elsif ($arch eq "mips") { + # To enable module support, we need to enable the -mlong-calls option + # of gcc for module, after using this option, we can not get the real + # offset of the calling to _mcount, but the offset of the lui + # instruction or the addiu one. herein, we record the address of the + # first one, and then we can replace this instruction by a branch + # instruction to jump over the profiling function to filter the + # indicated functions, or swith back to the lui instruction to trace + # them, which means dynamic tracing. + # + # c: 3c030000 lui v1,0x0 + # c: R_MIPS_HI16 _mcount + # c: R_MIPS_NONE *ABS* + # c: R_MIPS_NONE *ABS* + # 10: 64630000 daddiu v1,v1,0 + # 10: R_MIPS_LO16 _mcount + # 10: R_MIPS_NONE *ABS* + # 10: R_MIPS_NONE *ABS* + # 14: 03e0082d move at,ra + # 18: 0060f809 jalr v1 + # + # for the kernel: + # + # 10: 03e0082d move at,ra + # 14: 0c000000 jal 0 + # 14: R_MIPS_26 _mcount + # 14: R_MIPS_NONE *ABS* + # 14: R_MIPS_NONE *ABS* + # 18: 00020021 nop + if ($is_module eq "0") { + $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$"; + } else { + $mcount_regex = "^\\s*([0-9a-fA-F]+): R_MIPS_HI16\\s+_mcount\$"; + } + $objdump .= " -Melf-trad".$endian."mips "; + + if ($endian eq "big") { + $endian = " -EB "; + $ld .= " -melf".$bits."btsmip"; + } else { + $endian = " -EL "; + $ld .= " -melf".$bits."ltsmip"; + } + + $cc .= " -mno-abicalls -fno-pic -mabi=" . $bits . $endian; + $ld .= $endian; + + if ($bits == 64) { + $function_regex = + "^([0-9a-fA-F]+)\\s+<(.|[^\$]L.*?|\$[^L].*?|[^\$][^L].*?)>:"; + $type = ".dword"; + } } elsif ($arch eq "microblaze") { # Microblaze calls '_mcount' instead of plain 'mcount'. $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$"; -- GitLab From 8f99a162653531ef25a3dd0f92bfb6332cd2b295 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 20 Nov 2009 20:34:33 +0800 Subject: [PATCH 235/618] MIPS: Tracing: Add IRQENTRY_EXIT section for MIPS This patch add a new section for MIPS to record the block of the hardirq handling for function graph tracer(print_graph_irq) via adding the __irq_entry annotation to the the entrypoints of the hardirqs(the block with irq_enter()...irq_exit()). Thanks goes to Steven & Frederic Weisbecker for their feedbacks. Signed-off-by: Wu Zhangjin Cc: Steven Rostedt Cc: Nicholas Mc Guire Cc: zhangfx@lemote.com Cc: Wu Zhangjin Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Reviewed-by: Frederic Weisbecker Patchwork: http://patchwork.linux-mips.org/patch/676/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/irq.h | 29 ++--------------------------- arch/mips/kernel/irq.c | 30 ++++++++++++++++++++++++++++++ arch/mips/kernel/smp.c | 3 ++- arch/mips/kernel/smtc.c | 21 ++++++++++++++------- arch/mips/kernel/vmlinux.lds.S | 1 + arch/mips/sgi-ip22/ip22-int.c | 3 ++- arch/mips/sgi-ip22/ip22-time.c | 3 ++- 7 files changed, 53 insertions(+), 37 deletions(-) diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index 09b08d05ff72..06960364c96b 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -113,36 +113,11 @@ do { \ #endif -/* - * do_IRQ handles all normal device IRQ's (the special - * SMP cross-CPU interrupts have their own specific - * handlers). - * - * Ideally there should be away to get this into kernel/irq/handle.c to - * avoid the overhead of a call for just a tiny function ... - */ -#define do_IRQ(irq) \ -do { \ - irq_enter(); \ - __DO_IRQ_SMTC_HOOK(irq); \ - generic_handle_irq(irq); \ - irq_exit(); \ -} while (0) +extern void do_IRQ(unsigned int irq); #ifdef CONFIG_MIPS_MT_SMTC_IRQAFF -/* - * To avoid inefficient and in some cases pathological re-checking of - * IRQ affinity, we have this variant that skips the affinity check. - */ - -#define do_IRQ_no_affinity(irq) \ -do { \ - irq_enter(); \ - __NO_AFFINITY_IRQ_SMTC_HOOK(irq); \ - generic_handle_irq(irq); \ - irq_exit(); \ -} while (0) +extern void do_IRQ_no_affinity(unsigned int irq); #endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 8b0b4181219f..981f86c26168 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -150,3 +151,32 @@ void __init init_IRQ(void) kgdb_early_setup = 1; #endif } + +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ +void __irq_entry do_IRQ(unsigned int irq) +{ + irq_enter(); + __DO_IRQ_SMTC_HOOK(irq); + generic_handle_irq(irq); + irq_exit(); +} + +#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF +/* + * To avoid inefficient and in some cases pathological re-checking of + * IRQ affinity, we have this variant that skips the affinity check. + */ + +void __irq_entry do_IRQ_no_affinity(unsigned int irq) +{ + irq_enter(); + __NO_AFFINITY_IRQ_SMTC_HOOK(irq); + generic_handle_irq(irq); + irq_exit(); +} + +#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index e72e6844d134..6cdca1956b77 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -130,7 +131,7 @@ asmlinkage __cpuinit void start_secondary(void) /* * Call into both interrupt handlers, as we share the IPI for them */ -void smp_call_function_interrupt(void) +void __irq_entry smp_call_function_interrupt(void) { irq_enter(); generic_smp_call_function_single_interrupt(); diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index a38e3ee95515..23499b5bd9c3 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -939,23 +940,29 @@ static void ipi_call_interrupt(void) DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); -void ipi_decode(struct smtc_ipi *pipi) +static void __irq_entry smtc_clock_tick_interrupt(void) { unsigned int cpu = smp_processor_id(); struct clock_event_device *cd; + int irq = MIPS_CPU_IRQ_BASE + 1; + + irq_enter(); + kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); + irq_exit(); +} + +void ipi_decode(struct smtc_ipi *pipi) +{ void *arg_copy = pipi->arg; int type_copy = pipi->type; - int irq = MIPS_CPU_IRQ_BASE + 1; smtc_ipi_nq(&freeIPIq, pipi); switch (type_copy) { case SMTC_CLOCK_TICK: - irq_enter(); - kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); - cd = &per_cpu(mips_clockevent_device, cpu); - cd->event_handler(cd); - irq_exit(); + smtc_clock_tick_interrupt(); break; case LINUX_SMP_IPI: diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 162b29954baa..f25df73db923 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -46,6 +46,7 @@ SECTIONS SCHED_TEXT LOCK_TEXT KPROBES_TEXT + IRQENTRY_TEXT *(.text.*) *(.fixup) *(.gnu.warning) diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index 0ecd5fe9486e..383f11d7f442 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -150,7 +151,7 @@ static void indy_local1_irqdispatch(void) extern void ip22_be_interrupt(int irq); -static void indy_buserror_irq(void) +static void __irq_entry indy_buserror_irq(void) { int irq = SGI_BUSERR_IRQ; diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index c8f7d2328b24..603fc91c1030 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -115,7 +116,7 @@ __init void plat_time_init(void) } /* Generic SGI handler for (spurious) 8254 interrupts */ -void indy_8254timer_irq(void) +void __irq_entry indy_8254timer_irq(void) { int irq = SGI_8254_0_IRQ; ULONG cnt; -- GitLab From 29c5d3462f7c8f17bb9e0a29f0a299036468074d Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 20 Nov 2009 20:34:34 +0800 Subject: [PATCH 236/618] MIPS: Tracing: Add function graph tracer support for MIPS The implementation of function graph tracer for MIPS is a little different from X86. in MIPS, gcc(with -pg) only transfer the caller's return address(at) and the _mcount's return address(ra) to us. For the kernel part without -mlong-calls: move at, ra jal _mcount For the module part with -mlong-calls: lui v1, hi16bit_of_mcount addiu v1, v1, low16bit_of_mcount move at, ra jal _mcount Without -mlong-calls, if the function is a leaf, it will not save the return address(ra): ffffffff80101298 : ffffffff80101298: 67bdfff0 daddiu sp,sp,-16 ffffffff8010129c: ffbe0008 sd s8,8(sp) ffffffff801012a0: 03a0f02d move s8,sp ffffffff801012a4: 03e0082d move at,ra ffffffff801012a8: 0c042930 jal ffffffff8010a4c0 <_mcount> ffffffff801012ac: 00020021 nop so, we can hijack it directly in _mcount, but if the function is non-leaf, the return address is saved in the stack. ffffffff80133030 : ffffffff80133030: 67bdff50 daddiu sp,sp,-176 ffffffff80133034: ffbe00a0 sd s8,160(sp) ffffffff80133038: 03a0f02d move s8,sp ffffffff8013303c: ffbf00a8 sd ra,168(sp) ffffffff80133040: ffb70098 sd s7,152(sp) ffffffff80133044: ffb60090 sd s6,144(sp) ffffffff80133048: ffb50088 sd s5,136(sp) ffffffff8013304c: ffb40080 sd s4,128(sp) ffffffff80133050: ffb30078 sd s3,120(sp) ffffffff80133054: ffb20070 sd s2,112(sp) ffffffff80133058: ffb10068 sd s1,104(sp) ffffffff8013305c: ffb00060 sd s0,96(sp) ffffffff80133060: 03e0082d move at,ra ffffffff80133064: 0c042930 jal ffffffff8010a4c0 <_mcount> ffffffff80133068: 00020021 nop but we can not get the exact stack address(which saved ra) directly in _mcount, we need to search the content of at register in the stack space or search the "s{d,w} ra, offset(sp)" instruction in the text. 'Cause we can not prove there is only a match in the stack space, so, we search the text instead. as we can see, if the first instruction above "move at, ra" is not a store instruction, there should be a leaf function, so we hijack the at register directly via putting &return_to_handler into it, otherwise, we search the "s{d,w} ra, offset(sp)" instruction to get the stack offset, and then the stack address. we use the above copy_process() as an example, we at last find "ffbf00a8", 0xa8 is the stack offset, we plus it with s8(fp), that is the stack address, we hijack the content via writing the &return_to_handler in. If with -mlong-calls, since there are two more instructions above "move at, ra", so, we can move the pointer to the position above "lui v1, hi16bit_of_mcount". Signed-off-by: Wu Zhangjin Cc: Steven Rostedt Cc: Nicholas Mc Guire Cc: zhangfx@lemote.com Cc: Wu Zhangjin Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/677/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/kernel/ftrace.c | 106 ++++++++++++++++++++++++++++++++++++++ arch/mips/kernel/mcount.S | 42 +++++++++++++++ 3 files changed, 149 insertions(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index af6940c5b272..2906ae59af49 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -9,6 +9,7 @@ config MIPS select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_FUNCTION_GRAPH_TRACER # Horrible source of confusion. Die, die, die ... select EMBEDDED select RTC_LIB if !MACH_LOONGSON diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index 5459a7838370..65a3f8a89927 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -13,6 +13,8 @@ #include #include +#include +#include #ifdef CONFIG_DYNAMIC_FTRACE @@ -110,3 +112,107 @@ int __init ftrace_dyn_arch_init(void *data) return 0; } #endif /* CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + +#define S_RA_SP (0xafbf << 16) /* s{d,w} ra, offset(sp) */ +#define S_R_SP (0xafb0 << 16) /* s{d,w} R, offset(sp) */ +#define OFFSET_MASK 0xffff /* stack offset range: 0 ~ PT_SIZE */ + +unsigned long ftrace_get_parent_addr(unsigned long self_addr, + unsigned long parent, + unsigned long parent_addr, + unsigned long fp) +{ + unsigned long sp, ip, ra; + unsigned int code; + + /* in module or kernel? */ + if (self_addr & 0x40000000) { + /* module: move to the instruction "lui v1, HI_16BIT_OF_MCOUNT" */ + ip = self_addr - 20; + } else { + /* kernel: move to the instruction "move ra, at" */ + ip = self_addr - 12; + } + + /* search the text until finding the non-store instruction or "s{d,w} + * ra, offset(sp)" instruction */ + do { + ip -= 4; + + /* get the code at "ip" */ + code = *(unsigned int *)ip; + + /* If we hit the non-store instruction before finding where the + * ra is stored, then this is a leaf function and it does not + * store the ra on the stack. */ + if ((code & S_R_SP) != S_R_SP) + return parent_addr; + + } while (((code & S_RA_SP) != S_RA_SP)); + + sp = fp + (code & OFFSET_MASK); + ra = *(unsigned long *)sp; + + if (ra == parent) + return sp; + + return 0; +} + +/* + * Hook the return address and push it in the stack of return addrs + * in current thread info. + */ +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, + unsigned long fp) +{ + unsigned long old; + struct ftrace_graph_ent trace; + unsigned long return_hooker = (unsigned long) + &return_to_handler; + + if (unlikely(atomic_read(¤t->tracing_graph_pause))) + return; + + /* "parent" is the stack address saved the return address of the caller + * of _mcount, for a leaf function not save the return address in the + * stack address, so, we "emulate" one in _mcount's stack space, and + * hijack it directly, but for a non-leaf function, it will save the + * return address to the its stack space, so, we can not hijack the + * "parent" directly, but need to find the real stack address, + * ftrace_get_parent_addr() does it! + */ + + old = *parent; + + parent = (unsigned long *)ftrace_get_parent_addr(self_addr, old, + (unsigned long)parent, + fp); + + /* If fails when getting the stack address of the non-leaf function's + * ra, stop function graph tracer and return */ + if (parent == 0) { + ftrace_graph_stop(); + WARN_ON(1); + return; + } + + *parent = return_hooker; + + if (ftrace_push_return_trace(old, self_addr, &trace.depth, fp) == + -EBUSY) { + *parent = old; + return; + } + + trace.func = self_addr; + + /* Only trace if the calling function expects to */ + if (!ftrace_graph_entry(&trace)) { + current->curr_ret_stack--; + *parent = old; + } +} +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S index ffc425979d4f..b50e38d828c4 100644 --- a/arch/mips/kernel/mcount.S +++ b/arch/mips/kernel/mcount.S @@ -93,6 +93,16 @@ NESTED(_mcount, PT_SIZE, ra) PTR_L t1, ftrace_trace_function /* Prepare t1 for (1) */ bne t0, t1, static_trace nop + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + PTR_L t2, ftrace_graph_return + bne t0, t2, ftrace_graph_caller + nop + PTR_LA t0, ftrace_graph_entry_stub + PTR_L t2, ftrace_graph_entry + bne t0, t2, ftrace_graph_caller + nop +#endif b ftrace_stub nop @@ -111,5 +121,37 @@ ftrace_stub: #endif /* ! CONFIG_DYNAMIC_FTRACE */ +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + +NESTED(ftrace_graph_caller, PT_SIZE, ra) + MCOUNT_SAVE_REGS + + PTR_LA a0, PT_R1(sp) /* arg1: &AT -> a0 */ + move a1, ra /* arg2: next ip, selfaddr */ + jal prepare_ftrace_return + move a2, fp /* arg3: frame pointer */ + + MCOUNT_RESTORE_REGS + RETURN_BACK + END(ftrace_graph_caller) + + .align 2 + .globl return_to_handler +return_to_handler: + PTR_SUBU sp, PT_SIZE + PTR_S v0, PT_R2(sp) + + jal ftrace_return_to_handler + PTR_S v1, PT_R3(sp) + + /* restore the real parent address: v0 -> ra */ + move ra, v0 + + PTR_L v0, PT_R2(sp) + PTR_L v1, PT_R3(sp) + jr ra + PTR_ADDIU sp, PT_SIZE +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + .set at .set reorder -- GitLab From e17ff5fec65a0213416efbe7ceae5f2f9887dda2 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 20 Nov 2009 20:34:35 +0800 Subject: [PATCH 237/618] MIPS: Tracing: Add dynamic function graph tracer for MIPS This patch make function graph tracer work with dynamic function tracer. To share the source code of dynamic function tracer(MCOUNT_SAVE_REGS), and avoid restoring the whole saved registers, we need to restore the ra register from the stack. (NOTE: This not work with 32bit! need to ensure why!) Signed-off-by: Wu Zhangjin Cc: Steven Rostedt Cc: Nicholas Mc Guire Cc: zhangfx@lemote.com Cc: Wu Zhangjin Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/678/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/ftrace.c | 21 +++++++++++++++++++++ arch/mips/kernel/mcount.S | 14 ++++++++++++-- 2 files changed, 33 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index 65a3f8a89927..e981a497c98f 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -115,6 +115,27 @@ int __init ftrace_dyn_arch_init(void *data) #ifdef CONFIG_FUNCTION_GRAPH_TRACER +#ifdef CONFIG_DYNAMIC_FTRACE + +extern void ftrace_graph_call(void); +#define JMP 0x08000000 /* jump to target directly */ +#define CALL_FTRACE_GRAPH_CALLER \ + jump_insn_encode(JMP, (unsigned long)(&ftrace_graph_caller)) +#define FTRACE_GRAPH_CALL_IP ((unsigned long)(&ftrace_graph_call)) + +int ftrace_enable_ftrace_graph_caller(void) +{ + return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, + CALL_FTRACE_GRAPH_CALLER); +} + +int ftrace_disable_ftrace_graph_caller(void) +{ + return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, ftrace_nop); +} + +#endif /* !CONFIG_DYNAMIC_FTRACE */ + #define S_RA_SP (0xafbf << 16) /* s{d,w} ra, offset(sp) */ #define S_R_SP (0xafb0 << 16) /* s{d,w} R, offset(sp) */ #define OFFSET_MASK 0xffff /* stack offset range: 0 ~ PT_SIZE */ diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S index b50e38d828c4..98d469032506 100644 --- a/arch/mips/kernel/mcount.S +++ b/arch/mips/kernel/mcount.S @@ -77,6 +77,13 @@ ftrace_call: nop /* a placeholder for the call to a real tracing function */ move a1, AT /* arg2: the caller's next ip, parent */ +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + .globl ftrace_graph_call +ftrace_graph_call: + nop + nop +#endif + MCOUNT_RESTORE_REGS .globl ftrace_stub ftrace_stub: @@ -124,10 +131,13 @@ ftrace_stub: #ifdef CONFIG_FUNCTION_GRAPH_TRACER NESTED(ftrace_graph_caller, PT_SIZE, ra) +#ifdef CONFIG_DYNAMIC_FTRACE + PTR_L a1, PT_R31(sp) /* load the original ra from the stack */ +#else MCOUNT_SAVE_REGS - - PTR_LA a0, PT_R1(sp) /* arg1: &AT -> a0 */ move a1, ra /* arg2: next ip, selfaddr */ +#endif + PTR_LA a0, PT_R1(sp) /* arg1: &AT -> a0 */ jal prepare_ftrace_return move a2, fp /* arg3: frame pointer */ -- GitLab From 046199cae714a7f9e88f5a7940b077f4515f48cb Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 20 Nov 2009 20:34:36 +0800 Subject: [PATCH 238/618] MIPS: Tracing: Make ftrace for MIPS work without -fno-omit-frame-pointer When remove the -fno-omit-frame-pointer, gcc will not save the frame pointer for us, we need to save one ourselves. Signed-off-by: Wu Zhangjin Cc: Steven Rostedt Cc: Nicholas Mc Guire Cc: zhangfx@lemote.com Cc: Wu Zhangjin Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/679/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/ftrace.h | 57 ++++++++++++++++++++++++++++++++++ arch/mips/kernel/ftrace.c | 56 ++++++++++++++++++++++++--------- arch/mips/kernel/mcount.S | 8 +++++ 3 files changed, 106 insertions(+), 15 deletions(-) diff --git a/arch/mips/include/asm/ftrace.h b/arch/mips/include/asm/ftrace.h index 7094a40b96d8..3986cd8704f3 100644 --- a/arch/mips/include/asm/ftrace.h +++ b/arch/mips/include/asm/ftrace.h @@ -19,6 +19,62 @@ extern void _mcount(void); #define mcount _mcount +#define safe_load(load, src, dst, error) \ +do { \ + asm volatile ( \ + "1: " load " %[" STR(dst) "], 0(%[" STR(src) "])\n"\ + " li %[" STR(error) "], 0\n" \ + "2:\n" \ + \ + ".section .fixup, \"ax\"\n" \ + "3: li %[" STR(error) "], 1\n" \ + " j 2b\n" \ + ".previous\n" \ + \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR) "\t1b, 3b\n\t" \ + ".previous\n" \ + \ + : [dst] "=&r" (dst), [error] "=r" (error)\ + : [src] "r" (src) \ + : "memory" \ + ); \ +} while (0) + +#define safe_store(store, src, dst, error) \ +do { \ + asm volatile ( \ + "1: " store " %[" STR(src) "], 0(%[" STR(dst) "])\n"\ + " li %[" STR(error) "], 0\n" \ + "2:\n" \ + \ + ".section .fixup, \"ax\"\n" \ + "3: li %[" STR(error) "], 1\n" \ + " j 2b\n" \ + ".previous\n" \ + \ + ".section\t__ex_table,\"a\"\n\t"\ + STR(PTR) "\t1b, 3b\n\t" \ + ".previous\n" \ + \ + : [error] "=r" (error) \ + : [dst] "r" (dst), [src] "r" (src)\ + : "memory" \ + ); \ +} while (0) + +#define safe_load_code(dst, src, error) \ + safe_load(STR(lw), src, dst, error) +#define safe_store_code(src, dst, error) \ + safe_store(STR(sw), src, dst, error) + +#define safe_load_stack(dst, src, error) \ + safe_load(STR(PTR_L), src, dst, error) + +#define safe_store_stack(src, dst, error) \ + safe_store(STR(PTR_S), src, dst, error) + + #ifdef CONFIG_DYNAMIC_FTRACE static inline unsigned long ftrace_call_adjust(unsigned long addr) { @@ -27,6 +83,7 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr) struct dyn_arch_ftrace { }; + #endif /* CONFIG_DYNAMIC_FTRACE */ #endif /* __ASSEMBLY__ */ #endif /* CONFIG_FUNCTION_TRACER */ diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index e981a497c98f..e363fc69aabd 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -27,7 +27,13 @@ static unsigned int ftrace_nop = 0x00000000; static int ftrace_modify_code(unsigned long ip, unsigned int new_code) { - *(unsigned int *)ip = new_code; + int faulted; + + /* *(unsigned int *)ip = new_code; */ + safe_store_code(new_code, ip, faulted); + + if (unlikely(faulted)) + return -EFAULT; flush_icache_range(ip, ip + 8); @@ -41,14 +47,20 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr) { unsigned int new; + int faulted; unsigned long ip = rec->ip; /* We have compiled module with -mlong-calls, but compiled the kernel * without it, we need to cope with them respectively. */ if (ip & 0x40000000) { /* record it for ftrace_make_call */ - if (lui_v1 == 0) - lui_v1 = *(unsigned int *)ip; + if (lui_v1 == 0) { + /* lui_v1 = *(unsigned int *)ip; */ + safe_load_code(lui_v1, ip, faulted); + + if (unlikely(faulted)) + return -EFAULT; + } /* lui v1, hi_16bit_of_mcount --> b 1f (0x10000004) * addiu v1, v1, low_16bit_of_mcount @@ -147,6 +159,7 @@ unsigned long ftrace_get_parent_addr(unsigned long self_addr, { unsigned long sp, ip, ra; unsigned int code; + int faulted; /* in module or kernel? */ if (self_addr & 0x40000000) { @@ -162,8 +175,11 @@ unsigned long ftrace_get_parent_addr(unsigned long self_addr, do { ip -= 4; - /* get the code at "ip" */ - code = *(unsigned int *)ip; + /* get the code at "ip": code = *(unsigned int *)ip; */ + safe_load_code(code, ip, faulted); + + if (unlikely(faulted)) + return 0; /* If we hit the non-store instruction before finding where the * ra is stored, then this is a leaf function and it does not @@ -174,11 +190,14 @@ unsigned long ftrace_get_parent_addr(unsigned long self_addr, } while (((code & S_RA_SP) != S_RA_SP)); sp = fp + (code & OFFSET_MASK); - ra = *(unsigned long *)sp; + + /* ra = *(unsigned long *)sp; */ + safe_load_stack(ra, sp, faulted); + if (unlikely(faulted)) + return 0; if (ra == parent) return sp; - return 0; } @@ -193,6 +212,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, struct ftrace_graph_ent trace; unsigned long return_hooker = (unsigned long) &return_to_handler; + int faulted; if (unlikely(atomic_read(¤t->tracing_graph_pause))) return; @@ -206,21 +226,23 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, * ftrace_get_parent_addr() does it! */ - old = *parent; + /* old = *parent; */ + safe_load_stack(old, parent, faulted); + if (unlikely(faulted)) + goto out; parent = (unsigned long *)ftrace_get_parent_addr(self_addr, old, (unsigned long)parent, fp); - /* If fails when getting the stack address of the non-leaf function's * ra, stop function graph tracer and return */ - if (parent == 0) { - ftrace_graph_stop(); - WARN_ON(1); - return; - } + if (parent == 0) + goto out; - *parent = return_hooker; + /* *parent = return_hooker; */ + safe_store_stack(return_hooker, parent, faulted); + if (unlikely(faulted)) + goto out; if (ftrace_push_return_trace(old, self_addr, &trace.depth, fp) == -EBUSY) { @@ -235,5 +257,9 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, current->curr_ret_stack--; *parent = old; } + return; +out: + ftrace_graph_stop(); + WARN_ON(1); } #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S index 98d469032506..bdfef2c24f16 100644 --- a/arch/mips/kernel/mcount.S +++ b/arch/mips/kernel/mcount.S @@ -139,7 +139,15 @@ NESTED(ftrace_graph_caller, PT_SIZE, ra) #endif PTR_LA a0, PT_R1(sp) /* arg1: &AT -> a0 */ jal prepare_ftrace_return +#ifdef CONFIG_FRAME_POINTER move a2, fp /* arg3: frame pointer */ +#else +#ifdef CONFIG_64BIT + PTR_LA a2, PT_SIZE(sp) +#else + PTR_LA a2, (PT_SIZE+8)(sp) +#endif +#endif MCOUNT_RESTORE_REGS RETURN_BACK -- GitLab From fc49a3be2be7a0cd44fcd3b37557d6d92cae59b1 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 20 Nov 2009 20:34:37 +0800 Subject: [PATCH 239/618] MIPS: Tracing: Reserve $12(t0) for mcount-ra-address of gcc 4.5 A new option -mmcount-ra-address for gcc 4.5 have been sent by David Daney in the thread "MIPS: Add option to pass return address location to _mcount", which help to record the location of the return address(ra) for the function graph tracer of MIPS to hijack the return address easier and safer. that option used the $12(t0) register by default, so, we reserve it for it, and use t1,t2,t3 instead of t0,t1,t2. Signed-off-by: Wu Zhangjin Cc: Steven Rostedt Cc: Nicholas Mc Guire Cc: zhangfx@lemote.com Cc: Wu Zhangjin Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/680/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/mcount.S | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S index bdfef2c24f16..522e91c688fc 100644 --- a/arch/mips/kernel/mcount.S +++ b/arch/mips/kernel/mcount.S @@ -65,8 +65,8 @@ NESTED(ftrace_caller, PT_SIZE, ra) _mcount: b ftrace_stub nop - lw t0, function_trace_stop - bnez t0, ftrace_stub + lw t1, function_trace_stop + bnez t1, ftrace_stub nop MCOUNT_SAVE_REGS @@ -93,21 +93,21 @@ ftrace_stub: #else /* ! CONFIG_DYNAMIC_FTRACE */ NESTED(_mcount, PT_SIZE, ra) - lw t0, function_trace_stop - bnez t0, ftrace_stub + lw t1, function_trace_stop + bnez t1, ftrace_stub nop - PTR_LA t0, ftrace_stub - PTR_L t1, ftrace_trace_function /* Prepare t1 for (1) */ - bne t0, t1, static_trace + PTR_LA t1, ftrace_stub + PTR_L t2, ftrace_trace_function /* Prepare t2 for (1) */ + bne t1, t2, static_trace nop #ifdef CONFIG_FUNCTION_GRAPH_TRACER - PTR_L t2, ftrace_graph_return - bne t0, t2, ftrace_graph_caller + PTR_L t3, ftrace_graph_return + bne t1, t3, ftrace_graph_caller nop - PTR_LA t0, ftrace_graph_entry_stub - PTR_L t2, ftrace_graph_entry - bne t0, t2, ftrace_graph_caller + PTR_LA t1, ftrace_graph_entry_stub + PTR_L t3, ftrace_graph_entry + bne t1, t3, ftrace_graph_caller nop #endif b ftrace_stub @@ -117,7 +117,7 @@ static_trace: MCOUNT_SAVE_REGS move a0, ra /* arg1: next ip, selfaddr */ - jalr t1 /* (1) call *ftrace_trace_function */ + jalr t2 /* (1) call *ftrace_trace_function */ move a1, AT /* arg2: the caller's next ip, parent */ MCOUNT_RESTORE_REGS -- GitLab From 7326c4e567b50e689d13c04d58aeffa515277ebb Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 20 Nov 2009 20:34:38 +0800 Subject: [PATCH 240/618] MIPS: Tracing: Make function graph tracer work with -mmcount-ra-address That thread "MIPS: Add option to pass return address location to _mcount" from "David Daney " have added a new option -mmcount-ra-address to gcc(4.5) for MIPS to transfer the location of the return address to _mcount. Benefit from this new feature, function graph tracer on MIPS will be easier and safer to hijack the return address of the kernel function, which will save some overhead and make the whole thing more reliable. In this patch, at first, try to enable the option -mmcount-ra-address in arch/mips/Makefile with cc-option, if gcc support it, it will be enabled, otherwise, no side effect. and then, we need to support this new option of gcc 4.5 and also support the old gcc versions. with _mcount in the old gcc versions, it's not easy to get the location of return address(tracing: add function graph tracer support for MIPS), so, we do it in a C function: ftrace_get_parent_addr(ftrace.c), but with -mmcount-ra-address, only several instructions need to get what we want, so, I put into asm(mcount.S). and also, as the $12(t0) is used by -mmcount-ra-address for transferring the localtion of return address to _mcount, we need to save it into the stack and restore it when enabled dynamic function tracer, 'Cause we have called "ftrace_call" before "ftrace_graph_caller", which may destroy $12(t0). (Thanks to David for providing that -mcount-ra-address and giving the idea of KBUILD_MCOUNT_RA_ADDRESS, both of them have made the whole thing more beautiful!) Signed-off-by: Wu Zhangjin Cc: Steven Rostedt Cc: Nicholas Mc Guire Cc: zhangfx@lemote.com Cc: Wu Zhangjin Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/681/ Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 7 +++++++ arch/mips/kernel/ftrace.c | 24 +++++++++++++++++------- arch/mips/kernel/mcount.S | 14 ++++++++++++++ 3 files changed, 38 insertions(+), 7 deletions(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 3725ee923d05..d2c39fdcdfeb 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -51,6 +51,13 @@ endif ifndef CONFIG_FUNCTION_TRACER cflags-y := -ffunction-sections endif +ifdef CONFIG_FUNCTION_GRAPH_TRACER + ifndef KBUILD_MCOUNT_RA_ADDRESS + ifeq ($(call cc-option-yn,-mmcount-ra-address), y) + cflags-y += -mmcount-ra-address -DKBUILD_MCOUNT_RA_ADDRESS + endif + endif +endif cflags-y += $(call cc-option, -mno-check-zero-division) ifdef CONFIG_32BIT diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index e363fc69aabd..68b067040d8b 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -148,6 +148,7 @@ int ftrace_disable_ftrace_graph_caller(void) #endif /* !CONFIG_DYNAMIC_FTRACE */ +#ifndef KBUILD_MCOUNT_RA_ADDRESS #define S_RA_SP (0xafbf << 16) /* s{d,w} ra, offset(sp) */ #define S_R_SP (0xafb0 << 16) /* s{d,w} R, offset(sp) */ #define OFFSET_MASK 0xffff /* stack offset range: 0 ~ PT_SIZE */ @@ -201,6 +202,8 @@ unsigned long ftrace_get_parent_addr(unsigned long self_addr, return 0; } +#endif + /* * Hook the return address and push it in the stack of return addrs * in current thread info. @@ -218,19 +221,26 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, return; /* "parent" is the stack address saved the return address of the caller - * of _mcount, for a leaf function not save the return address in the - * stack address, so, we "emulate" one in _mcount's stack space, and - * hijack it directly, but for a non-leaf function, it will save the - * return address to the its stack space, so, we can not hijack the - * "parent" directly, but need to find the real stack address, + * of _mcount. + * + * if the gcc < 4.5, a leaf function does not save the return address + * in the stack address, so, we "emulate" one in _mcount's stack space, + * and hijack it directly, but for a non-leaf function, it save the + * return address to the its own stack space, we can not hijack it + * directly, but need to find the real stack address, * ftrace_get_parent_addr() does it! + * + * if gcc>= 4.5, with the new -mmcount-ra-address option, for a + * non-leaf function, the location of the return address will be saved + * to $12 for us, and for a leaf function, only put a zero into $12. we + * do it in ftrace_graph_caller of mcount.S. */ /* old = *parent; */ safe_load_stack(old, parent, faulted); if (unlikely(faulted)) goto out; - +#ifndef KBUILD_MCOUNT_RA_ADDRESS parent = (unsigned long *)ftrace_get_parent_addr(self_addr, old, (unsigned long)parent, fp); @@ -238,7 +248,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, * ra, stop function graph tracer and return */ if (parent == 0) goto out; - +#endif /* *parent = return_hooker; */ safe_store_stack(return_hooker, parent, faulted); if (unlikely(faulted)) diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S index 522e91c688fc..0a9cfdb271dd 100644 --- a/arch/mips/kernel/mcount.S +++ b/arch/mips/kernel/mcount.S @@ -70,6 +70,9 @@ _mcount: nop MCOUNT_SAVE_REGS +#ifdef KBUILD_MCOUNT_RA_ADDRESS + PTR_S t0, PT_R12(sp) /* t0 saved the location of the return address(at) by -mmcount-ra-address */ +#endif move a0, ra /* arg1: next ip, selfaddr */ .globl ftrace_call @@ -133,11 +136,22 @@ ftrace_stub: NESTED(ftrace_graph_caller, PT_SIZE, ra) #ifdef CONFIG_DYNAMIC_FTRACE PTR_L a1, PT_R31(sp) /* load the original ra from the stack */ +#ifdef KBUILD_MCOUNT_RA_ADDRESS + PTR_L t0, PT_R12(sp) /* load the original t0 from the stack */ +#endif #else MCOUNT_SAVE_REGS move a1, ra /* arg2: next ip, selfaddr */ #endif + +#ifdef KBUILD_MCOUNT_RA_ADDRESS + bnez t0, 1f /* non-leaf func: t0 saved the location of the return address */ + nop + PTR_LA t0, PT_R1(sp) /* leaf func: get the location of at(old ra) from our own stack */ +1: move a0, t0 /* arg1: the location of the return address */ +#else PTR_LA a0, PT_R1(sp) /* arg1: &AT -> a0 */ +#endif jal prepare_ftrace_return #ifdef CONFIG_FRAME_POINTER move a2, fp /* arg3: frame pointer */ -- GitLab From 599a89459f316499446fdb5c817a0a4835681bae Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Mon, 23 Nov 2009 13:53:37 +0200 Subject: [PATCH 241/618] MIPS: Move several variables from .bss to .init.data Several static uninitialized variables are used in the scope of __init functions but are themselves not marked as __initdata. This patch is to put those variables to where they belong and to reduce the memory footprint a little bit. Also, a couple of lines with spaces instead of tabs were fixed. Signed-off-by: Dmitri Vorobiev Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/698/ Acked-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/ar7/platform.c | 2 +- arch/mips/sgi-ip22/ip22-eisa.c | 4 ++-- arch/mips/sgi-ip22/ip22-setup.c | 2 +- arch/mips/sgi-ip32/ip32-setup.c | 2 +- arch/mips/sni/setup.c | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 835f3f0319ca..85169c08d8dc 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -505,7 +505,7 @@ static int __init ar7_register_devices(void) int res; u32 *bootcr, val; #ifdef CONFIG_SERIAL_8250 - static struct uart_port uart_port[2]; + static struct uart_port uart_port[2] __initdata; memset(uart_port, 0, sizeof(struct uart_port) * 2); diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c index 1617241d2737..da44ccb20829 100644 --- a/arch/mips/sgi-ip22/ip22-eisa.c +++ b/arch/mips/sgi-ip22/ip22-eisa.c @@ -50,9 +50,9 @@ static char __init *decode_eisa_sig(unsigned long addr) { - static char sig_str[EISA_SIG_LEN]; + static char sig_str[EISA_SIG_LEN] __initdata; u8 sig[4]; - u16 rev; + u16 rev; int i; for (i = 0; i < 4; i++) { diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c index b9a931358e23..5deeb68b6c9c 100644 --- a/arch/mips/sgi-ip22/ip22-setup.c +++ b/arch/mips/sgi-ip22/ip22-setup.c @@ -67,7 +67,7 @@ void __init plat_mem_setup(void) cserial = ArcGetEnvironmentVariable("ConsoleOut"); if ((ctype && *ctype == 'd') || (cserial && *cserial == 's')) { - static char options[8]; + static char options[8] __initdata; char *baud = ArcGetEnvironmentVariable("dbaud"); if (baud) strcpy(options, baud); diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c index c5a5d4a31b4b..3abd1465ec02 100644 --- a/arch/mips/sgi-ip32/ip32-setup.c +++ b/arch/mips/sgi-ip32/ip32-setup.c @@ -90,7 +90,7 @@ void __init plat_mem_setup(void) { char* con = ArcGetEnvironmentVariable("console"); if (con && *con == 'd') { - static char options[8]; + static char options[8] __initdata; char *baud = ArcGetEnvironmentVariable("dbaud"); if (baud) strcpy(options, baud); diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index a49272ce7ef5..d16b462154c3 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -60,7 +60,7 @@ static void __init sni_console_setup(void) char *cdev; char *baud; int port; - static char options[8]; + static char options[8] __initdata; cdev = prom_getenv("console_dev"); if (strncmp(cdev, "tty", 3) == 0) { -- GitLab From ec614d80b58677de30b876a16fdd3fde85bebdc1 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Sat, 21 Nov 2009 19:05:23 +0800 Subject: [PATCH 242/618] MIPS: Yeeloong 2F: Add basic EC operations YeeLoong2F has a KB3310b embedded controller. Add basic operations for future related drivers and board support. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/684/ Signed-off-by: Ralf Baechle --- arch/mips/loongson/lemote-2f/Makefile | 2 +- arch/mips/loongson/lemote-2f/ec_kb3310b.c | 130 +++++++++++++++ arch/mips/loongson/lemote-2f/ec_kb3310b.h | 188 ++++++++++++++++++++++ 3 files changed, 319 insertions(+), 1 deletion(-) create mode 100644 arch/mips/loongson/lemote-2f/ec_kb3310b.c create mode 100644 arch/mips/loongson/lemote-2f/ec_kb3310b.h diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile index 5add7b2ead1c..4d84b27dc41b 100644 --- a/arch/mips/loongson/lemote-2f/Makefile +++ b/arch/mips/loongson/lemote-2f/Makefile @@ -2,7 +2,7 @@ # Makefile for lemote loongson2f family machines # -obj-y += irq.o reset.o +obj-y += irq.o reset.o ec_kb3310b.o # # Suspend Support diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.c b/arch/mips/loongson/lemote-2f/ec_kb3310b.c new file mode 100644 index 000000000000..4d84111a2cd4 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.c @@ -0,0 +1,130 @@ +/* + * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook + * + * Copyright (C) 2008 Lemote Inc. + * Author: liujl , 2008-04-20 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include + +#include "ec_kb3310b.h" + +static DEFINE_SPINLOCK(index_access_lock); +static DEFINE_SPINLOCK(port_access_lock); + +unsigned char ec_read(unsigned short addr) +{ + unsigned char value; + unsigned long flags; + + spin_lock_irqsave(&index_access_lock, flags); + outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); + outb((addr & 0x00ff), EC_IO_PORT_LOW); + value = inb(EC_IO_PORT_DATA); + spin_unlock_irqrestore(&index_access_lock, flags); + + return value; +} +EXPORT_SYMBOL_GPL(ec_read); + +void ec_write(unsigned short addr, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&index_access_lock, flags); + outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); + outb((addr & 0x00ff), EC_IO_PORT_LOW); + outb(val, EC_IO_PORT_DATA); + /* flush the write action */ + inb(EC_IO_PORT_DATA); + spin_unlock_irqrestore(&index_access_lock, flags); + + return; +} +EXPORT_SYMBOL_GPL(ec_write); + +/* + * This function is used for EC command writes and corresponding status queries. + */ +int ec_query_seq(unsigned char cmd) +{ + int timeout; + unsigned char status; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&port_access_lock, flags); + + /* make chip goto reset mode */ + udelay(EC_REG_DELAY); + outb(cmd, EC_CMD_PORT); + udelay(EC_REG_DELAY); + + /* check if the command is received by ec */ + timeout = EC_CMD_TIMEOUT; + status = inb(EC_STS_PORT); + while (timeout-- && (status & (1 << 1))) { + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + } + + if (timeout <= 0) { + printk(KERN_ERR "%s: deadable error : timeout...\n", __func__); + ret = -EINVAL; + } else + printk(KERN_INFO + "(%x/%d)ec issued command %d status : 0x%x\n", + timeout, EC_CMD_TIMEOUT - timeout, cmd, status); + + spin_unlock_irqrestore(&port_access_lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(ec_query_seq); + +/* + * Send query command to EC to get the proper event number + */ +int ec_query_event_num(void) +{ + return ec_query_seq(CMD_GET_EVENT_NUM); +} +EXPORT_SYMBOL(ec_query_event_num); + +/* + * Get event number from EC + * + * NOTE: This routine must follow the query_event_num function in the + * interrupt. + */ +int ec_get_event_num(void) +{ + int timeout = 100; + unsigned char value; + unsigned char status; + + udelay(EC_REG_DELAY); + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + while (timeout-- && !(status & (1 << 0))) { + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + } + if (timeout <= 0) { + pr_info("%s: get event number timeout.\n", __func__); + + return -EINVAL; + } + value = inb(EC_DAT_PORT); + udelay(EC_REG_DELAY); + + return value; +} +EXPORT_SYMBOL(ec_get_event_num); diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/arch/mips/loongson/lemote-2f/ec_kb3310b.h new file mode 100644 index 000000000000..1595a21b315b --- /dev/null +++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.h @@ -0,0 +1,188 @@ +/* + * KB3310B Embedded Controller + * + * Copyright (C) 2008 Lemote Inc. + * Author: liujl , 2008-03-14 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _EC_KB3310B_H +#define _EC_KB3310B_H + +extern unsigned char ec_read(unsigned short addr); +extern void ec_write(unsigned short addr, unsigned char val); +extern int ec_query_seq(unsigned char cmd); +extern int ec_query_event_num(void); +extern int ec_get_event_num(void); + +typedef int (*sci_handler) (int status); +extern sci_handler yeeloong_report_lid_status; + +#define SCI_IRQ_NUM 0x0A + +/* + * The following registers are determined by the EC index configuration. + * 1, fill the PORT_HIGH as EC register high part. + * 2, fill the PORT_LOW as EC register low part. + * 3, fill the PORT_DATA as EC register write data or get the data from it. + */ +#define EC_IO_PORT_HIGH 0x0381 +#define EC_IO_PORT_LOW 0x0382 +#define EC_IO_PORT_DATA 0x0383 + +/* + * EC delay time is 500us for register and status access + */ +#define EC_REG_DELAY 500 /* unit : us */ +#define EC_CMD_TIMEOUT 0x1000 + +/* + * EC access port for SCI communication + */ +#define EC_CMD_PORT 0x66 +#define EC_STS_PORT 0x66 +#define EC_DAT_PORT 0x62 +#define CMD_INIT_IDLE_MODE 0xdd +#define CMD_EXIT_IDLE_MODE 0xdf +#define CMD_INIT_RESET_MODE 0xd8 +#define CMD_REBOOT_SYSTEM 0x8c +#define CMD_GET_EVENT_NUM 0x84 +#define CMD_PROGRAM_PIECE 0xda + +/* temperature & fan registers */ +#define REG_TEMPERATURE_VALUE 0xF458 +#define REG_FAN_AUTO_MAN_SWITCH 0xF459 +#define BIT_FAN_AUTO 0 +#define BIT_FAN_MANUAL 1 +#define REG_FAN_CONTROL 0xF4D2 +#define BIT_FAN_CONTROL_ON (1 << 0) +#define BIT_FAN_CONTROL_OFF (0 << 0) +#define REG_FAN_STATUS 0xF4DA +#define BIT_FAN_STATUS_ON (1 << 0) +#define BIT_FAN_STATUS_OFF (0 << 0) +#define REG_FAN_SPEED_HIGH 0xFE22 +#define REG_FAN_SPEED_LOW 0xFE23 +#define REG_FAN_SPEED_LEVEL 0xF4CC +/* fan speed divider */ +#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ + +/* battery registers */ +#define REG_BAT_DESIGN_CAP_HIGH 0xF77D +#define REG_BAT_DESIGN_CAP_LOW 0xF77E +#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 +#define REG_BAT_FULLCHG_CAP_LOW 0xF781 +#define REG_BAT_DESIGN_VOL_HIGH 0xF782 +#define REG_BAT_DESIGN_VOL_LOW 0xF783 +#define REG_BAT_CURRENT_HIGH 0xF784 +#define REG_BAT_CURRENT_LOW 0xF785 +#define REG_BAT_VOLTAGE_HIGH 0xF786 +#define REG_BAT_VOLTAGE_LOW 0xF787 +#define REG_BAT_TEMPERATURE_HIGH 0xF788 +#define REG_BAT_TEMPERATURE_LOW 0xF789 +#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 +#define REG_BAT_RELATIVE_CAP_LOW 0xF493 +#define REG_BAT_VENDOR 0xF4C4 +#define FLAG_BAT_VENDOR_SANYO 0x01 +#define FLAG_BAT_VENDOR_SIMPLO 0x02 +#define REG_BAT_CELL_COUNT 0xF4C6 +#define FLAG_BAT_CELL_3S1P 0x03 +#define FLAG_BAT_CELL_3S2P 0x06 +#define REG_BAT_CHARGE 0xF4A2 +#define FLAG_BAT_CHARGE_DISCHARGE 0x01 +#define FLAG_BAT_CHARGE_CHARGE 0x02 +#define FLAG_BAT_CHARGE_ACPOWER 0x00 +#define REG_BAT_STATUS 0xF4B0 +#define BIT_BAT_STATUS_LOW (1 << 5) +#define BIT_BAT_STATUS_DESTROY (1 << 2) +#define BIT_BAT_STATUS_FULL (1 << 1) +#define BIT_BAT_STATUS_IN (1 << 0) +#define REG_BAT_CHARGE_STATUS 0xF4B1 +#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) +#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) +#define REG_BAT_STATE 0xF482 +#define BIT_BAT_STATE_CHARGING (1 << 1) +#define BIT_BAT_STATE_DISCHARGING (1 << 0) +#define REG_BAT_POWER 0xF440 +#define BIT_BAT_POWER_S3 (1 << 2) +#define BIT_BAT_POWER_ON (1 << 1) +#define BIT_BAT_POWER_ACIN (1 << 0) + +/* other registers */ +/* Audio: rd/wr */ +#define REG_AUDIO_VOLUME 0xF46C +#define REG_AUDIO_MUTE 0xF4E7 +#define REG_AUDIO_BEEP 0xF4D0 +/* USB port power or not: rd/wr */ +#define REG_USB0_FLAG 0xF461 +#define REG_USB1_FLAG 0xF462 +#define REG_USB2_FLAG 0xF463 +#define BIT_USB_FLAG_ON 1 +#define BIT_USB_FLAG_OFF 0 +/* LID */ +#define REG_LID_DETECT 0xF4BD +#define BIT_LID_DETECT_ON 1 +#define BIT_LID_DETECT_OFF 0 +/* CRT */ +#define REG_CRT_DETECT 0xF4AD +#define BIT_CRT_DETECT_PLUG 1 +#define BIT_CRT_DETECT_UNPLUG 0 +/* LCD backlight brightness adjust: 9 levels */ +#define REG_DISPLAY_BRIGHTNESS 0xF4F5 +/* Black screen Status */ +#define BIT_DISPLAY_LCD_ON 1 +#define BIT_DISPLAY_LCD_OFF 0 +/* LCD backlight control: off/restore */ +#define REG_BACKLIGHT_CTRL 0xF7BD +#define BIT_BACKLIGHT_ON 1 +#define BIT_BACKLIGHT_OFF 0 +/* Reset the machine auto-clear: rd/wr */ +#define REG_RESET 0xF4EC +#define BIT_RESET_ON 1 +/* Light the led: rd/wr */ +#define REG_LED 0xF4C8 +#define BIT_LED_RED_POWER (1 << 0) +#define BIT_LED_ORANGE_POWER (1 << 1) +#define BIT_LED_GREEN_CHARGE (1 << 2) +#define BIT_LED_RED_CHARGE (1 << 3) +#define BIT_LED_NUMLOCK (1 << 4) +/* Test led mode, all led on/off */ +#define REG_LED_TEST 0xF4C2 +#define BIT_LED_TEST_IN 1 +#define BIT_LED_TEST_OUT 0 +/* Camera on/off */ +#define REG_CAMERA_STATUS 0xF46A +#define BIT_CAMERA_STATUS_ON 1 +#define BIT_CAMERA_STATUS_OFF 0 +#define REG_CAMERA_CONTROL 0xF7B7 +#define BIT_CAMERA_CONTROL_OFF 0 +#define BIT_CAMERA_CONTROL_ON 1 +/* Wlan Status */ +#define REG_WLAN 0xF4FA +#define BIT_WLAN_ON 1 +#define BIT_WLAN_OFF 0 +#define REG_DISPLAY_LCD 0xF79F + +/* SCI Event Number from EC */ +enum { + EVENT_LID = 0x23, /* LID open/close */ + EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */ + EVENT_SLEEP, /* Fn+F1 for entering sleep mode */ + EVENT_OVERTEMP, /* Over-temperature happened */ + EVENT_CRT_DETECT, /* CRT is connected */ + EVENT_CAMERA, /* Camera on/off */ + EVENT_USB_OC2, /* USB2 Over Current occurred */ + EVENT_USB_OC0, /* USB0 Over Current occurred */ + EVENT_BLACK_SCREEN, /* Turn on/off backlight */ + EVENT_AUDIO_MUTE, /* Mute on/off */ + EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */ + EVENT_AC_BAT, /* AC & Battery relative issue */ + EVENT_AUDIO_VOLUME, /* Volume adjust */ + EVENT_WLAN, /* Wlan on/off */ + EVENT_END +}; + +#endif /* !_EC_KB3310B_H */ -- GitLab From cb1ed9e117098269de3c0dfff816dff453dd4b59 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Sat, 21 Nov 2009 19:05:24 +0800 Subject: [PATCH 243/618] MIPS: Yeeloong 2F: Add LID open event as the wakeup event Yeeloong 2F netbook has an KB3310B embedded controller to manage the LID action. When the LID is closed or opened a SCI interrupt is sent out and the corresponding event is saved to an EC register for later query. Allow the LID open interrupt to wake the processor from wait mode if it is in the suspend mode. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/685/ Signed-off-by: Ralf Baechle --- .../mips/include/asm/mach-loongson/loongson.h | 1 + arch/mips/loongson/lemote-2f/irq.c | 4 +- arch/mips/loongson/lemote-2f/pm.c | 71 ++++++++++++++++++- 3 files changed, 72 insertions(+), 4 deletions(-) diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index a7fa66e85988..06c28f387116 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -41,6 +41,7 @@ extern void __init bonito_irq_init(void); extern void __init set_irq_trigger_mode(void); extern void __init mach_init_irq(void); extern void mach_irq_dispatch(unsigned int pending); +extern int mach_i8259_irq(void); /* We need this in some places... */ #define delay() ({ \ diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c index 50e7bb6012b7..77d32f9cf31e 100644 --- a/arch/mips/loongson/lemote-2f/irq.c +++ b/arch/mips/loongson/lemote-2f/irq.c @@ -9,6 +9,7 @@ */ #include +#include #include #include @@ -30,7 +31,7 @@ * The generic i8259_irq() make the kernel hang on booting. Since we cannot * get the irq via the IRR directly, we access the ISR instead. */ -static inline int mach_i8259_irq(void) +int mach_i8259_irq(void) { int irq, isr; @@ -60,6 +61,7 @@ static inline int mach_i8259_irq(void) return irq; } +EXPORT_SYMBOL(mach_i8259_irq); static void i8259_irqdispatch(void) { diff --git a/arch/mips/loongson/lemote-2f/pm.c b/arch/mips/loongson/lemote-2f/pm.c index 8090d0514221..81c06410aa76 100644 --- a/arch/mips/loongson/lemote-2f/pm.c +++ b/arch/mips/loongson/lemote-2f/pm.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -21,6 +22,8 @@ #include +#include "ec_kb3310b.h" + #define I8042_KBD_IRQ 1 #define I8042_CTR_KBDINT 0x01 #define I8042_CTR_KBDDIS 0x10 @@ -49,9 +52,6 @@ static int i8042_enable_kbd_port(void) return 0; } -/* - * The i8042 is connnected to i8259A - */ void setup_wakeup_events(void) { int irq_mask; @@ -65,9 +65,74 @@ void setup_wakeup_events(void) /* enable keyboard port */ i8042_enable_kbd_port(); + + /* Wakeup CPU via SCI lid open event */ + outb(irq_mask & ~(1 << PIC_CASCADE_IR), PIC_MASTER_IMR); + inb(PIC_MASTER_IMR); + outb(0xff & ~(1 << (SCI_IRQ_NUM - 8)), PIC_SLAVE_IMR); + inb(PIC_SLAVE_IMR); + break; default: break; } } + +static struct delayed_work lid_task; +static int initialized; +/* yeeloong_report_lid_status will be implemented in yeeloong_laptop.c */ +sci_handler yeeloong_report_lid_status; +EXPORT_SYMBOL(yeeloong_report_lid_status); +static void yeeloong_lid_update_task(struct work_struct *work) +{ + if (yeeloong_report_lid_status) + yeeloong_report_lid_status(BIT_LID_DETECT_ON); +} + +int wakeup_loongson(void) +{ + int irq; + + /* query the interrupt number */ + irq = mach_i8259_irq(); + if (irq < 0) + return 0; + + printk(KERN_INFO "%s: irq = %d\n", __func__, irq); + + if (irq == I8042_KBD_IRQ) + return 1; + else if (irq == SCI_IRQ_NUM) { + int ret, sci_event; + /* query the event number */ + ret = ec_query_seq(CMD_GET_EVENT_NUM); + if (ret < 0) + return 0; + sci_event = ec_get_event_num(); + if (sci_event < 0) + return 0; + if (sci_event == EVENT_LID) { + int lid_status; + /* check the LID status */ + lid_status = ec_read(REG_LID_DETECT); + /* wakeup cpu when people open the LID */ + if (lid_status == BIT_LID_DETECT_ON) { + /* If we call it directly here, the WARNING + * will be sent out by getnstimeofday + * via "WARN_ON(timekeeping_suspended);" + * because we can not schedule in suspend mode. + */ + if (initialized == 0) { + INIT_DELAYED_WORK(&lid_task, + yeeloong_lid_update_task); + initialized = 1; + } + schedule_delayed_work(&lid_task, 1); + return 1; + } + } + } + + return 0; +} -- GitLab From 70ab711df44ada438973ceba0213121afeb8e8b3 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Sat, 21 Nov 2009 19:05:25 +0800 Subject: [PATCH 244/618] MIPS: Yeeloong 2F: Cleanup reset logic using the new ec_write function Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/683/ Signed-off-by: Ralf Baechle --- arch/mips/loongson/lemote-2f/reset.c | 21 ++------------------- 1 file changed, 2 insertions(+), 19 deletions(-) diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c index 44bb984d58dd..51d1a60d5349 100644 --- a/arch/mips/loongson/lemote-2f/reset.c +++ b/arch/mips/loongson/lemote-2f/reset.c @@ -20,6 +20,7 @@ #include #include +#include "ec_kb3310b.h" static void reset_cpu(void) { @@ -75,30 +76,12 @@ static void fl2f_shutdown(void) /* reset support for yeeloong2f and mengloong2f notebook */ -/* - * The following registers are determined by the EC index configuration. - * 1. fill the PORT_HIGH as EC register high part. - * 2. fill the PORT_LOW as EC register low part. - * 3. fill the PORT_DATA as EC register write data or get the data from it. - */ - -#define EC_IO_PORT_HIGH 0x0381 -#define EC_IO_PORT_LOW 0x0382 -#define EC_IO_PORT_DATA 0x0383 -#define REG_RESET_HIGH 0xF4 /* reset the machine auto-clear : rd/wr */ -#define REG_RESET_LOW 0xEC -#define BIT_RESET_ON (1 << 0) - void ml2f_reboot(void) { reset_cpu(); /* sending an reset signal to EC(embedded controller) */ - outb(REG_RESET_HIGH, EC_IO_PORT_HIGH); - outb(REG_RESET_LOW, EC_IO_PORT_LOW); - mmiowb(); - outb(BIT_RESET_ON, EC_IO_PORT_DATA); - mmiowb(); + ec_write(REG_RESET, BIT_RESET_ON); } #define yl2f89_reboot ml2f_reboot -- GitLab From 4dd92e15b316d1a782772f16074571a70ceb9184 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Dec 2009 01:57:30 +0000 Subject: [PATCH 245/618] MIPS: Move EARLY_PRINTK to Kconfig.debug Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 14 -------------- arch/mips/Kconfig.debug | 14 ++++++++++++++ 2 files changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 2906ae59af49..0be245d28a1d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -837,20 +837,6 @@ config DMA_NONCOHERENT config DMA_NEED_PCI_MAP_STATE bool -config EARLY_PRINTK - bool "Early printk" if EMBEDDED && DEBUG_KERNEL - depends on SYS_HAS_EARLY_PRINTK - default y - help - This option enables special console drivers which allow the kernel - to print messages very early in the bootup process. - - This is useful for kernel debugging when your machine crashes very - early before the console code is initialized. For normal operation, - it is not recommended because it looks ugly on some machines and - doesn't cooperate with an X server. You should normally say N here, - unless you want to debug such a crash. - config SYS_HAS_EARLY_PRINTK bool diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 364ca8938807..23817bc7a26a 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -6,6 +6,20 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" +config EARLY_PRINTK + bool "Early printk" if EMBEDDED + depends on SYS_HAS_EARLY_PRINTK + default y + help + This option enables special console drivers which allow the kernel + to print messages very early in the bootup process. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation, + it is not recommended because it looks ugly on some machines and + doesn't cooperate with an X server. You should normally say N here, + unless you want to debug such a crash. + config CMDLINE string "Default kernel command string" default "" -- GitLab From 69f3a7de1f1ec935924b1b13f83812f8b30e92ce Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 24 Nov 2009 01:24:58 +0000 Subject: [PATCH 246/618] MIPS: Modularize COP2 handling Away with the daemons of ifdef; get ready for future COP2 users. Signed-off-by: Ralf Baechle Patchwork: http://patchwork.linux-mips.org/patch/708/ --- arch/mips/cavium-octeon/Makefile | 2 +- arch/mips/cavium-octeon/cpu.c | 52 +++++++++++++++++++++++ arch/mips/include/asm/cop2.h | 23 ++++++++++ arch/mips/include/asm/octeon/octeon.h | 1 + arch/mips/kernel/traps.c | 60 ++++++++++++++++++++------- arch/mips/kernel/unaligned.c | 25 +++++++---- 6 files changed, 140 insertions(+), 23 deletions(-) create mode 100644 arch/mips/cavium-octeon/cpu.c create mode 100644 arch/mips/include/asm/cop2.h diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile index 139436280520..3e9876317e61 100644 --- a/arch/mips/cavium-octeon/Makefile +++ b/arch/mips/cavium-octeon/Makefile @@ -9,7 +9,7 @@ # Copyright (C) 2005-2009 Cavium Networks # -obj-y := setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o +obj-y := cpu.o setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o obj-y += dma-octeon.o flash_setup.o obj-y += octeon-memcpy.o diff --git a/arch/mips/cavium-octeon/cpu.c b/arch/mips/cavium-octeon/cpu.c new file mode 100644 index 000000000000..b6df5387e855 --- /dev/null +++ b/arch/mips/cavium-octeon/cpu.c @@ -0,0 +1,52 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static int cnmips_cu2_call(struct notifier_block *nfb, unsigned long action, + void *data) +{ + unsigned long flags; + unsigned int status; + + switch (action) { + case CU2_EXCEPTION: + prefetch(¤t->thread.cp2); + local_irq_save(flags); + KSTK_STATUS(current) |= ST0_CU2; + status = read_c0_status(); + write_c0_status(status | ST0_CU2); + octeon_cop2_restore(&(current->thread.cp2)); + write_c0_status(status & ~ST0_CU2); + local_irq_restore(flags); + + return NOTIFY_BAD; /* Don't call default notifier */ + } + + return NOTIFY_OK; /* Let default notifier send signals */ +} + +static struct notifier_block cnmips_cu2_notifier = { + .notifier_call = cnmips_cu2_call, +}; + +static int cnmips_cu2_setup(void) +{ + return register_cu2_notifier(&cnmips_cu2_notifier); +} +early_initcall(cnmips_cu2_setup); diff --git a/arch/mips/include/asm/cop2.h b/arch/mips/include/asm/cop2.h new file mode 100644 index 000000000000..6b04c98b7fad --- /dev/null +++ b/arch/mips/include/asm/cop2.h @@ -0,0 +1,23 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle + */ +#ifndef __ASM_COP2_H +#define __ASM_COP2_H + +enum cu2_ops { + CU2_EXCEPTION, + CU2_LWC2_OP, + CU2_LDC2_OP, + CU2_SWC2_OP, + CU2_SDC2_OP, +}; + +extern int register_cu2_notifier(struct notifier_block *nb); +extern int cu2_notifier_call_chain(unsigned long val, void *v); + +#endif /* __ASM_COP2_H */ diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h index cac9b1a206fc..4d0a8c61fc3e 100644 --- a/arch/mips/include/asm/octeon/octeon.h +++ b/arch/mips/include/asm/octeon/octeon.h @@ -47,6 +47,7 @@ struct octeon_cop2_state; extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *state); extern void octeon_crypto_disable(struct octeon_cop2_state *state, unsigned long flags); +extern asmlinkage void octeon_cop2_restore(struct octeon_cop2_state *task); extern void octeon_init_cvmcount(void); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 0a18b4c62afb..9fe21fb65305 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -25,10 +25,12 @@ #include #include #include +#include #include #include #include +#include #include #include #include @@ -79,10 +81,6 @@ extern asmlinkage void handle_reserved(void); extern int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, int has_fpu); -#ifdef CONFIG_CPU_CAVIUM_OCTEON -extern asmlinkage void octeon_cop2_restore(struct octeon_cop2_state *task); -#endif - void (*board_be_init)(void); int (*board_be_handler)(struct pt_regs *regs, int is_fixup); void (*board_nmi_handler_setup)(void); @@ -857,6 +855,44 @@ static void mt_ase_fp_affinity(void) #endif /* CONFIG_MIPS_MT_FPAFF */ } +/* + * No lock; only written during early bootup by CPU 0. + */ +static RAW_NOTIFIER_HEAD(cu2_chain); + +int __ref register_cu2_notifier(struct notifier_block *nb) +{ + return raw_notifier_chain_register(&cu2_chain, nb); +} + +int cu2_notifier_call_chain(unsigned long val, void *v) +{ + return raw_notifier_call_chain(&cu2_chain, val, v); +} + +static int default_cu2_call(struct notifier_block *nfb, unsigned long action, + void *data) +{ + struct pt_regs *regs = data; + + switch (action) { + default: + die_if_kernel("Unhandled kernel unaligned access or invalid " + "instruction", regs); + /* Fall through */ + + case CU2_EXCEPTION: + force_sig(SIGILL, current); + } + + return NOTIFY_OK; +} + +static struct notifier_block default_cu2_notifier = { + .notifier_call = default_cu2_call, + .priority = 0x80000000, /* Run last */ +}; + asmlinkage void do_cpu(struct pt_regs *regs) { unsigned int __user *epc; @@ -920,17 +956,9 @@ asmlinkage void do_cpu(struct pt_regs *regs) return; case 2: -#ifdef CONFIG_CPU_CAVIUM_OCTEON - prefetch(¤t->thread.cp2); - local_irq_save(flags); - KSTK_STATUS(current) |= ST0_CU2; - status = read_c0_status(); - write_c0_status(status | ST0_CU2); - octeon_cop2_restore(&(current->thread.cp2)); - write_c0_status(status & ~ST0_CU2); - local_irq_restore(flags); - return; -#endif + raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs); + break; + case 3: break; } @@ -1760,4 +1788,6 @@ void __init trap_init(void) flush_tlb_handlers(); sort_extable(__start___dbe_table, __stop___dbe_table); + + register_cu2_notifier(&default_cu2_notifier); } diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index 67bd626942ab..69b039ca8d83 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -81,6 +81,7 @@ #include #include #include +#include #include #include #include @@ -451,17 +452,27 @@ static void emulate_load_store_insn(struct pt_regs *regs, */ goto sigbus; + /* + * COP2 is available to implementor for application specific use. + * It's up to applications to register a notifier chain and do + * whatever they have to do, including possible sending of signals. + */ case lwc2_op: + cu2_notifier_call_chain(CU2_LWC2_OP, regs); + break; + case ldc2_op: + cu2_notifier_call_chain(CU2_LDC2_OP, regs); + break; + case swc2_op: + cu2_notifier_call_chain(CU2_SWC2_OP, regs); + break; + case sdc2_op: - /* - * These are the coprocessor 2 load/stores. The current - * implementations don't use cp2 and cp2 should always be - * disabled in c0_status. So send SIGILL. - * (No longer true: The Sony Praystation uses cp2 for - * 3D matrix operations. Dunno if that thingy has a MMU ...) - */ + cu2_notifier_call_chain(CU2_SDC2_OP, regs); + break; + default: /* * Pheeee... We encountered an yet unknown instruction or -- GitLab From 137f6f3e284e8215a940cf20dbf2aef449fe5a60 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 24 Nov 2009 19:35:41 +0000 Subject: [PATCH 247/618] MIPS: Cleanup signal code initialization Signed-off-by: Ralf Baechle Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/709/ --- arch/mips/include/asm/fpu.h | 8 ---- arch/mips/kernel/signal.c | 46 ++++++++++++++++++++++ arch/mips/kernel/signal32.c | 24 ++++++++++++ arch/mips/kernel/traps.c | 76 ------------------------------------- 4 files changed, 70 insertions(+), 84 deletions(-) diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h index 8a3ef247659a..7fcef8ef3fab 100644 --- a/arch/mips/include/asm/fpu.h +++ b/arch/mips/include/asm/fpu.h @@ -28,15 +28,7 @@ struct sigcontext; struct sigcontext32; -extern asmlinkage int (*save_fp_context)(struct sigcontext __user *sc); -extern asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc); - -extern asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc); -extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc); - extern void fpu_emulator_init_fpu(void); -extern int fpu_emulator_save_context(struct sigcontext __user *sc); -extern int fpu_emulator_restore_context(struct sigcontext __user *sc); extern void _init_fpu(void); extern void _save_fp(struct task_struct *); extern void _restore_fp(struct task_struct *); diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 6254041b942f..d0c68b5d717b 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -35,6 +35,15 @@ #include "signal-common.h" +static int (*save_fp_context)(struct sigcontext __user *sc); +static int (*restore_fp_context)(struct sigcontext __user *sc); + +extern asmlinkage int _save_fp_context(struct sigcontext __user *sc); +extern asmlinkage int _restore_fp_context(struct sigcontext __user *sc); + +extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc); +extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc); + /* * Horribly complicated - with the bloody RM9000 workarounds enabled * the signal trampolines is moving to the end of the structure so we can @@ -709,3 +718,40 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused, key_replace_session_keyring(); } } + +#ifdef CONFIG_SMP +static int smp_save_fp_context(struct sigcontext __user *sc) +{ + return raw_cpu_has_fpu + ? _save_fp_context(sc) + : fpu_emulator_save_context(sc); +} + +static int smp_restore_fp_context(struct sigcontext __user *sc) +{ + return raw_cpu_has_fpu + ? _restore_fp_context(sc) + : fpu_emulator_restore_context(sc); +} +#endif + +static int signal_setup(void) +{ +#ifdef CONFIG_SMP + /* For now just do the cpu_has_fpu check when the functions are invoked */ + save_fp_context = smp_save_fp_context; + restore_fp_context = smp_restore_fp_context; +#else + if (cpu_has_fpu) { + save_fp_context = _save_fp_context; + restore_fp_context = _restore_fp_context; + } else { + save_fp_context = fpu_emulator_save_context; + restore_fp_context = fpu_emulator_restore_context; + } +#endif + + return 0; +} + +arch_initcall(signal_setup); diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 2e74075ac0ca..03abaf048f09 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -35,6 +35,15 @@ #include "signal-common.h" +static int (*save_fp_context32)(struct sigcontext32 __user *sc); +static int (*restore_fp_context32)(struct sigcontext32 __user *sc); + +extern asmlinkage int _save_fp_context32(struct sigcontext32 __user *sc); +extern asmlinkage int _restore_fp_context32(struct sigcontext32 __user *sc); + +extern asmlinkage int fpu_emulator_save_context32(struct sigcontext32 __user *sc); +extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 __user *sc); + /* * Including would give use the 64-bit syscall numbers ... */ @@ -828,3 +837,18 @@ SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid, info.si_code |= __SI_CHLD; return copy_siginfo_to_user32(uinfo, &info); } + +static int signal32_init(void) +{ + if (cpu_has_fpu) { + save_fp_context32 = _save_fp_context32; + restore_fp_context32 = _restore_fp_context32; + } else { + save_fp_context32 = fpu_emulator_save_context32; + restore_fp_context32 = fpu_emulator_restore_context32; + } + + return 0; +} + +arch_initcall(signal32_init); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 9fe21fb65305..308e43460864 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1395,77 +1395,6 @@ void *set_vi_handler(int n, vi_handler_t addr) return set_vi_srs_handler(n, addr, 0); } -/* - * This is used by native signal handling - */ -asmlinkage int (*save_fp_context)(struct sigcontext __user *sc); -asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc); - -extern asmlinkage int _save_fp_context(struct sigcontext __user *sc); -extern asmlinkage int _restore_fp_context(struct sigcontext __user *sc); - -extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc); -extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc); - -#ifdef CONFIG_SMP -static int smp_save_fp_context(struct sigcontext __user *sc) -{ - return raw_cpu_has_fpu - ? _save_fp_context(sc) - : fpu_emulator_save_context(sc); -} - -static int smp_restore_fp_context(struct sigcontext __user *sc) -{ - return raw_cpu_has_fpu - ? _restore_fp_context(sc) - : fpu_emulator_restore_context(sc); -} -#endif - -static inline void signal_init(void) -{ -#ifdef CONFIG_SMP - /* For now just do the cpu_has_fpu check when the functions are invoked */ - save_fp_context = smp_save_fp_context; - restore_fp_context = smp_restore_fp_context; -#else - if (cpu_has_fpu) { - save_fp_context = _save_fp_context; - restore_fp_context = _restore_fp_context; - } else { - save_fp_context = fpu_emulator_save_context; - restore_fp_context = fpu_emulator_restore_context; - } -#endif -} - -#ifdef CONFIG_MIPS32_COMPAT - -/* - * This is used by 32-bit signal stuff on the 64-bit kernel - */ -asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc); -asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc); - -extern asmlinkage int _save_fp_context32(struct sigcontext32 __user *sc); -extern asmlinkage int _restore_fp_context32(struct sigcontext32 __user *sc); - -extern asmlinkage int fpu_emulator_save_context32(struct sigcontext32 __user *sc); -extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 __user *sc); - -static inline void signal32_init(void) -{ - if (cpu_has_fpu) { - save_fp_context32 = _save_fp_context32; - restore_fp_context32 = _restore_fp_context32; - } else { - save_fp_context32 = fpu_emulator_save_context32; - restore_fp_context32 = fpu_emulator_restore_context32; - } -} -#endif - extern void cpu_cache_init(void); extern void tlb_init(void); extern void flush_tlb_handlers(void); @@ -1779,11 +1708,6 @@ void __init trap_init(void) else memcpy((void *)(ebase + 0x080), &except_vec3_generic, 0x80); - signal_init(); -#ifdef CONFIG_MIPS32_COMPAT - signal32_init(); -#endif - local_flush_icache_range(ebase, ebase + 0x400); flush_tlb_handlers(); -- GitLab From c0b4abdd529d8256acc4cf0094db385877f34ae6 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 27 Nov 2009 09:55:03 +0300 Subject: [PATCH 248/618] MIPS: Lasat: Convert to proc_fops / seq_file Signed-off-by: Alexey Dobriyan Cc: akpm@linux-foundation.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/725/ Signed-off-by: Ralf Baechle --- arch/mips/lasat/picvue_proc.c | 113 ++++++++++++++++++++-------------- 1 file changed, 68 insertions(+), 45 deletions(-) diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c index 0bb6037afba3..8e388da1926f 100644 --- a/arch/mips/lasat/picvue_proc.c +++ b/arch/mips/lasat/picvue_proc.c @@ -4,12 +4,14 @@ * Brian Murphy * */ +#include #include #include #include #include #include +#include #include #include @@ -38,12 +40,9 @@ static void pvc_display(unsigned long data) static DECLARE_TASKLET(pvc_display_tasklet, &pvc_display, 0); -static int pvc_proc_read_line(char *page, char **start, - off_t off, int count, - int *eof, void *data) +static int pvc_line_proc_show(struct seq_file *m, void *v) { - char *origpage = page; - int lineno = *(int *)data; + int lineno = *(int *)m->private; if (lineno < 0 || lineno > PVC_NLINES) { printk(KERN_WARNING "proc_read_line: invalid lineno %d\n", lineno); @@ -51,45 +50,66 @@ static int pvc_proc_read_line(char *page, char **start, } mutex_lock(&pvc_mutex); - page += sprintf(page, "%s\n", pvc_lines[lineno]); + seq_printf(m, "%s\n", pvc_lines[lineno]); mutex_unlock(&pvc_mutex); - return page - origpage; + return 0; } -static int pvc_proc_write_line(struct file *file, const char *buffer, - unsigned long count, void *data) +static int pvc_line_proc_open(struct inode *inode, struct file *file) { - int origcount = count; - int lineno = *(int *)data; + return single_open(file, pvc_line_proc_show, PDE(inode)->data); +} - if (lineno < 0 || lineno > PVC_NLINES) { - printk(KERN_WARNING "proc_write_line: invalid lineno %d\n", - lineno); - return origcount; - } +static ssize_t pvc_line_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) +{ + int lineno = *(int *)PDE(file->f_path.dentry->d_inode)->data; + char kbuf[PVC_LINELEN]; + size_t len; + + BUG_ON(lineno < 0 || lineno > PVC_NLINES); - if (count > PVC_LINELEN) - count = PVC_LINELEN; + len = min(count, sizeof(kbuf) - 1); + if (copy_from_user(kbuf, buf, len)) + return -EFAULT; + kbuf[len] = '\0'; - if (buffer[count-1] == '\n') - count--; + if (len > 0 && kbuf[len - 1] == '\n') + len--; mutex_lock(&pvc_mutex); - strncpy(pvc_lines[lineno], buffer, count); - pvc_lines[lineno][count] = '\0'; + strncpy(pvc_lines[lineno], kbuf, len); + pvc_lines[lineno][len] = '\0'; mutex_unlock(&pvc_mutex); tasklet_schedule(&pvc_display_tasklet); - return origcount; + return count; } -static int pvc_proc_write_scroll(struct file *file, const char *buffer, - unsigned long count, void *data) +static const struct file_operations pvc_line_proc_fops = { + .owner = THIS_MODULE, + .open = pvc_line_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = pvc_line_proc_write, +}; + +static ssize_t pvc_scroll_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) { - int origcount = count; - int cmd = simple_strtol(buffer, NULL, 10); + char kbuf[42]; + size_t len; + int cmd; + + len = min(count, sizeof(kbuf) - 1); + if (copy_from_user(kbuf, buf, len)) + return -EFAULT; + kbuf[len] = '\0'; + + cmd = simple_strtol(kbuf, NULL, 10); mutex_lock(&pvc_mutex); if (scroll_interval != 0) @@ -110,22 +130,31 @@ static int pvc_proc_write_scroll(struct file *file, const char *buffer, } mutex_unlock(&pvc_mutex); - return origcount; + return count; } -static int pvc_proc_read_scroll(char *page, char **start, - off_t off, int count, - int *eof, void *data) +static int pvc_scroll_proc_show(struct seq_file *m, void *v) { - char *origpage = page; - mutex_lock(&pvc_mutex); - page += sprintf(page, "%d\n", scroll_dir * scroll_interval); + seq_printf(m, "%d\n", scroll_dir * scroll_interval); mutex_unlock(&pvc_mutex); - return page - origpage; + return 0; } +static int pvc_scroll_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, pvc_scroll_proc_show, NULL); +} + +static const struct file_operations pvc_scroll_proc_fops = { + .owner = THIS_MODULE, + .open = pvc_scroll_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = pvc_scroll_proc_write, +}; void pvc_proc_timerfunc(unsigned long data) { @@ -163,22 +192,16 @@ static int __init pvc_proc_init(void) pvc_linedata[i] = i; } for (i = 0; i < PVC_NLINES; i++) { - proc_entry = create_proc_entry(pvc_linename[i], 0644, - pvc_display_dir); + proc_entry = proc_create_data(pvc_linename[i], 0644, pvc_display_dir, + &pvc_line_proc_fops, &pvc_linedata[i]); if (proc_entry == NULL) goto error; - - proc_entry->read_proc = pvc_proc_read_line; - proc_entry->write_proc = pvc_proc_write_line; - proc_entry->data = &pvc_linedata[i]; } - proc_entry = create_proc_entry("scroll", 0644, pvc_display_dir); + proc_entry = proc_create("scroll", 0644, pvc_display_dir, + &pvc_scroll_proc_fops); if (proc_entry == NULL) goto error; - proc_entry->write_proc = pvc_proc_write_scroll; - proc_entry->read_proc = pvc_proc_read_scroll; - init_timer(&timer); timer.function = pvc_proc_timerfunc; -- GitLab From 59d4a91416957c12ccc4185d90a62eb1b44b2fc8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 24 Nov 2009 22:07:01 +0100 Subject: [PATCH 249/618] MIPS: Excite: move iodev_remove to .devexit.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The function iodev_remove is used only wrapped by __devexit_p so define it using __devexit. Signed-off-by: Uwe Kleine-König Cc: Ming Lei Cc: Henrique de Moraes Holschuh Cc: Greg Kroah-Hartman Cc: David Brownell Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/710/ Signed-off-by: Ralf Baechle --- arch/mips/basler/excite/excite_iodev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c index 938b1d0b7652..733b2420418a 100644 --- a/arch/mips/basler/excite/excite_iodev.c +++ b/arch/mips/basler/excite/excite_iodev.c @@ -34,7 +34,7 @@ static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int); static int __init iodev_probe(struct platform_device *); -static int __exit iodev_remove(struct platform_device *); +static int __devexit iodev_remove(struct platform_device *); static int iodev_open(struct inode *, struct file *); static int iodev_release(struct inode *, struct file *); static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *); @@ -103,7 +103,7 @@ static int __init iodev_probe(struct platform_device *dev) -static int __exit iodev_remove(struct platform_device *dev) +static int __devexit iodev_remove(struct platform_device *dev) { return misc_deregister(&miscdev); } -- GitLab From c47a48d83a7a82c86ff3e74bdcabeee8f6e6b730 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 24 Nov 2009 21:48:36 +0800 Subject: [PATCH 250/618] MIPS: Lemote 2F: Suspend CS5536 MFGPT Timer Before putting the Loongson 2F into wait mode, suspend the MFGPT Timer and after wake-up resume it. This may save some power. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/706/ Signed-off-by: Ralf Baechle --- arch/mips/loongson/lemote-2f/pm.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/mips/loongson/lemote-2f/pm.c b/arch/mips/loongson/lemote-2f/pm.c index 81c06410aa76..d7af2e616592 100644 --- a/arch/mips/loongson/lemote-2f/pm.c +++ b/arch/mips/loongson/lemote-2f/pm.c @@ -22,6 +22,7 @@ #include +#include #include "ec_kb3310b.h" #define I8042_KBD_IRQ 1 @@ -136,3 +137,13 @@ int wakeup_loongson(void) return 0; } + +void __weak mach_suspend(void) +{ + disable_mfgpt0_counter(); +} + +void __weak mach_resume(void) +{ + enable_mfgpt0_counter(); +} -- GitLab From c3d8d85019c9e4f6e4f23d194b6432a2c2464372 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Sat, 28 Nov 2009 14:21:50 +0800 Subject: [PATCH 251/618] MIPS: Loongson: Cleanups of serial port support This patchs uses a loongson_uart_base variable instead of the uart_base[] array and adds a new kernel option to avoid to compile uart_base.c all the time, which will save a little bit of memory for us. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org http://patchwork.linux-mips.org/patch/727/ Signed-off-by: Ralf Baechle --- .../mips/include/asm/mach-loongson/loongson.h | 14 +++++-- arch/mips/loongson/Kconfig | 5 +++ arch/mips/loongson/common/Makefile | 5 ++- arch/mips/loongson/common/init.c | 2 - arch/mips/loongson/common/serial.c | 10 +++-- arch/mips/loongson/common/uart_base.c | 41 +++++++++++-------- 6 files changed, 51 insertions(+), 26 deletions(-) diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index 06c28f387116..ee8bc8376972 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -31,9 +31,17 @@ extern void __init prom_init_memory(void); extern void __init prom_init_cmdline(void); extern void __init prom_init_machtype(void); extern void __init prom_init_env(void); -extern unsigned long _loongson_uart_base; -extern unsigned long uart8250_base[]; -extern void prom_init_uart_base(void); +#ifdef CONFIG_LOONGSON_UART_BASE +extern unsigned long _loongson_uart_base, loongson_uart_base; +extern void prom_init_loongson_uart_base(void); +#endif + +static inline void prom_init_uart_base(void) +{ +#ifdef CONFIG_LOONGSON_UART_BASE + prom_init_loongson_uart_base(); +#endif +} /* irq operation functions */ extern void bonito_irqdispatch(void); diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index 7a86987b478f..3df1967dea08 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -78,3 +78,8 @@ config LOONGSON_SUSPEND bool default y depends on CPU_SUPPORTS_CPUFREQ && SUSPEND + +config LOONGSON_UART_BASE + bool + default y + depends on EARLY_PRINTK || SERIAL_8250 diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index 8d71892413df..7668c4de1151 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -3,13 +3,14 @@ # obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ - pci.o bonito-irq.o mem.o machtype.o platform.o uart_base.o + pci.o bonito-irq.o mem.o machtype.o platform.o # -# Early printk support +# Serial port support # obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_SERIAL_8250) += serial.o +obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o # # Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c index 2b92a23d29dd..a2abd9355737 100644 --- a/arch/mips/loongson/common/init.c +++ b/arch/mips/loongson/common/init.c @@ -31,9 +31,7 @@ void __init prom_init(void) prom_init_memory(); /*init the uart base address */ -#if defined(CONFIG_EARLY_PRINTK) || defined(CONFIG_SERIAL_8250) prom_init_uart_base(); -#endif } void __init prom_free_prom_memory(void) diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c index ea29db099aee..23b66a5f88cb 100644 --- a/arch/mips/loongson/common/serial.c +++ b/arch/mips/loongson/common/serial.c @@ -57,12 +57,16 @@ static struct platform_device uart8250_device = { static int __init serial_init(void) { - if (uart8250_data[mips_machtype][0].iotype == UPIO_MEM) + unsigned char iotype; + + iotype = uart8250_data[mips_machtype][0].iotype; + + if (UPIO_MEM == iotype) uart8250_data[mips_machtype][0].membase = (void __iomem *)_loongson_uart_base; - else if (uart8250_data[mips_machtype][0].iotype == UPIO_PORT) + else if (UPIO_PORT == iotype) uart8250_data[mips_machtype][0].iobase = - uart8250_base[mips_machtype] - LOONGSON_PCIIO_BASE; + loongson_uart_base - LOONGSON_PCIIO_BASE; uart8250_device.dev.platform_data = uart8250_data[mips_machtype]; diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c index 1d636f4f7505..78ff66ae749e 100644 --- a/arch/mips/loongson/common/uart_base.c +++ b/arch/mips/loongson/common/uart_base.c @@ -13,24 +13,33 @@ #include -unsigned long __maybe_unused _loongson_uart_base; +/* ioremapped */ +unsigned long _loongson_uart_base; EXPORT_SYMBOL(_loongson_uart_base); +/* raw */ +unsigned long loongson_uart_base; +EXPORT_SYMBOL(loongson_uart_base); -unsigned long __maybe_unused uart8250_base[] = { - [MACH_LOONGSON_UNKNOWN] 0, - [MACH_LEMOTE_FL2E] (LOONGSON_PCIIO_BASE + 0x3f8), - [MACH_LEMOTE_FL2F] (LOONGSON_PCIIO_BASE + 0x2f8), - [MACH_LEMOTE_ML2F7] (LOONGSON_LIO1_BASE + 0x3f8), - [MACH_LEMOTE_YL2F89] (LOONGSON_LIO1_BASE + 0x3f8), - [MACH_DEXXON_GDIUM2F10] (LOONGSON_LIO1_BASE + 0x3f8), - [MACH_LEMOTE_NAS] (LOONGSON_LIO1_BASE + 0x3f8), - [MACH_LEMOTE_LL2F] (LOONGSON_PCIIO_BASE + 0x2f8), - [MACH_LOONGSON_END] 0, -}; -EXPORT_SYMBOL(uart8250_base); - -void __maybe_unused prom_init_uart_base(void) +void prom_init_loongson_uart_base(void) { + switch (mips_machtype) { + case MACH_LEMOTE_FL2E: + loongson_uart_base = LOONGSON_PCIIO_BASE + 0x3f8; + break; + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_LL2F: + loongson_uart_base = LOONGSON_PCIIO_BASE + 0x2f8; + break; + case MACH_LEMOTE_ML2F7: + case MACH_LEMOTE_YL2F89: + case MACH_DEXXON_GDIUM2F10: + case MACH_LEMOTE_NAS: + default: + /* The CPU provided serial port */ + loongson_uart_base = LOONGSON_LIO1_BASE + 0x3f8; + break; + } + _loongson_uart_base = - (unsigned long)ioremap_nocache(uart8250_base[mips_machtype], 8); + (unsigned long)ioremap_nocache(loongson_uart_base, 8); } -- GitLab From de4148f3ef54b644a181ad75a6fb4b373f2b01f0 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Dec 2009 01:57:35 +0000 Subject: [PATCH 252/618] MIPS: eXcite: Remove platform. The platform has never been fully merged Signed-off-by: Ralf Baechle Cc: Thomas Koeller Cc: David Woodhouse Cc: Wim Van Sebroeck Cc: linux-kernel@vger.kernel.org Cc: linux-mtd@lists.infradead.org Acked-by: David Woodhouse Acked-by: Wim Van Sebroeck --- arch/mips/Kconfig | 18 - arch/mips/Makefile | 7 - arch/mips/basler/excite/Kconfig | 9 - arch/mips/basler/excite/Makefile | 8 - arch/mips/basler/excite/excite_device.c | 403 ----- arch/mips/basler/excite/excite_iodev.c | 178 --- arch/mips/basler/excite/excite_iodev.h | 10 - arch/mips/basler/excite/excite_irq.c | 122 -- arch/mips/basler/excite/excite_procfs.c | 92 -- arch/mips/basler/excite/excite_prom.c | 144 -- arch/mips/basler/excite/excite_setup.c | 302 ---- arch/mips/configs/ar7_defconfig | 1 - arch/mips/configs/bcm47xx_defconfig | 1 - arch/mips/configs/bcm63xx_defconfig | 1 - arch/mips/configs/bigsur_defconfig | 1 - arch/mips/configs/capcella_defconfig | 1 - arch/mips/configs/cavium-octeon_defconfig | 1 - arch/mips/configs/cobalt_defconfig | 1 - arch/mips/configs/db1000_defconfig | 1 - arch/mips/configs/db1100_defconfig | 1 - arch/mips/configs/db1200_defconfig | 1 - arch/mips/configs/db1500_defconfig | 1 - arch/mips/configs/db1550_defconfig | 1 - arch/mips/configs/decstation_defconfig | 1 - arch/mips/configs/e55_defconfig | 1 - arch/mips/configs/excite_defconfig | 1335 ----------------- arch/mips/configs/fuloong2e_defconfig | 1 - arch/mips/configs/ip22_defconfig | 1 - arch/mips/configs/ip27_defconfig | 1 - arch/mips/configs/ip28_defconfig | 1 - arch/mips/configs/ip32_defconfig | 1 - arch/mips/configs/jazz_defconfig | 1 - arch/mips/configs/jmr3927_defconfig | 1 - arch/mips/configs/lasat_defconfig | 1 - arch/mips/configs/lemote2f_defconfig | 1 - arch/mips/configs/malta_defconfig | 1 - arch/mips/configs/markeins_defconfig | 1 - arch/mips/configs/mipssim_defconfig | 1 - arch/mips/configs/mpc30x_defconfig | 1 - arch/mips/configs/msp71xx_defconfig | 1 - arch/mips/configs/mtx1_defconfig | 1 - arch/mips/configs/pb1100_defconfig | 1 - arch/mips/configs/pb1500_defconfig | 1 - arch/mips/configs/pb1550_defconfig | 1 - arch/mips/configs/pnx8335-stb225_defconfig | 1 - arch/mips/configs/pnx8550-jbs_defconfig | 1 - arch/mips/configs/pnx8550-stb810_defconfig | 1 - arch/mips/configs/powertv_defconfig | 1 - arch/mips/configs/rb532_defconfig | 1 - arch/mips/configs/rbtx49xx_defconfig | 1 - arch/mips/configs/rm200_defconfig | 1 - arch/mips/configs/sb1250-swarm_defconfig | 1 - arch/mips/configs/tb0219_defconfig | 1 - arch/mips/configs/tb0226_defconfig | 1 - arch/mips/configs/tb0287_defconfig | 1 - arch/mips/configs/workpad_defconfig | 1 - arch/mips/configs/wrppmc_defconfig | 1 - arch/mips/configs/yosemite_defconfig | 1 - .../asm/mach-excite/cpu-feature-overrides.h | 48 - arch/mips/include/asm/mach-excite/excite.h | 154 -- .../include/asm/mach-excite/excite_fpga.h | 80 - .../asm/mach-excite/excite_nandflash.h | 7 - arch/mips/include/asm/mach-excite/rm9k_eth.h | 23 - arch/mips/include/asm/mach-excite/rm9k_wdt.h | 12 - .../mips/include/asm/mach-excite/rm9k_xicap.h | 16 - arch/mips/include/asm/mach-excite/war.h | 25 - arch/mips/pci/Makefile | 1 - arch/mips/pci/fixup-excite.c | 36 - arch/mips/pci/pci-excite.c | 149 -- drivers/mtd/nand/Kconfig | 8 - drivers/mtd/nand/Makefile | 1 - drivers/mtd/nand/excite_nandflash.c | 248 --- drivers/watchdog/Kconfig | 10 - drivers/watchdog/Makefile | 1 - drivers/watchdog/rm9k_wdt.c | 419 ------ 75 files changed, 3912 deletions(-) delete mode 100644 arch/mips/basler/excite/Kconfig delete mode 100644 arch/mips/basler/excite/Makefile delete mode 100644 arch/mips/basler/excite/excite_device.c delete mode 100644 arch/mips/basler/excite/excite_iodev.c delete mode 100644 arch/mips/basler/excite/excite_iodev.h delete mode 100644 arch/mips/basler/excite/excite_irq.c delete mode 100644 arch/mips/basler/excite/excite_procfs.c delete mode 100644 arch/mips/basler/excite/excite_prom.c delete mode 100644 arch/mips/basler/excite/excite_setup.c delete mode 100644 arch/mips/configs/excite_defconfig delete mode 100644 arch/mips/include/asm/mach-excite/cpu-feature-overrides.h delete mode 100644 arch/mips/include/asm/mach-excite/excite.h delete mode 100644 arch/mips/include/asm/mach-excite/excite_fpga.h delete mode 100644 arch/mips/include/asm/mach-excite/excite_nandflash.h delete mode 100644 arch/mips/include/asm/mach-excite/rm9k_eth.h delete mode 100644 arch/mips/include/asm/mach-excite/rm9k_wdt.h delete mode 100644 arch/mips/include/asm/mach-excite/rm9k_xicap.h delete mode 100644 arch/mips/include/asm/mach-excite/war.h delete mode 100644 arch/mips/pci/fixup-excite.c delete mode 100644 arch/mips/pci/pci-excite.c delete mode 100644 drivers/mtd/nand/excite_nandflash.c delete mode 100644 drivers/watchdog/rm9k_wdt.c diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 0be245d28a1d..f374ccac1917 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -50,23 +50,6 @@ config AR7 Support for the Texas Instruments AR7 System-on-a-Chip family: TNETD7100, 7200 and 7300. -config BASLER_EXCITE - bool "Basler eXcite smart camera" - select CEVT_R4K - select CSRC_R4K - select DMA_COHERENT - select HW_HAS_PCI - select IRQ_CPU - select IRQ_CPU_RM7K - select IRQ_CPU_RM9K - select MIPS_RM9122 - select SYS_HAS_CPU_RM9000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - help - The eXcite is a smart camera platform manufactured by - Basler Vision Technologies AG. - config BCM47XX bool "BCM47XX based boards" select CEVT_R4K @@ -701,7 +684,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD endchoice source "arch/mips/alchemy/Kconfig" -source "arch/mips/basler/excite/Kconfig" source "arch/mips/bcm63xx/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index d2c39fdcdfeb..1893efd43fca 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -368,13 +368,6 @@ core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/ cflags-$(CONFIG_PMC_YOSEMITE) += -I$(srctree)/arch/mips/include/asm/mach-yosemite load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000 -# -# Basler eXcite -# -core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/ -cflags-$(CONFIG_BASLER_EXCITE) += -I$(srctree)/arch/mips/include/asm/mach-excite -load-$(CONFIG_BASLER_EXCITE) += 0x80100000 - # # LASAT platforms # diff --git a/arch/mips/basler/excite/Kconfig b/arch/mips/basler/excite/Kconfig deleted file mode 100644 index ba506075608b..000000000000 --- a/arch/mips/basler/excite/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -config BASLER_EXCITE_PROTOTYPE - bool "Support for pre-release units" - depends on BASLER_EXCITE - default n - help - Pre-series (prototype) units are different from later ones in - some ways. Select this option if you have one of these. Please - note that a kernel built with this option selected will not be - able to run on normal units. diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile deleted file mode 100644 index cff29cf46d03..000000000000 --- a/arch/mips/basler/excite/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for Basler eXcite -# - -obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \ - excite_device.o excite_procfs.o - -obj-m += excite_iodev.o diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c deleted file mode 100644 index e00bc2d7f301..000000000000 --- a/arch/mips/basler/excite/excite_device.c +++ /dev/null @@ -1,403 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "excite_iodev.h" - -#define RM9K_GE_UNIT 0 -#define XICAP_UNIT 0 -#define NAND_UNIT 0 - -#define DLL_TIMEOUT 3 /* seconds */ - - -#define RINIT(__start__, __end__, __name__, __parent__) { \ - .name = __name__ "_0", \ - .start = (__start__), \ - .end = (__end__), \ - .flags = 0, \ - .parent = (__parent__) \ -} - -#define RINIT_IRQ(__irq__, __name__) { \ - .name = __name__ "_0", \ - .start = (__irq__), \ - .end = (__irq__), \ - .flags = IORESOURCE_IRQ, \ - .parent = NULL \ -} - - - -enum { - slice_xicap, - slice_eth -}; - - - -static struct resource - excite_ctr_resource __maybe_unused = { - .name = "GPI counters", - .start = 0, - .end = 5, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_gpislice_resource __maybe_unused = { - .name = "GPI slices", - .start = 0, - .end = 1, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_mdio_channel_resource __maybe_unused = { - .name = "MDIO channels", - .start = 0, - .end = 1, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_fifomem_resource __maybe_unused = { - .name = "FIFO memory", - .start = 0, - .end = 767, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_scram_resource __maybe_unused = { - .name = "Scratch RAM", - .start = EXCITE_PHYS_SCRAM, - .end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_fpga_resource __maybe_unused = { - .name = "System FPGA", - .start = EXCITE_PHYS_FPGA, - .end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_nand_resource __maybe_unused = { - .name = "NAND flash control", - .start = EXCITE_PHYS_NAND, - .end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_titan_resource __maybe_unused = { - .name = "TITAN registers", - .start = EXCITE_PHYS_TITAN, - .end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }; - - - -static void adjust_resources(struct resource *res, unsigned int n) -{ - struct resource *p; - const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM - | IORESOURCE_IRQ | IORESOURCE_DMA; - - for (p = res; p < res + n; p++) { - const struct resource * const parent = p->parent; - if (parent) { - p->start += parent->start; - p->end += parent->start; - p->flags = parent->flags & mask; - } - } -} - - - -#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) -static struct resource xicap_rsrc[] = { - RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource), - RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource), - RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource), - RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource), - RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource), - RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource), - RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource), - RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource), - RINIT_IRQ(TITAN_IRQ, XICAP_RESOURCE_IRQ) -}; - -static struct platform_device xicap_pdev = { - .name = XICAP_NAME, - .id = XICAP_UNIT, - .num_resources = ARRAY_SIZE(xicap_rsrc), - .resource = xicap_rsrc -}; - -/* - * Create a platform device for the GPI port that receives the - * image data from the embedded camera. - */ -static int __init xicap_devinit(void) -{ - unsigned long tend; - u32 reg; - int retval; - - adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc)); - - /* Power up the slice and configure it. */ - reg = titan_readl(CPTC1R); - reg &= ~(0x11100 << slice_xicap); - titan_writel(reg, CPTC1R); - - /* Enable slice & DLL. */ - reg= titan_readl(CPRR); - reg &= ~(0x00030003 << (slice_xicap * 2)); - titan_writel(reg, CPRR); - - /* Wait for DLLs to lock */ - tend = jiffies + DLL_TIMEOUT * HZ; - while (time_before(jiffies, tend)) { - if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4)))) - break; - yield(); - } - - if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) { - printk(KERN_ERR "%s: DLL not locked after %u seconds\n", - xicap_pdev.name, DLL_TIMEOUT); - retval = -ETIME; - } else { - /* Register platform device */ - retval = platform_device_register(&xicap_pdev); - } - - return retval; -} - -device_initcall(xicap_devinit); -#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */ - - - -#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) -static struct resource wdt_rsrc[] = { - RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource), - RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource), - RINIT_IRQ(TITAN_IRQ, WDT_RESOURCE_IRQ) -}; - -static struct platform_device wdt_pdev = { - .name = WDT_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(wdt_rsrc), - .resource = wdt_rsrc -}; - -/* - * Create a platform device for the GPI port that receives the - * image data from the embedded camera. - */ -static int __init wdt_devinit(void) -{ - adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc)); - return platform_device_register(&wdt_pdev); -} - -device_initcall(wdt_devinit); -#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */ - - - -static struct resource excite_nandflash_rsrc[] = { - RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS, &excite_nand_resource) -}; - -static struct platform_device excite_nandflash_pdev = { - .name = "excite_nand", - .id = NAND_UNIT, - .num_resources = ARRAY_SIZE(excite_nandflash_rsrc), - .resource = excite_nandflash_rsrc -}; - -/* - * Create a platform device for the access to the nand-flash - * port - */ -static int __init excite_nandflash_devinit(void) -{ - adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc)); - - /* nothing to be done here */ - - /* Register platform device */ - return platform_device_register(&excite_nandflash_pdev); -} - -device_initcall(excite_nandflash_devinit); - - - -static struct resource iodev_rsrc[] = { - RINIT_IRQ(FPGA1_IRQ, IODEV_RESOURCE_IRQ) -}; - -static struct platform_device io_pdev = { - .name = IODEV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(iodev_rsrc), - .resource = iodev_rsrc -}; - -/* - * Create a platform device for the external I/O ports. - */ -static int __init io_devinit(void) -{ - adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc)); - return platform_device_register(&io_pdev); -} - -device_initcall(io_devinit); - - - - -#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) -static struct resource rm9k_ge_rsrc[] = { - RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource), - RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource), - RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource), - RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource), - RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource), - RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource), - RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource), - RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource), - RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource), - RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource), - RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource), - RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource), - RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource), - RINIT_IRQ(TITAN_IRQ, RM9K_GE_RESOURCE_IRQ_MAIN), - RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY) -}; - -static struct platform_device rm9k_ge_pdev = { - .name = RM9K_GE_NAME, - .id = RM9K_GE_UNIT, - .num_resources = ARRAY_SIZE(rm9k_ge_rsrc), - .resource = rm9k_ge_rsrc -}; - - - -/* - * Create a platform device for the Ethernet port. - */ -static int __init rm9k_ge_devinit(void) -{ - u32 reg; - - adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc)); - - /* Power up the slice and configure it. */ - reg = titan_readl(CPTC1R); - reg &= ~(0x11000 << slice_eth); - reg |= 0x100 << slice_eth; - titan_writel(reg, CPTC1R); - - /* Take the MAC out of reset, reset the DLLs. */ - reg = titan_readl(CPRR); - reg &= ~(0x00030000 << (slice_eth * 2)); - reg |= 0x3 << (slice_eth * 2); - titan_writel(reg, CPRR); - - return platform_device_register(&rm9k_ge_pdev); -} - -device_initcall(rm9k_ge_devinit); -#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */ - - - -static int __init excite_setup_devs(void) -{ - int res; - u32 reg; - - /* Enable xdma and fifo interrupts */ - reg = titan_readl(0x0050); - titan_writel(reg | 0x18000000, 0x0050); - - res = request_resource(&iomem_resource, &excite_titan_resource); - if (res) - return res; - res = request_resource(&iomem_resource, &excite_scram_resource); - if (res) - return res; - res = request_resource(&iomem_resource, &excite_fpga_resource); - if (res) - return res; - res = request_resource(&iomem_resource, &excite_nand_resource); - if (res) - return res; - excite_fpga_resource.flags = excite_fpga_resource.parent->flags & - ( IORESOURCE_IO | IORESOURCE_MEM - | IORESOURCE_IRQ | IORESOURCE_DMA); - excite_nand_resource.flags = excite_nand_resource.parent->flags & - ( IORESOURCE_IO | IORESOURCE_MEM - | IORESOURCE_IRQ | IORESOURCE_DMA); - - return 0; -} - -arch_initcall(excite_setup_devs); - diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c deleted file mode 100644 index 733b2420418a..000000000000 --- a/arch/mips/basler/excite/excite_iodev.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Copyright (C) 2005 by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "excite_iodev.h" - - - -static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int); -static int __init iodev_probe(struct platform_device *); -static int __devexit iodev_remove(struct platform_device *); -static int iodev_open(struct inode *, struct file *); -static int iodev_release(struct inode *, struct file *); -static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *); -static unsigned int iodev_poll(struct file *, struct poll_table_struct *); -static irqreturn_t iodev_irqhdl(int, void *); - - - -static const char iodev_name[] = "iodev"; -static unsigned int iodev_irq; -static DECLARE_WAIT_QUEUE_HEAD(wq); - - - -static const struct file_operations fops = -{ - .owner = THIS_MODULE, - .open = iodev_open, - .release = iodev_release, - .read = iodev_read, - .poll = iodev_poll -}; - -static struct miscdevice miscdev = -{ - .minor = MISC_DYNAMIC_MINOR, - .name = iodev_name, - .fops = &fops -}; - -static struct platform_driver iodev_driver = { - .driver = { - .name = iodev_name, - .owner = THIS_MODULE, - }, - .probe = iodev_probe, - .remove = __devexit_p(iodev_remove), -}; - - - -static const struct resource * -iodev_get_resource(struct platform_device *pdv, const char *name, - unsigned int type) -{ - char buf[80]; - if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf) - return NULL; - return platform_get_resource_byname(pdv, type, buf); -} - - - -/* No hotplugging on the platform bus - use __init */ -static int __init iodev_probe(struct platform_device *dev) -{ - const struct resource * const ri = - iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ); - - if (unlikely(!ri)) - return -ENXIO; - - iodev_irq = ri->start; - return misc_register(&miscdev); -} - - - -static int __devexit iodev_remove(struct platform_device *dev) -{ - return misc_deregister(&miscdev); -} - -static int iodev_open(struct inode *i, struct file *f) -{ - int ret; - - ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED, - iodev_name, &miscdev); - - return ret; -} - -static int iodev_release(struct inode *i, struct file *f) -{ - free_irq(iodev_irq, &miscdev); - return 0; -} - - - - -static ssize_t -iodev_read(struct file *f, char __user *d, size_t s, loff_t *o) -{ - ssize_t ret; - DEFINE_WAIT(w); - - prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE); - if (!signal_pending(current)) - schedule(); - ret = signal_pending(current) ? -ERESTARTSYS : 0; - finish_wait(&wq, &w); - return ret; -} - - -static unsigned int iodev_poll(struct file *f, struct poll_table_struct *p) -{ - poll_wait(f, &wq, p); - return POLLOUT | POLLWRNORM; -} - -static irqreturn_t iodev_irqhdl(int irq, void *ctxt) -{ - wake_up(&wq); - - return IRQ_HANDLED; -} - -static int __init iodev_init_module(void) -{ - return platform_driver_register(&iodev_driver); -} - - - -static void __exit iodev_cleanup_module(void) -{ - platform_driver_unregister(&iodev_driver); -} - -module_init(iodev_init_module); -module_exit(iodev_cleanup_module); - - - -MODULE_AUTHOR("Thomas Koeller "); -MODULE_DESCRIPTION("Basler eXcite i/o interrupt handler"); -MODULE_VERSION("0.0"); -MODULE_LICENSE("GPL"); diff --git a/arch/mips/basler/excite/excite_iodev.h b/arch/mips/basler/excite/excite_iodev.h deleted file mode 100644 index cbfbb5d2ee62..000000000000 --- a/arch/mips/basler/excite/excite_iodev.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __EXCITE_IODEV_H__ -#define __EXCITE_IODEV_H__ - -/* Device name */ -#define IODEV_NAME "iodev" - -/* Resource names */ -#define IODEV_RESOURCE_IRQ "excite_iodev_irq" - -#endif /* __EXCITE_IODEV_H__ */ diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c deleted file mode 100644 index 934e0a6b1011..000000000000 --- a/arch/mips/basler/excite/excite_irq.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright (C) by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -extern asmlinkage void excite_handle_int(void); - -/* - * Initialize the interrupt handler - */ -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(); - rm7k_cpu_irq_init(); - rm9k_cpu_irq_init(); -} - -asmlinkage void plat_irq_dispatch(void) -{ - const u32 - interrupts = read_c0_cause() >> 8, - mask = ((read_c0_status() >> 8) & 0x000000ff) | - (read_c0_intcontrol() & 0x0000ff00), - pending = interrupts & mask; - u32 msgintflags, msgintmask, msgint; - - /* process timer interrupt */ - if (pending & (1 << TIMER_IRQ)) { - do_IRQ(TIMER_IRQ); - return; - } - - /* Process PCI interrupts */ -#if USB_IRQ < 10 - msgintflags = ocd_readl(INTP0Status0 + (USB_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (USB_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (USB_MSGINT % 0x20)); - if ((pending & (1 << USB_IRQ)) && msgint) { -#else - if (pending & (1 << USB_IRQ)) { -#endif - do_IRQ(USB_IRQ); - return; - } - - /* Process TITAN interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (TITAN_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (TITAN_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20)); - if ((pending & (1 << TITAN_IRQ)) && msgint) { - ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10)); - do_IRQ(TITAN_IRQ); - return; - } - - /* Process FPGA line #0 interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (FPGA0_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (FPGA0_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (FPGA0_MSGINT % 0x20)); - if ((pending & (1 << FPGA0_IRQ)) && msgint) { - do_IRQ(FPGA0_IRQ); - return; - } - - /* Process FPGA line #1 interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (FPGA1_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (FPGA1_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (FPGA1_MSGINT % 0x20)); - if ((pending & (1 << FPGA1_IRQ)) && msgint) { - do_IRQ(FPGA1_IRQ); - return; - } - - /* Process PHY interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (PHY_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (PHY_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (PHY_MSGINT % 0x20)); - if ((pending & (1 << PHY_IRQ)) && msgint) { - do_IRQ(PHY_IRQ); - return; - } - - /* Process spurious interrupts */ - spurious_interrupt(); -} diff --git a/arch/mips/basler/excite/excite_procfs.c b/arch/mips/basler/excite/excite_procfs.c deleted file mode 100644 index 08923e6825b5..000000000000 --- a/arch/mips/basler/excite/excite_procfs.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Copyright (C) 2004, 2005 by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * Procfs support for Basler eXcite - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static int excite_unit_id_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%06x", unit_id); - return 0; -} - -static int excite_unit_id_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, excite_unit_id_proc_show, NULL); -} - -static const struct file_operations excite_unit_id_proc_fops = { - .owner = THIS_MODULE, - .open = excite_unit_id_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int -excite_bootrom_read(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - void __iomem * src; - - if (off >= EXCITE_SIZE_BOOTROM) { - *eof = 1; - return 0; - } - - if ((off + count) > EXCITE_SIZE_BOOTROM) - count = EXCITE_SIZE_BOOTROM - off; - - src = ioremap(EXCITE_PHYS_BOOTROM + off, count); - if (src) { - memcpy_fromio(page, src, count); - iounmap(src); - *start = page; - } else { - count = -ENOMEM; - } - - return count; -} - -void excite_procfs_init(void) -{ - /* Create & populate /proc/excite */ - struct proc_dir_entry * const pdir = proc_mkdir("excite", NULL); - if (pdir) { - struct proc_dir_entry * e; - - e = proc_create("unit_id", S_IRUGO, pdir, - &excite_unit_id_proc_fops); - if (e) e->size = 6; - - e = create_proc_read_entry("bootrom", S_IRUGO, pdir, - excite_bootrom_read, NULL); - if (e) e->size = EXCITE_SIZE_BOOTROM; - } -} diff --git a/arch/mips/basler/excite/excite_prom.c b/arch/mips/basler/excite/excite_prom.c deleted file mode 100644 index 68d8bc597e34..000000000000 --- a/arch/mips/basler/excite/excite_prom.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) 2004, 2005 by Thomas Koeller (thomas.koeller@baslerweb.com) - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and - * Manish Lachwani. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* This struct is used by Redboot to pass arguments to the kernel */ -typedef struct -{ - char *name; - char *val; -} t_env_var; - -struct parmblock { - t_env_var memsize; - t_env_var modetty0; - t_env_var ethaddr; - t_env_var env_end; - char *argv[2]; - char text[0]; -}; - -static unsigned int prom_argc; -static const char ** prom_argv; -static const t_env_var * prom_env; - -static void prom_halt(void) __attribute__((noreturn)); -static void prom_exit(void) __attribute__((noreturn)); - - - -const char *get_system_type(void) -{ - return "Basler eXcite"; -} - -/* - * Halt the system - */ -static void prom_halt(void) -{ - printk(KERN_NOTICE "\n** System halted.\n"); - while (1) - asm volatile ( - "\t.set\tmips3\n" - "\twait\n" - "\t.set\tmips0\n" - ); -} - -/* - * Reset the CPU and re-enter Redboot - */ -static void prom_exit(void) -{ - unsigned int i; - volatile unsigned char * const flg = - (volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_DPR); - - /* Clear the watchdog reset flag, set the reboot flag */ - *flg &= ~0x01; - *flg |= 0x80; - - for (i = 0; i < 10; i++) { - *(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_SYSCTL) = 0x02; - iob(); - mdelay(1000); - } - - printk(KERN_NOTICE "Reset failed\n"); - prom_halt(); -} - -static const char __init *prom_getenv(char *name) -{ - const t_env_var * p; - for (p = prom_env; p->name != NULL; p++) - if(strcmp(name, p->name) == 0) - break; - return p->val; -} - -/* - * Init routine which accepts the variables from Redboot - */ -void __init prom_init(void) -{ - const struct parmblock * const pb = (struct parmblock *) fw_arg2; - - prom_argc = fw_arg0; - prom_argv = (const char **) fw_arg1; - prom_env = &pb->memsize; - - /* Callbacks for halt, restart */ - _machine_restart = (void (*)(char *)) prom_exit; - _machine_halt = prom_halt; - -#ifdef CONFIG_32BIT - /* copy command line */ - strcpy(arcs_cmdline, prom_argv[1]); - memsize = simple_strtol(prom_getenv("memsize"), NULL, 16); - strcpy(modetty, prom_getenv("modetty0")); -#endif /* CONFIG_32BIT */ - -#ifdef CONFIG_64BIT -# error 64 bit support not implemented -#endif /* CONFIG_64BIT */ -} - -/* This is called from free_initmem(), so we need to provide it */ -void __init prom_free_prom_memory(void) -{ - /* Nothing to do */ -} diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c deleted file mode 100644 index d66b3b8edf2a..000000000000 --- a/arch/mips/basler/excite/excite_setup.c +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Copyright (C) 2004, 2005 by Basler Vision Technologies AG - * Author: Thomas Koeller - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and - * Manish Lachwani. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define TITAN_UART_CLK 25000000 - -#if 1 -/* normal serial port assignment */ -#define REGBASE_SER0 0x0208 -#define REGBASE_SER1 0x0238 -#define MASK_SER0 0x1 -#define MASK_SER1 0x2 -#else -/* serial ports swapped */ -#define REGBASE_SER0 0x0238 -#define REGBASE_SER1 0x0208 -#define MASK_SER0 0x2 -#define MASK_SER1 0x1 -#endif - -unsigned long memsize; -char modetty[30]; -unsigned int titan_irq = TITAN_IRQ; -static void __iomem * ctl_regs; -u32 unit_id; - -volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD); -volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN); - -/* Protect access to shared GPI registers */ -DEFINE_SPINLOCK(titan_lock); -int titan_irqflags; - - -/* - * The eXcite platform uses the alternate timer interrupt - * - * Fixme: At the time of this writing cevt-r4k.c doesn't yet know about how - * to handle the alternate timer interrupt of the RM9000. - */ -void __init plat_time_init(void) -{ - const u32 modebit5 = ocd_readl(0x00e4); - unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2; - unsigned int div = ((modebit5 >> 16) & 0x1f) + 2; - - if (div == 33) - div = 1; - mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2; -} - -static int __init excite_init_console(void) -{ -#if defined(CONFIG_SERIAL_8250) - static __initdata char serr[] = - KERN_ERR "Serial port #%u setup failed\n"; - struct uart_port up; - - /* Take the DUART out of reset */ - titan_writel(0x00ff1cff, CPRR); - -#if (CONFIG_SERIAL_8250_NR_UARTS > 1) - /* Enable both ports */ - titan_writel(MASK_SER0 | MASK_SER1, UACFG); -#else - /* Enable port #0 only */ - titan_writel(MASK_SER0, UACFG); -#endif - - /* - * Set up serial port #0. Do not use autodetection; the result is - * not what we want. - */ - memset(&up, 0, sizeof(up)); - up.membase = (char *) titan_addr(REGBASE_SER0); - up.irq = TITAN_IRQ; - up.uartclk = TITAN_UART_CLK; - up.regshift = 0; - up.iotype = UPIO_RM9000; - up.type = PORT_RM9000; - up.flags = UPF_SHARE_IRQ; - up.line = 0; - if (early_serial_setup(&up)) - printk(serr, up.line); - -#if CONFIG_SERIAL_8250_NR_UARTS > 1 - /* And now for port #1. */ - up.membase = (char *) titan_addr(REGBASE_SER1); - up.line = 1; - if (early_serial_setup(&up)) - printk(serr, up.line); -#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */ -#else - /* Leave the DUART in reset */ - titan_writel(0x00ff3cff, CPRR); -#endif /* defined(CONFIG_SERIAL_8250) */ - - return 0; -} - -static int __init excite_platform_init(void) -{ - unsigned int i; - unsigned char buf[3]; - u8 reg; - void __iomem * dpr; - - /* BIU buffer allocations */ - ocd_writel(8, CPURSLMT); /* CPU */ - titan_writel(4, CPGRWL); /* GPI / Ethernet */ - - /* Map control registers located in FPGA */ - ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16); - if (!ctl_regs) - panic("eXcite: failed to map platform control registers\n"); - memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf)); - unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16); - - /* Clear the reboot flag */ - dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1); - reg = __raw_readb(dpr); - __raw_writeb(reg & 0x7f, dpr); - iounmap(dpr); - - /* Interrupt controller setup */ - for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) { - ocd_writel(0x00000000, i + 0x04); - ocd_writel(0xffffffff, i + 0x0c); - } - ocd_writel(0x2, NMICONFIG); - - ocd_writel(0x1 << (TITAN_MSGINT % 0x20), - INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20))); - ocd_writel((0x1 << (FPGA0_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))); - ocd_writel((0x1 << (FPGA1_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))); - ocd_writel((0x1 << (PHY_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))); -#if USB_IRQ < 10 - ocd_writel((0x1 << (USB_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))); -#endif - /* Enable the packet FIFO, XDMA and XDMA arbiter */ - titan_writel(0x00ff18ff, CPRR); - - /* - * Set up the PADMUX. Power down all ethernet slices, - * they will be powered up and configured at device startup. - */ - titan_writel(0x00878206, CPTC1R); - titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */ - - /* Reset and enable the FIFO block */ - titan_writel(0x00000001, SDRXFCIE); - titan_writel(0x00000001, SDTXFCIE); - titan_writel(0x00000100, SDRXFCIE); - titan_writel(0x00000000, SDTXFCIE); - - /* - * Initialize the common interrupt shared by all components of - * the GPI/Ethernet subsystem. - */ - titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0); - titan_writel(TITAN_MSGINT, CPCFG1); - - /* - * XDMA configuration. - * In order for the XDMA to be sharable among multiple drivers, - * the setup must be done here in the platform. The reason is that - * this setup can only be done while the XDMA is in reset. If this - * were done in a driver, it would interrupt all other drivers - * using the XDMA. - */ - titan_writel(0x80021dff, GXCFG); /* XDMA reset */ - titan_writel(0x00000000, CPXCISRA); - titan_writel(0x00000000, CPXCISRB); /* clear pending interrupts */ -#if defined(CONFIG_HIGHMEM) -# error change for HIGHMEM support! -#else - titan_writel(0x00000000, GXDMADRPFX); /* buffer address prefix */ -#endif - titan_writel(0, GXDMA_DESCADR); - - for (i = 0x5040; i <= 0x5300; i += 0x0040) - titan_writel(0x80080000, i); /* reset channel */ - - titan_writel((0x1 << 29) /* no sparse tx descr. */ - | (0x1 << 28) /* no sparse rx descr. */ - | (0x1 << 23) | (0x1 << 24) /* descriptor coherency */ - | (0x1 << 21) | (0x1 << 22) /* data coherency */ - | (0x1 << 17) - | 0x1dff, - GXCFG); - -#if defined(CONFIG_SMP) -# error No SMP support -#else - /* All interrupts go to core #0 only. */ - titan_writel(0x1f007fff, CPDST0A); - titan_writel(0x00000000, CPDST0B); - titan_writel(0x0000ff3f, CPDST1A); - titan_writel(0x00000000, CPDST1B); - titan_writel(0x00ffffff, CPXDSTA); - titan_writel(0x00000000, CPXDSTB); -#endif - - /* Enable DUART interrupts, disable everything else. */ - titan_writel(0x04000000, CPGIG0ER); - titan_writel(0x000000c0, CPGIG1ER); - - excite_procfs_init(); - return 0; -} - -void __init plat_mem_setup(void) -{ - volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000; - - /* Announce RAM to system */ - add_memory_region(0x00000000, memsize, BOOT_MEM_RAM); - - /* Set up the peripheral address map */ - *(boot_ocd_base + (LKB9 / sizeof(u32))) = 0; - *(boot_ocd_base + (LKB10 / sizeof(u32))) = 0; - *(boot_ocd_base + (LKB11 / sizeof(u32))) = 0; - *(boot_ocd_base + (LKB12 / sizeof(u32))) = 0; - wmb(); - *(boot_ocd_base + (LKB0 / sizeof(u32))) = EXCITE_PHYS_OCD >> 4; - wmb(); - - ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5); - ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5); - ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13); - ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13); - - /* Local bus slot #0 */ - ocd_writel(0x00040510, LDP0); - ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9); - ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9); - - /* Local bus slot #2 */ - ocd_writel(0x00000330, LDP2); - ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11); - ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11); - - /* Local bus slot #3 */ - ocd_writel(0x00123413, LDP3); - ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12); - ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12); -} - - - -console_initcall(excite_init_console); -arch_initcall(excite_platform_init); - -EXPORT_SYMBOL(titan_lock); -EXPORT_SYMBOL(titan_irqflags); -EXPORT_SYMBOL(titan_irq); -EXPORT_SYMBOL(ocd_base); -EXPORT_SYMBOL(titan_base); diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig index 2cb304a226ad..1d5ec3c11c75 100644 --- a/arch/mips/configs/ar7_defconfig +++ b/arch/mips/configs/ar7_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set CONFIG_AR7=y -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index 94b7d57f906d..8715de1d8092 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set CONFIG_BCM47XX=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig index ea00c18d1f7b..efa65982239e 100644 --- a/arch/mips/configs/bcm63xx_defconfig +++ b/arch/mips/configs/bcm63xx_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set CONFIG_BCM63XX=y # CONFIG_MIPS_COBALT is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 13d9eb4736c0..1f0228d6f16e 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 185df23fd460..be81bf68e170 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/cavium-octeon_defconfig b/arch/mips/configs/cavium-octeon_defconfig index 1819a4c907ba..22819d9c683a 100644 --- a/arch/mips/configs/cavium-octeon_defconfig +++ b/arch/mips/configs/cavium-octeon_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 6c8cca8589ba..b15028693785 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index dbdf3bb1a34a..63cdea202911 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index fa6814475898..7ae0f9a1704d 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index d73f1de43b5d..a6d9e1f48bba 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y # CONFIG_MIPS_DB1550 is not set CONFIG_MIPS_DB1200=y # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index ec3e028a5b2e..a3a462b1f4e2 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 7631dae51be9..bfc962ed35b2 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y CONFIG_MIPS_DB1550=y # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 9e65e6a2dcb3..7eb6d1b4e322 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set CONFIG_MACH_DECSTATION=y # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 1bd84d42b14f..c6b1d6b29dfc 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig deleted file mode 100644 index 1995d43a2ed1..000000000000 --- a/arch/mips/configs/excite_defconfig +++ /dev/null @@ -1,1335 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:31 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -CONFIG_BASLER_EXCITE=y -# CONFIG_BASLER_EXCITE_PROTOTYPE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_DMA_COHERENT=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_CPU_RM7K=y -CONFIG_IRQ_CPU_RM9K=y -CONFIG_MIPS_RM9122=y -CONFIG_SERIAL_RM9000=y -CONFIG_GPI_RM9000=y -CONFIG_WDT_RM9000=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -CONFIG_CPU_RM9000=y -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_RM9000=y -CONFIG_WEAK_ORDERING=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_BASLER_EXCITE is not set -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_TGT=m -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_WDT_RM9K_GPI=m - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_SMIVGX is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=m -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -# CONFIG_CRYPTO_HMAC is not set -CONFIG_CRYPTO_XCBC=m -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -# CONFIG_CRYPTO_DES is not set -CONFIG_CRYPTO_FCRYPT=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index b3626deb018d..17341a0b4695 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index f14d38ba6034..3471ac9ab9db 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 1fc73aa7b509..26127a8dd25d 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig index 539dccb0345d..ac6c850957f3 100644 --- a/arch/mips/configs/ip28_defconfig +++ b/arch/mips/configs/ip28_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index d934bdefb393..56553b1a821c 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index d22df61833a8..9db23fdffd9e 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set CONFIG_MACH_JAZZ=y diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 5380f1f582d9..11fec0e8a792 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig index 044074db7e55..2fe15a5bfed8 100644 --- a/arch/mips/configs/lasat_defconfig +++ b/arch/mips/configs/lasat_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index 89e88a0753dc..ddb1c92b6f06 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 3f01870b4d65..38d98739b165 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # CONFIG_ZONE_DMA=y # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig index d001f7e87418..91375718082d 100644 --- a/arch/mips/configs/markeins_defconfig +++ b/arch/mips/configs/markeins_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 7358454deaa6..513e9a416fee 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 8c720e51795b..b893f9d13790 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index ecbc030b7b6c..89d2b6a9475c 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 9477f040796d..319966898555 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # CONFIG_MACH_ALCHEMY=y -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index be8091ef0a79..c36e859ad811 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index e74ba794c789..4b43e36fa1fe 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 1d896fd830da..7c8d351ad1cc 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig index fef4d31c2055..77a75f011973 100644 --- a/arch/mips/configs/pnx8335-stb225_defconfig +++ b/arch/mips/configs/pnx8335-stb225_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index e10c7116c3c2..945b27e13324 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index 5ed3c8dfa0a1..ff0fc0bedb2f 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig index 3aff69ab6c32..86c8007c1743 100644 --- a/arch/mips/configs/powertv_defconfig +++ b/arch/mips/configs/powertv_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig index f40c3a04739d..a9408dbe0d2a 100644 --- a/arch/mips/configs/rb532_defconfig +++ b/arch/mips/configs/rb532_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index 4f3b970006fc..1c9a5428aeab 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index e53b8d096cfc..5873fc50005e 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 7f38c0b956f3..5244716b67fc 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index b5059881bc7e..937b47cbb4a8 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index b06a716bf23f..da7358404904 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 46512cf7ce04..99a0d21b8b22 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index b437eb7f8672..d3646ea51c21 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index 06acc7482e4c..c137831cc6a1 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 69feaf88b510..4a04f0c1fa86 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h deleted file mode 100644 index 107104c3cd12..000000000000 --- a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 Thomas Koeller - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H - -/* - * Basler eXcite has an RM9122 processor. - */ -#define cpu_has_watch 1 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_icache_snoops_remote_store 0 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_inclusive_pcaches 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 -#define cpu_scache_line_size() 32 - -#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-excite/excite.h b/arch/mips/include/asm/mach-excite/excite.h deleted file mode 100644 index 4c29ba44992c..000000000000 --- a/arch/mips/include/asm/mach-excite/excite.h +++ /dev/null @@ -1,154 +0,0 @@ -#ifndef __EXCITE_H__ -#define __EXCITE_H__ - -#include -#include -#include - -#define EXCITE_CPU_EXT_CLOCK 100000000 - -#if !defined(__ASSEMBLY__) -void __init excite_kgdb_init(void); -void excite_procfs_init(void); -extern unsigned long memsize; -extern char modetty[]; -extern u32 unit_id; -#endif - -/* Base name for XICAP devices */ -#define XICAP_NAME "xicap_gpi" - -/* OCD register offsets */ -#define LKB0 0x0038 -#define LKB5 0x0128 -#define LKM5 0x012C -#define LKB7 0x0138 -#define LKM7 0x013c -#define LKB8 0x0140 -#define LKM8 0x0144 -#define LKB9 0x0148 -#define LKM9 0x014c -#define LKB10 0x0150 -#define LKM10 0x0154 -#define LKB11 0x0158 -#define LKM11 0x015c -#define LKB12 0x0160 -#define LKM12 0x0164 -#define LKB13 0x0168 -#define LKM13 0x016c -#define LDP0 0x0200 -#define LDP1 0x0210 -#define LDP2 0x0220 -#define LDP3 0x0230 -#define INTPIN0 0x0A40 -#define INTPIN1 0x0A44 -#define INTPIN2 0x0A48 -#define INTPIN3 0x0A4C -#define INTPIN4 0x0A50 -#define INTPIN5 0x0A54 -#define INTPIN6 0x0A58 -#define INTPIN7 0x0A5C - - - - -/* TITAN register offsets */ -#define CPRR 0x0004 -#define CPDSR 0x0008 -#define CPTC0R 0x000c -#define CPTC1R 0x0010 -#define CPCFG0 0x0020 -#define CPCFG1 0x0024 -#define CPDST0A 0x0028 -#define CPDST0B 0x002c -#define CPDST1A 0x0030 -#define CPDST1B 0x0034 -#define CPXDSTA 0x0038 -#define CPXDSTB 0x003c -#define CPXCISRA 0x0048 -#define CPXCISRB 0x004c -#define CPGIG0ER 0x0050 -#define CPGIG1ER 0x0054 -#define CPGRWL 0x0068 -#define CPURSLMT 0x00f8 -#define UACFG 0x0200 -#define UAINTS 0x0204 -#define SDRXFCIE 0x4828 -#define SDTXFCIE 0x4928 -#define INTP0Status0 0x1B00 -#define INTP0Mask0 0x1B04 -#define INTP0Set0 0x1B08 -#define INTP0Clear0 0x1B0C -#define GXCFG 0x5000 -#define GXDMADRPFX 0x5018 -#define GXDMA_DESCADR 0x501c -#define GXCH0TDESSTRT 0x5054 - -/* IRQ definitions */ -#define NMICONFIG 0xac0 -#define TITAN_MSGINT 0xc4 -#define TITAN_IRQ ((TITAN_MSGINT / 0x20) + 2) -#define FPGA0_MSGINT 0x5a -#define FPGA0_IRQ ((FPGA0_MSGINT / 0x20) + 2) -#define FPGA1_MSGINT 0x7b -#define FPGA1_IRQ ((FPGA1_MSGINT / 0x20) + 2) -#define PHY_MSGINT 0x9c -#define PHY_IRQ ((PHY_MSGINT / 0x20) + 2) - -#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE) -/* Pre-release units used interrupt pin #9 */ -#define USB_IRQ 11 -#else -/* Re-designed units use interrupt pin #1 */ -#define USB_MSGINT 0x39 -#define USB_IRQ ((USB_MSGINT / 0x20) + 2) -#endif -#define TIMER_IRQ 12 - - -/* Device address ranges */ -#define EXCITE_OFFS_OCD 0x1fffc000 -#define EXCITE_SIZE_OCD (16 * 1024) -#define EXCITE_PHYS_OCD CPHYSADDR(EXCITE_OFFS_OCD) -#define EXCITE_ADDR_OCD CKSEG1ADDR(EXCITE_OFFS_OCD) - -#define EXCITE_OFFS_SCRAM 0x1fffa000 -#define EXCITE_SIZE_SCRAM (8 << 10) -#define EXCITE_PHYS_SCRAM CPHYSADDR(EXCITE_OFFS_SCRAM) -#define EXCITE_ADDR_SCRAM CKSEG1ADDR(EXCITE_OFFS_SCRAM) - -#define EXCITE_OFFS_PCI_IO 0x1fff8000 -#define EXCITE_SIZE_PCI_IO (8 << 10) -#define EXCITE_PHYS_PCI_IO CPHYSADDR(EXCITE_OFFS_PCI_IO) -#define EXCITE_ADDR_PCI_IO CKSEG1ADDR(EXCITE_OFFS_PCI_IO) - -#define EXCITE_OFFS_TITAN 0x1fff0000 -#define EXCITE_SIZE_TITAN (32 << 10) -#define EXCITE_PHYS_TITAN CPHYSADDR(EXCITE_OFFS_TITAN) -#define EXCITE_ADDR_TITAN CKSEG1ADDR(EXCITE_OFFS_TITAN) - -#define EXCITE_OFFS_PCI_MEM 0x1ffe0000 -#define EXCITE_SIZE_PCI_MEM (64 << 10) -#define EXCITE_PHYS_PCI_MEM CPHYSADDR(EXCITE_OFFS_PCI_MEM) -#define EXCITE_ADDR_PCI_MEM CKSEG1ADDR(EXCITE_OFFS_PCI_MEM) - -#define EXCITE_OFFS_FPGA 0x1ffdc000 -#define EXCITE_SIZE_FPGA (16 << 10) -#define EXCITE_PHYS_FPGA CPHYSADDR(EXCITE_OFFS_FPGA) -#define EXCITE_ADDR_FPGA CKSEG1ADDR(EXCITE_OFFS_FPGA) - -#define EXCITE_OFFS_NAND 0x1ffd8000 -#define EXCITE_SIZE_NAND (16 << 10) -#define EXCITE_PHYS_NAND CPHYSADDR(EXCITE_OFFS_NAND) -#define EXCITE_ADDR_NAND CKSEG1ADDR(EXCITE_OFFS_NAND) - -#define EXCITE_OFFS_BOOTROM 0x1f000000 -#define EXCITE_SIZE_BOOTROM (8 << 20) -#define EXCITE_PHYS_BOOTROM CPHYSADDR(EXCITE_OFFS_BOOTROM) -#define EXCITE_ADDR_BOOTROM CKSEG1ADDR(EXCITE_OFFS_BOOTROM) - -/* FPGA address offsets */ -#define EXCITE_FPGA_DPR 0x0104 /* dual-ported ram */ -#define EXCITE_FPGA_SYSCTL 0x0200 /* system control register block */ - -#endif /* __EXCITE_H__ */ diff --git a/arch/mips/include/asm/mach-excite/excite_fpga.h b/arch/mips/include/asm/mach-excite/excite_fpga.h deleted file mode 100644 index 0a1ef69bece7..000000000000 --- a/arch/mips/include/asm/mach-excite/excite_fpga.h +++ /dev/null @@ -1,80 +0,0 @@ -#ifndef EXCITE_FPGA_H_INCLUDED -#define EXCITE_FPGA_H_INCLUDED - - -/** - * Address alignment of the individual FPGA bytes. - * The address arrangement of the individual bytes of the FPGA is two - * byte aligned at the embedded MK2 platform. - */ -#ifdef EXCITE_CCI_FPGA_MK2 -typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2))); -#else -typedef unsigned char excite_cci_fpga_align_t; -#endif - - -/** - * Size of Dual Ported RAM. - */ -#define EXCITE_DPR_SIZE 263 - - -/** - * Size of Reserved Status Fields in Dual Ported RAM. - */ -#define EXCITE_DPR_STATUS_SIZE 7 - - - -/** - * FPGA. - * Hardware register layout of the FPGA interface. The FPGA must accessed - * byte wise solely. - * @see EXCITE_CCI_DPR_MK2 - */ -typedef struct excite_fpga { - - /** - * Dual Ported RAM. - */ - excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE]; - - /** - * Status. - */ - excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE]; - -#ifdef EXCITE_CCI_FPGA_MK2 - /** - * RM9000 Interrupt. - * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite. - */ - excite_cci_fpga_align_t rm9k_int; -#else - /** - * MK2 Interrupt. - * Write access initiates interrupt at the ARM processor of the MK2. - */ - excite_cci_fpga_align_t mk2_int; - - excite_cci_fpga_align_t gap[0x1000-0x10f]; - - /** - * IRQ Source/Acknowledge. - */ - excite_cci_fpga_align_t rm9k_irq_src; - - /** - * IRQ Mask. - * Set bits enable the related interrupt. - */ - excite_cci_fpga_align_t rm9k_irq_mask; -#endif - - -} excite_fpga; - - - -#endif /* ndef EXCITE_FPGA_H_INCLUDED */ diff --git a/arch/mips/include/asm/mach-excite/excite_nandflash.h b/arch/mips/include/asm/mach-excite/excite_nandflash.h deleted file mode 100644 index c4cf6140622e..000000000000 --- a/arch/mips/include/asm/mach-excite/excite_nandflash.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __EXCITE_NANDFLASH_H__ -#define __EXCITE_NANDFLASH_H__ - -/* Resource names */ -#define EXCITE_NANDFLASH_RESOURCE_REGS "excite_nandflash_regs" - -#endif /* __EXCITE_NANDFLASH_H__ */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_eth.h b/arch/mips/include/asm/mach-excite/rm9k_eth.h deleted file mode 100644 index 94705a46f72e..000000000000 --- a/arch/mips/include/asm/mach-excite/rm9k_eth.h +++ /dev/null @@ -1,23 +0,0 @@ -#if !defined(__RM9K_ETH_H__) -#define __RM9K_ETH_H__ - -#define RM9K_GE_NAME "rm9k_ge" - -/* Resource names */ -#define RM9K_GE_RESOURCE_MAC "rm9k_ge_mac" -#define RM9K_GE_RESOURCE_MSTAT "rm9k_ge_mstat" -#define RM9K_GE_RESOURCE_PKTPROC "rm9k_ge_pktproc" -#define RM9K_GE_RESOURCE_XDMA "rm9k_ge_xdma" -#define RM9K_GE_RESOURCE_FIFO_RX "rm9k_ge_fifo_rx" -#define RM9K_GE_RESOURCE_FIFO_TX "rm9k_ge_fifo_tx" -#define RM9K_GE_RESOURCE_FIFOMEM_RX "rm9k_ge_fifo_memory_rx" -#define RM9K_GE_RESOURCE_FIFOMEM_TX "rm9k_ge_fifo_memory_tx" -#define RM9K_GE_RESOURCE_PHY "rm9k_ge_phy" -#define RM9K_GE_RESOURCE_DMADESC_RX "rm9k_ge_dmadesc_rx" -#define RM9K_GE_RESOURCE_DMADESC_TX "rm9k_ge_dmadesc_tx" -#define RM9K_GE_RESOURCE_IRQ_MAIN "rm9k_ge_irq_main" -#define RM9K_GE_RESOURCE_IRQ_PHY "rm9k_ge_irq_phy" -#define RM9K_GE_RESOURCE_GPI_SLICE "rm9k_ge_gpi_slice" -#define RM9K_GE_RESOURCE_MDIO_CHANNEL "rm9k_ge_mdio_channel" - -#endif /* !defined(__RM9K_ETH_H__) */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_wdt.h b/arch/mips/include/asm/mach-excite/rm9k_wdt.h deleted file mode 100644 index 3fa3c08d2da7..000000000000 --- a/arch/mips/include/asm/mach-excite/rm9k_wdt.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __RM9K_WDT_H__ -#define __RM9K_WDT_H__ - -/* Device name */ -#define WDT_NAME "wdt_gpi" - -/* Resource names */ -#define WDT_RESOURCE_REGS "excite_watchdog_regs" -#define WDT_RESOURCE_IRQ "excite_watchdog_irq" -#define WDT_RESOURCE_COUNTER "excite_watchdog_counter" - -#endif /* __RM9K_WDT_H__ */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_xicap.h b/arch/mips/include/asm/mach-excite/rm9k_xicap.h deleted file mode 100644 index 009577734a8d..000000000000 --- a/arch/mips/include/asm/mach-excite/rm9k_xicap.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __EXCITE_XICAP_H__ -#define __EXCITE_XICAP_H__ - - -/* Resource names */ -#define XICAP_RESOURCE_FIFO_RX "xicap_fifo_rx" -#define XICAP_RESOURCE_FIFO_TX "xicap_fifo_tx" -#define XICAP_RESOURCE_XDMA "xicap_xdma" -#define XICAP_RESOURCE_DMADESC "xicap_dmadesc" -#define XICAP_RESOURCE_PKTPROC "xicap_pktproc" -#define XICAP_RESOURCE_IRQ "xicap_irq" -#define XICAP_RESOURCE_GPI_SLICE "xicap_gpi_slice" -#define XICAP_RESOURCE_FIFO_BLK "xicap_fifo_blocks" -#define XICAP_RESOURCE_PKT_STREAM "xicap_pkt_stream" - -#endif /* __EXCITE_XICAP_H__ */ diff --git a/arch/mips/include/asm/mach-excite/war.h b/arch/mips/include/asm/mach-excite/war.h deleted file mode 100644 index 1f82180c1598..000000000000 --- a/arch/mips/include/asm/mach-excite/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H -#define __ASM_MIPS_MACH_EXCITE_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 1 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */ diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index c9a0dc122237..c9209ca6c8e7 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -22,7 +22,6 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ # # These are still pretty much in the old state, watch, go blind. # -obj-$(CONFIG_BASLER_EXCITE) += ops-titan.o pci-excite.o fixup-excite.o obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o diff --git a/arch/mips/pci/fixup-excite.c b/arch/mips/pci/fixup-excite.c deleted file mode 100644 index cd64d9f177c4..000000000000 --- a/arch/mips/pci/fixup-excite.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (pin == 0) - return -1; - - return USB_IRQ; /* USB controller is the only PCI device */ -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/pci-excite.c b/arch/mips/pci/pci-excite.c deleted file mode 100644 index 8a56876afcc6..000000000000 --- a/arch/mips/pci/pci-excite.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include - - -extern struct pci_ops titan_pci_ops; - - -static struct resource - mem_resource = { - .name = "PCI memory", - .start = EXCITE_PHYS_PCI_MEM, - .end = EXCITE_PHYS_PCI_MEM + EXCITE_SIZE_PCI_MEM - 1, - .flags = IORESOURCE_MEM - }, - io_resource = { - .name = "PCI I/O", - .start = EXCITE_PHYS_PCI_IO, - .end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1, - .flags = IORESOURCE_IO - }; - - -static struct pci_controller bx_controller = { - .pci_ops = &titan_pci_ops, - .mem_resource = &mem_resource, - .mem_offset = 0x00000000UL, - .io_resource = &io_resource, - .io_offset = 0x00000000UL -}; - - -static char - iopage_failed[] __initdata = "Cannot allocate PCI I/O page", - modebits_no_pci[] __initdata = "PCI is not configured in mode bits"; - -#define RM9000x2_OCD_HTSC 0x0604 -#define RM9000x2_OCD_HTBHL 0x060c -#define RM9000x2_OCD_PCIHRST 0x078c - -#define RM9K_OCD_MODEBIT1 0x00d4 /* (MODEBIT1) Mode Bit 1 */ -#define RM9K_OCD_CPHDCR 0x00f4 /* CPU-PCI/HT Data Control. */ - -#define PCISC_FB2B 0x00000200 -#define PCISC_MWICG 0x00000010 -#define PCISC_EMC 0x00000004 -#define PCISC_ERMA 0x00000002 - - - -static int __init basler_excite_pci_setup(void) -{ - const unsigned int fullbars = memsize / (256 << 20); - unsigned int i; - - /* Check modebits to see if PCI is really enabled. */ - if (!((ocd_readl(RM9K_OCD_MODEBIT1) >> (47-32)) & 0x1)) - panic(modebits_no_pci); - - if (NULL == request_mem_region(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO, - "Memory-mapped PCI I/O page")) - panic(iopage_failed); - - /* Enable PCI 0 as master for config cycles */ - ocd_writel(PCISC_EMC | PCISC_ERMA, RM9000x2_OCD_HTSC); - - - /* Set up latency timer */ - ocd_writel(0x8008, RM9000x2_OCD_HTBHL); - - /* Setup host IO and Memory space */ - ocd_writel((EXCITE_PHYS_PCI_IO >> 4) | 1, LKB7); - ocd_writel(((EXCITE_SIZE_PCI_IO >> 4) & 0x7fffff00) - 0x100, LKM7); - ocd_writel((EXCITE_PHYS_PCI_MEM >> 4) | 1, LKB8); - ocd_writel(((EXCITE_SIZE_PCI_MEM >> 4) & 0x7fffff00) - 0x100, LKM8); - - /* Set up PCI BARs to map all installed memory */ - for (i = 0; i < 6; i++) { - const unsigned int bar = 0x610 + i * 4; - - if (i < fullbars) { - ocd_writel(0x10000000 * i, bar); - ocd_writel(0x01000000 * i, bar + 0x140); - ocd_writel(0x0ffff029, bar + 0x100); - continue; - } - - if (i == fullbars) { - int o; - u32 mask; - - const unsigned long rem = memsize - i * 0x10000000; - if (!rem) { - ocd_writel(0x00000000, bar + 0x100); - continue; - } - - o = ffs(rem) - 1; - if (rem & ~(0x1 << o)) - o++; - mask = ((0x1 << o) & 0x0ffff000) - 0x1000; - ocd_writel(0x10000000 * i, bar); - ocd_writel(0x01000000 * i, bar + 0x140); - ocd_writel(0x00000029 | mask, bar + 0x100); - continue; - } - - ocd_writel(0x00000000, bar + 0x100); - } - - /* Finally, enable the PCI interrupt */ -#if USB_IRQ > 7 - set_c0_intcontrol(1 << USB_IRQ); -#else - set_c0_status(1 << (USB_IRQ + 8)); -#endif - - ioport_resource.start = EXCITE_PHYS_PCI_IO; - ioport_resource.end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1; - set_io_port_base((unsigned long) ioremap_nocache(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO)); - register_pci_controller(&bx_controller); - return 0; -} - - -arch_initcall(basler_excite_pci_setup); diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 7678538344f4..677cd53f18c3 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -291,14 +291,6 @@ config MTD_NAND_SHARPSL tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" depends on ARCH_PXA -config MTD_NAND_BASLER_EXCITE - tristate "Support for NAND Flash on Basler eXcite" - depends on BASLER_EXCITE - help - This enables the driver for the NAND flash device found on the - Basler eXcite Smart Camera. If built as a module, the driver - will be named excite_nandflash. - config MTD_NAND_CAFE tristate "NAND support for OLPC CAFÉ chip" depends on PCI diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 460a1f39a8d1..1407bd144015 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o -obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c deleted file mode 100644 index af6a6a5399e1..000000000000 --- a/drivers/mtd/nand/excite_nandflash.c +++ /dev/null @@ -1,248 +0,0 @@ -/* -* Copyright (C) 2005 - 2007 by Basler Vision Technologies AG -* Author: Thomas Koeller -* Original code by Thies Moeller -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include - -#define EXCITE_NANDFLASH_VERSION "0.1" - -/* I/O register offsets */ -#define EXCITE_NANDFLASH_DATA_BYTE 0x00 -#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c -#define EXCITE_NANDFLASH_ADDR_BYTE 0x10 -#define EXCITE_NANDFLASH_CMD_BYTE 0x14 - -/* prefix for debug output */ -static const char module_id[] = "excite_nandflash"; - -/* - * partition definition - */ -static const struct mtd_partition partition_info[] = { - { - .name = "eXcite RootFS", - .offset = 0, - .size = MTDPART_SIZ_FULL - } -}; - -static inline const struct resource * -excite_nand_get_resource(struct platform_device *d, unsigned long flags, - const char *basename) -{ - char buf[80]; - - if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf) - return NULL; - return platform_get_resource_byname(d, flags, buf); -} - -static inline void __iomem * -excite_nand_map_regs(struct platform_device *d, const char *basename) -{ - void *result = NULL; - const struct resource *const r = - excite_nand_get_resource(d, IORESOURCE_MEM, basename); - - if (r) - result = ioremap_nocache(r->start, r->end + 1 - r->start); - return result; -} - -/* controller and mtd information */ -struct excite_nand_drvdata { - struct mtd_info board_mtd; - struct nand_chip board_chip; - void __iomem *regs; - void __iomem *tgt; -}; - -/* Control function */ -static void excite_nand_control(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct excite_nand_drvdata * const d = - container_of(mtd, struct excite_nand_drvdata, board_mtd); - - switch (ctrl) { - case NAND_CTRL_CHANGE | NAND_CTRL_CLE: - d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE; - break; - case NAND_CTRL_CHANGE | NAND_CTRL_ALE: - d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE; - break; - case NAND_CTRL_CHANGE | NAND_NCE: - d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE; - break; - } - - if (cmd != NAND_CMD_NONE) - __raw_writeb(cmd, d->tgt); -} - -/* Return 0 if flash is busy, 1 if ready */ -static int excite_nand_devready(struct mtd_info *mtd) -{ - struct excite_nand_drvdata * const drvdata = - container_of(mtd, struct excite_nand_drvdata, board_mtd); - - return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE); -} - -/* - * Called by device layer to remove the driver. - * The binding to the mtd and all allocated - * resources are released. - */ -static int __devexit excite_nand_remove(struct platform_device *dev) -{ - struct excite_nand_drvdata * const this = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); - - if (unlikely(!this)) { - printk(KERN_ERR "%s: called %s without private data!!", - module_id, __func__); - return -EINVAL; - } - - /* first thing we need to do is release our mtd - * then go through freeing the resource used - */ - nand_release(&this->board_mtd); - - /* free the common resources */ - iounmap(this->regs); - kfree(this); - - DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id); - return 0; -} - -/* - * Called by device layer when it finds a device matching - * one our driver can handle. This code checks to see if - * it can allocate all necessary resources then calls the - * nand layer to look for devices. -*/ -static int __init excite_nand_probe(struct platform_device *pdev) -{ - struct excite_nand_drvdata *drvdata; /* private driver data */ - struct nand_chip *board_chip; /* private flash chip data */ - struct mtd_info *board_mtd; /* mtd info for this board */ - int scan_res; - - drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); - if (unlikely(!drvdata)) { - printk(KERN_ERR "%s: no memory for drvdata\n", - module_id); - return -ENOMEM; - } - - /* bind private data into driver */ - platform_set_drvdata(pdev, drvdata); - - /* allocate and map the resource */ - drvdata->regs = - excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS); - - if (unlikely(!drvdata->regs)) { - printk(KERN_ERR "%s: cannot reserve register region\n", - module_id); - kfree(drvdata); - return -ENXIO; - } - - drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE; - - /* initialise our chip */ - board_chip = &drvdata->board_chip; - board_chip->IO_ADDR_R = board_chip->IO_ADDR_W = - drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE; - board_chip->cmd_ctrl = excite_nand_control; - board_chip->dev_ready = excite_nand_devready; - board_chip->chip_delay = 25; - board_chip->ecc.mode = NAND_ECC_SOFT; - - /* link chip to mtd */ - board_mtd = &drvdata->board_mtd; - board_mtd->priv = board_chip; - - DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id); - scan_res = nand_scan(&drvdata->board_mtd, 1); - - if (likely(!scan_res)) { - DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id); - add_mtd_partitions(&drvdata->board_mtd, partition_info, - ARRAY_SIZE(partition_info)); - } else { - iounmap(drvdata->regs); - kfree(drvdata); - printk(KERN_ERR "%s: device scan failed\n", module_id); - return -EIO; - } - return 0; -} - -static struct platform_driver excite_nand_driver = { - .driver = { - .name = "excite_nand", - .owner = THIS_MODULE, - }, - .probe = excite_nand_probe, - .remove = __devexit_p(excite_nand_remove) -}; - -static int __init excite_nand_init(void) -{ - pr_info("Basler eXcite nand flash driver Version " - EXCITE_NANDFLASH_VERSION "\n"); - return platform_driver_register(&excite_nand_driver); -} - -static void __exit excite_nand_exit(void) -{ - platform_driver_unregister(&excite_nand_driver); -} - -module_init(excite_nand_init); -module_exit(excite_nand_exit); - -MODULE_AUTHOR("Thomas Koeller "); -MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(EXCITE_NANDFLASH_VERSION) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index d958b76430a2..da84fd03850f 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -815,16 +815,6 @@ config PNX833X_WDT timer has expired and no process has written to /dev/watchdog during that time. -config WDT_RM9K_GPI - tristate "RM9000/GPI hardware watchdog" - depends on CPU_RM9000 - help - Watchdog implementation using the GPI hardware found on - PMC-Sierra RM9xxx CPUs. - - To compile this driver as a module, choose M here: the - module will be called rm9k_wdt. - config SIBYTE_WDOG tristate "Sibyte SoC hardware watchdog" depends on CPU_SB1 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 89c045dc468e..475c61100069 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -109,7 +109,6 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o obj-$(CONFIG_INDYDOG) += indydog.o obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o -obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o obj-$(CONFIG_AR7_WDT) += ar7_wdt.o obj-$(CONFIG_TXX9_WDT) += txx9wdt.o diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c deleted file mode 100644 index bb66958b9433..000000000000 --- a/drivers/watchdog/rm9k_wdt.c +++ /dev/null @@ -1,419 +0,0 @@ -/* - * Watchdog implementation for GPI h/w found on PMC-Sierra RM9xxx - * chips. - * - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - - -#define CLOCK 125000000 -#define MAX_TIMEOUT_SECONDS 32 -#define CPCCR 0x0080 -#define CPGIG1SR 0x0044 -#define CPGIG1ER 0x0054 - - -/* Function prototypes */ -static irqreturn_t wdt_gpi_irqhdl(int, void *); -static void wdt_gpi_start(void); -static void wdt_gpi_stop(void); -static void wdt_gpi_set_timeout(unsigned int); -static int wdt_gpi_open(struct inode *, struct file *); -static int wdt_gpi_release(struct inode *, struct file *); -static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t, - loff_t *); -static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long); -static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *); -static const struct resource *wdt_gpi_get_resource(struct platform_device *, - const char *, unsigned int); -static int __init wdt_gpi_probe(struct platform_device *); -static int __exit wdt_gpi_remove(struct platform_device *); - - -static const char wdt_gpi_name[] = "wdt_gpi"; -static atomic_t opencnt; -static int expect_close; -static int locked; - - -/* These are set from device resources */ -static void __iomem *wd_regs; -static unsigned int wd_irq, wd_ctr; - - -/* Module arguments */ -static int timeout = MAX_TIMEOUT_SECONDS; -module_param(timeout, int, 0444); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds"); - -static unsigned long resetaddr = 0xbffdc200; -module_param(resetaddr, ulong, 0444); -MODULE_PARM_DESC(resetaddr, "Address to write to to force a reset"); - -static unsigned long flagaddr = 0xbffdc104; -module_param(flagaddr, ulong, 0444); -MODULE_PARM_DESC(flagaddr, "Address to write to boot flags to"); - -static int powercycle; -module_param(powercycle, bool, 0444); -MODULE_PARM_DESC(powercycle, "Cycle power if watchdog expires"); - -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, bool, 0444); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started"); - - -/* Kernel interfaces */ -static const struct file_operations fops = { - .owner = THIS_MODULE, - .open = wdt_gpi_open, - .release = wdt_gpi_release, - .write = wdt_gpi_write, - .unlocked_ioctl = wdt_gpi_ioctl, -}; - -static struct miscdevice miscdev = { - .minor = WATCHDOG_MINOR, - .name = wdt_gpi_name, - .fops = &fops, -}; - -static struct notifier_block wdt_gpi_shutdown = { - .notifier_call = wdt_gpi_notify, -}; - - -/* Interrupt handler */ -static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt) -{ - if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1)) - return IRQ_NONE; - __raw_writel(0x1, wd_regs + 0x0008); - - - printk(KERN_CRIT "%s: watchdog expired - resetting system\n", - wdt_gpi_name); - - *(volatile char *) flagaddr |= 0x01; - *(volatile char *) resetaddr = powercycle ? 0x01 : 0x2; - iob(); - while (1) - cpu_relax(); -} - - -/* Watchdog functions */ -static void wdt_gpi_start(void) -{ - u32 reg; - - lock_titan_regs(); - reg = titan_readl(CPGIG1ER); - titan_writel(reg | (0x100 << wd_ctr), CPGIG1ER); - iob(); - unlock_titan_regs(); -} - -static void wdt_gpi_stop(void) -{ - u32 reg; - - lock_titan_regs(); - reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4)); - titan_writel(reg, CPCCR); - reg = titan_readl(CPGIG1ER); - titan_writel(reg & ~(0x100 << wd_ctr), CPGIG1ER); - iob(); - unlock_titan_regs(); -} - -static void wdt_gpi_set_timeout(unsigned int to) -{ - u32 reg; - const u32 wdval = (to * CLOCK) & ~0x0000000f; - - lock_titan_regs(); - reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4)); - titan_writel(reg, CPCCR); - wmb(); - __raw_writel(wdval, wd_regs + 0x0000); - wmb(); - titan_writel(reg | (0x2 << (wd_ctr * 4)), CPCCR); - wmb(); - titan_writel(reg | (0x5 << (wd_ctr * 4)), CPCCR); - iob(); - unlock_titan_regs(); -} - - -/* /dev/watchdog operations */ -static int wdt_gpi_open(struct inode *inode, struct file *file) -{ - int res; - - if (unlikely(atomic_dec_if_positive(&opencnt) < 0)) - return -EBUSY; - - expect_close = 0; - if (locked) { - module_put(THIS_MODULE); - free_irq(wd_irq, &miscdev); - locked = 0; - } - - res = request_irq(wd_irq, wdt_gpi_irqhdl, IRQF_SHARED | IRQF_DISABLED, - wdt_gpi_name, &miscdev); - if (unlikely(res)) - return res; - - wdt_gpi_set_timeout(timeout); - wdt_gpi_start(); - - printk(KERN_INFO "%s: watchdog started, timeout = %u seconds\n", - wdt_gpi_name, timeout); - return nonseekable_open(inode, file); -} - -static int wdt_gpi_release(struct inode *inode, struct file *file) -{ - if (nowayout) { - printk(KERN_INFO "%s: no way out - watchdog left running\n", - wdt_gpi_name); - __module_get(THIS_MODULE); - locked = 1; - } else { - if (expect_close) { - wdt_gpi_stop(); - free_irq(wd_irq, &miscdev); - printk(KERN_INFO "%s: watchdog stopped\n", - wdt_gpi_name); - } else { - printk(KERN_CRIT "%s: unexpected close() -" - " watchdog left running\n", - wdt_gpi_name); - wdt_gpi_set_timeout(timeout); - __module_get(THIS_MODULE); - locked = 1; - } - } - - atomic_inc(&opencnt); - return 0; -} - -static ssize_t wdt_gpi_write(struct file *f, const char __user *d, size_t s, - loff_t *o) -{ - char val; - - wdt_gpi_set_timeout(timeout); - expect_close = (s > 0) && !get_user(val, d) && (val == 'V'); - return s ? 1 : 0; -} - -static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) -{ - long res = -ENOTTY; - const long size = _IOC_SIZE(cmd); - int stat; - void __user *argp = (void __user *)arg; - static struct watchdog_info wdinfo = { - .identity = "RM9xxx/GPI watchdog", - .firmware_version = 0, - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING - }; - - if (unlikely(_IOC_TYPE(cmd) != WATCHDOG_IOCTL_BASE)) - return -ENOTTY; - - if ((_IOC_DIR(cmd) & _IOC_READ) - && !access_ok(VERIFY_WRITE, arg, size)) - return -EFAULT; - - if ((_IOC_DIR(cmd) & _IOC_WRITE) - && !access_ok(VERIFY_READ, arg, size)) - return -EFAULT; - - expect_close = 0; - - switch (cmd) { - case WDIOC_GETSUPPORT: - wdinfo.options = nowayout ? - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING : - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | - WDIOF_MAGICCLOSE; - res = __copy_to_user(argp, &wdinfo, size) ? -EFAULT : size; - break; - - case WDIOC_GETSTATUS: - break; - - case WDIOC_GETBOOTSTATUS: - stat = (*(volatile char *) flagaddr & 0x01) - ? WDIOF_CARDRESET : 0; - res = __copy_to_user(argp, &stat, size) ? - -EFAULT : size; - break; - - case WDIOC_SETOPTIONS: - break; - - case WDIOC_KEEPALIVE: - wdt_gpi_set_timeout(timeout); - res = size; - break; - - case WDIOC_SETTIMEOUT: - { - int val; - if (unlikely(__copy_from_user(&val, argp, size))) { - res = -EFAULT; - break; - } - - if (val > MAX_TIMEOUT_SECONDS) - val = MAX_TIMEOUT_SECONDS; - timeout = val; - wdt_gpi_set_timeout(val); - res = size; - printk(KERN_INFO "%s: timeout set to %u seconds\n", - wdt_gpi_name, timeout); - } - break; - - case WDIOC_GETTIMEOUT: - res = __copy_to_user(argp, &timeout, size) ? - -EFAULT : size; - break; - } - - return res; -} - - -/* Shutdown notifier */ -static int wdt_gpi_notify(struct notifier_block *this, unsigned long code, - void *unused) -{ - if (code == SYS_DOWN || code == SYS_HALT) - wdt_gpi_stop(); - - return NOTIFY_DONE; -} - - -/* Init & exit procedures */ -static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv, - const char *name, unsigned int type) -{ - char buf[80]; - if (snprintf(buf, sizeof(buf), "%s_0", name) >= sizeof(buf)) - return NULL; - return platform_get_resource_byname(pdv, type, buf); -} - -/* No hotplugging on the platform bus - use __devinit */ -static int __devinit wdt_gpi_probe(struct platform_device *pdv) -{ - int res; - const struct resource - * const rr = wdt_gpi_get_resource(pdv, WDT_RESOURCE_REGS, - IORESOURCE_MEM), - * const ri = wdt_gpi_get_resource(pdv, WDT_RESOURCE_IRQ, - IORESOURCE_IRQ), - * const rc = wdt_gpi_get_resource(pdv, WDT_RESOURCE_COUNTER, - 0); - - if (unlikely(!rr || !ri || !rc)) - return -ENXIO; - - wd_regs = ioremap_nocache(rr->start, rr->end + 1 - rr->start); - if (unlikely(!wd_regs)) - return -ENOMEM; - wd_irq = ri->start; - wd_ctr = rc->start; - res = misc_register(&miscdev); - if (res) - iounmap(wd_regs); - else - register_reboot_notifier(&wdt_gpi_shutdown); - return res; -} - -static int __devexit wdt_gpi_remove(struct platform_device *dev) -{ - int res; - - unregister_reboot_notifier(&wdt_gpi_shutdown); - res = misc_deregister(&miscdev); - iounmap(wd_regs); - wd_regs = NULL; - return res; -} - - -/* Device driver init & exit */ -static struct platform_driver wgt_gpi_driver = { - .driver = { - .name = wdt_gpi_name, - .owner = THIS_MODULE, - }, - .probe = wdt_gpi_probe, - .remove = __devexit_p(wdt_gpi_remove), -}; - -static int __init wdt_gpi_init_module(void) -{ - atomic_set(&opencnt, 1); - if (timeout > MAX_TIMEOUT_SECONDS) - timeout = MAX_TIMEOUT_SECONDS; - return platform_driver_register(&wdt_gpi_driver); -} - -static void __exit wdt_gpi_cleanup_module(void) -{ - platform_driver_unregister(&wdt_gpi_driver); -} - -module_init(wdt_gpi_init_module); -module_exit(wdt_gpi_cleanup_module); - -MODULE_AUTHOR("Thomas Koeller "); -MODULE_DESCRIPTION("Basler eXcite watchdog driver for gpi devices"); -MODULE_VERSION("0.1"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); - -- GitLab From 6acc7d485c24c00e111c61b2e6dff9180faebcae Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Sat, 21 Nov 2009 22:34:41 +0200 Subject: [PATCH 253/618] MIPS: Fix and enhance built-in kernel command line Currently, MIPS kernels silently overwrite kernel command-line parameters hardcoded in CONFIG_CMDLINE by the ones received from firmware. Therefore, using firmware remains the only reliable method to transfer the command-line parameters, which is not always desirable or convenient, and the CONFIG_CMDLINE option is thereby effectively rendered useless. This patch fixes the problem described above and introduces a more flexible scheme of handling the kernel command line, in a manner identical to what is currently used for x86. The default behavior, i.e. when CONFIG_CMDLINE_BOOL is not defined, retains the existing semantics, and firmware command-line arguments override the hardcoded ones. [Ralf: I fixed up all the defconfig files so the stay unaffected by this change.] Signed-off-by: Dmitri Vorobiev Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/689/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig.debug | 45 ++++++++++++++++++++-- arch/mips/configs/ar7_defconfig | 2 + arch/mips/configs/bcm47xx_defconfig | 2 +- arch/mips/configs/bcm63xx_defconfig | 2 + arch/mips/configs/bigsur_defconfig | 2 +- arch/mips/configs/capcella_defconfig | 2 + arch/mips/configs/cavium-octeon_defconfig | 2 +- arch/mips/configs/cobalt_defconfig | 2 +- arch/mips/configs/db1000_defconfig | 2 +- arch/mips/configs/db1100_defconfig | 2 +- arch/mips/configs/db1200_defconfig | 2 + arch/mips/configs/db1500_defconfig | 2 +- arch/mips/configs/db1550_defconfig | 2 +- arch/mips/configs/decstation_defconfig | 2 +- arch/mips/configs/e55_defconfig | 2 + arch/mips/configs/fuloong2e_defconfig | 2 +- arch/mips/configs/ip22_defconfig | 2 +- arch/mips/configs/ip27_defconfig | 2 +- arch/mips/configs/ip28_defconfig | 2 +- arch/mips/configs/ip32_defconfig | 2 +- arch/mips/configs/jazz_defconfig | 2 +- arch/mips/configs/jmr3927_defconfig | 2 +- arch/mips/configs/lasat_defconfig | 2 +- arch/mips/configs/lemote2f_defconfig | 2 +- arch/mips/configs/malta_defconfig | 2 +- arch/mips/configs/markeins_defconfig | 2 + arch/mips/configs/mipssim_defconfig | 2 + arch/mips/configs/mpc30x_defconfig | 2 + arch/mips/configs/msp71xx_defconfig | 2 +- arch/mips/configs/mtx1_defconfig | 2 +- arch/mips/configs/pb1100_defconfig | 2 +- arch/mips/configs/pb1500_defconfig | 2 +- arch/mips/configs/pb1550_defconfig | 2 +- arch/mips/configs/pnx8335-stb225_defconfig | 2 +- arch/mips/configs/pnx8550-jbs_defconfig | 2 + arch/mips/configs/pnx8550-stb810_defconfig | 2 + arch/mips/configs/powertv_defconfig | 2 + arch/mips/configs/rb532_defconfig | 2 +- arch/mips/configs/rbtx49xx_defconfig | 2 +- arch/mips/configs/rm200_defconfig | 2 +- arch/mips/configs/sb1250-swarm_defconfig | 2 +- arch/mips/configs/tb0219_defconfig | 2 + arch/mips/configs/tb0226_defconfig | 2 + arch/mips/configs/tb0287_defconfig | 2 + arch/mips/configs/workpad_defconfig | 2 + arch/mips/configs/wrppmc_defconfig | 2 + arch/mips/configs/yosemite_defconfig | 2 +- arch/mips/kernel/setup.c | 24 ++++++++++-- 48 files changed, 123 insertions(+), 38 deletions(-) diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 23817bc7a26a..d2b88a0be519 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -20,15 +20,52 @@ config EARLY_PRINTK doesn't cooperate with an X server. You should normally say N here, unless you want to debug such a crash. +config CMDLINE_BOOL + bool "Built-in kernel command line" + default n + help + For most systems, it is firmware or second stage bootloader that + by default specifies the kernel command line options. However, + it might be necessary or advantageous to either override the + default kernel command line or add a few extra options to it. + For such cases, this option allows you to hardcode your own + command line options directly into the kernel. For that, you + should choose 'Y' here, and fill in the extra boot arguments + in CONFIG_CMDLINE. + + The built-in options will be concatenated to the default command + line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default + command line will be ignored and replaced by the built-in string. + + Most MIPS systems will normally expect 'N' here and rely upon + the command line from the firmware or the second-stage bootloader. + config CMDLINE string "Default kernel command string" + depends on CMDLINE_BOOL default "" help On some platforms, there is currently no way for the boot loader to - pass arguments to the kernel. For these platforms, you can supply - some command-line options at build time by entering them here. In - other cases you can specify kernel args so that you don't have - to set them up in board prom initialization routines. + pass arguments to the kernel. For these platforms, and for the cases + when you want to add some extra options to the command line or ignore + the default command line, you can supply some command-line options at + build time by entering them here. In other cases you can specify + kernel args so that you don't have to set them up in board prom + initialization routines. + + For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE + options. + +config CMDLINE_OVERRIDE + bool "Built-in command line overrides firware arguments" + default n + depends on CMDLINE_BOOL + help + By setting this option to 'Y' you will have your kernel ignore + command line arguments from firmware or second stage bootloader. + Instead, the built-in command line will be used exclusively. + + Normally, you will choose 'N' here. config DEBUG_STACK_USAGE bool "Enable stack utilization instrumentation" diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig index 1d5ec3c11c75..5a5b6ba7514e 100644 --- a/arch/mips/configs/ar7_defconfig +++ b/arch/mips/configs/ar7_defconfig @@ -1051,7 +1051,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index 8715de1d8092..267bd46120bc 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -1852,7 +1852,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig index efa65982239e..7fee0273c829 100644 --- a/arch/mips/configs/bcm63xx_defconfig +++ b/arch/mips/configs/bcm63xx_defconfig @@ -941,7 +941,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 1f0228d6f16e..c2f06e38c854 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1236,7 +1236,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_SB1XXX_CORELIS is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index be81bf68e170..72b7e456916e 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -782,7 +782,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=32M console=ttyVR0,38400" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/cavium-octeon_defconfig b/arch/mips/configs/cavium-octeon_defconfig index 22819d9c683a..c8507bc8e925 100644 --- a/arch/mips/configs/cavium-octeon_defconfig +++ b/arch/mips/configs/cavium-octeon_defconfig @@ -820,7 +820,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index b15028693785..49e61312e006 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1125,7 +1125,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 63cdea202911..68e90cd6b2d4 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1089,7 +1089,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 7ae0f9a1704d..90812830e940 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1089,7 +1089,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index a6d9e1f48bba..dabf03032e06 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1171,7 +1171,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=48M" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index a3a462b1f4e2..a15131373138 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1389,7 +1389,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index bfc962ed35b2..6b64339c0014 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1206,7 +1206,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 7eb6d1b4e322..cbb4d86f2912 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -881,7 +881,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index c6b1d6b29dfc..52968c46c806 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -560,7 +560,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index 17341a0b4695..a09dd03aa8c8 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -1710,7 +1710,7 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 3471ac9ab9db..222d7eca2fe4 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -1187,7 +1187,7 @@ CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 26127a8dd25d..ed84b4cb3c8d 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -939,7 +939,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig index ac6c850957f3..dab2e5aaadaf 100644 --- a/arch/mips/configs/ip28_defconfig +++ b/arch/mips/configs/ip28_defconfig @@ -815,7 +815,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index 56553b1a821c..1841c88d3d24 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -1125,7 +1125,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index 9db23fdffd9e..14c2ab3b2674 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -1373,7 +1373,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 11fec0e8a792..4d66c44cced8 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -834,7 +834,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig index 2fe15a5bfed8..08d481e3d42a 100644 --- a/arch/mips/configs/lasat_defconfig +++ b/arch/mips/configs/lasat_defconfig @@ -797,7 +797,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index ddb1c92b6f06..b71a0a4fb95f 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -1707,7 +1707,7 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 38d98739b165..d3c601206db2 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -1590,7 +1590,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig index 91375718082d..6a325c02b63c 100644 --- a/arch/mips/configs/markeins_defconfig +++ b/arch/mips/configs/markeins_defconfig @@ -1365,7 +1365,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 513e9a416fee..f77a34e0f938 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -634,7 +634,9 @@ CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp" +# CONFIG_CMDLINE_OVERRIDE is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index b893f9d13790..17203056b22b 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -816,7 +816,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index 89d2b6a9475c..000d185ddf42 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -1411,7 +1411,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set # CONFIG_MIPS_UNCACHED is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 319966898555..144b94d9a6ad 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -3017,7 +3017,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index c36e859ad811..ddf67f639194 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1082,7 +1082,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index 4b43e36fa1fe..5ec60836b645 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1199,7 +1199,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 7c8d351ad1cc..6647642b5d97 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1192,7 +1192,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig index 77a75f011973..848344d588d1 100644 --- a/arch/mips/configs/pnx8335-stb225_defconfig +++ b/arch/mips/configs/pnx8335-stb225_defconfig @@ -1033,7 +1033,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set # CONFIG_KERNEL_TESTS is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 945b27e13324..9d721fdccb30 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1214,7 +1214,9 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" +# CONFIG_CMDLINE_OVERRIDE is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index ff0fc0bedb2f..ab07ec08c6fa 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -1204,7 +1204,9 @@ CONFIG_DEBUG_SLAB=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" +# CONFIG_CMDLINE_OVERRIDE is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig index 86c8007c1743..7291633d81cc 100644 --- a/arch/mips/configs/powertv_defconfig +++ b/arch/mips/configs/powertv_defconfig @@ -1418,7 +1418,9 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_KMEMCHECK is not set +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="rw dhash_entries=1024 ihash_entries=1024 ip=10.0.1.3:10.0.1.1:10.0.1.1:255.255.255.0:zeus:eth0: root=/dev/nfs nfsroot=/nfsroot/cramfs,wsize=512,rsize=512,tcp nokgdb console=ttyUSB0,115200 memsize=252M" +# CONFIG_CMDLINE_OVERRIDE is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig index a9408dbe0d2a..57a50483abdf 100644 --- a/arch/mips/configs/rb532_defconfig +++ b/arch/mips/configs/rb532_defconfig @@ -1203,7 +1203,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index 1c9a5428aeab..21c2022d46ee 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -1061,7 +1061,7 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 5873fc50005e..790362890033 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -1693,7 +1693,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 5244716b67fc..7f07bf02b838 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -960,7 +960,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_SB1XXX_CORELIS is not set # diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index 937b47cbb4a8..c54d1128f9a3 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -891,7 +891,9 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index da7358404904..e7c5cd32a2bd 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -894,7 +894,9 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 99a0d21b8b22..b50032ba4d01 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -1076,7 +1076,9 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index d3646ea51c21..c02ba08b69ab 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -754,7 +754,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index c137831cc6a1..a35bc41389e5 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -886,7 +886,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200n8" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 4a04f0c1fa86..e3d68d651e7d 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -823,7 +823,7 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index bd55f71055ba..f9513f9e61d3 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -58,8 +58,12 @@ EXPORT_SYMBOL(mips_machtype); struct boot_mem_map boot_mem_map; -static char command_line[COMMAND_LINE_SIZE]; - char arcs_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; +static char __initdata command_line[COMMAND_LINE_SIZE]; +char __initdata arcs_cmdline[COMMAND_LINE_SIZE]; + +#ifdef CONFIG_CMDLINE_BOOL +static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; +#endif /* * mips_io_port_base is the begin of the address space to which x86 style @@ -458,8 +462,20 @@ static void __init arch_mem_init(char **cmdline_p) pr_info("Determined physical RAM map:\n"); print_memory_map(); - strlcpy(command_line, arcs_cmdline, sizeof(command_line)); - strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); +#ifdef CONFIG_CMDLINE_BOOL +#ifdef CONFIG_CMDLINE_OVERRIDE + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); +#else + if (builtin_cmdline[0]) { + strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE); + strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE); + } + strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); +#endif +#else + strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); +#endif + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; -- GitLab From a4609780c9acd291becfc5e81b08485f92803886 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Thu, 19 Nov 2009 16:46:32 +0000 Subject: [PATCH 254/618] MIPS: No longer hardwire CONFIG_EMBEDDED to y There's no reason for MIPS to select EMBEDDED. In fact, EMBEDDED makes MIPS more awkward to deal with because it makes it different to the majority of architectures for no good reason. [Ralf: Historically disabling EMBEDDED had hid essential options for many MIPS platforms such as serial console and forced crap like VGA support or power managment enabled for platforms where those don't make any sense. The name of the option is also _very_ missleading so many users don't select it even where is was required for a functioning kernel.] Signed-off-by: Martin Michlmayr Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/663/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index f374ccac1917..9541171f1220 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -10,8 +10,6 @@ config MIPS select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE_MCOUNT_RECORD select HAVE_FUNCTION_GRAPH_TRACER - # Horrible source of confusion. Die, die, die ... - select EMBEDDED select RTC_LIB if !MACH_LOONGSON mainmenu "Linux/MIPS Kernel Configuration" -- GitLab From cf72e9470dc071c395f7895b5cb9418dca27d07d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Dec 2009 01:57:36 +0000 Subject: [PATCH 255/618] MIPS: Cleanup random differences beween lmo and Linus' kernel. Signed-off-by: Ralf Baechle --- arch/mips/kernel/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 8dda21463226..9326af5186fe 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -2,8 +2,6 @@ # Makefile for the Linux/MIPS kernel. # -CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS) - extra-y := head.o init_task.o vmlinux.lds obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ @@ -103,3 +101,5 @@ obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o obj-$(CONFIG_MIPS_CPUFREQ) += cpufreq/ EXTRA_CFLAGS += -Werror + +CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS) -- GitLab From 95abd0dfaf5d2741dc9ebe733c9d609629a92b77 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 5 Nov 2009 09:21:54 +0800 Subject: [PATCH 256/618] RTC: rtc-cmos.c: Fix warning on MIPS This patch fixes the following warning with RTC_LIB on MIPS: drivers/rtc/rtc-cmos.c:697:2: warning: #warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes. Signed-off-by: Wu Zhangjin Cc: Arnaud Patard Cc: linux-mips@linux-mips.org Cc: rtc-linux@googlegroups.com Cc: Paul Gortmaker Cc: Alessandro Zummo Patchwork: http://patchwork.linux-mips.org/patch/570/ Acked-by: Alessandro Zummo Signed-off-by: Ralf Baechle --- drivers/rtc/rtc-cmos.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index eb154dc57164..c8c12325e69b 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -686,7 +686,8 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) */ #if defined(CONFIG_ATARI) address_space = 64; -#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) || defined(__sparc__) +#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \ + || defined(__sparc__) || defined(__mips__) address_space = 128; #else #warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes. -- GitLab From 606d62fa02cf1da43c6e21521650fff07a2e56d1 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Dec 2009 01:57:37 +0000 Subject: [PATCH 257/618] MIPS: Lasat: Fix botched changes to sysctl code. Commit 163931922220e4cb5effd5af1e105038c2f0ab7a "sysctl mips/lasat: Remove dead binary sysctl support" obviously wasn't test built ... Signed-off-by: Ralf Baechle --- arch/mips/lasat/sysctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index 14b9a28a4aec..d87ffd04cb0a 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -204,7 +204,7 @@ static ctl_table lasat_table[] = { .maxlen = sizeof(int), .mode = 0644, .proc_handler = proc_lasat_prid, -. }, + }, #ifdef CONFIG_INET { .procname = "ipaddr", -- GitLab From 416eb39556a03d1c7e52b0791e9052ccd71db241 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 17 Dec 2009 06:05:49 +0100 Subject: [PATCH 258/618] sched: Make warning less noisy Cc: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <20091216170517.807938893@chello.nl> Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 8a2bfd37ab4f..af7dfa74e6bb 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2041,7 +2041,7 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu) * We should never call set_task_cpu() on a blocked task, * ttwu() will sort out the placement. */ - WARN_ON(p->state != TASK_RUNNING && p->state != TASK_WAKING); + WARN_ON_ONCE(p->state != TASK_RUNNING && p->state != TASK_WAKING); #endif trace_sched_migrate_task(p, new_cpu); -- GitLab From d7b0c143693bcbf391d2be235e150b97bfd8f9ba Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Sun, 6 Dec 2009 18:26:17 +0200 Subject: [PATCH 259/618] sata_mv: increase PIO IORDY timeout The old value (0xbc) in cycles of the IORDY timeout is suitable for devices with core clock of 166 MHz, but some SoC controllers have faster core clocks. The new value will make the IORDY timeout large enough also for all SoC devices. Signed-off-by: Saeed Bishara Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index a8a7be0d06ff..bbeaf3a776c9 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -3393,7 +3393,7 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv, ZERO(0x024); /* respq outp */ ZERO(0x020); /* respq inp */ ZERO(0x02c); /* test control */ - writel(0xbc, port_mmio + EDMA_IORDY_TMOUT); + writel(0x800, port_mmio + EDMA_IORDY_TMOUT); } #undef ZERO -- GitLab From c77a2f4e6b76c9094182dfa653ece4243f6df80c Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Sun, 6 Dec 2009 18:26:18 +0200 Subject: [PATCH 260/618] sata_mv: support clkdev framework Signed-off-by: Saeed Bishara Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index bbeaf3a776c9..b625b3614989 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -59,6 +59,7 @@ #include #include #include +#include #include #include #include @@ -548,6 +549,10 @@ struct mv_host_priv { u32 irq_cause_offset; u32 irq_mask_offset; u32 unmask_all_irqs; + +#if defined(CONFIG_HAVE_CLK) + struct clk *clk; +#endif /* * These consistent DMA memory pools give us guaranteed * alignment for hardware-accessed data structures, @@ -4041,6 +4046,14 @@ static int mv_platform_probe(struct platform_device *pdev) resource_size(res)); hpriv->base -= SATAHC0_REG_BASE; +#if defined(CONFIG_HAVE_CLK) + hpriv->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(hpriv->clk)) + dev_notice(&pdev->dev, "cannot get clkdev\n"); + else + clk_enable(hpriv->clk); +#endif + /* * (Re-)program MBUS remapping windows if we are asked to. */ @@ -4049,12 +4062,12 @@ static int mv_platform_probe(struct platform_device *pdev) rc = mv_create_dma_pools(hpriv, &pdev->dev); if (rc) - return rc; + goto err; /* initialize adapter */ rc = mv_init_host(host, chip_soc); if (rc) - return rc; + goto err; dev_printk(KERN_INFO, &pdev->dev, "slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH, @@ -4062,6 +4075,15 @@ static int mv_platform_probe(struct platform_device *pdev) return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt, IRQF_SHARED, &mv6_sht); +err: +#if defined(CONFIG_HAVE_CLK) + if (!IS_ERR(hpriv->clk)) { + clk_disable(hpriv->clk); + clk_put(hpriv->clk); + } +#endif + + return rc; } /* @@ -4076,8 +4098,17 @@ static int __devexit mv_platform_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ata_host *host = dev_get_drvdata(dev); - +#if defined(CONFIG_HAVE_CLK) + struct mv_host_priv *hpriv = host->private_data; +#endif ata_host_detach(host); + +#if defined(CONFIG_HAVE_CLK) + if (!IS_ERR(hpriv->clk)) { + clk_disable(hpriv->clk); + clk_put(hpriv->clk); + } +#endif return 0; } -- GitLab From 6481f2b52cd5411ea6342b749daf0e4f3b390d7b Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Sun, 6 Dec 2009 18:26:19 +0200 Subject: [PATCH 261/618] sata_mv: add power management support for the platform driver Signed-off-by: Saeed Bishara Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) mode change 100644 => 100755 drivers/ata/sata_mv.c diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c old mode 100644 new mode 100755 index b625b3614989..0f7704c0b4cc --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4112,9 +4112,52 @@ static int __devexit mv_platform_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + if (host) + return ata_host_suspend(host, state); + else + return 0; +} + +static int mv_platform_resume(struct platform_device *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int ret; + + if (host) { + struct mv_host_priv *hpriv = host->private_data; + const struct mv_sata_platform_data *mv_platform_data = \ + pdev->dev.platform_data; + /* + * (Re-)program MBUS remapping windows if we are asked to. + */ + if (mv_platform_data->dram != NULL) + mv_conf_mbus_windows(hpriv, mv_platform_data->dram); + + /* initialize adapter */ + ret = mv_init_host(host, chip_soc); + if (ret) { + printk(KERN_ERR DRV_NAME ": Error during HW init\n"); + return ret; + } + ata_host_resume(host); + } + + return 0; +} +#else +#define mv_platform_suspend NULL +#define mv_platform_resume NULL +#endif + static struct platform_driver mv_platform_driver = { .probe = mv_platform_probe, .remove = __devexit_p(mv_platform_remove), + .suspend = mv_platform_suspend, + .resume = mv_platform_resume, .driver = { .name = DRV_NAME, .owner = THIS_MODULE, -- GitLab From c4bc7d7310a40c8c0b917e88983dc4a8e6b59e38 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Sun, 6 Dec 2009 18:26:20 +0200 Subject: [PATCH 262/618] sata_mv: move the PCI bar description initialization code The mv_init_host will be used to initialize the host hw on resume. The PCI bar description need to be initialized only once when the device probed. Signed-off-by: Saeed Bishara Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 0f7704c0b4cc..e1b9568538f3 100755 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -3910,14 +3910,6 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) void __iomem *port_mmio = mv_port_base(mmio, port); mv_port_init(&ap->ioaddr, port_mmio); - -#ifdef CONFIG_PCI - if (!IS_SOC(hpriv)) { - unsigned int offset = port_mmio - mmio; - ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); - ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); - } -#endif } for (hc = 0; hc < n_hc; hc++) { @@ -4268,7 +4260,7 @@ static int mv_pci_init_one(struct pci_dev *pdev, const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL }; struct ata_host *host; struct mv_host_priv *hpriv; - int n_ports, rc; + int n_ports, port, rc; if (!printed_version++) dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); @@ -4304,6 +4296,15 @@ static int mv_pci_init_one(struct pci_dev *pdev, if (rc) return rc; + for (port = 0; port < host->n_ports; port++) { + struct ata_port *ap = host->ports[port]; + void __iomem *port_mmio = mv_port_base(hpriv->base, port); + unsigned int offset = port_mmio - hpriv->base; + + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); + } + /* initialize adapter */ rc = mv_init_host(host, board_idx); if (rc) -- GitLab From 0cdd6eb7e08fc39e9c906cc46b6ee9095c3077a9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 10 Dec 2009 10:36:01 +0100 Subject: [PATCH 263/618] libata: use the WRITE_SAME_16 define Now that the scsi tree has hit mainline we can use the newly added WRITE_SAME_16 define. Signed-off-by: Christoph Hellwig Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 1683ebda900b..f4ea5a8c325b 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3022,7 +3022,7 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) case WRITE_16: return ata_scsi_rw_xlat; - case 0x93 /*WRITE_SAME_16*/: + case WRITE_SAME_16: return ata_scsi_write_same_xlat; case SYNCHRONIZE_CACHE: -- GitLab From 4716eaf20f37d10fd01b0fcacb3e41c1abd362c3 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Thu, 10 Dec 2009 20:03:10 -0500 Subject: [PATCH 264/618] pata_octeon_cf: use resource_size(), to fix resource sizing bug It appears the size for cs1 is calculated using the wrong resource. Use the function resource_size to get the correct value. Signed-off-by: H Hartley Sweeten Signed-off-by: Jeff Garzik --- drivers/ata/pata_octeon_cf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c index d6f69561dc86..37ef416c1242 100644 --- a/drivers/ata/pata_octeon_cf.c +++ b/drivers/ata/pata_octeon_cf.c @@ -853,7 +853,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev) return -EINVAL; cs1 = devm_ioremap_nocache(&pdev->dev, res_cs1->start, - res_cs0->end - res_cs1->start + 1); + resource_size(res_cs1)); if (!cs1) return -ENOMEM; -- GitLab From 1bfeff03f8a52eb896e5aad33d52e2451437bb0b Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Thu, 17 Dec 2009 01:05:00 -0500 Subject: [PATCH 265/618] sata_mv: store the board_idx into the host private data This information will be used in the resume function. Signed-off-by: Saeed Bishara Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index e1b9568538f3..53a1d97cd9a6 100755 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -539,6 +539,7 @@ struct mv_port_signal { struct mv_host_priv { u32 hp_flags; + unsigned int board_idx; u32 main_irq_mask; struct mv_port_signal signal[8]; const struct mv_hw_ops *ops; @@ -3859,7 +3860,6 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) /** * mv_init_host - Perform some early initialization of the host. * @host: ATA host to initialize - * @board_idx: controller index * * If possible, do an early global reset of the host. Then do * our port init and clear/unmask all/relevant host interrupts. @@ -3867,13 +3867,13 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) * LOCKING: * Inherited from caller. */ -static int mv_init_host(struct ata_host *host, unsigned int board_idx) +static int mv_init_host(struct ata_host *host) { int rc = 0, n_hc, port, hc; struct mv_host_priv *hpriv = host->private_data; void __iomem *mmio = hpriv->base; - rc = mv_chip_id(host, board_idx); + rc = mv_chip_id(host, hpriv->board_idx); if (rc) goto done; @@ -4032,6 +4032,7 @@ static int mv_platform_probe(struct platform_device *pdev) return -ENOMEM; host->private_data = hpriv; hpriv->n_ports = n_ports; + hpriv->board_idx = chip_soc; host->iomap = NULL; hpriv->base = devm_ioremap(&pdev->dev, res->start, @@ -4057,7 +4058,7 @@ static int mv_platform_probe(struct platform_device *pdev) goto err; /* initialize adapter */ - rc = mv_init_host(host, chip_soc); + rc = mv_init_host(host); if (rc) goto err; @@ -4130,7 +4131,7 @@ static int mv_platform_resume(struct platform_device *pdev) mv_conf_mbus_windows(hpriv, mv_platform_data->dram); /* initialize adapter */ - ret = mv_init_host(host, chip_soc); + ret = mv_init_host(host); if (ret) { printk(KERN_ERR DRV_NAME ": Error during HW init\n"); return ret; @@ -4274,6 +4275,7 @@ static int mv_pci_init_one(struct pci_dev *pdev, return -ENOMEM; host->private_data = hpriv; hpriv->n_ports = n_ports; + hpriv->board_idx = board_idx; /* acquire resources */ rc = pcim_enable_device(pdev); @@ -4306,7 +4308,7 @@ static int mv_pci_init_one(struct pci_dev *pdev, } /* initialize adapter */ - rc = mv_init_host(host, board_idx); + rc = mv_init_host(host); if (rc) return rc; -- GitLab From b2dec48ccaad004fc706352f82725d43369d9bd7 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Sun, 6 Dec 2009 18:26:22 +0200 Subject: [PATCH 266/618] sata_mv: add power management support for the PCI controllers. Signed-off-by: Saeed Bishara Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 53a1d97cd9a6..73768195ccc2 100755 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4161,6 +4161,9 @@ static struct platform_driver mv_platform_driver = { #ifdef CONFIG_PCI static int mv_pci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM +static int mv_pci_device_resume(struct pci_dev *pdev); +#endif static struct pci_driver mv_pci_driver = { @@ -4168,6 +4171,11 @@ static struct pci_driver mv_pci_driver = { .id_table = mv_pci_tbl, .probe = mv_pci_init_one, .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = mv_pci_device_resume, +#endif + }; /* move to PCI layer or libata core? */ @@ -4324,6 +4332,27 @@ static int mv_pci_init_one(struct pci_dev *pdev, return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED, IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht); } + +#ifdef CONFIG_PM +static int mv_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + /* initialize adapter */ + rc = mv_init_host(host); + if (rc) + return rc; + + ata_host_resume(host); + + return 0; +} +#endif #endif static int mv_platform_probe(struct platform_device *pdev); -- GitLab From 9a8fd68b15e7b047678a651b7f7e2f3dcd19d20d Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Tue, 8 Dec 2009 20:48:10 -0600 Subject: [PATCH 267/618] libata: fix reporting of drained bytes when clearing DRQ When we drain data from a device to clear DRQ during error recovery, the number of bytes reported as drained is too low by a factor of 2 because the count is actually reporting the number of words drained, not bytes. Fix this. Signed-off-by: Robert Hancock Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index efa8773bef5a..741065c9da67 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2275,7 +2275,7 @@ void ata_sff_drain_fifo(struct ata_queued_cmd *qc) ap = qc->ap; /* Drain up to 64K of data before we give up this recovery method */ for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) - && count < 32768; count++) + && count < 65536; count += 2) ioread16(ap->ioaddr.data_addr); /* Can become DEBUG later */ -- GitLab From 256ace9bbd4cdb6d48d5f55d55d42fa20527fad1 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 17 Dec 2009 01:11:27 -0500 Subject: [PATCH 268/618] pata_hpt3x2n: fix clock turnaround The clock turnaround code still doesn't work for several reasons: - 'USE_DPLL' flag in 'ap->host->private_data' is never initialized or updated, so the driver can only set the chip to the DPLL clock mode, not the PCI mode; - the driver doesn't serialize access to the channels depending on the current clock mode like the vendor drivers, so the clock turnaround is only executed "optionally", not always as it should be; - the wrong ports are written to when hpt3x2n_set_clock() is called for the secondary channel; - hpt3x2n_set_clock() can inadvertently enable the disabled channels when resetting the channel state machines. Signed-off-by: Sergei Shtylyov Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt3x2n.c | 64 +++++++++++++++++++++----------------- 1 file changed, 35 insertions(+), 29 deletions(-) diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 9a09a1b11ca5..dd26bc73bd9a 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -8,7 +8,7 @@ * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc - * Portions Copyright (C) 2005-2007 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2009 MontaVista Software, Inc. * * * TODO @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.7" +#define DRV_VERSION "0.3.8" enum { HPT_PCI_FAST = (1 << 31), @@ -264,7 +264,7 @@ static void hpt3x2n_bmdma_stop(struct ata_queued_cmd *qc) static void hpt3x2n_set_clock(struct ata_port *ap, int source) { - void __iomem *bmdma = ap->ioaddr.bmdma_addr; + void __iomem *bmdma = ap->ioaddr.bmdma_addr - ap->port_no * 8; /* Tristate the bus */ iowrite8(0x80, bmdma+0x73); @@ -274,9 +274,9 @@ static void hpt3x2n_set_clock(struct ata_port *ap, int source) iowrite8(source, bmdma+0x7B); iowrite8(0xC0, bmdma+0x79); - /* Reset state machines */ - iowrite8(0x37, bmdma+0x70); - iowrite8(0x37, bmdma+0x74); + /* Reset state machines, avoid enabling the disabled channels */ + iowrite8(ioread8(bmdma+0x70) | 0x32, bmdma+0x70); + iowrite8(ioread8(bmdma+0x74) | 0x32, bmdma+0x74); /* Complete reset */ iowrite8(0x00, bmdma+0x79); @@ -286,21 +286,10 @@ static void hpt3x2n_set_clock(struct ata_port *ap, int source) iowrite8(0x00, bmdma+0x77); } -/* Check if our partner interface is busy */ - -static int hpt3x2n_pair_idle(struct ata_port *ap) -{ - struct ata_host *host = ap->host; - struct ata_port *pair = host->ports[ap->port_no ^ 1]; - - if (pair->hsm_task_state == HSM_ST_IDLE) - return 1; - return 0; -} - static int hpt3x2n_use_dpll(struct ata_port *ap, int writing) { long flags = (long)ap->host->private_data; + /* See if we should use the DPLL */ if (writing) return USE_DPLL; /* Needed for write */ @@ -309,20 +298,35 @@ static int hpt3x2n_use_dpll(struct ata_port *ap, int writing) return 0; } +static int hpt3x2n_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_port *alt = ap->host->ports[ap->port_no ^ 1]; + int rc, flags = (long)ap->host->private_data; + int dpll = hpt3x2n_use_dpll(ap, qc->tf.flags & ATA_TFLAG_WRITE); + + /* First apply the usual rules */ + rc = ata_std_qc_defer(qc); + if (rc != 0) + return rc; + + if ((flags & USE_DPLL) != dpll && alt->qc_active) + return ATA_DEFER_PORT; + return 0; +} + static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc) { - struct ata_taskfile *tf = &qc->tf; struct ata_port *ap = qc->ap; int flags = (long)ap->host->private_data; + int dpll = hpt3x2n_use_dpll(ap, qc->tf.flags & ATA_TFLAG_WRITE); - if (hpt3x2n_pair_idle(ap)) { - int dpll = hpt3x2n_use_dpll(ap, (tf->flags & ATA_TFLAG_WRITE)); - if ((flags & USE_DPLL) != dpll) { - if (dpll == 1) - hpt3x2n_set_clock(ap, 0x21); - else - hpt3x2n_set_clock(ap, 0x23); - } + if ((flags & USE_DPLL) != dpll) { + flags &= ~USE_DPLL; + flags |= dpll; + ap->host->private_data = (void *)(long)flags; + + hpt3x2n_set_clock(ap, dpll ? 0x21 : 0x23); } return ata_sff_qc_issue(qc); } @@ -339,6 +343,8 @@ static struct ata_port_operations hpt3x2n_port_ops = { .inherits = &ata_bmdma_port_ops, .bmdma_stop = hpt3x2n_bmdma_stop, + + .qc_defer = hpt3x2n_qc_defer, .qc_issue = hpt3x2n_qc_issue, .cable_detect = hpt3x2n_cable_detect, @@ -454,7 +460,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) unsigned int f_low, f_high; int adjust; unsigned long iobase = pci_resource_start(dev, 4); - void *hpriv = NULL; + void *hpriv = (void *)USE_DPLL; int rc; rc = pcim_enable_device(dev); @@ -539,7 +545,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* Set our private data up. We only need a few flags so we use it directly */ if (pci_mhz > 60) { - hpriv = (void *)PCI66; + hpriv = (void *)(PCI66 | USE_DPLL); /* * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in * the MISC. register to stretch the UltraDMA Tss timing. -- GitLab From 0535f2bc170bc0779ac471faff39f633ca19ab59 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 17 Dec 2009 01:23:16 -0500 Subject: [PATCH 269/618] sata_mv: remove pointless NULL test Remove !ap test, where ap is guaranteed not-NULL. Found by way of automated bug report from Alexander Strakh via "Linux Device Drivers Verification Project (Svace Detector)" Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 73768195ccc2..df8ee325d3ca 100755 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2781,7 +2781,7 @@ static void mv_port_intr(struct ata_port *ap, u32 port_cause) struct mv_port_priv *pp; int edma_was_enabled; - if (!ap || (ap->flags & ATA_FLAG_DISABLED)) { + if (ap->flags & ATA_FLAG_DISABLED) { mv_unexpected_intr(ap, 0); return; } -- GitLab From 27f3b24de03fc7cec6f2406f8525ad18086c2121 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 16 Dec 2009 17:16:19 -0500 Subject: [PATCH 270/618] perf probe: Fix libdwarf include path for Debian Fix libdwarf include path to fit debian-like systems too. Borislav Petkov reported: > even after installing libdwarf-dev on my debian box here, > make in tools/perf/ still complains that it cannot find libdwarf: > > Makefile:491: No libdwarf.h found or old libdwarf.h found, disables dwarf > support. Please install libdwarf-dev/libdwarf-devel >= 20081231 > > The problem is that the include path on debian is not > /usr/include/libdwarf/ but simply /usr/include because the debian > package libdwarf-dev puts the headers straight into > /usr/include. This patch adds -I/usr/include/libdwarf to BASIC_CFLAGS and fix probe-finder.h to include just libdwarf.h/dwarf.h. This patch also adds a workaround for the undefined _MIPS_SZLONG bug in libdwarf.h. Reported-by: Borislav Petkov Signed-off-by: Masami Hiramatsu Cc: Frederic Weisbecker Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Peter Zijlstra Cc: Srikar Dronamraju Cc: Gabor Gombas Cc: systemtap Cc: DLE LKML-Reference: <20091216221618.13816.83296.stgit@dhcp-100-2-132.bos.redhat.com> [ v2: small stylistic fixlets to probe-finder.h ] Signed-off-by: Ingo Molnar --- tools/perf/Makefile | 3 +- tools/perf/util/probe-finder.h | 59 ++++++++++++++++++---------------- 2 files changed, 34 insertions(+), 28 deletions(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 7814dbbd401d..4390d225686d 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -487,10 +487,11 @@ else msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]); endif -ifneq ($(shell sh -c "(echo '\#include '; echo '\#include '; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -ldwarf -lelf -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) +ifneq ($(shell sh -c "(echo '\#ifndef _MIPS_SZLONG'; echo '\#define _MIPS_SZLONG 0'; echo '\#endif'; echo '\#include '; echo '\#include '; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/libdwarf -ldwarf -lelf -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) msg := $(warning No libdwarf.h found or old libdwarf.h found, disables dwarf support. Please install libdwarf-dev/libdwarf-devel >= 20081231); BASIC_CFLAGS += -DNO_LIBDWARF else + BASIC_CFLAGS += -I/usr/include/libdwarf EXTLIBS += -lelf -ldwarf LIB_OBJS += util/probe-finder.o endif diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h index 5e4050ce2963..a4086aaddb73 100644 --- a/tools/perf/util/probe-finder.h +++ b/tools/perf/util/probe-finder.h @@ -1,9 +1,9 @@ #ifndef _PROBE_FINDER_H #define _PROBE_FINDER_H -#define MAX_PATH_LEN 256 -#define MAX_PROBE_BUFFER 1024 -#define MAX_PROBES 128 +#define MAX_PATH_LEN 256 +#define MAX_PROBE_BUFFER 1024 +#define MAX_PROBES 128 static inline int is_c_varname(const char *name) { @@ -12,48 +12,53 @@ static inline int is_c_varname(const char *name) } struct probe_point { - char *event; /* Event name */ - char *group; /* Event group */ + char *event; /* Event name */ + char *group; /* Event group */ /* Inputs */ - char *file; /* File name */ - int line; /* Line number */ + char *file; /* File name */ + int line; /* Line number */ - char *function; /* Function name */ - int offset; /* Offset bytes */ + char *function; /* Function name */ + int offset; /* Offset bytes */ - int nr_args; /* Number of arguments */ - char **args; /* Arguments */ + int nr_args; /* Number of arguments */ + char **args; /* Arguments */ - int retprobe; /* Return probe */ + int retprobe; /* Return probe */ /* Output */ - int found; /* Number of found probe points */ - char *probes[MAX_PROBES]; /* Output buffers (will be allocated)*/ + int found; /* Number of found probe points */ + char *probes[MAX_PROBES]; /* Output buffers (will be allocated)*/ }; #ifndef NO_LIBDWARF extern int find_probepoint(int fd, struct probe_point *pp); -#include -#include +/* Workaround for undefined _MIPS_SZLONG bug in libdwarf.h: */ +#ifndef _MIPS_SZLONG +# define _MIPS_SZLONG 0 +#endif + +#include +#include struct probe_finder { - struct probe_point *pp; /* Target probe point */ + struct probe_point *pp; /* Target probe point */ /* For function searching */ - Dwarf_Addr addr; /* Address */ - Dwarf_Unsigned fno; /* File number */ - Dwarf_Unsigned lno; /* Line number */ - Dwarf_Off inl_offs; /* Inline offset */ - Dwarf_Die cu_die; /* Current CU */ + Dwarf_Addr addr; /* Address */ + Dwarf_Unsigned fno; /* File number */ + Dwarf_Unsigned lno; /* Line number */ + Dwarf_Off inl_offs; /* Inline offset */ + Dwarf_Die cu_die; /* Current CU */ /* For variable searching */ - Dwarf_Addr cu_base; /* Current CU base address */ - Dwarf_Locdesc fbloc; /* Location of Current Frame Base */ - const char *var; /* Current variable name */ - char *buf; /* Current output buffer */ - int len; /* Length of output buffer */ + Dwarf_Addr cu_base; /* Current CU base address */ + Dwarf_Locdesc fbloc; /* Location of Current Frame Base */ + const char *var; /* Current variable name */ + char *buf; /* Current output buffer */ + int len; /* Length of output buffer */ }; #endif /* NO_LIBDWARF */ -- GitLab From 96c96612e952f63cc0055db9df7d8b5b1ada02be Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 16 Dec 2009 17:24:00 -0500 Subject: [PATCH 271/618] perf probe: Check whether debugfs path is correct Check whether the debugfs path is correct before executing a command, because perf-probe depends on debugfs. Signed-off-by: Masami Hiramatsu Cc: Frederic Weisbecker Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Steven Rostedt Cc: Jim Keniston Cc: Ananth N Mavinakayanahalli Cc: Christoph Hellwig Cc: Jason Baron Cc: K.Prasad Cc: Peter Zijlstra Cc: Srikar Dronamraju Cc: systemtap Cc: DLE LKML-Reference: <20091216222400.14459.48162.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar --- tools/perf/builtin-probe.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c index 7e741f54d798..c1e6774fd3ed 100644 --- a/tools/perf/builtin-probe.c +++ b/tools/perf/builtin-probe.c @@ -38,6 +38,7 @@ #include "util/strlist.h" #include "util/event.h" #include "util/debug.h" +#include "util/debugfs.h" #include "util/symbol.h" #include "util/thread.h" #include "util/session.h" @@ -205,6 +206,9 @@ int cmd_probe(int argc, const char **argv, const char *prefix __used) if ((!session.nr_probe && !session.dellist && !session.list_events)) usage_with_options(probe_usage, options); + if (debugfs_valid_mountpoint(debugfs_path) < 0) + die("Failed to find debugfs path."); + if (session.list_events) { if (session.nr_probe != 0 || session.dellist) { pr_warning(" Error: Don't use --list with" -- GitLab From 6f3cf440470650b3841d325acacd0c5ea9504c68 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 16 Dec 2009 17:24:08 -0500 Subject: [PATCH 272/618] kprobe-tracer: Check new event/group name Check new event/group name is same syntax as a C symbol. In other words, checking the name is as like as other tracepoint events. This can prevent user to create an event with useless name (e.g. foo|bar, foo*bar). Signed-off-by: Masami Hiramatsu Cc: Frederic Weisbecker Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Steven Rostedt Cc: Jim Keniston Cc: Ananth N Mavinakayanahalli Cc: Christoph Hellwig Cc: Jason Baron Cc: K.Prasad Cc: Peter Zijlstra Cc: Srikar Dronamraju Cc: systemtap Cc: DLE LKML-Reference: <20091216222408.14459.68790.stgit@dhcp-100-2-132.bos.redhat.com> [ v2: minor cleanups ] Signed-off-by: Ingo Molnar --- kernel/trace/trace_kprobe.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 7ecab06547a5..375f81a568dc 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -282,6 +282,18 @@ static int kprobe_dispatcher(struct kprobe *kp, struct pt_regs *regs); static int kretprobe_dispatcher(struct kretprobe_instance *ri, struct pt_regs *regs); +/* Check the name is good for event/group */ +static int check_event_name(const char *name) +{ + if (!isalpha(*name) && *name != '_') + return 0; + while (*++name != '\0') { + if (!isalpha(*name) && !isdigit(*name) && *name != '_') + return 0; + } + return 1; +} + /* * Allocate new trace_probe and initialize it (including kprobes). */ @@ -293,10 +305,11 @@ static struct trace_probe *alloc_trace_probe(const char *group, int nargs, int is_return) { struct trace_probe *tp; + int ret = -ENOMEM; tp = kzalloc(SIZEOF_TRACE_PROBE(nargs), GFP_KERNEL); if (!tp) - return ERR_PTR(-ENOMEM); + return ERR_PTR(ret); if (symbol) { tp->symbol = kstrdup(symbol, GFP_KERNEL); @@ -312,14 +325,20 @@ static struct trace_probe *alloc_trace_probe(const char *group, else tp->rp.kp.pre_handler = kprobe_dispatcher; - if (!event) + if (!event || !check_event_name(event)) { + ret = -EINVAL; goto error; + } + tp->call.name = kstrdup(event, GFP_KERNEL); if (!tp->call.name) goto error; - if (!group) + if (!group || !check_event_name(group)) { + ret = -EINVAL; goto error; + } + tp->call.system = kstrdup(group, GFP_KERNEL); if (!tp->call.system) goto error; @@ -330,7 +349,7 @@ static struct trace_probe *alloc_trace_probe(const char *group, kfree(tp->call.name); kfree(tp->symbol); kfree(tp); - return ERR_PTR(-ENOMEM); + return ERR_PTR(ret); } static void free_probe_arg(struct probe_arg *arg) @@ -695,10 +714,10 @@ static int create_trace_probe(int argc, char **argv) if (!event) { /* Make a new event name */ if (symbol) - snprintf(buf, MAX_EVENT_NAME_LEN, "%c@%s%+ld", + snprintf(buf, MAX_EVENT_NAME_LEN, "%c_%s_%ld", is_return ? 'r' : 'p', symbol, offset); else - snprintf(buf, MAX_EVENT_NAME_LEN, "%c@0x%p", + snprintf(buf, MAX_EVENT_NAME_LEN, "%c_0x%p", is_return ? 'r' : 'p', addr); event = buf; } -- GitLab From b7702a2136b5f8e0e186e22cae91aaecf98b418c Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 16 Dec 2009 17:24:15 -0500 Subject: [PATCH 273/618] perf probe: Check new event name Check new event name is same syntax as a C symbol in perf command. In other words, checking the name is as like as other tracepoint events. This can prevent user to create an event with useless name (e.g. foo|bar, foo*bar). Signed-off-by: Masami Hiramatsu Cc: Frederic Weisbecker Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Steven Rostedt Cc: Jim Keniston Cc: Ananth N Mavinakayanahalli Cc: Christoph Hellwig Cc: Jason Baron Cc: K.Prasad Cc: Peter Zijlstra Cc: Srikar Dronamraju Cc: Frederic Weisbecker Cc: systemtap Cc: DLE LKML-Reference: <20091216222415.14459.71383.stgit@dhcp-100-2-132.bos.redhat.com> [ v2: minor cleanups ] Signed-off-by: Ingo Molnar --- tools/perf/util/probe-event.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index 2ca62154f79b..29465d440043 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -62,6 +62,18 @@ static int e_snprintf(char *str, size_t size, const char *format, ...) return ret; } +/* Check the name is good for event/group */ +static bool check_event_name(const char *name) +{ + if (!isalpha(*name) && *name != '_') + return false; + while (*++name != '\0') { + if (!isalpha(*name) && !isdigit(*name) && *name != '_') + return false; + } + return true; +} + /* Parse probepoint definition. */ static void parse_perf_probe_probepoint(char *arg, struct probe_point *pp) { @@ -82,6 +94,9 @@ static void parse_perf_probe_probepoint(char *arg, struct probe_point *pp) ptr = strchr(arg, ':'); if (ptr) /* Group name is not supported yet. */ semantic_error("Group name is not supported yet."); + if (!check_event_name(arg)) + semantic_error("%s is bad for event name -it must " + "follow C symbol-naming rule.", arg); pp->event = strdup(arg); arg = tmp; } -- GitLab From 234da7bcdc7aaa935846534c3b726dbc79a9cdd5 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 16 Dec 2009 20:21:05 +0100 Subject: [PATCH 274/618] sched: Teach might_sleep() about preemptible RCU In practice, it is harmless to voluntarily sleep in a rcu_read_lock() section if we are running under preempt rcu, but it is illegal if we build a kernel running non-preemptable rcu. Currently, might_sleep() doesn't notice sleepable operations under rcu_read_lock() sections if we are running under preemptable rcu because preempt_count() is left untouched after rcu_read_lock() in this case. But we want developers who test their changes under such config to notice the "sleeping while atomic" issues. So we add rcu_read_lock_nesting to prempt_count() in might_sleep() checks. [ v2: Handle rcu-tiny ] Signed-off-by: Frederic Weisbecker Reviewed-by: Paul E. McKenney Cc: Peter Zijlstra LKML-Reference: <1260991265-8451-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar --- include/linux/rcutiny.h | 5 +++++ include/linux/rcutree.h | 11 +++++++++++ kernel/sched.c | 2 +- 3 files changed, 17 insertions(+), 1 deletion(-) diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h index c4ba9a78721e..96cc307ed9f4 100644 --- a/include/linux/rcutiny.h +++ b/include/linux/rcutiny.h @@ -101,4 +101,9 @@ static inline void exit_rcu(void) { } +static inline int rcu_preempt_depth(void) +{ + return 0; +} + #endif /* __LINUX_RCUTINY_H */ diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index c93eee5911b0..8044b1b94333 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -45,6 +45,12 @@ extern void __rcu_read_unlock(void); extern void synchronize_rcu(void); extern void exit_rcu(void); +/* + * Defined as macro as it is a very low level header + * included from areas that don't even know about current + */ +#define rcu_preempt_depth() (current->rcu_read_lock_nesting) + #else /* #ifdef CONFIG_TREE_PREEMPT_RCU */ static inline void __rcu_read_lock(void) @@ -63,6 +69,11 @@ static inline void exit_rcu(void) { } +static inline int rcu_preempt_depth(void) +{ + return 0; +} + #endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */ static inline void __rcu_read_lock_bh(void) diff --git a/kernel/sched.c b/kernel/sched.c index af7dfa74e6bb..7be88a7be047 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -9682,7 +9682,7 @@ void __init sched_init(void) #ifdef CONFIG_DEBUG_SPINLOCK_SLEEP static inline int preempt_count_equals(int preempt_offset) { - int nested = preempt_count() & ~PREEMPT_ACTIVE; + int nested = (preempt_count() & ~PREEMPT_ACTIVE) + rcu_preempt_depth(); return (nested == PREEMPT_INATOMIC_BASE + preempt_offset); } -- GitLab From 5b74ed4729ad2b2017453add68104a83206caefb Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 16 Dec 2009 10:09:45 -0500 Subject: [PATCH 275/618] perf events: Remove unused perf_counter.h header file Since nothing includes the file and it's also not exported to user space, remove it. Signed-off-by: Robert P. J. Day Cc: Peter Zijlstra Cc: Paul Mackerras LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 444 ----------------------------------- 1 file changed, 444 deletions(-) delete mode 100644 include/linux/perf_counter.h diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h deleted file mode 100644 index e3fb25606706..000000000000 --- a/include/linux/perf_counter.h +++ /dev/null @@ -1,444 +0,0 @@ -/* - * NOTE: this file will be removed in a future kernel release, it is - * provided as a courtesy copy of user-space code that relies on the - * old (pre-rename) symbols and constants. - * - * Performance events: - * - * Copyright (C) 2008-2009, Thomas Gleixner - * Copyright (C) 2008-2009, Red Hat, Inc., Ingo Molnar - * Copyright (C) 2008-2009, Red Hat, Inc., Peter Zijlstra - * - * Data type definitions, declarations, prototypes. - * - * Started by: Thomas Gleixner and Ingo Molnar - * - * For licencing details see kernel-base/COPYING - */ -#ifndef _LINUX_PERF_COUNTER_H -#define _LINUX_PERF_COUNTER_H - -#include -#include -#include - -/* - * User-space ABI bits: - */ - -/* - * attr.type - */ -enum perf_type_id { - PERF_TYPE_HARDWARE = 0, - PERF_TYPE_SOFTWARE = 1, - PERF_TYPE_TRACEPOINT = 2, - PERF_TYPE_HW_CACHE = 3, - PERF_TYPE_RAW = 4, - - PERF_TYPE_MAX, /* non-ABI */ -}; - -/* - * Generalized performance counter event types, used by the - * attr.event_id parameter of the sys_perf_counter_open() - * syscall: - */ -enum perf_hw_id { - /* - * Common hardware events, generalized by the kernel: - */ - PERF_COUNT_HW_CPU_CYCLES = 0, - PERF_COUNT_HW_INSTRUCTIONS = 1, - PERF_COUNT_HW_CACHE_REFERENCES = 2, - PERF_COUNT_HW_CACHE_MISSES = 3, - PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, - PERF_COUNT_HW_BRANCH_MISSES = 5, - PERF_COUNT_HW_BUS_CYCLES = 6, - - PERF_COUNT_HW_MAX, /* non-ABI */ -}; - -/* - * Generalized hardware cache counters: - * - * { L1-D, L1-I, LLC, ITLB, DTLB, BPU } x - * { read, write, prefetch } x - * { accesses, misses } - */ -enum perf_hw_cache_id { - PERF_COUNT_HW_CACHE_L1D = 0, - PERF_COUNT_HW_CACHE_L1I = 1, - PERF_COUNT_HW_CACHE_LL = 2, - PERF_COUNT_HW_CACHE_DTLB = 3, - PERF_COUNT_HW_CACHE_ITLB = 4, - PERF_COUNT_HW_CACHE_BPU = 5, - - PERF_COUNT_HW_CACHE_MAX, /* non-ABI */ -}; - -enum perf_hw_cache_op_id { - PERF_COUNT_HW_CACHE_OP_READ = 0, - PERF_COUNT_HW_CACHE_OP_WRITE = 1, - PERF_COUNT_HW_CACHE_OP_PREFETCH = 2, - - PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */ -}; - -enum perf_hw_cache_op_result_id { - PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0, - PERF_COUNT_HW_CACHE_RESULT_MISS = 1, - - PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */ -}; - -/* - * Special "software" counters provided by the kernel, even if the hardware - * does not support performance counters. These counters measure various - * physical and sw events of the kernel (and allow the profiling of them as - * well): - */ -enum perf_sw_ids { - PERF_COUNT_SW_CPU_CLOCK = 0, - PERF_COUNT_SW_TASK_CLOCK = 1, - PERF_COUNT_SW_PAGE_FAULTS = 2, - PERF_COUNT_SW_CONTEXT_SWITCHES = 3, - PERF_COUNT_SW_CPU_MIGRATIONS = 4, - PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, - PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, - PERF_COUNT_SW_ALIGNMENT_FAULTS = 7, - PERF_COUNT_SW_EMULATION_FAULTS = 8, - - PERF_COUNT_SW_MAX, /* non-ABI */ -}; - -/* - * Bits that can be set in attr.sample_type to request information - * in the overflow packets. - */ -enum perf_counter_sample_format { - PERF_SAMPLE_IP = 1U << 0, - PERF_SAMPLE_TID = 1U << 1, - PERF_SAMPLE_TIME = 1U << 2, - PERF_SAMPLE_ADDR = 1U << 3, - PERF_SAMPLE_READ = 1U << 4, - PERF_SAMPLE_CALLCHAIN = 1U << 5, - PERF_SAMPLE_ID = 1U << 6, - PERF_SAMPLE_CPU = 1U << 7, - PERF_SAMPLE_PERIOD = 1U << 8, - PERF_SAMPLE_STREAM_ID = 1U << 9, - PERF_SAMPLE_RAW = 1U << 10, - - PERF_SAMPLE_MAX = 1U << 11, /* non-ABI */ -}; - -/* - * The format of the data returned by read() on a perf counter fd, - * as specified by attr.read_format: - * - * struct read_format { - * { u64 value; - * { u64 time_enabled; } && PERF_FORMAT_ENABLED - * { u64 time_running; } && PERF_FORMAT_RUNNING - * { u64 id; } && PERF_FORMAT_ID - * } && !PERF_FORMAT_GROUP - * - * { u64 nr; - * { u64 time_enabled; } && PERF_FORMAT_ENABLED - * { u64 time_running; } && PERF_FORMAT_RUNNING - * { u64 value; - * { u64 id; } && PERF_FORMAT_ID - * } cntr[nr]; - * } && PERF_FORMAT_GROUP - * }; - */ -enum perf_counter_read_format { - PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, - PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, - PERF_FORMAT_ID = 1U << 2, - PERF_FORMAT_GROUP = 1U << 3, - - PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ -}; - -#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ - -/* - * Hardware event to monitor via a performance monitoring counter: - */ -struct perf_counter_attr { - - /* - * Major type: hardware/software/tracepoint/etc. - */ - __u32 type; - - /* - * Size of the attr structure, for fwd/bwd compat. - */ - __u32 size; - - /* - * Type specific configuration information. - */ - __u64 config; - - union { - __u64 sample_period; - __u64 sample_freq; - }; - - __u64 sample_type; - __u64 read_format; - - __u64 disabled : 1, /* off by default */ - inherit : 1, /* children inherit it */ - pinned : 1, /* must always be on PMU */ - exclusive : 1, /* only group on PMU */ - exclude_user : 1, /* don't count user */ - exclude_kernel : 1, /* ditto kernel */ - exclude_hv : 1, /* ditto hypervisor */ - exclude_idle : 1, /* don't count when idle */ - mmap : 1, /* include mmap data */ - comm : 1, /* include comm data */ - freq : 1, /* use freq, not period */ - inherit_stat : 1, /* per task counts */ - enable_on_exec : 1, /* next exec enables */ - task : 1, /* trace fork/exit */ - watermark : 1, /* wakeup_watermark */ - - __reserved_1 : 49; - - union { - __u32 wakeup_events; /* wakeup every n events */ - __u32 wakeup_watermark; /* bytes before wakeup */ - }; - __u32 __reserved_2; - - __u64 __reserved_3; -}; - -/* - * Ioctls that can be done on a perf counter fd: - */ -#define PERF_COUNTER_IOC_ENABLE _IO ('$', 0) -#define PERF_COUNTER_IOC_DISABLE _IO ('$', 1) -#define PERF_COUNTER_IOC_REFRESH _IO ('$', 2) -#define PERF_COUNTER_IOC_RESET _IO ('$', 3) -#define PERF_COUNTER_IOC_PERIOD _IOW('$', 4, u64) -#define PERF_COUNTER_IOC_SET_OUTPUT _IO ('$', 5) -#define PERF_COUNTER_IOC_SET_FILTER _IOW('$', 6, char *) - -enum perf_counter_ioc_flags { - PERF_IOC_FLAG_GROUP = 1U << 0, -}; - -/* - * Structure of the page that can be mapped via mmap - */ -struct perf_counter_mmap_page { - __u32 version; /* version number of this structure */ - __u32 compat_version; /* lowest version this is compat with */ - - /* - * Bits needed to read the hw counters in user-space. - * - * u32 seq; - * s64 count; - * - * do { - * seq = pc->lock; - * - * barrier() - * if (pc->index) { - * count = pmc_read(pc->index - 1); - * count += pc->offset; - * } else - * goto regular_read; - * - * barrier(); - * } while (pc->lock != seq); - * - * NOTE: for obvious reason this only works on self-monitoring - * processes. - */ - __u32 lock; /* seqlock for synchronization */ - __u32 index; /* hardware counter identifier */ - __s64 offset; /* add to hardware counter value */ - __u64 time_enabled; /* time counter active */ - __u64 time_running; /* time counter on cpu */ - - /* - * Hole for extension of the self monitor capabilities - */ - - __u64 __reserved[123]; /* align to 1k */ - - /* - * Control data for the mmap() data buffer. - * - * User-space reading the @data_head value should issue an rmb(), on - * SMP capable platforms, after reading this value -- see - * perf_counter_wakeup(). - * - * When the mapping is PROT_WRITE the @data_tail value should be - * written by userspace to reflect the last read data. In this case - * the kernel will not over-write unread data. - */ - __u64 data_head; /* head in the data section */ - __u64 data_tail; /* user-space written tail */ -}; - -#define PERF_EVENT_MISC_CPUMODE_MASK (3 << 0) -#define PERF_EVENT_MISC_CPUMODE_UNKNOWN (0 << 0) -#define PERF_EVENT_MISC_KERNEL (1 << 0) -#define PERF_EVENT_MISC_USER (2 << 0) -#define PERF_EVENT_MISC_HYPERVISOR (3 << 0) - -struct perf_event_header { - __u32 type; - __u16 misc; - __u16 size; -}; - -enum perf_event_type { - - /* - * The MMAP events record the PROT_EXEC mappings so that we can - * correlate userspace IPs to code. They have the following structure: - * - * struct { - * struct perf_event_header header; - * - * u32 pid, tid; - * u64 addr; - * u64 len; - * u64 pgoff; - * char filename[]; - * }; - */ - PERF_EVENT_MMAP = 1, - - /* - * struct { - * struct perf_event_header header; - * u64 id; - * u64 lost; - * }; - */ - PERF_EVENT_LOST = 2, - - /* - * struct { - * struct perf_event_header header; - * - * u32 pid, tid; - * char comm[]; - * }; - */ - PERF_EVENT_COMM = 3, - - /* - * struct { - * struct perf_event_header header; - * u32 pid, ppid; - * u32 tid, ptid; - * u64 time; - * }; - */ - PERF_EVENT_EXIT = 4, - - /* - * struct { - * struct perf_event_header header; - * u64 time; - * u64 id; - * u64 stream_id; - * }; - */ - PERF_EVENT_THROTTLE = 5, - PERF_EVENT_UNTHROTTLE = 6, - - /* - * struct { - * struct perf_event_header header; - * u32 pid, ppid; - * u32 tid, ptid; - * u64 time; - * }; - */ - PERF_EVENT_FORK = 7, - - /* - * struct { - * struct perf_event_header header; - * u32 pid, tid; - * - * struct read_format values; - * }; - */ - PERF_EVENT_READ = 8, - - /* - * struct { - * struct perf_event_header header; - * - * { u64 ip; } && PERF_SAMPLE_IP - * { u32 pid, tid; } && PERF_SAMPLE_TID - * { u64 time; } && PERF_SAMPLE_TIME - * { u64 addr; } && PERF_SAMPLE_ADDR - * { u64 id; } && PERF_SAMPLE_ID - * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID - * { u32 cpu, res; } && PERF_SAMPLE_CPU - * { u64 period; } && PERF_SAMPLE_PERIOD - * - * { struct read_format values; } && PERF_SAMPLE_READ - * - * { u64 nr, - * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN - * - * # - * # The RAW record below is opaque data wrt the ABI - * # - * # That is, the ABI doesn't make any promises wrt to - * # the stability of its content, it may vary depending - * # on event, hardware, kernel version and phase of - * # the moon. - * # - * # In other words, PERF_SAMPLE_RAW contents are not an ABI. - * # - * - * { u32 size; - * char data[size];}&& PERF_SAMPLE_RAW - * }; - */ - PERF_EVENT_SAMPLE = 9, - - PERF_EVENT_MAX, /* non-ABI */ -}; - -enum perf_callchain_context { - PERF_CONTEXT_HV = (__u64)-32, - PERF_CONTEXT_KERNEL = (__u64)-128, - PERF_CONTEXT_USER = (__u64)-512, - - PERF_CONTEXT_GUEST = (__u64)-2048, - PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176, - PERF_CONTEXT_GUEST_USER = (__u64)-2560, - - PERF_CONTEXT_MAX = (__u64)-4095, -}; - -#define PERF_FLAG_FD_NO_GROUP (1U << 0) -#define PERF_FLAG_FD_OUTPUT (1U << 1) - -/* - * In case some app still references the old symbols: - */ - -#define __NR_perf_counter_open __NR_perf_event_open - -#define PR_TASK_PERF_COUNTERS_DISABLE PR_TASK_PERF_EVENTS_DISABLE -#define PR_TASK_PERF_COUNTERS_ENABLE PR_TASK_PERF_EVENTS_ENABLE - -#endif /* _LINUX_PERF_COUNTER_H */ -- GitLab From 61c1917f47f73c968e92d04d15370b1dc3ec4592 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 17 Dec 2009 05:40:33 +0100 Subject: [PATCH 276/618] perf events, x86/stacktrace: Make stack walking optional The current print_context_stack helper that does the stack walking job is good for usual stacktraces as it walks through all the stack and reports even addresses that look unreliable, which is nice when we don't have frame pointers for example. But we have users like perf that only require reliable stacktraces, and those may want a more adapted stack walker, so lets make this function a callback in stacktrace_ops that users can tune for their needs. Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras LKML-Reference: <1261024834-5336-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/stacktrace.h | 18 ++++++++++++++++++ arch/x86/kernel/cpu/perf_event.c | 1 + arch/x86/kernel/dumpstack.c | 9 +++++---- arch/x86/kernel/dumpstack.h | 6 ------ arch/x86/kernel/dumpstack_32.c | 2 +- arch/x86/kernel/dumpstack_64.c | 4 ++-- arch/x86/kernel/stacktrace.c | 18 ++++++++++-------- arch/x86/oprofile/backtrace.c | 9 +++++---- kernel/trace/trace_sysprof.c | 1 + 9 files changed, 43 insertions(+), 25 deletions(-) diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h index cf86a5e73815..6c75151a3cca 100644 --- a/arch/x86/include/asm/stacktrace.h +++ b/arch/x86/include/asm/stacktrace.h @@ -5,6 +5,23 @@ extern int kstack_depth_to_print; int x86_is_stack_id(int id, char *name); +struct thread_info; +struct stacktrace_ops; + +typedef unsigned long (*walk_stack_t)(struct thread_info *tinfo, + unsigned long *stack, + unsigned long bp, + const struct stacktrace_ops *ops, + void *data, + unsigned long *end, + int *graph); + +extern unsigned long +print_context_stack(struct thread_info *tinfo, + unsigned long *stack, unsigned long bp, + const struct stacktrace_ops *ops, void *data, + unsigned long *end, int *graph); + /* Generic stack tracer with callbacks */ struct stacktrace_ops { @@ -14,6 +31,7 @@ struct stacktrace_ops { void (*address)(void *data, unsigned long address, int reliable); /* On negative return stop dumping */ int (*stack)(void *data, char *name); + walk_stack_t walk_stack; }; void dump_trace(struct task_struct *tsk, struct pt_regs *regs, diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 45506d5dd8df..d3802ee5a416 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -2336,6 +2336,7 @@ static const struct stacktrace_ops backtrace_ops = { .warning_symbol = backtrace_warning_symbol, .stack = backtrace_stack, .address = backtrace_address, + .walk_stack = print_context_stack, }; #include "../dumpstack.h" diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index 0a0aa1cec8f1..8aaa119b7cad 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -141,10 +141,11 @@ static void print_trace_address(void *data, unsigned long addr, int reliable) } static const struct stacktrace_ops print_trace_ops = { - .warning = print_trace_warning, - .warning_symbol = print_trace_warning_symbol, - .stack = print_trace_stack, - .address = print_trace_address, + .warning = print_trace_warning, + .warning_symbol = print_trace_warning_symbol, + .stack = print_trace_stack, + .address = print_trace_address, + .walk_stack = print_context_stack, }; void diff --git a/arch/x86/kernel/dumpstack.h b/arch/x86/kernel/dumpstack.h index 81086c227ab7..4fd1420faffa 100644 --- a/arch/x86/kernel/dumpstack.h +++ b/arch/x86/kernel/dumpstack.h @@ -14,12 +14,6 @@ #define get_bp(bp) asm("movq %%rbp, %0" : "=r" (bp) :) #endif -extern unsigned long -print_context_stack(struct thread_info *tinfo, - unsigned long *stack, unsigned long bp, - const struct stacktrace_ops *ops, void *data, - unsigned long *end, int *graph); - extern void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, unsigned long *stack, unsigned long bp, char *log_lvl); diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c index e0ed4c7abb62..ae775ca47b25 100644 --- a/arch/x86/kernel/dumpstack_32.c +++ b/arch/x86/kernel/dumpstack_32.c @@ -58,7 +58,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, context = (struct thread_info *) ((unsigned long)stack & (~(THREAD_SIZE - 1))); - bp = print_context_stack(context, stack, bp, ops, data, NULL, &graph); + bp = ops->walk_stack(context, stack, bp, ops, data, NULL, &graph); stack = (unsigned long *)context->previous_esp; if (!stack) diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index b13af53883aa..0ad9597073f5 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -188,8 +188,8 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, if (ops->stack(data, id) < 0) break; - bp = print_context_stack(tinfo, stack, bp, ops, - data, estack_end, &graph); + bp = ops->walk_stack(tinfo, stack, bp, ops, + data, estack_end, &graph); ops->stack(data, ""); /* * We link to the next stack via the diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index c3eb207181fe..922eefbb3f6c 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -53,17 +53,19 @@ save_stack_address_nosched(void *data, unsigned long addr, int reliable) } static const struct stacktrace_ops save_stack_ops = { - .warning = save_stack_warning, - .warning_symbol = save_stack_warning_symbol, - .stack = save_stack_stack, - .address = save_stack_address, + .warning = save_stack_warning, + .warning_symbol = save_stack_warning_symbol, + .stack = save_stack_stack, + .address = save_stack_address, + .walk_stack = print_context_stack, }; static const struct stacktrace_ops save_stack_ops_nosched = { - .warning = save_stack_warning, - .warning_symbol = save_stack_warning_symbol, - .stack = save_stack_stack, - .address = save_stack_address_nosched, + .warning = save_stack_warning, + .warning_symbol = save_stack_warning_symbol, + .stack = save_stack_stack, + .address = save_stack_address_nosched, + .walk_stack = print_context_stack, }; /* diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c index 044897be021f..3855096c59b8 100644 --- a/arch/x86/oprofile/backtrace.c +++ b/arch/x86/oprofile/backtrace.c @@ -41,10 +41,11 @@ static void backtrace_address(void *data, unsigned long addr, int reliable) } static struct stacktrace_ops backtrace_ops = { - .warning = backtrace_warning, - .warning_symbol = backtrace_warning_symbol, - .stack = backtrace_stack, - .address = backtrace_address, + .warning = backtrace_warning, + .warning_symbol = backtrace_warning_symbol, + .stack = backtrace_stack, + .address = backtrace_address, + .walk_stack = print_context_stack, }; struct frame_head { diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index f6693969287d..a7974a552ca9 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -93,6 +93,7 @@ static const struct stacktrace_ops backtrace_ops = { .warning_symbol = backtrace_warning_symbol, .stack = backtrace_stack, .address = backtrace_address, + .walk_stack = print_context_stack, }; static int -- GitLab From 06d65bda75341485d32f33da474b0664819ad497 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 17 Dec 2009 05:40:34 +0100 Subject: [PATCH 277/618] perf events, x86/stacktrace: Fix performance/softlockup by providing a special frame pointer-only stack walker It's just wasteful for stacktrace users like perf to walk through every entries on the stack whereas these only accept reliable ones, ie: that the frame pointer validates. Since perf requires pure reliable stacktraces, it needs a stack walker based on frame pointers-only to optimize the stacktrace processing. This might solve some near-lockup scenarios that can be triggered by call-graph tracing timer events. Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras LKML-Reference: <1261024834-5336-2-git-send-regression-fweisbec@gmail.com> [ v2: fix for modular builds and small detail tidyup ] Signed-off-by: Ingo Molnar --- arch/x86/include/asm/stacktrace.h | 6 ++++++ arch/x86/kernel/cpu/perf_event.c | 2 +- arch/x86/kernel/dumpstack.c | 28 ++++++++++++++++++++++++++-- 3 files changed, 33 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h index 6c75151a3cca..35e89122a42f 100644 --- a/arch/x86/include/asm/stacktrace.h +++ b/arch/x86/include/asm/stacktrace.h @@ -22,6 +22,12 @@ print_context_stack(struct thread_info *tinfo, const struct stacktrace_ops *ops, void *data, unsigned long *end, int *graph); +extern unsigned long +print_context_stack_bp(struct thread_info *tinfo, + unsigned long *stack, unsigned long bp, + const struct stacktrace_ops *ops, void *data, + unsigned long *end, int *graph); + /* Generic stack tracer with callbacks */ struct stacktrace_ops { diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index d3802ee5a416..c223b7e895d9 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -2336,7 +2336,7 @@ static const struct stacktrace_ops backtrace_ops = { .warning_symbol = backtrace_warning_symbol, .stack = backtrace_stack, .address = backtrace_address, - .walk_stack = print_context_stack, + .walk_stack = print_context_stack_bp, }; #include "../dumpstack.h" diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index 8aaa119b7cad..c56bc2873030 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -109,6 +109,30 @@ print_context_stack(struct thread_info *tinfo, } return bp; } +EXPORT_SYMBOL_GPL(print_context_stack); + +unsigned long +print_context_stack_bp(struct thread_info *tinfo, + unsigned long *stack, unsigned long bp, + const struct stacktrace_ops *ops, void *data, + unsigned long *end, int *graph) +{ + struct stack_frame *frame = (struct stack_frame *)bp; + unsigned long *ret_addr = &frame->return_address; + + while (valid_stack_ptr(tinfo, ret_addr, sizeof(*ret_addr), end)) { + unsigned long addr = *ret_addr; + + if (__kernel_text_address(addr)) { + ops->address(data, addr, 1); + frame = frame->next_frame; + ret_addr = &frame->return_address; + print_ftrace_graph_addr(addr, data, ops, tinfo, graph); + } + } + return (unsigned long)frame; +} +EXPORT_SYMBOL_GPL(print_context_stack_bp); static void @@ -143,8 +167,8 @@ static void print_trace_address(void *data, unsigned long addr, int reliable) static const struct stacktrace_ops print_trace_ops = { .warning = print_trace_warning, .warning_symbol = print_trace_warning_symbol, - .stack = print_trace_stack, - .address = print_trace_address, + .stack = print_trace_stack, + .address = print_trace_address, .walk_stack = print_context_stack, }; -- GitLab From 06777d308f8f9ddb67798d34bf193101a4bdf06c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 17 Dec 2009 04:52:13 -0500 Subject: [PATCH 278/618] dio: fix use-after-free Signed-off-by: Al Viro --- fs/direct-io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/direct-io.c b/fs/direct-io.c index 4012885d027f..e82adc2debb7 100644 --- a/fs/direct-io.c +++ b/fs/direct-io.c @@ -1206,7 +1206,7 @@ __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, * NOTE: filesystems with their own locking have to handle this * on their own. */ - if (dio->flags & DIO_LOCKING) { + if (flags & DIO_LOCKING) { if (unlikely((rw & WRITE) && retval < 0)) { loff_t isize = i_size_read(inode); if (end > isize) -- GitLab From 27f37e4bfed803be338dcc78845d4a67eefb40a0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 25 Sep 2009 09:39:26 +0200 Subject: [PATCH 279/618] regulator: add driver for MAX8660/8661 Tested with a MX25-based custom board. Signed-off-by: Wolfram Sang Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/max8660.c | 510 ++++++++++++++++++++++++++++++ include/linux/regulator/max8660.h | 57 ++++ 4 files changed, 575 insertions(+) create mode 100644 drivers/regulator/max8660.c create mode 100644 include/linux/regulator/max8660.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 7cfdd65bebb4..9e0aa14dc6af 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -69,6 +69,13 @@ config REGULATOR_MAX1586 regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. +config REGULATOR_MAX8660 + tristate "Maxim 8660/8661 voltage regulator" + depends on I2C + help + This driver controls a Maxim 8660/8661 voltage output + regulator via I2C bus. + config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC" depends on TWL4030_CORE diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 9ae3cc44e668..12285e41beec 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o +obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c new file mode 100644 index 000000000000..acc2fb7b6087 --- /dev/null +++ b/drivers/regulator/max8660.c @@ -0,0 +1,510 @@ +/* + * max8660.c -- Voltage regulation for the Maxim 8660/8661 + * + * based on max1586.c and wm8400-regulator.c + * + * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place, Suite 330, Boston, MA 02111-1307 USA + * + * Some info: + * + * Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8660-MAX8661.pdf + * + * This chip is a bit nasty because it is a write-only device. Thus, the driver + * uses shadow registers to keep track of its values. The main problem appears + * to be the initialization: When Linux boots up, we cannot know if the chip is + * in the default state or not, so we would have to pass such information in + * platform_data. As this adds a bit of complexity to the driver, this is left + * out for now until it is really needed. + * + * [A|S|M]DTV1 registers are currently not used, but [A|S|M]DTV2. + * + * If the driver is feature complete, it might be worth to check if one set of + * functions for V3-V7 is sufficient. For maximum flexibility during + * development, they are separated for now. + * + */ + +#include +#include +#include +#include +#include +#include + +#define MAX8660_DCDC_MIN_UV 725000 +#define MAX8660_DCDC_MAX_UV 1800000 +#define MAX8660_DCDC_STEP 25000 +#define MAX8660_DCDC_MAX_SEL 0x2b + +#define MAX8660_LDO5_MIN_UV 1700000 +#define MAX8660_LDO5_MAX_UV 2000000 +#define MAX8660_LDO5_STEP 25000 +#define MAX8660_LDO5_MAX_SEL 0x0c + +#define MAX8660_LDO67_MIN_UV 1800000 +#define MAX8660_LDO67_MAX_UV 3300000 +#define MAX8660_LDO67_STEP 100000 +#define MAX8660_LDO67_MAX_SEL 0x0f + +enum { + MAX8660_OVER1, + MAX8660_OVER2, + MAX8660_VCC1, + MAX8660_ADTV1, + MAX8660_ADTV2, + MAX8660_SDTV1, + MAX8660_SDTV2, + MAX8660_MDTV1, + MAX8660_MDTV2, + MAX8660_L12VCR, + MAX8660_FPWM, + MAX8660_N_REGS, /* not a real register */ +}; + +struct max8660 { + struct i2c_client *client; + u8 shadow_regs[MAX8660_N_REGS]; /* as chip is write only */ + struct regulator_dev *rdev[]; +}; + +static int max8660_write(struct max8660 *max8660, u8 reg, u8 mask, u8 val) +{ + static const u8 max8660_addresses[MAX8660_N_REGS] = + { 0x10, 0x12, 0x20, 0x23, 0x24, 0x29, 0x2a, 0x32, 0x33, 0x39, 0x80 }; + + int ret; + u8 reg_val = (max8660->shadow_regs[reg] & mask) | val; + dev_vdbg(&max8660->client->dev, "Writing reg %02x with %02x\n", + max8660_addresses[reg], reg_val); + + ret = i2c_smbus_write_byte_data(max8660->client, + max8660_addresses[reg], reg_val); + if (ret == 0) + max8660->shadow_regs[reg] = reg_val; + + return ret; +} + + +/* + * DCDC functions + */ + +static int max8660_dcdc_is_enabled(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 val = max8660->shadow_regs[MAX8660_OVER1]; + u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4; + return !!(val & mask); +} + +static int max8660_dcdc_enable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 bit = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4; + return max8660_write(max8660, MAX8660_OVER1, 0xff, bit); +} + +static int max8660_dcdc_disable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? ~1 : ~4; + return max8660_write(max8660, MAX8660_OVER1, mask, 0); +} + +static int max8660_dcdc_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_DCDC_MAX_SEL) + return -EINVAL; + return MAX8660_DCDC_MIN_UV + selector * MAX8660_DCDC_STEP; +} + +static int max8660_dcdc_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2; + u8 selector = max8660->shadow_regs[reg]; + return MAX8660_DCDC_MIN_UV + selector * MAX8660_DCDC_STEP; +} + +static int max8660_dcdc_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 reg, selector, bits; + int ret; + + if (min_uV < MAX8660_DCDC_MIN_UV || min_uV > MAX8660_DCDC_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_DCDC_MIN_UV || max_uV > MAX8660_DCDC_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_DCDC_MIN_UV - MAX8660_DCDC_STEP + 1)) + / MAX8660_DCDC_STEP; + + ret = max8660_dcdc_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2; + ret = max8660_write(max8660, reg, 0, selector); + if (ret) + return ret; + + /* Select target voltage register and activate regulation */ + bits = (rdev_get_id(rdev) == MAX8660_V3) ? 0x03 : 0x30; + return max8660_write(max8660, MAX8660_VCC1, 0xff, bits); +} + +static struct regulator_ops max8660_dcdc_ops = { + .is_enabled = max8660_dcdc_is_enabled, + .list_voltage = max8660_dcdc_list, + .set_voltage = max8660_dcdc_set, + .get_voltage = max8660_dcdc_get, +}; + + +/* + * LDO5 functions + */ + +static int max8660_ldo5_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_LDO5_MAX_SEL) + return -EINVAL; + return MAX8660_LDO5_MIN_UV + selector * MAX8660_LDO5_STEP; +} + +static int max8660_ldo5_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector = max8660->shadow_regs[MAX8660_MDTV2]; + + return MAX8660_LDO5_MIN_UV + selector * MAX8660_LDO5_STEP; +} + +static int max8660_ldo5_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector; + int ret; + + if (min_uV < MAX8660_LDO5_MIN_UV || min_uV > MAX8660_LDO5_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_LDO5_MIN_UV || max_uV > MAX8660_LDO5_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_LDO5_MIN_UV - MAX8660_LDO5_STEP + 1)) + / MAX8660_LDO5_STEP; + ret = max8660_ldo5_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + ret = max8660_write(max8660, MAX8660_MDTV2, 0, selector); + if (ret) + return ret; + + /* Select target voltage register and activate regulation */ + return max8660_write(max8660, MAX8660_VCC1, 0xff, 0xc0); +} + +static struct regulator_ops max8660_ldo5_ops = { + .list_voltage = max8660_ldo5_list, + .set_voltage = max8660_ldo5_set, + .get_voltage = max8660_ldo5_get, +}; + + +/* + * LDO67 functions + */ + +static int max8660_ldo67_is_enabled(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 val = max8660->shadow_regs[MAX8660_OVER2]; + u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4; + return !!(val & mask); +} + +static int max8660_ldo67_enable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 bit = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4; + return max8660_write(max8660, MAX8660_OVER2, 0xff, bit); +} + +static int max8660_ldo67_disable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? ~2 : ~4; + return max8660_write(max8660, MAX8660_OVER2, mask, 0); +} + +static int max8660_ldo67_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_LDO67_MAX_SEL) + return -EINVAL; + return MAX8660_LDO67_MIN_UV + selector * MAX8660_LDO67_STEP; +} + +static int max8660_ldo67_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 shift = (rdev_get_id(rdev) == MAX8660_V6) ? 0 : 4; + u8 selector = (max8660->shadow_regs[MAX8660_L12VCR] >> shift) & 0xf; + + return MAX8660_LDO67_MIN_UV + selector * MAX8660_LDO67_STEP; +} + +static int max8660_ldo67_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector; + int ret; + + if (min_uV < MAX8660_LDO67_MIN_UV || min_uV > MAX8660_LDO67_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_LDO67_MIN_UV || max_uV > MAX8660_LDO67_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_LDO67_MIN_UV - MAX8660_LDO67_STEP + 1)) + / MAX8660_LDO67_STEP; + + ret = max8660_ldo67_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + if (rdev_get_id(rdev) == MAX8660_V6) + return max8660_write(max8660, MAX8660_L12VCR, 0xf0, selector); + else + return max8660_write(max8660, MAX8660_L12VCR, 0x0f, selector << 4); +} + +static struct regulator_ops max8660_ldo67_ops = { + .is_enabled = max8660_ldo67_is_enabled, + .enable = max8660_ldo67_enable, + .disable = max8660_ldo67_disable, + .list_voltage = max8660_ldo67_list, + .get_voltage = max8660_ldo67_get, + .set_voltage = max8660_ldo67_set, +}; + +static struct regulator_desc max8660_reg[] = { + { + .name = "V3(DCDC)", + .id = MAX8660_V3, + .ops = &max8660_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_DCDC_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V4(DCDC)", + .id = MAX8660_V4, + .ops = &max8660_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_DCDC_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V5(LDO)", + .id = MAX8660_V5, + .ops = &max8660_ldo5_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO5_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V6(LDO)", + .id = MAX8660_V6, + .ops = &max8660_ldo67_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO67_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V7(LDO)", + .id = MAX8660_V7, + .ops = &max8660_ldo67_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO67_MAX_SEL + 1, + .owner = THIS_MODULE, + }, +}; + +static int max8660_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + struct regulator_dev **rdev; + struct max8660_platform_data *pdata = client->dev.platform_data; + struct max8660 *max8660; + int boot_on, i, id, ret = -EINVAL; + + if (pdata->num_subdevs > MAX8660_V_END) { + dev_err(&client->dev, "Too much regulators found!\n"); + goto out; + } + + max8660 = kzalloc(sizeof(struct max8660) + + sizeof(struct regulator_dev *) * MAX8660_V_END, + GFP_KERNEL); + if (!max8660) { + ret = -ENOMEM; + goto out; + } + + max8660->client = client; + rdev = max8660->rdev; + + if (pdata->en34_is_high) { + /* Simulate always on */ + max8660->shadow_regs[MAX8660_OVER1] = 5; + } else { + /* Otherwise devices can be toggled via software */ + max8660_dcdc_ops.enable = max8660_dcdc_enable; + max8660_dcdc_ops.disable = max8660_dcdc_disable; + } + + /* + * First, set up shadow registers to prevent glitches. As some + * registers are shared between regulators, everything must be properly + * set up for all regulators in advance. + */ + max8660->shadow_regs[MAX8660_ADTV1] = + max8660->shadow_regs[MAX8660_ADTV2] = + max8660->shadow_regs[MAX8660_SDTV1] = + max8660->shadow_regs[MAX8660_SDTV2] = 0x1b; + max8660->shadow_regs[MAX8660_MDTV1] = + max8660->shadow_regs[MAX8660_MDTV2] = 0x04; + + for (i = 0; i < pdata->num_subdevs; i++) { + + if (!pdata->subdevs[i].platform_data) + goto err_free; + + boot_on = pdata->subdevs[i].platform_data->constraints.boot_on; + + switch (pdata->subdevs[i].id) { + case MAX8660_V3: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER1] |= 1; + break; + + case MAX8660_V4: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER1] |= 4; + break; + + case MAX8660_V5: + break; + + case MAX8660_V6: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER2] |= 2; + break; + + case MAX8660_V7: + if (!strcmp(i2c_id->name, "max8661")) { + dev_err(&client->dev, "Regulator not on this chip!\n"); + goto err_free; + } + + if (boot_on) + max8660->shadow_regs[MAX8660_OVER2] |= 4; + break; + + default: + dev_err(&client->dev, "invalid regulator %s\n", + pdata->subdevs[i].name); + goto err_free; + } + } + + /* Finally register devices */ + for (i = 0; i < pdata->num_subdevs; i++) { + + id = pdata->subdevs[i].id; + + rdev[i] = regulator_register(&max8660_reg[id], &client->dev, + pdata->subdevs[i].platform_data, + max8660); + if (IS_ERR(rdev[i])) { + ret = PTR_ERR(rdev[i]); + dev_err(&client->dev, "failed to register %s\n", + max8660_reg[id].name); + goto err_unregister; + } + } + + i2c_set_clientdata(client, rdev); + dev_info(&client->dev, "Maxim 8660/8661 regulator driver loaded\n"); + return 0; + +err_unregister: + while (--i >= 0) + regulator_unregister(rdev[i]); +err_free: + kfree(max8660); +out: + return ret; +} + +static int max8660_remove(struct i2c_client *client) +{ + struct regulator_dev **rdev = i2c_get_clientdata(client); + int i; + + for (i = 0; i < MAX8660_V_END; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + kfree(rdev); + i2c_set_clientdata(client, NULL); + + return 0; +} + +static const struct i2c_device_id max8660_id[] = { + { "max8660", 0 }, + { "max8661", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max8660_id); + +static struct i2c_driver max8660_driver = { + .probe = max8660_probe, + .remove = max8660_remove, + .driver = { + .name = "max8660", + }, + .id_table = max8660_id, +}; + +static int __init max8660_init(void) +{ + return i2c_add_driver(&max8660_driver); +} +subsys_initcall(max8660_init); + +static void __exit max8660_exit(void) +{ + i2c_del_driver(&max8660_driver); +} +module_exit(max8660_exit); + +/* Module information */ +MODULE_DESCRIPTION("MAXIM 8660/8661 voltage regulator driver"); +MODULE_AUTHOR("Wolfram Sang"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/regulator/max8660.h b/include/linux/regulator/max8660.h new file mode 100644 index 000000000000..9936763621c7 --- /dev/null +++ b/include/linux/regulator/max8660.h @@ -0,0 +1,57 @@ +/* + * max8660.h -- Voltage regulation for the Maxim 8660/8661 + * + * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_REGULATOR_MAX8660_H +#define __LINUX_REGULATOR_MAX8660_H + +#include + +enum { + MAX8660_V3, + MAX8660_V4, + MAX8660_V5, + MAX8660_V6, + MAX8660_V7, + MAX8660_V_END, +}; + +/** + * max8660_subdev_data - regulator subdev data + * @id: regulator id + * @name: regulator name + * @platform_data: regulator init data + */ +struct max8660_subdev_data { + int id; + char *name; + struct regulator_init_data *platform_data; +}; + +/** + * max8660_platform_data - platform data for max8660 + * @num_subdevs: number of regulators used + * @subdevs: pointer to regulators used + * @en34_is_high: if EN34 is driven high, regulators cannot be en-/disabled. + */ +struct max8660_platform_data { + int num_subdevs; + struct max8660_subdev_data *subdevs; + unsigned en34_is_high:1; +}; +#endif -- GitLab From e24a04c44cf312e88b50006a91ad7ffc1c0d97a5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 22 Sep 2009 08:47:11 -0700 Subject: [PATCH 280/618] regulator: Implement WM831x BuckWise DC-DC convertor DVS support The BuckWise DC-DC convertors in WM831x devices support switching to a second output voltage using the logic level on one of the device pins. This is intended to allow rapid voltage switching for uses like cpufreq, replacing the I2C or SPI write used to configure the voltage of the regulator with a much faster GPIO status change. This is implemented by keeping the DVS voltage configured as the maximum voltage permitted for the regulator. If a request is made for the maximum voltage then the GPIO is used to switch to the DVS voltage, otherwise the normal ON voltage is updated and used. This follows the idiom used by most cpufreq drivers, which drop the minimum voltage as the core frequency is dropped but use a constant maximum - raising the voltage should normally be fast, but lowering it may be slower. Configuration of the DVS MFP on the device should be done externally, for example via OTP. Support is present in the hardware for monitoring the status of the transition using a second GPIO. This is not currently implemented but platform data is provided for it - the driver currently assumes that the device will be configured to transition immediately - but platform data is provided to reduce merge issues once it is. Signed-off-by: Mark Brown Acked-by: Samuel Ortiz Signed-off-by: Liam Girdwood --- drivers/regulator/wm831x-dcdc.c | 207 ++++++++++++++++++++++++++++--- include/linux/mfd/wm831x/pdata.h | 17 +++ 2 files changed, 206 insertions(+), 18 deletions(-) diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 2eefc1a0cf08..0a6577577e8d 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -19,6 +19,8 @@ #include #include #include +#include +#include #include #include @@ -39,6 +41,7 @@ #define WM831X_DCDC_CONTROL_2 1 #define WM831X_DCDC_ON_CONFIG 2 #define WM831X_DCDC_SLEEP_CONTROL 3 +#define WM831X_DCDC_DVS_CONTROL 4 /* * Shared @@ -50,6 +53,10 @@ struct wm831x_dcdc { int base; struct wm831x *wm831x; struct regulator_dev *regulator; + int dvs_gpio; + int dvs_gpio_state; + int on_vsel; + int dvs_vsel; }; static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev) @@ -240,11 +247,9 @@ static int wm831x_buckv_list_voltage(struct regulator_dev *rdev, return -EINVAL; } -static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg, - int min_uV, int max_uV) +static int wm831x_buckv_select_min_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) { - struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - struct wm831x *wm831x = dcdc->wm831x; u16 vsel; if (min_uV < 600000) @@ -257,39 +262,126 @@ static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg, if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV) return -EINVAL; - return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel); + return vsel; +} + +static int wm831x_buckv_select_max_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + u16 vsel; + + if (max_uV < 600000 || max_uV > 1800000) + return -EINVAL; + + vsel = ((max_uV - 600000) / 12500) + 8; + + if (wm831x_buckv_list_voltage(rdev, vsel) < min_uV || + wm831x_buckv_list_voltage(rdev, vsel) < max_uV) + return -EINVAL; + + return vsel; +} + +static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + + if (state == dcdc->dvs_gpio_state) + return 0; + + dcdc->dvs_gpio_state = state; + gpio_set_value(dcdc->dvs_gpio, state); + + /* Should wait for DVS state change to be asserted if we have + * a GPIO for it, for now assume the device is configured + * for the fastest possible transition. + */ + + return 0; } static int wm831x_buckv_set_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV) + int min_uV, int max_uV) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + struct wm831x *wm831x = dcdc->wm831x; + int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL; + int vsel, ret; + + vsel = wm831x_buckv_select_min_voltage(rdev, min_uV, max_uV); + if (vsel < 0) + return vsel; + + /* If this value is already set then do a GPIO update if we can */ + if (dcdc->dvs_gpio && dcdc->on_vsel == vsel) + return wm831x_buckv_set_dvs(rdev, 0); + + if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel) + return wm831x_buckv_set_dvs(rdev, 1); + + /* Always set the ON status to the minimum voltage */ + ret = wm831x_set_bits(wm831x, on_reg, WM831X_DC1_ON_VSEL_MASK, vsel); + if (ret < 0) + return ret; + dcdc->on_vsel = vsel; + + if (!dcdc->dvs_gpio) + return ret; + + /* Kick the voltage transition now */ + ret = wm831x_buckv_set_dvs(rdev, 0); + if (ret < 0) + return ret; + + /* Set the high voltage as the DVS voltage. This is optimised + * for CPUfreq usage, most processors will keep the maximum + * voltage constant and lower the minimum with the frequency. */ + vsel = wm831x_buckv_select_max_voltage(rdev, min_uV, max_uV); + if (vsel < 0) { + /* This should never happen - at worst the same vsel + * should be chosen */ + WARN_ON(vsel < 0); + return 0; + } + + /* Don't bother if it's the same VSEL we're already using */ + if (vsel == dcdc->on_vsel) + return 0; - return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV); + ret = wm831x_set_bits(wm831x, dvs_reg, WM831X_DC1_DVS_VSEL_MASK, vsel); + if (ret == 0) + dcdc->dvs_vsel = vsel; + else + dev_warn(wm831x->dev, "Failed to set DCDC DVS VSEL: %d\n", + ret); + + return 0; } static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev, - int uV) + int uV) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; + int vsel; + + vsel = wm831x_buckv_select_min_voltage(rdev, uV, uV); + if (vsel < 0) + return vsel; - return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV); + return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel); } static int wm831x_buckv_get_voltage(struct regulator_dev *rdev) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - struct wm831x *wm831x = dcdc->wm831x; - u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; - int val; - val = wm831x_reg_read(wm831x, reg); - if (val < 0) - return val; - - return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK); + if (dcdc->dvs_gpio && dcdc->dvs_gpio_state) + return wm831x_buckv_list_voltage(rdev, dcdc->dvs_vsel); + else + return wm831x_buckv_list_voltage(rdev, dcdc->on_vsel); } /* Current limit options */ @@ -346,6 +438,64 @@ static struct regulator_ops wm831x_buckv_ops = { .set_suspend_mode = wm831x_dcdc_set_suspend_mode, }; +/* + * Set up DVS control. We just log errors since we can still run + * (with reduced performance) if we fail. + */ +static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc, + struct wm831x_buckv_pdata *pdata) +{ + struct wm831x *wm831x = dcdc->wm831x; + int ret; + u16 ctrl; + + if (!pdata || !pdata->dvs_gpio) + return; + + switch (pdata->dvs_control_src) { + case 1: + ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT; + break; + case 2: + ctrl = 3 << WM831X_DC1_DVS_SRC_SHIFT; + break; + default: + dev_err(wm831x->dev, "Invalid DVS control source %d for %s\n", + pdata->dvs_control_src, dcdc->name); + return; + } + + ret = wm831x_set_bits(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL, + WM831X_DC1_DVS_SRC_MASK, ctrl); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to set %s DVS source: %d\n", + dcdc->name, ret); + return; + } + + ret = gpio_request(pdata->dvs_gpio, "DCDC DVS"); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n", + dcdc->name, ret); + return; + } + + /* gpiolib won't let us read the GPIO status so pick the higher + * of the two existing voltages so we take it as platform data. + */ + dcdc->dvs_gpio_state = pdata->dvs_init_state; + + ret = gpio_direction_output(pdata->dvs_gpio, dcdc->dvs_gpio_state); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to enable %s DVS GPIO: %d\n", + dcdc->name, ret); + gpio_free(pdata->dvs_gpio); + return; + } + + dcdc->dvs_gpio = pdata->dvs_gpio; +} + static __devinit int wm831x_buckv_probe(struct platform_device *pdev) { struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); @@ -384,6 +534,23 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev) dcdc->desc.ops = &wm831x_buckv_ops; dcdc->desc.owner = THIS_MODULE; + ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret); + goto err; + } + dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK; + + ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret); + goto err; + } + dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK; + + if (pdata->dcdc[id]) + wm831x_buckv_dvs_init(dcdc, pdata->dcdc[id]->driver_data); + dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, pdata->dcdc[id], dcdc); if (IS_ERR(dcdc->regulator)) { @@ -422,6 +589,8 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev) err_regulator: regulator_unregister(dcdc->regulator); err: + if (dcdc->dvs_gpio) + gpio_free(dcdc->dvs_gpio); kfree(dcdc); return ret; } @@ -434,6 +603,8 @@ static __devexit int wm831x_buckv_remove(struct platform_device *pdev) wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc); wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); regulator_unregister(dcdc->regulator); + if (dcdc->dvs_gpio) + gpio_free(dcdc->dvs_gpio); kfree(dcdc); return 0; diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index 415c228743d5..fd322aca33ba 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -41,6 +41,23 @@ struct wm831x_battery_pdata { int timeout; /** Charge cycle timeout, in minutes */ }; +/** + * Configuration for the WM831x DC-DC BuckWise convertors. This + * should be passed as driver_data in the regulator_init_data. + * + * Currently all the configuration is for the fast DVS switching + * support of the devices. This allows MFPs on the device to be + * configured as an input to switch between two output voltages, + * allowing voltage transitions without the expense of an access over + * I2C or SPI buses. + */ +struct wm831x_buckv_pdata { + int dvs_gpio; /** CPU GPIO to use for DVS switching */ + int dvs_control_src; /** Hardware DVS source to use (1 or 2) */ + int dvs_init_state; /** DVS state to expect on startup */ + int dvs_state_gpio; /** CPU GPIO to use for monitoring status */ +}; + /* Sources for status LED configuration. Values are register values * plus 1 to allow for a zero default for preserve. */ -- GitLab From be0e2d3e802908e2a3ca620ba8f49ecab87982b2 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Thu, 8 Oct 2009 02:03:57 -0400 Subject: [PATCH 281/618] regulator: add 88PM8607 PMIC driver Hi Liam, Since Samuel merged a new version of mfd 88pm8607 driver, I format a new patch on regulator 88pm8607. I paste the new patch in mail. Please help to review again. And I also attach the mfd driver in mail. From: Haojian Zhuang Date: Thu, 8 Oct 2009 09:36:53 -0400 Subject: [PATCH] regulator: Add 88PM8607 PMIC driver This patch adds regulator drivers for Marvell 88PM8607 PMIC. This controller contains 3 DVC and 14 LDO regulators. This controller uses I2C interface. Signed-off-by: Haojian Zhuang Signed-off-by: Liam Girdwood --- drivers/regulator/88pm8607.c | 684 +++++++++++++++++++++++++++++++++++ drivers/regulator/Kconfig | 6 + drivers/regulator/Makefile | 1 + 3 files changed, 691 insertions(+) create mode 100644 drivers/regulator/88pm8607.c diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c new file mode 100644 index 000000000000..e1aabdaabf23 --- /dev/null +++ b/drivers/regulator/88pm8607.c @@ -0,0 +1,684 @@ +/* + * Regulators driver for Marvell 88PM8607 + * + * Copyright (C) 2009 Marvell International Ltd. + * Haojian Zhuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include + +struct pm8607_regulator_info { + struct regulator_desc desc; + struct pm8607_chip *chip; + struct regulator_dev *regulator; + + int min_uV; + int max_uV; + int step_uV; + int vol_reg; + int vol_shift; + int vol_nbits; + int update_reg; + int update_bit; + int enable_reg; + int enable_bit; + int slope_double; +}; + +static inline int check_range(struct pm8607_regulator_info *info, + int min_uV, int max_uV) +{ + if (max_uV < info->min_uV || min_uV > info->max_uV || min_uV > max_uV) + return -EINVAL; + + return 0; +} + +static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + uint8_t chip_id = info->chip->chip_id; + int ret = -EINVAL; + + switch (info->desc.id) { + case PM8607_ID_BUCK1: + ret = (index < 0x1d) ? (index * 25000 + 800000) : + ((index < 0x20) ? 1500000 : + ((index < 0x40) ? ((index - 0x20) * 25000) : + -EINVAL)); + break; + case PM8607_ID_BUCK3: + ret = (index < 0x3d) ? (index * 25000) : + ((index < 0x40) ? 1500000 : -EINVAL); + if (ret < 0) + break; + if (info->slope_double) + ret <<= 1; + break; + case PM8607_ID_LDO1: + ret = (index == 0) ? 1800000 : + ((index == 1) ? 1200000 : + ((index == 2) ? 2800000 : -EINVAL)); + break; + case PM8607_ID_LDO5: + ret = (index == 0) ? 2900000 : + ((index == 1) ? 3000000 : + ((index == 2) ? 3100000 : 3300000)); + break; + case PM8607_ID_LDO7: + case PM8607_ID_LDO8: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_ID_LDO12: + ret = (index < 2) ? (index * 100000 + 1800000) : + ((index < 7) ? (index * 100000 + 2500000) : + ((index == 7) ? 3300000 : 1200000)); + break; + case PM8607_ID_LDO2: + case PM8607_ID_LDO3: + case PM8607_ID_LDO9: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2550000) : + 3300000); + break; + } + break; + case PM8607_ID_LDO4: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 6) ? (index * 50000 + 2550000) : + ((index == 6) ? 2900000 : 3300000)); + break; + } + break; + case PM8607_ID_LDO6: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2450000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 2) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2500000) : + 3300000); + break; + } + break; + case PM8607_ID_LDO10: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + 1200000); + break; + case PM8607_CHIP_B0: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2550000) : + ((index == 7) ? 3300000 : 1200000)); + break; + } + break; + case PM8607_ID_LDO14: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 2) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2600000) : + 3300000); + break; + } + break; + } + return ret; +} + +static int choose_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + uint8_t chip_id = info->chip->chip_id; + int val, ret; + + switch (info->desc.id) { + case PM8607_ID_BUCK1: + if (min_uV >= 800000) /* 800mV ~ 1500mV / 25mV */ + val = (min_uV - 775001) / 25000; + else { /* 25mV ~ 775mV / 25mV */ + val = (min_uV + 249999) / 25000; + val += 32; + } + break; + case PM8607_ID_BUCK3: + if (info->slope_double) + min_uV = min_uV >> 1; + val = (min_uV + 249999) / 25000; /* 0mV ~ 1500mV / 25mV */ + + break; + case PM8607_ID_LDO1: + if (min_uV > 1800000) + val = 2; + else if (min_uV > 1200000) + val = 0; + else + val = 1; + break; + case PM8607_ID_LDO5: + if (min_uV > 3100000) + val = 3; + else /* 2900mV ~ 3100mV / 100mV */ + val = (min_uV - 2800001) / 100000; + break; + case PM8607_ID_LDO7: + case PM8607_ID_LDO8: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; /* 1800mv */ + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_ID_LDO10: + if (min_uV > 2850000) + val = 7; + else if (min_uV <= 1200000) + val = 8; + else if (min_uV < 2700000) /* 1800mV ~ 1900mV / 50mV */ + val = (min_uV - 1750001) / 50000; + else { /* 2700mV ~ 2850mV / 50mV */ + val = (min_uV - 2650001) / 50000; + val += 3; + } + break; + case PM8607_ID_LDO12: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 100mV */ + if (min_uV <= 1200000) + val = 8; /* 1200mV */ + else if (min_uV <= 1800000) + val = 0; /* 1800mV */ + else if (min_uV <= 1900000) + val = (min_uV - 1700001) / 100000; + else + val = 2; /* 2700mV */ + } else { /* 2700mV ~ 3100mV / 100mV */ + if (min_uV <= 3100000) { + val = (min_uV - 2600001) / 100000; + val += 2; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + case PM8607_ID_LDO2: + case PM8607_ID_LDO3: + case PM8607_ID_LDO9: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2700000) /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2850mV / 50mV */ + if (min_uV <= 2850000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + case PM8607_ID_LDO4: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2700000) /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2800mV / 50mV */ + if (min_uV <= 2850000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else if (min_uV <= 2900000) + val = 6; + else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + case PM8607_ID_LDO6: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2600000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2600mV */ + } else { /* 2600mV ~ 2800mV / 50mV */ + if (min_uV <= 2800000) { + val = (min_uV - 2550001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2600000) { /* 1800mV ~ 1850mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1850000) + val = (min_uV - 1750001) / 50000; + else + val = 2; /* 2600mV */ + } else { /* 2600mV ~ 2800mV / 50mV */ + if (min_uV <= 2800000) { + val = (min_uV - 2550001) / 50000; + val += 2; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + case PM8607_ID_LDO14: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2700000) { /* 1800mV ~ 1850mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1850000) + val = (min_uV - 1750001) / 50000; + else + val = 2; /* 2700mV */ + } else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 2; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + } + if (val >= 0) { + ret = pm8607_list_voltage(rdev, val); + if (ret > max_uV) { + pr_err("exceed voltage range (%d %d) uV", + min_uV, max_uV); + return -EINVAL; + } + } else + pr_err("invalid voltage range (%d %d) uV", min_uV, max_uV); + return val; +} + +static int pm8607_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + uint8_t val, mask; + int ret; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); + return -EINVAL; + } + + ret = choose_voltage(rdev, min_uV, max_uV); + if (ret < 0) + return -EINVAL; + val = (uint8_t)(ret << info->vol_shift); + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + ret = pm8607_set_bits(chip, info->vol_reg, mask, val); + if (ret) + return ret; + switch (info->desc.id) { + case PM8607_ID_BUCK1: + case PM8607_ID_BUCK3: + ret = pm8607_set_bits(chip, info->update_reg, + 1 << info->update_bit, + 1 << info->update_bit); + break; + } + return ret; +} + +static int pm8607_get_voltage(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + uint8_t val, mask; + int ret; + + ret = pm8607_reg_read(chip, info->vol_reg); + if (ret < 0) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = ((unsigned char)ret & mask) >> info->vol_shift; + + return pm8607_list_voltage(rdev, val); +} + +static int pm8607_enable(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + + return pm8607_set_bits(chip, info->enable_reg, + 1 << info->enable_bit, + 1 << info->enable_bit); +} + +static int pm8607_disable(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + + return pm8607_set_bits(chip, info->enable_reg, + 1 << info->enable_bit, 0); +} + +static int pm8607_is_enabled(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + int ret; + + ret = pm8607_reg_read(chip, info->enable_reg); + if (ret < 0) + return ret; + + return !!((unsigned char)ret & (1 << info->enable_bit)); +} + +static struct regulator_ops pm8607_regulator_ops = { + .set_voltage = pm8607_set_voltage, + .get_voltage = pm8607_get_voltage, + .enable = pm8607_enable, + .disable = pm8607_disable, + .is_enabled = pm8607_is_enabled, +}; + +#define PM8607_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ +{ \ + .desc = { \ + .name = "BUCK" #_id, \ + .ops = &pm8607_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PM8607_ID_BUCK##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = PM8607_##vreg, \ + .vol_shift = (0), \ + .vol_nbits = (nbits), \ + .update_reg = PM8607_##ureg, \ + .update_bit = (ubit), \ + .enable_reg = PM8607_##ereg, \ + .enable_bit = (ebit), \ + .slope_double = (0), \ +} + +#define PM8607_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ +{ \ + .desc = { \ + .name = "LDO" #_id, \ + .ops = &pm8607_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PM8607_ID_LDO##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = PM8607_##vreg, \ + .vol_shift = (shift), \ + .vol_nbits = (nbits), \ + .enable_reg = PM8607_##ereg, \ + .enable_bit = (ebit), \ + .slope_double = (0), \ +} + +static struct pm8607_regulator_info pm8607_regulator_info[] = { + PM8607_DVC(1, 0, 1500, 25, BUCK1, 6, GO, 0, SUPPLIES_EN11, 0), + PM8607_DVC(3, 0, 1500, 25, BUCK3, 6, GO, 2, SUPPLIES_EN11, 2), + + PM8607_LDO(1 , 1200, 2800, 0, LDO1 , 0, 2, SUPPLIES_EN11, 3), + PM8607_LDO(2 , 1800, 3300, 0, LDO2 , 0, 3, SUPPLIES_EN11, 4), + PM8607_LDO(3 , 1800, 3300, 0, LDO3 , 0, 3, SUPPLIES_EN11, 5), + PM8607_LDO(4 , 1800, 3300, 0, LDO4 , 0, 3, SUPPLIES_EN11, 6), + PM8607_LDO(5 , 2900, 3300, 0, LDO5 , 0, 2, SUPPLIES_EN11, 7), + PM8607_LDO(6 , 1800, 3300, 0, LDO6 , 0, 3, SUPPLIES_EN12, 0), + PM8607_LDO(7 , 1800, 2900, 0, LDO7 , 0, 3, SUPPLIES_EN12, 1), + PM8607_LDO(8 , 1800, 2900, 0, LDO8 , 0, 3, SUPPLIES_EN12, 2), + PM8607_LDO(9 , 1800, 3300, 0, LDO9 , 0, 3, SUPPLIES_EN12, 3), + PM8607_LDO(10, 1200, 3300, 0, LDO10, 0, 4, SUPPLIES_EN11, 4), + PM8607_LDO(12, 1200, 3300, 0, LDO12, 0, 4, SUPPLIES_EN11, 5), + PM8607_LDO(14, 1800, 3300, 0, LDO14, 0, 3, SUPPLIES_EN11, 6), +}; + +static inline struct pm8607_regulator_info *find_regulator_info(int id) +{ + struct pm8607_regulator_info *info; + int i; + + for (i = 0; i < ARRAY_SIZE(pm8607_regulator_info); i++) { + info = &pm8607_regulator_info[i]; + if (info->desc.id == id) + return info; + } + return NULL; +} + +static int __devinit pm8607_regulator_probe(struct platform_device *pdev) +{ + struct pm8607_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm8607_platform_data *pdata = chip->dev->platform_data; + struct pm8607_regulator_info *info = NULL; + + info = find_regulator_info(pdev->id); + if (info == NULL) { + dev_err(&pdev->dev, "invalid regulator ID specified\n"); + return -EINVAL; + } + + info->chip = chip; + + info->regulator = regulator_register(&info->desc, &pdev->dev, + pdata->regulator[pdev->id], info); + if (IS_ERR(info->regulator)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + info->desc.name); + return PTR_ERR(info->regulator); + } + + /* check DVC ramp slope double */ + if (info->desc.id == PM8607_ID_BUCK3) + if (info->chip->buck3_double) + info->slope_double = 1; + + platform_set_drvdata(pdev, info); + return 0; +} + +static int __devexit pm8607_regulator_remove(struct platform_device *pdev) +{ + struct pm8607_regulator_info *info = platform_get_drvdata(pdev); + + regulator_unregister(info->regulator); + return 0; +} + +#define PM8607_REGULATOR_DRIVER(_name) \ +{ \ + .driver = { \ + .name = "88pm8607-" #_name, \ + .owner = THIS_MODULE, \ + }, \ + .probe = pm8607_regulator_probe, \ + .remove = __devexit_p(pm8607_regulator_remove), \ +} + +static struct platform_driver pm8607_regulator_driver[] = { + PM8607_REGULATOR_DRIVER(buck1), + PM8607_REGULATOR_DRIVER(buck2), + PM8607_REGULATOR_DRIVER(buck3), + PM8607_REGULATOR_DRIVER(ldo1), + PM8607_REGULATOR_DRIVER(ldo2), + PM8607_REGULATOR_DRIVER(ldo3), + PM8607_REGULATOR_DRIVER(ldo4), + PM8607_REGULATOR_DRIVER(ldo5), + PM8607_REGULATOR_DRIVER(ldo6), + PM8607_REGULATOR_DRIVER(ldo7), + PM8607_REGULATOR_DRIVER(ldo8), + PM8607_REGULATOR_DRIVER(ldo9), + PM8607_REGULATOR_DRIVER(ldo10), + PM8607_REGULATOR_DRIVER(ldo12), + PM8607_REGULATOR_DRIVER(ldo14), +}; + +static int __init pm8607_regulator_init(void) +{ + int i, count, ret; + + count = ARRAY_SIZE(pm8607_regulator_driver); + for (i = 0; i < count; i++) { + ret = platform_driver_register(&pm8607_regulator_driver[i]); + if (ret != 0) + pr_err("Failed to register regulator driver: %d\n", + ret); + } + return 0; +} +subsys_initcall(pm8607_regulator_init); + +static void __exit pm8607_regulator_exit(void) +{ + int i, count; + + count = ARRAY_SIZE(pm8607_regulator_driver); + for (i = 0; i < count; i++) + platform_driver_unregister(&pm8607_regulator_driver[i]); +} +module_exit(pm8607_regulator_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Haojian Zhuang "); +MODULE_DESCRIPTION("Regulator Driver for Marvell 88PM8607 PMIC"); +MODULE_ALIAS("platform:88pm8607-regulator"); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 9e0aa14dc6af..262f62eec837 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -164,5 +164,11 @@ config REGULATOR_TPS6507X three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. +config REGULATOR_88PM8607 + bool "Marvell 88PM8607 Power regulators" + depends on MFD_88PM8607=y + help + This driver supports 88PM8607 voltage regulator chips. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 12285e41beec..499ed079811f 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -26,5 +26,6 @@ obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o +obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG -- GitLab From 5b307627738f1f6cbc31fad9e28a299b5fe55602 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 13 Oct 2009 13:06:49 +0100 Subject: [PATCH 282/618] regulator: Report error codes for bulk operations If we're going to log an error we may as well log what the error code that we're failing on is. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index efe568deda12..9b43dab16387 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1885,9 +1885,9 @@ int regulator_bulk_get(struct device *dev, int num_consumers, consumers[i].consumer = regulator_get(dev, consumers[i].supply); if (IS_ERR(consumers[i].consumer)) { - dev_err(dev, "Failed to get supply '%s'\n", - consumers[i].supply); ret = PTR_ERR(consumers[i].consumer); + dev_err(dev, "Failed to get supply '%s': %d\n", + consumers[i].supply, ret); consumers[i].consumer = NULL; goto err; } @@ -1930,7 +1930,7 @@ int regulator_bulk_enable(int num_consumers, return 0; err: - printk(KERN_ERR "Failed to enable %s\n", consumers[i].supply); + printk(KERN_ERR "Failed to enable %s: %d\n", consumers[i].supply, ret); for (i = 0; i < num_consumers; i++) regulator_disable(consumers[i].consumer); @@ -1965,7 +1965,8 @@ int regulator_bulk_disable(int num_consumers, return 0; err: - printk(KERN_ERR "Failed to disable %s\n", consumers[i].supply); + printk(KERN_ERR "Failed to disable %s: %d\n", consumers[i].supply, + ret); for (i = 0; i < num_consumers; i++) regulator_enable(consumers[i].consumer); -- GitLab From e79055d62ea6ca3c36962209f4c819614972c95a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 19 Oct 2009 15:53:50 +0100 Subject: [PATCH 283/618] regulator: Factor out voltage constraint setup This allows constraints to take effect on regulators that support voltage setting but for which the board does not specify a voltage range (for example, because it is fixed correctly at system startup). Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 64 +++++++++++++++++++++++----------------- 1 file changed, 37 insertions(+), 27 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9b43dab16387..c1a49917af24 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -672,31 +672,11 @@ static void print_constraints(struct regulator_dev *rdev) printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf); } -/** - * set_machine_constraints - sets regulator constraints - * @rdev: regulator source - * @constraints: constraints to apply - * - * Allows platform initialisation code to define and constrain - * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: - * Constraints *must* be set by platform code in order for some - * regulator operations to proceed i.e. set_voltage, set_current_limit, - * set_mode. - */ -static int set_machine_constraints(struct regulator_dev *rdev, - struct regulation_constraints *constraints) +static int machine_constraints_voltage(struct regulator_dev *rdev, + const char *name, struct regulation_constraints *constraints) { - int ret = 0; - const char *name; struct regulator_ops *ops = rdev->desc->ops; - if (constraints->name) - name = constraints->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = "regulator"; - /* constrain machine-level voltage specs to fit * the actual range supported by this regulator. */ @@ -719,14 +699,13 @@ static int set_machine_constraints(struct regulator_dev *rdev, /* voltage constraints are optional */ if ((cmin == 0) && (cmax == 0)) - goto out; + return 0; /* else require explicit machine-level constraints */ if (cmin <= 0 || cmax <= 0 || cmax < cmin) { pr_err("%s: %s '%s' voltage constraints\n", __func__, "invalid", name); - ret = -EINVAL; - goto out; + return -EINVAL; } /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */ @@ -748,8 +727,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, if (max_uV < min_uV) { pr_err("%s: %s '%s' voltage constraints\n", __func__, "unsupportable", name); - ret = -EINVAL; - goto out; + return -EINVAL; } /* use regulator's subset of machine constraints */ @@ -767,6 +745,38 @@ static int set_machine_constraints(struct regulator_dev *rdev, } } + return 0; +} + +/** + * set_machine_constraints - sets regulator constraints + * @rdev: regulator source + * @constraints: constraints to apply + * + * Allows platform initialisation code to define and constrain + * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: + * Constraints *must* be set by platform code in order for some + * regulator operations to proceed i.e. set_voltage, set_current_limit, + * set_mode. + */ +static int set_machine_constraints(struct regulator_dev *rdev, + struct regulation_constraints *constraints) +{ + int ret = 0; + const char *name; + struct regulator_ops *ops = rdev->desc->ops; + + if (constraints->name) + name = constraints->name; + else if (rdev->desc->name) + name = rdev->desc->name; + else + name = "regulator"; + + ret = machine_constraints_voltage(rdev, name, constraints); + if (ret != 0) + goto out; + rdev->constraints = constraints; /* do we need to apply the constraint voltage */ -- GitLab From af5866c9cdc9e43ef775a14765fd8eab95c7fd20 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 22 Oct 2009 16:31:30 +0100 Subject: [PATCH 284/618] regulator: Also lift apply_uV into machine_constraints_voltage() It makes sense to do all the voltage configuration in the one split out function. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 35 ++++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index c1a49917af24..1848a3f0980e 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -676,6 +676,22 @@ static int machine_constraints_voltage(struct regulator_dev *rdev, const char *name, struct regulation_constraints *constraints) { struct regulator_ops *ops = rdev->desc->ops; + int ret; + + /* do we need to apply the constraint voltage */ + if (rdev->constraints->apply_uV && + rdev->constraints->min_uV == rdev->constraints->max_uV && + ops->set_voltage) { + ret = ops->set_voltage(rdev, + rdev->constraints->min_uV, rdev->constraints->max_uV); + if (ret < 0) { + printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n", + __func__, + rdev->constraints->min_uV, name); + rdev->constraints = NULL; + return ret; + } + } /* constrain machine-level voltage specs to fit * the actual range supported by this regulator. @@ -773,27 +789,12 @@ static int set_machine_constraints(struct regulator_dev *rdev, else name = "regulator"; + rdev->constraints = constraints; + ret = machine_constraints_voltage(rdev, name, constraints); if (ret != 0) goto out; - rdev->constraints = constraints; - - /* do we need to apply the constraint voltage */ - if (rdev->constraints->apply_uV && - rdev->constraints->min_uV == rdev->constraints->max_uV && - ops->set_voltage) { - ret = ops->set_voltage(rdev, - rdev->constraints->min_uV, rdev->constraints->max_uV); - if (ret < 0) { - printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n", - __func__, - rdev->constraints->min_uV, name); - rdev->constraints = NULL; - goto out; - } - } - /* do we need to setup our suspend state */ if (constraints->initial_state) { ret = suspend_prepare(rdev, constraints->initial_state); -- GitLab From 8f031b48cd2eab5fc3e4dffa06706372e90d63fe Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 22 Oct 2009 16:31:31 +0100 Subject: [PATCH 285/618] regulator: Display actual settings with constraints When voltage or current constraints are either missing or specify a range display the actual setting along with the constraints if we can. This can aid debugging of configuration problems. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 44 ++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 13 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 1848a3f0980e..d3be67e18519 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -641,25 +641,43 @@ static void print_constraints(struct regulator_dev *rdev) { struct regulation_constraints *constraints = rdev->constraints; char buf[80]; - int count; + int count = 0; + int ret; - if (rdev->desc->type == REGULATOR_VOLTAGE) { + if (constraints->min_uV && constraints->max_uV) { if (constraints->min_uV == constraints->max_uV) - count = sprintf(buf, "%d mV ", - constraints->min_uV / 1000); + count += sprintf(buf + count, "%d mV ", + constraints->min_uV / 1000); else - count = sprintf(buf, "%d <--> %d mV ", - constraints->min_uV / 1000, - constraints->max_uV / 1000); - } else { + count += sprintf(buf + count, "%d <--> %d mV ", + constraints->min_uV / 1000, + constraints->max_uV / 1000); + } + + if (!constraints->min_uV || + constraints->min_uV != constraints->max_uV) { + ret = _regulator_get_voltage(rdev); + if (ret > 0) + count += sprintf(buf + count, "at %d mV ", ret / 1000); + } + + if (constraints->min_uA && constraints->max_uA) { if (constraints->min_uA == constraints->max_uA) - count = sprintf(buf, "%d mA ", - constraints->min_uA / 1000); + count += sprintf(buf + count, "%d mA ", + constraints->min_uA / 1000); else - count = sprintf(buf, "%d <--> %d mA ", - constraints->min_uA / 1000, - constraints->max_uA / 1000); + count += sprintf(buf + count, "%d <--> %d mA ", + constraints->min_uA / 1000, + constraints->max_uA / 1000); } + + if (!constraints->min_uA || + constraints->min_uA != constraints->max_uA) { + ret = _regulator_get_current_limit(rdev); + if (ret > 0) + count += sprintf(buf + count, "at %d uA ", ret / 1000); + } + if (constraints->valid_modes_mask & REGULATOR_MODE_FAST) count += sprintf(buf + count, "fast "); if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL) -- GitLab From 1083c39346d482b9001944d05c09191027892226 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 22 Oct 2009 16:31:32 +0100 Subject: [PATCH 286/618] regulator: Factor out regulator name pretty printing Some of the regulator API functions have code to allow the machine constraints to override the device supplied name for the regulator in the constraints in order to help tie logging to supplies on the board and disambiguate when there is more than one regulator chip in the system. Factor this code out into a new rdev_get_name() function and use it throughout the regulator API so that we always use the same name. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 83 ++++++++++++++++++---------------------- 1 file changed, 38 insertions(+), 45 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index d3be67e18519..7d0c0d7d90ca 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -66,6 +66,16 @@ static unsigned int _regulator_get_mode(struct regulator_dev *rdev); static void _notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data); +static const char *rdev_get_name(struct regulator_dev *rdev) +{ + if (rdev->constraints && rdev->constraints->name) + return rdev->constraints->name; + else if (rdev->desc->name) + return rdev->desc->name; + else + return ""; +} + /* gets the regulator for a given consumer device */ static struct regulator *get_device_regulator(struct device *dev) { @@ -96,12 +106,12 @@ static int regulator_check_voltage(struct regulator_dev *rdev, if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } @@ -124,12 +134,12 @@ static int regulator_check_current_limit(struct regulator_dev *rdev, if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } @@ -159,17 +169,17 @@ static int regulator_check_mode(struct regulator_dev *rdev, int mode) if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } if (!(rdev->constraints->valid_modes_mask & mode)) { printk(KERN_ERR "%s: invalid mode %x for %s\n", - __func__, mode, rdev->desc->name); + __func__, mode, rdev_get_name(rdev)); return -EINVAL; } return 0; @@ -180,12 +190,12 @@ static int regulator_check_drms(struct regulator_dev *rdev) { if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } return 0; @@ -230,16 +240,8 @@ static ssize_t regulator_name_show(struct device *dev, struct device_attribute *attr, char *buf) { struct regulator_dev *rdev = dev_get_drvdata(dev); - const char *name; - if (rdev->constraints && rdev->constraints->name) - name = rdev->constraints->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = ""; - - return sprintf(buf, "%s\n", name); + return sprintf(buf, "%s\n", rdev_get_name(rdev)); } static ssize_t regulator_print_opmode(char *buf, int mode) @@ -687,13 +689,14 @@ static void print_constraints(struct regulator_dev *rdev) if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) count += sprintf(buf + count, "standby"); - printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf); + printk(KERN_INFO "regulator: %s: %s\n", rdev_get_name(rdev), buf); } static int machine_constraints_voltage(struct regulator_dev *rdev, - const char *name, struct regulation_constraints *constraints) + struct regulation_constraints *constraints) { struct regulator_ops *ops = rdev->desc->ops; + const char *name = rdev_get_name(rdev); int ret; /* do we need to apply the constraint voltage */ @@ -800,16 +803,11 @@ static int set_machine_constraints(struct regulator_dev *rdev, const char *name; struct regulator_ops *ops = rdev->desc->ops; - if (constraints->name) - name = constraints->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = "regulator"; - rdev->constraints = constraints; - ret = machine_constraints_voltage(rdev, name, constraints); + name = rdev_get_name(rdev); + + ret = machine_constraints_voltage(rdev, constraints); if (ret != 0) goto out; @@ -932,7 +930,7 @@ static int set_consumer_device_supply(struct regulator_dev *rdev, dev_name(&node->regulator->dev), node->regulator->desc->name, supply, - dev_name(&rdev->dev), rdev->desc->name); + dev_name(&rdev->dev), rdev_get_name(rdev)); return -EBUSY; } @@ -1241,7 +1239,7 @@ static int _regulator_enable(struct regulator_dev *rdev) ret = _regulator_enable(rdev->supply); if (ret < 0) { printk(KERN_ERR "%s: failed to enable %s: %d\n", - __func__, rdev->desc->name, ret); + __func__, rdev_get_name(rdev), ret); return ret; } } @@ -1267,7 +1265,7 @@ static int _regulator_enable(struct regulator_dev *rdev) } } else if (ret < 0) { printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n", - __func__, rdev->desc->name, ret); + __func__, rdev_get_name(rdev), ret); return ret; } /* Fallthrough on positive return values - already enabled */ @@ -1308,7 +1306,7 @@ static int _regulator_disable(struct regulator_dev *rdev) if (WARN(rdev->use_count <= 0, "unbalanced disables for %s\n", - rdev->desc->name)) + rdev_get_name(rdev))) return -EIO; /* are we the last user and permitted to disable ? */ @@ -1321,7 +1319,7 @@ static int _regulator_disable(struct regulator_dev *rdev) ret = rdev->desc->ops->disable(rdev); if (ret < 0) { printk(KERN_ERR "%s: failed to disable %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return ret; } } @@ -1378,7 +1376,7 @@ static int _regulator_force_disable(struct regulator_dev *rdev) ret = rdev->desc->ops->disable(rdev); if (ret < 0) { printk(KERN_ERR "%s: failed to force disable %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return ret; } /* notify other consumers that power has been forced off */ @@ -1795,7 +1793,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) output_uV = rdev->desc->ops->get_voltage(rdev); if (output_uV <= 0) { printk(KERN_ERR "%s: invalid output voltage found for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); goto out; } @@ -1806,7 +1804,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) input_uV = rdev->constraints->input_uV; if (input_uV <= 0) { printk(KERN_ERR "%s: invalid input voltage found for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); goto out; } @@ -1820,7 +1818,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) ret = regulator_check_mode(rdev, mode); if (ret < 0) { printk(KERN_ERR "%s: failed to get optimum mode for %s @" - " %d uA %d -> %d uV\n", __func__, rdev->desc->name, + " %d uA %d -> %d uV\n", __func__, rdev_get_name(rdev), total_uA_load, input_uV, output_uV); goto out; } @@ -1828,7 +1826,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) ret = rdev->desc->ops->set_mode(rdev, mode); if (ret < 0) { printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n", - __func__, mode, rdev->desc->name); + __func__, mode, rdev_get_name(rdev)); goto out; } ret = mode; @@ -2346,7 +2344,7 @@ int regulator_suspend_prepare(suspend_state_t state) if (ret < 0) { printk(KERN_ERR "%s: failed to prepare %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); goto out; } } @@ -2459,12 +2457,7 @@ static int __init regulator_init_complete(void) ops = rdev->desc->ops; c = rdev->constraints; - if (c && c->name) - name = c->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = "regulator"; + name = rdev_get_name(rdev); if (!ops->disable || (c && c->always_on)) continue; -- GitLab From 638f85c54f4fed0f8f1fbc23745a8f334112e892 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 22 Oct 2009 16:31:33 +0100 Subject: [PATCH 287/618] regulator: Handle regulators without suspend mode configuration Since some regulators in the system may not support suspend mode configuration we need to allow some regulators to have a missing suspend mode configuration. Do this by requiring that disabled regulators are explicitly flagged and then skip over regulators that have no state specified. Try to avoid surprises by warning the if we could set the state but no configuration is provided. This also ensures that an all zeros configuration generates a warning rather than silently disabling the regulator. Reported-by: Joonyoung Shim Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 25 ++++++++++++++++++++++--- include/linux/regulator/machine.h | 6 +++++- 2 files changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 7d0c0d7d90ca..2dab0d9e11f5 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -581,10 +581,29 @@ static int suspend_set_state(struct regulator_dev *rdev, struct regulator_state *rstate) { int ret = 0; + bool can_set_state; - /* enable & disable are mandatory for suspend control */ - if (!rdev->desc->ops->set_suspend_enable || - !rdev->desc->ops->set_suspend_disable) { + can_set_state = rdev->desc->ops->set_suspend_enable && + rdev->desc->ops->set_suspend_disable; + + /* If we have no suspend mode configration don't set anything; + * only warn if the driver actually makes the suspend mode + * configurable. + */ + if (!rstate->enabled && !rstate->disabled) { + if (can_set_state) + printk(KERN_WARNING "%s: No configuration for %s\n", + __func__, rdev_get_name(rdev)); + return 0; + } + + if (rstate->enabled && rstate->disabled) { + printk(KERN_ERR "%s: invalid configuration for %s\n", + __func__, rdev_get_name(rdev)); + return -EINVAL; + } + + if (!can_set_state) { printk(KERN_ERR "%s: no way to set suspend state\n", __func__); return -EINVAL; diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 87f5f176d4ef..234a8476cba8 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -43,16 +43,20 @@ struct regulator; /** * struct regulator_state - regulator state during low power system states * - * This describes a regulators state during a system wide low power state. + * This describes a regulators state during a system wide low power + * state. One of enabled or disabled must be set for the + * configuration to be applied. * * @uV: Operating voltage during suspend. * @mode: Operating mode during suspend. * @enabled: Enabled during suspend. + * @disabled: Disabled during suspend. */ struct regulator_state { int uV; /* suspend voltage */ unsigned int mode; /* suspend regulator operating mode */ int enabled; /* is regulator enabled in this suspend state */ + int disabled; /* is the regulator disbled in this suspend state */ }; /** -- GitLab From 9992ef40ff2e16559e49ff1ae63d133cb9849e8f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 22 Oct 2009 16:31:34 +0100 Subject: [PATCH 288/618] regulator: Remove duplicate consts from ab3100 'static const int const' means the same thing as 'static const int' and sparse complains about this. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/ab3100.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c index 49aeee823a25..5da127bbe1f2 100644 --- a/drivers/regulator/ab3100.c +++ b/drivers/regulator/ab3100.c @@ -81,7 +81,7 @@ static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = { #define LDO_C_VOLTAGE 2650000 #define LDO_D_VOLTAGE 2650000 -static const int const ldo_e_buck_typ_voltages[] = { +static const int ldo_e_buck_typ_voltages[] = { 1800000, 1400000, 1300000, @@ -91,7 +91,7 @@ static const int const ldo_e_buck_typ_voltages[] = { 900000, }; -static const int const ldo_f_typ_voltages[] = { +static const int ldo_f_typ_voltages[] = { 1800000, 1400000, 1300000, @@ -102,21 +102,21 @@ static const int const ldo_f_typ_voltages[] = { 2650000, }; -static const int const ldo_g_typ_voltages[] = { +static const int ldo_g_typ_voltages[] = { 2850000, 2750000, 1800000, 1500000, }; -static const int const ldo_h_typ_voltages[] = { +static const int ldo_h_typ_voltages[] = { 2750000, 1800000, 1500000, 1200000, }; -static const int const ldo_k_typ_voltages[] = { +static const int ldo_k_typ_voltages[] = { 2750000, 1800000, }; -- GitLab From ddec68107ab101d9ff934811d5598f5c613027f2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 22 Oct 2009 16:31:35 +0100 Subject: [PATCH 289/618] regulator: Ensure val is initialised in 88pm8607 choose_voltage() If we fall through it means that we hit an unknown regulator/chip combination so set -ENOENT as an explicit flag (the return code is only used internally). Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/88pm8607.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c index e1aabdaabf23..04719551381b 100644 --- a/drivers/regulator/88pm8607.c +++ b/drivers/regulator/88pm8607.c @@ -170,7 +170,8 @@ static int choose_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); uint8_t chip_id = info->chip->chip_id; - int val, ret; + int val = -ENOENT; + int ret; switch (info->desc.id) { case PM8607_ID_BUCK1: -- GitLab From 495353a3f7fbb11e5100c9258365ff65a4834b37 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 26 Oct 2009 12:37:11 +0100 Subject: [PATCH 290/618] regulator: keep index within bounds in da9034_get_ldo12_voltage() If selector equals ARRAY_SIZE(da9034_ldo12_data), that is one too large already. Signed-off-by: Roel Kluin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/da903x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index aa224d936e0d..f8c4661a7a81 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -331,7 +331,7 @@ static int da9034_get_ldo12_voltage(struct regulator_dev *rdev) static int da9034_list_ldo12_voltage(struct regulator_dev *rdev, unsigned selector) { - if (selector > ARRAY_SIZE(da9034_ldo12_data)) + if (selector >= ARRAY_SIZE(da9034_ldo12_data)) return -EINVAL; return da9034_ldo12_data[selector] * 1000; } -- GitLab From 176f45b9c9b7e451ac46becb92110f5e2de02d8c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 28 Oct 2009 17:30:15 +0100 Subject: [PATCH 291/618] Fix some AB3100 regulator issues This patch will remove surplus register writes on shut down of LDO D (this magic was not needed), remove an unnecessary (!) error check and really unregister the regulators when the module is unloaded. Signed-off-by: Linus Walleij Signed-off-by: Liam Girdwood --- drivers/regulator/ab3100.c | 23 ++--------------------- 1 file changed, 2 insertions(+), 21 deletions(-) diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c index 5da127bbe1f2..b349db4504b7 100644 --- a/drivers/regulator/ab3100.c +++ b/drivers/regulator/ab3100.c @@ -241,24 +241,12 @@ static int ab3100_disable_regulator(struct regulator_dev *reg) * LDO D is a special regulator. When it is disabled, the entire * system is shut down. So this is handled specially. */ + pr_info("Called ab3100_disable_regulator\n"); if (abreg->regreg == AB3100_LDO_D) { - int i; - dev_info(®->dev, "disabling LDO D - shut down system\n"); - /* - * Set regulators to default values, ignore any errors, - * we're going DOWN - */ - for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) { - (void) ab3100_set_register_interruptible(abreg->ab3100, - ab3100_reg_init_order[i], - abreg->plfdata->reg_initvals[i]); - } - /* Setting LDO D to 0x00 cuts the power to the SoC */ return ab3100_set_register_interruptible(abreg->ab3100, AB3100_LDO_D, 0x00U); - } /* @@ -607,13 +595,6 @@ static int __init ab3100_regulators_probe(struct platform_device *pdev) } } - if (err) { - dev_err(&pdev->dev, - "LDO D regulator initialization failed with error %d\n", - err); - return err; - } - /* Register the regulators */ for (i = 0; i < AB3100_NUM_REGULATORS; i++) { struct ab3100_regulator *reg = &ab3100_regulators[i]; @@ -688,7 +669,7 @@ static __init int ab3100_regulators_init(void) static __exit void ab3100_regulators_exit(void) { - platform_driver_register(&ab3100_regulators_driver); + platform_driver_unregister(&ab3100_regulators_driver); } subsys_initcall(ab3100_regulators_init); -- GitLab From b4b90c659d88d09dcb4e34dce5123458cb1b5071 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 10 Nov 2009 09:18:06 +0100 Subject: [PATCH 292/618] regulator/mc13783: rename source file to match other drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit One annoying thing about the old name was that the module was just called mc13783 which caused wrong expectations (at least for me). Signed-off-by: Uwe Kleine-König Cc: Sascha Hauer Cc: Liam Girdwood Cc: Mark Brown Cc: Samuel Ortiz Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/Makefile | 2 +- drivers/regulator/{mc13783.c => mc13783-regulator.c} | 0 2 files changed, 1 insertion(+), 1 deletion(-) rename drivers/regulator/{mc13783.c => mc13783-regulator.c} (100%) diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 499ed079811f..b3c806c79415 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -21,7 +21,7 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o -obj-$(CONFIG_REGULATOR_MC13783) += mc13783.o +obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o diff --git a/drivers/regulator/mc13783.c b/drivers/regulator/mc13783-regulator.c similarity index 100% rename from drivers/regulator/mc13783.c rename to drivers/regulator/mc13783-regulator.c -- GitLab From a10099bc8884397f54c9b73831b0529850fe23d3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 10 Nov 2009 09:18:07 +0100 Subject: [PATCH 293/618] regulator/mc13783: various cleanups MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - define needed registers and bits in the driver - properly namespace functions and structs - fix locking as required by patch "mfd/mc13783: near complete rewrite" - use platform_data as provided by "mfd/mc13783: near complete rewrite" instead of accessing struct mc13783 - struct mc13783_regulator_priv.desc is (and was) unused and so can go away - use cpp magic to initialize mc13783_regulators - bring MODULE_LICENSE in sync with actual copyright - minor style fixes This allows not including mc13783-private.h which I intend to remove soon. Signed-off-by: Uwe Kleine-König Cc: Sascha Hauer Cc: Liam Girdwood Cc: Mark Brown Cc: Samuel Ortiz Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/mc13783-regulator.c | 389 ++++++++------------------ 1 file changed, 112 insertions(+), 277 deletions(-) diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c index 710211f67449..9f99862ec3a6 100644 --- a/drivers/regulator/mc13783-regulator.c +++ b/drivers/regulator/mc13783-regulator.c @@ -8,15 +8,47 @@ * published by the Free Software Foundation. */ -#include +#include #include #include #include -#include #include #include #include +#define MC13783_REG_SWITCHERS4 28 +#define MC13783_REG_SWITCHERS4_PLLEN (1 << 18) + +#define MC13783_REG_SWITCHERS5 29 +#define MC13783_REG_SWITCHERS5_SW3EN (1 << 20) + +#define MC13783_REG_REGULATORMODE0 32 +#define MC13783_REG_REGULATORMODE0_VAUDIOEN (1 << 0) +#define MC13783_REG_REGULATORMODE0_VIOHIEN (1 << 3) +#define MC13783_REG_REGULATORMODE0_VIOLOEN (1 << 6) +#define MC13783_REG_REGULATORMODE0_VDIGEN (1 << 9) +#define MC13783_REG_REGULATORMODE0_VGENEN (1 << 12) +#define MC13783_REG_REGULATORMODE0_VRFDIGEN (1 << 15) +#define MC13783_REG_REGULATORMODE0_VRFREFEN (1 << 18) +#define MC13783_REG_REGULATORMODE0_VRFCPEN (1 << 21) + +#define MC13783_REG_REGULATORMODE1 33 +#define MC13783_REG_REGULATORMODE1_VSIMEN (1 << 0) +#define MC13783_REG_REGULATORMODE1_VESIMEN (1 << 3) +#define MC13783_REG_REGULATORMODE1_VCAMEN (1 << 6) +#define MC13783_REG_REGULATORMODE1_VRFBGEN (1 << 9) +#define MC13783_REG_REGULATORMODE1_VVIBEN (1 << 11) +#define MC13783_REG_REGULATORMODE1_VRF1EN (1 << 12) +#define MC13783_REG_REGULATORMODE1_VRF2EN (1 << 15) +#define MC13783_REG_REGULATORMODE1_VMMC1EN (1 << 18) +#define MC13783_REG_REGULATORMODE1_VMMC2EN (1 << 21) + +#define MC13783_REG_POWERMISC 34 +#define MC13783_REG_POWERMISC_GPO1EN (1 << 6) +#define MC13783_REG_POWERMISC_GPO2EN (1 << 8) +#define MC13783_REG_POWERMISC_GPO3EN (1 << 10) +#define MC13783_REG_POWERMISC_GPO4EN (1 << 12) + struct mc13783_regulator { struct regulator_desc desc; int reg; @@ -25,298 +57,97 @@ struct mc13783_regulator { static struct regulator_ops mc13783_regulator_ops; +#define MC13783_DEFINE(prefix, _name, _reg) \ + [MC13783_ ## prefix ## _ ## _name] = { \ + .desc = { \ + .name = #prefix "_" #_name, \ + .ops = &mc13783_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MC13783_ ## prefix ## _ ## _name, \ + .owner = THIS_MODULE, \ + }, \ + .reg = MC13783_REG_ ## _reg, \ + .enable_bit = MC13783_REG_ ## _reg ## _ ## _name ## EN, \ + } + +#define MC13783_DEFINE_SW(_name, _reg) MC13783_DEFINE(SW, _name, _reg) +#define MC13783_DEFINE_REGU(_name, _reg) MC13783_DEFINE(REGU, _name, _reg) + static struct mc13783_regulator mc13783_regulators[] = { - [MC13783_SW_SW3] = { - .desc = { - .name = "SW_SW3", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_SW_SW3, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_SWITCHERS_5, - .enable_bit = MC13783_SWCTRL_SW3_EN, - }, - [MC13783_SW_PLL] = { - .desc = { - .name = "SW_PLL", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_SW_PLL, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_SWITCHERS_4, - .enable_bit = MC13783_SWCTRL_PLL_EN, - }, - [MC13783_REGU_VAUDIO] = { - .desc = { - .name = "REGU_VAUDIO", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VAUDIO, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VAUDIO_EN, - }, - [MC13783_REGU_VIOHI] = { - .desc = { - .name = "REGU_VIOHI", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VIOHI, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VIOHI_EN, - }, - [MC13783_REGU_VIOLO] = { - .desc = { - .name = "REGU_VIOLO", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VIOLO, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VIOLO_EN, - }, - [MC13783_REGU_VDIG] = { - .desc = { - .name = "REGU_VDIG", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VDIG, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VDIG_EN, - }, - [MC13783_REGU_VGEN] = { - .desc = { - .name = "REGU_VGEN", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VGEN, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VGEN_EN, - }, - [MC13783_REGU_VRFDIG] = { - .desc = { - .name = "REGU_VRFDIG", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFDIG, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VRFDIG_EN, - }, - [MC13783_REGU_VRFREF] = { - .desc = { - .name = "REGU_VRFREF", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFREF, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VRFREF_EN, - }, - [MC13783_REGU_VRFCP] = { - .desc = { - .name = "REGU_VRFCP", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFCP, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VRFCP_EN, - }, - [MC13783_REGU_VSIM] = { - .desc = { - .name = "REGU_VSIM", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VSIM, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VSIM_EN, - }, - [MC13783_REGU_VESIM] = { - .desc = { - .name = "REGU_VESIM", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VESIM, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VESIM_EN, - }, - [MC13783_REGU_VCAM] = { - .desc = { - .name = "REGU_VCAM", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VCAM, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VCAM_EN, - }, - [MC13783_REGU_VRFBG] = { - .desc = { - .name = "REGU_VRFBG", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFBG, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VRFBG_EN, - }, - [MC13783_REGU_VVIB] = { - .desc = { - .name = "REGU_VVIB", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VVIB, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VVIB_EN, - }, - [MC13783_REGU_VRF1] = { - .desc = { - .name = "REGU_VRF1", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRF1, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VRF1_EN, - }, - [MC13783_REGU_VRF2] = { - .desc = { - .name = "REGU_VRF2", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRF2, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VRF2_EN, - }, - [MC13783_REGU_VMMC1] = { - .desc = { - .name = "REGU_VMMC1", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VMMC1, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VMMC1_EN, - }, - [MC13783_REGU_VMMC2] = { - .desc = { - .name = "REGU_VMMC2", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VMMC2, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VMMC2_EN, - }, - [MC13783_REGU_GPO1] = { - .desc = { - .name = "REGU_GPO1", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO1, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO1_EN, - }, - [MC13783_REGU_GPO2] = { - .desc = { - .name = "REGU_GPO2", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO2, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO2_EN, - }, - [MC13783_REGU_GPO3] = { - .desc = { - .name = "REGU_GPO3", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO3, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO3_EN, - }, - [MC13783_REGU_GPO4] = { - .desc = { - .name = "REGU_GPO4", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO4, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO4_EN, - }, + MC13783_DEFINE_SW(SW3, SWITCHERS5), + MC13783_DEFINE_SW(PLL, SWITCHERS4), + + MC13783_DEFINE_REGU(VAUDIO, REGULATORMODE0), + MC13783_DEFINE_REGU(VIOHI, REGULATORMODE0), + MC13783_DEFINE_REGU(VIOLO, REGULATORMODE0), + MC13783_DEFINE_REGU(VDIG, REGULATORMODE0), + MC13783_DEFINE_REGU(VGEN, REGULATORMODE0), + MC13783_DEFINE_REGU(VRFDIG, REGULATORMODE0), + MC13783_DEFINE_REGU(VRFREF, REGULATORMODE0), + MC13783_DEFINE_REGU(VRFCP, REGULATORMODE0), + MC13783_DEFINE_REGU(VSIM, REGULATORMODE1), + MC13783_DEFINE_REGU(VESIM, REGULATORMODE1), + MC13783_DEFINE_REGU(VCAM, REGULATORMODE1), + MC13783_DEFINE_REGU(VRFBG, REGULATORMODE1), + MC13783_DEFINE_REGU(VVIB, REGULATORMODE1), + MC13783_DEFINE_REGU(VRF1, REGULATORMODE1), + MC13783_DEFINE_REGU(VRF2, REGULATORMODE1), + MC13783_DEFINE_REGU(VMMC1, REGULATORMODE1), + MC13783_DEFINE_REGU(VMMC2, REGULATORMODE1), + MC13783_DEFINE_REGU(GPO1, POWERMISC), + MC13783_DEFINE_REGU(GPO2, POWERMISC), + MC13783_DEFINE_REGU(GPO3, POWERMISC), + MC13783_DEFINE_REGU(GPO4, POWERMISC), }; -struct mc13783_priv { - struct regulator_desc desc[ARRAY_SIZE(mc13783_regulators)]; +struct mc13783_regulator_priv { struct mc13783 *mc13783; - struct regulator_dev *regulators[0]; + struct regulator_dev *regulators[]; }; -static int mc13783_enable(struct regulator_dev *rdev) +static int mc13783_regulator_enable(struct regulator_dev *rdev) { - struct mc13783_priv *priv = rdev_get_drvdata(rdev); + struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev); int id = rdev_get_id(rdev); + int ret; dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); - return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg, + mc13783_lock(priv->mc13783); + ret = mc13783_reg_rmw(priv->mc13783, mc13783_regulators[id].reg, mc13783_regulators[id].enable_bit, mc13783_regulators[id].enable_bit); + mc13783_unlock(priv->mc13783); + + return ret; } -static int mc13783_disable(struct regulator_dev *rdev) +static int mc13783_regulator_disable(struct regulator_dev *rdev) { - struct mc13783_priv *priv = rdev_get_drvdata(rdev); + struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev); int id = rdev_get_id(rdev); + int ret; dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); - return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg, + mc13783_lock(priv->mc13783); + ret = mc13783_reg_rmw(priv->mc13783, mc13783_regulators[id].reg, mc13783_regulators[id].enable_bit, 0); + mc13783_unlock(priv->mc13783); + + return ret; } -static int mc13783_is_enabled(struct regulator_dev *rdev) +static int mc13783_regulator_is_enabled(struct regulator_dev *rdev) { - struct mc13783_priv *priv = rdev_get_drvdata(rdev); + struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev); int ret, id = rdev_get_id(rdev); unsigned int val; + mc13783_lock(priv->mc13783); ret = mc13783_reg_read(priv->mc13783, mc13783_regulators[id].reg, &val); + mc13783_unlock(priv->mc13783); + if (ret) return ret; @@ -324,29 +155,32 @@ static int mc13783_is_enabled(struct regulator_dev *rdev) } static struct regulator_ops mc13783_regulator_ops = { - .enable = mc13783_enable, - .disable = mc13783_disable, - .is_enabled = mc13783_is_enabled, + .enable = mc13783_regulator_enable, + .disable = mc13783_regulator_disable, + .is_enabled = mc13783_regulator_is_enabled, }; static int __devinit mc13783_regulator_probe(struct platform_device *pdev) { - struct mc13783_priv *priv; + struct mc13783_regulator_priv *priv; struct mc13783 *mc13783 = dev_get_drvdata(pdev->dev.parent); + struct mc13783_regulator_platform_data *pdata = + dev_get_platdata(&pdev->dev); struct mc13783_regulator_init_data *init_data; int i, ret; dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id); - priv = kzalloc(sizeof(*priv) + mc13783->num_regulators * sizeof(void *), + priv = kzalloc(sizeof(*priv) + + pdata->num_regulators * sizeof(priv->regulators[0]), GFP_KERNEL); if (!priv) return -ENOMEM; priv->mc13783 = mc13783; - for (i = 0; i < mc13783->num_regulators; i++) { - init_data = &mc13783->regulators[i]; + for (i = 0; i < pdata->num_regulators; i++) { + init_data = &pdata->regulators[i]; priv->regulators[i] = regulator_register( &mc13783_regulators[init_data->id].desc, &pdev->dev, init_data->init_data, priv); @@ -373,11 +207,12 @@ static int __devinit mc13783_regulator_probe(struct platform_device *pdev) static int __devexit mc13783_regulator_remove(struct platform_device *pdev) { - struct mc13783_priv *priv = platform_get_drvdata(pdev); - struct mc13783 *mc13783 = priv->mc13783; + struct mc13783_regulator_priv *priv = platform_get_drvdata(pdev); + struct mc13783_regulator_platform_data *pdata = + dev_get_platdata(&pdev->dev); int i; - for (i = 0; i < mc13783->num_regulators; i++) + for (i = 0; i < pdata->num_regulators; i++) regulator_unregister(priv->regulators[i]); return 0; @@ -404,7 +239,7 @@ static void __exit mc13783_regulator_exit(void) } module_exit(mc13783_regulator_exit); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Sascha Hauer Date: Wed, 11 Nov 2009 14:16:10 +0000 Subject: [PATCH 294/618] regulator: consumer.h - fix build when consumer.h is #included first. consumer.h requires device.h for stand alone build. Signed-off-by: Liam Girdwood --- include/linux/regulator/consumer.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 490c5b37b6d7..030d92255c7a 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -35,6 +35,8 @@ #ifndef __LINUX_REGULATOR_CONSUMER_H_ #define __LINUX_REGULATOR_CONSUMER_H_ +#include + /* * Regulator operating modes. * -- GitLab From d662fc82dc745ee24d518b0fde5a6a19758092ec Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 21 Nov 2009 22:18:44 +0100 Subject: [PATCH 295/618] drivers/regulator: use PTR_ERR to get error code IS_ERR returns only 1 or 0. The callsite of setup_regulators expects a negative integer in an error case. Thus, PTR_ERR has to be used to extract it. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression E,E1; @@ *E = IS_ERR(...) ... when != E = E1 *return E; // Signed-off-by: Julia Lawall Acked-by: Signed-off-by: Liam Girdwood --- drivers/regulator/lp3971.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c index 7803a320543b..76d08c282f9c 100644 --- a/drivers/regulator/lp3971.c +++ b/drivers/regulator/lp3971.c @@ -446,8 +446,8 @@ static int setup_regulators(struct lp3971 *lp3971, lp3971->rdev[i] = regulator_register(®ulators[id], lp3971->dev, pdata->regulators[i].initdata, lp3971); - err = IS_ERR(lp3971->rdev[i]); - if (err) { + if (IS_ERR(lp3971->rdev[i])) { + err = PTR_ERR(lp3971->rdev[i]); dev_err(lp3971->dev, "regulator init failed: %d\n", err); goto error; -- GitLab From fa2984d4691c96367d6666694ecc6744135174c6 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 27 Nov 2009 15:56:34 +0100 Subject: [PATCH 296/618] regulator: core.c: Small coding style cleanup (indentation fixup) Signed-off-by: Stefan Roese Cc: Liam Girdwood Cc: Mark Brown Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 2dab0d9e11f5..1af8df203b72 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -390,7 +390,7 @@ static ssize_t regulator_total_uA_show(struct device *dev, mutex_lock(&rdev->mutex); list_for_each_entry(regulator, &rdev->consumer_list, list) - uA += regulator->uA_load; + uA += regulator->uA_load; mutex_unlock(&rdev->mutex); return sprintf(buf, "%d\n", uA); } @@ -565,7 +565,7 @@ static void drms_uA_update(struct regulator_dev *rdev) /* calc total requested load */ list_for_each_entry(sibling, &rdev->consumer_list, list) - current_uA += sibling->uA_load; + current_uA += sibling->uA_load; /* now get the optimum mode for our new total regulator load */ mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, @@ -1829,7 +1829,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) /* calc total requested load for this regulator */ list_for_each_entry(consumer, &rdev->consumer_list, list) - total_uA_load += consumer->uA_load; + total_uA_load += consumer->uA_load; mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, output_uV, @@ -1898,9 +1898,9 @@ static void _notifier_call_chain(struct regulator_dev *rdev, /* now notify regulator we supply */ list_for_each_entry(_rdev, &rdev->supply_list, slist) { - mutex_lock(&_rdev->mutex); - _notifier_call_chain(_rdev, event, data); - mutex_unlock(&_rdev->mutex); + mutex_lock(&_rdev->mutex); + _notifier_call_chain(_rdev, event, data); + mutex_unlock(&_rdev->mutex); } } -- GitLab From eb143ac1b9f56ca9c6dc782d795acda1f60c5fd2 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 15 Dec 2009 14:30:01 +0100 Subject: [PATCH 297/618] regulator: Fix unbalanced disables/enables in regulator_bulk_{enable,disable} error path Currently it is possible for regulator_bulk_{enable,disable} operations to generate unbalanced regulator_{disable,enable} calls in its error path. In case of an error only those regulators of the bulk operation which actually had been enabled/disabled should get their original state restored. Signed-off-by: Lars-Peter Clausen Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 1af8df203b72..686ef270ecf7 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1977,7 +1977,7 @@ int regulator_bulk_enable(int num_consumers, err: printk(KERN_ERR "Failed to enable %s: %d\n", consumers[i].supply, ret); - for (i = 0; i < num_consumers; i++) + for (--i; i >= 0; --i) regulator_disable(consumers[i].consumer); return ret; @@ -2013,7 +2013,7 @@ int regulator_bulk_disable(int num_consumers, err: printk(KERN_ERR "Failed to disable %s: %d\n", consumers[i].supply, ret); - for (i = 0; i < num_consumers; i++) + for (--i; i >= 0; --i) regulator_enable(consumers[i].consumer); return ret; -- GitLab From 735eb93ae267f0b5638045b86dbc1e0b7019e3e8 Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Mon, 14 Dec 2009 18:53:35 +0100 Subject: [PATCH 298/618] regulator: mc13783-regulator: correct the probing time. When the mc13783-regulator driver is built in kernel, probing it during the regulator subsystem initialisation result in a fault. That is because regulator subsystem is planned to be initialised very early in the boot process, before the mfd subsystem initialisation. The mc12783-regulator probing process need to access to the mc13783-core functionality to read/write mc13783 registers and so must be called after the mc13783-core driver initialisation. The way to do this is to let the kernel probe the mc13783-regulator driver when mc13783-core register his regulator subdevice. Signed-off-by: Alberto Panizzo Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/mc13783-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c index 9f99862ec3a6..39c495300045 100644 --- a/drivers/regulator/mc13783-regulator.c +++ b/drivers/regulator/mc13783-regulator.c @@ -224,12 +224,12 @@ static struct platform_driver mc13783_regulator_driver = { .owner = THIS_MODULE, }, .remove = __devexit_p(mc13783_regulator_remove), + .probe = mc13783_regulator_probe, }; static int __init mc13783_regulator_init(void) { - return platform_driver_probe(&mc13783_regulator_driver, - mc13783_regulator_probe); + return platform_driver_register(&mc13783_regulator_driver); } subsys_initcall(mc13783_regulator_init); -- GitLab From 07fc493f03019b5a98de1a498ab1b235afc394db Mon Sep 17 00:00:00 2001 From: Juha Keski-Saari Date: Wed, 16 Dec 2009 15:27:55 +0200 Subject: [PATCH 299/618] twl-regulator: Add all twl4030 regulators to twlreg_info Define all twl4030 regulators in the twlreg_info table, along with appropriate VSEL tables for adjustable regulators Signed-off-by: Juha Keski-Saari Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 7ea1c3a31081..43d7494fbd8e 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -294,6 +294,18 @@ static const u16 VSIM_VSEL_table[] = { static const u16 VDAC_VSEL_table[] = { 1200, 1300, 1800, 1800, }; +static const u16 VDD1_VSEL_table[] = { + 800, 1450, +}; +static const u16 VDD2_VSEL_table[] = { + 800, 1450, 1500, +}; +static const u16 VIO_VSEL_table[] = { + 1800, 1850, +}; +static const u16 VINTANA2_VSEL_table[] = { + 2500, 2750, +}; static const u16 VAUX1_6030_VSEL_table[] = { 1000, 1300, 1800, 2500, 2800, 2900, 3000, 3000, @@ -464,20 +476,16 @@ static struct twlreg_info twl_regs[] = { TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4), TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5), TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6), - /* TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7), - */ TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8), TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9), TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10), - /* - TWL4030_ADJUSTABLE_LDO(VINTANA1, 0x3f, 11), + TWL4030_FIXED_LDO(VINTANA1, 0x3f, 11), TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12), - TWL4030_ADJUSTABLE_LDO(VINTDIG, 0x47, 13), - TWL4030_SMPS(VIO, 0x4b, 14), - TWL4030_SMPS(VDD1, 0x55, 15), - TWL4030_SMPS(VDD2, 0x63, 16), - */ + TWL4030_FIXED_LDO(VINTDIG, 0x47, 13), + TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14), + TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15), + TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16), TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17), TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18), TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19), -- GitLab From 205e5cd3d933a9ea7b75630355c8f8ec5ef16f6c Mon Sep 17 00:00:00 2001 From: Juha Keski-Saari Date: Wed, 16 Dec 2009 15:27:56 +0200 Subject: [PATCH 300/618] twl-regulator: Define critical regulators as always_on Defines VIO, VDD1, VDD2, VPLL1 and VINT* regulators as always_on by default since they are critical to TWL and its master's functionality and should be on in all cases where RegFW is used Signed-off-by: Juha Keski-Saari Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 43d7494fbd8e..aadf4cfe354e 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -533,6 +533,19 @@ static int twlreg_probe(struct platform_device *pdev) c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS; + switch (pdev->id) { + case TWL4030_REG_VIO: + case TWL4030_REG_VDD1: + case TWL4030_REG_VDD2: + case TWL4030_REG_VPLL1: + case TWL4030_REG_VINTANA1: + case TWL4030_REG_VINTANA2: + case TWL4030_REG_VINTDIG: + c->always_on = true; + break; + default: + break; + } rdev = regulator_register(&info->desc, &pdev->dev, initdata, info); if (IS_ERR(rdev)) { -- GitLab From 045f972f2c254070652a59958591cac650e8684e Mon Sep 17 00:00:00 2001 From: Juha Keski-Saari Date: Wed, 16 Dec 2009 14:49:52 +0200 Subject: [PATCH 301/618] twl-regulator: Add turnon-delay and REMAP config to twlreg_info struct This change includes regulator turnon delay values and the REMAP reset configuration to the twlreg_info struct, since they are basic attributes of every TWL regulator Signed-off-by: Juha Keski-Saari Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 103 ++++++++++++++++++------------ 1 file changed, 62 insertions(+), 41 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index aadf4cfe354e..3df02267e1e7 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -40,6 +40,12 @@ struct twlreg_info { u8 table_len; const u16 *table; + /* regulator specific turn-on delay */ + u16 delay; + + /* State REMAP default configuration */ + u8 remap; + /* chip constraints on regulator behavior */ u16 min_mV; @@ -426,20 +432,30 @@ static struct regulator_ops twlfixed_ops = { /*----------------------------------------------------------------------*/ -#define TWL4030_ADJUSTABLE_LDO(label, offset, num) \ - TWL_ADJUSTABLE_LDO(label, offset, num, TWL4030) -#define TWL4030_FIXED_LDO(label, offset, mVolts, num) \ - TWL_FIXED_LDO(label, offset, mVolts, num, TWL4030) -#define TWL6030_ADJUSTABLE_LDO(label, offset, num) \ - TWL_ADJUSTABLE_LDO(label, offset, num, TWL6030) -#define TWL6030_FIXED_LDO(label, offset, mVolts, num) \ - TWL_FIXED_LDO(label, offset, mVolts, num, TWL6030) - -#define TWL_ADJUSTABLE_LDO(label, offset, num, family) { \ +#define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \ + TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \ + remap_conf, TWL4030) +#define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf) \ + TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf, TWL4030) +#define TWL6030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \ + remap_conf) \ + TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \ + remap_conf, TWL6030) +#define TWL6030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf) \ + TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf, TWL6030) + +#define TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf, \ + family) { \ .base = offset, \ .id = num, \ .table_len = ARRAY_SIZE(label##_VSEL_table), \ .table = label##_VSEL_table, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ .desc = { \ .name = #label, \ .id = family##_REG_##label, \ @@ -450,10 +466,13 @@ static struct regulator_ops twlfixed_ops = { }, \ } -#define TWL_FIXED_LDO(label, offset, mVolts, num, family) { \ +#define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \ + family) { \ .base = offset, \ .id = num, \ .min_mV = mVolts, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ .desc = { \ .name = #label, \ .id = family##_REG_##label, \ @@ -469,39 +488,41 @@ static struct regulator_ops twlfixed_ops = { * software control over them after boot. */ static struct twlreg_info twl_regs[] = { - TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1), - TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2), - TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2), - TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3), - TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4), - TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5), - TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6), - TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7), - TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8), - TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9), - TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10), - TWL4030_FIXED_LDO(VINTANA1, 0x3f, 11), - TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12), - TWL4030_FIXED_LDO(VINTDIG, 0x47, 13), - TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14), - TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15), - TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16), - TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17), - TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18), - TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19), + TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7, 100, 0x00), + TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00), + TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08), + TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08), + TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08), + TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15, 1000, 0x08), + TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16, 1000, 0x08), + TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08), + TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08), + TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08), /* VUSBCP is managed *only* by the USB subchip */ /* 6030 REG with base as PMC Slave Misc : 0x0030 */ - TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1), - TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2), - TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3), - TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4), - TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5), - TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7), - TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15), - TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16), - TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17), - TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18) + /* Turnon-delay and remap configuration values for 6030 are not + verified since the specification is not public */ + TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7, 0, 0x08), + TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0, 0x08), + TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0, 0x08), + TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0, 0x08), + TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0, 0x08) }; static int twlreg_probe(struct platform_device *pdev) -- GitLab From 30010fa52c7bd466b441e3f9020ba4cf6154fa41 Mon Sep 17 00:00:00 2001 From: Juha Keski-Saari Date: Wed, 16 Dec 2009 15:27:58 +0200 Subject: [PATCH 302/618] twl-regulator: Restore REMAP configuration in regulator probe This change ensures the regulator REMAP register configuration is in a known state so state transitions will function as intended regardless of possible bootloader effects on it Signed-off-by: Juha Keski-Saari Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 3df02267e1e7..6c464b86b29c 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -576,6 +576,9 @@ static int twlreg_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, rdev); + twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP, + info->remap); + /* NOTE: many regulators support short-circuit IRQs (presentable * as REGULATOR_OVER_CURRENT notifications?) configured via: * - SC_CONFIG -- GitLab From 53b8a9d92a713fa82316bf418dcc19d6da32ca05 Mon Sep 17 00:00:00 2001 From: Juha Keski-Saari Date: Wed, 16 Dec 2009 14:55:26 +0200 Subject: [PATCH 303/618] twl-regulator: Add turnon delay to reg_enable This change implements a basic turnon delay in the regulator enable function to make it less probable that reg_enable returns before the regulator output is at target level Signed-off-by: Juha Keski-Saari Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 6c464b86b29c..9bcea4d131be 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -134,6 +135,7 @@ static int twlreg_enable(struct regulator_dev *rdev) { struct twlreg_info *info = rdev_get_drvdata(rdev); int grp; + int ret; grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); if (grp < 0) @@ -144,7 +146,11 @@ static int twlreg_enable(struct regulator_dev *rdev) else grp |= P1_GRP_6030; - return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); + + udelay(info->delay); + + return ret; } static int twlreg_disable(struct regulator_dev *rdev) -- GitLab From cf9836f4ddd1a08e88fe05e06f21313c609d3d55 Mon Sep 17 00:00:00 2001 From: Juha Keski-Saari Date: Wed, 16 Dec 2009 15:28:00 +0200 Subject: [PATCH 304/618] twl-regulator: Fix reg_disable functionality for 4030 and 6030 This change makes sure all regulator group assignments are cleared on disable call Signed-off-by: Juha Keski-Saari Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 9bcea4d131be..7e674859bd59 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -163,9 +163,9 @@ static int twlreg_disable(struct regulator_dev *rdev) return grp; if (twl_class_is_4030()) - grp &= ~P1_GRP_4030; + grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030); else - grp &= ~P1_GRP_6030; + grp &= ~(P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030); return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); } -- GitLab From 6f17c65240e35ae99319c659c74d54100a832f45 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 15 Dec 2009 20:07:31 +0100 Subject: [PATCH 305/618] regulator: wm831x_reg_read() failure unnoticed in wm831x_aldo_get_mode() ret should be signed to notice a failure in wm831x_reg_read(). Signed-off-by: Roel Kluin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/wm831x-ldo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index 902db56ce099..61e02ac2fda3 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -470,7 +470,7 @@ static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev) struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); struct wm831x *wm831x = ldo->wm831x; int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; - unsigned int ret; + int ret; ret = wm831x_reg_read(wm831x, on_reg); if (ret < 0) -- GitLab From 11ab3f3d3c2474d3ed6912443de74c3972bd6f23 Mon Sep 17 00:00:00 2001 From: Chen Liqin Date: Wed, 18 Nov 2009 13:22:33 +0800 Subject: [PATCH 306/618] score: add flush_dcahce_page and PG_dcache_dirty define Signed-off-by: Cui Bixiong Signed-off-by: Chen Liqin modified: arch/score/include/asm/cacheflush.h modified: arch/score/mm/cache.c --- arch/score/include/asm/cacheflush.h | 4 +++- arch/score/mm/cache.c | 26 ++++++++++++++++++++++++-- 2 files changed, 27 insertions(+), 3 deletions(-) diff --git a/arch/score/include/asm/cacheflush.h b/arch/score/include/asm/cacheflush.h index caaba24036e3..1d545d0ce206 100644 --- a/arch/score/include/asm/cacheflush.h +++ b/arch/score/include/asm/cacheflush.h @@ -14,10 +14,12 @@ extern void flush_cache_sigtramp(unsigned long addr); extern void flush_icache_all(void); extern void flush_icache_range(unsigned long start, unsigned long end); extern void flush_dcache_range(unsigned long start, unsigned long end); +extern void flush_dcache_page(struct page *page); + +#define PG_dcache_dirty PG_arch_1 #define flush_cache_dup_mm(mm) do {} while (0) #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do {} while (0) #define flush_dcache_mmap_lock(mapping) do {} while (0) #define flush_dcache_mmap_unlock(mapping) do {} while (0) #define flush_cache_vmap(start, end) do {} while (0) diff --git a/arch/score/mm/cache.c b/arch/score/mm/cache.c index dbac9d9dfddd..b25e95743600 100644 --- a/arch/score/mm/cache.c +++ b/arch/score/mm/cache.c @@ -29,6 +29,7 @@ #include #include #include +#include #include @@ -51,6 +52,27 @@ static void flush_data_cache_page(unsigned long addr) } } +void flush_dcache_page(struct page *page) +{ + struct address_space *mapping = page_mapping(page); + unsigned long addr; + + if (PageHighMem(page)) + return; + if (mapping && !mapping_mapped(mapping)) { + set_bit(PG_dcache_dirty, &(page)->flags); + return; + } + + /* + * We could delay the flush for the !page_mapping case too. But that + * case is for exec env/arg pages and those are %99 certainly going to + * get faulted into the tlb (and thus flushed) anyways. + */ + addr = (unsigned long) page_address(page); + flush_data_cache_page(addr); +} + /* called by update_mmu_cache. */ void __update_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) @@ -63,11 +85,11 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address, if (unlikely(!pfn_valid(pfn))) return; page = pfn_to_page(pfn); - if (page_mapping(page) && test_bit(PG_arch_1, &page->flags)) { + if (page_mapping(page) && test_bit(PG_dcache_dirty, &(page)->flags)) { addr = (unsigned long) page_address(page); if (exec) flush_data_cache_page(addr); - clear_bit(PG_arch_1, &page->flags); + clear_bit(PG_dcache_dirty, &(page)->flags); } } -- GitLab From 202b864ad5aa34989609a3073acbe7a04795b265 Mon Sep 17 00:00:00 2001 From: Chen Liqin Date: Wed, 18 Nov 2009 13:28:13 +0800 Subject: [PATCH 307/618] score: fixed pfn_valid define. Signed-off-by: Cui Bixiong Signed-off-by: Chen Liqin modified: arch/score/include/asm/page.h modified: arch/score/kernel/setup.c modified: arch/score/mm/init.c --- arch/score/include/asm/page.h | 2 +- arch/score/kernel/setup.c | 1 + arch/score/mm/init.c | 5 ----- 3 files changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/score/include/asm/page.h b/arch/score/include/asm/page.h index d92a5a2d36d4..1e9ade8e77e6 100644 --- a/arch/score/include/asm/page.h +++ b/arch/score/include/asm/page.h @@ -74,7 +74,7 @@ extern unsigned long max_pfn; #define page_to_bus(page) (page_to_phys(page)) #define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr))) -#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_mapnr) +#define pfn_valid(pfn) (((pfn) >= min_low_pfn) && ((pfn) < max_low_pfn)) #define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) diff --git a/arch/score/kernel/setup.c b/arch/score/kernel/setup.c index 6a2503c75c4e..6f898c057878 100644 --- a/arch/score/kernel/setup.c +++ b/arch/score/kernel/setup.c @@ -49,6 +49,7 @@ static void __init bootmem_init(void) min_low_pfn = PFN_UP(MEMORY_START); max_low_pfn = PFN_UP(MEMORY_START + MEMORY_SIZE); + max_mapnr = max_low_pfn - min_low_pfn; /* Initialize the boot-time allocator with low memory only. */ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c index 4e3dcd0c4716..8c15b2c85d5a 100644 --- a/arch/score/mm/init.c +++ b/arch/score/mm/init.c @@ -83,7 +83,6 @@ void __init mem_init(void) unsigned long codesize, reservedpages, datasize, initsize; unsigned long tmp, ram = 0; - max_mapnr = max_low_pfn; high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT); totalram_pages += free_all_bootmem(); totalram_pages -= setup_zero_page(); /* Setup zeroed pages. */ @@ -101,10 +100,6 @@ void __init mem_init(void) datasize = (unsigned long) &_edata - (unsigned long) &_etext; initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; - kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT); - kclist_add(&kcore_vmalloc, (void *) VMALLOC_START, - VMALLOC_END - VMALLOC_START); - printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, " "%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n", (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), -- GitLab From ef8355c3a3c7a4d7f1d49881937337ea78ed306a Mon Sep 17 00:00:00 2001 From: Chen Liqin Date: Thu, 17 Dec 2009 18:31:23 +0800 Subject: [PATCH 308/618] score: include asm-generic/param.h in asm/delay.h. Signed-off-by: Cui Bixiong Signed-off-by: Chen Liqin --- arch/score/include/asm/delay.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/score/include/asm/delay.h b/arch/score/include/asm/delay.h index 6726ec199dc0..529e494712a5 100644 --- a/arch/score/include/asm/delay.h +++ b/arch/score/include/asm/delay.h @@ -1,6 +1,8 @@ #ifndef _ASM_SCORE_DELAY_H #define _ASM_SCORE_DELAY_H +#include + static inline void __delay(unsigned long loops) { /* 3 cycles per loop. */ -- GitLab From d3aad6399a240300534d83ffdacfc40e6ed4fa73 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 11 Dec 2009 18:13:40 -0500 Subject: [PATCH 309/618] leds: leds-cobalt-raq.c - use resource_size() Use resource_size() for ioremap. Signed-off-by: H Hartley Sweeten Signed-off-by: Richard Purdie --- drivers/leds/leds-cobalt-raq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c index defc212105f3..438d48384636 100644 --- a/drivers/leds/leds-cobalt-raq.c +++ b/drivers/leds/leds-cobalt-raq.c @@ -84,7 +84,7 @@ static int __devinit cobalt_raq_led_probe(struct platform_device *pdev) if (!res) return -EBUSY; - led_port = ioremap(res->start, res->end - res->start + 1); + led_port = ioremap(res->start, resource_size(res)); if (!led_port) return -ENOMEM; -- GitLab From 3c0f6e1eddeddd95ed04d4a7f0e55ab0aa99adf9 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 11 Dec 2009 16:50:58 -0500 Subject: [PATCH 310/618] leds: leds-cobalt-qube.c: use resource_size() Use resource_size() for ioremap. Signed-off-by: H Hartley Sweeten Signed-off-by: Richard Purdie --- drivers/leds/leds-cobalt-qube.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c index 8816806accd2..de1975388ec3 100644 --- a/drivers/leds/leds-cobalt-qube.c +++ b/drivers/leds/leds-cobalt-qube.c @@ -43,7 +43,7 @@ static int __devinit cobalt_qube_led_probe(struct platform_device *pdev) if (!res) return -EBUSY; - led_port = ioremap(res->start, res->end - res->start + 1); + led_port = ioremap(res->start, resource_size(res)); if (!led_port) return -ENOMEM; -- GitLab From 5b0582ea427b59bf4e70c892aab0b0ba8fbe2306 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 7 Dec 2009 14:35:32 +0100 Subject: [PATCH 311/618] backlight: PTR_ERR return of wrong pointer in cr_backlight_probe() Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin Signed-off-by: Richard Purdie --- drivers/video/backlight/cr_bllcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c index 2914bf104adf..da86db4374a0 100644 --- a/drivers/video/backlight/cr_bllcd.c +++ b/drivers/video/backlight/cr_bllcd.c @@ -201,7 +201,7 @@ static int cr_backlight_probe(struct platform_device *pdev) if (IS_ERR(ldp)) { backlight_device_unregister(bdp); pci_dev_put(lpc_dev); - return PTR_ERR(bdp); + return PTR_ERR(ldp); } pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR, -- GitLab From 2fbe74b90bafebce615466b4c20f96b0465df1ae Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 16 Dec 2009 16:54:43 +0100 Subject: [PATCH 312/618] sound/oss/pss: Fix test of unsigned in pss_reset_dsp() and pss_download_boot() limit and jiffies are unsigned so the test did not work. Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai --- sound/oss/pss.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/oss/pss.c b/sound/oss/pss.c index 83f5ee236b12..e19dd5dcc2de 100644 --- a/sound/oss/pss.c +++ b/sound/oss/pss.c @@ -269,7 +269,7 @@ static int pss_reset_dsp(pss_confdata * devc) unsigned long i, limit = jiffies + HZ/10; outw(0x2000, REG(PSS_CONTROL)); - for (i = 0; i < 32768 && (limit-jiffies >= 0); i++) + for (i = 0; i < 32768 && time_after_eq(limit, jiffies); i++) inw(REG(PSS_CONTROL)); outw(0x0000, REG(PSS_CONTROL)); return 1; @@ -369,11 +369,11 @@ static int pss_download_boot(pss_confdata * devc, unsigned char *block, int size outw(0, REG(PSS_DATA)); limit = jiffies + HZ/10; - for (i = 0; i < 32768 && (limit - jiffies >= 0); i++) + for (i = 0; i < 32768 && time_after_eq(limit, jiffies); i++) val = inw(REG(PSS_STATUS)); limit = jiffies + HZ/10; - for (i = 0; i < 32768 && (limit-jiffies >= 0); i++) + for (i = 0; i < 32768 && time_after_eq(limit, jiffies); i++) { val = inw(REG(PSS_STATUS)); if (val & 0x4000) -- GitLab From ebb83eeb6469bedda83b4dc6f23ddf93eb32b347 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Thu, 17 Dec 2009 12:23:00 +0100 Subject: [PATCH 313/618] ALSA: hda - More ALC663 fixes and support of compatible chips 1. Add more ASUS NB model. 2. Fixed alc663_m51va_setup M51VA has Digital Mic that NID is 0x12. The record source index is 0x9 for ALC663. So, to modify the alc663_m51va_setup function to index 0x9 and add analog Mic aupport function alc663_mode1_setup. 3. Add ASUS mode7 and mode8 modules for ALC663 Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 306 +++++++++++++++++++++++++++++++--- 1 file changed, 282 insertions(+), 24 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c9e860709747..287bb6019df9 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -131,8 +131,8 @@ enum { enum { ALC269_BASIC, ALC269_QUANTA_FL1, - ALC269_ASUS_EEEPC_P703, - ALC269_ASUS_EEEPC_P901, + ALC269_ASUS_AMIC, + ALC269_ASUS_DMIC, ALC269_FUJITSU, ALC269_LIFEBOOK, ALC269_AUTO, @@ -188,6 +188,8 @@ enum { ALC663_ASUS_MODE4, ALC663_ASUS_MODE5, ALC663_ASUS_MODE6, + ALC663_ASUS_MODE7, + ALC663_ASUS_MODE8, ALC272_DELL, ALC272_DELL_ZM1, ALC272_SAMSUNG_NC10, @@ -13232,10 +13234,12 @@ static struct hda_verb alc269_eeepc_amic_init_verbs[] = { /* toggle speaker-output according to the hp-jack state */ static void alc269_speaker_automute(struct hda_codec *codec) { + struct alc_spec *spec = codec->spec; + unsigned int nid = spec->autocfg.hp_pins[0]; unsigned int present; unsigned char bits; - present = snd_hda_jack_detect(codec, 0x15); + present = snd_hda_jack_detect(codec, nid); bits = present ? AMP_IN_MUTE(0) : 0; snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 0, AMP_IN_MUTE(0), bits); @@ -13460,8 +13464,8 @@ static void alc269_auto_init(struct hda_codec *codec) static const char *alc269_models[ALC269_MODEL_LAST] = { [ALC269_BASIC] = "basic", [ALC269_QUANTA_FL1] = "quanta", - [ALC269_ASUS_EEEPC_P703] = "eeepc-p703", - [ALC269_ASUS_EEEPC_P901] = "eeepc-p901", + [ALC269_ASUS_AMIC] = "asus-amic", + [ALC269_ASUS_DMIC] = "asus-dmic", [ALC269_FUJITSU] = "fujitsu", [ALC269_LIFEBOOK] = "lifebook", [ALC269_AUTO] = "auto", @@ -13470,18 +13474,41 @@ static const char *alc269_models[ALC269_MODEL_LAST] = { static struct snd_pci_quirk alc269_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_QUANTA_FL1), SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A", - ALC269_ASUS_EEEPC_P703), - SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_ASUS_EEEPC_P703), - SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_ASUS_EEEPC_P703), - SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_ASUS_EEEPC_P703), - SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_ASUS_EEEPC_P703), - SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_ASUS_EEEPC_P703), - SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_ASUS_EEEPC_P703), + ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1133, "ASUS UJ20ft", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1273, "ASUS UL80JT", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1283, "ASUS U53Jc", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x12b3, "ASUS N82Jv", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x13a3, "ASUS UL30Vt", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1373, "ASUS G73JX", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1383, "ASUS UJ30Jc", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x13d3, "ASUS N61JA", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1413, "ASUS UL50", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1443, "ASUS UL30", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1453, "ASUS M60Jv", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1483, "ASUS UL80", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x14f3, "ASUS F83Vf", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x14e3, "ASUS UL20", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1513, "ASUS UX30", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x15a3, "ASUS N60Jv", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x15b3, "ASUS N60Dp", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x15c3, "ASUS N70De", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x15e3, "ASUS F83T", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1643, "ASUS M60J", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1693, "ASUS F50N", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_ASUS_DMIC), + SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_ASUS_AMIC), + SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_ASUS_AMIC), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901", - ALC269_ASUS_EEEPC_P901), + ALC269_ASUS_DMIC), SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101", - ALC269_ASUS_EEEPC_P901), - SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_ASUS_EEEPC_P901), + ALC269_ASUS_DMIC), + SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005HA", ALC269_ASUS_DMIC), + SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005HA", ALC269_ASUS_DMIC), SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU), SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK), {} @@ -13511,7 +13538,7 @@ static struct alc_config_preset alc269_presets[] = { .setup = alc269_quanta_fl1_setup, .init_hook = alc269_quanta_fl1_init_hook, }, - [ALC269_ASUS_EEEPC_P703] = { + [ALC269_ASUS_AMIC] = { .mixers = { alc269_eeepc_mixer }, .cap_mixer = alc269_epc_capture_mixer, .init_verbs = { alc269_init_verbs, @@ -13525,7 +13552,7 @@ static struct alc_config_preset alc269_presets[] = { .setup = alc269_eeepc_amic_setup, .init_hook = alc269_eeepc_inithook, }, - [ALC269_ASUS_EEEPC_P901] = { + [ALC269_ASUS_DMIC] = { .mixers = { alc269_eeepc_mixer }, .cap_mixer = alc269_epc_capture_mixer, .init_verbs = { alc269_init_verbs, @@ -16160,6 +16187,52 @@ static struct snd_kcontrol_new alc663_g50v_mixer[] = { { } /* end */ }; +static struct hda_bind_ctls alc663_asus_mode7_8_all_bind_switch = { + .ops = &snd_hda_bind_sw, + .values = { + HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT), + HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT), + HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_OUTPUT), + HDA_COMPOSE_AMP_VAL(0x1b, 3, 0, HDA_OUTPUT), + HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT), + 0 + }, +}; + +static struct hda_bind_ctls alc663_asus_mode7_8_sp_bind_switch = { + .ops = &snd_hda_bind_sw, + .values = { + HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT), + HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_OUTPUT), + 0 + }, +}; + +static struct snd_kcontrol_new alc663_mode7_mixer[] = { + HDA_BIND_SW("Master Playback Switch", &alc663_asus_mode7_8_all_bind_switch), + HDA_BIND_VOL("Speaker Playback Volume", &alc663_asus_bind_master_vol), + HDA_BIND_SW("Speaker Playback Switch", &alc663_asus_mode7_8_sp_bind_switch), + HDA_CODEC_MUTE("Headphone1 Playback Switch", 0x1b, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone2 Playback Switch", 0x21, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("IntMic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("IntMic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), + { } /* end */ +}; + +static struct snd_kcontrol_new alc663_mode8_mixer[] = { + HDA_BIND_SW("Master Playback Switch", &alc663_asus_mode7_8_all_bind_switch), + HDA_BIND_VOL("Speaker Playback Volume", &alc663_asus_bind_master_vol), + HDA_BIND_SW("Speaker Playback Switch", &alc663_asus_mode7_8_sp_bind_switch), + HDA_CODEC_MUTE("Headphone1 Playback Switch", 0x15, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone2 Playback Switch", 0x21, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + { } /* end */ +}; + + static struct snd_kcontrol_new alc662_chmode_mixer[] = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, @@ -16447,6 +16520,45 @@ static struct hda_verb alc272_dell_init_verbs[] = { {} }; +static struct hda_verb alc663_mode7_init_verbs[] = { + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x1b, AC_VERB_SET_CONNECT_SEL, 0x01}, + {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */ + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)}, + {0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT}, + {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {} +}; + +static struct hda_verb alc663_mode8_init_verbs[] = { + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */ + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)}, + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT}, + {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {} +}; + static struct snd_kcontrol_new alc662_auto_capture_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT), @@ -16626,6 +16738,54 @@ static void alc663_two_hp_m2_speaker_automute(struct hda_codec *codec) } } +static void alc663_two_hp_m7_speaker_automute(struct hda_codec *codec) +{ + unsigned int present1, present2; + + present1 = snd_hda_codec_read(codec, 0x1b, 0, + AC_VERB_GET_PIN_SENSE, 0) + & AC_PINSENSE_PRESENCE; + present2 = snd_hda_codec_read(codec, 0x21, 0, + AC_VERB_GET_PIN_SENSE, 0) + & AC_PINSENSE_PRESENCE; + + if (present1 || present2) { + snd_hda_codec_write_cache(codec, 0x14, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, 0); + snd_hda_codec_write_cache(codec, 0x17, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, 0); + } else { + snd_hda_codec_write_cache(codec, 0x14, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT); + snd_hda_codec_write_cache(codec, 0x17, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT); + } +} + +static void alc663_two_hp_m8_speaker_automute(struct hda_codec *codec) +{ + unsigned int present1, present2; + + present1 = snd_hda_codec_read(codec, 0x21, 0, + AC_VERB_GET_PIN_SENSE, 0) + & AC_PINSENSE_PRESENCE; + present2 = snd_hda_codec_read(codec, 0x15, 0, + AC_VERB_GET_PIN_SENSE, 0) + & AC_PINSENSE_PRESENCE; + + if (present1 || present2) { + snd_hda_codec_write_cache(codec, 0x14, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, 0); + snd_hda_codec_write_cache(codec, 0x17, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, 0); + } else { + snd_hda_codec_write_cache(codec, 0x14, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT); + snd_hda_codec_write_cache(codec, 0x17, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT); + } +} + static void alc663_m51va_unsol_event(struct hda_codec *codec, unsigned int res) { @@ -16645,7 +16805,7 @@ static void alc663_m51va_setup(struct hda_codec *codec) spec->ext_mic.pin = 0x18; spec->ext_mic.mux_idx = 0; spec->int_mic.pin = 0x12; - spec->int_mic.mux_idx = 1; + spec->int_mic.mux_idx = 9; spec->auto_mic = 1; } @@ -16657,7 +16817,17 @@ static void alc663_m51va_inithook(struct hda_codec *codec) /* ***************** Mode1 ******************************/ #define alc663_mode1_unsol_event alc663_m51va_unsol_event -#define alc663_mode1_setup alc663_m51va_setup + +static void alc663_mode1_setup(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + spec->ext_mic.pin = 0x18; + spec->ext_mic.mux_idx = 0; + spec->int_mic.pin = 0x19; + spec->int_mic.mux_idx = 1; + spec->auto_mic = 1; +} + #define alc663_mode1_inithook alc663_m51va_inithook /* ***************** Mode2 ******************************/ @@ -16674,7 +16844,7 @@ static void alc662_mode2_unsol_event(struct hda_codec *codec, } } -#define alc662_mode2_setup alc663_m51va_setup +#define alc662_mode2_setup alc663_mode1_setup static void alc662_mode2_inithook(struct hda_codec *codec) { @@ -16695,7 +16865,7 @@ static void alc663_mode3_unsol_event(struct hda_codec *codec, } } -#define alc663_mode3_setup alc663_m51va_setup +#define alc663_mode3_setup alc663_mode1_setup static void alc663_mode3_inithook(struct hda_codec *codec) { @@ -16716,7 +16886,7 @@ static void alc663_mode4_unsol_event(struct hda_codec *codec, } } -#define alc663_mode4_setup alc663_m51va_setup +#define alc663_mode4_setup alc663_mode1_setup static void alc663_mode4_inithook(struct hda_codec *codec) { @@ -16737,7 +16907,7 @@ static void alc663_mode5_unsol_event(struct hda_codec *codec, } } -#define alc663_mode5_setup alc663_m51va_setup +#define alc663_mode5_setup alc663_mode1_setup static void alc663_mode5_inithook(struct hda_codec *codec) { @@ -16758,7 +16928,7 @@ static void alc663_mode6_unsol_event(struct hda_codec *codec, } } -#define alc663_mode6_setup alc663_m51va_setup +#define alc663_mode6_setup alc663_mode1_setup static void alc663_mode6_inithook(struct hda_codec *codec) { @@ -16766,6 +16936,50 @@ static void alc663_mode6_inithook(struct hda_codec *codec) alc_mic_automute(codec); } +/* ***************** Mode7 ******************************/ +static void alc663_mode7_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + switch (res >> 26) { + case ALC880_HP_EVENT: + alc663_two_hp_m7_speaker_automute(codec); + break; + case ALC880_MIC_EVENT: + alc_mic_automute(codec); + break; + } +} + +#define alc663_mode7_setup alc663_mode1_setup + +static void alc663_mode7_inithook(struct hda_codec *codec) +{ + alc663_two_hp_m7_speaker_automute(codec); + alc_mic_automute(codec); +} + +/* ***************** Mode8 ******************************/ +static void alc663_mode8_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + switch (res >> 26) { + case ALC880_HP_EVENT: + alc663_two_hp_m8_speaker_automute(codec); + break; + case ALC880_MIC_EVENT: + alc_mic_automute(codec); + break; + } +} + +#define alc663_mode8_setup alc663_m51va_setup + +static void alc663_mode8_inithook(struct hda_codec *codec) +{ + alc663_two_hp_m8_speaker_automute(codec); + alc_mic_automute(codec); +} + static void alc663_g71v_hp_automute(struct hda_codec *codec) { unsigned int present; @@ -16900,6 +17114,8 @@ static const char *alc662_models[ALC662_MODEL_LAST] = { [ALC663_ASUS_MODE4] = "asus-mode4", [ALC663_ASUS_MODE5] = "asus-mode5", [ALC663_ASUS_MODE6] = "asus-mode6", + [ALC663_ASUS_MODE7] = "asus-mode7", + [ALC663_ASUS_MODE8] = "asus-mode8", [ALC272_DELL] = "dell", [ALC272_DELL_ZM1] = "dell-zm1", [ALC272_SAMSUNG_NC10] = "samsung-nc10", @@ -16916,12 +17132,22 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x11d3, "ASUS NB", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x11f3, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1203, "ASUS NB", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1043, 0x1303, "ASUS G60J", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1043, 0x1333, "ASUS G60Jx", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1339, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x13e3, "ASUS N71JA", ALC663_ASUS_MODE7), + SND_PCI_QUIRK(0x1043, 0x1463, "ASUS N71", ALC663_ASUS_MODE7), + SND_PCI_QUIRK(0x1043, 0x14d3, "ASUS G72", ALC663_ASUS_MODE8), + SND_PCI_QUIRK(0x1043, 0x1563, "ASUS N90", ALC663_ASUS_MODE3), + SND_PCI_QUIRK(0x1043, 0x15d3, "ASUS N50SF F50SF", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x16c3, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x16f3, "ASUS K40C K50C", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1733, "ASUS N81De", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1753, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6), SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6), SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1793, "ASUS F50GX", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x17b3, "ASUS F70SL", ALC663_ASUS_MODE3), SND_PCI_QUIRK(0x1043, 0x17c3, "ASUS UX20", ALC663_ASUS_M51VA), SND_PCI_QUIRK(0x1043, 0x17f3, "ASUS X58LE", ALC662_ASUS_MODE2), @@ -17205,6 +17431,36 @@ static struct alc_config_preset alc662_presets[] = { .setup = alc663_mode6_setup, .init_hook = alc663_mode6_inithook, }, + [ALC663_ASUS_MODE7] = { + .mixers = { alc663_mode7_mixer }, + .cap_mixer = alc662_auto_capture_mixer, + .init_verbs = { alc662_init_verbs, + alc663_mode7_init_verbs }, + .num_dacs = ARRAY_SIZE(alc662_dac_nids), + .hp_nid = 0x03, + .dac_nids = alc662_dac_nids, + .dig_out_nid = ALC662_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes), + .channel_mode = alc662_3ST_2ch_modes, + .unsol_event = alc663_mode7_unsol_event, + .setup = alc663_mode7_setup, + .init_hook = alc663_mode7_inithook, + }, + [ALC663_ASUS_MODE8] = { + .mixers = { alc663_mode8_mixer }, + .cap_mixer = alc662_auto_capture_mixer, + .init_verbs = { alc662_init_verbs, + alc663_mode8_init_verbs }, + .num_dacs = ARRAY_SIZE(alc662_dac_nids), + .hp_nid = 0x03, + .dac_nids = alc662_dac_nids, + .dig_out_nid = ALC662_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes), + .channel_mode = alc662_3ST_2ch_modes, + .unsol_event = alc663_mode8_unsol_event, + .setup = alc663_mode8_setup, + .init_hook = alc663_mode8_inithook, + }, [ALC272_DELL] = { .mixers = { alc663_m51va_mixer }, .cap_mixer = alc272_auto_capture_mixer, @@ -17688,7 +17944,9 @@ static struct hda_codec_preset snd_hda_preset_realtek[] = { { .id = 0x10ec0267, .name = "ALC267", .patch = patch_alc268 }, { .id = 0x10ec0268, .name = "ALC268", .patch = patch_alc268 }, { .id = 0x10ec0269, .name = "ALC269", .patch = patch_alc269 }, + { .id = 0x10ec0270, .name = "ALC270", .patch = patch_alc269 }, { .id = 0x10ec0272, .name = "ALC272", .patch = patch_alc662 }, + { .id = 0x10ec0275, .name = "ALC275", .patch = patch_alc269 }, { .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660", .patch = patch_alc861 }, { .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd }, -- GitLab From d4cc6a2eee98faebf2c7d3ebc4b35541c1d47d21 Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Mon, 7 Dec 2009 15:08:13 +0100 Subject: [PATCH 314/618] leds: Add LED class driver for regulator driven LEDs. This driver provides an interface for controlling LEDs (or vibrators) connected to PMICs for which there is a regulator framework driver. This driver can be used, for instance, to control vibrator on all Motorola EZX phones using the pcap-regulator driver services. Signed-off-by: Antonio Ospite Reviewed-by: Mark Brown Signed-off-by: Richard Purdie --- drivers/leds/Kconfig | 6 + drivers/leds/Makefile | 1 + drivers/leds/leds-regulator.c | 242 +++++++++++++++++++++++++++++++++ include/linux/leds-regulator.h | 46 +++++++ 4 files changed, 295 insertions(+) create mode 100644 drivers/leds/leds-regulator.c create mode 100644 include/linux/leds-regulator.h diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index f12a99676628..8a0e1ec95e4a 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -229,6 +229,12 @@ config LEDS_PWM help This option enables support for pwm driven LEDs +config LEDS_REGULATOR + tristate "REGULATOR driven LED support" + depends on LEDS_CLASS && REGULATOR + help + This option enables support for regulator driven LEDs. + config LEDS_BD2802 tristate "LED driver for BD2802 RGB LED" depends on LEDS_CLASS && I2C diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 176f0c674751..9e63869d7c0d 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o +obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o diff --git a/drivers/leds/leds-regulator.c b/drivers/leds/leds-regulator.c new file mode 100644 index 000000000000..7f00de3ef922 --- /dev/null +++ b/drivers/leds/leds-regulator.c @@ -0,0 +1,242 @@ +/* + * leds-regulator.c - LED class driver for regulator driven LEDs. + * + * Copyright (C) 2009 Antonio Ospite + * + * Inspired by leds-wm8350 driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#define to_regulator_led(led_cdev) \ + container_of(led_cdev, struct regulator_led, cdev) + +struct regulator_led { + struct led_classdev cdev; + enum led_brightness value; + int enabled; + struct mutex mutex; + struct work_struct work; + + struct regulator *vcc; +}; + +static inline int led_regulator_get_max_brightness(struct regulator *supply) +{ + int ret; + int voltage = regulator_list_voltage(supply, 0); + + if (voltage <= 0) + return 1; + + /* even if regulator can't change voltages, + * we still assume it can change status + * and the LED can be turned on and off. + */ + ret = regulator_set_voltage(supply, voltage, voltage); + if (ret < 0) + return 1; + + return regulator_count_voltages(supply); +} + +static int led_regulator_get_voltage(struct regulator *supply, + enum led_brightness brightness) +{ + if (brightness == 0) + return -EINVAL; + + return regulator_list_voltage(supply, brightness - 1); +} + + +static void regulator_led_enable(struct regulator_led *led) +{ + int ret; + + if (led->enabled) + return; + + ret = regulator_enable(led->vcc); + if (ret != 0) { + dev_err(led->cdev.dev, "Failed to enable vcc: %d\n", ret); + return; + } + + led->enabled = 1; +} + +static void regulator_led_disable(struct regulator_led *led) +{ + int ret; + + if (!led->enabled) + return; + + ret = regulator_disable(led->vcc); + if (ret != 0) { + dev_err(led->cdev.dev, "Failed to disable vcc: %d\n", ret); + return; + } + + led->enabled = 0; +} + +static void regulator_led_set_value(struct regulator_led *led) +{ + int voltage; + int ret; + + mutex_lock(&led->mutex); + + if (led->value == LED_OFF) { + regulator_led_disable(led); + goto out; + } + + if (led->cdev.max_brightness > 1) { + voltage = led_regulator_get_voltage(led->vcc, led->value); + dev_dbg(led->cdev.dev, "brightness: %d voltage: %d\n", + led->value, voltage); + + ret = regulator_set_voltage(led->vcc, voltage, voltage); + if (ret != 0) + dev_err(led->cdev.dev, "Failed to set voltage %d: %d\n", + voltage, ret); + } + + regulator_led_enable(led); + +out: + mutex_unlock(&led->mutex); +} + +static void led_work(struct work_struct *work) +{ + struct regulator_led *led; + + led = container_of(work, struct regulator_led, work); + regulator_led_set_value(led); +} + +static void regulator_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct regulator_led *led = to_regulator_led(led_cdev); + + led->value = value; + schedule_work(&led->work); +} + +static int __devinit regulator_led_probe(struct platform_device *pdev) +{ + struct led_regulator_platform_data *pdata = pdev->dev.platform_data; + struct regulator_led *led; + struct regulator *vcc; + int ret = 0; + + if (pdata == NULL) { + dev_err(&pdev->dev, "no platform data\n"); + return -ENODEV; + } + + vcc = regulator_get_exclusive(&pdev->dev, "vled"); + if (IS_ERR(vcc)) { + dev_err(&pdev->dev, "Cannot get vcc for %s\n", pdata->name); + return PTR_ERR(vcc); + } + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (led == NULL) { + ret = -ENOMEM; + goto err_vcc; + } + + led->cdev.max_brightness = led_regulator_get_max_brightness(vcc); + if (pdata->brightness > led->cdev.max_brightness) { + dev_err(&pdev->dev, "Invalid default brightness %d\n", + pdata->brightness); + ret = -EINVAL; + goto err_led; + } + led->value = pdata->brightness; + + led->cdev.brightness_set = regulator_led_brightness_set; + led->cdev.name = pdata->name; + led->cdev.flags |= LED_CORE_SUSPENDRESUME; + led->vcc = vcc; + + mutex_init(&led->mutex); + INIT_WORK(&led->work, led_work); + + platform_set_drvdata(pdev, led); + + ret = led_classdev_register(&pdev->dev, &led->cdev); + if (ret < 0) { + cancel_work_sync(&led->work); + goto err_led; + } + + /* to expose the default value to userspace */ + led->cdev.brightness = led->value; + + /* Set the default led status */ + regulator_led_set_value(led); + + return 0; + +err_led: + kfree(led); +err_vcc: + regulator_put(vcc); + return ret; +} + +static int __devexit regulator_led_remove(struct platform_device *pdev) +{ + struct regulator_led *led = platform_get_drvdata(pdev); + + led_classdev_unregister(&led->cdev); + cancel_work_sync(&led->work); + regulator_led_disable(led); + regulator_put(led->vcc); + kfree(led); + return 0; +} + +static struct platform_driver regulator_led_driver = { + .driver = { + .name = "leds-regulator", + .owner = THIS_MODULE, + }, + .probe = regulator_led_probe, + .remove = __devexit_p(regulator_led_remove), +}; + +static int __init regulator_led_init(void) +{ + return platform_driver_register(®ulator_led_driver); +} +module_init(regulator_led_init); + +static void __exit regulator_led_exit(void) +{ + platform_driver_unregister(®ulator_led_driver); +} +module_exit(regulator_led_exit); + +MODULE_AUTHOR("Antonio Ospite "); +MODULE_DESCRIPTION("Regulator driven LED driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:leds-regulator"); diff --git a/include/linux/leds-regulator.h b/include/linux/leds-regulator.h new file mode 100644 index 000000000000..5a8eb389aab8 --- /dev/null +++ b/include/linux/leds-regulator.h @@ -0,0 +1,46 @@ +/* + * leds-regulator.h - platform data structure for regulator driven LEDs. + * + * Copyright (C) 2009 Antonio Ospite + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LINUX_LEDS_REGULATOR_H +#define __LINUX_LEDS_REGULATOR_H + +/* + * Use "vled" as supply id when declaring the regulator consumer: + * + * static struct regulator_consumer_supply pcap_regulator_VVIB_consumers [] = { + * { .dev_name = "leds-regulator.0", supply = "vled" }, + * }; + * + * If you have several regulator driven LEDs, you can append a numerical id to + * .dev_name as done above, and use the same id when declaring the platform + * device: + * + * static struct led_regulator_platform_data a780_vibrator_data = { + * .name = "a780::vibrator", + * }; + * + * static struct platform_device a780_vibrator = { + * .name = "leds-regulator", + * .id = 0, + * .dev = { + * .platform_data = &a780_vibrator_data, + * }, + * }; + */ + +#include + +struct led_regulator_platform_data { + char *name; /* LED name as expected by LED class */ + enum led_brightness brightness; /* initial brightness value */ +}; + +#endif /* __LINUX_LEDS_REGULATOR_H */ -- GitLab From 254bba6a7e28c77d8b32d9eaeba02d4943ee844e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Einar=20R=C3=BCnkaru?= Date: Wed, 16 Dec 2009 22:16:13 +0200 Subject: [PATCH 315/618] ALSA: hda - Fixed internal mic initialization for Dell Vostro 1015 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixed initialization of internal mic and added internal mic boost control Renamed analog mic boost control to ext mic boost contol. Name pair analog/digital seems too confusing for a normal user. Signed-off-by: Einar Rünkaru Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 39 ++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index a09c03c3f62b..ca9ad9fddbf2 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -111,6 +111,7 @@ struct conexant_spec { unsigned int dell_automute; unsigned int port_d_mode; unsigned char ext_mic_bias; + unsigned int dell_vostro; }; static int conexant_playback_pcm_open(struct hda_pcm_stream *hinfo, @@ -2109,9 +2110,12 @@ static int cxt5066_mic_boost_mux_enum_get(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); int val; + hda_nid_t nid = kcontrol->private_value & 0xff; + int inout = (kcontrol->private_value & 0x100) ? + AC_AMP_GET_INPUT : AC_AMP_GET_OUTPUT; - val = snd_hda_codec_read(codec, 0x17, 0, - AC_VERB_GET_AMP_GAIN_MUTE, AC_AMP_GET_OUTPUT); + val = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_AMP_GAIN_MUTE, inout); ucontrol->value.enumerated.item[0] = val & AC_AMP_GAIN; return 0; @@ -2123,6 +2127,9 @@ static int cxt5066_mic_boost_mux_enum_put(struct snd_kcontrol *kcontrol, struct hda_codec *codec = snd_kcontrol_chip(kcontrol); const struct hda_input_mux *imux = &cxt5066_analog_mic_boost; unsigned int idx; + hda_nid_t nid = kcontrol->private_value & 0xff; + int inout = (kcontrol->private_value & 0x100) ? + AC_AMP_SET_INPUT : AC_AMP_SET_OUTPUT; if (!imux->num_items) return 0; @@ -2130,9 +2137,9 @@ static int cxt5066_mic_boost_mux_enum_put(struct snd_kcontrol *kcontrol, if (idx >= imux->num_items) idx = imux->num_items - 1; - snd_hda_codec_write_cache(codec, 0x17, 0, + snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, - AC_AMP_SET_RIGHT | AC_AMP_SET_LEFT | AC_AMP_SET_OUTPUT | + AC_AMP_SET_RIGHT | AC_AMP_SET_LEFT | inout | imux->items[idx].index); return 1; @@ -2201,10 +2208,11 @@ static struct snd_kcontrol_new cxt5066_mixers[] = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Analog Mic Boost Capture Enum", + .name = "Ext Mic Boost Capture Enum", .info = cxt5066_mic_boost_mux_enum_info, .get = cxt5066_mic_boost_mux_enum_get, .put = cxt5066_mic_boost_mux_enum_put, + .private_value = 0x17, }, HDA_BIND_VOL("Capture Volume", &cxt5066_bind_capture_vol_others), @@ -2212,6 +2220,18 @@ static struct snd_kcontrol_new cxt5066_mixers[] = { {} }; +static struct snd_kcontrol_new cxt5066_vostro_mixers[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Int Mic Boost Capture Enum", + .info = cxt5066_mic_boost_mux_enum_info, + .get = cxt5066_mic_boost_mux_enum_get, + .put = cxt5066_mic_boost_mux_enum_put, + .private_value = 0x23 | 0x100, + }, + {} +}; + static struct hda_verb cxt5066_init_verbs[] = { {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Port B */ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Port C */ @@ -2397,11 +2417,16 @@ static struct hda_verb cxt5066_init_verbs_portd_lo[] = { /* initialize jack-sensing, too */ static int cxt5066_init(struct hda_codec *codec) { + struct conexant_spec *spec = codec->spec; + snd_printdd("CXT5066: init\n"); conexant_init(codec); if (codec->patch_ops.unsol_event) { cxt5066_hp_automute(codec); - cxt5066_automic(codec); + if (spec->dell_vostro) + cxt5066_vostro_automic(codec); + else + cxt5066_automic(codec); } return 0; } @@ -2500,7 +2525,9 @@ static int patch_cxt5066(struct hda_codec *codec) spec->init_verbs[0] = cxt5066_init_verbs_vostro; spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc; spec->mixers[spec->num_mixers++] = cxt5066_mixers; + spec->mixers[spec->num_mixers++] = cxt5066_vostro_mixers; spec->port_d_mode = 0; + spec->dell_vostro = 1; /* no S/PDIF out */ spec->multiout.dig_out_nid = 0; -- GitLab From c0f8faf0c7cd497ec7c1d61e1e9424f4384c1f68 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Einar=20R=C3=BCnkaru?= Date: Wed, 16 Dec 2009 22:41:36 +0200 Subject: [PATCH 316/618] ALSA: hda - Make use of beep device found in Dell Vostro 1015n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Conexant CX20583-10Z has digital beep device with volume control. Making use of them. Signed-off-by: Einar Rünkaru Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index ca9ad9fddbf2..c578c28f368e 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -29,6 +29,7 @@ #include "hda_codec.h" #include "hda_local.h" +#include "hda_beep.h" #define CXT_PIN_DIR_IN 0x00 #define CXT_PIN_DIR_OUT 0x01 @@ -477,6 +478,7 @@ static void conexant_free(struct hda_codec *codec) snd_array_free(&spec->jacks); } #endif + snd_hda_detach_beep_device(codec); kfree(codec->spec); } @@ -2229,6 +2231,7 @@ static struct snd_kcontrol_new cxt5066_vostro_mixers[] = { .put = cxt5066_mic_boost_mux_enum_put, .private_value = 0x23 | 0x100, }, + HDA_CODEC_VOLUME_MONO("Beep Playback Volume", 0x13, 1, 0x0, HDA_OUTPUT), {} }; @@ -2528,6 +2531,7 @@ static int patch_cxt5066(struct hda_codec *codec) spec->mixers[spec->num_mixers++] = cxt5066_vostro_mixers; spec->port_d_mode = 0; spec->dell_vostro = 1; + snd_hda_attach_beep_device(codec, 0x13); /* no S/PDIF out */ spec->multiout.dig_out_nid = 0; -- GitLab From 9695fff8f84d7ab849139750036e443b85804edd Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Sat, 28 Nov 2009 12:55:51 +0100 Subject: [PATCH 317/618] leds: leds-pca9532.h- indent with tabs, not spaces Signed-off-by: Antonio Ospite Signed-off-by: Richard Purdie --- include/linux/leds-pca9532.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h index 96eea90f01a8..f158eb1149aa 100644 --- a/include/linux/leds-pca9532.h +++ b/include/linux/leds-pca9532.h @@ -32,7 +32,7 @@ struct pca9532_led { struct i2c_client *client; char *name; struct led_classdev ldev; - struct work_struct work; + struct work_struct work; enum pca9532_type type; enum pca9532_state state; }; -- GitLab From eedd898f6910b88aa2052461ad0c3f443b45bb00 Mon Sep 17 00:00:00 2001 From: "akpm@linux-foundation.org" Date: Fri, 13 Nov 2009 19:56:37 -0800 Subject: [PATCH 318/618] leds: drivers/leds/leds-ss4200.c: fix return statement drivers/leds/leds-ss4200.c: In function 'ich7_lpc_probe': drivers/leds/leds-ss4200.c:353: warning: 'return' with no value, in function returning non-void Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- drivers/leds/leds-ss4200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c index c7f634727d67..97f04984c1ca 100644 --- a/drivers/leds/leds-ss4200.c +++ b/drivers/leds/leds-ss4200.c @@ -350,7 +350,7 @@ static int __devinit ich7_lpc_probe(struct pci_dev *dev, status = pci_enable_device(dev); if (status) { dev_err(&dev->dev, "pci_enable_device failed\n"); - return; + return -EIO; } nas_gpio_pci_dev = dev; -- GitLab From 51de036ba388a1bda08755f7c0d3d1ae27c81e66 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 26 Nov 2009 19:41:02 +0100 Subject: [PATCH 319/618] leds: use default-on trigger for Cobalt Qube This patch changes the default trigger from "ide-disk" to "default-on". Users updating from kernels not having this LED driver will prefer having the same LED behavior as they used to. Signed-off-by: Florian Fainelli Signed-off-by: Richard Purdie --- drivers/leds/leds-cobalt-qube.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c index de1975388ec3..da5fb016b1a5 100644 --- a/drivers/leds/leds-cobalt-qube.c +++ b/drivers/leds/leds-cobalt-qube.c @@ -31,7 +31,7 @@ static struct led_classdev qube_front_led = { .name = "qube::front", .brightness = LED_FULL, .brightness_set = qube_front_led_set, - .default_trigger = "ide-disk", + .default_trigger = "default-on", }; static int __devinit cobalt_qube_led_probe(struct platform_device *pdev) -- GitLab From 1998111582f5d726ca4dbf9d68935d9e7c994374 Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Sun, 29 Nov 2009 13:12:21 +0100 Subject: [PATCH 320/618] leds: leds-lp3944.h - remove unneeded includes These were needed in the first version of the driver because we used to expose workqueue and led class details in the header file, now we don't. Signed-off-by: Antonio Ospite Signed-off-by: Richard Purdie --- include/linux/leds-lp3944.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/include/linux/leds-lp3944.h b/include/linux/leds-lp3944.h index afc9f9fd70f5..2618aa9063bc 100644 --- a/include/linux/leds-lp3944.h +++ b/include/linux/leds-lp3944.h @@ -12,9 +12,6 @@ #ifndef __LINUX_LEDS_LP3944_H #define __LINUX_LEDS_LP3944_H -#include -#include - #define LP3944_LED0 0 #define LP3944_LED1 1 #define LP3944_LED2 2 -- GitLab From e45906203d27296b47e56efc1219f9a200bfc2db Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 27 Nov 2009 06:17:38 +0100 Subject: [PATCH 321/618] leds: leds-pwm: Set led_classdev max_brightness Currently the driver leds-pwm doesn't set max_brightness for the led device although it's platform data proides a maximum brightness. Instead it stores its own private driver struct. The max_brightness defaults to 255 for led device if it has not been set. As a result any leds-pwm device with a different maximum brightness will show incorrect behavior, as it is posible to either set a longer then period duty time or not be able to switch the led to full brightness. Signed-off-by: Lars-Peter Clausen Signed-off-by: Richard Purdie --- drivers/leds/leds-pwm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index cdfdc8714e10..88b1dd091cfb 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -27,7 +27,6 @@ struct led_pwm_data { struct pwm_device *pwm; unsigned int active_low; unsigned int period; - unsigned int max_brightness; }; static void led_pwm_set(struct led_classdev *led_cdev, @@ -35,7 +34,7 @@ static void led_pwm_set(struct led_classdev *led_cdev, { struct led_pwm_data *led_dat = container_of(led_cdev, struct led_pwm_data, cdev); - unsigned int max = led_dat->max_brightness; + unsigned int max = led_dat->cdev.max_brightness; unsigned int period = led_dat->period; if (brightness == 0) { @@ -77,10 +76,10 @@ static int led_pwm_probe(struct platform_device *pdev) led_dat->cdev.name = cur_led->name; led_dat->cdev.default_trigger = cur_led->default_trigger; led_dat->active_low = cur_led->active_low; - led_dat->max_brightness = cur_led->max_brightness; led_dat->period = cur_led->pwm_period_ns; led_dat->cdev.brightness_set = led_pwm_set; led_dat->cdev.brightness = LED_OFF; + led_dat->cdev.max_brightness = cur_led->max_brightness; led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&pdev->dev, &led_dat->cdev); -- GitLab From cfc3899fcd0b3b990b29d3d33f75f4edf715e7d1 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 10 Nov 2009 17:20:40 +0000 Subject: [PATCH 322/618] backlight: Pass device through notify callback in the pwm driver Add the device to the notify callback's arguments in the PWM backlight driver. This brings the notify callback into line with the other callbacks defined by this driver. Signed-off-by: Ben Dooks Signed-off-by: Simtec Linux Team Signed-off-by: Richard Purdie --- drivers/video/backlight/pwm_bl.c | 9 ++++++--- include/linux/pwm_backlight.h | 2 +- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index df9e0b32cf39..9d2ec2a1cce8 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -22,8 +22,10 @@ struct pwm_bl_data { struct pwm_device *pwm; + struct device *dev; unsigned int period; - int (*notify)(int brightness); + int (*notify)(struct device *, + int brightness); }; static int pwm_backlight_update_status(struct backlight_device *bl) @@ -39,7 +41,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl) brightness = 0; if (pb->notify) - brightness = pb->notify(brightness); + brightness = pb->notify(pb->dev, brightness); if (brightness == 0) { pwm_config(pb->pwm, 0, pb->period); @@ -88,6 +90,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->period = data->pwm_period_ns; pb->notify = data->notify; + pb->dev = &pdev->dev; pb->pwm = pwm_request(data->pwm_id, "backlight"); if (IS_ERR(pb->pwm)) { @@ -146,7 +149,7 @@ static int pwm_backlight_suspend(struct platform_device *pdev, struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev); if (pb->notify) - pb->notify(0); + pb->notify(pb->dev, 0); pwm_config(pb->pwm, 0, pb->period); pwm_disable(pb->pwm); return 0; diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h index 7a9754c96775..01b3d759f1fc 100644 --- a/include/linux/pwm_backlight.h +++ b/include/linux/pwm_backlight.h @@ -10,7 +10,7 @@ struct platform_pwm_backlight_data { unsigned int dft_brightness; unsigned int pwm_period_ns; int (*init)(struct device *dev); - int (*notify)(int brightness); + int (*notify)(struct device *dev, int brightness); void (*exit)(struct device *dev); }; -- GitLab From f7a297af49e5d9d2c577466307e8ef392750c9d9 Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Wed, 2 Dec 2009 00:41:31 +0100 Subject: [PATCH 323/618] backlight: mbp_nvidia_bl - add two more MacBookPro variants This adds the MacBookPro 5,3 and 5,4 to the DMI tables. Signed-off-by: Daniel Ritz Signed-off-by: Richard Purdie --- drivers/video/backlight/mbp_nvidia_bl.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c index 581246894733..2e78b0784bdc 100644 --- a/drivers/video/backlight/mbp_nvidia_bl.c +++ b/drivers/video/backlight/mbp_nvidia_bl.c @@ -218,6 +218,24 @@ static const struct dmi_system_id __initdata mbp_device_table[] = { }, .driver_data = (void *)&nvidia_chipset_data, }, + { + .callback = mbp_dmi_match, + .ident = "MacBookPro 5,3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,3"), + }, + .driver_data = (void *)&nvidia_chipset_data, + }, + { + .callback = mbp_dmi_match, + .ident = "MacBookPro 5,4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,4"), + }, + .driver_data = (void *)&nvidia_chipset_data, + }, { .callback = mbp_dmi_match, .ident = "MacBookPro 5,5", -- GitLab From 5d27c23df09b702868d9a3bff86ec6abd22963ac Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 17 Dec 2009 13:16:32 +0100 Subject: [PATCH 324/618] perf events: Dont report side-band events on each cpu for per-task-per-cpu events Acme noticed that his FORK/MMAP numbers were inflated by about the same factor as his cpu-count. This led to the discovery of a few more sites that need to respect the event->cpu filter. Reported-by: Arnaldo Carvalho de Melo Signed-off-by: Peter Zijlstra Cc: Paul Mackerras LKML-Reference: <20091217121830.215333434@chello.nl> Signed-off-by: Ingo Molnar --- kernel/perf_event.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 8ab86988bd24..03cc061398d1 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -1381,6 +1381,9 @@ static void perf_ctx_adjust_freq(struct perf_event_context *ctx) if (event->state != PERF_EVENT_STATE_ACTIVE) continue; + if (event->cpu != -1 && event->cpu != smp_processor_id()) + continue; + hwc = &event->hw; interrupts = hwc->interrupts; @@ -3265,6 +3268,9 @@ static void perf_event_task_output(struct perf_event *event, static int perf_event_task_match(struct perf_event *event) { + if (event->cpu != -1 && event->cpu != smp_processor_id()) + return 0; + if (event->attr.comm || event->attr.mmap || event->attr.task) return 1; @@ -3290,12 +3296,11 @@ static void perf_event_task_event(struct perf_task_event *task_event) rcu_read_lock(); cpuctx = &get_cpu_var(perf_cpu_context); perf_event_task_ctx(&cpuctx->ctx, task_event); - put_cpu_var(perf_cpu_context); - if (!ctx) ctx = rcu_dereference(task_event->task->perf_event_ctxp); if (ctx) perf_event_task_ctx(ctx, task_event); + put_cpu_var(perf_cpu_context); rcu_read_unlock(); } @@ -3372,6 +3377,9 @@ static void perf_event_comm_output(struct perf_event *event, static int perf_event_comm_match(struct perf_event *event) { + if (event->cpu != -1 && event->cpu != smp_processor_id()) + return 0; + if (event->attr.comm) return 1; @@ -3408,15 +3416,10 @@ static void perf_event_comm_event(struct perf_comm_event *comm_event) rcu_read_lock(); cpuctx = &get_cpu_var(perf_cpu_context); perf_event_comm_ctx(&cpuctx->ctx, comm_event); - put_cpu_var(perf_cpu_context); - - /* - * doesn't really matter which of the child contexts the - * events ends up in. - */ ctx = rcu_dereference(current->perf_event_ctxp); if (ctx) perf_event_comm_ctx(ctx, comm_event); + put_cpu_var(perf_cpu_context); rcu_read_unlock(); } @@ -3491,6 +3494,9 @@ static void perf_event_mmap_output(struct perf_event *event, static int perf_event_mmap_match(struct perf_event *event, struct perf_mmap_event *mmap_event) { + if (event->cpu != -1 && event->cpu != smp_processor_id()) + return 0; + if (event->attr.mmap) return 1; @@ -3564,15 +3570,10 @@ static void perf_event_mmap_event(struct perf_mmap_event *mmap_event) rcu_read_lock(); cpuctx = &get_cpu_var(perf_cpu_context); perf_event_mmap_ctx(&cpuctx->ctx, mmap_event); - put_cpu_var(perf_cpu_context); - - /* - * doesn't really matter which of the child contexts the - * events ends up in. - */ ctx = rcu_dereference(current->perf_event_ctxp); if (ctx) perf_event_mmap_ctx(ctx, mmap_event); + put_cpu_var(perf_cpu_context); rcu_read_unlock(); kfree(buf); @@ -3863,6 +3864,9 @@ static int perf_swevent_match(struct perf_event *event, struct perf_sample_data *data, struct pt_regs *regs) { + if (event->cpu != -1 && event->cpu != smp_processor_id()) + return 0; + if (!perf_swevent_is_counting(event)) return 0; -- GitLab From 733421516b42c44b9e21f1793c430cc801ef8324 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 17 Dec 2009 13:16:27 +0100 Subject: [PATCH 325/618] sched: Move TASK_STATE_TO_CHAR_STR near the TASK_state bits So that we don't keep forgetting about it. Signed-off-by: Peter Zijlstra LKML-Reference: <20091217121829.815779372@chello.nl> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 973b2b89f86d..c28ed1b1d7c2 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -193,6 +193,8 @@ print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) #define TASK_WAKEKILL 128 #define TASK_WAKING 256 +#define TASK_STATE_TO_CHAR_STR "RSDTtZX" + /* Convenience macros for the sake of set_task_state */ #define TASK_KILLABLE (TASK_WAKEKILL | TASK_UNINTERRUPTIBLE) #define TASK_STOPPED (TASK_WAKEKILL | __TASK_STOPPED) @@ -2595,8 +2597,6 @@ static inline void mm_init_owner(struct mm_struct *mm, struct task_struct *p) } #endif /* CONFIG_MM_OWNER */ -#define TASK_STATE_TO_CHAR_STR "RSDTtZX" - #endif /* __KERNEL__ */ #endif -- GitLab From 44d90df6b757c59651ddd55f1a84f28132b50d29 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 17 Dec 2009 13:16:28 +0100 Subject: [PATCH 326/618] sched: Add missing state chars to TASK_STATE_TO_CHAR_STR We grew 3 new task states since the last time someone touched it. Signed-off-by: Peter Zijlstra LKML-Reference: <20091217121829.892737686@chello.nl> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index c28ed1b1d7c2..94858df38a87 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -193,7 +193,7 @@ print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) #define TASK_WAKEKILL 128 #define TASK_WAKING 256 -#define TASK_STATE_TO_CHAR_STR "RSDTtZX" +#define TASK_STATE_TO_CHAR_STR "RSDTtZXxKW" /* Convenience macros for the sake of set_task_state */ #define TASK_KILLABLE (TASK_WAKEKILL | TASK_UNINTERRUPTIBLE) -- GitLab From 464763cf1c6df632dccc8f2f4c7e50163154a2c0 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 17 Dec 2009 13:16:29 +0100 Subject: [PATCH 327/618] sched: Update task_state_arraypwith new states Neglected because its hidden... (who reads comments anyway) Signed-off-by: Peter Zijlstra LKML-Reference: <20091217121829.970166036@chello.nl> Signed-off-by: Ingo Molnar --- fs/proc/array.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/proc/array.c b/fs/proc/array.c index 4badde179b18..96361e8fa3a8 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -138,9 +138,12 @@ static const char *task_state_array[] = { "S (sleeping)", /* 1 */ "D (disk sleep)", /* 2 */ "T (stopped)", /* 4 */ - "T (tracing stop)", /* 8 */ + "t (tracing stop)", /* 8 */ "Z (zombie)", /* 16 */ - "X (dead)" /* 32 */ + "X (dead)", /* 32 */ + "x (dead)", /* 64 */ + "K (wakekill)", /* 128 */ + "W (waking)", /* 256 */ }; static inline const char *get_task_state(struct task_struct *tsk) -- GitLab From e1781538cf5c870ab696e9b8f0a5c498d3900f2f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 17 Dec 2009 13:16:30 +0100 Subject: [PATCH 328/618] sched: Assert task state bits at build time Since everybody is lazy and prone to forgetting things, make the compiler help us a bit. Signed-off-by: Peter Zijlstra LKML-Reference: <20091217121830.060186433@chello.nl> Signed-off-by: Ingo Molnar --- fs/proc/array.c | 18 ++++++++++-------- include/linux/sched.h | 4 ++++ 2 files changed, 14 insertions(+), 8 deletions(-) diff --git a/fs/proc/array.c b/fs/proc/array.c index 96361e8fa3a8..f560325c444f 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -134,14 +134,14 @@ static inline void task_name(struct seq_file *m, struct task_struct *p) * simple bit tests. */ static const char *task_state_array[] = { - "R (running)", /* 0 */ - "S (sleeping)", /* 1 */ - "D (disk sleep)", /* 2 */ - "T (stopped)", /* 4 */ - "t (tracing stop)", /* 8 */ - "Z (zombie)", /* 16 */ - "X (dead)", /* 32 */ - "x (dead)", /* 64 */ + "R (running)", /* 0 */ + "S (sleeping)", /* 1 */ + "D (disk sleep)", /* 2 */ + "T (stopped)", /* 4 */ + "t (tracing stop)", /* 8 */ + "Z (zombie)", /* 16 */ + "X (dead)", /* 32 */ + "x (dead)", /* 64 */ "K (wakekill)", /* 128 */ "W (waking)", /* 256 */ }; @@ -151,6 +151,8 @@ static inline const char *get_task_state(struct task_struct *tsk) unsigned int state = (tsk->state & TASK_REPORT) | tsk->exit_state; const char **p = &task_state_array[0]; + BUILD_BUG_ON(1 + ilog2(TASK_STATE_MAX) != ARRAY_SIZE(task_state_array)); + while (state) { p++; state >>= 1; diff --git a/include/linux/sched.h b/include/linux/sched.h index 94858df38a87..37543876ddf5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -192,9 +192,13 @@ print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) #define TASK_DEAD 64 #define TASK_WAKEKILL 128 #define TASK_WAKING 256 +#define TASK_STATE_MAX 512 #define TASK_STATE_TO_CHAR_STR "RSDTtZXxKW" +extern char ___assert_task_state[1 - 2*!!( + sizeof(TASK_STATE_TO_CHAR_STR)-1 != ilog2(TASK_STATE_MAX)+1)]; + /* Convenience macros for the sake of set_task_state */ #define TASK_KILLABLE (TASK_WAKEKILL | TASK_UNINTERRUPTIBLE) #define TASK_STOPPED (TASK_WAKEKILL | __TASK_STOPPED) -- GitLab From 077614ee1e93245a3b9a4e1213659405dbeb0ba6 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 17 Dec 2009 13:16:31 +0100 Subject: [PATCH 329/618] sched: Fix broken assertion There's a preemption race in the set_task_cpu() debug check in that when we get preempted after setting task->state we'd still be on the rq proper, but fail the test. Check for preempted tasks, since those are always on the RQ. Signed-off-by: Peter Zijlstra LKML-Reference: <20091217121830.137155561@chello.nl> Signed-off-by: Ingo Molnar --- kernel/sched.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 7be88a7be047..720df108a2d6 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2041,7 +2041,8 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu) * We should never call set_task_cpu() on a blocked task, * ttwu() will sort out the placement. */ - WARN_ON_ONCE(p->state != TASK_RUNNING && p->state != TASK_WAKING); + WARN_ON_ONCE(p->state != TASK_RUNNING && p->state != TASK_WAKING && + !(task_thread_info(p)->preempt_count & PREEMPT_ACTIVE)); #endif trace_sched_migrate_task(p, new_cpu); -- GitLab From 035eb0cff0671ada49ba9f3e5c9e7b0cb950efea Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 17 Dec 2009 15:00:26 +0100 Subject: [PATCH 330/618] ALSA: hda - Fix missing capsrc_nids for ALC88x Some model quirks missed the corresponding capsrc_nids. This resulted in non-working capture source selection. Signed-off-by: Takashi Iwai Cc: --- sound/pci/hda/patch_realtek.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 287bb6019df9..d9a9f0c7cf5b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9238,6 +9238,8 @@ static struct alc_config_preset alc882_presets[] = { .dac_nids = alc883_dac_nids, .num_adc_nids = ARRAY_SIZE(alc889_adc_nids), .adc_nids = alc889_adc_nids, + .capsrc_nids = alc889_capsrc_nids, + .capsrc_nids = alc889_capsrc_nids, .dig_out_nid = ALC883_DIGOUT_NID, .dig_in_nid = ALC883_DIGIN_NID, .slave_dig_outs = alc883_slave_dig_outs, @@ -9284,6 +9286,7 @@ static struct alc_config_preset alc882_presets[] = { .dac_nids = alc883_dac_nids, .adc_nids = alc883_adc_nids_alt, .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_alt), + .capsrc_nids = alc883_capsrc_nids, .dig_out_nid = ALC883_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), .channel_mode = alc883_3ST_2ch_modes, @@ -9430,6 +9433,7 @@ static struct alc_config_preset alc882_presets[] = { .dac_nids = alc883_dac_nids, .adc_nids = alc883_adc_nids_alt, .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_alt), + .capsrc_nids = alc883_capsrc_nids, .num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes), .channel_mode = alc883_sixstack_modes, .input_mux = &alc883_capture_source, @@ -9491,6 +9495,7 @@ static struct alc_config_preset alc882_presets[] = { .dac_nids = alc883_dac_nids, .adc_nids = alc883_adc_nids_alt, .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_alt), + .capsrc_nids = alc883_capsrc_nids, .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), .channel_mode = alc883_3ST_2ch_modes, .input_mux = &alc883_lenovo_101e_capture_source, @@ -9670,6 +9675,7 @@ static struct alc_config_preset alc882_presets[] = { alc880_gpio1_init_verbs }, .adc_nids = alc883_adc_nids, .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), + .capsrc_nids = alc883_capsrc_nids, .dac_nids = alc883_dac_nids, .num_dacs = ARRAY_SIZE(alc883_dac_nids), .channel_mode = alc889A_mb31_6ch_modes, -- GitLab From c051346b7db27aaf674b8f3b4955240580b2a58a Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 17 Dec 2009 06:56:11 -0800 Subject: [PATCH 331/618] Makefile: set LC_CTYPE, LC_COLLATE, LC_NUMERIC to C There are a number of common Unix constructs like character ranges in grep/sed/awk which don't work as expected with LC_COLLATE set to other than C. Similarly, set LC_CTYPE and LC_NUMERIC to C to avoid other nasty surprises. In order to make sure these actually take effect we also have to clear LC_ALL. Signed-off-by: H. Peter Anvin Acked-by: Michal Marek Acked-by: Masami Hiramatsu Acked-by: Roland Dreier Cc: Sam Ravnborg LKML-Reference: <4B2A1761.4070904@suse.cz> --- Makefile | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Makefile b/Makefile index 33d4732a6c4a..6e39af1d8bc4 100644 --- a/Makefile +++ b/Makefile @@ -16,6 +16,13 @@ NAME = Man-Eating Seals of Antiquity # o print "Entering directory ..."; MAKEFLAGS += -rR --no-print-directory +# Avoid funny character set dependencies +LC_ALL= +LC_CTYPE=C +LC_COLLATE=C +LC_NUMERIC=C +export LC_ALL LC_CTYPE LC_COLLATE LC_NUMERIC + # We are using a recursive build, so we need to do a little thinking # to get the ordering right. # -- GitLab From 4beb3d6d144c41525541cce2b611858b2645c725 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 16 Dec 2009 17:39:48 -0800 Subject: [PATCH 332/618] x86: Don't use POSIX character classes in gen-insn-attr-x86.awk Not all awk implementations (including the default awk in Ubuntu 9.10) support POSIX character classes. Since x86-opcode-map.txt is plain ASCII, we can just use explicit ranges for lower case, alphabetic, and alphanumeric characters instead. Signed-off-by: Roland Dreier Acked-by: Masami Hiramatsu LKML-Reference: Signed-off-by: H. Peter Anvin --- arch/x86/tools/gen-insn-attr-x86.awk | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/arch/x86/tools/gen-insn-attr-x86.awk b/arch/x86/tools/gen-insn-attr-x86.awk index 7a6850683c34..eaf11f52fc0b 100644 --- a/arch/x86/tools/gen-insn-attr-x86.awk +++ b/arch/x86/tools/gen-insn-attr-x86.awk @@ -6,8 +6,6 @@ # Awk implementation sanity check function check_awk_implement() { - if (!match("abc", "[[:lower:]]+")) - return "Your awk doesn't support charactor-class." if (sprintf("%x", 0) != "0") return "Your awk has a printf-format problem." return "" @@ -44,12 +42,12 @@ BEGIN { delete gtable delete atable - opnd_expr = "^[[:alpha:]/]" + opnd_expr = "^[A-Za-z/]" ext_expr = "^\\(" sep_expr = "^\\|$" - group_expr = "^Grp[[:alnum:]]+" + group_expr = "^Grp[0-9A-Za-z]+" - imm_expr = "^[IJAO][[:lower:]]" + imm_expr = "^[IJAO][a-z]" imm_flag["Ib"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)" imm_flag["Jb"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)" imm_flag["Iw"] = "INAT_MAKE_IMM(INAT_IMM_WORD)" @@ -62,7 +60,7 @@ BEGIN { imm_flag["Ob"] = "INAT_MOFFSET" imm_flag["Ov"] = "INAT_MOFFSET" - modrm_expr = "^([CDEGMNPQRSUVW/][[:lower:]]+|NTA|T[012])" + modrm_expr = "^([CDEGMNPQRSUVW/][a-z]+|NTA|T[012])" force64_expr = "\\([df]64\\)" rex_expr = "^REX(\\.[XRWB]+)*" fpu_expr = "^ESC" # TODO -- GitLab From 04a1e62c2cec820501f93526ad1e46073b802dc4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 17 Dec 2009 07:04:56 -0800 Subject: [PATCH 333/618] x86/ptrace: make genregs[32]_get/set more robust The loop condition is fragile: we compare an unsigned value to zero, and then decrement it by something larger than one in the loop. All the callers should be passing in appropriately aligned buffer lengths, but it's better to just not rely on it, and have some appropriate defensive loop limits. Acked-by: Roland McGrath Signed-off-by: Linus Torvalds --- arch/x86/kernel/ptrace.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 2779321046bd..017d937639fe 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -509,14 +509,14 @@ static int genregs_get(struct task_struct *target, { if (kbuf) { unsigned long *k = kbuf; - while (count > 0) { + while (count >= sizeof(*k)) { *k++ = getreg(target, pos); count -= sizeof(*k); pos += sizeof(*k); } } else { unsigned long __user *u = ubuf; - while (count > 0) { + while (count >= sizeof(*u)) { if (__put_user(getreg(target, pos), u++)) return -EFAULT; count -= sizeof(*u); @@ -535,14 +535,14 @@ static int genregs_set(struct task_struct *target, int ret = 0; if (kbuf) { const unsigned long *k = kbuf; - while (count > 0 && !ret) { + while (count >= sizeof(*k) && !ret) { ret = putreg(target, pos, *k++); count -= sizeof(*k); pos += sizeof(*k); } } else { const unsigned long __user *u = ubuf; - while (count > 0 && !ret) { + while (count >= sizeof(*u) && !ret) { unsigned long word; ret = __get_user(word, u++); if (ret) @@ -1458,14 +1458,14 @@ static int genregs32_get(struct task_struct *target, { if (kbuf) { compat_ulong_t *k = kbuf; - while (count > 0) { + while (count >= sizeof(*k)) { getreg32(target, pos, k++); count -= sizeof(*k); pos += sizeof(*k); } } else { compat_ulong_t __user *u = ubuf; - while (count > 0) { + while (count >= sizeof(*u)) { compat_ulong_t word; getreg32(target, pos, &word); if (__put_user(word, u++)) @@ -1486,14 +1486,14 @@ static int genregs32_set(struct task_struct *target, int ret = 0; if (kbuf) { const compat_ulong_t *k = kbuf; - while (count > 0 && !ret) { + while (count >= sizeof(*k) && !ret) { ret = putreg32(target, pos, *k++); count -= sizeof(*k); pos += sizeof(*k); } } else { const compat_ulong_t __user *u = ubuf; - while (count > 0 && !ret) { + while (count >= sizeof(*u) && !ret) { compat_ulong_t word; ret = __get_user(word, u++); if (ret) -- GitLab From 331d9d5958277de27e6ce42247e1cbec54fd1c7e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 17 Dec 2009 14:15:09 +0100 Subject: [PATCH 334/618] Revert "fbdev: atafb - add palette register check" This reverts commit 8546e3ce6e37c359979b69862442f94e0ef0e03b, as it's a partial duplicate of commit 2f390380ca69e1617cdddb12d8da94f0a9f4319d ("fbdev: add palette register check to several drivers"). The former went in first through the m68k tree, the latter through Andrew Morton. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- drivers/video/atafb.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 2051c9dc813b..b7687c55fe16 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -2245,9 +2245,6 @@ static int ext_setcolreg(unsigned int regno, unsigned int red, if (regno > 255) return 1; - if (regno > 255) - return 1; - switch (external_card_type) { case IS_VGA: OUTB(0x3c8, regno); -- GitLab From 8ae1c9248042c5122f9628282f41c363c9610dd7 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 14 Dec 2009 14:20:23 -0800 Subject: [PATCH 335/618] spidev: use DECLARE_BITMAP instead of declaring the array [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Thadeu Lima de Souza Cascardo Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Grant Likely --- drivers/spi/spidev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index f8279e783617..cb7147e0a573 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -54,7 +54,7 @@ #define SPIDEV_MAJOR 153 /* assigned */ #define N_SPI_MINORS 32 /* ... up to 256 */ -static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG]; +static DECLARE_BITMAP(minors, N_SPI_MINORS); /* Bit masks for spi_device.mode management. Note that incorrect -- GitLab From db389b6143c895d23060179b14928f63d44285a2 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 14 Dec 2009 14:20:22 -0800 Subject: [PATCH 336/618] spidev: add proper section markers The driver already uses __devexit_p() in the structure, but looks like actual __dev{init,exit} markings were forgotten. The spidev_spi driver also needs renaming to include a "_driver" suffix to avoid section mismatch warnings. Signed-off-by: Mike Frysinger Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Grant Likely --- drivers/spi/spidev.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index cb7147e0a573..f4a7a287b7f1 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -561,7 +561,7 @@ static struct class *spidev_class; /*-------------------------------------------------------------------------*/ -static int spidev_probe(struct spi_device *spi) +static int __devinit spidev_probe(struct spi_device *spi) { struct spidev_data *spidev; int status; @@ -610,7 +610,7 @@ static int spidev_probe(struct spi_device *spi) return status; } -static int spidev_remove(struct spi_device *spi) +static int __devexit spidev_remove(struct spi_device *spi) { struct spidev_data *spidev = spi_get_drvdata(spi); @@ -632,7 +632,7 @@ static int spidev_remove(struct spi_device *spi) return 0; } -static struct spi_driver spidev_spi = { +static struct spi_driver spidev_spi_driver = { .driver = { .name = "spidev", .owner = THIS_MODULE, @@ -664,14 +664,14 @@ static int __init spidev_init(void) spidev_class = class_create(THIS_MODULE, "spidev"); if (IS_ERR(spidev_class)) { - unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); + unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name); return PTR_ERR(spidev_class); } - status = spi_register_driver(&spidev_spi); + status = spi_register_driver(&spidev_spi_driver); if (status < 0) { class_destroy(spidev_class); - unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); + unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name); } return status; } @@ -679,9 +679,9 @@ module_init(spidev_init); static void __exit spidev_exit(void) { - spi_unregister_driver(&spidev_spi); + spi_unregister_driver(&spidev_spi_driver); class_destroy(spidev_class); - unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); + unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name); } module_exit(spidev_exit); -- GitLab From e24c745272072fd2abe55209f1949b7b7ee602a7 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Mon, 14 Dec 2009 14:20:22 -0800 Subject: [PATCH 337/618] spi: controller driver for Designware SPI core Driver for the Designware SPI core, it supports multipul interfaces like PCI/APB etc. User can use "dw_apb_ssi_db.pdf" from Synopsys as HW datasheet. [randy.dunlap@oracle.com: fix build] [akpm@linux-foundation.org: build fix] Signed-off-by: Feng Tang Cc: David Brownell Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 10 + drivers/spi/Makefile | 2 + drivers/spi/dw_spi.c | 944 +++++++++++++++++++++++++++++++++++++ drivers/spi/dw_spi_pci.c | 169 +++++++ include/linux/spi/dw_spi.h | 212 +++++++++ 5 files changed, 1337 insertions(+) create mode 100644 drivers/spi/dw_spi.c create mode 100644 drivers/spi/dw_spi_pci.c create mode 100644 include/linux/spi/dw_spi.h diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 07e5453f7b18..d7c1741c4c5b 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -292,6 +292,16 @@ config SPI_NUC900 # Add new SPI master controllers in alphabetical order above this line # +config SPI_DESIGNWARE + bool "DesignWare SPI controller core support" + depends on SPI_MASTER + help + general driver for SPI controller core from DesignWare + +config SPI_DW_PCI + tristate "PCI interface driver for DW SPI core" + depends on SPI_DESIGNWARE && PCI + # # There are lots of SPI device types, with sensors and memory # being probably the most widely used ones. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index ed8c1675b52f..a909e39f7e7c 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -16,6 +16,8 @@ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_AU1550) += au1550_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o +obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o +obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o obj-$(CONFIG_SPI_GPIO) += spi_gpio.o obj-$(CONFIG_SPI_IMX) += spi_imx.o obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c new file mode 100644 index 000000000000..31620fae77be --- /dev/null +++ b/drivers/spi/dw_spi.c @@ -0,0 +1,944 @@ +/* + * dw_spi.c - Designware SPI core controller driver (refer pxa2xx_spi.c) + * + * Copyright (c) 2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include + +#include +#include + +#ifdef CONFIG_DEBUG_FS +#include +#endif + +#define START_STATE ((void *)0) +#define RUNNING_STATE ((void *)1) +#define DONE_STATE ((void *)2) +#define ERROR_STATE ((void *)-1) + +#define QUEUE_RUNNING 0 +#define QUEUE_STOPPED 1 + +#define MRST_SPI_DEASSERT 0 +#define MRST_SPI_ASSERT 1 + +/* Slave spi_dev related */ +struct chip_data { + u16 cr0; + u8 cs; /* chip select pin */ + u8 n_bytes; /* current is a 1/2/4 byte op */ + u8 tmode; /* TR/TO/RO/EEPROM */ + u8 type; /* SPI/SSP/MicroWire */ + + u8 poll_mode; /* 1 means use poll mode */ + + u32 dma_width; + u32 rx_threshold; + u32 tx_threshold; + u8 enable_dma; + u8 bits_per_word; + u16 clk_div; /* baud rate divider */ + u32 speed_hz; /* baud rate */ + int (*write)(struct dw_spi *dws); + int (*read)(struct dw_spi *dws); + void (*cs_control)(u32 command); +}; + +#ifdef CONFIG_DEBUG_FS +static int spi_show_regs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +#define SPI_REGS_BUFSIZE 1024 +static ssize_t spi_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct dw_spi *dws; + char *buf; + u32 len = 0; + ssize_t ret; + + dws = file->private_data; + + buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "MRST SPI0 registers:\n"); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "CTRL0: \t\t0x%08x\n", dw_readl(dws, ctrl0)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "CTRL1: \t\t0x%08x\n", dw_readl(dws, ctrl1)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SSIENR: \t0x%08x\n", dw_readl(dws, ssienr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SER: \t\t0x%08x\n", dw_readl(dws, ser)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "BAUDR: \t\t0x%08x\n", dw_readl(dws, baudr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "TXFTLR: \t0x%08x\n", dw_readl(dws, txfltr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "RXFTLR: \t0x%08x\n", dw_readl(dws, rxfltr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "TXFLR: \t\t0x%08x\n", dw_readl(dws, txflr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "RXFLR: \t\t0x%08x\n", dw_readl(dws, rxflr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SR: \t\t0x%08x\n", dw_readl(dws, sr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "IMR: \t\t0x%08x\n", dw_readl(dws, imr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "ISR: \t\t0x%08x\n", dw_readl(dws, isr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMACR: \t\t0x%08x\n", dw_readl(dws, dmacr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMATDLR: \t0x%08x\n", dw_readl(dws, dmatdlr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMARDLR: \t0x%08x\n", dw_readl(dws, dmardlr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "=================================\n"); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static const struct file_operations mrst_spi_regs_ops = { + .owner = THIS_MODULE, + .open = spi_show_regs_open, + .read = spi_show_regs, +}; + +static int mrst_spi_debugfs_init(struct dw_spi *dws) +{ + dws->debugfs = debugfs_create_dir("mrst_spi", NULL); + if (!dws->debugfs) + return -ENOMEM; + + debugfs_create_file("registers", S_IFREG | S_IRUGO, + dws->debugfs, (void *)dws, &mrst_spi_regs_ops); + return 0; +} + +static void mrst_spi_debugfs_remove(struct dw_spi *dws) +{ + if (dws->debugfs) + debugfs_remove_recursive(dws->debugfs); +} + +#else +static inline int mrst_spi_debugfs_init(struct dw_spi *dws) +{ +} + +static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static void wait_till_not_busy(struct dw_spi *dws) +{ + unsigned long end = jiffies + usecs_to_jiffies(1000); + + while (time_before(jiffies, end)) { + if (!(dw_readw(dws, sr) & SR_BUSY)) + return; + } + dev_err(&dws->master->dev, + "DW SPI: Stutus keeps busy for 1000us after a read/write!\n"); +} + +static void flush(struct dw_spi *dws) +{ + while (dw_readw(dws, sr) & SR_RF_NOT_EMPT) + dw_readw(dws, dr); + + wait_till_not_busy(dws); +} + +static void null_cs_control(u32 command) +{ +} + +static int null_writer(struct dw_spi *dws) +{ + u8 n_bytes = dws->n_bytes; + + if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) + || (dws->tx == dws->tx_end)) + return 0; + dw_writew(dws, dr, 0); + dws->tx += n_bytes; + + wait_till_not_busy(dws); + return 1; +} + +static int null_reader(struct dw_spi *dws) +{ + u8 n_bytes = dws->n_bytes; + + while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) + && (dws->rx < dws->rx_end)) { + dw_readw(dws, dr); + dws->rx += n_bytes; + } + wait_till_not_busy(dws); + return dws->rx == dws->rx_end; +} + +static int u8_writer(struct dw_spi *dws) +{ + if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) + || (dws->tx == dws->tx_end)) + return 0; + + dw_writew(dws, dr, *(u8 *)(dws->tx)); + ++dws->tx; + + wait_till_not_busy(dws); + return 1; +} + +static int u8_reader(struct dw_spi *dws) +{ + while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) + && (dws->rx < dws->rx_end)) { + *(u8 *)(dws->rx) = dw_readw(dws, dr); + ++dws->rx; + } + + wait_till_not_busy(dws); + return dws->rx == dws->rx_end; +} + +static int u16_writer(struct dw_spi *dws) +{ + if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) + || (dws->tx == dws->tx_end)) + return 0; + + dw_writew(dws, dr, *(u16 *)(dws->tx)); + dws->tx += 2; + + wait_till_not_busy(dws); + return 1; +} + +static int u16_reader(struct dw_spi *dws) +{ + u16 temp; + + while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) + && (dws->rx < dws->rx_end)) { + temp = dw_readw(dws, dr); + *(u16 *)(dws->rx) = temp; + dws->rx += 2; + } + + wait_till_not_busy(dws); + return dws->rx == dws->rx_end; +} + +static void *next_transfer(struct dw_spi *dws) +{ + struct spi_message *msg = dws->cur_msg; + struct spi_transfer *trans = dws->cur_transfer; + + /* Move to next transfer */ + if (trans->transfer_list.next != &msg->transfers) { + dws->cur_transfer = + list_entry(trans->transfer_list.next, + struct spi_transfer, + transfer_list); + return RUNNING_STATE; + } else + return DONE_STATE; +} + +/* + * Note: first step is the protocol driver prepares + * a dma-capable memory, and this func just need translate + * the virt addr to physical + */ +static int map_dma_buffers(struct dw_spi *dws) +{ + if (!dws->cur_msg->is_dma_mapped || !dws->dma_inited + || !dws->cur_chip->enable_dma) + return 0; + + if (dws->cur_transfer->tx_dma) + dws->tx_dma = dws->cur_transfer->tx_dma; + + if (dws->cur_transfer->rx_dma) + dws->rx_dma = dws->cur_transfer->rx_dma; + + return 1; +} + +/* Caller already set message->status; dma and pio irqs are blocked */ +static void giveback(struct dw_spi *dws) +{ + struct spi_transfer *last_transfer; + unsigned long flags; + struct spi_message *msg; + + spin_lock_irqsave(&dws->lock, flags); + msg = dws->cur_msg; + dws->cur_msg = NULL; + dws->cur_transfer = NULL; + dws->prev_chip = dws->cur_chip; + dws->cur_chip = NULL; + dws->dma_mapped = 0; + queue_work(dws->workqueue, &dws->pump_messages); + spin_unlock_irqrestore(&dws->lock, flags); + + last_transfer = list_entry(msg->transfers.prev, + struct spi_transfer, + transfer_list); + + if (!last_transfer->cs_change) + dws->cs_control(MRST_SPI_DEASSERT); + + msg->state = NULL; + if (msg->complete) + msg->complete(msg->context); +} + +static void int_error_stop(struct dw_spi *dws, const char *msg) +{ + /* Stop and reset hw */ + flush(dws); + spi_enable_chip(dws, 0); + + dev_err(&dws->master->dev, "%s\n", msg); + dws->cur_msg->state = ERROR_STATE; + tasklet_schedule(&dws->pump_transfers); +} + +static void transfer_complete(struct dw_spi *dws) +{ + /* Update total byte transfered return count actual bytes read */ + dws->cur_msg->actual_length += dws->len; + + /* Move to next transfer */ + dws->cur_msg->state = next_transfer(dws); + + /* Handle end of message */ + if (dws->cur_msg->state == DONE_STATE) { + dws->cur_msg->status = 0; + giveback(dws); + } else + tasklet_schedule(&dws->pump_transfers); +} + +static irqreturn_t interrupt_transfer(struct dw_spi *dws) +{ + u16 irq_status, irq_mask = 0x3f; + + irq_status = dw_readw(dws, isr) & irq_mask; + /* Error handling */ + if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) { + dw_readw(dws, txoicr); + dw_readw(dws, rxoicr); + dw_readw(dws, rxuicr); + int_error_stop(dws, "interrupt_transfer: fifo overrun"); + return IRQ_HANDLED; + } + + /* INT comes from tx */ + if (dws->tx && (irq_status & SPI_INT_TXEI)) { + while (dws->tx < dws->tx_end) + dws->write(dws); + + if (dws->tx == dws->tx_end) { + spi_mask_intr(dws, SPI_INT_TXEI); + transfer_complete(dws); + } + } + + /* INT comes from rx */ + if (dws->rx && (irq_status & SPI_INT_RXFI)) { + if (dws->read(dws)) + transfer_complete(dws); + } + return IRQ_HANDLED; +} + +static irqreturn_t dw_spi_irq(int irq, void *dev_id) +{ + struct dw_spi *dws = dev_id; + + if (!dws->cur_msg) { + spi_mask_intr(dws, SPI_INT_TXEI); + /* Never fail */ + return IRQ_HANDLED; + } + + return dws->transfer_handler(dws); +} + +/* Must be called inside pump_transfers() */ +static void poll_transfer(struct dw_spi *dws) +{ + if (dws->tx) { + while (dws->write(dws)) + dws->read(dws); + } + + dws->read(dws); + transfer_complete(dws); +} + +static void dma_transfer(struct dw_spi *dws, int cs_change) +{ +} + +static void pump_transfers(unsigned long data) +{ + struct dw_spi *dws = (struct dw_spi *)data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + struct spi_device *spi = NULL; + struct chip_data *chip = NULL; + u8 bits = 0; + u8 imask = 0; + u8 cs_change = 0; + u16 clk_div = 0; + u32 speed = 0; + u32 cr0 = 0; + + /* Get current state information */ + message = dws->cur_msg; + transfer = dws->cur_transfer; + chip = dws->cur_chip; + spi = message->spi; + + if (message->state == ERROR_STATE) { + message->status = -EIO; + goto early_exit; + } + + /* Handle end of message */ + if (message->state == DONE_STATE) { + message->status = 0; + goto early_exit; + } + + /* Delay if requested at end of transfer*/ + if (message->state == RUNNING_STATE) { + previous = list_entry(transfer->transfer_list.prev, + struct spi_transfer, + transfer_list); + if (previous->delay_usecs) + udelay(previous->delay_usecs); + } + + dws->n_bytes = chip->n_bytes; + dws->dma_width = chip->dma_width; + dws->cs_control = chip->cs_control; + + dws->rx_dma = transfer->rx_dma; + dws->tx_dma = transfer->tx_dma; + dws->tx = (void *)transfer->tx_buf; + dws->tx_end = dws->tx + transfer->len; + dws->rx = transfer->rx_buf; + dws->rx_end = dws->rx + transfer->len; + dws->write = dws->tx ? chip->write : null_writer; + dws->read = dws->rx ? chip->read : null_reader; + dws->cs_change = transfer->cs_change; + dws->len = dws->cur_transfer->len; + if (chip != dws->prev_chip) + cs_change = 1; + + cr0 = chip->cr0; + + /* Handle per transfer options for bpw and speed */ + if (transfer->speed_hz) { + speed = chip->speed_hz; + + if (transfer->speed_hz != speed) { + speed = transfer->speed_hz; + if (speed > dws->max_freq) { + printk(KERN_ERR "MRST SPI0: unsupported" + "freq: %dHz\n", speed); + message->status = -EIO; + goto early_exit; + } + + /* clk_div doesn't support odd number */ + clk_div = dws->max_freq / speed; + clk_div = (clk_div >> 1) << 1; + + chip->speed_hz = speed; + chip->clk_div = clk_div; + } + } + if (transfer->bits_per_word) { + bits = transfer->bits_per_word; + + switch (bits) { + case 8: + dws->n_bytes = 1; + dws->dma_width = 1; + dws->read = (dws->read != null_reader) ? + u8_reader : null_reader; + dws->write = (dws->write != null_writer) ? + u8_writer : null_writer; + break; + case 16: + dws->n_bytes = 2; + dws->dma_width = 2; + dws->read = (dws->read != null_reader) ? + u16_reader : null_reader; + dws->write = (dws->write != null_writer) ? + u16_writer : null_writer; + break; + default: + printk(KERN_ERR "MRST SPI0: unsupported bits:" + "%db\n", bits); + message->status = -EIO; + goto early_exit; + } + + cr0 = (bits - 1) + | (chip->type << SPI_FRF_OFFSET) + | (spi->mode << SPI_MODE_OFFSET) + | (chip->tmode << SPI_TMOD_OFFSET); + } + message->state = RUNNING_STATE; + + /* Check if current transfer is a DMA transaction */ + dws->dma_mapped = map_dma_buffers(dws); + + if (!dws->dma_mapped && !chip->poll_mode) { + if (dws->rx) + imask |= SPI_INT_RXFI; + if (dws->tx) + imask |= SPI_INT_TXEI; + dws->transfer_handler = interrupt_transfer; + } + + /* + * Reprogram registers only if + * 1. chip select changes + * 2. clk_div is changed + * 3. control value changes + */ + if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div) { + spi_enable_chip(dws, 0); + + if (dw_readw(dws, ctrl0) != cr0) + dw_writew(dws, ctrl0, cr0); + + /* Set the interrupt mask, for poll mode just diable all int */ + spi_mask_intr(dws, 0xff); + if (!chip->poll_mode) + spi_umask_intr(dws, imask); + + spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); + spi_chip_sel(dws, spi->chip_select); + spi_enable_chip(dws, 1); + + if (cs_change) + dws->prev_chip = chip; + } + + if (dws->dma_mapped) + dma_transfer(dws, cs_change); + + if (chip->poll_mode) + poll_transfer(dws); + + return; + +early_exit: + giveback(dws); + return; +} + +static void pump_messages(struct work_struct *work) +{ + struct dw_spi *dws = + container_of(work, struct dw_spi, pump_messages); + unsigned long flags; + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&dws->lock, flags); + if (list_empty(&dws->queue) || dws->run == QUEUE_STOPPED) { + dws->busy = 0; + spin_unlock_irqrestore(&dws->lock, flags); + return; + } + + /* Make sure we are not already running a message */ + if (dws->cur_msg) { + spin_unlock_irqrestore(&dws->lock, flags); + return; + } + + /* Extract head of queue */ + dws->cur_msg = list_entry(dws->queue.next, struct spi_message, queue); + list_del_init(&dws->cur_msg->queue); + + /* Initial message state*/ + dws->cur_msg->state = START_STATE; + dws->cur_transfer = list_entry(dws->cur_msg->transfers.next, + struct spi_transfer, + transfer_list); + dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi); + + /* Mark as busy and launch transfers */ + tasklet_schedule(&dws->pump_transfers); + + dws->busy = 1; + spin_unlock_irqrestore(&dws->lock, flags); +} + +/* spi_device use this to queue in their spi_msg */ +static int dw_spi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct dw_spi *dws = spi_master_get_devdata(spi->master); + unsigned long flags; + + spin_lock_irqsave(&dws->lock, flags); + + if (dws->run == QUEUE_STOPPED) { + spin_unlock_irqrestore(&dws->lock, flags); + return -ESHUTDOWN; + } + + msg->actual_length = 0; + msg->status = -EINPROGRESS; + msg->state = START_STATE; + + list_add_tail(&msg->queue, &dws->queue); + + if (dws->run == QUEUE_RUNNING && !dws->busy) { + + if (dws->cur_transfer || dws->cur_msg) + queue_work(dws->workqueue, + &dws->pump_messages); + else { + /* If no other data transaction in air, just go */ + spin_unlock_irqrestore(&dws->lock, flags); + pump_messages(&dws->pump_messages); + return 0; + } + } + + spin_unlock_irqrestore(&dws->lock, flags); + return 0; +} + +/* This may be called twice for each spi dev */ +static int dw_spi_setup(struct spi_device *spi) +{ + struct dw_spi_chip *chip_info = NULL; + struct chip_data *chip; + + if (spi->bits_per_word != 8 && spi->bits_per_word != 16) + return -EINVAL; + + /* Only alloc on first setup */ + chip = spi_get_ctldata(spi); + if (!chip) { + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->cs_control = null_cs_control; + chip->enable_dma = 0; + } + + /* + * Protocol drivers may change the chip settings, so... + * if chip_info exists, use it + */ + chip_info = spi->controller_data; + + /* chip_info doesn't always exist */ + if (chip_info) { + if (chip_info->cs_control) + chip->cs_control = chip_info->cs_control; + + chip->poll_mode = chip_info->poll_mode; + chip->type = chip_info->type; + + chip->rx_threshold = 0; + chip->tx_threshold = 0; + + chip->enable_dma = chip_info->enable_dma; + } + + if (spi->bits_per_word <= 8) { + chip->n_bytes = 1; + chip->dma_width = 1; + chip->read = u8_reader; + chip->write = u8_writer; + } else if (spi->bits_per_word <= 16) { + chip->n_bytes = 2; + chip->dma_width = 2; + chip->read = u16_reader; + chip->write = u16_writer; + } else { + /* Never take >16b case for MRST SPIC */ + dev_err(&spi->dev, "invalid wordsize\n"); + return -EINVAL; + } + chip->bits_per_word = spi->bits_per_word; + + chip->speed_hz = spi->max_speed_hz; + if (chip->speed_hz) + chip->clk_div = 25000000 / chip->speed_hz; + else + chip->clk_div = 8; /* default value */ + + chip->tmode = 0; /* Tx & Rx */ + /* Default SPI mode is SCPOL = 0, SCPH = 0 */ + chip->cr0 = (chip->bits_per_word - 1) + | (chip->type << SPI_FRF_OFFSET) + | (spi->mode << SPI_MODE_OFFSET) + | (chip->tmode << SPI_TMOD_OFFSET); + + spi_set_ctldata(spi, chip); + return 0; +} + +static void dw_spi_cleanup(struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata(spi); + kfree(chip); +} + +static int __init init_queue(struct dw_spi *dws) +{ + INIT_LIST_HEAD(&dws->queue); + spin_lock_init(&dws->lock); + + dws->run = QUEUE_STOPPED; + dws->busy = 0; + + tasklet_init(&dws->pump_transfers, + pump_transfers, (unsigned long)dws); + + INIT_WORK(&dws->pump_messages, pump_messages); + dws->workqueue = create_singlethread_workqueue( + dev_name(dws->master->dev.parent)); + if (dws->workqueue == NULL) + return -EBUSY; + + return 0; +} + +static int start_queue(struct dw_spi *dws) +{ + unsigned long flags; + + spin_lock_irqsave(&dws->lock, flags); + + if (dws->run == QUEUE_RUNNING || dws->busy) { + spin_unlock_irqrestore(&dws->lock, flags); + return -EBUSY; + } + + dws->run = QUEUE_RUNNING; + dws->cur_msg = NULL; + dws->cur_transfer = NULL; + dws->cur_chip = NULL; + dws->prev_chip = NULL; + spin_unlock_irqrestore(&dws->lock, flags); + + queue_work(dws->workqueue, &dws->pump_messages); + + return 0; +} + +static int stop_queue(struct dw_spi *dws) +{ + unsigned long flags; + unsigned limit = 50; + int status = 0; + + spin_lock_irqsave(&dws->lock, flags); + dws->run = QUEUE_STOPPED; + while (!list_empty(&dws->queue) && dws->busy && limit--) { + spin_unlock_irqrestore(&dws->lock, flags); + msleep(10); + spin_lock_irqsave(&dws->lock, flags); + } + + if (!list_empty(&dws->queue) || dws->busy) + status = -EBUSY; + spin_unlock_irqrestore(&dws->lock, flags); + + return status; +} + +static int destroy_queue(struct dw_spi *dws) +{ + int status; + + status = stop_queue(dws); + if (status != 0) + return status; + destroy_workqueue(dws->workqueue); + return 0; +} + +/* Restart the controller, disable all interrupts, clean rx fifo */ +static void spi_hw_init(struct dw_spi *dws) +{ + spi_enable_chip(dws, 0); + spi_mask_intr(dws, 0xff); + spi_enable_chip(dws, 1); + flush(dws); +} + +int __devinit dw_spi_add_host(struct dw_spi *dws) +{ + struct spi_master *master; + int ret; + + BUG_ON(dws == NULL); + + master = spi_alloc_master(dws->parent_dev, 0); + if (!master) { + ret = -ENOMEM; + goto exit; + } + + dws->master = master; + dws->type = SSI_MOTO_SPI; + dws->prev_chip = NULL; + dws->dma_inited = 0; + dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60); + + ret = request_irq(dws->irq, dw_spi_irq, 0, + "dw_spi", dws); + if (ret < 0) { + dev_err(&master->dev, "can not get IRQ\n"); + goto err_free_master; + } + + master->mode_bits = SPI_CPOL | SPI_CPHA; + master->bus_num = dws->bus_num; + master->num_chipselect = dws->num_cs; + master->cleanup = dw_spi_cleanup; + master->setup = dw_spi_setup; + master->transfer = dw_spi_transfer; + + dws->dma_inited = 0; + + /* Basic HW init */ + spi_hw_init(dws); + + /* Initial and start queue */ + ret = init_queue(dws); + if (ret) { + dev_err(&master->dev, "problem initializing queue\n"); + goto err_diable_hw; + } + ret = start_queue(dws); + if (ret) { + dev_err(&master->dev, "problem starting queue\n"); + goto err_diable_hw; + } + + spi_master_set_devdata(master, dws); + ret = spi_register_master(master); + if (ret) { + dev_err(&master->dev, "problem registering spi master\n"); + goto err_queue_alloc; + } + + mrst_spi_debugfs_init(dws); + return 0; + +err_queue_alloc: + destroy_queue(dws); +err_diable_hw: + spi_enable_chip(dws, 0); + free_irq(dws->irq, dws); +err_free_master: + spi_master_put(master); +exit: + return ret; +} +EXPORT_SYMBOL(dw_spi_add_host); + +void __devexit dw_spi_remove_host(struct dw_spi *dws) +{ + int status = 0; + + if (!dws) + return; + mrst_spi_debugfs_remove(dws); + + /* Remove the queue */ + status = destroy_queue(dws); + if (status != 0) + dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not " + "complete, message memory not freed\n"); + + spi_enable_chip(dws, 0); + /* Disable clk */ + spi_set_clk(dws, 0); + free_irq(dws->irq, dws); + + /* Disconnect from the SPI framework */ + spi_unregister_master(dws->master); +} + +int dw_spi_suspend_host(struct dw_spi *dws) +{ + int ret = 0; + + ret = stop_queue(dws); + if (ret) + return ret; + spi_enable_chip(dws, 0); + spi_set_clk(dws, 0); + return ret; +} +EXPORT_SYMBOL(dw_spi_suspend_host); + +int dw_spi_resume_host(struct dw_spi *dws) +{ + int ret; + + spi_hw_init(dws); + ret = start_queue(dws); + if (ret) + dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret); + return ret; +} +EXPORT_SYMBOL(dw_spi_resume_host); + +MODULE_AUTHOR("Feng Tang "); +MODULE_DESCRIPTION("Driver for DesignWare SPI controller core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c new file mode 100644 index 000000000000..34ba69161734 --- /dev/null +++ b/drivers/spi/dw_spi_pci.c @@ -0,0 +1,169 @@ +/* + * mrst_spi_pci.c - PCI interface driver for DW SPI Core + * + * Copyright (c) 2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, + * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include + +#define DRIVER_NAME "dw_spi_pci" + +struct dw_spi_pci { + struct pci_dev *pdev; + struct dw_spi dws; +}; + +static int __devinit spi_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct dw_spi_pci *dwpci; + struct dw_spi *dws; + int pci_bar = 0; + int ret; + + printk(KERN_INFO "DW: found PCI SPI controller(ID: %04x:%04x)\n", + pdev->vendor, pdev->device); + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + dwpci = kzalloc(sizeof(struct dw_spi_pci), GFP_KERNEL); + if (!dwpci) { + ret = -ENOMEM; + goto err_disable; + } + + dwpci->pdev = pdev; + dws = &dwpci->dws; + + /* Get basic io resource and map it */ + dws->paddr = pci_resource_start(pdev, pci_bar); + dws->iolen = pci_resource_len(pdev, pci_bar); + + ret = pci_request_region(pdev, pci_bar, dev_name(&pdev->dev)); + if (ret) + goto err_kfree; + + dws->regs = ioremap_nocache((unsigned long)dws->paddr, + pci_resource_len(pdev, pci_bar)); + if (!dws->regs) { + ret = -ENOMEM; + goto err_release_reg; + } + + dws->parent_dev = &pdev->dev; + dws->bus_num = 0; + dws->num_cs = 4; + dws->max_freq = 25000000; /* for Moorestwon */ + dws->irq = pdev->irq; + + ret = dw_spi_add_host(dws); + if (ret) + goto err_unmap; + + /* PCI hook and SPI hook use the same drv data */ + pci_set_drvdata(pdev, dwpci); + return 0; + +err_unmap: + iounmap(dws->regs); +err_release_reg: + pci_release_region(pdev, pci_bar); +err_kfree: + kfree(dwpci); +err_disable: + pci_disable_device(pdev); + return ret; +} + +static void __devexit spi_pci_remove(struct pci_dev *pdev) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + + pci_set_drvdata(pdev, NULL); + iounmap(dwpci->dws.regs); + pci_release_region(pdev, 0); + kfree(dwpci); + pci_disable_device(pdev); +} + +#ifdef CONFIG_PM +static int spi_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + int ret; + + ret = dw_spi_suspend_host(&dwpci->dws); + if (ret) + return ret; + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return ret; +} + +static int spi_resume(struct pci_dev *pdev) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + int ret; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + ret = pci_enable_device(pdev); + if (ret) + return ret; + return dw_spi_resume_host(&dwpci->dws); +} +#else +#define spi_suspend NULL +#define spi_resume NULL +#endif + +static const struct pci_device_id pci_ids[] __devinitdata = { + /* Intel Moorestown platform SPI controller 0 */ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) }, + {}, +}; + +static struct pci_driver dw_spi_driver = { + .name = DRIVER_NAME, + .id_table = pci_ids, + .probe = spi_pci_probe, + .remove = __devexit_p(spi_pci_remove), + .suspend = spi_suspend, + .resume = spi_resume, +}; + +static int __init mrst_spi_init(void) +{ + return pci_register_driver(&dw_spi_driver); +} + +static void __exit mrst_spi_exit(void) +{ + pci_unregister_driver(&dw_spi_driver); +} + +module_init(mrst_spi_init); +module_exit(mrst_spi_exit); + +MODULE_AUTHOR("Feng Tang "); +MODULE_DESCRIPTION("PCI interface driver for DW SPI Core"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h new file mode 100644 index 000000000000..51b3e771a9a3 --- /dev/null +++ b/include/linux/spi/dw_spi.h @@ -0,0 +1,212 @@ +#ifndef DW_SPI_HEADER_H +#define DW_SPI_HEADER_H +#include + +/* Bit fields in CTRLR0 */ +#define SPI_DFS_OFFSET 0 + +#define SPI_FRF_OFFSET 4 +#define SPI_FRF_SPI 0x0 +#define SPI_FRF_SSP 0x1 +#define SPI_FRF_MICROWIRE 0x2 +#define SPI_FRF_RESV 0x3 + +#define SPI_MODE_OFFSET 6 +#define SPI_SCPH_OFFSET 6 +#define SPI_SCOL_OFFSET 7 +#define SPI_TMOD_OFFSET 8 +#define SPI_TMOD_TR 0x0 /* xmit & recv */ +#define SPI_TMOD_TO 0x1 /* xmit only */ +#define SPI_TMOD_RO 0x2 /* recv only */ +#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ + +#define SPI_SLVOE_OFFSET 10 +#define SPI_SRL_OFFSET 11 +#define SPI_CFS_OFFSET 12 + +/* Bit fields in SR, 7 bits */ +#define SR_MASK 0x7f /* cover 7 bits */ +#define SR_BUSY (1 << 0) +#define SR_TF_NOT_FULL (1 << 1) +#define SR_TF_EMPT (1 << 2) +#define SR_RF_NOT_EMPT (1 << 3) +#define SR_RF_FULL (1 << 4) +#define SR_TX_ERR (1 << 5) +#define SR_DCOL (1 << 6) + +/* Bit fields in ISR, IMR, RISR, 7 bits */ +#define SPI_INT_TXEI (1 << 0) +#define SPI_INT_TXOI (1 << 1) +#define SPI_INT_RXUI (1 << 2) +#define SPI_INT_RXOI (1 << 3) +#define SPI_INT_RXFI (1 << 4) +#define SPI_INT_MSTI (1 << 5) + +/* TX RX interrupt level threshhold, max can be 256 */ +#define SPI_INT_THRESHOLD 32 + +enum dw_ssi_type { + SSI_MOTO_SPI = 0, + SSI_TI_SSP, + SSI_NS_MICROWIRE, +}; + +struct dw_spi_reg { + u32 ctrl0; + u32 ctrl1; + u32 ssienr; + u32 mwcr; + u32 ser; + u32 baudr; + u32 txfltr; + u32 rxfltr; + u32 txflr; + u32 rxflr; + u32 sr; + u32 imr; + u32 isr; + u32 risr; + u32 txoicr; + u32 rxoicr; + u32 rxuicr; + u32 msticr; + u32 icr; + u32 dmacr; + u32 dmatdlr; + u32 dmardlr; + u32 idr; + u32 version; + u32 dr; /* Currently oper as 32 bits, + though only low 16 bits matters */ +} __packed; + +struct dw_spi { + struct spi_master *master; + struct spi_device *cur_dev; + struct device *parent_dev; + enum dw_ssi_type type; + + void __iomem *regs; + unsigned long paddr; + u32 iolen; + int irq; + u32 max_freq; /* max bus freq supported */ + + u16 bus_num; + u16 num_cs; /* supported slave numbers */ + + /* Driver message queue */ + struct workqueue_struct *workqueue; + struct work_struct pump_messages; + spinlock_t lock; + struct list_head queue; + int busy; + int run; + + /* Message Transfer pump */ + struct tasklet_struct pump_transfers; + + /* Current message transfer state info */ + struct spi_message *cur_msg; + struct spi_transfer *cur_transfer; + struct chip_data *cur_chip; + struct chip_data *prev_chip; + size_t len; + void *tx; + void *tx_end; + void *rx; + void *rx_end; + int dma_mapped; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + size_t rx_map_len; + size_t tx_map_len; + u8 n_bytes; /* current is a 1/2 bytes op */ + u8 max_bits_per_word; /* maxim is 16b */ + u32 dma_width; + int cs_change; + int (*write)(struct dw_spi *dws); + int (*read)(struct dw_spi *dws); + irqreturn_t (*transfer_handler)(struct dw_spi *dws); + void (*cs_control)(u32 command); + + /* Dma info */ + int dma_inited; + struct dma_chan *txchan; + struct dma_chan *rxchan; + int txdma_done; + int rxdma_done; + u64 tx_param; + u64 rx_param; + struct device *dma_dev; + dma_addr_t dma_addr; + + /* Bus interface info */ + void *priv; +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs; +#endif +}; + +#define dw_readl(dw, name) \ + __raw_readl(&(((struct dw_spi_reg *)dw->regs)->name)) +#define dw_writel(dw, name, val) \ + __raw_writel((val), &(((struct dw_spi_reg *)dw->regs)->name)) +#define dw_readw(dw, name) \ + __raw_readw(&(((struct dw_spi_reg *)dw->regs)->name)) +#define dw_writew(dw, name, val) \ + __raw_writew((val), &(((struct dw_spi_reg *)dw->regs)->name)) + +static inline void spi_enable_chip(struct dw_spi *dws, int enable) +{ + dw_writel(dws, ssienr, (enable ? 