diff --git a/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads b/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads new file mode 100644 index 0000000000000000000000000000000000000000..b0b0eeb20fe342907cf2e7f9480a2da038ff3043 --- /dev/null +++ b/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads @@ -0,0 +1,5 @@ +What: /proc/sys/vm/nr_pdflush_threads +Date: June 2012 +Contact: Wanpeng Li +Description: Since pdflush is replaced by per-BDI flusher, the interface of old pdflush + exported in /proc/sys/vm/ should be removed. diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 34f51100f0299cb5a96a77984def99dbfdd9367d..dff1f48d252d8f0d36aa31cccf6514cb02b3d333 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -210,3 +210,15 @@ Users: firmware assigned instance number of the PCI device that can help in understanding the firmware intended order of the PCI device. + +What: /sys/bus/pci/devices/.../d3cold_allowed +Date: July 2012 +Contact: Huang Ying +Description: + d3cold_allowed is bit to control whether the corresponding PCI + device can be put into D3Cold state. If it is cleared, the + device will never be put into D3Cold state. If it is set, the + device may be put into D3Cold state if other requirements are + satisfied too. Reading this attribute will show the current + value of d3cold_allowed bit. Writing this attribute will set + the value of d3cold_allowed bit. diff --git a/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb b/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb new file mode 100644 index 0000000000000000000000000000000000000000..2107082426daf2f5076d7bb851a6dcca189484d9 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb @@ -0,0 +1,44 @@ +What: /sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_alpha +Date: May 2012 +Contact: Laurent Pinchart +Description: + This file is only available on fb[0-9] devices corresponding + to overlay planes. + + Stores the alpha blending value for the overlay. Values range + from 0 (transparent) to 255 (opaque). The value is ignored if + the mode is not set to Alpha Blending. + +What: /sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_mode +Date: May 2012 +Contact: Laurent Pinchart +Description: + This file is only available on fb[0-9] devices corresponding + to overlay planes. + + Selects the composition mode for the overlay. Possible values + are + + 0 - Alpha Blending + 1 - ROP3 + +What: /sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_position +Date: May 2012 +Contact: Laurent Pinchart +Description: + This file is only available on fb[0-9] devices corresponding + to overlay planes. + + Stores the x,y overlay position on the display in pixels. The + position format is `[0-9]+,[0-9]+'. + +What: /sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_rop3 +Date: May 2012 +Contact: Laurent Pinchart +Description: + This file is only available on fb[0-9] devices corresponding + to overlay planes. + + Stores the raster operation (ROP3) for the overlay. Values + range from 0 to 255. The value is ignored if the mode is not + set to ROP3. diff --git a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop index 814b01354c414caf71337d115b41fc92c89769b8..b31e782bd9850628f77f683ba0f87a5ab6d169ae 100644 --- a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop +++ b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop @@ -5,4 +5,15 @@ Contact: "Ike Panhc " Description: Control the power of camera module. 1 means on, 0 means off. +What: /sys/devices/platform/ideapad/fan_mode +Date: June 2012 +KernelVersion: 3.6 +Contact: "Maxim Mikityanskiy " +Description: + Change fan mode + There are four available modes: + * 0 -> Super Silent Mode + * 1 -> Standard Mode + * 2 -> Dust Cleaning + * 4 -> Efficient Thermal Dissipation Mode diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl index 3fca32c41927130dae636a93504d7d8aacdee90e..25b58efd955dd2bebf2d716aea851fe283f792c1 100644 --- a/Documentation/DocBook/filesystems.tmpl +++ b/Documentation/DocBook/filesystems.tmpl @@ -224,8 +224,8 @@ all your transactions. -Then at umount time , in your put_super() (2.4) or write_super() (2.5) -you can then call journal_destroy() to clean up your in-core journal object. +Then at umount time , in your put_super() you can then call journal_destroy() +to clean up your in-core journal object. diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile index 362520992ced54497deb8dca8b6fa4a60bd61125..9b7e4c55792803b1c053bc99026860a5ce56e88d 100644 --- a/Documentation/DocBook/media/Makefile +++ b/Documentation/DocBook/media/Makefile @@ -300,7 +300,7 @@ $(MEDIA_OBJ_DIR)/media-entities.tmpl: $(MEDIA_OBJ_DIR)/v4l2.xml @( \ for ident in $(IOCTLS) ; do \ entity=`echo $$ident | tr _ -` ; \ - id=`grep "$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \ + id=`grep "$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml $(MEDIA_OBJ_DIR)/media-ioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \ echo "$$ident\">" \ >>$@ ; \ diff --git a/Documentation/DocBook/media/dvb/audio.xml b/Documentation/DocBook/media/dvb/audio.xml index d64386237207a9f27867fd6e9bee02620ff4c8bb..a7ea56c71a27cc5cebcfd6ea91b8d17dfa9432c4 100644 --- a/Documentation/DocBook/media/dvb/audio.xml +++ b/Documentation/DocBook/media/dvb/audio.xml @@ -1,12 +1,16 @@ DVB Audio Device The DVB audio device controls the MPEG2 audio decoder of the DVB hardware. It can be accessed through /dev/dvb/adapter0/audio0. Data types and and -ioctl definitions can be accessed by including linux/dvb/video.h in your +ioctl definitions can be accessed by including linux/dvb/audio.h in your application. Please note that some DVB cards don’t have their own MPEG decoder, which results in the omission of the audio and video device. + +These ioctls were also used by V4L2 to control MPEG decoders implemented in V4L2. The use +of these ioctls for that purpose has been made obsolete and proper V4L2 ioctls or controls +have been created to replace that functionality.
Audio Data Types @@ -558,6 +562,8 @@ role="subsection">AUDIO_SELECT_SOURCE role="subsection">AUDIO_SET_MUTE DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; with the V4L2_DEC_CMD_START_MUTE_AUDIO flag instead. This ioctl call asks the audio device to mute the stream that is currently being @@ -730,6 +736,8 @@ role="subsection">AUDIO_SET_BYPASS_MODE role="subsection">AUDIO_CHANNEL_SELECT DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK control instead. This ioctl call asks the Audio Device to select the requested channel if possible. @@ -772,6 +780,109 @@ role="subsection">AUDIO_CHANNEL_SELECT &return-value-dvb; +
AUDIO_BILINGUAL_CHANNEL_SELECT +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. It has been replaced by +the V4L2 V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK control +for MPEG decoders controlled through V4L2. + +This ioctl call asks the Audio Device to select the requested channel for bilingual streams if possible. + + +SYNOPSIS + + +int ioctl(int fd, int request = + AUDIO_BILINGUAL_CHANNEL_SELECT, audio_channel_select_t); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_BILINGUAL_CHANNEL_SELECT for this + command. + + +audio_channel_select_t +ch + +Select the output format of the audio (mono left/right, + stereo). + + + +&return-value-dvb; + +
AUDIO_GET_PTS +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. If you need this functionality, +then please contact the linux-media mailing list (&v4l-ml;). + +This ioctl call asks the Audio Device to return the current PTS timestamp. + + +SYNOPSIS + + +int ioctl(int fd, int request = + AUDIO_GET_PTS, __u64 *pts); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_GET_PTS for this + command. + + +__u64 *pts + + +Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / ISO/IEC 13818-1. + + +The PTS should belong to the currently played +frame if possible, but may also be a value close to it +like the PTS of the last decoded frame or the last PTS +extracted by the PES parser. + + +&return-value-dvb; +
AUDIO_GET_STATUS DESCRIPTION diff --git a/Documentation/DocBook/media/dvb/ca.xml b/Documentation/DocBook/media/dvb/ca.xml index 5c4adb44b1c18a4207ac993132e823c83cac6624..85eaf4fe2931fc96cea50ba2d502a401d475c22c 100644 --- a/Documentation/DocBook/media/dvb/ca.xml +++ b/Documentation/DocBook/media/dvb/ca.xml @@ -226,4 +226,357 @@ typedef struct ca_pid {
+ +
CA_RESET +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_RESET); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_RESET for this command. + + +&return-value-dvb; +
+ +
CA_GET_CAP +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_GET_CAP, + ca_caps_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_GET_CAP for this command. + + +ca_caps_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_GET_SLOT_INFO +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_GET_SLOT_INFO, + ca_slot_info_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_GET_SLOT_INFO for this command. + + +ca_slot_info_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_GET_DESCR_INFO +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_GET_DESCR_INFO, + ca_descr_info_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_GET_DESCR_INFO for this command. + + +ca_descr_info_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_GET_MSG +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_GET_MSG, + ca_msg_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_GET_MSG for this command. + + +ca_msg_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_SEND_MSG +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_SEND_MSG, + ca_msg_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_SEND_MSG for this command. + + +ca_msg_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_SET_DESCR +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_SET_DESCR, + ca_descr_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_SET_DESCR for this command. + + +ca_descr_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_SET_PID +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_SET_PID, + ca_pid_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_SET_PID for this command. + + +ca_pid_t * + + +Undocumented. + + +&return-value-dvb; +
+ diff --git a/Documentation/DocBook/media/dvb/demux.xml b/Documentation/DocBook/media/dvb/demux.xml index 37c17908aa400acd225881af1acb5383e6221442..86de89cfbd676cbeda054aba040432e25c4f68d3 100644 --- a/Documentation/DocBook/media/dvb/demux.xml +++ b/Documentation/DocBook/media/dvb/demux.xml @@ -899,4 +899,232 @@ typedef enum { Invalid stc number. - + + +
DMX_GET_PES_PIDS +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_GET_PES_PIDS, + __u16[5]); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_GET_PES_PIDS for this command. + + +__u16[5] + + +Undocumented. + + +&return-value-dvb; +
+ +
DMX_GET_CAPS +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_GET_CAPS, + dmx_caps_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_GET_CAPS for this command. + + +dmx_caps_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
DMX_SET_SOURCE +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_SET_SOURCE, + dmx_source_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_SET_SOURCE for this command. + + +dmx_source_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
DMX_ADD_PID +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_ADD_PID, + __u16 *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_ADD_PID for this command. + + +__u16 * + + +Undocumented. + + +&return-value-dvb; +
+ +
DMX_REMOVE_PID +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_REMOVE_PID, + __u16 *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_REMOVE_PID for this command. + + +__u16 * + + +Undocumented. + + +&return-value-dvb; +
+ + + diff --git a/Documentation/DocBook/media/dvb/dvbapi.xml b/Documentation/DocBook/media/dvb/dvbapi.xml index 2ab6ddcfc4e095dada4e2e6eb8084003096c279a..757488b24f4f2518898f13f55de57e9d708fa575 100644 --- a/Documentation/DocBook/media/dvb/dvbapi.xml +++ b/Documentation/DocBook/media/dvb/dvbapi.xml @@ -28,7 +28,7 @@ Convergence GmbH - 2009-2011 + 2009-2012 Mauro Carvalho Chehab @@ -84,7 +84,7 @@ Added ISDB-T test originally written by Patrick Boettcher LINUX DVB API -Version 5.2 +Version 5.8 &sub-intro; diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index e633c097a8d14b954975743e67816867f5b9fdaa..957e3acaae8e9c7e0cbc6ee377885c53d2b298d1 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -194,6 +194,7 @@ get/set up to 64 properties. The actual meaning of each property is described on APSK_16, APSK_32, DQPSK, + QAM_4_NR, } fe_modulation_t; @@ -265,6 +266,7 @@ typedef enum fe_code_rate { FEC_AUTO, FEC_3_5, FEC_9_10, + FEC_2_5, } fe_code_rate_t; which correspond to error correction rates of 1/2, 2/3, etc., @@ -351,7 +353,7 @@ typedef enum fe_delivery_system { SYS_ISDBC, SYS_ATSC, SYS_ATSCMH, - SYS_DMBTH, + SYS_DTMB, SYS_CMMB, SYS_DAB, SYS_DVBT2, @@ -567,28 +569,33 @@ typedef enum fe_delivery_system { <constant>DTV_ATSCMH_RS_FRAME_MODE</constant> RS frame mode. Possible values are: + typedef enum atscmh_rs_frame_mode { ATSCMH_RSFRAME_PRI_ONLY = 0, ATSCMH_RSFRAME_PRI_SEC = 1, } atscmh_rs_frame_mode_t; +
<constant>DTV_ATSCMH_RS_FRAME_ENSEMBLE</constant> RS frame ensemble. Possible values are: + typedef enum atscmh_rs_frame_ensemble { ATSCMH_RSFRAME_ENS_PRI = 0, ATSCMH_RSFRAME_ENS_SEC = 1, } atscmh_rs_frame_ensemble_t; +
<constant>DTV_ATSCMH_RS_CODE_MODE_PRI</constant> RS code mode (primary). Possible values are: + typedef enum atscmh_rs_code_mode { ATSCMH_RSCODE_211_187 = 0, @@ -596,6 +603,7 @@ typedef enum atscmh_rs_code_mode { ATSCMH_RSCODE_235_187 = 2, } atscmh_rs_code_mode_t; +
<constant>DTV_ATSCMH_RS_CODE_MODE_SEC</constant> @@ -613,23 +621,27 @@ typedef enum atscmh_rs_code_mode { <constant>DTV_ATSCMH_SCCC_BLOCK_MODE</constant> Series Concatenated Convolutional Code Block Mode. Possible values are: + typedef enum atscmh_sccc_block_mode { ATSCMH_SCCC_BLK_SEP = 0, ATSCMH_SCCC_BLK_COMB = 1, } atscmh_sccc_block_mode_t; +
<constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant> Series Concatenated Convolutional Code Rate. Possible values are: + typedef enum atscmh_sccc_code_mode { ATSCMH_SCCC_CODE_HLF = 0, ATSCMH_SCCC_CODE_QTR = 1, } atscmh_sccc_code_mode_t; +
<constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant> @@ -725,6 +737,9 @@ typedef enum fe_guard_interval { GUARD_INTERVAL_1_128, GUARD_INTERVAL_19_128, GUARD_INTERVAL_19_256, + GUARD_INTERVAL_PN420, + GUARD_INTERVAL_PN595, + GUARD_INTERVAL_PN945, } fe_guard_interval_t; @@ -733,6 +748,7 @@ typedef enum fe_guard_interval { try to find the correct guard interval (if capable) and will use TMCC to fill in the missing parameters. 2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present + 3) DTMB specifies PN420, PN595 and PN945.
<constant>DTV_TRANSMISSION_MODE</constant> @@ -749,6 +765,8 @@ typedef enum fe_transmit_mode { TRANSMISSION_MODE_1K, TRANSMISSION_MODE_16K, TRANSMISSION_MODE_32K, + TRANSMISSION_MODE_C1, + TRANSMISSION_MODE_C3780, } fe_transmit_mode_t; Notes: @@ -760,6 +778,7 @@ typedef enum fe_transmit_mode { use TMCC to fill in the missing parameters. 3) DVB-T specifies 2K and 8K as valid sizes. 4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K. + 5) DTMB specifies C1 and C3780.
<constant>DTV_HIERARCHY</constant> @@ -774,17 +793,28 @@ typedef enum fe_hierarchy { } fe_hierarchy_t;
-
- <constant>DTV_ISDBS_TS_ID</constant> - Currently unused. +
+ <constant>DTV_STREAM_ID</constant> + DVB-S2, DVB-T2 and ISDB-S support the transmission of several + streams on a single transport stream. + This property enables the DVB driver to handle substream filtering, + when supported by the hardware. + By default, substream filtering is disabled. + + For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255. + + For ISDB, the valid substream id range is from 1 to 65535. + + To disable it, you should use the special macro NO_STREAM_ID_FILTER. + + Note: any value outside the id range also disables filtering. +
-
- <constant>DTV_DVBT2_PLP_ID</constant> - DVB-T2 supports Physical Layer Pipes (PLP) to allow transmission of - many data types via a single multiplex. The API will soon support this - at which point this section will be expanded. +
+ <constant>DTV_DVBT2_PLP_ID_LEGACY</constant> + Obsolete, replaced with DTV_STREAM_ID.
-
+
<constant>DTV_ENUM_DELSYS</constant> A Multi standard frontend needs to advertise the delivery systems provided. Applications need to enumerate the provided delivery systems, before using @@ -796,6 +826,29 @@ typedef enum fe_hierarchy { FE_GET_INFO. In the case of a legacy frontend, the result is just the same as with FE_GET_INFO, but in a more structured format
+
+ <constant>DTV_INTERLEAVING</constant> + Interleaving mode + +enum fe_interleaving { + INTERLEAVING_NONE, + INTERLEAVING_AUTO, + INTERLEAVING_240, + INTERLEAVING_720, +}; + +
+
+ <constant>DTV_LNA</constant> + Low-noise amplifier. + Hardware might offer controllable LNA which can be set manually + using that parameter. Usually LNA could be found only from + terrestrial devices if at all. + Possible values: 0, 1, LNA_AUTO + 0, LNA off + 1, LNA on + use the special macro LNA_AUTO to set LNA auto +
Properties used on terrestrial delivery systems @@ -816,6 +869,7 @@ typedef enum fe_hierarchy { DTV_GUARD_INTERVAL DTV_TRANSMISSION_MODE DTV_HIERARCHY + DTV_LNA
@@ -838,7 +892,8 @@ typedef enum fe_hierarchy { DTV_GUARD_INTERVAL DTV_TRANSMISSION_MODE DTV_HIERARCHY - DTV_DVBT2_PLP_ID + DTV_STREAM_ID + DTV_LNA
@@ -925,13 +980,32 @@ typedef enum fe_hierarchy { DTV_ATSCMH_PRC DTV_ATSCMH_RS_FRAME_MODE DTV_ATSCMH_RS_FRAME_ENSEMBLE - DTV_ATSCMH_CODE_MODE_PRI - DTV_ATSCMH_CODE_MODE_SEC + DTV_ATSCMH_RS_CODE_MODE_PRI + DTV_ATSCMH_RS_CODE_MODE_SEC DTV_ATSCMH_SCCC_BLOCK_MODE - DTV_ATSCMH_SCCC_CODE_MODE_A - DTV_ATSCMH_SCCC_CODE_MODE_B - DTV_ATSCMH_SCCC_CODE_MODE_C - DTV_ATSCMH_SCCC_CODE_MODE_D + DTV_ATSCMH_SCCC_CODE_MODE_A + DTV_ATSCMH_SCCC_CODE_MODE_B + DTV_ATSCMH_SCCC_CODE_MODE_C + DTV_ATSCMH_SCCC_CODE_MODE_D + +
+
+ DTMB delivery system + The following parameters are valid for DTMB: + + DTV_API_VERSION + DTV_DELIVERY_SYSTEM + DTV_TUNE + DTV_CLEAR + DTV_FREQUENCY + DTV_MODULATION + DTV_BANDWIDTH_HZ + DTV_INVERSION + DTV_INNER_FEC + DTV_GUARD_INTERVAL + DTV_TRANSMISSION_MODE + DTV_INTERLEAVING + DTV_LNA
@@ -952,6 +1026,7 @@ typedef enum fe_hierarchy { DTV_INVERSION DTV_SYMBOL_RATE DTV_INNER_FEC + DTV_LNA
@@ -966,6 +1041,7 @@ typedef enum fe_hierarchy { DTV_FREQUENCY DTV_MODULATION DTV_INVERSION + DTV_LNA
@@ -999,6 +1075,7 @@ typedef enum fe_hierarchy { DTV_MODULATION DTV_PILOT DTV_ROLLOFF + DTV_STREAM_ID
@@ -1021,7 +1098,7 @@ typedef enum fe_hierarchy { DTV_SYMBOL_RATE DTV_INNER_FEC DTV_VOLTAGE - DTV_ISDBS_TS_ID + DTV_STREAM_ID
diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml index aeaed59d0f1f5d3d9baeff4af53eb803a7b50355..426c2526a4546a5fcf8ec27561d14482fa91593e 100644 --- a/Documentation/DocBook/media/dvb/frontend.xml +++ b/Documentation/DocBook/media/dvb/frontend.xml @@ -66,7 +66,7 @@ supported via the new FE_GET_PROPERTY/FE_GET The usage of this field is deprecated, as it doesn't report all supported standards, and will provide an incomplete information for frontends that support multiple delivery systems. -Please use DTV_ENUM_DELSYS instead. +Please use DTV_ENUM_DELSYS instead.
@@ -101,6 +101,7 @@ a specific frontend type. FE_CAN_8VSB = 0x200000, FE_CAN_16VSB = 0x400000, FE_HAS_EXTENDED_CAPS = 0x800000, + FE_CAN_MULTISTREAM = 0x4000000, FE_CAN_TURBO_FEC = 0x8000000, FE_CAN_2G_MODULATION = 0x10000000, FE_NEEDS_BENDING = 0x20000000, @@ -207,18 +208,44 @@ spec. Several functions of the frontend device use the fe_status data type defined by - typedef enum fe_status { - FE_HAS_SIGNAL = 0x01, /⋆ found something above the noise level ⋆/ - FE_HAS_CARRIER = 0x02, /⋆ found a DVB signal ⋆/ - FE_HAS_VITERBI = 0x04, /⋆ FEC is stable ⋆/ - FE_HAS_SYNC = 0x08, /⋆ found sync bytes ⋆/ - FE_HAS_LOCK = 0x10, /⋆ everything's working... ⋆/ - FE_TIMEDOUT = 0x20, /⋆ no lock within the last ~2 seconds ⋆/ - FE_REINIT = 0x40 /⋆ frontend was reinitialized, ⋆/ - } fe_status_t; /⋆ application is recommned to reset ⋆/ +typedef enum fe_status { + FE_HAS_SIGNAL = 0x01, + FE_HAS_CARRIER = 0x02, + FE_HAS_VITERBI = 0x04, + FE_HAS_SYNC = 0x08, + FE_HAS_LOCK = 0x10, + FE_TIMEDOUT = 0x20, + FE_REINIT = 0x40, +} fe_status_t; -to indicate the current state and/or state changes of the frontend hardware. - +to indicate the current state and/or state changes of the frontend hardware: + + + + +FE_HAS_SIGNAL +The frontend has found something above the noise level + +FE_HAS_CARRIER +The frontend has found a DVB signal + +FE_HAS_VITERBI +The frontend FEC code is stable + +FE_HAS_SYNC +Syncronization bytes was found + +FE_HAS_LOCK +The DVB were locked and everything is working + +FE_TIMEDOUT +no lock within the last about 2 seconds + +FE_REINIT +The frontend was reinitialized, application is +recommended to reset DiSEqC, tone and parameters + +
@@ -238,7 +265,7 @@ and to add newer delivery systems. FE_GET_PROPERTY/FE_SET_PROPERTY instead, in order to be able to support the newer System Delivery like DVB-S2, DVB-T2, DVB-C2, ISDB, etc. -All kinds of parameters are combined as an union in the FrontendParameters structure: +All kinds of parameters are combined as an union in the FrontendParameters structure: struct dvb_frontend_parameters { uint32_t frequency; /⋆ (absolute) frequency in Hz for QAM/OFDM ⋆/ @@ -251,12 +278,13 @@ struct dvb_frontend_parameters { struct dvb_vsb_parameters vsb; } u; }; - + In the case of QPSK frontends the frequency field specifies the intermediate frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and OFDM frontends the frequency specifies the absolute frequency and is given in Hz. +
QPSK parameters For satellite QPSK frontends you have to use the dvb_qpsk_parameters structure: @@ -321,8 +349,8 @@ itself.
frontend code rate The possible values for the fec_inner field used on -struct dvb_qpsk_parameters and -struct dvb_qam_parameters are: +struct dvb_qpsk_parameters and +struct dvb_qam_parameters are: typedef enum fe_code_rate { @@ -347,9 +375,9 @@ detection.
frontend modulation type for QAM, OFDM and VSB For cable and terrestrial frontends, e. g. for -struct dvb_qpsk_parameters, -struct dvb_qam_parameters and -struct dvb_qam_parameters, +struct dvb_qpsk_parameters, +struct dvb_qam_parameters and +struct dvb_qam_parameters, it needs to specify the quadrature modulation mode which can be one of the following: @@ -370,8 +398,8 @@ it needs to specify the quadrature modulation mode which can be one of the follo } fe_modulation_t;
-Finally, there are several more parameters for OFDM: - +
+More OFDM parameters
Number of carriers per channel @@ -427,6 +455,7 @@ typedef enum fe_hierarchy { } fe_hierarchy_t;
+
diff --git a/Documentation/DocBook/media/dvb/intro.xml b/Documentation/DocBook/media/dvb/intro.xml index 170064a3dc8f4b3db90bb348331ec777074f84c2..2048b53d19b9e81b2a7e159dbde0ce63c1b51f98 100644 --- a/Documentation/DocBook/media/dvb/intro.xml +++ b/Documentation/DocBook/media/dvb/intro.xml @@ -205,7 +205,7 @@ a partial path like: additional include file linux/dvb/version.h exists, which defines the constant DVB_API_VERSION. This document -describes DVB_API_VERSION 5.4. +describes DVB_API_VERSION 5.8.
diff --git a/Documentation/DocBook/media/dvb/kdapi.xml b/Documentation/DocBook/media/dvb/kdapi.xml index 6c67481eaa4b8f20292d5ab9d2cdcdc4398d9f3f..6c11ec52cbeef013839fc3bf8a27c0029c56427a 100644 --- a/Documentation/DocBook/media/dvb/kdapi.xml +++ b/Documentation/DocBook/media/dvb/kdapi.xml @@ -2,7 +2,7 @@ The kernel demux API defines a driver-internal interface for registering low-level, hardware specific driver to a hardware independent demux layer. It is only of interest for DVB device driver writers. The header file for this API is named demux.h and located in -drivers/media/dvb/dvb-core. +drivers/media/dvb-core. Maintainer note: This section must be reviewed. It is probably out of date. diff --git a/Documentation/DocBook/media/dvb/net.xml b/Documentation/DocBook/media/dvb/net.xml index 67d37e5ce5979c1a8ffb160bc0993b7f264fc8ec..a193e86941b55eb85ab45beb6850c90560d7c0a7 100644 --- a/Documentation/DocBook/media/dvb/net.xml +++ b/Documentation/DocBook/media/dvb/net.xml @@ -26,4 +26,131 @@ struct dvb_net_if { DVB net Function Calls To be written… + +
NET_ADD_IF +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = NET_ADD_IF, + struct dvb_net_if *if); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals NET_ADD_IF for this command. + + +struct dvb_net_if *if + + +Undocumented. + + +&return-value-dvb; +
+ +
NET_REMOVE_IF +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = NET_REMOVE_IF); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals NET_REMOVE_IF for this command. + + +&return-value-dvb; +
+ +
NET_GET_IF +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = NET_GET_IF, + struct dvb_net_if *if); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals NET_GET_IF for this command. + + +struct dvb_net_if *if + + +Undocumented. + + +&return-value-dvb; +
diff --git a/Documentation/DocBook/media/dvb/video.xml b/Documentation/DocBook/media/dvb/video.xml index 25fb823226b42231f7333212c8256fd8d44a888b..3ea1ca7e785ef2b271c848442a54177b86b0245d 100644 --- a/Documentation/DocBook/media/dvb/video.xml +++ b/Documentation/DocBook/media/dvb/video.xml @@ -15,6 +15,10 @@ the audio and video device as well as the video4linux device. The ioctls that deal with SPUs (sub picture units) and navigation packets are only supported on some MPEG decoders made for DVD playback. + +These ioctls were also used by V4L2 to control MPEG decoders implemented in V4L2. The use +of these ioctls for that purpose has been made obsolete and proper V4L2 ioctls or controls +have been created to replace that functionality.
Video Data Types @@ -55,7 +59,7 @@ typedef enum {
-video stream source +video_stream_source_t The video stream source is set through the VIDEO_SELECT_SOURCE call and can take the following values, depending on whether we are replaying from an internal (demuxer) or external (user write) source. @@ -76,7 +80,7 @@ call.
-video play state +video_play_state_t The following values can be returned by the VIDEO_GET_STATUS call representing the state of video playback. @@ -90,9 +94,9 @@ typedef enum {
+struct video_command The structure must be zeroed before use by the application This ensures it can be extended safely in the future. -struct video-command struct video_command { __u32 cmd; @@ -121,7 +125,7 @@ struct video_command {
-struct video_size-t +video_size_t typedef struct { int w; @@ -217,7 +221,7 @@ bits set according to the hardwares capabilities.
-video system +video_system_t A call to VIDEO_SET_SYSTEM sets the desired video system for TV output. The following system types can be set: @@ -263,7 +267,7 @@ call expects the following format for that information:
-video SPU +struct video_spu Calling VIDEO_SET_SPU deactivates or activates SPU decoding, according to the following format: @@ -277,12 +281,12 @@ following format:
-video SPU palette +struct video_spu_palette The following structure is used to set the SPU palette by calling VIDEO_SPU_PALETTE: typedef - struct video_spu_palette{ + struct video_spu_palette { int length; uint8_t ⋆palette; } video_spu_palette_t; @@ -290,13 +294,13 @@ following format:
-video NAVI pack +struct video_navi_pack In order to get the navigational data the following structure has to be passed to the ioctl VIDEO_GET_NAVI: typedef - struct video_navi_pack{ + struct video_navi_pack { int length; /⋆ 0 ... 1024 ⋆/ uint8_t data[1024]; } video_navi_pack_t; @@ -305,7 +309,7 @@ VIDEO_GET_NAVI:
-video attributes +video_attributes_t The following attributes can be set by a call to VIDEO_SET_ATTRIBUTES: @@ -541,6 +545,8 @@ VIDEO_GET_NAVI: role="subsection">VIDEO_STOP DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; instead. This ioctl call asks the Video Device to stop playing the current stream. @@ -598,6 +604,8 @@ role="subsection">VIDEO_STOP role="subsection">VIDEO_PLAY DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; instead. This ioctl call asks the Video Device to start playing a video stream from the @@ -634,6 +642,8 @@ role="subsection">VIDEO_PLAY role="subsection">VIDEO_FREEZE DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; instead. This ioctl call suspends the live video stream being played. Decoding @@ -674,6 +684,8 @@ role="subsection">VIDEO_FREEZE role="subsection">VIDEO_CONTINUE DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; instead. This ioctl call restarts decoding and playing processes of the video stream @@ -710,6 +722,9 @@ role="subsection">VIDEO_CONTINUE role="subsection">VIDEO_SELECT_SOURCE DESCRIPTION +This ioctl is for DVB devices only. This ioctl was also supported by the +V4L2 ivtv driver, but that has been replaced by the ivtv-specific +IVTV_IOC_PASSTHROUGH_MODE ioctl. This ioctl call informs the video device which source shall be used for the input @@ -845,10 +860,160 @@ role="subsection">VIDEO_GET_STATUS &return-value-dvb; +
VIDEO_GET_FRAME_COUNT +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this +ioctl has been replaced by the V4L2_CID_MPEG_VIDEO_DEC_FRAME control. + +This ioctl call asks the Video Device to return the number of displayed frames +since the decoder was started. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_GET_FRAME_COUNT, __u64 *pts); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_FRAME_COUNT for this + command. + + +__u64 *pts + + +Returns the number of frames displayed since the decoder was started. + + + +&return-value-dvb; + +
VIDEO_GET_PTS +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this +ioctl has been replaced by the V4L2_CID_MPEG_VIDEO_DEC_PTS control. + +This ioctl call asks the Video Device to return the current PTS timestamp. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_GET_PTS, __u64 *pts); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_PTS for this + command. + + +__u64 *pts + + +Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / ISO/IEC 13818-1. + + +The PTS should belong to the currently played +frame if possible, but may also be a value close to it +like the PTS of the last decoded frame or the last PTS +extracted by the PES parser. + + +&return-value-dvb; + +
VIDEO_GET_FRAME_RATE +DESCRIPTION + + +This ioctl call asks the Video Device to return the current framerate. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_GET_FRAME_RATE, unsigned int *rate); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_FRAME_RATE for this + command. + + +unsigned int *rate + + +Returns the framerate in number of frames per 1000 seconds. + + + +&return-value-dvb; +
VIDEO_GET_EVENT DESCRIPTION +This ioctl is for DVB devices only. To get events from a V4L2 decoder use the V4L2 +&VIDIOC-DQEVENT; ioctl instead. This ioctl call returns an event of type video_event if available. If an event is @@ -914,6 +1079,152 @@ role="subsection">VIDEO_GET_EVENT +
VIDEO_COMMAND +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this +ioctl has been replaced by the &VIDIOC-DECODER-CMD; ioctl. + +This ioctl commands the decoder. The video_command struct +is a subset of the v4l2_decoder_cmd struct, so refer to the +&VIDIOC-DECODER-CMD; documentation for more information. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_COMMAND, struct video_command *cmd); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_COMMAND for this + command. + + +struct video_command *cmd + + +Commands the decoder. + + + +&return-value-dvb; + +
VIDEO_TRY_COMMAND +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this +ioctl has been replaced by the &VIDIOC-TRY-DECODER-CMD; ioctl. + +This ioctl tries a decoder command. The video_command struct +is a subset of the v4l2_decoder_cmd struct, so refer to the +&VIDIOC-TRY-DECODER-CMD; documentation for more information. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_TRY_COMMAND, struct video_command *cmd); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_TRY_COMMAND for this + command. + + +struct video_command *cmd + + +Try a decoder command. + + + +&return-value-dvb; + +
VIDEO_GET_SIZE +DESCRIPTION + + +This ioctl returns the size and aspect ratio. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_GET_SIZE, video_size_t *size); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_SIZE for this + command. + + +video_size_t *size + + +Returns the size and aspect ratio. + + + +&return-value-dvb; +
VIDEO_SET_DISPLAY_FORMAT DESCRIPTION diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index 1078e45f189f0630c6c6ea50f74b3764dc1cea43..d2eb79e41a011a6e904ba5f81da083cec8e3b520 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -178,23 +178,23 @@ Signal - NTSC for Studio Applications" 1125-Line High-Definition Production" - - EN 50067 + + IEC 62106 - European Committee for Electrotechnical Standardization -(http://www.cenelec.eu) + International Electrotechnical Commission +(http://www.iec.ch) Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz - NRSC-4 + NRSC-4-B National Radio Systems Committee (http://www.nrscstandards.org) - NRSC-4: United States RBDS Standard + NRSC-4-B: United States RBDS Standard @@ -226,4 +226,44 @@ in the frequency range from 87,5 to 108,0 MHz VESA and Industry Standards and Guidelines for Computer Display Monitor Timing (DMT) + + EDID + + Video Electronics Standards Association +(http://www.vesa.org) + + VESA Enhanced Extended Display Identification Data Standard + Release A, Revision 2 + + + + HDCP + + Digital Content Protection LLC +(http://www.digital-cp.com) + + High-bandwidth Digital Content Protection System + Revision 1.3 + + + + HDMI + + HDMI Licensing LLC +(http://www.hdmi.org) + + High-Definition Multimedia Interface + Specification Version 1.4a + + + + DP + + Video Electronics Standards Association +(http://www.vesa.org) + + VESA DisplayPort Standard + Version 1, Revision 2 + + diff --git a/Documentation/DocBook/media/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml index b91d25313b631eb25fec06bf42877131af31c61e..73c6847436c99f7c7ca5fccc3f6b1c2780881afd 100644 --- a/Documentation/DocBook/media/v4l/common.xml +++ b/Documentation/DocBook/media/v4l/common.xml @@ -564,7 +564,7 @@ automatically. To query and select the standard used by the current video input or output applications call the &VIDIOC-G-STD; and &VIDIOC-S-STD; ioctl, respectively. The received -standard can be sensed with the &VIDIOC-QUERYSTD; ioctl. Note parameter of all these ioctls is a pointer to a &v4l2-std-id; type (a standard set), not an index into the standard enumeration. +standard can be sensed with the &VIDIOC-QUERYSTD; ioctl. Note that the parameter of all these ioctls is a pointer to a &v4l2-std-id; type (a standard set), not an index into the standard enumeration. An alternative to the current scheme is to use pointers to indices as arguments of VIDIOC_G_STD and VIDIOC_S_STD, the &v4l2-input; and @@ -588,30 +588,28 @@ switch to a standard by &v4l2-std-id;. Drivers must implement all video standard ioctls when the device has one or more video inputs or outputs. - Special rules apply to USB cameras where the notion of video -standards makes little sense. More generally any capture device, -output devices accordingly, which is + Special rules apply to devices such as USB cameras where the notion of video +standards makes little sense. More generally for any capture or output device +which is: incapable of capturing fields or frames at the nominal rate of the video standard, or - where timestamps refer -to the instant the field or frame was received by the driver, not the -capture time, or - - - where sequence numbers -refer to the frames received by the driver, not the captured -frames. + that does not support the video standard formats at all. Here the driver shall set the std field of &v4l2-input; and &v4l2-output; -to zero, the VIDIOC_G_STD, +to zero and the VIDIOC_G_STD, VIDIOC_S_STD, VIDIOC_QUERYSTD and VIDIOC_ENUMSTD ioctls shall return the -&EINVAL;. +&ENOTTY;. + See for a rationale. + Applications can make use of the and + flags to determine whether the video standard ioctls +are available for the device. +&ENOTTY;. See for a rationale. Probably even USB cameras follow some well known video standard. It might have been better to explicitly indicate elsewhere if a device cannot live @@ -626,9 +624,9 @@ up to normal expectations, instead of this exception. &v4l2-standard; standard; if (-1 == ioctl (fd, &VIDIOC-G-STD;, &std_id)) { - /* Note when VIDIOC_ENUMSTD always returns EINVAL this + /* Note when VIDIOC_ENUMSTD always returns ENOTTY this is no video device or it falls under the USB exception, - and VIDIOC_G_STD returning EINVAL is no error. */ + and VIDIOC_G_STD returning ENOTTY is no error. */ perror ("VIDIOC_G_STD"); exit (EXIT_FAILURE); diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index faa0fd14666a54bc2688ca176c9dee531cc5eccf..c6ae4c9d0e0c6f0ae6f9661f916bb73e3d7fc89f 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -1476,7 +1476,7 @@ follows. V4L2_BUF_TYPE_PRIVATE_BASE - V4L2_BUF_TYPE_PRIVATE + V4L2_BUF_TYPE_PRIVATE (but this is deprecated) @@ -2468,21 +2468,9 @@ that used it. It was originally scheduled for removal in 2.6.35. reserved2 and removed V4L2_BUF_FLAG_INPUT. - -
- -
- V4L2 in Linux 3.6 - Added V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE capabilities. - -
- -
- V4L2 in Linux 3.6 - Added support for frequency band enumerations: &VIDIOC-ENUM-FREQ-BANDS;. @@ -2567,29 +2555,6 @@ and may change in the future. Video Output Overlay (OSD) Interface, . - - V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY, - &v4l2-buf-type;, . - - - V4L2_CAP_VIDEO_OUTPUT_OVERLAY, -&VIDIOC-QUERYCAP; ioctl, . - - - &VIDIOC-ENUM-FRAMESIZES; and -&VIDIOC-ENUM-FRAMEINTERVALS; ioctls. - - - &VIDIOC-G-ENC-INDEX; ioctl. - - - &VIDIOC-ENCODER-CMD; and &VIDIOC-TRY-ENCODER-CMD; -ioctls. - - - &VIDIOC-DECODER-CMD; and &VIDIOC-TRY-DECODER-CMD; -ioctls. - &VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER; ioctls. @@ -2614,10 +2579,6 @@ ioctls. Sub-device selection API: &VIDIOC-SUBDEV-G-SELECTION; and &VIDIOC-SUBDEV-S-SELECTION; ioctls. - - - V4L2_CID_AUTO_FOCUS_AREA control. - Support for frequency band enumeration: &VIDIOC-ENUM-FREQ-BANDS; ioctl. diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index b0964fb4e8348853619efd3296b7821d4e6b6803..272a5f71850934e23a3c6e7ca7b5d8cc60b9784c 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -3505,7 +3505,7 @@ This encodes up to 31 pre-defined programme types. Sets the Programme Service name (PS_NAME) for transmission. It is intended for static display on a receiver. It is the primary aid to listeners in programme service -identification and selection. In Annex E of , the RDS specification, +identification and selection. In Annex E of , the RDS specification, there is a full description of the correct character encoding for Programme Service name strings. Also from RDS specification, PS is usually a single eight character text. However, it is also possible to find receivers which can scroll strings sized as 8 x N characters. So, this control must be configured @@ -3519,7 +3519,7 @@ with steps of 8 characters. The result is it must always contain a string with s what is being broadcasted. RDS Radio Text can be applied when broadcaster wishes to transmit longer PS names, programme-related information or any other text. In these cases, RadioText should be used in addition to V4L2_CID_RDS_TX_PS_NAME. The encoding for Radio Text strings is also fully described -in Annex E of . The length of Radio Text strings depends on which RDS Block is being +in Annex E of . The length of Radio Text strings depends on which RDS Block is being used to transmit it, either 32 (2A block) or 64 (2B block). However, it is also possible to find receivers which can scroll strings sized as 32 x N or 64 x N characters. So, this control must be configured with steps of 32 or 64 characters. The result is it must always contain a string with size multiple of 32 or 64. @@ -3650,7 +3650,7 @@ manually or automatically if set to zero. Unit, range and step are driver-specif For more details about RDS specification, refer to - document, from CENELEC. + document, from CENELEC.
@@ -3717,232 +3717,231 @@ interface and may change in the future. use case involving camera or individually. -
+ + Flash Control IDs + + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_FLASH_CLASS + class + + + The FLASH class descriptor. + + + V4L2_CID_FLASH_LED_MODE + menu + + + Defines the mode of the flash LED, + the high-power white LED attached to the flash controller. + Setting this control may not be possible in presence of + some faults. See V4L2_CID_FLASH_FAULT. + + + + + + V4L2_FLASH_LED_MODE_NONE + Off. + + + V4L2_FLASH_LED_MODE_FLASH + Flash mode. + + + V4L2_FLASH_LED_MODE_TORCH + Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY. + + + + + + V4L2_CID_FLASH_STROBE_SOURCE + menu + + Defines the source of the flash LED + strobe. + + + + + + V4L2_FLASH_STROBE_SOURCE_SOFTWARE + The flash strobe is triggered by using + the V4L2_CID_FLASH_STROBE control. + + + V4L2_FLASH_STROBE_SOURCE_EXTERNAL + The flash strobe is triggered by an + external source. Typically this is a sensor, + which makes it possible to synchronises the + flash strobe start to exposure start. + + + + + + V4L2_CID_FLASH_STROBE + button + + + Strobe flash. Valid when + V4L2_CID_FLASH_LED_MODE is set to + V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE + is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this + control may not be possible in presence of some faults. + See V4L2_CID_FLASH_FAULT. + + + V4L2_CID_FLASH_STROBE_STOP + button + + Stop flash strobe immediately. + + + V4L2_CID_FLASH_STROBE_STATUS + boolean + + + Strobe status: whether the flash + is strobing at the moment or not. This is a read-only + control. + + + V4L2_CID_FLASH_TIMEOUT + integer + + + Hardware timeout for flash. The + flash strobe is stopped after this period of time has + passed from the start of the strobe. + + + V4L2_CID_FLASH_INTENSITY + integer + + + Intensity of the flash strobe when + the flash LED is in flash mode + (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps + (mA) if possible. + + + V4L2_CID_FLASH_TORCH_INTENSITY + integer + + + Intensity of the flash LED in + torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be + milliamps (mA) if possible. Setting this control may not + be possible in presence of some faults. See + V4L2_CID_FLASH_FAULT. + + + V4L2_CID_FLASH_INDICATOR_INTENSITY + integer + + + Intensity of the indicator LED. + The indicator LED may be fully independent of the flash + LED. The unit should be microamps (uA) if possible. + + + V4L2_CID_FLASH_FAULT + bitmask + + + Faults related to the flash. The + faults tell about specific problems in the flash chip + itself or the LEDs attached to it. Faults may prevent + further use of some of the flash controls. In particular, + V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE + if the fault affects the flash LED. Exactly which faults + have such an effect is chip dependent. Reading the faults + resets the control and returns the chip to a usable state + if possible. + + + + + + V4L2_FLASH_FAULT_OVER_VOLTAGE + Flash controller voltage to the flash LED + has exceeded the limit specific to the flash + controller. + + + V4L2_FLASH_FAULT_TIMEOUT + The flash strobe was still on when + the timeout set by the user --- + V4L2_CID_FLASH_TIMEOUT control --- has expired. + Not all flash controllers may set this in all + such conditions. + + + V4L2_FLASH_FAULT_OVER_TEMPERATURE + The flash controller has overheated. + + + V4L2_FLASH_FAULT_SHORT_CIRCUIT + The short circuit protection of the flash + controller has been triggered. + + + V4L2_FLASH_FAULT_OVER_CURRENT + Current in the LED power supply has exceeded the limit + specific to the flash controller. + + + V4L2_FLASH_FAULT_INDICATOR + The flash controller has detected a short or open + circuit condition on the indicator LED. + + + + + + V4L2_CID_FLASH_CHARGE + boolean + + Enable or disable charging of the xenon + flash capacitor. + + + V4L2_CID_FLASH_READY + boolean + + + Is the flash ready to strobe? + Xenon flashes require their capacitors charged before + strobing. LED flashes often require a cooldown period + after strobe during which another strobe will not be + possible. This is a read-only control. + + + + +
+
- - - Flash Control IDs - - - - - - - - - - - ID - Type - Description - - - - - - V4L2_CID_FLASH_CLASS - class - - - The FLASH class descriptor. - - - V4L2_CID_FLASH_LED_MODE - menu - - - Defines the mode of the flash LED, - the high-power white LED attached to the flash controller. - Setting this control may not be possible in presence of - some faults. See V4L2_CID_FLASH_FAULT. - - - - - - V4L2_FLASH_LED_MODE_NONE - Off. - - - V4L2_FLASH_LED_MODE_FLASH - Flash mode. - - - V4L2_FLASH_LED_MODE_TORCH - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY. - - - - - - V4L2_CID_FLASH_STROBE_SOURCE - menu - - Defines the source of the flash LED - strobe. - - - - - - V4L2_FLASH_STROBE_SOURCE_SOFTWARE - The flash strobe is triggered by using - the V4L2_CID_FLASH_STROBE control. - - - V4L2_FLASH_STROBE_SOURCE_EXTERNAL - The flash strobe is triggered by an - external source. Typically this is a sensor, - which makes it possible to synchronises the - flash strobe start to exposure start. - - - - - - V4L2_CID_FLASH_STROBE - button - - - Strobe flash. Valid when - V4L2_CID_FLASH_LED_MODE is set to - V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE - is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this - control may not be possible in presence of some faults. - See V4L2_CID_FLASH_FAULT. - - - V4L2_CID_FLASH_STROBE_STOP - button - - Stop flash strobe immediately. - - - V4L2_CID_FLASH_STROBE_STATUS - boolean - - - Strobe status: whether the flash - is strobing at the moment or not. This is a read-only - control. - - - V4L2_CID_FLASH_TIMEOUT - integer - - - Hardware timeout for flash. The - flash strobe is stopped after this period of time has - passed from the start of the strobe. - - - V4L2_CID_FLASH_INTENSITY - integer - - - Intensity of the flash strobe when - the flash LED is in flash mode - (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps - (mA) if possible. - - - V4L2_CID_FLASH_TORCH_INTENSITY - integer - - - Intensity of the flash LED in - torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be - milliamps (mA) if possible. Setting this control may not - be possible in presence of some faults. See - V4L2_CID_FLASH_FAULT. - - - V4L2_CID_FLASH_INDICATOR_INTENSITY - integer - - - Intensity of the indicator LED. - The indicator LED may be fully independent of the flash - LED. The unit should be microamps (uA) if possible. - - - V4L2_CID_FLASH_FAULT - bitmask - - - Faults related to the flash. The - faults tell about specific problems in the flash chip - itself or the LEDs attached to it. Faults may prevent - further use of some of the flash controls. In particular, - V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE - if the fault affects the flash LED. Exactly which faults - have such an effect is chip dependent. Reading the faults - resets the control and returns the chip to a usable state - if possible. - - - - - - V4L2_FLASH_FAULT_OVER_VOLTAGE - Flash controller voltage to the flash LED - has exceeded the limit specific to the flash - controller. - - - V4L2_FLASH_FAULT_TIMEOUT - The flash strobe was still on when - the timeout set by the user --- - V4L2_CID_FLASH_TIMEOUT control --- has expired. - Not all flash controllers may set this in all - such conditions. - - - V4L2_FLASH_FAULT_OVER_TEMPERATURE - The flash controller has overheated. - - - V4L2_FLASH_FAULT_SHORT_CIRCUIT - The short circuit protection of the flash - controller has been triggered. - - - V4L2_FLASH_FAULT_OVER_CURRENT - Current in the LED power supply has exceeded the limit - specific to the flash controller. - - - V4L2_FLASH_FAULT_INDICATOR - The flash controller has detected a short or open - circuit condition on the indicator LED. - - - - - - V4L2_CID_FLASH_CHARGE - boolean - - Enable or disable charging of the xenon - flash capacitor. - - - V4L2_CID_FLASH_READY - boolean - - - Is the flash ready to strobe? - Xenon flashes require their capacitors charged before - strobing. LED flashes often require a cooldown period - after strobe during which another strobe will not be - possible. This is a read-only control. - - - - -
@@ -4274,4 +4273,165 @@ interface and may change in the future.
+ +
+ Digital Video Control Reference + + + Experimental + + This is an experimental interface and may + change in the future. + + + + The Digital Video control class is intended to control receivers + and transmitters for VGA, + DVI + (Digital Visual Interface), HDMI () and DisplayPort (). + These controls are generally expected to be private to the receiver or transmitter + subdevice that implements them, so they are only exposed on the + /dev/v4l-subdev* device node. + + + Note that these devices can have multiple input or output pads which are + hooked up to e.g. HDMI connectors. Even though the subdevice will receive or + transmit video from/to only one of those pads, the other pads can still be + active when it comes to EDID (Extended Display Identification Data, + ) and HDCP (High-bandwidth Digital Content + Protection System, ) processing, allowing the device + to do the fairly slow EDID/HDCP handling in advance. This allows for quick + switching between connectors. + + These pads appear in several of the controls in this section as + bitmasks, one bit for each pad. Bit 0 corresponds to pad 0, bit 1 to pad 1, + etc. The maximum value of the control is the set of valid pads. + + + Digital Video Control IDs + + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_DV_CLASS + class + + + The Digital Video class descriptor. + + + V4L2_CID_DV_TX_HOTPLUG + bitmask + + + Many connectors have a hotplug pin which is high + if EDID information is available from the source. This control shows the + state of the hotplug pin as seen by the transmitter. + Each bit corresponds to an output pad on the transmitter. If an output pad + does not have an associated hotplug pin, then the bit for that pad will be 0. + This read-only control is applicable to DVI-D, HDMI and DisplayPort connectors. + + + + V4L2_CID_DV_TX_RXSENSE + bitmask + + + Rx Sense is the detection of pull-ups on the TMDS + clock lines. This normally means that the sink has left/entered standby (i.e. + the transmitter can sense that the receiver is ready to receive video). + Each bit corresponds to an output pad on the transmitter. If an output pad + does not have an associated Rx Sense, then the bit for that pad will be 0. + This read-only control is applicable to DVI-D and HDMI devices. + + + + V4L2_CID_DV_TX_EDID_PRESENT + bitmask + + + When the transmitter sees the hotplug signal from the + receiver it will attempt to read the EDID. If set, then the transmitter has read + at least the first block (= 128 bytes). + Each bit corresponds to an output pad on the transmitter. If an output pad + does not support EDIDs, then the bit for that pad will be 0. + This read-only control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. + + + + V4L2_CID_DV_TX_MODE + enum v4l2_dv_tx_mode + + + HDMI transmitters can transmit in DVI-D mode (just video) + or in HDMI mode (video + audio + auxiliary data). This control selects which mode + to use: V4L2_DV_TX_MODE_DVI_D or V4L2_DV_TX_MODE_HDMI. + This control is applicable to HDMI connectors. + + + + V4L2_CID_DV_TX_RGB_RANGE + enum v4l2_dv_rgb_range + + + Select the quantization range for RGB output. V4L2_DV_RANGE_AUTO + follows the RGB quantization range specified in the standard for the video interface + (ie. for HDMI). V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the standard + to be compatible with sinks that have not implemented the standard correctly + (unfortunately quite common for HDMI and DVI-D). Full range allows all possible values to be + used whereas limited range sets the range to (16 << (N-8)) - (235 << (N-8)) + where N is the number of bits per component. + This control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. + + + + V4L2_CID_DV_RX_POWER_PRESENT + bitmask + + + Detects whether the receiver receives power from the source + (e.g. HDMI carries 5V on one of the pins). This is often used to power an eeprom + which contains EDID information, such that the source can read the EDID even if + the sink is in standby/power off. + Each bit corresponds to an input pad on the transmitter. If an input pad + cannot detect whether power is present, then the bit for that pad will be 0. + This read-only control is applicable to DVI-D, HDMI and DisplayPort connectors. + + + + V4L2_CID_DV_RX_RGB_RANGE + enum v4l2_dv_rgb_range + + + Select the quantization range for RGB input. V4L2_DV_RANGE_AUTO + follows the RGB quantization range specified in the standard for the video interface + (ie. for HDMI). V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the standard + to be compatible with sources that have not implemented the standard correctly + (unfortunately quite common for HDMI and DVI-D). Full range allows all possible values to be + used whereas limited range sets the range to (16 << (N-8)) - (235 << (N-8)) + where N is the number of bits per component. + This control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. + + + + + +
+ +
diff --git a/Documentation/DocBook/media/v4l/dev-osd.xml b/Documentation/DocBook/media/v4l/dev-osd.xml index 479d9433869aff1e18fdc12d3c2aa1d0bbee772b..dd91d6134e8c950a0add05ab4e6cd45f2c04b1f7 100644 --- a/Documentation/DocBook/media/v4l/dev-osd.xml +++ b/Documentation/DocBook/media/v4l/dev-osd.xml @@ -1,13 +1,6 @@ Video Output Overlay Interface Also known as On-Screen Display (OSD) - - Experimental - - This is an experimental -interface and may change in the future. - - Some video output devices can overlay a framebuffer image onto the outgoing video signal. Applications can set up such an overlay using this interface, which borrows structures and ioctls of the - For more information see the core RDS standard + For more information see the core RDS standard and the RBDS standard . Note that the RBDS standard as is used in the USA is almost identical diff --git a/Documentation/DocBook/media/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml index a3d9dd093268747de3751dcc41001e1fba638b11..d15aaf83f56f433a6fa09711a5b0ba5625ed30a0 100644 --- a/Documentation/DocBook/media/v4l/dev-subdev.xml +++ b/Documentation/DocBook/media/v4l/dev-subdev.xml @@ -374,29 +374,29 @@ rectangle --- if it is supported by the hardware. - Sink pad format. The user configures the sink pad + Sink pad format. The user configures the sink pad format. This format defines the parameters of the image the - entity receives through the pad for further processing. + entity receives through the pad for further processing. - Sink pad actual crop selection. The sink pad crop - defines the crop performed to the sink pad format. + Sink pad actual crop selection. The sink pad crop + defines the crop performed to the sink pad format. - Sink pad actual compose selection. The size of the + Sink pad actual compose selection. The size of the sink pad compose rectangle defines the scaling ratio compared to the size of the sink pad crop rectangle. The location of the compose rectangle specifies the location of the actual sink compose rectangle in the sink compose bounds - rectangle. + rectangle. - Source pad actual crop selection. Crop on the source + Source pad actual crop selection. Crop on the source pad defines crop performed to the image in the sink compose - bounds rectangle. + bounds rectangle. - Source pad format. The source pad format defines the + Source pad format. The source pad format defines the output pixel format of the subdev, as well as the other parameters with the exception of the image width and height. Width and height are defined by the size of the source pad - actual crop selection. + actual crop selection. Accessing any of the above rectangles not supported by the diff --git a/Documentation/DocBook/media/v4l/gen-errors.xml b/Documentation/DocBook/media/v4l/gen-errors.xml index 5bbf3ce1973a8df5d72619ce3df4cc62de52b036..7e29a4e1f696ec0c898fa431c4ea9163b5a12de9 100644 --- a/Documentation/DocBook/media/v4l/gen-errors.xml +++ b/Documentation/DocBook/media/v4l/gen-errors.xml @@ -6,6 +6,15 @@ &cs-str; + + EAGAIN (aka EWOULDBLOCK) + The ioctl can't be handled because the device is in state where + it can't perform it. This could happen for example in case where + device is sleeping and ioctl is performed to query statistics. + It is also returned when the ioctl would need to wait + for an event, but the device was opened in non-blocking mode. + + EBADF The file descriptor is not a valid. @@ -50,22 +59,12 @@ that this request would overcommit the usb bandwidth reserved for periodic transfers (up to 80% of the USB bandwidth). - - ENOSYS or EOPNOTSUPP - Function not available for this device (dvb API only. Will likely - be replaced anytime soon by ENOTTY). - EPERM Permission denied. Can be returned if the device needs write permission, or some special capabilities is needed (e. g. root) - - EWOULDBLOCK - Operation would block. Used when the ioctl would need to wait - for an event, but the device was opened in non-blocking mode. - diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index 1885cc0755cb48a438aadfe686857f46ee541172..97f785add841c602d179a2b131060994deeaa26d 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -613,8 +613,8 @@ field is independent of the timestamp and __u32 sequence - Set by the driver, counting the frames in the -sequence. + Set by the driver, counting the frames (not fields!) in +sequence. This field is set for both input and output devices. In for details. __u32 reserved2 - A place holder for future extensions and custom -(driver defined) buffer types -V4L2_BUF_TYPE_PRIVATE and higher. Applications + A place holder for future extensions. Applications should set this to 0. __u32 reserved - A place holder for future extensions and custom -(driver defined) buffer types -V4L2_BUF_TYPE_PRIVATE and higher. Applications + A place holder for future extensions. Applications should set this to 0. @@ -827,14 +823,7 @@ should set this to 0. V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY 8 Buffer for video output overlay (OSD), see . Status: Experimental. - - - V4L2_BUF_TYPE_PRIVATE - 0x80 - This and higher values are reserved for custom -(driver defined) buffer types. + linkend="osd" />. diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml index 8eace3e2e7d4d7e0176f7539341d006fdb81bd83..2d3f0b1aefe0c878b6f133987b4abf70857c9c39 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml @@ -22,8 +22,7 @@ with 10 bits per colour compressed to 8 bits each, using DPCM compression. DPCM, differential pulse-code modulation, is lossy. Each colour component consumes 8 bits of memory. In other respects - this format is similar to . + this format is similar to . diff --git a/Documentation/DocBook/media/v4l/pixfmt-yvu420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yvu420m.xml new file mode 100644 index 0000000000000000000000000000000000000000..2330667907c7313372a12ef50fb3139ce19803e9 --- /dev/null +++ b/Documentation/DocBook/media/v4l/pixfmt-yvu420m.xml @@ -0,0 +1,154 @@ + + + V4L2_PIX_FMT_YVU420M ('YM21') + &manvol; + + + V4L2_PIX_FMT_YVU420M + Variation of V4L2_PIX_FMT_YVU420 + with planes non contiguous in memory. + + + + Description + + This is a multi-planar format, as opposed to a packed format. +The three components are separated into three sub-images or planes. + +The Y plane is first. The Y plane has one byte per pixel. The Cr data +constitutes the second plane which is half the width and half +the height of the Y plane (and of the image). Each Cr belongs to four +pixels, a two-by-two square of the image. For example, +Cr0 belongs to Y'00, +Y'01, Y'10, and +Y'11. The Cb data, just like the Cr plane, constitutes +the third plane. + + If the Y plane has pad bytes after each row, then the Cr +and Cb planes have half as many pad bytes after their rows. In other +words, two Cx rows (including padding) is exactly as long as one Y row +(including padding). + + V4L2_PIX_FMT_YVU420M is intended to be +used only in drivers and applications that support the multi-planar API, +described in . + + + <constant>V4L2_PIX_FMT_YVU420M</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start0 + 0: + Y'00 + Y'01 + Y'02 + Y'03 + + + start0 + 4: + Y'10 + Y'11 + Y'12 + Y'13 + + + start0 + 8: + Y'20 + Y'21 + Y'22 + Y'23 + + + start0 + 12: + Y'30 + Y'31 + Y'32 + Y'33 + + + + start1 + 0: + Cr00 + Cr01 + + + start1 + 2: + Cr10 + Cr11 + + + + start2 + 0: + Cb00 + Cb01 + + + start2 + 2: + Cb10 + Cb11 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YY + YY + + + + C + C + + + 1 + YY + YY + + + + + + 2 + YY + YY + + + + C + C + + + 3 + YY + YY + + + + + + + + + diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml index e58934c92895f159fc3200946a0d75ed50434e84..1ddbfabe31953b34fa8f51a8dc7c515daca39a06 100644 --- a/Documentation/DocBook/media/v4l/pixfmt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt.xml @@ -708,6 +708,7 @@ information. &sub-y41p; &sub-yuv420; &sub-yuv420m; + &sub-yvu420m; &sub-yuv410; &sub-yuv422p; &sub-yuv411p; diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml index e7ed5077834deaa027fe1a202a555631338dba15..4c238ce068b0aa238155037be481336d800b8c78 100644 --- a/Documentation/DocBook/media/v4l/selection-api.xml +++ b/Documentation/DocBook/media/v4l/selection-api.xml @@ -40,6 +40,7 @@ cropping and composing rectangles have the same size.
Selection targets +
Cropping and composing targets @@ -52,12 +53,12 @@ cropping and composing rectangles have the same size.
+ + See for more + information.
- See for more - information. -
Configuration @@ -216,18 +217,17 @@ composing and cropping operations by setting the appropriate targets. The V4L2 API lacks any support for composing to and cropping from an image inside a memory buffer. The application could configure a capture device to fill only a part of an image by abusing V4L2 API. Cropping a smaller image from a larger -one is achieved by setting the field -&v4l2-pix-format;::bytesperline . Introducing an image offsets -could be done by modifying field &v4l2-buffer;::m:userptr - before calling VIDIOC_QBUF . Those +one is achieved by setting the field +&v4l2-pix-format;::bytesperline. Introducing an image offsets +could be done by modifying field &v4l2-buffer;::m_userptr +before calling VIDIOC_QBUF . Those operations should be avoided because they are not portable (endianness), and do not work for macroblock and Bayer formats and mmap buffers. The selection API deals with configuration of buffer cropping/composing in a clear, intuitive and portable way. Next, with the selection API the concepts of the padded target -and constraints flags are introduced. Finally, &v4l2-crop; - and &v4l2-cropcap; have no reserved -fields. Therefore there is no way to extend their functionality. The new - &v4l2-selection; provides a lot of place for future +and constraints flags are introduced. Finally, &v4l2-crop; and &v4l2-cropcap; +have no reserved fields. Therefore there is no way to extend their functionality. +The new &v4l2-selection; provides a lot of place for future extensions. Driver developers are encouraged to implement only selection API. The former cropping API would be simulated using the new one. diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index eee6908c749fd3b6fb66e0e9ab84c9775c09509b..10ccde9d16d016d6f141f62479afa8f73753850b 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -145,9 +145,12 @@ applications. --> hv Added VIDIOC_ENUM_FREQ_BANDS. + + + 3.5 2012-05-07 - sa, sn + sa, sn, hv Added V4L2_CTRL_TYPE_INTEGER_MENU and V4L2 subdev selections API. Improved the description of V4L2_CID_COLORFX control, added V4L2_CID_COLORFX_CBCR control. @@ -158,11 +161,8 @@ applications. --> V4L2_CID_3A_LOCK, V4L2_CID_AUTO_FOCUS_START, V4L2_CID_AUTO_FOCUS_STOP, V4L2_CID_AUTO_FOCUS_STATUS and V4L2_CID_AUTO_FOCUS_RANGE. - - 2012-05-01 - hv - Added VIDIOC_ENUM_DV_TIMINGS, VIDIOC_QUERY_DV_TIMINGS and - VIDIOC_DV_TIMINGS_CAP. + Added VIDIOC_ENUM_DV_TIMINGS, VIDIOC_QUERY_DV_TIMINGS and + VIDIOC_DV_TIMINGS_CAP. @@ -472,7 +472,7 @@ and discussions on the V4L mailing list. Video for Linux Two API Specification - Revision 3.5 + Revision 3.6 &sub-common; @@ -581,6 +581,7 @@ and discussions on the V4L mailing list. &sub-subdev-enum-frame-size; &sub-subdev-enum-mbus-code; &sub-subdev-g-crop; + &sub-subdev-g-edid; &sub-subdev-g-fmt; &sub-subdev-g-frame-interval; &sub-subdev-g-selection; diff --git a/Documentation/DocBook/media/v4l/vidioc-cropcap.xml b/Documentation/DocBook/media/v4l/vidioc-cropcap.xml index f1bac2c6e9781e1079ee4ade3a732c515a1cfe42..bf7cc979fdfa6bbba9d92c0d5f7e7b68cc6a1518 100644 --- a/Documentation/DocBook/media/v4l/vidioc-cropcap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-cropcap.xml @@ -59,6 +59,9 @@ constant except when switching the video standard. Remember this switch can occur implicit when switching the video input or output. + This ioctl must be implemented for video capture or output devices that +support cropping and/or scaling and/or have non-square pixels, and for overlay devices. + struct <structname>v4l2_cropcap</structname> @@ -70,10 +73,10 @@ output. Type of the data stream, set by the application. Only these types are valid here: V4L2_BUF_TYPE_VIDEO_CAPTURE, +V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, V4L2_BUF_TYPE_VIDEO_OUTPUT, -V4L2_BUF_TYPE_VIDEO_OVERLAY, and custom (driver -defined) types with code V4L2_BUF_TYPE_PRIVATE -and higher. See . +V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE and +V4L2_BUF_TYPE_VIDEO_OVERLAY. See . struct v4l2_rect @@ -156,8 +159,7 @@ on 22 Oct 2002 subject "Re:[V4L][patches!] Re:v4l2/kernel-2.5" --> EINVAL The &v4l2-cropcap; type is -invalid. This is not permitted for video capture, output and overlay devices, -which must support VIDIOC_CROPCAP. +invalid. diff --git a/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml index 74b87f6e480aa241f751c4423060979b078db7be..9215627b04c77827e7b3195857d53c0fbdcea355 100644 --- a/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml @@ -49,13 +49,6 @@ Description - - Experimental - - This is an experimental -interface and may change in the future. - - These ioctls control an audio/video (usually MPEG-) decoder. VIDIOC_DECODER_CMD sends a command to the decoder, VIDIOC_TRY_DECODER_CMD can be used to diff --git a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml index f431b3ba79bd70ce3e0e277908f57d1168ff2ee2..0619ca5d2d36a250dae8ffe97771c5aad1e06c85 100644 --- a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml @@ -49,13 +49,6 @@ Description - - Experimental - - This is an experimental -interface and may change in the future. - - These ioctls control an audio/video (usually MPEG-) encoder. VIDIOC_ENCODER_CMD sends a command to the encoder, VIDIOC_TRY_ENCODER_CMD can be used to diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml index 509f0012d2a68044860eb59077b0ee6717f28e38..fced5fb0dbf013d264c8be0fc994bbd43d1620f8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml @@ -229,6 +229,12 @@ intended for the user. is out of bounds. + + ENODATA + + Digital video presets are not supported for this input or output. + + diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml index 24c3bf4fd29a46cdcd71dc3bab3991df46002fc0..b3e17c1dfaf524bd4a485d3ab7bb4ccb5cb70203 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml @@ -106,6 +106,12 @@ application. is out of bounds. + + ENODATA + + Digital video presets are not supported for this input or output. + + diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml index 81ebe48317fe57064045fc77912f1ee17dc96a25..f8dfeed34fcac79793df6303f9e70f3393033104 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml @@ -58,6 +58,9 @@ structure. Drivers fill the rest of the structure or return an incrementing by one until EINVAL is returned. + Note that after switching input or output the list of enumerated image +formats may be different. +
struct <structname>v4l2_fmtdesc</structname> @@ -78,10 +81,8 @@ Only these types are valid here: V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, V4L2_BUF_TYPE_VIDEO_OUTPUT, -V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, -V4L2_BUF_TYPE_VIDEO_OVERLAY, and custom (driver -defined) types with code V4L2_BUF_TYPE_PRIVATE -and higher. See . +V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE and +V4L2_BUF_TYPE_VIDEO_OVERLAY. See . __u32 diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml b/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml index f77a13f486d7968e60128d31a485bde9e580bc5f..a78454b5abcd875e517418f4b803ebed1dce8b1a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml @@ -50,13 +50,6 @@ and pixel format and receives a frame width and height. Description - - Experimental - - This is an experimental -interface and may change in the future. - - This ioctl allows applications to enumerate all frame sizes (&ie; width and height in pixels) that the device supports for the given pixel format. diff --git a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml index 46d5a044a537a0f2647a4755f5601f9cbfc86d5c..3c9a81305ad4af75f8c6728dbfa9a879db4e6167 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml @@ -283,7 +283,7 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009. This input supports setting DV presets by using VIDIOC_S_DV_PRESET. - V4L2_IN_CAP_CUSTOM_TIMINGS + V4L2_IN_CAP_DV_TIMINGS 0x00000002 This input supports setting video timings by using VIDIOC_S_DV_TIMINGS. diff --git a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml index 428020000ef001f4de42b70f243ac551603f1068..f4ab0798545dc7f3ff67a5d5e0d51d2c5562d90b 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml @@ -168,7 +168,7 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009. This output supports setting DV presets by using VIDIOC_S_DV_PRESET. - V4L2_OUT_CAP_CUSTOM_TIMINGS + V4L2_OUT_CAP_DV_TIMINGS 0x00000002 This output supports setting video timings by using VIDIOC_S_DV_TIMINGS. diff --git a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml index 3a5fc5405f96a869f0ff93262211c430dcbd4123..8065099401d16fb34a12ce6156592f2a601f3ce0 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml @@ -378,6 +378,12 @@ system) is out of bounds. + + ENODATA + + Standard video timings are not supported for this input or output. + + diff --git a/Documentation/DocBook/media/v4l/vidioc-g-crop.xml b/Documentation/DocBook/media/v4l/vidioc-g-crop.xml index c4ff3b1887fb6b0782caf2c90c6edfa7fb64ed72..75c6a93de3c173246aff4763da48cfdc4b3ce81f 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-crop.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-crop.xml @@ -104,10 +104,8 @@ changed and VIDIOC_S_CROP returns the type Type of the data stream, set by the application. Only these types are valid here: V4L2_BUF_TYPE_VIDEO_CAPTURE, -V4L2_BUF_TYPE_VIDEO_OUTPUT, -V4L2_BUF_TYPE_VIDEO_OVERLAY, and custom (driver -defined) types with code V4L2_BUF_TYPE_PRIVATE -and higher. See . +V4L2_BUF_TYPE_VIDEO_OUTPUT and +V4L2_BUF_TYPE_VIDEO_OVERLAY. See . &v4l2-rect; diff --git a/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml index 61be9fa3803acbb707277e7e3b5527b4d681533b..b9ea37634f6ccbfe06697df5459ed5232b406543 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml @@ -77,6 +77,12 @@ If the preset is not supported, it returns an &EINVAL; VIDIOC_S_DV_PRESET,VIDIOC_S_DV_PRESET parameter was unsuitable. + + ENODATA + + Digital video presets are not supported for this input or output. + + EBUSY @@ -104,7 +110,4 @@ If the preset is not supported, it returns an &EINVAL;
- - &return-value; - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml index eda1a2991bbe4382f717c5407295407220250161..72369707bd77d00bd78e1546f2d8c17a1e6c0ae8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml @@ -56,7 +56,9 @@ a pointer to the &v4l2-dv-timings; structure as argument. If the ioctl is not su or the timing values are not correct, the driver returns &EINVAL;. The linux/v4l2-dv-timings.h header can be used to get the timings of the formats in the and -standards. +standards. If the current input or output does not support DV timings (e.g. if +&VIDIOC-ENUMINPUT; does not set the V4L2_IN_CAP_DV_TIMINGS flag), then +&ENODATA; is returned. @@ -70,6 +72,12 @@ standards. VIDIOC_S_DV_TIMINGS parameter was unsuitable. + + ENODATA + + Digital video timings are not supported for this input or output. + + EBUSY @@ -320,7 +328,4 @@ detected or used depends on the hardware. - - &return-value; - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml b/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml index 2aef02c9044e039db683f9b37307e24ae0c8eb3e..be25029a16f11dff77a39e5b026fe888db4f5ada 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml @@ -48,13 +48,6 @@ Description - - Experimental - - This is an experimental -interface and may change in the future. - - The VIDIOC_G_ENC_INDEX ioctl provides meta data about a compressed video stream the same or another application currently reads from the driver, which is useful for diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml index 52acff193a6f5dc651d10e5c0413c9e90e05cdbc..ee8f56e1bac0924a1cffc27462743ad24aa62088 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml @@ -81,7 +81,7 @@ the application calls the VIDIOC_S_FMT ioctl with a pointer to a v4l2_format structure the driver checks and adjusts the parameters against hardware abilities. Drivers -should not return an error code unless the input is ambiguous, this is +should not return an error code unless the type field is invalid, this is a mechanism to fathom device capabilities and to approach parameters acceptable for both the application and driver. On success the driver may program the hardware, allocate resources and generally prepare for @@ -107,6 +107,10 @@ disabling I/O or possibly time consuming hardware preparations. Although strongly recommended drivers are not required to implement this ioctl. + The format as returned by VIDIOC_TRY_FMT +must be identical to what VIDIOC_S_FMT returns for +the same input or output. + struct <structname>v4l2_format</structname> @@ -170,9 +174,7 @@ capture and output devices. __u8 raw_data[200] - Place holder for future extensions and custom -(driver defined) formats with type -V4L2_BUF_TYPE_PRIVATE and higher. + Place holder for future extensions. @@ -187,8 +189,7 @@ capture and output devices.EINVAL The &v4l2-format; type -field is invalid, the requested buffer type not supported, or the -format is not supported with this buffer type. +field is invalid or the requested buffer type not supported. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml index f83d2cdd1185419850783f18830abac424b340b8..9058224d1bbfff9c9bcbb71ca017793569a92941 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml @@ -108,9 +108,7 @@ devices.__u8raw_data[200] - A place holder for future extensions and custom -(driver defined) buffer types V4L2_BUF_TYPE_PRIVATE and -higher. + A place holder for future extensions. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml index f76d8a6d9b92df2133babc08456ac3bfc4d9c171..b11ec75e21a10ddff0ea99f16897ec4d660179be 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml @@ -152,12 +152,10 @@ satisfactory parameters have been negotiated. If constraints flags have to be violated at then ERANGE is returned. The error indicates that there exist no rectangle that satisfies the constraints. - - Selection targets and flags are documented in . -
+
Size adjustments with constraint flags. @@ -170,9 +168,9 @@ exist no rectangle that satisfies the constraints.
-
+ - +
struct <structname>v4l2_selection</structname> @@ -208,6 +206,7 @@ exist no rectangle that satisfies the constraints.
+ diff --git a/Documentation/DocBook/media/v4l/vidioc-g-std.xml b/Documentation/DocBook/media/v4l/vidioc-g-std.xml index 99ff1a016220aee8461cddf088de122057c29ecf..4a898417de28933cf319d7ea110db3c7365bf199 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-std.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-std.xml @@ -72,7 +72,9 @@ flags, being a write-only ioctl it does not return the actual new standard as the current input does not support the requested standard the driver returns an &EINVAL;. When the standard set is ambiguous drivers may return EINVAL or choose any of the requested -standards. +standards. If the current input or output does not support standard video timings (e.g. if +&VIDIOC-ENUMINPUT; does not set the V4L2_IN_CAP_STD flag), then +&ENODATA; is returned. @@ -85,6 +87,12 @@ standards. The VIDIOC_S_STD parameter was unsuitable. + + ENODATA + + Standard video timings are not supported for this input or output. + + diff --git a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml index 701138f1209de10ae439aff4da056803fbb79713..6cc82010c7366921792eb4204655bfc92675d0bc 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml @@ -354,6 +354,12 @@ radio tuners. The &VIDIOC-ENUM-FREQ-BANDS; ioctl can be used to enumerate the available frequency bands. + + V4L2_TUNER_CAP_HWSEEK_PROG_LIM + 0x0800 + The range to search when using the hardware seek functionality + is programmable, see &VIDIOC-S-HW-FREQ-SEEK; for details. + diff --git a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml index 77ff5be0809d13ef530ff07718e243aab98358fc..6a821a65a5aec9ce1e196261c5149b666f2e4c2e 100644 --- a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml @@ -155,6 +155,8 @@ or no buffers have been allocated yet, or the userptr or length are invalid. + + EIO VIDIOC_DQBUF failed due to an diff --git a/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml index 1bc8aeb3ff1fe2a57516f39dd54128fc4c30e116..68b49d09e2454d8e6b988521b672bdd80750e182 100644 --- a/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml +++ b/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml @@ -65,5 +65,14 @@ returned. &return-value; + + + + ENODATA + + Digital video presets are not supported for this input or output. + + + diff --git a/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml index 44935a0ffcf0bb619d40898ab0e937f0e13de82b..e185f149e0a18914538eab16e32f684ce15f145d 100644 --- a/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml @@ -77,6 +77,12 @@ capabilities in order to give more precise feedback to the user. &return-value; + + ENODATA + + Digital video timings are not supported for this input or output. + + ENOLINK diff --git a/Documentation/DocBook/media/v4l/vidioc-querycap.xml b/Documentation/DocBook/media/v4l/vidioc-querycap.xml index f33dd746b66b8177b60f5a431aefc937973e5eea..4c70215ae03fee9040c0472c489753dd3d1fed9a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querycap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querycap.xml @@ -90,11 +90,13 @@ ambiguities. __u8 bus_info[32] Location of the device in the system, a -NUL-terminated ASCII string. For example: "PCI Slot 4". This +NUL-terminated ASCII string. For example: "PCI:0000:05:06.0". This information is intended for users, to distinguish multiple -identical devices. If no such information is available the field may -simply count the devices controlled by the driver, or contain the -empty string (bus_info[0] = 0). +identical devices. If no such information is available the field must +simply count the devices controlled by the driver ("platform:vivi-000"). +The bus_info must start with "PCI:" for PCI boards, "PCIe:" for PCI Express boards, +"usb-" for USB devices, "I2C:" for i2c devices, "ISA:" for ISA devices, +"parport" for parallel port devices and "platform:" for platform devices. __u32 diff --git a/Documentation/DocBook/media/v4l/vidioc-querystd.xml b/Documentation/DocBook/media/v4l/vidioc-querystd.xml index 4b79c7c04ed6631c30adc168cf18d5e6608d8478..fe80a183d95776da5c8841ee277496f991420c6c 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querystd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querystd.xml @@ -62,5 +62,13 @@ current video input or output. &return-value; + + + ENODATA + + Standard video timings are not supported for this input or output. + + + diff --git a/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml index d7c95057bc5197e68a00ea22a388150a61702478..2b50ef2007f3cc96dc363176e2c173af96c3e2a8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml +++ b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml @@ -109,9 +109,8 @@ as the &v4l2-format; type field. See __u32 reserved[2] - A place holder for future extensions and custom -(driver defined) buffer types V4L2_BUF_TYPE_PRIVATE and -higher. This array should be zeroed by applications. + A place holder for future extensions. This array should +be zeroed by applications. diff --git a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml index 3dd1bec6d3c74c1a6619364aaae41d85d615d17f..5b379e752194a2b096ce512e11facde121c8aabc 100644 --- a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml +++ b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml @@ -75,6 +75,9 @@ seek is started. This ioctl is supported if the V4L2_CAP_HW_FREQ_SEEK capability is set. + If this ioctl is called from a non-blocking filehandle, then &EAGAIN; is + returned and no seek takes place. + struct <structname>v4l2_hw_freq_seek</structname> @@ -157,6 +160,13 @@ one of the values in the type, fields is wrong. + + EAGAIN + + Attempted to call VIDIOC_S_HW_FREQ_SEEK + with the filehandle in non-blocking mode. + + ENODATA diff --git a/Documentation/DocBook/media/v4l/vidioc-streamon.xml b/Documentation/DocBook/media/v4l/vidioc-streamon.xml index 81cca4569050da8d789dc68973798b69fdbc8a35..716ea15e54a174be6321f19aa4be69fe00487f28 100644 --- a/Documentation/DocBook/media/v4l/vidioc-streamon.xml +++ b/Documentation/DocBook/media/v4l/vidioc-streamon.xml @@ -74,7 +74,12 @@ not transmitted yet. I/O returns to the same state as after calling stream type. This is the same as &v4l2-requestbuffers; type. - Note applications can be preempted for unknown periods right + If VIDIOC_STREAMON is called when streaming +is already in progress, or if VIDIOC_STREAMOFF is called +when streaming is already stopped, then the ioctl does nothing and 0 is +returned. + + Note that applications can be preempted for unknown periods right before or after the VIDIOC_STREAMON or VIDIOC_STREAMOFF calls, there is no notion of starting or stopping "now". Buffer timestamps can be used to diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-edid.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-edid.xml new file mode 100644 index 0000000000000000000000000000000000000000..bbd18f0e6ede8a16797782e3b0dabe04515fc1d2 --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-edid.xml @@ -0,0 +1,152 @@ + + + ioctl VIDIOC_SUBDEV_G_EDID, VIDIOC_SUBDEV_S_EDID + &manvol; + + + + VIDIOC_SUBDEV_G_EDID + VIDIOC_SUBDEV_S_EDID + Get or set the EDID of a video receiver/transmitter + + + + + + int ioctl + int fd + int request + struct v4l2_subdev_edid *argp + + + + + int ioctl + int fd + int request + const struct v4l2_subdev_edid *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_SUBDEV_G_EDID, VIDIOC_SUBDEV_S_EDID + + + + argp + + + + + + + + + Description + These ioctls can be used to get or set an EDID associated with an input pad + from a receiver or an output pad of a transmitter subdevice. + + To get the EDID data the application has to fill in the pad, + start_block, blocks and edid + fields and call VIDIOC_SUBDEV_G_EDID. The current EDID from block + start_block and of size blocks + will be placed in the memory edid points to. The edid + pointer must point to memory at least blocks * 128 bytes + large (the size of one block is 128 bytes). + + If there are fewer blocks than specified, then the driver will set blocks + to the actual number of blocks. If there are no EDID blocks available at all, then the error code + ENODATA is set. + + If blocks have to be retrieved from the sink, then this call will block until they + have been read. + + To set the EDID blocks of a receiver the application has to fill in the pad, + blocks and edid fields and set + start_block to 0. It is not possible to set part of an EDID, + it is always all or nothing. Setting the EDID data is only valid for receivers as it makes + no sense for a transmitter. + + The driver assumes that the full EDID is passed in. If there are more EDID blocks than + the hardware can handle then the EDID is not written, but instead the error code E2BIG is set + and blocks is set to the maximum that the hardware supports. + If start_block is any + value other than 0 then the error code EINVAL is set. + + To disable an EDID you set blocks to 0. Depending on the + hardware this will drive the hotplug pin low and/or block the source from reading the EDID + data in some way. In any case, the end result is the same: the EDID is no longer available. + + +
+ struct <structname>v4l2_subdev_edid</structname> + + &cs-str; + + + __u32 + pad + Pad for which to get/set the EDID blocks. + + + __u32 + start_block + Read the EDID from starting with this block. Must be 0 when setting + the EDID. + + + __u32 + blocks + The number of blocks to get or set. Must be less or equal to 256 (the + maximum number of blocks as defined by the standard). When you set the EDID and + blocks is 0, then the EDID is disabled or erased. + + + __u8 * + edid + Pointer to memory that contains the EDID. The minimum size is + blocks * 128. + + + __u32 + reserved[5] + Reserved for future extensions. Applications and drivers must + set the array to zero. + + + +
+ + + + &return-value; + + + + ENODATA + + The EDID data is not available. + + + + E2BIG + + The EDID data you provided is more than the hardware can handle. + + + + + diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml index f33cc814a01d14d07483a04051f4513ace88876c..1ba9e999af3fec1bed5a3a116f37ac0358caf4e0 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml @@ -69,23 +69,22 @@ more information on how each selection target affects the image processing pipeline inside the subdevice. -
+ Types of selection targets There are two types of selection targets: actual and bounds. The actual targets are the targets which configure the hardware. The BOUNDS target will return a rectangle that contain all possible actual rectangles. -
+ -
+ Discovering supported features To discover which targets are supported, the user can perform VIDIOC_SUBDEV_G_SELECTION on them. Any unsupported target will return EINVAL. -
Selection targets and flags are documented in . @@ -132,6 +131,7 @@ + diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl index 4e8e8985cc1722a5594efdb61c2c0a5af1294929..f2413acfe24105b00b529feca5a0490d6a9b126d 100644 --- a/Documentation/DocBook/media_api.tmpl +++ b/Documentation/DocBook/media_api.tmpl @@ -29,7 +29,7 @@ LINUX MEDIA INFRASTRUCTURE API - 2009-2011 + 2009-2012 LinuxTV Developers @@ -53,7 +53,7 @@ Foundation. A copy of the license is included in the chapter entitled video and radio straming devices, including video cameras, analog and digital TV receiver cards, AM/FM receiver cards, streaming capture devices. - It is divided into three parts. + It is divided into four parts. The first part covers radio, capture, cameras and analog TV devices. The second part covers the @@ -62,7 +62,8 @@ Foundation. A copy of the license is included in the chapter entitled in fact it covers several different video standards including DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated to documment support also for DVB-S2, ISDB-T and ISDB-S. - The third part covers Remote Controller API + The third part covers the Remote Controller API. + The fourth part covers the Media Controller API. For additional information and for the latest development code, see: http://linuxtv.org. For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: Linux Media Mailing List (LMML).. @@ -87,7 +88,7 @@ Foundation. A copy of the license is included in the chapter entitled - 2009-2011 + 2009-2012 Mauro Carvalho Chehab diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt index 27dcaabfb4db2f186bb6df8c5fb016a049c2d2d4..1401cece745ae46ce74fcb8c6a319aa05be7a318 100644 --- a/Documentation/IRQ-domain.txt +++ b/Documentation/IRQ-domain.txt @@ -93,6 +93,7 @@ Linux IRQ number into the hardware. Most drivers cannot use this mapping. ==== Legacy ==== +irq_domain_add_simple() irq_domain_add_legacy() irq_domain_add_legacy_isa() @@ -115,3 +116,7 @@ The legacy map should only be used if fixed IRQ mappings must be supported. For example, ISA controllers would use the legacy map for mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ numbers. + +Most users of legacy mappings should use irq_domain_add_simple() which +will use a legacy domain only if an IRQ range is supplied by the +system and will otherwise use a linear domain mapping. diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index d111e3b23db0bbc0bdf23d81c27e74158ccd9a66..d18ecd827c408d0fb42a8d8a7fc669ce88c95fc2 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -3,15 +3,21 @@ biodoc.txt - Notes on the Generic Block Layer Rewrite in Linux 2.5 capability.txt - - Generic Block Device Capability (/sys/block//capability) + - Generic Block Device Capability (/sys/block//capability) +cfq-iosched.txt + - CFQ IO scheduler tunables +data-integrity.txt + - Block data integrity deadline-iosched.txt - Deadline IO scheduler tunables ioprio.txt - Block io priorities (in CFQ scheduler) +queue-sysfs.txt + - Queue's sysfs entries request.txt - The members of struct request (in include/linux/blkdev.h) stat.txt - - Block layer statistics in /sys/block//stat + - Block layer statistics in /sys/block//stat switching-sched.txt - Switching I/O schedulers at runtime writeback_cache_control.txt diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt index 6d670f570451a14c1ce4f8c2eb1c69d52736ee01..d89b4fe724d75393a003b33c22bf531252c29672 100644 --- a/Documentation/block/cfq-iosched.txt +++ b/Documentation/block/cfq-iosched.txt @@ -1,3 +1,14 @@ +CFQ (Complete Fairness Queueing) +=============================== + +The main aim of CFQ scheduler is to provide a fair allocation of the disk +I/O bandwidth for all the processes which requests an I/O operation. + +CFQ maintains the per process queue for the processes which request I/O +operation(syncronous requests). In case of asynchronous requests, all the +requests from all the processes are batched together according to their +process's I/O priority. + CFQ ioscheduler tunables ======================== @@ -25,6 +36,72 @@ there are multiple spindles behind single LUN (Host based hardware RAID controller or for storage arrays), setting slice_idle=0 might end up in better throughput and acceptable latencies. +back_seek_max +------------- +This specifies, given in Kbytes, the maximum "distance" for backward seeking. +The distance is the amount of space from the current head location to the +sectors that are backward in terms of distance. + +This parameter allows the scheduler to anticipate requests in the "backward" +direction and consider them as being the "next" if they are within this +distance from the current head location. + +back_seek_penalty +----------------- +This parameter is used to compute the cost of backward seeking. If the +backward distance of request is just 1/back_seek_penalty from a "front" +request, then the seeking cost of two requests is considered equivalent. + +So scheduler will not bias toward one or the other request (otherwise scheduler +will bias toward front request). Default value of back_seek_penalty is 2. + +fifo_expire_async +----------------- +This parameter is used to set the timeout of asynchronous requests. Default +value of this is 248ms. + +fifo_expire_sync +---------------- +This parameter is used to set the timeout of synchronous requests. Default +value of this is 124ms. In case to favor synchronous requests over asynchronous +one, this value should be decreased relative to fifo_expire_async. + +slice_async +----------- +This parameter is same as of slice_sync but for asynchronous queue. The +default value is 40ms. + +slice_async_rq +-------------- +This parameter is used to limit the dispatching of asynchronous request to +device request queue in queue's slice time. The maximum number of request that +are allowed to be dispatched also depends upon the io priority. Default value +for this is 2. + +slice_sync +---------- +When a queue is selected for execution, the queues IO requests are only +executed for a certain amount of time(time_slice) before switching to another +queue. This parameter is used to calculate the time slice of synchronous +queue. + +time_slice is computed using the below equation:- +time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the +time_slice of synchronous queue, increase the value of slice_sync. Default +value is 100ms. + +quantum +------- +This specifies the number of request dispatched to the device queue. In a +queue's time slice, a request will not be dispatched if the number of request +in the device exceeds this parameter. This parameter is used for synchronous +request. + +In case of storage with several disk, this setting can limit the parallel +processing of request. Therefore, increasing the value can imporve the +performace although this can cause the latency of some I/O to increase due +to more number of requests. + CFQ IOPS Mode for group scheduling =================================== Basic CFQ design is to provide priority based time slices. Higher priority diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index d8147b336c354e203addd40bb85bcc0abbeeded6..e54ac1d53403094c59e019b1f5e5397e8f4f637d 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -9,20 +9,71 @@ These files are the ones found in the /sys/block/xxx/queue/ directory. Files denoted with a RO postfix are readonly and the RW postfix means read-write. +add_random (RW) +---------------- +This file allows to trun off the disk entropy contribution. Default +value of this file is '1'(on). + +discard_granularity (RO) +----------------------- +This shows the size of internal allocation of the device in bytes, if +reported by the device. A value of '0' means device does not support +the discard functionality. + +discard_max_bytes (RO) +---------------------- +Devices that support discard functionality may have internal limits on +the number of bytes that can be trimmed or unmapped in a single operation. +The discard_max_bytes parameter is set by the device driver to the maximum +number of bytes that can be discarded in a single operation. Discard +requests issued to the device must not exceed this limit. A discard_max_bytes +value of 0 means that the device does not support discard functionality. + +discard_zeroes_data (RO) +------------------------ +When read, this file will show if the discarded block are zeroed by the +device or not. If its value is '1' the blocks are zeroed otherwise not. + hw_sector_size (RO) ------------------- This is the hardware sector size of the device, in bytes. +iostats (RW) +------------- +This file is used to control (on/off) the iostats accounting of the +disk. + +logical_block_size (RO) +----------------------- +This is the logcal block size of the device, in bytes. + max_hw_sectors_kb (RO) ---------------------- This is the maximum number of kilobytes supported in a single data transfer. +max_integrity_segments (RO) +--------------------------- +When read, this file shows the max limit of integrity segments as +set by block layer which a hardware controller can handle. + max_sectors_kb (RW) ------------------- This is the maximum number of kilobytes that the block layer will allow for a filesystem request. Must be smaller than or equal to the maximum size allowed by the hardware. +max_segments (RO) +----------------- +Maximum number of segments of the device. + +max_segment_size (RO) +--------------------- +Maximum segment size of the device. + +minimum_io_size (RO) +-------------------- +This is the smallest preferred io size reported by the device. + nomerges (RW) ------------- This enables the user to disable the lookup logic involved with IO @@ -38,11 +89,31 @@ read or write requests. Note that the total allocated number may be twice this amount, since it applies only to reads or writes (not the accumulated sum). +To avoid priority inversion through request starvation, a request +queue maintains a separate request pool per each cgroup when +CONFIG_BLK_CGROUP is enabled, and this parameter applies to each such +per-block-cgroup request pool. IOW, if there are N block cgroups, +each request queue may have upto N request pools, each independently +regulated by nr_requests. + +optimal_io_size (RO) +-------------------- +This is the optimal io size reported by the device. + +physical_block_size (RO) +------------------------ +This is the physical block size of device, in bytes. + read_ahead_kb (RW) ------------------ Maximum number of kilobytes to read-ahead for filesystems on this block device. +rotational (RW) +--------------- +This file is used to stat if the device is of rotational type or +non-rotational type. + rq_affinity (RW) ---------------- If this option is '1', the block layer will migrate request completions to the diff --git a/Documentation/cgroups/hugetlb.txt b/Documentation/cgroups/hugetlb.txt new file mode 100644 index 0000000000000000000000000000000000000000..a9faaca1f02908b1364303539942f0f3c6434806 --- /dev/null +++ b/Documentation/cgroups/hugetlb.txt @@ -0,0 +1,45 @@ +HugeTLB Controller +------------------- + +The HugeTLB controller allows to limit the HugeTLB usage per control group and +enforces the controller limit during page fault. Since HugeTLB doesn't +support page reclaim, enforcing the limit at page fault time implies that, +the application will get SIGBUS signal if it tries to access HugeTLB pages +beyond its limit. This requires the application to know beforehand how much +HugeTLB pages it would require for its use. + +HugeTLB controller can be created by first mounting the cgroup filesystem. + +# mount -t cgroup -o hugetlb none /sys/fs/cgroup + +With the above step, the initial or the parent HugeTLB group becomes +visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in +the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup. + +New groups can be created under the parent group /sys/fs/cgroup. + +# cd /sys/fs/cgroup +# mkdir g1 +# echo $$ > g1/tasks + +The above steps create a new group g1 and move the current shell +process (bash) into it. + +Brief summary of control files + + hugetlb..limit_in_bytes # set/show limit of "hugepagesize" hugetlb usage + hugetlb..max_usage_in_bytes # show max "hugepagesize" hugetlb usage recorded + hugetlb..usage_in_bytes # show current res_counter usage for "hugepagesize" hugetlb + hugetlb..failcnt # show the number of allocation failure due to HugeTLB limit + +For a system supporting two hugepage size (16M and 16G) the control +files include: + +hugetlb.16GB.limit_in_bytes +hugetlb.16GB.max_usage_in_bytes +hugetlb.16GB.usage_in_bytes +hugetlb.16GB.failcnt +hugetlb.16MB.limit_in_bytes +hugetlb.16MB.max_usage_in_bytes +hugetlb.16MB.usage_in_bytes +hugetlb.16MB.failcnt diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index dd88540bb995e88dab868e1f42cbd218b888d7bd..4372e6b8a353f3dce002ac32b84b6dd3b53a8e31 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -73,6 +73,8 @@ Brief summary of control files. memory.kmem.tcp.limit_in_bytes # set/show hard limit for tcp buf memory memory.kmem.tcp.usage_in_bytes # show current tcp buf memory allocation + memory.kmem.tcp.failcnt # show the number of tcp buf memory usage hits limits + memory.kmem.tcp.max_usage_in_bytes # show max tcp buf memory usage recorded 1. History @@ -187,12 +189,12 @@ the cgroup that brought it in -- this will happen on memory pressure). But see section 8.2: when moving a task to another cgroup, its pages may be recharged to the new cgroup, if move_charge_at_immigrate has been chosen. -Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used. +Exception: If CONFIG_CGROUP_CGROUP_MEMCG_SWAP is not used. When you do swapoff and make swapped-out pages of shmem(tmpfs) to be backed into memory in force, charges for pages are accounted against the caller of swapoff rather than the users of shmem. -2.4 Swap Extension (CONFIG_CGROUP_MEM_RES_CTLR_SWAP) +2.4 Swap Extension (CONFIG_MEMCG_SWAP) Swap Extension allows you to record charge for swap. A swapped-in page is charged back to original page allocator if possible. @@ -259,7 +261,7 @@ When oom event notifier is registered, event will be delivered. per-zone-per-cgroup LRU (cgroup's private LRU) is just guarded by zone->lru_lock, it has no lock of its own. -2.7 Kernel Memory Extension (CONFIG_CGROUP_MEM_RES_CTLR_KMEM) +2.7 Kernel Memory Extension (CONFIG_MEMCG_KMEM) With the Kernel memory extension, the Memory Controller is able to limit the amount of kernel memory used by the system. Kernel memory is fundamentally @@ -286,8 +288,8 @@ per cgroup, instead of globally. a. Enable CONFIG_CGROUPS b. Enable CONFIG_RESOURCE_COUNTERS -c. Enable CONFIG_CGROUP_MEM_RES_CTLR -d. Enable CONFIG_CGROUP_MEM_RES_CTLR_SWAP (to use swap extension) +c. Enable CONFIG_MEMCG +d. Enable CONFIG_MEMCG_SWAP (to use swap extension) 1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?) # mount -t tmpfs none /sys/fs/cgroup diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt index 946c73342cdea1c4afb23cb889828856a5e6308d..1c184495716697610d4bb41e1dde3ab60dce9e51 100644 --- a/Documentation/device-mapper/dm-raid.txt +++ b/Documentation/device-mapper/dm-raid.txt @@ -27,6 +27,10 @@ The target is named "raid" and it accepts the following parameters: - rotating parity N (right-to-left) with data restart raid6_nc RAID6 N continue - rotating parity N (right-to-left) with data continuation + raid10 Various RAID10 inspired algorithms chosen by additional params + - RAID10: Striped Mirrors (aka 'Striping on top of mirrors') + - RAID1E: Integrated Adjacent Stripe Mirroring + - and other similar RAID10 variants Reference: Chapter 4 of http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf @@ -59,6 +63,28 @@ The target is named "raid" and it accepts the following parameters: logical size of the array. The bitmap records the device synchronisation state for each region. + [raid10_copies <# copies>] + [raid10_format near] + These two options are used to alter the default layout of + a RAID10 configuration. The number of copies is can be + specified, but the default is 2. There are other variations + to how the copies are laid down - the default and only current + option is "near". Near copies are what most people think of + with respect to mirroring. If these options are left + unspecified, or 'raid10_copies 2' and/or 'raid10_format near' + are given, then the layouts for 2, 3 and 4 devices are: + 2 drives 3 drives 4 drives + -------- ---------- -------------- + A1 A1 A1 A1 A2 A1 A1 A2 A2 + A2 A2 A2 A3 A3 A3 A3 A4 A4 + A3 A3 A4 A4 A5 A5 A5 A6 A6 + A4 A4 A5 A6 A6 A7 A7 A8 A8 + .. .. .. .. .. .. .. .. .. + The 2-device layout is equivalent 2-way RAID1. The 4-device + layout is what a traditional RAID10 would look like. The + 3-device layout is what might be called a 'RAID1E - Integrated + Adjacent Stripe Mirroring'. + <#raid_devs>: The number of devices composing the array. Each device consists of two entries. The first is the device containing the metadata (if any); the second is the one containing the diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt index 80b9a94d9a236e077ec155faec14c99d5398c115..8b53273cb22f367ae77146bb7da0c6079e7a1bff 100644 --- a/Documentation/devicetree/bindings/arm/mrvl/intc.txt +++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt @@ -38,3 +38,23 @@ Example: reg-names = "mux status", "mux mask"; mrvl,intc-nr-irqs = <2>; }; + +* Marvell Orion Interrupt controller + +Required properties +- compatible : Should be "marvell,orion-intc". +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. Supported value is <1>. +- interrupt-controller : Declare this node to be an interrupt controller. +- reg : Interrupt mask address. A list of 4 byte ranges, one per controller. + One entry in the list represents 32 interrupts. + +Example: + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xfed20204 0x04>, + <0xfed20214 0x04>; + }; diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt new file mode 100644 index 0000000000000000000000000000000000000000..b5cdd20cde9c5429301ca54dcc9be0f79f03fc38 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/marvell.txt @@ -0,0 +1,16 @@ +* Marvell Orion SATA + +Required Properties: +- compatibility : "marvell,orion-sata" +- reg : Address range of controller +- interrupts : Interrupt controller is using +- nr-ports : Number of SATA ports in use. + +Example: + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + nr-ports = <2>; + } diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index 05428f39d9ac0a8dac2eb5c13ae0f1ff53580d0e..e13787498bcf443977ca534ebb2ccfe66fc87cb3 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -27,3 +27,26 @@ Example: interrupt-controller; #interrupt-cells = <1>; }; + +* Marvell Orion GPIO Controller + +Required properties: +- compatible : Should be "marvell,orion-gpio" +- reg : Address and length of the register set for controller. +- gpio-controller : So we know this is a gpio controller. +- ngpio : How many gpios this controller has. +- interrupts : Up to 4 Interrupts for the controller. + +Optional properties: +- mask-offset : For SMP Orions, offset for Nth CPU + +Example: + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <35>, <36>, <37>, <38>; + }; diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 70cd49b1caa8c07e71b7d0855a9469fc989cb7f6..1dd622546d06b711bf262358b387b4bb9af3f68a 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -10,8 +10,8 @@ Required properties: - compatible : Should be "fsl,-esdhc" Optional properties: -- fsl,cd-internal : Indicate to use controller internal card detection -- fsl,wp-internal : Indicate to use controller internal write protection +- fsl,cd-controller : Indicate to use controller internal card detection +- fsl,wp-controller : Indicate to use controller internal write protection Examples: @@ -19,8 +19,8 @@ esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; }; esdhc@70008000 { diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt index d156e1b5db1233c5ffdb2c0f54e1f5bd6234da34..da80c2ae0915e338af82e995ad64d78fdce82add 100644 --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -9,9 +9,9 @@ Required properties: - regulators: list of regulators provided by this controller, must have property "regulator-compatible" to match their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc -- sm0-supply: The input supply for the SM0. -- sm1-supply: The input supply for the SM1. -- sm2-supply: The input supply for the SM2. +- vin-sm0-supply: The input supply for the SM0. +- vin-sm1-supply: The input supply for the SM1. +- vin-sm2-supply: The input supply for the SM2. - vinldo01-supply: The input supply for the LDO1 and LDO2 - vinldo23-supply: The input supply for the LDO2 and LDO3 - vinldo4-supply: The input supply for the LDO4 @@ -30,9 +30,9 @@ Example: #gpio-cells = <2>; gpio-controller; - sm0-supply = <&some_reg>; - sm1-supply = <&some_reg>; - sm2-supply = <&some_reg>; + vin-sm0-supply = <&some_reg>; + vin-sm1-supply = <&some_reg>; + vin-sm2-supply = <&some_reg>; vinldo01-supply = <...>; vinldo23-supply = <...>; vinldo4-supply = <...>; diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt new file mode 100644 index 0000000000000000000000000000000000000000..0b2503ab0a056f3dd2825207aef79aad7dac6267 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/marvel.txt @@ -0,0 +1,14 @@ +* Marvell Orion Watchdog Time + +Required Properties: + +- Compatibility : "marvell,orion-wdt" +- reg : Address of the timer registers + +Example: + + wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + status = "okay"; + }; diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb index c4d963a67d6ffc1ec7e54b8d31cc7d9b41537796..8eb92264ee047163caa25738a30c09ad04d20fcc 100644 --- a/Documentation/dvb/README.dvb-usb +++ b/Documentation/dvb/README.dvb-usb @@ -30,7 +30,7 @@ with the device via the bus. The connection between the DVB-API-functionality is done via callbacks, assigned in a static device-description (struct dvb_usb_device) each device-driver has to have. -For an example have a look in drivers/media/dvb/dvb-usb/vp7045*. +For an example have a look in drivers/media/usb/dvb-usb/vp7045*. Objective is to migrate all the usb-devices (dibusb, cinergyT2, maybe the ttusb; flexcop-usb already benefits from the generic flexcop-device) to use diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index 12d3952e83d5b0305c26afba116047aabf3c2850..32bc56b13b1c7c527669d0a2525486f46115faee 100755 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -116,7 +116,7 @@ sub tda10045 { sub tda10046 { my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip"; - my $url = "http://www.tt-download.com/download/updates/219/$sourcefile"; + my $url = "http://technotrend.com.ua/download/software/219/$sourcefile"; my $hash = "6a7e1e2f2644b162ff0502367553c72d"; my $outfile = "dvb-fe-tda10046.fw"; my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 09b132dd062d29fec269f5e18406e0f7f3a196b7..28179cfdace6daf0cd10c9a04ab3a7b33127feef 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -6,6 +6,15 @@ be removed from this file. The suggested deprecation period is 3 releases. --------------------------- +What: support for i.mx25 in mx2_camera.c +When: v3.8 +Why: it's been broken for a year. Furthermore, i.MX25 video capture + HW doesn't have much in common with i.MX27. A separate driver + will be needed for it. +Who: Javier Martin + +--------------------------- + What: ddebug_query="query" boot cmdline param When: v3.8 Why: obsoleted by dyndbg="query" and module.dyndbg="query" @@ -13,6 +22,14 @@ Who: Jim Cromie , Jason Baron --------------------------- +What: /proc/sys/vm/nr_pdflush_threads +When: 2012 +Why: Since pdflush is deprecated, the interface exported in /proc/sys/vm/ + should be removed. +Who: Wanpeng Li + +--------------------------- + What: CONFIG_APM_CPU_IDLE, and its ability to call APM BIOS in idle When: 2012 Why: This optional sub-feature of APM is of dubious reliability, @@ -70,20 +87,6 @@ Who: Luis R. Rodriguez --------------------------- -What: IRQF_SAMPLE_RANDOM -Check: IRQF_SAMPLE_RANDOM -When: July 2009 - -Why: Many of IRQF_SAMPLE_RANDOM users are technically bogus as entropy - sources in the kernel's current entropy model. To resolve this, every - input point to the kernel's entropy pool needs to better document the - type of entropy source it actually is. This will be replaced with - additional add_*_randomness functions in drivers/char/random.c - -Who: Robin Getz & Matt Mackall - ---------------------------- - What: The ieee80211_regdom module parameter When: March 2010 / desktop catchup @@ -585,7 +588,7 @@ Why: KVM tracepoints provide mostly equivalent information in a much more ---------------------------- What: at91-mci driver ("CONFIG_MMC_AT91") -When: 3.7 +When: 3.8 Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support was added to atmel-mci as a first step to support more chips. Then at91-mci was kept only for old IP versions (on at91rm9200 and @@ -632,3 +635,23 @@ Why: New drivers should use new V4L2_CAP_VIDEO_M2M capability flag Who: Sylwester Nawrocki ---------------------------- + +What: OMAP private DMA implementation +When: 2013 +Why: We have a DMA engine implementation; all users should be updated + to use this rather than persisting with the old APIs. The old APIs + block merging the old DMA engine implementation into the DMA + engine driver. +Who: Russell King , + Santosh Shilimkar + +---------------------------- + +What: Remove deprecated DV timings capability defines V4L2_IN_CAP_CUSTOM_TIMINGS + and V4L2_OUT_CAP_CUSTOM_TIMINGS. +When: 3.9 +Why: These defines have been replaced by V4L2_IN_CAP_TIMINGS and + V4L2_OUT_CAP_TIMINGS respectively. +Who: Hans Verkuil + +---------------------------- diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index e0cce2a5f820a6327f9ea1558717434c490e8aae..e540a24e5d069d4f6372adaabfa792ff11897ca9 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -114,7 +114,6 @@ prototypes: int (*drop_inode) (struct inode *); void (*evict_inode) (struct inode *); void (*put_super) (struct super_block *); - void (*write_super) (struct super_block *); int (*sync_fs)(struct super_block *sb, int wait); int (*freeze_fs) (struct super_block *); int (*unfreeze_fs) (struct super_block *); @@ -136,10 +135,9 @@ write_inode: drop_inode: !!!inode->i_lock!!! evict_inode: put_super: write -write_super: read sync_fs: read -freeze_fs: read -unfreeze_fs: read +freeze_fs: write +unfreeze_fs: write statfs: maybe(read) (see below) remount_fs: write umount_begin: no @@ -206,6 +204,8 @@ prototypes: int (*launder_page)(struct page *); int (*is_partially_uptodate)(struct page *, read_descriptor_t *, unsigned long); int (*error_remove_page)(struct address_space *, struct page *); + int (*swap_activate)(struct file *); + int (*swap_deactivate)(struct file *); locking rules: All except set_page_dirty and freepage may block @@ -229,6 +229,8 @@ migratepage: yes (both) launder_page: yes is_partially_uptodate: yes error_remove_page: yes +swap_activate: no +swap_deactivate: no ->write_begin(), ->write_end(), ->sync_page() and ->readpage() may be called from the request handler (/dev/loop). @@ -330,6 +332,15 @@ cleaned, or an error value if not. Note that in order to prevent the page getting mapped back in and redirtied, it needs to be kept locked across the entire operation. + ->swap_activate will be called with a non-zero argument on +files backing (non block device backed) swapfiles. A return value +of zero indicates success, in which case this file can be used for +backing swapspace. The swapspace operations will be proxied to the +address space operations. + + ->swap_deactivate() will be called in the sys_swapoff() +path after ->swap_activate() returned success. + ----------------------- file_lock_operations ------------------------------ prototypes: void (*fl_copy_lock)(struct file_lock *, struct file_lock *); @@ -346,7 +357,6 @@ prototypes: int (*lm_compare_owner)(struct file_lock *, struct file_lock *); void (*lm_notify)(struct file_lock *); /* unblock callback */ int (*lm_grant)(struct file_lock *, struct file_lock *, int); - void (*lm_release_private)(struct file_lock *); void (*lm_break)(struct file_lock *); /* break_lease callback */ int (*lm_change)(struct file_lock **, int); @@ -355,7 +365,6 @@ locking rules: lm_compare_owner: yes no lm_notify: yes no lm_grant: no no -lm_release_private: maybe no lm_break: yes no lm_change yes no diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index 2bef2b3843d1d4e09ead99fed121de4b2ab92db2..0742feebc6e221f9d79e400adab5feaba23098de 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -94,9 +94,8 @@ protected. --- [mandatory] -BKL is also moved from around sb operations. ->write_super() Is now called -without BKL held. BKL should have been shifted into individual fs sb_op -functions. If you don't need it, remove it. +BKL is also moved from around sb operations. BKL should have been shifted into +individual fs sb_op functions. If you don't need it, remove it. --- [informational] diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt index ead764b2728f8a20731ece907475b1966a35ce86..de1e6c4dccff047766f1bfc1801319ef28cdf0d1 100644 --- a/Documentation/filesystems/vfat.txt +++ b/Documentation/filesystems/vfat.txt @@ -137,6 +137,17 @@ errors=panic|continue|remount-ro without doing anything or remount the partition in read-only mode (default behavior). +discard -- If set, issues discard/TRIM commands to the block + device when blocks are freed. This is useful for SSD devices + and sparse/thinly-provisoned LUNs. + +nfs -- This option maintains an index (cache) of directory + inodes by i_logstart which is used by the nfs-related code to + improve look-ups. + + Enable this only if you want to export the FAT filesystem + over NFS + : 0,1,yes,no,true,false TODO diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index aa754e01464e1c71f55869da9d5222ef763518d7..2ee133e030c3f51521321afd62d5dd3b1d1650fb 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -216,7 +216,6 @@ struct super_operations { void (*drop_inode) (struct inode *); void (*delete_inode) (struct inode *); void (*put_super) (struct super_block *); - void (*write_super) (struct super_block *); int (*sync_fs)(struct super_block *sb, int wait); int (*freeze_fs) (struct super_block *); int (*unfreeze_fs) (struct super_block *); @@ -273,9 +272,6 @@ or bottom half). put_super: called when the VFS wishes to free the superblock (i.e. unmount). This is called with the superblock lock held - write_super: called when the VFS superblock needs to be written to - disc. This method is optional - sync_fs: called when VFS is writing out all dirty data associated with a superblock. The second parameter indicates whether the method should wait until the write out has been completed. Optional. @@ -592,6 +588,8 @@ struct address_space_operations { int (*migratepage) (struct page *, struct page *); int (*launder_page) (struct page *); int (*error_remove_page) (struct mapping *mapping, struct page *page); + int (*swap_activate)(struct file *); + int (*swap_deactivate)(struct file *); }; writepage: called by the VM to write a dirty page to backing store. @@ -760,6 +758,16 @@ struct address_space_operations { Setting this implies you deal with pages going away under you, unless you have them locked or reference counts increased. + swap_activate: Called when swapon is used on a file to allocate + space if necessary and pin the block lookup information in + memory. A return value of zero indicates success, + in which case this file can be used to back swapspace. The + swapspace operations will be proxied to this address space's + ->swap_{out,in} methods. + + swap_deactivate: Called during swapoff on files where swap_activate + was successful. + The File Object =============== diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 615142da4ef64c6ec8ae87893425046a1564e786..157416e78cc4168859c89c88b13bcfeb71c4848f 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -21,6 +21,7 @@ Supported adapters: * Intel DH89xxCC (PCH) * Intel Panther Point (PCH) * Intel Lynx Point (PCH) + * Intel Lynx Point-LP (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 915f28c470e94644f24ef842abb68ba7cbed97af..2152b0e7237db87a60ef4897a949974f0c2b8d2d 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -88,6 +88,7 @@ Code Seq#(hex) Include File Comments and kernel/power/user.c '8' all SNP8023 advanced NIC card +';' 64-7F linux/vfio.h '@' 00-0F linux/radeonfb.h conflict! '@' 00-0F drivers/video/aty/aty128fb.c conflict! 'A' 00-1F linux/apm_bios.h conflict! @@ -177,7 +178,6 @@ Code Seq#(hex) Include File Comments 'V' C0 linux/ivtv.h conflict! 'V' C0 media/davinci/vpfe_capture.h conflict! 'V' C0 media/si4713.h conflict! -'V' C0-CF drivers/media/video/mxb.h conflict! 'W' 00-1F linux/watchdog.h conflict! 'W' 00-1F linux/wanrouter.h conflict! 'W' 00-3F sound/asound.h conflict! @@ -203,8 +203,6 @@ Code Seq#(hex) Include File Comments 'c' A0-AF arch/x86/include/asm/msr.h conflict! 'd' 00-FF linux/char/drm/drm/h conflict! 'd' 02-40 pcmcia/ds.h conflict! -'d' 10-3F drivers/media/video/dabusb.h conflict! -'d' C0-CF drivers/media/video/saa7191.h conflict! 'd' F0-FF linux/digi1.h 'e' all linux/digi1.h conflict! 'e' 00-1F drivers/net/irda/irtty-sir.h conflict! @@ -266,9 +264,7 @@ Code Seq#(hex) Include File Comments 'v' 00-1F linux/ext2_fs.h conflict! 'v' 00-1F linux/fs.h conflict! 'v' 00-0F linux/sonypi.h conflict! -'v' C0-DF media/pwc-ioctl.h conflict! 'v' C0-FF linux/meye.h conflict! -'v' D0-DF drivers/media/video/cpia2/cpia2dev.h conflict! 'w' all CERN SCI driver 'y' 00-1F packet based user level communications diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.txt index 0bf25eebce948b4a330fe8868db387e742108278..4ebbfc3f1c6ea803b1cb7b5b71c1e98c6d8e3f17 100644 --- a/Documentation/laptops/laptop-mode.txt +++ b/Documentation/laptops/laptop-mode.txt @@ -262,9 +262,9 @@ MINIMUM_BATTERY_MINUTES=10 # # Allowed dirty background ratio, in percent. Once DIRTY_RATIO has been -# exceeded, the kernel will wake pdflush which will then reduce the amount -# of dirty memory to dirty_background_ratio. Set this nice and low, so once -# some writeout has commenced, we do a lot of it. +# exceeded, the kernel will wake flusher threads which will then reduce the +# amount of dirty memory to dirty_background_ratio. Set this nice and low, +# so once some writeout has commenced, we do a lot of it. # #DIRTY_BACKGROUND_RATIO=5 @@ -384,9 +384,9 @@ CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'} # # Allowed dirty background ratio, in percent. Once DIRTY_RATIO has been -# exceeded, the kernel will wake pdflush which will then reduce the amount -# of dirty memory to dirty_background_ratio. Set this nice and low, so once -# some writeout has commenced, we do a lot of it. +# exceeded, the kernel will wake flusher threads which will then reduce the +# amount of dirty memory to dirty_background_ratio. Set this nice and low, +# so once some writeout has commenced, we do a lot of it. # DIRTY_BACKGROUND_RATIO=${DIRTY_BACKGROUND_RATIO:-'5'} diff --git a/Documentation/networking/netconsole.txt b/Documentation/networking/netconsole.txt index 8d022073e3ef53933898c6756c3abf6d50104a79..2e9e0ae2cd453dc3ac0a605c1a40baf1096cf42f 100644 --- a/Documentation/networking/netconsole.txt +++ b/Documentation/networking/netconsole.txt @@ -51,8 +51,23 @@ Built-in netconsole starts immediately after the TCP stack is initialized and attempts to bring up the supplied dev at the supplied address. -The remote host can run either 'netcat -u -l -p ', -'nc -l -u ' or syslogd. +The remote host has several options to receive the kernel messages, +for example: + +1) syslogd + +2) netcat + + On distributions using a BSD-based netcat version (e.g. Fedora, + openSUSE and Ubuntu) the listening port must be specified without + the -p switch: + + 'nc -u -l -p ' / 'nc -u -l ' or + 'netcat -u -l -p ' / 'netcat -u -l ' + +3) socat + + 'socat udp-recv: -' Dynamic reconfiguration: ======================== diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index e40f4b4e1977c73d1f6984c705c1065878ad4ad4..1479aca2374441976c14668b7bc7e523fbb2211f 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -840,9 +840,9 @@ static unsigned long i2c_pin_configs[] = { static struct pinctrl_map __initdata mapping[] = { PIN_MAP_MUX_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", "i2c0"), - PIN_MAP_MUX_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs), - PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs), - PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs), + PIN_MAP_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs), + PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs), + PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs), }; Finally, some devices expect the mapping table to contain certain specific diff --git a/Documentation/security/Yama.txt b/Documentation/security/Yama.txt index e369de2d48cdf2f24c96a8373b8506d10800f28f..dd908cf64ecfcb7a809685a7eb2beb508cb30815 100644 --- a/Documentation/security/Yama.txt +++ b/Documentation/security/Yama.txt @@ -46,14 +46,13 @@ restrictions, it can call prctl(PR_SET_PTRACER, PR_SET_PTRACER_ANY, ...) so that any otherwise allowed process (even those in external pid namespaces) may attach. -These restrictions do not change how ptrace via PTRACE_TRACEME operates. - -The sysctl settings are: +The sysctl settings (writable only with CAP_SYS_PTRACE) are: 0 - classic ptrace permissions: a process can PTRACE_ATTACH to any other process running under the same uid, as long as it is dumpable (i.e. did not transition uids, start privileged, or have called - prctl(PR_SET_DUMPABLE...) already). + prctl(PR_SET_DUMPABLE...) already). Similarly, PTRACE_TRACEME is + unchanged. 1 - restricted ptrace: a process must have a predefined relationship with the inferior it wants to call PTRACE_ATTACH on. By default, @@ -61,12 +60,13 @@ The sysctl settings are: classic criteria is also met. To change the relationship, an inferior can call prctl(PR_SET_PTRACER, debugger, ...) to declare an allowed debugger PID to call PTRACE_ATTACH on the inferior. + Using PTRACE_TRACEME is unchanged. 2 - admin-only attach: only processes with CAP_SYS_PTRACE may use ptrace - with PTRACE_ATTACH. + with PTRACE_ATTACH, or through children calling PTRACE_TRACEME. -3 - no attach: no processes may use ptrace with PTRACE_ATTACH. Once set, - this sysctl cannot be changed to a lower value. +3 - no attach: no processes may use ptrace with PTRACE_ATTACH nor via + PTRACE_TRACEME. Once set, this sysctl value cannot be changed. The original children-only logic was based on the restrictions in grsecurity. diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 7456360e161cbe2962eb4850f05ef0cf45c30657..a92bba8168435bc731ce8db34530d55639fa8def 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -53,6 +53,7 @@ ALC882/883/885/888/889 acer-aspire-8930g Acer Aspire 8330G/6935G acer-aspire Acer Aspire others inv-dmic Inverted internal mic workaround + no-primary-hp VAIO Z workaround (for fixed speaker DAC) ALC861/660 ========== @@ -273,6 +274,10 @@ STAC92HD83* dell-s14 Dell laptop dell-vostro-3500 Dell Vostro 3500 laptop hp-dv7-4000 HP dv-7 4000 + hp_cNB11_intquad HP CNB models with 4 speakers + hp-zephyr HP Zephyr + hp-led HP with broken BIOS for mute LED + hp-inv-led HP with broken BIOS for inverted mute LED auto BIOS setup (default) STAC9872 diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt index 8c235b6e42460c5ed7eb485a1898cbcfb97793a0..88152f214f48cb69c643d4bf2ff2ac9a61ad2eb0 100644 --- a/Documentation/sysctl/fs.txt +++ b/Documentation/sysctl/fs.txt @@ -32,6 +32,8 @@ Currently, these files are in /proc/sys/fs: - nr_open - overflowuid - overflowgid +- protected_hardlinks +- protected_symlinks - suid_dumpable - super-max - super-nr @@ -157,6 +159,46 @@ The default is 65534. ============================================================== +protected_hardlinks: + +A long-standing class of security issues is the hardlink-based +time-of-check-time-of-use race, most commonly seen in world-writable +directories like /tmp. The common method of exploitation of this flaw +is to cross privilege boundaries when following a given hardlink (i.e. a +root process follows a hardlink created by another user). Additionally, +on systems without separated partitions, this stops unauthorized users +from "pinning" vulnerable setuid/setgid files against being upgraded by +the administrator, or linking to special files. + +When set to "0", hardlink creation behavior is unrestricted. + +When set to "1" hardlinks cannot be created by users if they do not +already own the source file, or do not have read/write access to it. + +This protection is based on the restrictions in Openwall and grsecurity. + +============================================================== + +protected_symlinks: + +A long-standing class of security issues is the symlink-based +time-of-check-time-of-use race, most commonly seen in world-writable +directories like /tmp. The common method of exploitation of this flaw +is to cross privilege boundaries when following a given symlink (i.e. a +root process follows a symlink belonging to another user). For a likely +incomplete list of hundreds of examples across the years, please see: +http://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=/tmp + +When set to "0", symlink following behavior is unrestricted. + +When set to "1" symlinks are permitted to be followed only when outside +a sticky world-writable directory, or when the uid of the symlink and +follower match, or when the directory owner matches the symlink's owner. + +This protection is based on the restrictions in Openwall and grsecurity. + +============================================================== + suid_dumpable: This value can be used to query and set the core dump mode for setuid diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 96f0ee825bed3e71fe9758156ee8b575389d7bba..078701fdbd4dd936dd485737abe7b5b60e554604 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -42,7 +42,6 @@ Currently, these files are in /proc/sys/vm: - mmap_min_addr - nr_hugepages - nr_overcommit_hugepages -- nr_pdflush_threads - nr_trim_pages (only if CONFIG_MMU=n) - numa_zonelist_order - oom_dump_tasks @@ -77,8 +76,8 @@ huge pages although processes will also directly compact memory as required. dirty_background_bytes -Contains the amount of dirty memory at which the pdflush background writeback -daemon will start writeback. +Contains the amount of dirty memory at which the background kernel +flusher threads will start writeback. Note: dirty_background_bytes is the counterpart of dirty_background_ratio. Only one of them may be specified at a time. When one sysctl is written it is @@ -90,7 +89,7 @@ other appears as 0 when read. dirty_background_ratio Contains, as a percentage of total system memory, the number of pages at which -the pdflush background writeback daemon will start writing out dirty data. +the background kernel flusher threads will start writing out dirty data. ============================================================== @@ -113,9 +112,9 @@ retained. dirty_expire_centisecs This tunable is used to define when dirty data is old enough to be eligible -for writeout by the pdflush daemons. It is expressed in 100'ths of a second. -Data which has been dirty in-memory for longer than this interval will be -written out next time a pdflush daemon wakes up. +for writeout by the kernel flusher threads. It is expressed in 100'ths +of a second. Data which has been dirty in-memory for longer than this +interval will be written out next time a flusher thread wakes up. ============================================================== @@ -129,7 +128,7 @@ data. dirty_writeback_centisecs -The pdflush writeback daemons will periodically wake up and write `old' data +The kernel flusher threads will periodically wake up and write `old' data out to disk. This tunable expresses the interval between those wakeups, in 100'ths of a second. @@ -426,16 +425,6 @@ See Documentation/vm/hugetlbpage.txt ============================================================== -nr_pdflush_threads - -The current number of pdflush threads. This value is read-only. -The value changes according to the number of dirty pages in the system. - -When necessary, additional pdflush threads are created, one per second, up to -nr_pdflush_threads_max. - -============================================================== - nr_trim_pages This is available only on NOMMU kernels. @@ -502,9 +491,10 @@ oom_dump_tasks Enables a system-wide task dump (excluding kernel threads) to be produced when the kernel performs an OOM-killing and includes such -information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and -name. This is helpful to determine why the OOM killer was invoked -and to identify the rogue task that caused it. +information as pid, uid, tgid, vm size, rss, nr_ptes, swapents, +oom_score_adj score, and name. This is helpful to determine why the +OOM killer was invoked, to identify the rogue task that caused it, +and to determine why the OOM killer chose the task it did to kill. If this is set to zero, this information is suppressed. On very large systems with thousands of tasks it may not be feasible to dump @@ -574,16 +564,24 @@ of physical RAM. See above. page-cluster -page-cluster controls the number of pages which are written to swap in -a single attempt. The swap I/O size. +page-cluster controls the number of pages up to which consecutive pages +are read in from swap in a single attempt. This is the swap counterpart +to page cache readahead. +The mentioned consecutivity is not in terms of virtual/physical addresses, +but consecutive on swap space - that means they were swapped out together. It is a logarithmic value - setting it to zero means "1 page", setting it to 1 means "2 pages", setting it to 2 means "4 pages", etc. +Zero disables swap readahead completely. The default value is three (eight pages at a time). There may be some small benefits in tuning this to a different value if your workload is swap-intensive. +Lower values mean lower latencies for initial faults, but at the same time +extra faults and I/O delays for following faults if they would have been part of +that consecutive pages readahead would have brought in. + ============================================================= panic_on_oom diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt new file mode 100644 index 0000000000000000000000000000000000000000..8eda3635a17da0e8d610a01e88d928a68f833f93 --- /dev/null +++ b/Documentation/vfio.txt @@ -0,0 +1,314 @@ +VFIO - "Virtual Function I/O"[1] +------------------------------------------------------------------------------- +Many modern system now provide DMA and interrupt remapping facilities +to help ensure I/O devices behave within the boundaries they've been +allotted. This includes x86 hardware with AMD-Vi and Intel VT-d, +POWER systems with Partitionable Endpoints (PEs) and embedded PowerPC +systems such as Freescale PAMU. The VFIO driver is an IOMMU/device +agnostic framework for exposing direct device access to userspace, in +a secure, IOMMU protected environment. In other words, this allows +safe[2], non-privileged, userspace drivers. + +Why do we want that? Virtual machines often make use of direct device +access ("device assignment") when configured for the highest possible +I/O performance. From a device and host perspective, this simply +turns the VM into a userspace driver, with the benefits of +significantly reduced latency, higher bandwidth, and direct use of +bare-metal device drivers[3]. + +Some applications, particularly in the high performance computing +field, also benefit from low-overhead, direct device access from +userspace. Examples include network adapters (often non-TCP/IP based) +and compute accelerators. Prior to VFIO, these drivers had to either +go through the full development cycle to become proper upstream +driver, be maintained out of tree, or make use of the UIO framework, +which has no notion of IOMMU protection, limited interrupt support, +and requires root privileges to access things like PCI configuration +space. + +The VFIO driver framework intends to unify these, replacing both the +KVM PCI specific device assignment code as well as provide a more +secure, more featureful userspace driver environment than UIO. + +Groups, Devices, and IOMMUs +------------------------------------------------------------------------------- + +Devices are the main target of any I/O driver. Devices typically +create a programming interface made up of I/O access, interrupts, +and DMA. Without going into the details of each of these, DMA is +by far the most critical aspect for maintaining a secure environment +as allowing a device read-write access to system memory imposes the +greatest risk to the overall system integrity. + +To help mitigate this risk, many modern IOMMUs now incorporate +isolation properties into what was, in many cases, an interface only +meant for translation (ie. solving the addressing problems of devices +with limited address spaces). With this, devices can now be isolated +from each other and from arbitrary memory access, thus allowing +things like secure direct assignment of devices into virtual machines. + +This isolation is not always at the granularity of a single device +though. Even when an IOMMU is capable of this, properties of devices, +interconnects, and IOMMU topologies can each reduce this isolation. +For instance, an individual device may be part of a larger multi- +function enclosure. While the IOMMU may be able to distinguish +between devices within the enclosure, the enclosure may not require +transactions between devices to reach the IOMMU. Examples of this +could be anything from a multi-function PCI device with backdoors +between functions to a non-PCI-ACS (Access Control Services) capable +bridge allowing redirection without reaching the IOMMU. Topology +can also play a factor in terms of hiding devices. A PCIe-to-PCI +bridge masks the devices behind it, making transaction appear as if +from the bridge itself. Obviously IOMMU design plays a major factor +as well. + +Therefore, while for the most part an IOMMU may have device level +granularity, any system is susceptible to reduced granularity. The +IOMMU API therefore supports a notion of IOMMU groups. A group is +a set of devices which is isolatable from all other devices in the +system. Groups are therefore the unit of ownership used by VFIO. + +While the group is the minimum granularity that must be used to +ensure secure user access, it's not necessarily the preferred +granularity. In IOMMUs which make use of page tables, it may be +possible to share a set of page tables between different groups, +reducing the overhead both to the platform (reduced TLB thrashing, +reduced duplicate page tables), and to the user (programming only +a single set of translations). For this reason, VFIO makes use of +a container class, which may hold one or more groups. A container +is created by simply opening the /dev/vfio/vfio character device. + +On its own, the container provides little functionality, with all +but a couple version and extension query interfaces locked away. +The user needs to add a group into the container for the next level +of functionality. To do this, the user first needs to identify the +group associated with the desired device. This can be done using +the sysfs links described in the example below. By unbinding the +device from the host driver and binding it to a VFIO driver, a new +VFIO group will appear for the group as /dev/vfio/$GROUP, where +$GROUP is the IOMMU group number of which the device is a member. +If the IOMMU group contains multiple devices, each will need to +be bound to a VFIO driver before operations on the VFIO group +are allowed (it's also sufficient to only unbind the device from +host drivers if a VFIO driver is unavailable; this will make the +group available, but not that particular device). TBD - interface +for disabling driver probing/locking a device. + +Once the group is ready, it may be added to the container by opening +the VFIO group character device (/dev/vfio/$GROUP) and using the +VFIO_GROUP_SET_CONTAINER ioctl, passing the file descriptor of the +previously opened container file. If desired and if the IOMMU driver +supports sharing the IOMMU context between groups, multiple groups may +be set to the same container. If a group fails to set to a container +with existing groups, a new empty container will need to be used +instead. + +With a group (or groups) attached to a container, the remaining +ioctls become available, enabling access to the VFIO IOMMU interfaces. +Additionally, it now becomes possible to get file descriptors for each +device within a group using an ioctl on the VFIO group file descriptor. + +The VFIO device API includes ioctls for describing the device, the I/O +regions and their read/write/mmap offsets on the device descriptor, as +well as mechanisms for describing and registering interrupt +notifications. + +VFIO Usage Example +------------------------------------------------------------------------------- + +Assume user wants to access PCI device 0000:06:0d.0 + +$ readlink /sys/bus/pci/devices/0000:06:0d.0/iommu_group +../../../../kernel/iommu_groups/26 + +This device is therefore in IOMMU group 26. This device is on the +pci bus, therefore the user will make use of vfio-pci to manage the +group: + +# modprobe vfio-pci + +Binding this device to the vfio-pci driver creates the VFIO group +character devices for this group: + +$ lspci -n -s 0000:06:0d.0 +06:0d.0 0401: 1102:0002 (rev 08) +# echo 0000:06:0d.0 > /sys/bus/pci/devices/0000:06:0d.0/driver/unbind +# echo 1102 0002 > /sys/bus/pci/drivers/vfio-pci/new_id + +Now we need to look at what other devices are in the group to free +it for use by VFIO: + +$ ls -l /sys/bus/pci/devices/0000:06:0d.0/iommu_group/devices +total 0 +lrwxrwxrwx. 1 root root 0 Apr 23 16:13 0000:00:1e.0 -> + ../../../../devices/pci0000:00/0000:00:1e.0 +lrwxrwxrwx. 1 root root 0 Apr 23 16:13 0000:06:0d.0 -> + ../../../../devices/pci0000:00/0000:00:1e.0/0000:06:0d.0 +lrwxrwxrwx. 1 root root 0 Apr 23 16:13 0000:06:0d.1 -> + ../../../../devices/pci0000:00/0000:00:1e.0/0000:06:0d.1 + +This device is behind a PCIe-to-PCI bridge[4], therefore we also +need to add device 0000:06:0d.1 to the group following the same +procedure as above. Device 0000:00:1e.0 is a bridge that does +not currently have a host driver, therefore it's not required to +bind this device to the vfio-pci driver (vfio-pci does not currently +support PCI bridges). + +The final step is to provide the user with access to the group if +unprivileged operation is desired (note that /dev/vfio/vfio provides +no capabilities on its own and is therefore expected to be set to +mode 0666 by the system). + +# chown user:user /dev/vfio/26 + +The user now has full access to all the devices and the iommu for this +group and can access them as follows: + + int container, group, device, i; + struct vfio_group_status group_status = + { .argsz = sizeof(group_status) }; + struct vfio_iommu_x86_info iommu_info = { .argsz = sizeof(iommu_info) }; + struct vfio_iommu_x86_dma_map dma_map = { .argsz = sizeof(dma_map) }; + struct vfio_device_info device_info = { .argsz = sizeof(device_info) }; + + /* Create a new container */ + container = open("/dev/vfio/vfio, O_RDWR); + + if (ioctl(container, VFIO_GET_API_VERSION) != VFIO_API_VERSION) + /* Unknown API version */ + + if (!ioctl(container, VFIO_CHECK_EXTENSION, VFIO_X86_IOMMU)) + /* Doesn't support the IOMMU driver we want. */ + + /* Open the group */ + group = open("/dev/vfio/26", O_RDWR); + + /* Test the group is viable and available */ + ioctl(group, VFIO_GROUP_GET_STATUS, &group_status); + + if (!(group_status.flags & VFIO_GROUP_FLAGS_VIABLE)) + /* Group is not viable (ie, not all devices bound for vfio) */ + + /* Add the group to the container */ + ioctl(group, VFIO_GROUP_SET_CONTAINER, &container); + + /* Enable the IOMMU model we want */ + ioctl(container, VFIO_SET_IOMMU, VFIO_X86_IOMMU) + + /* Get addition IOMMU info */ + ioctl(container, VFIO_IOMMU_GET_INFO, &iommu_info); + + /* Allocate some space and setup a DMA mapping */ + dma_map.vaddr = mmap(0, 1024 * 1024, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); + dma_map.size = 1024 * 1024; + dma_map.iova = 0; /* 1MB starting at 0x0 from device view */ + dma_map.flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE; + + ioctl(container, VFIO_IOMMU_MAP_DMA, &dma_map); + + /* Get a file descriptor for the device */ + device = ioctl(group, VFIO_GROUP_GET_DEVICE_FD, "0000:06:0d.0"); + + /* Test and setup the device */ + ioctl(device, VFIO_DEVICE_GET_INFO, &device_info); + + for (i = 0; i < device_info.num_regions; i++) { + struct vfio_region_info reg = { .argsz = sizeof(reg) }; + + reg.index = i; + + ioctl(device, VFIO_DEVICE_GET_REGION_INFO, ®); + + /* Setup mappings... read/write offsets, mmaps + * For PCI devices, config space is a region */ + } + + for (i = 0; i < device_info.num_irqs; i++) { + struct vfio_irq_info irq = { .argsz = sizeof(irq) }; + + irq.index = i; + + ioctl(device, VFIO_DEVICE_GET_IRQ_INFO, ®); + + /* Setup IRQs... eventfds, VFIO_DEVICE_SET_IRQS */ + } + + /* Gratuitous device reset and go... */ + ioctl(device, VFIO_DEVICE_RESET); + +VFIO User API +------------------------------------------------------------------------------- + +Please see include/linux/vfio.h for complete API documentation. + +VFIO bus driver API +------------------------------------------------------------------------------- + +VFIO bus drivers, such as vfio-pci make use of only a few interfaces +into VFIO core. When devices are bound and unbound to the driver, +the driver should call vfio_add_group_dev() and vfio_del_group_dev() +respectively: + +extern int vfio_add_group_dev(struct iommu_group *iommu_group, + struct device *dev, + const struct vfio_device_ops *ops, + void *device_data); + +extern void *vfio_del_group_dev(struct device *dev); + +vfio_add_group_dev() indicates to the core to begin tracking the +specified iommu_group and register the specified dev as owned by +a VFIO bus driver. The driver provides an ops structure for callbacks +similar to a file operations structure: + +struct vfio_device_ops { + int (*open)(void *device_data); + void (*release)(void *device_data); + ssize_t (*read)(void *device_data, char __user *buf, + size_t count, loff_t *ppos); + ssize_t (*write)(void *device_data, const char __user *buf, + size_t size, loff_t *ppos); + long (*ioctl)(void *device_data, unsigned int cmd, + unsigned long arg); + int (*mmap)(void *device_data, struct vm_area_struct *vma); +}; + +Each function is passed the device_data that was originally registered +in the vfio_add_group_dev() call above. This allows the bus driver +an easy place to store its opaque, private data. The open/release +callbacks are issued when a new file descriptor is created for a +device (via VFIO_GROUP_GET_DEVICE_FD). The ioctl interface provides +a direct pass through for VFIO_DEVICE_* ioctls. The read/write/mmap +interfaces implement the device region access defined by the device's +own VFIO_DEVICE_GET_REGION_INFO ioctl. + +------------------------------------------------------------------------------- + +[1] VFIO was originally an acronym for "Virtual Function I/O" in its +initial implementation by Tom Lyon while as Cisco. We've since +outgrown the acronym, but it's catchy. + +[2] "safe" also depends upon a device being "well behaved". It's +possible for multi-function devices to have backdoors between +functions and even for single function devices to have alternative +access to things like PCI config space through MMIO registers. To +guard against the former we can include additional precautions in the +IOMMU driver to group multi-function PCI devices together +(iommu=group_mf). The latter we can't prevent, but the IOMMU should +still provide isolation. For PCI, SR-IOV Virtual Functions are the +best indicator of "well behaved", as these are designed for +virtualization usage models. + +[3] As always there are trade-offs to virtual machine device +assignment that are beyond the scope of VFIO. It's expected that +future IOMMU technologies will reduce some, but maybe not all, of +these trade-offs. + +[4] In this case the device is below a PCI bridge, so transactions +from either function of the device are indistinguishable to the iommu: + +-[0000:00]-+-1e.0-[06]--+-0d.0 + \-0d.1 + +00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 652aecd131998a7d2958a6a7cc2978e0eeeaa9ae..1299b5e82d7f42450e12eef450dbf6a650823428 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -35,3 +35,4 @@ 34 -> TerraTec Cinergy T PCIe Dual [153b:117e] 35 -> TeVii S471 [d471:9022] 36 -> Hauppauge WinTV-HVR1255 [0070:2259] + 37 -> Prof Revolution DVB-S2 8000 [8000:3034] diff --git a/Documentation/video4linux/CQcam.txt b/Documentation/video4linux/CQcam.txt index 6e680fec1e9c1d5e43a39e3e160572beb7c1b4c2..0b69e4ee8e312d8dd8e26489b706f83aa6851382 100644 --- a/Documentation/video4linux/CQcam.txt +++ b/Documentation/video4linux/CQcam.txt @@ -18,7 +18,7 @@ Table of Contents 1.0 Introduction - The file ../../drivers/media/video/c-qcam.c is a device driver for + The file ../../drivers/media/parport/c-qcam.c is a device driver for the Logitech (nee Connectix) parallel port interface color CCD camera. This is a fairly inexpensive device for capturing images. Logitech does not currently provide information for developers, but many people diff --git a/Documentation/video4linux/README.davinci-vpbe b/Documentation/video4linux/README.davinci-vpbe index 7a460b0685bb6cfe8d2f631de9ee7a24d9031401..dc9a297f49c3fb0551294b0b89e9b70e0446b1b9 100644 --- a/Documentation/video4linux/README.davinci-vpbe +++ b/Documentation/video4linux/README.davinci-vpbe @@ -5,22 +5,22 @@ File partitioning ----------------- V4L2 display device driver - drivers/media/video/davinci/vpbe_display.c - drivers/media/video/davinci/vpbe_display.h + drivers/media/platform/davinci/vpbe_display.c + drivers/media/platform/davinci/vpbe_display.h VPBE display controller - drivers/media/video/davinci/vpbe.c - drivers/media/video/davinci/vpbe.h + drivers/media/platform/davinci/vpbe.c + drivers/media/platform/davinci/vpbe.h VPBE venc sub device driver - drivers/media/video/davinci/vpbe_venc.c - drivers/media/video/davinci/vpbe_venc.h - drivers/media/video/davinci/vpbe_venc_regs.h + drivers/media/platform/davinci/vpbe_venc.c + drivers/media/platform/davinci/vpbe_venc.h + drivers/media/platform/davinci/vpbe_venc_regs.h VPBE osd driver - drivers/media/video/davinci/vpbe_osd.c - drivers/media/video/davinci/vpbe_osd.h - drivers/media/video/davinci/vpbe_osd_regs.h + drivers/media/platform/davinci/vpbe_osd.c + drivers/media/platform/davinci/vpbe_osd.h + drivers/media/platform/davinci/vpbe_osd_regs.h Functional partitioning ----------------------- diff --git a/Documentation/video4linux/fimc.txt b/Documentation/video4linux/fimc.txt index eb049708f3e4b10b3464f6eb2f149651cd722893..fd02d9a4930a35bee8407b8fb701a617c7b93d5a 100644 --- a/Documentation/video4linux/fimc.txt +++ b/Documentation/video4linux/fimc.txt @@ -10,7 +10,7 @@ data from LCD controller (FIMD) through the SoC internal writeback data path. There are multiple FIMC instances in the SoCs (up to 4), having slightly different capabilities, like pixel alignment constraints, rotator availability, LCD writeback support, etc. The driver is located at -drivers/media/video/s5p-fimc directory. +drivers/media/platform/s5p-fimc directory. 1. Supported SoCs ================= @@ -36,21 +36,21 @@ Not currently supported: ===================== - media device driver - drivers/media/video/s5p-fimc/fimc-mdevice.[ch] + drivers/media/platform/s5p-fimc/fimc-mdevice.[ch] - camera capture video device driver - drivers/media/video/s5p-fimc/fimc-capture.c + drivers/media/platform/s5p-fimc/fimc-capture.c - MIPI-CSI2 receiver subdev - drivers/media/video/s5p-fimc/mipi-csis.[ch] + drivers/media/platform/s5p-fimc/mipi-csis.[ch] - video post-processor (mem-to-mem) - drivers/media/video/s5p-fimc/fimc-core.c + drivers/media/platform/s5p-fimc/fimc-core.c - common files - drivers/media/video/s5p-fimc/fimc-core.h - drivers/media/video/s5p-fimc/fimc-reg.h - drivers/media/video/s5p-fimc/regs-fimc.h + drivers/media/platform/s5p-fimc/fimc-core.h + drivers/media/platform/s5p-fimc/fimc-reg.h + drivers/media/platform/s5p-fimc/regs-fimc.h 4. User space interfaces ======================== diff --git a/Documentation/video4linux/omap3isp.txt b/Documentation/video4linux/omap3isp.txt index 5dd1439b61fd512b94b3404f959e824ab3816f4d..b9a9f83b1587f40008b3201890f973205d743f80 100644 --- a/Documentation/video4linux/omap3isp.txt +++ b/Documentation/video4linux/omap3isp.txt @@ -12,7 +12,7 @@ Introduction ============ This file documents the Texas Instruments OMAP 3 Image Signal Processor (ISP) -driver located under drivers/media/video/omap3isp. The original driver was +driver located under drivers/media/platform/omap3isp. The original driver was written by Texas Instruments but since that it has been rewritten (twice) at Nokia. diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt index 43da22b8972869c7d283d751674d6633d7cd822d..54270df99d5c2f1794c4fcd537eec05fd525d031 100644 --- a/Documentation/video4linux/v4l2-controls.txt +++ b/Documentation/video4linux/v4l2-controls.txt @@ -594,7 +594,11 @@ handler and finally add the first handler to the second. For example: v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...); v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...); v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...); - v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler); + v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler, NULL); + +The last argument to v4l2_ctrl_add_handler() is a filter function that allows +you to filter which controls will be added. Set it to NULL if you want to add +all controls. Or you can add specific controls to a handler: diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 89318be6c1d2117581b0dfbb5fc478370c8e0f5a..32bfe926e8d77717e67a9e485ca89b398f5c26a8 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -583,11 +583,19 @@ You should also set these fields: - name: set to something descriptive and unique. +- vfl_dir: set this to VFL_DIR_RX for capture devices (VFL_DIR_RX has value 0, + so this is normally already the default), set to VFL_DIR_TX for output + devices and VFL_DIR_M2M for mem2mem (codec) devices. + - fops: set to the v4l2_file_operations struct. - ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance (highly recommended to use this and it might become compulsory in the - future!), then set this to your v4l2_ioctl_ops struct. + future!), then set this to your v4l2_ioctl_ops struct. The vfl_type and + vfl_dir fields are used to disable ops that do not match the type/dir + combination. E.g. VBI ops are disabled for non-VBI nodes, and output ops + are disabled for a capture device. This makes it possible to provide + just one v4l2_ioctl_ops struct for both vbi and video nodes. - lock: leave to NULL if you want to do all the locking in the driver. Otherwise you give it a pointer to a struct mutex_lock and before the @@ -1054,4 +1062,4 @@ The first event type in the class is reserved for future use, so the first available event type is 'class base + 1'. An example on how the V4L2 events may be used can be found in the OMAP -3 ISP driver (drivers/media/video/omap3isp). +3 ISP driver (drivers/media/platform/omap3isp). diff --git a/Documentation/video4linux/videobuf b/Documentation/video4linux/videobuf index 1d00d7f15b8f730ee4de10ca2f9f28d5a529eadc..3ffe9e960b6f65e1be78e2480573389f1d940f6c 100644 --- a/Documentation/video4linux/videobuf +++ b/Documentation/video4linux/videobuf @@ -349,7 +349,7 @@ again. Developers who are interested in more information can go into the relevant header files; there are a few low-level functions declared there which have not been talked about here. Also worthwhile is the vivi driver -(drivers/media/video/vivi.c), which is maintained as an example of how V4L2 +(drivers/media/platform/vivi.c), which is maintained as an example of how V4L2 drivers should be written. Vivi only uses the vmalloc() API, but it's good enough to get started with. Note also that all of these calls are exported GPL-only, so they will not be available to non-GPL kernel modules. diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index f8551b3879f8442350a94b9f88377961ed8e8abd..4ac359b7aa176d1d1b61a100bc196332d842029b 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -299,11 +299,17 @@ map_hugetlb.c. ******************************************************************* /* - * hugepage-shm: see Documentation/vm/hugepage-shm.c + * map_hugetlb: see tools/testing/selftests/vm/map_hugetlb.c */ ******************************************************************* /* - * hugepage-mmap: see Documentation/vm/hugepage-mmap.c + * hugepage-shm: see tools/testing/selftests/vm/hugepage-shm.c + */ + +******************************************************************* + +/* + * hugepage-mmap: see tools/testing/selftests/vm/hugepage-mmap.c */ diff --git a/Documentation/w1/slaves/w1_therm b/Documentation/w1/slaves/w1_therm index 0403aaaba878edd18473ef7a536b38cfac4784c5..874a8ca93feb95c9783d9a41b3f89136b7485516 100644 --- a/Documentation/w1/slaves/w1_therm +++ b/Documentation/w1/slaves/w1_therm @@ -3,6 +3,7 @@ Kernel driver w1_therm Supported chips: * Maxim ds18*20 based temperature sensors. + * Maxim ds1825 based temperature sensors. Author: Evgeniy Polyakov @@ -15,6 +16,7 @@ supported family codes: W1_THERM_DS18S20 0x10 W1_THERM_DS1822 0x22 W1_THERM_DS18B20 0x28 +W1_THERM_DS1825 0x3B Support is provided through the sysfs w1_slave file. Each open and read sequence will initiate a temperature conversion then provide two diff --git a/Documentation/watchdog/src/watchdog-test.c b/Documentation/watchdog/src/watchdog-test.c index 73ff5cc93e05db4c93321464cb8ae948571a18fe..3da822967ee0e13d1a2dbcd88d2d75f5a4aca370 100644 --- a/Documentation/watchdog/src/watchdog-test.c +++ b/Documentation/watchdog/src/watchdog-test.c @@ -31,7 +31,7 @@ static void keep_alive(void) * or "-e" to enable the card. */ -void term(int sig) +static void term(int sig) { close(fd); fprintf(stderr, "Stopping watchdog ticks...\n"); diff --git a/MAINTAINERS b/MAINTAINERS index 5b44872b64ecf79162810e52602c9663364190e5..a21df13ffbcdffa098ff3afb7fa33fe63459711a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -184,6 +184,16 @@ S: Maintained F: Documentation/filesystems/9p.txt F: fs/9p/ +A8293 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/a8293* + AACRAID SCSI RAID DRIVER M: Adaptec OEM Raid Solutions L: linux-scsi@vger.kernel.org @@ -391,6 +401,26 @@ M: Riccardo Facchetti S: Maintained F: sound/oss/aedsp16.c +AF9013 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/af9013* + +AF9033 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/af9033* + AFFS FILE SYSTEM L: linux-fsdevel@vger.kernel.org S: Orphan @@ -827,24 +857,24 @@ F: arch/arm/mach-pxa/colibri-pxa270-income.c ARM/INTEL IOP32X ARM ARCHITECTURE M: Lennert Buytenhek -M: Dan Williams +M: Dan Williams L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained ARM/INTEL IOP33X ARM ARCHITECTURE -M: Dan Williams +M: Dan Williams L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained ARM/INTEL IOP13XX ARM ARCHITECTURE M: Lennert Buytenhek -M: Dan Williams +M: Dan Williams L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained ARM/INTEL IQ81342EX MACHINE SUPPORT M: Lennert Buytenhek -M: Dan Williams +M: Dan Williams L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained @@ -869,7 +899,7 @@ F: drivers/pcmcia/pxa2xx_stargate2.c ARM/INTEL XSC3 (MANZANO) ARM CORE M: Lennert Buytenhek -M: Dan Williams +M: Dan Williams L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained @@ -925,14 +955,14 @@ S: Maintained ARM/NOMADIK ARCHITECTURE M: Alessandro Rubini -M: Linus Walleij +M: Linus Walleij M: STEricsson L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-nomadik/ F: arch/arm/plat-nomadik/ F: drivers/i2c/busses/i2c-nomadik.c -T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT M: Nelson Castillo @@ -1073,7 +1103,7 @@ L: linux-media@vger.kernel.org S: Maintained F: arch/arm/plat-s5p/dev-fimc* F: arch/arm/plat-samsung/include/plat/*fimc* -F: drivers/media/video/s5p-fimc/ +F: drivers/media/platform/s5p-fimc/ ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT M: Kyungmin Park @@ -1083,7 +1113,7 @@ L: linux-arm-kernel@lists.infradead.org L: linux-media@vger.kernel.org S: Maintained F: arch/arm/plat-s5p/dev-mfc.c -F: drivers/media/video/s5p-mfc/ +F: drivers/media/platform/s5p-mfc/ ARM/SAMSUNG S5P SERIES TV SUBSYSTEM SUPPORT M: Kyungmin Park @@ -1091,7 +1121,7 @@ M: Tomasz Stanislawski L: linux-arm-kernel@lists.infradead.org L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/video/s5p-tv/ +F: drivers/media/platform/s5p-tv/ ARM/SHMOBILE ARM ARCHITECTURE M: Paul Mundt @@ -1146,7 +1176,7 @@ F: drivers/usb/host/ehci-w90x900.c F: drivers/video/nuc900fb.c ARM/U300 MACHINE SUPPORT -M: Linus Walleij +M: Linus Walleij L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported F: arch/arm/mach-u300/ @@ -1161,15 +1191,20 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git ARM/Ux500 ARM ARCHITECTURE M: Srinidhi Kasagar -M: Linus Walleij +M: Linus Walleij L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-ux500/ +F: drivers/clocksource/clksrc-dbx500-prcmu.c F: drivers/dma/ste_dma40* +F: drivers/hwspinlock/u8500_hsem.c F: drivers/mfd/abx500* F: drivers/mfd/ab8500* -F: drivers/mfd/stmpe* +F: drivers/mfd/dbx500* +F: drivers/mfd/db8500* +F: drivers/pinctrl/pinctrl-nomadik* F: drivers/rtc/rtc-ab8500.c +F: drivers/rtc/rtc-pl031.c T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git ARM/VFP SUPPORT @@ -1227,9 +1262,9 @@ S: Maintained F: drivers/hwmon/asb100.c ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API -M: Dan Williams +M: Dan Williams W: http://sourceforge.net/projects/xscaleiop -S: Supported +S: Maintained F: Documentation/crypto/async-tx-api.txt F: crypto/async_tx/ F: drivers/dma/ @@ -1352,7 +1387,7 @@ ATMEL ISI DRIVER M: Josh Wu L: linux-media@vger.kernel.org S: Supported -F: drivers/media/video/atmel-isi.c +F: drivers/media/platform/atmel-isi.c F: include/media/atmel-isi.h ATMEL LCDFB DRIVER @@ -1690,7 +1725,7 @@ W: http://linuxtv.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained F: Documentation/video4linux/bttv/ -F: drivers/media/video/bt8xx/bttv* +F: drivers/media/pci/bt8xx/bttv* C-MEDIA CMI8788 DRIVER M: Clemens Ladisch @@ -1720,7 +1755,7 @@ L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained F: Documentation/video4linux/cafe_ccic -F: drivers/media/video/marvell-ccic/ +F: drivers/media/platform/marvell-ccic/ CAIF NETWORK LAYER M: Sjur Braendeland @@ -2109,7 +2144,17 @@ W: http://linuxtv.org W: http://www.ivtvdriver.org/index.php/Cx18 S: Maintained F: Documentation/video4linux/cx18.txt -F: drivers/media/video/cx18/ +F: drivers/media/pci/cx18/ + +CXD2820R MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/cxd2820r* CXGB3 ETHERNET DRIVER (CXGB3) M: Divy Le Ray @@ -2212,7 +2257,7 @@ S: Maintained F: drivers/scsi/tmscsim.* DC395x SCSI driver -M: Oliver Neukum +M: Oliver Neukum M: Ali Akcaagac M: Jamie Lenehan W: http://twibble.org/dist/dc395x/ @@ -2359,7 +2404,7 @@ T: git git://git.linaro.org/people/sumitsemwal/linux-dma-buf.git DMA GENERIC OFFLOAD ENGINE SUBSYSTEM M: Vinod Koul -M: Dan Williams +M: Dan Williams S: Supported F: drivers/dma/ F: include/linux/dma* @@ -2464,6 +2509,117 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/wan/dscc4.c +DVB_USB_AF9015 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/af9015* + +DVB_USB_AF9035 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/af9035* + +DVB_USB_ANYSEE MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/anysee* + +DVB_USB_AU6610 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/au6610* + +DVB_USB_CE6230 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/ce6230* + +DVB_USB_CXUSB MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/cxusb* + +DVB_USB_CYPRESS_FIRMWARE MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/cypress_firmware* + +DVB_USB_EC168 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/ec168* + +DVB_USB_MXL111SF MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/mxl111sf.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/mxl111sf* + +DVB_USB_RTL28XXU MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/rtl28xxu* + +DVB_USB_V2 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/dvb_usb* +F: drivers/media/usb/dvb-usb-v2/usb_urb.c + DYNAMIC DEBUG M: Jason Baron S: Maintained @@ -2475,6 +2631,16 @@ M: "Maciej W. Rozycki" S: Maintained F: drivers/tty/serial/dz.* +E4000 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/e4000* + EATA-DMA SCSI DRIVER M: Michael Neuffer L: linux-eata@i-connect.net @@ -2503,6 +2669,16 @@ S: Maintained F: include/linux/netfilter_bridge/ebt_*.h F: net/bridge/netfilter/ebt*.c +EC100 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/ec100* + ECRYPT FILE SYSTEM M: Tyler Hicks M: Dustin Kirkland @@ -2773,8 +2949,18 @@ FC0011 TUNER DRIVER M: Michael Buesch L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/common/tuners/fc0011.h -F: drivers/media/common/tuners/fc0011.c +F: drivers/media/tuners/fc0011.h +F: drivers/media/tuners/fc0011.c + +FC2580 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/fc2580* FANOTIFY M: Eric Paris @@ -3002,7 +3188,7 @@ M: Kyungmin Park M: Heungjun Kim L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/video/m5mols/ +F: drivers/media/i2c/m5mols/ F: include/media/m5mols.h FUJITSU TABLET EXTRAS @@ -3094,7 +3280,7 @@ F: include/linux/gigaset_dev.h GPIO SUBSYSTEM M: Grant Likely -M: Linus Walleij +M: Linus Walleij S: Maintained T: git git://git.secretlab.ca/git/linux-2.6.git F: Documentation/gpio.txt @@ -3119,49 +3305,56 @@ M: Frank Zago L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/finepix.c +F: drivers/media/usb/gspca/finepix.c GSPCA GL860 SUBDRIVER M: Olivier Lorin L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/gl860/ +F: drivers/media/usb/gspca/gl860/ GSPCA M5602 SUBDRIVER M: Erik Andren L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/m5602/ +F: drivers/media/usb/gspca/m5602/ GSPCA PAC207 SONIXB SUBDRIVER M: Hans de Goede L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/pac207.c +F: drivers/media/usb/gspca/pac207.c GSPCA SN9C20X SUBDRIVER M: Brian Johnson L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/sn9c20x.c +F: drivers/media/usb/gspca/sn9c20x.c GSPCA T613 SUBDRIVER M: Leandro Costantino L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/t613.c +F: drivers/media/usb/gspca/t613.c GSPCA USB WEBCAM DRIVER M: Hans de Goede L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/ +F: drivers/media/usb/gspca/ + +STK1160 USB VIDEO CAPTURE DRIVER +M: Ezequiel Garcia +L: linux-media@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git +S: Maintained +F: drivers/media/usb/stk1160/ HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER M: Frank Seidel @@ -3215,6 +3408,16 @@ L: linux-parisc@vger.kernel.org S: Maintained F: sound/parisc/harmony.* +HD29L2 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/hd29l2* + HEWLETT-PACKARD SMART2 RAID DRIVER M: Chirag Kantharia L: iss_storagedev@hp.com @@ -3383,7 +3586,7 @@ M: "Wolfram Sang (embedded platforms)" L: linux-i2c@vger.kernel.org W: http://i2c.wiki.kernel.org/ T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/ -T: git git://git.fluff.org/bjdooks/linux.git +T: git git://git.pengutronix.de/git/wsa/linux.git S: Maintained F: Documentation/i2c/ F: drivers/i2c/ @@ -3547,12 +3750,12 @@ K: \b(ABS|SYN)_MT_ INTEL C600 SERIES SAS CONTROLLER DRIVER M: Intel SCU Linux support -M: Dan Williams +M: Lukasz Dorau +M: Maciej Patelczyk M: Dave Jiang -M: Ed Nadolski L: linux-scsi@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git -S: Maintained +T: git git://git.code.sf.net/p/intel-sas/isci +S: Supported F: drivers/scsi/isci/ F: firmware/isci/ @@ -3590,8 +3793,8 @@ F: arch/x86/kernel/microcode_core.c F: arch/x86/kernel/microcode_intel.c INTEL I/OAT DMA DRIVER -M: Dan Williams -S: Supported +M: Dan Williams +S: Maintained F: drivers/dma/ioat* INTEL IOMMU (VT-d) @@ -3603,8 +3806,8 @@ F: drivers/iommu/intel-iommu.c F: include/linux/intel-iommu.h INTEL IOP-ADMA DMA DRIVER -M: Dan Williams -S: Maintained +M: Dan Williams +S: Odd fixes F: drivers/dma/iop-adma.c INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT @@ -3662,11 +3865,12 @@ F: Documentation/networking/README.ipw2200 F: drivers/net/wireless/ipw2x00/ INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT) -M: Joseph Cihula +M: Richard L Maliszewski +M: Gang Wei M: Shane Wang L: tboot-devel@lists.sourceforge.net W: http://tboot.sourceforge.net -T: Mercurial http://www.bughost.org/repos.hg/tboot.hg +T: hg http://tboot.hg.sourceforge.net:8000/hgroot/tboot/tboot S: Supported F: Documentation/intel_txt.txt F: include/linux/tboot.h @@ -3861,7 +4065,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://www.ivtvdriver.org S: Maintained F: Documentation/video4linux/*.ivtv -F: drivers/media/video/ivtv/ +F: drivers/media/pci/ivtv/ F: include/linux/ivtv* JC42.4 TEMPERATURE SENSOR DRIVER @@ -4155,6 +4359,26 @@ W: http://legousb.sourceforge.net/ S: Maintained F: drivers/usb/misc/legousbtower.c +LG2160 MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/dvb-frontends/lg2160.* + +LGDT3305 MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/dvb-frontends/lgdt3305.* + LGUEST M: Rusty Russell L: lguest@lists.ozlabs.org @@ -4533,7 +4757,7 @@ S: Supported F: arch/microblaze/ MICROTEK X6 SCANNER -M: Oliver Neukum +M: Oliver Neukum S: Maintained F: drivers/usb/image/microtek.* @@ -4557,7 +4781,7 @@ MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER W: http://popies.net/meye/ S: Orphan F: Documentation/video4linux/meye.txt -F: drivers/media/video/meye.* +F: drivers/media/pci/meye/ F: include/linux/meye.h MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER @@ -4621,6 +4845,16 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git S: Maintained F: drivers/usb/musb/ +MXL5007T MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/tuners/mxl5007t.* + MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) M: Andrew Gallatin L: netdev@vger.kernel.org @@ -4960,7 +5194,7 @@ OMAP IMAGE SIGNAL PROCESSOR (ISP) M: Laurent Pinchart L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/video/omap3isp/* +F: drivers/media/platform/omap3isp/ OMAP USB SUPPORT M: Felipe Balbi @@ -5001,7 +5235,7 @@ M: Jonathan Corbet L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/ov7670.c +F: drivers/media/i2c/ov7670.c ONENAND FLASH DRIVER M: Kyungmin Park @@ -5329,14 +5563,15 @@ PIN CONTROL SUBSYSTEM M: Linus Walleij S: Maintained F: drivers/pinctrl/ +F: include/linux/pinctrl/ PIN CONTROLLER - ST SPEAR -M: Viresh Kumar +M: Viresh Kumar L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained -F: driver/pinctrl/spear/ +F: drivers/pinctrl/spear/ PKTCDVD DRIVER M: Peter Osterlund @@ -5525,7 +5760,7 @@ W: http://www.isely.net/pvrusb2/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained F: Documentation/video4linux/README.pvrusb2 -F: drivers/media/video/pvrusb2/ +F: drivers/media/usb/pvrusb2/ PWM SUBSYSTEM M: Thierry Reding @@ -5538,6 +5773,8 @@ F: Documentation/devicetree/bindings/pwm/ F: include/linux/pwm.h F: include/linux/of_pwm.h F: drivers/pwm/ +F: drivers/video/backlight/pwm_bl.c +F: include/linux/pwm_backlight.h PXA2xx/PXA3xx SUPPORT M: Eric Miao @@ -5633,6 +5870,16 @@ F: fs/qnx4/ F: include/linux/qnx4_fs.h F: include/linux/qnxtypes.h +QT1010 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/qt1010* + QUALCOMM HEXAGON ARCHITECTURE M: Richard Kuo L: linux-hexagon@vger.kernel.org @@ -5682,7 +5929,7 @@ F: Documentation/blockdev/ramdisk.txt F: drivers/block/brd.c RANDOM NUMBER DRIVER -M: Matt Mackall +M: Theodore Ts'o" S: Maintained F: drivers/char/random.c @@ -5799,6 +6046,16 @@ F: include/linux/rose.h F: include/net/rose.h F: net/rose/ +RTL2830 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/rtl2830* + RTL8180 WIRELESS DRIVER M: "John W. Linville" L: linux-wireless@vger.kernel.org @@ -5893,9 +6150,9 @@ L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://www.mihu.de/linux/saa7146 S: Maintained -F: drivers/media/common/saa7146* -F: drivers/media/video/*7146* -F: include/media/*7146* +F: drivers/media/common/saa7146/ +F: drivers/media/pci/saa7146/ +F: include/media/saa7146* SAMSUNG LAPTOP DRIVER M: Corentin Chary @@ -5956,7 +6213,7 @@ M: Huang Shijie M: Kang Yong M: Zhang Xiaobing S: Supported -F: drivers/media/video/tlg2300 +F: drivers/media/usb/tlg2300 SC1200 WDT DRIVER M: Zwane Mwaikambo @@ -6344,8 +6601,9 @@ M: Guennadi Liakhovetski L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: include/media/v4l2* -F: drivers/media/video/v4l2* +F: include/media/soc* +F: drivers/media/i2c/soc_camera/ +F: drivers/media/platform/soc_camera/ SOEKRIS NET48XX LED SUPPORT M: Chris Boot @@ -6763,6 +7021,66 @@ W: http://tcp-lp-mod.sourceforge.net/ S: Maintained F: net/ipv4/tcp_lp.c +TDA10071 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/tda10071* + +TDA18212 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/tda18212* + +TDA18218 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/tda18218* + +TDA18271 MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/tuners/tda18271* + +TDA827x MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/tuners/tda8290.* + +TDA8290 MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/tuners/tda8290.* + TEAM DRIVER M: Jiri Pirko L: netdev@vger.kernel.org @@ -6953,6 +7271,16 @@ F: include/linux/serial_core.h F: include/linux/serial.h F: include/linux/tty.h +TUA9001 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/tua9001* + TULIP NETWORK DRIVERS M: Grant Grundler L: netdev@vger.kernel.org @@ -7071,7 +7399,7 @@ F: include/linux/mtd/ubi.h F: include/mtd/ubi-user.h USB ACM DRIVER -M: Oliver Neukum +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: Documentation/usb/acm.txt @@ -7092,7 +7420,7 @@ S: Supported F: drivers/block/ub.c USB CDC ETHERNET DRIVER -M: Oliver Neukum +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: drivers/net/usb/cdc_*.c @@ -7125,15 +7453,6 @@ S: Maintained F: Documentation/usb/ehci.txt F: drivers/usb/host/ehci* -USB ET61X[12]51 DRIVER -M: Luca Risolia -L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git -W: http://www.linux-projects.org -S: Maintained -F: drivers/media/video/et61x251/ - USB GADGET/PERIPHERAL SUBSYSTEM M: Felipe Balbi L: linux-usb@vger.kernel.org @@ -7165,7 +7484,7 @@ F: drivers/usb/host/isp116x* F: include/linux/usb/isp116x.h USB KAWASAKI LSI DRIVER -M: Oliver Neukum +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/serial/kl5kusb105.* @@ -7283,6 +7602,12 @@ W: http://www.connecttech.com S: Supported F: drivers/usb/serial/whiteheat* +USB SMSC75XX ETHERNET DRIVER +M: Steve Glendinning +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/usb/smsc75xx.* + USB SMSC95XX ETHERNET DRIVER M: Steve Glendinning L: netdev@vger.kernel.org @@ -7297,7 +7622,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://www.linux-projects.org S: Maintained F: Documentation/video4linux/sn9c102.txt -F: drivers/media/video/sn9c102/ +F: drivers/media/usb/sn9c102/ USB SUBSYSTEM M: Greg Kroah-Hartman @@ -7332,17 +7657,7 @@ L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://www.ideasonboard.org/uvc/ S: Maintained -F: drivers/media/video/uvc/ - -USB W996[87]CF DRIVER -M: Luca Risolia -L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git -W: http://www.linux-projects.org -S: Maintained -F: Documentation/video4linux/w9968cf.txt -F: drivers/media/video/w996* +F: drivers/media/usb/uvc/ USB WIRELESS RNDIS DRIVER (rndis_wlan) M: Jussi Kivilinna @@ -7371,7 +7686,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://royale.zerezo.com/zr364xx/ S: Maintained F: Documentation/video4linux/zr364xx.txt -F: drivers/media/video/zr364xx.c +F: drivers/media/usb/zr364xx/ USER-MODE LINUX (UML) M: Jeff Dike @@ -7382,6 +7697,7 @@ W: http://user-mode-linux.sourceforge.net S: Maintained F: Documentation/virtual/uml/ F: arch/um/ +F: arch/x86/um/ F: fs/hostfs/ F: fs/hppfs/ @@ -7414,13 +7730,21 @@ S: Maintained F: Documentation/filesystems/vfat.txt F: fs/fat/ +VFIO DRIVER +M: Alex Williamson +L: kvm@vger.kernel.org +S: Maintained +F: Documentation/vfio.txt +F: drivers/vfio/ +F: include/linux/vfio.h + VIDEOBUF2 FRAMEWORK M: Pawel Osciak M: Marek Szyprowski M: Kyungmin Park L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/video/videobuf2-* +F: drivers/media/v4l2-core/videobuf2-* F: include/media/videobuf2-* VIRTIO CONSOLE DRIVER @@ -7656,23 +7980,28 @@ S: Supported F: Documentation/hwmon/wm83?? F: arch/arm/mach-s3c64xx/mach-crag6410* F: drivers/clk/clk-wm83*.c +F: drivers/extcon/extcon-arizona.c F: drivers/leds/leds-wm83*.c F: drivers/gpio/gpio-*wm*.c +F: drivers/gpio/gpio-arizona.c F: drivers/hwmon/wm83??-hwmon.c F: drivers/input/misc/wm831x-on.c F: drivers/input/touchscreen/wm831x-ts.c F: drivers/input/touchscreen/wm97*.c -F: drivers/mfd/wm8*.c +F: drivers/mfd/arizona* +F: drivers/mfd/wm*.c F: drivers/power/wm83*.c F: drivers/rtc/rtc-wm83*.c F: drivers/regulator/wm8*.c F: drivers/video/backlight/wm83*_bl.c F: drivers/watchdog/wm83*_wdt.c +F: include/linux/mfd/arizona/ F: include/linux/mfd/wm831x/ F: include/linux/mfd/wm8350/ F: include/linux/mfd/wm8400* F: include/linux/wm97xx.h F: include/sound/wm????.h +F: sound/soc/codecs/arizona.? F: sound/soc/codecs/wm* WORKQUEUE @@ -7817,7 +8146,7 @@ L: linux-media@vger.kernel.org W: http://mjpeg.sourceforge.net/driver-zoran/ T: Mercurial http://linuxtv.org/hg/v4l-dvb S: Odd Fixes -F: drivers/media/video/zoran/ +F: drivers/media/pci/zoran/ ZS DECSTATION Z85C30 SERIAL DRIVER M: "Maciej W. Rozycki" diff --git a/Makefile b/Makefile index 8e4c0a7d402b02376263611a10fc26053e0ba9fa..bb9fff26f078063c395fe8f86488349614c84261 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 3 -PATCHLEVEL = 5 +PATCHLEVEL = 6 SUBLEVEL = 0 EXTRAVERSION = -NAME = Saber-toothed Squirrel +NAME = Terrified Chipmunk # *DOCUMENTATION* # To see a list of typical targets execute "make help" diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index d5b9b5e645cc7ad6ee66984d78434b306bc1aa13..9944dedee5b1b1b31abf08599a44421333bd9290 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -18,6 +18,8 @@ config ALPHA select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_SMP_IDLE_THREAD select GENERIC_CMOS_UPDATE + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index 3bb7ffeae3bc610010bb54a3eaba698c513c0c7d..c2cbe4fc391cd7d77d319cb0cbeabd19f7e5ecbb 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h @@ -14,8 +14,8 @@ */ -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) -#define ATOMIC64_INIT(i) ( (atomic64_t) { (i) } ) +#define ATOMIC_INIT(i) { (i) } +#define ATOMIC64_INIT(i) { (i) } #define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic64_read(v) (*(volatile long *)&(v)->counter) diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h index db00f7885faad8949db38886e5ebd798440f63f5..e477bcd5b94aaa3055486564c2ab2d54a5e44934 100644 --- a/arch/alpha/include/asm/fpu.h +++ b/arch/alpha/include/asm/fpu.h @@ -1,7 +1,9 @@ #ifndef __ASM_ALPHA_FPU_H #define __ASM_ALPHA_FPU_H +#ifdef __KERNEL__ #include +#endif /* * Alpha floating-point control register defines: diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h index fd698a174f26a9358a2c8e63b663c68bc47a56c1..b87755a1955482f9a46282749ed68755afca4973 100644 --- a/arch/alpha/include/asm/ptrace.h +++ b/arch/alpha/include/asm/ptrace.h @@ -76,7 +76,10 @@ struct switch_stack { #define task_pt_regs(task) \ ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1) -#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0) +#define current_pt_regs() \ + ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1) + +#define force_successful_syscall_return() (current_pt_regs()->r0 = 0) #endif diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h index dcb221a4b5be3505686b05fb3060307cde68f29b..7d2f75be932e6d16e4ceba058fe0e0c769a8be32 100644 --- a/arch/alpha/include/asm/socket.h +++ b/arch/alpha/include/asm/socket.h @@ -76,9 +76,11 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#ifdef __KERNEL__ /* O_NONBLOCK clashes with the bits used for socket types. Therefore we * have to define SOCK_NONBLOCK to a different value here. */ #define SOCK_NONBLOCK 0x40000000 +#endif /* __KERNEL__ */ #endif /* _ASM_SOCKET_H */ diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index b49ec2f8d6e3e0220e4009793387c917f1b8e090..766fdfde2b7aa0329cc42681f2fb907b08ce9064 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -433,36 +433,12 @@ clear_user(void __user *to, long len) #undef __module_address #undef __module_call -/* Returns: -EFAULT if exception before terminator, N if the entire - buffer filled, else strlen. */ +#define user_addr_max() \ + (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) -extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len); - -extern inline long -strncpy_from_user(char *to, const char __user *from, long n) -{ - long ret = -EFAULT; - if (__access_ok((unsigned long)from, 0, get_fs())) - ret = __strncpy_from_user(to, from, n); - return ret; -} - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -extern long __strlen_user(const char __user *); - -extern inline long strlen_user(const char __user *str) -{ - return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0; -} - -/* Returns: 0 if exception before NUL or reaching the supplied limit (N), - * a value greater than N if the limit would be exceeded, else strlen. */ -extern long __strnlen_user(const char __user *, long); - -extern inline long strnlen_user(const char __user *str, long n) -{ - return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0; -} +extern long strncpy_from_user(char *dest, const char __user *src, long count); +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); /* * About the exception table: diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index 633b23b0664ab2a4a075d648d26547dbc911a65d..a31a78eac9b99962cf6b55df76b1066cdcaf7b2b 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -465,10 +465,12 @@ #define __NR_setns 501 #define __NR_accept4 502 #define __NR_sendmmsg 503 +#define __NR_process_vm_readv 504 +#define __NR_process_vm_writev 505 #ifdef __KERNEL__ -#define NR_SYSCALLS 504 +#define NR_SYSCALLS 506 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_STAT64 diff --git a/arch/alpha/include/asm/word-at-a-time.h b/arch/alpha/include/asm/word-at-a-time.h new file mode 100644 index 0000000000000000000000000000000000000000..6b340d0f1521c3ad9c4edf984abe60982ae24c04 --- /dev/null +++ b/arch/alpha/include/asm/word-at-a-time.h @@ -0,0 +1,55 @@ +#ifndef _ASM_WORD_AT_A_TIME_H +#define _ASM_WORD_AT_A_TIME_H + +#include + +/* + * word-at-a-time interface for Alpha. + */ + +/* + * We do not use the word_at_a_time struct on Alpha, but it needs to be + * implemented to humour the generic code. + */ +struct word_at_a_time { + const unsigned long unused; +}; + +#define WORD_AT_A_TIME_CONSTANTS { 0 } + +/* Return nonzero if val has a zero */ +static inline unsigned long has_zero(unsigned long val, unsigned long *bits, const struct word_at_a_time *c) +{ + unsigned long zero_locations = __kernel_cmpbge(0, val); + *bits = zero_locations; + return zero_locations; +} + +static inline unsigned long prep_zero_mask(unsigned long val, unsigned long bits, const struct word_at_a_time *c) +{ + return bits; +} + +#define create_zero_mask(bits) (bits) + +static inline unsigned long find_zero(unsigned long bits) +{ +#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) + /* Simple if have CIX instructions */ + return __kernel_cttz(bits); +#else + unsigned long t1, t2, t3; + /* Retain lowest set bit only */ + bits &= -bits; + /* Binary search for lowest set bit */ + t1 = bits & 0xf0; + t2 = bits & 0xcc; + t3 = bits & 0xaa; + if (t1) t1 = 4; + if (t2) t2 = 2; + if (t3) t3 = 1; + return t1 + t2 + t3; +#endif +} + +#endif /* _ASM_WORD_AT_A_TIME_H */ diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index d96e742d4dc2c9d139e021ee34aae81eeabdda55..15fa821d09cd38ff58ea5390439617ee2ff4a2eb 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(alpha_write_fp_reg_s); /* entry.S */ EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(kernel_execve); /* Networking helper routines. */ EXPORT_SYMBOL(csum_tcpudp_magic); @@ -74,8 +73,6 @@ EXPORT_SYMBOL(alpha_fp_emul); */ EXPORT_SYMBOL(__copy_user); EXPORT_SYMBOL(__do_clear_user); -EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(__strnlen_user); /* * SMP-specific symbols. diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index 6d159cee5f2f43a48bc9aac8355069a3e588ef7f..ec0da0567ab515e6203d2310a9d960be7d4fc0e7 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -663,58 +663,6 @@ kernel_thread: br ret_to_kernel .end kernel_thread -/* - * kernel_execve(path, argv, envp) - */ - .align 4 - .globl kernel_execve - .ent kernel_execve -kernel_execve: - /* We can be called from a module. */ - ldgp $gp, 0($27) - lda $sp, -(32+SIZEOF_PT_REGS+8)($sp) - .frame $sp, 32+SIZEOF_PT_REGS+8, $26, 0 - stq $26, 0($sp) - stq $16, 8($sp) - stq $17, 16($sp) - stq $18, 24($sp) - .prologue 1 - - lda $16, 32($sp) - lda $17, 0 - lda $18, SIZEOF_PT_REGS - bsr $26, memset !samegp - - /* Avoid the HAE being gratuitously wrong, which would cause us - to do the whole turn off interrupts thing and restore it. */ - ldq $2, alpha_mv+HAE_CACHE - stq $2, 152+32($sp) - - ldq $16, 8($sp) - ldq $17, 16($sp) - ldq $18, 24($sp) - lda $19, 32($sp) - bsr $26, do_execve !samegp - - ldq $26, 0($sp) - bne $0, 1f /* error! */ - - /* Move the temporary pt_regs struct from its current location - to the top of the kernel stack frame. See copy_thread for - details for a normal process. */ - lda $16, 0x4000 - SIZEOF_PT_REGS($8) - lda $17, 32($sp) - lda $18, SIZEOF_PT_REGS - bsr $26, memmove !samegp - - /* Take that over as our new stack frame and visit userland! */ - lda $sp, 0x4000 - SIZEOF_PT_REGS($8) - br $31, ret_from_sys_call - -1: lda $sp, 32+SIZEOF_PT_REGS+8($sp) - ret -.end kernel_execve - /* * Special system calls. Most of these are special in that they either @@ -796,115 +744,6 @@ sys_rt_sigreturn: br ret_from_sys_call .end sys_rt_sigreturn - .align 4 - .globl sys_sethae - .ent sys_sethae -sys_sethae: - .prologue 0 - stq $16, 152($sp) - ret -.end sys_sethae - - .align 4 - .globl osf_getpriority - .ent osf_getpriority -osf_getpriority: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - jsr $26, sys_getpriority - - ldq $26, 0($sp) - blt $0, 1f - - /* Return value is the unbiased priority, i.e. 20 - prio. - This does result in negative return values, so signal - no error by writing into the R0 slot. */ - lda $1, 20 - stq $31, 16($sp) - subl $1, $0, $0 - unop - -1: lda $sp, 16($sp) - ret -.end osf_getpriority - - .align 4 - .globl sys_getxuid - .ent sys_getxuid -sys_getxuid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_UID($3) - ldl $1, CRED_EUID($3) - stq $1, 80($sp) - ret -.end sys_getxuid - - .align 4 - .globl sys_getxgid - .ent sys_getxgid -sys_getxgid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_GID($3) - ldl $1, CRED_EGID($3) - stq $1, 80($sp) - ret -.end sys_getxgid - - .align 4 - .globl sys_getxpid - .ent sys_getxpid -sys_getxpid: - .prologue 0 - ldq $2, TI_TASK($8) - - /* See linux/kernel/timer.c sys_getppid for discussion - about this loop. */ - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - ldl $0, TASK_TGID($2) -1: ldl $1, TASK_TGID($4) -#ifdef CONFIG_SMP - mov $4, $5 - mb - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - cmpeq $4, $5, $5 - beq $5, 1b -#endif - stq $1, 80($sp) - ret -.end sys_getxpid - - .align 4 - .globl sys_alpha_pipe - .ent sys_alpha_pipe -sys_alpha_pipe: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - mov $31, $17 - lda $16, 8($sp) - jsr $26, do_pipe_flags - - ldq $26, 0($sp) - bne $0, 1f - - /* The return values are in $0 and $20. */ - ldl $1, 12($sp) - ldl $0, 8($sp) - - stq $1, 80+16($sp) -1: lda $sp, 16($sp) - ret -.end sys_alpha_pipe - .align 4 .globl sys_execve .ent sys_execve diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 98a103621af6c24e04c219b318281d412ce5018d..bc1acdda7a5ed8ab3945b72559c09a9e763ec030 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -1404,3 +1404,52 @@ SYSCALL_DEFINE3(osf_writev, unsigned long, fd, } #endif + +SYSCALL_DEFINE2(osf_getpriority, int, which, int, who) +{ + int prio = sys_getpriority(which, who); + if (prio >= 0) { + /* Return value is the unbiased priority, i.e. 20 - prio. + This does result in negative return values, so signal + no error */ + force_successful_syscall_return(); + prio = 20 - prio; + } + return prio; +} + +SYSCALL_DEFINE0(getxuid) +{ + current_pt_regs()->r20 = sys_geteuid(); + return sys_getuid(); +} + +SYSCALL_DEFINE0(getxgid) +{ + current_pt_regs()->r20 = sys_getegid(); + return sys_getgid(); +} + +SYSCALL_DEFINE0(getxpid) +{ + current_pt_regs()->r20 = sys_getppid(); + return sys_getpid(); +} + +SYSCALL_DEFINE0(alpha_pipe) +{ + int fd[2]; + int res = do_pipe_flags(fd, 0); + if (!res) { + /* The return values are in $0 and $20. */ + current_pt_regs()->r20 = fd[1]; + res = fd[0]; + } + return res; +} + +SYSCALL_DEFINE1(sethae, unsigned long, val) +{ + current_pt_regs()->hae = val; + return 0; +} diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 153d3fce3e8e9b4adc84c64fe63483d815a1ec59..d6fde98b74b38bf87aac592c2b9697c1bc925558 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -455,3 +455,22 @@ get_wchan(struct task_struct *p) } return pc; } + +int kernel_execve(const char *path, const char *const argv[], const char *const envp[]) +{ + /* Avoid the HAE being gratuitously wrong, which would cause us + to do the whole turn off interrupts thing and restore it. */ + struct pt_regs regs = {.hae = alpha_mv.hae_cache}; + int err = do_execve(path, argv, envp, ®s); + if (!err) { + struct pt_regs *p = current_pt_regs(); + /* copy regs to normal position and off to userland we go... */ + *p = regs; + __asm__ __volatile__ ( + "mov %0, $sp;" + "br $31, ret_from_sys_call" + : : "r"(p)); + } + return err; +} +EXPORT_SYMBOL(kernel_execve); diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 87835235f114bd3d6619c8985833046b368eea96..2ac6b45c3e0005d542a084bfabcc652b4747f75e 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -111,7 +111,7 @@ sys_call_table: .quad sys_socket .quad sys_connect .quad sys_accept - .quad osf_getpriority /* 100 */ + .quad sys_osf_getpriority /* 100 */ .quad sys_send .quad sys_recv .quad sys_sigreturn @@ -522,6 +522,8 @@ sys_call_table: .quad sys_setns .quad sys_accept4 .quad sys_sendmmsg + .quad sys_process_vm_readv + .quad sys_process_vm_writev /* 505 */ .size sys_call_table, . - sys_call_table .type sys_call_table, @object diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile index c0a83ab62b785f332d817b9f5b0036545295b640..59660743237cc489b4e4eef405e92ab66f7b25e8 100644 --- a/arch/alpha/lib/Makefile +++ b/arch/alpha/lib/Makefile @@ -31,8 +31,6 @@ lib-y = __divqu.o __remqu.o __divlu.o __remlu.o \ $(ev6-y)memchr.o \ $(ev6-y)copy_user.o \ $(ev6-y)clear_user.o \ - $(ev6-y)strncpy_from_user.o \ - $(ev67-y)strlen_user.o \ $(ev6-y)csum_ipv6_magic.o \ $(ev6-y)clear_page.o \ $(ev6-y)copy_page.o \ diff --git a/arch/alpha/lib/ev6-strncpy_from_user.S b/arch/alpha/lib/ev6-strncpy_from_user.S deleted file mode 100644 index d2e28178caccc8b59fb2aea43b88e2934e54a7db..0000000000000000000000000000000000000000 --- a/arch/alpha/lib/ev6-strncpy_from_user.S +++ /dev/null @@ -1,424 +0,0 @@ -/* - * arch/alpha/lib/ev6-strncpy_from_user.S - * 21264 version contributed by Rick Gorton - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * A bunch of instructions got moved and temp registers were changed - * to aid in scheduling. Control flow was also re-arranged to eliminate - * branches, and to provide longer code sequences to enable better scheduling. - * A total rewrite (using byte load/stores for start & tail sequences) - * is desirable, but very difficult to do without a from-scratch rewrite. - * Save that for the future. - */ - - -#include -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 4 -__strncpy_from_user: - and a0, 7, t3 # E : find dest misalignment - beq a2, $zerolength # U : - - /* Are source and destination co-aligned? */ - mov a0, v0 # E : save the string start - xor a0, a1, t4 # E : - EX( ldq_u t1, 0(a1) ) # L : Latency=3 load first quadword - ldq_u t0, 0(a0) # L : load first (partial) aligned dest quadword - - addq a2, t3, a2 # E : bias count by dest misalignment - subq a2, 1, a3 # E : - addq zero, 1, t10 # E : - and t4, 7, t4 # E : misalignment between the two - - and a3, 7, t6 # E : number of tail bytes - sll t10, t6, t10 # E : t10 = bitmask of last count byte - bne t4, $unaligned # U : - lda t2, -1 # E : build a mask against false zero - - /* - * We are co-aligned; take care of a partial first word. - * On entry to this basic block: - * t0 == the first destination word for masking back in - * t1 == the first source word. - */ - - srl a3, 3, a2 # E : a2 = loop counter = (count - 1)/8 - addq a1, 8, a1 # E : - mskqh t2, a1, t2 # U : detection in the src word - nop - - /* Create the 1st output word and detect 0's in the 1st input word. */ - mskqh t1, a1, t3 # U : - mskql t0, a1, t0 # U : assemble the first output word - ornot t1, t2, t2 # E : - nop - - cmpbge zero, t2, t8 # E : bits set iff null found - or t0, t3, t0 # E : - beq a2, $a_eoc # U : - bne t8, $a_eos # U : 2nd branch in a quad. Bad. - - /* On entry to this basic block: - * t0 == a source quad not containing a null. - * a0 - current aligned destination address - * a1 - current aligned source address - * a2 - count of quadwords to move. - * NOTE: Loop improvement - unrolling this is going to be - * a huge win, since we're going to stall otherwise. - * Fix this later. For _really_ large copies, look - * at using wh64 on a look-ahead basis. See the code - * in clear_user.S and copy_user.S. - * Presumably, since (a0) and (a1) do not overlap (by C definition) - * Lots of nops here: - * - Separate loads from stores - * - Keep it to 1 branch/quadpack so the branch predictor - * can train. - */ -$a_loop: - stq_u t0, 0(a0) # L : - addq a0, 8, a0 # E : - nop - subq a2, 1, a2 # E : - - EX( ldq_u t0, 0(a1) ) # L : - addq a1, 8, a1 # E : - cmpbge zero, t0, t8 # E : Stall 2 cycles on t0 - beq a2, $a_eoc # U : - - beq t8, $a_loop # U : - nop - nop - nop - - /* Take care of the final (partial) word store. At this point - * the end-of-count bit is set in t8 iff it applies. - * - * On entry to this basic block we have: - * t0 == the source word containing the null - * t8 == the cmpbge mask that found it. - */ -$a_eos: - negq t8, t12 # E : find low bit set - and t8, t12, t12 # E : - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t12, t6, t8 # E : - zapnot t0, t8, t0 # U : clear src bytes > null - zap t1, t8, t1 # U : clear dst bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # L : - br $finish_up # L0 : - nop - nop - - /* Add the end-of-count bit to the eos detection bitmask. */ - .align 4 -$a_eoc: - or t10, t8, t8 - br $a_eos - nop - nop - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 4 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # L : load second src word - addq a1, 8, a1 # E : - mskql t0, a0, t0 # U : mask trailing garbage in dst - extqh t2, a1, t4 # U : - - or t1, t4, t1 # E : first aligned src word complete - mskqh t1, a0, t1 # U : mask leading garbage in src - or t0, t1, t0 # E : first output word complete - or t0, t6, t6 # E : mask original data for zero test - - cmpbge zero, t6, t8 # E : - beq a2, $u_eocfin # U : - bne t8, $u_final # U : bad news - 2nd branch in a quad - lda t6, -1 # E : mask out the bits we have - - mskql t6, a1, t6 # U : already seen - stq_u t0, 0(a0) # L : store first output word - or t6, t2, t2 # E : - cmpbge zero, t2, t8 # E : find nulls in second partial - - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - bne t8, $u_late_head_exit # U : - nop - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # U : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # L : read next high-order source word - addq a1, 8, a1 # E : - cmpbge zero, t2, t8 # E : - - beq a2, $u_eoc # U : - bne t8, $u_eos # U : - nop - nop - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - /* - * Extra nops here: - * separate load quads from store quads - * only one branch/quad to permit predictor training - */ - - .align 4 -$u_loop: - extqh t2, a1, t0 # U : extract high bits for current word - addq a1, 8, a1 # E : - extql t2, a1, t3 # U : extract low bits for next time - addq a0, 8, a0 # E : - - or t0, t1, t0 # E : current dst word now complete - EX( ldq_u t2, 0(a1) ) # L : load high word for next time - subq a2, 1, a2 # E : - nop - - stq_u t0, -8(a0) # L : save the current word - mov t3, t1 # E : - cmpbge zero, t2, t8 # E : test new word for eos - beq a2, $u_eoc # U : - - beq t8, $u_loop # U : - nop - nop - nop - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ - .align 4 -$u_eos: - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : first (partial) source word complete - cmpbge zero, t0, t8 # E : is the null in this first bit? - nop - - bne t8, $u_final # U : - stq_u t0, 0(a0) # L : the null was in the high-order bits - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - - .align 4 -$u_late_head_exit: - extql t2, a1, t0 # U : - cmpbge zero, t0, t8 # E : - or t8, t10, t6 # E : - cmoveq a2, t6, t8 # E : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ - .align 4 -$u_final: - negq t8, t6 # E : isolate low bit set - and t6, t8, t12 # E : - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t6, t12, t8 # E : - zapnot t0, t8, t0 # U : kill source bytes > null - zap t1, t8, t1 # U : kill dest bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # E : - br $finish_up # U : - nop - nop - - .align 4 -$u_eoc: # end-of-count - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : - cmpbge zero, t0, t8 # E : - nop - - .align 4 -$u_eocfin: # end-of-count, final word - or t10, t8, t8 # E : - br $u_final # U : - nop - nop - - /* Unaligned copy entry point. */ - .align 4 -$unaligned: - - srl a3, 3, a2 # U : a2 = loop counter = (count - 1)/8 - and a0, 7, t4 # E : find dest misalignment - and a1, 7, t5 # E : find src misalignment - mov zero, t0 # E : - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t6 # E : - beq t4, 1f # U : - ldq_u t0, 0(a0) # L : - lda t6, -1 # E : - - mskql t6, a0, t6 # E : - nop - nop - nop - - .align 4 -1: - subq a1, t4, a1 # E : sub dest misalignment from src addr - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - cmplt t4, t5, t12 # E : - extql t1, a1, t1 # U : shift src into place - lda t2, -1 # E : for creating masks later - - beq t12, $u_head # U : - mskqh t2, t5, t2 # U : begin src byte validity mask - cmpbge zero, t1, t8 # E : is there a zero? - nop - - extql t2, a1, t2 # U : - or t8, t10, t5 # E : test for end-of-count too - cmpbge zero, t2, t3 # E : - cmoveq a2, t5, t8 # E : Latency=2, extra map slot - - nop # E : goes with cmov - andnot t8, t3, t8 # E : - beq t8, $u_head # U : - nop - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # L : - negq t8, t6 # E : build bitmask of bytes <= zero - mskqh t1, t4, t1 # U : - and t6, t8, t12 # E : - - subq t12, 1, t6 # E : - or t6, t12, t8 # E : - zapnot t2, t8, t2 # U : prepare source word; mirror changes - zapnot t1, t8, t1 # U : to source validity mask - - andnot t0, t2, t0 # E : zero place for source to reside - or t0, t1, t0 # E : and put it there - stq_u t0, 0(a0) # L : - nop - - .align 4 -$finish_up: - zapnot t0, t12, t4 # U : was last byte written null? - and t12, 0xf0, t3 # E : binary search for the address of the - cmovne t4, 1, t4 # E : Latency=2, extra map slot - nop # E : with cmovne - - and t12, 0xcc, t2 # E : last byte written - and t12, 0xaa, t1 # E : - cmovne t3, 4, t3 # E : Latency=2, extra map slot - nop # E : with cmovne - - bic a0, 7, t0 - cmovne t2, 2, t2 # E : Latency=2, extra map slot - nop # E : with cmovne - nop - - cmovne t1, 1, t1 # E : Latency=2, extra map slot - nop # E : with cmovne - addq t0, t3, t0 # E : - addq t1, t2, t1 # E : - - addq t0, t1, t0 # E : - addq t0, t4, t0 # add one if we filled the buffer - subq t0, v0, v0 # find string length - ret # L0 : - - .align 4 -$zerolength: - nop - nop - nop - clr v0 - -$exception: - nop - nop - nop - ret - - .end __strncpy_from_user diff --git a/arch/alpha/lib/ev67-strlen_user.S b/arch/alpha/lib/ev67-strlen_user.S deleted file mode 100644 index 57e0d77b81a6955a41f6cf3a16f6bd4537debd65..0000000000000000000000000000000000000000 --- a/arch/alpha/lib/ev67-strlen_user.S +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/alpha/lib/ev67-strlen_user.S - * 21264 version contributed by Rick Gorton - * - * Return the length of the string including the NULL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * Try not to change the actual algorithm if possible for consistency. - */ - -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 4 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - nop - nop - nop - - .globl __strnlen_user - - .align 4 -__strnlen_user: - .prologue 0 - EX( ldq_u t0, 0(a0) ) # L : load first quadword (a0 may be misaligned) - lda t1, -1(zero) # E : - - insqh t1, a0, t1 # U : - andnot a0, 7, v0 # E : - or t1, t0, t0 # E : - subq a0, 1, a0 # E : get our +1 for the return - - cmpbge zero, t0, t1 # E : t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 # E : - subq a0, v0, t0 # E : - bne t1, $found # U : - - addq t2, t0, t2 # E : - addq a1, 1, a1 # E : - nop # E : - nop # E : - - .align 4 -$loop: ble t2, $limit # U : - EX( ldq t0, 8(v0) ) # L : - nop # E : - nop # E : - - cmpbge zero, t0, t1 # E : - subq t2, 8, t2 # E : - addq v0, 8, v0 # E : addr += 8 - beq t1, $loop # U : - -$found: cttz t1, t2 # U0 : - addq v0, t2, v0 # E : - subq v0, a0, v0 # E : - ret # L0 : - -$exception: - nop - nop - nop - ret - - .align 4 # currently redundant -$limit: - nop - nop - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strlen_user.S b/arch/alpha/lib/strlen_user.S deleted file mode 100644 index 508a18e96479a94768a8a6c1fe0f1ea80737a830..0000000000000000000000000000000000000000 --- a/arch/alpha/lib/strlen_user.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/alpha/lib/strlen_user.S - * - * Return the length of the string including the NUL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - */ - -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 3 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - - .globl __strnlen_user - - .align 3 -__strnlen_user: - .prologue 0 - - EX( ldq_u t0, 0(a0) ) # load first quadword (a0 may be misaligned) - lda t1, -1(zero) - insqh t1, a0, t1 - andnot a0, 7, v0 - or t1, t0, t0 - subq a0, 1, a0 # get our +1 for the return - cmpbge zero, t0, t1 # t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 - subq a0, v0, t0 - bne t1, $found - - addq t2, t0, t2 - addq a1, 1, a1 - - .align 3 -$loop: ble t2, $limit - EX( ldq t0, 8(v0) ) - subq t2, 8, t2 - addq v0, 8, v0 # addr += 8 - cmpbge zero, t0, t1 - beq t1, $loop - -$found: negq t1, t2 # clear all but least set bit - and t1, t2, t1 - - and t1, 0xf0, t2 # binary search for that set bit - and t1, 0xcc, t3 - and t1, 0xaa, t4 - cmovne t2, 4, t2 - cmovne t3, 2, t3 - cmovne t4, 1, t4 - addq t2, t3, t2 - addq v0, t4, v0 - addq v0, t2, v0 - nop # dual issue next two on ev4 and ev5 - subq v0, a0, v0 -$exception: - ret - - .align 3 # currently redundant -$limit: - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strncpy_from_user.S b/arch/alpha/lib/strncpy_from_user.S deleted file mode 100644 index 73ee21160ff7428f5da6192a971971f3cf60b82d..0000000000000000000000000000000000000000 --- a/arch/alpha/lib/strncpy_from_user.S +++ /dev/null @@ -1,339 +0,0 @@ -/* - * arch/alpha/lib/strncpy_from_user.S - * Contributed by Richard Henderson (rth@tamu.edu) - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - */ - - -#include -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 3 -$aligned: - /* On entry to this basic block: - t0 == the first destination word for masking back in - t1 == the first source word. */ - - /* Create the 1st output word and detect 0's in the 1st input word. */ - lda t2, -1 # e1 : build a mask against false zero - mskqh t2, a1, t2 # e0 : detection in the src word - mskqh t1, a1, t3 # e0 : - ornot t1, t2, t2 # .. e1 : - mskql t0, a1, t0 # e0 : assemble the first output word - cmpbge zero, t2, t8 # .. e1 : bits set iff null found - or t0, t3, t0 # e0 : - beq a2, $a_eoc # .. e1 : - bne t8, $a_eos # .. e1 : - - /* On entry to this basic block: - t0 == a source word not containing a null. */ - -$a_loop: - stq_u t0, 0(a0) # e0 : - addq a0, 8, a0 # .. e1 : - EX( ldq_u t0, 0(a1) ) # e0 : - addq a1, 8, a1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t0, t8 # .. e1 (stall) - beq a2, $a_eoc # e1 : - beq t8, $a_loop # e1 : - - /* Take care of the final (partial) word store. At this point - the end-of-count bit is set in t8 iff it applies. - - On entry to this basic block we have: - t0 == the source word containing the null - t8 == the cmpbge mask that found it. */ - -$a_eos: - negq t8, t12 # e0 : find low bit set - and t8, t12, t12 # e1 (stall) - - /* For the sake of the cache, don't read a destination word - if we're not going to need it. */ - and t12, 0x80, t6 # e0 : - bne t6, 1f # .. e1 (zdb) - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t12, t6, t8 # e0 : - unop # - zapnot t0, t8, t0 # e0 : clear src bytes > null - zap t1, t8, t1 # .. e1 : clear dst bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) - br $finish_up - - /* Add the end-of-count bit to the eos detection bitmask. */ -$a_eoc: - or t10, t8, t8 - br $a_eos - - /*** The Function Entry Point ***/ - .align 3 -__strncpy_from_user: - mov a0, v0 # save the string start - beq a2, $zerolength - - /* Are source and destination co-aligned? */ - xor a0, a1, t1 # e0 : - and a0, 7, t0 # .. e1 : find dest misalignment - and t1, 7, t1 # e0 : - addq a2, t0, a2 # .. e1 : bias count by dest misalignment - subq a2, 1, a2 # e0 : - and a2, 7, t2 # e1 : - srl a2, 3, a2 # e0 : a2 = loop counter = (count - 1)/8 - addq zero, 1, t10 # .. e1 : - sll t10, t2, t10 # e0 : t10 = bitmask of last count byte - bne t1, $unaligned # .. e1 : - - /* We are co-aligned; take care of a partial first word. */ - - EX( ldq_u t1, 0(a1) ) # e0 : load first src word - addq a1, 8, a1 # .. e1 : - - beq t0, $aligned # avoid loading dest word if not needed - ldq_u t0, 0(a0) # e0 : - br $aligned # .. e1 : - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 3 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # e0 : load second src word - addq a1, 8, a1 # .. e1 : - mskql t0, a0, t0 # e0 : mask trailing garbage in dst - extqh t2, a1, t4 # e0 : - or t1, t4, t1 # e1 : first aligned src word complete - mskqh t1, a0, t1 # e0 : mask leading garbage in src - or t0, t1, t0 # e0 : first output word complete - or t0, t6, t6 # e1 : mask original data for zero test - cmpbge zero, t6, t8 # e0 : - beq a2, $u_eocfin # .. e1 : - bne t8, $u_final # e1 : - - lda t6, -1 # e1 : mask out the bits we have - mskql t6, a1, t6 # e0 : already seen - stq_u t0, 0(a0) # e0 : store first output word - or t6, t2, t2 # .. e1 : - cmpbge zero, t2, t8 # e0 : find nulls in second partial - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e0 : - bne t8, $u_late_head_exit # .. e1 : - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # e0 : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # .. e1 : read next high-order source word - addq a1, 8, a1 # e0 : - cmpbge zero, t2, t8 # e1 (stall) - beq a2, $u_eoc # e1 : - bne t8, $u_eos # e1 : - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - .align 3 -$u_loop: - extqh t2, a1, t0 # e0 : extract high bits for current word - addq a1, 8, a1 # .. e1 : - extql t2, a1, t3 # e0 : extract low bits for next time - addq a0, 8, a0 # .. e1 : - or t0, t1, t0 # e0 : current dst word now complete - EX( ldq_u t2, 0(a1) ) # .. e1 : load high word for next time - stq_u t0, -8(a0) # e0 : save the current word - mov t3, t1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t2, t8 # .. e1 : test new word for eos - beq a2, $u_eoc # e1 : - beq t8, $u_loop # e1 : - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ -$u_eos: - extqh t2, a1, t0 # e0 : - or t0, t1, t0 # e1 : first (partial) source word complete - - cmpbge zero, t0, t8 # e0 : is the null in this first bit? - bne t8, $u_final # .. e1 (zdb) - - stq_u t0, 0(a0) # e0 : the null was in the high-order bits - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e1 : - -$u_late_head_exit: - extql t2, a1, t0 # .. e0 : - cmpbge zero, t0, t8 # e0 : - or t8, t10, t6 # e1 : - cmoveq a2, t6, t8 # e0 : - nop # .. e1 : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ -$u_final: - negq t8, t6 # e0 : isolate low bit set - and t6, t8, t12 # e1 : - - and t12, 0x80, t6 # e0 : avoid dest word load if we can - bne t6, 1f # .. e1 (zdb) - - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t6, t12, t8 # e0 : - zapnot t0, t8, t0 # .. e1 : kill source bytes > null - zap t1, t8, t1 # e0 : kill dest bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) # e0 : - br $finish_up - -$u_eoc: # end-of-count - extqh t2, a1, t0 - or t0, t1, t0 - cmpbge zero, t0, t8 - -$u_eocfin: # end-of-count, final word - or t10, t8, t8 - br $u_final - - /* Unaligned copy entry point. */ - .align 3 -$unaligned: - - EX( ldq_u t1, 0(a1) ) # e0 : load first source word - - and a0, 7, t4 # .. e1 : find dest misalignment - and a1, 7, t5 # e0 : find src misalignment - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t0 # .. e1 : - mov zero, t6 # e0 : - beq t4, 1f # .. e1 : - ldq_u t0, 0(a0) # e0 : - lda t6, -1 # .. e1 : - mskql t6, a0, t6 # e0 : -1: - subq a1, t4, a1 # .. e1 : sub dest misalignment from src addr - - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - - cmplt t4, t5, t12 # e1 : - extql t1, a1, t1 # .. e0 : shift src into place - lda t2, -1 # e0 : for creating masks later - beq t12, $u_head # e1 : - - mskqh t2, t5, t2 # e0 : begin src byte validity mask - cmpbge zero, t1, t8 # .. e1 : is there a zero? - extql t2, a1, t2 # e0 : - or t8, t10, t5 # .. e1 : test for end-of-count too - cmpbge zero, t2, t3 # e0 : - cmoveq a2, t5, t8 # .. e1 : - andnot t8, t3, t8 # e0 : - beq t8, $u_head # .. e1 (zdb) - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # e0 : - negq t8, t6 # .. e1 : build bitmask of bytes <= zero - mskqh t1, t4, t1 # e0 : - and t6, t8, t12 # .. e1 : - subq t12, 1, t6 # e0 : - or t6, t12, t8 # e1 : - - zapnot t2, t8, t2 # e0 : prepare source word; mirror changes - zapnot t1, t8, t1 # .. e1 : to source validity mask - - andnot t0, t2, t0 # e0 : zero place for source to reside - or t0, t1, t0 # e1 : and put it there - stq_u t0, 0(a0) # e0 : - -$finish_up: - zapnot t0, t12, t4 # was last byte written null? - cmovne t4, 1, t4 - - and t12, 0xf0, t3 # binary search for the address of the - and t12, 0xcc, t2 # last byte written - and t12, 0xaa, t1 - bic a0, 7, t0 - cmovne t3, 4, t3 - cmovne t2, 2, t2 - cmovne t1, 1, t1 - addq t0, t3, t0 - addq t1, t2, t1 - addq t0, t1, t0 - addq t0, t4, t0 # add one if we filled the buffer - - subq t0, v0, v0 # find string length - ret - -$zerolength: - clr v0 -$exception: - ret - - .end __strncpy_from_user diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c index 5eecab1a84efd3430deab218698ab3dab91c0e6a..0c4132dd3507a0b62b3c40c2fc6fd4065a325262 100644 --- a/arch/alpha/mm/fault.c +++ b/arch/alpha/mm/fault.c @@ -89,6 +89,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr, const struct exception_table_entry *fixup; int fault, si_code = SEGV_MAPERR; siginfo_t info; + unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (cause > 0 ? FAULT_FLAG_WRITE : 0)); /* As of EV6, a load into $31/$f31 is a prefetch, and never faults (or is suppressed by the PALcode). Support that for older CPUs @@ -114,6 +116,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto vmalloc_fault; #endif +retry: down_read(&mm->mmap_sem); vma = find_vma(mm, address); if (!vma) @@ -144,8 +147,11 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* If for any reason at all we couldn't handle the fault, make sure we exit gracefully rather than endlessly redo the fault. */ - fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0); - up_read(&mm->mmap_sem); + fault = handle_mm_fault(mm, vma, address, flags); + + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return; + if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; @@ -153,10 +159,26 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) - current->maj_flt++; - else - current->min_flt++; + + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) + current->maj_flt++; + else + current->min_flt++; + if (fault & VM_FAULT_RETRY) { + flags &= ~FAULT_FLAG_ALLOW_RETRY; + + /* No need to up_read(&mm->mmap_sem) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + + goto retry; + } + } + + up_read(&mm->mmap_sem); + return; /* Something tried to access memory that isn't in our memory map. @@ -186,12 +208,14 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* We ran out of memory, or some other thing happened to us that made us unable to handle the page fault gracefully. */ out_of_memory: + up_read(&mm->mmap_sem); if (!user_mode(regs)) goto no_context; pagefault_out_of_memory(); return; do_sigbus: + up_read(&mm->mmap_sem); /* Send a sigbus, regardless of whether we were in kernel or user mode. */ info.si_signo = SIGBUS; diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c index a0a5d27aa2150e48c840cfcdae78f43f5bc8c4dd..b8ce18f485d3ecce23d9903138eeb930ab62cb4d 100644 --- a/arch/alpha/oprofile/common.c +++ b/arch/alpha/oprofile/common.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "op_impl.h" diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7980873525b264c5b8fe327387483d241662f3a1..2f88d8d9770116014f7ff55e80d98c65fbb191ed 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,7 +6,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7) + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION @@ -38,7 +38,6 @@ config ARM select HARDIRQS_SW_RESEND select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_IRQ_PROBE select ARCH_WANT_IPC_PARSE_VERSION select HARDIRQS_SW_RESEND select CPU_PM if (SUSPEND || CPU_IDLE) @@ -126,11 +125,6 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y @@ -1151,6 +1145,7 @@ config PLAT_ORION bool select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select IRQ_DOMAIN select COMMON_CLK config PLAT_PXA @@ -2149,6 +2144,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f15f82bf3a50f808005af479ff9c334f100c1044..e968a52e4881967a01f8aa68fc586aafe61edf38 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -356,15 +356,15 @@ choice is nothing connected to read from the DCC. config DEBUG_SEMIHOSTING - bool "Kernel low-level debug output via semihosting I" + bool "Kernel low-level debug output via semihosting I/O" help Semihosting enables code running on an ARM target to use the I/O facilities on a host debugger/emulator through a - simple SVC calls. The host debugger or emulator must have + simple SVC call. The host debugger or emulator must have semihosting enabled for the special svc call to be trapped otherwise the kernel will crash. - This is known to work with OpenOCD, as wellas + This is known to work with OpenOCD, as well as ARM's Fast Models, or any other controlling environment that implements semihosting. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 30eae87ead6d4b245bc6707040645f5182464e90..a051dfbdd7db07fb12db913d85050a5bb0ea7167 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -%.dtb: +%.dtb: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -dtbs: +dtbs: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ # We use MRPROPER_FILES and CLEAN_FILES now diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index b8c64b80bafc848032dfff366a9ac4428a7f82b5..bc67cbff39448ff84a3f0c14cd22876975ee1965 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -653,16 +653,21 @@ __armv7_mmu_cache_on: mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs #endif mrc p15, 0, r0, c1, c0, 0 @ read control reg + bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer #ifdef CONFIG_MMU #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables #endif + mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg orrne r0, r0, #1 @ MMU enabled movne r1, #0xfffffffd @ domain 0 = client + bic r6, r6, #1 << 31 @ 32-bit translation system + bic r6, r6, #3 << 0 @ use only ttbr0 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer mcrne p15, 0, r1, c3, c0, 0 @ load domain access control + mcrne p15, 0, r6, c2, c0, 2 @ load ttb control #endif mcr p15, 0, r0, c7, c5, 4 @ ISB mcr p15, 0, r0, c1, c0, 0 @ load control register diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c48d7e5a5c2474f73ac028f73537e0a6659..bd0cff3f808c7c5be55ce79dd31b343d37e6297a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -154,5 +154,10 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index e1fa7e6edfe87e899cb7a0131458f66d1a93f740..71d6b5d0daf1ca8a03360ba74b62922bf9de36b1 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -12,7 +12,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. * - * Contains definitions specific to the Armada 370 SoC that are not + * Contains definitions specific to the Armada XP SoC that are not * common to all Armada SoCs. */ diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 66389c1c6f6297e50c8ae3b944d7311dcbb26b6c..7c95f76398de401ac166af8f32d4a34a6b918e79 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -104,6 +104,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -113,6 +114,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -122,6 +124,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index b460d6ce9eb592da5191871b40b2d3433156bcef..195019b7ca0e046073361a587862c885c8fbfb7e 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -95,6 +95,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff400 { @@ -104,6 +105,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff600 { @@ -113,6 +115,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffff800 { @@ -122,6 +125,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioE: gpio@fffffa00 { @@ -131,6 +135,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@ffffee00 { diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 7829a4d0cb22e2b4c010def2ca689e46c7682044..96514c134e54bafd1540c5f55524411b09f1e7a8 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -15,7 +15,7 @@ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index bafa8806fc17293e3bddc28aff5b4829f677c178..63751b1e744b42611f8e74d17738ccd69dd1efe1 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -113,6 +113,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff400 { @@ -122,6 +123,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff600 { @@ -131,6 +133,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffff800 { @@ -140,6 +143,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioE: gpio@fffffa00 { @@ -149,6 +153,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@ffffee00 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index bfac0dfc332c7d10bc3fe2f87458ec728c48b885..ef9336ae9614f85ffb0ce2348b69fc06b0f756e5 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -107,6 +107,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -116,6 +117,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -125,6 +127,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffffa00 { @@ -134,6 +137,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 4a18c393b1360f490c9796f3c598d349338ed2f5..8a387a8d61b745fc763c9e13f015896bc3e2bff7 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -115,6 +115,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -124,6 +125,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -133,6 +135,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffffa00 { @@ -142,6 +145,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index a874dbfb5ae69da5d6771c75d9605ca3bbbcbcaa..e6138310e5ced961a269b903fadcfff6869c7be2 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -51,11 +51,11 @@ dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; ecc@80008000 { - reg = <0x80008000 2000>; + reg = <0x80008000 0x2000>; status = "disabled"; }; @@ -63,7 +63,7 @@ compatible = "fsl,imx23-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; @@ -72,14 +72,14 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <15 14>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; etm@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; status = "disabled"; }; @@ -87,7 +87,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx23-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; @@ -273,32 +273,32 @@ }; emi@80020000 { - reg = <0x80020000 2000>; + reg = <0x80020000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; @@ -310,14 +310,14 @@ }; ssp1: ssp@80034000 { - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <2 20>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; tvenc@80038000 { - reg = <0x80038000 2000>; + reg = <0x80038000 0x2000>; status = "disabled"; }; }; @@ -330,37 +330,37 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; status = "disabled"; }; audio-out@80048000 { - reg = <0x80048000 2000>; + reg = <0x80048000 0x2000>; status = "disabled"; }; audio-in@8004c000 { - reg = <0x8004c000 2000>; + reg = <0x8004c000 0x2000>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; @@ -370,26 +370,26 @@ }; i2c@80058000 { - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; status = "disabled"; }; rtc@8005c000 { compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x8005c000 2000>; + reg = <0x8005c000 0x2000>; interrupts = <22>; }; pwm: pwm@80064000 { compatible = "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <5>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; @@ -429,7 +429,7 @@ ranges; usbctrl@80080000 { - reg = <0x80080000 0x10000>; + reg = <0x80080000 0x40000>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index d3f8296e19e0828ea1bd94e88ef04a9467327e21..0a8978a40ecef73d826c12be5d7970b2120195da 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -27,7 +27,7 @@ status = "okay"; }; - uart@1000a000 { + uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 00bae3aad5ab601f7a21adf4da8539aa48880781..5303ab680a3461614e324b27ed455f7da01b253d 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -19,6 +19,12 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; }; avic: avic-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 787efac68da81b81f79318a0ac55817eb92c8879..3fa6d190fab4f9a2c1c4c47abc8904bce199b0da 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -57,18 +57,18 @@ }; hsadc@80002000 { - reg = <0x80002000 2000>; + reg = <0x80002000 0x2000>; interrupts = <13 87>; status = "disabled"; }; dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; perfmon@80006000 { - reg = <0x80006000 800>; + reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; @@ -77,7 +77,7 @@ compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; @@ -86,28 +86,28 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <96 82>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp@80012000 { - reg = <0x80012000 2000>; + reg = <0x80012000 0x2000>; interrupts = <97 83>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; interrupts = <98 84>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp@80016000 { - reg = <0x80016000 2000>; + reg = <0x80016000 0x2000>; interrupts = <99 85>; fsl,ssp-dma-channel = <3>; status = "disabled"; @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; @@ -510,96 +510,96 @@ }; digctl@8001c000 { - reg = <0x8001c000 2000>; + reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; etm@80022000 { - reg = <0x80022000 2000>; + reg = <0x80022000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; interrupts = <52 53 54>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; lcdif@80030000 { compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; + reg = <0x80030000 0x2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80032000 2000>; + reg = <0x80032000 0x2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <9>; status = "disabled"; }; simdbg@8003c000 { - reg = <0x8003c000 200>; + reg = <0x8003c000 0x200>; status = "disabled"; }; simgpmisel@8003c200 { - reg = <0x8003c200 100>; + reg = <0x8003c200 0x100>; status = "disabled"; }; simsspsel@8003c300 { - reg = <0x8003c300 100>; + reg = <0x8003c300 0x100>; status = "disabled"; }; simmemsel@8003c400 { - reg = <0x8003c400 100>; + reg = <0x8003c400 0x100>; status = "disabled"; }; gpiomon@8003c500 { - reg = <0x8003c500 100>; + reg = <0x8003c500 0x100>; status = "disabled"; }; simenet@8003c700 { - reg = <0x8003c700 100>; + reg = <0x8003c700 0x100>; status = "disabled"; }; armjtag@8003c800 { - reg = <0x8003c800 100>; + reg = <0x8003c800 0x100>; status = "disabled"; }; }; @@ -612,45 +612,45 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; interrupts = <59 80>; fsl,saif-dma-channel = <4>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { compatible = "fsl,imx28-saif"; - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; interrupts = <58 81>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; spdif@80054000 { - reg = <0x80054000 2000>; + reg = <0x80054000 0x2000>; interrupts = <45 66>; status = "disabled"; }; rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x80056000 2000>; + reg = <0x80056000 0x2000>; interrupts = <29>; }; @@ -658,7 +658,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; status = "disabled"; @@ -668,7 +668,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x8005a000 2000>; + reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; status = "disabled"; @@ -676,14 +676,14 @@ pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index de065b5976e6cf0ed025c7e550198f4b079b817c..59d9789e550898cc041e6670ca0430776b204c2b 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,8 +25,8 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; status = "okay"; }; @@ -53,7 +53,7 @@ spi-max-frequency = <6000000>; reg = <0>; interrupt-parent = <&gpio1>; - interrupts = <8>; + interrupts = <8 0x4>; regulators { sw1_reg: sw1 { diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 53cbaa3d4f904cbe464116640824fd24a4015d81..aba28dc87fc80b3d064b5acb0861ab80eec4eca1 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -17,6 +17,10 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; }; tzic: tz-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 5b8eafcdbeec638009a894365b577df17256b3c0..da895e93a999113e0585905126dd980f3029e80b 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -64,12 +64,32 @@ reg = <0xf4000000 0x2000000>; phy-mode = "mii"; interrupt-parent = <&gpio2>; - interrupts = <31>; + interrupts = <31 0x8>; reg-io-width = <4>; + /* + * VDD33A and VDDVARIO of LAN9220 are supplied by + * SW4_3V3 of LTC3589. Before the regulator driver + * for this PMIC is available, we use a fixed dummy + * 3V3 regulator to get LAN9220 driver probing work. + */ + vdd33a-supply = <®_3p3v>; + vddvario-supply = <®_3p3v>; smsc,irq-push-pull; }; }; + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index fc79cdc4b4e6a18d96138025bad146caabb04004..cd37165edce5e5d2f06628813c01e17181aa8b8d 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; tzic: tz-interrupt-controller@0fffc000 { diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index d42e851ceb97e423fd785e3cd357ba6d70b23d8c..72f30f3e6171b4b737d122333c03a25a37189ddb 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -53,6 +53,7 @@ fsl,pins = < 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ >; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 3d3c64b014e61f9978072571343f6b84afb5f523..fd57079f71a95281d107da8df2328c37df8cc1d6 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; cpus { diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 9a33077130e8498cb73f022fd99aaef114120eab..5bb0bf39d3b88483ffd16828b57fdd8aceca7612 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood.dtsi" +/include/ "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-320 NAS (Rev A1)"; @@ -15,6 +15,31 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + gpio-leds { + compatible = "gpio-leds"; + blue-power { + label = "dns320:blue:power"; + gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ + linux,default-trigger = "default-on"; + }; + blue-usb { + label = "dns320:blue:usb"; + gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + }; + orange-l_hdd { + label = "dns320:orange:l_hdd"; + gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ + }; + orange-r_hdd { + label = "dns320:orange:r_hdd"; + gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + }; + orange-usb { + label = "dns320:orange:usb"; + gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */ + }; + }; + ocp@f1000000 { serial@12000 { clock-frequency = <166666667>; @@ -25,40 +50,5 @@ clock-frequency = <166666667>; status = "okay"; }; - - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index 16734c1b5dfe91a6ee4ee71aacd0a1149de18648..d430713ea9b93c3fd746df1e3f4a92cf31796026 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood.dtsi" +/include/ "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-325 NAS (Rev A1)"; @@ -15,45 +15,43 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; - ocp@f1000000 { - serial@12000 { - clock-frequency = <200000000>; - status = "okay"; + gpio-leds { + compatible = "gpio-leds"; + white-power { + label = "dns325:white:power"; + gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ + linux,default-trigger = "default-on"; + }; + white-usb { + label = "dns325:white:usb"; + gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + }; + red-l_hdd { + label = "dns325:red:l_hdd"; + gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ }; + red-r_hdd { + label = "dns325:red:r_hdd"; + gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + }; + red-usb { + label = "dns325:red:usb"; + gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */ + }; + }; - nand@3000000 { + ocp@f1000000 { + i2c@11000 { status = "okay"; - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; + lm75: lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; }; }; + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..7408655f91b500cc5f4a4fc283c6bb30c7c43eac --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -0,0 +1,69 @@ +/include/ "kirkwood.dtsi" + +/ { + model = "D-Link DNS NASes (kirkwood-based)"; + compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power button"; + linux,code = <116>; + gpios = <&gpio1 2 1>; + }; + button@2 { + label = "USB unmount button"; + linux,code = <161>; + gpios = <&gpio1 15 1>; + }; + button@3 { + label = "Reset button"; + linux,code = <0x198>; + gpios = <&gpio1 16 1>; + }; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x500000>; + }; + + partition@600000 { + label = "ramdisk"; + reg = <0x0600000 0x500000>; + }; + + partition@b00000 { + label = "image"; + reg = <0x0b00000 0x6600000>; + }; + + partition@7100000 { + label = "mini firmware"; + reg = <0x7100000 0xa00000>; + }; + + partition@7b00000 { + label = "config"; + reg = <0x7b00000 0x500000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 78b0f06a09a2591bc6714d487324e0502f697a4c..26e281fbf6bc36383d2c505e6991686a2e7eea4d 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -20,5 +20,55 @@ clock-frequency = <200000000>; status = "ok"; }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l1606e"; + reg = <0>; + spi-max-frequency = <50000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + + partition@100000 { + reg = <0x100000 0x10000>; + label = "u-boot env"; + }; + + partition@180000 { + reg = <0x180000 0x10000>; + label = "dtb"; + }; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + bluetooth { + label = "dreamplug:blue:bluetooth"; + gpios = <&gpio1 15 1>; + }; + wifi { + label = "dreamplug:green:wifi"; + gpios = <&gpio1 16 1>; + }; + wifi-ap { + label = "dreamplug:green:wifi_ap"; + gpios = <&gpio1 17 1>; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts new file mode 100644 index 0000000000000000000000000000000000000000..7c8238fbb6f96ab5027561a942339d2078915211 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Seagate GoFlex Net"; + compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "pogoplug"; + reg = <0x0500000 0x2000000>; + }; + + partition@2500000 { + label = "root"; + reg = <0x02500000 0xd800000>; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio1 14 1>; + linux,default-trigger = "default-on"; + }; + fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 1>; + }; + left0 { + label = "status:white:left0"; + gpios = <&gpio1 10 0>; + }; + left1 { + label = "status:white:left1"; + gpios = <&gpio1 11 0>; + }; + left2 { + label = "status:white:left2"; + gpios = <&gpio1 12 0>; + }; + left3 { + label = "status:white:left3"; + gpios = <&gpio1 13 0>; + }; + right0 { + label = "status:white:right0"; + gpios = <&gpio1 6 0>; + }; + right1 { + label = "status:white:right1"; + gpios = <&gpio1 7 0>; + }; + right2 { + label = "status:white:right2"; + gpios = <&gpio1 8 0>; + }; + right3 { + label = "status:white:right3"; + gpios = <&gpio1 9 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index f59dcf6dc45f6b8cc7e7238bf0ac9230a9ff98f0..66794ed75ff1d3162dc8a567b7f36b37c020b1f2 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -21,6 +21,11 @@ status = "okay"; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + nand@3000000 { status = "okay"; @@ -41,4 +46,37 @@ }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio0 29 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 28 1>; + }; + }; + gpio-leds { + compatible = "gpio-leds"; + + green-os { + label = "ib62x0:green:os"; + gpios = <&gpio0 25 0>; + linux,default-trigger = "default-on"; + }; + red-os { + label = "ib62x0:red:os"; + gpios = <&gpio0 22 0>; + }; + usb-copy { + label = "ib62x0:red:usb_copy"; + gpios = <&gpio0 27 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 026a1f82d813345989c00dd104419e4c4b6efaef..f8ca6fa88192a5d36edb0c484a7a13c7c11e6e7c 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -18,9 +18,55 @@ }; ocp@f1000000 { + i2c@11000 { + status = "okay"; + + lm63: lm63@4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; }; }; + gpio-leds { + compatible = "gpio-leds"; + + led-level { + label = "led_level"; + gpios = <&gpio1 9 0>; + linux,default-trigger = "default-on"; + }; + power-blue { + label = "power:blue"; + gpios = <&gpio1 10 0>; + linux,default-trigger = "timer"; + }; + power-red { + label = "power:red"; + gpios = <&gpio1 11 0>; + }; + usb1 { + label = "usb1:blue"; + gpios = <&gpio1 12 0>; + }; + usb2 { + label = "usb2:blue"; + gpios = <&gpio1 13 0>; + }; + usb3 { + label = "usb3:blue"; + gpios = <&gpio1 14 0>; + }; + usb4 { + label = "usb4:blue"; + gpios = <&gpio1 15 0>; + }; + otb { + label = "otb:blue"; + gpios = <&gpio1 16 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts new file mode 100644 index 0000000000000000000000000000000000000000..9510c9ea666cc15dad8b512ac6c84d2b2cd8a0d5 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -0,0 +1,20 @@ +/dts-v1/; + +/include/ "kirkwood-lsxl.dtsi" + +/ { + model = "Buffalo Linkstation LS-CHLv2"; + compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts new file mode 100644 index 0000000000000000000000000000000000000000..739019c4cba9c0806ca09da9b2c8cb2fffca2762 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -0,0 +1,20 @@ +/dts-v1/; + +/include/ "kirkwood-lsxl.dtsi" + +/ { + model = "Buffalo Linkstation LS-XHL"; + compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..8ac51c08269d303b77cd0560133e475dc7bfa927 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -0,0 +1,95 @@ +/include/ "kirkwood.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p40"; + reg = <0>; + spi-max-frequency = <25000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x60000>; + label = "uboot"; + read-only; + }; + + partition@60000 { + reg = <0x60000 0x10000>; + label = "dtb"; + read-only; + }; + + partition@70000 { + reg = <0x70000 0x10000>; + label = "uboot_env"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Function Button"; + linux,code = <132>; + gpios = <&gpio1 9 1>; + }; + button@2 { + label = "Power-on Switch"; + linux,code = <116>; + gpios = <&gpio1 10 1>; + }; + button@3 { + label = "Power-auto Switch"; + linux,code = <142>; + gpios = <&gpio1 11 1>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + + led@1 { + label = "lschlv2:blue:func"; + gpios = <&gpio1 4 1>; + }; + + led@2 { + label = "lschlv2:red:alarm"; + gpios = <&gpio1 5 1>; + }; + + led@3 { + label = "lschlv2:amber:info"; + gpios = <&gpio1 6 1>; + }; + + led@4 { + label = "lschlv2:blue:power"; + gpios = <&gpio1 7 1>; + linux,default-trigger = "default-on"; + }; + + led@5 { + label = "lschlv2:red:func"; + gpios = <&gpio1 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts new file mode 100644 index 0000000000000000000000000000000000000000..ccbf32757800ebc7480f776698e8a14213827ef8 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -0,0 +1,21 @@ +/dts-v1/; + +/include/ "kirkwood-ts219.dtsi" + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio0 15 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 16 1>; + }; + }; +}; \ No newline at end of file diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts new file mode 100644 index 0000000000000000000000000000000000000000..fbe9932161a125a3f50d8361786ac9993acb8a64 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -0,0 +1,21 @@ +/dts-v1/; + +/include/ "kirkwood-ts219.dtsi" + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio1 11 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio1 5 1>; + }; + }; +}; \ No newline at end of file diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..64ea27cb329851eb1fd242a8b016f619bb860ce4 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -0,0 +1,78 @@ +/include/ "kirkwood.dtsi" + +/ { + model = "QNAP TS219 family"; + compatible = "qnap,ts219", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + s35390a: s35390a@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + serial@12100 { + clock-frequency = <200000000>; + status = "okay"; + }; + spi@10600 { + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0000000 { + reg = <0x00000000 0x00080000>; + label = "U-Boot"; + }; + + partition@00200000 { + reg = <0x00200000 0x00200000>; + label = "Kernel"; + }; + + partition@00400000 { + reg = <0x00400000 0x00900000>; + label = "RootFS1"; + }; + partition@00d00000 { + reg = <0x00d00000 0x00300000>; + label = "RootFS2"; + }; + partition@00040000 { + reg = <0x00080000 0x00040000>; + label = "U-Boot Config"; + }; + partition@000c0000 { + reg = <0x000c0000 0x00140000>; + label = "NAS Config"; + }; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index f95dbc190ab623c0c0decd5899336841afa9f6b8..cef9616f330aa06fc75769a79fbcf62211b3fea7 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -2,6 +2,15 @@ / { compatible = "marvell,kirkwood"; + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>, + <0xf1020214 0x04>; + }; ocp@f1000000 { compatible = "simple-bus"; @@ -9,6 +18,24 @@ #address-cells = <1>; #size-cells = <1>; + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <35>, <36>, <37>, <38>; + }; + + gpio1: gpio@10140 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10140 0x40>; + ngpio = <18>; + interrupts = <39>, <40>, <41>; + }; + serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; @@ -33,6 +60,29 @@ interrupts = <53>; }; + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <23>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + status = "okay"; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + status = "disabled"; + }; + nand@3000000 { #address-cells = <1>; #size-cells = <1>; @@ -45,5 +95,15 @@ /* set partition map and/or chip-delay in board dts */ status = "disabled"; }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <29>; + clock-frequency = <100000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 3b2f3510d7eb91ca5ce520692682ad26aca89d31..d351b27d7213f65c50680e50965d41cdfd4218f2 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -66,6 +66,7 @@ vcxio: regulator@8 { compatible = "ti,twl6030-vcxio"; + regulator-always-on; }; vusb: regulator@9 { @@ -74,10 +75,12 @@ v1v8: regulator@10 { compatible = "ti,twl6030-v1v8"; + regulator-always-on; }; v2v1: regulator@11 { compatible = "ti,twl6030-v2v1"; + regulator-always-on; }; clk32kg: regulator@12 { diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 7d8718468e0dff1ec28b63014f6c56ec62650d10..90610c7030f7aafd4ccc9663983bc367e89324dd 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -33,7 +33,7 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" +CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y CONFIG_VFP=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f725b9637b3374a4079c17ca50823f064ea0bb6d..3c9f32f9b6b4dc6e5b77884deaa216c87684919c 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index ccdb6357fb74065e017d44527a27e8c2c7a3f46d..4edcfb4e4deeea476d9b5007779153d2281643b8 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -34,7 +34,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index b152de79fd95373e2f6fd8e34e66a4c360463c3b..e58edc36b4066bdba9dcdd4112d5ae29c15c8f5e 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -193,6 +193,8 @@ CONFIG_MMC_OMAP_HS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y +CONFIG_DMADEVICES=y +CONFIG_DMA_OMAP=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 1d24f8458befd49cd41b98e6fb1d6f22fcca8f94..71277a1591bad96d77036ad8eb2557af2a6d4c54 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_KALLSYMS is not set -# CONFIG_BUG is not set +# CONFIG_BUGVERBOSE is not set # CONFIG_ELF_CORE is not set # CONFIG_SHMEM is not set CONFIG_SLOB=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661d1cf6e757739429a4ba7730ea7be14eeb..da6845493caabae29842d959f0b80bdcc1bd7790 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 03fb93621d0d6046b7b416c9c4328437380fd843..5c8b3bf4d8252f1013af6fea25848ce9c41dcfeb 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -320,4 +320,12 @@ .size \name , . - \name .endm + .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req +#ifndef CONFIG_CPU_USE_DOMAINS + adds \tmp, \addr, #\size - 1 + sbcccs \tmp, \tmp, \limit + bcs \bad +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 004c1bc95d2b9082de58e0626134a779705620b6..e4448e16046dd32ab69ca17ef65a6b21745a3e0b 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -215,7 +215,9 @@ static inline void vivt_flush_cache_mm(struct mm_struct *mm) static inline void vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) + struct mm_struct *mm = vma->vm_mm; + + if (!mm || cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), vma->vm_flags); } @@ -223,7 +225,9 @@ vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned static inline void vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { + struct mm_struct *mm = vma->vm_mm; + + if (!mm || cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) { unsigned long addr = user_addr & PAGE_MASK; __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); } diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 2ae842df455180d3bcd445d339ecd332d3b36c4e..5c44dcb0987bd31418298f7932baaa5a82320477 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -202,6 +202,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs); } +/* + * This can be called during early boot to increase the size of the atomic + * coherent DMA pool above the default value of 256KiB. It must be called + * before postcore_initcall. + */ +extern void __init init_dma_coherent_pool_size(unsigned long size); + /* * This can be called during boot to increase the size of the consistent * DMA region above it's default value of 2MB. It must be called before the diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index e965f1b560f11e3a504814183c98f8f1b11bbf25..5f6ddcc56452998f40b1c16d7e20a0ff1ec010bd 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x) #define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) #endif #endif +#endif /* __ASSEMBLY__ */ #ifndef PHYS_OFFSET #ifdef PLAT_PHYS_OFFSET @@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif #endif +#ifndef __ASSEMBLY__ + /* * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h index 93226cf23ae0a838e192be1d675ee886be9dd52e..b1479fd04a951f1d82d55f77fd01cb9f0b072f38 100644 --- a/arch/arm/include/asm/mutex.h +++ b/arch/arm/include/asm/mutex.h @@ -7,121 +7,10 @@ */ #ifndef _ASM_MUTEX_H #define _ASM_MUTEX_H - -#if __LINUX_ARM_ARCH__ < 6 -/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */ -# include -#else - /* - * Attempting to lock a mutex on ARMv6+ can be done with a bastardized - * atomic decrement (it is not a reliable atomic decrement but it satisfies - * the defined semantics for our purpose, while being smaller and faster - * than a real atomic decrement or atomic swap. The idea is to attempt - * decrementing the lock value only once. If once decremented it isn't zero, - * or if its store-back fails due to a dispute on the exclusive store, we - * simply bail out immediately through the slow path where the lock will be - * reattempted until it succeeds. + * On pre-ARMv6 hardware this results in a swp-based implementation, + * which is the most efficient. For ARMv6+, we emit a pair of exclusive + * accesses instead. */ -static inline void -__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res; - - __asm__ ( - - "ldrex %0, [%2] \n\t" - "sub %0, %0, #1 \n\t" - "strex %1, %0, [%2] " - - : "=&r" (__res), "=&r" (__ex_flag) - : "r" (&(count)->counter) - : "cc","memory" ); - - __res |= __ex_flag; - if (unlikely(__res != 0)) - fail_fn(count); -} - -static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res; - - __asm__ ( - - "ldrex %0, [%2] \n\t" - "sub %0, %0, #1 \n\t" - "strex %1, %0, [%2] " - - : "=&r" (__res), "=&r" (__ex_flag) - : "r" (&(count)->counter) - : "cc","memory" ); - - __res |= __ex_flag; - if (unlikely(__res != 0)) - __res = fail_fn(count); - return __res; -} - -/* - * Same trick is used for the unlock fast path. However the original value, - * rather than the result, is used to test for success in order to have - * better generated assembly. - */ -static inline void -__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res, __orig; - - __asm__ ( - - "ldrex %0, [%3] \n\t" - "add %1, %0, #1 \n\t" - "strex %2, %1, [%3] " - - : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) - : "r" (&(count)->counter) - : "cc","memory" ); - - __orig |= __ex_flag; - if (unlikely(__orig != 0)) - fail_fn(count); -} - -/* - * If the unlock was done on a contended lock, or if the unlock simply fails - * then the mutex remains locked. - */ -#define __mutex_slowpath_needs_to_unlock() 1 - -/* - * For __mutex_fastpath_trylock we use another construct which could be - * described as a "single value cmpxchg". - * - * This provides the needed trylock semantics like cmpxchg would, but it is - * lighter and less generic than a true cmpxchg implementation. - */ -static inline int -__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res, __orig; - - __asm__ ( - - "1: ldrex %0, [%3] \n\t" - "subs %1, %0, #1 \n\t" - "strexeq %2, %1, [%3] \n\t" - "movlt %0, #0 \n\t" - "cmpeq %2, #0 \n\t" - "bgt 1b " - - : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) - : "r" (&count->counter) - : "cc", "memory" ); - - return __orig; -} - -#endif +#include #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f66626d71e7d1a304ad2c750fc4b00be9a436901..41dc31f834c3b68926a070036ac024b83f8e7b66 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -195,6 +195,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_none(pte) (!pte_val(pte)) +#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) +#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) +#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) +#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) +#define pte_special(pte) (0) + +#define pte_present_user(pte) \ + ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ + (L_PTE_PRESENT | L_PTE_USER)) + #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) { @@ -206,25 +218,15 @@ extern void __sync_icache_dcache(pte_t pteval); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) { - if (addr >= TASK_SIZE) - set_pte_ext(ptep, pteval, 0); - else { + unsigned long ext = 0; + + if (addr < TASK_SIZE && pte_present_user(pteval)) { __sync_icache_dcache(pteval); - set_pte_ext(ptep, pteval, PTE_EXT_NG); + ext |= PTE_EXT_NG; } -} -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) -#define pte_special(pte) (0) - -#define pte_present_user(pte) \ - ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ - (L_PTE_PRESENT | L_PTE_USER)) + set_pte_ext(ptep, pteval, ext); +} #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -251,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <--------------- offset --------------------> <- type --> 0 0 0 + * <--------------- offset ----------------------> < type -> 0 0 0 * - * This gives us up to 63 swap files and 32GB per swap file. Note that + * This gives us up to 31 swap files and 64GB per swap file. Note that * the offset field is always non-zero. */ #define __SWP_TYPE_SHIFT 3 -#define __SWP_TYPE_BITS 6 +#define __SWP_TYPE_BITS 5 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index e3f7572634381bd28fbf3225eb375788431ee3fc..05b8e82ec9f5b66744305de1094df1115fc92798 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,5 +10,7 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); +extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate); #endif diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 23ebc0c82a3975ae5c455dd39598e93ab33922e7..24d284a1bfc75faa0ed90fb7882a67f00128f336 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -196,7 +196,7 @@ static const struct tagtable __tagtable_##fn __tag = { tag, fn } struct membank { phys_addr_t start; - unsigned long size; + phys_addr_t size; unsigned int highmem; }; @@ -217,7 +217,7 @@ extern struct meminfo meminfo; #define bank_phys_end(bank) ((bank)->start + (bank)->size) #define bank_phys_size(bank) (bank)->size -extern int arm_add_memory(phys_addr_t start, unsigned long size); +extern int arm_add_memory(phys_addr_t start, phys_addr_t size); extern void early_print(const char *str, ...); extern void dump_machine_table(void); diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 314d4664eae7d9976a5fe656f74918cb8d15ab8b..99a19512ee26e2e5d99135d21f10d8b99e606226 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -199,6 +199,9 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, { pgtable_page_dtor(pte); +#ifdef CONFIG_ARM_LPAE + tlb_add_flush(tlb, addr); +#else /* * With the classic ARM MMU, a pte page has two corresponding pmd * entries, each covering 1MB. @@ -206,6 +209,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, addr &= PMD_MASK; tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); tlb_add_flush(tlb, addr + SZ_1M); +#endif tlb_remove_page(tlb, pte); } diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 479a6352e0b5075911e91a4e0b60b7e9443fd4fd..77bd79f2ffdbd0344d096ca7fb2db809fb52d387 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -101,28 +101,39 @@ extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -#define __get_user_x(__r2,__p,__e,__s,__i...) \ +#define __GUP_CLOBBER_1 "lr", "cc" +#ifdef CONFIG_CPU_USE_DOMAINS +#define __GUP_CLOBBER_2 "ip", "lr", "cc" +#else +#define __GUP_CLOBBER_2 "lr", "cc" +#endif +#define __GUP_CLOBBER_4 "lr", "cc" + +#define __get_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%1", "r2") \ + __asmeq("%3", "r1") \ "bl __get_user_" #__s \ : "=&r" (__e), "=r" (__r2) \ - : "0" (__p) \ - : __i, "cc") + : "0" (__p), "r" (__l) \ + : __GUP_CLOBBER_##__s) -#define get_user(x,p) \ +#define __get_user_check(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ register unsigned long __r2 asm("r2"); \ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __get_user_x(__r2, __p, __e, 1, "lr"); \ - break; \ + __get_user_x(__r2, __p, __e, __l, 1); \ + break; \ case 2: \ - __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ + __get_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __get_user_x(__r2, __p, __e, 4, "lr"); \ + __get_user_x(__r2, __p, __e, __l, 4); \ break; \ default: __e = __get_user_bad(); break; \ } \ @@ -130,42 +141,57 @@ extern int __get_user_4(void *); __e; \ }) +#define get_user(x,p) \ + ({ \ + might_fault(); \ + __get_user_check(x,p); \ + }) + extern int __put_user_1(void *, unsigned int); extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); extern int __put_user_8(void *, unsigned long long); -#define __put_user_x(__r2,__p,__e,__s) \ +#define __put_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%2", "r2") \ + __asmeq("%3", "r1") \ "bl __put_user_" #__s \ : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ + : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") -#define put_user(x,p) \ +#define __put_user_check(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __r2 asm("r2") = (x); \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __put_user_x(__r2, __p, __e, 1); \ + __put_user_x(__r2, __p, __e, __l, 1); \ break; \ case 2: \ - __put_user_x(__r2, __p, __e, 2); \ + __put_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __put_user_x(__r2, __p, __e, 4); \ + __put_user_x(__r2, __p, __e, __l, 4); \ break; \ case 8: \ - __put_user_x(__r2, __p, __e, 8); \ + __put_user_x(__r2, __p, __e, __l, 8); \ break; \ default: __e = __put_user_bad(); break; \ } \ __e; \ }) +#define put_user(x,p) \ + ({ \ + might_fault(); \ + __put_user_check(x,p); \ + }) + #else /* CONFIG_MMU */ /* @@ -219,6 +245,7 @@ do { \ unsigned long __gu_addr = (unsigned long)(ptr); \ unsigned long __gu_val; \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ @@ -300,6 +327,7 @@ do { \ unsigned long __pu_addr = (unsigned long)(ptr); \ __typeof__(*(ptr)) __pu_val = (x); \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 0cab47d4a83ff97a23c7a9d2975cfb855a687e3e..2fde5fd1accedda5a00accac967e1985be9c7f08 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -404,6 +404,7 @@ #define __NR_setns (__NR_SYSCALL_BASE+375) #define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) #define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) + /* 378 for kcmp */ /* * The following SWIs are ARM private. @@ -483,6 +484,7 @@ */ #define __IGNORE_fadvise64_64 #define __IGNORE_migrate_pages +#define __IGNORE_kcmp #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 463ff4a0ec8acaa69372b8abd40a39260ee91736..e337879595e565e5666cbd8ac0c40a4a72908c0e 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -387,6 +387,7 @@ /* 375 */ CALL(sys_setns) CALL(sys_process_vm_readv) CALL(sys_process_vm_writev) + CALL(sys_ni_syscall) /* reserved for sys_kcmp */ #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 0d1851ca6eb993a628f623c257487200fe529604..0f82098c9bfe3618115dcc4e8b2d74d95c7ddcf6 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -244,6 +244,19 @@ svc_preempt: b 1b #endif +__und_fault: + @ Correct the PC such that it is pointing at the instruction + @ which caused the fault. If the faulting instruction was ARM + @ the PC will be pointing at the next instruction, and have to + @ subtract 4. Otherwise, it is Thumb, and the PC will be + @ pointing at the second half of the Thumb instruction. We + @ have to subtract 2. + ldr r2, [r0, #S_PC] + sub r2, r2, r1 + str r2, [r0, #S_PC] + b do_undefinstr +ENDPROC(__und_fault) + .align 5 __und_svc: #ifdef CONFIG_KPROBES @@ -261,25 +274,32 @@ __und_svc: @ @ r0 - instruction @ -#ifndef CONFIG_THUMB2_KERNEL +#ifndef CONFIG_THUMB2_KERNEL ldr r0, [r4, #-4] #else + mov r1, #2 ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2 cmp r0, #0xe800 @ 32-bit instruction if xx >= 0 - ldrhhs r9, [r4] @ bottom 16 bits - orrhs r0, r9, r0, lsl #16 + blo __und_svc_fault + ldrh r9, [r4] @ bottom 16 bits + add r4, r4, #2 + str r4, [sp, #S_PC] + orr r0, r9, r0, lsl #16 #endif - adr r9, BSYM(1f) + adr r9, BSYM(__und_svc_finish) mov r2, r4 bl call_fpe + mov r1, #4 @ PC correction to apply +__und_svc_fault: mov r0, sp @ struct pt_regs *regs - bl do_undefinstr + bl __und_fault @ @ IRQs off again before pulling preserved data off the stack @ -1: disable_irq_notrace +__und_svc_finish: + disable_irq_notrace @ @ restore SPSR and restart the instruction @@ -423,25 +443,33 @@ __und_usr: mov r2, r4 mov r3, r5 + @ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the + @ faulting instruction depending on Thumb mode. + @ r3 = regs->ARM_cpsr @ - @ fall through to the emulation code, which returns using r9 if - @ it has emulated the instruction, or the more conventional lr - @ if we are to treat this as a real undefined instruction - @ - @ r0 - instruction + @ The emulation code returns using r9 if it has emulated the + @ instruction, or the more conventional lr if we are to treat + @ this as a real undefined instruction @ adr r9, BSYM(ret_from_exception) - adr lr, BSYM(__und_usr_unknown) + tst r3, #PSR_T_BIT @ Thumb mode? - itet eq @ explicit IT needed for the 1f label - subeq r4, r2, #4 @ ARM instr at LR - 4 - subne r4, r2, #2 @ Thumb instr at LR - 2 -1: ldreqt r0, [r4] + bne __und_usr_thumb + sub r4, r2, #4 @ ARM instr at LR - 4 +1: ldrt r0, [r4] #ifdef CONFIG_CPU_ENDIAN_BE8 - reveq r0, r0 @ little endian instruction + rev r0, r0 @ little endian instruction #endif - beq call_fpe + @ r0 = 32-bit ARM instruction which caused the exception + @ r2 = PC value for the following instruction (:= regs->ARM_pc) + @ r4 = PC value for the faulting instruction + @ lr = 32-bit undefined instruction function + adr lr, BSYM(__und_usr_fault_32) + b call_fpe + +__und_usr_thumb: @ Thumb instruction + sub r4, r2, #2 @ First half of thumb instr at LR - 2 #if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7 /* * Thumb-2 instruction handling. Note that because pre-v6 and >= v6 platforms @@ -455,7 +483,7 @@ __und_usr: ldr r5, .LCcpu_architecture ldr r5, [r5] cmp r5, #CPU_ARCH_ARMv7 - blo __und_usr_unknown + blo __und_usr_fault_16 @ 16bit undefined instruction /* * The following code won't get run unless the running CPU really is v7, so * coding round the lack of ldrht on older arches is pointless. Temporarily @@ -463,15 +491,18 @@ __und_usr: */ .arch armv6t2 #endif -2: - ARM( ldrht r5, [r4], #2 ) - THUMB( ldrht r5, [r4] ) - THUMB( add r4, r4, #2 ) +2: ldrht r5, [r4] cmp r5, #0xe800 @ 32bit instruction if xx != 0 - blo __und_usr_unknown -3: ldrht r0, [r4] + blo __und_usr_fault_16 @ 16bit undefined instruction +3: ldrht r0, [r2] add r2, r2, #2 @ r2 is PC + 2, make it PC + 4 + str r2, [sp, #S_PC] @ it's a 2x16bit instr, update orr r0, r0, r5, lsl #16 + adr lr, BSYM(__und_usr_fault_32) + @ r0 = the two 16-bit Thumb instructions which caused the exception + @ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc) + @ r4 = PC value for the first 16-bit Thumb instruction + @ lr = 32bit undefined instruction function #if __LINUX_ARM_ARCH__ < 7 /* If the target arch was overridden, change it back: */ @@ -482,17 +513,13 @@ __und_usr: #endif #endif /* __LINUX_ARM_ARCH__ < 7 */ #else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */ - b __und_usr_unknown + b __und_usr_fault_16 #endif - UNWIND(.fnend ) + UNWIND(.fnend) ENDPROC(__und_usr) - @ - @ fallthrough to call_fpe - @ - /* - * The out of line fixup for the ldrt above. + * The out of line fixup for the ldrt instructions above. */ .pushsection .fixup, "ax" .align 2 @@ -524,11 +551,12 @@ ENDPROC(__und_usr) * NEON handler code. * * Emulators may wish to make use of the following registers: - * r0 = instruction opcode. - * r2 = PC+4 + * r0 = instruction opcode (32-bit ARM or two 16-bit Thumb) + * r2 = PC value to resume execution after successful emulation * r9 = normal "successful" return address - * r10 = this threads thread_info structure. + * r10 = this threads thread_info structure * lr = unrecognised instruction return address + * IRQs disabled, FIQs enabled. */ @ @ Fall-through from Thumb-2 __und_usr @@ -659,12 +687,17 @@ ENTRY(no_fp) mov pc, lr ENDPROC(no_fp) -__und_usr_unknown: - enable_irq +__und_usr_fault_32: + mov r1, #4 + b 1f +__und_usr_fault_16: + mov r1, #2 +1: enable_irq mov r0, sp adr lr, BSYM(ret_from_exception) - b do_undefinstr -ENDPROC(__und_usr_unknown) + b __und_fault +ENDPROC(__und_usr_fault_32) +ENDPROC(__und_usr_fault_16) .align 5 __pabt_usr: diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 49d9f93052476b51e0136b760312b7d829cf4899..978eac57e04a783f8901a16986f6d88f96f125ba 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -51,23 +51,15 @@ ret_fast_syscall: fast_work_pending: str r0, [sp, #S_R0+S_OFF]! @ returned r0 work_pending: - tst r1, #_TIF_NEED_RESCHED - bne work_resched - /* - * TIF_SIGPENDING or TIF_NOTIFY_RESUME must've been set if we got here - */ - ldr r2, [sp, #S_PSR] mov r0, sp @ 'regs' - tst r2, #15 @ are we returning to user mode? - bne no_work_pending @ no? just leave, then... mov r2, why @ 'syscall' - tst r1, #_TIF_SIGPENDING @ delivering a signal? - movne why, #0 @ prevent further restarts - bl do_notify_resume - b ret_slow_syscall @ Check work again + bl do_work_pending + cmp r0, #0 + beq no_work_pending + movlt scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE) + ldmia sp, {r0 - r6} @ have to reload r0 - r6 + b local_restart @ ... and off we go -work_resched: - bl schedule /* * "slow" syscall return path. "why" tells us if this was a real syscall. */ @@ -409,6 +401,7 @@ ENTRY(vector_swi) eor scno, scno, #__NR_SYSCALL_BASE @ check OS number #endif +local_restart: ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing stmdb sp!, {r4, r5} @ push fifth and sixth args @@ -450,7 +443,8 @@ __sys_trace: mov scno, r0 @ syscall number (possibly new) add r1, sp, #S_R0 + S_OFF @ pointer to regs cmp scno, #NR_syscalls @ check upper syscall limit - ldmccia r1, {r0 - r3} @ have to reload r0 - r3 + ldmccia r1, {r0 - r6} @ have to reload r0 - r6 + stmccia sp, {r4, r5} @ and update the stack args ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine b 2b diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index df0bf0c8cb790a5ee501c55a204a45ddbcb48aab..34e56647dceeee88d99f65d5fd0a6e00fb46a0fd 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -179,19 +179,20 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, old = *parent; *parent = return_hooker; - err = ftrace_push_return_trace(old, self_addr, &trace.depth, - frame_pointer); - if (err == -EBUSY) { - *parent = old; - return; - } - trace.func = self_addr; + trace.depth = current->curr_ret_stack + 1; /* Only trace if the calling function expects to */ if (!ftrace_graph_entry(&trace)) { - current->curr_ret_stack--; *parent = old; + return; + } + + err = ftrace_push_return_trace(old, self_addr, &trace.depth, + frame_pointer); + if (err == -EBUSY) { + *parent = old; + return; } } diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index ba386bd94107642d9819a7d8bafb7ba04e92b83f..281bf3301241fba2a1ce1baafeaf3020b7cd57ff 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -159,6 +159,12 @@ static int debug_arch_supported(void) arch >= ARM_DEBUG_ARCH_V7_1; } +/* Can we determine the watchpoint access type from the fsr? */ +static int debug_exception_updates_fsr(void) +{ + return 0; +} + /* Determine number of WRP registers available. */ static int get_num_wrp_resources(void) { @@ -604,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) /* Aligned */ break; case 1: - /* Allow single byte watchpoint. */ - if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) - break; case 2: /* Allow halfword watchpoints and breakpoints. */ if (info->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + case 3: + /* Allow single byte watchpoint. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; default: ret = -EINVAL; goto out; @@ -619,18 +626,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) info->address &= ~alignment_mask; info->ctrl.len <<= offset; - /* - * Currently we rely on an overflow handler to take - * care of single-stepping the breakpoint when it fires. - * In the case of userspace breakpoints on a core with V7 debug, - * we can use the mismatch feature as a poor-man's hardware - * single-step, but this only works for per-task breakpoints. - */ - if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || - !core_has_mismatch_brps() || !bp->hw.bp_target)) { - pr_warning("overflow handler required but none found\n"); - ret = -EINVAL; + if (!bp->overflow_handler) { + /* + * Mismatch breakpoints are required for single-stepping + * breakpoints. + */ + if (!core_has_mismatch_brps()) + return -EINVAL; + + /* We don't allow mismatch breakpoints in kernel space. */ + if (arch_check_bp_in_kernelspace(bp)) + return -EPERM; + + /* + * Per-cpu breakpoints are not supported by our stepping + * mechanism. + */ + if (!bp->hw.bp_target) + return -EINVAL; + + /* + * We only support specific access types if the fsr + * reports them. + */ + if (!debug_exception_updates_fsr() && + (info->ctrl.type == ARM_BREAKPOINT_LOAD || + info->ctrl.type == ARM_BREAKPOINT_STORE)) + return -EINVAL; } + out: return ret; } @@ -706,10 +730,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr, goto unlock; /* Check that the access type matches. */ - access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W : - HW_BREAKPOINT_R; - if (!(access & hw_breakpoint_type(wp))) - goto unlock; + if (debug_exception_updates_fsr()) { + access = (fsr & ARM_FSR_ACCESS_MASK) ? + HW_BREAKPOINT_W : HW_BREAKPOINT_R; + if (!(access & hw_breakpoint_type(wp))) + goto unlock; + } /* We have a winner. */ info->trigger = addr; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 19c95ea65b2f25c25371734a7a03f147e929978e..693b744fd572f163f053c9fef42d563e246e04d3 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -247,6 +247,7 @@ void machine_shutdown(void) void machine_halt(void) { machine_shutdown(); + local_irq_disable(); while (1); } @@ -268,6 +269,7 @@ void machine_restart(char *cmd) /* Whoops - the platform was unable to reboot. Tell the user! */ printk("Reboot failed -- System halted\n"); + local_irq_disable(); while (1); } diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index dab711e6e1ca444c30f960177c12149add9ca2e6..3e0fc5f7ed4b05cb09df7c58f7098492176a568b 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 27d186abbc06f8aa3aa6310faa5b67039d447f03..f4515393248dab76b97700f55ef17bba68e6cd0a 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -21,6 +21,8 @@ struct clock_data { u32 epoch_cyc_copy; u32 mult; u32 shift; + bool suspended; + bool needs_suspend; }; static void sched_clock_poll(unsigned long wrap_ticks); @@ -49,6 +51,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) u64 epoch_ns; u32 epoch_cyc; + if (cd.suspended) + return cd.epoch_ns; + /* * Load the epoch_cyc and epoch_ns atomically. We do this by * ensuring that we always write epoch_cyc, epoch_ns and @@ -98,6 +103,13 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } +void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate) +{ + setup_sched_clock(read, bits, rate); + cd.needs_suspend = true; +} + void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -169,11 +181,23 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); + if (cd.needs_suspend) + cd.suspended = true; return 0; } +static void sched_clock_resume(void) +{ + if (cd.needs_suspend) { + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; + } +} + static struct syscore_ops sched_clock_ops = { .suspend = sched_clock_suspend, + .resume = sched_clock_resume, }; static int __init sched_clock_syscore_init(void) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index e15d83bb4ea378c1316db6a7d705eab30248a98b..a81dcecc734388f7745e399e38504645f4e0e758 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -508,7 +508,7 @@ void __init dump_machine_table(void) /* can't use cpu_relax() here as it may require MMU setup */; } -int __init arm_add_memory(phys_addr_t start, unsigned long size) +int __init arm_add_memory(phys_addr_t start, phys_addr_t size) { struct membank *bank = &meminfo.bank[meminfo.nr_banks]; @@ -538,7 +538,7 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size) } #endif - bank->size = size & PAGE_MASK; + bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1); /* * Check whether this memory region has non-zero size or @@ -558,7 +558,7 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size) static int __init early_mem(char *p) { static int usermem __initdata = 0; - unsigned long size; + phys_addr_t size; phys_addr_t start; char *endp; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 536c5d6b340b7fca2aee9c770000372c38be98bb..f27789e4e38aaad749e05426d042cffe7912b5c7 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -27,7 +27,6 @@ */ #define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)) #define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)) -#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE) /* * With EABI, the syscall number has to be loaded into r7. @@ -47,18 +46,6 @@ const unsigned long sigreturn_codes[7] = { MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN, }; -/* - * Either we support OABI only, or we have EABI with the OABI - * compat layer enabled. In the later case we don't know if - * user space is EABI or not, and if not we must not clobber r7. - * Always using the OABI syscall solves that issue and works for - * all those cases. - */ -const unsigned long syscall_restart_code[2] = { - SWI_SYS_RESTART, /* swi __NR_restart_syscall */ - 0xe49df004, /* ldr pc, [sp], #4 */ -}; - /* * atomically swap in the new signal mask, and wait for a signal. */ @@ -582,12 +569,13 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, * the kernel can handle, and then we build all the user-level signal handling * stack-frames in one go after that. */ -static void do_signal(struct pt_regs *regs, int syscall) +static int do_signal(struct pt_regs *regs, int syscall) { unsigned int retval = 0, continue_addr = 0, restart_addr = 0; struct k_sigaction ka; siginfo_t info; int signr; + int restart = 0; /* * If we were from a system call, check for system call restarting... @@ -602,15 +590,15 @@ static void do_signal(struct pt_regs *regs, int syscall) * debugger will see the already changed PSW. */ switch (retval) { + case -ERESTART_RESTARTBLOCK: + restart -= 2; case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: + restart++; regs->ARM_r0 = regs->ARM_ORIG_r0; regs->ARM_pc = restart_addr; break; - case -ERESTART_RESTARTBLOCK: - regs->ARM_r0 = -EINTR; - break; } } @@ -619,14 +607,17 @@ static void do_signal(struct pt_regs *regs, int syscall) * point the debugger may change all our registers ... */ signr = get_signal_to_deliver(&info, &ka, regs, NULL); + /* + * Depending on the signal settings we may need to revert the + * decision to restart the system call. But skip this if a + * debugger has chosen to restart at a different PC. + */ + if (regs->ARM_pc != restart_addr) + restart = 0; if (signr > 0) { - /* - * Depending on the signal settings we may need to revert the - * decision to restart the system call. But skip this if a - * debugger has chosen to restart at a different PC. - */ - if (regs->ARM_pc == restart_addr) { - if (retval == -ERESTARTNOHAND + if (unlikely(restart)) { + if (retval == -ERESTARTNOHAND || + retval == -ERESTART_RESTARTBLOCK || (retval == -ERESTARTSYS && !(ka.sa.sa_flags & SA_RESTART))) { regs->ARM_r0 = -EINTR; @@ -635,52 +626,43 @@ static void do_signal(struct pt_regs *regs, int syscall) } handle_signal(signr, &ka, &info, regs); - return; - } - - if (syscall) { - /* - * Handle restarting a different system call. As above, - * if a debugger has chosen to restart at a different PC, - * ignore the restart. - */ - if (retval == -ERESTART_RESTARTBLOCK - && regs->ARM_pc == continue_addr) { - if (thumb_mode(regs)) { - regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE; - regs->ARM_pc -= 2; - } else { -#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT) - regs->ARM_r7 = __NR_restart_syscall; - regs->ARM_pc -= 4; -#else - u32 __user *usp; - - regs->ARM_sp -= 4; - usp = (u32 __user *)regs->ARM_sp; - - if (put_user(regs->ARM_pc, usp) == 0) { - regs->ARM_pc = KERN_RESTART_CODE; - } else { - regs->ARM_sp += 4; - force_sigsegv(0, current); - } -#endif - } - } + return 0; } restore_saved_sigmask(); + if (unlikely(restart)) + regs->ARM_pc = continue_addr; + return restart; } -asmlinkage void -do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall) +asmlinkage int +do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) { - if (thread_flags & _TIF_SIGPENDING) - do_signal(regs, syscall); - - if (thread_flags & _TIF_NOTIFY_RESUME) { - clear_thread_flag(TIF_NOTIFY_RESUME); - tracehook_notify_resume(regs); - } + do { + if (likely(thread_flags & _TIF_NEED_RESCHED)) { + schedule(); + } else { + if (unlikely(!user_mode(regs))) + return 0; + local_irq_enable(); + if (thread_flags & _TIF_SIGPENDING) { + int restart = do_signal(regs, syscall); + if (unlikely(restart)) { + /* + * Restart without handlers. + * Deal with it without leaving + * the kernel space. + */ + return restart; + } + syscall = 0; + } else { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } + } + local_irq_disable(); + thread_flags = current_thread_info()->flags; + } while (thread_flags & _TIF_WORK_MASK); + return 0; } diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index 6fcfe8398aa473051fbf72396986a84dc700978f..5ff067b7c7522f428b4343832ecb759b7ccf16de 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -8,7 +8,5 @@ * published by the Free Software Foundation. */ #define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) -#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes)) extern const unsigned long sigreturn_codes[7]; -extern const unsigned long syscall_restart_code[2]; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index aea74f5bc34abdcefbd90570e3c1b7e534b29763..ebd8ad274d76bb82488240e9543d7a1d99b5c674 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -563,7 +563,8 @@ void smp_send_stop(void) cpumask_copy(&mask, cpu_online_mask); cpumask_clear_cpu(smp_processor_id(), &mask); - smp_cross_call(&mask, IPI_CPU_STOP); + if (!cpumask_empty(&mask)) + smp_cross_call(&mask, IPI_CPU_STOP); /* Wait up to one second for other CPUs to stop */ timeout = USEC_PER_SEC; diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index fef42b21cecba517e67e8ed74ef8c88d3cfd2afd..e1f906989bb8161963d8a714073a8d84a8e2c2e6 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -96,7 +95,52 @@ static void twd_timer_stop(struct clock_event_device *clk) disable_percpu_irq(clk->irq); } -#ifdef CONFIG_CPU_FREQ +#ifdef CONFIG_COMMON_CLK + +/* + * Updates clockevent frequency when the cpu frequency changes. + * Called on the cpu that is changing frequency with interrupts disabled. + */ +static void twd_update_frequency(void *new_rate) +{ + twd_timer_rate = *((unsigned long *) new_rate); + + clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate); +} + +static int twd_rate_change(struct notifier_block *nb, + unsigned long flags, void *data) +{ + struct clk_notifier_data *cnd = data; + + /* + * The twd clock events must be reprogrammed to account for the new + * frequency. The timer is local to a cpu, so cross-call to the + * changing cpu. + */ + if (flags == POST_RATE_CHANGE) + smp_call_function(twd_update_frequency, + (void *)&cnd->new_rate, 1); + + return NOTIFY_OK; +} + +static struct notifier_block twd_clk_nb = { + .notifier_call = twd_rate_change, +}; + +static int twd_clk_init(void) +{ + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) + return clk_notifier_register(twd_clk, &twd_clk_nb); + + return 0; +} +core_initcall(twd_clk_init); + +#elif defined (CONFIG_CPU_FREQ) + +#include /* * Updates clockevent frequency when the cpu frequency changes. diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 198b08456e905e42d1c09819083c003d9a59e988..26c12c6440fcde02a3829f1ed3e1035f16ed6338 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -321,7 +321,7 @@ void store_cpu_topology(unsigned int cpuid) * init_cpu_topology is called at boot when only one cpu is running * which prevent simultaneous write access to cpu_topology array */ -void init_cpu_topology(void) +void __init init_cpu_topology(void) { unsigned int cpu; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 8b97d739b17b1040f4f3e4bb7fe069d84808fa72..b0179b89a04ce26062184aaf23f86c521fb3009c 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -402,18 +402,10 @@ static int call_undef_hook(struct pt_regs *regs, unsigned int instr) asmlinkage void __exception do_undefinstr(struct pt_regs *regs) { - unsigned int correction = thumb_mode(regs) ? 2 : 4; unsigned int instr; siginfo_t info; void __user *pc; - /* - * According to the ARM ARM, PC is 2 or 4 bytes ahead, - * depending whether we're in Thumb mode or not. - * Correct this offset. - */ - regs->ARM_pc -= correction; - pc = (void __user *)instruction_pointer(regs); if (processor_mode(regs) == SVC_MODE) { @@ -428,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) #endif instr = *(u32 *) pc; } else if (thumb_mode(regs)) { - get_user(instr, (u16 __user *)pc); + if (get_user(instr, (u16 __user *)pc)) + goto die_sig; if (is_wide_instruction(instr)) { unsigned int instr2; - get_user(instr2, (u16 __user *)pc+1); + if (get_user(instr2, (u16 __user *)pc+1)) + goto die_sig; instr <<= 16; instr |= instr2; } - } else { - get_user(instr, (u32 __user *)pc); + } else if (get_user(instr, (u32 __user *)pc)) { + goto die_sig; } if (call_undef_hook(regs, instr) == 0) return; +die_sig: #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_UNDEFINED) { printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n", @@ -852,8 +847,6 @@ void __init early_trap_init(void *vectors_base) */ memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE), sigreturn_codes, sizeof(sigreturn_codes)); - memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE), - syscall_restart_code, sizeof(syscall_restart_code)); flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 2473fd1fd51cfa50ef02985e6e8d83c5f97119c8..af72969820b4951448c9d95135383ae9d8387cde 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -16,13 +16,30 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ call_with_stack.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o -mmu-y += copy_from_user.o copy_to_user.o + +# the code in uaccess.S is not preemption safe and +# probably faster on ARMv3 only +ifeq ($(CONFIG_PREEMPT),y) + mmu-y += copy_from_user.o copy_to_user.o +else +ifneq ($(CONFIG_CPU_32v3),y) + mmu-y += copy_from_user.o copy_to_user.o +else + mmu-y += uaccess.o +endif +endif # using lib_ here won't override already available weak symbols obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o -lib-$(CONFIG_MMU) += $(mmu-y) -lib-y += io-readsw-armv4.o io-writesw-armv4.o +lib-$(CONFIG_MMU) += $(mmu-y) + +ifeq ($(CONFIG_CPU_32v3),y) + lib-y += io-readsw-armv3.o io-writesw-armv3.o +else + lib-y += io-readsw-armv4.o io-writesw-armv4.o +endif + lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o lib-$(CONFIG_ARCH_SHARK) += io-shark.o diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index d6dacc69254e47ddca3f399cc6f37eef12b073d8..395d5fbb8fa20c01c8b71d37dce42df700820c91 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -59,6 +59,7 @@ void __init init_current_timer_delay(unsigned long freq) { pr_info("Switching to timer-based delay loop\n"); lpj_fine = freq / HZ; + loops_per_jiffy = lpj_fine; arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay; diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 11093a7c3e32289e95a8c100cc01ef2bbb8d7101..9b06bb41fca659b9bbfc2f996e703ce2b8c315aa 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -16,8 +16,9 @@ * __get_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * Outputs: r0 is the error code - * r2, r3 contains the zero-extended value + * r2 contains the zero-extended value * lr corrupted * * No other registers must be altered. (see @@ -27,33 +28,39 @@ * Note also that it is intended that __get_user_bad is not global. */ #include +#include #include #include ENTRY(__get_user_1) + check_uaccess r0, 1, r1, r2, __get_user_bad 1: TUSER(ldrb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_1) ENTRY(__get_user_2) -#ifdef CONFIG_THUMB2_KERNEL -2: TUSER(ldrb) r2, [r0] -3: TUSER(ldrb) r3, [r0, #1] + check_uaccess r0, 2, r1, r2, __get_user_bad +#ifdef CONFIG_CPU_USE_DOMAINS +rb .req ip +2: ldrbt r2, [r0], #1 +3: ldrbt rb, [r0], #0 #else -2: TUSER(ldrb) r2, [r0], #1 -3: TUSER(ldrb) r3, [r0] +rb .req r0 +2: ldrb r2, [r0] +3: ldrb rb, [r0, #1] #endif #ifndef __ARMEB__ - orr r2, r2, r3, lsl #8 + orr r2, r2, rb, lsl #8 #else - orr r2, r3, r2, lsl #8 + orr r2, rb, r2, lsl #8 #endif mov r0, #0 mov pc, lr ENDPROC(__get_user_2) ENTRY(__get_user_4) + check_uaccess r0, 4, r1, r2, __get_user_bad 4: TUSER(ldr) r2, [r0] mov r0, #0 mov pc, lr diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S new file mode 100644 index 0000000000000000000000000000000000000000..88487c8c4f2353f7f512bd6dbecb019e93e72004 --- /dev/null +++ b/arch/arm/lib/io-readsw-armv3.S @@ -0,0 +1,106 @@ +/* + * linux/arch/arm/lib/io-readsw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +.Linsw_bad_alignment: + adr r0, .Linsw_bad_align_msg + mov r2, lr + b panic +.Linsw_bad_align_msg: + .asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Linsw_align: tst r1, #1 + bne .Linsw_bad_alignment + + ldr r3, [r0] + strb r3, [r1], #1 + mov r3, r3, lsr #8 + strb r3, [r1], #1 + + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_readsw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Linsw_align + +.Linsw_aligned: mov ip, #0xff + orr ip, ip, ip, lsl #8 + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_insw_8 + +.Linsw_8_lp: ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + ldr r5, [r0] + and r5, r5, ip + ldr r6, [r0] + orr r5, r5, r6, lsl #16 + + ldr r6, [r0] + and r6, r6, ip + ldr lr, [r0] + orr r6, r6, lr, lsl #16 + + stmia r1!, {r3 - r6} + + subs r2, r2, #8 + bpl .Linsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + stmia r1!, {r3, r4} + +.Lno_insw_4: tst r2, #2 + beq .Lno_insw_2 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + str r3, [r1], #4 + +.Lno_insw_2: tst r2, #1 + ldrne r3, [r0] + strneb r3, [r1], #1 + movne r3, r3, lsr #8 + strneb r3, [r1] + + ldmfd sp!, {r4, r5, r6, pc} + + diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S new file mode 100644 index 0000000000000000000000000000000000000000..49b800419e32ca6b6dbed9c27d0ee4e3960b639b --- /dev/null +++ b/arch/arm/lib/io-writesw-armv3.S @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/lib/io-writesw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +.Loutsw_bad_alignment: + adr r0, .Loutsw_bad_align_msg + mov r2, lr + b panic +.Loutsw_bad_align_msg: + .asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Loutsw_align: tst r1, #1 + bne .Loutsw_bad_alignment + + add r1, r1, #2 + + ldr r3, [r1, #-4] + mov r3, r3, lsr #16 + orr r3, r3, r3, lsl #16 + str r3, [r0] + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_writesw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Loutsw_align + + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_outsw_8 + +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r5, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r5, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r6, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r6, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + subs r2, r2, #8 + bpl .Loutsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 + + ldmia r1!, {r3, r4} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_4: tst r2, #2 + beq .Lno_outsw_2 + + ldr r3, [r1], #4 + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_2: tst r2, #1 + + ldrne r3, [r1] + + movne ip, r3, lsl #16 + orrne ip, ip, ip, lsr #16 + strne ip, [r0] + + ldmfd sp!, {r4, r5, r6, pc} diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 7db25990c589f3d98554d9aee47cf7b5c3c486fd..3d73dcb959b0da83bc8affe3a781b7fcbdb17752 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -16,6 +16,7 @@ * __put_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * r2, r3 contains the value * Outputs: r0 is the error code * lr corrupted @@ -27,16 +28,19 @@ * Note also that it is intended that __put_user_bad is not global. */ #include +#include #include #include ENTRY(__put_user_1) + check_uaccess r0, 1, r1, ip, __put_user_bad 1: TUSER(strb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_1) ENTRY(__put_user_2) + check_uaccess r0, 2, r1, ip, __put_user_bad mov ip, r2, lsr #8 #ifdef CONFIG_THUMB2_KERNEL #ifndef __ARMEB__ @@ -60,12 +64,14 @@ ENTRY(__put_user_2) ENDPROC(__put_user_2) ENTRY(__put_user_4) + check_uaccess r0, 4, r1, ip, __put_user_bad 4: TUSER(str) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_4) ENTRY(__put_user_8) + check_uaccess r0, 8, r1, ip, __put_user_bad #ifdef CONFIG_THUMB2_KERNEL 5: TUSER(str) r2, [r0] 6: TUSER(str) r3, [r0, #4] diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S new file mode 100644 index 0000000000000000000000000000000000000000..5c908b1cb8ed5db3eeabfb89f7f659f99d2d6f76 --- /dev/null +++ b/arch/arm/lib/uaccess.S @@ -0,0 +1,564 @@ +/* + * linux/arch/arm/lib/uaccess.S + * + * Copyright (C) 1995, 1996,1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Routines to block copy data to/from user memory + * These are highly optimised both for the 4k page size + * and for various alignments. + */ +#include +#include +#include +#include + + .text + +#define PAGE_SHIFT 12 + +/* Prototype: int __copy_to_user(void *to, const char *from, size_t n) + * Purpose : copy a block to user memory from kernel memory + * Params : to - user memory + * : from - kernel memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ + +.Lc2u_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + sub r2, r2, ip + b .Lc2u_dest_aligned + +ENTRY(__copy_to_user) + stmfd sp!, {r2, r4 - r7, lr} + cmp r2, #4 + blt .Lc2u_not_enough + ands ip, r0, #3 + bne .Lc2u_dest_not_aligned +.Lc2u_dest_aligned: + + ands ip, r1, #3 + bne .Lc2u_src_not_aligned +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lc2u_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_0nowords + ldr r3, [r1], #4 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lc2u_0rem8lp + +.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6} + stmia r0!, {r3 - r6} @ Shouldnt fault + ldmia r1!, {r3 - r6} + subs ip, ip, #32 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_0cpy8lp + +.Lc2u_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} + stmgeia r0!, {r3 - r6} @ Shouldnt fault + tst ip, #8 + ldmneia r1!, {r3 - r4} + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + ldrne r3, [r1], #4 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_0fupi +.Lc2u_0nowords: teq ip, #0 + beq .Lc2u_finished +.Lc2u_nowords: cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_not_enough: + movs ip, r2 + bne .Lc2u_nowords +.Lc2u_finished: mov r0, #0 + ldmfd sp!, {r2, r4 - r7, pc} + +.Lc2u_src_not_aligned: + bic r1, r1, #3 + ldr r7, [r1], #4 + cmp ip, #2 + bgt .Lc2u_3fupi + beq .Lc2u_2fupi +.Lc2u_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_1nowords + mov r3, r7, pull #8 + ldr r7, [r1], #4 + orr r3, r3, r7, push #24 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_1rem8lp + +.Lc2u_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_1cpy8lp + +.Lc2u_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #8 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #24 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_1fupi +.Lc2u_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_2 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + movgt r3, r7, get_byte_3 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_2nowords + mov r3, r7, pull #16 + ldr r7, [r1], #4 + orr r3, r3, r7, push #16 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_2rem8lp + +.Lc2u_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_2cpy8lp + +.Lc2u_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #16 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #16 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_2fupi +.Lc2u_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_3 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_3nowords + mov r3, r7, pull #24 + ldr r7, [r1], #4 + orr r3, r3, r7, push #8 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_3rem8lp + +.Lc2u_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_3cpy8lp + +.Lc2u_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #24 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #8 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_3fupi +.Lc2u_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished +ENDPROC(__copy_to_user) + + .pushsection .fixup,"ax" + .align 0 +9001: ldmfd sp!, {r0, r4 - r7, pc} + .popsection + +/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); + * Purpose : copy a block from user memory to kernel memory + * Params : to - kernel memory + * : from - user memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ +.Lcfu_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + sub r2, r2, ip + b .Lcfu_dest_aligned + +ENTRY(__copy_from_user) + stmfd sp!, {r0, r2, r4 - r7, lr} + cmp r2, #4 + blt .Lcfu_not_enough + ands ip, r0, #3 + bne .Lcfu_dest_not_aligned +.Lcfu_dest_aligned: + ands ip, r1, #3 + bne .Lcfu_src_not_aligned + +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lcfu_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_0nowords +USER( TUSER( ldr) r3, [r1], #4) + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lcfu_0rem8lp + +.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault + stmia r0!, {r3 - r6} + ldmia r1!, {r3 - r6} @ Shouldnt fault + subs ip, ip, #32 + stmia r0!, {r3 - r6} + bpl .Lcfu_0cpy8lp + +.Lcfu_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} @ Shouldnt fault + stmgeia r0!, {r3 - r6} + tst ip, #8 + ldmneia r1!, {r3 - r4} @ Shouldnt fault + stmneia r0!, {r3 - r4} + tst ip, #4 + TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_0fupi +.Lcfu_0nowords: teq ip, #0 + beq .Lcfu_finished +.Lcfu_nowords: cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_not_enough: + movs ip, r2 + bne .Lcfu_nowords +.Lcfu_finished: mov r0, #0 + add sp, sp, #8 + ldmfd sp!, {r4 - r7, pc} + +.Lcfu_src_not_aligned: + bic r1, r1, #3 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + cmp ip, #2 + bgt .Lcfu_3fupi + beq .Lcfu_2fupi +.Lcfu_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_1nowords + mov r3, r7, pull #8 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #24 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_1rem8lp + +.Lcfu_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} + bpl .Lcfu_1cpy8lp + +.Lcfu_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #8 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #24 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_1fupi +.Lcfu_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_2 + strgeb r3, [r0], #1 + movgt r3, r7, get_byte_3 + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_2nowords + mov r3, r7, pull #16 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #16 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_2rem8lp + + +.Lcfu_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} + bpl .Lcfu_2cpy8lp + +.Lcfu_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #16 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #16 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_2fupi +.Lcfu_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_3 + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_3nowords + mov r3, r7, pull #24 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #8 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_3rem8lp + +.Lcfu_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} @ Shouldnt fault + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} + subs ip, ip, #16 + bpl .Lcfu_3cpy8lp + +.Lcfu_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #24 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #8 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_3fupi +.Lcfu_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished +ENDPROC(__copy_from_user) + + .pushsection .fixup,"ax" + .align 0 + /* + * We took an exception. r0 contains a pointer to + * the byte not copied. + */ +9001: ldr r2, [sp], #4 @ void *to + sub r2, r0, r2 @ bytes copied + ldr r1, [sp], #4 @ unsigned long count + subs r4, r1, r2 @ bytes left to copy + movne r1, r4 + blne __memzero + mov r0, r4 + ldmfd sp!, {r4 - r7, pc} + .popsection + diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 104ca40d8d18908cb463e7ae1cd56790c926d971..aaa443b48c91f121e2f698792fb94bb4d6e2afa6 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void) at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7b9c2ba396edb854cfd78ddef676250a751e60bc..bce572a530ef2c59946e2f574229d905bbfe041b 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -726,6 +726,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, }, }; @@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9260_rtt_device.num_resources = 2; + at91sam9260_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9260_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 8df5c1bdff92f1d1194fa9d64da61e2aa9bc2598..bc2590d712d06b214a81171a90c45c9f00ac9252 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -609,6 +609,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9261_rtt_device.num_resources = 2; + at91sam9261_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9261_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index eb6bbf86fb9f597cc7424a52b459bb04ecff2326..9b6ca734f1a96e6b903f177185fc9d23af2f28e5 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed only for the chosen RTT: * GPBR will serve as the storage for RTC time offset */ - at91sam9263_rtt0_device.num_resources = 2; + at91sam9263_rtt0_device.num_resources = 3; at91sam9263_rtt1_device.num_resources = 1; pdev = &at91sam9263_rtt0_device; r = rtt0_resources; break; case 1: at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 2; + at91sam9263_rtt1_device.num_resources = 3; pdev = &at91sam9263_rtt1_device; r = rtt1_resources; break; @@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void) pdev->name = "rtc-at91sam9"; r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; r[1].end = r[1].start + 3; + r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 06073996a38241d50fb1595c52017a50567d7e44..1b47319ca00b1a72e7c8600e4469b5661529f54a 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9g45_rtt_device.num_resources = 2; + at91sam9g45_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f09fff932172ffec238c10714331d7c8970a53e1..b3d365dadef59740154b808fb05c07806f213dab 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -688,6 +688,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9rl_rtt_device.num_resources = 2; + at91sam9rl_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index de2ec6b8fea7693555c2b25367b4efb1e06cae25..188c82971ebd069ac890f90726660e8181e6848b 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); #define cpu_has_300M_plla() (cpu_is_at91sam9g10()) +#define cpu_has_240M_plla() (cpu_is_at91sam9261() \ + || cpu_is_at91sam9263() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_210M_plla() (cpu_is_at91sam9260()) + #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ @@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock) } else if (cpu_has_800M_plla()) { if (plla.rate_hz > 800000000) pll_overclock = true; + } else if (cpu_has_240M_plla()) { + if (plla.rate_hz > 240000000) + pll_overclock = true; + } else if (cpu_has_210M_plla()) { + if (plla.rate_hz > 210000000) + pll_overclock = true; } else { if (plla.rate_hz > 209000000) pll_overclock = true; diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 5de69f2fcca9fec965fc300b506056c4a1f29e01..f6b9fc70161b43338772a9f092b589aecfb021df 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void) dm644x_init(); } -/* - I2C initialization -*/ -static struct davinci_i2c_platform_data ntosd2_i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static struct i2c_board_info __initdata ntosd2_i2c_info[] = { -}; - -static int ntosd2_init_i2c(void) -{ - int status; - - davinci_init_i2c(&ntosd2_i2c_pdata); - status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type); - if (status == 0) { - status = gpio_direction_input(NTOSD2_MSP430_IRQ); - if (status == 0) { - status = gpio_to_irq(NTOSD2_MSP430_IRQ); - if (status > 0) { - ntosd2_i2c_info[0].irq = status; - i2c_register_board_info(1, - ntosd2_i2c_info, - ARRAY_SIZE(ntosd2_i2c_info)); - } - } - } - return status; -} - static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .wires = 4, .version = MMC_CTLR_VERSION_1 @@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void) { struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; - int status; aemif_clk = clk_get(NULL, "aemif"); clk_enable(aemif_clk); @@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void) platform_add_devices(davinci_ntosd2_devices, ARRAY_SIZE(davinci_ntosd2_devices)); - /* Initialize I2C interface specific for this board */ - status = ntosd2_init_i2c(); - if (status < 0) - pr_warning("davinci_ntosd2_init: msp430 irq setup failed:" - " %d\n", status); - davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_ntosd2_snd_data); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index d1624a315c9a89d97664fedcdc7f9f3ba8ba52de..783eab6845c4ea6d56e0a9575b9e9cb89e5eaf84 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -546,6 +546,7 @@ static struct lcd_ctrl_config lcd_cfg = { .sync_edge = 0, .sync_ctrl = 1, .raster_order = 0, + .fifo_th = 6, }; struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = { diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 4db5de54b6a7e1658639dc8888a79ec8cede8cc7..6321567d8eaa0c97a3cdaba3fe2664cf7a1ece6c 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -102,7 +102,8 @@ void __init dove_ehci1_init(void) void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR); + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, + 1600); } /***************************************************************************** diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index f07fd16e0c9b010243f6df4765743633797ad472..9bc97a5baaa8d25a4e0f8e8901c7821d03dfc4d5 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -20,22 +20,6 @@ #include #include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int irqoff; - BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO); - - irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 : - 3 + irq - IRQ_DOVE_GPIO_24_31; - - orion_gpio_irq_handler(irqoff << 3); - if (irq == IRQ_DOVE_HIGH_GPIO) { - orion_gpio_irq_handler(40); - orion_gpio_irq_handler(48); - orion_gpio_irq_handler(56); - } -} - static void pmu_irq_mask(struct irq_data *d) { int pin = irq_to_pmu(d->irq); @@ -90,6 +74,27 @@ static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc) } } +static int __initdata gpio0_irqs[4] = { + IRQ_DOVE_GPIO_0_7, + IRQ_DOVE_GPIO_8_15, + IRQ_DOVE_GPIO_16_23, + IRQ_DOVE_GPIO_24_31, +}; + +static int __initdata gpio1_irqs[4] = { + IRQ_DOVE_HIGH_GPIO, + 0, + 0, + 0, +}; + +static int __initdata gpio2_irqs[4] = { + 0, + 0, + 0, + 0, +}; + void __init dove_init_irq(void) { int i; @@ -100,19 +105,14 @@ void __init dove_init_irq(void) /* * Initialize gpiolib for GPIOs 0-71. */ - orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START); - irq_set_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler); - - orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START + 32); - irq_set_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler); - - orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START + 64); + orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START, gpio0_irqs); + + orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START + 32, gpio1_irqs); + + orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START + 64, gpio2_irqs); /* * Mask and clear PMU interrupts diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca80307d6d7789c9fe1781dd6d56658f64f72e5..4e574c24581ca2869fa37f96d487879ffe0c016a 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include @@ -734,6 +735,11 @@ static void __init origen_bt_setup(void) s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); } +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -781,6 +787,7 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688d274a8bda5b5657924509d9d0726f41f6..73f2bce097e179822d9a08d4dc14bba6f104888c 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); samsung_keypad_set_platdata(&smdkv310_keypad_data); diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 373c3c00d24cdbbe054a1aae60625d97188e6208..c0bc83a7663ee5877edfc0ff768b63a1ed1a2e30 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -115,7 +115,7 @@ static __init int exynos_pm_dt_parse_domains(void) } #endif /* CONFIG_OF */ -static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, +static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index ca70e5fcc7ac12cbd519d9d8a1b246253fe7f12a..020852d3bdd8bd002710e79aba3e036074fefd55 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #define IRQ_SOURCE(base_addr) (base_addr + 0x00) diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c226e4cfe6eec6181e5e506655223c2f1e1a..d004d37ad9d8595648dbbf981e56391e58432eda 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o @@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -obj-$(CONFIG_CPU_V7) += head-v7.o -AFLAGS_head-v7.o :=-Wa,-march=armv7-a -obj-$(CONFIG_SMP) += platsmp.o +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index fdd8cc87c9feee388ca8a94b0fb46fa20305f33a..d20d4795f4eaebeb633c73ec441c36a661949a47 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -222,10 +222,8 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0"); clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0"); @@ -243,6 +241,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); clk_register_clkdev(clk[iim_ipg], "iim", NULL); - mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); + mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1); return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 7aa6313fb1671bbf975d6cf6407aad3ecee66498..3b6b640eed247ea1b7848c7a7fa01801f0190cde 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0"); - clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0"); + clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); @@ -239,8 +239,8 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0"); - clk_register_clkdev(clk[vpu_baud_gate], "per", "imx-vpu"); - clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "imx-vpu"); + clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0"); + clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0"); clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma"); clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma"); clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0"); @@ -250,8 +250,10 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1"); clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0"); clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma"); - clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma"); + clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); + clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 8e19e70f90f97f121b6379945ebeadc2ae2284ab..1253af2d99715a63f157a9f838230895006d9323 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -130,7 +130,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], "kpp", NULL); + clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index c6422fb10bae37756693f3323f79df62e4fc932e..65fb8bcd86cb1652385ee0320679d04a427f8295 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -230,10 +230,8 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); /* i.mx35 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index f6086693ebd2aa665e29fc7a5d5623caeb0d3d53..4bdcaa97bd9803be209f5deed8b771a4b21094d6 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -303,6 +303,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_prepare_enable(clk[aips_tz2]); /* fec */ clk_prepare_enable(clk[spba]); clk_prepare_enable(clk[emi_fast_gate]); /* fec */ + clk_prepare_enable(clk[emi_slow_gate]); /* eim */ clk_prepare_enable(clk[tmax1]); clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */ diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520b6e223fd3ab4db3227574c7299605e265..4233d9e3531d838e3cad29c9d2dceb012606d378 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,7 +152,7 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, clk_max }; @@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1); + clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 436c5720fe6a40255a2c3bc5ab05378c23855e02..04822932cdd1d13c260b4e950ccb51dec9f4ff39 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -17,6 +17,10 @@ extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data; #define imx27_add_fsl_usb2_udc(pdata) \ imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata) +extern const struct imx_imx27_coda_data imx27_coda_data; +#define imx27_add_coda() \ + imx_add_imx27_coda(&imx27_coda_data) + extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data; #define imx27_add_imx2_wdt() \ imx_add_imx2_wdt(&imx27_imx2_wdt_data) diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S similarity index 100% rename from arch/arm/mach-imx/head-v7.S rename to arch/arm/mach-imx/headsmp.S diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 20ed2d56c1af6a3109ff3ea10843cda25d2a289e..f8f7437c83b82dbb07307e78895e66bb6af320e6 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* spin here until hardware takes it down */ + while (1) + ; } int platform_cpu_disable(unsigned int cpu) diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 2c6ab3273f9e4d4a419e54a4f7cde417fdb213a6..5985ed1b8c9875cffc99ab74233147912ae01eca 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -526,7 +526,8 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ - __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); + __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) | + (1 << 30), mx3_ccm_base + MXC_CCM_RCSR); /* RTC */ /* Get RTC IRQ and register the chip */ diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index f264ddddd47c395404203cdebf43b7dc2206abb0..821d6aac411cb9e5d9d56f8ffb3100b3affa1b6b 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -32,13 +32,13 @@ #include #include #include -#include #include #include #include #include #include #include +#include #include #include #include @@ -233,10 +233,8 @@ static void __init visstrim_camera_init(void) static void __init visstrim_reserve(void) { /* reserve 4 MiB for mx2-camera */ - mx2_camera_base = memblock_alloc(MX2_CAMERA_BUF_SIZE, + mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE, MX2_CAMERA_BUF_SIZE); - memblock_free(mx2_camera_base, MX2_CAMERA_BUF_SIZE); - memblock_remove(mx2_camera_base, MX2_CAMERA_BUF_SIZE); } /* GPIOs used as events for applications */ @@ -405,6 +403,47 @@ static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = { .flags = IMX_SSI_DMA | IMX_SSI_SYN, }; +/* coda */ + +static void __init visstrim_coda_init(void) +{ + struct platform_device *pdev; + int dma; + + pdev = imx27_add_coda(); + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base + MX2_CAMERA_BUF_SIZE, + mx2_camera_base + MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + return; +} + +/* DMA deinterlace */ +static struct platform_device visstrim_deinterlace = { + .name = "m2m-deinterlace", + .id = 0, +}; + +static void __init visstrim_deinterlace_init(void) +{ + int ret = -ENOMEM; + struct platform_device *pdev = &visstrim_deinterlace; + int dma; + + ret = platform_device_register(pdev); + + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, + mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + return; +} + + static void __init visstrim_m10_revision(void) { int exp_version = 0; @@ -467,7 +506,9 @@ static void __init visstrim_m10_board_init(void) platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, &iclink_tvp5150, sizeof(iclink_tvp5150)); gpio_led_register_device(0, &visstrim_m10_led_data); + visstrim_deinterlace_init(); visstrim_camera_init(); + visstrim_coda_init(); } static void __init visstrim_m10_timer_init(void) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608f2a764a9be584ea1bebbe1339f981a259..045b3f6a387dadef095f2900dc5b786464b525fa 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -71,7 +71,7 @@ void imx6q_restart(char mode, const char *cmd) /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - if (IS_ENABLED(CONFIG_PHYLIB)) { + if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); phy_write(phydev, 0x0c, 0x0000); @@ -112,7 +112,7 @@ static void __init imx6q_sabrelite_cko1_setup(void) static void __init imx6q_sabrelite_init(void) { - if (IS_ENABLED(CONFIG_PHYLIB)) + if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); imx6q_sabrelite_cko1_setup(); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index ebf680bebdf2ad95a1928f6895f2a77fa60e9236..3fa6c51390da0723ab904e17aed5a2dc7b869afe 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 7b1055c8e0b98c6619473ca4bca9cd711ccc316c..3b2267529f5e308cc1c47c048375ffedd5a60f9a 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -456,7 +456,7 @@ static void __init ap_init_timer(void) clk = clk_get_sys("ap_timer", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); rate = clk_get_rate(clk); writel(0, TIMER0_VA_BASE + TIMER_CTRL); diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 199764fe0fb06d6d2da5798a2fbfa5610ffdd022..ca5c15a4e626fa4bc9fdb9ead0c4b45da4be3cec 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -80,6 +80,35 @@ config MACH_IB62X0_DT RaidSonic IB-NAS6210 & IB-NAS6220 devices, using Flattened Device Tree. +config MACH_TS219_DT + bool "Device Tree for QNAP TS-11X, TS-21X NAS" + select ARCH_KIRKWOOD_DT + select ARM_APPENDED_DTB + select ARM_ATAG_DTB_COMPAT + help + Say 'Y' here if you want your kernel to support the QNAP + TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and + TS-219P+ Turbo NAS devices using Fattened Device Tree. + There are two different Device Tree descriptions, depending + on if the device is based on an if the board uses the MV6281 + or MV6282. If you have the wrong one, the buttons will not + work. + +config MACH_GOFLEXNET_DT + bool "Seagate GoFlex Net (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Net (Flattened Device Tree). + +config MACH_LSXL_DT + bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using + Flattened Device Tree. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index d2b05907b10e57fea036b5e403f3cb2769dd9c9f..055c85a1cc46336de83e79797b5d66db1b1682b1 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -25,3 +25,6 @@ obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o +obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o +obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o +obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 02edbdf5b0657b70ea23880468ce0f6f862b9761..a13299d758e15540cfd6fef81b399efbe53d1691 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,3 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb +dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 58c2d68f9443a15b2784a069fa5fb07ba4e9d455..4ab35065a144919ac264bd972f125dbf657120de 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -14,13 +14,11 @@ #include #include #include -#include #include #include #include #include #include -#include #include #include #include @@ -35,10 +33,6 @@ static struct mv643xx_eth_platform_data dnskw_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static struct mv_sata_platform_data dnskw_sata_data = { - .n_ports = 2, -}; - static unsigned int dnskw_mpp_config[] __initdata = { MPP13_UART1_TXD, /* Custom ... */ MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */ @@ -73,132 +67,6 @@ static unsigned int dnskw_mpp_config[] __initdata = { 0 }; -static struct gpio_led dns325_led_pins[] = { - { - .name = "dns325:white:power", - .gpio = 26, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "dns325:white:usb", - .gpio = 43, - .active_low = 1, - }, - { - .name = "dns325:red:l_hdd", - .gpio = 28, - .active_low = 1, - }, - { - .name = "dns325:red:r_hdd", - .gpio = 27, - .active_low = 1, - }, - { - .name = "dns325:red:usb", - .gpio = 29, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dns325_led_data = { - .num_leds = ARRAY_SIZE(dns325_led_pins), - .leds = dns325_led_pins, -}; - -static struct platform_device dns325_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dns325_led_data, - }, -}; - -static struct gpio_led dns320_led_pins[] = { - { - .name = "dns320:blue:power", - .gpio = 26, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "dns320:blue:usb", - .gpio = 43, - .active_low = 1, - }, - { - .name = "dns320:orange:l_hdd", - .gpio = 28, - .active_low = 1, - }, - { - .name = "dns320:orange:r_hdd", - .gpio = 27, - .active_low = 1, - }, - { - .name = "dns320:orange:usb", - .gpio = 35, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dns320_led_data = { - .num_leds = ARRAY_SIZE(dns320_led_pins), - .leds = dns320_led_pins, -}; - -static struct platform_device dns320_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dns320_led_data, - }, -}; - -static struct i2c_board_info dns325_i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("lm75", 0x48), - }, - /* Something at 0x0c also */ -}; - -static struct gpio_keys_button dnskw_button_pins[] = { - { - .code = KEY_POWER, - .gpio = 34, - .desc = "Power button", - .active_low = 1, - }, - { - .code = KEY_EJECTCD, - .gpio = 47, - .desc = "USB unmount button", - .active_low = 1, - }, - { - .code = KEY_RESTART, - .gpio = 48, - .desc = "Reset button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data dnskw_button_data = { - .buttons = dnskw_button_pins, - .nbuttons = ARRAY_SIZE(dnskw_button_pins), -}; - -static struct platform_device dnskw_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &dnskw_button_data, - } -}; - /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ static struct gpio_fan_speed dnskw_fan_speed[] = { { 0, 0 }, @@ -245,20 +113,9 @@ void __init dnskw_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&dnskw_ge00_data); - kirkwood_sata_init(&dnskw_sata_data); - kirkwood_i2c_init(); - platform_device_register(&dnskw_button_device); platform_device_register(&dnskw_fan_device); - if (of_machine_is_compatible("dlink,dns-325")) { - i2c_register_board_info(0, dns325_i2c_board_info, - ARRAY_SIZE(dns325_i2c_board_info)); - platform_device_register(&dns325_led_device); - - } else if (of_machine_is_compatible("dlink,dns-320")) - platform_device_register(&dns320_led_device); - /* Register power-off GPIO. */ if (gpio_request(36, "dnskw:power:off") == 0 && gpio_direction_output(36, 0) == 0) diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index 55e357ab2923e95db3848f177a83bb713f1c7baa..aeb234d0d0e33ba402e16e72723a3d80147b7bbd 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -23,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -36,42 +34,6 @@ #include "common.h" #include "mpp.h" -struct mtd_partition dreamplug_partitions[] = { - { - .name = "u-boot", - .size = SZ_512K, - .offset = 0, - }, - { - .name = "u-boot env", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K, - }, - { - .name = "dtb", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K + SZ_512K, - }, -}; - -static const struct flash_platform_data dreamplug_spi_slave_data = { - .type = "mx25l1606e", - .name = "spi_flash", - .parts = dreamplug_partitions, - .nr_parts = ARRAY_SIZE(dreamplug_partitions), -}; - -static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &dreamplug_spi_slave_data, - .irq = -1, - .max_speed_hz = 50000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - static struct mv643xx_eth_platform_data dreamplug_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; @@ -80,45 +42,10 @@ static struct mv643xx_eth_platform_data dreamplug_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(1), }; -static struct mv_sata_platform_data dreamplug_sata_data = { - .n_ports = 1, -}; - static struct mvsdio_platform_data dreamplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ }; -static struct gpio_led dreamplug_led_pins[] = { - { - .name = "dreamplug:blue:bluetooth", - .gpio = 47, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi", - .gpio = 48, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi_ap", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dreamplug_led_data = { - .leds = dreamplug_led_pins, - .num_leds = ARRAY_SIZE(dreamplug_led_pins), -}; - -static struct platform_device dreamplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dreamplug_led_data, - } -}; - static unsigned int dreamplug_mpp_config[] __initdata = { MPP0_SPI_SCn, MPP1_SPI_MOSI, @@ -137,15 +64,8 @@ void __init dreamplug_init(void) */ kirkwood_mpp_conf(dreamplug_mpp_config); - spi_register_board_info(dreamplug_spi_slave_info, - ARRAY_SIZE(dreamplug_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_ehci_init(); kirkwood_ge00_init(&dreamplug_ge00_data); kirkwood_ge01_init(&dreamplug_ge01_data); - kirkwood_sata_init(&dreamplug_sata_data); kirkwood_sdio_init(&dreamplug_mvsdio_data); - - platform_device_register(&dreamplug_leds); } diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index edc3f8a9d45e8eb85b9884b4e52f5e117568a366..e4eb450de301ef5231abfb54b000bef885a4ee2f 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "common.h" static struct of_device_id kirkwood_dt_match_table[] __initdata = { @@ -25,6 +26,16 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = { { } }; +struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL), + {}, +}; + static void __init kirkwood_dt_init(void) { pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); @@ -47,7 +58,6 @@ static void __init kirkwood_dt_init(void) kirkwood_clk_init(); /* internal devices that every board has */ - kirkwood_wdt_init(); kirkwood_xor0_init(); kirkwood_xor1_init(); kirkwood_crypto_init(); @@ -68,7 +78,17 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("raidsonic,ib-nas62x0")) ib62x0_init(); - of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); + if (of_machine_is_compatible("qnap,ts219")) + qnap_dt_ts219_init(); + + if (of_machine_is_compatible("seagate,goflexnet")) + goflexnet_init(); + + if (of_machine_is_compatible("buffalo,lsxl")) + lsxl_init(); + + of_platform_populate(NULL, kirkwood_dt_match_table, + kirkwood_auxdata_lookup, NULL); } static const char *kirkwood_dt_board_compat[] = { @@ -77,6 +97,9 @@ static const char *kirkwood_dt_board_compat[] = { "dlink,dns-325", "iom,iconnect", "raidsonic,ib-nas62x0", + "qnap,ts219", + "seagate,goflexnet", + "buffalo,lsxl", NULL }; @@ -84,7 +107,7 @@ DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") /* Maintainer: Jason Cooper */ .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, + .init_irq = orion_dt_init_irq, .timer = &kirkwood_timer, .init_machine = kirkwood_dt_init, .restart = kirkwood_restart, diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c new file mode 100644 index 0000000000000000000000000000000000000000..413e2c8ef5febabdcbac18428ea425edac4bb6d0 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-goflexnet.c @@ -0,0 +1,71 @@ +/* + * Copyright 2012 (C), Jason Cooper + * + * arch/arm/mach-kirkwood/board-goflexnet.c + * + * Seagate GoFlext Net Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Copied and modified for Seagate GoFlex Net support by + * Joshua Coombs based on ArchLinux ARM's + * GoFlex kernel patches. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data goflexnet_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int goflexnet_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP47_GPIO, /* LED Orange */ + MPP46_GPIO, /* LED Green */ + MPP45_GPIO, /* LED Left Capacity 3 */ + MPP44_GPIO, /* LED Left Capacity 2 */ + MPP43_GPIO, /* LED Left Capacity 1 */ + MPP42_GPIO, /* LED Left Capacity 0 */ + MPP41_GPIO, /* LED Right Capacity 3 */ + MPP40_GPIO, /* LED Right Capacity 2 */ + MPP39_GPIO, /* LED Right Capacity 1 */ + MPP38_GPIO, /* LED Right Capacity 0 */ + 0 +}; + +void __init goflexnet_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(goflexnet_mpp_config); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + pr_err("can't setup GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&goflexnet_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index eddf1df8891f7990ee6ed593c94fbd2649bb4fdf..cfc47f80e73436e20b19e2b7c7a43cba472b7dce 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -18,9 +18,7 @@ #include #include #include -#include #include -#include #include #include #include @@ -33,10 +31,6 @@ static struct mv643xx_eth_platform_data ib62x0_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static struct mv_sata_platform_data ib62x0_sata_data = { - .n_ports = 2, -}; - static unsigned int ib62x0_mpp_config[] __initdata = { MPP0_NF_IO2, MPP1_NF_IO3, @@ -55,69 +49,6 @@ static unsigned int ib62x0_mpp_config[] __initdata = { 0 }; -static struct gpio_led ib62x0_led_pins[] = { - { - .name = "ib62x0:green:os", - .default_trigger = "default-on", - .gpio = 25, - .active_low = 0, - }, - { - .name = "ib62x0:red:os", - .default_trigger = "none", - .gpio = 22, - .active_low = 0, - }, - { - .name = "ib62x0:red:usb_copy", - .default_trigger = "none", - .gpio = 27, - .active_low = 0, - }, -}; - -static struct gpio_led_platform_data ib62x0_led_data = { - .leds = ib62x0_led_pins, - .num_leds = ARRAY_SIZE(ib62x0_led_pins), -}; - -static struct platform_device ib62x0_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &ib62x0_led_data, - } -}; - -static struct gpio_keys_button ib62x0_button_pins[] = { - { - .code = KEY_COPY, - .gpio = 29, - .desc = "USB Copy", - .active_low = 1, - }, - { - .code = KEY_RESTART, - .gpio = 28, - .desc = "Reset", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data ib62x0_button_data = { - .buttons = ib62x0_button_pins, - .nbuttons = ARRAY_SIZE(ib62x0_button_pins), -}; - -static struct platform_device ib62x0_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ib62x0_button_data, - } -}; - static void ib62x0_power_off(void) { gpio_set_value(IB62X0_GPIO_POWER_OFF, 1); @@ -132,9 +63,6 @@ void __init ib62x0_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&ib62x0_ge00_data); - kirkwood_sata_init(&ib62x0_sata_data); - platform_device_register(&ib62x0_led_device); - platform_device_register(&ib62x0_button_device); if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0) pm_power_off = ib62x0_power_off; diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index b0d3cc49269def6d8ab668af574fd8341ec5aca8..d7a9198ed300fd5c5f97a38b6a7ecd7868ed325f 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -19,8 +19,6 @@ #include #include #include -#include -#include #include #include #include @@ -32,50 +30,6 @@ static struct mv643xx_eth_platform_data iconnect_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(11), }; -static struct gpio_led iconnect_led_pins[] = { - { - .name = "led_level", - .gpio = 41, - .default_trigger = "default-on", - }, { - .name = "power:blue", - .gpio = 42, - .default_trigger = "timer", - }, { - .name = "power:red", - .gpio = 43, - }, { - .name = "usb1:blue", - .gpio = 44, - }, { - .name = "usb2:blue", - .gpio = 45, - }, { - .name = "usb3:blue", - .gpio = 46, - }, { - .name = "usb4:blue", - .gpio = 47, - }, { - .name = "otb:blue", - .gpio = 48, - }, -}; - -static struct gpio_led_platform_data iconnect_led_data = { - .leds = iconnect_led_pins, - .num_leds = ARRAY_SIZE(iconnect_led_pins), - .gpio_blink_set = orion_gpio_led_blink_set, -}; - -static struct platform_device iconnect_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &iconnect_led_data, - } -}; - static unsigned int iconnect_mpp_config[] __initdata = { MPP12_GPIO, MPP35_GPIO, @@ -90,12 +44,6 @@ static unsigned int iconnect_mpp_config[] __initdata = { 0 }; -static struct i2c_board_info __initdata iconnect_board_info[] = { - { - I2C_BOARD_INFO("lm63", 0x4c), - }, -}; - static struct mtd_partition iconnect_nand_parts[] = { { .name = "flash", @@ -142,15 +90,11 @@ void __init iconnect_init(void) { kirkwood_mpp_conf(iconnect_mpp_config); kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25); - kirkwood_i2c_init(); - i2c_register_board_info(0, iconnect_board_info, - ARRAY_SIZE(iconnect_board_info)); kirkwood_ehci_init(); kirkwood_ge00_init(&iconnect_ge00_data); platform_device_register(&iconnect_button_device); - platform_device_register(&iconnect_leds); } static int __init iconnect_pci_init(void) diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c new file mode 100644 index 0000000000000000000000000000000000000000..83d8975592f8b40028a48a1d50dfde1e3dc430b1 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -0,0 +1,135 @@ +/* + * Copyright 2012 (C), Michael Walle + * + * arch/arm/mach-kirkwood/board-lsxl.c + * + * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not + * converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data lsxl_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data lsxl_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static unsigned int lsxl_mpp_config[] __initdata = { + MPP10_GPO, /* HDD Power Enable */ + MPP11_GPIO, /* USB Vbus Enable */ + MPP18_GPO, /* FAN High Enable# */ + MPP19_GPO, /* FAN Low Enable# */ + MPP36_GPIO, /* Function Blue LED */ + MPP37_GPIO, /* Alarm LED */ + MPP38_GPIO, /* Info LED */ + MPP39_GPIO, /* Power LED */ + MPP40_GPIO, /* Fan Lock */ + MPP41_GPIO, /* Function Button */ + MPP42_GPIO, /* Power Switch */ + MPP43_GPIO, /* Power Auto Switch */ + MPP48_GPIO, /* Function Red LED */ + 0 +}; + +#define LSXL_GPIO_FAN_HIGH 18 +#define LSXL_GPIO_FAN_LOW 19 +#define LSXL_GPIO_FAN_LOCK 40 + +static struct gpio_fan_alarm lsxl_alarm = { + .gpio = LSXL_GPIO_FAN_LOCK, +}; + +static struct gpio_fan_speed lsxl_speeds[] = { + { + .rpm = 0, + .ctrl_val = 3, + }, { + .rpm = 1500, + .ctrl_val = 1, + }, { + .rpm = 3250, + .ctrl_val = 2, + }, { + .rpm = 5000, + .ctrl_val = 0, + } +}; + +static int lsxl_gpio_list[] = { + LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW, +}; + +static struct gpio_fan_platform_data lsxl_fan_data = { + .num_ctrl = ARRAY_SIZE(lsxl_gpio_list), + .ctrl = lsxl_gpio_list, + .alarm = &lsxl_alarm, + .num_speed = ARRAY_SIZE(lsxl_speeds), + .speed = lsxl_speeds, +}; + +static struct platform_device lsxl_fan_device = { + .name = "gpio-fan", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &lsxl_fan_data, + }, +}; + +/* + * On the LS-XHL/LS-CHLv2, the shutdown process is following: + * - Userland monitors key events until the power switch goes to off position + * - The board reboots + * - U-boot starts and goes into an idle mode waiting for the user + * to move the switch to ON position + * + */ +static void lsxl_power_off(void) +{ + kirkwood_restart('h', NULL); +} + +#define LSXL_GPIO_HDD_POWER 10 +#define LSXL_GPIO_USB_POWER 11 + +void __init lsxl_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(lsxl_mpp_config); + + /* usb and sata power on */ + gpio_set_value(LSXL_GPIO_USB_POWER, 1); + gpio_set_value(LSXL_GPIO_HDD_POWER, 1); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&lsxl_ge00_data); + kirkwood_ge01_init(&lsxl_ge01_data); + platform_device_register(&lsxl_fan_device); + + /* register power-off method */ + pm_power_off = lsxl_power_off; +} diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c new file mode 100644 index 0000000000000000000000000000000000000000..1750e68506c1f1a06db0d37e371c608cfa4e0593 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -0,0 +1,82 @@ +/* + * + * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT + * + * Copyright (C) 2012 Andrew Lunn + * + * Based on the board file ts219-setup.c: + * + * Copyright (C) 2009 Martin Michlmayr + * Copyright (C) 2008 Byron Bradley + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" +#include "tsx1x-common.h" + +static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static unsigned int qnap_ts219_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_SATA1_ACTn, + MPP5_SATA0_ACTn, + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_UART1_TXD, /* PIC controller */ + MPP14_UART1_RXD, /* PIC controller */ + MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ + MPP16_GPIO, /* Reset button (on devices with 88F6281) */ + MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ + MPP37_GPIO, /* Reset button (on devices with 88F6282) */ + MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ + MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ + 0 +}; + +void __init qnap_dt_ts219_init(void) +{ + u32 dev, rev; + + kirkwood_mpp_conf(qnap_ts219_mpp_config); + + kirkwood_pcie_id(&dev, &rev); + if (dev == MV88F6282_DEV_ID) + qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + + kirkwood_ge00_init(&qnap_ts219_ge00_data); + kirkwood_ehci_init(); + + pm_power_off = qnap_tsx1x_power_off; +} + +/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */ +static int __init ts219_pci_init(void) +{ + if (machine_is_ts219()) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} +subsys_initcall(ts219_pci_init); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c9201539ffbd7cb17117278dbce407127887bc56..1201191d7f1bb24c386df88f5fe4de14e172b006 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -276,6 +277,7 @@ void __init kirkwood_clk_init(void) orion_clkdev_add("0", "pcie", pex0); orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "kirkwood-i2s", audio); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., * so should never be gated. @@ -299,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR); + IRQ_KIRKWOOD_GE00_ERR, 1600); /* The interface forgets the MAC address assigned by u-boot if the clock is turned off, so claim the clk now. */ clk_prepare_enable(ge0); @@ -313,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR); + IRQ_KIRKWOOD_GE01_ERR, 1600); clk_prepare_enable(ge1); } @@ -515,6 +517,13 @@ void __init kirkwood_wdt_init(void) void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + + /* + * Some Kirkwood devices allocate their coherent buffers from atomic + * context. Increase size of atomic coherent pool to make sure such + * the allocations won't fail. + */ + init_dma_coherent_pool_size(SZ_1M); } int kirkwood_tclk; diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 9248fa2c165bbaded5a830afbf542bb09ae3e955..304dd1abfdcaf8a9d74071550d59b9dd9a8ba2f9 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -58,6 +58,11 @@ void dreamplug_init(void); #else static inline void dreamplug_init(void) {}; #endif +#ifdef CONFIG_MACH_TS219_DT +void qnap_dt_ts219_init(void); +#else +static inline void qnap_dt_ts219_init(void) {}; +#endif #ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT void dnskw_init(void); @@ -77,6 +82,18 @@ void ib62x0_init(void); static inline void ib62x0_init(void) {}; #endif +#ifdef CONFIG_MACH_GOFLEXNET_DT +void goflexnet_init(void); +#else +static inline void goflexnet_init(void) {}; +#endif + +#ifdef CONFIG_MACH_LSXL_DT +void lsxl_init(void); +#else +static inline void lsxl_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index d933593795985749fce168849dd04b8edf917506..be90b7d0e10bee11eaa9b70013413b0d1d964637 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index c4c68e5b94f145cf1a3d36c4a7b4e281d40d92ba..720063ffa19deb213596d363071fa11eeec79ec7 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -9,20 +9,23 @@ */ #include #include -#include #include -#include #include #include -#include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - BUG_ON(irq < IRQ_KIRKWOOD_GPIO_LOW_0_7); - BUG_ON(irq > IRQ_KIRKWOOD_GPIO_HIGH_16_23); +static int __initdata gpio0_irqs[4] = { + IRQ_KIRKWOOD_GPIO_LOW_0_7, + IRQ_KIRKWOOD_GPIO_LOW_8_15, + IRQ_KIRKWOOD_GPIO_LOW_16_23, + IRQ_KIRKWOOD_GPIO_LOW_24_31, +}; - orion_gpio_irq_handler((irq - IRQ_KIRKWOOD_GPIO_LOW_0_7) << 3); -} +static int __initdata gpio1_irqs[4] = { + IRQ_KIRKWOOD_GPIO_HIGH_0_7, + IRQ_KIRKWOOD_GPIO_HIGH_8_15, + IRQ_KIRKWOOD_GPIO_HIGH_16_23, + 0, +}; void __init kirkwood_init_irq(void) { @@ -32,17 +35,8 @@ void __init kirkwood_init_irq(void) /* * Initialize gpiolib for GPIOs 0-49. */ - orion_gpio_init(0, 32, GPIO_LOW_VIRT_BASE, 0, - IRQ_KIRKWOOD_GPIO_START); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler); - - orion_gpio_init(32, 18, GPIO_HIGH_VIRT_BASE, 0, - IRQ_KIRKWOOD_GPIO_START + 32); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23, - gpio_irq_handler); + orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0, + IRQ_KIRKWOOD_GPIO_START, gpio0_irqs); + orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0, + IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs); } diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index f516e74ce0d5bf1ecc2b20fc874fae1c822c185e..5c3d61ee729a79486a7d2f19f564a774ce64c335 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -14,6 +14,7 @@ #include #include +#include #include #include diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 4304f9519372d972c1d798a5c7a9aa33d3dce954..7e8a5a2e1ec7c210aaf2212d10b32905cebda72b 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev) struct resource *res; int ret = 0; - if (!pdata && !pdata->pool_name) + if (!pdata || !pdata->pool_name) return -ENODEV; info = kzalloc(sizeof(*info), GFP_KERNEL); diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 62b53d710efde1a0a71095b2e9e54186cb454886..a9bc84180d21fb378ff27eafb32bcb2ea81f2e89 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,7 +37,7 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -static void __init __iomem *win_cfg_base(int win) +static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { /* * Find the control register base address for this window. diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b4c53b846c9caa8402ce764aec9f9f254379031a..3057f7d4329a7f3a17b247e5ce31df4e7f21643a 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, - IRQ_MV78XX0_GE_ERR); + IRQ_MV78XX0_GE_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } @@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, - NO_IRQ); + NO_IRQ, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index e421b701663b8bfda904ca151727b7d2456452bc..eff9a750bbe27616977e2a281241467afa213f4f 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -9,19 +9,17 @@ */ #include #include -#include -#include #include #include #include #include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - BUG_ON(irq < IRQ_MV78XX0_GPIO_0_7 || irq > IRQ_MV78XX0_GPIO_24_31); - - orion_gpio_irq_handler((irq - IRQ_MV78XX0_GPIO_0_7) << 3); -} +static int __initdata gpio0_irqs[4] = { + IRQ_MV78XX0_GPIO_0_7, + IRQ_MV78XX0_GPIO_8_15, + IRQ_MV78XX0_GPIO_16_23, + IRQ_MV78XX0_GPIO_24_31, +}; void __init mv78xx0_init_irq(void) { @@ -34,11 +32,7 @@ void __init mv78xx0_init_irq(void) * registers for core #1 are at an offset of 0x18 from those of * core #0.) */ - orion_gpio_init(0, 32, GPIO_VIRT_BASE, + orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0, - IRQ_MV78XX0_GPIO_START); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_24_31, gpio_irq_handler); + IRQ_MV78XX0_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index ccdf83b17cf16030612bdf62c43711f7f926baa6..9a8bbda195b28a2b64e19a01d052990a2d6f1156 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -2,9 +2,6 @@ if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig" -config MXS_OCOTP - bool - config SOC_IMX23 bool select ARM_AMBA @@ -66,7 +63,6 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_MXS_SAIF select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_RTC_STMP3XXX - select MXS_OCOTP help Include support for MX28EVK platform. This includes specific configurations for the board and its peripherals. @@ -94,7 +90,6 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB - select MXS_OCOTP config MODULE_APX4 bool @@ -106,7 +101,6 @@ config MODULE_APX4 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_SAIF - select MXS_OCOTP config MACH_TX28 bool "Ka-Ro TX28 module" diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index e41590ccb437feb62a0a9154778d91a700185521..fed3695a1339d89c754edb10ae382730429625b8 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,7 +1,6 @@ # Common support -obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o +obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o -obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 8dabfe81d07c5f143626f10c57cfb993e87c6a1a..ff886e01a0b0371367ae49f3d0d323e547845478 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -261,7 +261,7 @@ static void __init apx4devkit_init(void) enable_clk_enet_out(); if (IS_BUILTIN(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, + phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK, apx4devkit_phy_fixup); mxsfb_pdata.mode_list = apx4devkit_video_modes; diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index da0e37d408237076ae8dda8255fa00e085f325e5..e1362ce48497e53bc60ef3d81e9ee309f0601bfe 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -54,7 +54,6 @@ static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, .init = mmc_late_init, .cleanup = mmc_cleanup, - .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index f8242aa9b76321229f400ccf2b0bcb4a3f28c1f0..c74daace8cd686482d3c440eb6a4d1a0472947c7 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -36,7 +36,6 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, */ static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, - .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 4007a372481b9a9bfac27c9fa8d55d2ed672fa27..2c0ca8fc3380092380b6e2e683dfa9a17460fadf 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -185,7 +185,6 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot) static struct omap_mmc_platform_data nokia770_mmc2_data = { .nr_slots = 1, - .dma_mask = 0xffffffff, .max_freq = 12000000, .slots[0] = { .set_power = nokia770_mmc_set_power, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index cc71a26723efb0937294bfe777b10aa9a59ed746..355980321c2d19f91ecb55c2dd5b7b1a9c7f67dd 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -288,8 +288,7 @@ palmz71_gpio_setup(int early) } gpio_direction_input(PALMZ71_USBDETECT_GPIO); if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - palmz71_powercable, IRQF_SAMPLE_RANDOM, - "palmz71-cable", NULL)) + palmz71_powercable, 0, "palmz71-cable", NULL)) printk(KERN_ERR "IRQ request for power cable failed!\n"); palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd0fbf76ac793d87580c1d750bad8983a25ef62e..346fd26f3aa62bcbe29757ddaa1c98fb9929c53b 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,12 +62,14 @@ config ARCH_OMAP4 select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP config SOC_OMAP5 bool "TI OMAP5" select CPU_V7 select ARM_GIC select HAVE_SMP + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 @@ -230,10 +232,11 @@ config MACH_OMAP3_PANDORA select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR -config MACH_OMAP3_TOUCHBOOK +config MACH_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y + select OMAP_PACKAGE_CBB config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index f6a24b3f9c4f7b4dd3e381eb3ff7823444d99e70..34c2c7f59f0a855b2be4ddcd5f2ad2a8995995b1 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -255,7 +255,7 @@ obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-display.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o -obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o +obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 74915295482ec849e0d0fefe5fc9a22703ee1f2c..28214483aaba24420e96fde47cf5ce91482a0d29 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ + OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 2c5d0ed75285153d8126e60a030f08630a277635..677357ff61aca74d0c399ae889c7496cbc7e9ffa 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -468,7 +468,6 @@ static struct omap_mmc_platform_data mmc1_data = { .cleanup = n8x0_mmc_cleanup, .shutdown = n8x0_mmc_shutdown, .max_freq = 24000000, - .dma_mask = 0xffffffff, .slots[0] = { .wires = 4, .set_power = n8x0_mmc_set_power, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ef230a0eb5eb13e5cedde6f0a6c540f6a348eae6..0d362e9f9cb9a9854c32b378c5dd058f2f785327 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -58,6 +58,7 @@ #include "hsmmc.h" #include "common-board-devices.h" +#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index df2534de3361d5b9c2317db5cec7222e5993d2fb..ca07264bd3ae7633d370e3ba9047988fd8153bf4 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -34,6 +34,7 @@ #include #include #include +#include #include @@ -46,6 +47,10 @@ #include <../drivers/staging/iio/light/tsl2563.h> #include +#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) +#include +#endif + #include "mux.h" #include "hsmmc.h" #include "common-board-devices.h" @@ -1220,6 +1225,30 @@ static void __init rx51_init_tsc2005(void) gpio_to_irq(RX51_TSC2005_IRQ_GPIO); } +#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) +static struct lirc_rx51_platform_data rx51_lirc_data = { + .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, + .pwm_timer = 9, /* Use GPT 9 for CIR */ +}; + +static struct platform_device rx51_lirc_device = { + .name = "lirc_rx51", + .id = -1, + .dev = { + .platform_data = &rx51_lirc_data, + }, +}; + +static void __init rx51_init_lirc(void) +{ + platform_device_register(&rx51_lirc_device); +} +#else +static void __init rx51_init_lirc(void) +{ +} +#endif + void __init rx51_peripherals_init(void) { rx51_i2c_init(); @@ -1230,6 +1259,7 @@ void __init rx51_peripherals_init(void) rx51_init_wl1251(); rx51_init_tsc2005(); rx51_init_si4713(); + rx51_init_lirc(); spi_register_board_info(rx51_peripherals_spi_board_info, ARRAY_SIZE(rx51_peripherals_spi_board_info)); diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 25bbcc7ca4dce9794676001167a23f36474fbd86..ae27de8899a69207ac90aca52164bb7ccf37a582 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1036,13 +1036,13 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX), - CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX), - CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX), - CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX), - CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX), - CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX), - CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX), - CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX), + CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX), + CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX), + CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX), + CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX), + CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX), + CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX), + CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX), CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX), CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX), CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX), diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index a0d68dbecfa3bb96cd52226b0f8d7965379d1252..f99e65cfb86223c77ed544d1a8fbe6a0c4ad4b51 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -241,6 +241,52 @@ static void omap3_clkdm_deny_idle(struct clockdomain *clkdm) _clkdm_del_autodeps(clkdm); } +static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_add_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap3_clkdm_wakeup(clkdm); + } + + return 0; +} + +static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_del_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap3_clkdm_sleep(clkdm); + } + + return 0; +} + struct clkdm_ops omap2_clkdm_operations = { .clkdm_add_wkdep = omap2_clkdm_add_wkdep, .clkdm_del_wkdep = omap2_clkdm_del_wkdep, @@ -267,6 +313,6 @@ struct clkdm_ops omap3_clkdm_operations = { .clkdm_wakeup = omap3_clkdm_wakeup, .clkdm_allow_idle = omap3_clkdm_allow_idle, .clkdm_deny_idle = omap3_clkdm_deny_idle, - .clkdm_clk_enable = omap2_clkdm_clk_enable, - .clkdm_clk_disable = omap2_clkdm_clk_disable, + .clkdm_clk_enable = omap3xxx_clkdm_clk_enable, + .clkdm_clk_disable = omap3xxx_clkdm_clk_disable, }; diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 766338fe4d347746ee04eb3961452a7b3f8f6aa9..975f6bda0e0b7a84855a2e6c90f8051df747f6a2 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -67,6 +67,7 @@ #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) /* CM_IDLEST_IVA2 */ +#define OMAP3430_ST_IVA2_SHIFT 0 #define OMAP3430_ST_IVA2_MASK (1 << 0) /* CM_IDLEST_PLL_IVA2 */ diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 14734746457c2bd8bdfcabd1ea4681dc4edab36e..c1875862679fc7092044644bf83e6948ecdbe4c8 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; -/* - * ADS7846 driver maybe request a gpio according to the value - * of pdata->get_pendown_state, but we have done this. So set - * get_pendown_state to avoid twice gpio requesting. - */ -static int omap3_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, - .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 4c4ef6a6166ba28b768ee46580b7f35dbafb7885..a0b4a42836ab9f7a29f1757ee410e37a237af00c 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,7 +4,6 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K -#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 02d15bbd4e35c2eb4d90cf892085d143d0334e81..288bee6cbb76f701b9b675476d87c3b8f16b90cb 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -21,6 +21,7 @@ #include "common.h" #include "pm.h" #include "prm.h" +#include "clockdomain.h" /* Machine specific information */ struct omap4_idle_statedata { @@ -47,10 +48,14 @@ static struct omap4_idle_statedata omap4_idle_data[] = { }, }; -static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd; +static struct powerdomain *mpu_pd, *cpu_pd[NR_CPUS]; +static struct clockdomain *cpu_clkdm[NR_CPUS]; + +static atomic_t abort_barrier; +static bool cpu_done[NR_CPUS]; /** - * omap4_enter_idle - Programs OMAP4 to enter the specified state + * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions * @dev: cpuidle device * @drv: cpuidle driver * @index: the index of state to be entered @@ -59,60 +64,84 @@ static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd; * specified low power state selected by the governor. * Returns the amount of time spent in the low power state. */ -static int omap4_enter_idle(struct cpuidle_device *dev, +static int omap4_enter_idle_simple(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + local_fiq_disable(); + omap_do_wfi(); + local_fiq_enable(); + + return index; +} + +static int omap4_enter_idle_coupled(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { struct omap4_idle_statedata *cx = &omap4_idle_data[index]; - u32 cpu1_state; int cpu_id = smp_processor_id(); local_fiq_disable(); /* - * CPU0 has to stay ON (i.e in C1) until CPU1 is OFF state. + * CPU0 has to wait and stay ON until CPU1 is OFF state. * This is necessary to honour hardware recommondation * of triggeing all the possible low power modes once CPU1 is * out of coherency and in OFF mode. - * Update dev->last_state so that governor stats reflects right - * data. */ - cpu1_state = pwrdm_read_pwrst(cpu1_pd); - if (cpu1_state != PWRDM_POWER_OFF) { - index = drv->safe_state_index; - cx = &omap4_idle_data[index]; + if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) { + while (pwrdm_read_pwrst(cpu_pd[1]) != PWRDM_POWER_OFF) { + cpu_relax(); + + /* + * CPU1 could have already entered & exited idle + * without hitting off because of a wakeup + * or a failed attempt to hit off mode. Check for + * that here, otherwise we could spin forever + * waiting for CPU1 off. + */ + if (cpu_done[1]) + goto fail; + + } } - if (index > 0) - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id); /* * Call idle CPU PM enter notifier chain so that * VFP and per CPU interrupt context is saved. */ - if (cx->cpu_state == PWRDM_POWER_OFF) - cpu_pm_enter(); - - pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state); - omap_set_pwrdm_state(mpu_pd, cx->mpu_state); - - /* - * Call idle CPU cluster PM enter notifier chain - * to save GIC and wakeupgen context. - */ - if ((cx->mpu_state == PWRDM_POWER_RET) && - (cx->mpu_logic_state == PWRDM_POWER_OFF)) - cpu_cluster_pm_enter(); + cpu_pm_enter(); + + if (dev->cpu == 0) { + pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state); + omap_set_pwrdm_state(mpu_pd, cx->mpu_state); + + /* + * Call idle CPU cluster PM enter notifier chain + * to save GIC and wakeupgen context. + */ + if ((cx->mpu_state == PWRDM_POWER_RET) && + (cx->mpu_logic_state == PWRDM_POWER_OFF)) + cpu_cluster_pm_enter(); + } omap4_enter_lowpower(dev->cpu, cx->cpu_state); + cpu_done[dev->cpu] = true; + + /* Wakeup CPU1 only if it is not offlined */ + if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) { + clkdm_wakeup(cpu_clkdm[1]); + clkdm_allow_idle(cpu_clkdm[1]); + } /* * Call idle CPU PM exit notifier chain to restore - * VFP and per CPU IRQ context. Only CPU0 state is - * considered since CPU1 is managed by CPU hotplug. + * VFP and per CPU IRQ context. */ - if (pwrdm_read_prev_pwrst(cpu0_pd) == PWRDM_POWER_OFF) - cpu_pm_exit(); + cpu_pm_exit(); /* * Call idle CPU cluster PM exit notifier chain @@ -121,8 +150,11 @@ static int omap4_enter_idle(struct cpuidle_device *dev, if (omap4_mpuss_read_prev_context_state()) cpu_cluster_pm_exit(); - if (index > 0) - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); + +fail: + cpuidle_coupled_parallel_barrier(dev, &abort_barrier); + cpu_done[dev->cpu] = false; local_fiq_enable(); @@ -141,7 +173,7 @@ struct cpuidle_driver omap4_idle_driver = { .exit_latency = 2 + 2, .target_residency = 5, .flags = CPUIDLE_FLAG_TIME_VALID, - .enter = omap4_enter_idle, + .enter = omap4_enter_idle_simple, .name = "C1", .desc = "MPUSS ON" }, @@ -149,8 +181,8 @@ struct cpuidle_driver omap4_idle_driver = { /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ .exit_latency = 328 + 440, .target_residency = 960, - .flags = CPUIDLE_FLAG_TIME_VALID, - .enter = omap4_enter_idle, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, + .enter = omap4_enter_idle_coupled, .name = "C2", .desc = "MPUSS CSWR", }, @@ -158,8 +190,8 @@ struct cpuidle_driver omap4_idle_driver = { /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ .exit_latency = 460 + 518, .target_residency = 1100, - .flags = CPUIDLE_FLAG_TIME_VALID, - .enter = omap4_enter_idle, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, + .enter = omap4_enter_idle_coupled, .name = "C3", .desc = "MPUSS OSWR", }, @@ -168,6 +200,16 @@ struct cpuidle_driver omap4_idle_driver = { .safe_state_index = 0, }; +/* + * For each cpu, setup the broadcast timer because local timers + * stops for the states above C1. + */ +static void omap_setup_broadcast_timer(void *arg) +{ + int cpu = smp_processor_id(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); +} + /** * omap4_idle_init - Init routine for OMAP4 idle * @@ -180,19 +222,31 @@ int __init omap4_idle_init(void) unsigned int cpu_id = 0; mpu_pd = pwrdm_lookup("mpu_pwrdm"); - cpu0_pd = pwrdm_lookup("cpu0_pwrdm"); - cpu1_pd = pwrdm_lookup("cpu1_pwrdm"); - if ((!mpu_pd) || (!cpu0_pd) || (!cpu1_pd)) + cpu_pd[0] = pwrdm_lookup("cpu0_pwrdm"); + cpu_pd[1] = pwrdm_lookup("cpu1_pwrdm"); + if ((!mpu_pd) || (!cpu_pd[0]) || (!cpu_pd[1])) return -ENODEV; - dev = &per_cpu(omap4_idle_dev, cpu_id); - dev->cpu = cpu_id; - - cpuidle_register_driver(&omap4_idle_driver); + cpu_clkdm[0] = clkdm_lookup("mpu0_clkdm"); + cpu_clkdm[1] = clkdm_lookup("mpu1_clkdm"); + if (!cpu_clkdm[0] || !cpu_clkdm[1]) + return -ENODEV; - if (cpuidle_register_device(dev)) { - pr_err("%s: CPUidle register device failed\n", __func__); - return -EIO; + /* Configure the broadcast timer on each cpu */ + on_each_cpu(omap_setup_broadcast_timer, NULL, 1); + + for_each_cpu(cpu_id, cpu_online_mask) { + dev = &per_cpu(omap4_idle_dev, cpu_id); + dev->cpu = cpu_id; +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED + dev->coupled_cpus = *cpu_online_mask; +#endif + cpuidle_register_driver(&omap4_idle_driver); + + if (cpuidle_register_device(dev)) { + pr_err("%s: CPUidle register failed\n", __func__); + return -EIO; + } } return 0; diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 5fb47a14f4ba85211010afa34c439a3f1c73b30c..af1ed7d24a1fbb20fd7e1fffba8ebb1f12bbcca5 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -37,6 +37,7 @@ #define DISPC_CONTROL 0x0040 #define DISPC_CONTROL2 0x0238 +#define DISPC_CONTROL3 0x0848 #define DISPC_IRQSTATUS 0x0018 #define DSS_SYSCONFIG 0x10 @@ -52,6 +53,7 @@ #define EVSYNC_EVEN_IRQ_SHIFT 2 #define EVSYNC_ODD_IRQ_SHIFT 3 #define FRAMEDONE2_IRQ_SHIFT 22 +#define FRAMEDONE3_IRQ_SHIFT 30 #define FRAMEDONETV_IRQ_SHIFT 24 /* @@ -376,7 +378,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) static void dispc_disable_outputs(void) { u32 v, irq_mask = 0; - bool lcd_en, digit_en, lcd2_en = false; + bool lcd_en, digit_en, lcd2_en = false, lcd3_en = false; int i; struct omap_dss_dispc_dev_attr *da; struct omap_hwmod *oh; @@ -405,7 +407,13 @@ static void dispc_disable_outputs(void) lcd2_en = v & LCD_EN_MASK; } - if (!(lcd_en | digit_en | lcd2_en)) + /* store value of LCDENABLE for LCD3 */ + if (da->manager_count > 3) { + v = omap_hwmod_read(oh, DISPC_CONTROL3); + lcd3_en = v & LCD_EN_MASK; + } + + if (!(lcd_en | digit_en | lcd2_en | lcd3_en)) return; /* no managers currently enabled */ /* @@ -426,10 +434,12 @@ static void dispc_disable_outputs(void) if (lcd2_en) irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT; + if (lcd3_en) + irq_mask |= 1 << FRAMEDONE3_IRQ_SHIFT; /* * clear any previous FRAMEDONE, FRAMEDONETV, - * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts + * EVSYNC_EVEN/ODD, FRAMEDONE2 or FRAMEDONE3 interrupts */ omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS); @@ -445,12 +455,19 @@ static void dispc_disable_outputs(void) omap_hwmod_write(v, oh, DISPC_CONTROL2); } + /* disable LCD3 manager */ + if (da->manager_count > 3) { + v = omap_hwmod_read(oh, DISPC_CONTROL3); + v &= ~LCD_EN_MASK; + omap_hwmod_write(v, oh, DISPC_CONTROL3); + } + i = 0; while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) != irq_mask) { i++; if (i > FRAMEDONE_IRQ_TIMEOUT) { - pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n"); + pr_err("didn't get FRAMEDONE1/2/3 or TV interrupt\n"); break; } mdelay(1); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index be697d4e084357e3c2a4938a60f2caab03605fbb..a9675d8d182254744327415ecf42e45a88fbdcb2 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -315,7 +315,6 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, mmc->slots[0].caps = c->caps; mmc->slots[0].pm_caps = c->pm_caps; mmc->slots[0].internal_clock = !c->ext_clock; - mmc->dma_mask = 0xffffffff; mmc->max_freq = c->max_freq; if (cpu_is_omap44xx()) mmc->reg_offset = OMAP4_MMC_REG_OFFSET; diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 471e62a74a166fb64a7486670a54854239cfb3b6..76f9b3c2f586c577668d7f923f0aabff7bbd53a3 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -127,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 05fdebfaa195b0e5fc87e33217f24ce1b5c09822..330d4c6e746b703819f95ba41d733a88523b555a 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -46,7 +46,7 @@ static void __iomem *wakeupgen_base; static void __iomem *sar_base; static DEFINE_SPINLOCK(wakeupgen_lock); -static unsigned int irq_target_cpu[NR_IRQS]; +static unsigned int irq_target_cpu[MAX_IRQS]; static unsigned int irq_banks = MAX_NR_REG_BANKS; static unsigned int max_irqs = MAX_IRQS; static unsigned int omap_secure_apis; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6ca8e519968d0c4e82e94fb384ab84da90a892b1..37afbd173c2c27969e81f37917d70a767e8fbc2d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1889,6 +1889,7 @@ static int _enable(struct omap_hwmod *oh) _enable_sysc(oh); } } else { + _omap4_disable_module(oh); _disable_clocks(oh); pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", oh->name, r); diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c9e38200216b2985cb3ef997e530891b8e3b19dd..ce7e6068768f3cebbb4bb8e32ea94e4ae6aca3a3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -100,9 +100,9 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = { /* IVA2 (IVA2) */ static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = { - { .name = "logic", .rst_shift = 0 }, - { .name = "seq0", .rst_shift = 1 }, - { .name = "seq1", .rst_shift = 2 }, + { .name = "logic", .rst_shift = 0, .st_shift = 8 }, + { .name = "seq0", .rst_shift = 1, .st_shift = 9 }, + { .name = "seq1", .rst_shift = 2, .st_shift = 10 }, }; static struct omap_hwmod omap3xxx_iva_hwmod = { @@ -112,6 +112,15 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { .rst_lines = omap3xxx_iva_resets, .rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets), .main_clk = "iva2_ck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430_IVA2_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT, + } + }, }; /* timer class */ diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 242aee498ceb21466e33ee04035ed63147e4a615..afb60917a948b64bb3b0ed9b90924facc27fc7f6 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -4210,7 +4210,7 @@ static struct omap_hwmod_ocp_if omap44xx_dsp__iva = { }; /* dsp -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = { .master = &omap44xx_dsp_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "dpll_iva_m5x2_ck", @@ -4828,7 +4828,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { }; /* iva -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = { .master = &omap44xx_iva_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "dpll_iva_m5x2_ck", @@ -5362,7 +5362,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = { }; /* l3_main_2 -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "l3_div_ck", @@ -6032,7 +6032,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_abe__dmic, &omap44xx_l4_abe__dmic_dma, &omap44xx_dsp__iva, - &omap44xx_dsp__sl2if, + /* &omap44xx_dsp__sl2if, */ &omap44xx_l4_cfg__dsp, &omap44xx_l3_main_2__dss, &omap44xx_l4_per__dss, @@ -6068,7 +6068,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__i2c4, &omap44xx_l3_main_2__ipu, &omap44xx_l3_main_2__iss, - &omap44xx_iva__sl2if, + /* &omap44xx_iva__sl2if, */ &omap44xx_l3_main_2__iva, &omap44xx_l4_wkup__kbd, &omap44xx_l4_cfg__mailbox, @@ -6099,7 +6099,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__cm_core, &omap44xx_l4_wkup__prm, &omap44xx_l4_wkup__scrm, - &omap44xx_l3_main_2__sl2if, + /* &omap44xx_l3_main_2__sl2if, */ &omap44xx_l4_abe__slimbus1, &omap44xx_l4_abe__slimbus1_dma, &omap44xx_l4_per__slimbus2, diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba27101b96fae1f387d5b366c5d77181f99b..c95415da23c275b184d2817372a990a371ddaf0c 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -94,7 +94,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c65dbd6a868b6dac07229de3ee3b7791ea..05bd8f02723f2966bfc559ae30b9c33feee9feb3 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -272,21 +272,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +334,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); + pwrdm_post_transition(NULL); + /* PER */ - if (per_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } - - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } } static void omap3_pm_idle(void) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d1b193348a7af9e628cff41956c8684898..91e71d8f46f0aa731c9678e88423490aa1192cf9 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 13d20c8a283dd352515d659ec4c39956228a954a..2ba4f57dda866df44689834370916395ab9a4c3c 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -130,6 +130,7 @@ static struct clock_event_device clockevent_gpt = { .name = "gp_timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .shift = 32, + .rating = 300, .set_next_event = omap2_gp_timer_set_next_event, .set_mode = omap2_gp_timer_set_mode, }; @@ -223,7 +224,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, clockevent_delta2ns(3, &clockevent_gpt); /* Timer internal resynch latency. */ - clockevent_gpt.cpumask = cpumask_of(0); + clockevent_gpt.cpumask = cpu_possible_mask; + clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev); clockevents_register_device(&clockevent_gpt); pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", @@ -258,6 +260,7 @@ static u32 notrace dmtimer_read_sched_clock(void) return 0; } +#ifdef CONFIG_OMAP_32K_TIMER /* Setup free-running counter for clocksource */ static int __init omap2_sync32k_clocksource_init(void) { @@ -297,6 +300,12 @@ static int __init omap2_sync32k_clocksource_init(void) return ret; } +#else +static inline int omap2_sync32k_clocksource_init(void) +{ + return -ENODEV; +} +#endif static void __init omap2_gptimer_clocksource_init(int gptimer_id, const char *fck_source) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index de47f170ba50abf2506c363838d7cd82c70109ee..db5ff664237517562766ffdbc34887c6416c272f 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 9148b229d0de925b4f95fea5154421fa462331ba..a6cd14ab1e4e6f4c27103baf780df091de0cfb93 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, - IRQ_ORION5X_ETH_ERR); + IRQ_ORION5X_ETH_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } @@ -203,6 +204,13 @@ void __init orion5x_wdt_init(void) void __init orion5x_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + + /* + * Some Orion5x devices allocate their coherent buffers from atomic + * context. Increase size of atomic coherent pool to make sure such + * the allocations won't fail. + */ + init_dma_coherent_pool_size(SZ_1M); } int orion5x_tclk; diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index b1b45fff776e614f68ed1058e1313361e03b487b..17da7091d310e4e321b9e104b3ad1b7832ebd9be 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -11,19 +11,16 @@ */ #include #include -#include #include -#include #include #include -#include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31); - - orion_gpio_irq_handler((irq - IRQ_ORION5X_GPIO_0_7) << 3); -} +static int __initdata gpio0_irqs[4] = { + IRQ_ORION5X_GPIO_0_7, + IRQ_ORION5X_GPIO_8_15, + IRQ_ORION5X_GPIO_16_23, + IRQ_ORION5X_GPIO_24_31, +}; void __init orion5x_init_irq(void) { @@ -32,9 +29,6 @@ void __init orion5x_init_irq(void) /* * Initialize gpiolib for GPIOs 0-31. */ - orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START); - irq_set_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler); + orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, 0, + IRQ_ORION5X_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index 0d024b1e916d417a67516101a54a409c36840d38..f224107de7bced279e6c007c54251183f72d8e77 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -132,11 +132,11 @@ static void sirfsoc_clocksource_resume(struct clocksource *cs) { int i; - for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) + for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++) writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); - writel_relaxed(sirfsoc_timer_reg_val[i - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); - writel_relaxed(sirfsoc_timer_reg_val[i - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); + writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); + writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); } static struct clock_event_device sirfsoc_clockevent = { diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 6bb3f47b1f14e7070cfeb5c3dbaff57949adac10..0ca0db787903ab104ef9c0f216148cc3c32acee6 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -456,7 +456,7 @@ static int lubbock_mci_init(struct device *dev, init_timer(&mmc_timer); mmc_timer.data = (unsigned long) data; return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int, - IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data); + 0, "lubbock-sd-detect", data); } static int lubbock_mci_get_ro(struct device *dev) diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 2db697cd2b4ecc9fcb3be872aa0f82cd276b0577..39561dcf65f2668aa585a710fd09cda64c6249e6 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -633,9 +633,8 @@ static struct platform_device bq24022 = { static int magician_mci_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_MAGICIAN_SD, detect_irq, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM, - "mmc card detect", data); + return request_irq(IRQ_MAGICIAN_SD, detect_irq, IRQF_DISABLED, + "mmc card detect", data); } static void magician_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 5905ed130e94200abe59867d0b916e718cedae98..d89d87ae144cc77d2e71e1efe470761544573e3d 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { static struct eeti_ts_platform_data eeti_ts_pdata = { .irq_active_high = 1, + .irq_gpio = GPIO_TOUCH_IRQ, }; static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), .platform_data = &eeti_ts_pdata, }; diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 2b6ac00b2cd98ce24e3e5e34bf56d36698d54c87..166dd32cc1d359e9c8299ea7a07146438d944020 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -332,8 +332,8 @@ static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, int err; err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM, - "MMC card detect", data); + IRQF_DISABLED | IRQF_TRIGGER_RISING, + "MMC card detect", data); if (err) { printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request" "MMC card detect IRQ\n"); diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index e24961109b70286655c36c46a3083809511870c5..d56b0f7f2b202a0aaea0b36435328ff15b8c783f 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02 select I2C select POWER_SUPPLY select MACH_NEO1973 - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_USB_HOST help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone @@ -493,7 +493,7 @@ config MACH_RX1950 select S3C24XX_DCLK select PM_H1940 if PM select I2C - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_NAND select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C2440_XTAL_16934400 diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 454831b66037f9c64d37521bf14e118dcc92bc9a..ee99fd56c0439f5bdc22152fa2c530282424fd70 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c index 6a2352436e6268989700ab9d9b84761add3b9bc1..f8e47235babeab49c179328d9013d62503286eee 100644 --- a/arch/arm/mach-sa1100/leds-hackkit.c +++ b/arch/arm/mach-sa1100/leds-hackkit.c @@ -10,6 +10,7 @@ * as cpu led, the green one is used as timer led. */ #include +#include #include #include diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index cf10f92856dcbb905712024b1d6a00e55c77cf51..453a6e50db8be95f5fdb8574672fa00aa1671ecb 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -520,13 +520,14 @@ static struct platform_device hdmi_lcdc_device = { }; /* GPIO KEY */ -#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } +#define GPIO_KEY(c, g, d, ...) \ + { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"), - GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"), - GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"), - GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"), + GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1), + GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"), + GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"), + GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"), }; static struct gpio_keys_platform_data gpio_key_info = { @@ -901,8 +902,8 @@ static struct platform_device *eva_devices[] __initdata = { &camera_device, &ceu0_device, &fsi_device, - &fsi_hdmi_device, &fsi_wm8978_device, + &fsi_hdmi_device, }; static void __init eva_clock_init(void) diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 53b7ea92c32c119bcfc6d44a96b92fac915363da..3b8a0171c3cb3e30aa7242afcdc65f13cd5c11de 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -346,11 +346,11 @@ static struct resource sh_mmcif_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(141), + .start = gic_spi(140), .flags = IORESOURCE_IRQ, }, [2] = { - .start = gic_spi(140), + .start = gic_spi(141), .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7ea2b31e31991355cb9304dfcafcc4ab6db6f628..c129542f6aedf1ee69f99f463eb554d31d13ed2d 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = { * - J30 "open" * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET * - add .get_vbus = usbhs_get_vbus in usbhs1_private + * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices. */ #define IRQ8 evt2irq(0x0300) #define USB_PHY_MODE (1 << 4) @@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usbhs1_device, &usbhs0_device, + &usbhs1_device, &leds_device, &fsi_device, &fsi_ak4643_device, diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 3a528cf4366cb6addff63fb9e7032948f71f49e2..fcf5a47f47724ccd2be52005adcef685487671a8 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = { static struct platform_device eth_device = { .name = "smsc911x", - .id = 0, + .id = -1, .dev = { .platform_data = &smsc911x_platdata, }, diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index ee447404c857ed5794eaf5cbe1153a9e2e2d5505..588555a67d9c438ffb4d0ea0908923056554f635 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on) return 0; /* always allow wakeup */ } -#define RELOC_BASE 0x1000 +#define RELOC_BASE 0x1200 -/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */ +/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */ #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE) INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index 0f882ecb7d810f4a98700fa6f46c913eec0860c9..6ec300549960196d83ab1542e8715c200f83e50b 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -120,182 +120,156 @@ struct pl08x_channel_data spear300_dma_info[] = { .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, }; diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index bbcf4571d361caefd90c2f685365a5a394fb56c5..1d0e435b904525e1d2070bfbc6f68e3ba91eea83 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -205,182 +205,156 @@ struct pl08x_channel_data spear310_dma_info[] = { .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart2_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart2_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart3_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart3_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart4_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart4_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart5_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart5_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, }; diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 88d483bcd66a37665dc130bd5f0da016192a950a..fd823c624575f12991e99eafdaeb2a3a6e8a4e11 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -213,182 +213,156 @@ struct pl08x_channel_data spear320_dma_info[] = { .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c0_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c0_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp1_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp1_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp2_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp2_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart1_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart1_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart2_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart2_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c1_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c1_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c2_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c2_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2s_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2s_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "rs485_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "rs485_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, }; diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 66db5f13af844360b1b5845d1b06c13a6d51445a..98144baf88838243d8a45c5bded0f606bd7d99d7 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -46,7 +46,8 @@ struct pl022_ssp_controller pl022_plat_data = { struct pl08x_platform_data pl080_plat_data = { .memcpy_channel = { .bus_id = "memcpy", - .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + .cctl_memcpy = + (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 9af67d003c62ce6f167307020fcd2f52fa181e8a..5a5a52db252bf79d6d776c4a2cbdbbf330ba9e43 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -36,336 +36,288 @@ static struct pl08x_channel_data spear600_dma_info[] = { .min_signal = 0, .max_signal = 0, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp1_tx", .min_signal = 1, .max_signal = 1, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_rx", .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_rx", .min_signal = 4, .max_signal = 4, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_tx", .min_signal = 5, .max_signal = 5, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp2_rx", .min_signal = 6, .max_signal = 6, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp2_tx", .min_signal = 7, .max_signal = 7, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ext0_rx", .min_signal = 0, .max_signal = 0, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext0_tx", .min_signal = 1, .max_signal = 1, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext1_rx", .min_signal = 2, .max_signal = 2, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext1_tx", .min_signal = 3, .max_signal = 3, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext2_rx", .min_signal = 4, .max_signal = 4, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext2_tx", .min_signal = 5, .max_signal = 5, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext3_rx", .min_signal = 6, .max_signal = 6, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext3_tx", .min_signal = 7, .max_signal = 7, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext4_rx", .min_signal = 8, .max_signal = 8, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext4_tx", .min_signal = 9, .max_signal = 9, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext5_rx", .min_signal = 10, .max_signal = 10, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext5_tx", .min_signal = 11, .max_signal = 11, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext6_rx", .min_signal = 12, .max_signal = 12, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext6_tx", .min_signal = 13, .max_signal = 13, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext7_rx", .min_signal = 14, .max_signal = 14, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext7_tx", .min_signal = 15, .max_signal = 15, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, }; @@ -373,7 +325,8 @@ static struct pl08x_channel_data spear600_dma_info[] = { struct pl08x_platform_data pl080_plat_data = { .memcpy_channel = { .bus_id = "memcpy", - .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + .cctl_memcpy = + (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 8fd387bf31f0c66a27b313d3b5edc8bd976e3d0a..b7344beec102b109d4d013b4db47a1ab56d90e42 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -51,7 +51,7 @@ static struct regulator_init_data ldo0_data = { .consumer_supplies = tps658621_ldo0_supply, }; -#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv) \ +#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\ static struct regulator_init_data _id##_data = { \ .supply_regulator = _supply, \ .constraints = { \ @@ -63,21 +63,22 @@ static struct regulator_init_data ldo0_data = { .valid_ops_mask = (REGULATOR_CHANGE_MODE | \ REGULATOR_CHANGE_STATUS | \ REGULATOR_CHANGE_VOLTAGE), \ + .always_on = _on, \ }, \ } -HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550); -HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475); -HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300); +HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1); +HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1); +HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0); +HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1); +HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1); #define TPS_REG(_id, _data) \ { \ @@ -119,9 +120,10 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { + regulator_register_always_on(0, "vdd_sys", + NULL, 0, 5000000); + if (machine_is_harmony()) { - regulator_register_always_on(0, "vdd_sys", - NULL, 0, 5000000); i2c_register_board_info(3, harmony_regulators, 1); } else { /* Harmony, booted using device tree */ struct device_node *np; diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c013bbf79cac0d0eff64edfd5221d7815bb04879..53d3d46dec1290b4265a3c3c26d7ffc0449f223e 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -41,7 +41,6 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 - select LEDS_GPIO help Include support for the snowball development platform. diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index 996048038743f777e114ff6a48bc2bb682271a46..df15646036aacd9bec713b7beebb926dafa707fa 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, return pdev; } -/* Platform device for ASoC U8500 machine */ -static struct platform_device snd_soc_u8500 = { - .name = "snd-soc-u8500", +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", .id = 0, .dev = { .platform_data = NULL, @@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent) { struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_u8500); + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8674a890fd1c7071ae2efce55a3a7c888a97c091..a534d8880de12e2a92b0c7a35ec1ebdc3034c44e 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -797,6 +797,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -804,6 +805,8 @@ static void __init u8500_init_machine(void) mop500_uib_init(); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + mop500_msp_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -815,6 +818,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 119bc52ab93ed7675d4528a779e97270d308c70e..4e07eec1270dd3b3fa51860fbc735a5d1fb9e18b 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -63,10 +63,11 @@ static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd, pid = task_pid_nr(thread->task) << ASID_BITS; asm volatile( " mrc p15, 0, %0, c13, c0, 1\n" - " bfi %1, %0, #0, %2\n" - " mcr p15, 0, %1, c13, c0, 1\n" + " and %0, %0, %2\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c13, c0, 1\n" : "=r" (contextidr), "+r" (pid) - : "I" (ASID_BITS)); + : "I" (~ASID_MASK)); isb(); return NOTIFY_OK; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c2cdf6500f75dc5a1ab5a688ea305099e8d30057..13f555d62491e59fbae0127f89e3f2b2395d3abf 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -267,17 +267,19 @@ static void __dma_free_remap(void *cpu_addr, size_t size) vunmap(cpu_addr); } +#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K + struct dma_pool { size_t size; spinlock_t lock; unsigned long *bitmap; unsigned long nr_pages; void *vaddr; - struct page *page; + struct page **pages; }; static struct dma_pool atomic_pool = { - .size = SZ_256K, + .size = DEFAULT_DMA_COHERENT_POOL_SIZE, }; static int __init early_coherent_pool(char *p) @@ -287,6 +289,21 @@ static int __init early_coherent_pool(char *p) } early_param("coherent_pool", early_coherent_pool); +void __init init_dma_coherent_pool_size(unsigned long size) +{ + /* + * Catch any attempt to set the pool size too late. + */ + BUG_ON(atomic_pool.vaddr); + + /* + * Set architecture specific coherent pool size only if + * it has not been changed by kernel command line parameter. + */ + if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE) + atomic_pool.size = size; +} + /* * Initialise the coherent pool for atomic allocations. */ @@ -297,6 +314,7 @@ static int __init atomic_pool_init(void) unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; struct page *page; + struct page **pages; void *ptr; int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long); @@ -304,21 +322,33 @@ static int __init atomic_pool_init(void) if (!bitmap) goto no_bitmap; + pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); + if (!pages) + goto no_pages; + if (IS_ENABLED(CONFIG_CMA)) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page); else ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, &page, NULL); if (ptr) { + int i; + + for (i = 0; i < nr_pages; i++) + pages[i] = page + i; + spin_lock_init(&pool->lock); pool->vaddr = ptr; - pool->page = page; + pool->pages = pages; pool->bitmap = bitmap; pool->nr_pages = nr_pages; pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n", (unsigned)pool->size / 1024); return 0; } + + kfree(pages); +no_pages: kfree(bitmap); no_bitmap: pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n", @@ -358,7 +388,7 @@ void __init dma_contiguous_remap(void) if (end > arm_lowmem_limit) end = arm_lowmem_limit; if (start >= end) - return; + continue; map.pfn = __phys_to_pfn(start); map.virtual = __phys_to_virt(start); @@ -423,7 +453,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) unsigned int pageno; unsigned long flags; void *ptr = NULL; - size_t align; + unsigned long align_mask; if (!pool->vaddr) { WARN(1, "coherent pool not initialised!\n"); @@ -435,35 +465,53 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) * small, so align them to their order in pages, minimum is a page * size. This helps reduce fragmentation of the DMA space. */ - align = PAGE_SIZE << get_order(size); + align_mask = (1 << get_order(size)) - 1; spin_lock_irqsave(&pool->lock, flags); pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages, - 0, count, (1 << align) - 1); + 0, count, align_mask); if (pageno < pool->nr_pages) { bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; - *ret_page = pool->page + pageno; + *ret_page = pool->pages[pageno]; + } else { + pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n" + "Please increase it with coherent_pool= kernel parameter!\n", + (unsigned)pool->size / 1024); } spin_unlock_irqrestore(&pool->lock, flags); return ptr; } +static bool __in_atomic_pool(void *start, size_t size) +{ + struct dma_pool *pool = &atomic_pool; + void *end = start + size; + void *pool_start = pool->vaddr; + void *pool_end = pool->vaddr + pool->size; + + if (start < pool_start || start >= pool_end) + return false; + + if (end <= pool_end) + return true; + + WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n", + start, end - 1, pool_start, pool_end - 1); + + return false; +} + static int __free_from_pool(void *start, size_t size) { struct dma_pool *pool = &atomic_pool; unsigned long pageno, count; unsigned long flags; - if (start < pool->vaddr || start > pool->vaddr + pool->size) + if (!__in_atomic_pool(start, size)) return 0; - if (start + size > pool->vaddr + pool->size) { - WARN(1, "freeing wrong coherent size from pool\n"); - return 0; - } - pageno = (start - pool->vaddr) >> PAGE_SHIFT; count = size >> PAGE_SHIFT; @@ -648,12 +696,12 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, if (arch_is_coherent() || nommu()) { __dma_free_buffer(page, size); + } else if (__free_from_pool(cpu_addr, size)) { + return; } else if (!IS_ENABLED(CONFIG_CMA)) { __dma_free_remap(cpu_addr, size); __dma_free_buffer(page, size); } else { - if (__free_from_pool(cpu_addr, size)) - return; /* * Non-atomic allocations cannot be freed with IRQs disabled */ @@ -1090,10 +1138,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si return 0; } +static struct page **__atomic_get_pages(void *addr) +{ + struct dma_pool *pool = &atomic_pool; + struct page **pages = pool->pages; + int offs = (addr - pool->vaddr) >> PAGE_SHIFT; + + return pages + offs; +} + static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) { struct vm_struct *area; + if (__in_atomic_pool(cpu_addr, PAGE_SIZE)) + return __atomic_get_pages(cpu_addr); + if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) return cpu_addr; @@ -1103,6 +1163,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) return NULL; } +static void *__iommu_alloc_atomic(struct device *dev, size_t size, + dma_addr_t *handle) +{ + struct page *page; + void *addr; + + addr = __alloc_from_pool(size, &page); + if (!addr) + return NULL; + + *handle = __iommu_create_mapping(dev, &page, size); + if (*handle == DMA_ERROR_CODE) + goto err_mapping; + + return addr; + +err_mapping: + __free_from_pool(addr, size); + return NULL; +} + +static void __iommu_free_atomic(struct device *dev, struct page **pages, + dma_addr_t handle, size_t size) +{ + __iommu_remove_mapping(dev, handle, size); + __free_from_pool(page_address(pages[0]), size); +} + static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs) { @@ -1113,6 +1201,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); + if (gfp & GFP_ATOMIC) + return __iommu_alloc_atomic(dev, size, handle); + pages = __iommu_alloc_buffer(dev, size, gfp); if (!pages) return NULL; @@ -1179,6 +1270,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, return; } + if (__in_atomic_pool(cpu_addr, size)) { + __iommu_free_atomic(dev, pages, handle, size); + return; + } + if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) { unmap_kernel_range((unsigned long)cpu_addr, size); vunmap(cpu_addr); diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 77458548e031fe73d75a5a79ea36f923c95cc88a..40ca11ed6e5fbae9c54914db0123bf136e788481 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval) struct page *page; struct address_space *mapping; - if (!pte_present_user(pteval)) - return; if (cache_is_vipt_nonaliasing() && !pte_exec(pteval)) /* only flush non-aliasing VIPT caches for exec mappings */ return; diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 6776160618ef0ede79d07b4f6a0873c30df2a1d0..a8ee92da3544926138f68116fbddbc2c55b64dbf 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page /* permanent static mappings from iotable_init() */ #define VM_ARM_STATIC_MAPPING 0x40000000 +/* empty mapping */ +#define VM_ARM_EMPTY_MAPPING 0x20000000 + /* mapping type (attributes) for permanent static mappings */ #define VM_ARM_MTYPE(mt) ((mt) << 20) #define VM_ARM_MTYPE_MASK (0x1f << 20) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4c2d0451e84af1c2a0347a6fe462dd2e3306db3e..c2fa21d0103e0348f2b1f48c886aa11d63809dad 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -807,7 +807,7 @@ static void __init pmd_empty_section_gap(unsigned long addr) vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); vm->addr = (void *)addr; vm->size = SECTION_SIZE; - vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING; vm->caller = pmd_empty_section_gap; vm_area_add_early(vm); } @@ -820,7 +820,7 @@ static void __init fill_pmd_gaps(void) /* we're still single threaded hence no lock needed here */ for (vm = vmlist; vm; vm = vm->next) { - if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING))) continue; addr = (unsigned long)vm->addr; if (addr < next) @@ -961,8 +961,8 @@ void __init sanity_check_meminfo(void) * Check whether this memory bank would partially overlap * the vmalloc area. */ - if (__va(bank->start + bank->size) > vmalloc_min || - __va(bank->start + bank->size) < __va(bank->start)) { + if (__va(bank->start + bank->size - 1) >= vmalloc_min || + __va(bank->start + bank->size - 1) <= __va(bank->start)) { unsigned long newsize = vmalloc_min - __va(bank->start); printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " "to -%.8llx (vmalloc region overlap).\n", diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index 845f461f8ec16847e69414f5c966a9ca4f961db6..ea94765acf9a3650f5cb850f6990893f3ccb459b 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -39,10 +39,18 @@ ENTRY(v7wbi_flush_user_tlb_range) mov r0, r0, lsr #PAGE_SHIFT @ align address mov r1, r1, lsr #PAGE_SHIFT asid r3, r3 @ mask ASID +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(W(mov) r3, #0 ) + ALT_UP(W(nop) ) +#endif orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT 1: +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(mcr p15, 0, r0, c8, c3, 3) @ TLB invalidate U MVA all ASID (shareable) +#else ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable) +#endif ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA add r0, r0, #PAGE_SZ @@ -67,7 +75,11 @@ ENTRY(v7wbi_flush_kern_tlb_range) mov r0, r0, lsl #PAGE_SHIFT mov r1, r1, lsl #PAGE_SHIFT 1: +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(mcr p15, 0, r0, c8, c3, 3) @ TLB invalidate U MVA all ASID (shareable) +#else ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable) +#endif ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA add r0, r0, #PAGE_SZ cmp r0, r1 diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig index cb3e3eef55c0b6dec152d8f0ea75212c6c6754fc..6b46cee2f9cd45ec5d6536ef9cfe5611a5962850 100644 --- a/arch/arm/plat-mxc/devices/Kconfig +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -15,7 +15,11 @@ config IMX_HAVE_PLATFORM_GPIO_KEYS config IMX_HAVE_PLATFORM_IMX21_HCD bool - + +config IMX_HAVE_PLATFORM_IMX27_CODA + bool + default y if SOC_IMX27 + config IMX_HAVE_PLATFORM_IMX2_WDT bool diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index c11ac8472bebae264374f13db3bdb8fdf3337c6e..76f3195475d06abd27a9114cf3c64301a2ebdf52 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o obj-y += platform-gpio-mxc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o obj-y += platform-imx-dma.o diff --git a/arch/arm/plat-mxc/devices/platform-imx27-coda.c b/arch/arm/plat-mxc/devices/platform-imx27-coda.c new file mode 100644 index 0000000000000000000000000000000000000000..8b12aacdf3965020d06e936c2ee6c11581caee55 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx27-coda.c @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Vista Silicon + * Javier Martin + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include +#include + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx27_coda_data imx27_coda_data __initconst = { + .iobase = MX27_VPU_BASE_ADDR, + .iosize = SZ_512, + .irq = MX27_INT_VPU, +}; +#endif + +struct platform_device *__init imx_add_imx27_coda( + const struct imx_imx27_coda_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("coda-imx27", 0, res, 2, NULL, + 0, DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index a7f5bb1084d72da97843fb73468cdd1c8f4a70fd..762780cad1bd1fc3375b3b7219c970180de1a556 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -83,6 +83,14 @@ struct platform_device *__init imx_add_imx21_hcd( const struct imx_imx21_hcd_data *data, const struct mx21_usbh_platform_data *pdata); +struct imx_imx27_coda_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx27_coda( + const struct imx_imx27_coda_data *data); + struct imx_imx2_wdt_data { int id; resource_size_t iobase; diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 627d94f1b010d32d09091bf4f025fabb617bde03..ec466400a2002943de0ccaf840f25266db6149e0 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -98,6 +98,7 @@ #define MX25_INT_UART1 (NR_IRQS_LEGACY + 45) #define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51) #define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX25_INT_GPT1 (NR_IRQS_LEGACY + 54) #define MX25_INT_FEC (NR_IRQS_LEGACY + 57) #define MX25_DMA_REQ_SSI2_RX1 22 diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index c2193178210bdd47dbd04b904cdba45a82fd1ad9..3ed1adbc09f882bbafc0fe35fee22467a96734f8 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -23,6 +23,7 @@ #include #include +#include #include "irq-common.h" diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 626ad8cad7a9486d71408f611b4f99b46c85b995..938b50a33439b092202de715e81267b18b5f73cb 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer->reserved = 1; break; } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer request failed!\n", __func__); @@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) break; } } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer%d request failed!\n", __func__, id); @@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 68b180edcfffd0e05c9256aaa153993500177f84..bb5d08a70dbc64ac961945669655e2c47d380750 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx()) + cpu_is_omap44xx() || soc_is_omap54xx() || \ + soc_is_am33xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 5493bd95da5ee9f6988bb386a84151511a30b931..eb3e4d555343bb921e71f0598ca53a37fe1a26f1 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -81,8 +81,6 @@ struct omap_mmc_platform_data { /* Return context loss count due to PM states changing */ int (*get_context_loss_count)(struct device *dev); - u64 dma_mask; - /* Integrating attributes from the omap_hwmod layer */ u8 controller_flags; diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 045e320f1067408abc1ef08e6a3667fe911c63f7..324d31b14852e632d614635e40af358d24a36aab 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -108,4 +108,13 @@ # endif #endif +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index b8d19a136781e4ba89382cc151ba6fe0190ccbc3..7f7b112acccb897b90066a6b8357a943284c3a14 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -110,7 +110,7 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ AM33XXUART##p) -static inline void __arch_decomp_setup(unsigned long arch_id) +static inline void arch_decomp_setup(void) { int port = 0; @@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } while (0); } -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - /* * nothing to do */ diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 766181cb5c95c277b8495966835571059a36dda5..024f3b08db29b0046a58457120259e7b5366a1ca 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -68,6 +68,7 @@ static unsigned long omap_sram_start; static void __iomem *omap_sram_base; +static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; @@ -106,6 +107,7 @@ static int is_sram_locked(void) */ static void __init omap_detect_sram(void) { + omap_sram_skip = SRAM_BOOTLOADER_SZ; if (cpu_class_is_omap2()) { if (is_sram_locked()) { if (cpu_is_omap34xx()) { @@ -113,6 +115,7 @@ static void __init omap_detect_sram(void) if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; } else { omap_sram_size = 0x8000; /* 32K */ } @@ -175,8 +178,10 @@ static void __init omap_map_sram(void) return; #ifdef CONFIG_OMAP4_ERRATA_I688 + if (cpu_is_omap44xx()) { omap_sram_start += PAGE_SIZE; omap_sram_size -= SZ_16K; + } #endif if (cpu_is_omap34xx()) { /* @@ -203,8 +208,8 @@ static void __init omap_map_sram(void) * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... */ - memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0, - omap_sram_size - SRAM_BOOTLOADER_SZ); + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); } /* @@ -218,7 +223,7 @@ void *omap_sram_push_address(unsigned long size) { unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; - available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ); + available = omap_sram_ceil - (omap_sram_base + omap_sram_skip); if (size > available) { pr_err("Not enough space in SRAM\n"); diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index c1793786aea989de24668d31529f1d22eb1e7012..b8b747a9d360110e9ca24b505f5249a730209e3e 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -47,6 +47,7 @@ void __init orion_clkdev_init(struct clk *tclk) orion_clkdev_add(NULL, MV643XX_ETH_NAME ".2", tclk); orion_clkdev_add(NULL, MV643XX_ETH_NAME ".3", tclk); orion_clkdev_add(NULL, "orion_wdt", tclk); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", tclk); } /* Fill in the resources structure and link it into the platform @@ -290,10 +291,12 @@ static struct platform_device orion_ge00 = { void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, eth_data, &orion_ge00); @@ -342,10 +345,12 @@ static struct platform_device orion_ge01 = { void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, eth_data, &orion_ge01); diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index af95af2573010caccaa393dff87ebdc5a4529b33..dfda74fae6f25156556f505954189ec9d7d5bd9f 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -8,15 +8,22 @@ * warranty of any kind, whether express or implied. */ +#define DEBUG + #include #include #include +#include #include #include #include #include #include #include +#include +#include +#include +#include /* * GPIO unit register offsets. @@ -38,6 +45,7 @@ struct orion_gpio_chip { unsigned long valid_output; int mask_offset; int secondary_irq_base; + struct irq_domain *domain; }; static void __iomem *GPIO_OUT(struct orion_gpio_chip *ochip) @@ -222,10 +230,10 @@ static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin) struct orion_gpio_chip *ochip = container_of(chip, struct orion_gpio_chip, chip); - return ochip->secondary_irq_base + pin; + return irq_create_mapping(ochip->domain, + ochip->secondary_irq_base + pin); } - /* * Orion-specific GPIO API extensions. */ @@ -353,12 +361,10 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type) int pin; u32 u; - pin = d->irq - gc->irq_base; + pin = d->hwirq - ochip->secondary_irq_base; u = readl(GPIO_IO_CONF(ochip)) & (1 << pin); if (!u) { - printk(KERN_ERR "orion gpio_irq_set_type failed " - "(irq %d, pin %d).\n", d->irq, pin); return -EINVAL; } @@ -397,17 +403,53 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type) u &= ~(1 << pin); /* rising */ writel(u, GPIO_IN_POL(ochip)); } - return 0; } -void __init orion_gpio_init(int gpio_base, int ngpio, - u32 base, int mask_offset, int secondary_irq_base) +static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) +{ + struct orion_gpio_chip *ochip = irq_get_handler_data(irq); + u32 cause, type; + int i; + + if (ochip == NULL) + return; + + cause = readl(GPIO_DATA_IN(ochip)) & readl(GPIO_LEVEL_MASK(ochip)); + cause |= readl(GPIO_EDGE_CAUSE(ochip)) & readl(GPIO_EDGE_MASK(ochip)); + + for (i = 0; i < ochip->chip.ngpio; i++) { + int irq; + + irq = ochip->secondary_irq_base + i; + + if (!(cause & (1 << i))) + continue; + + type = irqd_get_trigger_type(irq_get_irq_data(irq)); + if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { + /* Swap polarity (race with GPIO line) */ + u32 polarity; + + polarity = readl(GPIO_IN_POL(ochip)); + polarity ^= 1 << i; + writel(polarity, GPIO_IN_POL(ochip)); + } + generic_handle_irq(irq); + } +} + +void __init orion_gpio_init(struct device_node *np, + int gpio_base, int ngpio, + void __iomem *base, int mask_offset, + int secondary_irq_base, + int irqs[4]) { struct orion_gpio_chip *ochip; struct irq_chip_generic *gc; struct irq_chip_type *ct; char gc_label[16]; + int i; if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips)) return; @@ -426,6 +468,10 @@ void __init orion_gpio_init(int gpio_base, int ngpio, ochip->chip.base = gpio_base; ochip->chip.ngpio = ngpio; ochip->chip.can_sleep = 0; +#ifdef CONFIG_OF + ochip->chip.of_node = np; +#endif + spin_lock_init(&ochip->lock); ochip->base = (void __iomem *)base; ochip->valid_input = 0; @@ -435,8 +481,6 @@ void __init orion_gpio_init(int gpio_base, int ngpio, gpiochip_add(&ochip->chip); - orion_gpio_chip_count++; - /* * Mask and clear GPIO interrupts. */ @@ -444,16 +488,28 @@ void __init orion_gpio_init(int gpio_base, int ngpio, writel(0, GPIO_EDGE_MASK(ochip)); writel(0, GPIO_LEVEL_MASK(ochip)); - gc = irq_alloc_generic_chip("orion_gpio_irq", 2, secondary_irq_base, + /* Setup the interrupt handlers. Each chip can have up to 4 + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. */ + + for (i = 0; i < 4; i++) { + if (irqs[i]) { + irq_set_handler_data(irqs[i], ochip); + irq_set_chained_handler(irqs[i], gpio_irq_handler); + } + } + + gc = irq_alloc_generic_chip("orion_gpio_irq", 2, + secondary_irq_base, ochip->base, handle_level_irq); gc->private = ochip; - ct = gc->chip_types; ct->regs.mask = ochip->mask_offset + GPIO_LEVEL_MASK_OFF; ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = gpio_irq_set_type; + ct->chip.name = ochip->chip.label; ct++; ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF; @@ -464,41 +520,69 @@ void __init orion_gpio_init(int gpio_base, int ngpio, ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = gpio_irq_set_type; ct->handler = handle_edge_irq; + ct->chip.name = ochip->chip.label; irq_setup_generic_chip(gc, IRQ_MSK(ngpio), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); -} -void orion_gpio_irq_handler(int pinoff) -{ - struct orion_gpio_chip *ochip; - u32 cause, type; - int i; - - ochip = orion_gpio_chip_find(pinoff); - if (ochip == NULL) - return; - - cause = readl(GPIO_DATA_IN(ochip)) & readl(GPIO_LEVEL_MASK(ochip)); - cause |= readl(GPIO_EDGE_CAUSE(ochip)) & readl(GPIO_EDGE_MASK(ochip)); - - for (i = 0; i < ochip->chip.ngpio; i++) { - int irq; + /* Setup irq domain on top of the generic chip. */ + ochip->domain = irq_domain_add_legacy(np, + ochip->chip.ngpio, + ochip->secondary_irq_base, + ochip->secondary_irq_base, + &irq_domain_simple_ops, + ochip); + if (!ochip->domain) + panic("%s: couldn't allocate irq domain (DT).\n", + ochip->chip.label); - irq = ochip->secondary_irq_base + i; + orion_gpio_chip_count++; +} - if (!(cause & (1 << i))) - continue; +#ifdef CONFIG_OF +static void __init orion_gpio_of_init_one(struct device_node *np, + int irq_gpio_base) +{ + int ngpio, gpio_base, mask_offset; + void __iomem *base; + int ret, i; + int irqs[4]; + int secondary_irq_base; + + ret = of_property_read_u32(np, "ngpio", &ngpio); + if (ret) + goto out; + ret = of_property_read_u32(np, "mask-offset", &mask_offset); + if (ret == -EINVAL) + mask_offset = 0; + else + goto out; + base = of_iomap(np, 0); + if (!base) + goto out; + + secondary_irq_base = irq_gpio_base + (32 * orion_gpio_chip_count); + gpio_base = 32 * orion_gpio_chip_count; + + /* Get the interrupt numbers. Each chip can have up to 4 + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. */ + + for (i = 0; i < 4; i++) + irqs[i] = irq_of_parse_and_map(np, i); + + orion_gpio_init(np, gpio_base, ngpio, base, mask_offset, + secondary_irq_base, irqs); + return; +out: + pr_err("%s: %s: missing mandatory property\n", __func__, np->name); +} - type = irqd_get_trigger_type(irq_get_irq_data(irq)); - if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { - /* Swap polarity (race with GPIO line) */ - u32 polarity; +void __init orion_gpio_of_init(int irq_gpio_base) +{ + struct device_node *np; - polarity = readl(GPIO_IN_POL(ochip)); - polarity ^= 1 << i; - writel(polarity, GPIO_IN_POL(ochip)); - } - generic_handle_irq(irq); - } + for_each_compatible_node(np, NULL, "marvell,orion-gpio") + orion_gpio_of_init_one(np, irq_gpio_base); } +#endif diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e00fdb2136090154ea930c9f224365677644444e..ae2377ef63e5d9c455e07a4c8db7590f8935d4dc 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase, void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index bec0c98ce41f859ef4a5a47542b239704ae2e513..81c6fc8a7b288f112c6fcc9d7d915f834437d9ac 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -13,7 +13,7 @@ #include #include - +#include /* * Orion-specific GPIO API extensions. */ @@ -27,13 +27,11 @@ int orion_gpio_led_blink_set(unsigned gpio, int state, void orion_gpio_set_valid(unsigned pin, int mode); /* Initialize gpiolib. */ -void __init orion_gpio_init(int gpio_base, int ngpio, - u32 base, int mask_offset, int secondary_irq_base); - -/* - * GPIO interrupt handling. - */ -void orion_gpio_irq_handler(int irqoff); - +void __init orion_gpio_init(struct device_node *np, + int gpio_base, int ngpio, + void __iomem *base, int mask_offset, + int secondary_irq_base, + int irq[4]); +void __init orion_gpio_of_init(int irq_gpio_base); #endif diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h index f05eeab949688b823c3416f66fbb404b1b5ea978..50547e41793601042a4342aebec12186163d9e00 100644 --- a/arch/arm/plat-orion/include/plat/irq.h +++ b/arch/arm/plat-orion/include/plat/irq.h @@ -12,6 +12,5 @@ #define __PLAT_IRQ_H void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); - - +void __init orion_dt_init_irq(void); #endif diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 2d5b9c1ef3897778181d66b84b1a3281b6df24e2..d751964def4c62c5f8592af265d333023fd57056 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -11,8 +11,12 @@ #include #include #include +#include #include +#include +#include #include +#include void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) { @@ -32,3 +36,39 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); } + +#ifdef CONFIG_OF +static int __init orion_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + int i = 0, irq_gpio; + void __iomem *base; + + do { + base = of_iomap(np, i); + if (base) { + orion_irq_init(i * 32, base); + i++; + } + } while (base); + + irq_domain_add_legacy(np, i * 32, 0, 0, + &irq_domain_simple_ops, NULL); + + irq_gpio = i * 32; + orion_gpio_of_init(irq_gpio); + + return 0; +} + +static const struct of_device_id orion_irq_match[] = { + { .compatible = "marvell,orion-intc", + .data = orion_add_irq_domain, }, + {}, +}; + +void __init orion_dt_init_irq(void) +{ + of_irq_init(orion_irq_match); +} +#endif diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 28f898f75380a8ff39036805afdc5b5d40803df8..db98e7021f0daf7507fe55f91f1e73ef761a6dc3 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) * when necessary. */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 7aca31c1df1fe57ac91b4278b13ad8036a8dac93..9c3b90c3538e3b71bb1e71c8c8bf817ca5057a89 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -403,7 +403,8 @@ config S5P_DEV_USB_EHCI config S3C24XX_PWM bool "PWM device support" - select HAVE_PWM + select PWM + select PWM_SAMSUNG help Support for exporting the PWM timer blocks via the pwm device system diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 65c5eca475e76ef839a16aaef568173a2dc0ee1c..d1116e2dfbeaf57ccd0c2a1aff9ce413d9b57f2a 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -144,6 +144,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) int clk_set_rate(struct clk *clk, unsigned long rate) { + unsigned long flags; int ret; if (IS_ERR(clk)) @@ -159,9 +160,9 @@ int clk_set_rate(struct clk *clk, unsigned long rate) if (clk->ops == NULL || clk->ops->set_rate == NULL) return -EINVAL; - spin_lock(&clocks_lock); + spin_lock_irqsave(&clocks_lock, flags); ret = (clk->ops->set_rate)(clk, rate); - spin_unlock(&clocks_lock); + spin_unlock_irqrestore(&clocks_lock, flags); return ret; } @@ -173,17 +174,18 @@ struct clk *clk_get_parent(struct clk *clk) int clk_set_parent(struct clk *clk, struct clk *parent) { + unsigned long flags; int ret = 0; if (IS_ERR(clk)) return -EINVAL; - spin_lock(&clocks_lock); + spin_lock_irqsave(&clocks_lock, flags); if (clk->ops && clk->ops->set_parent) ret = (clk->ops->set_parent)(clk, parent); - spin_unlock(&clocks_lock); + spin_unlock_irqrestore(&clocks_lock, flags); return ret; } diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74e31ce355388bd7c2062b35fb30e09ca085b3f5..fc49f3dabd7653624b7f9ccc8e78ef12b102d527 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,8 @@ #include #include +#include + #include #include #include @@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210()) + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) pd->bus_num = 8; else if (soc_is_s5pv210()) pd->bus_num = 3; @@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s5p_device_i2c_hdmiphy); } + +struct s5p_hdmi_platform_data s5p_hdmi_def_platdata; + +void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus) +{ + struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; + + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) + pd->hdmiphy_bus = 8; + else if (soc_is_s5pv210()) + pd->hdmiphy_bus = 3; + else + pd->hdmiphy_bus = 0; + + pd->hdmiphy_info = hdmiphy_info; + pd->mhl_info = mhl_info; + pd->mhl_bus = mhl_bus; + + s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data), + &s5p_device_hdmi); +} + #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ /* I2S */ diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h new file mode 100644 index 0000000000000000000000000000000000000000..331d046ac2c57424269f870909aafbfa21b2f9cc --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/hdmi.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_HDMI_H +#define __PLAT_SAMSUNG_HDMI_H __FILE__ + +extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus); + +#endif /* __PLAT_SAMSUNG_HDMI_H */ diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 64ab65f0fdbc652cd1e0f165ec13bf5a61cc6377..15070284343ee43070c7130d3f8ce6bff6a0b4ff 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h index 2bc6b54460a80245db72a745e75de6237ae11405..eb6590ded40dfdaec09b08a7eaf415b4211733ee 100644 --- a/arch/arm/plat-spear/include/plat/pl080.h +++ b/arch/arm/plat-spear/include/plat/pl080.h @@ -14,8 +14,8 @@ #ifndef __PLAT_PL080_H #define __PLAT_PL080_H -struct pl08x_dma_chan; -int pl080_get_signal(struct pl08x_dma_chan *ch); -void pl080_put_signal(struct pl08x_dma_chan *ch); +struct pl08x_channel_data; +int pl080_get_signal(const struct pl08x_channel_data *cd); +void pl080_put_signal(const struct pl08x_channel_data *cd, int signal); #endif /* __PLAT_PL080_H */ diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c index 12cf27f935f97372854cc1a0bd2c41251971499f..cfa1199d0f4a86152fddfae9f83d3074c330e3a8 100644 --- a/arch/arm/plat-spear/pl080.c +++ b/arch/arm/plat-spear/pl080.c @@ -27,9 +27,8 @@ struct { unsigned char val; } signals[16] = {{0, 0}, }; -int pl080_get_signal(struct pl08x_dma_chan *ch) +int pl080_get_signal(const struct pl08x_channel_data *cd) { - const struct pl08x_channel_data *cd = ch->cd; unsigned int signal = cd->min_signal, val; unsigned long flags; @@ -63,18 +62,17 @@ int pl080_get_signal(struct pl08x_dma_chan *ch) return signal; } -void pl080_put_signal(struct pl08x_dma_chan *ch) +void pl080_put_signal(const struct pl08x_channel_data *cd, int signal) { - const struct pl08x_channel_data *cd = ch->cd; unsigned long flags; spin_lock_irqsave(&lock, flags); /* if signal is not used */ - if (!signals[cd->min_signal].busy) + if (!signals[signal].busy) BUG(); - signals[cd->min_signal].busy--; + signals[signal].busy--; spin_unlock_irqrestore(&lock, flags); } diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 4fa9903b83cf5dbb54a15623ec45fd00552d8521..cc926c98598141a2fbcdb762148ec17782982d06 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -7,18 +7,20 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Basic entry code, called from the kernel's undefined instruction trap. - * r0 = faulted instruction - * r5 = faulted PC+4 - * r9 = successful return - * r10 = thread_info structure - * lr = failure return */ #include #include #include "../kernel/entry-header.S" +@ VFP entry point. +@ +@ r0 = instruction opcode (32-bit ARM or two 16-bit Thumb) +@ r2 = PC value to resume execution after successful emulation +@ r9 = normal "successful" return address +@ r10 = this threads thread_info structure +@ lr = unrecognised instruction return address +@ IRQs disabled. +@ ENTRY(do_vfp) #ifdef CONFIG_PREEMPT ldr r4, [r10, #TI_PREEMPT] @ get preempt count diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index d50f0e486cf2b322b6e8eff1baa7c73272e66c70..ea0349f6358658065b52aa1473e877ee4fa8f5ba 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -62,13 +62,13 @@ @ VFP hardware support entry point. @ -@ r0 = faulted instruction -@ r2 = faulted PC+4 -@ r9 = successful return +@ r0 = instruction opcode (32-bit ARM or two 16-bit Thumb) +@ r2 = PC value to resume execution after successful emulation +@ r9 = normal "successful" return address @ r10 = vfp_state union @ r11 = CPU number -@ lr = failure return - +@ lr = unrecognised instruction return address +@ IRQs enabled. ENTRY(vfp_support_entry) DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10 @@ -162,9 +162,12 @@ vfp_hw_state_valid: @ exception before retrying branch @ out before setting an FPEXC that @ stops us reading stuff - VFPFMXR FPEXC, r1 @ restore FPEXC last - sub r2, r2, #4 - str r2, [sp, #S_PC] @ retry the instruction + VFPFMXR FPEXC, r1 @ Restore FPEXC last + sub r2, r2, #4 @ Retry current instruction - if Thumb + str r2, [sp, #S_PC] @ mode it's two 16-bit instructions, + @ else it's one 32-bit instruction, so + @ always subtract 4 from the following + @ instruction address. #ifdef CONFIG_PREEMPT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 586961929e964ce63d70987c0c7c36184aff4db8..c834b32af275d73d4cd760efeb4a365e940f1df7 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -457,10 +457,16 @@ static int vfp_pm_suspend(void) /* disable, just in case */ fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); + } else if (vfp_current_hw_state[ti->cpu]) { +#ifndef CONFIG_SMP + fmxr(FPEXC, fpexc | FPEXC_EN); + vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc); + fmxr(FPEXC, fpexc); +#endif } /* clear any information we had about last context state */ - memset(vfp_current_hw_state, 0, sizeof(vfp_current_hw_state)); + vfp_current_hw_state[ti->cpu] = NULL; return 0; } @@ -713,8 +719,10 @@ static int __init vfp_init(void) if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) elf_hwcap |= HWCAP_NEON; #endif +#ifdef CONFIG_VFPv3 if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000) elf_hwcap |= HWCAP_VFPv4; +#endif } } return 0; diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index f34861920634d15c9de2b1149aa8562a767e64f1..c7092e6057c56e4fa856362263ed4ac49a95d32e 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -38,6 +38,7 @@ config BLACKFIN select GENERIC_ATOMIC64 select GENERIC_IRQ_PROBE select IRQ_PER_CPU if SMP + select USE_GENERIC_SMP_HELPERS if SMP select HAVE_NMI_WATCHDOG if NMI_WATCHDOG select GENERIC_SMP_IDLE_THREAD select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index d3d7e64ca96dacfa41bc298733ef3ed2076c7d3e..66cf00095b8487210b3187cbf41072bc3d80406b 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -20,7 +20,6 @@ endif KBUILD_AFLAGS += $(call cc-option,-mno-fdpic) KBUILD_CFLAGS_MODULE += -mlong-calls LDFLAGS += -m elf32bfin -KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h index dc3d144b4bb5930a396f73d9bce48f67ca1c6365..9631598dcc5d120321febba77a85b6309bbdea7b 100644 --- a/arch/blackfin/include/asm/smp.h +++ b/arch/blackfin/include/asm/smp.h @@ -18,6 +18,8 @@ #define raw_smp_processor_id() blackfin_core_id() extern void bfin_relocate_coreb_l1_mem(void); +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); #if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1) asmlinkage void blackfin_icache_flush_range_l1(unsigned long *ptr); diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index ada8f0fc71e4731fc9bb619aacc7a77df50d7d54..fb96e607adcf815890de6ce475c55a3cfd76a42b 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(reserved_mem_dcache_on); #ifdef CONFIG_MTD_UCLINUX extern struct map_info uclinux_ram_map; unsigned long memory_mtd_end, memory_mtd_start, mtd_size; -unsigned long _ebss; EXPORT_SYMBOL(memory_mtd_end); EXPORT_SYMBOL(memory_mtd_start); EXPORT_SYMBOL(mtd_size); diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 00bbe672b3b308433445d39461637f3a0d396573..a40151306b77ff301b9b152b205795a6fece4b9c 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -48,10 +48,13 @@ unsigned long blackfin_iflush_l1_entry[NR_CPUS]; struct blackfin_initial_pda __cpuinitdata initial_pda_coreb; -#define BFIN_IPI_TIMER 0 -#define BFIN_IPI_RESCHEDULE 1 -#define BFIN_IPI_CALL_FUNC 2 -#define BFIN_IPI_CPU_STOP 3 +enum ipi_message_type { + BFIN_IPI_TIMER, + BFIN_IPI_RESCHEDULE, + BFIN_IPI_CALL_FUNC, + BFIN_IPI_CALL_FUNC_SINGLE, + BFIN_IPI_CPU_STOP, +}; struct blackfin_flush_data { unsigned long start; @@ -60,35 +63,20 @@ struct blackfin_flush_data { void *secondary_stack; - -struct smp_call_struct { - void (*func)(void *info); - void *info; - int wait; - cpumask_t *waitmask; -}; - static struct blackfin_flush_data smp_flush_data; static DEFINE_SPINLOCK(stop_lock); -struct ipi_message { - unsigned long type; - struct smp_call_struct call_struct; -}; - /* A magic number - stress test shows this is safe for common cases */ #define BFIN_IPI_MSGQ_LEN 5 /* Simple FIFO buffer, overflow leads to panic */ -struct ipi_message_queue { - spinlock_t lock; +struct ipi_data { unsigned long count; - unsigned long head; /* head of the queue */ - struct ipi_message ipi_message[BFIN_IPI_MSGQ_LEN]; + unsigned long bits; }; -static DEFINE_PER_CPU(struct ipi_message_queue, ipi_msg_queue); +static DEFINE_PER_CPU(struct ipi_data, bfin_ipi); static void ipi_cpu_stop(unsigned int cpu) { @@ -129,28 +117,6 @@ static void ipi_flush_icache(void *info) blackfin_icache_flush_range(fdata->start, fdata->end); } -static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) -{ - int wait; - void (*func)(void *info); - void *info; - func = msg->call_struct.func; - info = msg->call_struct.info; - wait = msg->call_struct.wait; - func(info); - if (wait) { -#ifdef __ARCH_SYNC_CORE_DCACHE - /* - * 'wait' usually means synchronization between CPUs. - * Invalidate D cache in case shared data was changed - * by func() to ensure cache coherence. - */ - resync_core_dcache(); -#endif - cpumask_clear_cpu(cpu, msg->call_struct.waitmask); - } -} - /* Use IRQ_SUPPLE_0 to request reschedule. * When returning from interrupt to user space, * there is chance to reschedule */ @@ -172,152 +138,95 @@ void ipi_timer(void) static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) { - struct ipi_message *msg; - struct ipi_message_queue *msg_queue; + struct ipi_data *bfin_ipi_data; unsigned int cpu = smp_processor_id(); - unsigned long flags; + unsigned long pending; + unsigned long msg; platform_clear_ipi(cpu, IRQ_SUPPLE_1); - msg_queue = &__get_cpu_var(ipi_msg_queue); - - spin_lock_irqsave(&msg_queue->lock, flags); - - while (msg_queue->count) { - msg = &msg_queue->ipi_message[msg_queue->head]; - switch (msg->type) { - case BFIN_IPI_TIMER: - ipi_timer(); - break; - case BFIN_IPI_RESCHEDULE: - scheduler_ipi(); - break; - case BFIN_IPI_CALL_FUNC: - ipi_call_function(cpu, msg); - break; - case BFIN_IPI_CPU_STOP: - ipi_cpu_stop(cpu); - break; - default: - printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n", - cpu, msg->type); - break; - } - msg_queue->head++; - msg_queue->head %= BFIN_IPI_MSGQ_LEN; - msg_queue->count--; + bfin_ipi_data = &__get_cpu_var(bfin_ipi); + + while ((pending = xchg(&bfin_ipi_data->bits, 0)) != 0) { + msg = 0; + do { + msg = find_next_bit(&pending, BITS_PER_LONG, msg + 1); + switch (msg) { + case BFIN_IPI_TIMER: + ipi_timer(); + break; + case BFIN_IPI_RESCHEDULE: + scheduler_ipi(); + break; + case BFIN_IPI_CALL_FUNC: + generic_smp_call_function_interrupt(); + break; + + case BFIN_IPI_CALL_FUNC_SINGLE: + generic_smp_call_function_single_interrupt(); + break; + + case BFIN_IPI_CPU_STOP: + ipi_cpu_stop(cpu); + break; + } + } while (msg < BITS_PER_LONG); + + smp_mb(); } - spin_unlock_irqrestore(&msg_queue->lock, flags); return IRQ_HANDLED; } -static void ipi_queue_init(void) +static void bfin_ipi_init(void) { unsigned int cpu; - struct ipi_message_queue *msg_queue; + struct ipi_data *bfin_ipi_data; for_each_possible_cpu(cpu) { - msg_queue = &per_cpu(ipi_msg_queue, cpu); - spin_lock_init(&msg_queue->lock); - msg_queue->count = 0; - msg_queue->head = 0; + bfin_ipi_data = &per_cpu(bfin_ipi, cpu); + bfin_ipi_data->bits = 0; + bfin_ipi_data->count = 0; } } -static inline void smp_send_message(cpumask_t callmap, unsigned long type, - void (*func) (void *info), void *info, int wait) +void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg) { unsigned int cpu; - struct ipi_message_queue *msg_queue; - struct ipi_message *msg; - unsigned long flags, next_msg; - cpumask_t waitmask; /* waitmask is shared by all cpus */ - - cpumask_copy(&waitmask, &callmap); - for_each_cpu(cpu, &callmap) { - msg_queue = &per_cpu(ipi_msg_queue, cpu); - spin_lock_irqsave(&msg_queue->lock, flags); - if (msg_queue->count < BFIN_IPI_MSGQ_LEN) { - next_msg = (msg_queue->head + msg_queue->count) - % BFIN_IPI_MSGQ_LEN; - msg = &msg_queue->ipi_message[next_msg]; - msg->type = type; - if (type == BFIN_IPI_CALL_FUNC) { - msg->call_struct.func = func; - msg->call_struct.info = info; - msg->call_struct.wait = wait; - msg->call_struct.waitmask = &waitmask; - } - msg_queue->count++; - } else - panic("IPI message queue overflow\n"); - spin_unlock_irqrestore(&msg_queue->lock, flags); + struct ipi_data *bfin_ipi_data; + unsigned long flags; + + local_irq_save(flags); + + for_each_cpu(cpu, cpumask) { + bfin_ipi_data = &per_cpu(bfin_ipi, cpu); + smp_mb(); + set_bit(msg, &bfin_ipi_data->bits); + bfin_ipi_data->count++; platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1); } - if (wait) { - while (!cpumask_empty(&waitmask)) - blackfin_dcache_invalidate_range( - (unsigned long)(&waitmask), - (unsigned long)(&waitmask)); -#ifdef __ARCH_SYNC_CORE_DCACHE - /* - * Invalidate D cache in case shared data was changed by - * other processors to ensure cache coherence. - */ - resync_core_dcache(); -#endif - } + local_irq_restore(flags); } -int smp_call_function(void (*func)(void *info), void *info, int wait) +void arch_send_call_function_single_ipi(int cpu) { - cpumask_t callmap; - - preempt_disable(); - cpumask_copy(&callmap, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &callmap); - if (!cpumask_empty(&callmap)) - smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); - - preempt_enable(); - - return 0; + send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC_SINGLE); } -EXPORT_SYMBOL_GPL(smp_call_function); -int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, - int wait) +void arch_send_call_function_ipi_mask(const struct cpumask *mask) { - unsigned int cpu = cpuid; - cpumask_t callmap; - - if (cpu_is_offline(cpu)) - return 0; - cpumask_clear(&callmap); - cpumask_set_cpu(cpu, &callmap); - - smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); - - return 0; + send_ipi(mask, BFIN_IPI_CALL_FUNC); } -EXPORT_SYMBOL_GPL(smp_call_function_single); void smp_send_reschedule(int cpu) { - cpumask_t callmap; - /* simply trigger an ipi */ - - cpumask_clear(&callmap); - cpumask_set_cpu(cpu, &callmap); - - smp_send_message(callmap, BFIN_IPI_RESCHEDULE, NULL, NULL, 0); + send_ipi(cpumask_of(cpu), BFIN_IPI_RESCHEDULE); return; } void smp_send_msg(const struct cpumask *mask, unsigned long type) { - smp_send_message(*mask, type, NULL, NULL, 0); + send_ipi(mask, type); } void smp_timer_broadcast(const struct cpumask *mask) @@ -333,7 +242,7 @@ void smp_send_stop(void) cpumask_copy(&callmap, cpu_online_mask); cpumask_clear_cpu(smp_processor_id(), &callmap); if (!cpumask_empty(&callmap)) - smp_send_message(callmap, BFIN_IPI_CPU_STOP, NULL, NULL, 0); + send_ipi(&callmap, BFIN_IPI_CPU_STOP); preempt_enable(); @@ -436,7 +345,7 @@ void __init smp_prepare_boot_cpu(void) void __init smp_prepare_cpus(unsigned int max_cpus) { platform_prepare_cpus(max_cpus); - ipi_queue_init(); + bfin_ipi_init(); platform_request_ipi(IRQ_SUPPLE_0, ipi_handler_int0); platform_request_ipi(IRQ_SUPPLE_1, ipi_handler_int1); } diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig index 052f81a762398670188778a0645c8ed9ad1a4982..983c859e40b7b57e5eb1da68094524b7fe1c1301 100644 --- a/arch/c6x/Kconfig +++ b/arch/c6x/Kconfig @@ -6,6 +6,7 @@ config C6X def_bool y select CLKDEV_LOOKUP + select GENERIC_ATOMIC64 select GENERIC_IRQ_SHOW select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG diff --git a/arch/c6x/include/asm/Kbuild b/arch/c6x/include/asm/Kbuild index 3af601e31e66ea5180ee498b04009c431f33e989..f08e89183cda452844fda74bc27a4db8823647d1 100644 --- a/arch/c6x/include/asm/Kbuild +++ b/arch/c6x/include/asm/Kbuild @@ -2,6 +2,7 @@ include include/asm-generic/Kbuild.asm generic-y += atomic.h generic-y += auxvec.h +generic-y += barrier.h generic-y += bitsperlong.h generic-y += bugs.h generic-y += cputime.h diff --git a/arch/c6x/include/asm/barrier.h b/arch/c6x/include/asm/barrier.h deleted file mode 100644 index 538240e85909194cf3b90575844880b7431cd453..0000000000000000000000000000000000000000 --- a/arch/c6x/include/asm/barrier.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Port on Texas Instruments TMS320C6x architecture - * - * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated - * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASM_C6X_BARRIER_H -#define _ASM_C6X_BARRIER_H - -#define nop() asm("NOP\n"); - -#define mb() barrier() -#define rmb() barrier() -#define wmb() barrier() -#define set_mb(var, value) do { var = value; mb(); } while (0) -#define set_wmb(var, value) do { var = value; wmb(); } while (0) - -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while (0) - -#endif /* _ASM_C6X_BARRIER_H */ diff --git a/arch/c6x/include/asm/cache.h b/arch/c6x/include/asm/cache.h index 6d521d96d94136e25cd83158a5706a1c6681a84f..09c5a0f5f4d1778156a5ee83715e6a2aec7f0441 100644 --- a/arch/c6x/include/asm/cache.h +++ b/arch/c6x/include/asm/cache.h @@ -1,7 +1,7 @@ /* * Port on Texas Instruments TMS320C6x architecture * - * Copyright (C) 2005, 2006, 2009, 2010 Texas Instruments Incorporated + * Copyright (C) 2005, 2006, 2009, 2010, 2012 Texas Instruments Incorporated * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) * * This program is free software; you can redistribute it and/or modify @@ -16,9 +16,14 @@ /* * Cache line size */ -#define L1D_CACHE_BYTES 64 -#define L1P_CACHE_BYTES 32 -#define L2_CACHE_BYTES 128 +#define L1D_CACHE_SHIFT 6 +#define L1D_CACHE_BYTES (1 << L1D_CACHE_SHIFT) + +#define L1P_CACHE_SHIFT 5 +#define L1P_CACHE_BYTES (1 << L1P_CACHE_SHIFT) + +#define L2_CACHE_SHIFT 7 +#define L2_CACHE_BYTES (1 << L2_CACHE_SHIFT) /* * L2 used as cache @@ -29,7 +34,8 @@ * For practical reasons the L1_CACHE_BYTES defines should not be smaller than * the L2 line size */ -#define L1_CACHE_BYTES L2_CACHE_BYTES +#define L1_CACHE_SHIFT L2_CACHE_SHIFT +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) #define L2_CACHE_ALIGN_LOW(x) \ (((x) & ~(L2_CACHE_BYTES - 1))) diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 954d81e2e837648d80a67fb9648dad29dd6f39c4..7913695b2fcbe5605830b9e1da6441188a591b8b 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -234,5 +234,4 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_T10DIF=y -CONFIG_MISC_DEVICES=y CONFIG_INTEL_IOMMU=y diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 91c41ecfa6d9e0fad551ef268cab3f01200af2d8..f8e91336542392236c878276ad8abcef4d786166 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -209,4 +209,3 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y CONFIG_CRYPTO_MD5=y -CONFIG_MISC_DEVICES=y diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 6f38b6120d96bc841f4563c1fe3202ae7a78b7f3..440578850ae52bad9df8961aeec12d52f9a94ceb 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -497,7 +497,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) srat_num_cpus++; } -void __init +int __init acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { unsigned long paddr, size; @@ -512,7 +512,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) /* Ignore disabled entries */ if (!(ma->flags & ACPI_SRAT_MEM_ENABLED)) - return; + return -1; /* record this node in proximity bitmap */ pxm_bit_set(pxm); @@ -531,6 +531,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) p->size = size; p->nid = pxm; num_node_memblks++; + return 0; } void __init acpi_numa_arch_fixup(void) diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index 5c3e0888265a80a2fe75d48f6ed8177aeb3aad7f..1034884b77da428c59190f9841229fc3e3cb8f41 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -23,7 +23,6 @@ #include #include #include -#include /* for rand_initialize_irq() */ #include #include #include diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index d7f558c1e7117bfff75a056d4fee9213c6a4b7fb..3fa4bc536953c9494eabc776b1c77a980cb2e148 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -2353,7 +2353,6 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t */ insert_vm_struct(mm, vma); - mm->total_vm += size >> PAGE_SHIFT; vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file, vma_pages(vma)); up_write(&task->mm->mmap_sem); diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 0b0f8b8c4a266571d33fcd61900161d7961d8cea..b22df9410dceb75169f4127bb897befb6f4960ad 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -5,6 +5,7 @@ config M68K select HAVE_AOUT if MMU select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW + select GENERIC_ATOMIC64 select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS select GENERIC_CPU_DEVICES select GENERIC_STRNCPY_FROM_USER if MMU @@ -54,18 +55,6 @@ config ZONE_DMA bool default y -config CPU_HAS_NO_BITFIELDS - bool - -config CPU_HAS_NO_MULDIV64 - bool - -config CPU_HAS_ADDRESS_SPACES - bool - -config FPU - bool - config HZ int default 1000 if CLEOPATRA diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 43a9f8f1b8eb43d41049051358b08667684cc6f0..c4eb79edecec04d58d5ad681c389118a3472cec5 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -28,6 +28,7 @@ config COLDFIRE select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 select GENERIC_CSUM + select HAVE_CLK endchoice @@ -37,6 +38,7 @@ config M68000 bool select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 + select CPU_HAS_NO_UNALIGNED select GENERIC_CSUM help The Freescale (was Motorola) 68000 CPU is the first generation of @@ -48,6 +50,7 @@ config M68000 config MCPU32 bool select CPU_HAS_NO_BITFIELDS + select CPU_HAS_NO_UNALIGNED help The Freescale (was then Motorola) CPU32 is a CPU core that is based on the 68020 processor. For the most part it is used in @@ -56,7 +59,6 @@ config MCPU32 config M68020 bool "68020 support" depends on MMU - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68020 @@ -67,7 +69,6 @@ config M68020 config M68030 bool "68030 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68030 @@ -77,7 +78,6 @@ config M68030 config M68040 bool "68040 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68LC040 @@ -88,7 +88,6 @@ config M68040 config M68060 bool "68060 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68060 @@ -376,6 +375,18 @@ config NODES_SHIFT default "3" depends on !SINGLE_MEMORY_CHUNK +config CPU_HAS_NO_BITFIELDS + bool + +config CPU_HAS_NO_MULDIV64 + bool + +config CPU_HAS_NO_UNALIGNED + bool + +config CPU_HAS_ADDRESS_SPACES + bool + config FPU bool diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c index 0a30406b9442a4961b8f40fbc2832e0cc2079889..f5565d6eeb8e9bbe24b9ef1df22dea0310f9c4ee 100644 --- a/arch/m68k/apollo/config.c +++ b/arch/m68k/apollo/config.c @@ -177,8 +177,8 @@ irqreturn_t dn_timer_int(int irq, void *dev_id) timer_handler(irq, dev_id); - x=*(volatile unsigned char *)(timer+3); - x=*(volatile unsigned char *)(timer+5); + x = *(volatile unsigned char *)(apollo_timer + 3); + x = *(volatile unsigned char *)(apollo_timer + 5); return IRQ_HANDLED; } @@ -186,17 +186,17 @@ irqreturn_t dn_timer_int(int irq, void *dev_id) void dn_sched_init(irq_handler_t timer_routine) { /* program timer 1 */ - *(volatile unsigned char *)(timer+3)=0x01; - *(volatile unsigned char *)(timer+1)=0x40; - *(volatile unsigned char *)(timer+5)=0x09; - *(volatile unsigned char *)(timer+7)=0xc4; + *(volatile unsigned char *)(apollo_timer + 3) = 0x01; + *(volatile unsigned char *)(apollo_timer + 1) = 0x40; + *(volatile unsigned char *)(apollo_timer + 5) = 0x09; + *(volatile unsigned char *)(apollo_timer + 7) = 0xc4; /* enable IRQ of PIC B */ *(volatile unsigned char *)(pica+1)&=(~8); #if 0 - printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3)); - printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3)); + printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3)); + printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3)); #endif if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine)) diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index eafa2539a8ee79dbcc65ea929ab082c767d93029..a74e5d95c384941583d99096bae1175634c9b4cb 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -1,4 +1,29 @@ include include/asm-generic/Kbuild.asm header-y += cachectl.h +generic-y += bitsperlong.h +generic-y += cputime.h +generic-y += device.h +generic-y += emergency-restart.h +generic-y += errno.h +generic-y += futex.h +generic-y += ioctl.h +generic-y += ipcbuf.h +generic-y += irq_regs.h +generic-y += kdebug.h +generic-y += kmap_types.h +generic-y += kvm_para.h +generic-y += local64.h +generic-y += local.h +generic-y += mman.h +generic-y += mutex.h +generic-y += percpu.h +generic-y += resource.h +generic-y += scatterlist.h +generic-y += sections.h +generic-y += siginfo.h +generic-y += statfs.h +generic-y += topology.h +generic-y += types.h generic-y += word-at-a-time.h +generic-y += xor.h diff --git a/arch/m68k/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h deleted file mode 100644 index 6bb8f02685a22ac6e6d8a15de0f25d42bf5b7817..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/MC68332.h +++ /dev/null @@ -1,152 +0,0 @@ - -/* include/asm-m68knommu/MC68332.h: '332 control registers - * - * Copyright (C) 1998 Kenneth Albanowski , - * - */ - -#ifndef _MC68332_H_ -#define _MC68332_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) - -#define PORTE_ADDR 0xfffa11 -#define PORTE BYTE_REF(PORTE_ADDR) -#define DDRE_ADDR 0xfffa15 -#define DDRE BYTE_REF(DDRE_ADDR) -#define PEPAR_ADDR 0xfffa17 -#define PEPAR BYTE_REF(PEPAR_ADDR) - -#define PORTF_ADDR 0xfffa19 -#define PORTF BYTE_REF(PORTF_ADDR) -#define DDRF_ADDR 0xfffa1d -#define DDRF BYTE_REF(DDRF_ADDR) -#define PFPAR_ADDR 0xfffa1f -#define PFPAR BYTE_REF(PFPAR_ADDR) - -#define PORTQS_ADDR 0xfffc15 -#define PORTQS BYTE_REF(PORTQS_ADDR) -#define DDRQS_ADDR 0xfffc17 -#define DDRQS BYTE_REF(DDRQS_ADDR) -#define PQSPAR_ADDR 0xfffc16 -#define PQSPAR BYTE_REF(PQSPAR_ADDR) - -#define CSPAR0_ADDR 0xFFFA44 -#define CSPAR0 WORD_REF(CSPAR0_ADDR) -#define CSPAR1_ADDR 0xFFFA46 -#define CSPAR1 WORD_REF(CSPAR1_ADDR) -#define CSARBT_ADDR 0xFFFA48 -#define CSARBT WORD_REF(CSARBT_ADDR) -#define CSOPBT_ADDR 0xFFFA4A -#define CSOPBT WORD_REF(CSOPBT_ADDR) -#define CSBAR0_ADDR 0xFFFA4C -#define CSBAR0 WORD_REF(CSBAR0_ADDR) -#define CSOR0_ADDR 0xFFFA4E -#define CSOR0 WORD_REF(CSOR0_ADDR) -#define CSBAR1_ADDR 0xFFFA50 -#define CSBAR1 WORD_REF(CSBAR1_ADDR) -#define CSOR1_ADDR 0xFFFA52 -#define CSOR1 WORD_REF(CSOR1_ADDR) -#define CSBAR2_ADDR 0xFFFA54 -#define CSBAR2 WORD_REF(CSBAR2_ADDR) -#define CSOR2_ADDR 0xFFFA56 -#define CSOR2 WORD_REF(CSOR2_ADDR) -#define CSBAR3_ADDR 0xFFFA58 -#define CSBAR3 WORD_REF(CSBAR3_ADDR) -#define CSOR3_ADDR 0xFFFA5A -#define CSOR3 WORD_REF(CSOR3_ADDR) -#define CSBAR4_ADDR 0xFFFA5C -#define CSBAR4 WORD_REF(CSBAR4_ADDR) -#define CSOR4_ADDR 0xFFFA5E -#define CSOR4 WORD_REF(CSOR4_ADDR) -#define CSBAR5_ADDR 0xFFFA60 -#define CSBAR5 WORD_REF(CSBAR5_ADDR) -#define CSOR5_ADDR 0xFFFA62 -#define CSOR5 WORD_REF(CSOR5_ADDR) -#define CSBAR6_ADDR 0xFFFA64 -#define CSBAR6 WORD_REF(CSBAR6_ADDR) -#define CSOR6_ADDR 0xFFFA66 -#define CSOR6 WORD_REF(CSOR6_ADDR) -#define CSBAR7_ADDR 0xFFFA68 -#define CSBAR7 WORD_REF(CSBAR7_ADDR) -#define CSOR7_ADDR 0xFFFA6A -#define CSOR7 WORD_REF(CSOR7_ADDR) -#define CSBAR8_ADDR 0xFFFA6C -#define CSBAR8 WORD_REF(CSBAR8_ADDR) -#define CSOR8_ADDR 0xFFFA6E -#define CSOR8 WORD_REF(CSOR8_ADDR) -#define CSBAR9_ADDR 0xFFFA70 -#define CSBAR9 WORD_REF(CSBAR9_ADDR) -#define CSOR9_ADDR 0xFFFA72 -#define CSOR9 WORD_REF(CSOR9_ADDR) -#define CSBAR10_ADDR 0xFFFA74 -#define CSBAR10 WORD_REF(CSBAR10_ADDR) -#define CSOR10_ADDR 0xFFFA76 -#define CSOR10 WORD_REF(CSOR10_ADDR) - -#define CSOR_MODE_ASYNC 0x0000 -#define CSOR_MODE_SYNC 0x8000 -#define CSOR_MODE_MASK 0x8000 -#define CSOR_BYTE_DISABLE 0x0000 -#define CSOR_BYTE_UPPER 0x4000 -#define CSOR_BYTE_LOWER 0x2000 -#define CSOR_BYTE_BOTH 0x6000 -#define CSOR_BYTE_MASK 0x6000 -#define CSOR_RW_RSVD 0x0000 -#define CSOR_RW_READ 0x0800 -#define CSOR_RW_WRITE 0x1000 -#define CSOR_RW_BOTH 0x1800 -#define CSOR_RW_MASK 0x1800 -#define CSOR_STROBE_DS 0x0400 -#define CSOR_STROBE_AS 0x0000 -#define CSOR_STROBE_MASK 0x0400 -#define CSOR_DSACK_WAIT(x) (wait << 6) -#define CSOR_DSACK_FTERM (14 << 6) -#define CSOR_DSACK_EXTERNAL (15 << 6) -#define CSOR_DSACK_MASK 0x03c0 -#define CSOR_SPACE_CPU 0x0000 -#define CSOR_SPACE_USER 0x0010 -#define CSOR_SPACE_SU 0x0020 -#define CSOR_SPACE_BOTH 0x0030 -#define CSOR_SPACE_MASK 0x0030 -#define CSOR_IPL_ALL 0x0000 -#define CSOR_IPL_PRIORITY(x) (x << 1) -#define CSOR_IPL_MASK 0x000e -#define CSOR_AVEC_ON 0x0001 -#define CSOR_AVEC_OFF 0x0000 -#define CSOR_AVEC_MASK 0x0001 - -#define CSBAR_ADDR(x) ((addr >> 11) << 3) -#define CSBAR_ADDR_MASK 0xfff8 -#define CSBAR_BLKSIZE_2K 0x0000 -#define CSBAR_BLKSIZE_8K 0x0001 -#define CSBAR_BLKSIZE_16K 0x0002 -#define CSBAR_BLKSIZE_64K 0x0003 -#define CSBAR_BLKSIZE_128K 0x0004 -#define CSBAR_BLKSIZE_256K 0x0005 -#define CSBAR_BLKSIZE_512K 0x0006 -#define CSBAR_BLKSIZE_1M 0x0007 -#define CSBAR_BLKSIZE_MASK 0x0007 - -#define CSPAR_DISC 0 -#define CSPAR_ALT 1 -#define CSPAR_CS8 2 -#define CSPAR_CS16 3 -#define CSPAR_MASK 3 - -#define CSPAR0_CSBOOT(x) (x << 0) -#define CSPAR0_CS0(x) (x << 2) -#define CSPAR0_CS1(x) (x << 4) -#define CSPAR0_CS2(x) (x << 6) -#define CSPAR0_CS3(x) (x << 8) -#define CSPAR0_CS4(x) (x << 10) -#define CSPAR0_CS5(x) (x << 12) - -#define CSPAR1_CS6(x) (x << 0) -#define CSPAR1_CS7(x) (x << 2) -#define CSPAR1_CS8(x) (x << 4) -#define CSPAR1_CS9(x) (x << 6) -#define CSPAR1_CS10(x) (x << 8) - -#endif diff --git a/arch/m68k/include/asm/apollodma.h b/arch/m68k/include/asm/apollodma.h deleted file mode 100644 index 954adc851adb3659f1d8387e520708a3f84b14da..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/apollodma.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * linux/include/asm/dma.h: Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - */ - -#ifndef _ASM_APOLLO_DMA_H -#define _ASM_APOLLO_DMA_H - -#include /* need byte IO */ -#include /* And spinlocks */ -#include - - -#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val)) -#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE))) - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * DMA transfers are limited to the lower 16MB of _physical_ memory. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -#define MAX_DMA_CHANNELS 8 - -/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000) - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */ -#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */ -#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */ -#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */ -#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */ -#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */ -#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */ -#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */ - -#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */ -#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */ -#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */ -#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */ -#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */ -#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */ -#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */ -#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */ - -#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */ -#define DMA_ADDR_1 (IO_DMA1_BASE+0x02) -#define DMA_ADDR_2 (IO_DMA1_BASE+0x04) -#define DMA_ADDR_3 (IO_DMA1_BASE+0x06) -#define DMA_ADDR_4 (IO_DMA2_BASE+0x00) -#define DMA_ADDR_5 (IO_DMA2_BASE+0x04) -#define DMA_ADDR_6 (IO_DMA2_BASE+0x08) -#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C) - -#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */ -#define DMA_CNT_1 (IO_DMA1_BASE+0x03) -#define DMA_CNT_2 (IO_DMA1_BASE+0x05) -#define DMA_CNT_3 (IO_DMA1_BASE+0x07) -#define DMA_CNT_4 (IO_DMA2_BASE+0x02) -#define DMA_CNT_5 (IO_DMA2_BASE+0x06) -#define DMA_CNT_6 (IO_DMA2_BASE+0x0A) -#define DMA_CNT_7 (IO_DMA2_BASE+0x0E) - -#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ -#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - -#define DMA_8BIT 0 -#define DMA_16BIT 1 -#define DMA_BUSMASTER 2 - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr, DMA1_MASK_REG); - else - dma_outb(dmanr & 3, DMA2_MASK_REG); -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr<=3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr&3), DMA2_MODE_REG); -} - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - if (dmanr <= 3) { - dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - } else { - dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - } -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - } else { - dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - } -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE - : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - - return (dmanr<=3)? count : (count<<1); -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -/* These are in arch/m68k/apollo/dma.c: */ -extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type); -extern void dma_unmap_page(unsigned short dma_addr); - -#endif /* _ASM_APOLLO_DMA_H */ diff --git a/arch/m68k/include/asm/apollohw.h b/arch/m68k/include/asm/apollohw.h index a1373b9aa2811535728a5e95c07fdd827b6099b1..635ef4f890102b187ef86710ceb341c5af91bdb5 100644 --- a/arch/m68k/include/asm/apollohw.h +++ b/arch/m68k/include/asm/apollohw.h @@ -98,7 +98,7 @@ extern u_long timer_physaddr; #define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr)) #define pica (IO_BASE + pica_physaddr) #define picb (IO_BASE + picb_physaddr) -#define timer (IO_BASE + timer_physaddr) +#define apollo_timer (IO_BASE + timer_physaddr) #define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000)) #define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE) diff --git a/arch/m68k/include/asm/bitsperlong.h b/arch/m68k/include/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0c13b29dd814f403f2fd4efb3b36be0619..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/cputime.h b/arch/m68k/include/asm/cputime.h deleted file mode 100644 index c79c5e8923058bf2cc4b694c3bd0019f13fe503e..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68K_CPUTIME_H -#define __M68K_CPUTIME_H - -#include - -#endif /* __M68K_CPUTIME_H */ diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h index 9c09becfd4c97fa96c249288f8ef3056832e8f4e..12d8fe4f1d30b5e6fe0f86b191b05bd2b0307251 100644 --- a/arch/m68k/include/asm/delay.h +++ b/arch/m68k/include/asm/delay.h @@ -43,7 +43,7 @@ static inline void __delay(unsigned long loops) extern void __bad_udelay(void); -#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) +#ifdef CONFIG_CPU_HAS_NO_MULDIV64 /* * The simpler m68k and ColdFire processors do not have a 32*32->64 * multiply instruction. So we need to handle them a little differently. diff --git a/arch/m68k/include/asm/device.h b/arch/m68k/include/asm/device.h deleted file mode 100644 index d8f9872b0e2dc3587a9e658adc957f093b7906fb..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/arch/m68k/include/asm/emergency-restart.h b/arch/m68k/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c48e42e86978077354f2fa1b151f25c41df..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/m68k/include/asm/errno.h b/arch/m68k/include/asm/errno.h deleted file mode 100644 index 0d4e188d6ef6433a1929490444849fe08fda2444..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_ERRNO_H -#define _M68K_ERRNO_H - -#include - -#endif /* _M68K_ERRNO_H */ diff --git a/arch/m68k/include/asm/futex.h b/arch/m68k/include/asm/futex.h deleted file mode 100644 index 6a332a9f099c2eafbf78ee5f79056a349d41a775..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include - -#endif diff --git a/arch/m68k/include/asm/ioctl.h b/arch/m68k/include/asm/ioctl.h deleted file mode 100644 index b279fe06dfe5bea925eccf4b39c8908b23379b6a..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h deleted file mode 100644 index 84c7e51cb6d0befd2b3c013c8bbbbaad6ae02297..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/irq_regs.h b/arch/m68k/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b702704abfe23c0b8085f0fd84dcd3f5d5..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/kdebug.h b/arch/m68k/include/asm/kdebug.h deleted file mode 100644 index 6ece1b0376655be5d6ab0fbcdbc6369f7f68acac..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h deleted file mode 100644 index 3413cc1390ecffbd3e43c4c0bdecbfa74f791326..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/kmap_types.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_M68K_KMAP_TYPES_H -#define __ASM_M68K_KMAP_TYPES_H - -#include - -#endif /* __ASM_M68K_KMAP_TYPES_H */ diff --git a/arch/m68k/include/asm/kvm_para.h b/arch/m68k/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f0b957675dd06bdc00785ca2ec33cd56b9..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/local.h b/arch/m68k/include/asm/local.h deleted file mode 100644 index 6c259263e1f0645322e1fcb7cee9cd08966ca9f3..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_LOCAL_H -#define _ASM_M68K_LOCAL_H - -#include - -#endif /* _ASM_M68K_LOCAL_H */ diff --git a/arch/m68k/include/asm/local64.h b/arch/m68k/include/asm/local64.h deleted file mode 100644 index 36c93b5cc239b63b42fd2bdf44557e093f780e19..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/mac_mouse.h b/arch/m68k/include/asm/mac_mouse.h deleted file mode 100644 index 39a5c292eaee71b7e72a5824900360282b864c8a..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/mac_mouse.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _ASM_MAC_MOUSE_H -#define _ASM_MAC_MOUSE_H - -/* - * linux/include/asm-m68k/mac_mouse.h - * header file for Macintosh ADB mouse driver - * 27-10-97 Michael Schmitz - * copied from: - * header file for Atari Mouse driver - * by Robert de Vries (robert@and.nl) on 19Jul93 - */ - -struct mouse_status { - char buttons; - short dx; - short dy; - int ready; - int active; - wait_queue_head_t wait; - struct fasync_struct *fasyncptr; -}; - -#endif diff --git a/arch/m68k/include/asm/mcfmbus.h b/arch/m68k/include/asm/mcfmbus.h deleted file mode 100644 index 319899c47a2c96d1457293ba5676da554d994387..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/mcfmbus.h +++ /dev/null @@ -1,77 +0,0 @@ -/****************************************************************************/ - -/* - * mcfmbus.h -- Coldfire MBUS support defines. - * - * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) - */ - -/****************************************************************************/ - - -#ifndef mcfmbus_h -#define mcfmbus_h - - -#define MCFMBUS_BASE 0x280 -#define MCFMBUS_IRQ_VECTOR 0x19 -#define MCFMBUS_IRQ 0x1 -#define MCFMBUS_CLK 0x3f -#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/ -#define MCFMBUS_ADDRESS 0x01 - - -/* -* Define the 5307 MBUS register set addresses -*/ - -#define MCFMBUS_MADR 0x00 -#define MCFMBUS_MFDR 0x04 -#define MCFMBUS_MBCR 0x08 -#define MCFMBUS_MBSR 0x0C -#define MCFMBUS_MBDR 0x10 - - -#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/ - -#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/ - -/* -* Define bit flags in Control Register -*/ - -#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */ -#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */ -#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */ -#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */ -#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */ -#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */ - -/* -* Define bit flags in Status Register -*/ - -#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */ -#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */ -#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */ -#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */ -#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */ -#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */ -#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */ - -/* -* Define bit flags in DATA I/O Register -*/ - -#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */ - -#define MBUSIOCSCLOCK 1 -#define MBUSIOCGCLOCK 2 -#define MBUSIOCSADDR 3 -#define MBUSIOCGADDR 4 -#define MBUSIOCSSLADDR 5 -#define MBUSIOCGSLADDR 6 -#define MBUSIOCSSUBADDR 7 -#define MBUSIOCGSUBADDR 8 - -#endif diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h deleted file mode 100644 index 8eebf89f5ab17884a98543f3b37a3b710355083b..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/mman.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/mutex.h b/arch/m68k/include/asm/mutex.h deleted file mode 100644 index 458c1f7fbc1808d48982aa0c5fe89bfe3df2098c..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/arch/m68k/include/asm/percpu.h b/arch/m68k/include/asm/percpu.h deleted file mode 100644 index 0859d048faf59527cdfd6e08d023c88a3786187f..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_M68K_PERCPU_H -#define __ASM_M68K_PERCPU_H - -#include - -#endif /* __ASM_M68K_PERCPU_H */ diff --git a/arch/m68k/include/asm/resource.h b/arch/m68k/include/asm/resource.h deleted file mode 100644 index e7d35019f337d80a3958c3b5666ea2f1fd53102f..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_RESOURCE_H -#define _M68K_RESOURCE_H - -#include - -#endif /* _M68K_RESOURCE_H */ diff --git a/arch/m68k/include/asm/sbus.h b/arch/m68k/include/asm/sbus.h deleted file mode 100644 index bfe3ba147f2ee8620dc18320f63e01d43093242b..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/sbus.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * some sbus structures and macros to make usage of sbus drivers possible - */ - -#ifndef __M68K_SBUS_H -#define __M68K_SBUS_H - -struct sbus_dev { - struct { - unsigned int which_io; - unsigned int phys_addr; - } reg_addrs[1]; -}; - -/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */ -/* No SBUS on the Sun3, kludge -- sam */ - -static inline void _sbus_writeb(unsigned char val, unsigned long addr) -{ - *(volatile unsigned char *)addr = val; -} - -static inline unsigned char _sbus_readb(unsigned long addr) -{ - return *(volatile unsigned char *)addr; -} - -static inline void _sbus_writel(unsigned long val, unsigned long addr) -{ - *(volatile unsigned long *)addr = val; - -} - -extern inline unsigned long _sbus_readl(unsigned long addr) -{ - return *(volatile unsigned long *)addr; -} - - -#define sbus_readb(a) _sbus_readb((unsigned long)a) -#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a) -#define sbus_readl(a) _sbus_readl((unsigned long)a) -#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a) - -#endif diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h deleted file mode 100644 index 312505452a1e5791f053842da6d6f88affe936cb..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/scatterlist.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_SCATTERLIST_H -#define _M68K_SCATTERLIST_H - -#include - -#endif /* !(_M68K_SCATTERLIST_H) */ diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h deleted file mode 100644 index 5277e52715ec27cfd20d3c25dee440334ae510d9..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/sections.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _ASM_M68K_SECTIONS_H -#define _ASM_M68K_SECTIONS_H - -#include - -extern char _sbss[], _ebss[]; - -#endif /* _ASM_M68K_SECTIONS_H */ diff --git a/arch/m68k/include/asm/shm.h b/arch/m68k/include/asm/shm.h deleted file mode 100644 index fa56ec84a12642e5a9c4d02d433b6b39a85edf5b..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/shm.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _M68K_SHM_H -#define _M68K_SHM_H - - -/* format of page table entries that correspond to shared memory pages - currently out in swap space (see also mm/swap.c): - bits 0-1 (PAGE_PRESENT) is = 0 - bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE - bits 31..9 are used like this: - bits 15..9 (SHM_ID) the id of the shared memory segment - bits 30..16 (SHM_IDX) the index of the page within the shared memory segment - (actually only bits 25..16 get used since SHMMAX is so low) - bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach -*/ -/* on the m68k both bits 0 and 1 must be zero */ -/* format on the sun3 is similar, but bits 30, 31 are set to zero and all - others are reduced by 2. --m */ - -#ifndef CONFIG_SUN3 -#define SHM_ID_SHIFT 9 -#else -#define SHM_ID_SHIFT 7 -#endif -#define _SHM_ID_BITS 7 -#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1) - -#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS) -#define _SHM_IDX_BITS 15 -#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1) - -#endif /* _M68K_SHM_H */ diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h deleted file mode 100644 index 851d3d784b53ba92206e6a1d5ad2a46d9293b49b..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_SIGINFO_H -#define _M68K_SIGINFO_H - -#include - -#endif diff --git a/arch/m68k/include/asm/statfs.h b/arch/m68k/include/asm/statfs.h deleted file mode 100644 index 08d93f14e06177375c8992697130dbdac49cc2c3..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_STATFS_H -#define _M68K_STATFS_H - -#include - -#endif /* _M68K_STATFS_H */ diff --git a/arch/m68k/include/asm/topology.h b/arch/m68k/include/asm/topology.h deleted file mode 100644 index ca173e9f26ff8bbc852ae17377c53a3fb6f247d7..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_TOPOLOGY_H -#define _ASM_M68K_TOPOLOGY_H - -#include - -#endif /* _ASM_M68K_TOPOLOGY_H */ diff --git a/arch/m68k/include/asm/types.h b/arch/m68k/include/asm/types.h deleted file mode 100644 index 89705adcbd522b8e0429554822cf6315f0c9a4e8..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/types.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _M68K_TYPES_H -#define _M68K_TYPES_H - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ -#include - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#endif /* __KERNEL__ */ - -#endif /* _M68K_TYPES_H */ diff --git a/arch/m68k/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned.h index f4043ae63db1292889957f28cee8d4375d5719e3..2b3ca0bf7a0df900b6442a9611e9da857020c0dc 100644 --- a/arch/m68k/include/asm/unaligned.h +++ b/arch/m68k/include/asm/unaligned.h @@ -2,7 +2,7 @@ #define _ASM_M68K_UNALIGNED_H -#if defined(CONFIG_COLDFIRE) || defined(CONFIG_M68000) +#ifdef CONFIG_CPU_HAS_NO_UNALIGNED #include #include #include @@ -12,7 +12,7 @@ #else /* - * The m68k can do unaligned accesses itself. + * The m68k can do unaligned accesses itself. */ #include #include diff --git a/arch/m68k/include/asm/xor.h b/arch/m68k/include/asm/xor.h deleted file mode 100644 index c82eb12a5b1810e059e72db19b124e0078a3cbce..0000000000000000000000000000000000000000 --- a/arch/m68k/include/asm/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 7dc186b7a85fb27a098858a4106ac64d95abc1b4..71fb29938dba260b6e5895c3d7eb5f10f2afbb16 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -218,13 +218,10 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n"); #endif - pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " - "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, - (int) &_sdata, (int) &_edata, - (int) &_sbss, (int) &_ebss); - pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ", - (int) &_ebss, (int) memory_start, - (int) memory_start, (int) memory_end); + pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n", + _stext, _etext, _sdata, _edata, __bss_start, __bss_stop); + pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ", + __bss_stop, memory_start, memory_start, memory_end); /* Keep a copy of command line */ *cmdline_p = &command_line[0]; diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c index 8623f8dc16f8a03c9da88910537ae93fc47bc510..9a5932ec368946bf808c5faf527cbf39731b5540 100644 --- a/arch/m68k/kernel/sys_m68k.c +++ b/arch/m68k/kernel/sys_m68k.c @@ -479,9 +479,13 @@ sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, goto bad_access; } - mem_value = *mem; + /* + * No need to check for EFAULT; we know that the page is + * present and writable. + */ + __get_user(mem_value, mem); if (mem_value == oldval) - *mem = newval; + __put_user(newval, mem); pte_unmap_unlock(pte, ptl); up_read(&mm->mmap_sem); diff --git a/arch/m68k/kernel/vmlinux-nommu.lds b/arch/m68k/kernel/vmlinux-nommu.lds index 40e02d9c38b4df4bac25bf659d44885dd99f9fa8..06a763f49fd34643d5330221a48011be00889b0e 100644 --- a/arch/m68k/kernel/vmlinux-nommu.lds +++ b/arch/m68k/kernel/vmlinux-nommu.lds @@ -78,9 +78,7 @@ SECTIONS { __init_end = .; } - _sbss = .; BSS_SECTION(0, 0, 0) - _ebss = .; _end = .; diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index 63407c836826842a9dc2648c84fb3c50ba5c4f79..d0993594f558b3408317aede57c634c407ea580f 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -31,9 +31,7 @@ SECTIONS RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE) - _sbss = .; BSS_SECTION(0, 0, 0) - _ebss = .; _edata = .; /* End of data section */ diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index ad0f46d64c0b66a8d6b6cf4f82ffeaeeabbda084..8080469ee6c11c3e86ab59febaa4773790a2ffc7 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -44,9 +44,7 @@ __init_begin = .; . = ALIGN(PAGE_SIZE); __init_end = .; - _sbss = .; BSS_SECTION(0, 0, 0) - _ebss = .; _end = . ; diff --git a/arch/m68k/lib/muldi3.c b/arch/m68k/lib/muldi3.c index 79e928a525d078169e0617270e1fcea9da08b5f2..ee5f0b1b5c5dd9b86c78552f42e4e7e9210a74cb 100644 --- a/arch/m68k/lib/muldi3.c +++ b/arch/m68k/lib/muldi3.c @@ -19,7 +19,7 @@ along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) +#ifdef CONFIG_CPU_HAS_NO_MULDIV64 #define SI_TYPE_SIZE 32 #define __BITS4 (SI_TYPE_SIZE / 4) diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init_mm.c index f77f258dce3aca67fbfbc2e02ba33718c918903f..282f9de68966ee20409af3e4d2244af716323ca8 100644 --- a/arch/m68k/mm/init_mm.c +++ b/arch/m68k/mm/init_mm.c @@ -104,7 +104,7 @@ void __init print_memmap(void) MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_stext, _etext), MLK_ROUNDUP(_sdata, _edata), - MLK_ROUNDUP(_sbss, _ebss)); + MLK_ROUNDUP(__bss_start, __bss_stop)); } void __init mem_init(void) diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c index 345ec0d83e3d4ab825ff89afd0f4b022f0c67246..688e3664aea072ef2e2ee951b9991db2ab7abb78 100644 --- a/arch/m68k/mm/init_no.c +++ b/arch/m68k/mm/init_no.c @@ -91,7 +91,7 @@ void __init mem_init(void) totalram_pages = free_all_bootmem(); codek = (_etext - _stext) >> 10; - datak = (_ebss - _sdata) >> 10; + datak = (__bss_stop - _sdata) >> 10; initk = (__init_begin - __init_end) >> 10; tmp = nr_free_pages() << PAGE_SHIFT; diff --git a/arch/m68k/platform/68328/head-de2.S b/arch/m68k/platform/68328/head-de2.S index f632fdcb93e913b218b7e5a7743d089ac0f8172f..537d3245b539a9c7006dfc7abc03b1f9f4f5ff04 100644 --- a/arch/m68k/platform/68328/head-de2.S +++ b/arch/m68k/platform/68328/head-de2.S @@ -60,8 +60,8 @@ _start: * Move ROM filesystem above bss :-) */ - moveal #_sbss, %a0 /* romfs at the start of bss */ - moveal #_ebss, %a1 /* Set up destination */ + moveal #__bss_start, %a0 /* romfs at the start of bss */ + moveal #__bss_stop, %a1 /* Set up destination */ movel %a0, %a2 /* Copy of bss start */ movel 8(%a0), %d1 /* Get size of ROMFS */ @@ -84,8 +84,8 @@ _start: * Initialize BSS segment to 0 */ - lea _sbss, %a0 - lea _ebss, %a1 + lea __bss_start, %a0 + lea __bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ 2: cmpal %a0, %a1 diff --git a/arch/m68k/platform/68328/head-pilot.S b/arch/m68k/platform/68328/head-pilot.S index 2ebfd642081855acb3af3e35dac9066ed886038c..45a9dad29e3d3948ba0f52dadd2d54cae7b4a31a 100644 --- a/arch/m68k/platform/68328/head-pilot.S +++ b/arch/m68k/platform/68328/head-pilot.S @@ -110,7 +110,7 @@ L0: movel #CONFIG_VECTORBASE, %d7 addl #16, %d7 moveal %d7, %a0 - moveal #_ebss, %a1 + moveal #__bss_stop, %a1 lea %a1@(512), %a2 DBG_PUTC('C') @@ -138,8 +138,8 @@ LD1: DBG_PUTC('E') - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ L1: @@ -150,7 +150,7 @@ L1: DBG_PUTC('F') /* Copy command line from end of bss to command line */ - moveal #_ebss, %a0 + moveal #__bss_stop, %a0 moveal #command_line, %a1 lea %a1@(512), %a2 @@ -165,7 +165,7 @@ L3: movel #_sdata, %d0 movel %d0, _rambase - movel #_ebss, %d0 + movel #__bss_stop, %d0 movel %d0, _ramstart movel %a4, %d0 diff --git a/arch/m68k/platform/68328/head-ram.S b/arch/m68k/platform/68328/head-ram.S index 7f1aeeacb219a7525f3b142f4e27fefa5cb99ba5..5189ef9260986c31e0baaafec7ba770846ae118f 100644 --- a/arch/m68k/platform/68328/head-ram.S +++ b/arch/m68k/platform/68328/head-ram.S @@ -76,8 +76,8 @@ pclp3: beq pclp3 #endif /* DEBUG */ moveal #0x007ffff0, %ssp - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 >= %a1 */ L1: diff --git a/arch/m68k/platform/68328/head-rom.S b/arch/m68k/platform/68328/head-rom.S index a5ff96d0295f069e28ded27ace22a5d1296e6cff..3dff98ba2e97df254743af9eebb5b297d539e548 100644 --- a/arch/m68k/platform/68328/head-rom.S +++ b/arch/m68k/platform/68328/head-rom.S @@ -59,8 +59,8 @@ _stext: movew #0x2700,%sr cmpal %a1, %a2 bhi 1b - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ 1: @@ -70,7 +70,7 @@ _stext: movew #0x2700,%sr movel #_sdata, %d0 movel %d0, _rambase - movel #_ebss, %d0 + movel #__bss_stop, %d0 movel %d0, _ramstart movel #RAMEND-CONFIG_MEMORY_RESERVE*0x100000, %d0 movel %d0, _ramend diff --git a/arch/m68k/platform/68360/head-ram.S b/arch/m68k/platform/68360/head-ram.S index 8eb94fb6b971a3c35867f558096af9a6f7cd6b0e..acd213170d80fe6ae1e74cddd2fcbd90c7b65115 100644 --- a/arch/m68k/platform/68360/head-ram.S +++ b/arch/m68k/platform/68360/head-ram.S @@ -219,8 +219,8 @@ LD1: cmp.l #_edata, %a1 blt LD1 - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ L1: @@ -234,7 +234,7 @@ load_quicc: store_ram_size: /* Set ram size information */ move.l #_sdata, _rambase - move.l #_ebss, _ramstart + move.l #__bss_stop, _ramstart move.l #RAMEND, %d0 sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ move.l %d0, _ramend /* Different from RAMEND.*/ diff --git a/arch/m68k/platform/68360/head-rom.S b/arch/m68k/platform/68360/head-rom.S index 97510e55b802a587ad547c9f36005540ae2c8fc5..dfc756d998861823e48ac2b87a291ea7d04cbbb2 100644 --- a/arch/m68k/platform/68360/head-rom.S +++ b/arch/m68k/platform/68360/head-rom.S @@ -13,7 +13,7 @@ */ .global _stext -.global _sbss +.global __bss_start .global _start .global _rambase @@ -229,8 +229,8 @@ LD1: cmp.l #_edata, %a1 blt LD1 - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ L1: @@ -244,7 +244,7 @@ load_quicc: store_ram_size: /* Set ram size information */ move.l #_sdata, _rambase - move.l #_ebss, _ramstart + move.l #__bss_stop, _ramstart move.l #RAMEND, %d0 sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ move.l %d0, _ramend /* Different from RAMEND.*/ diff --git a/arch/m68k/platform/coldfire/clk.c b/arch/m68k/platform/coldfire/clk.c index 75f9ee967ea71cc696c3ed9cc5efb390b4ed209a..9cd13b4ce42ba9eb4367be63010802a632577629 100644 --- a/arch/m68k/platform/coldfire/clk.c +++ b/arch/m68k/platform/coldfire/clk.c @@ -146,9 +146,3 @@ struct clk_ops clk_ops1 = { }; #endif /* MCFPM_PPMCR1 */ #endif /* MCFPM_PPMCR0 */ - -struct clk *devm_clk_get(struct device *dev, const char *id) -{ - return NULL; -} -EXPORT_SYMBOL(devm_clk_get); diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S index 4e0c9eb3bd1f437df4d8c469f58070b3558e8f5a..b88f5716f357b7acecc2e38a2f1bed8676ced43e 100644 --- a/arch/m68k/platform/coldfire/head.S +++ b/arch/m68k/platform/coldfire/head.S @@ -230,8 +230,8 @@ _vstart: /* * Move ROM filesystem above bss :-) */ - lea _sbss,%a0 /* get start of bss */ - lea _ebss,%a1 /* set up destination */ + lea __bss_start,%a0 /* get start of bss */ + lea __bss_stop,%a1 /* set up destination */ movel %a0,%a2 /* copy of bss start */ movel 8(%a0),%d0 /* get size of ROMFS */ @@ -249,7 +249,7 @@ _copy_romfs: bne _copy_romfs #else /* CONFIG_ROMFS_FS */ - lea _ebss,%a1 + lea __bss_stop,%a1 movel %a1,_ramstart #endif /* CONFIG_ROMFS_FS */ @@ -257,8 +257,8 @@ _copy_romfs: /* * Zero out the bss region. */ - lea _sbss,%a0 /* get start of bss */ - lea _ebss,%a1 /* get end of bss */ + lea __bss_start,%a0 /* get start of bss */ + lea __bss_stop,%a1 /* get end of bss */ clrl %d0 /* set value */ _clear_bss: movel %d0,(%a0)+ /* clear each word */ diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c index d8e6349336b4f54e9f03d26ebfc095821f1da30a..eeba067d565f4470937da6a40a61dcaf8caaae18 100644 --- a/arch/m68k/sun3/prom/init.c +++ b/arch/m68k/sun3/prom/init.c @@ -22,57 +22,13 @@ int prom_root_node; struct linux_nodeops *prom_nodeops; /* You must call prom_init() before you attempt to use any of the - * routines in the prom library. It returns 0 on success, 1 on - * failure. It gets passed the pointer to the PROM vector. + * routines in the prom library. + * It gets passed the pointer to the PROM vector. */ -extern void prom_meminit(void); -extern void prom_ranges_init(void); - void __init prom_init(struct linux_romvec *rp) { romvec = rp; -#ifndef CONFIG_SUN3 - switch(romvec->pv_romvers) { - case 0: - prom_vers = PROM_V0; - break; - case 2: - prom_vers = PROM_V2; - break; - case 3: - prom_vers = PROM_V3; - break; - case 4: - prom_vers = PROM_P1275; - prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n"); - prom_halt(); - break; - default: - prom_printf("PROMLIB: Bad PROM version %d\n", - romvec->pv_romvers); - prom_halt(); - break; - }; - - prom_rev = romvec->pv_plugin_revision; - prom_prev = romvec->pv_printrev; - prom_nodeops = romvec->pv_nodeops; - - prom_root_node = prom_getsibling(0); - if((prom_root_node == 0) || (prom_root_node == -1)) - prom_halt(); - - if((((unsigned long) prom_nodeops) == 0) || - (((unsigned long) prom_nodeops) == -1)) - prom_halt(); - - prom_meminit(); - - prom_ranges_init(); -#endif -// printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n", -// romvec->pv_romvers, prom_rev); /* Initialization successful. */ return; diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h index 4487e150b4555d2815417551cbdafc200234bb5a..c07ed5d2a82034f11cbadc6e836d4e31761d380f 100644 --- a/arch/microblaze/include/asm/sections.h +++ b/arch/microblaze/include/asm/sections.h @@ -18,10 +18,6 @@ extern char _ssbss[], _esbss[]; extern unsigned long __ivt_start[], __ivt_end[]; extern char _etext[], _stext[]; -# ifdef CONFIG_MTD_UCLINUX -extern char *_ebss; -# endif - extern u32 _fdt_start[], _fdt_end[]; # endif /* !__ASSEMBLY__ */ diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c index bb4907c828dcb4c64ba4f3f291af06046c86c8a7..2b25bcf05c0022e44bdd46eff061f0782b309c7d 100644 --- a/arch/microblaze/kernel/microblaze_ksyms.c +++ b/arch/microblaze/kernel/microblaze_ksyms.c @@ -21,9 +21,6 @@ #include #include -extern char *_ebss; -EXPORT_SYMBOL_GPL(_ebss); - #ifdef CONFIG_FUNCTION_TRACER extern void _mcount(void); EXPORT_SYMBOL(_mcount); diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 16d8dfd9094b1a0df25eaa48799576449a8b234b..4da971d4392f6fc79c4fa2040c87cd0c224c46fc 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -121,7 +121,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, /* Move ROMFS out of BSS before clearing it */ if (romfs_size > 0) { - memmove(&_ebss, (int *)romfs_base, romfs_size); + memmove(&__bss_stop, (int *)romfs_base, romfs_size); klimit += romfs_size; } #endif @@ -165,7 +165,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, BUG_ON(romfs_size < 0); /* What else can we do? */ printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", - romfs_size, romfs_base, (unsigned)&_ebss); + romfs_size, romfs_base, (unsigned)&__bss_stop); printk("New klimit: 0x%08x\n", (unsigned)klimit); #endif diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 109e9d86ade4e46051f25c1d375eac1cd9f83224..936d01a689d74157f3a63e53eff1de725fa67f9d 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -131,7 +131,6 @@ SECTIONS { *(COMMON) . = ALIGN (4) ; __bss_stop = . ; - _ebss = . ; } . = ALIGN(PAGE_SIZE); _end = .; diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e3efc06e6409bd425bbd9686b0dc6698b65536a5..faf65286574e9f28d32d9cf31e1c097afcfc7acb 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -77,6 +77,7 @@ config AR7 select SYS_SUPPORTS_ZBOOT_UART16550 select ARCH_REQUIRE_GPIOLIB select VLYNQ + select HAVE_CLK help Support for the Texas Instruments AR7 System-on-a-Chip family: TNETD7100, 7200 and 7300. @@ -88,6 +89,7 @@ config ATH79 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT + select HAVE_CLK select IRQ_CPU select MIPS_MACHINE select SYS_HAS_CPU_MIPS32_R2 @@ -124,6 +126,7 @@ config BCM63XX select SYS_HAS_EARLY_PRINTK select SWAP_IO_SPACE select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK help Support for BCM63XX based boards diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c index 99969484c475c7fc7366d12fa50efd495656a9b9..a124c251c0c92a2bbbcc8f86ab2674aa5a8ad6a4 100644 --- a/arch/mips/alchemy/board-mtx1.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -228,6 +228,8 @@ static int mtx1_pci_idsel(unsigned int devsel, int assert) * adapter on the mtx-1 "singleboard" variant. It triggers a custom * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. */ + udelay(1); + if (assert && devsel != 0) /* Suppress signal to Cardbus */ alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c index 36e9570e7bc4a250fbbc05c6312c5b2bf53adcb5..b2a2311ec85b492d1dbbbd22df5a57db0ba978c4 100644 --- a/arch/mips/ath79/dev-usb.c +++ b/arch/mips/ath79/dev-usb.c @@ -145,6 +145,8 @@ static void __init ar7240_usb_setup(void) ath79_ohci_resources[0].start = AR7240_OHCI_BASE; ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1; + ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB; + ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB; platform_device_register(&ath79_ohci_device); } diff --git a/arch/mips/ath79/gpio.c b/arch/mips/ath79/gpio.c index 29054f211832505d371930d3e13f752af56f69f3..48fe762d2526885908c192545dbc70fa69d4cb9c 100644 --- a/arch/mips/ath79/gpio.c +++ b/arch/mips/ath79/gpio.c @@ -188,8 +188,10 @@ void __init ath79_gpio_init(void) if (soc_is_ar71xx()) ath79_gpio_count = AR71XX_GPIO_COUNT; - else if (soc_is_ar724x()) - ath79_gpio_count = AR724X_GPIO_COUNT; + else if (soc_is_ar7240()) + ath79_gpio_count = AR7240_GPIO_COUNT; + else if (soc_is_ar7241() || soc_is_ar7242()) + ath79_gpio_count = AR7241_GPIO_COUNT; else if (soc_is_ar913x()) ath79_gpio_count = AR913X_GPIO_COUNT; else if (soc_is_ar933x()) diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c index e39f73048d4f653c48ba3b52a31976f290699bae..f1c9c3e2f678146e83772f3c7cb05a0989743fce 100644 --- a/arch/mips/bcm63xx/dev-spi.c +++ b/arch/mips/bcm63xx/dev-spi.c @@ -106,11 +106,15 @@ int __init bcm63xx_spi_register(void) if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH; } if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) { spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6358_MSG_CTL_WIDTH; } bcm63xx_spi_regs_init(); diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 7fb1f222b8a538b9b000e99375899f37a0c069a9..274cd4fad30c4810f29a420e2dc1e4b139adba73 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -61,6 +61,12 @@ static void octeon_irq_set_ciu_mapping(int irq, int line, int bit, octeon_irq_ciu_to_irq[line][bit] = irq; } +static void octeon_irq_force_ciu_mapping(struct irq_domain *domain, + int irq, int line, int bit) +{ + irq_domain_associate(domain, irq, line << 6 | bit); +} + static int octeon_coreid_for_cpu(int cpu) { #ifdef CONFIG_SMP @@ -183,19 +189,9 @@ static void __init octeon_irq_init_core(void) mutex_init(&cd->core_irq_mutex); irq = OCTEON_IRQ_SW0 + i; - switch (irq) { - case OCTEON_IRQ_TIMER: - case OCTEON_IRQ_SW0: - case OCTEON_IRQ_SW1: - case OCTEON_IRQ_5: - case OCTEON_IRQ_PERF: - irq_set_chip_data(irq, cd); - irq_set_chip_and_handler(irq, &octeon_irq_chip_core, - handle_percpu_irq); - break; - default: - break; - } + irq_set_chip_data(irq, cd); + irq_set_chip_and_handler(irq, &octeon_irq_chip_core, + handle_percpu_irq); } } @@ -890,7 +886,6 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d, unsigned int type; unsigned int pin; unsigned int trigger; - struct octeon_irq_gpio_domain_data *gpiod; if (d->of_node != node) return -EINVAL; @@ -925,8 +920,7 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d, break; } *out_type = type; - gpiod = d->host_data; - *out_hwirq = gpiod->base_hwirq + pin; + *out_hwirq = pin; return 0; } @@ -996,19 +990,21 @@ static int octeon_irq_ciu_map(struct irq_domain *d, static int octeon_irq_gpio_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw) { - unsigned int line = hw >> 6; - unsigned int bit = hw & 63; + struct octeon_irq_gpio_domain_data *gpiod = d->host_data; + unsigned int line, bit; if (!octeon_irq_virq_in_range(virq)) return -EINVAL; + hw += gpiod->base_hwirq; + line = hw >> 6; + bit = hw & 63; if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0) return -EINVAL; octeon_irq_set_ciu_mapping(virq, line, bit, octeon_irq_gpio_chip, octeon_irq_handle_gpio); - return 0; } @@ -1149,6 +1145,7 @@ static void __init octeon_irq_init_ciu(void) struct irq_chip *chip_wd; struct device_node *gpio_node; struct device_node *ciu_node; + struct irq_domain *ciu_domain = NULL; octeon_irq_init_ciu_percpu(); octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu; @@ -1177,31 +1174,6 @@ static void __init octeon_irq_init_ciu(void) /* Mips internal */ octeon_irq_init_core(); - /* CIU_0 */ - for (i = 0; i < 16; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WORKQ0, 0, i + 0, chip, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); - - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_INT0, 0, i + 36, chip, handle_level_irq); - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_MSI0, 0, i + 40, chip, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_RML, 0, 46, chip, handle_level_irq); - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_TIMER0, 0, i + 52, chip, handle_edge_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB0, 0, 56, chip, handle_level_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_BOOTDMA, 0, 63, chip, handle_level_irq); - - /* CIU_1 */ - for (i = 0; i < 16; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq); - gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio"); if (gpio_node) { struct octeon_irq_gpio_domain_data *gpiod; @@ -1219,10 +1191,35 @@ static void __init octeon_irq_init_ciu(void) ciu_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-ciu"); if (ciu_node) { - irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL); + ciu_domain = irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL); of_node_put(ciu_node); } else - pr_warn("Cannot find device node for cavium,octeon-3860-ciu.\n"); + panic("Cannot find device node for cavium,octeon-3860-ciu."); + + /* CIU_0 */ + for (i = 0; i < 16; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_WORKQ0, 0, i + 0); + + octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); + octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); + + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_INT0, 0, i + 36); + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 0, i + 40); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_RML, 0, 46); + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB0, 0, 56); + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_BOOTDMA, 0, 63); + + /* CIU_1 */ + for (i = 0; i < 16; i++) + octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB1, 1, 17); /* Enable the CIU lines */ set_c0_status(STATUSF_IP3 | STATUSF_IP2); diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h index 83894aa7932cbd13c22f39c76bf3f040de1979f7..c9456e7a7283dfa15b507f021bb3f8f6696a45ca 100644 --- a/arch/mips/include/asm/clock.h +++ b/arch/mips/include/asm/clock.h @@ -50,15 +50,4 @@ void clk_recalc_rate(struct clk *); int clk_register(struct clk *); void clk_unregister(struct clk *); -/* the exported API, in addition to clk_set_rate */ -/** - * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter - * @clk: clock source - * @rate: desired clock rate in Hz - * @algo_id: algorithm id to be passed down to ops->set_rate - * - * Returns success (0) or negative errno. - */ -int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id); - #endif /* __ASM_MIPS_CLOCK_H */ diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h index 1caa78ad06d5833306ee367cd44fbefe5dbd6fe3..dde504477fac1521e95f2fe60b75c7ac2fd8e5aa 100644 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h @@ -393,7 +393,8 @@ #define AR71XX_GPIO_REG_FUNC 0x28 #define AR71XX_GPIO_COUNT 16 -#define AR724X_GPIO_COUNT 18 +#define AR7240_GPIO_COUNT 18 +#define AR7241_GPIO_COUNT 20 #define AR913X_GPIO_COUNT 22 #define AR933X_GPIO_COUNT 30 #define AR934X_GPIO_COUNT 23 diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h index 4476fa03bf36d5eee19b26e1443b697eb4c33502..6ddae926bf79717b95a709d71c40a99a888a310a 100644 --- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h @@ -42,7 +42,6 @@ #define cpu_has_mips64r1 0 #define cpu_has_mips64r2 0 -#define cpu_has_dsp 0 #define cpu_has_mipsmt 0 #define cpu_has_64bits 0 diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h index 7d98dbe5d4b5ef9de38b25717747436e08e6179e..c9bae1362606aac10d79c921f3c8b7374cfc1ba5 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h @@ -9,6 +9,8 @@ int __init bcm63xx_spi_register(void); struct bcm63xx_spi_pdata { unsigned int fifo_size; + unsigned int msg_type_shift; + unsigned int msg_ctl_width; int bus_num; int num_chipselect; u32 speed_hz; diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 4ccc2a748aff2db6913dab0e8b67e1eb6fbceeb8..61f2a2a5099d02ad281290c675604a4e897e9bf9 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -1054,7 +1054,8 @@ #define SPI_6338_FILL_BYTE 0x07 #define SPI_6338_MSG_TAIL 0x09 #define SPI_6338_RX_TAIL 0x0b -#define SPI_6338_MSG_CTL 0x40 +#define SPI_6338_MSG_CTL 0x40 /* 8-bits register */ +#define SPI_6338_MSG_CTL_WIDTH 8 #define SPI_6338_MSG_DATA 0x41 #define SPI_6338_MSG_DATA_SIZE 0x3f #define SPI_6338_RX_DATA 0x80 @@ -1070,7 +1071,8 @@ #define SPI_6348_FILL_BYTE 0x07 #define SPI_6348_MSG_TAIL 0x09 #define SPI_6348_RX_TAIL 0x0b -#define SPI_6348_MSG_CTL 0x40 +#define SPI_6348_MSG_CTL 0x40 /* 8-bits register */ +#define SPI_6348_MSG_CTL_WIDTH 8 #define SPI_6348_MSG_DATA 0x41 #define SPI_6348_MSG_DATA_SIZE 0x3f #define SPI_6348_RX_DATA 0x80 @@ -1078,6 +1080,7 @@ /* BCM 6358 SPI core */ #define SPI_6358_MSG_CTL 0x00 /* 16-bits register */ +#define SPI_6358_MSG_CTL_WIDTH 16 #define SPI_6358_MSG_DATA 0x02 #define SPI_6358_MSG_DATA_SIZE 0x21e #define SPI_6358_RX_DATA 0x400 @@ -1094,6 +1097,7 @@ /* BCM 6358 SPI core */ #define SPI_6368_MSG_CTL 0x00 /* 16-bits register */ +#define SPI_6368_MSG_CTL_WIDTH 16 #define SPI_6368_MSG_DATA 0x02 #define SPI_6368_MSG_DATA_SIZE 0x21e #define SPI_6368_RX_DATA 0x400 @@ -1115,7 +1119,10 @@ #define SPI_HD_W 0x01 #define SPI_HD_R 0x02 #define SPI_BYTE_CNT_SHIFT 0 -#define SPI_MSG_TYPE_SHIFT 14 +#define SPI_6338_MSG_TYPE_SHIFT 6 +#define SPI_6348_MSG_TYPE_SHIFT 6 +#define SPI_6358_MSG_TYPE_SHIFT 14 +#define SPI_6368_MSG_TYPE_SHIFT 14 /* Command */ #define SPI_CMD_NOOP 0x00 diff --git a/arch/mips/include/asm/mach-cavium-octeon/irq.h b/arch/mips/include/asm/mach-cavium-octeon/irq.h index 418992042f6fcbc23f1612a82ee886cd969c5fa5..c22a3078bf11b69f2da21547fc1c337da7b51206 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/irq.h +++ b/arch/mips/include/asm/mach-cavium-octeon/irq.h @@ -21,14 +21,10 @@ enum octeon_irq { OCTEON_IRQ_TIMER, /* sources in CIU_INTX_EN0 */ OCTEON_IRQ_WORKQ0, - OCTEON_IRQ_GPIO0 = OCTEON_IRQ_WORKQ0 + 16, - OCTEON_IRQ_WDOG0 = OCTEON_IRQ_GPIO0 + 16, + OCTEON_IRQ_WDOG0 = OCTEON_IRQ_WORKQ0 + 16, OCTEON_IRQ_WDOG15 = OCTEON_IRQ_WDOG0 + 15, OCTEON_IRQ_MBOX0 = OCTEON_IRQ_WDOG0 + 16, OCTEON_IRQ_MBOX1, - OCTEON_IRQ_UART0, - OCTEON_IRQ_UART1, - OCTEON_IRQ_UART2, OCTEON_IRQ_PCI_INT0, OCTEON_IRQ_PCI_INT1, OCTEON_IRQ_PCI_INT2, @@ -38,8 +34,6 @@ enum octeon_irq { OCTEON_IRQ_PCI_MSI2, OCTEON_IRQ_PCI_MSI3, - OCTEON_IRQ_TWSI, - OCTEON_IRQ_TWSI2, OCTEON_IRQ_RML, OCTEON_IRQ_TIMER0, OCTEON_IRQ_TIMER1, @@ -47,8 +41,6 @@ enum octeon_irq { OCTEON_IRQ_TIMER3, OCTEON_IRQ_USB0, OCTEON_IRQ_USB1, - OCTEON_IRQ_MII0, - OCTEON_IRQ_MII1, OCTEON_IRQ_BOOTDMA, #ifndef CONFIG_PCI_MSI OCTEON_IRQ_LAST = 127 diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index 06367c37e1b2dd2c04154143a17b9c07e1ae6e30..5222a007bc212a55746f9155605a836da6763442 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -245,7 +245,6 @@ static inline void do_perfcnt_IRQ(void) #ifdef CONFIG_CPU_SUPPORTS_CPUFREQ #include -extern void loongson2_cpu_wait(void); extern struct cpufreq_frequency_table loongson2_clockmod_table[]; /* Chip Config */ diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index 7531ecd654d651df630d1d520e71f762c47547e3..dca8bce8c7abbe47473920ca6d9e28eb3c235dc9 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -10,6 +10,7 @@ struct mod_arch_specific { struct list_head dbe_list; const struct exception_table_entry *dbe_start; const struct exception_table_entry *dbe_end; + struct mips_hi16 *r_mips_hi16_list; }; typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h index a37d12b3b61c0b3c2db45cc6a37f44fc4e6eac52..afe9e0e03fe96c5b7a710abe19075d9cf4a4f87b 100644 --- a/arch/mips/include/asm/r4k-timer.h +++ b/arch/mips/include/asm/r4k-timer.h @@ -12,16 +12,16 @@ #ifdef CONFIG_SYNC_R4K -extern void synchronise_count_master(void); -extern void synchronise_count_slave(void); +extern void synchronise_count_master(int cpu); +extern void synchronise_count_slave(int cpu); #else -static inline void synchronise_count_master(void) +static inline void synchronise_count_master(int cpu) { } -static inline void synchronise_count_slave(void) +static inline void synchronise_count_slave(int cpu) { } diff --git a/arch/mips/kernel/cpufreq/Makefile b/arch/mips/kernel/cpufreq/Makefile index c3479a432efe9e4dc1f86dff6cca5e020e7991c9..05a5715ee38c5b3e2f8d44cbfd3cced73a549de5 100644 --- a/arch/mips/kernel/cpufreq/Makefile +++ b/arch/mips/kernel/cpufreq/Makefile @@ -2,4 +2,4 @@ # Makefile for the Linux/MIPS cpufreq. # -obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o loongson2_clock.o +obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o diff --git a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c index ae5db206347c7fdaf59e9618ba0ee4bc0f0017a8..e7c98e2b78b647bfb312b8977bcc9b140beb1e77 100644 --- a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c +++ b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c @@ -19,7 +19,7 @@ #include -#include +#include static uint nowait; @@ -181,6 +181,25 @@ static struct platform_driver platform_driver = { .id_table = platform_device_ids, }; +/* + * This is the simple version of Loongson-2 wait, Maybe we need do this in + * interrupt disabled context. + */ + +static DEFINE_SPINLOCK(loongson2_wait_lock); + +static void loongson2_cpu_wait(void) +{ + unsigned long flags; + u32 cpu_freq; + + spin_lock_irqsave(&loongson2_wait_lock, flags); + cpu_freq = LOONGSON_CHIPCFG0; + LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */ + LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */ + spin_unlock_irqrestore(&loongson2_wait_lock, flags); +} + static int __init cpufreq_init(void) { int ret; diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index a5066b1c3de37185896fe529839c5133a158ccb0..4f8c3cba8c0c45180cdabe08ac05aa43e652395f 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -39,8 +39,6 @@ struct mips_hi16 { Elf_Addr value; }; -static struct mips_hi16 *mips_hi16_list; - static LIST_HEAD(dbe_list); static DEFINE_SPINLOCK(dbe_lock); @@ -128,8 +126,8 @@ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v) n->addr = (Elf_Addr *)location; n->value = v; - n->next = mips_hi16_list; - mips_hi16_list = n; + n->next = me->arch.r_mips_hi16_list; + me->arch.r_mips_hi16_list = n; return 0; } @@ -142,18 +140,28 @@ static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v) return 0; } +static void free_relocation_chain(struct mips_hi16 *l) +{ + struct mips_hi16 *next; + + while (l) { + next = l->next; + kfree(l); + l = next; + } +} + static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) { unsigned long insnlo = *location; + struct mips_hi16 *l; Elf_Addr val, vallo; /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; - if (mips_hi16_list != NULL) { - struct mips_hi16 *l; - - l = mips_hi16_list; + if (me->arch.r_mips_hi16_list != NULL) { + l = me->arch.r_mips_hi16_list; while (l != NULL) { struct mips_hi16 *next; unsigned long insn; @@ -188,7 +196,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) l = next; } - mips_hi16_list = NULL; + me->arch.r_mips_hi16_list = NULL; } /* @@ -201,6 +209,9 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) return 0; out_danger: + free_relocation_chain(l); + me->arch.r_mips_hi16_list = NULL; + pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name); return -ENOEXEC; @@ -273,6 +284,7 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, pr_debug("Applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); + me->arch.r_mips_hi16_list = NULL; for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { /* This is where to make the change */ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr @@ -296,6 +308,19 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, return res; } + /* + * Normally the hi16 list should be deallocated at this point. A + * malformed binary however could contain a series of R_MIPS_HI16 + * relocations not followed by a R_MIPS_LO16 relocation. In that + * case, free up the list and return an error. + */ + if (me->arch.r_mips_hi16_list) { + free_relocation_chain(me->arch.r_mips_hi16_list); + me->arch.r_mips_hi16_list = NULL; + + return -ENOEXEC; + } + return 0; } diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c index e7e03ecf54959988e029e81783422fa0c5b78554..afc379ca375301f7e916a4fd46447239ad478a38 100644 --- a/arch/mips/kernel/smp-cmp.c +++ b/arch/mips/kernel/smp-cmp.c @@ -102,7 +102,7 @@ static void cmp_init_secondary(void) c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE; #endif #ifdef CONFIG_MIPS_MT_SMTC - c->tc_id = (read_c0_tcbind() >> TCBIND_CURTC_SHIFT) & TCBIND_CURTC; + c->tc_id = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT; #endif } diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 31637d8c87381f04b02bcae714e8b2165952fc9c..9005bf9fb859552101d7e68638adc73ba4978ee7 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -130,7 +130,7 @@ asmlinkage __cpuinit void start_secondary(void) cpu_set(cpu, cpu_callin_map); - synchronise_count_slave(); + synchronise_count_slave(cpu); /* * irq will be enabled in ->smp_finish(), enabling it too early @@ -173,7 +173,6 @@ void smp_send_stop(void) void __init smp_cpus_done(unsigned int max_cpus) { mp_ops->cpus_done(); - synchronise_count_master(); } /* called from main before smp_init() */ @@ -206,6 +205,7 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle) while (!cpu_isset(cpu, cpu_callin_map)) udelay(100); + synchronise_count_master(cpu); return 0; } diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index 842d55e411fd396479b611ba0a1c0c2af2d4cb92..7f1eca3858def1845dc98dd1264206be19159b01 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -28,12 +28,11 @@ static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0); #define COUNTON 100 #define NR_LOOPS 5 -void __cpuinit synchronise_count_master(void) +void __cpuinit synchronise_count_master(int cpu) { int i; unsigned long flags; unsigned int initcount; - int nslaves; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -43,8 +42,7 @@ void __cpuinit synchronise_count_master(void) return; #endif - printk(KERN_INFO "Synchronize counters across %u CPUs: ", - num_online_cpus()); + printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu); local_irq_save(flags); @@ -52,7 +50,7 @@ void __cpuinit synchronise_count_master(void) * Notify the slaves that it's time to start */ atomic_set(&count_reference, read_c0_count()); - atomic_set(&count_start_flag, 1); + atomic_set(&count_start_flag, cpu); smp_wmb(); /* Count will be initialised to current timer for all CPU's */ @@ -69,10 +67,9 @@ void __cpuinit synchronise_count_master(void) * two CPUs. */ - nslaves = num_online_cpus()-1; for (i = 0; i < NR_LOOPS; i++) { - /* slaves loop on '!