1 : 0)); +} + +static inline void spi_set_clk(struct dw_spi *dws, u16 div) +{ + dw_writel(dws, baudr, div); +} + +static inline void spi_chip_sel(struct dw_spi *dws, u16 cs) +{ + if (cs > dws->num_cs) + return; + dw_writel(dws, ser, 1 << cs); +} + +/* Disable IRQ bits */ +static inline void spi_mask_intr(struct dw_spi *dws, u32 mask) +{ + u32 new_mask; + + new_mask = dw_readl(dws, imr) & ~mask; + dw_writel(dws, imr, new_mask); +} + +/* Enable IRQ bits */ +static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) +{ + u32 new_mask; + + new_mask = dw_readl(dws, imr) | mask; + dw_writel(dws, imr, new_mask); +} + +/* + * Each SPI slave device to work with dw_api controller should + * has such a structure claiming its working mode (PIO/DMA etc), + * which can be save in the "controller_data" member of the + * struct spi_device + */ +struct dw_spi_chip { + u8 poll_mode; /* 0 for contoller polling mode */ + u8 type; /* SPI/SSP/Micrwire */ + u8 enable_dma; + void (*cs_control)(u32 command); +}; + +extern int dw_spi_add_host(struct dw_spi *dws); +extern void dw_spi_remove_host(struct dw_spi *dws); +extern int dw_spi_suspend_host(struct dw_spi *dws); +extern int dw_spi_resume_host(struct dw_spi *dws); +#endif /* DW_SPI_HEADER_H */ -- GitLab From b9aff027b2c1d6019d237382c78fd396f9de2ea5 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 20 Nov 2009 14:28:35 -0800 Subject: [PATCH 338/618] fs: anon_inodes implement dname Add a d_dname method for anon_inodes filesystem, the same way pipefs and sockfs pseudo filesystems. This allows us to remove the DCACHE_UNHASHED hack from anon_inodes.c (see next patch). [AV: inumber is useless here, dropped from anon_inodefs_dname()] Signed-off-by: Nick Piggin Cc: Miklos Szeredi Cc: Davide Libenzi Cc: "David S. Miller" Cc: Jens Axboe Cc: Christoph Hellwig Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Al Viro --- fs/anon_inodes.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c index 94f5110c4655..01c529a3f7d2 100644 --- a/fs/anon_inodes.c +++ b/fs/anon_inodes.c @@ -45,6 +45,15 @@ static int anon_inodefs_delete_dentry(struct dentry *dentry) return 1; } +/* + * anon_inodefs_dname() is called from d_path(). + */ +static char *anon_inodefs_dname(struct dentry *dentry, char *buffer, int buflen) +{ + return dynamic_dname(dentry, buffer, buflen, "anon_inode:%s", + dentry->d_name.name); +} + static struct file_system_type anon_inode_fs_type = { .name = "anon_inodefs", .get_sb = anon_inodefs_get_sb, @@ -52,6 +61,7 @@ static struct file_system_type anon_inode_fs_type = { }; static const struct dentry_operations anon_inodefs_dentry_operations = { .d_delete = anon_inodefs_delete_dentry, + .d_dname = anon_inodefs_dname, }; /* -- GitLab From a3a065e3f13da8a3470ed09c7f38aad256083726 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 18 Nov 2009 05:30:19 +0100 Subject: [PATCH 339/618] fs: no games with DCACHE_UNHASHED Filesystems outside the regular namespace do not have to clear DCACHE_UNHASHED in order to have a working /proc/$pid/fd/XXX. Nothing in proc prevents the fd link from being used if its dentry is not in the hash. Also, it does not get put into the dcache hash if DCACHE_UNHASHED is clear; that depends on the filesystem calling d_add or d_rehash. So delete the misleading comments and needless code. Acked-by: Miklos Szeredi Signed-off-by: Nick Piggin Signed-off-by: Al Viro --- fs/anon_inodes.c | 13 ------------- fs/pipe.c | 18 ------------------ net/socket.c | 19 ------------------- 3 files changed, 50 deletions(-) diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c index 01c529a3f7d2..2c994591f4d7 100644 --- a/fs/anon_inodes.c +++ b/fs/anon_inodes.c @@ -35,16 +35,6 @@ static int anon_inodefs_get_sb(struct file_system_type *fs_type, int flags, mnt); } -static int anon_inodefs_delete_dentry(struct dentry *dentry) -{ - /* - * We faked vfs to believe the dentry was hashed when we created it. - * Now we restore the flag so that dput() will work correctly. - */ - dentry->d_flags |= DCACHE_UNHASHED; - return 1; -} - /* * anon_inodefs_dname() is called from d_path(). */ @@ -60,7 +50,6 @@ static struct file_system_type anon_inode_fs_type = { .kill_sb = kill_anon_super, }; static const struct dentry_operations anon_inodefs_dentry_operations = { - .d_delete = anon_inodefs_delete_dentry, .d_dname = anon_inodefs_dname, }; @@ -129,8 +118,6 @@ struct file *anon_inode_getfile(const char *name, atomic_inc(&anon_inode_inode->i_count); path.dentry->d_op = &anon_inodefs_dentry_operations; - /* Do not publish this dentry inside the global dentry hash table */ - path.dentry->d_flags &= ~DCACHE_UNHASHED; d_instantiate(path.dentry, anon_inode_inode); error = -ENFILE; diff --git a/fs/pipe.c b/fs/pipe.c index 43d79da5c57e..37ba29ff3158 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -906,17 +906,6 @@ void free_pipe_info(struct inode *inode) } static struct vfsmount *pipe_mnt __read_mostly; -static int pipefs_delete_dentry(struct dentry *dentry) -{ - /* - * At creation time, we pretended this dentry was hashed - * (by clearing DCACHE_UNHASHED bit in d_flags) - * At delete time, we restore the truth : not hashed. - * (so that dput() can proceed correctly) - */ - dentry->d_flags |= DCACHE_UNHASHED; - return 0; -} /* * pipefs_dname() is called from d_path(). @@ -928,7 +917,6 @@ static char *pipefs_dname(struct dentry *dentry, char *buffer, int buflen) } static const struct dentry_operations pipefs_dentry_operations = { - .d_delete = pipefs_delete_dentry, .d_dname = pipefs_dname, }; @@ -989,12 +977,6 @@ struct file *create_write_pipe(int flags) path.mnt = mntget(pipe_mnt); path.dentry->d_op = &pipefs_dentry_operations; - /* - * We dont want to publish this dentry into global dentry hash table. - * We pretend dentry is already hashed, by unsetting DCACHE_UNHASHED - * This permits a working /proc/$pid/fd/XXX on pipes - */ - path.dentry->d_flags &= ~DCACHE_UNHASHED; d_instantiate(path.dentry, inode); err = -ENFILE; diff --git a/net/socket.c b/net/socket.c index dbfdfa96d29b..769c386bd428 100644 --- a/net/socket.c +++ b/net/socket.c @@ -312,18 +312,6 @@ static struct file_system_type sock_fs_type = { .kill_sb = kill_anon_super, }; -static int sockfs_delete_dentry(struct dentry *dentry) -{ - /* - * At creation time, we pretended this dentry was hashed - * (by clearing DCACHE_UNHASHED bit in d_flags) - * At delete time, we restore the truth : not hashed. - * (so that dput() can proceed correctly) - */ - dentry->d_flags |= DCACHE_UNHASHED; - return 0; -} - /* * sockfs_dname() is called from d_path(). */ @@ -334,7 +322,6 @@ static char *sockfs_dname(struct dentry *dentry, char *buffer, int buflen) } static const struct dentry_operations sockfs_dentry_operations = { - .d_delete = sockfs_delete_dentry, .d_dname = sockfs_dname, }; @@ -374,12 +361,6 @@ static int sock_alloc_file(struct socket *sock, struct file **f, int flags) path.mnt = mntget(sock_mnt); path.dentry->d_op = &sockfs_dentry_operations; - /* - * We dont want to push this dentry into global dentry hash table. - * We pretend dentry is already hashed, by unsetting DCACHE_UNHASHED - * This permits a working /proc/$pid/fd/XXX on sockets - */ - path.dentry->d_flags &= ~DCACHE_UNHASHED; d_instantiate(path.dentry, SOCK_INODE(sock)); SOCK_INODE(sock)->i_fop = &socket_file_ops; -- GitLab From cb59861f03a626196a23fdef5e20ddbb8cca6466 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 16 Nov 2009 12:05:20 -0800 Subject: [PATCH 340/618] vfs: remove extraneous NULL d_inode check from do_filp_open We can't get to this point unless it's a valid pointer. Signed-off-by: Jeff Layton Cc: Al Viro Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Al Viro --- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index d2783c8a770b..dad4b80257db 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1764,7 +1764,7 @@ struct file *do_filp_open(int dfd, const char *pathname, path_to_nameidata(&path, &nd); error = -EISDIR; - if (path.dentry->d_inode && S_ISDIR(path.dentry->d_inode->i_mode)) + if (S_ISDIR(path.dentry->d_inode->i_mode)) goto exit; ok: /* -- GitLab From bec0806cfec6ded1a7e097bb95279e521a796129 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 14 Dec 2009 22:20:24 -0800 Subject: [PATCH 341/618] spi_s3c24xx: add FIQ pseudo-DMA support Add pseudo-DMA by FIQ to the S3C24XX SPI driver. This allows the driver to get DMA-like performance where there are either no free DMA channels or when doing transfers that required both TX and RX data paths. Since this patch requires the addition of an assembly file to hold the FIQ code, we rename the module (instead of adding a rename of the .c file to this patch). We expect most users are loading this via udev and thus there should be no change to the userland configuration. Signed-off-by: Ben Dooks Signed-off-by: Simtec Linux Team Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Grant Likely --- arch/arm/mach-s3c2410/include/mach/spi.h | 2 + drivers/spi/Kconfig | 11 + drivers/spi/Makefile | 7 +- drivers/spi/spi_s3c24xx.c | 244 +++++++++++++++++++++-- drivers/spi/spi_s3c24xx_fiq.S | 116 +++++++++++ drivers/spi/spi_s3c24xx_fiq.h | 26 +++ 6 files changed, 392 insertions(+), 14 deletions(-) create mode 100644 drivers/spi/spi_s3c24xx_fiq.S create mode 100644 drivers/spi/spi_s3c24xx_fiq.h diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h index 193b39d654ed..4d9588373aa5 100644 --- a/arch/arm/mach-s3c2410/include/mach/spi.h +++ b/arch/arm/mach-s3c2410/include/mach/spi.h @@ -18,6 +18,8 @@ struct s3c2410_spi_info { unsigned int num_cs; /* total chipselects */ int bus_num; /* bus number to use. */ + unsigned int use_fiq:1; /* use fiq */ + void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable); void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d7c1741c4c5b..6fa595e0c989 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -219,6 +219,17 @@ config SPI_S3C24XX help SPI driver for Samsung S3C24XX series ARM SoCs +config SPI_S3C24XX_FIQ + bool "S3C24XX driver with FIQ pseudo-DMA" + depends on SPI_S3C24XX + select FIQ + help + Enable FIQ support for the S3C24XX SPI driver to provide pseudo + DMA by using the fast-interrupt request framework, This allows + the driver to get DMA-like performance when there are either + no free DMA channels, or when doing transfers that required both + TX and RX data paths. + config SPI_S3C24XX_GPIO tristate "Samsung S3C24XX series SPI by GPIO" depends on ARCH_S3C2410 && EXPERIMENTAL diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index a909e39f7e7c..33faa7fa0ab8 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -32,7 +32,7 @@ obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o -obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o +obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o obj-$(CONFIG_SPI_TXX9) += spi_txx9.o obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o @@ -41,6 +41,11 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o + +# special build for s3c24xx spi driver with fiq support +spi_s3c24xx_hw-y := spi_s3c24xx.o +spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o + # ... add above this line ... # SPI protocol drivers (device/link on bus) diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 33d94f76b9ef..4b0d25b497ac 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -1,7 +1,7 @@ /* linux/drivers/spi/spi_s3c24xx.c * * Copyright (c) 2006 Ben Dooks - * Copyright (c) 2006 Simtec Electronics + * Copyright 2006-2009 Simtec Electronics * Ben Dooks * * This program is free software; you can redistribute it and/or modify @@ -28,6 +28,11 @@ #include #include +#include +#include + +#include "spi_s3c24xx_fiq.h" + /** * s3c24xx_spi_devstate - per device data * @hz: Last frequency calculated for @sppre field. @@ -42,6 +47,13 @@ struct s3c24xx_spi_devstate { u8 sppre; }; +enum spi_fiq_mode { + FIQ_MODE_NONE = 0, + FIQ_MODE_TX = 1, + FIQ_MODE_RX = 2, + FIQ_MODE_TXRX = 3, +}; + struct s3c24xx_spi { /* bitbang has to be first */ struct spi_bitbang bitbang; @@ -52,6 +64,11 @@ struct s3c24xx_spi { int len; int count; + struct fiq_handler fiq_handler; + enum spi_fiq_mode fiq_mode; + unsigned char fiq_inuse; + unsigned char fiq_claimed; + void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); @@ -67,6 +84,7 @@ struct s3c24xx_spi { struct s3c2410_spi_info *pdata; }; + #define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT) #define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP) @@ -127,7 +145,7 @@ static int s3c24xx_spi_update_state(struct spi_device *spi, } if (spi->mode != cs->mode) { - u8 spcon = SPCON_DEFAULT; + u8 spcon = SPCON_DEFAULT | S3C2410_SPCON_ENSCK; if (spi->mode & SPI_CPHA) spcon |= S3C2410_SPCON_CPHA_FMTB; @@ -214,13 +232,196 @@ static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count) return hw->tx ? hw->tx[count] : 0; } +#ifdef CONFIG_SPI_S3C24XX_FIQ +/* Support for FIQ based pseudo-DMA to improve the transfer speed. + * + * This code uses the assembly helper in spi_s3c24xx_spi.S which is + * used by the FIQ core to move data between main memory and the peripheral + * block. Since this is code running on the processor, there is no problem + * with cache coherency of the buffers, so we can use any buffer we like. + */ + +/** + * struct spi_fiq_code - FIQ code and header + * @length: The length of the code fragment, excluding this header. + * @ack_offset: The offset from @data to the word to place the IRQ ACK bit at. + * @data: The code itself to install as a FIQ handler. + */ +struct spi_fiq_code { + u32 length; + u32 ack_offset; + u8 data[0]; +}; + +extern struct spi_fiq_code s3c24xx_spi_fiq_txrx; +extern struct spi_fiq_code s3c24xx_spi_fiq_tx; +extern struct spi_fiq_code s3c24xx_spi_fiq_rx; + +/** + * ack_bit - turn IRQ into IRQ acknowledgement bit + * @irq: The interrupt number + * + * Returns the bit to write to the interrupt acknowledge register. + */ +static inline u32 ack_bit(unsigned int irq) +{ + return 1 << (irq - IRQ_EINT0); +} + +/** + * s3c24xx_spi_tryfiq - attempt to claim and setup FIQ for transfer + * @hw: The hardware state. + * + * Claim the FIQ handler (only one can be active at any one time) and + * then setup the correct transfer code for this transfer. + * + * This call updates all the necessary state information if sucessful, + * so the caller does not need to do anything more than start the transfer + * as normal, since the IRQ will have been re-routed to the FIQ handler. +*/ +void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw) +{ + struct pt_regs regs; + enum spi_fiq_mode mode; + struct spi_fiq_code *code; + int ret; + + if (!hw->fiq_claimed) { + /* try and claim fiq if we haven't got it, and if not + * then return and simply use another transfer method */ + + ret = claim_fiq(&hw->fiq_handler); + if (ret) + return; + } + + if (hw->tx && !hw->rx) + mode = FIQ_MODE_TX; + else if (hw->rx && !hw->tx) + mode = FIQ_MODE_RX; + else + mode = FIQ_MODE_TXRX; + + regs.uregs[fiq_rspi] = (long)hw->regs; + regs.uregs[fiq_rrx] = (long)hw->rx; + regs.uregs[fiq_rtx] = (long)hw->tx + 1; + regs.uregs[fiq_rcount] = hw->len - 1; + regs.uregs[fiq_rirq] = (long)S3C24XX_VA_IRQ; + + set_fiq_regs(®s); + + if (hw->fiq_mode != mode) { + u32 *ack_ptr; + + hw->fiq_mode = mode; + + switch (mode) { + case FIQ_MODE_TX: + code = &s3c24xx_spi_fiq_tx; + break; + case FIQ_MODE_RX: + code = &s3c24xx_spi_fiq_rx; + break; + case FIQ_MODE_TXRX: + code = &s3c24xx_spi_fiq_txrx; + break; + default: + code = NULL; + } + + BUG_ON(!code); + + ack_ptr = (u32 *)&code->data[code->ack_offset]; + *ack_ptr = ack_bit(hw->irq); + + set_fiq_handler(&code->data, code->length); + } + + s3c24xx_set_fiq(hw->irq, true); + + hw->fiq_mode = mode; + hw->fiq_inuse = 1; +} + +/** + * s3c24xx_spi_fiqop - FIQ core code callback + * @pw: Data registered with the handler + * @release: Whether this is a release or a return. + * + * Called by the FIQ code when another module wants to use the FIQ, so + * return whether we are currently using this or not and then update our + * internal state. + */ +static int s3c24xx_spi_fiqop(void *pw, int release) +{ + struct s3c24xx_spi *hw = pw; + int ret = 0; + + if (release) { + if (hw->fiq_inuse) + ret = -EBUSY; + + /* note, we do not need to unroute the FIQ, as the FIQ + * vector code de-routes it to signal the end of transfer */ + + hw->fiq_mode = FIQ_MODE_NONE; + hw->fiq_claimed = 0; + } else { + hw->fiq_claimed = 1; + } + + return ret; +} + +/** + * s3c24xx_spi_initfiq - setup the information for the FIQ core + * @hw: The hardware state. + * + * Setup the fiq_handler block to pass to the FIQ core. + */ +static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *hw) +{ + hw->fiq_handler.dev_id = hw; + hw->fiq_handler.name = dev_name(hw->dev); + hw->fiq_handler.fiq_op = s3c24xx_spi_fiqop; +} + +/** + * s3c24xx_spi_usefiq - return if we should be using FIQ. + * @hw: The hardware state. + * + * Return true if the platform data specifies whether this channel is + * allowed to use the FIQ. + */ +static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *hw) +{ + return hw->pdata->use_fiq; +} + +/** + * s3c24xx_spi_usingfiq - return if channel is using FIQ + * @spi: The hardware state. + * + * Return whether the channel is currently using the FIQ (separate from + * whether the FIQ is claimed). + */ +static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *spi) +{ + return spi->fiq_inuse; +} +#else + +static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *s) { } +static inline void s3c24xx_spi_tryfiq(struct s3c24xx_spi *s) { } +static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *s) { return false; } +static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *s) { return false; } + +#endif /* CONFIG_SPI_S3C24XX_FIQ */ + static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t) { struct s3c24xx_spi *hw = to_hw(spi); - dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", - t->tx_buf, t->rx_buf, t->len); - hw->tx = t->tx_buf; hw->rx = t->rx_buf; hw->len = t->len; @@ -228,11 +429,14 @@ static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t) init_completion(&hw->done); + hw->fiq_inuse = 0; + if (s3c24xx_spi_usefiq(hw) && t->len >= 3) + s3c24xx_spi_tryfiq(hw); + /* send the first byte */ writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT); wait_for_completion(&hw->done); - return hw->count; } @@ -254,17 +458,27 @@ static irqreturn_t s3c24xx_spi_irq(int irq, void *dev) goto irq_done; } - hw->count++; + if (!s3c24xx_spi_usingfiq(hw)) { + hw->count++; - if (hw->rx) - hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT); + if (hw->rx) + hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT); - count++; + count++; + + if (count < hw->len) + writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT); + else + complete(&hw->done); + } else { + hw->count = hw->len; + hw->fiq_inuse = 0; + + if (hw->rx) + hw->rx[hw->len-1] = readb(hw->regs + S3C2410_SPRDAT); - if (count < hw->len) - writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT); - else complete(&hw->done); + } irq_done: return IRQ_HANDLED; @@ -322,6 +536,10 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, hw); init_completion(&hw->done); + /* initialise fiq handler */ + + s3c24xx_spi_initfiq(hw); + /* setup the master state. */ /* the spi->mode bits understood by this driver: */ diff --git a/drivers/spi/spi_s3c24xx_fiq.S b/drivers/spi/spi_s3c24xx_fiq.S new file mode 100644 index 000000000000..3793cae361db --- /dev/null +++ b/drivers/spi/spi_s3c24xx_fiq.S @@ -0,0 +1,116 @@ +/* linux/drivers/spi/spi_s3c24xx_fiq.S + * + * Copyright 2009 Simtec Electronics + * Ben Dooks + * + * S3C24XX SPI - FIQ pseudo-DMA transfer code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +#include +#include +#include + +#include "spi_s3c24xx_fiq.h" + + .text + + @ entry to these routines is as follows, with the register names + @ defined in fiq.h so that they can be shared with the C files which + @ setup the calling registers. + @ + @ fiq_rirq The base of the IRQ registers to find S3C2410_SRCPND + @ fiq_rtmp Temporary register to hold tx/rx data + @ fiq_rspi The base of the SPI register block + @ fiq_rtx The tx buffer pointer + @ fiq_rrx The rx buffer pointer + @ fiq_rcount The number of bytes to move + + @ each entry starts with a word entry of how long it is + @ and an offset to the irq acknowledgment word + +ENTRY(s3c24xx_spi_fiq_rx) +s3c24xx_spi_fix_rx: + .word fiq_rx_end - fiq_rx_start + .word fiq_rx_irq_ack - fiq_rx_start +fiq_rx_start: + ldr fiq_rtmp, fiq_rx_irq_ack + str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] + + ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] + strb fiq_rtmp, [ fiq_rrx ], #1 + + mov fiq_rtmp, #0xff + strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] + + subs fiq_rcount, fiq_rcount, #1 + subnes pc, lr, #4 @@ return, still have work to do + + @@ set IRQ controller so that next op will trigger IRQ + mov fiq_rtmp, #0 + str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] + subs pc, lr, #4 + +fiq_rx_irq_ack: + .word 0 +fiq_rx_end: + +ENTRY(s3c24xx_spi_fiq_txrx) +s3c24xx_spi_fiq_txrx: + .word fiq_txrx_end - fiq_txrx_start + .word fiq_txrx_irq_ack - fiq_txrx_start +fiq_txrx_start: + + ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] + strb fiq_rtmp, [ fiq_rrx ], #1 + + ldr fiq_rtmp, fiq_txrx_irq_ack + str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] + + ldrb fiq_rtmp, [ fiq_rtx ], #1 + strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] + + subs fiq_rcount, fiq_rcount, #1 + subnes pc, lr, #4 @@ return, still have work to do + + mov fiq_rtmp, #0 + str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] + subs pc, lr, #4 + +fiq_txrx_irq_ack: + .word 0 + +fiq_txrx_end: + +ENTRY(s3c24xx_spi_fiq_tx) +s3c24xx_spi_fix_tx: + .word fiq_tx_end - fiq_tx_start + .word fiq_tx_irq_ack - fiq_tx_start +fiq_tx_start: + ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] + + ldr fiq_rtmp, fiq_tx_irq_ack + str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] + + ldrb fiq_rtmp, [ fiq_rtx ], #1 + strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] + + subs fiq_rcount, fiq_rcount, #1 + subnes pc, lr, #4 @@ return, still have work to do + + mov fiq_rtmp, #0 + str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] + subs pc, lr, #4 + +fiq_tx_irq_ack: + .word 0 + +fiq_tx_end: + + .end diff --git a/drivers/spi/spi_s3c24xx_fiq.h b/drivers/spi/spi_s3c24xx_fiq.h new file mode 100644 index 000000000000..a5950bb25b51 --- /dev/null +++ b/drivers/spi/spi_s3c24xx_fiq.h @@ -0,0 +1,26 @@ +/* linux/drivers/spi/spi_s3c24xx_fiq.h + * + * Copyright 2009 Simtec Electronics + * Ben Dooks + * + * S3C24XX SPI - FIQ pseudo-DMA transfer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* We have R8 through R13 to play with */ + +#ifdef __ASSEMBLY__ +#define __REG_NR(x) r##x +#else +#define __REG_NR(x) (x) +#endif + +#define fiq_rspi __REG_NR(8) +#define fiq_rtmp __REG_NR(9) +#define fiq_rrx __REG_NR(10) +#define fiq_rtx __REG_NR(11) +#define fiq_rcount __REG_NR(12) +#define fiq_rirq __REG_NR(13) -- GitLab From 6aed4ee9b4610cd1e0315c90855b32e59ee81a15 Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Mon, 14 Dec 2009 22:20:20 -0800 Subject: [PATCH 342/618] atmel_spi: fix dma addr calculation for len > BUFFER_SIZE If len > BUFFER_LEN and !xfer->rx_buf we end up calculating the tx buffer address as *tx_dma = xfer->tx_dma + xfer->len - BUFFER_SIZE; which is constant; i.e. we just send the last BUFFER_SIZE data over again until we've reached the right number of bytes. This patch gets around this by using the /requested/ length when calculating addresses. Note there's no way len != *plen when we calculate the rx buffer address but conceptually we should be using *plen and I don't want someone to come through later, see the calculations for rx and tx are different and "clean up" back to what we had. Signed-off-by: Ben Nizette Cc: Haavard Skinnemoen Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Grant Likely --- drivers/spi/atmel_spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index f5b3fdbb1e27..8ce70cbdbb96 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -189,14 +189,14 @@ static void atmel_spi_next_xfer_data(struct spi_master *master, /* use scratch buffer only when rx or tx data is unspecified */ if (xfer->rx_buf) - *rx_dma = xfer->rx_dma + xfer->len - len; + *rx_dma = xfer->rx_dma + xfer->len - *plen; else { *rx_dma = as->buffer_dma; if (len > BUFFER_SIZE) len = BUFFER_SIZE; } if (xfer->tx_buf) - *tx_dma = xfer->tx_dma + xfer->len - len; + *tx_dma = xfer->tx_dma + xfer->len - *plen; else { *tx_dma = as->buffer_dma; if (len > BUFFER_SIZE) -- GitLab From 9afa2fb6c13501e5b3536d15344fce4e5442c469 Mon Sep 17 00:00:00 2001 From: Erez Zadok Date: Wed, 2 Dec 2009 19:51:54 -0500 Subject: [PATCH 343/618] fsstack/ecryptfs: remove unused get_nlinks param to fsstack_copy_attr_all This get_nlinks parameter was never used by the only mainline user, ecryptfs; and it has never been used by unionfs or wrapfs either. Acked-by: Dustin Kirkland Acked-by: Tyler Hicks Signed-off-by: Erez Zadok Signed-off-by: Al Viro --- fs/ecryptfs/dentry.c | 2 +- fs/ecryptfs/inode.c | 6 +++--- fs/ecryptfs/main.c | 2 +- fs/stack.c | 17 +++-------------- include/linux/fs_stack.h | 4 +--- 5 files changed, 9 insertions(+), 22 deletions(-) diff --git a/fs/ecryptfs/dentry.c b/fs/ecryptfs/dentry.c index 2dda5ade75bc..8f006a0d6076 100644 --- a/fs/ecryptfs/dentry.c +++ b/fs/ecryptfs/dentry.c @@ -62,7 +62,7 @@ static int ecryptfs_d_revalidate(struct dentry *dentry, struct nameidata *nd) struct inode *lower_inode = ecryptfs_inode_to_lower(dentry->d_inode); - fsstack_copy_attr_all(dentry->d_inode, lower_inode, NULL); + fsstack_copy_attr_all(dentry->d_inode, lower_inode); } out: return rc; diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 056fed62d0de..429ca0b3ba08 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -626,9 +626,9 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry, lower_new_dir_dentry->d_inode, lower_new_dentry); if (rc) goto out_lock; - fsstack_copy_attr_all(new_dir, lower_new_dir_dentry->d_inode, NULL); + fsstack_copy_attr_all(new_dir, lower_new_dir_dentry->d_inode); if (new_dir != old_dir) - fsstack_copy_attr_all(old_dir, lower_old_dir_dentry->d_inode, NULL); + fsstack_copy_attr_all(old_dir, lower_old_dir_dentry->d_inode); out_lock: unlock_rename(lower_old_dir_dentry, lower_new_dir_dentry); dput(lower_new_dentry->d_parent); @@ -967,7 +967,7 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia) rc = notify_change(lower_dentry, ia); mutex_unlock(&lower_dentry->d_inode->i_mutex); out: - fsstack_copy_attr_all(inode, lower_inode, NULL); + fsstack_copy_attr_all(inode, lower_inode); return rc; } diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 101fe4c7b1ee..567bc4b9f70a 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -189,7 +189,7 @@ int ecryptfs_interpose(struct dentry *lower_dentry, struct dentry *dentry, init_special_inode(inode, lower_inode->i_mode, lower_inode->i_rdev); dentry->d_op = &ecryptfs_dops; - fsstack_copy_attr_all(inode, lower_inode, NULL); + fsstack_copy_attr_all(inode, lower_inode); /* This size will be overwritten for real files w/ headers and * other metadata */ fsstack_copy_inode_size(inode, lower_inode); diff --git a/fs/stack.c b/fs/stack.c index 67716f6a1a4a..0e20e43ad740 100644 --- a/fs/stack.c +++ b/fs/stack.c @@ -14,11 +14,8 @@ void fsstack_copy_inode_size(struct inode *dst, const struct inode *src) } EXPORT_SYMBOL_GPL(fsstack_copy_inode_size); -/* copy all attributes; get_nlinks is optional way to override the i_nlink - * copying - */ -void fsstack_copy_attr_all(struct inode *dest, const struct inode *src, - int (*get_nlinks)(struct inode *)) +/* copy all attributes */ +void fsstack_copy_attr_all(struct inode *dest, const struct inode *src) { dest->i_mode = src->i_mode; dest->i_uid = src->i_uid; @@ -29,14 +26,6 @@ void fsstack_copy_attr_all(struct inode *dest, const struct inode *src, dest->i_ctime = src->i_ctime; dest->i_blkbits = src->i_blkbits; dest->i_flags = src->i_flags; - - /* - * Update the nlinks AFTER updating the above fields, because the - * get_links callback may depend on them. - */ - if (!get_nlinks) - dest->i_nlink = src->i_nlink; - else - dest->i_nlink = (*get_nlinks)(dest); + dest->i_nlink = src->i_nlink; } EXPORT_SYMBOL_GPL(fsstack_copy_attr_all); diff --git a/include/linux/fs_stack.h b/include/linux/fs_stack.h index bb516ceeefc9..aa60311900dd 100644 --- a/include/linux/fs_stack.h +++ b/include/linux/fs_stack.h @@ -8,9 +8,7 @@ #include /* externs for fs/stack.c */ -extern void fsstack_copy_attr_all(struct inode *dest, const struct inode *src, - int (*get_nlinks)(struct inode *)); - +extern void fsstack_copy_attr_all(struct inode *dest, const struct inode *src); extern void fsstack_copy_inode_size(struct inode *dst, const struct inode *src); /* inlines */ -- GitLab From 230d42d422e7b69fc9b270f41c69e63b54572e26 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Mon, 30 Nov 2009 07:39:42 +0000 Subject: [PATCH 344/618] spi: Add s3c64xx SPI Controller driver Each SPI controller has exactly one CS line and as such doesn't provide for multi-cs. We implement a workaround to support multi-cs by _not_ configuring the mux'ed CS pin for each SPI controller. The CS mechanism is assumed to be fully machine specific - the driver doesn't even assume some GPIO pin is used to control the CS. The driver selects between DMA and POLLING mode depending upon the xfer size - DMA mode for xfers bigger than FIFO size, POLLING mode otherwise. The driver has been designed to be capable of running SoCs since s3c64xx and till date, for that reason some of the register fields have been passed via, SoC specific, platform data. Signed-off-by: Jassi Brar Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi_s3c64xx.c | 1196 +++++++++++++++++++++++++++++++++++++ 3 files changed, 1204 insertions(+) create mode 100644 drivers/spi/spi_s3c64xx.c diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 6fa595e0c989..c712f53cd5c9 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -240,6 +240,13 @@ config SPI_S3C24XX_GPIO the inbuilt hardware cannot provide the transfer mode, or where the board is using non hardware connected pins. +config SPI_S3C64XX + tristate "Samsung S3C64XX series type SPI" + depends on ARCH_S3C64XX && EXPERIMENTAL + select S3C64XX_DMA + help + SPI driver for Samsung S3C64XX and newer SoCs. + config SPI_SH_MSIOF tristate "SuperH MSIOF SPI controller" depends on SUPERH && HAVE_CLK diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 33faa7fa0ab8..f3d2810ba11c 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o +obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o obj-$(CONFIG_SPI_TXX9) += spi_txx9.o obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c new file mode 100644 index 000000000000..88a456dba967 --- /dev/null +++ b/drivers/spi/spi_s3c64xx.c @@ -0,0 +1,1196 @@ +/* linux/drivers/spi/spi_s3c64xx.c + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* Registers and bit-fields */ + +#define S3C64XX_SPI_CH_CFG 0x00 +#define S3C64XX_SPI_CLK_CFG 0x04 +#define S3C64XX_SPI_MODE_CFG 0x08 +#define S3C64XX_SPI_SLAVE_SEL 0x0C +#define S3C64XX_SPI_INT_EN 0x10 +#define S3C64XX_SPI_STATUS 0x14 +#define S3C64XX_SPI_TX_DATA 0x18 +#define S3C64XX_SPI_RX_DATA 0x1C +#define S3C64XX_SPI_PACKET_CNT 0x20 +#define S3C64XX_SPI_PENDING_CLR 0x24 +#define S3C64XX_SPI_SWAP_CFG 0x28 +#define S3C64XX_SPI_FB_CLK 0x2C + +#define S3C64XX_SPI_CH_HS_EN (1<<6) /* High Speed Enable */ +#define S3C64XX_SPI_CH_SW_RST (1<<5) +#define S3C64XX_SPI_CH_SLAVE (1<<4) +#define S3C64XX_SPI_CPOL_L (1<<3) +#define S3C64XX_SPI_CPHA_B (1<<2) +#define S3C64XX_SPI_CH_RXCH_ON (1<<1) +#define S3C64XX_SPI_CH_TXCH_ON (1<<0) + +#define S3C64XX_SPI_CLKSEL_SRCMSK (3<<9) +#define S3C64XX_SPI_CLKSEL_SRCSHFT 9 +#define S3C64XX_SPI_ENCLK_ENABLE (1<<8) +#define S3C64XX_SPI_PSR_MASK 0xff + +#define S3C64XX_SPI_MODE_CH_TSZ_BYTE (0<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD (1<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_WORD (2<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_MASK (3<<29) +#define S3C64XX_SPI_MODE_BUS_TSZ_BYTE (0<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD (1<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_WORD (2<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_MASK (3<<17) +#define S3C64XX_SPI_MODE_RXDMA_ON (1<<2) +#define S3C64XX_SPI_MODE_TXDMA_ON (1<<1) +#define S3C64XX_SPI_MODE_4BURST (1<<0) + +#define S3C64XX_SPI_SLAVE_AUTO (1<<1) +#define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0) + +#define S3C64XX_SPI_ACT(c) writel(0, (c)->regs + S3C64XX_SPI_SLAVE_SEL) + +#define S3C64XX_SPI_DEACT(c) writel(S3C64XX_SPI_SLAVE_SIG_INACT, \ + (c)->regs + S3C64XX_SPI_SLAVE_SEL) + +#define S3C64XX_SPI_INT_TRAILING_EN (1<<6) +#define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5) +#define S3C64XX_SPI_INT_RX_UNDERRUN_EN (1<<4) +#define S3C64XX_SPI_INT_TX_OVERRUN_EN (1<<3) +#define S3C64XX_SPI_INT_TX_UNDERRUN_EN (1<<2) +#define S3C64XX_SPI_INT_RX_FIFORDY_EN (1<<1) +#define S3C64XX_SPI_INT_TX_FIFORDY_EN (1<<0) + +#define S3C64XX_SPI_ST_RX_OVERRUN_ERR (1<<5) +#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR (1<<4) +#define S3C64XX_SPI_ST_TX_OVERRUN_ERR (1<<3) +#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR (1<<2) +#define S3C64XX_SPI_ST_RX_FIFORDY (1<<1) +#define S3C64XX_SPI_ST_TX_FIFORDY (1<<0) + +#define S3C64XX_SPI_PACKET_CNT_EN (1<<16) + +#define S3C64XX_SPI_PND_TX_UNDERRUN_CLR (1<<4) +#define S3C64XX_SPI_PND_TX_OVERRUN_CLR (1<<3) +#define S3C64XX_SPI_PND_RX_UNDERRUN_CLR (1<<2) +#define S3C64XX_SPI_PND_RX_OVERRUN_CLR (1<<1) +#define S3C64XX_SPI_PND_TRAILING_CLR (1<<0) + +#define S3C64XX_SPI_SWAP_RX_HALF_WORD (1<<7) +#define S3C64XX_SPI_SWAP_RX_BYTE (1<<6) +#define S3C64XX_SPI_SWAP_RX_BIT (1<<5) +#define S3C64XX_SPI_SWAP_RX_EN (1<<4) +#define S3C64XX_SPI_SWAP_TX_HALF_WORD (1<<3) +#define S3C64XX_SPI_SWAP_TX_BYTE (1<<2) +#define S3C64XX_SPI_SWAP_TX_BIT (1<<1) +#define S3C64XX_SPI_SWAP_TX_EN (1<<0) + +#define S3C64XX_SPI_FBCLK_MSK (3<<0) + +#define S3C64XX_SPI_ST_TRLCNTZ(v, i) ((((v) >> (i)->rx_lvl_offset) & \ + (((i)->fifo_lvl_mask + 1))) \ + ? 1 : 0) + +#define S3C64XX_SPI_ST_TX_DONE(v, i) ((((v) >> (i)->rx_lvl_offset) & \ + (((i)->fifo_lvl_mask + 1) << 1)) \ + ? 1 : 0) +#define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask) +#define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask) + +#define S3C64XX_SPI_MAX_TRAILCNT 0x3ff +#define S3C64XX_SPI_TRAILCNT_OFF 19 + +#define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +#define SUSPND (1<<0) +#define SPIBUSY (1<<1) +#define RXBUSY (1<<2) +#define TXBUSY (1<<3) + +/** + * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver. + * @clk: Pointer to the spi clock. + * @master: Pointer to the SPI Protocol master. + * @workqueue: Work queue for the SPI xfer requests. + * @cntrlr_info: Platform specific data for the controller this driver manages. + * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint. + * @work: Work + * @queue: To log SPI xfer requests. + * @lock: Controller specific lock. + * @state: Set of FLAGS to indicate status. + * @rx_dmach: Controller's DMA channel for Rx. + * @tx_dmach: Controller's DMA channel for Tx. + * @sfr_start: BUS address of SPI controller regs. + * @regs: Pointer to ioremap'ed controller registers. + * @xfer_completion: To indicate completion of xfer task. + * @cur_mode: Stores the active configuration of the controller. + * @cur_bpw: Stores the active bits per word settings. + * @cur_speed: Stores the active xfer clock speed. + */ +struct s3c64xx_spi_driver_data { + void __iomem *regs; + struct clk *clk; + struct platform_device *pdev; + struct spi_master *master; + struct workqueue_struct *workqueue; + struct s3c64xx_spi_cntrlr_info *cntrlr_info; + struct spi_device *tgl_spi; + struct work_struct work; + struct list_head queue; + spinlock_t lock; + enum dma_ch rx_dmach; + enum dma_ch tx_dmach; + unsigned long sfr_start; + struct completion xfer_completion; + unsigned state; + unsigned cur_mode, cur_bpw; + unsigned cur_speed; +}; + +static struct s3c2410_dma_client s3c64xx_spi_dma_client = { + .name = "samsung-spi-dma", +}; + +static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned long loops; + u32 val; + + writel(0, regs + S3C64XX_SPI_PACKET_CNT); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val |= S3C64XX_SPI_CH_SW_RST; + val &= ~S3C64XX_SPI_CH_HS_EN; + writel(val, regs + S3C64XX_SPI_CH_CFG); + + /* Flush TxFIFO*/ + loops = msecs_to_loops(1); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + } while (TX_FIFO_LVL(val, sci) && loops--); + + /* Flush RxFIFO*/ + loops = msecs_to_loops(1); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + if (RX_FIFO_LVL(val, sci)) + readl(regs + S3C64XX_SPI_RX_DATA); + else + break; + } while (loops--); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~S3C64XX_SPI_CH_SW_RST; + writel(val, regs + S3C64XX_SPI_CH_CFG); + + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON); + writel(val, regs + S3C64XX_SPI_CH_CFG); +} + +static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, + struct spi_device *spi, + struct spi_transfer *xfer, int dma_mode) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + u32 modecfg, chcfg; + + modecfg = readl(regs + S3C64XX_SPI_MODE_CFG); + modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); + + chcfg = readl(regs + S3C64XX_SPI_CH_CFG); + chcfg &= ~S3C64XX_SPI_CH_TXCH_ON; + + if (dma_mode) { + chcfg &= ~S3C64XX_SPI_CH_RXCH_ON; + } else { + /* Always shift in data in FIFO, even if xfer is Tx only, + * this helps setting PCKT_CNT value for generating clocks + * as exactly needed. + */ + chcfg |= S3C64XX_SPI_CH_RXCH_ON; + writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) + | S3C64XX_SPI_PACKET_CNT_EN, + regs + S3C64XX_SPI_PACKET_CNT); + } + + if (xfer->tx_buf != NULL) { + sdd->state |= TXBUSY; + chcfg |= S3C64XX_SPI_CH_TXCH_ON; + if (dma_mode) { + modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; + s3c2410_dma_config(sdd->tx_dmach, 1); + s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd, + xfer->tx_dma, xfer->len); + s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START); + } else { + unsigned char *buf = (unsigned char *) xfer->tx_buf; + int i = 0; + while (i < xfer->len) + writeb(buf[i++], regs + S3C64XX_SPI_TX_DATA); + } + } + + if (xfer->rx_buf != NULL) { + sdd->state |= RXBUSY; + + if (sci->high_speed && sdd->cur_speed >= 30000000UL + && !(sdd->cur_mode & SPI_CPHA)) + chcfg |= S3C64XX_SPI_CH_HS_EN; + + if (dma_mode) { + modecfg |= S3C64XX_SPI_MODE_RXDMA_ON; + chcfg |= S3C64XX_SPI_CH_RXCH_ON; + writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) + | S3C64XX_SPI_PACKET_CNT_EN, + regs + S3C64XX_SPI_PACKET_CNT); + s3c2410_dma_config(sdd->rx_dmach, 1); + s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd, + xfer->rx_dma, xfer->len); + s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START); + } + } + + writel(modecfg, regs + S3C64XX_SPI_MODE_CFG); + writel(chcfg, regs + S3C64XX_SPI_CH_CFG); +} + +static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd, + struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs; + + if (sdd->tgl_spi != NULL) { /* If last device toggled after mssg */ + if (sdd->tgl_spi != spi) { /* if last mssg on diff device */ + /* Deselect the last toggled device */ + cs = sdd->tgl_spi->controller_data; + cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1); + } + sdd->tgl_spi = NULL; + } + + cs = spi->controller_data; + cs->set_level(spi->mode & SPI_CS_HIGH ? 1 : 0); +} + +static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, + struct spi_transfer *xfer, int dma_mode) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned long val; + int ms; + + /* millisecs to xfer 'len' bytes @ 'cur_speed' */ + ms = xfer->len * 8 * 1000 / sdd->cur_speed; + ms += 5; /* some tolerance */ + + if (dma_mode) { + val = msecs_to_jiffies(ms) + 10; + val = wait_for_completion_timeout(&sdd->xfer_completion, val); + } else { + val = msecs_to_loops(ms); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + } while (RX_FIFO_LVL(val, sci) < xfer->len && --val); + } + + if (!val) + return -EIO; + + if (dma_mode) { + u32 status; + + /* + * DmaTx returns after simply writing data in the FIFO, + * w/o waiting for real transmission on the bus to finish. + * DmaRx returns only after Dma read data from FIFO which + * needs bus transmission to finish, so we don't worry if + * Xfer involved Rx(with or without Tx). + */ + if (xfer->rx_buf == NULL) { + val = msecs_to_loops(10); + status = readl(regs + S3C64XX_SPI_STATUS); + while ((TX_FIFO_LVL(status, sci) + || !S3C64XX_SPI_ST_TX_DONE(status, sci)) + && --val) { + cpu_relax(); + status = readl(regs + S3C64XX_SPI_STATUS); + } + + if (!val) + return -EIO; + } + } else { + unsigned char *buf; + int i; + + /* If it was only Tx */ + if (xfer->rx_buf == NULL) { + sdd->state &= ~TXBUSY; + return 0; + } + + i = 0; + buf = xfer->rx_buf; + while (i < xfer->len) + buf[i++] = readb(regs + S3C64XX_SPI_RX_DATA); + + sdd->state &= ~RXBUSY; + } + + return 0; +} + +static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, + struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + + if (sdd->tgl_spi == spi) + sdd->tgl_spi = NULL; + + cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1); +} + +static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + u32 val; + + /* Disable Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + + /* Set Polarity and Phase */ + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~(S3C64XX_SPI_CH_SLAVE | + S3C64XX_SPI_CPOL_L | + S3C64XX_SPI_CPHA_B); + + if (sdd->cur_mode & SPI_CPOL) + val |= S3C64XX_SPI_CPOL_L; + + if (sdd->cur_mode & SPI_CPHA) + val |= S3C64XX_SPI_CPHA_B; + + writel(val, regs + S3C64XX_SPI_CH_CFG); + + /* Set Channel & DMA Mode */ + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~(S3C64XX_SPI_MODE_BUS_TSZ_MASK + | S3C64XX_SPI_MODE_CH_TSZ_MASK); + + switch (sdd->cur_bpw) { + case 32: + val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD; + break; + case 16: + val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD; + break; + default: + val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE; + break; + } + val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; /* Always 8bits wide */ + + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + /* Configure Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_PSR_MASK; + val |= ((clk_get_rate(sci->src_clk) / sdd->cur_speed / 2 - 1) + & S3C64XX_SPI_PSR_MASK); + writel(val, regs + S3C64XX_SPI_CLK_CFG); + + /* Enable Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val |= S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); +} + +void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id, + int size, enum s3c2410_dma_buffresult res) +{ + struct s3c64xx_spi_driver_data *sdd = buf_id; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + + if (res == S3C2410_RES_OK) + sdd->state &= ~RXBUSY; + else + dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size); + + /* If the other done */ + if (!(sdd->state & TXBUSY)) + complete(&sdd->xfer_completion); + + spin_unlock_irqrestore(&sdd->lock, flags); +} + +void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id, + int size, enum s3c2410_dma_buffresult res) +{ + struct s3c64xx_spi_driver_data *sdd = buf_id; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + + if (res == S3C2410_RES_OK) + sdd->state &= ~TXBUSY; + else + dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size); + + /* If the other done */ + if (!(sdd->state & RXBUSY)) + complete(&sdd->xfer_completion); + + spin_unlock_irqrestore(&sdd->lock, flags); +} + +#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32) + +static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, + struct spi_message *msg) +{ + struct device *dev = &sdd->pdev->dev; + struct spi_transfer *xfer; + + if (msg->is_dma_mapped) + return 0; + + /* First mark all xfer unmapped */ + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + xfer->rx_dma = XFER_DMAADDR_INVALID; + xfer->tx_dma = XFER_DMAADDR_INVALID; + } + + /* Map until end or first fail */ + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + + if (xfer->tx_buf != NULL) { + xfer->tx_dma = dma_map_single(dev, xfer->tx_buf, + xfer->len, DMA_TO_DEVICE); + if (dma_mapping_error(dev, xfer->tx_dma)) { + dev_err(dev, "dma_map_single Tx failed\n"); + xfer->tx_dma = XFER_DMAADDR_INVALID; + return -ENOMEM; + } + } + + if (xfer->rx_buf != NULL) { + xfer->rx_dma = dma_map_single(dev, xfer->rx_buf, + xfer->len, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, xfer->rx_dma)) { + dev_err(dev, "dma_map_single Rx failed\n"); + dma_unmap_single(dev, xfer->tx_dma, + xfer->len, DMA_TO_DEVICE); + xfer->tx_dma = XFER_DMAADDR_INVALID; + xfer->rx_dma = XFER_DMAADDR_INVALID; + return -ENOMEM; + } + } + } + + return 0; +} + +static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, + struct spi_message *msg) +{ + struct device *dev = &sdd->pdev->dev; + struct spi_transfer *xfer; + + if (msg->is_dma_mapped) + return; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + + if (xfer->rx_buf != NULL + && xfer->rx_dma != XFER_DMAADDR_INVALID) + dma_unmap_single(dev, xfer->rx_dma, + xfer->len, DMA_FROM_DEVICE); + + if (xfer->tx_buf != NULL + && xfer->tx_dma != XFER_DMAADDR_INVALID) + dma_unmap_single(dev, xfer->tx_dma, + xfer->len, DMA_TO_DEVICE); + } +} + +static void handle_msg(struct s3c64xx_spi_driver_data *sdd, + struct spi_message *msg) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct spi_device *spi = msg->spi; + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + struct spi_transfer *xfer; + int status = 0, cs_toggle = 0; + u32 speed; + u8 bpw; + + /* If Master's(controller) state differs from that needed by Slave */ + if (sdd->cur_speed != spi->max_speed_hz + || sdd->cur_mode != spi->mode + || sdd->cur_bpw != spi->bits_per_word) { + sdd->cur_bpw = spi->bits_per_word; + sdd->cur_speed = spi->max_speed_hz; + sdd->cur_mode = spi->mode; + s3c64xx_spi_config(sdd); + } + + /* Map all the transfers if needed */ + if (s3c64xx_spi_map_mssg(sdd, msg)) { + dev_err(&spi->dev, + "Xfer: Unable to map message buffers!\n"); + status = -ENOMEM; + goto out; + } + + /* Configure feedback delay */ + writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK); + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + + unsigned long flags; + int use_dma; + + INIT_COMPLETION(sdd->xfer_completion); + + /* Only BPW and Speed may change across transfers */ + bpw = xfer->bits_per_word ? : spi->bits_per_word; + speed = xfer->speed_hz ? : spi->max_speed_hz; + + if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) { + sdd->cur_bpw = bpw; + sdd->cur_speed = speed; + s3c64xx_spi_config(sdd); + } + + /* Polling method for xfers not bigger than FIFO capacity */ + if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) + use_dma = 0; + else + use_dma = 1; + + spin_lock_irqsave(&sdd->lock, flags); + + /* Pending only which is to be done */ + sdd->state &= ~RXBUSY; + sdd->state &= ~TXBUSY; + + enable_datapath(sdd, spi, xfer, use_dma); + + /* Slave Select */ + enable_cs(sdd, spi); + + /* Start the signals */ + S3C64XX_SPI_ACT(sdd); + + spin_unlock_irqrestore(&sdd->lock, flags); + + status = wait_for_xfer(sdd, xfer, use_dma); + + /* Quiese the signals */ + S3C64XX_SPI_DEACT(sdd); + + if (status) { + dev_err(&spi->dev, "I/O Error: \ + rx-%d tx-%d res:rx-%c tx-%c len-%d\n", + xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, + (sdd->state & RXBUSY) ? 'f' : 'p', + (sdd->state & TXBUSY) ? 'f' : 'p', + xfer->len); + + if (use_dma) { + if (xfer->tx_buf != NULL + && (sdd->state & TXBUSY)) + s3c2410_dma_ctrl(sdd->tx_dmach, + S3C2410_DMAOP_FLUSH); + if (xfer->rx_buf != NULL + && (sdd->state & RXBUSY)) + s3c2410_dma_ctrl(sdd->rx_dmach, + S3C2410_DMAOP_FLUSH); + } + + goto out; + } + + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + + if (xfer->cs_change) { + /* Hint that the next mssg is gonna be + for the same device */ + if (list_is_last(&xfer->transfer_list, + &msg->transfers)) + cs_toggle = 1; + else + disable_cs(sdd, spi); + } + + msg->actual_length += xfer->len; + + flush_fifo(sdd); + } + +out: + if (!cs_toggle || status) + disable_cs(sdd, spi); + else + sdd->tgl_spi = spi; + + s3c64xx_spi_unmap_mssg(sdd, msg); + + msg->status = status; + + if (msg->complete) + msg->complete(msg->context); +} + +static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) +{ + if (s3c2410_dma_request(sdd->rx_dmach, + &s3c64xx_spi_dma_client, NULL) < 0) { + dev_err(&sdd->pdev->dev, "cannot get RxDMA\n"); + return 0; + } + s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb); + s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW, + sdd->sfr_start + S3C64XX_SPI_RX_DATA); + + if (s3c2410_dma_request(sdd->tx_dmach, + &s3c64xx_spi_dma_client, NULL) < 0) { + dev_err(&sdd->pdev->dev, "cannot get TxDMA\n"); + s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); + return 0; + } + s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb); + s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM, + sdd->sfr_start + S3C64XX_SPI_TX_DATA); + + return 1; +} + +static void s3c64xx_spi_work(struct work_struct *work) +{ + struct s3c64xx_spi_driver_data *sdd = container_of(work, + struct s3c64xx_spi_driver_data, work); + unsigned long flags; + + /* Acquire DMA channels */ + while (!acquire_dma(sdd)) + msleep(10); + + spin_lock_irqsave(&sdd->lock, flags); + + while (!list_empty(&sdd->queue) + && !(sdd->state & SUSPND)) { + + struct spi_message *msg; + + msg = container_of(sdd->queue.next, struct spi_message, queue); + + list_del_init(&msg->queue); + + /* Set Xfer busy flag */ + sdd->state |= SPIBUSY; + + spin_unlock_irqrestore(&sdd->lock, flags); + + handle_msg(sdd, msg); + + spin_lock_irqsave(&sdd->lock, flags); + + sdd->state &= ~SPIBUSY; + } + + spin_unlock_irqrestore(&sdd->lock, flags); + + /* Free DMA channels */ + s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client); + s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); +} + +static int s3c64xx_spi_transfer(struct spi_device *spi, + struct spi_message *msg) +{ + struct s3c64xx_spi_driver_data *sdd; + unsigned long flags; + + sdd = spi_master_get_devdata(spi->master); + + spin_lock_irqsave(&sdd->lock, flags); + + if (sdd->state & SUSPND) { + spin_unlock_irqrestore(&sdd->lock, flags); + return -ESHUTDOWN; + } + + msg->status = -EINPROGRESS; + msg->actual_length = 0; + + list_add_tail(&msg->queue, &sdd->queue); + + queue_work(sdd->workqueue, &sdd->work); + + spin_unlock_irqrestore(&sdd->lock, flags); + + return 0; +} + +/* + * Here we only check the validity of requested configuration + * and save the configuration in a local data-structure. + * The controller is actually configured only just before we + * get a message to transfer. + */ +static int s3c64xx_spi_setup(struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_cntrlr_info *sci; + struct spi_message *msg; + u32 psr, speed; + unsigned long flags; + int err = 0; + + if (cs == NULL || cs->set_level == NULL) { + dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select); + return -ENODEV; + } + + sdd = spi_master_get_devdata(spi->master); + sci = sdd->cntrlr_info; + + spin_lock_irqsave(&sdd->lock, flags); + + list_for_each_entry(msg, &sdd->queue, queue) { + /* Is some mssg is already queued for this device */ + if (msg->spi == spi) { + dev_err(&spi->dev, + "setup: attempt while mssg in queue!\n"); + spin_unlock_irqrestore(&sdd->lock, flags); + return -EBUSY; + } + } + + if (sdd->state & SUSPND) { + spin_unlock_irqrestore(&sdd->lock, flags); + dev_err(&spi->dev, + "setup: SPI-%d not active!\n", spi->master->bus_num); + return -ESHUTDOWN; + } + + spin_unlock_irqrestore(&sdd->lock, flags); + + if (spi->bits_per_word != 8 + && spi->bits_per_word != 16 + && spi->bits_per_word != 32) { + dev_err(&spi->dev, "setup: %dbits/wrd not supported!\n", + spi->bits_per_word); + err = -EINVAL; + goto setup_exit; + } + + /* Check if we can provide the requested rate */ + speed = clk_get_rate(sci->src_clk) / 2 / (0 + 1); /* Max possible */ + + if (spi->max_speed_hz > speed) + spi->max_speed_hz = speed; + + psr = clk_get_rate(sci->src_clk) / 2 / spi->max_speed_hz - 1; + psr &= S3C64XX_SPI_PSR_MASK; + if (psr == S3C64XX_SPI_PSR_MASK) + psr--; + + speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz < speed) { + if (psr+1 < S3C64XX_SPI_PSR_MASK) { + psr++; + } else { + err = -EINVAL; + goto setup_exit; + } + } + + speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz >= speed) + spi->max_speed_hz = speed; + else + err = -EINVAL; + +setup_exit: + + /* setup() returns with device de-selected */ + disable_cs(sdd, spi); + + return err; +} + +static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned int val; + + sdd->cur_speed = 0; + + S3C64XX_SPI_DEACT(sdd); + + /* Disable Interrupts - we use Polling if not DMA mode */ + writel(0, regs + S3C64XX_SPI_INT_EN); + + writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, + regs + S3C64XX_SPI_CLK_CFG); + writel(0, regs + S3C64XX_SPI_MODE_CFG); + writel(0, regs + S3C64XX_SPI_PACKET_CNT); + + /* Clear any irq pending bits */ + writel(readl(regs + S3C64XX_SPI_PENDING_CLR), + regs + S3C64XX_SPI_PENDING_CLR); + + writel(0, regs + S3C64XX_SPI_SWAP_CFG); + + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~S3C64XX_SPI_MODE_4BURST; + val &= ~(S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); + val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + flush_fifo(sdd); +} + +static int __init s3c64xx_spi_probe(struct platform_device *pdev) +{ + struct resource *mem_res, *dmatx_res, *dmarx_res; + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_cntrlr_info *sci; + struct spi_master *master; + int ret; + + if (pdev->id < 0) { + dev_err(&pdev->dev, + "Invalid platform device id-%d\n", pdev->id); + return -ENODEV; + } + + if (pdev->dev.platform_data == NULL) { + dev_err(&pdev->dev, "platform_data missing!\n"); + return -ENODEV; + } + + /* Check for availability of necessary resource */ + + dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (dmatx_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI-Tx dma resource\n"); + return -ENXIO; + } + + dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (dmarx_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI-Rx dma resource\n"); + return -ENXIO; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (mem_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI MEM resource\n"); + return -ENXIO; + } + + master = spi_alloc_master(&pdev->dev, + sizeof(struct s3c64xx_spi_driver_data)); + if (master == NULL) { + dev_err(&pdev->dev, "Unable to allocate SPI Master\n"); + return -ENOMEM; + } + + sci = pdev->dev.platform_data; + + platform_set_drvdata(pdev, master); + + sdd = spi_master_get_devdata(master); + sdd->master = master; + sdd->cntrlr_info = sci; + sdd->pdev = pdev; + sdd->sfr_start = mem_res->start; + sdd->tx_dmach = dmatx_res->start; + sdd->rx_dmach = dmarx_res->start; + + sdd->cur_bpw = 8; + + master->bus_num = pdev->id; + master->setup = s3c64xx_spi_setup; + master->transfer = s3c64xx_spi_transfer; + master->num_chipselect = sci->num_cs; + master->dma_alignment = 8; + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + if (request_mem_region(mem_res->start, + resource_size(mem_res), pdev->name) == NULL) { + dev_err(&pdev->dev, "Req mem region failed\n"); + ret = -ENXIO; + goto err0; + } + + sdd->regs = ioremap(mem_res->start, resource_size(mem_res)); + if (sdd->regs == NULL) { + dev_err(&pdev->dev, "Unable to remap IO\n"); + ret = -ENXIO; + goto err1; + } + + if (sci->cfg_gpio == NULL || sci->cfg_gpio(pdev)) { + dev_err(&pdev->dev, "Unable to config gpio\n"); + ret = -EBUSY; + goto err2; + } + + /* Setup clocks */ + sdd->clk = clk_get(&pdev->dev, "spi"); + if (IS_ERR(sdd->clk)) { + dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n"); + ret = PTR_ERR(sdd->clk); + goto err3; + } + + if (clk_enable(sdd->clk)) { + dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n"); + ret = -EBUSY; + goto err4; + } + + if (sci->src_clk_nr == S3C64XX_SPI_SRCCLK_PCLK) + sci->src_clk = sdd->clk; + else + sci->src_clk = clk_get(&pdev->dev, sci->src_clk_name); + if (IS_ERR(sci->src_clk)) { + dev_err(&pdev->dev, + "Unable to acquire clock '%s'\n", sci->src_clk_name); + ret = PTR_ERR(sci->src_clk); + goto err5; + } + + if (sci->src_clk != sdd->clk && clk_enable(sci->src_clk)) { + dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", + sci->src_clk_name); + ret = -EBUSY; + goto err6; + } + + sdd->workqueue = create_singlethread_workqueue( + dev_name(master->dev.parent)); + if (sdd->workqueue == NULL) { + dev_err(&pdev->dev, "Unable to create workqueue\n"); + ret = -ENOMEM; + goto err7; + } + + /* Setup Deufult Mode */ + s3c64xx_spi_hwinit(sdd, pdev->id); + + spin_lock_init(&sdd->lock); + init_completion(&sdd->xfer_completion); + INIT_WORK(&sdd->work, s3c64xx_spi_work); + INIT_LIST_HEAD(&sdd->queue); + + if (spi_register_master(master)) { + dev_err(&pdev->dev, "cannot register SPI master\n"); + ret = -EBUSY; + goto err8; + } + + dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d \ + with %d Slaves attached\n", + pdev->id, master->num_chipselect); + dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\ + \tDMA=[Rx-%d, Tx-%d]\n", + mem_res->end, mem_res->start, + sdd->rx_dmach, sdd->tx_dmach); + + return 0; + +err8: + destroy_workqueue(sdd->workqueue); +err7: + if (sci->src_clk != sdd->clk) + clk_disable(sci->src_clk); +err6: + if (sci->src_clk != sdd->clk) + clk_put(sci->src_clk); +err5: + clk_disable(sdd->clk); +err4: + clk_put(sdd->clk); +err3: +err2: + iounmap((void *) sdd->regs); +err1: + release_mem_region(mem_res->start, resource_size(mem_res)); +err0: + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + + return ret; +} + +static int s3c64xx_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct resource *mem_res; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + sdd->state |= SUSPND; + spin_unlock_irqrestore(&sdd->lock, flags); + + while (sdd->state & SPIBUSY) + msleep(10); + + spi_unregister_master(master); + + destroy_workqueue(sdd->workqueue); + + if (sci->src_clk != sdd->clk) + clk_disable(sci->src_clk); + + if (sci->src_clk != sdd->clk) + clk_put(sci->src_clk); + + clk_disable(sdd->clk); + clk_put(sdd->clk); + + iounmap((void *) sdd->regs); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mem_res->start, resource_size(mem_res)); + + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_csinfo *cs; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + sdd->state |= SUSPND; + spin_unlock_irqrestore(&sdd->lock, flags); + + while (sdd->state & SPIBUSY) + msleep(10); + + /* Disable the clock */ + if (sci->src_clk != sdd->clk) + clk_disable(sci->src_clk); + + clk_disable(sdd->clk); + + sdd->cur_speed = 0; /* Output Clock is stopped */ + + return 0; +} + +static int s3c64xx_spi_resume(struct platform_device *pdev) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + unsigned long flags; + + sci->cfg_gpio(pdev); + + /* Enable the clock */ + if (sci->src_clk != sdd->clk) + clk_enable(sci->src_clk); + + clk_enable(sdd->clk); + + s3c64xx_spi_hwinit(sdd, pdev->id); + + spin_lock_irqsave(&sdd->lock, flags); + sdd->state &= ~SUSPND; + spin_unlock_irqrestore(&sdd->lock, flags); + + return 0; +} +#else +#define s3c64xx_spi_suspend NULL +#define s3c64xx_spi_resume NULL +#endif /* CONFIG_PM */ + +static struct platform_driver s3c64xx_spi_driver = { + .driver = { + .name = "s3c64xx-spi", + .owner = THIS_MODULE, + }, + .remove = s3c64xx_spi_remove, + .suspend = s3c64xx_spi_suspend, + .resume = s3c64xx_spi_resume, +}; +MODULE_ALIAS("platform:s3c64xx-spi"); + +static int __init s3c64xx_spi_init(void) +{ + return platform_driver_probe(&s3c64xx_spi_driver, s3c64xx_spi_probe); +} +module_init(s3c64xx_spi_init); + +static void __exit s3c64xx_spi_exit(void) +{ + platform_driver_unregister(&s3c64xx_spi_driver); +} +module_exit(s3c64xx_spi_exit); + +MODULE_AUTHOR("Jaswinder Singh "); +MODULE_DESCRIPTION("S3C64XX SPI Controller Driver"); +MODULE_LICENSE("GPL"); -- GitLab From 1b8ab8159ef8f818f870a1d2e3b6953d80eefd3f Mon Sep 17 00:00:00 2001 From: Erez Zadok Date: Thu, 3 Dec 2009 21:56:09 -0500 Subject: [PATCH 345/618] VFS/fsstack: handle 32-bit smp + preempt + large files in fsstack_copy_inode_size Copy the inode size and blocks from one inode to another correctly on 32-bit systems with CONFIG_SMP, CONFIG_PREEMPT, or CONFIG_LBDAF. Use proper inode spinlocks only when i_size/i_blocks cannot fit in one 32-bit word. Signed-off-by: Hugh Dickins Signed-off-by: Erez Zadok Signed-off-by: Al Viro --- fs/stack.c | 54 +++++++++++++++++++++++++++++++++++++--- include/linux/fs_stack.h | 2 +- 2 files changed, 52 insertions(+), 4 deletions(-) diff --git a/fs/stack.c b/fs/stack.c index 0e20e43ad740..4a6f7f440658 100644 --- a/fs/stack.c +++ b/fs/stack.c @@ -7,10 +7,58 @@ * This function cannot be inlined since i_size_{read,write} is rather * heavy-weight on 32-bit systems */ -void fsstack_copy_inode_size(struct inode *dst, const struct inode *src) +void fsstack_copy_inode_size(struct inode *dst, struct inode *src) { - i_size_write(dst, i_size_read((struct inode *)src)); - dst->i_blocks = src->i_blocks; + loff_t i_size; + blkcnt_t i_blocks; + + /* + * i_size_read() includes its own seqlocking and protection from + * preemption (see include/linux/fs.h): we need nothing extra for + * that here, and prefer to avoid nesting locks than attempt to keep + * i_size and i_blocks in sync together. + */ + i_size = i_size_read(src); + + /* + * But if CONFIG_LBDAF (on 32-bit), we ought to make an effort to + * keep the two halves of i_blocks in sync despite SMP or PREEMPT - + * though stat's generic_fillattr() doesn't bother, and we won't be + * applying quotas (where i_blocks does become important) at the + * upper level. + * + * We don't actually know what locking is used at the lower level; + * but if it's a filesystem that supports quotas, it will be using + * i_lock as in inode_add_bytes(). tmpfs uses other locking, and + * its 32-bit is (just) able to exceed 2TB i_size with the aid of + * holes; but its i_blocks cannot carry into the upper long without + * almost 2TB swap - let's ignore that case. + */ + if (sizeof(i_blocks) > sizeof(long)) + spin_lock(&src->i_lock); + i_blocks = src->i_blocks; + if (sizeof(i_blocks) > sizeof(long)) + spin_unlock(&src->i_lock); + + /* + * If CONFIG_SMP or CONFIG_PREEMPT on 32-bit, it's vital for + * fsstack_copy_inode_size() to hold some lock around + * i_size_write(), otherwise i_size_read() may spin forever (see + * include/linux/fs.h). We don't necessarily hold i_mutex when this + * is called, so take i_lock for that case. + * + * And if CONFIG_LBADF (on 32-bit), continue our effort to keep the + * two halves of i_blocks in sync despite SMP or PREEMPT: use i_lock + * for that case too, and do both at once by combining the tests. + * + * There is none of this locking overhead in the 64-bit case. + */ + if (sizeof(i_size) > sizeof(long) || sizeof(i_blocks) > sizeof(long)) + spin_lock(&dst->i_lock); + i_size_write(dst, i_size); + dst->i_blocks = i_blocks; + if (sizeof(i_size) > sizeof(long) || sizeof(i_blocks) > sizeof(long)) + spin_unlock(&dst->i_lock); } EXPORT_SYMBOL_GPL(fsstack_copy_inode_size); diff --git a/include/linux/fs_stack.h b/include/linux/fs_stack.h index aa60311900dd..da317c7163ab 100644 --- a/include/linux/fs_stack.h +++ b/include/linux/fs_stack.h @@ -9,7 +9,7 @@ /* externs for fs/stack.c */ extern void fsstack_copy_attr_all(struct inode *dest, const struct inode *src); -extern void fsstack_copy_inode_size(struct inode *dst, const struct inode *src); +extern void fsstack_copy_inode_size(struct inode *dst, struct inode *src); /* inlines */ static inline void fsstack_copy_attr_atime(struct inode *dest, -- GitLab From 905aa0ae91798feb4e12d6237496d269dc2f4962 Mon Sep 17 00:00:00 2001 From: hartleys Date: Mon, 14 Dec 2009 22:22:25 +0000 Subject: [PATCH 346/618] spi: atmel_spi.c: use resource_size() Signed-off-by: H Hartley Sweeten Cc: Haavard Skinnemoen Signed-off-by: Grant Likely --- drivers/spi/atmel_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 8ce70cbdbb96..d21c24eaf0a9 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -788,7 +788,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) spin_lock_init(&as->lock); INIT_LIST_HEAD(&as->queue); as->pdev = pdev; - as->regs = ioremap(regs->start, (regs->end - regs->start) + 1); + as->regs = ioremap(regs->start, resource_size(regs)); if (!as->regs) goto out_free_buffer; as->irq = irq; -- GitLab From 74947b898220c8af794f3de3f3c73a39799b4c4f Mon Sep 17 00:00:00 2001 From: hartleys Date: Mon, 14 Dec 2009 22:33:43 +0000 Subject: [PATCH 347/618] spi: spi_bfin5xx.c: use resource_size() Signed-off-by: H Hartley Sweeten Cc: David Brownell Cc: Bryan Wu Signed-off-by: Grant Likely --- drivers/spi/spi_bfin5xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 73e24ef5a2f9..1d41058bbab2 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1294,7 +1294,7 @@ static int __init bfin_spi_probe(struct platform_device *pdev) goto out_error_get_res; } - drv_data->regs_base = ioremap(res->start, (res->end - res->start + 1)); + drv_data->regs_base = ioremap(res->start, resource_size(res)); if (drv_data->regs_base == NULL) { dev_err(dev, "Cannot map IO\n"); status = -ENXIO; -- GitLab From 82de76513eeb35b93a591497dcff217f2ec76041 Mon Sep 17 00:00:00 2001 From: hartleys Date: Mon, 14 Dec 2009 22:37:15 +0000 Subject: [PATCH 348/618] spi: spi_mpc8xxx.c: use resource_size() Signed-off-by: H Hartley Sweeten Cc: David Brownell Cc: Kumar Gala Signed-off-by: Grant Likely --- drivers/spi/spi_mpc8xxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c index 1d98be9b1946..797226cb7ef1 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_mpc8xxx.c @@ -566,7 +566,7 @@ mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) init_completion(&mpc8xxx_spi->done); - mpc8xxx_spi->base = ioremap(mem->start, mem->end - mem->start + 1); + mpc8xxx_spi->base = ioremap(mem->start, resource_size(mem)); if (mpc8xxx_spi->base == NULL) { ret = -ENOMEM; goto put_master; -- GitLab From 76b6fdd35a2d796febd5dbe0e25f42e2616bfed3 Mon Sep 17 00:00:00 2001 From: hartleys Date: Mon, 14 Dec 2009 22:40:05 +0000 Subject: [PATCH 349/618] spi: spi_sh_sci.c: use resource_size() Signed-off-by: H Hartley Sweeten Cc: David Brownell Signed-off-by: Grant Likely --- drivers/spi/spi_sh_sci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi_sh_sci.c b/drivers/spi/spi_sh_sci.c index 7d36720eb982..a65c12ffa733 100644 --- a/drivers/spi/spi_sh_sci.c +++ b/drivers/spi/spi_sh_sci.c @@ -148,7 +148,7 @@ static int sh_sci_spi_probe(struct platform_device *dev) ret = -ENOENT; goto err1; } - sp->membase = ioremap(r->start, r->end - r->start + 1); + sp->membase = ioremap(r->start, resource_size(r)); if (!sp->membase) { ret = -ENXIO; goto err1; -- GitLab From d53342bf9616ecd7e4a03fece167d0f53b195e87 Mon Sep 17 00:00:00 2001 From: hartleys Date: Mon, 14 Dec 2009 22:43:42 +0000 Subject: [PATCH 350/618] spi: spi_txx9.c: use resource_size() Signed-off-by: H Hartley Sweeten Cc: David Brownell Cc: Atsushi Nemoto Signed-off-by: Grant Likely --- drivers/spi/spi_txx9.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c index 96057de133ad..c166eb5ad3c5 100644 --- a/drivers/spi/spi_txx9.c +++ b/drivers/spi/spi_txx9.c @@ -376,12 +376,10 @@ static int __init txx9spi_probe(struct platform_device *dev) res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res) goto exit_busy; - if (!devm_request_mem_region(&dev->dev, - res->start, res->end - res->start + 1, + if (!devm_request_mem_region(&dev->dev, res->start, resource_size(res), "spi_txx9")) goto exit_busy; - c->membase = devm_ioremap(&dev->dev, - res->start, res->end - res->start + 1); + c->membase = devm_ioremap(&dev->dev, res->start, resource_size(res)); if (!c->membase) goto exit_busy; -- GitLab From 76b7e0058d09f8104387980a690001681c04cc0a Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 17 Dec 2009 14:24:20 +0100 Subject: [PATCH 351/618] fix up O_SYNC comments Proper Posix O_SYNC handling only made it into 2.6.33, not 2.6.32. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- arch/alpha/include/asm/fcntl.h | 2 +- arch/mips/include/asm/fcntl.h | 2 +- arch/sparc/include/asm/fcntl.h | 2 +- include/asm-generic/fcntl.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h index 21b1117a0c61..70145cbb21cb 100644 --- a/arch/alpha/include/asm/fcntl.h +++ b/arch/alpha/include/asm/fcntl.h @@ -16,7 +16,7 @@ #define O_NOATIME 04000000 #define O_CLOEXEC 010000000 /* set close_on_exec */ /* - * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using + * Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using * the O_SYNC flag. We continue to use the existing numerical value * for O_DSYNC semantics now, but using the correct symbolic name for it. * This new value is used to request true Posix O_SYNC semantics. It is diff --git a/arch/mips/include/asm/fcntl.h b/arch/mips/include/asm/fcntl.h index 7c6681aa2ab8..e482fe90fe88 100644 --- a/arch/mips/include/asm/fcntl.h +++ b/arch/mips/include/asm/fcntl.h @@ -19,7 +19,7 @@ #define FASYNC 0x1000 /* fcntl, for BSD compatibility */ #define O_LARGEFILE 0x2000 /* allow large file opens */ /* - * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using + * Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using * the O_SYNC flag. We continue to use the existing numerical value * for O_DSYNC semantics now, but using the correct symbolic name for it. * This new value is used to request true Posix O_SYNC semantics. It is diff --git a/arch/sparc/include/asm/fcntl.h b/arch/sparc/include/asm/fcntl.h index 3b9cfb39175e..38f37b333cc7 100644 --- a/arch/sparc/include/asm/fcntl.h +++ b/arch/sparc/include/asm/fcntl.h @@ -19,7 +19,7 @@ #define O_NOATIME 0x200000 #define O_CLOEXEC 0x400000 /* - * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using + * Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using * the O_SYNC flag. We continue to use the existing numerical value * for O_DSYNC semantics now, but using the correct symbolic name for it. * This new value is used to request true Posix O_SYNC semantics. It is diff --git a/include/asm-generic/fcntl.h b/include/asm-generic/fcntl.h index 681ddf3e844c..fcd268ce0674 100644 --- a/include/asm-generic/fcntl.h +++ b/include/asm-generic/fcntl.h @@ -51,7 +51,7 @@ #endif /* - * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using + * Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using * the O_SYNC flag. We continue to use the existing numerical value * for O_DSYNC semantics now, but using the correct symbolic name for it. * This new value is used to request true Posix O_SYNC semantics. It is -- GitLab From 7a0ad10c367ab57c899d340372f37880cbe6ab52 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 17 Dec 2009 14:24:40 +0100 Subject: [PATCH 352/618] fold do_sync_file_range into sys_sync_file_range We recently go rid of all callers of do_sync_file_range as they're better served with vfs_fsync or the filemap_write_and_wait. Now that do_sync_file_range is down to a single caller fold it into it so that people don't start using it again accidentally. While at it also switch it from using __filemap_fdatawrite_range(..., WB_SYNC_ALL) to the more clear filemap_fdatawrite_range(). Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/sync.c | 59 ++++++++++++++++++---------------------------- include/linux/fs.h | 4 ---- 2 files changed, 23 insertions(+), 40 deletions(-) diff --git a/fs/sync.c b/fs/sync.c index 36752a683481..418727a2a239 100644 --- a/fs/sync.c +++ b/fs/sync.c @@ -355,6 +355,7 @@ SYSCALL_DEFINE(sync_file_range)(int fd, loff_t offset, loff_t nbytes, { int ret; struct file *file; + struct address_space *mapping; loff_t endbyte; /* inclusive */ int fput_needed; umode_t i_mode; @@ -405,7 +406,28 @@ SYSCALL_DEFINE(sync_file_range)(int fd, loff_t offset, loff_t nbytes, !S_ISLNK(i_mode)) goto out_put; - ret = do_sync_mapping_range(file->f_mapping, offset, endbyte, flags); + mapping = file->f_mapping; + if (!mapping) { + ret = -EINVAL; + goto out_put; + } + + ret = 0; + if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) { + ret = filemap_fdatawait_range(mapping, offset, endbyte); + if (ret < 0) + goto out_put; + } + + if (flags & SYNC_FILE_RANGE_WRITE) { + ret = filemap_fdatawrite_range(mapping, offset, endbyte); + if (ret < 0) + goto out_put; + } + + if (flags & SYNC_FILE_RANGE_WAIT_AFTER) + ret = filemap_fdatawait_range(mapping, offset, endbyte); + out_put: fput_light(file, fput_needed); out: @@ -437,38 +459,3 @@ asmlinkage long SyS_sync_file_range2(long fd, long flags, } SYSCALL_ALIAS(sys_sync_file_range2, SyS_sync_file_range2); #endif - -/* - * `endbyte' is inclusive - */ -int do_sync_mapping_range(struct address_space *mapping, loff_t offset, - loff_t endbyte, unsigned int flags) -{ - int ret; - - if (!mapping) { - ret = -EINVAL; - goto out; - } - - ret = 0; - if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) { - ret = filemap_fdatawait_range(mapping, offset, endbyte); - if (ret < 0) - goto out; - } - - if (flags & SYNC_FILE_RANGE_WRITE) { - ret = __filemap_fdatawrite_range(mapping, offset, endbyte, - WB_SYNC_ALL); - if (ret < 0) - goto out; - } - - if (flags & SYNC_FILE_RANGE_WAIT_AFTER) { - ret = filemap_fdatawait_range(mapping, offset, endbyte); - } -out: - return ret; -} -EXPORT_SYMBOL_GPL(do_sync_mapping_range); diff --git a/include/linux/fs.h b/include/linux/fs.h index 66bc0a54b284..77a975089d9a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1095,10 +1095,6 @@ struct file_lock { extern void send_sigio(struct fown_struct *fown, int fd, int band); -/* fs/sync.c */ -extern int do_sync_mapping_range(struct address_space *mapping, loff_t offset, - loff_t endbyte, unsigned int flags); - #ifdef CONFIG_FILE_LOCKING extern int fcntl_getlk(struct file *, struct flock __user *); extern int fcntl_setlk(unsigned int, struct file *, unsigned int, -- GitLab From eaff8079d4f1016a12e34ab323737314f24127dd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 17 Dec 2009 14:25:01 +0100 Subject: [PATCH 353/618] kill I_LOCK After I_SYNC was split from I_LOCK the leftover is always used together with I_NEW and thus superflous. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/gfs2/inode.c | 2 +- fs/inode.c | 26 +++++++++++++------------- fs/jfs/jfs_txnmgr.c | 2 +- fs/ntfs/inode.c | 6 +++--- fs/ubifs/file.c | 2 +- fs/xfs/linux-2.6/xfs_iops.c | 2 +- fs/xfs/xfs_iget.c | 4 ++-- include/linux/fs.h | 36 ++++++++++++++++-------------------- include/linux/writeback.h | 3 +-- 9 files changed, 39 insertions(+), 44 deletions(-) diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index 3ff32fa793da..6e220f4eee7d 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -125,7 +125,7 @@ static struct inode *gfs2_iget_skip(struct super_block *sb, * directory entry when gfs2_inode_lookup() is invoked. Part of the code * segment inside gfs2_inode_lookup code needs to get moved around. * - * Clean up I_LOCK and I_NEW as well. + * Clears I_NEW as well. **/ void gfs2_set_iop(struct inode *inode) diff --git a/fs/inode.c b/fs/inode.c index 06c1f02de611..03dfeb2e3928 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -113,7 +113,7 @@ static void wake_up_inode(struct inode *inode) * Prevent speculative execution through spin_unlock(&inode_lock); */ smp_mb(); - wake_up_bit(&inode->i_state, __I_LOCK); + wake_up_bit(&inode->i_state, __I_NEW); } /** @@ -690,17 +690,17 @@ void unlock_new_inode(struct inode *inode) } #endif /* - * This is special! We do not need the spinlock when clearing I_LOCK, + * This is special! We do not need the spinlock when clearing I_NEW, * because we're guaranteed that nobody else tries to do anything about * the state of the inode when it is locked, as we just created it (so - * there can be no old holders that haven't tested I_LOCK). + * there can be no old holders that haven't tested I_NEW). * However we must emit the memory barrier so that other CPUs reliably - * see the clearing of I_LOCK after the other inode initialisation has + * see the clearing of I_NEW after the other inode initialisation has * completed. */ smp_mb(); - WARN_ON((inode->i_state & (I_LOCK|I_NEW)) != (I_LOCK|I_NEW)); - inode->i_state &= ~(I_LOCK|I_NEW); + WARN_ON(!(inode->i_state & I_NEW)); + inode->i_state &= ~I_NEW; wake_up_inode(inode); } EXPORT_SYMBOL(unlock_new_inode); @@ -731,7 +731,7 @@ static struct inode *get_new_inode(struct super_block *sb, goto set_failed; __inode_add_to_lists(sb, head, inode); - inode->i_state = I_LOCK|I_NEW; + inode->i_state = I_NEW; spin_unlock(&inode_lock); /* Return the locked inode with I_NEW set, the @@ -778,7 +778,7 @@ static struct inode *get_new_inode_fast(struct super_block *sb, if (!old) { inode->i_ino = ino; __inode_add_to_lists(sb, head, inode); - inode->i_state = I_LOCK|I_NEW; + inode->i_state = I_NEW; spin_unlock(&inode_lock); /* Return the locked inode with I_NEW set, the @@ -1083,7 +1083,7 @@ int insert_inode_locked(struct inode *inode) ino_t ino = inode->i_ino; struct hlist_head *head = inode_hashtable + hash(sb, ino); - inode->i_state |= I_LOCK|I_NEW; + inode->i_state |= I_NEW; while (1) { struct hlist_node *node; struct inode *old = NULL; @@ -1120,7 +1120,7 @@ int insert_inode_locked4(struct inode *inode, unsigned long hashval, struct super_block *sb = inode->i_sb; struct hlist_head *head = inode_hashtable + hash(sb, hashval); - inode->i_state |= I_LOCK|I_NEW; + inode->i_state |= I_NEW; while (1) { struct hlist_node *node; @@ -1510,7 +1510,7 @@ EXPORT_SYMBOL(inode_wait); * until the deletion _might_ have completed. Callers are responsible * to recheck inode state. * - * It doesn't matter if I_LOCK is not set initially, a call to + * It doesn't matter if I_NEW is not set initially, a call to * wake_up_inode() after removing from the hash list will DTRT. * * This is called with inode_lock held. @@ -1518,8 +1518,8 @@ EXPORT_SYMBOL(inode_wait); static void __wait_on_freeing_inode(struct inode *inode) { wait_queue_head_t *wq; - DEFINE_WAIT_BIT(wait, &inode->i_state, __I_LOCK); - wq = bit_waitqueue(&inode->i_state, __I_LOCK); + DEFINE_WAIT_BIT(wait, &inode->i_state, __I_NEW); + wq = bit_waitqueue(&inode->i_state, __I_NEW); prepare_to_wait(wq, &wait.wait, TASK_UNINTERRUPTIBLE); spin_unlock(&inode_lock); schedule(); diff --git a/fs/jfs/jfs_txnmgr.c b/fs/jfs/jfs_txnmgr.c index f26e4d03ada5..d945ea76b445 100644 --- a/fs/jfs/jfs_txnmgr.c +++ b/fs/jfs/jfs_txnmgr.c @@ -1292,7 +1292,7 @@ int txCommit(tid_t tid, /* transaction identifier */ */ /* * I believe this code is no longer needed. Splitting I_LOCK - * into two bits, I_LOCK and I_SYNC should prevent this + * into two bits, I_NEW and I_SYNC should prevent this * deadlock as well. But since I don't have a JFS testload * to verify this, only a trivial s/I_LOCK/I_SYNC/ was done. * Joern diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c index 9938034762cc..dc2505abb6d7 100644 --- a/fs/ntfs/inode.c +++ b/fs/ntfs/inode.c @@ -530,7 +530,7 @@ static int ntfs_is_extended_system_file(ntfs_attr_search_ctx *ctx) * the ntfs inode. * * Q: What locks are held when the function is called? - * A: i_state has I_LOCK set, hence the inode is locked, also + * A: i_state has I_NEW set, hence the inode is locked, also * i_count is set to 1, so it is not going to go away * i_flags is set to 0 and we have no business touching it. Only an ioctl() * is allowed to write to them. We should of course be honouring them but @@ -1207,7 +1207,7 @@ static int ntfs_read_locked_inode(struct inode *vi) * necessary fields in @vi as well as initializing the ntfs inode. * * Q: What locks are held when the function is called? - * A: i_state has I_LOCK set, hence the inode is locked, also + * A: i_state has I_NEW set, hence the inode is locked, also * i_count is set to 1, so it is not going to go away * * Return 0 on success and -errno on error. In the error case, the inode will @@ -1474,7 +1474,7 @@ static int ntfs_read_locked_attr_inode(struct inode *base_vi, struct inode *vi) * normal directory inodes. * * Q: What locks are held when the function is called? - * A: i_state has I_LOCK set, hence the inode is locked, also + * A: i_state has I_NEW set, hence the inode is locked, also * i_count is set to 1, so it is not going to go away * * Return 0 on success and -errno on error. In the error case, the inode will diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c index 39849f887e72..16a6444330ec 100644 --- a/fs/ubifs/file.c +++ b/fs/ubifs/file.c @@ -45,7 +45,7 @@ * * Similarly, @i_mutex is not always locked in 'ubifs_readpage()', e.g., the * read-ahead path does not lock it ("sys_read -> generic_file_aio_read -> - * ondemand_readahead -> readpage"). In case of readahead, @I_LOCK flag is not + * ondemand_readahead -> readpage"). In case of readahead, @I_SYNC flag is not * set as well. However, UBIFS disables readahead. */ diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 1d5b298ba8b2..225946012d0b 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -794,7 +794,7 @@ xfs_setup_inode( struct inode *inode = &ip->i_vnode; inode->i_ino = ip->i_ino; - inode->i_state = I_NEW|I_LOCK; + inode->i_state = I_NEW; inode_add_to_lists(ip->i_mount->m_super, inode); inode->i_mode = ip->i_d.di_mode; diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c index 0de36c2a46f1..fa402a6bbbcf 100644 --- a/fs/xfs/xfs_iget.c +++ b/fs/xfs/xfs_iget.c @@ -91,7 +91,7 @@ xfs_inode_alloc( ip->i_new_size = 0; /* prevent anyone from using this yet */ - VFS_I(ip)->i_state = I_NEW|I_LOCK; + VFS_I(ip)->i_state = I_NEW; return ip; } @@ -217,7 +217,7 @@ xfs_iget_cache_hit( trace_xfs_iget_reclaim(ip); goto out_error; } - inode->i_state = I_LOCK|I_NEW; + inode->i_state = I_NEW; } else { /* If the VFS inode is being torn down, pause and try again. */ if (!igrab(inode)) { diff --git a/include/linux/fs.h b/include/linux/fs.h index 77a975089d9a..cca191933ff6 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1587,7 +1587,7 @@ struct super_operations { * until that flag is cleared. I_WILL_FREE, I_FREEING and I_CLEAR are set at * various stages of removing an inode. * - * Two bits are used for locking and completion notification, I_LOCK and I_SYNC. + * Two bits are used for locking and completion notification, I_NEW and I_SYNC. * * I_DIRTY_SYNC Inode is dirty, but doesn't have to be written on * fdatasync(). i_atime is the usual cause. @@ -1596,8 +1596,14 @@ struct super_operations { * don't have to write inode on fdatasync() when only * mtime has changed in it. * I_DIRTY_PAGES Inode has dirty pages. Inode itself may be clean. - * I_NEW get_new_inode() sets i_state to I_LOCK|I_NEW. Both - * are cleared by unlock_new_inode(), called from iget(). + * I_NEW Serves as both a mutex and completion notification. + * New inodes set I_NEW. If two processes both create + * the same inode, one of them will release its inode and + * wait for I_NEW to be released before returning. + * Inodes in I_WILL_FREE, I_FREEING or I_CLEAR state can + * also cause waiting on I_NEW, without I_NEW actually + * being set. find_inode() uses this to prevent returning + * nearly-dead inodes. * I_WILL_FREE Must be set when calling write_inode_now() if i_count * is zero. I_FREEING must be set when I_WILL_FREE is * cleared. @@ -1611,20 +1617,11 @@ struct super_operations { * prohibited for many purposes. iget() must wait for * the inode to be completely released, then create it * anew. Other functions will just ignore such inodes, - * if appropriate. I_LOCK is used for waiting. + * if appropriate. I_NEW is used for waiting. * - * I_LOCK Serves as both a mutex and completion notification. - * New inodes set I_LOCK. If two processes both create - * the same inode, one of them will release its inode and - * wait for I_LOCK to be released before returning. - * Inodes in I_WILL_FREE, I_FREEING or I_CLEAR state can - * also cause waiting on I_LOCK, without I_LOCK actually - * being set. find_inode() uses this to prevent returning - * nearly-dead inodes. - * I_SYNC Similar to I_LOCK, but limited in scope to writeback - * of inode dirty data. Having a separate lock for this - * purpose reduces latency and prevents some filesystem- - * specific deadlocks. + * I_SYNC Synchonized write of dirty inode data. The bits is + * set during data writeback, and cleared with a wakeup + * on the bit address once it is done. * * Q: What is the difference between I_WILL_FREE and I_FREEING? * Q: igrab() only checks on (I_FREEING|I_WILL_FREE). Should it also check on @@ -1633,13 +1630,12 @@ struct super_operations { #define I_DIRTY_SYNC 1 #define I_DIRTY_DATASYNC 2 #define I_DIRTY_PAGES 4 -#define I_NEW 8 +#define __I_NEW 3 +#define I_NEW (1 << __I_NEW) #define I_WILL_FREE 16 #define I_FREEING 32 #define I_CLEAR 64 -#define __I_LOCK 7 -#define I_LOCK (1 << __I_LOCK) -#define __I_SYNC 8 +#define __I_SYNC 7 #define I_SYNC (1 << __I_SYNC) #define I_DIRTY (I_DIRTY_SYNC | I_DIRTY_DATASYNC | I_DIRTY_PAGES) diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 705f01fe413a..c18c008f4bbf 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -79,8 +79,7 @@ void wakeup_flusher_threads(long nr_pages); static inline void wait_on_inode(struct inode *inode) { might_sleep(); - wait_on_bit(&inode->i_state, __I_LOCK, inode_wait, - TASK_UNINTERRUPTIBLE); + wait_on_bit(&inode->i_state, __I_NEW, inode_wait, TASK_UNINTERRUPTIBLE); } static inline void inode_sync_wait(struct inode *inode) { -- GitLab From c216775458a2ee345d9412a2770c2916acfb5d30 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 12 Nov 2009 09:34:21 +0000 Subject: [PATCH 354/618] Btrfs: Fix disk_i_size update corner case There are some cases file extents are inserted without involving ordered struct. In these cases, we update disk_i_size directly, without checking pending ordered extent and DELALLOC bit. This patch extends btrfs_ordered_update_i_size() to handle these cases. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/btrfs_inode.h | 5 +- fs/btrfs/inode.c | 71 ++++++++++++++++----------- fs/btrfs/ordered-data.c | 105 +++++++++++++++++++++++++++++++--------- fs/btrfs/ordered-data.h | 2 +- 4 files changed, 127 insertions(+), 56 deletions(-) diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h index f6783a42f010..3f1f50d9d916 100644 --- a/fs/btrfs/btrfs_inode.h +++ b/fs/btrfs/btrfs_inode.h @@ -44,9 +44,6 @@ struct btrfs_inode { */ struct extent_io_tree io_failure_tree; - /* held while inesrting or deleting extents from files */ - struct mutex extent_mutex; - /* held while logging the inode in tree-log.c */ struct mutex log_mutex; @@ -166,7 +163,7 @@ static inline struct btrfs_inode *BTRFS_I(struct inode *inode) static inline void btrfs_i_size_write(struct inode *inode, u64 size) { - inode->i_size = size; + i_size_write(inode, size); BTRFS_I(inode)->disk_i_size = size; } diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index ef250be49cdb..fa57247887e3 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -188,8 +188,18 @@ static noinline int insert_inline_extent(struct btrfs_trans_handle *trans, btrfs_mark_buffer_dirty(leaf); btrfs_free_path(path); + /* + * we're an inline extent, so nobody can + * extend the file past i_size without locking + * a page we already have locked. + * + * We must do any isize and inode updates + * before we unlock the pages. Otherwise we + * could end up racing with unlink. + */ BTRFS_I(inode)->disk_i_size = inode->i_size; btrfs_update_inode(trans, root, inode); + return 0; fail: btrfs_free_path(path); @@ -415,7 +425,6 @@ static noinline int compress_file_range(struct inode *inode, start, end, total_compressed, pages); } - btrfs_end_transaction(trans, root); if (ret == 0) { /* * inline extent creation worked, we don't need @@ -429,9 +438,11 @@ static noinline int compress_file_range(struct inode *inode, EXTENT_CLEAR_DELALLOC | EXTENT_CLEAR_ACCOUNTING | EXTENT_SET_WRITEBACK | EXTENT_END_WRITEBACK); - ret = 0; + + btrfs_end_transaction(trans, root); goto free_pages_out; } + btrfs_end_transaction(trans, root); } if (will_compress) { @@ -542,7 +553,6 @@ static noinline int submit_compressed_extents(struct inode *inode, if (list_empty(&async_cow->extents)) return 0; - trans = btrfs_join_transaction(root, 1); while (!list_empty(&async_cow->extents)) { async_extent = list_entry(async_cow->extents.next, @@ -589,19 +599,15 @@ static noinline int submit_compressed_extents(struct inode *inode, lock_extent(io_tree, async_extent->start, async_extent->start + async_extent->ram_size - 1, GFP_NOFS); - /* - * here we're doing allocation and writeback of the - * compressed pages - */ - btrfs_drop_extent_cache(inode, async_extent->start, - async_extent->start + - async_extent->ram_size - 1, 0); + trans = btrfs_join_transaction(root, 1); ret = btrfs_reserve_extent(trans, root, async_extent->compressed_size, async_extent->compressed_size, 0, alloc_hint, (u64)-1, &ins, 1); + btrfs_end_transaction(trans, root); + if (ret) { int i; for (i = 0; i < async_extent->nr_pages; i++) { @@ -617,6 +623,14 @@ static noinline int submit_compressed_extents(struct inode *inode, goto retry; } + /* + * here we're doing allocation and writeback of the + * compressed pages + */ + btrfs_drop_extent_cache(inode, async_extent->start, + async_extent->start + + async_extent->ram_size - 1, 0); + em = alloc_extent_map(GFP_NOFS); em->start = async_extent->start; em->len = async_extent->ram_size; @@ -648,8 +662,6 @@ static noinline int submit_compressed_extents(struct inode *inode, BTRFS_ORDERED_COMPRESSED); BUG_ON(ret); - btrfs_end_transaction(trans, root); - /* * clear dirty, set writeback and unlock the pages. */ @@ -671,13 +683,11 @@ static noinline int submit_compressed_extents(struct inode *inode, async_extent->nr_pages); BUG_ON(ret); - trans = btrfs_join_transaction(root, 1); alloc_hint = ins.objectid + ins.offset; kfree(async_extent); cond_resched(); } - btrfs_end_transaction(trans, root); return 0; } @@ -741,6 +751,7 @@ static noinline int cow_file_range(struct inode *inode, EXTENT_CLEAR_DIRTY | EXTENT_SET_WRITEBACK | EXTENT_END_WRITEBACK); + *nr_written = *nr_written + (end - start + PAGE_CACHE_SIZE) / PAGE_CACHE_SIZE; *page_started = 1; @@ -1727,18 +1738,27 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) } } - trans = btrfs_join_transaction(root, 1); - if (!ordered_extent) ordered_extent = btrfs_lookup_ordered_extent(inode, start); BUG_ON(!ordered_extent); - if (test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) - goto nocow; + if (test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) { + BUG_ON(!list_empty(&ordered_extent->list)); + ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent); + if (!ret) { + trans = btrfs_join_transaction(root, 1); + ret = btrfs_update_inode(trans, root, inode); + BUG_ON(ret); + btrfs_end_transaction(trans, root); + } + goto out; + } lock_extent(io_tree, ordered_extent->file_offset, ordered_extent->file_offset + ordered_extent->len - 1, GFP_NOFS); + trans = btrfs_join_transaction(root, 1); + if (test_bit(BTRFS_ORDERED_COMPRESSED, &ordered_extent->flags)) compressed = 1; if (test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) { @@ -1765,22 +1785,20 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) unlock_extent(io_tree, ordered_extent->file_offset, ordered_extent->file_offset + ordered_extent->len - 1, GFP_NOFS); -nocow: add_pending_csums(trans, inode, ordered_extent->file_offset, &ordered_extent->list); - mutex_lock(&BTRFS_I(inode)->extent_mutex); - btrfs_ordered_update_i_size(inode, ordered_extent); - btrfs_update_inode(trans, root, inode); - btrfs_remove_ordered_extent(inode, ordered_extent); - mutex_unlock(&BTRFS_I(inode)->extent_mutex); - + /* this also removes the ordered extent from the tree */ + btrfs_ordered_update_i_size(inode, 0, ordered_extent); + ret = btrfs_update_inode(trans, root, inode); + BUG_ON(ret); + btrfs_end_transaction(trans, root); +out: /* once for us */ btrfs_put_ordered_extent(ordered_extent); /* once for the tree */ btrfs_put_ordered_extent(ordered_extent); - btrfs_end_transaction(trans, root); return 0; } @@ -3562,7 +3580,6 @@ static noinline void init_btrfs_i(struct inode *inode) INIT_LIST_HEAD(&BTRFS_I(inode)->ordered_operations); RB_CLEAR_NODE(&BTRFS_I(inode)->rb_node); btrfs_ordered_inode_tree_init(&BTRFS_I(inode)->ordered_tree); - mutex_init(&BTRFS_I(inode)->extent_mutex); mutex_init(&BTRFS_I(inode)->log_mutex); } diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index 5799bc46a309..9b16073bb875 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -291,16 +291,16 @@ int btrfs_put_ordered_extent(struct btrfs_ordered_extent *entry) /* * remove an ordered extent from the tree. No references are dropped - * but, anyone waiting on this extent is woken up. + * and you must wake_up entry->wait. You must hold the tree mutex + * while you call this function. */ -int btrfs_remove_ordered_extent(struct inode *inode, +static int __btrfs_remove_ordered_extent(struct inode *inode, struct btrfs_ordered_extent *entry) { struct btrfs_ordered_inode_tree *tree; struct rb_node *node; tree = &BTRFS_I(inode)->ordered_tree; - mutex_lock(&tree->mutex); node = &entry->rb_node; rb_erase(node, &tree->tree); tree->last = NULL; @@ -326,9 +326,26 @@ int btrfs_remove_ordered_extent(struct inode *inode, } spin_unlock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock); + return 0; +} + +/* + * remove an ordered extent from the tree. No references are dropped + * but any waiters are woken. + */ +int btrfs_remove_ordered_extent(struct inode *inode, + struct btrfs_ordered_extent *entry) +{ + struct btrfs_ordered_inode_tree *tree; + int ret; + + tree = &BTRFS_I(inode)->ordered_tree; + mutex_lock(&tree->mutex); + ret = __btrfs_remove_ordered_extent(inode, entry); mutex_unlock(&tree->mutex); wake_up(&entry->wait); - return 0; + + return ret; } /* @@ -589,7 +606,7 @@ btrfs_lookup_first_ordered_extent(struct inode *inode, u64 file_offset) * After an extent is done, call this to conditionally update the on disk * i_size. i_size is updated to cover any fully written part of the file. */ -int btrfs_ordered_update_i_size(struct inode *inode, +int btrfs_ordered_update_i_size(struct inode *inode, u64 offset, struct btrfs_ordered_extent *ordered) { struct btrfs_ordered_inode_tree *tree = &BTRFS_I(inode)->ordered_tree; @@ -597,18 +614,30 @@ int btrfs_ordered_update_i_size(struct inode *inode, u64 disk_i_size; u64 new_i_size; u64 i_size_test; + u64 i_size = i_size_read(inode); struct rb_node *node; + struct rb_node *prev = NULL; struct btrfs_ordered_extent *test; + int ret = 1; + + if (ordered) + offset = entry_end(ordered); mutex_lock(&tree->mutex); disk_i_size = BTRFS_I(inode)->disk_i_size; + /* truncate file */ + if (disk_i_size > i_size) { + BTRFS_I(inode)->disk_i_size = i_size; + ret = 0; + goto out; + } + /* * if the disk i_size is already at the inode->i_size, or * this ordered extent is inside the disk i_size, we're done */ - if (disk_i_size >= inode->i_size || - ordered->file_offset + ordered->len <= disk_i_size) { + if (disk_i_size == i_size || offset <= disk_i_size) { goto out; } @@ -616,8 +645,7 @@ int btrfs_ordered_update_i_size(struct inode *inode, * we can't update the disk_isize if there are delalloc bytes * between disk_i_size and this ordered extent */ - if (test_range_bit(io_tree, disk_i_size, - ordered->file_offset + ordered->len - 1, + if (test_range_bit(io_tree, disk_i_size, offset - 1, EXTENT_DELALLOC, 0, NULL)) { goto out; } @@ -626,20 +654,32 @@ int btrfs_ordered_update_i_size(struct inode *inode, * if we find an ordered extent then we can't update disk i_size * yet */ - node = &ordered->rb_node; - while (1) { - node = rb_prev(node); - if (!node) - break; + if (ordered) { + node = rb_prev(&ordered->rb_node); + } else { + prev = tree_search(tree, offset); + /* + * we insert file extents without involving ordered struct, + * so there should be no ordered struct cover this offset + */ + if (prev) { + test = rb_entry(prev, struct btrfs_ordered_extent, + rb_node); + BUG_ON(offset_in_entry(test, offset)); + } + node = prev; + } + while (node) { test = rb_entry(node, struct btrfs_ordered_extent, rb_node); if (test->file_offset + test->len <= disk_i_size) break; - if (test->file_offset >= inode->i_size) + if (test->file_offset >= i_size) break; if (test->file_offset >= disk_i_size) goto out; + node = rb_prev(node); } - new_i_size = min_t(u64, entry_end(ordered), i_size_read(inode)); + new_i_size = min_t(u64, offset, i_size); /* * at this point, we know we can safely update i_size to at least @@ -647,7 +687,14 @@ int btrfs_ordered_update_i_size(struct inode *inode, * walk forward and see if ios from higher up in the file have * finished. */ - node = rb_next(&ordered->rb_node); + if (ordered) { + node = rb_next(&ordered->rb_node); + } else { + if (prev) + node = rb_next(prev); + else + node = rb_first(&tree->tree); + } i_size_test = 0; if (node) { /* @@ -655,10 +702,10 @@ int btrfs_ordered_update_i_size(struct inode *inode, * between our ordered extent and the next one. */ test = rb_entry(node, struct btrfs_ordered_extent, rb_node); - if (test->file_offset > entry_end(ordered)) + if (test->file_offset > offset) i_size_test = test->file_offset; } else { - i_size_test = i_size_read(inode); + i_size_test = i_size; } /* @@ -667,15 +714,25 @@ int btrfs_ordered_update_i_size(struct inode *inode, * are no delalloc bytes in this area, it is safe to update * disk_i_size to the end of the region. */ - if (i_size_test > entry_end(ordered) && - !test_range_bit(io_tree, entry_end(ordered), i_size_test - 1, - EXTENT_DELALLOC, 0, NULL)) { - new_i_size = min_t(u64, i_size_test, i_size_read(inode)); + if (i_size_test > offset && + !test_range_bit(io_tree, offset, i_size_test - 1, + EXTENT_DELALLOC, 0, NULL)) { + new_i_size = min_t(u64, i_size_test, i_size); } BTRFS_I(inode)->disk_i_size = new_i_size; + ret = 0; out: + /* + * we need to remove the ordered extent with the tree lock held + * so that other people calling this function don't find our fully + * processed ordered entry and skip updating the i_size + */ + if (ordered) + __btrfs_remove_ordered_extent(inode, ordered); mutex_unlock(&tree->mutex); - return 0; + if (ordered) + wake_up(&ordered->wait); + return ret; } /* diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h index f82e87488ca8..4fa20398aec1 100644 --- a/fs/btrfs/ordered-data.h +++ b/fs/btrfs/ordered-data.h @@ -150,7 +150,7 @@ void btrfs_start_ordered_extent(struct inode *inode, int btrfs_wait_ordered_range(struct inode *inode, u64 start, u64 len); struct btrfs_ordered_extent * btrfs_lookup_first_ordered_extent(struct inode * inode, u64 file_offset); -int btrfs_ordered_update_i_size(struct inode *inode, +int btrfs_ordered_update_i_size(struct inode *inode, u64 offset, struct btrfs_ordered_extent *ordered); int btrfs_find_ordered_sum(struct inode *inode, u64 offset, u64 disk_bytenr, u32 *sum); int btrfs_wait_ordered_extents(struct btrfs_root *root, int nocow_only); -- GitLab From c71bf099abddf3e0fdc27f251ba76fca1461d49a Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 12 Nov 2009 09:34:40 +0000 Subject: [PATCH 355/618] Btrfs: Avoid orphan inodes cleanup while replaying log We do log replay in a single transaction, so it's not good to do unbound operations. This patch cleans up orphan inodes cleanup after replaying the log. It also avoids doing other unbound operations such as truncating a file during replaying log. These unbound operations are postponed to the orphan inode cleanup stage. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 5 +++-- fs/btrfs/disk-io.c | 17 +++++++++------ fs/btrfs/inode.c | 19 ++++++++++++++--- fs/btrfs/relocation.c | 1 + fs/btrfs/tree-log.c | 49 +++++++++++++++++++++---------------------- 5 files changed, 55 insertions(+), 36 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index ae5b0aaa9386..fcfbefbbb685 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -859,8 +859,9 @@ struct btrfs_fs_info { struct mutex ordered_operations_mutex; struct rw_semaphore extent_commit_sem; - struct rw_semaphore subvol_sem; + struct rw_semaphore cleanup_work_sem; + struct rw_semaphore subvol_sem; struct srcu_struct subvol_srcu; struct list_head trans_list; @@ -1034,12 +1035,12 @@ struct btrfs_root { int ref_cows; int track_dirty; int in_radix; + int clean_orphans; u64 defrag_trans_start; struct btrfs_key defrag_progress; struct btrfs_key defrag_max; int defrag_running; - int defrag_level; char *name; int in_sysfs; diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 101940fab9b3..c1e59e33f020 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -892,6 +892,8 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize, root->stripesize = stripesize; root->ref_cows = 0; root->track_dirty = 0; + root->in_radix = 0; + root->clean_orphans = 0; root->fs_info = fs_info; root->objectid = objectid; @@ -928,7 +930,6 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize, root->defrag_trans_start = fs_info->generation; init_completion(&root->kobj_unregister); root->defrag_running = 0; - root->defrag_level = 0; root->root_key.objectid = objectid; root->anon_super.s_root = NULL; root->anon_super.s_dev = 0; @@ -1210,8 +1211,10 @@ struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, ret = radix_tree_insert(&fs_info->fs_roots_radix, (unsigned long)root->root_key.objectid, root); - if (ret == 0) + if (ret == 0) { root->in_radix = 1; + root->clean_orphans = 1; + } spin_unlock(&fs_info->fs_roots_radix_lock); radix_tree_preload_end(); if (ret) { @@ -1225,10 +1228,6 @@ struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, ret = btrfs_find_dead_roots(fs_info->tree_root, root->root_key.objectid); WARN_ON(ret); - - if (!(fs_info->sb->s_flags & MS_RDONLY)) - btrfs_orphan_cleanup(root); - return root; fail: free_fs_root(root); @@ -1689,6 +1688,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, mutex_init(&fs_info->cleaner_mutex); mutex_init(&fs_info->volume_mutex); init_rwsem(&fs_info->extent_commit_sem); + init_rwsem(&fs_info->cleanup_work_sem); init_rwsem(&fs_info->subvol_sem); btrfs_init_free_cluster(&fs_info->meta_alloc_cluster); @@ -2388,6 +2388,11 @@ int btrfs_commit_super(struct btrfs_root *root) mutex_lock(&root->fs_info->cleaner_mutex); btrfs_clean_old_snapshots(root); mutex_unlock(&root->fs_info->cleaner_mutex); + + /* wait until ongoing cleanup work done */ + down_write(&root->fs_info->cleanup_work_sem); + up_write(&root->fs_info->cleanup_work_sem); + trans = btrfs_start_transaction(root, 1); ret = btrfs_commit_transaction(trans, root); BUG_ON(ret); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index fa57247887e3..eb2db3bde236 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2093,16 +2093,17 @@ void btrfs_orphan_cleanup(struct btrfs_root *root) struct inode *inode; int ret = 0, nr_unlink = 0, nr_truncate = 0; - path = btrfs_alloc_path(); - if (!path) + if (!xchg(&root->clean_orphans, 0)) return; + + path = btrfs_alloc_path(); + BUG_ON(!path); path->reada = -1; key.objectid = BTRFS_ORPHAN_OBJECTID; btrfs_set_key_type(&key, BTRFS_ORPHAN_ITEM_KEY); key.offset = (u64)-1; - while (1) { ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); if (ret < 0) { @@ -3298,6 +3299,11 @@ void btrfs_delete_inode(struct inode *inode) } btrfs_wait_ordered_range(inode, 0, (u64)-1); + if (root->fs_info->log_root_recovering) { + BUG_ON(!list_empty(&BTRFS_I(inode)->i_orphan)); + goto no_delete; + } + if (inode->i_nlink > 0) { BUG_ON(btrfs_root_refs(&root->root_item) != 0); goto no_delete; @@ -3705,6 +3711,13 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry) } srcu_read_unlock(&root->fs_info->subvol_srcu, index); + if (root != sub_root) { + down_read(&root->fs_info->cleanup_work_sem); + if (!(inode->i_sb->s_flags & MS_RDONLY)) + btrfs_orphan_cleanup(sub_root); + up_read(&root->fs_info->cleanup_work_sem); + } + return inode; } diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index cfcc93c93a7b..975fdd33ac41 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3755,6 +3755,7 @@ int btrfs_recover_relocation(struct btrfs_root *root) BTRFS_DATA_RELOC_TREE_OBJECTID); if (IS_ERR(fs_root)) err = PTR_ERR(fs_root); + btrfs_orphan_cleanup(fs_root); } return err; } diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 6bbaa10bb67e..4a9434b622ec 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -930,6 +930,17 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans, return 0; } +static int insert_orphan_item(struct btrfs_trans_handle *trans, + struct btrfs_root *root, u64 offset) +{ + int ret; + ret = btrfs_find_orphan_item(root, offset); + if (ret > 0) + ret = btrfs_insert_orphan_item(trans, root, offset); + return ret; +} + + /* * There are a few corners where the link count of the file can't * be properly maintained during replay. So, instead of adding @@ -997,9 +1008,13 @@ static noinline int fixup_inode_link_count(struct btrfs_trans_handle *trans, } BTRFS_I(inode)->index_cnt = (u64)-1; - if (inode->i_nlink == 0 && S_ISDIR(inode->i_mode)) { - ret = replay_dir_deletes(trans, root, NULL, path, - inode->i_ino, 1); + if (inode->i_nlink == 0) { + if (S_ISDIR(inode->i_mode)) { + ret = replay_dir_deletes(trans, root, NULL, path, + inode->i_ino, 1); + BUG_ON(ret); + } + ret = insert_orphan_item(trans, root, inode->i_ino); BUG_ON(ret); } btrfs_free_path(path); @@ -1587,7 +1602,6 @@ static int replay_one_buffer(struct btrfs_root *log, struct extent_buffer *eb, /* inode keys are done during the first stage */ if (key.type == BTRFS_INODE_ITEM_KEY && wc->stage == LOG_WALK_REPLAY_INODES) { - struct inode *inode; struct btrfs_inode_item *inode_item; u32 mode; @@ -1603,31 +1617,16 @@ static int replay_one_buffer(struct btrfs_root *log, struct extent_buffer *eb, eb, i, &key); BUG_ON(ret); - /* for regular files, truncate away - * extents past the new EOF + /* for regular files, make sure corresponding + * orhpan item exist. extents past the new EOF + * will be truncated later by orphan cleanup. */ if (S_ISREG(mode)) { - inode = read_one_inode(root, - key.objectid); - BUG_ON(!inode); - - ret = btrfs_truncate_inode_items(wc->trans, - root, inode, inode->i_size, - BTRFS_EXTENT_DATA_KEY); + ret = insert_orphan_item(wc->trans, root, + key.objectid); BUG_ON(ret); - - /* if the nlink count is zero here, the iput - * will free the inode. We bump it to make - * sure it doesn't get freed until the link - * count fixup is done - */ - if (inode->i_nlink == 0) { - btrfs_inc_nlink(inode); - btrfs_update_inode(wc->trans, - root, inode); - } - iput(inode); } + ret = link_to_fixup_dir(wc->trans, root, path, key.objectid); BUG_ON(ret); -- GitLab From 2e4bfab97055aa6acdd0637913bd705c2d6506d6 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 12 Nov 2009 09:37:02 +0000 Subject: [PATCH 356/618] Btrfs: Avoid orphan inodes cleanup during committing transaction btrfs_lookup_dentry may trigger orphan cleanup, so it's not good to call it while committing a transaction. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/ioctl.c | 29 +++++++++++++++++------------ fs/btrfs/transaction.c | 4 ---- 2 files changed, 17 insertions(+), 16 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index a1a8db8c149d..3d6b33871afe 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -237,7 +237,6 @@ static noinline int create_subvol(struct btrfs_root *root, u64 objectid; u64 new_dirid = BTRFS_FIRST_FREE_OBJECTID; u64 index = 0; - unsigned long nr = 1; /* * 1 - inode item @@ -342,24 +341,21 @@ static noinline int create_subvol(struct btrfs_root *root, d_instantiate(dentry, btrfs_lookup_dentry(dir, dentry)); fail: - nr = trans->blocks_used; err = btrfs_commit_transaction(trans, root); if (err && !ret) ret = err; btrfs_unreserve_metadata_space(root, 6); - btrfs_btree_balance_dirty(root, nr); return ret; } static int create_snapshot(struct btrfs_root *root, struct dentry *dentry, char *name, int namelen) { + struct inode *inode; struct btrfs_pending_snapshot *pending_snapshot; struct btrfs_trans_handle *trans; - int ret = 0; - int err; - unsigned long nr = 0; + int ret; if (!root->ref_cows) return -EINVAL; @@ -372,20 +368,20 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry, */ ret = btrfs_reserve_metadata_space(root, 6); if (ret) - goto fail_unlock; + goto fail; pending_snapshot = kzalloc(sizeof(*pending_snapshot), GFP_NOFS); if (!pending_snapshot) { ret = -ENOMEM; btrfs_unreserve_metadata_space(root, 6); - goto fail_unlock; + goto fail; } pending_snapshot->name = kmalloc(namelen + 1, GFP_NOFS); if (!pending_snapshot->name) { ret = -ENOMEM; kfree(pending_snapshot); btrfs_unreserve_metadata_space(root, 6); - goto fail_unlock; + goto fail; } memcpy(pending_snapshot->name, name, namelen); pending_snapshot->name[namelen] = '\0'; @@ -395,10 +391,19 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry, pending_snapshot->root = root; list_add(&pending_snapshot->list, &trans->transaction->pending_snapshots); - err = btrfs_commit_transaction(trans, root); + ret = btrfs_commit_transaction(trans, root); + BUG_ON(ret); + btrfs_unreserve_metadata_space(root, 6); -fail_unlock: - btrfs_btree_balance_dirty(root, nr); + inode = btrfs_lookup_dentry(dentry->d_parent->d_inode, dentry); + if (IS_ERR(inode)) { + ret = PTR_ERR(inode); + goto fail; + } + BUG_ON(!inode); + d_instantiate(dentry, inode); + ret = 0; +fail: return ret; } diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index b7b22c344b66..728e8fe5d2cc 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -796,7 +796,6 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, memcpy(&pending->root_key, &key, sizeof(key)); fail: kfree(new_root_item); - btrfs_unreserve_metadata_space(root, 6); return ret; } @@ -808,7 +807,6 @@ static noinline int finish_pending_snapshot(struct btrfs_fs_info *fs_info, u64 index = 0; struct btrfs_trans_handle *trans; struct inode *parent_inode; - struct inode *inode; struct btrfs_root *parent_root; parent_inode = pending->dentry->d_parent->d_inode; @@ -840,8 +838,6 @@ static noinline int finish_pending_snapshot(struct btrfs_fs_info *fs_info, BUG_ON(ret); - inode = btrfs_lookup_dentry(parent_inode, pending->dentry); - d_instantiate(pending->dentry, inode); fail: btrfs_end_transaction(trans, fs_info->fs_root); return ret; -- GitLab From 5a303d5d4b8055d2e5a03e92d04745bfc5881a22 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 12 Nov 2009 09:34:52 +0000 Subject: [PATCH 357/618] Btrfs: Make fallocate(2) more ENOSPC friendly fallocate(2) may allocate large number of file extents, so it's not good to do it in a single transaction. This patch make fallocate(2) start a new transaction for each file extents it allocates. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 65 ++++++++++++++++++++++++------------------------ 1 file changed, 32 insertions(+), 33 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index eb2db3bde236..8d8baaa61504 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5664,10 +5664,10 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, return err; } -static int prealloc_file_range(struct btrfs_trans_handle *trans, - struct inode *inode, u64 start, u64 end, +static int prealloc_file_range(struct inode *inode, u64 start, u64 end, u64 alloc_hint, int mode) { + struct btrfs_trans_handle *trans; struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_key ins; u64 alloc_size; @@ -5678,17 +5678,23 @@ static int prealloc_file_range(struct btrfs_trans_handle *trans, while (num_bytes > 0) { alloc_size = min(num_bytes, root->fs_info->max_extent); - ret = btrfs_reserve_metadata_space(root, 1); - if (ret) - goto out; - ret = btrfs_reserve_extent(trans, root, alloc_size, root->sectorsize, 0, alloc_hint, (u64)-1, &ins, 1); if (ret) { WARN_ON(1); - goto out; + break; + } + + ret = btrfs_reserve_metadata_space(root, 3); + if (ret) { + btrfs_free_reserved_extent(root, ins.objectid, + ins.offset); + break; } + + trans = btrfs_start_transaction(root, 1); + ret = insert_reserved_file_extent(trans, inode, cur_offset, ins.objectid, ins.offset, ins.offset, @@ -5697,22 +5703,25 @@ static int prealloc_file_range(struct btrfs_trans_handle *trans, BUG_ON(ret); btrfs_drop_extent_cache(inode, cur_offset, cur_offset + ins.offset -1, 0); + num_bytes -= ins.offset; cur_offset += ins.offset; alloc_hint = ins.objectid + ins.offset; - btrfs_unreserve_metadata_space(root, 1); - } -out: - if (cur_offset > start) { + inode->i_ctime = CURRENT_TIME; BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC; if (!(mode & FALLOC_FL_KEEP_SIZE) && - cur_offset > i_size_read(inode)) - btrfs_i_size_write(inode, cur_offset); + cur_offset > inode->i_size) { + i_size_write(inode, cur_offset); + btrfs_ordered_update_i_size(inode, cur_offset, NULL); + } + ret = btrfs_update_inode(trans, root, inode); BUG_ON(ret); - } + btrfs_end_transaction(trans, root); + btrfs_unreserve_metadata_space(root, 3); + } return ret; } @@ -5727,8 +5736,6 @@ static long btrfs_fallocate(struct inode *inode, int mode, u64 locked_end; u64 mask = BTRFS_I(inode)->root->sectorsize - 1; struct extent_map *em; - struct btrfs_trans_handle *trans; - struct btrfs_root *root; int ret; alloc_start = offset & ~mask; @@ -5747,9 +5754,7 @@ static long btrfs_fallocate(struct inode *inode, int mode, goto out; } - root = BTRFS_I(inode)->root; - - ret = btrfs_check_data_free_space(root, inode, + ret = btrfs_check_data_free_space(BTRFS_I(inode)->root, inode, alloc_end - alloc_start); if (ret) goto out; @@ -5758,12 +5763,6 @@ static long btrfs_fallocate(struct inode *inode, int mode, while (1) { struct btrfs_ordered_extent *ordered; - trans = btrfs_start_transaction(BTRFS_I(inode)->root, 1); - if (!trans) { - ret = -EIO; - goto out_free; - } - /* the extent lock is ordered inside the running * transaction */ @@ -5777,8 +5776,6 @@ static long btrfs_fallocate(struct inode *inode, int mode, btrfs_put_ordered_extent(ordered); unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end, GFP_NOFS); - btrfs_end_transaction(trans, BTRFS_I(inode)->root); - /* * we can't wait on the range with the transaction * running or with the extent lock held @@ -5799,9 +5796,12 @@ static long btrfs_fallocate(struct inode *inode, int mode, BUG_ON(IS_ERR(em) || !em); last_byte = min(extent_map_end(em), alloc_end); last_byte = (last_byte + mask) & ~mask; - if (em->block_start == EXTENT_MAP_HOLE) { - ret = prealloc_file_range(trans, inode, cur_offset, - last_byte, alloc_hint, mode); + if (em->block_start == EXTENT_MAP_HOLE || + (cur_offset >= inode->i_size && + !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) { + ret = prealloc_file_range(inode, + cur_offset, last_byte, + alloc_hint, mode); if (ret < 0) { free_extent_map(em); break; @@ -5820,9 +5820,8 @@ static long btrfs_fallocate(struct inode *inode, int mode, unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end, GFP_NOFS); - btrfs_end_transaction(trans, BTRFS_I(inode)->root); -out_free: - btrfs_free_reserved_data_space(root, inode, alloc_end - alloc_start); + btrfs_free_reserved_data_space(BTRFS_I(inode)->root, inode, + alloc_end - alloc_start); out: mutex_unlock(&inode->i_mutex); return ret; -- GitLab From 8082510e7124cc50d728f1b875639cb4e22312cc Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 12 Nov 2009 09:35:36 +0000 Subject: [PATCH 358/618] Btrfs: Make truncate(2) more ENOSPC friendly truncating and deleting regular files are unbound operations, so it's not good to do them in a single transaction. This patch makes btrfs_truncate and btrfs_delete_inode start a new transaction after all items in a tree leaf are deleted. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 316 +++++++++++++++++++++++++----------------- fs/btrfs/relocation.c | 33 +++-- 2 files changed, 212 insertions(+), 137 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 8d8baaa61504..dcec42ee8cf2 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2848,37 +2848,40 @@ static noinline int drop_csum_leaves(struct btrfs_trans_handle *trans, * min_type is the minimum key type to truncate down to. If set to 0, this * will kill all the items on this inode, including the INODE_ITEM_KEY. */ -noinline int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, - struct btrfs_root *root, - struct inode *inode, - u64 new_size, u32 min_type) +int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct inode *inode, + u64 new_size, u32 min_type) { - int ret; struct btrfs_path *path; - struct btrfs_key key; - struct btrfs_key found_key; - u32 found_type = (u8)-1; struct extent_buffer *leaf; struct btrfs_file_extent_item *fi; + struct btrfs_key key; + struct btrfs_key found_key; u64 extent_start = 0; u64 extent_num_bytes = 0; u64 extent_offset = 0; u64 item_end = 0; + u64 mask = root->sectorsize - 1; + u32 found_type = (u8)-1; int found_extent; int del_item; int pending_del_nr = 0; int pending_del_slot = 0; int extent_type = -1; int encoding; - u64 mask = root->sectorsize - 1; + int ret; + int err = 0; + + BUG_ON(new_size > 0 && min_type != BTRFS_EXTENT_DATA_KEY); if (root->ref_cows) btrfs_drop_extent_cache(inode, new_size & (~mask), (u64)-1, 0); + path = btrfs_alloc_path(); BUG_ON(!path); path->reada = -1; - /* FIXME, add redo link to tree so we don't leak on crash */ key.objectid = inode->i_ino; key.offset = (u64)-1; key.type = (u8)-1; @@ -2886,17 +2889,17 @@ noinline int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, search_again: path->leave_spinning = 1; ret = btrfs_search_slot(trans, root, &key, path, -1, 1); - if (ret < 0) - goto error; + if (ret < 0) { + err = ret; + goto out; + } if (ret > 0) { /* there are no items in the tree for us to truncate, we're * done */ - if (path->slots[0] == 0) { - ret = 0; - goto error; - } + if (path->slots[0] == 0) + goto out; path->slots[0]--; } @@ -2931,28 +2934,17 @@ noinline int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, } item_end--; } - if (item_end < new_size) { - if (found_type == BTRFS_DIR_ITEM_KEY) - found_type = BTRFS_INODE_ITEM_KEY; - else if (found_type == BTRFS_EXTENT_ITEM_KEY) - found_type = BTRFS_EXTENT_DATA_KEY; - else if (found_type == BTRFS_EXTENT_DATA_KEY) - found_type = BTRFS_XATTR_ITEM_KEY; - else if (found_type == BTRFS_XATTR_ITEM_KEY) - found_type = BTRFS_INODE_REF_KEY; - else if (found_type) - found_type--; - else + if (found_type > min_type) { + del_item = 1; + } else { + if (item_end < new_size) break; - btrfs_set_key_type(&key, found_type); - goto next; + if (found_key.offset >= new_size) + del_item = 1; + else + del_item = 0; } - if (found_key.offset >= new_size) - del_item = 1; - else - del_item = 0; found_extent = 0; - /* FIXME, shrink the extent if the ref count is only 1 */ if (found_type != BTRFS_EXTENT_DATA_KEY) goto delete; @@ -3039,42 +3031,36 @@ noinline int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, inode->i_ino, extent_offset); BUG_ON(ret); } -next: - if (path->slots[0] == 0) { - if (pending_del_nr) - goto del_pending; - btrfs_release_path(root, path); - if (found_type == BTRFS_INODE_ITEM_KEY) - break; - goto search_again; - } - path->slots[0]--; - if (pending_del_nr && - path->slots[0] + 1 != pending_del_slot) { - struct btrfs_key debug; -del_pending: - btrfs_item_key_to_cpu(path->nodes[0], &debug, - pending_del_slot); - ret = btrfs_del_items(trans, root, path, - pending_del_slot, - pending_del_nr); - BUG_ON(ret); - pending_del_nr = 0; + if (found_type == BTRFS_INODE_ITEM_KEY) + break; + + if (path->slots[0] == 0 || + path->slots[0] != pending_del_slot) { + if (root->ref_cows) { + err = -EAGAIN; + goto out; + } + if (pending_del_nr) { + ret = btrfs_del_items(trans, root, path, + pending_del_slot, + pending_del_nr); + BUG_ON(ret); + pending_del_nr = 0; + } btrfs_release_path(root, path); - if (found_type == BTRFS_INODE_ITEM_KEY) - break; goto search_again; + } else { + path->slots[0]--; } } - ret = 0; -error: +out: if (pending_del_nr) { ret = btrfs_del_items(trans, root, path, pending_del_slot, pending_del_nr); } btrfs_free_path(path); - return ret; + return err; } /* @@ -3194,10 +3180,6 @@ int btrfs_cont_expand(struct inode *inode, loff_t size) if (size <= hole_start) return 0; - err = btrfs_truncate_page(inode->i_mapping, inode->i_size); - if (err) - return err; - while (1) { struct btrfs_ordered_extent *ordered; btrfs_wait_ordered_range(inode, hole_start, @@ -3210,9 +3192,6 @@ int btrfs_cont_expand(struct inode *inode, loff_t size) btrfs_put_ordered_extent(ordered); } - trans = btrfs_start_transaction(root, 1); - btrfs_set_trans_block_group(trans, inode); - cur_offset = hole_start; while (1) { em = btrfs_get_extent(inode, NULL, 0, cur_offset, @@ -3220,38 +3199,120 @@ int btrfs_cont_expand(struct inode *inode, loff_t size) BUG_ON(IS_ERR(em) || !em); last_byte = min(extent_map_end(em), block_end); last_byte = (last_byte + mask) & ~mask; - if (test_bit(EXTENT_FLAG_VACANCY, &em->flags)) { + if (!test_bit(EXTENT_FLAG_PREALLOC, &em->flags)) { u64 hint_byte = 0; hole_size = last_byte - cur_offset; - err = btrfs_drop_extents(trans, inode, cur_offset, - cur_offset + hole_size, - &hint_byte, 1); - if (err) - break; - err = btrfs_reserve_metadata_space(root, 1); + err = btrfs_reserve_metadata_space(root, 2); if (err) break; + trans = btrfs_start_transaction(root, 1); + btrfs_set_trans_block_group(trans, inode); + + err = btrfs_drop_extents(trans, inode, cur_offset, + cur_offset + hole_size, + &hint_byte, 1); + BUG_ON(err); + err = btrfs_insert_file_extent(trans, root, inode->i_ino, cur_offset, 0, 0, hole_size, 0, hole_size, 0, 0, 0); + BUG_ON(err); + btrfs_drop_extent_cache(inode, hole_start, last_byte - 1, 0); - btrfs_unreserve_metadata_space(root, 1); + + btrfs_end_transaction(trans, root); + btrfs_unreserve_metadata_space(root, 2); } free_extent_map(em); cur_offset = last_byte; - if (err || cur_offset >= block_end) + if (cur_offset >= block_end) break; } - btrfs_end_transaction(trans, root); unlock_extent(io_tree, hole_start, block_end - 1, GFP_NOFS); return err; } +static int btrfs_setattr_size(struct inode *inode, struct iattr *attr) +{ + struct btrfs_root *root = BTRFS_I(inode)->root; + struct btrfs_trans_handle *trans; + unsigned long nr; + int ret; + + if (attr->ia_size == inode->i_size) + return 0; + + if (attr->ia_size > inode->i_size) { + unsigned long limit; + limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur; + if (attr->ia_size > inode->i_sb->s_maxbytes) + return -EFBIG; + if (limit != RLIM_INFINITY && attr->ia_size > limit) { + send_sig(SIGXFSZ, current, 0); + return -EFBIG; + } + } + + ret = btrfs_reserve_metadata_space(root, 1); + if (ret) + return ret; + + trans = btrfs_start_transaction(root, 1); + btrfs_set_trans_block_group(trans, inode); + + ret = btrfs_orphan_add(trans, inode); + BUG_ON(ret); + + nr = trans->blocks_used; + btrfs_end_transaction(trans, root); + btrfs_unreserve_metadata_space(root, 1); + btrfs_btree_balance_dirty(root, nr); + + if (attr->ia_size > inode->i_size) { + ret = btrfs_cont_expand(inode, attr->ia_size); + if (ret) { + btrfs_truncate(inode); + return ret; + } + + i_size_write(inode, attr->ia_size); + btrfs_ordered_update_i_size(inode, inode->i_size, NULL); + + trans = btrfs_start_transaction(root, 1); + btrfs_set_trans_block_group(trans, inode); + + ret = btrfs_update_inode(trans, root, inode); + BUG_ON(ret); + if (inode->i_nlink > 0) { + ret = btrfs_orphan_del(trans, inode); + BUG_ON(ret); + } + nr = trans->blocks_used; + btrfs_end_transaction(trans, root); + btrfs_btree_balance_dirty(root, nr); + return 0; + } + + /* + * We're truncating a file that used to have good data down to + * zero. Make sure it gets into the ordered flush list so that + * any new writes get down to disk quickly. + */ + if (attr->ia_size == 0) + BTRFS_I(inode)->ordered_data_close = 1; + + /* we don't support swapfiles, so vmtruncate shouldn't fail */ + ret = vmtruncate(inode, attr->ia_size); + BUG_ON(ret); + + return 0; +} + static int btrfs_setattr(struct dentry *dentry, struct iattr *attr) { struct inode *inode = dentry->d_inode; @@ -3262,23 +3323,14 @@ static int btrfs_setattr(struct dentry *dentry, struct iattr *attr) return err; if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)) { - if (attr->ia_size > inode->i_size) { - err = btrfs_cont_expand(inode, attr->ia_size); - if (err) - return err; - } else if (inode->i_size > 0 && - attr->ia_size == 0) { - - /* we're truncating a file that used to have good - * data down to zero. Make sure it gets into - * the ordered flush list so that any new writes - * get down to disk quickly. - */ - BTRFS_I(inode)->ordered_data_close = 1; - } + err = btrfs_setattr_size(inode, attr); + if (err) + return err; } + attr->ia_valid &= ~ATTR_SIZE; - err = inode_setattr(inode, attr); + if (attr->ia_valid) + err = inode_setattr(inode, attr); if (!err && ((attr->ia_valid & ATTR_MODE))) err = btrfs_acl_chmod(inode); @@ -3310,30 +3362,32 @@ void btrfs_delete_inode(struct inode *inode) } btrfs_i_size_write(inode, 0); - trans = btrfs_join_transaction(root, 1); - btrfs_set_trans_block_group(trans, inode); - ret = btrfs_truncate_inode_items(trans, root, inode, inode->i_size, 0); - if (ret) { - btrfs_orphan_del(NULL, inode); - goto no_delete_lock; - } + while (1) { + trans = btrfs_start_transaction(root, 1); + btrfs_set_trans_block_group(trans, inode); + ret = btrfs_truncate_inode_items(trans, root, inode, 0, 0); - btrfs_orphan_del(trans, inode); + if (ret != -EAGAIN) + break; - nr = trans->blocks_used; - clear_inode(inode); + nr = trans->blocks_used; + btrfs_end_transaction(trans, root); + trans = NULL; + btrfs_btree_balance_dirty(root, nr); + } - btrfs_end_transaction(trans, root); - btrfs_btree_balance_dirty(root, nr); - return; + if (ret == 0) { + ret = btrfs_orphan_del(trans, inode); + BUG_ON(ret); + } -no_delete_lock: nr = trans->blocks_used; btrfs_end_transaction(trans, root); btrfs_btree_balance_dirty(root, nr); no_delete: clear_inode(inode); + return; } /* @@ -5097,17 +5151,20 @@ static void btrfs_truncate(struct inode *inode) unsigned long nr; u64 mask = root->sectorsize - 1; - if (!S_ISREG(inode->i_mode)) - return; - if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) + if (!S_ISREG(inode->i_mode)) { + WARN_ON(1); return; + } ret = btrfs_truncate_page(inode->i_mapping, inode->i_size); if (ret) return; + btrfs_wait_ordered_range(inode, inode->i_size & (~mask), (u64)-1); + btrfs_ordered_update_i_size(inode, inode->i_size, NULL); trans = btrfs_start_transaction(root, 1); + btrfs_set_trans_block_group(trans, inode); /* * setattr is responsible for setting the ordered_data_close flag, @@ -5129,21 +5186,32 @@ static void btrfs_truncate(struct inode *inode) if (inode->i_size == 0 && BTRFS_I(inode)->ordered_data_close) btrfs_add_ordered_operation(trans, root, inode); - btrfs_set_trans_block_group(trans, inode); - btrfs_i_size_write(inode, inode->i_size); + while (1) { + ret = btrfs_truncate_inode_items(trans, root, inode, + inode->i_size, + BTRFS_EXTENT_DATA_KEY); + if (ret != -EAGAIN) + break; - ret = btrfs_orphan_add(trans, inode); - if (ret) - goto out; - /* FIXME, add redo link to tree so we don't leak on crash */ - ret = btrfs_truncate_inode_items(trans, root, inode, inode->i_size, - BTRFS_EXTENT_DATA_KEY); - btrfs_update_inode(trans, root, inode); + ret = btrfs_update_inode(trans, root, inode); + BUG_ON(ret); + + nr = trans->blocks_used; + btrfs_end_transaction(trans, root); + btrfs_btree_balance_dirty(root, nr); + + trans = btrfs_start_transaction(root, 1); + btrfs_set_trans_block_group(trans, inode); + } - ret = btrfs_orphan_del(trans, inode); + if (ret == 0 && inode->i_nlink > 0) { + ret = btrfs_orphan_del(trans, inode); + BUG_ON(ret); + } + + ret = btrfs_update_inode(trans, root, inode); BUG_ON(ret); -out: nr = trans->blocks_used; ret = btrfs_end_transaction_throttle(trans, root); BUG_ON(ret); @@ -5240,9 +5308,9 @@ void btrfs_destroy_inode(struct inode *inode) spin_lock(&root->list_lock); if (!list_empty(&BTRFS_I(inode)->i_orphan)) { - printk(KERN_ERR "BTRFS: inode %lu: inode still on the orphan" - " list\n", inode->i_ino); - dump_stack(); + printk(KERN_INFO "BTRFS: inode %lu still on the orphan list\n", + inode->i_ino); + list_del_init(&BTRFS_I(inode)->i_orphan); } spin_unlock(&root->list_lock); diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 975fdd33ac41..f2aa53d2f944 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -1561,6 +1561,20 @@ static int invalidate_extent_cache(struct btrfs_root *root, return 0; } +static void put_inodes(struct list_head *list) +{ + struct inodevec *ivec; + while (!list_empty(list)) { + ivec = list_entry(list->next, struct inodevec, list); + list_del(&ivec->list); + while (ivec->nr > 0) { + ivec->nr--; + iput(ivec->inode[ivec->nr]); + } + kfree(ivec); + } +} + static int find_next_key(struct btrfs_path *path, int level, struct btrfs_key *key) @@ -1723,6 +1737,11 @@ static noinline_for_stack int merge_reloc_root(struct reloc_control *rc, btrfs_btree_balance_dirty(root, nr); + /* + * put inodes outside transaction, otherwise we may deadlock. + */ + put_inodes(&inode_list); + if (replaced && rc->stage == UPDATE_DATA_PTRS) invalidate_extent_cache(root, &key, &next_key); } @@ -1752,19 +1771,7 @@ static noinline_for_stack int merge_reloc_root(struct reloc_control *rc, btrfs_btree_balance_dirty(root, nr); - /* - * put inodes while we aren't holding the tree locks - */ - while (!list_empty(&inode_list)) { - struct inodevec *ivec; - ivec = list_entry(inode_list.next, struct inodevec, list); - list_del(&ivec->list); - while (ivec->nr > 0) { - ivec->nr--; - iput(ivec->inode[ivec->nr]); - } - kfree(ivec); - } + put_inodes(&inode_list); if (replaced && rc->stage == UPDATE_DATA_PTRS) invalidate_extent_cache(root, &key, &next_key); -- GitLab From f34f57a3ab4e73304d78c125682f1a53cd3975f2 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 12 Nov 2009 09:35:27 +0000 Subject: [PATCH 359/618] Btrfs: Pass transaction handle to security and ACL initialization functions Pass transaction handle down to security and ACL initialization functions, so we can avoid starting nested transactions Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/acl.c | 23 +++++++------ fs/btrfs/ctree.h | 13 +++++--- fs/btrfs/dir-item.c | 19 ++++------- fs/btrfs/inode.c | 15 +++++---- fs/btrfs/xattr.c | 80 ++++++++++++++++++++++++++++++--------------- fs/btrfs/xattr.h | 9 ++--- 6 files changed, 96 insertions(+), 63 deletions(-) diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c index 361604244271..1898f8555f06 100644 --- a/fs/btrfs/acl.c +++ b/fs/btrfs/acl.c @@ -94,7 +94,8 @@ static int btrfs_xattr_get_acl(struct inode *inode, int type, /* * Needs to be called with fs_mutex held */ -static int btrfs_set_acl(struct inode *inode, struct posix_acl *acl, int type) +static int btrfs_set_acl(struct btrfs_trans_handle *trans, + struct inode *inode, struct posix_acl *acl, int type) { int ret, size = 0; const char *name; @@ -140,8 +141,7 @@ static int btrfs_set_acl(struct inode *inode, struct posix_acl *acl, int type) goto out; } - ret = __btrfs_setxattr(inode, name, value, size, 0); - + ret = __btrfs_setxattr(trans, inode, name, value, size, 0); out: kfree(value); @@ -154,7 +154,7 @@ static int btrfs_set_acl(struct inode *inode, struct posix_acl *acl, int type) static int btrfs_xattr_set_acl(struct inode *inode, int type, const void *value, size_t size) { - int ret = 0; + int ret; struct posix_acl *acl = NULL; if (value) { @@ -167,7 +167,7 @@ static int btrfs_xattr_set_acl(struct inode *inode, int type, } } - ret = btrfs_set_acl(inode, acl, type); + ret = btrfs_set_acl(NULL, inode, acl, type); posix_acl_release(acl); @@ -221,7 +221,8 @@ int btrfs_check_acl(struct inode *inode, int mask) * stuff has been fixed to work with that. If the locking stuff changes, we * need to re-evaluate the acl locking stuff. */ -int btrfs_init_acl(struct inode *inode, struct inode *dir) +int btrfs_init_acl(struct btrfs_trans_handle *trans, + struct inode *inode, struct inode *dir) { struct posix_acl *acl = NULL; int ret = 0; @@ -246,7 +247,8 @@ int btrfs_init_acl(struct inode *inode, struct inode *dir) mode_t mode; if (S_ISDIR(inode->i_mode)) { - ret = btrfs_set_acl(inode, acl, ACL_TYPE_DEFAULT); + ret = btrfs_set_acl(trans, inode, acl, + ACL_TYPE_DEFAULT); if (ret) goto failed; } @@ -261,7 +263,7 @@ int btrfs_init_acl(struct inode *inode, struct inode *dir) inode->i_mode = mode; if (ret > 0) { /* we need an acl */ - ret = btrfs_set_acl(inode, clone, + ret = btrfs_set_acl(trans, inode, clone, ACL_TYPE_ACCESS); } } @@ -294,7 +296,7 @@ int btrfs_acl_chmod(struct inode *inode) ret = posix_acl_chmod_masq(clone, inode->i_mode); if (!ret) - ret = btrfs_set_acl(inode, clone, ACL_TYPE_ACCESS); + ret = btrfs_set_acl(NULL, inode, clone, ACL_TYPE_ACCESS); posix_acl_release(clone); @@ -320,7 +322,8 @@ int btrfs_acl_chmod(struct inode *inode) return 0; } -int btrfs_init_acl(struct inode *inode, struct inode *dir) +int btrfs_init_acl(struct btrfs_trans_handle *trans, + struct inode *inode, struct inode *dir) { return 0; } diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index fcfbefbbb685..a7cac2148c7c 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -310,6 +310,9 @@ struct btrfs_header { #define BTRFS_MAX_INLINE_DATA_SIZE(r) (BTRFS_LEAF_DATA_SIZE(r) - \ sizeof(struct btrfs_item) - \ sizeof(struct btrfs_file_extent_item)) +#define BTRFS_MAX_XATTR_SIZE(r) (BTRFS_LEAF_DATA_SIZE(r) - \ + sizeof(struct btrfs_item) -\ + sizeof(struct btrfs_dir_item)) /* @@ -2201,9 +2204,10 @@ int btrfs_delete_one_dir_name(struct btrfs_trans_handle *trans, struct btrfs_path *path, struct btrfs_dir_item *di); int btrfs_insert_xattr_item(struct btrfs_trans_handle *trans, - struct btrfs_root *root, const char *name, - u16 name_len, const void *data, u16 data_len, - u64 dir); + struct btrfs_root *root, + struct btrfs_path *path, u64 objectid, + const char *name, u16 name_len, + const void *data, u16 data_len); struct btrfs_dir_item *btrfs_lookup_xattr(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_path *path, u64 dir, @@ -2382,7 +2386,8 @@ int btrfs_check_acl(struct inode *inode, int mask); #else #define btrfs_check_acl NULL #endif -int btrfs_init_acl(struct inode *inode, struct inode *dir); +int btrfs_init_acl(struct btrfs_trans_handle *trans, + struct inode *inode, struct inode *dir); int btrfs_acl_chmod(struct inode *inode); /* relocation.c */ diff --git a/fs/btrfs/dir-item.c b/fs/btrfs/dir-item.c index f3a6075519cc..e9103b3baa49 100644 --- a/fs/btrfs/dir-item.c +++ b/fs/btrfs/dir-item.c @@ -68,12 +68,12 @@ static struct btrfs_dir_item *insert_with_overflow(struct btrfs_trans_handle * into the tree */ int btrfs_insert_xattr_item(struct btrfs_trans_handle *trans, - struct btrfs_root *root, const char *name, - u16 name_len, const void *data, u16 data_len, - u64 dir) + struct btrfs_root *root, + struct btrfs_path *path, u64 objectid, + const char *name, u16 name_len, + const void *data, u16 data_len) { int ret = 0; - struct btrfs_path *path; struct btrfs_dir_item *dir_item; unsigned long name_ptr, data_ptr; struct btrfs_key key, location; @@ -81,15 +81,11 @@ int btrfs_insert_xattr_item(struct btrfs_trans_handle *trans, struct extent_buffer *leaf; u32 data_size; - key.objectid = dir; + BUG_ON(name_len + data_len > BTRFS_MAX_XATTR_SIZE(root)); + + key.objectid = objectid; btrfs_set_key_type(&key, BTRFS_XATTR_ITEM_KEY); key.offset = btrfs_name_hash(name, name_len); - path = btrfs_alloc_path(); - if (!path) - return -ENOMEM; - if (name_len + data_len + sizeof(struct btrfs_dir_item) > - BTRFS_LEAF_DATA_SIZE(root) - sizeof(struct btrfs_item)) - return -ENOSPC; data_size = sizeof(*dir_item) + name_len + data_len; dir_item = insert_with_overflow(trans, root, path, &key, data_size, @@ -117,7 +113,6 @@ int btrfs_insert_xattr_item(struct btrfs_trans_handle *trans, write_extent_buffer(leaf, data, data_ptr, data_len); btrfs_mark_buffer_dirty(path->nodes[0]); - btrfs_free_path(path); return ret; } diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index dcec42ee8cf2..82740a3c628a 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -88,13 +88,14 @@ static noinline int cow_file_range(struct inode *inode, u64 start, u64 end, int *page_started, unsigned long *nr_written, int unlock); -static int btrfs_init_inode_security(struct inode *inode, struct inode *dir) +static int btrfs_init_inode_security(struct btrfs_trans_handle *trans, + struct inode *inode, struct inode *dir) { int err; - err = btrfs_init_acl(inode, dir); + err = btrfs_init_acl(trans, inode, dir); if (!err) - err = btrfs_xattr_security_init(inode, dir); + err = btrfs_xattr_security_init(trans, inode, dir); return err; } @@ -4296,7 +4297,7 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, if (IS_ERR(inode)) goto out_unlock; - err = btrfs_init_inode_security(inode, dir); + err = btrfs_init_inode_security(trans, inode, dir); if (err) { drop_inode = 1; goto out_unlock; @@ -4367,7 +4368,7 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, if (IS_ERR(inode)) goto out_unlock; - err = btrfs_init_inode_security(inode, dir); + err = btrfs_init_inode_security(trans, inode, dir); if (err) { drop_inode = 1; goto out_unlock; @@ -4500,7 +4501,7 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) drop_on_err = 1; - err = btrfs_init_inode_security(inode, dir); + err = btrfs_init_inode_security(trans, inode, dir); if (err) goto out_fail; @@ -5660,7 +5661,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, if (IS_ERR(inode)) goto out_unlock; - err = btrfs_init_inode_security(inode, dir); + err = btrfs_init_inode_security(trans, inode, dir); if (err) { drop_inode = 1; goto out_unlock; diff --git a/fs/btrfs/xattr.c b/fs/btrfs/xattr.c index b6dd5967c48a..193b58f7d3f3 100644 --- a/fs/btrfs/xattr.c +++ b/fs/btrfs/xattr.c @@ -85,22 +85,23 @@ ssize_t __btrfs_getxattr(struct inode *inode, const char *name, return ret; } -int __btrfs_setxattr(struct inode *inode, const char *name, - const void *value, size_t size, int flags) +static int do_setxattr(struct btrfs_trans_handle *trans, + struct inode *inode, const char *name, + const void *value, size_t size, int flags) { struct btrfs_dir_item *di; struct btrfs_root *root = BTRFS_I(inode)->root; - struct btrfs_trans_handle *trans; struct btrfs_path *path; - int ret = 0, mod = 0; + size_t name_len = strlen(name); + int ret = 0; + + if (name_len + size > BTRFS_MAX_XATTR_SIZE(root)) + return -ENOSPC; path = btrfs_alloc_path(); if (!path) return -ENOMEM; - trans = btrfs_join_transaction(root, 1); - btrfs_set_trans_block_group(trans, inode); - /* first lets see if we already have this xattr */ di = btrfs_lookup_xattr(trans, root, path, inode->i_ino, name, strlen(name), -1); @@ -118,15 +119,12 @@ int __btrfs_setxattr(struct inode *inode, const char *name, } ret = btrfs_delete_one_dir_name(trans, root, path, di); - if (ret) - goto out; + BUG_ON(ret); btrfs_release_path(root, path); /* if we don't have a value then we are removing the xattr */ - if (!value) { - mod = 1; + if (!value) goto out; - } } else { btrfs_release_path(root, path); @@ -138,20 +136,45 @@ int __btrfs_setxattr(struct inode *inode, const char *name, } /* ok we have to create a completely new xattr */ - ret = btrfs_insert_xattr_item(trans, root, name, strlen(name), - value, size, inode->i_ino); + ret = btrfs_insert_xattr_item(trans, root, path, inode->i_ino, + name, name_len, value, size); + BUG_ON(ret); +out: + btrfs_free_path(path); + return ret; +} + +int __btrfs_setxattr(struct btrfs_trans_handle *trans, + struct inode *inode, const char *name, + const void *value, size_t size, int flags) +{ + struct btrfs_root *root = BTRFS_I(inode)->root; + int ret; + + if (trans) + return do_setxattr(trans, inode, name, value, size, flags); + + ret = btrfs_reserve_metadata_space(root, 2); if (ret) - goto out; - mod = 1; + return ret; -out: - if (mod) { - inode->i_ctime = CURRENT_TIME; - ret = btrfs_update_inode(trans, root, inode); + trans = btrfs_start_transaction(root, 1); + if (!trans) { + ret = -ENOMEM; + goto out; } + btrfs_set_trans_block_group(trans, inode); - btrfs_end_transaction(trans, root); - btrfs_free_path(path); + ret = do_setxattr(trans, inode, name, value, size, flags); + if (ret) + goto out; + + inode->i_ctime = CURRENT_TIME; + ret = btrfs_update_inode(trans, root, inode); + BUG_ON(ret); +out: + btrfs_end_transaction_throttle(trans, root); + btrfs_unreserve_metadata_space(root, 2); return ret; } @@ -314,7 +337,9 @@ int btrfs_setxattr(struct dentry *dentry, const char *name, const void *value, if (size == 0) value = ""; /* empty EA, do not remove */ - return __btrfs_setxattr(dentry->d_inode, name, value, size, flags); + + return __btrfs_setxattr(NULL, dentry->d_inode, name, value, size, + flags); } int btrfs_removexattr(struct dentry *dentry, const char *name) @@ -329,10 +354,13 @@ int btrfs_removexattr(struct dentry *dentry, const char *name) if (!btrfs_is_valid_xattr(name)) return -EOPNOTSUPP; - return __btrfs_setxattr(dentry->d_inode, name, NULL, 0, XATTR_REPLACE); + + return __btrfs_setxattr(NULL, dentry->d_inode, name, NULL, 0, + XATTR_REPLACE); } -int btrfs_xattr_security_init(struct inode *inode, struct inode *dir) +int btrfs_xattr_security_init(struct btrfs_trans_handle *trans, + struct inode *inode, struct inode *dir) { int err; size_t len; @@ -354,7 +382,7 @@ int btrfs_xattr_security_init(struct inode *inode, struct inode *dir) } else { strcpy(name, XATTR_SECURITY_PREFIX); strcpy(name + XATTR_SECURITY_PREFIX_LEN, suffix); - err = __btrfs_setxattr(inode, name, value, len, 0); + err = __btrfs_setxattr(trans, inode, name, value, len, 0); kfree(name); } diff --git a/fs/btrfs/xattr.h b/fs/btrfs/xattr.h index c71e9c3cf3f7..721efa0346e0 100644 --- a/fs/btrfs/xattr.h +++ b/fs/btrfs/xattr.h @@ -27,15 +27,16 @@ extern struct xattr_handler *btrfs_xattr_handlers[]; extern ssize_t __btrfs_getxattr(struct inode *inode, const char *name, void *buffer, size_t size); -extern int __btrfs_setxattr(struct inode *inode, const char *name, - const void *value, size_t size, int flags); - +extern int __btrfs_setxattr(struct btrfs_trans_handle *trans, + struct inode *inode, const char *name, + const void *value, size_t size, int flags); extern ssize_t btrfs_getxattr(struct dentry *dentry, const char *name, void *buffer, size_t size); extern int btrfs_setxattr(struct dentry *dentry, const char *name, const void *value, size_t size, int flags); extern int btrfs_removexattr(struct dentry *dentry, const char *name); -extern int btrfs_xattr_security_init(struct inode *inode, struct inode *dir); +extern int btrfs_xattr_security_init(struct btrfs_trans_handle *trans, + struct inode *inode, struct inode *dir); #endif /* __XATTR__ */ -- GitLab From 24bbcf0442ee04660a5a030efdbb6d03f1c275cb Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 12 Nov 2009 09:36:34 +0000 Subject: [PATCH 360/618] Btrfs: Add delayed iput iput() can trigger new transactions if we are dropping the final reference, so calling it in btrfs_commit_transaction may end up deadlock. This patch adds delayed iput to avoid the issue. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 7 +++++- fs/btrfs/disk-io.c | 4 +++ fs/btrfs/extent-tree.c | 8 +++--- fs/btrfs/inode.c | 55 +++++++++++++++++++++++++++++++++++++++-- fs/btrfs/ordered-data.c | 10 +++++--- fs/btrfs/ordered-data.h | 3 ++- fs/btrfs/relocation.c | 4 +-- fs/btrfs/super.c | 4 +-- fs/btrfs/transaction.c | 13 +++++++--- 9 files changed, 90 insertions(+), 18 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index a7cac2148c7c..1983c889bb1c 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -872,6 +872,9 @@ struct btrfs_fs_info { struct list_head dead_roots; struct list_head caching_block_groups; + spinlock_t delayed_iput_lock; + struct list_head delayed_iputs; + atomic_t nr_async_submits; atomic_t async_submit_draining; atomic_t nr_async_bios; @@ -2301,7 +2304,7 @@ int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, struct inode *inode, u64 new_size, u32 min_type); -int btrfs_start_delalloc_inodes(struct btrfs_root *root); +int btrfs_start_delalloc_inodes(struct btrfs_root *root, int delay_iput); int btrfs_set_extent_delalloc(struct inode *inode, u64 start, u64 end); int btrfs_writepages(struct address_space *mapping, struct writeback_control *wbc); @@ -2341,6 +2344,8 @@ int btrfs_orphan_del(struct btrfs_trans_handle *trans, struct inode *inode); void btrfs_orphan_cleanup(struct btrfs_root *root); int btrfs_cont_expand(struct inode *inode, loff_t size); int btrfs_invalidate_inodes(struct btrfs_root *root); +void btrfs_add_delayed_iput(struct inode *inode); +void btrfs_run_delayed_iputs(struct btrfs_root *root); extern const struct dentry_operations btrfs_dentry_operations; /* ioctl.c */ diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index c1e59e33f020..009e3bd18f23 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1476,6 +1476,7 @@ static int cleaner_kthread(void *arg) if (!(root->fs_info->sb->s_flags & MS_RDONLY) && mutex_trylock(&root->fs_info->cleaner_mutex)) { + btrfs_run_delayed_iputs(root); btrfs_clean_old_snapshots(root); mutex_unlock(&root->fs_info->cleaner_mutex); } @@ -1605,6 +1606,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, INIT_RADIX_TREE(&fs_info->fs_roots_radix, GFP_ATOMIC); INIT_LIST_HEAD(&fs_info->trans_list); INIT_LIST_HEAD(&fs_info->dead_roots); + INIT_LIST_HEAD(&fs_info->delayed_iputs); INIT_LIST_HEAD(&fs_info->hashers); INIT_LIST_HEAD(&fs_info->delalloc_inodes); INIT_LIST_HEAD(&fs_info->ordered_operations); @@ -1613,6 +1615,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, spin_lock_init(&fs_info->new_trans_lock); spin_lock_init(&fs_info->ref_cache_lock); spin_lock_init(&fs_info->fs_roots_radix_lock); + spin_lock_init(&fs_info->delayed_iput_lock); init_completion(&fs_info->kobj_unregister); fs_info->tree_root = tree_root; @@ -2386,6 +2389,7 @@ int btrfs_commit_super(struct btrfs_root *root) int ret; mutex_lock(&root->fs_info->cleaner_mutex); + btrfs_run_delayed_iputs(root); btrfs_clean_old_snapshots(root); mutex_unlock(&root->fs_info->cleaner_mutex); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 4a86508ce473..fcdccfa46004 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2880,9 +2880,9 @@ static noinline void flush_delalloc_async(struct btrfs_work *work) root = async->root; info = async->info; - btrfs_start_delalloc_inodes(root); + btrfs_start_delalloc_inodes(root, 0); wake_up(&info->flush_wait); - btrfs_wait_ordered_extents(root, 0); + btrfs_wait_ordered_extents(root, 0, 0); spin_lock(&info->lock); info->flushing = 0; @@ -2956,8 +2956,8 @@ static void flush_delalloc(struct btrfs_root *root, return; flush: - btrfs_start_delalloc_inodes(root); - btrfs_wait_ordered_extents(root, 0); + btrfs_start_delalloc_inodes(root, 0); + btrfs_wait_ordered_extents(root, 0, 0); spin_lock(&info->lock); info->flushing = 0; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 82740a3c628a..168e8c040aab 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2022,6 +2022,54 @@ static int btrfs_readpage_end_io_hook(struct page *page, u64 start, u64 end, return -EIO; } +struct delayed_iput { + struct list_head list; + struct inode *inode; +}; + +void btrfs_add_delayed_iput(struct inode *inode) +{ + struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info; + struct delayed_iput *delayed; + + if (atomic_add_unless(&inode->i_count, -1, 1)) + return; + + delayed = kmalloc(sizeof(*delayed), GFP_NOFS | __GFP_NOFAIL); + delayed->inode = inode; + + spin_lock(&fs_info->delayed_iput_lock); + list_add_tail(&delayed->list, &fs_info->delayed_iputs); + spin_unlock(&fs_info->delayed_iput_lock); +} + +void btrfs_run_delayed_iputs(struct btrfs_root *root) +{ + LIST_HEAD(list); + struct btrfs_fs_info *fs_info = root->fs_info; + struct delayed_iput *delayed; + int empty; + + spin_lock(&fs_info->delayed_iput_lock); + empty = list_empty(&fs_info->delayed_iputs); + spin_unlock(&fs_info->delayed_iput_lock); + if (empty) + return; + + down_read(&root->fs_info->cleanup_work_sem); + spin_lock(&fs_info->delayed_iput_lock); + list_splice_init(&fs_info->delayed_iputs, &list); + spin_unlock(&fs_info->delayed_iput_lock); + + while (!list_empty(&list)) { + delayed = list_entry(list.next, struct delayed_iput, list); + list_del(&delayed->list); + iput(delayed->inode); + kfree(delayed); + } + up_read(&root->fs_info->cleanup_work_sem); +} + /* * This creates an orphan entry for the given inode in case something goes * wrong in the middle of an unlink/truncate. @@ -5568,7 +5616,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, * some fairly slow code that needs optimization. This walks the list * of all the inodes with pending delalloc and forces them to disk. */ -int btrfs_start_delalloc_inodes(struct btrfs_root *root) +int btrfs_start_delalloc_inodes(struct btrfs_root *root, int delay_iput) { struct list_head *head = &root->fs_info->delalloc_inodes; struct btrfs_inode *binode; @@ -5587,7 +5635,10 @@ int btrfs_start_delalloc_inodes(struct btrfs_root *root) spin_unlock(&root->fs_info->delalloc_lock); if (inode) { filemap_flush(inode->i_mapping); - iput(inode); + if (delay_iput) + btrfs_add_delayed_iput(inode); + else + iput(inode); } cond_resched(); spin_lock(&root->fs_info->delalloc_lock); diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index 9b16073bb875..b10a49d4bc6a 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -352,7 +352,8 @@ int btrfs_remove_ordered_extent(struct inode *inode, * wait for all the ordered extents in a root. This is done when balancing * space between drives. */ -int btrfs_wait_ordered_extents(struct btrfs_root *root, int nocow_only) +int btrfs_wait_ordered_extents(struct btrfs_root *root, + int nocow_only, int delay_iput) { struct list_head splice; struct list_head *cur; @@ -389,7 +390,10 @@ int btrfs_wait_ordered_extents(struct btrfs_root *root, int nocow_only) if (inode) { btrfs_start_ordered_extent(inode, ordered, 1); btrfs_put_ordered_extent(ordered); - iput(inode); + if (delay_iput) + btrfs_add_delayed_iput(inode); + else + iput(inode); } else { btrfs_put_ordered_extent(ordered); } @@ -447,7 +451,7 @@ int btrfs_run_ordered_operations(struct btrfs_root *root, int wait) btrfs_wait_ordered_range(inode, 0, (u64)-1); else filemap_flush(inode->i_mapping); - iput(inode); + btrfs_add_delayed_iput(inode); } cond_resched(); diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h index 4fa20398aec1..1fe1282ef47c 100644 --- a/fs/btrfs/ordered-data.h +++ b/fs/btrfs/ordered-data.h @@ -153,9 +153,10 @@ btrfs_lookup_first_ordered_extent(struct inode * inode, u64 file_offset); int btrfs_ordered_update_i_size(struct inode *inode, u64 offset, struct btrfs_ordered_extent *ordered); int btrfs_find_ordered_sum(struct inode *inode, u64 offset, u64 disk_bytenr, u32 *sum); -int btrfs_wait_ordered_extents(struct btrfs_root *root, int nocow_only); int btrfs_run_ordered_operations(struct btrfs_root *root, int wait); int btrfs_add_ordered_operation(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *inode); +int btrfs_wait_ordered_extents(struct btrfs_root *root, + int nocow_only, int delay_iput); #endif diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index f2aa53d2f944..a9728680eca8 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3541,8 +3541,8 @@ int btrfs_relocate_block_group(struct btrfs_root *extent_root, u64 group_start) (unsigned long long)rc->block_group->key.objectid, (unsigned long long)rc->block_group->flags); - btrfs_start_delalloc_inodes(fs_info->tree_root); - btrfs_wait_ordered_extents(fs_info->tree_root, 0); + btrfs_start_delalloc_inodes(fs_info->tree_root, 0); + btrfs_wait_ordered_extents(fs_info->tree_root, 0, 0); while (1) { rc->extents_found = 0; diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 752a5463bf53..270cc96b9a43 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -405,8 +405,8 @@ int btrfs_sync_fs(struct super_block *sb, int wait) return 0; } - btrfs_start_delalloc_inodes(root); - btrfs_wait_ordered_extents(root, 0); + btrfs_start_delalloc_inodes(root, 0); + btrfs_wait_ordered_extents(root, 0, 0); trans = btrfs_start_transaction(root, 1); ret = btrfs_commit_transaction(trans, root); diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 728e8fe5d2cc..75b31caade29 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -333,6 +333,9 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans, memset(trans, 0, sizeof(*trans)); kmem_cache_free(btrfs_trans_handle_cachep, trans); + if (throttle) + btrfs_run_delayed_iputs(root); + return 0; } @@ -991,11 +994,11 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, mutex_unlock(&root->fs_info->trans_mutex); if (flush_on_commit) { - btrfs_start_delalloc_inodes(root); - ret = btrfs_wait_ordered_extents(root, 0); + btrfs_start_delalloc_inodes(root, 1); + ret = btrfs_wait_ordered_extents(root, 0, 1); BUG_ON(ret); } else if (snap_pending) { - ret = btrfs_wait_ordered_extents(root, 1); + ret = btrfs_wait_ordered_extents(root, 0, 1); BUG_ON(ret); } @@ -1113,6 +1116,10 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, current->journal_info = NULL; kmem_cache_free(btrfs_trans_handle_cachep, trans); + + if (current != root->fs_info->transaction_kthread) + btrfs_run_delayed_iputs(root); + return ret; } -- GitLab From 55ef68990029fcd8d04d42fc184aa7fb18cf309e Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 12 Nov 2009 09:36:44 +0000 Subject: [PATCH 361/618] Btrfs: Fix btrfs_drop_extent_cache for skip pinned case The check for skip pinned case is wrong, it may breaks the while loop too soon. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/file.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 3d2e45ce5d25..3bfe9f03990b 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -179,18 +179,14 @@ int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end, } flags = em->flags; if (skip_pinned && test_bit(EXTENT_FLAG_PINNED, &em->flags)) { - if (em->start <= start && - (!testend || em->start + em->len >= start + len)) { + if (testend && em->start + em->len >= start + len) { free_extent_map(em); write_unlock(&em_tree->lock); break; } - if (start < em->start) { - len = em->start - start; - } else { + start = em->start + em->len; + if (testend) len = start + len - (em->start + em->len); - start = em->start + em->len; - } free_extent_map(em); write_unlock(&em_tree->lock); continue; -- GitLab From 86b9f2eca5e0984145e3c7698a7cd6dd65c2a93f Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 12 Nov 2009 09:36:50 +0000 Subject: [PATCH 362/618] Btrfs: Fix per root used space accounting The bytes_used field in root item was originally planned to trace the amount of used data and tree blocks. But it never worked right since we can't trace freeing of data accurately. This patch changes it to only trace the amount of tree blocks. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 31 ++++++++++++++----------------- fs/btrfs/ctree.h | 4 ++++ fs/btrfs/extent-tree.c | 31 +++++++++++++++++++++++-------- fs/btrfs/ioctl.c | 2 +- fs/btrfs/transaction.c | 6 +++++- 5 files changed, 47 insertions(+), 27 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 9d4ba3470c17..c4bc570a396e 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -456,9 +456,8 @@ static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans, extent_buffer_get(cow); spin_unlock(&root->node_lock); - btrfs_free_extent(trans, root, buf->start, buf->len, - parent_start, root->root_key.objectid, - level, 0); + btrfs_free_tree_block(trans, root, buf->start, buf->len, + parent_start, root->root_key.objectid, level); free_extent_buffer(buf); add_root_to_dirty_list(root); } else { @@ -473,9 +472,8 @@ static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans, btrfs_set_node_ptr_generation(parent, parent_slot, trans->transid); btrfs_mark_buffer_dirty(parent); - btrfs_free_extent(trans, root, buf->start, buf->len, - parent_start, root->root_key.objectid, - level, 0); + btrfs_free_tree_block(trans, root, buf->start, buf->len, + parent_start, root->root_key.objectid, level); } if (unlock_orig) btrfs_tree_unlock(buf); @@ -1035,8 +1033,8 @@ static noinline int balance_level(struct btrfs_trans_handle *trans, btrfs_tree_unlock(mid); /* once for the path */ free_extent_buffer(mid); - ret = btrfs_free_extent(trans, root, mid->start, mid->len, - 0, root->root_key.objectid, level, 1); + ret = btrfs_free_tree_block(trans, root, mid->start, mid->len, + 0, root->root_key.objectid, level); /* once for the root ptr */ free_extent_buffer(mid); return ret; @@ -1100,10 +1098,10 @@ static noinline int balance_level(struct btrfs_trans_handle *trans, 1); if (wret) ret = wret; - wret = btrfs_free_extent(trans, root, bytenr, - blocksize, 0, - root->root_key.objectid, - level, 0); + wret = btrfs_free_tree_block(trans, root, + bytenr, blocksize, 0, + root->root_key.objectid, + level); if (wret) ret = wret; } else { @@ -1148,9 +1146,8 @@ static noinline int balance_level(struct btrfs_trans_handle *trans, wret = del_ptr(trans, root, path, level + 1, pslot); if (wret) ret = wret; - wret = btrfs_free_extent(trans, root, bytenr, blocksize, - 0, root->root_key.objectid, - level, 0); + wret = btrfs_free_tree_block(trans, root, bytenr, blocksize, + 0, root->root_key.objectid, level); if (wret) ret = wret; } else { @@ -3794,8 +3791,8 @@ static noinline int btrfs_del_leaf(struct btrfs_trans_handle *trans, */ btrfs_unlock_up_safe(path, 0); - ret = btrfs_free_extent(trans, root, leaf->start, leaf->len, - 0, root->root_key.objectid, 0, 0); + ret = btrfs_free_tree_block(trans, root, leaf->start, leaf->len, + 0, root->root_key.objectid, 0); return ret; } /* diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 1983c889bb1c..9f806dd04c27 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1982,6 +1982,10 @@ struct extent_buffer *btrfs_alloc_free_block(struct btrfs_trans_handle *trans, u64 parent, u64 root_objectid, struct btrfs_disk_key *key, int level, u64 hint, u64 empty_size); +int btrfs_free_tree_block(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + u64 bytenr, u32 blocksize, + u64 parent, u64 root_objectid, int level); struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans, struct btrfs_root *root, u64 bytenr, u32 blocksize, diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index fcdccfa46004..44d7a322ec28 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3454,14 +3454,6 @@ static int update_block_group(struct btrfs_trans_handle *trans, else old_val -= num_bytes; btrfs_set_super_bytes_used(&info->super_copy, old_val); - - /* block accounting for root item */ - old_val = btrfs_root_used(&root->root_item); - if (alloc) - old_val += num_bytes; - else - old_val -= num_bytes; - btrfs_set_root_used(&root->root_item, old_val); spin_unlock(&info->delalloc_lock); while (total) { @@ -4049,6 +4041,21 @@ int btrfs_free_extent(struct btrfs_trans_handle *trans, return ret; } +int btrfs_free_tree_block(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + u64 bytenr, u32 blocksize, + u64 parent, u64 root_objectid, int level) +{ + u64 used; + spin_lock(&root->node_lock); + used = btrfs_root_used(&root->root_item) - blocksize; + btrfs_set_root_used(&root->root_item, used); + spin_unlock(&root->node_lock); + + return btrfs_free_extent(trans, root, bytenr, blocksize, + parent, root_objectid, level, 0); +} + static u64 stripe_align(struct btrfs_root *root, u64 val) { u64 mask = ((u64)root->stripesize - 1); @@ -4897,6 +4904,14 @@ static int alloc_tree_block(struct btrfs_trans_handle *trans, extent_op); BUG_ON(ret); } + + if (root_objectid == root->root_key.objectid) { + u64 used; + spin_lock(&root->node_lock); + used = btrfs_root_used(&root->root_item) + num_bytes; + btrfs_set_root_used(&root->root_item, used); + spin_unlock(&root->node_lock); + } return ret; } diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 3d6b33871afe..645a17927a8f 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -289,7 +289,7 @@ static noinline int create_subvol(struct btrfs_root *root, btrfs_set_root_generation(&root_item, trans->transid); btrfs_set_root_level(&root_item, 0); btrfs_set_root_refs(&root_item, 1); - btrfs_set_root_used(&root_item, 0); + btrfs_set_root_used(&root_item, leaf->len); btrfs_set_root_last_snapshot(&root_item, 0); memset(&root_item.drop_progress, 0, sizeof(root_item.drop_progress)); diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 75b31caade29..b2acc79f1b34 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -501,13 +501,16 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans, { int ret; u64 old_root_bytenr; + u64 old_root_used; struct btrfs_root *tree_root = root->fs_info->tree_root; + old_root_used = btrfs_root_used(&root->root_item); btrfs_write_dirty_block_groups(trans, root); while (1) { old_root_bytenr = btrfs_root_bytenr(&root->root_item); - if (old_root_bytenr == root->node->start) + if (old_root_bytenr == root->node->start && + old_root_used == btrfs_root_used(&root->root_item)) break; btrfs_set_root_node(&root->root_item, root->node); @@ -516,6 +519,7 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans, &root->root_item); BUG_ON(ret); + old_root_used = btrfs_root_used(&root->root_item); ret = btrfs_write_dirty_block_groups(trans, root); BUG_ON(ret); } -- GitLab From 06b2331f8333ec6edf41662757ce8882cc1747d5 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 26 Nov 2009 09:31:11 +0000 Subject: [PATCH 363/618] Btrfs: don't add extent 0 to the free space cache v2 If block group 0 is completely free, btrfs_read_block_groups will add extent [0, BTRFS_SUPER_INFO_OFFSET) to the free space cache. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 44d7a322ec28..39761ca07f15 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -195,6 +195,14 @@ static int exclude_super_stripes(struct btrfs_root *root, int stripe_len; int i, nr, ret; + if (cache->key.objectid < BTRFS_SUPER_INFO_OFFSET) { + stripe_len = BTRFS_SUPER_INFO_OFFSET - cache->key.objectid; + cache->bytes_super += stripe_len; + ret = add_excluded_extent(root, cache->key.objectid, + stripe_len); + BUG_ON(ret); + } + for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) { bytenr = btrfs_sb_offset(i); ret = btrfs_rmap_block(&root->fs_info->mapping_tree, @@ -255,7 +263,7 @@ static u64 add_new_free_space(struct btrfs_block_group_cache *block_group, if (ret) break; - if (extent_start == start) { + if (extent_start <= start) { start = extent_end + 1; } else if (extent_start > start && extent_start < end) { size = extent_start - start; -- GitLab From a7a3f7cadd9bdee569243f7ead9550aa16b60e07 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Sat, 7 Nov 2009 06:19:16 +0000 Subject: [PATCH 364/618] Btrfs: fail mount on bad mount options We shouldn't silently ignore unrecognized options. Signed-off-by: Sage Weil Signed-off-by: Chris Mason --- fs/btrfs/super.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 270cc96b9a43..193d920e54eb 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -128,6 +128,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) substring_t args[MAX_OPT_ARGS]; char *p, *num; int intarg; + int ret = 0; if (!options) return 0; @@ -262,12 +263,18 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) case Opt_discard: btrfs_set_opt(info->mount_opt, DISCARD); break; + case Opt_err: + printk(KERN_INFO "btrfs: unrecognized mount option " + "'%s'\n", p); + ret = -EINVAL; + goto out; default: break; } } +out: kfree(options); - return 0; + return ret; } /* -- GitLab From 4a8be425a8fb8fbb5d881eb55fa6634c3463b9c9 Mon Sep 17 00:00:00 2001 From: TARUISI Hiroaki Date: Thu, 12 Nov 2009 07:14:26 +0000 Subject: [PATCH 365/618] Btrfs: deny sys_link across subvolumes. I rebased Christian Parpart's patch to deny hard link across subvolumes. Original patch modifies also btrfs_rename, but I excluded it because we can move across subvolumes now and it make no problem. ----------------- Hard link across subvolumes should not allowed in Btrfs. btrfs_link checks root of 'to' directory is same as root of 'from' file. If not same, btrfs_link returns -EPERM. Signed-off-by: TARUISI Hiroaki Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 168e8c040aab..da76cad92ecf 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4462,6 +4462,10 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir, if (inode->i_nlink == 0) return -ENOENT; + /* do not allow sys_link's with other subvols of the same device */ + if (root->objectid != BTRFS_I(inode)->root->objectid) + return -EPERM; + /* * 1 item for inode ref * 2 items for dir items -- GitLab From 20a5239a5d0f340e29827a6a2d28a138001c44b8 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 14 Dec 2009 22:01:12 +0000 Subject: [PATCH 366/618] Btrfs: Show discard option in /proc/mounts Christoph's patch e244a0aeb6a599c19a7c802cda6e2d67c847b154 doesn't display the discard option in /proc/mounts, leading to some confusion for me. Here's the missing bit. Signed-off-by: Matthew Wilcox Signed-off-by: Chris Mason --- fs/btrfs/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 193d920e54eb..3f9b45704fcd 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -457,6 +457,8 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_puts(seq, ",notreelog"); if (btrfs_test_opt(root, FLUSHONCOMMIT)) seq_puts(seq, ",flushoncommit"); + if (btrfs_test_opt(root, DISCARD)) + seq_puts(seq, ",discard"); if (!(root->fs_info->sb->s_flags & MS_POSIXACL)) seq_puts(seq, ",noacl"); return 0; -- GitLab From 83d3c9696fed237a3d96fce18299e2fcf112109f Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 7 Dec 2009 21:45:59 +0000 Subject: [PATCH 367/618] Btrfs: make metadata chunks smaller This patch makes us a bit less zealous about making sure we have enough free metadata space by pearing down the size of new metadata chunks to 256mb instead of 1gb. Also, we used to try an allocate metadata chunks when allocating data, but that sort of thing is done elsewhere now so we can just remove it. With my -ENOSPC test I used to have 3gb reserved for metadata out of 75gb, now I have 1.7gb. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 11 +---------- fs/btrfs/volumes.c | 2 +- 2 files changed, 2 insertions(+), 11 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 39761ca07f15..56e50137d0e6 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4593,7 +4593,6 @@ int btrfs_reserve_extent(struct btrfs_trans_handle *trans, { int ret; u64 search_start = 0; - struct btrfs_fs_info *info = root->fs_info; data = btrfs_get_alloc_profile(root, data); again: @@ -4601,17 +4600,9 @@ int btrfs_reserve_extent(struct btrfs_trans_handle *trans, * the only place that sets empty_size is btrfs_realloc_node, which * is not called recursively on allocations */ - if (empty_size || root->ref_cows) { - if (!(data & BTRFS_BLOCK_GROUP_METADATA)) { - ret = do_chunk_alloc(trans, root->fs_info->extent_root, - 2 * 1024 * 1024, - BTRFS_BLOCK_GROUP_METADATA | - (info->metadata_alloc_profile & - info->avail_metadata_alloc_bits), 0); - } + if (empty_size || root->ref_cows) ret = do_chunk_alloc(trans, root->fs_info->extent_root, num_bytes + 2 * 1024 * 1024, data, 0); - } WARN_ON(num_bytes < root->sectorsize); ret = find_free_extent(trans, root, num_bytes, empty_size, diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 7eda483d7b5a..198cff28766d 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2209,7 +2209,7 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, max_chunk_size = 10 * calc_size; min_stripe_size = 64 * 1024 * 1024; } else if (type & BTRFS_BLOCK_GROUP_METADATA) { - max_chunk_size = 4 * calc_size; + max_chunk_size = 256 * 1024 * 1024; min_stripe_size = 32 * 1024 * 1024; } else if (type & BTRFS_BLOCK_GROUP_SYSTEM) { calc_size = 8 * 1024 * 1024; -- GitLab From 971beb83aeb2a309175682cf5683d64fd4591841 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 7 Dec 2009 14:23:21 +0100 Subject: [PATCH 368/618] Bluetooth: Fix PTR_ERR return of wrong pointer in hidp_setup_hid() Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin Signed-off-by: Marcel Holtmann --- net/bluetooth/hidp/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 569750010fd3..18e7f5a43dc4 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -770,7 +770,7 @@ static int hidp_setup_hid(struct hidp_session *session, hid = hid_allocate_device(); if (IS_ERR(hid)) - return PTR_ERR(session->hid); + return PTR_ERR(hid); session->hid = hid; session->req = req; -- GitLab From 186de9a33803c7ee20d9af75c9049b50e68a3a08 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Tue, 15 Dec 2009 15:56:34 -0200 Subject: [PATCH 369/618] Bluetooth: Fix unset of RemoteBusy flag for L2CAP RemoteBusy flag need to be unset before l2cap_ertm_send(), otherwise l2cap_ertm_send() will return without sending packets because it checks that flag before start sending. Signed-off-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 5129b88c8e5b..7db9a1f8f882 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -3435,8 +3435,8 @@ static inline int l2cap_data_channel_sframe(struct sock *sk, u16 rx_control, str (pi->unacked_frames > 0)) __mod_retrans_timer(); - l2cap_ertm_send(sk); pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY; + l2cap_ertm_send(sk); } break; -- GitLab From 186ee8cf0130993dea8ab8867ff1af8a148f9ae6 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Tue, 15 Dec 2009 20:13:27 -0200 Subject: [PATCH 370/618] Bluetooth: Ack L2CAP I-frames before retransmit missing packet Moving the Ack to before l2cap_retransmit_frame() we can avoid the case where txWindow is full and the packet can't be retransmited. Signed-off-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 7db9a1f8f882..fb0f81d99f96 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -3471,9 +3471,9 @@ static inline int l2cap_data_channel_sframe(struct sock *sk, u16 rx_control, str pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY; if (rx_control & L2CAP_CTRL_POLL) { - l2cap_retransmit_frame(sk, tx_seq); pi->expected_ack_seq = tx_seq; l2cap_drop_acked_frames(sk); + l2cap_retransmit_frame(sk, tx_seq); l2cap_ertm_send(sk); if (pi->conn_state & L2CAP_CONN_WAIT_F) { pi->srej_save_reqseq = tx_seq; -- GitLab From b13f5860447a98daf0358a51fbff66154ac0663a Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Tue, 15 Dec 2009 11:38:04 +0200 Subject: [PATCH 371/618] Bluetooth: Fix L2CAP locking scheme regression When locking was introduced the error path branch was not taken into account. Error was found in sparse code checking. Kudos to Jani Nikula. Signed-off-by: Andrei Emeltchenko Acked-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index fb0f81d99f96..1120cf14a548 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -1212,6 +1212,7 @@ static void l2cap_monitor_timeout(unsigned long arg) bh_lock_sock(sk); if (l2cap_pi(sk)->retry_count >= l2cap_pi(sk)->remote_max_tx) { l2cap_send_disconn_req(l2cap_pi(sk)->conn, sk); + bh_unlock_sock(sk); return; } -- GitLab From 652fd781a52ad6e24b908cd8b83d12699754f253 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 16 Dec 2009 19:23:43 +0100 Subject: [PATCH 372/618] Bluetooth: Prevent ill-timed autosuspend in USB driver The device must be marked busy as it receives data. Signed-off-by: Oliver Neukum Tested-by: Matthew Garrett Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 4d2905996751..a699f09ddf7c 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -307,6 +307,7 @@ static void btusb_bulk_complete(struct urb *urb) return; usb_anchor_urb(urb, &data->bulk_anchor); + usb_mark_last_busy(data->udev); err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { -- GitLab From 3a1abec9f6880cf406593c392636199ea1c6c917 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 17 Dec 2009 15:47:17 -0500 Subject: [PATCH 373/618] Btrfs: make sure fallocate properly starts a transaction The recent patch to make fallocate enospc friendly would send down a NULL trans handle to the allocator. This moves the transaction start to properly fix things. Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index da76cad92ecf..5440bab23635 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5802,23 +5802,23 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end, while (num_bytes > 0) { alloc_size = min(num_bytes, root->fs_info->max_extent); + trans = btrfs_start_transaction(root, 1); + ret = btrfs_reserve_extent(trans, root, alloc_size, root->sectorsize, 0, alloc_hint, (u64)-1, &ins, 1); if (ret) { WARN_ON(1); - break; + goto stop_trans; } ret = btrfs_reserve_metadata_space(root, 3); if (ret) { btrfs_free_reserved_extent(root, ins.objectid, ins.offset); - break; + goto stop_trans; } - trans = btrfs_start_transaction(root, 1); - ret = insert_reserved_file_extent(trans, inode, cur_offset, ins.objectid, ins.offset, ins.offset, @@ -5847,6 +5847,11 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end, btrfs_unreserve_metadata_space(root, 3); } return ret; + +stop_trans: + btrfs_end_transaction(trans, root); + return ret; + } static long btrfs_fallocate(struct inode *inode, int mode, -- GitLab From a2770d86b33024f71df269fde2de096df89d6a48 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 17 Dec 2009 12:51:05 -0800 Subject: [PATCH 374/618] Revert "fix mismerge with Trond's stuff (create_mnt_ns() export is gone now)" This reverts commit e9496ff46a20a8592fdc7bdaaf41b45eb808d310. Quoth Al: "it's dependent on a lot of other stuff not currently in mainline and badly broken with current fs/namespace.c. Sorry, badly out-of-order cherry-pick from old queue. PS: there's a large pending series reworking the refcounting and lifetime rules for vfsmounts that will, among other things, allow to rip a subtree away _without_ dissolving connections in it, to be garbage-collected when all active references are gone. It's considerably saner wrt "is the subtree busy" logics, but it's nowhere near being ready for merge at the moment; this changeset is one of the things becoming possible with that sucker, but it certainly shouldn't have been picked during this cycle. My apologies..." Noticed-by: Eric Paris Requested-by: Al Viro Signed-off-by: Linus Torvalds --- fs/namespace.c | 3 ++- fs/nfs/super.c | 8 ++++++++ include/linux/mnt_namespace.h | 1 + 3 files changed, 11 insertions(+), 1 deletion(-) diff --git a/fs/namespace.c b/fs/namespace.c index faab1273281e..7d70d63ceb29 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -2068,7 +2068,7 @@ struct mnt_namespace *copy_mnt_ns(unsigned long flags, struct mnt_namespace *ns, * create_mnt_ns - creates a private namespace and adds a root filesystem * @mnt: pointer to the new root filesystem mountpoint */ -static struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt) +struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt) { struct mnt_namespace *new_ns; @@ -2080,6 +2080,7 @@ static struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt) } return new_ns; } +EXPORT_SYMBOL(create_mnt_ns); SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name, char __user *, type, unsigned long, flags, void __user *, data) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index d5b112bcf3de..ce907efc5508 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2648,13 +2648,21 @@ static void nfs_fix_devname(const struct path *path, struct vfsmount *mnt) static int nfs_follow_remote_path(struct vfsmount *root_mnt, const char *export_path, struct vfsmount *mnt_target) { + struct mnt_namespace *ns_private; struct nameidata nd; struct super_block *s; int ret; + ns_private = create_mnt_ns(root_mnt); + ret = PTR_ERR(ns_private); + if (IS_ERR(ns_private)) + goto out_mntput; + ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt, export_path, LOOKUP_FOLLOW, &nd); + put_mnt_ns(ns_private); + if (ret != 0) goto out_err; diff --git a/include/linux/mnt_namespace.h b/include/linux/mnt_namespace.h index d9ebf1037dfa..d74785c2393a 100644 --- a/include/linux/mnt_namespace.h +++ b/include/linux/mnt_namespace.h @@ -23,6 +23,7 @@ struct proc_mounts { struct fs_struct; +extern struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt); extern struct mnt_namespace *copy_mnt_ns(unsigned long, struct mnt_namespace *, struct fs_struct *); extern void put_mnt_ns(struct mnt_namespace *ns); -- GitLab From b6e3224fb20954f155e41ec5709b2ab70b50ae2d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 17 Dec 2009 13:23:24 -0800 Subject: [PATCH 375/618] Revert "task_struct: make journal_info conditional" This reverts commit e4c570c4cb7a95dbfafa3d016d2739bf3fdfe319, as requested by Alexey: "I think I gave a good enough arguments to not merge it. To iterate: * patch makes impossible to start using ext3 on EXT3_FS=n kernels without reboot. * this is done only for one pointer on task_struct" None of config options which define task_struct are tristate directly or effectively." Requested-by: Alexey Dobriyan Acked-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/Kconfig | 4 ---- fs/btrfs/Kconfig | 1 - fs/ext4/Kconfig | 1 - fs/gfs2/Kconfig | 1 - fs/jbd/Kconfig | 1 - fs/jbd2/Kconfig | 1 - fs/nilfs2/Kconfig | 1 - fs/reiserfs/Kconfig | 1 - include/linux/init_task.h | 8 +------- include/linux/sched.h | 2 -- 10 files changed, 1 insertion(+), 20 deletions(-) diff --git a/fs/Kconfig b/fs/Kconfig index f8fccaaad628..64d44efad7a5 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -6,10 +6,6 @@ menu "File systems" if BLOCK -config FS_JOURNAL_INFO - bool - default n - source "fs/ext2/Kconfig" source "fs/ext3/Kconfig" source "fs/ext4/Kconfig" diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig index 402afe0a0bfb..7bb3c020e570 100644 --- a/fs/btrfs/Kconfig +++ b/fs/btrfs/Kconfig @@ -4,7 +4,6 @@ config BTRFS_FS select LIBCRC32C select ZLIB_INFLATE select ZLIB_DEFLATE - select FS_JOURNAL_INFO help Btrfs is a new filesystem with extents, writable snapshotting, support for multiple devices and many more features. diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig index e5f6774846e4..9acf7e808139 100644 --- a/fs/ext4/Kconfig +++ b/fs/ext4/Kconfig @@ -2,7 +2,6 @@ config EXT4_FS tristate "The Extended 4 (ext4) filesystem" select JBD2 select CRC16 - select FS_JOURNAL_INFO help This is the next generation of the ext3 filesystem. diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig index b192c661caa6..4dcddf83326f 100644 --- a/fs/gfs2/Kconfig +++ b/fs/gfs2/Kconfig @@ -10,7 +10,6 @@ config GFS2_FS select SLOW_WORK select QUOTA select QUOTACTL - select FS_JOURNAL_INFO help A cluster filesystem. diff --git a/fs/jbd/Kconfig b/fs/jbd/Kconfig index a8408983abd4..4e28beeed157 100644 --- a/fs/jbd/Kconfig +++ b/fs/jbd/Kconfig @@ -1,6 +1,5 @@ config JBD tristate - select FS_JOURNAL_INFO help This is a generic journalling layer for block devices. It is currently used by the ext3 file system, but it could also be diff --git a/fs/jbd2/Kconfig b/fs/jbd2/Kconfig index 0f7d1ceafdfd..f32f346f4b0a 100644 --- a/fs/jbd2/Kconfig +++ b/fs/jbd2/Kconfig @@ -1,7 +1,6 @@ config JBD2 tristate select CRC32 - select FS_JOURNAL_INFO help This is a generic journaling layer for block devices that support both 32-bit and 64-bit block numbers. It is currently used by diff --git a/fs/nilfs2/Kconfig b/fs/nilfs2/Kconfig index 1225af7b2166..251da07b2a1d 100644 --- a/fs/nilfs2/Kconfig +++ b/fs/nilfs2/Kconfig @@ -2,7 +2,6 @@ config NILFS2_FS tristate "NILFS2 file system support (EXPERIMENTAL)" depends on EXPERIMENTAL select CRC32 - select FS_JOURNAL_INFO help NILFS2 is a log-structured file system (LFS) supporting continuous snapshotting. In addition to versioning capability of the entire diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig index ac7cd75c86f8..513f431038f9 100644 --- a/fs/reiserfs/Kconfig +++ b/fs/reiserfs/Kconfig @@ -1,7 +1,6 @@ config REISERFS_FS tristate "Reiserfs support" select CRC32 - select FS_JOURNAL_INFO help Stores not just filenames but the files themselves in a balanced tree. Uses journalling. diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 5ed8b9c50355..abec69b63d7e 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -111,12 +111,6 @@ extern struct cred init_cred; # define INIT_PERF_EVENTS(tsk) #endif -#ifdef CONFIG_FS_JOURNAL_INFO -#define INIT_JOURNAL_INFO .journal_info = NULL, -#else -#define INIT_JOURNAL_INFO -#endif - /* * INIT_TASK is used to set up the first task table, touch at * your own risk!. Base=0, limit=0x1fffff (=2MB) @@ -168,6 +162,7 @@ extern struct cred init_cred; .signal = {{0}}}, \ .blocked = {{0}}, \ .alloc_lock = __SPIN_LOCK_UNLOCKED(tsk.alloc_lock), \ + .journal_info = NULL, \ .cpu_timers = INIT_CPU_TIMERS(tsk.cpu_timers), \ .fs_excl = ATOMIC_INIT(0), \ .pi_lock = __RAW_SPIN_LOCK_UNLOCKED(tsk.pi_lock), \ @@ -178,7 +173,6 @@ extern struct cred init_cred; [PIDTYPE_SID] = INIT_PID_LINK(PIDTYPE_SID), \ }, \ .dirties = INIT_PROP_LOCAL_SINGLE(dirties), \ - INIT_JOURNAL_INFO \ INIT_IDS \ INIT_PERF_EVENTS(tsk) \ INIT_TRACE_IRQFLAGS \ diff --git a/include/linux/sched.h b/include/linux/sched.h index 244c287a5ac1..211ed32befbd 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1446,10 +1446,8 @@ struct task_struct { gfp_t lockdep_reclaim_gfp; #endif -#ifdef CONFIG_FS_JOURNAL_INFO /* journalling filesystem info */ void *journal_info; -#endif /* stacked block device info */ struct bio *bio_list, **bio_tail; -- GitLab From 6c56ccecf05fafe100ab4ea94f6fccbf5ff00db7 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Thu, 17 Dec 2009 12:27:02 -0800 Subject: [PATCH 376/618] x86: Reenable TSC sync check at boot, even with NONSTOP_TSC Commit 83ce4009 did the following change If the TSC is constant and non-stop, also set it reliable. But, there seems to be few systems that will end up with TSC warp across sockets, depending on how the cpus come out of reset. Skipping TSC sync test on such systems may result in time inconsistency later. So, reenable TSC sync test even on constant and non-stop TSC systems. Set, sched_clock_stable to 1 by default and reset it in mark_tsc_unstable, if TSC sync fails. This change still gives perf benefit mentioned in 83ce4009 for systems where TSC is reliable. Signed-off-by: Venkatesh Pallipadi Acked-by: Suresh Siddha LKML-Reference: <20091217202702.GA18015@linux-os.sc.intel.com> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/intel.c | 1 - arch/x86/kernel/tsc.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 9c31e8b09d2c..879666f4d871 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -70,7 +70,6 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) if (c->x86_power & (1 << 8)) { set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC); - set_cpu_cap(c, X86_FEATURE_TSC_RELIABLE); sched_clock_stable = 1; } diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index cd982f48e23e..597683aa5ba0 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -763,6 +763,7 @@ void mark_tsc_unstable(char *reason) { if (!tsc_unstable) { tsc_unstable = 1; + sched_clock_stable = 0; printk(KERN_INFO "Marking TSC unstable due to %s\n", reason); /* Change only the rating, when not registered */ if (clocksource_tsc.mult) -- GitLab From 8c63450718ea62ee3a70bffde170b4d15fc72d3c Mon Sep 17 00:00:00 2001 From: "akpm@linux-foundation.org" Date: Thu, 17 Dec 2009 15:26:36 -0800 Subject: [PATCH 377/618] x86: Fix objdump version check in arch/x86/tools/chkobjdump.awk It says Warning: objdump version is older than 2.19 Warning: Skipping posttest. because it used the wrong field from `objdump -v': akpm:/usr/src/25> /opt/crosstool/gcc-4.0.2-glibc-2.3.6/x86_64-unknown-linux-gnu/bin/x86_64-unknown-linux-gnu-objdump -v GNU objdump 2.16.1 Copyright 2005 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License. This program has absolutely no warranty. Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Andrew Morton LKML-Reference: <200912172326.nBHNQaQl024796@imap1.linux-foundation.org> Signed-off-by: H. Peter Anvin Cc: Masami Hiramatsu --- arch/x86/tools/chkobjdump.awk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/tools/chkobjdump.awk b/arch/x86/tools/chkobjdump.awk index 0d13cd9fdcff..5bbb5a33f220 100644 --- a/arch/x86/tools/chkobjdump.awk +++ b/arch/x86/tools/chkobjdump.awk @@ -9,7 +9,7 @@ BEGIN { } /^GNU/ { - split($4, ver, "."); + split($3, ver, "."); if (ver[1] > od_ver || (ver[1] == od_ver && ver[2] >= od_sver)) { exit 1; -- GitLab From 3e26120cc7c819c97bc07281ca1fb9017cfe9a39 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Thu, 17 Dec 2009 15:27:05 -0800 Subject: [PATCH 378/618] kernel/sysctl.c: fix the incomplete part of sysctl_max_map_count-should-be-non-negative.patch It is a mistake that we used 'proc_dointvec', it should be 'proc_dointvec_minmax', as in the original patch. Signed-off-by: WANG Cong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/sysctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 45e4bef0012a..6665761c006d 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1131,7 +1131,7 @@ static struct ctl_table vm_table[] = { .data = &sysctl_max_map_count, .maxlen = sizeof(sysctl_max_map_count), .mode = 0644, - .proc_handler = proc_dointvec, + .proc_handler = proc_dointvec_minmax, .extra1 = &zero, }, #else -- GitLab From 2bf212b9e48e1c35eaf8f0cc1729d7c4a39b7b5a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 17 Dec 2009 15:27:05 -0800 Subject: [PATCH 379/618] cs5535: CS5535_MFGPT_DEFAULT_IRQ should depend on CS5535_MFGPT It doesn't make much sense to have CS5535_MFGPT_DEFAULT_IRQ show up in configs that cannot have CS5535_MFGPT. Signed-off-by: Geert Uytterhoeven Acked-by: Andres Salomon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 1a7a9fc50ea1..e3551d20464f 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -203,6 +203,7 @@ config CS5535_MFGPT config CS5535_MFGPT_DEFAULT_IRQ int + depends on CS5535_MFGPT default 7 help MFGPTs on the CS5535 require an interrupt. The selected IRQ -- GitLab From ec8e2f7466ca370f5e09000ca40a71759afc9ac8 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 17 Dec 2009 15:27:06 -0800 Subject: [PATCH 380/618] reiserfs: truncate blocks not used by a write It can happen that write does not use all the blocks allocated in write_begin either because of some filesystem error (like ENOSPC) or because page with data to write has been removed from memory. We truncate these blocks so that we don't have dangling blocks beyond i_size. Cc: Jeff Mahoney Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/reiserfs/inode.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 3a28e7751b3c..290ae38fca8a 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -2538,6 +2538,12 @@ static int reiserfs_writepage(struct page *page, struct writeback_control *wbc) return reiserfs_write_full_page(page, wbc); } +static void reiserfs_truncate_failed_write(struct inode *inode) +{ + truncate_inode_pages(inode->i_mapping, inode->i_size); + reiserfs_truncate_file(inode, 0); +} + static int reiserfs_write_begin(struct file *file, struct address_space *mapping, loff_t pos, unsigned len, unsigned flags, @@ -2604,6 +2610,8 @@ static int reiserfs_write_begin(struct file *file, if (ret) { unlock_page(page); page_cache_release(page); + /* Truncate allocated blocks */ + reiserfs_truncate_failed_write(inode); } return ret; } @@ -2701,9 +2709,7 @@ static int reiserfs_write_end(struct file *file, struct address_space *mapping, ** transaction tracking stuff when the size changes. So, we have ** to do the i_size updates here. */ - pos += copied; - - if (pos > inode->i_size) { + if (pos + copied > inode->i_size) { struct reiserfs_transaction_handle myth; lock_depth = reiserfs_write_lock_once(inode->i_sb); locked = true; @@ -2721,7 +2727,7 @@ static int reiserfs_write_end(struct file *file, struct address_space *mapping, goto journal_error; reiserfs_update_inode_transaction(inode); - inode->i_size = pos; + inode->i_size = pos + copied; /* * this will just nest into our transaction. It's important * to use mark_inode_dirty so the inode gets pushed around on the @@ -2751,6 +2757,10 @@ static int reiserfs_write_end(struct file *file, struct address_space *mapping, reiserfs_write_unlock_once(inode->i_sb, lock_depth); unlock_page(page); page_cache_release(page); + + if (pos + len > inode->i_size) + reiserfs_truncate_failed_write(inode); + return ret == 0 ? copied : ret; journal_error: -- GitLab From 312ea07bf067d41b339473e696f9199245d762f3 Mon Sep 17 00:00:00 2001 From: Samu Onkalo Date: Thu, 17 Dec 2009 15:27:07 -0800 Subject: [PATCH 381/618] hwmon: I2C bus support for lis3lv02d and variant accelerometer chips MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Samu Onkalo Cc: Éric Piel Cc: Kalhan Trisal Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/Kconfig | 17 ++++ drivers/hwmon/Makefile | 1 + drivers/hwmon/lis3lv02d_i2c.c | 183 ++++++++++++++++++++++++++++++++++ 3 files changed, 201 insertions(+) create mode 100644 drivers/hwmon/lis3lv02d_i2c.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 95ccbe377f9c..bf28945c610d 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -998,6 +998,23 @@ config SENSORS_LIS3_SPI will be called lis3lv02d and a specific module for the SPI transport is called lis3lv02d_spi. +config SENSORS_LIS3_I2C + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" + depends on I2C && INPUT + select INPUT_POLLDEV + default n + help + This driver provides support for the LIS3LV02Dx accelerometer connected + via I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the device to act as a pinball machine-esque joystick. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for the I2C transport + is called lis3lv02d_i2c. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 33c2ee105284..4131e253f96a 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o +obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d.o lis3lv02d_i2c.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM73) += lm73.o diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c new file mode 100644 index 000000000000..dc1f5402c1d7 --- /dev/null +++ b/drivers/hwmon/lis3lv02d_i2c.c @@ -0,0 +1,183 @@ +/* + * drivers/hwmon/lis3lv02d_i2c.c + * + * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer. + * Driver is based on corresponding SPI driver written by Daniel Mack + * (lis3lv02d_spi.c (C) 2009 Daniel Mack ). + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * + * Contact: Samu Onkalo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include "lis3lv02d.h" + +#define DRV_NAME "lis3lv02d_i2c" + +static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value) +{ + struct i2c_client *c = lis3->bus_priv; + return i2c_smbus_write_byte_data(c, reg, value); +} + +static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v) +{ + struct i2c_client *c = lis3->bus_priv; + *v = i2c_smbus_read_byte_data(c, reg); + return 0; +} + +static int lis3_i2c_init(struct lis3lv02d *lis3) +{ + u8 reg; + int ret; + + /* power up the device */ + ret = lis3->read(lis3, CTRL_REG1, ®); + if (ret < 0) + return ret; + + reg |= CTRL1_PD0; + return lis3->write(lis3, CTRL_REG1, reg); +} + +/* Default axis mapping but it can be overwritten by platform data */ +static struct axis_conversion lis3lv02d_axis_map = { LIS3_DEV_X, + LIS3_DEV_Y, + LIS3_DEV_Z }; + +static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret = 0; + struct lis3lv02d_platform_data *pdata = client->dev.platform_data; + + if (pdata) { + if (pdata->axis_x) + lis3lv02d_axis_map.x = pdata->axis_x; + + if (pdata->axis_y) + lis3lv02d_axis_map.y = pdata->axis_y; + + if (pdata->axis_z) + lis3lv02d_axis_map.z = pdata->axis_z; + + if (pdata->setup_resources) + ret = pdata->setup_resources(); + + if (ret) + goto fail; + } + + lis3_dev.pdata = pdata; + lis3_dev.bus_priv = client; + lis3_dev.init = lis3_i2c_init; + lis3_dev.read = lis3_i2c_read; + lis3_dev.write = lis3_i2c_write; + lis3_dev.irq = client->irq; + lis3_dev.ac = lis3lv02d_axis_map; + + i2c_set_clientdata(client, &lis3_dev); + ret = lis3lv02d_init_device(&lis3_dev); +fail: + return ret; +} + +static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + struct lis3lv02d_platform_data *pdata = client->dev.platform_data; + + if (pdata && pdata->release_resources) + pdata->release_resources(); + + lis3lv02d_joystick_disable(); + lis3lv02d_poweroff(lis3); + + return lis3lv02d_remove_fs(&lis3_dev); +} + +#ifdef CONFIG_PM +static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + if (!lis3->pdata->wakeup_flags) + lis3lv02d_poweroff(lis3); + return 0; +} + +static int lis3lv02d_i2c_resume(struct i2c_client *client) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + if (!lis3->pdata->wakeup_flags) + lis3lv02d_poweron(lis3); + return 0; +} + +static void lis3lv02d_i2c_shutdown(struct i2c_client *client) +{ + lis3lv02d_i2c_suspend(client, PMSG_SUSPEND); +} +#else +#define lis3lv02d_i2c_suspend NULL +#define lis3lv02d_i2c_resume NULL +#define lis3lv02d_i2c_shutdown NULL +#endif + +static const struct i2c_device_id lis3lv02d_id[] = { + {"lis3lv02d", 0 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lis3lv02d_id); + +static struct i2c_driver lis3lv02d_i2c_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .suspend = lis3lv02d_i2c_suspend, + .shutdown = lis3lv02d_i2c_shutdown, + .resume = lis3lv02d_i2c_resume, + .probe = lis3lv02d_i2c_probe, + .remove = __devexit_p(lis3lv02d_i2c_remove), + .id_table = lis3lv02d_id, +}; + +static int __init lis3lv02d_init(void) +{ + return i2c_add_driver(&lis3lv02d_i2c_driver); +} + +static void __exit lis3lv02d_exit(void) +{ + i2c_del_driver(&lis3lv02d_i2c_driver); +} + +MODULE_AUTHOR("Nokia Corporation"); +MODULE_DESCRIPTION("lis3lv02d I2C interface"); +MODULE_LICENSE("GPL"); + +module_init(lis3lv02d_init); +module_exit(lis3lv02d_exit); -- GitLab From 0f05058531330854ff383237e1547044c67e5740 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 17 Dec 2009 15:27:09 -0800 Subject: [PATCH 382/618] drivers/video/via/viafbdev.c: correct code taking the size of a pointer sizeof(viafb_gamma_table) is just the size of the pointer. This is changed to the size used when calling kmalloc to initialize the pointer. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // Signed-off-by: Julia Lawall Acked-by: Florian Tobias Schandinat Cc: Joseph Chan Cc: Scott Fang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/via/viafbdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index 10d8c4b4baeb..d8df17a7d5fc 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -680,7 +680,7 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg) if (!viafb_gamma_table) return -ENOMEM; if (copy_from_user(viafb_gamma_table, argp, - sizeof(viafb_gamma_table))) { + 256 * sizeof(u32))) { kfree(viafb_gamma_table); return -EFAULT; } @@ -694,7 +694,7 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg) return -ENOMEM; viafb_get_gamma_table(viafb_gamma_table); if (copy_to_user(argp, viafb_gamma_table, - sizeof(viafb_gamma_table))) { + 256 * sizeof(u32))) { kfree(viafb_gamma_table); return -EFAULT; } -- GitLab From 5d0bb2c4238e333ae18c5cd23f75e02a3dac3519 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Thu, 17 Dec 2009 15:27:11 -0800 Subject: [PATCH 383/618] vt: don't export vt_kmsg_redirect() to userspace Fix following warning in linux-next by guarding the function definition (both the "extern" and the inline) with #ifdef __KERNEL__. usr/include/linux/vt.h:89: userspace cannot call function or variable defined in the kernel Introduced by commit 5ada918b82399eef3afd6a71e3637697d6bd719f ("vt: introduce and use vt_kmsg_redirect() function"). Signed-off-by: Bernhard Walle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vt.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/linux/vt.h b/include/linux/vt.h index 3fb9944e50a6..d5dd0bc408fd 100644 --- a/include/linux/vt.h +++ b/include/linux/vt.h @@ -84,6 +84,8 @@ struct vt_setactivate { #define VT_SETACTIVATE 0x560F /* Activate and set the mode of a console */ +#ifdef __KERNEL__ + #ifdef CONFIG_VT_CONSOLE extern int vt_kmsg_redirect(int new); @@ -97,6 +99,8 @@ static inline int vt_kmsg_redirect(int new) #endif +#endif /* __KERNEL__ */ + #define vt_get_kmsg_redirect() vt_kmsg_redirect(-1) #endif /* _LINUX_VT_H */ -- GitLab From 8a79503aa83d0f889abc64a2fc0a020411837222 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 17 Dec 2009 15:27:12 -0800 Subject: [PATCH 384/618] lib/vsprintf.c: document more vsnprintf extensions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These were added in 9ac6e44 (lib/vsprintf.c: add %pU to print UUID/GUIDs) c7dabef (vsprintf: use %pR, %pr instead of %pRt, %pRf) 8a27f7c (lib/vsprintf.c: Add "%pI6c" - print pointer as compressed ipv6 address) 4aa9960 (printk: add %I4, %I6, %i4, %i6 format specifiers) dd45c9c (printk: add %pM format specifier for MAC addresses) but only added comments to pointer() not vsnprintf() that is refered to by printk's comments. Signed-off-by: Uwe Kleine-König Cc: Harvey Harrison Cc: David S. Miller Cc: Joe Perches Cc: Jens Rosenboom Cc: David S. Miller Cc: Bjorn Helgaas Cc: Jesse Barnes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/vsprintf.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/lib/vsprintf.c b/lib/vsprintf.c index 735343fc857a..d4996cf46eb6 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -1179,7 +1179,18 @@ static int format_decode(const char *fmt, struct printf_spec *spec) * %ps output the name of a text symbol without offset * %pF output the name of a function pointer with its offset * %pf output the name of a function pointer without its offset - * %pR output the address range in a struct resource + * %pR output the address range in a struct resource with decoded flags + * %pr output the address range in a struct resource with raw flags + * %pM output a 6-byte MAC address with colons + * %pm output a 6-byte MAC address without colons + * %pI4 print an IPv4 address without leading zeros + * %pi4 print an IPv4 address with leading zeros + * %pI6 print an IPv6 address with colons + * %pi6 print an IPv6 address without colons + * %pI6c print an IPv6 address as specified by + * http://www.ietf.org/id/draft-kawamura-ipv6-text-representation-03.txt + * %pU[bBlL] print a UUID/GUID in big or little endian using lower or upper + * case. * %n is ignored * * The return value is the number of characters which would -- GitLab From 0f67b0b0392ccca98459bf40b36c0037793b5f71 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 17 Dec 2009 15:27:14 -0800 Subject: [PATCH 385/618] nommu: ramfs: remove unused local var Signed-off-by: Mike Frysinger Cc: David Howells Acked-by: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ramfs/file-nommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c index 32fae4040ebf..2efc57173fd7 100644 --- a/fs/ramfs/file-nommu.c +++ b/fs/ramfs/file-nommu.c @@ -60,7 +60,7 @@ const struct inode_operations ramfs_file_inode_operations = { */ int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize) { - unsigned long npages, xpages, loop, limit; + unsigned long npages, xpages, loop; struct page *pages; unsigned order; void *data; -- GitLab From 9cd80bbb07fcd6d4d037fad4297496d3b132ac6b Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 17 Dec 2009 15:27:15 -0800 Subject: [PATCH 386/618] do_wait() optimization: do not place sub-threads on task_struct->children list Thanks to Roland who pointed out de_thread() issues. Currently we add sub-threads to ->real_parent->children list. This buys nothing but slows down do_wait(). With this patch ->children contains only main threads (group leaders). The only complication is that forget_original_parent() should iterate over sub-threads by hand, and de_thread() needs another list_replace() when it changes ->group_leader. Henceforth do_wait_thread() can never see task_detached() && !EXIT_DEAD tasks, we can remove this check (and we can unify do_wait_thread() and ptrace_do_wait()). This change can confuse the optimistic search in mm_update_next_owner(), but this is fixable and minor. Perhaps badness() and oom_kill_process() should be updated, but they should be fixed in any case. Signed-off-by: Oleg Nesterov Cc: Roland McGrath Cc: Ingo Molnar Cc: Ratan Nalumasu Cc: Vitaly Mayatskikh Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/exec.c | 2 ++ kernel/exit.c | 36 +++++++++++++++++------------------- kernel/fork.c | 2 +- 3 files changed, 20 insertions(+), 20 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index 623a5cc3076a..77db9a97a773 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -826,7 +826,9 @@ static int de_thread(struct task_struct *tsk) attach_pid(tsk, PIDTYPE_PID, task_pid(leader)); transfer_pid(leader, tsk, PIDTYPE_PGID); transfer_pid(leader, tsk, PIDTYPE_SID); + list_replace_rcu(&leader->tasks, &tsk->tasks); + list_replace_init(&leader->sibling, &tsk->sibling); tsk->group_leader = tsk; leader->group_leader = tsk; diff --git a/kernel/exit.c b/kernel/exit.c index 5962d7ccf243..546774a31a66 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -68,10 +68,10 @@ static void __unhash_process(struct task_struct *p) detach_pid(p, PIDTYPE_SID); list_del_rcu(&p->tasks); + list_del_init(&p->sibling); __get_cpu_var(process_counts)--; } list_del_rcu(&p->thread_group); - list_del_init(&p->sibling); } /* @@ -736,12 +736,9 @@ static struct task_struct *find_new_reaper(struct task_struct *father) /* * Any that need to be release_task'd are put on the @dead list. */ -static void reparent_thread(struct task_struct *father, struct task_struct *p, +static void reparent_leader(struct task_struct *father, struct task_struct *p, struct list_head *dead) { - if (p->pdeath_signal) - group_send_sig_info(p->pdeath_signal, SEND_SIG_NOINFO, p); - list_move_tail(&p->sibling, &p->real_parent->children); if (task_detached(p)) @@ -780,12 +777,18 @@ static void forget_original_parent(struct task_struct *father) reaper = find_new_reaper(father); list_for_each_entry_safe(p, n, &father->children, sibling) { - p->real_parent = reaper; - if (p->parent == father) { - BUG_ON(task_ptrace(p)); - p->parent = p->real_parent; - } - reparent_thread(father, p, &dead_children); + struct task_struct *t = p; + do { + t->real_parent = reaper; + if (t->parent == father) { + BUG_ON(task_ptrace(t)); + t->parent = t->real_parent; + } + if (t->pdeath_signal) + group_send_sig_info(t->pdeath_signal, + SEND_SIG_NOINFO, t); + } while_each_thread(p, t); + reparent_leader(father, p, &dead_children); } write_unlock_irq(&tasklist_lock); @@ -1551,14 +1554,9 @@ static int do_wait_thread(struct wait_opts *wo, struct task_struct *tsk) struct task_struct *p; list_for_each_entry(p, &tsk->children, sibling) { - /* - * Do not consider detached threads. - */ - if (!task_detached(p)) { - int ret = wait_consider_task(wo, 0, p); - if (ret) - return ret; - } + int ret = wait_consider_task(wo, 0, p); + if (ret) + return ret; } return 0; diff --git a/kernel/fork.c b/kernel/fork.c index 202a0ba63d3c..5b2959b3ffc2 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1291,7 +1291,6 @@ static struct task_struct *copy_process(unsigned long clone_flags, } if (likely(p->pid)) { - list_add_tail(&p->sibling, &p->real_parent->children); tracehook_finish_clone(p, clone_flags, trace); if (thread_group_leader(p)) { @@ -1303,6 +1302,7 @@ static struct task_struct *copy_process(unsigned long clone_flags, p->signal->tty = tty_kref_get(current->signal->tty); attach_pid(p, PIDTYPE_PGID, task_pgrp(current)); attach_pid(p, PIDTYPE_SID, task_session(current)); + list_add_tail(&p->sibling, &p->real_parent->children); list_add_tail_rcu(&p->tasks, &init_task.tasks); __get_cpu_var(process_counts)++; } -- GitLab From f6151dfea21496d43dbaba32cfcd9c9f404769bc Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 17 Dec 2009 15:27:16 -0800 Subject: [PATCH 387/618] mm: introduce coredump parameter structure Introduce coredump parameter data structure (struct coredump_params) to simplify binfmt->core_dump() arguments. Signed-off-by: Masami Hiramatsu Suggested-by: Ingo Molnar Cc: Hidehiro Kawai Cc: Oleg Nesterov Cc: Roland McGrath Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/binfmt_aout.c | 13 +++++++------ fs/binfmt_elf.c | 24 +++++++++++++----------- fs/binfmt_elf_fdpic.c | 29 +++++++++++++++-------------- fs/binfmt_flat.c | 6 +++--- fs/binfmt_som.c | 2 +- fs/exec.c | 38 +++++++++++++++++++++----------------- include/linux/binfmts.h | 10 +++++++++- 7 files changed, 69 insertions(+), 53 deletions(-) diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c index b639dcf7c778..346b69405363 100644 --- a/fs/binfmt_aout.c +++ b/fs/binfmt_aout.c @@ -32,7 +32,7 @@ static int load_aout_binary(struct linux_binprm *, struct pt_regs * regs); static int load_aout_library(struct file*); -static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit); +static int aout_core_dump(struct coredump_params *cprm); static struct linux_binfmt aout_format = { .module = THIS_MODULE, @@ -89,8 +89,9 @@ if (file->f_op->llseek) { \ * dumping of the process results in another error.. */ -static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit) +static int aout_core_dump(struct coredump_params *cprm) { + struct file *file = cprm->file; mm_segment_t fs; int has_dumped = 0; unsigned long dump_start, dump_size; @@ -108,16 +109,16 @@ static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file, u current->flags |= PF_DUMPCORE; strncpy(dump.u_comm, current->comm, sizeof(dump.u_comm)); dump.u_ar0 = offsetof(struct user, regs); - dump.signal = signr; - aout_dump_thread(regs, &dump); + dump.signal = cprm->signr; + aout_dump_thread(cprm->regs, &dump); /* If the size of the dump file exceeds the rlimit, then see what would happen if we wrote the stack, but not the data area. */ - if ((dump.u_dsize + dump.u_ssize+1) * PAGE_SIZE > limit) + if ((dump.u_dsize + dump.u_ssize+1) * PAGE_SIZE > cprm->limit) dump.u_dsize = 0; /* Make sure we have enough room to write the stack and data areas. */ - if ((dump.u_ssize + 1) * PAGE_SIZE > limit) + if ((dump.u_ssize + 1) * PAGE_SIZE > cprm->limit) dump.u_ssize = 0; /* make sure we actually have a data and stack area to dump */ diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 97b6e9efeb7f..edd90c49003c 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -45,7 +45,7 @@ static unsigned long elf_map(struct file *, unsigned long, struct elf_phdr *, * don't even try. */ #ifdef CONFIG_ELF_CORE -static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit); +static int elf_core_dump(struct coredump_params *cprm); #else #define elf_core_dump NULL #endif @@ -1272,8 +1272,9 @@ static int writenote(struct memelfnote *men, struct file *file, } #undef DUMP_WRITE -#define DUMP_WRITE(addr, nr) \ - if ((size += (nr)) > limit || !dump_write(file, (addr), (nr))) \ +#define DUMP_WRITE(addr, nr) \ + if ((size += (nr)) > cprm->limit || \ + !dump_write(cprm->file, (addr), (nr))) \ goto end_coredump; static void fill_elf_header(struct elfhdr *elf, int segs, @@ -1901,7 +1902,7 @@ static struct vm_area_struct *next_vma(struct vm_area_struct *this_vma, * and then they are actually written out. If we run out of core limit * we just truncate. */ -static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit) +static int elf_core_dump(struct coredump_params *cprm) { int has_dumped = 0; mm_segment_t fs; @@ -1947,7 +1948,7 @@ static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file, un * notes. This also sets up the file header. */ if (!fill_note_info(elf, segs + 1, /* including notes section */ - &info, signr, regs)) + &info, cprm->signr, cprm->regs)) goto cleanup; has_dumped = 1; @@ -2009,14 +2010,14 @@ static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file, un #endif /* write out the notes section */ - if (!write_note_info(&info, file, &foffset)) + if (!write_note_info(&info, cprm->file, &foffset)) goto end_coredump; - if (elf_coredump_extra_notes_write(file, &foffset)) + if (elf_coredump_extra_notes_write(cprm->file, &foffset)) goto end_coredump; /* Align to page */ - if (!dump_seek(file, dataoff - foffset)) + if (!dump_seek(cprm->file, dataoff - foffset)) goto end_coredump; for (vma = first_vma(current, gate_vma); vma != NULL; @@ -2033,12 +2034,13 @@ static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file, un page = get_dump_page(addr); if (page) { void *kaddr = kmap(page); - stop = ((size += PAGE_SIZE) > limit) || - !dump_write(file, kaddr, PAGE_SIZE); + stop = ((size += PAGE_SIZE) > cprm->limit) || + !dump_write(cprm->file, kaddr, + PAGE_SIZE); kunmap(page); page_cache_release(page); } else - stop = !dump_seek(file, PAGE_SIZE); + stop = !dump_seek(cprm->file, PAGE_SIZE); if (stop) goto end_coredump; } diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index 7b055385db8e..c25256a5c5b0 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -76,7 +76,7 @@ static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *, struct file *, struct mm_struct *); #ifdef CONFIG_ELF_CORE -static int elf_fdpic_core_dump(long, struct pt_regs *, struct file *, unsigned long limit); +static int elf_fdpic_core_dump(struct coredump_params *cprm); #endif static struct linux_binfmt elf_fdpic_format = { @@ -1326,8 +1326,9 @@ static int writenote(struct memelfnote *men, struct file *file) #undef DUMP_WRITE #undef DUMP_SEEK -#define DUMP_WRITE(addr, nr) \ - if ((size += (nr)) > limit || !dump_write(file, (addr), (nr))) \ +#define DUMP_WRITE(addr, nr) \ + if ((size += (nr)) > cprm->limit || \ + !dump_write(cprm->file, (addr), (nr))) \ goto end_coredump; static inline void fill_elf_fdpic_header(struct elfhdr *elf, int segs) @@ -1582,8 +1583,7 @@ static int elf_fdpic_dump_segments(struct file *file, size_t *size, * and then they are actually written out. If we run out of core limit * we just truncate. */ -static int elf_fdpic_core_dump(long signr, struct pt_regs *regs, - struct file *file, unsigned long limit) +static int elf_fdpic_core_dump(struct coredump_params *cprm) { #define NUM_NOTES 6 int has_dumped = 0; @@ -1642,7 +1642,7 @@ static int elf_fdpic_core_dump(long signr, struct pt_regs *regs, goto cleanup; #endif - if (signr) { + if (cprm->signr) { struct core_thread *ct; struct elf_thread_status *tmp; @@ -1661,14 +1661,14 @@ static int elf_fdpic_core_dump(long signr, struct pt_regs *regs, int sz; tmp = list_entry(t, struct elf_thread_status, list); - sz = elf_dump_thread_status(signr, tmp); + sz = elf_dump_thread_status(cprm->signr, tmp); thread_status_size += sz; } } /* now collect the dump for the current */ - fill_prstatus(prstatus, current, signr); - elf_core_copy_regs(&prstatus->pr_reg, regs); + fill_prstatus(prstatus, current, cprm->signr); + elf_core_copy_regs(&prstatus->pr_reg, cprm->regs); segs = current->mm->map_count; #ifdef ELF_CORE_EXTRA_PHDRS @@ -1703,7 +1703,7 @@ static int elf_fdpic_core_dump(long signr, struct pt_regs *regs, /* Try to dump the FPU. */ if ((prstatus->pr_fpvalid = - elf_core_copy_task_fpregs(current, regs, fpu))) + elf_core_copy_task_fpregs(current, cprm->regs, fpu))) fill_note(notes + numnote++, "CORE", NT_PRFPREG, sizeof(*fpu), fpu); #ifdef ELF_CORE_COPY_XFPREGS @@ -1774,7 +1774,7 @@ static int elf_fdpic_core_dump(long signr, struct pt_regs *regs, /* write out the notes section */ for (i = 0; i < numnote; i++) - if (!writenote(notes + i, file)) + if (!writenote(notes + i, cprm->file)) goto end_coredump; /* write out the thread status notes section */ @@ -1783,14 +1783,15 @@ static int elf_fdpic_core_dump(long signr, struct pt_regs *regs, list_entry(t, struct elf_thread_status, list); for (i = 0; i < tmp->num_notes; i++) - if (!writenote(&tmp->notes[i], file)) + if (!writenote(&tmp->notes[i], cprm->file)) goto end_coredump; } - if (!dump_seek(file, dataoff)) + if (!dump_seek(cprm->file, dataoff)) goto end_coredump; - if (elf_fdpic_dump_segments(file, &size, &limit, mm_flags) < 0) + if (elf_fdpic_dump_segments(cprm->file, &size, &cprm->limit, + mm_flags) < 0) goto end_coredump; #ifdef ELF_CORE_WRITE_EXTRA_DATA diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c index a2796651e756..d4a00ea1054c 100644 --- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -87,7 +87,7 @@ static int load_flat_shared_library(int id, struct lib_info *p); #endif static int load_flat_binary(struct linux_binprm *, struct pt_regs * regs); -static int flat_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit); +static int flat_core_dump(struct coredump_params *cprm); static struct linux_binfmt flat_format = { .module = THIS_MODULE, @@ -102,10 +102,10 @@ static struct linux_binfmt flat_format = { * Currently only a stub-function. */ -static int flat_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit) +static int flat_core_dump(struct coredump_params *cprm) { printk("Process %s:%d received signr %d and should have core dumped\n", - current->comm, current->pid, (int) signr); + current->comm, current->pid, (int) cprm->signr); return(1); } diff --git a/fs/binfmt_som.c b/fs/binfmt_som.c index eff74b9c9e77..2a9b5330cc5e 100644 --- a/fs/binfmt_som.c +++ b/fs/binfmt_som.c @@ -43,7 +43,7 @@ static int load_som_library(struct file *); * don't even try. */ #if 0 -static int som_core_dump(long signr, struct pt_regs *regs, unsigned long limit); +static int som_core_dump(struct coredump_params *cprm); #else #define som_core_dump NULL #endif diff --git a/fs/exec.c b/fs/exec.c index 77db9a97a773..632b02e34ec7 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1763,17 +1763,20 @@ void do_coredump(long signr, int exit_code, struct pt_regs *regs) struct mm_struct *mm = current->mm; struct linux_binfmt * binfmt; struct inode * inode; - struct file * file; const struct cred *old_cred; struct cred *cred; int retval = 0; int flag = 0; int ispipe = 0; - unsigned long core_limit = current->signal->rlim[RLIMIT_CORE].rlim_cur; char **helper_argv = NULL; int helper_argc = 0; int dump_count = 0; static atomic_t core_dump_count = ATOMIC_INIT(0); + struct coredump_params cprm = { + .signr = signr, + .regs = regs, + .limit = current->signal->rlim[RLIMIT_CORE].rlim_cur, + }; audit_core_dumps(signr); @@ -1829,15 +1832,15 @@ void do_coredump(long signr, int exit_code, struct pt_regs *regs) ispipe = format_corename(corename, signr); unlock_kernel(); - if ((!ispipe) && (core_limit < binfmt->min_coredump)) + if ((!ispipe) && (cprm.limit < binfmt->min_coredump)) goto fail_unlock; if (ispipe) { - if (core_limit == 0) { + if (cprm.limit == 0) { /* * Normally core limits are irrelevant to pipes, since * we're not writing to the file system, but we use - * core_limit of 0 here as a speacial value. Any + * cprm.limit of 0 here as a speacial value. Any * non-zero limit gets set to RLIM_INFINITY below, but * a limit of 0 skips the dump. This is a consistent * way to catch recursive crashes. We can still crash @@ -1870,25 +1873,25 @@ void do_coredump(long signr, int exit_code, struct pt_regs *regs) goto fail_dropcount; } - core_limit = RLIM_INFINITY; + cprm.limit = RLIM_INFINITY; /* SIGPIPE can happen, but it's just never processed */ if (call_usermodehelper_pipe(helper_argv[0], helper_argv, NULL, - &file)) { + &cprm.file)) { printk(KERN_INFO "Core dump to %s pipe failed\n", corename); goto fail_dropcount; } } else - file = filp_open(corename, + cprm.file = filp_open(corename, O_CREAT | 2 | O_NOFOLLOW | O_LARGEFILE | flag, 0600); - if (IS_ERR(file)) + if (IS_ERR(cprm.file)) goto fail_dropcount; - inode = file->f_path.dentry->d_inode; + inode = cprm.file->f_path.dentry->d_inode; if (inode->i_nlink > 1) goto close_fail; /* multiple links - don't dump */ - if (!ispipe && d_unhashed(file->f_path.dentry)) + if (!ispipe && d_unhashed(cprm.file->f_path.dentry)) goto close_fail; /* AK: actually i see no reason to not allow this for named pipes etc., @@ -1901,21 +1904,22 @@ void do_coredump(long signr, int exit_code, struct pt_regs *regs) */ if (inode->i_uid != current_fsuid()) goto close_fail; - if (!file->f_op) + if (!cprm.file->f_op) goto close_fail; - if (!file->f_op->write) + if (!cprm.file->f_op->write) goto close_fail; - if (!ispipe && do_truncate(file->f_path.dentry, 0, 0, file) != 0) + if (!ispipe && + do_truncate(cprm.file->f_path.dentry, 0, 0, cprm.file) != 0) goto close_fail; - retval = binfmt->core_dump(signr, regs, file, core_limit); + retval = binfmt->core_dump(&cprm); if (retval) current->signal->group_exit_code |= 0x80; close_fail: if (ispipe && core_pipe_limit) - wait_for_dump_helpers(file); - filp_close(file, NULL); + wait_for_dump_helpers(cprm.file); + filp_close(cprm.file, NULL); fail_dropcount: if (dump_count) atomic_dec(&core_dump_count); diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index aece486ac734..cd4349bdc34e 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -68,6 +68,14 @@ struct linux_binprm{ #define BINPRM_MAX_RECURSION 4 +/* Function parameter for binfmt->coredump */ +struct coredump_params { + long signr; + struct pt_regs *regs; + struct file *file; + unsigned long limit; +}; + /* * This structure defines the functions that are used to load the binary formats that * linux accepts. @@ -77,7 +85,7 @@ struct linux_binfmt { struct module *module; int (*load_binary)(struct linux_binprm *, struct pt_regs * regs); int (*load_shlib)(struct file *); - int (*core_dump)(long signr, struct pt_regs *regs, struct file *file, unsigned long limit); + int (*core_dump)(struct coredump_params *cprm); unsigned long min_coredump; /* minimal dump size */ int hasvdso; }; -- GitLab From 3d10a1ba0d37c8f5fd5afcdda00613fbb8a90bf5 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 17 Dec 2009 15:27:17 -0800 Subject: [PATCH 388/618] sdio: fix reference counting in sdio_remove_func() sdio_remove_func() needs to be more careful about reference counting. It can be called in error paths where sdio_add_func() has never been called e.g. mmc_attach_sdio error path --> mmc_sdio_remove --> sdio_remove_func Signed-off-by: Daniel Drake Reviewed-by: Matt Fleming Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/core/sdio_bus.