= ncpus' */ - while (atomic_read(&count_count_start) != nslaves) + /* slaves loop on '!= 2' */ + while (atomic_read(&count_count_start) != 1) mb(); atomic_set(&count_count_stop, 0); smp_wmb(); @@ -89,7 +86,7 @@ void __cpuinit synchronise_count_master(void) /* * Wait for all slaves to leave the synchronization point: */ - while (atomic_read(&count_count_stop) != nslaves) + while (atomic_read(&count_count_stop) != 1) mb(); atomic_set(&count_count_start, 0); smp_wmb(); @@ -97,6 +94,7 @@ void __cpuinit synchronise_count_master(void) } /* Arrange for an interrupt in a short while */ write_c0_compare(read_c0_count() + COUNTON); + atomic_set(&count_start_flag, 0); local_irq_restore(flags); @@ -108,11 +106,10 @@ void __cpuinit synchronise_count_master(void) printk("done.\n"); } -void __cpuinit synchronise_count_slave(void) +void __cpuinit synchronise_count_slave(int cpu) { int i; unsigned int initcount; - int ncpus; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -127,16 +124,15 @@ void __cpuinit synchronise_count_slave(void) * so we first wait for the master to say everyone is ready */ - while (!atomic_read(&count_start_flag)) + while (atomic_read(&count_start_flag) != cpu) mb(); /* Count will be initialised to next expire for all CPU's */ initcount = atomic_read(&count_reference); - ncpus = num_online_cpus(); for (i = 0; i < NR_LOOPS; i++) { atomic_inc(&count_count_start); - while (atomic_read(&count_count_start) != ncpus) + while (atomic_read(&count_count_start) != 2) mb(); /* @@ -146,7 +142,7 @@ void __cpuinit synchronise_count_slave(void) write_c0_count(initcount); atomic_inc(&count_count_stop); - while (atomic_read(&count_count_stop) != ncpus) + while (atomic_read(&count_count_stop) != 2) mb(); } /* Arrange for an interrupt in a short while */ diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c index d3bcc33f4699ae7dcf8036bf70f0a6be19293d70..ce2f129b081f8886d64968350a77b6f4f51bf45e 100644 --- a/arch/mips/lantiq/clk.c +++ b/arch/mips/lantiq/clk.c @@ -135,6 +135,11 @@ void clk_deactivate(struct clk *clk) } EXPORT_SYMBOL(clk_deactivate); +struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec) +{ + return NULL; +} + static inline u32 get_counter_resolution(void) { u32 res; diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c index d185e8477fdf2a8eb38d73ff74ed2c94acb894e8..6cfd6117fbfdc26f13e403d0241e45a5357aeaf2 100644 --- a/arch/mips/lantiq/prom.c +++ b/arch/mips/lantiq/prom.c @@ -8,7 +8,10 @@ #include #include +#include #include +#include + #include #include @@ -70,6 +73,25 @@ void __init plat_mem_setup(void) __dt_setup_arch(&__dtb_start); } +void __init device_tree_init(void) +{ + unsigned long base, size; + + if (!initial_boot_params) + return; + + base = virt_to_phys((void *)initial_boot_params); + size = be32_to_cpu(initial_boot_params->totalsize); + + /* Before we do anything, lets reserve the dt blob */ + reserve_bootmem(base, size, BOOTMEM_DEFAULT); + + unflatten_device_tree(); + + /* free the space reserved for the dt blob */ + free_bootmem(base, size); +} + void __init prom_init(void) { /* call the soc specific detetcion code and get it to fill soc_info */ diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c index 83780f7c842b8c81d0107c31d5f627ed4dd4791b..befbb760ab766aee198df2dfd2ff66d0bd1832d3 100644 --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -20,10 +20,12 @@ /* clock control register */ #define CGU_IFCCR 0x0018 +#define CGU_IFCCR_VR9 0x0024 /* system clock register */ #define CGU_SYS 0x0010 /* pci control register */ #define CGU_PCICR 0x0034 +#define CGU_PCICR_VR9 0x0038 /* ephy configuration register */ #define CGU_EPHY 0x10 /* power control register */ @@ -80,6 +82,9 @@ static void __iomem *pmu_membase; void __iomem *ltq_cgu_membase; void __iomem *ltq_ebu_membase; +static u32 ifccr = CGU_IFCCR; +static u32 pcicr = CGU_PCICR; + /* legacy function kept alive to ease clkdev transition */ void ltq_pmu_enable(unsigned int module) { @@ -103,14 +108,14 @@ EXPORT_SYMBOL(ltq_pmu_disable); /* enable a hw clock */ static int cgu_enable(struct clk *clk) { - ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | clk->bits, CGU_IFCCR); + ltq_cgu_w32(ltq_cgu_r32(ifccr) | clk->bits, ifccr); return 0; } /* disable a hw clock */ static void cgu_disable(struct clk *clk) { - ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~clk->bits, CGU_IFCCR); + ltq_cgu_w32(ltq_cgu_r32(ifccr) & ~clk->bits, ifccr); } /* enable a clock gate */ @@ -138,22 +143,22 @@ static void pmu_disable(struct clk *clk) /* the pci enable helper */ static int pci_enable(struct clk *clk) { - unsigned int ifccr = ltq_cgu_r32(CGU_IFCCR); + unsigned int val = ltq_cgu_r32(ifccr); /* set bus clock speed */ if (of_machine_is_compatible("lantiq,ar9")) { - ifccr &= ~0x1f00000; + val &= ~0x1f00000; if (clk->rate == CLOCK_33M) - ifccr |= 0xe00000; + val |= 0xe00000; else - ifccr |= 0x700000; /* 62.5M */ + val |= 0x700000; /* 62.5M */ } else { - ifccr &= ~0xf00000; + val &= ~0xf00000; if (clk->rate == CLOCK_33M) - ifccr |= 0x800000; + val |= 0x800000; else - ifccr |= 0x400000; /* 62.5M */ + val |= 0x400000; /* 62.5M */ } - ltq_cgu_w32(ifccr, CGU_IFCCR); + ltq_cgu_w32(val, ifccr); pmu_enable(clk); return 0; } @@ -161,18 +166,16 @@ static int pci_enable(struct clk *clk) /* enable the external clock as a source */ static int pci_ext_enable(struct clk *clk) { - ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~(1 << 16), - CGU_IFCCR); - ltq_cgu_w32((1 << 30), CGU_PCICR); + ltq_cgu_w32(ltq_cgu_r32(ifccr) & ~(1 << 16), ifccr); + ltq_cgu_w32((1 << 30), pcicr); return 0; } /* disable the external clock as a source */ static void pci_ext_disable(struct clk *clk) { - ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | (1 << 16), - CGU_IFCCR); - ltq_cgu_w32((1 << 31) | (1 << 30), CGU_PCICR); + ltq_cgu_w32(ltq_cgu_r32(ifccr) | (1 << 16), ifccr); + ltq_cgu_w32((1 << 31) | (1 << 30), pcicr); } /* enable a clockout source */ @@ -184,11 +187,11 @@ static int clkout_enable(struct clk *clk) for (i = 0; i < 4; i++) { if (clk->rates[i] == clk->rate) { int shift = 14 - (2 * clk->module); - unsigned int ifccr = ltq_cgu_r32(CGU_IFCCR); + unsigned int val = ltq_cgu_r32(ifccr); - ifccr &= ~(3 << shift); - ifccr |= i << shift; - ltq_cgu_w32(ifccr, CGU_IFCCR); + val &= ~(3 << shift); + val |= i << shift; + ltq_cgu_w32(val, ifccr); return 0; } } @@ -336,8 +339,12 @@ void __init ltq_soc_init(void) clkdev_add_clkout(); /* add the soc dependent clocks */ - if (!of_machine_is_compatible("lantiq,vr9")) + if (of_machine_is_compatible("lantiq,vr9")) { + ifccr = CGU_IFCCR_VR9; + pcicr = CGU_PCICR_VR9; + } else { clkdev_add_pmu("1e180000.etop", NULL, 0, PMU_PPE); + } if (!of_machine_is_compatible("lantiq,ase")) { clkdev_add_pmu("1e100c00.serial", NULL, 0, PMU_ASC1); diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index aca93eed8779b7756f32d0fb69bf0b32b9227019..263beb9322a8218a79ffef69a9aba244feab9d03 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -41,6 +41,7 @@ config LEMOTE_MACH2F select CSRC_R4K if ! MIPS_EXTERNAL_TIMER select DMA_NONCOHERENT select GENERIC_ISA_DMA_SUPPORT_BROKEN + select HAVE_CLK select HW_HAS_PCI select I8259 select IRQ_CPU diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile index 8699a53f0477ee5e14e50d76f7282415acec185e..4f9eaa328a1601a3ff63beaf14b86b65f960a469 100644 --- a/arch/mips/loongson/lemote-2f/Makefile +++ b/arch/mips/loongson/lemote-2f/Makefile @@ -2,7 +2,7 @@ # Makefile for lemote loongson2f family machines # -obj-y += machtype.o irq.o reset.o ec_kb3310b.o +obj-y += clock.o machtype.o irq.o reset.o ec_kb3310b.o # # Suspend Support diff --git a/arch/mips/kernel/cpufreq/loongson2_clock.c b/arch/mips/loongson/lemote-2f/clock.c similarity index 76% rename from arch/mips/kernel/cpufreq/loongson2_clock.c rename to arch/mips/loongson/lemote-2f/clock.c index 5426779d9fdb77700d05b897e7af3acff8d753e1..bc739d4bab2eee62c2860b777415dffc80a83f4a 100644 --- a/arch/mips/kernel/cpufreq/loongson2_clock.c +++ b/arch/mips/loongson/lemote-2f/clock.c @@ -6,14 +6,17 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ - -#include +#include #include -#include +#include +#include +#include +#include +#include +#include #include - -#include +#include static LIST_HEAD(clock_list); static DEFINE_SPINLOCK(clock_lock); @@ -88,12 +91,6 @@ void clk_put(struct clk *clk) EXPORT_SYMBOL(clk_put); int clk_set_rate(struct clk *clk, unsigned long rate) -{ - return clk_set_rate_ex(clk, rate, 0); -} -EXPORT_SYMBOL_GPL(clk_set_rate); - -int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id) { int ret = 0; int regval; @@ -103,7 +100,7 @@ int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id) unsigned long flags; spin_lock_irqsave(&clock_lock, flags); - ret = clk->ops->set_rate(clk, rate, algo_id); + ret = clk->ops->set_rate(clk, rate, 0); spin_unlock_irqrestore(&clock_lock, flags); } @@ -129,7 +126,7 @@ int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id) return ret; } -EXPORT_SYMBOL_GPL(clk_set_rate_ex); +EXPORT_SYMBOL_GPL(clk_set_rate); long clk_round_rate(struct clk *clk, unsigned long rate) { @@ -146,26 +143,3 @@ long clk_round_rate(struct clk *clk, unsigned long rate) return rate; } EXPORT_SYMBOL_GPL(clk_round_rate); - -/* - * This is the simple version of Loongson-2 wait, Maybe we need do this in - * interrupt disabled content - */ - -DEFINE_SPINLOCK(loongson2_wait_lock); -void loongson2_cpu_wait(void) -{ - u32 cpu_freq; - unsigned long flags; - - spin_lock_irqsave(&loongson2_wait_lock, flags); - cpu_freq = LOONGSON_CHIPCFG0; - LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */ - LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */ - spin_unlock_irqrestore(&loongson2_wait_lock, flags); -} -EXPORT_SYMBOL_GPL(loongson2_cpu_wait); - -MODULE_AUTHOR("Yanhua "); -MODULE_DESCRIPTION("cpufreq driver for Loongson 2F"); -MODULE_LICENSE("GPL"); diff --git a/arch/mips/loongson1/Kconfig b/arch/mips/loongson1/Kconfig index 237fa214de9f64bc09211a6797a3065bd3f87b85..a9a14d6e81af6c38b9d4510d11b2030d586fa286 100644 --- a/arch/mips/loongson1/Kconfig +++ b/arch/mips/loongson1/Kconfig @@ -15,6 +15,7 @@ config LOONGSON1_LS1B select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_HIGHMEM select SYS_HAS_EARLY_PRINTK + select HAVE_CLK endchoice diff --git a/arch/mips/loongson1/common/clock.c b/arch/mips/loongson1/common/clock.c index 2d98fb030596dd1bc091cb54c91b1073c0cdc3fb..1bbbbec12085eb5c4264e6cf70d4dc6fbf11437b 100644 --- a/arch/mips/loongson1/common/clock.c +++ b/arch/mips/loongson1/common/clock.c @@ -38,12 +38,28 @@ struct clk *clk_get(struct device *dev, const char *name) } EXPORT_SYMBOL(clk_get); +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + unsigned long clk_get_rate(struct clk *clk) { return clk->rate; } EXPORT_SYMBOL(clk_get_rate); +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + static void pll_clk_init(struct clk *clk) { u32 pll; diff --git a/arch/mips/mm/gup.c b/arch/mips/mm/gup.c index 33aadbcf170bb4428020ddb87a17383180719400..dcfd573871c142348c4fa790bfcbd3dcc0c50879 100644 --- a/arch/mips/mm/gup.c +++ b/arch/mips/mm/gup.c @@ -152,6 +152,8 @@ static int gup_huge_pud(pud_t pud, unsigned long addr, unsigned long end, do { VM_BUG_ON(compound_head(page) != head); pages[*nr] = page; + if (PageTail(page)) + get_huge_page_tail(page); (*nr)++; page++; refs++; diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 7b13a4caeea41b6377fb9410fe1397f2dce6aef2..fea823f184794a8a9003ce79afd90cb762a4ed52 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -273,16 +273,19 @@ asmlinkage void plat_irq_dispatch(void) unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; int irq; + if (unlikely(!pending)) { + spurious_interrupt(); + return; + } + irq = irq_ffs(pending); if (irq == MIPSCPU_INT_I8259A) malta_hw0_irqdispatch(); else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()])) malta_ipi_irqdispatch(); - else if (irq >= 0) - do_IRQ(MIPS_CPU_IRQ_BASE + irq); else - spurious_interrupt(); + do_IRQ(MIPS_CPU_IRQ_BASE + irq); } #ifdef CONFIG_MIPS_MT_SMP diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index 284dea54faf5a9f629e9d2cab18121cc5db328c6..2147cb34e705a2dca85355aa529c03ca878744a6 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -252,16 +252,3 @@ void __init mips_pcibios_init(void) register_pci_controller(controller); } - -/* Enable PCI 2.1 compatibility in PIIX4 */ -static void __devinit quirk_dlcsetup(struct pci_dev *dev) -{ - u8 odlc, ndlc; - (void) pci_read_config_byte(dev, 0x82, &odlc); - /* Enable passive releases and delayed transaction */ - ndlc = odlc | 7; - (void) pci_write_config_byte(dev, 0x82, ndlc); -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, - quirk_dlcsetup); diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c index 4c35301720e76c04aad4eade1d88310c107ba6fd..80562b81f0f2a2036fbf0a28781601b420c5d872 100644 --- a/arch/mips/mti-malta/malta-platform.c +++ b/arch/mips/mti-malta/malta-platform.c @@ -138,11 +138,6 @@ static int __init malta_add_devices(void) if (err) return err; - /* - * Set RTC to BCD mode to support current alarm code. - */ - CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL); - return 0; } diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c index 414a7459858d4e06b837a08d375eccbc96804dae..86d77a666458bae80c60f94c9fc405dca5f8459c 100644 --- a/arch/mips/pci/pci-ar724x.c +++ b/arch/mips/pci/pci-ar724x.c @@ -23,9 +23,12 @@ #define AR724X_PCI_MEM_BASE 0x10000000 #define AR724X_PCI_MEM_SIZE 0x08000000 +#define AR724X_PCI_REG_RESET 0x18 #define AR724X_PCI_REG_INT_STATUS 0x4c #define AR724X_PCI_REG_INT_MASK 0x50 +#define AR724X_PCI_RESET_LINK_UP BIT(0) + #define AR724X_PCI_INT_DEV0 BIT(14) #define AR724X_PCI_IRQ_COUNT 1 @@ -38,6 +41,15 @@ static void __iomem *ar724x_pci_ctrl_base; static u32 ar724x_pci_bar0_value; static bool ar724x_pci_bar0_is_cached; +static bool ar724x_pci_link_up; + +static inline bool ar724x_pci_check_link(void) +{ + u32 reset; + + reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET); + return reset & AR724X_PCI_RESET_LINK_UP; +} static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, uint32_t *value) @@ -46,6 +58,9 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, void __iomem *base; u32 data; + if (!ar724x_pci_link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; @@ -96,6 +111,9 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, u32 data; int s; + if (!ar724x_pci_link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; @@ -280,6 +298,10 @@ int __init ar724x_pcibios_init(int irq) if (ar724x_pci_ctrl_base == NULL) goto err_unmap_devcfg; + ar724x_pci_link_up = ar724x_pci_check_link(); + if (!ar724x_pci_link_up) + pr_warn("ar724x: PCIe link is down\n"); + ar724x_pci_irq_init(irq); register_pci_controller(&ar724x_pci_controller); diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index b105eca3c02042d2e9319bffce8b7dee68ad6b4c..cd8fcab6b054e7f6c7293b5c10cd503fc85aab45 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -401,6 +401,7 @@ static void __init node_mem_init(cnodeid_t node) * Allocate the node data structures on the node first. */ __node_data[node] = __va(slot_freepfn << PAGE_SHIFT); + memset(__node_data[node], 0, PAGE_SIZE); NODE_DATA(node)->bdata = &bootmem_node_data[node]; NODE_DATA(node)->node_start_pfn = start_pfn; diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 852ae4bb7a85309c1152dd201f4b3d06bdc53591..6d40bc783459fae425577c4da3b145e1907368de 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -20,6 +20,7 @@ config MACH_TXX9 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN + select HAVE_CLK config TOSHIBA_JMR3927 bool "Toshiba JMR-TX3927 board" diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h index 6c6defc24619fbab673b6296387c1dead503158b..af9cf30ed47430720ffb4736378336ee04edc9fa 100644 --- a/arch/parisc/include/asm/atomic.h +++ b/arch/parisc/include/asm/atomic.h @@ -141,7 +141,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) #define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0) -#define ATOMIC_INIT(i) ((atomic_t) { (i) }) +#define ATOMIC_INIT(i) { (i) } #define smp_mb__before_atomic_dec() smp_mb() #define smp_mb__after_atomic_dec() smp_mb() @@ -150,7 +150,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) #ifdef CONFIG_64BIT -#define ATOMIC64_INIT(i) ((atomic64_t) { (i) }) +#define ATOMIC64_INIT(i) { (i) } static __inline__ s64 __atomic64_add_return(s64 i, atomic64_t *v) diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index d4b94b395c1641f6a3c88bf9b50795b36e86d09f..2c05a9292a81cb1138a28af59216eef1d829c421 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -309,7 +309,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp, cregs->ksp = (unsigned long)stack + (pregs->gr[21] & (THREAD_SIZE - 1)); cregs->gr[30] = usp; - if (p->personality == PER_HPUX) { + if (personality(p->personality) == PER_HPUX) { #ifdef CONFIG_HPUX cregs->kpc = (unsigned long) &hpux_child_return; #else diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index c9b932260f4713969cc8df8c51a9813110fb622f..7426e40699bdbf08575d0b69722e6594a1535076 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -225,12 +225,12 @@ long parisc_personality(unsigned long personality) long err; if (personality(current->personality) == PER_LINUX32 - && personality == PER_LINUX) - personality = PER_LINUX32; + && personality(personality) == PER_LINUX) + personality = (personality & ~PER_MASK) | PER_LINUX32; err = sys_personality(personality); - if (err == PER_LINUX32) - err = PER_LINUX; + if (personality(err) == PER_LINUX32) + err = (err & ~PER_MASK) | PER_LINUX; return err; } diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 8d35d2c1f694772ae733fc4d20c0d1fad683948a..4f9c9f682ecfe14b074869b7e93e79fa74326026 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -345,6 +345,13 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" + usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" + usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + }; /include/ "qoriq-sec4.0-0.dtsi" }; diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index f4337bacd0e7c2692396954a5f51a4ba02e1416b..26e541c4662b27ce2c4429a2325083f8f065bf35 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -6,28 +6,27 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_EMBEDDED=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P1023_RDS=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_CPM2=y -CONFIG_GPIO_MPC8XXX=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y @@ -63,11 +62,11 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -80,15 +79,14 @@ CONFIG_SATA_FSL=y CONFIG_SATA_SIL24=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_FS_ENET=y +CONFIG_FSL_PQ_MDIO=y +CONFIG_E1000E=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_FS_ENET=y -CONFIG_E1000E=y -CONFIG_FSL_PQ_MDIO=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -98,16 +96,15 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_QE=m -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y +CONFIG_GPIO_MPC8XXX=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_SOUND=y @@ -123,7 +120,6 @@ CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set @@ -150,22 +146,15 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_FRAME_WARN=8092 CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/chroma_defconfig b/arch/powerpc/configs/chroma_defconfig index b1f9597fe312305e40b676d9f8bf3288ecffe49f..29bb11ec6c640677a73c3e16058897789f1fba2f 100644 --- a/arch/powerpc/configs/chroma_defconfig +++ b/arch/powerpc/configs/chroma_defconfig @@ -21,8 +21,8 @@ CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y -CONFIG_CGROUP_MEM_RES_CTLR=y -CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y +CONFIG_CGROUP_MEMCG=y +CONFIG_CGROUP_MEMCG_SWAP=y CONFIG_NAMESPACES=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index cbb98c1234fdea1040292542a4ec4277e5bf76e2..8b3d57c1ebe81312673642db4765408a7de5c322 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -6,8 +6,8 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y -CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -21,23 +21,22 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P2041_RDB=y CONFIG_P3041_DS=y CONFIG_P4080_DS=y CONFIG_P5020_DS=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_KEXEC=y CONFIG_IRQ_ALL_CPUS=y CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_FSL_LBC=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MSI=y # CONFIG_PCIEASPM is not set +CONFIG_PCI_MSI=y CONFIG_RAPIDIO=y CONFIG_FSL_RIO=y CONFIG_NET=y @@ -70,6 +69,7 @@ CONFIG_INET_IPCOMP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y @@ -77,17 +77,14 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_NAND_FSL_ELBC=y -CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND_FSL_IFC=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -115,11 +112,9 @@ CONFIG_SERIO_LIBPS2=y CONFIG_PPC_EPAPR_HV_BYTECHAN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -132,7 +127,6 @@ CONFIG_SPI_FSL_ESPI=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_USB_HID=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -142,8 +136,6 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_OF=y -CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y @@ -170,19 +162,16 @@ CONFIG_HUGETLBFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_RCU_TRACE=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD4=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index dd89de8b0b7f59945eb656564d49d19bcf2af121..0516e22ca3de3c16b89cdf0b4d9c7865e2d791c9 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -56,6 +56,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 15130066e5e24ee15fb2d9442bb1e3c6c36c912a..07b7f2af2dca7ed9e06f7baea8e46f904fcb8aba 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,8 +1,10 @@ +CONFIG_PPC64=y +CONFIG_ALTIVEC=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y @@ -13,15 +15,16 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_SMP=y -CONFIG_NR_CPUS=4 -CONFIG_KEXEC=y -# CONFIG_RELOCATABLE is not set +# CONFIG_PPC_PSERIES is not set CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_PMAC64=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_MIGRATION is not set CONFIG_PCI_MSI=y CONFIG_NET=y CONFIG_PACKET=y @@ -49,6 +52,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y @@ -56,6 +60,8 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_CDROM_PKTCDVD=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -79,24 +85,33 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m -CONFIG_MACINTOSH_DRIVERS=y +CONFIG_IEEE1394=y +CONFIG_IEEE1394_OHCI1394=y +CONFIG_IEEE1394_SBP2=m +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y +CONFIG_WINDFARM_PM121=y CONFIG_NETDEVICES=y -CONFIG_BONDING=m CONFIG_DUMMY=m -CONFIG_MII=y +CONFIG_BONDING=m CONFIG_TUN=m +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SUNGEM=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_TIGON3=y CONFIG_E1000=y -CONFIG_SUNGEM=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m +CONFIG_TIGON3=y CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -106,24 +121,36 @@ CONFIG_USB_USBNET=m # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_PPP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set -CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y CONFIG_RAW_DRIVER=y CONFIG_I2C_CHARDEV=y # CONFIG_HWMON is not set -CONFIG_AGP=y -CONFIG_DRM=y -CONFIG_DRM_NOUVEAU=y +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_TILEBLITTING=y +CONFIG_FB_OF=y +CONFIG_FB_NVIDIA=y +CONFIG_FB_NVIDIA_I2C=y CONFIG_FB_RADEON=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m @@ -131,7 +158,15 @@ CONFIG_SND_SEQUENCER=m CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_POWERMAC=m +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m CONFIG_SND_USB_AUDIO=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y CONFIG_HID_GYRATION=y CONFIG_LOGITECH_FF=y CONFIG_HID_PANTHERLORD=y @@ -139,12 +174,13 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y CONFIG_USB=y +CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y @@ -208,6 +244,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_XFS_FS=m CONFIG_XFS_POSIX_ACL=y +CONFIG_INOTIFY=y +CONFIG_AUTOFS_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y @@ -221,12 +259,14 @@ CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFSD=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_1250=y CONFIG_NLS_CODEPAGE_1251=y @@ -234,23 +274,29 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y +CONFIG_CRC_T10DIF=y +CONFIG_LIBCRC32C=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y -CONFIG_STRICT_DEVMEM=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_BOOTX_TEXT=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m @@ -260,6 +306,3 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set -# CONFIG_VIRTUALIZATION is not set -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=m diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 5aac9a8bc53b2294dfbcb64df800d6aea078fdec..9352e4430c3b05419fdff7ee3b3ec91cfeaeee5d 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -2,12 +2,12 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y # CONFIG_PPC_CHRP is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_83xx=y @@ -25,7 +25,6 @@ CONFIG_ASP834x=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_MATH_EMULATION=y -CONFIG_SPARSE_IRQ=y CONFIG_PCI=y CONFIG_NET=y CONFIG_PACKET=y @@ -42,10 +41,9 @@ CONFIG_INET_ESP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -64,15 +62,14 @@ CONFIG_ATA=y CONFIG_SATA_FSL=y CONFIG_SATA_SIL=y CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_UCC_GETH=y +CONFIG_GIANFAR=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_VITESSE_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_GIANFAR=y -CONFIG_UCC_GETH=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -112,17 +109,12 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_CRC_T10DIF=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 03ee911c45775410c141ab108019b278ae726d17..8b5bda27d248047b43d59ffdd9af22922e599936 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -5,7 +5,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -17,6 +19,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -40,8 +44,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_FORCE_MAX_ZONEORDER=12 @@ -74,36 +76,25 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -115,6 +106,7 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_FSL=y CONFIG_PATA_ALI=y +CONFIG_PATA_VIA=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_FS_ENET=y @@ -134,7 +126,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -183,7 +174,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -229,18 +219,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index fdfa84dc908f21c318f0b0409f0604524f99a2c2..b0974e7e98aefc6f4e7b39a0025c3435e5ebafe1 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -7,7 +7,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -19,6 +21,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -42,8 +46,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IRQ_ALL_CPUS=y @@ -77,36 +79,25 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -137,7 +128,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -186,7 +176,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -232,18 +221,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 50d82c8a037f4cec2903504541b39a6eb2352331..b3c083de17ad5d3d06739eecdde3926df8b1c39c 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -553,9 +553,7 @@ static inline int cpu_has_feature(unsigned long feature) & feature); } -#ifdef CONFIG_HAVE_HW_BREAKPOINT #define HBP_NUM 1 -#endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif /* !__ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index 50ea12fd7bf5eeab23e6fc1bccafdf4dbe2ad89b..a8bf5c673a3c430c7aa6f45cbfd43e290dd3a95c 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -33,6 +33,7 @@ #include #include #include +#include #define KVM_MAX_VCPUS NR_CPUS #define KVM_MAX_VCORES NR_CPUS diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 0124937a23b97e104260f9cd4bbe1c409bdf1ff5..e006f0bdea95f1a9464c688928dc7206690f5c14 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -219,4 +219,16 @@ void kvmppc_claim_lpid(long lpid); void kvmppc_free_lpid(long lpid); void kvmppc_init_lpid(unsigned long nr_lpids); +static inline void kvmppc_mmu_flush_icache(pfn_t pfn) +{ + /* Clear i-cache for new pages */ + struct page *page; + page = pfn_to_page(pfn); + if (!test_bit(PG_arch_1, &page->flags)) { + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } +} + + #endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h index 326d33ca55cdc33e8b3cb112f0fefb8117bab3af..d4f471fb10310b75c056345e3094e8180930048a 100644 --- a/arch/powerpc/include/asm/mpic_msgr.h +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -14,6 +14,7 @@ #include #include #include +#include struct mpic_msgr { u32 __iomem *base; diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 53b6dfa83344a9f3dbe6b68ef72c6d60948f26ab..54b73a28c20579f4f6923e4f9711b5d7dc062205 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -386,6 +386,7 @@ extern unsigned long cpuidle_disable; enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF}; extern int powersave_nap; /* set if nap mode can be used in idle loop */ +extern void power7_nap(void); #ifdef CONFIG_PSERIES_IDLE extern void update_smt_snooze_delay(int snooze); diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 85b05c463fae9077b4490bacfa80c31050a617fa..e8995727b1c15207757969ca9e4cd5b7990c2d17 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -76,6 +76,7 @@ int main(void) DEFINE(SIGSEGV, SIGSEGV); DEFINE(NMI_MASK, NMI_MASK); DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr)); + DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit)); #else DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c index 5b25c8060fd67a8ff1ec2ff290af5ec740b6376f..a892680668d86ce53d3d8e405c807d968c701a92 100644 --- a/arch/powerpc/kernel/dbell.c +++ b/arch/powerpc/kernel/dbell.c @@ -28,6 +28,8 @@ void doorbell_setup_this_cpu(void) void doorbell_cause_ipi(int cpu, unsigned long data) { + /* Order previous accesses vs. msgsnd, which is treated as a store */ + mb(); ppc_msgsnd(PPC_DBELL, 0, data); } diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 2d7bb8ced136c1e618d1e25229553a70512dc927..e4897523de41e45476bf002a64a3ab68d3e85e22 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -83,11 +83,10 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) return 0; } - if ((tbl->it_offset + tbl->it_size) > (mask >> IOMMU_PAGE_SHIFT)) { - dev_info(dev, "Warning: IOMMU window too big for device mask\n"); - dev_info(dev, "mask: 0x%08llx, table end: 0x%08lx\n", - mask, (tbl->it_offset + tbl->it_size) << - IOMMU_PAGE_SHIFT); + if (tbl->it_offset > (mask >> IOMMU_PAGE_SHIFT)) { + dev_info(dev, "Warning: IOMMU offset too big for device mask\n"); + dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n", + mask, tbl->it_offset << IOMMU_PAGE_SHIFT); return 0; } else return 1; diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 4b01a25e29ef61ea5cdeb07a14939142ba1ecdd9..b40e0b4815b3f5297154fa9c6e8a66fa4ce7c574 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -370,6 +370,12 @@ _GLOBAL(ret_from_fork) li r3,0 b syscall_exit + .section ".toc","aw" +DSCR_DEFAULT: + .tc dscr_default[TC],dscr_default + + .section ".text" + /* * This routine switches between two different tasks. The process * state of one is saved on its kernel stack. Then the state @@ -509,9 +515,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) mr r1,r8 /* start using new stack pointer */ std r7,PACAKSAVE(r13) - ld r6,_CCR(r1) - mtcrf 0xFF,r6 - #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION ld r0,THREAD_VRSAVE(r4) @@ -520,14 +523,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif /* CONFIG_ALTIVEC */ #ifdef CONFIG_PPC64 BEGIN_FTR_SECTION + lwz r6,THREAD_DSCR_INHERIT(r4) + ld r7,DSCR_DEFAULT@toc(2) ld r0,THREAD_DSCR(r4) - cmpd r0,r25 - beq 1f + cmpwi r6,0 + bne 1f + ld r0,0(r7) +1: cmpd r0,r25 + beq 2f mtspr SPRN_DSCR,r0 -1: +2: END_FTR_SECTION_IFSET(CPU_FTR_DSCR) #endif + ld r6,_CCR(r1) + mtcrf 0xFF,r6 + /* r3-r13 are destroyed -- Cort */ REST_8GPRS(14, r1) REST_10GPRS(22, r1) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index e894515e77bbfa950c7d3e00cfbaafa07d0a0075..39aa97d3ff883a2ed5121e1cc11afd5ffae0f898 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -186,7 +186,7 @@ hardware_interrupt_hv: KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x800) MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer) - MASKABLE_EXCEPTION_HV(0x980, 0x982, decrementer) + STD_EXCEPTION_HV(0x980, 0x982, hdecrementer) STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00) @@ -486,6 +486,7 @@ machine_check_common: STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt) + STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt) STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index f3a82dde61dbfe8b469a63d4874f2de53bf1b476..956a4c496de942d93853f42f2db1067f45cf0085 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -253,7 +253,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) /* Do not emulate user-space instructions, instead single-step them */ if (user_mode(regs)) { - bp->ctx->task->thread.last_hit_ubp = bp; + current->thread.last_hit_ubp = bp; regs->msr |= MSR_SE; goto out; } diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 7140d838339e1a9e2ef691ff4079ea022f4d964c..e11863f4e595e2a3302e3ead79b439751ca5d402 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -28,7 +28,9 @@ _GLOBAL(power7_idle) lwz r4,ADDROFF(powersave_nap)(r3) cmpwi 0,r4,0 beqlr + /* fall through */ +_GLOBAL(power7_nap) /* NAP is a state loss, we create a regs frame on the * stack, fill it up with the state we care about and * stick a pointer to it in PACAR1. We really only diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 782bd0a3c2f0f95496b1b144ebb3ec6e6218e0f8..c470a40b29f5d4937883cfcd8a40dd1c6bbdcfd1 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -25,6 +25,7 @@ #include #include #include +#include /* * This table contains the mapping between PowerPC hardware trap types, and @@ -101,6 +102,21 @@ static int computeSignal(unsigned int tt) return SIGHUP; /* default for things we don't know about */ } +/** + * + * kgdb_skipexception - Bail out of KGDB when we've been triggered. + * @exception: Exception vector number + * @regs: Current &struct pt_regs. + * + * On some architectures we need to skip a breakpoint exception when + * it occurs after a breakpoint has been removed. + * + */ +int kgdb_skipexception(int exception, struct pt_regs *regs) +{ + return kgdb_isremovedbreak(regs->nip); +} + static int kgdb_call_nmi_hook(struct pt_regs *regs) { kgdb_nmicallback(raw_smp_processor_id(), regs); @@ -138,6 +154,8 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs) static int kgdb_singlestep(struct pt_regs *regs) { struct thread_info *thread_info, *exception_thread_info; + struct thread_info *backup_current_thread_info = \ + (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL); if (user_mode(regs)) return 0; @@ -155,13 +173,17 @@ static int kgdb_singlestep(struct pt_regs *regs) thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1)); exception_thread_info = current_thread_info(); - if (thread_info != exception_thread_info) + if (thread_info != exception_thread_info) { + /* Save the original current_thread_info. */ + memcpy(backup_current_thread_info, exception_thread_info, sizeof *thread_info); memcpy(exception_thread_info, thread_info, sizeof *thread_info); + } kgdb_handle_exception(0, SIGTRAP, 0, regs); if (thread_info != exception_thread_info) - memcpy(thread_info, exception_thread_info, sizeof *thread_info); + /* Restore current_thread_info lastly. */ + memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info); return 1; } @@ -410,7 +432,6 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, #else linux_regs->msr |= MSR_SE; #endif - kgdb_single_step = 1; atomic_set(&kgdb_cpu_doing_single_step, raw_smp_processor_id()); } diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 710f400476deb8461a98a1342c6ee1b669fbe686..1a1f2ddfb581a222fb5fe85a0d8983ef5ad7e2af 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -802,16 +802,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, #endif /* CONFIG_PPC_STD_MMU_64 */ #ifdef CONFIG_PPC64 if (cpu_has_feature(CPU_FTR_DSCR)) { - if (current->thread.dscr_inherit) { - p->thread.dscr_inherit = 1; - p->thread.dscr = current->thread.dscr; - } else if (0 != dscr_default) { - p->thread.dscr_inherit = 1; - p->thread.dscr = dscr_default; - } else { - p->thread.dscr_inherit = 0; - p->thread.dscr = 0; - } + p->thread.dscr_inherit = current->thread.dscr_inherit; + p->thread.dscr = current->thread.dscr; } #endif diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0321007086f7c499771ad0f71bc1f63969faff7a..8d4214afc21d6934fef8d12b582073c64a6ff7f3 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -198,8 +198,15 @@ void smp_muxed_ipi_message_pass(int cpu, int msg) struct cpu_messages *info = &per_cpu(ipi_message, cpu); char *message = (char *)&info->messages; + /* + * Order previous accesses before accesses in the IPI handler. + */ + smp_mb(); message[msg] = 1; - mb(); + /* + * cause_ipi functions are required to include a full barrier + * before doing whatever causes the IPI. + */ smp_ops->cause_ipi(cpu, info->data); } @@ -211,7 +218,7 @@ irqreturn_t smp_ipi_demux(void) mb(); /* order any irq clear */ do { - all = xchg_local(&info->messages, 0); + all = xchg(&info->messages, 0); #ifdef __BIG_ENDIAN if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION))) diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index f2496f2faeccc37231110392363d0914d599e5b5..4e3cc47f26b90e157ebb5c2a1cd156918e655930 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -107,11 +107,11 @@ long ppc64_personality(unsigned long personality) long ret; if (personality(current->personality) == PER_LINUX32 - && personality == PER_LINUX) - personality = PER_LINUX32; + && personality(personality) == PER_LINUX) + personality = (personality & ~PER_MASK) | PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret = (ret & ~PER_MASK) | PER_LINUX; return ret; } #endif diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 3529446c2abd78a407f9b3a7fd9735ed49802656..8302af6492195b77ac8a5b7f5dfbc69dfc7d43b8 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -194,6 +194,14 @@ static ssize_t show_dscr_default(struct device *dev, return sprintf(buf, "%lx\n", dscr_default); } +static void update_dscr(void *dummy) +{ + if (!current->thread.dscr_inherit) { + current->thread.dscr = dscr_default; + mtspr(SPRN_DSCR, dscr_default); + } +} + static ssize_t __used store_dscr_default(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -206,6 +214,8 @@ static ssize_t __used store_dscr_default(struct device *dev, return -EINVAL; dscr_default = val; + on_each_cpu(update_dscr, NULL, 1); + return count; } diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index be171ee73bf8cd3bef83630fbc031ad4f29410e7..e49e93191b69a736332e06cf9be56aad189d0ec3 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -535,6 +535,15 @@ void timer_interrupt(struct pt_regs * regs) trace_timer_interrupt_exit(regs); } +/* + * Hypervisor decrementer interrupts shouldn't occur but are sometimes + * left pending on exit from a KVM guest. We don't need to do anything + * to clear them, as they are edge-triggered. + */ +void hdec_interrupt(struct pt_regs *regs) +{ +} + #ifdef CONFIG_SUSPEND static void generic_suspend_disable_irqs(void) { diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 158972341a2d7a66da48c32878fdc0842b2a4feb..ae0843fa7a61f64540214b2fbf658265d24879df 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -972,8 +972,9 @@ static int emulate_instruction(struct pt_regs *regs) cpu_has_feature(CPU_FTR_DSCR)) { PPC_WARN_EMULATED(mtdscr, regs); rd = (instword >> 21) & 0x1f; - mtspr(SPRN_DSCR, regs->gpr[rd]); + current->thread.dscr = regs->gpr[rd]; current->thread.dscr_inherit = 1; + mtspr(SPRN_DSCR, current->thread.dscr); return 0; } #endif diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c index f922c29bb234d9bc6f2baf44175e934b63de5f86..837f13e7b6bfc1be3f7ed65a1000964f04825ebe 100644 --- a/arch/powerpc/kvm/book3s_32_mmu_host.c +++ b/arch/powerpc/kvm/book3s_32_mmu_host.c @@ -211,6 +211,9 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte) pteg1 |= PP_RWRX; } + if (orig_pte->may_execute) + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); + local_irq_disable(); if (pteg[rr]) { diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c index 10fc8ec9d2a8b7e1e8e7ad8113e8dce633a5d977..0688b6b3958594fce84a62cfbd2f3564b5650781 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -126,6 +126,8 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte) if (!orig_pte->may_execute) rflags |= HPTE_R_N; + else + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M); diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 5a84c8d3d04050b98ab818c9d83cedeb74b8f235..44b72feaff7d9876fad230253be42c1aee6e8af7 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1421,13 +1421,13 @@ _GLOBAL(kvmppc_h_cede) sync /* order setting ceded vs. testing prodded */ lbz r5,VCPU_PRODDED(r3) cmpwi r5,0 - bne 1f + bne kvm_cede_prodded li r0,0 /* set trap to 0 to say hcall is handled */ stw r0,VCPU_TRAP(r3) li r0,H_SUCCESS std r0,VCPU_GPR(R3)(r3) BEGIN_FTR_SECTION - b 2f /* just send it up to host on 970 */ + b kvm_cede_exit /* just send it up to host on 970 */ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) /* @@ -1446,7 +1446,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) or r4,r4,r0 PPC_POPCNTW(R7,R4) cmpw r7,r8 - bge 2f + bge kvm_cede_exit stwcx. r4,0,r6 bne 31b li r0,1 @@ -1555,7 +1555,8 @@ kvm_end_cede: b hcall_real_fallback /* cede when already previously prodded case */ -1: li r0,0 +kvm_cede_prodded: + li r0,0 stb r0,VCPU_PRODDED(r3) sync /* order testing prodded vs. clearing ceded */ stb r0,VCPU_CEDED(r3) @@ -1563,7 +1564,8 @@ kvm_end_cede: blr /* we've ceded but we want to give control to the host */ -2: li r3,H_TOO_HARD +kvm_cede_exit: + li r3,H_TOO_HARD blr secondary_too_late: diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index c510fc961302c2d1ae1284cc3d1aab1139002fbd..a2b66717813dfef6c43e9bf23864f8766266f0a5 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -322,11 +322,11 @@ static inline void kvmppc_e500_ref_release(struct tlbe_ref *ref) static void clear_tlb1_bitmap(struct kvmppc_vcpu_e500 *vcpu_e500) { if (vcpu_e500->g2h_tlb1_map) - memset(vcpu_e500->g2h_tlb1_map, - sizeof(u64) * vcpu_e500->gtlb_params[1].entries, 0); + memset(vcpu_e500->g2h_tlb1_map, 0, + sizeof(u64) * vcpu_e500->gtlb_params[1].entries); if (vcpu_e500->h2g_tlb1_rmap) - memset(vcpu_e500->h2g_tlb1_rmap, - sizeof(unsigned int) * host_tlb_params[1].entries, 0); + memset(vcpu_e500->h2g_tlb1_rmap, 0, + sizeof(unsigned int) * host_tlb_params[1].entries); } static void clear_tlb_privs(struct kvmppc_vcpu_e500 *vcpu_e500) @@ -539,6 +539,9 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize, ref, gvaddr, stlbe); + + /* Clear i-cache for new pages */ + kvmppc_mmu_flush_icache(pfn); } /* XXX only map the one-one case, for now use TLB0 */ diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index dd223b3eb333ac3446725f0768d5da412000ba75..17e5b23643124347febe56a05f5deb7e1a2e361e 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -20,7 +20,7 @@ int patch_instruction(unsigned int *addr, unsigned int instr) { int err; - err = __put_user(instr, addr); + __put_user_size(instr, addr, 4, err); if (err) return err; asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr)); diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index f9ede7c6606e54d36f4b54fddc5b3101085ee5ef..0d24ff15f5f6fb197af85a4d9e537eb8880f099c 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -288,7 +288,7 @@ err1; stb r0,0(r3) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_usercopy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -326,38 +326,7 @@ err1; stb r0,0(r3) dcbt r0,r8,0b01010 /* GO */ .machine pop - /* - * We prefetch both the source and destination using enhanced touch - * instructions. We use a stream ID of 0 for the load side and - * 1 for the store side. - */ - clrrdi r6,r4,7 - clrrdi r9,r3,7 - ori r9,r9,1 /* stream=1 */ - - srdi r7,r5,7 /* length in cachelines, capped at 0x3FF */ - cmpldi cr1,r7,0x3FF - ble cr1,1f - li r7,0x3FF -1: lis r0,0x0E00 /* depth=7 */ - sldi r7,r7,7 - or r7,r7,r0 - ori r10,r7,1 /* stream=1 */ - - lis r8,0x8000 /* GO=1 */ - clrldi r8,r8,32 - -.machine push -.machine "power4" - dcbt r0,r6,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 - eieio - dcbt r0,r8,0b01010 /* GO */ -.machine pop - - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S index 0efdc51bc7164cf9a1089189a8c6fc64e35002a4..7ba6c96de77856e426fe5cf83ff360280e239194 100644 --- a/arch/powerpc/lib/memcpy_power7.S +++ b/arch/powerpc/lib/memcpy_power7.S @@ -222,7 +222,7 @@ _GLOBAL(memcpy_power7) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_copy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -260,7 +260,7 @@ _GLOBAL(memcpy_power7) dcbt r0,r8,0b01010 /* GO */ .machine pop - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index baaafde7d13596af850a9d7452e596d84a52935a..fbdad0e3929a8ddfbcb0f714a6480f0ca33ba6f6 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -469,6 +469,7 @@ void flush_dcache_icache_page(struct page *page) __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT); #endif } +EXPORT_SYMBOL(flush_dcache_icache_page); void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 39b159751c35ab17d5e3df0dd48282abe5228700..59213cfaeca9f868143261b2a246834c115b6542 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1436,11 +1436,11 @@ static long vphn_get_associativity(unsigned long cpu, /* * Update the node maps and sysfs entries for each cpu whose home node - * has changed. + * has changed. Returns 1 when the topology has changed, and 0 otherwise. */ int arch_update_cpu_topology(void) { - int cpu, nid, old_nid; + int cpu, nid, old_nid, changed = 0; unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0}; struct device *dev; @@ -1466,9 +1466,10 @@ int arch_update_cpu_topology(void) dev = get_cpu_device(cpu); if (dev) kobject_uevent(&dev->kobj, KOBJ_CHANGE); + changed = 1; } - return 1; + return changed; } static void topology_work_fn(struct work_struct *work) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 77b49ddda9d3675ed816d65af7f8c242578c01a0..7cd2dbd6e4c4fa615ae4442c5d00af106f3e17dd 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1431,7 +1431,7 @@ static void perf_event_interrupt(struct pt_regs *regs) if (!event->hw.idx || is_limited_pmc(event->hw.idx)) continue; val = read_pmc(event->hw.idx); - if ((int)val < 0) { + if (pmc_overflow(val)) { /* event has overflowed */ found = 1; record_and_restart(event, val, regs); diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index d544d7816df3229780e4f2c58a1a28355c5c4aae..dba1ce235da59e23172cd5d6474d9ce4a72900ac 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -186,10 +186,13 @@ static void spufs_prune_dir(struct dentry *dir) static int spufs_rmdir(struct inode *parent, struct dentry *dir) { /* remove all entries */ + int res; spufs_prune_dir(dir); d_drop(dir); - - return simple_rmdir(parent, dir); + res = simple_rmdir(parent, dir); + /* We have to give up the mm_struct */ + spu_forget(SPUFS_I(dir->d_inode)->i_ctx); + return res; } static int spufs_fill_dir(struct dentry *dir, @@ -245,9 +248,6 @@ static int spufs_dir_close(struct inode *inode, struct file *file) mutex_unlock(&parent->i_mutex); WARN_ON(ret); - /* We have to give up the mm_struct */ - spu_forget(ctx); - return dcache_dir_close(inode, file); } @@ -450,28 +450,24 @@ spufs_create_context(struct inode *inode, struct dentry *dentry, struct spu_context *neighbor; struct path path = {.mnt = mnt, .dentry = dentry}; - ret = -EPERM; if ((flags & SPU_CREATE_NOSCHED) && !capable(CAP_SYS_NICE)) - goto out_unlock; + return -EPERM; - ret = -EINVAL; if ((flags & (SPU_CREATE_NOSCHED | SPU_CREATE_ISOLATE)) == SPU_CREATE_ISOLATE) - goto out_unlock; + return -EINVAL; - ret = -ENODEV; if ((flags & SPU_CREATE_ISOLATE) && !isolated_loader) - goto out_unlock; + return -ENODEV; gang = NULL; neighbor = NULL; affinity = flags & (SPU_CREATE_AFFINITY_MEM | SPU_CREATE_AFFINITY_SPU); if (affinity) { gang = SPUFS_I(inode)->i_gang; - ret = -EINVAL; if (!gang) - goto out_unlock; + return -EINVAL; mutex_lock(&gang->aff_mutex); neighbor = spufs_assert_affinity(flags, gang, aff_filp); if (IS_ERR(neighbor)) { @@ -492,22 +488,12 @@ spufs_create_context(struct inode *inode, struct dentry *dentry, } ret = spufs_context_open(&path); - if (ret < 0) { + if (ret < 0) WARN_ON(spufs_rmdir(inode, dentry)); - if (affinity) - mutex_unlock(&gang->aff_mutex); - mutex_unlock(&inode->i_mutex); - spu_forget(SPUFS_I(dentry->d_inode)->i_ctx); - goto out; - } out_aff_unlock: if (affinity) mutex_unlock(&gang->aff_mutex); -out_unlock: - mutex_unlock(&inode->i_mutex); -out: - dput(dentry); return ret; } @@ -580,18 +566,13 @@ static int spufs_create_gang(struct inode *inode, int ret; ret = spufs_mkgang(inode, dentry, mode & S_IRWXUGO); - if (ret) - goto out; - - ret = spufs_gang_open(&path); - if (ret < 0) { - int err = simple_rmdir(inode, dentry); - WARN_ON(err); + if (!ret) { + ret = spufs_gang_open(&path); + if (ret < 0) { + int err = simple_rmdir(inode, dentry); + WARN_ON(err); + } } - -out: - mutex_unlock(&inode->i_mutex); - dput(dentry); return ret; } @@ -601,40 +582,32 @@ static struct file_system_type spufs_type; long spufs_create(struct path *path, struct dentry *dentry, unsigned int flags, umode_t mode, struct file *filp) { + struct inode *dir = path->dentry->d_inode; int ret; - ret = -EINVAL; /* check if we are on spufs */ if (path->dentry->d_sb->s_type != &spufs_type) - goto out; + return -EINVAL; /* don't accept undefined flags */ if (flags & (~SPU_CREATE_FLAG_ALL)) - goto out; + return -EINVAL; /* only threads can be underneath a gang */ - if (path->dentry != path->dentry->d_sb->s_root) { - if ((flags & SPU_CREATE_GANG) || - !SPUFS_I(path->dentry->d_inode)->i_gang) - goto out; - } + if (path->dentry != path->dentry->d_sb->s_root) + if ((flags & SPU_CREATE_GANG) || !SPUFS_I(dir)->i_gang) + return -EINVAL; mode &= ~current_umask(); if (flags & SPU_CREATE_GANG) - ret = spufs_create_gang(path->dentry->d_inode, - dentry, path->mnt, mode); + ret = spufs_create_gang(dir, dentry, path->mnt, mode); else - ret = spufs_create_context(path->dentry->d_inode, - dentry, path->mnt, flags, mode, + ret = spufs_create_context(dir, dentry, path->mnt, flags, mode, filp); if (ret >= 0) - fsnotify_mkdir(path->dentry->d_inode, dentry); - return ret; + fsnotify_mkdir(dir, dentry); -out: - mutex_unlock(&path->dentry->d_inode->i_mutex); - dput(dentry); return ret; } diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c index 5665dcc382c7350208e5c2b084a0e94761ce5051..5b7d8ffbf8907933b21f9be8e4e4333c81a02e9d 100644 --- a/arch/powerpc/platforms/cell/spufs/syscalls.c +++ b/arch/powerpc/platforms/cell/spufs/syscalls.c @@ -70,7 +70,7 @@ static long do_spu_create(const char __user *pathname, unsigned int flags, ret = PTR_ERR(dentry); if (!IS_ERR(dentry)) { ret = spufs_create(&path, dentry, flags, mode, neighbor); - path_put(&path); + done_path_create(&path, dentry); } return ret; diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 3ef46254c35ba907dfd9329f9164db3176a9d7a4..7698b6e13c57f6312a7505a3610fbf6b27271991 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -106,14 +106,6 @@ static void pnv_smp_cpu_kill_self(void) { unsigned int cpu; - /* If powersave_nap is enabled, use NAP mode, else just - * spin aimlessly - */ - if (!powersave_nap) { - generic_mach_cpu_die(); - return; - } - /* Standard hot unplug procedure */ local_irq_disable(); idle_task_exit(); @@ -128,7 +120,7 @@ static void pnv_smp_cpu_kill_self(void) */ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1); while (!generic_check_cpu_restart(cpu)) { - power7_idle(); + power7_nap(); if (!generic_check_cpu_restart(cpu)) { DBG("CPU%d Unexpected exit while offline !\n", cpu); /* We may be getting an IPI, so we re-enable diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index a7b2a600d0a4d0aa7878a633eb3549f0a0d3a373..c37f46136321272465327a106383fb440e48fa75 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -465,7 +465,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) iounmap(hose->cfg_data); iounmap(hose->cfg_addr); pcibios_free_controller(hose); - return 0; + return -ENODEV; } setup_pci_cmd(hose); @@ -827,6 +827,7 @@ struct device_node *fsl_pci_primary; void __devinit fsl_pci_init(void) { + int ret; struct device_node *node; struct pci_controller *hose; dma_addr_t max = 0xffffffff; @@ -855,10 +856,12 @@ void __devinit fsl_pci_init(void) if (!fsl_pci_primary) fsl_pci_primary = node; - fsl_add_bridge(node, fsl_pci_primary == node); - hose = pci_find_hose_for_OF_device(node); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); + ret = fsl_add_bridge(node, fsl_pci_primary == node); + if (ret == 0) { + hose = pci_find_hose_for_OF_device(node); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } } } diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index 483d8fa72e8ba3bc6bca736faf2f007399282e13..e961f8c4a8f070f341c2b80bbd8a18456a323ade 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -14,6 +14,9 @@ #include #include #include +#include +#include +#include #include #include #include diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c index 253dce98c16ef05aef07caad41af6a7ecdd78fa7..df0fc58214697623b429f55555d494e8ccf56c52 100644 --- a/arch/powerpc/sysdev/xics/icp-hv.c +++ b/arch/powerpc/sysdev/xics/icp-hv.c @@ -65,7 +65,11 @@ static inline void icp_hv_set_xirr(unsigned int value) static inline void icp_hv_set_qirr(int n_cpu , u8 value) { int hw_cpu = get_hard_smp_processor_id(n_cpu); - long rc = plpar_hcall_norets(H_IPI, hw_cpu, value); + long rc; + + /* Make sure all previous accesses are ordered before IPI sending */ + mb(); + rc = plpar_hcall_norets(H_IPI, hw_cpu, value); if (rc != H_SUCCESS) { pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x " "returned %ld\n", __func__, n_cpu, hw_cpu, value, rc); @@ -111,7 +115,7 @@ static unsigned int icp_hv_get_irq(void) if (vec == XICS_IRQ_SPURIOUS) return NO_IRQ; - irq = irq_radix_revmap_lookup(xics_host, vec); + irq = irq_find_mapping(xics_host, vec); if (likely(irq != NO_IRQ)) { xics_push_cppr(vec); return irq; diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c index 4c79b6fbee1c07fefc49fcdc094e94eede95bc59..48861d3fcd070cbc56f4e4189e4396f7196938c4 100644 --- a/arch/powerpc/sysdev/xics/icp-native.c +++ b/arch/powerpc/sysdev/xics/icp-native.c @@ -119,7 +119,7 @@ static unsigned int icp_native_get_irq(void) if (vec == XICS_IRQ_SPURIOUS) return NO_IRQ; - irq = irq_radix_revmap_lookup(xics_host, vec); + irq = irq_find_mapping(xics_host, vec); if (likely(irq != NO_IRQ)) { xics_push_cppr(vec); return irq; diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c index cd1d18db92c6afdc5e35c7980b4e038b8a6057a4..9049d9f444857fea1c0d50a87164fa63e785097b 100644 --- a/arch/powerpc/sysdev/xics/xics-common.c +++ b/arch/powerpc/sysdev/xics/xics-common.c @@ -329,9 +329,6 @@ static int xics_host_map(struct irq_domain *h, unsigned int virq, pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw); - /* Insert the interrupt mapping into the radix tree for fast lookup */ - irq_radix_revmap_insert(xics_host, virq, hw); - /* They aren't all level sensitive but we just don't really know */ irq_set_status_flags(virq, IRQ_LEVEL); diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index eab3492a45c5c5244eca42d58354cf6d8a092836..9b49c65ee7a42f6f9d0b8dc436628c34bafb262b 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -894,13 +895,13 @@ cmds(struct pt_regs *excp) #endif default: printf("Unrecognized command: "); - do { + do { if (' ' < cmd && cmd <= '~') putchar(cmd); else printf("\\x%x", cmd); cmd = inchar(); - } while (cmd != '\n'); + } while (cmd != '\n'); printf(" (type ? for help)\n"); break; } @@ -1097,7 +1098,7 @@ static long check_bp_loc(unsigned long addr) return 1; } -static char *breakpoint_help_string = +static char *breakpoint_help_string = "Breakpoint command usage:\n" "b show breakpoints\n" "b [cnt] set breakpoint at given instr addr\n" @@ -1193,7 +1194,7 @@ bpt_cmds(void) default: termch = cmd; - cmd = skipbl(); + cmd = skipbl(); if (cmd == '?') { printf(breakpoint_help_string); break; @@ -1359,7 +1360,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr, sp + REGS_OFFSET); break; } - printf("--- Exception: %lx %s at ", regs.trap, + printf("--- Exception: %lx %s at ", regs.trap, getvecname(TRAP(®s))); pc = regs.nip; lr = regs.link; @@ -1623,14 +1624,14 @@ static void super_regs(void) cmd = skipbl(); if (cmd == '\n') { - unsigned long sp, toc; + unsigned long sp, toc; asm("mr %0,1" : "=r" (sp) :); asm("mr %0,2" : "=r" (toc) :); printf("msr = "REG" sprg0= "REG"\n", mfmsr(), mfspr(SPRN_SPRG0)); printf("pvr = "REG" sprg1= "REG"\n", - mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); + mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); printf("dec = "REG" sprg2= "REG"\n", mfspr(SPRN_DEC), mfspr(SPRN_SPRG2)); printf("sp = "REG" sprg3= "REG"\n", sp, mfspr(SPRN_SPRG3)); @@ -1783,7 +1784,7 @@ byterev(unsigned char *val, int size) static int brev; static int mnoread; -static char *memex_help_string = +static char *memex_help_string = "Memory examine command usage:\n" "m [addr] [flags] examine/change memory\n" " addr is optional. will start where left off.\n" @@ -1798,7 +1799,7 @@ static char *memex_help_string = "NOTE: flags are saved as defaults\n" ""; -static char *memex_subcmd_help_string = +static char *memex_subcmd_help_string = "Memory examine subcommands:\n" " hexval write this val to current location\n" " 'string' write chars from string to this location\n" @@ -2064,7 +2065,7 @@ prdump(unsigned long adrs, long ndump) nr = mread(adrs, temp, r); adrs += nr; for (m = 0; m < r; ++m) { - if ((m & (sizeof(long) - 1)) == 0 && m > 0) + if ((m & (sizeof(long) - 1)) == 0 && m > 0) putchar(' '); if (m < nr) printf("%.2x", temp[m]); @@ -2072,7 +2073,7 @@ prdump(unsigned long adrs, long ndump) printf("%s", fault_chars[fault_type]); } for (; m < 16; ++m) { - if ((m & (sizeof(long) - 1)) == 0) + if ((m & (sizeof(long) - 1)) == 0) putchar(' '); printf(" "); } @@ -2148,45 +2149,28 @@ print_address(unsigned long addr) void dump_log_buf(void) { - const unsigned long size = 128; - unsigned long end, addr; - unsigned char buf[size + 1]; - - addr = 0; - buf[size] = '\0'; - - if (setjmp(bus_error_jmp) != 0) { - printf("Unable to lookup symbol __log_buf!\n"); - return; - } - - catch_memory_errors = 1; - sync(); - addr = kallsyms_lookup_name("__log_buf"); - - if (! addr) - printf("Symbol __log_buf not found!\n"); - else { - end = addr + (1 << CONFIG_LOG_BUF_SHIFT); - while (addr < end) { - if (! mread(addr, buf, size)) { - printf("Can't read memory at address 0x%lx\n", addr); - break; - } - - printf("%s", buf); - - if (strlen(buf) < size) - break; - - addr += size; - } - } - - sync(); - /* wait a little while to see if we get a machine check */ - __delay(200); - catch_memory_errors = 0; + struct kmsg_dumper dumper = { .active = 1 }; + unsigned char buf[128]; + size_t len; + + if (setjmp(bus_error_jmp) != 0) { + printf("Error dumping printk buffer!\n"); + return; + } + + catch_memory_errors = 1; + sync(); + + kmsg_dump_rewind_nolock(&dumper); + while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) { + buf[len] = '\0'; + printf("%s", buf); + } + + sync(); + /* wait a little while to see if we get a machine check */ + __delay(200); + catch_memory_errors = 0; } /* diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 76de6b68487c8a44aa4eabecc1dddc7d916546e2..107610e01a295e27a7fdb1d82fbf8ad0270a4bfc 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -124,6 +124,7 @@ config S390 select GENERIC_TIME_VSYSCALL select GENERIC_CLOCKEVENTS select KTIME_SCALAR if 32BIT + select HAVE_ARCH_SECCOMP_FILTER config SCHED_OMIT_FRAME_POINTER def_bool y diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 967923dea98de1574458312619c8883b89b09ae7..f39cd710980b91da8d490994bc6e02a1955905f2 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -16,7 +16,7 @@ CONFIG_CGROUPS=y CONFIG_CPUSETS=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y -CONFIG_CGROUP_MEM_RES_CTLR=y +CONFIG_CGROUP_MEMCG=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y CONFIG_CGROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h index 32e8449640facbef375b0a5cb1d33610290c3a7e..9b94a160fe7f06399222ead8530e5a2da2b94f78 100644 --- a/arch/s390/include/asm/elf.h +++ b/arch/s390/include/asm/elf.h @@ -180,7 +180,8 @@ extern char elf_platform[]; #define ELF_PLATFORM (elf_platform) #ifndef CONFIG_64BIT -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) +#define SET_PERSONALITY(ex) \ + set_personality(PER_LINUX | (current->personality & (~PER_MASK))) #else /* CONFIG_64BIT */ #define SET_PERSONALITY(ex) \ do { \ diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h index 799ed0f1643d135c843f3a1cdc41204063289f0f..2d6e6e3805641bbc79ce1ee11aa639f48f5e2933 100644 --- a/arch/s390/include/asm/hugetlb.h +++ b/arch/s390/include/asm/hugetlb.h @@ -66,16 +66,6 @@ static inline pte_t huge_ptep_get(pte_t *ptep) return pte; } -static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - pte_t pte = huge_ptep_get(ptep); - - mm->context.flush_mm = 1; - pmd_clear((pmd_t *) ptep); - return pte; -} - static inline void __pmd_csp(pmd_t *pmdp) { register unsigned long reg2 asm("2") = pmd_val(*pmdp); @@ -117,6 +107,15 @@ static inline void huge_ptep_invalidate(struct mm_struct *mm, __pmd_csp(pmdp); } +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + pte_t pte = huge_ptep_get(ptep); + + huge_ptep_invalidate(mm, addr, ptep); + return pte; +} + #define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \ ({ \ int __changed = !pte_same(huge_ptep_get(__ptep), __entry); \ @@ -131,10 +130,7 @@ static inline void huge_ptep_invalidate(struct mm_struct *mm, ({ \ pte_t __pte = huge_ptep_get(__ptep); \ if (pte_write(__pte)) { \ - (__mm)->context.flush_mm = 1; \ - if (atomic_read(&(__mm)->context.attach_count) > 1 || \ - (__mm) != current->active_mm) \ - huge_ptep_invalidate(__mm, __addr, __ptep); \ + huge_ptep_invalidate(__mm, __addr, __ptep); \ set_huge_pte_at(__mm, __addr, __ptep, \ huge_pte_wrprotect(__pte)); \ } \ diff --git a/arch/s390/include/asm/posix_types.h b/arch/s390/include/asm/posix_types.h index 7bcc14e395f0a2fd1d85ded571010e05c5c0392e..bf2a2ad2f8004ab36e98d49fccb084a67fba0049 100644 --- a/arch/s390/include/asm/posix_types.h +++ b/arch/s390/include/asm/posix_types.h @@ -13,6 +13,7 @@ */ typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; #define __kernel_size_t __kernel_size_t typedef unsigned short __kernel_old_dev_t; @@ -25,7 +26,6 @@ typedef unsigned short __kernel_mode_t; typedef unsigned short __kernel_ipc_pid_t; typedef unsigned short __kernel_uid_t; typedef unsigned short __kernel_gid_t; -typedef int __kernel_ssize_t; typedef int __kernel_ptrdiff_t; #else /* __s390x__ */ @@ -35,7 +35,6 @@ typedef unsigned int __kernel_mode_t; typedef int __kernel_ipc_pid_t; typedef unsigned int __kernel_uid_t; typedef unsigned int __kernel_gid_t; -typedef long __kernel_ssize_t; typedef long __kernel_ptrdiff_t; typedef unsigned long __kernel_sigset_t; /* at least 32 bits */ diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h index a0a8340daafafb90ad25c822949b6ace5a84a595..ce26ac3cb162899a285e5812a39ea9b1b6ec0484 100644 --- a/arch/s390/include/asm/smp.h +++ b/arch/s390/include/asm/smp.h @@ -44,6 +44,7 @@ static inline void smp_call_online_cpu(void (*func)(void *), void *data) } static inline int smp_find_processor_id(int address) { return 0; } +static inline int smp_store_status(int cpu) { return 0; } static inline int smp_vcpu_scheduled(int cpu) { return 1; } static inline void smp_yield_cpu(int cpu) { } static inline void smp_yield(void) { } diff --git a/arch/s390/include/asm/sparsemem.h b/arch/s390/include/asm/sparsemem.h index 0fb34027d3f6fbdc5a851f796a0e23d368bea071..a60d085ddb4d90089d7e73850955432ca2372eb6 100644 --- a/arch/s390/include/asm/sparsemem.h +++ b/arch/s390/include/asm/sparsemem.h @@ -4,13 +4,11 @@ #ifdef CONFIG_64BIT #define SECTION_SIZE_BITS 28 -#define MAX_PHYSADDR_BITS 46 #define MAX_PHYSMEM_BITS 46 #else #define SECTION_SIZE_BITS 25 -#define MAX_PHYSADDR_BITS 31 #define MAX_PHYSMEM_BITS 31 #endif /* CONFIG_64BIT */ diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h index fb214dd9b7e0631606072a00a6b3994de4e8a97b..fe7b99759e12ffcdf5f2df9880f86f91df3c9800 100644 --- a/arch/s390/include/asm/syscall.h +++ b/arch/s390/include/asm/syscall.h @@ -12,6 +12,7 @@ #ifndef _ASM_SYSCALL_H #define _ASM_SYSCALL_H 1 +#include #include #include #include @@ -87,4 +88,13 @@ static inline void syscall_set_arguments(struct task_struct *task, regs->orig_gpr2 = args[0]; } +static inline int syscall_get_arch(struct task_struct *task, + struct pt_regs *regs) +{ +#ifdef CONFIG_COMPAT + if (test_tsk_thread_flag(task, TIF_31BIT)) + return AUDIT_ARCH_S390; +#endif + return sizeof(long) == 8 ? AUDIT_ARCH_S390X : AUDIT_ARCH_S390; +} #endif /* _ASM_SYSCALL_H */ diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h index 9fde315f3a7cd42184a54f2174584258076e6a60..1d8fe2b17ef6f1d0069c0e3cc8ff70c7d9cc402a 100644 --- a/arch/s390/include/asm/tlbflush.h +++ b/arch/s390/include/asm/tlbflush.h @@ -90,12 +90,10 @@ static inline void __tlb_flush_mm(struct mm_struct * mm) static inline void __tlb_flush_mm_cond(struct mm_struct * mm) { - spin_lock(&mm->page_table_lock); if (mm->context.flush_mm) { __tlb_flush_mm(mm); mm->context.flush_mm = 0; } - spin_unlock(&mm->page_table_lock); } /* diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index d1225089a4bbe09519555c4f5336e283394ff03e..f606d935f4950dcbec6fca5f67b88ac70760dcda 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -620,7 +620,6 @@ asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg) return -EFAULT; if (a.offset & ~PAGE_MASK) return -EINVAL; - a.addr = (unsigned long) compat_ptr(a.addr); return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); } @@ -631,7 +630,6 @@ asmlinkage long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg) if (copy_from_user(&a, arg, sizeof(a))) return -EFAULT; - a.addr = (unsigned long) compat_ptr(a.addr); return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); } diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index e835d6d5b7fdc94ee90e5293087328d638c2f74f..2d82cfcbce5b8cae9127aa115902fa6a2f3b5123 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1635,7 +1635,7 @@ ENTRY(compat_sys_process_vm_readv_wrapper) llgfr %r6,%r6 # unsigned long llgf %r0,164(%r15) # unsigned long stg %r0,160(%r15) - jg sys_process_vm_readv + jg compat_sys_process_vm_readv ENTRY(compat_sys_process_vm_writev_wrapper) lgfr %r2,%r2 # compat_pid_t @@ -1645,4 +1645,4 @@ ENTRY(compat_sys_process_vm_writev_wrapper) llgfr %r6,%r6 # unsigned long llgf %r0,164(%r15) # unsigned long stg %r0,160(%r15) - jg sys_process_vm_writev + jg compat_sys_process_vm_writev diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index f4eb37680b9152b458938ff37b875754823be695..e4be113fbac62de564bc8566263ae40bd6b4771b 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -719,7 +719,11 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) long ret = 0; /* Do the secure computing check first. */ - secure_computing_strict(regs->gprs[2]); + if (secure_computing(regs->gprs[2])) { + /* seccomp failures shouldn't expose any additional code. */ + ret = -1; + goto out; + } /* * The sysc_tracesys code in entry.S stored the system @@ -745,6 +749,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) regs->gprs[2], regs->orig_gpr2, regs->gprs[3], regs->gprs[4], regs->gprs[5]); +out: return ret ?: regs->gprs[2]; } diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index f86c81e13c374be484f591faead417a7fb3ee572..40b57693de389b24a5b08decae1dbb1fedd47e6c 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -974,11 +974,13 @@ static void __init setup_hwcaps(void) if (MACHINE_HAS_HPAGE) elf_hwcap |= HWCAP_S390_HPAGE; +#if defined(CONFIG_64BIT) /* * 64-bit register support for 31-bit processes * HWCAP_S390_HIGH_GPRS is bit 9. */ elf_hwcap |= HWCAP_S390_HIGH_GPRS; +#endif get_cpu_id(&cpu_id); switch (cpu_id.machine) { diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c index b4a29eee41b8d59a7542ce040019a62b0e5f4be8..d0964d22adb5aecb66d94005483e04c7c282b657 100644 --- a/arch/s390/kernel/sys_s390.c +++ b/arch/s390/kernel/sys_s390.c @@ -81,11 +81,12 @@ SYSCALL_DEFINE1(s390_personality, unsigned int, personality) { unsigned int ret; - if (current->personality == PER_LINUX32 && personality == PER_LINUX) - personality = PER_LINUX32; + if (personality(current->personality) == PER_LINUX32 && + personality(personality) == PER_LINUX) + personality |= PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret &= ~PER_LINUX32; return ret; } diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index 60ee2b8837972c27d8bfb3d95dd9fc3b0b4d0091..2d37bb861faf69cf43e30971881fae771322158a 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -2,69 +2,82 @@ * User access functions based on page table walks for enhanced * system layout without hardware support. * - * Copyright IBM Corp. 2006 + * Copyright IBM Corp. 2006, 2012 * Author(s): Gerald Schaefer (gerald.schaefer@de.ibm.com) */ #include #include #include +#include #include #include #include "uaccess.h" -static inline pte_t *follow_table(struct mm_struct *mm, unsigned long addr) + +/* + * Returns kernel address for user virtual address. If the returned address is + * >= -4095 (IS_ERR_VALUE(x) returns true), a fault has occured and the address + * contains the (negative) exception code. + */ +static __always_inline unsigned long follow_table(struct mm_struct *mm, + unsigned long addr, int write) { pgd_t *pgd; pud_t *pud; pmd_t *pmd; + pte_t *ptep; pgd = pgd_offset(mm, addr); if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd))) - return (pte_t *) 0x3a; + return -0x3aUL; pud = pud_offset(pgd, addr); if (pud_none(*pud) || unlikely(pud_bad(*pud))) - return (pte_t *) 0x3b; + return -0x3bUL; pmd = pmd_offset(pud, addr); - if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) - return (pte_t *) 0x10; + if (pmd_none(*pmd)) + return -0x10UL; + if (pmd_huge(*pmd)) { + if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO)) + return -0x04UL; + return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK); + } + if (unlikely(pmd_bad(*pmd))) + return -0x10UL; + + ptep = pte_offset_map(pmd, addr); + if (!pte_present(*ptep)) + return -0x11UL; + if (write && !pte_write(*ptep)) + return -0x04UL; - return pte_offset_map(pmd, addr); + return (pte_val(*ptep) & PAGE_MASK) + (addr & ~PAGE_MASK); } static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr, size_t n, int write_user) { struct mm_struct *mm = current->mm; - unsigned long offset, pfn, done, size; - pte_t *pte; + unsigned long offset, done, size, kaddr; void *from, *to; done = 0; retry: spin_lock(&mm->page_table_lock); do { - pte = follow_table(mm, uaddr); - if ((unsigned long) pte < 0x1000) + kaddr = follow_table(mm, uaddr, write_user); + if (IS_ERR_VALUE(kaddr)) goto fault; - if (!pte_present(*pte)) { - pte = (pte_t *) 0x11; - goto fault; - } else if (write_user && !pte_write(*pte)) { - pte = (pte_t *) 0x04; - goto fault; - } - pfn = pte_pfn(*pte); - offset = uaddr & (PAGE_SIZE - 1); + offset = uaddr & ~PAGE_MASK; size = min(n - done, PAGE_SIZE - offset); if (write_user) { - to = (void *)((pfn << PAGE_SHIFT) + offset); + to = (void *) kaddr; from = kptr + done; } else { - from = (void *)((pfn << PAGE_SHIFT) + offset); + from = (void *) kaddr; to = kptr + done; } memcpy(to, from, size); @@ -75,7 +88,7 @@ static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr, return n - done; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(uaddr, (unsigned long) pte, write_user)) + if (__handle_fault(uaddr, -kaddr, write_user)) return n - done; goto retry; } @@ -84,27 +97,22 @@ static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr, * Do DAT for user address by page table walk, return kernel address. * This function needs to be called with current->mm->page_table_lock held. */ -static __always_inline unsigned long __dat_user_addr(unsigned long uaddr) +static __always_inline unsigned long __dat_user_addr(unsigned long uaddr, + int write) { struct mm_struct *mm = current->mm; - unsigned long pfn; - pte_t *pte; + unsigned long kaddr; int rc; retry: - pte = follow_table(mm, uaddr); - if ((unsigned long) pte < 0x1000) - goto fault; - if (!pte_present(*pte)) { - pte = (pte_t *) 0x11; + kaddr = follow_table(mm, uaddr, write); + if (IS_ERR_VALUE(kaddr)) goto fault; - } - pfn = pte_pfn(*pte); - return (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1)); + return kaddr; fault: spin_unlock(&mm->page_table_lock); - rc = __handle_fault(uaddr, (unsigned long) pte, 0); + rc = __handle_fault(uaddr, -kaddr, write); spin_lock(&mm->page_table_lock); if (!rc) goto retry; @@ -159,11 +167,9 @@ static size_t clear_user_pt(size_t n, void __user *to) static size_t strnlen_user_pt(size_t count, const char __user *src) { - char *addr; unsigned long uaddr = (unsigned long) src; struct mm_struct *mm = current->mm; - unsigned long offset, pfn, done, len; - pte_t *pte; + unsigned long offset, done, len, kaddr; size_t len_str; if (segment_eq(get_fs(), KERNEL_DS)) @@ -172,19 +178,13 @@ static size_t strnlen_user_pt(size_t count, const char __user *src) retry: spin_lock(&mm->page_table_lock); do { - pte = follow_table(mm, uaddr); - if ((unsigned long) pte < 0x1000) - goto fault; - if (!pte_present(*pte)) { - pte = (pte_t *) 0x11; + kaddr = follow_table(mm, uaddr, 0); + if (IS_ERR_VALUE(kaddr)) goto fault; - } - pfn = pte_pfn(*pte); - offset = uaddr & (PAGE_SIZE-1); - addr = (char *)(pfn << PAGE_SHIFT) + offset; + offset = uaddr & ~PAGE_MASK; len = min(count - done, PAGE_SIZE - offset); - len_str = strnlen(addr, len); + len_str = strnlen((char *) kaddr, len); done += len_str; uaddr += len_str; } while ((len_str == len) && (done < count)); @@ -192,7 +192,7 @@ static size_t strnlen_user_pt(size_t count, const char __user *src) return done + 1; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(uaddr, (unsigned long) pte, 0)) + if (__handle_fault(uaddr, -kaddr, 0)) return 0; goto retry; } @@ -225,11 +225,10 @@ static size_t copy_in_user_pt(size_t n, void __user *to, const void __user *from) { struct mm_struct *mm = current->mm; - unsigned long offset_from, offset_to, offset_max, pfn_from, pfn_to, - uaddr, done, size, error_code; + unsigned long offset_max, uaddr, done, size, error_code; unsigned long uaddr_from = (unsigned long) from; unsigned long uaddr_to = (unsigned long) to; - pte_t *pte_from, *pte_to; + unsigned long kaddr_to, kaddr_from; int write_user; if (segment_eq(get_fs(), KERNEL_DS)) { @@ -242,38 +241,23 @@ static size_t copy_in_user_pt(size_t n, void __user *to, do { write_user = 0; uaddr = uaddr_from; - pte_from = follow_table(mm, uaddr_from); - error_code = (unsigned long) pte_from; - if (error_code < 0x1000) - goto fault; - if (!pte_present(*pte_from)) { - error_code = 0x11; + kaddr_from = follow_table(mm, uaddr_from, 0); + error_code = kaddr_from; + if (IS_ERR_VALUE(error_code)) goto fault; - } write_user = 1; uaddr = uaddr_to; - pte_to = follow_table(mm, uaddr_to); - error_code = (unsigned long) pte_to; - if (error_code < 0x1000) - goto fault; - if (!pte_present(*pte_to)) { - error_code = 0x11; + kaddr_to = follow_table(mm, uaddr_to, 1); + error_code = (unsigned long) kaddr_to; + if (IS_ERR_VALUE(error_code)) goto fault; - } else if (!pte_write(*pte_to)) { - error_code = 0x04; - goto fault; - } - pfn_from = pte_pfn(*pte_from); - pfn_to = pte_pfn(*pte_to); - offset_from = uaddr_from & (PAGE_SIZE-1); - offset_to = uaddr_from & (PAGE_SIZE-1); - offset_max = max(offset_from, offset_to); + offset_max = max(uaddr_from & ~PAGE_MASK, + uaddr_to & ~PAGE_MASK); size = min(n - done, PAGE_SIZE - offset_max); - memcpy((void *)(pfn_to << PAGE_SHIFT) + offset_to, - (void *)(pfn_from << PAGE_SHIFT) + offset_from, size); + memcpy((void *) kaddr_to, (void *) kaddr_from, size); done += size; uaddr_from += size; uaddr_to += size; @@ -282,7 +266,7 @@ static size_t copy_in_user_pt(size_t n, void __user *to, return n - done; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(uaddr, error_code, write_user)) + if (__handle_fault(uaddr, -error_code, write_user)) return n - done; goto retry; } @@ -341,7 +325,7 @@ int futex_atomic_op_pt(int op, u32 __user *uaddr, int oparg, int *old) return __futex_atomic_op_pt(op, uaddr, oparg, old); spin_lock(¤t->mm->page_table_lock); uaddr = (u32 __force __user *) - __dat_user_addr((__force unsigned long) uaddr); + __dat_user_addr((__force unsigned long) uaddr, 1); if (!uaddr) { spin_unlock(¤t->mm->page_table_lock); return -EFAULT; @@ -378,7 +362,7 @@ int futex_atomic_cmpxchg_pt(u32 *uval, u32 __user *uaddr, return __futex_atomic_cmpxchg_pt(uval, uaddr, oldval, newval); spin_lock(¤t->mm->page_table_lock); uaddr = (u32 __force __user *) - __dat_user_addr((__force unsigned long) uaddr); + __dat_user_addr((__force unsigned long) uaddr, 1); if (!uaddr) { spin_unlock(¤t->mm->page_table_lock); return -EFAULT; diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index a1e9d69a9c90e579c2f68cea8869ae6ec26d05c4..584b93674ea43bceea2259142081ef81a02ad9aa 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -169,7 +169,7 @@ static ssize_t hw_interval_write(struct file *file, char const __user *buf, if (*offset) return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val < oprofile_min_interval) oprofile_hw_interval = oprofile_min_interval; @@ -212,7 +212,7 @@ static ssize_t hwsampler_zero_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0) return -EINVAL; @@ -243,7 +243,7 @@ static ssize_t hwsampler_kernel_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0 && val != 1) @@ -278,7 +278,7 @@ static ssize_t hwsampler_user_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0 && val != 1) @@ -317,7 +317,7 @@ static ssize_t timer_enabled_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0 && val != 1) diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 7048c03490d9a06d48cff04ed6821db9a76e08d4..fb5805745ace8160ea5074b68a51347903f6f5b0 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -57,6 +57,7 @@ config SH_7724_SOLUTION_ENGINE depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB select SND_SOC_AK4642 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select 7724 SolutionEngine if configuring for a Hitachi SH7724 evaluation board. @@ -140,6 +141,7 @@ config SH_RSK bool "Renesas Starter Kit" depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select this option if configuring for any of the RSK+ MCU evaluation platforms. @@ -159,6 +161,7 @@ config SH_SDK7786 select NO_IOPORT if !PCI select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_SRAM_POOL + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select SDK7786 if configuring for a Renesas Technology Europe SH7786-65nm board. @@ -173,6 +176,7 @@ config SH_SH7757LCR bool "SH7757LCR" depends on CPU_SUBTYPE_SH7757 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR config SH_SH7785LCR bool "SH7785LCR" @@ -206,6 +210,7 @@ config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Migo-R if configuring for the SH7722 Migo-R platform by Renesas System Solutions Asia Pte. Ltd. @@ -214,6 +219,7 @@ config SH_AP325RXA bool "AP-325RXA" depends on CPU_SUBTYPE_SH7723 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" @@ -222,6 +228,7 @@ config SH_KFR2R09 bool "KFR2R09" depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help "Kit For R2R for 2009" support. @@ -230,6 +237,7 @@ config SH_ECOVEC depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB select SND_SOC_DA7210 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "R0P7724LC0011/21RL (EcoVec)" support. @@ -305,6 +313,7 @@ config SH_MAGIC_PANEL_R2 bool "Magic Panel R2" depends on CPU_SUBTYPE_SH7720 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Magic Panel R2 if configuring for Magic Panel R2. @@ -316,6 +325,7 @@ config SH_CAYMAN config SH_POLARIS bool "SMSC Polaris" select CPU_HAS_IPR_IRQ + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7709 help Select if configuring for an SMSC Polaris development board @@ -323,6 +333,7 @@ config SH_POLARIS config SH_SH2007 bool "SH-2007 board" select NO_IOPORT + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7780 help SH-2007 is a single-board computer based around SH7780 chip @@ -334,6 +345,7 @@ config SH_SH2007 config SH_APSH4A3A bool "AP-SH4A-3A" select SH_ALPHA_BOARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7785 help Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. @@ -342,6 +354,7 @@ config SH_APSH4AD0A bool "AP-SH4AD-0A" select SH_ALPHA_BOARD select SYS_SUPPORTS_PCI + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7786 help Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c index 2823619c600672a71f0bf79854fd6c213cf45418..0a39c241628a8a797fc5e633cde90851a9953ae6 100644 --- a/arch/sh/boards/board-apsh4a3a.c +++ b/arch/sh/boards/board-apsh4a3a.c @@ -13,6 +13,8 @@ #include #include #include +#include +#include #include #include #include @@ -66,6 +68,12 @@ static struct platform_device nor_flash_device = { .resource = nor_flash_resources, }; +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -105,6 +113,8 @@ static struct platform_device *apsh4a3a_devices[] __initdata = { static int __init apsh4a3a_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(apsh4a3a_devices, ARRAY_SIZE(apsh4a3a_devices)); } diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c index b4d6292a9247bb40682c470b0cad78b0a72b1f95..92eac3a9918713a255cc742cde86a6a228bfc336 100644 --- a/arch/sh/boards/board-apsh4ad0a.c +++ b/arch/sh/boards/board-apsh4ad0a.c @@ -12,12 +12,20 @@ #include #include #include +#include +#include #include #include #include #include #include +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -56,6 +64,8 @@ static struct platform_device *apsh4ad0a_devices[] __initdata = { static int __init apsh4ad0a_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(apsh4ad0a_devices, ARRAY_SIZE(apsh4ad0a_devices)); } diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index 90568f9de3a42090b4a3e6e060e88d3b1f0f8d80..20500858b56cc6f03a5cf0a4c47eddee2540da17 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -14,6 +14,8 @@ #include #include #include +#include +#include #include #include #include @@ -24,6 +26,12 @@ #include #include +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + #define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) /* Wait until reset finished. Timeout is 100ms. */ @@ -348,6 +356,8 @@ static struct platform_device *mpr2_devices[] __initdata = { static int __init mpr2_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); } device_initcall(mpr2_devices_setup); diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c index 0978ae2e484724d74719c897a63df706fde4caba..37a08d0947278ea65c4741dbf072420aca9cb883 100644 --- a/arch/sh/boards/board-polaris.c +++ b/arch/sh/boards/board-polaris.c @@ -9,6 +9,8 @@ #include #include #include +#include +#include #include #include #include @@ -22,6 +24,12 @@ #define AREA5_WAIT_CTRL (0x1C00) #define WAIT_STATES_10 (0x7) +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -88,6 +96,8 @@ static int __init polaris_initialise(void) printk(KERN_INFO "Configuring Polaris external bus\n"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* Configure area 5 with 2 wait states */ wcr = __raw_readw(WCR2); wcr &= (~AREA5_WAIT_CTRL); diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c index b90b78f6a829cdf09d2c2e540d2f4208353c3a11..1980bb7e578003f3129c9c8d44c6c6df18699300 100644 --- a/arch/sh/boards/board-sh2007.c +++ b/arch/sh/boards/board-sh2007.c @@ -6,6 +6,8 @@ */ #include #include +#include +#include #include #include #include @@ -13,6 +15,14 @@ #include #include +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + struct smsc911x_platform_config smc911x_info = { .flags = SMSC911X_USE_32BIT, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, @@ -98,6 +108,8 @@ static struct platform_device *sh2007_devices[] __initdata = { static int __init sh2007_io_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices)); return 0; } diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 5087f8bb4cffd64aed276f0d2d3f10c34c324498..41f86702eb9ff80dfd48e178b5b1e0cf287a4fa6 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include #include #include #include @@ -199,6 +201,15 @@ static struct platform_device sh7757_eth_giga1_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + /* SH_MMCIF */ static struct resource sh_mmcif_resources[] = { [0] = { @@ -329,6 +340,9 @@ static struct spi_board_info spi_board_info[] = { static int __init sh7757lcr_devices_setup(void) { + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* RGMII (PTA) */ gpio_request(GPIO_FN_ET0_MDC, NULL); gpio_request(GPIO_FN_ET0_MDIO, NULL); diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index f33ebf447073d7800ed420e6456f28ebee043722..9e963c1d14474c0e819358145b1c0f832315d79a 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include #include #include @@ -34,6 +36,12 @@ #include #include +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct smsc911x_platform_config smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, @@ -423,6 +431,15 @@ static struct platform_device ceu_device = { }, }; +/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + static struct resource sdhi0_cn3_resources[] = { [0] = { .name = "SDHI0", @@ -544,6 +561,10 @@ static int __init ap325rxa_devices_setup(void) &ap325rxa_sdram_leave_start, &ap325rxa_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* LD3 and LD4 LEDs */ gpio_request(GPIO_PTX5, NULL); /* RUN */ gpio_direction_output(GPIO_PTX5, 1); diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 4158d70c0dea3675e44582be719b57076876bb04..64559e8af14b3e7aa3dad26d0f2dc3e07e1edf2c 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -19,6 +19,8 @@ #include #include #include +#include +#include #include #include #include @@ -242,9 +244,17 @@ static int usbhs_get_id(struct platform_device *pdev) return gpio_get_value(GPIO_PTB3); } +static void usbhs_phy_reset(struct platform_device *pdev) +{ + /* enable vbus if HOST */ + if (!gpio_get_value(GPIO_PTB3)) + gpio_set_value(GPIO_PTB5, 1); +} + static struct renesas_usbhs_platform_info usbhs_info = { .platform_callback = { .get_id = usbhs_get_id, + .phy_reset = usbhs_phy_reset, }, .driver_param = { .buswait_bwait = 4, @@ -518,10 +528,86 @@ static struct i2c_board_info ts_i2c_clients = { .irq = IRQ0, }; +static struct regulator_consumer_supply cn12_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data cn12_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers), + .consumer_supplies = cn12_power_consumers, +}; + +static struct fixed_voltage_config cn12_power_info = { + .supply_name = "CN12 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB7, + .enable_high = 1, + .init_data = &cn12_power_init_data, +}; + +static struct platform_device cn12_power = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &cn12_power_info, + }, +}; + #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) /* SDHI0 */ +static struct regulator_consumer_supply sdhi0_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data sdhi0_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers), + .consumer_supplies = sdhi0_power_consumers, +}; + +static struct fixed_voltage_config sdhi0_power_info = { + .supply_name = "CN11 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB6, + .enable_high = 1, + .init_data = &sdhi0_power_init_data, +}; + +static struct platform_device sdhi0_power = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &sdhi0_power_info, + }, +}; + static void sdhi0_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PTB6, NULL); + if (!ret) { + power_gpio = GPIO_PTB6; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * Toggle the GPIO regardless, whether we managed to grab it above or + * the fixed regulator driver did. + */ gpio_set_value(GPIO_PTB6, state); } @@ -562,13 +648,27 @@ static struct platform_device sdhi0_device = { }, }; -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) -/* SDHI1 */ -static void sdhi1_set_pwr(struct platform_device *pdev, int state) +static void cn12_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PTB7, NULL); + if (!ret) { + power_gpio = GPIO_PTB7; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * Toggle the GPIO regardless, whether we managed to grab it above or + * the fixed regulator driver did. + */ gpio_set_value(GPIO_PTB7, state); } +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) +/* SDHI1 */ static int sdhi1_get_cd(struct platform_device *pdev) { return !gpio_get_value(GPIO_PTW7); @@ -579,7 +679,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | MMC_CAP_NEEDS_POLL, - .set_pwr = sdhi1_set_pwr, + .set_pwr = cn12_set_pwr, .get_cd = sdhi1_get_cd, }; @@ -899,14 +999,9 @@ static struct platform_device vou_device = { #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) /* SH_MMCIF */ -static void mmcif_set_pwr(struct platform_device *pdev, int state) -{ - gpio_set_value(GPIO_PTB7, state); -} - static void mmcif_down_pwr(struct platform_device *pdev) { - gpio_set_value(GPIO_PTB7, 0); + cn12_set_pwr(pdev, 0); } static struct resource sh_mmcif_resources[] = { @@ -929,7 +1024,7 @@ static struct resource sh_mmcif_resources[] = { }; static struct sh_mmcif_plat_data sh_mmcif_plat = { - .set_pwr = mmcif_set_pwr, + .set_pwr = cn12_set_pwr, .down_pwr = mmcif_down_pwr, .sup_pclk = 0, /* SH7724: Max Pclk/2 */ .caps = MMC_CAP_4_BIT_DATA | @@ -960,7 +1055,9 @@ static struct platform_device *ecovec_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, + &cn12_power, #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) + &sdhi0_power, &sdhi0_device, #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, @@ -1258,8 +1355,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI0D2, NULL); gpio_request(GPIO_FN_SDHI0D1, NULL); gpio_request(GPIO_FN_SDHI0D0, NULL); - gpio_request(GPIO_PTB6, NULL); - gpio_direction_output(GPIO_PTB6, 0); #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); @@ -1288,8 +1383,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_MMC_D0, NULL); gpio_request(GPIO_FN_MMC_CLK, NULL); gpio_request(GPIO_FN_MMC_CMD, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); cn12_enabled = true; #elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) @@ -1301,8 +1394,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI1D2, NULL); gpio_request(GPIO_FN_SDHI1D1, NULL); gpio_request(GPIO_FN_SDHI1D0, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); /* Card-detect, used on CN12 with SDHI1 */ gpio_request(GPIO_PTW7, NULL); diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 43a179ce9afcb0bdcabc8f116901e27b7d4c02eb..f2a4304fbe2321996fb875b75d2bd570feda8ae6 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #include #include #include @@ -341,6 +343,13 @@ static struct platform_device kfr2r09_camera = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + static struct resource kfr2r09_sh_sdhi0_resources[] = { [0] = { .name = "SDHI0", @@ -523,6 +532,9 @@ static int __init kfr2r09_devices_setup(void) &kfr2r09_sdram_leave_start, &kfr2r09_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* enable SCIF1 serial port for YC401 console support */ gpio_request(GPIO_FN_SCIF1_RXD, NULL); gpio_request(GPIO_FN_SCIF1_TXD, NULL); diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index a8a1ca741c8599b975420dd1a796a573a33e40bc..8b73194ed2ce2ee8fe6e207d1ac614b6415e02a5 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -17,6 +17,8 @@ #include #include #include +#include +#include #include #include #include @@ -386,6 +388,13 @@ static struct platform_device migor_ceu_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + static struct resource sdhi_cn9_resources[] = { [0] = { .name = "SDHI", @@ -498,6 +507,10 @@ static int __init migor_devices_setup(void) &migor_sdram_enter_end, &migor_sdram_leave_start, &migor_sdram_leave_end); + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* Let D11 LED show STATUS0 */ gpio_request(GPIO_FN_STATUS0, NULL); diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c index 895f030070d37f95e7d2efde19047862763671d8..2685ea03b0642bf7a653b52e09b5966d037df49f 100644 --- a/arch/sh/boards/mach-rsk/setup.c +++ b/arch/sh/boards/mach-rsk/setup.c @@ -16,9 +16,17 @@ #include #include #include +#include +#include #include #include +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static const char *part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition rsk_partitions[] = { @@ -67,6 +75,8 @@ static struct platform_device *rsk_devices[] __initdata = { static int __init rsk_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(rsk_devices, ARRAY_SIZE(rsk_devices)); } diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index 27a2314f50acb7ecccc4e1a928c79b91bcd7b2c3..c29268bfd34a246d3be0c0c7cfc15b711ee529ca 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -11,6 +11,8 @@ #include #include #include +#include +#include #include #include #include @@ -38,6 +40,12 @@ static struct platform_device heartbeat_device = { .resource = &heartbeat_resource, }; +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -236,6 +244,8 @@ static void __init sdk7786_setup(char **cmdline_p) { pr_info("Renesas Technology Europe SDK7786 support:\n"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sdk7786_fpga_init(); sdk7786_nmi_init(); diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index ffbf5bc7366bce549bb4843606dabd728e624b26..35f6efa3ac0e60c8f1842ef36629e3356622d0c9 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include #include #include #include @@ -454,6 +456,15 @@ static struct platform_device sh7724_usb1_gadget_device = { .resource = sh7724_usb1_gadget_resources, }; +/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + static struct resource sdhi0_cn7_resources[] = { [0] = { .name = "SDHI0", @@ -684,6 +695,10 @@ static int __init devices_setup(void) &ms7724se_sdram_enter_end, &ms7724se_sdram_leave_start, &ms7724se_sdram_leave_end); + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* Reset Release */ fpga_out = __raw_readw(FPGA_OUT); /* bit4: NTSC_PDN, bit5: NTSC_RESET */ diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig index e7583484cc07dd3d9ab257d094f769b94446397a..95ae23fcfdd655f47b7f43d9cc877a408b31eb3e 100644 --- a/arch/sh/configs/apsh4ad0a_defconfig +++ b/arch/sh/configs/apsh4ad0a_defconfig @@ -11,7 +11,7 @@ CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y -CONFIG_CGROUP_MEM_RES_CTLR=y +CONFIG_CGROUP_MEMCG=y CONFIG_BLK_CGROUP=y CONFIG_NAMESPACES=y CONFIG_BLK_DEV_INITRD=y diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig index 8a7dd7b59c5c01f9a0adf539e87ad569f6dd678e..76a76a295d7471668dcc9b6b880533839b8e434d 100644 --- a/arch/sh/configs/sdk7786_defconfig +++ b/arch/sh/configs/sdk7786_defconfig @@ -18,8 +18,8 @@ CONFIG_CPUSETS=y # CONFIG_PROC_PID_CPUSET is not set CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y -CONFIG_CGROUP_MEM_RES_CTLR=y -CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y +CONFIG_CGROUP_MEMCG=y +CONFIG_CGROUP_MEMCG_SWAP=y CONFIG_CGROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_CGROUP=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 72c3fad7383f5fc254d90fe3d499eb4a61ce1a47..6bc30ab9fd186ea50d37dd2200d94e78092a21b6 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -11,7 +11,7 @@ CONFIG_CGROUP_DEBUG=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y -CONFIG_CGROUP_MEM_RES_CTLR=y +CONFIG_CGROUP_MEMCG=y CONFIG_RELAY=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig index 6bb413036892cb2f50af2db94649584557703b91..cd6c519f8fad7873ab7ab044e723f8b05742076b 100644 --- a/arch/sh/configs/shx3_defconfig +++ b/arch/sh/configs/shx3_defconfig @@ -13,7 +13,7 @@ CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y -CONFIG_CGROUP_MEM_RES_CTLR=y +CONFIG_CGROUP_MEMCG=y CONFIG_RELAY=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig index 8bfa4d056d7a6574e4ac7f4fa6d6b49a90001d7c..d7f89be9f474f5bc8e92cfd4fb5346bd3b600e21 100644 --- a/arch/sh/configs/urquell_defconfig +++ b/arch/sh/configs/urquell_defconfig @@ -15,8 +15,8 @@ CONFIG_CPUSETS=y # CONFIG_PROC_PID_CPUSET is not set CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y -CONFIG_CGROUP_MEM_RES_CTLR=y -CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y +CONFIG_CGROUP_MEMCG=y +CONFIG_CGROUP_MEMCG_SWAP=y CONFIG_CGROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_DEV_INITRD=y diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 4c171f13b0e8792b5f88a564c1fef52e15218c22..b2256562314298e0e63918b7f60323691e08d5b3 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -335,7 +335,7 @@ static int dmae_irq_init(void) for (n = 0; n < NR_DMAE; n++) { int i = request_irq(get_dma_error_irq(n), dma_err, - IRQF_SHARED, dmae_name[n], NULL); + IRQF_SHARED, dmae_name[n], (void *)dmae_name[n]); if (unlikely(i < 0)) { printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]); return i; diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h index 4a5350037c8f59217a06e6e6ea1c429594d51073..1b6199740e98ab7e554f1676d615983f451e56a7 100644 --- a/arch/sh/include/asm/sections.h +++ b/arch/sh/include/asm/sections.h @@ -6,7 +6,6 @@ extern long __nosave_begin, __nosave_end; extern long __machvec_start, __machvec_end; extern char __uncached_start, __uncached_end; -extern char _ebss[]; extern char __start_eh_frame[], __stop_eh_frame[]; #endif /* __ASM_SH_SECTIONS_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h index 48d14498e7740aaf76fcdafa0bae17a3ec7b6ec6..2a0ca8780f0d8c343fb87e434cf6acec73acaddb 100644 --- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h +++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h @@ -183,18 +183,30 @@ enum { GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0, GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK, GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE, - GPIO_FN_LCD_DATA23, GPIO_FN_LCD_DATA22, - GPIO_FN_LCD_DATA21, GPIO_FN_LCD_DATA20, - GPIO_FN_LCD_DATA19, GPIO_FN_LCD_DATA18, - GPIO_FN_LCD_DATA17, GPIO_FN_LCD_DATA16, - GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14, - GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12, - GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10, - GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8, - GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6, - GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4, - GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2, - GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0, + GPIO_FN_LCD_DATA23_PG23, GPIO_FN_LCD_DATA22_PG22, + GPIO_FN_LCD_DATA21_PG21, GPIO_FN_LCD_DATA20_PG20, + GPIO_FN_LCD_DATA19_PG19, GPIO_FN_LCD_DATA18_PG18, + GPIO_FN_LCD_DATA17_PG17, GPIO_FN_LCD_DATA16_PG16, + GPIO_FN_LCD_DATA15_PG15, GPIO_FN_LCD_DATA14_PG14, + GPIO_FN_LCD_DATA13_PG13, GPIO_FN_LCD_DATA12_PG12, + GPIO_FN_LCD_DATA11_PG11, GPIO_FN_LCD_DATA10_PG10, + GPIO_FN_LCD_DATA9_PG9, GPIO_FN_LCD_DATA8_PG8, + GPIO_FN_LCD_DATA7_PG7, GPIO_FN_LCD_DATA6_PG6, + GPIO_FN_LCD_DATA5_PG5, GPIO_FN_LCD_DATA4_PG4, + GPIO_FN_LCD_DATA3_PG3, GPIO_FN_LCD_DATA2_PG2, + GPIO_FN_LCD_DATA1_PG1, GPIO_FN_LCD_DATA0_PG0, + GPIO_FN_LCD_DATA23_PJ23, GPIO_FN_LCD_DATA22_PJ22, + GPIO_FN_LCD_DATA21_PJ21, GPIO_FN_LCD_DATA20_PJ20, + GPIO_FN_LCD_DATA19_PJ19, GPIO_FN_LCD_DATA18_PJ18, + GPIO_FN_LCD_DATA17_PJ17, GPIO_FN_LCD_DATA16_PJ16, + GPIO_FN_LCD_DATA15_PJ15, GPIO_FN_LCD_DATA14_PJ14, + GPIO_FN_LCD_DATA13_PJ13, GPIO_FN_LCD_DATA12_PJ12, + GPIO_FN_LCD_DATA11_PJ11, GPIO_FN_LCD_DATA10_PJ10, + GPIO_FN_LCD_DATA9_PJ9, GPIO_FN_LCD_DATA8_PJ8, + GPIO_FN_LCD_DATA7_PJ7, GPIO_FN_LCD_DATA6_PJ6, + GPIO_FN_LCD_DATA5_PJ5, GPIO_FN_LCD_DATA4_PJ4, + GPIO_FN_LCD_DATA3_PJ3, GPIO_FN_LCD_DATA2_PJ2, + GPIO_FN_LCD_DATA1_PJ1, GPIO_FN_LCD_DATA0_PJ0, GPIO_FN_LCD_M_DISP, }; diff --git a/arch/sh/include/cpu-sh4/cpu/sh7757.h b/arch/sh/include/cpu-sh4/cpu/sh7757.h index 41f9f8b9db735164fb9755d874f10576229968a5..5340f3bc1863c3890dde9a8286e05d111a8393ed 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7757.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7757.h @@ -283,5 +283,7 @@ enum { SHDMA_SLAVE_RIIC8_RX, SHDMA_SLAVE_RIIC9_TX, SHDMA_SLAVE_RIIC9_RX, + SHDMA_SLAVE_RSPI_TX, + SHDMA_SLAVE_RSPI_RX, }; #endif /* __ASM_SH7757_H__ */ diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c index f25127c46ecaff2df0e7bb7b38eca237903c7838..039e4587dd9b8cf2959e2d19159098f02136f7fd 100644 --- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c +++ b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c @@ -758,12 +758,22 @@ enum { DV_DATA3_MARK, DV_DATA2_MARK, DV_DATA1_MARK, DV_DATA0_MARK, LCD_CLK_MARK, LCD_EXTCLK_MARK, LCD_VSYNC_MARK, LCD_HSYNC_MARK, LCD_DE_MARK, - LCD_DATA23_MARK, LCD_DATA22_MARK, LCD_DATA21_MARK, LCD_DATA20_MARK, - LCD_DATA19_MARK, LCD_DATA18_MARK, LCD_DATA17_MARK, LCD_DATA16_MARK, - LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK, - LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK, - LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK, - LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK, + LCD_DATA23_PG23_MARK, LCD_DATA22_PG22_MARK, LCD_DATA21_PG21_MARK, + LCD_DATA20_PG20_MARK, LCD_DATA19_PG19_MARK, LCD_DATA18_PG18_MARK, + LCD_DATA17_PG17_MARK, LCD_DATA16_PG16_MARK, LCD_DATA15_PG15_MARK, + LCD_DATA14_PG14_MARK, LCD_DATA13_PG13_MARK, LCD_DATA12_PG12_MARK, + LCD_DATA11_PG11_MARK, LCD_DATA10_PG10_MARK, LCD_DATA9_PG9_MARK, + LCD_DATA8_PG8_MARK, LCD_DATA7_PG7_MARK, LCD_DATA6_PG6_MARK, + LCD_DATA5_PG5_MARK, LCD_DATA4_PG4_MARK, LCD_DATA3_PG3_MARK, + LCD_DATA2_PG2_MARK, LCD_DATA1_PG1_MARK, LCD_DATA0_PG0_MARK, + LCD_DATA23_PJ23_MARK, LCD_DATA22_PJ22_MARK, LCD_DATA21_PJ21_MARK, + LCD_DATA20_PJ20_MARK, LCD_DATA19_PJ19_MARK, LCD_DATA18_PJ18_MARK, + LCD_DATA17_PJ17_MARK, LCD_DATA16_PJ16_MARK, LCD_DATA15_PJ15_MARK, + LCD_DATA14_PJ14_MARK, LCD_DATA13_PJ13_MARK, LCD_DATA12_PJ12_MARK, + LCD_DATA11_PJ11_MARK, LCD_DATA10_PJ10_MARK, LCD_DATA9_PJ9_MARK, + LCD_DATA8_PJ8_MARK, LCD_DATA7_PJ7_MARK, LCD_DATA6_PJ6_MARK, + LCD_DATA5_PJ5_MARK, LCD_DATA4_PJ4_MARK, LCD_DATA3_PJ3_MARK, + LCD_DATA2_PJ2_MARK, LCD_DATA1_PJ1_MARK, LCD_DATA0_PJ0_MARK, LCD_TCON6_MARK, LCD_TCON5_MARK, LCD_TCON4_MARK, LCD_TCON3_MARK, LCD_TCON2_MARK, LCD_TCON1_MARK, LCD_TCON0_MARK, LCD_M_DISP_MARK, @@ -1036,6 +1046,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PF1_DATA, PF1MD_000), PINMUX_DATA(BACK_MARK, PF1MD_001), + PINMUX_DATA(SSL10_MARK, PF1MD_011), PINMUX_DATA(TIOC4B_MARK, PF1MD_100), PINMUX_DATA(DACK0_MARK, PF1MD_101), @@ -1049,47 +1060,50 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PG27_DATA, PG27MD_00), PINMUX_DATA(LCD_TCON2_MARK, PG27MD_10), PINMUX_DATA(LCD_EXTCLK_MARK, PG27MD_11), + PINMUX_DATA(LCD_DE_MARK, PG27MD_11), PINMUX_DATA(PG26_DATA, PG26MD_00), PINMUX_DATA(LCD_TCON1_MARK, PG26MD_10), + PINMUX_DATA(LCD_HSYNC_MARK, PG26MD_10), PINMUX_DATA(PG25_DATA, PG25MD_00), PINMUX_DATA(LCD_TCON0_MARK, PG25MD_10), + PINMUX_DATA(LCD_VSYNC_MARK, PG25MD_10), PINMUX_DATA(PG24_DATA, PG24MD_00), PINMUX_DATA(LCD_CLK_MARK, PG24MD_10), PINMUX_DATA(PG23_DATA, PG23MD_000), - PINMUX_DATA(LCD_DATA23_MARK, PG23MD_010), + PINMUX_DATA(LCD_DATA23_PG23_MARK, PG23MD_010), PINMUX_DATA(LCD_TCON6_MARK, PG23MD_011), PINMUX_DATA(TXD5_MARK, PG23MD_100), PINMUX_DATA(PG22_DATA, PG22MD_000), - PINMUX_DATA(LCD_DATA22_MARK, PG22MD_010), + PINMUX_DATA(LCD_DATA22_PG22_MARK, PG22MD_010), PINMUX_DATA(LCD_TCON5_MARK, PG22MD_011), PINMUX_DATA(RXD5_MARK, PG22MD_100), PINMUX_DATA(PG21_DATA, PG21MD_000), PINMUX_DATA(DV_DATA7_MARK, PG21MD_001), - PINMUX_DATA(LCD_DATA21_MARK, PG21MD_010), + PINMUX_DATA(LCD_DATA21_PG21_MARK, PG21MD_010), PINMUX_DATA(LCD_TCON4_MARK, PG21MD_011), PINMUX_DATA(TXD4_MARK, PG21MD_100), PINMUX_DATA(PG20_DATA, PG20MD_000), PINMUX_DATA(DV_DATA6_MARK, PG20MD_001), - PINMUX_DATA(LCD_DATA20_MARK, PG21MD_010), + PINMUX_DATA(LCD_DATA20_PG20_MARK, PG21MD_010), PINMUX_DATA(LCD_TCON3_MARK, PG20MD_011), PINMUX_DATA(RXD4_MARK, PG20MD_100), PINMUX_DATA(PG19_DATA, PG19MD_000), PINMUX_DATA(DV_DATA5_MARK, PG19MD_001), - PINMUX_DATA(LCD_DATA19_MARK, PG19MD_010), + PINMUX_DATA(LCD_DATA19_PG19_MARK, PG19MD_010), PINMUX_DATA(SPDIF_OUT_MARK, PG19MD_011), PINMUX_DATA(SCK5_MARK, PG19MD_100), PINMUX_DATA(PG18_DATA, PG18MD_000), PINMUX_DATA(DV_DATA4_MARK, PG18MD_001), - PINMUX_DATA(LCD_DATA18_MARK, PG18MD_010), + PINMUX_DATA(LCD_DATA18_PG18_MARK, PG18MD_010), PINMUX_DATA(SPDIF_IN_MARK, PG18MD_011), PINMUX_DATA(SCK4_MARK, PG18MD_100), @@ -1097,103 +1111,103 @@ static pinmux_enum_t pinmux_data[] = { // we're going with 2 bits PINMUX_DATA(PG17_DATA, PG17MD_00), PINMUX_DATA(WE3ICIOWRAHDQMUU_MARK, PG17MD_01), - PINMUX_DATA(LCD_DATA17_MARK, PG17MD_10), + PINMUX_DATA(LCD_DATA17_PG17_MARK, PG17MD_10), // TODO hardware manual has PG16 3 bits wide in reg picture and 2 bits in description // we're going with 2 bits PINMUX_DATA(PG16_DATA, PG16MD_00), PINMUX_DATA(WE2ICIORDDQMUL_MARK, PG16MD_01), - PINMUX_DATA(LCD_DATA16_MARK, PG16MD_10), + PINMUX_DATA(LCD_DATA16_PG16_MARK, PG16MD_10), PINMUX_DATA(PG15_DATA, PG15MD_00), PINMUX_DATA(D31_MARK, PG15MD_01), - PINMUX_DATA(LCD_DATA15_MARK, PG15MD_10), + PINMUX_DATA(LCD_DATA15_PG15_MARK, PG15MD_10), PINMUX_DATA(PINT7_PG_MARK, PG15MD_11), PINMUX_DATA(PG14_DATA, PG14MD_00), PINMUX_DATA(D30_MARK, PG14MD_01), - PINMUX_DATA(LCD_DATA14_MARK, PG14MD_10), + PINMUX_DATA(LCD_DATA14_PG14_MARK, PG14MD_10), PINMUX_DATA(PINT6_PG_MARK, PG14MD_11), PINMUX_DATA(PG13_DATA, PG13MD_00), PINMUX_DATA(D29_MARK, PG13MD_01), - PINMUX_DATA(LCD_DATA13_MARK, PG13MD_10), + PINMUX_DATA(LCD_DATA13_PG13_MARK, PG13MD_10), PINMUX_DATA(PINT5_PG_MARK, PG13MD_11), PINMUX_DATA(PG12_DATA, PG12MD_00), PINMUX_DATA(D28_MARK, PG12MD_01), - PINMUX_DATA(LCD_DATA12_MARK, PG12MD_10), + PINMUX_DATA(LCD_DATA12_PG12_MARK, PG12MD_10), PINMUX_DATA(PINT4_PG_MARK, PG12MD_11), PINMUX_DATA(PG11_DATA, PG11MD_000), PINMUX_DATA(D27_MARK, PG11MD_001), - PINMUX_DATA(LCD_DATA11_MARK, PG11MD_010), + PINMUX_DATA(LCD_DATA11_PG11_MARK, PG11MD_010), PINMUX_DATA(PINT3_PG_MARK, PG11MD_011), PINMUX_DATA(TIOC3D_MARK, PG11MD_100), PINMUX_DATA(PG10_DATA, PG10MD_000), PINMUX_DATA(D26_MARK, PG10MD_001), - PINMUX_DATA(LCD_DATA10_MARK, PG10MD_010), + PINMUX_DATA(LCD_DATA10_PG10_MARK, PG10MD_010), PINMUX_DATA(PINT2_PG_MARK, PG10MD_011), PINMUX_DATA(TIOC3C_MARK, PG10MD_100), PINMUX_DATA(PG9_DATA, PG9MD_000), PINMUX_DATA(D25_MARK, PG9MD_001), - PINMUX_DATA(LCD_DATA9_MARK, PG9MD_010), + PINMUX_DATA(LCD_DATA9_PG9_MARK, PG9MD_010), PINMUX_DATA(PINT1_PG_MARK, PG9MD_011), PINMUX_DATA(TIOC3B_MARK, PG9MD_100), PINMUX_DATA(PG8_DATA, PG8MD_000), PINMUX_DATA(D24_MARK, PG8MD_001), - PINMUX_DATA(LCD_DATA8_MARK, PG8MD_010), + PINMUX_DATA(LCD_DATA8_PG8_MARK, PG8MD_010), PINMUX_DATA(PINT0_PG_MARK, PG8MD_011), PINMUX_DATA(TIOC3A_MARK, PG8MD_100), PINMUX_DATA(PG7_DATA, PG7MD_000), PINMUX_DATA(D23_MARK, PG7MD_001), - PINMUX_DATA(LCD_DATA7_MARK, PG7MD_010), + PINMUX_DATA(LCD_DATA7_PG7_MARK, PG7MD_010), PINMUX_DATA(IRQ7_PG_MARK, PG7MD_011), PINMUX_DATA(TIOC2B_MARK, PG7MD_100), PINMUX_DATA(PG6_DATA, PG6MD_000), PINMUX_DATA(D22_MARK, PG6MD_001), - PINMUX_DATA(LCD_DATA6_MARK, PG6MD_010), + PINMUX_DATA(LCD_DATA6_PG6_MARK, PG6MD_010), PINMUX_DATA(IRQ6_PG_MARK, PG6MD_011), PINMUX_DATA(TIOC2A_MARK, PG6MD_100), PINMUX_DATA(PG5_DATA, PG5MD_000), PINMUX_DATA(D21_MARK, PG5MD_001), - PINMUX_DATA(LCD_DATA5_MARK, PG5MD_010), + PINMUX_DATA(LCD_DATA5_PG5_MARK, PG5MD_010), PINMUX_DATA(IRQ5_PG_MARK, PG5MD_011), PINMUX_DATA(TIOC1B_MARK, PG5MD_100), PINMUX_DATA(PG4_DATA, PG4MD_000), PINMUX_DATA(D20_MARK, PG4MD_001), - PINMUX_DATA(LCD_DATA4_MARK, PG4MD_010), + PINMUX_DATA(LCD_DATA4_PG4_MARK, PG4MD_010), PINMUX_DATA(IRQ4_PG_MARK, PG4MD_011), PINMUX_DATA(TIOC1A_MARK, PG4MD_100), PINMUX_DATA(PG3_DATA, PG3MD_000), PINMUX_DATA(D19_MARK, PG3MD_001), - PINMUX_DATA(LCD_DATA3_MARK, PG3MD_010), + PINMUX_DATA(LCD_DATA3_PG3_MARK, PG3MD_010), PINMUX_DATA(IRQ3_PG_MARK, PG3MD_011), PINMUX_DATA(TIOC0D_MARK, PG3MD_100), PINMUX_DATA(PG2_DATA, PG2MD_000), PINMUX_DATA(D18_MARK, PG2MD_001), - PINMUX_DATA(LCD_DATA2_MARK, PG2MD_010), + PINMUX_DATA(LCD_DATA2_PG2_MARK, PG2MD_010), PINMUX_DATA(IRQ2_PG_MARK, PG2MD_011), PINMUX_DATA(TIOC0C_MARK, PG2MD_100), PINMUX_DATA(PG1_DATA, PG1MD_000), PINMUX_DATA(D17_MARK, PG1MD_001), - PINMUX_DATA(LCD_DATA1_MARK, PG1MD_010), + PINMUX_DATA(LCD_DATA1_PG1_MARK, PG1MD_010), PINMUX_DATA(IRQ1_PG_MARK, PG1MD_011), PINMUX_DATA(TIOC0B_MARK, PG1MD_100), PINMUX_DATA(PG0_DATA, PG0MD_000), PINMUX_DATA(D16_MARK, PG0MD_001), - PINMUX_DATA(LCD_DATA0_MARK, PG0MD_010), + PINMUX_DATA(LCD_DATA0_PG0_MARK, PG0MD_010), PINMUX_DATA(IRQ0_PG_MARK, PG0MD_011), PINMUX_DATA(TIOC0A_MARK, PG0MD_100), @@ -1275,14 +1289,14 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ23_DATA, PJ23MD_000), PINMUX_DATA(DV_DATA23_MARK, PJ23MD_001), - PINMUX_DATA(LCD_DATA23_MARK, PJ23MD_010), + PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010), PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011), PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100), PINMUX_DATA(CTX1_MARK, PJ23MD_101), PINMUX_DATA(PJ22_DATA, PJ22MD_000), PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001), - PINMUX_DATA(LCD_DATA22_MARK, PJ22MD_010), + PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010), PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011), PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100), PINMUX_DATA(CRX1_MARK, PJ22MD_101), @@ -1290,14 +1304,14 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ21_DATA, PJ21MD_000), PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001), - PINMUX_DATA(LCD_DATA21_MARK, PJ21MD_010), + PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010), PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011), PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100), PINMUX_DATA(CTX2_MARK, PJ21MD_101), PINMUX_DATA(PJ20_DATA, PJ20MD_000), PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001), - PINMUX_DATA(LCD_DATA20_MARK, PJ20MD_010), + PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010), PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011), PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100), PINMUX_DATA(CRX2_MARK, PJ20MD_101), @@ -1305,7 +1319,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ19_DATA, PJ19MD_000), PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001), - PINMUX_DATA(LCD_DATA19_MARK, PJ19MD_010), + PINMUX_DATA(LCD_DATA19_PJ19_MARK, PJ19MD_010), PINMUX_DATA(MISO0_PJ19_MARK, PJ19MD_011), PINMUX_DATA(TIOC0D_MARK, PJ19MD_100), PINMUX_DATA(SIOFRXD_MARK, PJ19MD_101), @@ -1313,126 +1327,126 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ18_DATA, PJ18MD_000), PINMUX_DATA(DV_DATA18_MARK, PJ18MD_001), - PINMUX_DATA(LCD_DATA18_MARK, PJ18MD_010), + PINMUX_DATA(LCD_DATA18_PJ18_MARK, PJ18MD_010), PINMUX_DATA(MOSI0_PJ18_MARK, PJ18MD_011), PINMUX_DATA(TIOC0C_MARK, PJ18MD_100), PINMUX_DATA(SIOFTXD_MARK, PJ18MD_101), PINMUX_DATA(PJ17_DATA, PJ17MD_000), PINMUX_DATA(DV_DATA17_MARK, PJ17MD_001), - PINMUX_DATA(LCD_DATA17_MARK, PJ17MD_010), + PINMUX_DATA(LCD_DATA17_PJ17_MARK, PJ17MD_010), PINMUX_DATA(SSL00_PJ17_MARK, PJ17MD_011), PINMUX_DATA(TIOC0B_MARK, PJ17MD_100), PINMUX_DATA(SIOFSYNC_MARK, PJ17MD_101), PINMUX_DATA(PJ16_DATA, PJ16MD_000), PINMUX_DATA(DV_DATA16_MARK, PJ16MD_001), - PINMUX_DATA(LCD_DATA16_MARK, PJ16MD_010), + PINMUX_DATA(LCD_DATA16_PJ16_MARK, PJ16MD_010), PINMUX_DATA(RSPCK0_PJ16_MARK, PJ16MD_011), PINMUX_DATA(TIOC0A_MARK, PJ16MD_100), PINMUX_DATA(SIOFSCK_MARK, PJ16MD_101), PINMUX_DATA(PJ15_DATA, PJ15MD_000), PINMUX_DATA(DV_DATA15_MARK, PJ15MD_001), - PINMUX_DATA(LCD_DATA15_MARK, PJ15MD_010), + PINMUX_DATA(LCD_DATA15_PJ15_MARK, PJ15MD_010), PINMUX_DATA(PINT7_PJ_MARK, PJ15MD_011), PINMUX_DATA(PWM2H_MARK, PJ15MD_100), PINMUX_DATA(TXD7_MARK, PJ15MD_101), PINMUX_DATA(PJ14_DATA, PJ14MD_000), PINMUX_DATA(DV_DATA14_MARK, PJ14MD_001), - PINMUX_DATA(LCD_DATA14_MARK, PJ14MD_010), + PINMUX_DATA(LCD_DATA14_PJ14_MARK, PJ14MD_010), PINMUX_DATA(PINT6_PJ_MARK, PJ14MD_011), PINMUX_DATA(PWM2G_MARK, PJ14MD_100), PINMUX_DATA(TXD6_MARK, PJ14MD_101), PINMUX_DATA(PJ13_DATA, PJ13MD_000), PINMUX_DATA(DV_DATA13_MARK, PJ13MD_001), - PINMUX_DATA(LCD_DATA13_MARK, PJ13MD_010), + PINMUX_DATA(LCD_DATA13_PJ13_MARK, PJ13MD_010), PINMUX_DATA(PINT5_PJ_MARK, PJ13MD_011), PINMUX_DATA(PWM2F_MARK, PJ13MD_100), PINMUX_DATA(TXD5_MARK, PJ13MD_101), PINMUX_DATA(PJ12_DATA, PJ12MD_000), PINMUX_DATA(DV_DATA12_MARK, PJ12MD_001), - PINMUX_DATA(LCD_DATA12_MARK, PJ12MD_010), + PINMUX_DATA(LCD_DATA12_PJ12_MARK, PJ12MD_010), PINMUX_DATA(PINT4_PJ_MARK, PJ12MD_011), PINMUX_DATA(PWM2E_MARK, PJ12MD_100), PINMUX_DATA(SCK7_MARK, PJ12MD_101), PINMUX_DATA(PJ11_DATA, PJ11MD_000), PINMUX_DATA(DV_DATA11_MARK, PJ11MD_001), - PINMUX_DATA(LCD_DATA11_MARK, PJ11MD_010), + PINMUX_DATA(LCD_DATA11_PJ11_MARK, PJ11MD_010), PINMUX_DATA(PINT3_PJ_MARK, PJ11MD_011), PINMUX_DATA(PWM2D_MARK, PJ11MD_100), PINMUX_DATA(SCK6_MARK, PJ11MD_101), PINMUX_DATA(PJ10_DATA, PJ10MD_000), PINMUX_DATA(DV_DATA10_MARK, PJ10MD_001), - PINMUX_DATA(LCD_DATA10_MARK, PJ10MD_010), + PINMUX_DATA(LCD_DATA10_PJ10_MARK, PJ10MD_010), PINMUX_DATA(PINT2_PJ_MARK, PJ10MD_011), PINMUX_DATA(PWM2C_MARK, PJ10MD_100), PINMUX_DATA(SCK5_MARK, PJ10MD_101), PINMUX_DATA(PJ9_DATA, PJ9MD_000), PINMUX_DATA(DV_DATA9_MARK, PJ9MD_001), - PINMUX_DATA(LCD_DATA9_MARK, PJ9MD_010), + PINMUX_DATA(LCD_DATA9_PJ9_MARK, PJ9MD_010), PINMUX_DATA(PINT1_PJ_MARK, PJ9MD_011), PINMUX_DATA(PWM2B_MARK, PJ9MD_100), PINMUX_DATA(RTS5_MARK, PJ9MD_101), PINMUX_DATA(PJ8_DATA, PJ8MD_000), PINMUX_DATA(DV_DATA8_MARK, PJ8MD_001), - PINMUX_DATA(LCD_DATA8_MARK, PJ8MD_010), + PINMUX_DATA(LCD_DATA8_PJ8_MARK, PJ8MD_010), PINMUX_DATA(PINT0_PJ_MARK, PJ8MD_011), PINMUX_DATA(PWM2A_MARK, PJ8MD_100), PINMUX_DATA(CTS5_MARK, PJ8MD_101), PINMUX_DATA(PJ7_DATA, PJ7MD_000), PINMUX_DATA(DV_DATA7_MARK, PJ7MD_001), - PINMUX_DATA(LCD_DATA7_MARK, PJ7MD_010), + PINMUX_DATA(LCD_DATA7_PJ7_MARK, PJ7MD_010), PINMUX_DATA(SD_D2_MARK, PJ7MD_011), PINMUX_DATA(PWM1H_MARK, PJ7MD_100), PINMUX_DATA(PJ6_DATA, PJ6MD_000), PINMUX_DATA(DV_DATA6_MARK, PJ6MD_001), - PINMUX_DATA(LCD_DATA6_MARK, PJ6MD_010), + PINMUX_DATA(LCD_DATA6_PJ6_MARK, PJ6MD_010), PINMUX_DATA(SD_D3_MARK, PJ6MD_011), PINMUX_DATA(PWM1G_MARK, PJ6MD_100), PINMUX_DATA(PJ5_DATA, PJ5MD_000), PINMUX_DATA(DV_DATA5_MARK, PJ5MD_001), - PINMUX_DATA(LCD_DATA5_MARK, PJ5MD_010), + PINMUX_DATA(LCD_DATA5_PJ5_MARK, PJ5MD_010), PINMUX_DATA(SD_CMD_MARK, PJ5MD_011), PINMUX_DATA(PWM1F_MARK, PJ5MD_100), PINMUX_DATA(PJ4_DATA, PJ4MD_000), PINMUX_DATA(DV_DATA4_MARK, PJ4MD_001), - PINMUX_DATA(LCD_DATA4_MARK, PJ4MD_010), + PINMUX_DATA(LCD_DATA4_PJ4_MARK, PJ4MD_010), PINMUX_DATA(SD_CLK_MARK, PJ4MD_011), PINMUX_DATA(PWM1E_MARK, PJ4MD_100), PINMUX_DATA(PJ3_DATA, PJ3MD_000), PINMUX_DATA(DV_DATA3_MARK, PJ3MD_001), - PINMUX_DATA(LCD_DATA3_MARK, PJ3MD_010), + PINMUX_DATA(LCD_DATA3_PJ3_MARK, PJ3MD_010), PINMUX_DATA(SD_D0_MARK, PJ3MD_011), PINMUX_DATA(PWM1D_MARK, PJ3MD_100), PINMUX_DATA(PJ2_DATA, PJ2MD_000), PINMUX_DATA(DV_DATA2_MARK, PJ2MD_001), - PINMUX_DATA(LCD_DATA2_MARK, PJ2MD_010), + PINMUX_DATA(LCD_DATA2_PJ2_MARK, PJ2MD_010), PINMUX_DATA(SD_D1_MARK, PJ2MD_011), PINMUX_DATA(PWM1C_MARK, PJ2MD_100), PINMUX_DATA(PJ1_DATA, PJ1MD_000), PINMUX_DATA(DV_DATA1_MARK, PJ1MD_001), - PINMUX_DATA(LCD_DATA1_MARK, PJ1MD_010), + PINMUX_DATA(LCD_DATA1_PJ1_MARK, PJ1MD_010), PINMUX_DATA(SD_WP_MARK, PJ1MD_011), PINMUX_DATA(PWM1B_MARK, PJ1MD_100), PINMUX_DATA(PJ0_DATA, PJ0MD_000), PINMUX_DATA(DV_DATA0_MARK, PJ0MD_001), - PINMUX_DATA(LCD_DATA0_MARK, PJ0MD_010), + PINMUX_DATA(LCD_DATA0_PJ0_MARK, PJ0MD_010), PINMUX_DATA(SD_CD_MARK, PJ0MD_011), PINMUX_DATA(PWM1A_MARK, PJ0MD_100), }; @@ -1877,30 +1891,55 @@ static struct pinmux_gpio pinmux_gpios[] = { PINMUX_GPIO(GPIO_FN_LCD_HSYNC, LCD_HSYNC_MARK), PINMUX_GPIO(GPIO_FN_LCD_DE, LCD_DE_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA23, LCD_DATA23_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA22, LCD_DATA22_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA21, LCD_DATA21_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA20, LCD_DATA20_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA19, LCD_DATA19_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA18, LCD_DATA18_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA17, LCD_DATA17_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA16, LCD_DATA16_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA15, LCD_DATA15_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA14, LCD_DATA14_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA13, LCD_DATA13_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA12, LCD_DATA12_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA11, LCD_DATA11_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA10, LCD_DATA10_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA9, LCD_DATA9_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA8, LCD_DATA8_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA7, LCD_DATA7_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA6, LCD_DATA6_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA5, LCD_DATA5_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA4, LCD_DATA4_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA3, LCD_DATA3_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA2, LCD_DATA2_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA1, LCD_DATA1_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA0, LCD_DATA0_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA23_PG23, LCD_DATA23_PG23_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA22_PG22, LCD_DATA22_PG22_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA21_PG21, LCD_DATA21_PG21_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA20_PG20, LCD_DATA20_PG20_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA19_PG19, LCD_DATA19_PG19_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA18_PG18, LCD_DATA18_PG18_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA17_PG17, LCD_DATA17_PG17_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA16_PG16, LCD_DATA16_PG16_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA15_PG15, LCD_DATA15_PG15_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA14_PG14, LCD_DATA14_PG14_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA13_PG13, LCD_DATA13_PG13_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA12_PG12, LCD_DATA12_PG12_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA11_PG11, LCD_DATA11_PG11_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA10_PG10, LCD_DATA10_PG10_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA9_PG9, LCD_DATA9_PG9_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA8_PG8, LCD_DATA8_PG8_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA7_PG7, LCD_DATA7_PG7_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA6_PG6, LCD_DATA6_PG6_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA5_PG5, LCD_DATA5_PG5_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA4_PG4, LCD_DATA4_PG4_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA3_PG3, LCD_DATA3_PG3_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA2_PG2, LCD_DATA2_PG2_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA1_PG1, LCD_DATA1_PG1_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA0_PG0, LCD_DATA0_PG0_MARK), + + PINMUX_GPIO(GPIO_FN_LCD_DATA23_PJ23, LCD_DATA23_PJ23_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA22_PJ22, LCD_DATA22_PJ22_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA21_PJ21, LCD_DATA21_PJ21_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA20_PJ20, LCD_DATA20_PJ20_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA19_PJ19, LCD_DATA19_PJ19_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA18_PJ18, LCD_DATA18_PJ18_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA17_PJ17, LCD_DATA17_PJ17_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA16_PJ16, LCD_DATA16_PJ16_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA15_PJ15, LCD_DATA15_PJ15_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA14_PJ14, LCD_DATA14_PJ14_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA13_PJ13, LCD_DATA13_PJ13_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA12_PJ12, LCD_DATA12_PJ12_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA11_PJ11, LCD_DATA11_PJ11_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA10_PJ10, LCD_DATA10_PJ10_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA9_PJ9, LCD_DATA9_PJ9_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA8_PJ8, LCD_DATA8_PJ8_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA7_PJ7, LCD_DATA7_PJ7_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA6_PJ6, LCD_DATA6_PJ6_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA5_PJ5, LCD_DATA5_PJ5_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA4_PJ4, LCD_DATA4_PJ4_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA3_PJ3, LCD_DATA3_PJ3_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA2_PJ2, LCD_DATA2_PJ2_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA1_PJ1, LCD_DATA1_PJ1_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA0_PJ0, LCD_DATA0_PJ0_MARK), PINMUX_GPIO(GPIO_FN_LCD_M_DISP, LCD_M_DISP_MARK), }; diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index c87e78f73234f453a7fd758dd14b053e844c2408..5f30f805d2f237fe09588a9d1594e9f52a6974ba 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -334,8 +334,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]), CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]), CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]), - CLKDEV_CON_ID("usb1", &mstp_clks[HWBLK_USB1]), - CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB0]), + CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[HWBLK_USB1]), + CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[HWBLK_USB0]), CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]), diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 65786c7f5dedf1e449369dbeef90724bfd42ff5c..6a868b091c2da39c5c1d1bf9d3f9c1b6f7c6b6e7 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index a7708425afa9d955e5144c451a4d9264bc60726d..4a2f357f4df8a1b93fd285b0e0c461dbbc2897d5 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -216,6 +216,20 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x42, }, + { + .slave_id = SHDMA_SLAVE_RSPI_TX, + .addr = 0xfe480004, + .chcr = SM_INC | 0x800 | 0x40000000 | + TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc1, + }, + { + .slave_id = SHDMA_SLAVE_RSPI_RX, + .addr = 0xfe480004, + .chcr = DM_INC | 0x800 | 0x40000000 | + TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc2, + }, }; static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index b7cf6a547f117c5eeae4b69f6b1ccbcdb41b37c8..7e605b95592aea7ac767b817df3a7a61af8d4f20 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -933,7 +933,7 @@ ret_with_reschedule: pta restore_all, tr1 - movi _TIF_SIGPENDING, r8 + movi (_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), r8 and r8, r7, r8 pta work_notifysig, tr0 bne r8, ZERO, tr0 diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index f67601cb3f1f47da13a49ae4948021800b9a2f4d..b96489d8b27dde9e38630d51de4e9d7f04115c08 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -139,7 +139,7 @@ work_pending: ! r8: current_thread_info ! t: result of "tst #_TIF_NEED_RESCHED, r0" bf/s work_resched - tst #_TIF_SIGPENDING, r0 + tst #(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME), r0 work_notifysig: bt/s __restore_all mov r15, r4 diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 7b57bf1dc85510c08b40a9f88892ffacbf78c379..ebe7a7d97215e4978252af8a3512821e64148064 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -273,7 +273,7 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; bss_resource.start = virt_to_phys(__bss_start); - bss_resource.end = virt_to_phys(_ebss)-1; + bss_resource.end = virt_to_phys(__bss_stop)-1; #ifdef CONFIG_CMDLINE_OVERWRITE strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line)); diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 3896f26efa4a5c9466943dbe10bcfd87028c0011..2a0a596ebf67d948663df3009d1ca14c8b09dabc 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -19,7 +19,6 @@ EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(_ebss); EXPORT_SYMBOL(empty_zero_page); #define DECLARE_EXPORT(name) \ diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index c98905f71e28ce78a1ab06e7b310653efa2156a9..db88cbf9eafdc815d76d72784c18e4df42b361e5 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -78,7 +78,6 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_end = .; BSS_SECTION(0, PAGE_SIZE, 4) - _ebss = .; /* uClinux MTD sucks */ _end = . ; STABS_DEBUG diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S index 84a57761f17e90ee8cfdfd71dfce2b02480002a4..60164e65d66551c4375121e984fd0ea28a9525fa 100644 --- a/arch/sh/lib/mcount.S +++ b/arch/sh/lib/mcount.S @@ -39,7 +39,7 @@ * * Make sure the stack pointer contains a valid address. Valid * addresses for kernel stacks are anywhere after the bss - * (after _ebss) and anywhere in init_thread_union (init_stack). + * (after __bss_stop) and anywhere in init_thread_union (init_stack). */ #define STACK_CHECK() \ mov #(THREAD_SIZE >> 10), r0; \ @@ -60,7 +60,7 @@ cmp/hi r2, r1; \ bf stack_panic; \ \ - /* If sp > _ebss then we're OK. */ \ + /* If sp > __bss_stop then we're OK. */ \ mov.l .L_ebss, r1; \ cmp/hi r1, r15; \ bt 1f; \ @@ -70,7 +70,7 @@ cmp/hs r1, r15; \ bf stack_panic; \ \ - /* If sp > init_stack && sp < _ebss, not OK. */ \ + /* If sp > init_stack && sp < __bss_stop, not OK. */ \ add r0, r1; \ cmp/hs r1, r15; \ bt stack_panic; \ @@ -292,8 +292,6 @@ stack_panic: nop .align 2 -.L_ebss: - .long _ebss .L_init_thread_union: .long init_thread_union .Lpanic: diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 1fc25d85e5154803a50b2858af40798f22b1e7c1..3bdc1ad9a341f4418a1724dfcd8cd3ac4388a011 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -58,11 +58,15 @@ static void show_pte(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; - if (mm) + if (mm) { pgd = mm->pgd; - else + } else { pgd = get_TTB(); + if (unlikely(!pgd)) + pgd = swapper_pg_dir; + } + printk(KERN_ALERT "pgd = %p\n", pgd); pgd += pgd_index(addr); printk(KERN_ALERT "[%08lx] *pgd=%0*Lx", addr, diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c index 435e406fdec3893a24753494eea408434d6810c8..81d92fc9983b1c0244ab395b7dd81c6725d20d26 100644 --- a/arch/sparc/kernel/ldc.c +++ b/arch/sparc/kernel/ldc.c @@ -1250,14 +1250,12 @@ int ldc_bind(struct ldc_channel *lp, const char *name) snprintf(lp->rx_irq_name, LDC_IRQ_NAME_MAX, "%s RX", name); snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name); - err = request_irq(lp->cfg.rx_irq, ldc_rx, - IRQF_SAMPLE_RANDOM | IRQF_DISABLED, + err = request_irq(lp->cfg.rx_irq, ldc_rx, IRQF_DISABLED, lp->rx_irq_name, lp); if (err) return err; - err = request_irq(lp->cfg.tx_irq, ldc_tx, - IRQF_SAMPLE_RANDOM | IRQF_DISABLED, + err = request_irq(lp->cfg.tx_irq, ldc_tx, IRQF_DISABLED, lp->tx_irq_name, lp); if (err) { free_irq(lp->cfg.rx_irq, lp); diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c index 15e0a16939765148efd633663c131390daaa9893..f1ddc0d2367947d850e863aa4d0a897705074574 100644 --- a/arch/sparc/kernel/module.c +++ b/arch/sparc/kernel/module.c @@ -48,9 +48,7 @@ void *module_alloc(unsigned long size) return NULL; ret = module_map(size); - if (!ret) - ret = ERR_PTR(-ENOMEM); - else + if (ret) memset(ret, 0, size); return ret; @@ -116,6 +114,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs, v = sym->st_value + rel[i].r_addend; switch (ELF_R_TYPE(rel[i].r_info) & 0xff) { + case R_SPARC_DISP32: + v -= (Elf_Addr) location; + *loc32 = v; + break; #ifdef CONFIG_SPARC64 case R_SPARC_64: location[0] = v >> 56; @@ -128,11 +130,6 @@ int apply_relocate_add(Elf_Shdr *sechdrs, location[7] = v >> 0; break; - case R_SPARC_DISP32: - v -= (Elf_Addr) location; - *loc32 = v; - break; - case R_SPARC_WDISP19: v -= (Elf_Addr) location; *loc32 = (*loc32 & ~0x7ffff) | diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index 0dc1f578608131002da0b869dcfa7c56b4b149e3..11c6c9603e71f03995a3c17fcdf2f28957d7fa43 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -502,12 +502,12 @@ SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality) { int ret; - if (current->personality == PER_LINUX32 && - personality == PER_LINUX) - personality = PER_LINUX32; + if (personality(current->personality) == PER_LINUX32 && + personality(personality) == PER_LINUX) + personality |= PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret &= ~PER_LINUX32; return ret; } diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 6026fdd1b2eddedbf9dcff60e1079c176eb0d3d6..d58edf5fefdb6a4a3fdf484f46588cc411727c38 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -2020,6 +2020,9 @@ EXPORT_SYMBOL(_PAGE_CACHE); #ifdef CONFIG_SPARSEMEM_VMEMMAP unsigned long vmemmap_table[VMEMMAP_SIZE]; +static long __meminitdata addr_start, addr_end; +static int __meminitdata node_start; + int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) { unsigned long vstart = (unsigned long) start; @@ -2050,15 +2053,30 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) *vmem_pp = pte_base | __pa(block); - printk(KERN_INFO "[%p-%p] page_structs=%lu " - "node=%d entry=%lu/%lu\n", start, block, nr, - node, - addr >> VMEMMAP_CHUNK_SHIFT, - VMEMMAP_SIZE); + /* check to see if we have contiguous blocks */ + if (addr_end != addr || node_start != node) { + if (addr_start) + printk(KERN_DEBUG " [%lx-%lx] on node %d\n", + addr_start, addr_end-1, node_start); + addr_start = addr; + node_start = node; + } + addr_end = addr + VMEMMAP_CHUNK; } } return 0; } + +void __meminit vmemmap_populate_print_last(void) +{ + if (addr_start) { + printk(KERN_DEBUG " [%lx-%lx] on node %d\n", + addr_start, addr_end-1, node_start); + addr_start = 0; + addr_end = 0; + node_start = 0; + } +} #endif /* CONFIG_SPARSEMEM_VMEMMAP */ static void prot_init_common(unsigned long page_none, diff --git a/arch/tile/configs/tilegx_defconfig b/arch/tile/configs/tilegx_defconfig index b8d99aca54319312ef1481c4a77bf6d585beb793..0270620a16926956b6b6a6e95422a439c8b09cb2 100644 --- a/arch/tile/configs/tilegx_defconfig +++ b/arch/tile/configs/tilegx_defconfig @@ -18,8 +18,8 @@ CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y -CONFIG_CGROUP_MEM_RES_CTLR=y -CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y +CONFIG_CGROUP_MEMCG=y +CONFIG_CGROUP_MEMCG_SWAP=y CONFIG_CGROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_CGROUP=y diff --git a/arch/tile/configs/tilepro_defconfig b/arch/tile/configs/tilepro_defconfig index 2b1fd31894f10329065334a1c30cdbfaf8ac4f24..c11de27a9bcb232061be13744514589282ef68ed 100644 --- a/arch/tile/configs/tilepro_defconfig +++ b/arch/tile/configs/tilepro_defconfig @@ -17,8 +17,8 @@ CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y -CONFIG_CGROUP_MEM_RES_CTLR=y -CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y +CONFIG_CGROUP_MEMCG=y +CONFIG_CGROUP_MEMCG_SWAP=y CONFIG_CGROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_CGROUP=y diff --git a/arch/tile/include/gxio/iorpc_trio.h b/arch/tile/include/gxio/iorpc_trio.h index 15fb779920831eb38b110ec5530b1562d647171b..58105c31228b3b6643783e926b2db7886739ba01 100644 --- a/arch/tile/include/gxio/iorpc_trio.h +++ b/arch/tile/include/gxio/iorpc_trio.h @@ -25,21 +25,23 @@ #include #include -#define GXIO_TRIO_OP_ALLOC_ASIDS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1400) +#define GXIO_TRIO_OP_DEALLOC_ASID IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1400) +#define GXIO_TRIO_OP_ALLOC_ASIDS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1401) -#define GXIO_TRIO_OP_ALLOC_MEMORY_MAPS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1402) +#define GXIO_TRIO_OP_ALLOC_MEMORY_MAPS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1404) -#define GXIO_TRIO_OP_ALLOC_PIO_REGIONS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x140e) -#define GXIO_TRIO_OP_INIT_PIO_REGION_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x140f) +#define GXIO_TRIO_OP_ALLOC_PIO_REGIONS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1412) -#define GXIO_TRIO_OP_INIT_MEMORY_MAP_MMU_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1417) -#define GXIO_TRIO_OP_GET_PORT_PROPERTY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1418) -#define GXIO_TRIO_OP_CONFIG_LEGACY_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1419) -#define GXIO_TRIO_OP_CONFIG_MSI_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x141a) +#define GXIO_TRIO_OP_INIT_PIO_REGION_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1414) -#define GXIO_TRIO_OP_SET_MPS_MRS IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141c) -#define GXIO_TRIO_OP_FORCE_RC_LINK_UP IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141d) -#define GXIO_TRIO_OP_FORCE_EP_LINK_UP IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141e) +#define GXIO_TRIO_OP_INIT_MEMORY_MAP_MMU_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141e) +#define GXIO_TRIO_OP_GET_PORT_PROPERTY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141f) +#define GXIO_TRIO_OP_CONFIG_LEGACY_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1420) +#define GXIO_TRIO_OP_CONFIG_MSI_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1421) + +#define GXIO_TRIO_OP_SET_MPS_MRS IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1423) +#define GXIO_TRIO_OP_FORCE_RC_LINK_UP IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1424) +#define GXIO_TRIO_OP_FORCE_EP_LINK_UP IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1425) #define GXIO_TRIO_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) #define GXIO_TRIO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) diff --git a/arch/um/defconfig b/arch/um/defconfig index 7823ab12e6a4fb1d27406878f2e1219cd2c5d897..08107a795062c55b0e9633bdd0b2da02351e96c4 100644 --- a/arch/um/defconfig +++ b/arch/um/defconfig @@ -155,15 +155,15 @@ CONFIG_CPUSETS=y CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y -CONFIG_CGROUP_MEM_RES_CTLR=y -CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y -# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set -# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set +CONFIG_CGROUP_MEMCG=y +CONFIG_CGROUP_MEMCG_SWAP=y +# CONFIG_CGROUP_MEMCG_SWAP_ENABLED is not set +# CONFIG_CGROUP_MEMCG_KMEM is not set CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_CFS_BANDWIDTH is not set # CONFIG_RT_GROUP_SCHED is not set -CONFIG_BLK_CGROUP=m +CONFIG_BLK_CGROUP=y # CONFIG_DEBUG_BLK_CGROUP is not set # CONFIG_CHECKPOINT_RESTORE is not set CONFIG_NAMESPACES=y diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 45e248c2f43c7c1c8c618aea0eb41980fd28a046..87eebfe03c61aa7de2524ede5d3aac3128aaccb5 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -150,9 +150,11 @@ void chan_enable_winch(struct chan *chan, struct tty_struct *tty) static void line_timer_cb(struct work_struct *work) { struct line *line = container_of(work, struct line, task.work); + struct tty_struct *tty = tty_port_tty_get(&line->port); if (!line->throttled) - chan_interrupt(line, line->tty, line->driver->read_irq); + chan_interrupt(line, tty, line->driver->read_irq); + tty_kref_put(tty); } int enable_chan(struct line *line) diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index acfd0e0fd0c98cfcabe626581eea0a722c86b6ff..bbaf2c59830ac3561c432d8ac23d6f64bf62dd79 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -19,9 +19,11 @@ static irqreturn_t line_interrupt(int irq, void *data) { struct chan *chan = data; struct line *line = chan->line; + struct tty_struct *tty = tty_port_tty_get(&line->port); if (line) - chan_interrupt(line, line->tty, irq); + chan_interrupt(line, tty, irq); + tty_kref_put(tty); return IRQ_HANDLED; } @@ -219,92 +221,6 @@ void line_set_termios(struct tty_struct *tty, struct ktermios * old) /* nothing */ } -static const struct { - int cmd; - char *level; - char *name; -} tty_ioctls[] = { - /* don't print these, they flood the log ... */ - { TCGETS, NULL, "TCGETS" }, - { TCSETS, NULL, "TCSETS" }, - { TCSETSW, NULL, "TCSETSW" }, - { TCFLSH, NULL, "TCFLSH" }, - { TCSBRK, NULL, "TCSBRK" }, - - /* general tty stuff */ - { TCSETSF, KERN_DEBUG, "TCSETSF" }, - { TCGETA, KERN_DEBUG, "TCGETA" }, - { TIOCMGET, KERN_DEBUG, "TIOCMGET" }, - { TCSBRKP, KERN_DEBUG, "TCSBRKP" }, - { TIOCMSET, KERN_DEBUG, "TIOCMSET" }, - - /* linux-specific ones */ - { TIOCLINUX, KERN_INFO, "TIOCLINUX" }, - { KDGKBMODE, KERN_INFO, "KDGKBMODE" }, - { KDGKBTYPE, KERN_INFO, "KDGKBTYPE" }, - { KDSIGACCEPT, KERN_INFO, "KDSIGACCEPT" }, -}; - -int line_ioctl(struct tty_struct *tty, unsigned int cmd, - unsigned long arg) -{ - int ret; - int i; - - ret = 0; - switch(cmd) { -#ifdef TIOCGETP - case TIOCGETP: - case TIOCSETP: - case TIOCSETN: -#endif -#ifdef TIOCGETC - case TIOCGETC: - case TIOCSETC: -#endif -#ifdef TIOCGLTC - case TIOCGLTC: - case TIOCSLTC: -#endif - /* Note: these are out of date as we now have TCGETS2 etc but this - whole lot should probably go away */ - case TCGETS: - case TCSETSF: - case TCSETSW: - case TCSETS: - case TCGETA: - case TCSETAF: - case TCSETAW: - case TCSETA: - case TCXONC: - case TCFLSH: - case TIOCOUTQ: - case TIOCINQ: - case TIOCGLCKTRMIOS: - case TIOCSLCKTRMIOS: - case TIOCPKT: - case TIOCGSOFTCAR: - case TIOCSSOFTCAR: - return -ENOIOCTLCMD; -#if 0 - case TCwhatever: - /* do something */ - break; -#endif - default: - for (i = 0; i < ARRAY_SIZE(tty_ioctls); i++) - if (cmd == tty_ioctls[i].cmd) - break; - if (i == ARRAY_SIZE(tty_ioctls)) { - printk(KERN_ERR "%s: %s: unknown ioctl: 0x%x\n", - __func__, tty->name, cmd); - } - ret = -ENOIOCTLCMD; - break; - } - return ret; -} - void line_throttle(struct tty_struct *tty) { struct line *line = tty->driver_data; @@ -333,7 +249,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data) { struct chan *chan = data; struct line *line = chan->line; - struct tty_struct *tty = line->tty; + struct tty_struct *tty; int err; /* @@ -352,68 +268,42 @@ static irqreturn_t line_write_interrupt(int irq, void *data) } spin_unlock(&line->lock); + tty = tty_port_tty_get(&line->port); if (tty == NULL) return IRQ_NONE; tty_wakeup(tty); + tty_kref_put(tty); + return IRQ_HANDLED; } int line_setup_irq(int fd, int input, int output, struct line *line, void *data) { const struct line_driver *driver = line->driver; - int err = 0, flags = IRQF_SHARED | IRQF_SAMPLE_RANDOM; + int err = 0; if (input) err = um_request_irq(driver->read_irq, fd, IRQ_READ, - line_interrupt, flags, - driver->read_irq_name, data); + line_interrupt, IRQF_SHARED, + driver->read_irq_name, data); if (err) return err; if (output) err = um_request_irq(driver->write_irq, fd, IRQ_WRITE, - line_write_interrupt, flags, - driver->write_irq_name, data); + line_write_interrupt, IRQF_SHARED, + driver->write_irq_name, data); return err; } -/* - * Normally, a driver like this can rely mostly on the tty layer - * locking, particularly when it comes to the driver structure. - * However, in this case, mconsole requests can come in "from the - * side", and race with opens and closes. - * - * mconsole config requests will want to be sure the device isn't in - * use, and get_config, open, and close will want a stable - * configuration. The checking and modification of the configuration - * is done under a spinlock. Checking whether the device is in use is - * line->tty->count > 1, also under the spinlock. - * - * line->count serves to decide whether the device should be enabled or - * disabled on the host. If it's equal to 0, then we are doing the - * first open or last close. Otherwise, open and close just return. - */ - -int line_open(struct line *lines, struct tty_struct *tty) +static int line_activate(struct tty_port *port, struct tty_struct *tty) { - struct line *line = &lines[tty->index]; - int err = -ENODEV; - - mutex_lock(&line->count_lock); - if (!line->valid) - goto out_unlock; - - err = 0; - if (line->count++) - goto out_unlock; - - BUG_ON(tty->driver_data); - tty->driver_data = line; - line->tty = tty; + int ret; + struct line *line = tty->driver_data; - err = enable_chan(line); - if (err) /* line_close() will be called by our caller */ - goto out_unlock; + ret = enable_chan(line); + if (ret) + return ret; if (!line->sigio) { chan_enable_winch(line->chan_out, tty); @@ -421,44 +311,60 @@ int line_open(struct line *lines, struct tty_struct *tty) } chan_window_size(line, &tty->winsize.ws_row, - &tty->winsize.ws_col); -out_unlock: - mutex_unlock(&line->count_lock); - return err; + &tty->winsize.ws_col); + + return 0; } -static void unregister_winch(struct tty_struct *tty); +static const struct tty_port_operations line_port_ops = { + .activate = line_activate, +}; -void line_close(struct tty_struct *tty, struct file * filp) +int line_open(struct tty_struct *tty, struct file *filp) { struct line *line = tty->driver_data; - /* - * If line_open fails (and tty->driver_data is never set), - * tty_open will call line_close. So just return in this case. - */ - if (line == NULL) - return; + return tty_port_open(&line->port, tty, filp); +} - /* We ignore the error anyway! */ - flush_buffer(line); +int line_install(struct tty_driver *driver, struct tty_struct *tty, + struct line *line) +{ + int ret; - mutex_lock(&line->count_lock); - BUG_ON(!line->valid); + ret = tty_standard_install(driver, tty); + if (ret) + return ret; - if (--line->count) - goto out_unlock; + tty->driver_data = line; - line->tty = NULL; - tty->driver_data = NULL; + return 0; +} + +static void unregister_winch(struct tty_struct *tty); + +void line_cleanup(struct tty_struct *tty) +{ + struct line *line = tty->driver_data; if (line->sigio) { unregister_winch(tty); line->sigio = 0; } +} + +void line_close(struct tty_struct *tty, struct file * filp) +{ + struct line *line = tty->driver_data; -out_unlock: - mutex_unlock(&line->count_lock); + tty_port_close(&line->port, tty, filp); +} + +void line_hangup(struct tty_struct *tty) +{ + struct line *line = tty->driver_data; + + tty_port_hangup(&line->port); } void close_lines(struct line *lines, int nlines) @@ -476,9 +382,7 @@ int setup_one_line(struct line *lines, int n, char *init, struct tty_driver *driver = line->driver->driver; int err = -EINVAL; - mutex_lock(&line->count_lock); - - if (line->count) { + if (line->port.count) { *error_out = "Device is already open"; goto out; } @@ -519,7 +423,6 @@ int setup_one_line(struct line *lines, int n, char *init, } } out: - mutex_unlock(&line->count_lock); return err; } @@ -607,13 +510,17 @@ int line_get_config(char *name, struct line *lines, unsigned int num, char *str, line = &lines[dev]; - mutex_lock(&line->count_lock); if (!line->valid) CONFIG_CHUNK(str, size, n, "none", 1); - else if (line->tty == NULL) - CONFIG_CHUNK(str, size, n, line->init_str, 1); - else n = chan_config_string(line, str, size, error_out); - mutex_unlock(&line->count_lock); + else { + struct tty_struct *tty = tty_port_tty_get(&line->port); + if (tty == NULL) { + CONFIG_CHUNK(str, size, n, line->init_str, 1); + } else { + n = chan_config_string(line, str, size, error_out); + tty_kref_put(tty); + } + } return n; } @@ -663,8 +570,9 @@ int register_lines(struct line_driver *line_driver, driver->init_termios = tty_std_termios; for (i = 0; i < nlines; i++) { + tty_port_init(&lines[i].port); + lines[i].port.ops = &line_port_ops; spin_lock_init(&lines[i].lock); - mutex_init(&lines[i].count_lock); lines[i].driver = line_driver; INIT_LIST_HEAD(&lines[i].chan_list); } @@ -779,8 +687,7 @@ void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty, .stack = stack }); if (um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, - "winch", winch) < 0) { + IRQF_SHARED, "winch", winch) < 0) { printk(KERN_ERR "register_winch_irq - failed to register " "IRQ\n"); goto out_free; diff --git a/arch/um/drivers/line.h b/arch/um/drivers/line.h index 0a1834719dbaff1e0d6afa6333c1df3a4f8274db..bae95611e7abc3faa1ccaba25f052cfa4b60b246 100644 --- a/arch/um/drivers/line.h +++ b/arch/um/drivers/line.h @@ -32,9 +32,7 @@ struct line_driver { }; struct line { - struct tty_struct *tty; - struct mutex count_lock; - unsigned long count; + struct tty_port port; int valid; char *init_str; @@ -59,7 +57,11 @@ struct line { }; extern void line_close(struct tty_struct *tty, struct file * filp); -extern int line_open(struct line *lines, struct tty_struct *tty); +extern int line_open(struct tty_struct *tty, struct file *filp); +extern int line_install(struct tty_driver *driver, struct tty_struct *tty, + struct line *line); +extern void line_cleanup(struct tty_struct *tty); +extern void line_hangup(struct tty_struct *tty); extern int line_setup(char **conf, unsigned nlines, char **def, char *init, char *name); extern int line_write(struct tty_struct *tty, const unsigned char *buf, @@ -70,8 +72,6 @@ extern int line_chars_in_buffer(struct tty_struct *tty); extern void line_flush_buffer(struct tty_struct *tty); extern void line_flush_chars(struct tty_struct *tty); extern int line_write_room(struct tty_struct *tty); -extern int line_ioctl(struct tty_struct *tty, unsigned int cmd, - unsigned long arg); extern void line_throttle(struct tty_struct *tty); extern void line_unthrottle(struct tty_struct *tty); diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index 43b39d61b538698229a23f654b7fb44a335187b3..664a60e8dfb442fe2cb75c1ed5ba388a7bdb42b0 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -774,8 +774,7 @@ static int __init mconsole_init(void) register_reboot_notifier(&reboot_notifier); err = um_request_irq(MCONSOLE_IRQ, sock, IRQ_READ, mconsole_interrupt, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, - "mconsole", (void *)sock); + IRQF_SHARED, "mconsole", (void *)sock); if (err) { printk(KERN_ERR "Failed to get IRQ for management console\n"); goto out; diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c index 11866ffd45a988c24da3b38c07d806f2f5f2e1c5..1d83d50236e17a6a56e122aad6763b70b9222f9d 100644 --- a/arch/um/drivers/port_kern.c +++ b/arch/um/drivers/port_kern.c @@ -100,8 +100,7 @@ static int port_accept(struct port_list *port) .port = port }); if (um_request_irq(TELNETD_IRQ, socket[0], IRQ_READ, pipe_interrupt, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, - "telnetd", conn)) { + IRQF_SHARED, "telnetd", conn)) { printk(KERN_ERR "port_accept : failed to get IRQ for " "telnetd\n"); goto out_free; @@ -184,8 +183,7 @@ void *port_data(int port_num) } if (um_request_irq(ACCEPT_IRQ, fd, IRQ_READ, port_interrupt, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, - "port", port)) { + IRQF_SHARED, "port", port)) { printk(KERN_ERR "Failed to get IRQ for port %d\n", port_num); goto out_close; } diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index b25296e6218ade5fdeee1d3dff4f369bce5accbe..e32c6aa6396fa2df733b807b9252fa9acd755281 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -131,8 +131,7 @@ static int __init rng_init (void) random_fd = err; err = um_request_irq(RANDOM_IRQ, random_fd, IRQ_READ, random_interrupt, - IRQF_SAMPLE_RANDOM, "random", - NULL); + 0, "random", NULL); if (err) goto err_out_cleanup_hw; diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index e09801a1327bb9ae10d33d8e55def730c1b4fd58..7e86f00701231f665f806b657c6c94f62fc75d42 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -87,40 +87,13 @@ static int ssl_remove(int n, char **error_out) error_out); } -static int ssl_open(struct tty_struct *tty, struct file *filp) -{ - int err = line_open(serial_lines, tty); - - if (err) - printk(KERN_ERR "Failed to open serial line %d, err = %d\n", - tty->index, err); - - return err; -} - -#if 0 -static void ssl_flush_buffer(struct tty_struct *tty) -{ - return; -} - -static void ssl_stop(struct tty_struct *tty) -{ - printk(KERN_ERR "Someone should implement ssl_stop\n"); -} - -static void ssl_start(struct tty_struct *tty) -{ - printk(KERN_ERR "Someone should implement ssl_start\n"); -} - -void ssl_hangup(struct tty_struct *tty) +static int ssl_install(struct tty_driver *driver, struct tty_struct *tty) { + return line_install(driver, tty, &serial_lines[tty->index]); } -#endif static const struct tty_operations ssl_ops = { - .open = ssl_open, + .open = line_open, .close = line_close, .write = line_write, .put_char = line_put_char, @@ -129,14 +102,11 @@ static const struct tty_operations ssl_ops = { .flush_buffer = line_flush_buffer, .flush_chars = line_flush_chars, .set_termios = line_set_termios, - .ioctl = line_ioctl, .throttle = line_throttle, .unthrottle = line_unthrottle, -#if 0 - .stop = ssl_stop, - .start = ssl_start, - .hangup = ssl_hangup, -#endif + .install = ssl_install, + .cleanup = line_cleanup, + .hangup = line_hangup, }; /* Changed by ssl_init and referenced by ssl_exit, which are both serialized diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 7663541c372ee06e5be7097ff2eba2e275f86a23..929b99a261f3a538c2ac25845ab33c8d11dbd96b 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -89,21 +89,17 @@ static int con_remove(int n, char **error_out) return line_remove(vts, ARRAY_SIZE(vts), n, error_out); } -static int con_open(struct tty_struct *tty, struct file *filp) -{ - int err = line_open(vts, tty); - if (err) - printk(KERN_ERR "Failed to open console %d, err = %d\n", - tty->index, err); - - return err; -} - /* Set in an initcall, checked in an exitcall */ static int con_init_done = 0; +static int con_install(struct tty_driver *driver, struct tty_struct *tty) +{ + return line_install(driver, tty, &vts[tty->index]); +} + static const struct tty_operations console_ops = { - .open = con_open, + .open = line_open, + .install = con_install, .close = line_close, .write = line_write, .put_char = line_put_char, @@ -112,9 +108,10 @@ static const struct tty_operations console_ops = { .flush_buffer = line_flush_buffer, .flush_chars = line_flush_chars, .set_termios = line_set_termios, - .ioctl = line_ioctl, .throttle = line_throttle, .unthrottle = line_unthrottle, + .cleanup = line_cleanup, + .hangup = line_hangup, }; static void uml_console_write(struct console *console, const char *string, diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 20505cafa29904f176b735f98cdc94eeaac50181..0643e5bc9f41310b78f5b8cc36cc7abb6175e4f3 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -514,7 +514,7 @@ static inline int ubd_file_size(struct ubd *ubd_dev, __u64 *size_out) goto out; } - fd = os_open_file(ubd_dev->file, global_openflags, 0); + fd = os_open_file(ubd_dev->file, of_read(OPENFLAGS()), 0); if (fd < 0) return fd; diff --git a/arch/um/drivers/xterm_kern.c b/arch/um/drivers/xterm_kern.c index b68bbe269e018cb00154781eec3706060e1b1c8d..e3031e69445d133d94a0e335dfd485bd04c17a4b 100644 --- a/arch/um/drivers/xterm_kern.c +++ b/arch/um/drivers/xterm_kern.c @@ -50,8 +50,7 @@ int xterm_fd(int socket, int *pid_out) init_completion(&data->ready); err = um_request_irq(XTERM_IRQ, socket, IRQ_READ, xterm_interrupt, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, - "xterm", data); + IRQF_SHARED, "xterm", data); if (err) { printk(KERN_ERR "xterm_fd : failed to get IRQ for xterm, " "err = %d\n", err); diff --git a/arch/um/include/asm/processor-generic.h b/arch/um/include/asm/processor-generic.h index 69f1c57a8d0dc895c727b74e1a53f8acd6c94a4c..33a6a2423bd25638a2b93f20fdc77bcf6e0f1737 100644 --- a/arch/um/include/asm/processor-generic.h +++ b/arch/um/include/asm/processor-generic.h @@ -20,14 +20,6 @@ struct mm_struct; struct thread_struct { struct task_struct *saved_task; - /* - * This flag is set to 1 before calling do_fork (and analyzed in - * copy_thread) to mark that we are begin called from userspace (fork / - * vfork / clone), and reset to 0 after. It is left to 0 when called - * from kernelspace (i.e. kernel_thread() or fork_idle(), - * as of 2.6.11). - */ - int forking; struct pt_regs regs; int singlestep_syscall; void *fault_addr; @@ -58,7 +50,6 @@ struct thread_struct { #define INIT_THREAD \ { \ - .forking = 0, \ .regs = EMPTY_REGS, \ .fault_addr = NULL, \ .prev_sched = NULL, \ diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h index e786a6a3ec5e88c3ae6fc61d2036096d79304fcc..442f1d025dc2f838096eaa5a77c066933a1db58d 100644 --- a/arch/um/include/asm/ptrace-generic.h +++ b/arch/um/include/asm/ptrace-generic.h @@ -37,6 +37,8 @@ extern int putreg(struct task_struct *child, int regno, unsigned long value); extern int arch_copy_tls(struct task_struct *new); extern void clear_flushed_tls(struct task_struct *task); +extern void syscall_trace_enter(struct pt_regs *regs); +extern void syscall_trace_leave(struct pt_regs *regs); #endif diff --git a/arch/um/include/shared/as-layout.h b/arch/um/include/shared/as-layout.h index 896e16602176026d4cbb8a0030f88b5f9ac3c23e..86daa546181568fb10b860c76f428b1f1a12dc47 100644 --- a/arch/um/include/shared/as-layout.h +++ b/arch/um/include/shared/as-layout.h @@ -60,7 +60,8 @@ extern unsigned long host_task_size; extern int linux_main(int argc, char **argv); -extern void (*sig_info[])(int, struct uml_pt_regs *); +struct siginfo; +extern void (*sig_info[])(int, struct siginfo *si, struct uml_pt_regs *); #endif diff --git a/arch/um/include/shared/common-offsets.h b/arch/um/include/shared/common-offsets.h index 40db8f71deaef4eb19c10a09e4f01d51078d3c8d..2df313b6a586c82b6e1dec743d174b0ddd190a9e 100644 --- a/arch/um/include/shared/common-offsets.h +++ b/arch/um/include/shared/common-offsets.h @@ -7,16 +7,6 @@ DEFINE(UM_KERN_PAGE_MASK, PAGE_MASK); DEFINE(UM_KERN_PAGE_SHIFT, PAGE_SHIFT); DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC); -DEFINE_STR(UM_KERN_EMERG, KERN_EMERG); -DEFINE_STR(UM_KERN_ALERT, KERN_ALERT); -DEFINE_STR(UM_KERN_CRIT, KERN_CRIT); -DEFINE_STR(UM_KERN_ERR, KERN_ERR); -DEFINE_STR(UM_KERN_WARNING, KERN_WARNING); -DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE); -DEFINE_STR(UM_KERN_INFO, KERN_INFO); -DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG); -DEFINE_STR(UM_KERN_CONT, KERN_CONT); - DEFINE(UM_ELF_CLASS, ELF_CLASS); DEFINE(UM_ELFCLASS32, ELFCLASS32); DEFINE(UM_ELFCLASS64, ELFCLASS64); diff --git a/arch/um/include/shared/irq_user.h b/arch/um/include/shared/irq_user.h index c6c784df2673a93e7ad0d794a9e1ff38824c0791..2b6d703925b57c8ea862ef7fd1706c8770f42396 100644 --- a/arch/um/include/shared/irq_user.h +++ b/arch/um/include/shared/irq_user.h @@ -20,7 +20,8 @@ struct irq_fd { enum { IRQ_READ, IRQ_WRITE }; -extern void sigio_handler(int sig, struct uml_pt_regs *regs); +struct siginfo; +extern void sigio_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs); extern void free_irq_by_fd(int fd); extern void reactivate_fd(int fd, int irqnum); extern void deactivate_fd(int fd, int irqnum); diff --git a/arch/um/include/shared/kern_util.h b/arch/um/include/shared/kern_util.h index 00965d06d2ca2022f6514c6506fa7e2fbf9adffa..af6b6dc868bab6b82e1351250edcc1d62f873285 100644 --- a/arch/um/include/shared/kern_util.h +++ b/arch/um/include/shared/kern_util.h @@ -9,6 +9,8 @@ #include "sysdep/ptrace.h" #include "sysdep/faultinfo.h" +struct siginfo; + extern int uml_exitcode; extern int ncpus; @@ -22,7 +24,7 @@ extern void free_stack(unsigned long stack, int order); extern int do_signal(void); extern void interrupt_end(void); -extern void relay_signal(int sig, struct uml_pt_regs *regs); +extern void relay_signal(int sig, struct siginfo *si, struct uml_pt_regs *regs); extern unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, struct uml_pt_regs *regs); @@ -33,9 +35,8 @@ extern unsigned int do_IRQ(int irq, struct uml_pt_regs *regs); extern int smp_sigio_handler(void); extern void initial_thread_cb(void (*proc)(void *), void *arg); extern int is_syscall(unsigned long addr); -extern void timer_handler(int sig, struct uml_pt_regs *regs); -extern void timer_handler(int sig, struct uml_pt_regs *regs); +extern void timer_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs); extern int start_uml(void); extern void paging_init(void); @@ -59,9 +60,9 @@ extern unsigned long from_irq_stack(int nested); extern void syscall_trace(struct uml_pt_regs *regs, int entryexit); extern int singlestepping(void *t); -extern void segv_handler(int sig, struct uml_pt_regs *regs); -extern void bus_handler(int sig, struct uml_pt_regs *regs); -extern void winch(int sig, struct uml_pt_regs *regs); +extern void segv_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs); +extern void bus_handler(int sig, struct siginfo *si, struct uml_pt_regs *regs); +extern void winch(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs); extern void fatal_sigsegv(void) __attribute__ ((noreturn)); diff --git a/arch/um/include/shared/user.h b/arch/um/include/shared/user.h index 4fa82c055aab8d53576b06787aa1033644a16697..cef0685633369c05b6020f6071ae1a2ff094173a 100644 --- a/arch/um/include/shared/user.h +++ b/arch/um/include/shared/user.h @@ -26,6 +26,17 @@ extern void panic(const char *fmt, ...) __attribute__ ((format (printf, 1, 2))); +/* Requires preincluding include/linux/kern_levels.h */ +#define UM_KERN_EMERG KERN_EMERG +#define UM_KERN_ALERT KERN_ALERT +#define UM_KERN_CRIT KERN_CRIT +#define UM_KERN_ERR KERN_ERR +#define UM_KERN_WARNING KERN_WARNING +#define UM_KERN_NOTICE KERN_NOTICE +#define UM_KERN_INFO KERN_INFO +#define UM_KERN_DEBUG KERN_DEBUG +#define UM_KERN_CONT KERN_CONT + #ifdef UML_CONFIG_PRINTK extern int printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 2))); diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c index 6cade9366364d03f2fd58e2cee85336ffdea56e5..8c82786da823df2cdf53ad9361b9b950d85018c7 100644 --- a/arch/um/kernel/exec.c +++ b/arch/um/kernel/exec.c @@ -39,34 +39,21 @@ void flush_thread(void) void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp) { + get_safe_registers(regs->regs.gp, regs->regs.fp); PT_REGS_IP(regs) = eip; PT_REGS_SP(regs) = esp; -} -EXPORT_SYMBOL(start_thread); - -static long execve1(const char *file, - const char __user *const __user *argv, - const char __user *const __user *env) -{ - long error; - - error = do_execve(file, argv, env, ¤t->thread.regs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; + current->ptrace &= ~PT_DTRACE; #ifdef SUBARCH_EXECVE1 - SUBARCH_EXECVE1(¤t->thread.regs.regs); + SUBARCH_EXECVE1(regs->regs); #endif - task_unlock(current); - } - return error; } +EXPORT_SYMBOL(start_thread); long um_execve(const char *file, const char __user *const __user *argv, const char __user *const __user *env) { long err; - err = execve1(file, argv, env); + err = do_execve(file, argv, env, ¤t->thread.regs); if (!err) UML_LONGJMP(current->thread.exec_buf, 1); return err; @@ -81,7 +68,7 @@ long sys_execve(const char __user *file, const char __user *const __user *argv, filename = getname(file); error = PTR_ERR(filename); if (IS_ERR(filename)) goto out; - error = execve1(filename, argv, env); + error = do_execve(filename, argv, env, ¤t->thread.regs); putname(filename); out: return error; diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index 00506c3d5d6e5ce9cabe83fa7163c67fdec4eb7f..9883026f0730ca89f7acde365d51a26e2929d933 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -30,7 +30,7 @@ static struct irq_fd **last_irq_ptr = &active_fds; extern void free_irqs(void); -void sigio_handler(int sig, struct uml_pt_regs *regs) +void sigio_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs) { struct irq_fd *irq_fd; int n; diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index ccb9a9d283f165760b20fec6bb3b821f814b0a37..c5f5afa5074571c2b5872bc157c9f199a80c9f5b 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -151,12 +151,10 @@ void new_thread_handler(void) * 0 if it just exits */ n = run_kernel_thread(fn, arg, ¤t->thread.exec_buf); - if (n == 1) { - /* Handle any immediate reschedules or signals */ - interrupt_end(); + if (n == 1) userspace(¤t->thread.regs.regs); - } - else do_exit(0); + else + do_exit(0); } /* Called magically, see new_thread_handler above */ @@ -175,9 +173,6 @@ void fork_handler(void) current->thread.prev_sched = NULL; - /* Handle any immediate reschedules or signals */ - interrupt_end(); - userspace(¤t->thread.regs.regs); } @@ -186,22 +181,22 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, struct pt_regs *regs) { void (*handler)(void); + int kthread = current->flags & PF_KTHREAD; int ret = 0; p->thread = (struct thread_struct) INIT_THREAD; - if (current->thread.forking) { + if (!kthread) { memcpy(&p->thread.regs.regs, ®s->regs, sizeof(p->thread.regs.regs)); - UPT_SET_SYSCALL_RETURN(&p->thread.regs.regs, 0); + PT_REGS_SET_SYSCALL_RETURN(&p->thread.regs, 0); if (sp != 0) REGS_SP(p->thread.regs.regs.gp) = sp; handler = fork_handler; arch_copy_thread(¤t->thread.arch, &p->thread.arch); - } - else { + } else { get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp); p->thread.request.u.thread = current->thread.request.u.thread; handler = new_thread_handler; @@ -209,7 +204,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, new_thread(task_stack_page(p), &p->thread.switch_buf, handler); - if (current->thread.forking) { + if (!kthread) { clear_flushed_tls(p); /* diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 06b190390505f848a095648d2c555bd9d996604d..694d551c88996dbee7c974487b9299c9f1efc8fe 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -3,11 +3,12 @@ * Licensed under the GPL */ -#include "linux/audit.h" -#include "linux/ptrace.h" -#include "linux/sched.h" -#include "asm/uaccess.h" -#include "skas_ptrace.h" +#include +#include +#include +#include +#include +#include @@ -162,48 +163,36 @@ static void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs, * XXX Check PT_DTRACE vs TIF_SINGLESTEP for singlestepping check and * PT_PTRACED vs TIF_SYSCALL_TRACE for syscall tracing check */ -void syscall_trace(struct uml_pt_regs *regs, int entryexit) +void syscall_trace_enter(struct pt_regs *regs) { - int is_singlestep = (current->ptrace & PT_DTRACE) && entryexit; - int tracesysgood; - - if (!entryexit) - audit_syscall_entry(HOST_AUDIT_ARCH, - UPT_SYSCALL_NR(regs), - UPT_SYSCALL_ARG1(regs), - UPT_SYSCALL_ARG2(regs), - UPT_SYSCALL_ARG3(regs), - UPT_SYSCALL_ARG4(regs)); - else - audit_syscall_exit(regs); - - /* Fake a debug trap */ - if (is_singlestep) - send_sigtrap(current, regs, 0); + audit_syscall_entry(HOST_AUDIT_ARCH, + UPT_SYSCALL_NR(®s->regs), + UPT_SYSCALL_ARG1(®s->regs), + UPT_SYSCALL_ARG2(®s->regs), + UPT_SYSCALL_ARG3(®s->regs), + UPT_SYSCALL_ARG4(®s->regs)); if (!test_thread_flag(TIF_SYSCALL_TRACE)) return; - if (!