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index d37464e296a5..9e060c87e64d 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -248,12 +248,15 @@ int sdio_add_func(struct sdio_func *func) /* * Unregister a SDIO function with the driver model, and * (eventually) free it. + * This function can be called through error paths where sdio_add_func() was + * never executed (because a failure occurred at an earlier point). */ void sdio_remove_func(struct sdio_func *func) { - if (sdio_func_present(func)) - device_del(&func->dev); + if (!sdio_func_present(func)) + return; + device_del(&func->dev); put_device(&func->dev); } -- GitLab From e8812793637b4f23f01eb46db86b5dad1fc97f2a Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Thu, 17 Dec 2009 15:27:18 -0800 Subject: [PATCH 389/618] sdio: initialise SDIO functions and update card->sdio_funcs in lockstep Daniel Drake noticed a crash in the error path of mmc_attach_sdio(). This bug is discussed at http://dev.laptop.org/ticket/9707. BUG: unable to handle kernel paging request at 6b6b6c57 IP: [] sdio_remove_func+0x9/0x27 Call Trace: [] ? mmc_sdio_remove+0x34/0x65 [] ? mmc_attach_sdio+0x217/0x240 [] ? mmc_rescan+0x1a2/0x20f [] ? worker_thread+0x156/0x1e We need to accurately track how many SDIO functions have been initialised (and keep card->sdio_funcs in sync) so that we don't try to remove more functions than we initialised if we hit the error path in mmc_attach_sdio(). Without this patch if we hit the error path in mmc_attach_sdio() we run the risk of deferencing invalid memory in sdio_remove_func(), leading to a crash. Signed-off-by: Matt Fleming Cc: Daniel Drake Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/core/sdio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index cdb845b68ab5..06b64085a355 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -516,7 +516,8 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) * The number of functions on the card is encoded inside * the ocr. */ - card->sdio_funcs = funcs = (ocr & 0x70000000) >> 28; + funcs = (ocr & 0x70000000) >> 28; + card->sdio_funcs = 0; /* * If needed, disconnect card detection pull-up resistor. @@ -528,7 +529,7 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) /* * Initialize (but don't add) all present functions. */ - for (i = 0;i < funcs;i++) { + for (i = 0; i < funcs; i++, card->sdio_funcs++) { err = sdio_init_func(host->card, i + 1); if (err) goto remove; -- GitLab From c0bba0d25ee13f4be4598730057a25758014d7f1 Mon Sep 17 00:00:00 2001 From: Albert Herranz Date: Thu, 17 Dec 2009 15:27:19 -0800 Subject: [PATCH 390/618] sdhci: protect header file against multi inclusion Signed-off-by: Albert Herranz Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/sdhci.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index ce5f1d73dc04..842f46f94284 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -8,6 +8,8 @@ * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ +#ifndef __SDHCI_H +#define __SDHCI_H #include #include @@ -408,3 +410,5 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead); extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state); extern int sdhci_resume_host(struct sdhci_host *host); #endif + +#endif /* __SDHCI_H */ -- GitLab From bc1ad567b16031a82b90e4ef86c1e7541957781f Mon Sep 17 00:00:00 2001 From: Albert Herranz Date: Thu, 17 Dec 2009 15:27:19 -0800 Subject: [PATCH 391/618] sdhci-of: rename main driver file prior to reorganization This patch renames sdhci-of.c to sdhci-of-core.c before reorganizing the driver to support additional hardware. The driver is still built as sdhci-of despite the rename of the file. No functional change. Signed-off-by: Albert Herranz Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/Makefile | 4 +++- drivers/mmc/host/{sdhci-of.c => sdhci-of-core.c} | 0 2 files changed, 3 insertions(+), 1 deletion(-) rename drivers/mmc/host/{sdhci-of.c => sdhci-of-core.c} (100%) diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index ded4d8cdd9d7..1efaaa4f45ad 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_MMC_MXC) += mxcmmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o -obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o obj-$(CONFIG_MMC_WBSD) += wbsd.o @@ -37,6 +36,9 @@ obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o +obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o +sdhci-of-y := sdhci-of-core.o + ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG endif diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of-core.c similarity index 100% rename from drivers/mmc/host/sdhci-of.c rename to drivers/mmc/host/sdhci-of-core.c -- GitLab From 7657c3a7d4bd42b832af5d6bb0e0e9bdba82d44d Mon Sep 17 00:00:00 2001 From: Albert Herranz Date: Thu, 17 Dec 2009 15:27:20 -0800 Subject: [PATCH 392/618] sdhci-of: reorganize driver to support additional hardware This patch breaks down sdhci-of into a core portion and a eSDHC portion, clearing the path to easily support additional hardware using the same OF driver. Signed-off-by: Albert Herranz Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/Kconfig | 26 +++++- drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-of-core.c | 140 ++++------------------------- drivers/mmc/host/sdhci-of-esdhc.c | 143 ++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-of.h | 41 +++++++++ 5 files changed, 224 insertions(+), 127 deletions(-) create mode 100644 drivers/mmc/host/sdhci-of-esdhc.c create mode 100644 drivers/mmc/host/sdhci-of.h diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 9d405b181781..d9234648199a 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -44,6 +44,19 @@ config MMC_SDHCI_IO_ACCESSORS This is silent Kconfig symbol that is selected by the drivers that need to overwrite SDHCI IO memory accessors. +config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER + bool + select MMC_SDHCI_IO_ACCESSORS + help + This option is selected by drivers running on big endian hosts + and performing I/O to a SDHCI controller through a bus that + implements a hardware byte swapper using a 32-bit datum. + This endian mapping mode is called "data invariance" and + has the effect of scrambling the addresses and formats of data + accessed in sizes other than the datum size. + + This is the case for the Freescale eSDHC. + config MMC_SDHCI_PCI tristate "SDHCI support on PCI bus" depends on MMC_SDHCI && PCI @@ -75,11 +88,18 @@ config MMC_RICOH_MMC config MMC_SDHCI_OF tristate "SDHCI support on OpenFirmware platforms" depends on MMC_SDHCI && PPC_OF - select MMC_SDHCI_IO_ACCESSORS help This selects the OF support for Secure Digital Host Controller - Interfaces. So far, only the Freescale eSDHC controller is known - to exist on OF platforms. + Interfaces. + + If unsure, say N. + +config MMC_SDHCI_OF_ESDHC + bool "SDHCI OF support for the Freescale eSDHC controller" + depends on MMC_SDHCI_OF + select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER + help + This selects the Freescale eSDHC controller support. If unsure, say N. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 1efaaa4f45ad..cbda9b2b912b 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o sdhci-of-y := sdhci-of-core.o +sdhci-of-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG diff --git a/drivers/mmc/host/sdhci-of-core.c b/drivers/mmc/host/sdhci-of-core.c index 01ab916c2802..add2008d890d 100644 --- a/drivers/mmc/host/sdhci-of-core.c +++ b/drivers/mmc/host/sdhci-of-core.c @@ -22,62 +22,37 @@ #include #include #include +#include "sdhci-of.h" #include "sdhci.h" -struct sdhci_of_data { - unsigned int quirks; - struct sdhci_ops ops; -}; - -struct sdhci_of_host { - unsigned int clock; - u16 xfer_mode_shadow; -}; +#ifdef CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER /* - * Ops and quirks for the Freescale eSDHC controller. + * These accessors are designed for big endian hosts doing I/O to + * little endian controllers incorporating a 32-bit hardware byte swapper. */ -#define ESDHC_DMA_SYSCTL 0x40c -#define ESDHC_DMA_SNOOP 0x00000040 - -#define ESDHC_SYSTEM_CONTROL 0x2c -#define ESDHC_CLOCK_MASK 0x0000fff0 -#define ESDHC_PREDIV_SHIFT 8 -#define ESDHC_DIVIDER_SHIFT 4 -#define ESDHC_CLOCK_PEREN 0x00000004 -#define ESDHC_CLOCK_HCKEN 0x00000002 -#define ESDHC_CLOCK_IPGEN 0x00000001 - -#define ESDHC_HOST_CONTROL_RES 0x05 - -static u32 esdhc_readl(struct sdhci_host *host, int reg) +u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg) { return in_be32(host->ioaddr + reg); } -static u16 esdhc_readw(struct sdhci_host *host, int reg) +u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg) { - u16 ret; - - if (unlikely(reg == SDHCI_HOST_VERSION)) - ret = in_be16(host->ioaddr + reg); - else - ret = in_be16(host->ioaddr + (reg ^ 0x2)); - return ret; + return in_be16(host->ioaddr + (reg ^ 0x2)); } -static u8 esdhc_readb(struct sdhci_host *host, int reg) +u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg) { return in_8(host->ioaddr + (reg ^ 0x3)); } -static void esdhc_writel(struct sdhci_host *host, u32 val, int reg) +void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg) { out_be32(host->ioaddr + reg, val); } -static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) +void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg) { struct sdhci_of_host *of_host = sdhci_priv(host); int base = reg & ~0x3; @@ -92,106 +67,21 @@ static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) of_host->xfer_mode_shadow = val; return; case SDHCI_COMMAND: - esdhc_writel(host, val << 16 | of_host->xfer_mode_shadow, - SDHCI_TRANSFER_MODE); + sdhci_be32bs_writel(host, val << 16 | of_host->xfer_mode_shadow, + SDHCI_TRANSFER_MODE); return; - case SDHCI_BLOCK_SIZE: - /* - * Two last DMA bits are reserved, and first one is used for - * non-standard blksz of 4096 bytes that we don't support - * yet. So clear the DMA boundary bits. - */ - val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); - /* fall through */ } clrsetbits_be32(host->ioaddr + base, 0xffff << shift, val << shift); } -static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg) +void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg) { int base = reg & ~0x3; int shift = (reg & 0x3) * 8; - /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */ - if (reg == SDHCI_HOST_CONTROL) - val &= ~ESDHC_HOST_CONTROL_RES; - clrsetbits_be32(host->ioaddr + base , 0xff << shift, val << shift); } - -static void esdhc_set_clock(struct sdhci_host *host, unsigned int clock) -{ - int pre_div = 2; - int div = 1; - - clrbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN | - ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK); - - if (clock == 0) - goto out; - - while (host->max_clk / pre_div / 16 > clock && pre_div < 256) - pre_div *= 2; - - while (host->max_clk / pre_div / div > clock && div < 16) - div++; - - dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", - clock, host->max_clk / pre_div / div); - - pre_div >>= 1; - div--; - - setbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN | - ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | - div << ESDHC_DIVIDER_SHIFT | pre_div << ESDHC_PREDIV_SHIFT); - mdelay(100); -out: - host->clock = clock; -} - -static int esdhc_enable_dma(struct sdhci_host *host) -{ - setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP); - return 0; -} - -static unsigned int esdhc_get_max_clock(struct sdhci_host *host) -{ - struct sdhci_of_host *of_host = sdhci_priv(host); - - return of_host->clock; -} - -static unsigned int esdhc_get_min_clock(struct sdhci_host *host) -{ - struct sdhci_of_host *of_host = sdhci_priv(host); - - return of_host->clock / 256 / 16; -} - -static struct sdhci_of_data sdhci_esdhc = { - .quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 | - SDHCI_QUIRK_BROKEN_CARD_DETECTION | - SDHCI_QUIRK_NO_BUSY_IRQ | - SDHCI_QUIRK_NONSTANDARD_CLOCK | - SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | - SDHCI_QUIRK_PIO_NEEDS_DELAY | - SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET | - SDHCI_QUIRK_NO_CARD_NO_RESET, - .ops = { - .readl = esdhc_readl, - .readw = esdhc_readw, - .readb = esdhc_readb, - .writel = esdhc_writel, - .writew = esdhc_writew, - .writeb = esdhc_writeb, - .set_clock = esdhc_set_clock, - .enable_dma = esdhc_enable_dma, - .get_max_clock = esdhc_get_max_clock, - .get_min_clock = esdhc_get_min_clock, - }, -}; +#endif /* CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER */ #ifdef CONFIG_PM @@ -301,9 +191,11 @@ static int __devexit sdhci_of_remove(struct of_device *ofdev) } static const struct of_device_id sdhci_of_match[] = { +#ifdef CONFIG_MMC_SDHCI_OF_ESDHC { .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, }, { .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, }, { .compatible = "fsl,esdhc", .data = &sdhci_esdhc, }, +#endif { .compatible = "generic-sdhci", }, {}, }; diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c new file mode 100644 index 000000000000..d5b11a17e648 --- /dev/null +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -0,0 +1,143 @@ +/* + * Freescale eSDHC controller driver. + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2009 MontaVista Software, Inc. + * + * Authors: Xiaobo Xie + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include +#include +#include +#include "sdhci-of.h" +#include "sdhci.h" + +/* + * Ops and quirks for the Freescale eSDHC controller. + */ + +#define ESDHC_DMA_SYSCTL 0x40c +#define ESDHC_DMA_SNOOP 0x00000040 + +#define ESDHC_SYSTEM_CONTROL 0x2c +#define ESDHC_CLOCK_MASK 0x0000fff0 +#define ESDHC_PREDIV_SHIFT 8 +#define ESDHC_DIVIDER_SHIFT 4 +#define ESDHC_CLOCK_PEREN 0x00000004 +#define ESDHC_CLOCK_HCKEN 0x00000002 +#define ESDHC_CLOCK_IPGEN 0x00000001 + +#define ESDHC_HOST_CONTROL_RES 0x05 + +static u16 esdhc_readw(struct sdhci_host *host, int reg) +{ + u16 ret; + + if (unlikely(reg == SDHCI_HOST_VERSION)) + ret = in_be16(host->ioaddr + reg); + else + ret = sdhci_be32bs_readw(host, reg); + return ret; +} + +static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) +{ + if (reg == SDHCI_BLOCK_SIZE) { + /* + * Two last DMA bits are reserved, and first one is used for + * non-standard blksz of 4096 bytes that we don't support + * yet. So clear the DMA boundary bits. + */ + val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); + } + sdhci_be32bs_writew(host, val, reg); +} + +static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg) +{ + /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */ + if (reg == SDHCI_HOST_CONTROL) + val &= ~ESDHC_HOST_CONTROL_RES; + sdhci_be32bs_writeb(host, val, reg); +} + +static void esdhc_set_clock(struct sdhci_host *host, unsigned int clock) +{ + int pre_div = 2; + int div = 1; + + clrbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN | + ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK); + + if (clock == 0) + goto out; + + while (host->max_clk / pre_div / 16 > clock && pre_div < 256) + pre_div *= 2; + + while (host->max_clk / pre_div / div > clock && div < 16) + div++; + + dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", + clock, host->max_clk / pre_div / div); + + pre_div >>= 1; + div--; + + setbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN | + ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | + div << ESDHC_DIVIDER_SHIFT | pre_div << ESDHC_PREDIV_SHIFT); + mdelay(100); +out: + host->clock = clock; +} + +static int esdhc_enable_dma(struct sdhci_host *host) +{ + setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP); + return 0; +} + +static unsigned int esdhc_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_of_host *of_host = sdhci_priv(host); + + return of_host->clock; +} + +static unsigned int esdhc_get_min_clock(struct sdhci_host *host) +{ + struct sdhci_of_host *of_host = sdhci_priv(host); + + return of_host->clock / 256 / 16; +} + +struct sdhci_of_data sdhci_esdhc = { + .quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 | + SDHCI_QUIRK_BROKEN_CARD_DETECTION | + SDHCI_QUIRK_NO_BUSY_IRQ | + SDHCI_QUIRK_NONSTANDARD_CLOCK | + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | + SDHCI_QUIRK_PIO_NEEDS_DELAY | + SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET | + SDHCI_QUIRK_NO_CARD_NO_RESET, + .ops = { + .readl = sdhci_be32bs_readl, + .readw = esdhc_readw, + .readb = sdhci_be32bs_readb, + .writel = sdhci_be32bs_writel, + .writew = esdhc_writew, + .writeb = esdhc_writeb, + .set_clock = esdhc_set_clock, + .enable_dma = esdhc_enable_dma, + .get_max_clock = esdhc_get_max_clock, + .get_min_clock = esdhc_get_min_clock, + }, +}; diff --git a/drivers/mmc/host/sdhci-of.h b/drivers/mmc/host/sdhci-of.h new file mode 100644 index 000000000000..17e873d3baaf --- /dev/null +++ b/drivers/mmc/host/sdhci-of.h @@ -0,0 +1,41 @@ +/* + * OpenFirmware bindings for Secure Digital Host Controller Interface. + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2009 MontaVista Software, Inc. + * + * Authors: Xiaobo Xie + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#ifndef __SDHCI_OF_H +#define __SDHCI_OF_H + +#include +#include "sdhci.h" + +struct sdhci_of_data { + unsigned int quirks; + struct sdhci_ops ops; +}; + +struct sdhci_of_host { + unsigned int clock; + u16 xfer_mode_shadow; +}; + +extern u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg); +extern u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg); +extern u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg); +extern void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg); +extern void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg); +extern void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg); + +extern struct sdhci_of_data sdhci_esdhc; + +#endif /* __SDHCI_OF_H */ -- GitLab From 1144ab5d4b2da9f964d126105c6b3ced939eb073 Mon Sep 17 00:00:00 2001 From: Albert Herranz Date: Thu, 17 Dec 2009 15:27:20 -0800 Subject: [PATCH 393/618] sdhci-of: add support for the wii sdhci controller Add support for the Secure Digital Host Controller Interface found on the "Hollywood" chipset of the Nintendo Wii video game console. Signed-off-by: Albert Herranz Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/Kconfig | 13 ++++++- drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-of-core.c | 3 ++ drivers/mmc/host/sdhci-of-hlwd.c | 65 ++++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-of.h | 1 + 5 files changed, 82 insertions(+), 1 deletion(-) create mode 100644 drivers/mmc/host/sdhci-of-hlwd.c diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index d9234648199a..ce1d28884e29 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -55,7 +55,7 @@ config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER has the effect of scrambling the addresses and formats of data accessed in sizes other than the datum size. - This is the case for the Freescale eSDHC. + This is the case for the Freescale eSDHC and Nintendo Wii SDHCI. config MMC_SDHCI_PCI tristate "SDHCI support on PCI bus" @@ -103,6 +103,17 @@ config MMC_SDHCI_OF_ESDHC If unsure, say N. +config MMC_SDHCI_OF_HLWD + bool "SDHCI OF support for the Nintendo Wii SDHCI controllers" + depends on MMC_SDHCI_OF + select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER + help + This selects the Secure Digital Host Controller Interface (SDHCI) + found in the "Hollywood" chipset of the Nintendo Wii video game + console. + + If unsure, say N. + config MMC_SDHCI_PLTFM tristate "SDHCI support on the platform specific bus" depends on MMC_SDHCI diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index cbda9b2b912b..3d253dd4240f 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o sdhci-of-y := sdhci-of-core.o sdhci-of-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o +sdhci-of-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG diff --git a/drivers/mmc/host/sdhci-of-core.c b/drivers/mmc/host/sdhci-of-core.c index add2008d890d..55e33135edb4 100644 --- a/drivers/mmc/host/sdhci-of-core.c +++ b/drivers/mmc/host/sdhci-of-core.c @@ -195,6 +195,9 @@ static const struct of_device_id sdhci_of_match[] = { { .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, }, { .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, }, { .compatible = "fsl,esdhc", .data = &sdhci_esdhc, }, +#endif +#ifdef CONFIG_MMC_SDHCI_OF_HLWD + { .compatible = "nintendo,hollywood-sdhci", .data = &sdhci_hlwd, }, #endif { .compatible = "generic-sdhci", }, {}, diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c new file mode 100644 index 000000000000..35117f3ed757 --- /dev/null +++ b/drivers/mmc/host/sdhci-of-hlwd.c @@ -0,0 +1,65 @@ +/* + * drivers/mmc/host/sdhci-of-hlwd.c + * + * Nintendo Wii Secure Digital Host Controller Interface. + * Copyright (C) 2009 The GameCube Linux Team + * Copyright (C) 2009 Albert Herranz + * + * Based on sdhci-of-esdhc.c + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2009 MontaVista Software, Inc. + * + * Authors: Xiaobo Xie + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include +#include +#include "sdhci-of.h" +#include "sdhci.h" + +/* + * Ops and quirks for the Nintendo Wii SDHCI controllers. + */ + +/* + * We need a small delay after each write, or things go horribly wrong. + */ +#define SDHCI_HLWD_WRITE_DELAY 5 /* usecs */ + +static void sdhci_hlwd_writel(struct sdhci_host *host, u32 val, int reg) +{ + sdhci_be32bs_writel(host, val, reg); + udelay(SDHCI_HLWD_WRITE_DELAY); +} + +static void sdhci_hlwd_writew(struct sdhci_host *host, u16 val, int reg) +{ + sdhci_be32bs_writew(host, val, reg); + udelay(SDHCI_HLWD_WRITE_DELAY); +} + +static void sdhci_hlwd_writeb(struct sdhci_host *host, u8 val, int reg) +{ + sdhci_be32bs_writeb(host, val, reg); + udelay(SDHCI_HLWD_WRITE_DELAY); +} + +struct sdhci_of_data sdhci_hlwd = { + .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE, + .ops = { + .readl = sdhci_be32bs_readl, + .readw = sdhci_be32bs_readw, + .readb = sdhci_be32bs_readb, + .writel = sdhci_hlwd_writel, + .writew = sdhci_hlwd_writew, + .writeb = sdhci_hlwd_writeb, + }, +}; diff --git a/drivers/mmc/host/sdhci-of.h b/drivers/mmc/host/sdhci-of.h index 17e873d3baaf..ad09ad9915d8 100644 --- a/drivers/mmc/host/sdhci-of.h +++ b/drivers/mmc/host/sdhci-of.h @@ -37,5 +37,6 @@ extern void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg); extern void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg); extern struct sdhci_of_data sdhci_esdhc; +extern struct sdhci_of_data sdhci_hlwd; #endif /* __SDHCI_OF_H */ -- GitLab From 26b3c01f7debc1bbc3117bc9c9e016ca6f2e41d5 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 17 Dec 2009 15:27:23 -0800 Subject: [PATCH 394/618] rtc: set wakeup capability for I2C and SPI RTC drivers RTC core won't allow wakeup alarms to be set if RTC devices' parent (i.e. i2c_client or spi_device) isn't wakeup capable. For I2C devices there is I2C_CLIENT_WAKE flag exists that we can pass via board info, and if set, I2C core will initialize wakeup capability. For SPI devices there is no such flag at all. I believe that it's not platform code responsibility to allow or disallow wakeups, instead, drivers themselves should set the capability if a device can trigger wakeups. That's what drivers/base/power/sysfs.c says: * It is the responsibility of device drivers to enable (or disable) * wakeup signaling as part of changing device power states, respecting * the policy choices provided through the driver model. I2C and SPI RTC devices send wakeup events via interrupt lines, so we should set the wakeup capability if IRQ is routed. Ideally we should also check irq for wakeup capability before setting device's capability, i.e. if (can_irq_wake(irq)) device_set_wakeup_capable(&client->dev, 1); But there is no can_irq_wake() call exist, and it is not that trivial to implement it for all interrupts controllers and complex/cascaded setups. drivers/base/power/sysfs.c also covers these cases: * Devices may not be able to generate wakeup events from all power * states. Also, the events may be ignored in some configurations; * for example, they might need help from other devices that aren't * active So there is no guarantee that wakeup will actually work, and so I think there is no point in being pedantic wrt checking IRQ wakeup capability. Signed-off-by: Anton Vorontsov Cc: David Brownell Cc: Ben Dooks Cc: Jean Delvare Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds1305.c | 2 ++ drivers/rtc/rtc-ds1307.c | 2 ++ drivers/rtc/rtc-ds1374.c | 2 ++ 3 files changed, 6 insertions(+) diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c index 259db7f3535b..9630e7d3314e 100644 --- a/drivers/rtc/rtc-ds1305.c +++ b/drivers/rtc/rtc-ds1305.c @@ -778,6 +778,8 @@ static int __devinit ds1305_probe(struct spi_device *spi) spi->irq, status); goto fail1; } + + device_set_wakeup_capable(&spi->dev, 1); } /* export NVRAM */ diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index 8a99da6f2f24..c4ec5c158aa1 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -881,6 +881,8 @@ static int __devinit ds1307_probe(struct i2c_client *client, "unable to request IRQ!\n"); goto exit_irq; } + + device_set_wakeup_capable(&client->dev, 1); set_bit(HAS_ALARM, &ds1307->flags); dev_dbg(&client->dev, "got IRQ %d\n", client->irq); } diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index 713f7bf5afb3..5317bbcbc7a0 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -383,6 +383,8 @@ static int ds1374_probe(struct i2c_client *client, dev_err(&client->dev, "unable to request IRQ\n"); goto out_free; } + + device_set_wakeup_capable(&client->dev, 1); } ds1374->rtc = rtc_device_register(client->name, &client->dev, -- GitLab From 65a80b4c61f5b5f6eb0f5669c8fb120893bfb388 Mon Sep 17 00:00:00 2001 From: Hisashi Hifumi Date: Thu, 17 Dec 2009 15:27:26 -0800 Subject: [PATCH 395/618] readahead: add blk_run_backing_dev I added blk_run_backing_dev on page_cache_async_readahead so readahead I/O is unpluged to improve throughput on especially RAID environment. The normal case is, if page N become uptodate at time T(N), then T(N) <= T(N+1) holds. With RAID (and NFS to some degree), there is no strict ordering, the data arrival time depends on runtime status of individual disks, which breaks that formula. So in do_generic_file_read(), just after submitting the async readahead IO request, the current page may well be uptodate, so the page won't be locked, and the block device won't be implicitly unplugged: if (PageReadahead(page)) page_cache_async_readahead() if (!PageUptodate(page)) goto page_not_up_to_date; //... page_not_up_to_date: lock_page_killable(page); Therefore explicit unplugging can help. Following is the test result with dd. #dd if=testdir/testfile of=/dev/null bs=16384 -2.6.30-rc6 1048576+0 records in 1048576+0 records out 17179869184 bytes (17 GB) copied, 224.182 seconds, 76.6 MB/s -2.6.30-rc6-patched 1048576+0 records in 1048576+0 records out 17179869184 bytes (17 GB) copied, 206.465 seconds, 83.2 MB/s (7Disks RAID-0 Array) -2.6.30-rc6 1054976+0 records in 1054976+0 records out 17284726784 bytes (17 GB) copied, 212.233 seconds, 81.4 MB/s -2.6.30-rc6-patched 1054976+0 records out 17284726784 bytes (17 GB) copied, 198.878 seconds, 86.9 MB/s (7Disks RAID-5 Array) The patch was found to improve performance with the SCST scsi target driver. See http://sourceforge.net/mailarchive/forum.php?thread_name=a0272b440906030714g67eabc5k8f847fb1e538cc62%40mail.gmail.com&forum_name=scst-devel [akpm@linux-foundation.org: unbust comment layout] [akpm@linux-foundation.org: "fix" CONFIG_BLOCK=n] Signed-off-by: Hisashi Hifumi Acked-by: Wu Fengguang Cc: Jens Axboe Cc: KOSAKI Motohiro Tested-by: Ronald Cc: Bart Van Assche Cc: Vladislav Bolkhovitin Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/readahead.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/mm/readahead.c b/mm/readahead.c index aa1aa2345235..033bc135a41f 100644 --- a/mm/readahead.c +++ b/mm/readahead.c @@ -547,5 +547,17 @@ page_cache_async_readahead(struct address_space *mapping, /* do read-ahead */ ondemand_readahead(mapping, ra, filp, true, offset, req_size); + +#ifdef CONFIG_BLOCK + /* + * Normally the current page is !uptodate and lock_page() will be + * immediately called to implicitly unplug the device. However this + * is not always true for RAID conifgurations, where data arrives + * not strictly in their submission order. In this case we need to + * explicitly kick off the IO. + */ + if (PageUptodate(page)) + blk_run_backing_dev(mapping->backing_dev_info, NULL); +#endif } EXPORT_SYMBOL_GPL(page_cache_async_readahead); -- GitLab From 6485536bcf499839a54dcda8a8d47ea0bd29b375 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 17 Dec 2009 15:27:27 -0800 Subject: [PATCH 396/618] printk: fix new kernel-doc warnings Fix kernel-doc warnings in printk.c: Warning(kernel/printk.c:1422): No description found for parameter 'dumper' Warning(kernel/printk.c:1422): Excess function parameter 'dump' description in 'kmsg_dump_register' Warning(kernel/printk.c:1451): No description found for parameter 'dumper' Warning(kernel/printk.c:1451): Excess function parameter 'dump' description in 'kmsg_dump_unregister' Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/printk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/printk.c b/kernel/printk.c index 1ded8e7dd19b..17463ca2e229 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1412,7 +1412,7 @@ static LIST_HEAD(dump_list); /** * kmsg_dump_register - register a kernel log dumper. - * @dump: pointer to the kmsg_dumper structure + * @dumper: pointer to the kmsg_dumper structure * * Adds a kernel log dumper to the system. The dump callback in the * structure will be called when the kernel oopses or panics and must be @@ -1442,7 +1442,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_register); /** * kmsg_dump_unregister - unregister a kmsg dumper. - * @dump: pointer to the kmsg_dumper structure + * @dumper: pointer to the kmsg_dumper structure * * Removes a dump device from the system. Returns zero on success and * %-EINVAL otherwise. -- GitLab From 06b5dc646b9479b786d77749936f25910cd82a37 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 17 Dec 2009 15:51:37 -0800 Subject: [PATCH 397/618] Makefile: Unexport LC_ALL instead of clearing it Apparently not all versions of glibc and utilities treat an empty LC_ALL as nonexistent, causing error messages to be garbled. Instead, explicitly unexport it from the environment. Reported-and-tested-by: Masami Hiramatsu Signed-off-by: H. Peter Anvin LKML-Reference: <4B2AC394.4030108@redhat.com> Cc: Michal Marek Cc: Roland Dreier Cc: Sam Ravnborg --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 6e39af1d8bc4..5e92ca58fb6d 100644 --- a/Makefile +++ b/Makefile @@ -17,11 +17,11 @@ NAME = Man-Eating Seals of Antiquity MAKEFLAGS += -rR --no-print-directory # Avoid funny character set dependencies -LC_ALL= +unexport LC_ALL LC_CTYPE=C LC_COLLATE=C LC_NUMERIC=C -export LC_ALL LC_CTYPE LC_COLLATE LC_NUMERIC +export LC_CTYPE LC_COLLATE LC_NUMERIC # We are using a recursive build, so we need to do a little thinking # to get the ordering right. -- GitLab From 875ab0b74e85d6801a49392447d26e0b28688d86 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 18 Dec 2009 01:57:31 +0100 Subject: [PATCH 398/618] PM: Make the initcall_debug style timing for suspend/resume complete Commit f2511774863487e61b56a97da07ebf8dd61d7836 (PM: Add initcall_debug style timing for suspend/resume) introduced basic timing instrumentation, needed for a scritps/bootgraph.pl equivalent or humans, but it missed the fact that bus types and device classes which haven't been switched to using struct dev_pm_ops objects yet need special handling. As a result, the suspend/resume timing information is only available for devices whose bus types or device classes use struct dev_pm_ops objects, so the majority of devices is not covered. Fix this by adding basic suspend/resume timing instrumentation for devices whose bus types and device classes still don't use struct dev_pm_ops objects for power management. To reduce code duplication move the timing code to helper functions. Signed-off-by: Rafael J. Wysocki --- drivers/base/power/main.c | 97 +++++++++++++++++++++++++++++++-------- 1 file changed, 77 insertions(+), 20 deletions(-) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 1a216c114a0f..c448d5972a0b 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -161,6 +161,32 @@ void device_pm_move_last(struct device *dev) list_move_tail(&dev->power.entry, &dpm_list); } +static ktime_t initcall_debug_start(struct device *dev) +{ + ktime_t calltime = ktime_set(0, 0); + + if (initcall_debug) { + pr_info("calling %s+ @ %i\n", + dev_name(dev), task_pid_nr(current)); + calltime = ktime_get(); + } + + return calltime; +} + +static void initcall_debug_report(struct device *dev, ktime_t calltime, + int error) +{ + ktime_t delta, rettime; + + if (initcall_debug) { + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + pr_info("call %s+ returned %d after %Ld usecs\n", dev_name(dev), + error, (unsigned long long)ktime_to_ns(delta) >> 10); + } +} + /** * pm_op - Execute the PM operation appropriate for given PM event. * @dev: Device to handle. @@ -172,13 +198,9 @@ static int pm_op(struct device *dev, pm_message_t state) { int error = 0; - ktime_t calltime, delta, rettime; + ktime_t calltime; - if (initcall_debug) { - pr_info("calling %s+ @ %i\n", - dev_name(dev), task_pid_nr(current)); - calltime = ktime_get(); - } + calltime = initcall_debug_start(dev); switch (state.event) { #ifdef CONFIG_SUSPEND @@ -227,12 +249,7 @@ static int pm_op(struct device *dev, error = -EINVAL; } - if (initcall_debug) { - rettime = ktime_get(); - delta = ktime_sub(rettime, calltime); - pr_info("call %s+ returned %d after %Ld usecs\n", dev_name(dev), - error, (unsigned long long)ktime_to_ns(delta) >> 10); - } + initcall_debug_report(dev, calltime, error); return error; } @@ -309,8 +326,9 @@ static int pm_noirq_op(struct device *dev, if (initcall_debug) { rettime = ktime_get(); delta = ktime_sub(rettime, calltime); - printk("initcall %s_i+ returned %d after %Ld usecs\n", dev_name(dev), - error, (unsigned long long)ktime_to_ns(delta) >> 10); + printk("initcall %s_i+ returned %d after %Ld usecs\n", + dev_name(dev), error, + (unsigned long long)ktime_to_ns(delta) >> 10); } return error; @@ -407,6 +425,26 @@ void dpm_resume_noirq(pm_message_t state) } EXPORT_SYMBOL_GPL(dpm_resume_noirq); +/** + * legacy_resume - Execute a legacy (bus or class) resume callback for device. + * dev: Device to resume. + * cb: Resume callback to execute. + */ +static int legacy_resume(struct device *dev, int (*cb)(struct device *dev)) +{ + int error; + ktime_t calltime; + + calltime = initcall_debug_start(dev); + + error = cb(dev); + suspend_report_result(cb, error); + + initcall_debug_report(dev, calltime, error); + + return error; +} + /** * device_resume - Execute "resume" callbacks for given device. * @dev: Device to handle. @@ -427,7 +465,7 @@ static int device_resume(struct device *dev, pm_message_t state) error = pm_op(dev, dev->bus->pm, state); } else if (dev->bus->resume) { pm_dev_dbg(dev, state, "legacy "); - error = dev->bus->resume(dev); + error = legacy_resume(dev, dev->bus->resume); } if (error) goto End; @@ -448,7 +486,7 @@ static int device_resume(struct device *dev, pm_message_t state) error = pm_op(dev, dev->class->pm, state); } else if (dev->class->resume) { pm_dev_dbg(dev, state, "legacy class "); - error = dev->class->resume(dev); + error = legacy_resume(dev, dev->class->resume); } } End: @@ -647,6 +685,27 @@ int dpm_suspend_noirq(pm_message_t state) } EXPORT_SYMBOL_GPL(dpm_suspend_noirq); +/** + * legacy_suspend - Execute a legacy (bus or class) suspend callback for device. + * dev: Device to suspend. + * cb: Suspend callback to execute. + */ +static int legacy_suspend(struct device *dev, pm_message_t state, + int (*cb)(struct device *dev, pm_message_t state)) +{ + int error; + ktime_t calltime; + + calltime = initcall_debug_start(dev); + + error = cb(dev, state); + suspend_report_result(cb, error); + + initcall_debug_report(dev, calltime, error); + + return error; +} + /** * device_suspend - Execute "suspend" callbacks for given device. * @dev: Device to handle. @@ -664,8 +723,7 @@ static int device_suspend(struct device *dev, pm_message_t state) error = pm_op(dev, dev->class->pm, state); } else if (dev->class->suspend) { pm_dev_dbg(dev, state, "legacy class "); - error = dev->class->suspend(dev, state); - suspend_report_result(dev->class->suspend, error); + error = legacy_suspend(dev, state, dev->class->suspend); } if (error) goto End; @@ -686,8 +744,7 @@ static int device_suspend(struct device *dev, pm_message_t state) error = pm_op(dev, dev->bus->pm, state); } else if (dev->bus->suspend) { pm_dev_dbg(dev, state, "legacy "); - error = dev->bus->suspend(dev, state); - suspend_report_result(dev->bus->suspend, error); + error = legacy_suspend(dev, state, dev->bus->suspend); } } End: -- GitLab From ecf762b2581e12ac761d12a6e4e297c2224aa899 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 18 Dec 2009 01:57:47 +0100 Subject: [PATCH 399/618] PM: Measure device suspend and resume times Measure and print the time of suspending and resuming all devices. Signed-off-by: Rafael J. Wysocki --- drivers/base/power/main.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index c448d5972a0b..8052dafc0ba9 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -372,6 +372,23 @@ static void pm_dev_err(struct device *dev, pm_message_t state, char *info, kobject_name(&dev->kobj), pm_verb(state.event), info, error); } +static void dpm_show_time(ktime_t starttime, pm_message_t state, char *info) +{ + ktime_t calltime; + s64 usecs64; + int usecs; + + calltime = ktime_get(); + usecs64 = ktime_to_ns(ktime_sub(calltime, starttime)); + do_div(usecs64, NSEC_PER_USEC); + usecs = usecs64; + if (usecs == 0) + usecs = 1; + pr_info("PM: %s%s%s of devices complete after %ld.%03ld msecs\n", + info ?: "", info ? " " : "", pm_verb(state.event), + usecs / USEC_PER_MSEC, usecs % USEC_PER_MSEC); +} + /*------------------------- Resume routines -------------------------*/ /** @@ -408,6 +425,7 @@ static int device_resume_noirq(struct device *dev, pm_message_t state) void dpm_resume_noirq(pm_message_t state) { struct device *dev; + ktime_t starttime = ktime_get(); mutex_lock(&dpm_list_mtx); transition_started = false; @@ -421,6 +439,7 @@ void dpm_resume_noirq(pm_message_t state) pm_dev_err(dev, state, " early", error); } mutex_unlock(&dpm_list_mtx); + dpm_show_time(starttime, state, "early"); resume_device_irqs(); } EXPORT_SYMBOL_GPL(dpm_resume_noirq); @@ -506,6 +525,7 @@ static int device_resume(struct device *dev, pm_message_t state) static void dpm_resume(pm_message_t state) { struct list_head list; + ktime_t starttime = ktime_get(); INIT_LIST_HEAD(&list); mutex_lock(&dpm_list_mtx); @@ -534,6 +554,7 @@ static void dpm_resume(pm_message_t state) } list_splice(&list, &dpm_list); mutex_unlock(&dpm_list_mtx); + dpm_show_time(starttime, state, NULL); } /** @@ -666,6 +687,7 @@ static int device_suspend_noirq(struct device *dev, pm_message_t state) int dpm_suspend_noirq(pm_message_t state) { struct device *dev; + ktime_t starttime = ktime_get(); int error = 0; suspend_device_irqs(); @@ -681,6 +703,8 @@ int dpm_suspend_noirq(pm_message_t state) mutex_unlock(&dpm_list_mtx); if (error) dpm_resume_noirq(resume_event(state)); + else + dpm_show_time(starttime, state, "late"); return error; } EXPORT_SYMBOL_GPL(dpm_suspend_noirq); @@ -760,6 +784,7 @@ static int device_suspend(struct device *dev, pm_message_t state) static int dpm_suspend(pm_message_t state) { struct list_head list; + ktime_t starttime = ktime_get(); int error = 0; INIT_LIST_HEAD(&list); @@ -785,6 +810,8 @@ static int dpm_suspend(pm_message_t state) } list_splice(&list, dpm_list.prev); mutex_unlock(&dpm_list_mtx); + if (!error) + dpm_show_time(starttime, state, NULL); return error; } -- GitLab From 55639353a0035052d9ea6cfe4dde0ac7fcbb2c9f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 17 Dec 2009 17:14:40 -0800 Subject: [PATCH 400/618] Linux 2.6.33-rc1 --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 8491b21b5537..0ac5812f3b6d 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 -SUBLEVEL = 32 -EXTRAVERSION = +SUBLEVEL = 33 +EXTRAVERSION = -rc1 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- GitLab From ed8b67040965e4fe695db333d5914e18ea5f146f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 16 Dec 2009 22:17:09 +0000 Subject: [PATCH 401/618] drm: convert drm_ioctl to unlocked_ioctl drm_ioctl is called with the Big Kernel Lock held, which shows up very high in statistics on vfs_ioctl. Moving the lock into the drm_ioctl function itself makes sure we blame the right subsystem and it gets us one step closer to eliminating the locked version of fops->ioctl. Since drm_ioctl does not require the lock itself, we only need to hold it while calling the specific handler. The 32 bit conversion handlers do not interact with any other code, so they don't need the BKL here either and can just call drm_ioctl. As a bonus, this cleans up all the other users of drm_ioctl which now no longer have to find the inode or call lock_kernel. [airlied: squashed the non-driver bits of the second patch in here, this provides the flag for drivers to use to select unlocked ioctls - but doesn't modify any drivers]. Signed-off-by: Arnd Bergmann Cc: David Airlie Cc: dri-devel@lists.sourceforge.net Cc: Frederic Weisbecker Cc: Thomas Gleixner Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_drv.c | 13 +++- drivers/gpu/drm/drm_ioc32.c | 89 +++++++++---------------- drivers/gpu/drm/i810/i810_dma.c | 2 +- drivers/gpu/drm/i810/i810_drv.c | 2 +- drivers/gpu/drm/i830/i830_dma.c | 2 +- drivers/gpu/drm/i830/i830_drv.c | 2 +- drivers/gpu/drm/i915/i915_drv.c | 2 +- drivers/gpu/drm/i915/i915_ioc32.c | 23 +++---- drivers/gpu/drm/mga/mga_drv.c | 2 +- drivers/gpu/drm/mga/mga_ioc32.c | 13 ++-- drivers/gpu/drm/nouveau/nouveau_drv.c | 2 +- drivers/gpu/drm/nouveau/nouveau_ioc32.c | 4 +- drivers/gpu/drm/r128/r128_drv.c | 2 +- drivers/gpu/drm/r128/r128_ioc32.c | 16 ++--- drivers/gpu/drm/radeon/radeon_drv.c | 4 +- drivers/gpu/drm/radeon/radeon_ioc32.c | 38 ++++------- drivers/gpu/drm/savage/savage_drv.c | 2 +- drivers/gpu/drm/sis/sis_drv.c | 2 +- drivers/gpu/drm/tdfx/tdfx_drv.c | 2 +- drivers/gpu/drm/via/via_drv.c | 2 +- include/drm/drmP.h | 5 +- 21 files changed, 89 insertions(+), 140 deletions(-) diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index ff2f1042cb44..766c46875a20 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -434,11 +434,11 @@ static int drm_version(struct drm_device *dev, void *data, * Looks up the ioctl function in the ::ioctls table, checking for root * previleges if so required, and dispatches to the respective function. */ -int drm_ioctl(struct inode *inode, struct file *filp, +long drm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct drm_file *file_priv = filp->private_data; - struct drm_device *dev = file_priv->minor->dev; + struct drm_device *dev; struct drm_ioctl_desc *ioctl; drm_ioctl_t *func; unsigned int nr = DRM_IOCTL_NR(cmd); @@ -446,6 +446,7 @@ int drm_ioctl(struct inode *inode, struct file *filp, char stack_kdata[128]; char *kdata = NULL; + dev = file_priv->minor->dev; atomic_inc(&dev->ioctl_count); atomic_inc(&dev->counts[_DRM_STAT_IOCTLS]); ++file_priv->ioctl_count; @@ -501,7 +502,13 @@ int drm_ioctl(struct inode *inode, struct file *filp, goto err_i1; } } - retcode = func(dev, kdata, file_priv); + if (ioctl->flags & DRM_UNLOCKED) + retcode = func(dev, kdata, file_priv); + else { + lock_kernel(); + retcode = func(dev, kdata, file_priv); + unlock_kernel(); + } if (cmd & IOC_OUT) { if (copy_to_user((void __user *)arg, kdata, diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c index 282d9fdf9f4e..d61d185cf040 100644 --- a/drivers/gpu/drm/drm_ioc32.c +++ b/drivers/gpu/drm/drm_ioc32.c @@ -104,7 +104,7 @@ static int compat_drm_version(struct file *file, unsigned int cmd, &version->desc)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, + err = drm_ioctl(file, DRM_IOCTL_VERSION, (unsigned long)version); if (err) return err; @@ -145,8 +145,7 @@ static int compat_drm_getunique(struct file *file, unsigned int cmd, &u->unique)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_UNIQUE, (unsigned long)u); + err = drm_ioctl(file, DRM_IOCTL_GET_UNIQUE, (unsigned long)u); if (err) return err; @@ -174,8 +173,7 @@ static int compat_drm_setunique(struct file *file, unsigned int cmd, &u->unique)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_SET_UNIQUE, (unsigned long)u); + return drm_ioctl(file, DRM_IOCTL_SET_UNIQUE, (unsigned long)u); } typedef struct drm_map32 { @@ -205,8 +203,7 @@ static int compat_drm_getmap(struct file *file, unsigned int cmd, if (__put_user(idx, &map->offset)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_MAP, (unsigned long)map); + err = drm_ioctl(file, DRM_IOCTL_GET_MAP, (unsigned long)map); if (err) return err; @@ -246,8 +243,7 @@ static int compat_drm_addmap(struct file *file, unsigned int cmd, || __put_user(m32.flags, &map->flags)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_ADD_MAP, (unsigned long)map); + err = drm_ioctl(file, DRM_IOCTL_ADD_MAP, (unsigned long)map); if (err) return err; @@ -284,8 +280,7 @@ static int compat_drm_rmmap(struct file *file, unsigned int cmd, if (__put_user((void *)(unsigned long)handle, &map->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RM_MAP, (unsigned long)map); + return drm_ioctl(file, DRM_IOCTL_RM_MAP, (unsigned long)map); } typedef struct drm_client32 { @@ -314,8 +309,7 @@ static int compat_drm_getclient(struct file *file, unsigned int cmd, if (__put_user(idx, &client->idx)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_CLIENT, (unsigned long)client); + err = drm_ioctl(file, DRM_IOCTL_GET_CLIENT, (unsigned long)client); if (err) return err; @@ -351,8 +345,7 @@ static int compat_drm_getstats(struct file *file, unsigned int cmd, if (!access_ok(VERIFY_WRITE, stats, sizeof(*stats))) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_STATS, (unsigned long)stats); + err = drm_ioctl(file, DRM_IOCTL_GET_STATS, (unsigned long)stats); if (err) return err; @@ -395,8 +388,7 @@ static int compat_drm_addbufs(struct file *file, unsigned int cmd, || __put_user(agp_start, &buf->agp_start)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_ADD_BUFS, (unsigned long)buf); + err = drm_ioctl(file, DRM_IOCTL_ADD_BUFS, (unsigned long)buf); if (err) return err; @@ -427,8 +419,7 @@ static int compat_drm_markbufs(struct file *file, unsigned int cmd, || __put_user(b32.high_mark, &buf->high_mark)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MARK_BUFS, (unsigned long)buf); + return drm_ioctl(file, DRM_IOCTL_MARK_BUFS, (unsigned long)buf); } typedef struct drm_buf_info32 { @@ -469,8 +460,7 @@ static int compat_drm_infobufs(struct file *file, unsigned int cmd, || __put_user(list, &request->list)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_INFO_BUFS, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_INFO_BUFS, (unsigned long)request); if (err) return err; @@ -531,8 +521,7 @@ static int compat_drm_mapbufs(struct file *file, unsigned int cmd, || __put_user(list, &request->list)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MAP_BUFS, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_MAP_BUFS, (unsigned long)request); if (err) return err; @@ -578,8 +567,7 @@ static int compat_drm_freebufs(struct file *file, unsigned int cmd, &request->list)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_FREE_BUFS, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_FREE_BUFS, (unsigned long)request); } typedef struct drm_ctx_priv_map32 { @@ -605,8 +593,7 @@ static int compat_drm_setsareactx(struct file *file, unsigned int cmd, &request->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_SET_SAREA_CTX, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_SET_SAREA_CTX, (unsigned long)request); } static int compat_drm_getsareactx(struct file *file, unsigned int cmd, @@ -628,8 +615,7 @@ static int compat_drm_getsareactx(struct file *file, unsigned int cmd, if (__put_user(ctx_id, &request->ctx_id)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_SAREA_CTX, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_GET_SAREA_CTX, (unsigned long)request); if (err) return err; @@ -664,8 +650,7 @@ static int compat_drm_resctx(struct file *file, unsigned int cmd, &res->contexts)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RES_CTX, (unsigned long)res); + err = drm_ioctl(file, DRM_IOCTL_RES_CTX, (unsigned long)res); if (err) return err; @@ -718,8 +703,7 @@ static int compat_drm_dma(struct file *file, unsigned int cmd, &d->request_sizes)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_DMA, (unsigned long)d); + err = drm_ioctl(file, DRM_IOCTL_DMA, (unsigned long)d); if (err) return err; @@ -751,8 +735,7 @@ static int compat_drm_agp_enable(struct file *file, unsigned int cmd, if (put_user(m32.mode, &mode->mode)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_ENABLE, (unsigned long)mode); + return drm_ioctl(file, DRM_IOCTL_AGP_ENABLE, (unsigned long)mode); } typedef struct drm_agp_info32 { @@ -781,8 +764,7 @@ static int compat_drm_agp_info(struct file *file, unsigned int cmd, if (!access_ok(VERIFY_WRITE, info, sizeof(*info))) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_INFO, (unsigned long)info); + err = drm_ioctl(file, DRM_IOCTL_AGP_INFO, (unsigned long)info); if (err) return err; @@ -827,16 +809,14 @@ static int compat_drm_agp_alloc(struct file *file, unsigned int cmd, || __put_user(req32.type, &request->type)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_ALLOC, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_AGP_ALLOC, (unsigned long)request); if (err) return err; if (__get_user(req32.handle, &request->handle) || __get_user(req32.physical, &request->physical) || copy_to_user(argp, &req32, sizeof(req32))) { - drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_FREE, (unsigned long)request); + drm_ioctl(file, DRM_IOCTL_AGP_FREE, (unsigned long)request); return -EFAULT; } @@ -856,8 +836,7 @@ static int compat_drm_agp_free(struct file *file, unsigned int cmd, || __put_user(handle, &request->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_FREE, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_AGP_FREE, (unsigned long)request); } typedef struct drm_agp_binding32 { @@ -881,8 +860,7 @@ static int compat_drm_agp_bind(struct file *file, unsigned int cmd, || __put_user(req32.offset, &request->offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_BIND, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_AGP_BIND, (unsigned long)request); } static int compat_drm_agp_unbind(struct file *file, unsigned int cmd, @@ -898,8 +876,7 @@ static int compat_drm_agp_unbind(struct file *file, unsigned int cmd, || __put_user(handle, &request->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_UNBIND, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_AGP_UNBIND, (unsigned long)request); } #endif /* __OS_HAS_AGP */ @@ -923,8 +900,7 @@ static int compat_drm_sg_alloc(struct file *file, unsigned int cmd, || __put_user(x, &request->size)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_SG_ALLOC, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_SG_ALLOC, (unsigned long)request); if (err) return err; @@ -950,8 +926,7 @@ static int compat_drm_sg_free(struct file *file, unsigned int cmd, || __put_user(x << PAGE_SHIFT, &request->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_SG_FREE, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_SG_FREE, (unsigned long)request); } #if defined(CONFIG_X86) || defined(CONFIG_IA64) @@ -981,8 +956,7 @@ static int compat_drm_update_draw(struct file *file, unsigned int cmd, __put_user(update32.data, &request->data)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_UPDATE_DRAW, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_UPDATE_DRAW, (unsigned long)request); return err; } #endif @@ -1023,8 +997,7 @@ static int compat_drm_wait_vblank(struct file *file, unsigned int cmd, || __put_user(req32.request.signal, &request->request.signal)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_WAIT_VBLANK, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_WAIT_VBLANK, (unsigned long)request); if (err) return err; @@ -1094,16 +1067,14 @@ long drm_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) * than always failing. */ if (nr >= ARRAY_SIZE(drm_compat_ioctls)) - return drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg); + return drm_ioctl(filp, cmd, arg); fn = drm_compat_ioctls[nr]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c index 7d1d88cdf2dc..de32d22a8c39 100644 --- a/drivers/gpu/drm/i810/i810_dma.c +++ b/drivers/gpu/drm/i810/i810_dma.c @@ -115,7 +115,7 @@ static int i810_mmap_buffers(struct file *filp, struct vm_area_struct *vma) static const struct file_operations i810_buffer_fops = { .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = i810_mmap_buffers, .fasync = drm_fasync, }; diff --git a/drivers/gpu/drm/i810/i810_drv.c b/drivers/gpu/drm/i810/i810_drv.c index fabb9a817966..c1e02752e023 100644 --- a/drivers/gpu/drm/i810/i810_drv.c +++ b/drivers/gpu/drm/i810/i810_drv.c @@ -59,7 +59,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/i830/i830_dma.c b/drivers/gpu/drm/i830/i830_dma.c index 877bf6cb14a4..06bd732e6463 100644 --- a/drivers/gpu/drm/i830/i830_dma.c +++ b/drivers/gpu/drm/i830/i830_dma.c @@ -117,7 +117,7 @@ static int i830_mmap_buffers(struct file *filp, struct vm_area_struct *vma) static const struct file_operations i830_buffer_fops = { .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = i830_mmap_buffers, .fasync = drm_fasync, }; diff --git a/drivers/gpu/drm/i830/i830_drv.c b/drivers/gpu/drm/i830/i830_drv.c index 389597e4a623..44f990bed8f4 100644 --- a/drivers/gpu/drm/i830/i830_drv.c +++ b/drivers/gpu/drm/i830/i830_drv.c @@ -70,7 +70,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 2fa217862058..24286ca168fc 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -329,7 +329,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_gem_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/i915/i915_ioc32.c b/drivers/gpu/drm/i915/i915_ioc32.c index 1fe68a251b75..13b028994b2b 100644 --- a/drivers/gpu/drm/i915/i915_ioc32.c +++ b/drivers/gpu/drm/i915/i915_ioc32.c @@ -66,8 +66,7 @@ static int compat_i915_batchbuffer(struct file *file, unsigned int cmd, &batchbuffer->cliprects)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_BATCHBUFFER, + return drm_ioctl(file, DRM_IOCTL_I915_BATCHBUFFER, (unsigned long)batchbuffer); } @@ -102,8 +101,8 @@ static int compat_i915_cmdbuffer(struct file *file, unsigned int cmd, &cmdbuffer->cliprects)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_CMDBUFFER, (unsigned long)cmdbuffer); + return drm_ioctl(file, DRM_IOCTL_I915_CMDBUFFER, + (unsigned long)cmdbuffer); } typedef struct drm_i915_irq_emit32 { @@ -125,8 +124,8 @@ static int compat_i915_irq_emit(struct file *file, unsigned int cmd, &request->irq_seq)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_IRQ_EMIT, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_I915_IRQ_EMIT, + (unsigned long)request); } typedef struct drm_i915_getparam32 { int param; @@ -149,8 +148,8 @@ static int compat_i915_getparam(struct file *file, unsigned int cmd, &request->value)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_GETPARAM, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_I915_GETPARAM, + (unsigned long)request); } typedef struct drm_i915_mem_alloc32 { @@ -178,8 +177,8 @@ static int compat_i915_alloc(struct file *file, unsigned int cmd, &request->region_offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_ALLOC, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_I915_ALLOC, + (unsigned long)request); } drm_ioctl_compat_t *i915_compat_ioctls[] = { @@ -211,12 +210,10 @@ long i915_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(i915_compat_ioctls)) fn = i915_compat_ioctls[nr - DRM_COMMAND_BASE]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/mga/mga_drv.c b/drivers/gpu/drm/mga/mga_drv.c index 97ee566ef749..ddfe16197b59 100644 --- a/drivers/gpu/drm/mga/mga_drv.c +++ b/drivers/gpu/drm/mga/mga_drv.c @@ -68,7 +68,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/mga/mga_ioc32.c b/drivers/gpu/drm/mga/mga_ioc32.c index 30d00478ddee..c1f877b7bac1 100644 --- a/drivers/gpu/drm/mga/mga_ioc32.c +++ b/drivers/gpu/drm/mga/mga_ioc32.c @@ -100,8 +100,7 @@ static int compat_mga_init(struct file *file, unsigned int cmd, if (err) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MGA_INIT, (unsigned long)init); + return drm_ioctl(file, DRM_IOCTL_MGA_INIT, (unsigned long)init); } typedef struct drm_mga_getparam32 { @@ -125,8 +124,7 @@ static int compat_mga_getparam(struct file *file, unsigned int cmd, &getparam->value)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MGA_GETPARAM, (unsigned long)getparam); + return drm_ioctl(file, DRM_IOCTL_MGA_GETPARAM, (unsigned long)getparam); } typedef struct drm_mga_drm_bootstrap32 { @@ -166,8 +164,7 @@ static int compat_mga_dma_bootstrap(struct file *file, unsigned int cmd, || __put_user(dma_bootstrap32.agp_size, &dma_bootstrap->agp_size)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MGA_DMA_BOOTSTRAP, + err = drm_ioctl(file, DRM_IOCTL_MGA_DMA_BOOTSTRAP, (unsigned long)dma_bootstrap); if (err) return err; @@ -220,12 +217,10 @@ long mga_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(mga_compat_ioctls)) fn = mga_compat_ioctls[nr - DRM_COMMAND_BASE]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index 35249c35118f..3f943c01e995 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -341,7 +341,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = nouveau_ttm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/nouveau/nouveau_ioc32.c b/drivers/gpu/drm/nouveau/nouveau_ioc32.c index a2c30f4611ba..475ba810bba3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_ioc32.c +++ b/drivers/gpu/drm/nouveau/nouveau_ioc32.c @@ -61,12 +61,10 @@ long nouveau_compat_ioctl(struct file *filp, unsigned int cmd, if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(mga_compat_ioctls)) fn = nouveau_compat_ioctls[nr - DRM_COMMAND_BASE]; #endif - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn)(filp, cmd, arg); else - ret = drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/r128/r128_drv.c b/drivers/gpu/drm/r128/r128_drv.c index 601f4c0e5da5..b806fdcc7170 100644 --- a/drivers/gpu/drm/r128/r128_drv.c +++ b/drivers/gpu/drm/r128/r128_drv.c @@ -64,7 +64,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/r128/r128_ioc32.c b/drivers/gpu/drm/r128/r128_ioc32.c index d3cb676eee84..51c99fc4dd38 100644 --- a/drivers/gpu/drm/r128/r128_ioc32.c +++ b/drivers/gpu/drm/r128/r128_ioc32.c @@ -95,8 +95,7 @@ static int compat_r128_init(struct file *file, unsigned int cmd, &init->agp_textures_offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_R128_INIT, (unsigned long)init); + return drm_ioctl(file, DRM_IOCTL_R128_INIT, (unsigned long)init); } typedef struct drm_r128_depth32 { @@ -129,8 +128,7 @@ static int compat_r128_depth(struct file *file, unsigned int cmd, &depth->mask)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_R128_DEPTH, (unsigned long)depth); + return drm_ioctl(file, DRM_IOCTL_R128_DEPTH, (unsigned long)depth); } @@ -153,8 +151,7 @@ static int compat_r128_stipple(struct file *file, unsigned int cmd, &stipple->mask)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_R128_STIPPLE, (unsigned long)stipple); + return drm_ioctl(file, DRM_IOCTL_R128_STIPPLE, (unsigned long)stipple); } typedef struct drm_r128_getparam32 { @@ -178,8 +175,7 @@ static int compat_r128_getparam(struct file *file, unsigned int cmd, &getparam->value)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_R128_GETPARAM, (unsigned long)getparam); + return drm_ioctl(file, DRM_IOCTL_R128_GETPARAM, (unsigned long)getparam); } drm_ioctl_compat_t *r128_compat_ioctls[] = { @@ -210,12 +206,10 @@ long r128_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(r128_compat_ioctls)) fn = r128_compat_ioctls[nr - DRM_COMMAND_BASE]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index dbd56ef82f9c..8ba3de7994d4 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -196,7 +196,7 @@ static struct drm_driver driver_old = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, @@ -284,7 +284,7 @@ static struct drm_driver kms_driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = radeon_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/radeon/radeon_ioc32.c b/drivers/gpu/drm/radeon/radeon_ioc32.c index a1bf11de308a..48b7cea31e08 100644 --- a/drivers/gpu/drm/radeon/radeon_ioc32.c +++ b/drivers/gpu/drm/radeon/radeon_ioc32.c @@ -92,8 +92,7 @@ static int compat_radeon_cp_init(struct file *file, unsigned int cmd, &init->gart_textures_offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_CP_INIT, (unsigned long)init); + return drm_ioctl(file, DRM_IOCTL_RADEON_CP_INIT, (unsigned long)init); } typedef struct drm_radeon_clear32 { @@ -125,8 +124,7 @@ static int compat_radeon_cp_clear(struct file *file, unsigned int cmd, &clr->depth_boxes)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_CLEAR, (unsigned long)clr); + return drm_ioctl(file, DRM_IOCTL_RADEON_CLEAR, (unsigned long)clr); } typedef struct drm_radeon_stipple32 { @@ -149,8 +147,7 @@ static int compat_radeon_cp_stipple(struct file *file, unsigned int cmd, &request->mask)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_STIPPLE, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_STIPPLE, (unsigned long)request); } typedef struct drm_radeon_tex_image32 { @@ -204,8 +201,7 @@ static int compat_radeon_cp_texture(struct file *file, unsigned int cmd, &image->data)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_TEXTURE, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_TEXTURE, (unsigned long)request); } typedef struct drm_radeon_vertex2_32 { @@ -238,8 +234,7 @@ static int compat_radeon_cp_vertex2(struct file *file, unsigned int cmd, &request->prim)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_VERTEX2, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_VERTEX2, (unsigned long)request); } typedef struct drm_radeon_cmd_buffer32 { @@ -268,8 +263,7 @@ static int compat_radeon_cp_cmdbuf(struct file *file, unsigned int cmd, &request->boxes)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_CMDBUF, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_CMDBUF, (unsigned long)request); } typedef struct drm_radeon_getparam32 { @@ -293,8 +287,7 @@ static int compat_radeon_cp_getparam(struct file *file, unsigned int cmd, &request->value)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_GETPARAM, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_GETPARAM, (unsigned long)request); } typedef struct drm_radeon_mem_alloc32 { @@ -322,8 +315,7 @@ static int compat_radeon_mem_alloc(struct file *file, unsigned int cmd, &request->region_offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_ALLOC, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_ALLOC, (unsigned long)request); } typedef struct drm_radeon_irq_emit32 { @@ -345,8 +337,7 @@ static int compat_radeon_irq_emit(struct file *file, unsigned int cmd, &request->irq_seq)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_IRQ_EMIT, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_IRQ_EMIT, (unsigned long)request); } /* The two 64-bit arches where alignof(u64)==4 in 32-bit code */ @@ -372,8 +363,7 @@ static int compat_radeon_cp_setparam(struct file *file, unsigned int cmd, &request->value)) return -EFAULT; - return drm_ioctl(file->f_dentry->d_inode, file, - DRM_IOCTL_RADEON_SETPARAM, (unsigned long) request); + return drm_ioctl(file, DRM_IOCTL_RADEON_SETPARAM, (unsigned long) request); } #else #define compat_radeon_cp_setparam NULL @@ -413,12 +403,10 @@ long radeon_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(radeon_compat_ioctls)) fn = radeon_compat_ioctls[nr - DRM_COMMAND_BASE]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } @@ -431,9 +419,7 @@ long radeon_kms_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long if (nr < DRM_COMMAND_BASE) return drm_compat_ioctl(filp, cmd, arg); - lock_kernel(); /* XXX for now */ - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/savage/savage_drv.c b/drivers/gpu/drm/savage/savage_drv.c index eee52aa92a7c..021de44c15ab 100644 --- a/drivers/gpu/drm/savage/savage_drv.c +++ b/drivers/gpu/drm/savage/savage_drv.c @@ -50,7 +50,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/sis/sis_drv.c b/drivers/gpu/drm/sis/sis_drv.c index e725cc0b1155..4fd1f067d380 100644 --- a/drivers/gpu/drm/sis/sis_drv.c +++ b/drivers/gpu/drm/sis/sis_drv.c @@ -80,7 +80,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/tdfx/tdfx_drv.c b/drivers/gpu/drm/tdfx/tdfx_drv.c index 012ff2e356b2..ec5a43e65722 100644 --- a/drivers/gpu/drm/tdfx/tdfx_drv.c +++ b/drivers/gpu/drm/tdfx/tdfx_drv.c @@ -48,7 +48,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/via/via_drv.c b/drivers/gpu/drm/via/via_drv.c index bc2f51843005..7a1b210401e0 100644 --- a/drivers/gpu/drm/via/via_drv.c +++ b/drivers/gpu/drm/via/via_drv.c @@ -58,7 +58,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 19ef8ebdc662..71dafb69cfeb 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -296,6 +296,7 @@ typedef int drm_ioctl_compat_t(struct file *filp, unsigned int cmd, #define DRM_MASTER 0x2 #define DRM_ROOT_ONLY 0x4 #define DRM_CONTROL_ALLOW 0x8 +#define DRM_UNLOCKED 0x10 struct drm_ioctl_desc { unsigned int cmd; @@ -1128,8 +1129,8 @@ static inline int drm_mtrr_del(int handle, unsigned long offset, /* Driver support (drm_drv.h) */ extern int drm_init(struct drm_driver *driver); extern void drm_exit(struct drm_driver *driver); -extern int drm_ioctl(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); +extern long drm_ioctl(struct file *filp, + unsigned int cmd, unsigned long arg); extern long drm_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); extern int drm_lastclose(struct drm_device *dev); -- GitLab From 925cc71e512a29e2594bcc17dc58d0a0e9c4d524 Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Thu, 17 Dec 2009 14:44:38 +0000 Subject: [PATCH 402/618] mm: Add notifier in pageblock isolation for balloon drivers Memory balloon drivers can allocate a large amount of memory which is not movable but could be freed to accomodate memory hotplug remove. Prior to calling the memory hotplug notifier chain the memory in the pageblock is isolated. Currently, if the migrate type is not MIGRATE_MOVABLE the isolation will not proceed, causing the memory removal for that page range to fail. Rather than failing pageblock isolation if the migrateteype is not MIGRATE_MOVABLE, this patch checks if all of the pages in the pageblock, and not on the LRU, are owned by a registered balloon driver (or other entity) using a notifier chain. If all of the non-movable pages are owned by a balloon, they can be freed later through the memory notifier chain and the range can still be isolated in set_migratetype_isolate(). Signed-off-by: Robert Jennings Cc: Mel Gorman Cc: Ingo Molnar Cc: Brian King Cc: Paul Mackerras Cc: Martin Schwidefsky Cc: Gerald Schaefer Cc: KAMEZAWA Hiroyuki Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Benjamin Herrenschmidt --- drivers/base/memory.c | 19 ++++++++++++++ include/linux/memory.h | 27 ++++++++++++++++++++ mm/page_alloc.c | 57 ++++++++++++++++++++++++++++++++++++------ 3 files changed, 96 insertions(+), 7 deletions(-) diff --git a/drivers/base/memory.c b/drivers/base/memory.c index c4c8f2e1dd15..d7d77d4a402c 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -63,6 +63,20 @@ void unregister_memory_notifier(struct notifier_block *nb) } EXPORT_SYMBOL(unregister_memory_notifier); +static ATOMIC_NOTIFIER_HEAD(memory_isolate_chain); + +int register_memory_isolate_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&memory_isolate_chain, nb); +} +EXPORT_SYMBOL(register_memory_isolate_notifier); + +void unregister_memory_isolate_notifier(struct notifier_block *nb) +{ + atomic_notifier_chain_unregister(&memory_isolate_chain, nb); +} +EXPORT_SYMBOL(unregister_memory_isolate_notifier); + /* * register_memory - Setup a sysfs device for a memory block */ @@ -157,6 +171,11 @@ int memory_notify(unsigned long val, void *v) return blocking_notifier_call_chain(&memory_chain, val, v); } +int memory_isolate_notify(unsigned long val, void *v) +{ + return atomic_notifier_call_chain(&memory_isolate_chain, val, v); +} + /* * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is * OK to have direct references to sparsemem variables in here. diff --git a/include/linux/memory.h b/include/linux/memory.h index 37fa19b34ef5..1adfe779eb99 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -50,6 +50,19 @@ struct memory_notify { int status_change_nid; }; +/* + * During pageblock isolation, count the number of pages within the + * range [start_pfn, start_pfn + nr_pages) which are owned by code + * in the notifier chain. + */ +#define MEM_ISOLATE_COUNT (1<<0) + +struct memory_isolate_notify { + unsigned long start_pfn; /* Start of range to check */ + unsigned int nr_pages; /* # pages in range to check */ + unsigned int pages_found; /* # pages owned found by callbacks */ +}; + struct notifier_block; struct mem_section; @@ -76,14 +89,28 @@ static inline int memory_notify(unsigned long val, void *v) { return 0; } +static inline int register_memory_isolate_notifier(struct notifier_block *nb) +{ + return 0; +} +static inline void unregister_memory_isolate_notifier(struct notifier_block *nb) +{ +} +static inline int memory_isolate_notify(unsigned long val, void *v) +{ + return 0; +} #else extern int register_memory_notifier(struct notifier_block *nb); extern void unregister_memory_notifier(struct notifier_block *nb); +extern int register_memory_isolate_notifier(struct notifier_block *nb); +extern void unregister_memory_isolate_notifier(struct notifier_block *nb); extern int register_new_memory(int, struct mem_section *); extern int unregister_memory_section(struct mem_section *); extern int memory_dev_init(void); extern int remove_memory_block(unsigned long, struct mem_section *, int); extern int memory_notify(unsigned long val, void *v); +extern int memory_isolate_notify(unsigned long val, void *v); extern struct memory_block *find_memory_block(struct mem_section *); #define CONFIG_MEM_BLOCK_SIZE (PAGES_PER_SECTION< #include #include +#include #include #include @@ -5008,23 +5009,65 @@ void set_pageblock_flags_group(struct page *page, unsigned long flags, int set_migratetype_isolate(struct page *page) { struct zone *zone; - unsigned long flags; + struct page *curr_page; + unsigned long flags, pfn, iter; + unsigned long immobile = 0; + struct memory_isolate_notify arg; + int notifier_ret; int ret = -EBUSY; int zone_idx; zone = page_zone(page); zone_idx = zone_idx(zone); + spin_lock_irqsave(&zone->lock, flags); + if (get_pageblock_migratetype(page) == MIGRATE_MOVABLE || + zone_idx == ZONE_MOVABLE) { + ret = 0; + goto out; + } + + pfn = page_to_pfn(page); + arg.start_pfn = pfn; + arg.nr_pages = pageblock_nr_pages; + arg.pages_found = 0; + /* - * In future, more migrate types will be able to be isolation target. + * It may be possible to isolate a pageblock even if the + * migratetype is not MIGRATE_MOVABLE. The memory isolation + * notifier chain is used by balloon drivers to return the + * number of pages in a range that are held by the balloon + * driver to shrink memory. If all the pages are accounted for + * by balloons, are free, or on the LRU, isolation can continue. + * Later, for example, when memory hotplug notifier runs, these + * pages reported as "can be isolated" should be isolated(freed) + * by the balloon driver through the memory notifier chain. */ - if (get_pageblock_migratetype(page) != MIGRATE_MOVABLE && - zone_idx != ZONE_MOVABLE) + notifier_ret = memory_isolate_notify(MEM_ISOLATE_COUNT, &arg); + notifier_ret = notifier_to_errno(notifier_ret); + if (notifier_ret || !arg.pages_found) goto out; - set_pageblock_migratetype(page, MIGRATE_ISOLATE); - move_freepages_block(zone, page, MIGRATE_ISOLATE); - ret = 0; + + for (iter = pfn; iter < (pfn + pageblock_nr_pages); iter++) { + if (!pfn_valid_within(pfn)) + continue; + + curr_page = pfn_to_page(iter); + if (!page_count(curr_page) || PageLRU(curr_page)) + continue; + + immobile++; + } + + if (arg.pages_found == immobile) + ret = 0; + out: + if (!ret) { + set_pageblock_migratetype(page, MIGRATE_ISOLATE); + move_freepages_block(zone, page, MIGRATE_ISOLATE); + } + spin_unlock_irqrestore(&zone->lock, flags); if (!ret) drain_all_pages(); -- GitLab From 14b8a76b9d53346f2871bf419da2aaf219940c50 Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Thu, 17 Dec 2009 14:44:52 +0000 Subject: [PATCH 403/618] powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings Cc: Mel Gorman Cc: Ingo Molnar Cc: Brian King Cc: Paul Mackerras Cc: Martin Schwidefsky Cc: Gerald Schaefer Cc: KAMEZAWA Hiroyuki Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/cmm.c | 254 ++++++++++++++++++++++++++- 1 file changed, 248 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c index bcdcf0ccc8d7..a277f2e28dbc 100644 --- a/arch/powerpc/platforms/pseries/cmm.c +++ b/arch/powerpc/platforms/pseries/cmm.c @@ -38,19 +38,28 @@ #include #include #include +#include #include "plpar_wrappers.h" #define CMM_DRIVER_VERSION "1.0.0" #define CMM_DEFAULT_DELAY 1 +#define CMM_HOTPLUG_DELAY 5 #define CMM_DEBUG 0 #define CMM_DISABLE 0 #define CMM_OOM_KB 1024 #define CMM_MIN_MEM_MB 256 #define KB2PAGES(_p) ((_p)>>(PAGE_SHIFT-10)) #define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10)) +/* + * The priority level tries to ensure that this notifier is called as + * late as possible to reduce thrashing in the shared memory pool. + */ +#define CMM_MEM_HOTPLUG_PRI 1 +#define CMM_MEM_ISOLATE_PRI 15 static unsigned int delay = CMM_DEFAULT_DELAY; +static unsigned int hotplug_delay = CMM_HOTPLUG_DELAY; static unsigned int oom_kb = CMM_OOM_KB; static unsigned int cmm_debug = CMM_DEBUG; static unsigned int cmm_disabled = CMM_DISABLE; @@ -65,6 +74,10 @@ MODULE_VERSION(CMM_DRIVER_VERSION); module_param_named(delay, delay, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(delay, "Delay (in seconds) between polls to query hypervisor paging requests. " "[Default=" __stringify(CMM_DEFAULT_DELAY) "]"); +module_param_named(hotplug_delay, hotplug_delay, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(delay, "Delay (in seconds) after memory hotplug remove " + "before loaning resumes. " + "[Default=" __stringify(CMM_HOTPLUG_DELAY) "]"); module_param_named(oom_kb, oom_kb, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(oom_kb, "Amount of memory in kb to free on OOM. " "[Default=" __stringify(CMM_OOM_KB) "]"); @@ -92,6 +105,9 @@ static unsigned long oom_freed_pages; static struct cmm_page_array *cmm_page_list; static DEFINE_SPINLOCK(cmm_lock); +static DEFINE_MUTEX(hotplug_mutex); +static int hotplug_occurred; /* protected by the hotplug mutex */ + static struct task_struct *cmm_thread_ptr; /** @@ -110,6 +126,17 @@ static long cmm_alloc_pages(long nr) cmm_dbg("Begin request for %ld pages\n", nr); while (nr) { + /* Exit if a hotplug operation is in progress or occurred */ + if (mutex_trylock(&hotplug_mutex)) { + if (hotplug_occurred) { + mutex_unlock(&hotplug_mutex); + break; + } + mutex_unlock(&hotplug_mutex); + } else { + break; + } + addr = __get_free_page(GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY | __GFP_NOMEMALLOC); if (!addr) @@ -119,8 +146,9 @@ static long cmm_alloc_pages(long nr) if (!pa || pa->index >= CMM_NR_PAGES) { /* Need a new page for the page list. */ spin_unlock(&cmm_lock); - npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN | - __GFP_NORETRY | __GFP_NOMEMALLOC); + npa = (struct cmm_page_array *)__get_free_page( + GFP_NOIO | __GFP_NOWARN | + __GFP_NORETRY | __GFP_NOMEMALLOC); if (!npa) { pr_info("%s: Can not allocate new page list\n", __func__); free_page(addr); @@ -282,9 +310,28 @@ static int cmm_thread(void *dummy) while (1) { timeleft = msleep_interruptible(delay * 1000); - if (kthread_should_stop() || timeleft) { - loaned_pages_target = loaned_pages; + if (kthread_should_stop() || timeleft) break; + + if (mutex_trylock(&hotplug_mutex)) { + if (hotplug_occurred) { + hotplug_occurred = 0; + mutex_unlock(&hotplug_mutex); + cmm_dbg("Hotplug operation has occurred, " + "loaning activity suspended " + "for %d seconds.\n", + hotplug_delay); + timeleft = msleep_interruptible(hotplug_delay * + 1000); + if (kthread_should_stop() || timeleft) + break; + continue; + } + mutex_unlock(&hotplug_mutex); + } else { + cmm_dbg("Hotplug operation in progress, activity " + "suspended\n"); + continue; } cmm_get_mpp(); @@ -413,6 +460,193 @@ static struct notifier_block cmm_reboot_nb = { .notifier_call = cmm_reboot_notifier, }; +/** + * cmm_count_pages - Count the number of pages loaned in a particular range. + * + * @arg: memory_isolate_notify structure with address range and count + * + * Return value: + * 0 on success + **/ +static unsigned long cmm_count_pages(void *arg) +{ + struct memory_isolate_notify *marg = arg; + struct cmm_page_array *pa; + unsigned long start = (unsigned long)pfn_to_kaddr(marg->start_pfn); + unsigned long end = start + (marg->nr_pages << PAGE_SHIFT); + unsigned long idx; + + spin_lock(&cmm_lock); + pa = cmm_page_list; + while (pa) { + if ((unsigned long)pa >= start && (unsigned long)pa < end) + marg->pages_found++; + for (idx = 0; idx < pa->index; idx++) + if (pa->page[idx] >= start && pa->page[idx] < end) + marg->pages_found++; + pa = pa->next; + } + spin_unlock(&cmm_lock); + return 0; +} + +/** + * cmm_memory_isolate_cb - Handle memory isolation notifier calls + * @self: notifier block struct + * @action: action to take + * @arg: struct memory_isolate_notify data for handler + * + * Return value: + * NOTIFY_OK or notifier error based on subfunction return value + **/ +static int cmm_memory_isolate_cb(struct notifier_block *self, + unsigned long action, void *arg) +{ + int ret = 0; + + if (action == MEM_ISOLATE_COUNT) + ret = cmm_count_pages(arg); + + if (ret) + ret = notifier_from_errno(ret); + else + ret = NOTIFY_OK; + + return ret; +} + +static struct notifier_block cmm_mem_isolate_nb = { + .notifier_call = cmm_memory_isolate_cb, + .priority = CMM_MEM_ISOLATE_PRI +}; + +/** + * cmm_mem_going_offline - Unloan pages where memory is to be removed + * @arg: memory_notify structure with page range to be offlined + * + * Return value: + * 0 on success + **/ +static int cmm_mem_going_offline(void *arg) +{ + struct memory_notify *marg = arg; + unsigned long start_page = (unsigned long)pfn_to_kaddr(marg->start_pfn); + unsigned long end_page = start_page + (marg->nr_pages << PAGE_SHIFT); + struct cmm_page_array *pa_curr, *pa_last, *npa; + unsigned long idx; + unsigned long freed = 0; + + cmm_dbg("Memory going offline, searching 0x%lx (%ld pages).\n", + start_page, marg->nr_pages); + spin_lock(&cmm_lock); + + /* Search the page list for pages in the range to be offlined */ + pa_last = pa_curr = cmm_page_list; + while (pa_curr) { + for (idx = (pa_curr->index - 1); (idx + 1) > 0; idx--) { + if ((pa_curr->page[idx] < start_page) || + (pa_curr->page[idx] >= end_page)) + continue; + + plpar_page_set_active(__pa(pa_curr->page[idx])); + free_page(pa_curr->page[idx]); + freed++; + loaned_pages--; + totalram_pages++; + pa_curr->page[idx] = pa_last->page[--pa_last->index]; + if (pa_last->index == 0) { + if (pa_curr == pa_last) + pa_curr = pa_last->next; + pa_last = pa_last->next; + free_page((unsigned long)cmm_page_list); + cmm_page_list = pa_last; + continue; + } + } + pa_curr = pa_curr->next; + } + + /* Search for page list structures in the range to be offlined */ + pa_last = NULL; + pa_curr = cmm_page_list; + while (pa_curr) { + if (((unsigned long)pa_curr >= start_page) && + ((unsigned long)pa_curr < end_page)) { + npa = (struct cmm_page_array *)__get_free_page( + GFP_NOIO | __GFP_NOWARN | + __GFP_NORETRY | __GFP_NOMEMALLOC); + if (!npa) { + spin_unlock(&cmm_lock); + cmm_dbg("Failed to allocate memory for list " + "management. Memory hotplug " + "failed.\n"); + return ENOMEM; + } + memcpy(npa, pa_curr, PAGE_SIZE); + if (pa_curr == cmm_page_list) + cmm_page_list = npa; + if (pa_last) + pa_last->next = npa; + free_page((unsigned long) pa_curr); + freed++; + pa_curr = npa; + } + + pa_last = pa_curr; + pa_curr = pa_curr->next; + } + + spin_unlock(&cmm_lock); + cmm_dbg("Released %ld pages in the search range.\n", freed); + + return 0; +} + +/** + * cmm_memory_cb - Handle memory hotplug notifier calls + * @self: notifier block struct + * @action: action to take + * @arg: struct memory_notify data for handler + * + * Return value: + * NOTIFY_OK or notifier error based on subfunction return value + * + **/ +static int cmm_memory_cb(struct notifier_block *self, + unsigned long action, void *arg) +{ + int ret = 0; + + switch (action) { + case MEM_GOING_OFFLINE: + mutex_lock(&hotplug_mutex); + hotplug_occurred = 1; + ret = cmm_mem_going_offline(arg); + break; + case MEM_OFFLINE: + case MEM_CANCEL_OFFLINE: + mutex_unlock(&hotplug_mutex); + cmm_dbg("Memory offline operation complete.\n"); + break; + case MEM_GOING_ONLINE: + case MEM_ONLINE: + case MEM_CANCEL_ONLINE: + break; + } + + if (ret) + ret = notifier_from_errno(ret); + else + ret = NOTIFY_OK; + + return ret; +} + +static struct notifier_block cmm_mem_nb = { + .notifier_call = cmm_memory_cb, + .priority = CMM_MEM_HOTPLUG_PRI +}; + /** * cmm_init - Module initialization * @@ -435,18 +669,24 @@ static int cmm_init(void) if ((rc = cmm_sysfs_register(&cmm_sysdev))) goto out_reboot_notifier; + if (register_memory_notifier(&cmm_mem_nb) || + register_memory_isolate_notifier(&cmm_mem_isolate_nb)) + goto out_unregister_notifier; + if (cmm_disabled) return rc; cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread"); if (IS_ERR(cmm_thread_ptr)) { rc = PTR_ERR(cmm_thread_ptr); - goto out_unregister_sysfs; + goto out_unregister_notifier; } return rc; -out_unregister_sysfs: +out_unregister_notifier: + unregister_memory_notifier(&cmm_mem_nb); + unregister_memory_isolate_notifier(&cmm_mem_isolate_nb); cmm_unregister_sysfs(&cmm_sysdev); out_reboot_notifier: unregister_reboot_notifier(&cmm_reboot_nb); @@ -467,6 +707,8 @@ static void cmm_exit(void) kthread_stop(cmm_thread_ptr); unregister_oom_notifier(&cmm_oom_nb); unregister_reboot_notifier(&cmm_reboot_nb); + unregister_memory_notifier(&cmm_mem_nb); + unregister_memory_isolate_notifier(&cmm_mem_isolate_nb); cmm_free_pages(loaned_pages); cmm_unregister_sysfs(&cmm_sysdev); } -- GitLab From 5c916a295f27dbc0df4769a53b109666506bd061 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 17 Dec 2009 14:45:05 +0000 Subject: [PATCH 404/618] powerpc/iseries: Convert to proc_fops Signed-off-by: Alexey Dobriyan Cc: Benjamin Herrenschmidt Cc: Michael Ellerman Signed-off-by: Andrew Morton Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/iseries/mf.c | 147 ++++++++++++++++------------ 1 file changed, 83 insertions(+), 64 deletions(-) diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index 0d9343df35bc..6617915bcb1a 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -855,59 +855,58 @@ static int mf_get_boot_rtc(struct rtc_time *tm) } #ifdef CONFIG_PROC_FS - -static int proc_mf_dump_cmdline(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int mf_cmdline_proc_show(struct seq_file *m, void *v) { - int len; - char *p; + char *page, *p; struct vsp_cmd_data vsp_cmd; int rc; dma_addr_t dma_addr; /* The HV appears to return no more than 256 bytes of command line */ - if (off >= 256) - return 0; - if ((off + count) > 256) - count = 256 - off; + page = kmalloc(256, GFP_KERNEL); + if (!page) + return -ENOMEM; - dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE); - if (dma_addr == DMA_ERROR_CODE) + dma_addr = iseries_hv_map(page, 256, DMA_FROM_DEVICE); + if (dma_addr == DMA_ERROR_CODE) { + kfree(page); return -ENOMEM; - memset(page, 0, off + count); + } + memset(page, 0, 256); memset(&vsp_cmd, 0, sizeof(vsp_cmd)); vsp_cmd.cmd = 33; vsp_cmd.sub_data.kern.token = dma_addr; vsp_cmd.sub_data.kern.address_type = HvLpDma_AddressType_TceIndex; - vsp_cmd.sub_data.kern.side = (u64)data; - vsp_cmd.sub_data.kern.length = off + count; + vsp_cmd.sub_data.kern.side = (u64)m->private; + vsp_cmd.sub_data.kern.length = 256; mb(); rc = signal_vsp_instruction(&vsp_cmd); - iseries_hv_unmap(dma_addr, off + count, DMA_FROM_DEVICE); - if (rc) + iseries_hv_unmap(dma_addr, 256, DMA_FROM_DEVICE); + if (rc) { + kfree(page); return rc; - if (vsp_cmd.result_code != 0) + } + if (vsp_cmd.result_code != 0) { + kfree(page); return -ENOMEM; + } p = page; - len = 0; - while (len < (off + count)) { - if ((*p == '\0') || (*p == '\n')) { - if (*p == '\0') - *p = '\n'; - p++; - len++; - *eof = 1; + while (p - page < 256) { + if (*p == '\0' || *p == '\n') { + *p = '\n'; break; } p++; - len++; - } - if (len < off) { - *eof = 1; - len = 0; } - return len; + seq_write(m, page, p - page); + kfree(page); + return 0; +} + +static int mf_cmdline_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mf_cmdline_proc_show, PDE(inode)->data); } #if 0 @@ -962,10 +961,8 @@ static int proc_mf_dump_vmlinux(char *page, char **start, off_t off, } #endif -static int proc_mf_dump_side(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int mf_side_proc_show(struct seq_file *m, void *v) { - int len; char mf_current_side = ' '; struct vsp_cmd_data vsp_cmd; @@ -989,21 +986,17 @@ static int proc_mf_dump_side(char *page, char **start, off_t off, } } - len = sprintf(page, "%c\n", mf_current_side); + seq_printf(m, "%c\n", mf_current_side); + return 0; +} - if (len <= (off + count)) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - return len; +static int mf_side_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mf_side_proc_show, NULL); } -static int proc_mf_change_side(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t mf_side_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { char side; u64 newSide; @@ -1041,6 +1034,15 @@ static int proc_mf_change_side(struct file *file, const char __user *buffer, return count; } +static const struct file_operations mf_side_proc_fops = { + .owner = THIS_MODULE, + .open = mf_side_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = mf_side_proc_write, +}; + #if 0 static void mf_getSrcHistory(char *buffer, int size) { @@ -1087,8 +1089,7 @@ static void mf_getSrcHistory(char *buffer, int size) } #endif -static int proc_mf_dump_src(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int mf_src_proc_show(struct seq_file *m, void *v) { #if 0 int len; @@ -1109,8 +1110,13 @@ static int proc_mf_dump_src(char *page, char **start, off_t off, #endif } -static int proc_mf_change_src(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int mf_src_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mf_src_proc_show, NULL); +} + +static ssize_t mf_src_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { char stkbuf[10]; @@ -1135,9 +1141,19 @@ static int proc_mf_change_src(struct file *file, const char __user *buffer, return count; } -static int proc_mf_change_cmdline(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static const struct file_operations mf_src_proc_fops = { + .owner = THIS_MODULE, + .open = mf_src_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = mf_src_proc_write, +}; + +static ssize_t mf_cmdline_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { + void *data = PDE(file->f_path.dentry->d_inode)->data; struct vsp_cmd_data vsp_cmd; dma_addr_t dma_addr; char *page; @@ -1172,6 +1188,15 @@ static int proc_mf_change_cmdline(struct file *file, const char __user *buffer, return ret; } +static const struct file_operations mf_cmdline_proc_fops = { + .owner = THIS_MODULE, + .open = mf_cmdline_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = mf_cmdline_proc_write, +}; + static ssize_t proc_mf_change_vmlinux(struct file *file, const char __user *buf, size_t count, loff_t *ppos) @@ -1246,12 +1271,10 @@ static int __init mf_proc_init(void) if (!mf) return 1; - ent = create_proc_entry("cmdline", S_IFREG|S_IRUSR|S_IWUSR, mf); + ent = proc_create_data("cmdline", S_IRUSR|S_IWUSR, mf, + &mf_cmdline_proc_fops, (void *)(long)i); if (!ent) return 1; - ent->data = (void *)(long)i; - ent->read_proc = proc_mf_dump_cmdline; - ent->write_proc = proc_mf_change_cmdline; if (i == 3) /* no vmlinux entry for 'D' */ continue; @@ -1263,19 +1286,15 @@ static int __init mf_proc_init(void) return 1; } - ent = create_proc_entry("side", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root); + ent = proc_create("side", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root, + &mf_side_proc_fops); if (!ent) return 1; - ent->data = (void *)0; - ent->read_proc = proc_mf_dump_side; - ent->write_proc = proc_mf_change_side; - ent = create_proc_entry("src", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root); + ent = proc_create("src", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root, + &mf_src_proc_fops); if (!ent) return 1; - ent->data = (void *)0; - ent->read_proc = proc_mf_dump_src; - ent->write_proc = proc_mf_change_src; return 0; } -- GitLab From 29827b02dc5d1eed8a1ff8b34cd1926966a87e89 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 17 Dec 2009 14:45:15 +0000 Subject: [PATCH 405/618] powerpc/85xx: Wrong variable returned on error The wrong variable was returned in the case of an error. Signed-off-by: Roel Kluin Cc: Kumar Gala Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index c5028a2e5a58..21f61b8c445b 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -86,7 +86,7 @@ static int mpc8568_fixup_125_clock(struct phy_device *phydev) scr = phy_read(phydev, MV88E1111_SCR); if (scr < 0) - return err; + return scr; err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008); -- GitLab From 8a55c4ba3ed95f3f73f5ee371e863a1deadaec5f Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 27 Nov 2009 06:33:58 +0000 Subject: [PATCH 406/618] powerpc/pseries: Select XICS and PCI_MSI PSERIES It's possible to set CONFIG_XICS without CONFIG_PCI_MSI. When that happens, the kernel fails to build with arch/powerpc/platforms/built-in.o: In function `.xics_startup': xics.c:(.text+0x12f60): undefined reference to `.unmask_msi_irq' make: *** [.tmp_vmlinux1] Error 1 Furthermore, as noted by Benjamin Herrenschmidt, "CONFIG_XICS should be made invisible and selected by PSERIES." This patch fixes PSERIES to select both options Signed-off-by: Mel Gorman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 27554c807fd5..c667f0f02c34 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -2,6 +2,8 @@ config PPC_PSERIES depends on PPC64 && PPC_BOOK3S bool "IBM pSeries & new (POWER5-based) iSeries" select MPIC + select PCI_MSI + select XICS select PPC_I8259 select PPC_RTAS select PPC_RTAS_DAEMON -- GitLab From c2613c7f80eca4d334b3da18a2059d82b750b628 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 6 Dec 2009 17:45:09 +0000 Subject: [PATCH 407/618] powerpc/defconfigs: Reduce 64bit vmlinux by making acenic and cramfs modules Machines with acenic adapters are rare these days, so we may as well make it a module. Cramfs is also very rarely used so we can make it a module. Together this saves 143kB on a 64bit compile: text data bss dec hex filename 8247176 1729404 1221988 11198568 aae068 vmlinux~ 8134997 1727588 1188836 11051421 a8a19d vmlinux Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/g5_defconfig | 2 +- arch/powerpc/configs/ppc64_defconfig | 4 ++-- arch/powerpc/configs/pseries_defconfig | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index fc905924c022..6a66135533c5 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -757,7 +757,7 @@ CONFIG_SUNGEM=y # CONFIG_B44 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y -CONFIG_ACENIC=y +CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 252401824575..34a6b12c02fa 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -980,7 +980,7 @@ CONFIG_E100=y # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y -CONFIG_ACENIC=y +CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y @@ -1863,7 +1863,7 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y +CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index c568329723b8..6ea82df4bfc7 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -796,7 +796,7 @@ CONFIG_E100=y # CONFIG_NET_POCKET is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y -CONFIG_ACENIC=y +CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y @@ -1494,7 +1494,7 @@ CONFIG_CONFIGFS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y +CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set -- GitLab From 55f2fa147392ffd23cec56cbb3d85ab5b3ebc125 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 6 Dec 2009 17:45:55 +0000 Subject: [PATCH 408/618] powerpc/defconfigs: Disable token ring in powerpc defconfigs Token what? Lets save some space in our powerpc kernels and remove token ring support. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/g5_defconfig | 4 ++-- arch/powerpc/configs/iseries_defconfig | 4 ++-- arch/powerpc/configs/ppc64_defconfig | 4 ++-- arch/powerpc/configs/ppc64e_defconfig | 4 ++-- arch/powerpc/configs/pseries_defconfig | 4 ++-- 5 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 6a66135533c5..826a65d3f002 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -794,8 +794,8 @@ CONFIG_NETDEV_10000=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set -CONFIG_TR=y -CONFIG_IBMOL=y +# CONFIG_TR is not set +# CONFIG_IBMOL is not set # CONFIG_3C359 is not set # CONFIG_TMS380TR is not set diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index f925c555508e..76982c51a4c7 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -714,8 +714,8 @@ CONFIG_NETDEV_10000=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set -CONFIG_TR=y -CONFIG_IBMOL=y +# CONFIG_TR is not set +# CONFIG_IBMOL is not set # CONFIG_3C359 is not set # CONFIG_TMS380TR is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 34a6b12c02fa..4b043f973389 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1023,8 +1023,8 @@ CONFIG_PASEMI_MAC=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set -CONFIG_TR=y -CONFIG_IBMOL=y +# CONFIG_TR is not set +# CONFIG_IBMOL is not set # CONFIG_3C359 is not set # CONFIG_TMS380TR is not set diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig index 18af46036258..8195f1650cbf 100644 --- a/arch/powerpc/configs/ppc64e_defconfig +++ b/arch/powerpc/configs/ppc64e_defconfig @@ -1008,8 +1008,8 @@ CONFIG_IXGB=m # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set -CONFIG_TR=y -CONFIG_IBMOL=y +# CONFIG_TR is not set +# CONFIG_IBMOL is not set # CONFIG_3C359 is not set # CONFIG_TMS380TR is not set CONFIG_WLAN=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 6ea82df4bfc7..e89fccbb4a61 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -834,8 +834,8 @@ CONFIG_S2IO=m # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set -CONFIG_TR=y -CONFIG_IBMOL=y +# CONFIG_TR is not set +# CONFIG_IBMOL is not set # CONFIG_3C359 is not set # CONFIG_TMS380TR is not set -- GitLab From 030bdc3fd0807b6097a937468859f4b4baf1b950 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 6 Dec 2009 17:48:33 +0000 Subject: [PATCH 409/618] powerpc/defconfigs: Set HZ=100 on pseries and ppc64 defconfigs Now we have high res timers there is less of a reason for a high HZ value. Furthermore I think there a few reasons we should reduce HZ to 100: - Timer interrupt overhead. While this overhead is small, there are applications that are very sensitive to jitter (eg some HPC apps). - Issues with the timer wheel code. When coming out of NO_HZ idle we work our way through the timer code one tick at a time. If we have been idle a long time, this adds up - I sometimes see milliseconds of time spent in that loop. Long term we should fix the timer wheel algorithm, but for now if we reduce HZ then we reduce the amount of work the timer code has to do when coming out of idle. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ppc64_defconfig | 6 +++--- arch/powerpc/configs/pseries_defconfig | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 4b043f973389..7b3804a6e363 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -304,11 +304,11 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set -CONFIG_HZ=250 +CONFIG_HZ=100 CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index e89fccbb4a61..ca9ff9aad74a 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -230,11 +230,11 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set -CONFIG_HZ=250 +CONFIG_HZ=100 CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set -- GitLab From 50891457f1001450be61be0861b2b49abdcb5fb9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 8 Dec 2009 21:08:44 +0000 Subject: [PATCH 410/618] powerpc/mm: Fix a WARN_ON() with CONFIG_DEBUG_PAGEALLOC and CONFIG_DEBUG_VM Set need to call __set_pte_at() and not set_pte_at() from __change_page_attr() since the later will perform checks with CONFIG_DEBUG_VM that aren't suitable to the way we override an existing PTE. (More specifically, it doesn't let you write over a present PTE). Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/pgtable_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 177e4038b43c..573b3bd1c45b 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -382,7 +382,7 @@ static int __change_page_attr(struct page *page, pgprot_t prot) return 0; if (!get_pteptr(&init_mm, address, &kpte, &kpmd)) return -EINVAL; - set_pte_at(&init_mm, address, kpte, mk_pte(page, prot)); + __set_pte_at(&init_mm, address, kpte, mk_pte(page, prot), 0); wmb(); #ifdef CONFIG_PPC_STD_MMU flush_hash_pages(0, address, pmd_val(*kpmd), 1); -- GitLab From e9edb232d3b0848457a83a5b697f55264542892f Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Thu, 10 Dec 2009 01:19:37 +0000 Subject: [PATCH 411/618] powerpc/pseries: Don't panic when H_PROD fails during cpu-online. If an online-attempt on a CPU which has been offlined using H_CEDE with an appropriate cede latency hint fails, don't panic. Instead print the error message and let the __cpu_up() code notify the CPU Hotplug framework of the failure, which in turn can notify the other subsystem through CPU_UP_CANCELED. Signed-off-by: Gautham R Shenoy Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/smp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 8868c012268a..b4886635972c 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -144,8 +144,8 @@ static void __devinit smp_pSeries_kick_cpu(int nr) hcpuid = get_hard_smp_processor_id(nr); rc = plpar_hcall_norets(H_PROD, hcpuid); if (rc != H_SUCCESS) - panic("Error: Prod to wake up processor %d Ret= %ld\n", - nr, rc); + printk(KERN_ERR "Error: Prod to wake up processor %d\ + Ret= %ld\n", nr, rc); } } -- GitLab From 3d9b740b2d8d73795d745a46eabd55479ee68dcc Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Thu, 10 Dec 2009 01:19:42 +0000 Subject: [PATCH 412/618] powerpc/pseries: Make declarations of cpu_hotplug_driver_lock() ANSI compatible. And add the __acquires() and __releases() annotations, while at it. Signed-off-by: Gautham R Shenoy Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/dlpar.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index 12df9e8812a9..67b7a10f9fce 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -346,12 +346,14 @@ int dlpar_release_drc(u32 drc_index) static DEFINE_MUTEX(pseries_cpu_hotplug_mutex); -void cpu_hotplug_driver_lock() +void cpu_hotplug_driver_lock(void) +__acquires(pseries_cpu_hotplug_mutex) { mutex_lock(&pseries_cpu_hotplug_mutex); } -void cpu_hotplug_driver_unlock() +void cpu_hotplug_driver_unlock(void) +__releases(pseries_cpu_hotplug_mutex) { mutex_unlock(&pseries_cpu_hotplug_mutex); } -- GitLab From 01ae45bcd48527e90923d4a247259770eb836d2b Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 10 Dec 2009 07:28:19 +0000 Subject: [PATCH 413/618] powerpc: Convert BUG() to use unreachable() Use the new unreachable() macro instead of for(;;); Signed-off-by: David Daney CC: Benjamin Herrenschmidt CC: Paul Mackerras CC: linuxppc-dev@ozlabs.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/bug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h index 64e1fdca233e..2c15212e1700 100644 --- a/arch/powerpc/include/asm/bug.h +++ b/arch/powerpc/include/asm/bug.h @@ -68,7 +68,7 @@ _EMIT_BUG_ENTRY \ : : "i" (__FILE__), "i" (__LINE__), \ "i" (0), "i" (sizeof(struct bug_entry))); \ - for(;;) ; \ + unreachable(); \ } while (0) #define BUG_ON(x) do { \ -- GitLab From 5c3399198791f7f828eb9fd504dbb46eef3cb472 Mon Sep 17 00:00:00 2001 From: "Sachin P. Sant" Date: Sun, 13 Dec 2009 21:15:12 +0000 Subject: [PATCH 414/618] powerpc/mm: Fix hash_utils_64.c compile errors with DEBUG enabled. This time without the funny characters. Fix following build errors generated with DEBUG=1 cc1: warnings being treated as errors arch/powerpc/mm/hash_utils_64.c: In function 'htab_dt_scan_page_sizes': arch/powerpc/mm/hash_utils_64.c:343: error: format '%04x' expects type 'unsigned int', but argument 4 has type 'long unsigned int' arch/powerpc/mm/hash_utils_64.c:343: error: format '%08x' expects type 'unsigned int', but argument 5 has type 'long unsigned int' arch/powerpc/mm/hash_utils_64.c: In function 'htab_initialize': arch/powerpc/mm/hash_utils_64.c:666: error: format '%x' expects type 'unsigned int', but argument 4 has type 'long unsigned int' ... SNIP ... Signed-off-by: Sachin Sant Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/hash_utils_64.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 50f867d657df..c7fa4dac2f47 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -340,7 +340,7 @@ static int __init htab_dt_scan_page_sizes(unsigned long node, else def->tlbiel = 0; - DBG(" %d: shift=%02x, sllp=%04x, avpnm=%08x, " + DBG(" %d: shift=%02x, sllp=%04lx, avpnm=%08lx, " "tlbiel=%d, penc=%d\n", idx, shift, def->sllp, def->avpnm, def->tlbiel, def->penc); @@ -663,7 +663,7 @@ static void __init htab_initialize(void) base = (unsigned long)__va(lmb.memory.region[i].base); size = lmb.memory.region[i].size; - DBG("creating mapping for region: %lx..%lx (prot: %x)\n", + DBG("creating mapping for region: %lx..%lx (prot: %lx)\n", base, size, prot); #ifdef CONFIG_U3_DART @@ -1115,7 +1115,7 @@ void flush_hash_page(unsigned long va, real_pte_t pte, int psize, int ssize, { unsigned long hash, index, shift, hidx, slot; - DBG_LOW("flush_hash_page(va=%016x)\n", va); + DBG_LOW("flush_hash_page(va=%016lx)\n", va); pte_iterate_hashed_subpages(pte, psize, va, index, shift) { hash = hpt_hash(va, shift, ssize); hidx = __rpte_to_hidx(pte, index); @@ -1123,7 +1123,7 @@ void flush_hash_page(unsigned long va, real_pte_t pte, int psize, int ssize, hash = ~hash; slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; slot += hidx & _PTEIDX_GROUP_IX; - DBG_LOW(" sub %d: hash=%x, hidx=%x\n", index, slot, hidx); + DBG_LOW(" sub %ld: hash=%lx, hidx=%lx\n", index, slot, hidx); ppc_md.hpte_invalidate(slot, va, psize, ssize, local); } pte_iterate_hashed_end(); } -- GitLab From f04b10cddb0fbceadbad7af38c31543298948d8f Mon Sep 17 00:00:00 2001 From: Yang Li Date: Mon, 14 Dec 2009 03:01:49 +0000 Subject: [PATCH 415/618] powerpc/mm: Fix typo of cpumask_clear_cpu() The function name of cpumask_clear_cpu was not correct. Fortunately nobody uses that code with hotplug yet :-) Reported-by: Jin Qing Signed-off-by: Li Yang Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mmu_context_nohash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index be4f34c30a0b..1044a634b6d0 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -353,7 +353,7 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self, read_lock(&tasklist_lock); for_each_process(p) { if (p->mm) - cpu_mask_clear_cpu(cpu, mm_cpumask(p->mm)); + cpumask_clear_cpu(cpu, mm_cpumask(p->mm)); } read_unlock(&tasklist_lock); break; -- GitLab From bb7f20b1c639606def3b91f4e4aca6daeee5d80a Mon Sep 17 00:00:00 2001 From: Neil Campbell Date: Mon, 14 Dec 2009 04:08:57 +0000 Subject: [PATCH 416/618] powerpc: Handle VSX alignment faults correctly in little-endian mode This patch fixes the handling of VSX alignment faults in little-endian mode (the current code assumes the processor is in big-endian mode). The patch also makes the handlers clear the top 8 bytes of the register when handling an 8 byte VSX load. This is based on 2.6.32. Signed-off-by: Neil Campbell Cc: Acked-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/align.c | 63 +++++++++++++++++++++++++++---------- 1 file changed, 46 insertions(+), 17 deletions(-) diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index 3839839f83c7..b876e989220b 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -642,10 +642,14 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg, */ static int emulate_vsx(unsigned char __user *addr, unsigned int reg, unsigned int areg, struct pt_regs *regs, - unsigned int flags, unsigned int length) + unsigned int flags, unsigned int length, + unsigned int elsize) { char *ptr; + unsigned long *lptr; int ret = 0; + int sw = 0; + int i, j; flush_vsx_to_thread(current); @@ -654,19 +658,35 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg, else ptr = (char *) ¤t->thread.vr[reg - 32]; - if (flags & ST) - ret = __copy_to_user(addr, ptr, length); - else { - if (flags & SPLT){ - ret = __copy_from_user(ptr, addr, length); - ptr += length; + lptr = (unsigned long *) ptr; + + if (flags & SW) + sw = elsize-1; + + for (j = 0; j < length; j += elsize) { + for (i = 0; i < elsize; ++i) { + if (flags & ST) + ret |= __put_user(ptr[i^sw], addr + i); + else + ret |= __get_user(ptr[i^sw], addr + i); } - ret |= __copy_from_user(ptr, addr, length); + ptr += elsize; + addr += elsize; } - if (flags & U) - regs->gpr[areg] = regs->dar; - if (ret) + + if (!ret) { + if (flags & U) + regs->gpr[areg] = regs->dar; + + /* Splat load copies the same data to top and bottom 8 bytes */ + if (flags & SPLT) + lptr[1] = lptr[0]; + /* For 8 byte loads, zero the top 8 bytes */ + else if (!(flags & ST) && (8 == length)) + lptr[1] = 0; + } else return -EFAULT; + return 1; } #endif @@ -767,16 +787,25 @@ int fix_alignment(struct pt_regs *regs) #ifdef CONFIG_VSX if ((instruction & 0xfc00003e) == 0x7c000018) { - /* Additional register addressing bit (64 VSX vs 32 FPR/GPR */ + unsigned int elsize; + + /* Additional register addressing bit (64 VSX vs 32 FPR/GPR) */ reg |= (instruction & 0x1) << 5; /* Simple inline decoder instead of a table */ + /* VSX has only 8 and 16 byte memory accesses */ + nb = 8; if (instruction & 0x200) nb = 16; - else if (instruction & 0x080) - nb = 8; - else - nb = 4; + + /* Vector stores in little-endian mode swap individual + elements, so process them separately */ + elsize = 4; + if (instruction & 0x80) + elsize = 8; + flags = 0; + if (regs->msr & MSR_LE) + flags |= SW; if (instruction & 0x100) flags |= ST; if (instruction & 0x040) @@ -787,7 +816,7 @@ int fix_alignment(struct pt_regs *regs) nb = 8; } PPC_WARN_ALIGNMENT(vsx, regs); - return emulate_vsx(addr, reg, areg, regs, flags, nb); + return emulate_vsx(addr, reg, areg, regs, flags, nb, elsize); } #endif /* A size of 0 indicates an instruction we don't support, with -- GitLab From 7a96c6b22efbd84e195836e192a3ce478cd6e14c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 14 Dec 2009 15:31:13 +0000 Subject: [PATCH 417/618] powerpc: Fix MSI support on U4 bridge PCIe slot On machines using the Apple U4 bridge (AKA IBM CPC945) PCIe interface such as the latest generation G5 machines x16 slot or the x16 slot of the PowerStation, MSIs are currently broken (and will oops when enabling). This fixes the oops and implements proper support for those. Instead of using the PCIe <-> HT bridge conversion, on such slots we need to use a bunch of magic registers in the bridge as the MSI target, encoding the interrupt number in the low bits of the address itself Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic_msi.c | 11 +++++++- arch/powerpc/sysdev/mpic_u3msi.c | 46 +++++++++++++++++++++++++++----- 2 files changed, 49 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c index 1d44eee80fa1..0f67cd79d481 100644 --- a/arch/powerpc/sysdev/mpic_msi.c +++ b/arch/powerpc/sysdev/mpic_msi.c @@ -39,7 +39,12 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic) pr_debug("mpic: found U3, guessing msi allocator setup\n"); - /* Reserve source numbers we know are reserved in the HW */ + /* Reserve source numbers we know are reserved in the HW. + * + * This is a bit of a mix of U3 and U4 reserves but that's going + * to work fine, we have plenty enugh numbers left so let's just + * mark anything we don't like reserved. + */ for (i = 0; i < 8; i++) msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i); @@ -49,6 +54,10 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic) for (i = 100; i < 105; i++) msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i); + for (i = 124; i < mpic->irq_count; i++) + msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i); + + np = NULL; while ((np = of_find_all_nodes(np))) { pr_debug("mpic: mapping hwirqs for %s\n", np->full_name); diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c index d3caf23e6312..bcbfe79c704b 100644 --- a/arch/powerpc/sysdev/mpic_u3msi.c +++ b/arch/powerpc/sysdev/mpic_u3msi.c @@ -64,12 +64,12 @@ static u64 read_ht_magic_addr(struct pci_dev *pdev, unsigned int pos) return addr; } -static u64 find_ht_magic_addr(struct pci_dev *pdev) +static u64 find_ht_magic_addr(struct pci_dev *pdev, unsigned int hwirq) { struct pci_bus *bus; unsigned int pos; - for (bus = pdev->bus; bus; bus = bus->parent) { + for (bus = pdev->bus; bus && bus->self; bus = bus->parent) { pos = pci_find_ht_capability(bus->self, HT_CAPTYPE_MSI_MAPPING); if (pos) return read_ht_magic_addr(bus->self, pos); @@ -78,13 +78,41 @@ static u64 find_ht_magic_addr(struct pci_dev *pdev) return 0; } +static u64 find_u4_magic_addr(struct pci_dev *pdev, unsigned int hwirq) +{ + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + + /* U4 PCIe MSIs need to write to the special register in + * the bridge that generates interrupts. There should be + * theorically a register at 0xf8005000 where you just write + * the MSI number and that triggers the right interrupt, but + * unfortunately, this is busted in HW, the bridge endian swaps + * the value and hits the wrong nibble in the register. + * + * So instead we use another register set which is used normally + * for converting HT interrupts to MPIC interrupts, which decodes + * the interrupt number as part of the low address bits + * + * This will not work if we ever use more than one legacy MSI in + * a block but we never do. For one MSI or multiple MSI-X where + * each interrupt address can be specified separately, it works + * just fine. + */ + if (of_device_is_compatible(hose->dn, "u4-pcie") || + of_device_is_compatible(hose->dn, "U4-pcie")) + return 0xf8004000 | (hwirq << 4); + + return 0; +} + static int u3msi_msi_check_device(struct pci_dev *pdev, int nvec, int type) { if (type == PCI_CAP_ID_MSIX) pr_debug("u3msi: MSI-X untested, trying anyway.\n"); /* If we can't find a magic address then MSI ain't gonna work */ - if (find_ht_magic_addr(pdev) == 0) { + if (find_ht_magic_addr(pdev, 0) == 0 && + find_u4_magic_addr(pdev, 0) == 0) { pr_debug("u3msi: no magic address found for %s\n", pci_name(pdev)); return -ENXIO; @@ -118,10 +146,6 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) u64 addr; int hwirq; - addr = find_ht_magic_addr(pdev); - msg.address_lo = addr & 0xFFFFFFFF; - msg.address_hi = addr >> 32; - list_for_each_entry(entry, &pdev->msi_list, list) { hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap, 1); if (hwirq < 0) { @@ -129,6 +153,12 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) return hwirq; } + addr = find_ht_magic_addr(pdev, hwirq); + if (addr == 0) + addr = find_u4_magic_addr(pdev, hwirq); + msg.address_lo = addr & 0xFFFFFFFF; + msg.address_hi = addr >> 32; + virq = irq_create_mapping(msi_mpic->irqhost, hwirq); if (virq == NO_IRQ) { pr_debug("u3msi: failed mapping hwirq 0x%x\n", hwirq); @@ -143,6 +173,8 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) pr_debug("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n", virq, hwirq, (unsigned long)addr); + printk("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n", + virq, hwirq, (unsigned long)addr); msg.data = hwirq; write_msi_msg(virq, &msg); -- GitLab From c3a66359398028cd8e5f32611950dc7dc32ea2f2 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Wed, 16 Dec 2009 04:35:57 +0000 Subject: [PATCH 418/618] powerpc/iseries: use DECLARE_COMPLETION_ONSTACK for non-constant completion The _ONSTACK variant should be used for on-stack completion, otherwise it will break lockdep. Signed-off-by: Yong Zhang Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: linuxppc-dev@ozlabs.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/iseries/viopath.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c index 49ff4dc422b7..5aea94f30836 100644 --- a/arch/powerpc/platforms/iseries/viopath.c +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -116,7 +116,7 @@ static int proc_viopath_show(struct seq_file *m, void *v) u16 vlanMap; dma_addr_t handle; HvLpEvent_Rc hvrc; - DECLARE_COMPLETION(done); + DECLARE_COMPLETION_ONSTACK(done); struct device_node *node; const char *sysid; -- GitLab From a1128f8f0ff06ccbea5d6b4a69446b506c57bfbc Mon Sep 17 00:00:00 2001 From: David Gibson Date: Wed, 16 Dec 2009 14:29:56 +0000 Subject: [PATCH 419/618] powerpc/mm: Fix stupid bug in subpge protection handling Commit d28513bc7f675d28b479db666d572e078ecf182d ("Fix bug in pagetable cache cleanup with CONFIG_PPC_SUBPAGE_PROT"), itself a fix for breakage caused by an earlier clean up patch of mine, contains a stupid bug. I changed the parameters of the subpage_protection() function, but failed to update one of the callers. This patch fixes it, and replaces a void * with a typed pointer so that the compiler will warn on such an error in future. Signed-off-by: David Gibson Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/hash_utils_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index c7fa4dac2f47..3ecdcec0a39e 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -879,7 +879,7 @@ static inline int subpage_protection(struct mm_struct *mm, unsigned long ea) */ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) { - void *pgdir; + pgd_t *pgdir; unsigned long vsid; struct mm_struct *mm; pte_t *ptep; @@ -1025,7 +1025,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) else #endif /* CONFIG_PPC_HAS_HASH_64K */ { - int spp = subpage_protection(pgdir, ea); + int spp = subpage_protection(mm, ea); if (access & spp) rc = -2; else -- GitLab From 38e1313fc753482b93aa6c6f11cfbd43a5bcd963 Mon Sep 17 00:00:00 2001 From: Yang Li Date: Wed, 16 Dec 2009 20:18:11 +0000 Subject: [PATCH 420/618] powerpc/mpic: Fix problem that affinity is not updated Since commit 57b150cce8e004ddd36330490a68bfb59b7271e9, desc->affinity of an irq is changed after calling desc->chip->set_affinity. Therefore we need to fix the irq_choose_cpu() not to depend on the desc->affinity for new mask. Signed-off-by: Jiajun Wu Signed-off-by: Li Yang Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index aa9d06e5925b..470dc6c11d57 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -567,13 +567,11 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) #endif /* CONFIG_MPIC_U3_HT_IRQS */ #ifdef CONFIG_SMP -static int irq_choose_cpu(unsigned int virt_irq) +static int irq_choose_cpu(const cpumask_t *mask) { - cpumask_t mask; int cpuid; - cpumask_copy(&mask, irq_to_desc(virt_irq)->affinity); - if (cpus_equal(mask, CPU_MASK_ALL)) { + if (cpumask_equal(mask, cpu_all_mask)) { static int irq_rover; static DEFINE_SPINLOCK(irq_rover_lock); unsigned long flags; @@ -594,20 +592,15 @@ static int irq_choose_cpu(unsigned int virt_irq) spin_unlock_irqrestore(&irq_rover_lock, flags); } else { - cpumask_t tmp; - - cpus_and(tmp, cpu_online_map, mask); - - if (cpus_empty(tmp)) + cpuid = cpumask_first_and(mask, cpu_online_mask); + if (cpuid >= nr_cpu_ids) goto do_round_robin; - - cpuid = first_cpu(tmp); } return get_hard_smp_processor_id(cpuid); } #else -static int irq_choose_cpu(unsigned int virt_irq) +static int irq_choose_cpu(const cpumask_t *mask) { return hard_smp_processor_id(); } @@ -816,7 +809,7 @@ int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask) unsigned int src = mpic_irq_to_hw(irq); if (mpic->flags & MPIC_SINGLE_DEST_CPU) { - int cpuid = irq_choose_cpu(irq); + int cpuid = irq_choose_cpu(cpumask); mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid); } else { -- GitLab From 698cd335a782561b79504d4e98c7df62b08e7abd Mon Sep 17 00:00:00 2001 From: Albert Herranz Date: Thu, 17 Dec 2009 08:33:41 +0000 Subject: [PATCH 421/618] powerpc/gamecube/wii: Fix off-by-one error in ugecon/usbgecko_udbg The retry logic in ug_putc() is broken. If the TX fifo is not ready and the counter runs out it will have a value of -1 and no transfer should be attempted. Also, a counter with a value of 0 means that the TX fifo got ready in the last try and the transfer should be attempted. Reported-by: "Juha Leppanen" Signed-off-by: "Juha Leppanen" Signed-off-by: Albert Herranz Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/ugecon.c | 2 +- arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/ugecon.c b/arch/powerpc/boot/ugecon.c index 50609ea6ddf8..8f2a6b311534 100644 --- a/arch/powerpc/boot/ugecon.c +++ b/arch/powerpc/boot/ugecon.c @@ -86,7 +86,7 @@ static void ug_putc(char ch) while (!ug_is_txfifo_ready() && count--) barrier(); - if (count) + if (count >= 0) ug_raw_putc(ch); } diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c index edc956cc8b13..20a8ed91962e 100644 --- a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c +++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c @@ -120,7 +120,7 @@ static void ug_putc(char ch) while (!ug_is_txfifo_ready() && count--) barrier(); - if (count) + if (count >= 0) ug_raw_putc(ch); } -- GitLab From 18374d89e5fe96772102f44f535efb1198d9be08 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 17 Dec 2009 18:29:46 -0800 Subject: [PATCH 422/618] x86, irq: Allow 0xff for /proc/irq/[n]/smp_affinity on an 8-cpu system John Blackwood reported: > on an older Dell PowerEdge 6650 system with 8 cpus (4 are hyper-threaded), > and 32 bit (x86) kernel, once you change the irq smp_affinity of an irq > to be less than all cpus in the system, you can never change really the > irq smp_affinity back to be all cpus in the system (0xff) again, > even though no error status is returned on the "/bin/echo ff > > /proc/irq/[n]/smp_affinity" operation. > > This is due to that fact that BAD_APICID has the same value as > all cpus (0xff) on 32bit kernels, and thus the value returned from > set_desc_affinity() via the cpu_mask_to_apicid_and() function is treated > as a failure in set_ioapic_affinity_irq_desc(), and no affinity changes > are made. set_desc_affinity() is already checking if the incoming cpu mask intersects with the cpu online mask or not. So there is no need for the apic op cpu_mask_to_apicid_and() to check again and return BAD_APICID. Remove the BAD_APICID return value from cpu_mask_to_apicid_and() and also fix set_desc_affinity() to return -1 instead of using BAD_APICID to represent error conditions (as cpu_mask_to_apicid_and() can return logical or physical apicid values and BAD_APICID is really to represent bad physical apic id). Reported-by: John Blackwood Root-caused-by: John Blackwood Signed-off-by: Suresh Siddha LKML-Reference: <1261103386.2535.409.camel@sbs-t61> Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/hw_irq.h | 3 ++- arch/x86/kernel/apic/apic_flat_64.c | 5 +---- arch/x86/kernel/apic/bigsmp_32.c | 5 +---- arch/x86/kernel/apic/io_apic.c | 32 ++++++++++++--------------- arch/x86/kernel/apic/x2apic_cluster.c | 5 +---- arch/x86/kernel/apic/x2apic_phys.c | 5 +---- arch/x86/kernel/apic/x2apic_uv_x.c | 5 +---- arch/x86/kernel/uv_irq.c | 3 +-- 8 files changed, 22 insertions(+), 41 deletions(-) diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index 08c48a81841f..eeac829a0f44 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -103,7 +103,8 @@ extern int assign_irq_vector(int, struct irq_cfg *, const struct cpumask *); extern void send_cleanup_vector(struct irq_cfg *); struct irq_desc; -extern unsigned int set_desc_affinity(struct irq_desc *, const struct cpumask *); +extern unsigned int set_desc_affinity(struct irq_desc *, const struct cpumask *, + unsigned int *dest_id); extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin, struct io_apic_irq_attr *irq_attr); extern void setup_ioapic_dest(void); diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index d0c99abc26c3..eacbd2b31d27 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -306,10 +306,7 @@ physflat_cpu_mask_to_apicid_and(const struct cpumask *cpumask, if (cpumask_test_cpu(cpu, cpu_online_mask)) break; } - if (cpu < nr_cpu_ids) - return per_cpu(x86_cpu_to_apicid, cpu); - - return BAD_APICID; + return per_cpu(x86_cpu_to_apicid, cpu); } struct apic apic_physflat = { diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c index 38dcecfa5818..cb804c5091b9 100644 --- a/arch/x86/kernel/apic/bigsmp_32.c +++ b/arch/x86/kernel/apic/bigsmp_32.c @@ -131,10 +131,7 @@ static unsigned int bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask, if (cpumask_test_cpu(cpu, cpu_online_mask)) break; } - if (cpu < nr_cpu_ids) - return bigsmp_cpu_to_logical_apicid(cpu); - - return BAD_APICID; + return bigsmp_cpu_to_logical_apicid(cpu); } static int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index d5d498fbee4b..98ced709e829 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2276,26 +2276,28 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq /* * Either sets desc->affinity to a valid value, and returns - * ->cpu_mask_to_apicid of that, or returns BAD_APICID and + * ->cpu_mask_to_apicid of that in dest_id, or returns -1 and * leaves desc->affinity untouched. */ unsigned int -set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask) +set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask, + unsigned int *dest_id) { struct irq_cfg *cfg; unsigned int irq; if (!cpumask_intersects(mask, cpu_online_mask)) - return BAD_APICID; + return -1; irq = desc->irq; cfg = desc->chip_data; if (assign_irq_vector(irq, cfg, mask)) - return BAD_APICID; + return -1; cpumask_copy(desc->affinity, mask); - return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain); + *dest_id = apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain); + return 0; } static int @@ -2311,12 +2313,11 @@ set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask) cfg = desc->chip_data; spin_lock_irqsave(&ioapic_lock, flags); - dest = set_desc_affinity(desc, mask); - if (dest != BAD_APICID) { + ret = set_desc_affinity(desc, mask, &dest); + if (!ret) { /* Only the high 8 bits are valid. */ dest = SET_APIC_LOGICAL_ID(dest); __target_IO_APIC_irq(irq, dest, cfg); - ret = 0; } spin_unlock_irqrestore(&ioapic_lock, flags); @@ -3351,8 +3352,7 @@ static int set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) struct msi_msg msg; unsigned int dest; - dest = set_desc_affinity(desc, mask); - if (dest == BAD_APICID) + if (set_desc_affinity(desc, mask, &dest)) return -1; cfg = desc->chip_data; @@ -3384,8 +3384,7 @@ ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) if (get_irte(irq, &irte)) return -1; - dest = set_desc_affinity(desc, mask); - if (dest == BAD_APICID) + if (set_desc_affinity(desc, mask, &dest)) return -1; irte.vector = cfg->vector; @@ -3567,8 +3566,7 @@ static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) struct msi_msg msg; unsigned int dest; - dest = set_desc_affinity(desc, mask); - if (dest == BAD_APICID) + if (set_desc_affinity(desc, mask, &dest)) return -1; cfg = desc->chip_data; @@ -3623,8 +3621,7 @@ static int hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask) struct msi_msg msg; unsigned int dest; - dest = set_desc_affinity(desc, mask); - if (dest == BAD_APICID) + if (set_desc_affinity(desc, mask, &dest)) return -1; cfg = desc->chip_data; @@ -3730,8 +3727,7 @@ static int set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask) struct irq_cfg *cfg; unsigned int dest; - dest = set_desc_affinity(desc, mask); - if (dest == BAD_APICID) + if (set_desc_affinity(desc, mask, &dest)) return -1; cfg = desc->chip_data; diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c index a5371ec36776..cf69c59f4910 100644 --- a/arch/x86/kernel/apic/x2apic_cluster.c +++ b/arch/x86/kernel/apic/x2apic_cluster.c @@ -148,10 +148,7 @@ x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask, break; } - if (cpu < nr_cpu_ids) - return per_cpu(x86_cpu_to_logical_apicid, cpu); - - return BAD_APICID; + return per_cpu(x86_cpu_to_logical_apicid, cpu); } static unsigned int x2apic_cluster_phys_get_apic_id(unsigned long x) diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c index a8989aadc99a..8972f38c5ced 100644 --- a/arch/x86/kernel/apic/x2apic_phys.c +++ b/arch/x86/kernel/apic/x2apic_phys.c @@ -146,10 +146,7 @@ x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask, break; } - if (cpu < nr_cpu_ids) - return per_cpu(x86_cpu_to_apicid, cpu); - - return BAD_APICID; + return per_cpu(x86_cpu_to_apicid, cpu); } static unsigned int x2apic_phys_get_apic_id(unsigned long x) diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index b684bb303cbf..d56b0efb2057 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -225,10 +225,7 @@ uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask, if (cpumask_test_cpu(cpu, cpu_online_mask)) break; } - if (cpu < nr_cpu_ids) - return per_cpu(x86_cpu_to_apicid, cpu); - - return BAD_APICID; + return per_cpu(x86_cpu_to_apicid, cpu); } static unsigned int x2apic_get_apic_id(unsigned long x) diff --git a/arch/x86/kernel/uv_irq.c b/arch/x86/kernel/uv_irq.c index 61d805df4c91..ece73d8e3240 100644 --- a/arch/x86/kernel/uv_irq.c +++ b/arch/x86/kernel/uv_irq.c @@ -215,8 +215,7 @@ static int uv_set_irq_affinity(unsigned int irq, const struct cpumask *mask) unsigned long mmr_offset; unsigned mmr_pnode; - dest = set_desc_affinity(desc, mask); - if (dest == BAD_APICID) + if (set_desc_affinity(desc, mask, &dest)) return -1; mmr_value = 0; -- GitLab From 21797c599c710d3851d241c4b50690f2482bf618 Mon Sep 17 00:00:00 2001 From: Daniele Calore Date: Tue, 8 Dec 2009 13:59:47 -0500 Subject: [PATCH 423/618] alpha: Wire up missing/new syscalls This wire up the: fallocate, timerfd_create, timerfd_settime, timerfd_gettime, signalfd4, eventfd2, epoll_create1, dup3, pipe2, inotify_init1, preadv, pwritev and rt_tgsigqueueinfo syscalls for the alpha port. For umount2, alpha have an "old" and "new" version called: oldumount and umount; so ignore umount2. Rebased on top of 6e17e8b9fb74b9fb9f6ea331f7f4a049c5b4c4b8 by Matt Turner. Signed-off-by: Daniele Calore Cc: Richard Henderson Cc: Ivan Kokshaysky Signed-off-by: Matt Turner --- arch/alpha/include/asm/unistd.h | 16 +++++++++++++++- arch/alpha/kernel/systbls.S | 15 ++++++++++++++- 2 files changed, 29 insertions(+), 2 deletions(-) diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index 7f23665122df..62e823e68f65 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -247,6 +247,7 @@ #define __IGNORE_pause #define __IGNORE_time #define __IGNORE_utime +#define __IGNORE_umount2 /* * Linux-specific system calls begin at 300 @@ -434,10 +435,23 @@ #define __NR_timerfd 477 #define __NR_eventfd 478 #define __NR_recvmmsg 479 +#define __NR_fallocate 480 +#define __NR_timerfd_create 481 +#define __NR_timerfd_settime 482 +#define __NR_timerfd_gettime 483 +#define __NR_signalfd4 484 +#define __NR_eventfd2 485 +#define __NR_epoll_create1 486 +#define __NR_dup3 487 +#define __NR_pipe2 488 +#define __NR_inotify_init1 489 +#define __NR_preadv 490 +#define __NR_pwritev 491 +#define __NR_rt_tgsigqueueinfo 492 #ifdef __KERNEL__ -#define NR_SYSCALLS 480 +#define NR_SYSCALLS 493 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index cda6b8b3d573..d0bc3c8c3ed3 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -495,9 +495,22 @@ sys_call_table: .quad sys_epoll_pwait .quad sys_utimensat /* 475 */ .quad sys_signalfd - .quad sys_ni_syscall + .quad sys_ni_syscall /* sys_timerfd */ .quad sys_eventfd .quad sys_recvmmsg + .quad sys_fallocate /* 480 */ + .quad sys_timerfd_create + .quad sys_timerfd_settime + .quad sys_timerfd_gettime + .quad sys_signalfd4 + .quad sys_eventfd2 /* 485 */ + .quad sys_epoll_create1 + .quad sys_dup3 + .quad sys_pipe2 + .quad sys_inotify_init1 + .quad sys_preadv /* 490 */ + .quad sys_pwritev + .quad sys_rt_tgsigqueueinfo .size sys_call_table, . - sys_call_table .type sys_call_table, @object -- GitLab From a582e6f01b90211933e70edcec9bc0bbb1157402 Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Tue, 8 Dec 2009 14:27:01 -0500 Subject: [PATCH 424/618] alpha: Add minimal support for software performance events In the kernel the patch enables configuration of the perf event option, adds the perf_event_open syscall, and includes a minimal architecture specific asm/perf_event.h header file. Signed-off-by: Michael Cree Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Ingo Molnar Signed-off-by: Matt Turner --- arch/alpha/Kconfig | 1 + arch/alpha/include/asm/perf_event.h | 9 +++++++++ arch/alpha/include/asm/unistd.h | 3 ++- arch/alpha/kernel/systbls.S | 1 + 4 files changed, 13 insertions(+), 1 deletion(-) create mode 100644 arch/alpha/include/asm/perf_event.h diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 443448154f32..bd7261ea8f94 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -9,6 +9,7 @@ config ALPHA select HAVE_IDE select HAVE_OPROFILE select HAVE_SYSCALL_WRAPPERS + select HAVE_PERF_EVENTS help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/arch/alpha/include/asm/perf_event.h b/arch/alpha/include/asm/perf_event.h new file mode 100644 index 000000000000..3bef8522017c --- /dev/null +++ b/arch/alpha/include/asm/perf_event.h @@ -0,0 +1,9 @@ +#ifndef __ASM_ALPHA_PERF_EVENT_H +#define __ASM_ALPHA_PERF_EVENT_H + +/* Alpha only supports software events through this interface. */ +static inline void set_perf_event_pending(void) { } + +#define PERF_EVENT_INDEX_OFFSET 0 + +#endif /* __ASM_ALPHA_PERF_EVENT_H */ diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index 62e823e68f65..804e5311c841 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -448,10 +448,11 @@ #define __NR_preadv 490 #define __NR_pwritev 491 #define __NR_rt_tgsigqueueinfo 492 +#define __NR_perf_event_open 493 #ifdef __KERNEL__ -#define NR_SYSCALLS 493 +#define NR_SYSCALLS 494 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index d0bc3c8c3ed3..09acb786e72b 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -511,6 +511,7 @@ sys_call_table: .quad sys_preadv /* 490 */ .quad sys_pwritev .quad sys_rt_tgsigqueueinfo + .quad sys_perf_event_open .size sys_call_table, . - sys_call_table .type sys_call_table, @object -- GitLab From acadbfb90a54673d6c8b05aa4e93218433890411 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 10 Dec 2009 18:07:24 -0500 Subject: [PATCH 425/618] alpha: Convert BUG() to use unreachable() Use the new unreachable() macro instead of for(;;); Signed-off-by: David Daney CC: Richard Henderson CC: Ivan Kokshaysky CC: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner --- arch/alpha/include/asm/bug.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/alpha/include/asm/bug.h b/arch/alpha/include/asm/bug.h index 1720c8ad86fe..f091682e3cc8 100644 --- a/arch/alpha/include/asm/bug.h +++ b/arch/alpha/include/asm/bug.h @@ -13,7 +13,8 @@ "call_pal %0 # bugchk\n\t" \ ".long %1\n\t.8byte %2" \ : : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__)); \ - for ( ; ; ); } while (0) + unreachable(); \ + } while (0) #define HAVE_ARCH_BUG #endif -- GitLab From 2fef62c825f09e29d2f52dc187ddf6f99e28c7f1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 18 Dec 2009 08:48:42 +0100 Subject: [PATCH 426/618] ALSA: hda - Fix quirk for Maxdata obook4-1 Works fine with the auto-parser. Reference: Novell bnc#564940 https://bugzilla.novell.com/show_bug.cgi?id=564940 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d9a9f0c7cf5b..84bc2c7c4421 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8921,7 +8921,7 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = { SND_PCI_QUIRK(0x1462, 0x040d, "MSI", ALC883_TARGA_2ch_DIG), SND_PCI_QUIRK(0x1462, 0x0579, "MSI", ALC883_TARGA_2ch_DIG), SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8 */ - SND_PCI_QUIRK(0x1462, 0x2fb3, "MSI", ALC883_TARGA_2ch_DIG), + SND_PCI_QUIRK(0x1462, 0x2fb3, "MSI", ALC882_AUTO), SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG), SND_PCI_QUIRK(0x1462, 0x3729, "MSI S420", ALC883_TARGA_DIG), SND_PCI_QUIRK(0x1462, 0x3783, "NEC S970", ALC883_TARGA_DIG), -- GitLab From 3e85fd614c7b6bb7f33bb04a0dcb5a3bfca4c0fe Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 18 Dec 2009 09:27:24 +0100 Subject: [PATCH 427/618] sound: sgio2audio/pdaudiocf/usb-audio: initialize PCM buffer When allocating the PCM buffer, use vmalloc_user() instead of vmalloc(). Otherwise, it would be possible for applications to play the previous contents of the kernel memory to the speakers, or to read it directly if the buffer is exported to userspace. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai --- sound/mips/sgio2audio.c | 2 +- sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c | 2 +- sound/usb/usbaudio.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c index 8691f4cf6191..f1d9d16b5486 100644 --- a/sound/mips/sgio2audio.c +++ b/sound/mips/sgio2audio.c @@ -609,7 +609,7 @@ static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream, /* alloc virtual 'dma' area */ if (runtime->dma_area) vfree(runtime->dma_area); - runtime->dma_area = vmalloc(size); + runtime->dma_area = vmalloc_user(size); if (runtime->dma_area == NULL) return -ENOMEM; runtime->dma_bytes = size; diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c index d057e6489643..5cfa608823f7 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c @@ -51,7 +51,7 @@ static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, size_t s return 0; /* already enough large */ vfree(runtime->dma_area); } - runtime->dma_area = vmalloc_32(size); + runtime->dma_area = vmalloc_32_user(size); if (! runtime->dma_area) return -ENOMEM; runtime->dma_bytes = size; diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index b074a594c595..4963defee18a 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -752,7 +752,7 @@ static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, size_t s return 0; /* already large enough */ vfree(runtime->dma_area); } - runtime->dma_area = vmalloc(size); + runtime->dma_area = vmalloc_user(size); if (!runtime->dma_area) return -ENOMEM; runtime->dma_bytes = size; -- GitLab From 99e8c5a3b875a34d894a711c9a3669858d6adf45 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 17 Dec 2009 01:33:54 +0100 Subject: [PATCH 428/618] hw-breakpoints: Fix hardware breakpoints -> perf events dependency The kbuild's select command doesn't propagate through the config dependencies. Hence the current rules of hardware breakpoint's config can't ensure perf can never be disabled under us. We have: config X86 selects HAVE_HW_BREAKPOINTS config HAVE_HW_BREAKPOINTS select PERF_EVENTS config PERF_EVENTS [...] x86 will select the breakpoints but that won't propagate to perf events. The user can still disable the latter, but it is necessary for the breakpoints. What we need is: - x86 selects HAVE_HW_BREAKPOINTS and PERF_EVENTS - HAVE_HW_BREAKPOINTS depends on PERF_EVENTS so that we ensure PERF_EVENTS is enabled and frozen for x86. This fixes the following kind of build errors: In file included from arch/x86/kernel/hw_breakpoint.c:31: include/linux/hw_breakpoint.h: In function 'hw_breakpoint_addr': include/linux/hw_breakpoint.h:39: error: 'struct perf_event' has no member named 'attr' v2: Select also ANON_INODES from x86, required for perf Reported-by: Cyrill Gorcunov Reported-by: Michal Marek Reported-by: Andrew Randrianasulu Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras Cc: Randy Dunlap Cc: K.Prasad LKML-Reference: <1261010034-7786-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar --- arch/Kconfig | 4 +--- arch/x86/Kconfig | 2 ++ 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/Kconfig b/arch/Kconfig index d82875820a15..9d055b4f0585 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -135,9 +135,7 @@ config HAVE_DEFAULT_NO_SPIN_MUTEXES config HAVE_HW_BREAKPOINT bool - depends on HAVE_PERF_EVENTS - select ANON_INODES - select PERF_EVENTS + depends on PERF_EVENTS config HAVE_USER_RETURN_NOTIFIER bool diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 3b2a5aca4edb..55298e891571 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -50,6 +50,8 @@ config X86 select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA select HAVE_HW_BREAKPOINT + select PERF_EVENTS + select ANON_INODES select HAVE_ARCH_KMEMCHECK select HAVE_USER_RETURN_NOTIFIER -- GitLab From 48c03ce72f2665f79a3fe54fc6d71b8cc3d30803 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 17 Dec 2009 14:51:35 +0100 Subject: [PATCH 429/618] ASoC: wm8974: fix a wrong bit definition The wm8974 datasheet defines BUFIOEN as bit 2. Signed-off-by: Guennadi Liakhovetski Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8974.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c index 81c57b5c591c..a808675388fc 100644 --- a/sound/soc/codecs/wm8974.c +++ b/sound/soc/codecs/wm8974.c @@ -47,7 +47,7 @@ static const u16 wm8974_reg[WM8974_CACHEREGNUM] = { }; #define WM8974_POWER1_BIASEN 0x08 -#define WM8974_POWER1_BUFIOEN 0x10 +#define WM8974_POWER1_BUFIOEN 0x04 struct wm8974_priv { struct snd_soc_codec codec; -- GitLab From b5b60fda1e462a849bc37dfbace2888191be82cc Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 18 Dec 2009 13:03:03 -0200 Subject: [PATCH 430/618] perf session: Make events_stats u64 to avoid overflow on 32-bit arches Pekka Enberg reported weird percentages in perf report. It turns out we are overflowing a 32-bit variables in struct events_stats on 32-bit architectures. Before: [acme@ana linux-2.6-tip]$ perf report -i pekka.perf.data 2> /dev/null | head -10 281.96% Xorg b710a561 [.] 0x000000b710a561 140.15% Xorg [kernel] [k] __initramfs_end 51.56% metacity libgobject-2.0.so.0.2000.1 [.] 0x00000000026e46 35.12% evolution libcairo.so.2.10800.6 [.] 0x000000000203bd 33.84% metacity libpthread-2.9.so [.] 0x00000000007a3d After: [acme@ana linux-2.6-tip]$ perf report -i pekka.perf.data 2> /dev/null | head -10 30.04% Xorg b710a561 [.] 0x000000b710a561 14.93% Xorg [kernel] [k] __initramfs_end 5.49% metacity libgobject-2.0.so.0.2000.1 [.] 0x00000000026e46 3.74% evolution libcairo.so.2.10800.6 [.] 0x000000000203bd 3.61% metacity libpthread-2.9.so [.] 0x00000000007a3d Reported-by: Pekka Enberg Tested-by: Pekka Enberg Signed-off-by: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Paul Mackerras LKML-Reference: <1261148583-20395-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar --- tools/perf/builtin-report.c | 2 +- tools/perf/util/event.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index e50a6b10ee6f..5c2ab5357ec6 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -224,7 +224,7 @@ static int __cmd_report(void) perf_session__collapse_resort(session); perf_session__output_resort(session, session->events_stats.total); - fprintf(stdout, "# Samples: %ld\n#\n", session->events_stats.total); + fprintf(stdout, "# Samples: %Ld\n#\n", session->events_stats.total); perf_session__fprintf_hists(session, NULL, false, stdout); if (sort_order == default_sort_order && parent_pattern == default_parent_pattern) diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h index 8027309b0422..690a96d0467c 100644 --- a/tools/perf/util/event.h +++ b/tools/perf/util/event.h @@ -95,8 +95,8 @@ typedef union event_union { } event_t; struct events_stats { - unsigned long total; - unsigned long lost; + u64 total; + u64 lost; }; void event__print_totals(void); -- GitLab From 70ee9518cfc8baec618e69e4ef22566dcb2f29d3 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 18 Dec 2009 17:43:14 +0100 Subject: [PATCH 431/618] [S390] wire up sys_recvmmsg Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/unistd.h | 3 ++- arch/s390/kernel/compat_wrapper.S | 9 +++++++++ arch/s390/kernel/syscalls.S | 1 + 3 files changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h index cb5232df151e..192a7203a14f 100644 --- a/arch/s390/include/asm/unistd.h +++ b/arch/s390/include/asm/unistd.h @@ -269,7 +269,8 @@ #define __NR_pwritev 329 #define __NR_rt_tgsigqueueinfo 330 #define __NR_perf_event_open 331 -#define NR_syscalls 332 +#define __NR_recvmmsg 332 +#define NR_syscalls 333 /* * There are some system calls that are not present on 64 bit, some diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 30de2d0e52bb..faeaccc7d7d9 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1853,3 +1853,12 @@ sys32_execve_wrapper: llgtr %r3,%r3 # compat_uptr_t * llgtr %r4,%r4 # compat_uptr_t * jg sys32_execve # branch to system call + + .globl compat_sys_recvmmsg_wrapper +compat_sys_recvmmsg_wrapper: + lgfr %r2,%r2 # int + llgtr %r3,%r3 # struct compat_mmsghdr * + llgfr %r4,%r4 # unsigned int + llgfr %r5,%r5 # unsigned int + llgtr %r6,%r6 # struct compat_timespec * + jg compat_sys_recvmmsg diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 30eca070d426..4f292c936872 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -340,3 +340,4 @@ SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper) SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper) SYSCALL(sys_rt_tgsigqueueinfo,sys_rt_tgsigqueueinfo,compat_sys_rt_tgsigqueueinfo_wrapper) /* 330 */ SYSCALL(sys_perf_event_open,sys_perf_event_open,sys_perf_event_open_wrapper) +SYSCALL(sys_recvmmsg,sys_recvmmsg,compat_sys_recvmmsg_wrapper) -- GitLab From ffa8d2a3e80a3f0dee9886947dbd506d2bb226d2 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Fri, 18 Dec 2009 17:43:15 +0100 Subject: [PATCH 432/618] [S390] cio: fix drvdata usage for the console subchannel Using dev_set_drvdata prior to device_register will force the driver core to kmalloc its private data. Since we use this for the console subchannel lets set the drvdata before taking the subchannels spinlock. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 73901c9e260f..a6c7d5426fb2 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1519,6 +1519,7 @@ static int ccw_device_console_enable(struct ccw_device *cdev, sch->driver = &io_subchannel_driver; /* Initialize the ccw_device structure. */ cdev->dev.parent= &sch->dev; + sch_set_cdev(sch, cdev); io_subchannel_recog(cdev, sch); /* Now wait for the async. recognition to come to an end. */ spin_lock_irq(cdev->ccwlock); -- GitLab From ea058544542a60e92fd023d93aa901709be18daa Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Fri, 18 Dec 2009 17:43:16 +0100 Subject: [PATCH 433/618] [S390] dasd: move dasd-diag kmsg to dasd The DIAG discipline does not have a own driver name. It shows up as dasd-eckd or dasd-fba. So messages for dasd-diag are moved to the generic dasd part. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_diag.c | 42 ++++++++++++++++++---------------- 1 file changed, 22 insertions(+), 20 deletions(-) diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index f64d0db881b4..6e14863f5c70 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -8,7 +8,7 @@ * */ -#define KMSG_COMPONENT "dasd-diag" +#define KMSG_COMPONENT "dasd" #include #include @@ -146,16 +146,16 @@ dasd_diag_erp(struct dasd_device *device) rc = mdsk_init_io(device, device->block->bp_block, 0, NULL); if (rc == 4) { if (!(device->features & DASD_FEATURE_READONLY)) { - dev_warn(&device->cdev->dev, - "The access mode of a DIAG device changed" - " to read-only"); + pr_warning("%s: The access mode of a DIAG device " + "changed to read-only\n", + dev_name(&device->cdev->dev)); device->features |= DASD_FEATURE_READONLY; } rc = 0; } if (rc) - dev_warn(&device->cdev->dev, "DIAG ERP failed with " - "rc=%d\n", rc); + pr_warning("%s: DIAG ERP failed with " + "rc=%d\n", dev_name(&device->cdev->dev), rc); } /* Start a given request at the device. Return zero on success, non-zero @@ -371,8 +371,9 @@ dasd_diag_check_device(struct dasd_device *device) private->pt_block = 2; break; default: - dev_warn(&device->cdev->dev, "Device type %d is not supported " - "in DIAG mode\n", private->rdc_data.vdev_class); + pr_warning("%s: Device type %d is not supported " + "in DIAG mode\n", dev_name(&device->cdev->dev), + private->rdc_data.vdev_class); rc = -EOPNOTSUPP; goto out; } @@ -413,8 +414,8 @@ dasd_diag_check_device(struct dasd_device *device) private->iob.flaga = DASD_DIAG_FLAGA_DEFAULT; rc = dia250(&private->iob, RW_BIO); if (rc == 3) { - dev_warn(&device->cdev->dev, - "A 64-bit DIAG call failed\n"); + pr_warning("%s: A 64-bit DIAG call failed\n", + dev_name(&device->cdev->dev)); rc = -EOPNOTSUPP; goto out_label; } @@ -423,8 +424,9 @@ dasd_diag_check_device(struct dasd_device *device) break; } if (bsize > PAGE_SIZE) { - dev_warn(&device->cdev->dev, "Accessing the DASD failed because" - " of an incorrect format (rc=%d)\n", rc); + pr_warning("%s: Accessing the DASD failed because of an " + "incorrect format (rc=%d)\n", + dev_name(&device->cdev->dev), rc); rc = -EIO; goto out_label; } @@ -442,18 +444,18 @@ dasd_diag_check_device(struct dasd_device *device) block->s2b_shift++; rc = mdsk_init_io(device, block->bp_block, 0, NULL); if (rc && (rc != 4)) { - dev_warn(&device->cdev->dev, "DIAG initialization " - "failed with rc=%d\n", rc); + pr_warning("%s: DIAG initialization failed with rc=%d\n", + dev_name(&device->cdev->dev), rc); rc = -EIO; } else { if (rc == 4) device->features |= DASD_FEATURE_READONLY; - dev_info(&device->cdev->dev, - "New DASD with %ld byte/block, total size %ld KB%s\n", - (unsigned long) block->bp_block, - (unsigned long) (block->blocks << - block->s2b_shift) >> 1, - (rc == 4) ? ", read-only device" : ""); + pr_info("%s: New DASD with %ld byte/block, total size %ld " + "KB%s\n", dev_name(&device->cdev->dev), + (unsigned long) block->bp_block, + (unsigned long) (block->blocks << + block->s2b_shift) >> 1, + (rc == 4) ? ", read-only device" : ""); rc = 0; } out_label: -- GitLab From 6d53cfe590c17c28ebae2c869bb7a5ab9554b4da Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 18 Dec 2009 17:43:17 +0100 Subject: [PATCH 434/618] [S390] dasd: PTR_ERR return of wrong pointer in Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_alias.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index fd1231738ef4..148b1dd24070 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -218,7 +218,7 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) spin_unlock_irqrestore(&aliastree.lock, flags); newlcu = _allocate_lcu(uid); if (IS_ERR(newlcu)) - return PTR_ERR(lcu); + return PTR_ERR(newlcu); spin_lock_irqsave(&aliastree.lock, flags); lcu = _find_lcu(server, uid); if (!lcu) { -- GitLab From b59cdcb339fc7286161b80403f6af63acf26876f Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 18 Dec 2009 17:43:18 +0100 Subject: [PATCH 435/618] [S390] s390: PTR_ERR return of wrong pointer in fallback_init_cip() Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin Signed-off-by: Martin Schwidefsky --- arch/s390/crypto/aes_s390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 6118890c946d..6be4503201ac 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -174,7 +174,7 @@ static int fallback_init_cip(struct crypto_tfm *tfm) if (IS_ERR(sctx->fallback.cip)) { pr_err("Allocating AES fallback algorithm %s failed\n", name); - return PTR_ERR(sctx->fallback.blk); + return PTR_ERR(sctx->fallback.cip); } return 0; -- GitLab From 2b31001d306a2b5fd690eee878d2ee61a0a0674c Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 18 Dec 2009 17:43:19 +0100 Subject: [PATCH 436/618] [S390] tty: PTR_ERR return of wrong pointer in fs3270_open() Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin Signed-off-by: Martin Schwidefsky --- drivers/s390/char/fs3270.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c index 28e4649fa9e4..247b2b934728 100644 --- a/drivers/s390/char/fs3270.c +++ b/drivers/s390/char/fs3270.c @@ -467,7 +467,7 @@ fs3270_open(struct inode *inode, struct file *filp) if (IS_ERR(ib)) { raw3270_put_view(&fp->view); raw3270_del_view(&fp->view); - rc = PTR_ERR(fp); + rc = PTR_ERR(ib); goto out; } fp->rdbuf = ib; -- GitLab From 622e99bf0d54c4517cb0524540cd77257db8621a Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 18 Dec 2009 17:43:20 +0100 Subject: [PATCH 437/618] [S390] rename NT_PRXSTATUS to NT_S390_HIGHREGS The elf notes number for the upper register halves is s390 specific. Change the name of the elf notes to include S390. Signed-off-by: Martin Schwidefsky Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ptrace.c | 2 +- include/linux/elf.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 653c6a178740..13815d39f7dd 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -959,7 +959,7 @@ static const struct user_regset s390_compat_regsets[] = { .set = s390_fpregs_set, }, [REGSET_GENERAL_EXTENDED] = { - .core_note_type = NT_PRXSTATUS, + .core_note_type = NT_S390_HIGH_GPRS, .n = sizeof(s390_compat_regs_high) / sizeof(compat_long_t), .size = sizeof(compat_long_t), .align = sizeof(compat_long_t), diff --git a/include/linux/elf.h b/include/linux/elf.h index 90a4ed0ea0e5..0cc4d55151b7 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -361,7 +361,7 @@ typedef struct elf64_shdr { #define NT_PPC_VSX 0x102 /* PowerPC VSX registers */ #define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ #define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */ -#define NT_PRXSTATUS 0x300 /* s390 upper register halves */ +#define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */ /* Note header in a PT_NOTE section */ -- GitLab From bb509912481214cf6ad1181c968295c62ff1ad9e Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Fri, 18 Dec 2009 17:43:21 +0100 Subject: [PATCH 438/618] [S390] tape: Add pr_fmt() macro to all tape source files Without defining the pr_fmt() macro, the "tape: " prefix will not be printed when using the pr_xxx printk macros. This patch adds the missing definitions. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tape_34xx.c | 1 + drivers/s390/char/tape_3590.c | 1 + drivers/s390/char/tape_block.c | 1 + drivers/s390/char/tape_char.c | 3 +++ drivers/s390/char/tape_class.c | 4 ++++ drivers/s390/char/tape_core.c | 2 ++ drivers/s390/char/tape_proc.c | 3 +++ drivers/s390/char/tape_std.c | 3 +++ 8 files changed, 18 insertions(+) diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c index 3657fe103c27..cb70fa1cf539 100644 --- a/drivers/s390/char/tape_34xx.c +++ b/drivers/s390/char/tape_34xx.c @@ -9,6 +9,7 @@ */ #define KMSG_COMPONENT "tape_34xx" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt #include #include diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index 0c72aadb8391..b2eb94aab022 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -9,6 +9,7 @@ */ #define KMSG_COMPONENT "tape_3590" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt #include #include diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index 4799cc2f73c3..96816149368a 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -11,6 +11,7 @@ */ #define KMSG_COMPONENT "tape" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt #include #include diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c index 23d773a0d113..2125ec7d95f0 100644 --- a/drivers/s390/char/tape_char.c +++ b/drivers/s390/char/tape_char.c @@ -10,6 +10,9 @@ * Martin Schwidefsky */ +#define KMSG_COMPONENT "tape" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + #include #include #include diff --git a/drivers/s390/char/tape_class.c b/drivers/s390/char/tape_class.c index ddc914ccea8f..b2864e3edb6d 100644 --- a/drivers/s390/char/tape_class.c +++ b/drivers/s390/char/tape_class.c @@ -7,6 +7,10 @@ * Author: Stefan Bader * Based on simple class device code by Greg K-H */ + +#define KMSG_COMPONENT "tape" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + #include "tape_class.h" MODULE_AUTHOR("Stefan Bader "); diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index f5d6802dc5da..81b094e480e6 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -12,6 +12,8 @@ */ #define KMSG_COMPONENT "tape" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + #include #include // for kernel parameters #include // for requesting modules diff --git a/drivers/s390/char/tape_proc.c b/drivers/s390/char/tape_proc.c index ebd820ccfb24..0ceb37984f77 100644 --- a/drivers/s390/char/tape_proc.c +++ b/drivers/s390/char/tape_proc.c @@ -11,6 +11,9 @@ * PROCFS Functions */ +#define KMSG_COMPONENT "tape" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + #include #include #include diff --git a/drivers/s390/char/tape_std.c b/drivers/s390/char/tape_std.c index 750354ad16e5..03f07e5dd6e9 100644 --- a/drivers/s390/char/tape_std.c +++ b/drivers/s390/char/tape_std.c @@ -11,6 +11,9 @@ * Stefan Bader */ +#define KMSG_COMPONENT "tape" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + #include #include #include -- GitLab From 83e56d0b23f91b70a7e708ce0979a57b6c6a1507 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 18 Dec 2009 17:43:22 +0100 Subject: [PATCH 439/618] [S390] drivers: Correct size given to memset Memset should be given the size of the structure, not the size of the pointer. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ type T; T *x; expression E; @@ memset(x, E, sizeof( + * x)) // Signed-off-by: Julia Lawall Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/fcx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/cio/fcx.c b/drivers/s390/cio/fcx.c index 61677dfbdc9b..ca5e9bb9d458 100644 --- a/drivers/s390/cio/fcx.c +++ b/drivers/s390/cio/fcx.c @@ -163,7 +163,7 @@ void tcw_finalize(struct tcw *tcw, int num_tidaws) /* Add tcat to tccb. */ tccb = tcw_get_tccb(tcw); tcat = (struct tccb_tcat *) &tccb->tca[tca_size(tccb)]; - memset(tcat, 0, sizeof(tcat)); + memset(tcat, 0, sizeof(*tcat)); /* Calculate tcw input/output count and tcat transport count. */ count = calc_dcw_count(tccb); if (tcw->w && (tcw->flags & TCW_FLAGS_OUTPUT_TIDA)) @@ -269,7 +269,7 @@ EXPORT_SYMBOL(tccb_init); */ void tsb_init(struct tsb *tsb) { - memset(tsb, 0, sizeof(tsb)); + memset(tsb, 0, sizeof(*tsb)); } EXPORT_SYMBOL(tsb_init); -- GitLab From d302e1a5dbe1677a495033a2d310656a55139cdf Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Fri, 18 Dec 2009 17:43:23 +0100 Subject: [PATCH 440/618] [S390] cio: fix channel path vary Channel path vary is currently broken: channel paths which are varied offline are still used by Linux. The reason for this is that: * the path mask indicating which paths of an I/O device can be used is reset by each internal I/O request * the logic that checks if a path group is already in its designated target state incorrectly interprets the result "is correctly set" as "is correctly set and available" Fix this by resetting the path mask only for internal I/O requests which affect the path mask and by correcting the pgid check logic. Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/ccwreq.c | 3 --- drivers/s390/cio/device_pgid.c | 29 ++++++++++++++++++----------- drivers/s390/cio/io_sch.h | 1 + 3 files changed, 19 insertions(+), 14 deletions(-) diff --git a/drivers/s390/cio/ccwreq.c b/drivers/s390/cio/ccwreq.c index 9509e3860934..7a28a3029a3f 100644 --- a/drivers/s390/cio/ccwreq.c +++ b/drivers/s390/cio/ccwreq.c @@ -49,7 +49,6 @@ static u16 ccwreq_next_path(struct ccw_device *cdev) */ static void ccwreq_stop(struct ccw_device *cdev, int rc) { - struct subchannel *sch = to_subchannel(cdev->dev.parent); struct ccw_request *req = &cdev->private->req; if (req->done) @@ -57,7 +56,6 @@ static void ccwreq_stop(struct ccw_device *cdev, int rc) req->done = 1; ccw_device_set_timeout(cdev, 0); memset(&cdev->private->irb, 0, sizeof(struct irb)); - sch->lpm = sch->schib.pmcw.pam; if (rc && rc != -ENODEV && req->drc) rc = req->drc; req->callback(cdev, req->data, rc); @@ -80,7 +78,6 @@ static void ccwreq_do(struct ccw_device *cdev) continue; } /* Perform start function. */ - sch->lpm = 0xff; memset(&cdev->private->irb, 0, sizeof(struct irb)); rc = cio_start(sch, cp, (u8) req->mask); if (rc == 0) { diff --git a/drivers/s390/cio/device_pgid.c b/drivers/s390/cio/device_pgid.c index aad188e43b4f..6facb5499a65 100644 --- a/drivers/s390/cio/device_pgid.c +++ b/drivers/s390/cio/device_pgid.c @@ -142,7 +142,7 @@ static void spid_do(struct ccw_device *cdev) u8 fn; /* Use next available path that is not already in correct state. */ - req->lpm = lpm_adjust(req->lpm, sch->schib.pmcw.pam & ~sch->vpm); + req->lpm = lpm_adjust(req->lpm, cdev->private->pgid_todo_mask); if (!req->lpm) goto out_nopath; /* Channel program setup. */ @@ -254,15 +254,15 @@ static void pgid_analyze(struct ccw_device *cdev, struct pgid **p, *p = first; } -static u8 pgid_to_vpm(struct ccw_device *cdev) +static u8 pgid_to_donepm(struct ccw_device *cdev) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct pgid *pgid; int i; int lpm; - u8 vpm = 0; + u8 donepm = 0; - /* Set VPM bits for paths which are already in the target state. */ + /* Set bits for paths which are already in the target state. */ for (i = 0; i < 8; i++) { lpm = 0x80 >> i; if ((cdev->private->pgid_valid_mask & lpm) == 0) @@ -282,10 +282,10 @@ static u8 pgid_to_vpm(struct ccw_device *cdev) if (pgid->inf.ps.state3 != SNID_STATE3_SINGLE_PATH) continue; } - vpm |= lpm; + donepm |= lpm; } - return vpm; + return donepm; } static void pgid_fill(struct ccw_device *cdev, struct pgid *pgid) @@ -307,6 +307,7 @@ static void snid_done(struct ccw_device *cdev, int rc) int mismatch = 0; int reserved = 0; int reset = 0; + u8 donepm; if (rc) goto out; @@ -316,18 +317,20 @@ static void snid_done(struct ccw_device *cdev, int rc) else if (mismatch) rc = -EOPNOTSUPP; else { - sch->vpm = pgid_to_vpm(cdev); + donepm = pgid_to_donepm(cdev); + sch->vpm = donepm & sch->opm; + cdev->private->pgid_todo_mask &= ~donepm; pgid_fill(cdev, pgid); } out: CIO_MSG_EVENT(2, "snid: device 0.%x.%04x: rc=%d pvm=%02x vpm=%02x " - "mism=%d rsvd=%d reset=%d\n", id->ssid, id->devno, rc, - cdev->private->pgid_valid_mask, sch->vpm, mismatch, - reserved, reset); + "todo=%02x mism=%d rsvd=%d reset=%d\n", id->ssid, + id->devno, rc, cdev->private->pgid_valid_mask, sch->vpm, + cdev->private->pgid_todo_mask, mismatch, reserved, reset); switch (rc) { case 0: /* Anything left to do? */ - if (sch->vpm == sch->schib.pmcw.pam) { + if (cdev->private->pgid_todo_mask == 0) { verify_done(cdev, sch->vpm == 0 ? -EACCES : 0); return; } @@ -411,6 +414,7 @@ static void verify_start(struct ccw_device *cdev) struct ccw_dev_id *devid = &cdev->private->dev_id; sch->vpm = 0; + sch->lpm = sch->schib.pmcw.pam; /* Initialize request data. */ memset(req, 0, sizeof(*req)); req->timeout = PGID_TIMEOUT; @@ -442,11 +446,14 @@ static void verify_start(struct ccw_device *cdev) */ void ccw_device_verify_start(struct ccw_device *cdev) { + struct subchannel *sch = to_subchannel(cdev->dev.parent); + CIO_TRACE_EVENT(4, "vrfy"); CIO_HEX_EVENT(4, &cdev->private->dev_id, sizeof(cdev->private->dev_id)); /* Initialize PGID data. */ memset(cdev->private->pgid, 0, sizeof(cdev->private->pgid)); cdev->private->pgid_valid_mask = 0; + cdev->private->pgid_todo_mask = sch->schib.pmcw.pam; /* * Initialize pathgroup and multipath state with target values. * They may change in the course of path verification. diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h index d72ae4c93af9..b9ce712a7f25 100644 --- a/drivers/s390/cio/io_sch.h +++ b/drivers/s390/cio/io_sch.h @@ -150,6 +150,7 @@ struct ccw_device_private { struct ccw_request req; /* internal I/O request */ int iretry; u8 pgid_valid_mask; /* mask of valid PGIDs */ + u8 pgid_todo_mask; /* mask of PGIDs to be adjusted */ struct { unsigned int fast:1; /* post with "channel end" */ unsigned int repall:1; /* report every interrupt status */ -- GitLab From ca633fd006486ed2c2d3b542283067aab61e6dc8 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 18 Dec 2009 17:43:24 +0100 Subject: [PATCH 441/618] [S390] ptrace: dont abuse PT_PTRACED Nobody except ptrace itself should use task->ptrace or PT_PTRACED directly, change arch/s390/kernel/traps.c to use the helper. Signed-off-by: Oleg Nesterov Acked-by: Roland McGrath Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/traps.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index c2e42cc65ce7..6e7ad63854c0 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include #include @@ -382,7 +382,7 @@ void __kprobes do_single_step(struct pt_regs *regs) SIGTRAP) == NOTIFY_STOP){ return; } - if ((current->ptrace & PT_PTRACED) != 0) + if (tracehook_consider_fatal_signal(current, SIGTRAP)) force_sig(SIGTRAP, current); } @@ -483,7 +483,7 @@ static void illegal_op(struct pt_regs * regs, long interruption_code) if (get_user(*((__u16 *) opcode), (__u16 __user *) location)) return; if (*((__u16 *) opcode) == S390_BREAKPOINT_U16) { - if (current->ptrace & PT_PTRACED) + if (tracehook_consider_fatal_signal(current, SIGTRAP)) force_sig(SIGTRAP, current); else signal = SIGILL; -- GitLab From 7883097f1602c8cbb1da764a6ac43e0b8a7f56d9 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Fri, 18 Dec 2009 17:43:25 +0100 Subject: [PATCH 442/618] [S390] qdio: remove superfluous log entries and WARN_ONs. * Don't write debug feature log entries for sl, slsb and sbal since these elements can be located from the qdio_q pointer which is also logged. * Convert WARN_ON for wrong alignment of sbal to BUG_ON. * Remove WARN_ON's for wrong alignment of q / qib / slib since these alignments should be guaranteed by kmem_cache_alloc alignment / struct aligned attribute / __get_free_page. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_setup.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c index 18d54fc21ce9..8c2dea5fa2b4 100644 --- a/drivers/s390/cio/qdio_setup.c +++ b/drivers/s390/cio/qdio_setup.c @@ -48,7 +48,6 @@ static void set_impl_params(struct qdio_irq *irq_ptr, if (!irq_ptr) return; - WARN_ON((unsigned long)&irq_ptr->qib & 0xff); irq_ptr->qib.pfmt = qib_param_field_format; if (qib_param_field) memcpy(irq_ptr->qib.parm, qib_param_field, @@ -82,14 +81,12 @@ static int __qdio_allocate_qs(struct qdio_q **irq_ptr_qs, int nr_queues) q = kmem_cache_alloc(qdio_q_cache, GFP_KERNEL); if (!q) return -ENOMEM; - WARN_ON((unsigned long)q & 0xff); q->slib = (struct slib *) __get_free_page(GFP_KERNEL); if (!q->slib) { kmem_cache_free(qdio_q_cache, q); return -ENOMEM; } - WARN_ON((unsigned long)q->slib & 0x7ff); irq_ptr_qs[i] = q; } return 0; @@ -131,7 +128,7 @@ static void setup_storage_lists(struct qdio_q *q, struct qdio_irq *irq_ptr, /* fill in sbal */ for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; j++) { q->sbal[j] = *sbals_array++; - WARN_ON((unsigned long)q->sbal[j] & 0xff); + BUG_ON((unsigned long)q->sbal[j] & 0xff); } /* fill in slib */ @@ -147,11 +144,6 @@ static void setup_storage_lists(struct qdio_q *q, struct qdio_irq *irq_ptr, /* fill in sl */ for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; j++) q->sl->element[j].sbal = (unsigned long)q->sbal[j]; - - DBF_EVENT("sl-slsb-sbal"); - DBF_HEX(q->sl, sizeof(void *)); - DBF_HEX(&q->slsb, sizeof(void *)); - DBF_HEX(q->sbal, sizeof(void *)); } static void setup_queues(struct qdio_irq *irq_ptr, -- GitLab From 8bcd9b04fdbab9cee4948501f8862af2a288f1b5 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Fri, 18 Dec 2009 17:43:26 +0100 Subject: [PATCH 443/618] [S390] qdio: add counter for input queue full condition Add a counter to the qdio performance statistics that indicates that no free buffers were left in the input queue. If the counter gets increased it means that the qdio adapter filled all available buffers and possibly had more buffers ready but could not transmit them. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_main.c | 3 ++- drivers/s390/cio/qdio_perf.c | 2 ++ drivers/s390/cio/qdio_perf.h | 1 + 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 4be6e84b9599..b2275c5000e7 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -486,7 +486,8 @@ static int get_inbound_buffer_frontier(struct qdio_q *q) case SLSB_P_INPUT_PRIMED: inbound_primed(q, count); q->first_to_check = add_buf(q->first_to_check, count); - atomic_sub(count, &q->nr_buf_used); + if (atomic_sub(count, &q->nr_buf_used) == 0) + qdio_perf_stat_inc(&perf_stats.inbound_queue_full); break; case SLSB_P_INPUT_ERROR: announce_buffer_error(q, count); diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c index 968e3c7c2632..54f7c325a3e6 100644 --- a/drivers/s390/cio/qdio_perf.c +++ b/drivers/s390/cio/qdio_perf.c @@ -64,6 +64,8 @@ static int qdio_perf_proc_show(struct seq_file *m, void *v) (long)atomic_long_read(&perf_stats.fast_requeue)); seq_printf(m, "Number of outbound target full condition\t: %li\n", (long)atomic_long_read(&perf_stats.outbound_target_full)); + seq_printf(m, "Number of inbound queue full condition\t\t: %li\n", + (long)atomic_long_read(&perf_stats.inbound_queue_full)); seq_printf(m, "Number of outbound tasklet mod_timer calls\t: %li\n", (long)atomic_long_read(&perf_stats.debug_tl_out_timer)); seq_printf(m, "Number of stop polling calls\t\t\t: %li\n", diff --git a/drivers/s390/cio/qdio_perf.h b/drivers/s390/cio/qdio_perf.h index ff4504ce1e3c..12454231dc8b 100644 --- a/drivers/s390/cio/qdio_perf.h +++ b/drivers/s390/cio/qdio_perf.h @@ -36,6 +36,7 @@ struct qdio_perf_stats { atomic_long_t outbound_handler; atomic_long_t fast_requeue; atomic_long_t outbound_target_full; + atomic_long_t inbound_queue_full; /* for debugging */ atomic_long_t debug_tl_out_timer; -- GitLab From 1d802e24774c94ec7bdb12b6515226f3341533c1 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 18 Dec 2009 17:43:27 +0100 Subject: [PATCH 444/618] [S390] Use strim instead of strstrip to avoid false warnings. Cc: Michael Holzheu Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/hypfs/hypfs_diag.c | 4 ++-- arch/s390/hypfs/hypfs_vm.c | 2 +- arch/s390/kernel/ipl.c | 6 +++--- drivers/s390/char/tape_3590.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c index 77df726180ba..2b92d501425f 100644 --- a/arch/s390/hypfs/hypfs_diag.c +++ b/arch/s390/hypfs/hypfs_diag.c @@ -164,7 +164,7 @@ static inline void part_hdr__part_name(enum diag204_format type, void *hdr, LPAR_NAME_LEN); EBCASC(name, LPAR_NAME_LEN); name[LPAR_NAME_LEN] = 0; - strstrip(name); + strim(name); } struct cpu_info { @@ -523,7 +523,7 @@ static int diag224_idx2name(int index, char *name) memcpy(name, diag224_cpu_names + ((index + 1) * CPU_NAME_LEN), CPU_NAME_LEN); name[CPU_NAME_LEN] = 0; - strstrip(name); + strim(name); return 0; } diff --git a/arch/s390/hypfs/hypfs_vm.c b/arch/s390/hypfs/hypfs_vm.c index d01fc8f799f0..f0b0d31f0b48 100644 --- a/arch/s390/hypfs/hypfs_vm.c +++ b/arch/s390/hypfs/hypfs_vm.c @@ -124,7 +124,7 @@ static int hpyfs_vm_create_guest(struct super_block *sb, /* guest dir */ memcpy(guest_name, data->guest_name, NAME_LEN); EBCASC(guest_name, NAME_LEN); - strstrip(guest_name); + strim(guest_name); guest_dir = hypfs_mkdir(sb, systems_dir, guest_name); if (IS_ERR(guest_dir)) return PTR_ERR(guest_dir); diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 4890ac6d7faa..4d73296fed74 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -221,7 +221,7 @@ static ssize_t sys_##_prefix##_##_name##_store(struct kobject *kobj, \ const char *buf, size_t len) \ { \ strncpy(_value, buf, sizeof(_value) - 1); \ - strstrip(_value); \ + strim(_value); \ return len; \ } \ static struct kobj_attribute sys_##_prefix##_##_name##_attr = \ @@ -472,7 +472,7 @@ static ssize_t ipl_ccw_loadparm_show(struct kobject *kobj, return sprintf(page, "#unknown#\n"); memcpy(loadparm, &sclp_ipl_info.loadparm, LOADPARM_LEN); EBCASC(loadparm, LOADPARM_LEN); - strstrip(loadparm); + strim(loadparm); return sprintf(page, "%s\n", loadparm); } @@ -776,7 +776,7 @@ static void reipl_get_ascii_loadparm(char *loadparm, memcpy(loadparm, ibp->ipl_info.ccw.load_parm, LOADPARM_LEN); EBCASC(loadparm, LOADPARM_LEN); loadparm[LOADPARM_LEN] = 0; - strstrip(loadparm); + strim(loadparm); } static ssize_t reipl_generic_loadparm_show(struct ipl_parameter_block *ipb, diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index b2eb94aab022..9821c5886613 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -137,7 +137,7 @@ static void int_to_ext_kekl(struct tape3592_kekl *in, out->type_on_tape = TAPE390_KEKL_TYPE_LABEL; memcpy(out->label, in->label, sizeof(in->label)); EBCASC(out->label, sizeof(in->label)); - strstrip(out->label); + strim(out->label); } static void int_to_ext_kekl_pair(struct tape3592_kekl_pair *in, -- GitLab From 9b0fd1149747b117e7c3e9917fdea03b774ae3d0 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 18 Dec 2009 13:02:38 -0500 Subject: [PATCH 445/618] watchdog: update geodewdt for new MFGPT API Update to the new cs5535_mfgpt* API. The geode-specific wording should eventually be dropped from this driver... Signed-off-by: Andres Salomon Signed-off-by: Linus Torvalds --- drivers/watchdog/Kconfig | 2 +- drivers/watchdog/geodewdt.c | 40 ++++++++++++++++++------------------- 2 files changed, 20 insertions(+), 22 deletions(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index da84fd03850f..088f32f29a6e 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -368,7 +368,7 @@ config ALIM7101_WDT config GEODE_WDT tristate "AMD Geode CS5535/CS5536 Watchdog" - depends on MGEODE_LX + depends on CS5535_MFGPT help This driver enables a watchdog capability built into the CS5535/CS5536 companion chips for the AMD Geode GX and LX diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index 9acf0015a1e7..38252ff828ca 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -1,6 +1,7 @@ -/* Watchdog timer for the Geode GX/LX with the CS5535/CS5536 companion chip +/* Watchdog timer for machines with the CS5535/CS5536 companion chip * * Copyright (C) 2006-2007, Advanced Micro Devices, Inc. + * Copyright (C) 2009 Andres Salomon * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -19,7 +20,7 @@ #include #include -#include +#include #define GEODEWDT_HZ 500 #define GEODEWDT_SCALE 6 @@ -46,25 +47,25 @@ MODULE_PARM_DESC(nowayout, static struct platform_device *geodewdt_platform_device; static unsigned long wdt_flags; -static int wdt_timer; +static struct cs5535_mfgpt_timer *wdt_timer; static int safe_close; static void geodewdt_ping(void) { /* Stop the counter */ - geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); /* Reset the counter */ - geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); /* Enable the counter */ - geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); } static void geodewdt_disable(void) { - geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); - geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); } static int geodewdt_set_heartbeat(int val) @@ -72,10 +73,10 @@ static int geodewdt_set_heartbeat(int val) if (val < 1 || val > GEODEWDT_MAX_SECONDS) return -EINVAL; - geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); - geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, val * GEODEWDT_HZ); - geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); - geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, val * GEODEWDT_HZ); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); timeout = val; return 0; @@ -215,28 +216,25 @@ static struct miscdevice geodewdt_miscdev = { static int __devinit geodewdt_probe(struct platform_device *dev) { - int ret, timer; - - timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); + int ret; - if (timer == -1) { + wdt_timer = cs5535_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); + if (!wdt_timer) { printk(KERN_ERR "geodewdt: No timers were available\n"); return -ENODEV; } - wdt_timer = timer; - /* Set up the timer */ - geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, GEODEWDT_SCALE | (3 << 8)); /* Set up comparator 2 to reset when the event fires */ - geode_mfgpt_toggle_event(wdt_timer, MFGPT_CMP2, MFGPT_EVENT_RESET, 1); + cs5535_mfgpt_toggle_event(wdt_timer, MFGPT_CMP2, MFGPT_EVENT_RESET, 1); /* Set up the initial timeout */ - geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, timeout * GEODEWDT_HZ); ret = misc_register(&geodewdt_miscdev); -- GitLab From d49464318a7c51676c44cbd1e2480f651cc43807 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 18 Dec 2009 20:25:30 +0100 Subject: [PATCH 446/618] ALSA: aaci - Fix a typo Fixed a typo of the max buffer size specified for buffer allocation changed in the commit d6797322231af98b9bb4afb175dd614cf511e5f7. Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 1497dce1b04a..ae38f2c342cc 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -1028,7 +1028,7 @@ static int __devinit aaci_init_pcm(struct aaci *aaci) snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &aaci_playback_ops); snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &aaci_capture_ops); snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, - NULL, 0, 64 * 104); + NULL, 0, 64 * 1024); } return ret; -- GitLab From 6ca867c827c84d21316e9dc4035abe9480f8347c Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Dec 2009 17:48:35 +0000 Subject: [PATCH 447/618] ALSA: AACI: simplify codec rate information There's no need for a specific rule; ALSA's generic AC'97 support calculates the necessary rate constraint information itself, and we can use this directly. Signed-off-by: Russell King Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 75 ++---------------------------------------------- 1 file changed, 3 insertions(+), 72 deletions(-) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index ae38f2c342cc..ea3be874c84f 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -330,63 +330,6 @@ static irqreturn_t aaci_irq(int irq, void *devid) /* * ALSA support. */ - -struct aaci_stream { - unsigned char codec_idx; - unsigned char rate_idx; -}; - -static struct aaci_stream aaci_streams[] = { - [ACSTREAM_FRONT] = { - .codec_idx = 0, - .rate_idx = AC97_RATES_FRONT_DAC, - }, - [ACSTREAM_SURROUND] = { - .codec_idx = 0, - .rate_idx = AC97_RATES_SURR_DAC, - }, - [ACSTREAM_LFE] = { - .codec_idx = 0, - .rate_idx = AC97_RATES_LFE_DAC, - }, -}; - -static inline unsigned int aaci_rate_mask(struct aaci *aaci, int streamid) -{ - struct aaci_stream *s = aaci_streams + streamid; - return aaci->ac97_bus->codec[s->codec_idx]->rates[s->rate_idx]; -} - -static unsigned int rate_list[] = { - 5512, 8000, 11025, 16000, 22050, 32000, 44100, - 48000, 64000, 88200, 96000, 176400, 192000 -}; - -/* - * Double-rate rule: we can support double rate iff channels == 2 - * (unimplemented) - */ -static int -aaci_rule_rate_by_channels(struct snd_pcm_hw_params *p, struct snd_pcm_hw_rule *rule) -{ - struct aaci *aaci = rule->private; - unsigned int rate_mask = SNDRV_PCM_RATE_8000_48000|SNDRV_PCM_RATE_5512; - struct snd_interval *c = hw_param_interval(p, SNDRV_PCM_HW_PARAM_CHANNELS); - - switch (c->max) { - case 6: - rate_mask &= aaci_rate_mask(aaci, ACSTREAM_LFE); - case 4: - rate_mask &= aaci_rate_mask(aaci, ACSTREAM_SURROUND); - case 2: - rate_mask &= aaci_rate_mask(aaci, ACSTREAM_FRONT); - } - - return snd_interval_list(hw_param_interval(p, rule->var), - ARRAY_SIZE(rate_list), rate_list, - rate_mask); -} - static struct snd_pcm_hardware aaci_hw_info = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | @@ -400,10 +343,7 @@ static struct snd_pcm_hardware aaci_hw_info = { */ .formats = SNDRV_PCM_FMTBIT_S16_LE, - /* should this be continuous or knot? */ - .rates = SNDRV_PCM_RATE_CONTINUOUS, - .rate_max = 48000, - .rate_min = 4000, + /* rates are setup from the AC'97 codec */ .channels_min = 2, .channels_max = 6, .buffer_bytes_max = 64 * 1024, @@ -423,6 +363,8 @@ static int __aaci_pcm_open(struct aaci *aaci, aacirun->substream = substream; runtime->private_data = aacirun; runtime->hw = aaci_hw_info; + runtime->hw.rates = aacirun->pcm->rates; + snd_pcm_limit_hw_rates(runtime); /* * FIXME: ALSA specifies fifo_size in bytes. If we're in normal @@ -433,17 +375,6 @@ static int __aaci_pcm_open(struct aaci *aaci, */ runtime->hw.fifo_size = aaci->fifosize * 2; - /* - * Add rule describing hardware rate dependency - * on the number of channels. - */ - ret = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, - aaci_rule_rate_by_channels, aaci, - SNDRV_PCM_HW_PARAM_CHANNELS, - SNDRV_PCM_HW_PARAM_RATE, -1); - if (ret) - goto out; - ret = request_irq(aaci->dev->irq[0], aaci_irq, IRQF_SHARED|IRQF_DISABLED, DRIVER_NAME, aaci); if (ret) -- GitLab From 4e30b69108b20eca80f1a323f969bf7629c7795f Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Dec 2009 17:48:37 +0000 Subject: [PATCH 448/618] ALSA: AACI: cleanup aaci_pcm_hw_params Since the recording and playback paths are now the same, eliminate the needless conditionals. Signed-off-by: Russell King Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index ea3be874c84f..2e28748a3d8d 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -438,18 +438,14 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); - if (err < 0) - goto out; - - err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), - params_channels(params), - aacirun->pcm->r[0].slots); - if (err) - goto out; + if (err >= 0) { + err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), + params_channels(params), + aacirun->pcm->r[0].slots); - aacirun->pcm_open = 1; + aacirun->pcm_open = err == 0; + } - out: return err; } @@ -458,7 +454,7 @@ static int aaci_pcm_prepare(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct aaci_runtime *aacirun = runtime->private_data; - aacirun->start = (void *)runtime->dma_area; + aacirun->start = runtime->dma_area; aacirun->end = aacirun->start + snd_pcm_lib_buffer_bytes(substream); aacirun->ptr = aacirun->start; aacirun->period = -- GitLab From d3aee7996c30f928bbbbfd0994148e35d2e83084 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Dec 2009 17:48:40 +0000 Subject: [PATCH 449/618] ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_params Signed-off-by: Russell King Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 2e28748a3d8d..b88bbded2f4f 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -444,6 +444,11 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, aacirun->pcm->r[0].slots); aacirun->pcm_open = err == 0; + aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; + aacirun->fifosz = aaci->fifosize * 4; + + if (aacirun->cr & CR_COMPACT) + aacirun->fifosz >>= 1; } return err; @@ -554,14 +559,9 @@ static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream, * Enable FIFO, compact mode, 16 bits per sample. * FIXME: double rate slots? */ - if (ret >= 0) { - aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; + if (ret >= 0) aacirun->cr |= channels_to_txmask[channels]; - aacirun->fifosz = aaci->fifosize * 4; - if (aacirun->cr & CR_COMPACT) - aacirun->fifosz >>= 1; - } return ret; } @@ -648,18 +648,10 @@ static int aaci_pcm_capture_hw_params(struct snd_pcm_substream *substream, int ret; ret = aaci_pcm_hw_params(substream, aacirun, params); - - if (ret >= 0) { - aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; - + if (ret >= 0) /* Line in record: slot 3 and 4 */ aacirun->cr |= CR_SL3 | CR_SL4; - aacirun->fifosz = aaci->fifosize * 4; - - if (aacirun->cr & CR_COMPACT) - aacirun->fifosz >>= 1; - } return ret; } -- GitLab From a08d56583f6b87e2981d1b6e9ee891bdc741cc44 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Dec 2009 17:48:45 +0000 Subject: [PATCH 450/618] ALSA: AACI: add double-rate support Signed-off-by: Russell King Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index b88bbded2f4f..b377370af2d7 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -366,6 +366,10 @@ static int __aaci_pcm_open(struct aaci *aaci, runtime->hw.rates = aacirun->pcm->rates; snd_pcm_limit_hw_rates(runtime); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && + aacirun->pcm->r[1].slots) + snd_ac97_pcm_double_rate_rules(runtime); + /* * FIXME: ALSA specifies fifo_size in bytes. If we're in normal * mode, each 32-bit word contains one sample. If we're in @@ -439,9 +443,12 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); if (err >= 0) { - err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), + unsigned int rate = params_rate(params); + int dbl = rate > 48000; + + err = snd_ac97_pcm_open(aacirun->pcm, rate, params_channels(params), - aacirun->pcm->r[0].slots); + aacirun->pcm->r[dbl].slots); aacirun->pcm_open = err == 0; aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; @@ -808,6 +815,12 @@ static struct ac97_pcm ac97_defs[] __devinitdata = { (1 << AC97_SLOT_PCM_SRIGHT) | (1 << AC97_SLOT_LFE), }, + [1] = { + .slots = (1 << AC97_SLOT_PCM_LEFT) | + (1 << AC97_SLOT_PCM_RIGHT) | + (1 << AC97_SLOT_PCM_LEFT_0) | + (1 << AC97_SLOT_PCM_RIGHT_0), + }, }, }, [1] = { /* PCM in */ -- GitLab From d6a89fefa50feda5516cd5210ad0008a44632b52 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Dec 2009 17:48:50 +0000 Subject: [PATCH 451/618] ALSA: AACI: switch to per-pcm locking We can use finer-grained locking, which makes things easier when we gain DMA support. Signed-off-by: Russell King Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 49 ++++++++++++++++++++++++++++-------------------- sound/arm/aaci.h | 2 +- 2 files changed, 30 insertions(+), 21 deletions(-) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index b377370af2d7..c5699863643b 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -172,14 +172,15 @@ static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg) return v; } -static inline void aaci_chan_wait_ready(struct aaci_runtime *aacirun) +static inline void +aaci_chan_wait_ready(struct aaci_runtime *aacirun, unsigned long mask) { u32 val; int timeout = 5000; do { val = readl(aacirun->base + AACI_SR); - } while (val & (SR_TXB|SR_RXB) && timeout--); + } while (val & mask && timeout--); } @@ -208,8 +209,10 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) writel(0, aacirun->base + AACI_IE); return; } - ptr = aacirun->ptr; + spin_lock(&aacirun->lock); + + ptr = aacirun->ptr; do { unsigned int len = aacirun->fifosz; u32 val; @@ -217,9 +220,9 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) if (aacirun->bytes <= 0) { aacirun->bytes += aacirun->period; aacirun->ptr = ptr; - spin_unlock(&aaci->lock); + spin_unlock(&aacirun->lock); snd_pcm_period_elapsed(aacirun->substream); - spin_lock(&aaci->lock); + spin_lock(&aacirun->lock); } if (!(aacirun->cr & CR_EN)) break; @@ -245,7 +248,10 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) ptr = aacirun->start; } } while(1); + aacirun->ptr = ptr; + + spin_unlock(&aacirun->lock); } if (mask & ISR_URINTR) { @@ -263,6 +269,8 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) return; } + spin_lock(&aacirun->lock); + ptr = aacirun->ptr; do { unsigned int len = aacirun->fifosz; @@ -271,9 +279,9 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) if (aacirun->bytes <= 0) { aacirun->bytes += aacirun->period; aacirun->ptr = ptr; - spin_unlock(&aaci->lock); + spin_unlock(&aacirun->lock); snd_pcm_period_elapsed(aacirun->substream); - spin_lock(&aaci->lock); + spin_lock(&aacirun->lock); } if (!(aacirun->cr & CR_EN)) break; @@ -301,6 +309,8 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) } while (1); aacirun->ptr = ptr; + + spin_unlock(&aacirun->lock); } } @@ -310,7 +320,6 @@ static irqreturn_t aaci_irq(int irq, void *devid) u32 mask; int i; - spin_lock(&aaci->lock); mask = readl(aaci->base + AACI_ALLINTS); if (mask) { u32 m = mask; @@ -320,7 +329,6 @@ static irqreturn_t aaci_irq(int irq, void *devid) } } } - spin_unlock(&aaci->lock); return mask ? IRQ_HANDLED : IRQ_NONE; } @@ -580,7 +588,7 @@ static void aaci_pcm_playback_stop(struct aaci_runtime *aacirun) ie &= ~(IE_URIE|IE_TXIE); writel(ie, aacirun->base + AACI_IE); aacirun->cr &= ~CR_EN; - aaci_chan_wait_ready(aacirun); + aaci_chan_wait_ready(aacirun, SR_TXB); writel(aacirun->cr, aacirun->base + AACI_TXCR); } @@ -588,7 +596,7 @@ static void aaci_pcm_playback_start(struct aaci_runtime *aacirun) { u32 ie; - aaci_chan_wait_ready(aacirun); + aaci_chan_wait_ready(aacirun, SR_TXB); aacirun->cr |= CR_EN; ie = readl(aacirun->base + AACI_IE); @@ -599,12 +607,12 @@ static void aaci_pcm_playback_start(struct aaci_runtime *aacirun) static int aaci_pcm_playback_trigger(struct snd_pcm_substream *substream, int cmd) { - struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; unsigned long flags; int ret = 0; - spin_lock_irqsave(&aaci->lock, flags); + spin_lock_irqsave(&aacirun->lock, flags); + switch (cmd) { case SNDRV_PCM_TRIGGER_START: aaci_pcm_playback_start(aacirun); @@ -631,7 +639,8 @@ static int aaci_pcm_playback_trigger(struct snd_pcm_substream *substream, int cm default: ret = -EINVAL; } - spin_unlock_irqrestore(&aaci->lock, flags); + + spin_unlock_irqrestore(&aacirun->lock, flags); return ret; } @@ -666,7 +675,7 @@ static void aaci_pcm_capture_stop(struct aaci_runtime *aacirun) { u32 ie; - aaci_chan_wait_ready(aacirun); + aaci_chan_wait_ready(aacirun, SR_RXB); ie = readl(aacirun->base + AACI_IE); ie &= ~(IE_ORIE | IE_RXIE); @@ -681,7 +690,7 @@ static void aaci_pcm_capture_start(struct aaci_runtime *aacirun) { u32 ie; - aaci_chan_wait_ready(aacirun); + aaci_chan_wait_ready(aacirun, SR_RXB); #ifdef DEBUG /* RX Timeout value: bits 28:17 in RXCR */ @@ -698,12 +707,11 @@ static void aaci_pcm_capture_start(struct aaci_runtime *aacirun) static int aaci_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd) { - struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; unsigned long flags; int ret = 0; - spin_lock_irqsave(&aaci->lock, flags); + spin_lock_irqsave(&aacirun->lock, flags); switch (cmd) { case SNDRV_PCM_TRIGGER_START: @@ -732,7 +740,7 @@ static int aaci_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd ret = -EINVAL; } - spin_unlock_irqrestore(&aaci->lock, flags); + spin_unlock_irqrestore(&aacirun->lock, flags); return ret; } @@ -933,7 +941,6 @@ static struct aaci * __devinit aaci_init_card(struct amba_device *dev) aaci = card->private_data; mutex_init(&aaci->ac97_sem); - spin_lock_init(&aaci->lock); aaci->card = card; aaci->dev = dev; @@ -1020,12 +1027,14 @@ static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id) /* * Playback uses AACI channel 0 */ + spin_lock_init(&aaci->playback.lock); aaci->playback.base = aaci->base + AACI_CSCH1; aaci->playback.fifo = aaci->base + AACI_DR1; /* * Capture uses AACI channel 0 */ + spin_lock_init(&aaci->capture.lock); aaci->capture.base = aaci->base + AACI_CSCH1; aaci->capture.fifo = aaci->base + AACI_DR1; diff --git a/sound/arm/aaci.h b/sound/arm/aaci.h index 924f69c1c44c..6a4a2eebdda1 100644 --- a/sound/arm/aaci.h +++ b/sound/arm/aaci.h @@ -202,6 +202,7 @@ struct aaci_runtime { void __iomem *base; void __iomem *fifo; + spinlock_t lock; struct ac97_pcm *pcm; int pcm_open; @@ -232,7 +233,6 @@ struct aaci { struct snd_ac97 *ac97; u32 maincr; - spinlock_t lock; struct aaci_runtime playback; struct aaci_runtime capture; -- GitLab From c7d260afcbc0f9f4074e74796d4e3646875c08e1 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Fri, 18 Dec 2009 10:24:54 +0800 Subject: [PATCH 452/618] ocfs2: Add reflinked file's inode to inode hash eariler. We used to add reflinked file's inode to inode hash when we add it to the dest dir. But actually there is a race. Consider the following sequence. 1. reflink happens and create the inode in orphan dir. 2. reflink thread is scheduled out because of some io. 3. recovery begins to work and calls ocfs2_recover_orphans. It calls ocfs2_iget and get a new inode and i_count = 1. It calls iput then and delete inode. the buffer's uptodate state is cleared. This patch move insert_inode_hash to the create function so that it can be found by step 3 and prevented from deleting because i_count > 1. This resolves the bug http://oss.oracle.com/bugzilla/show_bug.cgi?id=1183. Signed-off-by: Tao Ma Signed-off-by: Joel Becker --- fs/ocfs2/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index f010b22b1c44..5ac4d52e090f 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -2136,6 +2136,7 @@ int ocfs2_create_inode_in_orphan(struct inode *dir, if (status < 0) mlog_errno(status); + insert_inode_hash(inode); leave: if (status < 0 && did_quota_inode) vfs_dq_free_inode(inode); @@ -2284,7 +2285,6 @@ int ocfs2_mv_orphaned_inode_to_new(struct inode *dir, goto out_commit; } - insert_inode_hash(inode); dentry->d_op = &ocfs2_dentry_ops; d_instantiate(dentry, inode); status = 0; -- GitLab From 10cf1a02f444fdcd50be47cce3fa8bf08251dd9c Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Fri, 18 Dec 2009 10:24:55 +0800 Subject: [PATCH 453/618] ocfs2: Set i_nlink properly during reflink. We create a file in orphan dir for reflink so that if there is any error, we don't create any wrong dentry in the dir. But actually the file in orphan dir should be i_nlink = 0 so that it can be replayed and freed successfully. This patch first set i_nlink to 0 when creating the file in orphan dir and then set it to 1(reflink now only works for regular file) when we move it to the dest dir. Signed-off-by: Tao Ma Signed-off-by: Joel Becker --- fs/ocfs2/namei.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 5ac4d52e090f..3e9b46002f22 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -2108,6 +2108,7 @@ int ocfs2_create_inode_in_orphan(struct inode *dir, } did_quota_inode = 1; + inode->i_nlink = 0; /* do the real work now. */ status = ocfs2_mknod_locked(osb, dir, inode, 0, &new_di_bh, parent_di_bh, handle, @@ -2268,6 +2269,8 @@ int ocfs2_mv_orphaned_inode_to_new(struct inode *dir, di = (struct ocfs2_dinode *)di_bh->b_data; le32_add_cpu(&di->i_flags, -OCFS2_ORPHANED_FL); di->i_orphaned_slot = 0; + inode->i_nlink = 1; + ocfs2_set_links_count(di, inode->i_nlink); ocfs2_journal_dirty(handle, di_bh); status = ocfs2_add_entry(handle, dentry, inode, -- GitLab From 9c69fabe789b0eb468a0c7031ae7bb850760aea8 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 18 Dec 2009 20:11:03 -0800 Subject: [PATCH 454/618] netns: fix net.ipv6.route.gc_min_interval_ms in netns sysctl table was copied, all right, but ->data for net.ipv6.route.gc_min_interval_ms was not reinitialized for "!= &init_net" case. In init_net everthing works by accident due to correct ->data initialization in source table. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- net/ipv6/route.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index db3b27303890..c2bd74c5f8d9 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2630,6 +2630,7 @@ struct ctl_table *ipv6_route_sysctl_init(struct net *net) table[6].data = &net->ipv6.sysctl.ip6_rt_gc_elasticity; table[7].data = &net->ipv6.sysctl.ip6_rt_mtu_expires; table[8].data = &net->ipv6.sysctl.ip6_rt_min_advmss; + table[9].data = &net->ipv6.sysctl.ip6_rt_gc_min_interval; } return table; -- GitLab From afdafff130142ef4d6478dcff6d9e879394fd348 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 18 Dec 2009 20:13:35 -0800 Subject: [PATCH 455/618] netxen: use module parameter correctly Netxen driver is doing this bogus thing to create a control file. This fails if device doesn't exist, and overall is a bad way to do the module parameter. Rather than fix borked code, just rewrite. Just using a writeable module parameter of 0/1 is the correct way Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_main.c | 57 ++-------------------------- 1 file changed, 3 insertions(+), 54 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index f4996846a234..6cae26a5bd67 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -57,7 +57,9 @@ static int use_msi = 1; static int use_msi_x = 1; -static unsigned long auto_fw_reset = AUTO_FW_RESET_ENABLED; +static int auto_fw_reset = AUTO_FW_RESET_ENABLED; +module_param(auto_fw_reset, int, 0644); +MODULE_PARM_DESC(auto_fw_reset,"Auto firmware reset (0=disabled, 1=enabled"); static int __devinit netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent); @@ -2534,42 +2536,6 @@ static struct bin_attribute bin_attr_mem = { .write = netxen_sysfs_write_mem, }; -#ifdef CONFIG_MODULES -static ssize_t -netxen_store_auto_fw_reset(struct module_attribute *mattr, - struct module *mod, const char *buf, size_t count) - -{ - unsigned long new; - - if (strict_strtoul(buf, 16, &new)) - return -EINVAL; - - if ((new == AUTO_FW_RESET_ENABLED) || (new == AUTO_FW_RESET_DISABLED)) { - auto_fw_reset = new; - return count; - } - - return -EINVAL; -} - -static ssize_t -netxen_show_auto_fw_reset(struct module_attribute *mattr, - struct module *mod, char *buf) - -{ - if (auto_fw_reset == AUTO_FW_RESET_ENABLED) - return sprintf(buf, "enabled\n"); - else - return sprintf(buf, "disabled\n"); -} - -static struct module_attribute mod_attr_fw_reset = { - .attr = {.name = "auto_fw_reset", .mode = (S_IRUGO | S_IWUSR)}, - .show = netxen_show_auto_fw_reset, - .store = netxen_store_auto_fw_reset, -}; -#endif static void netxen_create_sysfs_entries(struct netxen_adapter *adapter) @@ -2775,23 +2741,12 @@ static struct pci_driver netxen_driver = { static int __init netxen_init_module(void) { -#ifdef CONFIG_MODULES - struct module *mod = THIS_MODULE; -#endif - printk(KERN_INFO "%s\n", netxen_nic_driver_string); #ifdef CONFIG_INET register_netdevice_notifier(&netxen_netdev_cb); register_inetaddr_notifier(&netxen_inetaddr_cb); #endif - -#ifdef CONFIG_MODULES - if (sysfs_create_file(&mod->mkobj.kobj, &mod_attr_fw_reset.attr)) - printk(KERN_ERR "%s: Failed to create auto_fw_reset " - "sysfs entry.", netxen_nic_driver_name); -#endif - return pci_register_driver(&netxen_driver); } @@ -2799,12 +2754,6 @@ module_init(netxen_init_module); static void __exit netxen_exit_module(void) { -#ifdef CONFIG_MODULES - struct module *mod = THIS_MODULE; - - sysfs_remove_file(&mod->mkobj.kobj, &mod_attr_fw_reset.attr); -#endif - pci_unregister_driver(&netxen_driver); #ifdef CONFIG_INET -- GitLab From db94ce90d3d571c11637a912cc39cfb80df3879c Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 18 Dec 2009 20:14:59 -0800 Subject: [PATCH 456/618] e1000e: LED settings in EEPROM ignored on 82571 and 82572 Do not override the customizable LED configuration set in the EEPROM. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/82571.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index c1a42cfc80ba..b979464091bb 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1290,7 +1290,6 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw) static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw) { u32 ctrl; - u32 led_ctrl; s32 ret_val; ctrl = er32(CTRL); @@ -1305,11 +1304,6 @@ static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw) break; case e1000_phy_igp_2: ret_val = e1000e_copper_link_setup_igp(hw); - /* Setup activity LED */ - led_ctrl = er32(LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - ew32(LEDCTL, led_ctrl); break; default: return -E1000_ERR_PHY; -- GitLab From 5ee6f6a17cfde9c3141e4d57cf88b5cdf638b463 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 18 Dec 2009 20:16:10 -0800 Subject: [PATCH 457/618] broadcom: bcm54xx_shadow_read() errors ignored in bcm54xx_adjust_rxrefclk() If not signed read errors are ignored. Signed-off-by: Roel Kluin Acked-by: Matt Carlson Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index f63c96a4ecb4..c13cf64095b6 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -326,7 +326,8 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev) static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) { - u32 val, orig; + u32 orig; + int val; bool clk125en = true; /* Abort if we are using an untested phy. */ -- GitLab From 70abc8cb90e679d8519721e2761d8366a18212a6 Mon Sep 17 00:00:00 2001 From: Roger Oksanen Date: Fri, 18 Dec 2009 20:18:21 -0800 Subject: [PATCH 458/618] e100: Fix broken cbs accounting due to missing memset. Alan Stern noticed that e100 caused slab corruption. commit 98468efddb101f8a29af974101c17ba513b07be1 changed the allocation of cbs to use dma pools that don't return zeroed memory, especially the cb->status field used to track which cb to clean, causing (the visible) double freeing of skbs and a wrong free cbs count. Now the cbs are explicitly zeroed at allocation time. Reported-by: Alan Stern Tested-by: Alan Stern Signed-off-by: Roger Oksanen Acked-by: Jesse Brandeburg Signed-off-by: David S. Miller --- drivers/net/e100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 929701ca07d3..839fb2b136d3 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1829,6 +1829,7 @@ static int e100_alloc_cbs(struct nic *nic) &nic->cbs_dma_addr); if (!nic->cbs) return -ENOMEM; + memset(nic->cbs, 0, count * sizeof(struct cb)); for (cb = nic->cbs, i = 0; i < count; cb++, i++) { cb->next = (i + 1 < count) ? cb + 1 : nic->cbs; @@ -1837,7 +1838,6 @@ static int e100_alloc_cbs(struct nic *nic) cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb); cb->link = cpu_to_le32(nic->cbs_dma_addr + ((i+1) % count) * sizeof(struct cb)); - cb->skb = NULL; } nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs; -- GitLab From f9c4171e01f6befdf5d15346070b819d341c9c73 Mon Sep 17 00:00:00 2001 From: Nageswari Srinivasan Date: Fri, 18 Dec 2009 20:21:21 -0800 Subject: [PATCH 459/618] TI DaVinci EMAC: Fix MDIO bus frequency configuration There was a typo in "if condition" checking for validity of MDIO bus frequency passed as part of platform data. Bitwise AND was being used instead of a Logical AND. Tested on: DM6467 EVM Signed-off-by: Nageswari Srinivasan Acked-by: Anant Gole Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 8edac8915ea8..34e03104c3c1 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2272,7 +2272,7 @@ static int emac_mii_reset(struct mii_bus *bus) unsigned int clk_div; int mdio_bus_freq = emac_bus_frequency; - if (mdio_max_freq & mdio_bus_freq) + if (mdio_max_freq && mdio_bus_freq) clk_div = ((mdio_bus_freq / mdio_max_freq) - 1); else clk_div = 0xFF; -- GitLab From 3705e11a21bcdffe7422ee7870e1b23fe4ac70f4 Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Fri, 18 Dec 2009 20:25:13 -0800 Subject: [PATCH 460/618] ipv6: fix an oops when force unload ipv6 module When I do an ipv6 module force unload,I got the following oops: #rmmod -f ipv6 ------------[ cut here ]------------ kernel BUG at mm/slub.c:2969! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:11.0/0000:02:03.0/net/eth2/ifindex Modules linked in: ipv6(-) dm_multipath uinput ppdev tpm_tis tpm tpm_bios pcspkr pcnet32 mii parport_pc i2c_piix4 parport i2c_core floppy mptspi mptscsih mptbase scsi_transport_spi Pid: 2530, comm: rmmod Tainted: G R 2.6.32 #2 440BX Desktop Reference Platform/VMware Virtual Platform EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at kfree+0x6a/0xdd EAX: 00000000 EBX: c09e86bc ECX: c043e4dd EDX: c14293e0 ESI: e141f1d8 EDI: e140fc31 EBP: dec58ef0 ESP: dec58ed0 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process rmmod (pid: 2530, ti=dec58000 task=decb1940 task.ti=dec58000) Stack: c14293e0 00000282 df624240 c0897d08 c09e86bc c09e86bc e141f1d8 dec58f1c <0> dec58f00 e140fc31 c09e84c4 e141f1bc dec58f14 c0689d21 dec58f1c e141f1bc <0> 00000000 dec58f2c c0689eff c09e84d8 c09e84d8 e141f1bc bff33a90 dec58f38 Call Trace: [] ? ipv6_frags_exit_net+0x22/0x32 [ipv6] [] ? ops_exit_list+0x19/0x3d [] ? unregister_pernet_operations+0x2a/0x51 [] ? unregister_pernet_subsys+0x17/0x24 [] ? ipv6_frag_exit+0x21/0x32 [ipv6] [] ? inet6_exit+0x47/0x122 [ipv6] [] ? sys_delete_module+0x198/0x1f6 [] ? remove_vma+0x57/0x5d [] ? do_page_fault+0x2e7/0x315 [] ? sysenter_do_call+0x12/0x28 Code: 86 00 00 00 40 c1 e8 0c c1 e0 05 01 d0 89 45 e0 66 83 38 00 79 06 8b 40 0c 89 45 e0 8b 55 e0 8b 02 84 c0 78 14 66 a9 00 c0 75 04 <0f> 0b eb fe 8b 45 e0 e8 35 15 fe ff eb 5d 8b 45 04 8b 55 e0 89 EIP: [] kfree+0x6a/0xdd SS:ESP 0068:dec58ed0 ---[ end trace 4475d1a5b0afa7e5 ]--- It's because in ip6_frags_ns_sysctl_register, "table" only alloced when "net" is not equals to "init_net".So when we free "table" in ip6_frags_ns_sysctl_unregister,we should check this first. This patch fix the problem. Signed-off-by: Yang Hongyang Signed-off-by: David S. Miller --- net/ipv6/reassembly.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index 3b3a95607125..2cddea3bd6be 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -708,7 +708,8 @@ static void ip6_frags_ns_sysctl_unregister(struct net *net) table = net->ipv6.sysctl.frags_hdr->ctl_table_arg; unregister_net_sysctl_table(net->ipv6.sysctl.frags_hdr); - kfree(table); + if (!net_eq(net, &init_net)) + kfree(table); } static struct ctl_table_header *ip6_ctl_header; -- GitLab From 4529819c45161e4a119134f56ef504e69420bc98 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 18 Dec 2009 20:29:04 -0800 Subject: [PATCH 461/618] bnx2: reset_task is crashing the kernel. Fixing it. If bnx2 schedules a reset via the reset_task, e.g., due to a TX timeout, it's possible for the NIC to be disabled with packets pending for transmit. In this case, napi_disable will loop forever, eventually crashing the kernel. This patch moves the disable of the device to after the napi_disable call. Signed-off-by: Breno Leitao Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 4bfc80812926..c3e2b279fca0 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -653,7 +653,6 @@ static void bnx2_netif_stop(struct bnx2 *bp) { bnx2_cnic_stop(bp); - bnx2_disable_int_sync(bp); if (netif_running(bp->dev)) { bnx2_napi_disable(bp); netif_tx_disable(bp->dev); @@ -672,6 +671,7 @@ bnx2_netif_start(struct bnx2 *bp) bnx2_cnic_start(bp); } } + bnx2_disable_int_sync(bp); } static void -- GitLab From 01a1e7ec6c3769dc7c5fde23ebc253c6be5f68eb Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Fri, 18 Dec 2009 20:30:11 -0800 Subject: [PATCH 462/618] mISDN: use DECLARE_COMPLETION_ONSTACK for non-constant completion The _ONSTACK variant should be used for on-stack completion, otherwise it will break lockdep. Signed-off-by: Yong Zhang Acked-by: Karsten Keil Signed-off-by: David S. Miller --- drivers/isdn/mISDN/l1oip_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c index 7e5f30dbc0a0..f1e8af54dff0 100644 --- a/drivers/isdn/mISDN/l1oip_core.c +++ b/drivers/isdn/mISDN/l1oip_core.c @@ -661,7 +661,7 @@ l1oip_socket_thread(void *data) size_t recvbuf_size = 1500; int recvlen; struct socket *socket = NULL; - DECLARE_COMPLETION(wait); + DECLARE_COMPLETION_ONSTACK(wait); /* allocate buffer memory */ recvbuf = kmalloc(recvbuf_size, GFP_KERNEL); -- GitLab From 4773a47d8a564633cd80b94df397e91e946893e2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 18 Dec 2009 20:31:56 -0800 Subject: [PATCH 463/618] can/at91: don't check platform_get_irq's return value against zero MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Better use (int)irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/at91_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index d0ec17878ffc..166cc7e579c0 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -1037,7 +1037,7 @@ static int __init at91_can_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!res || !irq) { + if (!res || irq <= 0) { err = -ENODEV; goto exit_put; } -- GitLab From e6bf95ffa8d6f8f4b7ee33ea01490d95b0bbeb6e Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 18 Dec 2009 20:35:34 -0800 Subject: [PATCH 464/618] bnx2: fixing a timout error due not refreshing TX timers correctly When running the following script on an active bnx2 interface: while(true); do ifconfig ethX mtu 9000; ifconfig ethX mtu 1500; done A timeout error appears and dumps the following stack: NETDEV WATCHDOG: eth4 (bnx2): transmit queue 0 timed out ------------[ cut here ]------------ Badness at net/sched/sch_generic.c:261 This patch just fixes the way that ->trans_start is refreshed. Signed-off-by: Breno Leitao Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index c3e2b279fca0..f38764ec02c3 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -654,9 +654,17 @@ bnx2_netif_stop(struct bnx2 *bp) { bnx2_cnic_stop(bp); if (netif_running(bp->dev)) { + int i; + bnx2_napi_disable(bp); netif_tx_disable(bp->dev); - bp->dev->trans_start = jiffies; /* prevent tx timeout */ + /* prevent tx timeout */ + for (i = 0; i < bp->dev->num_tx_queues; i++) { + struct netdev_queue *txq; + + txq = netdev_get_tx_queue(bp->dev, i); + txq->trans_start = jiffies; + } } } -- GitLab From 1ccb8389f26f2d513b06abe45d8e0b8f32458302 Mon Sep 17 00:00:00 2001 From: Sandeep Gopalpet Date: Wed, 16 Dec 2009 01:14:58 +0000 Subject: [PATCH 465/618] gianfar: Fix a filer bug We need to enable filer whenever we need to use multiple RX queues. Also, need to program RIR0 register with the required distribution we require, if using RX filer hashing support for packet distribution to multiple queues. Signed-off-by: Sandeep Gopalpet Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 8 +++++++- drivers/net/gianfar.h | 4 ++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 6850dc0a7b91..1616531a71f7 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -357,8 +357,11 @@ static void gfar_init_mac(struct net_device *ndev) /* Configure the coalescing support */ gfar_configure_coalescing(priv, 0xFF, 0xFF); - if (priv->rx_filer_enable) + if (priv->rx_filer_enable) { rctrl |= RCTRL_FILREN; + /* Program the RIR0 reg with the required distribution */ + gfar_write(®s->rir0, DEFAULT_RIR0); + } if (priv->rx_csum_enable) rctrl |= RCTRL_CHECKSUMMING; @@ -1022,6 +1025,9 @@ static int gfar_probe(struct of_device *ofdev, priv->rx_queue[i]->rxic = DEFAULT_RXIC; } + /* enable filer if using multiple RX queues*/ + if(priv->num_rx_queues > 1) + priv->rx_filer_enable = 1; /* Enable most messages by default */ priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1; diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index cbb451011cb5..68d16dc6e7c8 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -401,6 +401,10 @@ extern const char gfar_driver_version[]; #define FPR_FILER_MASK 0xFFFFFFFF #define MAX_FILER_IDX 0xFF +/* This default RIR value directly corresponds + * to the 3-bit hash value generated */ +#define DEFAULT_RIR0 0x05397700 + /* RQFCR register bits */ #define RQFCR_GPI 0x80000000 #define RQFCR_HASHTBL_Q 0x00000000 -- GitLab From a7f38041b8c38d0721b042c123bd5d6bd2d21feb Mon Sep 17 00:00:00 2001 From: Sandeep Gopalpet Date: Wed, 16 Dec 2009 01:15:07 +0000 Subject: [PATCH 466/618] gianfar: Fix stats support This patch updates the per rx/tx queue stats. To update the per rx queue stats a new structure has been introduced rx_q_stats. The per tx queue stats are updated via the netdev_queue structure itself. Note that we update only the tx_packtes, tx_bytes, rx_packets, rx_bytes and rx_dropped stats on a per queue basis. Signed-off-by: Sandeep Gopalpet Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 42 ++++++++++++++++++++++++++++++++++++------ drivers/net/gianfar.h | 10 ++++++++++ 2 files changed, 46 insertions(+), 6 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 1616531a71f7..e0620d084644 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -417,6 +417,36 @@ static void gfar_init_mac(struct net_device *ndev) gfar_write(®s->fifo_tx_starve_shutoff, priv->fifo_starve_off); } +static struct net_device_stats *gfar_get_stats(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + struct netdev_queue *txq; + unsigned long rx_packets = 0, rx_bytes = 0, rx_dropped = 0; + unsigned long tx_packets = 0, tx_bytes = 0; + int i = 0; + + for (i = 0; i < priv->num_rx_queues; i++) { + rx_packets += priv->rx_queue[i]->stats.rx_packets; + rx_bytes += priv->rx_queue[i]->stats.rx_bytes; + rx_dropped += priv->rx_queue[i]->stats.rx_dropped; + } + + dev->stats.rx_packets = rx_packets; + dev->stats.rx_bytes = rx_bytes; + dev->stats.rx_dropped = rx_dropped; + + for (i = 0; i < priv->num_tx_queues; i++) { + txq = netdev_get_tx_queue(dev, i); + tx_bytes += txq->tx_bytes; + tx_packets += txq->tx_packets; + } + + dev->stats.tx_bytes = tx_bytes; + dev->stats.tx_packets = tx_packets; + + return &dev->stats; +} + static const struct net_device_ops gfar_netdev_ops = { .ndo_open = gfar_enet_open, .ndo_start_xmit = gfar_start_xmit, @@ -426,6 +456,7 @@ static const struct net_device_ops gfar_netdev_ops = { .ndo_tx_timeout = gfar_timeout, .ndo_do_ioctl = gfar_ioctl, .ndo_select_queue = gfar_select_queue, + .ndo_get_stats = gfar_get_stats, .ndo_vlan_rx_register = gfar_vlan_rx_register, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, @@ -1943,7 +1974,8 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) } /* Update transmit stats */ - dev->stats.tx_bytes += skb->len; + txq->tx_bytes += skb->len; + txq->tx_packets ++; txbdp = txbdp_start = tx_queue->cur_tx; @@ -2301,8 +2333,6 @@ static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue) tx_queue->skb_dirtytx = skb_dirtytx; tx_queue->dirty_tx = bdp; - dev->stats.tx_packets += howmany; - return howmany; } @@ -2516,14 +2546,14 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) } } else { /* Increment the number of packets */ - dev->stats.rx_packets++; + rx_queue->stats.rx_packets++; howmany++; if (likely(skb)) { pkt_len = bdp->length - ETH_FCS_LEN; /* Remove the FCS from the packet length */ skb_put(skb, pkt_len); - dev->stats.rx_bytes += pkt_len; + rx_queue->stats.rx_bytes += pkt_len; gfar_process_frame(dev, skb, amount_pull); @@ -2531,7 +2561,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) if (netif_msg_rx_err(priv)) printk(KERN_WARNING "%s: Missing skb!