(current->ptrace & PT_PTRACED)) - return; + tracehook_report_syscall_entry(regs); +} - /* - * the 0x80 provides a way for the tracing parent to distinguish - * between a syscall stop and SIGTRAP delivery - */ - tracesysgood = (current->ptrace & PT_TRACESYSGOOD); - ptrace_notify(SIGTRAP | (tracesysgood ? 0x80 : 0)); +void syscall_trace_leave(struct pt_regs *regs) +{ + int ptraced = current->ptrace; - if (entryexit) /* force do_signal() --> is_syscall() */ - set_thread_flag(TIF_SIGPENDING); + audit_syscall_exit(regs); - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } + /* Fake a debug trap */ + if (ptraced & PT_DTRACE) + send_sigtrap(current, ®s->regs, 0); + + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + + tracehook_report_syscall_exit(regs, 0); + /* force do_signal() --> is_syscall() */ + if (ptraced & PT_PTRACED) + set_thread_flag(TIF_SIGPENDING); } diff --git a/arch/um/kernel/sigio.c b/arch/um/kernel/sigio.c index 2a1639255763973eaed54dfda4d20090a6e3bf5d..c88211139a5160ba5b18fa3117445e2b5f351423 100644 --- a/arch/um/kernel/sigio.c +++ b/arch/um/kernel/sigio.c @@ -25,8 +25,7 @@ int write_sigio_irq(int fd) int err; err = um_request_irq(SIGIO_WRITE_IRQ, fd, IRQ_READ, sigio_interrupt, - IRQF_SAMPLE_RANDOM, "write sigio", - NULL); + 0, "write sigio", NULL); if (err) { printk(KERN_ERR "write_sigio_irq : um_request_irq failed, " "err = %d\n", err); diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c index 7362d58efc29612c1ffaad64558b3a986b820515..cc9c2350e41741647f074cc4f43d6c4e3599123f 100644 --- a/arch/um/kernel/signal.c +++ b/arch/um/kernel/signal.c @@ -22,9 +22,13 @@ static void handle_signal(struct pt_regs *regs, unsigned long signr, struct k_sigaction *ka, siginfo_t *info) { sigset_t *oldset = sigmask_to_save(); + int singlestep = 0; unsigned long sp; int err; + if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED)) + singlestep = 1; + /* Did we come from a system call? */ if (PT_REGS_SYSCALL_NR(regs) >= 0) { /* If so, check system call restarting.. */ @@ -61,7 +65,7 @@ static void handle_signal(struct pt_regs *regs, unsigned long signr, if (err) force_sigsegv(signr, current); else - signal_delivered(signr, info, ka, regs, 0); + signal_delivered(signr, info, ka, regs, singlestep); } static int kern_do_signal(struct pt_regs *regs) diff --git a/arch/um/kernel/skas/syscall.c b/arch/um/kernel/skas/syscall.c index 05fbeb480e0b554f313185ef97a6482c61b4fb72..86368a025a9684e0bb4dea3707128c4693befe7c 100644 --- a/arch/um/kernel/skas/syscall.c +++ b/arch/um/kernel/skas/syscall.c @@ -18,7 +18,7 @@ void handle_syscall(struct uml_pt_regs *r) long result; int syscall; - syscall_trace(r, 0); + syscall_trace_enter(regs); /* * This should go in the declaration of syscall, but when I do that, @@ -34,7 +34,7 @@ void handle_syscall(struct uml_pt_regs *r) result = -ENOSYS; else result = EXECUTE_SYSCALL(syscall, regs); - UPT_SET_SYSCALL_RETURN(r, result); + PT_REGS_SET_SYSCALL_RETURN(regs, result); - syscall_trace(r, 1); + syscall_trace_leave(regs); } diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c index f958cb876ee3d3e47ddff71094e8026c0a110f5d..a4c6d8eee74c702999cc26955e250f40db30f553 100644 --- a/arch/um/kernel/syscall.c +++ b/arch/um/kernel/syscall.c @@ -17,25 +17,25 @@ long sys_fork(void) { - long ret; - - current->thread.forking = 1; - ret = do_fork(SIGCHLD, UPT_SP(¤t->thread.regs.regs), + return do_fork(SIGCHLD, UPT_SP(¤t->thread.regs.regs), ¤t->thread.regs, 0, NULL, NULL); - current->thread.forking = 0; - return ret; } long sys_vfork(void) { - long ret; - - current->thread.forking = 1; - ret = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, UPT_SP(¤t->thread.regs.regs), ¤t->thread.regs, 0, NULL, NULL); - current->thread.forking = 0; - return ret; +} + +long sys_clone(unsigned long clone_flags, unsigned long newsp, + void __user *parent_tid, void __user *child_tid) +{ + if (!newsp) + newsp = UPT_SP(¤t->thread.regs.regs); + + return do_fork(clone_flags, newsp, ¤t->thread.regs, 0, parent_tid, + child_tid); } long old_mmap(unsigned long addr, unsigned long len, diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c index d1a23fb3190daa9274e033572331c7a9799d5ce4..5f76d4ba151cf0b9cf79f099f8568061a63a631d 100644 --- a/arch/um/kernel/time.c +++ b/arch/um/kernel/time.c @@ -13,7 +13,7 @@ #include "kern_util.h" #include "os.h" -void timer_handler(int sig, struct uml_pt_regs *regs) +void timer_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs) { unsigned long flags; diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c index 3be60765c0e25d634282ea66e0902a9dc8d41bd4..0353b98ae35a28208c695816bd9b7883ad6fb22e 100644 --- a/arch/um/kernel/trap.c +++ b/arch/um/kernel/trap.c @@ -172,7 +172,7 @@ void fatal_sigsegv(void) os_dump_core(); } -void segv_handler(int sig, struct uml_pt_regs *regs) +void segv_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs) { struct faultinfo * fi = UPT_FAULTINFO(regs); @@ -258,8 +258,11 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, return 0; } -void relay_signal(int sig, struct uml_pt_regs *regs) +void relay_signal(int sig, struct siginfo *si, struct uml_pt_regs *regs) { + struct faultinfo *fi; + struct siginfo clean_si; + if (!UPT_IS_USER(regs)) { if (sig == SIGBUS) printk(KERN_ERR "Bus error - the host /dev/shm or /tmp " @@ -269,18 +272,40 @@ void relay_signal(int sig, struct uml_pt_regs *regs) arch_examine_signal(sig, regs); - current->thread.arch.faultinfo = *UPT_FAULTINFO(regs); - force_sig(sig, current); + memset(&clean_si, 0, sizeof(clean_si)); + clean_si.si_signo = si->si_signo; + clean_si.si_errno = si->si_errno; + clean_si.si_code = si->si_code; + switch (sig) { + case SIGILL: + case SIGFPE: + case SIGSEGV: + case SIGBUS: + case SIGTRAP: + fi = UPT_FAULTINFO(regs); + clean_si.si_addr = (void __user *) FAULT_ADDRESS(*fi); + current->thread.arch.faultinfo = *fi; +#ifdef __ARCH_SI_TRAPNO + clean_si.si_trapno = si->si_trapno; +#endif + break; + default: + printk(KERN_ERR "Attempted to relay unknown signal %d (si_code = %d)\n", + sig, si->si_code); + } + + force_sig_info(sig, &clean_si, current); } -void bus_handler(int sig, struct uml_pt_regs *regs) +void bus_handler(int sig, struct siginfo *si, struct uml_pt_regs *regs) { if (current->thread.fault_catcher != NULL) UML_LONGJMP(current->thread.fault_catcher, 1); - else relay_signal(sig, regs); + else + relay_signal(sig, si, regs); } -void winch(int sig, struct uml_pt_regs *regs) +void winch(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs) { do_IRQ(WINCH_IRQ, regs); } diff --git a/arch/um/os-Linux/internal.h b/arch/um/os-Linux/internal.h index 2c3c3ecd8c01d894c4ed8d12f4159209aaabf58d..0dc2c9f135f67d417df719a049a4379e9108406c 100644 --- a/arch/um/os-Linux/internal.h +++ b/arch/um/os-Linux/internal.h @@ -1 +1 @@ -void alarm_handler(int, mcontext_t *); +void alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc); diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c index 2d22f1fcd8e244269ed0e55c7c25e0f09a3b7e8a..6366ce904b9b96145cd6c42b317283f33503e14b 100644 --- a/arch/um/os-Linux/signal.c +++ b/arch/um/os-Linux/signal.c @@ -13,8 +13,9 @@ #include "kern_util.h" #include "os.h" #include "sysdep/mcontext.h" +#include "internal.h" -void (*sig_info[NSIG])(int, struct uml_pt_regs *) = { +void (*sig_info[NSIG])(int, siginfo_t *, struct uml_pt_regs *) = { [SIGTRAP] = relay_signal, [SIGFPE] = relay_signal, [SIGILL] = relay_signal, @@ -24,7 +25,7 @@ void (*sig_info[NSIG])(int, struct uml_pt_regs *) = { [SIGIO] = sigio_handler, [SIGVTALRM] = timer_handler }; -static void sig_handler_common(int sig, mcontext_t *mc) +static void sig_handler_common(int sig, siginfo_t *si, mcontext_t *mc) { struct uml_pt_regs r; int save_errno = errno; @@ -40,7 +41,7 @@ static void sig_handler_common(int sig, mcontext_t *mc) if ((sig != SIGIO) && (sig != SIGWINCH) && (sig != SIGVTALRM)) unblock_signals(); - (*sig_info[sig])(sig, &r); + (*sig_info[sig])(sig, si, &r); errno = save_errno; } @@ -60,7 +61,7 @@ static void sig_handler_common(int sig, mcontext_t *mc) static int signals_enabled; static unsigned int signals_pending; -void sig_handler(int sig, mcontext_t *mc) +void sig_handler(int sig, siginfo_t *si, mcontext_t *mc) { int enabled; @@ -72,7 +73,7 @@ void sig_handler(int sig, mcontext_t *mc) block_signals(); - sig_handler_common(sig, mc); + sig_handler_common(sig, si, mc); set_signals(enabled); } @@ -85,10 +86,10 @@ static void real_alarm_handler(mcontext_t *mc) get_regs_from_mc(®s, mc); regs.is_user = 0; unblock_signals(); - timer_handler(SIGVTALRM, ®s); + timer_handler(SIGVTALRM, NULL, ®s); } -void alarm_handler(int sig, mcontext_t *mc) +void alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc) { int enabled; @@ -119,7 +120,7 @@ void set_sigstack(void *sig_stack, int size) panic("enabling signal stack failed, errno = %d\n", errno); } -static void (*handlers[_NSIG])(int sig, mcontext_t *mc) = { +static void (*handlers[_NSIG])(int sig, siginfo_t *si, mcontext_t *mc) = { [SIGSEGV] = sig_handler, [SIGBUS] = sig_handler, [SIGILL] = sig_handler, @@ -132,7 +133,7 @@ static void (*handlers[_NSIG])(int sig, mcontext_t *mc) = { }; -static void hard_handler(int sig, siginfo_t *info, void *p) +static void hard_handler(int sig, siginfo_t *si, void *p) { struct ucontext *uc = p; mcontext_t *mc = &uc->uc_mcontext; @@ -161,7 +162,7 @@ static void hard_handler(int sig, siginfo_t *info, void *p) while ((sig = ffs(pending)) != 0){ sig--; pending &= ~(1 << sig); - (*handlers[sig])(sig, mc); + (*handlers[sig])(sig, si, mc); } /* @@ -273,9 +274,12 @@ void unblock_signals(void) * Deal with SIGIO first because the alarm handler might * schedule, leaving the pending SIGIO stranded until we come * back here. + * + * SIGIO's handler doesn't use siginfo or mcontext, + * so they can be NULL. */ if (save_pending & SIGIO_MASK) - sig_handler_common(SIGIO, NULL); + sig_handler_common(SIGIO, NULL, NULL); if (save_pending & SIGVTALRM_MASK) real_alarm_handler(NULL); diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index cd65727854eb607b54291e23f2708ccf02717b87..d93bb40499f7bd57b264b32b5a36ec4a52ed5a6a 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -346,6 +346,10 @@ void userspace(struct uml_pt_regs *regs) int err, status, op, pid = userspace_pid[0]; /* To prevent races if using_sysemu changes under us.*/ int local_using_sysemu; + siginfo_t si; + + /* Handle any immediate reschedules or signals */ + interrupt_end(); if (getitimer(ITIMER_VIRTUAL, &timer)) printk(UM_KERN_ERR "Failed to get itimer, errno = %d\n", errno); @@ -404,13 +408,17 @@ void userspace(struct uml_pt_regs *regs) if (WIFSTOPPED(status)) { int sig = WSTOPSIG(status); + + ptrace(PTRACE_GETSIGINFO, pid, 0, &si); + switch (sig) { case SIGSEGV: if (PTRACE_FULL_FAULTINFO || !ptrace_faultinfo) { get_skas_faultinfo(pid, ®s->faultinfo); - (*sig_info[SIGSEGV])(SIGSEGV, regs); + (*sig_info[SIGSEGV])(SIGSEGV, &si, + regs); } else handle_segv(pid, regs); break; @@ -418,14 +426,14 @@ void userspace(struct uml_pt_regs *regs) handle_trap(pid, regs, local_using_sysemu); break; case SIGTRAP: - relay_signal(SIGTRAP, regs); + relay_signal(SIGTRAP, &si, regs); break; case SIGVTALRM: now = os_nsecs(); if (now < nsecs) break; block_signals(); - (*sig_info[sig])(sig, regs); + (*sig_info[sig])(sig, &si, regs); unblock_signals(); nsecs = timer.it_value.tv_sec * UM_NSEC_PER_SEC + @@ -439,7 +447,7 @@ void userspace(struct uml_pt_regs *regs) case SIGFPE: case SIGWINCH: block_signals(); - (*sig_info[sig])(sig, regs); + (*sig_info[sig])(sig, &si, regs); unblock_signals(); break; default: diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c index 910499d76a678a1830f5ea634c86acfd67276493..0748fe0c8a73dfa07aad69af8db1e4dcf5194550 100644 --- a/arch/um/os-Linux/time.c +++ b/arch/um/os-Linux/time.c @@ -87,7 +87,7 @@ static int after_sleep_interval(struct timespec *ts) static void deliver_alarm(void) { - alarm_handler(SIGVTALRM, NULL); + alarm_handler(SIGVTALRM, NULL, NULL); } static unsigned long long sleep_time(unsigned long long nsecs) @@ -114,7 +114,7 @@ static void deliver_alarm(void) skew += this_tick - last_tick; while (skew >= one_tick) { - alarm_handler(SIGVTALRM, NULL); + alarm_handler(SIGVTALRM, NULL, NULL); skew -= one_tick; } diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index d50270d26b427ace5d5f7c8777094298859a54c3..15889df9b4663771ccddc00f7e0275645ceceb0f 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -8,7 +8,7 @@ USER_OBJS += $(filter %_user.o,$(obj-y) $(obj-m) $(USER_SINGLE_OBJS)) USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file)) $(USER_OBJS:.o=.%): \ - c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) -include user.h $(CFLAGS_$(basetarget).o) + c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) -include $(srctree)/include/linux/kern_levels.h -include user.h $(CFLAGS_$(basetarget).o) # These are like USER_OBJS but filter USER_CFLAGS through unprofile instead of # using it directly. diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ba2657c492171c5ce5c295d1e1d4ef85391608d8..50a1d1f9b6d3ac28c6b2294cd579d71cda2e75c1 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -746,10 +746,10 @@ config SWIOTLB def_bool y if X86_64 ---help--- Support for software bounce buffers used on x86-64 systems - which don't have a hardware IOMMU (e.g. the current generation - of Intel's x86-64 CPUs). Using this PCI devices which can only - access 32-bits of memory can be used on systems with more than - 3 GB of memory. If unsure, say Y. + which don't have a hardware IOMMU. Using this PCI devices + which can only access 32-bits of memory can be used on systems + with more than 3 GB of memory. + If unsure, say Y. config IOMMU_HELPER def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU) @@ -1527,7 +1527,7 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. config CC_STACKPROTECTOR - bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" + bool "Enable -fstack-protector buffer overflow detection" ---help--- This option turns on the -fstack-protector GCC feature. This feature puts, at the beginning of functions, a canary value on diff --git a/arch/x86/Makefile b/arch/x86/Makefile index b0c5276861ec8cc3b5713b6f83335746f812edde..474ca35b1bce342356b27ac4118f133135d8c249 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -27,6 +27,10 @@ ifeq ($(CONFIG_X86_32),y) KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return + # Never want PIC in a 32-bit kernel, prevent breakage with GCC built + # with nonstandard options + KBUILD_CFLAGS += -fno-pic + # prevent gcc from keeping the stack 16 byte aligned KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) @@ -138,7 +142,7 @@ KBUILD_CFLAGS += $(call cc-option,-mno-avx,) KBUILD_CFLAGS += $(mflags-y) KBUILD_AFLAGS += $(mflags-y) -archscripts: +archscripts: scripts_basic $(Q)$(MAKE) $(build)=arch/x86/tools relocs ### diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 5a747dd884dbf1097916f46aaf195eb93ebe7b6c..f7535bedc33f3b73ee6c0d0b276435ae4b9fb8be 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -57,7 +57,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ + -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ $(call cc-option, -fno-unit-at-a-time)) \ diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 441520e4174f9f08736af4368f0c74e1f1ec5b0b..a3ac52b29cbfc5abd3c178fcfbfe7d7586d6e7f2 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -33,6 +33,14 @@ #define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */ #define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */ #define MCI_STATUS_AR (1ULL<<55) /* Action required */ +#define MCACOD 0xffff /* MCA Error Code */ + +/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */ +#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */ +#define MCACOD_SCRUBMSK 0xfff0 +#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */ +#define MCACOD_DATA 0x0134 /* Data Load */ +#define MCACOD_INSTR 0x0150 /* Instruction Fetch */ /* MCi_MISC register defines */ #define MCI_MISC_ADDR_LSB(m) ((m) & 0x3f) diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h index 87bdbca72f94854fd1bba2031b4ec007cd3fff72..72f9adf6eca48da8b2312a10d162fb7ac8feb86b 100644 --- a/arch/x86/include/asm/olpc.h +++ b/arch/x86/include/asm/olpc.h @@ -100,25 +100,6 @@ extern void olpc_xo1_pm_wakeup_clear(u16 value); extern int pci_olpc_init(void); -/* EC related functions */ - -extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, - unsigned char *outbuf, size_t outlen); - -/* EC commands */ - -#define EC_FIRMWARE_REV 0x08 -#define EC_WRITE_SCI_MASK 0x1b -#define EC_WAKE_UP_WLAN 0x24 -#define EC_WLAN_LEAVE_RESET 0x25 -#define EC_READ_EB_MODE 0x2a -#define EC_SET_SCI_INHIBIT 0x32 -#define EC_SET_SCI_INHIBIT_RELEASE 0x34 -#define EC_WLAN_ENTER_RESET 0x35 -#define EC_WRITE_EXT_SCI_MASK 0x38 -#define EC_SCI_QUERY 0x84 -#define EC_EXT_SCI_QUERY 0x85 - /* SCI source values */ #define EC_SCI_SRC_EMPTY 0x00 diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index dab39350e51e446917d5b5e302fe1ac2214b10d0..cb4e43bce98ab46e262f3b235765e5ebd6270ddd 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -196,11 +196,16 @@ static inline u32 get_ibs_caps(void) { return 0; } extern void perf_events_lapic_init(void); /* - * Abuse bit 3 of the cpu eflags register to indicate proper PEBS IP fixups. - * This flag is otherwise unused and ABI specified to be 0, so nobody should - * care what we do with it. + * Abuse bits {3,5} of the cpu eflags register. These flags are otherwise + * unused and ABI specified to be 0, so nobody should care what we do with + * them. + * + * EXACT - the IP points to the exact instruction that triggered the + * event (HW bugs exempt). + * VM - original X86_VM_MASK; see set_linear_ip(). */ #define PERF_EFLAGS_EXACT (1UL << 3) +#define PERF_EFLAGS_VM (1UL << 5) struct pt_regs; extern unsigned long perf_instruction_pointer(struct pt_regs *regs); diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index b315a33867f25963808ebe9fc81ec9889a8deca7..33692eaabab58619c7481cbfc7c6f01be929e5e9 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -12,8 +12,7 @@ * Simple spin lock operations. There are two variants, one clears IRQ's * on the local processor, one does not. * - * These are fair FIFO ticket locks, which are currently limited to 256 - * CPUs. + * These are fair FIFO ticket locks, which support up to 2^16 CPUs. * * (the type definitions are in asm/spinlock_types.h) */ diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index 93971e841dd5e7eaa032f5f4a8d5542040900a6d..472b9b783019a2e2f7c7b273ab7b13b96ec257b9 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -51,7 +51,8 @@ extern unsigned long set_phys_range_identity(unsigned long pfn_s, extern int m2p_add_override(unsigned long mfn, struct page *page, struct gnttab_map_grant_ref *kmap_op); -extern int m2p_remove_override(struct page *page, bool clear_pte); +extern int m2p_remove_override(struct page *page, + struct gnttab_map_grant_ref *kmap_op); extern struct page *m2p_find_override(unsigned long mfn); extern unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn); diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 95bf99de9058128f320356caa6cad1ce9b2727da..1b8e5a03d942439c4b58a7470f181dcb99b29e85 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -25,10 +25,6 @@ unsigned long acpi_realmode_flags; static char temp_stack[4096]; #endif -asmlinkage void acpi_enter_s3(void) -{ - acpi_enter_sleep_state(3, wake_sleep_flags); -} /** * acpi_suspend_lowlevel - save kernel state * diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index 5653a5791ec92291844a55665cc50a0cb402095b..67f59f8c695651977e45d88e15bc66781777f31c 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -2,7 +2,6 @@ * Variables and functions used by the code in sleep.c */ -#include #include extern unsigned long saved_video_mode; @@ -11,7 +10,6 @@ extern long saved_magic; extern int wakeup_pmode_return; extern u8 wake_sleep_flags; -extern asmlinkage void acpi_enter_s3(void); extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S index 72610839f03b3d45e8fa6adb49a13fe933b477b2..13ab720573e3e31e317ac52f977e168401552f17 100644 --- a/arch/x86/kernel/acpi/wakeup_32.S +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -74,7 +74,9 @@ restore_registers: ENTRY(do_suspend_lowlevel) call save_processor_state call save_registers - call acpi_enter_s3 + pushl $3 + call acpi_enter_sleep_state + addl $4, %esp # In case of S3 failure, we'll emerge here. Jump # to ret_point to recover diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S index 014d1d28c397076606be9d50f04af06892bf2f03..8ea5164cbd0451a27b9048699f60c2420057edb3 100644 --- a/arch/x86/kernel/acpi/wakeup_64.S +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -71,7 +71,9 @@ ENTRY(do_suspend_lowlevel) movq %rsi, saved_rsi addq $8, %rsp - call acpi_enter_s3 + movl $3, %edi + xorl %eax, %eax + call acpi_enter_sleep_state /* in case something went wrong, restore the machine status and go on */ jmp resume_point diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 931280ff8299471df09b60033cdb06b46a361677..ced4534baed574f7596b014f979748b1eedc2653 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -165,7 +165,7 @@ static const unsigned char * const k7_nops[ASM_NOP_MAX+2] = #endif #ifdef P6_NOP1 -static const unsigned char __initconst_or_module p6nops[] = +static const unsigned char p6nops[] = { P6_NOP1, P6_NOP2, @@ -224,7 +224,7 @@ void __init arch_init_ideal_nops(void) ideal_nops = intel_nops; #endif } - + break; default: #ifdef CONFIG_X86_64 ideal_nops = k8_nops; diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 406eee7846849990d8f87d53243e6cd171944e17..c265593ec2cdc3df35fda1586aaf91514fab62fa 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1204,7 +1204,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg) BUG_ON(!cfg->vector); vector = cfg->vector; - for_each_cpu(cpu, cfg->domain) + for_each_cpu_and(cpu, cfg->domain, cpu_online_mask) per_cpu(vector_irq, cpu)[vector] = -1; cfg->vector = 0; @@ -1212,7 +1212,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg) if (likely(!cfg->move_in_progress)) return; - for_each_cpu(cpu, cfg->old_domain) { + for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) { for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) { if (per_cpu(vector_irq, cpu)[vector] != irq) @@ -1356,6 +1356,16 @@ static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg, if (!IO_APIC_IRQ(irq)) return; + /* + * For legacy irqs, cfg->domain starts with cpu 0. Now that IO-APIC + * can handle this irq and the apic driver is finialized at this point, + * update the cfg->domain. + */ + if (irq < legacy_pic->nr_legacy_irqs && + cpumask_equal(cfg->domain, cpumask_of(0))) + apic->vector_allocation_domain(0, cfg->domain, + apic->target_cpus()); + if (assign_irq_vector(irq, cfg, apic->target_cpus())) return; diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 46d8786d655e402b702cc2f19ba4eab9cb5a62cd..a5fbc3c5fccc5e60d61d9ec8f1d3f9f60a2a0467 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -144,6 +144,8 @@ static int __init x86_xsave_setup(char *s) { setup_clear_cpu_cap(X86_FEATURE_XSAVE); setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT); + setup_clear_cpu_cap(X86_FEATURE_AVX); + setup_clear_cpu_cap(X86_FEATURE_AVX2); return 1; } __setup("noxsave", x86_xsave_setup); diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c index 413c2ced887c66c89b1f49fb18a3bac29604ccb2..13017626f9a85c0948fe99cafa1102c0c9d010da 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-severity.c +++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c @@ -55,13 +55,6 @@ static struct severity { #define MCI_UC_S (MCI_STATUS_UC|MCI_STATUS_S) #define MCI_UC_SAR (MCI_STATUS_UC|MCI_STATUS_S|MCI_STATUS_AR) #define MCI_ADDR (MCI_STATUS_ADDRV|MCI_STATUS_MISCV) -#define MCACOD 0xffff -/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */ -#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */ -#define MCACOD_SCRUBMSK 0xfff0 -#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */ -#define MCACOD_DATA 0x0134 /* Data Load */ -#define MCACOD_INSTR 0x0150 /* Instruction Fetch */ MCESEV( NO, "Invalid", diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 5e095f873e3eb731a42012c5e10310fc238ed9c7..292d0258311c82d04c5ec0aeab43924d00c669b4 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -103,6 +103,8 @@ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = { static DEFINE_PER_CPU(struct work_struct, mce_work); +static void (*quirk_no_way_out)(int bank, struct mce *m, struct pt_regs *regs); + /* * CPU/chipset specific EDAC code can register a notifier call here to print * MCE errors in a human-readable form. @@ -650,14 +652,18 @@ EXPORT_SYMBOL_GPL(machine_check_poll); * Do a quick check if any of the events requires a panic. * This decides if we keep the events around or clear them. */ -static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp) +static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp, + struct pt_regs *regs) { int i, ret = 0; for (i = 0; i < banks; i++) { m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i)); - if (m->status & MCI_STATUS_VAL) + if (m->status & MCI_STATUS_VAL) { __set_bit(i, validp); + if (quirk_no_way_out) + quirk_no_way_out(i, m, regs); + } if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY) ret = 1; } @@ -1040,7 +1046,7 @@ void do_machine_check(struct pt_regs *regs, long error_code) *final = m; memset(valid_banks, 0, sizeof(valid_banks)); - no_way_out = mce_no_way_out(&m, &msg, valid_banks); + no_way_out = mce_no_way_out(&m, &msg, valid_banks, regs); barrier(); @@ -1418,6 +1424,34 @@ static void __mcheck_cpu_init_generic(void) } } +/* + * During IFU recovery Sandy Bridge -EP4S processors set the RIPV and + * EIPV bits in MCG_STATUS to zero on the affected logical processor (SDM + * Vol 3B Table 15-20). But this confuses both the code that determines + * whether the machine check occurred in kernel or user mode, and also + * the severity assessment code. Pretend that EIPV was set, and take the + * ip/cs values from the pt_regs that mce_gather_info() ignored earlier. + */ +static void quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs) +{ + if (bank != 0) + return; + if ((m->mcgstatus & (MCG_STATUS_EIPV|MCG_STATUS_RIPV)) != 0) + return; + if ((m->status & (MCI_STATUS_OVER|MCI_STATUS_UC| + MCI_STATUS_EN|MCI_STATUS_MISCV|MCI_STATUS_ADDRV| + MCI_STATUS_PCC|MCI_STATUS_S|MCI_STATUS_AR| + MCACOD)) != + (MCI_STATUS_UC|MCI_STATUS_EN| + MCI_STATUS_MISCV|MCI_STATUS_ADDRV|MCI_STATUS_S| + MCI_STATUS_AR|MCACOD_INSTR)) + return; + + m->mcgstatus |= MCG_STATUS_EIPV; + m->ip = regs->ip; + m->cs = regs->cs; +} + /* Add per CPU specific workarounds here */ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c) { @@ -1515,6 +1549,9 @@ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c) */ if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0) mce_bootlog = 0; + + if (c->x86 == 6 && c->x86_model == 45) + quirk_no_way_out = quirk_sandybridge_ifu; } if (monarch_timeout < 0) monarch_timeout = 0; diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 29557aa06dda6a724add1d6be6f7744f2d801d34..915b876edd1e2b8a509786446642302648989a73 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include "perf_event.h" @@ -1738,6 +1740,29 @@ valid_user_frame(const void __user *fp, unsigned long size) return (__range_not_ok(fp, size, TASK_SIZE) == 0); } +static unsigned long get_segment_base(unsigned int segment) +{ + struct desc_struct *desc; + int idx = segment >> 3; + + if ((segment & SEGMENT_TI_MASK) == SEGMENT_LDT) { + if (idx > LDT_ENTRIES) + return 0; + + if (idx > current->active_mm->context.size) + return 0; + + desc = current->active_mm->context.ldt; + } else { + if (idx > GDT_ENTRIES) + return 0; + + desc = __this_cpu_ptr(&gdt_page.gdt[0]); + } + + return get_desc_base(desc + idx); +} + #ifdef CONFIG_COMPAT #include @@ -1746,13 +1771,17 @@ static inline int perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry) { /* 32-bit process in 64-bit kernel. */ + unsigned long ss_base, cs_base; struct stack_frame_ia32 frame; const void __user *fp; if (!test_thread_flag(TIF_IA32)) return 0; - fp = compat_ptr(regs->bp); + cs_base = get_segment_base(regs->cs); + ss_base = get_segment_base(regs->ss); + + fp = compat_ptr(ss_base + regs->bp); while (entry->nr < PERF_MAX_STACK_DEPTH) { unsigned long bytes; frame.next_frame = 0; @@ -1765,8 +1794,8 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry) if (!valid_user_frame(fp, sizeof(frame))) break; - perf_callchain_store(entry, frame.return_address); - fp = compat_ptr(frame.next_frame); + perf_callchain_store(entry, cs_base + frame.return_address); + fp = compat_ptr(ss_base + frame.next_frame); } return 1; } @@ -1789,6 +1818,12 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) return; } + /* + * We don't know what to do with VM86 stacks.. ignore them for now. + */ + if (regs->flags & (X86_VM_MASK | PERF_EFLAGS_VM)) + return; + fp = (void __user *)regs->bp; perf_callchain_store(entry, regs->ip); @@ -1816,16 +1851,50 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) } } -unsigned long perf_instruction_pointer(struct pt_regs *regs) +/* + * Deal with code segment offsets for the various execution modes: + * + * VM86 - the good olde 16 bit days, where the linear address is + * 20 bits and we use regs->ip + 0x10 * regs->cs. + * + * IA32 - Where we need to look at GDT/LDT segment descriptor tables + * to figure out what the 32bit base address is. + * + * X32 - has TIF_X32 set, but is running in x86_64 + * + * X86_64 - CS,DS,SS,ES are all zero based. + */ +static unsigned long code_segment_base(struct pt_regs *regs) { - unsigned long ip; + /* + * If we are in VM86 mode, add the segment offset to convert to a + * linear address. + */ + if (regs->flags & X86_VM_MASK) + return 0x10 * regs->cs; + + /* + * For IA32 we look at the GDT/LDT segment base to convert the + * effective IP to a linear address. + */ +#ifdef CONFIG_X86_32 + if (user_mode(regs) && regs->cs != __USER_CS) + return get_segment_base(regs->cs); +#else + if (test_thread_flag(TIF_IA32)) { + if (user_mode(regs) && regs->cs != __USER32_CS) + return get_segment_base(regs->cs); + } +#endif + return 0; +} +unsigned long perf_instruction_pointer(struct pt_regs *regs) +{ if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) - ip = perf_guest_cbs->get_guest_ip(); - else - ip = instruction_pointer(regs); + return perf_guest_cbs->get_guest_ip(); - return ip; + return regs->ip + code_segment_base(regs); } unsigned long perf_misc_flags(struct pt_regs *regs) @@ -1838,7 +1907,7 @@ unsigned long perf_misc_flags(struct pt_regs *regs) else misc |= PERF_RECORD_MISC_GUEST_KERNEL; } else { - if (!kernel_ip(regs->ip)) + if (user_mode(regs)) misc |= PERF_RECORD_MISC_USER; else misc |= PERF_RECORD_MISC_KERNEL; diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index 821d53b696d1408fb1b71faffda28283052d9733..8b6defe7eefc5e6de1538984622f109c4223528d 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -516,6 +516,26 @@ static inline bool kernel_ip(unsigned long ip) #endif } +/* + * Not all PMUs provide the right context information to place the reported IP + * into full context. Specifically segment registers are typically not + * supplied. + * + * Assuming the address is a linear address (it is for IBS), we fake the CS and + * vm86 mode using the known zero-based code segment and 'fix up' the registers + * to reflect this. + * + * Intel PEBS/LBR appear to typically provide the effective address, nothing + * much we can do about that but pray and treat it like a linear address. + */ +static inline void set_linear_ip(struct pt_regs *regs, unsigned long ip) +{ + regs->cs = kernel_ip(ip) ? __KERNEL_CS : __USER_CS; + if (regs->flags & X86_VM_MASK) + regs->flags ^= (PERF_EFLAGS_VM | X86_VM_MASK); + regs->ip = ip; +} + #ifdef CONFIG_CPU_SUP_AMD int amd_pmu_init(void); @@ -566,6 +586,8 @@ extern struct event_constraint intel_westmere_pebs_event_constraints[]; extern struct event_constraint intel_snb_pebs_event_constraints[]; +extern struct event_constraint intel_ivb_pebs_event_constraints[]; + struct event_constraint *intel_pebs_constraints(struct perf_event *event); void intel_pmu_pebs_enable(struct perf_event *event); diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c index da9bcdcd9856666daf006c06ae6e14af4c77bca9..eebd5ffe1bba0b922f9ef8481fd141f2ba9668da 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -13,6 +13,8 @@ #include +#include "perf_event.h" + static u32 ibs_caps; #if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD) @@ -207,6 +209,15 @@ static int perf_ibs_precise_event(struct perf_event *event, u64 *config) return -EOPNOTSUPP; } +static const struct perf_event_attr ibs_notsupp = { + .exclude_user = 1, + .exclude_kernel = 1, + .exclude_hv = 1, + .exclude_idle = 1, + .exclude_host = 1, + .exclude_guest = 1, +}; + static int perf_ibs_init(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; @@ -227,6 +238,9 @@ static int perf_ibs_init(struct perf_event *event) if (event->pmu != &perf_ibs->pmu) return -ENOENT; + if (perf_flags(&event->attr) & perf_flags(&ibs_notsupp)) + return -EINVAL; + if (config & ~perf_ibs->config_mask) return -EINVAL; @@ -536,7 +550,7 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs) if (check_rip && (ibs_data.regs[2] & IBS_RIP_INVALID)) { regs.flags &= ~PERF_EFLAGS_EXACT; } else { - instruction_pointer_set(®s, ibs_data.regs[1]); + set_linear_ip(®s, ibs_data.regs[1]); regs.flags |= PERF_EFLAGS_EXACT; } diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 382366977d4c7856d2cd354ebccc908da65e1a4b..6bca492b85475bc8eab5577447ce1fa9a5133223 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1522,8 +1522,16 @@ static struct perf_guest_switch_msr *intel_guest_get_msrs(int *nr) arr[0].msr = MSR_CORE_PERF_GLOBAL_CTRL; arr[0].host = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_guest_mask; arr[0].guest = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_host_mask; + /* + * If PMU counter has PEBS enabled it is not enough to disable counter + * on a guest entry since PEBS memory write can overshoot guest entry + * and corrupt guest memory. Disabling PEBS solves the problem. + */ + arr[1].msr = MSR_IA32_PEBS_ENABLE; + arr[1].host = cpuc->pebs_enabled; + arr[1].guest = 0; - *nr = 1; + *nr = 2; return arr; } @@ -2000,6 +2008,7 @@ __init int intel_pmu_init(void) break; case 28: /* Atom */ + case 54: /* Cedariew */ memcpy(hw_cache_event_ids, atom_hw_cache_event_ids, sizeof(hw_cache_event_ids)); @@ -2039,7 +2048,6 @@ __init int intel_pmu_init(void) case 42: /* SandyBridge */ case 45: /* SandyBridge, "Romely-EP" */ x86_add_quirk(intel_sandybridge_quirk); - case 58: /* IvyBridge */ memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, sizeof(hw_cache_event_ids)); memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs, @@ -2064,6 +2072,29 @@ __init int intel_pmu_init(void) pr_cont("SandyBridge events, "); break; + case 58: /* IvyBridge */ + memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, + sizeof(hw_cache_event_ids)); + memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs, + sizeof(hw_cache_extra_regs)); + + intel_pmu_lbr_init_snb(); + + x86_pmu.event_constraints = intel_snb_event_constraints; + x86_pmu.pebs_constraints = intel_ivb_pebs_event_constraints; + x86_pmu.pebs_aliases = intel_pebs_aliases_snb; + x86_pmu.extra_regs = intel_snb_extra_regs; + /* all extra regs are per-cpu when HT is on */ + x86_pmu.er_flags |= ERF_HAS_RSP_1; + x86_pmu.er_flags |= ERF_NO_HT_SHARING; + + /* UOPS_ISSUED.ANY,c=1,i=1 to count stall cycles */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = + X86_CONFIG(.event=0x0e, .umask=0x01, .inv=1, .cmask=1); + + pr_cont("IvyBridge events, "); + break; + default: switch (x86_pmu.version) { diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 629ae0b7ad901c88706716966b1fd71415debe19..826054a4f2ee4c54ea4cfb9d29ab117db35e7fc5 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -407,6 +407,20 @@ struct event_constraint intel_snb_pebs_event_constraints[] = { EVENT_CONSTRAINT_END }; +struct event_constraint intel_ivb_pebs_event_constraints[] = { + INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */ + INTEL_UEVENT_CONSTRAINT(0x01c2, 0xf), /* UOPS_RETIRED.ALL */ + INTEL_UEVENT_CONSTRAINT(0x02c2, 0xf), /* UOPS_RETIRED.RETIRE_SLOTS */ + INTEL_EVENT_CONSTRAINT(0xc4, 0xf), /* BR_INST_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xc5, 0xf), /* BR_MISP_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd0, 0xf), /* MEM_UOP_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd3, 0xf), /* MEM_LOAD_UOPS_LLC_MISS_RETIRED.* */ + EVENT_CONSTRAINT_END +}; + struct event_constraint *intel_pebs_constraints(struct perf_event *event) { struct event_constraint *c; @@ -499,7 +513,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) * We sampled a branch insn, rewind using the LBR stack */ if (ip == to) { - regs->ip = from; + set_linear_ip(regs, from); return 1; } @@ -529,7 +543,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) } while (to < ip); if (to == ip) { - regs->ip = old_to; + set_linear_ip(regs, old_to); return 1; } @@ -569,7 +583,8 @@ static void __intel_pmu_pebs_event(struct perf_event *event, * A possible PERF_SAMPLE_REGS will have to transfer all regs. */ regs = *iregs; - regs.ip = pebs->ip; + regs.flags = pebs->flags; + set_linear_ip(®s, pebs->ip); regs.bp = pebs->bp; regs.sp = pebs->sp; diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c index 520b4265fcd215ee5afe240fe11c944dd6bc06aa..da02e9cc3754b4a2c1a37c1edb44865143f7f723 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c +++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c @@ -686,7 +686,8 @@ void intel_pmu_lbr_init_atom(void) * to have an operational LBR which can freeze * on PMU interrupt */ - if (boot_cpu_data.x86_mask < 10) { + if (boot_cpu_data.x86_model == 28 + && boot_cpu_data.x86_mask < 10) { pr_cont("LBR disabled due to erratum"); return; } diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 7563fda9f0339b935c7b40a347409b966f7ffbdc..38e4894165b9cdc096e038de65fc4ee04bdb0690 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -661,6 +661,11 @@ static void snb_uncore_msr_init_box(struct intel_uncore_box *box) } } +static struct uncore_event_desc snb_uncore_events[] = { + INTEL_UNCORE_EVENT_DESC(clockticks, "event=0xff,umask=0x00"), + { /* end: all zeroes */ }, +}; + static struct attribute *snb_uncore_formats_attr[] = { &format_attr_event.attr, &format_attr_umask.attr, @@ -704,6 +709,7 @@ static struct intel_uncore_type snb_uncore_cbox = { .constraints = snb_uncore_cbox_constraints, .ops = &snb_uncore_msr_ops, .format_group = &snb_uncore_format_group, + .event_descs = snb_uncore_events, }; static struct intel_uncore_type *snb_msr_uncores[] = { @@ -796,7 +802,6 @@ static struct intel_uncore_type *nhm_msr_uncores[] = { DEFINE_UNCORE_FORMAT_ATTR(event5, event, "config:1-5"); DEFINE_UNCORE_FORMAT_ATTR(counter, counter, "config:6-7"); -DEFINE_UNCORE_FORMAT_ATTR(mm_cfg, mm_cfg, "config:63"); DEFINE_UNCORE_FORMAT_ATTR(match, match, "config1:0-63"); DEFINE_UNCORE_FORMAT_ATTR(mask, mask, "config2:0-63"); @@ -902,16 +907,21 @@ static struct attribute_group nhmex_uncore_cbox_format_group = { .attrs = nhmex_uncore_cbox_formats_attr, }; +/* msr offset for each instance of cbox */ +static unsigned nhmex_cbox_msr_offsets[] = { + 0x0, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x240, 0x2c0, +}; + static struct intel_uncore_type nhmex_uncore_cbox = { .name = "cbox", .num_counters = 6, - .num_boxes = 8, + .num_boxes = 10, .perf_ctr_bits = 48, .event_ctl = NHMEX_C0_MSR_PMON_EV_SEL0, .perf_ctr = NHMEX_C0_MSR_PMON_CTR0, .event_mask = NHMEX_PMON_RAW_EVENT_MASK, .box_ctl = NHMEX_C0_MSR_PMON_GLOBAL_CTL, - .msr_offset = NHMEX_C_MSR_OFFSET, + .msr_offsets = nhmex_cbox_msr_offsets, .pair_ctr_ctl = 1, .ops = &nhmex_uncore_ops, .format_group = &nhmex_uncore_cbox_format_group @@ -1032,24 +1042,22 @@ static struct intel_uncore_type nhmex_uncore_bbox = { static int nhmex_sbox_hw_config(struct intel_uncore_box *box, struct perf_event *event) { - struct hw_perf_event_extra *reg1 = &event->hw.extra_reg; - struct hw_perf_event_extra *reg2 = &event->hw.branch_reg; + struct hw_perf_event *hwc = &event->hw; + struct hw_perf_event_extra *reg1 = &hwc->extra_reg; + struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - if (event->attr.config & NHMEX_S_PMON_MM_CFG_EN) { - reg1->config = event->attr.config1; - reg2->config = event->attr.config2; - } else { - reg1->config = ~0ULL; - reg2->config = ~0ULL; - } + /* only TO_R_PROG_EV event uses the match/mask register */ + if ((hwc->config & NHMEX_PMON_CTL_EV_SEL_MASK) != + NHMEX_S_EVENT_TO_R_PROG_EV) + return 0; if (box->pmu->pmu_idx == 0) reg1->reg = NHMEX_S0_MSR_MM_CFG; else reg1->reg = NHMEX_S1_MSR_MM_CFG; - reg1->idx = 0; - + reg1->config = event->attr.config1; + reg2->config = event->attr.config2; return 0; } @@ -1059,8 +1067,8 @@ static void nhmex_sbox_msr_enable_event(struct intel_uncore_box *box, struct per struct hw_perf_event_extra *reg1 = &hwc->extra_reg; struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - wrmsrl(reg1->reg, 0); - if (reg1->config != ~0ULL || reg2->config != ~0ULL) { + if (reg1->idx != EXTRA_REG_NONE) { + wrmsrl(reg1->reg, 0); wrmsrl(reg1->reg + 1, reg1->config); wrmsrl(reg1->reg + 2, reg2->config); wrmsrl(reg1->reg, NHMEX_S_PMON_MM_CFG_EN); @@ -1074,7 +1082,6 @@ static struct attribute *nhmex_uncore_sbox_formats_attr[] = { &format_attr_edge.attr, &format_attr_inv.attr, &format_attr_thresh8.attr, - &format_attr_mm_cfg.attr, &format_attr_match.attr, &format_attr_mask.attr, NULL, @@ -1142,6 +1149,9 @@ static struct extra_reg nhmex_uncore_mbox_extra_regs[] = { EVENT_EXTRA_END }; +/* Nehalem-EX or Westmere-EX ? */ +bool uncore_nhmex; + static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 config) { struct intel_uncore_extra_reg *er; @@ -1171,18 +1181,29 @@ static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 return false; /* mask of the shared fields */ - mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK; + if (uncore_nhmex) + mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK; + else + mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK; er = &box->shared_regs[EXTRA_REG_NHMEX_M_ZDP_CTL_FVC]; raw_spin_lock_irqsave(&er->lock, flags); /* add mask of the non-shared field if it's in use */ - if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) - mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) { + if (uncore_nhmex) + mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + mask |= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + } if (!atomic_read(&er->ref) || !((er->config ^ config) & mask)) { atomic_add(1 << (idx * 8), &er->ref); - mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK | - NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (uncore_nhmex) + mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK | + NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK | + WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); er->config &= ~mask; er->config |= (config & mask); ret = true; @@ -1216,7 +1237,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify) /* get the non-shared control bits and shift them */ idx = orig_idx - EXTRA_REG_NHMEX_M_ZDP_CTL_FVC; - config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (uncore_nhmex) + config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + config &= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); if (new_idx > orig_idx) { idx = new_idx - orig_idx; config <<= 3 * idx; @@ -1226,6 +1250,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify) } /* add the shared control bits back */ + if (uncore_nhmex) + config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; + else + config |= WSMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; if (modify) { /* adjust the main event selector */ @@ -1264,7 +1292,8 @@ nhmex_mbox_get_constraint(struct intel_uncore_box *box, struct perf_event *event } /* for the match/mask registers */ - if ((uncore_box_is_fake(box) || !reg2->alloc) && + if (reg2->idx != EXTRA_REG_NONE && + (uncore_box_is_fake(box) || !reg2->alloc) && !nhmex_mbox_get_shared_reg(box, reg2->idx, reg2->config)) goto fail; @@ -1278,7 +1307,8 @@ nhmex_mbox_get_constraint(struct intel_uncore_box *box, struct perf_event *event if (idx[0] != 0xff && idx[0] != __BITS_VALUE(reg1->idx, 0, 8)) nhmex_mbox_alter_er(event, idx[0], true); reg1->alloc |= alloc; - reg2->alloc = 1; + if (reg2->idx != EXTRA_REG_NONE) + reg2->alloc = 1; } return NULL; fail: @@ -1342,9 +1372,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event struct extra_reg *er; unsigned msr; int reg_idx = 0; - - if (WARN_ON_ONCE(reg1->idx != -1)) - return -EINVAL; /* * The mbox events may require 2 extra MSRs at the most. But only * the lower 32 bits in these MSRs are significant, so we can use @@ -1355,11 +1382,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event continue; if (event->attr.config1 & ~er->valid_mask) return -EINVAL; - if (er->idx == __BITS_VALUE(reg1->idx, 0, 8) || - er->idx == __BITS_VALUE(reg1->idx, 1, 8)) - continue; - if (WARN_ON_ONCE(reg_idx >= 2)) - return -EINVAL; msr = er->msr + type->msr_offset * box->pmu->pmu_idx; if (WARN_ON_ONCE(msr >= 0xffff || er->idx >= 0xff)) @@ -1368,6 +1390,8 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event /* always use the 32~63 bits to pass the PLD config */ if (er->idx == EXTRA_REG_NHMEX_M_PLD) reg_idx = 1; + else if (WARN_ON_ONCE(reg_idx > 0)) + return -EINVAL; reg1->idx &= ~(0xff << (reg_idx * 8)); reg1->reg &= ~(0xffff << (reg_idx * 16)); @@ -1376,17 +1400,21 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event reg1->config = event->attr.config1; reg_idx++; } - /* use config2 to pass the filter config */ - reg2->idx = EXTRA_REG_NHMEX_M_FILTER; - if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN) - reg2->config = event->attr.config2; - else - reg2->config = ~0ULL; - if (box->pmu->pmu_idx == 0) - reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG; - else - reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG; - + /* + * The mbox only provides ability to perform address matching + * for the PLD events. + */ + if (reg_idx == 2) { + reg2->idx = EXTRA_REG_NHMEX_M_FILTER; + if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN) + reg2->config = event->attr.config2; + else + reg2->config = ~0ULL; + if (box->pmu->pmu_idx == 0) + reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG; + else + reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG; + } return 0; } @@ -1422,34 +1450,36 @@ static void nhmex_mbox_msr_enable_event(struct intel_uncore_box *box, struct per wrmsrl(__BITS_VALUE(reg1->reg, 1, 16), nhmex_mbox_shared_reg_config(box, idx)); - wrmsrl(reg2->reg, 0); - if (reg2->config != ~0ULL) { - wrmsrl(reg2->reg + 1, - reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK); - wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK & - (reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT)); - wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN); + if (reg2->idx != EXTRA_REG_NONE) { + wrmsrl(reg2->reg, 0); + if (reg2->config != ~0ULL) { + wrmsrl(reg2->reg + 1, + reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK); + wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK & + (reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT)); + wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN); + } } wrmsrl(hwc->config_base, hwc->config | NHMEX_PMON_CTL_EN_BIT0); } -DEFINE_UNCORE_FORMAT_ATTR(count_mode, count_mode, "config:2-3"); -DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode, "config:4-5"); -DEFINE_UNCORE_FORMAT_ATTR(wrap_mode, wrap_mode, "config:6"); -DEFINE_UNCORE_FORMAT_ATTR(flag_mode, flag_mode, "config:7"); -DEFINE_UNCORE_FORMAT_ATTR(inc_sel, inc_sel, "config:9-13"); -DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel, set_flag_sel, "config:19-21"); -DEFINE_UNCORE_FORMAT_ATTR(filter_cfg, filter_cfg, "config2:63"); -DEFINE_UNCORE_FORMAT_ATTR(filter_match, filter_match, "config2:0-33"); -DEFINE_UNCORE_FORMAT_ATTR(filter_mask, filter_mask, "config2:34-61"); -DEFINE_UNCORE_FORMAT_ATTR(dsp, dsp, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(thr, thr, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(fvc, fvc, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(pgt, pgt, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(map, map, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(iss, iss, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(pld, pld, "config1:32-63"); +DEFINE_UNCORE_FORMAT_ATTR(count_mode, count_mode, "config:2-3"); +DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode, "config:4-5"); +DEFINE_UNCORE_FORMAT_ATTR(wrap_mode, wrap_mode, "config:6"); +DEFINE_UNCORE_FORMAT_ATTR(flag_mode, flag_mode, "config:7"); +DEFINE_UNCORE_FORMAT_ATTR(inc_sel, inc_sel, "config:9-13"); +DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel, set_flag_sel, "config:19-21"); +DEFINE_UNCORE_FORMAT_ATTR(filter_cfg_en, filter_cfg_en, "config2:63"); +DEFINE_UNCORE_FORMAT_ATTR(filter_match, filter_match, "config2:0-33"); +DEFINE_UNCORE_FORMAT_ATTR(filter_mask, filter_mask, "config2:34-61"); +DEFINE_UNCORE_FORMAT_ATTR(dsp, dsp, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(thr, thr, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(fvc, fvc, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(pgt, pgt, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(map, map, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(iss, iss, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(pld, pld, "config1:32-63"); static struct attribute *nhmex_uncore_mbox_formats_attr[] = { &format_attr_count_mode.attr, @@ -1458,7 +1488,7 @@ static struct attribute *nhmex_uncore_mbox_formats_attr[] = { &format_attr_flag_mode.attr, &format_attr_inc_sel.attr, &format_attr_set_flag_sel.attr, - &format_attr_filter_cfg.attr, + &format_attr_filter_cfg_en.attr, &format_attr_filter_match.attr, &format_attr_filter_mask.attr, &format_attr_dsp.attr, @@ -1482,6 +1512,12 @@ static struct uncore_event_desc nhmex_uncore_mbox_events[] = { { /* end: all zeroes */ }, }; +static struct uncore_event_desc wsmex_uncore_mbox_events[] = { + INTEL_UNCORE_EVENT_DESC(bbox_cmds_read, "inc_sel=0xd,fvc=0x5000"), + INTEL_UNCORE_EVENT_DESC(bbox_cmds_write, "inc_sel=0xd,fvc=0x5040"), + { /* end: all zeroes */ }, +}; + static struct intel_uncore_ops nhmex_uncore_mbox_ops = { NHMEX_UNCORE_OPS_COMMON_INIT(), .enable_event = nhmex_mbox_msr_enable_event, @@ -1513,7 +1549,7 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) struct hw_perf_event_extra *reg1 = &hwc->extra_reg; int port; - /* adjust the main event selector */ + /* adjust the main event selector and extra register index */ if (reg1->idx % 2) { reg1->idx--; hwc->config -= 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT; @@ -1522,29 +1558,17 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) hwc->config += 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT; } - /* adjust address or config of extra register */ + /* adjust extra register config */ port = reg1->idx / 6 + box->pmu->pmu_idx * 4; switch (reg1->idx % 6) { - case 0: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port); - break; - case 1: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port); - break; case 2: - /* the 8~15 bits to the 0~7 bits */ + /* shift the 8~15 bits to the 0~7 bits */ reg1->config >>= 8; break; case 3: - /* the 0~7 bits to the 8~15 bits */ + /* shift the 0~7 bits to the 8~15 bits */ reg1->config <<= 8; break; - case 4: - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port); - break; - case 5: - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port); - break; }; } @@ -1671,7 +1695,7 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &event->hw.extra_reg; struct hw_perf_event_extra *reg2 = &event->hw.branch_reg; - int port, idx; + int idx; idx = (event->hw.config & NHMEX_R_PMON_CTL_EV_SEL_MASK) >> NHMEX_R_PMON_CTL_EV_SEL_SHIFT; @@ -1681,27 +1705,11 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event reg1->idx = idx; reg1->config = event->attr.config1; - port = idx / 6 + box->pmu->pmu_idx * 4; - idx %= 6; - switch (idx) { - case 0: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port); - break; - case 1: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port); - break; - case 2: - case 3: - reg1->reg = NHMEX_R_MSR_PORTN_QLX_CFG(port); - break; + switch (idx % 6) { case 4: case 5: - if (idx == 4) - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port); - else - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port); - reg2->config = event->attr.config2; hwc->config |= event->attr.config & (~0ULL << 32); + reg2->config = event->attr.config2; break; }; return 0; @@ -1727,28 +1735,34 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &hwc->extra_reg; struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - int idx, er_idx; + int idx, port; - idx = reg1->idx % 6; - er_idx = idx; - if (er_idx > 2) - er_idx--; - er_idx += (reg1->idx / 6) * 5; + idx = reg1->idx; + port = idx / 6 + box->pmu->pmu_idx * 4; - switch (idx) { + switch (idx % 6) { case 0: + wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG0(port), reg1->config); + break; case 1: - wrmsrl(reg1->reg, reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG1(port), reg1->config); break; case 2: case 3: - wrmsrl(reg1->reg, nhmex_rbox_shared_reg_config(box, er_idx)); + wrmsrl(NHMEX_R_MSR_PORTN_QLX_CFG(port), + nhmex_rbox_shared_reg_config(box, 2 + (idx / 6) * 5)); break; case 4: + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port), + hwc->config >> 32); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MATCH(port), reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MASK(port), reg2->config); + break; case 5: - wrmsrl(reg1->reg, reg1->config); - wrmsrl(reg1->reg + 1, hwc->config >> 32); - wrmsrl(reg1->reg + 2, reg2->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port), + hwc->config >> 32); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MATCH(port), reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MASK(port), reg2->config); break; }; @@ -1756,8 +1770,8 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per (hwc->config & NHMEX_R_PMON_CTL_EV_SEL_MASK)); } -DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config:32-63"); -DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config1:0-63"); +DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config:32-63"); +DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config1:0-63"); DEFINE_UNCORE_FORMAT_ATTR(xbr_mask, xbr_mask, "config2:0-63"); DEFINE_UNCORE_FORMAT_ATTR(qlx_cfg, qlx_cfg, "config1:0-15"); DEFINE_UNCORE_FORMAT_ATTR(iperf_cfg, iperf_cfg, "config1:0-31"); @@ -2303,6 +2317,7 @@ int uncore_pmu_event_init(struct perf_event *event) event->hw.idx = -1; event->hw.last_tag = ~0ULL; event->hw.extra_reg.idx = EXTRA_REG_NONE; + event->hw.branch_reg.idx = EXTRA_REG_NONE; if (event->attr.config == UNCORE_FIXED_EVENT) { /* no fixed counter */ @@ -2373,7 +2388,7 @@ static void __init uncore_type_exit(struct intel_uncore_type *type) type->attr_groups[1] = NULL; } -static void uncore_types_exit(struct intel_uncore_type **types) +static void __init uncore_types_exit(struct intel_uncore_type **types) { int i; for (i = 0; types[i]; i++) @@ -2814,7 +2829,13 @@ static int __init uncore_cpu_init(void) snbep_uncore_cbox.num_boxes = max_cores; msr_uncores = snbep_msr_uncores; break; - case 46: + case 46: /* Nehalem-EX */ + uncore_nhmex = true; + case 47: /* Westmere-EX aka. Xeon E7 */ + if (!uncore_nhmex) + nhmex_uncore_mbox.event_descs = wsmex_uncore_mbox_events; + if (nhmex_uncore_cbox.num_boxes > max_cores) + nhmex_uncore_cbox.num_boxes = max_cores; msr_uncores = nhmex_msr_uncores; break; default: diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h index f3851892e0770c540c9df3a7da4925da9ecf2198..5b81c1856aacadb95da71cdf7474bc1633ac7ecc 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h @@ -5,7 +5,7 @@ #include "perf_event.h" #define UNCORE_PMU_NAME_LEN 32 -#define UNCORE_PMU_HRTIMER_INTERVAL (60 * NSEC_PER_SEC) +#define UNCORE_PMU_HRTIMER_INTERVAL (60LL * NSEC_PER_SEC) #define UNCORE_FIXED_EVENT 0xff #define UNCORE_PMC_IDX_MAX_GENERIC 8 @@ -230,6 +230,7 @@ #define NHMEX_S1_MSR_MASK 0xe5a #define NHMEX_S_PMON_MM_CFG_EN (0x1ULL << 63) +#define NHMEX_S_EVENT_TO_R_PROG_EV 0 /* NHM-EX Mbox */ #define NHMEX_M0_MSR_GLOBAL_CTL 0xca0 @@ -275,18 +276,12 @@ NHMEX_M_PMON_CTL_INC_SEL_MASK | \ NHMEX_M_PMON_CTL_SET_FLAG_SEL_MASK) - -#define NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK 0x1f -#define NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK (0x7 << 5) -#define NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK (0x7 << 8) -#define NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR (1 << 23) -#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK \ - (NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR) +#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK (((1 << 11) - 1) | (1 << 23)) #define NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n) (0x7 << (11 + 3 * (n))) +#define WSMEX_M_PMON_ZDP_CTL_FVC_MASK (((1 << 12) - 1) | (1 << 24)) +#define WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n) (0x7 << (12 + 3 * (n))) + /* * use the 9~13 bits to select event If the 7th bit is not set, * otherwise use the 19~21 bits to select event. @@ -368,6 +363,7 @@ struct intel_uncore_type { unsigned num_shared_regs:8; unsigned single_fixed:1; unsigned pair_ctr_ctl:1; + unsigned *msr_offsets; struct event_constraint unconstrainted; struct event_constraint *constraints; struct intel_uncore_pmu *pmus; @@ -485,29 +481,31 @@ unsigned uncore_pci_perf_ctr(struct intel_uncore_box *box, int idx) return idx * 8 + box->pmu->type->perf_ctr; } -static inline -unsigned uncore_msr_box_ctl(struct intel_uncore_box *box) +static inline unsigned uncore_msr_box_offset(struct intel_uncore_box *box) +{ + struct intel_uncore_pmu *pmu = box->pmu; + return pmu->type->msr_offsets ? + pmu->type->msr_offsets[pmu->pmu_idx] : + pmu->type->msr_offset * pmu->pmu_idx; +} + +static inline unsigned uncore_msr_box_ctl(struct intel_uncore_box *box) { if (!box->pmu->type->box_ctl) return 0; - return box->pmu->type->box_ctl + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->box_ctl + uncore_msr_box_offset(box); } -static inline -unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box) +static inline unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box) { if (!box->pmu->type->fixed_ctl) return 0; - return box->pmu->type->fixed_ctl + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->fixed_ctl + uncore_msr_box_offset(box); } -static inline -unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box) +static inline unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box) { - return box->pmu->type->fixed_ctr + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->fixed_ctr + uncore_msr_box_offset(box); } static inline @@ -515,7 +513,7 @@ unsigned uncore_msr_event_ctl(struct intel_uncore_box *box, int idx) { return box->pmu->type->event_ctl + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + uncore_msr_box_offset(box); } static inline @@ -523,7 +521,7 @@ unsigned uncore_msr_perf_ctr(struct intel_uncore_box *box, int idx) { return box->pmu->type->perf_ctr + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + uncore_msr_box_offset(box); } static inline diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 1f5f1d5d2a022b21a6871c083af70f09b9def90f..d44f7829968e801cf6b32d41be0c5f297971900d 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -270,7 +270,7 @@ void fixup_irqs(void) if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { break_affinity = 1; - affinity = cpu_all_mask; + affinity = cpu_online_mask; } chip = irq_data_get_irq_chip(data); @@ -328,6 +328,7 @@ void fixup_irqs(void) chip->irq_retrigger(data); raw_spin_unlock(&desc->lock); } + __this_cpu_write(vector_irq[vector], -1); } } #endif diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c index 1d5d31ea686be2aaedb2790637674cc0c0fec56b..dc1404bf8e4b4c48bc6a137c372ab3b4396fc376 100644 --- a/arch/x86/kernel/kdebugfs.c +++ b/arch/x86/kernel/kdebugfs.c @@ -107,7 +107,7 @@ static int __init create_setup_data_nodes(struct dentry *parent) { struct setup_data_node *node; struct setup_data *data; - int error = -ENOMEM; + int error; struct dentry *d; struct page *pg; u64 pa_data; @@ -121,8 +121,10 @@ static int __init create_setup_data_nodes(struct dentry *parent) while (pa_data) { node = kmalloc(sizeof(*node), GFP_KERNEL); - if (!node) + if (!node) { + error = -ENOMEM; goto err_dir; + } pg = pfn_to_page((pa_data+sizeof(*data)-1) >> PAGE_SHIFT); if (PageHighMem(pg)) { diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 8a2ce8fd41c0e68bbedc6fce685fb52c95502d24..82746f942cd8db4d59a32631049a79146564052e 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -143,11 +143,12 @@ static int get_matching_microcode(int cpu, const u8 *ucode_ptr, unsigned int *current_size) { struct microcode_header_amd *mc_hdr; - unsigned int actual_size; + unsigned int actual_size, patch_size; u16 equiv_cpu_id; /* size of the current patch we're staring at */ - *current_size = *(u32 *)(ucode_ptr + 4) + SECTION_HDR_SIZE; + patch_size = *(u32 *)(ucode_ptr + 4); + *current_size = patch_size + SECTION_HDR_SIZE; equiv_cpu_id = find_equiv_id(); if (!equiv_cpu_id) @@ -174,7 +175,7 @@ static int get_matching_microcode(int cpu, const u8 *ucode_ptr, /* * now that the header looks sane, verify its size */ - actual_size = verify_ucode_size(cpu, *current_size, leftover_size); + actual_size = verify_ucode_size(cpu, patch_size, leftover_size); if (!actual_size) return 0; diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 4873e62db6a18468b23736c5f4adfd2de8b3b85b..9e5bcf1e2376e9713adc8841df162293c859c97c 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -225,6 +225,9 @@ static ssize_t microcode_write(struct file *file, const char __user *buf, if (do_microcode_update(buf, len) == 0) ret = (ssize_t)len; + if (ret > 0) + perf_check_microcode(); + mutex_unlock(µcode_mutex); put_online_cpus(); diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 97d9a9914ba8d772e522911252261110cfa58677..a3b57a27be880649ac7b0ae4144bc62faf105cbc 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -475,13 +475,26 @@ register_address(struct x86_emulate_ctxt *ctxt, unsigned long reg) return address_mask(ctxt, reg); } +static void masked_increment(ulong *reg, ulong mask, int inc) +{ + assign_masked(reg, *reg + inc, mask); +} + static inline void register_address_increment(struct x86_emulate_ctxt *ctxt, unsigned long *reg, int inc) { + ulong mask; + if (ctxt->ad_bytes == sizeof(unsigned long)) - *reg += inc; + mask = ~0UL; else - *reg = (*reg & ~ad_mask(ctxt)) | ((*reg + inc) & ad_mask(ctxt)); + mask = ad_mask(ctxt); + masked_increment(reg, mask, inc); +} + +static void rsp_increment(struct x86_emulate_ctxt *ctxt, int inc) +{ + masked_increment(&ctxt->regs[VCPU_REGS_RSP], stack_mask(ctxt), inc); } static inline void jmp_rel(struct x86_emulate_ctxt *ctxt, int rel) @@ -1522,8 +1535,8 @@ static int push(struct x86_emulate_ctxt *ctxt, void *data, int bytes) { struct segmented_address addr; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], -bytes); - addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]); + rsp_increment(ctxt, -bytes); + addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt); addr.seg = VCPU_SREG_SS; return segmented_write(ctxt, addr, data, bytes); @@ -1542,13 +1555,13 @@ static int emulate_pop(struct x86_emulate_ctxt *ctxt, int rc; struct segmented_address addr; - addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]); + addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt); addr.seg = VCPU_SREG_SS; rc = segmented_read(ctxt, addr, dest, len); if (rc != X86EMUL_CONTINUE) return rc; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], len); + rsp_increment(ctxt, len); return rc; } @@ -1688,8 +1701,7 @@ static int em_popa(struct x86_emulate_ctxt *ctxt) while (reg >= VCPU_REGS_RAX) { if (reg == VCPU_REGS_RSP) { - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], - ctxt->op_bytes); + rsp_increment(ctxt, ctxt->op_bytes); --reg; } @@ -2825,7 +2837,7 @@ static int em_ret_near_imm(struct x86_emulate_ctxt *ctxt) rc = emulate_pop(ctxt, &ctxt->dst.val, ctxt->op_bytes); if (rc != X86EMUL_CONTINUE) return rc; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], ctxt->src.val); + rsp_increment(ctxt, ctxt->src.val); return X86EMUL_CONTINUE; } diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c index 1df8fb9e1d5dafc47000ef644823a748c1b31c91..9fc9aa7ac7034c64dc8cdb59f27f5ac80e1d77ab 100644 --- a/arch/x86/kvm/i8259.c +++ b/arch/x86/kvm/i8259.c @@ -316,6 +316,11 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val) addr &= 1; if (addr == 0) { if (val & 0x10) { + u8 edge_irr = s->irr & ~s->elcr; + int i; + bool found = false; + struct kvm_vcpu *vcpu; + s->init4 = val & 1; s->last_irr = 0; s->irr &= s->elcr; @@ -333,6 +338,18 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val) if (val & 0x08) pr_pic_unimpl( "level sensitive irq not supported"); + + kvm_for_each_vcpu(i, vcpu, s->pics_state->kvm) + if (kvm_apic_accept_pic_intr(vcpu)) { + found = true; + break; + } + + + if (found) + for (irq = 0; irq < PIC_NUM_PINS/2; irq++) + if (edge_irr & (1 << irq)) + pic_clear_isr(s, irq); } else if (val & 0x08) { if (val & 0x04) s->poll = 1; diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 01ca00423938515cfe43781403e90bfb84929fc3..7fbd0d273ea83dbec4a330fcb6d14a8ab46462b0 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -4112,17 +4112,22 @@ static int mmu_shrink(struct shrinker *shrink, struct shrink_control *sc) int idx; LIST_HEAD(invalid_list); + /* + * Never scan more than sc->nr_to_scan VM instances. + * Will not hit this condition practically since we do not try + * to shrink more than one VM and it is very unlikely to see + * !n_used_mmu_pages so many times. + */ + if (!nr_to_scan--) + break; /* * n_used_mmu_pages is accessed without holding kvm->mmu_lock * here. We may skip a VM instance errorneosly, but we do not * want to shrink a VM that only started to populate its MMU * anyway. */ - if (kvm->arch.n_used_mmu_pages > 0) { - if (!nr_to_scan--) - break; + if (!kvm->arch.n_used_mmu_pages) continue; - } idx = srcu_read_lock(&kvm->srcu); spin_lock(&kvm->mmu_lock); diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index c39b60707e0262be788b6909d3e46d63d746cadf..b1eb202ee76a9265d920ca1b02d57aa1ff803d9a 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1488,13 +1488,6 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx) loadsegment(ds, vmx->host_state.ds_sel); loadsegment(es, vmx->host_state.es_sel); } -#else - /* - * The sysexit path does not restore ds/es, so we must set them to - * a reasonable value ourselves. - */ - loadsegment(ds, __USER_DS); - loadsegment(es, __USER_DS); #endif reload_tss(); #ifdef CONFIG_X86_64 @@ -3626,6 +3619,7 @@ static void seg_setup(int seg) static int alloc_apic_access_page(struct kvm *kvm) { + struct page *page; struct kvm_userspace_memory_region kvm_userspace_mem; int r = 0; @@ -3640,7 +3634,13 @@ static int alloc_apic_access_page(struct kvm *kvm) if (r) goto out; - kvm->arch.apic_access_page = gfn_to_page(kvm, 0xfee00); + page = gfn_to_page(kvm, 0xfee00); + if (is_error_page(page)) { + r = -EFAULT; + goto out; + } + + kvm->arch.apic_access_page = page; out: mutex_unlock(&kvm->slots_lock); return r; @@ -3648,6 +3648,7 @@ static int alloc_apic_access_page(struct kvm *kvm) static int alloc_identity_pagetable(struct kvm *kvm) { + struct page *page; struct kvm_userspace_memory_region kvm_userspace_mem; int r = 0; @@ -3663,8 +3664,13 @@ static int alloc_identity_pagetable(struct kvm *kvm) if (r) goto out; - kvm->arch.ept_identity_pagetable = gfn_to_page(kvm, - kvm->arch.ept_identity_map_addr >> PAGE_SHIFT); + page = gfn_to_page(kvm, kvm->arch.ept_identity_map_addr >> PAGE_SHIFT); + if (is_error_page(page)) { + r = -EFAULT; + goto out; + } + + kvm->arch.ept_identity_pagetable = page; out: mutex_unlock(&kvm->slots_lock); return r; @@ -6370,6 +6376,19 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) #endif ); +#ifndef CONFIG_X86_64 + /* + * The sysexit path does not restore ds/es, so we must set them to + * a reasonable value ourselves. + * + * We can't defer this to vmx_load_host_state() since that function + * may be executed in interrupt context, which saves and restore segments + * around it, nullifying its effect. + */ + loadsegment(ds, __USER_DS); + loadsegment(es, __USER_DS); +#endif + vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP) | (1 << VCPU_EXREG_RFLAGS) | (1 << VCPU_EXREG_CPL) @@ -6569,7 +6588,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu) /* Exposing INVPCID only when PCID is exposed */ best = kvm_find_cpuid_entry(vcpu, 0x7, 0); if (vmx_invpcid_supported() && - best && (best->ecx & bit(X86_FEATURE_INVPCID)) && + best && (best->ebx & bit(X86_FEATURE_INVPCID)) && guest_cpuid_has_pcid(vcpu)) { exec_control |= SECONDARY_EXEC_ENABLE_INVPCID; vmcs_write32(SECONDARY_VM_EXEC_CONTROL, @@ -6579,7 +6598,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu) vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control); if (best) - best->ecx &= ~bit(X86_FEATURE_INVPCID); + best->ebx &= ~bit(X86_FEATURE_INVPCID); } } diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 59b59508ff07dc2623887d6be43859215d5bd589..2966c847d489d84f1f2b3cb8450daf4bcce1d568 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -806,7 +806,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc); * kvm-specific. Those are put in the beginning of the list. */ -#define KVM_SAVE_MSRS_BEGIN 9 +#define KVM_SAVE_MSRS_BEGIN 10 static u32 msrs_to_save[] = { MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK, MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW, @@ -925,6 +925,10 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock) */ getboottime(&boot); + if (kvm->arch.kvmclock_offset) { + struct timespec ts = ns_to_timespec(kvm->arch.kvmclock_offset); + boot = timespec_sub(boot, ts); + } wc.sec = boot.tv_sec; wc.nsec = boot.tv_nsec; wc.version = version; @@ -1996,6 +2000,9 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) case MSR_KVM_STEAL_TIME: data = vcpu->arch.st.msr_val; break; + case MSR_KVM_PV_EOI_EN: + data = vcpu->arch.pv_eoi.msr_val; + break; case MSR_IA32_P5_MC_ADDR: case MSR_IA32_P5_MC_TYPE: case MSR_IA32_MCG_CAP: @@ -5106,17 +5113,20 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu) !kvm_event_needs_reinjection(vcpu); } -static void vapic_enter(struct kvm_vcpu *vcpu) +static int vapic_enter(struct kvm_vcpu *vcpu) { struct kvm_lapic *apic = vcpu->arch.apic; struct page *page; if (!apic || !apic->vapic_addr) - return; + return 0; page = gfn_to_page(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT); + if (is_error_page(page)) + return -EFAULT; vcpu->arch.apic->vapic_page = page; + return 0; } static void vapic_exit(struct kvm_vcpu *vcpu) @@ -5423,7 +5433,11 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) } vcpu->srcu_idx = srcu_read_lock(&kvm->srcu); - vapic_enter(vcpu); + r = vapic_enter(vcpu); + if (r) { + srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx); + return r; + } r = 1; while (r > 0) { diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index f6679a7fb8ca492482f18421d78f438cc9cfba2b..b91e48512425f6f210e9406cbfc666395bad6ad1 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -56,9 +56,16 @@ static int vma_shareable(struct vm_area_struct *vma, unsigned long addr) } /* - * search for a shareable pmd page for hugetlb. + * Search for a shareable pmd page for hugetlb. In any case calls pmd_alloc() + * and returns the corresponding pte. While this is not necessary for the + * !shared pmd case because we can allocate the pmd later as well, it makes the + * code much cleaner. pmd allocation is essential for the shared case because + * pud has to be populated inside the same i_mmap_mutex section - otherwise + * racing tasks could either miss the sharing (see huge_pte_offset) or select a + * bad pmd for sharing. */ -static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) +static pte_t * +huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) { struct vm_area_struct *vma = find_vma(mm, addr); struct address_space *mapping = vma->vm_file->f_mapping; @@ -68,9 +75,10 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) struct vm_area_struct *svma; unsigned long saddr; pte_t *spte = NULL; + pte_t *pte; if (!vma_shareable(vma, addr)) - return; + return (pte_t *)pmd_alloc(mm, pud, addr); mutex_lock(&mapping->i_mmap_mutex); vma_prio_tree_foreach(svma, &iter, &mapping->i_mmap, idx, idx) { @@ -97,7 +105,9 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) put_page(virt_to_page(spte)); spin_unlock(&mm->page_table_lock); out: + pte = (pte_t *)pmd_alloc(mm, pud, addr); mutex_unlock(&mapping->i_mmap_mutex); + return pte; } /* @@ -142,8 +152,9 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, } else { BUG_ON(sz != PMD_SIZE); if (pud_none(*pud)) - huge_pmd_share(mm, addr, pud); - pte = (pte_t *) pmd_alloc(mm, pud, addr); + pte = huge_pmd_share(mm, addr, pud); + else + pte = (pte_t *)pmd_alloc(mm, pud, addr); } } BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte)); diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index e0e6990723e982e12f425f2fdd26113725f2d52a..ab1f6a93b527c9bd50acc12a52e9ce157f2cc48b 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -319,7 +319,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, */ int devmem_is_allowed(unsigned long pagenr) { - if (pagenr <= 256) + if (pagenr < 256) return 1; if (iomem_is_exclusive(pagenr << PAGE_SHIFT)) return 0; diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 931930a96160b2de489b1dc9c955b676c7a250dd..a718e0d23503fdc4bb3149d4ad5c7046458f2a57 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -919,13 +919,11 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages, /* * On success we use clflush, when the CPU supports it to - * avoid the wbindv. If the CPU does not support it, in the - * error case, and during early boot (for EFI) we fall back - * to cpa_flush_all (which uses wbinvd): + * avoid the wbindv. If the CPU does not support it and in the + * error case we fall back to cpa_flush_all (which uses + * wbindv): */ - if (early_boot_irqs_disabled) - __cpa_flush_all((void *)(long)cache); - else if (!ret && cpu_has_clflush) { + if (!ret && cpu_has_clflush) { if (cpa.flags & (CPA_PAGES_ARRAY | CPA_ARRAY)) { cpa_flush_array(addr, numpages, cache, cpa.flags, pages); diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c index 4599c3e8bcb63f39fe618f0075ba9e52e0fbb353..4ddf497ca65beae876d17867d4cd7d32cd37f39b 100644 --- a/arch/x86/mm/srat.c +++ b/arch/x86/mm/srat.c @@ -142,23 +142,23 @@ static inline int save_add_info(void) {return 0;} #endif /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ -void __init +int __init acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { u64 start, end; int node, pxm; if (srat_disabled()) - return; + return -1; if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) { bad_srat(); - return; + return -1; } if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0) - return; + return -1; if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info()) - return; + return -1; start = ma->base_address; end = start + ma->length; pxm = ma->proximity_domain; @@ -168,12 +168,12 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) if (node < 0) { printk(KERN_ERR "SRAT: Too many proximity domains.\n"); bad_srat(); - return; + return -1; } if (numa_add_memblk(node, start, end) < 0) { bad_srat(); - return; + return -1; } node_set(node, numa_nodes_parsed); @@ -181,6 +181,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n", node, pxm, (unsigned long long) start, (unsigned long long) end - 1); + return 0; } void __init acpi_numa_arch_fixup(void) {} diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 2dc29f51e75aadbfaa29a0c70be54ce02b291ea9..92660edaa1e72de7b027034d83bb9905d0aebe3a 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -234,7 +234,22 @@ static efi_status_t __init phys_efi_set_virtual_address_map( return status; } -static int efi_set_rtc_mmss(unsigned long nowtime) +static efi_status_t __init phys_efi_get_time(efi_time_t *tm, + efi_time_cap_t *tc) +{ + unsigned long flags; + efi_status_t status; + + spin_lock_irqsave(&rtc_lock, flags); + efi_call_phys_prelog(); + status = efi_call_phys2(efi_phys.get_time, virt_to_phys(tm), + virt_to_phys(tc)); + efi_call_phys_epilog(); + spin_unlock_irqrestore(&rtc_lock, flags); + return status; +} + +int efi_set_rtc_mmss(unsigned long nowtime) { int real_seconds, real_minutes; efi_status_t status; @@ -263,7 +278,7 @@ static int efi_set_rtc_mmss(unsigned long nowtime) return 0; } -static unsigned long efi_get_time(void) +unsigned long efi_get_time(void) { efi_status_t status; efi_time_t eft; @@ -606,13 +621,18 @@ static int __init efi_runtime_init(void) } /* * We will only need *early* access to the following - * EFI runtime service before set_virtual_address_map + * two EFI runtime services before set_virtual_address_map * is invoked. */ + efi_phys.get_time = (efi_get_time_t *)runtime->get_time; efi_phys.set_virtual_address_map = (efi_set_virtual_address_map_t *) runtime->set_virtual_address_map; - + /* + * Make efi_get_time can be called before entering + * virtual mode. + */ + efi.get_time = phys_efi_get_time; early_iounmap(runtime, sizeof(efi_runtime_services_t)); return 0; @@ -700,10 +720,12 @@ void __init efi_init(void) efi_enabled = 0; return; } +#ifdef CONFIG_X86_32 if (efi_native) { x86_platform.get_wallclock = efi_get_time; x86_platform.set_wallclock = efi_set_rtc_mmss; } +#endif #if EFI_DEBUG print_efi_memmap(); diff --git a/arch/x86/platform/olpc/olpc-xo1-pm.c b/arch/x86/platform/olpc/olpc-xo1-pm.c index 0ce8616c88aef0e297487604d72fef168b3dacec..d75582d1aa5560c657a98a419ac89c31047f0965 100644 --- a/arch/x86/platform/olpc/olpc-xo1-pm.c +++ b/arch/x86/platform/olpc/olpc-xo1-pm.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -51,16 +52,11 @@ EXPORT_SYMBOL_GPL(olpc_xo1_pm_wakeup_clear); static int xo1_power_state_enter(suspend_state_t pm_state) { unsigned long saved_sci_mask; - int r; /* Only STR is supported */ if (pm_state != PM_SUSPEND_MEM) return -EINVAL; - r = olpc_ec_cmd(EC_SET_SCI_INHIBIT, NULL, 0, NULL, 0); - if (r) - return r; - /* * Save SCI mask (this gets lost since PM1_EN is used as a mask for * wakeup events, which is not necessarily the same event set) @@ -76,16 +72,6 @@ static int xo1_power_state_enter(suspend_state_t pm_state) /* Restore SCI mask (using dword access to CS5536_PM1_EN) */ outl(saved_sci_mask, acpi_base + CS5536_PM1_STS); - /* Tell the EC to stop inhibiting SCIs */ - olpc_ec_cmd(EC_SET_SCI_INHIBIT_RELEASE, NULL, 0, NULL, 0); - - /* - * Tell the wireless module to restart USB communication. - * Must be done twice. - */ - olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0); - olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0); - return 0; } diff --git a/arch/x86/platform/olpc/olpc-xo1-sci.c b/arch/x86/platform/olpc/olpc-xo1-sci.c index 04b8c73659c528f6f8d6b049b6a10a1ada3f3d20..63d4aa40956e33abe7f98f5ed3c36916a6c7b94f 100644 --- a/arch/x86/platform/olpc/olpc-xo1-sci.c +++ b/arch/x86/platform/olpc/olpc-xo1-sci.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include diff --git a/arch/x86/platform/olpc/olpc-xo15-sci.c b/arch/x86/platform/olpc/olpc-xo15-sci.c index 599be499fdf7a8aff278e7e7f16ca9593fde8c41..2fdca25905ae265c52a2695664da433e57e1b616 100644 --- a/arch/x86/platform/olpc/olpc-xo15-sci.c +++ b/arch/x86/platform/olpc/olpc-xo15-sci.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c index a4bee53c2e549a5ff28f6ccd8a85c3abce696ec4..27376081ddec9131a49cf15512f8344c05cae109 100644 --- a/arch/x86/platform/olpc/olpc.c +++ b/arch/x86/platform/olpc/olpc.c @@ -14,14 +14,13 @@ #include #include #include -#include #include #include #include #include #include -#include #include +#include #include #include @@ -31,17 +30,6 @@ struct olpc_platform_t olpc_platform_info; EXPORT_SYMBOL_GPL(olpc_platform_info); -static DEFINE_SPINLOCK(ec_lock); - -/* debugfs interface to EC commands */ -#define EC_MAX_CMD_ARGS (5 + 1) /* cmd byte + 5 args */ -#define EC_MAX_CMD_REPLY (8) - -static struct dentry *ec_debugfs_dir; -static DEFINE_MUTEX(ec_debugfs_cmd_lock); -static unsigned char ec_debugfs_resp[EC_MAX_CMD_REPLY]; -static unsigned int ec_debugfs_resp_bytes; - /* EC event mask to be applied during suspend (defining wakeup sources). */ static u16 ec_wakeup_mask; @@ -125,16 +113,13 @@ static int __wait_on_obf(unsigned int line, unsigned int port, int desired) * . Unfortunately, while * OpenFirmware's source is available, the EC's is not. */ -int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, - unsigned char *outbuf, size_t outlen) +static int olpc_xo1_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf, + size_t outlen, void *arg) { - unsigned long flags; int ret = -EIO; int i; int restarts = 0; - spin_lock_irqsave(&ec_lock, flags); - /* Clear OBF */ for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++) inb(0x68); @@ -198,10 +183,8 @@ int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, ret = 0; err: - spin_unlock_irqrestore(&ec_lock, flags); return ret; } -EXPORT_SYMBOL_GPL(olpc_ec_cmd); void olpc_ec_wakeup_set(u16 value) { @@ -280,96 +263,6 @@ int olpc_ec_sci_query(u16 *sci_value) } EXPORT_SYMBOL_GPL(olpc_ec_sci_query); -static ssize_t ec_debugfs_cmd_write(struct file *file, const char __user *buf, - size_t size, loff_t *ppos) -{ - int i, m; - unsigned char ec_cmd[EC_MAX_CMD_ARGS]; - unsigned int ec_cmd_int[EC_MAX_CMD_ARGS]; - char cmdbuf[64]; - int ec_cmd_bytes; - - mutex_lock(&ec_debugfs_cmd_lock); - - size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size); - - m = sscanf(cmdbuf, "%x:%u %x %x %x %x %x", &ec_cmd_int[0], - &ec_debugfs_resp_bytes, - &ec_cmd_int[1], &ec_cmd_int[2], &ec_cmd_int[3], - &ec_cmd_int[4], &ec_cmd_int[5]); - if (m < 2 || ec_debugfs_resp_bytes > EC_MAX_CMD_REPLY) { - /* reset to prevent overflow on read */ - ec_debugfs_resp_bytes = 0; - - printk(KERN_DEBUG "olpc-ec: bad ec cmd: " - "cmd:response-count [arg1 [arg2 ...]]\n"); - size = -EINVAL; - goto out; - } - - /* convert scanf'd ints to char */ - ec_cmd_bytes = m - 2; - for (i = 0; i <= ec_cmd_bytes; i++) - ec_cmd[i] = ec_cmd_int[i]; - - printk(KERN_DEBUG "olpc-ec: debugfs cmd 0x%02x with %d args " - "%02x %02x %02x %02x %02x, want %d returns\n", - ec_cmd[0], ec_cmd_bytes, ec_cmd[1], ec_cmd[2], ec_cmd[3], - ec_cmd[4], ec_cmd[5], ec_debugfs_resp_bytes); - - olpc_ec_cmd(ec_cmd[0], (ec_cmd_bytes == 0) ? NULL : &ec_cmd[1], - ec_cmd_bytes, ec_debugfs_resp, ec_debugfs_resp_bytes); - - printk(KERN_DEBUG "olpc-ec: response " - "%02x %02x %02x %02x %02x %02x %02x %02x (%d bytes expected)\n", - ec_debugfs_resp[0], ec_debugfs_resp[1], ec_debugfs_resp[2], - ec_debugfs_resp[3], ec_debugfs_resp[4], ec_debugfs_resp[5], - ec_debugfs_resp[6], ec_debugfs_resp[7], ec_debugfs_resp_bytes); - -out: - mutex_unlock(&ec_debugfs_cmd_lock); - return size; -} - -static ssize_t ec_debugfs_cmd_read(struct file *file, char __user *buf, - size_t size, loff_t *ppos) -{ - unsigned int i, r; - char *rp; - char respbuf[64]; - - mutex_lock(&ec_debugfs_cmd_lock); - rp = respbuf; - rp += sprintf(rp, "%02x", ec_debugfs_resp[0]); - for (i = 1; i < ec_debugfs_resp_bytes; i++) - rp += sprintf(rp, ", %02x", ec_debugfs_resp[i]); - mutex_unlock(&ec_debugfs_cmd_lock); - rp += sprintf(rp, "\n"); - - r = rp - respbuf; - return simple_read_from_buffer(buf, size, ppos, respbuf, r); -} - -static const struct file_operations ec_debugfs_genops = { - .write = ec_debugfs_cmd_write, - .read = ec_debugfs_cmd_read, -}; - -static void setup_debugfs(void) -{ - ec_debugfs_dir = debugfs_create_dir("olpc-ec", 0); - if (ec_debugfs_dir == ERR_PTR(-ENODEV)) - return; - - debugfs_create_file("cmd", 0600, ec_debugfs_dir, NULL, - &ec_debugfs_genops); -} - -static int olpc_ec_suspend(void) -{ - return olpc_ec_mask_write(ec_wakeup_mask); -} - static bool __init check_ofw_architecture(struct device_node *root) { const char *olpc_arch; @@ -424,8 +317,59 @@ static int __init add_xo1_platform_devices(void) return 0; } -static struct syscore_ops olpc_syscore_ops = { - .suspend = olpc_ec_suspend, +static int olpc_xo1_ec_probe(struct platform_device *pdev) +{ + /* get the EC revision */ + olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, + (unsigned char *) &olpc_platform_info.ecver, 1); + + /* EC version 0x5f adds support for wide SCI mask */ + if (olpc_platform_info.ecver >= 0x5f) + olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI; + + pr_info("OLPC board revision %s%X (EC=%x)\n", + ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "", + olpc_platform_info.boardrev >> 4, + olpc_platform_info.ecver); + + return 0; +} +static int olpc_xo1_ec_suspend(struct platform_device *pdev) +{ + olpc_ec_mask_write(ec_wakeup_mask); + + /* + * Squelch SCIs while suspended. This is a fix for + * . + */ + return olpc_ec_cmd(EC_SET_SCI_INHIBIT, NULL, 0, NULL, 0); +} + +static int olpc_xo1_ec_resume(struct platform_device *pdev) +{ + /* Tell the EC to stop inhibiting SCIs */ + olpc_ec_cmd(EC_SET_SCI_INHIBIT_RELEASE, NULL, 0, NULL, 0); + + /* + * Tell the wireless module to restart USB communication. + * Must be done twice. + */ + olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0); + olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0); + + return 0; +} + +static struct olpc_ec_driver ec_xo1_driver = { + .probe = olpc_xo1_ec_probe, + .suspend = olpc_xo1_ec_suspend, + .resume = olpc_xo1_ec_resume, + .ec_cmd = olpc_xo1_ec_cmd, +}; + +static struct olpc_ec_driver ec_xo1_5_driver = { + .probe = olpc_xo1_ec_probe, + .ec_cmd = olpc_xo1_ec_cmd, }; static int __init olpc_init(void) @@ -435,16 +379,17 @@ static int __init olpc_init(void) if (!olpc_ofw_present() || !platform_detect()) return 0; - spin_lock_init(&ec_lock); + /* register the XO-1 and 1.5-specific EC handler */ + if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) /* XO-1 */ + olpc_ec_driver_register(&ec_xo1_driver, NULL); + else + olpc_ec_driver_register(&ec_xo1_5_driver, NULL); + platform_device_register_simple("olpc-ec", -1, NULL, 0); /* assume B1 and above models always have a DCON */ if (olpc_board_at_least(olpc_board(0xb1))) olpc_platform_info.flags |= OLPC_F_DCON; - /* get the EC revision */ - olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, - (unsigned char *) &olpc_platform_info.ecver, 1); - #ifdef CONFIG_PCI_OLPC /* If the VSA exists let it emulate PCI, if not emulate in kernel. * XO-1 only. */ @@ -452,14 +397,6 @@ static int __init olpc_init(void) !cs5535_has_vsa2()) x86_init.pci.arch_init = pci_olpc_init; #endif - /* EC version 0x5f adds support for wide SCI mask */ - if (olpc_platform_info.ecver >= 0x5f) - olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI; - - printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n", - ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "", - olpc_platform_info.boardrev >> 4, - olpc_platform_info.ecver); if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) { /* XO-1 */ r = add_xo1_platform_devices(); @@ -467,9 +404,6 @@ static int __init olpc_init(void) return r; } - register_syscore_ops(&olpc_syscore_ops); - setup_debugfs(); - return 0; } diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile index b2d534cab25fc1500c456efbde000779d794e229..88692871823f9910aeb071ad44a86d8c5c251411 100644 --- a/arch/x86/realmode/rm/Makefile +++ b/arch/x86/realmode/rm/Makefile @@ -72,7 +72,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -m32 -g -Os -D_SETUP -D__KERNEL__ -D_WAKEUP \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/../../boot/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ + -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ $(call cc-option, -fno-unit-at-a-time)) \ diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl index 51171aeff0dc31483cdc6526e641459b0d64deb3..a582bfed95bb05fd1ae4f62060f719856d49a405 100644 --- a/arch/x86/syscalls/syscall_64.tbl +++ b/arch/x86/syscalls/syscall_64.tbl @@ -60,8 +60,8 @@ 51 common getsockname sys_getsockname 52 common getpeername sys_getpeername 53 common socketpair sys_socketpair -54 common setsockopt sys_setsockopt -55 common getsockopt sys_getsockopt +54 64 setsockopt sys_setsockopt +55 64 getsockopt sys_getsockopt 56 common clone stub_clone 57 common fork stub_fork 58 common vfork stub_vfork @@ -318,7 +318,7 @@ 309 common getcpu sys_getcpu 310 64 process_vm_readv sys_process_vm_readv 311 64 process_vm_writev sys_process_vm_writev -312 64 kcmp sys_kcmp +312 common kcmp sys_kcmp # # x32-specific system call numbers start at 512 to avoid cache impact @@ -353,3 +353,5 @@ 538 x32 sendmmsg compat_sys_sendmmsg 539 x32 process_vm_readv compat_sys_process_vm_readv 540 x32 process_vm_writev compat_sys_process_vm_writev +541 x32 setsockopt compat_sys_setsockopt +542 x32 getsockopt compat_sys_getsockopt diff --git a/arch/x86/um/Kconfig b/arch/x86/um/Kconfig index 9926e11a772dbe9b5417fa204407c2ec9ee58878..aeaff8bef2f162642ef4ad31603a301384f4b1fe 100644 --- a/arch/x86/um/Kconfig +++ b/arch/x86/um/Kconfig @@ -21,6 +21,7 @@ config 64BIT config X86_32 def_bool !64BIT select HAVE_AOUT + select ARCH_WANT_IPC_PARSE_VERSION config X86_64 def_bool 64BIT diff --git a/arch/x86/um/asm/ptrace.h b/arch/x86/um/asm/ptrace.h index 950dfb7b84173aed904594624f9c33bda6380ebf..e72cd0df5ba381436b8158ebad5ee0f758ba8eab 100644 --- a/arch/x86/um/asm/ptrace.h +++ b/arch/x86/um/asm/ptrace.h @@ -30,10 +30,10 @@ #define profile_pc(regs) PT_REGS_IP(regs) #define UPT_RESTART_SYSCALL(r) (UPT_IP(r) -= 2) -#define UPT_SET_SYSCALL_RETURN(r, res) (UPT_AX(r) = (res)) +#define PT_REGS_SET_SYSCALL_RETURN(r, res) (PT_REGS_AX(r) = (res)) -static inline long regs_return_value(struct uml_pt_regs *regs) +static inline long regs_return_value(struct pt_regs *regs) { - return UPT_AX(regs); + return PT_REGS_AX(regs); } #endif /* __UM_X86_PTRACE_H */ diff --git a/arch/x86/um/shared/sysdep/kernel-offsets.h b/arch/x86/um/shared/sysdep/kernel-offsets.h index 5868526b5eefa3017b784ad1a48c45b6be7ceacf..46a9df99f3c5c952601d7f153adf6bf8c1e3e937 100644 --- a/arch/x86/um/shared/sysdep/kernel-offsets.h +++ b/arch/x86/um/shared/sysdep/kernel-offsets.h @@ -7,9 +7,6 @@ #define DEFINE(sym, val) \ asm volatile("\n->" #sym " %0 " #val : : "i" (val)) -#define STR(x) #x -#define DEFINE_STR(sym, val) asm volatile("\n->" #sym " " STR(val) " " #val: : ) - #define BLANK() asm volatile("\n->" : : ) #define OFFSET(sym, str, mem) \ diff --git a/arch/x86/um/shared/sysdep/syscalls.h b/arch/x86/um/shared/sysdep/syscalls.h index bd9a89b67e41f20bdd17b2f38f5c9543ef28c7b1..ca255a805ed936ea059312b0990e884bb2b07e1b 100644 --- a/arch/x86/um/shared/sysdep/syscalls.h +++ b/arch/x86/um/shared/sysdep/syscalls.h @@ -1,3 +1,5 @@ +extern long sys_clone(unsigned long clone_flags, unsigned long newsp, + void __user *parent_tid, void __user *child_tid); #ifdef __i386__ #include "syscalls_32.h" #else diff --git a/arch/x86/um/signal.c b/arch/x86/um/signal.c index a508cea135033eba3c1c7facba8aebd04a1a0983..ba7363ecf896598c21534af5d09ef1c32e275668 100644 --- a/arch/x86/um/signal.c +++ b/arch/x86/um/signal.c @@ -416,9 +416,6 @@ int setup_signal_stack_sc(unsigned long stack_top, int sig, PT_REGS_AX(regs) = (unsigned long) sig; PT_REGS_DX(regs) = (unsigned long) 0; PT_REGS_CX(regs) = (unsigned long) 0; - - if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED)) - ptrace_notify(SIGTRAP); return 0; } @@ -466,9 +463,6 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, PT_REGS_AX(regs) = (unsigned long) sig; PT_REGS_DX(regs) = (unsigned long) &frame->info; PT_REGS_CX(regs) = (unsigned long) &frame->uc; - - if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED)) - ptrace_notify(SIGTRAP); return 0; } diff --git a/arch/x86/um/sys_call_table_32.c b/arch/x86/um/sys_call_table_32.c index 68d1dc91b37badeaeff9fe517a06df2be6484f8a..b5408cecac6cd68f5f649b0a45749c1fdab40d77 100644 --- a/arch/x86/um/sys_call_table_32.c +++ b/arch/x86/um/sys_call_table_32.c @@ -28,7 +28,7 @@ #define ptregs_execve sys_execve #define ptregs_iopl sys_iopl #define ptregs_vm86old sys_vm86old -#define ptregs_clone sys_clone +#define ptregs_clone i386_clone #define ptregs_vm86 sys_vm86 #define ptregs_sigaltstack sys_sigaltstack #define ptregs_vfork sys_vfork diff --git a/arch/x86/um/syscalls_32.c b/arch/x86/um/syscalls_32.c index b853e8600b9dc1d00e74151a7e16b8af61a8bfda..db444c7218fe53bcabf105b5e2303b7d21a5fd15 100644 --- a/arch/x86/um/syscalls_32.c +++ b/arch/x86/um/syscalls_32.c @@ -3,37 +3,24 @@ * Licensed under the GPL */ -#include "linux/sched.h" -#include "linux/shm.h" -#include "linux/ipc.h" -#include "linux/syscalls.h" -#include "asm/mman.h" -#include "asm/uaccess.h" -#include "asm/unistd.h" +#include +#include /* * The prototype on i386 is: * - * int clone(int flags, void * child_stack, int * parent_tidptr, struct user_desc * newtls, int * child_tidptr) + * int clone(int flags, void * child_stack, int * parent_tidptr, struct user_desc * newtls * * and the "newtls" arg. on i386 is read by copy_thread directly from the * register saved on the stack. */ -long sys_clone(unsigned long clone_flags, unsigned long newsp, - int __user *parent_tid, void *newtls, int __user *child_tid) +long i386_clone(unsigned long clone_flags, unsigned long newsp, + int __user *parent_tid, void *newtls, int __user *child_tid) { - long ret; - - if (!newsp) - newsp = UPT_SP(¤t->thread.regs.regs); - - current->thread.forking = 1; - ret = do_fork(clone_flags, newsp, ¤t->thread.regs, 0, parent_tid, - child_tid); - current->thread.forking = 0; - return ret; + return sys_clone(clone_flags, newsp, parent_tid, child_tid); } + long sys_sigaction(int sig, const struct old_sigaction __user *act, struct old_sigaction __user *oact) { diff --git a/arch/x86/um/syscalls_64.c b/arch/x86/um/syscalls_64.c index f3d82bb6e15a410b5e706617526efe9d56a42243..adb08eb5c22a38710299d3e1a05b3b55e2ee7e63 100644 --- a/arch/x86/um/syscalls_64.c +++ b/arch/x86/um/syscalls_64.c @@ -5,12 +5,9 @@ * Licensed under the GPL */ -#include "linux/linkage.h" -#include "linux/personality.h" -#include "linux/utsname.h" -#include "asm/prctl.h" /* XXX This should get the constants from libc */ -#include "asm/uaccess.h" -#include "os.h" +#include +#include /* XXX This should get the constants from libc */ +#include long arch_prctl(struct task_struct *task, int code, unsigned long __user *addr) { @@ -79,20 +76,6 @@ long sys_arch_prctl(int code, unsigned long addr) return arch_prctl(current, code, (unsigned long __user *) addr); } -long sys_clone(unsigned long clone_flags, unsigned long newsp, - void __user *parent_tid, void __user *child_tid) -{ - long ret; - - if (!newsp) - newsp = UPT_SP(¤t->thread.regs.regs); - current->thread.forking = 1; - ret = do_fork(clone_flags, newsp, ¤t->thread.regs, 0, parent_tid, - child_tid); - current->thread.forking = 0; - return ret; -} - void arch_switch_to(struct task_struct *to) { if ((to->thread.arch.fs == 0) || (to->mm == NULL)) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index bf4bda6d3e9ad66f19af6e4669063a12739c78db..1fbe75a95f15953d3d0ed6cd0dd7c911a88eac0b 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include @@ -1453,6 +1452,10 @@ asmlinkage void __init xen_start_kernel(void) pci_request_acs(); xen_acpi_sleep_register(); + + /* Avoid searching for BIOS MP tables */ + x86_init.mpparse.find_smp_config = x86_init_noop; + x86_init.mpparse.get_smp_config = x86_init_uint_noop; } #ifdef CONFIG_PCI /* PCI BIOS service won't work from a PV guest. */ @@ -1470,130 +1473,38 @@ asmlinkage void __init xen_start_kernel(void) #endif } -#ifdef CONFIG_XEN_PVHVM -/* - * The pfn containing the shared_info is located somewhere in RAM. This - * will cause trouble if the current kernel is doing a kexec boot into a - * new kernel. The new kernel (and its startup code) can not know where - * the pfn is, so it can not reserve the page. The hypervisor will - * continue to update the pfn, and as a result memory corruption occours - * in the new kernel. - * - * One way to work around this issue is to allocate a page in the - * xen-platform pci device's BAR memory range. But pci init is done very - * late and the shared_info page is already in use very early to read - * the pvclock. So moving the pfn from RAM to MMIO is racy because some - * code paths on other vcpus could access the pfn during the small - * window when the old pfn is moved to the new pfn. There is even a - * small window were the old pfn is not backed by a mfn, and during that - * time all reads return -1. - * - * Because it is not known upfront where the MMIO region is located it - * can not be used right from the start in xen_hvm_init_shared_info. - * - * To minimise trouble the move of the pfn is done shortly before kexec. - * This does not eliminate the race because all vcpus are still online - * when the syscore_ops will be called. But hopefully there is no work - * pending at this point in time. Also the syscore_op is run last which - * reduces the risk further. - */ - -static struct shared_info *xen_hvm_shared_info; - -static void xen_hvm_connect_shared_info(unsigned long pfn) +void __ref xen_hvm_init_shared_info(void) { + int cpu; struct xen_add_to_physmap xatp; + static struct shared_info *shared_info_page = 0; + if (!shared_info_page) + shared_info_page = (struct shared_info *) + extend_brk(PAGE_SIZE, PAGE_SIZE); xatp.domid = DOMID_SELF; xatp.idx = 0; xatp.space = XENMAPSPACE_shared_info; - xatp.gpfn = pfn; + xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT; if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp)) BUG(); -} -static void xen_hvm_set_shared_info(struct shared_info *sip) -{ - int cpu; - - HYPERVISOR_shared_info = sip; + HYPERVISOR_shared_info = (struct shared_info *)shared_info_page; /* xen_vcpu is a pointer to the vcpu_info struct in the shared_info * page, we use it in the event channel upcall and in some pvclock * related functions. We don't need the vcpu_info placement * optimizations because we don't use any pv_mmu or pv_irq op on * HVM. - * When xen_hvm_set_shared_info is run at boot time only vcpu 0 is - * online but xen_hvm_set_shared_info is run at resume time too and + * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is + * online but xen_hvm_init_shared_info is run at resume time too and * in that case multiple vcpus might be online. */ for_each_online_cpu(cpu) { per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; } } -/* Reconnect the shared_info pfn to a mfn */ -void xen_hvm_resume_shared_info(void) -{ - xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT); -} - -#ifdef CONFIG_KEXEC -static struct shared_info *xen_hvm_shared_info_kexec; -static unsigned long xen_hvm_shared_info_pfn_kexec; - -/* Remember a pfn in MMIO space for kexec reboot */ -void __devinit xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn) -{ - xen_hvm_shared_info_kexec = sip; - xen_hvm_shared_info_pfn_kexec = pfn; -} - -static void xen_hvm_syscore_shutdown(void) -{ - struct xen_memory_reservation reservation = { - .domid = DOMID_SELF, - .nr_extents = 1, - }; - unsigned long prev_pfn; - int rc; - - if (!xen_hvm_shared_info_kexec) - return; - - prev_pfn = __pa(xen_hvm_shared_info) >> PAGE_SHIFT; - set_xen_guest_handle(reservation.extent_start, &prev_pfn); - - /* Move pfn to MMIO, disconnects previous pfn from mfn */ - xen_hvm_connect_shared_info(xen_hvm_shared_info_pfn_kexec); - - /* Update pointers, following hypercall is also a memory barrier */ - xen_hvm_set_shared_info(xen_hvm_shared_info_kexec); - - /* Allocate new mfn for previous pfn */ - do { - rc = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation); - if (rc == 0) - msleep(123); - } while (rc == 0); - - /* Make sure the previous pfn is really connected to a (new) mfn */ - BUG_ON(rc != 1); -} - -static struct syscore_ops xen_hvm_syscore_ops = { - .shutdown = xen_hvm_syscore_shutdown, -}; -#endif - -/* Use a pfn in RAM, may move to MMIO before kexec. */ -static void __init xen_hvm_init_shared_info(void) -{ - /* Remember pointer for resume */ - xen_hvm_shared_info = extend_brk(PAGE_SIZE, PAGE_SIZE); - xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT); - xen_hvm_set_shared_info(xen_hvm_shared_info); -} - +#ifdef CONFIG_XEN_PVHVM static void __init init_hvm_pv_info(void) { int major, minor; @@ -1644,9 +1555,6 @@ static void __init xen_hvm_guest_init(void) init_hvm_pv_info(); xen_hvm_init_shared_info(); -#ifdef CONFIG_KEXEC - register_syscore_ops(&xen_hvm_syscore_ops); -#endif if (xen_feature(XENFEAT_hvm_callback_vector)) xen_have_vector_callback = 1; diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index b65a76133f4f9b4f51dc426021975d7a5427191e..5141d808e7519d8f38ca8c001e4e5c6c7b318956 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1283,7 +1283,7 @@ static void xen_flush_tlb_others(const struct cpumask *cpus, cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask)); args->op.cmd = MMUEXT_TLB_FLUSH_MULTI; - if (start != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) { + if (end != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) { args->op.cmd = MMUEXT_INVLPG_MULTI; args->op.arg1.linear_addr = start; } diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index 64effdc6da9400c09515af384d3d4b94c8efcb50..72213da605f50c07f3684ca07d351a8bbd7435ef 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -194,6 +194,13 @@ RESERVE_BRK(p2m_mid_mfn, PAGE_SIZE * (MAX_DOMAIN_PAGES / (P2M_PER_PAGE * P2M_MID * boundary violation will require three middle nodes. */ RESERVE_BRK(p2m_mid_identity, PAGE_SIZE * 2 * 3); +/* When we populate back during bootup, the amount of pages can vary. The + * max we have is seen is 395979, but that does not mean it can't be more. + * Some machines can have 3GB I/O holes even. With early_can_reuse_p2m_middle + * it can re-use Xen provided mfn_list array, so we only need to allocate at + * most three P2M top nodes. */ +RESERVE_BRK(p2m_populated, PAGE_SIZE * 3); + static inline unsigned p2m_top_index(unsigned long pfn) { BUG_ON(pfn >= MAX_P2M_PFN); @@ -570,12 +577,99 @@ static bool __init early_alloc_p2m(unsigned long pfn) } return true; } + +/* + * Skim over the P2M tree looking at pages that are either filled with + * INVALID_P2M_ENTRY or with 1:1 PFNs. If found, re-use that page and + * replace the P2M leaf with a p2m_missing or p2m_identity. + * Stick the old page in the new P2M tree location. + */ +bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_mfn) +{ + unsigned topidx; + unsigned mididx; + unsigned ident_pfns; + unsigned inv_pfns; + unsigned long *p2m; + unsigned long *mid_mfn_p; + unsigned idx; + unsigned long pfn; + + /* We only look when this entails a P2M middle layer */ + if (p2m_index(set_pfn)) + return false; + + for (pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) { + topidx = p2m_top_index(pfn); + + if (!p2m_top[topidx]) + continue; + + if (p2m_top[topidx] == p2m_mid_missing) + continue; + + mididx = p2m_mid_index(pfn); + p2m = p2m_top[topidx][mididx]; + if (!p2m) + continue; + + if ((p2m == p2m_missing) || (p2m == p2m_identity)) + continue; + + if ((unsigned long)p2m == INVALID_P2M_ENTRY) + continue; + + ident_pfns = 0; + inv_pfns = 0; + for (idx = 0; idx < P2M_PER_PAGE; idx++) { + /* IDENTITY_PFNs are 1:1 */ + if (p2m[idx] == IDENTITY_FRAME(pfn + idx)) + ident_pfns++; + else if (p2m[idx] == INVALID_P2M_ENTRY) + inv_pfns++; + else + break; + } + if ((ident_pfns == P2M_PER_PAGE) || (inv_pfns == P2M_PER_PAGE)) + goto found; + } + return false; +found: + /* Found one, replace old with p2m_identity or p2m_missing */ + p2m_top[topidx][mididx] = (ident_pfns ? p2m_identity : p2m_missing); + /* And the other for save/restore.. */ + mid_mfn_p = p2m_top_mfn_p[topidx]; + /* NOTE: Even if it is a p2m_identity it should still be point to + * a page filled with INVALID_P2M_ENTRY entries. */ + mid_mfn_p[mididx] = virt_to_mfn(p2m_missing); + + /* Reset where we want to stick the old page in. */ + topidx = p2m_top_index(set_pfn); + mididx = p2m_mid_index(set_pfn); + + /* This shouldn't happen */ + if (WARN_ON(p2m_top[topidx] == p2m_mid_missing)) + early_alloc_p2m(set_pfn); + + if (WARN_ON(p2m_top[topidx][mididx] != p2m_missing)) + return false; + + p2m_init(p2m); + p2m_top[topidx][mididx] = p2m; + mid_mfn_p = p2m_top_mfn_p[topidx]; + mid_mfn_p[mididx] = virt_to_mfn(p2m); + + return true; +} bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn) { if (unlikely(!__set_phys_to_machine(pfn, mfn))) { if (!early_alloc_p2m(pfn)) return false; + if (early_can_reuse_p2m_middle(pfn, mfn)) + return __set_phys_to_machine(pfn, mfn); + if (!early_alloc_p2m_middle(pfn, false /* boundary crossover OK!*/)) return false; @@ -734,9 +828,6 @@ int m2p_add_override(unsigned long mfn, struct page *page, xen_mc_issue(PARAVIRT_LAZY_MMU); } - /* let's use dev_bus_addr to record the old mfn instead */ - kmap_op->dev_bus_addr = page->index; - page->index = (unsigned long) kmap_op; } spin_lock_irqsave(&m2p_override_lock, flags); list_add(&page->lru, &m2p_overrides[mfn_hash(mfn)]); @@ -763,7 +854,8 @@ int m2p_add_override(unsigned long mfn, struct page *page, return 0; } EXPORT_SYMBOL_GPL(m2p_add_override); -int m2p_remove_override(struct page *page, bool clear_pte) +int m2p_remove_override(struct page *page, + struct gnttab_map_grant_ref *kmap_op) { unsigned long flags; unsigned long mfn; @@ -793,10 +885,8 @@ int m2p_remove_override(struct page *page, bool clear_pte) WARN_ON(!PagePrivate(page)); ClearPagePrivate(page); - if (clear_pte) { - struct gnttab_map_grant_ref *map_op = - (struct gnttab_map_grant_ref *) page->index; - set_phys_to_machine(pfn, map_op->dev_bus_addr); + set_phys_to_machine(pfn, page->index); + if (kmap_op != NULL) { if (!PageHighMem(page)) { struct multicall_space mcs; struct gnttab_unmap_grant_ref *unmap_op; @@ -808,13 +898,13 @@ int m2p_remove_override(struct page *page, bool clear_pte) * issued. In this case handle is going to -1 because * it hasn't been modified yet. */ - if (map_op->handle == -1) + if (kmap_op->handle == -1) xen_mc_flush(); /* - * Now if map_op->handle is negative it means that the + * Now if kmap_op->handle is negative it means that the * hypercall actually returned an error. */ - if (map_op->handle == GNTST_general_error) { + if (kmap_op->handle == GNTST_general_error) { printk(KERN_WARNING "m2p_remove_override: " "pfn %lx mfn %lx, failed to modify kernel mappings", pfn, mfn); @@ -824,8 +914,8 @@ int m2p_remove_override(struct page *page, bool clear_pte) mcs = xen_mc_entry( sizeof(struct gnttab_unmap_grant_ref)); unmap_op = mcs.args; - unmap_op->host_addr = map_op->host_addr; - unmap_op->handle = map_op->handle; + unmap_op->host_addr = kmap_op->host_addr; + unmap_op->handle = kmap_op->handle; unmap_op->dev_bus_addr = 0; MULTI_grant_table_op(mcs.mc, @@ -836,10 +926,9 @@ int m2p_remove_override(struct page *page, bool clear_pte) set_pte_at(&init_mm, address, ptep, pfn_pte(pfn, PAGE_KERNEL)); __flush_tlb_single(address); - map_op->host_addr = 0; + kmap_op->host_addr = 0; } - } else - set_phys_to_machine(pfn, page->index); + } /* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present * somewhere in this domain, even before being added to the diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index ead85576d54a6c097f10b9a9d55e2057575e2168..e2d62d697b5dffc60ad6ea53e2ad3f1ce33282a3 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -78,9 +79,16 @@ static void __init xen_add_extra_mem(u64 start, u64 size) memblock_reserve(start, size); xen_max_p2m_pfn = PFN_DOWN(start + size); + for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) { + unsigned long mfn = pfn_to_mfn(pfn); + + if (WARN(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn)) + continue; + WARN(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n", + pfn, mfn); - for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++) __set_phys_to_machine(pfn, INVALID_P2M_ENTRY); + } } static unsigned long __init xen_do_chunk(unsigned long start, @@ -537,4 +545,7 @@ void __init xen_arch_setup(void) disable_cpufreq(); WARN_ON(set_pm_idle_to_default()); fiddle_vdso(); +#ifdef CONFIG_NUMA + numa_off = 1; +#endif } diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index ae8a00c39de4b0d02cfad0722715d0fbd159a1cb..45329c8c226e4c4070f16a791b300265a0bf472b 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -30,7 +30,7 @@ void xen_arch_hvm_post_suspend(int suspend_cancelled) { #ifdef CONFIG_XEN_PVHVM int cpu; - xen_hvm_resume_shared_info(); + xen_hvm_init_shared_info(); xen_callback_vector(); xen_unplug_emulated_devices(); if (xen_feature(XENFEAT_hvm_safe_pvclock)) { diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 1e4329e04e0fbf105467f18b009183c9dcebd2a8..202d4c150154fb31ddb03da8f8144a45f21c02a7 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -41,7 +41,7 @@ void xen_enable_syscall(void); void xen_vcpu_restore(void); void xen_callback_vector(void); -void xen_hvm_resume_shared_info(void); +void xen_hvm_init_shared_info(void); void xen_unplug_emulated_devices(void); void __init xen_build_dynamic_phys_to_machine(void); diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 8a3f8351f4380d5ff8da08978ceb83fd4d19d689..8ed64cfae4ff1f46953315f04853ce06831394f5 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -7,6 +7,7 @@ config ZONE_DMA config XTENSA def_bool y select HAVE_IDE + select GENERIC_ATOMIC64 select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW select GENERIC_CPU_DEVICES diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index e7dee617358e810aec57ff25162ff95604fabb3c..f3b44a65fc7ad5f127bee8bcbadf5b486a7e5c71 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -31,27 +31,6 @@ EXPORT_SYMBOL_GPL(blkcg_root); static struct blkcg_policy *blkcg_policy[BLKCG_MAX_POLS]; -struct blkcg *cgroup_to_blkcg(struct cgroup *cgroup) -{ - return container_of(cgroup_subsys_state(cgroup, blkio_subsys_id), - struct blkcg, css); -} -EXPORT_SYMBOL_GPL(cgroup_to_blkcg); - -static struct blkcg *task_blkcg(struct task_struct *tsk) -{ - return container_of(task_subsys_state(tsk, blkio_subsys_id), - struct blkcg, css); -} - -struct blkcg *bio_blkcg(struct bio *bio) -{ - if (bio && bio->bi_css) - return container_of(bio->bi_css, struct blkcg, css); - return task_blkcg(current); -} -EXPORT_SYMBOL_GPL(bio_blkcg); - static bool blkcg_policy_enabled(struct request_queue *q, const struct blkcg_policy *pol) { @@ -84,6 +63,7 @@ static void blkg_free(struct blkcg_gq *blkg) kfree(pd); } + blk_exit_rl(&blkg->rl); kfree(blkg); } @@ -91,16 +71,18 @@ static void blkg_free(struct blkcg_gq *blkg) * blkg_alloc - allocate a blkg * @blkcg: block cgroup the new blkg is associated with * @q: request_queue the new blkg is associated with + * @gfp_mask: allocation mask to use * * Allocate a new blkg assocating @blkcg and @q. */ -static struct blkcg_gq *blkg_alloc(struct blkcg *blkcg, struct request_queue *q) +static struct blkcg_gq *blkg_alloc(struct blkcg *blkcg, struct request_queue *q, + gfp_t gfp_mask) { struct blkcg_gq *blkg; int i; /* alloc and init base part */ - blkg = kzalloc_node(sizeof(*blkg), GFP_ATOMIC, q->node); + blkg = kzalloc_node(sizeof(*blkg), gfp_mask, q->node); if (!blkg) return NULL; @@ -109,6 +91,13 @@ static struct blkcg_gq *blkg_alloc(struct blkcg *blkcg, struct request_queue *q) blkg->blkcg = blkcg; blkg->refcnt = 1; + /* root blkg uses @q->root_rl, init rl only for !root blkgs */ + if (blkcg != &blkcg_root) { + if (blk_init_rl(&blkg->rl, q, gfp_mask)) + goto err_free; + blkg->rl.blkg = blkg; + } + for (i = 0; i < BLKCG_MAX_POLS; i++) { struct blkcg_policy *pol = blkcg_policy[i]; struct blkg_policy_data *pd; @@ -117,11 +106,9 @@ static struct blkcg_gq *blkg_alloc(struct blkcg *blkcg, struct request_queue *q) continue; /* alloc per-policy data and attach it to blkg */ - pd = kzalloc_node(pol->pd_size, GFP_ATOMIC, q->node); - if (!pd) { - blkg_free(blkg); - return NULL; - } + pd = kzalloc_node(pol->pd_size, gfp_mask, q->node); + if (!pd) + goto err_free; blkg->pd[i] = pd; pd->blkg = blkg; @@ -132,6 +119,10 @@ static struct blkcg_gq *blkg_alloc(struct blkcg *blkcg, struct request_queue *q) } return blkg; + +err_free: + blkg_free(blkg); + return NULL; } static struct blkcg_gq *__blkg_lookup(struct blkcg *blkcg, @@ -175,9 +166,13 @@ struct blkcg_gq *blkg_lookup(struct blkcg *blkcg, struct request_queue *q) } EXPORT_SYMBOL_GPL(blkg_lookup); +/* + * If @new_blkg is %NULL, this function tries to allocate a new one as + * necessary using %GFP_ATOMIC. @new_blkg is always consumed on return. + */ static struct blkcg_gq *__blkg_lookup_create(struct blkcg *blkcg, - struct request_queue *q) - __releases(q->queue_lock) __acquires(q->queue_lock) + struct request_queue *q, + struct blkcg_gq *new_blkg) { struct blkcg_gq *blkg; int ret; @@ -189,24 +184,26 @@ static struct blkcg_gq *__blkg_lookup_create(struct blkcg *blkcg, blkg = __blkg_lookup(blkcg, q); if (blkg) { rcu_assign_pointer(blkcg->blkg_hint, blkg); - return blkg; + goto out_free; } /* blkg holds a reference to blkcg */ - if (!css_tryget(&blkcg->css)) - return ERR_PTR(-EINVAL); + if (!css_tryget(&blkcg->css)) { + blkg = ERR_PTR(-EINVAL); + goto out_free; + } /* allocate */ - ret = -ENOMEM; - blkg = blkg_alloc(blkcg, q); - if (unlikely(!blkg)) - goto err_put; + if (!new_blkg) { + new_blkg = blkg_alloc(blkcg, q, GFP_ATOMIC); + if (unlikely(!new_blkg)) { + blkg = ERR_PTR(-ENOMEM); + goto out_put; + } + } + blkg = new_blkg; /* insert */ - ret = radix_tree_preload(GFP_ATOMIC); - if (ret) - goto err_free; - spin_lock(&blkcg->lock); ret = radix_tree_insert(&blkcg->blkg_tree, q->id, blkg); if (likely(!ret)) { @@ -215,15 +212,15 @@ static struct blkcg_gq *__blkg_lookup_create(struct blkcg *blkcg, } spin_unlock(&blkcg->lock); - radix_tree_preload_end(); - if (!ret) return blkg; -err_free: - blkg_free(blkg); -err_put: + + blkg = ERR_PTR(ret); +out_put: css_put(&blkcg->css); - return ERR_PTR(ret); +out_free: + blkg_free(new_blkg); + return blkg; } struct blkcg_gq *blkg_lookup_create(struct blkcg *blkcg, @@ -235,7 +232,7 @@ struct blkcg_gq *blkg_lookup_create(struct blkcg *blkcg, */ if (unlikely(blk_queue_bypass(q))) return ERR_PTR(blk_queue_dead(q) ? -EINVAL : -EBUSY); - return __blkg_lookup_create(blkcg, q); + return __blkg_lookup_create(blkcg, q, NULL); } EXPORT_SYMBOL_GPL(blkg_lookup_create); @@ -313,6 +310,38 @@ void __blkg_release(struct blkcg_gq *blkg) } EXPORT_SYMBOL_GPL(__blkg_release); +/* + * The next function used by blk_queue_for_each_rl(). It's a bit tricky + * because the root blkg uses @q->root_rl instead of its own rl. + */ +struct request_list *__blk_queue_next_rl(struct request_list *rl, + struct request_queue *q) +{ + struct list_head *ent; + struct blkcg_gq *blkg; + + /* + * Determine the current blkg list_head. The first entry is + * root_rl which is off @q->blkg_list and mapped to the head. + */ + if (rl == &q->root_rl) { + ent = &q->blkg_list; + } else { + blkg = container_of(rl, struct blkcg_gq, rl); + ent = &blkg->q_node; + } + + /* walk to the next list_head, skip root blkcg */ + ent = ent->next; + if (ent == &q->root_blkg->q_node) + ent = ent->next; + if (ent == &q->blkg_list) + return NULL; + + blkg = container_of(ent, struct blkcg_gq, q_node); + return &blkg->rl; +} + static int blkcg_reset_stats(struct cgroup *cgroup, struct cftype *cftype, u64 val) { @@ -734,24 +763,36 @@ int blkcg_activate_policy(struct request_queue *q, struct blkcg_gq *blkg; struct blkg_policy_data *pd, *n; int cnt = 0, ret; + bool preloaded; if (blkcg_policy_enabled(q, pol)) return 0; + /* preallocations for root blkg */ + blkg = blkg_alloc(&blkcg_root, q, GFP_KERNEL); + if (!blkg) + return -ENOMEM; + + preloaded = !radix_tree_preload(GFP_KERNEL); + blk_queue_bypass_start(q); /* make sure the root blkg exists and count the existing blkgs */ spin_lock_irq(q->queue_lock); rcu_read_lock(); - blkg = __blkg_lookup_create(&blkcg_root, q); + blkg = __blkg_lookup_create(&blkcg_root, q, blkg); rcu_read_unlock(); + if (preloaded) + radix_tree_preload_end(); + if (IS_ERR(blkg)) { ret = PTR_ERR(blkg); goto out_unlock; } q->root_blkg = blkg; + q->root_rl.blkg = blkg; list_for_each_entry(blkg, &q->blkg_list, q_node) cnt++; diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h index 8ac457ce7783847522c1340c008d3c7789f3a1b2..24597309e23d38700a6ca2ae80cd9aab71aa3474 100644 --- a/block/blk-cgroup.h +++ b/block/blk-cgroup.h @@ -17,6 +17,7 @@ #include #include #include +#include /* Max limits for throttle policy */ #define THROTL_IOPS_MAX UINT_MAX @@ -93,6 +94,8 @@ struct blkcg_gq { struct list_head q_node; struct hlist_node blkcg_node; struct blkcg *blkcg; + /* request allocation list for this blkcg-q pair */ + struct request_list rl; /* reference count */ int refcnt; @@ -120,8 +123,6 @@ struct blkcg_policy { extern struct blkcg blkcg_root; -struct blkcg *cgroup_to_blkcg(struct cgroup *cgroup); -struct blkcg *bio_blkcg(struct bio *bio); struct blkcg_gq *blkg_lookup(struct blkcg *blkcg, struct request_queue *q); struct blkcg_gq *blkg_lookup_create(struct blkcg *blkcg, struct request_queue *q); @@ -160,6 +161,25 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, void blkg_conf_finish(struct blkg_conf_ctx *ctx); +static inline struct blkcg *cgroup_to_blkcg(struct cgroup *cgroup) +{ + return container_of(cgroup_subsys_state(cgroup, blkio_subsys_id), + struct blkcg, css); +} + +static inline struct blkcg *task_blkcg(struct task_struct *tsk) +{ + return container_of(task_subsys_state(tsk, blkio_subsys_id), + struct blkcg, css); +} + +static inline struct blkcg *bio_blkcg(struct bio *bio) +{ + if (bio && bio->bi_css) + return container_of(bio->bi_css, struct blkcg, css); + return task_blkcg(current); +} + /** * blkg_to_pdata - get policy private data * @blkg: blkg of interest @@ -233,6 +253,95 @@ static inline void blkg_put(struct blkcg_gq *blkg) __blkg_release(blkg); } +/** + * blk_get_rl - get request_list to use + * @q: request_queue of interest + * @bio: bio which will be attached to the allocated request (may be %NULL) + * + * The caller wants to allocate a request from @q to use for @bio. Find + * the request_list to use and obtain a reference on it. Should be called + * under queue_lock. This function is guaranteed to return non-%NULL + * request_list. + */ +static inline struct request_list *blk_get_rl(struct request_queue *q, + struct bio *bio) +{ + struct blkcg *blkcg; + struct blkcg_gq *blkg; + + rcu_read_lock(); + + blkcg = bio_blkcg(bio); + + /* bypass blkg lookup and use @q->root_rl directly for root */ + if (blkcg == &blkcg_root) + goto root_rl; + + /* + * Try to use blkg->rl. blkg lookup may fail under memory pressure + * or if either the blkcg or queue is going away. Fall back to + * root_rl in such cases. + */ + blkg = blkg_lookup_create(blkcg, q); + if (unlikely(IS_ERR(blkg))) + goto root_rl; + + blkg_get(blkg); + rcu_read_unlock(); + return &blkg->rl; +root_rl: + rcu_read_unlock(); + return &q->root_rl; +} + +/** + * blk_put_rl - put request_list + * @rl: request_list to put + * + * Put the reference acquired by blk_get_rl(). Should be called under + * queue_lock. + */ +static inline void blk_put_rl(struct request_list *rl) +{ + /* root_rl may not have blkg set */ + if (rl->blkg && rl->blkg->blkcg != &blkcg_root) + blkg_put(rl->blkg); +} + +/** + * blk_rq_set_rl - associate a request with a request_list + * @rq: request of interest + * @rl: target request_list + * + * Associate @rq with @rl so that accounting and freeing can know the + * request_list @rq came from. + */ +static inline void blk_rq_set_rl(struct request *rq, struct request_list *rl) +{ + rq->rl = rl; +} + +/** + * blk_rq_rl - return the request_list a request came from + * @rq: request of interest + * + * Return the request_list @rq is allocated from. + */ +static inline struct request_list *blk_rq_rl(struct request *rq) +{ + return rq->rl; +} + +struct request_list *__blk_queue_next_rl(struct request_list *rl, + struct request_queue *q); +/** + * blk_queue_for_each_rl - iterate through all request_lists of a request_queue + * + * Should be used under queue_lock. + */ +#define blk_queue_for_each_rl(rl, q) \ + for ((rl) = &(q)->root_rl; (rl); (rl) = __blk_queue_next_rl((rl), (q))) + /** * blkg_stat_add - add a value to a blkg_stat * @stat: target blkg_stat @@ -351,6 +460,7 @@ static inline void blkg_rwstat_reset(struct blkg_rwstat *rwstat) #else /* CONFIG_BLK_CGROUP */ struct cgroup; +struct blkcg; struct blkg_policy_data { }; @@ -361,8 +471,6 @@ struct blkcg_gq { struct blkcg_policy { }; -static inline struct blkcg *cgroup_to_blkcg(struct cgroup *cgroup) { return NULL; } -static inline struct blkcg *bio_blkcg(struct bio *bio) { return NULL; } static inline struct blkcg_gq *blkg_lookup(struct blkcg *blkcg, void *key) { return NULL; } static inline int blkcg_init_queue(struct request_queue *q) { return 0; } static inline void blkcg_drain_queue(struct request_queue *q) { } @@ -374,6 +482,9 @@ static inline int blkcg_activate_policy(struct request_queue *q, static inline void blkcg_deactivate_policy(struct request_queue *q, const struct blkcg_policy *pol) { } +static inline struct blkcg *cgroup_to_blkcg(struct cgroup *cgroup) { return NULL; } +static inline struct blkcg *bio_blkcg(struct bio *bio) { return NULL; } + static inline struct blkg_policy_data *blkg_to_pd(struct blkcg_gq *blkg, struct blkcg_policy *pol) { return NULL; } static inline struct blkcg_gq *pd_to_blkg(struct blkg_policy_data *pd) { return NULL; } @@ -381,5 +492,14 @@ static inline char *blkg_path(struct blkcg_gq *blkg) { return NULL; } static inline void blkg_get(struct blkcg_gq *blkg) { } static inline void blkg_put(struct blkcg_gq *blkg) { } +static inline struct request_list *blk_get_rl(struct request_queue *q, + struct bio *bio) { return &q->root_rl; } +static inline void blk_put_rl(struct request_list *rl) { } +static inline void blk_rq_set_rl(struct request *rq, struct request_list *rl) { } +static inline struct request_list *blk_rq_rl(struct request *rq) { return &rq->q->root_rl; } + +#define blk_queue_for_each_rl(rl, q) \ + for ((rl) = &(q)->root_rl; (rl); (rl) = NULL) + #endif /* CONFIG_BLK_CGROUP */ #endif /* _BLK_CGROUP_H */ diff --git a/block/blk-core.c b/block/blk-core.c index 93eb3e4f88ce78affc79c5ca6d8b7c7b0759be5a..ee3cb3a5e2782292bba4807c0d9cc887de48a31e 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -387,7 +387,7 @@ void blk_drain_queue(struct request_queue *q, bool drain_all) if (!list_empty(&q->queue_head) && q->request_fn) __blk_run_queue(q); - drain |= q->rq.elvpriv; + drain |= q->nr_rqs_elvpriv; /* * Unfortunately, requests are queued at and tracked from @@ -397,7 +397,7 @@ void blk_drain_queue(struct request_queue *q, bool drain_all) if (drain_all) { drain |= !list_empty(&q->queue_head); for (i = 0; i < 2; i++) { - drain |= q->rq.count[i]; + drain |= q->nr_rqs[i]; drain |= q->in_flight[i]; drain |= !list_empty(&q->flush_queue[i]); } @@ -416,9 +416,14 @@ void blk_drain_queue(struct request_queue *q, bool drain_all) * left with hung waiters. We need to wake up those waiters. */ if (q->request_fn) { + struct request_list *rl; + spin_lock_irq(q->queue_lock); - for (i = 0; i < ARRAY_SIZE(q->rq.wait); i++) - wake_up_all(&q->rq.wait[i]); + + blk_queue_for_each_rl(rl, q) + for (i = 0; i < ARRAY_SIZE(rl->wait); i++) + wake_up_all(&rl->wait[i]); + spin_unlock_irq(q->queue_lock); } } @@ -517,28 +522,33 @@ void blk_cleanup_queue(struct request_queue *q) } EXPORT_SYMBOL(blk_cleanup_queue); -static int blk_init_free_list(struct request_queue *q) +int blk_init_rl(struct request_list *rl, struct request_queue *q, + gfp_t gfp_mask) { - struct request_list *rl = &q->rq; - if (unlikely(rl->rq_pool)) return 0; + rl->q = q; rl->count[BLK_RW_SYNC] = rl->count[BLK_RW_ASYNC] = 0; rl->starved[BLK_RW_SYNC] = rl->starved[BLK_RW_ASYNC] = 0; - rl->elvpriv = 0; init_waitqueue_head(&rl->wait[BLK_RW_SYNC]); init_waitqueue_head(&rl->wait[BLK_RW_ASYNC]); rl->rq_pool = mempool_create_node(BLKDEV_MIN_RQ, mempool_alloc_slab, - mempool_free_slab, request_cachep, q->node); - + mempool_free_slab, request_cachep, + gfp_mask, q->node); if (!rl->rq_pool) return -ENOMEM; return 0; } +void blk_exit_rl(struct request_list *rl) +{ + if (rl->rq_pool) + mempool_destroy(rl->rq_pool); +} + struct request_queue *blk_alloc_queue(gfp_t gfp_mask) { return blk_alloc_queue_node(gfp_mask, -1); @@ -680,7 +690,7 @@ blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn, if (!q) return NULL; - if (blk_init_free_list(q)) + if (blk_init_rl(&q->root_rl, q, GFP_KERNEL)) return NULL; q->request_fn = rfn; @@ -722,15 +732,15 @@ bool blk_get_queue(struct request_queue *q) } EXPORT_SYMBOL(blk_get_queue); -static inline void blk_free_request(struct request_queue *q, struct request *rq) +static inline void blk_free_request(struct request_list *rl, struct request *rq) { if (rq->cmd_flags & REQ_ELVPRIV) { - elv_put_request(q, rq); + elv_put_request(rl->q, rq); if (rq->elv.icq) put_io_context(rq->elv.icq->ioc); } - mempool_free(rq, q->rq.rq_pool); + mempool_free(rq, rl->rq_pool); } /* @@ -767,18 +777,23 @@ static void ioc_set_batching(struct request_queue *q, struct io_context *ioc) ioc->last_waited = jiffies; } -static void __freed_request(struct request_queue *q, int sync) +static void __freed_request(struct request_list *rl, int sync) { - struct request_list *rl = &q->rq; + struct request_queue *q = rl->q; - if (rl->count[sync] < queue_congestion_off_threshold(q)) + /* + * bdi isn't aware of blkcg yet. As all async IOs end up root + * blkcg anyway, just use root blkcg state. + */ + if (rl == &q->root_rl && + rl->count[sync] < queue_congestion_off_threshold(q)) blk_clear_queue_congested(q, sync); if (rl->count[sync] + 1 <= q->nr_requests) { if (waitqueue_active(&rl->wait[sync])) wake_up(&rl->wait[sync]); - blk_clear_queue_full(q, sync); + blk_clear_rl_full(rl, sync); } } @@ -786,19 +801,20 @@ static void __freed_request(struct request_queue *q, int sync) * A request has just been released. Account for it, update the full and * congestion status, wake up any waiters. Called under q->queue_lock. */ -static void freed_request(struct request_queue *q, unsigned int flags) +static void freed_request(struct request_list *rl, unsigned int flags) { - struct request_list *rl = &q->rq; + struct request_queue *q = rl->q; int sync = rw_is_sync(flags); + q->nr_rqs[sync]--; rl->count[sync]--; if (flags & REQ_ELVPRIV) - rl->elvpriv--; + q->nr_rqs_elvpriv--; - __freed_request(q, sync); + __freed_request(rl, sync); if (unlikely(rl->starved[sync ^ 1])) - __freed_request(q, sync ^ 1); + __freed_request(rl, sync ^ 1); } /* @@ -837,8 +853,8 @@ static struct io_context *rq_ioc(struct bio *bio) } /** - * get_request - get a free request - * @q: request_queue to allocate request from + * __get_request - get a free request + * @rl: request list to allocate from * @rw_flags: RW and SYNC flags * @bio: bio to allocate request for (can be %NULL) * @gfp_mask: allocation mask @@ -850,20 +866,16 @@ static struct io_context *rq_ioc(struct bio *bio) * Returns %NULL on failure, with @q->queue_lock held. * Returns !%NULL on success, with @q->queue_lock *not held*. */ -static struct request *get_request(struct request_queue *q, int rw_flags, - struct bio *bio, gfp_t gfp_mask) +static struct request *__get_request(struct request_list *rl, int rw_flags, + struct bio *bio, gfp_t gfp_mask) { + struct request_queue *q = rl->q; struct request *rq; - struct request_list *rl = &q->rq; - struct elevator_type *et; - struct io_context *ioc; + struct elevator_type *et = q->elevator->type; + struct io_context *ioc = rq_ioc(bio); struct io_cq *icq = NULL; const bool is_sync = rw_is_sync(rw_flags) != 0; - bool retried = false; int may_queue; -retry: - et = q->elevator->type; - ioc = rq_ioc(bio); if (unlikely(blk_queue_dead(q))) return NULL; @@ -874,29 +886,15 @@ static struct request *get_request(struct request_queue *q, int rw_flags, if (rl->count[is_sync]+1 >= queue_congestion_on_threshold(q)) { if (rl->count[is_sync]+1 >= q->nr_requests) { - /* - * We want ioc to record batching state. If it's - * not already there, creating a new one requires - * dropping queue_lock, which in turn requires - * retesting conditions to avoid queue hang. - */ - if (!ioc && !retried) { - spin_unlock_irq(q->queue_lock); - create_io_context(gfp_mask, q->node); - spin_lock_irq(q->queue_lock); - retried = true; - goto retry; - } - /* * The queue will fill after this allocation, so set * it as full, and mark this process as "batching". * This process will be allowed to complete a batch of * requests, others will be blocked. */ - if (!blk_queue_full(q, is_sync)) { + if (!blk_rl_full(rl, is_sync)) { ioc_set_batching(q, ioc); - blk_set_queue_full(q, is_sync); + blk_set_rl_full(rl, is_sync); } else { if (may_queue != ELV_MQUEUE_MUST && !ioc_batching(q, ioc)) { @@ -909,7 +907,12 @@ static struct request *get_request(struct request_queue *q, int rw_flags, } } } - blk_set_queue_congested(q, is_sync); + /* + * bdi isn't aware of blkcg yet. As all async IOs end up + * root blkcg anyway, just use root blkcg state. + */ + if (rl == &q->root_rl) + blk_set_queue_congested(q, is_sync); } /* @@ -920,6 +923,7 @@ static struct request *get_request(struct request_queue *q, int rw_flags, if (rl->count[is_sync] >= (3 * q->nr_requests / 2)) return NULL; + q->nr_rqs[is_sync]++; rl->count[is_sync]++; rl->starved[is_sync] = 0; @@ -935,7 +939,7 @@ static struct request *get_request(struct request_queue *q, int rw_flags, */ if (blk_rq_should_init_elevator(bio) && !blk_queue_bypass(q)) { rw_flags |= REQ_ELVPRIV; - rl->elvpriv++; + q->nr_rqs_elvpriv++; if (et->icq_cache && ioc) icq = ioc_lookup_icq(ioc, q); } @@ -945,22 +949,19 @@ static struct request *get_request(struct request_queue *q, int rw_flags, spin_unlock_irq(q->queue_lock); /* allocate and init request */ - rq = mempool_alloc(q->rq.rq_pool, gfp_mask); + rq = mempool_alloc(rl->rq_pool, gfp_mask); if (!rq) goto fail_alloc; blk_rq_init(q, rq); + blk_rq_set_rl(rq, rl); rq->cmd_flags = rw_flags | REQ_ALLOCED; /* init elvpriv */ if (rw_flags & REQ_ELVPRIV) { if (unlikely(et->icq_cache && !icq)) { - create_io_context(gfp_mask, q->node); - ioc = rq_ioc(bio); - if (!ioc) - goto fail_elvpriv; - - icq = ioc_create_icq(ioc, q, gfp_mask); + if (ioc) + icq = ioc_create_icq(ioc, q, gfp_mask); if (!icq) goto fail_elvpriv; } @@ -1000,7 +1001,7 @@ static struct request *get_request(struct request_queue *q, int rw_flags, rq->elv.icq = NULL; spin_lock_irq(q->queue_lock); - rl->elvpriv--; + q->nr_rqs_elvpriv--; spin_unlock_irq(q->queue_lock); goto out; @@ -1013,7 +1014,7 @@ static struct request *get_request(struct request_queue *q, int rw_flags, * queue, but this is pretty rare. */ spin_lock_irq(q->queue_lock); - freed_request(q, rw_flags); + freed_request(rl, rw_flags); /* * in the very unlikely event that allocation failed and no @@ -1029,56 +1030,58 @@ static struct request *get_request(struct request_queue *q, int rw_flags, } /** - * get_request_wait - get a free request with retry + * get_request - get a free request * @q: request_queue to allocate request from * @rw_flags: RW and SYNC flags * @bio: bio to allocate request for (can be %NULL) + * @gfp_mask: allocation mask * - * Get a free request from @q. This function keeps retrying under memory - * pressure and fails iff @q is dead. + * Get a free request from @q. If %__GFP_WAIT is set in @gfp_mask, this + * function keeps retrying under memory pressure and fails iff @q is dead. * * Must be callled with @q->queue_lock held and, * Returns %NULL on failure, with @q->queue_lock held. * Returns !%NULL on success, with @q->queue_lock *not held*. */ -static struct request *get_request_wait(struct request_queue *q, int rw_flags, - struct bio *bio) +static struct request *get_request(struct request_queue *q, int rw_flags, + struct bio *bio, gfp_t gfp_mask) { const bool is_sync = rw_is_sync(rw_flags) != 0; + DEFINE_WAIT(wait); + struct request_list *rl; struct request *rq; - rq = get_request(q, rw_flags, bio, GFP_NOIO); - while (!rq) { - DEFINE_WAIT(wait); - struct request_list *rl = &q->rq; - - if (unlikely(blk_queue_dead(q))) - return NULL; + rl = blk_get_rl(q, bio); /* transferred to @rq on success */ +retry: + rq = __get_request(rl, rw_flags, bio, gfp_mask); + if (rq) + return rq; - prepare_to_wait_exclusive(&rl->wait[is_sync], &wait, - TASK_UNINTERRUPTIBLE); + if (!(gfp_mask & __GFP_WAIT) || unlikely(blk_queue_dead(q))) { + blk_put_rl(rl); + return NULL; + } - trace_block_sleeprq(q, bio, rw_flags & 1); + /* wait on @rl and retry */ + prepare_to_wait_exclusive(&rl->wait[is_sync], &wait, + TASK_UNINTERRUPTIBLE); - spin_unlock_irq(q->queue_lock); - io_schedule(); + trace_block_sleeprq(q, bio, rw_flags & 1); - /* - * After sleeping, we become a "batching" process and - * will be able to allocate at least one request, and - * up to a big batch of them for a small period time. - * See ioc_batching, ioc_set_batching - */ - create_io_context(GFP_NOIO, q->node); - ioc_set_batching(q, current->io_context); + spin_unlock_irq(q->queue_lock); + io_schedule(); - spin_lock_irq(q->queue_lock); - finish_wait(&rl->wait[is_sync], &wait); + /* + * After sleeping, we become a "batching" process and will be able + * to allocate at least one request, and up to a big batch of them + * for a small period time. See ioc_batching, ioc_set_batching + */ + ioc_set_batching(q, current->io_context); - rq = get_request(q, rw_flags, bio, GFP_NOIO); - }; + spin_lock_irq(q->queue_lock); + finish_wait(&rl->wait[is_sync], &wait); - return rq; + goto retry; } struct request *blk_get_request(struct request_queue *q, int rw, gfp_t gfp_mask) @@ -1087,11 +1090,11 @@ struct request *blk_get_request(struct request_queue *q, int rw, gfp_t gfp_mask) BUG_ON(rw != READ && rw != WRITE); + /* create ioc upfront */ + create_io_context(gfp_mask, q->node); + spin_lock_irq(q->queue_lock); - if (gfp_mask & __GFP_WAIT) - rq = get_request_wait(q, rw, NULL); - else - rq = get_request(q, rw, NULL, gfp_mask); + rq = get_request(q, rw, NULL, gfp_mask); if (!rq) spin_unlock_irq(q->queue_lock); /* q->queue_lock is unlocked at this point */ @@ -1248,12 +1251,14 @@ void __blk_put_request(struct request_queue *q, struct request *req) */ if (req->cmd_flags & REQ_ALLOCED) { unsigned int flags = req->cmd_flags; + struct request_list *rl = blk_rq_rl(req); BUG_ON(!list_empty(&req->queuelist)); BUG_ON(!hlist_unhashed(&req->hash)); - blk_free_request(q, req); - freed_request(q, flags); + blk_free_request(rl, req); + freed_request(rl, flags); + blk_put_rl(rl); } } EXPORT_SYMBOL_GPL(__blk_put_request); @@ -1481,7 +1486,7 @@ void blk_queue_bio(struct request_queue *q, struct bio *bio) * Grab a free request. This is might sleep but can not fail. * Returns with the queue unlocked. */ - req = get_request_wait(q, rw_flags, bio); + req = get_request(q, rw_flags, bio, GFP_NOIO); if (unlikely(!req)) { bio_endio(bio, -ENODEV); /* @q is dead */ goto out_unlock; @@ -1702,6 +1707,14 @@ generic_make_request_checks(struct bio *bio) goto end_io; } + /* + * Various block parts want %current->io_context and lazy ioc + * allocation ends up trading a lot of pain for a small amount of + * memory. Just allocate it upfront. This may fail and block + * layer knows how to live with it. + */ + create_io_context(GFP_ATOMIC, q->node); + if (blk_throtl_bio(q, bio)) return false; /* throttled, will be resubmitted later */ @@ -2241,9 +2254,11 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes) error_type = "I/O"; break; } - printk(KERN_ERR "end_request: %s error, dev %s, sector %llu\n", - error_type, req->rq_disk ? req->rq_disk->disk_name : "?", - (unsigned long long)blk_rq_pos(req)); + printk_ratelimited(KERN_ERR "end_request: %s error, dev %s, sector %llu\n", + error_type, req->rq_disk ? + req->rq_disk->disk_name : "?", + (unsigned long long)blk_rq_pos(req)); + } blk_account_io_completion(req, nr_bytes); @@ -2896,23 +2911,47 @@ static void queue_unplugged(struct request_queue *q, unsigned int depth, } -static void flush_plug_callbacks(struct blk_plug *plug) +static void flush_plug_callbacks(struct blk_plug *plug, bool from_schedule) { LIST_HEAD(callbacks); - if (list_empty(&plug->cb_list)) - return; + while (!list_empty(&plug->cb_list)) { + list_splice_init(&plug->cb_list, &callbacks); - list_splice_init(&plug->cb_list, &callbacks); - - while (!list_empty(&callbacks)) { - struct blk_plug_cb *cb = list_first_entry(&callbacks, + while (!list_empty(&callbacks)) { + struct blk_plug_cb *cb = list_first_entry(&callbacks, struct blk_plug_cb, list); - list_del(&cb->list); - cb->callback(cb); + list_del(&cb->list); + cb->callback(cb, from_schedule); + } + } +} + +struct blk_plug_cb *blk_check_plugged(blk_plug_cb_fn unplug, void *data, + int size) +{ + struct blk_plug *plug = current->plug; + struct blk_plug_cb *cb; + + if (!plug) + return NULL; + + list_for_each_entry(cb, &plug->cb_list, list) + if (cb->callback == unplug && cb->data == data) + return cb; + + /* Not currently on the callback list */ + BUG_ON(size < sizeof(*cb)); + cb = kzalloc(size, GFP_ATOMIC); + if (cb) { + cb->data = data; + cb->callback = unplug; + list_add(&cb->list, &plug->cb_list); } + return cb; } +EXPORT_SYMBOL(blk_check_plugged); void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule) { @@ -2924,7 +2963,7 @@ void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule) BUG_ON(plug->magic != PLUG_MAGIC); - flush_plug_callbacks(plug); + flush_plug_callbacks(plug, from_schedule); if (list_empty(&plug->list)) return; diff --git a/block/blk-ioc.c b/block/blk-ioc.c index 893b8007c657e8bd0ca93d5ba61e9e7d02aa892b..fab4cdd3f7bbb8f5d8bda98c3a8771a1ac61bc46 100644 --- a/block/blk-ioc.c +++ b/block/blk-ioc.c @@ -244,6 +244,7 @@ int create_task_io_context(struct task_struct *task, gfp_t gfp_flags, int node) /* initialize */ atomic_long_set(&ioc->refcount, 1); + atomic_set(&ioc->nr_tasks, 1); atomic_set(&ioc->active_ref, 1); spin_lock_init(&ioc->lock); INIT_RADIX_TREE(&ioc->icq_tree, GFP_ATOMIC | __GFP_HIGH); diff --git a/block/blk-lib.c b/block/blk-lib.c index 2b461b496a788c11d00616efaf16df121e620160..19cc761cacb2a4b71fe9d4579226025324ffddf5 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -44,6 +44,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, struct request_queue *q = bdev_get_queue(bdev); int type = REQ_WRITE | REQ_DISCARD; unsigned int max_discard_sectors; + unsigned int granularity, alignment, mask; struct bio_batch bb; struct bio *bio; int ret = 0; @@ -54,18 +55,20 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, if (!blk_queue_discard(q)) return -EOPNOTSUPP; + /* Zero-sector (unknown) and one-sector granularities are the same. */ + granularity = max(q->limits.discard_granularity >> 9, 1U); + mask = granularity - 1; + alignment = (bdev_discard_alignment(bdev) >> 9) & mask; + /* * Ensure that max_discard_sectors is of the proper - * granularity + * granularity, so that requests stay aligned after a split. */ max_discard_sectors = min(q->limits.max_discard_sectors, UINT_MAX >> 9); + max_discard_sectors = round_down(max_discard_sectors, granularity); if (unlikely(!max_discard_sectors)) { /* Avoid infinite loop below. Being cautious never hurts. */ return -EOPNOTSUPP; - } else if (q->limits.discard_granularity) { - unsigned int disc_sects = q->limits.discard_granularity >> 9; - - max_discard_sectors &= ~(disc_sects - 1); } if (flags & BLKDEV_DISCARD_SECURE) { @@ -79,25 +82,37 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, bb.wait = &wait; while (nr_sects) { + unsigned int req_sects; + sector_t end_sect; + bio = bio_alloc(gfp_mask, 1); if (!bio) { ret = -ENOMEM; break; } + req_sects = min_t(sector_t, nr_sects, max_discard_sectors); + + /* + * If splitting a request, and the next starting sector would be + * misaligned, stop the discard at the previous aligned sector. + */ + end_sect = sector + req_sects; + if (req_sects < nr_sects && (end_sect & mask) != alignment) { + end_sect = + round_down(end_sect - alignment, granularity) + + alignment; + req_sects = end_sect - sector; + } + bio->bi_sector = sector; bio->bi_end_io = bio_batch_end_io; bio->bi_bdev = bdev; bio->bi_private = &bb; - if (nr_sects > max_discard_sectors) { - bio->bi_size = max_discard_sectors << 9; - nr_sects -= max_discard_sectors; - sector += max_discard_sectors; - } else { - bio->bi_size = nr_sects << 9; - nr_sects = 0; - } + bio->bi_size = req_sects << 9; + nr_sects -= req_sects; + sector = end_sect; atomic_inc(&bb.done); submit_bio(type, bio); diff --git a/block/blk-merge.c b/block/blk-merge.c index 160035f548823482968bcd58298fcf9c309e7d62..e76279e411622519eebb54d4802eb11b796788db 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -110,6 +110,49 @@ static int blk_phys_contig_segment(struct request_queue *q, struct bio *bio, return 0; } +static void +__blk_segment_map_sg(struct request_queue *q, struct bio_vec *bvec, + struct scatterlist *sglist, struct bio_vec **bvprv, + struct scatterlist **sg, int *nsegs, int *cluster) +{ + + int nbytes = bvec->bv_len; + + if (*bvprv && *cluster) { + if ((*sg)->length + nbytes > queue_max_segment_size(q)) + goto new_segment; + + if (!BIOVEC_PHYS_MERGEABLE(*bvprv, bvec)) + goto new_segment; + if (!BIOVEC_SEG_BOUNDARY(q, *bvprv, bvec)) + goto new_segment; + + (*sg)->length += nbytes; + } else { +new_segment: + if (!*sg) + *sg = sglist; + else { + /* + * If the driver previously mapped a shorter + * list, we could see a termination bit + * prematurely unless it fully inits the sg + * table on each mapping. We KNOW that there + * must be more entries here or the driver + * would be buggy, so force clear the + * termination bit to avoid doing a full + * sg_init_table() in drivers for each command. + */ + (*sg)->page_link &= ~0x02; + *sg = sg_next(*sg); + } + + sg_set_page(*sg, bvec->bv_page, nbytes, bvec->bv_offset); + (*nsegs)++; + } + *bvprv = bvec; +} + /* * map a request to scatterlist, return number of sg entries setup. Caller * must make sure sg can hold rq->nr_phys_segments entries @@ -131,41 +174,8 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq, bvprv = NULL; sg = NULL; rq_for_each_segment(bvec, rq, iter) { - int nbytes = bvec->bv_len; - - if (bvprv && cluster) { - if (sg->length + nbytes > queue_max_segment_size(q)) - goto new_segment; - - if (!BIOVEC_PHYS_MERGEABLE(bvprv, bvec)) - goto new_segment; - if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bvec)) - goto new_segment; - - sg->length += nbytes; - } else { -new_segment: - if (!sg) - sg = sglist; - else { - /* - * If the driver previously mapped a shorter - * list, we could see a termination bit - * prematurely unless it fully inits the sg - * table on each mapping. We KNOW that there - * must be more entries here or the driver - * would be buggy, so force clear the - * termination bit to avoid doing a full - * sg_init_table() in drivers for each command. - */ - sg->page_link &= ~0x02; - sg = sg_next(sg); - } - - sg_set_page(sg, bvec->bv_page, nbytes, bvec->bv_offset); - nsegs++; - } - bvprv = bvec; + __blk_segment_map_sg(q, bvec, sglist, &bvprv, &sg, + &nsegs, &cluster); } /* segments in rq */ @@ -199,6 +209,43 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq, } EXPORT_SYMBOL(blk_rq_map_sg); +/** + * blk_bio_map_sg - map a bio to a scatterlist + * @q: request_queue in question + * @bio: bio being mapped + * @sglist: scatterlist being mapped + * + * Note: + * Caller must make sure sg can hold bio->bi_phys_segments entries + * + * Will return the number of sg entries setup + */ +int blk_bio_map_sg(struct request_queue *q, struct bio *bio, + struct scatterlist *sglist) +{ + struct bio_vec *bvec, *bvprv; + struct scatterlist *sg; + int nsegs, cluster; + unsigned long i; + + nsegs = 0; + cluster = blk_queue_cluster(q); + + bvprv = NULL; + sg = NULL; + bio_for_each_segment(bvec, bio, i) { + __blk_segment_map_sg(q, bvec, sglist, &bvprv, &sg, + &nsegs, &cluster); + } /* segments in bio */ + + if (sg) + sg_mark_end(sg); + + BUG_ON(bio->bi_phys_segments && nsegs > bio->bi_phys_segments); + return nsegs; +} +EXPORT_SYMBOL(blk_bio_map_sg); + static inline int ll_new_hw_segment(struct request_queue *q, struct request *req, struct bio *bio) diff --git a/block/blk-settings.c b/block/blk-settings.c index d3234fc494adcd48ff1dd69c9feb117e93e333c0..565a6786032f59e40cee28bf4bde4ffb451cffa8 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -143,8 +143,7 @@ void blk_set_stacking_limits(struct queue_limits *lim) lim->discard_zeroes_data = 1; lim->max_segments = USHRT_MAX; lim->max_hw_sectors = UINT_MAX; - - lim->max_sectors = BLK_DEF_MAX_SECTORS; + lim->max_sectors = UINT_MAX; } EXPORT_SYMBOL(blk_set_stacking_limits); diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index aa41b47c22d2e89525a5bd3cfb9501e67634bff7..9628b291f96057a42cbf6a5492bd7480fe7e93da 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -40,7 +40,7 @@ static ssize_t queue_requests_show(struct request_queue *q, char *page) static ssize_t queue_requests_store(struct request_queue *q, const char *page, size_t count) { - struct request_list *rl = &q->rq; + struct request_list *rl; unsigned long nr; int ret; @@ -55,6 +55,9 @@ queue_requests_store(struct request_queue *q, const char *page, size_t count) q->nr_requests = nr; blk_queue_congestion_threshold(q); + /* congestion isn't cgroup aware and follows root blkcg for now */ + rl = &q->root_rl; + if (rl->count[BLK_RW_SYNC] >= queue_congestion_on_threshold(q)) blk_set_queue_congested(q, BLK_RW_SYNC); else if (rl->count[BLK_RW_SYNC] < queue_congestion_off_threshold(q)) @@ -65,19 +68,22 @@ queue_requests_store(struct request_queue *q, const char *page, size_t count) else if (rl->count[BLK_RW_ASYNC] < queue_congestion_off_threshold(q)) blk_clear_queue_congested(q, BLK_RW_ASYNC); - if (rl->count[BLK_RW_SYNC] >= q->nr_requests) { - blk_set_queue_full(q, BLK_RW_SYNC); - } else { - blk_clear_queue_full(q, BLK_RW_SYNC); - wake_up(&rl->wait[BLK_RW_SYNC]); + blk_queue_for_each_rl(rl, q) { + if (rl->count[BLK_RW_SYNC] >= q->nr_requests) { + blk_set_rl_full(rl, BLK_RW_SYNC); + } else { + blk_clear_rl_full(rl, BLK_RW_SYNC); + wake_up(&rl->wait[BLK_RW_SYNC]); + } + + if (rl->count[BLK_RW_ASYNC] >= q->nr_requests) { + blk_set_rl_full(rl, BLK_RW_ASYNC); + } else { + blk_clear_rl_full(rl, BLK_RW_ASYNC); + wake_up(&rl->wait[BLK_RW_ASYNC]); + } } - if (rl->count[BLK_RW_ASYNC] >= q->nr_requests) { - blk_set_queue_full(q, BLK_RW_ASYNC); - } else { - blk_clear_queue_full(q, BLK_RW_ASYNC); - wake_up(&rl->wait[BLK_RW_ASYNC]); - } spin_unlock_irq(q->queue_lock); return ret; } @@ -476,7 +482,6 @@ static void blk_release_queue(struct kobject *kobj) { struct request_queue *q = container_of(kobj, struct request_queue, kobj); - struct request_list *rl = &q->rq; blk_sync_queue(q); @@ -489,8 +494,7 @@ static void blk_release_queue(struct kobject *kobj) elevator_exit(q->elevator); } - if (rl->rq_pool) - mempool_destroy(rl->rq_pool); + blk_exit_rl(&q->root_rl); if (q->queue_tags) __blk_queue_free_tags(q); diff --git a/block/blk-throttle.c b/block/blk-throttle.c index 5b0659512047208efdcc3db7d714bc72dfd456f5..e287c19908c8a31d3c4d29b1586921066032afa6 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -1123,9 +1123,6 @@ bool blk_throtl_bio(struct request_queue *q, struct bio *bio) goto out; } - /* bio_associate_current() needs ioc, try creating */ - create_io_context(GFP_ATOMIC, q->node); - /* * A throtl_grp pointer retrieved under rcu can be used to access * basic fields like stats and io rates. If a group has no rules, diff --git a/block/blk.h b/block/blk.h index 85f6ae42f7d3f698e9e82c75064f428065953e70..2a0ea32d249fdaa9694e0249e435777565535d70 100644 --- a/block/blk.h +++ b/block/blk.h @@ -18,6 +18,9 @@ static inline void __blk_get_queue(struct request_queue *q) kobject_get(&q->kobj); } +int blk_init_rl(struct request_list *rl, struct request_queue *q, + gfp_t gfp_mask); +void blk_exit_rl(struct request_list *rl); void init_request_from_bio(struct request *req, struct bio *bio); void blk_rq_bio_prep(struct request_queue *q, struct request *rq, struct bio *bio); @@ -33,7 +36,6 @@ bool __blk_end_bidi_request(struct request *rq, int error, void blk_rq_timed_out_timer(unsigned long data); void blk_delete_timer(struct request *); void blk_add_timer(struct request *); -void __generic_unplug_device(struct request_queue *); /* * Internal atomic flags for request handling diff --git a/block/bsg-lib.c b/block/bsg-lib.c index 7ad49c88f6b197a04c66e05aab9facacd2781af4..deee61fbb7419005886234b47a68b73b5833d20e 100644 --- a/block/bsg-lib.c +++ b/block/bsg-lib.c @@ -243,56 +243,3 @@ int bsg_setup_queue(struct device *dev, struct request_queue *q, return 0; } EXPORT_SYMBOL_GPL(bsg_setup_queue); - -/** - * bsg_remove_queue - Deletes the bsg dev from the q - * @q: the request_queue that is to be torn down. - * - * Notes: - * Before unregistering the queue empty any requests that are blocked - */ -void bsg_remove_queue(struct request_queue *q) -{ - struct request *req; /* block request */ - int counts; /* totals for request_list count and starved */ - - if (!q) - return; - - /* Stop taking in new requests */ - spin_lock_irq(q->queue_lock); - blk_stop_queue(q); - - /* drain all requests in the queue */ - while (1) { - /* need the lock to fetch a request - * this may fetch the same reqeust as the previous pass - */ - req = blk_fetch_request(q); - /* save requests in use and starved */ - counts = q->rq.count[0] + q->rq.count[1] + - q->rq.starved[0] + q->rq.starved[1]; - spin_unlock_irq(q->queue_lock); - /* any requests still outstanding? */ - if (counts == 0) - break; - - /* This may be the same req as the previous iteration, - * always send the blk_end_request_all after a prefetch. - * It is not okay to not end the request because the - * prefetch started the request. - */ - if (req) { - /* return -ENXIO to indicate that this queue is - * going away - */ - req->errors = -ENXIO; - blk_end_request_all(req, -ENXIO); - } - - msleep(200); /* allow bsg to possibly finish */ - spin_lock_irq(q->queue_lock); - } - bsg_unregister_queue(q); -} -EXPORT_SYMBOL_GPL(bsg_remove_queue); diff --git a/block/genhd.c b/block/genhd.c index 9cf5583c90ffa75c2b010020fb22fc8ddf55e82a..d839723303c856ae221bdf54ec1de93544698d95 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -154,7 +154,7 @@ struct hd_struct *disk_part_iter_next(struct disk_part_iter *piter) part = rcu_dereference(ptbl->part[piter->idx]); if (!part) continue; - if (!part->nr_sects && + if (!part_nr_sects_read(part) && !(piter->flags & DISK_PITER_INCL_EMPTY) && !(piter->flags & DISK_PITER_INCL_EMPTY_PART0 && piter->idx == 0)) @@ -191,7 +191,7 @@ EXPORT_SYMBOL_GPL(disk_part_iter_exit); static inline int sector_in_part(struct hd_struct *part, sector_t sector) { return part->start_sect <= sector && - sector < part->start_sect + part->nr_sects; + sector < part->start_sect + part_nr_sects_read(part); } /** @@ -769,8 +769,8 @@ void __init printk_all_partitions(void) printk("%s%s %10llu %s %s", is_part0 ? "" : " ", bdevt_str(part_devt(part), devt_buf), - (unsigned long long)part->nr_sects >> 1, - disk_name(disk, part->partno, name_buf), + (unsigned long long)part_nr_sects_read(part) >> 1 + , disk_name(disk, part->partno, name_buf), uuid_buf); if (is_part0) { if (disk->driverfs_dev != NULL && @@ -835,7 +835,7 @@ static void disk_seqf_stop(struct seq_file *seqf, void *v) static void *show_partition_start(struct seq_file *seqf, loff_t *pos) { - static void *p; + void *p; p = disk_seqf_start(seqf, pos); if (!IS_ERR_OR_NULL(p) && !*pos) @@ -862,7 +862,7 @@ static int show_partition(struct seq_file *seqf, void *v) while ((part = disk_part_iter_next(&piter))) seq_printf(seqf, "%4d %7d %10llu %s\n", MAJOR(part_devt(part)), MINOR(part_devt(part)), - (unsigned long long)part->nr_sects >> 1, + (unsigned long long)part_nr_sects_read(part) >> 1, disk_name(sgp, part->partno, buf)); disk_part_iter_exit(&piter); @@ -1268,6 +1268,16 @@ struct gendisk *alloc_disk_node(int minors, int node_id) } disk->part_tbl->part[0] = &disk->part0; + /* + * set_capacity() and get_capacity() currently don't use + * seqcounter to read/update the part0->nr_sects. Still init + * the counter as we can read the sectors in IO submission + * patch using seqence counters. + * + * TODO: Ideally set_capacity() and get_capacity() should be + * converted to make use of bd_mutex and sequence counters. + */ + seqcount_init(&disk->part0.nr_sects_seq); hd_ref_init(&disk->part0); disk->minors = minors; diff --git a/block/ioctl.c b/block/ioctl.c index ba15b2dbfb98ea55911109543f35889ea7b615da..4a85096f5410adde92d01cd58ecba30373c808f1 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -13,7 +13,7 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user { struct block_device *bdevp; struct gendisk *disk; - struct hd_struct *part; + struct hd_struct *part, *lpart; struct blkpg_ioctl_arg a; struct blkpg_partition p; struct disk_part_iter piter; @@ -36,12 +36,12 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user case BLKPG_ADD_PARTITION: start = p.start >> 9; length = p.length >> 9; - /* check for fit in a hd_struct */ - if (sizeof(sector_t) == sizeof(long) && + /* check for fit in a hd_struct */ + if (sizeof(sector_t) == sizeof(long) && sizeof(long long) > sizeof(long)) { long pstart = start, plength = length; if (pstart != start || plength != length - || pstart < 0 || plength < 0) + || pstart < 0 || plength < 0 || partno > 65535) return -EINVAL; } @@ -91,6 +91,59 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user mutex_unlock(&bdevp->bd_mutex); bdput(bdevp); + return 0; + case BLKPG_RESIZE_PARTITION: + start = p.start >> 9; + /* new length of partition in bytes */ + length = p.length >> 9; + /* check for fit in a hd_struct */ + if (sizeof(sector_t) == sizeof(long) && + sizeof(long long) > sizeof(long)) { + long pstart = start, plength = length; + if (pstart != start || plength != length + || pstart < 0 || plength < 0) + return -EINVAL; + } + part = disk_get_part(disk, partno); + if (!part) + return -ENXIO; + bdevp = bdget(part_devt(part)); + if (!bdevp) { + disk_put_part(part); + return -ENOMEM; + } + mutex_lock(&bdevp->bd_mutex); + mutex_lock_nested(&bdev->bd_mutex, 1); + if (start != part->start_sect) { + mutex_unlock(&bdevp->bd_mutex); + mutex_unlock(&bdev->bd_mutex); + bdput(bdevp); + disk_put_part(part); + return -EINVAL; + } + /* overlap? */ + disk_part_iter_init(&piter, disk, + DISK_PITER_INCL_EMPTY); + while ((lpart = disk_part_iter_next(&piter))) { + if (lpart->partno != partno && + !(start + length <= lpart->start_sect || + start >= lpart->start_sect + lpart->nr_sects) + ) { + disk_part_iter_exit(&piter); + mutex_unlock(&bdevp->bd_mutex); + mutex_unlock(&bdev->bd_mutex); + bdput(bdevp); + disk_put_part(part); + return -EBUSY; + } + } + disk_part_iter_exit(&piter); + part_nr_sects_write(part, (sector_t)length); + i_size_write(bdevp->bd_inode, p.length); + mutex_unlock(&bdevp->bd_mutex); + mutex_unlock(&bdev->bd_mutex); + bdput(bdevp); + disk_put_part(part); return 0; default: return -EINVAL; diff --git a/block/partition-generic.c b/block/partition-generic.c index 6df5d6928a440c53b44f158ea99b98d7d9a48660..f1d14519cc040424e79fe0f35f446e4d4e7a123d 100644 --- a/block/partition-generic.c +++ b/block/partition-generic.c @@ -84,7 +84,7 @@ ssize_t part_size_show(struct device *dev, struct device_attribute *attr, char *buf) { struct hd_struct *p = dev_to_part(dev); - return sprintf(buf, "%llu\n",(unsigned long long)p->nr_sects); + return sprintf(buf, "%llu\n",(unsigned long long)part_nr_sects_read(p)); } static ssize_t part_ro_show(struct device *dev, @@ -294,6 +294,8 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno, err = -ENOMEM; goto out_free; } + + seqcount_init(&p->nr_sects_seq); pdev = part_to_dev(p); p->start_sect = start; diff --git a/crypto/authenc.c b/crypto/authenc.c index 5ef7ba6b6a76a3251956329ffd9ebcfe85ce66b9..d0583a4489e60ee59a6cc0950d7342594a4d5780 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -336,7 +336,7 @@ static int crypto_authenc_genicv(struct aead_request *req, u8 *iv, cryptlen += ivsize; } - if (sg_is_last(assoc)) { + if (req->assoclen && sg_is_last(assoc)) { authenc_ahash_fn = crypto_authenc_ahash; sg_init_table(asg, 2); sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset); @@ -490,7 +490,7 @@ static int crypto_authenc_iverify(struct aead_request *req, u8 *iv, cryptlen += ivsize; } - if (sg_is_last(assoc)) { + if (req->assoclen && sg_is_last(assoc)) { authenc_ahash_fn = crypto_authenc_ahash; sg_init_table(asg, 2); sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset); diff --git a/drivers/Kconfig b/drivers/Kconfig index 805c432c94393753557de06d61a007c15c2b7844..ece958d3762e4a0701189ee9be23b1876a6740c7 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -112,6 +112,8 @@ source "drivers/auxdisplay/Kconfig" source "drivers/uio/Kconfig" +source "drivers/vfio/Kconfig" + source "drivers/vlynq/Kconfig" source "drivers/virtio/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index bd36f09f22467cabbc615a6e9bb6ede08c4a0528..5b421840c48d28284978b6a8d6aa94eb15097c08 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_FUSION) += message/ obj-y += firewire/ obj-$(CONFIG_UIO) += uio/ +obj-$(CONFIG_VFIO) += vfio/ obj-y += cdrom/ obj-y += auxdisplay/ obj-$(CONFIG_PCCARD) += pcmcia/ diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index ac7034129f3f9e656d6cbf537dc063a2e49ba614..d5fdd36190cce3f385011b30a1f5c729a5b6a4dd 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -69,7 +69,9 @@ static const struct acpi_device_id ac_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, ac_device_ids); +#ifdef CONFIG_PM_SLEEP static int acpi_ac_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(acpi_ac_pm, NULL, acpi_ac_resume); static struct acpi_driver acpi_ac_driver = { @@ -313,6 +315,7 @@ static int acpi_ac_add(struct acpi_device *device) return result; } +#ifdef CONFIG_PM_SLEEP static int acpi_ac_resume(struct device *dev) { struct acpi_ac *ac; @@ -332,6 +335,7 @@ static int acpi_ac_resume(struct device *dev) kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); return 0; } +#endif static int acpi_ac_remove(struct acpi_device *device, int type) { diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 5ccb99ae3a6fae1872a13ab40755aa4ecd693106..5de4ec72766d653924068cb6887d07573ef93539 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -83,22 +83,22 @@ acpi_status acpi_hw_clear_acpi_status(void); /* * hwsleep - sleep/wake support (Legacy sleep registers) */ -acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags); +acpi_status acpi_hw_legacy_sleep(u8 sleep_state); -acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags); +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state); -acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags); +acpi_status acpi_hw_legacy_wake(u8 sleep_state); /* * hwesleep - sleep/wake support (Extended FADT-V5 sleep registers) */ void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument); -acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags); +acpi_status acpi_hw_extended_sleep(u8 sleep_state); -acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags); +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state); -acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags); +acpi_status acpi_hw_extended_wake(u8 sleep_state); /* * hwvalid - Port I/O with validation diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c index 48518dac534230a8f59ee7bbfe1e36475396bb19..94996f9ae3ad164636364af38d6ce0b2524cdd72 100644 --- a/drivers/acpi/acpica/hwesleep.c +++ b/drivers/acpi/acpica/hwesleep.c @@ -90,7 +90,6 @@ void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) * FUNCTION: acpi_hw_extended_sleep * * PARAMETERS: sleep_state - Which sleep state to enter - * flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * @@ -100,7 +99,7 @@ void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) * ******************************************************************************/ -acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) +acpi_status acpi_hw_extended_sleep(u8 sleep_state) { acpi_status status; u8 sleep_type_value; @@ -125,12 +124,6 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) acpi_gbl_system_awake_and_running = FALSE; - /* Optionally execute _GTS (Going To Sleep) */ - - if (flags & ACPI_EXECUTE_GTS) { - acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); - } - /* Flush caches, as per ACPI specification */ ACPI_FLUSH_CPU_CACHE(); @@ -172,7 +165,6 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) * FUNCTION: acpi_hw_extended_wake_prep * * PARAMETERS: sleep_state - Which sleep state we just exited - * flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * @@ -181,7 +173,7 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) * ******************************************************************************/ -acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags) +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state) { acpi_status status; u8 sleep_type_value; @@ -200,11 +192,6 @@ acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags) &acpi_gbl_FADT.sleep_control); } - /* Optionally execute _BFS (Back From Sleep) */ - - if (flags & ACPI_EXECUTE_BFS) { - acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); - } return_ACPI_STATUS(AE_OK); } @@ -222,7 +209,7 @@ acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags) * ******************************************************************************/ -acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags) +acpi_status acpi_hw_extended_wake(u8 sleep_state) { ACPI_FUNCTION_TRACE(hw_extended_wake); diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index 9960fe9ef5334f719ed4e5cbd8cb2cbef530a2aa..3fddde056a5e1774e2e208f2478ce07d53fa5bf5 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -56,7 +56,6 @@ ACPI_MODULE_NAME("hwsleep") * FUNCTION: acpi_hw_legacy_sleep * * PARAMETERS: sleep_state - Which sleep state to enter - * flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * @@ -64,7 +63,7 @@ ACPI_MODULE_NAME("hwsleep") * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED * ******************************************************************************/ -acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) +acpi_status acpi_hw_legacy_sleep(u8 sleep_state) { struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; @@ -110,12 +109,6 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) return_ACPI_STATUS(status); } - /* Optionally execute _GTS (Going To Sleep) */ - - if (flags & ACPI_EXECUTE_GTS) { - acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); - } - /* Get current value of PM1A control */ status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, @@ -214,7 +207,6 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) * FUNCTION: acpi_hw_legacy_wake_prep * * PARAMETERS: sleep_state - Which sleep state we just exited - * flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * @@ -224,7 +216,7 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) * ******************************************************************************/ -acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state) { acpi_status status; struct acpi_bit_register_info *sleep_type_reg_info; @@ -275,11 +267,6 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) } } - /* Optionally execute _BFS (Back From Sleep) */ - - if (flags & ACPI_EXECUTE_BFS) { - acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); - } return_ACPI_STATUS(status); } @@ -288,7 +275,6 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) * FUNCTION: acpi_hw_legacy_wake * * PARAMETERS: sleep_state - Which sleep state we just exited - * flags - Reserved, set to zero * * RETURN: Status * @@ -297,7 +283,7 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) * ******************************************************************************/ -acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags) +acpi_status acpi_hw_legacy_wake(u8 sleep_state) { acpi_status status; diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c index f8684bfe79079ba170c727b96d7ea404a91ee604..1f165a750ae28736ca5066c908d5ade37ba4740e 100644 --- a/drivers/acpi/acpica/hwxfsleep.c +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -50,7 +50,7 @@ ACPI_MODULE_NAME("hwxfsleep") /* Local prototypes */ static acpi_status -acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id); +acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id); /* * Dispatch table used to efficiently branch to the various sleep @@ -235,7 +235,7 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) * ******************************************************************************/ static acpi_status -acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id) +acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id) { acpi_status status; struct acpi_sleep_functions *sleep_functions = @@ -248,11 +248,11 @@ acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id) * use the extended sleep registers */ if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { - status = sleep_functions->extended_function(sleep_state, flags); + status = sleep_functions->extended_function(sleep_state); } else { /* Legacy sleep */ - status = sleep_functions->legacy_function(sleep_state, flags); + status = sleep_functions->legacy_function(sleep_state); } return (status); @@ -262,7 +262,7 @@ acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id) * For the case where reduced-hardware-only code is being generated, * we know that only the extended sleep registers are available */ - status = sleep_functions->extended_function(sleep_state, flags); + status = sleep_functions->extended_function(sleep_state); return (status); #endif /* !ACPI_REDUCED_HARDWARE */ @@ -349,7 +349,6 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) * FUNCTION: acpi_enter_sleep_state * * PARAMETERS: sleep_state - Which sleep state to enter - * flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * @@ -357,7 +356,7 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED * ******************************************************************************/ -acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags) +acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) { acpi_status status; @@ -371,7 +370,7 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags) } status = - acpi_hw_sleep_dispatch(sleep_state, flags, ACPI_SLEEP_FUNCTION_ID); + acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID); return_ACPI_STATUS(status); } @@ -391,14 +390,14 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) * Called with interrupts DISABLED. * ******************************************************************************/ -acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags) +acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) { acpi_status status; ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); status = - acpi_hw_sleep_dispatch(sleep_state, flags, + acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_PREP_FUNCTION_ID); return_ACPI_STATUS(status); } @@ -423,8 +422,7 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state) ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); - - status = acpi_hw_sleep_dispatch(sleep_state, 0, ACPI_WAKE_FUNCTION_ID); + status = acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_FUNCTION_ID); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c index ea4c6d52605a2af79f141efab1f2615c87b0cab1..29e51bc013838c5d33cf1df0089331ae3380951b 100644 --- a/drivers/acpi/acpica/tbxface.c +++ b/drivers/acpi/acpica/tbxface.c @@ -387,6 +387,7 @@ acpi_get_table_with_size(char *signature, return (AE_NOT_FOUND); } +ACPI_EXPORT_SYMBOL(acpi_get_table_with_size) acpi_status acpi_get_table(char *signature, diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index ff2c876ec412980a8f9a73188f925c964ecae0ad..45e3e1759fb88c09ddd401921d2a4ea035431bff 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -1052,6 +1052,7 @@ static int acpi_battery_remove(struct acpi_device *device, int type) return 0; } +#ifdef CONFIG_PM_SLEEP /* this is needed to learn about changes made in suspended state */ static int acpi_battery_resume(struct device *dev) { @@ -1068,6 +1069,7 @@ static int acpi_battery_resume(struct device *dev) acpi_battery_update(battery); return 0; } +#endif static SIMPLE_DEV_PM_OPS(acpi_battery_pm, NULL, acpi_battery_resume); diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 9628652e080c590fb3f6e01dedc655584c12737b..e0596954290b8e33e20791effc0227b80fb4a0c9 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -237,6 +237,16 @@ static int __acpi_bus_get_power(struct acpi_device *device, int *state) } else if (result == ACPI_STATE_D3_HOT) { result = ACPI_STATE_D3; } + + /* + * If we were unsure about the device parent's power state up to this + * point, the fact that the device is in D0 implies that the parent has + * to be in D0 too. + */ + if (device->parent && device->parent->power.state == ACPI_STATE_UNKNOWN + && result == ACPI_STATE_D0) + device->parent->power.state = ACPI_STATE_D0; + *state = result; out: diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 79d4c22f7a6d82c21e786b591f02f8bfe28b0f43..314a3b84bbc7e2626a227a4ef2a620204dbf2434 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -78,7 +78,9 @@ static int acpi_button_add(struct acpi_device *device); static int acpi_button_remove(struct acpi_device *device, int type); static void acpi_button_notify(struct acpi_device *device, u32 event); +#ifdef CONFIG_PM_SLEEP static int acpi_button_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(acpi_button_pm, NULL, acpi_button_resume); static struct acpi_driver acpi_button_driver = { @@ -310,6 +312,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) } } +#ifdef CONFIG_PM_SLEEP static int acpi_button_resume(struct device *dev) { struct acpi_device *device = to_acpi_device(dev); @@ -319,6 +322,7 @@ static int acpi_button_resume(struct device *dev) return acpi_lid_send_state(device); return 0; } +#endif static int acpi_button_add(struct acpi_device *device) { diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 669d9ee80d1678b7665a3b4b8b2ad709743a44aa..bc36a476f1abf139586391c4e490cad56aff4368 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -53,8 +53,10 @@ static const struct acpi_device_id fan_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, fan_device_ids); +#ifdef CONFIG_PM_SLEEP static int acpi_fan_suspend(struct device *dev); static int acpi_fan_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(acpi_fan_pm, acpi_fan_suspend, acpi_fan_resume); static struct acpi_driver acpi_fan_driver = { @@ -184,6 +186,7 @@ static int acpi_fan_remove(struct acpi_device *device, int type) return 0; } +#ifdef CONFIG_PM_SLEEP static int acpi_fan_suspend(struct device *dev) { if (!dev) @@ -207,6 +210,7 @@ static int acpi_fan_resume(struct device *dev) return result; } +#endif static int __init acpi_fan_init(void) { diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index e56f3be7b07d36fceb32dce25ede0fa35308f0e7..cb31298ca684f5d99578ada635eb2b011bd07b67 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -237,6 +237,8 @@ acpi_parse_processor_affinity(struct acpi_subtable_header *header, return 0; } +static int __initdata parsed_numa_memblks; + static int __init acpi_parse_memory_affinity(struct acpi_subtable_header * header, const unsigned long end) @@ -250,8 +252,8 @@ acpi_parse_memory_affinity(struct acpi_subtable_header * header, acpi_table_print_srat_entry(header); /* let architecture-dependent part to do it */ - acpi_numa_memory_affinity_init(memory_affinity); - + if (!acpi_numa_memory_affinity_init(memory_affinity)) + parsed_numa_memblks++; return 0; } @@ -304,8 +306,10 @@ int __init acpi_numa_init(void) acpi_numa_arch_fixup(); - if (cnt <= 0) - return cnt ?: -ENOENT; + if (cnt < 0) + return cnt; + else if (!parsed_numa_memblks) + return -ENOENT; return 0; } diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index ec54014c321c5ffd72cf46cc14d877ecbdec1925..72a2c98bc4298e8518e7d2b388f0e2d5d3abdc5f 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -573,8 +573,15 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) OSC_CLOCK_PWR_CAPABILITY_SUPPORT; if (pci_msi_enabled()) flags |= OSC_MSI_SUPPORT; - if (flags != base_flags) - acpi_pci_osc_support(root, flags); + if (flags != base_flags) { + status = acpi_pci_osc_support(root, flags); + if (ACPI_FAILURE(status)) { + dev_info(root->bus->bridge, "ACPI _OSC support " + "notification failed, disabling PCIe ASPM\n"); + pcie_no_aspm(); + flags = base_flags; + } + } if (!pcie_ports_disabled && (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) { diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 215ecd09740888be80ce50bbd4ffb74f292c9753..40e38a06ba854fc04751ec2386ca334d01998eb8 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -67,7 +67,9 @@ static const struct acpi_device_id power_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, power_device_ids); +#ifdef CONFIG_PM_SLEEP static int acpi_power_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(acpi_power_pm, NULL, acpi_power_resume); static struct acpi_driver acpi_power_driver = { @@ -105,6 +107,7 @@ struct acpi_power_resource { /* List of devices relying on this power resource */ struct acpi_power_resource_device *devices; + struct mutex devices_lock; }; static struct list_head acpi_power_resource_list; @@ -223,7 +226,6 @@ static void acpi_power_on_device(struct acpi_power_managed_device *device) static int __acpi_power_on(struct acpi_power_resource *resource) { - struct acpi_power_resource_device *device_list = resource->devices; acpi_status status = AE_OK; status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL); @@ -236,19 +238,15 @@ static int __acpi_power_on(struct acpi_power_resource *resource) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n", resource->name)); - while (device_list) { - acpi_power_on_device(device_list->device); - - device_list = device_list->next; - } - return 0; } static int acpi_power_on(acpi_handle handle) { int result = 0; + bool resume_device = false; struct acpi_power_resource *resource = NULL; + struct acpi_power_resource_device *device_list; result = acpi_power_get_context(handle, &resource); if (result) @@ -264,10 +262,25 @@ static int acpi_power_on(acpi_handle handle) result = __acpi_power_on(resource); if (result) resource->ref_count--; + else + resume_device = true; } mutex_unlock(&resource->resource_lock); + if (!resume_device) + return result; + + mutex_lock(&resource->devices_lock); + + device_list = resource->devices; + while (device_list) { + acpi_power_on_device(device_list->device); + device_list = device_list->next; + } + + mutex_unlock(&resource->devices_lock); + return result; } @@ -353,7 +366,7 @@ static void __acpi_power_resource_unregister_device(struct device *dev, if (acpi_power_get_context(res_handle, &resource)) return; - mutex_lock(&resource->resource_lock); + mutex_lock(&resource->devices_lock); prev = NULL; curr = resource->devices; while (curr) { @@ -370,7 +383,7 @@ static void __acpi_power_resource_unregister_device(struct device *dev, prev = curr; curr = curr->next; } - mutex_unlock(&resource->resource_lock); + mutex_unlock(&resource->devices_lock); } /* Unlink dev from all power resources in _PR0 */ @@ -412,10 +425,10 @@ static int __acpi_power_resource_register_device( power_resource_device->device = powered_device; - mutex_lock(&resource->resource_lock); + mutex_lock(&resource->devices_lock); power_resource_device->next = resource->devices; resource->devices = power_resource_device; - mutex_unlock(&resource->resource_lock); + mutex_unlock(&resource->devices_lock); return 0; } @@ -460,7 +473,7 @@ int acpi_power_resource_register_device(struct device *dev, acpi_handle handle) return ret; no_power_resource: - printk(KERN_WARNING PREFIX "Invalid Power Resource to register!"); + printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!"); return -ENODEV; } EXPORT_SYMBOL_GPL(acpi_power_resource_register_device); @@ -719,6 +732,7 @@ static int acpi_power_add(struct acpi_device *device) resource->device = device; mutex_init(&resource->resource_lock); + mutex_init(&resource->devices_lock); strcpy(resource->name, device->pnp.bus_id); strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME); strcpy(acpi_device_class(device), ACPI_POWER_CLASS); @@ -775,6 +789,7 @@ static int acpi_power_remove(struct acpi_device *device, int type) return 0; } +#ifdef CONFIG_PM_SLEEP static int acpi_power_resume(struct device *dev) { int result = 0, state; @@ -803,6 +818,7 @@ static int acpi_power_resume(struct device *dev) return result; } +#endif int __init acpi_power_init(void) { diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index ff8e04f2fab40eb7ea14693a2ba70babe1ec8797..bfc31cb0dd3eac96292af65535c2ee4554cdbf10 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -437,7 +437,7 @@ static int acpi_cpu_soft_notify(struct notifier_block *nfb, /* Normal CPU soft online event */ } else { acpi_processor_ppc_has_changed(pr, 0); - acpi_processor_cst_has_changed(pr); + acpi_processor_hotplug(pr); acpi_processor_reevaluate_tstate(pr, action); acpi_processor_tstate_has_changed(pr); } diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index c0b9aa5faf4cdfd8d354fa89e8204704714cccf1..ff0740e0a9c248fc932992e56d23540a59489a55 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -988,6 +988,7 @@ static void acpi_sbs_rmdirs(void) #endif } +#ifdef CONFIG_PM_SLEEP static int acpi_sbs_resume(struct device *dev) { struct acpi_sbs *sbs; @@ -997,6 +998,7 @@ static int acpi_sbs_resume(struct device *dev) acpi_sbs_callback(sbs); return 0; } +#endif static SIMPLE_DEV_PM_OPS(acpi_sbs_pm, NULL, acpi_sbs_resume); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 7a7a9c929247e6faaecbeca3c9863f02abc1c283..fdcdbb652915a32340d91a7d6e6fcce15c3ee602 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -28,36 +28,7 @@ #include "internal.h" #include "sleep.h" -u8 wake_sleep_flags = ACPI_NO_OPTIONAL_METHODS; -static unsigned int gts, bfs; -static int set_param_wake_flag(const char *val, struct kernel_param *kp) -{ - int ret = param_set_int(val, kp); - - if (ret) - return ret; - - if (kp->arg == (const char *)>s) { - if (gts) - wake_sleep_flags |= ACPI_EXECUTE_GTS; - else - wake_sleep_flags &= ~ACPI_EXECUTE_GTS; - } - if (kp->arg == (const char *)&bfs) { - if (bfs) - wake_sleep_flags |= ACPI_EXECUTE_BFS; - else - wake_sleep_flags &= ~ACPI_EXECUTE_BFS; - } - return ret; -} -module_param_call(gts, set_param_wake_flag, param_get_int, >s, 0644); -module_param_call(bfs, set_param_wake_flag, param_get_int, &bfs, 0644); -MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); -MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); - static u8 sleep_states[ACPI_S_STATE_COUNT]; -static bool pwr_btn_event_pending; static void acpi_sleep_tts_switch(u32 acpi_state) { @@ -110,6 +81,7 @@ static int acpi_sleep_prepare(u32 acpi_state) #ifdef CONFIG_ACPI_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; +static bool pwr_btn_event_pending; /* * The ACPI specification wants us to save NVS memory regions during hibernation @@ -305,7 +277,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) switch (acpi_state) { case ACPI_STATE_S1: barrier(); - status = acpi_enter_sleep_state(acpi_state, wake_sleep_flags); + status = acpi_enter_sleep_state(acpi_state); break; case ACPI_STATE_S3: @@ -319,8 +291,8 @@ static int acpi_suspend_enter(suspend_state_t pm_state) /* This violates the spec but is required for bug compatibility. */ acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state, wake_sleep_flags); + /* Reprogram control registers */ + acpi_leave_sleep_state_prep(acpi_state); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the @@ -603,9 +575,9 @@ static int acpi_hibernation_enter(void) ACPI_FLUSH_CPU_CACHE(); /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4, wake_sleep_flags); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags); + status = acpi_enter_sleep_state(ACPI_STATE_S4); + /* Reprogram control registers */ + acpi_leave_sleep_state_prep(ACPI_STATE_S4); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } @@ -617,8 +589,8 @@ static void acpi_hibernation_leave(void) * enable it here. */ acpi_enable(); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags); + /* Reprogram control registers */ + acpi_leave_sleep_state_prep(ACPI_STATE_S4); /* Check the hardware signature */ if (facs && s4_hardware_signature != facs->hardware_signature) { printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " @@ -892,33 +864,7 @@ static void acpi_power_off(void) /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); - acpi_enter_sleep_state(ACPI_STATE_S5, wake_sleep_flags); -} - -/* - * ACPI 2.0 created the optional _GTS and _BFS, - * but industry adoption has been neither rapid nor broad. - * - * Linux gets into trouble when it executes poorly validated - * paths through the BIOS, so disable _GTS and _BFS by default, - * but do speak up and offer the option to enable them. - */ -static void __init acpi_gts_bfs_check(void) -{ - acpi_handle dummy; - - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__GTS, &dummy))) - { - printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n"); - printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, " - "please notify linux-acpi@vger.kernel.org\n"); - } - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__BFS, &dummy))) - { - printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n"); - printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, " - "please notify linux-acpi@vger.kernel.org\n"); - } + acpi_enter_sleep_state(ACPI_STATE_S5); } int __init acpi_sleep_init(void) @@ -979,6 +925,5 @@ int __init acpi_sleep_init(void) * object can also be evaluated when the system enters S5. */ register_reboot_notifier(&tts_notifier); - acpi_gts_bfs_check(); return 0; } diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 240a24400976929c663b9b3f8ce8bafa36435d5f..7c3f98ba4afefd00686fffc36283ad783a3e4798 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -173,7 +173,7 @@ static int param_set_trace_state(const char *val, struct kernel_param *kp) { int result = 0; - if (!strncmp(val, "enable", strlen("enable"))) { + if (!strncmp(val, "enable", sizeof("enable") - 1)) { result = acpi_debug_trace(trace_method_name, trace_debug_level, trace_debug_layer, 0); if (result) @@ -181,7 +181,7 @@ static int param_set_trace_state(const char *val, struct kernel_param *kp) goto exit; } - if (!strncmp(val, "disable", strlen("disable"))) { + if (!strncmp(val, "disable", sizeof("disable") - 1)) { int name = 0; result = acpi_debug_trace((char *)&name, trace_debug_level, trace_debug_layer, 0); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 9fe90e9fecb56ada8629a55c472c67653bbd02f5..edda74a43406b5232c01a65ac030303abab830f4 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -106,7 +106,9 @@ static const struct acpi_device_id thermal_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, thermal_device_ids); +#ifdef CONFIG_PM_SLEEP static int acpi_thermal_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(acpi_thermal_pm, NULL, acpi_thermal_resume); static struct acpi_driver acpi_thermal_driver = { @@ -1041,6 +1043,7 @@ static int acpi_thermal_remove(struct acpi_device *device, int type) return 0; } +#ifdef CONFIG_PM_SLEEP static int acpi_thermal_resume(struct device *dev) { struct acpi_thermal *tz; @@ -1075,6 +1078,7 @@ static int acpi_thermal_resume(struct device *dev) return AE_OK; } +#endif static int thermal_act(const struct dmi_system_id *d) { diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 2be8ef1d30935af81a9b7ac3b721750fdda6b3cd..27cecd313e7588386960244548b391bfddac2a55 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -115,7 +115,7 @@ config SATA_SIL24 If unsure, say N. config ATA_SFF - bool "ATA SFF support" + bool "ATA SFF support (for legacy IDE and PATA)" default y help This option adds support for ATA controllers with SFF diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 062e6a1a248fe97b69cd2047017a88ded3f2164d..7862d17976b7532f48204cbf4210ffb6d4984f97 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -256,10 +256,21 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x8c07), board_ahci }, /* Lynx Point RAID */ { PCI_VDEVICE(INTEL, 0x8c0e), board_ahci }, /* Lynx Point RAID */ { PCI_VDEVICE(INTEL, 0x8c0f), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x9c02), board_ahci }, /* Lynx Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9c03), board_ahci }, /* Lynx Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9c04), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c05), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c06), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c07), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c0e), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c0f), board_ahci }, /* Lynx Point-LP RAID */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr }, + /* JMicron 362B and 362C have an AHCI function with IDE class code */ + { PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr }, + { PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr }, /* ATI */ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ @@ -385,6 +396,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9125 */ { PCI_DEVICE(0x1b4b, 0x917a), .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ + { PCI_DEVICE(0x1b4b, 0x9192), + .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */ { PCI_DEVICE(0x1b4b, 0x91a3), .driver_data = board_ahci_yes_fbs }, @@ -392,7 +405,10 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ /* Asmedia */ - { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1061 */ + { PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci }, /* ASM1060 */ + { PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci }, /* ASM1060 */ + { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */ + { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index c2594ddf25b00f54d22b51c66f23db5d54d47222..57eb1c212a4ce8ee267d36b3f920d3011f96b832 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -320,6 +320,7 @@ extern struct device_attribute *ahci_sdev_attrs[]; extern struct ata_port_operations ahci_ops; extern struct ata_port_operations ahci_pmp_retry_srst_ops; +unsigned int ahci_dev_classify(struct ata_port *ap); void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, u32 opts); void ahci_save_initial_config(struct device *dev, diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 3c809bfbccf58a2af573be99719a4fda77bd3815..ef773e12af79d2c931e37852e7c31b716a00e51e 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -329,6 +329,14 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (Lynx Point) */ { 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (DH89xxCC) */ { 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, { } /* terminate list */ diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index f9eaa82311a9a191dd56fe06881dd318d5c518eb..555c07afa05bc6f82d6cc0357684f1f8e8b9f8da 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1139,7 +1139,7 @@ static void ahci_dev_config(struct ata_device *dev) } } -static unsigned int ahci_dev_classify(struct ata_port *ap) +unsigned int ahci_dev_classify(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); struct ata_taskfile tf; @@ -1153,6 +1153,7 @@ static unsigned int ahci_dev_classify(struct ata_port *ap) return ata_dev_classify(&tf); } +EXPORT_SYMBOL_GPL(ahci_dev_classify); void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, u32 opts) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 902b5a457170958f4d805ae30185cee170e6b6e9..fd9ecf74e631afc800e56927069d97bd61774862 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -60,17 +60,7 @@ acpi_handle ata_ap_acpi_handle(struct ata_port *ap) if (ap->flags & ATA_FLAG_ACPI_SATA) return NULL; - /* - * If acpi bind operation has already happened, we can get the handle - * for the port by checking the corresponding scsi_host device's - * firmware node, otherwise we will need to find out the handle from - * its parent's acpi node. - */ - if (ap->scsi_host) - return DEVICE_ACPI_HANDLE(&ap->scsi_host->shost_gendev); - else - return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), - ap->port_no); + return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), ap->port_no); } EXPORT_SYMBOL(ata_ap_acpi_handle); @@ -1101,6 +1091,9 @@ static int ata_acpi_bind_host(struct ata_port *ap, acpi_handle *handle) if (!*handle) return -ENODEV; + if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0) + ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; + return 0; } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index fadd5866d40fd29b2eb70df29e3d026e2e3722db..8e1039c8e15975aced4e6a359dc4a0451a58bc4b 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4062,7 +4062,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA }, { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, - { "2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA }, + { " 2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA }, /* Odd clown on sil3726/4726 PMPs */ { "Config Disk", NULL, ATA_HORKAGE_DISABLE }, @@ -4128,6 +4128,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Devices that do not need bridging limits applied */ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, + { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, }, /* Devices which aren't very happy with higher link speeds */ { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, }, diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 361c75cea57b9d1836ca6be599343f019759833b..24e51056ac26a857c1db028b9eb71450a0608d45 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -20,6 +20,7 @@ #include #include #include +#include #define DRV_NAME "pata_atiixp" #define DRV_VERSION "0.4.6" @@ -33,11 +34,26 @@ enum { ATIIXP_IDE_UDMA_MODE = 0x56 }; +static const struct dmi_system_id attixp_cable_override_dmi_table[] = { + { + /* Board has onboard PATA<->SATA converters */ + .ident = "MSI E350DM-E33", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "MSI"), + DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"), + }, + }, + { } +}; + static int atiixp_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 udma; + if (dmi_check_system(attixp_cable_override_dmi_table)) + return ATA_CBL_PATA40_SHORT; + /* Hack from drivers/ide/pci. Really we want to know how to do the raw detection not play follow the bios mode guess */ pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 24712adf69dfb8a876ff98d2d39df1182de03942..311be18d3f03beff563901943bc0b08a49ecc80a 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -65,6 +65,8 @@ #include #include #include +#include +#include #include #include #include @@ -4026,7 +4028,7 @@ static int mv_platform_probe(struct platform_device *pdev) struct ata_host *host; struct mv_host_priv *hpriv; struct resource *res; - int n_ports = 0; + int n_ports = 0, irq = 0; int rc; #if defined(CONFIG_HAVE_CLK) int port; @@ -4050,8 +4052,14 @@ static int mv_platform_probe(struct platform_device *pdev) return -EINVAL; /* allocate host */ - mv_platform_data = pdev->dev.platform_data; - n_ports = mv_platform_data->n_ports; + if (pdev->dev.of_node) { + of_property_read_u32(pdev->dev.of_node, "nr-ports", &n_ports); + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + } else { + mv_platform_data = pdev->dev.platform_data; + n_ports = mv_platform_data->n_ports; + irq = platform_get_irq(pdev, 0); + } host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); @@ -4109,8 +4117,7 @@ static int mv_platform_probe(struct platform_device *pdev) dev_info(&pdev->dev, "slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH, host->n_ports); - rc = ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt, - IRQF_SHARED, &mv6_sht); + rc = ata_host_activate(host, irq, mv_interrupt, IRQF_SHARED, &mv6_sht); if (!rc) return 0; @@ -4205,15 +4212,24 @@ static int mv_platform_resume(struct platform_device *pdev) #define mv_platform_resume NULL #endif +#ifdef CONFIG_OF +static struct of_device_id mv_sata_dt_ids[] __devinitdata = { + { .compatible = "marvell,orion-sata", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mv_sata_dt_ids); +#endif + static struct platform_driver mv_platform_driver = { - .probe = mv_platform_probe, - .remove = __devexit_p(mv_platform_remove), - .suspend = mv_platform_suspend, - .resume = mv_platform_resume, - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, + .probe = mv_platform_probe, + .remove = __devexit_p(mv_platform_remove), + .suspend = mv_platform_suspend, + .resume = mv_platform_resume, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mv_sata_dt_ids), + }, }; diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index d4386019af5d59657812021e608a506adde44fe3..96cce6d5319592b20fbc8536c350d3cffdd841e8 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -2362,7 +2362,7 @@ static int __devinit ia_init(struct atm_dev *dev) { printk(DEV_LABEL " (itf %d): can't set up page mapping\n", dev->number); - return error; + return -ENOMEM; } IF_INIT(printk(DEV_LABEL " (itf %d): rev.%d,base=%p,irq=%d\n", dev->number, iadev->pci->revision, base, iadev->irq);) diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index 9b21469482aead0e69004e3285258fd3a0576796..08b4c520938463fd989bba879d791a3e418efd39 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -196,6 +196,7 @@ config CMA bool "Contiguous Memory Allocator (EXPERIMENTAL)" depends on HAVE_DMA_CONTIGUOUS && HAVE_MEMBLOCK && EXPERIMENTAL select MIGRATION + select MEMORY_ISOLATION help This enables the Contiguous Memory Allocator which allows drivers to allocate big physically-contiguous blocks of memory for use with diff --git a/drivers/base/core.c b/drivers/base/core.c index f338037a4f3d9109e4d69da7a22a4e41070615b4..5e6e00bc1652a064530818e5f87416604eba7e25 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1865,6 +1865,7 @@ int __dev_printk(const char *level, const struct device *dev, struct va_format *vaf) { char dict[128]; + const char *level_extra = ""; size_t dictlen = 0; const char *subsys; @@ -1911,10 +1912,14 @@ int __dev_printk(const char *level, const struct device *dev, "DEVICE=+%s:%s", subsys, dev_name(dev)); } skip: + if (level[2]) + level_extra = &level[2]; /* skip past KERN_SOH "L" */ + return printk_emit(0, level[1] - '0', dictlen ? dict : NULL, dictlen, - "%s %s: %pV", - dev_driver_string(dev), dev_name(dev), vaf); + "%s %s: %s%pV", + dev_driver_string(dev), dev_name(dev), + level_extra, vaf); } EXPORT_SYMBOL(__dev_printk); diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c index d91a3a0b23258a516f352162a5d051df17959e80..deb4a456cf8365ac3a45480135786c160473964f 100644 --- a/drivers/base/devtmpfs.c +++ b/drivers/base/devtmpfs.c @@ -156,9 +156,7 @@ static int dev_mkdir(const char *name, umode_t mode) if (!err) /* mark as kernel-created inode */ dentry->d_inode->i_private = &thread; - dput(dentry); - mutex_unlock(&path.dentry->d_inode->i_mutex); - path_put(&path); + done_path_create(&path, dentry); return err; } @@ -218,10 +216,7 @@ static int handle_create(const char *nodename, umode_t mode, struct device *dev) /* mark as kernel-created inode */ dentry->d_inode->i_private = &thread; } - dput(dentry); - - mutex_unlock(&path.dentry->d_inode->i_mutex); - path_put(&path); + done_path_create(&path, dentry); return err; } diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c index 78efb0306a446027f7fce1019572902f5aaa805b..34d94c762a1e79415fc00b0fc59caf034a3e186a 100644 --- a/drivers/base/dma-contiguous.c +++ b/drivers/base/dma-contiguous.c @@ -250,7 +250,7 @@ int __init dma_declare_contiguous(struct device *dev, unsigned long size, return -EINVAL; /* Sanitise input arguments */ - alignment = PAGE_SIZE << max(MAX_ORDER, pageblock_order); + alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); base = ALIGN(base, alignment); size = ALIGN(size, alignment); limit &= ~(alignment - 1); diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index 869d7ff2227f8aa87ba5a390644558e7e0585099..eb78e9640c4a86c0df9c0464e7dbd0b37f4ab75d 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -169,8 +169,7 @@ void pm_clk_init(struct device *dev) */ int pm_clk_create(struct device *dev) { - int ret = dev_pm_get_subsys_data(dev); - return ret < 0 ? ret : 0; + return dev_pm_get_subsys_data(dev); } /** diff --git a/drivers/base/power/common.c b/drivers/base/power/common.c index a14085cc613fdfd2116afeb9da0f620b96c492f7..39c32529b83374c36eda18188c393930732ad99f 100644 --- a/drivers/base/power/common.c +++ b/drivers/base/power/common.c @@ -24,7 +24,6 @@ int dev_pm_get_subsys_data(struct device *dev) { struct pm_subsys_data *psd; - int ret = 0; psd = kzalloc(sizeof(*psd), GFP_KERNEL); if (!psd) @@ -40,7 +39,6 @@ int dev_pm_get_subsys_data(struct device *dev) dev->power.subsys_data = psd; pm_clk_init(dev); psd = NULL; - ret = 1; } spin_unlock_irq(&dev->power.lock); @@ -48,7 +46,7 @@ int dev_pm_get_subsys_data(struct device *dev) /* kfree() verifies that its argument is nonzero. */ kfree(psd); - return ret; + return 0; } EXPORT_SYMBOL_GPL(dev_pm_get_subsys_data); diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 59894873a3b37de88a50d3b5e1f22ce67e454858..7d9c1cb1c39a7760081bae4d518efd8acf835902 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -147,6 +147,8 @@ static int rpm_check_suspend_allowed(struct device *dev) || (dev->power.request_pending && dev->power.request == RPM_REQ_RESUME)) retval = -EAGAIN; + else if (__dev_pm_qos_read_value(dev) < 0) + retval = -EPERM; else if (dev->power.runtime_status == RPM_SUSPENDED) retval = 1; @@ -388,7 +390,6 @@ static int rpm_suspend(struct device *dev, int rpmflags) goto repeat; } - dev->power.deferred_resume = false; if (dev->power.no_callbacks) goto no_callback; /* Assume success. */ @@ -403,12 +404,6 @@ static int rpm_suspend(struct device *dev, int rpmflags) goto out; } - if (__dev_pm_qos_read_value(dev) < 0) { - /* Negative PM QoS constraint means "never suspend". */ - retval = -EPERM; - goto out; - } - __update_runtime_status(dev, RPM_SUSPENDING); if (dev->pm_domain) @@ -440,6 +435,7 @@ static int rpm_suspend(struct device *dev, int rpmflags) wake_up_all(&dev->power.wait_queue); if (dev->power.deferred_resume) { + dev->power.deferred_resume = false; rpm_resume(dev, 0); retval = -EAGAIN; goto out; @@ -584,6 +580,7 @@ static int rpm_resume(struct device *dev, int rpmflags) || dev->parent->power.runtime_status == RPM_ACTIVE) { atomic_inc(&dev->parent->power.child_count); spin_unlock(&dev->parent->power.lock); + retval = 1; goto no_callback; /* Assume success. */ } spin_unlock(&dev->parent->power.lock); @@ -664,7 +661,7 @@ static int rpm_resume(struct device *dev, int rpmflags) } wake_up_all(&dev->power.wait_queue); - if (!retval) + if (retval >= 0) rpm_idle(dev, RPM_ASYNC); out: diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c index 11b32d2642dfc25dd4b1d22b30c9e3bf0cf65555..a6e5672c67e77f473a8685884ff4626791e99ab2 100644 --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c @@ -272,6 +272,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, { 0, }, }; diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c index 26823d97fd9f60925967b51a4fdfc158454bbe1b..9ea4627dc0c233a808f322816c2560fd9c145d3d 100644 --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -507,7 +507,9 @@ static bool bcma_sprom_onchip_available(struct bcma_bus *bus) /* for these chips OTP is always available */ present = true; break; - + case BCMA_CHIP_ID_BCM43228: + present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT; + break; default: present = false; break; diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index de0435e63b02cbd349c5dcc282682359f6f85934..887f68f6d79a9e615beba7525cb9d0e671917c4e 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -35,6 +35,7 @@ new_skb(ulong len) skb_reset_mac_header(skb); skb_reset_network_header(skb); skb->protocol = __constant_htons(ETH_P_AOE); + skb_checksum_none_assert(skb); } return skb; } diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index acda773b3720878495d14f5ebfbe1a82f50c0f74..da3311129a0c5b87b8cc8b3718cc63b5bdfd3928 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -763,16 +763,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout, { case CMD_TARGET_STATUS: /* Pass it up to the upper layers... */ - if( ei->ScsiStatus) - { -#if 0 - printk(KERN_WARNING "cciss: cmd %p " - "has SCSI Status = %x\n", - c, ei->ScsiStatus); -#endif - cmd->result |= (ei->ScsiStatus << 1); - } - else { /* scsi status is zero??? How??? */ + if (!ei->ScsiStatus) { /* Ordinarily, this case should never happen, but there is a bug in some released firmware revisions that allows it to happen @@ -804,6 +795,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout, } break; case CMD_PROTOCOL_ERR: + cmd->result = DID_ERROR << 16; dev_warn(&h->pdev->dev, "%p has protocol error\n", c); break; diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c index e54e31b02b88eb6e927072745f345871a8d96203..3fbef018ce555fe47a716a0de01c2df837a2cc9e 100644 --- a/drivers/block/drbd/drbd_actlog.c +++ b/drivers/block/drbd/drbd_actlog.c @@ -411,7 +411,7 @@ w_al_write_transaction(struct drbd_conf *mdev, struct drbd_work *w, int unused) + mdev->ldev->md.al_offset + mdev->al_tr_pos; if (!drbd_md_sync_page_io(mdev, mdev->ldev, sector, WRITE)) - drbd_chk_io_error(mdev, 1, true); + drbd_chk_io_error(mdev, 1, DRBD_META_IO_ERROR); if (++mdev->al_tr_pos > div_ceil(mdev->act_log->nr_elements, AL_EXTENTS_PT)) @@ -876,7 +876,11 @@ int __drbd_set_out_of_sync(struct drbd_conf *mdev, sector_t sector, int size, unsigned int enr, count = 0; struct lc_element *e; - if (size <= 0 || (size & 0x1ff) != 0 || size > DRBD_MAX_BIO_SIZE) { + /* this should be an empty REQ_FLUSH */ + if (size == 0) + return 0; + + if (size < 0 || (size & 0x1ff) != 0 || size > DRBD_MAX_BIO_SIZE) { dev_err(DEV, "sector: %llus, size: %d\n", (unsigned long long)sector, size); return 0; diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index fcb956bb4b4c525875f961e7c2398b20c35723f4..d84566496746aef57baf19dae86528bc202038cb 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -889,6 +889,7 @@ struct bm_aio_ctx { unsigned int done; unsigned flags; #define BM_AIO_COPY_PAGES 1 +#define BM_WRITE_ALL_PAGES 2 int error; struct kref kref; }; @@ -1059,7 +1060,8 @@ static int bm_rw(struct drbd_conf *mdev, int rw, unsigned flags, unsigned lazy_w if (lazy_writeout_upper_idx && i == lazy_writeout_upper_idx) break; if (rw & WRITE) { - if (bm_test_page_unchanged(b->bm_pages[i])) { + if (!(flags & BM_WRITE_ALL_PAGES) && + bm_test_page_unchanged(b->bm_pages[i])) { dynamic_dev_dbg(DEV, "skipped bm write for idx %u\n", i); continue; } @@ -1096,7 +1098,7 @@ static int bm_rw(struct drbd_conf *mdev, int rw, unsigned flags, unsigned lazy_w if (ctx->error) { dev_alert(DEV, "we had at least one MD IO ERROR during bitmap IO\n"); - drbd_chk_io_error(mdev, 1, true); + drbd_chk_io_error(mdev, 1, DRBD_META_IO_ERROR); err = -EIO; /* ctx->error ? */ } @@ -1140,6 +1142,17 @@ int drbd_bm_write(struct drbd_conf *mdev) __must_hold(local) return bm_rw(mdev, WRITE, 0, 0); } +/** + * drbd_bm_write_all() - Write the whole bitmap to its on disk location. + * @mdev: DRBD device. + * + * Will write all pages. + */ +int drbd_bm_write_all(struct drbd_conf *mdev) __must_hold(local) +{ + return bm_rw(mdev, WRITE, BM_WRITE_ALL_PAGES, 0); +} + /** * drbd_bm_lazy_write_out() - Write bitmap pages 0 to @upper_idx-1, if they have changed. * @mdev: DRBD device. @@ -1212,7 +1225,7 @@ int drbd_bm_write_page(struct drbd_conf *mdev, unsigned int idx) __must_hold(loc wait_until_done_or_disk_failure(mdev, mdev->ldev, &ctx->done); if (ctx->error) - drbd_chk_io_error(mdev, 1, true); + drbd_chk_io_error(mdev, 1, DRBD_META_IO_ERROR); /* that should force detach, so the in memory bitmap will be * gone in a moment as well. */ diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 02f013a073a75b66fe73c8658f1cde96ea7102a7..b953cc7c9c00ce4fb13885f2631211c6046ed58d 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -813,7 +813,6 @@ enum { SIGNAL_ASENDER, /* whether asender wants to be interrupted */ SEND_PING, /* whether asender should send a ping asap */ - UNPLUG_QUEUED, /* only relevant with kernel 2.4 */ UNPLUG_REMOTE, /* sending a "UnplugRemote" could help */ MD_DIRTY, /* current uuids and flags not yet on disk */ DISCARD_CONCURRENT, /* Set on one node, cleared on the peer! */ @@ -824,7 +823,6 @@ enum { CRASHED_PRIMARY, /* This node was a crashed primary. * Gets cleared when the state.conn * goes into C_CONNECTED state. */ - NO_BARRIER_SUPP, /* underlying block device doesn't implement barriers */ CONSIDER_RESYNC, MD_NO_FUA, /* Users wants us to not use FUA/FLUSH on meta data dev */ @@ -834,6 +832,7 @@ enum { BITMAP_IO_QUEUED, /* Started bitmap IO */ GO_DISKLESS, /* Disk is being detached, on io-error or admin request. */ WAS_IO_ERROR, /* Local disk failed returned IO error */ + FORCE_DETACH, /* Force-detach from local disk, aborting any pending local IO */ RESYNC_AFTER_NEG, /* Resync after online grow after the attach&negotiate finished. */ NET_CONGESTED, /* The data socket is congested */ @@ -851,6 +850,13 @@ enum { AL_SUSPENDED, /* Activity logging is currently suspended. */ AHEAD_TO_SYNC_SOURCE, /* Ahead -> SyncSource queued */ STATE_SENT, /* Do not change state/UUIDs while this is set */ + + CALLBACK_PENDING, /* Whether we have a call_usermodehelper(, UMH_WAIT_PROC) + * pending, from drbd worker context. + * If set, bdi_write_congested() returns true, + * so shrink_page_list() would not recurse into, + * and potentially deadlock on, this drbd worker. + */ }; struct drbd_bitmap; /* opaque for drbd_conf */ @@ -1130,8 +1136,8 @@ struct drbd_conf { int rs_in_flight; /* resync sectors in flight (to proxy, in proxy and from proxy) */ int rs_planed; /* resync sectors already planned */ atomic_t ap_in_flight; /* App sectors in flight (waiting for ack) */ - int peer_max_bio_size; - int local_max_bio_size; + unsigned int peer_max_bio_size; + unsigned int local_max_bio_size; }; static inline struct drbd_conf *minor_to_mdev(unsigned int minor) @@ -1435,9 +1441,9 @@ struct bm_extent { * hash table. */ #define HT_SHIFT 8 #define DRBD_MAX_BIO_SIZE (1U<<(9+HT_SHIFT)) -#define DRBD_MAX_BIO_SIZE_SAFE (1 << 12) /* Works always = 4k */ +#define DRBD_MAX_BIO_SIZE_SAFE (1U << 12) /* Works always = 4k */ -#define DRBD_MAX_SIZE_H80_PACKET (1 << 15) /* The old header only allows packets up to 32Kib data */ +#define DRBD_MAX_SIZE_H80_PACKET (1U << 15) /* The old header only allows packets up to 32Kib data */ /* Number of elements in the app_reads_hash */ #define APP_R_HSIZE 15 @@ -1463,6 +1469,7 @@ extern int drbd_bm_e_weight(struct drbd_conf *mdev, unsigned long enr); extern int drbd_bm_write_page(struct drbd_conf *mdev, unsigned int idx) __must_hold(local); extern int drbd_bm_read(struct drbd_conf *mdev) __must_hold(local); extern int drbd_bm_write(struct drbd_conf *mdev) __must_hold(local); +extern int drbd_bm_write_all(struct drbd_conf *mdev) __must_hold(local); extern int drbd_bm_write_copy_pages(struct drbd_conf *mdev) __must_hold(local); extern unsigned long drbd_bm_ALe_set_all(struct drbd_conf *mdev, unsigned long al_enr); @@ -1840,12 +1847,20 @@ static inline int drbd_request_state(struct drbd_conf *mdev, return _drbd_request_state(mdev, mask, val, CS_VERBOSE + CS_ORDERED); } +enum drbd_force_detach_flags { + DRBD_IO_ERROR, + DRBD_META_IO_ERROR, + DRBD_FORCE_DETACH, +}; + #define __drbd_chk_io_error(m,f) __drbd_chk_io_error_(m,f, __func__) -static inline void __drbd_chk_io_error_(struct drbd_conf *mdev, int forcedetach, const char *where) +static inline void __drbd_chk_io_error_(struct drbd_conf *mdev, + enum drbd_force_detach_flags forcedetach, + const char *where) { switch (mdev->ldev->dc.on_io_error) { case EP_PASS_ON: - if (!forcedetach) { + if (forcedetach == DRBD_IO_ERROR) { if (__ratelimit(&drbd_ratelimit_state)) dev_err(DEV, "Local IO failed in %s.\n", where); if (mdev->state.disk > D_INCONSISTENT) @@ -1856,6 +1871,8 @@ static inline void __drbd_chk_io_error_(struct drbd_conf *mdev, int forcedetach, case EP_DETACH: case EP_CALL_HELPER: set_bit(WAS_IO_ERROR, &mdev->flags); + if (forcedetach == DRBD_FORCE_DETACH) + set_bit(FORCE_DETACH, &mdev->flags); if (mdev->state.disk > D_FAILED) { _drbd_set_state(_NS(mdev, disk, D_FAILED), CS_HARD, NULL); dev_err(DEV, @@ -1875,7 +1892,7 @@ static inline void __drbd_chk_io_error_(struct drbd_conf *mdev, int forcedetach, */ #define drbd_chk_io_error(m,e,f) drbd_chk_io_error_(m,e,f, __func__) static inline void drbd_chk_io_error_(struct drbd_conf *mdev, - int error, int forcedetach, const char *where) + int error, enum drbd_force_detach_flags forcedetach, const char *where) { if (error) { unsigned long flags; @@ -2405,15 +2422,17 @@ static inline void dec_ap_bio(struct drbd_conf *mdev) int ap_bio = atomic_dec_return(&mdev->ap_bio_cnt); D_ASSERT(ap_bio >= 0); + + if (ap_bio == 0 && test_bit(BITMAP_IO, &mdev->flags)) { + if (!test_and_set_bit(BITMAP_IO_QUEUED, &mdev->flags)) + drbd_queue_work(&mdev->data.work, &mdev->bm_io_work.w); + } + /* this currently does wake_up for every dec_ap_bio! * maybe rather introduce some type of hysteresis? * e.g. (ap_bio == mxb/2 || ap_bio == 0) ? */ if (ap_bio < mxb) wake_up(&mdev->misc_wait); - if (ap_bio == 0 && test_bit(BITMAP_IO, &mdev->flags)) { - if (!test_and_set_bit(BITMAP_IO_QUEUED, &mdev->flags)) - drbd_queue_work(&mdev->data.work, &mdev->bm_io_work.w); - } } static inline int drbd_set_ed_uuid(struct drbd_conf *mdev, u64 val) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 920ede2829d6c5e467e177ac43a3e97e9f550aac..f93a0320e952dd6b07fb8c73739ee73d3c1af0a0 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -79,6 +79,7 @@ static int w_md_sync(struct drbd_conf *mdev, struct drbd_work *w, int unused); static void md_sync_timer_fn(unsigned long data); static int w_bitmap_io(struct drbd_conf *mdev, struct drbd_work *w, int unused); static int w_go_diskless(struct drbd_conf *mdev, struct drbd_work *w, int unused); +static void _tl_clear(struct drbd_conf *mdev); MODULE_AUTHOR("Philipp Reisner , " "Lars Ellenberg "); @@ -432,19 +433,10 @@ static void _tl_restart(struct drbd_conf *mdev, enum drbd_req_event what) /* Actions operating on the disk state, also want to work on requests that got barrier acked. */ - switch (what) { - case fail_frozen_disk_io: - case restart_frozen_disk_io: - list_for_each_safe(le, tle, &mdev->barrier_acked_requests) { - req = list_entry(le, struct drbd_request, tl_requests); - _req_mod(req, what); - } - case connection_lost_while_pending: - case resend: - break; - default: - dev_err(DEV, "what = %d in _tl_restart()\n", what); + list_for_each_safe(le, tle, &mdev->barrier_acked_requests) { + req = list_entry(le, struct drbd_request, tl_requests); + _req_mod(req, what); } } @@ -458,12 +450,17 @@ static void _tl_restart(struct drbd_conf *mdev, enum drbd_req_event what) * receiver thread and the worker thread. */ void tl_clear(struct drbd_conf *mdev) +{ + spin_lock_irq(&mdev->req_lock); + _tl_clear(mdev); + spin_unlock_irq(&mdev->req_lock); +} + +static void _tl_clear(struct drbd_conf *mdev) { struct list_head *le, *tle; struct drbd_request *r; - spin_lock_irq(&mdev->req_lock); - _tl_restart(mdev, connection_lost_while_pending); /* we expect this list to be empty. */ @@ -482,7 +479,6 @@ void tl_clear(struct drbd_conf *mdev) memset(mdev->app_reads_hash, 0, APP_R_HSIZE*sizeof(void *)); - spin_unlock_irq(&mdev->req_lock); } void tl_restart(struct drbd_conf *mdev, enum drbd_req_event what) @@ -1476,12 +1472,12 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, if (ns.susp_fen) { /* case1: The outdate peer handler is successful: */ if (os.pdsk > D_OUTDATED && ns.pdsk <= D_OUTDATED) { - tl_clear(mdev); if (test_bit(NEW_CUR_UUID, &mdev->flags)) { drbd_uuid_new_current(mdev); clear_bit(NEW_CUR_UUID, &mdev->flags); } spin_lock_irq(&mdev->req_lock); + _tl_clear(mdev); _drbd_set_state(_NS(mdev, susp_fen, 0), CS_VERBOSE, NULL); spin_unlock_irq(&mdev->req_lock); } @@ -1514,6 +1510,13 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, /* Do not change the order of the if above and the two below... */ if (os.pdsk == D_DISKLESS && ns.pdsk > D_DISKLESS) { /* attach on the peer */ + /* we probably will start a resync soon. + * make sure those things are properly reset. */ + mdev->rs_total = 0; + mdev->rs_failed = 0; + atomic_set(&mdev->rs_pending_cnt, 0); + drbd_rs_cancel_all(mdev); + drbd_send_uuids(mdev); drbd_send_state(mdev, ns); } @@ -1630,9 +1633,24 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, eh = mdev->ldev->dc.on_io_error; was_io_error = test_and_clear_bit(WAS_IO_ERROR, &mdev->flags); - /* Immediately allow completion of all application IO, that waits - for completion from the local disk. */ - tl_abort_disk_io(mdev); + if (was_io_error && eh == EP_CALL_HELPER) + drbd_khelper(mdev, "local-io-error"); + + /* Immediately allow completion of all application IO, + * that waits for completion from the local disk, + * if this was a force-detach due to disk_timeout + * or administrator request (drbdsetup detach --force). + * Do NOT abort otherwise. + * Aborting local requests may cause serious problems, + * if requests are completed to upper layers already, + * and then later the already submitted local bio completes. + * This can cause DMA into former bio pages that meanwhile + * have been re-used for other things. + * So aborting local requests may cause crashes, + * or even worse, silent data corruption. + */ + if (test_and_clear_bit(FORCE_DETACH, &mdev->flags)) + tl_abort_disk_io(mdev); /* current state still has to be D_FAILED, * there is only one way out: to D_DISKLESS, @@ -1653,9 +1671,6 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, drbd_md_sync(mdev); } put_ldev(mdev); - - if (was_io_error && eh == EP_CALL_HELPER) - drbd_khelper(mdev, "local-io-error"); } /* second half of local IO error, failure to attach, @@ -1669,10 +1684,6 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, "ASSERT FAILED: disk is %s while going diskless\n", drbd_disk_str(mdev->state.disk)); - mdev->rs_total = 0; - mdev->rs_failed = 0; - atomic_set(&mdev->rs_pending_cnt, 0); - if (ns.conn >= C_CONNECTED) drbd_send_state(mdev, ns); @@ -2194,7 +2205,8 @@ int drbd_send_sizes(struct drbd_conf *mdev, int trigger_reply, enum dds_flags fl { struct p_sizes p; sector_t d_size, u_size; - int q_order_type, max_bio_size; + int q_order_type; + unsigned int max_bio_size; int ok; if (get_ldev_if_state(mdev, D_NEGOTIATING)) { @@ -2203,7 +2215,7 @@ int drbd_send_sizes(struct drbd_conf *mdev, int trigger_reply, enum dds_flags fl u_size = mdev->ldev->dc.disk_size; q_order_type = drbd_queue_order_type(mdev); max_bio_size = queue_max_hw_sectors(mdev->ldev->backing_bdev->bd_disk->queue) << 9; - max_bio_size = min_t(int, max_bio_size, DRBD_MAX_BIO_SIZE); + max_bio_size = min(max_bio_size, DRBD_MAX_BIO_SIZE); put_ldev(mdev); } else { d_size = 0; @@ -2214,7 +2226,7 @@ int drbd_send_sizes(struct drbd_conf *mdev, int trigger_reply, enum dds_flags fl /* Never allow old drbd (up to 8.3.7) to see more than 32KiB */ if (mdev->agreed_pro_version <= 94) - max_bio_size = min_t(int, max_bio_size, DRBD_MAX_SIZE_H80_PACKET); + max_bio_size = min(max_bio_size, DRBD_MAX_SIZE_H80_PACKET); p.d_size = cpu_to_be64(d_size); p.u_size = cpu_to_be64(u_size); @@ -3521,9 +3533,9 @@ static void drbd_cleanup(void) } /** - * drbd_congested() - Callback for pdflush + * drbd_congested() - Callback for the flusher thread * @congested_data: User data - * @bdi_bits: Bits pdflush is currently interested in + * @bdi_bits: Bits the BDI flusher thread is currently interested in * * Returns 1<flags)) { + r |= (1 << BDI_async_congested); + /* Without good local data, we would need to read from remote, + * and that would need the worker thread as well, which is + * currently blocked waiting for that usermode helper to + * finish. + */ + if (!get_ldev_if_state(mdev, D_UP_TO_DATE)) + r |= (1 << BDI_sync_congested); + else + put_ldev(mdev); + r &= bdi_bits; + reason = 'c'; + goto out; + } + if (get_ldev(mdev)) { q = bdev_get_queue(mdev->ldev->backing_bdev); r = bdi_congested(&q->backing_dev_info, bdi_bits); @@ -3604,6 +3632,7 @@ struct drbd_conf *drbd_new_device(unsigned int minor) q->backing_dev_info.congested_data = mdev; blk_queue_make_request(q, drbd_make_request); + blk_queue_flush(q, REQ_FLUSH | REQ_FUA); /* Setting the max_hw_sectors to an odd value of 8kibyte here This triggers a max_bio_size message upon first attach or connect */ blk_queue_max_hw_sectors(q, DRBD_MAX_BIO_SIZE_SAFE >> 8); @@ -3870,7 +3899,7 @@ void drbd_md_sync(struct drbd_conf *mdev) if (!drbd_md_sync_page_io(mdev, mdev->ldev, sector, WRITE)) { /* this was a try anyways ... */ dev_err(DEV, "meta data update failed!\n"); - drbd_chk_io_error(mdev, 1, true); + drbd_chk_io_error(mdev, 1, DRBD_META_IO_ERROR); } /* Update mdev->ldev->md.la_size_sect, @@ -3950,9 +3979,9 @@ int drbd_md_read(struct drbd_conf *mdev, struct drbd_backing_dev *bdev) spin_lock_irq(&mdev->req_lock); if (mdev->state.conn < C_CONNECTED) { - int peer; + unsigned int peer; peer = be32_to_cpu(buffer->la_peer_max_bio_size); - peer = max_t(int, peer, DRBD_MAX_BIO_SIZE_SAFE); + peer = max(peer, DRBD_MAX_BIO_SIZE_SAFE); mdev->peer_max_bio_size = peer; } spin_unlock_irq(&mdev->req_lock); diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index 6d4de6a72e8069018b2b4d050b7ef2aa8b259259..edb490aad8b44fa507da3d72724b5df925a020e4 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -147,6 +147,9 @@ int drbd_khelper(struct drbd_conf *mdev, char *cmd) char *argv[] = {usermode_helper, cmd, mb, NULL }; int ret; + if (current == mdev->worker.task) + set_bit(CALLBACK_PENDING, &mdev->flags); + snprintf(mb, 12, "minor-%d", mdev_to_minor(mdev)); if (get_net_conf(mdev)) { @@ -189,6 +192,9 @@ int drbd_khelper(struct drbd_conf *mdev, char *cmd) usermode_helper, cmd, mb, (ret >> 8) & 0xff, ret); + if (current == mdev->worker.task) + clear_bit(CALLBACK_PENDING, &mdev->flags); + if (ret < 0) /* Ignore any ERRNOs we got. */ ret = 0; @@ -668,8 +674,8 @@ enum determine_dev_size drbd_determine_dev_size(struct drbd_conf *mdev, enum dds la_size_changed && md_moved ? "size changed and md moved" : la_size_changed ? "size changed" : "md moved"); /* next line implicitly does drbd_suspend_io()+drbd_resume_io() */ - err = drbd_bitmap_io(mdev, &drbd_bm_write, - "size changed", BM_LOCKED_MASK); + err = drbd_bitmap_io(mdev, md_moved ? &drbd_bm_write_all : &drbd_bm_write, + "size changed", BM_LOCKED_MASK); if (err) { rv = dev_size_error; goto out; @@ -795,8 +801,8 @@ static int drbd_check_al_size(struct drbd_conf *mdev) static void drbd_setup_queue_param(struct drbd_conf *mdev, unsigned int max_bio_size) { struct request_queue * const q = mdev->rq_queue; - int max_hw_sectors = max_bio_size >> 9; - int max_segments = 0; + unsigned int max_hw_sectors = max_bio_size >> 9; + unsigned int max_segments = 0; if (get_ldev_if_state(mdev, D_ATTACHING)) { struct request_queue * const b = mdev->ldev->backing_bdev->bd_disk->queue; @@ -829,7 +835,7 @@ static void drbd_setup_queue_param(struct drbd_conf *mdev, unsigned int max_bio_ void drbd_reconsider_max_bio_size(struct drbd_conf *mdev) { - int now, new, local, peer; + unsigned int now, new, local, peer; now = queue_max_hw_sectors(mdev->rq_queue) << 9; local = mdev->local_max_bio_size; /* Eventually last known value, from volatile memory */ @@ -840,13 +846,14 @@ void drbd_reconsider_max_bio_size(struct drbd_conf *mdev) mdev->local_max_bio_size = local; put_ldev(mdev); } + local = min(local, DRBD_MAX_BIO_SIZE); /* We may ignore peer limits if the peer is modern enough. Because new from 8.3.8 onwards the peer can use multiple BIOs for a single peer_request */ if (mdev->state.conn >= C_CONNECTED) { if (mdev->agreed_pro_version < 94) { - peer = min_t(int, mdev->peer_max_bio_size, DRBD_MAX_SIZE_H80_PACKET); + peer = min(mdev->peer_max_bio_size, DRBD_MAX_SIZE_H80_PACKET); /* Correct old drbd (up to 8.3.7) if it believes it can do more than 32KiB */ } else if (mdev->agreed_pro_version == 94) peer = DRBD_MAX_SIZE_H80_PACKET; @@ -854,10 +861,10 @@ void drbd_reconsider_max_bio_size(struct drbd_conf *mdev) peer = DRBD_MAX_BIO_SIZE; } - new = min_t(int, local, peer); + new = min(local, peer); if (mdev->state.role == R_PRIMARY && new < now) - dev_err(DEV, "ASSERT FAILED new < now; (%d < %d)\n", new, now); + dev_err(DEV, "ASSERT FAILED new < now; (%u < %u)\n", new, now); if (new != now) dev_info(DEV, "max BIO size = %u\n", new); @@ -950,6 +957,14 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp * to realize a "hot spare" feature (not that I'd recommend that) */ wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt)); + /* make sure there is no leftover from previous force-detach attempts */ + clear_bit(FORCE_DETACH, &mdev->flags); + + /* and no leftover from previously aborted resync or verify, either */ + mdev->rs_total = 0; + mdev->rs_failed = 0; + atomic_set(&mdev->rs_pending_cnt, 0); + /* allocation not in the IO path, cqueue thread context */ nbc = kzalloc(sizeof(struct drbd_backing_dev), GFP_KERNEL); if (!nbc) { @@ -1345,6 +1360,7 @@ static int drbd_nl_detach(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp, } if (dt.detach_force) { + set_bit(FORCE_DETACH, &mdev->flags); drbd_force_state(mdev, NS(disk, D_FAILED)); reply->ret_code = SS_SUCCESS; goto out; @@ -1962,9 +1978,11 @@ static int drbd_nl_invalidate(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nl int retcode; /* If there is still bitmap IO pending, probably because of a previous - * resync just being finished, wait for it before requesting a new resync. */ + * resync just being finished, wait for it before requesting a new resync. + * Also wait for it's after_state_ch(). */ drbd_suspend_io(mdev); wait_event(mdev->misc_wait, !test_bit(BITMAP_IO, &mdev->flags)); + drbd_flush_workqueue(mdev); retcode = _drbd_request_state(mdev, NS(conn, C_STARTING_SYNC_T), CS_ORDERED); @@ -2003,9 +2021,11 @@ static int drbd_nl_invalidate_peer(struct drbd_conf *mdev, struct drbd_nl_cfg_re int retcode; /* If there is still bitmap IO pending, probably because of a previous - * resync just being finished, wait for it before requesting a new resync. */ + * resync just being finished, wait for it before requesting a new resync. + * Also wait for it's after_state_ch(). */ drbd_suspend_io(mdev); wait_event(mdev->misc_wait, !test_bit(BITMAP_IO, &mdev->flags)); + drbd_flush_workqueue(mdev); retcode = _drbd_request_state(mdev, NS(conn, C_STARTING_SYNC_S), CS_ORDERED); diff --git a/drivers/block/drbd/drbd_proc.c b/drivers/block/drbd/drbd_proc.c index 869bada2ed06838a656d431584afde516a9cd115..5496104f90b9efe295704a271c95b724a8245145 100644 --- a/drivers/block/drbd/drbd_proc.c +++ b/drivers/block/drbd/drbd_proc.c @@ -245,6 +245,9 @@ static int drbd_seq_show(struct seq_file *seq, void *v) mdev->state.role == R_SECONDARY) { seq_printf(seq, "%2d: cs:Unconfigured\n", i); } else { + /* reset mdev->congestion_reason */ + bdi_rw_congested(&mdev->rq_queue->backing_dev_info); + seq_printf(seq, "%2d: cs:%s ro:%s/%s ds:%s/%s %c %c%c%c%c%c%c\n" " ns:%u nr:%u dw:%u dr:%u al:%u bm:%u " diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index ea4836e0ae9829e12206e482cc50b70678a3e4aa..c74ca2df7431f13553d366fd371d717b6ed1f56b 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -277,6 +277,9 @@ static void drbd_pp_free(struct drbd_conf *mdev, struct page *page, int is_net) atomic_t *a = is_net ? &mdev->pp_in_use_by_net : &mdev->pp_in_use; int i; + if (page == NULL) + return; + if (drbd_pp_vacant > (DRBD_MAX_BIO_SIZE/PAGE_SIZE)*minor_count) i = page_chain_free(page); else { @@ -316,7 +319,7 @@ struct drbd_epoch_entry *drbd_alloc_ee(struct drbd_conf *mdev, gfp_t gfp_mask) __must_hold(local) { struct drbd_epoch_entry *e; - struct page *page; + struct page *page = NULL; unsigned nr_pages = (data_size + PAGE_SIZE -1) >> PAGE_SHIFT; if (drbd_insert_fault(mdev, DRBD_FAULT_AL_EE)) @@ -329,9 +332,11 @@ struct drbd_epoch_entry *drbd_alloc_ee(struct drbd_conf *mdev, return NULL; } - page = drbd_pp_alloc(mdev, nr_pages, (gfp_mask & __GFP_WAIT)); - if (!page) - goto fail; + if (data_size) { + page = drbd_pp_alloc(mdev, nr_pages, (gfp_mask & __GFP_WAIT)); + if (!page) + goto fail; + } INIT_HLIST_NODE(&e->collision); e->epoch = NULL; @@ -1270,7 +1275,6 @@ read_in_block(struct drbd_conf *mdev, u64 id, sector_t sector, int data_size) __ data_size -= dgs; - ERR_IF(data_size == 0) return NULL; ERR_IF(data_size & 0x1ff) return NULL; ERR_IF(data_size > DRBD_MAX_BIO_SIZE) return NULL; @@ -1291,6 +1295,9 @@ read_in_block(struct drbd_conf *mdev, u64 id, sector_t sector, int data_size) __ if (!e) return NULL; + if (!data_size) + return e; + ds = data_size; page = e->pages; page_chain_for_each(page) { @@ -1715,6 +1722,10 @@ static int receive_Data(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned dp_flags = be32_to_cpu(p->dp_flags); rw |= wire_flags_to_bio(mdev, dp_flags); + if (e->pages == NULL) { + D_ASSERT(e->size == 0); + D_ASSERT(dp_flags & DP_FLUSH); + } if (dp_flags & DP_MAY_SET_IN_SYNC) e->flags |= EE_MAY_SET_IN_SYNC; @@ -3801,11 +3812,18 @@ void drbd_free_tl_hash(struct drbd_conf *mdev) mdev->ee_hash = NULL; mdev->ee_hash_s = 0; - /* paranoia code */ - for (h = mdev->tl_hash; h < mdev->tl_hash + mdev->tl_hash_s; h++) - if (h->first) - dev_err(DEV, "ASSERT FAILED tl_hash[%u] == %p, expected NULL\n", - (int)(h - mdev->tl_hash), h->first); + /* We may not have had the chance to wait for all locally pending + * application requests. The hlist_add_fake() prevents access after + * free on master bio completion. */ + for (h = mdev->tl_hash; h < mdev->tl_hash + mdev->tl_hash_s; h++) { + struct drbd_request *req; + struct hlist_node *pos, *n; + hlist_for_each_entry_safe(req, pos, n, h, collision) { + hlist_del_init(&req->collision); + hlist_add_fake(&req->collision); + } + } + kfree(mdev->tl_hash); mdev->tl_hash = NULL; mdev->tl_hash_s = 0; diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index 8e93a6ac9bb65e3497f53c92723a67429ffdf946..01b2ac641c7babe119f98dac7596ff8a690402a8 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -455,7 +455,7 @@ int __req_mod(struct drbd_request *req, enum drbd_req_event what, req->rq_state |= RQ_LOCAL_COMPLETED; req->rq_state &= ~RQ_LOCAL_PENDING; - __drbd_chk_io_error(mdev, false); + __drbd_chk_io_error(mdev, DRBD_IO_ERROR); _req_may_be_done_not_susp(req, m); break; @@ -477,7 +477,7 @@ int __req_mod(struct drbd_request *req, enum drbd_req_event what, break; } - __drbd_chk_io_error(mdev, false); + __drbd_chk_io_error(mdev, DRBD_IO_ERROR); goto_queue_for_net_read: @@ -695,6 +695,12 @@ int __req_mod(struct drbd_request *req, enum drbd_req_event what, break; case resend: + /* Simply complete (local only) READs. */ + if (!(req->rq_state & RQ_WRITE) && !req->w.cb) { + _req_may_be_done(req, m); + break; + } + /* If RQ_NET_OK is already set, we got a P_WRITE_ACK or P_RECV_ACK before the connection loss (B&C only); only P_BARRIER_ACK was missing. Trowing them out of the TL here by pretending we got a BARRIER_ACK @@ -834,7 +840,15 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, uns req->private_bio = NULL; } if (rw == WRITE) { - remote = 1; + /* Need to replicate writes. Unless it is an empty flush, + * which is better mapped to a DRBD P_BARRIER packet, + * also for drbd wire protocol compatibility reasons. */ + if (unlikely(size == 0)) { + /* The only size==0 bios we expect are empty flushes. */ + D_ASSERT(bio->bi_rw & REQ_FLUSH); + remote = 0; + } else + remote = 1; } else { /* READ || READA */ if (local) { @@ -870,8 +884,11 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, uns * extent. This waits for any resync activity in the corresponding * resync extent to finish, and, if necessary, pulls in the target * extent into the activity log, which involves further disk io because - * of transactional on-disk meta data updates. */ - if (rw == WRITE && local && !test_bit(AL_SUSPENDED, &mdev->flags)) { + * of transactional on-disk meta data updates. + * Empty flushes don't need to go into the activity log, they can only + * flush data for pending writes which are already in there. */ + if (rw == WRITE && local && size + && !test_bit(AL_SUSPENDED, &mdev->flags)) { req->rq_state |= RQ_IN_ACT_LOG; drbd_al_begin_io(mdev, sector); } @@ -994,7 +1011,10 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, uns if (rw == WRITE && _req_conflicts(req)) goto fail_conflicting; - list_add_tail(&req->tl_requests, &mdev->newest_tle->requests); + /* no point in adding empty flushes to the transfer log, + * they are mapped to drbd barriers already. */ + if (likely(size!=0)) + list_add_tail(&req->tl_requests, &mdev->newest_tle->requests); /* NOTE remote first: to get the concurrent write detection right, * we must register the request before start of local IO. */ @@ -1014,6 +1034,14 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, uns mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96) maybe_pull_ahead(mdev); + /* If this was a flush, queue a drbd barrier/start a new epoch. + * Unless the current epoch was empty anyways, or we are not currently + * replicating, in which case there is no point. */ + if (unlikely(bio->bi_rw & REQ_FLUSH) + && mdev->newest_tle->n_writes + && drbd_should_do_remote(mdev->state)) + queue_barrier(mdev); + spin_unlock_irq(&mdev->req_lock); kfree(b); /* if someone else has beaten us to it... */ @@ -1111,13 +1139,12 @@ void drbd_make_request(struct request_queue *q, struct bio *bio) /* * what we "blindly" assume: */ - D_ASSERT(bio->bi_size > 0); D_ASSERT((bio->bi_size & 0x1ff) == 0); /* to make some things easier, force alignment of requests within the * granularity of our hash tables */ s_enr = bio->bi_sector >> HT_SHIFT; - e_enr = (bio->bi_sector+(bio->bi_size>>9)-1) >> HT_SHIFT; + e_enr = bio->bi_size ? (bio->bi_sector+(bio->bi_size>>9)-1) >> HT_SHIFT : s_enr; if (likely(s_enr == e_enr)) { do { @@ -1275,7 +1302,7 @@ void request_timer_fn(unsigned long data) time_after(now, req->start_time + dt) && !time_in_range(now, mdev->last_reattach_jif, mdev->last_reattach_jif + dt)) { dev_warn(DEV, "Local backing device failed to meet the disk-timeout\n"); - __drbd_chk_io_error(mdev, 1); + __drbd_chk_io_error(mdev, DRBD_FORCE_DETACH); } nt = (time_after(now, req->start_time + et) ? now : req->start_time) + et; spin_unlock_irq(&mdev->req_lock); diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index 620c70ff223118e6f259a200512203f5010e2cda..6bce2cc179d4112980673b1b9d82ae91d70d390f 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -111,7 +111,7 @@ void drbd_endio_read_sec_final(struct drbd_epoch_entry *e) __releases(local) if (list_empty(&mdev->read_ee)) wake_up(&mdev->ee_wait); if (test_bit(__EE_WAS_ERROR, &e->flags)) - __drbd_chk_io_error(mdev, false); + __drbd_chk_io_error(mdev, DRBD_IO_ERROR); spin_unlock_irqrestore(&mdev->req_lock, flags); drbd_queue_work(&mdev->data.work, &e->w); @@ -154,7 +154,7 @@ static void drbd_endio_write_sec_final(struct drbd_epoch_entry *e) __releases(lo : list_empty(&mdev->active_ee); if (test_bit(__EE_WAS_ERROR, &e->flags)) - __drbd_chk_io_error(mdev, false); + __drbd_chk_io_error(mdev, DRBD_IO_ERROR); spin_unlock_irqrestore(&mdev->req_lock, flags); if (is_syncer_req) @@ -1501,14 +1501,6 @@ void drbd_start_resync(struct drbd_conf *mdev, enum drbd_conns side) return; } - if (mdev->state.conn < C_AHEAD) { - /* In case a previous resync run was aborted by an IO error/detach on the peer. */ - drbd_rs_cancel_all(mdev); - /* This should be done when we abort the resync. We definitely do not - want to have this for connections going back and forth between - Ahead/Behind and SyncSource/SyncTarget */ - } - if (side == C_SYNC_TARGET) { /* Since application IO was locked out during C_WF_BITMAP_T and C_WF_SYNC_UUID we are still unmodified. Before going to C_SYNC_TARGET diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 553f43a90953cab40f421658ecb37fa9c20c8c54..a7d6347aaa7913b2a029014a95a2558d8360597e 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -191,6 +191,7 @@ static int print_unex = 1; #include #include #include +#include /* * PS/2 floppies have much slower step rates than regular floppies. @@ -2516,8 +2517,7 @@ static int make_raw_rw_request(void) set_fdc((long)current_req->rq_disk->private_data); raw_cmd = &default_raw_cmd; - raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_DISK | FD_RAW_NEED_DISK | - FD_RAW_NEED_SEEK; + raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK; raw_cmd->cmd_count = NR_RW; if (rq_data_dir(current_req) == READ) { raw_cmd->flags |= FD_RAW_READ; @@ -4123,7 +4123,7 @@ static struct kobject *floppy_find(dev_t dev, int *part, void *data) return get_disk(disks[drive]); } -static int __init floppy_init(void) +static int __init do_floppy_init(void) { int i, unit, drive; int err, dr; @@ -4338,6 +4338,24 @@ static int __init floppy_init(void) return err; } +#ifndef MODULE +static __init void floppy_async_init(void *data, async_cookie_t cookie) +{ + do_floppy_init(); +} +#endif + +static int __init floppy_init(void) +{ +#ifdef MODULE + return do_floppy_init(); +#else + /* Don't hold up the bootup by the floppy initialization */ + async_schedule(floppy_async_init, NULL); + return 0; +#endif +} + static const struct io_region { int offset; int size; diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index a8fddeb3d638ebcdf9a0191beda816d8f1338ccd..f946d31d6917e00aa0637df5d21cef35ebf82845 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -1148,11 +1148,15 @@ static bool mtip_pause_ncq(struct mtip_port *port, reply = port->rxfis + RX_FIS_D2H_REG; task_file_data = readl(port->mmio+PORT_TFDATA); - if ((task_file_data & 1) || (fis->command == ATA_CMD_SEC_ERASE_UNIT)) + if (fis->command == ATA_CMD_SEC_ERASE_UNIT) + clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); + + if ((task_file_data & 1)) return false; if (fis->command == ATA_CMD_SEC_ERASE_PREP) { set_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); + set_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); port->ic_pause_timer = jiffies; return true; } else if ((fis->command == ATA_CMD_DOWNLOAD_MICRO) && @@ -1900,7 +1904,7 @@ static int exec_drive_command(struct mtip_port *port, u8 *command, int rv = 0, xfer_sz = command[3]; if (xfer_sz) { - if (user_buffer) + if (!user_buffer) return -EFAULT; buf = dmam_alloc_coherent(&port->dd->pdev->dev, @@ -2043,7 +2047,7 @@ static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout) *timeout = 240000; /* 4 minutes */ break; case ATA_CMD_STANDBYNOW1: - *timeout = 10000; /* 10 seconds */ + *timeout = 120000; /* 2 minutes */ break; case 0xF7: case 0xFA: @@ -2588,9 +2592,6 @@ static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf, if (!len || size) return 0; - if (size < 0) - return -EINVAL; - size += sprintf(&buf[size], "H/ S ACTive : [ 0x"); for (n = dd->slot_groups-1; n >= 0; n--) @@ -2660,9 +2661,6 @@ static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf, if (!len || size) return 0; - if (size < 0) - return -EINVAL; - size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n", dd->port->flags); size += sprintf(&buf[size], "Flag-dd : [ %08lX ]\n", @@ -3214,8 +3212,8 @@ static int mtip_hw_init(struct driver_data *dd) "Unable to check write protect progress\n"); else dev_info(&dd->pdev->dev, - "Write protect progress: %d%% (%d blocks)\n", - attr242.cur, attr242.data); + "Write protect progress: %u%% (%u blocks)\n", + attr242.cur, le32_to_cpu(attr242.data)); return rv; out3: @@ -3619,6 +3617,10 @@ static void mtip_make_request(struct request_queue *queue, struct bio *bio) bio_endio(bio, -ENODATA); return; } + if (unlikely(test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag))) { + bio_endio(bio, -ENODATA); + return; + } } if (unlikely(!bio_has_data(bio))) { @@ -4168,7 +4170,13 @@ static void mtip_pci_shutdown(struct pci_dev *pdev) /* Table of device ids supported by this driver. */ static DEFINE_PCI_DEVICE_TABLE(mtip_pci_tbl) = { - { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320H_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320M_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320S_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P325M_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420H_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420M_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P425M_DEVICE_ID) }, { 0 } }; @@ -4199,12 +4207,12 @@ static int __init mtip_init(void) { int error; - printk(KERN_INFO MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n"); + pr_info(MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n"); /* Allocate a major block device number to use with this driver. */ error = register_blkdev(0, MTIP_DRV_NAME); if (error <= 0) { - printk(KERN_ERR "Unable to register block device (%d)\n", + pr_err("Unable to register block device (%d)\n", error); return -EBUSY; } @@ -4213,7 +4221,7 @@ static int __init mtip_init(void) if (!dfs_parent) { dfs_parent = debugfs_create_dir("rssd", NULL); if (IS_ERR_OR_NULL(dfs_parent)) { - printk(KERN_WARNING "Error creating debugfs parent\n"); + pr_warn("Error creating debugfs parent\n"); dfs_parent = NULL; } } diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index f51fc23d17bb0e0025c74ac9f495007dcbc8b784..18627a1d04c59eff34f7cdd2313555b10a75b283 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -76,7 +76,13 @@ /* Micron Vendor ID & P320x SSD Device ID */ #define PCI_VENDOR_ID_MICRON 0x1344 -#define P320_DEVICE_ID 0x5150 +#define P320H_DEVICE_ID 0x5150 +#define P320M_DEVICE_ID 0x5151 +#define P320S_DEVICE_ID 0x5152 +#define P325M_DEVICE_ID 0x5153 +#define P420H_DEVICE_ID 0x5160 +#define P420M_DEVICE_ID 0x5161 +#define P425M_DEVICE_ID 0x5163 /* Driver name and version strings */ #define MTIP_DRV_NAME "mtip32xx" @@ -131,10 +137,12 @@ enum { MTIP_PF_SVC_THD_STOP_BIT = 8, /* below are bit numbers in 'dd_flag' defined in driver_data */ + MTIP_DDF_SEC_LOCK_BIT = 0, MTIP_DDF_REMOVE_PENDING_BIT = 1, MTIP_DDF_OVER_TEMP_BIT = 2, MTIP_DDF_WRITE_PROTECT_BIT = 3, MTIP_DDF_STOP_IO = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) | \ + (1 << MTIP_DDF_SEC_LOCK_BIT) | \ (1 << MTIP_DDF_OVER_TEMP_BIT) | \ (1 << MTIP_DDF_WRITE_PROTECT_BIT)), diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 061427a75d375a5ed0655bdac8422e668a252a5e..0c03411c59eb8cba0f744e72aed93342dc9cace8 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -154,6 +154,7 @@ static int sock_xmit(struct nbd_device *nbd, int send, void *buf, int size, struct msghdr msg; struct kvec iov; sigset_t blocked, oldset; + unsigned long pflags = current->flags; if (unlikely(!sock)) { dev_err(disk_to_dev(nbd->disk), @@ -167,8 +168,9 @@ static int sock_xmit(struct nbd_device *nbd, int send, void *buf, int size, siginitsetinv(&blocked, sigmask(SIGKILL)); sigprocmask(SIG_SETMASK, &blocked, &oldset); + current->flags |= PF_MEMALLOC; do { - sock->sk->sk_allocation = GFP_NOIO; + sock->sk->sk_allocation = GFP_NOIO | __GFP_MEMALLOC; iov.iov_base = buf; iov.iov_len = size; msg.msg_name = NULL; @@ -214,6 +216,7 @@ static int sock_xmit(struct nbd_device *nbd, int send, void *buf, int size, } while (size > 0); sigprocmask(SIG_SETMASK, &oldset, NULL); + tsk_restore_flags(current, pflags, PF_MEMALLOC); return result; } @@ -405,6 +408,7 @@ static int nbd_do_it(struct nbd_device *nbd) BUG_ON(nbd->magic != NBD_MAGIC); + sk_set_memalloc(nbd->sock->sk); nbd->pid = task_pid_nr(current); ret = device_create_file(disk_to_dev(nbd->disk), &pid_attr); if (ret) { @@ -445,6 +449,14 @@ static void nbd_clear_que(struct nbd_device *nbd) req->errors++; nbd_end_request(req); } + + while (!list_empty(&nbd->waiting_queue)) { + req = list_entry(nbd->waiting_queue.next, struct request, + queuelist); + list_del_init(&req->queuelist); + req->errors++; + nbd_end_request(req); + } } @@ -481,7 +493,7 @@ static void nbd_handle_req(struct nbd_device *nbd, struct request *req) nbd_end_request(req); } else { spin_lock(&nbd->queue_lock); - list_add(&req->queuelist, &nbd->queue_head); + list_add_tail(&req->queuelist, &nbd->queue_head); spin_unlock(&nbd->queue_lock); } @@ -594,6 +606,7 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, nbd->file = NULL; nbd_clear_que(nbd); BUG_ON(!list_empty(&nbd->queue_head)); + BUG_ON(!list_empty(&nbd->waiting_queue)); if (file) fput(file); return 0; diff --git a/drivers/block/nvme.c b/drivers/block/nvme.c index 38a2d0631882ccd192ee475fc3b0f7a2e3b9d0cb..ad16c68c86451bd80dc18bbb7673e14d4611d947 100644 --- a/drivers/block/nvme.c +++ b/drivers/block/nvme.c @@ -79,6 +79,7 @@ struct nvme_dev { char serial[20]; char model[40]; char firmware_rev[8]; + u32 max_hw_sectors; }; /* @@ -835,15 +836,15 @@ static int nvme_identify(struct nvme_dev *dev, unsigned nsid, unsigned cns, } static int nvme_get_features(struct nvme_dev *dev, unsigned fid, - unsigned dword11, dma_addr_t dma_addr) + unsigned nsid, dma_addr_t dma_addr) { struct nvme_command c; memset(&c, 0, sizeof(c)); c.features.opcode = nvme_admin_get_features; + c.features.nsid = cpu_to_le32(nsid); c.features.prp1 = cpu_to_le64(dma_addr); c.features.fid = cpu_to_le32(fid); - c.features.dword11 = cpu_to_le32(dword11); return nvme_submit_admin_cmd(dev, &c, NULL); } @@ -862,11 +863,51 @@ static int nvme_set_features(struct nvme_dev *dev, unsigned fid, return nvme_submit_admin_cmd(dev, &c, result); } +/** + * nvme_cancel_ios - Cancel outstanding I/Os + * @queue: The queue to cancel I/Os on + * @timeout: True to only cancel I/Os which have timed out + */ +static void nvme_cancel_ios(struct nvme_queue *nvmeq, bool timeout) +{ + int depth = nvmeq->q_depth - 1; + struct nvme_cmd_info *info = nvme_cmd_info(nvmeq); + unsigned long now = jiffies; + int cmdid; + + for_each_set_bit(cmdid, nvmeq->cmdid_data, depth) { + void *ctx; + nvme_completion_fn fn; + static struct nvme_completion cqe = { + .status = cpu_to_le16(NVME_SC_ABORT_REQ) << 1, + }; + + if (timeout && !time_after(now, info[cmdid].timeout)) + continue; + dev_warn(nvmeq->q_dmadev, "Cancelling I/O %d\n", cmdid); + ctx = cancel_cmdid(nvmeq, cmdid, &fn); + fn(nvmeq->dev, ctx, &cqe); + } +} + +static void nvme_free_queue_mem(struct nvme_queue *nvmeq) +{ + dma_free_coherent(nvmeq->q_dmadev, CQ_SIZE(nvmeq->q_depth), + (void *)nvmeq->cqes, nvmeq->cq_dma_addr); + dma_free_coherent(nvmeq->q_dmadev, SQ_SIZE(nvmeq->q_depth), + nvmeq->sq_cmds, nvmeq->sq_dma_addr); + kfree(nvmeq); +} + static void nvme_free_queue(struct nvme_dev *dev, int qid) { struct nvme_queue *nvmeq = dev->queues[qid]; int vector = dev->entry[nvmeq->cq_vector].vector; + spin_lock_irq(&nvmeq->q_lock); + nvme_cancel_ios(nvmeq, false); + spin_unlock_irq(&nvmeq->q_lock); + irq_set_affinity_hint(vector, NULL); free_irq(vector, nvmeq); @@ -876,18 +917,15 @@ static void nvme_free_queue(struct nvme_dev *dev, int qid) adapter_delete_cq(dev, qid); } - dma_free_coherent(nvmeq->q_dmadev, CQ_SIZE(nvmeq->q_depth), - (void *)nvmeq->cqes, nvmeq->cq_dma_addr); - dma_free_coherent(nvmeq->q_dmadev, SQ_SIZE(nvmeq->q_depth), - nvmeq->sq_cmds, nvmeq->sq_dma_addr); - kfree(nvmeq); + nvme_free_queue_mem(nvmeq); } static struct nvme_queue *nvme_alloc_queue(struct nvme_dev *dev, int qid, int depth, int vector) { struct device *dmadev = &dev->pci_dev->dev; - unsigned extra = (depth / 8) + (depth * sizeof(struct nvme_cmd_info)); + unsigned extra = DIV_ROUND_UP(depth, 8) + (depth * + sizeof(struct nvme_cmd_info)); struct nvme_queue *nvmeq = kzalloc(sizeof(*nvmeq) + extra, GFP_KERNEL); if (!nvmeq) return NULL; @@ -975,7 +1013,7 @@ static __devinit struct nvme_queue *nvme_create_queue(struct nvme_dev *dev, static int __devinit nvme_configure_admin_queue(struct nvme_dev *dev) { - int result; + int result = 0; u32 aqa; u64 cap; unsigned long timeout; @@ -1005,17 +1043,22 @@ static int __devinit nvme_configure_admin_queue(struct nvme_dev *dev) timeout = ((NVME_CAP_TIMEOUT(cap) + 1) * HZ / 2) + jiffies; dev->db_stride = NVME_CAP_STRIDE(cap); - while (!(readl(&dev->bar->csts) & NVME_CSTS_RDY)) { + while (!result && !(readl(&dev->bar->csts) & NVME_CSTS_RDY)) { msleep(100); if (fatal_signal_pending(current)) - return -EINTR; + result = -EINTR; if (time_after(jiffies, timeout)) { dev_err(&dev->pci_dev->dev, "Device not ready; aborting initialisation\n"); - return -ENODEV; + result = -ENODEV; } } + if (result) { + nvme_free_queue_mem(nvmeq); + return result; + } + result = queue_request_irq(dev, nvmeq, "nvme admin"); dev->queues[0] = nvmeq; return result; @@ -1037,6 +1080,8 @@ static struct nvme_iod *nvme_map_user_pages(struct nvme_dev *dev, int write, offset = offset_in_page(addr); count = DIV_ROUND_UP(offset + length, PAGE_SIZE); pages = kcalloc(count, sizeof(*pages), GFP_KERNEL); + if (!pages) + return ERR_PTR(-ENOMEM); err = get_user_pages_fast(addr, count, 1, pages); if (err < count) { @@ -1146,14 +1191,13 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio) return status; } -static int nvme_user_admin_cmd(struct nvme_ns *ns, +static int nvme_user_admin_cmd(struct nvme_dev *dev, struct nvme_admin_cmd __user *ucmd) { - struct nvme_dev *dev = ns->dev; struct nvme_admin_cmd cmd; struct nvme_command c; int status, length; - struct nvme_iod *iod; + struct nvme_iod *uninitialized_var(iod); if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -1204,7 +1248,7 @@ static int nvme_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, case NVME_IOCTL_ID: return ns->ns_id; case NVME_IOCTL_ADMIN_CMD: - return nvme_user_admin_cmd(ns, (void __user *)arg); + return nvme_user_admin_cmd(ns->dev, (void __user *)arg); case NVME_IOCTL_SUBMIT_IO: return nvme_submit_io(ns, (void __user *)arg); default: @@ -1218,26 +1262,6 @@ static const struct block_device_operations nvme_fops = { .compat_ioctl = nvme_ioctl, }; -static void nvme_timeout_ios(struct nvme_queue *nvmeq) -{ - int depth = nvmeq->q_depth - 1; - struct nvme_cmd_info *info = nvme_cmd_info(nvmeq); - unsigned long now = jiffies; - int cmdid; - - for_each_set_bit(cmdid, nvmeq->cmdid_data, depth) { - void *ctx; - nvme_completion_fn fn; - static struct nvme_completion cqe = { .status = cpu_to_le16(NVME_SC_ABORT_REQ) << 1, }; - - if (!time_after(now, info[cmdid].timeout)) - continue; - dev_warn(nvmeq->q_dmadev, "Timing out I/O %d\n", cmdid); - ctx = cancel_cmdid(nvmeq, cmdid, &fn); - fn(nvmeq->dev, ctx, &cqe); - } -} - static void nvme_resubmit_bios(struct nvme_queue *nvmeq) { while (bio_list_peek(&nvmeq->sq_cong)) { @@ -1269,7 +1293,7 @@ static int nvme_kthread(void *data) spin_lock_irq(&nvmeq->q_lock); if (nvme_process_cq(nvmeq)) printk("process_cq did something\n"); - nvme_timeout_ios(nvmeq); + nvme_cancel_ios(nvmeq, true); nvme_resubmit_bios(nvmeq); spin_unlock_irq(&nvmeq->q_lock); } @@ -1339,6 +1363,9 @@ static struct nvme_ns *nvme_alloc_ns(struct nvme_dev *dev, int nsid, ns->disk = disk; lbaf = id->flbas & 0xf; ns->lba_shift = id->lbaf[lbaf].ds; + blk_queue_logical_block_size(ns->queue, 1 << ns->lba_shift); + if (dev->max_hw_sectors) + blk_queue_max_hw_sectors(ns->queue, dev->max_hw_sectors); disk->major = nvme_major; disk->minors = NVME_MINORS; @@ -1383,7 +1410,7 @@ static int set_queue_count(struct nvme_dev *dev, int count) static int __devinit nvme_setup_io_queues(struct nvme_dev *dev) { - int result, cpu, i, nr_io_queues, db_bar_size; + int result, cpu, i, nr_io_queues, db_bar_size, q_depth; nr_io_queues = num_online_cpus(); result = set_queue_count(dev, nr_io_queues); @@ -1429,9 +1456,10 @@ static int __devinit nvme_setup_io_queues(struct nvme_dev *dev) cpu = cpumask_next(cpu, cpu_online_mask); } + q_depth = min_t(int, NVME_CAP_MQES(readq(&dev->bar->cap)) + 1, + NVME_Q_DEPTH); for (i = 0; i < nr_io_queues; i++) { - dev->queues[i + 1] = nvme_create_queue(dev, i + 1, - NVME_Q_DEPTH, i); + dev->queues[i + 1] = nvme_create_queue(dev, i + 1, q_depth, i); if (IS_ERR(dev->queues[i + 1])) return PTR_ERR(dev->queues[i + 1]); dev->queue_count++; @@ -1480,6 +1508,10 @@ static int __devinit nvme_dev_add(struct nvme_dev *dev) memcpy(dev->serial, ctrl->sn, sizeof(ctrl->sn)); memcpy(dev->model, ctrl->mn, sizeof(ctrl->mn)); memcpy(dev->firmware_rev, ctrl->fr, sizeof(ctrl->fr)); + if (ctrl->mdts) { + int shift = NVME_CAP_MPSMIN(readq(&dev->bar->cap)) + 12; + dev->max_hw_sectors = 1 << (ctrl->mdts + shift - 9); + } id_ns = mem; for (i = 1; i <= nn; i++) { @@ -1523,8 +1555,6 @@ static int nvme_dev_remove(struct nvme_dev *dev) list_del(&dev->node); spin_unlock(&dev_list_lock); - /* TODO: wait all I/O finished or cancel them */ - list_for_each_entry_safe(ns, next, &dev->namespaces, list) { list_del(&ns->list); del_gendisk(ns->disk); @@ -1560,15 +1590,33 @@ static void nvme_release_prp_pools(struct nvme_dev *dev) dma_pool_destroy(dev->prp_small_pool); } -/* XXX: Use an ida or something to let remove / add work correctly */ -static void nvme_set_instance(struct nvme_dev *dev) +static DEFINE_IDA(nvme_instance_ida); + +static int nvme_set_instance(struct nvme_dev *dev) { - static int instance; - dev->instance = instance++; + int instance, error; + + do { + if (!ida_pre_get(&nvme_instance_ida, GFP_KERNEL)) + return -ENODEV; + + spin_lock(&dev_list_lock); + error = ida_get_new(&nvme_instance_ida, &instance); + spin_unlock(&dev_list_lock); + } while (error == -EAGAIN); + + if (error) + return -ENODEV; + + dev->instance = instance; + return 0; } static void nvme_release_instance(struct nvme_dev *dev) { + spin_lock(&dev_list_lock); + ida_remove(&nvme_instance_ida, dev->instance); + spin_unlock(&dev_list_lock); } static int __devinit nvme_probe(struct pci_dev *pdev, @@ -1601,7 +1649,10 @@ static int __devinit nvme_probe(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); - nvme_set_instance(dev); + result = nvme_set_instance(dev); + if (result) + goto disable; + dev->entry[0].vector = pdev->irq; result = nvme_setup_prp_pools(dev); @@ -1704,15 +1755,17 @@ static struct pci_driver nvme_driver = { static int __init nvme_init(void) { - int result = -EBUSY; + int result; nvme_thread = kthread_run(nvme_kthread, NULL, "nvme"); if (IS_ERR(nvme_thread)) return PTR_ERR(nvme_thread); - nvme_major = register_blkdev(nvme_major, "nvme"); - if (nvme_major <= 0) + result = register_blkdev(nvme_major, "nvme"); + if (result < 0) goto kill_kthread; + else if (result > 0) + nvme_major = result; result = pci_register_driver(&nvme_driver); if (result) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 9917943a3572ef577ac7a511ef375d11dae08350..54a55f03115df1df8dddb45e354eb8246336e56b 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -246,13 +246,12 @@ static int rbd_open(struct block_device *bdev, fmode_t mode) { struct rbd_device *rbd_dev = bdev->bd_disk->private_data; - rbd_get_dev(rbd_dev); - - set_device_ro(bdev, rbd_dev->read_only); - if ((mode & FMODE_WRITE) && rbd_dev->read_only) return -EROFS; + rbd_get_dev(rbd_dev); + set_device_ro(bdev, rbd_dev->read_only); + return 0; } diff --git a/drivers/block/umem.c b/drivers/block/umem.c index 9a72277a31df0cb131f879bb8a1503a65a57b7cc..eb0d8216f557434b36e6fbc809b75c33bbbc1292 100644 --- a/drivers/block/umem.c +++ b/drivers/block/umem.c @@ -513,42 +513,19 @@ static void process_page(unsigned long data) } } -struct mm_plug_cb { - struct blk_plug_cb cb; - struct cardinfo *card; -}; - -static void mm_unplug(struct blk_plug_cb *cb) +static void mm_unplug(struct blk_plug_cb *cb, bool from_schedule) { - struct mm_plug_cb *mmcb = container_of(cb, struct mm_plug_cb, cb); + struct cardinfo *card = cb->data; - spin_lock_irq(&mmcb->card->lock); - activate(mmcb->card); - spin_unlock_irq(&mmcb->card->lock); - kfree(mmcb); + spin_lock_irq(&card->lock); + activate(card); + spin_unlock_irq(&card->lock); + kfree(cb); } static int mm_check_plugged(struct cardinfo *card) { - struct blk_plug *plug = current->plug; - struct mm_plug_cb *mmcb; - - if (!plug) - return 0; - - list_for_each_entry(mmcb, &plug->cb_list, cb.list) { - if (mmcb->cb.callback == mm_unplug && mmcb->card == card) - return 1; - } - /* Not currently on the callback list */ - mmcb = kmalloc(sizeof(*mmcb), GFP_ATOMIC); - if (!mmcb) - return 0; - - mmcb->card = card; - mmcb->cb.callback = mm_unplug; - list_add(&mmcb->cb.list, &plug->cb_list); - return 1; + return !!blk_check_plugged(mm_unplug, card, sizeof(struct blk_plug_cb)); } static void mm_make_request(struct request_queue *q, struct bio *bio) diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index 73f196ca713f20e037e22adccba64d0e00c936b1..c6decb901e5e16f4ba09ccef7db33675aeecb189 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -337,7 +337,7 @@ static void xen_blkbk_unmap(struct pending_req *req) invcount++; } - ret = gnttab_unmap_refs(unmap, pages, invcount, false); + ret = gnttab_unmap_refs(unmap, NULL, pages, invcount); BUG_ON(ret); } diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index e4fb3374dcd2aaa6d0f834cd9394564a3c022a38..2c2d2e5c15974c30755fd61715a189029dff7cd6 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -888,9 +888,8 @@ static int setup_blkring(struct xenbus_device *dev, if (err) goto fail; - err = bind_evtchn_to_irqhandler(info->evtchn, - blkif_interrupt, - IRQF_SAMPLE_RANDOM, "blkif", info); + err = bind_evtchn_to_irqhandler(info->evtchn, blkif_interrupt, 0, + "blkif", info); if (err <= 0) { xenbus_dev_fatal(dev, err, "bind_evtchn_to_irqhandler failed"); diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 10308cd8a7ed2276f146c86c752383de5517464a..fc2de5528dcc94eb65537baa17b78048a5002827 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -79,12 +79,14 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, + { USB_DEVICE(0x0489, 0xe057) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C) }, + { USB_DEVICE(0x0489, 0xE036) }, { } /* Terminating entry */ }; @@ -104,9 +106,11 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index e272214110365510fcfcbb6f6f3f75778f65ed46..654e248763efb98024bd81b57118cd2ad1d77cdf 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -52,6 +52,9 @@ static struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, + /* Apple-specific (Broadcom) devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) }, + /* Broadcom SoftSailing reporting vendor specific */ { USB_DEVICE(0x0a5c, 0x21e1) }, @@ -94,15 +97,14 @@ static struct usb_device_id btusb_table[] = { /* Broadcom BCM20702A0 */ { USB_DEVICE(0x0489, 0xe042) }, - { USB_DEVICE(0x0a5c, 0x21e3) }, - { USB_DEVICE(0x0a5c, 0x21e6) }, - { USB_DEVICE(0x0a5c, 0x21e8) }, - { USB_DEVICE(0x0a5c, 0x21f3) }, { USB_DEVICE(0x413c, 0x8197) }, /* Foxconn - Hon Hai */ { USB_DEVICE(0x0489, 0xe033) }, + /*Broadcom devices with vendor specific id */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }, + { } /* Terminating entry */ }; @@ -133,12 +135,14 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 }, /* Broadcom BCM2035 */ { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h index 57226424690cb1f05ebfa560f776aa8adf967c55..6ec0fff79bc2f6dfce8eb2be78019dca56bb18e6 100644 --- a/drivers/char/agp/intel-agp.h +++ b/drivers/char/agp/intel-agp.h @@ -64,6 +64,7 @@ #define I830_PTE_SYSTEM_CACHED 0x00000006 /* GT PTE cache control fields */ #define GEN6_PTE_UNCACHED 0x00000002 +#define HSW_PTE_UNCACHED 0x00000000 #define GEN6_PTE_LLC 0x00000004 #define GEN6_PTE_LLC_MLC 0x00000006 #define GEN6_PTE_GFDT 0x00000008 @@ -239,16 +240,45 @@ #define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT2_IG 0x016A #define PCI_DEVICE_ID_INTEL_VALLEYVIEW_HB 0x0F00 /* VLV1 */ #define PCI_DEVICE_ID_INTEL_VALLEYVIEW_IG 0x0F30 -#define PCI_DEVICE_ID_INTEL_HASWELL_HB 0x0400 /* Desktop */ +#define PCI_DEVICE_ID_INTEL_HASWELL_HB 0x0400 /* Desktop */ #define PCI_DEVICE_ID_INTEL_HASWELL_D_GT1_IG 0x0402 #define PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_IG 0x0412 -#define PCI_DEVICE_ID_INTEL_HASWELL_M_HB 0x0404 /* Mobile */ +#define PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_PLUS_IG 0x0422 +#define PCI_DEVICE_ID_INTEL_HASWELL_M_HB 0x0404 /* Mobile */ #define PCI_DEVICE_ID_INTEL_HASWELL_M_GT1_IG 0x0406 #define PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_IG 0x0416 -#define PCI_DEVICE_ID_INTEL_HASWELL_S_HB 0x0408 /* Server */ +#define PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_PLUS_IG 0x0426 +#define PCI_DEVICE_ID_INTEL_HASWELL_S_HB 0x0408 /* Server */ #define PCI_DEVICE_ID_INTEL_HASWELL_S_GT1_IG 0x040a #define PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_IG 0x041a -#define PCI_DEVICE_ID_INTEL_HASWELL_SDV 0x0c16 /* SDV */ -#define PCI_DEVICE_ID_INTEL_HASWELL_E_HB 0x0c04 +#define PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_PLUS_IG 0x042a +#define PCI_DEVICE_ID_INTEL_HASWELL_E_HB 0x0c04 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT1_IG 0x0C02 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT2_IG 0x0C12 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT2_PLUS_IG 0x0C22 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT1_IG 0x0C06 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT2_IG 0x0C16 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT2_PLUS_IG 0x0C26 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT1_IG 0x0C0A +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT2_IG 0x0C1A +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT2_PLUS_IG 0x0C2A +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT1_IG 0x0A02 +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT2_IG 0x0A12 +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT2_PLUS_IG 0x0A22 +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT1_IG 0x0A06 +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT2_IG 0x0A16 +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT2_PLUS_IG 0x0A26 +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT1_IG 0x0A0A +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT2_IG 0x0A1A +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT2_PLUS_IG 0x0A2A +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT1_IG 0x0D12 +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT2_IG 0x0D22 +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT2_PLUS_IG 0x0D32 +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT1_IG 0x0D16 +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT2_IG 0x0D26 +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT2_PLUS_IG 0x0D36 +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT1_IG 0x0D1A +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT2_IG 0x0D2A +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT2_PLUS_IG 0x0D3A #endif diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 9ed92ef5829b8f54bb318e0b6510e59c2b40e939..58e32f7c322956209bd3a63ce16f5ce16135c59b 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1156,6 +1156,30 @@ static bool gen6_check_flags(unsigned int flags) return true; } +static void haswell_write_entry(dma_addr_t addr, unsigned int entry, + unsigned int flags) +{ + unsigned int type_mask = flags & ~AGP_USER_CACHED_MEMORY_GFDT; + unsigned int gfdt = flags & AGP_USER_CACHED_MEMORY_GFDT; + u32 pte_flags; + + if (type_mask == AGP_USER_MEMORY) + pte_flags = HSW_PTE_UNCACHED | I810_PTE_VALID; + else if (type_mask == AGP_USER_CACHED_MEMORY_LLC_MLC) { + pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID; + if (gfdt) + pte_flags |= GEN6_PTE_GFDT; + } else { /* set 'normal'/'cached' to LLC by default */ + pte_flags = GEN6_PTE_LLC | I810_PTE_VALID; + if (gfdt) + pte_flags |= GEN6_PTE_GFDT; + } + + /* gen6 has bit11-4 for physical addr bit39-32 */ + addr |= (addr >> 28) & 0xff0; + writel(addr | pte_flags, intel_private.gtt + entry); +} + static void gen6_write_entry(dma_addr_t addr, unsigned int entry, unsigned int flags) { @@ -1382,6 +1406,15 @@ static const struct intel_gtt_driver sandybridge_gtt_driver = { .check_flags = gen6_check_flags, .chipset_flush = i9xx_chipset_flush, }; +static const struct intel_gtt_driver haswell_gtt_driver = { + .gen = 6, + .setup = i9xx_setup, + .cleanup = gen6_cleanup, + .write_entry = haswell_write_entry, + .dma_mask_size = 40, + .check_flags = gen6_check_flags, + .chipset_flush = i9xx_chipset_flush, +}; static const struct intel_gtt_driver valleyview_gtt_driver = { .gen = 7, .setup = i9xx_setup, @@ -1499,19 +1532,77 @@ static const struct intel_gtt_driver_description { { PCI_DEVICE_ID_INTEL_VALLEYVIEW_IG, "ValleyView", &valleyview_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_D_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_PLUS_IG, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_M_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_PLUS_IG, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_S_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, - { PCI_DEVICE_ID_INTEL_HASWELL_SDV, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_PLUS_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT1_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT2_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT2_PLUS_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT1_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT2_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT2_PLUS_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT1_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT2_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT2_PLUS_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT1_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT2_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT2_PLUS_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT1_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT2_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT2_PLUS_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT1_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT2_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT2_PLUS_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT1_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT2_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT2_PLUS_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT1_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT2_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT2_PLUS_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT1_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT2_IG, + "Haswell", &haswell_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT2_PLUS_IG, + "Haswell", &haswell_gtt_driver }, { 0, NULL, NULL } }; diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index d706bd0e9e800fd791e198b4b573b64296f3f40e..4fbdceb6f773d7e45189a22347668c34a0b52c63 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -160,7 +160,7 @@ static int __exit omap_rng_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int omap_rng_suspend(struct device *dev) { diff --git a/drivers/char/random.c b/drivers/char/random.c index 4ec04a754733baed5dd8595256a9c7998965d323..b86eae9b77dfaeb04dd2d4efefd6ebc01b9e0a93 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -125,21 +125,26 @@ * The current exported interfaces for gathering environmental noise * from the devices are: * + * void add_device_randomness(const void *buf, unsigned int size); * void add_input_randomness(unsigned int type, unsigned int code, * unsigned int value); - * void add_interrupt_randomness(int irq); + * void add_interrupt_randomness(int irq, int irq_flags); * void add_disk_randomness(struct gendisk *disk); * + * add_device_randomness() is for adding data to the random pool that + * is likely to differ between two devices (or possibly even per boot). + * This would be things like MAC addresses or serial numbers, or the + * read-out of the RTC. This does *not* add any actual entropy to the + * pool, but it initializes the pool to different values for devices + * that might otherwise be identical and have very little entropy + * available to them (particularly common in the embedded world). + * * add_input_randomness() uses the input layer interrupt timing, as well as * the event type information from the hardware. * - * add_interrupt_randomness() uses the inter-interrupt timing as random - * inputs to the entropy pool. Note that not all interrupts are good - * sources of randomness! For example, the timer interrupts is not a - * good choice, because the periodicity of the interrupts is too - * regular, and hence predictable to an attacker. Network Interface - * Controller interrupts are a better measure, since the timing of the - * NIC interrupts are more unpredictable. + * add_interrupt_randomness() uses the interrupt timing as random + * inputs to the entropy pool. Using the cycle counters and the irq source + * as inputs, it feeds the randomness roughly once a second. * * add_disk_randomness() uses what amounts to the seek time of block * layer request events, on a per-disk_devt basis, as input to the @@ -248,6 +253,8 @@ #include #include #include +#include +#include #ifdef CONFIG_GENERIC_HARDIRQS # include @@ -256,8 +263,12 @@ #include #include #include +#include #include +#define CREATE_TRACE_POINTS +#include + /* * Configuration information */ @@ -266,6 +277,8 @@ #define SEC_XFER_SIZE 512 #define EXTRACT_SIZE 10 +#define LONGS(x) (((x) + sizeof(unsigned long) - 1)/sizeof(unsigned long)) + /* * The minimum number of bits of entropy before we wake up a read on * /dev/random. Should be enough to do a significant reseed. @@ -420,8 +433,10 @@ struct entropy_store { /* read-write data: */ spinlock_t lock; unsigned add_ptr; + unsigned input_rotate; int entropy_count; - int input_rotate; + int entropy_total; + unsigned int initialized:1; __u8 last_data[EXTRACT_SIZE]; }; @@ -454,6 +469,10 @@ static struct entropy_store nonblocking_pool = { .pool = nonblocking_pool_data }; +static __u32 const twist_table[8] = { + 0x00000000, 0x3b6e20c8, 0x76dc4190, 0x4db26158, + 0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278 }; + /* * This function adds bytes into the entropy "pool". It does not * update the entropy estimate. The caller should call @@ -464,29 +483,24 @@ static struct entropy_store nonblocking_pool = { * it's cheap to do so and helps slightly in the expected case where * the entropy is concentrated in the low-order bits. */ -static void mix_pool_bytes_extract(struct entropy_store *r, const void *in, - int nbytes, __u8 out[64]) +static void _mix_pool_bytes(struct entropy_store *r, const void *in, + int nbytes, __u8 out[64]) { - static __u32 const twist_table[8] = { - 0x00000000, 0x3b6e20c8, 0x76dc4190, 0x4db26158, - 0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278 }; unsigned long i, j, tap1, tap2, tap3, tap4, tap5; int input_rotate; int wordmask = r->poolinfo->poolwords - 1; const char *bytes = in; __u32 w; - unsigned long flags; - /* Taps are constant, so we can load them without holding r->lock. */ tap1 = r->poolinfo->tap1; tap2 = r->poolinfo->tap2; tap3 = r->poolinfo->tap3; tap4 = r->poolinfo->tap4; tap5 = r->poolinfo->tap5; - spin_lock_irqsave(&r->lock, flags); - input_rotate = r->input_rotate; - i = r->add_ptr; + smp_rmb(); + input_rotate = ACCESS_ONCE(r->input_rotate); + i = ACCESS_ONCE(r->add_ptr); /* mix one byte at a time to simplify size handling and churn faster */ while (nbytes--) { @@ -513,19 +527,61 @@ static void mix_pool_bytes_extract(struct entropy_store *r, const void *in, input_rotate += i ? 7 : 14; } - r->input_rotate = input_rotate; - r->add_ptr = i; + ACCESS_ONCE(r->input_rotate) = input_rotate; + ACCESS_ONCE(r->add_ptr) = i; + smp_wmb(); if (out) for (j = 0; j < 16; j++) ((__u32 *)out)[j] = r->pool[(i - j) & wordmask]; +} + +static void __mix_pool_bytes(struct entropy_store *r, const void *in, + int nbytes, __u8 out[64]) +{ + trace_mix_pool_bytes_nolock(r->name, nbytes, _RET_IP_); + _mix_pool_bytes(r, in, nbytes, out); +} + +static void mix_pool_bytes(struct entropy_store *r, const void *in, + int nbytes, __u8 out[64]) +{ + unsigned long flags; + trace_mix_pool_bytes(r->name, nbytes, _RET_IP_); + spin_lock_irqsave(&r->lock, flags); + _mix_pool_bytes(r, in, nbytes, out); spin_unlock_irqrestore(&r->lock, flags); } -static void mix_pool_bytes(struct entropy_store *r, const void *in, int bytes) +struct fast_pool { + __u32 pool[4]; + unsigned long last; + unsigned short count; + unsigned char rotate; + unsigned char last_timer_intr; +}; + +/* + * This is a fast mixing routine used by the interrupt randomness + * collector. It's hardcoded for an 128 bit pool and assumes that any + * locks that might be needed are taken by the caller. + */ +static void fast_mix(struct fast_pool *f, const void *in, int nbytes) { - mix_pool_bytes_extract(r, in, bytes, NULL); + const char *bytes = in; + __u32 w; + unsigned i = f->count; + unsigned input_rotate = f->rotate; + + while (nbytes--) { + w = rol32(*bytes++, input_rotate & 31) ^ f->pool[i & 3] ^ + f->pool[(i + 1) & 3]; + f->pool[i & 3] = (w >> 3) ^ twist_table[w & 7]; + input_rotate += (i++ & 3) ? 7 : 14; + } + f->count = i; + f->rotate = input_rotate; } /* @@ -533,30 +589,38 @@ static void mix_pool_bytes(struct entropy_store *r, const void *in, int bytes) */ static void credit_entropy_bits(struct entropy_store *r, int nbits) { - unsigned long flags; - int entropy_count; + int entropy_count, orig; if (!nbits) return; - spin_lock_irqsave(&r->lock, flags); - DEBUG_ENT("added %d entropy credits to %s\n", nbits, r->name); - entropy_count = r->entropy_count; +retry: + entropy_count = orig = ACCESS_ONCE(r->entropy_count); entropy_count += nbits; + if (entropy_count < 0) { DEBUG_ENT("negative entropy/overflow\n"); entropy_count = 0; } else if (entropy_count > r->poolinfo->POOLBITS) entropy_count = r->poolinfo->POOLBITS; - r->entropy_count = entropy_count; + if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig) + goto retry; + + if (!r->initialized && nbits > 0) { + r->entropy_total += nbits; + if (r->entropy_total > 128) + r->initialized = 1; + } + + trace_credit_entropy_bits(r->name, nbits, entropy_count, + r->entropy_total, _RET_IP_); /* should we wake readers? */ if (r == &input_pool && entropy_count >= random_read_wakeup_thresh) { wake_up_interruptible(&random_read_wait); kill_fasync(&fasync, SIGIO, POLL_IN); } - spin_unlock_irqrestore(&r->lock, flags); } /********************************************************************* @@ -572,42 +636,24 @@ struct timer_rand_state { unsigned dont_count_entropy:1; }; -#ifndef CONFIG_GENERIC_HARDIRQS - -static struct timer_rand_state *irq_timer_state[NR_IRQS]; - -static struct timer_rand_state *get_timer_rand_state(unsigned int irq) -{ - return irq_timer_state[irq]; -} - -static void set_timer_rand_state(unsigned int irq, - struct timer_rand_state *state) -{ - irq_timer_state[irq] = state; -} - -#else - -static struct timer_rand_state *get_timer_rand_state(unsigned int irq) -{ - struct irq_desc *desc; - - desc = irq_to_desc(irq); - - return desc->timer_rand_state; -} - -static void set_timer_rand_state(unsigned int irq, - struct timer_rand_state *state) +/* + * Add device- or boot-specific data to the input and nonblocking + * pools to help initialize them to unique values. + * + * None of this adds any entropy, it is meant to avoid the + * problem of the nonblocking pool having similar initial state + * across largely identical devices. + */ +void add_device_randomness(const void *buf, unsigned int size) { - struct irq_desc *desc; + unsigned long time = get_cycles() ^ jiffies; - desc = irq_to_desc(irq); - - desc->timer_rand_state = state; + mix_pool_bytes(&input_pool, buf, size, NULL); + mix_pool_bytes(&input_pool, &time, sizeof(time), NULL); + mix_pool_bytes(&nonblocking_pool, buf, size, NULL); + mix_pool_bytes(&nonblocking_pool, &time, sizeof(time), NULL); } -#endif +EXPORT_SYMBOL(add_device_randomness); static struct timer_rand_state input_timer_state; @@ -637,13 +683,9 @@ static void add_timer_randomness(struct timer_rand_state *state, unsigned num) goto out; sample.jiffies = jiffies; - - /* Use arch random value, fall back to cycles */ - if (!arch_get_random_int(&sample.cycles)) - sample.cycles = get_cycles(); - + sample.cycles = get_cycles(); sample.num = num; - mix_pool_bytes(&input_pool, &sample, sizeof(sample)); + mix_pool_bytes(&input_pool, &sample, sizeof(sample), NULL); /* * Calculate number of bits of randomness we probably added. @@ -700,17 +742,48 @@ void add_input_randomness(unsigned int type, unsigned int code, } EXPORT_SYMBOL_GPL(add_input_randomness); -void add_interrupt_randomness(int irq) +static DEFINE_PER_CPU(struct fast_pool, irq_randomness); + +void add_interrupt_randomness(int irq, int irq_flags) { - struct timer_rand_state *state; + struct entropy_store *r; + struct fast_pool *fast_pool = &__get_cpu_var(irq_randomness); + struct pt_regs *regs = get_irq_regs(); + unsigned long now = jiffies; + __u32 input[4], cycles = get_cycles(); + + input[0] = cycles ^ jiffies; + input[1] = irq; + if (regs) { + __u64 ip = instruction_pointer(regs); + input[2] = ip; + input[3] = ip >> 32; + } - state = get_timer_rand_state(irq); + fast_mix(fast_pool, input, sizeof(input)); - if (state == NULL) + if ((fast_pool->count & 1023) && + !time_after(now, fast_pool->last + HZ)) return; - DEBUG_ENT("irq event %d\n", irq); - add_timer_randomness(state, 0x100 + irq); + fast_pool->last = now; + + r = nonblocking_pool.initialized ? &input_pool : &nonblocking_pool; + __mix_pool_bytes(r, &fast_pool->pool, sizeof(fast_pool->pool), NULL); + /* + * If we don't have a valid cycle counter, and we see + * back-to-back timer interrupts, then skip giving credit for + * any entropy. + */ + if (cycles == 0) { + if (irq_flags & __IRQF_TIMER) { + if (fast_pool->last_timer_intr) + return; + fast_pool->last_timer_intr = 1; + } else + fast_pool->last_timer_intr = 0; + } + credit_entropy_bits(r, 1); } #ifdef CONFIG_BLOCK @@ -742,7 +815,7 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf, */ static void xfer_secondary_pool(struct entropy_store *r, size_t nbytes) { - __u32 tmp[OUTPUT_POOL_WORDS]; + __u32 tmp[OUTPUT_POOL_WORDS]; if (r->pull && r->entropy_count < nbytes * 8 && r->entropy_count < r->poolinfo->POOLBITS) { @@ -761,7 +834,7 @@ static void xfer_secondary_pool(struct entropy_store *r, size_t nbytes) bytes = extract_entropy(r->pull, tmp, bytes, random_read_wakeup_thresh / 8, rsvd); - mix_pool_bytes(r, tmp, bytes); + mix_pool_bytes(r, tmp, bytes, NULL); credit_entropy_bits(r, bytes*8); } } @@ -820,13 +893,19 @@ static size_t account(struct entropy_store *r, size_t nbytes, int min, static void extract_buf(struct entropy_store *r, __u8 *out) { int i; - __u32 hash[5], workspace[SHA_WORKSPACE_WORDS]; + union { + __u32 w[5]; + unsigned long l[LONGS(EXTRACT_SIZE)]; + } hash; + __u32 workspace[SHA_WORKSPACE_WORDS]; __u8 extract[64]; + unsigned long flags; /* Generate a hash across the pool, 16 words (512 bits) at a time */ - sha_init(hash); + sha_init(hash.w); + spin_lock_irqsave(&r->lock, flags); for (i = 0; i < r->poolinfo->poolwords; i += 16) - sha_transform(hash, (__u8 *)(r->pool + i), workspace); + sha_transform(hash.w, (__u8 *)(r->pool + i), workspace); /* * We mix the hash back into the pool to prevent backtracking @@ -837,13 +916,14 @@ static void extract_buf(struct entropy_store *r, __u8 *out) * brute-forcing the feedback as hard as brute-forcing the * hash. */ - mix_pool_bytes_extract(r, hash, sizeof(hash), extract); + __mix_pool_bytes(r, hash.w, sizeof(hash.w), extract); + spin_unlock_irqrestore(&r->lock, flags); /* * To avoid duplicates, we atomically extract a portion of the * pool while mixing, and hash one final time. */ - sha_transform(hash, extract, workspace); + sha_transform(hash.w, extract, workspace); memset(extract, 0, sizeof(extract)); memset(workspace, 0, sizeof(workspace)); @@ -852,20 +932,32 @@ static void extract_buf(struct entropy_store *r, __u8 *out) * pattern, we fold it in half. Thus, we always feed back * twice as much data as we output. */ - hash[0] ^= hash[3]; - hash[1] ^= hash[4]; - hash[2] ^= rol32(hash[2], 16); - memcpy(out, hash, EXTRACT_SIZE); - memset(hash, 0, sizeof(hash)); + hash.w[0] ^= hash.w[3]; + hash.w[1] ^= hash.w[4]; + hash.w[2] ^= rol32(hash.w[2], 16); + + /* + * If we have a architectural hardware random number + * generator, mix that in, too. + */ + for (i = 0; i < LONGS(EXTRACT_SIZE); i++) { + unsigned long v; + if (!arch_get_random_long(&v)) + break; + hash.l[i] ^= v; + } + + memcpy(out, &hash, EXTRACT_SIZE); + memset(&hash, 0, sizeof(hash)); } static ssize_t extract_entropy(struct entropy_store *r, void *buf, - size_t nbytes, int min, int reserved) + size_t nbytes, int min, int reserved) { ssize_t ret = 0, i; __u8 tmp[EXTRACT_SIZE]; - unsigned long flags; + trace_extract_entropy(r->name, nbytes, r->entropy_count, _RET_IP_); xfer_secondary_pool(r, nbytes); nbytes = account(r, nbytes, min, reserved); @@ -873,6 +965,8 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf, extract_buf(r, tmp); if (fips_enabled) { + unsigned long flags; + spin_lock_irqsave(&r->lock, flags); if (!memcmp(tmp, r->last_data, EXTRACT_SIZE)) panic("Hardware RNG duplicated output!\n"); @@ -898,6 +992,7 @@ static ssize_t extract_entropy_user(struct entropy_store *r, void __user *buf, ssize_t ret = 0, i; __u8 tmp[EXTRACT_SIZE]; + trace_extract_entropy_user(r->name, nbytes, r->entropy_count, _RET_IP_); xfer_secondary_pool(r, nbytes); nbytes = account(r, nbytes, 0, 0); @@ -931,17 +1026,35 @@ static ssize_t extract_entropy_user(struct entropy_store *r, void __user *buf, /* * This function is the exported kernel interface. It returns some - * number of good random numbers, suitable for seeding TCP sequence - * numbers, etc. + * number of good random numbers, suitable for key generation, seeding + * TCP sequence numbers, etc. It does not use the hw random number + * generator, if available; use get_random_bytes_arch() for that. */ void get_random_bytes(void *buf, int nbytes) +{ + extract_entropy(&nonblocking_pool, buf, nbytes, 0, 0); +} +EXPORT_SYMBOL(get_random_bytes); + +/* + * This function will use the architecture-specific hardware random + * number generator if it is available. The arch-specific hw RNG will + * almost certainly be faster than what we can do in software, but it + * is impossible to verify that it is implemented securely (as + * opposed, to, say, the AES encryption of a sequence number using a + * key known by the NSA). So it's useful if we need the speed, but + * only if we're willing to trust the hardware manufacturer not to + * have put in a back door. + */ +void get_random_bytes_arch(void *buf, int nbytes) { char *p = buf; + trace_get_random_bytes(nbytes, _RET_IP_); while (nbytes) { unsigned long v; int chunk = min(nbytes, (int)sizeof(unsigned long)); - + if (!arch_get_random_long(&v)) break; @@ -950,9 +1063,11 @@ void get_random_bytes(void *buf, int nbytes) nbytes -= chunk; } - extract_entropy(&nonblocking_pool, p, nbytes, 0, 0); + if (nbytes) + extract_entropy(&nonblocking_pool, p, nbytes, 0, 0); } -EXPORT_SYMBOL(get_random_bytes); +EXPORT_SYMBOL(get_random_bytes_arch); + /* * init_std_data - initialize pool with system data @@ -966,23 +1081,30 @@ EXPORT_SYMBOL(get_random_bytes); static void init_std_data(struct entropy_store *r) { int i; - ktime_t now; - unsigned long flags; + ktime_t now = ktime_get_real(); + unsigned long rv; - spin_lock_irqsave(&r->lock, flags); r->entropy_count = 0; - spin_unlock_irqrestore(&r->lock, flags); - - now = ktime_get_real(); - mix_pool_bytes(r, &now, sizeof(now)); - for (i = r->poolinfo->POOLBYTES; i > 0; i -= sizeof flags) { - if (!arch_get_random_long(&flags)) + r->entropy_total = 0; + mix_pool_bytes(r, &now, sizeof(now), NULL); + for (i = r->poolinfo->POOLBYTES; i > 0; i -= sizeof(rv)) { + if (!arch_get_random_long(&rv)) break; - mix_pool_bytes(r, &flags, sizeof(flags)); + mix_pool_bytes(r, &rv, sizeof(rv), NULL); } - mix_pool_bytes(r, utsname(), sizeof(*(utsname()))); + mix_pool_bytes(r, utsname(), sizeof(*(utsname())), NULL); } +/* + * Note that setup_arch() may call add_device_randomness() + * long before we get here. This allows seeding of the pools + * with some platform dependent data very early in the boot + * process. But it limits our options here. We must use + * statically allocated structures that already have all + * initializations complete at compile time. We should also + * take care not to overwrite the precious per platform data + * we were given. + */ static int rand_initialize(void) { init_std_data(&input_pool); @@ -992,24 +1114,6 @@ static int rand_initialize(void) } module_init(rand_initialize); -void rand_initialize_irq(int irq) -{ - struct timer_rand_state *state; - - state = get_timer_rand_state(irq); - - if (state) - return; - - /* - * If kzalloc returns null, we just won't use that entropy - * source. - */ - state = kzalloc(sizeof(struct timer_rand_state), GFP_KERNEL); - if (state) - set_timer_rand_state(irq, state); -} - #ifdef CONFIG_BLOCK void rand_initialize_disk(struct gendisk *disk) { @@ -1117,7 +1221,7 @@ write_pool(struct entropy_store *r, const char __user *buffer, size_t count) count -= bytes; p += bytes; - mix_pool_bytes(r, buf, bytes); + mix_pool_bytes(r, buf, bytes, NULL); cond_resched(); } @@ -1279,6 +1383,7 @@ static int proc_do_uuid(ctl_table *table, int write, } static int sysctl_poolsize = INPUT_POOL_WORDS * 32; +extern ctl_table random_table[]; ctl_table random_table[] = { { .procname = "poolsize", @@ -1344,7 +1449,7 @@ late_initcall(random_int_secret_init); * value is not cryptographically secure but for several uses the cost of * depleting entropy is too high */ -DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash); +static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash); unsigned int get_random_int(void) { __u32 *hash; diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 89682fa8801ea0fafb1f8e9556ca148ab0b4f6f9..c4be3519a587c4fe33c3a14be17ba72e6067d9a0 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -807,6 +807,7 @@ module_param_string(hid, tpm_pnp_tbl[TIS_HID_USR_IDX].id, MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe"); #endif +#ifdef CONFIG_PM_SLEEP static int tpm_tis_resume(struct device *dev) { struct tpm_chip *chip = dev_get_drvdata(dev); @@ -816,6 +817,7 @@ static int tpm_tis_resume(struct device *dev) return tpm_pm_resume(dev); } +#endif static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume); diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 5869ea3870545f0f7c3ab64a185e1c486243b4e1..72ce247a0e8d5c08395fe92c9163a8c376c555bc 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -1,4 +1,5 @@ # common clock types +obj-$(CONFIG_HAVE_CLK) += clk-devres.o obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o diff --git a/drivers/clk/clk-devres.c b/drivers/clk/clk-devres.c new file mode 100644 index 0000000000000000000000000000000000000000..8f571548870f4b46b37854b3a6ebf90105f68154 --- /dev/null +++ b/drivers/clk/clk-devres.c @@ -0,0 +1,55 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +static void devm_clk_release(struct device *dev, void *res) +{ + clk_put(*(struct clk **)res); +} + +struct clk *devm_clk_get(struct device *dev, const char *id) +{ + struct clk **ptr, *clk; + + ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + clk = clk_get(dev, id); + if (!IS_ERR(clk)) { + *ptr = clk; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return clk; +} +EXPORT_SYMBOL(devm_clk_get); + +static int devm_clk_match(struct device *dev, void *res, void *data) +{ + struct clk **c = res; + if (!c || !*c) { + WARN_ON(!c || !*c); + return 0; + } + return *c == data; +} + +void devm_clk_put(struct device *dev, struct clk *clk) +{ + int ret; + + ret = devres_release(dev, devm_clk_release, devm_clk_match, clk); + + WARN_ON(ret); +} +EXPORT_SYMBOL(devm_clk_put); diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index d423c9bdd71a9d4670c340c94f7f1eb08152ed41..442a31363873d35f319e0d5ee5b6b250084c02fc 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -171,51 +171,6 @@ void clk_put(struct clk *clk) } EXPORT_SYMBOL(clk_put); -static void devm_clk_release(struct device *dev, void *res) -{ - clk_put(*(struct clk **)res); -} - -struct clk *devm_clk_get(struct device *dev, const char *id) -{ - struct clk **ptr, *clk; - - ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL); - if (!ptr) - return ERR_PTR(-ENOMEM); - - clk = clk_get(dev, id); - if (!IS_ERR(clk)) { - *ptr = clk; - devres_add(dev, ptr); - } else { - devres_free(ptr); - } - - return clk; -} -EXPORT_SYMBOL(devm_clk_get); - -static int devm_clk_match(struct device *dev, void *res, void *data) -{ - struct clk **c = res; - if (!c || !*c) { - WARN_ON(!c || !*c); - return 0; - } - return *c == data; -} - -void devm_clk_put(struct device *dev, struct clk *clk) -{ - int ret; - - ret = devres_destroy(dev, devm_clk_release, devm_clk_match, clk); - - WARN_ON(ret); -} -EXPORT_SYMBOL(devm_clk_put); - void clkdev_add(struct clk_lookup *cl) { mutex_lock(&clocks_mutex); diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c index 540795cd0760b434e53c0b10afd41d295892c836..d9279385304d8b86fff47d58f3b623b0c804a046 100644 --- a/drivers/clocksource/cs5535-clockevt.c +++ b/drivers/clocksource/cs5535-clockevt.c @@ -53,7 +53,7 @@ static struct cs5535_mfgpt_timer *cs5535_event_clock; #define MFGPT_PERIODIC (MFGPT_HZ / HZ) /* - * The MFPGT timers on the CS5536 provide us with suitable timers to use + * The MFGPT timers on the CS5536 provide us with suitable timers to use * as clock event sources - not as good as a HPET or APIC, but certainly * better than the PIT. This isn't a general purpose MFGPT driver, but * a simplified one designed specifically to act as a clock event source. @@ -144,7 +144,7 @@ static int __init cs5535_mfgpt_init(void) timer = cs5535_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); if (!timer) { - printk(KERN_ERR DRV_NAME ": Could not allocate MFPGT timer\n"); + printk(KERN_ERR DRV_NAME ": Could not allocate MFGPT timer\n"); return -ENODEV; } cs5535_event_clock = timer; diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 17fa04d08be9cc0af181e5f20398128d8b4d5234..b47034e650a579b9d0263f8d0a03af2ecc8b3aa7 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -218,7 +218,7 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) policy->cur = policy->min = policy->max = omap_getspeed(policy->cpu); - if (atomic_inc_return(&freq_table_users) == 1) + if (!freq_table) result = opp_init_cpufreq_table(mpu_dev, &freq_table); if (result) { @@ -227,6 +227,8 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) goto fail_ck; } + atomic_inc_return(&freq_table_users); + result = cpufreq_frequency_table_cpuinfo(policy, freq_table); if (result) goto fail_table; diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c index cdc02ac8f41a7ff5d3f121e2b0927fd8bf99ae7a..503996a94a6af3d4f41292794c14f261ada96ae1 100644 --- a/drivers/cpufreq/pcc-cpufreq.c +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -454,6 +454,7 @@ static int __init pcc_cpufreq_probe(void) mem_resource->address_length); if (pcch_virt_addr == NULL) { pr_debug("probe: could not map shared mem region\n"); + ret = -ENOMEM; goto out_free; } pcch_hdr = pcch_virt_addr; diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index c0e816468e300f242735f4825d09b9d291a9b522..1a40935c85fdcc1f21e976ad8dbd5298a87d6060 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -35,7 +35,6 @@ #include #include #include -#include /* for current / set_cpus_allowed() */ #include #include @@ -1139,16 +1138,23 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, return res; } -/* Driver entry point to switch to the target frequency */ -static int powernowk8_target(struct cpufreq_policy *pol, - unsigned targfreq, unsigned relation) +struct powernowk8_target_arg { + struct cpufreq_policy *pol; + unsigned targfreq; + unsigned relation; +}; + +static long powernowk8_target_fn(void *arg) { - cpumask_var_t oldmask; + struct powernowk8_target_arg *pta = arg; + struct cpufreq_policy *pol = pta->pol; + unsigned targfreq = pta->targfreq; + unsigned relation = pta->relation; struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); u32 checkfid; u32 checkvid; unsigned int newstate; - int ret = -EIO; + int ret; if (!data) return -EINVAL; @@ -1156,29 +1162,16 @@ static int powernowk8_target(struct cpufreq_policy *pol, checkfid = data->currfid; checkvid = data->currvid; - /* only run on specific CPU from here on. */ - /* This is poor form: use a workqueue or smp_call_function_single */ - if (!alloc_cpumask_var(&oldmask, GFP_KERNEL)) - return -ENOMEM; - - cpumask_copy(oldmask, tsk_cpus_allowed(current)); - set_cpus_allowed_ptr(current, cpumask_of(pol->cpu)); - - if (smp_processor_id() != pol->cpu) { - printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); - goto err_out; - } - if (pending_bit_stuck()) { printk(KERN_ERR PFX "failing targ, change pending bit set\n"); - goto err_out; + return -EIO; } pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n", pol->cpu, targfreq, pol->min, pol->max, relation); if (query_current_values_with_pending_wait(data)) - goto err_out; + return -EIO; if (cpu_family != CPU_HW_PSTATE) { pr_debug("targ: curr fid 0x%x, vid 0x%x\n", @@ -1196,7 +1189,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) - goto err_out; + return -EIO; mutex_lock(&fidvid_mutex); @@ -1209,9 +1202,8 @@ static int powernowk8_target(struct cpufreq_policy *pol, ret = transition_frequency_fidvid(data, newstate); if (ret) { printk(KERN_ERR PFX "transition frequency failed\n"); - ret = 1; mutex_unlock(&fidvid_mutex); - goto err_out; + return 1; } mutex_unlock(&fidvid_mutex); @@ -1220,12 +1212,25 @@ static int powernowk8_target(struct cpufreq_policy *pol, data->powernow_table[newstate].index); else pol->cur = find_khz_freq_from_fid(data->currfid); - ret = 0; -err_out: - set_cpus_allowed_ptr(current, oldmask); - free_cpumask_var(oldmask); - return ret; + return 0; +} + +/* Driver entry point to switch to the target frequency */ +static int powernowk8_target(struct cpufreq_policy *pol, + unsigned targfreq, unsigned relation) +{ + struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq, + .relation = relation }; + + /* + * Must run on @pol->cpu. cpufreq core is responsible for ensuring + * that we're bound to the current CPU and pol->cpu stays online. + */ + if (smp_processor_id() == pol->cpu) + return powernowk8_target_fn(&pta); + else + return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta); } /* Driver entry point to verify the policy and range of frequencies */ diff --git a/drivers/cpuidle/coupled.c b/drivers/cpuidle/coupled.c index 2c9bf2692232e51a66e5455368d9881383ccfc2f..3265844839bfe9c79ef8849705262a52d16cc4e1 100644 --- a/drivers/cpuidle/coupled.c +++ b/drivers/cpuidle/coupled.c @@ -678,10 +678,22 @@ static int cpuidle_coupled_cpu_notify(struct notifier_block *nb, int cpu = (unsigned long)hcpu; struct cpuidle_device *dev; + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_UP_PREPARE: + case CPU_DOWN_PREPARE: + case CPU_ONLINE: + case CPU_DEAD: + case CPU_UP_CANCELED: + case CPU_DOWN_FAILED: + break; + default: + return NOTIFY_OK; + } + mutex_lock(&cpuidle_lock); dev = per_cpu(cpuidle_devices, cpu); - if (!dev->coupled) + if (!dev || !dev->coupled) goto out; switch (action & ~CPU_TASKS_FROZEN) { diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c index 53c8c51d58817cb62b4641d5e923bb4f72b39f2f..93d14070141ae64fe4e96dd838fc28c36061b3cf 100644 --- a/drivers/crypto/caam/jr.c +++ b/drivers/crypto/caam/jr.c @@ -63,7 +63,7 @@ static void caam_jr_dequeue(unsigned long devarg) head = ACCESS_ONCE(jrp->head); - spin_lock_bh(&jrp->outlock); + spin_lock(&jrp->outlock); sw_idx = tail = jrp->tail; hw_idx = jrp->out_ring_read_index; @@ -115,7 +115,7 @@ static void caam_jr_dequeue(unsigned long devarg) jrp->tail = tail; } - spin_unlock_bh(&jrp->outlock); + spin_unlock(&jrp->outlock); /* Finally, execute user's callback */ usercall(dev, userdesc, userstatus, userarg); @@ -236,14 +236,14 @@ int caam_jr_enqueue(struct device *dev, u32 *desc, return -EIO; } - spin_lock(&jrp->inplock); + spin_lock_bh(&jrp->inplock); head = jrp->head; tail = ACCESS_ONCE(jrp->tail); if (!rd_reg32(&jrp->rregs->inpring_avail) || CIRC_SPACE(head, tail, JOBR_DEPTH) <= 0) { - spin_unlock(&jrp->inplock); + spin_unlock_bh(&jrp->inplock); dma_unmap_single(dev, desc_dma, desc_size, DMA_TO_DEVICE); return -EBUSY; } @@ -265,7 +265,7 @@ int caam_jr_enqueue(struct device *dev, u32 *desc, wr_reg32(&jrp->rregs->inpring_jobadd, 1); - spin_unlock(&jrp->inplock); + spin_unlock_bh(&jrp->inplock); return 0; } diff --git a/drivers/crypto/caam/key_gen.c b/drivers/crypto/caam/key_gen.c index 002888185f170e92fa798233a40c64ef2258d42c..d216cd3cc569ecdbf195f45b055a5489470f0b70 100644 --- a/drivers/crypto/caam/key_gen.c +++ b/drivers/crypto/caam/key_gen.c @@ -120,3 +120,4 @@ u32 gen_split_key(struct device *jrdev, u8 *key_out, int split_key_len, return ret; } +EXPORT_SYMBOL(gen_split_key); diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index c9c4befb5a8d261701698c570c668d5009113a64..df14358d7fa1658c48e10d8b7a768f32eec6b9ac 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -821,8 +821,8 @@ static int hifn_register_rng(struct hifn_device *dev) /* * We must wait at least 256 Pk_clk cycles between two reads of the rng. */ - dev->rng_wait_time = DIV_ROUND_UP(NSEC_PER_SEC, dev->pk_clk_freq) * - 256; + dev->rng_wait_time = DIV_ROUND_UP_ULL(NSEC_PER_SEC, + dev->pk_clk_freq) * 256; dev->rng.name = dev->name; dev->rng.data_present = hifn_rng_data_present, diff --git a/drivers/crypto/n2_core.c b/drivers/crypto/n2_core.c index 67b97c5fd85978bb09d4c9ab08ebe3afa86ff695..a8bd0310f8fec7fe5f8f7bceaf1987f7f38bd8dc 100644 --- a/drivers/crypto/n2_core.c +++ b/drivers/crypto/n2_core.c @@ -1610,8 +1610,7 @@ static int spu_map_ino(struct platform_device *dev, struct spu_mdesc_info *ip, sprintf(p->irq_name, "%s-%d", irq_name, index); - return request_irq(p->irq, handler, IRQF_SAMPLE_RANDOM, - p->irq_name, p); + return request_irq(p->irq, handler, 0, p->irq_name, p); } static struct kmem_cache *queue_cache[2]; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index d45cf1bcbde5f6b096d5cf38bf13b9c9ddf23a86..d06ea2950dd9ffb9ad266bcedbb2db934e020376 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -53,6 +53,7 @@ config AMBA_PL08X bool "ARM PrimeCell PL080 or PL081 support" depends on ARM_AMBA && EXPERIMENTAL select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS help Platform has a PL08x DMAC device which can provide DMA engine support @@ -269,6 +270,7 @@ config DMA_SA11X0 tristate "SA-11x0 DMA support" depends on ARCH_SA1100 select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS help Support the DMA engine found on Intel StrongARM SA-1100 and SA-1110 SoCs. This DMA engine can only be used with on-chip @@ -284,9 +286,18 @@ config MMP_TDMA Say Y here if you enabled MMP ADMA, otherwise say N. +config DMA_OMAP + tristate "OMAP DMA support" + depends on ARCH_OMAP + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + config DMA_ENGINE bool +config DMA_VIRTUAL_CHANNELS + tristate + comment "DMA Clients" depends on DMA_ENGINE diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 640356add0a31f0bea96cc0568a2f290e41b0494..4cf6b128ab9a466b8f4c2c5237064f0f8e80846f 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -2,6 +2,7 @@ ccflags-$(CONFIG_DMADEVICES_DEBUG) := -DDEBUG ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG obj-$(CONFIG_DMA_ENGINE) += dmaengine.o +obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o obj-$(CONFIG_NET_DMA) += iovlock.o obj-$(CONFIG_INTEL_MID_DMAC) += intel_mid_dma.o obj-$(CONFIG_DMATEST) += dmatest.o @@ -30,3 +31,4 @@ obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o +obj-$(CONFIG_DMA_OMAP) += omap-dma.o diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 49ecbbb8932df2ecbc10aa601edd274acc21cf19..6fbeebb9486fdae644a0268393c7650033b856b4 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -86,10 +86,12 @@ #include #include "dmaengine.h" +#include "virt-dma.h" #define DRIVER_NAME "pl08xdmac" static struct amba_driver pl08x_amba_driver; +struct pl08x_driver_data; /** * struct vendor_data - vendor-specific config parameters for PL08x derivatives @@ -118,6 +120,123 @@ struct pl08x_lli { u32 cctl; }; +/** + * struct pl08x_bus_data - information of source or destination + * busses for a transfer + * @addr: current address + * @maxwidth: the maximum width of a transfer on this bus + * @buswidth: the width of this bus in bytes: 1, 2 or 4 + */ +struct pl08x_bus_data { + dma_addr_t addr; + u8 maxwidth; + u8 buswidth; +}; + +/** + * struct pl08x_phy_chan - holder for the physical channels + * @id: physical index to this channel + * @lock: a lock to use when altering an instance of this struct + * @serving: the virtual channel currently being served by this physical + * channel + * @locked: channel unavailable for the system, e.g. dedicated to secure + * world + */ +struct pl08x_phy_chan { + unsigned int id; + void __iomem *base; + spinlock_t lock; + struct pl08x_dma_chan *serving; + bool locked; +}; + +/** + * struct pl08x_sg - structure containing data per sg + * @src_addr: src address of sg + * @dst_addr: dst address of sg + * @len: transfer len in bytes + * @node: node for txd's dsg_list + */ +struct pl08x_sg { + dma_addr_t src_addr; + dma_addr_t dst_addr; + size_t len; + struct list_head node; +}; + +/** + * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor + * @vd: virtual DMA descriptor + * @dsg_list: list of children sg's + * @llis_bus: DMA memory address (physical) start for the LLIs + * @llis_va: virtual memory address start for the LLIs + * @cctl: control reg values for current txd + * @ccfg: config reg values for current txd + * @done: this marks completed descriptors, which should not have their + * mux released. + */ +struct pl08x_txd { + struct virt_dma_desc vd; + struct list_head dsg_list; + dma_addr_t llis_bus; + struct pl08x_lli *llis_va; + /* Default cctl value for LLIs */ + u32 cctl; + /* + * Settings to be put into the physical channel when we + * trigger this txd. Other registers are in llis_va[0]. + */ + u32 ccfg; + bool done; +}; + +/** + * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel + * states + * @PL08X_CHAN_IDLE: the channel is idle + * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport + * channel and is running a transfer on it + * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport + * channel, but the transfer is currently paused + * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport + * channel to become available (only pertains to memcpy channels) + */ +enum pl08x_dma_chan_state { + PL08X_CHAN_IDLE, + PL08X_CHAN_RUNNING, + PL08X_CHAN_PAUSED, + PL08X_CHAN_WAITING, +}; + +/** + * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel + * @vc: wrappped virtual channel + * @phychan: the physical channel utilized by this channel, if there is one + * @name: name of channel + * @cd: channel platform data + * @runtime_addr: address for RX/TX according to the runtime config + * @at: active transaction on this channel + * @lock: a lock for this channel data + * @host: a pointer to the host (internal use) + * @state: whether the channel is idle, paused, running etc + * @slave: whether this channel is a device (slave) or for memcpy + * @signal: the physical DMA request signal which this channel is using + * @mux_use: count of descriptors using this DMA request signal setting + */ +struct pl08x_dma_chan { + struct virt_dma_chan vc; + struct pl08x_phy_chan *phychan; + const char *name; + const struct pl08x_channel_data *cd; + struct dma_slave_config cfg; + struct pl08x_txd *at; + struct pl08x_driver_data *host; + enum pl08x_dma_chan_state state; + bool slave; + int signal; + unsigned mux_use; +}; + /** * struct pl08x_driver_data - the local state holder for the PL08x * @slave: slave engine for this instance @@ -128,7 +247,6 @@ struct pl08x_lli { * @pd: platform data passed in from the platform/machine * @phy_chans: array of data for the physical channels * @pool: a pool for the LLI descriptors - * @pool_ctr: counter of LLIs in the pool * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI * fetches * @mem_buses: set to indicate memory transfers on AHB2. @@ -143,10 +261,8 @@ struct pl08x_driver_data { struct pl08x_platform_data *pd; struct pl08x_phy_chan *phy_chans; struct dma_pool *pool; - int pool_ctr; u8 lli_buses; u8 mem_buses; - spinlock_t lock; }; /* @@ -162,12 +278,51 @@ struct pl08x_driver_data { static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan) { - return container_of(chan, struct pl08x_dma_chan, chan); + return container_of(chan, struct pl08x_dma_chan, vc.chan); } static inline struct pl08x_txd *to_pl08x_txd(struct dma_async_tx_descriptor *tx) { - return container_of(tx, struct pl08x_txd, tx); + return container_of(tx, struct pl08x_txd, vd.tx); +} + +/* + * Mux handling. + * + * This gives us the DMA request input to the PL08x primecell which the + * peripheral described by the channel data will be routed to, possibly + * via a board/SoC specific external MUX. One important point to note + * here is that this does not depend on the physical channel. + */ +static int pl08x_request_mux(struct pl08x_dma_chan *plchan) +{ + const struct pl08x_platform_data *pd = plchan->host->pd; + int ret; + + if (plchan->mux_use++ == 0 && pd->get_signal) { + ret = pd->get_signal(plchan->cd); + if (ret < 0) { + plchan->mux_use = 0; + return ret; + } + + plchan->signal = ret; + } + return 0; +} + +static void pl08x_release_mux(struct pl08x_dma_chan *plchan) +{ + const struct pl08x_platform_data *pd = plchan->host->pd; + + if (plchan->signal >= 0) { + WARN_ON(plchan->mux_use == 0); + + if (--plchan->mux_use == 0 && pd->put_signal) { + pd->put_signal(plchan->cd, plchan->signal); + plchan->signal = -1; + } + } } /* @@ -189,20 +344,25 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) * been set when the LLIs were constructed. Poke them into the hardware * and start the transfer. */ -static void pl08x_start_txd(struct pl08x_dma_chan *plchan, - struct pl08x_txd *txd) +static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan) { struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; - struct pl08x_lli *lli = &txd->llis_va[0]; + struct virt_dma_desc *vd = vchan_next_desc(&plchan->vc); + struct pl08x_txd *txd = to_pl08x_txd(&vd->tx); + struct pl08x_lli *lli; u32 val; + list_del(&txd->vd.node); + plchan->at = txd; /* Wait for channel inactive */ while (pl08x_phy_channel_busy(phychan)) cpu_relax(); + lli = &txd->llis_va[0]; + dev_vdbg(&pl08x->adev->dev, "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", @@ -311,10 +471,8 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) { struct pl08x_phy_chan *ch; struct pl08x_txd *txd; - unsigned long flags; size_t bytes = 0; - spin_lock_irqsave(&plchan->lock, flags); ch = plchan->phychan; txd = plchan->at; @@ -354,18 +512,6 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) } } - /* Sum up all queued transactions */ - if (!list_empty(&plchan->pend_list)) { - struct pl08x_txd *txdi; - list_for_each_entry(txdi, &plchan->pend_list, node) { - struct pl08x_sg *dsg; - list_for_each_entry(dsg, &txd->dsg_list, node) - bytes += dsg->len; - } - } - - spin_unlock_irqrestore(&plchan->lock, flags); - return bytes; } @@ -391,7 +537,6 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, if (!ch->locked && !ch->serving) { ch->serving = virt_chan; - ch->signal = -1; spin_unlock_irqrestore(&ch->lock, flags); break; } @@ -404,25 +549,114 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, return NULL; } - pm_runtime_get_sync(&pl08x->adev->dev); return ch; } +/* Mark the physical channel as free. Note, this write is atomic. */ static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x, struct pl08x_phy_chan *ch) { - unsigned long flags; + ch->serving = NULL; +} + +/* + * Try to allocate a physical channel. When successful, assign it to + * this virtual channel, and initiate the next descriptor. The + * virtual channel lock must be held at this point. + */ +static void pl08x_phy_alloc_and_start(struct pl08x_dma_chan *plchan) +{ + struct pl08x_driver_data *pl08x = plchan->host; + struct pl08x_phy_chan *ch; - spin_lock_irqsave(&ch->lock, flags); + ch = pl08x_get_phy_channel(pl08x, plchan); + if (!ch) { + dev_dbg(&pl08x->adev->dev, "no physical channel available for xfer on %s\n", plchan->name); + plchan->state = PL08X_CHAN_WAITING; + return; + } - /* Stop the channel and clear its interrupts */ - pl08x_terminate_phy_chan(pl08x, ch); + dev_dbg(&pl08x->adev->dev, "allocated physical channel %d for xfer on %s\n", + ch->id, plchan->name); - pm_runtime_put(&pl08x->adev->dev); + plchan->phychan = ch; + plchan->state = PL08X_CHAN_RUNNING; + pl08x_start_next_txd(plchan); +} - /* Mark it as free */ - ch->serving = NULL; - spin_unlock_irqrestore(&ch->lock, flags); +static void pl08x_phy_reassign_start(struct pl08x_phy_chan *ch, + struct pl08x_dma_chan *plchan) +{ + struct pl08x_driver_data *pl08x = plchan->host; + + dev_dbg(&pl08x->adev->dev, "reassigned physical channel %d for xfer on %s\n", + ch->id, plchan->name); + + /* + * We do this without taking the lock; we're really only concerned + * about whether this pointer is NULL or not, and we're guaranteed + * that this will only be called when it _already_ is non-NULL. + */ + ch->serving = plchan; + plchan->phychan = ch; + plchan->state = PL08X_CHAN_RUNNING; + pl08x_start_next_txd(plchan); +} + +/* + * Free a physical DMA channel, potentially reallocating it to another + * virtual channel if we have any pending. + */ +static void pl08x_phy_free(struct pl08x_dma_chan *plchan) +{ + struct pl08x_driver_data *pl08x = plchan->host; + struct pl08x_dma_chan *p, *next; + + retry: + next = NULL; + + /* Find a waiting virtual channel for the next transfer. */ + list_for_each_entry(p, &pl08x->memcpy.channels, vc.chan.device_node) + if (p->state == PL08X_CHAN_WAITING) { + next = p; + break; + } + + if (!next) { + list_for_each_entry(p, &pl08x->slave.channels, vc.chan.device_node) + if (p->state == PL08X_CHAN_WAITING) { + next = p; + break; + } + } + + /* Ensure that the physical channel is stopped */ + pl08x_terminate_phy_chan(pl08x, plchan->phychan); + + if (next) { + bool success; + + /* + * Eww. We know this isn't going to deadlock + * but lockdep probably doesn't. + */ + spin_lock(&next->vc.lock); + /* Re-check the state now that we have the lock */ + success = next->state == PL08X_CHAN_WAITING; + if (success) + pl08x_phy_reassign_start(plchan->phychan, next); + spin_unlock(&next->vc.lock); + + /* If the state changed, try to find another channel */ + if (!success) + goto retry; + } else { + /* No more jobs, so free up the physical channel */ + pl08x_put_phy_channel(pl08x, plchan->phychan); + } + + plchan->phychan = NULL; + plchan->state = PL08X_CHAN_IDLE; } /* @@ -585,8 +819,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, return 0; } - pl08x->pool_ctr++; - bd.txd = txd; bd.lli_bus = (pl08x->lli_buses & PL08X_AHB2) ? PL080_LLI_LM_AHB2 : 0; cctl = txd->cctl; @@ -802,18 +1034,14 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, return num_llis; } -/* You should call this with the struct pl08x lock held */ static void pl08x_free_txd(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { struct pl08x_sg *dsg, *_dsg; - /* Free the LLI */ if (txd->llis_va) dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus); - pl08x->pool_ctr--; - list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) { list_del(&dsg->node); kfree(dsg); @@ -822,133 +1050,75 @@ static void pl08x_free_txd(struct pl08x_driver_data *pl08x, kfree(txd); } -static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x, - struct pl08x_dma_chan *plchan) +static void pl08x_unmap_buffers(struct pl08x_txd *txd) { - struct pl08x_txd *txdi = NULL; - struct pl08x_txd *next; - - if (!list_empty(&plchan->pend_list)) { - list_for_each_entry_safe(txdi, - next, &plchan->pend_list, node) { - list_del(&txdi->node); - pl08x_free_txd(pl08x, txdi); + struct device *dev = txd->vd.tx.chan->device->dev; + struct pl08x_sg *dsg; + + if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (txd->vd.tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_single(dev, dsg->src_addr, dsg->len, + DMA_TO_DEVICE); + else { + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_page(dev, dsg->src_addr, dsg->len, + DMA_TO_DEVICE); } } + if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (txd->vd.tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_single(dev, dsg->dst_addr, dsg->len, + DMA_FROM_DEVICE); + else + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_page(dev, dsg->dst_addr, dsg->len, + DMA_FROM_DEVICE); + } } -/* - * The DMA ENGINE API - */ -static int pl08x_alloc_chan_resources(struct dma_chan *chan) +static void pl08x_desc_free(struct virt_dma_desc *vd) { - return 0; -} + struct pl08x_txd *txd = to_pl08x_txd(&vd->tx); + struct pl08x_dma_chan *plchan = to_pl08x_chan(vd->tx.chan); -static void pl08x_free_chan_resources(struct dma_chan *chan) -{ + if (!plchan->slave) + pl08x_unmap_buffers(txd); + + if (!txd->done) + pl08x_release_mux(plchan); + + pl08x_free_txd(plchan->host, txd); } -/* - * This should be called with the channel plchan->lock held - */ -static int prep_phy_channel(struct pl08x_dma_chan *plchan, - struct pl08x_txd *txd) +static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x, + struct pl08x_dma_chan *plchan) { - struct pl08x_driver_data *pl08x = plchan->host; - struct pl08x_phy_chan *ch; - int ret; - - /* Check if we already have a channel */ - if (plchan->phychan) { - ch = plchan->phychan; - goto got_channel; - } + LIST_HEAD(head); + struct pl08x_txd *txd; - ch = pl08x_get_phy_channel(pl08x, plchan); - if (!ch) { - /* No physical channel available, cope with it */ - dev_dbg(&pl08x->adev->dev, "no physical channel available for xfer on %s\n", plchan->name); - return -EBUSY; - } + vchan_get_all_descriptors(&plchan->vc, &head); - /* - * OK we have a physical channel: for memcpy() this is all we - * need, but for slaves the physical signals may be muxed! - * Can the platform allow us to use this channel? - */ - if (plchan->slave && pl08x->pd->get_signal) { - ret = pl08x->pd->get_signal(plchan); - if (ret < 0) { - dev_dbg(&pl08x->adev->dev, - "unable to use physical channel %d for transfer on %s due to platform restrictions\n", - ch->id, plchan->name); - /* Release physical channel & return */ - pl08x_put_phy_channel(pl08x, ch); - return -EBUSY; - } - ch->signal = ret; + while (!list_empty(&head)) { + txd = list_first_entry(&head, struct pl08x_txd, vd.node); + list_del(&txd->vd.node); + pl08x_desc_free(&txd->vd); } - - plchan->phychan = ch; - dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n", - ch->id, - ch->signal, - plchan->name); - -got_channel: - /* Assign the flow control signal to this channel */ - if (txd->direction == DMA_MEM_TO_DEV) - txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT; - else if (txd->direction == DMA_DEV_TO_MEM) - txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT; - - plchan->phychan_hold++; - - return 0; } -static void release_phy_channel(struct pl08x_dma_chan *plchan) +/* + * The DMA ENGINE API + */ +static int pl08x_alloc_chan_resources(struct dma_chan *chan) { - struct pl08x_driver_data *pl08x = plchan->host; - - if ((plchan->phychan->signal >= 0) && pl08x->pd->put_signal) { - pl08x->pd->put_signal(plchan); - plchan->phychan->signal = -1; - } - pl08x_put_phy_channel(pl08x, plchan->phychan); - plchan->phychan = NULL; + return 0; } -static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) +static void pl08x_free_chan_resources(struct dma_chan *chan) { - struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); - struct pl08x_txd *txd = to_pl08x_txd(tx); - unsigned long flags; - dma_cookie_t cookie; - - spin_lock_irqsave(&plchan->lock, flags); - cookie = dma_cookie_assign(tx); - - /* Put this onto the pending list */ - list_add_tail(&txd->node, &plchan->pend_list); - - /* - * If there was no physical channel available for this memcpy, - * stack the request up and indicate that the channel is waiting - * for a free physical channel. - */ - if (!plchan->slave && !plchan->phychan) { - /* Do this memcpy whenever there is a channel ready */ - plchan->state = PL08X_CHAN_WAITING; - plchan->waiting = txd; - } else { - plchan->phychan_hold--; - } - - spin_unlock_irqrestore(&plchan->lock, flags); - - return cookie; + /* Ensure all queued descriptors are freed */ + vchan_free_chan_resources(to_virt_chan(chan)); } static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt( @@ -968,23 +1138,53 @@ static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + struct virt_dma_desc *vd; + unsigned long flags; enum dma_status ret; + size_t bytes = 0; ret = dma_cookie_status(chan, cookie, txstate); if (ret == DMA_SUCCESS) return ret; + /* + * There's no point calculating the residue if there's + * no txstate to store the value. + */ + if (!txstate) { + if (plchan->state == PL08X_CHAN_PAUSED) + ret = DMA_PAUSED; + return ret; + } + + spin_lock_irqsave(&plchan->vc.lock, flags); + ret = dma_cookie_status(chan, cookie, txstate); + if (ret != DMA_SUCCESS) { + vd = vchan_find_desc(&plchan->vc, cookie); + if (vd) { + /* On the issued list, so hasn't been processed yet */ + struct pl08x_txd *txd = to_pl08x_txd(&vd->tx); + struct pl08x_sg *dsg; + + list_for_each_entry(dsg, &txd->dsg_list, node) + bytes += dsg->len; + } else { + bytes = pl08x_getbytes_chan(plchan); + } + } + spin_unlock_irqrestore(&plchan->vc.lock, flags); + /* * This cookie not complete yet * Get number of bytes left in the active transactions and queue */ - dma_set_residue(txstate, pl08x_getbytes_chan(plchan)); + dma_set_residue(txstate, bytes); - if (plchan->state == PL08X_CHAN_PAUSED) - return DMA_PAUSED; + if (plchan->state == PL08X_CHAN_PAUSED && ret == DMA_IN_PROGRESS) + ret = DMA_PAUSED; /* Whether waiting or running, we're in progress */ - return DMA_IN_PROGRESS; + return ret; } /* PrimeCell DMA extension */ @@ -1080,38 +1280,14 @@ static u32 pl08x_burst(u32 maxburst) return burst_sizes[i].reg; } -static int dma_set_runtime_config(struct dma_chan *chan, - struct dma_slave_config *config) +static u32 pl08x_get_cctl(struct pl08x_dma_chan *plchan, + enum dma_slave_buswidth addr_width, u32 maxburst) { - struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); - struct pl08x_driver_data *pl08x = plchan->host; - enum dma_slave_buswidth addr_width; - u32 width, burst, maxburst; - u32 cctl = 0; - - if (!plchan->slave) - return -EINVAL; - - /* Transfer direction */ - plchan->runtime_direction = config->direction; - if (config->direction == DMA_MEM_TO_DEV) { - addr_width = config->dst_addr_width; - maxburst = config->dst_maxburst; - } else if (config->direction == DMA_DEV_TO_MEM) { - addr_width = config->src_addr_width; - maxburst = config->src_maxburst; - } else { - dev_err(&pl08x->adev->dev, - "bad runtime_config: alien transfer direction\n"); - return -EINVAL; - } + u32 width, burst, cctl = 0; width = pl08x_width(addr_width); - if (width == ~0) { - dev_err(&pl08x->adev->dev, - "bad runtime_config: alien address width\n"); - return -EINVAL; - } + if (width == ~0) + return ~0; cctl |= width << PL080_CONTROL_SWIDTH_SHIFT; cctl |= width << PL080_CONTROL_DWIDTH_SHIFT; @@ -1128,28 +1304,23 @@ static int dma_set_runtime_config(struct dma_chan *chan, cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT; cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT; - plchan->device_fc = config->device_fc; + return pl08x_cctl(cctl); +} - if (plchan->runtime_direction == DMA_DEV_TO_MEM) { - plchan->src_addr = config->src_addr; - plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR | - pl08x_select_bus(plchan->cd->periph_buses, - pl08x->mem_buses); - } else { - plchan->dst_addr = config->dst_addr; - plchan->dst_cctl = pl08x_cctl(cctl) | PL080_CONTROL_SRC_INCR | - pl08x_select_bus(pl08x->mem_buses, - plchan->cd->periph_buses); - } +static int dma_set_runtime_config(struct dma_chan *chan, + struct dma_slave_config *config) +{ + struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); - dev_dbg(&pl08x->adev->dev, - "configured channel %s (%s) for %s, data width %d, " - "maxburst %d words, LE, CCTL=0x%08x\n", - dma_chan_name(chan), plchan->name, - (config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX", - addr_width, - maxburst, - cctl); + if (!plchan->slave) + return -EINVAL; + + /* Reject definitely invalid configurations */ + if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES || + config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) + return -EINVAL; + + plchan->cfg = *config; return 0; } @@ -1163,95 +1334,19 @@ static void pl08x_issue_pending(struct dma_chan *chan) struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); unsigned long flags; - spin_lock_irqsave(&plchan->lock, flags); - /* Something is already active, or we're waiting for a channel... */ - if (plchan->at || plchan->state == PL08X_CHAN_WAITING) { - spin_unlock_irqrestore(&plchan->lock, flags); - return; - } - - /* Take the first element in the queue and execute it */ - if (!list_empty(&plchan->pend_list)) { - struct pl08x_txd *next; - - next = list_first_entry(&plchan->pend_list, - struct pl08x_txd, - node); - list_del(&next->node); - plchan->state = PL08X_CHAN_RUNNING; - - pl08x_start_txd(plchan, next); + spin_lock_irqsave(&plchan->vc.lock, flags); + if (vchan_issue_pending(&plchan->vc)) { + if (!plchan->phychan && plchan->state != PL08X_CHAN_WAITING) + pl08x_phy_alloc_and_start(plchan); } - - spin_unlock_irqrestore(&plchan->lock, flags); -} - -static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, - struct pl08x_txd *txd) -{ - struct pl08x_driver_data *pl08x = plchan->host; - unsigned long flags; - int num_llis, ret; - - num_llis = pl08x_fill_llis_for_desc(pl08x, txd); - if (!num_llis) { - spin_lock_irqsave(&plchan->lock, flags); - pl08x_free_txd(pl08x, txd); - spin_unlock_irqrestore(&plchan->lock, flags); - return -EINVAL; - } - - spin_lock_irqsave(&plchan->lock, flags); - - /* - * See if we already have a physical channel allocated, - * else this is the time to try to get one. - */ - ret = prep_phy_channel(plchan, txd); - if (ret) { - /* - * No physical channel was available. - * - * memcpy transfers can be sorted out at submission time. - * - * Slave transfers may have been denied due to platform - * channel muxing restrictions. Since there is no guarantee - * that this will ever be resolved, and the signal must be - * acquired AFTER acquiring the physical channel, we will let - * them be NACK:ed with -EBUSY here. The drivers can retry - * the prep() call if they are eager on doing this using DMA. - */ - if (plchan->slave) { - pl08x_free_txd_list(pl08x, plchan); - pl08x_free_txd(pl08x, txd); - spin_unlock_irqrestore(&plchan->lock, flags); - return -EBUSY; - } - } else - /* - * Else we're all set, paused and ready to roll, status - * will switch to PL08X_CHAN_RUNNING when we call - * issue_pending(). If there is something running on the - * channel already we don't change its state. - */ - if (plchan->state == PL08X_CHAN_IDLE) - plchan->state = PL08X_CHAN_PAUSED; - - spin_unlock_irqrestore(&plchan->lock, flags); - - return 0; + spin_unlock_irqrestore(&plchan->vc.lock, flags); } -static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan, - unsigned long flags) +static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) { struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT); if (txd) { - dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); - txd->tx.flags = flags; - txd->tx.tx_submit = pl08x_tx_submit; - INIT_LIST_HEAD(&txd->node); INIT_LIST_HEAD(&txd->dsg_list); /* Always enable error and terminal interrupts */ @@ -1274,7 +1369,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( struct pl08x_sg *dsg; int ret; - txd = pl08x_get_txd(plchan, flags); + txd = pl08x_get_txd(plchan); if (!txd) { dev_err(&pl08x->adev->dev, "%s no memory for descriptor\n", __func__); @@ -1290,14 +1385,13 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( } list_add_tail(&dsg->node, &txd->dsg_list); - txd->direction = DMA_NONE; dsg->src_addr = src; dsg->dst_addr = dest; dsg->len = len; /* Set platform data for m2m */ txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; - txd->cctl = pl08x->pd->memcpy_channel.cctl & + txd->cctl = pl08x->pd->memcpy_channel.cctl_memcpy & ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2); /* Both to be incremented or the code will break */ @@ -1307,11 +1401,13 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( txd->cctl |= pl08x_select_bus(pl08x->mem_buses, pl08x->mem_buses); - ret = pl08x_prep_channel_resources(plchan, txd); - if (ret) + ret = pl08x_fill_llis_for_desc(plchan->host, txd); + if (!ret) { + pl08x_free_txd(pl08x, txd); return NULL; + } - return &txd->tx; + return vchan_tx_prep(&plchan->vc, &txd->vd, flags); } static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( @@ -1324,36 +1420,40 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct pl08x_txd *txd; struct pl08x_sg *dsg; struct scatterlist *sg; + enum dma_slave_buswidth addr_width; dma_addr_t slave_addr; int ret, tmp; + u8 src_buses, dst_buses; + u32 maxburst, cctl; dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", __func__, sg_dma_len(sgl), plchan->name); - txd = pl08x_get_txd(plchan, flags); + txd = pl08x_get_txd(plchan); if (!txd) { dev_err(&pl08x->adev->dev, "%s no txd\n", __func__); return NULL; } - if (direction != plchan->runtime_direction) - dev_err(&pl08x->adev->dev, "%s DMA setup does not match " - "the direction configured for the PrimeCell\n", - __func__); - /* * Set up addresses, the PrimeCell configured address * will take precedence since this may configure the * channel target address dynamically at runtime. */ - txd->direction = direction; - if (direction == DMA_MEM_TO_DEV) { - txd->cctl = plchan->dst_cctl; - slave_addr = plchan->dst_addr; + cctl = PL080_CONTROL_SRC_INCR; + slave_addr = plchan->cfg.dst_addr; + addr_width = plchan->cfg.dst_addr_width; + maxburst = plchan->cfg.dst_maxburst; + src_buses = pl08x->mem_buses; + dst_buses = plchan->cd->periph_buses; } else if (direction == DMA_DEV_TO_MEM) { - txd->cctl = plchan->src_cctl; - slave_addr = plchan->src_addr; + cctl = PL080_CONTROL_DST_INCR; + slave_addr = plchan->cfg.src_addr; + addr_width = plchan->cfg.src_addr_width; + maxburst = plchan->cfg.src_maxburst; + src_buses = plchan->cd->periph_buses; + dst_buses = pl08x->mem_buses; } else { pl08x_free_txd(pl08x, txd); dev_err(&pl08x->adev->dev, @@ -1361,7 +1461,17 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } - if (plchan->device_fc) + cctl |= pl08x_get_cctl(plchan, addr_width, maxburst); + if (cctl == ~0) { + pl08x_free_txd(pl08x, txd); + dev_err(&pl08x->adev->dev, + "DMA slave configuration botched?