\n", dev->name); - dev->stats.rx_dropped++; + rx_queue->stats.rx_dropped++; priv->extra_stats.rx_skbmissing++; } diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 68d16dc6e7c8..4943cbe642ab 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -940,6 +940,15 @@ struct gfar_priv_tx_q { unsigned short txtime; }; +/* + * Per RX queue stats + */ +struct rx_q_stats { + unsigned long rx_packets; + unsigned long rx_bytes; + unsigned long rx_dropped; +}; + /** * struct gfar_priv_rx_q - per rx queue structure * @rxlock: per queue rx spin lock @@ -962,6 +971,7 @@ struct gfar_priv_rx_q { struct rxbd8 *cur_rx; struct net_device *dev; struct gfar_priv_grp *grp; + struct rx_q_stats stats; u16 skb_currx; u16 qindex; unsigned int rx_ring_size; -- GitLab From 7c65ec7958f4f301d5d2ff50476a21e7735c73e8 Mon Sep 17 00:00:00 2001 From: Sandeep Gopalpet Date: Wed, 16 Dec 2009 01:15:17 +0000 Subject: [PATCH 467/618] gianfar: Fix bit definitions of IMASK_GRSC and IMASK_GTSC Signed-off-by: Sandeep Gopalpet Signed-off-by: David S. Miller --- drivers/net/gianfar.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 4943cbe642ab..3d72dc43dca5 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -333,7 +333,7 @@ extern const char gfar_driver_version[]; #define IMASK_BSY 0x20000000 #define IMASK_EBERR 0x10000000 #define IMASK_MSRO 0x04000000 -#define IMASK_GRSC 0x02000000 +#define IMASK_GTSC 0x02000000 #define IMASK_BABT 0x01000000 #define IMASK_TXC 0x00800000 #define IMASK_TXEEN 0x00400000 @@ -344,7 +344,7 @@ extern const char gfar_driver_version[]; #define IMASK_XFUN 0x00010000 #define IMASK_RXB0 0x00008000 #define IMASK_MAG 0x00000800 -#define IMASK_GTSC 0x00000100 +#define IMASK_GRSC 0x00000100 #define IMASK_RXFEN0 0x00000080 #define IMASK_FIR 0x00000008 #define IMASK_FIQ 0x00000004 -- GitLab From ef86f581f7e8b29cb58d7f4e892e1a91b3805124 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 19 Dec 2009 08:18:03 +0100 Subject: [PATCH 468/618] ALSA: Use kzalloc for allocating only one thing Use kzalloc rather than kcalloc(1,...) The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ @@ - kcalloc(1, + kzalloc( ...) // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/isa/msnd/msnd_midi.c | 2 +- sound/pci/hda/patch_realtek.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/isa/msnd/msnd_midi.c b/sound/isa/msnd/msnd_midi.c index cb9aa4c4edd0..4be562b2cf21 100644 --- a/sound/isa/msnd/msnd_midi.c +++ b/sound/isa/msnd/msnd_midi.c @@ -162,7 +162,7 @@ int snd_msndmidi_new(struct snd_card *card, int device) err = snd_rawmidi_new(card, "MSND-MIDI", device, 1, 1, &rmidi); if (err < 0) return err; - mpu = kcalloc(1, sizeof(*mpu), GFP_KERNEL); + mpu = kzalloc(sizeof(*mpu), GFP_KERNEL); if (mpu == NULL) { snd_device_free(card, rmidi); return -ENOMEM; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index aeed4cc5aa79..20c1828e4bac 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12857,7 +12857,7 @@ static int patch_alc268(struct hda_codec *codec) int board_config; int i, has_beep, err; - spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); + spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; -- GitLab From 6f5d51148921c242680a7a1d9913384a30ab3cbe Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 19 Dec 2009 15:59:45 +0000 Subject: [PATCH 469/618] fix braindamage in audit_tree.c untag_chunk() ... aka "Al had badly fscked up when writing that thing and nobody noticed until Eric had fixed leaks that used to mask the breakage". The function essentially creates a copy of old array sans one element and replaces the references to elements of original (they are on cyclic lists) with those to corresponding elements of new one. After that the old one is fair game for freeing. First of all, there's a dumb braino: when we get to list_replace_init we use indices for wrong arrays - position in new one with the old array and vice versa. Another bug is more subtle - termination condition is wrong if the element to be excluded happens to be the last one. We shouldn't go until we fill the new array, we should go until we'd finished the old one. Otherwise the element we are trying to kill will remain on the cyclic lists... That crap used to be masked by several leaks, so it was not quite trivial to hit. Eric had fixed some of those leaks a while ago and the shit had hit the fan... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- kernel/audit_tree.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index 2451dc6f3282..b36aa9651ba2 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -277,7 +277,7 @@ static void untag_chunk(struct node *p) owner->root = NULL; } - for (i = j = 0; i < size; i++, j++) { + for (i = j = 0; j <= size; i++, j++) { struct audit_tree *s; if (&chunk->owners[j] == p) { list_del_init(&p->list); @@ -290,7 +290,7 @@ static void untag_chunk(struct node *p) if (!s) /* result of earlier fallback */ continue; get_tree(s); - list_replace_init(&chunk->owners[i].list, &new->owners[j].list); + list_replace_init(&chunk->owners[j].list, &new->owners[i].list); } list_replace_rcu(&chunk->hash, &new->hash); -- GitLab From b4c30aad39805902cf5b855aa8a8b22d728ad057 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 19 Dec 2009 16:03:30 +0000 Subject: [PATCH 470/618] fix more leaks in audit_tree.c tag_chunk() Several leaks in audit_tree didn't get caught by commit 318b6d3d7ddbcad3d6867e630711b8a705d873d7, including the leak on normal exit in case of multiple rules refering to the same chunk. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- kernel/audit_tree.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index b36aa9651ba2..4b05bd9479db 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -373,15 +373,17 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) for (n = 0; n < old->count; n++) { if (old->owners[n].owner == tree) { spin_unlock(&hash_lock); - put_inotify_watch(watch); + put_inotify_watch(&old->watch); return 0; } } spin_unlock(&hash_lock); chunk = alloc_chunk(old->count + 1); - if (!chunk) + if (!chunk) { + put_inotify_watch(&old->watch); return -ENOMEM; + } mutex_lock(&inode->inotify_mutex); if (inotify_clone_watch(&old->watch, &chunk->watch) < 0) { @@ -425,7 +427,8 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&hash_lock); inotify_evict_watch(&old->watch); mutex_unlock(&inode->inotify_mutex); - put_inotify_watch(&old->watch); + put_inotify_watch(&old->watch); /* pair to inotify_find_watch */ + put_inotify_watch(&old->watch); /* and kill it */ return 0; } -- GitLab From 440b004cf953bec2bc8cd91c64ae707fd7e25327 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Sun, 20 Dec 2009 12:04:08 +0100 Subject: [PATCH 471/618] ALSA: hda/realtek: Remove extra .capsrc_nids initialization for ALC889_INTEL Signed-off-by: Jaroslav Kysela --- sound/pci/hda/patch_realtek.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8b375771b3ab..2d3f4f893ef3 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9238,8 +9238,6 @@ static struct alc_config_preset alc882_presets[] = { .dac_nids = alc883_dac_nids, .num_adc_nids = ARRAY_SIZE(alc889_adc_nids), .adc_nids = alc889_adc_nids, - .capsrc_nids = alc889_capsrc_nids, - .capsrc_nids = alc889_capsrc_nids, .dig_out_nid = ALC883_DIGOUT_NID, .dig_in_nid = ALC883_DIGIN_NID, .slave_dig_outs = alc883_slave_dig_outs, -- GitLab From 3df0fc5b2e9d8092dcaeb5ae0b6753d85c851d66 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sun, 20 Dec 2009 14:23:57 +0100 Subject: [PATCH 472/618] sched: Restore printk sanity Revert the braindead pr_* crap. (Commit 663997d "sched: Use pr_fmt() and pr_()") It's dumb and causes stupid "sched: " strings all over the place. Signed-off-by: Peter Zijlstra Acked-by: Mike Galbraith Cc: Joe Perches Cc: Linus Torvalds Cc: Andrew Morton LKML-Reference: <1261315437.4314.6.camel@laptop> [ i dont mind the pr_*() patterns that much - but Peter dislikes them with a vengence. ] [ - v2: remove spurious diffstat from changelog :-/ ] Signed-off-by: Ingo Molnar --- kernel/sched.c | 89 +++++++++++++++++++++++------------------ kernel/sched_idletask.c | 2 +- 2 files changed, 50 insertions(+), 41 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 720df108a2d6..7ffde2ae7868 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -26,8 +26,6 @@ * Thomas Gleixner, Mike Kravetz */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include @@ -5375,8 +5373,8 @@ static noinline void __schedule_bug(struct task_struct *prev) { struct pt_regs *regs = get_irq_regs(); - pr_err("BUG: scheduling while atomic: %s/%d/0x%08x\n", - prev->comm, prev->pid, preempt_count()); + printk(KERN_ERR "BUG: scheduling while atomic: %s/%d/0x%08x\n", + prev->comm, prev->pid, preempt_count()); debug_show_held_locks(prev); print_modules(); @@ -6940,23 +6938,23 @@ void sched_show_task(struct task_struct *p) unsigned state; state = p->state ? __ffs(p->state) + 1 : 0; - pr_info("%-13.13s %c", p->comm, + printk(KERN_INFO "%-13.13s %c", p->comm, state < sizeof(stat_nam) - 1 ? stat_nam[state] : '?'); #if BITS_PER_LONG == 32 if (state == TASK_RUNNING) - pr_cont(" running "); + printk(KERN_CONT " running "); else - pr_cont(" %08lx ", thread_saved_pc(p)); + printk(KERN_CONT " %08lx ", thread_saved_pc(p)); #else if (state == TASK_RUNNING) - pr_cont(" running task "); + printk(KERN_CONT " running task "); else - pr_cont(" %016lx ", thread_saved_pc(p)); + printk(KERN_CONT " %016lx ", thread_saved_pc(p)); #endif #ifdef CONFIG_DEBUG_STACK_USAGE free = stack_not_used(p); #endif - pr_cont("%5lu %5d %6d 0x%08lx\n", free, + printk(KERN_CONT "%5lu %5d %6d 0x%08lx\n", free, task_pid_nr(p), task_pid_nr(p->real_parent), (unsigned long)task_thread_info(p)->flags); @@ -6968,9 +6966,11 @@ void show_state_filter(unsigned long state_filter) struct task_struct *g, *p; #if BITS_PER_LONG == 32 - pr_info(" task PC stack pid father\n"); + printk(KERN_INFO + " task PC stack pid father\n"); #else - pr_info(" task PC stack pid father\n"); + printk(KERN_INFO + " task PC stack pid father\n"); #endif read_lock(&tasklist_lock); do_each_thread(g, p) { @@ -7828,44 +7828,48 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, printk(KERN_DEBUG "%*s domain %d: ", level, "", level); if (!(sd->flags & SD_LOAD_BALANCE)) { - pr_cont("does not load-balance\n"); + printk("does not load-balance\n"); if (sd->parent) - pr_err("ERROR: !SD_LOAD_BALANCE domain has parent\n"); + printk(KERN_ERR "ERROR: !SD_LOAD_BALANCE domain" + " has parent"); return -1; } - pr_cont("span %s level %s\n", str, sd->name); + printk(KERN_CONT "span %s level %s\n", str, sd->name); if (!cpumask_test_cpu(cpu, sched_domain_span(sd))) { - pr_err("ERROR: domain->span does not contain CPU%d\n", cpu); + printk(KERN_ERR "ERROR: domain->span does not contain " + "CPU%d\n", cpu); } if (!cpumask_test_cpu(cpu, sched_group_cpus(group))) { - pr_err("ERROR: domain->groups does not contain CPU%d\n", cpu); + printk(KERN_ERR "ERROR: domain->groups does not contain" + " CPU%d\n", cpu); } printk(KERN_DEBUG "%*s groups:", level + 1, ""); do { if (!group) { - pr_cont("\n"); - pr_err("ERROR: group is NULL\n"); + printk("\n"); + printk(KERN_ERR "ERROR: group is NULL\n"); break; } if (!group->cpu_power) { - pr_cont("\n"); - pr_err("ERROR: domain->cpu_power not set\n"); + printk(KERN_CONT "\n"); + printk(KERN_ERR "ERROR: domain->cpu_power not " + "set\n"); break; } if (!cpumask_weight(sched_group_cpus(group))) { - pr_cont("\n"); - pr_err("ERROR: empty group\n"); + printk(KERN_CONT "\n"); + printk(KERN_ERR "ERROR: empty group\n"); break; } if (cpumask_intersects(groupmask, sched_group_cpus(group))) { - pr_cont("\n"); - pr_err("ERROR: repeated CPUs\n"); + printk(KERN_CONT "\n"); + printk(KERN_ERR "ERROR: repeated CPUs\n"); break; } @@ -7873,21 +7877,23 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group)); - pr_cont(" %s", str); + printk(KERN_CONT " %s", str); if (group->cpu_power != SCHED_LOAD_SCALE) { - pr_cont(" (cpu_power = %d)", group->cpu_power); + printk(KERN_CONT " (cpu_power = %d)", + group->cpu_power); } group = group->next; } while (group != sd->groups); - pr_cont("\n"); + printk(KERN_CONT "\n"); if (!cpumask_equal(sched_domain_span(sd), groupmask)) - pr_err("ERROR: groups don't span domain->span\n"); + printk(KERN_ERR "ERROR: groups don't span domain->span\n"); if (sd->parent && !cpumask_subset(groupmask, sched_domain_span(sd->parent))) - pr_err("ERROR: parent span is not a superset of domain->span\n"); + printk(KERN_ERR "ERROR: parent span is not a superset " + "of domain->span\n"); return 0; } @@ -8443,7 +8449,8 @@ static int build_numa_sched_groups(struct s_data *d, sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(), GFP_KERNEL, num); if (!sg) { - pr_warning("Can not alloc domain group for node %d\n", num); + printk(KERN_WARNING "Can not alloc domain group for node %d\n", + num); return -ENOMEM; } d->sched_group_nodes[num] = sg; @@ -8472,8 +8479,8 @@ static int build_numa_sched_groups(struct s_data *d, sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(), GFP_KERNEL, num); if (!sg) { - pr_warning("Can not alloc domain group for node %d\n", - j); + printk(KERN_WARNING + "Can not alloc domain group for node %d\n", j); return -ENOMEM; } sg->cpu_power = 0; @@ -8701,7 +8708,7 @@ static enum s_alloc __visit_domain_allocation_hell(struct s_data *d, d->sched_group_nodes = kcalloc(nr_node_ids, sizeof(struct sched_group *), GFP_KERNEL); if (!d->sched_group_nodes) { - pr_warning("Can not alloc sched group node list\n"); + printk(KERN_WARNING "Can not alloc sched group node list\n"); return sa_notcovered; } sched_group_nodes_bycpu[cpumask_first(cpu_map)] = d->sched_group_nodes; @@ -8718,7 +8725,7 @@ static enum s_alloc __visit_domain_allocation_hell(struct s_data *d, return sa_send_covered; d->rd = alloc_rootdomain(); if (!d->rd) { - pr_warning("Cannot alloc root domain\n"); + printk(KERN_WARNING "Cannot alloc root domain\n"); return sa_tmpmask; } return sa_rootdomain; @@ -9700,11 +9707,13 @@ void __might_sleep(char *file, int line, int preempt_offset) return; prev_jiffy = jiffies; - pr_err("BUG: sleeping function called from invalid context at %s:%d\n", - file, line); - pr_err("in_atomic(): %d, irqs_disabled(): %d, pid: %d, name: %s\n", - in_atomic(), irqs_disabled(), - current->pid, current->comm); + printk(KERN_ERR + "BUG: sleeping function called from invalid context at %s:%d\n", + file, line); + printk(KERN_ERR + "in_atomic(): %d, irqs_disabled(): %d, pid: %d, name: %s\n", + in_atomic(), irqs_disabled(), + current->pid, current->comm); debug_show_held_locks(current); if (irqs_disabled()) diff --git a/kernel/sched_idletask.c b/kernel/sched_idletask.c index 21b969a28725..5f93b570d383 100644 --- a/kernel/sched_idletask.c +++ b/kernel/sched_idletask.c @@ -35,7 +35,7 @@ static void dequeue_task_idle(struct rq *rq, struct task_struct *p, int sleep) { raw_spin_unlock_irq(&rq->lock); - pr_err("bad: scheduling from the idle thread!\n"); + printk(KERN_ERR "bad: scheduling from the idle thread!\n"); dump_stack(); raw_spin_lock_irq(&rq->lock); } -- GitLab From 06393afde321b0fd7626b2d0966ebcaf6077de93 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 20 Dec 2009 15:39:55 -0500 Subject: [PATCH 473/618] Revert "pata_cmd64x: implement serialization as per notes" This reverts commit d43744390e460dce6626fb8de2c02a24ff650005, because it breaks the boot on several machines (mostly sparc64, at present). Signed-off-by: Jeff Garzik --- drivers/ata/pata_cmd64x.c | 116 +++----------------------------------- 1 file changed, 8 insertions(+), 108 deletions(-) diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index dadfc358ba1c..58c09e223838 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -31,7 +31,7 @@ #include #define DRV_NAME "pata_cmd64x" -#define DRV_VERSION "0.3.1" +#define DRV_VERSION "0.2.5" /* * CMD64x specific registers definition. @@ -254,109 +254,17 @@ static void cmd648_bmdma_stop(struct ata_queued_cmd *qc) } /** - * cmd64x_bmdma_stop - DMA stop callback + * cmd646r1_dma_stop - DMA stop callback * @qc: Command in progress * - * Track the completion of live DMA commands and clear the - * host->private_data DMA tracking flag as we do. + * Stub for now while investigating the r1 quirk in the old driver. */ -static void cmd64x_bmdma_stop(struct ata_queued_cmd *qc) +static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc) { - struct ata_port *ap = qc->ap; ata_bmdma_stop(qc); - WARN_ON(ap->host->private_data != ap); - ap->host->private_data = NULL; -} - -/** - * cmd64x_qc_defer - Defer logic for chip limits - * @qc: queued command - * - * Decide whether we can issue the command. Called under the host lock. - */ - -static int cmd64x_qc_defer(struct ata_queued_cmd *qc) -{ - struct ata_host *host = qc->ap->host; - struct ata_port *alt = host->ports[1 ^ qc->ap->port_no]; - int rc; - int dma = 0; - - /* Apply the ATA rules first */ - rc = ata_std_qc_defer(qc); - if (rc) - return rc; - - if (qc->tf.protocol == ATAPI_PROT_DMA || - qc->tf.protocol == ATA_PROT_DMA) - dma = 1; - - /* If the other port is not live then issue the command */ - if (alt == NULL || !alt->qc_active) { - if (dma) - host->private_data = qc->ap; - return 0; - } - /* If there is a live DMA command then wait */ - if (host->private_data != NULL) - return ATA_DEFER_PORT; - if (dma) - /* Cannot overlap our DMA command */ - return ATA_DEFER_PORT; - return 0; } -/** - * cmd64x_interrupt - ATA host interrupt handler - * @irq: irq line (unused) - * @dev_instance: pointer to our ata_host information structure - * - * Our interrupt handler for PCI IDE devices. Calls - * ata_sff_host_intr() for each port that is flagging an IRQ. We cannot - * use the defaults as we need to avoid touching status/altstatus during - * a DMA. - * - * LOCKING: - * Obtains host lock during operation. - * - * RETURNS: - * IRQ_NONE or IRQ_HANDLED. - */ -irqreturn_t cmd64x_interrupt(int irq, void *dev_instance) -{ - struct ata_host *host = dev_instance; - struct pci_dev *pdev = to_pci_dev(host->dev); - unsigned int i; - unsigned int handled = 0; - unsigned long flags; - static const u8 irq_reg[2] = { CFR, ARTTIM23 }; - static const u8 irq_mask[2] = { 1 << 2, 1 << 4 }; - - /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ - spin_lock_irqsave(&host->lock, flags); - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap; - u8 reg; - - pci_read_config_byte(pdev, irq_reg[i], ®); - ap = host->ports[i]; - if (ap && (reg & irq_mask[i]) && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->link.active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && - (qc->flags & ATA_QCFLAG_ACTIVE)) - handled |= ata_sff_host_intr(ap, qc); - } - } - - spin_unlock_irqrestore(&host->lock, flags); - - return IRQ_RETVAL(handled); -} static struct scsi_host_template cmd64x_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -365,8 +273,6 @@ static const struct ata_port_operations cmd64x_base_ops = { .inherits = &ata_bmdma_port_ops, .set_piomode = cmd64x_set_piomode, .set_dmamode = cmd64x_set_dmamode, - .bmdma_stop = cmd64x_bmdma_stop, - .qc_defer = cmd64x_qc_defer, }; static struct ata_port_operations cmd64x_port_ops = { @@ -376,6 +282,7 @@ static struct ata_port_operations cmd64x_port_ops = { static struct ata_port_operations cmd646r1_port_ops = { .inherits = &cmd64x_base_ops, + .bmdma_stop = cmd646r1_bmdma_stop, .cable_detect = ata_cable_40wire, }; @@ -383,7 +290,6 @@ static struct ata_port_operations cmd648_port_ops = { .inherits = &cmd64x_base_ops, .bmdma_stop = cmd648_bmdma_stop, .cable_detect = cmd648_cable_detect, - .qc_defer = ata_std_qc_defer }; static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) @@ -432,7 +338,6 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL }; u8 mrdmode; int rc; - struct ata_host *host; rc = pcim_enable_device(pdev); if (rc) @@ -450,25 +355,20 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ppi[0] = &cmd_info[3]; } - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); pci_read_config_byte(pdev, MRDMODE, &mrdmode); mrdmode &= ~ 0x30; /* IRQ set up */ mrdmode |= 0x02; /* Memory read line enable */ pci_write_config_byte(pdev, MRDMODE, mrdmode); + /* Force PIO 0 here.. */ + /* PPC specific fixup copied from old driver */ #ifdef CONFIG_PPC pci_write_config_byte(pdev, UDIDETCR0, 0xF0); #endif - rc = ata_pci_sff_prepare_host(pdev, ppi, &host); - if (rc) - return rc; - /* We use this pointer to track the AP which has DMA running */ - host->private_data = NULL; - pci_set_master(pdev); - return ata_pci_sff_activate_host(host, cmd64x_interrupt, &cmd64x_sht); + return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL); } #ifdef CONFIG_PM -- GitLab From 509426bd46ad0903dca409803e0ee3d30f99f1e8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 20 Dec 2009 19:22:33 +0100 Subject: [PATCH 474/618] pata_cmd64x: fix overclocking of UDMA0-2 modes adev->dma_mode stores the transfer mode value not UDMA mode number so the condition in cmd64x_set_dmamode() is always true and the higher UDMA clock is always selected. This can potentially result in data corruption when UDMA33 device is used, when 40-wire cable is used or when the error recovery code decides to lower the device speed down. The issue was introduced in the commit 6a40da0 ("libata cmd64x: whack into a shape that looks like the documentation") which goes back to kernel 2.6.20. Cc: stable@kernel.org Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_cmd64x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 58c09e223838..0efb1f58f255 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -219,7 +219,7 @@ static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev) regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift; /* Merge the control bits */ regU |= 1 << adev->devno; /* UDMA on */ - if (adev->dma_mode > 2) /* 15nS timing */ + if (adev->dma_mode > XFER_UDMA_2) /* 15nS timing */ regU |= 4 << adev->devno; } else { regU &= ~ (1 << adev->devno); /* UDMA off */ -- GitLab From 70f1120527797adb31c68bdc6f1b45e182c342c7 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sun, 20 Dec 2009 17:36:27 +0100 Subject: [PATCH 475/618] sched: Fix hotplug hang The hot-unplug kstopmachine usage does a wakeup after deactivating the cpu, hence we cannot use cpu_active() here but must rely on the good olde online. Reported-by: Sachin Sant Reported-by: Jens Axboe Signed-off-by: Peter Zijlstra Tested-by: Jens Axboe Cc: Heiko Carstens Cc: Benjamin Herrenschmidt LKML-Reference: <1261326987.4314.24.camel@laptop> Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 7ffde2ae7868..87f1f47beffe 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2346,7 +2346,7 @@ int select_task_rq(struct task_struct *p, int sd_flags, int wake_flags) * not worry about this generic constraint ] */ if (unlikely(!cpumask_test_cpu(cpu, &p->cpus_allowed) || - !cpu_active(cpu))) + !cpu_online(cpu))) cpu = select_fallback_rq(task_cpu(p), p); return cpu; -- GitLab From 7ccec3e72693f48957f37949039bf2dfd1c80f22 Mon Sep 17 00:00:00 2001 From: Albert Herranz Date: Fri, 18 Dec 2009 10:04:42 +0000 Subject: [PATCH 476/618] powerpc/gc/wii: hlwd-pic: convert irq_desc.lock to raw_spinlock Fix the following build failures: arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_irq_cascade': arch/powerpc/platforms/embedded6xx/hlwd-pic.c:135: error: passing argument 1 of 'spin_lock' from incompatible pointer type arch/powerpc/platforms/embedded6xx/hlwd-pic.c:137: error: passing argument 1 of 'spin_unlock' from incompatible pointer type arch/powerpc/platforms/embedded6xx/hlwd-pic.c:145: error: passing argument 1 of 'spin_lock' from incompatible pointer type arch/powerpc/platforms/embedded6xx/hlwd-pic.c:149: error: passing argument 1 of 'spin_unlock' from incompatible pointer type These failures are caused by the changes introduced in commit "genirq: Convert irq_desc.lock to raw_spinlock". The reason this driver was not updated is that it wasn't merged yet. Signed-off-by: Albert Herranz Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c index dd20bff33207..cba40d02070d 100644 --- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c @@ -132,9 +132,9 @@ static void hlwd_pic_irq_cascade(unsigned int cascade_virq, struct irq_host *irq_host = get_irq_data(cascade_virq); unsigned int virq; - spin_lock(&desc->lock); + raw_spin_lock(&desc->lock); desc->chip->mask(cascade_virq); /* IRQ_LEVEL */ - spin_unlock(&desc->lock); + raw_spin_unlock(&desc->lock); virq = __hlwd_pic_get_irq(irq_host); if (virq != NO_IRQ) @@ -142,11 +142,11 @@ static void hlwd_pic_irq_cascade(unsigned int cascade_virq, else pr_err("spurious interrupt!\n"); - spin_lock(&desc->lock); + raw_spin_lock(&desc->lock); desc->chip->ack(cascade_virq); /* IRQ_LEVEL */ if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask) desc->chip->unmask(cascade_virq); - spin_unlock(&desc->lock); + raw_spin_unlock(&desc->lock); } /* -- GitLab From 95cd34b42b43c0ed5a89a764e023189bfe7b1530 Mon Sep 17 00:00:00 2001 From: Albert Herranz Date: Fri, 18 Dec 2009 10:04:05 +0000 Subject: [PATCH 477/618] powerpc/gc/wii: Remove get_irq_desc() Fix the following build failures: arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_map': arch/powerpc/platforms/embedded6xx/flipper-pic.c:105: error: implicit declaration of function 'get_irq_desc' arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_map': arch/powerpc/platforms/embedded6xx/hlwd-pic.c:98: error: implicit declaration of function 'get_irq_desc' These failures are caused by the changes introduced in commit "powerpc: Remove get_irq_desc()". The reason these drivers were not updated is that they weren't merged yet. Signed-off-by: Albert Herranz Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/embedded6xx/flipper-pic.c | 2 +- arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c index d5963285e3be..c278bd3a8fec 100644 --- a/arch/powerpc/platforms/embedded6xx/flipper-pic.c +++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c @@ -102,7 +102,7 @@ static int flipper_pic_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hwirq) { set_irq_chip_data(virq, h->host_data); - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &flipper_pic, handle_level_irq); return 0; } diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c index cba40d02070d..a771f91e215b 100644 --- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c @@ -95,7 +95,7 @@ static int hlwd_pic_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hwirq) { set_irq_chip_data(virq, h->host_data); - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &hlwd_pic, handle_level_irq); return 0; } -- GitLab From aa0baaef97c89de2ef216fcc017215ee01662a10 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 21 Dec 2009 02:46:11 +0100 Subject: [PATCH 478/618] PM: Use pm_runtime_put_sync in system resume This patch (as1317) fixes a bug in the PM core. When a device is resumed following a system sleep, the core decrements the device's runtime PM usage counter but doesn't issue an idle notification if the counter reaches 0. This could prevent an otherwise unused device from being runtime-suspended again after the system sleep. The fix is to call pm_runtime_put_sync() instead of pm_runtime_put_noidle(). Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki --- drivers/base/power/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 8052dafc0ba9..48adf80926a0 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -607,7 +607,7 @@ static void dpm_complete(pm_message_t state) mutex_unlock(&dpm_list_mtx); device_complete(dev, state); - pm_runtime_put_noidle(dev); + pm_runtime_put_sync(dev); mutex_lock(&dpm_list_mtx); } @@ -880,7 +880,7 @@ static int dpm_prepare(pm_message_t state) pm_runtime_get_noresume(dev); if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) { /* Wake-up requested during system sleep transition. */ - pm_runtime_put_noidle(dev); + pm_runtime_put_sync(dev); error = -EBUSY; } else { error = device_prepare(dev, state); -- GitLab From b74665606962456af7f92b1e448cee30ce70967b Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 20 Dec 2009 18:40:18 -0800 Subject: [PATCH 479/618] bnx2: Fix bnx2_netif_stop() merge error. The error was introduced while merging: commit 4529819c45161e4a119134f56ef504e69420bc98 bnx2: reset_task is crashing the kernel. Fixing it. Signed-off-by: Michael Chan k Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index f38764ec02c3..65df1de447e4 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -666,6 +666,7 @@ bnx2_netif_stop(struct bnx2 *bp) txq->trans_start = jiffies; } } + bnx2_disable_int_sync(bp); } static void @@ -679,7 +680,6 @@ bnx2_netif_start(struct bnx2 *bp) bnx2_cnic_start(bp); } } - bnx2_disable_int_sync(bp); } static void -- GitLab From 3d354cbc43db36e7e8b27ed78901064b87864ffc Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Sun, 20 Dec 2009 10:43:35 -0500 Subject: [PATCH 480/618] nfsd: fix "insecure" export option A typo in 12045a6ee9908b "nfsd: let "insecure" flag vary by pseudoflavor" reversed the sense of the "insecure" flag. Reported-by: Michael Guntsche Signed-off-by: J. Bruce Fields Signed-off-by: Linus Torvalds --- fs/nfsd/nfsfh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfsfh.c b/fs/nfsd/nfsfh.c index 1c12177b908c..55c8e63af0be 100644 --- a/fs/nfsd/nfsfh.c +++ b/fs/nfsd/nfsfh.c @@ -89,7 +89,7 @@ static __be32 nfsd_setuser_and_check_port(struct svc_rqst *rqstp, int flags = nfsexp_flags(rqstp, exp); /* Check if the request originated from a secure port. */ - if (!rqstp->rq_secure && (flags & NFSEXP_INSECURE_PORT)) { + if (!rqstp->rq_secure && !(flags & NFSEXP_INSECURE_PORT)) { RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]); dprintk(KERN_WARNING "nfsd: request from insecure port %s!\n", -- GitLab From e2595322a3a353a59cecd7f57e7aa421ecb02d12 Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Sat, 19 Dec 2009 18:19:02 -0500 Subject: [PATCH 481/618] ALSA: hda: Set Front Mic to input vref 50% for Lenovo 3000 Y410 BugLink: https://bugs.launchpad.net/bugs/479373 The OR has verified with hda-verb that the internal microphone needs VREF50 set for audible capture. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 84bc2c7c4421..1554c3a6fd2e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10686,6 +10686,13 @@ static struct hda_verb alc262_lenovo_3000_unsol_verbs[] = { {} }; +static struct hda_verb alc262_lenovo_3000_init_verbs[] = { + /* Front Mic pin: input vref at 50% */ + {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, + {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {} +}; + static struct hda_input_mux alc262_fujitsu_capture_source = { .num_items = 3, .items = { @@ -11728,7 +11735,8 @@ static struct alc_config_preset alc262_presets[] = { [ALC262_LENOVO_3000] = { .mixers = { alc262_lenovo_3000_mixer }, .init_verbs = { alc262_init_verbs, alc262_EAPD_verbs, - alc262_lenovo_3000_unsol_verbs }, + alc262_lenovo_3000_unsol_verbs, + alc262_lenovo_3000_init_verbs }, .num_dacs = ARRAY_SIZE(alc262_dac_nids), .dac_nids = alc262_dac_nids, .hp_nid = 0x03, -- GitLab From 0f86a228f4a4639b3142ce0dad208433b2db377a Mon Sep 17 00:00:00 2001 From: Hector Martin Date: Sun, 20 Dec 2009 22:51:18 +0100 Subject: [PATCH 482/618] ALSA: HDA: simplify Aspire 8930G verb array This patch just simplifies the 8930G verb array a bit. Just use the common ALC889 EAPD verb array to make things more consistent. The file is already huge enough already. Signed-off-by: Hector Martin Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1554c3a6fd2e..cb97323acc17 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1665,9 +1665,6 @@ static struct hda_verb alc889_acer_aspire_8930g_verbs[] = { /* some bit here disables the other DACs. Init=0x4900 */ {0x20, AC_VERB_SET_COEF_INDEX, 0x08}, {0x20, AC_VERB_SET_PROC_COEF, 0x0000}, -/* Enable amplifiers */ - {0x14, AC_VERB_SET_EAPD_BTLENABLE, 0x02}, - {0x15, AC_VERB_SET_EAPD_BTLENABLE, 0x02}, /* DMIC fix * This laptop has a stereo digital microphone. The mics are only 1cm apart * which makes the stereo useless. However, either the mic or the ALC889 @@ -9386,7 +9383,8 @@ static struct alc_config_preset alc882_presets[] = { .mixers = { alc888_base_mixer, alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs, - alc889_acer_aspire_8930g_verbs }, + alc889_acer_aspire_8930g_verbs, + alc889_eapd_verbs}, .num_dacs = ARRAY_SIZE(alc883_dac_nids), .dac_nids = alc883_dac_nids, .num_adc_nids = ARRAY_SIZE(alc889_adc_nids), -- GitLab From 556eea9a926bff8f014b4f80522b4de97ae84213 Mon Sep 17 00:00:00 2001 From: Hector Martin Date: Sun, 20 Dec 2009 22:51:23 +0100 Subject: [PATCH 483/618] ALSA: HDA: remove useless mixers on Aspire 8930G This patch removes some extra mixers that do nothing on the Acer Aspire 8930G. The CD mixer is useless because the SATA DVD/Blu-Ray drive has no analog audio output, and the Side mixer is useless because we max out at 6ch anyway. Signed-off-by: Hector Martin Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index cb97323acc17..faeb74f28207 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1777,6 +1777,25 @@ static struct snd_kcontrol_new alc888_base_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new alc889_acer_aspire_8930g_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), + HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, + HDA_OUTPUT), + HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), + HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + { } /* end */ +}; + + static void alc888_acer_aspire_4930g_setup(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; @@ -9380,7 +9399,7 @@ static struct alc_config_preset alc882_presets[] = { .init_hook = alc_automute_amp, }, [ALC888_ACER_ASPIRE_8930G] = { - .mixers = { alc888_base_mixer, + .mixers = { alc889_acer_aspire_8930g_mixer, alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs, alc889_acer_aspire_8930g_verbs, -- GitLab From f5de24b06aa46427500d0fdbe8616b73a71d8c28 Mon Sep 17 00:00:00 2001 From: Hector Martin Date: Sun, 20 Dec 2009 22:51:31 +0100 Subject: [PATCH 484/618] ALSA: HDA: add powersaving hook for Realtek The current Realtek code makes no specific provision for turning stuff off. The codec chip is placed into low-power mode generically, but this doesn't turn off any external hardware connected to it, in particular external amplifiers. This patch creates a hook function that is called by the codec suspend/resume functions. It ought to disable any external hardware in a device-specific way. I've implemented a generic ALC889 function that sets the EAPD pin properly, and used it for the Acer Aspire 8930G which can benefit from this feature. On my laptop, this results in ~0.5W extra savings. Signed-off-by: Hector Martin Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 36 +++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index faeb74f28207..b3abe9ca826d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -337,6 +337,9 @@ struct alc_spec { /* hooks */ void (*init_hook)(struct hda_codec *codec); void (*unsol_event)(struct hda_codec *codec, unsigned int res); +#ifdef CONFIG_SND_HDA_POWER_SAVE + void (*power_hook)(struct hda_codec *codec, int power); +#endif /* for pin sensing */ unsigned int sense_updated: 1; @@ -388,6 +391,7 @@ struct alc_config_preset { void (*init_hook)(struct hda_codec *); #ifdef CONFIG_SND_HDA_POWER_SAVE struct hda_amp_list *loopbacks; + void (*power_hook)(struct hda_codec *codec, int power); #endif }; @@ -900,6 +904,7 @@ static void setup_preset(struct hda_codec *codec, spec->unsol_event = preset->unsol_event; spec->init_hook = preset->init_hook; #ifdef CONFIG_SND_HDA_POWER_SAVE + spec->power_hook = preset->power_hook; spec->loopback.amplist = preset->loopbacks; #endif @@ -1826,6 +1831,16 @@ static void alc889_acer_aspire_8930g_setup(struct hda_codec *codec) spec->autocfg.speaker_pins[2] = 0x1b; } +#ifdef CONFIG_SND_HDA_POWER_SAVE +static void alc889_power_eapd(struct hda_codec *codec, int power) +{ + snd_hda_codec_write(codec, 0x14, 0, + AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0); + snd_hda_codec_write(codec, 0x15, 0, + AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0); +} +#endif + /* * ALC880 3-stack model * @@ -3619,12 +3634,29 @@ static void alc_free(struct hda_codec *codec) snd_hda_detach_beep_device(codec); } +#ifdef CONFIG_SND_HDA_POWER_SAVE +static int alc_suspend(struct hda_codec *codec, pm_message_t state) +{ + struct alc_spec *spec = codec->spec; + if (spec && spec->power_hook) + spec->power_hook(codec, 0); + return 0; +} +#endif + #ifdef SND_HDA_NEEDS_RESUME static int alc_resume(struct hda_codec *codec) { +#ifdef CONFIG_SND_HDA_POWER_SAVE + struct alc_spec *spec = codec->spec; +#endif codec->patch_ops.init(codec); snd_hda_codec_resume_amp(codec); snd_hda_codec_resume_cache(codec); +#ifdef CONFIG_SND_HDA_POWER_SAVE + if (spec && spec->power_hook) + spec->power_hook(codec, 1); +#endif return 0; } #endif @@ -3641,6 +3673,7 @@ static struct hda_codec_ops alc_patch_ops = { .resume = alc_resume, #endif #ifdef CONFIG_SND_HDA_POWER_SAVE + .suspend = alc_suspend, .check_power_status = alc_check_power_status, #endif }; @@ -9420,6 +9453,9 @@ static struct alc_config_preset alc882_presets[] = { .unsol_event = alc_automute_amp_unsol_event, .setup = alc889_acer_aspire_8930g_setup, .init_hook = alc_automute_amp, +#ifdef CONFIG_SND_HDA_POWER_SAVE + .power_hook = alc889_power_eapd, +#endif }, [ALC888_ACER_ASPIRE_7730G] = { .mixers = { alc883_3ST_6ch_mixer, -- GitLab From 40962d7c741de1c21b6ce8516c1d9f8836fb383e Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sat, 19 Dec 2009 18:31:04 +0100 Subject: [PATCH 485/618] ALSA: fix incorrect rounding direction in snd_interval_ratnum() The direction of rounding is incorrect in the snd_interval_ratnum() It was detected with following parameters (sb8 driver playing 8kHz stereo file): - num is always 1000000 - requested frequency rate is from 7999 to 7999 (single frequency) The first loop calculates div_down(num, freq->min) which is 125. Thus, a frequency range's minimum value is 1000000 / 125 = 8000 Hz. The second loop calculates div_up(num, freq->max) which is 126 The frequency range's maximum value is 1000000 / 126 = 7936 Hz. The range maximum is lower than the range minimum so the function fails due to empty result range. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/core/pcm_lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 30f410832a25..a27545b23ee9 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -758,7 +758,7 @@ int snd_interval_ratnum(struct snd_interval *i, int diff; if (q == 0) q = 1; - den = div_down(num, q); + den = div_up(num, q); if (den < rats[k].den_min) continue; if (den > rats[k].den_max) @@ -794,7 +794,7 @@ int snd_interval_ratnum(struct snd_interval *i, i->empty = 1; return -EINVAL; } - den = div_up(num, q); + den = div_down(num, q); if (den > rats[k].den_max) continue; if (den < rats[k].den_min) -- GitLab From db8cf334f66bdf1ba2b3d2f7128095fc9b7a6e2b Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sun, 20 Dec 2009 20:15:19 +0100 Subject: [PATCH 486/618] ALSA: sbawe: fix memory detection Memory amount is increased before a successful write-read sequence is done. Thus, 512 kB of onboard memory is detected on memoryless cards like SB32. Move the increasing of memory counter after successful read is done. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/sb/emu8000.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/isa/sb/emu8000.c b/sound/isa/sb/emu8000.c index 96678d5d3834..751762f1c59a 100644 --- a/sound/isa/sb/emu8000.c +++ b/sound/isa/sb/emu8000.c @@ -393,8 +393,6 @@ size_dram(struct snd_emu8000 *emu) while (size < EMU8000_MAX_DRAM) { - size += 512 * 1024; /* increment 512kbytes */ - /* Write a unique data on the test address. * if the address is out of range, the data is written on * 0x200000(=EMU8000_DRAM_OFFSET). Then the id word is @@ -414,7 +412,9 @@ size_dram(struct snd_emu8000 *emu) /*snd_emu8000_read_wait(emu);*/ EMU8000_SMLD_READ(emu); /* discard stale data */ if (EMU8000_SMLD_READ(emu) != UNIQUE_ID2) - break; /* we must have wrapped around */ + break; /* no memory at this address */ + + size += 512 * 1024; /* increment 512kbytes */ snd_emu8000_read_wait(emu); -- GitLab From 0e2c8b8f55072a98b99e7bdad55c912084d6a526 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 20 Dec 2009 10:50:02 +0100 Subject: [PATCH 487/618] resources: fix call to alignf() in allocate_resource() The second parameter to alignf() in allocate_resource() must reflect what new resource is attempted to be allocated, else functions like pcibios_align_resource() (at least on x86) or pcmcia_align() can't work correctly. Commit 1e5ad9679016275d422e36b12a98b0927d76f556 broke this by setting the "new" resource until we're about to return success. To keep the resource untouched when allocate_resource() fails, a "tmp" resource is introduced. Signed-off-by: Dominik Brodowski Acked-by: Bjorn Helgaas Cc: Yinghai Lu Cc: Jesse Barnes Signed-off-by: Linus Torvalds --- kernel/resource.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/kernel/resource.c b/kernel/resource.c index dc15686b7a77..af96c1e4b54b 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -308,37 +308,37 @@ static int find_resource(struct resource *root, struct resource *new, void *alignf_data) { struct resource *this = root->child; - resource_size_t start, end; + struct resource tmp = *new; - start = root->start; + tmp.start = root->start; /* * Skip past an allocated resource that starts at 0, since the assignment - * of this->start - 1 to new->end below would cause an underflow. + * of this->start - 1 to tmp->end below would cause an underflow. */ if (this && this->start == 0) { - start = this->end + 1; + tmp.start = this->end + 1; this = this->sibling; } for(;;) { if (this) - end = this->start - 1; + tmp.end = this->start - 1; else - end = root->end; - if (start < min) - start = min; - if (end > max) - end = max; - start = ALIGN(start, align); + tmp.end = root->end; + if (tmp.start < min) + tmp.start = min; + if (tmp.end > max) + tmp.end = max; + tmp.start = ALIGN(tmp.start, align); if (alignf) - alignf(alignf_data, new, size, align); - if (start < end && end - start >= size - 1) { - new->start = start; - new->end = start + size - 1; + alignf(alignf_data, &tmp, size, align); + if (tmp.start < tmp.end && tmp.end - tmp.start >= size - 1) { + new->start = tmp.start; + new->end = tmp.start + size - 1; return 0; } if (!this) break; - start = this->end + 1; + tmp.start = this->end + 1; this = this->sibling; } return -EBUSY; -- GitLab From 3439d65062a4af6af0433c8816fd54697d782ff4 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 14 Jul 2009 13:39:47 -0400 Subject: [PATCH 488/618] pata_bf54x: handle portmuxing of pins through GPIO PORTs By default, the PATA pins are routed to the async address lines in which case, no peripheral muxing needs to be done. However, if the pins get routed through the GPIO PORTs pins, we need to make sure to request them so that the muxing is properly set up. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Jeff Garzik --- drivers/ata/pata_bf54x.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index c4b47a3e5446..02c81f12c702 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1557,6 +1557,25 @@ static unsigned short atapi_io_port[] = { P_ATAPI_DMARQ, P_ATAPI_INTRQ, P_ATAPI_IORDY, + P_ATAPI_D0A, + P_ATAPI_D1A, + P_ATAPI_D2A, + P_ATAPI_D3A, + P_ATAPI_D4A, + P_ATAPI_D5A, + P_ATAPI_D6A, + P_ATAPI_D7A, + P_ATAPI_D8A, + P_ATAPI_D9A, + P_ATAPI_D10A, + P_ATAPI_D11A, + P_ATAPI_D12A, + P_ATAPI_D13A, + P_ATAPI_D14A, + P_ATAPI_D15A, + P_ATAPI_A0A, + P_ATAPI_A1A, + P_ATAPI_A2A, 0 }; -- GitLab From d8d881dd2c814e1500558889d800cf78d11cf898 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 22 Dec 2009 07:52:49 +0100 Subject: [PATCH 489/618] ALSA: hda - Fix NULL dereference with enable_beep=0 option Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 3d59f8325848..417fb22ae83c 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3779,15 +3779,16 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out err = snd_hda_attach_beep_device(codec, nid); if (err < 0) return err; - /* IDT/STAC codecs have linear beep tone parameter */ - codec->beep->linear_tone = 1; - /* if no beep switch is available, make its own one */ - caps = query_amp_caps(codec, nid, HDA_OUTPUT); - if (codec->beep && - !((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT)) { - err = stac92xx_beep_switch_ctl(codec); - if (err < 0) - return err; + if (codec->beep) { + /* IDT/STAC codecs have linear beep tone parameter */ + codec->beep->linear_tone = 1; + /* if no beep switch is available, make its own one */ + caps = query_amp_caps(codec, nid, HDA_OUTPUT); + if (!(caps & AC_AMPCAP_MUTE)) { + err = stac92xx_beep_switch_ctl(codec); + if (err < 0) + return err; + } } } #endif -- GitLab From 1a5ba2e9fc7999b8de2a71c7e7b9f58d752c05e4 Mon Sep 17 00:00:00 2001 From: Rafael Avila de Espindola Date: Tue, 22 Dec 2009 07:59:37 +0100 Subject: [PATCH 490/618] ALSA: hda - Add support for the new 27 inch IMacs With the attached patch I am able to use the sound on a new IMac 27. What works: *) Internal speakers *) Internal microphone *) Headphone I don't have an external mic or a SPDIF device to test the rest. Signed-off-by: Rafael Avila de Espindola Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_cirrus.c | 22 +++++++++++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index e93affff3af8..e72cee9e2a71 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -403,4 +403,5 @@ STAC9872 Cirrus Logic CS4206/4207 ======================== mbp55 MacBook Pro 5,5 + imac27 IMac 27 Inch auto BIOS setup (default) diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 4b200da1bd18..fe0423c39598 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -66,6 +66,7 @@ struct cs_spec { /* available models */ enum { CS420X_MBP55, + CS420X_IMAC27, CS420X_AUTO, CS420X_MODELS }; @@ -827,7 +828,8 @@ static void cs_automute(struct hda_codec *codec) AC_VERB_SET_PIN_WIDGET_CONTROL, hp_present ? 0 : PIN_OUT); } - if (spec->board_config == CS420X_MBP55) { + if (spec->board_config == CS420X_MBP55 || + spec->board_config == CS420X_IMAC27) { unsigned int gpio = hp_present ? 0x02 : 0x08; snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, gpio); @@ -1069,12 +1071,14 @@ static int cs_parse_auto_config(struct hda_codec *codec) static const char *cs420x_models[CS420X_MODELS] = { [CS420X_MBP55] = "mbp55", + [CS420X_IMAC27] = "imac27", [CS420X_AUTO] = "auto", }; static struct snd_pci_quirk cs420x_cfg_tbl[] = { SND_PCI_QUIRK(0x10de, 0xcb79, "MacBookPro 5,5", CS420X_MBP55), + SND_PCI_QUIRK(0x8086, 0x7270, "IMac 27 Inch", CS420X_IMAC27), {} /* terminator */ }; @@ -1097,8 +1101,23 @@ static struct cs_pincfg mbp55_pincfgs[] = { {} /* terminator */ }; +static struct cs_pincfg imac27_pincfgs[] = { + { 0x09, 0x012b4050 }, + { 0x0a, 0x90100140 }, + { 0x0b, 0x90100142 }, + { 0x0c, 0x018b3020 }, + { 0x0d, 0x90a00110 }, + { 0x0e, 0x400000f0 }, + { 0x0f, 0x01cbe030 }, + { 0x10, 0x014be060 }, + { 0x12, 0x01ab9070 }, + { 0x15, 0x400000f0 }, + {} /* terminator */ +}; + static struct cs_pincfg *cs_pincfgs[CS420X_MODELS] = { [CS420X_MBP55] = mbp55_pincfgs, + [CS420X_IMAC27] = imac27_pincfgs, }; static void fix_pincfg(struct hda_codec *codec, int model) @@ -1128,6 +1147,7 @@ static int patch_cs420x(struct hda_codec *codec) fix_pincfg(codec, spec->board_config); switch (spec->board_config) { + case CS420X_IMAC27: case CS420X_MBP55: /* GPIO1 = headphones */ /* GPIO3 = speakers */ -- GitLab From 9dc8398bab52931435fce403ce2eaf5822f28e58 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 22 Dec 2009 08:15:01 +0100 Subject: [PATCH 491/618] ALSA: hda - Add MSI blacklist A machine with AMD CPU with Nvidia board doesn't work with MSI. Reported-by: Robert J. King Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 9b56f937913e..ff8ad46cc50e 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2322,6 +2322,7 @@ static void __devinit check_probe_mask(struct azx *chip, int dev) * white/black-list for enable_msi */ static struct snd_pci_quirk msi_black_list[] __devinitdata = { + SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */ {} }; -- GitLab From a9605391cfab2bf9a73e51faac5147622f73c6d5 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 21 Dec 2009 16:36:10 -0800 Subject: [PATCH 492/618] ALSA: sound/core/pcm_timer.c: use lib/gcd.c Make sound/core/pcm_timer.c use lib/gcd.c Signed-off-by: Florian Fainelli Signed-off-by: Andrew Morton Signed-off-by: Takashi Iwai --- sound/core/Kconfig | 1 + sound/core/pcm_timer.c | 17 +---------------- 2 files changed, 2 insertions(+), 16 deletions(-) diff --git a/sound/core/Kconfig b/sound/core/Kconfig index c15682a2f9db..475455c76610 100644 --- a/sound/core/Kconfig +++ b/sound/core/Kconfig @@ -5,6 +5,7 @@ config SND_TIMER config SND_PCM tristate select SND_TIMER + select GCD config SND_HWDEP tristate diff --git a/sound/core/pcm_timer.c b/sound/core/pcm_timer.c index ca8068b63d6c..b01d9481d632 100644 --- a/sound/core/pcm_timer.c +++ b/sound/core/pcm_timer.c @@ -20,6 +20,7 @@ */ #include +#include #include #include #include @@ -28,22 +29,6 @@ * Timer functions */ -/* Greatest common divisor */ -static unsigned long gcd(unsigned long a, unsigned long b) -{ - unsigned long r; - if (a < b) { - r = a; - a = b; - b = r; - } - while ((r = a % b) != 0) { - a = b; - b = r; - } - return b; -} - void snd_pcm_timer_resolution_change(struct snd_pcm_substream *substream) { unsigned long rate, mult, fsize, l, post; -- GitLab From b6aa179334743c6152bd63f1fa368d6db3720db9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 16 Dec 2009 17:10:09 +0100 Subject: [PATCH 493/618] ASoC: sh: FSI:: don't check platform_get_irq's return value against zero MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Better use (int)irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Signed-off-by: Uwe Kleine-König Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/sh/fsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 9c49c11c43ce..42813b808389 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -876,7 +876,7 @@ static int fsi_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!res || !irq) { + if (!res || (int)irq <= 0) { dev_err(&pdev->dev, "Not enough FSI platform resources.\n"); ret = -ENODEV; goto exit; -- GitLab From 1628af5adf64cc2960bce81009f119de822f876e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 22 Dec 2009 09:26:10 +0100 Subject: [PATCH 494/618] ASoC: add missing parameter to mx27vis_hifi_hw_free() Commit 2ccafed4 added an extra parameter to the DAI .set_pll() method, but it missed this call in sound/soc/imx/mx27vis_wm8974.c. Signed-off-by: Guennadi Liakhovetski Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/imx/mx27vis_wm8974.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/imx/mx27vis_wm8974.c b/sound/soc/imx/mx27vis_wm8974.c index 0267d2d91685..07d2a248438c 100644 --- a/sound/soc/imx/mx27vis_wm8974.c +++ b/sound/soc/imx/mx27vis_wm8974.c @@ -180,7 +180,8 @@ static int mx27vis_hifi_hw_free(struct snd_pcm_substream *substream) struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; /* disable the PLL */ - return codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, 0, 0); + return codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, IGNORED_ARG, + 0, 0); } /* -- GitLab From 355ffe69cb329bb9ab9eca3ebef369268162220d Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Tue, 22 Dec 2009 13:13:28 +0000 Subject: [PATCH 495/618] MAINTAINERS: update entries for WUSB, UWB and WLP subsystems Update the file patterns for the WUSB, UWB and WLP subsystems and add netdev@vger as the list for the WLP subsystem. Signed-off-by: David Vrabel --- MAINTAINERS | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index efd2ef2c2660..d5244f1580bc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1402,6 +1402,8 @@ L: linux-usb@vger.kernel.org S: Supported F: Documentation/usb/WUSB-Design-overview.txt F: Documentation/usb/wusb-cbaf +F: drivers/usb/host/hwa-hc.c +F: drivers/usb/host/whci/ F: drivers/usb/wusbcore/ F: include/linux/usb/wusb* @@ -5430,7 +5432,10 @@ ULTRA-WIDEBAND (UWB) SUBSYSTEM: M: David Vrabel L: linux-usb@vger.kernel.org S: Supported -F: drivers/uwb/* +F: drivers/uwb/ +X: drivers/uwb/wlp/ +X: drivers/uwb/i1480/i1480u-wlp/ +X: drivers/uwb/i1480/i1480-wlp.h F: include/linux/uwb.h F: include/linux/uwb/ @@ -5943,9 +5948,12 @@ W: http://linuxwimax.org WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM M: David Vrabel +L: netdev@vger.kernel.org S: Maintained F: include/linux/wlp.h F: drivers/uwb/wlp/ +F: drivers/uwb/i1480/i1480u-wlp/ +F: drivers/uwb/i1480/i1480-wlp.h WISTRON LAPTOP BUTTON DRIVER M: Miloslav Trmac -- GitLab From 385e3ed4f0b81dd0b0b214050a30d352a71b95f7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 16 Dec 2009 12:48:44 -0800 Subject: [PATCH 496/618] alloc_file(): simplify handling of mnt_clone_write() errors When alloc_file() and init_file() were combined, the error handling of mnt_clone_write() was taken into alloc_file() in a somewhat obfuscated way. Since we don't use the error code for anything except warning, we might as well warn directly without an extra variable. Signed-off-by: Roland Dreier Signed-off-by: Al Viro --- fs/file_table.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/file_table.c b/fs/file_table.c index 0afacf654398..69652c5bd5f0 100644 --- a/fs/file_table.c +++ b/fs/file_table.c @@ -186,10 +186,8 @@ struct file *alloc_file(struct path *path, fmode_t mode, * that we can do debugging checks at __fput() */ if ((mode & FMODE_WRITE) && !special_file(path->dentry->d_inode->i_mode)) { - int error = 0; file_take_write(file); - error = mnt_clone_write(path->mnt); - WARN_ON(error); + WARN_ON(mnt_clone_write(path->mnt)); } ima_counts_get(file); return file; -- GitLab From 05f94c9b74b0bed5469d97edffae350ec9c1f205 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 18 Dec 2009 15:40:44 +0300 Subject: [PATCH 497/618] pohmelfs needs I_LOCK Kill debugging printk in question Signed-off-by: Evgeniy Polyakov Signed-off-by: Al Viro --- drivers/staging/pohmelfs/dir.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c index 6c5b261e9f06..aacd25bfb0cb 100644 --- a/drivers/staging/pohmelfs/dir.c +++ b/drivers/staging/pohmelfs/dir.c @@ -722,8 +722,6 @@ static int pohmelfs_remove_entry(struct inode *dir, struct dentry *dentry) if (inode->i_nlink) inode_dec_link_count(inode); } - dprintk("%s: inode: %p, lock: %ld, unhashed: %d.\n", - __func__, pi, inode->i_state & I_LOCK, hlist_unhashed(&inode->i_hash)); return err; } -- GitLab From ed2617585f39dd12fae38c657bba68b9779ea10d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 21 Dec 2009 17:53:53 +0100 Subject: [PATCH 498/618] fs/compat_ioctl.c: fix build error when !BLOCK No driver uses SG_SET_TRANSFORM any more in Linux, since the ide-scsi driver was removed in 2.6.29. The compat-ioctl cleanup series moved the handling for this around, which broke building without CONFIG_BLOCK. Just remove the code handling it for compat mode. Signed-off-by: Al Viro --- fs/compat_ioctl.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 14cbc831422a..332dd00f0894 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -1600,8 +1600,6 @@ static long do_ioctl_trans(int fd, unsigned int cmd, case KDSKBMETA: case KDSKBLED: case KDSETLED: - /* SG stuff */ - case SG_SET_TRANSFORM: /* AUTOFS */ case AUTOFS_IOC_READY: case AUTOFS_IOC_FAIL: -- GitLab From 628ff7c1d8d8466a5ad8078bd0206a130f8b8a51 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 18 Dec 2009 09:41:24 -0800 Subject: [PATCH 499/618] anonfd: Allow making anon files read-only It seems a couple places such as arch/ia64/kernel/perfmon.c and drivers/infiniband/core/uverbs_main.c could use anon_inode_getfile() instead of a private pseudo-fs + alloc_file(), if only there were a way to get a read-only file. So provide this by having anon_inode_getfile() create a read-only file if we pass O_RDONLY in flags. Signed-off-by: Roland Dreier Signed-off-by: Al Viro --- fs/anon_inodes.c | 12 ++++++++++-- fs/eventfd.c | 2 +- fs/eventpoll.c | 2 +- fs/signalfd.c | 2 +- fs/timerfd.c | 2 +- kernel/perf_event.c | 2 +- virt/kvm/kvm_main.c | 4 ++-- 7 files changed, 17 insertions(+), 9 deletions(-) diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c index 2c994591f4d7..598237e97221 100644 --- a/fs/anon_inodes.c +++ b/fs/anon_inodes.c @@ -89,11 +89,19 @@ struct file *anon_inode_getfile(const char *name, struct qstr this; struct path path; struct file *file; + fmode_t mode; int error; if (IS_ERR(anon_inode_inode)) return ERR_PTR(-ENODEV); + switch (flags & O_ACCMODE) { + case O_RDONLY: mode = FMODE_READ; break; + case O_WRONLY: mode = FMODE_WRITE; break; + case O_RDWR: mode = FMODE_READ | FMODE_WRITE; break; + default: return ERR_PTR(-EINVAL); + } + if (fops->owner && !try_module_get(fops->owner)) return ERR_PTR(-ENOENT); @@ -121,13 +129,13 @@ struct file *anon_inode_getfile(const char *name, d_instantiate(path.dentry, anon_inode_inode); error = -ENFILE; - file = alloc_file(&path, FMODE_READ | FMODE_WRITE, fops); + file = alloc_file(&path, mode, fops); if (!file) goto err_dput; file->f_mapping = anon_inode_inode->i_mapping; file->f_pos = 0; - file->f_flags = O_RDWR | (flags & O_NONBLOCK); + file->f_flags = flags & (O_ACCMODE | O_NONBLOCK); file->f_version = 0; file->private_data = priv; diff --git a/fs/eventfd.c b/fs/eventfd.c index 8b47e4200e65..d26402ff06ea 100644 --- a/fs/eventfd.c +++ b/fs/eventfd.c @@ -339,7 +339,7 @@ struct file *eventfd_file_create(unsigned int count, int flags) ctx->flags = flags; file = anon_inode_getfile("[eventfd]", &eventfd_fops, ctx, - flags & EFD_SHARED_FCNTL_FLAGS); + O_RDWR | (flags & EFD_SHARED_FCNTL_FLAGS)); if (IS_ERR(file)) eventfd_free_ctx(ctx); diff --git a/fs/eventpoll.c b/fs/eventpoll.c index 366c503f9657..bd056a5b4efc 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -1206,7 +1206,7 @@ SYSCALL_DEFINE1(epoll_create1, int, flags) * a file structure and a free file descriptor. */ error = anon_inode_getfd("[eventpoll]", &eventpoll_fops, ep, - flags & O_CLOEXEC); + O_RDWR | (flags & O_CLOEXEC)); if (error < 0) ep_free(ep); diff --git a/fs/signalfd.c b/fs/signalfd.c index b07565c94386..1dabe4ee02fe 100644 --- a/fs/signalfd.c +++ b/fs/signalfd.c @@ -236,7 +236,7 @@ SYSCALL_DEFINE4(signalfd4, int, ufd, sigset_t __user *, user_mask, * anon_inode_getfd() will install the fd. */ ufd = anon_inode_getfd("[signalfd]", &signalfd_fops, ctx, - flags & (O_CLOEXEC | O_NONBLOCK)); + O_RDWR | (flags & (O_CLOEXEC | O_NONBLOCK))); if (ufd < 0) kfree(ctx); } else { diff --git a/fs/timerfd.c b/fs/timerfd.c index b042bd7034b1..1bfc95ad5f71 100644 --- a/fs/timerfd.c +++ b/fs/timerfd.c @@ -200,7 +200,7 @@ SYSCALL_DEFINE2(timerfd_create, int, clockid, int, flags) hrtimer_init(&ctx->tmr, clockid, HRTIMER_MODE_ABS); ufd = anon_inode_getfd("[timerfd]", &timerfd_fops, ctx, - flags & TFD_SHARED_FCNTL_FLAGS); + O_RDWR | (flags & TFD_SHARED_FCNTL_FLAGS)); if (ufd < 0) kfree(ctx); diff --git a/kernel/perf_event.c b/kernel/perf_event.c index e0eb4a2fe183..1f38270f08c7 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -4724,7 +4724,7 @@ SYSCALL_DEFINE5(perf_event_open, if (IS_ERR(event)) goto err_put_context; - err = anon_inode_getfd("[perf_event]", &perf_fops, event, 0); + err = anon_inode_getfd("[perf_event]", &perf_fops, event, O_RDWR); if (err < 0) goto err_free_put_context; diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index e1f2bf8d7b1e..b5af88167613 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -1177,7 +1177,7 @@ static struct file_operations kvm_vcpu_fops = { */ static int create_vcpu_fd(struct kvm_vcpu *vcpu) { - return anon_inode_getfd("kvm-vcpu", &kvm_vcpu_fops, vcpu, 0); + return anon_inode_getfd("kvm-vcpu", &kvm_vcpu_fops, vcpu, O_RDWR); } /* @@ -1638,7 +1638,7 @@ static int kvm_dev_ioctl_create_vm(void) kvm = kvm_create_vm(); if (IS_ERR(kvm)) return PTR_ERR(kvm); - fd = anon_inode_getfd("kvm-vm", &kvm_vm_fops, kvm, 0); + fd = anon_inode_getfd("kvm-vm", &kvm_vm_fops, kvm, O_RDWR); if (fd < 0) kvm_put_kvm(kvm); -- GitLab From 482928d59db668b8d82a48717f78986d8cea72e9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 19 Dec 2009 10:10:39 -0500 Subject: [PATCH 500/618] Fix f_flags/f_mode in case of lookup_instantiate_filp() from open(pathname, 3) Just set f_flags when shoving struct file into nameidata; don't postpone that until __dentry_open(). do_filp_open() has correct value; lookup_instantiate_filp() doesn't - we lose the difference between O_RDWR and 3 by that point. We still set .intent.open.flags, so no fs code needs to be changed. Signed-off-by: Al Viro --- fs/internal.h | 7 +++++++ fs/namei.c | 6 ++++-- fs/open.c | 13 ++++++------- include/linux/namei.h | 2 -- 4 files changed, 17 insertions(+), 11 deletions(-) diff --git a/fs/internal.h b/fs/internal.h index f67cd141d9a8..e96a1667d749 100644 --- a/fs/internal.h +++ b/fs/internal.h @@ -85,3 +85,10 @@ extern struct file *get_empty_filp(void); * super.c */ extern int do_remount_sb(struct super_block *, int, void *, int); + +/* + * open.c + */ +struct nameidata; +extern struct file *nameidata_to_filp(struct nameidata *); +extern void release_open_intent(struct nameidata *); diff --git a/fs/namei.c b/fs/namei.c index dad4b80257db..d517f73aa36b 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1640,6 +1640,7 @@ struct file *do_filp_open(int dfd, const char *pathname, if (filp == NULL) return ERR_PTR(-ENFILE); nd.intent.open.file = filp; + filp->f_flags = open_flag; nd.intent.open.flags = flag; nd.intent.open.create_mode = 0; error = do_path_lookup(dfd, pathname, @@ -1685,6 +1686,7 @@ struct file *do_filp_open(int dfd, const char *pathname, if (filp == NULL) goto exit_parent; nd.intent.open.file = filp; + filp->f_flags = open_flag; nd.intent.open.flags = flag; nd.intent.open.create_mode = mode; dir = nd.path.dentry; @@ -1725,7 +1727,7 @@ struct file *do_filp_open(int dfd, const char *pathname, mnt_drop_write(nd.path.mnt); goto exit; } - filp = nameidata_to_filp(&nd, open_flag); + filp = nameidata_to_filp(&nd); mnt_drop_write(nd.path.mnt); if (nd.root.mnt) path_put(&nd.root); @@ -1789,7 +1791,7 @@ struct file *do_filp_open(int dfd, const char *pathname, mnt_drop_write(nd.path.mnt); goto exit; } - filp = nameidata_to_filp(&nd, open_flag); + filp = nameidata_to_filp(&nd); if (!IS_ERR(filp)) { error = ima_path_check(&filp->f_path, filp->f_mode & (MAY_READ | MAY_WRITE | MAY_EXEC)); diff --git a/fs/open.c b/fs/open.c index ca69241796bd..6daee28f6e8f 100644 --- a/fs/open.c +++ b/fs/open.c @@ -821,15 +821,14 @@ static inline int __get_file_write_access(struct inode *inode, } static struct file *__dentry_open(struct dentry *dentry, struct vfsmount *mnt, - int flags, struct file *f, + struct file *f, int (*open)(struct inode *, struct file *), const struct cred *cred) { struct inode *inode; int error; - f->f_flags = flags; - f->f_mode = (__force fmode_t)((flags+1) & O_ACCMODE) | FMODE_LSEEK | + f->f_mode = (__force fmode_t)((f->f_flags+1) & O_ACCMODE) | FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE; inode = dentry->d_inode; if (f->f_mode & FMODE_WRITE) { @@ -930,7 +929,6 @@ struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry if (IS_ERR(dentry)) goto out_err; nd->intent.open.file = __dentry_open(dget(dentry), mntget(nd->path.mnt), - nd->intent.open.flags - 1, nd->intent.open.file, open, cred); out: @@ -949,7 +947,7 @@ EXPORT_SYMBOL_GPL(lookup_instantiate_filp); * * Note that this function destroys the original nameidata */ -struct file *nameidata_to_filp(struct nameidata *nd, int flags) +struct file *nameidata_to_filp(struct nameidata *nd) { const struct cred *cred = current_cred(); struct file *filp; @@ -958,7 +956,7 @@ struct file *nameidata_to_filp(struct nameidata *nd, int flags) filp = nd->intent.open.file; /* Has the filesystem initialised the file for us? */ if (filp->f_path.dentry == NULL) - filp = __dentry_open(nd->path.dentry, nd->path.mnt, flags, filp, + filp = __dentry_open(nd->path.dentry, nd->path.mnt, filp, NULL, cred); else path_put(&nd->path); @@ -997,7 +995,8 @@ struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags, return ERR_PTR(error); } - return __dentry_open(dentry, mnt, flags, f, NULL, cred); + f->f_flags = flags; + return __dentry_open(dentry, mnt, f, NULL, cred); } EXPORT_SYMBOL(dentry_open); diff --git a/include/linux/namei.h b/include/linux/namei.h index 028946750289..05b441d93642 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -72,8 +72,6 @@ extern int vfs_path_lookup(struct dentry *, struct vfsmount *, extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry, int (*open)(struct inode *, struct file *)); -extern struct file *nameidata_to_filp(struct nameidata *nd, int flags); -extern void release_open_intent(struct nameidata *); extern struct dentry *lookup_one_len(const char *, struct dentry *, int); -- GitLab From 5300990c0370e804e49d9a59d928c5d53fb73487 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 19 Dec 2009 10:15:07 -0500 Subject: [PATCH 501/618] Sanitize f_flags helpers * pull ACC_MODE to fs.h; we have several copies all over the place * nightmarish expression calculating f_mode by f_flags deserves a helper too (OPEN_FMODE(flags)) Signed-off-by: Al Viro --- fs/anon_inodes.c | 10 +--------- fs/namei.c | 2 -- fs/open.c | 2 +- include/linux/fs.h | 3 +++ kernel/auditsc.c | 1 - security/tomoyo/file.c | 1 - 6 files changed, 5 insertions(+), 14 deletions(-) diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c index 598237e97221..9f0bf13291e5 100644 --- a/fs/anon_inodes.c +++ b/fs/anon_inodes.c @@ -89,19 +89,11 @@ struct file *anon_inode_getfile(const char *name, struct qstr this; struct path path; struct file *file; - fmode_t mode; int error; if (IS_ERR(anon_inode_inode)) return ERR_PTR(-ENODEV); - switch (flags & O_ACCMODE) { - case O_RDONLY: mode = FMODE_READ; break; - case O_WRONLY: mode = FMODE_WRITE; break; - case O_RDWR: mode = FMODE_READ | FMODE_WRITE; break; - default: return ERR_PTR(-EINVAL); - } - if (fops->owner && !try_module_get(fops->owner)) return ERR_PTR(-ENOENT); @@ -129,7 +121,7 @@ struct file *anon_inode_getfile(const char *name, d_instantiate(path.dentry, anon_inode_inode); error = -ENFILE; - file = alloc_file(&path, mode, fops); + file = alloc_file(&path, OPEN_FMODE(flags), fops); if (!file) goto err_dput; file->f_mapping = anon_inode_inode->i_mapping; diff --git a/fs/namei.c b/fs/namei.c index d517f73aa36b..68921d9b5302 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -37,8 +37,6 @@ #include "internal.h" -#define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE]) - /* [Feb-1997 T. Schoebel-Theuer] * Fundamental changes in the pathname lookup mechanisms (namei) * were necessary because of omirr. The reason is that omirr needs diff --git a/fs/open.c b/fs/open.c index 6daee28f6e8f..040cef72bc00 100644 --- a/fs/open.c +++ b/fs/open.c @@ -828,7 +828,7 @@ static struct file *__dentry_open(struct dentry *dentry, struct vfsmount *mnt, struct inode *inode; int error; - f->f_mode = (__force fmode_t)((f->f_flags+1) & O_ACCMODE) | FMODE_LSEEK | + f->f_mode = OPEN_FMODE(f->f_flags) | FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE; inode = dentry->d_inode; if (f->f_mode & FMODE_WRITE) { diff --git a/include/linux/fs.h b/include/linux/fs.h index cca191933ff6..9e13b533aaef 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2464,5 +2464,8 @@ int proc_nr_files(struct ctl_table *table, int write, int __init get_filesystem_list(char *buf); +#define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE]) +#define OPEN_FMODE(flag) ((__force fmode_t)((flag + 1) & O_ACCMODE)) + #endif /* __KERNEL__ */ #endif /* _LINUX_FS_H */ diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 267e484f0198..fc0f928167e7 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -250,7 +250,6 @@ struct audit_context { #endif }; -#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE]) static inline int open_arg(int flags, int mask) { int n = ACC_MODE(flags); diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c index 8346938809b1..9a6c58881c0a 100644 --- a/security/tomoyo/file.c +++ b/security/tomoyo/file.c @@ -12,7 +12,6 @@ #include "common.h" #include "tomoyo.h" #include "realpath.h" -#define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE]) /* * tomoyo_globally_readable_file_entry is a structure which is used for holding -- GitLab From 95ebc3a7930d5965b00bbedbf36bfd3eb9124d65 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Wed, 28 Oct 2009 01:46:33 +0100 Subject: [PATCH 502/618] Remove obsolete comment in fs.h This question was determined to be a bug which was fixed in commit 4a3b0a49. Signed-off-by: Andreas Gruenbacher Cc: Jan Blunck Signed-off-by: Al Viro --- include/linux/fs.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/linux/fs.h b/include/linux/fs.h index 9e13b533aaef..7e3012e0ac06 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1624,8 +1624,6 @@ struct super_operations { * on the bit address once it is done. * * Q: What is the difference between I_WILL_FREE and I_FREEING? - * Q: igrab() only checks on (I_FREEING|I_WILL_FREE). Should it also check on - * I_CLEAR? If not, why? */ #define I_DIRTY_SYNC 1 #define I_DIRTY_DATASYNC 2 -- GitLab From 28ba0ec64ca0f6ad2b0338ccec0b00a4e64e7a69 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 6 Nov 2009 11:31:06 +0000 Subject: [PATCH 503/618] jfs: Fix 32bit build warning loff_t is a type that isn't entirely dependant upon 32 v 64bit choice Signed-off-by: Alan Cox Signed-off-by: Al Viro --- fs/jfs/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/jfs/super.c b/fs/jfs/super.c index 2234c73fc577..d929a822a74e 100644 --- a/fs/jfs/super.c +++ b/fs/jfs/super.c @@ -524,7 +524,7 @@ static int jfs_fill_super(struct super_block *sb, void *data, int silent) * Page cache is indexed by long. * I would use MAX_LFS_FILESIZE, but it's only half as big */ - sb->s_maxbytes = min(((u64) PAGE_CACHE_SIZE << 32) - 1, sb->s_maxbytes); + sb->s_maxbytes = min(((u64) PAGE_CACHE_SIZE << 32) - 1, (u64)sb->s_maxbytes); #endif sb->s_time_gran = 1; return 0; -- GitLab From a6ab7aa9f432f722808c6fea5a8b7f5f229de031 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 22 Dec 2009 20:43:17 +0100 Subject: [PATCH 504/618] PM / Runtime: Use device type and device class callbacks The power management of some devices is handled through device types and device classes rather than through bus types. Since these devices may also benefit from using the run-time power management core, extend it so that the device type and device class run-time PM callbacks can be taken into consideration by it if the bus type callback is not defined. Update the run-time PM core documentation to reflect this change. Signed-off-by: Rafael J. Wysocki --- Documentation/power/runtime_pm.txt | 173 +++++++++++++++-------------- drivers/base/power/runtime.c | 45 ++++++++ 2 files changed, 132 insertions(+), 86 deletions(-) diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 4a3109b28847..7b5ab2701247 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -42,80 +42,81 @@ struct dev_pm_ops { ... }; -The ->runtime_suspend() callback is executed by the PM core for the bus type of -the device being suspended. The bus type's callback is then _entirely_ -_responsible_ for handling the device as appropriate, which may, but need not -include executing the device driver's own ->runtime_suspend() callback (from the +The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks are +executed by the PM core for either the bus type, or device type (if the bus +type's callback is not defined), or device class (if the bus type's and device +type's callbacks are not defined) of given device. The bus type, device type +and device class callbacks are referred to as subsystem-level callbacks in what +follows. + +The subsystem-level suspend callback is _entirely_ _responsible_ for handling +the suspend of the device as appropriate, which may, but need not include +executing the device driver's own ->runtime_suspend() callback (from the PM core's point of view it is not necessary to implement a ->runtime_suspend() -callback in a device driver as long as the bus type's ->runtime_suspend() knows -what to do to handle the device). +callback in a device driver as long as the subsystem-level suspend callback +knows what to do to handle the device). - * Once the bus type's ->runtime_suspend() callback has completed successfully + * Once the subsystem-level suspend callback has completed successfully for given device, the PM core regards the device as suspended, which need not mean that the device has been put into a low power state. It is supposed to mean, however, that the device will not process data and will - not communicate with the CPU(s) and RAM until its bus type's - ->runtime_resume() callback is executed for it. The run-time PM status of - a device after successful execution of its bus type's ->runtime_suspend() - callback is 'suspended'. - - * If the bus type's ->runtime_suspend() callback returns -EBUSY or -EAGAIN, - the device's run-time PM status is supposed to be 'active', which means that - the device _must_ be fully operational afterwards. - - * If the bus type's ->runtime_suspend() callback returns an error code - different from -EBUSY or -EAGAIN, the PM core regards this as a fatal - error and will refuse to run the helper functions described in Section 4 - for the device, until the status of it is directly set either to 'active' - or to 'suspended' (the PM core provides special helper functions for this - purpose). - -In particular, if the driver requires remote wakeup capability for proper -functioning and device_run_wake() returns 'false' for the device, then -->runtime_suspend() should return -EBUSY. On the other hand, if -device_run_wake() returns 'true' for the device and the device is put -into a low power state during the execution of its bus type's -->runtime_suspend(), it is expected that remote wake-up (i.e. hardware mechanism -allowing the device to request a change of its power state, such as PCI PME) -will be enabled for the device. Generally, remote wake-up should be enabled -for all input devices put into a low power state at run time. - -The ->runtime_resume() callback is executed by the PM core for the bus type of -the device being woken up. The bus type's callback is then _entirely_ -_responsible_ for handling the device as appropriate, which may, but need not -include executing the device driver's own ->runtime_resume() callback (from the -PM core's point of view it is not necessary to implement a ->runtime_resume() -callback in a device driver as long as the bus type's ->runtime_resume() knows -what to do to handle the device). - - * Once the bus type's ->runtime_resume() callback has completed successfully, - the PM core regards the device as fully operational, which means that the - device _must_ be able to complete I/O operations as needed. The run-time - PM status of the device is then 'active'. - - * If the bus type's ->runtime_resume() callback returns an error code, the PM - core regards this as a fatal error and will refuse to run the helper - functions described in Section 4 for the device, until its status is - directly set either to 'active' or to 'suspended' (the PM core provides - special helper functions for this purpose). - -The ->runtime_idle() callback is executed by the PM core for the bus type of -given device whenever the device appears to be idle, which is indicated to the -PM core by two counters, the device's usage counter and the counter of 'active' -children of the device. + not communicate with the CPU(s) and RAM until the subsystem-level resume + callback is executed for it. The run-time PM status of a device after + successful execution of the subsystem-level suspend callback is 'suspended'. + + * If the subsystem-level suspend callback returns -EBUSY or -EAGAIN, + the device's run-time PM status is 'active', which means that the device + _must_ be fully operational afterwards. + + * If the subsystem-level suspend callback returns an error code different + from -EBUSY or -EAGAIN, the PM core regards this as a fatal error and will + refuse to run the helper functions described in Section 4 for the device, + until the status of it is directly set either to 'active', or to 'suspended' + (the PM core provides special helper functions for this purpose). + +In particular, if the driver requires remote wake-up capability (i.e. hardware +mechanism allowing the device to request a change of its power state, such as +PCI PME) for proper functioning and device_run_wake() returns 'false' for the +device, then ->runtime_suspend() should return -EBUSY. On the other hand, if +device_run_wake() returns 'true' for the device and the device is put into a low +power state during the execution of the subsystem-level suspend callback, it is +expected that remote wake-up will be enabled for the device. Generally, remote +wake-up should be enabled for all input devices put into a low power state at +run time. + +The subsystem-level resume callback is _entirely_ _responsible_ for handling the +resume of the device as appropriate, which may, but need not include executing +the device driver's own ->runtime_resume() callback (from the PM core's point of +view it is not necessary to implement a ->runtime_resume() callback in a device +driver as long as the subsystem-level resume callback knows what to do to handle +the device). + + * Once the subsystem-level resume callback has completed successfully, the PM + core regards the device as fully operational, which means that the device + _must_ be able to complete I/O operations as needed. The run-time PM status + of the device is then 'active'. + + * If the subsystem-level resume callback returns an error code, the PM core + regards this as a fatal error and will refuse to run the helper functions + described in Section 4 for the device, until its status is directly set + either to 'active' or to 'suspended' (the PM core provides special helper + functions for this purpose). + +The subsystem-level idle callback is executed by the PM core whenever the device +appears to be idle, which is indicated to the PM core by two counters, the +device's usage counter and the counter of 'active' children of the device. * If any of these counters is decreased using a helper function provided by the PM core and it turns out to be equal to zero, the other counter is checked. If that counter also is equal to zero, the PM core executes the - device bus type's ->runtime_idle() callback (with the device as an - argument). + subsystem-level idle callback with the device as an argument. -The action performed by a bus type's ->runtime_idle() callback is totally -dependent on the bus type in question, but the expected and recommended action -is to check if the device can be suspended (i.e. if all of the conditions -necessary for suspending the device are satisfied) and to queue up a suspend -request for the device in that case. The value returned by this callback is -ignored by the PM core. +The action performed by a subsystem-level idle callback is totally dependent on +the subsystem in question, but the expected and recommended action is to check +if the device can be suspended (i.e. if all of the conditions necessary for +suspending the device are satisfied) and to queue up a suspend request for the +device in that case. The value returned by this callback is ignored by the PM +core. The helper functions provided by the PM core, described in Section 4, guarantee that the following constraints are met with respect to the bus type's run-time @@ -238,41 +239,41 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: removing the device from device hierarchy int pm_runtime_idle(struct device *dev); - - execute ->runtime_idle() for the device's bus type; returns 0 on success - or error code on failure, where -EINPROGRESS means that ->runtime_idle() - is already being executed + - execute the subsystem-level idle callback for the device; returns 0 on + success or error code on failure, where -EINPROGRESS means that + ->runtime_idle() is already being executed int pm_runtime_suspend(struct device *dev); - - execute ->runtime_suspend() for the device's bus type; returns 0 on + - execute the subsystem-level suspend callback for the device; returns 0 on success, 1 if the device's run-time PM status was already 'suspended', or error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt to suspend the device again in future int pm_runtime_resume(struct device *dev); - - execute ->runtime_resume() for the device's bus type; returns 0 on + - execute the subsystem-leve resume callback for the device; returns 0 on success, 1 if the device's run-time PM status was already 'active' or error code on failure, where -EAGAIN means it may be safe to attempt to resume the device again in future, but 'power.runtime_error' should be checked additionally int pm_request_idle(struct device *dev); - - submit a request to execute ->runtime_idle() for the device's bus type - (the request is represented by a work item in pm_wq); returns 0 on success - or error code if the request has not been queued up + - submit a request to execute the subsystem-level idle callback for the + device (the request is represented by a work item in pm_wq); returns 0 on + success or error code if the request has not been queued up int pm_schedule_suspend(struct device *dev, unsigned int delay); - - schedule the execution of ->runtime_suspend() for the device's bus type - in future, where 'delay' is the time to wait before queuing up a suspend - work item in pm_wq, in milliseconds (if 'delay' is zero, the work item is - queued up immediately); returns 0 on success, 1 if the device's PM + - schedule the execution of the subsystem-level suspend callback for the + device in future, where 'delay' is the time to wait before queuing up a + suspend work item in pm_wq, in milliseconds (if 'delay' is zero, the work + item is queued up immediately); returns 0 on success, 1 if the device's PM run-time status was already 'suspended', or error code if the request hasn't been scheduled (or queued up if 'delay' is 0); if the execution of ->runtime_suspend() is already scheduled and not yet expired, the new value of 'delay' will be used as the time to wait int pm_request_resume(struct device *dev); - - submit a request to execute ->runtime_resume() for the device's bus type - (the request is represented by a work item in pm_wq); returns 0 on + - submit a request to execute the subsystem-level resume callback for the + device (the request is represented by a work item in pm_wq); returns 0 on success, 1 if the device's run-time PM status was already 'active', or error code if the request hasn't been queued up @@ -303,12 +304,12 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: run-time PM callbacks described in Section 2 int pm_runtime_disable(struct device *dev); - - prevent the run-time PM helper functions from running the device bus - type's run-time PM callbacks, make sure that all of the pending run-time - PM operations on the device are either completed or canceled; returns - 1 if there was a resume request pending and it was necessary to execute - ->runtime_resume() for the device's bus type to satisfy that request, - otherwise 0 is returned + - prevent the run-time PM helper functions from running subsystem-level + run-time PM callbacks for the device, make sure that all of the pending + run-time PM operations on the device are either completed or canceled; + returns 1 if there was a resume request pending and it was necessary to + execute the subsystem-level resume callback for the device to satisfy that + request, otherwise 0 is returned void pm_suspend_ignore_children(struct device *dev, bool enable); - set/unset the power.ignore_children flag of the device @@ -378,5 +379,5 @@ pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts, they will fail returning -EAGAIN, because the device's usage counter is incremented by the core before executing ->probe() and ->remove(). Still, it may be desirable to suspend the device as soon as ->probe() or ->remove() has -finished, so the PM core uses pm_runtime_idle_sync() to invoke the device bus -type's ->runtime_idle() callback at that time. +finished, so the PM core uses pm_runtime_idle_sync() to invoke the +subsystem-level idle callback for the device at that time. diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 40d7720a4b21..f8b044e8aef7 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -84,6 +84,19 @@ static int __pm_runtime_idle(struct device *dev) dev->bus->pm->runtime_idle(dev); + spin_lock_irq(&dev->power.lock); + } else if (dev->type && dev->type->pm && dev->type->pm->runtime_idle) { + spin_unlock_irq(&dev->power.lock); + + dev->type->pm->runtime_idle(dev); + + spin_lock_irq(&dev->power.lock); + } else if (dev->class && dev->class->pm + && dev->class->pm->runtime_idle) { + spin_unlock_irq(&dev->power.lock); + + dev->class->pm->runtime_idle(dev); + spin_lock_irq(&dev->power.lock); } @@ -192,6 +205,22 @@ int __pm_runtime_suspend(struct device *dev, bool from_wq) retval = dev->bus->pm->runtime_suspend(dev); + spin_lock_irq(&dev->power.lock); + dev->power.runtime_error = retval; + } else if (dev->type && dev->type->pm + && dev->type->pm->runtime_suspend) { + spin_unlock_irq(&dev->power.lock); + + retval = dev->type->pm->runtime_suspend(dev); + + spin_lock_irq(&dev->power.lock); + dev->power.runtime_error = retval; + } else if (dev->class && dev->class->pm + && dev->class->pm->runtime_suspend) { + spin_unlock_irq(&dev->power.lock); + + retval = dev->class->pm->runtime_suspend(dev); + spin_lock_irq(&dev->power.lock); dev->power.runtime_error = retval; } else { @@ -357,6 +386,22 @@ int __pm_runtime_resume(struct device *dev, bool from_wq) retval = dev->bus->pm->runtime_resume(dev); + spin_lock_irq(&dev->power.lock); + dev->power.runtime_error = retval; + } else if (dev->type && dev->type->pm + && dev->type->pm->runtime_resume) { + spin_unlock_irq(&dev->power.lock); + + retval = dev->type->pm->runtime_resume(dev); + + spin_lock_irq(&dev->power.lock); + dev->power.runtime_error = retval; + } else if (dev->class && dev->class->pm + && dev->class->pm->runtime_resume) { + spin_unlock_irq(&dev->power.lock); + + retval = dev->class->pm->runtime_resume(dev); + spin_lock_irq(&dev->power.lock); dev->power.runtime_error = retval; } else { -- GitLab From f1212ae1332b95fe3bafa7b5c063dd8e473247cf Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Dec 2009 20:43:40 +0100 Subject: [PATCH 505/618] PM: Runtime PM documentation update This patch (as1318) updates the runtime PM documentation, adding a section discussing the interaction between runtime PM and system sleep. [rjw: Rebased and made it agree with the other updates better.] Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki --- Documentation/power/runtime_pm.txt | 50 ++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 7b5ab2701247..356fd86f4ea8 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -381,3 +381,53 @@ incremented by the core before executing ->probe() and ->remove(). Still, it may be desirable to suspend the device as soon as ->probe() or ->remove() has finished, so the PM core uses pm_runtime_idle_sync() to invoke the subsystem-level idle callback for the device at that time. + +6. Run-time PM and System Sleep + +Run-time PM and system sleep (i.e., system suspend and hibernation, also known +as suspend-to-RAM and suspend-to-disk) interact with each other in a couple of +ways. If a device is active when a system sleep starts, everything is +straightforward. But what should happen if the device is already suspended? + +The device may have different wake-up settings for run-time PM and system sleep. +For example, remote wake-up may be enabled for run-time suspend but disallowed +for system sleep (device_may_wakeup(dev) returns 'false'). When this happens, +the subsystem-level system suspend callback is responsible for changing the +device's wake-up setting (it may leave that to the device driver's system +suspend routine). It may be necessary to resume the device and suspend it again +in order to do so. The same is true if the driver uses different power levels +or other settings for run-time suspend and system sleep. + +During system resume, devices generally should be brought back to full power, +even if they were suspended before the system sleep began. There are several +reasons for this, including: + + * The device might need to switch power levels, wake-up settings, etc. + + * Remote wake-up events might have been lost by the firmware. + + * The device's children may need the device to be at full power in order + to resume themselves. + + * The driver's idea of the device state may not agree with the device's + physical state. This can happen during resume from hibernation. + + * The device might need to be reset. + + * Even though the device was suspended, if its usage counter was > 0 then most + likely it would need a run-time resume in the near future anyway. + + * Always going back to full power is simplest. + +If the device was suspended before the sleep began, then its run-time PM status +will have to be updated to reflect the actual post-system sleep status. The way +to do this is: + + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + +The PM core always increments the run-time usage counter before calling the +->prepare() callback and decrements it after calling the ->complete() callback. +Hence disabling run-time PM temporarily like this will not cause any run-time +suspend callbacks to be lost. -- GitLab From 83f57a11d84460dfe2afdb5a8bc759953428e38b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 22 Dec 2009 14:10:37 -0800 Subject: [PATCH 506/618] Revert "time: Remove xtime_cache" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 7bc7d637452383d56ba4368d4336b0dde1bb476d, as requested by John Stultz. Quoting John: "Petr TitÄ›ra reported an issue where he saw odd atime regressions with 2.6.33 where there were a full second worth of nanoseconds in the nanoseconds field. He also reviewed the time code and narrowed down the problem: unhandled overflow of the nanosecond field caused by rounding up the sub-nanosecond accumulated time. Details: * At the end of update_wall_time(), we currently round up the sub-nanosecond portion of accumulated time when storing it into xtime. This was added to avoid time inconsistencies caused when the sub-nanosecond portion was truncated when storing into xtime. Unfortunately we don't handle the possible second overflow caused by that rounding. * Previously the xtime_cache code hid this overflow by normalizing the xtime value when storing into the xtime_cache. * We could try to handle the second overflow after the rounding up, but since this affects the timekeeping's internal state, this would further complicate the next accumulation cycle, causing small errors in ntp steering. As much as I'd like to get rid of it, the xtime_cache code is known to work. * The correct fix is really to include the sub-nanosecond portion in the timekeeping accessor function, so we don't need to round up at during accumulation. This would greatly simplify the accumulation code. Unfortunately, we can't do this safely until the last three non-GENERIC_TIME arches (sparc32, arm, cris) are converted (those patches are in -mm) and we kill off the spots where arches set xtime directly. This is all 2.6.34 material, so I think reverting the xtime_cache change is the best approach for now. Many thanks to Petr for both reporting and finding the issue!" Reported-by: Petr TitÄ›ra Requested-by: john stultz Cc: Ingo Molnar Signed-off-by: Linus Torvalds --- kernel/time.c | 1 + kernel/time/timekeeping.c | 27 +++++++++++++++++++++++---- 2 files changed, 24 insertions(+), 4 deletions(-) diff --git a/kernel/time.c b/kernel/time.c index c6324d96009e..804798005d19 100644 --- a/kernel/time.c +++ b/kernel/time.c @@ -136,6 +136,7 @@ static inline void warp_clock(void) write_seqlock_irq(&xtime_lock); wall_to_monotonic.tv_sec -= sys_tz.tz_minuteswest * 60; xtime.tv_sec += sys_tz.tz_minuteswest * 60; + update_xtime_cache(0); write_sequnlock_irq(&xtime_lock); clock_was_set(); } diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index af4135f05825..7faaa32fbf4f 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -165,6 +165,13 @@ struct timespec raw_time; /* flag for if timekeeping is suspended */ int __read_mostly timekeeping_suspended; +static struct timespec xtime_cache __attribute__ ((aligned (16))); +void update_xtime_cache(u64 nsec) +{ + xtime_cache = xtime; + timespec_add_ns(&xtime_cache, nsec); +} + /* must hold xtime_lock */ void timekeeping_leap_insert(int leapsecond) { @@ -325,6 +332,8 @@ int do_settimeofday(struct timespec *tv) xtime = *tv; + update_xtime_cache(0); + timekeeper.ntp_error = 0; ntp_clear(); @@ -550,6 +559,7 @@ void __init timekeeping_init(void) } set_normalized_timespec(&wall_to_monotonic, -boot.tv_sec, -boot.tv_nsec); + update_xtime_cache(0); total_sleep_time.tv_sec = 0; total_sleep_time.tv_nsec = 0; write_sequnlock_irqrestore(&xtime_lock, flags); @@ -583,6 +593,7 @@ static int timekeeping_resume(struct sys_device *dev) wall_to_monotonic = timespec_sub(wall_to_monotonic, ts); total_sleep_time = timespec_add_safe(total_sleep_time, ts); } + update_xtime_cache(0); /* re-base the last cycle value */ timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock); timekeeper.ntp_error = 0; @@ -722,6 +733,7 @@ static void timekeeping_adjust(s64 offset) timekeeper.ntp_error_shift; } + /** * logarithmic_accumulation - shifted accumulation of cycles * @@ -765,6 +777,7 @@ static cycle_t logarithmic_accumulation(cycle_t offset, int shift) return offset; } + /** * update_wall_time - Uses the current clocksource to increment the wall time * @@ -774,6 +787,7 @@ void update_wall_time(void) { struct clocksource *clock; cycle_t offset; + u64 nsecs; int shift = 0, maxshift; /* Make sure we're fully resumed: */ @@ -839,6 +853,9 @@ void update_wall_time(void) timekeeper.ntp_error += timekeeper.xtime_nsec << timekeeper.ntp_error_shift; + nsecs = clocksource_cyc2ns(offset, timekeeper.mult, timekeeper.shift); + update_xtime_cache(nsecs); + /* check to see if there is a new clocksource to use */ update_vsyscall(&xtime, timekeeper.clock, timekeeper.mult); } @@ -875,13 +892,13 @@ void monotonic_to_bootbased(struct timespec *ts) unsigned long get_seconds(void) { - return xtime.tv_sec; + return xtime_cache.tv_sec; } EXPORT_SYMBOL(get_seconds); struct timespec __current_kernel_time(void) { - return xtime; + return xtime_cache; } struct timespec current_kernel_time(void) @@ -891,7 +908,8 @@ struct timespec current_kernel_time(void) do { seq = read_seqbegin(&xtime_lock); - now = xtime; + + now = xtime_cache; } while (read_seqretry(&xtime_lock, seq)); return now; @@ -905,7 +923,8 @@ struct timespec get_monotonic_coarse(void) do { seq = read_seqbegin(&xtime_lock); - now = xtime; + + now = xtime_cache; mono = wall_to_monotonic; } while (read_seqretry(&xtime_lock, seq)); -- GitLab From a6cd13f3c98d1d16213e3b61054b9c209d93f877 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 21 Dec 2009 14:37:22 -0800 Subject: [PATCH 507/618] lib/string.c: fix kernel-doc warnings Fix kernel-doc warnings (@arg name) in string.c::skip_spaces(). Warning(lib/string.c:347): No description found for parameter 'str' Warning(lib/string.c:347): Excess function parameter 's' description in 'skip_spaces' Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/string.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lib/string.c b/lib/string.c index afce96af3afd..9f75b4ec50b8 100644 --- a/lib/string.c +++ b/lib/string.c @@ -338,10 +338,10 @@ EXPORT_SYMBOL(strnchr); #endif /** - * skip_spaces - Removes leading whitespace from @s. - * @s: The string to be stripped. + * skip_spaces - Removes leading whitespace from @str. + * @str: The string to be stripped. * - * Returns a pointer to the first non-whitespace character in @s. + * Returns a pointer to the first non-whitespace character in @str. */ char *skip_spaces(const char *str) { -- GitLab From 2ec91eec47f713e3d158ba5b28a24a85a2cf3650 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 21 Dec 2009 14:37:23 -0800 Subject: [PATCH 508/618] mm tracing: cleanup Documentation/trace/events-kmem.txt Clean up typos/grammos/spellos in events-kmem.txt. Signed-off-by: Randy Dunlap Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/trace/events-kmem.txt | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/trace/events-kmem.txt b/Documentation/trace/events-kmem.txt index 6ef2a8652e17..aa82ee4a5a87 100644 --- a/Documentation/trace/events-kmem.txt +++ b/Documentation/trace/events-kmem.txt @@ -1,7 +1,7 @@ Subsystem Trace Points: kmem -The tracing system kmem captures events related to object and page allocation -within the kernel. Broadly speaking there are four major subheadings. +The kmem tracing system captures events related to object and page allocation +within the kernel. Broadly speaking there are five major subheadings. o Slab allocation of small objects of unknown type (kmalloc) o Slab allocation of small objects of known type @@ -9,7 +9,7 @@ within the kernel. Broadly speaking there are four major subheadings. o Per-CPU Allocator Activity o External Fragmentation -This document will describe what each of the tracepoints are and why they +This document describes what each of the tracepoints is and why they might be useful. 1. Slab allocation of small objects of unknown type @@ -34,7 +34,7 @@ kmem_cache_free call_site=%lx ptr=%p These events are similar in usage to the kmalloc-related events except that it is likely easier to pin the event down to a specific cache. At the time of writing, no information is available on what slab is being allocated from, -but the call_site can usually be used to extrapolate that information +but the call_site can usually be used to extrapolate that information. 3. Page allocation ================== @@ -80,9 +80,9 @@ event indicating whether it is for a percpu_refill or not. When the per-CPU list is too full, a number of pages are freed, each one which triggers a mm_page_pcpu_drain event. -The individual nature of the events are so that pages can be tracked +The individual nature of the events is so that pages can be tracked between allocation and freeing. A number of drain or refill pages that occur -consecutively imply the zone->lock being taken once. Large amounts of PCP +consecutively imply the zone->lock being taken once. Large amounts of per-CPU refills and drains could imply an imbalance between CPUs where too much work is being concentrated in one place. It could also indicate that the per-CPU lists should be a larger size. Finally, large amounts of refills on one CPU @@ -102,6 +102,6 @@ is important. Large numbers of this event implies that memory is fragmenting and high-order allocations will start failing at some time in the future. One -means of reducing the occurange of this event is to increase the size of +means of reducing the occurrence of this event is to increase the size of min_free_kbytes in increments of 3*pageblock_size*nr_online_nodes where pageblock_size is usually the size of the default hugepage size. -- GitLab From 45465487897a1c6d508b14b904dc5777f7ec7e04 Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Mon, 21 Dec 2009 14:37:26 -0800 Subject: [PATCH 509/618] kfifo: move struct kfifo in place This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: Stefani Seibold Acked-by: Greg Kroah-Hartman Acked-by: Mauro Carvalho Chehab Acked-by: Andi Kleen Acked-by: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/nozomi.c | 21 ++++--- drivers/char/sonypi.c | 40 ++++++------- drivers/infiniband/hw/cxgb3/cxio_hal.h | 9 +-- drivers/infiniband/hw/cxgb3/cxio_resource.c | 60 +++++++++---------- drivers/media/video/meye.c | 48 ++++++++------- drivers/media/video/meye.h | 4 +- drivers/net/wireless/libertas/cmd.c | 4 +- drivers/net/wireless/libertas/dev.h | 4 +- drivers/net/wireless/libertas/main.c | 16 +++-- drivers/platform/x86/fujitsu-laptop.c | 18 +++--- drivers/platform/x86/sony-laptop.c | 46 +++++++-------- drivers/scsi/libiscsi.c | 22 +++---- drivers/scsi/libiscsi_tcp.c | 29 +++++---- drivers/scsi/libsrp.c | 13 ++--- drivers/usb/host/fhci-sched.c | 10 ++-- drivers/usb/host/fhci-tds.c | 35 ++++++----- drivers/usb/host/fhci.h | 10 ++-- drivers/usb/serial/usb-serial.c | 5 +- include/linux/kfifo.h | 11 ++-- include/scsi/libiscsi.h | 3 +- include/scsi/libiscsi_tcp.h | 2 +- include/scsi/libsrp.h | 2 +- kernel/kfifo.c | 65 +++++++++++---------- net/dccp/probe.c | 20 +++---- 24 files changed, 238 insertions(+), 259 deletions(-) diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index d3400b20444f..0f39bec28b45 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -358,7 +358,7 @@ struct port { u8 update_flow_control; struct ctrl_ul ctrl_ul; struct ctrl_dl ctrl_dl; - struct kfifo *fifo_ul; + struct kfifo fifo_ul; void __iomem *dl_addr[2]; u32 dl_size[2]; u8 toggle_dl; @@ -685,8 +685,8 @@ static int nozomi_read_config_table(struct nozomi *dc) dump_table(dc); for (i = PORT_MDM; i < MAX_PORT; i++) { - dc->port[i].fifo_ul = - kfifo_alloc(FIFO_BUFFER_SIZE_UL, GFP_ATOMIC, NULL); + kfifo_alloc(&dc->port[i].fifo_ul, + FIFO_BUFFER_SIZE_UL, GFP_ATOMIC, NULL); memset(&dc->port[i].ctrl_dl, 0, sizeof(struct ctrl_dl)); memset(&dc->port[i].ctrl_ul, 0, sizeof(struct ctrl_ul)); } @@ -798,7 +798,7 @@ static int send_data(enum port_type index, struct nozomi *dc) struct tty_struct *tty = tty_port_tty_get(&port->port); /* Get data from tty and place in buf for now */ - size = __kfifo_get(port->fifo_ul, dc->send_buf, + size = __kfifo_get(&port->fifo_ul, dc->send_buf, ul_size < SEND_BUF_MAX ? ul_size : SEND_BUF_MAX); if (size == 0) { @@ -988,11 +988,11 @@ static int receive_flow_control(struct nozomi *dc) } else if (old_ctrl.CTS == 0 && ctrl_dl.CTS == 1) { - if (__kfifo_len(dc->port[port].fifo_ul)) { + if (__kfifo_len(&dc->port[port].fifo_ul)) { DBG1("Enable interrupt (0x%04X) on port: %d", enable_ier, port); DBG1("Data in buffer [%d], enable transmit! ", - __kfifo_len(dc->port[port].fifo_ul)); + __kfifo_len(&dc->port[port].fifo_ul)); enable_transmit_ul(port, dc); } else { DBG1("No data in buffer..."); @@ -1536,8 +1536,7 @@ static void __devexit nozomi_card_exit(struct pci_dev *pdev) free_irq(pdev->irq, dc); for (i = 0; i < MAX_PORT; i++) - if (dc->port[i].fifo_ul) - kfifo_free(dc->port[i].fifo_ul); + kfifo_free(&dc->port[i].fifo_ul); kfree(dc->send_buf); @@ -1673,7 +1672,7 @@ static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, goto exit; } - rval = __kfifo_put(port->fifo_ul, (unsigned char *)buffer, count); + rval = __kfifo_put(&port->fifo_ul, (unsigned char *)buffer, count); /* notify card */ if (unlikely(dc == NULL)) { @@ -1721,7 +1720,7 @@ static int ntty_write_room(struct tty_struct *tty) if (!port->port.count) goto exit; - room = port->fifo_ul->size - __kfifo_len(port->fifo_ul); + room = port->fifo_ul.size - __kfifo_len(&port->fifo_ul); exit: mutex_unlock(&port->tty_sem); @@ -1878,7 +1877,7 @@ static s32 ntty_chars_in_buffer(struct tty_struct *tty) goto exit_in_buffer; } - rval = __kfifo_len(port->fifo_ul); + rval = __kfifo_len(&port->fifo_ul); exit_in_buffer: return rval; diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 8c262aaf7c26..9e6efb1f029f 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -487,7 +487,7 @@ static struct sonypi_device { int camera_power; int bluetooth_power; struct mutex lock; - struct kfifo *fifo; + struct kfifo fifo; spinlock_t fifo_lock; wait_queue_head_t fifo_proc_list; struct fasync_struct *fifo_async; @@ -496,7 +496,7 @@ static struct sonypi_device { struct input_dev *input_jog_dev; struct input_dev *input_key_dev; struct work_struct input_work; - struct kfifo *input_fifo; + struct kfifo input_fifo; spinlock_t input_fifo_lock; } sonypi_device; @@ -777,7 +777,7 @@ static void input_keyrelease(struct work_struct *work) { struct sonypi_keypress kp; - while (kfifo_get(sonypi_device.input_fifo, (unsigned char *)&kp, + while (kfifo_get(&sonypi_device.input_fifo, (unsigned char *)&kp, sizeof(kp)) == sizeof(kp)) { msleep(10); input_report_key(kp.dev, kp.key, 0); @@ -827,7 +827,7 @@ static void sonypi_report_input_event(u8 event) if (kp.dev) { input_report_key(kp.dev, kp.key, 1); input_sync(kp.dev); - kfifo_put(sonypi_device.input_fifo, + kfifo_put(&sonypi_device.input_fifo, (unsigned char *)&kp, sizeof(kp)); schedule_work(&sonypi_device.input_work); } @@ -880,7 +880,7 @@ static irqreturn_t sonypi_irq(int irq, void *dev_id) acpi_bus_generate_proc_event(sonypi_acpi_device, 1, event); #endif - kfifo_put(sonypi_device.fifo, (unsigned char *)&event, sizeof(event)); + kfifo_put(&sonypi_device.fifo, (unsigned char *)&event, sizeof(event)); kill_fasync(&sonypi_device.fifo_async, SIGIO, POLL_IN); wake_up_interruptible(&sonypi_device.fifo_proc_list); @@ -906,7 +906,7 @@ static int sonypi_misc_open(struct inode *inode, struct file *file) mutex_lock(&sonypi_device.lock); /* Flush input queue on first open */ if (!sonypi_device.open_count) - kfifo_reset(sonypi_device.fifo); + kfifo_reset(&sonypi_device.fifo); sonypi_device.open_count++; mutex_unlock(&sonypi_device.lock); unlock_kernel(); @@ -919,17 +919,17 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, ssize_t ret; unsigned char c; - if ((kfifo_len(sonypi_device.fifo) == 0) && + if ((kfifo_len(&sonypi_device.fifo) == 0) && (file->f_flags & O_NONBLOCK)) return -EAGAIN; ret = wait_event_interruptible(sonypi_device.fifo_proc_list, - kfifo_len(sonypi_device.fifo) != 0); + kfifo_len(&sonypi_device.fifo) != 0); if (ret) return ret; while (ret < count && - (kfifo_get(sonypi_device.fifo, &c, sizeof(c)) == sizeof(c))) { + (kfifo_get(&sonypi_device.fifo, &c, sizeof(c)) == sizeof(c))) { if (put_user(c, buf++)) return -EFAULT; ret++; @@ -946,7 +946,7 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, static unsigned int sonypi_misc_poll(struct file *file, poll_table *wait) { poll_wait(file, &sonypi_device.fifo_proc_list, wait); - if (kfifo_len(sonypi_device.fifo)) + if (kfifo_len(&sonypi_device.fifo)) return POLLIN | POLLRDNORM; return 0; } @@ -1313,11 +1313,11 @@ static int __devinit sonypi_probe(struct platform_device *dev) "http://www.linux.it/~malattia/wiki/index.php/Sony_drivers\n"); spin_lock_init(&sonypi_device.fifo_lock); - sonypi_device.fifo = kfifo_alloc(SONYPI_BUF_SIZE, GFP_KERNEL, + error = kfifo_alloc(&sonypi_device.fifo, SONYPI_BUF_SIZE, GFP_KERNEL, &sonypi_device.fifo_lock); - if (IS_ERR(sonypi_device.fifo)) { + if (error) { printk(KERN_ERR "sonypi: kfifo_alloc failed\n"); - return PTR_ERR(sonypi_device.fifo); + return error; } init_waitqueue_head(&sonypi_device.fifo_proc_list); @@ -1393,12 +1393,10 @@ static int __devinit sonypi_probe(struct platform_device *dev) } spin_lock_init(&sonypi_device.input_fifo_lock); - sonypi_device.input_fifo = - kfifo_alloc(SONYPI_BUF_SIZE, GFP_KERNEL, - &sonypi_device.input_fifo_lock); - if (IS_ERR(sonypi_device.input_fifo)) { + error = kfifo_alloc(&sonypi_device.input_fifo, SONYPI_BUF_SIZE, + GFP_KERNEL, &sonypi_device.input_fifo_lock); + if (error) { printk(KERN_ERR "sonypi: kfifo_alloc failed\n"); - error = PTR_ERR(sonypi_device.input_fifo); goto err_inpdev_unregister; } @@ -1423,7 +1421,7 @@ static int __devinit sonypi_probe(struct platform_device *dev) pci_disable_device(pcidev); err_put_pcidev: pci_dev_put(pcidev); - kfifo_free(sonypi_device.fifo); + kfifo_free(&sonypi_device.fifo); return error; } @@ -1438,7 +1436,7 @@ static int __devexit sonypi_remove(struct platform_device *dev) if (useinput) { input_unregister_device(sonypi_device.input_key_dev); input_unregister_device(sonypi_device.input_jog_dev); - kfifo_free(sonypi_device.input_fifo); + kfifo_free(&sonypi_device.input_fifo); } misc_deregister(&sonypi_misc_device); @@ -1451,7 +1449,7 @@ static int __devexit sonypi_remove(struct platform_device *dev) pci_dev_put(sonypi_device.dev); } - kfifo_free(sonypi_device.fifo); + kfifo_free(&sonypi_device.fifo); return 0; } diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.h b/drivers/infiniband/hw/cxgb3/cxio_hal.h index bfd03bf8be54..f3d440cc68f2 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.h +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.h @@ -34,6 +34,7 @@ #include #include +#include #include "t3_cpl.h" #include "t3cdev.h" @@ -75,13 +76,13 @@ struct cxio_hal_ctrl_qp { }; struct cxio_hal_resource { - struct kfifo *tpt_fifo; + struct kfifo tpt_fifo; spinlock_t tpt_fifo_lock; - struct kfifo *qpid_fifo; + struct kfifo qpid_fifo; spinlock_t qpid_fifo_lock; - struct kfifo *cqid_fifo; + struct kfifo cqid_fifo; spinlock_t cqid_fifo_lock; - struct kfifo *pdid_fifo; + struct kfifo pdid_fifo; spinlock_t pdid_fifo_lock; }; diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.c b/drivers/infiniband/hw/cxgb3/cxio_resource.c index bd233c087653..65072bdfc1bf 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_resource.c +++ b/drivers/infiniband/hw/cxgb3/cxio_resource.c @@ -39,12 +39,12 @@ #include "cxio_resource.h" #include "cxio_hal.h" -static struct kfifo *rhdl_fifo; +static struct kfifo rhdl_fifo; static spinlock_t rhdl_fifo_lock; #define RANDOM_SIZE 16 -static int __cxio_init_resource_fifo(struct kfifo **fifo, +static int __cxio_init_resource_fifo(struct kfifo *fifo, spinlock_t *fifo_lock, u32 nr, u32 skip_low, u32 skip_high, @@ -55,12 +55,11 @@ static int __cxio_init_resource_fifo(struct kfifo **fifo, u32 rarray[16]; spin_lock_init(fifo_lock); - *fifo = kfifo_alloc(nr * sizeof(u32), GFP_KERNEL, fifo_lock); - if (IS_ERR(*fifo)) + if (kfifo_alloc(fifo, nr * sizeof(u32), GFP_KERNEL, fifo_lock)) return -ENOMEM; for (i = 0; i < skip_low + skip_high; i++) - __kfifo_put(*fifo, (unsigned char *) &entry, sizeof(u32)); + __kfifo_put(fifo, (unsigned char *) &entry, sizeof(u32)); if (random) { j = 0; random_bytes = random32(); @@ -72,33 +71,33 @@ static int __cxio_init_resource_fifo(struct kfifo **fifo, random_bytes = random32(); } idx = (random_bytes >> (j * 2)) & 0xF; - __kfifo_put(*fifo, + __kfifo_put(fifo, (unsigned char *) &rarray[idx], sizeof(u32)); rarray[idx] = i; j++; } for (i = 0; i < RANDOM_SIZE; i++) - __kfifo_put(*fifo, + __kfifo_put(fifo, (unsigned char *) &rarray[i], sizeof(u32)); } else for (i = skip_low; i < nr - skip_high; i++) - __kfifo_put(*fifo, (unsigned char *) &i, sizeof(u32)); + __kfifo_put(fifo, (unsigned char *) &i, sizeof(u32)); for (i = 0; i < skip_low + skip_high; i++) - kfifo_get(*fifo, (unsigned char *) &entry, sizeof(u32)); + kfifo_get(fifo, (unsigned char *) &entry, sizeof(u32)); return 0; } -static int cxio_init_resource_fifo(struct kfifo **fifo, spinlock_t * fifo_lock, +static int cxio_init_resource_fifo(struct kfifo *fifo, spinlock_t * fifo_lock, u32 nr, u32 skip_low, u32 skip_high) { return (__cxio_init_resource_fifo(fifo, fifo_lock, nr, skip_low, skip_high, 0)); } -static int cxio_init_resource_fifo_random(struct kfifo **fifo, +static int cxio_init_resource_fifo_random(struct kfifo *fifo, spinlock_t * fifo_lock, u32 nr, u32 skip_low, u32 skip_high) { @@ -113,15 +112,14 @@ static int cxio_init_qpid_fifo(struct cxio_rdev *rdev_p) spin_lock_init(&rdev_p->rscp->qpid_fifo_lock); - rdev_p->rscp->qpid_fifo = kfifo_alloc(T3_MAX_NUM_QP * sizeof(u32), + if (kfifo_alloc(&rdev_p->rscp->qpid_fifo, T3_MAX_NUM_QP * sizeof(u32), GFP_KERNEL, - &rdev_p->rscp->qpid_fifo_lock); - if (IS_ERR(rdev_p->rscp->qpid_fifo)) + &rdev_p->rscp->qpid_fifo_lock)) return -ENOMEM; for (i = 16; i < T3_MAX_NUM_QP; i++) if (!(i & rdev_p->qpmask)) - __kfifo_put(rdev_p->rscp->qpid_fifo, + __kfifo_put(&rdev_p->rscp->qpid_fifo, (unsigned char *) &i, sizeof(u32)); return 0; } @@ -134,7 +132,7 @@ int cxio_hal_init_rhdl_resource(u32 nr_rhdl) void cxio_hal_destroy_rhdl_resource(void) { - kfifo_free(rhdl_fifo); + kfifo_free(&rhdl_fifo); } /* nr_* must be power of 2 */ @@ -167,11 +165,11 @@ int cxio_hal_init_resource(struct cxio_rdev *rdev_p, goto pdid_err; return 0; pdid_err: - kfifo_free(rscp->cqid_fifo); + kfifo_free(&rscp->cqid_fifo); cqid_err: - kfifo_free(rscp->qpid_fifo); + kfifo_free(&rscp->qpid_fifo); qpid_err: - kfifo_free(rscp->tpt_fifo); + kfifo_free(&rscp->tpt_fifo); tpt_err: return -ENOMEM; } @@ -195,17 +193,17 @@ static void cxio_hal_put_resource(struct kfifo *fifo, u32 entry) u32 cxio_hal_get_stag(struct cxio_hal_resource *rscp) { - return cxio_hal_get_resource(rscp->tpt_fifo); + return cxio_hal_get_resource(&rscp->tpt_fifo); } void cxio_hal_put_stag(struct cxio_hal_resource *rscp, u32 stag) { - cxio_hal_put_resource(rscp->tpt_fifo, stag); + cxio_hal_put_resource(&rscp->tpt_fifo, stag); } u32 cxio_hal_get_qpid(struct cxio_hal_resource *rscp) { - u32 qpid = cxio_hal_get_resource(rscp->qpid_fifo); + u32 qpid = cxio_hal_get_resource(&rscp->qpid_fifo); PDBG("%s qpid 0x%x\n", __func__, qpid); return qpid; } @@ -213,35 +211,35 @@ u32 cxio_hal_get_qpid(struct cxio_hal_resource *rscp) void cxio_hal_put_qpid(struct cxio_hal_resource *rscp, u32 qpid) { PDBG("%s qpid 0x%x\n", __func__, qpid); - cxio_hal_put_resource(rscp->qpid_fifo, qpid); + cxio_hal_put_resource(&rscp->qpid_fifo, qpid); } u32 cxio_hal_get_cqid(struct cxio_hal_resource *rscp) { - return cxio_hal_get_resource(rscp->cqid_fifo); + return cxio_hal_get_resource(&rscp->cqid_fifo); } void cxio_hal_put_cqid(struct cxio_hal_resource *rscp, u32 cqid) { - cxio_hal_put_resource(rscp->cqid_fifo, cqid); + cxio_hal_put_resource(&rscp->cqid_fifo, cqid); } u32 cxio_hal_get_pdid(struct cxio_hal_resource *rscp) { - return cxio_hal_get_resource(rscp->pdid_fifo); + return cxio_hal_get_resource(&rscp->pdid_fifo); } void cxio_hal_put_pdid(struct cxio_hal_resource *rscp, u32 pdid) { - cxio_hal_put_resource(rscp->pdid_fifo, pdid); + cxio_hal_put_resource(&rscp->pdid_fifo, pdid); } void cxio_hal_destroy_resource(struct cxio_hal_resource *rscp) { - kfifo_free(rscp->tpt_fifo); - kfifo_free(rscp->cqid_fifo); - kfifo_free(rscp->qpid_fifo); - kfifo_free(rscp->pdid_fifo); + kfifo_free(&rscp->tpt_fifo); + kfifo_free(&rscp->cqid_fifo); + kfifo_free(&rscp->qpid_fifo); + kfifo_free(&rscp->pdid_fifo); kfree(rscp); } diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index 6ffa64cd1c6d..dacbbb839b9e 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -800,7 +800,7 @@ static irqreturn_t meye_irq(int irq, void *dev_id) return IRQ_HANDLED; if (meye.mchip_mode == MCHIP_HIC_MODE_CONT_OUT) { - if (kfifo_get(meye.grabq, (unsigned char *)&reqnr, + if (kfifo_get(&meye.grabq, (unsigned char *)&reqnr, sizeof(int)) != sizeof(int)) { mchip_free_frame(); return IRQ_HANDLED; @@ -811,7 +811,7 @@ static irqreturn_t meye_irq(int irq, void *dev_id) meye.grab_buffer[reqnr].state = MEYE_BUF_DONE; do_gettimeofday(&meye.grab_buffer[reqnr].timestamp); meye.grab_buffer[reqnr].sequence = sequence++; - kfifo_put(meye.doneq, (unsigned char *)&reqnr, sizeof(int)); + kfifo_put(&meye.doneq, (unsigned char *)&reqnr, sizeof(int)); wake_up_interruptible(&meye.proc_list); } else { int size; @@ -820,7 +820,7 @@ static irqreturn_t meye_irq(int irq, void *dev_id) mchip_free_frame(); goto again; } - if (kfifo_get(meye.grabq, (unsigned char *)&reqnr, + if (kfifo_get(&meye.grabq, (unsigned char *)&reqnr, sizeof(int)) != sizeof(int)) { mchip_free_frame(); goto again; @@ -831,7 +831,7 @@ static irqreturn_t meye_irq(int irq, void *dev_id) meye.grab_buffer[reqnr].state = MEYE_BUF_DONE; do_gettimeofday(&meye.grab_buffer[reqnr].timestamp); meye.grab_buffer[reqnr].sequence = sequence++; - kfifo_put(meye.doneq, (unsigned char *)&reqnr, sizeof(int)); + kfifo_put(&meye.doneq, (unsigned char *)&reqnr, sizeof(int)); wake_up_interruptible(&meye.proc_list); } mchip_free_frame(); @@ -859,8 +859,8 @@ static int meye_open(struct file *file) for (i = 0; i < MEYE_MAX_BUFNBRS; i++) meye.grab_buffer[i].state = MEYE_BUF_UNUSED; - kfifo_reset(meye.grabq); - kfifo_reset(meye.doneq); + kfifo_reset(&meye.grabq); + kfifo_reset(&meye.doneq); return 0; } @@ -933,7 +933,7 @@ static int meyeioc_qbuf_capt(int *nb) mchip_cont_compression_start(); meye.grab_buffer[*nb].state = MEYE_BUF_USING; - kfifo_put(meye.grabq, (unsigned char *)nb, sizeof(int)); + kfifo_put(&meye.grabq, (unsigned char *)nb, sizeof(int)); mutex_unlock(&meye.lock); return 0; @@ -965,7 +965,7 @@ static int meyeioc_sync(struct file *file, void *fh, int *i) /* fall through */ case MEYE_BUF_DONE: meye.grab_buffer[*i].state = MEYE_BUF_UNUSED; - kfifo_get(meye.doneq, (unsigned char *)&unused, sizeof(int)); + kfifo_get(&meye.doneq, (unsigned char *)&unused, sizeof(int)); } *i = meye.grab_buffer[*i].size; mutex_unlock(&meye.lock); @@ -1452,7 +1452,7 @@ static int vidioc_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) buf->flags |= V4L2_BUF_FLAG_QUEUED; buf->flags &= ~V4L2_BUF_FLAG_DONE; meye.grab_buffer[buf->index].state = MEYE_BUF_USING; - kfifo_put(meye.grabq, (unsigned char *)&buf->index, sizeof(int)); + kfifo_put(&meye.grabq, (unsigned char *)&buf->index, sizeof(int)); mutex_unlock(&meye.lock); return 0; @@ -1467,18 +1467,18 @@ static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) mutex_lock(&meye.lock); - if (kfifo_len(meye.doneq) == 0 && file->f_flags & O_NONBLOCK) { + if (kfifo_len(&meye.doneq) == 0 && file->f_flags & O_NONBLOCK) { mutex_unlock(&meye.lock); return -EAGAIN; } if (wait_event_interruptible(meye.proc_list, - kfifo_len(meye.doneq) != 0) < 0) { + kfifo_len(&meye.doneq) != 0) < 0) { mutex_unlock(&meye.lock); return -EINTR; } - if (!kfifo_get(meye.doneq, (unsigned char *)&reqnr, + if (!kfifo_get(&meye.doneq, (unsigned char *)&reqnr, sizeof(int))) { mutex_unlock(&meye.lock); return -EBUSY; @@ -1529,8 +1529,8 @@ static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) { mutex_lock(&meye.lock); mchip_hic_stop(); - kfifo_reset(meye.grabq); - kfifo_reset(meye.doneq); + kfifo_reset(&meye.grabq); + kfifo_reset(&meye.doneq); for (i = 0; i < MEYE_MAX_BUFNBRS; i++) meye.grab_buffer[i].state = MEYE_BUF_UNUSED; @@ -1572,7 +1572,7 @@ static unsigned int meye_poll(struct file *file, poll_table *wait) mutex_lock(&meye.lock); poll_wait(file, &meye.proc_list, wait); - if (kfifo_len(meye.doneq)) + if (kfifo_len(&meye.doneq)) res = POLLIN | POLLRDNORM; mutex_unlock(&meye.lock); return res; @@ -1745,16 +1745,14 @@ static int __devinit meye_probe(struct pci_dev *pcidev, } spin_lock_init(&meye.grabq_lock); - meye.grabq = kfifo_alloc(sizeof(int) * MEYE_MAX_BUFNBRS, GFP_KERNEL, - &meye.grabq_lock); - if (IS_ERR(meye.grabq)) { + if (kfifo_alloc(&meye.grabq, sizeof(int) * MEYE_MAX_BUFNBRS, GFP_KERNEL, + &meye.grabq_lock)) { printk(KERN_ERR "meye: fifo allocation failed\n"); goto outkfifoalloc1; } spin_lock_init(&meye.doneq_lock); - meye.doneq = kfifo_alloc(sizeof(int) * MEYE_MAX_BUFNBRS, GFP_KERNEL, - &meye.doneq_lock); - if (IS_ERR(meye.doneq)) { + if (kfifo_alloc(&meye.doneq, sizeof(int) * MEYE_MAX_BUFNBRS, GFP_KERNEL, + &meye.doneq_lock)) { printk(KERN_ERR "meye: fifo allocation failed\n"); goto outkfifoalloc2; } @@ -1868,9 +1866,9 @@ static int __devinit meye_probe(struct pci_dev *pcidev, outenabledev: sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 0); outsonypienable: - kfifo_free(meye.doneq); + kfifo_free(&meye.doneq); outkfifoalloc2: - kfifo_free(meye.grabq); + kfifo_free(&meye.grabq); outkfifoalloc1: vfree(meye.grab_temp); outvmalloc: @@ -1901,8 +1899,8 @@ static void __devexit meye_remove(struct pci_dev *pcidev) sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 0); - kfifo_free(meye.doneq); - kfifo_free(meye.grabq); + kfifo_free(&meye.doneq); + kfifo_free(&meye.grabq); vfree(meye.grab_temp); diff --git a/drivers/media/video/meye.h b/drivers/media/video/meye.h index 5f70a106ba2b..1321ad5d6597 100644 --- a/drivers/media/video/meye.h +++ b/drivers/media/video/meye.h @@ -303,9 +303,9 @@ struct meye { struct meye_grab_buffer grab_buffer[MEYE_MAX_BUFNBRS]; int vma_use_count[MEYE_MAX_BUFNBRS]; /* mmap count */ struct mutex lock; /* mutex for open/mmap... */ - struct kfifo *grabq; /* queue for buffers to be grabbed */ + struct kfifo grabq; /* queue for buffers to be grabbed */ spinlock_t grabq_lock; /* lock protecting the queue */ - struct kfifo *doneq; /* queue for grabbed buffers */ + struct kfifo doneq; /* queue for grabbed buffers */ spinlock_t doneq_lock; /* lock protecting the queue */ wait_queue_head_t proc_list; /* wait queue */ struct video_device *video_dev; /* video device parameters */ diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index b9b371bfa30f..ffed17f4f506 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1365,7 +1365,7 @@ static void lbs_send_confirmsleep(struct lbs_private *priv) priv->dnld_sent = DNLD_RES_RECEIVED; /* If nothing to do, go back to sleep (?) */ - if (!__kfifo_len(priv->event_fifo) && !priv->resp_len[priv->resp_idx]) + if (!__kfifo_len(&priv->event_fifo) && !priv->resp_len[priv->resp_idx]) priv->psstate = PS_STATE_SLEEP; spin_unlock_irqrestore(&priv->driver_lock, flags); @@ -1439,7 +1439,7 @@ void lbs_ps_confirm_sleep(struct lbs_private *priv) } /* Pending events or command responses? */ - if (__kfifo_len(priv->event_fifo) || priv->resp_len[priv->resp_idx]) { + if (__kfifo_len(&priv->event_fifo) || priv->resp_len[priv->resp_idx]) { allowed = 0; lbs_deb_host("pending events or command responses\n"); } diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index 6a8d2b291d8c..05bb298dfae9 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -10,7 +10,7 @@ #include "scan.h" #include "assoc.h" - +#include /** sleep_params */ struct sleep_params { @@ -120,7 +120,7 @@ struct lbs_private { u32 resp_len[2]; /* Events sent from hardware to driver */ - struct kfifo *event_fifo; + struct kfifo event_fifo; /** thread to service interrupts */ struct task_struct *main_thread; diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index db38a5a719fa..403909287414 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -459,7 +459,7 @@ static int lbs_thread(void *data) else if (!list_empty(&priv->cmdpendingq) && !(priv->wakeup_dev_required)) shouldsleep = 0; /* We have a command to send */ - else if (__kfifo_len(priv->event_fifo)) + else if (__kfifo_len(&priv->event_fifo)) shouldsleep = 0; /* We have an event to process */ else shouldsleep = 1; /* No command */ @@ -511,9 +511,9 @@ static int lbs_thread(void *data) /* Process hardware events, e.g. card removed, link lost */ spin_lock_irq(&priv->driver_lock); - while (__kfifo_len(priv->event_fifo)) { + while (__kfifo_len(&priv->event_fifo)) { u32 event; - __kfifo_get(priv->event_fifo, (unsigned char *) &event, + __kfifo_get(&priv->event_fifo, (unsigned char *) &event, sizeof(event)); spin_unlock_irq(&priv->driver_lock); lbs_process_event(priv, event); @@ -883,10 +883,9 @@ static int lbs_init_adapter(struct lbs_private *priv) priv->resp_len[0] = priv->resp_len[1] = 0; /* Create the event FIFO */ - priv->event_fifo = kfifo_alloc(sizeof(u32) * 16, GFP_KERNEL, NULL); - if (IS_ERR(priv->event_fifo)) { + ret = kfifo_alloc(&priv->event_fifo, sizeof(u32) * 16, GFP_KERNEL, NULL); + if (ret) { lbs_pr_err("Out of memory allocating event FIFO buffer\n"); - ret = -ENOMEM; goto out; } @@ -901,8 +900,7 @@ static void lbs_free_adapter(struct lbs_private *priv) lbs_deb_enter(LBS_DEB_MAIN); lbs_free_cmd_buffer(priv); - if (priv->event_fifo) - kfifo_free(priv->event_fifo); + kfifo_free(&priv->event_fifo); del_timer(&priv->command_timer); del_timer(&priv->auto_deepsleep_timer); kfree(priv->networks); @@ -1177,7 +1175,7 @@ void lbs_queue_event(struct lbs_private *priv, u32 event) if (priv->psstate == PS_STATE_SLEEP) priv->psstate = PS_STATE_AWAKE; - __kfifo_put(priv->event_fifo, (unsigned char *) &event, sizeof(u32)); + __kfifo_put(&priv->event_fifo, (unsigned char *) &event, sizeof(u32)); wake_up_interruptible(&priv->waitq); diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index bcd4ba8be7db..f999fba0e25e 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -164,7 +164,7 @@ struct fujitsu_hotkey_t { struct input_dev *input; char phys[32]; struct platform_device *pf_device; - struct kfifo *fifo; + struct kfifo fifo; spinlock_t fifo_lock; int rfkill_supported; int rfkill_state; @@ -824,12 +824,10 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) /* kfifo */ spin_lock_init(&fujitsu_hotkey->fifo_lock); - fujitsu_hotkey->fifo = - kfifo_alloc(RINGBUFFERSIZE * sizeof(int), GFP_KERNEL, - &fujitsu_hotkey->fifo_lock); - if (IS_ERR(fujitsu_hotkey->fifo)) { + error = kfifo_alloc(&fujitsu_hotkey->fifo, RINGBUFFERSIZE * sizeof(int), + GFP_KERNEL, &fujitsu_hotkey->fifo_lock); + if (error) { printk(KERN_ERR "kfifo_alloc failed\n"); - error = PTR_ERR(fujitsu_hotkey->fifo); goto err_stop; } @@ -934,7 +932,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) err_free_input_dev: input_free_device(input); err_free_fifo: - kfifo_free(fujitsu_hotkey->fifo); + kfifo_free(&fujitsu_hotkey->fifo); err_stop: return result; } @@ -956,7 +954,7 @@ static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type) input_free_device(input); - kfifo_free(fujitsu_hotkey->fifo); + kfifo_free(&fujitsu_hotkey->fifo); fujitsu_hotkey->acpi_handle = NULL; @@ -1008,7 +1006,7 @@ static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event) vdbg_printk(FUJLAPTOP_DBG_TRACE, "Push keycode into ringbuffer [%d]\n", keycode); - status = kfifo_put(fujitsu_hotkey->fifo, + status = kfifo_put(&fujitsu_hotkey->fifo, (unsigned char *)&keycode, sizeof(keycode)); if (status != sizeof(keycode)) { @@ -1022,7 +1020,7 @@ static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event) } else if (keycode == 0) { while ((status = kfifo_get - (fujitsu_hotkey->fifo, (unsigned char *) + (&fujitsu_hotkey->fifo, (unsigned char *) &keycode_r, sizeof (keycode_r))) == sizeof(keycode_r)) { diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 7a2cc8a5c975..04625a048e74 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -142,7 +142,7 @@ struct sony_laptop_input_s { atomic_t users; struct input_dev *jog_dev; struct input_dev *key_dev; - struct kfifo *fifo; + struct kfifo fifo; spinlock_t fifo_lock; struct workqueue_struct *wq; }; @@ -300,7 +300,7 @@ static void do_sony_laptop_release_key(struct work_struct *work) { struct sony_laptop_keypress kp; - while (kfifo_get(sony_laptop_input.fifo, (unsigned char *)&kp, + while (kfifo_get(&sony_laptop_input.fifo, (unsigned char *)&kp, sizeof(kp)) == sizeof(kp)) { msleep(10); input_report_key(kp.dev, kp.key, 0); @@ -362,7 +362,7 @@ static void sony_laptop_report_input_event(u8 event) /* we emit the scancode so we can always remap the key */ input_event(kp.dev, EV_MSC, MSC_SCAN, event); input_sync(kp.dev); - kfifo_put(sony_laptop_input.fifo, + kfifo_put(&sony_laptop_input.fifo, (unsigned char *)&kp, sizeof(kp)); if (!work_pending(&sony_laptop_release_key_work)) @@ -385,12 +385,11 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device) /* kfifo */ spin_lock_init(&sony_laptop_input.fifo_lock); - sony_laptop_input.fifo = - kfifo_alloc(SONY_LAPTOP_BUF_SIZE, GFP_KERNEL, + error = + kfifo_alloc(&sony_laptop_input.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL, &sony_laptop_input.fifo_lock); - if (IS_ERR(sony_laptop_input.fifo)) { + if (error) { printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n"); - error = PTR_ERR(sony_laptop_input.fifo); goto err_dec_users; } @@ -474,7 +473,7 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device) destroy_workqueue(sony_laptop_input.wq); err_free_kfifo: - kfifo_free(sony_laptop_input.fifo); + kfifo_free(&sony_laptop_input.fifo); err_dec_users: atomic_dec(&sony_laptop_input.users); @@ -500,7 +499,7 @@ static void sony_laptop_remove_input(void) } destroy_workqueue(sony_laptop_input.wq); - kfifo_free(sony_laptop_input.fifo); + kfifo_free(&sony_laptop_input.fifo); } /*********** Platform Device ***********/ @@ -2079,7 +2078,7 @@ static struct attribute_group spic_attribute_group = { struct sonypi_compat_s { struct fasync_struct *fifo_async; - struct kfifo *fifo; + struct kfifo fifo; spinlock_t fifo_lock; wait_queue_head_t fifo_proc_list; atomic_t open_count; @@ -2104,12 +2103,12 @@ static int sonypi_misc_open(struct inode *inode, struct file *file) /* Flush input queue on first open */ unsigned long flags; - spin_lock_irqsave(sonypi_compat.fifo->lock, flags); + spin_lock_irqsave(&sonypi_compat.fifo_lock, flags); if (atomic_inc_return(&sonypi_compat.open_count) == 1) - __kfifo_reset(sonypi_compat.fifo); + __kfifo_reset(&sonypi_compat.fifo); - spin_unlock_irqrestore(sonypi_compat.fifo->lock, flags); + spin_unlock_irqrestore(&sonypi_compat.fifo_lock, flags); return 0; } @@ -2120,17 +2119,17 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, ssize_t ret; unsigned char c; - if ((kfifo_len(sonypi_compat.fifo) == 0) && + if ((kfifo_len(&sonypi_compat.fifo) == 0) && (file->f_flags & O_NONBLOCK)) return -EAGAIN; ret = wait_event_interruptible(sonypi_compat.fifo_proc_list, - kfifo_len(sonypi_compat.fifo) != 0); + kfifo_len(&sonypi_compat.fifo) != 0); if (ret) return ret; while (ret < count && - (kfifo_get(sonypi_compat.fifo, &c, sizeof(c)) == sizeof(c))) { + (kfifo_get(&sonypi_compat.fifo, &c, sizeof(c)) == sizeof(c))) { if (put_user(c, buf++)) return -EFAULT; ret++; @@ -2147,7 +2146,7 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, static unsigned int sonypi_misc_poll(struct file *file, poll_table *wait) { poll_wait(file, &sonypi_compat.fifo_proc_list, wait); - if (kfifo_len(sonypi_compat.fifo)) + if (kfifo_len(&sonypi_compat.fifo)) return POLLIN | POLLRDNORM; return 0; } @@ -2309,7 +2308,7 @@ static struct miscdevice sonypi_misc_device = { static void sonypi_compat_report_event(u8 event) { - kfifo_put(sonypi_compat.fifo, (unsigned char *)&event, sizeof(event)); + kfifo_put(&sonypi_compat.fifo, (unsigned char *)&event, sizeof(event)); kill_fasync(&sonypi_compat.fifo_async, SIGIO, POLL_IN); wake_up_interruptible(&sonypi_compat.fifo_proc_list); } @@ -2319,11 +2318,12 @@ static int sonypi_compat_init(void) int error; spin_lock_init(&sonypi_compat.fifo_lock); - sonypi_compat.fifo = kfifo_alloc(SONY_LAPTOP_BUF_SIZE, GFP_KERNEL, + error = + kfifo_alloc(&sonypi_compat.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL, &sonypi_compat.fifo_lock); - if (IS_ERR(sonypi_compat.fifo)) { + if (error) { printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n"); - return PTR_ERR(sonypi_compat.fifo); + return error; } init_waitqueue_head(&sonypi_compat.fifo_proc_list); @@ -2342,14 +2342,14 @@ static int sonypi_compat_init(void) return 0; err_free_kfifo: - kfifo_free(sonypi_compat.fifo); + kfifo_free(&sonypi_compat.fifo); return error; } static void sonypi_compat_exit(void) { misc_deregister(&sonypi_misc_device); - kfifo_free(sonypi_compat.fifo); + kfifo_free(&sonypi_compat.fifo); } #else static int sonypi_compat_init(void) { return 0; } diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index b7689f3d05f5..cf0aa7e90be9 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -517,7 +517,7 @@ static void iscsi_free_task(struct iscsi_task *task) if (conn->login_task == task) return; - __kfifo_put(session->cmdpool.queue, (void*)&task, sizeof(void*)); + __kfifo_put(&session->cmdpool.queue, (void*)&task, sizeof(void*)); if (sc) { task->sc = NULL; @@ -737,7 +737,7 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE); BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED); - if (!__kfifo_get(session->cmdpool.queue, + if (!__kfifo_get(&session->cmdpool.queue, (void*)&task, sizeof(void*))) return NULL; } @@ -1567,7 +1567,7 @@ static inline struct iscsi_task *iscsi_alloc_task(struct iscsi_conn *conn, { struct iscsi_task *task; - if (!__kfifo_get(conn->session->cmdpool.queue, + if (!__kfifo_get(&conn->session->cmdpool.queue, (void *) &task, sizeof(void *))) return NULL; @@ -2461,12 +2461,7 @@ iscsi_pool_init(struct iscsi_pool *q, int max, void ***items, int item_size) if (q->pool == NULL) return -ENOMEM; - q->queue = kfifo_init((void*)q->pool, max * sizeof(void*), - GFP_KERNEL, NULL); - if (IS_ERR(q->queue)) { - q->queue = NULL; - goto enomem; - } + kfifo_init(&q->queue, (void*)q->pool, max * sizeof(void*), NULL); for (i = 0; i < max; i++) { q->pool[i] = kzalloc(item_size, GFP_KERNEL); @@ -2474,7 +2469,7 @@ iscsi_pool_init(struct iscsi_pool *q, int max, void ***items, int item_size) q->max = i; goto enomem; } - __kfifo_put(q->queue, (void*)&q->pool[i], sizeof(void*)); + __kfifo_put(&q->queue, (void*)&q->pool[i], sizeof(void*)); } if (items) { @@ -2497,7 +2492,6 @@ void iscsi_pool_free(struct iscsi_pool *q) for (i = 0; i < q->max; i++) kfree(q->pool[i]); kfree(q->pool); - kfree(q->queue); } EXPORT_SYMBOL_GPL(iscsi_pool_free); @@ -2825,7 +2819,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, int dd_size, /* allocate login_task used for the login/text sequences */ spin_lock_bh(&session->lock); - if (!__kfifo_get(session->cmdpool.queue, + if (!__kfifo_get(&session->cmdpool.queue, (void*)&conn->login_task, sizeof(void*))) { spin_unlock_bh(&session->lock); @@ -2845,7 +2839,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, int dd_size, return cls_conn; login_task_data_alloc_fail: - __kfifo_put(session->cmdpool.queue, (void*)&conn->login_task, + __kfifo_put(&session->cmdpool.queue, (void*)&conn->login_task, sizeof(void*)); login_task_alloc_fail: iscsi_destroy_conn(cls_conn); @@ -2908,7 +2902,7 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) free_pages((unsigned long) conn->data, get_order(ISCSI_DEF_MAX_RECV_SEG_LEN)); kfree(conn->persistent_address); - __kfifo_put(session->cmdpool.queue, (void*)&conn->login_task, + __kfifo_put(&session->cmdpool.queue, (void*)&conn->login_task, sizeof(void*)); if (session->leadconn == conn) session->leadconn = NULL; diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index ca25ee5190b0..a83ee56a185e 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -445,15 +445,15 @@ void iscsi_tcp_cleanup_task(struct iscsi_task *task) return; /* flush task's r2t queues */ - while (__kfifo_get(tcp_task->r2tqueue, (void*)&r2t, sizeof(void*))) { - __kfifo_put(tcp_task->r2tpool.queue, (void*)&r2t, + while (__kfifo_get(&tcp_task->r2tqueue, (void*)&r2t, sizeof(void*))) { + __kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); ISCSI_DBG_TCP(task->conn, "pending r2t dropped\n"); } r2t = tcp_task->r2t; if (r2t != NULL) { - __kfifo_put(tcp_task->r2tpool.queue, (void*)&r2t, + __kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); tcp_task->r2t = NULL; } @@ -541,7 +541,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) return 0; } - rc = __kfifo_get(tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); + rc = __kfifo_get(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); if (!rc) { iscsi_conn_printk(KERN_ERR, conn, "Could not allocate R2T. " "Target has sent more R2Ts than it " @@ -554,7 +554,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) if (r2t->data_length == 0) { iscsi_conn_printk(KERN_ERR, conn, "invalid R2T with zero data len\n"); - __kfifo_put(tcp_task->r2tpool.queue, (void*)&r2t, + __kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); return ISCSI_ERR_DATALEN; } @@ -570,7 +570,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) "invalid R2T with data len %u at offset %u " "and total length %d\n", r2t->data_length, r2t->data_offset, scsi_out(task->sc)->length); - __kfifo_put(tcp_task->r2tpool.queue, (void*)&r2t, + __kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); return ISCSI_ERR_DATALEN; } @@ -580,7 +580,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) r2t->sent = 0; tcp_task->exp_datasn = r2tsn + 1; - __kfifo_put(tcp_task->r2tqueue, (void*)&r2t, sizeof(void*)); + __kfifo_put(&tcp_task->r2tqueue, (void*)&r2t, sizeof(void*)); conn->r2t_pdus_cnt++; iscsi_requeue_task(task); @@ -951,7 +951,7 @@ int iscsi_tcp_task_init(struct iscsi_task *task) return conn->session->tt->init_pdu(task, 0, task->data_count); } - BUG_ON(__kfifo_len(tcp_task->r2tqueue)); + BUG_ON(__kfifo_len(&tcp_task->r2tqueue)); tcp_task->exp_datasn = 0; /* Prepare PDU, optionally w/ immediate data */ @@ -982,7 +982,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) if (r2t->data_length <= r2t->sent) { ISCSI_DBG_TCP(task->conn, " done with r2t %p\n", r2t); - __kfifo_put(tcp_task->r2tpool.queue, + __kfifo_put(&tcp_task->r2tpool.queue, (void *)&tcp_task->r2t, sizeof(void *)); tcp_task->r2t = r2t = NULL; @@ -990,7 +990,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) } if (r2t == NULL) { - __kfifo_get(tcp_task->r2tqueue, + __kfifo_get(&tcp_task->r2tqueue, (void *)&tcp_task->r2t, sizeof(void *)); r2t = tcp_task->r2t; } @@ -1127,9 +1127,8 @@ int iscsi_tcp_r2tpool_alloc(struct iscsi_session *session) } /* R2T xmit queue */ - tcp_task->r2tqueue = kfifo_alloc( - session->max_r2t * 4 * sizeof(void*), GFP_KERNEL, NULL); - if (tcp_task->r2tqueue == ERR_PTR(-ENOMEM)) { + if (kfifo_alloc(&tcp_task->r2tqueue, + session->max_r2t * 4 * sizeof(void*), GFP_KERNEL, NULL)) { iscsi_pool_free(&tcp_task->r2tpool); goto r2t_alloc_fail; } @@ -1142,7 +1141,7 @@ int iscsi_tcp_r2tpool_alloc(struct iscsi_session *session) struct iscsi_task *task = session->cmds[i]; struct iscsi_tcp_task *tcp_task = task->dd_data; - kfifo_free(tcp_task->r2tqueue); + kfifo_free(&tcp_task->r2tqueue); iscsi_pool_free(&tcp_task->r2tpool); } return -ENOMEM; @@ -1157,7 +1156,7 @@ void iscsi_tcp_r2tpool_free(struct iscsi_session *session) struct iscsi_task *task = session->cmds[i]; struct iscsi_tcp_task *tcp_task = task->dd_data; - kfifo_free(tcp_task->r2tqueue); + kfifo_free(&tcp_task->r2tqueue); iscsi_pool_free(&tcp_task->r2tpool); } } diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c index 9ad38e81e343..b1b5e51ca8e3 100644 --- a/drivers/scsi/libsrp.c +++ b/drivers/scsi/libsrp.c @@ -58,19 +58,16 @@ static int srp_iu_pool_alloc(struct srp_queue *q, size_t max, goto free_pool; spin_lock_init(&q->lock); - q->queue = kfifo_init((void *) q->pool, max * sizeof(void *), - GFP_KERNEL, &q->lock); - if (IS_ERR(q->queue)) - goto free_item; + kfifo_init(&q->queue, (void *) q->pool, max * sizeof(void *), + &q->lock); for (i = 0, iue = q->items; i < max; i++) { - __kfifo_put(q->queue, (void *) &iue, sizeof(void *)); + __kfifo_put(&q->queue, (void *) &iue, sizeof(void *)); iue->sbuf = ring[i]; iue++; } return 0; -free_item: kfree(q->items); free_pool: kfree(q->pool); @@ -167,7 +164,7 @@ struct iu_entry *srp_iu_get(struct srp_target *target) { struct iu_entry *iue = NULL; - kfifo_get(target->iu_queue.queue, (void *) &iue, sizeof(void *)); + kfifo_get(&target->iu_queue.queue, (void *) &iue, sizeof(void *)); if (!iue) return iue; iue->target = target; @@ -179,7 +176,7 @@ EXPORT_SYMBOL_GPL(srp_iu_get); void srp_iu_put(struct iu_entry *iue) { - kfifo_put(iue->target->iu_queue.queue, (void *) &iue, sizeof(void *)); + kfifo_put(&iue->target->iu_queue.queue, (void *) &iue, sizeof(void *)); } EXPORT_SYMBOL_GPL(srp_iu_put); diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index 00a29855d0c4..ff43747a614f 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -37,7 +37,7 @@ static void recycle_frame(struct fhci_usb *usb, struct packet *pkt) pkt->info = 0; pkt->priv_data = NULL; - cq_put(usb->ep0->empty_frame_Q, pkt); + cq_put(&usb->ep0->empty_frame_Q, pkt); } /* confirm submitted packet */ @@ -57,7 +57,7 @@ void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt) if ((td->data + td->actual_len) && trans_len) memcpy(td->data + td->actual_len, pkt->data, trans_len); - cq_put(usb->ep0->dummy_packets_Q, pkt->data); + cq_put(&usb->ep0->dummy_packets_Q, pkt->data); } recycle_frame(usb, pkt); @@ -213,7 +213,7 @@ static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td) } /* update frame object fields before transmitting */ - pkt = cq_get(usb->ep0->empty_frame_Q); + pkt = cq_get(&usb->ep0->empty_frame_Q); if (!pkt) { fhci_dbg(usb->fhci, "there is no empty frame\n"); return -1; @@ -222,7 +222,7 @@ static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td) pkt->info = 0; if (data == NULL) { - data = cq_get(usb->ep0->dummy_packets_Q); + data = cq_get(&usb->ep0->dummy_packets_Q); BUG_ON(!data); pkt->info = PKT_DUMMY_PACKET; } @@ -246,7 +246,7 @@ static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td) list_del_init(&td->frame_lh); td->status = USB_TD_OK; if (pkt->info & PKT_DUMMY_PACKET) - cq_put(usb->ep0->dummy_packets_Q, pkt->data); + cq_put(&usb->ep0->dummy_packets_Q, pkt->data); recycle_frame(usb, pkt); usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD); fhci_err(usb->fhci, "host transaction failed\n"); diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c index b40332290319..d224ab467a40 100644 --- a/drivers/usb/host/fhci-tds.c +++ b/drivers/usb/host/fhci-tds.c @@ -106,33 +106,33 @@ void fhci_ep0_free(struct fhci_usb *usb) cpm_muram_free(cpm_muram_offset(ep->td_base)); if (ep->conf_frame_Q) { - size = cq_howmany(ep->conf_frame_Q); + size = cq_howmany(&ep->conf_frame_Q); for (; size; size--) { - struct packet *pkt = cq_get(ep->conf_frame_Q); + struct packet *pkt = cq_get(&ep->conf_frame_Q); kfree(pkt); } - cq_delete(ep->conf_frame_Q); + cq_delete(&ep->conf_frame_Q); } if (ep->empty_frame_Q) { - size = cq_howmany(ep->empty_frame_Q); + size = cq_howmany(&ep->empty_frame_Q); for (; size; size--) { - struct packet *pkt = cq_get(ep->empty_frame_Q); + struct packet *pkt = cq_get(&ep->empty_frame_Q); kfree(pkt); } - cq_delete(ep->empty_frame_Q); + cq_delete(&ep->empty_frame_Q); } if (ep->dummy_packets_Q) { - size = cq_howmany(ep->dummy_packets_Q); + size = cq_howmany(&ep->dummy_packets_Q); for (; size; size--) { - u8 *buff = cq_get(ep->dummy_packets_Q); + u8 *buff = cq_get(&ep->dummy_packets_Q); kfree(buff); } - cq_delete(ep->dummy_packets_Q); + cq_delete(&ep->dummy_packets_Q); } kfree(ep); @@ -175,10 +175,9 @@ u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, ep->td_base = cpm_muram_addr(ep_offset); /* zero all queue pointers */ - ep->conf_frame_Q = cq_new(ring_len + 2); - ep->empty_frame_Q = cq_new(ring_len + 2); - ep->dummy_packets_Q = cq_new(ring_len + 2); - if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) { + if (cq_new(&ep->conf_frame_Q, ring_len + 2) || + cq_new(&ep->empty_frame_Q, ring_len + 2) || + cq_new(&ep->dummy_packets_Q, ring_len + 2)) { err_for = "frame_queues"; goto err; } @@ -199,8 +198,8 @@ u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, err_for = "buffer"; goto err; } - cq_put(ep->empty_frame_Q, pkt); - cq_put(ep->dummy_packets_Q, buff); + cq_put(&ep->empty_frame_Q, pkt); + cq_put(&ep->dummy_packets_Q, buff); } /* we put the endpoint parameter RAM right behind the TD ring */ @@ -319,7 +318,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb) if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W)) continue; - pkt = cq_get(ep->conf_frame_Q); + pkt = cq_get(&ep->conf_frame_Q); if (!pkt) fhci_err(usb->fhci, "no frame to confirm\n"); @@ -460,9 +459,9 @@ u32 fhci_host_transaction(struct fhci_usb *usb, out_be16(&td->length, pkt->len); /* put the frame to the confirmation queue */ - cq_put(ep->conf_frame_Q, pkt); + cq_put(&ep->conf_frame_Q, pkt); - if (cq_howmany(ep->conf_frame_Q) == 1) + if (cq_howmany(&ep->conf_frame_Q) == 1) out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); return 0; diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h index 7116284ed21a..2277428ef5d3 100644 --- a/drivers/usb/host/fhci.h +++ b/drivers/usb/host/fhci.h @@ -423,9 +423,9 @@ struct endpoint { struct usb_td __iomem *td_base; /* first TD in the ring */ struct usb_td __iomem *conf_td; /* next TD for confirm after transac */ struct usb_td __iomem *empty_td;/* next TD for new transaction req. */ - struct kfifo *empty_frame_Q; /* Empty frames list to use */ - struct kfifo *conf_frame_Q; /* frames passed to TDs,waiting for tx */ - struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */ + struct kfifo empty_frame_Q; /* Empty frames list to use */ + struct kfifo conf_frame_Q; /* frames passed to TDs,waiting for tx */ + struct kfifo dummy_packets_Q;/* dummy packets for the CRC overun */ bool already_pushed_dummy_bd; }; @@ -493,9 +493,9 @@ static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci) } /* fifo of pointers */ -static inline struct kfifo *cq_new(int size) +static inline int cq_new(struct kfifo *fifo, int size) { - return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL); + return kfifo_alloc(fifo, size * sizeof(void *), GFP_KERNEL, NULL); } static inline void cq_delete(struct kfifo *kfifo) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4543f359be75..44b72d47fac2 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -939,9 +939,8 @@ int usb_serial_probe(struct usb_interface *interface, dev_err(&interface->dev, "No free urbs available\n"); goto probe_error; } - port->write_fifo = kfifo_alloc(PAGE_SIZE, GFP_KERNEL, - &port->lock); - if (IS_ERR(port->write_fifo)) + if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL, + &port->lock)) goto probe_error; buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); port->bulk_out_size = buffer_size; diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index ad6bdf5a5970..c3f8d82efd34 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -1,6 +1,7 @@ /* - * A simple kernel FIFO implementation. + * A generic kernel FIFO implementation. * + * Copyright (C) 2009 Stefani Seibold * Copyright (C) 2004 Stelian Pop * * This program is free software; you can redistribute it and/or modify @@ -32,10 +33,10 @@ struct kfifo { spinlock_t *lock; /* protects concurrent modifications */ }; -extern struct kfifo *kfifo_init(unsigned char *buffer, unsigned int size, - gfp_t gfp_mask, spinlock_t *lock); -extern struct kfifo *kfifo_alloc(unsigned int size, gfp_t gfp_mask, - spinlock_t *lock); +extern void kfifo_init(struct kfifo *fifo, unsigned char *buffer, + unsigned int size, spinlock_t *lock); +extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size, + gfp_t gfp_mask, spinlock_t *lock); extern void kfifo_free(struct kfifo *fifo); extern unsigned int __kfifo_put(struct kfifo *fifo, const unsigned char *buffer, unsigned int len); diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 7394e3bc8f4b..ff92b46f5153 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -231,7 +232,7 @@ struct iscsi_conn { }; struct iscsi_pool { - struct kfifo *queue; /* FIFO Queue */ + struct kfifo queue; /* FIFO Queue */ void **pool; /* Pool of elements */ int max; /* Max number of elements */ }; diff --git a/include/scsi/libiscsi_tcp.h b/include/scsi/libiscsi_tcp.h index 9e3182e659db..741ae7ed4394 100644 --- a/include/scsi/libiscsi_tcp.h +++ b/include/scsi/libiscsi_tcp.h @@ -80,7 +80,7 @@ struct iscsi_tcp_task { int data_offset; struct iscsi_r2t_info *r2t; /* in progress solict R2T */ struct iscsi_pool r2tpool; - struct kfifo *r2tqueue; + struct kfifo r2tqueue; void *dd_data; }; diff --git a/include/scsi/libsrp.h b/include/scsi/libsrp.h index ba615e4c1d7c..07e3adde21d9 100644 --- a/include/scsi/libsrp.h +++ b/include/scsi/libsrp.h @@ -21,7 +21,7 @@ struct srp_buf { struct srp_queue { void *pool; void *items; - struct kfifo *queue; + struct kfifo queue; spinlock_t lock; }; diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 3765ff3c1bbe..8da6bb9782bb 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -1,6 +1,7 @@ /* - * A simple kernel FIFO implementation. + * A generic kernel FIFO implementation. * + * Copyright (C) 2009 Stefani Seibold * Copyright (C) 2004 Stelian Pop * * This program is free software; you can redistribute it and/or modify @@ -26,49 +27,51 @@ #include #include +static void _kfifo_init(struct kfifo *fifo, unsigned char *buffer, + unsigned int size, spinlock_t *lock) +{ + fifo->buffer = buffer; + fifo->size = size; + fifo->lock = lock; + + kfifo_reset(fifo); +} + /** - * kfifo_init - allocates a new FIFO using a preallocated buffer + * kfifo_init - initialize a FIFO using a preallocated buffer + * @fifo: the fifo to assign the buffer * @buffer: the preallocated buffer to be used. * @size: the size of the internal buffer, this have to be a power of 2. - * @gfp_mask: get_free_pages mask, passed to kmalloc() * @lock: the lock to be used to protect the fifo buffer * - * Do NOT pass the kfifo to kfifo_free() after use! Simply free the - * &struct kfifo with kfree(). */ -struct kfifo *kfifo_init(unsigned char *buffer, unsigned int size, - gfp_t gfp_mask, spinlock_t *lock) +void kfifo_init(struct kfifo *fifo, unsigned char *buffer, unsigned int size, + spinlock_t *lock) { - struct kfifo *fifo; - /* size must be a power of 2 */ BUG_ON(!is_power_of_2(size)); - fifo = kmalloc(sizeof(struct kfifo), gfp_mask); - if (!fifo) - return ERR_PTR(-ENOMEM); - - fifo->buffer = buffer; - fifo->size = size; - fifo->in = fifo->out = 0; - fifo->lock = lock; - - return fifo; + _kfifo_init(fifo, buffer, size, lock); } EXPORT_SYMBOL(kfifo_init); /** - * kfifo_alloc - allocates a new FIFO and its internal buffer - * @size: the size of the internal buffer to be allocated. + * kfifo_alloc - allocates a new FIFO internal buffer + * @fifo: the fifo to assign then new buffer + * @size: the size of the buffer to be allocated, this have to be a power of 2. * @gfp_mask: get_free_pages mask, passed to kmalloc() * @lock: the lock to be used to protect the fifo buffer * + * This function dynamically allocates a new fifo internal buffer + * * The size will be rounded-up to a power of 2. + * The buffer will be release with kfifo_free(). + * Return 0 if no error, otherwise the an error code */ -struct kfifo *kfifo_alloc(unsigned int size, gfp_t gfp_mask, spinlock_t *lock) +int kfifo_alloc(struct kfifo *fifo, unsigned int size, gfp_t gfp_mask, + spinlock_t *lock) { unsigned char *buffer; - struct kfifo *ret; /* * round up to the next power of 2, since our 'let the indices @@ -80,26 +83,24 @@ struct kfifo *kfifo_alloc(unsigned int size, gfp_t gfp_mask, spinlock_t *lock) } buffer = kmalloc(size, gfp_mask); - if (!buffer) - return ERR_PTR(-ENOMEM); - - ret = kfifo_init(buffer, size, gfp_mask, lock); + if (!buffer) { + _kfifo_init(fifo, 0, 0, NULL); + return -ENOMEM; + } - if (IS_ERR(ret)) - kfree(buffer); + _kfifo_init(fifo, buffer, size, lock); - return ret; + return 0; } EXPORT_SYMBOL(kfifo_alloc); /** - * kfifo_free - frees the FIFO + * kfifo_free - frees the FIFO internal buffer * @fifo: the fifo to be freed. */ void kfifo_free(struct kfifo *fifo) { kfree(fifo->buffer); - kfree(fifo); } EXPORT_SYMBOL(kfifo_free); diff --git a/net/dccp/probe.c b/net/dccp/probe.c index dc328425fa20..6230ceb0823e 100644 --- a/net/dccp/probe.c +++ b/net/dccp/probe.c @@ -43,7 +43,7 @@ static int bufsize = 64 * 1024; static const char procname[] = "dccpprobe"; static struct { - struct kfifo *fifo; + struct kfifo fifo; spinlock_t lock; wait_queue_head_t wait; struct timespec tstart; @@ -67,7 +67,7 @@ static void printl(const char *fmt, ...) len += vscnprintf(tbuf+len, sizeof(tbuf)-len, fmt, args); va_end(args); - kfifo_put(dccpw.fifo, tbuf, len); + kfifo_put(&dccpw.fifo, tbuf, len); wake_up(&dccpw.wait); } @@ -109,7 +109,7 @@ static struct jprobe dccp_send_probe = { static int dccpprobe_open(struct inode *inode, struct file *file) { - kfifo_reset(dccpw.fifo); + kfifo_reset(&dccpw.fifo); getnstimeofday(&dccpw.tstart); return 0; } @@ -131,11 +131,11 @@ static ssize_t dccpprobe_read(struct file *file, char __user *buf, return -ENOMEM; error = wait_event_interruptible(dccpw.wait, - __kfifo_len(dccpw.fifo) != 0); + __kfifo_len(&dccpw.fifo) != 0); if (error) goto out_free; - cnt = kfifo_get(dccpw.fifo, tbuf, len); + cnt = kfifo_get(&dccpw.fifo, tbuf, len); error = copy_to_user(buf, tbuf, cnt) ? -EFAULT : 0; out_free: @@ -156,10 +156,8 @@ static __init int dccpprobe_init(void) init_waitqueue_head(&dccpw.wait); spin_lock_init(&dccpw.lock); - dccpw.fifo = kfifo_alloc(bufsize, GFP_KERNEL, &dccpw.lock); - if (IS_ERR(dccpw.fifo)) - return PTR_ERR(dccpw.fifo); - + if (kfifo_alloc(&dccpw.fifo, bufsize, GFP_KERNEL, &dccpw.lock)) + return ret; if (!proc_net_fops_create(&init_net, procname, S_IRUSR, &dccpprobe_fops)) goto err0; @@ -172,14 +170,14 @@ static __init int dccpprobe_init(void) err1: proc_net_remove(&init_net, procname); err0: - kfifo_free(dccpw.fifo); + kfifo_free(&dccpw.fifo); return ret; } module_init(dccpprobe_init); static __exit void dccpprobe_exit(void) { - kfifo_free(dccpw.fifo); + kfifo_free(&dccpw.fifo); proc_net_remove(&init_net, procname); unregister_jprobe(&dccp_send_probe); -- GitLab From c1e13f25674ed564948ecb7dfe5f83e578892896 Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Mon, 21 Dec 2009 14:37:27 -0800 Subject: [PATCH 510/618] kfifo: move out spinlock Move the pointer to the spinlock out of struct kfifo. Most users in tree do not actually use a spinlock, so the few exceptions now have to call kfifo_{get,put}_locked, which takes an extra argument to a spinlock. Signed-off-by: Stefani Seibold Acked-by: Greg Kroah-Hartman Acked-by: Mauro Carvalho Chehab Acked-by: Andi Kleen Acked-by: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/nozomi.c | 2 +- drivers/char/sonypi.c | 21 +++--- drivers/infiniband/hw/cxgb3/cxio_resource.c | 36 +++++----- drivers/media/video/meye.c | 35 +++++---- drivers/net/wireless/libertas/main.c | 2 +- drivers/platform/x86/fujitsu-laptop.c | 18 ++--- drivers/platform/x86/sony-laptop.c | 22 +++--- drivers/scsi/libiscsi.c | 2 +- drivers/scsi/libiscsi_tcp.c | 2 +- drivers/scsi/libsrp.c | 9 +-- drivers/usb/host/fhci.h | 2 +- drivers/usb/serial/generic.c | 4 +- drivers/usb/serial/usb-serial.c | 3 +- include/linux/kfifo.h | 80 +++++++++------------ kernel/kfifo.c | 17 ++--- net/dccp/probe.c | 6 +- 16 files changed, 131 insertions(+), 130 deletions(-) diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 0f39bec28b45..935b30d80adf 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -686,7 +686,7 @@ static int nozomi_read_config_table(struct nozomi *dc) for (i = PORT_MDM; i < MAX_PORT; i++) { kfifo_alloc(&dc->port[i].fifo_ul, - FIFO_BUFFER_SIZE_UL, GFP_ATOMIC, NULL); + FIFO_BUFFER_SIZE_UL, GFP_ATOMIC); memset(&dc->port[i].ctrl_dl, 0, sizeof(struct ctrl_dl)); memset(&dc->port[i].ctrl_ul, 0, sizeof(struct ctrl_ul)); } diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 9e6efb1f029f..dbcb3bd192c7 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -777,8 +777,9 @@ static void input_keyrelease(struct work_struct *work) { struct sonypi_keypress kp; - while (kfifo_get(&sonypi_device.input_fifo, (unsigned char *)&kp, - sizeof(kp)) == sizeof(kp)) { + while (kfifo_get_locked(&sonypi_device.input_fifo, (unsigned char *)&kp, + sizeof(kp), &sonypi_device.input_fifo_lock) + == sizeof(kp)) { msleep(10); input_report_key(kp.dev, kp.key, 0); input_sync(kp.dev); @@ -827,8 +828,9 @@ static void sonypi_report_input_event(u8 event) if (kp.dev) { input_report_key(kp.dev, kp.key, 1); input_sync(kp.dev); - kfifo_put(&sonypi_device.input_fifo, - (unsigned char *)&kp, sizeof(kp)); + kfifo_put_locked(&sonypi_device.input_fifo, + (unsigned char *)&kp, sizeof(kp), + &sonypi_device.input_fifo_lock); schedule_work(&sonypi_device.input_work); } } @@ -880,7 +882,8 @@ static irqreturn_t sonypi_irq(int irq, void *dev_id) acpi_bus_generate_proc_event(sonypi_acpi_device, 1, event); #endif - kfifo_put(&sonypi_device.fifo, (unsigned char *)&event, sizeof(event)); + kfifo_put_locked(&sonypi_device.fifo, (unsigned char *)&event, + sizeof(event), &sonypi_device.fifo_lock); kill_fasync(&sonypi_device.fifo_async, SIGIO, POLL_IN); wake_up_interruptible(&sonypi_device.fifo_proc_list); @@ -929,7 +932,8 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, return ret; while (ret < count && - (kfifo_get(&sonypi_device.fifo, &c, sizeof(c)) == sizeof(c))) { + (kfifo_get_locked(&sonypi_device.fifo, &c, sizeof(c), + &sonypi_device.fifo_lock) == sizeof(c))) { if (put_user(c, buf++)) return -EFAULT; ret++; @@ -1313,8 +1317,7 @@ static int __devinit sonypi_probe(struct platform_device *dev) "http://www.linux.it/~malattia/wiki/index.php/Sony_drivers\n"); spin_lock_init(&sonypi_device.fifo_lock); - error = kfifo_alloc(&sonypi_device.fifo, SONYPI_BUF_SIZE, GFP_KERNEL, - &sonypi_device.fifo_lock); + error = kfifo_alloc(&sonypi_device.fifo, SONYPI_BUF_SIZE, GFP_KERNEL); if (error) { printk(KERN_ERR "sonypi: kfifo_alloc failed\n"); return error; @@ -1394,7 +1397,7 @@ static int __devinit sonypi_probe(struct platform_device *dev) spin_lock_init(&sonypi_device.input_fifo_lock); error = kfifo_alloc(&sonypi_device.input_fifo, SONYPI_BUF_SIZE, - GFP_KERNEL, &sonypi_device.input_fifo_lock); + GFP_KERNEL); if (error) { printk(KERN_ERR "sonypi: kfifo_alloc failed\n"); goto err_inpdev_unregister; diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.c b/drivers/infiniband/hw/cxgb3/cxio_resource.c index 65072bdfc1bf..98f24e6d906e 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_resource.c +++ b/drivers/infiniband/hw/cxgb3/cxio_resource.c @@ -55,7 +55,7 @@ static int __cxio_init_resource_fifo(struct kfifo *fifo, u32 rarray[16]; spin_lock_init(fifo_lock); - if (kfifo_alloc(fifo, nr * sizeof(u32), GFP_KERNEL, fifo_lock)) + if (kfifo_alloc(fifo, nr * sizeof(u32), GFP_KERNEL)) return -ENOMEM; for (i = 0; i < skip_low + skip_high; i++) @@ -86,7 +86,8 @@ static int __cxio_init_resource_fifo(struct kfifo *fifo, __kfifo_put(fifo, (unsigned char *) &i, sizeof(u32)); for (i = 0; i < skip_low + skip_high; i++) - kfifo_get(fifo, (unsigned char *) &entry, sizeof(u32)); + kfifo_get_locked(fifo, (unsigned char *) &entry, + sizeof(u32), fifo_lock); return 0; } @@ -113,8 +114,7 @@ static int cxio_init_qpid_fifo(struct cxio_rdev *rdev_p) spin_lock_init(&rdev_p->rscp->qpid_fifo_lock); if (kfifo_alloc(&rdev_p->rscp->qpid_fifo, T3_MAX_NUM_QP * sizeof(u32), - GFP_KERNEL, - &rdev_p->rscp->qpid_fifo_lock)) + GFP_KERNEL)) return -ENOMEM; for (i = 16; i < T3_MAX_NUM_QP; i++) @@ -177,33 +177,37 @@ int cxio_hal_init_resource(struct cxio_rdev *rdev_p, /* * returns 0 if no resource available */ -static u32 cxio_hal_get_resource(struct kfifo *fifo) +static u32 cxio_hal_get_resource(struct kfifo *fifo, spinlock_t * lock) { u32 entry; - if (kfifo_get(fifo, (unsigned char *) &entry, sizeof(u32))) + if (kfifo_get_locked(fifo, (unsigned char *) &entry, sizeof(u32), lock)) return entry; else return 0; /* fifo emptry */ } -static void cxio_hal_put_resource(struct kfifo *fifo, u32 entry) +static void cxio_hal_put_resource(struct kfifo *fifo, spinlock_t * lock, + u32 entry) { - BUG_ON(kfifo_put(fifo, (unsigned char *) &entry, sizeof(u32)) == 0); + BUG_ON( + kfifo_put_locked(fifo, (unsigned char *) &entry, sizeof(u32), lock) + == 0); } u32 cxio_hal_get_stag(struct cxio_hal_resource *rscp) { - return cxio_hal_get_resource(&rscp->tpt_fifo); + return cxio_hal_get_resource(&rscp->tpt_fifo, &rscp->tpt_fifo_lock); } void cxio_hal_put_stag(struct cxio_hal_resource *rscp, u32 stag) { - cxio_hal_put_resource(&rscp->tpt_fifo, stag); + cxio_hal_put_resource(&rscp->tpt_fifo, &rscp->tpt_fifo_lock, stag); } u32 cxio_hal_get_qpid(struct cxio_hal_resource *rscp) { - u32 qpid = cxio_hal_get_resource(&rscp->qpid_fifo); + u32 qpid = cxio_hal_get_resource(&rscp->qpid_fifo, + &rscp->qpid_fifo_lock); PDBG("%s qpid 0x%x\n", __func__, qpid); return qpid; } @@ -211,27 +215,27 @@ u32 cxio_hal_get_qpid(struct cxio_hal_resource *rscp) void cxio_hal_put_qpid(struct cxio_hal_resource *rscp, u32 qpid) { PDBG("%s qpid 0x%x\n", __func__, qpid); - cxio_hal_put_resource(&rscp->qpid_fifo, qpid); + cxio_hal_put_resource(&rscp->qpid_fifo, &rscp->qpid_fifo_lock, qpid); } u32 cxio_hal_get_cqid(struct cxio_hal_resource *rscp) { - return cxio_hal_get_resource(&rscp->cqid_fifo); + return cxio_hal_get_resource(&rscp->cqid_fifo, &rscp->cqid_fifo_lock); } void cxio_hal_put_cqid(struct cxio_hal_resource *rscp, u32 cqid) { - cxio_hal_put_resource(&rscp->cqid_fifo, cqid); + cxio_hal_put_resource(&rscp->cqid_fifo, &rscp->cqid_fifo_lock, cqid); } u32 cxio_hal_get_pdid(struct cxio_hal_resource *rscp) { - return cxio_hal_get_resource(&rscp->pdid_fifo); + return cxio_hal_get_resource(&rscp->pdid_fifo, &rscp->pdid_fifo_lock); } void cxio_hal_put_pdid(struct cxio_hal_resource *rscp, u32 pdid) { - cxio_hal_put_resource(&rscp->pdid_fifo, pdid); + cxio_hal_put_resource(&rscp->pdid_fifo, &rscp->pdid_fifo_lock, pdid); } void cxio_hal_destroy_resource(struct cxio_hal_resource *rscp) diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index dacbbb839b9e..38bcedfd9fec 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -800,8 +800,8 @@ static irqreturn_t meye_irq(int irq, void *dev_id) return IRQ_HANDLED; if (meye.mchip_mode == MCHIP_HIC_MODE_CONT_OUT) { - if (kfifo_get(&meye.grabq, (unsigned char *)&reqnr, - sizeof(int)) != sizeof(int)) { + if (kfifo_get_locked(&meye.grabq, (unsigned char *)&reqnr, + sizeof(int), &meye.grabq_lock) != sizeof(int)) { mchip_free_frame(); return IRQ_HANDLED; } @@ -811,7 +811,8 @@ static irqreturn_t meye_irq(int irq, void *dev_id) meye.grab_buffer[reqnr].state = MEYE_BUF_DONE; do_gettimeofday(&meye.grab_buffer[reqnr].timestamp); meye.grab_buffer[reqnr].sequence = sequence++; - kfifo_put(&meye.doneq, (unsigned char *)&reqnr, sizeof(int)); + kfifo_put_locked(&meye.doneq, (unsigned char *)&reqnr, + sizeof(int), &meye.doneq_lock); wake_up_interruptible(&meye.proc_list); } else { int size; @@ -820,8 +821,8 @@ static irqreturn_t meye_irq(int irq, void *dev_id) mchip_free_frame(); goto again; } - if (kfifo_get(&meye.grabq, (unsigned char *)&reqnr, - sizeof(int)) != sizeof(int)) { + if (kfifo_get_locked(&meye.grabq, (unsigned char *)&reqnr, + sizeof(int), &meye.grabq_lock) != sizeof(int)) { mchip_free_frame(); goto again; } @@ -831,7 +832,8 @@ static irqreturn_t meye_irq(int irq, void *dev_id) meye.grab_buffer[reqnr].state = MEYE_BUF_DONE; do_gettimeofday(&meye.grab_buffer[reqnr].timestamp); meye.grab_buffer[reqnr].sequence = sequence++; - kfifo_put(&meye.doneq, (unsigned char *)&reqnr, sizeof(int)); + kfifo_put_locked(&meye.doneq, (unsigned char *)&reqnr, + sizeof(int), &meye.doneq_lock); wake_up_interruptible(&meye.proc_list); } mchip_free_frame(); @@ -933,7 +935,8 @@ static int meyeioc_qbuf_capt(int *nb) mchip_cont_compression_start(); meye.grab_buffer[*nb].state = MEYE_BUF_USING; - kfifo_put(&meye.grabq, (unsigned char *)nb, sizeof(int)); + kfifo_put_locked(&meye.grabq, (unsigned char *)nb, sizeof(int), + &meye.grabq_lock); mutex_unlock(&meye.lock); return 0; @@ -965,7 +968,8 @@ static int meyeioc_sync(struct file *file, void *fh, int *i) /* fall through */ case MEYE_BUF_DONE: meye.grab_buffer[*i].state = MEYE_BUF_UNUSED; - kfifo_get(&meye.doneq, (unsigned char *)&unused, sizeof(int)); + kfifo_get_locked(&meye.doneq, (unsigned char *)&unused, + sizeof(int), &meye.doneq_lock); } *i = meye.grab_buffer[*i].size; mutex_unlock(&meye.lock); @@ -1452,7 +1456,8 @@ static int vidioc_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) buf->flags |= V4L2_BUF_FLAG_QUEUED; buf->flags &= ~V4L2_BUF_FLAG_DONE; meye.grab_buffer[buf->index].state = MEYE_BUF_USING; - kfifo_put(&meye.grabq, (unsigned char *)&buf->index, sizeof(int)); + kfifo_put_locked(&meye.grabq, (unsigned char *)&buf->index, + sizeof(int), &meye.grabq_lock); mutex_unlock(&meye.lock); return 0; @@ -1478,8 +1483,8 @@ static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) return -EINTR; } - if (!kfifo_get(&meye.doneq, (unsigned char *)&reqnr, - sizeof(int))) { + if (!kfifo_get_locked(&meye.doneq, (unsigned char *)&reqnr, + sizeof(int), &meye.doneq_lock)) { mutex_unlock(&meye.lock); return -EBUSY; } @@ -1745,14 +1750,14 @@ static int __devinit meye_probe(struct pci_dev *pcidev, } spin_lock_init(&meye.grabq_lock); - if (kfifo_alloc(&meye.grabq, sizeof(int) * MEYE_MAX_BUFNBRS, GFP_KERNEL, - &meye.grabq_lock)) { + if (kfifo_alloc(&meye.grabq, sizeof(int) * MEYE_MAX_BUFNBRS, + GFP_KERNEL)) { printk(KERN_ERR "meye: fifo allocation failed\n"); goto outkfifoalloc1; } spin_lock_init(&meye.doneq_lock); - if (kfifo_alloc(&meye.doneq, sizeof(int) * MEYE_MAX_BUFNBRS, GFP_KERNEL, - &meye.doneq_lock)) { + if (kfifo_alloc(&meye.doneq, sizeof(int) * MEYE_MAX_BUFNBRS, + GFP_KERNEL)) { printk(KERN_ERR "meye: fifo allocation failed\n"); goto outkfifoalloc2; } diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 403909287414..2cc7ecd8d123 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -883,7 +883,7 @@ static int lbs_init_adapter(struct lbs_private *priv) priv->resp_len[0] = priv->resp_len[1] = 0; /* Create the event FIFO */ - ret = kfifo_alloc(&priv->event_fifo, sizeof(u32) * 16, GFP_KERNEL, NULL); + ret = kfifo_alloc(&priv->event_fifo, sizeof(u32) * 16, GFP_KERNEL); if (ret) { lbs_pr_err("Out of memory allocating event FIFO buffer\n"); goto out; diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index f999fba0e25e..13dc7bedcfce 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -825,7 +825,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) /* kfifo */ spin_lock_init(&fujitsu_hotkey->fifo_lock); error = kfifo_alloc(&fujitsu_hotkey->fifo, RINGBUFFERSIZE * sizeof(int), - GFP_KERNEL, &fujitsu_hotkey->fifo_lock); + GFP_KERNEL); if (error) { printk(KERN_ERR "kfifo_alloc failed\n"); goto err_stop; @@ -1006,9 +1006,10 @@ static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event) vdbg_printk(FUJLAPTOP_DBG_TRACE, "Push keycode into ringbuffer [%d]\n", keycode); - status = kfifo_put(&fujitsu_hotkey->fifo, + status = kfifo_put_locked(&fujitsu_hotkey->fifo, (unsigned char *)&keycode, - sizeof(keycode)); + sizeof(keycode), + &fujitsu_hotkey->fifo_lock); if (status != sizeof(keycode)) { vdbg_printk(FUJLAPTOP_DBG_WARN, "Could not push keycode [0x%x]\n", @@ -1019,11 +1020,12 @@ static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event) } } else if (keycode == 0) { while ((status = - kfifo_get - (&fujitsu_hotkey->fifo, (unsigned char *) - &keycode_r, - sizeof - (keycode_r))) == sizeof(keycode_r)) { + kfifo_get_locked( + &fujitsu_hotkey->fifo, + (unsigned char *) &keycode_r, + sizeof(keycode_r), + &fujitsu_hotkey->fifo_lock)) + == sizeof(keycode_r)) { input_report_key(input, keycode_r, 0); input_sync(input); vdbg_printk(FUJLAPTOP_DBG_TRACE, diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 04625a048e74..1538a0a3c0af 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -300,8 +300,9 @@ static void do_sony_laptop_release_key(struct work_struct *work) { struct sony_laptop_keypress kp; - while (kfifo_get(&sony_laptop_input.fifo, (unsigned char *)&kp, - sizeof(kp)) == sizeof(kp)) { + while (kfifo_get_locked(&sony_laptop_input.fifo, (unsigned char *)&kp, + sizeof(kp), &sony_laptop_input.fifo_lock) + == sizeof(kp)) { msleep(10); input_report_key(kp.dev, kp.key, 0); input_sync(kp.dev); @@ -362,8 +363,9 @@ static void sony_laptop_report_input_event(u8 event) /* we emit the scancode so we can always remap the key */ input_event(kp.dev, EV_MSC, MSC_SCAN, event); input_sync(kp.dev); - kfifo_put(&sony_laptop_input.fifo, - (unsigned char *)&kp, sizeof(kp)); + kfifo_put_locked(&sony_laptop_input.fifo, + (unsigned char *)&kp, sizeof(kp), + &sony_laptop_input.fifo_lock); if (!work_pending(&sony_laptop_release_key_work)) queue_work(sony_laptop_input.wq, @@ -386,8 +388,7 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device) /* kfifo */ spin_lock_init(&sony_laptop_input.fifo_lock); error = - kfifo_alloc(&sony_laptop_input.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL, - &sony_laptop_input.fifo_lock); + kfifo_alloc(&sony_laptop_input.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL); if (error) { printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n"); goto err_dec_users; @@ -2129,7 +2130,8 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, return ret; while (ret < count && - (kfifo_get(&sonypi_compat.fifo, &c, sizeof(c)) == sizeof(c))) { + (kfifo_get_locked(&sonypi_compat.fifo, &c, sizeof(c), + &sonypi_compat.fifo_lock) == sizeof(c))) { if (put_user(c, buf++)) return -EFAULT; ret++; @@ -2308,7 +2310,8 @@ static struct miscdevice sonypi_misc_device = { static void sonypi_compat_report_event(u8 event) { - kfifo_put(&sonypi_compat.fifo, (unsigned char *)&event, sizeof(event)); + kfifo_put_locked(&sonypi_compat.fifo, (unsigned char *)&event, + sizeof(event), &sonypi_compat.fifo_lock); kill_fasync(&sonypi_compat.fifo_async, SIGIO, POLL_IN); wake_up_interruptible(&sonypi_compat.fifo_proc_list); } @@ -2319,8 +2322,7 @@ static int sonypi_compat_init(void) spin_lock_init(&sonypi_compat.fifo_lock); error = - kfifo_alloc(&sonypi_compat.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL, - &sonypi_compat.fifo_lock); + kfifo_alloc(&sonypi_compat.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL); if (error) { printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n"); return error; diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index cf0aa7e90be9..1bccbc1e588e 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -2461,7 +2461,7 @@ iscsi_pool_init(struct iscsi_pool *q, int max, void ***items, int item_size) if (q->pool == NULL) return -ENOMEM; - kfifo_init(&q->queue, (void*)q->pool, max * sizeof(void*), NULL); + kfifo_init(&q->queue, (void*)q->pool, max * sizeof(void*)); for (i = 0; i < max; i++) { q->pool[i] = kzalloc(item_size, GFP_KERNEL); diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index a83ee56a185e..41643c860d26 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -1128,7 +1128,7 @@ int iscsi_tcp_r2tpool_alloc(struct iscsi_session *session) /* R2T xmit queue */ if (kfifo_alloc(&tcp_task->r2tqueue, - session->max_r2t * 4 * sizeof(void*), GFP_KERNEL, NULL)) { + session->max_r2t * 4 * sizeof(void*), GFP_KERNEL)) { iscsi_pool_free(&tcp_task->r2tpool); goto r2t_alloc_fail; } diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c index b1b5e51ca8e3..db1b41c55fd3 100644 --- a/drivers/scsi/libsrp.c +++ b/drivers/scsi/libsrp.c @@ -58,8 +58,7 @@ static int srp_iu_pool_alloc(struct srp_queue *q, size_t max, goto free_pool; spin_lock_init(&q->lock); - kfifo_init(&q->queue, (void *) q->pool, max * sizeof(void *), - &q->lock); + kfifo_init(&q->queue, (void *) q->pool, max * sizeof(void *)); for (i = 0, iue = q->items; i < max; i++) { __kfifo_put(&q->queue, (void *) &iue, sizeof(void *)); @@ -164,7 +163,8 @@ struct iu_entry *srp_iu_get(struct srp_target *target) { struct iu_entry *iue = NULL; - kfifo_get(&target->iu_queue.queue, (void *) &iue, sizeof(void *)); + kfifo_get_locked(&target->iu_queue.queue, (void *) &iue, + sizeof(void *), &target->iu_queue.lock); if (!iue) return iue; iue->target = target; @@ -176,7 +176,8 @@ EXPORT_SYMBOL_GPL(srp_iu_get); void srp_iu_put(struct iu_entry *iue) { - kfifo_put(&iue->target->iu_queue.queue, (void *) &iue, sizeof(void *)); + kfifo_put_locked(&iue->target->iu_queue.queue, (void *) &iue, + sizeof(void *), &iue->target->iu_queue.lock); } EXPORT_SYMBOL_GPL(srp_iu_put); diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h index 2277428ef5d3..a76da201183b 100644 --- a/drivers/usb/host/fhci.h +++ b/drivers/usb/host/fhci.h @@ -495,7 +495,7 @@ static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci) /* fifo of pointers */ static inline int cq_new(struct kfifo *fifo, int size) { - return kfifo_alloc(fifo, size * sizeof(void *), GFP_KERNEL, NULL); + return kfifo_alloc(fifo, size * sizeof(void *), GFP_KERNEL); } static inline void cq_delete(struct kfifo *kfifo) diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index bbe005cefcfb..61eef18218be 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -285,7 +285,7 @@ static int usb_serial_generic_write_start(struct usb_serial_port *port) return 0; data = port->write_urb->transfer_buffer; - count = kfifo_get(port->write_fifo, data, port->bulk_out_size); + count = kfifo_get_locked(port->write_fifo, data, port->bulk_out_size, &port->lock); usb_serial_debug_data(debug, &port->dev, __func__, count, data); /* set up our urb */ @@ -345,7 +345,7 @@ int usb_serial_generic_write(struct tty_struct *tty, return usb_serial_multi_urb_write(tty, port, buf, count); - count = kfifo_put(port->write_fifo, buf, count); + count = kfifo_put_locked(port->write_fifo, buf, count, &port->lock); result = usb_serial_generic_write_start(port); if (result >= 0) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 44b72d47fac2..636a4f23445e 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -939,8 +939,7 @@ int usb_serial_probe(struct usb_interface *interface, dev_err(&interface->dev, "No free urbs available\n"); goto probe_error; } - if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL, - &port->lock)) + if (kfifo_alloc(port->write_fifo, PAGE_SIZE, GFP_KERNEL)) goto probe_error; buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); port->bulk_out_size = buffer_size; diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index c3f8d82efd34..e0f5c9d4197d 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -30,13 +30,12 @@ struct kfifo { unsigned int size; /* the size of the allocated buffer */ unsigned int in; /* data is added at offset (in % size) */ unsigned int out; /* data is extracted from off. (out % size) */ - spinlock_t *lock; /* protects concurrent modifications */ }; extern void kfifo_init(struct kfifo *fifo, unsigned char *buffer, - unsigned int size, spinlock_t *lock); + unsigned int size); extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size, - gfp_t gfp_mask, spinlock_t *lock); + gfp_t gfp_mask); extern void kfifo_free(struct kfifo *fifo); extern unsigned int __kfifo_put(struct kfifo *fifo, const unsigned char *buffer, unsigned int len); @@ -58,58 +57,67 @@ static inline void __kfifo_reset(struct kfifo *fifo) */ static inline void kfifo_reset(struct kfifo *fifo) { - unsigned long flags; - - spin_lock_irqsave(fifo->lock, flags); - __kfifo_reset(fifo); +} + +/** + * __kfifo_len - returns the number of bytes available in the FIFO + * @fifo: the fifo to be used. + */ +static inline unsigned int __kfifo_len(struct kfifo *fifo) +{ + register unsigned int out; - spin_unlock_irqrestore(fifo->lock, flags); + out = fifo->out; + smp_rmb(); + return fifo->in - out; } /** - * kfifo_put - puts some data into the FIFO + * kfifo_put_locked - puts some data into the FIFO using a spinlock for locking * @fifo: the fifo to be used. - * @buffer: the data to be added. - * @len: the length of the data to be added. + * @from: the data to be added. + * @n: the length of the data to be added. + * @lock: pointer to the spinlock to use for locking. * - * This function copies at most @len bytes from the @buffer into + * This function copies at most @len bytes from the @from buffer into * the FIFO depending on the free space, and returns the number of * bytes copied. */ -static inline unsigned int kfifo_put(struct kfifo *fifo, - const unsigned char *buffer, unsigned int len) +static inline __must_check unsigned int kfifo_put_locked(struct kfifo *fifo, + const unsigned char *from, unsigned int n, spinlock_t *lock) { unsigned long flags; unsigned int ret; - spin_lock_irqsave(fifo->lock, flags); + spin_lock_irqsave(lock, flags); - ret = __kfifo_put(fifo, buffer, len); + ret = __kfifo_put(fifo, from, n); - spin_unlock_irqrestore(fifo->lock, flags); + spin_unlock_irqrestore(lock, flags); return ret; } /** - * kfifo_get - gets some data from the FIFO + * kfifo_get_locked - gets some data from the FIFO using a spinlock for locking * @fifo: the fifo to be used. - * @buffer: where the data must be copied. - * @len: the size of the destination buffer. + * @to: where the data must be copied. + * @n: the size of the destination buffer. + * @lock: pointer to the spinlock to use for locking. * * This function copies at most @len bytes from the FIFO into the - * @buffer and returns the number of copied bytes. + * @to buffer and returns the number of copied bytes. */ -static inline unsigned int kfifo_get(struct kfifo *fifo, - unsigned char *buffer, unsigned int len) +static inline __must_check unsigned int kfifo_get_locked(struct kfifo *fifo, + unsigned char *to, unsigned int n, spinlock_t *lock) { unsigned long flags; unsigned int ret; - spin_lock_irqsave(fifo->lock, flags); + spin_lock_irqsave(lock, flags); - ret = __kfifo_get(fifo, buffer, len); + ret = __kfifo_get(fifo, to, n); /* * optimization: if the FIFO is empty, set the indices to 0 @@ -118,36 +126,18 @@ static inline unsigned int kfifo_get(struct kfifo *fifo, if (fifo->in == fifo->out) fifo->in = fifo->out = 0; - spin_unlock_irqrestore(fifo->lock, flags); + spin_unlock_irqrestore(lock, flags); return ret; } -/** - * __kfifo_len - returns the number of bytes available in the FIFO, no locking version - * @fifo: the fifo to be used. - */ -static inline unsigned int __kfifo_len(struct kfifo *fifo) -{ - return fifo->in - fifo->out; -} - /** * kfifo_len - returns the number of bytes available in the FIFO * @fifo: the fifo to be used. */ static inline unsigned int kfifo_len(struct kfifo *fifo) { - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(fifo->lock, flags); - - ret = __kfifo_len(fifo); - - spin_unlock_irqrestore(fifo->lock, flags); - - return ret; + return __kfifo_len(fifo); } #endif diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 8da6bb9782bb..4950bdbe3477 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -28,11 +28,10 @@ #include static void _kfifo_init(struct kfifo *fifo, unsigned char *buffer, - unsigned int size, spinlock_t *lock) + unsigned int size) { fifo->buffer = buffer; fifo->size = size; - fifo->lock = lock; kfifo_reset(fifo); } @@ -42,16 +41,14 @@ static void _kfifo_init(struct kfifo *fifo, unsigned char *buffer, * @fifo: the fifo to assign the buffer * @buffer: the preallocated buffer to be used. * @size: the size of the internal buffer, this have to be a power of 2. - * @lock: the lock to be used to protect the fifo buffer * */ -void kfifo_init(struct kfifo *fifo, unsigned char *buffer, unsigned int size, - spinlock_t *lock) +void kfifo_init(struct kfifo *fifo, unsigned char *buffer, unsigned int size) { /* size must be a power of 2 */ BUG_ON(!is_power_of_2(size)); - _kfifo_init(fifo, buffer, size, lock); + _kfifo_init(fifo, buffer, size); } EXPORT_SYMBOL(kfifo_init); @@ -60,7 +57,6 @@ EXPORT_SYMBOL(kfifo_init); * @fifo: the fifo to assign then new buffer * @size: the size of the buffer to be allocated, this have to be a power of 2. * @gfp_mask: get_free_pages mask, passed to kmalloc() - * @lock: the lock to be used to protect the fifo buffer * * This function dynamically allocates a new fifo internal buffer * @@ -68,8 +64,7 @@ EXPORT_SYMBOL(kfifo_init); * The buffer will be release with kfifo_free(). * Return 0 if no error, otherwise the an error code */ -int kfifo_alloc(struct kfifo *fifo, unsigned int size, gfp_t gfp_mask, - spinlock_t *lock) +int kfifo_alloc(struct kfifo *fifo, unsigned int size, gfp_t gfp_mask) { unsigned char *buffer; @@ -84,11 +79,11 @@ int kfifo_alloc(struct kfifo *fifo, unsigned int size, gfp_t gfp_mask, buffer = kmalloc(size, gfp_mask); if (!buffer) { - _kfifo_init(fifo, 0, 0, NULL); + _kfifo_init(fifo, 0, 0); return -ENOMEM; } - _kfifo_init(fifo, buffer, size, lock); + _kfifo_init(fifo, buffer, size); return 0; } diff --git a/net/dccp/probe.c b/net/dccp/probe.c index 6230ceb0823e..c6b50351aa78 100644 --- a/net/dccp/probe.c +++ b/net/dccp/probe.c @@ -67,7 +67,7 @@ static void printl(const char *fmt, ...) len += vscnprintf(tbuf+len, sizeof(tbuf)-len, fmt, args); va_end(args); - kfifo_put(&dccpw.fifo, tbuf, len); + kfifo_put_locked(&dccpw.fifo, tbuf, len, &dccpw.lock); wake_up(&dccpw.wait); } @@ -135,7 +135,7 @@ static ssize_t dccpprobe_read(struct file *file, char __user *buf, if (error) goto out_free; - cnt = kfifo_get(&dccpw.fifo, tbuf, len); + cnt = kfifo_get_locked(&dccpw.fifo, tbuf, len, &dccpw.lock); error = copy_to_user(buf, tbuf, cnt) ? -EFAULT : 0; out_free: @@ -156,7 +156,7 @@ static __init int dccpprobe_init(void) init_waitqueue_head(&dccpw.wait); spin_lock_init(&dccpw.lock); - if (kfifo_alloc(&dccpw.fifo, bufsize, GFP_KERNEL, &dccpw.lock)) + if (kfifo_alloc(&dccpw.fifo, bufsize, GFP_KERNEL)) return ret; if (!proc_net_fops_create(&init_net, procname, S_IRUSR, &dccpprobe_fops)) goto err0; -- GitLab From e64c026dd09b73faf20707711402fc5ed55a8e70 Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Mon, 21 Dec 2009 14:37:28 -0800 Subject: [PATCH 511/618] kfifo: cleanup namespace change name of __kfifo_* functions to kfifo_*, because the prefix __kfifo should be reserved for internal functions only. Signed-off-by: Stefani Seibold Acked-by: Greg Kroah-Hartman Acked-by: Mauro Carvalho Chehab Acked-by: Andi Kleen Acked-by: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/nozomi.c | 12 ++++---- drivers/infiniband/hw/cxgb3/cxio_resource.c | 10 +++---- drivers/net/wireless/libertas/cmd.c | 4 +-- drivers/net/wireless/libertas/main.c | 8 +++--- drivers/platform/x86/sony-laptop.c | 2 +- drivers/scsi/libiscsi.c | 14 ++++----- drivers/scsi/libiscsi_tcp.c | 20 ++++++------- drivers/scsi/libsrp.c | 2 +- drivers/usb/host/fhci.h | 6 ++-- drivers/usb/serial/generic.c | 4 +-- include/linux/kfifo.h | 32 +++++---------------- kernel/kfifo.c | 12 ++++---- net/dccp/probe.c | 2 +- 13 files changed, 55 insertions(+), 73 deletions(-) diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 935b30d80adf..61f5bfe74f38 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -798,7 +798,7 @@ static int send_data(enum port_type index, struct nozomi *dc) struct tty_struct *tty = tty_port_tty_get(&port->port); /* Get data from tty and place in buf for now */ - size = __kfifo_get(&port->fifo_ul, dc->send_buf, + size = kfifo_get(&port->fifo_ul, dc->send_buf, ul_size < SEND_BUF_MAX ? ul_size : SEND_BUF_MAX); if (size == 0) { @@ -988,11 +988,11 @@ static int receive_flow_control(struct nozomi *dc) } else if (old_ctrl.CTS == 0 && ctrl_dl.CTS == 1) { - if (__kfifo_len(&dc->port[port].fifo_ul)) { + if (kfifo_len(&dc->port[port].fifo_ul)) { DBG1("Enable interrupt (0x%04X) on port: %d", enable_ier, port); DBG1("Data in buffer [%d], enable transmit! ", - __kfifo_len(&dc->port[port].fifo_ul)); + kfifo_len(&dc->port[port].fifo_ul)); enable_transmit_ul(port, dc); } else { DBG1("No data in buffer..."); @@ -1672,7 +1672,7 @@ static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, goto exit; } - rval = __kfifo_put(&port->fifo_ul, (unsigned char *)buffer, count); + rval = kfifo_put(&port->fifo_ul, (unsigned char *)buffer, count); /* notify card */ if (unlikely(dc == NULL)) { @@ -1720,7 +1720,7 @@ static int ntty_write_room(struct tty_struct *tty) if (!port->port.count) goto exit; - room = port->fifo_ul.size - __kfifo_len(&port->fifo_ul); + room = port->fifo_ul.size - kfifo_len(&port->fifo_ul); exit: mutex_unlock(&port->tty_sem); @@ -1877,7 +1877,7 @@ static s32 ntty_chars_in_buffer(struct tty_struct *tty) goto exit_in_buffer; } - rval = __kfifo_len(&port->fifo_ul); + rval = kfifo_len(&port->fifo_ul); exit_in_buffer: return rval; diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.c b/drivers/infiniband/hw/cxgb3/cxio_resource.c index 98f24e6d906e..d7d18fb02c93 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_resource.c +++ b/drivers/infiniband/hw/cxgb3/cxio_resource.c @@ -59,7 +59,7 @@ static int __cxio_init_resource_fifo(struct kfifo *fifo, return -ENOMEM; for (i = 0; i < skip_low + skip_high; i++) - __kfifo_put(fifo, (unsigned char *) &entry, sizeof(u32)); + kfifo_put(fifo, (unsigned char *) &entry, sizeof(u32)); if (random) { j = 0; random_bytes = random32(); @@ -71,19 +71,19 @@ static int __cxio_init_resource_fifo(struct kfifo *fifo, random_bytes = random32(); } idx = (random_bytes >> (j * 2)) & 0xF; - __kfifo_put(fifo, + kfifo_put(fifo, (unsigned char *) &rarray[idx], sizeof(u32)); rarray[idx] = i; j++; } for (i = 0; i < RANDOM_SIZE; i++) - __kfifo_put(fifo, + kfifo_put(fifo, (unsigned char *) &rarray[i], sizeof(u32)); } else for (i = skip_low; i < nr - skip_high; i++) - __kfifo_put(fifo, (unsigned char *) &i, sizeof(u32)); + kfifo_put(fifo, (unsigned char *) &i, sizeof(u32)); for (i = 0; i < skip_low + skip_high; i++) kfifo_get_locked(fifo, (unsigned char *) &entry, @@ -119,7 +119,7 @@ static int cxio_init_qpid_fifo(struct cxio_rdev *rdev_p) for (i = 16; i < T3_MAX_NUM_QP; i++) if (!(i & rdev_p->qpmask)) - __kfifo_put(&rdev_p->rscp->qpid_fifo, + kfifo_put(&rdev_p->rscp->qpid_fifo, (unsigned char *) &i, sizeof(u32)); return 0; } diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index ffed17f4f506..42611bea76a3 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1365,7 +1365,7 @@ static void lbs_send_confirmsleep(struct lbs_private *priv) priv->dnld_sent = DNLD_RES_RECEIVED; /* If nothing to do, go back to sleep (?) */ - if (!__kfifo_len(&priv->event_fifo) && !priv->resp_len[priv->resp_idx]) + if (!kfifo_len(&priv->event_fifo) && !priv->resp_len[priv->resp_idx]) priv->psstate = PS_STATE_SLEEP; spin_unlock_irqrestore(&priv->driver_lock, flags); @@ -1439,7 +1439,7 @@ void lbs_ps_confirm_sleep(struct lbs_private *priv) } /* Pending events or command responses? */ - if (__kfifo_len(&priv->event_fifo) || priv->resp_len[priv->resp_idx]) { + if (kfifo_len(&priv->event_fifo) || priv->resp_len[priv->resp_idx]) { allowed = 0; lbs_deb_host("pending events or command responses\n"); } diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 2cc7ecd8d123..0622104f0a03 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -459,7 +459,7 @@ static int lbs_thread(void *data) else if (!list_empty(&priv->cmdpendingq) && !(priv->wakeup_dev_required)) shouldsleep = 0; /* We have a command to send */ - else if (__kfifo_len(&priv->event_fifo)) + else if (kfifo_len(&priv->event_fifo)) shouldsleep = 0; /* We have an event to process */ else shouldsleep = 1; /* No command */ @@ -511,9 +511,9 @@ static int lbs_thread(void *data) /* Process hardware events, e.g. card removed, link lost */ spin_lock_irq(&priv->driver_lock); - while (__kfifo_len(&priv->event_fifo)) { + while (kfifo_len(&priv->event_fifo)) { u32 event; - __kfifo_get(&priv->event_fifo, (unsigned char *) &event, + kfifo_get(&priv->event_fifo, (unsigned char *) &event, sizeof(event)); spin_unlock_irq(&priv->driver_lock); lbs_process_event(priv, event); @@ -1175,7 +1175,7 @@ void lbs_queue_event(struct lbs_private *priv, u32 event) if (priv->psstate == PS_STATE_SLEEP) priv->psstate = PS_STATE_AWAKE; - __kfifo_put(&priv->event_fifo, (unsigned char *) &event, sizeof(u32)); + kfifo_put(&priv->event_fifo, (unsigned char *) &event, sizeof(u32)); wake_up_interruptible(&priv->waitq); diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 1538a0a3c0af..36e5dc6fc953 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -2107,7 +2107,7 @@ static int sonypi_misc_open(struct inode *inode, struct file *file) spin_lock_irqsave(&sonypi_compat.fifo_lock, flags); if (atomic_inc_return(&sonypi_compat.open_count) == 1) - __kfifo_reset(&sonypi_compat.fifo); + kfifo_reset(&sonypi_compat.fifo); spin_unlock_irqrestore(&sonypi_compat.fifo_lock, flags); diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 1bccbc1e588e..5f0c46f43ee1 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -517,7 +517,7 @@ static void iscsi_free_task(struct iscsi_task *task) if (conn->login_task == task) return; - __kfifo_put(&session->cmdpool.queue, (void*)&task, sizeof(void*)); + kfifo_put(&session->cmdpool.queue, (void*)&task, sizeof(void*)); if (sc) { task->sc = NULL; @@ -737,7 +737,7 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE); BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED); - if (!__kfifo_get(&session->cmdpool.queue, + if (!kfifo_get(&session->cmdpool.queue, (void*)&task, sizeof(void*))) return NULL; } @@ -1567,7 +1567,7 @@ static inline struct iscsi_task *iscsi_alloc_task(struct iscsi_conn *conn, { struct iscsi_task *task; - if (!__kfifo_get(&conn->session->cmdpool.queue, + if (!kfifo_get(&conn->session->cmdpool.queue, (void *) &task, sizeof(void *))) return NULL; @@ -2469,7 +2469,7 @@ iscsi_pool_init(struct iscsi_pool *q, int max, void ***items, int item_size) q->max = i; goto enomem; } - __kfifo_put(&q->queue, (void*)&q->pool[i], sizeof(void*)); + kfifo_put(&q->queue, (void*)&q->pool[i], sizeof(void*)); } if (items) { @@ -2819,7 +2819,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, int dd_size, /* allocate login_task used for the login/text sequences */ spin_lock_bh(&session->lock); - if (!__kfifo_get(&session->cmdpool.queue, + if (!kfifo_get(&session->cmdpool.queue, (void*)&conn->login_task, sizeof(void*))) { spin_unlock_bh(&session->lock); @@ -2839,7 +2839,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, int dd_size, return cls_conn; login_task_data_alloc_fail: - __kfifo_put(&session->cmdpool.queue, (void*)&conn->login_task, + kfifo_put(&session->cmdpool.queue, (void*)&conn->login_task, sizeof(void*)); login_task_alloc_fail: iscsi_destroy_conn(cls_conn); @@ -2902,7 +2902,7 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) free_pages((unsigned long) conn->data, get_order(ISCSI_DEF_MAX_RECV_SEG_LEN)); kfree(conn->persistent_address); - __kfifo_put(&session->cmdpool.queue, (void*)&conn->login_task, + kfifo_put(&session->cmdpool.queue, (void*)&conn->login_task, sizeof(void*)); if (session->leadconn == conn) session->leadconn = NULL; diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index 41643c860d26..c0be926637b1 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -445,15 +445,15 @@ void iscsi_tcp_cleanup_task(struct iscsi_task *task) return; /* flush task's r2t queues */ - while (__kfifo_get(&tcp_task->r2tqueue, (void*)&r2t, sizeof(void*))) { - __kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, + while (kfifo_get(&tcp_task->r2tqueue, (void*)&r2t, sizeof(void*))) { + kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); ISCSI_DBG_TCP(task->conn, "pending r2t dropped\n"); } r2t = tcp_task->r2t; if (r2t != NULL) { - __kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, + kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); tcp_task->r2t = NULL; } @@ -541,7 +541,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) return 0; } - rc = __kfifo_get(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); + rc = kfifo_get(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); if (!rc) { iscsi_conn_printk(KERN_ERR, conn, "Could not allocate R2T. " "Target has sent more R2Ts than it " @@ -554,7 +554,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) if (r2t->data_length == 0) { iscsi_conn_printk(KERN_ERR, conn, "invalid R2T with zero data len\n"); - __kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, + kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); return ISCSI_ERR_DATALEN; } @@ -570,7 +570,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) "invalid R2T with data len %u at offset %u " "and total length %d\n", r2t->data_length, r2t->data_offset, scsi_out(task->sc)->length); - __kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, + kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); return ISCSI_ERR_DATALEN; } @@ -580,7 +580,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) r2t->sent = 0; tcp_task->exp_datasn = r2tsn + 1; - __kfifo_put(&tcp_task->r2tqueue, (void*)&r2t, sizeof(void*)); + kfifo_put(&tcp_task->r2tqueue, (void*)&r2t, sizeof(void*)); conn->r2t_pdus_cnt++; iscsi_requeue_task(task); @@ -951,7 +951,7 @@ int iscsi_tcp_task_init(struct iscsi_task *task) return conn->session->tt->init_pdu(task, 0, task->data_count); } - BUG_ON(__kfifo_len(&tcp_task->r2tqueue)); + BUG_ON(kfifo_len(&tcp_task->r2tqueue)); tcp_task->exp_datasn = 0; /* Prepare PDU, optionally w/ immediate data */ @@ -982,7 +982,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) if (r2t->data_length <= r2t->sent) { ISCSI_DBG_TCP(task->conn, " done with r2t %p\n", r2t); - __kfifo_put(&tcp_task->r2tpool.queue, + kfifo_put(&tcp_task->r2tpool.queue, (void *)&tcp_task->r2t, sizeof(void *)); tcp_task->r2t = r2t = NULL; @@ -990,7 +990,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) } if (r2t == NULL) { - __kfifo_get(&tcp_task->r2tqueue, + kfifo_get(&tcp_task->r2tqueue, (void *)&tcp_task->r2t, sizeof(void *)); r2t = tcp_task->r2t; } diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c index db1b41c55fd3..975e448cfcb9 100644 --- a/drivers/scsi/libsrp.c +++ b/drivers/scsi/libsrp.c @@ -61,7 +61,7 @@ static int srp_iu_pool_alloc(struct srp_queue *q, size_t max, kfifo_init(&q->queue, (void *) q->pool, max * sizeof(void *)); for (i = 0, iue = q->items; i < max; i++) { - __kfifo_put(&q->queue, (void *) &iue, sizeof(void *)); + kfifo_put(&q->queue, (void *) &iue, sizeof(void *)); iue->sbuf = ring[i]; iue++; } diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h index a76da201183b..96aa787f208f 100644 --- a/drivers/usb/host/fhci.h +++ b/drivers/usb/host/fhci.h @@ -505,19 +505,19 @@ static inline void cq_delete(struct kfifo *kfifo) static inline unsigned int cq_howmany(struct kfifo *kfifo) { - return __kfifo_len(kfifo) / sizeof(void *); + return kfifo_len(kfifo) / sizeof(void *); } static inline int cq_put(struct kfifo *kfifo, void *p) { - return __kfifo_put(kfifo, (void *)&p, sizeof(p)); + return kfifo_put(kfifo, (void *)&p, sizeof(p)); } static inline void *cq_get(struct kfifo *kfifo) { void *p = NULL; - __kfifo_get(kfifo, (void *)&p, sizeof(p)); + kfifo_get(kfifo, (void *)&p, sizeof(p)); return p; } diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 61eef18218be..d0a2e464cacd 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -276,7 +276,7 @@ static int usb_serial_generic_write_start(struct usb_serial_port *port) if (port->write_urb_busy) start_io = false; else { - start_io = (__kfifo_len(port->write_fifo) != 0); + start_io = (kfifo_len(port->write_fifo) != 0); port->write_urb_busy = start_io; } spin_unlock_irqrestore(&port->lock, flags); @@ -370,7 +370,7 @@ int usb_serial_generic_write_room(struct tty_struct *tty) (serial->type->max_in_flight_urbs - port->urbs_in_flight); } else if (serial->num_bulk_out) - room = port->write_fifo->size - __kfifo_len(port->write_fifo); + room = port->write_fifo->size - kfifo_len(port->write_fifo); spin_unlock_irqrestore(&port->lock, flags); dbg("%s - returns %d", __func__, room); diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index e0f5c9d4197d..a893acda3964 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -37,34 +37,25 @@ extern void kfifo_init(struct kfifo *fifo, unsigned char *buffer, extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size, gfp_t gfp_mask); extern void kfifo_free(struct kfifo *fifo); -extern unsigned int __kfifo_put(struct kfifo *fifo, +extern unsigned int kfifo_put(struct kfifo *fifo, const unsigned char *buffer, unsigned int len); -extern unsigned int __kfifo_get(struct kfifo *fifo, +extern unsigned int kfifo_get(struct kfifo *fifo, unsigned char *buffer, unsigned int len); -/** - * __kfifo_reset - removes the entire FIFO contents, no locking version - * @fifo: the fifo to be emptied. - */ -static inline void __kfifo_reset(struct kfifo *fifo) -{ - fifo->in = fifo->out = 0; -} - /** * kfifo_reset - removes the entire FIFO contents * @fifo: the fifo to be emptied. */ static inline void kfifo_reset(struct kfifo *fifo) { - __kfifo_reset(fifo); + fifo->in = fifo->out = 0; } /** - * __kfifo_len - returns the number of bytes available in the FIFO + * kfifo_len - returns the number of used bytes in the FIFO * @fifo: the fifo to be used. */ -static inline unsigned int __kfifo_len(struct kfifo *fifo) +static inline unsigned int kfifo_len(struct kfifo *fifo) { register unsigned int out; @@ -92,7 +83,7 @@ static inline __must_check unsigned int kfifo_put_locked(struct kfifo *fifo, spin_lock_irqsave(lock, flags); - ret = __kfifo_put(fifo, from, n); + ret = kfifo_put(fifo, from, n); spin_unlock_irqrestore(lock, flags); @@ -117,7 +108,7 @@ static inline __must_check unsigned int kfifo_get_locked(struct kfifo *fifo, spin_lock_irqsave(lock, flags); - ret = __kfifo_get(fifo, to, n); + ret = kfifo_get(fifo, to, n); /* * optimization: if the FIFO is empty, set the indices to 0 @@ -131,13 +122,4 @@ static inline __must_check unsigned int kfifo_get_locked(struct kfifo *fifo, return ret; } -/** - * kfifo_len - returns the number of bytes available in the FIFO - * @fifo: the fifo to be used. - */ -static inline unsigned int kfifo_len(struct kfifo *fifo) -{ - return __kfifo_len(fifo); -} - #endif diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 4950bdbe3477..963ffde4af1a 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -100,7 +100,7 @@ void kfifo_free(struct kfifo *fifo) EXPORT_SYMBOL(kfifo_free); /** - * __kfifo_put - puts some data into the FIFO, no locking version + * kfifo_put - puts some data into the FIFO, no locking version * @fifo: the fifo to be used. * @buffer: the data to be added. * @len: the length of the data to be added. @@ -112,7 +112,7 @@ EXPORT_SYMBOL(kfifo_free); * Note that with only one concurrent reader and one concurrent * writer, you don't need extra locking to use these functions. */ -unsigned int __kfifo_put(struct kfifo *fifo, +unsigned int kfifo_put(struct kfifo *fifo, const unsigned char *buffer, unsigned int len) { unsigned int l; @@ -144,10 +144,10 @@ unsigned int __kfifo_put(struct kfifo *fifo, return len; } -EXPORT_SYMBOL(__kfifo_put); +EXPORT_SYMBOL(kfifo_put); /** - * __kfifo_get - gets some data from the FIFO, no locking version + * kfifo_get - gets some data from the FIFO, no locking version * @fifo: the fifo to be used. * @buffer: where the data must be copied. * @len: the size of the destination buffer. @@ -158,7 +158,7 @@ EXPORT_SYMBOL(__kfifo_put); * Note that with only one concurrent reader and one concurrent * writer, you don't need extra locking to use these functions. */ -unsigned int __kfifo_get(struct kfifo *fifo, +unsigned int kfifo_get(struct kfifo *fifo, unsigned char *buffer, unsigned int len) { unsigned int l; @@ -190,4 +190,4 @@ unsigned int __kfifo_get(struct kfifo *fifo, return len; } -EXPORT_SYMBOL(__kfifo_get); +EXPORT_SYMBOL(kfifo_get); diff --git a/net/dccp/probe.c b/net/dccp/probe.c index c6b50351aa78..9ef36849edd7 100644 --- a/net/dccp/probe.c +++ b/net/dccp/probe.c @@ -131,7 +131,7 @@ static ssize_t dccpprobe_read(struct file *file, char __user *buf, return -ENOMEM; error = wait_event_interruptible(dccpw.wait, - __kfifo_len(&dccpw.fifo) != 0); + kfifo_len(&dccpw.fifo) != 0); if (error) goto out_free; -- GitLab From 7acd72eb85f1c7a15e8b5eb554994949241737f1 Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Mon, 21 Dec 2009 14:37:28 -0800 Subject: [PATCH 512/618] kfifo: rename kfifo_put... into kfifo_in... and kfifo_get... into kfifo_out... rename kfifo_put... into kfifo_in... to prevent miss use of old non in kernel-tree drivers ditto for kfifo_get... -> kfifo_out... Improve the prototypes of kfifo_in and kfifo_out to make the kerneldoc annotations more readable. Add mini "howto porting to the new API" in kfifo.h Signed-off-by: Stefani Seibold Acked-by: Greg Kroah-Hartman Acked-by: Mauro Carvalho Chehab Acked-by: Andi Kleen Acked-by: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/nozomi.c | 4 +-- drivers/char/sonypi.c | 8 ++--- drivers/infiniband/hw/cxgb3/cxio_resource.c | 16 ++++----- drivers/media/video/meye.c | 16 ++++----- drivers/net/wireless/libertas/main.c | 5 +-- drivers/platform/x86/fujitsu-laptop.c | 4 +-- drivers/platform/x86/sony-laptop.c | 8 ++--- drivers/scsi/libiscsi.c | 14 ++++---- drivers/scsi/libiscsi_tcp.c | 18 +++++----- drivers/scsi/libsrp.c | 6 ++-- drivers/usb/host/fhci.h | 4 +-- drivers/usb/serial/generic.c | 4 +-- include/linux/kfifo.h | 39 +++++++++++++++------ kernel/kfifo.c | 32 ++++++++--------- net/dccp/probe.c | 4 +-- 15 files changed, 101 insertions(+), 81 deletions(-) diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 61f5bfe74f38..9ef243429014 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -798,7 +798,7 @@ static int send_data(enum port_type index, struct nozomi *dc) struct tty_struct *tty = tty_port_tty_get(&port->port); /* Get data from tty and place in buf for now */ - size = kfifo_get(&port->fifo_ul, dc->send_buf, + size = kfifo_out(&port->fifo_ul, dc->send_buf, ul_size < SEND_BUF_MAX ? ul_size : SEND_BUF_MAX); if (size == 0) { @@ -1672,7 +1672,7 @@ static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, goto exit; } - rval = kfifo_put(&port->fifo_ul, (unsigned char *)buffer, count); + rval = kfifo_in(&port->fifo_ul, (unsigned char *)buffer, count); /* notify card */ if (unlikely(dc == NULL)) { diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index dbcb3bd192c7..0798754a607c 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -777,7 +777,7 @@ static void input_keyrelease(struct work_struct *work) { struct sonypi_keypress kp; - while (kfifo_get_locked(&sonypi_device.input_fifo, (unsigned char *)&kp, + while (kfifo_out_locked(&sonypi_device.input_fifo, (unsigned char *)&kp, sizeof(kp), &sonypi_device.input_fifo_lock) == sizeof(kp)) { msleep(10); @@ -828,7 +828,7 @@ static void sonypi_report_input_event(u8 event) if (kp.dev) { input_report_key(kp.dev, kp.key, 1); input_sync(kp.dev); - kfifo_put_locked(&sonypi_device.input_fifo, + kfifo_in_locked(&sonypi_device.input_fifo, (unsigned char *)&kp, sizeof(kp), &sonypi_device.input_fifo_lock); schedule_work(&sonypi_device.input_work); @@ -882,7 +882,7 @@ static irqreturn_t sonypi_irq(int irq, void *dev_id) acpi_bus_generate_proc_event(sonypi_acpi_device, 1, event); #endif - kfifo_put_locked(&sonypi_device.fifo, (unsigned char *)&event, + kfifo_in_locked(&sonypi_device.fifo, (unsigned char *)&event, sizeof(event), &sonypi_device.fifo_lock); kill_fasync(&sonypi_device.fifo_async, SIGIO, POLL_IN); wake_up_interruptible(&sonypi_device.fifo_proc_list); @@ -932,7 +932,7 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, return ret; while (ret < count && - (kfifo_get_locked(&sonypi_device.fifo, &c, sizeof(c), + (kfifo_out_locked(&sonypi_device.fifo, &c, sizeof(c), &sonypi_device.fifo_lock) == sizeof(c))) { if (put_user(c, buf++)) return -EFAULT; diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.c b/drivers/infiniband/hw/cxgb3/cxio_resource.c index d7d18fb02c93..dcbf2606c438 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_resource.c +++ b/drivers/infiniband/hw/cxgb3/cxio_resource.c @@ -59,7 +59,7 @@ static int __cxio_init_resource_fifo(struct kfifo *fifo, return -ENOMEM; for (i = 0; i < skip_low + skip_high; i++) - kfifo_put(fifo, (unsigned char *) &entry, sizeof(u32)); + kfifo_in(fifo, (unsigned char *) &entry, sizeof(u32)); if (random) { j = 0; random_bytes = random32(); @@ -71,22 +71,22 @@ static int __cxio_init_resource_fifo(struct kfifo *fifo, random_bytes = random32(); } idx = (random_bytes >> (j * 2)) & 0xF; - kfifo_put(fifo, + kfifo_in(fifo, (unsigned char *) &rarray[idx], sizeof(u32)); rarray[idx] = i; j++; } for (i = 0; i < RANDOM_SIZE; i++) - kfifo_put(fifo, + kfifo_in(fifo, (unsigned char *) &rarray[i], sizeof(u32)); } else for (i = skip_low; i < nr - skip_high; i++) - kfifo_put(fifo, (unsigned char *) &i, sizeof(u32)); + kfifo_in(fifo, (unsigned char *) &i, sizeof(u32)); for (i = 0; i < skip_low + skip_high; i++) - kfifo_get_locked(fifo, (unsigned char *) &entry, + kfifo_out_locked(fifo, (unsigned char *) &entry, sizeof(u32), fifo_lock); return 0; } @@ -119,7 +119,7 @@ static int cxio_init_qpid_fifo(struct cxio_rdev *rdev_p) for (i = 16; i < T3_MAX_NUM_QP; i++) if (!(i & rdev_p->qpmask)) - kfifo_put(&rdev_p->rscp->qpid_fifo, + kfifo_in(&rdev_p->rscp->qpid_fifo, (unsigned char *) &i, sizeof(u32)); return 0; } @@ -180,7 +180,7 @@ int cxio_hal_init_resource(struct cxio_rdev *rdev_p, static u32 cxio_hal_get_resource(struct kfifo *fifo, spinlock_t * lock) { u32 entry; - if (kfifo_get_locked(fifo, (unsigned char *) &entry, sizeof(u32), lock)) + if (kfifo_out_locked(fifo, (unsigned char *) &entry, sizeof(u32), lock)) return entry; else return 0; /* fifo emptry */ @@ -190,7 +190,7 @@ static void cxio_hal_put_resource(struct kfifo *fifo, spinlock_t * lock, u32 entry) { BUG_ON( - kfifo_put_locked(fifo, (unsigned char *) &entry, sizeof(u32), lock) + kfifo_in_locked(fifo, (unsigned char *) &entry, sizeof(u32), lock) == 0); } diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index 38bcedfd9fec..884a569d60a2 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -800,7 +800,7 @@ static irqreturn_t meye_irq(int irq, void *dev_id) return IRQ_HANDLED; if (meye.mchip_mode == MCHIP_HIC_MODE_CONT_OUT) { - if (kfifo_get_locked(&meye.grabq, (unsigned char *)&reqnr, + if (kfifo_out_locked(&meye.grabq, (unsigned char *)&reqnr, sizeof(int), &meye.grabq_lock) != sizeof(int)) { mchip_free_frame(); return IRQ_HANDLED; @@ -811,7 +811,7 @@ static irqreturn_t meye_irq(int irq, void *dev_id) meye.grab_buffer[reqnr].state = MEYE_BUF_DONE; do_gettimeofday(&meye.grab_buffer[reqnr].timestamp); meye.grab_buffer[reqnr].sequence = sequence++; - kfifo_put_locked(&meye.doneq, (unsigned char *)&reqnr, + kfifo_in_locked(&meye.doneq, (unsigned char *)&reqnr, sizeof(int), &meye.doneq_lock); wake_up_interruptible(&meye.proc_list); } else { @@ -821,7 +821,7 @@ static irqreturn_t meye_irq(int irq, void *dev_id) mchip_free_frame(); goto again; } - if (kfifo_get_locked(&meye.grabq, (unsigned char *)&reqnr, + if (kfifo_out_locked(&meye.grabq, (unsigned char *)&reqnr, sizeof(int), &meye.grabq_lock) != sizeof(int)) { mchip_free_frame(); goto again; @@ -832,7 +832,7 @@ static irqreturn_t meye_irq(int irq, void *dev_id) meye.grab_buffer[reqnr].state = MEYE_BUF_DONE; do_gettimeofday(&meye.grab_buffer[reqnr].timestamp); meye.grab_buffer[reqnr].sequence = sequence++; - kfifo_put_locked(&meye.doneq, (unsigned char *)&reqnr, + kfifo_in_locked(&meye.doneq, (unsigned char *)&reqnr, sizeof(int), &meye.doneq_lock); wake_up_interruptible(&meye.proc_list); } @@ -935,7 +935,7 @@ static int meyeioc_qbuf_capt(int *nb) mchip_cont_compression_start(); meye.grab_buffer[*nb].state = MEYE_BUF_USING; - kfifo_put_locked(&meye.grabq, (unsigned char *)nb, sizeof(int), + kfifo_in_locked(&meye.grabq, (unsigned char *)nb, sizeof(int), &meye.grabq_lock); mutex_unlock(&meye.lock); @@ -968,7 +968,7 @@ static int meyeioc_sync(struct file *file, void *fh, int *i) /* fall through */ case MEYE_BUF_DONE: meye.grab_buffer[*i].state = MEYE_BUF_UNUSED; - kfifo_get_locked(&meye.doneq, (unsigned char *)&unused, + kfifo_out_locked(&meye.doneq, (unsigned char *)&unused, sizeof(int), &meye.doneq_lock); } *i = meye.grab_buffer[*i].size; @@ -1456,7 +1456,7 @@ static int vidioc_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) buf->flags |= V4L2_BUF_FLAG_QUEUED; buf->flags &= ~V4L2_BUF_FLAG_DONE; meye.grab_buffer[buf->index].state = MEYE_BUF_USING; - kfifo_put_locked(&meye.grabq, (unsigned char *)&buf->index, + kfifo_in_locked(&meye.grabq, (unsigned char *)&buf->index, sizeof(int), &meye.grabq_lock); mutex_unlock(&meye.lock); @@ -1483,7 +1483,7 @@ static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) return -EINTR; } - if (!kfifo_get_locked(&meye.doneq, (unsigned char *)&reqnr, + if (!kfifo_out_locked(&meye.doneq, (unsigned char *)&reqnr, sizeof(int), &meye.doneq_lock)) { mutex_unlock(&meye.lock); return -EBUSY; diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 0622104f0a03..2bcfa745524a 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -513,7 +513,8 @@ static int lbs_thread(void *data) spin_lock_irq(&priv->driver_lock); while (kfifo_len(&priv->event_fifo)) { u32 event; - kfifo_get(&priv->event_fifo, (unsigned char *) &event, + + kfifo_out(&priv->event_fifo, (unsigned char *) &event, sizeof(event)); spin_unlock_irq(&priv->driver_lock); lbs_process_event(priv, event); @@ -1175,7 +1176,7 @@ void lbs_queue_event(struct lbs_private *priv, u32 event) if (priv->psstate == PS_STATE_SLEEP) priv->psstate = PS_STATE_AWAKE; - kfifo_put(&priv->event_fifo, (unsigned char *) &event, sizeof(u32)); + kfifo_in(&priv->event_fifo, (unsigned char *) &event, sizeof(u32)); wake_up_interruptible(&priv->waitq); diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 13dc7bedcfce..b66029bd75d0 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -1006,7 +1006,7 @@ static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event) vdbg_printk(FUJLAPTOP_DBG_TRACE, "Push keycode into ringbuffer [%d]\n", keycode); - status = kfifo_put_locked(&fujitsu_hotkey->fifo, + status = kfifo_in_locked(&fujitsu_hotkey->fifo, (unsigned char *)&keycode, sizeof(keycode), &fujitsu_hotkey->fifo_lock); @@ -1020,7 +1020,7 @@ static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event) } } else if (keycode == 0) { while ((status = - kfifo_get_locked( + kfifo_out_locked( &fujitsu_hotkey->fifo, (unsigned char *) &keycode_r, sizeof(keycode_r), diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 36e5dc6fc953..2896ca4cd9ab 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -300,7 +300,7 @@ static void do_sony_laptop_release_key(struct work_struct *work) { struct sony_laptop_keypress kp; - while (kfifo_get_locked(&sony_laptop_input.fifo, (unsigned char *)&kp, + while (kfifo_out_locked(&sony_laptop_input.fifo, (unsigned char *)&kp, sizeof(kp), &sony_laptop_input.fifo_lock) == sizeof(kp)) { msleep(10); @@ -363,7 +363,7 @@ static void sony_laptop_report_input_event(u8 event) /* we emit the scancode so we can always remap the key */ input_event(kp.dev, EV_MSC, MSC_SCAN, event); input_sync(kp.dev); - kfifo_put_locked(&sony_laptop_input.fifo, + kfifo_in_locked(&sony_laptop_input.fifo, (unsigned char *)&kp, sizeof(kp), &sony_laptop_input.fifo_lock); @@ -2130,7 +2130,7 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, return ret; while (ret < count && - (kfifo_get_locked(&sonypi_compat.fifo, &c, sizeof(c), + (kfifo_out_locked(&sonypi_compat.fifo, &c, sizeof(c), &sonypi_compat.fifo_lock) == sizeof(c))) { if (put_user(c, buf++)) return -EFAULT; @@ -2310,7 +2310,7 @@ static struct miscdevice sonypi_misc_device = { static void sonypi_compat_report_event(u8 event) { - kfifo_put_locked(&sonypi_compat.fifo, (unsigned char *)&event, + kfifo_in_locked(&sonypi_compat.fifo, (unsigned char *)&event, sizeof(event), &sonypi_compat.fifo_lock); kill_fasync(&sonypi_compat.fifo_async, SIGIO, POLL_IN); wake_up_interruptible(&sonypi_compat.fifo_proc_list); diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 5f0c46f43ee1..c28a712fd4db 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -517,7 +517,7 @@ static void iscsi_free_task(struct iscsi_task *task) if (conn->login_task == task) return; - kfifo_put(&session->cmdpool.queue, (void*)&task, sizeof(void*)); + kfifo_in(&session->cmdpool.queue, (void*)&task, sizeof(void*)); if (sc) { task->sc = NULL; @@ -737,7 +737,7 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE); BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED); - if (!kfifo_get(&session->cmdpool.queue, + if (!kfifo_out(&session->cmdpool.queue, (void*)&task, sizeof(void*))) return NULL; } @@ -1567,7 +1567,7 @@ static inline struct iscsi_task *iscsi_alloc_task(struct iscsi_conn *conn, { struct iscsi_task *task; - if (!kfifo_get(&conn->session->cmdpool.queue, + if (!kfifo_out(&conn->session->cmdpool.queue, (void *) &task, sizeof(void *))) return NULL; @@ -2469,7 +2469,7 @@ iscsi_pool_init(struct iscsi_pool *q, int max, void ***items, int item_size) q->max = i; goto enomem; } - kfifo_put(&q->queue, (void*)&q->pool[i], sizeof(void*)); + kfifo_in(&q->queue, (void*)&q->pool[i], sizeof(void*)); } if (items) { @@ -2819,7 +2819,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, int dd_size, /* allocate login_task used for the login/text sequences */ spin_lock_bh(&session->lock); - if (!kfifo_get(&session->cmdpool.queue, + if (!kfifo_out(&session->cmdpool.queue, (void*)&conn->login_task, sizeof(void*))) { spin_unlock_bh(&session->lock); @@ -2839,7 +2839,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, int dd_size, return cls_conn; login_task_data_alloc_fail: - kfifo_put(&session->cmdpool.queue, (void*)&conn->login_task, + kfifo_in(&session->cmdpool.queue, (void*)&conn->login_task, sizeof(void*)); login_task_alloc_fail: iscsi_destroy_conn(cls_conn); @@ -2902,7 +2902,7 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) free_pages((unsigned long) conn->data, get_order(ISCSI_DEF_MAX_RECV_SEG_LEN)); kfree(conn->persistent_address); - kfifo_put(&session->cmdpool.queue, (void*)&conn->login_task, + kfifo_in(&session->cmdpool.queue, (void*)&conn->login_task, sizeof(void*)); if (session->leadconn == conn) session->leadconn = NULL; diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index c0be926637b1..d51ffeca2ec9 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -445,15 +445,15 @@ void iscsi_tcp_cleanup_task(struct iscsi_task *task) return; /* flush task's r2t queues */ - while (kfifo_get(&tcp_task->r2tqueue, (void*)&r2t, sizeof(void*))) { - kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, + while (kfifo_out(&tcp_task->r2tqueue, (void*)&r2t, sizeof(void*))) { + kfifo_in(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); ISCSI_DBG_TCP(task->conn, "pending r2t dropped\n"); } r2t = tcp_task->r2t; if (r2t != NULL) { - kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, + kfifo_in(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); tcp_task->r2t = NULL; } @@ -541,7 +541,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) return 0; } - rc = kfifo_get(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); + rc = kfifo_out(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); if (!rc) { iscsi_conn_printk(KERN_ERR, conn, "Could not allocate R2T. " "Target has sent more R2Ts than it " @@ -554,7 +554,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) if (r2t->data_length == 0) { iscsi_conn_printk(KERN_ERR, conn, "invalid R2T with zero data len\n"); - kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, + kfifo_in(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); return ISCSI_ERR_DATALEN; } @@ -570,7 +570,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) "invalid R2T with data len %u at offset %u " "and total length %d\n", r2t->data_length, r2t->data_offset, scsi_out(task->sc)->length); - kfifo_put(&tcp_task->r2tpool.queue, (void*)&r2t, + kfifo_in(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); return ISCSI_ERR_DATALEN; } @@ -580,7 +580,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) r2t->sent = 0; tcp_task->exp_datasn = r2tsn + 1; - kfifo_put(&tcp_task->r2tqueue, (void*)&r2t, sizeof(void*)); + kfifo_in(&tcp_task->r2tqueue, (void*)&r2t, sizeof(void*)); conn->r2t_pdus_cnt++; iscsi_requeue_task(task); @@ -982,7 +982,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) if (r2t->data_length <= r2t->sent) { ISCSI_DBG_TCP(task->conn, " done with r2t %p\n", r2t); - kfifo_put(&tcp_task->r2tpool.queue, + kfifo_in(&tcp_task->r2tpool.queue, (void *)&tcp_task->r2t, sizeof(void *)); tcp_task->r2t = r2t = NULL; @@ -990,7 +990,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) } if (r2t == NULL) { - kfifo_get(&tcp_task->r2tqueue, + kfifo_out(&tcp_task->r2tqueue, (void *)&tcp_task->r2t, sizeof(void *)); r2t = tcp_task->r2t; } diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c index 975e448cfcb9..8424b8606efb 100644 --- a/drivers/scsi/libsrp.c +++ b/drivers/scsi/libsrp.c @@ -61,7 +61,7 @@ static int srp_iu_pool_alloc(struct srp_queue *q, size_t max, kfifo_init(&q->queue, (void *) q->pool, max * sizeof(void *)); for (i = 0, iue = q->items; i < max; i++) { - kfifo_put(&q->queue, (void *) &iue, sizeof(void *)); + kfifo_in(&q->queue, (void *) &iue, sizeof(void *)); iue->sbuf = ring[i]; iue++; } @@ -163,7 +163,7 @@ struct iu_entry *srp_iu_get(struct srp_target *target) { struct iu_entry *iue = NULL; - kfifo_get_locked(&target->iu_queue.queue, (void *) &iue, + kfifo_out_locked(&target->iu_queue.queue, (void *) &iue, sizeof(void *), &target->iu_queue.lock); if (!iue) return iue; @@ -176,7 +176,7 @@ EXPORT_SYMBOL_GPL(srp_iu_get); void srp_iu_put(struct iu_entry *iue) { - kfifo_put_locked(&iue->target->iu_queue.queue, (void *) &iue, + kfifo_in_locked(&iue->target->iu_queue.queue, (void *) &iue, sizeof(void *), &iue->target->iu_queue.lock); } EXPORT_SYMBOL_GPL(srp_iu_put); diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h index 96aa787f208f..72dae1c5ab38 100644 --- a/drivers/usb/host/fhci.h +++ b/drivers/usb/host/fhci.h @@ -510,14 +510,14 @@ static inline unsigned int cq_howmany(struct kfifo *kfifo) static inline int cq_put(struct kfifo *kfifo, void *p) { - return kfifo_put(kfifo, (void *)&p, sizeof(p)); + return kfifo_in(kfifo, (void *)&p, sizeof(p)); } static inline void *cq_get(struct kfifo *kfifo) { void *p = NULL; - kfifo_get(kfifo, (void *)&p, sizeof(p)); + kfifo_out(kfifo, (void *)&p, sizeof(p)); return p; } diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index d0a2e464cacd..b0f1183755c9 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -285,7 +285,7 @@ static int usb_serial_generic_write_start(struct usb_serial_port *port) return 0; data = port->write_urb->transfer_buffer; - count = kfifo_get_locked(port->write_fifo, data, port->bulk_out_size, &port->lock); + count = kfifo_out_locked(port->write_fifo, data, port->bulk_out_size, &port->lock); usb_serial_debug_data(debug, &port->dev, __func__, count, data); /* set up our urb */ @@ -345,7 +345,7 @@ int usb_serial_generic_write(struct tty_struct *tty, return usb_serial_multi_urb_write(tty, port, buf, count); - count = kfifo_put_locked(port->write_fifo, buf, count, &port->lock); + count = kfifo_in_locked(port->write_fifo, buf, count, &port->lock); result = usb_serial_generic_write_start(port); if (result >= 0) diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index a893acda3964..1b59c4a0e85f 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -19,6 +19,25 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ + +/* + * Howto porting drivers to the new generic fifo API: + * + * - Modify the declaration of the "struct kfifo *" object into a + * in-place "struct kfifo" object + * - Init the in-place object with kfifo_alloc() or kfifo_init() + * Note: The address of the in-place "struct kfifo" object must be + * passed as the first argument to this functions + * - Replace the use of __kfifo_put into kfifo_in and __kfifo_get + * into kfifo_out + * - Replace the use of kfifo_put into kfifo_in_locked and kfifo_get + * into kfifo_out_locked + * Note: the spinlock pointer formerly passed to kfifo_init/kfifo_alloc + * must be passed now to the kfifo_in_locked and kfifo_out_locked + * as the last parameter. + * - All formerly name __kfifo_* functions has been renamed into kfifo_* + */ + #ifndef _LINUX_KFIFO_H #define _LINUX_KFIFO_H @@ -37,10 +56,10 @@ extern void kfifo_init(struct kfifo *fifo, unsigned char *buffer, extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size, gfp_t gfp_mask); extern void kfifo_free(struct kfifo *fifo); -extern unsigned int kfifo_put(struct kfifo *fifo, - const unsigned char *buffer, unsigned int len); -extern unsigned int kfifo_get(struct kfifo *fifo, - unsigned char *buffer, unsigned int len); +extern __must_check unsigned int kfifo_in(struct kfifo *fifo, + const unsigned char *from, unsigned int len); +extern __must_check unsigned int kfifo_out(struct kfifo *fifo, + unsigned char *to, unsigned int len); /** * kfifo_reset - removes the entire FIFO contents @@ -65,7 +84,7 @@ static inline unsigned int kfifo_len(struct kfifo *fifo) } /** - * kfifo_put_locked - puts some data into the FIFO using a spinlock for locking + * kfifo_in_locked - puts some data into the FIFO using a spinlock for locking * @fifo: the fifo to be used. * @from: the data to be added. * @n: the length of the data to be added. @@ -75,7 +94,7 @@ static inline unsigned int kfifo_len(struct kfifo *fifo) * the FIFO depending on the free space, and returns the number of * bytes copied. */ -static inline __must_check unsigned int kfifo_put_locked(struct kfifo *fifo, +static inline __must_check unsigned int kfifo_in_locked(struct kfifo *fifo, const unsigned char *from, unsigned int n, spinlock_t *lock) { unsigned long flags; @@ -83,7 +102,7 @@ static inline __must_check unsigned int kfifo_put_locked(struct kfifo *fifo, spin_lock_irqsave(lock, flags); - ret = kfifo_put(fifo, from, n); + ret = kfifo_in(fifo, from, n); spin_unlock_irqrestore(lock, flags); @@ -91,7 +110,7 @@ static inline __must_check unsigned int kfifo_put_locked(struct kfifo *fifo, } /** - * kfifo_get_locked - gets some data from the FIFO using a spinlock for locking + * kfifo_out_locked - gets some data from the FIFO using a spinlock for locking * @fifo: the fifo to be used. * @to: where the data must be copied. * @n: the size of the destination buffer. @@ -100,7 +119,7 @@ static inline __must_check unsigned int kfifo_put_locked(struct kfifo *fifo, * This function copies at most @len bytes from the FIFO into the * @to buffer and returns the number of copied bytes. */ -static inline __must_check unsigned int kfifo_get_locked(struct kfifo *fifo, +static inline __must_check unsigned int kfifo_out_locked(struct kfifo *fifo, unsigned char *to, unsigned int n, spinlock_t *lock) { unsigned long flags; @@ -108,7 +127,7 @@ static inline __must_check unsigned int kfifo_get_locked(struct kfifo *fifo, spin_lock_irqsave(lock, flags); - ret = kfifo_get(fifo, to, n); + ret = kfifo_out(fifo, to, n); /* * optimization: if the FIFO is empty, set the indices to 0 diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 963ffde4af1a..d659442e73f2 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -100,20 +100,20 @@ void kfifo_free(struct kfifo *fifo) EXPORT_SYMBOL(kfifo_free); /** - * kfifo_put - puts some data into the FIFO, no locking version + * kfifo_in - puts some data into the FIFO * @fifo: the fifo to be used. - * @buffer: the data to be added. + * @from: the data to be added. * @len: the length of the data to be added. * - * This function copies at most @len bytes from the @buffer into + * This function copies at most @len bytes from the @from buffer into * the FIFO depending on the free space, and returns the number of * bytes copied. * * Note that with only one concurrent reader and one concurrent * writer, you don't need extra locking to use these functions. */ -unsigned int kfifo_put(struct kfifo *fifo, - const unsigned char *buffer, unsigned int len) +unsigned int kfifo_in(struct kfifo *fifo, + const unsigned char *from, unsigned int len) { unsigned int l; @@ -128,10 +128,10 @@ unsigned int kfifo_put(struct kfifo *fifo, /* first put the data starting from fifo->in to buffer end */ l = min(len, fifo->size - (fifo->in & (fifo->size - 1))); - memcpy(fifo->buffer + (fifo->in & (fifo->size - 1)), buffer, l); + memcpy(fifo->buffer + (fifo->in & (fifo->size - 1)), from, l); /* then put the rest (if any) at the beginning of the buffer */ - memcpy(fifo->buffer, buffer + l, len - l); + memcpy(fifo->buffer, from + l, len - l); /* * Ensure that we add the bytes to the kfifo -before- @@ -144,22 +144,22 @@ unsigned int kfifo_put(struct kfifo *fifo, return len; } -EXPORT_SYMBOL(kfifo_put); +EXPORT_SYMBOL(kfifo_in); /** - * kfifo_get - gets some data from the FIFO, no locking version + * kfifo_out - gets some data from the FIFO * @fifo: the fifo to be used. - * @buffer: where the data must be copied. + * @to: where the data must be copied. * @len: the size of the destination buffer. * * This function copies at most @len bytes from the FIFO into the - * @buffer and returns the number of copied bytes. + * @to buffer and returns the number of copied bytes. * * Note that with only one concurrent reader and one concurrent * writer, you don't need extra locking to use these functions. */ -unsigned int kfifo_get(struct kfifo *fifo, - unsigned char *buffer, unsigned int len) +unsigned int kfifo_out(struct kfifo *fifo, + unsigned char *to, unsigned int len) { unsigned int l; @@ -174,10 +174,10 @@ unsigned int kfifo_get(struct kfifo *fifo, /* first get the data from fifo->out until the end of the buffer */ l = min(len, fifo->size - (fifo->out & (fifo->size - 1))); - memcpy(buffer, fifo->buffer + (fifo->out & (fifo->size - 1)), l); + memcpy(to, fifo->buffer + (fifo->out & (fifo->size - 1)), l); /* then get the rest (if any) from the beginning of the buffer */ - memcpy(buffer + l, fifo->buffer, len - l); + memcpy(to + l, fifo->buffer, len - l); /* * Ensure that we remove the bytes from the kfifo -before- @@ -190,4 +190,4 @@ unsigned int kfifo_get(struct kfifo *fifo, return len; } -EXPORT_SYMBOL(kfifo_get); +EXPORT_SYMBOL(kfifo_out); diff --git a/net/dccp/probe.c b/net/dccp/probe.c index 9ef36849edd7..a1362dc8abb0 100644 --- a/net/dccp/probe.c +++ b/net/dccp/probe.c @@ -67,7 +67,7 @@ static void printl(const char *fmt, ...) len += vscnprintf(tbuf+len, sizeof(tbuf)-len, fmt, args); va_end(args); - kfifo_put_locked(&dccpw.fifo, tbuf, len, &dccpw.lock); + kfifo_in_locked(&dccpw.fifo, tbuf, len, &dccpw.lock); wake_up(&dccpw.wait); } @@ -135,7 +135,7 @@ static ssize_t dccpprobe_read(struct file *file, char __user *buf, if (error) goto out_free; - cnt = kfifo_get_locked(&dccpw.fifo, tbuf, len, &dccpw.lock); + cnt = kfifo_out_locked(&dccpw.fifo, tbuf, len, &dccpw.lock); error = copy_to_user(buf, tbuf, cnt) ? -EFAULT : 0; out_free: -- GitLab From 9842c38e917636fa7dc6b88aff17a8f1fd7f0cc0 Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Mon, 21 Dec 2009 14:37:29 -0800 Subject: [PATCH 513/618] kfifo: fix warn_unused_result Fix the "ignoring return value of '...', declared with attribute warn_unused_result" compiler warning in several users of the new kfifo API. It removes the __must_check attribute from kfifo_in() and kfifo_in_locked() which must not necessary performed. Fix the allocation bug in the nozomi driver file, by moving out the kfifo_alloc from the interrupt handler into the probe function. Fix the kfifo_out() and kfifo_out_locked() users to handle a unexpected end of fifo. Signed-off-by: Stefani Seibold Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/nozomi.c | 31 ++++++++++++++++++--- drivers/infiniband/hw/cxgb3/cxio_resource.c | 5 ++-- drivers/media/video/meye.c | 5 ++-- drivers/net/wireless/libertas/main.c | 6 ++-- drivers/scsi/libiscsi_tcp.c | 9 ++++-- drivers/scsi/libsrp.c | 7 +++-- include/linux/kfifo.h | 4 +-- 7 files changed, 51 insertions(+), 16 deletions(-) diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 9ef243429014..7d73cd430340 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -685,8 +685,6 @@ static int nozomi_read_config_table(struct nozomi *dc) dump_table(dc); for (i = PORT_MDM; i < MAX_PORT; i++) { - kfifo_alloc(&dc->port[i].fifo_ul, - FIFO_BUFFER_SIZE_UL, GFP_ATOMIC); memset(&dc->port[i].ctrl_dl, 0, sizeof(struct ctrl_dl)); memset(&dc->port[i].ctrl_ul, 0, sizeof(struct ctrl_ul)); } @@ -1433,6 +1431,16 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, goto err_free_sbuf; } + for (i = PORT_MDM; i < MAX_PORT; i++) { + if (kfifo_alloc(&dc->port[i].fifo_ul, + FIFO_BUFFER_SIZE_UL, GFP_ATOMIC)) { + dev_err(&pdev->dev, + "Could not allocate kfifo buffer\n"); + ret = -ENOMEM; + goto err_free_kfifo; + } + } + spin_lock_init(&dc->spin_mutex); nozomi_setup_private_data(dc); @@ -1445,7 +1453,7 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, NOZOMI_NAME, dc); if (unlikely(ret)) { dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq); - goto err_free_sbuf; + goto err_free_kfifo; } DBG1("base_addr: %p", dc->base_addr); @@ -1464,13 +1472,28 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, dc->state = NOZOMI_STATE_ENABLED; for (i = 0; i < MAX_PORT; i++) { + struct device *tty_dev; + mutex_init(&dc->port[i].tty_sem); tty_port_init(&dc->port[i].port); - tty_register_device(ntty_driver, dc->index_start + i, + tty_dev = tty_register_device(ntty_driver, dc->index_start + i, &pdev->dev); + + if (IS_ERR(tty_dev)) { + ret = PTR_ERR(tty_dev); + dev_err(&pdev->dev, "Could not allocate tty?\n"); + goto err_free_tty; + } } + return 0; +err_free_tty: + for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) + tty_unregister_device(ntty_driver, i); +err_free_kfifo: + for (i = 0; i < MAX_PORT; i++) + kfifo_free(&dc->port[i].fifo_ul); err_free_sbuf: kfree(dc->send_buf); iounmap(dc->base_addr); diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.c b/drivers/infiniband/hw/cxgb3/cxio_resource.c index dcbf2606c438..31f9201b2980 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_resource.c +++ b/drivers/infiniband/hw/cxgb3/cxio_resource.c @@ -86,8 +86,9 @@ static int __cxio_init_resource_fifo(struct kfifo *fifo, kfifo_in(fifo, (unsigned char *) &i, sizeof(u32)); for (i = 0; i < skip_low + skip_high; i++) - kfifo_out_locked(fifo, (unsigned char *) &entry, - sizeof(u32), fifo_lock); + if (kfifo_out_locked(fifo, (unsigned char *) &entry, + sizeof(u32), fifo_lock) != sizeof(u32)) + break; return 0; } diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index 884a569d60a2..b421858ccf90 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -968,8 +968,9 @@ static int meyeioc_sync(struct file *file, void *fh, int *i) /* fall through */ case MEYE_BUF_DONE: meye.grab_buffer[*i].state = MEYE_BUF_UNUSED; - kfifo_out_locked(&meye.doneq, (unsigned char *)&unused, - sizeof(int), &meye.doneq_lock); + if (kfifo_out_locked(&meye.doneq, (unsigned char *)&unused, + sizeof(int), &meye.doneq_lock) != sizeof(int)) + break; } *i = meye.grab_buffer[*i].size; mutex_unlock(&meye.lock); diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 2bcfa745524a..c2975c8e2f21 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -514,8 +514,10 @@ static int lbs_thread(void *data) while (kfifo_len(&priv->event_fifo)) { u32 event; - kfifo_out(&priv->event_fifo, (unsigned char *) &event, - sizeof(event)); + if (kfifo_out(&priv->event_fifo, + (unsigned char *) &event, sizeof(event)) != + sizeof(event)) + break; spin_unlock_irq(&priv->driver_lock); lbs_process_event(priv, event); spin_lock_irq(&priv->driver_lock); diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index d51ffeca2ec9..db6856c138fc 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -990,8 +990,13 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) } if (r2t == NULL) { - kfifo_out(&tcp_task->r2tqueue, - (void *)&tcp_task->r2t, sizeof(void *)); + if (kfifo_out(&tcp_task->r2tqueue, + (void *)&tcp_task->r2t, sizeof(void *)) != + sizeof(void *)) { + WARN_ONCE(1, "unexpected fifo state"); + r2t = NULL; + } + r2t = tcp_task->r2t; } spin_unlock_bh(&session->lock); diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c index 8424b8606efb..ab19b3b4be52 100644 --- a/drivers/scsi/libsrp.c +++ b/drivers/scsi/libsrp.c @@ -163,8 +163,11 @@ struct iu_entry *srp_iu_get(struct srp_target *target) { struct iu_entry *iue = NULL; - kfifo_out_locked(&target->iu_queue.queue, (void *) &iue, - sizeof(void *), &target->iu_queue.lock); + if (kfifo_out_locked(&target->iu_queue.queue, (void *) &iue, + sizeof(void *), &target->iu_queue.lock) != sizeof(void *)) { + WARN_ONCE(1, "unexpected fifo state"); + return NULL; + } if (!iue) return iue; iue->target = target; diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 1b59c4a0e85f..5ed2565c89b6 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -56,7 +56,7 @@ extern void kfifo_init(struct kfifo *fifo, unsigned char *buffer, extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size, gfp_t gfp_mask); extern void kfifo_free(struct kfifo *fifo); -extern __must_check unsigned int kfifo_in(struct kfifo *fifo, +extern unsigned int kfifo_in(struct kfifo *fifo, const unsigned char *from, unsigned int len); extern __must_check unsigned int kfifo_out(struct kfifo *fifo, unsigned char *to, unsigned int len); @@ -94,7 +94,7 @@ static inline unsigned int kfifo_len(struct kfifo *fifo) * the FIFO depending on the free space, and returns the number of * bytes copied. */ -static inline __must_check unsigned int kfifo_in_locked(struct kfifo *fifo, +static inline unsigned int kfifo_in_locked(struct kfifo *fifo, const unsigned char *from, unsigned int n, spinlock_t *lock) { unsigned long flags; -- GitLab From 37bdfbbfaab47811fcec84dff23c4e8da1a09f9e Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Mon, 21 Dec 2009 14:37:30 -0800 Subject: [PATCH 514/618] kfifo: add DEFINE_KFIFO and friends, add very tiny functions Add DECLARE_KFIFO - macro to declare a kfifo and the associated buffer inside a struct Add INIT_KFIFO - Initialize a kfifo declared by DECLARED_KFIFO Add DEFINE_KFIFO - macro to define and initialize a kfifo as a global or local object Add kfifo_size() - returns the size of the fifo in bytes Add kfifo_is_empty() - returns true if the fifo is empty Add kfifo_is_full() - returns true if the fifo is full Add kfifo_avail() - returns the number of bytes available in the FIFO Do some code cleanup Signed-off-by: Stefani Seibold Acked-by: Greg Kroah-Hartman Acked-by: Mauro Carvalho Chehab Acked-by: Andi Kleen Acked-by: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kfifo.h | 94 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 92 insertions(+), 2 deletions(-) diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 5ed2565c89b6..dd53eed3e2af 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -51,6 +51,60 @@ struct kfifo { unsigned int out; /* data is extracted from off. (out % size) */ }; +/* + * Macros for declaration and initialization of the kfifo datatype + */ + +/* helper macro */ +#define __kfifo_initializer(s, b) \ + (struct kfifo) { \ + .size = s, \ + .in = 0, \ + .out = 0, \ + .buffer = b \ + } + +/** + * DECLARE_KFIFO - macro to declare a kfifo and the associated buffer + * @name: name of the declared kfifo datatype + * @size: size of the fifo buffer + * + * Note: the macro can be used inside struct or union declaration + * Note: the macro creates two objects: + * A kfifo object with the given name and a buffer for the kfifo + * object named name##kfifo_buffer + */ +#define DECLARE_KFIFO(name, size) \ +union { \ + struct kfifo name; \ + unsigned char name##kfifo_buffer[size + sizeof(struct kfifo)]; \ +} + +/** + * INIT_KFIFO - Initialize a kfifo declared by DECLARED_KFIFO + * @name: name of the declared kfifo datatype + * @size: size of the fifo buffer + */ +#define INIT_KFIFO(name) \ + name = __kfifo_initializer(sizeof(name##kfifo_buffer) - \ + sizeof(struct kfifo), name##kfifo_buffer) + +/** + * DEFINE_KFIFO - macro to define and initialize a kfifo + * @name: name of the declared kfifo datatype + * @size: size of the fifo buffer + * + * Note: the macro can be used for global and local kfifo data type variables + * Note: the macro creates two objects: + * A kfifo object with the given name and a buffer for the kfifo + * object named name##kfifo_buffer + */ +#define DEFINE_KFIFO(name, size) \ + unsigned char name##kfifo_buffer[size]; \ + struct kfifo name = __kfifo_initializer(size, name##kfifo_buffer) + +#undef __kfifo_initializer + extern void kfifo_init(struct kfifo *fifo, unsigned char *buffer, unsigned int size); extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size, @@ -70,6 +124,15 @@ static inline void kfifo_reset(struct kfifo *fifo) fifo->in = fifo->out = 0; } +/** + * kfifo_size - returns the size of the fifo in bytes + * @fifo: the fifo to be used. + */ +static inline __must_check unsigned int kfifo_size(struct kfifo *fifo) +{ + return fifo->size; +} + /** * kfifo_len - returns the number of used bytes in the FIFO * @fifo: the fifo to be used. @@ -83,6 +146,33 @@ static inline unsigned int kfifo_len(struct kfifo *fifo) return fifo->in - out; } +/** + * kfifo_is_empty - returns true if the fifo is empty + * @fifo: the fifo to be used. + */ +static inline __must_check int kfifo_is_empty(struct kfifo *fifo) +{ + return fifo->in == fifo->out; +} + +/** + * kfifo_is_full - returns true if the fifo is full + * @fifo: the fifo to be used. + */ +static inline __must_check int kfifo_is_full(struct kfifo *fifo) +{ + return kfifo_len(fifo) == kfifo_size(fifo); +} + +/** + * kfifo_avail - returns the number of bytes available in the FIFO + * @fifo: the fifo to be used. + */ +static inline __must_check unsigned int kfifo_avail(struct kfifo *fifo) +{ + return kfifo_size(fifo) - kfifo_len(fifo); +} + /** * kfifo_in_locked - puts some data into the FIFO using a spinlock for locking * @fifo: the fifo to be used. @@ -133,8 +223,8 @@ static inline __must_check unsigned int kfifo_out_locked(struct kfifo *fifo, * optimization: if the FIFO is empty, set the indices to 0 * so we don't wrap the next time */ - if (fifo->in == fifo->out) - fifo->in = fifo->out = 0; + if (kfifo_is_empty(fifo)) + kfifo_reset(fifo); spin_unlock_irqrestore(lock, flags); -- GitLab From a121f24accac1600bf5b6fb1e12eeabdfed7cb1a Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Mon, 21 Dec 2009 14:37:31 -0800 Subject: [PATCH 515/618] kfifo: add kfifo_skip, kfifo_from_user and kfifo_to_user Add kfifo_reset_out() for save lockless discard the fifo output Add kfifo_skip() to skip a number of output bytes Add kfifo_from_user() to copy user space data into the fifo Add kfifo_to_user() to copy fifo data to user space Signed-off-by: Stefani Seibold Acked-by: Greg Kroah-Hartman Acked-by: Mauro Carvalho Chehab Acked-by: Andi Kleen Acked-by: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kfifo.h | 47 ++++++++++++++ kernel/kfifo.c | 139 +++++++++++++++++++++++++++++++++++++----- 2 files changed, 170 insertions(+), 16 deletions(-) diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index dd53eed3e2af..d3230fb08bc7 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -124,6 +124,16 @@ static inline void kfifo_reset(struct kfifo *fifo) fifo->in = fifo->out = 0; } +/** + * kfifo_reset_out - skip FIFO contents + * @fifo: the fifo to be emptied. + */ +static inline void kfifo_reset_out(struct kfifo *fifo) +{ + smp_mb(); + fifo->out = fifo->in; +} + /** * kfifo_size - returns the size of the fifo in bytes * @fifo: the fifo to be used. @@ -231,4 +241,41 @@ static inline __must_check unsigned int kfifo_out_locked(struct kfifo *fifo, return ret; } +extern void kfifo_skip(struct kfifo *fifo, unsigned int len); + +extern __must_check unsigned int kfifo_from_user(struct kfifo *fifo, + const void __user *from, unsigned int n); + +extern __must_check unsigned int kfifo_to_user(struct kfifo *fifo, + void __user *to, unsigned int n); + +/** + * __kfifo_add_out internal helper function for updating the out offset + */ +static inline void __kfifo_add_out(struct kfifo *fifo, + unsigned int off) +{ + smp_mb(); + fifo->out += off; +} + +/** + * __kfifo_add_in internal helper function for updating the in offset + */ +static inline void __kfifo_add_in(struct kfifo *fifo, + unsigned int off) +{ + smp_wmb(); + fifo->in += off; +} + +/** + * __kfifo_off internal helper function for calculating the index of a + * given offeset + */ +static inline unsigned int __kfifo_off(struct kfifo *fifo, unsigned int off) +{ + return off & (fifo->size - 1); +} + #endif diff --git a/kernel/kfifo.c b/kernel/kfifo.c index d659442e73f2..2a78425ef67f 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -26,6 +26,7 @@ #include #include #include +#include static void _kfifo_init(struct kfifo *fifo, unsigned char *buffer, unsigned int size) @@ -99,6 +100,21 @@ void kfifo_free(struct kfifo *fifo) } EXPORT_SYMBOL(kfifo_free); +/** + * kfifo_skip - skip output data + * @fifo: the fifo to be used. + * @len: number of bytes to skip + */ +void kfifo_skip(struct kfifo *fifo, unsigned int len) +{ + if (len < kfifo_len(fifo)) { + __kfifo_add_out(fifo, len); + return; + } + kfifo_reset_out(fifo); +} +EXPORT_SYMBOL(kfifo_skip); + /** * kfifo_in - puts some data into the FIFO * @fifo: the fifo to be used. @@ -115,6 +131,7 @@ EXPORT_SYMBOL(kfifo_free); unsigned int kfifo_in(struct kfifo *fifo, const unsigned char *from, unsigned int len) { + unsigned int off; unsigned int l; len = min(len, fifo->size - fifo->in + fifo->out); @@ -126,21 +143,16 @@ unsigned int kfifo_in(struct kfifo *fifo, smp_mb(); + off = __kfifo_off(fifo, fifo->in); + /* first put the data starting from fifo->in to buffer end */ - l = min(len, fifo->size - (fifo->in & (fifo->size - 1))); - memcpy(fifo->buffer + (fifo->in & (fifo->size - 1)), from, l); + l = min(len, fifo->size - off); + memcpy(fifo->buffer + off, from, l); /* then put the rest (if any) at the beginning of the buffer */ memcpy(fifo->buffer, from + l, len - l); - /* - * Ensure that we add the bytes to the kfifo -before- - * we update the fifo->in index. - */ - - smp_wmb(); - - fifo->in += len; + __kfifo_add_in(fifo, len); return len; } @@ -161,6 +173,7 @@ EXPORT_SYMBOL(kfifo_in); unsigned int kfifo_out(struct kfifo *fifo, unsigned char *to, unsigned int len) { + unsigned int off; unsigned int l; len = min(len, fifo->in - fifo->out); @@ -172,22 +185,116 @@ unsigned int kfifo_out(struct kfifo *fifo, smp_rmb(); + off = __kfifo_off(fifo, fifo->out); + /* first get the data from fifo->out until the end of the buffer */ - l = min(len, fifo->size - (fifo->out & (fifo->size - 1))); - memcpy(to, fifo->buffer + (fifo->out & (fifo->size - 1)), l); + l = min(len, fifo->size - off); + memcpy(to, fifo->buffer + off, l); /* then get the rest (if any) from the beginning of the buffer */ memcpy(to + l, fifo->buffer, len - l); + __kfifo_add_out(fifo, len); + + return len; +} +EXPORT_SYMBOL(kfifo_out); + +/** + * kfifo_from_user - puts some data from user space into the FIFO + * @fifo: the fifo to be used. + * @from: pointer to the data to be added. + * @len: the length of the data to be added. + * + * This function copies at most @len bytes from the @from into the + * FIFO depending and returns the number of copied bytes. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these functions. + */ +unsigned int kfifo_from_user(struct kfifo *fifo, + const void __user *from, unsigned int len) +{ + unsigned int off; + unsigned int l; + int ret; + + len = min(len, fifo->size - fifo->in + fifo->out); + /* - * Ensure that we remove the bytes from the kfifo -before- - * we update the fifo->out index. + * Ensure that we sample the fifo->out index -before- we + * start putting bytes into the kfifo. */ smp_mb(); - fifo->out += len; + off = __kfifo_off(fifo, fifo->in); + + /* first put the data starting from fifo->in to buffer end */ + l = min(len, fifo->size - off); + ret = copy_from_user(fifo->buffer + off, from, l); + + if (unlikely(ret)) + return l - ret; + + /* then put the rest (if any) at the beginning of the buffer */ + ret = copy_from_user(fifo->buffer, from + l, len - l); + + if (unlikely(ret)) + return len - ret; + + __kfifo_add_in(fifo, len); return len; } -EXPORT_SYMBOL(kfifo_out); +EXPORT_SYMBOL(kfifo_from_user); + +/** + * kfifo_to_user - gets data from the FIFO and write it to user space + * @fifo: the fifo to be used. + * @to: where the data must be copied. + * @len: the size of the destination buffer. + * + * This function copies at most @len bytes from the FIFO into the + * @to buffer and returns the number of copied bytes. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these functions. + */ +unsigned int kfifo_to_user(struct kfifo *fifo, + void __user *to, unsigned int len) +{ + unsigned int off; + unsigned int l; + int ret; + + len = min(len, fifo->in - fifo->out); + + /* + * Ensure that we sample the fifo->in index -before- we + * start removing bytes from the kfifo. + */ + + smp_rmb(); + + off = __kfifo_off(fifo, fifo->out); + + /* first get the data from fifo->out until the end of the buffer */ + l = min(len, fifo->size - off); + ret = copy_to_user(to, fifo->buffer + off, l); + + if (unlikely(ret)) + return l - ret; + + /* then get the rest (if any) from the beginning of the buffer */ + ret = copy_to_user(to + l, fifo->buffer, len - l); + + if (unlikely(ret)) + return len - ret; + + __kfifo_add_out(fifo, len); + + return len; +} +EXPORT_SYMBOL(kfifo_to_user); + -- GitLab From 86d4880313603810901f639ccb5c88ff13d4ad3c Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Mon, 21 Dec 2009 14:37:32 -0800 Subject: [PATCH 516/618] kfifo: add record handling functions Add kfifo_in_rec() - puts some record data into the FIFO Add kfifo_out_rec() - gets some record data from the FIFO Add kfifo_from_user_rec() - puts some data from user space into the FIFO Add kfifo_to_user_rec() - gets data from the FIFO and write it to user space Add kfifo_peek_rec() - gets the size of the next FIFO record field Add kfifo_skip_rec() - skip the next fifo out record Add kfifo_avail_rec() - determinate the number of bytes available in a record FIFO Signed-off-by: Stefani Seibold Acked-by: Greg Kroah-Hartman Acked-by: Mauro Carvalho Chehab Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kfifo.h | 330 ++++++++++++++++++++++++++++++++++++++++++ kernel/kfifo.c | 286 ++++++++++++++++++++++++------------ 2 files changed, 523 insertions(+), 93 deletions(-) diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index d3230fb08bc7..486e8ad3bb50 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -278,4 +278,334 @@ static inline unsigned int __kfifo_off(struct kfifo *fifo, unsigned int off) return off & (fifo->size - 1); } +/** + * __kfifo_peek_n internal helper function for determinate the length of + * the next record in the fifo + */ +static inline unsigned int __kfifo_peek_n(struct kfifo *fifo, + unsigned int recsize) +{ +#define __KFIFO_GET(fifo, off, shift) \ + ((fifo)->buffer[__kfifo_off((fifo), (fifo)->out+(off))] << (shift)) + + unsigned int l; + + l = __KFIFO_GET(fifo, 0, 0); + + if (--recsize) + l |= __KFIFO_GET(fifo, 1, 8); + + return l; +#undef __KFIFO_GET +} + +/** + * __kfifo_poke_n internal helper function for storing the length of + * the next record into the fifo + */ +static inline void __kfifo_poke_n(struct kfifo *fifo, + unsigned int recsize, unsigned int n) +{ +#define __KFIFO_PUT(fifo, off, val, shift) \ + ( \ + (fifo)->buffer[__kfifo_off((fifo), (fifo)->in+(off))] = \ + (unsigned char)((val) >> (shift)) \ + ) + + __KFIFO_PUT(fifo, 0, n, 0); + + if (--recsize) + __KFIFO_PUT(fifo, 1, n, 8); +#undef __KFIFO_PUT +} + +/** + * __kfifo_in_... internal functions for put date into the fifo + * do not call it directly, use kfifo_in_rec() instead + */ +extern unsigned int __kfifo_in_n(struct kfifo *fifo, + const void *from, unsigned int n, unsigned int recsize); + +extern unsigned int __kfifo_in_generic(struct kfifo *fifo, + const void *from, unsigned int n, unsigned int recsize); + +static inline unsigned int __kfifo_in_rec(struct kfifo *fifo, + const void *from, unsigned int n, unsigned int recsize) +{ + unsigned int ret; + + ret = __kfifo_in_n(fifo, from, n, recsize); + + if (likely(ret == 0)) { + if (recsize) + __kfifo_poke_n(fifo, recsize, n); + __kfifo_add_in(fifo, n + recsize); + } + return ret; +} + +/** + * kfifo_in_rec - puts some record data into the FIFO + * @fifo: the fifo to be used. + * @from: the data to be added. + * @n: the length of the data to be added. + * @recsize: size of record field + * + * This function copies @n bytes from the @from into the FIFO and returns + * the number of bytes which cannot be copied. + * A returned value greater than the @n value means that the record doesn't + * fit into the buffer. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these functions. + */ +static inline __must_check unsigned int kfifo_in_rec(struct kfifo *fifo, + void *from, unsigned int n, unsigned int recsize) +{ + if (!__builtin_constant_p(recsize)) + return __kfifo_in_generic(fifo, from, n, recsize); + return __kfifo_in_rec(fifo, from, n, recsize); +} + +/** + * __kfifo_out_... internal functions for get date from the fifo + * do not call it directly, use kfifo_out_rec() instead + */ +extern unsigned int __kfifo_out_n(struct kfifo *fifo, + void *to, unsigned int reclen, unsigned int recsize); + +extern unsigned int __kfifo_out_generic(struct kfifo *fifo, + void *to, unsigned int n, + unsigned int recsize, unsigned int *total); + +static inline unsigned int __kfifo_out_rec(struct kfifo *fifo, + void *to, unsigned int n, unsigned int recsize, + unsigned int *total) +{ + unsigned int l; + + if (!recsize) { + l = n; + if (total) + *total = l; + } else { + l = __kfifo_peek_n(fifo, recsize); + if (total) + *total = l; + if (n < l) + return l; + } + + return __kfifo_out_n(fifo, to, l, recsize); +} + +/** + * kfifo_out_rec - gets some record data from the FIFO + * @fifo: the fifo to be used. + * @to: where the data must be copied. + * @n: the size of the destination buffer. + * @recsize: size of record field + * @total: pointer where the total number of to copied bytes should stored + * + * This function copies at most @n bytes from the FIFO to @to and returns the + * number of bytes which cannot be copied. + * A returned value greater than the @n value means that the record doesn't + * fit into the @to buffer. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these functions. + */ +static inline __must_check unsigned int kfifo_out_rec(struct kfifo *fifo, + void *to, unsigned int n, unsigned int recsize, + unsigned int *total) + +{ + if (!__builtin_constant_p(recsize)) + return __kfifo_out_generic(fifo, to, n, recsize, total); + return __kfifo_out_rec(fifo, to, n, recsize, total); +} + +/** + * __kfifo_from_user_... internal functions for transfer from user space into + * the fifo. do not call it directly, use kfifo_from_user_rec() instead + */ +extern unsigned int __kfifo_from_user_n(struct kfifo *fifo, + const void __user *from, unsigned int n, unsigned int recsize); + +extern unsigned int __kfifo_from_user_generic(struct kfifo *fifo, + const void __user *from, unsigned int n, unsigned int recsize); + +static inline unsigned int __kfifo_from_user_rec(struct kfifo *fifo, + const void __user *from, unsigned int n, unsigned int recsize) +{ + unsigned int ret; + + ret = __kfifo_from_user_n(fifo, from, n, recsize); + + if (likely(ret == 0)) { + if (recsize) + __kfifo_poke_n(fifo, recsize, n); + __kfifo_add_in(fifo, n + recsize); + } + return ret; +} + +/** + * kfifo_from_user_rec - puts some data from user space into the FIFO + * @fifo: the fifo to be used. + * @from: pointer to the data to be added. + * @n: the length of the data to be added. + * @recsize: size of record field + * + * This function copies @n bytes from the @from into the + * FIFO and returns the number of bytes which cannot be copied. + * + * If the returned value is equal or less the @n value, the copy_from_user() + * functions has failed. Otherwise the record doesn't fit into the buffer. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these functions. + */ +static inline __must_check unsigned int kfifo_from_user_rec(struct kfifo *fifo, + const void __user *from, unsigned int n, unsigned int recsize) +{ + if (!__builtin_constant_p(recsize)) + return __kfifo_from_user_generic(fifo, from, n, recsize); + return __kfifo_from_user_rec(fifo, from, n, recsize); +} + +/** + * __kfifo_to_user_... internal functions for transfer fifo data into user space + * do not call it directly, use kfifo_to_user_rec() instead + */ +extern unsigned int __kfifo_to_user_n(struct kfifo *fifo, + void __user *to, unsigned int n, unsigned int reclen, + unsigned int recsize); + +extern unsigned int __kfifo_to_user_generic(struct kfifo *fifo, + void __user *to, unsigned int n, unsigned int recsize, + unsigned int *total); + +static inline unsigned int __kfifo_to_user_rec(struct kfifo *fifo, + void __user *to, unsigned int n, + unsigned int recsize, unsigned int *total) +{ + unsigned int l; + + if (!recsize) { + l = n; + if (total) + *total = l; + } else { + l = __kfifo_peek_n(fifo, recsize); + if (total) + *total = l; + if (n < l) + return l; + } + + return __kfifo_to_user_n(fifo, to, n, l, recsize); +} + +/** + * kfifo_to_user_rec - gets data from the FIFO and write it to user space + * @fifo: the fifo to be used. + * @to: where the data must be copied. + * @n: the size of the destination buffer. + * @recsize: size of record field + * @total: pointer where the total number of to copied bytes should stored + * + * This function copies at most @n bytes from the FIFO to the @to. + * In case of an error, the function returns the number of bytes which cannot + * be copied. + * If the returned value is equal or less the @n value, the copy_to_user() + * functions has failed. Otherwise the record doesn't fit into the @to buffer. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these functions. + */ +static inline __must_check unsigned int kfifo_to_user_rec(struct kfifo *fifo, + void __user *to, unsigned int n, unsigned int recsize, + unsigned int *total) +{ + if (!__builtin_constant_p(recsize)) + return __kfifo_to_user_generic(fifo, to, n, recsize, total); + return __kfifo_to_user_rec(fifo, to, n, recsize, total); +} + +/** + * __kfifo_peek_... internal functions for peek into the next fifo record + * do not call it directly, use kfifo_peek_rec() instead + */ +extern unsigned int __kfifo_peek_generic(struct kfifo *fifo, + unsigned int recsize); + +/** + * kfifo_peek_rec - gets the size of the next FIFO record data + * @fifo: the fifo to be used. + * @recsize: size of record field + * + * This function returns the size of the next FIFO record in number of bytes + */ +static inline __must_check unsigned int kfifo_peek_rec(struct kfifo *fifo, + unsigned int recsize) +{ + if (!__builtin_constant_p(recsize)) + return __kfifo_peek_generic(fifo, recsize); + if (!recsize) + return kfifo_len(fifo); + return __kfifo_peek_n(fifo, recsize); +} + +/** + * __kfifo_skip_... internal functions for skip the next fifo record + * do not call it directly, use kfifo_skip_rec() instead + */ +extern void __kfifo_skip_generic(struct kfifo *fifo, unsigned int recsize); + +static inline void __kfifo_skip_rec(struct kfifo *fifo, + unsigned int recsize) +{ + unsigned int l; + + if (recsize) { + l = __kfifo_peek_n(fifo, recsize); + + if (l + recsize <= kfifo_len(fifo)) { + __kfifo_add_out(fifo, l + recsize); + return; + } + } + kfifo_reset_out(fifo); +} + +/** + * kfifo_skip_rec - skip the next fifo out record + * @fifo: the fifo to be used. + * @recsize: size of record field + * + * This function skips the next FIFO record + */ +static inline void kfifo_skip_rec(struct kfifo *fifo, + unsigned int recsize) +{ + if (!__builtin_constant_p(recsize)) + __kfifo_skip_generic(fifo, recsize); + else + __kfifo_skip_rec(fifo, recsize); +} + +/** + * kfifo_avail_rec - returns the number of bytes available in a record FIFO + * @fifo: the fifo to be used. + * @recsize: size of record field + */ +static inline __must_check unsigned int kfifo_avail_rec(struct kfifo *fifo, + unsigned int recsize) +{ + unsigned int l = kfifo_size(fifo) - kfifo_len(fifo); + + return (l > recsize) ? l - recsize : 0; +} + #endif diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 2a78425ef67f..e92d519f93b1 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -115,27 +115,11 @@ void kfifo_skip(struct kfifo *fifo, unsigned int len) } EXPORT_SYMBOL(kfifo_skip); -/** - * kfifo_in - puts some data into the FIFO - * @fifo: the fifo to be used. - * @from: the data to be added. - * @len: the length of the data to be added. - * - * This function copies at most @len bytes from the @from buffer into - * the FIFO depending on the free space, and returns the number of - * bytes copied. - * - * Note that with only one concurrent reader and one concurrent - * writer, you don't need extra locking to use these functions. - */ -unsigned int kfifo_in(struct kfifo *fifo, - const unsigned char *from, unsigned int len) +static inline void __kfifo_in_data(struct kfifo *fifo, + const void *from, unsigned int len, unsigned int off) { - unsigned int off; unsigned int l; - len = min(len, fifo->size - fifo->in + fifo->out); - /* * Ensure that we sample the fifo->out index -before- we * start putting bytes into the kfifo. @@ -143,7 +127,7 @@ unsigned int kfifo_in(struct kfifo *fifo, smp_mb(); - off = __kfifo_off(fifo, fifo->in); + off = __kfifo_off(fifo, fifo->in + off); /* first put the data starting from fifo->in to buffer end */ l = min(len, fifo->size - off); @@ -151,33 +135,13 @@ unsigned int kfifo_in(struct kfifo *fifo, /* then put the rest (if any) at the beginning of the buffer */ memcpy(fifo->buffer, from + l, len - l); - - __kfifo_add_in(fifo, len); - - return len; } -EXPORT_SYMBOL(kfifo_in); -/** - * kfifo_out - gets some data from the FIFO - * @fifo: the fifo to be used. - * @to: where the data must be copied. - * @len: the size of the destination buffer. - * - * This function copies at most @len bytes from the FIFO into the - * @to buffer and returns the number of copied bytes. - * - * Note that with only one concurrent reader and one concurrent - * writer, you don't need extra locking to use these functions. - */ -unsigned int kfifo_out(struct kfifo *fifo, - unsigned char *to, unsigned int len) +static inline void __kfifo_out_data(struct kfifo *fifo, + void *to, unsigned int len, unsigned int off) { - unsigned int off; unsigned int l; - len = min(len, fifo->in - fifo->out); - /* * Ensure that we sample the fifo->in index -before- we * start removing bytes from the kfifo. @@ -185,7 +149,7 @@ unsigned int kfifo_out(struct kfifo *fifo, smp_rmb(); - off = __kfifo_off(fifo, fifo->out); + off = __kfifo_off(fifo, fifo->out + off); /* first get the data from fifo->out until the end of the buffer */ l = min(len, fifo->size - off); @@ -193,34 +157,14 @@ unsigned int kfifo_out(struct kfifo *fifo, /* then get the rest (if any) from the beginning of the buffer */ memcpy(to + l, fifo->buffer, len - l); - - __kfifo_add_out(fifo, len); - - return len; } -EXPORT_SYMBOL(kfifo_out); -/** - * kfifo_from_user - puts some data from user space into the FIFO - * @fifo: the fifo to be used. - * @from: pointer to the data to be added. - * @len: the length of the data to be added. - * - * This function copies at most @len bytes from the @from into the - * FIFO depending and returns the number of copied bytes. - * - * Note that with only one concurrent reader and one concurrent - * writer, you don't need extra locking to use these functions. - */ -unsigned int kfifo_from_user(struct kfifo *fifo, - const void __user *from, unsigned int len) +static inline unsigned int __kfifo_from_user_data(struct kfifo *fifo, + const void __user *from, unsigned int len, unsigned int off) { - unsigned int off; unsigned int l; int ret; - len = min(len, fifo->size - fifo->in + fifo->out); - /* * Ensure that we sample the fifo->out index -before- we * start putting bytes into the kfifo. @@ -228,29 +172,101 @@ unsigned int kfifo_from_user(struct kfifo *fifo, smp_mb(); - off = __kfifo_off(fifo, fifo->in); + off = __kfifo_off(fifo, fifo->in + off); /* first put the data starting from fifo->in to buffer end */ l = min(len, fifo->size - off); ret = copy_from_user(fifo->buffer + off, from, l); if (unlikely(ret)) - return l - ret; + return ret + len - l; /* then put the rest (if any) at the beginning of the buffer */ - ret = copy_from_user(fifo->buffer, from + l, len - l); + return copy_from_user(fifo->buffer, from + l, len - l); +} + +static inline unsigned int __kfifo_to_user_data(struct kfifo *fifo, + void __user *to, unsigned int len, unsigned int off) +{ + unsigned int l; + int ret; + + /* + * Ensure that we sample the fifo->in index -before- we + * start removing bytes from the kfifo. + */ + + smp_rmb(); + + off = __kfifo_off(fifo, fifo->out + off); + + /* first get the data from fifo->out until the end of the buffer */ + l = min(len, fifo->size - off); + ret = copy_to_user(to, fifo->buffer + off, l); if (unlikely(ret)) - return len - ret; + return ret + len - l; - __kfifo_add_in(fifo, len); + /* then get the rest (if any) from the beginning of the buffer */ + return copy_to_user(to + l, fifo->buffer, len - l); +} +unsigned int __kfifo_in_n(struct kfifo *fifo, + const void *from, unsigned int len, unsigned int recsize) +{ + if (kfifo_avail(fifo) < len + recsize) + return len + 1; + + __kfifo_in_data(fifo, from, len, recsize); + return 0; +} +EXPORT_SYMBOL(__kfifo_in_n); + +/** + * kfifo_in - puts some data into the FIFO + * @fifo: the fifo to be used. + * @from: the data to be added. + * @len: the length of the data to be added. + * + * This function copies at most @len bytes from the @from buffer into + * the FIFO depending on the free space, and returns the number of + * bytes copied. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these functions. + */ +unsigned int kfifo_in(struct kfifo *fifo, const unsigned char *from, + unsigned int len) +{ + len = min(kfifo_avail(fifo), len); + + __kfifo_in_data(fifo, from, len, 0); + __kfifo_add_in(fifo, len); return len; } -EXPORT_SYMBOL(kfifo_from_user); +EXPORT_SYMBOL(kfifo_in); + +unsigned int __kfifo_in_generic(struct kfifo *fifo, + const void *from, unsigned int len, unsigned int recsize) +{ + return __kfifo_in_rec(fifo, from, len, recsize); +} +EXPORT_SYMBOL(__kfifo_in_generic); + +unsigned int __kfifo_out_n(struct kfifo *fifo, + void *to, unsigned int len, unsigned int recsize) +{ + if (kfifo_len(fifo) < len + recsize) + return len; + + __kfifo_out_data(fifo, to, len, recsize); + __kfifo_add_out(fifo, len + recsize); + return 0; +} +EXPORT_SYMBOL(__kfifo_out_n); /** - * kfifo_to_user - gets data from the FIFO and write it to user space + * kfifo_out - gets some data from the FIFO * @fifo: the fifo to be used. * @to: where the data must be copied. * @len: the size of the destination buffer. @@ -261,40 +277,124 @@ EXPORT_SYMBOL(kfifo_from_user); * Note that with only one concurrent reader and one concurrent * writer, you don't need extra locking to use these functions. */ -unsigned int kfifo_to_user(struct kfifo *fifo, - void __user *to, unsigned int len) +unsigned int kfifo_out(struct kfifo *fifo, unsigned char *to, unsigned int len) { - unsigned int off; - unsigned int l; - int ret; + len = min(kfifo_len(fifo), len); - len = min(len, fifo->in - fifo->out); + __kfifo_out_data(fifo, to, len, 0); + __kfifo_add_out(fifo, len); - /* - * Ensure that we sample the fifo->in index -before- we - * start removing bytes from the kfifo. - */ + return len; +} +EXPORT_SYMBOL(kfifo_out); - smp_rmb(); +unsigned int __kfifo_out_generic(struct kfifo *fifo, + void *to, unsigned int len, unsigned int recsize, + unsigned int *total) +{ + return __kfifo_out_rec(fifo, to, len, recsize, total); +} +EXPORT_SYMBOL(__kfifo_out_generic); - off = __kfifo_off(fifo, fifo->out); +unsigned int __kfifo_from_user_n(struct kfifo *fifo, + const void __user *from, unsigned int len, unsigned int recsize) +{ + if (kfifo_avail(fifo) < len + recsize) + return len + 1; - /* first get the data from fifo->out until the end of the buffer */ - l = min(len, fifo->size - off); - ret = copy_to_user(to, fifo->buffer + off, l); + return __kfifo_from_user_data(fifo, from, len, recsize); +} +EXPORT_SYMBOL(__kfifo_from_user_n); - if (unlikely(ret)) - return l - ret; +/** + * kfifo_from_user - puts some data from user space into the FIFO + * @fifo: the fifo to be used. + * @from: pointer to the data to be added. + * @len: the length of the data to be added. + * + * This function copies at most @len bytes from the @from into the + * FIFO depending and returns the number of copied bytes. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these functions. + */ +unsigned int kfifo_from_user(struct kfifo *fifo, + const void __user *from, unsigned int len) +{ + len = min(kfifo_avail(fifo), len); + len -= __kfifo_from_user_data(fifo, from, len, 0); + __kfifo_add_in(fifo, len); + return len; +} +EXPORT_SYMBOL(kfifo_from_user); - /* then get the rest (if any) from the beginning of the buffer */ - ret = copy_to_user(to + l, fifo->buffer, len - l); +unsigned int __kfifo_from_user_generic(struct kfifo *fifo, + const void __user *from, unsigned int len, unsigned int recsize) +{ + return __kfifo_from_user_rec(fifo, from, len, recsize); +} +EXPORT_SYMBOL(__kfifo_from_user_generic); - if (unlikely(ret)) - return len - ret; +unsigned int __kfifo_to_user_n(struct kfifo *fifo, + void __user *to, unsigned int len, unsigned int reclen, + unsigned int recsize) +{ + unsigned int ret; - __kfifo_add_out(fifo, len); + if (kfifo_len(fifo) < reclen + recsize) + return len; + ret = __kfifo_to_user_data(fifo, to, reclen, recsize); + + if (likely(ret == 0)) + __kfifo_add_out(fifo, reclen + recsize); + + return ret; +} +EXPORT_SYMBOL(__kfifo_to_user_n); + +/** + * kfifo_to_user - gets data from the FIFO and write it to user space + * @fifo: the fifo to be used. + * @to: where the data must be copied. + * @len: the size of the destination buffer. + * + * This function copies at most @len bytes from the FIFO into the + * @to buffer and returns the number of copied bytes. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these functions. + */ +unsigned int kfifo_to_user(struct kfifo *fifo, + void __user *to, unsigned int len) +{ + len = min(kfifo_len(fifo), len); + len -= __kfifo_to_user_data(fifo, to, len, 0); + __kfifo_add_out(fifo, len); return len; } EXPORT_SYMBOL(kfifo_to_user); +unsigned int __kfifo_to_user_generic(struct kfifo *fifo, + void __user *to, unsigned int len, unsigned int recsize, + unsigned int *total) +{ + return __kfifo_to_user_rec(fifo, to, len, recsize, total); +} +EXPORT_SYMBOL(__kfifo_to_user_generic); + +unsigned int __kfifo_peek_generic(struct kfifo *fifo, unsigned int recsize) +{ + if (recsize == 0) + return kfifo_avail(fifo); + + return __kfifo_peek_n(fifo, recsize); +} +EXPORT_SYMBOL(__kfifo_peek_generic); + +void __kfifo_skip_generic(struct kfifo *fifo, unsigned int recsize) +{ + __kfifo_skip_rec(fifo, recsize); +} +EXPORT_SYMBOL(__kfifo_skip_generic); + -- GitLab From 7801edb0b8b66e83c13623b483bc2e846c007c9d Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Mon, 21 Dec 2009 14:37:33 -0800 Subject: [PATCH 517/618] media video cx23888 driver: ported to new kfifo API Fix the cx23888 driver to use the new kfifo API. Using kfifo_reset() may result in a possible race conditions. This patch fixes it by using a spinlock around the kfifo_reset() function. Signed-off-by: Stefani Seibold Cc: Mauro Carvalho Chehab Reviewed-by: Andy Walls Acked-by: Andy Walls Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/media/video/cx23885/cx23888-ir.c | 44 ++++++++++-------------- 1 file changed, 19 insertions(+), 25 deletions(-) diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c index 3ccc8afeccf3..2bf57a4527d3 100644 --- a/drivers/media/video/cx23885/cx23888-ir.c +++ b/drivers/media/video/cx23885/cx23888-ir.c @@ -124,15 +124,12 @@ struct cx23888_ir_state { atomic_t rxclk_divider; atomic_t rx_invert; - struct kfifo *rx_kfifo; + struct kfifo rx_kfifo; spinlock_t rx_kfifo_lock; struct v4l2_subdev_ir_parameters tx_params; struct mutex tx_params_lock; atomic_t txclk_divider; - - struct kfifo *tx_kfifo; - spinlock_t tx_kfifo_lock; }; static inline struct cx23888_ir_state *to_state(struct v4l2_subdev *sd) @@ -522,6 +519,7 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status, { struct cx23888_ir_state *state = to_state(sd); struct cx23885_dev *dev = state->dev; + unsigned long flags; u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG); u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG); @@ -594,8 +592,9 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status, if (i == 0) break; j = i * sizeof(u32); - k = kfifo_put(state->rx_kfifo, - (unsigned char *) rx_data, j); + k = kfifo_in_locked(&state->rx_kfifo, + (unsigned char *) rx_data, j, + &state->rx_kfifo_lock); if (k != j) kror++; /* rx_kfifo over run */ } @@ -631,8 +630,11 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status, cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl); *handled = true; } - if (kfifo_len(state->rx_kfifo) >= CX23888_IR_RX_KFIFO_SIZE / 2) + + spin_lock_irqsave(&state->rx_kfifo_lock, flags); + if (kfifo_len(&state->rx_kfifo) >= CX23888_IR_RX_KFIFO_SIZE / 2) events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ; + spin_unlock_irqrestore(&state->rx_kfifo_lock, flags); if (events) v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events); @@ -657,7 +659,7 @@ static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count, return 0; } - n = kfifo_get(state->rx_kfifo, buf, n); + n = kfifo_out_locked(&state->rx_kfifo, buf, n, &state->rx_kfifo_lock); n /= sizeof(u32); *num = n * sizeof(u32); @@ -785,7 +787,12 @@ static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd, o->interrupt_enable = p->interrupt_enable; o->enable = p->enable; if (p->enable) { - kfifo_reset(state->rx_kfifo); + unsigned long flags; + + spin_lock_irqsave(&state->rx_kfifo_lock, flags); + kfifo_reset(&state->rx_kfifo); + /* reset tx_fifo too if there is one... */ + spin_unlock_irqrestore(&state->rx_kfifo_lock, flags); if (p->interrupt_enable) irqenable_rx(dev, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE); control_rx_enable(dev, p->enable); @@ -892,7 +899,6 @@ static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd, o->interrupt_enable = p->interrupt_enable; o->enable = p->enable; if (p->enable) { - kfifo_reset(state->tx_kfifo); if (p->interrupt_enable) irqenable_tx(dev, IRQEN_TSE); control_tx_enable(dev, p->enable); @@ -1168,18 +1174,8 @@ int cx23888_ir_probe(struct cx23885_dev *dev) return -ENOMEM; spin_lock_init(&state->rx_kfifo_lock); - state->rx_kfifo = kfifo_alloc(CX23888_IR_RX_KFIFO_SIZE, GFP_KERNEL, - &state->rx_kfifo_lock); - if (state->rx_kfifo == NULL) - return -ENOMEM; - - spin_lock_init(&state->tx_kfifo_lock); - state->tx_kfifo = kfifo_alloc(CX23888_IR_TX_KFIFO_SIZE, GFP_KERNEL, - &state->tx_kfifo_lock); - if (state->tx_kfifo == NULL) { - kfifo_free(state->rx_kfifo); + if (kfifo_alloc(&state->rx_kfifo, CX23888_IR_RX_KFIFO_SIZE, GFP_KERNEL)) return -ENOMEM; - } state->dev = dev; state->id = V4L2_IDENT_CX23888_IR; @@ -1211,8 +1207,7 @@ int cx23888_ir_probe(struct cx23885_dev *dev) sizeof(struct v4l2_subdev_ir_parameters)); v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params); } else { - kfifo_free(state->rx_kfifo); - kfifo_free(state->tx_kfifo); + kfifo_free(&state->rx_kfifo); } return ret; } @@ -1231,8 +1226,7 @@ int cx23888_ir_remove(struct cx23885_dev *dev) state = to_state(sd); v4l2_device_unregister_subdev(sd); - kfifo_free(state->rx_kfifo); - kfifo_free(state->tx_kfifo); + kfifo_free(&state->rx_kfifo); kfree(state); /* Nothing more to free() as state held the actual v4l2_subdev object */ return 0; -- GitLab From 01136acff8cc8251822fbae77f11e8029049c6f1 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 21 Dec 2009 02:24:47 +0100 Subject: [PATCH 518/618] DRM: Rename clamp variable linux/kernel.h has a "clamp" macro, but r300_cmdbuf also uses a variable with the same name. Right now it doesn't seem to include the header, but sooner or later someone will. So better rename the variable now. Signed-off-by: Andi Kleen Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r300_cmdbuf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c index cb2e470f97d4..34bffa0e4b73 100644 --- a/drivers/gpu/drm/radeon/r300_cmdbuf.c +++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c @@ -990,7 +990,7 @@ static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv, int sz; int addr; int type; - int clamp; + int isclamp; int stride; RING_LOCALS; @@ -999,10 +999,10 @@ static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv, addr = ((header.r500fp.adrhi_flags & 1) << 8) | header.r500fp.adrlo; type = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_TYPE); - clamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP); + isclamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP); addr |= (type << 16); - addr |= (clamp << 17); + addr |= (isclamp << 17); stride = type ? 4 : 6; -- GitLab From e265f39e1ff026dcc787f1953c048f3de5aefd16 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 19 Dec 2009 08:16:33 +0100 Subject: [PATCH 519/618] drivers/gpu: Use kzalloc for allocating only one thing Use kzalloc rather than kcalloc(1,...) The use of the allocated memory that looks like an array is &p->relocs[0], but this should be the same as p->relocs. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ @@ - kcalloc(1, + kzalloc( ...) // Signed-off-by: Julia Lawall Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_cs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 0d820764f340..44060b92d9e6 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -170,7 +170,7 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p, idx, relocs_chunk->length_dw); return -EINVAL; } - *cs_reloc = &p->relocs[0]; + *cs_reloc = p->relocs; (*cs_reloc)->lobj.gpu_offset = (u64)relocs_chunk->kdata[idx + 3] << 32; (*cs_reloc)->lobj.gpu_offset |= relocs_chunk->kdata[idx + 0]; return 0; @@ -717,7 +717,7 @@ static int r600_cs_parser_relocs_legacy(struct radeon_cs_parser *p) if (p->chunk_relocs_idx == -1) { return 0; } - p->relocs = kcalloc(1, sizeof(struct radeon_cs_reloc), GFP_KERNEL); + p->relocs = kzalloc(sizeof(struct radeon_cs_reloc), GFP_KERNEL); if (p->relocs == NULL) { return -ENOMEM; } -- GitLab From 794f3141a194a4f4c28c1d417b071a901f78d9bb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 20 Dec 2009 16:08:40 +1000 Subject: [PATCH 520/618] drm/radeon: fix build on 64-bit with some compilers. drivers/gpu/drm/radeon/radeon_test.c:45: undefined reference to `__udivdi3' Reported-by: Mr. James W. Laferriere Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index 391c973ec4db..9f5e2f929da9 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -42,8 +42,8 @@ void radeon_test_moves(struct radeon_device *rdev) /* Number of tests = * (Total GTT - IB pool - writeback page - ring buffer) / test size */ - n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE - - rdev->cp.ring_size) / size; + n = ((u32)(rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE - + rdev->cp.ring_size)) / size; gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL); if (!gtt_obj) { -- GitLab From e1f7800315d78686481b27b113a3317ac687b6bf Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Tue, 8 Dec 2009 12:57:51 +0100 Subject: [PATCH 521/618] drm/vmwgfx: Fix unlocked ioctl and add proper access control This fixes up vmwgfx for the unlocked ioctl code to avoid doing it in the driver. Also adds ioctl flags. Signed-off-by: Thomas Hellstrom Signed-off-by: Jakob Bornecrantz Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 47 ++++++++++++----------------- 1 file changed, 19 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 7b48bb3b63b2..1db1ef30be2b 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -103,37 +103,39 @@ */ static struct drm_ioctl_desc vmw_ioctls[] = { - VMW_IOCTL_DEF(DRM_IOCTL_VMW_GET_PARAM, vmw_getparam_ioctl, 0), + VMW_IOCTL_DEF(DRM_IOCTL_VMW_GET_PARAM, vmw_getparam_ioctl, + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_ALLOC_DMABUF, vmw_dmabuf_alloc_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_UNREF_DMABUF, vmw_dmabuf_unref_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CURSOR_BYPASS, - vmw_kms_cursor_bypass_ioctl, 0), + vmw_kms_cursor_bypass_ioctl, + DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CONTROL_STREAM, vmw_overlay_ioctl, - 0), + DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CLAIM_STREAM, vmw_stream_claim_ioctl, - 0), + DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_UNREF_STREAM, vmw_stream_unref_ioctl, - 0), + DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CREATE_CONTEXT, vmw_context_define_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_UNREF_CONTEXT, vmw_context_destroy_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CREATE_SURFACE, vmw_surface_define_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_UNREF_SURFACE, vmw_surface_destroy_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_REF_SURFACE, vmw_surface_reference_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_EXECBUF, vmw_execbuf_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_FIFO_DEBUG, vmw_fifo_debug_ioctl, - 0), + DRM_AUTH | DRM_ROOT_ONLY | DRM_MASTER | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_FENCE_WAIT, vmw_fence_wait_ioctl, - 0) + DRM_AUTH | DRM_UNLOCKED) }; static struct pci_device_id vmw_pci_id_list[] = { @@ -460,11 +462,9 @@ static long vmw_unlocked_ioctl(struct file *filp, unsigned int cmd, struct drm_file *file_priv = filp->private_data; struct drm_device *dev = file_priv->minor->dev; unsigned int nr = DRM_IOCTL_NR(cmd); - long ret; /* - * The driver private ioctls and TTM ioctls should be - * thread-safe. + * Do extra checking on driver private ioctls. */ if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) @@ -477,18 +477,9 @@ static long vmw_unlocked_ioctl(struct file *filp, unsigned int cmd, nr - DRM_COMMAND_BASE); return -EINVAL; } - return drm_ioctl(filp->f_path.dentry->d_inode, - filp, cmd, arg); } - /* - * Not all old drm ioctls are thread-safe. - */ - - lock_kernel(); - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); - return ret; + return drm_ioctl(filp, cmd, arg); } static int vmw_firstopen(struct drm_device *dev) -- GitLab From 3d3a5b3290043618e8409f3fb68a63de6156fdd4 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Tue, 8 Dec 2009 12:59:34 +0100 Subject: [PATCH 522/618] drm/vmwgfx: Return -ERESTARTSYS when interrupted by a signal. Fixes for TTM API change. Signed-off-by: Thomas Hellstrom Signed-off-by: Jakob Bornecrantz Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 4 ++-- drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 6 ++---- drivers/gpu/drm/vmwgfx/vmwgfx_irq.c | 6 ++---- 3 files changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 7a39f3e6dc2c..7e73cf51e298 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -386,7 +386,7 @@ static int vmw_validate_single_buffer(struct vmw_private *dev_priv, return 0; ret = vmw_gmr_bind(dev_priv, bo); - if (likely(ret == 0 || ret == -ERESTART)) + if (likely(ret == 0 || ret == -ERESTARTSYS)) return ret; @@ -429,7 +429,7 @@ int vmw_execbuf_ioctl(struct drm_device *dev, void *data, ret = mutex_lock_interruptible(&dev_priv->cmdbuf_mutex); if (unlikely(ret != 0)) { - ret = -ERESTART; + ret = -ERESTARTSYS; goto out_no_cmd_mutex; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index 76b0693e2458..01feb48af333 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -191,7 +191,7 @@ static int vmw_fifo_wait_noirq(struct vmw_private *dev_priv, } schedule_timeout(1); if (interruptible && signal_pending(current)) { - ret = -ERESTART; + ret = -ERESTARTSYS; break; } } @@ -237,9 +237,7 @@ static int vmw_fifo_wait(struct vmw_private *dev_priv, (dev_priv->fifo_queue, !vmw_fifo_is_full(dev_priv, bytes), timeout); - if (unlikely(ret == -ERESTARTSYS)) - ret = -ERESTART; - else if (unlikely(ret == 0)) + if (unlikely(ret == 0)) ret = -EBUSY; else if (likely(ret > 0)) ret = 0; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c index 9e0f0306eedb..d40086fc8647 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c @@ -155,7 +155,7 @@ int vmw_fallback_wait(struct vmw_private *dev_priv, TASK_UNINTERRUPTIBLE); } if (interruptible && signal_pending(current)) { - ret = -ERESTART; + ret = -ERESTARTSYS; break; } } @@ -218,9 +218,7 @@ int vmw_wait_fence(struct vmw_private *dev_priv, vmw_fence_signaled(dev_priv, sequence), timeout); - if (unlikely(ret == -ERESTARTSYS)) - ret = -ERESTART; - else if (unlikely(ret == 0)) + if (unlikely(ret == 0)) ret = -EBUSY; else if (likely(ret > 0)) ret = 0; -- GitLab From 7a73ba7469cbea631050094fd14f73acebb97cf9 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Tue, 22 Dec 2009 16:53:41 +0100 Subject: [PATCH 523/618] drm/vmwgfx: Use TTM handles instead of SIDs as user-space surface handles. Improve the command verifier to catch all occurences of surface handles, and translate to SIDs. This way DMA buffers and 3D surfaces share a common handle space, which makes it possible for the kms code to differentiate. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 10 +- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 153 +++++++++++++++++++---- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 8 +- drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 149 +++++++++++----------- 4 files changed, 209 insertions(+), 111 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 43546d09d1b0..e61bd85b6975 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -123,6 +123,7 @@ struct vmw_sw_context{ uint32_t last_cid; bool cid_valid; uint32_t last_sid; + uint32_t sid_translation; bool sid_valid; struct ttm_object_file *tfile; struct list_head validate_nodes; @@ -317,9 +318,10 @@ extern void vmw_surface_res_free(struct vmw_resource *res); extern int vmw_surface_init(struct vmw_private *dev_priv, struct vmw_surface *srf, void (*res_free) (struct vmw_resource *res)); -extern int vmw_user_surface_lookup(struct vmw_private *dev_priv, - struct ttm_object_file *tfile, - int sid, struct vmw_surface **out); +extern int vmw_user_surface_lookup_handle(struct vmw_private *dev_priv, + struct ttm_object_file *tfile, + uint32_t handle, + struct vmw_surface **out); extern int vmw_surface_destroy_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int vmw_surface_define_ioctl(struct drm_device *dev, void *data, @@ -328,7 +330,7 @@ extern int vmw_surface_reference_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int vmw_surface_check(struct vmw_private *dev_priv, struct ttm_object_file *tfile, - int id); + uint32_t handle, int *id); extern void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo); extern int vmw_dmabuf_init(struct vmw_private *dev_priv, struct vmw_dma_buffer *vmw_bo, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 7e73cf51e298..2e92da567403 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -73,21 +73,32 @@ static int vmw_cmd_cid_check(struct vmw_private *dev_priv, static int vmw_cmd_sid_check(struct vmw_private *dev_priv, struct vmw_sw_context *sw_context, - uint32_t sid) + uint32_t *sid) { - if (unlikely((!sw_context->sid_valid || sid != sw_context->last_sid) && - sid != SVGA3D_INVALID_ID)) { - int ret = vmw_surface_check(dev_priv, sw_context->tfile, sid); + if (*sid == SVGA3D_INVALID_ID) + return 0; + + if (unlikely((!sw_context->sid_valid || + *sid != sw_context->last_sid))) { + int real_id; + int ret = vmw_surface_check(dev_priv, sw_context->tfile, + *sid, &real_id); if (unlikely(ret != 0)) { - DRM_ERROR("Could ot find or use surface %u\n", - (unsigned) sid); + DRM_ERROR("Could ot find or use surface 0x%08x " + "address 0x%08lx\n", + (unsigned int) *sid, + (unsigned long) sid); return ret; } - sw_context->last_sid = sid; + sw_context->last_sid = *sid; sw_context->sid_valid = true; - } + *sid = real_id; + sw_context->sid_translation = real_id; + } else + *sid = sw_context->sid_translation; + return 0; } @@ -107,7 +118,8 @@ static int vmw_cmd_set_render_target_check(struct vmw_private *dev_priv, return ret; cmd = container_of(header, struct vmw_sid_cmd, header); - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.target.sid); + ret = vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.target.sid); + return ret; } static int vmw_cmd_surface_copy_check(struct vmw_private *dev_priv, @@ -121,10 +133,10 @@ static int vmw_cmd_surface_copy_check(struct vmw_private *dev_priv, int ret; cmd = container_of(header, struct vmw_sid_cmd, header); - ret = vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.src.sid); + ret = vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.src.sid); if (unlikely(ret != 0)) return ret; - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.dest.sid); + return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.dest.sid); } static int vmw_cmd_stretch_blt_check(struct vmw_private *dev_priv, @@ -138,10 +150,10 @@ static int vmw_cmd_stretch_blt_check(struct vmw_private *dev_priv, int ret; cmd = container_of(header, struct vmw_sid_cmd, header); - ret = vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.src.sid); + ret = vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.src.sid); if (unlikely(ret != 0)) return ret; - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.dest.sid); + return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.dest.sid); } static int vmw_cmd_blt_surf_screen_check(struct vmw_private *dev_priv, @@ -154,7 +166,7 @@ static int vmw_cmd_blt_surf_screen_check(struct vmw_private *dev_priv, } *cmd; cmd = container_of(header, struct vmw_sid_cmd, header); - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.srcImage.sid); + return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.srcImage.sid); } static int vmw_cmd_present_check(struct vmw_private *dev_priv, @@ -167,7 +179,7 @@ static int vmw_cmd_present_check(struct vmw_private *dev_priv, } *cmd; cmd = container_of(header, struct vmw_sid_cmd, header); - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.sid); + return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.sid); } static int vmw_cmd_dma(struct vmw_private *dev_priv, @@ -187,12 +199,7 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, uint32_t cur_validate_node; struct ttm_validate_buffer *val_buf; - cmd = container_of(header, struct vmw_dma_cmd, header); - ret = vmw_cmd_sid_check(dev_priv, sw_context, cmd->dma.host.sid); - if (unlikely(ret != 0)) - return ret; - handle = cmd->dma.guest.ptr.gmrId; ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo); if (unlikely(ret != 0)) { @@ -228,14 +235,23 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, ++sw_context->cur_val_buf; } - ret = vmw_user_surface_lookup(dev_priv, sw_context->tfile, - cmd->dma.host.sid, &srf); + ret = vmw_user_surface_lookup_handle(dev_priv, sw_context->tfile, + cmd->dma.host.sid, &srf); if (ret) { DRM_ERROR("could not find surface\n"); goto out_no_reloc; } + /** + * Patch command stream with device SID. + */ + + cmd->dma.host.sid = srf->res.id; vmw_kms_cursor_snoop(srf, sw_context->tfile, bo, header); + /** + * FIXME: May deadlock here when called from the + * command parsing code. + */ vmw_surface_unreference(&srf); out_no_reloc: @@ -243,6 +259,90 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, return ret; } +static int vmw_cmd_draw(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct vmw_draw_cmd { + SVGA3dCmdHeader header; + SVGA3dCmdDrawPrimitives body; + } *cmd; + SVGA3dVertexDecl *decl = (SVGA3dVertexDecl *)( + (unsigned long)header + sizeof(*cmd)); + SVGA3dPrimitiveRange *range; + uint32_t i; + uint32_t maxnum; + int ret; + + ret = vmw_cmd_cid_check(dev_priv, sw_context, header); + if (unlikely(ret != 0)) + return ret; + + cmd = container_of(header, struct vmw_draw_cmd, header); + maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); + + if (unlikely(cmd->body.numVertexDecls > maxnum)) { + DRM_ERROR("Illegal number of vertex declarations.\n"); + return -EINVAL; + } + + for (i = 0; i < cmd->body.numVertexDecls; ++i, ++decl) { + ret = vmw_cmd_sid_check(dev_priv, sw_context, + &decl->array.surfaceId); + if (unlikely(ret != 0)) + return ret; + } + + maxnum = (header->size - sizeof(cmd->body) - + cmd->body.numVertexDecls * sizeof(*decl)) / sizeof(*range); + if (unlikely(cmd->body.numRanges > maxnum)) { + DRM_ERROR("Illegal number of index ranges.\n"); + return -EINVAL; + } + + range = (SVGA3dPrimitiveRange *) decl; + for (i = 0; i < cmd->body.numRanges; ++i, ++range) { + ret = vmw_cmd_sid_check(dev_priv, sw_context, + &range->indexArray.surfaceId); + if (unlikely(ret != 0)) + return ret; + } + return 0; +} + + +static int vmw_cmd_tex_state(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct vmw_tex_state_cmd { + SVGA3dCmdHeader header; + SVGA3dCmdSetTextureState state; + }; + + SVGA3dTextureState *last_state = (SVGA3dTextureState *) + ((unsigned long) header + header->size + sizeof(header)); + SVGA3dTextureState *cur_state = (SVGA3dTextureState *) + ((unsigned long) header + sizeof(struct vmw_tex_state_cmd)); + int ret; + + ret = vmw_cmd_cid_check(dev_priv, sw_context, header); + if (unlikely(ret != 0)) + return ret; + + for (; cur_state < last_state; ++cur_state) { + if (likely(cur_state->name != SVGA3D_TS_BIND_TEXTURE)) + continue; + + ret = vmw_cmd_sid_check(dev_priv, sw_context, + &cur_state->value); + if (unlikely(ret != 0)) + return ret; + } + + return 0; +} + typedef int (*vmw_cmd_func) (struct vmw_private *, struct vmw_sw_context *, @@ -264,7 +364,7 @@ static vmw_cmd_func vmw_cmd_funcs[SVGA_3D_CMD_MAX] = { VMW_CMD_DEF(SVGA_3D_CMD_SETRENDERSTATE, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SETRENDERTARGET, &vmw_cmd_set_render_target_check), - VMW_CMD_DEF(SVGA_3D_CMD_SETTEXTURESTATE, &vmw_cmd_cid_check), + VMW_CMD_DEF(SVGA_3D_CMD_SETTEXTURESTATE, &vmw_cmd_tex_state), VMW_CMD_DEF(SVGA_3D_CMD_SETMATERIAL, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SETLIGHTDATA, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SETLIGHTENABLED, &vmw_cmd_cid_check), @@ -276,7 +376,7 @@ static vmw_cmd_func vmw_cmd_funcs[SVGA_3D_CMD_MAX] = { VMW_CMD_DEF(SVGA_3D_CMD_SHADER_DESTROY, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SET_SHADER, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SET_SHADER_CONST, &vmw_cmd_cid_check), - VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_cid_check), + VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_draw), VMW_CMD_DEF(SVGA_3D_CMD_SETSCISSORRECT, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_BEGIN_QUERY, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_cid_check), @@ -291,6 +391,7 @@ static int vmw_cmd_check(struct vmw_private *dev_priv, void *buf, uint32_t *size) { uint32_t cmd_id; + uint32_t size_remaining = *size; SVGA3dCmdHeader *header = (SVGA3dCmdHeader *) buf; int ret; @@ -304,6 +405,9 @@ static int vmw_cmd_check(struct vmw_private *dev_priv, *size = le32_to_cpu(header->size) + sizeof(SVGA3dCmdHeader); cmd_id -= SVGA_3D_CMD_BASE; + if (unlikely(*size > size_remaining)) + goto out_err; + if (unlikely(cmd_id >= SVGA_3D_CMD_MAX - SVGA_3D_CMD_BASE)) goto out_err; @@ -326,6 +430,7 @@ static int vmw_cmd_check_all(struct vmw_private *dev_priv, int ret; while (cur_size > 0) { + size = cur_size; ret = vmw_cmd_check(dev_priv, sw_context, buf, &size); if (unlikely(ret != 0)) return ret; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index e9403be446fe..b1af76e371c3 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -106,8 +106,8 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, int ret; if (handle) { - ret = vmw_user_surface_lookup(dev_priv, tfile, - handle, &surface); + ret = vmw_user_surface_lookup_handle(dev_priv, tfile, + handle, &surface); if (!ret) { if (!surface->snooper.image) { DRM_ERROR("surface not suitable for cursor\n"); @@ -704,8 +704,8 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, struct vmw_dma_buffer *bo = NULL; int ret; - ret = vmw_user_surface_lookup(dev_priv, tfile, - mode_cmd->handle, &surface); + ret = vmw_user_surface_lookup_handle(dev_priv, tfile, + mode_cmd->handle, &surface); if (ret) goto try_dmabuf; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index a1ceed0c8e07..c012d5927f65 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -488,28 +488,44 @@ static void vmw_user_surface_free(struct vmw_resource *res) kfree(user_srf); } -int vmw_user_surface_lookup(struct vmw_private *dev_priv, - struct ttm_object_file *tfile, - int sid, struct vmw_surface **out) +int vmw_user_surface_lookup_handle(struct vmw_private *dev_priv, + struct ttm_object_file *tfile, + uint32_t handle, struct vmw_surface **out) { struct vmw_resource *res; struct vmw_surface *srf; struct vmw_user_surface *user_srf; + struct ttm_base_object *base; + int ret = -EINVAL; - res = vmw_resource_lookup(dev_priv, &dev_priv->surface_idr, sid); - if (unlikely(res == NULL)) + base = ttm_base_object_lookup(tfile, handle); + if (unlikely(base == NULL)) return -EINVAL; - if (res->res_free != &vmw_user_surface_free) - return -EINVAL; + if (unlikely(base->object_type != VMW_RES_SURFACE)) + goto out_bad_resource; - srf = container_of(res, struct vmw_surface, res); - user_srf = container_of(srf, struct vmw_user_surface, srf); - if (user_srf->base.tfile != tfile && !user_srf->base.shareable) - return -EPERM; + user_srf = container_of(base, struct vmw_user_surface, base); + srf = &user_srf->srf; + res = &srf->res; + + read_lock(&dev_priv->resource_lock); + + if (!res->avail || res->res_free != &vmw_user_surface_free) { + read_unlock(&dev_priv->resource_lock); + goto out_bad_resource; + } + + kref_get(&res->kref); + read_unlock(&dev_priv->resource_lock); *out = srf; - return 0; + ret = 0; + +out_bad_resource: + ttm_base_object_unref(&base); + + return ret; } static void vmw_user_surface_base_release(struct ttm_base_object **p_base) @@ -526,35 +542,10 @@ static void vmw_user_surface_base_release(struct ttm_base_object **p_base) int vmw_surface_destroy_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - struct vmw_private *dev_priv = vmw_priv(dev); - struct vmw_resource *res; - struct vmw_surface *srf; - struct vmw_user_surface *user_srf; struct drm_vmw_surface_arg *arg = (struct drm_vmw_surface_arg *)data; struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; - int ret = 0; - - res = vmw_resource_lookup(dev_priv, &dev_priv->surface_idr, arg->sid); - if (unlikely(res == NULL)) - return -EINVAL; - - if (res->res_free != &vmw_user_surface_free) { - ret = -EINVAL; - goto out; - } - srf = container_of(res, struct vmw_surface, res); - user_srf = container_of(srf, struct vmw_user_surface, srf); - if (user_srf->base.tfile != tfile && !user_srf->base.shareable) { - ret = -EPERM; - goto out; - } - - ttm_ref_object_base_unref(tfile, user_srf->base.hash.key, - TTM_REF_USAGE); -out: - vmw_resource_unreference(&res); - return ret; + return ttm_ref_object_base_unref(tfile, arg->sid, TTM_REF_USAGE); } int vmw_surface_define_ioctl(struct drm_device *dev, void *data, @@ -649,7 +640,10 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, } srf->snooper.crtc = NULL; - rep->sid = res->id; + rep->sid = user_srf->base.hash.key; + if (rep->sid == SVGA3D_INVALID_ID) + DRM_ERROR("Created bad Surface ID.\n"); + vmw_resource_unreference(&res); return 0; out_err1: @@ -662,39 +656,33 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, int vmw_surface_reference_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - struct vmw_private *dev_priv = vmw_priv(dev); union drm_vmw_surface_reference_arg *arg = (union drm_vmw_surface_reference_arg *)data; struct drm_vmw_surface_arg *req = &arg->req; struct drm_vmw_surface_create_req *rep = &arg->rep; struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; - struct vmw_resource *res; struct vmw_surface *srf; struct vmw_user_surface *user_srf; struct drm_vmw_size __user *user_sizes; - int ret; + struct ttm_base_object *base; + int ret = -EINVAL; - res = vmw_resource_lookup(dev_priv, &dev_priv->surface_idr, req->sid); - if (unlikely(res == NULL)) + base = ttm_base_object_lookup(tfile, req->sid); + if (unlikely(base == NULL)) { + DRM_ERROR("Could not find surface to reference.\n"); return -EINVAL; - - if (res->res_free != &vmw_user_surface_free) { - ret = -EINVAL; - goto out; } - srf = container_of(res, struct vmw_surface, res); - user_srf = container_of(srf, struct vmw_user_surface, srf); - if (user_srf->base.tfile != tfile && !user_srf->base.shareable) { - DRM_ERROR("Tried to reference none shareable surface\n"); - ret = -EPERM; - goto out; - } + if (unlikely(base->object_type != VMW_RES_SURFACE)) + goto out_bad_resource; + + user_srf = container_of(base, struct vmw_user_surface, base); + srf = &user_srf->srf; ret = ttm_ref_object_add(tfile, &user_srf->base, TTM_REF_USAGE, NULL); if (unlikely(ret != 0)) { DRM_ERROR("Could not add a reference to a surface.\n"); - goto out; + goto out_no_reference; } rep->flags = srf->flags; @@ -706,40 +694,43 @@ int vmw_surface_reference_ioctl(struct drm_device *dev, void *data, if (user_sizes) ret = copy_to_user(user_sizes, srf->sizes, srf->num_sizes * sizeof(*srf->sizes)); - if (unlikely(ret != 0)) { + if (unlikely(ret != 0)) DRM_ERROR("copy_to_user failed %p %u\n", user_sizes, srf->num_sizes); - /** - * FIXME: Unreference surface here? - */ - goto out; - } -out: - vmw_resource_unreference(&res); +out_bad_resource: +out_no_reference: + ttm_base_object_unref(&base); + return ret; } int vmw_surface_check(struct vmw_private *dev_priv, struct ttm_object_file *tfile, - int id) + uint32_t handle, int *id) { - struct vmw_resource *res; - int ret = 0; + struct ttm_base_object *base; + struct vmw_user_surface *user_srf; - read_lock(&dev_priv->resource_lock); - res = idr_find(&dev_priv->surface_idr, id); - if (res && res->avail) { - struct vmw_surface *srf = - container_of(res, struct vmw_surface, res); - struct vmw_user_surface *usrf = - container_of(srf, struct vmw_user_surface, srf); + int ret = -EPERM; - if (usrf->base.tfile != tfile && !usrf->base.shareable) - ret = -EPERM; - } else - ret = -EINVAL; - read_unlock(&dev_priv->resource_lock); + base = ttm_base_object_lookup(tfile, handle); + if (unlikely(base == NULL)) + return -EINVAL; + + if (unlikely(base->object_type != VMW_RES_SURFACE)) + goto out_bad_surface; + user_srf = container_of(base, struct vmw_user_surface, base); + *id = user_srf->srf.res.id; + ret = 0; + +out_bad_surface: + /** + * FIXME: May deadlock here when called from the + * command parsing code. + */ + + ttm_base_object_unref(&base); return ret; } -- GitLab From e2108eb1f66d77b4af77caf282cab1d47e3f4831 Mon Sep 17 00:00:00 2001 From: Bob Gleitsmann Date: Mon, 21 Dec 2009 13:52:09 +1000 Subject: [PATCH 524/618] drm/mm: fix logic for selection of best fit block This is from bug 25728. [airlied: I'm just forwarding the patch for review, Thomas, ickle?] Acked-by: Jerome Glisse Acked-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_mm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index d7d7eac3ddd2..cdec32977129 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -358,7 +358,7 @@ struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm, if (entry->size >= size + wasted) { if (!best_match) return entry; - if (size < best_size) { + if (entry->size < best_size) { best = entry; best_size = entry->size; } @@ -408,7 +408,7 @@ struct drm_mm_node *drm_mm_search_free_in_range(const struct drm_mm *mm, if (entry->size >= size + wasted) { if (!best_match) return entry; - if (size < best_size) { + if (entry->size < best_size) { best = entry; best_size = entry->size; } -- GitLab From 29ebdf925c2c45f6531a953c6c5c8e4d3b4ac2dc Mon Sep 17 00:00:00 2001 From: Marin Mitov Date: Sun, 20 Dec 2009 09:03:27 +0200 Subject: [PATCH 525/618] drm/kms: silencing a false positive warning. warning: 'width' may be used uninitialized in this function drivers/gpu/drm/drm_edid.c Signed-off-by: Marin Mitov Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index c39b26f1abed..5c9f79877cbf 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -913,7 +913,7 @@ static int drm_cvt_modes(struct drm_connector *connector, const int rates[] = { 60, 85, 75, 60, 50 }; for (i = 0; i < 4; i++) { - int width, height; + int uninitialized_var(width), height; cvt = &(timing->data.other_data.data.cvt[i]); height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 8) + 1) * 2; -- GitLab From edc664e314d5dadc326cfc15a536fe906d652204 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 17 Dec 2009 11:22:01 -0500 Subject: [PATCH 526/618] drm/radeon/kms/atom: fill in proper defines for digital setup Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 0d1d908e5225..547fe105e19f 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -495,9 +495,9 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE; args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { - if (dig->lvds_misc & (1 << 0)) + if (dig->lvds_misc & ATOM_PANEL_MISC_DUAL) args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL; - if (dig->lvds_misc & (1 << 1)) + if (dig->lvds_misc & ATOM_PANEL_MISC_888RGB) args.v1.ucMisc |= (1 << 1); } else { if (dig_connector->linkb) @@ -524,18 +524,18 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) args.v2.ucTemporal = 0; args.v2.ucFRC = 0; if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { - if (dig->lvds_misc & (1 << 0)) + if (dig->lvds_misc & ATOM_PANEL_MISC_DUAL) args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL; - if (dig->lvds_misc & (1 << 5)) { + if (dig->lvds_misc & ATOM_PANEL_MISC_SPATIAL) { args.v2.ucSpatial = PANEL_ENCODER_SPATIAL_DITHER_EN; - if (dig->lvds_misc & (1 << 1)) + if (dig->lvds_misc & ATOM_PANEL_MISC_888RGB) args.v2.ucSpatial |= PANEL_ENCODER_SPATIAL_DITHER_DEPTH; } - if (dig->lvds_misc & (1 << 6)) { + if (dig->lvds_misc & ATOM_PANEL_MISC_TEMPORAL) { args.v2.ucTemporal = PANEL_ENCODER_TEMPORAL_DITHER_EN; - if (dig->lvds_misc & (1 << 1)) + if (dig->lvds_misc & ATOM_PANEL_MISC_888RGB) args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_DITHER_DEPTH; - if (((dig->lvds_misc >> 2) & 0x3) == 2) + if (((dig->lvds_misc >> ATOM_PANEL_MISC_GREY_LEVEL_SHIFT) & 0x3) == 2) args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_LEVEL_4; } } else { -- GitLab From 310a82c8c5fc431913fe34a17251118e71c2c876 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 17 Dec 2009 01:24:59 -0500 Subject: [PATCH 527/618] drm/radeon/kms: fix legacy rmx This makes 640x480 on my R100 work again, both in aspect and centered mode. Signed-off-by: Alex Deucher Tested-by: Dave Airlie Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 2 ++ drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 5 ++--- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 2 ++ 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 547fe105e19f..ccba95f83d11 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -233,6 +233,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, if (!ASIC_IS_AVIVO(rdev)) { adjusted_mode->hdisplay = mode->hdisplay; adjusted_mode->vdisplay = mode->vdisplay; + adjusted_mode->crtc_hdisplay = mode->hdisplay; + adjusted_mode->crtc_vdisplay = mode->vdisplay; } adjusted_mode->base.id = mode_id; } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index b82ede98e152..cc27485a07ad 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -43,8 +43,7 @@ static void radeon_overscan_setup(struct drm_crtc *crtc, } static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) + struct drm_display_mode *mode) { struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; @@ -1059,7 +1058,7 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc, radeon_set_pll(crtc, adjusted_mode); radeon_overscan_setup(crtc, adjusted_mode); if (radeon_crtc->crtc_id == 0) { - radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode); + radeon_legacy_rmx_mode_set(crtc, adjusted_mode); } else { if (radeon_crtc->rmx_type != RMX_OFF) { /* FIXME: only first crtc has rmx what should we diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index df00515e81fa..981508ff7037 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -207,6 +207,8 @@ static bool radeon_legacy_mode_fixup(struct drm_encoder *encoder, *adjusted_mode = *native_mode; adjusted_mode->hdisplay = mode->hdisplay; adjusted_mode->vdisplay = mode->vdisplay; + adjusted_mode->crtc_hdisplay = mode->hdisplay; + adjusted_mode->crtc_vdisplay = mode->vdisplay; adjusted_mode->base.id = mode_id; } -- GitLab From d79766fab9975c6414ebab7d2abf017834a48c35 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 17 Dec 2009 19:00:29 -0500 Subject: [PATCH 528/618] drm/radeon/kms: set proper default tv standard we were just using 1 before. reported on irc by soreau Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 56 ++++++++++++++++++++++ drivers/gpu/drm/radeon/radeon_combios.c | 9 ++-- drivers/gpu/drm/radeon/radeon_connectors.c | 4 +- drivers/gpu/drm/radeon/radeon_display.c | 2 +- drivers/gpu/drm/radeon/radeon_mode.h | 6 +++ 5 files changed, 69 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 12a0c760e7ff..b5912c26b1db 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1234,6 +1234,61 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, return true; } +enum radeon_tv_std +radeon_atombios_get_tv_info(struct radeon_device *rdev) +{ + struct radeon_mode_info *mode_info = &rdev->mode_info; + int index = GetIndexIntoMasterTable(DATA, AnalogTV_Info); + uint16_t data_offset; + uint8_t frev, crev; + struct _ATOM_ANALOG_TV_INFO *tv_info; + enum radeon_tv_std tv_std = TV_STD_NTSC; + + atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, &crev, &data_offset); + + tv_info = (struct _ATOM_ANALOG_TV_INFO *)(mode_info->atom_context->bios + data_offset); + + switch (tv_info->ucTV_BootUpDefaultStandard) { + case ATOM_TV_NTSC: + tv_std = TV_STD_NTSC; + DRM_INFO("Default TV standard: NTSC\n"); + break; + case ATOM_TV_NTSCJ: + tv_std = TV_STD_NTSC_J; + DRM_INFO("Default TV standard: NTSC-J\n"); + break; + case ATOM_TV_PAL: + tv_std = TV_STD_PAL; + DRM_INFO("Default TV standard: PAL\n"); + break; + case ATOM_TV_PALM: + tv_std = TV_STD_PAL_M; + DRM_INFO("Default TV standard: PAL-M\n"); + break; + case ATOM_TV_PALN: + tv_std = TV_STD_PAL_N; + DRM_INFO("Default TV standard: PAL-N\n"); + break; + case ATOM_TV_PALCN: + tv_std = TV_STD_PAL_CN; + DRM_INFO("Default TV standard: PAL-CN\n"); + break; + case ATOM_TV_PAL60: + tv_std = TV_STD_PAL_60; + DRM_INFO("Default TV standard: PAL-60\n"); + break; + case ATOM_TV_SECAM: + tv_std = TV_STD_SECAM; + DRM_INFO("Default TV standard: SECAM\n"); + break; + default: + tv_std = TV_STD_NTSC; + DRM_INFO("Unknown TV standard; defaulting to NTSC\n"); + break; + } + return tv_std; +} + struct radeon_encoder_tv_dac * radeon_atombios_get_tv_dac_info(struct radeon_encoder *encoder) { @@ -1269,6 +1324,7 @@ radeon_atombios_get_tv_dac_info(struct radeon_encoder *encoder) dac = dac_info->ucDAC2_NTSC_DAC_Adjustment; tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20); + tv_dac->tv_std = radeon_atombios_get_tv_info(rdev); } return tv_dac; } diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index c5021a3445de..fd94dbca33ac 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -634,11 +634,10 @@ struct radeon_encoder_primary_dac *radeon_combios_get_primary_dac_info(struct return p_dac; } -static enum radeon_tv_std -radeon_combios_get_tv_info(struct radeon_encoder *encoder) +enum radeon_tv_std +radeon_combios_get_tv_info(struct radeon_device *rdev) { - struct drm_device *dev = encoder->base.dev; - struct radeon_device *rdev = dev->dev_private; + struct drm_device *dev = rdev->ddev; uint16_t tv_info; enum radeon_tv_std tv_std = TV_STD_NTSC; @@ -779,7 +778,7 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20); found = 1; } - tv_dac->tv_std = radeon_combios_get_tv_info(encoder); + tv_dac->tv_std = radeon_combios_get_tv_info(rdev); } if (!found) { /* then check CRT table */ diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 5eece186e03c..8da06e17ff27 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1171,7 +1171,7 @@ radeon_add_atom_connector(struct drm_device *dev, 1); drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.tv_std_property, - 1); + radeon_atombios_get_tv_info(rdev)); } break; case DRM_MODE_CONNECTOR_LVDS: @@ -1315,7 +1315,7 @@ radeon_add_legacy_connector(struct drm_device *dev, 1); drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.tv_std_property, - 1); + radeon_combios_get_tv_info(rdev)); } break; case DRM_MODE_CONNECTOR_LVDS: diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index a133b833e45d..91d72b70abc9 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -739,7 +739,7 @@ static struct drm_prop_enum_list radeon_tv_std_enum_list[] = { TV_STD_SECAM, "secam" }, }; -int radeon_modeset_create_props(struct radeon_device *rdev) +static int radeon_modeset_create_props(struct radeon_device *rdev) { int i, sz; diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 3dcbe130c422..402369db5ba0 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -88,6 +88,7 @@ enum radeon_tv_std { TV_STD_SCART_PAL, TV_STD_SECAM, TV_STD_PAL_CN, + TV_STD_PAL_N, }; /* radeon gpio-based i2c @@ -395,6 +396,11 @@ struct radeon_framebuffer { struct drm_gem_object *obj; }; +extern enum radeon_tv_std +radeon_combios_get_tv_info(struct radeon_device *rdev); +extern enum radeon_tv_std +radeon_atombios_get_tv_info(struct radeon_device *rdev); + extern void radeon_connector_hotplug(struct drm_connector *connector); extern bool radeon_dp_needs_link_train(struct radeon_connector *radeon_connector); extern int radeon_dp_mode_valid_helper(struct radeon_connector *radeon_connector, -- GitLab From c31ad97f1886a2ff0f3356dc31d50c57944365da Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 17 Dec 2009 00:00:46 +0100 Subject: [PATCH 529/618] drm/radeon/kms: prevent parallel AtomBIOS calls MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This just adds a mutex around the atombios table execution so we don't call it from two contexts at once. Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atom.c | 12 ++++++++++-- drivers/gpu/drm/radeon/atom.h | 1 + drivers/gpu/drm/radeon/radeon_device.c | 1 + 3 files changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index 6578d19dff93..388140a7e651 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -58,6 +58,7 @@ typedef struct { } atom_exec_context; int atom_debug = 0; +static void atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params); void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params); static uint32_t atom_arg_mask[8] = @@ -573,7 +574,7 @@ static void atom_op_calltable(atom_exec_context *ctx, int *ptr, int arg) else SDEBUG(" table: %d\n", idx); if (U16(ctx->ctx->cmd_table + 4 + 2 * idx)) - atom_execute_table(ctx->ctx, idx, ctx->ps + ctx->ps_shift); + atom_execute_table_locked(ctx->ctx, idx, ctx->ps + ctx->ps_shift); } static void atom_op_clear(atom_exec_context *ctx, int *ptr, int arg) @@ -1040,7 +1041,7 @@ static struct { atom_op_shr, ATOM_ARG_MC}, { atom_op_debug, 0},}; -void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params) +static void atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params) { int base = CU16(ctx->cmd_table + 4 + 2 * index); int len, ws, ps, ptr; @@ -1092,6 +1093,13 @@ void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params) kfree(ectx.ws); } +void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params) +{ + mutex_lock(&ctx->mutex); + atom_execute_table_locked(ctx, index, params); + mutex_unlock(&ctx->mutex); +} + static int atom_iio_len[] = { 1, 2, 3, 3, 3, 3, 4, 4, 4, 3 }; static void atom_index_iio(struct atom_context *ctx, int base) diff --git a/drivers/gpu/drm/radeon/atom.h b/drivers/gpu/drm/radeon/atom.h index 6671848e5ea1..47fd943f6d14 100644 --- a/drivers/gpu/drm/radeon/atom.h +++ b/drivers/gpu/drm/radeon/atom.h @@ -120,6 +120,7 @@ struct card_info { struct atom_context { struct card_info *card; + struct mutex mutex; void *bios; uint32_t cmd_table, data_table; uint16_t *iio; diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 02bcdb1240c0..99b95ca42a71 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -481,6 +481,7 @@ int radeon_atombios_init(struct radeon_device *rdev) atom_card_info->pll_write = cail_pll_write; rdev->mode_info.atom_context = atom_parse(atom_card_info, rdev->bios); + mutex_init(&rdev->mode_info.atom_context->mutex); radeon_atom_initialize_bios_scratch_regs(rdev->ddev); atom_allocate_fb_scratch(rdev->mode_info.atom_context); return 0; -- GitLab From 5ea597f3764880ab3a67fe2246218634a8c12778 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 17 Dec 2009 13:50:09 +0100 Subject: [PATCH 530/618] drm/radeon/kms: enable memory clock reading on legacy (V2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit V2: detect IGP cards (which don't have own memory) Signed-off-by: RafaÅ‚ MiÅ‚ecki Acked-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_asic.h | 7 ++++--- drivers/gpu/drm/radeon/radeon_clocks.c | 2 +- drivers/gpu/drm/radeon/radeon_device.c | 6 ++++++ 3 files changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 636116bedcb4..eb29217bbf1d 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -33,6 +33,7 @@ */ uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev); void radeon_legacy_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock); +uint32_t radeon_legacy_get_memory_clock(struct radeon_device *rdev); void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable); uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev); @@ -106,7 +107,7 @@ static struct radeon_asic r100_asic = { .copy = &r100_copy_blit, .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, - .get_memory_clock = NULL, + .get_memory_clock = &radeon_legacy_get_memory_clock, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -166,7 +167,7 @@ static struct radeon_asic r300_asic = { .copy = &r100_copy_blit, .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, - .get_memory_clock = NULL, + .get_memory_clock = &radeon_legacy_get_memory_clock, .set_memory_clock = NULL, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -259,7 +260,7 @@ static struct radeon_asic rs400_asic = { .copy = &r100_copy_blit, .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, - .get_memory_clock = NULL, + .get_memory_clock = &radeon_legacy_get_memory_clock, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c index b062109efbee..812f24dbc2a8 100644 --- a/drivers/gpu/drm/radeon/radeon_clocks.c +++ b/drivers/gpu/drm/radeon/radeon_clocks.c @@ -62,7 +62,7 @@ uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev) } /* 10 khz */ -static uint32_t radeon_legacy_get_memory_clock(struct radeon_device *rdev) +uint32_t radeon_legacy_get_memory_clock(struct radeon_device *rdev) { struct radeon_pll *mpll = &rdev->clock.mpll; uint32_t fb_div, ref_div, post_div, mclk; diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 99b95ca42a71..14df3ad64f94 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -391,6 +391,12 @@ int radeon_asic_init(struct radeon_device *rdev) /* FIXME: not supported yet */ return -EINVAL; } + + if (rdev->flags & RADEON_IS_IGP) { + rdev->asic->get_memory_clock = NULL; + rdev->asic->set_memory_clock = NULL; + } + return 0; } -- GitLab From 46c64d4bfa01cda7d58c514164f8b127ab6741b7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Thu, 17 Dec 2009 06:02:28 +0100 Subject: [PATCH 531/618] drm/radeon/kms: allow rendering while no colorbuffer is set on r300 Because hardware cannot disable all colorbuffers directly to do depth-only rendering, a user should: - disable reading from a colorbuffer in blending - disable fastfill - set the color channel mask to 0 to prevent writing to a colorbuffer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 4 ++++ drivers/gpu/drm/radeon/r100_track.h | 4 +++- drivers/gpu/drm/radeon/r300.c | 12 ++++++++++++ 3 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 84e5df766d3f..71727460968f 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2881,6 +2881,10 @@ int r100_cs_track_check(struct radeon_device *rdev, struct r100_cs_track *track) for (i = 0; i < track->num_cb; i++) { if (track->cb[i].robj == NULL) { + if (!(track->fastfill || track->color_channel_mask || + track->blend_read_enable)) { + continue; + } DRM_ERROR("[drm] No buffer for color buffer %d !\n", i); return -EINVAL; } diff --git a/drivers/gpu/drm/radeon/r100_track.h b/drivers/gpu/drm/radeon/r100_track.h index 7188c3778ee2..b27a6999d219 100644 --- a/drivers/gpu/drm/radeon/r100_track.h +++ b/drivers/gpu/drm/radeon/r100_track.h @@ -67,13 +67,15 @@ struct r100_cs_track { unsigned immd_dwords; unsigned num_arrays; unsigned max_indx; + unsigned color_channel_mask; struct r100_cs_track_array arrays[11]; struct r100_cs_track_cb cb[R300_MAX_CB]; struct r100_cs_track_cb zb; struct r100_cs_track_texture textures[R300_TRACK_MAX_TEXTURE]; bool z_enabled; bool separate_cube; - + bool fastfill; + bool blend_read_enable; }; int r100_cs_track_check(struct radeon_device *rdev, struct r100_cs_track *track); diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 83490c2b5061..6a5d1177afab 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -992,6 +992,18 @@ static int r300_packet0_check(struct radeon_cs_parser *p, } ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); break; + case 0x4e0c: + /* RB3D_COLOR_CHANNEL_MASK */ + track->color_channel_mask = idx_value; + break; + case 0x4d1c: + /* ZB_BW_CNTL */ + track->fastfill = !!(idx_value & (1 << 2)); + break; + case 0x4e04: + /* RB3D_BLENDCNTL */ + track->blend_read_enable = !!(idx_value & (1 << 2)); + break; case 0x4be8: /* valid register only on RV530 */ if (p->rdev->family == CHIP_RV530) -- GitLab From 512889f450c1851d9e3628f1894b9b64b0701eac Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Sat, 19 Dec 2009 00:23:00 +0100 Subject: [PATCH 532/618] drm/radeon/kms: add 3DC compression support There are 2 formats: ATI1N: 64 bits per 4x4 block, one-channel format ATI2N: 128 bits per 4x4 block, two-channel format Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r300.c | 18 ++++++++++++++++++ drivers/gpu/drm/radeon/r300_reg.h | 1 + 2 files changed, 19 insertions(+) diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 6a5d1177afab..3f2cc9e2e8d9 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -887,6 +887,14 @@ static int r300_packet0_check(struct radeon_cs_parser *p, track->textures[i].cpp = 1; track->textures[i].compress_format = R100_TRACK_COMP_DXT1; break; + case R300_TX_FORMAT_ATI2N: + if (p->rdev->family < CHIP_R420) { + DRM_ERROR("Invalid texture format %u\n", + (idx_value & 0x1F)); + return -EINVAL; + } + /* The same rules apply as for DXT3/5. */ + /* Pass through. */ case R300_TX_FORMAT_DXT3: case R300_TX_FORMAT_DXT5: track->textures[i].cpp = 1; @@ -951,6 +959,16 @@ static int r300_packet0_check(struct radeon_cs_parser *p, track->textures[i].width_11 = tmp; tmp = ((idx_value >> 16) & 1) << 11; track->textures[i].height_11 = tmp; + + /* ATI1N */ + if (idx_value & (1 << 14)) { + /* The same rules apply as for DXT1. */ + track->textures[i].compress_format = + R100_TRACK_COMP_DXT1; + } + } else if (idx_value & (1 << 14)) { + DRM_ERROR("Forbidden bit TXFORMAT_MSB\n"); + return -EINVAL; } break; case 0x4480: diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h index 4b7afef35a65..1735a2b69580 100644 --- a/drivers/gpu/drm/radeon/r300_reg.h +++ b/drivers/gpu/drm/radeon/r300_reg.h @@ -900,6 +900,7 @@ # define R300_TX_FORMAT_FL_I32 0x1B # define R300_TX_FORMAT_FL_I32A32 0x1C # define R300_TX_FORMAT_FL_R32G32B32A32 0x1D +# define R300_TX_FORMAT_ATI2N 0x1F /* alpha modes, convenience mostly */ /* if you have alpha, pick constant appropriate to the number of channels (1 for I8, 2 for I8A8, 4 for R8G8B8A8, etc */ -- GitLab From d2efdf6d6f425950a61fa5cc3aa22e6718e7f3c8 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 22 Dec 2009 10:06:49 -0500 Subject: [PATCH 533/618] drm/radeon/kms: add cvt mode if we only have lvds w/h and no edid (v4) This fixes LVDS on some mac laptops without a panel edid. v2 - Set proper mode type flags v3 - Note that this is not neceesarily the exact panel mode, but an approximation based on the cvt formula. For these systems we should ideally read the mode info out of the registers or add a mode table, but this works and is much simpler. v4 - Update comments and debug message. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 8da06e17ff27..20161567dbff 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -208,6 +208,18 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode drm_mode_set_name(mode); DRM_DEBUG("Adding native panel mode %s\n", mode->name); + } else if (native_mode->hdisplay != 0 && + native_mode->vdisplay != 0) { + /* mac laptops without an edid */ + /* Note that this is not necessarily the exact panel mode, + * but an approximation based on the cvt formula. For these + * systems we should ideally read the mode info out of the + * registers or add a mode table, but this works and is much + * simpler. + */ + mode = drm_cvt_mode(dev, native_mode->hdisplay, native_mode->vdisplay, 60, true, false, false); + mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; + DRM_DEBUG("Adding cvt approximation of native panel mode %s\n", mode->name); } return mode; } -- GitLab From 0a0c7596c643239e8d4c3eaaba43b74a96f2411e Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 11 Dec 2009 20:36:19 +0100 Subject: [PATCH 534/618] drm/radeon/kms: Avoid crash when trying to cleanup uninitialized structure Add boolean to record if some part of the driver are initialized or not this allow to avoid a crash when trying to cleanup uninitialized structure members. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon.h | 4 +++- drivers/gpu/drm/radeon/radeon_fence.c | 9 ++++++--- drivers/gpu/drm/radeon/radeon_ttm.c | 4 ++++ 3 files changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index cd650fd3964e..53b55608102b 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -162,6 +162,7 @@ struct radeon_fence_driver { struct list_head created; struct list_head emited; struct list_head signaled; + bool initialized; }; struct radeon_fence { @@ -202,8 +203,9 @@ struct radeon_surface_reg { struct radeon_mman { struct ttm_bo_global_ref bo_global_ref; struct ttm_global_reference mem_global_ref; - bool mem_global_referenced; struct ttm_bo_device bdev; + bool mem_global_referenced; + bool initialized; }; struct radeon_bo { diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index cb4cd97ae39f..4cdd8b4f7549 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -324,7 +324,7 @@ int radeon_fence_driver_init(struct radeon_device *rdev) write_lock_irqsave(&rdev->fence_drv.lock, irq_flags); r = radeon_scratch_get(rdev, &rdev->fence_drv.scratch_reg); if (r) { - DRM_ERROR("Fence failed to get a scratch register."); + dev_err(rdev->dev, "fence failed to get scratch register\n"); write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags); return r; } @@ -335,9 +335,10 @@ int radeon_fence_driver_init(struct radeon_device *rdev) INIT_LIST_HEAD(&rdev->fence_drv.signaled); rdev->fence_drv.count_timeout = 0; init_waitqueue_head(&rdev->fence_drv.queue); + rdev->fence_drv.initialized = true; write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags); if (radeon_debugfs_fence_init(rdev)) { - DRM_ERROR("Failed to register debugfs file for fence !\n"); + dev_err(rdev->dev, "fence debugfs file creation failed\n"); } return 0; } @@ -346,11 +347,13 @@ void radeon_fence_driver_fini(struct radeon_device *rdev) { unsigned long irq_flags; + if (!rdev->fence_drv.initialized) + return; wake_up_all(&rdev->fence_drv.queue); write_lock_irqsave(&rdev->fence_drv.lock, irq_flags); radeon_scratch_free(rdev, rdev->fence_drv.scratch_reg); write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags); - DRM_INFO("radeon: fence finalized\n"); + rdev->fence_drv.initialized = false; } diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 7bed4122528c..a00450743d60 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -494,6 +494,7 @@ int radeon_ttm_init(struct radeon_device *rdev) DRM_ERROR("failed initializing buffer object driver(%d).\n", r); return r; } + rdev->mman.initialized = true; r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_VRAM, rdev->mc.real_vram_size >> PAGE_SHIFT); if (r) { @@ -541,6 +542,8 @@ void radeon_ttm_fini(struct radeon_device *rdev) { int r; + if (!rdev->mman.initialized) + return; if (rdev->stollen_vga_memory) { r = radeon_bo_reserve(rdev->stollen_vga_memory, false); if (r == 0) { @@ -554,6 +557,7 @@ void radeon_ttm_fini(struct radeon_device *rdev) ttm_bo_device_release(&rdev->mman.bdev); radeon_gart_fini(rdev); radeon_ttm_global_fini(rdev); + rdev->mman.initialized = false; DRM_INFO("radeon: ttm finalized\n"); } -- GitLab From 3642133816f9f25065e3ca310f0720574bcdcc52 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 11 Dec 2009 21:18:34 +0100 Subject: [PATCH 535/618] drm/radeon/kms: Check module arguments to be valid V2 This patch add a function which check module argument to be valid. On invalid argument it prints a warning and setback the default value. V2: Allow 0 for vram limit & agp mode which are the default value Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 73 ++++++++++++++++++++++++-- 1 file changed, 68 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 14df3ad64f94..7c6848096bcd 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -546,9 +546,72 @@ void radeon_agp_disable(struct radeon_device *rdev) } } -/* - * Radeon device. - */ +void radeon_check_arguments(struct radeon_device *rdev) +{ + /* vramlimit must be a power of two */ + switch (radeon_vram_limit) { + case 0: + case 4: + case 8: + case 16: + case 32: + case 64: + case 128: + case 256: + case 512: + case 1024: + case 2048: + case 4096: + break; + default: + dev_warn(rdev->dev, "vram limit (%d) must be a power of 2\n", + radeon_vram_limit); + radeon_vram_limit = 0; + break; + } + radeon_vram_limit = radeon_vram_limit << 20; + /* gtt size must be power of two and greater or equal to 32M */ + switch (radeon_gart_size) { + case 4: + case 8: + case 16: + dev_warn(rdev->dev, "gart size (%d) too small forcing to 512M\n", + radeon_gart_size); + radeon_gart_size = 512; + break; + case 32: + case 64: + case 128: + case 256: + case 512: + case 1024: + case 2048: + case 4096: + break; + default: + dev_warn(rdev->dev, "gart size (%d) must be a power of 2\n", + radeon_gart_size); + radeon_gart_size = 512; + break; + } + rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; + /* AGP mode can only be -1, 1, 2, 4, 8 */ + switch (radeon_agpmode) { + case -1: + case 0: + case 1: + case 2: + case 4: + case 8: + break; + default: + dev_warn(rdev->dev, "invalid AGP mode %d (valid mode: " + "-1, 0, 1, 2, 4, 8)\n", radeon_agpmode); + radeon_agpmode = 0; + break; + } +} + int radeon_device_init(struct radeon_device *rdev, struct drm_device *ddev, struct pci_dev *pdev, @@ -587,9 +650,9 @@ int radeon_device_init(struct radeon_device *rdev, /* Set asic functions */ r = radeon_asic_init(rdev); - if (r) { + if (r) return r; - } + radeon_check_arguments(rdev); if (rdev->flags & RADEON_IS_AGP && radeon_agpmode == -1) { radeon_agp_disable(rdev); -- GitLab From f56cd64f5f713a3013c4d980a5695c198d839671 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 18 Dec 2009 11:28:22 -0500 Subject: [PATCH 536/618] drm/radeon/kms: never combine LVDS with another encoder When linking multiple encoders to a connector, make sure to not link LVDS with another connector. Some bioses have the same i2c line for LVDS and VGA. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 49 +++++++++++------------- 1 file changed, 23 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index b5912c26b1db..321044bef71c 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -745,8 +745,7 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct else radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, - (1 << - i), + (1 << i), dac), (1 << i)); } @@ -758,32 +757,30 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct if (bios_connectors[j].valid && (i != j)) { if (bios_connectors[i].line_mux == bios_connectors[j].line_mux) { - if (((bios_connectors[i]. - devices & - (ATOM_DEVICE_DFP_SUPPORT)) - && (bios_connectors[j]. - devices & - (ATOM_DEVICE_CRT_SUPPORT))) - || - ((bios_connectors[j]. - devices & - (ATOM_DEVICE_DFP_SUPPORT)) - && (bios_connectors[i]. - devices & - (ATOM_DEVICE_CRT_SUPPORT)))) { - bios_connectors[i]. - devices |= - bios_connectors[j]. - devices; - bios_connectors[i]. - connector_type = - DRM_MODE_CONNECTOR_DVII; - if (bios_connectors[j].devices & - (ATOM_DEVICE_DFP_SUPPORT)) + /* make sure not to combine LVDS */ + if (bios_connectors[i].devices & (ATOM_DEVICE_LCD_SUPPORT)) { + bios_connectors[i].line_mux = 53; + bios_connectors[i].ddc_bus.valid = false; + continue; + } + if (bios_connectors[j].devices & (ATOM_DEVICE_LCD_SUPPORT)) { + bios_connectors[j].line_mux = 53; + bios_connectors[j].ddc_bus.valid = false; + continue; + } + /* combine analog and digital for DVI-I */ + if (((bios_connectors[i].devices & (ATOM_DEVICE_DFP_SUPPORT)) && + (bios_connectors[j].devices & (ATOM_DEVICE_CRT_SUPPORT))) || + ((bios_connectors[j].devices & (ATOM_DEVICE_DFP_SUPPORT)) && + (bios_connectors[i].devices & (ATOM_DEVICE_CRT_SUPPORT)))) { + bios_connectors[i].devices |= + bios_connectors[j].devices; + bios_connectors[i].connector_type = + DRM_MODE_CONNECTOR_DVII; + if (bios_connectors[j].devices & (ATOM_DEVICE_DFP_SUPPORT)) bios_connectors[i].hpd = bios_connectors[j].hpd; - bios_connectors[j]. - valid = false; + bios_connectors[j].valid = false; } } } -- GitLab From 0786201d8cd0730e72b0e087484dd47cc5f58409 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Sat, 19 Dec 2009 12:45:12 -0500 Subject: [PATCH 537/618] drm/radeon/kms: add definitions for v4 power tables [airlied: just adding this for completeness to avoid drift between public atombios.h files] Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios.h | 199 ++++++++++++++++++++++++++++++ 1 file changed, 199 insertions(+) diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index e83927644de4..8e28842080df 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -4690,6 +4690,205 @@ typedef struct _ATOM_POWERPLAY_INFO_V3 { ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; } ATOM_POWERPLAY_INFO_V3; +/* New PPlib */ +/**************************************************************************/ +typedef struct _ATOM_PPLIB_THERMALCONTROLLER + +{ + UCHAR ucType; // one of ATOM_PP_THERMALCONTROLLER_* + UCHAR ucI2cLine; // as interpreted by DAL I2C + UCHAR ucI2cAddress; + UCHAR ucFanParameters; // Fan Control Parameters. + UCHAR ucFanMinRPM; // Fan Minimum RPM (hundreds) -- for display purposes only. + UCHAR ucFanMaxRPM; // Fan Maximum RPM (hundreds) -- for display purposes only. + UCHAR ucReserved; // ---- + UCHAR ucFlags; // to be defined +} ATOM_PPLIB_THERMALCONTROLLER; + +#define ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK 0x0f +#define ATOM_PP_FANPARAMETERS_NOFAN 0x80 // No fan is connected to this controller. + +#define ATOM_PP_THERMALCONTROLLER_NONE 0 +#define ATOM_PP_THERMALCONTROLLER_LM63 1 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_ADM1032 2 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_ADM1030 3 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_MUA6649 4 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_LM64 5 +#define ATOM_PP_THERMALCONTROLLER_F75375 6 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_RV6xx 7 +#define ATOM_PP_THERMALCONTROLLER_RV770 8 +#define ATOM_PP_THERMALCONTROLLER_ADT7473 9 + +typedef struct _ATOM_PPLIB_STATE +{ + UCHAR ucNonClockStateIndex; + UCHAR ucClockStateIndices[1]; // variable-sized +} ATOM_PPLIB_STATE; + +//// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps +#define ATOM_PP_PLATFORM_CAP_BACKBIAS 1 +#define ATOM_PP_PLATFORM_CAP_POWERPLAY 2 +#define ATOM_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 4 +#define ATOM_PP_PLATFORM_CAP_ASPM_L0s 8 +#define ATOM_PP_PLATFORM_CAP_ASPM_L1 16 +#define ATOM_PP_PLATFORM_CAP_HARDWAREDC 32 +#define ATOM_PP_PLATFORM_CAP_GEMINIPRIMARY 64 +#define ATOM_PP_PLATFORM_CAP_STEPVDDC 128 +#define ATOM_PP_PLATFORM_CAP_VOLTAGECONTROL 256 +#define ATOM_PP_PLATFORM_CAP_SIDEPORTCONTROL 512 +#define ATOM_PP_PLATFORM_CAP_TURNOFFPLL_ASPML1 1024 +#define ATOM_PP_PLATFORM_CAP_HTLINKCONTROL 2048 + +typedef struct _ATOM_PPLIB_POWERPLAYTABLE +{ + ATOM_COMMON_TABLE_HEADER sHeader; + + UCHAR ucDataRevision; + + UCHAR ucNumStates; + UCHAR ucStateEntrySize; + UCHAR ucClockInfoSize; + UCHAR ucNonClockSize; + + // offset from start of this table to array of ucNumStates ATOM_PPLIB_STATE structures + USHORT usStateArrayOffset; + + // offset from start of this table to array of ASIC-specific structures, + // currently ATOM_PPLIB_CLOCK_INFO. + USHORT usClockInfoArrayOffset; + + // offset from start of this table to array of ATOM_PPLIB_NONCLOCK_INFO + USHORT usNonClockInfoArrayOffset; + + USHORT usBackbiasTime; // in microseconds + USHORT usVoltageTime; // in microseconds + USHORT usTableSize; //the size of this structure, or the extended structure + + ULONG ulPlatformCaps; // See ATOM_PPLIB_CAPS_* + + ATOM_PPLIB_THERMALCONTROLLER sThermalController; + + USHORT usBootClockInfoOffset; + USHORT usBootNonClockInfoOffset; + +} ATOM_PPLIB_POWERPLAYTABLE; + +//// ATOM_PPLIB_NONCLOCK_INFO::usClassification +#define ATOM_PPLIB_CLASSIFICATION_UI_MASK 0x0007 +#define ATOM_PPLIB_CLASSIFICATION_UI_SHIFT 0 +#define ATOM_PPLIB_CLASSIFICATION_UI_NONE 0 +#define ATOM_PPLIB_CLASSIFICATION_UI_BATTERY 1 +#define ATOM_PPLIB_CLASSIFICATION_UI_BALANCED 3 +#define ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE 5 +// 2, 4, 6, 7 are reserved + +#define ATOM_PPLIB_CLASSIFICATION_BOOT 0x0008 +#define ATOM_PPLIB_CLASSIFICATION_THERMAL 0x0010 +#define ATOM_PPLIB_CLASSIFICATION_LIMITEDPOWERSOURCE 0x0020 +#define ATOM_PPLIB_CLASSIFICATION_REST 0x0040 +#define ATOM_PPLIB_CLASSIFICATION_FORCED 0x0080 +#define ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE 0x0100 +#define ATOM_PPLIB_CLASSIFICATION_OVERDRIVETEMPLATE 0x0200 +#define ATOM_PPLIB_CLASSIFICATION_UVDSTATE 0x0400 +#define ATOM_PPLIB_CLASSIFICATION_3DLOW 0x0800 +#define ATOM_PPLIB_CLASSIFICATION_ACPI 0x1000 +// remaining 3 bits are reserved + +//// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings +#define ATOM_PPLIB_SINGLE_DISPLAY_ONLY 0x00000001 +#define ATOM_PPLIB_SUPPORTS_VIDEO_PLAYBACK 0x00000002 + +// 0 is 2.5Gb/s, 1 is 5Gb/s +#define ATOM_PPLIB_PCIE_LINK_SPEED_MASK 0x00000004 +#define ATOM_PPLIB_PCIE_LINK_SPEED_SHIFT 2 + +// lanes - 1: 1, 2, 4, 8, 12, 16 permitted by PCIE spec +#define ATOM_PPLIB_PCIE_LINK_WIDTH_MASK 0x000000F8 +#define ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT 3 + +// lookup into reduced refresh-rate table +#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_MASK 0x00000F00 +#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_SHIFT 8 + +#define ATOM_PPLIB_LIMITED_REFRESHRATE_UNLIMITED 0 +#define ATOM_PPLIB_LIMITED_REFRESHRATE_50HZ 1 +// 2-15 TBD as needed. + +#define ATOM_PPLIB_SOFTWARE_DISABLE_LOADBALANCING 0x00001000 +#define ATOM_PPLIB_SOFTWARE_ENABLE_SLEEP_FOR_TIMESTAMPS 0x00002000 +#define ATOM_PPLIB_ENABLE_VARIBRIGHT 0x00008000 + +#define ATOM_PPLIB_DISALLOW_ON_DC 0x00004000 + +// Contained in an array starting at the offset +// in ATOM_PPLIB_POWERPLAYTABLE::usNonClockInfoArrayOffset. +// referenced from ATOM_PPLIB_STATE_INFO::ucNonClockStateIndex +typedef struct _ATOM_PPLIB_NONCLOCK_INFO +{ + USHORT usClassification; + UCHAR ucMinTemperature; + UCHAR ucMaxTemperature; + ULONG ulCapsAndSettings; + UCHAR ucRequiredPower; + UCHAR ucUnused1[3]; +} ATOM_PPLIB_NONCLOCK_INFO; + +// Contained in an array starting at the offset +// in ATOM_PPLIB_POWERPLAYTABLE::usClockInfoArrayOffset. +// referenced from ATOM_PPLIB_STATE::ucClockStateIndices +typedef struct _ATOM_PPLIB_R600_CLOCK_INFO +{ + USHORT usEngineClockLow; + UCHAR ucEngineClockHigh; + + USHORT usMemoryClockLow; + UCHAR ucMemoryClockHigh; + + USHORT usVDDC; + USHORT usUnused1; + USHORT usUnused2; + + ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_* + +} ATOM_PPLIB_R600_CLOCK_INFO; + +// ulFlags in ATOM_PPLIB_R600_CLOCK_INFO +#define ATOM_PPLIB_R600_FLAGS_PCIEGEN2 1 +#define ATOM_PPLIB_R600_FLAGS_UVDSAFE 2 +#define ATOM_PPLIB_R600_FLAGS_BACKBIASENABLE 4 +#define ATOM_PPLIB_R600_FLAGS_MEMORY_ODT_OFF 8 +#define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF 16 + +typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO + +{ + USHORT usLowEngineClockLow; // Low Engine clock in MHz (the same way as on the R600). + UCHAR ucLowEngineClockHigh; + USHORT usHighEngineClockLow; // High Engine clock in MHz. + UCHAR ucHighEngineClockHigh; + USHORT usMemoryClockLow; // For now one of the ATOM_PPLIB_RS780_SPMCLK_XXXX constants. + UCHAR ucMemoryClockHigh; // Currentyl unused. + UCHAR ucPadding; // For proper alignment and size. + USHORT usVDDC; // For the 780, use: None, Low, High, Variable + UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16} + UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requriement. + USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200). + ULONG ulFlags; +} ATOM_PPLIB_RS780_CLOCK_INFO; + +#define ATOM_PPLIB_RS780_VOLTAGE_NONE 0 +#define ATOM_PPLIB_RS780_VOLTAGE_LOW 1 +#define ATOM_PPLIB_RS780_VOLTAGE_HIGH 2 +#define ATOM_PPLIB_RS780_VOLTAGE_VARIABLE 3 + +#define ATOM_PPLIB_RS780_SPMCLK_NONE 0 // We cannot change the side port memory clock, leave it as it is. +#define ATOM_PPLIB_RS780_SPMCLK_LOW 1 +#define ATOM_PPLIB_RS780_SPMCLK_HIGH 2 + +#define ATOM_PPLIB_RS780_HTLINKFREQ_NONE 0 +#define ATOM_PPLIB_RS780_HTLINKFREQ_LOW 1 +#define ATOM_PPLIB_RS780_HTLINKFREQ_HIGH 2 + /**************************************************************************/ /* Following definitions are for compatiblity issue in different SW components. */ -- GitLab From f62faedbed546f4e0c1ba204999e7c206059f305 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 23 Dec 2009 09:27:51 +0100 Subject: [PATCH 538/618] ALSA: hda - Set mixer name after codec patch Postpone the mixer name setup after the codec patch since the codec patch may change the codec name string in itself. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 9cfdb771928c..950ee5cfcacf 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1086,11 +1086,6 @@ int snd_hda_codec_configure(struct hda_codec *codec) if (err < 0) return err; } - /* audio codec should override the mixer name */ - if (codec->afg || !*codec->bus->card->mixername) - snprintf(codec->bus->card->mixername, - sizeof(codec->bus->card->mixername), - "%s %s", codec->vendor_name, codec->chip_name); if (is_generic_config(codec)) { err = snd_hda_parse_generic_codec(codec); @@ -1109,6 +1104,11 @@ int snd_hda_codec_configure(struct hda_codec *codec) patched: if (!err && codec->patch_ops.unsol_event) err = init_unsol_queue(codec->bus); + /* audio codec should override the mixer name */ + if (!err && (codec->afg || !*codec->bus->card->mixername)) + snprintf(codec->bus->card->mixername, + sizeof(codec->bus->card->mixername), + "%s %s", codec->vendor_name, codec->chip_name); return err; } EXPORT_SYMBOL_HDA(snd_hda_codec_configure); -- GitLab From 0c69774e6ce94364cfaa8bdeb18061edc414bc5a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 22 Dec 2009 15:43:19 +0100 Subject: [PATCH 539/618] sched: Revert 738d2be, simplify set_task_cpu() Effectively reverts 738d2be4301007f054541c5c4bf7fb6a361c9b3a. As demonstrated by Eric, we really need to call __set_task_cpu() early in the fork() path to properly initialize the various task state -- specifically the cgroup state through set_task_rq(). [ we could probably fix this by explicitly calling __set_task_cpu() from sched_fork(), but lets try that for the next cycle and simply revert to the old behaviour for now. ] Reported-by: Eric Paris Tested-by: Eric Paris , Signed-off-by: Peter Zijlstra Cc: efault@gmx.de LKML-Reference: <1261492999.4937.36.camel@laptop> Signed-off-by: Ingo Molnar --- kernel/sched.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 87f1f47beffe..c535cc4f6428 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2045,11 +2045,10 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu) trace_sched_migrate_task(p, new_cpu); - if (task_cpu(p) == new_cpu) - return; - - p->se.nr_migrations++; - perf_sw_event(PERF_COUNT_SW_CPU_MIGRATIONS, 1, 1, NULL, 0); + if (task_cpu(p) != new_cpu) { + p->se.nr_migrations++; + perf_sw_event(PERF_COUNT_SW_CPU_MIGRATIONS, 1, 1, NULL, 0); + } __set_task_cpu(p, new_cpu); } -- GitLab From c459001fa4f71deafb62e00fa70d35f695498965 Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Wed, 9 Dec 2009 03:05:30 +0300 Subject: [PATCH 540/618] ext3: quota macros cleanup [V2] Currently all quota block reservation macros contains hardcoded "2" aka MAXQUOTAS value. This is no good because in some places it is not obvious to understand what does this digit represent. Let's introduce new macro with self descriptive name. Signed-off-by: Dmitry Monakhov Signed-off-by: Jan Kara --- fs/ext3/inode.c | 8 ++++---- fs/ext3/namei.c | 8 ++++---- include/linux/ext3_jbd.h | 7 +++++-- 3 files changed, 13 insertions(+), 10 deletions(-) diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index ad14227f509e..455e6e6e5cb9 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -970,7 +970,7 @@ static int ext3_get_block(struct inode *inode, sector_t iblock, if (max_blocks > DIO_MAX_BLOCKS) max_blocks = DIO_MAX_BLOCKS; handle = ext3_journal_start(inode, DIO_CREDITS + - 2 * EXT3_QUOTA_TRANS_BLOCKS(inode->i_sb)); + EXT3_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb)); if (IS_ERR(handle)) { ret = PTR_ERR(handle); goto out; @@ -3146,8 +3146,8 @@ int ext3_setattr(struct dentry *dentry, struct iattr *attr) /* (user+group)*(old+new) structure, inode write (sb, * inode block, ? - but truncate inode update has it) */ - handle = ext3_journal_start(inode, 2*(EXT3_QUOTA_INIT_BLOCKS(inode->i_sb)+ - EXT3_QUOTA_DEL_BLOCKS(inode->i_sb))+3); + handle = ext3_journal_start(inode, EXT3_MAXQUOTAS_INIT_BLOCKS(inode->i_sb)+ + EXT3_MAXQUOTAS_DEL_BLOCKS(inode->i_sb)+3); if (IS_ERR(handle)) { error = PTR_ERR(handle); goto err_out; @@ -3239,7 +3239,7 @@ static int ext3_writepage_trans_blocks(struct inode *inode) #ifdef CONFIG_QUOTA /* We know that structure was already allocated during vfs_dq_init so * we will be updating only the data blocks + inodes */ - ret += 2*EXT3_QUOTA_TRANS_BLOCKS(inode->i_sb); + ret += EXT3_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb); #endif return ret; diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index aad6400c9b77..81f7348b2de3 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -1699,7 +1699,7 @@ static int ext3_create (struct inode * dir, struct dentry * dentry, int mode, retry: handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - 2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb)); + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); if (IS_ERR(handle)) return PTR_ERR(handle); @@ -1733,7 +1733,7 @@ static int ext3_mknod (struct inode * dir, struct dentry *dentry, retry: handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - 2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb)); + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); if (IS_ERR(handle)) return PTR_ERR(handle); @@ -1769,7 +1769,7 @@ static int ext3_mkdir(struct inode * dir, struct dentry * dentry, int mode) retry: handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - 2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb)); + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); if (IS_ERR(handle)) return PTR_ERR(handle); @@ -2175,7 +2175,7 @@ static int ext3_symlink (struct inode * dir, retry: handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + EXT3_INDEX_EXTRA_TRANS_BLOCKS + 5 + - 2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb)); + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); if (IS_ERR(handle)) return PTR_ERR(handle); diff --git a/include/linux/ext3_jbd.h b/include/linux/ext3_jbd.h index cf82d519be40..d7b5ddca99c2 100644 --- a/include/linux/ext3_jbd.h +++ b/include/linux/ext3_jbd.h @@ -44,13 +44,13 @@ #define EXT3_DATA_TRANS_BLOCKS(sb) (EXT3_SINGLEDATA_TRANS_BLOCKS + \ EXT3_XATTR_TRANS_BLOCKS - 2 + \ - 2*EXT3_QUOTA_TRANS_BLOCKS(sb)) + EXT3_MAXQUOTAS_TRANS_BLOCKS(sb)) /* Delete operations potentially hit one directory's namespace plus an * entire inode, plus arbitrary amounts of bitmap/indirection data. Be * generous. We can grow the delete transaction later if necessary. */ -#define EXT3_DELETE_TRANS_BLOCKS(sb) (2 * EXT3_DATA_TRANS_BLOCKS(sb) + 64) +#define EXT3_DELETE_TRANS_BLOCKS(sb) (EXT3_MAXQUOTAS_TRANS_BLOCKS(sb) + 64) /* Define an arbitrary limit for the amount of data we will anticipate * writing to any given transaction. For unbounded transactions such as @@ -86,6 +86,9 @@ #define EXT3_QUOTA_INIT_BLOCKS(sb) 0 #define EXT3_QUOTA_DEL_BLOCKS(sb) 0 #endif +#define EXT3_MAXQUOTAS_TRANS_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_TRANS_BLOCKS(sb)) +#define EXT3_MAXQUOTAS_INIT_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_INIT_BLOCKS(sb)) +#define EXT3_MAXQUOTAS_DEL_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_DEL_BLOCKS(sb)) int ext3_mark_iloc_dirty(handle_t *handle, -- GitLab From b462707e7ccad058ae151e5c5b06eb5cadcb737f Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Mon, 14 Dec 2009 15:21:12 +0300 Subject: [PATCH 541/618] Add unlocked version of inode_add_bytes() function Quota code requires unlocked version of this function. Off course we can just copy-paste the code, but copy-pasting is always an evil. Signed-off-by: Dmitry Monakhov Signed-off-by: Jan Kara --- fs/stat.c | 10 ++++++++-- include/linux/fs.h | 1 + 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/stat.c b/fs/stat.c index 075694e31d8b..c4ecd52c5737 100644 --- a/fs/stat.c +++ b/fs/stat.c @@ -401,9 +401,9 @@ SYSCALL_DEFINE4(fstatat64, int, dfd, char __user *, filename, } #endif /* __ARCH_WANT_STAT64 */ -void inode_add_bytes(struct inode *inode, loff_t bytes) +/* Caller is here responsible for sufficient locking (ie. inode->i_lock) */ +void __inode_add_bytes(struct inode *inode, loff_t bytes) { - spin_lock(&inode->i_lock); inode->i_blocks += bytes >> 9; bytes &= 511; inode->i_bytes += bytes; @@ -411,6 +411,12 @@ void inode_add_bytes(struct inode *inode, loff_t bytes) inode->i_blocks++; inode->i_bytes -= 512; } +} + +void inode_add_bytes(struct inode *inode, loff_t bytes) +{ + spin_lock(&inode->i_lock); + __inode_add_bytes(inode, bytes); spin_unlock(&inode->i_lock); } diff --git a/include/linux/fs.h b/include/linux/fs.h index 7e3012e0ac06..9147ca88f253 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2297,6 +2297,7 @@ extern const struct inode_operations page_symlink_inode_operations; extern int generic_readlink(struct dentry *, char __user *, int); extern void generic_fillattr(struct inode *, struct kstat *); extern int vfs_getattr(struct vfsmount *, struct dentry *, struct kstat *); +void __inode_add_bytes(struct inode *inode, loff_t bytes); void inode_add_bytes(struct inode *inode, loff_t bytes); void inode_sub_bytes(struct inode *inode, loff_t bytes); loff_t inode_get_bytes(struct inode *inode); -- GitLab From fd8fbfc1709822bd94247c5b2ab15a5f5041e103 Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Mon, 14 Dec 2009 15:21:13 +0300 Subject: [PATCH 542/618] quota: decouple fs reserved space from quota reservation Currently inode_reservation is managed by fs itself and this reservation is transfered on dquot_transfer(). This means what inode_reservation must always be in sync with dquot->dq_dqb.dqb_rsvspace. Otherwise dquot_transfer() will result in incorrect quota(WARN_ON in dquot_claim_reserved_space() will be triggered) This is not easy because of complex locking order issues for example http://bugzilla.kernel.org/show_bug.cgi?id=14739 The patch introduce quota reservation field for each fs-inode (fs specific inode is used in order to prevent bloating generic vfs inode). This reservation is managed by quota code internally similar to i_blocks/i_bytes and may not be always in sync with internal fs reservation. Also perform some code rearrangement: - Unify dquot_reserve_space() and dquot_reserve_space() - Unify dquot_release_reserved_space() and dquot_free_space() - Also this patch add missing warning update to release_rsv() dquot_release_reserved_space() must call flush_warnings() as dquot_free_space() does. Signed-off-by: Dmitry Monakhov Signed-off-by: Jan Kara --- fs/quota/dquot.c | 213 +++++++++++++++++++++++------------------- include/linux/quota.h | 5 +- 2 files changed, 122 insertions(+), 96 deletions(-) diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index cd6bb9a33c13..1cb8fa84300f 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -1318,6 +1318,67 @@ void vfs_dq_drop(struct inode *inode) } EXPORT_SYMBOL(vfs_dq_drop); +/* + * inode_reserved_space is managed internally by quota, and protected by + * i_lock similar to i_blocks+i_bytes. + */ +static qsize_t *inode_reserved_space(struct inode * inode) +{ + /* Filesystem must explicitly define it's own method in order to use + * quota reservation interface */ + BUG_ON(!inode->i_sb->dq_op->get_reserved_space); + return inode->i_sb->dq_op->get_reserved_space(inode); +} + +static void inode_add_rsv_space(struct inode *inode, qsize_t number) +{ + spin_lock(&inode->i_lock); + *inode_reserved_space(inode) += number; + spin_unlock(&inode->i_lock); +} + + +static void inode_claim_rsv_space(struct inode *inode, qsize_t number) +{ + spin_lock(&inode->i_lock); + *inode_reserved_space(inode) -= number; + __inode_add_bytes(inode, number); + spin_unlock(&inode->i_lock); +} + +static void inode_sub_rsv_space(struct inode *inode, qsize_t number) +{ + spin_lock(&inode->i_lock); + *inode_reserved_space(inode) -= number; + spin_unlock(&inode->i_lock); +} + +static qsize_t inode_get_rsv_space(struct inode *inode) +{ + qsize_t ret; + spin_lock(&inode->i_lock); + ret = *inode_reserved_space(inode); + spin_unlock(&inode->i_lock); + return ret; +} + +static void inode_incr_space(struct inode *inode, qsize_t number, + int reserve) +{ + if (reserve) + inode_add_rsv_space(inode, number); + else + inode_add_bytes(inode, number); +} + +static void inode_decr_space(struct inode *inode, qsize_t number, int reserve) +{ + if (reserve) + inode_sub_rsv_space(inode, number); + else + inode_sub_bytes(inode, number); +} + /* * Following four functions update i_blocks+i_bytes fields and * quota information (together with appropriate checks) @@ -1336,6 +1397,21 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int cnt, ret = QUOTA_OK; char warntype[MAXQUOTAS]; + /* + * First test before acquiring mutex - solves deadlocks when we + * re-enter the quota code and are already holding the mutex + */ + if (IS_NOQUOTA(inode)) { + inode_incr_space(inode, number, reserve); + goto out; + } + + down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); + if (IS_NOQUOTA(inode)) { + inode_incr_space(inode, number, reserve); + goto out_unlock; + } + for (cnt = 0; cnt < MAXQUOTAS; cnt++) warntype[cnt] = QUOTA_NL_NOWARN; @@ -1346,7 +1422,8 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, if (check_bdq(inode->i_dquot[cnt], number, warn, warntype+cnt) == NO_QUOTA) { ret = NO_QUOTA; - goto out_unlock; + spin_unlock(&dq_data_lock); + goto out_flush_warn; } } for (cnt = 0; cnt < MAXQUOTAS; cnt++) { @@ -1357,64 +1434,32 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, else dquot_incr_space(inode->i_dquot[cnt], number); } - if (!reserve) - inode_add_bytes(inode, number); -out_unlock: + inode_incr_space(inode, number, reserve); spin_unlock(&dq_data_lock); - flush_warnings(inode->i_dquot, warntype); - return ret; -} - -int dquot_alloc_space(struct inode *inode, qsize_t number, int warn) -{ - int cnt, ret = QUOTA_OK; - - /* - * First test before acquiring mutex - solves deadlocks when we - * re-enter the quota code and are already holding the mutex - */ - if (IS_NOQUOTA(inode)) { - inode_add_bytes(inode, number); - goto out; - } - - down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); - if (IS_NOQUOTA(inode)) { - inode_add_bytes(inode, number); - goto out_unlock; - } - - ret = __dquot_alloc_space(inode, number, warn, 0); - if (ret == NO_QUOTA) - goto out_unlock; + if (reserve) + goto out_flush_warn; /* Dirtify all the dquots - this can block when journalling */ for (cnt = 0; cnt < MAXQUOTAS; cnt++) if (inode->i_dquot[cnt]) mark_dquot_dirty(inode->i_dquot[cnt]); +out_flush_warn: + flush_warnings(inode->i_dquot, warntype); out_unlock: up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); out: return ret; } + +int dquot_alloc_space(struct inode *inode, qsize_t number, int warn) +{ + return __dquot_alloc_space(inode, number, warn, 0); +} EXPORT_SYMBOL(dquot_alloc_space); int dquot_reserve_space(struct inode *inode, qsize_t number, int warn) { - int ret = QUOTA_OK; - - if (IS_NOQUOTA(inode)) - goto out; - - down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); - if (IS_NOQUOTA(inode)) - goto out_unlock; - - ret = __dquot_alloc_space(inode, number, warn, 1); -out_unlock: - up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); -out: - return ret; + return __dquot_alloc_space(inode, number, warn, 1); } EXPORT_SYMBOL(dquot_reserve_space); @@ -1471,14 +1516,14 @@ int dquot_claim_space(struct inode *inode, qsize_t number) int ret = QUOTA_OK; if (IS_NOQUOTA(inode)) { - inode_add_bytes(inode, number); + inode_claim_rsv_space(inode, number); goto out; } down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); if (IS_NOQUOTA(inode)) { up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); - inode_add_bytes(inode, number); + inode_claim_rsv_space(inode, number); goto out; } @@ -1490,7 +1535,7 @@ int dquot_claim_space(struct inode *inode, qsize_t number) number); } /* Update inode bytes */ - inode_add_bytes(inode, number); + inode_claim_rsv_space(inode, number); spin_unlock(&dq_data_lock); /* Dirtify all the dquots - this can block when journalling */ for (cnt = 0; cnt < MAXQUOTAS; cnt++) @@ -1502,39 +1547,10 @@ int dquot_claim_space(struct inode *inode, qsize_t number) } EXPORT_SYMBOL(dquot_claim_space); -/* - * Release reserved quota space - */ -void dquot_release_reserved_space(struct inode *inode, qsize_t number) -{ - int cnt; - - if (IS_NOQUOTA(inode)) - goto out; - - down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); - if (IS_NOQUOTA(inode)) - goto out_unlock; - - spin_lock(&dq_data_lock); - /* Release reserved dquots */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (inode->i_dquot[cnt]) - dquot_free_reserved_space(inode->i_dquot[cnt], number); - } - spin_unlock(&dq_data_lock); - -out_unlock: - up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); -out: - return; -} -EXPORT_SYMBOL(dquot_release_reserved_space); - /* * This operation can block, but only after everything is updated */ -int dquot_free_space(struct inode *inode, qsize_t number) +int __dquot_free_space(struct inode *inode, qsize_t number, int reserve) { unsigned int cnt; char warntype[MAXQUOTAS]; @@ -1543,7 +1559,7 @@ int dquot_free_space(struct inode *inode, qsize_t number) * re-enter the quota code and are already holding the mutex */ if (IS_NOQUOTA(inode)) { out_sub: - inode_sub_bytes(inode, number); + inode_decr_space(inode, number, reserve); return QUOTA_OK; } @@ -1558,20 +1574,42 @@ int dquot_free_space(struct inode *inode, qsize_t number) if (!inode->i_dquot[cnt]) continue; warntype[cnt] = info_bdq_free(inode->i_dquot[cnt], number); - dquot_decr_space(inode->i_dquot[cnt], number); + if (reserve) + dquot_free_reserved_space(inode->i_dquot[cnt], number); + else + dquot_decr_space(inode->i_dquot[cnt], number); } - inode_sub_bytes(inode, number); + inode_decr_space(inode, number, reserve); spin_unlock(&dq_data_lock); + + if (reserve) + goto out_unlock; /* Dirtify all the dquots - this can block when journalling */ for (cnt = 0; cnt < MAXQUOTAS; cnt++) if (inode->i_dquot[cnt]) mark_dquot_dirty(inode->i_dquot[cnt]); +out_unlock: flush_warnings(inode->i_dquot, warntype); up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); return QUOTA_OK; } + +int dquot_free_space(struct inode *inode, qsize_t number) +{ + return __dquot_free_space(inode, number, 0); +} EXPORT_SYMBOL(dquot_free_space); +/* + * Release reserved quota space + */ +void dquot_release_reserved_space(struct inode *inode, qsize_t number) +{ + __dquot_free_space(inode, number, 1); + +} +EXPORT_SYMBOL(dquot_release_reserved_space); + /* * This operation can block, but only after everything is updated */ @@ -1609,19 +1647,6 @@ int dquot_free_inode(const struct inode *inode, qsize_t number) } EXPORT_SYMBOL(dquot_free_inode); -/* - * call back function, get reserved quota space from underlying fs - */ -qsize_t dquot_get_reserved_space(struct inode *inode) -{ - qsize_t reserved_space = 0; - - if (sb_any_quota_active(inode->i_sb) && - inode->i_sb->dq_op->get_reserved_space) - reserved_space = inode->i_sb->dq_op->get_reserved_space(inode); - return reserved_space; -} - /* * Transfer the number of inode and blocks from one diskquota to an other. * @@ -1665,7 +1690,7 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) } spin_lock(&dq_data_lock); cur_space = inode_get_bytes(inode); - rsv_space = dquot_get_reserved_space(inode); + rsv_space = inode_get_rsv_space(inode); space = cur_space + rsv_space; /* Build the transfer_from list and check the limits */ for (cnt = 0; cnt < MAXQUOTAS; cnt++) { diff --git a/include/linux/quota.h b/include/linux/quota.h index e70e62194243..a6861f117480 100644 --- a/include/linux/quota.h +++ b/include/linux/quota.h @@ -315,8 +315,9 @@ struct dquot_operations { int (*claim_space) (struct inode *, qsize_t); /* release rsved quota for delayed alloc */ void (*release_rsv) (struct inode *, qsize_t); - /* get reserved quota for delayed alloc */ - qsize_t (*get_reserved_space) (struct inode *); + /* get reserved quota for delayed alloc, value returned is managed by + * quota code only */ + qsize_t *(*get_reserved_space) (struct inode *); }; /* Operations handling requests from userspace */ -- GitLab From a9e7f4472075fb6937c545af3f6329e9946bbe66 Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Mon, 14 Dec 2009 15:21:14 +0300 Subject: [PATCH 543/618] ext4: Convert to generic reserved quota's space management. This patch also fixes write vs chown race condition. Acked-by: "Theodore Ts'o" Signed-off-by: Dmitry Monakhov Signed-off-by: Jan Kara --- fs/ext4/ext4.h | 6 +++++- fs/ext4/inode.c | 16 +++++++--------- fs/ext4/super.c | 5 +++++ 3 files changed, 17 insertions(+), 10 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index ab31e65d46d0..56f9271ee8cc 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -704,6 +704,10 @@ struct ext4_inode_info { __u16 i_extra_isize; spinlock_t i_block_reservation_lock; +#ifdef CONFIG_QUOTA + /* quota space reservation, managed internally by quota code */ + qsize_t i_reserved_quota; +#endif /* completed async DIOs that might need unwritten extents handling */ struct list_head i_aio_dio_complete_list; @@ -1435,7 +1439,7 @@ extern int ext4_chunk_trans_blocks(struct inode *, int nrblocks); extern int ext4_block_truncate_page(handle_t *handle, struct address_space *mapping, loff_t from); extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf); -extern qsize_t ext4_get_reserved_space(struct inode *inode); +extern qsize_t *ext4_get_reserved_space(struct inode *inode); extern int flush_aio_dio_completed_IO(struct inode *inode); /* ioctl.c */ extern long ext4_ioctl(struct file *, unsigned int, unsigned long); diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 5352db1a3086..a31980dd9b86 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1003,17 +1003,12 @@ static int ext4_ind_get_blocks(handle_t *handle, struct inode *inode, return err; } -qsize_t ext4_get_reserved_space(struct inode *inode) +#ifdef CONFIG_QUOTA +qsize_t *ext4_get_reserved_space(struct inode *inode) { - unsigned long long total; - - spin_lock(&EXT4_I(inode)->i_block_reservation_lock); - total = EXT4_I(inode)->i_reserved_data_blocks + - EXT4_I(inode)->i_reserved_meta_blocks; - spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); - - return (total << inode->i_blkbits); + return &EXT4_I(inode)->i_reserved_quota; } +#endif /* * Calculate the number of metadata blocks need to reserve * to allocate @blocks for non extent file based file @@ -4794,6 +4789,9 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino) ((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32; inode->i_size = ext4_isize(raw_inode); ei->i_disksize = inode->i_size; +#ifdef CONFIG_QUOTA + ei->i_reserved_quota = 0; +#endif inode->i_generation = le32_to_cpu(raw_inode->i_generation); ei->i_block_group = iloc.block_group; ei->i_last_alloc_group = ~0; diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 827bde1f2594..6ed9aa91f27d 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -704,6 +704,9 @@ static struct inode *ext4_alloc_inode(struct super_block *sb) ei->i_allocated_meta_blocks = 0; ei->i_delalloc_reserved_flag = 0; spin_lock_init(&(ei->i_block_reservation_lock)); +#ifdef CONFIG_QUOTA + ei->i_reserved_quota = 0; +#endif INIT_LIST_HEAD(&ei->i_aio_dio_complete_list); ei->cur_aio_dio = NULL; ei->i_sync_tid = 0; @@ -1014,7 +1017,9 @@ static const struct dquot_operations ext4_quota_operations = { .reserve_space = dquot_reserve_space, .claim_space = dquot_claim_space, .release_rsv = dquot_release_reserved_space, +#ifdef CONFIG_QUOTA .get_reserved_space = ext4_get_reserved_space, +#endif .alloc_inode = dquot_alloc_inode, .free_space = dquot_free_space, .free_inode = dquot_free_inode, -- GitLab From dc52dd3a3a800e70b3440ea4424f8c87ab043e42 Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Mon, 14 Dec 2009 15:21:15 +0300 Subject: [PATCH 544/618] quota: Move duplicated code to separate functions - for(..) { mark_dquot_dirty(); } -> mark_all_dquot_dirty() - for(..) { dput(); } -> dqput_all() Signed-off-by: Dmitry Monakhov Signed-off-by: Jan Kara --- fs/quota/dquot.c | 77 ++++++++++++++++++++++++------------------------ 1 file changed, 38 insertions(+), 39 deletions(-) diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index 1cb8fa84300f..dea86abdf2e7 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -323,6 +323,30 @@ int dquot_mark_dquot_dirty(struct dquot *dquot) } EXPORT_SYMBOL(dquot_mark_dquot_dirty); +/* Dirtify all the dquots - this can block when journalling */ +static inline int mark_all_dquot_dirty(struct dquot * const *dquot) +{ + int ret, err, cnt; + + ret = err = 0; + for (cnt = 0; cnt < MAXQUOTAS; cnt++) { + if (dquot[cnt]) + /* Even in case of error we have to continue */ + ret = mark_dquot_dirty(dquot[cnt]); + if (!err) + err = ret; + } + return err; +} + +static inline void dqput_all(struct dquot **dquot) +{ + unsigned int cnt; + + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + dqput(dquot[cnt]); +} + /* This function needs dq_list_lock */ static inline int clear_dquot_dirty(struct dquot *dquot) { @@ -1268,8 +1292,7 @@ int dquot_initialize(struct inode *inode, int type) out_err: up_write(&sb_dqopt(sb)->dqptr_sem); /* Drop unused references */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - dqput(got[cnt]); + dqput_all(got); return ret; } EXPORT_SYMBOL(dquot_initialize); @@ -1288,9 +1311,7 @@ int dquot_drop(struct inode *inode) inode->i_dquot[cnt] = NULL; } up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - dqput(put[cnt]); + dqput_all(put); return 0; } EXPORT_SYMBOL(dquot_drop); @@ -1439,10 +1460,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, if (reserve) goto out_flush_warn; - /* Dirtify all the dquots - this can block when journalling */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (inode->i_dquot[cnt]) - mark_dquot_dirty(inode->i_dquot[cnt]); + mark_all_dquot_dirty(inode->i_dquot); out_flush_warn: flush_warnings(inode->i_dquot, warntype); out_unlock: @@ -1500,10 +1518,7 @@ int dquot_alloc_inode(const struct inode *inode, qsize_t number) warn_put_all: spin_unlock(&dq_data_lock); if (ret == QUOTA_OK) - /* Dirtify all the dquots - this can block when journalling */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (inode->i_dquot[cnt]) - mark_dquot_dirty(inode->i_dquot[cnt]); + mark_all_dquot_dirty(inode->i_dquot); flush_warnings(inode->i_dquot, warntype); up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); return ret; @@ -1537,10 +1552,7 @@ int dquot_claim_space(struct inode *inode, qsize_t number) /* Update inode bytes */ inode_claim_rsv_space(inode, number); spin_unlock(&dq_data_lock); - /* Dirtify all the dquots - this can block when journalling */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (inode->i_dquot[cnt]) - mark_dquot_dirty(inode->i_dquot[cnt]); + mark_all_dquot_dirty(inode->i_dquot); up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); out: return ret; @@ -1584,10 +1596,7 @@ int __dquot_free_space(struct inode *inode, qsize_t number, int reserve) if (reserve) goto out_unlock; - /* Dirtify all the dquots - this can block when journalling */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (inode->i_dquot[cnt]) - mark_dquot_dirty(inode->i_dquot[cnt]); + mark_all_dquot_dirty(inode->i_dquot); out_unlock: flush_warnings(inode->i_dquot, warntype); up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); @@ -1637,10 +1646,7 @@ int dquot_free_inode(const struct inode *inode, qsize_t number) dquot_decr_inodes(inode->i_dquot[cnt], number); } spin_unlock(&dq_data_lock); - /* Dirtify all the dquots - this can block when journalling */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (inode->i_dquot[cnt]) - mark_dquot_dirty(inode->i_dquot[cnt]); + mark_all_dquot_dirty(inode->i_dquot); flush_warnings(inode->i_dquot, warntype); up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); return QUOTA_OK; @@ -1734,25 +1740,18 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) spin_unlock(&dq_data_lock); up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - /* Dirtify all the dquots - this can block when journalling */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (transfer_from[cnt]) - mark_dquot_dirty(transfer_from[cnt]); - if (transfer_to[cnt]) { - mark_dquot_dirty(transfer_to[cnt]); - /* The reference we got is transferred to the inode */ - transfer_to[cnt] = NULL; - } - } + mark_all_dquot_dirty(transfer_from); + mark_all_dquot_dirty(transfer_to); + /* The reference we got is transferred to the inode */ + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + transfer_to[cnt] = NULL; warn_put_all: flush_warnings(transfer_to, warntype_to); flush_warnings(transfer_from, warntype_from_inodes); flush_warnings(transfer_from, warntype_from_space); put_all: - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - dqput(transfer_from[cnt]); - dqput(transfer_to[cnt]); - } + dqput_all(transfer_from); + dqput_all(transfer_to); return ret; over_quota: spin_unlock(&dq_data_lock); -- GitLab From ed505ee454dbf133b1a4067d3ac0325d4261eda1 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 14 Dec 2009 12:59:18 -0600 Subject: [PATCH 545/618] ext3: Remove outdated comment about lock_super() ext3_fill_super() is no longer called by read_super(), and it is no longer called with the superblock locked. The unlock_super()/lock_super() is no longer present, so this comment is entirely superfluous. Port of ext4 commit 32ed5058ce90024efcd811254b4b1de0468099df by Theodore Ts'o . CC: Theodore Ts'o Signed-off-by: Eric Sandeen Signed-off-by: Jan Kara --- fs/ext3/super.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 7ad1e8c30bd0..8ad566b845ae 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2014,14 +2014,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent) } ext3_setup_super (sb, es, sb->s_flags & MS_RDONLY); - /* - * akpm: core read_super() calls in here with the superblock locked. - * That deadlocks, because orphan cleanup needs to lock the superblock - * in numerous places. Here we just pop the lock - it's relatively - * harmless, because we are now ready to accept write_super() requests, - * and aviro says that's the only reason for hanging onto the - * superblock lock. - */ + EXT3_SB(sb)->s_mount_state |= EXT3_ORPHAN_FS; ext3_orphan_cleanup(sb, es); EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS; -- GitLab From 4854a5f0cbb1967fc7db3ea861d97afeea78b88b Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 14 Dec 2009 12:59:59 -0600 Subject: [PATCH 546/618] ext3: ext3_mark_recovery_complete() doesn't need to use lock_super The function ext3_mark_recovery_complete() is called from two call paths: either (a) while mounting the filesystem, in which case there's no danger of any other CPU calling write_super() until the mount is completed, and (b) while remounting the filesystem read-write, in which case the fs core has already locked the superblock. This also allows us to take out a very vile unlock_super()/lock_super() pair in ext3_remount(). Port of ext4 commit a63c9eb2ce6f5028da90f282798232c4f398ceb8 by Theodore Ts'o . CC: Theodore Ts'o Signed-off-by: Eric Sandeen Signed-off-by: Jan Kara --- fs/ext3/super.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 8ad566b845ae..806b8b780add 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2396,13 +2396,11 @@ static void ext3_mark_recovery_complete(struct super_block * sb, if (journal_flush(journal) < 0) goto out; - lock_super(sb); if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) && sb->s_flags & MS_RDONLY) { EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); ext3_commit_super(sb, es, 1); } - unlock_super(sb); out: journal_unlock_updates(journal); @@ -2594,13 +2592,7 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data) (sbi->s_mount_state & EXT3_VALID_FS)) es->s_state = cpu_to_le16(sbi->s_mount_state); - /* - * We have to unlock super so that we can wait for - * transactions. - */ - unlock_super(sb); ext3_mark_recovery_complete(sb, es); - lock_super(sb); } else { __le32 ret; if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb, -- GitLab From b8a052d01669977f224255b0f9f2737018171ddb Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 14 Dec 2009 13:00:30 -0600 Subject: [PATCH 547/618] ext3: Replace lock/unlock_super() with an explicit lock for the orphan list Use a separate lock to protect the orphan list, so we can stop overloading the use of lock_super(). Port of ext4 commit 3b9d4ed26680771295d904a6b83e88e620780893 by Theodore Ts'o . CC: Theodore Ts'o Signed-off-by: Eric Sandeen Signed-off-by: Jan Kara --- fs/ext3/namei.c | 20 +++++++++++--------- fs/ext3/super.c | 1 + include/linux/ext3_fs_sb.h | 1 + 3 files changed, 13 insertions(+), 9 deletions(-) diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 81f7348b2de3..7b0e44f7d66f 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -1920,7 +1920,7 @@ int ext3_orphan_add(handle_t *handle, struct inode *inode) struct ext3_iloc iloc; int err = 0, rc; - lock_super(sb); + mutex_lock(&EXT3_SB(sb)->s_orphan_lock); if (!list_empty(&EXT3_I(inode)->i_orphan)) goto out_unlock; @@ -1929,9 +1929,13 @@ int ext3_orphan_add(handle_t *handle, struct inode *inode) /* @@@ FIXME: Observation from aviro: * I think I can trigger J_ASSERT in ext3_orphan_add(). We block - * here (on lock_super()), so race with ext3_link() which might bump + * here (on s_orphan_lock), so race with ext3_link() which might bump * ->i_nlink. For, say it, character device. Not a regular file, * not a directory, not a symlink and ->i_nlink > 0. + * + * tytso, 4/25/2009: I'm not sure how that could happen; + * shouldn't the fs core protect us from these sort of + * unlink()/link() races? */ J_ASSERT ((S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) || inode->i_nlink == 0); @@ -1968,7 +1972,7 @@ int ext3_orphan_add(handle_t *handle, struct inode *inode) jbd_debug(4, "orphan inode %lu will point to %d\n", inode->i_ino, NEXT_ORPHAN(inode)); out_unlock: - unlock_super(sb); + mutex_unlock(&EXT3_SB(sb)->s_orphan_lock); ext3_std_error(inode->i_sb, err); return err; } @@ -1986,11 +1990,9 @@ int ext3_orphan_del(handle_t *handle, struct inode *inode) struct ext3_iloc iloc; int err = 0; - lock_super(inode->i_sb); - if (list_empty(&ei->i_orphan)) { - unlock_super(inode->i_sb); - return 0; - } + mutex_lock(&EXT3_SB(inode->i_sb)->s_orphan_lock); + if (list_empty(&ei->i_orphan)) + goto out; ino_next = NEXT_ORPHAN(inode); prev = ei->i_orphan.prev; @@ -2040,7 +2042,7 @@ int ext3_orphan_del(handle_t *handle, struct inode *inode) out_err: ext3_std_error(inode->i_sb, err); out: - unlock_super(inode->i_sb); + mutex_unlock(&EXT3_SB(inode->i_sb)->s_orphan_lock); return err; out_brelse: diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 806b8b780add..97dd3828384c 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -1928,6 +1928,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent) sb->dq_op = &ext3_quota_operations; #endif INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */ + mutex_init(&sbi->s_orphan_lock); sb->s_root = NULL; diff --git a/include/linux/ext3_fs_sb.h b/include/linux/ext3_fs_sb.h index f07f34de2f0e..dd61d83026a0 100644 --- a/include/linux/ext3_fs_sb.h +++ b/include/linux/ext3_fs_sb.h @@ -72,6 +72,7 @@ struct ext3_sb_info { struct inode * s_journal_inode; struct journal_s * s_journal; struct list_head s_orphan; + struct mutex s_orphan_lock; unsigned long s_commit_interval; struct block_device *journal_bdev; #ifdef CONFIG_JBD_DEBUG -- GitLab From 96d2a495c25d525873529b736cdb63ad502b101c Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 14 Dec 2009 13:01:05 -0600 Subject: [PATCH 548/618] ext3: Replace lock/unlock_super() with an explicit lock for resizing Use a separate lock to protect s_groups_count and the other block group descriptors which get changed via an on-line resize operation, so we can stop overloading the use of lock_super(). Port of ext4 commit 32ed5058ce90024efcd811254b4b1de0468099df by Theodore Ts'o . CC: Theodore Ts'o Signed-off-by: Eric Sandeen Signed-off-by: Jan Kara --- fs/ext3/resize.c | 35 ++++++++++++++++++----------------- fs/ext3/super.c | 1 + include/linux/ext3_fs_sb.h | 1 + 3 files changed, 20 insertions(+), 17 deletions(-) diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c index 5f83b6179178..54351ac7cef9 100644 --- a/fs/ext3/resize.c +++ b/fs/ext3/resize.c @@ -209,7 +209,7 @@ static int setup_new_group_blocks(struct super_block *sb, if (IS_ERR(handle)) return PTR_ERR(handle); - lock_super(sb); + mutex_lock(&sbi->s_resize_lock); if (input->group != sbi->s_groups_count) { err = -EBUSY; goto exit_journal; @@ -324,7 +324,7 @@ static int setup_new_group_blocks(struct super_block *sb, brelse(bh); exit_journal: - unlock_super(sb); + mutex_unlock(&sbi->s_resize_lock); if ((err2 = ext3_journal_stop(handle)) && !err) err = err2; @@ -662,11 +662,12 @@ static int reserve_backup_gdb(handle_t *handle, struct inode *inode, * important part is that the new block and inode counts are in the backup * superblocks, and the location of the new group metadata in the GDT backups. * - * We do not need lock_super() for this, because these blocks are not - * otherwise touched by the filesystem code when it is mounted. We don't - * need to worry about last changing from sbi->s_groups_count, because the - * worst that can happen is that we do not copy the full number of backups - * at this time. The resize which changed s_groups_count will backup again. + * We do not need take the s_resize_lock for this, because these + * blocks are not otherwise touched by the filesystem code when it is + * mounted. We don't need to worry about last changing from + * sbi->s_groups_count, because the worst that can happen is that we + * do not copy the full number of backups at this time. The resize + * which changed s_groups_count will backup again. */ static void update_backups(struct super_block *sb, int blk_off, char *data, int size) @@ -825,7 +826,7 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input) goto exit_put; } - lock_super(sb); + mutex_lock(&sbi->s_resize_lock); if (input->group != sbi->s_groups_count) { ext3_warning(sb, __func__, "multiple resizers run on filesystem!"); @@ -856,7 +857,7 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input) /* * OK, now we've set up the new group. Time to make it active. * - * Current kernels don't lock all allocations via lock_super(), + * We do not lock all allocations via s_resize_lock * so we have to be safe wrt. concurrent accesses the group * data. So we need to be careful to set all of the relevant * group descriptor data etc. *before* we enable the group. @@ -900,12 +901,12 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input) * * The precise rules we use are: * - * * Writers of s_groups_count *must* hold lock_super + * * Writers of s_groups_count *must* hold s_resize_lock * AND * * Writers must perform a smp_wmb() after updating all dependent * data and before modifying the groups count * - * * Readers must hold lock_super() over the access + * * Readers must hold s_resize_lock over the access * OR * * Readers must perform an smp_rmb() after reading the groups count * and before reading any dependent data. @@ -936,7 +937,7 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input) ext3_journal_dirty_metadata(handle, sbi->s_sbh); exit_journal: - unlock_super(sb); + mutex_unlock(&sbi->s_resize_lock); if ((err2 = ext3_journal_stop(handle)) && !err) err = err2; if (!err) { @@ -973,7 +974,7 @@ int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es, /* We don't need to worry about locking wrt other resizers just * yet: we're going to revalidate es->s_blocks_count after - * taking lock_super() below. */ + * taking the s_resize_lock below. */ o_blocks_count = le32_to_cpu(es->s_blocks_count); o_groups_count = EXT3_SB(sb)->s_groups_count; @@ -1045,11 +1046,11 @@ int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es, goto exit_put; } - lock_super(sb); + mutex_lock(&EXT3_SB(sb)->s_resize_lock); if (o_blocks_count != le32_to_cpu(es->s_blocks_count)) { ext3_warning(sb, __func__, "multiple resizers run on filesystem!"); - unlock_super(sb); + mutex_unlock(&EXT3_SB(sb)->s_resize_lock); ext3_journal_stop(handle); err = -EBUSY; goto exit_put; @@ -1059,13 +1060,13 @@ int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es, EXT3_SB(sb)->s_sbh))) { ext3_warning(sb, __func__, "error %d on journal write access", err); - unlock_super(sb); + mutex_unlock(&EXT3_SB(sb)->s_resize_lock); ext3_journal_stop(handle); goto exit_put; } es->s_blocks_count = cpu_to_le32(o_blocks_count + add); ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh); - unlock_super(sb); + mutex_unlock(&EXT3_SB(sb)->s_resize_lock); ext3_debug("freeing blocks %lu through "E3FSBLK"\n", o_blocks_count, o_blocks_count + add); ext3_free_blocks_sb(handle, sb, o_blocks_count, add, &freed_blocks); diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 97dd3828384c..afa2b569da10 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -1929,6 +1929,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent) #endif INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */ mutex_init(&sbi->s_orphan_lock); + mutex_init(&sbi->s_resize_lock); sb->s_root = NULL; diff --git a/include/linux/ext3_fs_sb.h b/include/linux/ext3_fs_sb.h index dd61d83026a0..258088ab3c6b 100644 --- a/include/linux/ext3_fs_sb.h +++ b/include/linux/ext3_fs_sb.h @@ -73,6 +73,7 @@ struct ext3_sb_info { struct journal_s * s_journal; struct list_head s_orphan; struct mutex s_orphan_lock; + struct mutex s_resize_lock; unsigned long s_commit_interval; struct block_device *journal_bdev; #ifdef CONFIG_JBD_DEBUG -- GitLab From 82fdfa928cfa19d9627526b2ce164a27f8e9d34b Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 15 Dec 2009 22:24:36 +0100 Subject: [PATCH 549/618] quota: Fix 64-bit limits setting on 32-bit archs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix warnings: fs/quota/quota_v2.c: In function ‘v2_read_file_info’: fs/quota/quota_v2.c:123: warning: integer constant is too large for ‘long’ type fs/quota/quota_v2.c:124: warning: integer constant is too large for ‘long’ type Reported-by: Jerry Leo Signed-off-by: Jan Kara --- fs/quota/quota_v2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/quota/quota_v2.c b/fs/quota/quota_v2.c index 3dfc23e02135..669855cf9b61 100644 --- a/fs/quota/quota_v2.c +++ b/fs/quota/quota_v2.c @@ -120,8 +120,8 @@ static int v2_read_file_info(struct super_block *sb, int type) info->dqi_maxilimit = 0xffffffff; } else { /* used space is stored as unsigned 64-bit value */ - info->dqi_maxblimit = 0xffffffffffffffff; /* 2^64-1 */ - info->dqi_maxilimit = 0xffffffffffffffff; + info->dqi_maxblimit = 0xffffffffffffffffULL; /* 2^64-1 */ + info->dqi_maxilimit = 0xffffffffffffffffULL; } info->dqi_bgrace = le32_to_cpu(dinfo.dqi_bgrace); info->dqi_igrace = le32_to_cpu(dinfo.dqi_igrace); -- GitLab From d21cd8f163ac44b15c465aab7306db931c606908 Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Thu, 10 Dec 2009 03:31:45 +0000 Subject: [PATCH 550/618] ext4: Fix potential quota deadlock We have to delay vfs_dq_claim_space() until allocation context destruction. Currently we have following call-trace: ext4_mb_new_blocks() /* task is already holding ac->alloc_semp */ ->ext4_mb_mark_diskspace_used ->vfs_dq_claim_space() /* acquire dqptr_sem here. Possible deadlock */ ->ext4_mb_release_context() /* drop ac->alloc_semp here */ Let's move quota claiming to ext4_da_update_reserve_space() ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-rc7 #18 ------------------------------------------------------- write-truncate-/3465 is trying to acquire lock: (&s->s_dquot.dqptr_sem){++++..}, at: [] dquot_claim_space+0x3b/0x1b0 but task is already holding lock: (&meta_group_info[i]->alloc_sem){++++..}, at: [] ext4_mb_load_buddy+0xb2/0x370 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&meta_group_info[i]->alloc_sem){++++..}: [] __lock_acquire+0xd7b/0x1260 [] lock_acquire+0xba/0xd0 [] down_read+0x51/0x90 [] ext4_mb_load_buddy+0xb2/0x370 [] ext4_mb_free_blocks+0x46c/0x870 [] ext4_free_blocks+0x73/0x130 [] ext4_ext_truncate+0x76c/0x8d0 [] ext4_truncate+0x187/0x5e0 [] vmtruncate+0x6b/0x70 [] inode_setattr+0x62/0x190 [] ext4_setattr+0x25a/0x370 [] notify_change+0x151/0x340 [] do_truncate+0x6d/0xa0 [] may_open+0x1d4/0x200 [] do_filp_open+0x1eb/0x910 [] do_sys_open+0x6d/0x140 [] sys_open+0x2e/0x40 [] sysenter_do_call+0x12/0x32 -> #2 (&ei->i_data_sem){++++..}: [] __lock_acquire+0xd7b/0x1260 [] lock_acquire+0xba/0xd0 [] down_read+0x51/0x90 [] ext4_get_blocks+0x47/0x450 [] ext4_getblk+0x61/0x1d0 [] ext4_bread+0x1f/0xa0 [] ext4_quota_write+0x12c/0x310 [] qtree_write_dquot+0x93/0x120 [] v2_write_dquot+0x28/0x30 [] dquot_commit+0xab/0xf0 [] ext4_write_dquot+0x77/0x90 [] ext4_mark_dquot_dirty+0x2f/0x50 [] dquot_alloc_inode+0x101/0x180 [] ext4_new_inode+0x602/0xf00 [] ext4_create+0x89/0x150 [] vfs_create+0xa2/0xc0 [] do_filp_open+0x7a7/0x910 [] do_sys_open+0x6d/0x140 [] sys_open+0x2e/0x40 [] sysenter_do_call+0x12/0x32 -> #1 (&sb->s_type->i_mutex_key#7/4){+.+...}: [] __lock_acquire+0xd7b/0x1260 [] lock_acquire+0xba/0xd0 [] mutex_lock_nested+0x65/0x2d0 [] vfs_load_quota_inode+0x4bd/0x5a0 [] vfs_quota_on_path+0x5f/0x70 [] ext4_quota_on+0x112/0x190 [] sys_quotactl+0x44a/0x8a0 [] sysenter_do_call+0x12/0x32 -> #0 (&s->s_dquot.dqptr_sem){++++..}: [] __lock_acquire+0x1091/0x1260 [] lock_acquire+0xba/0xd0 [] down_read+0x51/0x90 [] dquot_claim_space+0x3b/0x1b0 [] ext4_mb_mark_diskspace_used+0x36f/0x380 [] ext4_mb_new_blocks+0x34a/0x530 [] ext4_ext_get_blocks+0x122b/0x13c0 [] ext4_get_blocks+0x226/0x450 [] mpage_da_map_blocks+0xc3/0xaa0 [] ext4_da_writepages+0x506/0x790 [] do_writepages+0x22/0x50 [] __filemap_fdatawrite_range+0x6d/0x80 [] filemap_flush+0x2b/0x30 [] ext4_alloc_da_blocks+0x5c/0x60 [] ext4_release_file+0x75/0xb0 [] __fput+0xf9/0x210 [] fput+0x27/0x30 [] filp_close+0x4c/0x80 [] put_files_struct+0x6e/0xd0 [] exit_files+0x47/0x60 [] do_exit+0x144/0x710 [] do_group_exit+0x38/0xa0 [] get_signal_to_deliver+0x2ac/0x410 [] do_notify_resume+0xb9/0x890 [] work_notifysig+0x13/0x21 other info that might help us debug this: 3 locks held by write-truncate-/3465: #0: (jbd2_handle){+.+...}, at: [] start_this_handle+0x38f/0x5c0 #1: (&ei->i_data_sem){++++..}, at: [] ext4_get_blocks+0xb6/0x450 #2: (&meta_group_info[i]->alloc_sem){++++..}, at: [] ext4_mb_load_buddy+0xb2/0x370 stack backtrace: Pid: 3465, comm: write-truncate- Not tainted 2.6.32-rc7 #18 Call Trace: [] ? printk+0x1d/0x22 [] print_circular_bug+0xca/0xd0 [] __lock_acquire+0x1091/0x1260 [] ? sched_clock_local+0xd2/0x170 [] ? trace_hardirqs_off_caller+0x20/0xd0 [] lock_acquire+0xba/0xd0 [] ? dquot_claim_space+0x3b/0x1b0 [] down_read+0x51/0x90 [] ? dquot_claim_space+0x3b/0x1b0 [] dquot_claim_space+0x3b/0x1b0 [] ext4_mb_mark_diskspace_used+0x36f/0x380 [] ext4_mb_new_blocks+0x34a/0x530 [] ? ext4_ext_find_extent+0x25d/0x280 [] ext4_ext_get_blocks+0x122b/0x13c0 [] ? sched_clock_local+0xd2/0x170 [] ? sched_clock_cpu+0x120/0x160 [] ? cpu_clock+0x4f/0x60 [] ? trace_hardirqs_off_caller+0x20/0xd0 [] ? down_write+0x8c/0xa0 [] ext4_get_blocks+0x226/0x450 [] ? sched_clock_cpu+0x120/0x160 [] ? cpu_clock+0x4f/0x60 [] ? trace_hardirqs_off+0xb/0x10 [] mpage_da_map_blocks+0xc3/0xaa0 [] ? find_get_pages_tag+0x16c/0x180 [] ? find_get_pages_tag+0x0/0x180 [] ? __mpage_da_writepage+0x16d/0x1a0 [] ? pagevec_lookup_tag+0x2e/0x40 [] ? write_cache_pages+0xdb/0x3d0 [] ? __mpage_da_writepage+0x0/0x1a0 [] ext4_da_writepages+0x506/0x790 [] ? cpu_clock+0x4f/0x60 [] ? sched_clock_local+0xd2/0x170 [] ? sched_clock_cpu+0x120/0x160 [] ? sched_clock_cpu+0x120/0x160 [] ? ext4_da_writepages+0x0/0x790 [] do_writepages+0x22/0x50 [] __filemap_fdatawrite_range+0x6d/0x80 [] filemap_flush+0x2b/0x30 [] ext4_alloc_da_blocks+0x5c/0x60 [] ext4_release_file+0x75/0xb0 [] __fput+0xf9/0x210 [] fput+0x27/0x30 [] filp_close+0x4c/0x80 [] put_files_struct+0x6e/0xd0 [] exit_files+0x47/0x60 [] do_exit+0x144/0x710 [] ? lock_release_holdtime+0x33/0x210 [] ? _spin_unlock_irq+0x27/0x30 [] do_group_exit+0x38/0xa0 [] ? trace_hardirqs_on+0xb/0x10 [] get_signal_to_deliver+0x2ac/0x410 [] do_notify_resume+0xb9/0x890 [] ? trace_hardirqs_off_caller+0x20/0xd0 [] ? lock_release_holdtime+0x33/0x210 [] ? autoremove_wake_function+0x0/0x50 [] ? trace_hardirqs_on_caller+0x134/0x190 [] ? trace_hardirqs_on+0xb/0x10 [] ? security_file_permission+0x14/0x20 [] ? vfs_write+0x131/0x190 [] ? do_sync_write+0x0/0x120 [] ? sysenter_do_call+0x27/0x32 [] work_notifysig+0x13/0x21 CC: Theodore Ts'o Signed-off-by: Dmitry Monakhov Signed-off-by: Jan Kara --- fs/ext4/inode.c | 9 +++++++-- fs/ext4/mballoc.c | 6 ------ 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a31980dd9b86..ddd0a9c87d9e 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1046,7 +1046,7 @@ static int ext4_calc_metadata_amount(struct inode *inode, int blocks) static void ext4_da_update_reserve_space(struct inode *inode, int used) { struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); - int total, mdb, mdb_free; + int total, mdb, mdb_free, mdb_claim = 0; spin_lock(&EXT4_I(inode)->i_block_reservation_lock); /* recalculate the number of metablocks still need to be reserved */ @@ -1059,7 +1059,9 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used) if (mdb_free) { /* Account for allocated meta_blocks */ - mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks; + mdb_claim = EXT4_I(inode)->i_allocated_meta_blocks; + BUG_ON(mdb_free < mdb_claim); + mdb_free -= mdb_claim; /* update fs dirty blocks counter */ percpu_counter_sub(&sbi->s_dirtyblocks_counter, mdb_free); @@ -1070,8 +1072,11 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used) /* update per-inode reservations */ BUG_ON(used > EXT4_I(inode)->i_reserved_data_blocks); EXT4_I(inode)->i_reserved_data_blocks -= used; + percpu_counter_sub(&sbi->s_dirtyblocks_counter, used + mdb_claim); spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); + vfs_dq_claim_block(inode, used + mdb_claim); + /* * free those over-booking quota for metadata blocks */ diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index b1fd3daadc9c..d34afad3e137 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2755,12 +2755,6 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac, if (!(ac->ac_flags & EXT4_MB_DELALLOC_RESERVED)) /* release all the reserved blocks if non delalloc */ percpu_counter_sub(&sbi->s_dirtyblocks_counter, reserv_blks); - else { - percpu_counter_sub(&sbi->s_dirtyblocks_counter, - ac->ac_b_ex.fe_len); - /* convert reserved quota blocks to real quota blocks */ - vfs_dq_claim_block(ac->ac_inode, ac->ac_b_ex.fe_len); - } if (sbi->s_log_groups_per_flex) { ext4_group_t flex_group = ext4_flex_group(sbi, -- GitLab From 39bc680a8160bb9d6743f7873b535d553ff61058 Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Thu, 10 Dec 2009 16:36:27 +0000 Subject: [PATCH 551/618] ext4: fix sleep inside spinlock issue with quota and dealloc (#14739) Unlock i_block_reservation_lock before vfs_dq_reserve_block(). This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=14739 CC: Theodore Ts'o Signed-off-by: Dmitry Monakhov Signed-off-by: Jan Kara --- fs/ext4/inode.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index ddd0a9c87d9e..ab807963a614 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1816,19 +1816,17 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks) md_needed = mdblocks - EXT4_I(inode)->i_reserved_meta_blocks; total = md_needed + nrblocks; + spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); /* * Make quota reservation here to prevent quota overflow * later. Real quota accounting is done at pages writeout * time. */ - if (vfs_dq_reserve_block(inode, total)) { - spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); + if (vfs_dq_reserve_block(inode, total)) return -EDQUOT; - } if (ext4_claim_free_blocks(sbi, total)) { - spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); vfs_dq_release_reservation_block(inode, total); if (ext4_should_retry_alloc(inode->i_sb, &retries)) { yield(); @@ -1836,10 +1834,11 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks) } return -ENOSPC; } + spin_lock(&EXT4_I(inode)->i_block_reservation_lock); EXT4_I(inode)->i_reserved_data_blocks += nrblocks; - EXT4_I(inode)->i_reserved_meta_blocks = mdblocks; - + EXT4_I(inode)->i_reserved_meta_blocks += md_needed; spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); + return 0; /* success */ } -- GitLab From 765f8361902d015c864d5e62019b2f139452d7ef Mon Sep 17 00:00:00 2001 From: Yin Kangkai Date: Tue, 15 Dec 2009 14:48:25 -0800 Subject: [PATCH 552/618] jbd: jbd-debug and jbd2-debug should be writable jbd-debug and jbd2-debug is currently read-only (S_IRUGO), which is not correct. Make it writable so that we can start debuging. Signed-off-by: Yin Kangkai Reviewed-by: Aneesh Kumar K.V Signed-off-by: Andrew Morton Signed-off-by: Jan Kara --- fs/jbd/journal.c | 2 +- fs/jbd2/journal.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 4160afad6d00..bd224eec9b07 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -1913,7 +1913,7 @@ static void __init jbd_create_debugfs_entry(void) { jbd_debugfs_dir = debugfs_create_dir("jbd", NULL); if (jbd_debugfs_dir) - jbd_debug = debugfs_create_u8("jbd-debug", S_IRUGO, + jbd_debug = debugfs_create_u8("jbd-debug", S_IRUGO | S_IWUSR, jbd_debugfs_dir, &journal_enable_debug); } diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index b7ca3a92a4db..17af879e6e9e 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -2115,7 +2115,8 @@ static void __init jbd2_create_debugfs_entry(void) { jbd2_debugfs_dir = debugfs_create_dir("jbd2", NULL); if (jbd2_debugfs_dir) - jbd2_debug = debugfs_create_u8(JBD2_DEBUG_NAME, S_IRUGO, + jbd2_debug = debugfs_create_u8(JBD2_DEBUG_NAME, + S_IRUGO | S_IWUSR, jbd2_debugfs_dir, &jbd2_journal_enable_debug); } -- GitLab From 869835dfad3eb6f7d90c3255a24b084fea82f30d Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 21 Dec 2009 21:57:04 +0100 Subject: [PATCH 553/618] quota: Improve checking of quota file header When we are asked for vfsv0 quota format and the file is in vfsv1 format (or vice versa), refuse to use the quota file. Also return with error when we don't like the header of quota file. Signed-off-by: Jan Kara --- fs/quota/quota_v2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/quota/quota_v2.c b/fs/quota/quota_v2.c index 669855cf9b61..e3da02f4986f 100644 --- a/fs/quota/quota_v2.c +++ b/fs/quota/quota_v2.c @@ -97,8 +97,11 @@ static int v2_read_file_info(struct super_block *sb, int type) unsigned int version; if (!v2_read_header(sb, type, &dqhead)) - return 0; + return -1; version = le32_to_cpu(dqhead.dqh_version); + if ((info->dqi_fmt_id == QFMT_VFS_V0 && version != 0) || + (info->dqi_fmt_id == QFMT_VFS_V1 && version != 1)) + return -1; size = sb->s_op->quota_read(sb, type, (char *)&dinfo, sizeof(struct v2_disk_dqinfo), V2_DQINFOOFF); -- GitLab From 48e3cbb3f67a27d9c2db075f3d0f700246c40caa Mon Sep 17 00:00:00 2001 From: Eric Millbrandt Date: Tue, 22 Dec 2009 10:13:24 -0500 Subject: [PATCH 554/618] ASoC: Do not write to invalid registers on the wm9712. This patch fixes a bug where "virtual" registers were being written to the ac97 bus. This was causing unrelated registers to become corrupted (headphone 0x04, touchscreen 0x78, etc). This patch duplicates protection that was included in the wm9713 driver. Signed-off-by: Eric Millbrandt Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm9712.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 0ac1215dcd9b..e237bf615129 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -463,7 +463,8 @@ static int ac97_write(struct snd_soc_codec *codec, unsigned int reg, { u16 *cache = codec->reg_cache; - soc_ac97_ops.write(codec->ac97, reg, val); + if (reg < 0x7c) + soc_ac97_ops.write(codec->ac97, reg, val); reg = reg >> 1; if (reg < (ARRAY_SIZE(wm9712_reg))) cache[reg] = val; -- GitLab From 119eecc831a42bd090543568932e440c6831f1bb Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Wed, 23 Dec 2009 09:10:48 +0100 Subject: [PATCH 555/618] Fix usb_serial_probe() problem introduced by the recent kfifo changes The USB serial code was a new user of the kfifo API, and it was missed when porting things to the new kfifo API. Please make the write_fifo in place. Here is my patch to fix the regression and full ported version. Signed-off-by: Stefani Seibold Reported-and-tested-by: Rafael J. Wysocki Cc: Greg KH Cc: Andrew Morton Cc: Alan Stern Signed-off-by: Linus Torvalds --- drivers/usb/serial/generic.c | 12 ++++++------ drivers/usb/serial/usb-serial.c | 5 ++--- include/linux/usb/serial.h | 3 ++- 3 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index b0f1183755c9..f1ea3a33b6e6 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -276,7 +276,7 @@ static int usb_serial_generic_write_start(struct usb_serial_port *port) if (port->write_urb_busy) start_io = false; else { - start_io = (kfifo_len(port->write_fifo) != 0); + start_io = (kfifo_len(&port->write_fifo) != 0); port->write_urb_busy = start_io; } spin_unlock_irqrestore(&port->lock, flags); @@ -285,7 +285,7 @@ static int usb_serial_generic_write_start(struct usb_serial_port *port) return 0; data = port->write_urb->transfer_buffer; - count = kfifo_out_locked(port->write_fifo, data, port->bulk_out_size, &port->lock); + count = kfifo_out_locked(&port->write_fifo, data, port->bulk_out_size, &port->lock); usb_serial_debug_data(debug, &port->dev, __func__, count, data); /* set up our urb */ @@ -345,7 +345,7 @@ int usb_serial_generic_write(struct tty_struct *tty, return usb_serial_multi_urb_write(tty, port, buf, count); - count = kfifo_in_locked(port->write_fifo, buf, count, &port->lock); + count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock); result = usb_serial_generic_write_start(port); if (result >= 0) @@ -370,7 +370,7 @@ int usb_serial_generic_write_room(struct tty_struct *tty) (serial->type->max_in_flight_urbs - port->urbs_in_flight); } else if (serial->num_bulk_out) - room = port->write_fifo->size - kfifo_len(port->write_fifo); + room = kfifo_avail(&port->write_fifo); spin_unlock_irqrestore(&port->lock, flags); dbg("%s - returns %d", __func__, room); @@ -391,7 +391,7 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) chars = port->tx_bytes_flight; spin_unlock_irqrestore(&port->lock, flags); } else if (serial->num_bulk_out) - chars = kfifo_len(port->write_fifo); + chars = kfifo_len(&port->write_fifo); dbg("%s - returns %d", __func__, chars); return chars; @@ -507,7 +507,7 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) if (status) { dbg("%s - nonzero multi-urb write bulk status " "received: %d", __func__, status); - kfifo_reset(port->write_fifo); + kfifo_reset_out(&port->write_fifo); } else usb_serial_generic_write_start(port); } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 636a4f23445e..33c85f7084f8 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -595,8 +595,7 @@ static void port_release(struct device *dev) usb_free_urb(port->write_urb); usb_free_urb(port->interrupt_in_urb); usb_free_urb(port->interrupt_out_urb); - if (!IS_ERR(port->write_fifo) && port->write_fifo) - kfifo_free(port->write_fifo); + kfifo_free(&port->write_fifo); kfree(port->bulk_in_buffer); kfree(port->bulk_out_buffer); kfree(port->interrupt_in_buffer); @@ -939,7 +938,7 @@ int usb_serial_probe(struct usb_interface *interface, dev_err(&interface->dev, "No free urbs available\n"); goto probe_error; } - if (kfifo_alloc(port->write_fifo, PAGE_SIZE, GFP_KERNEL)) + if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL)) goto probe_error; buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); port->bulk_out_size = buffer_size; diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index acf6e457c04b..1819396ed501 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -16,6 +16,7 @@ #include #include #include +#include #define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ #define SERIAL_TTY_MINORS 254 /* loads of devices :) */ @@ -94,7 +95,7 @@ struct usb_serial_port { unsigned char *bulk_out_buffer; int bulk_out_size; struct urb *write_urb; - struct kfifo *write_fifo; + struct kfifo write_fifo; int write_urb_busy; __u8 bulk_out_endpointAddress; -- GitLab From 9c717de946ed7f5782e6dffacf2d05859073058c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 23 Dec 2009 09:23:33 -0800 Subject: [PATCH 556/618] kfifo: fix Error/broken kernel-doc notation Fix kernel-doc errors and warnings in new header file kfifo.h. Don't use kernel-doc "/**" for internal functions whose comments are not in kernel-doc format. kernel-doc section header names (like "Note:") must be unique per function. Looks like I need to document that. Error(include/linux/kfifo.h:76): duplicate section name 'Note' Warning(include/linux/kfifo.h:88): Excess function parameter 'size' description in 'INIT_KFIFO' Error(include/linux/kfifo.h:101): duplicate section name 'Note' Warning(include/linux/kfifo.h:257): No description found for parameter 'fifo' (many of this last type, from internal functions) Signed-off-by: Randy Dunlap Cc: Stefani Seibold Signed-off-by: Linus Torvalds --- include/linux/kfifo.h | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 486e8ad3bb50..3d44e9c65a8e 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -69,8 +69,8 @@ struct kfifo { * @name: name of the declared kfifo datatype * @size: size of the fifo buffer * - * Note: the macro can be used inside struct or union declaration - * Note: the macro creates two objects: + * Note1: the macro can be used inside struct or union declaration + * Note2: the macro creates two objects: * A kfifo object with the given name and a buffer for the kfifo * object named name##kfifo_buffer */ @@ -83,7 +83,6 @@ union { \ /** * INIT_KFIFO - Initialize a kfifo declared by DECLARED_KFIFO * @name: name of the declared kfifo datatype - * @size: size of the fifo buffer */ #define INIT_KFIFO(name) \ name = __kfifo_initializer(sizeof(name##kfifo_buffer) - \ @@ -94,8 +93,8 @@ union { \ * @name: name of the declared kfifo datatype * @size: size of the fifo buffer * - * Note: the macro can be used for global and local kfifo data type variables - * Note: the macro creates two objects: + * Note1: the macro can be used for global and local kfifo data type variables + * Note2: the macro creates two objects: * A kfifo object with the given name and a buffer for the kfifo * object named name##kfifo_buffer */ @@ -249,7 +248,7 @@ extern __must_check unsigned int kfifo_from_user(struct kfifo *fifo, extern __must_check unsigned int kfifo_to_user(struct kfifo *fifo, void __user *to, unsigned int n); -/** +/* * __kfifo_add_out internal helper function for updating the out offset */ static inline void __kfifo_add_out(struct kfifo *fifo, @@ -259,7 +258,7 @@ static inline void __kfifo_add_out(struct kfifo *fifo, fifo->out += off; } -/** +/* * __kfifo_add_in internal helper function for updating the in offset */ static inline void __kfifo_add_in(struct kfifo *fifo, @@ -269,7 +268,7 @@ static inline void __kfifo_add_in(struct kfifo *fifo, fifo->in += off; } -/** +/* * __kfifo_off internal helper function for calculating the index of a * given offeset */ @@ -278,7 +277,7 @@ static inline unsigned int __kfifo_off(struct kfifo *fifo, unsigned int off) return off & (fifo->size - 1); } -/** +/* * __kfifo_peek_n internal helper function for determinate the length of * the next record in the fifo */ @@ -299,7 +298,7 @@ static inline unsigned int __kfifo_peek_n(struct kfifo *fifo, #undef __KFIFO_GET } -/** +/* * __kfifo_poke_n internal helper function for storing the length of * the next record into the fifo */ @@ -319,7 +318,7 @@ static inline void __kfifo_poke_n(struct kfifo *fifo, #undef __KFIFO_PUT } -/** +/* * __kfifo_in_... internal functions for put date into the fifo * do not call it directly, use kfifo_in_rec() instead */ @@ -367,7 +366,7 @@ static inline __must_check unsigned int kfifo_in_rec(struct kfifo *fifo, return __kfifo_in_rec(fifo, from, n, recsize); } -/** +/* * __kfifo_out_... internal functions for get date from the fifo * do not call it directly, use kfifo_out_rec() instead */ @@ -425,7 +424,7 @@ static inline __must_check unsigned int kfifo_out_rec(struct kfifo *fifo, return __kfifo_out_rec(fifo, to, n, recsize, total); } -/** +/* * __kfifo_from_user_... internal functions for transfer from user space into * the fifo. do not call it directly, use kfifo_from_user_rec() instead */ @@ -474,7 +473,7 @@ static inline __must_check unsigned int kfifo_from_user_rec(struct kfifo *fifo, return __kfifo_from_user_rec(fifo, from, n, recsize); } -/** +/* * __kfifo_to_user_... internal functions for transfer fifo data into user space * do not call it directly, use kfifo_to_user_rec() instead */ @@ -533,7 +532,7 @@ static inline __must_check unsigned int kfifo_to_user_rec(struct kfifo *fifo, return __kfifo_to_user_rec(fifo, to, n, recsize, total); } -/** +/* * __kfifo_peek_... internal functions for peek into the next fifo record * do not call it directly, use kfifo_peek_rec() instead */ @@ -557,7 +556,7 @@ static inline __must_check unsigned int kfifo_peek_rec(struct kfifo *fifo, return __kfifo_peek_n(fifo, recsize); } -/** +/* * __kfifo_skip_... internal functions for skip the next fifo record * do not call it directly, use kfifo_skip_rec() instead */ -- GitLab From 95e70e87533f9d117d369495ee633cb7d18dc802 Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Wed, 23 Dec 2009 17:28:45 +0100 Subject: [PATCH 557/618] ALSA: hda - Add STAC9205 PCI_QUIRK for Dell Vostro 1700 Signed-off-by: Anisse Astier Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 417fb22ae83c..eeda7beeb57a 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2104,6 +2104,7 @@ static unsigned int ref9205_pin_configs[12] = { 10280204 1028021F 10280228 (Dell Vostro 1500) + 10280229 (Dell Vostro 1700) */ static unsigned int dell_9205_m42_pin_configs[12] = { 0x0321101F, 0x03A11020, 0x400003FA, 0x90170310, @@ -2189,6 +2190,8 @@ static struct snd_pci_quirk stac9205_cfg_tbl[] = { "Dell Inspiron", STAC_9205_DELL_M44), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0228, "Dell Vostro 1500", STAC_9205_DELL_M42), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0229, + "Dell Vostro 1700", STAC_9205_DELL_M42), /* Gateway */ SND_PCI_QUIRK(0x107b, 0x0560, "Gateway T6834c", STAC_9205_EAPD), SND_PCI_QUIRK(0x107b, 0x0565, "Gateway T1616", STAC_9205_EAPD), -- GitLab From f1f76f865b5f66db5b5c7f2d19874f2bb9b43b8d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 16 Dec 2009 21:31:33 +0000 Subject: [PATCH 558/618] devtmpfs: Convert dirlock to a mutex devtmpfs has a rw_lock dirlock which serializes delete_path and create_path. This code was obviously never tested with the usual set of debugging facilities enabled. In the dirlock held sections the code calls: - vfs functions which take mutexes - kmalloc(, GFP_KERNEL) In both code pathes the might sleep warning triggers and spams dmesg. Convert the rw_lock to a mutex. There is no reason why this needs to be a rwlock. Signed-off-by: Thomas Gleixner Cc: Kay Sievers Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/base/devtmpfs.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c index 50375bb8e51d..278371c7bf5a 100644 --- a/drivers/base/devtmpfs.c +++ b/drivers/base/devtmpfs.c @@ -32,7 +32,7 @@ static int dev_mount = 1; static int dev_mount; #endif -static rwlock_t dirlock; +static DEFINE_MUTEX(dirlock); static int __init mount_param(char *str) { @@ -93,7 +93,7 @@ static int create_path(const char *nodepath) { int err; - read_lock(&dirlock); + mutex_lock(&dirlock); err = dev_mkdir(nodepath, 0755); if (err == -ENOENT) { char *path; @@ -117,7 +117,7 @@ static int create_path(const char *nodepath) } kfree(path); } - read_unlock(&dirlock); + mutex_unlock(&dirlock); return err; } @@ -229,7 +229,7 @@ static int delete_path(const char *nodepath) if (!path) return -ENOMEM; - write_lock(&dirlock); + mutex_lock(&dirlock); for (;;) { char *base; @@ -241,7 +241,7 @@ static int delete_path(const char *nodepath) if (err) break; } - write_unlock(&dirlock); + mutex_unlock(&dirlock); kfree(path); return err; @@ -352,8 +352,6 @@ int __init devtmpfs_init(void) int err; struct vfsmount *mnt; - rwlock_init(&dirlock); - err = register_filesystem(&dev_fs_type); if (err) { printk(KERN_ERR "devtmpfs: unable to register devtmpfs " -- GitLab From 9329d1beaeed1a94f030c784dcec5ff973f402c4 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 18 Dec 2009 21:18:15 +0100 Subject: [PATCH 559/618] vfs: get_sb_single() - do not pass options twice Filesystem code usually destroys the option buffer while parsing it. This leads to errors when the same buffer is passed twice. In case we fill a new superblock do not call remount. This is needed to quite a warning that the debugfs code causes every boot. Cc: Miklos Szeredi Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- fs/super.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/super.c b/fs/super.c index 19eb70b374bc..aff046b0fe78 100644 --- a/fs/super.c +++ b/fs/super.c @@ -901,8 +901,9 @@ int get_sb_single(struct file_system_type *fs_type, return error; } s->s_flags |= MS_ACTIVE; + } else { + do_remount_sb(s, flags, data, 0); } - do_remount_sb(s, flags, data, 0); simple_set_mnt(mnt, s); return 0; } -- GitLab From 8e9b9362266dd16255473c080d846b13e27247bf Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sun, 6 Dec 2009 12:24:31 +0100 Subject: [PATCH 560/618] Doc/stable rules: add new cherry-pick logic - it is possible to submit patches for the stable queue without sending them directly stable@kernel.org. If the tag (Cc: stable@kernel.org) is available in the sign-off area than hpa's script will filter them into the stable mailbox once it hits Linus' tree. - Patches which require others to be applied first can be also specified. This was discussued in http://lkml.org/lkml/2009/11/9/474 Signed-off-by: Sebastian Andrzej Siewior Cc: Brandon Philips Signed-off-by: Greg Kroah-Hartman --- Documentation/stable_kernel_rules.txt | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt index a452227361b1..5effa5bd993b 100644 --- a/Documentation/stable_kernel_rules.txt +++ b/Documentation/stable_kernel_rules.txt @@ -26,13 +26,33 @@ Procedure for submitting patches to the -stable tree: - Send the patch, after verifying that it follows the above rules, to stable@kernel.org. + - To have the patch automatically included in the stable tree, add the + the tag + Cc: stable@kernel.org + in the sign-off area. Once the patch is merged it will be applied to + the stable tree without anything else needing to be done by the author + or subsystem maintainer. + - If the patch requires other patches as prerequisites which can be + cherry-picked than this can be specified in the following format in + the sign-off area: + + Cc: # .32.x: a1f84a3: sched: Check for idle + Cc: # .32.x: 1b9508f: sched: Rate-limit newidle + Cc: # .32.x: fd21073: sched: Fix affinity logic + Cc: # .32.x + Signed-off-by: Ingo Molnar + + The tag sequence has the meaning of: + git cherry-pick a1f84a3 + git cherry-pick 1b9508f + git cherry-pick fd21073 + git cherry-pick + - The sender will receive an ACK when the patch has been accepted into the queue, or a NAK if the patch is rejected. This response might take a few days, according to the developer's schedules. - If accepted, the patch will be added to the -stable queue, for review by other developers and by the relevant subsystem maintainer. - - If the stable@kernel.org address is added to a patch, when it goes into - Linus's tree it will automatically be emailed to the stable team. - Security patches should not be sent to this alias, but instead to the documented security@kernel.org address. -- GitLab From 26579ab70aa0e0ea434e6e100279d2f67c094431 Mon Sep 17 00:00:00 2001 From: Phil Carmody Date: Fri, 18 Dec 2009 15:34:19 +0200 Subject: [PATCH 561/618] Driver core: device_attribute parameters can often be const* Most device_attributes are const, and are begging to be put in a ro section. However, the create and remove file interfaces were failing to propagate the const promise which the only functions they call offer. Signed-off-by: Phil Carmody Signed-off-by: Greg Kroah-Hartman --- Documentation/filesystems/sysfs.txt | 8 ++++---- drivers/base/core.c | 6 ++++-- include/linux/device.h | 4 ++-- 3 files changed, 10 insertions(+), 8 deletions(-) diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index b245d524d568..a4ac2b98c613 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -91,8 +91,8 @@ struct device_attribute { const char *buf, size_t count); }; -int device_create_file(struct device *, struct device_attribute *); -void device_remove_file(struct device *, struct device_attribute *); +int device_create_file(struct device *, const struct device_attribute *); +void device_remove_file(struct device *, const struct device_attribute *); It also defines this helper for defining device attributes: @@ -316,8 +316,8 @@ DEVICE_ATTR(_name, _mode, _show, _store); Creation/Removal: -int device_create_file(struct device *device, struct device_attribute * attr); -void device_remove_file(struct device * dev, struct device_attribute * attr); +int device_create_file(struct device *dev, const struct device_attribute * attr); +void device_remove_file(struct device *dev, const struct device_attribute * attr); - bus drivers (include/linux/device.h) diff --git a/drivers/base/core.c b/drivers/base/core.c index f1290cbd1350..2fd9e611f8a6 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -446,7 +446,8 @@ struct kset *devices_kset; * @dev: device. * @attr: device attribute descriptor. */ -int device_create_file(struct device *dev, struct device_attribute *attr) +int device_create_file(struct device *dev, + const struct device_attribute *attr) { int error = 0; if (dev) @@ -459,7 +460,8 @@ int device_create_file(struct device *dev, struct device_attribute *attr) * @dev: device. * @attr: device attribute descriptor. */ -void device_remove_file(struct device *dev, struct device_attribute *attr) +void device_remove_file(struct device *dev, + const struct device_attribute *attr) { if (dev) sysfs_remove_file(&dev->kobj, &attr->attr); diff --git a/include/linux/device.h b/include/linux/device.h index 2a73d9bcbc9c..aa5b3e66a147 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -319,9 +319,9 @@ struct device_attribute { struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store) extern int __must_check device_create_file(struct device *device, - struct device_attribute *entry); + const struct device_attribute *entry); extern void device_remove_file(struct device *dev, - struct device_attribute *attr); + const struct device_attribute *attr); extern int __must_check device_create_bin_file(struct device *dev, struct bin_attribute *attr); extern void device_remove_bin_file(struct device *dev, -- GitLab From 66ecb92be9eb579df93add22d19843e7869f168e Mon Sep 17 00:00:00 2001 From: Phil Carmody Date: Fri, 18 Dec 2009 15:34:20 +0200 Subject: [PATCH 562/618] Driver core: bin_attribute parameters can often be const* Many struct bin_attribute descriptors are purely read-only structures, and there's no need to change them. Therefore make the promise not to, which will let those descriptors be put in a ro section. Signed-off-by: Phil Carmody Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 6 ++++-- fs/sysfs/bin.c | 6 ++++-- include/linux/device.h | 6 +++--- include/linux/sysfs.h | 9 +++++---- 4 files changed, 16 insertions(+), 11 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 2fd9e611f8a6..83afc8b8f27b 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -472,7 +472,8 @@ void device_remove_file(struct device *dev, * @dev: device. * @attr: device binary attribute descriptor. */ -int device_create_bin_file(struct device *dev, struct bin_attribute *attr) +int device_create_bin_file(struct device *dev, + const struct bin_attribute *attr) { int error = -EINVAL; if (dev) @@ -486,7 +487,8 @@ EXPORT_SYMBOL_GPL(device_create_bin_file); * @dev: device. * @attr: device binary attribute descriptor. */ -void device_remove_bin_file(struct device *dev, struct bin_attribute *attr) +void device_remove_bin_file(struct device *dev, + const struct bin_attribute *attr) { if (dev) sysfs_remove_bin_file(&dev->kobj, attr); diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c index 60c702bc10ae..a0a500af24a1 100644 --- a/fs/sysfs/bin.c +++ b/fs/sysfs/bin.c @@ -483,7 +483,8 @@ void unmap_bin_file(struct sysfs_dirent *attr_sd) * @attr: attribute descriptor. */ -int sysfs_create_bin_file(struct kobject * kobj, struct bin_attribute * attr) +int sysfs_create_bin_file(struct kobject *kobj, + const struct bin_attribute *attr) { BUG_ON(!kobj || !kobj->sd || !attr); @@ -497,7 +498,8 @@ int sysfs_create_bin_file(struct kobject * kobj, struct bin_attribute * attr) * @attr: attribute descriptor. */ -void sysfs_remove_bin_file(struct kobject * kobj, struct bin_attribute * attr) +void sysfs_remove_bin_file(struct kobject *kobj, + const struct bin_attribute *attr) { sysfs_hash_and_remove(kobj->sd, attr->attr.name); } diff --git a/include/linux/device.h b/include/linux/device.h index aa5b3e66a147..10d74ce93a46 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -319,13 +319,13 @@ struct device_attribute { struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store) extern int __must_check device_create_file(struct device *device, - const struct device_attribute *entry); + const struct device_attribute *entry); extern void device_remove_file(struct device *dev, const struct device_attribute *attr); extern int __must_check device_create_bin_file(struct device *dev, - struct bin_attribute *attr); + const struct bin_attribute *attr); extern void device_remove_bin_file(struct device *dev, - struct bin_attribute *attr); + const struct bin_attribute *attr); extern int device_schedule_callback_owner(struct device *dev, void (*func)(struct device *dev), struct module *owner); diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 9d68fed50f11..cfa83083a2d4 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -99,8 +99,9 @@ int __must_check sysfs_chmod_file(struct kobject *kobj, struct attribute *attr, void sysfs_remove_file(struct kobject *kobj, const struct attribute *attr); int __must_check sysfs_create_bin_file(struct kobject *kobj, - struct bin_attribute *attr); -void sysfs_remove_bin_file(struct kobject *kobj, struct bin_attribute *attr); + const struct bin_attribute *attr); +void sysfs_remove_bin_file(struct kobject *kobj, + const struct bin_attribute *attr); int __must_check sysfs_create_link(struct kobject *kobj, struct kobject *target, const char *name); @@ -175,13 +176,13 @@ static inline void sysfs_remove_file(struct kobject *kobj, } static inline int sysfs_create_bin_file(struct kobject *kobj, - struct bin_attribute *attr) + const struct bin_attribute *attr) { return 0; } static inline void sysfs_remove_bin_file(struct kobject *kobj, - struct bin_attribute *attr) + const struct bin_attribute *attr) { } -- GitLab From 099c2f21d8cf0724b85abb2c589d6276953781b7 Mon Sep 17 00:00:00 2001 From: Phil Carmody Date: Fri, 18 Dec 2009 15:34:21 +0200 Subject: [PATCH 563/618] Driver core: driver_attribute parameters can often be const* Many struct driver_attribute descriptors are purely read-only structures, and there's no need to change them. Therefore make the promise not to, which will let those descriptors be put in a ro section. Signed-off-by: Phil Carmody Signed-off-by: Greg Kroah-Hartman --- Documentation/driver-model/driver.txt | 4 ++-- Documentation/filesystems/sysfs.txt | 4 ++-- drivers/base/driver.c | 4 ++-- include/linux/device.h | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt index 60120fb3b961..d2cd6fb8ba9e 100644 --- a/Documentation/driver-model/driver.txt +++ b/Documentation/driver-model/driver.txt @@ -226,5 +226,5 @@ struct driver_attribute driver_attr_debug; This can then be used to add and remove the attribute from the driver's directory using: -int driver_create_file(struct device_driver *, struct driver_attribute *); -void driver_remove_file(struct device_driver *, struct driver_attribute *); +int driver_create_file(struct device_driver *, const struct driver_attribute *); +void driver_remove_file(struct device_driver *, const struct driver_attribute *); diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index a4ac2b98c613..931c806642c5 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -358,7 +358,7 @@ DRIVER_ATTR(_name, _mode, _show, _store) Creation/Removal: -int driver_create_file(struct device_driver *, struct driver_attribute *); -void driver_remove_file(struct device_driver *, struct driver_attribute *); +int driver_create_file(struct device_driver *, const struct driver_attribute *); +void driver_remove_file(struct device_driver *, const struct driver_attribute *); diff --git a/drivers/base/driver.c b/drivers/base/driver.c index f367885a7646..90c9fff09ead 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -98,7 +98,7 @@ EXPORT_SYMBOL_GPL(driver_find_device); * @attr: driver attribute descriptor. */ int driver_create_file(struct device_driver *drv, - struct driver_attribute *attr) + const struct driver_attribute *attr) { int error; if (drv) @@ -115,7 +115,7 @@ EXPORT_SYMBOL_GPL(driver_create_file); * @attr: driver attribute descriptor. */ void driver_remove_file(struct device_driver *drv, - struct driver_attribute *attr) + const struct driver_attribute *attr) { if (drv) sysfs_remove_file(&drv->p->kobj, &attr->attr); diff --git a/include/linux/device.h b/include/linux/device.h index 10d74ce93a46..a62799f2ab00 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -166,9 +166,9 @@ struct driver_attribute driver_attr_##_name = \ __ATTR(_name, _mode, _show, _store) extern int __must_check driver_create_file(struct device_driver *driver, - struct driver_attribute *attr); + const struct driver_attribute *attr); extern void driver_remove_file(struct device_driver *driver, - struct driver_attribute *attr); + const struct driver_attribute *attr); extern int __must_check driver_add_kobj(struct device_driver *drv, struct kobject *kobj, -- GitLab From e6309e7568d4b9d62298a887b10de42df11cb8c1 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 10 Dec 2009 19:32:49 +0000 Subject: [PATCH 564/618] Driver-core: Fix bogus 0 error return in device_add() If device_add() is called with a device which does not have dev->p set up, then device_private_init() is called. If that succeeds, then the error variable is set to 0. Now if the dev_name(dev) check further down fails, then device_add() correctly terminates, but returns 0. That of course lets the driver progress. If later another driver uses this half set up device as parent then device_add() of the child device explodes and renders sysfs completely unusable. Set the error to -EINVAL if dev_name() check fails. Signed-off-by: Thomas Gleixner Cc: Kay Sievers Cc: "Hans J. Koch" Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 83afc8b8f27b..282025770429 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -909,8 +909,10 @@ int device_add(struct device *dev) dev->init_name = NULL; } - if (!dev_name(dev)) + if (!dev_name(dev)) { + error = -EINVAL; goto name_error; + } pr_debug("device: '%s': %s\n", dev_name(dev), __func__); -- GitLab From 99b28f1b4126582f87ce454d4affb823bddf2cd8 Mon Sep 17 00:00:00 2001 From: Phil Carmody Date: Mon, 14 Dec 2009 20:28:12 +0200 Subject: [PATCH 565/618] driver core: Prevent reference to freed memory on error path priv is drv->p. So only free drv->p after we've finished using priv. Found using a static code analysis tool Signed-off-by: Phil Carmody Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 63c143e54a57..c0c5a43d9fb3 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -703,9 +703,9 @@ int bus_add_driver(struct device_driver *drv) return 0; out_unregister: + kobject_put(&priv->kobj); kfree(drv->p); drv->p = NULL; - kobject_put(&priv->kobj); out_put_bus: bus_put(bus); return error; -- GitLab From 0787fdf70ba4c41a3350096ebaa347a17e900385 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 21 Dec 2009 11:41:08 -0500 Subject: [PATCH 566/618] Driver core: export platform_device_register_data as a GPL symbol This allows MFD's to register/bind drivers for their sub devices while still being compiled as a module. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 9d2ee25deaf5..58efaf2f1259 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -441,6 +441,7 @@ struct platform_device *platform_device_register_data( platform_device_put(pdev); return ERR_PTR(retval); } +EXPORT_SYMBOL_GPL(platform_device_register_data); static int platform_drv_probe(struct device *_dev) { -- GitLab From 8042273801059884da2d53bbca34575d090b6f4e Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 22 Dec 2009 22:25:16 +0100 Subject: [PATCH 567/618] devtmpfs: unlock mutex in case of string allocation error Reported-by: Kirill A. Shutemov Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/devtmpfs.