\n"); + return NULL; + } + + txd->cctl = cctl | pl08x_select_bus(src_buses, dst_buses); + + if (plchan->cfg.device_fc) tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER : PL080_FLOW_PER2MEM_PER; else @@ -1370,9 +1480,28 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT; + ret = pl08x_request_mux(plchan); + if (ret < 0) { + pl08x_free_txd(pl08x, txd); + dev_dbg(&pl08x->adev->dev, + "unable to mux for transfer on %s due to platform restrictions\n", + plchan->name); + return NULL; + } + + dev_dbg(&pl08x->adev->dev, "allocated DMA request signal %d for xfer on %s\n", + plchan->signal, plchan->name); + + /* Assign the flow control signal to this channel */ + if (direction == DMA_MEM_TO_DEV) + txd->ccfg |= plchan->signal << PL080_CONFIG_DST_SEL_SHIFT; + else + txd->ccfg |= plchan->signal << PL080_CONFIG_SRC_SEL_SHIFT; + for_each_sg(sgl, sg, sg_len, tmp) { dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT); if (!dsg) { + pl08x_release_mux(plchan); pl08x_free_txd(pl08x, txd); dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n", __func__); @@ -1390,11 +1519,14 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( } } - ret = pl08x_prep_channel_resources(plchan, txd); - if (ret) + ret = pl08x_fill_llis_for_desc(plchan->host, txd); + if (!ret) { + pl08x_release_mux(plchan); + pl08x_free_txd(pl08x, txd); return NULL; + } - return &txd->tx; + return vchan_tx_prep(&plchan->vc, &txd->vd, flags); } static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, @@ -1415,9 +1547,9 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * Anything succeeds on channels with no physical allocation and * no queued transfers. */ - spin_lock_irqsave(&plchan->lock, flags); + spin_lock_irqsave(&plchan->vc.lock, flags); if (!plchan->phychan && !plchan->at) { - spin_unlock_irqrestore(&plchan->lock, flags); + spin_unlock_irqrestore(&plchan->vc.lock, flags); return 0; } @@ -1426,18 +1558,15 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, plchan->state = PL08X_CHAN_IDLE; if (plchan->phychan) { - pl08x_terminate_phy_chan(pl08x, plchan->phychan); - /* * Mark physical channel as free and free any slave * signal */ - release_phy_channel(plchan); - plchan->phychan_hold = 0; + pl08x_phy_free(plchan); } /* Dequeue jobs and free LLIs */ if (plchan->at) { - pl08x_free_txd(pl08x, plchan->at); + pl08x_desc_free(&plchan->at->vd); plchan->at = NULL; } /* Dequeue jobs not yet fired as well */ @@ -1457,7 +1586,7 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, break; } - spin_unlock_irqrestore(&plchan->lock, flags); + spin_unlock_irqrestore(&plchan->vc.lock, flags); return ret; } @@ -1494,123 +1623,6 @@ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG); } -static void pl08x_unmap_buffers(struct pl08x_txd *txd) -{ - struct device *dev = txd->tx.chan->device->dev; - struct pl08x_sg *dsg; - - if (!(txd->tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - if (txd->tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_single(dev, dsg->src_addr, dsg->len, - DMA_TO_DEVICE); - else { - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_page(dev, dsg->src_addr, dsg->len, - DMA_TO_DEVICE); - } - } - if (!(txd->tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - if (txd->tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_single(dev, dsg->dst_addr, dsg->len, - DMA_FROM_DEVICE); - else - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_page(dev, dsg->dst_addr, dsg->len, - DMA_FROM_DEVICE); - } -} - -static void pl08x_tasklet(unsigned long data) -{ - struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data; - struct pl08x_driver_data *pl08x = plchan->host; - struct pl08x_txd *txd; - unsigned long flags; - - spin_lock_irqsave(&plchan->lock, flags); - - txd = plchan->at; - plchan->at = NULL; - - if (txd) { - /* Update last completed */ - dma_cookie_complete(&txd->tx); - } - - /* If a new descriptor is queued, set it up plchan->at is NULL here */ - if (!list_empty(&plchan->pend_list)) { - struct pl08x_txd *next; - - next = list_first_entry(&plchan->pend_list, - struct pl08x_txd, - node); - list_del(&next->node); - - pl08x_start_txd(plchan, next); - } else if (plchan->phychan_hold) { - /* - * This channel is still in use - we have a new txd being - * prepared and will soon be queued. Don't give up the - * physical channel. - */ - } else { - struct pl08x_dma_chan *waiting = NULL; - - /* - * No more jobs, so free up the physical channel - * Free any allocated signal on slave transfers too - */ - release_phy_channel(plchan); - plchan->state = PL08X_CHAN_IDLE; - - /* - * And NOW before anyone else can grab that free:d up - * physical channel, see if there is some memcpy pending - * that seriously needs to start because of being stacked - * up while we were choking the physical channels with data. - */ - list_for_each_entry(waiting, &pl08x->memcpy.channels, - chan.device_node) { - if (waiting->state == PL08X_CHAN_WAITING && - waiting->waiting != NULL) { - int ret; - - /* This should REALLY not fail now */ - ret = prep_phy_channel(waiting, - waiting->waiting); - BUG_ON(ret); - waiting->phychan_hold--; - waiting->state = PL08X_CHAN_RUNNING; - waiting->waiting = NULL; - pl08x_issue_pending(&waiting->chan); - break; - } - } - } - - spin_unlock_irqrestore(&plchan->lock, flags); - - if (txd) { - dma_async_tx_callback callback = txd->tx.callback; - void *callback_param = txd->tx.callback_param; - - /* Don't try to unmap buffers on slave channels */ - if (!plchan->slave) - pl08x_unmap_buffers(txd); - - /* Free the descriptor */ - spin_lock_irqsave(&plchan->lock, flags); - pl08x_free_txd(pl08x, txd); - spin_unlock_irqrestore(&plchan->lock, flags); - - /* Callback to signal completion */ - if (callback) - callback(callback_param); - } -} - static irqreturn_t pl08x_irq(int irq, void *dev) { struct pl08x_driver_data *pl08x = dev; @@ -1635,6 +1647,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev) /* Locate physical channel */ struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i]; struct pl08x_dma_chan *plchan = phychan->serving; + struct pl08x_txd *tx; if (!plchan) { dev_err(&pl08x->adev->dev, @@ -1643,8 +1656,29 @@ static irqreturn_t pl08x_irq(int irq, void *dev) continue; } - /* Schedule tasklet on this channel */ - tasklet_schedule(&plchan->tasklet); + spin_lock(&plchan->vc.lock); + tx = plchan->at; + if (tx) { + plchan->at = NULL; + /* + * This descriptor is done, release its mux + * reservation. + */ + pl08x_release_mux(plchan); + tx->done = true; + vchan_cookie_complete(&tx->vd); + + /* + * And start the next descriptor (if any), + * otherwise free this channel. + */ + if (vchan_next_desc(&plchan->vc)) + pl08x_start_next_txd(plchan); + else + pl08x_phy_free(plchan); + } + spin_unlock(&plchan->vc.lock); + mask |= (1 << i); } } @@ -1654,16 +1688,10 @@ static irqreturn_t pl08x_irq(int irq, void *dev) static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan) { - u32 cctl = pl08x_cctl(chan->cd->cctl); - chan->slave = true; chan->name = chan->cd->bus_id; - chan->src_addr = chan->cd->addr; - chan->dst_addr = chan->cd->addr; - chan->src_cctl = cctl | PL080_CONTROL_DST_INCR | - pl08x_select_bus(chan->cd->periph_buses, chan->host->mem_buses); - chan->dst_cctl = cctl | PL080_CONTROL_SRC_INCR | - pl08x_select_bus(chan->host->mem_buses, chan->cd->periph_buses); + chan->cfg.src_addr = chan->cd->addr; + chan->cfg.dst_addr = chan->cd->addr; } /* @@ -1693,6 +1721,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, chan->host = pl08x; chan->state = PL08X_CHAN_IDLE; + chan->signal = -1; if (slave) { chan->cd = &pl08x->pd->slave_channels[i]; @@ -1705,26 +1734,12 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, return -ENOMEM; } } - if (chan->cd->circular_buffer) { - dev_err(&pl08x->adev->dev, - "channel %s: circular buffers not supported\n", - chan->name); - kfree(chan); - continue; - } dev_dbg(&pl08x->adev->dev, "initialize virtual channel \"%s\"\n", chan->name); - chan->chan.device = dmadev; - dma_cookie_init(&chan->chan); - - spin_lock_init(&chan->lock); - INIT_LIST_HEAD(&chan->pend_list); - tasklet_init(&chan->tasklet, pl08x_tasklet, - (unsigned long) chan); - - list_add_tail(&chan->chan.device_node, &dmadev->channels); + chan->vc.desc_free = pl08x_desc_free; + vchan_init(&chan->vc, dmadev); } dev_info(&pl08x->adev->dev, "initialized %d virtual %s channels\n", i, slave ? "slave" : "memcpy"); @@ -1737,8 +1752,8 @@ static void pl08x_free_virtual_channels(struct dma_device *dmadev) struct pl08x_dma_chan *next; list_for_each_entry_safe(chan, - next, &dmadev->channels, chan.device_node) { - list_del(&chan->chan.device_node); + next, &dmadev->channels, vc.chan.device_node) { + list_del(&chan->vc.chan.device_node); kfree(chan); } } @@ -1791,7 +1806,7 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data) seq_printf(s, "\nPL08x virtual memcpy channels:\n"); seq_printf(s, "CHANNEL:\tSTATE:\n"); seq_printf(s, "--------\t------\n"); - list_for_each_entry(chan, &pl08x->memcpy.channels, chan.device_node) { + list_for_each_entry(chan, &pl08x->memcpy.channels, vc.chan.device_node) { seq_printf(s, "%s\t\t%s\n", chan->name, pl08x_state_str(chan->state)); } @@ -1799,7 +1814,7 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data) seq_printf(s, "\nPL08x virtual slave channels:\n"); seq_printf(s, "CHANNEL:\tSTATE:\n"); seq_printf(s, "--------\t------\n"); - list_for_each_entry(chan, &pl08x->slave.channels, chan.device_node) { + list_for_each_entry(chan, &pl08x->slave.channels, vc.chan.device_node) { seq_printf(s, "%s\t\t%s\n", chan->name, pl08x_state_str(chan->state)); } @@ -1851,9 +1866,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) goto out_no_pl08x; } - pm_runtime_set_active(&adev->dev); - pm_runtime_enable(&adev->dev); - /* Initialize memcpy engine */ dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask); pl08x->memcpy.dev = &adev->dev; @@ -1903,8 +1915,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) goto out_no_lli_pool; } - spin_lock_init(&pl08x->lock); - pl08x->base = ioremap(adev->res.start, resource_size(&adev->res)); if (!pl08x->base) { ret = -ENOMEM; @@ -1942,7 +1952,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) ch->id = i; ch->base = pl08x->base + PL080_Cx_BASE(i); spin_lock_init(&ch->lock); - ch->signal = -1; /* * Nomadik variants can have channels that are locked @@ -2007,7 +2016,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) amba_part(adev), amba_rev(adev), (unsigned long long)adev->res.start, adev->irq[0]); - pm_runtime_put(&adev->dev); return 0; out_no_slave_reg: @@ -2026,9 +2034,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) dma_pool_destroy(pl08x->pool); out_no_lli_pool: out_no_platdata: - pm_runtime_put(&adev->dev); - pm_runtime_disable(&adev->dev); - kfree(pl08x); out_no_pl08x: amba_release_regions(adev); diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 3934fcc4e00b1b02778bb02866fb86073f9b1f0a..7ab6e26664a77a1ab2b375148488d1209e2e21ba 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -661,7 +661,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, flags); if (unlikely(!atslave || !sg_len)) { - dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n"); + dev_dbg(chan2dev(chan), "prep_slave_sg: sg length is zero!\n"); return NULL; } @@ -689,6 +689,11 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, mem = sg_dma_address(sg); len = sg_dma_len(sg); + if (unlikely(!len)) { + dev_dbg(chan2dev(chan), + "prep_slave_sg: sg(%d) data length is zero\n", i); + goto err; + } mem_width = 2; if (unlikely(mem & 3 || len & 3)) mem_width = 0; @@ -724,6 +729,11 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, mem = sg_dma_address(sg); len = sg_dma_len(sg); + if (unlikely(!len)) { + dev_dbg(chan2dev(chan), + "prep_slave_sg: sg(%d) data length is zero\n", i); + goto err; + } mem_width = 2; if (unlikely(mem & 3 || len & 3)) mem_width = 0; @@ -757,6 +767,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, err_desc_get: dev_err(chan2dev(chan), "not enough descriptors available\n"); +err: atc_desc_put(atchan, first); return NULL; } diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index fcfeb3cd8d3170aff7c30d6d151a0e7e15ecd968..5084975d793cd25949e62ae68f5932bd3c456763 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -172,7 +172,8 @@ struct imxdma_engine { struct device_dma_parameters dma_parms; struct dma_device dma_device; void __iomem *base; - struct clk *dma_clk; + struct clk *dma_ahb; + struct clk *dma_ipg; spinlock_t lock; struct imx_dma_2d_config slots_2d[IMX_DMA_2D_SLOTS]; struct imxdma_channel channel[IMX_DMA_CHANNELS]; @@ -976,10 +977,20 @@ static int __init imxdma_probe(struct platform_device *pdev) return 0; } - imxdma->dma_clk = clk_get(NULL, "dma"); - if (IS_ERR(imxdma->dma_clk)) - return PTR_ERR(imxdma->dma_clk); - clk_enable(imxdma->dma_clk); + imxdma->dma_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(imxdma->dma_ipg)) { + ret = PTR_ERR(imxdma->dma_ipg); + goto err_clk; + } + + imxdma->dma_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(imxdma->dma_ahb)) { + ret = PTR_ERR(imxdma->dma_ahb); + goto err_clk; + } + + clk_prepare_enable(imxdma->dma_ipg); + clk_prepare_enable(imxdma->dma_ahb); /* reset DMA module */ imx_dmav1_writel(imxdma, DCR_DRST, DMA_DCR); @@ -988,16 +999,14 @@ static int __init imxdma_probe(struct platform_device *pdev) ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", imxdma); if (ret) { dev_warn(imxdma->dev, "Can't register IRQ for DMA\n"); - kfree(imxdma); - return ret; + goto err_enable; } ret = request_irq(MX1_DMA_ERR, imxdma_err_handler, 0, "DMA", imxdma); if (ret) { dev_warn(imxdma->dev, "Can't register ERRIRQ for DMA\n"); free_irq(MX1_DMA_INT, NULL); - kfree(imxdma); - return ret; + goto err_enable; } } @@ -1094,7 +1103,10 @@ static int __init imxdma_probe(struct platform_device *pdev) free_irq(MX1_DMA_INT, NULL); free_irq(MX1_DMA_ERR, NULL); } - +err_enable: + clk_disable_unprepare(imxdma->dma_ipg); + clk_disable_unprepare(imxdma->dma_ahb); +err_clk: kfree(imxdma); return ret; } @@ -1114,7 +1126,9 @@ static int __exit imxdma_remove(struct platform_device *pdev) free_irq(MX1_DMA_ERR, NULL); } - kfree(imxdma); + clk_disable_unprepare(imxdma->dma_ipg); + clk_disable_unprepare(imxdma->dma_ahb); + kfree(imxdma); return 0; } diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c new file mode 100644 index 0000000000000000000000000000000000000000..ae05618261373226d758192a03cda490581939a6 --- /dev/null +++ b/drivers/dma/omap-dma.c @@ -0,0 +1,669 @@ +/* + * OMAP DMAengine support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "virt-dma.h" +#include + +struct omap_dmadev { + struct dma_device ddev; + spinlock_t lock; + struct tasklet_struct task; + struct list_head pending; +}; + +struct omap_chan { + struct virt_dma_chan vc; + struct list_head node; + + struct dma_slave_config cfg; + unsigned dma_sig; + bool cyclic; + + int dma_ch; + struct omap_desc *desc; + unsigned sgidx; +}; + +struct omap_sg { + dma_addr_t addr; + uint32_t en; /* number of elements (24-bit) */ + uint32_t fn; /* number of frames (16-bit) */ +}; + +struct omap_desc { + struct virt_dma_desc vd; + enum dma_transfer_direction dir; + dma_addr_t dev_addr; + + int16_t fi; /* for OMAP_DMA_SYNC_PACKET */ + uint8_t es; /* OMAP_DMA_DATA_TYPE_xxx */ + uint8_t sync_mode; /* OMAP_DMA_SYNC_xxx */ + uint8_t sync_type; /* OMAP_DMA_xxx_SYNC* */ + uint8_t periph_port; /* Peripheral port */ + + unsigned sglen; + struct omap_sg sg[0]; +}; + +static const unsigned es_bytes[] = { + [OMAP_DMA_DATA_TYPE_S8] = 1, + [OMAP_DMA_DATA_TYPE_S16] = 2, + [OMAP_DMA_DATA_TYPE_S32] = 4, +}; + +static inline struct omap_dmadev *to_omap_dma_dev(struct dma_device *d) +{ + return container_of(d, struct omap_dmadev, ddev); +} + +static inline struct omap_chan *to_omap_dma_chan(struct dma_chan *c) +{ + return container_of(c, struct omap_chan, vc.chan); +} + +static inline struct omap_desc *to_omap_dma_desc(struct dma_async_tx_descriptor *t) +{ + return container_of(t, struct omap_desc, vd.tx); +} + +static void omap_dma_desc_free(struct virt_dma_desc *vd) +{ + kfree(container_of(vd, struct omap_desc, vd)); +} + +static void omap_dma_start_sg(struct omap_chan *c, struct omap_desc *d, + unsigned idx) +{ + struct omap_sg *sg = d->sg + idx; + + if (d->dir == DMA_DEV_TO_MEM) + omap_set_dma_dest_params(c->dma_ch, OMAP_DMA_PORT_EMIFF, + OMAP_DMA_AMODE_POST_INC, sg->addr, 0, 0); + else + omap_set_dma_src_params(c->dma_ch, OMAP_DMA_PORT_EMIFF, + OMAP_DMA_AMODE_POST_INC, sg->addr, 0, 0); + + omap_set_dma_transfer_params(c->dma_ch, d->es, sg->en, sg->fn, + d->sync_mode, c->dma_sig, d->sync_type); + + omap_start_dma(c->dma_ch); +} + +static void omap_dma_start_desc(struct omap_chan *c) +{ + struct virt_dma_desc *vd = vchan_next_desc(&c->vc); + struct omap_desc *d; + + if (!vd) { + c->desc = NULL; + return; + } + + list_del(&vd->node); + + c->desc = d = to_omap_dma_desc(&vd->tx); + c->sgidx = 0; + + if (d->dir == DMA_DEV_TO_MEM) + omap_set_dma_src_params(c->dma_ch, d->periph_port, + OMAP_DMA_AMODE_CONSTANT, d->dev_addr, 0, d->fi); + else + omap_set_dma_dest_params(c->dma_ch, d->periph_port, + OMAP_DMA_AMODE_CONSTANT, d->dev_addr, 0, d->fi); + + omap_dma_start_sg(c, d, 0); +} + +static void omap_dma_callback(int ch, u16 status, void *data) +{ + struct omap_chan *c = data; + struct omap_desc *d; + unsigned long flags; + + spin_lock_irqsave(&c->vc.lock, flags); + d = c->desc; + if (d) { + if (!c->cyclic) { + if (++c->sgidx < d->sglen) { + omap_dma_start_sg(c, d, c->sgidx); + } else { + omap_dma_start_desc(c); + vchan_cookie_complete(&d->vd); + } + } else { + vchan_cyclic_callback(&d->vd); + } + } + spin_unlock_irqrestore(&c->vc.lock, flags); +} + +/* + * This callback schedules all pending channels. We could be more + * clever here by postponing allocation of the real DMA channels to + * this point, and freeing them when our virtual channel becomes idle. + * + * We would then need to deal with 'all channels in-use' + */ +static void omap_dma_sched(unsigned long data) +{ + struct omap_dmadev *d = (struct omap_dmadev *)data; + LIST_HEAD(head); + + spin_lock_irq(&d->lock); + list_splice_tail_init(&d->pending, &head); + spin_unlock_irq(&d->lock); + + while (!list_empty(&head)) { + struct omap_chan *c = list_first_entry(&head, + struct omap_chan, node); + + spin_lock_irq(&c->vc.lock); + list_del_init(&c->node); + omap_dma_start_desc(c); + spin_unlock_irq(&c->vc.lock); + } +} + +static int omap_dma_alloc_chan_resources(struct dma_chan *chan) +{ + struct omap_chan *c = to_omap_dma_chan(chan); + + dev_info(c->vc.chan.device->dev, "allocating channel for %u\n", c->dma_sig); + + return omap_request_dma(c->dma_sig, "DMA engine", + omap_dma_callback, c, &c->dma_ch); +} + +static void omap_dma_free_chan_resources(struct dma_chan *chan) +{ + struct omap_chan *c = to_omap_dma_chan(chan); + + vchan_free_chan_resources(&c->vc); + omap_free_dma(c->dma_ch); + + dev_info(c->vc.chan.device->dev, "freeing channel for %u\n", c->dma_sig); +} + +static size_t omap_dma_sg_size(struct omap_sg *sg) +{ + return sg->en * sg->fn; +} + +static size_t omap_dma_desc_size(struct omap_desc *d) +{ + unsigned i; + size_t size; + + for (size = i = 0; i < d->sglen; i++) + size += omap_dma_sg_size(&d->sg[i]); + + return size * es_bytes[d->es]; +} + +static size_t omap_dma_desc_size_pos(struct omap_desc *d, dma_addr_t addr) +{ + unsigned i; + size_t size, es_size = es_bytes[d->es]; + + for (size = i = 0; i < d->sglen; i++) { + size_t this_size = omap_dma_sg_size(&d->sg[i]) * es_size; + + if (size) + size += this_size; + else if (addr >= d->sg[i].addr && + addr < d->sg[i].addr + this_size) + size += d->sg[i].addr + this_size - addr; + } + return size; +} + +static enum dma_status omap_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *txstate) +{ + struct omap_chan *c = to_omap_dma_chan(chan); + struct virt_dma_desc *vd; + enum dma_status ret; + unsigned long flags; + + ret = dma_cookie_status(chan, cookie, txstate); + if (ret == DMA_SUCCESS || !txstate) + return ret; + + spin_lock_irqsave(&c->vc.lock, flags); + vd = vchan_find_desc(&c->vc, cookie); + if (vd) { + txstate->residue = omap_dma_desc_size(to_omap_dma_desc(&vd->tx)); + } else if (c->desc && c->desc->vd.tx.cookie == cookie) { + struct omap_desc *d = c->desc; + dma_addr_t pos; + + if (d->dir == DMA_MEM_TO_DEV) + pos = omap_get_dma_src_pos(c->dma_ch); + else if (d->dir == DMA_DEV_TO_MEM) + pos = omap_get_dma_dst_pos(c->dma_ch); + else + pos = 0; + + txstate->residue = omap_dma_desc_size_pos(d, pos); + } else { + txstate->residue = 0; + } + spin_unlock_irqrestore(&c->vc.lock, flags); + + return ret; +} + +static void omap_dma_issue_pending(struct dma_chan *chan) +{ + struct omap_chan *c = to_omap_dma_chan(chan); + unsigned long flags; + + spin_lock_irqsave(&c->vc.lock, flags); + if (vchan_issue_pending(&c->vc) && !c->desc) { + struct omap_dmadev *d = to_omap_dma_dev(chan->device); + spin_lock(&d->lock); + if (list_empty(&c->node)) + list_add_tail(&c->node, &d->pending); + spin_unlock(&d->lock); + tasklet_schedule(&d->task); + } + spin_unlock_irqrestore(&c->vc.lock, flags); +} + +static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sgl, unsigned sglen, + enum dma_transfer_direction dir, unsigned long tx_flags, void *context) +{ + struct omap_chan *c = to_omap_dma_chan(chan); + enum dma_slave_buswidth dev_width; + struct scatterlist *sgent; + struct omap_desc *d; + dma_addr_t dev_addr; + unsigned i, j = 0, es, en, frame_bytes, sync_type; + u32 burst; + + if (dir == DMA_DEV_TO_MEM) { + dev_addr = c->cfg.src_addr; + dev_width = c->cfg.src_addr_width; + burst = c->cfg.src_maxburst; + sync_type = OMAP_DMA_SRC_SYNC; + } else if (dir == DMA_MEM_TO_DEV) { + dev_addr = c->cfg.dst_addr; + dev_width = c->cfg.dst_addr_width; + burst = c->cfg.dst_maxburst; + sync_type = OMAP_DMA_DST_SYNC; + } else { + dev_err(chan->device->dev, "%s: bad direction?\n", __func__); + return NULL; + } + + /* Bus width translates to the element size (ES) */ + switch (dev_width) { + case DMA_SLAVE_BUSWIDTH_1_BYTE: + es = OMAP_DMA_DATA_TYPE_S8; + break; + case DMA_SLAVE_BUSWIDTH_2_BYTES: + es = OMAP_DMA_DATA_TYPE_S16; + break; + case DMA_SLAVE_BUSWIDTH_4_BYTES: + es = OMAP_DMA_DATA_TYPE_S32; + break; + default: /* not reached */ + return NULL; + } + + /* Now allocate and setup the descriptor. */ + d = kzalloc(sizeof(*d) + sglen * sizeof(d->sg[0]), GFP_ATOMIC); + if (!d) + return NULL; + + d->dir = dir; + d->dev_addr = dev_addr; + d->es = es; + d->sync_mode = OMAP_DMA_SYNC_FRAME; + d->sync_type = sync_type; + d->periph_port = OMAP_DMA_PORT_TIPB; + + /* + * Build our scatterlist entries: each contains the address, + * the number of elements (EN) in each frame, and the number of + * frames (FN). Number of bytes for this entry = ES * EN * FN. + * + * Burst size translates to number of elements with frame sync. + * Note: DMA engine defines burst to be the number of dev-width + * transfers. + */ + en = burst; + frame_bytes = es_bytes[es] * en; + for_each_sg(sgl, sgent, sglen, i) { + d->sg[j].addr = sg_dma_address(sgent); + d->sg[j].en = en; + d->sg[j].fn = sg_dma_len(sgent) / frame_bytes; + j++; + } + + d->sglen = j; + + return vchan_tx_prep(&c->vc, &d->vd, tx_flags); +} + +static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_transfer_direction dir, void *context) +{ + struct omap_chan *c = to_omap_dma_chan(chan); + enum dma_slave_buswidth dev_width; + struct omap_desc *d; + dma_addr_t dev_addr; + unsigned es, sync_type; + u32 burst; + + if (dir == DMA_DEV_TO_MEM) { + dev_addr = c->cfg.src_addr; + dev_width = c->cfg.src_addr_width; + burst = c->cfg.src_maxburst; + sync_type = OMAP_DMA_SRC_SYNC; + } else if (dir == DMA_MEM_TO_DEV) { + dev_addr = c->cfg.dst_addr; + dev_width = c->cfg.dst_addr_width; + burst = c->cfg.dst_maxburst; + sync_type = OMAP_DMA_DST_SYNC; + } else { + dev_err(chan->device->dev, "%s: bad direction?\n", __func__); + return NULL; + } + + /* Bus width translates to the element size (ES) */ + switch (dev_width) { + case DMA_SLAVE_BUSWIDTH_1_BYTE: + es = OMAP_DMA_DATA_TYPE_S8; + break; + case DMA_SLAVE_BUSWIDTH_2_BYTES: + es = OMAP_DMA_DATA_TYPE_S16; + break; + case DMA_SLAVE_BUSWIDTH_4_BYTES: + es = OMAP_DMA_DATA_TYPE_S32; + break; + default: /* not reached */ + return NULL; + } + + /* Now allocate and setup the descriptor. */ + d = kzalloc(sizeof(*d) + sizeof(d->sg[0]), GFP_ATOMIC); + if (!d) + return NULL; + + d->dir = dir; + d->dev_addr = dev_addr; + d->fi = burst; + d->es = es; + d->sync_mode = OMAP_DMA_SYNC_PACKET; + d->sync_type = sync_type; + d->periph_port = OMAP_DMA_PORT_MPUI; + d->sg[0].addr = buf_addr; + d->sg[0].en = period_len / es_bytes[es]; + d->sg[0].fn = buf_len / period_len; + d->sglen = 1; + + if (!c->cyclic) { + c->cyclic = true; + omap_dma_link_lch(c->dma_ch, c->dma_ch); + omap_enable_dma_irq(c->dma_ch, OMAP_DMA_FRAME_IRQ); + omap_disable_dma_irq(c->dma_ch, OMAP_DMA_BLOCK_IRQ); + } + + if (!cpu_class_is_omap1()) { + omap_set_dma_src_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16); + omap_set_dma_dest_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16); + } + + return vchan_tx_prep(&c->vc, &d->vd, DMA_CTRL_ACK | DMA_PREP_INTERRUPT); +} + +static int omap_dma_slave_config(struct omap_chan *c, struct dma_slave_config *cfg) +{ + if (cfg->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES || + cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) + return -EINVAL; + + memcpy(&c->cfg, cfg, sizeof(c->cfg)); + + return 0; +} + +static int omap_dma_terminate_all(struct omap_chan *c) +{ + struct omap_dmadev *d = to_omap_dma_dev(c->vc.chan.device); + unsigned long flags; + LIST_HEAD(head); + + spin_lock_irqsave(&c->vc.lock, flags); + + /* Prevent this channel being scheduled */ + spin_lock(&d->lock); + list_del_init(&c->node); + spin_unlock(&d->lock); + + /* + * Stop DMA activity: we assume the callback will not be called + * after omap_stop_dma() returns (even if it does, it will see + * c->desc is NULL and exit.) + */ + if (c->desc) { + c->desc = NULL; + omap_stop_dma(c->dma_ch); + } + + if (c->cyclic) { + c->cyclic = false; + omap_dma_unlink_lch(c->dma_ch, c->dma_ch); + } + + vchan_get_all_descriptors(&c->vc, &head); + spin_unlock_irqrestore(&c->vc.lock, flags); + vchan_dma_desc_free_list(&c->vc, &head); + + return 0; +} + +static int omap_dma_pause(struct omap_chan *c) +{ + /* FIXME: not supported by platform private API */ + return -EINVAL; +} + +static int omap_dma_resume(struct omap_chan *c) +{ + /* FIXME: not supported by platform private API */ + return -EINVAL; +} + +static int omap_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct omap_chan *c = to_omap_dma_chan(chan); + int ret; + + switch (cmd) { + case DMA_SLAVE_CONFIG: + ret = omap_dma_slave_config(c, (struct dma_slave_config *)arg); + break; + + case DMA_TERMINATE_ALL: + ret = omap_dma_terminate_all(c); + break; + + case DMA_PAUSE: + ret = omap_dma_pause(c); + break; + + case DMA_RESUME: + ret = omap_dma_resume(c); + break; + + default: + ret = -ENXIO; + break; + } + + return ret; +} + +static int omap_dma_chan_init(struct omap_dmadev *od, int dma_sig) +{ + struct omap_chan *c; + + c = kzalloc(sizeof(*c), GFP_KERNEL); + if (!c) + return -ENOMEM; + + c->dma_sig = dma_sig; + c->vc.desc_free = omap_dma_desc_free; + vchan_init(&c->vc, &od->ddev); + INIT_LIST_HEAD(&c->node); + + od->ddev.chancnt++; + + return 0; +} + +static void omap_dma_free(struct omap_dmadev *od) +{ + tasklet_kill(&od->task); + while (!list_empty(&od->ddev.channels)) { + struct omap_chan *c = list_first_entry(&od->ddev.channels, + struct omap_chan, vc.chan.device_node); + + list_del(&c->vc.chan.device_node); + tasklet_kill(&c->vc.task); + kfree(c); + } + kfree(od); +} + +static int omap_dma_probe(struct platform_device *pdev) +{ + struct omap_dmadev *od; + int rc, i; + + od = kzalloc(sizeof(*od), GFP_KERNEL); + if (!od) + return -ENOMEM; + + dma_cap_set(DMA_SLAVE, od->ddev.cap_mask); + dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask); + od->ddev.device_alloc_chan_resources = omap_dma_alloc_chan_resources; + od->ddev.device_free_chan_resources = omap_dma_free_chan_resources; + od->ddev.device_tx_status = omap_dma_tx_status; + od->ddev.device_issue_pending = omap_dma_issue_pending; + od->ddev.device_prep_slave_sg = omap_dma_prep_slave_sg; + od->ddev.device_prep_dma_cyclic = omap_dma_prep_dma_cyclic; + od->ddev.device_control = omap_dma_control; + od->ddev.dev = &pdev->dev; + INIT_LIST_HEAD(&od->ddev.channels); + INIT_LIST_HEAD(&od->pending); + spin_lock_init(&od->lock); + + tasklet_init(&od->task, omap_dma_sched, (unsigned long)od); + + for (i = 0; i < 127; i++) { + rc = omap_dma_chan_init(od, i); + if (rc) { + omap_dma_free(od); + return rc; + } + } + + rc = dma_async_device_register(&od->ddev); + if (rc) { + pr_warn("OMAP-DMA: failed to register slave DMA engine device: %d\n", + rc); + omap_dma_free(od); + } else { + platform_set_drvdata(pdev, od); + } + + dev_info(&pdev->dev, "OMAP DMA engine driver\n"); + + return rc; +} + +static int omap_dma_remove(struct platform_device *pdev) +{ + struct omap_dmadev *od = platform_get_drvdata(pdev); + + dma_async_device_unregister(&od->ddev); + omap_dma_free(od); + + return 0; +} + +static struct platform_driver omap_dma_driver = { + .probe = omap_dma_probe, + .remove = omap_dma_remove, + .driver = { + .name = "omap-dma-engine", + .owner = THIS_MODULE, + }, +}; + +bool omap_dma_filter_fn(struct dma_chan *chan, void *param) +{ + if (chan->device->dev->driver == &omap_dma_driver.driver) { + struct omap_chan *c = to_omap_dma_chan(chan); + unsigned req = *(unsigned *)param; + + return req == c->dma_sig; + } + return false; +} +EXPORT_SYMBOL_GPL(omap_dma_filter_fn); + +static struct platform_device *pdev; + +static const struct platform_device_info omap_dma_dev_info = { + .name = "omap-dma-engine", + .id = -1, + .dma_mask = DMA_BIT_MASK(32), +}; + +static int omap_dma_init(void) +{ + int rc = platform_driver_register(&omap_dma_driver); + + if (rc == 0) { + pdev = platform_device_register_full(&omap_dma_dev_info); + if (IS_ERR(pdev)) { + platform_driver_unregister(&omap_dma_driver); + rc = PTR_ERR(pdev); + } + } + return rc; +} +subsys_initcall(omap_dma_init); + +static void __exit omap_dma_exit(void) +{ + platform_device_unregister(pdev); + platform_driver_unregister(&omap_dma_driver); +} +module_exit(omap_dma_exit); + +MODULE_AUTHOR("Russell King"); +MODULE_LICENSE("GPL"); diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index e4feba6b03c00e6f2ae412a9a1104eef21fb94f4..f5843bc80baa9b8168f6034ad167ce46a0d537bb 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -1567,17 +1567,19 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r) goto xfer_exit; } - /* Prefer Secure Channel */ - if (!_manager_ns(thrd)) - r->cfg->nonsecure = 0; - else - r->cfg->nonsecure = 1; /* Use last settings, if not provided */ - if (r->cfg) + if (r->cfg) { + /* Prefer Secure Channel */ + if (!_manager_ns(thrd)) + r->cfg->nonsecure = 0; + else + r->cfg->nonsecure = 1; + ccr = _prepare_ccr(r->cfg); - else + } else { ccr = readl(regs + CC(thrd->id)); + } /* If this req doesn't have valid xfer settings */ if (!_is_valid(ccr)) { @@ -2928,6 +2930,11 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) num_chan = max_t(int, pi->pcfg.num_peri, pi->pcfg.num_chan); pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL); + if (!pdmac->peripherals) { + ret = -ENOMEM; + dev_err(&adev->dev, "unable to allocate pdmac->peripherals\n"); + goto probe_err5; + } for (i = 0; i < num_chan; i++) { pch = &pdmac->peripherals[i]; diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c index ec78ccef91325c46dfb4098433da5de42007cc32..f5a73606217ee6118f9562e5f49b34338691611e 100644 --- a/drivers/dma/sa11x0-dma.c +++ b/drivers/dma/sa11x0-dma.c @@ -21,6 +21,8 @@ #include #include +#include "virt-dma.h" + #define NR_PHY_CHAN 6 #define DMA_ALIGN 3 #define DMA_MAX_SIZE 0x1fff @@ -72,12 +74,13 @@ struct sa11x0_dma_sg { }; struct sa11x0_dma_desc { - struct dma_async_tx_descriptor tx; + struct virt_dma_desc vd; + u32 ddar; size_t size; + unsigned period; + bool cyclic; - /* maybe protected by c->lock */ - struct list_head node; unsigned sglen; struct sa11x0_dma_sg sg[0]; }; @@ -85,15 +88,11 @@ struct sa11x0_dma_desc { struct sa11x0_dma_phy; struct sa11x0_dma_chan { - struct dma_chan chan; - spinlock_t lock; - dma_cookie_t lc; + struct virt_dma_chan vc; - /* protected by c->lock */ + /* protected by c->vc.lock */ struct sa11x0_dma_phy *phy; enum dma_status status; - struct list_head desc_submitted; - struct list_head desc_issued; /* protected by d->lock */ struct list_head node; @@ -109,7 +108,7 @@ struct sa11x0_dma_phy { struct sa11x0_dma_chan *vchan; - /* Protected by c->lock */ + /* Protected by c->vc.lock */ unsigned sg_load; struct sa11x0_dma_desc *txd_load; unsigned sg_done; @@ -127,13 +126,12 @@ struct sa11x0_dma_dev { spinlock_t lock; struct tasklet_struct task; struct list_head chan_pending; - struct list_head desc_complete; struct sa11x0_dma_phy phy[NR_PHY_CHAN]; }; static struct sa11x0_dma_chan *to_sa11x0_dma_chan(struct dma_chan *chan) { - return container_of(chan, struct sa11x0_dma_chan, chan); + return container_of(chan, struct sa11x0_dma_chan, vc.chan); } static struct sa11x0_dma_dev *to_sa11x0_dma(struct dma_device *dmadev) @@ -141,27 +139,26 @@ static struct sa11x0_dma_dev *to_sa11x0_dma(struct dma_device *dmadev) return container_of(dmadev, struct sa11x0_dma_dev, slave); } -static struct sa11x0_dma_desc *to_sa11x0_dma_tx(struct dma_async_tx_descriptor *tx) +static struct sa11x0_dma_desc *sa11x0_dma_next_desc(struct sa11x0_dma_chan *c) { - return container_of(tx, struct sa11x0_dma_desc, tx); + struct virt_dma_desc *vd = vchan_next_desc(&c->vc); + + return vd ? container_of(vd, struct sa11x0_dma_desc, vd) : NULL; } -static struct sa11x0_dma_desc *sa11x0_dma_next_desc(struct sa11x0_dma_chan *c) +static void sa11x0_dma_free_desc(struct virt_dma_desc *vd) { - if (list_empty(&c->desc_issued)) - return NULL; - - return list_first_entry(&c->desc_issued, struct sa11x0_dma_desc, node); + kfree(container_of(vd, struct sa11x0_dma_desc, vd)); } static void sa11x0_dma_start_desc(struct sa11x0_dma_phy *p, struct sa11x0_dma_desc *txd) { - list_del(&txd->node); + list_del(&txd->vd.node); p->txd_load = txd; p->sg_load = 0; dev_vdbg(p->dev->slave.dev, "pchan %u: txd %p[%x]: starting: DDAR:%x\n", - p->num, txd, txd->tx.cookie, txd->ddar); + p->num, &txd->vd, txd->vd.tx.cookie, txd->ddar); } static void noinline sa11x0_dma_start_sg(struct sa11x0_dma_phy *p, @@ -183,19 +180,24 @@ static void noinline sa11x0_dma_start_sg(struct sa11x0_dma_phy *p, return; if (p->sg_load == txd->sglen) { - struct sa11x0_dma_desc *txn = sa11x0_dma_next_desc(c); + if (!txd->cyclic) { + struct sa11x0_dma_desc *txn = sa11x0_dma_next_desc(c); - /* - * We have reached the end of the current descriptor. - * Peek at the next descriptor, and if compatible with - * the current, start processing it. - */ - if (txn && txn->ddar == txd->ddar) { - txd = txn; - sa11x0_dma_start_desc(p, txn); + /* + * We have reached the end of the current descriptor. + * Peek at the next descriptor, and if compatible with + * the current, start processing it. + */ + if (txn && txn->ddar == txd->ddar) { + txd = txn; + sa11x0_dma_start_desc(p, txn); + } else { + p->txd_load = NULL; + return; + } } else { - p->txd_load = NULL; - return; + /* Cyclic: reset back to beginning */ + p->sg_load = 0; } } @@ -229,21 +231,21 @@ static void noinline sa11x0_dma_complete(struct sa11x0_dma_phy *p, struct sa11x0_dma_desc *txd = p->txd_done; if (++p->sg_done == txd->sglen) { - struct sa11x0_dma_dev *d = p->dev; - - dev_vdbg(d->slave.dev, "pchan %u: txd %p[%x]: completed\n", - p->num, p->txd_done, p->txd_done->tx.cookie); - - c->lc = txd->tx.cookie; + if (!txd->cyclic) { + vchan_cookie_complete(&txd->vd); - spin_lock(&d->lock); - list_add_tail(&txd->node, &d->desc_complete); - spin_unlock(&d->lock); + p->sg_done = 0; + p->txd_done = p->txd_load; - p->sg_done = 0; - p->txd_done = p->txd_load; + if (!p->txd_done) + tasklet_schedule(&p->dev->task); + } else { + if ((p->sg_done % txd->period) == 0) + vchan_cyclic_callback(&txd->vd); - tasklet_schedule(&d->task); + /* Cyclic: reset back to beginning */ + p->sg_done = 0; + } } sa11x0_dma_start_sg(p, c); @@ -280,7 +282,7 @@ static irqreturn_t sa11x0_dma_irq(int irq, void *dev_id) if (c) { unsigned long flags; - spin_lock_irqsave(&c->lock, flags); + spin_lock_irqsave(&c->vc.lock, flags); /* * Now that we're holding the lock, check that the vchan * really is associated with this pchan before touching the @@ -294,7 +296,7 @@ static irqreturn_t sa11x0_dma_irq(int irq, void *dev_id) if (dcsr & DCSR_DONEB) sa11x0_dma_complete(p, c); } - spin_unlock_irqrestore(&c->lock, flags); + spin_unlock_irqrestore(&c->vc.lock, flags); } return IRQ_HANDLED; @@ -332,28 +334,15 @@ static void sa11x0_dma_tasklet(unsigned long arg) struct sa11x0_dma_dev *d = (struct sa11x0_dma_dev *)arg; struct sa11x0_dma_phy *p; struct sa11x0_dma_chan *c; - struct sa11x0_dma_desc *txd, *txn; - LIST_HEAD(head); unsigned pch, pch_alloc = 0; dev_dbg(d->slave.dev, "tasklet enter\n"); - /* Get the completed tx descriptors */ - spin_lock_irq(&d->lock); - list_splice_init(&d->desc_complete, &head); - spin_unlock_irq(&d->lock); - - list_for_each_entry(txd, &head, node) { - c = to_sa11x0_dma_chan(txd->tx.chan); - - dev_dbg(d->slave.dev, "vchan %p: txd %p[%x] completed\n", - c, txd, txd->tx.cookie); - - spin_lock_irq(&c->lock); + list_for_each_entry(c, &d->slave.channels, vc.chan.device_node) { + spin_lock_irq(&c->vc.lock); p = c->phy; - if (p) { - if (!p->txd_done) - sa11x0_dma_start_txd(c); + if (p && !p->txd_done) { + sa11x0_dma_start_txd(c); if (!p->txd_done) { /* No current txd associated with this channel */ dev_dbg(d->slave.dev, "pchan %u: free\n", p->num); @@ -363,7 +352,7 @@ static void sa11x0_dma_tasklet(unsigned long arg) p->vchan = NULL; } } - spin_unlock_irq(&c->lock); + spin_unlock_irq(&c->vc.lock); } spin_lock_irq(&d->lock); @@ -380,7 +369,7 @@ static void sa11x0_dma_tasklet(unsigned long arg) /* Mark this channel allocated */ p->vchan = c; - dev_dbg(d->slave.dev, "pchan %u: alloc vchan %p\n", pch, c); + dev_dbg(d->slave.dev, "pchan %u: alloc vchan %p\n", pch, &c->vc); } } spin_unlock_irq(&d->lock); @@ -390,42 +379,18 @@ static void sa11x0_dma_tasklet(unsigned long arg) p = &d->phy[pch]; c = p->vchan; - spin_lock_irq(&c->lock); + spin_lock_irq(&c->vc.lock); c->phy = p; sa11x0_dma_start_txd(c); - spin_unlock_irq(&c->lock); + spin_unlock_irq(&c->vc.lock); } } - /* Now free the completed tx descriptor, and call their callbacks */ - list_for_each_entry_safe(txd, txn, &head, node) { - dma_async_tx_callback callback = txd->tx.callback; - void *callback_param = txd->tx.callback_param; - - dev_dbg(d->slave.dev, "txd %p[%x]: callback and free\n", - txd, txd->tx.cookie); - - kfree(txd); - - if (callback) - callback(callback_param); - } - dev_dbg(d->slave.dev, "tasklet exit\n"); } -static void sa11x0_dma_desc_free(struct sa11x0_dma_dev *d, struct list_head *head) -{ - struct sa11x0_dma_desc *txd, *txn; - - list_for_each_entry_safe(txd, txn, head, node) { - dev_dbg(d->slave.dev, "txd %p: freeing\n", txd); - kfree(txd); - } -} - static int sa11x0_dma_alloc_chan_resources(struct dma_chan *chan) { return 0; @@ -436,18 +401,12 @@ static void sa11x0_dma_free_chan_resources(struct dma_chan *chan) struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); unsigned long flags; - LIST_HEAD(head); - spin_lock_irqsave(&c->lock, flags); - spin_lock(&d->lock); + spin_lock_irqsave(&d->lock, flags); list_del_init(&c->node); - spin_unlock(&d->lock); - - list_splice_tail_init(&c->desc_submitted, &head); - list_splice_tail_init(&c->desc_issued, &head); - spin_unlock_irqrestore(&c->lock, flags); + spin_unlock_irqrestore(&d->lock, flags); - sa11x0_dma_desc_free(d, &head); + vchan_free_chan_resources(&c->vc); } static dma_addr_t sa11x0_dma_pos(struct sa11x0_dma_phy *p) @@ -472,33 +431,47 @@ static enum dma_status sa11x0_dma_tx_status(struct dma_chan *chan, struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); struct sa11x0_dma_phy *p; - struct sa11x0_dma_desc *txd; - dma_cookie_t last_used, last_complete; + struct virt_dma_desc *vd; unsigned long flags; enum dma_status ret; - size_t bytes = 0; - - last_used = c->chan.cookie; - last_complete = c->lc; - ret = dma_async_is_complete(cookie, last_complete, last_used); - if (ret == DMA_SUCCESS) { - dma_set_tx_state(state, last_complete, last_used, 0); + ret = dma_cookie_status(&c->vc.chan, cookie, state); + if (ret == DMA_SUCCESS) return ret; - } - spin_lock_irqsave(&c->lock, flags); + if (!state) + return c->status; + + spin_lock_irqsave(&c->vc.lock, flags); p = c->phy; - ret = c->status; - if (p) { - dma_addr_t addr = sa11x0_dma_pos(p); - dev_vdbg(d->slave.dev, "tx_status: addr:%x\n", addr); + /* + * If the cookie is on our issue queue, then the residue is + * its total size. + */ + vd = vchan_find_desc(&c->vc, cookie); + if (vd) { + state->residue = container_of(vd, struct sa11x0_dma_desc, vd)->size; + } else if (!p) { + state->residue = 0; + } else { + struct sa11x0_dma_desc *txd; + size_t bytes = 0; - txd = p->txd_done; + if (p->txd_done && p->txd_done->vd.tx.cookie == cookie) + txd = p->txd_done; + else if (p->txd_load && p->txd_load->vd.tx.cookie == cookie) + txd = p->txd_load; + else + txd = NULL; + + ret = c->status; if (txd) { + dma_addr_t addr = sa11x0_dma_pos(p); unsigned i; + dev_vdbg(d->slave.dev, "tx_status: addr:%x\n", addr); + for (i = 0; i < txd->sglen; i++) { dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x\n", i, txd->sg[i].addr, txd->sg[i].len); @@ -521,17 +494,11 @@ static enum dma_status sa11x0_dma_tx_status(struct dma_chan *chan, bytes += txd->sg[i].len; } } - if (txd != p->txd_load && p->txd_load) - bytes += p->txd_load->size; - } - list_for_each_entry(txd, &c->desc_issued, node) { - bytes += txd->size; + state->residue = bytes; } - spin_unlock_irqrestore(&c->lock, flags); - - dma_set_tx_state(state, last_complete, last_used, bytes); + spin_unlock_irqrestore(&c->vc.lock, flags); - dev_vdbg(d->slave.dev, "tx_status: bytes 0x%zx\n", bytes); + dev_vdbg(d->slave.dev, "tx_status: bytes 0x%zx\n", state->residue); return ret; } @@ -547,40 +514,20 @@ static void sa11x0_dma_issue_pending(struct dma_chan *chan) struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); unsigned long flags; - spin_lock_irqsave(&c->lock, flags); - list_splice_tail_init(&c->desc_submitted, &c->desc_issued); - if (!list_empty(&c->desc_issued)) { - spin_lock(&d->lock); - if (!c->phy && list_empty(&c->node)) { - list_add_tail(&c->node, &d->chan_pending); - tasklet_schedule(&d->task); - dev_dbg(d->slave.dev, "vchan %p: issued\n", c); + spin_lock_irqsave(&c->vc.lock, flags); + if (vchan_issue_pending(&c->vc)) { + if (!c->phy) { + spin_lock(&d->lock); + if (list_empty(&c->node)) { + list_add_tail(&c->node, &d->chan_pending); + tasklet_schedule(&d->task); + dev_dbg(d->slave.dev, "vchan %p: issued\n", &c->vc); + } + spin_unlock(&d->lock); } - spin_unlock(&d->lock); } else - dev_dbg(d->slave.dev, "vchan %p: nothing to issue\n", c); - spin_unlock_irqrestore(&c->lock, flags); -} - -static dma_cookie_t sa11x0_dma_tx_submit(struct dma_async_tx_descriptor *tx) -{ - struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(tx->chan); - struct sa11x0_dma_desc *txd = to_sa11x0_dma_tx(tx); - unsigned long flags; - - spin_lock_irqsave(&c->lock, flags); - c->chan.cookie += 1; - if (c->chan.cookie < 0) - c->chan.cookie = 1; - txd->tx.cookie = c->chan.cookie; - - list_add_tail(&txd->node, &c->desc_submitted); - spin_unlock_irqrestore(&c->lock, flags); - - dev_dbg(tx->chan->device->dev, "vchan %p: txd %p[%x]: submitted\n", - c, txd, txd->tx.cookie); - - return txd->tx.cookie; + dev_dbg(d->slave.dev, "vchan %p: nothing to issue\n", &c->vc); + spin_unlock_irqrestore(&c->vc.lock, flags); } static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg( @@ -596,7 +543,7 @@ static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg( /* SA11x0 channels can only operate in their native direction */ if (dir != (c->ddar & DDAR_RW ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV)) { dev_err(chan->device->dev, "vchan %p: bad DMA direction: DDAR:%08x dir:%u\n", - c, c->ddar, dir); + &c->vc, c->ddar, dir); return NULL; } @@ -612,14 +559,14 @@ static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg( j += DIV_ROUND_UP(len, DMA_MAX_SIZE & ~DMA_ALIGN) - 1; if (addr & DMA_ALIGN) { dev_dbg(chan->device->dev, "vchan %p: bad buffer alignment: %08x\n", - c, addr); + &c->vc, addr); return NULL; } } txd = kzalloc(sizeof(*txd) + j * sizeof(txd->sg[0]), GFP_ATOMIC); if (!txd) { - dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", c); + dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", &c->vc); return NULL; } @@ -655,17 +602,73 @@ static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg( } while (len); } - dma_async_tx_descriptor_init(&txd->tx, &c->chan); - txd->tx.flags = flags; - txd->tx.tx_submit = sa11x0_dma_tx_submit; txd->ddar = c->ddar; txd->size = size; txd->sglen = j; dev_dbg(chan->device->dev, "vchan %p: txd %p: size %u nr %u\n", - c, txd, txd->size, txd->sglen); + &c->vc, &txd->vd, txd->size, txd->sglen); - return &txd->tx; + return vchan_tx_prep(&c->vc, &txd->vd, flags); +} + +static struct dma_async_tx_descriptor *sa11x0_dma_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period, + enum dma_transfer_direction dir, void *context) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_desc *txd; + unsigned i, j, k, sglen, sgperiod; + + /* SA11x0 channels can only operate in their native direction */ + if (dir != (c->ddar & DDAR_RW ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV)) { + dev_err(chan->device->dev, "vchan %p: bad DMA direction: DDAR:%08x dir:%u\n", + &c->vc, c->ddar, dir); + return NULL; + } + + sgperiod = DIV_ROUND_UP(period, DMA_MAX_SIZE & ~DMA_ALIGN); + sglen = size * sgperiod / period; + + /* Do not allow zero-sized txds */ + if (sglen == 0) + return NULL; + + txd = kzalloc(sizeof(*txd) + sglen * sizeof(txd->sg[0]), GFP_ATOMIC); + if (!txd) { + dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", &c->vc); + return NULL; + } + + for (i = k = 0; i < size / period; i++) { + size_t tlen, len = period; + + for (j = 0; j < sgperiod; j++, k++) { + tlen = len; + + if (tlen > DMA_MAX_SIZE) { + unsigned mult = DIV_ROUND_UP(tlen, DMA_MAX_SIZE & ~DMA_ALIGN); + tlen = (tlen / mult) & ~DMA_ALIGN; + } + + txd->sg[k].addr = addr; + txd->sg[k].len = tlen; + addr += tlen; + len -= tlen; + } + + WARN_ON(len != 0); + } + + WARN_ON(k != sglen); + + txd->ddar = c->ddar; + txd->size = size; + txd->sglen = sglen; + txd->cyclic = 1; + txd->period = sgperiod; + + return vchan_tx_prep(&c->vc, &txd->vd, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); } static int sa11x0_dma_slave_config(struct sa11x0_dma_chan *c, struct dma_slave_config *cfg) @@ -695,8 +698,8 @@ static int sa11x0_dma_slave_config(struct sa11x0_dma_chan *c, struct dma_slave_c if (maxburst == 8) ddar |= DDAR_BS; - dev_dbg(c->chan.device->dev, "vchan %p: dma_slave_config addr %x width %u burst %u\n", - c, addr, width, maxburst); + dev_dbg(c->vc.chan.device->dev, "vchan %p: dma_slave_config addr %x width %u burst %u\n", + &c->vc, addr, width, maxburst); c->ddar = ddar | (addr & 0xf0000000) | (addr & 0x003ffffc) << 6; @@ -718,16 +721,13 @@ static int sa11x0_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, return sa11x0_dma_slave_config(c, (struct dma_slave_config *)arg); case DMA_TERMINATE_ALL: - dev_dbg(d->slave.dev, "vchan %p: terminate all\n", c); + dev_dbg(d->slave.dev, "vchan %p: terminate all\n", &c->vc); /* Clear the tx descriptor lists */ - spin_lock_irqsave(&c->lock, flags); - list_splice_tail_init(&c->desc_submitted, &head); - list_splice_tail_init(&c->desc_issued, &head); + spin_lock_irqsave(&c->vc.lock, flags); + vchan_get_all_descriptors(&c->vc, &head); p = c->phy; if (p) { - struct sa11x0_dma_desc *txd, *txn; - dev_dbg(d->slave.dev, "pchan %u: terminating\n", p->num); /* vchan is assigned to a pchan - stop the channel */ writel(DCSR_RUN | DCSR_IE | @@ -735,17 +735,13 @@ static int sa11x0_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, DCSR_STRTB | DCSR_DONEB, p->base + DMA_DCSR_C); - list_for_each_entry_safe(txd, txn, &d->desc_complete, node) - if (txd->tx.chan == &c->chan) - list_move(&txd->node, &head); - if (p->txd_load) { if (p->txd_load != p->txd_done) - list_add_tail(&p->txd_load->node, &head); + list_add_tail(&p->txd_load->vd.node, &head); p->txd_load = NULL; } if (p->txd_done) { - list_add_tail(&p->txd_done->node, &head); + list_add_tail(&p->txd_done->vd.node, &head); p->txd_done = NULL; } c->phy = NULL; @@ -754,14 +750,14 @@ static int sa11x0_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, spin_unlock(&d->lock); tasklet_schedule(&d->task); } - spin_unlock_irqrestore(&c->lock, flags); - sa11x0_dma_desc_free(d, &head); + spin_unlock_irqrestore(&c->vc.lock, flags); + vchan_dma_desc_free_list(&c->vc, &head); ret = 0; break; case DMA_PAUSE: - dev_dbg(d->slave.dev, "vchan %p: pause\n", c); - spin_lock_irqsave(&c->lock, flags); + dev_dbg(d->slave.dev, "vchan %p: pause\n", &c->vc); + spin_lock_irqsave(&c->vc.lock, flags); if (c->status == DMA_IN_PROGRESS) { c->status = DMA_PAUSED; @@ -774,26 +770,26 @@ static int sa11x0_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, spin_unlock(&d->lock); } } - spin_unlock_irqrestore(&c->lock, flags); + spin_unlock_irqrestore(&c->vc.lock, flags); ret = 0; break; case DMA_RESUME: - dev_dbg(d->slave.dev, "vchan %p: resume\n", c); - spin_lock_irqsave(&c->lock, flags); + dev_dbg(d->slave.dev, "vchan %p: resume\n", &c->vc); + spin_lock_irqsave(&c->vc.lock, flags); if (c->status == DMA_PAUSED) { c->status = DMA_IN_PROGRESS; p = c->phy; if (p) { writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_S); - } else if (!list_empty(&c->desc_issued)) { + } else if (!list_empty(&c->vc.desc_issued)) { spin_lock(&d->lock); list_add_tail(&c->node, &d->chan_pending); spin_unlock(&d->lock); } } - spin_unlock_irqrestore(&c->lock, flags); + spin_unlock_irqrestore(&c->vc.lock, flags); ret = 0; break; @@ -853,15 +849,13 @@ static int __devinit sa11x0_dma_init_dmadev(struct dma_device *dmadev, return -ENOMEM; } - c->chan.device = dmadev; c->status = DMA_IN_PROGRESS; c->ddar = chan_desc[i].ddar; c->name = chan_desc[i].name; - spin_lock_init(&c->lock); - INIT_LIST_HEAD(&c->desc_submitted); - INIT_LIST_HEAD(&c->desc_issued); INIT_LIST_HEAD(&c->node); - list_add_tail(&c->chan.device_node, &dmadev->channels); + + c->vc.desc_free = sa11x0_dma_free_desc; + vchan_init(&c->vc, dmadev); } return dma_async_device_register(dmadev); @@ -890,8 +884,9 @@ static void sa11x0_dma_free_channels(struct dma_device *dmadev) { struct sa11x0_dma_chan *c, *cn; - list_for_each_entry_safe(c, cn, &dmadev->channels, chan.device_node) { - list_del(&c->chan.device_node); + list_for_each_entry_safe(c, cn, &dmadev->channels, vc.chan.device_node) { + list_del(&c->vc.chan.device_node); + tasklet_kill(&c->vc.task); kfree(c); } } @@ -915,7 +910,6 @@ static int __devinit sa11x0_dma_probe(struct platform_device *pdev) spin_lock_init(&d->lock); INIT_LIST_HEAD(&d->chan_pending); - INIT_LIST_HEAD(&d->desc_complete); d->base = ioremap(res->start, resource_size(res)); if (!d->base) { @@ -947,7 +941,9 @@ static int __devinit sa11x0_dma_probe(struct platform_device *pdev) } dma_cap_set(DMA_SLAVE, d->slave.cap_mask); + dma_cap_set(DMA_CYCLIC, d->slave.cap_mask); d->slave.device_prep_slave_sg = sa11x0_dma_prep_slave_sg; + d->slave.device_prep_dma_cyclic = sa11x0_dma_prep_dma_cyclic; ret = sa11x0_dma_init_dmadev(&d->slave, &pdev->dev); if (ret) { dev_warn(d->slave.dev, "failed to register slave async device: %d\n", diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c index 27f5c781fd73fa2b1de7d96fa189eada935c0467..f4cd946d259db9939ce78c6443c9075fe8a3cb0f 100644 --- a/drivers/dma/sh/shdma-base.c +++ b/drivers/dma/sh/shdma-base.c @@ -483,6 +483,7 @@ static struct shdma_desc *shdma_add_desc(struct shdma_chan *schan, new->mark = DESC_PREPARED; new->async_tx.flags = flags; new->direction = direction; + new->partial = 0; *len -= copy_size; if (direction == DMA_MEM_TO_MEM || direction == DMA_MEM_TO_DEV) @@ -644,6 +645,14 @@ static int shdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, case DMA_TERMINATE_ALL: spin_lock_irqsave(&schan->chan_lock, flags); ops->halt_channel(schan); + + if (ops->get_partial && !list_empty(&schan->ld_queue)) { + /* Record partial transfer */ + struct shdma_desc *desc = list_first_entry(&schan->ld_queue, + struct shdma_desc, node); + desc->partial = ops->get_partial(schan, desc); + } + spin_unlock_irqrestore(&schan->chan_lock, flags); shdma_chan_ld_cleanup(schan, true); diff --git a/drivers/dma/sh/shdma.c b/drivers/dma/sh/shdma.c index 027c9be976544edc7029431e04e5f9b8697503ed..f41bcc5267fdafa94cdafbe20a1560088cde67ea 100644 --- a/drivers/dma/sh/shdma.c +++ b/drivers/dma/sh/shdma.c @@ -381,6 +381,17 @@ static bool sh_dmae_chan_irq(struct shdma_chan *schan, int irq) return true; } +static size_t sh_dmae_get_partial(struct shdma_chan *schan, + struct shdma_desc *sdesc) +{ + struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan, + shdma_chan); + struct sh_dmae_desc *sh_desc = container_of(sdesc, + struct sh_dmae_desc, shdma_desc); + return (sh_desc->hw.tcr - sh_dmae_readl(sh_chan, TCR)) << + sh_chan->xmit_shift; +} + /* Called from error IRQ or NMI */ static bool sh_dmae_reset(struct sh_dmae_device *shdev) { @@ -632,6 +643,7 @@ static const struct shdma_ops sh_dmae_shdma_ops = { .start_xfer = sh_dmae_start_xfer, .embedded_desc = sh_dmae_embedded_desc, .chan_irq = sh_dmae_chan_irq, + .get_partial = sh_dmae_get_partial, }; static int __devinit sh_dmae_probe(struct platform_device *pdev) diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index d52dbc6c54abdb346278b65bfbd8715f317d3e58..24acd711e0326852e2bf97bce308fb1fe272cea6 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -1119,15 +1119,21 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic( static int tegra_dma_alloc_chan_resources(struct dma_chan *dc) { struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc); + struct tegra_dma *tdma = tdc->tdma; + int ret; dma_cookie_init(&tdc->dma_chan); tdc->config_init = false; - return 0; + ret = clk_prepare_enable(tdma->dma_clk); + if (ret < 0) + dev_err(tdc2dev(tdc), "clk_prepare_enable failed: %d\n", ret); + return ret; } static void tegra_dma_free_chan_resources(struct dma_chan *dc) { struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc); + struct tegra_dma *tdma = tdc->tdma; struct tegra_dma_desc *dma_desc; struct tegra_dma_sg_req *sg_req; @@ -1163,6 +1169,7 @@ static void tegra_dma_free_chan_resources(struct dma_chan *dc) list_del(&sg_req->node); kfree(sg_req); } + clk_disable_unprepare(tdma->dma_clk); } /* Tegra20 specific DMA controller information */ @@ -1255,6 +1262,13 @@ static int __devinit tegra_dma_probe(struct platform_device *pdev) } } + /* Enable clock before accessing registers */ + ret = clk_prepare_enable(tdma->dma_clk); + if (ret < 0) { + dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n", ret); + goto err_pm_disable; + } + /* Reset DMA controller */ tegra_periph_reset_assert(tdma->dma_clk); udelay(2); @@ -1265,6 +1279,8 @@ static int __devinit tegra_dma_probe(struct platform_device *pdev) tdma_write(tdma, TEGRA_APBDMA_CONTROL, 0); tdma_write(tdma, TEGRA_APBDMA_IRQ_MASK_SET, 0xFFFFFFFFul); + clk_disable_unprepare(tdma->dma_clk); + INIT_LIST_HEAD(&tdma->dma_dev.channels); for (i = 0; i < cdata->nr_channels; i++) { struct tegra_dma_channel *tdc = &tdma->channels[i]; diff --git a/drivers/dma/virt-dma.c b/drivers/dma/virt-dma.c new file mode 100644 index 0000000000000000000000000000000000000000..6f80432a3f0a3d74bf9a4612712ad6edf4875edc --- /dev/null +++ b/drivers/dma/virt-dma.c @@ -0,0 +1,123 @@ +/* + * Virtual DMA channel support for DMAengine + * + * Copyright (C) 2012 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include + +#include "virt-dma.h" + +static struct virt_dma_desc *to_virt_desc(struct dma_async_tx_descriptor *tx) +{ + return container_of(tx, struct virt_dma_desc, tx); +} + +dma_cookie_t vchan_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct virt_dma_chan *vc = to_virt_chan(tx->chan); + struct virt_dma_desc *vd = to_virt_desc(tx); + unsigned long flags; + dma_cookie_t cookie; + + spin_lock_irqsave(&vc->lock, flags); + cookie = dma_cookie_assign(tx); + + list_add_tail(&vd->node, &vc->desc_submitted); + spin_unlock_irqrestore(&vc->lock, flags); + + dev_dbg(vc->chan.device->dev, "vchan %p: txd %p[%x]: submitted\n", + vc, vd, cookie); + + return cookie; +} +EXPORT_SYMBOL_GPL(vchan_tx_submit); + +struct virt_dma_desc *vchan_find_desc(struct virt_dma_chan *vc, + dma_cookie_t cookie) +{ + struct virt_dma_desc *vd; + + list_for_each_entry(vd, &vc->desc_issued, node) + if (vd->tx.cookie == cookie) + return vd; + + return NULL; +} +EXPORT_SYMBOL_GPL(vchan_find_desc); + +/* + * This tasklet handles the completion of a DMA descriptor by + * calling its callback and freeing it. + */ +static void vchan_complete(unsigned long arg) +{ + struct virt_dma_chan *vc = (struct virt_dma_chan *)arg; + struct virt_dma_desc *vd; + dma_async_tx_callback cb = NULL; + void *cb_data = NULL; + LIST_HEAD(head); + + spin_lock_irq(&vc->lock); + list_splice_tail_init(&vc->desc_completed, &head); + vd = vc->cyclic; + if (vd) { + vc->cyclic = NULL; + cb = vd->tx.callback; + cb_data = vd->tx.callback_param; + } + spin_unlock_irq(&vc->lock); + + if (cb) + cb(cb_data); + + while (!list_empty(&head)) { + vd = list_first_entry(&head, struct virt_dma_desc, node); + cb = vd->tx.callback; + cb_data = vd->tx.callback_param; + + list_del(&vd->node); + + vc->desc_free(vd); + + if (cb) + cb(cb_data); + } +} + +void vchan_dma_desc_free_list(struct virt_dma_chan *vc, struct list_head *head) +{ + while (!list_empty(head)) { + struct virt_dma_desc *vd = list_first_entry(head, + struct virt_dma_desc, node); + list_del(&vd->node); + dev_dbg(vc->chan.device->dev, "txd %p: freeing\n", vd); + vc->desc_free(vd); + } +} +EXPORT_SYMBOL_GPL(vchan_dma_desc_free_list); + +void vchan_init(struct virt_dma_chan *vc, struct dma_device *dmadev) +{ + dma_cookie_init(&vc->chan); + + spin_lock_init(&vc->lock); + INIT_LIST_HEAD(&vc->desc_submitted); + INIT_LIST_HEAD(&vc->desc_issued); + INIT_LIST_HEAD(&vc->desc_completed); + + tasklet_init(&vc->task, vchan_complete, (unsigned long)vc); + + vc->chan.device = dmadev; + list_add_tail(&vc->chan.device_node, &dmadev->channels); +} +EXPORT_SYMBOL_GPL(vchan_init); + +MODULE_AUTHOR("Russell King"); +MODULE_LICENSE("GPL"); diff --git a/drivers/dma/virt-dma.h b/drivers/dma/virt-dma.h new file mode 100644 index 0000000000000000000000000000000000000000..85c19d63f9fbe9b6392b73238a209d6f55411215 --- /dev/null +++ b/drivers/dma/virt-dma.h @@ -0,0 +1,152 @@ +/* + * Virtual DMA channel support for DMAengine + * + * Copyright (C) 2012 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef VIRT_DMA_H +#define VIRT_DMA_H + +#include +#include + +#include "dmaengine.h" + +struct virt_dma_desc { + struct dma_async_tx_descriptor tx; + /* protected by vc.lock */ + struct list_head node; +}; + +struct virt_dma_chan { + struct dma_chan chan; + struct tasklet_struct task; + void (*desc_free)(struct virt_dma_desc *); + + spinlock_t lock; + + /* protected by vc.lock */ + struct list_head desc_submitted; + struct list_head desc_issued; + struct list_head desc_completed; + + struct virt_dma_desc *cyclic; +}; + +static inline struct virt_dma_chan *to_virt_chan(struct dma_chan *chan) +{ + return container_of(chan, struct virt_dma_chan, chan); +} + +void vchan_dma_desc_free_list(struct virt_dma_chan *vc, struct list_head *head); +void vchan_init(struct virt_dma_chan *vc, struct dma_device *dmadev); +struct virt_dma_desc *vchan_find_desc(struct virt_dma_chan *, dma_cookie_t); + +/** + * vchan_tx_prep - prepare a descriptor + * vc: virtual channel allocating this descriptor + * vd: virtual descriptor to prepare + * tx_flags: flags argument passed in to prepare function + */ +static inline struct dma_async_tx_descriptor *vchan_tx_prep(struct virt_dma_chan *vc, + struct virt_dma_desc *vd, unsigned long tx_flags) +{ + extern dma_cookie_t vchan_tx_submit(struct dma_async_tx_descriptor *); + + dma_async_tx_descriptor_init(&vd->tx, &vc->chan); + vd->tx.flags = tx_flags; + vd->tx.tx_submit = vchan_tx_submit; + + return &vd->tx; +} + +/** + * vchan_issue_pending - move submitted descriptors to issued list + * vc: virtual channel to update + * + * vc.lock must be held by caller + */ +static inline bool vchan_issue_pending(struct virt_dma_chan *vc) +{ + list_splice_tail_init(&vc->desc_submitted, &vc->desc_issued); + return !list_empty(&vc->desc_issued); +} + +/** + * vchan_cookie_complete - report completion of a descriptor + * vd: virtual descriptor to update + * + * vc.lock must be held by caller + */ +static inline void vchan_cookie_complete(struct virt_dma_desc *vd) +{ + struct virt_dma_chan *vc = to_virt_chan(vd->tx.chan); + + dma_cookie_complete(&vd->tx); + dev_vdbg(vc->chan.device->dev, "txd %p[%x]: marked complete\n", + vd, vd->tx.cookie); + list_add_tail(&vd->node, &vc->desc_completed); + + tasklet_schedule(&vc->task); +} + +/** + * vchan_cyclic_callback - report the completion of a period + * vd: virtual descriptor + */ +static inline void vchan_cyclic_callback(struct virt_dma_desc *vd) +{ + struct virt_dma_chan *vc = to_virt_chan(vd->tx.chan); + + vc->cyclic = vd; + tasklet_schedule(&vc->task); +} + +/** + * vchan_next_desc - peek at the next descriptor to be processed + * vc: virtual channel to obtain descriptor from + * + * vc.lock must be held by caller + */ +static inline struct virt_dma_desc *vchan_next_desc(struct virt_dma_chan *vc) +{ + if (list_empty(&vc->desc_issued)) + return NULL; + + return list_first_entry(&vc->desc_issued, struct virt_dma_desc, node); +} + +/** + * vchan_get_all_descriptors - obtain all submitted and issued descriptors + * vc: virtual channel to get descriptors from + * head: list of descriptors found + * + * vc.lock must be held by caller + * + * Removes all submitted and issued descriptors from internal lists, and + * provides a list of all descriptors found + */ +static inline void vchan_get_all_descriptors(struct virt_dma_chan *vc, + struct list_head *head) +{ + list_splice_tail_init(&vc->desc_submitted, head); + list_splice_tail_init(&vc->desc_issued, head); + list_splice_tail_init(&vc->desc_completed, head); +} + +static inline void vchan_free_chan_resources(struct virt_dma_chan *vc) +{ + unsigned long flags; + LIST_HEAD(head); + + spin_lock_irqsave(&vc->lock, flags); + vchan_get_all_descriptors(vc, &head); + spin_unlock_irqrestore(&vc->lock, flags); + + vchan_dma_desc_free_list(vc, &head); +} + +#endif diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 616d90bcb3a4106929523c4a98fe32fb27f6a9a6..d5dc9da7f99f95fc9dd3a6edb5d4bc302e69c2c3 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -199,6 +199,36 @@ void *edac_align_ptr(void **p, unsigned size, int n_elems) return (void *)(((unsigned long)ptr) + align - r); } +static void _edac_mc_free(struct mem_ctl_info *mci) +{ + int i, chn, row; + struct csrow_info *csr; + const unsigned int tot_dimms = mci->tot_dimms; + const unsigned int tot_channels = mci->num_cschannel; + const unsigned int tot_csrows = mci->nr_csrows; + + if (mci->dimms) { + for (i = 0; i < tot_dimms; i++) + kfree(mci->dimms[i]); + kfree(mci->dimms); + } + if (mci->csrows) { + for (row = 0; row < tot_csrows; row++) { + csr = mci->csrows[row]; + if (csr) { + if (csr->channels) { + for (chn = 0; chn < tot_channels; chn++) + kfree(csr->channels[chn]); + kfree(csr->channels); + } + kfree(csr); + } + } + kfree(mci->csrows); + } + kfree(mci); +} + /** * edac_mc_alloc: Allocate and partially fill a struct mem_ctl_info structure * @mc_num: Memory controller number @@ -413,24 +443,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num, return mci; error: - if (mci->dimms) { - for (i = 0; i < tot_dimms; i++) - kfree(mci->dimms[i]); - kfree(mci->dimms); - } - if (mci->csrows) { - for (chn = 0; chn < tot_channels; chn++) { - csr = mci->csrows[chn]; - if (csr) { - for (chn = 0; chn < tot_channels; chn++) - kfree(csr->channels[chn]); - kfree(csr); - } - kfree(mci->csrows[i]); - } - kfree(mci->csrows); - } - kfree(mci); + _edac_mc_free(mci); return NULL; } @@ -445,6 +458,14 @@ void edac_mc_free(struct mem_ctl_info *mci) { edac_dbg(1, "\n"); + /* If we're not yet registered with sysfs free only what was allocated + * in edac_mc_alloc(). + */ + if (!device_is_registered(&mci->dev)) { + _edac_mc_free(mci); + return; + } + /* the mci instance is freed here, when the sysfs object is dropped */ edac_unregister_sysfs(mci); } diff --git a/drivers/edac/i3200_edac.c b/drivers/edac/i3200_edac.c index 47180a08edad28c7c95fea0cd51e9b7b15172f27..b6653a6fc5d56af68e55b0f2ea10855a1927ee2f 100644 --- a/drivers/edac/i3200_edac.c +++ b/drivers/edac/i3200_edac.c @@ -391,7 +391,7 @@ static int i3200_probe1(struct pci_dev *pdev, int dev_idx) for (j = 0; j < nr_channels; j++) { struct dimm_info *dimm = csrow->channels[j]->dimm; - dimm->nr_pages = nr_pages / nr_channels; + dimm->nr_pages = nr_pages; dimm->grain = nr_pages << PAGE_SHIFT; dimm->mtype = MEM_DDR2; dimm->dtype = DEV_UNKNOWN; diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index 39c63757c2a14fd7bc988c23d7ee6be2e84d0a06..6a49dd00b81b8fce1181a0e0d436bb8e4ce211d5 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1012,6 +1012,10 @@ static void handle_channel(struct i5000_pvt *pvt, int slot, int channel, /* add the number of COLUMN bits */ addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); + /* Dual-rank memories have twice the size */ + if (dinfo->dual_rank) + addrBits++; + addrBits += 6; /* add 64 bits per DIMM */ addrBits -= 20; /* divide by 2^^20 */ addrBits -= 3; /* 8 bits per bytes */ diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index f3b1f9fafa4b20b4f40917bcbab827ad760515df..5715b7c2c5177a6c76ed732fb6f20de9b7578220 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -513,7 +513,8 @@ static int get_dimm_config(struct mem_ctl_info *mci) { struct sbridge_pvt *pvt = mci->pvt_info; struct dimm_info *dimm; - int i, j, banks, ranks, rows, cols, size, npages; + unsigned i, j, banks, ranks, rows, cols, npages; + u64 size; u32 reg; enum edac_type mode; enum mem_type mtype; @@ -585,10 +586,10 @@ static int get_dimm_config(struct mem_ctl_info *mci) cols = numcol(mtr); /* DDR3 has 8 I/O banks */ - size = (rows * cols * banks * ranks) >> (20 - 3); + size = ((u64)rows * cols * banks * ranks) >> (20 - 3); npages = MiB_TO_PAGES(size); - edac_dbg(0, "mc#%d: channel %d, dimm %d, %d Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n", + edac_dbg(0, "mc#%d: channel %d, dimm %d, %Ld Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n", pvt->sbridge_dev->mc, i, j, size, npages, banks, ranks, rows, cols); diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index 920a609b2c35857c2fa64c8341ad6561fe6f7d65..38f9e52f358b17596b8b41177d6af493d509f84b 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -669,13 +669,18 @@ static int __devinit max77693_muic_probe(struct platform_device *pdev) } info->dev = &pdev->dev; info->max77693 = max77693; - info->max77693->regmap_muic = regmap_init_i2c(info->max77693->muic, - &max77693_muic_regmap_config); - if (IS_ERR(info->max77693->regmap_muic)) { - ret = PTR_ERR(info->max77693->regmap_muic); - dev_err(max77693->dev, - "failed to allocate register map: %d\n", ret); - goto err_regmap; + if (info->max77693->regmap_muic) + dev_dbg(&pdev->dev, "allocate register map\n"); + else { + info->max77693->regmap_muic = devm_regmap_init_i2c( + info->max77693->muic, + &max77693_muic_regmap_config); + if (IS_ERR(info->max77693->regmap_muic)) { + ret = PTR_ERR(info->max77693->regmap_muic); + dev_err(max77693->dev, + "failed to allocate register map: %d\n", ret); + goto err_regmap; + } } platform_set_drvdata(pdev, info); mutex_init(&info->mutex); diff --git a/drivers/extcon/extcon_gpio.c b/drivers/extcon/extcon_gpio.c index fe3db45fa83c13604db19590cb29546dc38efae1..3cc152e690b06087c8374bf35cb72106f9bfde32 100644 --- a/drivers/extcon/extcon_gpio.c +++ b/drivers/extcon/extcon_gpio.c @@ -107,7 +107,8 @@ static int __devinit gpio_extcon_probe(struct platform_device *pdev) if (ret < 0) return ret; - ret = gpio_request_one(extcon_data->gpio, GPIOF_DIR_IN, pdev->name); + ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN, + pdev->name); if (ret < 0) goto err; diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 153980be4ee64462f12a97563c0143fc59b3eb82..b298158cb9224dd24eb65c5c00d2733b5d6cfc98 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -6,6 +6,7 @@ #include #include #include +#include #include /* @@ -111,6 +112,8 @@ static int __init dmi_walk_early(void (*decode)(const struct dmi_header *, dmi_table(buf, dmi_len, dmi_num, decode, NULL); + add_device_randomness(buf, dmi_len); + dmi_iounmap(buf, dmi_len); return 0; } diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b16c8a72a2e241a8a47c524564a02c48a5389b35..ba7926f5c0996ea78f571ab5e87de2a3aa2c490e 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -294,7 +294,7 @@ config GPIO_MAX732X_IRQ config GPIO_MC9S08DZ60 bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" - depends on I2C && MACH_MX35_3DS + depends on I2C=y && MACH_MX35_3DS help Select this to enable the MC9S08DZ60 GPIO driver diff --git a/drivers/gpio/gpio-bt8xx.c b/drivers/gpio/gpio-bt8xx.c index e4cc7eb69bb2488e36c3db104feab9858fa6a764..92d555d5c25aad4c7a4df39a4ce772b8a448ed3c 100644 --- a/drivers/gpio/gpio-bt8xx.c +++ b/drivers/gpio/gpio-bt8xx.c @@ -50,7 +50,7 @@ #include /* Steal the hardware definitions from the bttv driver. */ -#include "../media/video/bt8xx/bt848.h" +#include "../media/pci/bt8xx/bt848.h" #define BT8XXGPIO_NR_GPIOS 24 /* We have 24 GPIO pins */ diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c index 150d9768811d4a09d30cef2ca9b69bdaf3c57275..ec48ed5126284d4f41303a5ac4e654f856ca4b7a 100644 --- a/drivers/gpio/gpio-em.c +++ b/drivers/gpio/gpio-em.c @@ -247,9 +247,9 @@ static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p) p->irq_base = irq_alloc_descs(pdata->irq_base, 0, pdata->number_of_pins, numa_node_id()); - if (IS_ERR_VALUE(p->irq_base)) { + if (p->irq_base < 0) { dev_err(&pdev->dev, "cannot get irq_desc\n"); - return -ENXIO; + return p->irq_base; } pr_debug("gio: hw base = %d, nr = %d, sw base = %d\n", pdata->gpio_base, pdata->number_of_pins, p->irq_base); @@ -266,7 +266,7 @@ static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p) return 0; } -static void __devexit em_gio_irq_domain_cleanup(struct em_gio_priv *p) +static void em_gio_irq_domain_cleanup(struct em_gio_priv *p) { struct gpio_em_config *pdata = p->pdev->dev.platform_data; diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c index a1c8754f52cf1b523c3da1bb9e572dc084ddde0b..202a99207b7d40c1a0e98dbe728cb7f782704a0d 100644 --- a/drivers/gpio/gpio-langwell.c +++ b/drivers/gpio/gpio-langwell.c @@ -339,7 +339,7 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev, resource_size_t start, len; struct lnw_gpio *lnw; u32 gpio_base; - int retval = 0; + int retval; int ngpio = id->driver_data; retval = pci_enable_device(pdev); @@ -357,6 +357,7 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev, base = ioremap_nocache(start, len); if (!base) { dev_err(&pdev->dev, "error mapping bar1\n"); + retval = -EFAULT; goto err3; } gpio_base = *((u32 *)base + 1); @@ -381,8 +382,10 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev, lnw->domain = irq_domain_add_linear(pdev->dev.of_node, ngpio, &lnw_gpio_irq_ops, lnw); - if (!lnw->domain) + if (!lnw->domain) { + retval = -ENOMEM; goto err3; + } lnw->reg_base = base; lnw->chip.label = dev_name(&pdev->dev); diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c index 8a420f13905e814bc9e76672941d64fd31ab57f2..ed94b4ea72e9324cdc70a1ad4551f0e85fca89d0 100644 --- a/drivers/gpio/gpio-lpc32xx.c +++ b/drivers/gpio/gpio-lpc32xx.c @@ -308,6 +308,7 @@ static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin, { struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + __set_gpio_level_p012(group, pin, value); __set_gpio_dir_p012(group, pin, 0); return 0; @@ -318,6 +319,7 @@ static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin, { struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + __set_gpio_level_p3(group, pin, value); __set_gpio_dir_p3(group, pin, 0); return 0; @@ -326,6 +328,9 @@ static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin, static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin, int value) { + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + __set_gpo_level_p3(group, pin, value); return 0; } diff --git a/drivers/gpio/gpio-msic.c b/drivers/gpio/gpio-msic.c index 71a838f44501065b76e6253a3780959f15c85e0b..b38986285868ab96151c2c522463ccfb377aeae1 100644 --- a/drivers/gpio/gpio-msic.c +++ b/drivers/gpio/gpio-msic.c @@ -99,7 +99,7 @@ static int msic_gpio_to_oreg(unsigned offset) if (offset < 20) return INTEL_MSIC_GPIO0HV0CTLO - offset + 16; - return INTEL_MSIC_GPIO1HV0CTLO + offset + 20; + return INTEL_MSIC_GPIO1HV0CTLO - offset + 20; } static int msic_gpio_direction_input(struct gpio_chip *chip, unsigned offset) diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index 4db460b6ecf7dbf1ffe7bfd14a1361d271609667..80f44bb64a871835b9cdf59561d8bff90d03126d 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -465,9 +465,8 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) goto out_iounmap; port->bgc.gc.to_irq = mxc_gpio_to_irq; - port->bgc.gc.base = pdev->id * 32; - port->bgc.dir = port->bgc.read_reg(port->bgc.reg_dir); - port->bgc.data = port->bgc.read_reg(port->bgc.reg_set); + port->bgc.gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 : + pdev->id * 32; err = gpiochip_add(&port->bgc.gc); if (err) diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 58a6a63a6ece65ed9de822449ee0d53cd41e66eb..9cac88a65f78402e2a45b919799576810d9ab9fd 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -62,6 +62,7 @@ int pxa_last_gpio; #ifdef CONFIG_OF static struct irq_domain *domain; +static struct device_node *pxa_gpio_of_node; #endif struct pxa_gpio_chip { @@ -277,6 +278,24 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) (value ? GPSR_OFFSET : GPCR_OFFSET)); } +#ifdef CONFIG_OF_GPIO +static int pxa_gpio_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) +{ + if (gpiospec->args[0] > pxa_last_gpio) + return -EINVAL; + + if (gc != &pxa_gpio_chips[gpiospec->args[0] / 32].chip) + return -EINVAL; + + if (flags) + *flags = gpiospec->args[1]; + + return gpiospec->args[0] % 32; +} +#endif + static int __devinit pxa_init_gpio_chip(int gpio_end, int (*set_wake)(unsigned int, unsigned int)) { @@ -304,6 +323,11 @@ static int __devinit pxa_init_gpio_chip(int gpio_end, c->get = pxa_gpio_get; c->set = pxa_gpio_set; c->to_irq = pxa_gpio_to_irq; +#ifdef CONFIG_OF_GPIO + c->of_node = pxa_gpio_of_node; + c->of_xlate = pxa_gpio_of_xlate; + c->of_gpio_n_cells = 2; +#endif /* number of GPIOs on last bank may be less than 32 */ c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32; @@ -488,6 +512,7 @@ static int pxa_gpio_nums(void) return count; } +#ifdef CONFIG_OF static struct of_device_id pxa_gpio_dt_ids[] = { { .compatible = "mrvl,pxa-gpio" }, { .compatible = "mrvl,mmp-gpio", .data = (void *)MMP_GPIO }, @@ -505,9 +530,9 @@ static int pxa_irq_domain_map(struct irq_domain *d, unsigned int irq, const struct irq_domain_ops pxa_irq_domain_ops = { .map = pxa_irq_domain_map, + .xlate = irq_domain_xlate_twocell, }; -#ifdef CONFIG_OF static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev) { int ret, nr_banks, nr_gpios, irq_base; @@ -545,6 +570,7 @@ static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev) } domain = irq_domain_add_legacy(np, nr_gpios, irq_base, 0, &pxa_irq_domain_ops, NULL); + pxa_gpio_of_node = np; return 0; err: iounmap(gpio_reg_base); @@ -653,7 +679,7 @@ static struct platform_driver pxa_gpio_driver = { .probe = pxa_gpio_probe, .driver = { .name = "pxa-gpio", - .of_match_table = pxa_gpio_dt_ids, + .of_match_table = of_match_ptr(pxa_gpio_dt_ids), }, }; diff --git a/drivers/gpio/gpio-rdc321x.c b/drivers/gpio/gpio-rdc321x.c index e97016af64434e292db5025240295fa3d1859dd6..b62d443e9a59125518289229b0a90c6d58503363 100644 --- a/drivers/gpio/gpio-rdc321x.c +++ b/drivers/gpio/gpio-rdc321x.c @@ -170,6 +170,7 @@ static int __devinit rdc321x_gpio_probe(struct platform_device *pdev) rdc321x_gpio_dev->reg2_data_base = r->start + 0x4; rdc321x_gpio_dev->chip.label = "rdc321x-gpio"; + rdc321x_gpio_dev->chip.owner = THIS_MODULE; rdc321x_gpio_dev->chip.direction_input = rdc_gpio_direction_input; rdc321x_gpio_dev->chip.direction_output = rdc_gpio_config; rdc321x_gpio_dev->chip.get = rdc_gpio_get_value; diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 92f7b2bb79d40ccf277d19a4d234a53fd8c98d83..ba126cc04073e04c0d304bd8b6cbbd455d3d1d67 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -2452,12 +2452,6 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = { .ngpio = EXYNOS5_GPIO_C3_NR, .label = "GPC3", }, - }, { - .chip = { - .base = EXYNOS5_GPC4(0), - .ngpio = EXYNOS5_GPIO_C4_NR, - .label = "GPC4", - }, }, { .chip = { .base = EXYNOS5_GPD0(0), @@ -2512,6 +2506,12 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = { .ngpio = EXYNOS5_GPIO_Y6_NR, .label = "GPY6", }, + }, { + .chip = { + .base = EXYNOS5_GPC4(0), + .ngpio = EXYNOS5_GPIO_C4_NR, + .label = "GPC4", + }, }, { .config = &samsung_gpio_cfgs[9], .irq_base = IRQ_EINT(0), @@ -2836,7 +2836,7 @@ static __init void exynos5_gpiolib_init(void) } /* need to set base address for gpc4 */ - exynos5_gpios_1[11].base = gpio_base1 + 0x2E0; + exynos5_gpios_1[20].base = gpio_base1 + 0x2E0; /* need to set base address for gpx */ chip = &exynos5_gpios_1[21]; diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c index 424dce8e3f30107ce2e9b5eb9b5d2bb394164cf9..8707d4572a06bfee4713fab5b521cd58f220aefa 100644 --- a/drivers/gpio/gpio-sch.c +++ b/drivers/gpio/gpio-sch.c @@ -241,7 +241,8 @@ static int __devinit sch_gpio_probe(struct platform_device *pdev) break; default: - return -ENODEV; + err = -ENODEV; + goto err_sch_gpio_core; } sch_gpio_core.dev = &pdev->dev; diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index a18c4aa68b1e8dcfadd5340e3f076bf33ecb788f..f1a45997aea8c3255aa7ecb697c72abe0beaf6d0 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -82,7 +82,7 @@ int of_get_named_gpio_flags(struct device_node *np, const char *propname, gpiochip_find(&gg_data, of_gpiochip_find_and_xlate); of_node_put(gg_data.gpiospec.np); - pr_debug("%s exited with status %d\n", __func__, ret); + pr_debug("%s exited with status %d\n", __func__, gg_data.out_gpio); return gg_data.out_gpio; } EXPORT_SYMBOL(of_get_named_gpio_flags); diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 23120c00a88175db9c74d4c33bff8a4d9e324fdc..90e28081712dbd7c68343f88bd10b468c10f604a 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -22,6 +22,7 @@ menuconfig DRM config DRM_USB tristate depends on DRM + depends on USB_ARCH_HAS_HCD select USB config DRM_KMS_HELPER diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c index d0c4574ef49c1d60b074643b278580a72ff8dc69..36164806b9d475aabff5165f47d481c8a93ce644 100644 --- a/drivers/gpu/drm/ast/ast_drv.c +++ b/drivers/gpu/drm/ast/ast_drv.c @@ -193,6 +193,9 @@ static const struct file_operations ast_fops = { .mmap = ast_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .read = drm_read, }; diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 7282c081fb53000397346d6c34879c06f940a4bd..a712cafcfa1dfde6f76e5c94a77307b7c1f1041a 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -841,7 +841,7 @@ int ast_cursor_init(struct drm_device *dev) ast->cursor_cache = obj; ast->cursor_cache_gpu_addr = gpu_addr; - DRM_ERROR("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr); + DRM_DEBUG_KMS("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr); return 0; fail: return ret; diff --git a/drivers/gpu/drm/cirrus/cirrus_drv.c b/drivers/gpu/drm/cirrus/cirrus_drv.c index 7053140c65969758f9f22ded7cea130fe0ab7bd5..b83a2d7ddd1ae8ec04ae0df1b1e647fbc1e327af 100644 --- a/drivers/gpu/drm/cirrus/cirrus_drv.c +++ b/drivers/gpu/drm/cirrus/cirrus_drv.c @@ -74,6 +74,9 @@ static const struct file_operations cirrus_driver_fops = { .unlocked_ioctl = drm_ioctl, .mmap = cirrus_mmap, .poll = drm_poll, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .fasync = drm_fasync, }; static struct drm_driver driver = { diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 08a7aa722d6b8f0d798b7a59ccd5b8146183f497..6fbfc244748fd9f5e23e05c90d57bcfbdead4b6b 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1981,7 +1981,7 @@ int drm_mode_cursor_ioctl(struct drm_device *dev, if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EINVAL; - if (!req->flags) + if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags)) return -EINVAL; mutex_lock(&dev->mode_config.mutex); diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index a8743c399e83234c976ebdb4b471542a0645c42d..b7ee230572b7c053a20c6bf115d4fd98a836f820 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -87,6 +87,9 @@ static struct edid_quirk { int product_id; u32 quirks; } edid_quirk_list[] = { + /* ASUS VW222S */ + { "ACI", 0x22a2, EDID_QUIRK_FORCE_REDUCED_BLANKING }, + /* Acer AL1706 */ { "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 }, /* Acer F51 */ diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c index 66d4a28ad5a23fc2cf4b7b745091296444e287b1..0303935d10e2ca45165509a7e9e8165962c99774 100644 --- a/drivers/gpu/drm/drm_edid_load.c +++ b/drivers/gpu/drm/drm_edid_load.c @@ -119,7 +119,7 @@ static int edid_load(struct drm_connector *connector, char *name, { const struct firmware *fw; struct platform_device *pdev; - u8 *fwdata = NULL, *edid; + u8 *fwdata = NULL, *edid, *new_edid; int fwsize, expected; int builtin = 0, err = 0; int i, valid_extensions = 0; @@ -195,12 +195,14 @@ static int edid_load(struct drm_connector *connector, char *name, "\"%s\" for connector \"%s\"\n", valid_extensions, edid[0x7e], name, connector_name); edid[0x7e] = valid_extensions; - edid = krealloc(edid, (valid_extensions + 1) * EDID_LENGTH, + new_edid = krealloc(edid, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL); - if (edid == NULL) { + if (new_edid == NULL) { err = -ENOMEM; + kfree(edid); goto relfw_out; } + edid = new_edid; } connector->display_info.raw_edid = edid; diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index b7adb4a967fd02b80eee0f0bd6e78b2d76c7e9b1..28637c181b15045fb0d2e9235a5d653ee0204f92 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -706,9 +706,6 @@ void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags) p->crtc_vblank_end = max(p->crtc_vsync_end, p->crtc_vtotal); p->crtc_hblank_start = min(p->crtc_hsync_start, p->crtc_hdisplay); p->crtc_hblank_end = max(p->crtc_hsync_end, p->crtc_htotal); - - p->crtc_hadjusted = false; - p->crtc_vadjusted = false; } EXPORT_SYMBOL(drm_mode_set_crtcinfo); diff --git a/drivers/gpu/drm/drm_proc.c b/drivers/gpu/drm/drm_proc.c index 371c695322d9f8f1736510eeaeeab7ea153cbe9e..da457b18eaaf601c7f4aa7ebec6b294355bbcc41 100644 --- a/drivers/gpu/drm/drm_proc.c +++ b/drivers/gpu/drm/drm_proc.c @@ -89,7 +89,7 @@ static const struct file_operations drm_proc_fops = { * Create a given set of proc files represented by an array of * gdm_proc_lists in the given root directory. */ -int drm_proc_create_files(struct drm_info_list *files, int count, +static int drm_proc_create_files(struct drm_info_list *files, int count, struct proc_dir_entry *root, struct drm_minor *minor) { struct drm_device *dev = minor->dev; @@ -172,7 +172,7 @@ int drm_proc_init(struct drm_minor *minor, int minor_id, return 0; } -int drm_proc_remove_files(struct drm_info_list *files, int count, +static int drm_proc_remove_files(struct drm_info_list *files, int count, struct drm_minor *minor) { struct list_head *pos, *q; diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index 7f5096763b7d387c25713d7e9ee95e17ce90f7d6..59a26e577b57f423077d5a2c86d75364f14b6838 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -36,6 +36,6 @@ config DRM_EXYNOS_VIDI config DRM_EXYNOS_G2D bool "Exynos DRM G2D" - depends on DRM_EXYNOS + depends on DRM_EXYNOS && !VIDEO_SAMSUNG_S5P_G2D help Choose this option if you want to use Exynos G2D for DRM. diff --git a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c index 613bf8a5d9b268331779b0f60f43f52a047269de..ae13febe0eaa64e821adf2f5db306e5ebdd07186 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c @@ -163,6 +163,12 @@ static void exynos_gem_dmabuf_kunmap(struct dma_buf *dma_buf, /* TODO */ } +static int exynos_gem_dmabuf_mmap(struct dma_buf *dma_buf, + struct vm_area_struct *vma) +{ + return -ENOTTY; +} + static struct dma_buf_ops exynos_dmabuf_ops = { .map_dma_buf = exynos_gem_map_dma_buf, .unmap_dma_buf = exynos_gem_unmap_dma_buf, @@ -170,6 +176,7 @@ static struct dma_buf_ops exynos_dmabuf_ops = { .kmap_atomic = exynos_gem_dmabuf_kmap_atomic, .kunmap = exynos_gem_dmabuf_kunmap, .kunmap_atomic = exynos_gem_dmabuf_kunmap_atomic, + .mmap = exynos_gem_dmabuf_mmap, .release = exynos_dmabuf_release, }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index ebacec6f1e48efef646700c630f02813007eaac0..d07071937453302fc74793c4aecb48a086b8069f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -160,7 +160,6 @@ static int exynos_drm_open(struct drm_device *dev, struct drm_file *file) if (!file_priv) return -ENOMEM; - drm_prime_init_file_private(&file->prime); file->driver_priv = file_priv; return exynos_drm_subdrv_open(dev, file); @@ -184,7 +183,6 @@ static void exynos_drm_preclose(struct drm_device *dev, e->base.destroy(&e->base); } } - drm_prime_destroy_file_private(&file->prime); spin_unlock_irqrestore(&dev->event_lock, flags); exynos_drm_subdrv_close(dev, file); @@ -241,6 +239,9 @@ static const struct file_operations exynos_drm_driver_fops = { .poll = drm_poll, .read = drm_read, .unlocked_ioctl = drm_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .release = drm_release, }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index a68d2b313f03cab1d42fae0d362159f6a4f1ba26..b19cd93e70472b325224611d5725614c33f72f83 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -831,11 +831,6 @@ static int __devinit fimd_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "failed to find registers\n"); - ret = -ENOENT; - goto err_clk; - } ctx->regs = devm_request_and_ioremap(&pdev->dev, res); if (!ctx->regs) { diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index d2d88f22a037a8ace36fae877fd45dbf60357b6c..1065e90d09199414585adca93e2e586b9fe215f0 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -129,7 +129,6 @@ struct g2d_runqueue_node { struct g2d_data { struct device *dev; struct clk *gate_clk; - struct resource *regs_res; void __iomem *regs; int irq; struct workqueue_struct *g2d_workq; @@ -751,7 +750,7 @@ static int __devinit g2d_probe(struct platform_device *pdev) struct exynos_drm_subdrv *subdrv; int ret; - g2d = kzalloc(sizeof(*g2d), GFP_KERNEL); + g2d = devm_kzalloc(&pdev->dev, sizeof(*g2d), GFP_KERNEL); if (!g2d) { dev_err(dev, "failed to allocate driver data\n"); return -ENOMEM; @@ -759,10 +758,8 @@ static int __devinit g2d_probe(struct platform_device *pdev) g2d->runqueue_slab = kmem_cache_create("g2d_runqueue_slab", sizeof(struct g2d_runqueue_node), 0, 0, NULL); - if (!g2d->runqueue_slab) { - ret = -ENOMEM; - goto err_free_mem; - } + if (!g2d->runqueue_slab) + return -ENOMEM; g2d->dev = dev; @@ -794,38 +791,26 @@ static int __devinit g2d_probe(struct platform_device *pdev) pm_runtime_enable(dev); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "failed to get I/O memory\n"); - ret = -ENOENT; - goto err_put_clk; - } - g2d->regs_res = request_mem_region(res->start, resource_size(res), - dev_name(dev)); - if (!g2d->regs_res) { - dev_err(dev, "failed to request I/O memory\n"); - ret = -ENOENT; - goto err_put_clk; - } - - g2d->regs = ioremap(res->start, resource_size(res)); + g2d->regs = devm_request_and_ioremap(&pdev->dev, res); if (!g2d->regs) { dev_err(dev, "failed to remap I/O memory\n"); ret = -ENXIO; - goto err_release_res; + goto err_put_clk; } g2d->irq = platform_get_irq(pdev, 0); if (g2d->irq < 0) { dev_err(dev, "failed to get irq\n"); ret = g2d->irq; - goto err_unmap_base; + goto err_put_clk; } - ret = request_irq(g2d->irq, g2d_irq_handler, 0, "drm_g2d", g2d); + ret = devm_request_irq(&pdev->dev, g2d->irq, g2d_irq_handler, 0, + "drm_g2d", g2d); if (ret < 0) { dev_err(dev, "irq request failed\n"); - goto err_unmap_base; + goto err_put_clk; } platform_set_drvdata(pdev, g2d); @@ -838,7 +823,7 @@ static int __devinit g2d_probe(struct platform_device *pdev) ret = exynos_drm_subdrv_register(subdrv); if (ret < 0) { dev_err(dev, "failed to register drm g2d device\n"); - goto err_free_irq; + goto err_put_clk; } dev_info(dev, "The exynos g2d(ver %d.%d) successfully probed\n", @@ -846,13 +831,6 @@ static int __devinit g2d_probe(struct platform_device *pdev) return 0; -err_free_irq: - free_irq(g2d->irq, g2d); -err_unmap_base: - iounmap(g2d->regs); -err_release_res: - release_resource(g2d->regs_res); - kfree(g2d->regs_res); err_put_clk: pm_runtime_disable(dev); clk_put(g2d->gate_clk); @@ -862,8 +840,6 @@ static int __devinit g2d_probe(struct platform_device *pdev) destroy_workqueue(g2d->g2d_workq); err_destroy_slab: kmem_cache_destroy(g2d->runqueue_slab); -err_free_mem: - kfree(g2d); return ret; } @@ -873,24 +849,18 @@ static int __devexit g2d_remove(struct platform_device *pdev) cancel_work_sync(&g2d->runqueue_work); exynos_drm_subdrv_unregister(&g2d->subdrv); - free_irq(g2d->irq, g2d); while (g2d->runqueue_node) { g2d_free_runqueue_node(g2d, g2d->runqueue_node); g2d->runqueue_node = g2d_get_runqueue_node(g2d); } - iounmap(g2d->regs); - release_resource(g2d->regs_res); - kfree(g2d->regs_res); - pm_runtime_disable(&pdev->dev); clk_put(g2d->gate_clk); g2d_fini_cmdlist(g2d); destroy_workqueue(g2d->g2d_workq); kmem_cache_destroy(g2d->runqueue_slab); - kfree(g2d); return 0; } @@ -924,7 +894,7 @@ static int g2d_resume(struct device *dev) } #endif -SIMPLE_DEV_PM_OPS(g2d_pm_ops, g2d_suspend, g2d_resume); +static SIMPLE_DEV_PM_OPS(g2d_pm_ops, g2d_suspend, g2d_resume); struct platform_driver g2d_driver = { .probe = g2d_probe, diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index f9efde40c097b819af24d41ff32162f3191ea632..a38051c95ec4384176ddc5f8bd8937e4270c3fb6 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -122,7 +122,7 @@ struct page **exynos_gem_get_pages(struct drm_gem_object *obj, __free_page(pages[i]); drm_free_large(pages); - return ERR_PTR(PTR_ERR(p)); + return ERR_CAST(p); } static void exynos_gem_put_pages(struct drm_gem_object *obj, @@ -662,7 +662,7 @@ int exynos_drm_gem_dumb_create(struct drm_file *file_priv, */ args->pitch = args->width * ((args->bpp + 7) / 8); - args->size = PAGE_ALIGN(args->pitch * args->height); + args->size = args->pitch * args->height; exynos_gem_obj = exynos_drm_gem_create(dev, args->flags, args->size); if (IS_ERR(exynos_gem_obj)) diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c index 8ffcdf8b9e223ffdfe7552aa1d57b4334cba19cc..3fdf0b65f47e6659b820d1fa343005b682e354b1 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c @@ -345,7 +345,7 @@ static int __devinit exynos_drm_hdmi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) { DRM_LOG_KMS("failed to alloc common hdmi context.\n"); return -ENOMEM; @@ -371,7 +371,6 @@ static int __devexit exynos_drm_hdmi_remove(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); exynos_drm_subdrv_unregister(&ctx->subdrv); - kfree(ctx); return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index b89829e5043a59a67152c5cafc241265f0183f12..e1f94b746bd7e0a9419e40ce694bf55e1bff36ab 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -29,7 +29,6 @@ static const uint32_t formats[] = { DRM_FORMAT_XRGB8888, DRM_FORMAT_ARGB8888, DRM_FORMAT_NV12, - DRM_FORMAT_NV12M, DRM_FORMAT_NV12MT, }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index bb1550c4dd57db37554954537ef19c61d4e513ce..537027a74fd54f06b49c1387c1650bf90abc11f1 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -633,7 +633,7 @@ static int __devinit vidi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -673,8 +673,6 @@ static int __devexit vidi_remove(struct platform_device *pdev) ctx->raw_edid = NULL; } - kfree(ctx); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 409e2ec1207c3ddbe4ecae65f9fae1498fcd6410..a6aea6f3ea1ab842d8c6d26a5ecb7e606c335f0d 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2172,7 +2172,7 @@ static int __devinit hdmi_resources_init(struct hdmi_context *hdata) DRM_DEBUG_KMS("HDMI resource init\n"); - memset(res, 0, sizeof *res); + memset(res, 0, sizeof(*res)); /* get clocks, power */ res->hdmi = clk_get(dev, "hdmi"); @@ -2204,7 +2204,7 @@ static int __devinit hdmi_resources_init(struct hdmi_context *hdata) clk_set_parent(res->sclk_hdmi, res->sclk_pixel); res->regul_bulk = kzalloc(ARRAY_SIZE(supply) * - sizeof res->regul_bulk[0], GFP_KERNEL); + sizeof(res->regul_bulk[0]), GFP_KERNEL); if (!res->regul_bulk) { DRM_ERROR("failed to get memory for regulators\n"); goto fail; @@ -2243,7 +2243,7 @@ static int hdmi_resources_cleanup(struct hdmi_context *hdata) clk_put(res->sclk_hdmi); if (!IS_ERR_OR_NULL(res->hdmi)) clk_put(res->hdmi); - memset(res, 0, sizeof *res); + memset(res, 0, sizeof(*res)); return 0; } @@ -2312,11 +2312,6 @@ static int __devinit hdmi_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - DRM_ERROR("failed to find registers\n"); - ret = -ENOENT; - goto err_resource; - } hdata->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hdata->regs) { diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 30fcc12f81dd943802031936dcfc9ea81b8f1548..25b97d5e5fcb44679a331b8e8e5b1a9da7d7d3ca 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -236,11 +236,11 @@ static inline void vp_filter_set(struct mixer_resources *res, static void vp_default_filter(struct mixer_resources *res) { vp_filter_set(res, VP_POLY8_Y0_LL, - filter_y_horiz_tap8, sizeof filter_y_horiz_tap8); + filter_y_horiz_tap8, sizeof(filter_y_horiz_tap8)); vp_filter_set(res, VP_POLY4_Y0_LL, - filter_y_vert_tap4, sizeof filter_y_vert_tap4); + filter_y_vert_tap4, sizeof(filter_y_vert_tap4)); vp_filter_set(res, VP_POLY4_C0_LL, - filter_cr_horiz_tap4, sizeof filter_cr_horiz_tap4); + filter_cr_horiz_tap4, sizeof(filter_cr_horiz_tap4)); } static void mixer_vsync_set_update(struct mixer_context *ctx, bool enable) diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c index 0f9b7db80f6bdc91193ef7bd914a580e2b5eec26..cf49ba5a54bf3a351b4bda14c8fd3d4daf26df73 100644 --- a/drivers/gpu/drm/gma500/oaktrail_device.c +++ b/drivers/gpu/drm/gma500/oaktrail_device.c @@ -476,6 +476,7 @@ static const struct psb_offset oaktrail_regmap[2] = { .pos = DSPAPOS, .surf = DSPASURF, .addr = MRST_DSPABASE, + .base = MRST_DSPABASE, .status = PIPEASTAT, .linoff = DSPALINOFF, .tileoff = DSPATILEOFF, @@ -499,6 +500,7 @@ static const struct psb_offset oaktrail_regmap[2] = { .pos = DSPBPOS, .surf = DSPBSURF, .addr = DSPBBASE, + .base = DSPBBASE, .status = PIPEBSTAT, .linoff = DSPBLINOFF, .tileoff = DSPBTILEOFF, diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c index 30dc22a7156ce88446d1a11ff2d484c2581c82e6..8033526bb53b98fd84e197f8b57a5b340cc45bd6 100644 --- a/drivers/gpu/drm/gma500/psb_intel_display.c +++ b/drivers/gpu/drm/gma500/psb_intel_display.c @@ -1362,6 +1362,9 @@ void psb_intel_crtc_init(struct drm_device *dev, int pipe, (struct drm_connector **) (psb_intel_crtc + 1); psb_intel_crtc->mode_set.num_connectors = 0; psb_intel_cursor_init(dev, psb_intel_crtc); + + /* Set to true so that the pipe is forced off on initial config. */ + psb_intel_crtc->active = true; } int psb_intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c index 57d892eaaa6effc66defdbb890bb9f1b68208515..463ec6871fe998229659eaa82fb8237a57109543 100644 --- a/drivers/gpu/drm/i810/i810_dma.c +++ b/drivers/gpu/drm/i810/i810_dma.c @@ -115,6 +115,9 @@ static const struct file_operations i810_buffer_fops = { .unlocked_ioctl = drm_ioctl, .mmap = i810_mmap_buffers, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/i810/i810_drv.c b/drivers/gpu/drm/i810/i810_drv.c index f9924ad04d0993d5d6157918082b9d4d5d3ed604..48cfcca2b350122f0b3ed5fdb7e78dee78af8dd6 100644 --- a/drivers/gpu/drm/i810/i810_drv.c +++ b/drivers/gpu/drm/i810/i810_drv.c @@ -51,6 +51,9 @@ static const struct file_operations i810_driver_fops = { .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 9cf7dfe022b989a23e02cb8ad45cd2177f956605..914c0dfabe6048113abc150b38e06a107eb33c5b 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1587,6 +1587,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) spin_lock_init(&dev_priv->irq_lock); spin_lock_init(&dev_priv->error_lock); spin_lock_init(&dev_priv->rps_lock); + spin_lock_init(&dev_priv->dpio_lock); if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) dev_priv->num_pipe = 3; diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index ed22612bc8477a3aa6dc95cfc2e058f7071c4878..a24ffbe97c01cffd8a8fa5093a5ba15ff04db30b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -346,11 +346,40 @@ static const struct pci_device_id pciidlist[] = { /* aka */ INTEL_VGA_DEVICE(0x016a, &intel_ivybridge_d_info), /* GT2 server */ INTEL_VGA_DEVICE(0x0402, &intel_haswell_d_info), /* GT1 desktop */ INTEL_VGA_DEVICE(0x0412, &intel_haswell_d_info), /* GT2 desktop */ + INTEL_VGA_DEVICE(0x0422, &intel_haswell_d_info), /* GT2 desktop */ INTEL_VGA_DEVICE(0x040a, &intel_haswell_d_info), /* GT1 server */ INTEL_VGA_DEVICE(0x041a, &intel_haswell_d_info), /* GT2 server */ + INTEL_VGA_DEVICE(0x042a, &intel_haswell_d_info), /* GT2 server */ INTEL_VGA_DEVICE(0x0406, &intel_haswell_m_info), /* GT1 mobile */ INTEL_VGA_DEVICE(0x0416, &intel_haswell_m_info), /* GT2 mobile */ - INTEL_VGA_DEVICE(0x0c16, &intel_haswell_d_info), /* SDV */ + INTEL_VGA_DEVICE(0x0426, &intel_haswell_m_info), /* GT2 mobile */ + INTEL_VGA_DEVICE(0x0C02, &intel_haswell_d_info), /* SDV GT1 desktop */ + INTEL_VGA_DEVICE(0x0C12, &intel_haswell_d_info), /* SDV GT2 desktop */ + INTEL_VGA_DEVICE(0x0C22, &intel_haswell_d_info), /* SDV GT2 desktop */ + INTEL_VGA_DEVICE(0x0C0A, &intel_haswell_d_info), /* SDV GT1 server */ + INTEL_VGA_DEVICE(0x0C1A, &intel_haswell_d_info), /* SDV GT2 server */ + INTEL_VGA_DEVICE(0x0C2A, &intel_haswell_d_info), /* SDV GT2 server */ + INTEL_VGA_DEVICE(0x0C06, &intel_haswell_m_info), /* SDV GT1 mobile */ + INTEL_VGA_DEVICE(0x0C16, &intel_haswell_m_info), /* SDV GT2 mobile */ + INTEL_VGA_DEVICE(0x0C26, &intel_haswell_m_info), /* SDV GT2 mobile */ + INTEL_VGA_DEVICE(0x0A02, &intel_haswell_d_info), /* ULT GT1 desktop */ + INTEL_VGA_DEVICE(0x0A12, &intel_haswell_d_info), /* ULT GT2 desktop */ + INTEL_VGA_DEVICE(0x0A22, &intel_haswell_d_info), /* ULT GT2 desktop */ + INTEL_VGA_DEVICE(0x0A0A, &intel_haswell_d_info), /* ULT GT1 server */ + INTEL_VGA_DEVICE(0x0A1A, &intel_haswell_d_info), /* ULT GT2 server */ + INTEL_VGA_DEVICE(0x0A2A, &intel_haswell_d_info), /* ULT GT2 server */ + INTEL_VGA_DEVICE(0x0A06, &intel_haswell_m_info), /* ULT GT1 mobile */ + INTEL_VGA_DEVICE(0x0A16, &intel_haswell_m_info), /* ULT GT2 mobile */ + INTEL_VGA_DEVICE(0x0A26, &intel_haswell_m_info), /* ULT GT2 mobile */ + INTEL_VGA_DEVICE(0x0D12, &intel_haswell_d_info), /* CRW GT1 desktop */ + INTEL_VGA_DEVICE(0x0D22, &intel_haswell_d_info), /* CRW GT2 desktop */ + INTEL_VGA_DEVICE(0x0D32, &intel_haswell_d_info), /* CRW GT2 desktop */ + INTEL_VGA_DEVICE(0x0D1A, &intel_haswell_d_info), /* CRW GT1 server */ + INTEL_VGA_DEVICE(0x0D2A, &intel_haswell_d_info), /* CRW GT2 server */ + INTEL_VGA_DEVICE(0x0D3A, &intel_haswell_d_info), /* CRW GT2 server */ + INTEL_VGA_DEVICE(0x0D16, &intel_haswell_m_info), /* CRW GT1 mobile */ + INTEL_VGA_DEVICE(0x0D26, &intel_haswell_m_info), /* CRW GT2 mobile */ + INTEL_VGA_DEVICE(0x0D36, &intel_haswell_m_info), /* CRW GT2 mobile */ INTEL_VGA_DEVICE(0x0f30, &intel_valleyview_m_info), INTEL_VGA_DEVICE(0x0157, &intel_valleyview_m_info), INTEL_VGA_DEVICE(0x0155, &intel_valleyview_d_info), diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 5c4657a54f977689c1668a9a70b8a8f6e39743c9..274d25de521e78c577d5a62456fc812024bbae79 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2365,6 +2365,10 @@ int i915_gpu_idle(struct drm_device *dev) /* Flush everything onto the inactive list. */ for_each_ring(ring, dev_priv, i) { + ret = i915_switch_context(ring, NULL, DEFAULT_CONTEXT_ID); + if (ret) + return ret; + ret = i915_ring_idle(ring); if (ret) return ret; @@ -2372,10 +2376,6 @@ int i915_gpu_idle(struct drm_device *dev) /* Is the device fubar? */ if (WARN_ON(!list_empty(&ring->gpu_write_list))) return -EBUSY; - - ret = i915_switch_context(ring, NULL, DEFAULT_CONTEXT_ID); - if (ret) - return ret; } return 0; @@ -3242,7 +3242,8 @@ i915_gem_object_pin(struct drm_i915_gem_object *obj, { int ret; - BUG_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT); + if (WARN_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT)) + return -EBUSY; if (obj->gtt_space != NULL) { if ((alignment && obj->gtt_offset & (alignment - 1)) || diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c index da8b01fb1bf8dbbc1cbe34457bb67f4ff3fe28eb..a9d58d72bb4da2215592bb8ba6554e9835fb48cf 100644 --- a/drivers/gpu/drm/i915/i915_gem_context.c +++ b/drivers/gpu/drm/i915/i915_gem_context.c @@ -451,7 +451,6 @@ int i915_switch_context(struct intel_ring_buffer *ring, struct drm_i915_file_private *file_priv = NULL; struct i915_hw_context *to; struct drm_i915_gem_object *from_obj = ring->last_context_obj; - int ret; if (dev_priv->hw_contexts_disabled) return 0; diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 5af631e788c8e6d39118eac4483ff9e2a40f329d..ff2819ea08130fb98da5f67550a18d9ca3c5974d 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -291,6 +291,16 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, target_i915_obj = to_intel_bo(target_obj); target_offset = target_i915_obj->gtt_offset; + /* Sandybridge PPGTT errata: We need a global gtt mapping for MI and + * pipe_control writes because the gpu doesn't properly redirect them + * through the ppgtt for non_secure batchbuffers. */ + if (unlikely(IS_GEN6(dev) && + reloc->write_domain == I915_GEM_DOMAIN_INSTRUCTION && + !target_i915_obj->has_global_gtt_mapping)) { + i915_gem_gtt_bind_object(target_i915_obj, + target_i915_obj->cache_level); + } + /* The target buffer should have appeared before us in the * exec_object list, so it should have a GTT space bound by now. */ @@ -399,16 +409,6 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, io_mapping_unmap_atomic(reloc_page); } - /* Sandybridge PPGTT errata: We need a global gtt mapping for MI and - * pipe_control writes because the gpu doesn't properly redirect them - * through the ppgtt for non_secure batchbuffers. */ - if (unlikely(IS_GEN6(dev) && - reloc->write_domain == I915_GEM_DOMAIN_INSTRUCTION && - !target_i915_obj->has_global_gtt_mapping)) { - i915_gem_gtt_bind_object(target_i915_obj, - target_i915_obj->cache_level); - } - /* and update the user's relocation entry */ reloc->presumed_offset = target_offset; diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 9fd25a435536121a33651c66ac00f5999c81f6f4..60815b861ec2143dc1fdad526232d03bea1158fd 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -72,7 +72,7 @@ int i915_gem_init_aliasing_ppgtt(struct drm_device *dev) /* ppgtt PDEs reside in the global gtt pagetable, which has 512*1024 * entries. For aliasing ppgtt support we just steal them at the end for * now. */ - first_pd_entry_in_global_pt = 512*1024 - I915_PPGTT_PD_ENTRIES; + first_pd_entry_in_global_pt = dev_priv->mm.gtt->gtt_total_entries - I915_PPGTT_PD_ENTRIES; ppgtt = kzalloc(sizeof(*ppgtt), GFP_KERNEL); if (!ppgtt) @@ -261,7 +261,10 @@ void i915_ppgtt_bind_object(struct i915_hw_ppgtt *ppgtt, pte_flags |= GEN6_PTE_CACHE_LLC; break; case I915_CACHE_NONE: - pte_flags |= GEN6_PTE_UNCACHED; + if (IS_HASWELL(dev)) + pte_flags |= HSW_PTE_UNCACHED; + else + pte_flags |= GEN6_PTE_UNCACHED; break; default: BUG(); @@ -361,7 +364,8 @@ int i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj) struct drm_device *dev = obj->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - if (dev_priv->mm.gtt->needs_dmar) + /* don't map imported dma buf objects */ + if (dev_priv->mm.gtt->needs_dmar && !obj->sg_table) return intel_gtt_map_memory(obj->pages, obj->base.size >> PAGE_SHIFT, &obj->sg_list, diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 8a3828528b9ddfa9678e7bfbf015bd7acdfdc29d..5249640cce1381c912c76ec73c6658cde12ae95f 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2700,9 +2700,6 @@ void intel_irq_init(struct drm_device *dev) dev->driver->irq_handler = i8xx_irq_handler; dev->driver->irq_uninstall = i8xx_irq_uninstall; } else if (INTEL_INFO(dev)->gen == 3) { - /* IIR "flip pending" means done if this bit is set */ - I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE)); - dev->driver->irq_preinstall = i915_irq_preinstall; dev->driver->irq_postinstall = i915_irq_postinstall; dev->driver->irq_uninstall = i915_irq_uninstall; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index acc99b21e0b66d4fd215c16fb6f1e81b49b5fe8b..28725ce5b82cc052a4469828166a7f9c8d987236 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -115,6 +115,7 @@ #define GEN6_PTE_VALID (1 << 0) #define GEN6_PTE_UNCACHED (1 << 1) +#define HSW_PTE_UNCACHED (0) #define GEN6_PTE_CACHE_LLC (2 << 1) #define GEN6_PTE_CACHE_LLC_MLC (3 << 1) #define GEN6_PTE_CACHE_BITS (3 << 1) diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c index 2f5388af8df9cdf775d66d4d4f72f50f29bdecc0..7631807a27886e2483d77de1046461350f9c7d15 100644 --- a/drivers/gpu/drm/i915/i915_sysfs.c +++ b/drivers/gpu/drm/i915/i915_sysfs.c @@ -32,6 +32,7 @@ #include "intel_drv.h" #include "i915_drv.h" +#ifdef CONFIG_PM static u32 calc_residency(struct drm_device *dev, const u32 reg) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -224,3 +225,14 @@ void i915_teardown_sysfs(struct drm_device *dev) device_remove_bin_file(&dev->primary->kdev, &dpf_attrs); sysfs_unmerge_group(&dev->primary->kdev.kobj, &rc6_attr_group); } +#else +void i915_setup_sysfs(struct drm_device *dev) +{ + return; +} + +void i915_teardown_sysfs(struct drm_device *dev) +{ + return; +} +#endif /* CONFIG_PM */ diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 7ed4a41c396590f77b477d36f4400fb687e86990..23bdc8cd145864f8346ce8d8ce4a255e436b0b6f 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -326,6 +326,36 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector) return ret; } +static struct edid *intel_crt_get_edid(struct drm_connector *connector, + struct i2c_adapter *i2c) +{ + struct edid *edid; + + edid = drm_get_edid(connector, i2c); + + if (!edid && !intel_gmbus_is_forced_bit(i2c)) { + DRM_DEBUG_KMS("CRT GMBUS EDID read failed, retry using GPIO bit-banging\n"); + intel_gmbus_force_bit(i2c, true); + edid = drm_get_edid(connector, i2c); + intel_gmbus_force_bit(i2c, false); + } + + return edid; +} + +/* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */ +static int intel_crt_ddc_get_modes(struct drm_connector *connector, + struct i2c_adapter *adapter) +{ + struct edid *edid; + + edid = intel_crt_get_edid(connector, adapter); + if (!edid) + return 0; + + return intel_connector_update_modes(connector, edid); +} + static bool intel_crt_detect_ddc(struct drm_connector *connector) { struct intel_crt *crt = intel_attached_crt(connector); @@ -336,7 +366,7 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector) BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG); i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin); - edid = drm_get_edid(connector, i2c); + edid = intel_crt_get_edid(connector, i2c); if (edid) { bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL; @@ -544,13 +574,13 @@ static int intel_crt_get_modes(struct drm_connector *connector) struct i2c_adapter *i2c; i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin); - ret = intel_ddc_get_modes(connector, i2c); + ret = intel_crt_ddc_get_modes(connector, i2c); if (ret || !IS_G4X(dev)) return ret; /* Try to probe digital port for output in DVI-I -> VGA mode. */ i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB); - return intel_ddc_get_modes(connector, i2c); + return intel_crt_ddc_get_modes(connector, i2c); } static int intel_crt_set_property(struct drm_connector *connector, diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f6159765f1ebe8cf8f6844c092deddd37bd44040..c040aee1341cf2065f1ea91eb1b54fbdf54d96b8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -869,6 +869,7 @@ intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc, unsigned long bestppm, ppm, absppm; int dotclk, flag; + flag = 0; dotclk = target * 1000; bestppm = 1000000; ppm = absppm = 0; @@ -1375,7 +1376,8 @@ static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv, "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); - WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT), + WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0 + && (val & DP_PIPEB_SELECT), "IBX PCH dp port still using transcoder B\n"); } @@ -1383,11 +1385,12 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); - WARN(hdmi_pipe_enabled(dev_priv, val, pipe), + WARN(hdmi_pipe_enabled(dev_priv, pipe, val), "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); - WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT), + WARN(HAS_PCH_IBX(dev_priv->dev) && (val & PORT_ENABLE) == 0 + && (val & SDVO_PIPE_B_SELECT), "IBX PCH hdmi port still using transcoder B\n"); } @@ -1403,13 +1406,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, reg = PCH_ADPA; val = I915_READ(reg); - WARN(adpa_pipe_enabled(dev_priv, val, pipe), + WARN(adpa_pipe_enabled(dev_priv, pipe, val), "PCH VGA enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); reg = PCH_LVDS; val = I915_READ(reg); - WARN(lvds_pipe_enabled(dev_priv, val, pipe), + WARN(lvds_pipe_enabled(dev_priv, pipe, val), "PCH LVDS enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); @@ -1871,7 +1874,7 @@ static void disable_pch_hdmi(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); - if (hdmi_pipe_enabled(dev_priv, val, pipe)) { + if (hdmi_pipe_enabled(dev_priv, pipe, val)) { DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n", reg, pipe); I915_WRITE(reg, val & ~PORT_ENABLE); @@ -1893,12 +1896,12 @@ static void intel_disable_pch_ports(struct drm_i915_private *dev_priv, reg = PCH_ADPA; val = I915_READ(reg); - if (adpa_pipe_enabled(dev_priv, val, pipe)) + if (adpa_pipe_enabled(dev_priv, pipe, val)) I915_WRITE(reg, val & ~ADPA_DAC_ENABLE); reg = PCH_LVDS; val = I915_READ(reg); - if (lvds_pipe_enabled(dev_priv, val, pipe)) { + if (lvds_pipe_enabled(dev_priv, pipe, val)) { DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val); I915_WRITE(reg, val & ~LVDS_PORT_EN); POSTING_READ(reg); @@ -3753,17 +3756,6 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, continue; } - if (intel_encoder->type == INTEL_OUTPUT_EDP) { - /* Use VBT settings if we have an eDP panel */ - unsigned int edp_bpc = dev_priv->edp.bpp / 3; - - if (edp_bpc < display_bpc) { - DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); - display_bpc = edp_bpc; - } - continue; - } - /* Not one of the known troublemakers, check the EDID */ list_for_each_entry(connector, &dev->mode_config.connector_list, head) { @@ -4199,12 +4191,6 @@ static void i8xx_update_pll(struct drm_crtc *crtc, POSTING_READ(DPLL(pipe)); udelay(150); - I915_WRITE(DPLL(pipe), dpll); - - /* Wait for the clocks to stabilize. */ - POSTING_READ(DPLL(pipe)); - udelay(150); - /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. @@ -4212,6 +4198,12 @@ static void i8xx_update_pll(struct drm_crtc *crtc, if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) intel_update_lvds(crtc, clock, adjusted_mode); + I915_WRITE(DPLL(pipe), dpll); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(DPLL(pipe)); + udelay(150); + /* The pixel multiplier can only be updated once the * DPLL is enabled and the clocks are stable. * diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 0a56b9ab0f5893d49b60499ae75db9f387b6fa2e..ace757af913366db3e7cff4e670fa9c804c84d08 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1174,10 +1174,14 @@ static void ironlake_edp_panel_off(struct intel_dp *intel_dp) WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n"); pp = ironlake_get_pp_control(dev_priv); - pp &= ~(POWER_TARGET_ON | PANEL_POWER_RESET | EDP_BLC_ENABLE); + /* We need to switch off panel power _and_ force vdd, for otherwise some + * panels get very unhappy and cease to work. */ + pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE); I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); + intel_dp->want_panel_vdd = false; + ironlake_wait_panel_off(intel_dp); } @@ -1287,11 +1291,9 @@ static void intel_dp_prepare(struct drm_encoder *encoder) * ensure that we have vdd while we switch off the panel. */ ironlake_edp_panel_vdd_on(intel_dp); ironlake_edp_backlight_off(intel_dp); - ironlake_edp_panel_off(intel_dp); - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + ironlake_edp_panel_off(intel_dp); intel_dp_link_down(intel_dp); - ironlake_edp_panel_vdd_off(intel_dp, false); } static void intel_dp_commit(struct drm_encoder *encoder) @@ -1326,11 +1328,9 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) /* Switching the panel off requires vdd. */ ironlake_edp_panel_vdd_on(intel_dp); ironlake_edp_backlight_off(intel_dp); - ironlake_edp_panel_off(intel_dp); - intel_dp_sink_dpms(intel_dp, mode); + ironlake_edp_panel_off(intel_dp); intel_dp_link_down(intel_dp); - ironlake_edp_panel_vdd_off(intel_dp, false); if (is_cpu_edp(intel_dp)) ironlake_edp_pll_off(encoder); @@ -2533,14 +2533,10 @@ intel_dp_init(struct drm_device *dev, int output_reg) break; } - intel_dp_i2c_init(intel_dp, intel_connector, name); - /* Cache some DPCD data in the eDP case */ if (is_edp(intel_dp)) { - bool ret; struct edp_power_seq cur, vbt; u32 pp_on, pp_off, pp_div; - struct edid *edid; pp_on = I915_READ(PCH_PP_ON_DELAYS); pp_off = I915_READ(PCH_PP_OFF_DELAYS); @@ -2591,6 +2587,13 @@ intel_dp_init(struct drm_device *dev, int output_reg) DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); + } + + intel_dp_i2c_init(intel_dp, intel_connector, name); + + if (is_edp(intel_dp)) { + bool ret; + struct edid *edid; ironlake_edp_panel_vdd_on(intel_dp); ret = intel_dp_get_dpcd(intel_dp); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 84353559441cc2169dde4bef5042949de62ef251..cd54cf88a28fe408519a6bd14e8f0b71659fd498 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -46,15 +46,16 @@ }) #define wait_for_atomic_us(COND, US) ({ \ - int i, ret__ = -ETIMEDOUT; \ - for (i = 0; i < (US); i++) { \ - if ((COND)) { \ - ret__ = 0; \ - break; \ - } \ - udelay(1); \ - } \ - ret__; \ + unsigned long timeout__ = jiffies + usecs_to_jiffies(US); \ + int ret__ = 0; \ + while (!(COND)) { \ + if (time_after(jiffies, timeout__)) { \ + ret__ = -ETIMEDOUT; \ + break; \ + } \ + cpu_relax(); \ + } \ + ret__; \ }) #define wait_for(COND, MS) _wait_for(COND, MS, 1) @@ -341,6 +342,8 @@ struct intel_fbc_work { int interval; }; +int intel_connector_update_modes(struct drm_connector *connector, + struct edid *edid); int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter); extern void intel_attach_force_audio_property(struct drm_connector *connector); @@ -380,7 +383,6 @@ extern void intel_pch_panel_fitting(struct drm_device *dev, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); extern u32 intel_panel_get_max_backlight(struct drm_device *dev); -extern u32 intel_panel_get_backlight(struct drm_device *dev); extern void intel_panel_set_backlight(struct drm_device *dev, u32 level); extern int intel_panel_setup_backlight(struct drm_device *dev); extern void intel_panel_enable_backlight(struct drm_device *dev, diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 98f602427eb8cb8fe9a8cc975ff1b4128ce68ae6..12dc3308ab8c982f063a4b5b0e7dcc8dd2b3519b 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -609,7 +609,7 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode) u32 temp; u32 enable_bits = SDVO_ENABLE; - if (intel_hdmi->has_audio) + if (intel_hdmi->has_audio || mode != DRM_MODE_DPMS_ON) enable_bits |= SDVO_AUDIO_ENABLE; temp = I915_READ(intel_hdmi->sdvox_reg); diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 1991a4408cf9e10896bd5295ba4b3b4b1d74856b..b9755f6378d8d5a6b4ad9a979ce54b49b84a9814 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -486,9 +486,6 @@ int intel_setup_gmbus(struct drm_device *dev) bus->dev_priv = dev_priv; bus->adapter.algo = &gmbus_algorithm; - ret = i2c_add_adapter(&bus->adapter); - if (ret) - goto err; /* By default use a conservative clock rate */ bus->reg0 = port | GMBUS_RATE_100KHZ; @@ -498,6 +495,10 @@ int intel_setup_gmbus(struct drm_device *dev) bus->force_bit = true; intel_gpio_setup(bus, port); + + ret = i2c_add_adapter(&bus->adapter); + if (ret) + goto err; } intel_i2c_reset(dev_priv->dev); @@ -540,9 +541,6 @@ void intel_teardown_gmbus(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; int i; - if (dev_priv->gmbus == NULL) - return; - for (i = 0; i < GMBUS_NUM_PORTS; i++) { struct intel_gmbus *bus = &dev_priv->gmbus[i]; i2c_del_adapter(&bus->adapter); diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index e05c0d3e3440f1398f85806f00203998bbfc24ce..e9a6f6aaed855dfa5acad6026c0f95e79a33955e 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -780,6 +780,14 @@ static const struct dmi_system_id intel_no_lvds[] = { DMI_MATCH(DMI_BOARD_NAME, "ZBOXSD-ID12/ID13"), }, }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Gigabyte GA-D525TUD", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "D525TUD"), + }, + }, { } /* terminating entry */ }; diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index 45848b9b670b0538625a18fca7427fd98a3155ae..29b72593fbb276fbce8b2ae00828cc7c48a06bf3 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -32,6 +32,25 @@ #include "intel_drv.h" #include "i915_drv.h" +/** + * intel_connector_update_modes - update connector from edid + * @connector: DRM connector device to use + * @edid: previously read EDID information + */ +int intel_connector_update_modes(struct drm_connector *connector, + struct edid *edid) +{ + int ret; + + drm_mode_connector_update_edid_property(connector, edid); + ret = drm_add_edid_modes(connector, edid); + drm_edid_to_eld(connector, edid); + connector->display_info.raw_edid = NULL; + kfree(edid); + + return ret; +} + /** * intel_ddc_get_modes - get modelist from monitor * @connector: DRM connector device to use @@ -43,18 +62,12 @@ int intel_ddc_get_modes(struct drm_connector *connector, struct i2c_adapter *adapter) { struct edid *edid; - int ret = 0; edid = drm_get_edid(connector, adapter); - if (edid) { - drm_mode_connector_update_edid_property(connector, edid); - ret = drm_add_edid_modes(connector, edid); - drm_edid_to_eld(connector, edid); - connector->display_info.raw_edid = NULL; - kfree(edid); - } + if (!edid) + return 0; - return ret; + return intel_connector_update_modes(connector, edid); } static const struct drm_prop_enum_list force_audio_names[] = { diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 10c7d39034e1c8c0a3e17491e17ffa3286b5f97a..e019b236986128bae46c61bf49180f7ec2502a0d 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -162,19 +162,12 @@ static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv) return val; } -u32 intel_panel_get_max_backlight(struct drm_device *dev) +static u32 _intel_panel_get_max_backlight(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 max; max = i915_read_blc_pwm_ctl(dev_priv); - if (max == 0) { - /* XXX add code here to query mode clock or hardware clock - * and program max PWM appropriately. - */ - pr_warn_once("fixme: max PWM is zero\n"); - return 1; - } if (HAS_PCH_SPLIT(dev)) { max >>= 16; @@ -188,6 +181,22 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev) max *= 0xff; } + return max; +} + +u32 intel_panel_get_max_backlight(struct drm_device *dev) +{ + u32 max; + + max = _intel_panel_get_max_backlight(dev); + if (max == 0) { + /* XXX add code here to query mode clock or hardware clock + * and program max PWM appropriately. + */ + pr_warn_once("fixme: max PWM is zero\n"); + return 1; + } + DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max); return max; } @@ -213,7 +222,7 @@ static u32 intel_panel_compute_brightness(struct drm_device *dev, u32 val) return val; } -u32 intel_panel_get_backlight(struct drm_device *dev) +static u32 intel_panel_get_backlight(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 val; @@ -311,9 +320,6 @@ void intel_panel_enable_backlight(struct drm_device *dev, if (dev_priv->backlight_level == 0) dev_priv->backlight_level = intel_panel_get_max_backlight(dev); - dev_priv->backlight_enabled = true; - intel_panel_actually_set_backlight(dev, dev_priv->backlight_level); - if (INTEL_INFO(dev)->gen >= 4) { uint32_t reg, tmp; @@ -326,7 +332,7 @@ void intel_panel_enable_backlight(struct drm_device *dev, * we don't track the backlight dpms state, hence check whether * we have to do anything first. */ if (tmp & BLM_PWM_ENABLE) - return; + goto set_level; if (dev_priv->num_pipe == 3) tmp &= ~BLM_PIPE_SELECT_IVB; @@ -347,6 +353,14 @@ void intel_panel_enable_backlight(struct drm_device *dev, I915_WRITE(BLC_PWM_PCH_CTL1, tmp); } } + +set_level: + /* Call below after setting BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1. + * BLC_PWM_CPU_CTL may be cleared to zero automatically when these + * registers are set. + */ + dev_priv->backlight_enabled = true; + intel_panel_actually_set_backlight(dev, dev_priv->backlight_level); } static void intel_panel_init_backlight(struct drm_device *dev) @@ -419,7 +433,11 @@ int intel_panel_setup_backlight(struct drm_device *dev) memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_RAW; - props.max_brightness = intel_panel_get_max_backlight(dev); + props.max_brightness = _intel_panel_get_max_backlight(dev); + if (props.max_brightness == 0) { + DRM_ERROR("Failed to get maximum backlight value\n"); + return -ENODEV; + } dev_priv->backlight = backlight_device_register("intel_backlight", &connector->kdev, dev, diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 94aabcaa3a673a46aa0e9361133aa3331ed8e453..ba8a27b1757ad97e774fe8266432161477a3561a 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2441,17 +2441,10 @@ static void gen6_enable_rps(struct drm_device *dev) dev_priv->max_delay << 24 | dev_priv->min_delay << 16); - if (IS_HASWELL(dev)) { - I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400); - I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000); - I915_WRITE(GEN6_RP_UP_EI, 66000); - I915_WRITE(GEN6_RP_DOWN_EI, 350000); - } else { - I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000); - I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000); - I915_WRITE(GEN6_RP_UP_EI, 100000); - I915_WRITE(GEN6_RP_DOWN_EI, 5000000); - } + I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400); + I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000); + I915_WRITE(GEN6_RP_UP_EI, 66000); + I915_WRITE(GEN6_RP_DOWN_EI, 350000); I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); I915_WRITE(GEN6_RP_CONTROL, @@ -3679,6 +3672,9 @@ static void gen3_init_clock_gating(struct drm_device *dev) if (IS_PINEVIEW(dev)) I915_WRITE(ECOSKPD, _MASKED_BIT_ENABLE(ECO_GATING_CX_ONLY)); + + /* IIR "flip pending" means done if this bit is set */ + I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE)); } static void i85x_init_clock_gating(struct drm_device *dev) @@ -3963,6 +3959,7 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) DRM_ERROR("Force wake wait timed out\n"); I915_WRITE_NOTRACE(FORCEWAKE, 1); + POSTING_READ(FORCEWAKE); if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1), 500)) DRM_ERROR("Force wake wait timed out\n"); @@ -3983,6 +3980,7 @@ static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) DRM_ERROR("Force wake wait timed out\n"); I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(1)); + POSTING_READ(FORCEWAKE_MT); if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1), 500)) DRM_ERROR("Force wake wait timed out\n"); @@ -4018,14 +4016,14 @@ void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv) static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE, 0); - /* The below doubles as a POSTING_READ */ + POSTING_READ(FORCEWAKE); gen6_gt_check_fifodbg(dev_priv); } static void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(1)); - /* The below doubles as a POSTING_READ */ + POSTING_READ(FORCEWAKE_MT); gen6_gt_check_fifodbg(dev_priv); } diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index bf0195a96d5308c48d273cb492081a8d415ba188..e2a73b38abe96e7dc49674d39806c5ca3cab6e51 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -227,31 +227,36 @@ gen6_render_ring_flush(struct intel_ring_buffer *ring, * number of bits based on the write domains has little performance * impact. */ - flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH; - flags |= PIPE_CONTROL_TLB_INVALIDATE; - flags |= PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE; - flags |= PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE; - flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH; - flags |= PIPE_CONTROL_VF_CACHE_INVALIDATE; - flags |= PIPE_CONTROL_CONST_CACHE_INVALIDATE; - flags |= PIPE_CONTROL_STATE_CACHE_INVALIDATE; - /* - * Ensure that any following seqno writes only happen when the render - * cache is indeed flushed (but only if the caller actually wants that). - */ - if (flush_domains) + if (flush_domains) { + flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH; + flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH; + /* + * Ensure that any following seqno writes only happen + * when the render cache is indeed flushed. + */ flags |= PIPE_CONTROL_CS_STALL; + } + if (invalidate_domains) { + flags |= PIPE_CONTROL_TLB_INVALIDATE; + flags |= PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE; + flags |= PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE; + flags |= PIPE_CONTROL_VF_CACHE_INVALIDATE; + flags |= PIPE_CONTROL_CONST_CACHE_INVALIDATE; + flags |= PIPE_CONTROL_STATE_CACHE_INVALIDATE; + /* + * TLB invalidate requires a post-sync write. + */ + flags |= PIPE_CONTROL_QW_WRITE; + } - ret = intel_ring_begin(ring, 6); + ret = intel_ring_begin(ring, 4); if (ret) return ret; - intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(5)); + intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4)); intel_ring_emit(ring, flags); intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT); - intel_ring_emit(ring, 0); /* lower dword */ - intel_ring_emit(ring, 0); /* uppwer dword */ - intel_ring_emit(ring, MI_NOOP); + intel_ring_emit(ring, 0); intel_ring_advance(ring); return 0; @@ -289,8 +294,6 @@ static int init_ring_common(struct intel_ring_buffer *ring) I915_WRITE_HEAD(ring, 0); ring->write_tail(ring, 0); - /* Initialize the ring. */ - I915_WRITE_START(ring, obj->gtt_offset); head = I915_READ_HEAD(ring) & HEAD_ADDR; /* G45 ring initialization fails to reset head to zero */ @@ -316,6 +319,11 @@ static int init_ring_common(struct intel_ring_buffer *ring) } } + /* Initialize the ring. This must happen _after_ we've cleared the ring + * registers with the above sequence (the readback of the HEAD registers + * also enforces ordering), otherwise the hw might lose the new ring + * register values. */ + I915_WRITE_START(ring, obj->gtt_offset); I915_WRITE_CTL(ring, ((ring->size - PAGE_SIZE) & RING_NR_PAGES) | RING_VALID); diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 26a6a4d0d0788b536de65f3b4ca6261768115179..123afd357611a6fbbd4c235aa7449afd6ac15dff 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -444,13 +444,16 @@ static bool intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd, struct i2c_msg *msgs; int i, ret = true; + /* Would be simpler to allocate both in one go ? */ buf = (u8 *)kzalloc(args_len * 2 + 2, GFP_KERNEL); if (!buf) return false; msgs = kcalloc(args_len + 3, sizeof(*msgs), GFP_KERNEL); - if (!msgs) + if (!msgs) { + kfree(buf); return false; + } intel_sdvo_debug_write(intel_sdvo, cmd, args, args_len); @@ -1689,6 +1692,7 @@ static bool intel_sdvo_detect_hdmi_audio(struct drm_connector *connector) edid = intel_sdvo_get_edid(connector); if (edid != NULL && edid->input & DRM_EDID_INPUT_DIGITAL) has_audio = drm_detect_monitor_audio(edid); + kfree(edid); return has_audio; } @@ -2569,7 +2573,6 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) hotplug_mask = intel_sdvo->is_sdvob ? SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915; } - dev_priv->hotplug_supported_mask |= hotplug_mask; drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs); @@ -2577,14 +2580,6 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps)) goto err; - /* Set up hotplug command - note paranoia about contents of reply. - * We assume that the hardware is in a sane state, and only touch - * the bits we think we understand. - */ - intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, - &intel_sdvo->hotplug_active, 2); - intel_sdvo->hotplug_active[0] &= ~0x3; - if (intel_sdvo_output_setup(intel_sdvo, intel_sdvo->caps.output_flags) != true) { DRM_DEBUG_KMS("SDVO output failed to setup on %s\n", @@ -2592,6 +2587,12 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) goto err; } + /* Only enable the hotplug irq if we need it, to work around noisy + * hotplug lines. + */ + if (intel_sdvo->hotplug_active[0]) + dev_priv->hotplug_supported_mask |= hotplug_mask; + intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg); /* Set the input timing to the screen. Assume always input 0. */ diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index cc8df4de2d921691fdee876b1cdc9b97acb39b8f..7644f31a3778685bb3e21c021e1ad76c5afb2e95 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -60,11 +60,11 @@ ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb, switch (fb->pixel_format) { case DRM_FORMAT_XBGR8888: - sprctl |= SPRITE_FORMAT_RGBX888; + sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX; pixel_size = 4; break; case DRM_FORMAT_XRGB8888: - sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX; + sprctl |= SPRITE_FORMAT_RGBX888; pixel_size = 4; break; case DRM_FORMAT_YUYV: diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c index ea1024d79974a0f05b91c0e763ca6929266f5a72..e5f145d2cb3bac2565051a65cfbb07a8cf206c36 100644 --- a/drivers/gpu/drm/mgag200/mgag200_drv.c +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c @@ -84,6 +84,9 @@ static const struct file_operations mgag200_driver_fops = { .mmap = mgag200_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .read = drm_read, }; diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index a4d7c500c97b7f43d049a8ed8cc6bca59b20c100..b69642d5d850581694fe8741056a5d0529f4eeed 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -468,10 +468,11 @@ static int mga_g200er_set_plls(struct mga_device *mdev, long clock) { unsigned int vcomax, vcomin, pllreffreq; unsigned int delta, tmpdelta; - unsigned int testr, testn, testm, testo; + int testr, testn, testm, testo; unsigned int p, m, n; - unsigned int computed; + unsigned int computed, vco; int tmp; + const unsigned int m_div_val[] = { 1, 2, 4, 8 }; m = n = p = 0; vcomax = 1488000; @@ -490,12 +491,13 @@ static int mga_g200er_set_plls(struct mga_device *mdev, long clock) if (delta == 0) break; for (testo = 5; testo < 33; testo++) { - computed = pllreffreq * (testn + 1) / + vco = pllreffreq * (testn + 1) / (testr + 1); - if (computed < vcomin) + if (vco < vcomin) continue; - if (computed > vcomax) + if (vco > vcomax) continue; + computed = vco / (m_div_val[testm] * (testo + 1)); if (computed > clock) tmpdelta = computed - clock; else diff --git a/drivers/gpu/drm/nouveau/nouveau_abi16.c b/drivers/gpu/drm/nouveau/nouveau_abi16.c index ff23d88880e50ab727b6836c4fc7ad6d8860a222..3ca240b4413d48eb9ddf0bdf479db97345397965 100644 --- a/drivers/gpu/drm/nouveau/nouveau_abi16.c +++ b/drivers/gpu/drm/nouveau/nouveau_abi16.c @@ -179,7 +179,7 @@ nouveau_abi16_ioctl_grobj_alloc(ABI16_IOCTL_ARGS) return 0; } else if (init->class == 0x906e) { - NV_ERROR(dev, "906e not supported yet\n"); + NV_DEBUG(dev, "906e not supported yet\n"); return -EINVAL; } diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index fc841e87b343a6aa71cc05bb7f4ae94e7399fafc..26ebffebe7107db7accfecc619b282ba0b271252 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -211,11 +211,6 @@ static int nouveau_dsm_power_state(enum vga_switcheroo_client_id id, return nouveau_dsm_set_discrete_state(nouveau_dsm_priv.dhandle, state); } -static int nouveau_dsm_init(void) -{ - return 0; -} - static int nouveau_dsm_get_client_id(struct pci_dev *pdev) { /* easy option one - intel vendor ID means Integrated */ @@ -232,7 +227,6 @@ static int nouveau_dsm_get_client_id(struct pci_dev *pdev) static struct vga_switcheroo_handler nouveau_dsm_handler = { .switchto = nouveau_dsm_switchto, .power_state = nouveau_dsm_power_state, - .init = nouveau_dsm_init, .get_client_id = nouveau_dsm_get_client_id, }; diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 69688ef5cf46802d82922046577ada8d27f3a82c..7e16dc5e64672929e80a2aecf4b6e6e2446641b8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -598,7 +598,7 @@ nouveau_display_dumb_create(struct drm_file *file_priv, struct drm_device *dev, args->size = args->pitch * args->height; args->size = roundup(args->size, PAGE_SIZE); - ret = nouveau_gem_new(dev, args->size, 0, TTM_PL_FLAG_VRAM, 0, 0, &bo); + ret = nouveau_gem_new(dev, args->size, 0, NOUVEAU_GEM_DOMAIN_VRAM, 0, 0, &bo); if (ret) return ret; diff --git a/drivers/gpu/drm/nouveau/nouveau_i2c.c b/drivers/gpu/drm/nouveau/nouveau_i2c.c index 77e564667b5c89d6fec1ad5e58f55ce5082f2c42..240cf962c999ee322e4f77fe2e612ffc731e6eb7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_i2c.c +++ b/drivers/gpu/drm/nouveau/nouveau_i2c.c @@ -229,7 +229,7 @@ nouveau_i2c_init(struct drm_device *dev) } break; case 6: /* NV50- DP AUX */ - port->drive = entry[0]; + port->drive = entry[0] & 0x0f; port->sense = port->drive; port->adapter.algo = &nouveau_dp_i2c_algo; break; diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 1cdfd6e757ce7455c03ea35eaef42dbe6253ab7b..c61014442aa931cfe5822069c7ecf6c0d565f4dc 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -731,15 +731,16 @@ nouveau_card_init(struct drm_device *dev) case 0xa3: case 0xa5: case 0xa8: - case 0xaf: nva3_copy_create(dev); break; } break; case NV_C0: - nvc0_copy_create(dev, 1); + if (!(nv_rd32(dev, 0x022500) & 0x00000200)) + nvc0_copy_create(dev, 1); case NV_D0: - nvc0_copy_create(dev, 0); + if (!