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c index 278371c7bf5a..090dd4851301 100644 --- a/drivers/base/devtmpfs.c +++ b/drivers/base/devtmpfs.c @@ -101,8 +101,10 @@ static int create_path(const char *nodepath) /* parent directories do not exist, create them */ path = kstrdup(nodepath, GFP_KERNEL); - if (!path) - return -ENOMEM; + if (!path) { + err = -ENOMEM; + goto out; + } s = path; for (;;) { s = strchr(s, '/'); @@ -117,6 +119,7 @@ static int create_path(const char *nodepath) } kfree(path); } +out: mutex_unlock(&dirlock); return err; } -- GitLab From d7edf47947f9d921be6ca5fc8e83049124466f98 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Mon, 23 Nov 2009 10:28:24 +0800 Subject: [PATCH 568/618] Staging: sm7xx: add a new framebuffer driver Yeeloong netbook has a sm712 video card, need this driver, but it is not ready to upstream yet, so, go to drivers/staing at first. This source code is originally from Silicon Motion Technology Corp, and maintained at http://dev.lemote.com/code/linux_loongson for YeeLoong netbook. I have done a lot of cleanups for it and merged it into my git repository at http://dev.lemote.com/code/rt4ls. Thanks to Simon for testing it on a little-endian x86 platform. Thanks to Olivier Croset for reporting the problem about __BIG_ENDIAN compiling problem and send a relative patch. The suspend/resume and blank support are contributed by Jason from Silicon Motion Technology. Tested-by: Simon Braunschmidt Signed-off-by: Wu Zhangjin Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 2 + drivers/staging/Makefile | 1 + drivers/staging/sm7xx/Kconfig | 15 + drivers/staging/sm7xx/Makefile | 3 + drivers/staging/sm7xx/TODO | 10 + drivers/staging/sm7xx/smtc2d.c | 979 +++++++++++++++++++++++++ drivers/staging/sm7xx/smtc2d.h | 530 ++++++++++++++ drivers/staging/sm7xx/smtcfb.c | 1253 ++++++++++++++++++++++++++++++++ drivers/staging/sm7xx/smtcfb.h | 793 ++++++++++++++++++++ 9 files changed, 3586 insertions(+) create mode 100644 drivers/staging/sm7xx/Kconfig create mode 100644 drivers/staging/sm7xx/Makefile create mode 100644 drivers/staging/sm7xx/TODO create mode 100644 drivers/staging/sm7xx/smtc2d.c create mode 100644 drivers/staging/sm7xx/smtc2d.h create mode 100644 drivers/staging/sm7xx/smtcfb.c create mode 100644 drivers/staging/sm7xx/smtcfb.h diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 093f57af32d3..db0de940949e 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -145,5 +145,7 @@ source "drivers/staging/wavelan/Kconfig" source "drivers/staging/netwave/Kconfig" +source "drivers/staging/sm7xx/Kconfig" + endif # !STAGING_EXCLUDE_BUILD endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 069864f4391e..73c6a71155e0 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -53,3 +53,4 @@ obj-$(CONFIG_ARLAN) += arlan/ obj-$(CONFIG_WAVELAN) += wavelan/ obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan/ obj-$(CONFIG_PCMCIA_NETWAVE) += netwave/ +obj-$(CONFIG_FB_SM7XX) += sm7xx/ diff --git a/drivers/staging/sm7xx/Kconfig b/drivers/staging/sm7xx/Kconfig new file mode 100644 index 000000000000..204dbfc3c38b --- /dev/null +++ b/drivers/staging/sm7xx/Kconfig @@ -0,0 +1,15 @@ +config FB_SM7XX + tristate "Silicon Motion SM7XX Frame Buffer Support" + depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Frame Buffer driver for the Silicon Motion SM7XX serial graphic card. + +config FB_SM7XX_ACCEL + bool "Siliconmotion Acceleration functions (EXPERIMENTAL)" + depends on FB_SM7XX && EXPERIMENTAL + help + This will compile the Trident frame buffer device with + acceleration functions. diff --git a/drivers/staging/sm7xx/Makefile b/drivers/staging/sm7xx/Makefile new file mode 100644 index 000000000000..f43cb9106305 --- /dev/null +++ b/drivers/staging/sm7xx/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_FB_SM7XX) += sm7xx.o + +sm7xx-y := smtcfb.o diff --git a/drivers/staging/sm7xx/TODO b/drivers/staging/sm7xx/TODO new file mode 100644 index 000000000000..1f61f5e11cf5 --- /dev/null +++ b/drivers/staging/sm7xx/TODO @@ -0,0 +1,10 @@ +TODO: +- Dual head support +- use kernel coding style +- checkpatch.pl clean +- refine the code and remove unused code +- use kernel framebuffer mode setting instead of hard code +- move it to drivers/video/sm7xx/ or make it be drivers/video/sm7xxfb.c + +Please send any patches to Greg Kroah-Hartman and +Teddy Wang . diff --git a/drivers/staging/sm7xx/smtc2d.c b/drivers/staging/sm7xx/smtc2d.c new file mode 100644 index 000000000000..133b86c6a678 --- /dev/null +++ b/drivers/staging/sm7xx/smtc2d.c @@ -0,0 +1,979 @@ +/* + * Silicon Motion SM7XX 2D drawing engine functions. + * + * Copyright (C) 2006 Silicon Motion Technology Corp. + * Author: Boyod boyod.yang@siliconmotion.com.cn + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Version 0.10.26192.21.01 + * - Add PowerPC support + * - Add 2D support for Lynx - + * Verified on 2.6.19.2 + * Boyod.yang + */ + +unsigned char smtc_de_busy; + +void SMTC_write2Dreg(unsigned long nOffset, unsigned long nData) +{ + writel(nData, smtc_2DBaseAddress + nOffset); +} + +unsigned long SMTC_read2Dreg(unsigned long nOffset) +{ + return readl(smtc_2DBaseAddress + nOffset); +} + +void SMTC_write2Ddataport(unsigned long nOffset, unsigned long nData) +{ + writel(nData, smtc_2Ddataport + nOffset); +} + +/********************************************************************** + * + * deInit + * + * Purpose + * Drawing engine initialization. + * + **********************************************************************/ + +void deInit(unsigned int nModeWidth, unsigned int nModeHeight, + unsigned int bpp) +{ + /* Get current power configuration. */ + unsigned char clock; + clock = smtc_seqr(0x21); + + /* initialize global 'mutex lock' variable */ + smtc_de_busy = 0; + + /* Enable 2D Drawing Engine */ + smtc_seqw(0x21, clock & 0xF8); + + SMTC_write2Dreg(DE_CLIP_TL, + FIELD_VALUE(0, DE_CLIP_TL, TOP, 0) | + FIELD_SET(0, DE_CLIP_TL, STATUS, DISABLE) | + FIELD_SET(0, DE_CLIP_TL, INHIBIT, OUTSIDE) | + FIELD_VALUE(0, DE_CLIP_TL, LEFT, 0)); + + if (bpp >= 24) { + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + nModeWidth * 3) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + nModeWidth + * 3)); + } else { + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + nModeWidth) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + nModeWidth)); + } + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + nModeWidth) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + nModeWidth)); + + switch (bpp) { + case 8: + SMTC_write2Dreg(DE_STRETCH_FORMAT, + FIELD_SET(0, DE_STRETCH_FORMAT, PATTERN_XY, + NORMAL) | FIELD_VALUE(0, + DE_STRETCH_FORMAT, + PATTERN_Y, + 0) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, PATTERN_X, + 0) | FIELD_SET(0, DE_STRETCH_FORMAT, + PIXEL_FORMAT, + 8) | FIELD_SET(0, + DE_STRETCH_FORMAT, + ADDRESSING, + XY) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, + SOURCE_HEIGHT, 3)); + break; + case 24: + SMTC_write2Dreg(DE_STRETCH_FORMAT, + FIELD_SET(0, DE_STRETCH_FORMAT, PATTERN_XY, + NORMAL) | FIELD_VALUE(0, + DE_STRETCH_FORMAT, + PATTERN_Y, + 0) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, PATTERN_X, + 0) | FIELD_SET(0, DE_STRETCH_FORMAT, + PIXEL_FORMAT, + 24) | FIELD_SET(0, + DE_STRETCH_FORMAT, + ADDRESSING, + XY) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, + SOURCE_HEIGHT, 3)); + break; + case 16: + default: + SMTC_write2Dreg(DE_STRETCH_FORMAT, + FIELD_SET(0, DE_STRETCH_FORMAT, PATTERN_XY, + NORMAL) | FIELD_VALUE(0, + DE_STRETCH_FORMAT, + PATTERN_Y, + 0) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, PATTERN_X, + 0) | FIELD_SET(0, DE_STRETCH_FORMAT, + PIXEL_FORMAT, + 16) | FIELD_SET(0, + DE_STRETCH_FORMAT, + ADDRESSING, + XY) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, + SOURCE_HEIGHT, 3)); + break; + } + + SMTC_write2Dreg(DE_MASKS, + FIELD_VALUE(0, DE_MASKS, BYTE_MASK, 0xFFFF) | + FIELD_VALUE(0, DE_MASKS, BIT_MASK, 0xFFFF)); + SMTC_write2Dreg(DE_COLOR_COMPARE_MASK, + FIELD_VALUE(0, DE_COLOR_COMPARE_MASK, MASKS, \ + 0xFFFFFF)); + SMTC_write2Dreg(DE_COLOR_COMPARE, + FIELD_VALUE(0, DE_COLOR_COMPARE, COLOR, 0xFFFFFF)); +} + +void deVerticalLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX, + unsigned long nY, + unsigned long dst_height, unsigned long nColor) +{ + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS, + dst_base)); + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, dst_pitch) | + FIELD_VALUE(0, DE_PITCH, SOURCE, dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, nX) | + FIELD_VALUE(0, DE_DESTINATION, Y, nY)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, 1) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, dst_height)); + + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(0, DE_CONTROL, STATUS, START) | + FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT) | + FIELD_SET(0, DE_CONTROL, MAJOR, Y) | + FIELD_SET(0, DE_CONTROL, STEP_X, NEGATIVE) | + FIELD_SET(0, DE_CONTROL, STEP_Y, POSITIVE) | + FIELD_SET(0, DE_CONTROL, LAST_PIXEL, OFF) | + FIELD_SET(0, DE_CONTROL, COMMAND, SHORT_STROKE) | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_VALUE(0, DE_CONTROL, ROP, 0x0C)); + + smtc_de_busy = 1; +} + +void deHorizontalLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX, + unsigned long nY, + unsigned long dst_width, unsigned long nColor) +{ + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS, + dst_base)); + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, dst_pitch) | + FIELD_VALUE(0, DE_PITCH, SOURCE, dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, + DISABLE) | FIELD_VALUE(0, DE_DESTINATION, X, + nX) | FIELD_VALUE(0, + DE_DESTINATION, + Y, + nY)); + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, + dst_width) | FIELD_VALUE(0, DE_DIMENSION, + Y_ET, 1)); + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(0, DE_CONTROL, STATUS, START) | FIELD_SET(0, + DE_CONTROL, + DIRECTION, + RIGHT_TO_LEFT) + | FIELD_SET(0, DE_CONTROL, MAJOR, X) | FIELD_SET(0, + DE_CONTROL, + STEP_X, + POSITIVE) + | FIELD_SET(0, DE_CONTROL, STEP_Y, + NEGATIVE) | FIELD_SET(0, DE_CONTROL, + LAST_PIXEL, + OFF) | FIELD_SET(0, + DE_CONTROL, + COMMAND, + SHORT_STROKE) + | FIELD_SET(0, DE_CONTROL, ROP_SELECT, + ROP2) | FIELD_VALUE(0, DE_CONTROL, ROP, + 0x0C)); + + smtc_de_busy = 1; +} + +void deLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX1, + unsigned long nY1, + unsigned long nX2, unsigned long nY2, unsigned long nColor) +{ + unsigned long nCommand = + FIELD_SET(0, DE_CONTROL, STATUS, START) | + FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT) | + FIELD_SET(0, DE_CONTROL, MAJOR, X) | + FIELD_SET(0, DE_CONTROL, STEP_X, POSITIVE) | + FIELD_SET(0, DE_CONTROL, STEP_Y, POSITIVE) | + FIELD_SET(0, DE_CONTROL, LAST_PIXEL, OFF) | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_VALUE(0, DE_CONTROL, ROP, 0x0C); + unsigned long DeltaX; + unsigned long DeltaY; + + /* Calculate delta X */ + if (nX1 <= nX2) + DeltaX = nX2 - nX1; + else { + DeltaX = nX1 - nX2; + nCommand = FIELD_SET(nCommand, DE_CONTROL, STEP_X, NEGATIVE); + } + + /* Calculate delta Y */ + if (nY1 <= nY2) + DeltaY = nY2 - nY1; + else { + DeltaY = nY1 - nY2; + nCommand = FIELD_SET(nCommand, DE_CONTROL, STEP_Y, NEGATIVE); + } + + /* Determine the major axis */ + if (DeltaX < DeltaY) + nCommand = FIELD_SET(nCommand, DE_CONTROL, MAJOR, Y); + + /* Vertical line? */ + if (nX1 == nX2) + deVerticalLine(dst_base, dst_pitch, nX1, nY1, DeltaY, nColor); + + /* Horizontal line? */ + else if (nY1 == nY2) + deHorizontalLine(dst_base, dst_pitch, nX1, nY1, \ + DeltaX, nColor); + + /* Diagonal line? */ + else if (DeltaX == DeltaY) { + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, + ADDRESS, dst_base)); + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, 1) | + FIELD_VALUE(0, DE_DESTINATION, Y, nY1)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, 1) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, DeltaX)); + + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(nCommand, DE_CONTROL, COMMAND, + SHORT_STROKE)); + } + + /* Generic line */ + else { + unsigned int k1, k2, et, w; + if (DeltaX < DeltaY) { + k1 = 2 * DeltaX; + et = k1 - DeltaY; + k2 = et - DeltaY; + w = DeltaY + 1; + } else { + k1 = 2 * DeltaY; + et = k1 - DeltaX; + k2 = et - DeltaX; + w = DeltaX + 1; + } + + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, + ADDRESS, dst_base)); + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + + SMTC_write2Dreg(DE_SOURCE, + FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) | + FIELD_VALUE(0, DE_SOURCE, X_K1, k1) | + FIELD_VALUE(0, DE_SOURCE, Y_K2, k2)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, nX1) | + FIELD_VALUE(0, DE_DESTINATION, Y, nY1)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, w) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, et)); + + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(nCommand, DE_CONTROL, COMMAND, + LINE_DRAW)); + } + + smtc_de_busy = 1; +} + +void deFillRect(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long dst_X, + unsigned long dst_Y, + unsigned long dst_width, + unsigned long dst_height, unsigned long nColor) +{ + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS, + dst_base)); + + if (dst_pitch) { + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + } + + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, dst_X) | + FIELD_VALUE(0, DE_DESTINATION, Y, dst_Y)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, dst_width) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, dst_height)); + + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(0, DE_CONTROL, STATUS, START) | + FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT) | + FIELD_SET(0, DE_CONTROL, LAST_PIXEL, OFF) | + FIELD_SET(0, DE_CONTROL, COMMAND, RECTANGLE_FILL) | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_VALUE(0, DE_CONTROL, ROP, 0x0C)); + + smtc_de_busy = 1; +} + +/********************************************************************** + * + * deRotatePattern + * + * Purpose + * Rotate the given pattern if necessary + * + * Parameters + * [in] + * pPattern - Pointer to DE_SURFACE structure containing + * pattern attributes + * patternX - X position (0-7) of pattern origin + * patternY - Y position (0-7) of pattern origin + * + * [out] + * pattern_dstaddr - Pointer to pre-allocated buffer containing + * rotated pattern + * + **********************************************************************/ +void deRotatePattern(unsigned char *pattern_dstaddr, + unsigned long pattern_src_addr, + unsigned long pattern_BPP, + unsigned long pattern_stride, int patternX, int patternY) +{ + unsigned int i; + unsigned long pattern[PATTERN_WIDTH * PATTERN_HEIGHT]; + unsigned int x, y; + unsigned char *pjPatByte; + + if (pattern_dstaddr != NULL) { + deWaitForNotBusy(); + + if (patternX || patternY) { + /* Rotate pattern */ + pjPatByte = (unsigned char *)pattern; + + switch (pattern_BPP) { + case 8: + { + for (y = 0; y < 8; y++) { + unsigned char *pjBuffer = + pattern_dstaddr + + ((patternY + y) & 7) * 8; + for (x = 0; x < 8; x++) { + pjBuffer[(patternX + + x) & 7] = + pjPatByte[x]; + } + pjPatByte += pattern_stride; + } + break; + } + + case 16: + { + for (y = 0; y < 8; y++) { + unsigned short *pjBuffer = + (unsigned short *) + pattern_dstaddr + + ((patternY + y) & 7) * 8; + for (x = 0; x < 8; x++) { + pjBuffer[(patternX + + x) & 7] = + ((unsigned short *) + pjPatByte)[x]; + } + pjPatByte += pattern_stride; + } + break; + } + + case 32: + { + for (y = 0; y < 8; y++) { + unsigned long *pjBuffer = + (unsigned long *) + pattern_dstaddr + + ((patternY + y) & 7) * 8; + for (x = 0; x < 8; x++) { + pjBuffer[(patternX + + x) & 7] = + ((unsigned long *) + pjPatByte)[x]; + } + pjPatByte += pattern_stride; + } + break; + } + } + } else { + /*Don't rotate,just copy pattern into pattern_dstaddr*/ + for (i = 0; i < (pattern_BPP * 2); i++) { + ((unsigned long *)pattern_dstaddr)[i] = + pattern[i]; + } + } + + } +} + +/********************************************************************** + * + * deCopy + * + * Purpose + * Copy a rectangular area of the source surface to a destination surface + * + * Remarks + * Source bitmap must have the same color depth (BPP) as the destination + * bitmap. + * +**********************************************************************/ +void deCopy(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long dst_BPP, + unsigned long dst_X, + unsigned long dst_Y, + unsigned long dst_width, + unsigned long dst_height, + unsigned long src_base, + unsigned long src_pitch, + unsigned long src_X, + unsigned long src_Y, pTransparent pTransp, unsigned char nROP2) +{ + unsigned long nDirection = 0; + unsigned long nTransparent = 0; + /* Direction of ROP2 operation: + * 1 = Left to Right, + * (-1) = Right to Left + */ + unsigned long opSign = 1; + /* xWidth is in pixels */ + unsigned long xWidth = 192 / (dst_BPP / 8); + unsigned long de_ctrl = 0; + + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS, + dst_base)); + + SMTC_write2Dreg(DE_WINDOW_SOURCE_BASE, + FIELD_VALUE(0, DE_WINDOW_SOURCE_BASE, ADDRESS, + src_base)); + + if (dst_pitch && src_pitch) { + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + src_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + src_pitch)); + } + + /* Set transparent bits if necessary */ + if (pTransp != NULL) { + nTransparent = + pTransp->match | pTransp->select | pTransp->control; + + /* Set color compare register */ + SMTC_write2Dreg(DE_COLOR_COMPARE, + FIELD_VALUE(0, DE_COLOR_COMPARE, COLOR, + pTransp->color)); + } + + /* Determine direction of operation */ + if (src_Y < dst_Y) { + /* +----------+ + |S | + | +----------+ + | | | | + | | | | + +---|------+ | + | D | + +----------+ */ + + nDirection = BOTTOM_TO_TOP; + } else if (src_Y > dst_Y) { + /* +----------+ + |D | + | +----------+ + | | | | + | | | | + +---|------+ | + | S | + +----------+ */ + + nDirection = TOP_TO_BOTTOM; + } else { + /* src_Y == dst_Y */ + + if (src_X <= dst_X) { + /* +------+---+------+ + |S | | D| + | | | | + | | | | + | | | | + +------+---+------+ */ + + nDirection = RIGHT_TO_LEFT; + } else { + /* src_X > dst_X */ + + /* +------+---+------+ + |D | | S| + | | | | + | | | | + | | | | + +------+---+------+ */ + + nDirection = LEFT_TO_RIGHT; + } + } + + if ((nDirection == BOTTOM_TO_TOP) || (nDirection == RIGHT_TO_LEFT)) { + src_X += dst_width - 1; + src_Y += dst_height - 1; + dst_X += dst_width - 1; + dst_Y += dst_height - 1; + opSign = (-1); + } + + if (dst_BPP >= 24) { + src_X *= 3; + src_Y *= 3; + dst_X *= 3; + dst_Y *= 3; + dst_width *= 3; + if ((nDirection == BOTTOM_TO_TOP) + || (nDirection == RIGHT_TO_LEFT)) { + src_X += 2; + dst_X += 2; + } + } + + /* Workaround for 192 byte hw bug */ + if ((nROP2 != 0x0C) && ((dst_width * (dst_BPP / 8)) >= 192)) { + /* + * Perform the ROP2 operation in chunks of (xWidth * + * dst_height) + */ + while (1) { + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_SOURCE, + FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) | + FIELD_VALUE(0, DE_SOURCE, X_K1, src_X) | + FIELD_VALUE(0, DE_SOURCE, Y_K2, src_Y)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, + DISABLE) | FIELD_VALUE(0, + DE_DESTINATION, + X, + dst_X) + | FIELD_VALUE(0, DE_DESTINATION, Y, + dst_Y)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, + xWidth) | FIELD_VALUE(0, + DE_DIMENSION, + Y_ET, + dst_height)); + + de_ctrl = + FIELD_VALUE(0, DE_CONTROL, ROP, + nROP2) | nTransparent | FIELD_SET(0, + DE_CONTROL, + ROP_SELECT, + ROP2) + | FIELD_SET(0, DE_CONTROL, COMMAND, + BITBLT) | ((nDirection == + 1) ? FIELD_SET(0, + DE_CONTROL, + DIRECTION, + RIGHT_TO_LEFT) + : FIELD_SET(0, DE_CONTROL, + DIRECTION, + LEFT_TO_RIGHT)) | + FIELD_SET(0, DE_CONTROL, STATUS, START); + + SMTC_write2Dreg(DE_CONTROL, de_ctrl); + + src_X += (opSign * xWidth); + dst_X += (opSign * xWidth); + dst_width -= xWidth; + + if (dst_width <= 0) { + /* ROP2 operation is complete */ + break; + } + + if (xWidth > dst_width) + xWidth = dst_width; + } + } else { + deWaitForNotBusy(); + SMTC_write2Dreg(DE_SOURCE, + FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) | + FIELD_VALUE(0, DE_SOURCE, X_K1, src_X) | + FIELD_VALUE(0, DE_SOURCE, Y_K2, src_Y)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, dst_X) | + FIELD_VALUE(0, DE_DESTINATION, Y, dst_Y)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, dst_width) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, dst_height)); + + de_ctrl = FIELD_VALUE(0, DE_CONTROL, ROP, nROP2) | + nTransparent | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_SET(0, DE_CONTROL, COMMAND, BITBLT) | + ((nDirection == 1) ? FIELD_SET(0, DE_CONTROL, DIRECTION, + RIGHT_TO_LEFT) + : FIELD_SET(0, DE_CONTROL, DIRECTION, + LEFT_TO_RIGHT)) | FIELD_SET(0, DE_CONTROL, + STATUS, START); + SMTC_write2Dreg(DE_CONTROL, de_ctrl); + } + + smtc_de_busy = 1; +} + +/* + * This function sets the pixel format that will apply to the 2D Engine. + */ +void deSetPixelFormat(unsigned long bpp) +{ + unsigned long de_format; + + de_format = SMTC_read2Dreg(DE_STRETCH_FORMAT); + + switch (bpp) { + case 8: + de_format = + FIELD_SET(de_format, DE_STRETCH_FORMAT, PIXEL_FORMAT, 8); + break; + default: + case 16: + de_format = + FIELD_SET(de_format, DE_STRETCH_FORMAT, PIXEL_FORMAT, 16); + break; + case 32: + de_format = + FIELD_SET(de_format, DE_STRETCH_FORMAT, PIXEL_FORMAT, 32); + break; + } + + SMTC_write2Dreg(DE_STRETCH_FORMAT, de_format); +} + +/* + * System memory to Video memory monochrome expansion. + * + * Source is monochrome image in system memory. This function expands the + * monochrome data to color image in video memory. + */ + +long deSystemMem2VideoMemMonoBlt(const char *pSrcbuf, + long srcDelta, + unsigned long startBit, + unsigned long dBase, + unsigned long dPitch, + unsigned long bpp, + unsigned long dx, unsigned long dy, + unsigned long width, unsigned long height, + unsigned long fColor, + unsigned long bColor, + unsigned long rop2) { + unsigned long bytePerPixel; + unsigned long ulBytesPerScan; + unsigned long ul4BytesPerScan; + unsigned long ulBytesRemain; + unsigned long de_ctrl = 0; + unsigned char ajRemain[4]; + long i, j; + + bytePerPixel = bpp / 8; + + /* Just make sure the start bit is within legal range */ + startBit &= 7; + + ulBytesPerScan = (width + startBit + 7) / 8; + ul4BytesPerScan = ulBytesPerScan & ~3; + ulBytesRemain = ulBytesPerScan & 3; + + if (smtc_de_busy) + deWaitForNotBusy(); + + /* + * 2D Source Base. Use 0 for HOST Blt. + */ + + SMTC_write2Dreg(DE_WINDOW_SOURCE_BASE, 0); + + /* + * 2D Destination Base. + * + * It is an address offset (128 bit aligned) from the beginning of + * frame buffer. + */ + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, dBase); + + if (dPitch) { + + /* + * Program pitch (distance between the 1st points of two + * adjacent lines). + * + * Note that input pitch is BYTE value, but the 2D Pitch + * register uses pixel values. Need Byte to pixel convertion. + */ + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dPitch / + bytePerPixel) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + dPitch / + bytePerPixel)); + + /* Screen Window width in Pixels. + * + * 2D engine uses this value to calculate the linear address in + * frame buffer for a given point. + */ + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + (dPitch / + bytePerPixel)) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + (dPitch + / + bytePerPixel))); + } + /* Note: For 2D Source in Host Write, only X_K1 field is needed, and + * Y_K2 field is not used. For mono bitmap, use startBit for X_K1. + */ + + SMTC_write2Dreg(DE_SOURCE, + FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) | + FIELD_VALUE(0, DE_SOURCE, X_K1, startBit) | + FIELD_VALUE(0, DE_SOURCE, Y_K2, 0)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, dx) | + FIELD_VALUE(0, DE_DESTINATION, Y, dy)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, width) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); + + SMTC_write2Dreg(DE_FOREGROUND, fColor); + SMTC_write2Dreg(DE_BACKGROUND, bColor); + + if (bpp) + deSetPixelFormat(bpp); + /* Set the pixel format of the destination */ + + de_ctrl = FIELD_VALUE(0, DE_CONTROL, ROP, rop2) | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_SET(0, DE_CONTROL, COMMAND, HOST_WRITE) | + FIELD_SET(0, DE_CONTROL, HOST, MONO) | + FIELD_SET(0, DE_CONTROL, STATUS, START); + + SMTC_write2Dreg(DE_CONTROL, de_ctrl | deGetTransparency()); + + /* Write MONO data (line by line) to 2D Engine data port */ + for (i = 0; i < height; i++) { + /* For each line, send the data in chunks of 4 bytes */ + for (j = 0; j < (ul4BytesPerScan / 4); j++) + SMTC_write2Ddataport(0, + *(unsigned long *)(pSrcbuf + + (j * 4))); + + if (ulBytesRemain) { + memcpy(ajRemain, pSrcbuf + ul4BytesPerScan, + ulBytesRemain); + SMTC_write2Ddataport(0, *(unsigned long *)ajRemain); + } + + pSrcbuf += srcDelta; + } + smtc_de_busy = 1; + + return 0; +} + +/* + * This function gets the transparency status from DE_CONTROL register. + * It returns a double word with the transparent fields properly set, + * while other fields are 0. + */ +unsigned long deGetTransparency(void) +{ + unsigned long de_ctrl; + + de_ctrl = SMTC_read2Dreg(DE_CONTROL); + + de_ctrl &= + FIELD_MASK(DE_CONTROL_TRANSPARENCY_MATCH) | + FIELD_MASK(DE_CONTROL_TRANSPARENCY_SELECT) | + FIELD_MASK(DE_CONTROL_TRANSPARENCY); + + return de_ctrl; +} diff --git a/drivers/staging/sm7xx/smtc2d.h b/drivers/staging/sm7xx/smtc2d.h new file mode 100644 index 000000000000..38d0c335322b --- /dev/null +++ b/drivers/staging/sm7xx/smtc2d.h @@ -0,0 +1,530 @@ +/* + * Silicon Motion SM712 2D drawing engine functions. + * + * Copyright (C) 2006 Silicon Motion Technology Corp. + * Author: Ge Wang, gewang@siliconmotion.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef NULL +#define NULL 0 +#endif + +/* Internal macros */ + +#define _F_START(f) (0 ? f) +#define _F_END(f) (1 ? f) +#define _F_SIZE(f) (1 + _F_END(f) - _F_START(f)) +#define _F_MASK(f) (((1ULL << _F_SIZE(f)) - 1) << _F_START(f)) +#define _F_NORMALIZE(v, f) (((v) & _F_MASK(f)) >> _F_START(f)) +#define _F_DENORMALIZE(v, f) (((v) << _F_START(f)) & _F_MASK(f)) + +/* Global macros */ + +#define FIELD_GET(x, reg, field) \ +( \ + _F_NORMALIZE((x), reg ## _ ## field) \ +) + +#define FIELD_SET(x, reg, field, value) \ +( \ + (x & ~_F_MASK(reg ## _ ## field)) \ + | _F_DENORMALIZE(reg ## _ ## field ## _ ## value, reg ## _ ## field) \ +) + +#define FIELD_VALUE(x, reg, field, value) \ +( \ + (x & ~_F_MASK(reg ## _ ## field)) \ + | _F_DENORMALIZE(value, reg ## _ ## field) \ +) + +#define FIELD_CLEAR(reg, field) \ +( \ + ~_F_MASK(reg ## _ ## field) \ +) + +/* Field Macros */ + +#define FIELD_START(field) (0 ? field) +#define FIELD_END(field) (1 ? field) +#define FIELD_SIZE(field) \ + (1 + FIELD_END(field) - FIELD_START(field)) + +#define FIELD_MASK(field) \ + (((1 << (FIELD_SIZE(field)-1)) \ + | ((1 << (FIELD_SIZE(field)-1)) - 1)) \ + << FIELD_START(field)) + +#define FIELD_NORMALIZE(reg, field) \ + (((reg) & FIELD_MASK(field)) >> FIELD_START(field)) + +#define FIELD_DENORMALIZE(field, value) \ + (((value) << FIELD_START(field)) & FIELD_MASK(field)) + +#define FIELD_INIT(reg, field, value) \ + FIELD_DENORMALIZE(reg ## _ ## field, \ + reg ## _ ## field ## _ ## value) + +#define FIELD_INIT_VAL(reg, field, value) \ + (FIELD_DENORMALIZE(reg ## _ ## field, value)) + +#define FIELD_VAL_SET(x, r, f, v) ({ \ + x = (x & ~FIELD_MASK(r ## _ ## f)) \ + | FIELD_DENORMALIZE(r ## _ ## f, r ## _ ## f ## _ ## v) \ +}) + +#define RGB(r, g, b) ((unsigned long)(((r) << 16) | ((g) << 8) | (b))) + +/* Transparent info definition */ +typedef struct { + unsigned long match; /* Matching pixel is OPAQUE/TRANSPARENT */ + unsigned long select; /* Transparency controlled by SRC/DST */ + unsigned long control; /* ENABLE/DISABLE transparency */ + unsigned long color; /* Transparent color */ +} Transparent, *pTransparent; + +#define PIXEL_DEPTH_1_BP 0 /* 1 bit per pixel */ +#define PIXEL_DEPTH_8_BPP 1 /* 8 bits per pixel */ +#define PIXEL_DEPTH_16_BPP 2 /* 16 bits per pixel */ +#define PIXEL_DEPTH_32_BPP 3 /* 32 bits per pixel */ +#define PIXEL_DEPTH_YUV422 8 /* 16 bits per pixel YUV422 */ +#define PIXEL_DEPTH_YUV420 9 /* 16 bits per pixel YUV420 */ + +#define PATTERN_WIDTH 8 +#define PATTERN_HEIGHT 8 + +#define TOP_TO_BOTTOM 0 +#define BOTTOM_TO_TOP 1 +#define RIGHT_TO_LEFT BOTTOM_TO_TOP +#define LEFT_TO_RIGHT TOP_TO_BOTTOM + +/* Constants used in Transparent structure */ +#define MATCH_OPAQUE 0x00000000 +#define MATCH_TRANSPARENT 0x00000400 +#define SOURCE 0x00000000 +#define DESTINATION 0x00000200 + +/* 2D registers. */ + +#define DE_SOURCE 0x000000 +#define DE_SOURCE_WRAP 31 : 31 +#define DE_SOURCE_WRAP_DISABLE 0 +#define DE_SOURCE_WRAP_ENABLE 1 +#define DE_SOURCE_X_K1 29 : 16 +#define DE_SOURCE_Y_K2 15 : 0 + +#define DE_DESTINATION 0x000004 +#define DE_DESTINATION_WRAP 31 : 31 +#define DE_DESTINATION_WRAP_DISABLE 0 +#define DE_DESTINATION_WRAP_ENABLE 1 +#define DE_DESTINATION_X 28 : 16 +#define DE_DESTINATION_Y 15 : 0 + +#define DE_DIMENSION 0x000008 +#define DE_DIMENSION_X 28 : 16 +#define DE_DIMENSION_Y_ET 15 : 0 + +#define DE_CONTROL 0x00000C +#define DE_CONTROL_STATUS 31 : 31 +#define DE_CONTROL_STATUS_STOP 0 +#define DE_CONTROL_STATUS_START 1 +#define DE_CONTROL_PATTERN 30 : 30 +#define DE_CONTROL_PATTERN_MONO 0 +#define DE_CONTROL_PATTERN_COLOR 1 +#define DE_CONTROL_UPDATE_DESTINATION_X 29 : 29 +#define DE_CONTROL_UPDATE_DESTINATION_X_DISABLE 0 +#define DE_CONTROL_UPDATE_DESTINATION_X_ENABLE 1 +#define DE_CONTROL_QUICK_START 28 : 28 +#define DE_CONTROL_QUICK_START_DISABLE 0 +#define DE_CONTROL_QUICK_START_ENABLE 1 +#define DE_CONTROL_DIRECTION 27 : 27 +#define DE_CONTROL_DIRECTION_LEFT_TO_RIGHT 0 +#define DE_CONTROL_DIRECTION_RIGHT_TO_LEFT 1 +#define DE_CONTROL_MAJOR 26 : 26 +#define DE_CONTROL_MAJOR_X 0 +#define DE_CONTROL_MAJOR_Y 1 +#define DE_CONTROL_STEP_X 25 : 25 +#define DE_CONTROL_STEP_X_POSITIVE 1 +#define DE_CONTROL_STEP_X_NEGATIVE 0 +#define DE_CONTROL_STEP_Y 24 : 24 +#define DE_CONTROL_STEP_Y_POSITIVE 1 +#define DE_CONTROL_STEP_Y_NEGATIVE 0 +#define DE_CONTROL_STRETCH 23 : 23 +#define DE_CONTROL_STRETCH_DISABLE 0 +#define DE_CONTROL_STRETCH_ENABLE 1 +#define DE_CONTROL_HOST 22 : 22 +#define DE_CONTROL_HOST_COLOR 0 +#define DE_CONTROL_HOST_MONO 1 +#define DE_CONTROL_LAST_PIXEL 21 : 21 +#define DE_CONTROL_LAST_PIXEL_OFF 0 +#define DE_CONTROL_LAST_PIXEL_ON 1 +#define DE_CONTROL_COMMAND 20 : 16 +#define DE_CONTROL_COMMAND_BITBLT 0 +#define DE_CONTROL_COMMAND_RECTANGLE_FILL 1 +#define DE_CONTROL_COMMAND_DE_TILE 2 +#define DE_CONTROL_COMMAND_TRAPEZOID_FILL 3 +#define DE_CONTROL_COMMAND_ALPHA_BLEND 4 +#define DE_CONTROL_COMMAND_RLE_STRIP 5 +#define DE_CONTROL_COMMAND_SHORT_STROKE 6 +#define DE_CONTROL_COMMAND_LINE_DRAW 7 +#define DE_CONTROL_COMMAND_HOST_WRITE 8 +#define DE_CONTROL_COMMAND_HOST_READ 9 +#define DE_CONTROL_COMMAND_HOST_WRITE_BOTTOM_UP 10 +#define DE_CONTROL_COMMAND_ROTATE 11 +#define DE_CONTROL_COMMAND_FONT 12 +#define DE_CONTROL_COMMAND_TEXTURE_LOAD 15 +#define DE_CONTROL_ROP_SELECT 15 : 15 +#define DE_CONTROL_ROP_SELECT_ROP3 0 +#define DE_CONTROL_ROP_SELECT_ROP2 1 +#define DE_CONTROL_ROP2_SOURCE 14 : 14 +#define DE_CONTROL_ROP2_SOURCE_BITMAP 0 +#define DE_CONTROL_ROP2_SOURCE_PATTERN 1 +#define DE_CONTROL_MONO_DATA 13 : 12 +#define DE_CONTROL_MONO_DATA_NOT_PACKED 0 +#define DE_CONTROL_MONO_DATA_8_PACKED 1 +#define DE_CONTROL_MONO_DATA_16_PACKED 2 +#define DE_CONTROL_MONO_DATA_32_PACKED 3 +#define DE_CONTROL_REPEAT_ROTATE 11 : 11 +#define DE_CONTROL_REPEAT_ROTATE_DISABLE 0 +#define DE_CONTROL_REPEAT_ROTATE_ENABLE 1 +#define DE_CONTROL_TRANSPARENCY_MATCH 10 : 10 +#define DE_CONTROL_TRANSPARENCY_MATCH_OPAQUE 0 +#define DE_CONTROL_TRANSPARENCY_MATCH_TRANSPARENT 1 +#define DE_CONTROL_TRANSPARENCY_SELECT 9 : 9 +#define DE_CONTROL_TRANSPARENCY_SELECT_SOURCE 0 +#define DE_CONTROL_TRANSPARENCY_SELECT_DESTINATION 1 +#define DE_CONTROL_TRANSPARENCY 8 : 8 +#define DE_CONTROL_TRANSPARENCY_DISABLE 0 +#define DE_CONTROL_TRANSPARENCY_ENABLE 1 +#define DE_CONTROL_ROP 7 : 0 + +/* Pseudo fields. */ + +#define DE_CONTROL_SHORT_STROKE_DIR 27 : 24 +#define DE_CONTROL_SHORT_STROKE_DIR_225 0 +#define DE_CONTROL_SHORT_STROKE_DIR_135 1 +#define DE_CONTROL_SHORT_STROKE_DIR_315 2 +#define DE_CONTROL_SHORT_STROKE_DIR_45 3 +#define DE_CONTROL_SHORT_STROKE_DIR_270 4 +#define DE_CONTROL_SHORT_STROKE_DIR_90 5 +#define DE_CONTROL_SHORT_STROKE_DIR_180 8 +#define DE_CONTROL_SHORT_STROKE_DIR_0 10 +#define DE_CONTROL_ROTATION 25 : 24 +#define DE_CONTROL_ROTATION_0 0 +#define DE_CONTROL_ROTATION_270 1 +#define DE_CONTROL_ROTATION_90 2 +#define DE_CONTROL_ROTATION_180 3 + +#define DE_PITCH 0x000010 +#define DE_PITCH_DESTINATION 28 : 16 +#define DE_PITCH_SOURCE 12 : 0 + +#define DE_FOREGROUND 0x000014 +#define DE_FOREGROUND_COLOR 31 : 0 + +#define DE_BACKGROUND 0x000018 +#define DE_BACKGROUND_COLOR 31 : 0 + +#define DE_STRETCH_FORMAT 0x00001C +#define DE_STRETCH_FORMAT_PATTERN_XY 30 : 30 +#define DE_STRETCH_FORMAT_PATTERN_XY_NORMAL 0 +#define DE_STRETCH_FORMAT_PATTERN_XY_OVERWRITE 1 +#define DE_STRETCH_FORMAT_PATTERN_Y 29 : 27 +#define DE_STRETCH_FORMAT_PATTERN_X 25 : 23 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT 21 : 20 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT_8 0 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT_16 1 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT_24 3 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT_32 2 +#define DE_STRETCH_FORMAT_ADDRESSING 19 : 16 +#define DE_STRETCH_FORMAT_ADDRESSING_XY 0 +#define DE_STRETCH_FORMAT_ADDRESSING_LINEAR 15 +#define DE_STRETCH_FORMAT_SOURCE_HEIGHT 11 : 0 + +#define DE_COLOR_COMPARE 0x000020 +#define DE_COLOR_COMPARE_COLOR 23 : 0 + +#define DE_COLOR_COMPARE_MASK 0x000024 +#define DE_COLOR_COMPARE_MASK_MASKS 23 : 0 + +#define DE_MASKS 0x000028 +#define DE_MASKS_BYTE_MASK 31 : 16 +#define DE_MASKS_BIT_MASK 15 : 0 + +#define DE_CLIP_TL 0x00002C +#define DE_CLIP_TL_TOP 31 : 16 +#define DE_CLIP_TL_STATUS 13 : 13 +#define DE_CLIP_TL_STATUS_DISABLE 0 +#define DE_CLIP_TL_STATUS_ENABLE 1 +#define DE_CLIP_TL_INHIBIT 12 : 12 +#define DE_CLIP_TL_INHIBIT_OUTSIDE 0 +#define DE_CLIP_TL_INHIBIT_INSIDE 1 +#define DE_CLIP_TL_LEFT 11 : 0 + +#define DE_CLIP_BR 0x000030 +#define DE_CLIP_BR_BOTTOM 31 : 16 +#define DE_CLIP_BR_RIGHT 12 : 0 + +#define DE_MONO_PATTERN_LOW 0x000034 +#define DE_MONO_PATTERN_LOW_PATTERN 31 : 0 + +#define DE_MONO_PATTERN_HIGH 0x000038 +#define DE_MONO_PATTERN_HIGH_PATTERN 31 : 0 + +#define DE_WINDOW_WIDTH 0x00003C +#define DE_WINDOW_WIDTH_DESTINATION 28 : 16 +#define DE_WINDOW_WIDTH_SOURCE 12 : 0 + +#define DE_WINDOW_SOURCE_BASE 0x000040 +#define DE_WINDOW_SOURCE_BASE_EXT 27 : 27 +#define DE_WINDOW_SOURCE_BASE_EXT_LOCAL 0 +#define DE_WINDOW_SOURCE_BASE_EXT_EXTERNAL 1 +#define DE_WINDOW_SOURCE_BASE_CS 26 : 26 +#define DE_WINDOW_SOURCE_BASE_CS_0 0 +#define DE_WINDOW_SOURCE_BASE_CS_1 1 +#define DE_WINDOW_SOURCE_BASE_ADDRESS 25 : 0 + +#define DE_WINDOW_DESTINATION_BASE 0x000044 +#define DE_WINDOW_DESTINATION_BASE_EXT 27 : 27 +#define DE_WINDOW_DESTINATION_BASE_EXT_LOCAL 0 +#define DE_WINDOW_DESTINATION_BASE_EXT_EXTERNAL 1 +#define DE_WINDOW_DESTINATION_BASE_CS 26 : 26 +#define DE_WINDOW_DESTINATION_BASE_CS_0 0 +#define DE_WINDOW_DESTINATION_BASE_CS_1 1 +#define DE_WINDOW_DESTINATION_BASE_ADDRESS 25 : 0 + +#define DE_ALPHA 0x000048 +#define DE_ALPHA_VALUE 7 : 0 + +#define DE_WRAP 0x00004C +#define DE_WRAP_X 31 : 16 +#define DE_WRAP_Y 15 : 0 + +#define DE_STATUS 0x000050 +#define DE_STATUS_CSC 1 : 1 +#define DE_STATUS_CSC_CLEAR 0 +#define DE_STATUS_CSC_NOT_ACTIVE 0 +#define DE_STATUS_CSC_ACTIVE 1 +#define DE_STATUS_2D 0 : 0 +#define DE_STATUS_2D_CLEAR 0 +#define DE_STATUS_2D_NOT_ACTIVE 0 +#define DE_STATUS_2D_ACTIVE 1 + +/* Color Space Conversion registers. */ + +#define CSC_Y_SOURCE_BASE 0x0000C8 +#define CSC_Y_SOURCE_BASE_EXT 27 : 27 +#define CSC_Y_SOURCE_BASE_EXT_LOCAL 0 +#define CSC_Y_SOURCE_BASE_EXT_EXTERNAL 1 +#define CSC_Y_SOURCE_BASE_CS 26 : 26 +#define CSC_Y_SOURCE_BASE_CS_0 0 +#define CSC_Y_SOURCE_BASE_CS_1 1 +#define CSC_Y_SOURCE_BASE_ADDRESS 25 : 0 + +#define CSC_CONSTANTS 0x0000CC +#define CSC_CONSTANTS_Y 31 : 24 +#define CSC_CONSTANTS_R 23 : 16 +#define CSC_CONSTANTS_G 15 : 8 +#define CSC_CONSTANTS_B 7 : 0 + +#define CSC_Y_SOURCE_X 0x0000D0 +#define CSC_Y_SOURCE_X_INTEGER 26 : 16 +#define CSC_Y_SOURCE_X_FRACTION 15 : 3 + +#define CSC_Y_SOURCE_Y 0x0000D4 +#define CSC_Y_SOURCE_Y_INTEGER 27 : 16 +#define CSC_Y_SOURCE_Y_FRACTION 15 : 3 + +#define CSC_U_SOURCE_BASE 0x0000D8 +#define CSC_U_SOURCE_BASE_EXT 27 : 27 +#define CSC_U_SOURCE_BASE_EXT_LOCAL 0 +#define CSC_U_SOURCE_BASE_EXT_EXTERNAL 1 +#define CSC_U_SOURCE_BASE_CS 26 : 26 +#define CSC_U_SOURCE_BASE_CS_0 0 +#define CSC_U_SOURCE_BASE_CS_1 1 +#define CSC_U_SOURCE_BASE_ADDRESS 25 : 0 + +#define CSC_V_SOURCE_BASE 0x0000DC +#define CSC_V_SOURCE_BASE_EXT 27 : 27 +#define CSC_V_SOURCE_BASE_EXT_LOCAL 0 +#define CSC_V_SOURCE_BASE_EXT_EXTERNAL 1 +#define CSC_V_SOURCE_BASE_CS 26 : 26 +#define CSC_V_SOURCE_BASE_CS_0 0 +#define CSC_V_SOURCE_BASE_CS_1 1 +#define CSC_V_SOURCE_BASE_ADDRESS 25 : 0 + +#define CSC_SOURCE_DIMENSION 0x0000E0 +#define CSC_SOURCE_DIMENSION_X 31 : 16 +#define CSC_SOURCE_DIMENSION_Y 15 : 0 + +#define CSC_SOURCE_PITCH 0x0000E4 +#define CSC_SOURCE_PITCH_Y 31 : 16 +#define CSC_SOURCE_PITCH_UV 15 : 0 + +#define CSC_DESTINATION 0x0000E8 +#define CSC_DESTINATION_WRAP 31 : 31 +#define CSC_DESTINATION_WRAP_DISABLE 0 +#define CSC_DESTINATION_WRAP_ENABLE 1 +#define CSC_DESTINATION_X 27 : 16 +#define CSC_DESTINATION_Y 11 : 0 + +#define CSC_DESTINATION_DIMENSION 0x0000EC +#define CSC_DESTINATION_DIMENSION_X 31 : 16 +#define CSC_DESTINATION_DIMENSION_Y 15 : 0 + +#define CSC_DESTINATION_PITCH 0x0000F0 +#define CSC_DESTINATION_PITCH_X 31 : 16 +#define CSC_DESTINATION_PITCH_Y 15 : 0 + +#define CSC_SCALE_FACTOR 0x0000F4 +#define CSC_SCALE_FACTOR_HORIZONTAL 31 : 16 +#define CSC_SCALE_FACTOR_VERTICAL 15 : 0 + +#define CSC_DESTINATION_BASE 0x0000F8 +#define CSC_DESTINATION_BASE_EXT 27 : 27 +#define CSC_DESTINATION_BASE_EXT_LOCAL 0 +#define CSC_DESTINATION_BASE_EXT_EXTERNAL 1 +#define CSC_DESTINATION_BASE_CS 26 : 26 +#define CSC_DESTINATION_BASE_CS_0 0 +#define CSC_DESTINATION_BASE_CS_1 1 +#define CSC_DESTINATION_BASE_ADDRESS 25 : 0 + +#define CSC_CONTROL 0x0000FC +#define CSC_CONTROL_STATUS 31 : 31 +#define CSC_CONTROL_STATUS_STOP 0 +#define CSC_CONTROL_STATUS_START 1 +#define CSC_CONTROL_SOURCE_FORMAT 30 : 28 +#define CSC_CONTROL_SOURCE_FORMAT_YUV422 0 +#define CSC_CONTROL_SOURCE_FORMAT_YUV420I 1 +#define CSC_CONTROL_SOURCE_FORMAT_YUV420 2 +#define CSC_CONTROL_SOURCE_FORMAT_YVU9 3 +#define CSC_CONTROL_SOURCE_FORMAT_IYU1 4 +#define CSC_CONTROL_SOURCE_FORMAT_IYU2 5 +#define CSC_CONTROL_SOURCE_FORMAT_RGB565 6 +#define CSC_CONTROL_SOURCE_FORMAT_RGB8888 7 +#define CSC_CONTROL_DESTINATION_FORMAT 27 : 26 +#define CSC_CONTROL_DESTINATION_FORMAT_RGB565 0 +#define CSC_CONTROL_DESTINATION_FORMAT_RGB8888 1 +#define CSC_CONTROL_HORIZONTAL_FILTER 25 : 25 +#define CSC_CONTROL_HORIZONTAL_FILTER_DISABLE 0 +#define CSC_CONTROL_HORIZONTAL_FILTER_ENABLE 1 +#define CSC_CONTROL_VERTICAL_FILTER 24 : 24 +#define CSC_CONTROL_VERTICAL_FILTER_DISABLE 0 +#define CSC_CONTROL_VERTICAL_FILTER_ENABLE 1 +#define CSC_CONTROL_BYTE_ORDER 23 : 23 +#define CSC_CONTROL_BYTE_ORDER_YUYV 0 +#define CSC_CONTROL_BYTE_ORDER_UYVY 1 + +#define DE_DATA_PORT_501 0x110000 +#define DE_DATA_PORT_712 0x400000 +#define DE_DATA_PORT_722 0x6000 + +/* point to virtual Memory Map IO starting address */ +extern char *smtc_RegBaseAddress; +/* point to virtual video memory starting address */ +extern char *smtc_VRAMBaseAddress; +extern unsigned char smtc_de_busy; + +extern unsigned long memRead32(unsigned long nOffset); +extern void memWrite32(unsigned long nOffset, unsigned long nData); +extern unsigned long SMTC_read2Dreg(unsigned long nOffset); + +/* 2D functions */ +extern void deInit(unsigned int nModeWidth, unsigned int nModeHeight, + unsigned int bpp); + +extern void deWaitForNotBusy(void); + +extern void deVerticalLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX, + unsigned long nY, + unsigned long dst_height, + unsigned long nColor); + +extern void deHorizontalLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX, + unsigned long nY, + unsigned long dst_width, + unsigned long nColor); + +extern void deLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX1, + unsigned long nY1, + unsigned long nX2, + unsigned long nY2, + unsigned long nColor); + +extern void deFillRect(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long dst_X, + unsigned long dst_Y, + unsigned long dst_width, + unsigned long dst_height, + unsigned long nColor); + +extern void deRotatePattern(unsigned char *pattern_dstaddr, + unsigned long pattern_src_addr, + unsigned long pattern_BPP, + unsigned long pattern_stride, + int patternX, + int patternY); + +extern void deCopy(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long dst_BPP, + unsigned long dst_X, + unsigned long dst_Y, + unsigned long dst_width, + unsigned long dst_height, + unsigned long src_base, + unsigned long src_pitch, + unsigned long src_X, + unsigned long src_Y, + pTransparent pTransp, + unsigned char nROP2); + +/* + * System memory to Video memory monochrome expansion. + * + * Source is monochrome image in system memory. This function expands the + * monochrome data to color image in video memory. + * + * @pSrcbuf: pointer to start of source buffer in system memory + * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top + * down and -ive mean button up + * @startBit: Mono data can start at any bit in a byte, this value should + * be 0 to 7 + * @dBase: Address of destination : offset in frame buffer + * @dPitch: Pitch value of destination surface in BYTE + * @bpp: Color depth of destination surface + * @dx, dy: Starting coordinate of destination surface + * @width, height: width and height of rectange in pixel value + * @fColor,bColor: Foreground, Background color (corresponding to a 1, 0 in + * the monochrome data) + * @rop2: ROP value + */ + +extern long deSystemMem2VideoMemMonoBlt( + const char *pSrcbuf, + long srcDelta, + unsigned long startBit, + unsigned long dBase, + unsigned long dPitch, + unsigned long bpp, + unsigned long dx, unsigned long dy, + unsigned long width, unsigned long height, + unsigned long fColor, + unsigned long bColor, + unsigned long rop2); + +extern unsigned long deGetTransparency(void); +extern void deSetPixelFormat(unsigned long bpp); diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c new file mode 100644 index 000000000000..161dbc9c1397 --- /dev/null +++ b/drivers/staging/sm7xx/smtcfb.c @@ -0,0 +1,1253 @@ +/* + * Silicon Motion SM7XX frame buffer device + * + * Copyright (C) 2006 Silicon Motion Technology Corp. + * Authors: Ge Wang, gewang@siliconmotion.com + * Boyod boyod.yang@siliconmotion.com.cn + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Version 0.10.26192.21.01 + * - Add PowerPC/Big endian support + * - Add 2D support for Lynx + * - Verified on2.6.19.2 Boyod.yang + * + * Version 0.09.2621.00.01 + * - Only support Linux Kernel's version 2.6.21. + * Boyod.yang + * + * Version 0.09 + * - Only support Linux Kernel's version 2.6.12. + * Boyod.yang + */ + +#ifndef __KERNEL__ +#define __KERNEL__ +#endif + +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PM +#include +#endif + +struct screen_info smtc_screen_info; + +#include "smtcfb.h" +#include "smtc2d.h" + +#ifdef DEBUG +#define smdbg(format, arg...) printk(KERN_DEBUG format , ## arg) +#else +#define smdbg(format, arg...) +#endif + +/* +* Private structure +*/ +struct smtcfb_info { + /* + * The following is a pointer to be passed into the + * functions below. The modules outside the main + * voyager.c driver have no knowledge as to what + * is within this structure. + */ + struct fb_info fb; + struct display_switch *dispsw; + struct pci_dev *dev; + signed int currcon; + + struct { + u8 red, green, blue; + } palette[NR_RGB]; + + u_int palette_size; +}; + +struct par_info { + /* + * Hardware + */ + u16 chipID; + unsigned char __iomem *m_pMMIO; + char __iomem *m_pLFB; + char *m_pDPR; + char *m_pVPR; + char *m_pCPR; + + u_int width; + u_int height; + u_int hz; + u_long BaseAddressInVRAM; + u8 chipRevID; +}; + +struct vesa_mode_table { + char mode_index[6]; + u16 lfb_width; + u16 lfb_height; + u16 lfb_depth; +}; + +static struct vesa_mode_table vesa_mode[] = { + {"0x301", 640, 480, 8}, + {"0x303", 800, 600, 8}, + {"0x305", 1024, 768, 8}, + {"0x307", 1280, 1024, 8}, + + {"0x311", 640, 480, 16}, + {"0x314", 800, 600, 16}, + {"0x317", 1024, 768, 16}, + {"0x31A", 1280, 1024, 16}, + + {"0x312", 640, 480, 24}, + {"0x315", 800, 600, 24}, + {"0x318", 1024, 768, 24}, + {"0x31B", 1280, 1024, 24}, +}; + +char __iomem *smtc_RegBaseAddress; /* Memory Map IO starting address */ +char __iomem *smtc_VRAMBaseAddress; /* video memory starting address */ + +char *smtc_2DBaseAddress; /* 2D engine starting address */ +char *smtc_2Ddataport; /* 2D data port offset */ +short smtc_2Dacceleration; + +static u32 colreg[17]; +static struct par_info hw; /* hardware information */ + +u16 smtc_ChipIDs[] = { + 0x710, + 0x712, + 0x720 +}; + +#define numSMTCchipIDs (sizeof(smtc_ChipIDs) / sizeof(u16)) + +void deWaitForNotBusy(void) +{ + unsigned long i = 0x1000000; + while (i--) { + if ((smtc_seqr(0x16) & 0x18) == 0x10) + break; + } + smtc_de_busy = 0; +} + +static void sm712_set_timing(struct smtcfb_info *sfb, + struct par_info *ppar_info) +{ + int i = 0, j = 0; + u32 m_nScreenStride; + + smdbg("\nppar_info->width = %d ppar_info->height = %d" + "sfb->fb.var.bits_per_pixel = %d ppar_info->hz = %d\n", + ppar_info->width, ppar_info->height, + sfb->fb.var.bits_per_pixel, ppar_info->hz); + + for (j = 0; j < numVGAModes; j++) { + if (VGAMode[j].mmSizeX == ppar_info->width && + VGAMode[j].mmSizeY == ppar_info->height && + VGAMode[j].bpp == sfb->fb.var.bits_per_pixel && + VGAMode[j].hz == ppar_info->hz) { + + smdbg("\nVGAMode[j].mmSizeX = %d VGAMode[j].mmSizeY =" + "%d VGAMode[j].bpp = %d" + "VGAMode[j].hz=%d\n", + VGAMode[j].mmSizeX, VGAMode[j].mmSizeY, + VGAMode[j].bpp, VGAMode[j].hz); + + smdbg("VGAMode index=%d\n", j); + + smtc_mmiowb(0x0, 0x3c6); + + smtc_seqw(0, 0x1); + + smtc_mmiowb(VGAMode[j].Init_MISC, 0x3c2); + + /* init SEQ register SR00 - SR04 */ + for (i = 0; i < SIZE_SR00_SR04; i++) + smtc_seqw(i, VGAMode[j].Init_SR00_SR04[i]); + + /* init SEQ register SR10 - SR24 */ + for (i = 0; i < SIZE_SR10_SR24; i++) + smtc_seqw(i + 0x10, + VGAMode[j].Init_SR10_SR24[i]); + + /* init SEQ register SR30 - SR75 */ + for (i = 0; i < SIZE_SR30_SR75; i++) + if (((i + 0x30) != 0x62) \ + && ((i + 0x30) != 0x6a) \ + && ((i + 0x30) != 0x6b)) + smtc_seqw(i + 0x30, + VGAMode[j].Init_SR30_SR75[i]); + + /* init SEQ register SR80 - SR93 */ + for (i = 0; i < SIZE_SR80_SR93; i++) + smtc_seqw(i + 0x80, + VGAMode[j].Init_SR80_SR93[i]); + + /* init SEQ register SRA0 - SRAF */ + for (i = 0; i < SIZE_SRA0_SRAF; i++) + smtc_seqw(i + 0xa0, + VGAMode[j].Init_SRA0_SRAF[i]); + + /* init Graphic register GR00 - GR08 */ + for (i = 0; i < SIZE_GR00_GR08; i++) + smtc_grphw(i, VGAMode[j].Init_GR00_GR08[i]); + + /* init Attribute register AR00 - AR14 */ + for (i = 0; i < SIZE_AR00_AR14; i++) + smtc_attrw(i, VGAMode[j].Init_AR00_AR14[i]); + + /* init CRTC register CR00 - CR18 */ + for (i = 0; i < SIZE_CR00_CR18; i++) + smtc_crtcw(i, VGAMode[j].Init_CR00_CR18[i]); + + /* init CRTC register CR30 - CR4D */ + for (i = 0; i < SIZE_CR30_CR4D; i++) + smtc_crtcw(i + 0x30, + VGAMode[j].Init_CR30_CR4D[i]); + + /* init CRTC register CR90 - CRA7 */ + for (i = 0; i < SIZE_CR90_CRA7; i++) + smtc_crtcw(i + 0x90, + VGAMode[j].Init_CR90_CRA7[i]); + } + } + smtc_mmiowb(0x67, 0x3c2); + + /* set VPR registers */ + writel(0x0, ppar_info->m_pVPR + 0x0C); + writel(0x0, ppar_info->m_pVPR + 0x40); + + /* set data width */ + m_nScreenStride = + (ppar_info->width * sfb->fb.var.bits_per_pixel) / 64; + switch (sfb->fb.var.bits_per_pixel) { + case 8: + writel(0x0, ppar_info->m_pVPR + 0x0); + break; + case 16: + writel(0x00020000, ppar_info->m_pVPR + 0x0); + break; + case 24: + writel(0x00040000, ppar_info->m_pVPR + 0x0); + break; + case 32: + writel(0x00030000, ppar_info->m_pVPR + 0x0); + break; + } + writel((u32) (((m_nScreenStride + 2) << 16) | m_nScreenStride), + ppar_info->m_pVPR + 0x10); + +} + +static void sm712_setpalette(int regno, unsigned red, unsigned green, + unsigned blue, struct fb_info *info) +{ + struct par_info *cur_par = (struct par_info *)info->par; + + if (cur_par->BaseAddressInVRAM) + /* + * second display palette for dual head. Enable CRT RAM, 6-bit + * RAM + */ + smtc_seqw(0x66, (smtc_seqr(0x66) & 0xC3) | 0x20); + else + /* primary display palette. Enable LCD RAM only, 6-bit RAM */ + smtc_seqw(0x66, (smtc_seqr(0x66) & 0xC3) | 0x10); + smtc_mmiowb(regno, dac_reg); + smtc_mmiowb(red >> 10, dac_val); + smtc_mmiowb(green >> 10, dac_val); + smtc_mmiowb(blue >> 10, dac_val); +} + +static void smtc_set_timing(struct smtcfb_info *sfb, struct par_info + *ppar_info) +{ + switch (ppar_info->chipID) { + case 0x710: + case 0x712: + case 0x720: + sm712_set_timing(sfb, ppar_info); + break; + } +} + +static struct fb_var_screeninfo smtcfb_var = { + .xres = 1024, + .yres = 600, + .xres_virtual = 1024, + .yres_virtual = 600, + .bits_per_pixel = 16, + .red = {16, 8, 0}, + .green = {8, 8, 0}, + .blue = {0, 8, 0}, + .activate = FB_ACTIVATE_NOW, + .height = -1, + .width = -1, + .vmode = FB_VMODE_NONINTERLACED, +}; + +static struct fb_fix_screeninfo smtcfb_fix = { + .id = "sm712fb", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_TRUECOLOR, + .line_length = 800 * 3, + .accel = FB_ACCEL_SMI_LYNX, +}; + +/* chan_to_field + * + * convert a colour value into a field position + * + * from pxafb.c + */ + +static inline unsigned int chan_to_field(unsigned int chan, + struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int smtcfb_blank(int blank_mode, struct fb_info *info) +{ + /* clear DPMS setting */ + switch (blank_mode) { + case FB_BLANK_UNBLANK: + /* Screen On: HSync: On, VSync : On */ + smtc_seqw(0x01, (smtc_seqr(0x01) & (~0x20))); + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x21, (smtc_seqr(0x21) & 0x77)); + smtc_seqw(0x22, (smtc_seqr(0x22) & (~0x30))); + smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0))); + smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01)); + smtc_seqw(0x31, (smtc_seqr(0x31) | 0x03)); + break; + case FB_BLANK_NORMAL: + /* Screen Off: HSync: On, VSync : On Soft blank */ + smtc_seqw(0x01, (smtc_seqr(0x01) & (~0x20))); + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x22, (smtc_seqr(0x22) & (~0x30))); + smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0))); + smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01)); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + break; + case FB_BLANK_VSYNC_SUSPEND: + /* Screen On: HSync: On, VSync : Off */ + smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20)); + smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); + smtc_seqw(0x6a, 0x0c); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88)); + smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x20)); + smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0x20)); + smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80)); + break; + case FB_BLANK_HSYNC_SUSPEND: + /* Screen On: HSync: Off, VSync : On */ + smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20)); + smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); + smtc_seqw(0x6a, 0x0c); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88)); + smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x10)); + smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8)); + smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80)); + break; + case FB_BLANK_POWERDOWN: + /* Screen On: HSync: Off, VSync : Off */ + smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20)); + smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); + smtc_seqw(0x6a, 0x0c); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88)); + smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x30)); + smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8)); + smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80)); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int smtc_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned trans, struct fb_info *info) +{ + struct smtcfb_info *sfb = (struct smtcfb_info *)info; + u32 val; + + if (regno > 255) + return 1; + + switch (sfb->fb.fix.visual) { + case FB_VISUAL_DIRECTCOLOR: + case FB_VISUAL_TRUECOLOR: + /* + * 16/32 bit true-colour, use pseuo-palette for 16 base color + */ + if (regno < 16) { + if (sfb->fb.var.bits_per_pixel == 16) { + u32 *pal = sfb->fb.pseudo_palette; + val = chan_to_field(red, &sfb->fb.var.red); + val |= chan_to_field(green, \ + &sfb->fb.var.green); + val |= chan_to_field(blue, &sfb->fb.var.blue); +#ifdef __BIG_ENDIAN + pal[regno] = + ((red & 0xf800) >> 8) | + ((green & 0xe000) >> 13) | + ((green & 0x1c00) << 3) | + ((blue & 0xf800) >> 3); +#else + pal[regno] = val; +#endif + } else { + u32 *pal = sfb->fb.pseudo_palette; + val = chan_to_field(red, &sfb->fb.var.red); + val |= chan_to_field(green, \ + &sfb->fb.var.green); + val |= chan_to_field(blue, &sfb->fb.var.blue); +#ifdef __BIG_ENDIAN + val = + (val & 0xff00ff00 >> 8) | + (val & 0x00ff00ff << 8); +#endif + pal[regno] = val; + } + } + break; + + case FB_VISUAL_PSEUDOCOLOR: + /* color depth 8 bit */ + sm712_setpalette(regno, red, green, blue, info); + break; + + default: + return 1; /* unknown type */ + } + + return 0; + +} + +#ifdef __BIG_ENDIAN +static ssize_t smtcfb_read(struct fb_info *info, char __user * buf, size_t + count, loff_t *ppos) +{ + unsigned long p = *ppos; + + u32 *buffer, *dst; + u32 __iomem *src; + int c, i, cnt = 0, err = 0; + unsigned long total_size; + + if (!info || !info->screen_base) + return -ENODEV; + + if (info->state != FBINFO_STATE_RUNNING) + return -EPERM; + + total_size = info->screen_size; + + if (total_size == 0) + total_size = info->fix.smem_len; + + if (p >= total_size) + return 0; + + if (count >= total_size) + count = total_size; + + if (count + p > total_size) + count = total_size - p; + + buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + src = (u32 __iomem *) (info->screen_base + p); + + if (info->fbops->fb_sync) + info->fbops->fb_sync(info); + + while (count) { + c = (count > PAGE_SIZE) ? PAGE_SIZE : count; + dst = buffer; + for (i = c >> 2; i--;) { + *dst = fb_readl(src++); + *dst = + (*dst & 0xff00ff00 >> 8) | + (*dst & 0x00ff00ff << 8); + dst++; + } + if (c & 3) { + u8 *dst8 = (u8 *) dst; + u8 __iomem *src8 = (u8 __iomem *) src; + + for (i = c & 3; i--;) { + if (i & 1) { + *dst8++ = fb_readb(++src8); + } else { + *dst8++ = fb_readb(--src8); + src8 += 2; + } + } + src = (u32 __iomem *) src8; + } + + if (copy_to_user(buf, buffer, c)) { + err = -EFAULT; + break; + } + *ppos += c; + buf += c; + cnt += c; + count -= c; + } + + kfree(buffer); + + return (err) ? err : cnt; +} + +static ssize_t +smtcfb_write(struct fb_info *info, const char __user *buf, size_t count, + loff_t *ppos) +{ + unsigned long p = *ppos; + + u32 *buffer, *src; + u32 __iomem *dst; + int c, i, cnt = 0, err = 0; + unsigned long total_size; + + if (!info || !info->screen_base) + return -ENODEV; + + if (info->state != FBINFO_STATE_RUNNING) + return -EPERM; + + total_size = info->screen_size; + + if (total_size == 0) + total_size = info->fix.smem_len; + + if (p > total_size) + return -EFBIG; + + if (count > total_size) { + err = -EFBIG; + count = total_size; + } + + if (count + p > total_size) { + if (!err) + err = -ENOSPC; + + count = total_size - p; + } + + buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + dst = (u32 __iomem *) (info->screen_base + p); + + if (info->fbops->fb_sync) + info->fbops->fb_sync(info); + + while (count) { + c = (count > PAGE_SIZE) ? PAGE_SIZE : count; + src = buffer; + + if (copy_from_user(src, buf, c)) { + err = -EFAULT; + break; + } + + for (i = c >> 2; i--;) { + fb_writel((*src & 0xff00ff00 >> 8) | + (*src & 0x00ff00ff << 8), dst++); + src++; + } + if (c & 3) { + u8 *src8 = (u8 *) src; + u8 __iomem *dst8 = (u8 __iomem *) dst; + + for (i = c & 3; i--;) { + if (i & 1) { + fb_writeb(*src8++, ++dst8); + } else { + fb_writeb(*src8++, --dst8); + dst8 += 2; + } + } + dst = (u32 __iomem *) dst8; + } + + *ppos += c; + buf += c; + cnt += c; + count -= c; + } + + kfree(buffer); + + return (cnt) ? cnt : err; +} +#endif /* ! __BIG_ENDIAN */ + +#include "smtc2d.c" + +void smtcfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) +{ + struct par_info *p = (struct par_info *)info->par; + + if (smtc_2Dacceleration) { + if (!area->width || !area->height) + return; + + deCopy(p->BaseAddressInVRAM, 0, info->var.bits_per_pixel, + area->dx, area->dy, area->width, area->height, + p->BaseAddressInVRAM, 0, area->sx, area->sy, 0, 0xC); + + } else + cfb_copyarea(info, area); +} + +void smtcfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) +{ + struct par_info *p = (struct par_info *)info->par; + + if (smtc_2Dacceleration) { + if (!rect->width || !rect->height) + return; + if (info->var.bits_per_pixel >= 24) + deFillRect(p->BaseAddressInVRAM, 0, rect->dx * 3, + rect->dy * 3, rect->width * 3, rect->height, + rect->color); + else + deFillRect(p->BaseAddressInVRAM, 0, rect->dx, rect->dy, + rect->width, rect->height, rect->color); + } else + cfb_fillrect(info, rect); +} + +void smtcfb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + struct par_info *p = (struct par_info *)info->par; + u32 bg_col = 0, fg_col = 0; + + if ((smtc_2Dacceleration) && (image->depth == 1)) { + if (smtc_de_busy) + deWaitForNotBusy(); + + switch (info->var.bits_per_pixel) { + case 8: + bg_col = image->bg_color; + fg_col = image->fg_color; + break; + case 16: + bg_col = + ((u32 *) (info->pseudo_palette))[image->bg_color]; + fg_col = + ((u32 *) (info->pseudo_palette))[image->fg_color]; + break; + case 32: + bg_col = + ((u32 *) (info->pseudo_palette))[image->bg_color]; + fg_col = + ((u32 *) (info->pseudo_palette))[image->fg_color]; + break; + } + + deSystemMem2VideoMemMonoBlt( + image->data, + image->width / 8, + 0, + p->BaseAddressInVRAM, + 0, + 0, + image->dx, image->dy, + image->width, image->height, + fg_col, bg_col, + 0x0C); + + } else + cfb_imageblit(info, image); +} + +static struct fb_ops smtcfb_ops = { + .owner = THIS_MODULE, + .fb_setcolreg = smtc_setcolreg, + .fb_blank = smtcfb_blank, + .fb_fillrect = smtcfb_fillrect, + .fb_imageblit = smtcfb_imageblit, + .fb_copyarea = smtcfb_copyarea, +#ifdef __BIG_ENDIAN + .fb_read = smtcfb_read, + .fb_write = smtcfb_write, +#endif + +}; + +void smtcfb_setmode(struct smtcfb_info *sfb) +{ + switch (sfb->fb.var.bits_per_pixel) { + case 32: + sfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; + sfb->fb.fix.line_length = sfb->fb.var.xres * 4; + sfb->fb.var.red.length = 8; + sfb->fb.var.green.length = 8; + sfb->fb.var.blue.length = 8; + sfb->fb.var.red.offset = 16; + sfb->fb.var.green.offset = 8; + sfb->fb.var.blue.offset = 0; + + break; + case 8: + sfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; + sfb->fb.fix.line_length = sfb->fb.var.xres; + sfb->fb.var.red.offset = 5; + sfb->fb.var.red.length = 3; + sfb->fb.var.green.offset = 2; + sfb->fb.var.green.length = 3; + sfb->fb.var.blue.offset = 0; + sfb->fb.var.blue.length = 2; + break; + case 24: + sfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; + sfb->fb.fix.line_length = sfb->fb.var.xres * 3; + sfb->fb.var.red.length = 8; + sfb->fb.var.green.length = 8; + sfb->fb.var.blue.length = 8; + + sfb->fb.var.red.offset = 16; + sfb->fb.var.green.offset = 8; + sfb->fb.var.blue.offset = 0; + + break; + case 16: + default: + sfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; + sfb->fb.fix.line_length = sfb->fb.var.xres * 2; + + sfb->fb.var.red.length = 5; + sfb->fb.var.green.length = 6; + sfb->fb.var.blue.length = 5; + + sfb->fb.var.red.offset = 11; + sfb->fb.var.green.offset = 5; + sfb->fb.var.blue.offset = 0; + + break; + } + + hw.width = sfb->fb.var.xres; + hw.height = sfb->fb.var.yres; + hw.hz = 60; + smtc_set_timing(sfb, &hw); + if (smtc_2Dacceleration) { + printk("2D acceleration enabled!\n"); + /* Init smtc drawing engine */ + deInit(sfb->fb.var.xres, sfb->fb.var.yres, + sfb->fb.var.bits_per_pixel); + } +} + +/* + * Alloc struct smtcfb_info and assign the default value + */ +static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *dev, + char *name) +{ + struct smtcfb_info *sfb; + + sfb = kmalloc(sizeof(struct smtcfb_info), GFP_KERNEL); + + if (!sfb) + return NULL; + + memset(sfb, 0, sizeof(struct smtcfb_info)); + + sfb->currcon = -1; + sfb->dev = dev; + + /*** Init sfb->fb with default value ***/ + sfb->fb.flags = FBINFO_FLAG_DEFAULT; + sfb->fb.fbops = &smtcfb_ops; + sfb->fb.var = smtcfb_var; + sfb->fb.fix = smtcfb_fix; + + strcpy(sfb->fb.fix.id, name); + + sfb->fb.fix.type = FB_TYPE_PACKED_PIXELS; + sfb->fb.fix.type_aux = 0; + sfb->fb.fix.xpanstep = 0; + sfb->fb.fix.ypanstep = 0; + sfb->fb.fix.ywrapstep = 0; + sfb->fb.fix.accel = FB_ACCEL_SMI_LYNX; + + sfb->fb.var.nonstd = 0; + sfb->fb.var.activate = FB_ACTIVATE_NOW; + sfb->fb.var.height = -1; + sfb->fb.var.width = -1; + /* text mode acceleration */ + sfb->fb.var.accel_flags = FB_ACCELF_TEXT; + sfb->fb.var.vmode = FB_VMODE_NONINTERLACED; + sfb->fb.par = &hw; + sfb->fb.pseudo_palette = colreg; + + return sfb; +} + +/* + * Unmap in the memory mapped IO registers + */ + +static void smtc_unmap_mmio(struct smtcfb_info *sfb) +{ + if (sfb && smtc_RegBaseAddress) + smtc_RegBaseAddress = NULL; +} + +/* + * Map in the screen memory + */ + +static int smtc_map_smem(struct smtcfb_info *sfb, + struct pci_dev *dev, u_long smem_len) +{ + if (sfb->fb.var.bits_per_pixel == 32) { +#ifdef __BIG_ENDIAN + sfb->fb.fix.smem_start = pci_resource_start(dev, 0) + + 0x800000; +#else + sfb->fb.fix.smem_start = pci_resource_start(dev, 0); +#endif + } else { + sfb->fb.fix.smem_start = pci_resource_start(dev, 0); + } + + sfb->fb.fix.smem_len = smem_len; + + sfb->fb.screen_base = smtc_VRAMBaseAddress; + + if (!sfb->fb.screen_base) { + printk(KERN_INFO "%s: unable to map screen memory\n", + sfb->fb.fix.id); + return -ENOMEM; + } + + return 0; +} + +/* + * Unmap in the screen memory + * + */ +static void smtc_unmap_smem(struct smtcfb_info *sfb) +{ + if (sfb && sfb->fb.screen_base) { + iounmap(sfb->fb.screen_base); + sfb->fb.screen_base = NULL; + } +} + +/* + * We need to wake up the LynxEM+, and make sure its in linear memory mode. + */ +static inline void sm7xx_init_hw(void) +{ + outb_p(0x18, 0x3c4); + outb_p(0x11, 0x3c5); +} + +static void smtc_free_fb_info(struct smtcfb_info *sfb) +{ + if (sfb) { + fb_alloc_cmap(&sfb->fb.cmap, 0, 0); + kfree(sfb); + } +} + +/* + * sm712vga_setup - process command line options, get vga parameter + * @options: string of options + * Returns zero. + * + */ +static int __init __maybe_unused sm712vga_setup(char *options) +{ + int index; + + if (!options || !*options) { + smdbg("\n No vga parameter\n"); + return -EINVAL; + } + + smtc_screen_info.lfb_width = 0; + smtc_screen_info.lfb_height = 0; + smtc_screen_info.lfb_depth = 0; + + smdbg("\nsm712vga_setup = %s\n", options); + + for (index = 0; + index < (sizeof(vesa_mode) / sizeof(struct vesa_mode_table)); + index++) { + if (strstr(options, vesa_mode[index].mode_index)) { + smtc_screen_info.lfb_width = vesa_mode[index].lfb_width; + smtc_screen_info.lfb_height = + vesa_mode[index].lfb_height; + smtc_screen_info.lfb_depth = vesa_mode[index].lfb_depth; + return 0; + } + } + + return -1; +} +__setup("vga=", sm712vga_setup); + +/* Jason (08/13/2009) + * Original init function changed to probe method to be used by pci_drv + * process used to detect chips replaced with kernel process in pci_drv + */ +static int __init smtcfb_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct smtcfb_info *sfb; + u_long smem_size = 0x00800000; /* default 8MB */ + char name[16]; + int err; + unsigned long pFramebufferPhysical; + + printk(KERN_INFO + "Silicon Motion display driver " SMTC_LINUX_FB_VERSION "\n"); + + err = pci_enable_device(pdev); /* enable SMTC chip */ + + if (err) + return err; + err = -ENOMEM; + + hw.chipID = ent->device; + sprintf(name, "sm%Xfb", hw.chipID); + + sfb = smtc_alloc_fb_info(pdev, name); + + if (!sfb) + goto failed; + /* Jason (08/13/2009) + * Store fb_info to be further used when suspending and resuming + */ + pci_set_drvdata(pdev, sfb); + + sm7xx_init_hw(); + + /*get mode parameter from smtc_screen_info */ + if (smtc_screen_info.lfb_width != 0) { + sfb->fb.var.xres = smtc_screen_info.lfb_width; + sfb->fb.var.yres = smtc_screen_info.lfb_height; + sfb->fb.var.bits_per_pixel = smtc_screen_info.lfb_depth; + } else { + /* default resolution 1024x600 16bit mode */ + sfb->fb.var.xres = SCREEN_X_RES; + sfb->fb.var.yres = SCREEN_Y_RES; + sfb->fb.var.bits_per_pixel = SCREEN_BPP; + } + +#ifdef __BIG_ENDIAN + if (sfb->fb.var.bits_per_pixel == 24) + sfb->fb.var.bits_per_pixel = (smtc_screen_info.lfb_depth = 32); +#endif + /* Map address and memory detection */ + pFramebufferPhysical = pci_resource_start(pdev, 0); + pci_read_config_byte(pdev, PCI_REVISION_ID, &hw.chipRevID); + + switch (hw.chipID) { + case 0x710: + case 0x712: + sfb->fb.fix.mmio_start = pFramebufferPhysical + 0x00400000; + sfb->fb.fix.mmio_len = 0x00400000; + smem_size = SM712_VIDEOMEMORYSIZE; +#ifdef __BIG_ENDIAN + hw.m_pLFB = (smtc_VRAMBaseAddress = + ioremap(pFramebufferPhysical, 0x00c00000)); +#else + hw.m_pLFB = (smtc_VRAMBaseAddress = + ioremap(pFramebufferPhysical, 0x00800000)); +#endif + hw.m_pMMIO = (smtc_RegBaseAddress = + smtc_VRAMBaseAddress + 0x00700000); + smtc_2DBaseAddress = (hw.m_pDPR = + smtc_VRAMBaseAddress + 0x00408000); + smtc_2Ddataport = smtc_VRAMBaseAddress + DE_DATA_PORT_712; + hw.m_pVPR = hw.m_pLFB + 0x0040c000; +#ifdef __BIG_ENDIAN + if (sfb->fb.var.bits_per_pixel == 32) { + smtc_VRAMBaseAddress += 0x800000; + hw.m_pLFB += 0x800000; + printk(KERN_INFO + "\nsmtc_VRAMBaseAddress=%p hw.m_pLFB=%p\n", + smtc_VRAMBaseAddress, hw.m_pLFB); + } +#endif + if (!smtc_RegBaseAddress) { + printk(KERN_INFO + "%s: unable to map memory mapped IO\n", + sfb->fb.fix.id); + return -ENOMEM; + } + + /* set MCLK = 14.31818 * (0x16 / 0x2) */ + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x62, 0x3e); + /* enable PCI burst */ + smtc_seqw(0x17, 0x20); + /* enable word swap */ +#ifdef __BIG_ENDIAN + if (sfb->fb.var.bits_per_pixel == 32) + smtc_seqw(0x17, 0x30); +#endif +#ifdef CONFIG_FB_SM7XX_ACCEL + smtc_2Dacceleration = 1; +#endif + break; + case 0x720: + sfb->fb.fix.mmio_start = pFramebufferPhysical; + sfb->fb.fix.mmio_len = 0x00200000; + smem_size = SM722_VIDEOMEMORYSIZE; + smtc_2DBaseAddress = (hw.m_pDPR = + ioremap(pFramebufferPhysical, 0x00a00000)); + hw.m_pLFB = (smtc_VRAMBaseAddress = + smtc_2DBaseAddress + 0x00200000); + hw.m_pMMIO = (smtc_RegBaseAddress = + smtc_2DBaseAddress + 0x000c0000); + smtc_2Ddataport = smtc_2DBaseAddress + DE_DATA_PORT_722; + hw.m_pVPR = smtc_2DBaseAddress + 0x800; + + smtc_seqw(0x62, 0xff); + smtc_seqw(0x6a, 0x0d); + smtc_seqw(0x6b, 0x02); + smtc_2Dacceleration = 0; + break; + default: + printk(KERN_INFO + "No valid Silicon Motion display chip was detected!\n"); + + smtc_free_fb_info(sfb); + return err; + } + + /* can support 32 bpp */ + if (15 == sfb->fb.var.bits_per_pixel) + sfb->fb.var.bits_per_pixel = 16; + + sfb->fb.var.xres_virtual = sfb->fb.var.xres; + sfb->fb.var.yres_virtual = sfb->fb.var.yres; + err = smtc_map_smem(sfb, pdev, smem_size); + if (err) + goto failed; + + smtcfb_setmode(sfb); + /* Primary display starting from 0 postion */ + hw.BaseAddressInVRAM = 0; + sfb->fb.par = &hw; + + err = register_framebuffer(&sfb->fb); + if (err < 0) + goto failed; + + printk(KERN_INFO "Silicon Motion SM%X Rev%X primary display mode" + "%dx%d-%d Init Complete.\n", hw.chipID, hw.chipRevID, + sfb->fb.var.xres, sfb->fb.var.yres, + sfb->fb.var.bits_per_pixel); + + return 0; + + failed: + printk(KERN_INFO "Silicon Motion, Inc. primary display init fail\n"); + + smtc_unmap_smem(sfb); + smtc_unmap_mmio(sfb); + smtc_free_fb_info(sfb); + + return err; +} + + +/* Jason (08/11/2009) PCI_DRV wrapper essential structs */ +static struct pci_device_id smtcfb_pci_table[] = { + {0x126f, 0x710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x126f, 0x712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x126f, 0x720, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0,} +}; + + +/* Jason (08/14/2009) + * do some clean up when the driver module is removed + */ +static void __devexit smtcfb_pci_remove(struct pci_dev *pdev) +{ + struct smtcfb_info *sfb; + + sfb = pci_get_drvdata(pdev); + pci_set_drvdata(pdev, NULL); + smtc_unmap_smem(sfb); + smtc_unmap_mmio(sfb); + unregister_framebuffer(&sfb->fb); + smtc_free_fb_info(sfb); +} + +/* Jason (08/14/2009) + * suspend function, called when the suspend event is triggered + */ +static int __maybe_unused smtcfb_suspend(struct pci_dev *pdev, pm_message_t msg) +{ + struct smtcfb_info *sfb; + int retv; + + sfb = pci_get_drvdata(pdev); + + /* set the hw in sleep mode use externel clock and self memory refresh + * so that we can turn off internal PLLs later on + */ + smtc_seqw(0x20, (smtc_seqr(0x20) | 0xc0)); + smtc_seqw(0x69, (smtc_seqr(0x69) & 0xf7)); + + switch (msg.event) { + case PM_EVENT_FREEZE: + case PM_EVENT_PRETHAW: + pdev->dev.power.power_state = msg; + return 0; + } + + /* when doing suspend, call fb apis and pci apis */ + if (msg.event == PM_EVENT_SUSPEND) { + acquire_console_sem(); + fb_set_suspend(&sfb->fb, 1); + release_console_sem(); + retv = pci_save_state(pdev); + pci_disable_device(pdev); + retv = pci_choose_state(pdev, msg); + retv = pci_set_power_state(pdev, retv); + } + + pdev->dev.power.power_state = msg; + + /* additionaly turn off all function blocks including internal PLLs */ + smtc_seqw(0x21, 0xff); + + return 0; +} + +static int __maybe_unused smtcfb_resume(struct pci_dev *pdev) +{ + struct smtcfb_info *sfb; + int retv; + + sfb = pci_get_drvdata(pdev); + + /* when resuming, restore pci data and fb cursor */ + if (pdev->dev.power.power_state.event != PM_EVENT_FREEZE) { + retv = pci_set_power_state(pdev, PCI_D0); + retv = pci_restore_state(pdev); + if (pci_enable_device(pdev)) + return -1; + pci_set_master(pdev); + } + + /* reinit hardware */ + sm7xx_init_hw(); + switch (hw.chipID) { + case 0x710: + case 0x712: + /* set MCLK = 14.31818 * (0x16 / 0x2) */ + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x62, 0x3e); + /* enable PCI burst */ + smtc_seqw(0x17, 0x20); +#ifdef __BIG_ENDIAN + if (sfb->fb.var.bits_per_pixel == 32) + smtc_seqw(0x17, 0x30); +#endif + break; + case 0x720: + smtc_seqw(0x62, 0xff); + smtc_seqw(0x6a, 0x0d); + smtc_seqw(0x6b, 0x02); + break; + } + + smtc_seqw(0x34, (smtc_seqr(0x34) | 0xc0)); + smtc_seqw(0x33, ((smtc_seqr(0x33) | 0x08) & 0xfb)); + + smtcfb_setmode(sfb); + + acquire_console_sem(); + fb_set_suspend(&sfb->fb, 0); + release_console_sem(); + + return 0; +} + +/* Jason (08/13/2009) + * pci_driver struct used to wrap the original driver + * so that it can be registered into the kernel and + * the proper method would be called when suspending and resuming + */ +static struct pci_driver smtcfb_driver = { + .name = "smtcfb", + .id_table = smtcfb_pci_table, + .probe = smtcfb_pci_probe, + .remove = __devexit_p(smtcfb_pci_remove), +#ifdef CONFIG_PM + .suspend = smtcfb_suspend, + .resume = smtcfb_resume, +#endif +}; + +static int __init smtcfb_init(void) +{ + return pci_register_driver(&smtcfb_driver); +} + +static void __exit smtcfb_exit(void) +{ + pci_unregister_driver(&smtcfb_driver); +} + +module_init(smtcfb_init); +module_exit(smtcfb_exit); + +MODULE_AUTHOR("Siliconmotion "); +MODULE_DESCRIPTION("Framebuffer driver for SMI Graphic Cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/sm7xx/smtcfb.h b/drivers/staging/sm7xx/smtcfb.h new file mode 100644 index 000000000000..7f2c34138215 --- /dev/null +++ b/drivers/staging/sm7xx/smtcfb.h @@ -0,0 +1,793 @@ +/* + * Silicon Motion SM712 frame buffer device + * + * Copyright (C) 2006 Silicon Motion Technology Corp. + * Authors: Ge Wang, gewang@siliconmotion.com + * Boyod boyod.yang@siliconmotion.com.cn + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#define SMTC_LINUX_FB_VERSION "version 0.11.2619.21.01 July 27, 2008" + +#define NR_PALETTE 256 +#define NR_RGB 2 + +#define FB_ACCEL_SMI_LYNX 88 + +#ifdef __BIG_ENDIAN +#define PC_VGA 0 +#else +#define PC_VGA 1 +#endif + +#define SCREEN_X_RES 1024 +#define SCREEN_Y_RES 600 +#define SCREEN_BPP 16 + +#ifndef FIELD_OFFSET +#define FIELD_OFSFET(type, field) \ + ((unsigned long) (PUCHAR) & (((type *)0)->field)) +#endif + +/*Assume SM712 graphics chip has 4MB VRAM */ +#define SM712_VIDEOMEMORYSIZE 0x00400000 +/*Assume SM722 graphics chip has 8MB VRAM */ +#define SM722_VIDEOMEMORYSIZE 0x00800000 + +#define dac_reg (0x3c8) +#define dac_val (0x3c9) + +extern char *smtc_RegBaseAddress; +#define smtc_mmiowb(dat, reg) writeb(dat, smtc_RegBaseAddress + reg) +#define smtc_mmioww(dat, reg) writew(dat, smtc_RegBaseAddress + reg) +#define smtc_mmiowl(dat, reg) writel(dat, smtc_RegBaseAddress + reg) + +#define smtc_mmiorb(reg) readb(smtc_RegBaseAddress + reg) +#define smtc_mmiorw(reg) readw(smtc_RegBaseAddress + reg) +#define smtc_mmiorl(reg) readl(smtc_RegBaseAddress + reg) + +#define SIZE_SR00_SR04 (0x04 - 0x00 + 1) +#define SIZE_SR10_SR24 (0x24 - 0x10 + 1) +#define SIZE_SR30_SR75 (0x75 - 0x30 + 1) +#define SIZE_SR80_SR93 (0x93 - 0x80 + 1) +#define SIZE_SRA0_SRAF (0xAF - 0xA0 + 1) +#define SIZE_GR00_GR08 (0x08 - 0x00 + 1) +#define SIZE_AR00_AR14 (0x14 - 0x00 + 1) +#define SIZE_CR00_CR18 (0x18 - 0x00 + 1) +#define SIZE_CR30_CR4D (0x4D - 0x30 + 1) +#define SIZE_CR90_CRA7 (0xA7 - 0x90 + 1) +#define SIZE_VPR (0x6C + 1) +#define SIZE_DPR (0x44 + 1) + +static inline void smtc_crtcw(int reg, int val) +{ + smtc_mmiowb(reg, 0x3d4); + smtc_mmiowb(val, 0x3d5); +} + +static inline unsigned int smtc_crtcr(int reg) +{ + smtc_mmiowb(reg, 0x3d4); + return smtc_mmiorb(0x3d5); +} + +static inline void smtc_grphw(int reg, int val) +{ + smtc_mmiowb(reg, 0x3ce); + smtc_mmiowb(val, 0x3cf); +} + +static inline unsigned int smtc_grphr(int reg) +{ + smtc_mmiowb(reg, 0x3ce); + return smtc_mmiorb(0x3cf); +} + +static inline void smtc_attrw(int reg, int val) +{ + smtc_mmiorb(0x3da); + smtc_mmiowb(reg, 0x3c0); + smtc_mmiorb(0x3c1); + smtc_mmiowb(val, 0x3c0); +} + +static inline void smtc_seqw(int reg, int val) +{ + smtc_mmiowb(reg, 0x3c4); + smtc_mmiowb(val, 0x3c5); +} + +static inline unsigned int smtc_seqr(int reg) +{ + smtc_mmiowb(reg, 0x3c4); + return smtc_mmiorb(0x3c5); +} + +/* The next structure holds all information relevant for a specific video mode. + */ + +struct ModeInit { + int mmSizeX; + int mmSizeY; + int bpp; + int hz; + unsigned char Init_MISC; + unsigned char Init_SR00_SR04[SIZE_SR00_SR04]; + unsigned char Init_SR10_SR24[SIZE_SR10_SR24]; + unsigned char Init_SR30_SR75[SIZE_SR30_SR75]; + unsigned char Init_SR80_SR93[SIZE_SR80_SR93]; + unsigned char Init_SRA0_SRAF[SIZE_SRA0_SRAF]; + unsigned char Init_GR00_GR08[SIZE_GR00_GR08]; + unsigned char Init_AR00_AR14[SIZE_AR00_AR14]; + unsigned char Init_CR00_CR18[SIZE_CR00_CR18]; + unsigned char Init_CR30_CR4D[SIZE_CR30_CR4D]; + unsigned char Init_CR90_CRA7[SIZE_CR90_CRA7]; +}; + +/********************************************************************** + SM712 Mode table. + **********************************************************************/ +struct ModeInit VGAMode[] = { + { + /* mode#0: 640 x 480 16Bpp 60Hz */ + 640, 480, 16, 60, + /* Init_MISC */ + 0xE3, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x00, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, + 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, + 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, + 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, + 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, + 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, + 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, + 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, + 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, + 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, + }, + }, + { + /* mode#1: 640 x 480 24Bpp 60Hz */ + 640, 480, 24, 60, + /* Init_MISC */ + 0xE3, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x00, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, + 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, + 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, + 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, + 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, + 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, + 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, + 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, + 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, + 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, + }, + }, + { + /* mode#0: 640 x 480 32Bpp 60Hz */ + 640, 480, 32, 60, + /* Init_MISC */ + 0xE3, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x00, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, + 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, + 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, + 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, + 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, + 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, + 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, + 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, + 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, + 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, + }, + }, + + { /* mode#2: 800 x 600 16Bpp 60Hz */ + 800, 600, 16, 60, + /* Init_MISC */ + 0x2B, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x34, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24, + 0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24, + 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, + 0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24, + 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, + 0x02, 0x45, 0x30, 0x35, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24, + 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, + 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, + 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, + 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, + 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, + }, + }, + { /* mode#3: 800 x 600 24Bpp 60Hz */ + 800, 600, 24, 60, + 0x2B, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x36, 0x03, 0x20, 0x09, 0xC0, 0x36, 0x36, 0x36, + 0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x36, 0x36, 0x36, + 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, + 0x04, 0x55, 0x59, 0x36, 0x36, 0x00, 0x00, 0x36, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, + 0x02, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x36, + 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x36, 0x36, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, + 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, + 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, + 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, + 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, + }, + }, + { /* mode#7: 800 x 600 32Bpp 60Hz */ + 800, 600, 32, 60, + /* Init_MISC */ + 0x2B, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x34, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24, + 0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24, + 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, + 0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24, + 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, + 0x02, 0x45, 0x30, 0x35, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24, + 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, + 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, + 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, + 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, + 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, + }, + }, + /* We use 1024x768 table to light 1024x600 panel for lemote */ + { /* mode#4: 1024 x 600 16Bpp 60Hz */ + 1024, 600, 16, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x00, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xC8, 0x40, 0x14, 0x60, 0x00, 0x0A, 0x17, 0x20, + 0x51, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x00, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x22, 0x03, 0x24, 0x09, 0xC0, 0x22, 0x22, 0x22, + 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x22, 0x22, 0x22, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x22, 0x22, 0x00, 0x00, 0x22, + 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x16, 0x02, 0x0D, 0x82, 0x09, 0x02, + 0x04, 0x45, 0x3F, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0xA3, 0x7F, 0x00, 0x82, 0x0b, 0x6f, 0x57, 0x00, + 0x5c, 0x0f, 0xE0, 0xe0, 0x7F, 0x57, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, + { /* mode#5: 1024 x 768 24Bpp 60Hz */ + 1024, 768, 24, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x3B, 0x0D, 0x09, 0x02, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0xA3, 0x7F, 0x00, 0x86, 0x15, 0x24, 0xFF, 0x00, + 0x01, 0x07, 0xE5, 0x20, 0x7F, 0xFF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, + { /* mode#4: 1024 x 768 32Bpp 60Hz */ + 1024, 768, 32, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x32, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x3B, 0x0D, 0x09, 0x02, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0xA3, 0x7F, 0x00, 0x86, 0x15, 0x24, 0xFF, 0x00, + 0x01, 0x07, 0xE5, 0x20, 0x7F, 0xFF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, + { /* mode#6: 320 x 240 16Bpp 60Hz */ + 320, 240, 16, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x32, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x08, 0x43, 0x08, 0x43, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x30, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0x2E, 0x27, 0x00, 0x2b, 0x0c, 0x0F, 0xEF, 0x00, + 0xFe, 0x0f, 0x01, 0xC0, 0x27, 0xEF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, + + { /* mode#8: 320 x 240 32Bpp 60Hz */ + 320, 240, 32, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x32, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x08, 0x43, 0x08, 0x43, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x30, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0x2E, 0x27, 0x00, 0x2b, 0x0c, 0x0F, 0xEF, 0x00, + 0xFe, 0x0f, 0x01, 0xC0, 0x27, 0xEF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, +}; + +#define numVGAModes (sizeof(VGAMode) / sizeof(struct ModeInit)) -- GitLab From 29d249ed80c80b479df78e456e6809223c648505 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 18 Dec 2009 09:59:48 -0800 Subject: [PATCH 569/618] Staging: dst: remove from the tree DST is dead, no one is using it and upstream has abandoned it, so remove it from the tree because it is not going anywhere. Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/dst/Kconfig | 67 --- drivers/staging/dst/Makefile | 3 - drivers/staging/dst/crypto.c | 733 ---------------------- drivers/staging/dst/dcore.c | 968 ------------------------------ drivers/staging/dst/export.c | 660 -------------------- drivers/staging/dst/state.c | 844 -------------------------- drivers/staging/dst/thread_pool.c | 348 ----------- drivers/staging/dst/trans.c | 337 ----------- include/linux/dst.h | 587 ------------------ 11 files changed, 4550 deletions(-) delete mode 100644 drivers/staging/dst/Kconfig delete mode 100644 drivers/staging/dst/Makefile delete mode 100644 drivers/staging/dst/crypto.c delete mode 100644 drivers/staging/dst/dcore.c delete mode 100644 drivers/staging/dst/export.c delete mode 100644 drivers/staging/dst/state.c delete mode 100644 drivers/staging/dst/thread_pool.c delete mode 100644 drivers/staging/dst/trans.c delete mode 100644 include/linux/dst.h diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index db0de940949e..94eb86319ff3 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -87,8 +87,6 @@ source "drivers/staging/frontier/Kconfig" source "drivers/staging/dream/Kconfig" -source "drivers/staging/dst/Kconfig" - source "drivers/staging/pohmelfs/Kconfig" source "drivers/staging/b3dfg/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 73c6a71155e0..b5e67b889f60 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_RTL8192E) += rtl8192e/ obj-$(CONFIG_INPUT_MIMIO) += mimio/ obj-$(CONFIG_TRANZPORT) += frontier/ obj-$(CONFIG_DREAM) += dream/ -obj-$(CONFIG_DST) += dst/ obj-$(CONFIG_POHMELFS) += pohmelfs/ obj-$(CONFIG_B3DFG) += b3dfg/ obj-$(CONFIG_IDE_PHISON) += phison/ diff --git a/drivers/staging/dst/Kconfig b/drivers/staging/dst/Kconfig deleted file mode 100644 index 448d342ac2a2..000000000000 --- a/drivers/staging/dst/Kconfig +++ /dev/null @@ -1,67 +0,0 @@ -config DST - tristate "Distributed storage" - depends on NET && CRYPTO && SYSFS && BLK_DEV - select CONNECTOR - ---help--- - DST is a network block device storage, which can be used to organize - exported storage on the remote nodes into the local block device. - - DST works on top of any network media and protocol; it is just a matter - of configuration utility to understand the correct addresses. The most - common example is TCP over IP, which allows to pass through firewalls and - create remote backup storage in a different datacenter. DST requires - single port to be enabled on the exporting node and outgoing connections - on the local node. - - DST works with in-kernel client and server, which improves performance by - eliminating unneded data copies and by not depending on the version - of the external IO components. It requires userspace configuration utility - though. - - DST uses transaction model, when each store has to be explicitly acked - from the remote node to be considered as successfully written. There - may be lots of in-flight transactions. When remote host does not ack - the transaction it will be resent predefined number of times with specified - timeouts between them. All those parameters are configurable. Transactions - are marked as failed after all resends complete unsuccessfully; having - long enough resend timeout and/or large number of resends allows not to - return error to the higher (FS usually) layer in case of short network - problems or remote node outages. In case of network RAID setup this means - that storage will not degrade until transactions are marked as failed, and - thus will not force checksum recalculation and data rebuild. In case of - connection failure DST will try to reconnect to the remote node automatically. - DST sends ping commands at idle time to detect if remote node is alive. - - Because of transactional model it is possible to use zero-copy sending - without worry of data corruption (which in turn could be detected by the - strong checksums though). - - DST may fully encrypt the data channel in case of untrusted channel and implement - strong checksum of the transferred data. It is possible to configure algorithms - and crypto keys; they should match on both sides of the network channel. - Crypto processing does not introduce noticeble performance overhead, since DST - uses configurable pool of threads to perform crypto processing. - - DST utilizes memory pool model of all its transaction allocations (it is the - only additional allocation on the client) and server allocations (bio pools, - while pages are allocated from the slab). - - At startup DST performs a simple negotiation with the export node to determine - access permissions and size of the exported storage. It can be extended if - new parameters should be autonegotiated. - - DST carries block IO flags in the protocol, which allows to transparently implement - barriers and sync/flush operations. Those flags are used in the export node where - IO against the local storage is performed, which means that sync write will be sync - on the remote node too, which in turn improves data integrity and improved resistance - to errors and data corruption during power outages or storage damages. - - Homepage: http://www.ioremap.net/projects/dst - Userspace configuration utility and the latest releases: http://www.ioremap.net/archive/dst/ - -config DST_DEBUG - bool "DST debug" - depends on DST - ---help--- - This option will enable HEAVY debugging of the DST. - Turn it on ONLY if you have to debug some really obscure problem. diff --git a/drivers/staging/dst/Makefile b/drivers/staging/dst/Makefile deleted file mode 100644 index 3a8b0cf9643e..000000000000 --- a/drivers/staging/dst/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_DST) += nst.o - -nst-y := dcore.o state.o export.o thread_pool.o crypto.o trans.o diff --git a/drivers/staging/dst/crypto.c b/drivers/staging/dst/crypto.c deleted file mode 100644 index 351295c97a4b..000000000000 --- a/drivers/staging/dst/crypto.c +++ /dev/null @@ -1,733 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include - -/* - * Tricky bastard, but IV can be more complex with time... - */ -static inline u64 dst_gen_iv(struct dst_trans *t) -{ - return t->gen; -} - -/* - * Crypto machinery: hash/cipher support for the given crypto controls. - */ -static struct crypto_hash *dst_init_hash(struct dst_crypto_ctl *ctl, u8 *key) -{ - int err; - struct crypto_hash *hash; - - hash = crypto_alloc_hash(ctl->hash_algo, 0, CRYPTO_ALG_ASYNC); - if (IS_ERR(hash)) { - err = PTR_ERR(hash); - dprintk("%s: failed to allocate hash '%s', err: %d.\n", - __func__, ctl->hash_algo, err); - goto err_out_exit; - } - - ctl->crypto_attached_size = crypto_hash_digestsize(hash); - - if (!ctl->hash_keysize) - return hash; - - err = crypto_hash_setkey(hash, key, ctl->hash_keysize); - if (err) { - dprintk("%s: failed to set key for hash '%s', err: %d.\n", - __func__, ctl->hash_algo, err); - goto err_out_free; - } - - return hash; - -err_out_free: - crypto_free_hash(hash); -err_out_exit: - return ERR_PTR(err); -} - -static struct crypto_ablkcipher *dst_init_cipher(struct dst_crypto_ctl *ctl, - u8 *key) -{ - int err = -EINVAL; - struct crypto_ablkcipher *cipher; - - if (!ctl->cipher_keysize) - goto err_out_exit; - - cipher = crypto_alloc_ablkcipher(ctl->cipher_algo, 0, 0); - if (IS_ERR(cipher)) { - err = PTR_ERR(cipher); - dprintk("%s: failed to allocate cipher '%s', err: %d.\n", - __func__, ctl->cipher_algo, err); - goto err_out_exit; - } - - crypto_ablkcipher_clear_flags(cipher, ~0); - - err = crypto_ablkcipher_setkey(cipher, key, ctl->cipher_keysize); - if (err) { - dprintk("%s: failed to set key for cipher '%s', err: %d.\n", - __func__, ctl->cipher_algo, err); - goto err_out_free; - } - - return cipher; - -err_out_free: - crypto_free_ablkcipher(cipher); -err_out_exit: - return ERR_PTR(err); -} - -/* - * Crypto engine has a pool of pages to encrypt data into before sending - * it over the network. This pool is freed/allocated here. - */ -static void dst_crypto_pages_free(struct dst_crypto_engine *e) -{ - unsigned int i; - - for (i = 0; i < e->page_num; ++i) - __free_page(e->pages[i]); - kfree(e->pages); -} - -static int dst_crypto_pages_alloc(struct dst_crypto_engine *e, int num) -{ - int i; - - e->pages = kmalloc(num * sizeof(struct page **), GFP_KERNEL); - if (!e->pages) - return -ENOMEM; - - for (i = 0; i < num; ++i) { - e->pages[i] = alloc_page(GFP_KERNEL); - if (!e->pages[i]) - goto err_out_free_pages; - } - - e->page_num = num; - return 0; - -err_out_free_pages: - while (--i >= 0) - __free_page(e->pages[i]); - - kfree(e->pages); - return -ENOMEM; -} - -/* - * Initialize crypto engine for given node. - * Setup cipher/hash, keys, pool of threads and private data. - */ -static int dst_crypto_engine_init(struct dst_crypto_engine *e, - struct dst_node *n) -{ - int err; - struct dst_crypto_ctl *ctl = &n->crypto; - - err = dst_crypto_pages_alloc(e, n->max_pages); - if (err) - goto err_out_exit; - - e->size = PAGE_SIZE; - e->data = kmalloc(e->size, GFP_KERNEL); - if (!e->data) { - err = -ENOMEM; - goto err_out_free_pages; - } - - if (ctl->hash_algo[0]) { - e->hash = dst_init_hash(ctl, n->hash_key); - if (IS_ERR(e->hash)) { - err = PTR_ERR(e->hash); - e->hash = NULL; - goto err_out_free; - } - } - - if (ctl->cipher_algo[0]) { - e->cipher = dst_init_cipher(ctl, n->cipher_key); - if (IS_ERR(e->cipher)) { - err = PTR_ERR(e->cipher); - e->cipher = NULL; - goto err_out_free_hash; - } - } - - return 0; - -err_out_free_hash: - crypto_free_hash(e->hash); -err_out_free: - kfree(e->data); -err_out_free_pages: - dst_crypto_pages_free(e); -err_out_exit: - return err; -} - -static void dst_crypto_engine_exit(struct dst_crypto_engine *e) -{ - if (e->hash) - crypto_free_hash(e->hash); - if (e->cipher) - crypto_free_ablkcipher(e->cipher); - dst_crypto_pages_free(e); - kfree(e->data); -} - -/* - * Waiting for cipher processing to be completed. - */ -struct dst_crypto_completion { - struct completion complete; - int error; -}; - -static void dst_crypto_complete(struct crypto_async_request *req, int err) -{ - struct dst_crypto_completion *c = req->data; - - if (err == -EINPROGRESS) - return; - - dprintk("%s: req: %p, err: %d.\n", __func__, req, err); - c->error = err; - complete(&c->complete); -} - -static int dst_crypto_process(struct ablkcipher_request *req, - struct scatterlist *sg_dst, struct scatterlist *sg_src, - void *iv, int enc, unsigned long timeout) -{ - struct dst_crypto_completion c; - int err; - - init_completion(&c.complete); - c.error = -EINPROGRESS; - - ablkcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, - dst_crypto_complete, &c); - - ablkcipher_request_set_crypt(req, sg_src, sg_dst, sg_src->length, iv); - - if (enc) - err = crypto_ablkcipher_encrypt(req); - else - err = crypto_ablkcipher_decrypt(req); - - switch (err) { - case -EINPROGRESS: - case -EBUSY: - err = wait_for_completion_interruptible_timeout(&c.complete, - timeout); - if (!err) - err = -ETIMEDOUT; - else - err = c.error; - break; - default: - break; - } - - return err; -} - -/* - * DST uses generic iteration approach for data crypto processing. - * Single block IO request is switched into array of scatterlists, - * which are submitted to the crypto processing iterator. - * - * Input and output iterator initialization are different, since - * in output case we can not encrypt data in-place and need a - * temporary storage, which is then being sent to the remote peer. - */ -static int dst_trans_iter_out(struct bio *bio, struct dst_crypto_engine *e, - int (*iterator) (struct dst_crypto_engine *e, - struct scatterlist *dst, - struct scatterlist *src)) -{ - struct bio_vec *bv; - int err, i; - - sg_init_table(e->src, bio->bi_vcnt); - sg_init_table(e->dst, bio->bi_vcnt); - - bio_for_each_segment(bv, bio, i) { - sg_set_page(&e->src[i], bv->bv_page, bv->bv_len, bv->bv_offset); - sg_set_page(&e->dst[i], e->pages[i], bv->bv_len, bv->bv_offset); - - err = iterator(e, &e->dst[i], &e->src[i]); - if (err) - return err; - } - - return 0; -} - -static int dst_trans_iter_in(struct bio *bio, struct dst_crypto_engine *e, - int (*iterator) (struct dst_crypto_engine *e, - struct scatterlist *dst, - struct scatterlist *src)) -{ - struct bio_vec *bv; - int err, i; - - sg_init_table(e->src, bio->bi_vcnt); - sg_init_table(e->dst, bio->bi_vcnt); - - bio_for_each_segment(bv, bio, i) { - sg_set_page(&e->src[i], bv->bv_page, bv->bv_len, bv->bv_offset); - sg_set_page(&e->dst[i], bv->bv_page, bv->bv_len, bv->bv_offset); - - err = iterator(e, &e->dst[i], &e->src[i]); - if (err) - return err; - } - - return 0; -} - -static int dst_crypt_iterator(struct dst_crypto_engine *e, - struct scatterlist *sg_dst, struct scatterlist *sg_src) -{ - struct ablkcipher_request *req = e->data; - u8 iv[32]; - - memset(iv, 0, sizeof(iv)); - - memcpy(iv, &e->iv, sizeof(e->iv)); - - return dst_crypto_process(req, sg_dst, sg_src, iv, e->enc, e->timeout); -} - -static int dst_crypt(struct dst_crypto_engine *e, struct bio *bio) -{ - struct ablkcipher_request *req = e->data; - - memset(req, 0, sizeof(struct ablkcipher_request)); - ablkcipher_request_set_tfm(req, e->cipher); - - if (e->enc) - return dst_trans_iter_out(bio, e, dst_crypt_iterator); - else - return dst_trans_iter_in(bio, e, dst_crypt_iterator); -} - -static int dst_hash_iterator(struct dst_crypto_engine *e, - struct scatterlist *sg_dst, struct scatterlist *sg_src) -{ - return crypto_hash_update(e->data, sg_src, sg_src->length); -} - -static int dst_hash(struct dst_crypto_engine *e, struct bio *bio, void *dst) -{ - struct hash_desc *desc = e->data; - int err; - - desc->tfm = e->hash; - desc->flags = 0; - - err = crypto_hash_init(desc); - if (err) - return err; - - err = dst_trans_iter_in(bio, e, dst_hash_iterator); - if (err) - return err; - - err = crypto_hash_final(desc, dst); - if (err) - return err; - - return 0; -} - -/* - * Initialize/cleanup a crypto thread. The only thing it should - * do is to allocate a pool of pages as temporary storage. - * And to setup cipher and/or hash. - */ -static void *dst_crypto_thread_init(void *data) -{ - struct dst_node *n = data; - struct dst_crypto_engine *e; - int err = -ENOMEM; - - e = kzalloc(sizeof(struct dst_crypto_engine), GFP_KERNEL); - if (!e) - goto err_out_exit; - e->src = kcalloc(2 * n->max_pages, sizeof(struct scatterlist), - GFP_KERNEL); - if (!e->src) - goto err_out_free; - - e->dst = e->src + n->max_pages; - - err = dst_crypto_engine_init(e, n); - if (err) - goto err_out_free_all; - - return e; - -err_out_free_all: - kfree(e->src); -err_out_free: - kfree(e); -err_out_exit: - return ERR_PTR(err); -} - -static void dst_crypto_thread_cleanup(void *private) -{ - struct dst_crypto_engine *e = private; - - dst_crypto_engine_exit(e); - kfree(e->src); - kfree(e); -} - -/* - * Initialize crypto engine for given node: store keys, create pool - * of threads, initialize each one. - * - * Each thread has unique ID, but 0 and 1 are reserved for receiving and - * accepting threads (if export node), so IDs could start from 2, but starting - * them from 10 allows easily understand what this thread is for. - */ -int dst_node_crypto_init(struct dst_node *n, struct dst_crypto_ctl *ctl) -{ - void *key = (ctl + 1); - int err = -ENOMEM, i; - char name[32]; - - if (ctl->hash_keysize) { - n->hash_key = kmalloc(ctl->hash_keysize, GFP_KERNEL); - if (!n->hash_key) - goto err_out_exit; - memcpy(n->hash_key, key, ctl->hash_keysize); - } - - if (ctl->cipher_keysize) { - n->cipher_key = kmalloc(ctl->cipher_keysize, GFP_KERNEL); - if (!n->cipher_key) - goto err_out_free_hash; - memcpy(n->cipher_key, key, ctl->cipher_keysize); - } - memcpy(&n->crypto, ctl, sizeof(struct dst_crypto_ctl)); - - for (i = 0; i < ctl->thread_num; ++i) { - snprintf(name, sizeof(name), "%s-crypto-%d", n->name, i); - /* Unique ids... */ - err = thread_pool_add_worker(n->pool, name, i + 10, - dst_crypto_thread_init, dst_crypto_thread_cleanup, n); - if (err) - goto err_out_free_threads; - } - - return 0; - -err_out_free_threads: - while (--i >= 0) - thread_pool_del_worker_id(n->pool, i+10); - - if (ctl->cipher_keysize) - kfree(n->cipher_key); - ctl->cipher_keysize = 0; -err_out_free_hash: - if (ctl->hash_keysize) - kfree(n->hash_key); - ctl->hash_keysize = 0; -err_out_exit: - return err; -} - -void dst_node_crypto_exit(struct dst_node *n) -{ - struct dst_crypto_ctl *ctl = &n->crypto; - - if (ctl->cipher_algo[0] || ctl->hash_algo[0]) { - kfree(n->hash_key); - kfree(n->cipher_key); - } -} - -/* - * Thrad pool setup callback. Just stores a transaction in private data. - */ -static int dst_trans_crypto_setup(void *crypto_engine, void *trans) -{ - struct dst_crypto_engine *e = crypto_engine; - - e->private = trans; - return 0; -} - -#if 0 -static void dst_dump_bio(struct bio *bio) -{ - u8 *p; - struct bio_vec *bv; - int i; - - bio_for_each_segment(bv, bio, i) { - dprintk("%s: %llu/%u: size: %u, offset: %u, data: ", - __func__, bio->bi_sector, bio->bi_size, - bv->bv_len, bv->bv_offset); - - p = kmap(bv->bv_page) + bv->bv_offset; - for (i = 0; i < bv->bv_len; ++i) - printk(KERN_DEBUG "%02x ", p[i]); - kunmap(bv->bv_page); - printk("\n"); - } -} -#endif - -/* - * Encrypt/hash data and send it to the network. - */ -static int dst_crypto_process_sending(struct dst_crypto_engine *e, - struct bio *bio, u8 *hash) -{ - int err; - - if (e->cipher) { - err = dst_crypt(e, bio); - if (err) - goto err_out_exit; - } - - if (e->hash) { - err = dst_hash(e, bio, hash); - if (err) - goto err_out_exit; - -#ifdef CONFIG_DST_DEBUG - { - unsigned int i; - - /* dst_dump_bio(bio); */ - - printk(KERN_DEBUG "%s: bio: %llu/%u, rw: %lu, hash: ", - __func__, (u64)bio->bi_sector, - bio->bi_size, bio_data_dir(bio)); - for (i = 0; i < crypto_hash_digestsize(e->hash); ++i) - printk("%02x ", hash[i]); - printk("\n"); - } -#endif - } - - return 0; - -err_out_exit: - return err; -} - -/* - * Check if received data is valid. Decipher if it is. - */ -static int dst_crypto_process_receiving(struct dst_crypto_engine *e, - struct bio *bio, u8 *hash, u8 *recv_hash) -{ - int err; - - if (e->hash) { - int mismatch; - - err = dst_hash(e, bio, hash); - if (err) - goto err_out_exit; - - mismatch = !!memcmp(recv_hash, hash, - crypto_hash_digestsize(e->hash)); -#ifdef CONFIG_DST_DEBUG - /* dst_dump_bio(bio); */ - - printk(KERN_DEBUG "%s: bio: %llu/%u, rw: %lu, hash mismatch: %d", - __func__, (u64)bio->bi_sector, bio->bi_size, - bio_data_dir(bio), mismatch); - if (mismatch) { - unsigned int i; - - printk(", recv/calc: "); - for (i = 0; i < crypto_hash_digestsize(e->hash); ++i) - printk("%02x/%02x ", recv_hash[i], hash[i]); - - } - printk("\n"); -#endif - err = -1; - if (mismatch) - goto err_out_exit; - } - - if (e->cipher) { - err = dst_crypt(e, bio); - if (err) - goto err_out_exit; - } - - return 0; - -err_out_exit: - return err; -} - -/* - * Thread pool callback to encrypt data and send it to the netowork. - */ -static int dst_trans_crypto_action(void *crypto_engine, void *schedule_data) -{ - struct dst_crypto_engine *e = crypto_engine; - struct dst_trans *t = schedule_data; - struct bio *bio = t->bio; - int err; - - dprintk("%s: t: %p, gen: %llu, cipher: %p, hash: %p.\n", - __func__, t, t->gen, e->cipher, e->hash); - - e->enc = t->enc; - e->iv = dst_gen_iv(t); - - if (bio_data_dir(bio) == WRITE) { - err = dst_crypto_process_sending(e, bio, t->cmd.hash); - if (err) - goto err_out_exit; - - if (e->hash) { - t->cmd.csize = crypto_hash_digestsize(e->hash); - t->cmd.size += t->cmd.csize; - } - - return dst_trans_send(t); - } else { - u8 *hash = e->data + e->size/2; - - err = dst_crypto_process_receiving(e, bio, hash, t->cmd.hash); - if (err) - goto err_out_exit; - - dst_trans_remove(t); - dst_trans_put(t); - } - - return 0; - -err_out_exit: - t->error = err; - dst_trans_put(t); - return err; -} - -/* - * Schedule crypto processing for given transaction. - */ -int dst_trans_crypto(struct dst_trans *t) -{ - struct dst_node *n = t->n; - int err; - - err = thread_pool_schedule(n->pool, - dst_trans_crypto_setup, dst_trans_crypto_action, - t, MAX_SCHEDULE_TIMEOUT); - if (err) - goto err_out_exit; - - return 0; - -err_out_exit: - dst_trans_put(t); - return err; -} - -/* - * Crypto machinery for the export node. - */ -static int dst_export_crypto_setup(void *crypto_engine, void *bio) -{ - struct dst_crypto_engine *e = crypto_engine; - - e->private = bio; - return 0; -} - -static int dst_export_crypto_action(void *crypto_engine, void *schedule_data) -{ - struct dst_crypto_engine *e = crypto_engine; - struct bio *bio = schedule_data; - struct dst_export_priv *p = bio->bi_private; - int err; - - dprintk("%s: e: %p, data: %p, bio: %llu/%u, dir: %lu.\n", - __func__, e, e->data, (u64)bio->bi_sector, - bio->bi_size, bio_data_dir(bio)); - - e->enc = (bio_data_dir(bio) == READ); - e->iv = p->cmd.id; - - if (bio_data_dir(bio) == WRITE) { - u8 *hash = e->data + e->size/2; - - err = dst_crypto_process_receiving(e, bio, hash, p->cmd.hash); - if (err) - goto err_out_exit; - - generic_make_request(bio); - } else { - err = dst_crypto_process_sending(e, bio, p->cmd.hash); - if (err) - goto err_out_exit; - - if (e->hash) { - p->cmd.csize = crypto_hash_digestsize(e->hash); - p->cmd.size += p->cmd.csize; - } - - err = dst_export_send_bio(bio); - } - return 0; - -err_out_exit: - bio_put(bio); - return err; -} - -int dst_export_crypto(struct dst_node *n, struct bio *bio) -{ - int err; - - err = thread_pool_schedule(n->pool, - dst_export_crypto_setup, dst_export_crypto_action, - bio, MAX_SCHEDULE_TIMEOUT); - if (err) - goto err_out_exit; - - return 0; - -err_out_exit: - bio_put(bio); - return err; -} diff --git a/drivers/staging/dst/dcore.c b/drivers/staging/dst/dcore.c deleted file mode 100644 index c83ca7e3d048..000000000000 --- a/drivers/staging/dst/dcore.c +++ /dev/null @@ -1,968 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -static int dst_major; - -static DEFINE_MUTEX(dst_hash_lock); -static struct list_head *dst_hashtable; -static unsigned int dst_hashtable_size = 128; -module_param(dst_hashtable_size, uint, 0644); - -static char dst_name[] = "Dementianting goldfish"; - -static DEFINE_IDR(dst_index_idr); -static struct cb_id cn_dst_id = { CN_DST_IDX, CN_DST_VAL }; - -/* - * DST sysfs tree for device called 'storage': - * - * /sys/bus/dst/devices/storage/ - * /sys/bus/dst/devices/storage/type : 192.168.4.80:1025 - * /sys/bus/dst/devices/storage/size : 800 - * /sys/bus/dst/devices/storage/name : storage - */ - -static int dst_dev_match(struct device *dev, struct device_driver *drv) -{ - return 1; -} - -static struct bus_type dst_dev_bus_type = { - .name = "dst", - .match = &dst_dev_match, -}; - -static void dst_node_release(struct device *dev) -{ - struct dst_info *info = container_of(dev, struct dst_info, device); - - kfree(info); -} - -static struct device dst_node_dev = { - .bus = &dst_dev_bus_type, - .release = &dst_node_release -}; - -/* - * Setting size of the node after it was changed. - */ -static void dst_node_set_size(struct dst_node *n) -{ - struct block_device *bdev; - - set_capacity(n->disk, n->size >> 9); - - bdev = bdget_disk(n->disk, 0); - if (bdev) { - mutex_lock(&bdev->bd_inode->i_mutex); - i_size_write(bdev->bd_inode, n->size); - mutex_unlock(&bdev->bd_inode->i_mutex); - bdput(bdev); - } -} - -/* - * Distributed storage request processing function. - */ -static int dst_request(struct request_queue *q, struct bio *bio) -{ - struct dst_node *n = q->queuedata; - int err = -EIO; - - if (bio_empty_barrier(bio) && !blk_queue_discard(q)) { - /* - * This is a dirty^Wnice hack, but if we complete this - * operation with -EOPNOTSUPP like intended, XFS - * will stuck and freeze the machine. This may be - * not particulary XFS problem though, but it is the - * only FS which sends empty barrier at umount time - * I worked with. - * - * Empty barriers are not allowed anyway, see 51fd77bd9f512 - * for example, although later it was changed to - * bio_rw_flagged(bio, BIO_RW_DISCARD) only, which does not - * work in this case. - */ - /* err = -EOPNOTSUPP; */ - err = 0; - goto end_io; - } - - bio_get(bio); - - return dst_process_bio(n, bio); - -end_io: - bio_endio(bio, err); - return err; -} - -/* - * Open/close callbacks for appropriate block device. - */ -static int dst_bdev_open(struct block_device *bdev, fmode_t mode) -{ - struct dst_node *n = bdev->bd_disk->private_data; - - dst_node_get(n); - return 0; -} - -static int dst_bdev_release(struct gendisk *disk, fmode_t mode) -{ - struct dst_node *n = disk->private_data; - - dst_node_put(n); - return 0; -} - -static struct block_device_operations dst_blk_ops = { - .open = dst_bdev_open, - .release = dst_bdev_release, - .owner = THIS_MODULE, -}; - -/* - * Block layer binding - disk is created when array is fully configured - * by userspace request. - */ -static int dst_node_create_disk(struct dst_node *n) -{ - int err = -ENOMEM; - u32 index = 0; - - n->queue = blk_init_queue(NULL, NULL); - if (!n->queue) - goto err_out_exit; - - n->queue->queuedata = n; - blk_queue_make_request(n->queue, dst_request); - blk_queue_max_phys_segments(n->queue, n->max_pages); - blk_queue_max_hw_segments(n->queue, n->max_pages); - - err = -ENOMEM; - n->disk = alloc_disk(1); - if (!n->disk) - goto err_out_free_queue; - - if (!(n->state->permissions & DST_PERM_WRITE)) { - printk(KERN_INFO "DST node %s attached read-only.\n", n->name); - set_disk_ro(n->disk, 1); - } - - if (!idr_pre_get(&dst_index_idr, GFP_KERNEL)) - goto err_out_put; - - mutex_lock(&dst_hash_lock); - err = idr_get_new(&dst_index_idr, NULL, &index); - mutex_unlock(&dst_hash_lock); - if (err) - goto err_out_put; - - n->disk->major = dst_major; - n->disk->first_minor = index; - n->disk->fops = &dst_blk_ops; - n->disk->queue = n->queue; - n->disk->private_data = n; - snprintf(n->disk->disk_name, sizeof(n->disk->disk_name), - "dst-%s", n->name); - - return 0; - -err_out_put: - put_disk(n->disk); -err_out_free_queue: - blk_cleanup_queue(n->queue); -err_out_exit: - return err; -} - -/* - * Sysfs machinery: show device's size. - */ -static ssize_t dst_show_size(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dst_info *info = container_of(dev, struct dst_info, device); - - return sprintf(buf, "%llu\n", info->size); -} - -/* - * Show local exported device. - */ -static ssize_t dst_show_local(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dst_info *info = container_of(dev, struct dst_info, device); - - return sprintf(buf, "%s\n", info->local); -} - -/* - * Shows type of the remote node - device major/minor number - * for local nodes and address (af_inet ipv4/ipv6 only) for remote nodes. - */ -static ssize_t dst_show_type(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dst_info *info = container_of(dev, struct dst_info, device); - int family = info->net.addr.sa_family; - - if (family == AF_INET) { - struct sockaddr_in *sin = (struct sockaddr_in *)&info->net.addr; - return sprintf(buf, "%u.%u.%u.%u:%d\n", - NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port)); - } else if (family == AF_INET6) { - struct sockaddr_in6 *sin = (struct sockaddr_in6 *) - &info->net.addr; - return sprintf(buf, - "%pi6:%d\n", - &sin->sin6_addr, ntohs(sin->sin6_port)); - } else { - int i, sz = PAGE_SIZE - 2; /* 0 symbol and '\n' below */ - int size, addrlen = info->net.addr.sa_data_len; - unsigned char *a = (unsigned char *)&info->net.addr.sa_data; - char *buf_orig = buf; - - size = snprintf(buf, sz, "family: %d, addrlen: %u, addr: ", - family, addrlen); - sz -= size; - buf += size; - - for (i = 0; i < addrlen; ++i) { - if (sz < 3) - break; - - size = snprintf(buf, sz, "%02x ", a[i]); - sz -= size; - buf += size; - } - buf += sprintf(buf, "\n"); - - return buf - buf_orig; - } - return 0; -} - -static struct device_attribute dst_node_attrs[] = { - __ATTR(size, 0444, dst_show_size, NULL), - __ATTR(type, 0444, dst_show_type, NULL), - __ATTR(local, 0444, dst_show_local, NULL), -}; - -static int dst_create_node_attributes(struct dst_node *n) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(dst_node_attrs); ++i) { - err = device_create_file(&n->info->device, - &dst_node_attrs[i]); - if (err) - goto err_out_remove_all; - } - return 0; - -err_out_remove_all: - while (--i >= 0) - device_remove_file(&n->info->device, - &dst_node_attrs[i]); - - return err; -} - -static void dst_remove_node_attributes(struct dst_node *n) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(dst_node_attrs); ++i) - device_remove_file(&n->info->device, - &dst_node_attrs[i]); -} - -/* - * Sysfs cleanup and initialization. - * Shows number of useful parameters. - */ -static void dst_node_sysfs_exit(struct dst_node *n) -{ - if (n->info) { - dst_remove_node_attributes(n); - device_unregister(&n->info->device); - n->info = NULL; - } -} - -static int dst_node_sysfs_init(struct dst_node *n) -{ - int err; - - n->info = kzalloc(sizeof(struct dst_info), GFP_KERNEL); - if (!n->info) - return -ENOMEM; - - memcpy(&n->info->device, &dst_node_dev, sizeof(struct device)); - n->info->size = n->size; - - dev_set_name(&n->info->device, "dst-%s", n->name); - err = device_register(&n->info->device); - if (err) { - dprintk(KERN_ERR "Failed to register node '%s', err: %d.\n", - n->name, err); - goto err_out_exit; - } - - dst_create_node_attributes(n); - - return 0; - -err_out_exit: - kfree(n->info); - n->info = NULL; - return err; -} - -/* - * DST node hash tables machinery. - */ -static inline unsigned int dst_hash(char *str, unsigned int size) -{ - return jhash(str, size, 0) % dst_hashtable_size; -} - -static void dst_node_remove(struct dst_node *n) -{ - mutex_lock(&dst_hash_lock); - list_del_init(&n->node_entry); - mutex_unlock(&dst_hash_lock); -} - -static void dst_node_add(struct dst_node *n) -{ - unsigned hash = dst_hash(n->name, sizeof(n->name)); - - mutex_lock(&dst_hash_lock); - list_add_tail(&n->node_entry, &dst_hashtable[hash]); - mutex_unlock(&dst_hash_lock); -} - -/* - * Cleaning node when it is about to be freed. - * There are still users of the socket though, - * so connection cleanup should be protected. - */ -static void dst_node_cleanup(struct dst_node *n) -{ - struct dst_state *st = n->state; - - if (!st) - return; - - if (n->queue) { - blk_cleanup_queue(n->queue); - - mutex_lock(&dst_hash_lock); - idr_remove(&dst_index_idr, n->disk->first_minor); - mutex_unlock(&dst_hash_lock); - - put_disk(n->disk); - } - - if (n->bdev) { - sync_blockdev(n->bdev); - close_bdev_exclusive(n->bdev, FMODE_READ|FMODE_WRITE); - } - - dst_state_lock(st); - st->need_exit = 1; - dst_state_exit_connected(st); - dst_state_unlock(st); - - wake_up(&st->thread_wait); - - dst_state_put(st); - n->state = NULL; -} - -/* - * Free security attributes attached to given node. - */ -static void dst_security_exit(struct dst_node *n) -{ - struct dst_secure *s, *tmp; - - list_for_each_entry_safe(s, tmp, &n->security_list, sec_entry) { - list_del(&s->sec_entry); - kfree(s); - } -} - -/* - * Free node when there are no more users. - * Actually node has to be freed on behalf od userspace process, - * since there are number of threads, which are embedded in the - * node, so they can not exit and free node from there, that is - * why there is a wakeup if reference counter is not equal to zero. - */ -void dst_node_put(struct dst_node *n) -{ - if (unlikely(!n)) - return; - - dprintk("%s: n: %p, refcnt: %d.\n", - __func__, n, atomic_read(&n->refcnt)); - - if (atomic_dec_and_test(&n->refcnt)) { - dst_node_remove(n); - n->trans_scan_timeout = 0; - dst_node_cleanup(n); - thread_pool_destroy(n->pool); - dst_node_sysfs_exit(n); - dst_node_crypto_exit(n); - dst_security_exit(n); - dst_node_trans_exit(n); - - kfree(n); - - dprintk("%s: freed n: %p.\n", __func__, n); - } else { - wake_up(&n->wait); - } -} - -/* - * Setting up export device: lookup by the name, get its size - * and setup listening socket, which will accept clients, which - * will submit IO for given storage. - */ -static int dst_setup_export(struct dst_node *n, struct dst_ctl *ctl, - struct dst_export_ctl *le) -{ - int err; - - snprintf(n->info->local, sizeof(n->info->local), "%s", le->device); - - n->bdev = open_bdev_exclusive(le->device, FMODE_READ|FMODE_WRITE, NULL); - if (IS_ERR(n->bdev)) - return PTR_ERR(n->bdev); - - if (n->size != 0) - n->size = min_t(loff_t, n->bdev->bd_inode->i_size, n->size); - else - n->size = n->bdev->bd_inode->i_size; - - n->info->size = n->size; - err = dst_node_init_listened(n, le); - if (err) - goto err_out_cleanup; - - return 0; - -err_out_cleanup: - close_bdev_exclusive(n->bdev, FMODE_READ|FMODE_WRITE); - n->bdev = NULL; - - return err; -} - -/* Empty thread pool callbacks for the network processing threads. */ -static inline void *dst_thread_network_init(void *data) -{ - dprintk("%s: data: %p.\n", __func__, data); - return data; -} - -static inline void dst_thread_network_cleanup(void *data) -{ - dprintk("%s: data: %p.\n", __func__, data); -} - -/* - * Allocate DST node and initialize some of its parameters. - */ -static struct dst_node *dst_alloc_node(struct dst_ctl *ctl, - int (*start)(struct dst_node *), - int num) -{ - struct dst_node *n; - int err; - - n = kzalloc(sizeof(struct dst_node), GFP_KERNEL); - if (!n) - return NULL; - - INIT_LIST_HEAD(&n->node_entry); - - INIT_LIST_HEAD(&n->security_list); - mutex_init(&n->security_lock); - - init_waitqueue_head(&n->wait); - - n->trans_scan_timeout = msecs_to_jiffies(ctl->trans_scan_timeout); - if (!n->trans_scan_timeout) - n->trans_scan_timeout = HZ; - - n->trans_max_retries = ctl->trans_max_retries; - if (!n->trans_max_retries) - n->trans_max_retries = 10; - - /* - * Pretty much arbitrary default numbers. - * 32 matches maximum number of pages in bio originated from ext3 (31). - */ - n->max_pages = ctl->max_pages; - if (!n->max_pages) - n->max_pages = 32; - - if (n->max_pages > 1024) - n->max_pages = 1024; - - n->start = start; - n->size = ctl->size; - - atomic_set(&n->refcnt, 1); - atomic_long_set(&n->gen, 0); - snprintf(n->name, sizeof(n->name), "%s", ctl->name); - - err = dst_node_sysfs_init(n); - if (err) - goto err_out_free; - - n->pool = thread_pool_create(num, n->name, dst_thread_network_init, - dst_thread_network_cleanup, n); - if (IS_ERR(n->pool)) { - err = PTR_ERR(n->pool); - goto err_out_sysfs_exit; - } - - dprintk("%s: n: %p, name: %s.\n", __func__, n, n->name); - - return n; - -err_out_sysfs_exit: - dst_node_sysfs_exit(n); -err_out_free: - kfree(n); - return NULL; -} - -/* - * Starting a node, connected to the remote server: - * register block device and initialize transaction mechanism. - * In revers order though. - * - * It will autonegotiate some parameters with the remote node - * and update local if needed. - * - * Transaction initialization should be the last thing before - * starting the node, since transaction should include not only - * block IO, but also crypto related data (if any), which are - * initialized separately. - */ -static int dst_start_remote(struct dst_node *n) -{ - int err; - - err = dst_node_trans_init(n, sizeof(struct dst_trans)); - if (err) - return err; - - err = dst_node_create_disk(n); - if (err) - return err; - - dst_node_set_size(n); - add_disk(n->disk); - - dprintk("DST: started remote node '%s', minor: %d.\n", - n->name, n->disk->first_minor); - - return 0; -} - -/* - * Adding remote node and initialize connection. - */ -static int dst_add_remote(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - int err; - struct dst_network_ctl *rctl = data; - - if (n) - return -EEXIST; - - if (size != sizeof(struct dst_network_ctl)) - return -EINVAL; - - n = dst_alloc_node(ctl, dst_start_remote, 1); - if (!n) - return -ENOMEM; - - memcpy(&n->info->net, rctl, sizeof(struct dst_network_ctl)); - err = dst_node_init_connected(n, rctl); - if (err) - goto err_out_free; - - dst_node_add(n); - - return 0; - -err_out_free: - dst_node_put(n); - return err; -} - -/* - * Adding export node: initializing block device and listening socket. - */ -static int dst_add_export(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - int err; - struct dst_export_ctl *le = data; - - if (n) - return -EEXIST; - - if (size != sizeof(struct dst_export_ctl)) - return -EINVAL; - - n = dst_alloc_node(ctl, dst_start_export, 2); - if (!n) - return -EINVAL; - - err = dst_setup_export(n, ctl, le); - if (err) - goto err_out_free; - - dst_node_add(n); - - return 0; - -err_out_free: - dst_node_put(n); - return err; -} - -static int dst_node_remove_unload(struct dst_node *n) -{ - printk(KERN_INFO "STOPPED name: '%s', size: %llu.\n", - n->name, n->size); - - if (n->disk) - del_gendisk(n->disk); - - dst_node_remove(n); - dst_node_sysfs_exit(n); - - /* - * This is not a hack. Really. - * Node's reference counter allows to implement fine grained - * node freeing, but since all transactions (which hold node's - * reference counter) are processed in the dedicated thread, - * it is possible that reference will hit zero in that thread, - * so we will not be able to exit thread and cleanup the node. - * - * So, we remove disk, so no new activity is possible, and - * wait until all pending transaction are completed (either - * in receiving thread or by timeout in workqueue), in this - * case reference counter will be less or equal to 2 (once set in - * dst_alloc_node() and then in connector message parser; - * or when we force module unloading, and connector message - * parser does not hold a reference, in this case reference - * counter will be equal to 1), - * and subsequent dst_node_put() calls will free the node. - */ - dprintk("%s: going to sleep with %d refcnt.\n", - __func__, atomic_read(&n->refcnt)); - wait_event(n->wait, atomic_read(&n->refcnt) <= 2); - - dst_node_put(n); - return 0; -} - -/* - * Remove node from the hash table. - */ -static int dst_del_node(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - if (!n) - return -ENODEV; - - return dst_node_remove_unload(n); -} - -/* - * Initialize crypto processing for given node. - */ -static int dst_crypto_init(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - struct dst_crypto_ctl *crypto = data; - - if (!n) - return -ENODEV; - - if (size != sizeof(struct dst_crypto_ctl) + crypto->hash_keysize + - crypto->cipher_keysize) - return -EINVAL; - - if (n->trans_cache) - return -EEXIST; - - return dst_node_crypto_init(n, crypto); -} - -/* - * Security attributes for given node. - */ -static int dst_security_init(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - struct dst_secure *s; - - if (!n) - return -ENODEV; - - if (size != sizeof(struct dst_secure_user)) - return -EINVAL; - - s = kmalloc(sizeof(struct dst_secure), GFP_KERNEL); - if (!s) - return -ENOMEM; - - memcpy(&s->sec, data, size); - - mutex_lock(&n->security_lock); - list_add_tail(&s->sec_entry, &n->security_list); - mutex_unlock(&n->security_lock); - - return 0; -} - -/* - * Kill'em all! - */ -static int dst_start_node(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - int err; - - if (!n) - return -ENODEV; - - if (n->trans_cache) - return 0; - - err = n->start(n); - if (err) - return err; - - printk(KERN_INFO "STARTED name: '%s', size: %llu.\n", n->name, n->size); - return 0; -} - -typedef int (*dst_command_func)(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size); - -/* - * List of userspace commands. - */ -static dst_command_func dst_commands[] = { - [DST_ADD_REMOTE] = &dst_add_remote, - [DST_ADD_EXPORT] = &dst_add_export, - [DST_DEL_NODE] = &dst_del_node, - [DST_CRYPTO] = &dst_crypto_init, - [DST_SECURITY] = &dst_security_init, - [DST_START] = &dst_start_node, -}; - -/* - * Configuration parser. - */ -static void cn_dst_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp) -{ - struct dst_ctl *ctl; - int err; - struct dst_ctl_ack ack; - struct dst_node *n = NULL, *tmp; - unsigned int hash; - - if (!cap_raised(nsp->eff_cap, CAP_SYS_ADMIN)) { - err = -EPERM; - goto out; - } - - if (msg->len < sizeof(struct dst_ctl)) { - err = -EBADMSG; - goto out; - } - - ctl = (struct dst_ctl *)msg->data; - - if (ctl->cmd >= DST_CMD_MAX) { - err = -EINVAL; - goto out; - } - hash = dst_hash(ctl->name, sizeof(ctl->name)); - - mutex_lock(&dst_hash_lock); - list_for_each_entry(tmp, &dst_hashtable[hash], node_entry) { - if (!memcmp(tmp->name, ctl->name, sizeof(tmp->name))) { - n = tmp; - dst_node_get(n); - break; - } - } - mutex_unlock(&dst_hash_lock); - - err = dst_commands[ctl->cmd](n, ctl, msg->data + sizeof(struct dst_ctl), - msg->len - sizeof(struct dst_ctl)); - - dst_node_put(n); -out: - memcpy(&ack.msg, msg, sizeof(struct cn_msg)); - - ack.msg.ack = msg->ack + 1; - ack.msg.len = sizeof(struct dst_ctl_ack) - sizeof(struct cn_msg); - - ack.error = err; - - cn_netlink_send(&ack.msg, 0, GFP_KERNEL); -} - -/* - * Global initialization: sysfs, hash table, block device registration, - * connector and various caches. - */ -static int __init dst_sysfs_init(void) -{ - return bus_register(&dst_dev_bus_type); -} - -static void dst_sysfs_exit(void) -{ - bus_unregister(&dst_dev_bus_type); -} - -static int __init dst_hashtable_init(void) -{ - unsigned int i; - - dst_hashtable = kcalloc(dst_hashtable_size, sizeof(struct list_head), - GFP_KERNEL); - if (!dst_hashtable) - return -ENOMEM; - - for (i = 0; i < dst_hashtable_size; ++i) - INIT_LIST_HEAD(&dst_hashtable[i]); - - return 0; -} - -static void dst_hashtable_exit(void) -{ - unsigned int i; - struct dst_node *n, *tmp; - - for (i = 0; i < dst_hashtable_size; ++i) { - list_for_each_entry_safe(n, tmp, &dst_hashtable[i], node_entry) { - dst_node_remove_unload(n); - } - } - - kfree(dst_hashtable); -} - -static int __init dst_sys_init(void) -{ - int err = -ENOMEM; - - err = dst_hashtable_init(); - if (err) - goto err_out_exit; - - err = dst_export_init(); - if (err) - goto err_out_hashtable_exit; - - err = register_blkdev(dst_major, DST_NAME); - if (err < 0) - goto err_out_export_exit; - if (err) - dst_major = err; - - err = dst_sysfs_init(); - if (err) - goto err_out_unregister; - - err = cn_add_callback(&cn_dst_id, "DST", cn_dst_callback); - if (err) - goto err_out_sysfs_exit; - - printk(KERN_INFO "Distributed storage, '%s' release.\n", dst_name); - - return 0; - -err_out_sysfs_exit: - dst_sysfs_exit(); -err_out_unregister: - unregister_blkdev(dst_major, DST_NAME); -err_out_export_exit: - dst_export_exit(); -err_out_hashtable_exit: - dst_hashtable_exit(); -err_out_exit: - return err; -} - -static void __exit dst_sys_exit(void) -{ - cn_del_callback(&cn_dst_id); - unregister_blkdev(dst_major, DST_NAME); - dst_hashtable_exit(); - dst_sysfs_exit(); - dst_export_exit(); -} - -module_init(dst_sys_init); -module_exit(dst_sys_exit); - -MODULE_DESCRIPTION("Distributed storage"); -MODULE_AUTHOR("Evgeniy Polyakov "); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/dst/export.c b/drivers/staging/dst/export.c deleted file mode 100644 index c324230e8b60..000000000000 --- a/drivers/staging/dst/export.c +++ /dev/null @@ -1,660 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* - * Export bioset is used for server block IO requests. - */ -static struct bio_set *dst_bio_set; - -int __init dst_export_init(void) -{ - int err = -ENOMEM; - - dst_bio_set = bioset_create(32, sizeof(struct dst_export_priv)); - if (!dst_bio_set) - goto err_out_exit; - - return 0; - -err_out_exit: - return err; -} - -void dst_export_exit(void) -{ - bioset_free(dst_bio_set); -} - -/* - * When client connects and autonegotiates with the server node, - * its permissions are checked in a security attributes and sent - * back. - */ -static unsigned int dst_check_permissions(struct dst_state *main, - struct dst_state *st) -{ - struct dst_node *n = main->node; - struct dst_secure *sentry; - struct dst_secure_user *s; - struct saddr *sa = &st->ctl.addr; - unsigned int perm = 0; - - mutex_lock(&n->security_lock); - list_for_each_entry(sentry, &n->security_list, sec_entry) { - s = &sentry->sec; - - if (s->addr.sa_family != sa->sa_family) - continue; - - if (s->addr.sa_data_len != sa->sa_data_len) - continue; - - /* - * This '2' below is a port field. This may be very wrong to do - * in atalk for example though. If there will be any need - * to extent protocol to something else, I can create - * per-family helpers and use them instead of this memcmp. - */ - if (memcmp(s->addr.sa_data + 2, sa->sa_data + 2, - sa->sa_data_len - 2)) - continue; - - perm = s->permissions; - } - mutex_unlock(&n->security_lock); - - return perm; -} - -/* - * Accept new client: allocate appropriate network state and check permissions. - */ -static struct dst_state *dst_accept_client(struct dst_state *st) -{ - unsigned int revents = 0; - unsigned int err_mask = POLLERR | POLLHUP | POLLRDHUP; - unsigned int mask = err_mask | POLLIN; - struct dst_node *n = st->node; - int err = 0; - struct socket *sock = NULL; - struct dst_state *new; - - while (!err && !sock) { - revents = dst_state_poll(st); - - if (!(revents & mask)) { - DEFINE_WAIT(wait); - - for (;;) { - prepare_to_wait(&st->thread_wait, - &wait, TASK_INTERRUPTIBLE); - if (!n->trans_scan_timeout || st->need_exit) - break; - - revents = dst_state_poll(st); - - if (revents & mask) - break; - - if (signal_pending(current)) - break; - - /* - * Magic HZ? Polling check above is not safe in - * all cases (like socket reset in BH context), - * so it is simpler just to postpone it to the - * process context instead of implementing - * special locking there. - */ - schedule_timeout(HZ); - } - finish_wait(&st->thread_wait, &wait); - } - - err = -ECONNRESET; - dst_state_lock(st); - - dprintk("%s: st: %p, revents: %x [err: %d, in: %d].\n", - __func__, st, revents, revents & err_mask, - revents & POLLIN); - - if (revents & err_mask) { - dprintk("%s: revents: %x, socket: %p, err: %d.\n", - __func__, revents, st->socket, err); - err = -ECONNRESET; - } - - if (!n->trans_scan_timeout || st->need_exit) - err = -ENODEV; - - if (st->socket && (revents & POLLIN)) - err = kernel_accept(st->socket, &sock, 0); - - dst_state_unlock(st); - } - - if (err) - goto err_out_exit; - - new = dst_state_alloc(st->node); - if (IS_ERR(new)) { - err = -ENOMEM; - goto err_out_release; - } - new->socket = sock; - - new->ctl.addr.sa_data_len = sizeof(struct sockaddr); - err = kernel_getpeername(sock, (struct sockaddr *)&new->ctl.addr, - (int *)&new->ctl.addr.sa_data_len); - if (err) - goto err_out_put; - - new->permissions = dst_check_permissions(st, new); - if (new->permissions == 0) { - err = -EPERM; - dst_dump_addr(sock, (struct sockaddr *)&new->ctl.addr, - "Client is not allowed to connect"); - goto err_out_put; - } - - err = dst_poll_init(new); - if (err) - goto err_out_put; - - dst_dump_addr(sock, (struct sockaddr *)&new->ctl.addr, - "Connected client"); - - return new; - -err_out_put: - dst_state_put(new); -err_out_release: - sock_release(sock); -err_out_exit: - return ERR_PTR(err); -} - -/* - * Each server's block request sometime finishes. - * Usually it happens in hard irq context of the appropriate controller, - * so to play good with all cases we just queue BIO into the queue - * and wake up processing thread, which gets completed request and - * send (encrypting if needed) it back to the client (if it was a read - * request), or sends back reply that writing successfully completed. - */ -static int dst_export_process_request_queue(struct dst_state *st) -{ - unsigned long flags; - struct dst_export_priv *p = NULL; - struct bio *bio; - int err = 0; - - while (!list_empty(&st->request_list)) { - spin_lock_irqsave(&st->request_lock, flags); - if (!list_empty(&st->request_list)) { - p = list_first_entry(&st->request_list, - struct dst_export_priv, request_entry); - list_del(&p->request_entry); - } - spin_unlock_irqrestore(&st->request_lock, flags); - - if (!p) - break; - - bio = p->bio; - - if (dst_need_crypto(st->node) && (bio_data_dir(bio) == READ)) - err = dst_export_crypto(st->node, bio); - else - err = dst_export_send_bio(bio); - - if (err) - break; - } - - return err; -} - -/* - * Cleanup export state. - * It has to wait until all requests are finished, - * and then free them all. - */ -static void dst_state_cleanup_export(struct dst_state *st) -{ - struct dst_export_priv *p; - unsigned long flags; - - /* - * This loop waits for all pending bios to be completed and freed. - */ - while (atomic_read(&st->refcnt) > 1) { - dprintk("%s: st: %p, refcnt: %d, list_empty: %d.\n", - __func__, st, atomic_read(&st->refcnt), - list_empty(&st->request_list)); - wait_event_timeout(st->thread_wait, - (atomic_read(&st->refcnt) == 1) || - !list_empty(&st->request_list), - HZ/2); - - while (!list_empty(&st->request_list)) { - p = NULL; - spin_lock_irqsave(&st->request_lock, flags); - if (!list_empty(&st->request_list)) { - p = list_first_entry(&st->request_list, - struct dst_export_priv, request_entry); - list_del(&p->request_entry); - } - spin_unlock_irqrestore(&st->request_lock, flags); - - if (p) - bio_put(p->bio); - - dprintk("%s: st: %p, refcnt: %d, list_empty: %d, p: " - "%p.\n", __func__, st, atomic_read(&st->refcnt), - list_empty(&st->request_list), p); - } - } - - dst_state_put(st); -} - -/* - * Client accepting thread. - * Not only accepts new connection, but also schedules receiving thread - * and performs request completion described above. - */ -static int dst_accept(void *init_data, void *schedule_data) -{ - struct dst_state *main_st = schedule_data; - struct dst_node *n = init_data; - struct dst_state *st; - int err; - - while (n->trans_scan_timeout && !main_st->need_exit) { - dprintk("%s: main_st: %p, n: %p.\n", __func__, main_st, n); - st = dst_accept_client(main_st); - if (IS_ERR(st)) - continue; - - err = dst_state_schedule_receiver(st); - if (!err) { - while (n->trans_scan_timeout) { - err = wait_event_interruptible_timeout(st->thread_wait, - !list_empty(&st->request_list) || - !n->trans_scan_timeout || - st->need_exit, - HZ); - - if (!n->trans_scan_timeout || st->need_exit) - break; - - if (list_empty(&st->request_list)) - continue; - - err = dst_export_process_request_queue(st); - if (err) - break; - } - - st->need_exit = 1; - wake_up(&st->thread_wait); - } - - dst_state_cleanup_export(st); - } - - dprintk("%s: freeing listening socket st: %p.\n", __func__, main_st); - - dst_state_lock(main_st); - dst_poll_exit(main_st); - dst_state_socket_release(main_st); - dst_state_unlock(main_st); - dst_state_put(main_st); - dprintk("%s: freed listening socket st: %p.\n", __func__, main_st); - - return 0; -} - -int dst_start_export(struct dst_node *n) -{ - if (list_empty(&n->security_list)) { - printk(KERN_ERR "You are trying to export node '%s' " - "without security attributes.\nNo clients will " - "be allowed to connect. Exiting.\n", n->name); - return -EINVAL; - } - return dst_node_trans_init(n, sizeof(struct dst_export_priv)); -} - -/* - * Initialize listening state and schedule accepting thread. - */ -int dst_node_init_listened(struct dst_node *n, struct dst_export_ctl *le) -{ - struct dst_state *st; - int err = -ENOMEM; - struct dst_network_ctl *ctl = &le->ctl; - - memcpy(&n->info->net, ctl, sizeof(struct dst_network_ctl)); - - st = dst_state_alloc(n); - if (IS_ERR(st)) { - err = PTR_ERR(st); - goto err_out_exit; - } - memcpy(&st->ctl, ctl, sizeof(struct dst_network_ctl)); - - err = dst_state_socket_create(st); - if (err) - goto err_out_put; - - st->socket->sk->sk_reuse = 1; - - err = kernel_bind(st->socket, (struct sockaddr *)&ctl->addr, - ctl->addr.sa_data_len); - if (err) - goto err_out_socket_release; - - err = kernel_listen(st->socket, 1024); - if (err) - goto err_out_socket_release; - n->state = st; - - err = dst_poll_init(st); - if (err) - goto err_out_socket_release; - - dst_state_get(st); - - err = thread_pool_schedule(n->pool, dst_thread_setup, - dst_accept, st, MAX_SCHEDULE_TIMEOUT); - if (err) - goto err_out_poll_exit; - - return 0; - -err_out_poll_exit: - dst_poll_exit(st); -err_out_socket_release: - dst_state_socket_release(st); -err_out_put: - dst_state_put(st); -err_out_exit: - n->state = NULL; - return err; -} - -/* - * Free bio and related private data. - * Also drop a reference counter for appropriate state, - * which waits when there are no more block IOs in-flight. - */ -static void dst_bio_destructor(struct bio *bio) -{ - struct bio_vec *bv; - struct dst_export_priv *priv = bio->bi_private; - int i; - - bio_for_each_segment(bv, bio, i) { - if (!bv->bv_page) - break; - - __free_page(bv->bv_page); - } - - if (priv) - dst_state_put(priv->state); - bio_free(bio, dst_bio_set); -} - -/* - * Block IO completion. Queue request to be sent back to - * the client (or just confirmation). - */ -static void dst_bio_end_io(struct bio *bio, int err) -{ - struct dst_export_priv *p = bio->bi_private; - struct dst_state *st = p->state; - unsigned long flags; - - spin_lock_irqsave(&st->request_lock, flags); - list_add_tail(&p->request_entry, &st->request_list); - spin_unlock_irqrestore(&st->request_lock, flags); - - wake_up(&st->thread_wait); -} - -/* - * Allocate read request for the server. - */ -static int dst_export_read_request(struct bio *bio, unsigned int total_size) -{ - unsigned int size; - struct page *page; - int err; - - while (total_size) { - err = -ENOMEM; - page = alloc_page(GFP_KERNEL); - if (!page) - goto err_out_exit; - - size = min_t(unsigned int, PAGE_SIZE, total_size); - - err = bio_add_page(bio, page, size, 0); - dprintk("%s: bio: %llu/%u, size: %u, err: %d.\n", - __func__, (u64)bio->bi_sector, bio->bi_size, - size, err); - if (err <= 0) - goto err_out_free_page; - - total_size -= size; - } - - return 0; - -err_out_free_page: - __free_page(page); -err_out_exit: - return err; -} - -/* - * Allocate write request for the server. - * Should not only get pages, but also read data from the network. - */ -static int dst_export_write_request(struct dst_state *st, - struct bio *bio, unsigned int total_size) -{ - unsigned int size; - struct page *page; - void *data; - int err; - - while (total_size) { - err = -ENOMEM; - page = alloc_page(GFP_KERNEL); - if (!page) - goto err_out_exit; - - data = kmap(page); - if (!data) - goto err_out_free_page; - - size = min_t(unsigned int, PAGE_SIZE, total_size); - - err = dst_data_recv(st, data, size); - if (err) - goto err_out_unmap_page; - - err = bio_add_page(bio, page, size, 0); - if (err <= 0) - goto err_out_unmap_page; - - kunmap(page); - - total_size -= size; - } - - return 0; - -err_out_unmap_page: - kunmap(page); -err_out_free_page: - __free_page(page); -err_out_exit: - return err; -} - -/* - * Groovy, we've gotten an IO request from the client. - * Allocate BIO from the bioset, private data from the mempool - * and lots of pages for IO. - */ -int dst_process_io(struct dst_state *st) -{ - struct dst_node *n = st->node; - struct dst_cmd *cmd = st->data; - struct bio *bio; - struct dst_export_priv *priv; - int err = -ENOMEM; - - if (unlikely(!n->bdev)) { - err = -EINVAL; - goto err_out_exit; - } - - bio = bio_alloc_bioset(GFP_KERNEL, - PAGE_ALIGN(cmd->size) >> PAGE_SHIFT, - dst_bio_set); - if (!bio) - goto err_out_exit; - - priv = (struct dst_export_priv *)(((void *)bio) - - sizeof (struct dst_export_priv)); - - priv->state = dst_state_get(st); - priv->bio = bio; - - bio->bi_private = priv; - bio->bi_end_io = dst_bio_end_io; - bio->bi_destructor = dst_bio_destructor; - bio->bi_bdev = n->bdev; - - /* - * Server side is only interested in two low bits: - * uptodate (set by itself actually) and rw block - */ - bio->bi_flags |= cmd->flags & 3; - - bio->bi_rw = cmd->rw; - bio->bi_size = 0; - bio->bi_sector = cmd->sector; - - dst_bio_to_cmd(bio, &priv->cmd, DST_IO_RESPONSE, cmd->id); - - priv->cmd.flags = 0; - priv->cmd.size = cmd->size; - - if (bio_data_dir(bio) == WRITE) { - err = dst_recv_cdata(st, priv->cmd.hash); - if (err) - goto err_out_free; - - err = dst_export_write_request(st, bio, cmd->size); - if (err) - goto err_out_free; - - if (dst_need_crypto(n)) - return dst_export_crypto(n, bio); - } else { - err = dst_export_read_request(bio, cmd->size); - if (err) - goto err_out_free; - } - - dprintk("%s: bio: %llu/%u, rw: %lu, dir: %lu, flags: %lx, phys: %d.\n", - __func__, (u64)bio->bi_sector, bio->bi_size, - bio->bi_rw, bio_data_dir(bio), - bio->bi_flags, bio->bi_phys_segments); - - generic_make_request(bio); - - return 0; - -err_out_free: - bio_put(bio); -err_out_exit: - return err; -} - -/* - * Ok, block IO is ready, let's send it back to the client... - */ -int dst_export_send_bio(struct bio *bio) -{ - struct dst_export_priv *p = bio->bi_private; - struct dst_state *st = p->state; - struct dst_cmd *cmd = &p->cmd; - int err; - - dprintk("%s: id: %llu, bio: %llu/%u, csize: %u, flags: %lu, rw: %lu.\n", - __func__, cmd->id, (u64)bio->bi_sector, bio->bi_size, - cmd->csize, bio->bi_flags, bio->bi_rw); - - dst_convert_cmd(cmd); - - dst_state_lock(st); - if (!st->socket) { - err = -ECONNRESET; - goto err_out_unlock; - } - - if (bio_data_dir(bio) == WRITE) { - /* ... or just confirmation that writing has completed. */ - cmd->size = cmd->csize = 0; - err = dst_data_send_header(st->socket, cmd, - sizeof(struct dst_cmd), 0); - if (err) - goto err_out_unlock; - } else { - err = dst_send_bio(st, cmd, bio); - if (err) - goto err_out_unlock; - } - - dst_state_unlock(st); - - bio_put(bio); - return 0; - -err_out_unlock: - dst_state_unlock(st); - - bio_put(bio); - return err; -} diff --git a/drivers/staging/dst/state.c b/drivers/staging/dst/state.c deleted file mode 100644 index 02a05e6c48c3..000000000000 --- a/drivers/staging/dst/state.c +++ /dev/null @@ -1,844 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* - * Polling machinery. - */ - -struct dst_poll_helper { - poll_table pt; - struct dst_state *st; -}; - -static int dst_queue_wake(wait_queue_t *wait, unsigned mode, - int sync, void *key) -{ - struct dst_state *st = container_of(wait, struct dst_state, wait); - - wake_up(&st->thread_wait); - return 1; -} - -static void dst_queue_func(struct file *file, wait_queue_head_t *whead, - poll_table *pt) -{ - struct dst_state *st = container_of(pt, struct dst_poll_helper, pt)->st; - - st->whead = whead; - init_waitqueue_func_entry(&st->wait, dst_queue_wake); - add_wait_queue(whead, &st->wait); -} - -void dst_poll_exit(struct dst_state *st) -{ - if (st->whead) { - remove_wait_queue(st->whead, &st->wait); - st->whead = NULL; - } -} - -int dst_poll_init(struct dst_state *st) -{ - struct dst_poll_helper ph; - - ph.st = st; - init_poll_funcptr(&ph.pt, &dst_queue_func); - - st->socket->ops->poll(NULL, st->socket, &ph.pt); - return 0; -} - -/* - * Header receiving function - may block. - */ -static int dst_data_recv_header(struct socket *sock, - void *data, unsigned int size, int block) -{ - struct msghdr msg; - struct kvec iov; - int err; - - iov.iov_base = data; - iov.iov_len = size; - - msg.msg_iov = (struct iovec *)&iov; - msg.msg_iovlen = 1; - msg.msg_name = NULL; - msg.msg_namelen = 0; - msg.msg_control = NULL; - msg.msg_controllen = 0; - msg.msg_flags = (block) ? MSG_WAITALL : MSG_DONTWAIT; - - err = kernel_recvmsg(sock, &msg, &iov, 1, iov.iov_len, - msg.msg_flags); - if (err != size) - return -1; - - return 0; -} - -/* - * Header sending function - may block. - */ -int dst_data_send_header(struct socket *sock, - void *data, unsigned int size, int more) -{ - struct msghdr msg; - struct kvec iov; - int err; - - iov.iov_base = data; - iov.iov_len = size; - - msg.msg_iov = (struct iovec *)&iov; - msg.msg_iovlen = 1; - msg.msg_name = NULL; - msg.msg_namelen = 0; - msg.msg_control = NULL; - msg.msg_controllen = 0; - msg.msg_flags = MSG_WAITALL | (more ? MSG_MORE : 0); - - err = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); - if (err != size) { - dprintk("%s: size: %u, more: %d, err: %d.\n", - __func__, size, more, err); - return -1; - } - - return 0; -} - -/* - * Block autoconfiguration: request size of the storage and permissions. - */ -static int dst_request_remote_config(struct dst_state *st) -{ - struct dst_node *n = st->node; - int err = -EINVAL; - struct dst_cmd *cmd = st->data; - - memset(cmd, 0, sizeof(struct dst_cmd)); - cmd->cmd = DST_CFG; - - dst_convert_cmd(cmd); - - err = dst_data_send_header(st->socket, cmd, sizeof(struct dst_cmd), 0); - if (err) - goto out; - - err = dst_data_recv_header(st->socket, cmd, sizeof(struct dst_cmd), 1); - if (err) - goto out; - - dst_convert_cmd(cmd); - - if (cmd->cmd != DST_CFG) { - err = -EINVAL; - dprintk("%s: checking result: cmd: %d, size reported: %llu.\n", - __func__, cmd->cmd, cmd->sector); - goto out; - } - - if (n->size != 0) - n->size = min_t(loff_t, n->size, cmd->sector); - else - n->size = cmd->sector; - - n->info->size = n->size; - st->permissions = cmd->rw; - -out: - dprintk("%s: n: %p, err: %d, size: %llu, permission: %x.\n", - __func__, n, err, n->size, st->permissions); - return err; -} - -/* - * Socket machinery. - */ - -#define DST_DEFAULT_TIMEO 20000 - -int dst_state_socket_create(struct dst_state *st) -{ - int err; - struct socket *sock; - struct dst_network_ctl *ctl = &st->ctl; - - err = sock_create(ctl->addr.sa_family, ctl->type, ctl->proto, &sock); - if (err < 0) - return err; - - sock->sk->sk_sndtimeo = sock->sk->sk_rcvtimeo = - msecs_to_jiffies(DST_DEFAULT_TIMEO); - sock->sk->sk_allocation = GFP_NOIO; - - st->socket = st->read_socket = sock; - return 0; -} - -void dst_state_socket_release(struct dst_state *st) -{ - dprintk("%s: st: %p, socket: %p, n: %p.\n", - __func__, st, st->socket, st->node); - if (st->socket) { - sock_release(st->socket); - st->socket = NULL; - st->read_socket = NULL; - } -} - -void dst_dump_addr(struct socket *sk, struct sockaddr *sa, char *str) -{ - if (sk->ops->family == AF_INET) { - struct sockaddr_in *sin = (struct sockaddr_in *)sa; - printk(KERN_INFO "%s %u.%u.%u.%u:%d.\n", str, - NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port)); - } else if (sk->ops->family == AF_INET6) { - struct sockaddr_in6 *sin = (struct sockaddr_in6 *)sa; - printk(KERN_INFO "%s %pi6:%d", - str, &sin->sin6_addr, ntohs(sin->sin6_port)); - } -} - -void dst_state_exit_connected(struct dst_state *st) -{ - if (st->socket) { - dst_poll_exit(st); - st->socket->ops->shutdown(st->socket, 2); - - dst_dump_addr(st->socket, (struct sockaddr *)&st->ctl.addr, - "Disconnected peer"); - dst_state_socket_release(st); - } -} - -static int dst_state_init_connected(struct dst_state *st) -{ - int err; - struct dst_network_ctl *ctl = &st->ctl; - - err = dst_state_socket_create(st); - if (err) - goto err_out_exit; - - err = kernel_connect(st->socket, (struct sockaddr *)&st->ctl.addr, - st->ctl.addr.sa_data_len, 0); - if (err) - goto err_out_release; - - err = dst_poll_init(st); - if (err) - goto err_out_release; - - dst_dump_addr(st->socket, (struct sockaddr *)&ctl->addr, - "Connected to peer"); - - return 0; - -err_out_release: - dst_state_socket_release(st); -err_out_exit: - return err; -} - -/* - * State reset is used to reconnect to the remote peer. - * May fail, but who cares, we will try again later. - */ -static inline void dst_state_reset_nolock(struct dst_state *st) -{ - dst_state_exit_connected(st); - dst_state_init_connected(st); -} - -static inline void dst_state_reset(struct dst_state *st) -{ - dst_state_lock(st); - dst_state_reset_nolock(st); - dst_state_unlock(st); -} - -/* - * Basic network sending/receiving functions. - * Blocked mode is used. - */ -static int dst_data_recv_raw(struct dst_state *st, void *buf, u64 size) -{ - struct msghdr msg; - struct kvec iov; - int err; - - BUG_ON(!size); - - iov.iov_base = buf; - iov.iov_len = size; - - msg.msg_iov = (struct iovec *)&iov; - msg.msg_iovlen = 1; - msg.msg_name = NULL; - msg.msg_namelen = 0; - msg.msg_control = NULL; - msg.msg_controllen = 0; - msg.msg_flags = MSG_DONTWAIT; - - err = kernel_recvmsg(st->socket, &msg, &iov, 1, iov.iov_len, - msg.msg_flags); - if (err <= 0) { - dprintk("%s: failed to recv data: size: %llu, err: %d.\n", - __func__, size, err); - if (err == 0) - err = -ECONNRESET; - - dst_state_exit_connected(st); - } - - return err; -} - -/* - * Ping command to early detect failed nodes. - */ -static int dst_send_ping(struct dst_state *st) -{ - struct dst_cmd *cmd = st->data; - int err = -ECONNRESET; - - dst_state_lock(st); - if (st->socket) { - memset(cmd, 0, sizeof(struct dst_cmd)); - - cmd->cmd = __cpu_to_be32(DST_PING); - - err = dst_data_send_header(st->socket, cmd, - sizeof(struct dst_cmd), 0); - } - dprintk("%s: st: %p, socket: %p, err: %d.\n", __func__, - st, st->socket, err); - dst_state_unlock(st); - - return err; -} - -/* - * Receiving function, which should either return error or read - * whole block request. If there was no traffic for a one second, - * send a ping, since remote node may die. - */ -int dst_data_recv(struct dst_state *st, void *data, unsigned int size) -{ - unsigned int revents = 0; - unsigned int err_mask = POLLERR | POLLHUP | POLLRDHUP; - unsigned int mask = err_mask | POLLIN; - struct dst_node *n = st->node; - int err = 0; - - while (size && !err) { - revents = dst_state_poll(st); - - if (!(revents & mask)) { - DEFINE_WAIT(wait); - - for (;;) { - prepare_to_wait(&st->thread_wait, &wait, - TASK_INTERRUPTIBLE); - if (!n->trans_scan_timeout || st->need_exit) - break; - - revents = dst_state_poll(st); - - if (revents & mask) - break; - - if (signal_pending(current)) - break; - - if (!schedule_timeout(HZ)) { - err = dst_send_ping(st); - if (err) - return err; - } - - continue; - } - finish_wait(&st->thread_wait, &wait); - } - - err = -ECONNRESET; - dst_state_lock(st); - - if (st->socket && (st->read_socket == st->socket) && - (revents & POLLIN)) { - err = dst_data_recv_raw(st, data, size); - if (err > 0) { - data += err; - size -= err; - err = 0; - } - } - - if (revents & err_mask || !st->socket) { - dprintk("%s: revents: %x, socket: %p, size: %u, " - "err: %d.\n", __func__, revents, - st->socket, size, err); - err = -ECONNRESET; - } - - dst_state_unlock(st); - - if (!n->trans_scan_timeout) - err = -ENODEV; - } - - return err; -} - -/* - * Send block autoconf reply. - */ -static int dst_process_cfg(struct dst_state *st) -{ - struct dst_node *n = st->node; - struct dst_cmd *cmd = st->data; - int err; - - cmd->sector = n->size; - cmd->rw = st->permissions; - - dst_convert_cmd(cmd); - - dst_state_lock(st); - err = dst_data_send_header(st->socket, cmd, sizeof(struct dst_cmd), 0); - dst_state_unlock(st); - - return err; -} - -/* - * Receive block IO from the network. - */ -static int dst_recv_bio(struct dst_state *st, struct bio *bio, - unsigned int total_size) -{ - struct bio_vec *bv; - int i, err; - void *data; - unsigned int sz; - - bio_for_each_segment(bv, bio, i) { - sz = min(total_size, bv->bv_len); - - dprintk("%s: bio: %llu/%u, total: %u, len: %u, sz: %u, " - "off: %u.\n", __func__, (u64)bio->bi_sector, - bio->bi_size, total_size, bv->bv_len, sz, - bv->bv_offset); - - data = kmap(bv->bv_page) + bv->bv_offset; - err = dst_data_recv(st, data, sz); - kunmap(bv->bv_page); - - bv->bv_len = sz; - - if (err) - return err; - - total_size -= sz; - if (total_size == 0) - break; - } - - return 0; -} - -/* - * Our block IO has just completed and arrived: get it. - */ -static int dst_process_io_response(struct dst_state *st) -{ - struct dst_node *n = st->node; - struct dst_cmd *cmd = st->data; - struct dst_trans *t; - int err = 0; - struct bio *bio; - - mutex_lock(&n->trans_lock); - t = dst_trans_search(n, cmd->id); - mutex_unlock(&n->trans_lock); - - if (!t) - goto err_out_exit; - - bio = t->bio; - - dprintk("%s: bio: %llu/%u, cmd_size: %u, csize: %u, dir: %lu.\n", - __func__, (u64)bio->bi_sector, bio->bi_size, cmd->size, - cmd->csize, bio_data_dir(bio)); - - if (bio_data_dir(bio) == READ) { - if (bio->bi_size != cmd->size - cmd->csize) - goto err_out_exit; - - if (dst_need_crypto(n)) { - err = dst_recv_cdata(st, t->cmd.hash); - if (err) - goto err_out_exit; - } - - err = dst_recv_bio(st, t->bio, bio->bi_size); - if (err) - goto err_out_exit; - - if (dst_need_crypto(n)) - return dst_trans_crypto(t); - } else { - err = -EBADMSG; - if (cmd->size || cmd->csize) - goto err_out_exit; - } - - dst_trans_remove(t); - dst_trans_put(t); - - return 0; - -err_out_exit: - return err; -} - -/* - * Receive crypto data. - */ -int dst_recv_cdata(struct dst_state *st, void *cdata) -{ - struct dst_cmd *cmd = st->data; - struct dst_node *n = st->node; - struct dst_crypto_ctl *c = &n->crypto; - int err; - - if (cmd->csize != c->crypto_attached_size) { - dprintk("%s: cmd: cmd: %u, sector: %llu, size: %u, " - "csize: %u != digest size %u.\n", - __func__, cmd->cmd, cmd->sector, cmd->size, - cmd->csize, c->crypto_attached_size); - err = -EINVAL; - goto err_out_exit; - } - - err = dst_data_recv(st, cdata, cmd->csize); - if (err) - goto err_out_exit; - - cmd->size -= cmd->csize; - return 0; - -err_out_exit: - return err; -} - -/* - * Receive the command and start its processing. - */ -static int dst_recv_processing(struct dst_state *st) -{ - int err = -EINTR; - struct dst_cmd *cmd = st->data; - - /* - * If socket will be reset after this statement, then - * dst_data_recv() will just fail and loop will - * start again, so it can be done without any locks. - * - * st->read_socket is needed to prevents state machine - * breaking between this data reading and subsequent one - * in protocol specific functions during connection reset. - * In case of reset we have to read next command and do - * not expect data for old command to magically appear in - * new connection. - */ - st->read_socket = st->socket; - err = dst_data_recv(st, cmd, sizeof(struct dst_cmd)); - if (err) - goto out_exit; - - dst_convert_cmd(cmd); - - dprintk("%s: cmd: %u, size: %u, csize: %u, id: %llu, " - "sector: %llu, flags: %llx, rw: %llx.\n", - __func__, cmd->cmd, cmd->size, - cmd->csize, cmd->id, cmd->sector, - cmd->flags, cmd->rw); - - /* - * This should catch protocol breakage and random garbage - * instead of commands. - */ - if (unlikely(cmd->csize > st->size - sizeof(struct dst_cmd))) { - err = -EBADMSG; - goto out_exit; - } - - err = -EPROTO; - switch (cmd->cmd) { - case DST_IO_RESPONSE: - err = dst_process_io_response(st); - break; - case DST_IO: - err = dst_process_io(st); - break; - case DST_CFG: - err = dst_process_cfg(st); - break; - case DST_PING: - err = 0; - break; - default: - break; - } - -out_exit: - return err; -} - -/* - * Receiving thread. For the client node we should try to reconnect, - * for accepted client we just drop the state and expect it to reconnect. - */ -static int dst_recv(void *init_data, void *schedule_data) -{ - struct dst_state *st = schedule_data; - struct dst_node *n = init_data; - int err = 0; - - dprintk("%s: start st: %p, n: %p, scan: %lu, need_exit: %d.\n", - __func__, st, n, n->trans_scan_timeout, st->need_exit); - - while (n->trans_scan_timeout && !st->need_exit) { - err = dst_recv_processing(st); - if (err < 0) { - if (!st->ctl.type) - break; - - if (!n->trans_scan_timeout || st->need_exit) - break; - - dst_state_reset(st); - msleep(1000); - } - } - - st->need_exit = 1; - wake_up(&st->thread_wait); - - dprintk("%s: freeing receiving socket st: %p.\n", __func__, st); - dst_state_lock(st); - dst_state_exit_connected(st); - dst_state_unlock(st); - dst_state_put(st); - - dprintk("%s: freed receiving socket st: %p.\n", __func__, st); - - return err; -} - -/* - * Network state dies here and borns couple of lines below. - * This object is the main network state processing engine: - * sending, receiving, reconnections, all network related - * tasks are handled on behalf of the state. - */ -static void dst_state_free(struct dst_state *st) -{ - dprintk("%s: st: %p.\n", __func__, st); - if (st->cleanup) - st->cleanup(st); - kfree(st->data); - kfree(st); -} - -struct dst_state *dst_state_alloc(struct dst_node *n) -{ - struct dst_state *st; - int err = -ENOMEM; - - st = kzalloc(sizeof(struct dst_state), GFP_KERNEL); - if (!st) - goto err_out_exit; - - st->node = n; - st->need_exit = 0; - - st->size = PAGE_SIZE; - st->data = kmalloc(st->size, GFP_KERNEL); - if (!st->data) - goto err_out_free; - - spin_lock_init(&st->request_lock); - INIT_LIST_HEAD(&st->request_list); - - mutex_init(&st->state_lock); - init_waitqueue_head(&st->thread_wait); - - /* - * One for processing thread, another one for node itself. - */ - atomic_set(&st->refcnt, 2); - - dprintk("%s: st: %p, n: %p.\n", __func__, st, st->node); - - return st; - -err_out_free: - kfree(st); -err_out_exit: - return ERR_PTR(err); -} - -int dst_state_schedule_receiver(struct dst_state *st) -{ - return thread_pool_schedule_private(st->node->pool, dst_thread_setup, - dst_recv, st, MAX_SCHEDULE_TIMEOUT, st->node); -} - -/* - * Initialize client's connection to the remote peer: allocate state, - * connect and perform block IO autoconfiguration. - */ -int dst_node_init_connected(struct dst_node *n, struct dst_network_ctl *r) -{ - struct dst_state *st; - int err = -ENOMEM; - - st = dst_state_alloc(n); - if (IS_ERR(st)) { - err = PTR_ERR(st); - goto err_out_exit; - } - memcpy(&st->ctl, r, sizeof(struct dst_network_ctl)); - - err = dst_state_init_connected(st); - if (err) - goto err_out_free_data; - - err = dst_request_remote_config(st); - if (err) - goto err_out_exit_connected; - n->state = st; - - err = dst_state_schedule_receiver(st); - if (err) - goto err_out_exit_connected; - - return 0; - -err_out_exit_connected: - dst_state_exit_connected(st); -err_out_free_data: - dst_state_free(st); -err_out_exit: - n->state = NULL; - return err; -} - -void dst_state_put(struct dst_state *st) -{ - dprintk("%s: st: %p, refcnt: %d.\n", - __func__, st, atomic_read(&st->refcnt)); - if (atomic_dec_and_test(&st->refcnt)) - dst_state_free(st); -} - -/* - * Send block IO to the network one by one using zero-copy ->sendpage(). - */ -int dst_send_bio(struct dst_state *st, struct dst_cmd *cmd, struct bio *bio) -{ - struct bio_vec *bv; - struct dst_crypto_ctl *c = &st->node->crypto; - int err, i = 0; - int flags = MSG_WAITALL; - - err = dst_data_send_header(st->socket, cmd, - sizeof(struct dst_cmd) + c->crypto_attached_size, bio->bi_vcnt); - if (err) - goto err_out_exit; - - bio_for_each_segment(bv, bio, i) { - if (i < bio->bi_vcnt - 1) - flags |= MSG_MORE; - - err = kernel_sendpage(st->socket, bv->bv_page, bv->bv_offset, - bv->bv_len, flags); - if (err <= 0) - goto err_out_exit; - } - - return 0; - -err_out_exit: - dprintk("%s: %d/%d, flags: %x, err: %d.\n", - __func__, i, bio->bi_vcnt, flags, err); - return err; -} - -/* - * Send transaction to the remote peer. - */ -int dst_trans_send(struct dst_trans *t) -{ - int err; - struct dst_state *st = t->n->state; - struct bio *bio = t->bio; - - dst_convert_cmd(&t->cmd); - - dst_state_lock(st); - if (!st->socket) { - err = dst_state_init_connected(st); - if (err) - goto err_out_unlock; - } - - if (bio_data_dir(bio) == WRITE) { - err = dst_send_bio(st, &t->cmd, t->bio); - } else { - err = dst_data_send_header(st->socket, &t->cmd, - sizeof(struct dst_cmd), 0); - } - if (err) - goto err_out_reset; - - dst_state_unlock(st); - return 0; - -err_out_reset: - dst_state_reset_nolock(st); -err_out_unlock: - dst_state_unlock(st); - - return err; -} diff --git a/drivers/staging/dst/thread_pool.c b/drivers/staging/dst/thread_pool.c deleted file mode 100644 index 29a82b2602f3..000000000000 --- a/drivers/staging/dst/thread_pool.c +++ /dev/null @@ -1,348 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include - -/* - * Thread pool abstraction allows to schedule a work to be performed - * on behalf of kernel thread. One does not operate with threads itself, - * instead user provides setup and cleanup callbacks for thread pool itself, - * and action and cleanup callbacks for each submitted work. - * - * Each worker has private data initialized at creation time and data, - * provided by user at scheduling time. - * - * When action is being performed, thread can not be used by other users, - * instead they will sleep until there is free thread to pick their work. - */ -struct thread_pool_worker { - struct list_head worker_entry; - - struct task_struct *thread; - - struct thread_pool *pool; - - int error; - int has_data; - int need_exit; - unsigned int id; - - wait_queue_head_t wait; - - void *private; - void *schedule_data; - - int (*action)(void *private, void *schedule_data); - void (*cleanup)(void *private); -}; - -static void thread_pool_exit_worker(struct thread_pool_worker *w) -{ - kthread_stop(w->thread); - - w->cleanup(w->private); - kfree(w); -} - -/* - * Called to mark thread as ready and allow users to schedule new work. - */ -static void thread_pool_worker_make_ready(struct thread_pool_worker *w) -{ - struct thread_pool *p = w->pool; - - mutex_lock(&p->thread_lock); - - if (!w->need_exit) { - list_move_tail(&w->worker_entry, &p->ready_list); - w->has_data = 0; - mutex_unlock(&p->thread_lock); - - wake_up(&p->wait); - } else { - p->thread_num--; - list_del(&w->worker_entry); - mutex_unlock(&p->thread_lock); - - thread_pool_exit_worker(w); - } -} - -/* - * Thread action loop: waits until there is new work. - */ -static int thread_pool_worker_func(void *data) -{ - struct thread_pool_worker *w = data; - - while (!kthread_should_stop()) { - wait_event_interruptible(w->wait, - kthread_should_stop() || w->has_data); - - if (kthread_should_stop()) - break; - - if (!w->has_data) - continue; - - w->action(w->private, w->schedule_data); - thread_pool_worker_make_ready(w); - } - - return 0; -} - -/* - * Remove single worker without specifying which one. - */ -void thread_pool_del_worker(struct thread_pool *p) -{ - struct thread_pool_worker *w = NULL; - - while (!w && p->thread_num) { - wait_event(p->wait, !list_empty(&p->ready_list) || - !p->thread_num); - - dprintk("%s: locking list_empty: %d, thread_num: %d.\n", - __func__, list_empty(&p->ready_list), - p->thread_num); - - mutex_lock(&p->thread_lock); - if (!list_empty(&p->ready_list)) { - w = list_first_entry(&p->ready_list, - struct thread_pool_worker, - worker_entry); - - dprintk("%s: deleting w: %p, thread_num: %d, " - "list: %p [%p.%p].\n", __func__, - w, p->thread_num, &p->ready_list, - p->ready_list.prev, p->ready_list.next); - - p->thread_num--; - list_del(&w->worker_entry); - } - mutex_unlock(&p->thread_lock); - } - - if (w) - thread_pool_exit_worker(w); - dprintk("%s: deleted w: %p, thread_num: %d.\n", - __func__, w, p->thread_num); -} - -/* - * Remove a worker with given ID. - */ -void thread_pool_del_worker_id(struct thread_pool *p, unsigned int id) -{ - struct thread_pool_worker *w; - int found = 0; - - mutex_lock(&p->thread_lock); - list_for_each_entry(w, &p->ready_list, worker_entry) { - if (w->id == id) { - found = 1; - p->thread_num--; - list_del(&w->worker_entry); - break; - } - } - - if (!found) { - list_for_each_entry(w, &p->active_list, worker_entry) { - if (w->id == id) { - w->need_exit = 1; - break; - } - } - } - mutex_unlock(&p->thread_lock); - - if (found) - thread_pool_exit_worker(w); -} - -/* - * Add new worker thread with given parameters. - * If initialization callback fails, return error. - */ -int thread_pool_add_worker(struct thread_pool *p, - char *name, - unsigned int id, - void *(*init)(void *private), - void (*cleanup)(void *private), - void *private) -{ - struct thread_pool_worker *w; - int err = -ENOMEM; - - w = kzalloc(sizeof(struct thread_pool_worker), GFP_KERNEL); - if (!w) - goto err_out_exit; - - w->pool = p; - init_waitqueue_head(&w->wait); - w->cleanup = cleanup; - w->id = id; - - w->thread = kthread_run(thread_pool_worker_func, w, "%s", name); - if (IS_ERR(w->thread)) { - err = PTR_ERR(w->thread); - goto err_out_free; - } - - w->private = init(private); - if (IS_ERR(w->private)) { - err = PTR_ERR(w->private); - goto err_out_stop_thread; - } - - mutex_lock(&p->thread_lock); - list_add_tail(&w->worker_entry, &p->ready_list); - p->thread_num++; - mutex_unlock(&p->thread_lock); - - return 0; - -err_out_stop_thread: - kthread_stop(w->thread); -err_out_free: - kfree(w); -err_out_exit: - return err; -} - -/* - * Destroy the whole pool. - */ -void thread_pool_destroy(struct thread_pool *p) -{ - while (p->thread_num) { - dprintk("%s: num: %d.\n", __func__, p->thread_num); - thread_pool_del_worker(p); - } - - kfree(p); -} - -/* - * Create a pool with given number of threads. - * They will have sequential IDs started from zero. - */ -struct thread_pool *thread_pool_create(int num, char *name, - void *(*init)(void *private), - void (*cleanup)(void *private), - void *private) -{ - struct thread_pool_worker *w, *tmp; - struct thread_pool *p; - int err = -ENOMEM; - int i; - - p = kzalloc(sizeof(struct thread_pool), GFP_KERNEL); - if (!p) - goto err_out_exit; - - init_waitqueue_head(&p->wait); - mutex_init(&p->thread_lock); - INIT_LIST_HEAD(&p->ready_list); - INIT_LIST_HEAD(&p->active_list); - p->thread_num = 0; - - for (i = 0; i < num; ++i) { - err = thread_pool_add_worker(p, name, i, init, - cleanup, private); - if (err) - goto err_out_free_all; - } - - return p; - -err_out_free_all: - list_for_each_entry_safe(w, tmp, &p->ready_list, worker_entry) { - list_del(&w->worker_entry); - thread_pool_exit_worker(w); - } - kfree(p); -err_out_exit: - return ERR_PTR(err); -} - -/* - * Schedule execution of the action on a given thread, - * provided ID pointer has to match previously stored - * private data. - */ -int thread_pool_schedule_private(struct thread_pool *p, - int (*setup)(void *private, void *data), - int (*action)(void *private, void *data), - void *data, long timeout, void *id) -{ - struct thread_pool_worker *w, *tmp, *worker = NULL; - int err = 0; - - while (!worker && !err) { - timeout = wait_event_interruptible_timeout(p->wait, - !list_empty(&p->ready_list), - timeout); - - if (!timeout) { - err = -ETIMEDOUT; - break; - } - - worker = NULL; - mutex_lock(&p->thread_lock); - list_for_each_entry_safe(w, tmp, &p->ready_list, worker_entry) { - if (id && id != w->private) - continue; - - worker = w; - - list_move_tail(&w->worker_entry, &p->active_list); - - err = setup(w->private, data); - if (!err) { - w->schedule_data = data; - w->action = action; - w->has_data = 1; - wake_up(&w->wait); - } else { - list_move_tail(&w->worker_entry, - &p->ready_list); - } - - break; - } - mutex_unlock(&p->thread_lock); - } - - return err; -} - -/* - * Schedule execution on arbitrary thread from the pool. - */ -int thread_pool_schedule(struct thread_pool *p, - int (*setup)(void *private, void *data), - int (*action)(void *private, void *data), - void *data, long timeout) -{ - return thread_pool_schedule_private(p, setup, - action, data, timeout, NULL); -} diff --git a/drivers/staging/dst/trans.c b/drivers/staging/dst/trans.c deleted file mode 100644 index 1c36a6bc31d5..000000000000 --- a/drivers/staging/dst/trans.c +++ /dev/null @@ -1,337 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include - -/* - * Transaction memory pool size. - */ -static int dst_mempool_num = 32; -module_param(dst_mempool_num, int, 0644); - -/* - * Transaction tree management. - */ -static inline int dst_trans_cmp(dst_gen_t gen, dst_gen_t new) -{ - if (gen < new) - return 1; - if (gen > new) - return -1; - return 0; -} - -struct dst_trans *dst_trans_search(struct dst_node *node, dst_gen_t gen) -{ - struct rb_root *root = &node->trans_root; - struct rb_node *n = root->rb_node; - struct dst_trans *t, *ret = NULL; - int cmp; - - while (n) { - t = rb_entry(n, struct dst_trans, trans_entry); - - cmp = dst_trans_cmp(t->gen, gen); - if (cmp < 0) - n = n->rb_left; - else if (cmp > 0) - n = n->rb_right; - else { - ret = t; - break; - } - } - - dprintk("%s: %s transaction: id: %llu.\n", __func__, - (ret) ? "found" : "not found", gen); - - return ret; -} - -static int dst_trans_insert(struct dst_trans *new) -{ - struct rb_root *root = &new->n->trans_root; - struct rb_node **n = &root->rb_node, *parent = NULL; - struct dst_trans *ret = NULL, *t; - int cmp; - - while (*n) { - parent = *n; - - t = rb_entry(parent, struct dst_trans, trans_entry); - - cmp = dst_trans_cmp(t->gen, new->gen); - if (cmp < 0) - n = &parent->rb_left; - else if (cmp > 0) - n = &parent->rb_right; - else { - ret = t; - break; - } - } - - new->send_time = jiffies; - if (ret) { - printk(KERN_DEBUG "%s: exist: old: gen: %llu, bio: %llu/%u, " - "send_time: %lu, new: gen: %llu, bio: %llu/%u, " - "send_time: %lu.\n", __func__, - ret->gen, (u64)ret->bio->bi_sector, - ret->bio->bi_size, ret->send_time, - new->gen, (u64)new->bio->bi_sector, - new->bio->bi_size, new->send_time); - return -EEXIST; - } - - rb_link_node(&new->trans_entry, parent, n); - rb_insert_color(&new->trans_entry, root); - - dprintk("%s: inserted: gen: %llu, bio: %llu/%u, send_time: %lu.\n", - __func__, new->gen, (u64)new->bio->bi_sector, - new->bio->bi_size, new->send_time); - - return 0; -} - -int dst_trans_remove_nolock(struct dst_trans *t) -{ - struct dst_node *n = t->n; - - if (t->trans_entry.rb_parent_color) { - rb_erase(&t->trans_entry, &n->trans_root); - t->trans_entry.rb_parent_color = 0; - } - return 0; -} - -int dst_trans_remove(struct dst_trans *t) -{ - int ret; - struct dst_node *n = t->n; - - mutex_lock(&n->trans_lock); - ret = dst_trans_remove_nolock(t); - mutex_unlock(&n->trans_lock); - - return ret; -} - -/* - * When transaction is completed and there are no more users, - * we complete appriate block IO request with given error status. - */ -void dst_trans_put(struct dst_trans *t) -{ - if (atomic_dec_and_test(&t->refcnt)) { - struct bio *bio = t->bio; - - dprintk("%s: completed t: %p, gen: %llu, bio: %p.\n", - __func__, t, t->gen, bio); - - bio_endio(bio, t->error); - bio_put(bio); - - dst_node_put(t->n); - mempool_free(t, t->n->trans_pool); - } -} - -/* - * Process given block IO request: allocate transaction, insert it into the tree - * and send/schedule crypto processing. - */ -int dst_process_bio(struct dst_node *n, struct bio *bio) -{ - struct dst_trans *t; - int err = -ENOMEM; - - t = mempool_alloc(n->trans_pool, GFP_NOFS); - if (!t) - goto err_out_exit; - - t->n = dst_node_get(n); - t->bio = bio; - t->error = 0; - t->retries = 0; - atomic_set(&t->refcnt, 1); - t->gen = atomic_long_inc_return(&n->gen); - - t->enc = bio_data_dir(bio); - dst_bio_to_cmd(bio, &t->cmd, DST_IO, t->gen); - - mutex_lock(&n->trans_lock); - err = dst_trans_insert(t); - mutex_unlock(&n->trans_lock); - if (err) - goto err_out_free; - - dprintk("%s: gen: %llu, bio: %llu/%u, dir/enc: %d, need_crypto: %d.\n", - __func__, t->gen, (u64)bio->bi_sector, - bio->bi_size, t->enc, dst_need_crypto(n)); - - if (dst_need_crypto(n) && t->enc) - dst_trans_crypto(t); - else - dst_trans_send(t); - - return 0; - -err_out_free: - dst_node_put(n); - mempool_free(t, n->trans_pool); -err_out_exit: - bio_endio(bio, err); - bio_put(bio); - return err; -} - -/* - * Scan for timeout/stale transactions. - * Each transaction is being resent multiple times before error completion. - */ -static void dst_trans_scan(struct work_struct *work) -{ - struct dst_node *n = container_of(work, struct dst_node, - trans_work.work); - struct rb_node *rb_node; - struct dst_trans *t; - unsigned long timeout = n->trans_scan_timeout; - int num = 10 * n->trans_max_retries; - - mutex_lock(&n->trans_lock); - - for (rb_node = rb_first(&n->trans_root); rb_node; ) { - t = rb_entry(rb_node, struct dst_trans, trans_entry); - - if (timeout && time_after(t->send_time + timeout, jiffies) - && t->retries == 0) - break; -#if 0 - dprintk("%s: t: %p, gen: %llu, n: %s, retries: %u, max: %u.\n", - __func__, t, t->gen, n->name, - t->retries, n->trans_max_retries); -#endif - if (--num == 0) - break; - - dst_trans_get(t); - - rb_node = rb_next(rb_node); - - if (timeout && (++t->retries < n->trans_max_retries)) { - dst_trans_send(t); - } else { - t->error = -ETIMEDOUT; - dst_trans_remove_nolock(t); - dst_trans_put(t); - } - - dst_trans_put(t); - } - - mutex_unlock(&n->trans_lock); - - /* - * If no timeout specified then system is in the middle of exiting - * process, so no need to reschedule scanning process again. - */ - if (timeout) { - if (!num) - timeout = HZ; - schedule_delayed_work(&n->trans_work, timeout); - } -} - -/* - * Flush all transactions and mark them as timed out. - * Destroy transaction pools. - */ -void dst_node_trans_exit(struct dst_node *n) -{ - struct dst_trans *t; - struct rb_node *rb_node; - - if (!n->trans_cache) - return; - - dprintk("%s: n: %p, cancelling the work.\n", __func__, n); - cancel_delayed_work_sync(&n->trans_work); - flush_scheduled_work(); - dprintk("%s: n: %p, work has been cancelled.\n", __func__, n); - - for (rb_node = rb_first(&n->trans_root); rb_node; ) { - t = rb_entry(rb_node, struct dst_trans, trans_entry); - - dprintk("%s: t: %p, gen: %llu, n: %s.\n", - __func__, t, t->gen, n->name); - - rb_node = rb_next(rb_node); - - t->error = -ETIMEDOUT; - dst_trans_remove_nolock(t); - dst_trans_put(t); - } - - mempool_destroy(n->trans_pool); - kmem_cache_destroy(n->trans_cache); -} - -/* - * Initialize transaction storage for given node. - * Transaction stores not only control information, - * but also network command and crypto data (if needed) - * to reduce number of allocations. Thus transaction size - * differs from node to node. - */ -int dst_node_trans_init(struct dst_node *n, unsigned int size) -{ - /* - * We need this, since node with given name can be dropped from the - * hash table, but be still alive, so subsequent creation of the node - * with the same name may collide with existing cache name. - */ - - snprintf(n->cache_name, sizeof(n->cache_name), "%s-%p", n->name, n); - - n->trans_cache = kmem_cache_create(n->cache_name, - size + n->crypto.crypto_attached_size, - 0, 0, NULL); - if (!n->trans_cache) - goto err_out_exit; - - n->trans_pool = mempool_create_slab_pool(dst_mempool_num, - n->trans_cache); - if (!n->trans_pool) - goto err_out_cache_destroy; - - mutex_init(&n->trans_lock); - n->trans_root = RB_ROOT; - - INIT_DELAYED_WORK(&n->trans_work, dst_trans_scan); - schedule_delayed_work(&n->trans_work, n->trans_scan_timeout); - - dprintk("%s: n: %p, size: %u, crypto: %u.\n", - __func__, n, size, n->crypto.crypto_attached_size); - - return 0; - -err_out_cache_destroy: - kmem_cache_destroy(n->trans_cache); -err_out_exit: - return -ENOMEM; -} diff --git a/include/linux/dst.h b/include/linux/dst.h deleted file mode 100644 index e26fed84b1aa..000000000000 --- a/include/linux/dst.h +++ /dev/null @@ -1,587 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __DST_H -#define __DST_H - -#include -#include - -#define DST_NAMELEN 32 -#define DST_NAME "dst" - -enum { - /* Remove node with given id from storage */ - DST_DEL_NODE = 0, - /* Add remote node with given id to the storage */ - DST_ADD_REMOTE, - /* Add local node with given id to the storage to be exported and used by remote peers */ - DST_ADD_EXPORT, - /* Crypto initialization command (hash/cipher used to protect the connection) */ - DST_CRYPTO, - /* Security attributes for given connection (permissions for example) */ - DST_SECURITY, - /* Register given node in the block layer subsystem */ - DST_START, - DST_CMD_MAX -}; - -struct dst_ctl -{ - /* Storage name */ - char name[DST_NAMELEN]; - /* Command flags */ - __u32 flags; - /* Command itself (see above) */ - __u32 cmd; - /* Maximum number of pages per single request in this device */ - __u32 max_pages; - /* Stale/error transaction scanning timeout in milliseconds */ - __u32 trans_scan_timeout; - /* Maximum number of retry sends before completing transaction as broken */ - __u32 trans_max_retries; - /* Storage size */ - __u64 size; -}; - -/* Reply command carries completion status */ -struct dst_ctl_ack -{ - struct cn_msg msg; - int error; - int unused[3]; -}; - -/* - * Unfortunaltely socket address structure is not exported to userspace - * and is redefined there. - */ -#define SADDR_MAX_DATA 128 - -struct saddr { - /* address family, AF_xxx */ - unsigned short sa_family; - /* 14 bytes of protocol address */ - char sa_data[SADDR_MAX_DATA]; - /* Number of bytes used in sa_data */ - unsigned short sa_data_len; -}; - -/* Address structure */ -struct dst_network_ctl -{ - /* Socket type: datagram, stream...*/ - unsigned int type; - /* Let me guess, is it a Jupiter diameter? */ - unsigned int proto; - /* Peer's address */ - struct saddr addr; -}; - -struct dst_crypto_ctl -{ - /* Cipher and hash names */ - char cipher_algo[DST_NAMELEN]; - char hash_algo[DST_NAMELEN]; - - /* Key sizes. Can be zero for digest for example */ - unsigned int cipher_keysize, hash_keysize; - /* Alignment. Calculated by the DST itself. */ - unsigned int crypto_attached_size; - /* Number of threads to perform crypto operations */ - int thread_num; -}; - -/* Export security attributes have this bits checked in when client connects */ -#define DST_PERM_READ (1<<0) -#define DST_PERM_WRITE (1<<1) - -/* - * Right now it is simple model, where each remote address - * is assigned to set of permissions it is allowed to perform. - * In real world block device does not know anything but - * reading and writing, so it should be more than enough. - */ -struct dst_secure_user -{ - unsigned int permissions; - struct saddr addr; -}; - -/* - * Export control command: device to export and network address to accept - * clients to work with given device - */ -struct dst_export_ctl -{ - char device[DST_NAMELEN]; - struct dst_network_ctl ctl; -}; - -enum { - DST_CFG = 1, /* Request remote configuration */ - DST_IO, /* IO command */ - DST_IO_RESPONSE, /* IO response */ - DST_PING, /* Keepalive message */ - DST_NCMD_MAX, -}; - -struct dst_cmd -{ - /* Network command itself, see above */ - __u32 cmd; - /* - * Size of the attached data - * (in most cases, for READ command it means how many bytes were requested) - */ - __u32 size; - /* Crypto size: number of attached bytes with digest/hmac */ - __u32 csize; - /* Here we can carry secret data */ - __u32 reserved; - /* Read/write bits, see how they are encoded in bio structure */ - __u64 rw; - /* BIO flags */ - __u64 flags; - /* Unique command id (like transaction ID) */ - __u64 id; - /* Sector to start IO from */ - __u64 sector; - /* Hash data is placed after this header */ - __u8 hash[0]; -}; - -/* - * Convert command to/from network byte order. - * We do not use hton*() functions, since there is - * no 64-bit implementation. - */ -static inline void dst_convert_cmd(struct dst_cmd *c) -{ - c->cmd = __cpu_to_be32(c->cmd); - c->csize = __cpu_to_be32(c->csize); - c->size = __cpu_to_be32(c->size); - c->sector = __cpu_to_be64(c->sector); - c->id = __cpu_to_be64(c->id); - c->flags = __cpu_to_be64(c->flags); - c->rw = __cpu_to_be64(c->rw); -} - -/* Transaction id */ -typedef __u64 dst_gen_t; - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_DST_DEBUG -#define dprintk(f, a...) printk(KERN_NOTICE f, ##a) -#else -static inline void __attribute__ ((format (printf, 1, 2))) - dprintk(const char *fmt, ...) {} -#endif - -struct dst_node; - -struct dst_trans -{ - /* DST node we are working with */ - struct dst_node *n; - - /* Entry inside transaction tree */ - struct rb_node trans_entry; - - /* Merlin kills this transaction when this memory cell equals zero */ - atomic_t refcnt; - - /* How this transaction should be processed by crypto engine */ - short enc; - /* How many times this transaction was resent */ - short retries; - /* Completion status */ - int error; - - /* When did we send it to the remote peer */ - long send_time; - - /* My name is... - * Well, computers does not speak, they have unique id instead */ - dst_gen_t gen; - - /* Block IO we are working with */ - struct bio *bio; - - /* Network command for above block IO request */ - struct dst_cmd cmd; -}; - -struct dst_crypto_engine -{ - /* What should we do with all block requests */ - struct crypto_hash *hash; - struct crypto_ablkcipher *cipher; - - /* Pool of pages used to encrypt data into before sending */ - int page_num; - struct page **pages; - - /* What to do with current request */ - int enc; - /* Who we are and where do we go */ - struct scatterlist *src, *dst; - - /* Maximum timeout waiting for encryption to be completed */ - long timeout; - /* IV is a 64-bit sequential counter */ - u64 iv; - - /* Secret data */ - void *private; - - /* Cached temporary data lives here */ - int size; - void *data; -}; - -struct dst_state -{ - /* The main state protection */ - struct mutex state_lock; - - /* Polling machinery for sockets */ - wait_queue_t wait; - wait_queue_head_t *whead; - /* Most of events are being waited here */ - wait_queue_head_t thread_wait; - - /* Who owns this? */ - struct dst_node *node; - - /* Network address for this state */ - struct dst_network_ctl ctl; - - /* Permissions to work with: read-only or rw connection */ - u32 permissions; - - /* Called when we need to clean private data */ - void (* cleanup)(struct dst_state *st); - - /* Used by the server: BIO completion queues BIOs here */ - struct list_head request_list; - spinlock_t request_lock; - - /* Guess what? No, it is not number of planets */ - atomic_t refcnt; - - /* This flags is set when connection should be dropped */ - int need_exit; - - /* - * Socket to work with. Second pointer is used for - * lockless check if socket was changed before performing - * next action (like working with cached polling result) - */ - struct socket *socket, *read_socket; - - /* Cached preallocated data */ - void *data; - unsigned int size; - - /* Currently processed command */ - struct dst_cmd cmd; -}; - -struct dst_info -{ - /* Device size */ - u64 size; - - /* Local device name for export devices */ - char local[DST_NAMELEN]; - - /* Network setup */ - struct dst_network_ctl net; - - /* Sysfs bits use this */ - struct device device; -}; - -struct dst_node -{ - struct list_head node_entry; - - /* Hi, my name is stored here */ - char name[DST_NAMELEN]; - /* My cache name is stored here */ - char cache_name[DST_NAMELEN]; - - /* Block device attached to given node. - * Only valid for exporting nodes */ - struct block_device *bdev; - /* Network state machine for given peer */ - struct dst_state *state; - - /* Block IO machinery */ - struct request_queue *queue; - struct gendisk *disk; - - /* Number of threads in processing pool */ - int thread_num; - /* Maximum number of pages in single IO */ - int max_pages; - - /* I'm that big in bytes */ - loff_t size; - - /* Exported to userspace node information */ - struct dst_info *info; - - /* - * Security attribute list. - * Used only by exporting node currently. - */ - struct list_head security_list; - struct mutex security_lock; - - /* - * When this unerflows below zero, university collapses. - * But this will not happen, since node will be freed, - * when reference counter reaches zero. - */ - atomic_t refcnt; - - /* How precisely should I be started? */ - int (*start)(struct dst_node *); - - /* Crypto capabilities */ - struct dst_crypto_ctl crypto; - u8 *hash_key; - u8 *cipher_key; - - /* Pool of processing thread */ - struct thread_pool *pool; - - /* Transaction IDs live here */ - atomic_long_t gen; - - /* - * How frequently and how many times transaction - * tree should be scanned to drop stale objects. - */ - long trans_scan_timeout; - int trans_max_retries; - - /* Small gnomes live here */ - struct rb_root trans_root; - struct mutex trans_lock; - - /* - * Transaction cache/memory pool. - * It is big enough to contain not only transaction - * itself, but additional crypto data (digest/hmac). - */ - struct kmem_cache *trans_cache; - mempool_t *trans_pool; - - /* This entity scans transaction tree */ - struct delayed_work trans_work; - - wait_queue_head_t wait; -}; - -/* Kernel representation of the security attribute */ -struct dst_secure -{ - struct list_head sec_entry; - struct dst_secure_user sec; -}; - -int dst_process_bio(struct dst_node *n, struct bio *bio); - -int dst_node_init_connected(struct dst_node *n, struct dst_network_ctl *r); -int dst_node_init_listened(struct dst_node *n, struct dst_export_ctl *le); - -static inline struct dst_state *dst_state_get(struct dst_state *st) -{ - BUG_ON(atomic_read(&st->refcnt) == 0); - atomic_inc(&st->refcnt); - return st; -} - -void dst_state_put(struct dst_state *st); - -struct dst_state *dst_state_alloc(struct dst_node *n); -int dst_state_socket_create(struct dst_state *st); -void dst_state_socket_release(struct dst_state *st); - -void dst_state_exit_connected(struct dst_state *st); - -int dst_state_schedule_receiver(struct dst_state *st); - -void dst_dump_addr(struct socket *sk, struct sockaddr *sa, char *str); - -static inline void dst_state_lock(struct dst_state *st) -{ - mutex_lock(&st->state_lock); -} - -static inline void dst_state_unlock(struct dst_state *st) -{ - mutex_unlock(&st->state_lock); -} - -void dst_poll_exit(struct dst_state *st); -int dst_poll_init(struct dst_state *st); - -static inline unsigned int dst_state_poll(struct dst_state *st) -{ - unsigned int revents = POLLHUP | POLLERR; - - dst_state_lock(st); - if (st->socket) - revents = st->socket->ops->poll(NULL, st->socket, NULL); - dst_state_unlock(st); - - return revents; -} - -static inline int dst_thread_setup(void *private, void *data) -{ - return 0; -} - -void dst_node_put(struct dst_node *n); - -static inline struct dst_node *dst_node_get(struct dst_node *n) -{ - atomic_inc(&n->refcnt); - return n; -} - -int dst_data_recv(struct dst_state *st, void *data, unsigned int size); -int dst_recv_cdata(struct dst_state *st, void *cdata); -int dst_data_send_header(struct socket *sock, - void *data, unsigned int size, int more); - -int dst_send_bio(struct dst_state *st, struct dst_cmd *cmd, struct bio *bio); - -int dst_process_io(struct dst_state *st); -int dst_export_crypto(struct dst_node *n, struct bio *bio); -int dst_export_send_bio(struct bio *bio); -int dst_start_export(struct dst_node *n); - -int __init dst_export_init(void); -void dst_export_exit(void); - -/* Private structure for export block IO requests */ -struct dst_export_priv -{ - struct list_head request_entry; - struct dst_state *state; - struct bio *bio; - struct dst_cmd cmd; -}; - -static inline void dst_trans_get(struct dst_trans *t) -{ - atomic_inc(&t->refcnt); -} - -struct dst_trans *dst_trans_search(struct dst_node *node, dst_gen_t gen); -int dst_trans_remove(struct dst_trans *t); -int dst_trans_remove_nolock(struct dst_trans *t); -void dst_trans_put(struct dst_trans *t); - -/* - * Convert bio into network command. - */ -static inline void dst_bio_to_cmd(struct bio *bio, struct dst_cmd *cmd, - u32 command, u64 id) -{ - cmd->cmd = command; - cmd->flags = (bio->bi_flags << BIO_POOL_BITS) >> BIO_POOL_BITS; - cmd->rw = bio->bi_rw; - cmd->size = bio->bi_size; - cmd->csize = 0; - cmd->id = id; - cmd->sector = bio->bi_sector; -}; - -int dst_trans_send(struct dst_trans *t); -int dst_trans_crypto(struct dst_trans *t); - -int dst_node_crypto_init(struct dst_node *n, struct dst_crypto_ctl *ctl); -void dst_node_crypto_exit(struct dst_node *n); - -static inline int dst_need_crypto(struct dst_node *n) -{ - struct dst_crypto_ctl *c = &n->crypto; - /* - * Logical OR is appropriate here, but boolean one produces - * more optimal code, so it is used instead. - */ - return (c->hash_algo[0] | c->cipher_algo[0]); -} - -int dst_node_trans_init(struct dst_node *n, unsigned int size); -void dst_node_trans_exit(struct dst_node *n); - -/* - * Pool of threads. - * Ready list contains threads currently free to be used, - * active one contains threads with some work scheduled for them. - * Caller can wait in given queue when thread is ready. - */ -struct thread_pool -{ - int thread_num; - struct mutex thread_lock; - struct list_head ready_list, active_list; - - wait_queue_head_t wait; -}; - -void thread_pool_del_worker(struct thread_pool *p); -void thread_pool_del_worker_id(struct thread_pool *p, unsigned int id); -int thread_pool_add_worker(struct thread_pool *p, - char *name, - unsigned int id, - void *(* init)(void *data), - void (* cleanup)(void *data), - void *data); - -void thread_pool_destroy(struct thread_pool *p); -struct thread_pool *thread_pool_create(int num, char *name, - void *(* init)(void *data), - void (* cleanup)(void *data), - void *data); - -int thread_pool_schedule(struct thread_pool *p, - int (* setup)(void *stored_private, void *setup_data), - int (* action)(void *stored_private, void *setup_data), - void *setup_data, long timeout); -int thread_pool_schedule_private(struct thread_pool *p, - int (* setup)(void *private, void *data), - int (* action)(void *private, void *data), - void *data, long timeout, void *id); - -#endif /* __KERNEL__ */ -#endif /* __DST_H */ -- GitLab From d4c3a56587af3edbe5f618b20e800e9f9fde13cb Mon Sep 17 00:00:00 2001 From: Bernd Porr Date: Fri, 27 Nov 2009 12:00:53 +0000 Subject: [PATCH 570/618] Staging: comedi: usbdux.c: fix locking up of the driver when the comedi ringbuffer runs empty Jan-Matthias Braun spotted a bug which locks up the driver when the comedi ring buffer runs empty and provided a patch. The driver would still send the data to comedi but the reader won't wake up any more. What's required is setting the flag COMEDI_CB_BLOCK after new data has arrived which wakes up the reader and therefore the read() command. Signed-off-by: Bernd Porr Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbdux.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 06c020466298..9a1b559c4b0d 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -1,4 +1,4 @@ -#define DRIVER_VERSION "v2.3" +#define DRIVER_VERSION "v2.4" #define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com" #define DRIVER_DESC "Stirling/ITL USB-DUX -- Bernd.Porr@f2s.com" /* @@ -81,6 +81,8 @@ sampling rate. If you sample two channels you get 4kHz and so on. * 2.1: changed PWM API * 2.2: added firmware kernel request to fix an udev problem * 2.3: corrected a bug in bulk timeouts which were far too short + * 2.4: fixed a bug which causes the driver to hang when it ran out of data. + * Thanks to Jan-Matthias Braun and Ian to spot the bug and fix it. * */ @@ -532,6 +534,7 @@ static void usbduxsub_ai_IsocIrq(struct urb *urb) } } /* tell comedi that data is there */ + s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS; comedi_event(this_usbduxsub->comedidev, s); } -- GitLab From d103bef45180892515345e761f42db5601de9846 Mon Sep 17 00:00:00 2001 From: Bernd Porr Date: Fri, 27 Nov 2009 12:07:48 +0000 Subject: [PATCH 571/618] Staging: comedi: removed "depricated" from COMEDI_CB_BLOCK The flag COMEDI_CB_BLOCK was marked as "depricated in the header file". However, this flag is important to wake up the data-reader (and writer) after new data has arrived from(for) the DAQ card. Signed-off-by: Bernd Porr Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h index ccc5cdc008c6..b559a9c2f857 100644 --- a/drivers/staging/comedi/comedi.h +++ b/drivers/staging/comedi/comedi.h @@ -451,7 +451,7 @@ #define COMEDI_CB_EOS 1 /* end of scan */ #define COMEDI_CB_EOA 2 /* end of acquisition */ -#define COMEDI_CB_BLOCK 4 /* DEPRECATED: convenient block size */ +#define COMEDI_CB_BLOCK 4 /* data has arrived: wakes up read() / write() */ #define COMEDI_CB_EOBUF 8 /* DEPRECATED: end of buffer */ #define COMEDI_CB_ERROR 16 /* card error during acquisition */ #define COMEDI_CB_OVERFLOW 32 /* buffer overflow/underflow */ -- GitLab From fa5c5f4ce0c9ba03a670c640cad17e14cb35678b Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 30 Nov 2009 10:59:27 +0000 Subject: [PATCH 572/618] Staging: comedi: jr3_pci: Don't ioremap too much space. Check result. For the JR3/PCI cards, the size of the PCIBAR0 region depends on the number of channels. Don't try and ioremap space for 4 channels if the card has fewer channels. Also check for ioremap failure. Thanks to Anders Blomdell for input and Sami Hussein for testing. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/jr3_pci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c index 0d2c2eb23b23..bd397840dcba 100644 --- a/drivers/staging/comedi/drivers/jr3_pci.c +++ b/drivers/staging/comedi/drivers/jr3_pci.c @@ -849,8 +849,11 @@ static int jr3_pci_attach(struct comedi_device *dev, } devpriv->pci_enabled = 1; - devpriv->iobase = - ioremap(pci_resource_start(card, 0), sizeof(struct jr3_t)); + devpriv->iobase = ioremap(pci_resource_start(card, 0), + offsetof(struct jr3_t, channel[devpriv->n_channels])); + if (!devpriv->iobase) + return -ENOMEM; + result = alloc_subdevices(dev, devpriv->n_channels); if (result < 0) goto out; -- GitLab From aad445f8ccd554cd3013af7bd0a6cfae599a2505 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 20 Nov 2009 20:12:33 +0100 Subject: [PATCH 573/618] Staging: rtl8192su: fix test for negative error in rtl8192_rx_isr() The error tested for is negative Signed-off-by: Roel Kluin Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192su/r8192U_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c index 66274d7666ff..b492ff588b8c 100644 --- a/drivers/staging/rtl8192su/r8192U_core.c +++ b/drivers/staging/rtl8192su/r8192U_core.c @@ -1501,7 +1501,7 @@ static void rtl8192_rx_isr(struct urb *urb) urb->context = skb; skb_queue_tail(&priv->rx_queue, skb); err = usb_submit_urb(urb, GFP_ATOMIC); - if(err && err != EPERM) + if(err && err != -EPERM) printk("can not submit rxurb, err is %x,URB status is %x\n",err,urb->status); } -- GitLab From df574b8ecfb3a84af96229f336a6be88ca4a7055 Mon Sep 17 00:00:00 2001 From: George Kadianakis Date: Thu, 17 Dec 2009 01:16:00 +0200 Subject: [PATCH 574/618] Staging: fix rtl8187se compilation errors with mac80211 This patch fixes compilation problems that were caused by function naming conflicts between the rtl8187se driver and the mac80211 stack. Signed-off-by: George Kadianakis Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/ieee80211/ieee80211.h | 10 +++++----- drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c | 2 +- .../rtl8187se/ieee80211/ieee80211_softmac.c | 14 +++++++------- drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c | 2 +- drivers/staging/rtl8187se/r8180_core.c | 10 +++++----- drivers/staging/rtl8187se/r8180_wx.c | 2 +- 6 files changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h index 3222c22152fb..0d490c164db6 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h @@ -1318,13 +1318,13 @@ extern int ieee80211_encrypt_fragment( struct sk_buff *frag, int hdr_len); -extern int ieee80211_xmit(struct sk_buff *skb, +extern int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); /* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, @@ -1376,8 +1376,8 @@ extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee); extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); @@ -1385,7 +1385,7 @@ extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct extern void notify_wx_assoc_event(struct ieee80211_device *ieee); extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success); extern void SendDisassociation(struct ieee80211_device *ieee,u8* asSta,u8 asRsn); -extern void ieee80211_start_scan(struct ieee80211_device *ieee); +extern void ieee80211_rtl_start_scan(struct ieee80211_device *ieee); //Add for RF power on power off by lizhaoming 080512 extern void SendDisassociation(struct ieee80211_device *ieee, diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c index f882dd8cf9b5..9128c181bc7d 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c @@ -469,7 +469,7 @@ static int is_duplicate_packet(struct ieee80211_device *ieee, /* All received frames are sent to this function. @skb contains the frame in * IEEE 802.11 format, i.e., in the format it was sent over air. * This function is called only as a tasklet (software IRQ). */ -int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats) { struct net_device *dev = ieee->dev; diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c index 1fe19c39d702..c7c645af0ebb 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c @@ -689,7 +689,7 @@ void ieee80211_stop_scan(struct ieee80211_device *ieee) } /* called with ieee->lock held */ -void ieee80211_start_scan(struct ieee80211_device *ieee) +void ieee80211_rtl_start_scan(struct ieee80211_device *ieee) { if(IS_DOT11D_ENABLE(ieee) ) { @@ -1196,7 +1196,7 @@ void ieee80211_associate_step1(struct ieee80211_device *ieee) } } -void ieee80211_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) +void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) { u8 *c; struct sk_buff *skb; @@ -1898,7 +1898,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, ieee80211_associate_step2(ieee); }else{ - ieee80211_auth_challenge(ieee, challenge, chlen); + ieee80211_rtl_auth_challenge(ieee, challenge, chlen); } }else{ ieee->softmac_stats.rx_auth_rs_err++; @@ -2047,7 +2047,7 @@ void ieee80211_reset_queue(struct ieee80211_device *ieee) } -void ieee80211_wake_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee) { unsigned long flags; @@ -2089,7 +2089,7 @@ exit : } -void ieee80211_stop_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee) { //unsigned long flags; //spin_lock_irqsave(&ieee->lock,flags); @@ -2301,7 +2301,7 @@ void ieee80211_start_bss(struct ieee80211_device *ieee) //#else if (ieee->state == IEEE80211_NOLINK){ ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } //#endif spin_unlock_irqrestore(&ieee->lock, flags); @@ -2357,7 +2357,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work) if(ieee->state == IEEE80211_NOLINK){ ieee->beinretry = false; ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } //YJ,add,080828, notify os here if(ieee->state == IEEE80211_NOLINK) diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c index dde1f2e0cf32..69bd02164b0c 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c @@ -304,7 +304,7 @@ ieee80211_classify(struct sk_buff *skb, struct ieee80211_network *network) } /* SKBs are added to the ieee->tx_queue. */ -int ieee80211_xmit(struct sk_buff *skb, +int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_device *ieee = netdev_priv(dev); diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index 57c62b0a402f..e0f13efdb15a 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -1811,7 +1811,7 @@ void rtl8180_rx(struct net_device *dev) if(priv->rx_skb->len > 4) skb_trim(priv->rx_skb,priv->rx_skb->len-4); #ifndef RX_DONT_PASS_UL - if(!ieee80211_rx(priv->ieee80211, + if(!ieee80211_rtl_rx(priv->ieee80211, priv->rx_skb, &stats)){ #endif // RX_DONT_PASS_UL @@ -1917,11 +1917,11 @@ rate) if (!check_nic_enought_desc(dev, priority)){ DMESGW("Error: no descriptor left by previous TX (avail %d) ", get_curr_tx_free_desc(dev, priority)); - ieee80211_stop_queue(priv->ieee80211); + ieee80211_rtl_stop_queue(priv->ieee80211); } rtl8180_tx(dev, skb->data, skb->len, priority, morefrag,0,rate); if (!check_nic_enought_desc(dev, priority)) - ieee80211_stop_queue(priv->ieee80211); + ieee80211_rtl_stop_queue(priv->ieee80211); spin_unlock_irqrestore(&priv->tx_lock,flags); } @@ -3680,7 +3680,7 @@ static const struct net_device_ops rtl8180_netdev_ops = { .ndo_set_mac_address = r8180_set_mac_adr, .ndo_validate_addr = eth_validate_addr, .ndo_change_mtu = eth_change_mtu, - .ndo_start_xmit = ieee80211_xmit, + .ndo_start_xmit = ieee80211_rtl_xmit, }; static int __devinit rtl8180_pci_probe(struct pci_dev *pdev, @@ -3900,7 +3900,7 @@ void rtl8180_try_wake_queue(struct net_device *dev, int pri) spin_unlock_irqrestore(&priv->tx_lock,flags); if(enough_desc) - ieee80211_wake_queue(priv->ieee80211); + ieee80211_rtl_wake_queue(priv->ieee80211); } void rtl8180_tx_isr(struct net_device *dev, int pri,short error) diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c index 536cb6e8e796..124cde356cbc 100644 --- a/drivers/staging/rtl8187se/r8180_wx.c +++ b/drivers/staging/rtl8187se/r8180_wx.c @@ -377,7 +377,7 @@ static int r8180_wx_set_scan(struct net_device *dev, struct iw_request_info *a, // queue_work(priv->ieee80211->wq, &priv->ieee80211->wx_sync_scan_wq); //printk("start scan============================>\n"); ieee80211_softmac_ips_scan_syncro(priv->ieee80211); -//ieee80211_start_scan(priv->ieee80211); +//ieee80211_rtl_start_scan(priv->ieee80211); /* intentionally forget to up sem */ // up(&priv->ieee80211->wx_sem); ret = 0; -- GitLab From fb5fe2776d1e2a0645d8aa3286a1d5ddd95b0723 Mon Sep 17 00:00:00 2001 From: George Kadianakis Date: Thu, 17 Dec 2009 01:18:08 +0200 Subject: [PATCH 575/618] staging: fix rtl8192e compilation errors with mac80211 This patch series fixes compilation problems that were caused by function naming conflicts between the rtl8192e driver and the mac80211 stack. Signed-off-by: George Kadianakis Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192e/ieee80211.h | 12 +++++----- .../staging/rtl8192e/ieee80211/ieee80211.h | 12 +++++----- .../rtl8192e/ieee80211/ieee80211_module.c | 10 ++++---- .../staging/rtl8192e/ieee80211/ieee80211_rx.c | 2 +- .../rtl8192e/ieee80211/ieee80211_softmac.c | 24 +++++++++---------- .../staging/rtl8192e/ieee80211/ieee80211_tx.c | 2 +- drivers/staging/rtl8192e/r8192E_core.c | 14 +++++------ 7 files changed, 38 insertions(+), 38 deletions(-) diff --git a/drivers/staging/rtl8192e/ieee80211.h b/drivers/staging/rtl8192e/ieee80211.h index 97137ddefff4..3ba9e9e90bda 100644 --- a/drivers/staging/rtl8192e/ieee80211.h +++ b/drivers/staging/rtl8192e/ieee80211.h @@ -303,8 +303,8 @@ enum _ReasonCode{ #define ieee80211_rx_mgt ieee80211_rx_mgt_rsl #define ieee80211_get_beacon ieee80211_get_beacon_rsl -#define ieee80211_wake_queue ieee80211_wake_queue_rsl -#define ieee80211_stop_queue ieee80211_stop_queue_rsl +#define ieee80211_rtl_wake_queue ieee80211_rtl_wake_queue_rsl +#define ieee80211_rtl_stop_queue ieee80211_rtl_stop_queue_rsl #define ieee80211_reset_queue ieee80211_reset_queue_rsl #define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rsl #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl @@ -2435,13 +2435,13 @@ extern int ieee80211_encrypt_fragment( struct sk_buff *frag, int hdr_len); -extern int ieee80211_xmit(struct sk_buff *skb, +extern int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); /* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, @@ -2502,8 +2502,8 @@ extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee); extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211.h b/drivers/staging/rtl8192e/ieee80211/ieee80211.h index 83c8452de378..aa76390487bb 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211.h @@ -333,8 +333,8 @@ enum _ReasonCode{ #define ieee80211_rx_mgt ieee80211_rx_mgt_rsl #define ieee80211_get_beacon ieee80211_get_beacon_rsl -#define ieee80211_wake_queue ieee80211_wake_queue_rsl -#define ieee80211_stop_queue ieee80211_stop_queue_rsl +#define ieee80211_rtl_wake_queue ieee80211_rtl_wake_queue_rsl +#define ieee80211_rtl_stop_queue ieee80211_rtl_stop_queue_rsl #define ieee80211_reset_queue ieee80211_reset_queue_rsl #define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rsl #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl @@ -2546,13 +2546,13 @@ extern int ieee80211_encrypt_fragment( struct sk_buff *frag, int hdr_len); -extern int ieee80211_xmit(struct sk_buff *skb, +extern int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); /* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, @@ -2613,8 +2613,8 @@ extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee); extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c index 2644155737a8..f43a7db5c78b 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c @@ -119,7 +119,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv) ieee = (struct ieee80211_device *)dev->priv; #endif #if 0 - dev->hard_start_xmit = ieee80211_xmit; + dev->hard_start_xmit = ieee80211_rtl_xmit; #endif memset(ieee, 0, sizeof(struct ieee80211_device)+sizeof_priv); @@ -333,7 +333,7 @@ extern void ieee80211_crypto_ccmp_exit(void); extern int ieee80211_crypto_wep_init(void); extern void ieee80211_crypto_wep_exit(void); -int __init ieee80211_init(void) +int __init ieee80211_rtl_init(void) { struct proc_dir_entry *e; int retval; @@ -389,7 +389,7 @@ int __init ieee80211_init(void) return 0; } -void __exit ieee80211_exit(void) +void __exit ieee80211_rtl_exit(void) { if (ieee80211_proc) { remove_proc_entry("debug_level", ieee80211_proc); @@ -412,8 +412,8 @@ module_param(debug, int, 0444); MODULE_PARM_DESC(debug, "debug output mask"); -//module_exit(ieee80211_exit); -//module_init(ieee80211_init); +//module_exit(ieee80211_rtl_exit); +//module_init(ieee80211_rtl_init); #endif #endif diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c index 5dc478b86375..06d91715143c 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c @@ -923,7 +923,7 @@ u8 parse_subframe(struct sk_buff *skb, /* All received frames are sent to this function. @skb contains the frame in * IEEE 802.11 format, i.e., in the format it was sent over air. * This function is called only as a tasklet (software IRQ). */ -int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats) { struct net_device *dev = ieee->dev; diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c index 593d22825184..6d1ddec39f0e 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c @@ -684,7 +684,7 @@ void ieee80211_stop_scan(struct ieee80211_device *ieee) } /* called with ieee->lock held */ -void ieee80211_start_scan(struct ieee80211_device *ieee) +void ieee80211_rtl_start_scan(struct ieee80211_device *ieee) { #ifdef ENABLE_DOT11D if(IS_DOT11D_ENABLE(ieee) ) @@ -1430,7 +1430,7 @@ void ieee80211_associate_step1(struct ieee80211_device *ieee) } } -void ieee80211_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) +void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) { u8 *c; struct sk_buff *skb; @@ -2262,7 +2262,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, ieee80211_associate_step2(ieee); }else{ - ieee80211_auth_challenge(ieee, challenge, chlen); + ieee80211_rtl_auth_challenge(ieee, challenge, chlen); } }else{ ieee->softmac_stats.rx_auth_rs_err++; @@ -2376,7 +2376,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device * * to check it any more. * */ //printk("error:no descriptor left@queue_index %d\n", queue_index); - //ieee80211_stop_queue(ieee); + //ieee80211_rtl_stop_queue(ieee); #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE skb_queue_tail(&ieee->skb_drv_aggQ[queue_index], txb->fragments[i]); #else @@ -2440,7 +2440,7 @@ void ieee80211_reset_queue(struct ieee80211_device *ieee) } -void ieee80211_wake_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee) { unsigned long flags; @@ -2481,7 +2481,7 @@ exit : } -void ieee80211_stop_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee) { //unsigned long flags; //spin_lock_irqsave(&ieee->lock,flags); @@ -2706,7 +2706,7 @@ void ieee80211_start_bss(struct ieee80211_device *ieee) if (ieee->state == IEEE80211_NOLINK){ ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } spin_unlock_irqrestore(&ieee->lock, flags); } @@ -2775,7 +2775,7 @@ void ieee80211_associate_retry_wq(struct ieee80211_device *ieee) { ieee->is_roaming= false; ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } spin_unlock_irqrestore(&ieee->lock, flags); @@ -3497,8 +3497,8 @@ void notify_wx_assoc_event(struct ieee80211_device *ieee) #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) //EXPORT_SYMBOL(ieee80211_get_beacon); -//EXPORT_SYMBOL(ieee80211_wake_queue); -//EXPORT_SYMBOL(ieee80211_stop_queue); +//EXPORT_SYMBOL(ieee80211_rtl_wake_queue); +//EXPORT_SYMBOL(ieee80211_rtl_stop_queue); //EXPORT_SYMBOL(ieee80211_reset_queue); //EXPORT_SYMBOL(ieee80211_softmac_stop_protocol); //EXPORT_SYMBOL(ieee80211_softmac_start_protocol); @@ -3518,8 +3518,8 @@ void notify_wx_assoc_event(struct ieee80211_device *ieee) //EXPORT_SYMBOL(ieee80211_start_scan_syncro); #else EXPORT_SYMBOL_NOVERS(ieee80211_get_beacon); -EXPORT_SYMBOL_NOVERS(ieee80211_wake_queue); -EXPORT_SYMBOL_NOVERS(ieee80211_stop_queue); +EXPORT_SYMBOL_NOVERS(ieee80211_rtl_wake_queue); +EXPORT_SYMBOL_NOVERS(ieee80211_rtl_stop_queue); EXPORT_SYMBOL_NOVERS(ieee80211_reset_queue); EXPORT_SYMBOL_NOVERS(ieee80211_softmac_stop_protocol); EXPORT_SYMBOL_NOVERS(ieee80211_softmac_start_protocol); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c index 103b33c093f5..798fb4154c25 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c @@ -604,7 +604,7 @@ void ieee80211_query_seqnum(struct ieee80211_device*ieee, struct sk_buff* skb, u } } -int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) +int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev) { #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)) struct ieee80211_device *ieee = netdev_priv(dev); diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c index ff8fe7e32a92..0ca5d8b4f746 100644 --- a/drivers/staging/rtl8192e/r8192E_core.c +++ b/drivers/staging/rtl8192e/r8192E_core.c @@ -5795,7 +5795,7 @@ static void rtl8192_rx(struct net_device *dev) stats.fragoffset = 0; stats.ntotalfrag = 1; - if(!ieee80211_rx(priv->ieee80211, skb, &stats)){ + if(!ieee80211_rtl_rx(priv->ieee80211, skb, &stats)){ dev_kfree_skb_any(skb); } else { priv->stats.rxok++; @@ -5837,7 +5837,7 @@ static const struct net_device_ops rtl8192_netdev_ops = { .ndo_do_ioctl = rtl8192_ioctl, .ndo_set_multicast_list = r8192_set_multicast, .ndo_set_mac_address = r8192_set_mac_adr, - .ndo_start_xmit = ieee80211_xmit, + .ndo_start_xmit = ieee80211_rtl_xmit, }; /**************************************************************************** @@ -6121,14 +6121,14 @@ static void __devexit rtl8192_pci_disconnect(struct pci_dev *pdev) RT_TRACE(COMP_DOWN, "wlan driver removed\n"); } -extern int ieee80211_init(void); -extern void ieee80211_exit(void); +extern int ieee80211_rtl_init(void); +extern void ieee80211_rtl_exit(void); static int __init rtl8192_pci_module_init(void) { int retval; - retval = ieee80211_init(); + retval = ieee80211_rtl_init(); if (retval) return retval; @@ -6153,7 +6153,7 @@ static void __exit rtl8192_pci_module_exit(void) RT_TRACE(COMP_DOWN, "Exiting"); rtl8192_proc_module_remove(); - ieee80211_exit(); + ieee80211_rtl_exit(); } //warning message WB @@ -6313,7 +6313,7 @@ void rtl8192_try_wake_queue(struct net_device *dev, int pri) spin_unlock_irqrestore(&priv->tx_lock,flags); if(enough_desc) - ieee80211_wake_queue(priv->ieee80211); + ieee80211_rtl_wake_queue(priv->ieee80211); #endif } -- GitLab From 55c7d5fc185e592c317e7cb175f91ee6b9d6c637 Mon Sep 17 00:00:00 2001 From: George Kadianakis Date: Thu, 17 Dec 2009 01:19:13 +0200 Subject: [PATCH 576/618] staging: fix rtl8192su compilation errors with mac80211 This patch series fixes compilation problems that were caused by function naming conflicts between the rtl8192su driver and the mac80211 stack. Signed-off-by: George Kadianakis Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192su/ieee80211/ieee80211.h | 8 ++++---- .../staging/rtl8192su/ieee80211/ieee80211_rx.c | 6 +++--- .../rtl8192su/ieee80211/ieee80211_softmac.c | 16 ++++++++-------- .../staging/rtl8192su/ieee80211/ieee80211_tx.c | 2 +- drivers/staging/rtl8192su/r8192U_core.c | 6 +++--- 5 files changed, 19 insertions(+), 19 deletions(-) diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211.h b/drivers/staging/rtl8192su/ieee80211/ieee80211.h index f22d024b1c39..9a4c858b0666 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211.h @@ -1721,13 +1721,13 @@ extern int ieee80211_encrypt_fragment( struct sk_buff *frag, int hdr_len); -extern int rtl8192_ieee80211_xmit(struct sk_buff *skb, +extern int rtl8192_ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); /* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, @@ -1783,8 +1783,8 @@ extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee); extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c index ac223cef1d33..fecfa120ff48 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c @@ -208,7 +208,7 @@ static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee, * * Responsible for handling management control frames * - * Called by ieee80211_rx */ + * Called by ieee80211_rtl_rx */ static inline int ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats, u16 type, @@ -289,7 +289,7 @@ static int ieee80211_is_eapol_frame(struct ieee80211_device *ieee, return 0; } -/* Called only as a tasklet (software IRQ), by ieee80211_rx */ +/* Called only as a tasklet (software IRQ), by ieee80211_rtl_rx */ static inline int ieee80211_rx_frame_decrypt(struct ieee80211_device* ieee, struct sk_buff *skb, struct ieee80211_crypt_data *crypt) @@ -858,7 +858,7 @@ u8 parse_subframe(struct sk_buff *skb, /* All received frames are sent to this function. @skb contains the frame in * IEEE 802.11 format, i.e., in the format it was sent over air. * This function is called only as a tasklet (software IRQ). */ -int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats) { struct net_device *dev = ieee->dev; diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c index 203c0a5cc8c1..95d4f84dcf3f 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c @@ -610,7 +610,7 @@ void ieee80211_stop_scan(struct ieee80211_device *ieee) } /* called with ieee->lock held */ -void ieee80211_start_scan(struct ieee80211_device *ieee) +void ieee80211_rtl_start_scan(struct ieee80211_device *ieee) { if(IS_DOT11D_ENABLE(ieee) ) { @@ -1281,7 +1281,7 @@ void ieee80211_associate_step1(struct ieee80211_device *ieee) } } -void ieee80211_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) +void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) { u8 *c; struct sk_buff *skb; @@ -2054,7 +2054,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, ieee80211_associate_step2(ieee); }else{ - ieee80211_auth_challenge(ieee, challenge, chlen); + ieee80211_rtl_auth_challenge(ieee, challenge, chlen); } }else{ ieee->softmac_stats.rx_auth_rs_err++; @@ -2162,7 +2162,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device * * to check it any more. * */ //printk("error:no descriptor left@queue_index %d, %d, %d\n", queue_index, skb_queue_len(&ieee->skb_waitQ[queue_index]), ieee->check_nic_enough_desc(ieee->dev,queue_index)); - //ieee80211_stop_queue(ieee); + //ieee80211_rtl_stop_queue(ieee); skb_queue_tail(&ieee->skb_waitQ[queue_index], txb->fragments[i]); }else{ ieee->softmac_data_hard_start_xmit( @@ -2222,7 +2222,7 @@ void ieee80211_reset_queue(struct ieee80211_device *ieee) } -void ieee80211_wake_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee) { unsigned long flags; @@ -2263,7 +2263,7 @@ exit : } -void ieee80211_stop_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee) { //unsigned long flags; //spin_lock_irqsave(&ieee->lock,flags); @@ -2479,7 +2479,7 @@ void ieee80211_start_bss(struct ieee80211_device *ieee) if (ieee->state == IEEE80211_NOLINK){ ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } spin_unlock_irqrestore(&ieee->lock, flags); } @@ -2552,7 +2552,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work) if(ieee->state == IEEE80211_NOLINK) { ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } spin_unlock_irqrestore(&ieee->lock, flags); diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c index 60621d6b2a6b..4d54e1e62d22 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c @@ -604,7 +604,7 @@ void ieee80211_query_seqnum(struct ieee80211_device*ieee, struct sk_buff* skb, u } } -int rtl8192_ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) +int rtl8192_ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_device *ieee = netdev_priv(dev); struct ieee80211_txb *txb = NULL; diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c index b492ff588b8c..b06fca05c501 100644 --- a/drivers/staging/rtl8192su/r8192U_core.c +++ b/drivers/staging/rtl8192su/r8192U_core.c @@ -7155,7 +7155,7 @@ void rtl8192SU_rx_nomal(struct sk_buff* skb) unicast_packet = true; } - if(!ieee80211_rx(priv->ieee80211,skb, &stats)) { + if(!ieee80211_rtl_rx(priv->ieee80211,skb, &stats)) { dev_kfree_skb_any(skb); } else { // priv->stats.rxoktotal++; //YJ,test,090108 @@ -7426,7 +7426,7 @@ static const struct net_device_ops rtl8192_netdev_ops = { .ndo_set_mac_address = r8192_set_mac_adr, .ndo_validate_addr = eth_validate_addr, .ndo_change_mtu = eth_change_mtu, - .ndo_start_xmit = rtl8192_ieee80211_xmit, + .ndo_start_xmit = rtl8192_ieee80211_rtl_xmit, }; static int __devinit rtl8192_usb_probe(struct usb_interface *intf, @@ -7619,7 +7619,7 @@ void rtl8192_try_wake_queue(struct net_device *dev, int pri) spin_unlock_irqrestore(&priv->tx_lock,flags); if(enough_desc) - ieee80211_wake_queue(priv->ieee80211); + ieee80211_rtl_wake_queue(priv->ieee80211); } void EnableHWSecurityConfig8192(struct net_device *dev) -- GitLab From 488d3749620779ab2668c0dba2962836e51e3cd6 Mon Sep 17 00:00:00 2001 From: Stephane Glondu Date: Thu, 17 Dec 2009 15:41:23 +0100 Subject: [PATCH 577/618] staging: rtl8192su: add USB VID/PID for HWNUm-300 The Hercules Wireless N USB mini (HWNUm-300) uses the RTL8191S chipset and seems to work with this driver. Signed-off-by: Stephane Glondu Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192su/r8192U_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c index b06fca05c501..ccb9d5b8cd44 100644 --- a/drivers/staging/rtl8192su/r8192U_core.c +++ b/drivers/staging/rtl8192su/r8192U_core.c @@ -126,6 +126,8 @@ static struct usb_device_id rtl8192_usb_id_tbl[] = { {USB_DEVICE(0x2001, 0x3301)}, /* Zinwell */ {USB_DEVICE(0x5a57, 0x0290)}, + /* Guillemot */ + {USB_DEVICE(0x06f8, 0xe031)}, //92SU {USB_DEVICE(0x0bda, 0x8172)}, {} -- GitLab From 4068fe8b2aa3e12643db0ad5dd4bcf6755a7320f Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 9 Dec 2009 20:25:04 +0100 Subject: [PATCH 578/618] Staging: wlan-ng: fix Correct size given to memset Memset should be given the size of the structure, not the size of the pointer. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ type T; T *x; expression E; @@ memset(x, E, sizeof( + * x)) // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wlan-ng/prism2fw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/wlan-ng/prism2fw.c b/drivers/staging/wlan-ng/prism2fw.c index 7d76a7f92a33..aaa70ed57710 100644 --- a/drivers/staging/wlan-ng/prism2fw.c +++ b/drivers/staging/wlan-ng/prism2fw.c @@ -439,7 +439,7 @@ void free_chunks(imgchunk_t *fchunk, unsigned int *nfchunks) } } *nfchunks = 0; - memset(fchunk, 0, sizeof(fchunk)); + memset(fchunk, 0, sizeof(*fchunk)); } -- GitLab From 3d8affc001a37664b2f5cb29aa12cf8f6c582d52 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 24 Nov 2009 12:13:55 -0800 Subject: [PATCH 579/618] Staging: rtl8192x: fix printk formats Fix printk format warnings in rtl8192[eu]: drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c:979: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c:385: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c:484: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c:614: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c:848: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c:343: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c:442: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c:572: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c | 2 +- drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c | 6 +++--- drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c | 2 +- drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c | 6 +++--- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c index 4e34a1f4c66b..3441b72dd8fa 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c @@ -976,7 +976,7 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len) { if (len != ie[1]+2) { - printk("len:%d, ie:%d\n", len, ie[1]); + printk("len:%zu, ie:%d\n", len, ie[1]); return -EINVAL; } buf = kmalloc(len, GFP_KERNEL); diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c index 98b3bb6b6d69..e41e8a0c739c 100644 --- a/drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c +++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c @@ -382,7 +382,7 @@ int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } @@ -481,7 +481,7 @@ int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } rsp = ( struct ieee80211_hdr_3addr*)skb->data; @@ -611,7 +611,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 6) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); return -1; } diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c index d397f1d68eb7..5f12d62658c9 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c @@ -845,7 +845,7 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len) { if (len != ie[1]+2) { - printk("len:%d, ie:%d\n", len, ie[1]); + printk("len:%zu, ie:%d\n", len, ie[1]); return -EINVAL; } buf = kmalloc(len, GFP_KERNEL); diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c index 26af43bb8390..512a57aebde3 100644 --- a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c +++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c @@ -340,7 +340,7 @@ int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } @@ -439,7 +439,7 @@ int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } rsp = ( struct ieee80211_hdr_3addr*)skb->data; @@ -569,7 +569,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 6) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); return -1; } -- GitLab From 30fb8a7141e906116bb536dd54be99480b8fd238 Mon Sep 17 00:00:00 2001 From: Nitin Gupta Date: Sat, 12 Dec 2009 11:44:46 +0530 Subject: [PATCH 580/618] Staging: ramzswap: remove ARM specific d-cache hack Remove d-cache hack in ramzswap driver that was needed to workaround a bug in ARM version of update_mmu_cache() which caused stale data in d-cache to be transferred to userspace. This bug was fixed by git commit: 787b2faadc4356b6c2c71feb42fb944fece9a12f This also brings down one entry in TODO file. Signed-off-by: Nitin Gupta Acked-by: Pekka Enberg Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ramzswap/TODO | 1 - drivers/staging/ramzswap/ramzswap_drv.c | 28 +++---------------------- 2 files changed, 3 insertions(+), 26 deletions(-) diff --git a/drivers/staging/ramzswap/TODO b/drivers/staging/ramzswap/TODO index bac40d6cb9f1..8d64e28fac0e 100644 --- a/drivers/staging/ramzswap/TODO +++ b/drivers/staging/ramzswap/TODO @@ -1,6 +1,5 @@ TODO: - Add support for swap notifiers - - Remove CONFIG_ARM hack Please send patches to Greg Kroah-Hartman and Nitin Gupta diff --git a/drivers/staging/ramzswap/ramzswap_drv.c b/drivers/staging/ramzswap/ramzswap_drv.c index b839f05efbce..989fac5b01b3 100644 --- a/drivers/staging/ramzswap/ramzswap_drv.c +++ b/drivers/staging/ramzswap/ramzswap_drv.c @@ -222,28 +222,6 @@ static int setup_swap_header(struct ramzswap *rzs, union swap_header *s) return ret; } -static void ramzswap_flush_dcache_page(struct page *page) -{ -#ifdef CONFIG_ARM - int flag = 0; - /* - * Ugly hack to get flush_dcache_page() work on ARM. - * page_mapping(page) == NULL after clearing this swap cache flag. - * Without clearing this flag, flush_dcache_page() will simply set - * "PG_dcache_dirty" bit and return. - */ - if (PageSwapCache(page)) { - flag = 1; - ClearPageSwapCache(page); - } -#endif - flush_dcache_page(page); -#ifdef CONFIG_ARM - if (flag) - SetPageSwapCache(page); -#endif -} - void ramzswap_ioctl_get_stats(struct ramzswap *rzs, struct ramzswap_ioctl_stats *s) { @@ -655,7 +633,7 @@ static int handle_zero_page(struct bio *bio) memset(user_mem, 0, PAGE_SIZE); kunmap_atomic(user_mem, KM_USER0); - ramzswap_flush_dcache_page(page); + flush_dcache_page(page); set_bit(BIO_UPTODATE, &bio->bi_flags); bio_endio(bio, 0); @@ -679,7 +657,7 @@ static int handle_uncompressed_page(struct ramzswap *rzs, struct bio *bio) kunmap_atomic(user_mem, KM_USER0); kunmap_atomic(cmem, KM_USER1); - ramzswap_flush_dcache_page(page); + flush_dcache_page(page); set_bit(BIO_UPTODATE, &bio->bi_flags); bio_endio(bio, 0); @@ -779,7 +757,7 @@ static int ramzswap_read(struct ramzswap *rzs, struct bio *bio) goto out; } - ramzswap_flush_dcache_page(page); + flush_dcache_page(page); set_bit(BIO_UPTODATE, &bio->bi_flags); bio_endio(bio, 0); -- GitLab From a6a6c90804f657a91fb080c7a525a8f90bc38867 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Tue, 15 Dec 2009 06:21:45 +0100 Subject: [PATCH 581/618] Staging: panel: Fix compilation error with custom lcd charset When compiling panel.c with a DEFAULT_LCD_CHARSET it fails to compile with the following error message: drivers/staging/panel/panel.c: In function >>lcd_init<<: drivers/staging/panel/panel.c:1396: error: expected expression before >>;<< token drivers/staging/panel/panel.c:1475: error: expected expression before >>;<< token make[3]: *** [drivers/staging/panel/panel.o] error 1 make[2]: *** [drivers/staging/panel] error 2 make[1]: *** [drivers/staging] error 2 The config used was: CONFIG_PANEL=m CONFIG_PANEL_PARPORT=0 CONFIG_PANEL_PROFILE=0 CONFIG_PANEL_KEYPAD=0 CONFIG_PANEL_LCD=1 CONFIG_PANEL_LCD_HEIGHT=2 CONFIG_PANEL_LCD_WIDTH=20 CONFIG_PANEL_LCD_BWIDTH=40 CONFIG_PANEL_LCD_HWIDTH=64 CONFIG_PANEL_LCD_CHARSET=0 CONFIG_PANEL_LCD_PROTO=0 CONFIG_PANEL_LCD_PIN_E=14 CONFIG_PANEL_LCD_PIN_RS=17 CONFIG_PANEL_LCD_PIN_RW=16 CONFIG_PANEL_LCD_PIN_BL=0 This patch fixes both errors, as it fixes the define Patch against current linux-next tree at Tue Dec 15 06:07:01 2009 +0100 Signed-off-by: Peter Huewe Acked-by: Willy Tarreau Signed-off-by: Greg Kroah-Hartman --- drivers/staging/panel/panel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index f98a52448eae..95c93e82ccec 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -378,7 +378,7 @@ static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES]; #ifdef CONFIG_PANEL_LCD_CHARSET #undef DEFAULT_LCD_CHARSET -#define DEFAULT_LCD_CHARSET +#define DEFAULT_LCD_CHARSET CONFIG_PANEL_LCD_CHARSET #endif #endif /* DEFAULT_PROFILE == 0 */ -- GitLab From ae08961a99853c5b930845b00e3e609ad13dd61a Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Tue, 15 Dec 2009 06:37:36 +0100 Subject: [PATCH 582/618] Staging: panel: Adjust range for PANEL_KEYPAD in Kconfig In panel.c there are only the values 0-3 defined. So 4 is invalid: Signed-off-by: Peter Huewe Cc: Willy Tarreau Signed-off-by: Greg Kroah-Hartman --- drivers/staging/panel/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/panel/Kconfig b/drivers/staging/panel/Kconfig index 3abe7c9d558d..3defa0133f2e 100644 --- a/drivers/staging/panel/Kconfig +++ b/drivers/staging/panel/Kconfig @@ -47,7 +47,7 @@ config PANEL_PROFILE config PANEL_KEYPAD depends on PANEL && PANEL_PROFILE="0" int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)" - range 0 4 + range 0 3 default 0 ---help--- This enables and configures a keypad connected to the parallel port. -- GitLab From ae67491ea085529759ab7475f73e7f3f1e825704 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 12 Dec 2009 23:39:47 +0100 Subject: [PATCH 583/618] Staging: batman-adv: Add Kconfig dependancies on PROC_FS and PACKET. Signed-off-by: Andrew Lunn Signed-off-by: Greg Kroah-Hartman --- drivers/staging/batman-adv/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/batman-adv/Kconfig b/drivers/staging/batman-adv/Kconfig index 7632f5760060..1d74dabf9511 100644 --- a/drivers/staging/batman-adv/Kconfig +++ b/drivers/staging/batman-adv/Kconfig @@ -4,6 +4,7 @@ config BATMAN_ADV tristate "B.A.T.M.A.N. Advanced Meshing Protocol" + depends on PROC_FS && PACKET default n ---help--- -- GitLab From e281cf8966fa723d067343364ba576fb736bfa13 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 13 Dec 2009 14:11:39 +0100 Subject: [PATCH 584/618] Staging: batman-adv: introduce missing kfree Error handling code following a kzalloc should free the allocated data. Similarly for usb-alloc urb. The semantic match that finds the first problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Cc: Andrew Lunn Signed-off-by: Greg Kroah-Hartman --- drivers/staging/batman-adv/send.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/batman-adv/send.c b/drivers/staging/batman-adv/send.c index d724798278d6..eb617508cca4 100644 --- a/drivers/staging/batman-adv/send.c +++ b/drivers/staging/batman-adv/send.c @@ -363,8 +363,10 @@ void add_bcast_packet_to_list(unsigned char *packet_buff, int packet_len) return; forw_packet->packet_buff = kmalloc(packet_len, GFP_ATOMIC); - if (!forw_packet->packet_buff) + if (!forw_packet->packet_buff) { + kfree(forw_packet); return; + } forw_packet->packet_len = packet_len; memcpy(forw_packet->packet_buff, packet_buff, forw_packet->packet_len); -- GitLab From b2cd41496c70a1653f28c6d07b61cbdd25167679 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 14 Dec 2009 08:44:46 -0800 Subject: [PATCH 585/618] Staging/vt66*: kconfig, depends on WLAN The vt665[56] drivers can be built when CONFIG_NET=n & CONFIG_NETDEVICES=n or just when CONFIG_WLAN=n. This leads to build failures. Prevent this by making them depend on WLAN. [This patch was lost in a dualing trees merge; still needs to be re-applied.] Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/Kconfig | 2 +- drivers/staging/vt6656/Kconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/vt6655/Kconfig b/drivers/staging/vt6655/Kconfig index 825bbc4fc3fa..061e730df2d0 100644 --- a/drivers/staging/vt6655/Kconfig +++ b/drivers/staging/vt6655/Kconfig @@ -1,6 +1,6 @@ config VT6655 tristate "VIA Technologies VT6655 support" - depends on PCI + depends on PCI && WLAN select WIRELESS_EXT select WEXT_PRIV ---help--- diff --git a/drivers/staging/vt6656/Kconfig b/drivers/staging/vt6656/Kconfig index 87bcd269310c..1055b526c532 100644 --- a/drivers/staging/vt6656/Kconfig +++ b/drivers/staging/vt6656/Kconfig @@ -1,6 +1,6 @@ config VT6656 tristate "VIA Technologies VT6656 support" - depends on USB + depends on USB && WLAN select WIRELESS_EXT select WEXT_PRIV ---help--- -- GitLab From baf67741bf52b985e318bed3c4acadcda5351e08 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 8 Dec 2009 15:49:48 -0500 Subject: [PATCH 586/618] USB: power management documentation update This patch (as1313) updates the documentation concerning USB power management. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/testing/sysfs-bus-usb | 18 ++++++----- Documentation/usb/power-management.txt | 41 +++++++++---------------- 2 files changed, 25 insertions(+), 34 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index deb6b489e4e5..a07c0f366f91 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -21,25 +21,27 @@ Contact: Alan Stern Description: Each USB device directory will contain a file named power/level. This file holds a power-level setting for - the device, one of "on", "auto", or "suspend". + the device, either "on" or "auto". "on" means that the device is not allowed to autosuspend, although normal suspends for system sleep will still be honored. "auto" means the device will autosuspend and autoresume in the usual manner, according to the - capabilities of its driver. "suspend" means the device - is forced into a suspended state and it will not autoresume - in response to I/O requests. However remote-wakeup requests - from the device may still be enabled (the remote-wakeup - setting is controlled separately by the power/wakeup - attribute). + capabilities of its driver. During normal use, devices should be left in the "auto" - level. The other levels are meant for administrative uses. + level. The "on" level is meant for administrative uses. If you want to suspend a device immediately but leave it free to wake up in response to I/O requests, you should write "0" to power/autosuspend. + Device not capable of proper suspend and resume should be + left in the "on" level. Although the USB spec requires + devices to support suspend/resume, many of them do not. + In fact so many don't that by default, the USB core + initializes all non-hub devices in the "on" level. Some + drivers may change this setting when they are bound. + What: /sys/bus/usb/devices/.../power/persist Date: May 2007 KernelVersion: 2.6.23 diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index c7c1dc2f8017..3bf6818c8cf5 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -71,12 +71,10 @@ being accessed through sysfs, then it definitely is idle. Forms of dynamic PM ------------------- -Dynamic suspends can occur in two ways: manual and automatic. -"Manual" means that the user has told the kernel to suspend a device, -whereas "automatic" means that the kernel has decided all by itself to -suspend a device. Automatic suspend is called "autosuspend" for -short. In general, a device won't be autosuspended unless it has been -idle for some minimum period of time, the so-called idle-delay time. +Dynamic suspends occur when the kernel decides to suspend an idle +device. This is called "autosuspend" for short. In general, a device +won't be autosuspended unless it has been idle for some minimum period +of time, the so-called idle-delay time. Of course, nothing the kernel does on its own initiative should prevent the computer or its devices from working properly. If a @@ -96,10 +94,11 @@ idle. We can categorize power management events in two broad classes: external and internal. External events are those triggered by some agent outside the USB stack: system suspend/resume (triggered by -userspace), manual dynamic suspend/resume (also triggered by -userspace), and remote wakeup (triggered by the device). Internal -events are those triggered within the USB stack: autosuspend and -autoresume. +userspace), manual dynamic resume (also triggered by userspace), and +remote wakeup (triggered by the device). Internal events are those +triggered within the USB stack: autosuspend and autoresume. Note that +all dynamic suspend events are internal; external agents are not +allowed to issue dynamic suspends. The user interface for dynamic PM @@ -145,9 +144,9 @@ relevant attribute files are: wakeup, level, and autosuspend. number of seconds the device should remain idle before the kernel will autosuspend it (the idle-delay time). The default is 2. 0 means to autosuspend as soon as - the device becomes idle, and -1 means never to - autosuspend. You can write a number to the file to - change the autosuspend idle-delay time. + the device becomes idle, and negative values mean + never to autosuspend. You can write a number to the + file to change the autosuspend idle-delay time. Writing "-1" to power/autosuspend and writing "on" to power/level do essentially the same thing -- they both prevent the device from being @@ -377,9 +376,9 @@ the device hasn't been idle for long enough, a delayed workqueue routine is automatically set up to carry out the operation when the autosuspend idle-delay has expired. -Autoresume attempts also can fail. This will happen if power/level is -set to "suspend" or if the device doesn't manage to resume properly. -Unlike autosuspend, there's no delay for an autoresume. +Autoresume attempts also can fail, although failure would mean that +the device is no longer present or operating properly. Unlike +autosuspend, there's no delay for an autoresume. Other parts of the driver interface @@ -527,13 +526,3 @@ succeed, it may still remain active and thus cause the system to resume as soon as the system suspend is complete. Or the remote wakeup may fail and get lost. Which outcome occurs depends on timing and on the hardware and firmware design. - -More interestingly, a device might undergo a manual resume or -autoresume during system suspend. With current kernels this shouldn't -happen, because manual resumes must be initiated by userspace and -autoresumes happen in response to I/O requests, but all user processes -and I/O should be quiescent during a system suspend -- thanks to the -freezer. However there are plans to do away with the freezer, which -would mean these things would become possible. If and when this comes -about, the USB core will carefully arrange matters so that either type -of resume will block until the entire system has resumed. -- GitLab From 8d8558d10806b7e805cb80df867ebb0a453d4765 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 8 Dec 2009 15:50:41 -0500 Subject: [PATCH 587/618] USB: rename usb_configure_device This patch (as1314) renames usb_configure_device() and usb_configure_device_otg() in the hub driver. Neither name is appropriate because these routines enumerate devices, they don't configure them. That's handled by usb_choose_configuration() and usb_set_configuration(). Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 06af970e1064..28738fa17afb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1658,12 +1658,12 @@ static inline void announce_device(struct usb_device *udev) { } #endif /** - * usb_configure_device_otg - FIXME (usbcore-internal) + * usb_enumerate_device_otg - FIXME (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * Do configuration for On-The-Go devices + * Finish enumeration for On-The-Go devices */ -static int usb_configure_device_otg(struct usb_device *udev) +static int usb_enumerate_device_otg(struct usb_device *udev) { int err = 0; @@ -1734,7 +1734,7 @@ static int usb_configure_device_otg(struct usb_device *udev) /** - * usb_configure_device - Detect and probe device intfs/otg (usbcore-internal) + * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * * This is only called by usb_new_device() and usb_authorize_device() @@ -1745,7 +1745,7 @@ static int usb_configure_device_otg(struct usb_device *udev) * the string descriptors, as they will be errored out by the device * until it has been authorized. */ -static int usb_configure_device(struct usb_device *udev) +static int usb_enumerate_device(struct usb_device *udev) { int err; @@ -1769,7 +1769,7 @@ static int usb_configure_device(struct usb_device *udev) udev->descriptor.iManufacturer); udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber); } - err = usb_configure_device_otg(udev); + err = usb_enumerate_device_otg(udev); fail: return err; } @@ -1779,8 +1779,8 @@ static int usb_configure_device(struct usb_device *udev) * usb_new_device - perform initial device setup (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * This is called with devices which have been enumerated, but not yet - * configured. The device descriptor is available, but not descriptors + * This is called with devices which have been detected but not fully + * enumerated. The device descriptor is available, but not descriptors * for any device configuration. The caller must have locked either * the parent hub (if udev is a normal device) or else the * usb_bus_list_lock (if udev is a root hub). The parent's pointer to @@ -1803,8 +1803,8 @@ int usb_new_device(struct usb_device *udev) if (udev->parent) usb_autoresume_device(udev->parent); - usb_detect_quirks(udev); /* Determine quirks */ - err = usb_configure_device(udev); /* detect & probe dev/intfs */ + usb_detect_quirks(udev); + err = usb_enumerate_device(udev); /* Read descriptors */ if (err < 0) goto fail; dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n", @@ -1895,9 +1895,9 @@ int usb_authorize_device(struct usb_device *usb_dev) goto error_device_descriptor; } usb_dev->authorized = 1; - result = usb_configure_device(usb_dev); + result = usb_enumerate_device(usb_dev); if (result < 0) - goto error_configure; + goto error_enumerate; /* Choose and set the configuration. This registers the interfaces * with the driver core and lets interface drivers bind to them. */ @@ -1912,7 +1912,7 @@ int usb_authorize_device(struct usb_device *usb_dev) } } dev_info(&usb_dev->dev, "authorized to connect\n"); -error_configure: +error_enumerate: error_device_descriptor: error_autoresume: out_authorized: -- GitLab From da307123c621b01cce147a4be313d8a754674f63 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 8 Dec 2009 15:54:44 -0500 Subject: [PATCH 588/618] USB: fix bugs in usb_(de)authorize_device This patch (as1315) fixes some bugs in the USB core authorization code: usb_deauthorize_device() should deallocate the device strings instead of leaking them, and it should invoke usb_destroy_configuration() (which does proper reference counting) instead of freeing the config information directly. usb_authorize_device() shouldn't change the device strings until it knows that the authorization will succeed, and it should autosuspend the device at the end (having autoresumed the device at the start). Because the device strings can be changed, the sysfs routines to display the strings must protect the string pointers by locking the device. Signed-off-by: Alan Stern CC: Inaky Perez-Gonzalez Acked-by: David Vrabel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 32 ++++++++++++++++++++------------ drivers/usb/core/sysfs.c | 6 +++++- 2 files changed, 25 insertions(+), 13 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 28738fa17afb..0cec6caf6e9b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1849,21 +1849,23 @@ int usb_new_device(struct usb_device *udev) */ int usb_deauthorize_device(struct usb_device *usb_dev) { - unsigned cnt; usb_lock_device(usb_dev); if (usb_dev->authorized == 0) goto out_unauthorized; + usb_dev->authorized = 0; usb_set_configuration(usb_dev, -1); + + kfree(usb_dev->product); usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL); + kfree(usb_dev->manufacturer); usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL); + kfree(usb_dev->serial); usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL); - kfree(usb_dev->config); - usb_dev->config = NULL; - for (cnt = 0; cnt < usb_dev->descriptor.bNumConfigurations; cnt++) - kfree(usb_dev->rawdescriptors[cnt]); + + usb_destroy_configuration(usb_dev); usb_dev->descriptor.bNumConfigurations = 0; - kfree(usb_dev->rawdescriptors); + out_unauthorized: usb_unlock_device(usb_dev); return 0; @@ -1873,15 +1875,11 @@ int usb_deauthorize_device(struct usb_device *usb_dev) int usb_authorize_device(struct usb_device *usb_dev) { int result = 0, c; + usb_lock_device(usb_dev); if (usb_dev->authorized == 1) goto out_authorized; - kfree(usb_dev->product); - usb_dev->product = NULL; - kfree(usb_dev->manufacturer); - usb_dev->manufacturer = NULL; - kfree(usb_dev->serial); - usb_dev->serial = NULL; + result = usb_autoresume_device(usb_dev); if (result < 0) { dev_err(&usb_dev->dev, @@ -1894,6 +1892,14 @@ int usb_authorize_device(struct usb_device *usb_dev) "authorization: %d\n", result); goto error_device_descriptor; } + + kfree(usb_dev->product); + usb_dev->product = NULL; + kfree(usb_dev->manufacturer); + usb_dev->manufacturer = NULL; + kfree(usb_dev->serial); + usb_dev->serial = NULL; + usb_dev->authorized = 1; result = usb_enumerate_device(usb_dev); if (result < 0) @@ -1912,8 +1918,10 @@ int usb_authorize_device(struct usb_device *usb_dev) } } dev_info(&usb_dev->dev, "authorized to connect\n"); + error_enumerate: error_device_descriptor: + usb_autosuspend_device(usb_dev); error_autoresume: out_authorized: usb_unlock_device(usb_dev); // complements locktree diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 15477008b631..485edf937f25 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -82,9 +82,13 @@ static ssize_t show_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ struct usb_device *udev; \ + int retval; \ \ udev = to_usb_device(dev); \ - return sprintf(buf, "%s\n", udev->name); \ + usb_lock_device(udev); \ + retval = sprintf(buf, "%s\n", udev->name); \ + usb_unlock_device(udev); \ + return retval; \ } \ static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); -- GitLab From ff3b968ceeb73c037cf4759d21923943970f9a7a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 9 Dec 2009 14:23:32 +0100 Subject: [PATCH 589/618] USB: gadget: Use ERR_PTR/IS_ERR Use ERR_PTR and IS_ERR rather than mixing integers and pointers. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression *E; @@ * E < 0 // Signed-off-by: Julia Lawall Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_audio.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index c43c89ffa2c8..0f2eee12ee9f 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -252,12 +252,12 @@ static struct f_audio_buf *f_audio_buffer_alloc(int buf_size) copy_buf = kzalloc(sizeof *copy_buf, GFP_ATOMIC); if (!copy_buf) - return (struct f_audio_buf *)-ENOMEM; + return ERR_PTR(-ENOMEM); copy_buf->buf = kzalloc(buf_size, GFP_ATOMIC); if (!copy_buf->buf) { kfree(copy_buf); - return (struct f_audio_buf *)-ENOMEM; + return ERR_PTR(-ENOMEM); } return copy_buf; @@ -332,7 +332,7 @@ static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req) list_add_tail(©_buf->list, &audio->play_queue); schedule_work(&audio->playback_work); copy_buf = f_audio_buffer_alloc(audio_buf_size); - if (copy_buf < 0) + if (IS_ERR(copy_buf)) return -ENOMEM; } @@ -576,6 +576,8 @@ static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt) usb_ep_enable(out_ep, audio->out_desc); out_ep->driver_data = audio; audio->copy_buf = f_audio_buffer_alloc(audio_buf_size); + if (IS_ERR(audio->copy_buf)) + return -ENOMEM; /* * allocate a bunch of read buffers -- GitLab From 179192d38e8906f00479ec944c15b685400232b0 Mon Sep 17 00:00:00 2001 From: Bill Gatliff Date: Fri, 18 Dec 2009 09:57:22 -0600 Subject: [PATCH 590/618] USB: Fix double-linking of drivers/usb/otg when ULPI is selected This patch corrects a problem where drivers/usb/otg is linked twice if CONFIG_USB_ULPI is selected, resulting in a build error (symbol conflict). The files in that directory are properly linked already as part of CONFIG_USB, and need not be indicated specifically for CONFIG_USB_ULPI. Signed-off-by: Bill Gatliff Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 473aa1a20de9..be3c9b80bc9f 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -44,5 +44,3 @@ obj-y += early/ obj-$(CONFIG_USB_ATM) += atm/ obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ - -obj-$(CONFIG_USB_ULPI) += otg/ -- GitLab From 27f1281d5f72e4f161e215ccad3d7d86b9e624a9 Mon Sep 17 00:00:00 2001 From: Blaise Gassend Date: Fri, 18 Dec 2009 15:23:38 -0800 Subject: [PATCH 591/618] USB: serial: Extra device/vendor ID for mos7840 driver Signed-off-by: Blaise Gassend Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 485fa9c5b107..2cfe2451ed97 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -127,8 +127,9 @@ #define BANDB_DEVICE_ID_US9ML2_4 0xAC30 #define BANDB_DEVICE_ID_USPTL4_2 0xAC31 #define BANDB_DEVICE_ID_USPTL4_4 0xAC32 -#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 -#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 +#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 +#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 +#define BANDB_DEVICE_ID_USOPTL2_4 0xAC24 /* This driver also supports * ATEN UC2324 device using Moschip MCS7840 @@ -191,6 +192,7 @@ static struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, {} /* terminating entry */ @@ -207,6 +209,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, {} /* terminating entry */ -- GitLab From ac06c06770bb8761b1f1f9bdf2f5420fa6d3e9fa Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 21 Dec 2009 15:36:44 -0800 Subject: [PATCH 592/618] USB: emi62: fix crash when trying to load EMI 6|2 firmware While converting emi62 to use request_firmware(), the driver was also changed to use the ihex helper functions. However, this broke the loading of the FPGA firmware because the code tries to access the addr field of the EOF record which works with a plain array that has an empty last record but not with the ihex helper functions where the end of the data is signaled with a NULL record pointer, resulting in: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] emi62_load_firmware+0x33c/0x740 [emi62] This can be fixed by changing the loop condition to test the return value of ihex_next_binrec() directly (like in emi26.c). Signed-off-by: Clemens Ladisch Reported-and-tested-by: Der Mickster Acked-by: David Woodhouse Cc: stable Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/emi62.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 602ee05ba9ff..59860b328534 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -167,7 +167,7 @@ static int emi62_load_firmware (struct usb_device *dev) err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } - } while (i > 0); + } while (rec); /* Assert reset (stop the CPU in the EMI) */ err = emi62_set_reset(dev,1); -- GitLab From 40b52371be92cf9990de162e4c7b4fd9160150a7 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 20 Nov 2009 13:50:53 +0000 Subject: [PATCH 593/618] USB: fix section mismatch in early ehci dbgp Commit 917778267fbe67703ab7d5c6f0b7a05d4c3df485 removed __init from ehci_wait_for_port(), but left it in place on ehci_reset_port(), which is being called from the former function. Signed-off-by: Jan Beulich Acked-by: Jason Wessel Signed-off-by: Greg Kroah-Hartman --- drivers/usb/early/ehci-dbgp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 1206a26ef893..2958a1271b20 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -613,7 +613,7 @@ int dbgp_external_startup(void) } EXPORT_SYMBOL_GPL(dbgp_external_startup); -static int __init ehci_reset_port(int port) +static int ehci_reset_port(int port) { u32 portsc; u32 delay_time, delay; -- GitLab From 4b372072b554723b508e53249dd1b594ad93fbc2 Mon Sep 17 00:00:00 2001 From: pancho horrillo Date: Wed, 2 Dec 2009 20:19:42 +0100 Subject: [PATCH 594/618] USB: add device ID for Apple Cinema Display 23in 2007 Hi! $ lsusb -v Bus 001 Device 008: ID 05ac:921c Apple, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x05ac Apple, Inc. idProduct 0x921c bcdDevice 1.15 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 92 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 16 Signed-off-by: pancho horrillo Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/appledisplay.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 1d8e39a557d9..8dc4afa38b87 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -60,6 +60,7 @@ static struct usb_device_id appledisplay_table [] = { { APPLEDISPLAY_DEVICE(0x9218) }, { APPLEDISPLAY_DEVICE(0x9219) }, + { APPLEDISPLAY_DEVICE(0x921c) }, { APPLEDISPLAY_DEVICE(0x921d) }, /* Terminating entry */ -- GitLab From 70445ae6c669865e464307a155e881096e4a0ae7 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 13 Dec 2009 10:17:16 -0800 Subject: [PATCH 595/618] USB core: fix recent kernel-doc warnings Fix new kernel-doc warnings in usb core: Warning(drivers/usb/core/usb.c:79): No description found for parameter 'config' Warning(drivers/usb/core/usb.c:79): No description found for parameter 'iface_num' Warning(drivers/usb/core/usb.c:79): No description found for parameter 'alt_num' Warning(drivers/usb/core/hcd.c:1622): No description found for parameter 'udev' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 4 +++- drivers/usb/core/usb.c | 6 +++--- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 6dac3b802d41..0495fa651225 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1597,7 +1597,9 @@ void usb_hcd_flush_endpoint(struct usb_device *udev, } /** - * Check whether a new bandwidth setting exceeds the bus bandwidth. + * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds + * the bus bandwidth + * @udev: target &usb_device * @new_config: new configuration to install * @cur_alt: the current alternate interface setting * @new_alt: alternate interface setting that is being installed diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 2fb42043b305..0daff0d968ba 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -66,9 +66,9 @@ MODULE_PARM_DESC(autosuspend, "default autosuspend delay"); /** * usb_find_alt_setting() - Given a configuration, find the alternate setting * for the given interface. - * @config - the configuration to search (not necessarily the current config). - * @iface_num - interface number to search in - * @alt_num - alternate interface setting number to search for. + * @config: the configuration to search (not necessarily the current config). + * @iface_num: interface number to search in + * @alt_num: alternate interface setting number to search for. * * Search the configuration's interface cache for the given alt setting. */ -- GitLab From 31844d55800e1b93fe75c4d6188a4a44db2e1bbe Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Wed, 16 Dec 2009 21:45:10 +0100 Subject: [PATCH 596/618] USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header This is a strictly move-only patch to relocate all FTDI device product ID definitions to their own ftdi_sio_ids.h header (following the usual *_ids.h kernel tree convention, too), thus correcting the slightly too messy appearance (crucial driver defines were stuck somewhere in the decaying middle swamp of the huge existing header). Compile-tested, based on latest mainline git. Signed-off-by: Andreas Mohr Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 959 +----------------------------- drivers/usb/serial/ftdi_sio_ids.h | 959 ++++++++++++++++++++++++++++++ 3 files changed, 964 insertions(+), 955 deletions(-) create mode 100644 drivers/usb/serial/ftdi_sio_ids.h diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f99498fca99a..216f187582ab 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -44,6 +44,7 @@ #include #include #include "ftdi_sio.h" +#include "ftdi_sio_ids.h" /* * Version Information diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 4586a24fafb0..b0e0d64f822e 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -1,7 +1,10 @@ /* - * Definitions for the FTDI USB Single Port Serial Converter - + * Driver definitions for the FTDI USB Single Port Serial Converter - * known as FTDI_SIO (Serial Input/Output application of the chipset) * + * For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h + * + * * The example I have is known as the USC-1000 which is available from * http://www.dse.co.nz - cat no XH4214 It looks similar to this: * http://www.dansdata.com/usbser.htm but I can't be sure There are other @@ -17,880 +20,7 @@ * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the * FTDI_SIO implementation. * - * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais - * from Rudolf Gugler - * - */ - -#define FTDI_VID 0x0403 /* Vendor Id */ -#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ -#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ -#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ -#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ -#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ -#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ -#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ -#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ -#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ -#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ - -/* Larsen and Brusgaard AltiTrack/USBtrack */ -#define LARSENBRUSGAARD_VID 0x0FD8 -#define LB_ALTITRACK_PID 0x0001 - -/* www.canusb.com Lawicel CANUSB device */ -#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ - -/* AlphaMicro Components AMC-232USB01 device */ -#define FTDI_AMC232_PID 0xFF00 /* Product Id */ - -/* www.candapter.com Ewert Energy Systems CANdapter device */ -#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ - -/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ -/* the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ -#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ -#define FTDI_SCS_DEVICE_2_PID 0xD012 -#define FTDI_SCS_DEVICE_3_PID 0xD013 -#define FTDI_SCS_DEVICE_4_PID 0xD014 -#define FTDI_SCS_DEVICE_5_PID 0xD015 -#define FTDI_SCS_DEVICE_6_PID 0xD016 -#define FTDI_SCS_DEVICE_7_PID 0xD017 - -/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ -#define FTDI_ACTZWAVE_PID 0xF2D0 - - -/* www.starting-point-systems.com µChameleon device */ -#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ - -/* www.irtrans.de device */ -#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ - - -/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ -#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ - -/* iPlus device */ -#define FTDI_IPLUS_PID 0xD070 /* Product Id */ -#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ - -/* DMX4ALL DMX Interfaces */ -#define FTDI_DMX4ALL 0xC850 - -/* OpenDCC (www.opendcc.de) product id */ -#define FTDI_OPENDCC_PID 0xBFD8 -#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 -#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA -#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB - -/* Sprog II (Andrew Crosland's SprogII DCC interface) */ -#define FTDI_SPROG_II 0xF0C8 - -/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ -/* they use the ftdi chipset for the USB interface and the vendor id is the same */ -#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ -#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ -#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ -#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ -#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ -#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ -#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ -#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ - -/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ -/* broadband internet service. The following PID is exhibited by the usb device supplied */ -/* (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ - -/* - * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device - * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) - * (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_PCDJ_DAC2_PID 0xFA88 - -/* - * The following are the values for the Matrix Orbital LCD displays, - * which are the FT232BM ( similar to the 8U232AM ) - */ -#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ - -/* OOCDlink by Joern Kaipf - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ -#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ - -/* - * The following are the values for the Matrix Orbital FTDI Range - * Anything in this range will use an FT232RL. - */ -#define MTXORB_VID 0x1B3D -#define MTXORB_FTDI_RANGE_0100_PID 0x0100 -#define MTXORB_FTDI_RANGE_0101_PID 0x0101 -#define MTXORB_FTDI_RANGE_0102_PID 0x0102 -#define MTXORB_FTDI_RANGE_0103_PID 0x0103 -#define MTXORB_FTDI_RANGE_0104_PID 0x0104 -#define MTXORB_FTDI_RANGE_0105_PID 0x0105 -#define MTXORB_FTDI_RANGE_0106_PID 0x0106 -#define MTXORB_FTDI_RANGE_0107_PID 0x0107 -#define MTXORB_FTDI_RANGE_0108_PID 0x0108 -#define MTXORB_FTDI_RANGE_0109_PID 0x0109 -#define MTXORB_FTDI_RANGE_010A_PID 0x010A -#define MTXORB_FTDI_RANGE_010B_PID 0x010B -#define MTXORB_FTDI_RANGE_010C_PID 0x010C -#define MTXORB_FTDI_RANGE_010D_PID 0x010D -#define MTXORB_FTDI_RANGE_010E_PID 0x010E -#define MTXORB_FTDI_RANGE_010F_PID 0x010F -#define MTXORB_FTDI_RANGE_0110_PID 0x0110 -#define MTXORB_FTDI_RANGE_0111_PID 0x0111 -#define MTXORB_FTDI_RANGE_0112_PID 0x0112 -#define MTXORB_FTDI_RANGE_0113_PID 0x0113 -#define MTXORB_FTDI_RANGE_0114_PID 0x0114 -#define MTXORB_FTDI_RANGE_0115_PID 0x0115 -#define MTXORB_FTDI_RANGE_0116_PID 0x0116 -#define MTXORB_FTDI_RANGE_0117_PID 0x0117 -#define MTXORB_FTDI_RANGE_0118_PID 0x0118 -#define MTXORB_FTDI_RANGE_0119_PID 0x0119 -#define MTXORB_FTDI_RANGE_011A_PID 0x011A -#define MTXORB_FTDI_RANGE_011B_PID 0x011B -#define MTXORB_FTDI_RANGE_011C_PID 0x011C -#define MTXORB_FTDI_RANGE_011D_PID 0x011D -#define MTXORB_FTDI_RANGE_011E_PID 0x011E -#define MTXORB_FTDI_RANGE_011F_PID 0x011F -#define MTXORB_FTDI_RANGE_0120_PID 0x0120 -#define MTXORB_FTDI_RANGE_0121_PID 0x0121 -#define MTXORB_FTDI_RANGE_0122_PID 0x0122 -#define MTXORB_FTDI_RANGE_0123_PID 0x0123 -#define MTXORB_FTDI_RANGE_0124_PID 0x0124 -#define MTXORB_FTDI_RANGE_0125_PID 0x0125 -#define MTXORB_FTDI_RANGE_0126_PID 0x0126 -#define MTXORB_FTDI_RANGE_0127_PID 0x0127 -#define MTXORB_FTDI_RANGE_0128_PID 0x0128 -#define MTXORB_FTDI_RANGE_0129_PID 0x0129 -#define MTXORB_FTDI_RANGE_012A_PID 0x012A -#define MTXORB_FTDI_RANGE_012B_PID 0x012B -#define MTXORB_FTDI_RANGE_012C_PID 0x012C -#define MTXORB_FTDI_RANGE_012D_PID 0x012D -#define MTXORB_FTDI_RANGE_012E_PID 0x012E -#define MTXORB_FTDI_RANGE_012F_PID 0x012F -#define MTXORB_FTDI_RANGE_0130_PID 0x0130 -#define MTXORB_FTDI_RANGE_0131_PID 0x0131 -#define MTXORB_FTDI_RANGE_0132_PID 0x0132 -#define MTXORB_FTDI_RANGE_0133_PID 0x0133 -#define MTXORB_FTDI_RANGE_0134_PID 0x0134 -#define MTXORB_FTDI_RANGE_0135_PID 0x0135 -#define MTXORB_FTDI_RANGE_0136_PID 0x0136 -#define MTXORB_FTDI_RANGE_0137_PID 0x0137 -#define MTXORB_FTDI_RANGE_0138_PID 0x0138 -#define MTXORB_FTDI_RANGE_0139_PID 0x0139 -#define MTXORB_FTDI_RANGE_013A_PID 0x013A -#define MTXORB_FTDI_RANGE_013B_PID 0x013B -#define MTXORB_FTDI_RANGE_013C_PID 0x013C -#define MTXORB_FTDI_RANGE_013D_PID 0x013D -#define MTXORB_FTDI_RANGE_013E_PID 0x013E -#define MTXORB_FTDI_RANGE_013F_PID 0x013F -#define MTXORB_FTDI_RANGE_0140_PID 0x0140 -#define MTXORB_FTDI_RANGE_0141_PID 0x0141 -#define MTXORB_FTDI_RANGE_0142_PID 0x0142 -#define MTXORB_FTDI_RANGE_0143_PID 0x0143 -#define MTXORB_FTDI_RANGE_0144_PID 0x0144 -#define MTXORB_FTDI_RANGE_0145_PID 0x0145 -#define MTXORB_FTDI_RANGE_0146_PID 0x0146 -#define MTXORB_FTDI_RANGE_0147_PID 0x0147 -#define MTXORB_FTDI_RANGE_0148_PID 0x0148 -#define MTXORB_FTDI_RANGE_0149_PID 0x0149 -#define MTXORB_FTDI_RANGE_014A_PID 0x014A -#define MTXORB_FTDI_RANGE_014B_PID 0x014B -#define MTXORB_FTDI_RANGE_014C_PID 0x014C -#define MTXORB_FTDI_RANGE_014D_PID 0x014D -#define MTXORB_FTDI_RANGE_014E_PID 0x014E -#define MTXORB_FTDI_RANGE_014F_PID 0x014F -#define MTXORB_FTDI_RANGE_0150_PID 0x0150 -#define MTXORB_FTDI_RANGE_0151_PID 0x0151 -#define MTXORB_FTDI_RANGE_0152_PID 0x0152 -#define MTXORB_FTDI_RANGE_0153_PID 0x0153 -#define MTXORB_FTDI_RANGE_0154_PID 0x0154 -#define MTXORB_FTDI_RANGE_0155_PID 0x0155 -#define MTXORB_FTDI_RANGE_0156_PID 0x0156 -#define MTXORB_FTDI_RANGE_0157_PID 0x0157 -#define MTXORB_FTDI_RANGE_0158_PID 0x0158 -#define MTXORB_FTDI_RANGE_0159_PID 0x0159 -#define MTXORB_FTDI_RANGE_015A_PID 0x015A -#define MTXORB_FTDI_RANGE_015B_PID 0x015B -#define MTXORB_FTDI_RANGE_015C_PID 0x015C -#define MTXORB_FTDI_RANGE_015D_PID 0x015D -#define MTXORB_FTDI_RANGE_015E_PID 0x015E -#define MTXORB_FTDI_RANGE_015F_PID 0x015F -#define MTXORB_FTDI_RANGE_0160_PID 0x0160 -#define MTXORB_FTDI_RANGE_0161_PID 0x0161 -#define MTXORB_FTDI_RANGE_0162_PID 0x0162 -#define MTXORB_FTDI_RANGE_0163_PID 0x0163 -#define MTXORB_FTDI_RANGE_0164_PID 0x0164 -#define MTXORB_FTDI_RANGE_0165_PID 0x0165 -#define MTXORB_FTDI_RANGE_0166_PID 0x0166 -#define MTXORB_FTDI_RANGE_0167_PID 0x0167 -#define MTXORB_FTDI_RANGE_0168_PID 0x0168 -#define MTXORB_FTDI_RANGE_0169_PID 0x0169 -#define MTXORB_FTDI_RANGE_016A_PID 0x016A -#define MTXORB_FTDI_RANGE_016B_PID 0x016B -#define MTXORB_FTDI_RANGE_016C_PID 0x016C -#define MTXORB_FTDI_RANGE_016D_PID 0x016D -#define MTXORB_FTDI_RANGE_016E_PID 0x016E -#define MTXORB_FTDI_RANGE_016F_PID 0x016F -#define MTXORB_FTDI_RANGE_0170_PID 0x0170 -#define MTXORB_FTDI_RANGE_0171_PID 0x0171 -#define MTXORB_FTDI_RANGE_0172_PID 0x0172 -#define MTXORB_FTDI_RANGE_0173_PID 0x0173 -#define MTXORB_FTDI_RANGE_0174_PID 0x0174 -#define MTXORB_FTDI_RANGE_0175_PID 0x0175 -#define MTXORB_FTDI_RANGE_0176_PID 0x0176 -#define MTXORB_FTDI_RANGE_0177_PID 0x0177 -#define MTXORB_FTDI_RANGE_0178_PID 0x0178 -#define MTXORB_FTDI_RANGE_0179_PID 0x0179 -#define MTXORB_FTDI_RANGE_017A_PID 0x017A -#define MTXORB_FTDI_RANGE_017B_PID 0x017B -#define MTXORB_FTDI_RANGE_017C_PID 0x017C -#define MTXORB_FTDI_RANGE_017D_PID 0x017D -#define MTXORB_FTDI_RANGE_017E_PID 0x017E -#define MTXORB_FTDI_RANGE_017F_PID 0x017F -#define MTXORB_FTDI_RANGE_0180_PID 0x0180 -#define MTXORB_FTDI_RANGE_0181_PID 0x0181 -#define MTXORB_FTDI_RANGE_0182_PID 0x0182 -#define MTXORB_FTDI_RANGE_0183_PID 0x0183 -#define MTXORB_FTDI_RANGE_0184_PID 0x0184 -#define MTXORB_FTDI_RANGE_0185_PID 0x0185 -#define MTXORB_FTDI_RANGE_0186_PID 0x0186 -#define MTXORB_FTDI_RANGE_0187_PID 0x0187 -#define MTXORB_FTDI_RANGE_0188_PID 0x0188 -#define MTXORB_FTDI_RANGE_0189_PID 0x0189 -#define MTXORB_FTDI_RANGE_018A_PID 0x018A -#define MTXORB_FTDI_RANGE_018B_PID 0x018B -#define MTXORB_FTDI_RANGE_018C_PID 0x018C -#define MTXORB_FTDI_RANGE_018D_PID 0x018D -#define MTXORB_FTDI_RANGE_018E_PID 0x018E -#define MTXORB_FTDI_RANGE_018F_PID 0x018F -#define MTXORB_FTDI_RANGE_0190_PID 0x0190 -#define MTXORB_FTDI_RANGE_0191_PID 0x0191 -#define MTXORB_FTDI_RANGE_0192_PID 0x0192 -#define MTXORB_FTDI_RANGE_0193_PID 0x0193 -#define MTXORB_FTDI_RANGE_0194_PID 0x0194 -#define MTXORB_FTDI_RANGE_0195_PID 0x0195 -#define MTXORB_FTDI_RANGE_0196_PID 0x0196 -#define MTXORB_FTDI_RANGE_0197_PID 0x0197 -#define MTXORB_FTDI_RANGE_0198_PID 0x0198 -#define MTXORB_FTDI_RANGE_0199_PID 0x0199 -#define MTXORB_FTDI_RANGE_019A_PID 0x019A -#define MTXORB_FTDI_RANGE_019B_PID 0x019B -#define MTXORB_FTDI_RANGE_019C_PID 0x019C -#define MTXORB_FTDI_RANGE_019D_PID 0x019D -#define MTXORB_FTDI_RANGE_019E_PID 0x019E -#define MTXORB_FTDI_RANGE_019F_PID 0x019F -#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 -#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 -#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 -#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 -#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 -#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 -#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 -#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 -#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 -#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 -#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA -#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB -#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC -#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD -#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE -#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF -#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 -#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 -#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 -#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 -#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 -#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 -#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 -#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 -#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 -#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 -#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA -#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB -#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC -#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD -#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE -#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF -#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 -#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 -#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 -#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 -#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 -#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 -#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 -#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 -#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 -#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 -#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA -#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB -#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC -#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD -#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE -#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF -#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 -#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 -#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 -#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 -#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 -#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 -#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 -#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 -#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 -#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 -#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA -#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB -#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC -#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD -#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE -#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF -#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 -#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 -#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 -#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 -#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 -#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 -#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 -#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 -#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 -#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 -#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA -#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB -#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC -#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED -#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE -#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF -#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 -#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 -#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 -#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 -#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 -#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 -#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 -#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 -#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 -#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 -#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA -#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB -#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC -#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD -#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE -#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF - - - -/* Interbiometrics USB I/O Board */ -/* Developed for Interbiometrics by Rudolf Gugler */ -#define INTERBIOMETRICS_VID 0x1209 -#define INTERBIOMETRICS_IOBOARD_PID 0x1002 -#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 - -/* - * The following are the values for the Perle Systems - * UltraPort USB serial converters - */ -#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ - -/* - * The following are the values for the Sealevel SeaLINK+ adapters. - * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and - * removed some PIDs that don't seem to match any existing products.) - */ -#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ -#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ -#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ -#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ -#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ -#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ -#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ -#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ -#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ -#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ -#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ -#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ -#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ -#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ -#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ -#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ -#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ -#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ -#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ -#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ -#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ -#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ -#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ -#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ -#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ -#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ -#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ -#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ -#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ -#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ -#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ -#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ -#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ -#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ -#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ -#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ -#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ -#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ -#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ -#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ -#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ -#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ -#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ -#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ -#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ -#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ -#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ -#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ - -/* - * The following are the values for two KOBIL chipcard terminals. - */ -#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ -#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ -#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ - -/* - * Icom ID-1 digital transceiver - */ - -#define ICOM_ID1_VID 0x0C26 -#define ICOM_ID1_PID 0x0004 - -/* - * ASK.fr devices - */ -#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ - -/* - * FTDI USB UART chips used in construction projects from the - * Elektor Electronics magazine (http://elektor-electronics.co.uk) - */ -#define ELEKTOR_VID 0x0C7D -#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ - -/* - * DSS-20 Sync Station for Sony Ericsson P800 - */ -#define FTDI_DSS20_PID 0xFC82 - -/* - * Home Electronics (www.home-electro.com) USB gadgets - */ -#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ - -/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ -#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ - -/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ - -#define FTDI_TNC_X_PID 0xEBE0 - -/* - * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). - * All of these devices use FTDI's vendor ID (0x0403). - * - * The previously included PID for the UO 100 module was incorrect. - * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). - * - * Armin Laeuger originally sent the PID for the UM 100 module. - */ -#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */ -#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ -#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ -#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ -#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ -/* Additional ELV PIDs that default to using the FTDI D2XX drivers on - * MS Windows, rather than the FTDI Virtual Com Port drivers. - * Maybe these will be easier to use with the libftdi/libusb user-space - * drivers, or possibly the Comedi drivers in some cases. */ -#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ -#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ -#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ -#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ -#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ -#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ -#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ -#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ -#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ -#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ -#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ -#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ -#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ -#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ -#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ -#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ -#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ -#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ -#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ -#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ -#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ -#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ -#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ - -/* - * Definitions for ID TECH (www.idt-net.com) devices - */ -#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ -#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ - -/* - * Definitions for Omnidirectional Control Technology, Inc. devices - */ -#define OCT_VID 0x0B39 /* OCT vendor ID */ -/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ -/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ -/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ -#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ - -/* an infrared receiver for user access control with IR tags */ -#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ - -/* - * Definitions for Artemis astronomical USB based cameras - * Check it at http://www.artemisccd.co.uk/ - */ -#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ - -/* - * Definitions for ATIK Instruments astronomical USB based cameras - * Check it at http://www.atik-instruments.com/ - */ -#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ -#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ -#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ -#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ -#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ - -/* - * Protego product ids - */ -#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ -#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ -#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ -#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ - -/* - * Gude Analog- und Digitalsysteme GmbH - */ -#define FTDI_GUDEADS_E808_PID 0xE808 -#define FTDI_GUDEADS_E809_PID 0xE809 -#define FTDI_GUDEADS_E80A_PID 0xE80A -#define FTDI_GUDEADS_E80B_PID 0xE80B -#define FTDI_GUDEADS_E80C_PID 0xE80C -#define FTDI_GUDEADS_E80D_PID 0xE80D -#define FTDI_GUDEADS_E80E_PID 0xE80E -#define FTDI_GUDEADS_E80F_PID 0xE80F -#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ -#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ -#define FTDI_GUDEADS_E88A_PID 0xE88A -#define FTDI_GUDEADS_E88B_PID 0xE88B -#define FTDI_GUDEADS_E88C_PID 0xE88C -#define FTDI_GUDEADS_E88D_PID 0xE88D -#define FTDI_GUDEADS_E88E_PID 0xE88E -#define FTDI_GUDEADS_E88F_PID 0xE88F - -/* - * Linx Technologies product ids - */ -#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ -#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ -#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ -#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ -#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ - -/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ -/* unit for PIC16's/PIC18's */ -#define FTDI_CCSICDU20_0_PID 0xF9D0 -#define FTDI_CCSICDU40_1_PID 0xF9D1 -#define FTDI_CCSMACHX_2_PID 0xF9D2 -#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 -#define FTDI_CCSICDU64_4_PID 0xF9D4 -#define FTDI_CCSPRIME8_5_PID 0xF9D5 - -/* Inside Accesso contactless reader (http://www.insidefr.com) */ -#define INSIDE_ACCESSO 0xFAD0 - -/* - * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI - */ -#define INTREPID_VID 0x093C -#define INTREPID_VALUECAN_PID 0x0601 -#define INTREPID_NEOVI_PID 0x0701 - -/* - * Falcom Wireless Communications GmbH - */ -#define FALCOM_VID 0x0F94 /* Vendor Id */ -#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ -#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ - -/* - * SUUNTO product ids - */ -#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ - -/* - * Oceanic product ids - */ -#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ - -/* - * TTi (Thurlby Thandar Instruments) - */ -#define TTI_VID 0x103E /* Vendor Id */ -#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ - -/* - * Definitions for B&B Electronics products. - */ -#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ -#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ -#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ -#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ -#define BANDB_USOPTL4_PID 0xAC11 -#define BANDB_USPTL4_PID 0xAC12 -#define BANDB_USO9ML2DR_2_PID 0xAC16 -#define BANDB_USO9ML2DR_PID 0xAC17 -#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */ -#define BANDB_USOPTL4DR_PID 0xAC19 -#define BANDB_485USB9F_2W_PID 0xAC25 -#define BANDB_485USB9F_4W_PID 0xAC26 -#define BANDB_232USB9M_PID 0xAC27 -#define BANDB_485USBTB_2W_PID 0xAC33 -#define BANDB_485USBTB_4W_PID 0xAC34 -#define BANDB_TTL5USB9M_PID 0xAC49 -#define BANDB_TTL3USB9M_PID 0xAC50 -#define BANDB_ZZ_PROG1_USB_PID 0xBA02 - -/* - * RM Michaelides CANview USB (http://www.rmcan.com) - * CAN fieldbus interface adapter, added by port GmbH www.port.de) - * Ian Abbott changed the macro names for consistency. - */ -#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ - -/* - * EVER Eco Pro UPS (http://www.ever.com.pl/) - */ - -#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ - -/* - * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, - * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices - * and I'm not entirely sure which are used by which. - */ -#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 -#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 - -/* - * Mobility Electronics products. - */ -#define MOBILITY_VID 0x1342 -#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ - -/* - * microHAM product IDs (http://www.microham.com). - * Submitted by Justin Burket (KL1RL) - * and Mike Studer (K6EEP) . - * Ian Abbott added a few more from the driver INF file. - */ -#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ -#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ -#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ -#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ -#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ -#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ -#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ -#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ - -/* - * Active Robots product ids. - */ -#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ - -/* - * Xsens Technologies BV products (http://www.xsens.com). - */ -#define XSENS_CONVERTER_0_PID 0xD388 -#define XSENS_CONVERTER_1_PID 0xD389 -#define XSENS_CONVERTER_2_PID 0xD38A -#define XSENS_CONVERTER_3_PID 0xD38B -#define XSENS_CONVERTER_4_PID 0xD38C -#define XSENS_CONVERTER_5_PID 0xD38D -#define XSENS_CONVERTER_6_PID 0xD38E -#define XSENS_CONVERTER_7_PID 0xD38F - -/* - * Teratronik product ids. - * Submitted by O. Wölfelschneider. - */ -#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ -#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ - -/* - * Evolution Robotics products (http://www.evolution.com/). - * Submitted by Shawn M. Lavelle. - */ -#define EVOLUTION_VID 0xDEEE /* Vendor ID */ -#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ -#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ -#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ -#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ - -/* Pyramid Computer GmbH */ -#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ - -/* - * NDI (www.ndigital.com) product ids - */ -#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ -#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ -#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ -#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ -#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ - -/* - * Posiflex inc retail equipment (http://www.posiflex.com.tw) - */ -#define POSIFLEX_VID 0x0d3a /* Vendor ID */ -#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ - -/* - * Westrex International devices submitted by Cory Lee - */ -#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ -#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ - -/* - * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) - */ -#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ - -/* - * Eclo (http://www.eclo.pt/) product IDs. - * PID 0xEA90 submitted by Martin Grill. - */ -#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ - -/* - * Papouch products (http://www.papouch.com/) - * Submitted by Folkert van Heusden - */ - -#define PAPOUCH_VID 0x5050 /* Vendor ID */ -#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ -#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ - -/* - * ACG Identification Technologies GmbH products (http://www.acg.de/). - * Submitted by anton -at- goto10 -dot- org. */ -#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ - -/* - * Yost Engineering, Inc. products (www.yostengineering.com). - * PID 0xE050 submitted by Aaron Prose. - */ -#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ - -/* - * ThorLabs USB motor drivers - */ -#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ - -/* - * Testo products (http://www.testo.com/) - * Submitted by Colin Leroy - */ -#define TESTO_VID 0x128D -#define TESTO_USB_INTERFACE_PID 0x0001 - -/* - * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. - */ -#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ - -/* - * Tactrix OpenPort (ECU) devices. - * OpenPort 1.3M submitted by Donour Sizemore. - * OpenPort 1.3S and 1.3U submitted by Ian Abbott. - */ -#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ -#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ -#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ - -/* - * Telldus Technologies - */ -#define TELLDUS_VID 0x1781 /* Vendor ID */ -#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ - -/* - * IBS elektronik product ids - * Submitted by Thomas Schleusener - */ -#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ -#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ -#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ -#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ -#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ -#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ -#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ -#define FTDI_IBS_PROD_PID 0xff3f /* future device */ - -/* - * MaxStream devices www.maxstream.net - */ -#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ - -/* Olimex */ -#define OLIMEX_VID 0x15BA -#define OLIMEX_ARM_USB_OCD_PID 0x0003 - -/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ -/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ -#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 -#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 - -/* www.elsterelectricity.com Elster Unicom III Optical Probe */ -#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ - -/* - * The Mobility Lab (TML) - * Submitted by Pierre Castella - */ -#define TML_VID 0x1B91 /* Vendor ID */ -#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ - -/* Propox devices */ -#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 - -/* Rig Expert Ukraine devices */ -#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ - -/* Domintell products http://www.domintell.com */ -#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ -#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ - -/* Alti-2 products http://www.alti-2.com */ -#define ALTI2_VID 0x1BC9 -#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ @@ -910,86 +40,6 @@ #define INTERFACE_C 3 #define INTERFACE_D 4 -/* - * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 - * Submitted by Harald Welte - */ -#define FIC_VID 0x1457 -#define FIC_NEO1973_DEBUG_PID 0x5118 - -/* - * RATOC REX-USB60F - */ -#define RATOC_VENDOR_ID 0x0584 -#define RATOC_PRODUCT_ID_USB60F 0xb020 - -/* - * DIEBOLD BCS SE923 - */ -#define DIEBOLD_BCS_SE923_PID 0xfb99 - -/* - * Atmel STK541 - */ -#define ATMEL_VID 0x03eb /* Vendor ID */ -#define STK541_PID 0x2109 /* Zigbee Controller */ - -/* - * Dresden Elektronic Sensor Terminal Board - */ -#define DE_VID 0x1cf1 /* Vendor ID */ -#define STB_PID 0x0001 /* Sensor Terminal Board */ -#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ - -/* - * Blackfin gnICE JTAG - * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice - */ -#define ADI_VID 0x0456 -#define ADI_GNICE_PID 0xF000 -#define ADI_GNICEPLUS_PID 0xF001 - -/* - * JETI SPECTROMETER SPECBOS 1201 - * http://www.jeti.com/products/sys/scb/scb1201.php - */ -#define JETI_VID 0x0c6c -#define JETI_SPC1201_PID 0x04b2 - -/* - * Marvell SheevaPlug - */ -#define MARVELL_VID 0x9e88 -#define MARVELL_SHEEVAPLUG_PID 0x9e8f - -#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ - -/* - * GN Otometrics (http://www.otometrics.com) - * Submitted by Ville Sundberg. - */ -#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ -#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ - -/* - * Bayer Ascensia Contour blood glucose meter USB-converter cable. - * http://winglucofacts.com/cables/ - */ -#define BAYER_VID 0x1A79 -#define BAYER_CONTOUR_CABLE_PID 0x6001 - -/* - * Marvell OpenRD Base, Client - * http://www.open-rd.org - * OpenRD Base, Client use VID 0x0403 - */ -#define MARVELL_OPENRD_PID 0x9e90 - -/* - * Hameg HO820 and HO870 interface (using VID 0x0403) - */ -#define HAMEG_HO820_PID 0xed74 -#define HAMEG_HO870_PID 0xed71 /* * BmRequestType: 1100 0000b @@ -1504,4 +554,3 @@ typedef enum { * B2..7 Length of message - (not including Byte 0) * */ - diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h new file mode 100644 index 000000000000..2b5017bd4538 --- /dev/null +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -0,0 +1,959 @@ +/* + * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters. + * + * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais + * from Rudolf Gugler + * + */ + +#define FTDI_VID 0x0403 /* Vendor Id */ +#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ +#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ +#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ +#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ +#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ +#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ +#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ +#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ +#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ +#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ + +/* Larsen and Brusgaard AltiTrack/USBtrack */ +#define LARSENBRUSGAARD_VID 0x0FD8 +#define LB_ALTITRACK_PID 0x0001 + +/* www.canusb.com Lawicel CANUSB device */ +#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ + +/* AlphaMicro Components AMC-232USB01 device */ +#define FTDI_AMC232_PID 0xFF00 /* Product Id */ + +/* www.candapter.com Ewert Energy Systems CANdapter device */ +#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ + +/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ +/* the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ +#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ +#define FTDI_SCS_DEVICE_2_PID 0xD012 +#define FTDI_SCS_DEVICE_3_PID 0xD013 +#define FTDI_SCS_DEVICE_4_PID 0xD014 +#define FTDI_SCS_DEVICE_5_PID 0xD015 +#define FTDI_SCS_DEVICE_6_PID 0xD016 +#define FTDI_SCS_DEVICE_7_PID 0xD017 + +/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ +#define FTDI_ACTZWAVE_PID 0xF2D0 + + +/* www.starting-point-systems.com µChameleon device */ +#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ + +/* www.irtrans.de device */ +#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ + + +/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ +#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ + +/* iPlus device */ +#define FTDI_IPLUS_PID 0xD070 /* Product Id */ +#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ + +/* DMX4ALL DMX Interfaces */ +#define FTDI_DMX4ALL 0xC850 + +/* OpenDCC (www.opendcc.de) product id */ +#define FTDI_OPENDCC_PID 0xBFD8 +#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 +#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA +#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB + +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 + +/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ +/* they use the ftdi chipset for the USB interface and the vendor id is the same */ +#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ +#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ +#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ +#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ +#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ +#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ +#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ +#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ + +/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ +/* broadband internet service. The following PID is exhibited by the usb device supplied */ +/* (the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ + +/* + * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device + * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) + * (the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_PCDJ_DAC2_PID 0xFA88 + +/* + * The following are the values for the Matrix Orbital LCD displays, + * which are the FT232BM ( similar to the 8U232AM ) + */ +#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ + +/* OOCDlink by Joern Kaipf + * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ +#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ + +/* + * The following are the values for the Matrix Orbital FTDI Range + * Anything in this range will use an FT232RL. + */ +#define MTXORB_VID 0x1B3D +#define MTXORB_FTDI_RANGE_0100_PID 0x0100 +#define MTXORB_FTDI_RANGE_0101_PID 0x0101 +#define MTXORB_FTDI_RANGE_0102_PID 0x0102 +#define MTXORB_FTDI_RANGE_0103_PID 0x0103 +#define MTXORB_FTDI_RANGE_0104_PID 0x0104 +#define MTXORB_FTDI_RANGE_0105_PID 0x0105 +#define MTXORB_FTDI_RANGE_0106_PID 0x0106 +#define MTXORB_FTDI_RANGE_0107_PID 0x0107 +#define MTXORB_FTDI_RANGE_0108_PID 0x0108 +#define MTXORB_FTDI_RANGE_0109_PID 0x0109 +#define MTXORB_FTDI_RANGE_010A_PID 0x010A +#define MTXORB_FTDI_RANGE_010B_PID 0x010B +#define MTXORB_FTDI_RANGE_010C_PID 0x010C +#define MTXORB_FTDI_RANGE_010D_PID 0x010D +#define MTXORB_FTDI_RANGE_010E_PID 0x010E +#define MTXORB_FTDI_RANGE_010F_PID 0x010F +#define MTXORB_FTDI_RANGE_0110_PID 0x0110 +#define MTXORB_FTDI_RANGE_0111_PID 0x0111 +#define MTXORB_FTDI_RANGE_0112_PID 0x0112 +#define MTXORB_FTDI_RANGE_0113_PID 0x0113 +#define MTXORB_FTDI_RANGE_0114_PID 0x0114 +#define MTXORB_FTDI_RANGE_0115_PID 0x0115 +#define MTXORB_FTDI_RANGE_0116_PID 0x0116 +#define MTXORB_FTDI_RANGE_0117_PID 0x0117 +#define MTXORB_FTDI_RANGE_0118_PID 0x0118 +#define MTXORB_FTDI_RANGE_0119_PID 0x0119 +#define MTXORB_FTDI_RANGE_011A_PID 0x011A +#define MTXORB_FTDI_RANGE_011B_PID 0x011B +#define MTXORB_FTDI_RANGE_011C_PID 0x011C +#define MTXORB_FTDI_RANGE_011D_PID 0x011D +#define MTXORB_FTDI_RANGE_011E_PID 0x011E +#define MTXORB_FTDI_RANGE_011F_PID 0x011F +#define MTXORB_FTDI_RANGE_0120_PID 0x0120 +#define MTXORB_FTDI_RANGE_0121_PID 0x0121 +#define MTXORB_FTDI_RANGE_0122_PID 0x0122 +#define MTXORB_FTDI_RANGE_0123_PID 0x0123 +#define MTXORB_FTDI_RANGE_0124_PID 0x0124 +#define MTXORB_FTDI_RANGE_0125_PID 0x0125 +#define MTXORB_FTDI_RANGE_0126_PID 0x0126 +#define MTXORB_FTDI_RANGE_0127_PID 0x0127 +#define MTXORB_FTDI_RANGE_0128_PID 0x0128 +#define MTXORB_FTDI_RANGE_0129_PID 0x0129 +#define MTXORB_FTDI_RANGE_012A_PID 0x012A +#define MTXORB_FTDI_RANGE_012B_PID 0x012B +#define MTXORB_FTDI_RANGE_012C_PID 0x012C +#define MTXORB_FTDI_RANGE_012D_PID 0x012D +#define MTXORB_FTDI_RANGE_012E_PID 0x012E +#define MTXORB_FTDI_RANGE_012F_PID 0x012F +#define MTXORB_FTDI_RANGE_0130_PID 0x0130 +#define MTXORB_FTDI_RANGE_0131_PID 0x0131 +#define MTXORB_FTDI_RANGE_0132_PID 0x0132 +#define MTXORB_FTDI_RANGE_0133_PID 0x0133 +#define MTXORB_FTDI_RANGE_0134_PID 0x0134 +#define MTXORB_FTDI_RANGE_0135_PID 0x0135 +#define MTXORB_FTDI_RANGE_0136_PID 0x0136 +#define MTXORB_FTDI_RANGE_0137_PID 0x0137 +#define MTXORB_FTDI_RANGE_0138_PID 0x0138 +#define MTXORB_FTDI_RANGE_0139_PID 0x0139 +#define MTXORB_FTDI_RANGE_013A_PID 0x013A +#define MTXORB_FTDI_RANGE_013B_PID 0x013B +#define MTXORB_FTDI_RANGE_013C_PID 0x013C +#define MTXORB_FTDI_RANGE_013D_PID 0x013D +#define MTXORB_FTDI_RANGE_013E_PID 0x013E +#define MTXORB_FTDI_RANGE_013F_PID 0x013F +#define MTXORB_FTDI_RANGE_0140_PID 0x0140 +#define MTXORB_FTDI_RANGE_0141_PID 0x0141 +#define MTXORB_FTDI_RANGE_0142_PID 0x0142 +#define MTXORB_FTDI_RANGE_0143_PID 0x0143 +#define MTXORB_FTDI_RANGE_0144_PID 0x0144 +#define MTXORB_FTDI_RANGE_0145_PID 0x0145 +#define MTXORB_FTDI_RANGE_0146_PID 0x0146 +#define MTXORB_FTDI_RANGE_0147_PID 0x0147 +#define MTXORB_FTDI_RANGE_0148_PID 0x0148 +#define MTXORB_FTDI_RANGE_0149_PID 0x0149 +#define MTXORB_FTDI_RANGE_014A_PID 0x014A +#define MTXORB_FTDI_RANGE_014B_PID 0x014B +#define MTXORB_FTDI_RANGE_014C_PID 0x014C +#define MTXORB_FTDI_RANGE_014D_PID 0x014D +#define MTXORB_FTDI_RANGE_014E_PID 0x014E +#define MTXORB_FTDI_RANGE_014F_PID 0x014F +#define MTXORB_FTDI_RANGE_0150_PID 0x0150 +#define MTXORB_FTDI_RANGE_0151_PID 0x0151 +#define MTXORB_FTDI_RANGE_0152_PID 0x0152 +#define MTXORB_FTDI_RANGE_0153_PID 0x0153 +#define MTXORB_FTDI_RANGE_0154_PID 0x0154 +#define MTXORB_FTDI_RANGE_0155_PID 0x0155 +#define MTXORB_FTDI_RANGE_0156_PID 0x0156 +#define MTXORB_FTDI_RANGE_0157_PID 0x0157 +#define MTXORB_FTDI_RANGE_0158_PID 0x0158 +#define MTXORB_FTDI_RANGE_0159_PID 0x0159 +#define MTXORB_FTDI_RANGE_015A_PID 0x015A +#define MTXORB_FTDI_RANGE_015B_PID 0x015B +#define MTXORB_FTDI_RANGE_015C_PID 0x015C +#define MTXORB_FTDI_RANGE_015D_PID 0x015D +#define MTXORB_FTDI_RANGE_015E_PID 0x015E +#define MTXORB_FTDI_RANGE_015F_PID 0x015F +#define MTXORB_FTDI_RANGE_0160_PID 0x0160 +#define MTXORB_FTDI_RANGE_0161_PID 0x0161 +#define MTXORB_FTDI_RANGE_0162_PID 0x0162 +#define MTXORB_FTDI_RANGE_0163_PID 0x0163 +#define MTXORB_FTDI_RANGE_0164_PID 0x0164 +#define MTXORB_FTDI_RANGE_0165_PID 0x0165 +#define MTXORB_FTDI_RANGE_0166_PID 0x0166 +#define MTXORB_FTDI_RANGE_0167_PID 0x0167 +#define MTXORB_FTDI_RANGE_0168_PID 0x0168 +#define MTXORB_FTDI_RANGE_0169_PID 0x0169 +#define MTXORB_FTDI_RANGE_016A_PID 0x016A +#define MTXORB_FTDI_RANGE_016B_PID 0x016B +#define MTXORB_FTDI_RANGE_016C_PID 0x016C +#define MTXORB_FTDI_RANGE_016D_PID 0x016D +#define MTXORB_FTDI_RANGE_016E_PID 0x016E +#define MTXORB_FTDI_RANGE_016F_PID 0x016F +#define MTXORB_FTDI_RANGE_0170_PID 0x0170 +#define MTXORB_FTDI_RANGE_0171_PID 0x0171 +#define MTXORB_FTDI_RANGE_0172_PID 0x0172 +#define MTXORB_FTDI_RANGE_0173_PID 0x0173 +#define MTXORB_FTDI_RANGE_0174_PID 0x0174 +#define MTXORB_FTDI_RANGE_0175_PID 0x0175 +#define MTXORB_FTDI_RANGE_0176_PID 0x0176 +#define MTXORB_FTDI_RANGE_0177_PID 0x0177 +#define MTXORB_FTDI_RANGE_0178_PID 0x0178 +#define MTXORB_FTDI_RANGE_0179_PID 0x0179 +#define MTXORB_FTDI_RANGE_017A_PID 0x017A +#define MTXORB_FTDI_RANGE_017B_PID 0x017B +#define MTXORB_FTDI_RANGE_017C_PID 0x017C +#define MTXORB_FTDI_RANGE_017D_PID 0x017D +#define MTXORB_FTDI_RANGE_017E_PID 0x017E +#define MTXORB_FTDI_RANGE_017F_PID 0x017F +#define MTXORB_FTDI_RANGE_0180_PID 0x0180 +#define MTXORB_FTDI_RANGE_0181_PID 0x0181 +#define MTXORB_FTDI_RANGE_0182_PID 0x0182 +#define MTXORB_FTDI_RANGE_0183_PID 0x0183 +#define MTXORB_FTDI_RANGE_0184_PID 0x0184 +#define MTXORB_FTDI_RANGE_0185_PID 0x0185 +#define MTXORB_FTDI_RANGE_0186_PID 0x0186 +#define MTXORB_FTDI_RANGE_0187_PID 0x0187 +#define MTXORB_FTDI_RANGE_0188_PID 0x0188 +#define MTXORB_FTDI_RANGE_0189_PID 0x0189 +#define MTXORB_FTDI_RANGE_018A_PID 0x018A +#define MTXORB_FTDI_RANGE_018B_PID 0x018B +#define MTXORB_FTDI_RANGE_018C_PID 0x018C +#define MTXORB_FTDI_RANGE_018D_PID 0x018D +#define MTXORB_FTDI_RANGE_018E_PID 0x018E +#define MTXORB_FTDI_RANGE_018F_PID 0x018F +#define MTXORB_FTDI_RANGE_0190_PID 0x0190 +#define MTXORB_FTDI_RANGE_0191_PID 0x0191 +#define MTXORB_FTDI_RANGE_0192_PID 0x0192 +#define MTXORB_FTDI_RANGE_0193_PID 0x0193 +#define MTXORB_FTDI_RANGE_0194_PID 0x0194 +#define MTXORB_FTDI_RANGE_0195_PID 0x0195 +#define MTXORB_FTDI_RANGE_0196_PID 0x0196 +#define MTXORB_FTDI_RANGE_0197_PID 0x0197 +#define MTXORB_FTDI_RANGE_0198_PID 0x0198 +#define MTXORB_FTDI_RANGE_0199_PID 0x0199 +#define MTXORB_FTDI_RANGE_019A_PID 0x019A +#define MTXORB_FTDI_RANGE_019B_PID 0x019B +#define MTXORB_FTDI_RANGE_019C_PID 0x019C +#define MTXORB_FTDI_RANGE_019D_PID 0x019D +#define MTXORB_FTDI_RANGE_019E_PID 0x019E +#define MTXORB_FTDI_RANGE_019F_PID 0x019F +#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 +#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 +#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 +#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 +#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 +#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 +#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 +#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 +#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 +#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 +#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA +#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB +#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC +#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD +#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE +#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF +#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 +#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 +#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 +#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 +#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 +#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 +#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 +#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 +#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 +#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 +#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA +#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB +#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC +#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD +#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE +#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF +#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 +#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 +#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 +#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 +#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 +#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 +#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 +#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 +#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 +#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 +#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA +#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB +#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC +#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD +#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE +#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF +#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 +#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 +#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 +#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 +#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 +#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 +#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 +#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 +#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 +#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 +#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA +#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB +#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC +#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD +#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE +#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF +#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 +#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 +#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 +#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 +#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 +#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 +#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 +#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 +#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 +#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 +#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA +#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB +#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC +#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED +#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE +#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF +#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 +#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 +#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 +#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 +#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 +#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 +#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 +#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 +#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 +#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 +#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA +#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB +#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC +#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD +#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE +#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF + + + +/* Interbiometrics USB I/O Board */ +/* Developed for Interbiometrics by Rudolf Gugler */ +#define INTERBIOMETRICS_VID 0x1209 +#define INTERBIOMETRICS_IOBOARD_PID 0x1002 +#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 + +/* + * The following are the values for the Perle Systems + * UltraPort USB serial converters + */ +#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ + +/* + * The following are the values for the Sealevel SeaLINK+ adapters. + * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and + * removed some PIDs that don't seem to match any existing products.) + */ +#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ +#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ +#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ +#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ +#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ +#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ +#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ +#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ +#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ +#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ +#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ +#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ +#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ +#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ +#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ +#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ +#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ +#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ +#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ +#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ +#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ +#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ +#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ +#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ +#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ +#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ +#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ +#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ +#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ +#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ +#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ +#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ +#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ +#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ +#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ +#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ +#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ +#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ +#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ +#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ +#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ +#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ +#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ +#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ +#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ +#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ +#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ +#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ + +/* + * The following are the values for two KOBIL chipcard terminals. + */ +#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ +#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ +#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ + +/* + * Icom ID-1 digital transceiver + */ + +#define ICOM_ID1_VID 0x0C26 +#define ICOM_ID1_PID 0x0004 + +/* + * ASK.fr devices + */ +#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ + +/* + * FTDI USB UART chips used in construction projects from the + * Elektor Electronics magazine (http://elektor-electronics.co.uk) + */ +#define ELEKTOR_VID 0x0C7D +#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ + +/* + * DSS-20 Sync Station for Sony Ericsson P800 + */ +#define FTDI_DSS20_PID 0xFC82 + +/* + * Home Electronics (www.home-electro.com) USB gadgets + */ +#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ + +/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ +/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ +#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ + +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ + +#define FTDI_TNC_X_PID 0xEBE0 + +/* + * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). + * All of these devices use FTDI's vendor ID (0x0403). + * + * The previously included PID for the UO 100 module was incorrect. + * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). + * + * Armin Laeuger originally sent the PID for the UM 100 module. + */ +#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */ +#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ +#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ +#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ +#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ +/* Additional ELV PIDs that default to using the FTDI D2XX drivers on + * MS Windows, rather than the FTDI Virtual Com Port drivers. + * Maybe these will be easier to use with the libftdi/libusb user-space + * drivers, or possibly the Comedi drivers in some cases. */ +#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ +#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ +#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ +#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ +#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ +#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ +#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ +#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ +#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ +#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ +#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ +#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ +#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ +#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ +#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ +#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ +#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ +#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ +#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ +#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ +#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ +#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ +#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ + +/* + * Definitions for ID TECH (www.idt-net.com) devices + */ +#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ +#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ + +/* + * Definitions for Omnidirectional Control Technology, Inc. devices + */ +#define OCT_VID 0x0B39 /* OCT vendor ID */ +/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ +/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ +/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ +#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ + +/* an infrared receiver for user access control with IR tags */ +#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ + +/* + * Definitions for Artemis astronomical USB based cameras + * Check it at http://www.artemisccd.co.uk/ + */ +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ + +/* + * Definitions for ATIK Instruments astronomical USB based cameras + * Check it at http://www.atik-instruments.com/ + */ +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ +#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ +#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ +#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ + +/* + * Protego product ids + */ +#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ +#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ +#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ +#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ + +/* + * Gude Analog- und Digitalsysteme GmbH + */ +#define FTDI_GUDEADS_E808_PID 0xE808 +#define FTDI_GUDEADS_E809_PID 0xE809 +#define FTDI_GUDEADS_E80A_PID 0xE80A +#define FTDI_GUDEADS_E80B_PID 0xE80B +#define FTDI_GUDEADS_E80C_PID 0xE80C +#define FTDI_GUDEADS_E80D_PID 0xE80D +#define FTDI_GUDEADS_E80E_PID 0xE80E +#define FTDI_GUDEADS_E80F_PID 0xE80F +#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ +#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ +#define FTDI_GUDEADS_E88A_PID 0xE88A +#define FTDI_GUDEADS_E88B_PID 0xE88B +#define FTDI_GUDEADS_E88C_PID 0xE88C +#define FTDI_GUDEADS_E88D_PID 0xE88D +#define FTDI_GUDEADS_E88E_PID 0xE88E +#define FTDI_GUDEADS_E88F_PID 0xE88F + +/* + * Linx Technologies product ids + */ +#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ +#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ +#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ +#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ +#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ + +/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ +/* unit for PIC16's/PIC18's */ +#define FTDI_CCSICDU20_0_PID 0xF9D0 +#define FTDI_CCSICDU40_1_PID 0xF9D1 +#define FTDI_CCSMACHX_2_PID 0xF9D2 +#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 +#define FTDI_CCSICDU64_4_PID 0xF9D4 +#define FTDI_CCSPRIME8_5_PID 0xF9D5 + +/* Inside Accesso contactless reader (http://www.insidefr.com) */ +#define INSIDE_ACCESSO 0xFAD0 + +/* + * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI + */ +#define INTREPID_VID 0x093C +#define INTREPID_VALUECAN_PID 0x0601 +#define INTREPID_NEOVI_PID 0x0701 + +/* + * Falcom Wireless Communications GmbH + */ +#define FALCOM_VID 0x0F94 /* Vendor Id */ +#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ +#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ + +/* + * SUUNTO product ids + */ +#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ + +/* + * Oceanic product ids + */ +#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ + +/* + * TTi (Thurlby Thandar Instruments) + */ +#define TTI_VID 0x103E /* Vendor Id */ +#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ + +/* + * Definitions for B&B Electronics products. + */ +#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ +#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ +#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ +#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ +#define BANDB_USOPTL4_PID 0xAC11 +#define BANDB_USPTL4_PID 0xAC12 +#define BANDB_USO9ML2DR_2_PID 0xAC16 +#define BANDB_USO9ML2DR_PID 0xAC17 +#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */ +#define BANDB_USOPTL4DR_PID 0xAC19 +#define BANDB_485USB9F_2W_PID 0xAC25 +#define BANDB_485USB9F_4W_PID 0xAC26 +#define BANDB_232USB9M_PID 0xAC27 +#define BANDB_485USBTB_2W_PID 0xAC33 +#define BANDB_485USBTB_4W_PID 0xAC34 +#define BANDB_TTL5USB9M_PID 0xAC49 +#define BANDB_TTL3USB9M_PID 0xAC50 +#define BANDB_ZZ_PROG1_USB_PID 0xBA02 + +/* + * RM Michaelides CANview USB (http://www.rmcan.com) + * CAN fieldbus interface adapter, added by port GmbH www.port.de) + * Ian Abbott changed the macro names for consistency. + */ +#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ + +/* + * EVER Eco Pro UPS (http://www.ever.com.pl/) + */ + +#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ + +/* + * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, + * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices + * and I'm not entirely sure which are used by which. + */ +#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 +#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 + +/* + * Mobility Electronics products. + */ +#define MOBILITY_VID 0x1342 +#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ + +/* + * microHAM product IDs (http://www.microham.com). + * Submitted by Justin Burket (KL1RL) + * and Mike Studer (K6EEP) . + * Ian Abbott added a few more from the driver INF file. + */ +#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ +#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ +#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ +#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ +#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ +#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ +#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ +#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ + +/* + * Active Robots product ids. + */ +#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ + +/* + * Xsens Technologies BV products (http://www.xsens.com). + */ +#define XSENS_CONVERTER_0_PID 0xD388 +#define XSENS_CONVERTER_1_PID 0xD389 +#define XSENS_CONVERTER_2_PID 0xD38A +#define XSENS_CONVERTER_3_PID 0xD38B +#define XSENS_CONVERTER_4_PID 0xD38C +#define XSENS_CONVERTER_5_PID 0xD38D +#define XSENS_CONVERTER_6_PID 0xD38E +#define XSENS_CONVERTER_7_PID 0xD38F + +/* + * Teratronik product ids. + * Submitted by O. Wölfelschneider. + */ +#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ +#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ + +/* + * Evolution Robotics products (http://www.evolution.com/). + * Submitted by Shawn M. Lavelle. + */ +#define EVOLUTION_VID 0xDEEE /* Vendor ID */ +#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ +#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ +#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ + +/* Pyramid Computer GmbH */ +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ + +/* + * NDI (www.ndigital.com) product ids + */ +#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ +#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ +#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ +#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ +#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ + +/* + * Posiflex inc retail equipment (http://www.posiflex.com.tw) + */ +#define POSIFLEX_VID 0x0d3a /* Vendor ID */ +#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ + +/* + * Westrex International devices submitted by Cory Lee + */ +#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ +#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ + +/* + * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) + */ +#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ + +/* + * Eclo (http://www.eclo.pt/) product IDs. + * PID 0xEA90 submitted by Martin Grill. + */ +#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ + +/* + * Papouch products (http://www.papouch.com/) + * Submitted by Folkert van Heusden + */ + +#define PAPOUCH_VID 0x5050 /* Vendor ID */ +#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ + +/* + * ACG Identification Technologies GmbH products (http://www.acg.de/). + * Submitted by anton -at- goto10 -dot- org. + */ +#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ + +/* + * Yost Engineering, Inc. products (www.yostengineering.com). + * PID 0xE050 submitted by Aaron Prose. + */ +#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ + +/* + * ThorLabs USB motor drivers + */ +#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ + +/* + * Testo products (http://www.testo.com/) + * Submitted by Colin Leroy + */ +#define TESTO_VID 0x128D +#define TESTO_USB_INTERFACE_PID 0x0001 + +/* + * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + */ +#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ + +/* + * Tactrix OpenPort (ECU) devices. + * OpenPort 1.3M submitted by Donour Sizemore. + * OpenPort 1.3S and 1.3U submitted by Ian Abbott. + */ +#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ +#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ +#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ + +/* + * Telldus Technologies + */ +#define TELLDUS_VID 0x1781 /* Vendor ID */ +#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ + +/* + * IBS elektronik product ids + * Submitted by Thomas Schleusener + */ +#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ +#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ +#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ +#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ +#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ +#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ +#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ +#define FTDI_IBS_PROD_PID 0xff3f /* future device */ + +/* + * MaxStream devices www.maxstream.net + */ +#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ + +/* Olimex */ +#define OLIMEX_VID 0x15BA +#define OLIMEX_ARM_USB_OCD_PID 0x0003 + +/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ +/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ +#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 +#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 + +/* www.elsterelectricity.com Elster Unicom III Optical Probe */ +#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ + +/* + * The Mobility Lab (TML) + * Submitted by Pierre Castella + */ +#define TML_VID 0x1B91 /* Vendor ID */ +#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ + +/* Propox devices */ +#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 + +/* Rig Expert Ukraine devices */ +#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ + +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ + +/* Alti-2 products http://www.alti-2.com */ +#define ALTI2_VID 0x1BC9 +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ + +/* + * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 + * Submitted by Harald Welte + */ +#define FIC_VID 0x1457 +#define FIC_NEO1973_DEBUG_PID 0x5118 + +/* + * RATOC REX-USB60F + */ +#define RATOC_VENDOR_ID 0x0584 +#define RATOC_PRODUCT_ID_USB60F 0xb020 + +/* + * DIEBOLD BCS SE923 + */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* + * Atmel STK541 + */ +#define ATMEL_VID 0x03eb /* Vendor ID */ +#define STK541_PID 0x2109 /* Zigbee Controller */ + +/* + * Dresden Elektronic Sensor Terminal Board + */ +#define DE_VID 0x1cf1 /* Vendor ID */ +#define STB_PID 0x0001 /* Sensor Terminal Board */ +#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ + +/* + * Blackfin gnICE JTAG + * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice + */ +#define ADI_VID 0x0456 +#define ADI_GNICE_PID 0xF000 +#define ADI_GNICEPLUS_PID 0xF001 + +/* + * JETI SPECTROMETER SPECBOS 1201 + * http://www.jeti.com/products/sys/scb/scb1201.php + */ +#define JETI_VID 0x0c6c +#define JETI_SPC1201_PID 0x04b2 + +/* + * Marvell SheevaPlug + */ +#define MARVELL_VID 0x9e88 +#define MARVELL_SHEEVAPLUG_PID 0x9e8f + +#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ + +/* + * GN Otometrics (http://www.otometrics.com) + * Submitted by Ville Sundberg. + */ +#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ +#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ + +/* + * Bayer Ascensia Contour blood glucose meter USB-converter cable. + * http://winglucofacts.com/cables/ + */ +#define BAYER_VID 0x1A79 +#define BAYER_CONTOUR_CABLE_PID 0x6001 + +/* + * Marvell OpenRD Base, Client + * http://www.open-rd.org + * OpenRD Base, Client use VID 0x0403 + */ +#define MARVELL_OPENRD_PID 0x9e90 + +/* + * Hameg HO820 and HO870 interface (using VID 0x0403) + */ +#define HAMEG_HO820_PID 0xed74 +#define HAMEG_HO870_PID 0xed71 + -- GitLab From 4e092d110fe931db3878865db185be1c9df3e182 Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Thu, 17 Dec 2009 11:56:09 +0100 Subject: [PATCH 597/618] USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h header This is a (almost) sort-only patch to sort FTDI device product ID definitions in new ftdi_sio_ids.h header. Advantage is that new device ID submissions will now have a specific (sorted) position - less future merge conflicts. Compile-tested, based on _current_ mainline git. Minor checkpatch.pl warnings were eliminated whereever it made sense, very minor text changes. Signed-off-by: Andreas Mohr Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio_ids.h | 1487 +++++++++++++++-------------- 1 file changed, 757 insertions(+), 730 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 2b5017bd4538..da92b4952ffb 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1,36 +1,85 @@ /* * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters. + * Please keep numerically sorted within individual areas, thanks! * * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais * from Rudolf Gugler * */ + +/**********************************/ +/***** devices using FTDI VID *****/ +/**********************************/ + + #define FTDI_VID 0x0403 /* Vendor Id */ -#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ + + +/*** "original" FTDI device PIDs ***/ + #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ -#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ -#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ -#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ -#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ -#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ +#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ +#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ -/* Larsen and Brusgaard AltiTrack/USBtrack */ -#define LARSENBRUSGAARD_VID 0x0FD8 -#define LB_ALTITRACK_PID 0x0001 -/* www.canusb.com Lawicel CANUSB device */ -#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ +/*** third-party PIDs (using FTDI_VID) ***/ -/* AlphaMicro Components AMC-232USB01 device */ -#define FTDI_AMC232_PID 0xFF00 /* Product Id */ +/* + * Marvell OpenRD Base, Client + * http://www.open-rd.org + * OpenRD Base, Client use VID 0x0403 + */ +#define MARVELL_OPENRD_PID 0x9e90 /* www.candapter.com Ewert Energy Systems CANdapter device */ #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ +/* OOCDlink by Joern Kaipf + * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ +#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ + +/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ +/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ +#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 +#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 + +#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ + +/* OpenDCC (www.opendcc.de) product id */ +#define FTDI_OPENDCC_PID 0xBFD8 +#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 +#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA +#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB + +/* + * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) + */ +#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ + +/* DMX4ALL DMX Interfaces */ +#define FTDI_DMX4ALL 0xC850 + +/* + * ASK.fr devices + */ +#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ + +/* www.starting-point-systems.com µChameleon device */ +#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ + +/* + * Tactrix OpenPort (ECU) devices. + * OpenPort 1.3M submitted by Donour Sizemore. + * OpenPort 1.3S and 1.3U submitted by Ian Abbott. + */ +#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ +#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ +#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ + /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ /* the VID is the standard ftdi vid (FTDI_VID) */ #define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ @@ -42,523 +91,280 @@ #define FTDI_SCS_DEVICE_6_PID 0xD016 #define FTDI_SCS_DEVICE_7_PID 0xD017 -/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ -#define FTDI_ACTZWAVE_PID 0xF2D0 +/* iPlus device */ +#define FTDI_IPLUS_PID 0xD070 /* Product Id */ +#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ +/* + * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + */ +#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ -/* www.starting-point-systems.com µChameleon device */ -#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ +/* Propox devices */ +#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 -/* www.irtrans.de device */ -#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ +/* + * Xsens Technologies BV products (http://www.xsens.com). + */ +#define XSENS_CONVERTER_0_PID 0xD388 +#define XSENS_CONVERTER_1_PID 0xD389 +#define XSENS_CONVERTER_2_PID 0xD38A +#define XSENS_CONVERTER_3_PID 0xD38B +#define XSENS_CONVERTER_4_PID 0xD38C +#define XSENS_CONVERTER_5_PID 0xD38D +#define XSENS_CONVERTER_6_PID 0xD38E +#define XSENS_CONVERTER_7_PID 0xD38F +/* + * NDI (www.ndigital.com) product ids + */ +#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ +#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ +#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ +#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ +#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ -/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ -#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ +/* + * Westrex International devices submitted by Cory Lee + */ +#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ +#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ -/* iPlus device */ -#define FTDI_IPLUS_PID 0xD070 /* Product Id */ -#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ +/* + * ACG Identification Technologies GmbH products (http://www.acg.de/). + * Submitted by anton -at- goto10 -dot- org. + */ +#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ -/* DMX4ALL DMX Interfaces */ -#define FTDI_DMX4ALL 0xC850 +/* + * Definitions for Artemis astronomical USB based cameras + * Check it at http://www.artemisccd.co.uk/ + */ +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ -/* OpenDCC (www.opendcc.de) product id */ -#define FTDI_OPENDCC_PID 0xBFD8 -#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 -#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA -#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB +/* + * Definitions for ATIK Instruments astronomical USB based cameras + * Check it at http://www.atik-instruments.com/ + */ +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ +#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ +#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ +#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ -/* Sprog II (Andrew Crosland's SprogII DCC interface) */ -#define FTDI_SPROG_II 0xF0C8 +/* + * Yost Engineering, Inc. products (www.yostengineering.com). + * PID 0xE050 submitted by Aaron Prose. + */ +#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ -/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ -/* they use the ftdi chipset for the USB interface and the vendor id is the same */ -#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ -#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ -#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ -#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ -#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ -#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ -#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ -#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ +/* + * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). + * All of these devices use FTDI's vendor ID (0x0403). + * + * The previously included PID for the UO 100 module was incorrect. + * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). + * + * Armin Laeuger originally sent the PID for the UM 100 module. + */ +#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ +#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ +#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ +#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ +#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ +#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ +#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ +#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ +#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ +#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ +#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ +#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ +#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ +#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ +#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ +#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ +#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ +#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ +#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ +#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ +#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ +#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ +/* Additional ELV PIDs that default to using the FTDI D2XX drivers on + * MS Windows, rather than the FTDI Virtual Com Port drivers. + * Maybe these will be easier to use with the libftdi/libusb user-space + * drivers, or possibly the Comedi drivers in some cases. */ +#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ +#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ +#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ +#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ +#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ -/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ -/* broadband internet service. The following PID is exhibited by the usb device supplied */ -/* (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ +/* + * EVER Eco Pro UPS (http://www.ever.com.pl/) + */ + +#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ /* - * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device - * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) - * (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_PCDJ_DAC2_PID 0xFA88 + * Active Robots product ids. + */ +#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ + +/* Pyramid Computer GmbH */ +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ + +/* www.elsterelectricity.com Elster Unicom III Optical Probe */ +#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ /* - * The following are the values for the Matrix Orbital LCD displays, - * which are the FT232BM ( similar to the 8U232AM ) + * Gude Analog- und Digitalsysteme GmbH */ -#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ +#define FTDI_GUDEADS_E808_PID 0xE808 +#define FTDI_GUDEADS_E809_PID 0xE809 +#define FTDI_GUDEADS_E80A_PID 0xE80A +#define FTDI_GUDEADS_E80B_PID 0xE80B +#define FTDI_GUDEADS_E80C_PID 0xE80C +#define FTDI_GUDEADS_E80D_PID 0xE80D +#define FTDI_GUDEADS_E80E_PID 0xE80E +#define FTDI_GUDEADS_E80F_PID 0xE80F +#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ +#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ +#define FTDI_GUDEADS_E88A_PID 0xE88A +#define FTDI_GUDEADS_E88B_PID 0xE88B +#define FTDI_GUDEADS_E88C_PID 0xE88C +#define FTDI_GUDEADS_E88D_PID 0xE88D +#define FTDI_GUDEADS_E88E_PID 0xE88E +#define FTDI_GUDEADS_E88F_PID 0xE88F -/* OOCDlink by Joern Kaipf - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ -#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ +/* + * Eclo (http://www.eclo.pt/) product IDs. + * PID 0xEA90 submitted by Martin Grill. + */ +#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ + +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ +#define FTDI_TNC_X_PID 0xEBE0 /* - * The following are the values for the Matrix Orbital FTDI Range - * Anything in this range will use an FT232RL. + * Teratronik product ids. + * Submitted by O. Wölfelschneider. */ -#define MTXORB_VID 0x1B3D -#define MTXORB_FTDI_RANGE_0100_PID 0x0100 -#define MTXORB_FTDI_RANGE_0101_PID 0x0101 -#define MTXORB_FTDI_RANGE_0102_PID 0x0102 -#define MTXORB_FTDI_RANGE_0103_PID 0x0103 -#define MTXORB_FTDI_RANGE_0104_PID 0x0104 -#define MTXORB_FTDI_RANGE_0105_PID 0x0105 -#define MTXORB_FTDI_RANGE_0106_PID 0x0106 -#define MTXORB_FTDI_RANGE_0107_PID 0x0107 -#define MTXORB_FTDI_RANGE_0108_PID 0x0108 -#define MTXORB_FTDI_RANGE_0109_PID 0x0109 -#define MTXORB_FTDI_RANGE_010A_PID 0x010A -#define MTXORB_FTDI_RANGE_010B_PID 0x010B -#define MTXORB_FTDI_RANGE_010C_PID 0x010C -#define MTXORB_FTDI_RANGE_010D_PID 0x010D -#define MTXORB_FTDI_RANGE_010E_PID 0x010E -#define MTXORB_FTDI_RANGE_010F_PID 0x010F -#define MTXORB_FTDI_RANGE_0110_PID 0x0110 -#define MTXORB_FTDI_RANGE_0111_PID 0x0111 -#define MTXORB_FTDI_RANGE_0112_PID 0x0112 -#define MTXORB_FTDI_RANGE_0113_PID 0x0113 -#define MTXORB_FTDI_RANGE_0114_PID 0x0114 -#define MTXORB_FTDI_RANGE_0115_PID 0x0115 -#define MTXORB_FTDI_RANGE_0116_PID 0x0116 -#define MTXORB_FTDI_RANGE_0117_PID 0x0117 -#define MTXORB_FTDI_RANGE_0118_PID 0x0118 -#define MTXORB_FTDI_RANGE_0119_PID 0x0119 -#define MTXORB_FTDI_RANGE_011A_PID 0x011A -#define MTXORB_FTDI_RANGE_011B_PID 0x011B -#define MTXORB_FTDI_RANGE_011C_PID 0x011C -#define MTXORB_FTDI_RANGE_011D_PID 0x011D -#define MTXORB_FTDI_RANGE_011E_PID 0x011E -#define MTXORB_FTDI_RANGE_011F_PID 0x011F -#define MTXORB_FTDI_RANGE_0120_PID 0x0120 -#define MTXORB_FTDI_RANGE_0121_PID 0x0121 -#define MTXORB_FTDI_RANGE_0122_PID 0x0122 -#define MTXORB_FTDI_RANGE_0123_PID 0x0123 -#define MTXORB_FTDI_RANGE_0124_PID 0x0124 -#define MTXORB_FTDI_RANGE_0125_PID 0x0125 -#define MTXORB_FTDI_RANGE_0126_PID 0x0126 -#define MTXORB_FTDI_RANGE_0127_PID 0x0127 -#define MTXORB_FTDI_RANGE_0128_PID 0x0128 -#define MTXORB_FTDI_RANGE_0129_PID 0x0129 -#define MTXORB_FTDI_RANGE_012A_PID 0x012A -#define MTXORB_FTDI_RANGE_012B_PID 0x012B -#define MTXORB_FTDI_RANGE_012C_PID 0x012C -#define MTXORB_FTDI_RANGE_012D_PID 0x012D -#define MTXORB_FTDI_RANGE_012E_PID 0x012E -#define MTXORB_FTDI_RANGE_012F_PID 0x012F -#define MTXORB_FTDI_RANGE_0130_PID 0x0130 -#define MTXORB_FTDI_RANGE_0131_PID 0x0131 -#define MTXORB_FTDI_RANGE_0132_PID 0x0132 -#define MTXORB_FTDI_RANGE_0133_PID 0x0133 -#define MTXORB_FTDI_RANGE_0134_PID 0x0134 -#define MTXORB_FTDI_RANGE_0135_PID 0x0135 -#define MTXORB_FTDI_RANGE_0136_PID 0x0136 -#define MTXORB_FTDI_RANGE_0137_PID 0x0137 -#define MTXORB_FTDI_RANGE_0138_PID 0x0138 -#define MTXORB_FTDI_RANGE_0139_PID 0x0139 -#define MTXORB_FTDI_RANGE_013A_PID 0x013A -#define MTXORB_FTDI_RANGE_013B_PID 0x013B -#define MTXORB_FTDI_RANGE_013C_PID 0x013C -#define MTXORB_FTDI_RANGE_013D_PID 0x013D -#define MTXORB_FTDI_RANGE_013E_PID 0x013E -#define MTXORB_FTDI_RANGE_013F_PID 0x013F -#define MTXORB_FTDI_RANGE_0140_PID 0x0140 -#define MTXORB_FTDI_RANGE_0141_PID 0x0141 -#define MTXORB_FTDI_RANGE_0142_PID 0x0142 -#define MTXORB_FTDI_RANGE_0143_PID 0x0143 -#define MTXORB_FTDI_RANGE_0144_PID 0x0144 -#define MTXORB_FTDI_RANGE_0145_PID 0x0145 -#define MTXORB_FTDI_RANGE_0146_PID 0x0146 -#define MTXORB_FTDI_RANGE_0147_PID 0x0147 -#define MTXORB_FTDI_RANGE_0148_PID 0x0148 -#define MTXORB_FTDI_RANGE_0149_PID 0x0149 -#define MTXORB_FTDI_RANGE_014A_PID 0x014A -#define MTXORB_FTDI_RANGE_014B_PID 0x014B -#define MTXORB_FTDI_RANGE_014C_PID 0x014C -#define MTXORB_FTDI_RANGE_014D_PID 0x014D -#define MTXORB_FTDI_RANGE_014E_PID 0x014E -#define MTXORB_FTDI_RANGE_014F_PID 0x014F -#define MTXORB_FTDI_RANGE_0150_PID 0x0150 -#define MTXORB_FTDI_RANGE_0151_PID 0x0151 -#define MTXORB_FTDI_RANGE_0152_PID 0x0152 -#define MTXORB_FTDI_RANGE_0153_PID 0x0153 -#define MTXORB_FTDI_RANGE_0154_PID 0x0154 -#define MTXORB_FTDI_RANGE_0155_PID 0x0155 -#define MTXORB_FTDI_RANGE_0156_PID 0x0156 -#define MTXORB_FTDI_RANGE_0157_PID 0x0157 -#define MTXORB_FTDI_RANGE_0158_PID 0x0158 -#define MTXORB_FTDI_RANGE_0159_PID 0x0159 -#define MTXORB_FTDI_RANGE_015A_PID 0x015A -#define MTXORB_FTDI_RANGE_015B_PID 0x015B -#define MTXORB_FTDI_RANGE_015C_PID 0x015C -#define MTXORB_FTDI_RANGE_015D_PID 0x015D -#define MTXORB_FTDI_RANGE_015E_PID 0x015E -#define MTXORB_FTDI_RANGE_015F_PID 0x015F -#define MTXORB_FTDI_RANGE_0160_PID 0x0160 -#define MTXORB_FTDI_RANGE_0161_PID 0x0161 -#define MTXORB_FTDI_RANGE_0162_PID 0x0162 -#define MTXORB_FTDI_RANGE_0163_PID 0x0163 -#define MTXORB_FTDI_RANGE_0164_PID 0x0164 -#define MTXORB_FTDI_RANGE_0165_PID 0x0165 -#define MTXORB_FTDI_RANGE_0166_PID 0x0166 -#define MTXORB_FTDI_RANGE_0167_PID 0x0167 -#define MTXORB_FTDI_RANGE_0168_PID 0x0168 -#define MTXORB_FTDI_RANGE_0169_PID 0x0169 -#define MTXORB_FTDI_RANGE_016A_PID 0x016A -#define MTXORB_FTDI_RANGE_016B_PID 0x016B -#define MTXORB_FTDI_RANGE_016C_PID 0x016C -#define MTXORB_FTDI_RANGE_016D_PID 0x016D -#define MTXORB_FTDI_RANGE_016E_PID 0x016E -#define MTXORB_FTDI_RANGE_016F_PID 0x016F -#define MTXORB_FTDI_RANGE_0170_PID 0x0170 -#define MTXORB_FTDI_RANGE_0171_PID 0x0171 -#define MTXORB_FTDI_RANGE_0172_PID 0x0172 -#define MTXORB_FTDI_RANGE_0173_PID 0x0173 -#define MTXORB_FTDI_RANGE_0174_PID 0x0174 -#define MTXORB_FTDI_RANGE_0175_PID 0x0175 -#define MTXORB_FTDI_RANGE_0176_PID 0x0176 -#define MTXORB_FTDI_RANGE_0177_PID 0x0177 -#define MTXORB_FTDI_RANGE_0178_PID 0x0178 -#define MTXORB_FTDI_RANGE_0179_PID 0x0179 -#define MTXORB_FTDI_RANGE_017A_PID 0x017A -#define MTXORB_FTDI_RANGE_017B_PID 0x017B -#define MTXORB_FTDI_RANGE_017C_PID 0x017C -#define MTXORB_FTDI_RANGE_017D_PID 0x017D -#define MTXORB_FTDI_RANGE_017E_PID 0x017E -#define MTXORB_FTDI_RANGE_017F_PID 0x017F -#define MTXORB_FTDI_RANGE_0180_PID 0x0180 -#define MTXORB_FTDI_RANGE_0181_PID 0x0181 -#define MTXORB_FTDI_RANGE_0182_PID 0x0182 -#define MTXORB_FTDI_RANGE_0183_PID 0x0183 -#define MTXORB_FTDI_RANGE_0184_PID 0x0184 -#define MTXORB_FTDI_RANGE_0185_PID 0x0185 -#define MTXORB_FTDI_RANGE_0186_PID 0x0186 -#define MTXORB_FTDI_RANGE_0187_PID 0x0187 -#define MTXORB_FTDI_RANGE_0188_PID 0x0188 -#define MTXORB_FTDI_RANGE_0189_PID 0x0189 -#define MTXORB_FTDI_RANGE_018A_PID 0x018A -#define MTXORB_FTDI_RANGE_018B_PID 0x018B -#define MTXORB_FTDI_RANGE_018C_PID 0x018C -#define MTXORB_FTDI_RANGE_018D_PID 0x018D -#define MTXORB_FTDI_RANGE_018E_PID 0x018E -#define MTXORB_FTDI_RANGE_018F_PID 0x018F -#define MTXORB_FTDI_RANGE_0190_PID 0x0190 -#define MTXORB_FTDI_RANGE_0191_PID 0x0191 -#define MTXORB_FTDI_RANGE_0192_PID 0x0192 -#define MTXORB_FTDI_RANGE_0193_PID 0x0193 -#define MTXORB_FTDI_RANGE_0194_PID 0x0194 -#define MTXORB_FTDI_RANGE_0195_PID 0x0195 -#define MTXORB_FTDI_RANGE_0196_PID 0x0196 -#define MTXORB_FTDI_RANGE_0197_PID 0x0197 -#define MTXORB_FTDI_RANGE_0198_PID 0x0198 -#define MTXORB_FTDI_RANGE_0199_PID 0x0199 -#define MTXORB_FTDI_RANGE_019A_PID 0x019A -#define MTXORB_FTDI_RANGE_019B_PID 0x019B -#define MTXORB_FTDI_RANGE_019C_PID 0x019C -#define MTXORB_FTDI_RANGE_019D_PID 0x019D -#define MTXORB_FTDI_RANGE_019E_PID 0x019E -#define MTXORB_FTDI_RANGE_019F_PID 0x019F -#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 -#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 -#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 -#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 -#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 -#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 -#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 -#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 -#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 -#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 -#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA -#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB -#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC -#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD -#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE -#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF -#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 -#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 -#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 -#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 -#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 -#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 -#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 -#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 -#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 -#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 -#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA -#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB -#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC -#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD -#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE -#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF -#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 -#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 -#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 -#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 -#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 -#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 -#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 -#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 -#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 -#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 -#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA -#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB -#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC -#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD -#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE -#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF -#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 -#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 -#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 -#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 -#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 -#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 -#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 -#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 -#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 -#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 -#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA -#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB -#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC -#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD -#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE -#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF -#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 -#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 -#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 -#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 -#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 -#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 -#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 -#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 -#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 -#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 -#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA -#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB -#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC -#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED -#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE -#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF -#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 -#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 -#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 -#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 -#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 -#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 -#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 -#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 -#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 -#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 -#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA -#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB -#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC -#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD -#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE -#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF - - - -/* Interbiometrics USB I/O Board */ -/* Developed for Interbiometrics by Rudolf Gugler */ -#define INTERBIOMETRICS_VID 0x1209 -#define INTERBIOMETRICS_IOBOARD_PID 0x1002 -#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 - -/* - * The following are the values for the Perle Systems - * UltraPort USB serial converters - */ -#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ - -/* - * The following are the values for the Sealevel SeaLINK+ adapters. - * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and - * removed some PIDs that don't seem to match any existing products.) - */ -#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ -#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ -#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ -#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ -#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ -#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ -#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ -#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ -#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ -#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ -#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ -#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ -#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ -#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ -#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ -#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ -#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ -#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ -#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ -#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ -#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ -#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ -#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ -#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ -#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ -#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ -#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ -#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ -#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ -#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ -#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ -#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ -#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ -#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ -#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ -#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ -#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ -#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ -#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ -#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ -#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ -#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ -#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ -#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ -#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ -#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ -#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ -#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ +#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ +#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ -/* - * The following are the values for two KOBIL chipcard terminals. - */ -#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ -#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ -#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ +/* Rig Expert Ukraine devices */ +#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ /* - * Icom ID-1 digital transceiver + * Hameg HO820 and HO870 interface (using VID 0x0403) */ - -#define ICOM_ID1_VID 0x0C26 -#define ICOM_ID1_PID 0x0004 +#define HAMEG_HO820_PID 0xed74 +#define HAMEG_HO870_PID 0xed71 /* - * ASK.fr devices + * MaxStream devices www.maxstream.net */ -#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ +#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ /* - * FTDI USB UART chips used in construction projects from the - * Elektor Electronics magazine (http://elektor-electronics.co.uk) + * microHAM product IDs (http://www.microham.com). + * Submitted by Justin Burket (KL1RL) + * and Mike Studer (K6EEP) . + * Ian Abbott added a few more from the driver INF file. */ -#define ELEKTOR_VID 0x0C7D -#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ +#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ +#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ +#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ +#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ +#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ +#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ +#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ +#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ -/* - * DSS-20 Sync Station for Sony Ericsson P800 - */ -#define FTDI_DSS20_PID 0xFC82 +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ /* - * Home Electronics (www.home-electro.com) USB gadgets + * The following are the values for the Perle Systems + * UltraPort USB serial converters */ -#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ +#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ -/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ -#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 -/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ +/* an infrared receiver for user access control with IR tags */ +#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ -#define FTDI_TNC_X_PID 0xEBE0 +/* ACT Solutions HomePro ZWave interface + (http://www.act-solutions.com/HomePro.htm) */ +#define FTDI_ACTZWAVE_PID 0xF2D0 -/* - * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). - * All of these devices use FTDI's vendor ID (0x0403). - * - * The previously included PID for the UO 100 module was incorrect. - * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). - * - * Armin Laeuger originally sent the PID for the UM 100 module. - */ -#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */ -#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ -#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ -#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ -#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ -/* Additional ELV PIDs that default to using the FTDI D2XX drivers on - * MS Windows, rather than the FTDI Virtual Com Port drivers. - * Maybe these will be easier to use with the libftdi/libusb user-space - * drivers, or possibly the Comedi drivers in some cases. */ -#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ -#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ -#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ -#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ -#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ -#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ -#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ -#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ -#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ -#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ -#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ -#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ -#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ -#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ -#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ -#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ -#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ -#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ -#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ -#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ -#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ -#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ -#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ +/* + * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, + * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices + * and I'm not entirely sure which are used by which. + */ +#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 +#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 /* - * Definitions for ID TECH (www.idt-net.com) devices + * Linx Technologies product ids */ -#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ -#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ +#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ +#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ +#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ +#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ +#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ /* - * Definitions for Omnidirectional Control Technology, Inc. devices + * Oceanic product ids */ -#define OCT_VID 0x0B39 /* OCT vendor ID */ -/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ -/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ -/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ -#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ +#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ -/* an infrared receiver for user access control with IR tags */ -#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ +/* + * SUUNTO product ids + */ +#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ + +/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ +/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ +#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ + +/* CCS Inc. ICDU/ICDU40 product ID - + * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */ +#define FTDI_CCSICDU20_0_PID 0xF9D0 +#define FTDI_CCSICDU40_1_PID 0xF9D1 +#define FTDI_CCSMACHX_2_PID 0xF9D2 +#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 +#define FTDI_CCSICDU64_4_PID 0xF9D4 +#define FTDI_CCSPRIME8_5_PID 0xF9D5 /* - * Definitions for Artemis astronomical USB based cameras - * Check it at http://www.artemisccd.co.uk/ + * The following are the values for the Matrix Orbital LCD displays, + * which are the FT232BM ( similar to the 8U232AM ) */ -#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ +#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ /* - * Definitions for ATIK Instruments astronomical USB based cameras - * Check it at http://www.atik-instruments.com/ + * Home Electronics (www.home-electro.com) USB gadgets */ -#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ -#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ -#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ -#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ -#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ +#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ + +/* Inside Accesso contactless reader (http://www.insidefr.com) */ +#define INSIDE_ACCESSO 0xFAD0 + +/* + * ThorLabs USB motor drivers + */ +#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ /* * Protego product ids @@ -569,75 +375,106 @@ #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ /* - * Gude Analog- und Digitalsysteme GmbH + * DSS-20 Sync Station for Sony Ericsson P800 */ -#define FTDI_GUDEADS_E808_PID 0xE808 -#define FTDI_GUDEADS_E809_PID 0xE809 -#define FTDI_GUDEADS_E80A_PID 0xE80A -#define FTDI_GUDEADS_E80B_PID 0xE80B -#define FTDI_GUDEADS_E80C_PID 0xE80C -#define FTDI_GUDEADS_E80D_PID 0xE80D -#define FTDI_GUDEADS_E80E_PID 0xE80E -#define FTDI_GUDEADS_E80F_PID 0xE80F -#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ -#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ -#define FTDI_GUDEADS_E88A_PID 0xE88A -#define FTDI_GUDEADS_E88B_PID 0xE88B -#define FTDI_GUDEADS_E88C_PID 0xE88C -#define FTDI_GUDEADS_E88D_PID 0xE88D -#define FTDI_GUDEADS_E88E_PID 0xE88E -#define FTDI_GUDEADS_E88F_PID 0xE88F +#define FTDI_DSS20_PID 0xFC82 + +/* www.irtrans.de device */ +#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ /* - * Linx Technologies product ids + * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID) + * CAN fieldbus interface adapter, added by port GmbH www.port.de) + * Ian Abbott changed the macro names for consistency. */ -#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ -#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ -#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ -#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ -#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ +#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ +/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ +#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ -/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ -/* unit for PIC16's/PIC18's */ -#define FTDI_CCSICDU20_0_PID 0xF9D0 -#define FTDI_CCSICDU40_1_PID 0xF9D1 -#define FTDI_CCSMACHX_2_PID 0xF9D2 -#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 -#define FTDI_CCSICDU64_4_PID 0xF9D4 -#define FTDI_CCSPRIME8_5_PID 0xF9D5 +#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 (FTDI_VID) */ -/* Inside Accesso contactless reader (http://www.insidefr.com) */ -#define INSIDE_ACCESSO 0xFAD0 +#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ /* - * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI + * PCDJ use ftdi based dj-controllers. The following PID is + * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp + * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen) */ -#define INTREPID_VID 0x093C -#define INTREPID_VALUECAN_PID 0x0601 -#define INTREPID_NEOVI_PID 0x0701 +#define FTDI_PCDJ_DAC2_PID 0xFA88 + +#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG (FTDI_VID) */ /* - * Falcom Wireless Communications GmbH + * DIEBOLD BCS SE923 (FTDI_VID) */ -#define FALCOM_VID 0x0F94 /* Vendor Id */ -#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ -#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* www.crystalfontz.com devices + * - thanx for providing free devices for evaluation ! + * they use the ftdi chipset for the USB interface + * and the vendor id is the same + */ +#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ +#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ +#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ +#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ +#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ +#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ +#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ +#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ /* - * SUUNTO product ids + * Video Networks Limited / Homechoice in the UK use an ftdi-based device + * for their 1Mb broadband internet service. The following PID is exhibited + * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ +#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ + +/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */ +#define FTDI_AMC232_PID 0xFF00 /* Product Id */ /* - * Oceanic product ids + * IBS elektronik product ids (FTDI_VID) + * Submitted by Thomas Schleusener */ -#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ +#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ +#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ +#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ +#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ +#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ +#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ +#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ +#define FTDI_IBS_PROD_PID 0xff3f /* future device */ +/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */ +#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ + + + +/********************************/ +/** third-party VID/PID combos **/ +/********************************/ + + /* - * TTi (Thurlby Thandar Instruments) + * Atmel STK541 */ -#define TTI_VID 0x103E /* Vendor Id */ -#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ +#define ATMEL_VID 0x03eb /* Vendor ID */ +#define STK541_PID 0x2109 /* Zigbee Controller */ + +/* + * Blackfin gnICE JTAG + * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice + */ +#define ADI_VID 0x0456 +#define ADI_GNICE_PID 0xF000 +#define ADI_GNICEPLUS_PID 0xF001 + +/* + * RATOC REX-USB60F + */ +#define RATOC_VENDOR_ID 0x0584 +#define RATOC_PRODUCT_ID_USB60F 0xb020 /* * Definitions for B&B Electronics products. @@ -662,141 +499,147 @@ #define BANDB_ZZ_PROG1_USB_PID 0xBA02 /* - * RM Michaelides CANview USB (http://www.rmcan.com) - * CAN fieldbus interface adapter, added by port GmbH www.port.de) - * Ian Abbott changed the macro names for consistency. - */ -#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ - -/* - * EVER Eco Pro UPS (http://www.ever.com.pl/) - */ - -#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ - -/* - * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, - * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices - * and I'm not entirely sure which are used by which. - */ -#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 -#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 - -/* - * Mobility Electronics products. - */ -#define MOBILITY_VID 0x1342 -#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ - -/* - * microHAM product IDs (http://www.microham.com). - * Submitted by Justin Burket (KL1RL) - * and Mike Studer (K6EEP) . - * Ian Abbott added a few more from the driver INF file. - */ -#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ -#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ -#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ -#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ -#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ -#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ -#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ -#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ - -/* - * Active Robots product ids. - */ -#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ - -/* - * Xsens Technologies BV products (http://www.xsens.com). + * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI */ -#define XSENS_CONVERTER_0_PID 0xD388 -#define XSENS_CONVERTER_1_PID 0xD389 -#define XSENS_CONVERTER_2_PID 0xD38A -#define XSENS_CONVERTER_3_PID 0xD38B -#define XSENS_CONVERTER_4_PID 0xD38C -#define XSENS_CONVERTER_5_PID 0xD38D -#define XSENS_CONVERTER_6_PID 0xD38E -#define XSENS_CONVERTER_7_PID 0xD38F +#define INTREPID_VID 0x093C +#define INTREPID_VALUECAN_PID 0x0601 +#define INTREPID_NEOVI_PID 0x0701 /* - * Teratronik product ids. - * Submitted by O. Wölfelschneider. + * Definitions for ID TECH (www.idt-net.com) devices */ -#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ -#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ +#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ +#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ /* - * Evolution Robotics products (http://www.evolution.com/). - * Submitted by Shawn M. Lavelle. + * Definitions for Omnidirectional Control Technology, Inc. devices */ -#define EVOLUTION_VID 0xDEEE /* Vendor ID */ -#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ -#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ -#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ -#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ - -/* Pyramid Computer GmbH */ -#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ +#define OCT_VID 0x0B39 /* OCT vendor ID */ +/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ +/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ +/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ +#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ /* - * NDI (www.ndigital.com) product ids + * Icom ID-1 digital transceiver */ -#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ -#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ -#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ -#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ -#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ + +#define ICOM_ID1_VID 0x0C26 +#define ICOM_ID1_PID 0x0004 /* - * Posiflex inc retail equipment (http://www.posiflex.com.tw) + * GN Otometrics (http://www.otometrics.com) + * Submitted by Ville Sundberg. */ -#define POSIFLEX_VID 0x0d3a /* Vendor ID */ -#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ +#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ +#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ /* - * Westrex International devices submitted by Cory Lee + * The following are the values for the Sealevel SeaLINK+ adapters. + * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and + * removed some PIDs that don't seem to match any existing products.) */ -#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ -#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ +#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ +#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ +#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ +#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ +#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ +#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ +#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ +#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ +#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ +#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ +#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ +#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ +#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ +#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ +#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ +#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ +#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ +#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ +#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ +#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ +#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ +#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ +#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ +#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ +#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ +#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ +#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ +#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ +#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ +#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ +#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ +#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ +#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ +#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ +#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ +#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ +#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ +#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ +#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ +#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ +#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ +#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ +#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ +#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ +#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ +#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ +#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ +#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ /* - * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) + * JETI SPECTROMETER SPECBOS 1201 + * http://www.jeti.com/products/sys/scb/scb1201.php */ -#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ +#define JETI_VID 0x0c6c +#define JETI_SPC1201_PID 0x04b2 /* - * Eclo (http://www.eclo.pt/) product IDs. - * PID 0xEA90 submitted by Martin Grill. + * FTDI USB UART chips used in construction projects from the + * Elektor Electronics magazine (http://elektor-electronics.co.uk) */ -#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ +#define ELEKTOR_VID 0x0C7D +#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ /* - * Papouch products (http://www.papouch.com/) - * Submitted by Folkert van Heusden + * Posiflex inc retail equipment (http://www.posiflex.com.tw) */ - -#define PAPOUCH_VID 0x5050 /* Vendor ID */ -#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ -#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ +#define POSIFLEX_VID 0x0d3a /* Vendor ID */ +#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ /* - * ACG Identification Technologies GmbH products (http://www.acg.de/). - * Submitted by anton -at- goto10 -dot- org. + * The following are the values for two KOBIL chipcard terminals. */ -#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ +#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ +#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ +#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ + +#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ +#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ /* - * Yost Engineering, Inc. products (www.yostengineering.com). - * PID 0xE050 submitted by Aaron Prose. + * Falcom Wireless Communications GmbH */ -#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ +#define FALCOM_VID 0x0F94 /* Vendor Id */ +#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ +#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ + +/* Larsen and Brusgaard AltiTrack/USBtrack */ +#define LARSENBRUSGAARD_VID 0x0FD8 +#define LB_ALTITRACK_PID 0x0001 /* - * ThorLabs USB motor drivers + * TTi (Thurlby Thandar Instruments) */ -#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ +#define TTI_VID 0x103E /* Vendor Id */ +#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ + +/* Interbiometrics USB I/O Board */ +/* Developed for Interbiometrics by Rudolf Gugler */ +#define INTERBIOMETRICS_VID 0x1209 +#define INTERBIOMETRICS_IOBOARD_PID 0x1002 +#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 /* * Testo products (http://www.testo.com/) @@ -806,18 +649,21 @@ #define TESTO_USB_INTERFACE_PID 0x0001 /* - * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + * Mobility Electronics products. */ -#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ +#define MOBILITY_VID 0x1342 +#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ /* - * Tactrix OpenPort (ECU) devices. - * OpenPort 1.3M submitted by Donour Sizemore. - * OpenPort 1.3S and 1.3U submitted by Ian Abbott. + * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 + * Submitted by Harald Welte */ -#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ -#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ -#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ +#define FIC_VID 0x1457 +#define FIC_NEO1973_DEBUG_PID 0x5118 + +/* Olimex */ +#define OLIMEX_VID 0x15BA +#define OLIMEX_ARM_USB_OCD_PID 0x0003 /* * Telldus Technologies @@ -826,34 +672,275 @@ #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ /* - * IBS elektronik product ids - * Submitted by Thomas Schleusener + * Bayer Ascensia Contour blood glucose meter USB-converter cable. + * http://winglucofacts.com/cables/ */ -#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ -#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ -#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ -#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ -#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ -#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ -#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ -#define FTDI_IBS_PROD_PID 0xff3f /* future device */ +#define BAYER_VID 0x1A79 +#define BAYER_CONTOUR_CABLE_PID 0x6001 /* - * MaxStream devices www.maxstream.net + * The following are the values for the Matrix Orbital FTDI Range + * Anything in this range will use an FT232RL. */ -#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ - -/* Olimex */ -#define OLIMEX_VID 0x15BA -#define OLIMEX_ARM_USB_OCD_PID 0x0003 +#define MTXORB_VID 0x1B3D +#define MTXORB_FTDI_RANGE_0100_PID 0x0100 +#define MTXORB_FTDI_RANGE_0101_PID 0x0101 +#define MTXORB_FTDI_RANGE_0102_PID 0x0102 +#define MTXORB_FTDI_RANGE_0103_PID 0x0103 +#define MTXORB_FTDI_RANGE_0104_PID 0x0104 +#define MTXORB_FTDI_RANGE_0105_PID 0x0105 +#define MTXORB_FTDI_RANGE_0106_PID 0x0106 +#define MTXORB_FTDI_RANGE_0107_PID 0x0107 +#define MTXORB_FTDI_RANGE_0108_PID 0x0108 +#define MTXORB_FTDI_RANGE_0109_PID 0x0109 +#define MTXORB_FTDI_RANGE_010A_PID 0x010A +#define MTXORB_FTDI_RANGE_010B_PID 0x010B +#define MTXORB_FTDI_RANGE_010C_PID 0x010C +#define MTXORB_FTDI_RANGE_010D_PID 0x010D +#define MTXORB_FTDI_RANGE_010E_PID 0x010E +#define MTXORB_FTDI_RANGE_010F_PID 0x010F +#define MTXORB_FTDI_RANGE_0110_PID 0x0110 +#define MTXORB_FTDI_RANGE_0111_PID 0x0111 +#define MTXORB_FTDI_RANGE_0112_PID 0x0112 +#define MTXORB_FTDI_RANGE_0113_PID 0x0113 +#define MTXORB_FTDI_RANGE_0114_PID 0x0114 +#define MTXORB_FTDI_RANGE_0115_PID 0x0115 +#define MTXORB_FTDI_RANGE_0116_PID 0x0116 +#define MTXORB_FTDI_RANGE_0117_PID 0x0117 +#define MTXORB_FTDI_RANGE_0118_PID 0x0118 +#define MTXORB_FTDI_RANGE_0119_PID 0x0119 +#define MTXORB_FTDI_RANGE_011A_PID 0x011A +#define MTXORB_FTDI_RANGE_011B_PID 0x011B +#define MTXORB_FTDI_RANGE_011C_PID 0x011C +#define MTXORB_FTDI_RANGE_011D_PID 0x011D +#define MTXORB_FTDI_RANGE_011E_PID 0x011E +#define MTXORB_FTDI_RANGE_011F_PID 0x011F +#define MTXORB_FTDI_RANGE_0120_PID 0x0120 +#define MTXORB_FTDI_RANGE_0121_PID 0x0121 +#define MTXORB_FTDI_RANGE_0122_PID 0x0122 +#define MTXORB_FTDI_RANGE_0123_PID 0x0123 +#define MTXORB_FTDI_RANGE_0124_PID 0x0124 +#define MTXORB_FTDI_RANGE_0125_PID 0x0125 +#define MTXORB_FTDI_RANGE_0126_PID 0x0126 +#define MTXORB_FTDI_RANGE_0127_PID 0x0127 +#define MTXORB_FTDI_RANGE_0128_PID 0x0128 +#define MTXORB_FTDI_RANGE_0129_PID 0x0129 +#define MTXORB_FTDI_RANGE_012A_PID 0x012A +#define MTXORB_FTDI_RANGE_012B_PID 0x012B +#define MTXORB_FTDI_RANGE_012C_PID 0x012C +#define MTXORB_FTDI_RANGE_012D_PID 0x012D +#define MTXORB_FTDI_RANGE_012E_PID 0x012E +#define MTXORB_FTDI_RANGE_012F_PID 0x012F +#define MTXORB_FTDI_RANGE_0130_PID 0x0130 +#define MTXORB_FTDI_RANGE_0131_PID 0x0131 +#define MTXORB_FTDI_RANGE_0132_PID 0x0132 +#define MTXORB_FTDI_RANGE_0133_PID 0x0133 +#define MTXORB_FTDI_RANGE_0134_PID 0x0134 +#define MTXORB_FTDI_RANGE_0135_PID 0x0135 +#define MTXORB_FTDI_RANGE_0136_PID 0x0136 +#define MTXORB_FTDI_RANGE_0137_PID 0x0137 +#define MTXORB_FTDI_RANGE_0138_PID 0x0138 +#define MTXORB_FTDI_RANGE_0139_PID 0x0139 +#define MTXORB_FTDI_RANGE_013A_PID 0x013A +#define MTXORB_FTDI_RANGE_013B_PID 0x013B +#define MTXORB_FTDI_RANGE_013C_PID 0x013C +#define MTXORB_FTDI_RANGE_013D_PID 0x013D +#define MTXORB_FTDI_RANGE_013E_PID 0x013E +#define MTXORB_FTDI_RANGE_013F_PID 0x013F +#define MTXORB_FTDI_RANGE_0140_PID 0x0140 +#define MTXORB_FTDI_RANGE_0141_PID 0x0141 +#define MTXORB_FTDI_RANGE_0142_PID 0x0142 +#define MTXORB_FTDI_RANGE_0143_PID 0x0143 +#define MTXORB_FTDI_RANGE_0144_PID 0x0144 +#define MTXORB_FTDI_RANGE_0145_PID 0x0145 +#define MTXORB_FTDI_RANGE_0146_PID 0x0146 +#define MTXORB_FTDI_RANGE_0147_PID 0x0147 +#define MTXORB_FTDI_RANGE_0148_PID 0x0148 +#define MTXORB_FTDI_RANGE_0149_PID 0x0149 +#define MTXORB_FTDI_RANGE_014A_PID 0x014A +#define MTXORB_FTDI_RANGE_014B_PID 0x014B +#define MTXORB_FTDI_RANGE_014C_PID 0x014C +#define MTXORB_FTDI_RANGE_014D_PID 0x014D +#define MTXORB_FTDI_RANGE_014E_PID 0x014E +#define MTXORB_FTDI_RANGE_014F_PID 0x014F +#define MTXORB_FTDI_RANGE_0150_PID 0x0150 +#define MTXORB_FTDI_RANGE_0151_PID 0x0151 +#define MTXORB_FTDI_RANGE_0152_PID 0x0152 +#define MTXORB_FTDI_RANGE_0153_PID 0x0153 +#define MTXORB_FTDI_RANGE_0154_PID 0x0154 +#define MTXORB_FTDI_RANGE_0155_PID 0x0155 +#define MTXORB_FTDI_RANGE_0156_PID 0x0156 +#define MTXORB_FTDI_RANGE_0157_PID 0x0157 +#define MTXORB_FTDI_RANGE_0158_PID 0x0158 +#define MTXORB_FTDI_RANGE_0159_PID 0x0159 +#define MTXORB_FTDI_RANGE_015A_PID 0x015A +#define MTXORB_FTDI_RANGE_015B_PID 0x015B +#define MTXORB_FTDI_RANGE_015C_PID 0x015C +#define MTXORB_FTDI_RANGE_015D_PID 0x015D +#define MTXORB_FTDI_RANGE_015E_PID 0x015E +#define MTXORB_FTDI_RANGE_015F_PID 0x015F +#define MTXORB_FTDI_RANGE_0160_PID 0x0160 +#define MTXORB_FTDI_RANGE_0161_PID 0x0161 +#define MTXORB_FTDI_RANGE_0162_PID 0x0162 +#define MTXORB_FTDI_RANGE_0163_PID 0x0163 +#define MTXORB_FTDI_RANGE_0164_PID 0x0164 +#define MTXORB_FTDI_RANGE_0165_PID 0x0165 +#define MTXORB_FTDI_RANGE_0166_PID 0x0166 +#define MTXORB_FTDI_RANGE_0167_PID 0x0167 +#define MTXORB_FTDI_RANGE_0168_PID 0x0168 +#define MTXORB_FTDI_RANGE_0169_PID 0x0169 +#define MTXORB_FTDI_RANGE_016A_PID 0x016A +#define MTXORB_FTDI_RANGE_016B_PID 0x016B +#define MTXORB_FTDI_RANGE_016C_PID 0x016C +#define MTXORB_FTDI_RANGE_016D_PID 0x016D +#define MTXORB_FTDI_RANGE_016E_PID 0x016E +#define MTXORB_FTDI_RANGE_016F_PID 0x016F +#define MTXORB_FTDI_RANGE_0170_PID 0x0170 +#define MTXORB_FTDI_RANGE_0171_PID 0x0171 +#define MTXORB_FTDI_RANGE_0172_PID 0x0172 +#define MTXORB_FTDI_RANGE_0173_PID 0x0173 +#define MTXORB_FTDI_RANGE_0174_PID 0x0174 +#define MTXORB_FTDI_RANGE_0175_PID 0x0175 +#define MTXORB_FTDI_RANGE_0176_PID 0x0176 +#define MTXORB_FTDI_RANGE_0177_PID 0x0177 +#define MTXORB_FTDI_RANGE_0178_PID 0x0178 +#define MTXORB_FTDI_RANGE_0179_PID 0x0179 +#define MTXORB_FTDI_RANGE_017A_PID 0x017A +#define MTXORB_FTDI_RANGE_017B_PID 0x017B +#define MTXORB_FTDI_RANGE_017C_PID 0x017C +#define MTXORB_FTDI_RANGE_017D_PID 0x017D +#define MTXORB_FTDI_RANGE_017E_PID 0x017E +#define MTXORB_FTDI_RANGE_017F_PID 0x017F +#define MTXORB_FTDI_RANGE_0180_PID 0x0180 +#define MTXORB_FTDI_RANGE_0181_PID 0x0181 +#define MTXORB_FTDI_RANGE_0182_PID 0x0182 +#define MTXORB_FTDI_RANGE_0183_PID 0x0183 +#define MTXORB_FTDI_RANGE_0184_PID 0x0184 +#define MTXORB_FTDI_RANGE_0185_PID 0x0185 +#define MTXORB_FTDI_RANGE_0186_PID 0x0186 +#define MTXORB_FTDI_RANGE_0187_PID 0x0187 +#define MTXORB_FTDI_RANGE_0188_PID 0x0188 +#define MTXORB_FTDI_RANGE_0189_PID 0x0189 +#define MTXORB_FTDI_RANGE_018A_PID 0x018A +#define MTXORB_FTDI_RANGE_018B_PID 0x018B +#define MTXORB_FTDI_RANGE_018C_PID 0x018C +#define MTXORB_FTDI_RANGE_018D_PID 0x018D +#define MTXORB_FTDI_RANGE_018E_PID 0x018E +#define MTXORB_FTDI_RANGE_018F_PID 0x018F +#define MTXORB_FTDI_RANGE_0190_PID 0x0190 +#define MTXORB_FTDI_RANGE_0191_PID 0x0191 +#define MTXORB_FTDI_RANGE_0192_PID 0x0192 +#define MTXORB_FTDI_RANGE_0193_PID 0x0193 +#define MTXORB_FTDI_RANGE_0194_PID 0x0194 +#define MTXORB_FTDI_RANGE_0195_PID 0x0195 +#define MTXORB_FTDI_RANGE_0196_PID 0x0196 +#define MTXORB_FTDI_RANGE_0197_PID 0x0197 +#define MTXORB_FTDI_RANGE_0198_PID 0x0198 +#define MTXORB_FTDI_RANGE_0199_PID 0x0199 +#define MTXORB_FTDI_RANGE_019A_PID 0x019A +#define MTXORB_FTDI_RANGE_019B_PID 0x019B +#define MTXORB_FTDI_RANGE_019C_PID 0x019C +#define MTXORB_FTDI_RANGE_019D_PID 0x019D +#define MTXORB_FTDI_RANGE_019E_PID 0x019E +#define MTXORB_FTDI_RANGE_019F_PID 0x019F +#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 +#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 +#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 +#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 +#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 +#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 +#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 +#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 +#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 +#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 +#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA +#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB +#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC +#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD +#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE +#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF +#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 +#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 +#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 +#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 +#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 +#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 +#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 +#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 +#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 +#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 +#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA +#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB +#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC +#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD +#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE +#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF +#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 +#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 +#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 +#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 +#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 +#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 +#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 +#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 +#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 +#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 +#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA +#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB +#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC +#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD +#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE +#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF +#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 +#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 +#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 +#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 +#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 +#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 +#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 +#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 +#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 +#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 +#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA +#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB +#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC +#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD +#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE +#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF +#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 +#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 +#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 +#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 +#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 +#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 +#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 +#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 +#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 +#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 +#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA +#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB +#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC +#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED +#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE +#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF +#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 +#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 +#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 +#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 +#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 +#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 +#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 +#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 +#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 +#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 +#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA +#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB +#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC +#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD +#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE +#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF -/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ -/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ -#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 -#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 -/* www.elsterelectricity.com Elster Unicom III Optical Probe */ -#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ /* * The Mobility Lab (TML) @@ -862,44 +949,10 @@ #define TML_VID 0x1B91 /* Vendor ID */ #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ -/* Propox devices */ -#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 - -/* Rig Expert Ukraine devices */ -#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ - -/* Domintell products http://www.domintell.com */ -#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ -#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ - /* Alti-2 products http://www.alti-2.com */ #define ALTI2_VID 0x1BC9 #define ALTI2_N3_PID 0x6001 /* Neptune 3 */ -/* - * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 - * Submitted by Harald Welte - */ -#define FIC_VID 0x1457 -#define FIC_NEO1973_DEBUG_PID 0x5118 - -/* - * RATOC REX-USB60F - */ -#define RATOC_VENDOR_ID 0x0584 -#define RATOC_PRODUCT_ID_USB60F 0xb020 - -/* - * DIEBOLD BCS SE923 - */ -#define DIEBOLD_BCS_SE923_PID 0xfb99 - -/* - * Atmel STK541 - */ -#define ATMEL_VID 0x03eb /* Vendor ID */ -#define STK541_PID 0x2109 /* Zigbee Controller */ - /* * Dresden Elektronic Sensor Terminal Board */ @@ -908,19 +961,13 @@ #define WHT_PID 0x0004 /* Wireless Handheld Terminal */ /* - * Blackfin gnICE JTAG - * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice + * Papouch products (http://www.papouch.com/) + * Submitted by Folkert van Heusden */ -#define ADI_VID 0x0456 -#define ADI_GNICE_PID 0xF000 -#define ADI_GNICEPLUS_PID 0xF001 -/* - * JETI SPECTROMETER SPECBOS 1201 - * http://www.jeti.com/products/sys/scb/scb1201.php - */ -#define JETI_VID 0x0c6c -#define JETI_SPC1201_PID 0x04b2 +#define PAPOUCH_VID 0x5050 /* Vendor ID */ +#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ /* * Marvell SheevaPlug @@ -928,32 +975,12 @@ #define MARVELL_VID 0x9e88 #define MARVELL_SHEEVAPLUG_PID 0x9e8f -#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ - /* - * GN Otometrics (http://www.otometrics.com) - * Submitted by Ville Sundberg. - */ -#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ -#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ - -/* - * Bayer Ascensia Contour blood glucose meter USB-converter cable. - * http://winglucofacts.com/cables/ - */ -#define BAYER_VID 0x1A79 -#define BAYER_CONTOUR_CABLE_PID 0x6001 - -/* - * Marvell OpenRD Base, Client - * http://www.open-rd.org - * OpenRD Base, Client use VID 0x0403 - */ -#define MARVELL_OPENRD_PID 0x9e90 - -/* - * Hameg HO820 and HO870 interface (using VID 0x0403) + * Evolution Robotics products (http://www.evolution.com/). + * Submitted by Shawn M. Lavelle. */ -#define HAMEG_HO820_PID 0xed74 -#define HAMEG_HO870_PID 0xed71 - +#define EVOLUTION_VID 0xDEEE /* Vendor ID */ +#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ +#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ +#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ -- GitLab From 95962a773ca5c1e52305fd1003d3bda59abbf371 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 16 Dec 2009 20:38:31 +0300 Subject: [PATCH 598/618] USB: musb_gadget: fix kernel oops in txstate() Commit 7723de7e19b744144975a09c81777ec0f14ac5b3 (USB: musb_gadget: remove pointless loop) included uncalled for (and incorrect) optimization that might cause a kernel oops in txstate() -- undo it. Signed-off-by: Sergei Shtylyov Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index c49b9ba025ab..4dea14609252 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -515,12 +515,12 @@ void musb_g_tx(struct musb *musb, u8 epnum) if (csr & MUSB_TXCSR_FIFONOTEMPTY) return; - if (!musb_ep->desc) { + request = musb_ep->desc ? next_request(musb_ep) : NULL; + if (!request) { DBG(4, "%s idle now\n", musb_ep->end_point.name); return; - } else - request = next_request(musb_ep); + } } txstate(musb, to_musb_request(request)); -- GitLab From e3060b175c1bd60586f51482464530dd1b37f3cf Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Dec 2009 11:08:41 +0200 Subject: [PATCH 599/618] USB: musb: move musb_remove to __exit probe() already was on __init, so moving remove() to __exit. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index bfe08f4975a3..1041bb734bb4 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2139,7 +2139,7 @@ static int __init musb_probe(struct platform_device *pdev) return musb_init_controller(dev, irq, base); } -static int __devexit musb_remove(struct platform_device *pdev) +static int __exit musb_remove(struct platform_device *pdev) { struct musb *musb = dev_to_musb(&pdev->dev); void __iomem *ctrl_base = musb->ctrl_base; @@ -2231,7 +2231,7 @@ static struct platform_driver musb_driver = { .owner = THIS_MODULE, .pm = MUSB_DEV_PM_OPS, }, - .remove = __devexit_p(musb_remove), + .remove = __exit_p(musb_remove), .shutdown = musb_shutdown, }; -- GitLab From f95c4c0186aa94ad41681d8f0ecd79cc45f92bda Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Tue, 15 Dec 2009 11:08:44 +0200 Subject: [PATCH 600/618] USB: musb: fix compiling warning with min() macro Current musb gadget dma code produces the warning: drivers/usb/musb/musb_gadget.c: In function 'txstate': drivers/usb/musb/musb_gadget.c:312: warning: comparison of distinct pointer types lacks a cast So switch to min_t(size_t, ...). Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 4dea14609252..0c36925c5934 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -309,7 +309,7 @@ static void txstate(struct musb *musb, struct musb_request *req) size_t request_size; /* setup DMA, then program endpoint CSR */ - request_size = min(request->length, + request_size = min_t(size_t, request->length, musb_ep->dma->max_len); if (request_size < musb_ep->packet_sz) musb_ep->dma->desired_mode = 0; -- GitLab From 8a700f3d0d34a79c9cb25f2c66552c181f9c5737 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Dec 2009 11:08:45 +0200 Subject: [PATCH 601/618] USB: musb: MAINTAINERS: Fix my tree's address The tree is now on a new address. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index d5244f1580bc..745643b8c344 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3679,7 +3679,7 @@ F: include/linux/isicom.h MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER M: Felipe Balbi L: linux-usb@vger.kernel.org -T: git git://gitorious.org/musb/mainline.git +T: git git://gitorious.org/usb/usb.git S: Maintained F: drivers/usb/musb/ -- GitLab From a2396a32b848a9864f933ced860192c72c769aca Mon Sep 17 00:00:00 2001 From: Swaminathan S Date: Tue, 15 Dec 2009 13:29:57 +0200 Subject: [PATCH 602/618] USB: musb: Populate the VBUS GPIO with the correct GPIO number This fixes a null-pointer dereference bug. Signed-off-by: Swaminathan S Cc: David Brownell Acked-by: Sergei Shtylyov Acked-by: Anand Gadiyar Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/davinci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index e16ff605c458..66913811af5e 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -42,7 +42,7 @@ #include "musb_core.h" #ifdef CONFIG_MACH_DAVINCI_EVM -#define GPIO_nVBUS_DRV 144 +#define GPIO_nVBUS_DRV 160 #endif #include "davinci.h" -- GitLab From d4c433fe6f04195a1a0d2146d9f11ad45eecef86 Mon Sep 17 00:00:00 2001 From: Arnaud Mandy Date: Tue, 15 Dec 2009 13:29:58 +0200 Subject: [PATCH 603/618] USB: musb: gadget: set otg tranceiver to idle when registering gadget When registering gadget driver, the state of the transceiver must be set from undefined (no gadget) to b_idle. Module unload sets the transceiver state to undefined state. After the first load/unload pair, the reset irq will be lost. Signed-off-by: Arnaud Mandy Signed-off-by: Felipe Balbi Cc: David Brownell Acked-by: Anand Gadiyar Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 0c36925c5934..e164999bd364 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1731,6 +1731,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) spin_lock_irqsave(&musb->lock, flags); otg_set_peripheral(musb->xceiv, &musb->g); + musb->xceiv->state = OTG_STATE_B_IDLE; musb->is_active = 1; /* FIXME this ignores the softconnect flag. Drivers are -- GitLab From cd42fef0a0b061817904fd6feb0de66830794857 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Dec 2009 13:47:30 +0200 Subject: [PATCH 604/618] USB: musb: do not work if no gadget driver is loaded On OTG and gadget-only configurations, we need a gadget driver in order to work properly, so avoid changing operation modes when there's no gadget driver loaded. Signed-off-by: Felipe Balbi Cc: David Brownell Acked-by: Anand Gadiyar Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 1041bb734bb4..24ff09754e0c 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1521,6 +1521,14 @@ irqreturn_t musb_interrupt(struct musb *musb) (devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral", musb->int_usb, musb->int_tx, musb->int_rx); +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + if (is_otg_enabled(musb) || is_peripheral_enabled(musb)) + if (!musb->gadget_driver) { + DBG(5, "No gadget driver loaded\n"); + return IRQ_HANDLED; + } +#endif + /* the core can interrupt us for multiple reasons; docs have * a generic interrupt flowchart to follow */ -- GitLab From 93aa3dab008421789aa0f8865a62a52ae13269a3 Mon Sep 17 00:00:00 2001 From: Swaminathan S Date: Tue, 15 Dec 2009 13:30:00 +0200 Subject: [PATCH 605/618] USB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabled Race condition exists between the cppi_interrupt handler and davinci_interrupt handler w.r.t completing a TX IO. Since DM646x has seperate DMA and USB endpoint interrupts cppi_interrupt handler needs to hold the lock while operating on the endpoint. Update over previous patch to avoid taking the lock if already taken. Tested on DM644x, DM355 and DM646x platforms. Signed-off-by: Swaminathan S Acked-by: Sergei Shtylyov Acked-by: Anand Gadiyar Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/cppi_dma.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index ef2332a9941d..a44a450c860d 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1154,8 +1154,11 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) struct musb_hw_ep *hw_ep = NULL; u32 rx, tx; int i, index; + unsigned long flags; cppi = container_of(musb->dma_controller, struct cppi, controller); + if (cppi->irq) + spin_lock_irqsave(&musb->lock, flags); tibase = musb->ctrl_base; @@ -1285,6 +1288,9 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) /* write to CPPI EOI register to re-enable interrupts */ musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0); + if (cppi->irq) + spin_unlock_irqrestore(&musb->lock, flags); + return IRQ_HANDLED; } -- GitLab From 17be5c5f5ef99c94374e07f71effa78e93a20eda Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 15 Dec 2009 13:30:01 +0200 Subject: [PATCH 606/618] USB: musb: gadget_ep0: avoid SetupEnd interrupt Gadget stalling a zero-length SETUP request results in this error message: SetupEnd came in a wrong ep0stage idle In order to avoid it, always set the CSR0.DataEnd bit after detecting a zero- length request. Add the missing '\n' to the error message itself as well... Signed-off-by: Sergei Shtylyov Acked-by: Anand Gadiyar Cc: stable Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget_ep0.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 8fba3f11e473..53d06451f820 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -664,7 +664,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; break; default: - ERR("SetupEnd came in a wrong ep0stage %s", + ERR("SetupEnd came in a wrong ep0stage %s\n", decode_ep0stage(musb->ep0_state)); } csr = musb_readw(regs, MUSB_CSR0); @@ -787,12 +787,18 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) handled = service_zero_data_request( musb, &setup); + /* + * We're expecting no data in any case, so + * always set the DATAEND bit -- doing this + * here helps avoid SetupEnd interrupt coming + * in the idle stage when we're stalling... + */ + musb->ackpend |= MUSB_CSR0_P_DATAEND; + /* status stage might be immediate */ - if (handled > 0) { - musb->ackpend |= MUSB_CSR0_P_DATAEND; + if (handled > 0) musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; - } break; /* sequence #1 (IN to host), includes GET_STATUS -- GitLab From 796a83fa039de50133171221ac102a2310e81ffd Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Mon, 21 Dec 2009 21:18:02 -0500 Subject: [PATCH 607/618] USB: musb: correct DMA address for tx Since a DMA transfer may need to be kicked off several times to complete, the DMA start must include the length that has already been transferred. Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index e164999bd364..ac306985a8a1 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -319,7 +319,7 @@ static void txstate(struct musb *musb, struct musb_request *req) use_dma = use_dma && c->channel_program( musb_ep->dma, musb_ep->packet_sz, musb_ep->dma->desired_mode, - request->dma, request_size); + request->dma + request->actual, request_size); if (use_dma) { if (musb_ep->dma->desired_mode == 0) { /* -- GitLab From 0abdc36f066ae20521b8c8d306725dd59a0d50aa Mon Sep 17 00:00:00 2001 From: Maulik Mankad Date: Tue, 22 Dec 2009 16:18:19 +0530 Subject: [PATCH 608/618] USB: musb: Fix null pointer dereference issue This patch fixes the following NULL pointer dereference issue. Pointer 'request' returned from call to function 'next_request' at line 748 may be NULL and may be dereferenced at line 792. ============ Code Snippet ============ 748: request = next_request(musb_ep); 785: if (dma && (csr & MUSB_RXCSR_DMAENAB)) { csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB | MUSB_RXCSR_DMAMODE); musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_P_WZC_BITS | csr); 792: request->actual += musb_ep->dma->actual_len; Signed-off-by: Maulik Mankad Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ac306985a8a1..cbcf14a236e6 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -746,6 +746,8 @@ void musb_g_rx(struct musb *musb, u8 epnum) musb_ep_select(mbase, epnum); request = next_request(musb_ep); + if (!request) + return; csr = musb_readw(epio, MUSB_RXCSR); dma = is_dma_capable() ? musb_ep->dma : NULL; -- GitLab From 0ea52ff44f7a30781881ca2debf35e47b2676171 Mon Sep 17 00:00:00 2001 From: Maulik Mankad Date: Tue, 22 Dec 2009 16:19:53 +0530 Subject: [PATCH 609/618] USB: musb: Fix array index out of bounds issue This patch fixes the below array index out of bounds issue. Buffer overflow, array index of 'aInfo' may be out of bounds. Array 'aInfo' of size 78 may use index value(s) 6..84 The data stored in 'aInfo' array exceeds the array size of 78. This patch increases the size of this array to hold the string correctly without any memory corruption. This issue was reported by Klockwork tool. Signed-off-by: Maulik Mankad Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 24ff09754e0c..5eb9318cff77 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1319,7 +1319,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) #endif u8 reg; char *type; - char aInfo[78], aRevision[32], aDate[12]; + char aInfo[90], aRevision[32], aDate[12]; void __iomem *mbase = musb->mregs; int status = 0; int i; -- GitLab From 1c4bdc01b8a5cf6c54e5eb8bf9a727e38f0176cc Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Mon, 21 Dec 2009 09:49:52 -0500 Subject: [PATCH 610/618] USB: musb: workaround Blackfin FIFO anomalies Some of these workarounds are already in place, but labeled as affecting all BF52x parts. Since we have official anomaly numbers now, use those defines. And since writing to the FIFO has a similar hang issue as reading from the FIFO, implement the workaround there too when necessary. Signed-off-by: Bryan Wu Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/blackfin.c | 134 ++++++++++++++++++++++++------------ drivers/usb/musb/blackfin.h | 2 - 2 files changed, 91 insertions(+), 45 deletions(-) diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index fe4934d9602c..ad26e6569665 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -29,6 +29,8 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) { void __iomem *fifo = hw_ep->fifo; void __iomem *epio = hw_ep->regs; + u8 epnum = hw_ep->epnum; + u16 dma_reg = 0; prefetch((u8 *)src); @@ -39,67 +41,113 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) dump_fifo_data(src, len); - if (unlikely((unsigned long)src & 0x01)) - outsw_8((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); - else - outsw((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); -} + if (!ANOMALY_05000380 && epnum != 0) { + flush_dcache_range((unsigned int)src, + (unsigned int)(src + len)); + + /* Setup DMA address register */ + dma_reg = (u16) ((u32) src & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); + SSYNC(); + + dma_reg = (u16) (((u32) src >> 16) & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); + SSYNC(); + + /* Setup DMA count register */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); + SSYNC(); + + /* Enable the DMA */ + dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION; + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); + SSYNC(); + + /* Wait for compelete */ + while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) + cpu_relax(); + + /* acknowledge dma interrupt */ + bfin_write_USB_DMA_INTERRUPT(1 << epnum); + SSYNC(); + + /* Reset DMA */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); + SSYNC(); + } else { + SSYNC(); + + if (unlikely((unsigned long)src & 0x01)) + outsw_8((unsigned long)fifo, src, + len & 0x01 ? (len >> 1) + 1 : len >> 1); + else + outsw((unsigned long)fifo, src, + len & 0x01 ? (len >> 1) + 1 : len >> 1); + } +} /* * Unload an endpoint's FIFO */ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) { void __iomem *fifo = hw_ep->fifo; - -#ifdef CONFIG_BF52x u8 epnum = hw_ep->epnum; u16 dma_reg = 0; - invalidate_dcache_range((unsigned int)dst, - (unsigned int)(dst + len)); + if (ANOMALY_05000467 && epnum != 0) { - /* Setup DMA address register */ - dma_reg = (u16) ((u32) dst & 0xFFFF); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); - SSYNC(); + invalidate_dcache_range((unsigned int)dst, + (unsigned int)(dst + len)); - dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); - SSYNC(); + /* Setup DMA address register */ + dma_reg = (u16) ((u32) dst & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); + SSYNC(); - /* Setup DMA count register */ - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); - SSYNC(); + dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); + SSYNC(); - /* Enable the DMA */ - dma_reg = (epnum << 4) | DMA_ENA | INT_ENA; - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); - SSYNC(); + /* Setup DMA count register */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); + SSYNC(); - /* Wait for compelete */ - while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) - cpu_relax(); + /* Enable the DMA */ + dma_reg = (epnum << 4) | DMA_ENA | INT_ENA; + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); + SSYNC(); - /* acknowledge dma interrupt */ - bfin_write_USB_DMA_INTERRUPT(1 << epnum); - SSYNC(); + /* Wait for compelete */ + while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) + cpu_relax(); - /* Reset DMA */ - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); - SSYNC(); -#else - if (unlikely((unsigned long)dst & 0x01)) - insw_8((unsigned long)fifo, dst, - len & 0x01 ? (len >> 1) + 1 : len >> 1); - else - insw((unsigned long)fifo, dst, - len & 0x01 ? (len >> 1) + 1 : len >> 1); -#endif + /* acknowledge dma interrupt */ + bfin_write_USB_DMA_INTERRUPT(1 << epnum); + SSYNC(); + /* Reset DMA */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); + SSYNC(); + } else { + SSYNC(); + /* Read the last byte of packet with odd size from address fifo + 4 + * to trigger 1 byte access to EP0 FIFO. + */ + if (len == 1) + *dst = (u8)inw((unsigned long)fifo + 4); + else { + if (unlikely((unsigned long)dst & 0x01)) + insw_8((unsigned long)fifo, dst, len >> 1); + else + insw((unsigned long)fifo, dst, len >> 1); + + if (len & 0x01) + *(dst + len - 1) = (u8)inw((unsigned long)fifo + 4); + } + } DBG(4, "%cX ep%d fifo %p count %d buf %p\n", 'R', hw_ep->epnum, fifo, len, dst); diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h index 10b7d7584f4b..bd9352a2ef2a 100644 --- a/drivers/usb/musb/blackfin.h +++ b/drivers/usb/musb/blackfin.h @@ -69,7 +69,6 @@ static void dump_fifo_data(u8 *buf, u16 len) #define dump_fifo_data(buf, len) do {} while (0) #endif -#ifdef CONFIG_BF52x #define USB_DMA_BASE USB_DMA_INTERRUPT #define USB_DMAx_CTRL 0x04 @@ -79,7 +78,6 @@ static void dump_fifo_data(u8 *buf, u16 len) #define USB_DMAx_COUNT_HIGH 0x14 #define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg) -#endif /* Almost 1 second */ #define TIMER_DELAY (1 * HZ) -- GitLab From 465f8294eea1ea206e3a008e7bfe0e8fd53991fc Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Dec 2009 23:19:52 +0200 Subject: [PATCH 611/618] usb: otg: isp1301_omap: fix compile error commit 91c8a5a9985d5bf9c55f6f82f183f57b050b2a3a broke compilation of this driver after it introduced otg_init() as a static inline in Reported-by: Tony Lindgren Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/isp1301_omap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index d54460a88173..78a209709260 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -843,7 +843,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp) static struct platform_device *otg_dev; -static int otg_init(struct isp1301 *isp) +static int isp1301_otg_init(struct isp1301 *isp) { u32 l; @@ -1275,7 +1275,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c) static int isp1301_otg_enable(struct isp1301 *isp) { power_up(isp); - otg_init(isp); + isp1301_otg_init(isp); /* NOTE: since we don't change this, this provides * a few more interrupts than are strictly needed. -- GitLab From d16f172622a7941c4fca09724ce16df5348af5fb Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Wed, 9 Dec 2009 22:21:12 -0500 Subject: [PATCH 612/618] USB: audio gadget: fix wTotalLength calculation The wTotalLength should contain the sum of the interface and unit descriptor sizes per the Audio Device Class specification 1.0. Reported-by: Sergey Lapin Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_audio.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index 0f2eee12ee9f..1ff420b7d72f 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -56,13 +56,16 @@ static struct usb_interface_descriptor ac_interface_desc __initdata = { DECLARE_UAC_AC_HEADER_DESCRIPTOR(2); #define UAC_DT_AC_HEADER_LENGTH UAC_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES) +/* 1 input terminal, 1 output terminal and 1 feature unit */ +#define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \ + + UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0)) /* B.3.2 Class-Specific AC Interface Descriptor */ static struct uac_ac_header_descriptor_2 ac_header_desc = { .bLength = UAC_DT_AC_HEADER_LENGTH, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_HEADER, .bcdADC = __constant_cpu_to_le16(0x0100), - .wTotalLength = __constant_cpu_to_le16(UAC_DT_AC_HEADER_LENGTH), + .wTotalLength = __constant_cpu_to_le16(UAC_DT_TOTAL_LENGTH), .bInCollection = F_AUDIO_NUM_INTERFACES, .baInterfaceNr = { [0] = F_AUDIO_AC_INTERFACE, -- GitLab From feef1d952ee1e9ac074640d7029dbbe8501725c2 Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Wed, 9 Dec 2009 22:28:39 -0500 Subject: [PATCH 613/618] USB: audio gadget: free alsa devices when unloading Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/audio.c | 1 + drivers/usb/gadget/f_audio.c | 2 +- drivers/usb/gadget/u_audio.c | 12 +++++++++--- drivers/usb/gadget/u_audio.h | 2 +- 4 files changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c index 58f220323847..a62af7b59094 100644 --- a/drivers/usb/gadget/audio.c +++ b/drivers/usb/gadget/audio.c @@ -158,6 +158,7 @@ static int __init audio_bind(struct usb_composite_dev *cdev) static int __exit audio_unbind(struct usb_composite_dev *cdev) { + gaudio_cleanup(); return 0; } diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index 1ff420b7d72f..df77f6131c73 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -792,7 +792,7 @@ int __init audio_bind_config(struct usb_configuration *c) return status; add_fail: - gaudio_cleanup(&audio->card); + gaudio_cleanup(); setup_fail: kfree(audio); return status; diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c index 8252595d619d..35e0930f5bbb 100644 --- a/drivers/usb/gadget/u_audio.c +++ b/drivers/usb/gadget/u_audio.c @@ -288,6 +288,7 @@ static int gaudio_close_snd_dev(struct gaudio *gau) return 0; } +static struct gaudio *the_card; /** * gaudio_setup - setup ALSA interface and preparing for USB transfer * @@ -303,6 +304,9 @@ int __init gaudio_setup(struct gaudio *card) if (ret) ERROR(card, "we need at least one control device\n"); + if (!the_card) + the_card = card; + return ret; } @@ -312,9 +316,11 @@ int __init gaudio_setup(struct gaudio *card) * * This is called to free all resources allocated by @gaudio_setup(). */ -void gaudio_cleanup(struct gaudio *card) +void gaudio_cleanup(void) { - if (card) - gaudio_close_snd_dev(card); + if (the_card) { + gaudio_close_snd_dev(the_card); + the_card = NULL; + } } diff --git a/drivers/usb/gadget/u_audio.h b/drivers/usb/gadget/u_audio.h index cc8d159c648a..08ffce3298e6 100644 --- a/drivers/usb/gadget/u_audio.h +++ b/drivers/usb/gadget/u_audio.h @@ -51,6 +51,6 @@ struct gaudio { }; int gaudio_setup(struct gaudio *card); -void gaudio_cleanup(struct gaudio *card); +void gaudio_cleanup(void); #endif /* __U_AUDIO_H */ -- GitLab From c983202bd03eb82394ef1dce5906702fcbc7bb80 Mon Sep 17 00:00:00 2001 From: Donny Kurnia Date: Wed, 23 Dec 2009 19:03:12 +0700 Subject: [PATCH 614/618] USB: option: support hi speed for modem Haier CE100 I made this patch for usbserial driver to add the support for EVDO modem Haier CE100. The bugs report for this is here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/490068 This patch based on these post: http://blankblondtank.wordpress.com/2009/09/04/mengoptimalkan-koneksi-modem-haier-ce-100-cdma-di-linux/ http://tantos.web.id/blogs/how-to-internet-connection-using-cdma-evdo-modem-and-karmic-koala-ubuntu-9-10 I hope this patch can help other that have the Haier C100 modem, mostly in my country, Indonesia. Signed-off-by: Donny Kurnia Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9a2b903492ec..6e94a6711f08 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -340,6 +340,10 @@ static int option_resume(struct usb_serial *serial); #define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 +/* Haier products */ +#define HAIER_VENDOR_ID 0x201e +#define HAIER_PRODUCT_CE100 0x2009 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -641,6 +645,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) }, + { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- GitLab From 37e9066b2f85480d99d3795373f5ef0b00ac1189 Mon Sep 17 00:00:00 2001 From: pancho horrillo Date: Wed, 23 Dec 2009 11:09:13 +0100 Subject: [PATCH 615/618] USB: Fix a bug on appledisplay.c regarding signedness brightness status is reported by the Apple Cinema Displays as an 'unsigned char' (u8) value, but the code used 'char' instead. Note that he driver was developed on the PowerPC architecture, where the two types are synonymous, which is not always the case. Fixed that. Otherwise the driver will interpret brightness levels > 127 as negative, and fail to load. Signed-off-by: pancho horrillo Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/appledisplay.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 8dc4afa38b87..1eb9e4162cc6 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -73,8 +73,8 @@ struct appledisplay { struct usb_device *udev; /* usb device */ struct urb *urb; /* usb request block */ struct backlight_device *bd; /* backlight device */ - char *urbdata; /* interrupt URB data buffer */ - char *msgdata; /* control message data buffer */ + u8 *urbdata; /* interrupt URB data buffer */ + u8 *msgdata; /* control message data buffer */ struct delayed_work work; int button_pressed; -- GitLab From 2f99f5c8f05e02f3df1bb4d93b6704e6f5972872 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 23 Dec 2009 15:04:53 -0800 Subject: [PATCH 616/618] Revert "x86, ucode-amd: Ensure ucode update on suspend/resume after CPU off/online cycle" This reverts commit 9f15226e75583547aaf542c6be4bdac1060dd425. It's just wrong, and broke resume for Rafael even on a non-AMD CPU. As Rafael says: "... it causes microcode_init_cpu() to be called during resume even for CPUs for which there's no microcode to apply. That, in turn, results in executing request_firmware() (on Intel CPUs at least) which doesn't work at this stage of resume (we have device interrupts disabled, I/O devices are still suspended and so on). If I'm not mistaken, the "if (uci->valid)" logic means "if that CPU is known to us" , so before commit 9f15226e755 microcode_resume_cpu() was called for all CPUs already in the system during suspend, which was the right thing to do. The commit changed it so that the CPUs without microcode to apply are now treated as "unknown", which is not quite right. The problem this commit attempted to solve has to be handled differently." Bisected-and -requested-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- arch/x86/kernel/microcode_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 844c02c65fcb..0c8632433090 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -394,7 +394,7 @@ static enum ucode_state microcode_update_cpu(int cpu) struct ucode_cpu_info *uci = ucode_cpu_info + cpu; enum ucode_state ustate; - if (uci->valid && uci->mc) + if (uci->valid) ustate = microcode_resume_cpu(cpu); else ustate = microcode_init_cpu(cpu); -- GitLab From 154280fd0e890814a249bf4a79b4340fb367f1a7 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Dec 2009 03:37:28 +0000 Subject: [PATCH 617/618] serial: sh-sci: earlyprintk zero uartclk fix This establishes a sensible max baud rate for the earlyprintk cases where the port's uartclk has not yet been determined. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 68c7f6cfd728..a88699051136 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -897,11 +897,21 @@ static void sci_shutdown(struct uart_port *port) static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - unsigned int status, baud, smr_val; + unsigned int status, baud, smr_val, max_baud; int t = -1; - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - if (likely(baud)) + /* + * earlyprintk comes here early on with port->uartclk set to zero. + * the clock framework is not up and running at this point so here + * we assume that 115200 is the maximum baud rate. please note that + * the baud rate is not programmed during earlyprintk - it is assumed + * that the previous boot loader has enabled required clocks and + * setup the baud rate generator hardware for us already. + */ + max_baud = port->uartclk ? port->uartclk / 16 : 115200; + + baud = uart_get_baud_rate(port, termios, old, 0, max_baud); + if (likely(baud && port->uartclk)) t = SCBRR_VALUE(baud, port->uartclk); do { -- GitLab From 32b53076c31ce9159740b744d5eb5d9505312add Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 24 Dec 2009 14:52:43 +0900 Subject: [PATCH 618/618] serial: sh-sci: Convert tremaining ctrl_xxx I/O routines to __raw_xxx. ctrl_xxx() is an antiquated SH interface, while __raw_xxx is the standard API that accomplishes the same thing. As such, this converts the remaining sh-sci straggles over, which enables the driver to be wired up for ARM SH-Mobile CPUs as well. Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 4 +- drivers/serial/sh-sci.h | 118 ++++++++++++++++++++-------------------- 2 files changed, 61 insertions(+), 61 deletions(-) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index a88699051136..37f0de9dd9ce 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -222,9 +222,9 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) Set SCP6MD1,0 = {01} (output) */ __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); - data = ctrl_inb(SCPDR); + data = __raw_readb(SCPDR); /* Set /RTS2 (bit6) = 0 */ - ctrl_outb(data & 0xbf, SCPDR); + __raw_writeb(data & 0xbf, SCPDR); } } #elif defined(CONFIG_CPU_SUBTYPE_SH7722) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index a32094eeb42b..0efcded59ae6 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -517,20 +517,20 @@ static const struct __attribute__((packed)) { static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffffe80) - return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */ + return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ if (port->mapbase == 0xa4000150) - return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ + return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xa4000140) - return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ + return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7705) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == SCIF0) - return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ + return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ if (port->mapbase == SCIF2) - return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ + return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) @@ -557,68 +557,68 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ + return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ if (port->mapbase == 0xffe80000) - return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe80000) - return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7757) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfe4b0000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; if (port->mapbase == 0xfe4c0000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; if (port->mapbase == 0xfe4d0000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; } #elif defined(CONFIG_CPU_SUBTYPE_SH7760) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfe600000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfe610000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfe620000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7343) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe20000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe30000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7366) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ + return __raw_readb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7722) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */ + return __raw_readb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */ if (port->mapbase == 0xffe10000) - return ctrl_inb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */ + return __raw_readb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */ if (port->mapbase == 0xffe20000) - return ctrl_inb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */ + return __raw_readb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */ return 1; } @@ -626,17 +626,17 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */ + return __raw_readb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */ if (port->mapbase == 0xffe10000) - return ctrl_inb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */ + return __raw_readb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */ if (port->mapbase == 0xffe20000) - return ctrl_inb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */ + return __raw_readb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */ if (port->mapbase == 0xa4e30000) - return ctrl_inb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */ + return __raw_readb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */ if (port->mapbase == 0xa4e40000) - return ctrl_inb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */ + return __raw_readb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */ if (port->mapbase == 0xa4e50000) - return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ + return __raw_readb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7724) @@ -645,9 +645,9 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->type == PORT_SCIF) - return ctrl_inw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; + return __raw_readw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; if (port->type == PORT_SCIFA) - return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; + return __raw_readw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) @@ -665,11 +665,11 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe08000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ return 1; } @@ -677,20 +677,20 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xff923000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xff924000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xff925000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7780) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ @@ -698,17 +698,17 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffea0000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffeb0000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffec0000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffed0000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffee0000) - return ctrl_inw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffef0000) - return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ @@ -718,22 +718,22 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffe8000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe8800) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe9000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe9800) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ #if defined(CONFIG_CPU_SUBTYPE_SH7201) if (port->mapbase == 0xfffeA000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeA800) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeB000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeB800) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ #endif return 1; } @@ -741,24 +741,24 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xf8400000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xf8410000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xf8420000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SHX3) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffc30000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc40000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc50000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc60000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #endif -- GitLab