(nv_rd32(dev, 0x022500) & 0x00000100)) + nvc0_copy_create(dev, 0); break; default: break; diff --git a/drivers/gpu/drm/nouveau/nv50_gpio.c b/drivers/gpu/drm/nouveau/nv50_gpio.c index f429e6a8ca7aeba09b3f8ef852376ea8d360c4ee..c399d510b27a8611aa4524b3cffa582f9f033da7 100644 --- a/drivers/gpu/drm/nouveau/nv50_gpio.c +++ b/drivers/gpu/drm/nouveau/nv50_gpio.c @@ -22,6 +22,7 @@ * Authors: Ben Skeggs */ +#include #include "drmP.h" #include "nouveau_drv.h" #include "nouveau_hw.h" @@ -110,11 +111,26 @@ nv50_gpio_isr(struct drm_device *dev) nv_wr32(dev, 0xe074, intr1); } +static struct dmi_system_id gpio_reset_ids[] = { + { + .ident = "Apple Macbook 10,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro10,1"), + } + }, + { } +}; + int nv50_gpio_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; + /* initialise gpios and routing to vbios defaults */ + if (dmi_check_system(gpio_reset_ids)) + nouveau_gpio_reset(dev); + /* disable, and ack any pending gpio interrupts */ nv_wr32(dev, 0xe050, 0x00000000); nv_wr32(dev, 0xe054, 0xffffffff); diff --git a/drivers/gpu/drm/nouveau/nv84_fifo.c b/drivers/gpu/drm/nouveau/nv84_fifo.c index cc82d799fc3ba162ae2798d3a5e0df1e6db4abec..c564c5e4c30aa97841f5cf1060d3bbcf8686ebbf 100644 --- a/drivers/gpu/drm/nouveau/nv84_fifo.c +++ b/drivers/gpu/drm/nouveau/nv84_fifo.c @@ -117,17 +117,22 @@ nv84_fifo_context_del(struct nouveau_channel *chan, int engine) struct drm_device *dev = chan->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; unsigned long flags; + u32 save; /* remove channel from playlist, will context switch if active */ spin_lock_irqsave(&dev_priv->context_switch_lock, flags); nv_mask(dev, 0x002600 + (chan->id * 4), 0x80000000, 0x00000000); nv50_fifo_playlist_update(dev); + save = nv_mask(dev, 0x002520, 0x0000003f, 0x15); + /* tell any engines on this channel to unload their contexts */ nv_wr32(dev, 0x0032fc, chan->ramin->vinst >> 12); if (!nv_wait_ne(dev, 0x0032fc, 0xffffffff, 0xffffffff)) NV_INFO(dev, "PFIFO: channel %d unload timeout\n", chan->id); + nv_wr32(dev, 0x002520, save); + nv_wr32(dev, 0x002600 + (chan->id * 4), 0x00000000); spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags); @@ -184,10 +189,13 @@ nv84_fifo_fini(struct drm_device *dev, int engine, bool suspend) struct drm_nouveau_private *dev_priv = dev->dev_private; struct nv84_fifo_priv *priv = nv_engine(dev, engine); int i; + u32 save; /* set playlist length to zero, fifo will unload context */ nv_wr32(dev, 0x0032ec, 0); + save = nv_mask(dev, 0x002520, 0x0000003f, 0x15); + /* tell all connected engines to unload their contexts */ for (i = 0; i < priv->base.channels; i++) { struct nouveau_channel *chan = dev_priv->channels.ptr[i]; @@ -199,6 +207,7 @@ nv84_fifo_fini(struct drm_device *dev, int engine, bool suspend) } } + nv_wr32(dev, 0x002520, save); nv_wr32(dev, 0x002140, 0); return 0; } diff --git a/drivers/gpu/drm/nouveau/nvc0_fb.c b/drivers/gpu/drm/nouveau/nvc0_fb.c index f704e942372e75b291cc505536a197c4c464a537..f376c39310dfb11e00a944577aba9209e4481451 100644 --- a/drivers/gpu/drm/nouveau/nvc0_fb.c +++ b/drivers/gpu/drm/nouveau/nvc0_fb.c @@ -124,6 +124,7 @@ nvc0_fb_init(struct drm_device *dev) priv = dev_priv->engine.fb.priv; nv_wr32(dev, 0x100c10, priv->r100c10 >> 8); + nv_mask(dev, 0x17e820, 0x00100000, 0x00000000); /* NV_PLTCG_INTR_EN */ return 0; } diff --git a/drivers/gpu/drm/nouveau/nvc0_fifo.c b/drivers/gpu/drm/nouveau/nvc0_fifo.c index 7d85553d518c42ee5826c0cf516086cf01ce1534..cd39eb99f5b15b4aef3f9fa4d47967b7bf3f55f6 100644 --- a/drivers/gpu/drm/nouveau/nvc0_fifo.c +++ b/drivers/gpu/drm/nouveau/nvc0_fifo.c @@ -373,7 +373,8 @@ nvc0_fifo_isr_subfifo_intr(struct drm_device *dev, int unit) static void nvc0_fifo_isr(struct drm_device *dev) { - u32 stat = nv_rd32(dev, 0x002100); + u32 mask = nv_rd32(dev, 0x002140); + u32 stat = nv_rd32(dev, 0x002100) & mask; if (stat & 0x00000100) { NV_INFO(dev, "PFIFO: unknown status 0x00000100\n"); diff --git a/drivers/gpu/drm/nouveau/nvc0_pm.c b/drivers/gpu/drm/nouveau/nvc0_pm.c index 7c95c44e2887b870096964d600b98c80a0e16505..4e712b10ebdb682c7956c74a5f3e694ff57e61dd 100644 --- a/drivers/gpu/drm/nouveau/nvc0_pm.c +++ b/drivers/gpu/drm/nouveau/nvc0_pm.c @@ -557,7 +557,7 @@ prog_mem(struct drm_device *dev, struct nvc0_pm_state *info) nouveau_mem_exec(&exec, info->perflvl); if (dev_priv->chipset < 0xd0) - nv_wr32(dev, 0x611200, 0x00003300); + nv_wr32(dev, 0x611200, 0x00003330); else nv_wr32(dev, 0x62c000, 0x03030300); } diff --git a/drivers/gpu/drm/nouveau/nvd0_display.c b/drivers/gpu/drm/nouveau/nvd0_display.c index d0d60e1e7f95bf74c7209f81f6cd205edd8d71a5..8a2fc89b7763cc278c65a2ba20382165cde4a203 100644 --- a/drivers/gpu/drm/nouveau/nvd0_display.c +++ b/drivers/gpu/drm/nouveau/nvd0_display.c @@ -790,7 +790,7 @@ nvd0_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); int ch = EVO_CURS(nv_crtc->index); - evo_piow(crtc->dev, ch, 0x0084, (y << 16) | x); + evo_piow(crtc->dev, ch, 0x0084, (y << 16) | (x & 0xffff)); evo_piow(crtc->dev, ch, 0x0080, 0x00000000); return 0; } @@ -1510,10 +1510,10 @@ nvd0_sor_mode_set(struct drm_encoder *encoder, struct drm_display_mode *umode, case OUTPUT_DP: if (nv_connector->base.display_info.bpc == 6) { nv_encoder->dp.datarate = mode->clock * 18 / 8; - syncs |= 0x00000140; + syncs |= 0x00000002 << 6; } else { nv_encoder->dp.datarate = mode->clock * 24 / 8; - syncs |= 0x00000180; + syncs |= 0x00000005 << 6; } if (nv_encoder->dcb->sorconf.link & 1) diff --git a/drivers/gpu/drm/nouveau/nve0_fifo.c b/drivers/gpu/drm/nouveau/nve0_fifo.c index 1855ecbd843b81161245cfd15ccb1f4e7f8e2343..281bece751b61eb091d2b6da73144dc9d2ddb5c5 100644 --- a/drivers/gpu/drm/nouveau/nve0_fifo.c +++ b/drivers/gpu/drm/nouveau/nve0_fifo.c @@ -294,6 +294,25 @@ nve0_fifo_isr_vm_fault(struct drm_device *dev, int unit) printk(" on channel 0x%010llx\n", (u64)inst << 12); } +static int +nve0_fifo_page_flip(struct drm_device *dev, u32 chid) +{ + struct nve0_fifo_priv *priv = nv_engine(dev, NVOBJ_ENGINE_FIFO); + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_channel *chan = NULL; + unsigned long flags; + int ret = -EINVAL; + + spin_lock_irqsave(&dev_priv->channels.lock, flags); + if (likely(chid >= 0 && chid < priv->base.channels)) { + chan = dev_priv->channels.ptr[chid]; + if (likely(chan)) + ret = nouveau_finish_page_flip(chan, NULL); + } + spin_unlock_irqrestore(&dev_priv->channels.lock, flags); + return ret; +} + static void nve0_fifo_isr_subfifo_intr(struct drm_device *dev, int unit) { @@ -303,11 +322,21 @@ nve0_fifo_isr_subfifo_intr(struct drm_device *dev, int unit) u32 chid = nv_rd32(dev, 0x040120 + (unit * 0x2000)) & 0x7f; u32 subc = (addr & 0x00070000); u32 mthd = (addr & 0x00003ffc); + u32 show = stat; + + if (stat & 0x00200000) { + if (mthd == 0x0054) { + if (!nve0_fifo_page_flip(dev, chid)) + show &= ~0x00200000; + } + } - NV_INFO(dev, "PSUBFIFO %d:", unit); - nouveau_bitfield_print(nve0_fifo_subfifo_intr, stat); - NV_INFO(dev, "PSUBFIFO %d: ch %d subc %d mthd 0x%04x data 0x%08x\n", - unit, chid, subc, mthd, data); + if (show) { + NV_INFO(dev, "PFIFO%d:", unit); + nouveau_bitfield_print(nve0_fifo_subfifo_intr, show); + NV_INFO(dev, "PFIFO%d: ch %d subc %d mthd 0x%04x data 0x%08x\n", + unit, chid, subc, mthd, data); + } nv_wr32(dev, 0x0400c0 + (unit * 0x2000), 0x80600008); nv_wr32(dev, 0x040108 + (unit * 0x2000), stat); @@ -316,7 +345,8 @@ nve0_fifo_isr_subfifo_intr(struct drm_device *dev, int unit) static void nve0_fifo_isr(struct drm_device *dev) { - u32 stat = nv_rd32(dev, 0x002100); + u32 mask = nv_rd32(dev, 0x002140); + u32 stat = nv_rd32(dev, 0x002100) & mask; if (stat & 0x00000100) { NV_INFO(dev, "PFIFO: unknown status 0x00000100\n"); diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 9e6f76fec52789b4931e4e1098b9b52df765c270..2817101fb167eb1f70ac36d88e2f4f1c58dd2427 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -258,8 +258,7 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) radeon_crtc->enabled = true; /* adjust pm to dpms changes BEFORE enabling crtcs */ radeon_pm_compute_clocks(rdev); - /* disable crtc pair power gating before programming */ - if (ASIC_IS_DCE6(rdev)) + if (ASIC_IS_DCE6(rdev) && !radeon_crtc->in_mode_set) atombios_powergate_crtc(crtc, ATOM_DISABLE); atombios_enable_crtc(crtc, ATOM_ENABLE); if (ASIC_IS_DCE3(rdev) && !ASIC_IS_DCE6(rdev)) @@ -278,25 +277,8 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) atombios_enable_crtc_memreq(crtc, ATOM_DISABLE); atombios_enable_crtc(crtc, ATOM_DISABLE); radeon_crtc->enabled = false; - /* power gating is per-pair */ - if (ASIC_IS_DCE6(rdev)) { - struct drm_crtc *other_crtc; - struct radeon_crtc *other_radeon_crtc; - list_for_each_entry(other_crtc, &rdev->ddev->mode_config.crtc_list, head) { - other_radeon_crtc = to_radeon_crtc(other_crtc); - if (((radeon_crtc->crtc_id == 0) && (other_radeon_crtc->crtc_id == 1)) || - ((radeon_crtc->crtc_id == 1) && (other_radeon_crtc->crtc_id == 0)) || - ((radeon_crtc->crtc_id == 2) && (other_radeon_crtc->crtc_id == 3)) || - ((radeon_crtc->crtc_id == 3) && (other_radeon_crtc->crtc_id == 2)) || - ((radeon_crtc->crtc_id == 4) && (other_radeon_crtc->crtc_id == 5)) || - ((radeon_crtc->crtc_id == 5) && (other_radeon_crtc->crtc_id == 4))) { - /* if both crtcs in the pair are off, enable power gating */ - if (other_radeon_crtc->enabled == false) - atombios_powergate_crtc(crtc, ATOM_ENABLE); - break; - } - } - } + if (ASIC_IS_DCE6(rdev) && !radeon_crtc->in_mode_set) + atombios_powergate_crtc(crtc, ATOM_ENABLE); /* adjust pm to dpms changes AFTER disabling crtcs */ radeon_pm_compute_clocks(rdev); break; @@ -444,11 +426,28 @@ union atom_enable_ss { static void atombios_crtc_program_ss(struct radeon_device *rdev, int enable, int pll_id, + int crtc_id, struct radeon_atom_ss *ss) { + unsigned i; int index = GetIndexIntoMasterTable(COMMAND, EnableSpreadSpectrumOnPPLL); union atom_enable_ss args; + if (!enable) { + for (i = 0; i < rdev->num_crtc; i++) { + if (rdev->mode_info.crtcs[i] && + rdev->mode_info.crtcs[i]->enabled && + i != crtc_id && + pll_id == rdev->mode_info.crtcs[i]->pll_id) { + /* one other crtc is using this pll don't turn + * off spread spectrum as it might turn off + * display on active crtc + */ + return; + } + } + } + memset(&args, 0, sizeof(args)); if (ASIC_IS_DCE5(rdev)) { @@ -1028,7 +1027,7 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, &ref_div, &post_div); - atombios_crtc_program_ss(rdev, ATOM_DISABLE, radeon_crtc->pll_id, &ss); + atombios_crtc_program_ss(rdev, ATOM_DISABLE, radeon_crtc->pll_id, radeon_crtc->crtc_id, &ss); atombios_crtc_program_pll(crtc, radeon_crtc->crtc_id, radeon_crtc->pll_id, encoder_mode, radeon_encoder->encoder_id, mode->clock, @@ -1051,7 +1050,7 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode ss.step = step_size; } - atombios_crtc_program_ss(rdev, ATOM_ENABLE, radeon_crtc->pll_id, &ss); + atombios_crtc_program_ss(rdev, ATOM_ENABLE, radeon_crtc->pll_id, radeon_crtc->crtc_id, &ss); } } @@ -1531,12 +1530,12 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) * crtc virtual pixel clock. */ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) { - if (ASIC_IS_DCE5(rdev)) - return ATOM_DCPLL; + if (rdev->clock.dp_extclk) + return ATOM_PPLL_INVALID; else if (ASIC_IS_DCE6(rdev)) return ATOM_PPLL0; - else if (rdev->clock.dp_extclk) - return ATOM_PPLL_INVALID; + else if (ASIC_IS_DCE5(rdev)) + return ATOM_DCPLL; } } } @@ -1572,11 +1571,11 @@ void radeon_atom_disp_eng_pll_init(struct radeon_device *rdev) ASIC_INTERNAL_SS_ON_DCPLL, rdev->clock.default_dispclk); if (ss_enabled) - atombios_crtc_program_ss(rdev, ATOM_DISABLE, ATOM_DCPLL, &ss); + atombios_crtc_program_ss(rdev, ATOM_DISABLE, ATOM_DCPLL, -1, &ss); /* XXX: DCE5, make sure voltage, dispclk is high enough */ atombios_crtc_set_disp_eng_pll(rdev, rdev->clock.default_dispclk); if (ss_enabled) - atombios_crtc_program_ss(rdev, ATOM_ENABLE, ATOM_DCPLL, &ss); + atombios_crtc_program_ss(rdev, ATOM_ENABLE, ATOM_DCPLL, -1, &ss); } } @@ -1635,18 +1634,28 @@ static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc, static void atombios_crtc_prepare(struct drm_crtc *crtc) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + radeon_crtc->in_mode_set = true; /* pick pll */ radeon_crtc->pll_id = radeon_atom_pick_pll(crtc); + /* disable crtc pair power gating before programming */ + if (ASIC_IS_DCE6(rdev)) + atombios_powergate_crtc(crtc, ATOM_DISABLE); + atombios_lock_crtc(crtc, ATOM_ENABLE); atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); } static void atombios_crtc_commit(struct drm_crtc *crtc) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + atombios_crtc_dpms(crtc, DRM_MODE_DPMS_ON); atombios_lock_crtc(crtc, ATOM_DISABLE); + radeon_crtc->in_mode_set = false; } static void atombios_crtc_disable(struct drm_crtc *crtc) @@ -1655,9 +1664,22 @@ static void atombios_crtc_disable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_atom_ss ss; + int i; atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); + for (i = 0; i < rdev->num_crtc; i++) { + if (rdev->mode_info.crtcs[i] && + rdev->mode_info.crtcs[i]->enabled && + i != radeon_crtc->crtc_id && + radeon_crtc->pll_id == rdev->mode_info.crtcs[i]->pll_id) { + /* one other crtc is using this pll don't turn + * off the pll + */ + goto done; + } + } + switch (radeon_crtc->pll_id) { case ATOM_PPLL1: case ATOM_PPLL2: @@ -1674,6 +1696,7 @@ static void atombios_crtc_disable(struct drm_crtc *crtc) default: break; } +done: radeon_crtc->pll_id = -1; } diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 7712cf5ab33b9a107ddf6ef61f1122622a358951..3623b98ed3fe2ab529617e37ceb41dfcf4fd5882 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -577,30 +577,25 @@ int radeon_dp_get_panel_mode(struct drm_encoder *encoder, struct radeon_device *rdev = dev->dev_private; struct radeon_connector *radeon_connector = to_radeon_connector(connector); int panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; + u16 dp_bridge = radeon_connector_encoder_get_dp_bridge_encoder_id(connector); + u8 tmp; if (!ASIC_IS_DCE4(rdev)) return panel_mode; - if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) == - ENCODER_OBJECT_ID_NUTMEG) - panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE; - else if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) == - ENCODER_OBJECT_ID_TRAVIS) { - u8 id[6]; - int i; - for (i = 0; i < 6; i++) - id[i] = radeon_read_dpcd_reg(radeon_connector, 0x503 + i); - if (id[0] == 0x73 && - id[1] == 0x69 && - id[2] == 0x76 && - id[3] == 0x61 && - id[4] == 0x72 && - id[5] == 0x54) + if (dp_bridge != ENCODER_OBJECT_ID_NONE) { + /* DP bridge chips */ + tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP); + if (tmp & 1) + panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; + else if ((dp_bridge == ENCODER_OBJECT_ID_NUTMEG) || + (dp_bridge == ENCODER_OBJECT_ID_TRAVIS)) panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE; else - panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; + panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; } else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { - u8 tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP); + /* eDP */ + tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP); if (tmp & 1) panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; } diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index f9bc27fe269a125b54803350b838a9062f0e6337..6e8803a1170c24b052a0193ce58294605fed01fd 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -1379,6 +1379,8 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder); + struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); struct radeon_connector *radeon_connector = NULL; struct radeon_connector_atom_dig *radeon_dig_connector = NULL; @@ -1390,19 +1392,37 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) switch (mode) { case DRM_MODE_DPMS_ON: - /* some early dce3.2 boards have a bug in their transmitter control table */ - if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730) || - ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) { - if (ASIC_IS_DCE6(rdev)) { - /* It seems we need to call ATOM_ENCODER_CMD_SETUP again - * before reenabling encoder on DPMS ON, otherwise we never - * get picture - */ - atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) { + if (!connector) + dig->panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; + else + dig->panel_mode = radeon_dp_get_panel_mode(encoder, connector); + + /* setup and enable the encoder */ + atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); + atombios_dig_encoder_setup(encoder, + ATOM_ENCODER_CMD_SETUP_PANEL_MODE, + dig->panel_mode); + if (ext_encoder) { + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE61(rdev)) + atombios_external_encoder_setup(encoder, ext_encoder, + EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP); } atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); - } else { + } else if (ASIC_IS_DCE4(rdev)) { + /* setup and enable the encoder */ + atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); + /* enable the transmitter */ + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); + } else { + /* setup and enable the encoder and transmitter */ + atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); + /* some early dce3.2 boards have a bug in their transmitter control table */ + if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730)) + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); } if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) { if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { @@ -1420,10 +1440,19 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: - if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) { + /* disable the transmitter */ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - else + } else if (ASIC_IS_DCE4(rdev)) { + /* disable the transmitter */ + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); + } else { + /* disable the encoder and transmitter */ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); + atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0); + } if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) { if (ASIC_IS_DCE4(rdev)) atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0); @@ -1740,13 +1769,34 @@ static int radeon_atom_pick_dig_encoder(struct drm_encoder *encoder) struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc); struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_encoder *test_encoder; - struct radeon_encoder_atom_dig *dig; + struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; uint32_t dig_enc_in_use = 0; - /* DCE4/5 */ - if (ASIC_IS_DCE4(rdev)) { - dig = radeon_encoder->enc_priv; - if (ASIC_IS_DCE41(rdev)) { + if (ASIC_IS_DCE6(rdev)) { + /* DCE6 */ + switch (radeon_encoder->encoder_id) { + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: + if (dig->linkb) + return 1; + else + return 0; + break; + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: + if (dig->linkb) + return 3; + else + return 2; + break; + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: + if (dig->linkb) + return 5; + else + return 4; + break; + } + } else if (ASIC_IS_DCE4(rdev)) { + /* DCE4/5 */ + if (ASIC_IS_DCE41(rdev) && !ASIC_IS_DCE61(rdev)) { /* ontario follows DCE4 */ if (rdev->family == CHIP_PALM) { if (dig->linkb) @@ -1848,10 +1898,12 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder); radeon_encoder->pixel_clock = adjusted_mode->clock; + /* need to call this here rather than in prepare() since we need some crtc info */ + radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); + if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE4(rdev)) { if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)) atombios_yuv_setup(encoder, true); @@ -1870,38 +1922,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) { - struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); - struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; - - if (!connector) - dig->panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; - else - dig->panel_mode = radeon_dp_get_panel_mode(encoder, connector); - - /* setup and enable the encoder */ - atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); - atombios_dig_encoder_setup(encoder, - ATOM_ENCODER_CMD_SETUP_PANEL_MODE, - dig->panel_mode); - } else if (ASIC_IS_DCE4(rdev)) { - /* disable the transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - /* setup and enable the encoder */ - atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); - - /* enable the transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); - } else { - /* disable the encoder and transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0); - - /* setup and enable the encoder and transmitter */ - atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0); - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0); - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); - } + /* handled in dpms */ break; case ENCODER_OBJECT_ID_INTERNAL_DDI: case ENCODER_OBJECT_ID_INTERNAL_DVO1: @@ -1922,14 +1943,6 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, break; } - if (ext_encoder) { - if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE61(rdev)) - atombios_external_encoder_setup(encoder, ext_encoder, - EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP); - else - atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE); - } - atombios_apply_encoder_quirks(encoder, adjusted_mode); if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) { @@ -2116,7 +2129,6 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) } radeon_atom_output_lock(encoder, true); - radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); if (connector) { struct radeon_connector *radeon_connector = to_radeon_connector(connector); @@ -2137,6 +2149,7 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) static void radeon_atom_encoder_commit(struct drm_encoder *encoder) { + /* need to call this here as we need the crtc set up */ radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_ON); radeon_atom_output_lock(encoder, false); } @@ -2177,14 +2190,7 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder) case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - if (ASIC_IS_DCE4(rdev)) - /* disable the transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - else { - /* disable the encoder and transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0); - } + /* handled in dpms */ break; case ENCODER_OBJECT_ID_INTERNAL_DDI: case ENCODER_OBJECT_ID_INTERNAL_DVO1: diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index e585a3b947eb7c169fe9869aa18880744ab92ef2..e93b80a6d4e969a30cdbbc934d2e8ddd8b8e8a1a 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -1229,24 +1229,8 @@ void evergreen_agp_enable(struct radeon_device *rdev) void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *save) { - save->vga_control[0] = RREG32(D1VGA_CONTROL); - save->vga_control[1] = RREG32(D2VGA_CONTROL); save->vga_render_control = RREG32(VGA_RENDER_CONTROL); save->vga_hdp_control = RREG32(VGA_HDP_CONTROL); - save->crtc_control[0] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET); - save->crtc_control[1] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET); - if (rdev->num_crtc >= 4) { - save->vga_control[2] = RREG32(EVERGREEN_D3VGA_CONTROL); - save->vga_control[3] = RREG32(EVERGREEN_D4VGA_CONTROL); - save->crtc_control[2] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET); - save->crtc_control[3] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET); - } - if (rdev->num_crtc >= 6) { - save->vga_control[4] = RREG32(EVERGREEN_D5VGA_CONTROL); - save->vga_control[5] = RREG32(EVERGREEN_D6VGA_CONTROL); - save->crtc_control[4] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET); - save->crtc_control[5] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); - } /* Stop all video */ WREG32(VGA_RENDER_CONTROL, 0); @@ -1357,47 +1341,6 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s /* Unlock host access */ WREG32(VGA_HDP_CONTROL, save->vga_hdp_control); mdelay(1); - /* Restore video state */ - WREG32(D1VGA_CONTROL, save->vga_control[0]); - WREG32(D2VGA_CONTROL, save->vga_control[1]); - if (rdev->num_crtc >= 4) { - WREG32(EVERGREEN_D3VGA_CONTROL, save->vga_control[2]); - WREG32(EVERGREEN_D4VGA_CONTROL, save->vga_control[3]); - } - if (rdev->num_crtc >= 6) { - WREG32(EVERGREEN_D5VGA_CONTROL, save->vga_control[4]); - WREG32(EVERGREEN_D6VGA_CONTROL, save->vga_control[5]); - } - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 1); - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 1); - if (rdev->num_crtc >= 4) { - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 1); - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 1); - } - if (rdev->num_crtc >= 6) { - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 1); - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 1); - } - WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, save->crtc_control[0]); - WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, save->crtc_control[1]); - if (rdev->num_crtc >= 4) { - WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, save->crtc_control[2]); - WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, save->crtc_control[3]); - } - if (rdev->num_crtc >= 6) { - WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, save->crtc_control[4]); - WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, save->crtc_control[5]); - } - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (rdev->num_crtc >= 4) { - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); - } - if (rdev->num_crtc >= 6) { - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); - } WREG32(VGA_RENDER_CONTROL, save->vga_render_control); } @@ -1986,10 +1929,18 @@ static void evergreen_gpu_init(struct radeon_device *rdev) if (rdev->flags & RADEON_IS_IGP) rdev->config.evergreen.tile_config |= 1 << 4; else { - if ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) - rdev->config.evergreen.tile_config |= 1 << 4; - else + switch ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) { + case 0: /* four banks */ rdev->config.evergreen.tile_config |= 0 << 4; + break; + case 1: /* eight banks */ + rdev->config.evergreen.tile_config |= 1 << 4; + break; + case 2: /* sixteen banks */ + default: + rdev->config.evergreen.tile_config |= 2 << 4; + break; + } } rdev->config.evergreen.tile_config |= 0 << 8; rdev->config.evergreen.tile_config |= diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index c16554122ccd0fb482aa2f03bc93e8b47af55430..e44a62a07fe396f36e70dd6dce1b4460c6786b45 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -788,6 +788,13 @@ static int evergreen_cs_track_validate_texture(struct radeon_cs_parser *p, case V_030000_SQ_TEX_DIM_1D_ARRAY: case V_030000_SQ_TEX_DIM_2D_ARRAY: depth = 1; + break; + case V_030000_SQ_TEX_DIM_2D_MSAA: + case V_030000_SQ_TEX_DIM_2D_ARRAY_MSAA: + surf.nsamples = 1 << llevel; + llevel = 0; + depth = 1; + break; case V_030000_SQ_TEX_DIM_3D: break; default: @@ -961,13 +968,15 @@ static int evergreen_cs_track_check(struct radeon_cs_parser *p) if (track->db_dirty) { /* Check stencil buffer */ - if (G_028800_STENCIL_ENABLE(track->db_depth_control)) { + if (G_028044_FORMAT(track->db_s_info) != V_028044_STENCIL_INVALID && + G_028800_STENCIL_ENABLE(track->db_depth_control)) { r = evergreen_cs_track_validate_stencil(p); if (r) return r; } /* Check depth buffer */ - if (G_028800_Z_ENABLE(track->db_depth_control)) { + if (G_028040_FORMAT(track->db_z_info) != V_028040_Z_INVALID && + G_028800_Z_ENABLE(track->db_depth_control)) { r = evergreen_cs_track_validate_depth(p); if (r) return r; diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index d3bd098e4e19d453aee64b691e6519a0d8c97066..79347855d9bf50cf024a34677ca2a4287f9f3df5 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -1277,6 +1277,8 @@ #define S_028044_FORMAT(x) (((x) & 0x1) << 0) #define G_028044_FORMAT(x) (((x) >> 0) & 0x1) #define C_028044_FORMAT 0xFFFFFFFE +#define V_028044_STENCIL_INVALID 0 +#define V_028044_STENCIL_8 1 #define G_028044_TILE_SPLIT(x) (((x) >> 8) & 0x7) #define DB_Z_READ_BASE 0x28048 #define DB_STENCIL_READ_BASE 0x2804c diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 9945d86d900153b13210bcc967c594c638213f5c..853800e8582f972233dd20f6f6b4573d24f71f2f 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -574,10 +574,18 @@ static void cayman_gpu_init(struct radeon_device *rdev) if (rdev->flags & RADEON_IS_IGP) rdev->config.cayman.tile_config |= 1 << 4; else { - if ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) - rdev->config.cayman.tile_config |= 1 << 4; - else + switch ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) { + case 0: /* four banks */ rdev->config.cayman.tile_config |= 0 << 4; + break; + case 1: /* eight banks */ + rdev->config.cayman.tile_config |= 1 << 4; + break; + case 2: /* sixteen banks */ + default: + rdev->config.cayman.tile_config |= 2 << 4; + break; + } } rdev->config.cayman.tile_config |= ((gb_addr_config & PIPE_INTERLEAVE_SIZE_MASK) >> PIPE_INTERLEAVE_SIZE_SHIFT) << 8; diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 8acb34fd3fd548aa6e34d999682d0f8fafac95fd..8d7e33a0b243585100839905205a5f11ccab5f06 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1182,7 +1182,8 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) ring->ready = true; radeon_ttm_set_active_vram_size(rdev, rdev->mc.real_vram_size); - if (radeon_ring_supports_scratch_reg(rdev, ring)) { + if (!ring->rptr_save_reg /* not resuming from suspend */ + && radeon_ring_supports_scratch_reg(rdev, ring)) { r = radeon_scratch_get(rdev, &ring->rptr_save_reg); if (r) { DRM_ERROR("failed to get scratch reg for rptr save (%d).\n", r); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 637280f541a38492e8a0289e209285e0bb518aaf..d79c639ae739cf68a35039d4ca94357d423c534a 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -3789,3 +3789,23 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) WREG32_PCIE_P(PCIE_LC_LINK_WIDTH_CNTL, link_width_cntl); } } + +/** + * r600_get_gpu_clock - return GPU clock counter snapshot + * + * @rdev: radeon_device pointer + * + * Fetches a GPU clock counter snapshot (R6xx-cayman). + * Returns the 64 bit clock counter snapshot. + */ +uint64_t r600_get_gpu_clock(struct radeon_device *rdev) +{ + uint64_t clock; + + mutex_lock(&rdev->gpu_clock_mutex); + WREG32(RLC_CAPTURE_GPU_CLOCK_COUNT, 1); + clock = (uint64_t)RREG32(RLC_GPU_CLOCK_COUNT_LSB) | + ((uint64_t)RREG32(RLC_GPU_CLOCK_COUNT_MSB) << 32ULL); + mutex_unlock(&rdev->gpu_clock_mutex); + return clock; +} diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index ca87f7afaf2374d02117ec91e479c1e5a385b8d2..f37676d7f217c56373ba55e7c883098b5736d1f7 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -47,18 +47,23 @@ struct r600_cs_track { u32 npipes; /* value we track */ u32 sq_config; + u32 log_nsamples; u32 nsamples; u32 cb_color_base_last[8]; struct radeon_bo *cb_color_bo[8]; u64 cb_color_bo_mc[8]; - u32 cb_color_bo_offset[8]; - struct radeon_bo *cb_color_frag_bo[8]; /* unused */ - struct radeon_bo *cb_color_tile_bo[8]; /* unused */ + u64 cb_color_bo_offset[8]; + struct radeon_bo *cb_color_frag_bo[8]; + u64 cb_color_frag_offset[8]; + struct radeon_bo *cb_color_tile_bo[8]; + u64 cb_color_tile_offset[8]; + u32 cb_color_mask[8]; u32 cb_color_info[8]; u32 cb_color_view[8]; u32 cb_color_size_idx[8]; /* unused */ u32 cb_target_mask; u32 cb_shader_mask; /* unused */ + bool is_resolve; u32 cb_color_size[8]; u32 vgt_strmout_en; u32 vgt_strmout_buffer_en; @@ -311,7 +316,15 @@ static void r600_cs_track_init(struct r600_cs_track *track) track->cb_color_bo[i] = NULL; track->cb_color_bo_offset[i] = 0xFFFFFFFF; track->cb_color_bo_mc[i] = 0xFFFFFFFF; - } + track->cb_color_frag_bo[i] = NULL; + track->cb_color_frag_offset[i] = 0xFFFFFFFF; + track->cb_color_tile_bo[i] = NULL; + track->cb_color_tile_offset[i] = 0xFFFFFFFF; + track->cb_color_mask[i] = 0xFFFFFFFF; + } + track->is_resolve = false; + track->nsamples = 16; + track->log_nsamples = 4; track->cb_target_mask = 0xFFFFFFFF; track->cb_shader_mask = 0xFFFFFFFF; track->cb_dirty = true; @@ -348,11 +361,9 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) volatile u32 *ib = p->ib.ptr; unsigned array_mode; u32 format; + /* When resolve is used, the second colorbuffer has always 1 sample. */ + unsigned nsamples = track->is_resolve && i == 1 ? 1 : track->nsamples; - if (G_0280A0_TILE_MODE(track->cb_color_info[i])) { - dev_warn(p->dev, "FMASK or CMASK buffer are not supported by this kernel\n"); - return -EINVAL; - } size = radeon_bo_size(track->cb_color_bo[i]) - track->cb_color_bo_offset[i]; format = G_0280A0_FORMAT(track->cb_color_info[i]); if (!r600_fmt_is_valid_color(format)) { @@ -375,7 +386,7 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) array_check.group_size = track->group_size; array_check.nbanks = track->nbanks; array_check.npipes = track->npipes; - array_check.nsamples = track->nsamples; + array_check.nsamples = nsamples; array_check.blocksize = r600_fmt_get_blocksize(format); if (r600_get_array_mode_alignment(&array_check, &pitch_align, &height_align, &depth_align, &base_align)) { @@ -420,7 +431,8 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) } /* check offset */ - tmp = r600_fmt_get_nblocksy(format, height) * r600_fmt_get_nblocksx(format, pitch) * r600_fmt_get_blocksize(format); + tmp = r600_fmt_get_nblocksy(format, height) * r600_fmt_get_nblocksx(format, pitch) * + r600_fmt_get_blocksize(format) * nsamples; switch (array_mode) { default: case V_0280A0_ARRAY_LINEAR_GENERAL: @@ -441,7 +453,7 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) * broken userspace. */ } else { - dev_warn(p->dev, "%s offset[%d] %d %d %d %lu too big (%d %d) (%d %d %d)\n", + dev_warn(p->dev, "%s offset[%d] %d %llu %d %lu too big (%d %d) (%d %d %d)\n", __func__, i, array_mode, track->cb_color_bo_offset[i], tmp, radeon_bo_size(track->cb_color_bo[i]), @@ -458,6 +470,51 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) tmp = S_028060_PITCH_TILE_MAX((pitch / 8) - 1) | S_028060_SLICE_TILE_MAX(slice_tile_max - 1); ib[track->cb_color_size_idx[i]] = tmp; + + /* FMASK/CMASK */ + switch (G_0280A0_TILE_MODE(track->cb_color_info[i])) { + case V_0280A0_TILE_DISABLE: + break; + case V_0280A0_FRAG_ENABLE: + if (track->nsamples > 1) { + uint32_t tile_max = G_028100_FMASK_TILE_MAX(track->cb_color_mask[i]); + /* the tile size is 8x8, but the size is in units of bits. + * for bytes, do just * 8. */ + uint32_t bytes = track->nsamples * track->log_nsamples * 8 * (tile_max + 1); + + if (bytes + track->cb_color_frag_offset[i] > + radeon_bo_size(track->cb_color_frag_bo[i])) { + dev_warn(p->dev, "%s FMASK_TILE_MAX too large " + "(tile_max=%u, bytes=%u, offset=%llu, bo_size=%lu)\n", + __func__, tile_max, bytes, + track->cb_color_frag_offset[i], + radeon_bo_size(track->cb_color_frag_bo[i])); + return -EINVAL; + } + } + /* fall through */ + case V_0280A0_CLEAR_ENABLE: + { + uint32_t block_max = G_028100_CMASK_BLOCK_MAX(track->cb_color_mask[i]); + /* One block = 128x128 pixels, one 8x8 tile has 4 bits.. + * (128*128) / (8*8) / 2 = 128 bytes per block. */ + uint32_t bytes = (block_max + 1) * 128; + + if (bytes + track->cb_color_tile_offset[i] > + radeon_bo_size(track->cb_color_tile_bo[i])) { + dev_warn(p->dev, "%s CMASK_BLOCK_MAX too large " + "(block_max=%u, bytes=%u, offset=%llu, bo_size=%lu)\n", + __func__, block_max, bytes, + track->cb_color_tile_offset[i], + radeon_bo_size(track->cb_color_tile_bo[i])); + return -EINVAL; + } + break; + } + default: + dev_warn(p->dev, "%s invalid tile mode\n", __func__); + return -EINVAL; + } return 0; } @@ -566,7 +623,7 @@ static int r600_cs_track_validate_db(struct radeon_cs_parser *p) ntiles = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1; nviews = G_028004_SLICE_MAX(track->db_depth_view) + 1; - tmp = ntiles * bpe * 64 * nviews; + tmp = ntiles * bpe * 64 * nviews * track->nsamples; if ((tmp + track->db_offset) > radeon_bo_size(track->db_bo)) { dev_warn(p->dev, "z/stencil buffer (%d) too small (0x%08X %d %d %d -> %u have %lu)\n", array_mode, @@ -746,6 +803,12 @@ static int r600_cs_track_check(struct radeon_cs_parser *p) */ if (track->cb_dirty) { tmp = track->cb_target_mask; + + /* We must check both colorbuffers for RESOLVE. */ + if (track->is_resolve) { + tmp |= 0xff; + } + for (i = 0; i < 8; i++) { if ((tmp >> (i * 4)) & 0xF) { /* at least one component is enabled */ @@ -764,8 +827,10 @@ static int r600_cs_track_check(struct radeon_cs_parser *p) } /* Check depth buffer */ - if (track->db_dirty && (G_028800_STENCIL_ENABLE(track->db_depth_control) || - G_028800_Z_ENABLE(track->db_depth_control))) { + if (track->db_dirty && + G_028010_FORMAT(track->db_depth_info) != V_028010_DEPTH_INVALID && + (G_028800_STENCIL_ENABLE(track->db_depth_control) || + G_028800_Z_ENABLE(track->db_depth_control))) { r = r600_cs_track_validate_db(p); if (r) return r; @@ -1229,9 +1294,15 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) break; case R_028C04_PA_SC_AA_CONFIG: tmp = G_028C04_MSAA_NUM_SAMPLES(radeon_get_ib_value(p, idx)); + track->log_nsamples = tmp; track->nsamples = 1 << tmp; track->cb_dirty = true; break; + case R_028808_CB_COLOR_CONTROL: + tmp = G_028808_SPECIAL_OP(radeon_get_ib_value(p, idx)); + track->is_resolve = tmp == V_028808_SPECIAL_RESOLVE_BOX; + track->cb_dirty = true; + break; case R_0280A0_CB_COLOR0_INFO: case R_0280A4_CB_COLOR1_INFO: case R_0280A8_CB_COLOR2_INFO: @@ -1310,16 +1381,21 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) dev_err(p->dev, "Broken old userspace ? no cb_color0_base supplied before trying to write 0x%08X\n", reg); return -EINVAL; } - ib[idx] = track->cb_color_base_last[tmp]; track->cb_color_frag_bo[tmp] = track->cb_color_bo[tmp]; + track->cb_color_frag_offset[tmp] = track->cb_color_bo_offset[tmp]; + ib[idx] = track->cb_color_base_last[tmp]; } else { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg); return -EINVAL; } - ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); track->cb_color_frag_bo[tmp] = reloc->robj; + track->cb_color_frag_offset[tmp] = (u64)ib[idx] << 8; + ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + } + if (G_0280A0_TILE_MODE(track->cb_color_info[tmp])) { + track->cb_dirty = true; } break; case R_0280C0_CB_COLOR0_TILE: @@ -1336,16 +1412,35 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) dev_err(p->dev, "Broken old userspace ? no cb_color0_base supplied before trying to write 0x%08X\n", reg); return -EINVAL; } - ib[idx] = track->cb_color_base_last[tmp]; track->cb_color_tile_bo[tmp] = track->cb_color_bo[tmp]; + track->cb_color_tile_offset[tmp] = track->cb_color_bo_offset[tmp]; + ib[idx] = track->cb_color_base_last[tmp]; } else { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg); return -EINVAL; } - ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); track->cb_color_tile_bo[tmp] = reloc->robj; + track->cb_color_tile_offset[tmp] = (u64)ib[idx] << 8; + ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + } + if (G_0280A0_TILE_MODE(track->cb_color_info[tmp])) { + track->cb_dirty = true; + } + break; + case R_028100_CB_COLOR0_MASK: + case R_028104_CB_COLOR1_MASK: + case R_028108_CB_COLOR2_MASK: + case R_02810C_CB_COLOR3_MASK: + case R_028110_CB_COLOR4_MASK: + case R_028114_CB_COLOR5_MASK: + case R_028118_CB_COLOR6_MASK: + case R_02811C_CB_COLOR7_MASK: + tmp = (reg - R_028100_CB_COLOR0_MASK) / 4; + track->cb_color_mask[tmp] = radeon_get_ib_value(p, idx); + if (G_0280A0_TILE_MODE(track->cb_color_info[tmp])) { + track->cb_dirty = true; } break; case CB_COLOR0_BASE: @@ -1490,7 +1585,7 @@ unsigned r600_mip_minify(unsigned size, unsigned level) } static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned llevel, - unsigned w0, unsigned h0, unsigned d0, unsigned format, + unsigned w0, unsigned h0, unsigned d0, unsigned nsamples, unsigned format, unsigned block_align, unsigned height_align, unsigned base_align, unsigned *l0_size, unsigned *mipmap_size) { @@ -1518,7 +1613,7 @@ static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned llevel, depth = r600_mip_minify(d0, i); - size = nbx * nby * blocksize; + size = nbx * nby * blocksize * nsamples; if (nfaces) size *= nfaces; else @@ -1557,13 +1652,14 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, u32 tiling_flags) { struct r600_cs_track *track = p->track; - u32 nfaces, llevel, blevel, w0, h0, d0; - u32 word0, word1, l0_size, mipmap_size, word2, word3; + u32 dim, nfaces, llevel, blevel, w0, h0, d0; + u32 word0, word1, l0_size, mipmap_size, word2, word3, word4, word5; u32 height_align, pitch, pitch_align, depth_align; - u32 array, barray, larray; + u32 barray, larray; u64 base_align; struct array_mode_checker array_check; u32 format; + bool is_array; /* on legacy kernel we don't perform advanced check */ if (p->rdev == NULL) @@ -1581,12 +1677,28 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); } word1 = radeon_get_ib_value(p, idx + 1); + word2 = radeon_get_ib_value(p, idx + 2) << 8; + word3 = radeon_get_ib_value(p, idx + 3) << 8; + word4 = radeon_get_ib_value(p, idx + 4); + word5 = radeon_get_ib_value(p, idx + 5); + dim = G_038000_DIM(word0); w0 = G_038000_TEX_WIDTH(word0) + 1; + pitch = (G_038000_PITCH(word0) + 1) * 8; h0 = G_038004_TEX_HEIGHT(word1) + 1; d0 = G_038004_TEX_DEPTH(word1); + format = G_038004_DATA_FORMAT(word1); + blevel = G_038010_BASE_LEVEL(word4); + llevel = G_038014_LAST_LEVEL(word5); + /* pitch in texels */ + array_check.array_mode = G_038000_TILE_MODE(word0); + array_check.group_size = track->group_size; + array_check.nbanks = track->nbanks; + array_check.npipes = track->npipes; + array_check.nsamples = 1; + array_check.blocksize = r600_fmt_get_blocksize(format); nfaces = 1; - array = 0; - switch (G_038000_DIM(word0)) { + is_array = false; + switch (dim) { case V_038000_SQ_TEX_DIM_1D: case V_038000_SQ_TEX_DIM_2D: case V_038000_SQ_TEX_DIM_3D: @@ -1599,29 +1711,25 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, break; case V_038000_SQ_TEX_DIM_1D_ARRAY: case V_038000_SQ_TEX_DIM_2D_ARRAY: - array = 1; + is_array = true; break; - case V_038000_SQ_TEX_DIM_2D_MSAA: case V_038000_SQ_TEX_DIM_2D_ARRAY_MSAA: + is_array = true; + /* fall through */ + case V_038000_SQ_TEX_DIM_2D_MSAA: + array_check.nsamples = 1 << llevel; + llevel = 0; + break; default: dev_warn(p->dev, "this kernel doesn't support %d texture dim\n", G_038000_DIM(word0)); return -EINVAL; } - format = G_038004_DATA_FORMAT(word1); if (!r600_fmt_is_valid_texture(format, p->family)) { dev_warn(p->dev, "%s:%d texture invalid format %d\n", __func__, __LINE__, format); return -EINVAL; } - /* pitch in texels */ - pitch = (G_038000_PITCH(word0) + 1) * 8; - array_check.array_mode = G_038000_TILE_MODE(word0); - array_check.group_size = track->group_size; - array_check.nbanks = track->nbanks; - array_check.npipes = track->npipes; - array_check.nsamples = 1; - array_check.blocksize = r600_fmt_get_blocksize(format); if (r600_get_array_mode_alignment(&array_check, &pitch_align, &height_align, &depth_align, &base_align)) { dev_warn(p->dev, "%s:%d tex array mode (%d) invalid\n", @@ -1647,24 +1755,17 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, return -EINVAL; } - word2 = radeon_get_ib_value(p, idx + 2) << 8; - word3 = radeon_get_ib_value(p, idx + 3) << 8; - - word0 = radeon_get_ib_value(p, idx + 4); - word1 = radeon_get_ib_value(p, idx + 5); - blevel = G_038010_BASE_LEVEL(word0); - llevel = G_038014_LAST_LEVEL(word1); if (blevel > llevel) { dev_warn(p->dev, "texture blevel %d > llevel %d\n", blevel, llevel); } - if (array == 1) { - barray = G_038014_BASE_ARRAY(word1); - larray = G_038014_LAST_ARRAY(word1); + if (is_array) { + barray = G_038014_BASE_ARRAY(word5); + larray = G_038014_LAST_ARRAY(word5); nfaces = larray - barray + 1; } - r600_texture_size(nfaces, blevel, llevel, w0, h0, d0, format, + r600_texture_size(nfaces, blevel, llevel, w0, h0, d0, array_check.nsamples, format, pitch_align, height_align, base_align, &l0_size, &mipmap_size); /* using get ib will give us the offset into the texture bo */ @@ -1677,7 +1778,6 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, return -EINVAL; } /* using get ib will give us the offset into the mipmap bo */ - word3 = radeon_get_ib_value(p, idx + 3) << 8; if ((mipmap_size + word3) > radeon_bo_size(mipmap)) { /*dev_warn(p->dev, "mipmap bo too small (%d %d %d %d %d %d -> %d have %ld)\n", w0, h0, format, blevel, nlevels, word3, mipmap_size, radeon_bo_size(texture));*/ diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index 4b116ae75fc2cedd41b2e446f1a421b7a085d81b..fa6f37099ba90a6968744f15e4531e7ce3de9d17 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -66,6 +66,14 @@ #define CC_RB_BACKEND_DISABLE 0x98F4 #define BACKEND_DISABLE(x) ((x) << 16) +#define R_028808_CB_COLOR_CONTROL 0x28808 +#define S_028808_SPECIAL_OP(x) (((x) & 0x7) << 4) +#define G_028808_SPECIAL_OP(x) (((x) >> 4) & 0x7) +#define C_028808_SPECIAL_OP 0xFFFFFF8F +#define V_028808_SPECIAL_NORMAL 0x00 +#define V_028808_SPECIAL_DISABLE 0x01 +#define V_028808_SPECIAL_RESOLVE_BOX 0x07 + #define CB_COLOR0_BASE 0x28040 #define CB_COLOR1_BASE 0x28044 #define CB_COLOR2_BASE 0x28048 @@ -92,6 +100,20 @@ #define R_028094_CB_COLOR5_VIEW 0x028094 #define R_028098_CB_COLOR6_VIEW 0x028098 #define R_02809C_CB_COLOR7_VIEW 0x02809C +#define R_028100_CB_COLOR0_MASK 0x028100 +#define S_028100_CMASK_BLOCK_MAX(x) (((x) & 0xFFF) << 0) +#define G_028100_CMASK_BLOCK_MAX(x) (((x) >> 0) & 0xFFF) +#define C_028100_CMASK_BLOCK_MAX 0xFFFFF000 +#define S_028100_FMASK_TILE_MAX(x) (((x) & 0xFFFFF) << 12) +#define G_028100_FMASK_TILE_MAX(x) (((x) >> 12) & 0xFFFFF) +#define C_028100_FMASK_TILE_MAX 0x00000FFF +#define R_028104_CB_COLOR1_MASK 0x028104 +#define R_028108_CB_COLOR2_MASK 0x028108 +#define R_02810C_CB_COLOR3_MASK 0x02810C +#define R_028110_CB_COLOR4_MASK 0x028110 +#define R_028114_CB_COLOR5_MASK 0x028114 +#define R_028118_CB_COLOR6_MASK 0x028118 +#define R_02811C_CB_COLOR7_MASK 0x02811C #define CB_COLOR0_INFO 0x280a0 # define CB_FORMAT(x) ((x) << 2) # define CB_ARRAY_MODE(x) ((x) << 8) @@ -602,6 +624,9 @@ #define RLC_HB_WPTR 0x3f1c #define RLC_HB_WPTR_LSB_ADDR 0x3f14 #define RLC_HB_WPTR_MSB_ADDR 0x3f18 +#define RLC_GPU_CLOCK_COUNT_LSB 0x3f38 +#define RLC_GPU_CLOCK_COUNT_MSB 0x3f3c +#define RLC_CAPTURE_GPU_CLOCK_COUNT 0x3f40 #define RLC_MC_CNTL 0x3f44 #define RLC_UCODE_CNTL 0x3f48 #define RLC_UCODE_ADDR 0x3f2c @@ -1397,6 +1422,9 @@ #define S_0280A0_TILE_MODE(x) (((x) & 0x3) << 18) #define G_0280A0_TILE_MODE(x) (((x) >> 18) & 0x3) #define C_0280A0_TILE_MODE 0xFFF3FFFF +#define V_0280A0_TILE_DISABLE 0 +#define V_0280A0_CLEAR_ENABLE 1 +#define V_0280A0_FRAG_ENABLE 2 #define S_0280A0_BLEND_CLAMP(x) (((x) & 0x1) << 20) #define G_0280A0_BLEND_CLAMP(x) (((x) >> 20) & 0x1) #define C_0280A0_BLEND_CLAMP 0xFFEFFFFF diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 5431af2924083676e7f017d13d2f32a4b9cc1aca..59a15315ae9fd2551e8745736cb15ff0f5e53280 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -142,21 +142,6 @@ struct radeon_device; /* * BIOS. */ -#define ATRM_BIOS_PAGE 4096 - -#if defined(CONFIG_VGA_SWITCHEROO) -bool radeon_atrm_supported(struct pci_dev *pdev); -int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len); -#else -static inline bool radeon_atrm_supported(struct pci_dev *pdev) -{ - return false; -} - -static inline int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len){ - return -EINVAL; -} -#endif bool radeon_get_bios(struct radeon_device *rdev); /* @@ -300,6 +285,7 @@ struct radeon_bo_va { uint64_t soffset; uint64_t eoffset; uint32_t flags; + struct radeon_fence *fence; bool valid; }; @@ -1533,6 +1519,7 @@ struct radeon_device { unsigned debugfs_count; /* virtual memory */ struct radeon_vm_manager vm_manager; + struct mutex gpu_clock_mutex; }; int radeon_device_init(struct radeon_device *rdev, @@ -1733,11 +1720,11 @@ void radeon_ring_write(struct radeon_ring *ring, uint32_t v); #define radeon_pm_finish(rdev) (rdev)->asic->pm.finish((rdev)) #define radeon_pm_init_profile(rdev) (rdev)->asic->pm.init_profile((rdev)) #define radeon_pm_get_dynpm_state(rdev) (rdev)->asic->pm.get_dynpm_state((rdev)) -#define radeon_pre_page_flip(rdev, crtc) rdev->asic->pflip.pre_page_flip((rdev), (crtc)) -#define radeon_page_flip(rdev, crtc, base) rdev->asic->pflip.page_flip((rdev), (crtc), (base)) -#define radeon_post_page_flip(rdev, crtc) rdev->asic->pflip.post_page_flip((rdev), (crtc)) -#define radeon_wait_for_vblank(rdev, crtc) rdev->asic->display.wait_for_vblank((rdev), (crtc)) -#define radeon_mc_wait_for_idle(rdev) rdev->asic->mc_wait_for_idle((rdev)) +#define radeon_pre_page_flip(rdev, crtc) (rdev)->asic->pflip.pre_page_flip((rdev), (crtc)) +#define radeon_page_flip(rdev, crtc, base) (rdev)->asic->pflip.page_flip((rdev), (crtc), (base)) +#define radeon_post_page_flip(rdev, crtc) (rdev)->asic->pflip.post_page_flip((rdev), (crtc)) +#define radeon_wait_for_vblank(rdev, crtc) (rdev)->asic->display.wait_for_vblank((rdev), (crtc)) +#define radeon_mc_wait_for_idle(rdev) (rdev)->asic->mc_wait_for_idle((rdev)) /* Common functions */ /* AGP */ diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index f4af243104387b752638b62809c876970b16ce76..18c38d14c8cd88c70499f2eb03d8a282ca3d68b9 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -255,13 +255,10 @@ extern int rs690_mc_wait_for_idle(struct radeon_device *rdev); * rv515 */ struct rv515_mc_save { - u32 d1vga_control; - u32 d2vga_control; u32 vga_render_control; u32 vga_hdp_control; - u32 d1crtc_control; - u32 d2crtc_control; }; + int rv515_init(struct radeon_device *rdev); void rv515_fini(struct radeon_device *rdev); uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg); @@ -371,6 +368,7 @@ void r600_kms_blit_copy(struct radeon_device *rdev, unsigned num_gpu_pages, struct radeon_sa_bo *vb); int r600_mc_wait_for_idle(struct radeon_device *rdev); +uint64_t r600_get_gpu_clock(struct radeon_device *rdev); /* * rv770,rv730,rv710,rv740 @@ -389,11 +387,10 @@ void r700_cp_fini(struct radeon_device *rdev); * evergreen */ struct evergreen_mc_save { - u32 vga_control[6]; u32 vga_render_control; u32 vga_hdp_control; - u32 crtc_control[6]; }; + void evergreen_pcie_gart_tlb_flush(struct radeon_device *rdev); int evergreen_init(struct radeon_device *rdev); void evergreen_fini(struct radeon_device *rdev); @@ -472,5 +469,6 @@ int si_vm_bind(struct radeon_device *rdev, struct radeon_vm *vm, int id); void si_vm_unbind(struct radeon_device *rdev, struct radeon_vm *vm); void si_vm_tlb_flush(struct radeon_device *rdev, struct radeon_vm *vm); int si_ib_parse(struct radeon_device *rdev, struct radeon_ib *ib); +uint64_t si_get_gpu_clock(struct radeon_device *rdev); #endif diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index b1e3820df36397e9c2ad7a7798be5412c0853df2..d67d4f3eb6f424d5400a7f01c2d1e3068785f02b 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -452,7 +452,7 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev, } /* Fujitsu D3003-S2 board lists DVI-I as DVI-D and VGA */ - if ((dev->pdev->device == 0x9802) && + if (((dev->pdev->device == 0x9802) || (dev->pdev->device == 0x9806)) && (dev->pdev->subsystem_vendor == 0x1734) && (dev->pdev->subsystem_device == 0x11bd)) { if (*connector_type == DRM_MODE_CONNECTOR_VGA) { @@ -1263,6 +1263,8 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) union igp_info { struct _ATOM_INTEGRATED_SYSTEM_INFO info; struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 info_2; + struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 info_6; + struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7 info_7; }; bool radeon_atombios_sideport_present(struct radeon_device *rdev) @@ -1390,27 +1392,50 @@ static void radeon_atombios_get_igp_ss_overrides(struct radeon_device *rdev, struct radeon_mode_info *mode_info = &rdev->mode_info; int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo); u16 data_offset, size; - struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 *igp_info; + union igp_info *igp_info; u8 frev, crev; u16 percentage = 0, rate = 0; /* get any igp specific overrides */ if (atom_parse_data_header(mode_info->atom_context, index, &size, &frev, &crev, &data_offset)) { - igp_info = (struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 *) + igp_info = (union igp_info *) (mode_info->atom_context->bios + data_offset); - switch (id) { - case ASIC_INTERNAL_SS_ON_TMDS: - percentage = le16_to_cpu(igp_info->usDVISSPercentage); - rate = le16_to_cpu(igp_info->usDVISSpreadRateIn10Hz); + switch (crev) { + case 6: + switch (id) { + case ASIC_INTERNAL_SS_ON_TMDS: + percentage = le16_to_cpu(igp_info->info_6.usDVISSPercentage); + rate = le16_to_cpu(igp_info->info_6.usDVISSpreadRateIn10Hz); + break; + case ASIC_INTERNAL_SS_ON_HDMI: + percentage = le16_to_cpu(igp_info->info_6.usHDMISSPercentage); + rate = le16_to_cpu(igp_info->info_6.usHDMISSpreadRateIn10Hz); + break; + case ASIC_INTERNAL_SS_ON_LVDS: + percentage = le16_to_cpu(igp_info->info_6.usLvdsSSPercentage); + rate = le16_to_cpu(igp_info->info_6.usLvdsSSpreadRateIn10Hz); + break; + } break; - case ASIC_INTERNAL_SS_ON_HDMI: - percentage = le16_to_cpu(igp_info->usHDMISSPercentage); - rate = le16_to_cpu(igp_info->usHDMISSpreadRateIn10Hz); + case 7: + switch (id) { + case ASIC_INTERNAL_SS_ON_TMDS: + percentage = le16_to_cpu(igp_info->info_7.usDVISSPercentage); + rate = le16_to_cpu(igp_info->info_7.usDVISSpreadRateIn10Hz); + break; + case ASIC_INTERNAL_SS_ON_HDMI: + percentage = le16_to_cpu(igp_info->info_7.usHDMISSPercentage); + rate = le16_to_cpu(igp_info->info_7.usHDMISSpreadRateIn10Hz); + break; + case ASIC_INTERNAL_SS_ON_LVDS: + percentage = le16_to_cpu(igp_info->info_7.usLvdsSSPercentage); + rate = le16_to_cpu(igp_info->info_7.usLvdsSSpreadRateIn10Hz); + break; + } break; - case ASIC_INTERNAL_SS_ON_LVDS: - percentage = le16_to_cpu(igp_info->usLvdsSSPercentage); - rate = le16_to_cpu(igp_info->usLvdsSSpreadRateIn10Hz); + default: + DRM_ERROR("Unsupported IGP table: %d %d\n", frev, crev); break; } if (percentage) diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 98724fcb00885e8a6ba3e8e88937b209e545a8e8..2a2cf0b88a28b1e7f1c71c4bccbc029adacf63eb 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -30,57 +30,8 @@ static struct radeon_atpx_priv { /* handle for device - and atpx */ acpi_handle dhandle; acpi_handle atpx_handle; - acpi_handle atrm_handle; } radeon_atpx_priv; -/* retrieve the ROM in 4k blocks */ -static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios, - int offset, int len) -{ - acpi_status status; - union acpi_object atrm_arg_elements[2], *obj; - struct acpi_object_list atrm_arg; - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL}; - - atrm_arg.count = 2; - atrm_arg.pointer = &atrm_arg_elements[0]; - - atrm_arg_elements[0].type = ACPI_TYPE_INTEGER; - atrm_arg_elements[0].integer.value = offset; - - atrm_arg_elements[1].type = ACPI_TYPE_INTEGER; - atrm_arg_elements[1].integer.value = len; - - status = acpi_evaluate_object(atrm_handle, NULL, &atrm_arg, &buffer); - if (ACPI_FAILURE(status)) { - printk("failed to evaluate ATRM got %s\n", acpi_format_exception(status)); - return -ENODEV; - } - - obj = (union acpi_object *)buffer.pointer; - memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length); - len = obj->buffer.length; - kfree(buffer.pointer); - return len; -} - -bool radeon_atrm_supported(struct pci_dev *pdev) -{ - /* get the discrete ROM only via ATRM */ - if (!radeon_atpx_priv.atpx_detected) - return false; - - if (radeon_atpx_priv.dhandle == DEVICE_ACPI_HANDLE(&pdev->dev)) - return false; - return true; -} - - -int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len) -{ - return radeon_atrm_call(radeon_atpx_priv.atrm_handle, bios, offset, len); -} - static int radeon_atpx_get_version(acpi_handle handle) { acpi_status status; @@ -198,7 +149,7 @@ static int radeon_atpx_power_state(enum vga_switcheroo_client_id id, static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev) { - acpi_handle dhandle, atpx_handle, atrm_handle; + acpi_handle dhandle, atpx_handle; acpi_status status; dhandle = DEVICE_ACPI_HANDLE(&pdev->dev); @@ -209,13 +160,8 @@ static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev) if (ACPI_FAILURE(status)) return false; - status = acpi_get_handle(dhandle, "ATRM", &atrm_handle); - if (ACPI_FAILURE(status)) - return false; - radeon_atpx_priv.dhandle = dhandle; radeon_atpx_priv.atpx_handle = atpx_handle; - radeon_atpx_priv.atrm_handle = atrm_handle; return true; } diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 501f4881e5aab4d1f1dcb9b57b4ba1a61743d9a7..d306cc8fdeaa918294cf9576e0ab834d05882e87 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -32,6 +32,7 @@ #include #include +#include /* * BIOS. */ @@ -98,16 +99,81 @@ static bool radeon_read_bios(struct radeon_device *rdev) return true; } +#ifdef CONFIG_ACPI /* ATRM is used to get the BIOS on the discrete cards in * dual-gpu systems. */ +/* retrieve the ROM in 4k blocks */ +#define ATRM_BIOS_PAGE 4096 +/** + * radeon_atrm_call - fetch a chunk of the vbios + * + * @atrm_handle: acpi ATRM handle + * @bios: vbios image pointer + * @offset: offset of vbios image data to fetch + * @len: length of vbios image data to fetch + * + * Executes ATRM to fetch a chunk of the discrete + * vbios image on PX systems (all asics). + * Returns the length of the buffer fetched. + */ +static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios, + int offset, int len) +{ + acpi_status status; + union acpi_object atrm_arg_elements[2], *obj; + struct acpi_object_list atrm_arg; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL}; + + atrm_arg.count = 2; + atrm_arg.pointer = &atrm_arg_elements[0]; + + atrm_arg_elements[0].type = ACPI_TYPE_INTEGER; + atrm_arg_elements[0].integer.value = offset; + + atrm_arg_elements[1].type = ACPI_TYPE_INTEGER; + atrm_arg_elements[1].integer.value = len; + + status = acpi_evaluate_object(atrm_handle, NULL, &atrm_arg, &buffer); + if (ACPI_FAILURE(status)) { + printk("failed to evaluate ATRM got %s\n", acpi_format_exception(status)); + return -ENODEV; + } + + obj = (union acpi_object *)buffer.pointer; + memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length); + len = obj->buffer.length; + kfree(buffer.pointer); + return len; +} + static bool radeon_atrm_get_bios(struct radeon_device *rdev) { int ret; int size = 256 * 1024; int i; + struct pci_dev *pdev = NULL; + acpi_handle dhandle, atrm_handle; + acpi_status status; + bool found = false; + + /* ATRM is for the discrete card only */ + if (rdev->flags & RADEON_IS_IGP) + return false; + + while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, pdev)) != NULL) { + dhandle = DEVICE_ACPI_HANDLE(&pdev->dev); + if (!dhandle) + continue; + + status = acpi_get_handle(dhandle, "ATRM", &atrm_handle); + if (!ACPI_FAILURE(status)) { + found = true; + break; + } + } - if (!radeon_atrm_supported(rdev->pdev)) + if (!found) return false; rdev->bios = kmalloc(size, GFP_KERNEL); @@ -117,9 +183,10 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev) } for (i = 0; i < size / ATRM_BIOS_PAGE; i++) { - ret = radeon_atrm_get_bios_chunk(rdev->bios, - (i * ATRM_BIOS_PAGE), - ATRM_BIOS_PAGE); + ret = radeon_atrm_call(atrm_handle, + rdev->bios, + (i * ATRM_BIOS_PAGE), + ATRM_BIOS_PAGE); if (ret < ATRM_BIOS_PAGE) break; } @@ -130,6 +197,12 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev) } return true; } +#else +static inline bool radeon_atrm_get_bios(struct radeon_device *rdev) +{ + return false; +} +#endif static bool ni_read_disabled_bios(struct radeon_device *rdev) { @@ -476,6 +549,61 @@ static bool radeon_read_disabled_bios(struct radeon_device *rdev) return legacy_read_disabled_bios(rdev); } +#ifdef CONFIG_ACPI +static bool radeon_acpi_vfct_bios(struct radeon_device *rdev) +{ + bool ret = false; + struct acpi_table_header *hdr; + acpi_size tbl_size; + UEFI_ACPI_VFCT *vfct; + GOP_VBIOS_CONTENT *vbios; + VFCT_IMAGE_HEADER *vhdr; + + if (!ACPI_SUCCESS(acpi_get_table_with_size("VFCT", 1, &hdr, &tbl_size))) + return false; + if (tbl_size < sizeof(UEFI_ACPI_VFCT)) { + DRM_ERROR("ACPI VFCT table present but broken (too short #1)\n"); + goto out_unmap; + } + + vfct = (UEFI_ACPI_VFCT *)hdr; + if (vfct->VBIOSImageOffset + sizeof(VFCT_IMAGE_HEADER) > tbl_size) { + DRM_ERROR("ACPI VFCT table present but broken (too short #2)\n"); + goto out_unmap; + } + + vbios = (GOP_VBIOS_CONTENT *)((char *)hdr + vfct->VBIOSImageOffset); + vhdr = &vbios->VbiosHeader; + DRM_INFO("ACPI VFCT contains a BIOS for %02x:%02x.%d %04x:%04x, size %d\n", + vhdr->PCIBus, vhdr->PCIDevice, vhdr->PCIFunction, + vhdr->VendorID, vhdr->DeviceID, vhdr->ImageLength); + + if (vhdr->PCIBus != rdev->pdev->bus->number || + vhdr->PCIDevice != PCI_SLOT(rdev->pdev->devfn) || + vhdr->PCIFunction != PCI_FUNC(rdev->pdev->devfn) || + vhdr->VendorID != rdev->pdev->vendor || + vhdr->DeviceID != rdev->pdev->device) { + DRM_INFO("ACPI VFCT table is not for this card\n"); + goto out_unmap; + }; + + if (vfct->VBIOSImageOffset + sizeof(VFCT_IMAGE_HEADER) + vhdr->ImageLength > tbl_size) { + DRM_ERROR("ACPI VFCT image truncated\n"); + goto out_unmap; + } + + rdev->bios = kmemdup(&vbios->VbiosContent, vhdr->ImageLength, GFP_KERNEL); + ret = !!rdev->bios; + +out_unmap: + return ret; +} +#else +static inline bool radeon_acpi_vfct_bios(struct radeon_device *rdev) +{ + return false; +} +#endif bool radeon_get_bios(struct radeon_device *rdev) { @@ -483,6 +611,8 @@ bool radeon_get_bios(struct radeon_device *rdev) uint16_t tmp; r = radeon_atrm_get_bios(rdev); + if (r == false) + r = radeon_acpi_vfct_bios(rdev); if (r == false) r = igp_read_bios_from_vram(rdev); if (r == false) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 576f4f6919f28d075ba0e77365d0a0cc52814f25..f75247d42ffdca3bd62e778f51bba1c6b6d6ab78 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -719,6 +719,34 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde return i2c; } +static struct radeon_i2c_bus_rec radeon_combios_get_i2c_info_from_table(struct radeon_device *rdev) +{ + struct drm_device *dev = rdev->ddev; + struct radeon_i2c_bus_rec i2c; + u16 offset; + u8 id, blocks, clk, data; + int i; + + i2c.valid = false; + + offset = combios_get_table_offset(dev, COMBIOS_I2C_INFO_TABLE); + if (offset) { + blocks = RBIOS8(offset + 2); + for (i = 0; i < blocks; i++) { + id = RBIOS8(offset + 3 + (i * 5) + 0); + if (id == 136) { + clk = RBIOS8(offset + 3 + (i * 5) + 3); + data = RBIOS8(offset + 3 + (i * 5) + 4); + /* gpiopad */ + i2c = combios_setup_i2c_bus(rdev, DDC_MONID, + (1 << clk), (1 << data)); + break; + } + } + } + return i2c; +} + void radeon_combios_i2c_init(struct radeon_device *rdev) { struct drm_device *dev = rdev->ddev; @@ -755,30 +783,14 @@ void radeon_combios_i2c_init(struct radeon_device *rdev) } else if (rdev->family == CHIP_RS300 || rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) { - u16 offset; - u8 id, blocks, clk, data; - int i; - /* 0x68 */ i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0); rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID"); - offset = combios_get_table_offset(dev, COMBIOS_I2C_INFO_TABLE); - if (offset) { - blocks = RBIOS8(offset + 2); - for (i = 0; i < blocks; i++) { - id = RBIOS8(offset + 3 + (i * 5) + 0); - if (id == 136) { - clk = RBIOS8(offset + 3 + (i * 5) + 3); - data = RBIOS8(offset + 3 + (i * 5) + 4); - /* gpiopad */ - i2c = combios_setup_i2c_bus(rdev, DDC_MONID, - (1 << clk), (1 << data)); - rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK"); - break; - } - } - } + /* gpiopad */ + i2c = radeon_combios_get_i2c_info_from_table(rdev); + if (i2c.valid) + rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK"); } else if ((rdev->family == CHIP_R200) || (rdev->family >= CHIP_R300)) { /* 0x68 */ @@ -2321,7 +2333,10 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) connector = (tmp >> 12) & 0xf; ddc_type = (tmp >> 8) & 0xf; - ddc_i2c = combios_setup_i2c_bus(rdev, ddc_type, 0, 0); + if (ddc_type == 5) + ddc_i2c = radeon_combios_get_i2c_info_from_table(rdev); + else + ddc_i2c = combios_setup_i2c_bus(rdev, ddc_type, 0, 0); switch (connector) { case CONNECTOR_PROPRIETARY_LEGACY: diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 8a4c49ef0cc4e40170b3300aa7ad9cffeea2bc72..b4a0db24f4ddc4611028b671499d5062bd713649 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -278,6 +278,30 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) return 0; } +static void radeon_bo_vm_fence_va(struct radeon_cs_parser *parser, + struct radeon_fence *fence) +{ + struct radeon_fpriv *fpriv = parser->filp->driver_priv; + struct radeon_vm *vm = &fpriv->vm; + struct radeon_bo_list *lobj; + + if (parser->chunk_ib_idx == -1) { + return; + } + if ((parser->cs_flags & RADEON_CS_USE_VM) == 0) { + return; + } + + list_for_each_entry(lobj, &parser->validated, tv.head) { + struct radeon_bo_va *bo_va; + struct radeon_bo *rbo = lobj->bo; + + bo_va = radeon_bo_va(rbo, vm); + radeon_fence_unref(&bo_va->fence); + bo_va->fence = radeon_fence_ref(fence); + } +} + /** * cs_parser_fini() - clean parser states * @parser: parser structure holding parsing context. @@ -290,11 +314,14 @@ static void radeon_cs_parser_fini(struct radeon_cs_parser *parser, int error) { unsigned i; - if (!error) + if (!error) { + /* fence all bo va before ttm_eu_fence_buffer_objects so bo are still reserved */ + radeon_bo_vm_fence_va(parser, parser->ib.fence); ttm_eu_fence_buffer_objects(&parser->validated, parser->ib.fence); - else + } else { ttm_eu_backoff_reservation(&parser->validated); + } if (parser->relocs != NULL) { for (i = 0; i < parser->nrelocs; i++) { @@ -388,7 +415,6 @@ static int radeon_cs_ib_vm_chunk(struct radeon_device *rdev, if (parser->chunk_ib_idx == -1) return 0; - if ((parser->cs_flags & RADEON_CS_USE_VM) == 0) return 0; diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c index 711e95ad39bfd600de1be7f94373dc57512ef820..8794744cdf1a58c1c14cb5c0d59dc595f80d05be 100644 --- a/drivers/gpu/drm/radeon/radeon_cursor.c +++ b/drivers/gpu/drm/radeon/radeon_cursor.c @@ -67,7 +67,8 @@ static void radeon_hide_cursor(struct drm_crtc *crtc) if (ASIC_IS_DCE4(rdev)) { WREG32(RADEON_MM_INDEX, EVERGREEN_CUR_CONTROL + radeon_crtc->crtc_offset); - WREG32(RADEON_MM_DATA, EVERGREEN_CURSOR_MODE(EVERGREEN_CURSOR_24_8_PRE_MULT)); + WREG32(RADEON_MM_DATA, EVERGREEN_CURSOR_MODE(EVERGREEN_CURSOR_24_8_PRE_MULT) | + EVERGREEN_CURSOR_URGENT_CONTROL(EVERGREEN_CURSOR_URGENT_1_2)); } else if (ASIC_IS_AVIVO(rdev)) { WREG32(RADEON_MM_INDEX, AVIVO_D1CUR_CONTROL + radeon_crtc->crtc_offset); WREG32(RADEON_MM_DATA, (AVIVO_D1CURSOR_MODE_24BPP << AVIVO_D1CURSOR_MODE_SHIFT)); @@ -94,7 +95,8 @@ static void radeon_show_cursor(struct drm_crtc *crtc) if (ASIC_IS_DCE4(rdev)) { WREG32(RADEON_MM_INDEX, EVERGREEN_CUR_CONTROL + radeon_crtc->crtc_offset); WREG32(RADEON_MM_DATA, EVERGREEN_CURSOR_EN | - EVERGREEN_CURSOR_MODE(EVERGREEN_CURSOR_24_8_PRE_MULT)); + EVERGREEN_CURSOR_MODE(EVERGREEN_CURSOR_24_8_PRE_MULT) | + EVERGREEN_CURSOR_URGENT_CONTROL(EVERGREEN_CURSOR_URGENT_1_2)); } else if (ASIC_IS_AVIVO(rdev)) { WREG32(RADEON_MM_INDEX, AVIVO_D1CUR_CONTROL + radeon_crtc->crtc_offset); WREG32(RADEON_MM_DATA, AVIVO_D1CURSOR_EN | diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 742af8244e898e565aed6bb9fa6dcffe1521dd98..7a3daebd732d67d85d40dc04d6aa851af42aae26 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1009,6 +1009,7 @@ int radeon_device_init(struct radeon_device *rdev, atomic_set(&rdev->ih.lock, 0); mutex_init(&rdev->gem.mutex); mutex_init(&rdev->pm.mutex); + mutex_init(&rdev->gpu_clock_mutex); init_rwsem(&rdev->pm.mclk_lock); init_rwsem(&rdev->exclusive_lock); init_waitqueue_head(&rdev->irq.vblank_queue); @@ -1050,7 +1051,7 @@ int radeon_device_init(struct radeon_device *rdev, if (rdev->flags & RADEON_IS_AGP) rdev->need_dma32 = true; if ((rdev->flags & RADEON_IS_PCI) && - (rdev->family < CHIP_RS400)) + (rdev->family <= CHIP_RS740)) rdev->need_dma32 = true; dma_bits = rdev->need_dma32 ? 32 : 40; @@ -1345,12 +1346,15 @@ int radeon_gpu_reset(struct radeon_device *rdev) for (i = 0; i < RADEON_NUM_RINGS; ++i) { radeon_ring_restore(rdev, &rdev->ring[i], ring_sizes[i], ring_data[i]); + ring_sizes[i] = 0; + ring_data[i] = NULL; } r = radeon_ib_ring_tests(rdev); if (r) { dev_err(rdev->dev, "ib ring test failed (%d).\n", r); if (saved) { + saved = false; radeon_suspend(rdev); goto retry; } diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index dcea6f01ae4e2ec3fe60def4a345c2528d3fedc9..8c593ea82c412b2098d1c3dac3e1f6167356e6fa 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -59,9 +59,14 @@ * 2.15.0 - add max_pipes query * 2.16.0 - fix evergreen 2D tiled surface calculation * 2.17.0 - add STRMOUT_BASE_UPDATE for r7xx + * 2.18.0 - r600-eg: allow "invalid" DB formats + * 2.19.0 - r600-eg: MSAA textures + * 2.20.0 - r600-si: RADEON_INFO_TIMESTAMP query + * 2.21.0 - r600-r700: FMASK and CMASK + * 2.22.0 - r600 only: RESOLVE_BOX allowed */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 17 +#define KMS_DRIVER_MINOR 22 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index 7b737b9339ad41e136a96237817ef099bfae3c10..2a59375dbe5205f64764771de6abfe7184a90be9 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -131,7 +131,7 @@ int radeon_fence_emit(struct radeon_device *rdev, */ void radeon_fence_process(struct radeon_device *rdev, int ring) { - uint64_t seq, last_seq; + uint64_t seq, last_seq, last_emitted; unsigned count_loop = 0; bool wake = false; @@ -158,13 +158,15 @@ void radeon_fence_process(struct radeon_device *rdev, int ring) */ last_seq = atomic64_read(&rdev->fence_drv[ring].last_seq); do { + last_emitted = rdev->fence_drv[ring].sync_seq[ring]; seq = radeon_fence_read(rdev, ring); seq |= last_seq & 0xffffffff00000000LL; if (seq < last_seq) { - seq += 0x100000000LL; + seq &= 0xffffffff; + seq |= last_emitted & 0xffffffff00000000LL; } - if (seq == last_seq) { + if (seq <= last_seq || seq > last_emitted) { break; } /* If we loop over we don't want to return without diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index b3720054614db5199684ad1d86924a1fd5c8f34d..bb3b7fe05ccdfe2905b9dc6650e854e6361dec8c 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -814,7 +814,7 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, return -EINVAL; } - if (bo_va->valid) + if (bo_va->valid && mem) return 0; ngpu_pages = radeon_bo_ngpu_pages(bo); @@ -859,11 +859,27 @@ int radeon_vm_bo_rmv(struct radeon_device *rdev, struct radeon_bo *bo) { struct radeon_bo_va *bo_va; + int r; bo_va = radeon_bo_va(bo, vm); if (bo_va == NULL) return 0; + /* wait for va use to end */ + while (bo_va->fence) { + r = radeon_fence_wait(bo_va->fence, false); + if (r) { + DRM_ERROR("error while waiting for fence: %d\n", r); + } + if (r == -EDEADLK) { + r = radeon_gpu_reset(rdev); + if (!r) + continue; + } + break; + } + radeon_fence_unref(&bo_va->fence); + mutex_lock(&rdev->vm_manager.lock); mutex_lock(&vm->mutex); radeon_vm_bo_update_pte(rdev, vm, bo, NULL); @@ -934,7 +950,7 @@ int radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm) } /** - * radeon_vm_init - tear down a vm instance + * radeon_vm_fini - tear down a vm instance * * @rdev: radeon_device pointer * @vm: requested vm @@ -952,12 +968,15 @@ void radeon_vm_fini(struct radeon_device *rdev, struct radeon_vm *vm) radeon_vm_unbind_locked(rdev, vm); mutex_unlock(&rdev->vm_manager.lock); - /* remove all bo */ + /* remove all bo at this point non are busy any more because unbind + * waited for the last vm fence to signal + */ r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); if (!r) { bo_va = radeon_bo_va(rdev->ring_tmp_bo.bo, vm); list_del_init(&bo_va->bo_list); list_del_init(&bo_va->vm_list); + radeon_fence_unref(&bo_va->fence); radeon_bo_unreserve(rdev->ring_tmp_bo.bo); kfree(bo_va); } @@ -969,6 +988,7 @@ void radeon_vm_fini(struct radeon_device *rdev, struct radeon_vm *vm) r = radeon_bo_reserve(bo_va->bo, false); if (!r) { list_del_init(&bo_va->bo_list); + radeon_fence_unref(&bo_va->fence); radeon_bo_unreserve(bo_va->bo); kfree(bo_va); } diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index 84d045245739eb3b049e78f88693d6dc1dd229da..1b57b0058ad642e6d0d610dadbf7af235f517c71 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -134,25 +134,16 @@ void radeon_gem_object_close(struct drm_gem_object *obj, struct radeon_device *rdev = rbo->rdev; struct radeon_fpriv *fpriv = file_priv->driver_priv; struct radeon_vm *vm = &fpriv->vm; - struct radeon_bo_va *bo_va, *tmp; if (rdev->family < CHIP_CAYMAN) { return; } if (radeon_bo_reserve(rbo, false)) { + dev_err(rdev->dev, "leaking bo va because we fail to reserve bo\n"); return; } - list_for_each_entry_safe(bo_va, tmp, &rbo->va, bo_list) { - if (bo_va->vm == vm) { - /* remove from this vm address space */ - mutex_lock(&vm->mutex); - list_del(&bo_va->vm_list); - mutex_unlock(&vm->mutex); - list_del(&bo_va->bo_list); - kfree(bo_va); - } - } + radeon_vm_bo_rmv(rdev, vm, rbo); radeon_bo_unreserve(rbo); } diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 1d73f16b5d97d4b480d18cf3831e134f66fa5e29..414b4acf69479abdfdcda63f226d112c0e3387da 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -29,6 +29,7 @@ #include "drm_sarea.h" #include "radeon.h" #include "radeon_drm.h" +#include "radeon_asic.h" #include #include @@ -167,17 +168,39 @@ static void radeon_set_filp_rights(struct drm_device *dev, int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) { struct radeon_device *rdev = dev->dev_private; - struct drm_radeon_info *info; + struct drm_radeon_info *info = data; struct radeon_mode_info *minfo = &rdev->mode_info; - uint32_t *value_ptr; - uint32_t value; + uint32_t value, *value_ptr; + uint64_t value64, *value_ptr64; struct drm_crtc *crtc; int i, found; - info = data; + /* TIMESTAMP is a 64-bit value, needs special handling. */ + if (info->request == RADEON_INFO_TIMESTAMP) { + if (rdev->family >= CHIP_R600) { + value_ptr64 = (uint64_t*)((unsigned long)info->value); + if (rdev->family >= CHIP_TAHITI) { + value64 = si_get_gpu_clock(rdev); + } else { + value64 = r600_get_gpu_clock(rdev); + } + + if (DRM_COPY_TO_USER(value_ptr64, &value64, sizeof(value64))) { + DRM_ERROR("copy_to_user %s:%u\n", __func__, __LINE__); + return -EFAULT; + } + return 0; + } else { + DRM_DEBUG_KMS("timestamp is r6xx+ only!\n"); + return -EINVAL; + } + } + value_ptr = (uint32_t *)((unsigned long)info->value); - if (DRM_COPY_FROM_USER(&value, value_ptr, sizeof(value))) + if (DRM_COPY_FROM_USER(&value, value_ptr, sizeof(value))) { + DRM_ERROR("copy_from_user %s:%u\n", __func__, __LINE__); return -EFAULT; + } switch (info->request) { case RADEON_INFO_DEVICE_ID: @@ -337,7 +360,7 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) return -EINVAL; } if (DRM_COPY_TO_USER(value_ptr, &value, sizeof(uint32_t))) { - DRM_ERROR("copy_to_user\n"); + DRM_ERROR("copy_to_user %s:%u\n", __func__, __LINE__); return -EFAULT; } return 0; diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index d5fd615897ec75ad13d8b1b1e7ddd1e85a1a859b..94b4a1c12893baab8ce72854661ed443fea1cfe0 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -1025,9 +1025,11 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc, static void radeon_crtc_prepare(struct drm_crtc *crtc) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct drm_crtc *crtci; + radeon_crtc->in_mode_set = true; /* * The hardware wedges sometimes if you reconfigure one CRTC * whilst another is running (see fdo bug #24611). @@ -1038,6 +1040,7 @@ static void radeon_crtc_prepare(struct drm_crtc *crtc) static void radeon_crtc_commit(struct drm_crtc *crtc) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct drm_crtc *crtci; @@ -1048,6 +1051,7 @@ static void radeon_crtc_commit(struct drm_crtc *crtc) if (crtci->enabled) radeon_crtc_dpms(crtci, DRM_MODE_DPMS_ON); } + radeon_crtc->in_mode_set = false; } static const struct drm_crtc_helper_funcs legacy_helper_funcs = { diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index f380d59c5763425f0fc0bd79a8733d15bcfdca33..d56978949f34927169cf3db6a832361f2139cb4b 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -275,6 +275,7 @@ struct radeon_crtc { u16 lut_r[256], lut_g[256], lut_b[256]; bool enabled; bool can_tile; + bool in_mode_set; uint32_t crtc_offset; struct drm_gem_object *cursor_bo; uint64_t cursor_addr; diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 1f1a4c803c1dd267158dece882e8fdf5b2d6b871..9024e72228396068208d51e8dbf13fd8a8676307 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -52,11 +52,7 @@ void radeon_bo_clear_va(struct radeon_bo *bo) list_for_each_entry_safe(bo_va, tmp, &bo->va, bo_list) { /* remove from all vm address space */ - mutex_lock(&bo_va->vm->mutex); - list_del(&bo_va->vm_list); - mutex_unlock(&bo_va->vm->mutex); - list_del(&bo_va->bo_list); - kfree(bo_va); + radeon_vm_bo_rmv(bo->rdev, bo_va->vm, bo); } } @@ -136,6 +132,7 @@ int radeon_bo_create(struct radeon_device *rdev, acc_size = ttm_bo_dma_acc_size(&rdev->mman.bdev, size, sizeof(struct radeon_bo)); +retry: bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL); if (bo == NULL) return -ENOMEM; @@ -149,8 +146,6 @@ int radeon_bo_create(struct radeon_device *rdev, bo->surface_reg = -1; INIT_LIST_HEAD(&bo->list); INIT_LIST_HEAD(&bo->va); - -retry: radeon_ttm_placement_from_domain(bo, domain); /* Kernel allocation are uninterruptible */ down_read(&rdev->pm.mclk_lock); diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index ec79b37504306f2709036bebe6949f7afc2a90cf..43c431a2686db86428059593dc3f853d87688d9c 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -706,6 +706,7 @@ int radeon_ring_init(struct radeon_device *rdev, struct radeon_ring *ring, unsig if (radeon_debugfs_ring_init(rdev, ring)) { DRM_ERROR("Failed to register debugfs file for rings !\n"); } + radeon_ring_lockup_update(ring); return 0; } diff --git a/drivers/gpu/drm/radeon/reg_srcs/r600 b/drivers/gpu/drm/radeon/reg_srcs/r600 index 5e659b034d9a379d362327541480b2eeef70bf61..20bfbda7b3f1bdcf0eff27332bf2b9812af696b4 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/r600 +++ b/drivers/gpu/drm/radeon/reg_srcs/r600 @@ -744,15 +744,6 @@ r600 0x9400 0x00028C38 CB_CLRCMP_DST 0x00028C3C CB_CLRCMP_MSK 0x00028C34 CB_CLRCMP_SRC -0x00028100 CB_COLOR0_MASK -0x00028104 CB_COLOR1_MASK -0x00028108 CB_COLOR2_MASK -0x0002810C CB_COLOR3_MASK -0x00028110 CB_COLOR4_MASK -0x00028114 CB_COLOR5_MASK -0x00028118 CB_COLOR6_MASK -0x0002811C CB_COLOR7_MASK -0x00028808 CB_COLOR_CONTROL 0x0002842C CB_FOG_BLUE 0x00028428 CB_FOG_GREEN 0x00028424 CB_FOG_RED diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index a12fbcc8ccb6834a9fba7b0d5cb08418538b52e9..aa8ef491ef3c17619ee9f1e64dd8262c5e74e103 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -281,12 +281,8 @@ int rv515_debugfs_ga_info_init(struct radeon_device *rdev) void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save) { - save->d1vga_control = RREG32(R_000330_D1VGA_CONTROL); - save->d2vga_control = RREG32(R_000338_D2VGA_CONTROL); save->vga_render_control = RREG32(R_000300_VGA_RENDER_CONTROL); save->vga_hdp_control = RREG32(R_000328_VGA_HDP_CONTROL); - save->d1crtc_control = RREG32(R_006080_D1CRTC_CONTROL); - save->d2crtc_control = RREG32(R_006880_D2CRTC_CONTROL); /* Stop all video */ WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); @@ -311,15 +307,6 @@ void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save) /* Unlock host access */ WREG32(R_000328_VGA_HDP_CONTROL, save->vga_hdp_control); mdelay(1); - /* Restore video state */ - WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control); - WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control); - WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1); - WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1); - WREG32(R_006080_D1CRTC_CONTROL, save->d1crtc_control); - WREG32(R_006880_D2CRTC_CONTROL, save->d2crtc_control); - WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0); - WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); WREG32(R_000300_VGA_RENDER_CONTROL, save->vga_render_control); } diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index c053f8193771a1df17cfa092cabf15caaff880db..0139e227e3c7241712c5ed951f38b52f5120c564 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -1639,11 +1639,19 @@ static void si_gpu_init(struct radeon_device *rdev) /* XXX what about 12? */ rdev->config.si.tile_config |= (3 << 0); break; - } - if ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) - rdev->config.si.tile_config |= 1 << 4; - else + } + switch ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) { + case 0: /* four banks */ rdev->config.si.tile_config |= 0 << 4; + break; + case 1: /* eight banks */ + rdev->config.si.tile_config |= 1 << 4; + break; + case 2: /* sixteen banks */ + default: + rdev->config.si.tile_config |= 2 << 4; + break; + } rdev->config.si.tile_config |= ((gb_addr_config & PIPE_INTERLEAVE_SIZE_MASK) >> PIPE_INTERLEAVE_SIZE_SHIFT) << 8; rdev->config.si.tile_config |= @@ -3960,3 +3968,22 @@ void si_fini(struct radeon_device *rdev) rdev->bios = NULL; } +/** + * si_get_gpu_clock - return GPU clock counter snapshot + * + * @rdev: radeon_device pointer + * + * Fetches a GPU clock counter snapshot (SI). + * Returns the 64 bit clock counter snapshot. + */ +uint64_t si_get_gpu_clock(struct radeon_device *rdev) +{ + uint64_t clock; + + mutex_lock(&rdev->gpu_clock_mutex); + WREG32(RLC_CAPTURE_GPU_CLOCK_COUNT, 1); + clock = (uint64_t)RREG32(RLC_GPU_CLOCK_COUNT_LSB) | + ((uint64_t)RREG32(RLC_GPU_CLOCK_COUNT_MSB) << 32ULL); + mutex_unlock(&rdev->gpu_clock_mutex); + return clock; +} diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h index 7869089e87619562663ca96c1c035c74b7dba710..ef4815c27b1c673e50ab9d675382586686b6495d 100644 --- a/drivers/gpu/drm/radeon/sid.h +++ b/drivers/gpu/drm/radeon/sid.h @@ -698,6 +698,9 @@ #define RLC_UCODE_ADDR 0xC32C #define RLC_UCODE_DATA 0xC330 +#define RLC_GPU_CLOCK_COUNT_LSB 0xC338 +#define RLC_GPU_CLOCK_COUNT_MSB 0xC33C +#define RLC_CAPTURE_GPU_CLOCK_COUNT 0xC340 #define RLC_MC_CNTL 0xC344 #define RLC_UCODE_CNTL 0xC348 diff --git a/drivers/gpu/drm/savage/savage_drv.c b/drivers/gpu/drm/savage/savage_drv.c index d31d4cca9a4c7425609cf92d9e8fcb5a512cc4f0..c5a164337bd5deaf7fd85f15b94f0f8b21fbba88 100644 --- a/drivers/gpu/drm/savage/savage_drv.c +++ b/drivers/gpu/drm/savage/savage_drv.c @@ -43,6 +43,9 @@ static const struct file_operations savage_driver_fops = { .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/sis/sis_drv.c b/drivers/gpu/drm/sis/sis_drv.c index 7f119870147c04cee307eaded5e6bf1abfba2bff..867dc03000e62007f470fc963706369d7411b90c 100644 --- a/drivers/gpu/drm/sis/sis_drv.c +++ b/drivers/gpu/drm/sis/sis_drv.c @@ -74,6 +74,9 @@ static const struct file_operations sis_driver_fops = { .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/tdfx/tdfx_drv.c b/drivers/gpu/drm/tdfx/tdfx_drv.c index 90f6b13acfac416270ac5abb70fa919cf66b611a..a7f4d6bd1330de6ad9e5878be70019d3e6ebf2df 100644 --- a/drivers/gpu/drm/tdfx/tdfx_drv.c +++ b/drivers/gpu/drm/tdfx/tdfx_drv.c @@ -49,6 +49,9 @@ static const struct file_operations tdfx_driver_fops = { .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/udl/Kconfig b/drivers/gpu/drm/udl/Kconfig index 0b5e096d39a6a7b590b55acd63ad30a21f241081..56e0bf31d425a6f90f7ad6cc9f2a9c4cbb993739 100644 --- a/drivers/gpu/drm/udl/Kconfig +++ b/drivers/gpu/drm/udl/Kconfig @@ -1,6 +1,7 @@ config DRM_UDL tristate "DisplayLink" depends on DRM && EXPERIMENTAL + depends on USB_ARCH_HAS_HCD select DRM_USB select FB_SYS_FILLRECT select FB_SYS_COPYAREA diff --git a/drivers/gpu/drm/udl/udl_connector.c b/drivers/gpu/drm/udl/udl_connector.c index ba055e9ca0077875a3a49d3533d729a95ccf98fd..8d9dc44f1f94f56c32234fdb527576f7817433ad 100644 --- a/drivers/gpu/drm/udl/udl_connector.c +++ b/drivers/gpu/drm/udl/udl_connector.c @@ -69,6 +69,13 @@ static int udl_get_modes(struct drm_connector *connector) static int udl_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct udl_device *udl = connector->dev->dev_private; + if (!udl->sku_pixel_limit) + return 0; + + if (mode->vdisplay * mode->hdisplay > udl->sku_pixel_limit) + return MODE_VIRTUAL_Y; + return 0; } diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c index 6e52069894b35d91037474521e5ebf6e2f157e98..9f84128505bb420703745d426f0cdba4c8a46ab6 100644 --- a/drivers/gpu/drm/udl/udl_drv.c +++ b/drivers/gpu/drm/udl/udl_drv.c @@ -66,6 +66,9 @@ static const struct file_operations udl_driver_fops = { .unlocked_ioctl = drm_ioctl, .release = drm_release, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/udl/udl_gem.c b/drivers/gpu/drm/udl/udl_gem.c index 7bd65bdd15a8092e955d959c08fd6dd04781d490..291ecc1455850400f6e596cde59dfac1acda83d4 100644 --- a/drivers/gpu/drm/udl/udl_gem.c +++ b/drivers/gpu/drm/udl/udl_gem.c @@ -308,7 +308,7 @@ struct drm_gem_object *udl_gem_prime_import(struct drm_device *dev, /* need to attach */ attach = dma_buf_attach(dma_buf, dev->dev); if (IS_ERR(attach)) - return ERR_PTR(PTR_ERR(attach)); + return ERR_CAST(attach); sg = dma_buf_map_attachment(attach, DMA_BIDIRECTIONAL); if (IS_ERR(sg)) { diff --git a/drivers/gpu/drm/udl/udl_modeset.c b/drivers/gpu/drm/udl/udl_modeset.c index f5dd89e891de0c165541178c2f0c6a7c74964303..9159d48d1dfd570521c43755596466788411beba 100644 --- a/drivers/gpu/drm/udl/udl_modeset.c +++ b/drivers/gpu/drm/udl/udl_modeset.c @@ -354,8 +354,7 @@ static int udl_crtc_mode_set(struct drm_crtc *crtc, static void udl_crtc_disable(struct drm_crtc *crtc) { - - + udl_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); } static void udl_crtc_destroy(struct drm_crtc *crtc) diff --git a/drivers/gpu/drm/via/via_drv.c b/drivers/gpu/drm/via/via_drv.c index e927b4c052f52a4ed2e73a296354a0e84c849f20..af1b914b17e399a8de2265bd8cbdff32ed553a06 100644 --- a/drivers/gpu/drm/via/via_drv.c +++ b/drivers/gpu/drm/via/via_drv.c @@ -65,6 +65,9 @@ static const struct file_operations via_driver_fops = { .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/vmwgfx/Kconfig b/drivers/gpu/drm/vmwgfx/Kconfig index 794ff67c5701386ce781abe5c0f91e42de150e26..b71bcd0bfbbf65a60dea1ea47beef41daddb7d8c 100644 --- a/drivers/gpu/drm/vmwgfx/Kconfig +++ b/drivers/gpu/drm/vmwgfx/Kconfig @@ -12,3 +12,11 @@ config DRM_VMWGFX This is a KMS enabled DRM driver for the VMware SVGA2 virtual hardware. The compiled module will be called "vmwgfx.ko". + +config DRM_VMWGFX_FBCON + depends on DRM_VMWGFX + bool "Enable framebuffer console under vmwgfx by default" + help + Choose this option if you are shipping a new vmwgfx + userspace driver that supports using the kernel driver. + diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 4d9edead01acdbcb900a3fdca87d5ed08cdab682..ba2c35dbf10e3a7c90095d3fce4265dd3cfd14ff 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -182,8 +182,9 @@ static struct pci_device_id vmw_pci_id_list[] = { {0x15ad, 0x0405, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VMWGFX_CHIP_SVGAII}, {0, 0, 0} }; +MODULE_DEVICE_TABLE(pci, vmw_pci_id_list); -static int enable_fbdev; +static int enable_fbdev = IS_ENABLED(CONFIG_DRM_VMWGFX_FBCON); static int vmw_probe(struct pci_dev *, const struct pci_device_id *); static void vmw_master_init(struct vmw_master *); @@ -1154,6 +1155,11 @@ static struct drm_driver driver = { .open = vmw_driver_open, .preclose = vmw_preclose, .postclose = vmw_postclose, + + .dumb_create = vmw_dumb_create, + .dumb_map_offset = vmw_dumb_map_offset, + .dumb_destroy = vmw_dumb_destroy, + .fops = &vmwgfx_driver_fops, .name = VMWGFX_DRIVER_NAME, .desc = VMWGFX_DRIVER_DESC, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index d0f2c079ee2732d62f064b2667747412b5b6fb1c..29c984ff7f23aed1012e70d7e3e0744c1d1fa026 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -645,6 +645,16 @@ int vmw_kms_readback(struct vmw_private *dev_priv, int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); +int vmw_dumb_create(struct drm_file *file_priv, + struct drm_device *dev, + struct drm_mode_create_dumb *args); + +int vmw_dumb_map_offset(struct drm_file *file_priv, + struct drm_device *dev, uint32_t handle, + uint64_t *offset); +int vmw_dumb_destroy(struct drm_file *file_priv, + struct drm_device *dev, + uint32_t handle); /** * Overlay control - vmwgfx_overlay.c */ diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c index f2fb8f15e2f127b350e33c210d2b91d44ed09134..7e0743358dffdf5176d2aa48a393beb21803c6cd 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c @@ -1018,7 +1018,7 @@ int vmw_event_fence_action_create(struct drm_file *file_priv, } - event = kzalloc(sizeof(event->event), GFP_KERNEL); + event = kzalloc(sizeof(*event), GFP_KERNEL); if (unlikely(event == NULL)) { DRM_ERROR("Failed to allocate an event.\n"); ret = -ENOMEM; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 6b0078ffa7638b163abb2a286e6b8d579daae4a5..c50724bd30f6e052e2f80e6f823379241944ff60 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1688,15 +1688,19 @@ int vmw_du_page_flip(struct drm_crtc *crtc, struct vmw_private *dev_priv = vmw_priv(crtc->dev); struct drm_framebuffer *old_fb = crtc->fb; struct vmw_framebuffer *vfb = vmw_framebuffer_to_vfb(fb); - struct drm_file *file_priv = event->base.file_priv; + struct drm_file *file_priv ; struct vmw_fence_obj *fence = NULL; struct drm_clip_rect clips; int ret; + if (event == NULL) + return -EINVAL; + /* require ScreenObject support for page flipping */ if (!dev_priv->sou_priv) return -ENOSYS; + file_priv = event->base.file_priv; if (!vmw_kms_screen_object_flippable(dev_priv, crtc)) return -EINVAL; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 22bf9a21ec7137a38735feea3c131ce72f156516..2c6ffe0e2c07828bc7b07e3a9bf55b71e7d438f6 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -1917,3 +1917,76 @@ int vmw_user_stream_lookup(struct vmw_private *dev_priv, vmw_resource_unreference(&res); return ret; } + + +int vmw_dumb_create(struct drm_file *file_priv, + struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + struct vmw_private *dev_priv = vmw_priv(dev); + struct vmw_master *vmaster = vmw_master(file_priv->master); + struct vmw_user_dma_buffer *vmw_user_bo; + struct ttm_buffer_object *tmp; + int ret; + + args->pitch = args->width * ((args->bpp + 7) / 8); + args->size = args->pitch * args->height; + + vmw_user_bo = kzalloc(sizeof(*vmw_user_bo), GFP_KERNEL); + if (vmw_user_bo == NULL) + return -ENOMEM; + + ret = ttm_read_lock(&vmaster->lock, true); + if (ret != 0) { + kfree(vmw_user_bo); + return ret; + } + + ret = vmw_dmabuf_init(dev_priv, &vmw_user_bo->dma, args->size, + &vmw_vram_sys_placement, true, + &vmw_user_dmabuf_destroy); + if (ret != 0) + goto out_no_dmabuf; + + tmp = ttm_bo_reference(&vmw_user_bo->dma.base); + ret = ttm_base_object_init(vmw_fpriv(file_priv)->tfile, + &vmw_user_bo->base, + false, + ttm_buffer_type, + &vmw_user_dmabuf_release, NULL); + if (unlikely(ret != 0)) + goto out_no_base_object; + + args->handle = vmw_user_bo->base.hash.key; + +out_no_base_object: + ttm_bo_unref(&tmp); +out_no_dmabuf: + ttm_read_unlock(&vmaster->lock); + return ret; +} + +int vmw_dumb_map_offset(struct drm_file *file_priv, + struct drm_device *dev, uint32_t handle, + uint64_t *offset) +{ + struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; + struct vmw_dma_buffer *out_buf; + int ret; + + ret = vmw_user_dmabuf_lookup(tfile, handle, &out_buf); + if (ret != 0) + return -EINVAL; + + *offset = out_buf->base.addr_space_offset; + vmw_dmabuf_unreference(&out_buf); + return 0; +} + +int vmw_dumb_destroy(struct drm_file *file_priv, + struct drm_device *dev, + uint32_t handle) +{ + return ttm_ref_object_base_unref(vmw_fpriv(file_priv)->tfile, + handle, TTM_REF_USAGE); +} diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index 5b3c7d135dc91c407fc9b2bf19b2e3e912ccfed5..e25cf31faab2b10a027d3f3c860887214ba431d1 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -70,27 +70,12 @@ static struct vgasr_priv vgasr_priv = { .clients = LIST_HEAD_INIT(vgasr_priv.clients), }; -int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler) -{ - mutex_lock(&vgasr_mutex); - if (vgasr_priv.handler) { - mutex_unlock(&vgasr_mutex); - return -EINVAL; - } - - vgasr_priv.handler = handler; - mutex_unlock(&vgasr_mutex); - return 0; -} -EXPORT_SYMBOL(vga_switcheroo_register_handler); - -void vga_switcheroo_unregister_handler(void) +static bool vga_switcheroo_ready(void) { - mutex_lock(&vgasr_mutex); - vgasr_priv.handler = NULL; - mutex_unlock(&vgasr_mutex); + /* we're ready if we get two clients + handler */ + return !vgasr_priv.active && + vgasr_priv.registered_clients == 2 && vgasr_priv.handler; } -EXPORT_SYMBOL(vga_switcheroo_unregister_handler); static void vga_switcheroo_enable(void) { @@ -98,7 +83,8 @@ static void vga_switcheroo_enable(void) struct vga_switcheroo_client *client; /* call the handler to init */ - vgasr_priv.handler->init(); + if (vgasr_priv.handler->init) + vgasr_priv.handler->init(); list_for_each_entry(client, &vgasr_priv.clients, list) { if (client->id != -1) @@ -113,6 +99,37 @@ static void vga_switcheroo_enable(void) vgasr_priv.active = true; } +int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler) +{ + mutex_lock(&vgasr_mutex); + if (vgasr_priv.handler) { + mutex_unlock(&vgasr_mutex); + return -EINVAL; + } + + vgasr_priv.handler = handler; + if (vga_switcheroo_ready()) { + printk(KERN_INFO "vga_switcheroo: enabled\n"); + vga_switcheroo_enable(); + } + mutex_unlock(&vgasr_mutex); + return 0; +} +EXPORT_SYMBOL(vga_switcheroo_register_handler); + +void vga_switcheroo_unregister_handler(void) +{ + mutex_lock(&vgasr_mutex); + vgasr_priv.handler = NULL; + if (vgasr_priv.active) { + pr_info("vga_switcheroo: disabled\n"); + vga_switcheroo_debugfs_fini(&vgasr_priv); + vgasr_priv.active = false; + } + mutex_unlock(&vgasr_mutex); +} +EXPORT_SYMBOL(vga_switcheroo_unregister_handler); + static int register_client(struct pci_dev *pdev, const struct vga_switcheroo_client_ops *ops, int id, bool active) @@ -134,9 +151,7 @@ static int register_client(struct pci_dev *pdev, if (client_is_vga(client)) vgasr_priv.registered_clients++; - /* if we get two clients + handler */ - if (!vgasr_priv.active && - vgasr_priv.registered_clients == 2 && vgasr_priv.handler) { + if (vga_switcheroo_ready()) { printk(KERN_INFO "vga_switcheroo: enabled\n"); vga_switcheroo_enable(); } diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 60ea284407cea4d1f62db43a72b3e6cdbea47e31..8bcd168fffaebbf80808fa9ee9c02e42384eb1f5 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -996,7 +996,8 @@ static void hid_process_event(struct hid_device *hid, struct hid_field *field, struct hid_driver *hdrv = hid->driver; int ret; - hid_dump_input(hid, usage, value); + if (!list_empty(&hid->debug_list)) + hid_dump_input(hid, usage, value); if (hdrv && hdrv->event && hid_match_usage(hid, usage)) { ret = hdrv->event(hid, field, usage, value); @@ -1558,7 +1559,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) }, - { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) }, +#if IS_ENABLED(CONFIG_HID_LENOVO_TPKBD) + { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) }, +#endif { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) }, @@ -1624,7 +1627,6 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) }, { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) }, - { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ARVO) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ISKU) }, diff --git a/drivers/hid/hid-lenovo-tpkbd.c b/drivers/hid/hid-lenovo-tpkbd.c index 77d2df04c97b0dbe6c34eb11b9e566ae07d5ae28..60c4e1e85913fd435ba7c3fe977db50e4fb00f6c 100644 --- a/drivers/hid/hid-lenovo-tpkbd.c +++ b/drivers/hid/hid-lenovo-tpkbd.c @@ -519,6 +519,8 @@ static void tpkbd_remove_tp(struct hid_device *hdev) led_classdev_unregister(&data_pointer->led_mute); hid_set_drvdata(hdev, NULL); + kfree(data_pointer->led_micmute.name); + kfree(data_pointer->led_mute.name); kfree(data_pointer); } diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 0f9c146fc00d7391932bcaef9df70e4fbc55541e..9500f2f3f8fea702432e683a56dc0eea53dbf3fe 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -193,6 +193,7 @@ static struct hid_ll_driver logi_dj_ll_driver; static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf, size_t count, unsigned char report_type); +static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev); static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev, struct dj_report *dj_report) @@ -233,6 +234,7 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev, if (dj_report->report_params[DEVICE_PAIRED_PARAM_SPFUNCTION] & SPFUNCTION_DEVICE_LIST_EMPTY) { dbg_hid("%s: device list is empty\n", __func__); + djrcv_dev->querying_devices = false; return; } @@ -243,6 +245,12 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev, return; } + if (djrcv_dev->paired_dj_devices[dj_report->device_index]) { + /* The device is already known. No need to reallocate it. */ + dbg_hid("%s: device is already known\n", __func__); + return; + } + dj_hiddev = hid_allocate_device(); if (IS_ERR(dj_hiddev)) { dev_err(&djrcv_hdev->dev, "%s: hid_allocate_device failed\n", @@ -306,6 +314,7 @@ static void delayedwork_callback(struct work_struct *work) struct dj_report dj_report; unsigned long flags; int count; + int retval; dbg_hid("%s\n", __func__); @@ -338,6 +347,25 @@ static void delayedwork_callback(struct work_struct *work) logi_dj_recv_destroy_djhid_device(djrcv_dev, &dj_report); break; default: + /* A normal report (i. e. not belonging to a pair/unpair notification) + * arriving here, means that the report arrived but we did not have a + * paired dj_device associated to the report's device_index, this + * means that the original "device paired" notification corresponding + * to this dj_device never arrived to this driver. The reason is that + * hid-core discards all packets coming from a device while probe() is + * executing. */ + if (!djrcv_dev->paired_dj_devices[dj_report.device_index]) { + /* ok, we don't know the device, just re-ask the + * receiver for the list of connected devices. */ + retval = logi_dj_recv_query_paired_devices(djrcv_dev); + if (!retval) { + /* everything went fine, so just leave */ + break; + } + dev_err(&djrcv_dev->hdev->dev, + "%s:logi_dj_recv_query_paired_devices " + "error:%d\n", __func__, retval); + } dbg_hid("%s: unexpected report type\n", __func__); } } @@ -368,6 +396,12 @@ static void logi_dj_recv_forward_null_report(struct dj_receiver_dev *djrcv_dev, if (!djdev) { dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]" " is NULL, index %d\n", dj_report->device_index); + kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report)); + + if (schedule_work(&djrcv_dev->work) == 0) { + dbg_hid("%s: did not schedule the work item, was already " + "queued\n", __func__); + } return; } @@ -398,6 +432,12 @@ static void logi_dj_recv_forward_report(struct dj_receiver_dev *djrcv_dev, if (dj_device == NULL) { dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]" " is NULL, index %d\n", dj_report->device_index); + kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report)); + + if (schedule_work(&djrcv_dev->work) == 0) { + dbg_hid("%s: did not schedule the work item, was already " + "queued\n", __func__); + } return; } @@ -439,7 +479,11 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) struct dj_report *dj_report; int retval; - dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL); + /* no need to protect djrcv_dev->querying_devices */ + if (djrcv_dev->querying_devices) + return 0; + + dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) return -ENOMEM; dj_report->report_id = REPORT_ID_DJ_SHORT; @@ -450,13 +494,14 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) return retval; } + static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, unsigned timeout) { struct dj_report *dj_report; int retval; - dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL); + dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) return -ENOMEM; dj_report->report_id = REPORT_ID_DJ_SHORT; diff --git a/drivers/hid/hid-logitech-dj.h b/drivers/hid/hid-logitech-dj.h index fd28a5e0ca3b84b8407791421b25f8b17bf7815a..4a4000340ce1ed8cf6be1f81ee8e0f21d8ba5f5a 100644 --- a/drivers/hid/hid-logitech-dj.h +++ b/drivers/hid/hid-logitech-dj.h @@ -101,6 +101,7 @@ struct dj_receiver_dev { struct work_struct work; struct kfifo notif_fifo; spinlock_t lock; + bool querying_devices; }; struct dj_device { diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 903eef3d3e10034f8e36974ba4e95ee746438702..991e85c7325c849d4e7c287afe28364a8e3351e6 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -70,6 +70,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET }, { USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS }, diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index a220e5746d67df8922f7421b2ee0b174d6ae949b..4748086eaaf26ad41bd3b2fb0c7e40be4a34e054 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -545,8 +545,7 @@ static int vmbus_bus_init(int irq) if (ret) goto err_cleanup; - ret = request_irq(irq, vmbus_isr, IRQF_SAMPLE_RANDOM, - driver_name, hv_acpi_dev); + ret = request_irq(irq, vmbus_isr, 0, driver_name, hv_acpi_dev); if (ret != 0) { pr_err("Unable to request IRQ %d\n", diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c index cfec802cf9ca949b705d24a1d862a702af223193..f915eb1c29f7030e0612c80812e2b32ba25334b4 100644 --- a/drivers/hwmon/ad7314.c +++ b/drivers/hwmon/ad7314.c @@ -87,10 +87,18 @@ static ssize_t ad7314_show_temperature(struct device *dev, } } +static ssize_t ad7314_show_name(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + return sprintf(buf, "%s\n", to_spi_device(dev)->modalias); +} + +static DEVICE_ATTR(name, S_IRUGO, ad7314_show_name, NULL); static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ad7314_show_temperature, NULL, 0); static struct attribute *ad7314_attributes[] = { + &dev_attr_name.attr, &sensor_dev_attr_temp1_input.dev_attr.attr, NULL, }; diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c index e65c6e45d36b05a24241680558fd2012be3f3c85..7bf4ce3d405e4903e26c010cc9040ce87e7067ba 100644 --- a/drivers/hwmon/ads7871.c +++ b/drivers/hwmon/ads7871.c @@ -139,6 +139,12 @@ static ssize_t show_voltage(struct device *dev, } } +static ssize_t ads7871_show_name(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + return sprintf(buf, "%s\n", to_spi_device(dev)->modalias); +} + static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_voltage, NULL, 0); static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 1); static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 2); @@ -148,6 +154,8 @@ static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 5); static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 6); static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 7); +static DEVICE_ATTR(name, S_IRUGO, ads7871_show_name, NULL); + static struct attribute *ads7871_attributes[] = { &sensor_dev_attr_in0_input.dev_attr.attr, &sensor_dev_attr_in1_input.dev_attr.attr, @@ -157,6 +165,7 @@ static struct attribute *ads7871_attributes[] = { &sensor_dev_attr_in5_input.dev_attr.attr, &sensor_dev_attr_in6_input.dev_attr.attr, &sensor_dev_attr_in7_input.dev_attr.attr, + &dev_attr_name.attr, NULL }; diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 282708860517e8de41e2f86c3aeb55a118aaca17..8f3f6f2c45fd1a5ba95664a4ba92a6ffe7e6323c 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -53,10 +53,10 @@ #define APPLESMC_MAX_DATA_LENGTH 32 -/* wait up to 32 ms for a status change. */ +/* wait up to 128 ms for a status change. */ #define APPLESMC_MIN_WAIT 0x0010 #define APPLESMC_RETRY_WAIT 0x0100 -#define APPLESMC_MAX_WAIT 0x8000 +#define APPLESMC_MAX_WAIT 0x20000 #define APPLESMC_READ_CMD 0x10 #define APPLESMC_WRITE_CMD 0x11 diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index 351d1f4593e7a8276da3ff7cdd9b286d4ea2b097..4ee5789487233dbe6bf03920fa29fb820d366b8d 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -34,6 +34,12 @@ static const struct dmi_system_id __initconst atk_force_new_if[] = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "SABERTOOTH X58") } + }, { + /* Old interface reads the same sensor for fan0 and fan1 */ + .ident = "Asus M5A78L", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "M5A78L") + } }, { } }; diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index faa16f80db9cf652bbc75aaa7e5fd0e73b788ca4..984a3f13923b615b7c6849cd59b396689680ed20 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -196,7 +196,7 @@ struct tjmax { int tjmax; }; -static struct tjmax __cpuinitconst tjmax_table[] = { +static const struct tjmax __cpuinitconst tjmax_table[] = { { "CPU D410", 100000 }, { "CPU D425", 100000 }, { "CPU D510", 100000 }, @@ -815,17 +815,20 @@ static int __init coretemp_init(void) if (err) goto exit; + get_online_cpus(); for_each_online_cpu(i) get_core_online(i); #ifndef CONFIG_HOTPLUG_CPU if (list_empty(&pdev_list)) { + put_online_cpus(); err = -ENODEV; goto exit_driver_unreg; } #endif register_hotcpu_notifier(&coretemp_cpu_notifier); + put_online_cpus(); return 0; #ifndef CONFIG_HOTPLUG_CPU @@ -840,6 +843,7 @@ static void __exit coretemp_exit(void) { struct pdev_entry *p, *n; + get_online_cpus(); unregister_hotcpu_notifier(&coretemp_cpu_notifier); mutex_lock(&pdev_list_mutex); list_for_each_entry_safe(p, n, &pdev_list, list) { @@ -848,6 +852,7 @@ static void __exit coretemp_exit(void) kfree(p); } mutex_unlock(&pdev_list_mutex); + put_online_cpus(); platform_driver_unregister(&coretemp_driver); } diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index 2764b78a784b9be83f9df1fd48f558452d9b8d61..af69073b3fe87a323e8986f76268c3ec1aa78522 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -129,12 +129,12 @@ static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4) * counter saturations resulting in bogus power readings. * We correct this value ourselves to cope with older BIOSes. */ -static DEFINE_PCI_DEVICE_TABLE(affected_device) = { +static const struct pci_device_id affected_device[] = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, { 0 } }; -static void __devinit tweak_runavg_range(struct pci_dev *pdev) +static void tweak_runavg_range(struct pci_dev *pdev) { u32 val; @@ -158,6 +158,16 @@ static void __devinit tweak_runavg_range(struct pci_dev *pdev) REG_TDP_RUNNING_AVERAGE, val); } +#ifdef CONFIG_PM +static int fam15h_power_resume(struct pci_dev *pdev) +{ + tweak_runavg_range(pdev); + return 0; +} +#else +#define fam15h_power_resume NULL +#endif + static void __devinit fam15h_power_init_data(struct pci_dev *f4, struct fam15h_power_data *data) { @@ -256,6 +266,7 @@ static struct pci_driver fam15h_power_driver = { .id_table = fam15h_power_id_table, .probe = fam15h_power_probe, .remove = __devexit_p(fam15h_power_remove), + .resume = fam15h_power_resume, }; module_pci_driver(fam15h_power_driver); diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index 7f3f4a385729375c002409387d157f3565b30e04..602148299f68db03a81683ab95c14e39614e5d8d 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -69,22 +69,6 @@ struct ina2xx_data { u16 regs[INA2XX_MAX_REGISTERS]; }; -int ina2xx_read_word(struct i2c_client *client, int reg) -{ - int val = i2c_smbus_read_word_data(client, reg); - if (unlikely(val < 0)) { - dev_dbg(&client->dev, - "Failed to read register: %d\n", reg); - return val; - } - return be16_to_cpu(val); -} - -void ina2xx_write_word(struct i2c_client *client, int reg, int data) -{ - i2c_smbus_write_word_data(client, reg, cpu_to_be16(data)); -} - static struct ina2xx_data *ina2xx_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -102,7 +86,7 @@ static struct ina2xx_data *ina2xx_update_device(struct device *dev) /* Read all registers */ for (i = 0; i < data->registers; i++) { - int rv = ina2xx_read_word(client, i); + int rv = i2c_smbus_read_word_swapped(client, i); if (rv < 0) { ret = ERR_PTR(rv); goto abort; @@ -279,22 +263,26 @@ static int ina2xx_probe(struct i2c_client *client, switch (data->kind) { case ina219: /* device configuration */ - ina2xx_write_word(client, INA2XX_CONFIG, INA219_CONFIG_DEFAULT); + i2c_smbus_write_word_swapped(client, INA2XX_CONFIG, + INA219_CONFIG_DEFAULT); /* set current LSB to 1mA, shunt is in uOhms */ /* (equation 13 in datasheet) */ - ina2xx_write_word(client, INA2XX_CALIBRATION, 40960000 / shunt); + i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION, + 40960000 / shunt); dev_info(&client->dev, "power monitor INA219 (Rshunt = %li uOhm)\n", shunt); data->registers = INA219_REGISTERS; break; case ina226: /* device configuration */ - ina2xx_write_word(client, INA2XX_CONFIG, INA226_CONFIG_DEFAULT); + i2c_smbus_write_word_swapped(client, INA2XX_CONFIG, + INA226_CONFIG_DEFAULT); /* set current LSB to 1mA, shunt is in uOhms */ /* (equation 1 in datasheet)*/ - ina2xx_write_word(client, INA2XX_CALIBRATION, 5120000 / shunt); + i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION, + 5120000 / shunt); dev_info(&client->dev, "power monitor INA226 (Rshunt = %li uOhm)\n", shunt); data->registers = INA226_REGISTERS; diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c index 0018c7dd0097de5045f646d98e715713ea7edba4..1a174f0a3cdeb9bd854d13fa61171a63c33e41d7 100644 --- a/drivers/hwmon/twl4030-madc-hwmon.c +++ b/drivers/hwmon/twl4030-madc-hwmon.c @@ -44,12 +44,13 @@ static ssize_t madc_read(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct twl4030_madc_request req; + struct twl4030_madc_request req = { + .channels = 1 << attr->index, + .method = TWL4030_MADC_SW2, + .type = TWL4030_MADC_WAIT, + }; long val; - req.channels = (1 << attr->index); - req.method = TWL4030_MADC_SW2; - req.func_cb = NULL; val = twl4030_madc_conversion(&req); if (val < 0) return val; diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c index ee4ebc198a9448e868f45af079e8f3d5f51968ae..2e56c6ce9fb654cb0532f4cbef756fd99f618e9d 100644 --- a/drivers/hwmon/via-cputemp.c +++ b/drivers/hwmon/via-cputemp.c @@ -328,6 +328,7 @@ static int __init via_cputemp_init(void) if (err) goto exit; + get_online_cpus(); for_each_online_cpu(i) { struct cpuinfo_x86 *c = &cpu_data(i); @@ -347,12 +348,14 @@ static int __init via_cputemp_init(void) #ifndef CONFIG_HOTPLUG_CPU if (list_empty(&pdev_list)) { + put_online_cpus(); err = -ENODEV; goto exit_driver_unreg; } #endif register_hotcpu_notifier(&via_cputemp_cpu_notifier); + put_online_cpus(); return 0; #ifndef CONFIG_HOTPLUG_CPU @@ -367,6 +370,7 @@ static void __exit via_cputemp_exit(void) { struct pdev_entry *p, *n; + get_online_cpus(); unregister_hotcpu_notifier(&via_cputemp_cpu_notifier); mutex_lock(&pdev_list_mutex); list_for_each_entry_safe(p, n, &pdev_list, list) { @@ -375,6 +379,7 @@ static void __exit via_cputemp_exit(void) kfree(p); } mutex_unlock(&pdev_list_mutex); + put_online_cpus(); platform_driver_unregister(&via_cputemp_driver); } diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index ab4825205a9db30436404c64a9ee4d79acc2d535..5b1a6a666441f242ac63f21d9b9359464ced3f97 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -1206,7 +1206,7 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, int err = -ENODEV; u16 val; - static const __initdata char *names[] = { + static __initconst char *const names[] = { "W83627HF", "W83627THF", "W83697HF", diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c index 1201a15784c3a0eec329affa6f6edf1546df0b51..db713c0dfba4d6c6272ac19c79b793595a9cdad7 100644 --- a/drivers/hwspinlock/hwspinlock_core.c +++ b/drivers/hwspinlock/hwspinlock_core.c @@ -552,7 +552,7 @@ EXPORT_SYMBOL_GPL(hwspin_lock_request_specific); */ int hwspin_lock_free(struct hwspinlock *hwlock) { - struct device *dev = hwlock->bank->dev; + struct device *dev; struct hwspinlock *tmp; int ret; @@ -561,6 +561,7 @@ int hwspin_lock_free(struct hwspinlock *hwlock) return -EINVAL; } + dev = hwlock->bank->dev; mutex_lock(&hwspinlock_tree_lock); /* make sure the hwspinlock is used */ diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 73133b1063f012416d2a957f3fc2432ace395439..6f5f98d69af7c26b2fd7b895106e11745ce7d155 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -476,17 +476,17 @@ static int pca_init(struct i2c_adapter *adap) /* To avoid integer overflow, use clock/100 for calculations */ clock = pca_clock(pca_data) / 100; - if (pca_data->i2c_clock > 10000) { + if (pca_data->i2c_clock > 1000000) { mode = I2C_PCA_MODE_TURBO; min_tlow = 14; min_thi = 5; raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */ - } else if (pca_data->i2c_clock > 4000) { + } else if (pca_data->i2c_clock > 400000) { mode = I2C_PCA_MODE_FASTP; min_tlow = 17; min_thi = 9; raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */ - } else if (pca_data->i2c_clock > 1000) { + } else if (pca_data->i2c_clock > 100000) { mode = I2C_PCA_MODE_FAST; min_tlow = 44; min_thi = 20; diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index b4aaa1bd6728503b629acea078f3021fc148115a..970a1612e795566f007ccebe2b6ae811131694c9 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -104,6 +104,7 @@ config I2C_I801 DH89xxCC (PCH) Panther Point (PCH) Lynx Point (PCH) + Lynx Point-LP (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. @@ -354,9 +355,13 @@ config I2C_DAVINCI devices such as DaVinci NIC. For details please see http://www.ti.com/davinci +config I2C_DESIGNWARE_CORE + tristate + config I2C_DESIGNWARE_PLATFORM tristate "Synopsys DesignWare Platform" depends on HAVE_CLK + select I2C_DESIGNWARE_CORE help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. @@ -367,6 +372,7 @@ config I2C_DESIGNWARE_PLATFORM config I2C_DESIGNWARE_PCI tristate "Synopsys DesignWare PCI" depends on PCI + select I2C_DESIGNWARE_CORE help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index ce3c2be7fb40a6cb453a92a9cc1eb89da510383f..37c4182cc98bb28520eeb1ce579bb3b601cffc01 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -33,10 +33,11 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o +obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o -i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o +i2c-designware-platform-objs := i2c-designware-platdrv.o obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o -i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o +i2c-designware-pci-objs := i2c-designware-pcidrv.o obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 1e48bec80edfb08a0628cc816004c1955075fc42..7b8ebbefb581156ee8dd795cd6c4d458e37367f7 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -25,6 +25,7 @@ * ---------------------------------------------------------------------------- * */ +#include #include #include #include @@ -316,6 +317,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev) dw_writel(dev, dev->master_cfg , DW_IC_CON); return 0; } +EXPORT_SYMBOL_GPL(i2c_dw_init); /* * Waiting for bus not busy @@ -568,12 +570,14 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) return ret; } +EXPORT_SYMBOL_GPL(i2c_dw_xfer); u32 i2c_dw_func(struct i2c_adapter *adap) { struct dw_i2c_dev *dev = i2c_get_adapdata(adap); return dev->functionality; } +EXPORT_SYMBOL_GPL(i2c_dw_func); static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) { @@ -678,17 +682,20 @@ irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) return IRQ_HANDLED; } +EXPORT_SYMBOL_GPL(i2c_dw_isr); void i2c_dw_enable(struct dw_i2c_dev *dev) { /* Enable the adapter */ dw_writel(dev, 1, DW_IC_ENABLE); } +EXPORT_SYMBOL_GPL(i2c_dw_enable); u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev) { return dw_readl(dev, DW_IC_ENABLE); } +EXPORT_SYMBOL_GPL(i2c_dw_is_enabled); void i2c_dw_disable(struct dw_i2c_dev *dev) { @@ -699,18 +706,22 @@ void i2c_dw_disable(struct dw_i2c_dev *dev) dw_writel(dev, 0, DW_IC_INTR_MASK); dw_readl(dev, DW_IC_CLR_INTR); } +EXPORT_SYMBOL_GPL(i2c_dw_disable); void i2c_dw_clear_int(struct dw_i2c_dev *dev) { dw_readl(dev, DW_IC_CLR_INTR); } +EXPORT_SYMBOL_GPL(i2c_dw_clear_int); void i2c_dw_disable_int(struct dw_i2c_dev *dev) { dw_writel(dev, 0, DW_IC_INTR_MASK); } +EXPORT_SYMBOL_GPL(i2c_dw_disable_int); u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) { return dw_readl(dev, DW_IC_COMP_PARAM_1); } +EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param); diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c index aedb94f34bf748c1e82846f817264c1f73b2e602..dae3ddfe7619cf69899d974992ea0e7b43264b59 100644 --- a/drivers/i2c/busses/i2c-diolan-u2c.c +++ b/drivers/i2c/busses/i2c-diolan-u2c.c @@ -405,6 +405,7 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, } } } + ret = num; abort: sret = diolan_i2c_stop(dev); if (sret < 0 && ret >= 0) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 898dcf9c7adeaac26d932b6e8c6a6e8d90e9be66..33e9b0c09af208762f7f8f58b4c3895798618233 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -52,6 +52,7 @@ DH89xxCC (PCH) 0x2330 32 hard yes yes yes Panther Point (PCH) 0x1e22 32 hard yes yes yes Lynx Point (PCH) 0x8c22 32 hard yes yes yes + Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes Features supported by this driver: Software PEC no @@ -155,6 +156,7 @@ #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 struct i801_priv { struct i2c_adapter adapter; @@ -771,6 +773,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 088c5c1ed17dfe831c4345ee8f02dd0ef4e1c82d..51f05b8520edb3f95b983d5002859afd386586e4 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -365,10 +365,6 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) struct device_node *node = dev->of_node; int ret; - if (!node) - return -EINVAL; - - i2c->speed = &mxs_i2c_95kHz_config; ret = of_property_read_u32(node, "clock-frequency", &speed); if (ret) dev_warn(dev, "No I2C speed selected, using 100kHz\n"); @@ -419,10 +415,13 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) return err; i2c->dev = dev; + i2c->speed = &mxs_i2c_95kHz_config; - err = mxs_i2c_get_ofdata(i2c); - if (err) - return err; + if (dev->of_node) { + err = mxs_i2c_get_ofdata(i2c); + if (err) + return err; + } platform_set_drvdata(pdev, i2c); diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 5e6f1eed4f83f233da76202c70d7564f773d3e1c..61b00edacb08179894c83b91d1f0cbe39a768b37 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -350,10 +350,6 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) i2c_clk = clk_get_rate(dev->clk); - /* fallback to std. mode if machine has not provided it */ - if (dev->cfg.clk_freq == 0) - dev->cfg.clk_freq = 100000; - /* * The spec says, in case of std. mode the divider is * 2 whereas it is 3 for fast and fastplus mode of @@ -911,20 +907,32 @@ static const struct i2c_algorithm nmk_i2c_algo = { .functionality = nmk_i2c_functionality }; +static struct nmk_i2c_controller u8500_i2c = { + /* + * Slave data setup time; 250ns, 100ns, and 10ns, which + * is 14, 6 and 2 respectively for a 48Mhz i2c clock. + */ + .slsu = 0xe, + .tft = 1, /* Tx FIFO threshold */ + .rft = 8, /* Rx FIFO threshold */ + .clk_freq = 400000, /* fast mode operation */ + .timeout = 200, /* Slave response timeout(ms) */ + .sm = I2C_FREQ_MODE_FAST, +}; + static atomic_t adapter_id = ATOMIC_INIT(0); static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) { int ret = 0; - struct nmk_i2c_controller *pdata = - adev->dev.platform_data; + struct nmk_i2c_controller *pdata = adev->dev.platform_data; struct nmk_i2c_dev *dev; struct i2c_adapter *adap; - if (!pdata) { - dev_warn(&adev->dev, "no platform data\n"); - return -ENODEV; - } + if (!pdata) + /* No i2c configuration found, using the default. */ + pdata = &u8500_i2c; + dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL); if (!dev) { dev_err(&adev->dev, "cannot allocate memory\n"); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 6849635b268a81fe8f85d380d2d80d16ba6ab2b1..5d19a49803c152089c85b5b51c4d83cbb7a91cda 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -584,7 +584,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) r = pm_runtime_get_sync(dev->dev); if (IS_ERR_VALUE(r)) - return r; + goto out; r = omap_i2c_wait_for_bb(dev); if (r < 0) diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c index 07b7447ecbc9102c7721e27727ab7d25223f35d8..3d71395ae1f763d47ea11f33ba55eeab6ef7c174 100644 --- a/drivers/i2c/busses/i2c-pmcmsp.c +++ b/drivers/i2c/busses/i2c-pmcmsp.c @@ -306,8 +306,7 @@ static int __devinit pmcmsptwi_probe(struct platform_device *pldev) pmcmsptwi_data.irq = platform_get_irq(pldev, 0); if (pmcmsptwi_data.irq) { rc = request_irq(pmcmsptwi_data.irq, &pmcmsptwi_interrupt, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, - pldev->name, &pmcmsptwi_data); + IRQF_SHARED, pldev->name, &pmcmsptwi_data); if (rc == 0) { /* * Enable 'DONE' interrupt only. diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 5d54416770b01e7816cc85cd7dcbf403bf407442..8488bddfe46596109249edd242a3ad0ebc7cfe8b 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -48,8 +48,9 @@ enum { mcntrl_afie = 0x00000002, mcntrl_naie = 0x00000004, mcntrl_drmie = 0x00000008, - mcntrl_daie = 0x00000020, - mcntrl_rffie = 0x00000040, + mcntrl_drsie = 0x00000010, + mcntrl_rffie = 0x00000020, + mcntrl_daie = 0x00000040, mcntrl_tffie = 0x00000080, mcntrl_reset = 0x00000100, mcntrl_cdbmode = 0x00000400, @@ -290,31 +291,37 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data) * or we didn't 'ask' for it yet. */ if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) { - dev_dbg(&alg_data->adapter.dev, - "%s(): Write dummy data to fill Rx-fifo...\n", - __func__); + /* 'Asking' is done asynchronously, e.g. dummy TX of several + * bytes is done before the first actual RX arrives in FIFO. + * Therefore, ordered bytes (via TX) are counted separately. + */ + if (alg_data->mif.order) { + dev_dbg(&alg_data->adapter.dev, + "%s(): Write dummy data to fill Rx-fifo...\n", + __func__); - if (alg_data->mif.len == 1) { - /* Last byte, do not acknowledge next rcv. */ - val |= stop_bit; + if (alg_data->mif.order == 1) { + /* Last byte, do not acknowledge next rcv. */ + val |= stop_bit; + + /* + * Enable interrupt RFDAIE (data in Rx fifo), + * and disable DRMIE (need data for Tx) + */ + ctl = ioread32(I2C_REG_CTL(alg_data)); + ctl |= mcntrl_rffie | mcntrl_daie; + ctl &= ~mcntrl_drmie; + iowrite32(ctl, I2C_REG_CTL(alg_data)); + } /* - * Enable interrupt RFDAIE (data in Rx fifo), - * and disable DRMIE (need data for Tx) + * Now we'll 'ask' for data: + * For each byte we want to receive, we must + * write a (dummy) byte to the Tx-FIFO. */ - ctl = ioread32(I2C_REG_CTL(alg_data)); - ctl |= mcntrl_rffie | mcntrl_daie; - ctl &= ~mcntrl_drmie; - iowrite32(ctl, I2C_REG_CTL(alg_data)); + iowrite32(val, I2C_REG_TX(alg_data)); + alg_data->mif.order--; } - - /* - * Now we'll 'ask' for data: - * For each byte we want to receive, we must - * write a (dummy) byte to the Tx-FIFO. - */ - iowrite32(val, I2C_REG_TX(alg_data)); - return 0; } @@ -514,6 +521,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) alg_data->mif.buf = pmsg->buf; alg_data->mif.len = pmsg->len; + alg_data->mif.order = pmsg->len; alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ? I2C_SMBUS_READ : I2C_SMBUS_WRITE; alg_data->mif.ret = 0; @@ -566,6 +574,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) /* Cleanup to be sure... */ alg_data->mif.buf = NULL; alg_data->mif.len = 0; + alg_data->mif.order = 0; dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n", __func__, ioread32(I2C_REG_STS(alg_data))); diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 66eb53fac2022363c3cf90fa96d0ad6358234acc..9a08c57bc9369eea10b7419a8d52f6c08812f270 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -712,7 +712,7 @@ static int __devexit tegra_i2c_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int tegra_i2c_suspend(struct device *dev) { struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 2efa56c5ff2c32d10ff3018def5bc077b8492e4e..2091ae8f539a5e78ee59338cd29876109b22883d 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -636,6 +636,22 @@ static void i2c_adapter_dev_release(struct device *dev) complete(&adap->dev_released); } +/* + * This function is only needed for mutex_lock_nested, so it is never + * called unless locking correctness checking is enabled. Thus we + * make it inline to avoid a compiler warning. That's what gcc ends up + * doing anyway. + */ +static inline unsigned int i2c_adapter_depth(struct i2c_adapter *adapter) +{ + unsigned int depth = 0; + + while ((adapter = i2c_parent_is_i2c_adapter(adapter))) + depth++; + + return depth; +} + /* * Let users instantiate I2C devices through sysfs. This can be used when * platform initialization code doesn't contain the proper data for @@ -726,7 +742,8 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr, /* Make sure the device was added through sysfs */ res = -ENOENT; - mutex_lock(&adap->userspace_clients_lock); + mutex_lock_nested(&adap->userspace_clients_lock, + i2c_adapter_depth(adap)); list_for_each_entry_safe(client, next, &adap->userspace_clients, detected) { if (client->addr == addr) { @@ -1073,7 +1090,8 @@ int i2c_del_adapter(struct i2c_adapter *adap) return res; /* Remove devices instantiated from sysfs */ - mutex_lock(&adap->userspace_clients_lock); + mutex_lock_nested(&adap->userspace_clients_lock, + i2c_adapter_depth(adap)); list_for_each_entry_safe(client, next, &adap->userspace_clients, detected) { dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name, diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index 92406097efebcb5e0052fba38a0f59b5eb8c45eb..8d1e32d7cd9767db4e1c99db627681f03f233139 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -4,7 +4,7 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) { - ide_drive_t *drive = dev_get_drvdata(dev); + ide_drive_t *drive = to_ide_device(dev); ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; @@ -40,7 +40,7 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) int generic_ide_resume(struct device *dev) { - ide_drive_t *drive = dev_get_drvdata(dev); + ide_drive_t *drive = to_ide_device(dev); ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index f559088869f6451fc349a808778266b4f77557a9..e8726177d103082021a6549d4ce32d161e2bab2a 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -606,8 +606,9 @@ static int __init intel_idle_init(void) intel_idle_cpuidle_driver_init(); retval = cpuidle_register_driver(&intel_idle_driver); if (retval) { + struct cpuidle_driver *drv = cpuidle_get_driver(); printk(KERN_DEBUG PREFIX "intel_idle yielding to %s", - cpuidle_get_driver()->name); + drv ? drv->name : "none"); return retval; } diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index f61780a02374d1f855af861092c3ebae5b35cd80..3bd5540238a7e6d683fd903cfacc14c8b05b92d5 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -617,7 +617,7 @@ static int __devinit at91_adc_probe(struct platform_device *pdev) st->adc_clk = clk_get(&pdev->dev, "adc_op_clk"); if (IS_ERR(st->adc_clk)) { dev_err(&pdev->dev, "Failed to get the ADC clock.\n"); - ret = PTR_ERR(st->clk); + ret = PTR_ERR(st->adc_clk); goto error_disable_clk; } diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c index 59fbb3ae40e7f4628b3bc9d545a27c86e379bdbc..e35bb8f6fe7597e8823527772b119cd3b579377d 100644 --- a/drivers/iio/frequency/adf4350.c +++ b/drivers/iio/frequency/adf4350.c @@ -129,7 +129,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) { struct adf4350_platform_data *pdata = st->pdata; u64 tmp; - u32 div_gcd, prescaler; + u32 div_gcd, prescaler, chspc; u16 mdiv, r_cnt = 0; u8 band_sel_div; @@ -158,14 +158,20 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) if (pdata->ref_div_factor) r_cnt = pdata->ref_div_factor - 1; - do { - r_cnt = adf4350_tune_r_cnt(st, r_cnt); + chspc = st->chspc; - st->r1_mod = st->fpfd / st->chspc; - while (st->r1_mod > ADF4350_MAX_MODULUS) { - r_cnt = adf4350_tune_r_cnt(st, r_cnt); - st->r1_mod = st->fpfd / st->chspc; - } + do { + do { + do { + r_cnt = adf4350_tune_r_cnt(st, r_cnt); + st->r1_mod = st->fpfd / chspc; + if (r_cnt > ADF4350_MAX_R_CNT) { + /* try higher spacing values */ + chspc++; + r_cnt = 0; + } + } while ((st->r1_mod > ADF4350_MAX_MODULUS) && r_cnt); + } while (r_cnt == 0); tmp = freq * (u64)st->r1_mod + (st->fpfd > 1); do_div(tmp, st->fpfd); /* Div round closest (n + d/2)/d */ @@ -194,7 +200,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) st->regs[ADF4350_REG0] = ADF4350_REG0_INT(st->r0_int) | ADF4350_REG0_FRACT(st->r0_fract); - st->regs[ADF4350_REG1] = ADF4350_REG1_PHASE(0) | + st->regs[ADF4350_REG1] = ADF4350_REG1_PHASE(1) | ADF4350_REG1_MOD(st->r1_mod) | prescaler; diff --git a/drivers/iio/light/adjd_s311.c b/drivers/iio/light/adjd_s311.c index 1cbb449b319a8e9399af3b427342fb1702b1b173..9a99f43094f0824dde61203647462a8872faab83 100644 --- a/drivers/iio/light/adjd_s311.c +++ b/drivers/iio/light/adjd_s311.c @@ -271,9 +271,10 @@ static int adjd_s311_update_scan_mode(struct iio_dev *indio_dev, const unsigned long *scan_mask) { struct adjd_s311_data *data = iio_priv(indio_dev); - data->buffer = krealloc(data->buffer, indio_dev->scan_bytes, - GFP_KERNEL); - if (!data->buffer) + + kfree(data->buffer); + data->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); + if (data->buffer == NULL) return -ENOMEM; return 0; diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c index c3e7bac1312318470f29c805ca2ccdcfb6790402..e45712a921ce600cee7c10aa2d8a4dcbc46fccba 100644 --- a/drivers/iio/light/lm3533-als.c +++ b/drivers/iio/light/lm3533-als.c @@ -404,7 +404,7 @@ static int lm3533_als_get_hysteresis(struct iio_dev *indio_dev, unsigned nr, return ret; } -static int show_thresh_either_en(struct device *dev, +static ssize_t show_thresh_either_en(struct device *dev, struct device_attribute *attr, char *buf) { @@ -424,7 +424,7 @@ static int show_thresh_either_en(struct device *dev, return scnprintf(buf, PAGE_SIZE, "%u\n", enable); } -static int store_thresh_either_en(struct device *dev, +static ssize_t store_thresh_either_en(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 5a335b5447c668856da82fbdb98a49c0b28e89e1..7172559ce0c1486042a0d5396d8898a10cd31663 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -3064,10 +3064,7 @@ static int cma_join_ib_multicast(struct rdma_id_private *id_priv, id_priv->id.port_num, &rec, comp_mask, GFP_KERNEL, cma_ib_mc_handler, mc); - if (IS_ERR(mc->multicast.ib)) - return PTR_ERR(mc->multicast.ib); - - return 0; + return PTR_RET(mc->multicast.ib); } static void iboe_mcast_work_handler(struct work_struct *work) diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 893cb879462cfe584ea26c314b838bdcd3e3a41f..055ed59838dca128eef4986a9b3186a1f0588b84 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -267,6 +267,7 @@ static int ucma_event_handler(struct rdma_cm_id *cm_id, if (!uevent) return event->event == RDMA_CM_EVENT_CONNECT_REQUEST; + mutex_lock(&ctx->file->mut); uevent->cm_id = cm_id; ucma_set_event_context(ctx, event, uevent); uevent->resp.event = event->event; @@ -277,7 +278,6 @@ static int ucma_event_handler(struct rdma_cm_id *cm_id, ucma_copy_conn_event(&uevent->resp.param.conn, &event->param.conn); - mutex_lock(&ctx->file->mut); if (event->event == RDMA_CM_EVENT_CONNECT_REQUEST) { if (!ctx->backlog) { ret = -ENOMEM; @@ -1002,23 +1002,18 @@ static ssize_t ucma_set_option(struct ucma_file *file, const char __user *inbuf, if (IS_ERR(ctx)) return PTR_ERR(ctx); - optval = kmalloc(cmd.optlen, GFP_KERNEL); - if (!optval) { - ret = -ENOMEM; - goto out1; - } - - if (copy_from_user(optval, (void __user *) (unsigned long) cmd.optval, - cmd.optlen)) { - ret = -EFAULT; - goto out2; + optval = memdup_user((void __user *) (unsigned long) cmd.optval, + cmd.optlen); + if (IS_ERR(optval)) { + ret = PTR_ERR(optval); + goto out; } ret = ucma_set_option_level(ctx, cmd.level, cmd.optname, optval, cmd.optlen); -out2: kfree(optval); -out1: + +out: ucma_put_ctx(ctx); return ret; } diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c index 8c81992fa6db26275615d8f7f9e3998dd4223b7a..e4a73158fc7fc0392d9308146f2c695936b80532 100644 --- a/drivers/infiniband/hw/amso1100/c2_rnic.c +++ b/drivers/infiniband/hw/amso1100/c2_rnic.c @@ -439,7 +439,7 @@ static int c2_rnic_close(struct c2_dev *c2dev) /* * Called by c2_probe to initialize the RNIC. This principally - * involves initalizing the various limits and resouce pools that + * involves initializing the various limits and resource pools that * comprise the RNIC instance. */ int __devinit c2_rnic_init(struct c2_dev *c2dev) diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c index 77b6b182778ad642b23bb9dc6a8f943cf83a6a10..aaf88ef9409cddfabef4fb90c88347e27887d464 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -1680,7 +1680,7 @@ static int close_con_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) * T3A does 3 things when a TERM is received: * 1) send up a CPL_RDMA_TERMINATE message with the TERM packet * 2) generate an async event on the QP with the TERMINATE opcode - * 3) post a TERMINATE opcde cqe into the associated CQ. + * 3) post a TERMINATE opcode cqe into the associated CQ. * * For (1), we save the message in the qp for later consumer consumption. * For (2), we move the QP into TERMINATE, post a QP event and disconnect. diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 51f42061dae9de4d375795e89e5a95b28bbc0405..6cfd4d8fd0bd8e240dd1311698a2cf603fcfed15 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -1361,11 +1361,11 @@ static int abort_rpl(struct c4iw_dev *dev, struct sk_buff *skb) struct tid_info *t = dev->rdev.lldi.tids; ep = lookup_tid(t, tid); - PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid); if (!ep) { printk(KERN_WARNING MOD "Abort rpl to freed endpoint\n"); return 0; } + PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid); mutex_lock(&ep->com.mutex); switch (ep->com.state) { case ABORTING: diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index c27141fef1ab2f6dca170bb07aecd11ecaa3d48b..9c2ae7efd00f4c03db74d67a4b5e8d84b0a87e28 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -125,6 +125,7 @@ static void update_sm_ah(struct mlx4_ib_dev *dev, u8 port_num, u16 lid, u8 sl) { struct ib_ah *new_ah; struct ib_ah_attr ah_attr; + unsigned long flags; if (!dev->send_agent[port_num - 1][0]) return; @@ -139,11 +140,11 @@ static void update_sm_ah(struct mlx4_ib_dev *dev, u8 port_num, u16 lid, u8 sl) if (IS_ERR(new_ah)) return; - spin_lock(&dev->sm_lock); + spin_lock_irqsave(&dev->sm_lock, flags); if (dev->sm_ah[port_num - 1]) ib_destroy_ah(dev->sm_ah[port_num - 1]); dev->sm_ah[port_num - 1] = new_ah; - spin_unlock(&dev->sm_lock); + spin_unlock_irqrestore(&dev->sm_lock, flags); } /* @@ -197,13 +198,15 @@ static void smp_snoop(struct ib_device *ibdev, u8 port_num, struct ib_mad *mad, static void node_desc_override(struct ib_device *dev, struct ib_mad *mad) { + unsigned long flags; + if ((mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_LID_ROUTED || mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) && mad->mad_hdr.method == IB_MGMT_METHOD_GET_RESP && mad->mad_hdr.attr_id == IB_SMP_ATTR_NODE_DESC) { - spin_lock(&to_mdev(dev)->sm_lock); + spin_lock_irqsave(&to_mdev(dev)->sm_lock, flags); memcpy(((struct ib_smp *) mad)->data, dev->node_desc, 64); - spin_unlock(&to_mdev(dev)->sm_lock); + spin_unlock_irqrestore(&to_mdev(dev)->sm_lock, flags); } } @@ -213,6 +216,7 @@ static void forward_trap(struct mlx4_ib_dev *dev, u8 port_num, struct ib_mad *ma struct ib_mad_send_buf *send_buf; struct ib_mad_agent *agent = dev->send_agent[port_num - 1][qpn]; int ret; + unsigned long flags; if (agent) { send_buf = ib_create_send_mad(agent, qpn, 0, 0, IB_MGMT_MAD_HDR, @@ -225,13 +229,13 @@ static void forward_trap(struct mlx4_ib_dev *dev, u8 port_num, struct ib_mad *ma * wrong following the IB spec strictly, but we know * it's OK for our devices). */ - spin_lock(&dev->sm_lock); + spin_lock_irqsave(&dev->sm_lock, flags); memcpy(send_buf->mad, mad, sizeof *mad); if ((send_buf->ah = dev->sm_ah[port_num - 1])) ret = ib_post_send_mad(send_buf, NULL); else ret = -EINVAL; - spin_unlock(&dev->sm_lock); + spin_unlock_irqrestore(&dev->sm_lock, flags); if (ret) ib_free_send_mad(send_buf); diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index fe2088cfa6eef699f0222b710aeb3de930c1c139..cc05579ebce7fd6b5f5fc9c86b2a1452db0101a7 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -423,6 +423,7 @@ static int mlx4_ib_modify_device(struct ib_device *ibdev, int mask, struct ib_device_modify *props) { struct mlx4_cmd_mailbox *mailbox; + unsigned long flags; if (mask & ~IB_DEVICE_MODIFY_NODE_DESC) return -EOPNOTSUPP; @@ -430,9 +431,9 @@ static int mlx4_ib_modify_device(struct ib_device *ibdev, int mask, if (!(mask & IB_DEVICE_MODIFY_NODE_DESC)) return 0; - spin_lock(&to_mdev(ibdev)->sm_lock); + spin_lock_irqsave(&to_mdev(ibdev)->sm_lock, flags); memcpy(ibdev->node_desc, props->node_desc, 64); - spin_unlock(&to_mdev(ibdev)->sm_lock); + spin_unlock_irqrestore(&to_mdev(ibdev)->sm_lock, flags); /* * If possible, pass node desc to FW, so it can generate diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index a6d8ea060ea896ad4f7c7d9a8639a8be8f67fb4e..f585eddef4b7d5c7921575cebaa508eefde4f934 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1407,6 +1407,7 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_send_wr *wr, struct mlx4_wqe_mlx_seg *mlx = wqe; struct mlx4_wqe_inline_seg *inl = wqe + sizeof *mlx; struct mlx4_ib_ah *ah = to_mah(wr->wr.ud.ah); + struct net_device *ndev; union ib_gid sgid; u16 pkey; int send_size; @@ -1483,7 +1484,10 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_send_wr *wr, memcpy(sqp->ud_header.eth.dmac_h, ah->av.eth.mac, 6); /* FIXME: cache smac value? */ - smac = to_mdev(sqp->qp.ibqp.device)->iboe.netdevs[sqp->qp.port - 1]->dev_addr; + ndev = to_mdev(sqp->qp.ibqp.device)->iboe.netdevs[sqp->qp.port - 1]; + if (!ndev) + return -ENODEV; + smac = ndev->dev_addr; memcpy(sqp->ud_header.eth.smac_h, smac, 6); if (!memcmp(sqp->ud_header.eth.smac_h, sqp->ud_header.eth.dmac_h, 6)) mlx->flags |= cpu_to_be32(MLX4_WQE_CTRL_FORCE_LOOPBACK); diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_main.c b/drivers/infiniband/hw/ocrdma/ocrdma_main.c index 5a044526e4f4c379bf52e05f9b15c00953453df7..c4e0131f1b578fec8fa62d029ff380b3d976b13b 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_main.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_main.c @@ -161,7 +161,7 @@ static void ocrdma_add_default_sgid(struct ocrdma_dev *dev) ocrdma_get_guid(dev, &sgid->raw[8]); } -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#if IS_ENABLED(CONFIG_VLAN_8021Q) static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev) { struct net_device *netdev, *tmp; @@ -202,14 +202,13 @@ static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev) return 0; } -#if IS_ENABLED(CONFIG_IPV6) || IS_ENABLED(CONFIG_VLAN_8021Q) +#if IS_ENABLED(CONFIG_IPV6) static int ocrdma_inet6addr_event(struct notifier_block *notifier, unsigned long event, void *ptr) { struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)ptr; - struct net_device *event_netdev = ifa->idev->dev; - struct net_device *netdev = NULL; + struct net_device *netdev = ifa->idev->dev; struct ib_event gid_event; struct ocrdma_dev *dev; bool found = false; @@ -217,11 +216,12 @@ static int ocrdma_inet6addr_event(struct notifier_block *notifier, bool is_vlan = false; u16 vid = 0; - netdev = vlan_dev_real_dev(event_netdev); - if (netdev != event_netdev) { - is_vlan = true; - vid = vlan_dev_vlan_id(event_netdev); + is_vlan = netdev->priv_flags & IFF_802_1Q_VLAN; + if (is_vlan) { + vid = vlan_dev_vlan_id(netdev); + netdev = vlan_dev_real_dev(netdev); } + rcu_read_lock(); list_for_each_entry_rcu(dev, &ocrdma_dev_list, entry) { if (dev->nic_info.netdev == netdev) { diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index b2f9784beb4ad88a34243388563b230182f16db8..b29a4246ef41ef6068372398ed23134cceae3384 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -893,7 +893,9 @@ static int ocrdma_check_qp_params(struct ib_pd *ibpd, struct ocrdma_dev *dev, /* verify consumer QPs are not trying to use GSI QP's CQ */ if ((attrs->qp_type != IB_QPT_GSI) && (dev->gsi_qp_created)) { if ((dev->gsi_sqcq == get_ocrdma_cq(attrs->send_cq)) || - (dev->gsi_sqcq == get_ocrdma_cq(attrs->send_cq))) { + (dev->gsi_sqcq == get_ocrdma_cq(attrs->recv_cq)) || + (dev->gsi_rqcq == get_ocrdma_cq(attrs->send_cq)) || + (dev->gsi_rqcq == get_ocrdma_cq(attrs->recv_cq))) { ocrdma_err("%s(%d) Consumer QP cannot use GSI CQs.\n", __func__, dev->id); return -EINVAL; @@ -2217,7 +2219,6 @@ static bool ocrdma_poll_success_scqe(struct ocrdma_qp *qp, u32 wqe_idx; if (!qp->wqe_wr_id_tbl[tail].signaled) { - expand = true; /* CQE cannot be consumed yet */ *polled = false; /* WC cannot be consumed yet */ } else { ibwc->status = IB_WC_SUCCESS; @@ -2225,10 +2226,11 @@ static bool ocrdma_poll_success_scqe(struct ocrdma_qp *qp, ibwc->qp = &qp->ibqp; ocrdma_update_wc(qp, ibwc, tail); *polled = true; - wqe_idx = le32_to_cpu(cqe->wq.wqeidx) & OCRDMA_CQE_WQEIDX_MASK; - if (tail != wqe_idx) - expand = true; /* Coalesced CQE can't be consumed yet */ } + wqe_idx = le32_to_cpu(cqe->wq.wqeidx) & OCRDMA_CQE_WQEIDX_MASK; + if (tail != wqe_idx) + expand = true; /* Coalesced CQE can't be consumed yet */ + ocrdma_hwq_inc_tail(&qp->sq); return expand; } diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h index 6e19ec844d9982122014df601ed64a975056502e..7b1b86690024d5e7a19b8c332c0270e74ae55f83 100644 --- a/drivers/infiniband/hw/qib/qib.h +++ b/drivers/infiniband/hw/qib/qib.h @@ -656,6 +656,11 @@ struct qib_pportdata { /* 16 congestion entries with each entry corresponding to a SL */ struct ib_cc_congestion_entry_shadow *congestion_entries; + /* Maximum number of congestion control entries that the agent expects + * the manager to send. + */ + u16 cc_supported_table_entries; + /* Total number of congestion control table entries */ u16 total_cct_entry; @@ -667,11 +672,6 @@ struct qib_pportdata { /* CA's max number of 64 entry units in the congestion control table */ u8 cc_max_table_entries; - - /* Maximum number of congestion control entries that the agent expects - * the manager to send. - */ - u8 cc_supported_table_entries; }; /* Observers. Not to be taken lightly, possibly not to ship. */ diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 0d7280af99bc81084d1977d5bfe8480450c85c77..3f6b21e9dc110513c0522b099adcfa0f131ef6b4 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -6346,8 +6346,10 @@ static int qib_init_7322_variables(struct qib_devdata *dd) dd->piobcnt4k * dd->align4k; dd->piovl15base = ioremap_nocache(vl15off, NUM_VL15_BUFS * dd->align4k); - if (!dd->piovl15base) + if (!dd->piovl15base) { + ret = -ENOMEM; goto bail; + } } qib_7322_set_baseaddrs(dd); /* set chip access pointers now */ diff --git a/drivers/infiniband/hw/qib/qib_mad.c b/drivers/infiniband/hw/qib/qib_mad.c index 19f1e6c45fb6847caaac2a45af4e69d4df981ca4..ccb119143d20568eb0570ab5b1360a78ca888e08 100644 --- a/drivers/infiniband/hw/qib/qib_mad.c +++ b/drivers/infiniband/hw/qib/qib_mad.c @@ -471,9 +471,10 @@ static int subn_get_portinfo(struct ib_smp *smp, struct ib_device *ibdev, if (port_num != port) { ibp = to_iport(ibdev, port_num); ret = check_mkey(ibp, smp, 0); - if (ret) + if (ret) { ret = IB_MAD_RESULT_FAILURE; goto bail; + } } } diff --git a/drivers/infiniband/hw/qib/qib_sd7220.c b/drivers/infiniband/hw/qib/qib_sd7220.c index a322d5171a2c793d0ec3cb5e08632a0264fd2ab5..50a8a0d4fe676f5467c677d66a4985170900059d 100644 --- a/drivers/infiniband/hw/qib/qib_sd7220.c +++ b/drivers/infiniband/hw/qib/qib_sd7220.c @@ -372,7 +372,7 @@ static void qib_sd_trimdone_monitor(struct qib_devdata *dd, /* Read CTRL reg for each channel to check TRIMDONE */ if (baduns & (1 << chn)) { qib_dev_err(dd, - "Reseting TRIMDONE on chn %d (%s)\n", + "Resetting TRIMDONE on chn %d (%s)\n", chn, where); ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, IB_CTRL2(chn), 0x10, 0x10); diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 86df632ea6121f94382071de8e0a17258a361a7c..0af216d21f8790c31af507022bbc722627f41671 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -92,6 +92,8 @@ enum { IPOIB_STOP_REAPER = 7, IPOIB_FLAG_ADMIN_CM = 9, IPOIB_FLAG_UMCAST = 10, + IPOIB_STOP_NEIGH_GC = 11, + IPOIB_NEIGH_TBL_FLUSH = 12, IPOIB_MAX_BACKOFF_SECONDS = 16, @@ -260,6 +262,23 @@ struct ipoib_ethtool_st { u16 max_coalesced_frames; }; +struct ipoib_neigh_table; + +struct ipoib_neigh_hash { + struct ipoib_neigh_table *ntbl; + struct ipoib_neigh __rcu **buckets; + struct rcu_head rcu; + u32 mask; + u32 size; +}; + +struct ipoib_neigh_table { + struct ipoib_neigh_hash __rcu *htbl; + atomic_t entries; + struct completion flushed; + struct completion deleted; +}; + /* * Device private locking: network stack tx_lock protects members used * in TX fast path, lock protects everything else. lock nests inside @@ -279,6 +298,8 @@ struct ipoib_dev_priv { struct rb_root path_tree; struct list_head path_list; + struct ipoib_neigh_table ntbl; + struct ipoib_mcast *broadcast; struct list_head multicast_list; struct rb_root multicast_tree; @@ -291,7 +312,7 @@ struct ipoib_dev_priv { struct work_struct flush_heavy; struct work_struct restart_task; struct delayed_work ah_reap_task; - + struct delayed_work neigh_reap_task; struct ib_device *ca; u8 port; u16 pkey; @@ -377,13 +398,16 @@ struct ipoib_neigh { #ifdef CONFIG_INFINIBAND_IPOIB_CM struct ipoib_cm_tx *cm; #endif - union ib_gid dgid; + u8 daddr[INFINIBAND_ALEN]; struct sk_buff_head queue; - struct neighbour *neighbour; struct net_device *dev; struct list_head list; + struct ipoib_neigh __rcu *hnext; + struct rcu_head rcu; + atomic_t refcnt; + unsigned long alive; }; #define IPOIB_UD_MTU(ib_mtu) (ib_mtu - IPOIB_ENCAP_LEN) @@ -394,21 +418,17 @@ static inline int ipoib_ud_need_sg(unsigned int ib_mtu) return IPOIB_UD_BUF_SIZE(ib_mtu) > PAGE_SIZE; } -/* - * We stash a pointer to our private neighbour information after our - * hardware address in neigh->ha. The ALIGN() expression here makes - * sure that this pointer is stored aligned so that an unaligned - * load is not needed to dereference it. - */ -static inline struct ipoib_neigh **to_ipoib_neigh(struct neighbour *neigh) +void ipoib_neigh_dtor(struct ipoib_neigh *neigh); +static inline void ipoib_neigh_put(struct ipoib_neigh *neigh) { - return (void*) neigh + ALIGN(offsetof(struct neighbour, ha) + - INFINIBAND_ALEN, sizeof(void *)); + if (atomic_dec_and_test(&neigh->refcnt)) + ipoib_neigh_dtor(neigh); } - -struct ipoib_neigh *ipoib_neigh_alloc(struct neighbour *neigh, +struct ipoib_neigh *ipoib_neigh_get(struct net_device *dev, u8 *daddr); +struct ipoib_neigh *ipoib_neigh_alloc(u8 *daddr, struct net_device *dev); -void ipoib_neigh_free(struct net_device *dev, struct ipoib_neigh *neigh); +void ipoib_neigh_free(struct ipoib_neigh *neigh); +void ipoib_del_neighs_by_gid(struct net_device *dev, u8 *gid); extern struct workqueue_struct *ipoib_workqueue; @@ -425,7 +445,6 @@ static inline void ipoib_put_ah(struct ipoib_ah *ah) { kref_put(&ah->ref, ipoib_free_ah); } - int ipoib_open(struct net_device *dev); int ipoib_add_pkey_attr(struct net_device *dev); int ipoib_add_umcast_attr(struct net_device *dev); @@ -455,7 +474,7 @@ void ipoib_dev_cleanup(struct net_device *dev); void ipoib_mcast_join_task(struct work_struct *work); void ipoib_mcast_carrier_on_task(struct work_struct *work); -void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb); +void ipoib_mcast_send(struct net_device *dev, u8 *daddr, struct sk_buff *skb); void ipoib_mcast_restart_task(struct work_struct *work); int ipoib_mcast_start_thread(struct net_device *dev); @@ -517,10 +536,10 @@ static inline int ipoib_cm_admin_enabled(struct net_device *dev) test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); } -static inline int ipoib_cm_enabled(struct net_device *dev, struct neighbour *n) +static inline int ipoib_cm_enabled(struct net_device *dev, u8 *hwaddr) { struct ipoib_dev_priv *priv = netdev_priv(dev); - return IPOIB_CM_SUPPORTED(n->ha) && + return IPOIB_CM_SUPPORTED(hwaddr) && test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); } @@ -575,7 +594,7 @@ static inline int ipoib_cm_admin_enabled(struct net_device *dev) { return 0; } -static inline int ipoib_cm_enabled(struct net_device *dev, struct neighbour *n) +static inline int ipoib_cm_enabled(struct net_device *dev, u8 *hwaddr) { return 0; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 6d66ab0dd92a7ea0032d0e43a69ea38cceb21041..24683fda8e21cdbaca2973cc69454013a2bbb995 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -811,9 +811,7 @@ void ipoib_cm_handle_tx_wc(struct net_device *dev, struct ib_wc *wc) if (neigh) { neigh->cm = NULL; list_del(&neigh->list); - if (neigh->ah) - ipoib_put_ah(neigh->ah); - ipoib_neigh_free(dev, neigh); + ipoib_neigh_free(neigh); tx->neigh = NULL; } @@ -1230,9 +1228,7 @@ static int ipoib_cm_tx_handler(struct ib_cm_id *cm_id, if (neigh) { neigh->cm = NULL; list_del(&neigh->list); - if (neigh->ah) - ipoib_put_ah(neigh->ah); - ipoib_neigh_free(dev, neigh); + ipoib_neigh_free(neigh); tx->neigh = NULL; } @@ -1275,12 +1271,15 @@ struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path void ipoib_cm_destroy_tx(struct ipoib_cm_tx *tx) { struct ipoib_dev_priv *priv = netdev_priv(tx->dev); + unsigned long flags; if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &tx->flags)) { + spin_lock_irqsave(&priv->lock, flags); list_move(&tx->list, &priv->cm.reap_list); queue_work(ipoib_workqueue, &priv->cm.reap_task); ipoib_dbg(priv, "Reap connection for gid %pI6\n", - tx->neigh->dgid.raw); + tx->neigh->daddr + 4); tx->neigh = NULL; + spin_unlock_irqrestore(&priv->lock, flags); } } @@ -1304,7 +1303,7 @@ static void ipoib_cm_tx_start(struct work_struct *work) p = list_entry(priv->cm.start_list.next, typeof(*p), list); list_del_init(&p->list); neigh = p->neigh; - qpn = IPOIB_QPN(neigh->neighbour->ha); + qpn = IPOIB_QPN(neigh->daddr); memcpy(&pathrec, &p->path->pathrec, sizeof pathrec); spin_unlock_irqrestore(&priv->lock, flags); @@ -1320,9 +1319,7 @@ static void ipoib_cm_tx_start(struct work_struct *work) if (neigh) { neigh->cm = NULL; list_del(&neigh->list); - if (neigh->ah) - ipoib_put_ah(neigh->ah); - ipoib_neigh_free(dev, neigh); + ipoib_neigh_free(neigh); } list_del(&p->list); kfree(p); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index bbee4b2d7a13b46b847a56f8f1538de8fe5ec9be..1e19b5ae7c479a5865837ffa4b08f7f5c89bdcdc 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -46,7 +46,8 @@ #include #include -#include +#include +#include MODULE_AUTHOR("Roland Dreier"); MODULE_DESCRIPTION("IP-over-InfiniBand net driver"); @@ -84,6 +85,7 @@ struct ib_sa_client ipoib_sa_client; static void ipoib_add_one(struct ib_device *device); static void ipoib_remove_one(struct ib_device *device); +static void ipoib_neigh_reclaim(struct rcu_head *rp); static struct ib_client ipoib_client = { .name = "ipoib", @@ -264,30 +266,15 @@ static int __path_add(struct net_device *dev, struct ipoib_path *path) static void path_free(struct net_device *dev, struct ipoib_path *path) { - struct ipoib_dev_priv *priv = netdev_priv(dev); - struct ipoib_neigh *neigh, *tn; struct sk_buff *skb; - unsigned long flags; while ((skb = __skb_dequeue(&path->queue))) dev_kfree_skb_irq(skb); - spin_lock_irqsave(&priv->lock, flags); - - list_for_each_entry_safe(neigh, tn, &path->neigh_list, list) { - /* - * It's safe to call ipoib_put_ah() inside priv->lock - * here, because we know that path->ah will always - * hold one more reference, so ipoib_put_ah() will - * never do more than decrement the ref count. - */ - if (neigh->ah) - ipoib_put_ah(neigh->ah); - - ipoib_neigh_free(dev, neigh); - } + ipoib_dbg(netdev_priv(dev), "path_free\n"); - spin_unlock_irqrestore(&priv->lock, flags); + /* remove all neigh connected to this path */ + ipoib_del_neighs_by_gid(dev, path->pathrec.dgid.raw); if (path->ah) ipoib_put_ah(path->ah); @@ -458,19 +445,15 @@ static void path_rec_completion(int status, } kref_get(&path->ah->ref); neigh->ah = path->ah; - memcpy(&neigh->dgid.raw, &path->pathrec.dgid.raw, - sizeof(union ib_gid)); - if (ipoib_cm_enabled(dev, neigh->neighbour)) { + if (ipoib_cm_enabled(dev, neigh->daddr)) { if (!ipoib_cm_get(neigh)) ipoib_cm_set(neigh, ipoib_cm_create_tx(dev, path, neigh)); if (!ipoib_cm_get(neigh)) { list_del(&neigh->list); - if (neigh->ah) - ipoib_put_ah(neigh->ah); - ipoib_neigh_free(dev, neigh); + ipoib_neigh_free(neigh); continue; } } @@ -555,26 +538,26 @@ static int path_rec_start(struct net_device *dev, return 0; } -/* called with rcu_read_lock */ -static void neigh_add_path(struct sk_buff *skb, struct neighbour *n, struct net_device *dev) +static void neigh_add_path(struct sk_buff *skb, u8 *daddr, + struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ipoib_path *path; struct ipoib_neigh *neigh; unsigned long flags; - neigh = ipoib_neigh_alloc(n, skb->dev); + spin_lock_irqsave(&priv->lock, flags); + neigh = ipoib_neigh_alloc(daddr, dev); if (!neigh) { + spin_unlock_irqrestore(&priv->lock, flags); ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); return; } - spin_lock_irqsave(&priv->lock, flags); - - path = __path_find(dev, n->ha + 4); + path = __path_find(dev, daddr + 4); if (!path) { - path = path_rec_create(dev, n->ha + 4); + path = path_rec_create(dev, daddr + 4); if (!path) goto err_path; @@ -586,17 +569,13 @@ static void neigh_add_path(struct sk_buff *skb, struct neighbour *n, struct net_ if (path->ah) { kref_get(&path->ah->ref); neigh->ah = path->ah; - memcpy(&neigh->dgid.raw, &path->pathrec.dgid.raw, - sizeof(union ib_gid)); - if (ipoib_cm_enabled(dev, neigh->neighbour)) { + if (ipoib_cm_enabled(dev, neigh->daddr)) { if (!ipoib_cm_get(neigh)) ipoib_cm_set(neigh, ipoib_cm_create_tx(dev, path, neigh)); if (!ipoib_cm_get(neigh)) { list_del(&neigh->list); - if (neigh->ah) - ipoib_put_ah(neigh->ah); - ipoib_neigh_free(dev, neigh); + ipoib_neigh_free(neigh); goto err_drop; } if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) @@ -608,7 +587,8 @@ static void neigh_add_path(struct sk_buff *skb, struct neighbour *n, struct net_ } } else { spin_unlock_irqrestore(&priv->lock, flags); - ipoib_send(dev, skb, path->ah, IPOIB_QPN(n->ha)); + ipoib_send(dev, skb, path->ah, IPOIB_QPN(daddr)); + ipoib_neigh_put(neigh); return; } } else { @@ -621,35 +601,20 @@ static void neigh_add_path(struct sk_buff *skb, struct neighbour *n, struct net_ } spin_unlock_irqrestore(&priv->lock, flags); + ipoib_neigh_put(neigh); return; err_list: list_del(&neigh->list); err_path: - ipoib_neigh_free(dev, neigh); + ipoib_neigh_free(neigh); err_drop: ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); spin_unlock_irqrestore(&priv->lock, flags); -} - -/* called with rcu_read_lock */ -static void ipoib_path_lookup(struct sk_buff *skb, struct neighbour *n, struct net_device *dev) -{ - struct ipoib_dev_priv *priv = netdev_priv(skb->dev); - - /* Look up path record for unicasts */ - if (n->ha[4] != 0xff) { - neigh_add_path(skb, n, dev); - return; - } - - /* Add in the P_Key for multicasts */ - n->ha[8] = (priv->pkey >> 8) & 0xff; - n->ha[9] = priv->pkey & 0xff; - ipoib_mcast_send(dev, n->ha + 4, skb); + ipoib_neigh_put(neigh); } static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, @@ -710,96 +675,80 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ipoib_neigh *neigh; - struct neighbour *n = NULL; + struct ipoib_cb *cb = (struct ipoib_cb *) skb->cb; + struct ipoib_header *header; unsigned long flags; - rcu_read_lock(); - if (likely(skb_dst(skb))) { - n = dst_neigh_lookup_skb(skb_dst(skb), skb); - if (!n) { + header = (struct ipoib_header *) skb->data; + + if (unlikely(cb->hwaddr[4] == 0xff)) { + /* multicast, arrange "if" according to probability */ + if ((header->proto != htons(ETH_P_IP)) && + (header->proto != htons(ETH_P_IPV6)) && + (header->proto != htons(ETH_P_ARP)) && + (header->proto != htons(ETH_P_RARP))) { + /* ethertype not supported by IPoIB */ ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); - goto unlock; + return NETDEV_TX_OK; } + /* Add in the P_Key for multicast*/ + cb->hwaddr[8] = (priv->pkey >> 8) & 0xff; + cb->hwaddr[9] = priv->pkey & 0xff; + + neigh = ipoib_neigh_get(dev, cb->hwaddr); + if (likely(neigh)) + goto send_using_neigh; + ipoib_mcast_send(dev, cb->hwaddr, skb); + return NETDEV_TX_OK; } - if (likely(n)) { - if (unlikely(!*to_ipoib_neigh(n))) { - ipoib_path_lookup(skb, n, dev); - goto unlock; - } - neigh = *to_ipoib_neigh(n); - - if (unlikely((memcmp(&neigh->dgid.raw, - n->ha + 4, - sizeof(union ib_gid))) || - (neigh->dev != dev))) { - spin_lock_irqsave(&priv->lock, flags); - /* - * It's safe to call ipoib_put_ah() inside - * priv->lock here, because we know that - * path->ah will always hold one more reference, - * so ipoib_put_ah() will never do more than - * decrement the ref count. - */ - if (neigh->ah) - ipoib_put_ah(neigh->ah); - list_del(&neigh->list); - ipoib_neigh_free(dev, neigh); - spin_unlock_irqrestore(&priv->lock, flags); - ipoib_path_lookup(skb, n, dev); - goto unlock; + /* unicast, arrange "switch" according to probability */ + switch (header->proto) { + case htons(ETH_P_IP): + case htons(ETH_P_IPV6): + neigh = ipoib_neigh_get(dev, cb->hwaddr); + if (unlikely(!neigh)) { + neigh_add_path(skb, cb->hwaddr, dev); + return NETDEV_TX_OK; } + break; + case htons(ETH_P_ARP): + case htons(ETH_P_RARP): + /* for unicast ARP and RARP should always perform path find */ + unicast_arp_send(skb, dev, cb); + return NETDEV_TX_OK; + default: + /* ethertype not supported by IPoIB */ + ++dev->stats.tx_dropped; + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } - if (ipoib_cm_get(neigh)) { - if (ipoib_cm_up(neigh)) { - ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); - goto unlock; - } - } else if (neigh->ah) { - ipoib_send(dev, skb, neigh->ah, IPOIB_QPN(n->ha)); - goto unlock; +send_using_neigh: + /* note we now hold a ref to neigh */ + if (ipoib_cm_get(neigh)) { + if (ipoib_cm_up(neigh)) { + ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); + goto unref; } + } else if (neigh->ah) { + ipoib_send(dev, skb, neigh->ah, IPOIB_QPN(cb->hwaddr)); + goto unref; + } - if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) { - spin_lock_irqsave(&priv->lock, flags); - __skb_queue_tail(&neigh->queue, skb); - spin_unlock_irqrestore(&priv->lock, flags); - } else { - ++dev->stats.tx_dropped; - dev_kfree_skb_any(skb); - } + if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) { + spin_lock_irqsave(&priv->lock, flags); + __skb_queue_tail(&neigh->queue, skb); + spin_unlock_irqrestore(&priv->lock, flags); } else { - struct ipoib_cb *cb = (struct ipoib_cb *) skb->cb; - - if (cb->hwaddr[4] == 0xff) { - /* Add in the P_Key for multicast*/ - cb->hwaddr[8] = (priv->pkey >> 8) & 0xff; - cb->hwaddr[9] = priv->pkey & 0xff; + ++dev->stats.tx_dropped; + dev_kfree_skb_any(skb); + } - ipoib_mcast_send(dev, cb->hwaddr + 4, skb); - } else { - /* unicast GID -- should be ARP or RARP reply */ - - if ((be16_to_cpup((__be16 *) skb->data) != ETH_P_ARP) && - (be16_to_cpup((__be16 *) skb->data) != ETH_P_RARP)) { - ipoib_warn(priv, "Unicast, no %s: type %04x, QPN %06x %pI6\n", - skb_dst(skb) ? "neigh" : "dst", - be16_to_cpup((__be16 *) skb->data), - IPOIB_QPN(cb->hwaddr), - cb->hwaddr + 4); - dev_kfree_skb_any(skb); - ++dev->stats.tx_dropped; - goto unlock; - } +unref: + ipoib_neigh_put(neigh); - unicast_arp_send(skb, dev, cb); - } - } -unlock: - if (n) - neigh_release(n); - rcu_read_unlock(); return NETDEV_TX_OK; } @@ -821,6 +770,7 @@ static int ipoib_hard_header(struct sk_buff *skb, const void *daddr, const void *saddr, unsigned len) { struct ipoib_header *header; + struct ipoib_cb *cb = (struct ipoib_cb *) skb->cb; header = (struct ipoib_header *) skb_push(skb, sizeof *header); @@ -828,14 +778,11 @@ static int ipoib_hard_header(struct sk_buff *skb, header->reserved = 0; /* - * If we don't have a dst_entry structure, stuff the + * we don't rely on dst_entry structure, always stuff the * destination address into skb->cb so we can figure out where * to send the packet later. */ - if (!skb_dst(skb)) { - struct ipoib_cb *cb = (struct ipoib_cb *) skb->cb; - memcpy(cb->hwaddr, daddr, INFINIBAND_ALEN); - } + memcpy(cb->hwaddr, daddr, INFINIBAND_ALEN); return 0; } @@ -852,86 +799,433 @@ static void ipoib_set_mcast_list(struct net_device *dev) queue_work(ipoib_workqueue, &priv->restart_task); } -static void ipoib_neigh_cleanup(struct neighbour *n) +static u32 ipoib_addr_hash(struct ipoib_neigh_hash *htbl, u8 *daddr) { - struct ipoib_neigh *neigh; - struct ipoib_dev_priv *priv = netdev_priv(n->dev); + /* + * Use only the address parts that contributes to spreading + * The subnet prefix is not used as one can not connect to + * same remote port (GUID) using the same remote QPN via two + * different subnets. + */ + /* qpn octets[1:4) & port GUID octets[12:20) */ + u32 *daddr_32 = (u32 *) daddr; + u32 hv; + + hv = jhash_3words(daddr_32[3], daddr_32[4], 0xFFFFFF & daddr_32[0], 0); + return hv & htbl->mask; +} + +struct ipoib_neigh *ipoib_neigh_get(struct net_device *dev, u8 *daddr) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_neigh_table *ntbl = &priv->ntbl; + struct ipoib_neigh_hash *htbl; + struct ipoib_neigh *neigh = NULL; + u32 hash_val; + + rcu_read_lock_bh(); + + htbl = rcu_dereference_bh(ntbl->htbl); + + if (!htbl) + goto out_unlock; + + hash_val = ipoib_addr_hash(htbl, daddr); + for (neigh = rcu_dereference_bh(htbl->buckets[hash_val]); + neigh != NULL; + neigh = rcu_dereference_bh(neigh->hnext)) { + if (memcmp(daddr, neigh->daddr, INFINIBAND_ALEN) == 0) { + /* found, take one ref on behalf of the caller */ + if (!atomic_inc_not_zero(&neigh->refcnt)) { + /* deleted */ + neigh = NULL; + goto out_unlock; + } + neigh->alive = jiffies; + goto out_unlock; + } + } + +out_unlock: + rcu_read_unlock_bh(); + return neigh; +} + +static void __ipoib_reap_neigh(struct ipoib_dev_priv *priv) +{ + struct ipoib_neigh_table *ntbl = &priv->ntbl; + struct ipoib_neigh_hash *htbl; + unsigned long neigh_obsolete; + unsigned long dt; unsigned long flags; - struct ipoib_ah *ah = NULL; + int i; - neigh = *to_ipoib_neigh(n); - if (neigh) - priv = netdev_priv(neigh->dev); - else + if (test_bit(IPOIB_STOP_NEIGH_GC, &priv->flags)) return; - ipoib_dbg(priv, - "neigh_cleanup for %06x %pI6\n", - IPOIB_QPN(n->ha), - n->ha + 4); spin_lock_irqsave(&priv->lock, flags); - if (neigh->ah) - ah = neigh->ah; - list_del(&neigh->list); - ipoib_neigh_free(n->dev, neigh); + htbl = rcu_dereference_protected(ntbl->htbl, + lockdep_is_held(&priv->lock)); + + if (!htbl) + goto out_unlock; + + /* neigh is obsolete if it was idle for two GC periods */ + dt = 2 * arp_tbl.gc_interval; + neigh_obsolete = jiffies - dt; + /* handle possible race condition */ + if (test_bit(IPOIB_STOP_NEIGH_GC, &priv->flags)) + goto out_unlock; + + for (i = 0; i < htbl->size; i++) { + struct ipoib_neigh *neigh; + struct ipoib_neigh __rcu **np = &htbl->buckets[i]; + + while ((neigh = rcu_dereference_protected(*np, + lockdep_is_held(&priv->lock))) != NULL) { + /* was the neigh idle for two GC periods */ + if (time_after(neigh_obsolete, neigh->alive)) { + rcu_assign_pointer(*np, + rcu_dereference_protected(neigh->hnext, + lockdep_is_held(&priv->lock))); + /* remove from path/mc list */ + list_del(&neigh->list); + call_rcu(&neigh->rcu, ipoib_neigh_reclaim); + } else { + np = &neigh->hnext; + } + } + } + +out_unlock: spin_unlock_irqrestore(&priv->lock, flags); +} + +static void ipoib_reap_neigh(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = + container_of(work, struct ipoib_dev_priv, neigh_reap_task.work); + + __ipoib_reap_neigh(priv); - if (ah) - ipoib_put_ah(ah); + if (!test_bit(IPOIB_STOP_NEIGH_GC, &priv->flags)) + queue_delayed_work(ipoib_workqueue, &priv->neigh_reap_task, + arp_tbl.gc_interval); } -struct ipoib_neigh *ipoib_neigh_alloc(struct neighbour *neighbour, + +static struct ipoib_neigh *ipoib_neigh_ctor(u8 *daddr, struct net_device *dev) { struct ipoib_neigh *neigh; - neigh = kmalloc(sizeof *neigh, GFP_ATOMIC); + neigh = kzalloc(sizeof *neigh, GFP_ATOMIC); if (!neigh) return NULL; - neigh->neighbour = neighbour; neigh->dev = dev; - memset(&neigh->dgid.raw, 0, sizeof (union ib_gid)); - *to_ipoib_neigh(neighbour) = neigh; + memcpy(&neigh->daddr, daddr, sizeof(neigh->daddr)); skb_queue_head_init(&neigh->queue); + INIT_LIST_HEAD(&neigh->list); ipoib_cm_set(neigh, NULL); + /* one ref on behalf of the caller */ + atomic_set(&neigh->refcnt, 1); + + return neigh; +} + +struct ipoib_neigh *ipoib_neigh_alloc(u8 *daddr, + struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_neigh_table *ntbl = &priv->ntbl; + struct ipoib_neigh_hash *htbl; + struct ipoib_neigh *neigh; + u32 hash_val; + + htbl = rcu_dereference_protected(ntbl->htbl, + lockdep_is_held(&priv->lock)); + if (!htbl) { + neigh = NULL; + goto out_unlock; + } + + /* need to add a new neigh, but maybe some other thread succeeded? + * recalc hash, maybe hash resize took place so we do a search + */ + hash_val = ipoib_addr_hash(htbl, daddr); + for (neigh = rcu_dereference_protected(htbl->buckets[hash_val], + lockdep_is_held(&priv->lock)); + neigh != NULL; + neigh = rcu_dereference_protected(neigh->hnext, + lockdep_is_held(&priv->lock))) { + if (memcmp(daddr, neigh->daddr, INFINIBAND_ALEN) == 0) { + /* found, take one ref on behalf of the caller */ + if (!atomic_inc_not_zero(&neigh->refcnt)) { + /* deleted */ + neigh = NULL; + break; + } + neigh->alive = jiffies; + goto out_unlock; + } + } + + neigh = ipoib_neigh_ctor(daddr, dev); + if (!neigh) + goto out_unlock; + + /* one ref on behalf of the hash table */ + atomic_inc(&neigh->refcnt); + neigh->alive = jiffies; + /* put in hash */ + rcu_assign_pointer(neigh->hnext, + rcu_dereference_protected(htbl->buckets[hash_val], + lockdep_is_held(&priv->lock))); + rcu_assign_pointer(htbl->buckets[hash_val], neigh); + atomic_inc(&ntbl->entries); + +out_unlock: return neigh; } -void ipoib_neigh_free(struct net_device *dev, struct ipoib_neigh *neigh) +void ipoib_neigh_dtor(struct ipoib_neigh *neigh) { + /* neigh reference count was dropprd to zero */ + struct net_device *dev = neigh->dev; + struct ipoib_dev_priv *priv = netdev_priv(dev); struct sk_buff *skb; - *to_ipoib_neigh(neigh->neighbour) = NULL; + if (neigh->ah) + ipoib_put_ah(neigh->ah); while ((skb = __skb_dequeue(&neigh->queue))) { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } if (ipoib_cm_get(neigh)) ipoib_cm_destroy_tx(ipoib_cm_get(neigh)); + ipoib_dbg(netdev_priv(dev), + "neigh free for %06x %pI6\n", + IPOIB_QPN(neigh->daddr), + neigh->daddr + 4); kfree(neigh); + if (atomic_dec_and_test(&priv->ntbl.entries)) { + if (test_bit(IPOIB_NEIGH_TBL_FLUSH, &priv->flags)) + complete(&priv->ntbl.flushed); + } +} + +static void ipoib_neigh_reclaim(struct rcu_head *rp) +{ + /* Called as a result of removal from hash table */ + struct ipoib_neigh *neigh = container_of(rp, struct ipoib_neigh, rcu); + /* note TX context may hold another ref */ + ipoib_neigh_put(neigh); +} + +void ipoib_neigh_free(struct ipoib_neigh *neigh) +{ + struct net_device *dev = neigh->dev; + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_neigh_table *ntbl = &priv->ntbl; + struct ipoib_neigh_hash *htbl; + struct ipoib_neigh __rcu **np; + struct ipoib_neigh *n; + u32 hash_val; + + htbl = rcu_dereference_protected(ntbl->htbl, + lockdep_is_held(&priv->lock)); + if (!htbl) + return; + + hash_val = ipoib_addr_hash(htbl, neigh->daddr); + np = &htbl->buckets[hash_val]; + for (n = rcu_dereference_protected(*np, + lockdep_is_held(&priv->lock)); + n != NULL; + n = rcu_dereference_protected(*np, + lockdep_is_held(&priv->lock))) { + if (n == neigh) { + /* found */ + rcu_assign_pointer(*np, + rcu_dereference_protected(neigh->hnext, + lockdep_is_held(&priv->lock))); + call_rcu(&neigh->rcu, ipoib_neigh_reclaim); + return; + } else { + np = &n->hnext; + } + } } -static int ipoib_neigh_setup_dev(struct net_device *dev, struct neigh_parms *parms) +static int ipoib_neigh_hash_init(struct ipoib_dev_priv *priv) { - parms->neigh_cleanup = ipoib_neigh_cleanup; + struct ipoib_neigh_table *ntbl = &priv->ntbl; + struct ipoib_neigh_hash *htbl; + struct ipoib_neigh **buckets; + u32 size; + + clear_bit(IPOIB_NEIGH_TBL_FLUSH, &priv->flags); + ntbl->htbl = NULL; + htbl = kzalloc(sizeof(*htbl), GFP_KERNEL); + if (!htbl) + return -ENOMEM; + set_bit(IPOIB_STOP_NEIGH_GC, &priv->flags); + size = roundup_pow_of_two(arp_tbl.gc_thresh3); + buckets = kzalloc(size * sizeof(*buckets), GFP_KERNEL); + if (!buckets) { + kfree(htbl); + return -ENOMEM; + } + htbl->size = size; + htbl->mask = (size - 1); + htbl->buckets = buckets; + ntbl->htbl = htbl; + htbl->ntbl = ntbl; + atomic_set(&ntbl->entries, 0); + + /* start garbage collection */ + clear_bit(IPOIB_STOP_NEIGH_GC, &priv->flags); + queue_delayed_work(ipoib_workqueue, &priv->neigh_reap_task, + arp_tbl.gc_interval); return 0; } +static void neigh_hash_free_rcu(struct rcu_head *head) +{ + struct ipoib_neigh_hash *htbl = container_of(head, + struct ipoib_neigh_hash, + rcu); + struct ipoib_neigh __rcu **buckets = htbl->buckets; + struct ipoib_neigh_table *ntbl = htbl->ntbl; + + kfree(buckets); + kfree(htbl); + complete(&ntbl->deleted); +} + +void ipoib_del_neighs_by_gid(struct net_device *dev, u8 *gid) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_neigh_table *ntbl = &priv->ntbl; + struct ipoib_neigh_hash *htbl; + unsigned long flags; + int i; + + /* remove all neigh connected to a given path or mcast */ + spin_lock_irqsave(&priv->lock, flags); + + htbl = rcu_dereference_protected(ntbl->htbl, + lockdep_is_held(&priv->lock)); + + if (!htbl) + goto out_unlock; + + for (i = 0; i < htbl->size; i++) { + struct ipoib_neigh *neigh; + struct ipoib_neigh __rcu **np = &htbl->buckets[i]; + + while ((neigh = rcu_dereference_protected(*np, + lockdep_is_held(&priv->lock))) != NULL) { + /* delete neighs belong to this parent */ + if (!memcmp(gid, neigh->daddr + 4, sizeof (union ib_gid))) { + rcu_assign_pointer(*np, + rcu_dereference_protected(neigh->hnext, + lockdep_is_held(&priv->lock))); + /* remove from parent list */ + list_del(&neigh->list); + call_rcu(&neigh->rcu, ipoib_neigh_reclaim); + } else { + np = &neigh->hnext; + } + + } + } +out_unlock: + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) +{ + struct ipoib_neigh_table *ntbl = &priv->ntbl; + struct ipoib_neigh_hash *htbl; + unsigned long flags; + int i, wait_flushed = 0; + + init_completion(&priv->ntbl.flushed); + + spin_lock_irqsave(&priv->lock, flags); + + htbl = rcu_dereference_protected(ntbl->htbl, + lockdep_is_held(&priv->lock)); + if (!htbl) + goto out_unlock; + + wait_flushed = atomic_read(&priv->ntbl.entries); + if (!wait_flushed) + goto free_htbl; + + for (i = 0; i < htbl->size; i++) { + struct ipoib_neigh *neigh; + struct ipoib_neigh __rcu **np = &htbl->buckets[i]; + + while ((neigh = rcu_dereference_protected(*np, + lockdep_is_held(&priv->lock))) != NULL) { + rcu_assign_pointer(*np, + rcu_dereference_protected(neigh->hnext, + lockdep_is_held(&priv->lock))); + /* remove from path/mc list */ + list_del(&neigh->list); + call_rcu(&neigh->rcu, ipoib_neigh_reclaim); + } + } + +free_htbl: + rcu_assign_pointer(ntbl->htbl, NULL); + call_rcu(&htbl->rcu, neigh_hash_free_rcu); + +out_unlock: + spin_unlock_irqrestore(&priv->lock, flags); + if (wait_flushed) + wait_for_completion(&priv->ntbl.flushed); +} + +static void ipoib_neigh_hash_uninit(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + int stopped; + + ipoib_dbg(priv, "ipoib_neigh_hash_uninit\n"); + init_completion(&priv->ntbl.deleted); + set_bit(IPOIB_NEIGH_TBL_FLUSH, &priv->flags); + + /* Stop GC if called at init fail need to cancel work */ + stopped = test_and_set_bit(IPOIB_STOP_NEIGH_GC, &priv->flags); + if (!stopped) + cancel_delayed_work(&priv->neigh_reap_task); + + ipoib_flush_neighs(priv); + + wait_for_completion(&priv->ntbl.deleted); +} + + int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port) { struct ipoib_dev_priv *priv = netdev_priv(dev); + if (ipoib_neigh_hash_init(priv) < 0) + goto out; /* Allocate RX/TX "rings" to hold queued skbs */ priv->rx_ring = kzalloc(ipoib_recvq_size * sizeof *priv->rx_ring, GFP_KERNEL); if (!priv->rx_ring) { printk(KERN_WARNING "%s: failed to allocate RX ring (%d entries)\n", ca->name, ipoib_recvq_size); - goto out; + goto out_neigh_hash_cleanup; } priv->tx_ring = vzalloc(ipoib_sendq_size * sizeof *priv->tx_ring); @@ -954,6 +1248,8 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port) out_rx_ring_cleanup: kfree(priv->rx_ring); +out_neigh_hash_cleanup: + ipoib_neigh_hash_uninit(dev); out: return -ENOMEM; } @@ -966,6 +1262,9 @@ void ipoib_dev_cleanup(struct net_device *dev) /* Delete any child interfaces first */ list_for_each_entry_safe(cpriv, tcpriv, &priv->child_intfs, list) { + /* Stop GC on child */ + set_bit(IPOIB_STOP_NEIGH_GC, &cpriv->flags); + cancel_delayed_work(&cpriv->neigh_reap_task); unregister_netdev(cpriv->dev); ipoib_dev_cleanup(cpriv->dev); free_netdev(cpriv->dev); @@ -978,6 +1277,8 @@ void ipoib_dev_cleanup(struct net_device *dev) priv->rx_ring = NULL; priv->tx_ring = NULL; + + ipoib_neigh_hash_uninit(dev); } static const struct header_ops ipoib_header_ops = { @@ -992,7 +1293,6 @@ static const struct net_device_ops ipoib_netdev_ops = { .ndo_start_xmit = ipoib_start_xmit, .ndo_tx_timeout = ipoib_timeout, .ndo_set_rx_mode = ipoib_set_mcast_list, - .ndo_neigh_setup = ipoib_neigh_setup_dev, }; static void ipoib_setup(struct net_device *dev) @@ -1041,6 +1341,7 @@ static void ipoib_setup(struct net_device *dev) INIT_WORK(&priv->flush_heavy, ipoib_ib_dev_flush_heavy); INIT_WORK(&priv->restart_task, ipoib_mcast_restart_task); INIT_DELAYED_WORK(&priv->ah_reap_task, ipoib_reap_ah); + INIT_DELAYED_WORK(&priv->neigh_reap_task, ipoib_reap_neigh); } struct ipoib_dev_priv *ipoib_intf_alloc(const char *name) @@ -1281,6 +1582,9 @@ static struct net_device *ipoib_add_port(const char *format, register_failed: ib_unregister_event_handler(&priv->event_handler); + /* Stop GC if started before flush */ + set_bit(IPOIB_STOP_NEIGH_GC, &priv->flags); + cancel_delayed_work(&priv->neigh_reap_task); flush_workqueue(ipoib_workqueue); event_failed: @@ -1347,6 +1651,9 @@ static void ipoib_remove_one(struct ib_device *device) dev_change_flags(priv->dev, priv->dev->flags & ~IFF_UP); rtnl_unlock(); + /* Stop GC */ + set_bit(IPOIB_STOP_NEIGH_GC, &priv->flags); + cancel_delayed_work(&priv->neigh_reap_task); flush_workqueue(ipoib_workqueue); unregister_netdev(priv->dev); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 7cecb16d3d48c20e8237b1c1acdc173931a78979..75367249f447f497851e76a0a4312b6000989ff2 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -69,28 +69,13 @@ struct ipoib_mcast_iter { static void ipoib_mcast_free(struct ipoib_mcast *mcast) { struct net_device *dev = mcast->dev; - struct ipoib_dev_priv *priv = netdev_priv(dev); - struct ipoib_neigh *neigh, *tmp; int tx_dropped = 0; ipoib_dbg_mcast(netdev_priv(dev), "deleting multicast group %pI6\n", mcast->mcmember.mgid.raw); - spin_lock_irq(&priv->lock); - - list_for_each_entry_safe(neigh, tmp, &mcast->neigh_list, list) { - /* - * It's safe to call ipoib_put_ah() inside priv->lock - * here, because we know that mcast->ah will always - * hold one more reference, so ipoib_put_ah() will - * never do more than decrement the ref count. - */ - if (neigh->ah) - ipoib_put_ah(neigh->ah); - ipoib_neigh_free(dev, neigh); - } - - spin_unlock_irq(&priv->lock); + /* remove all neigh connected to this mcast */ + ipoib_del_neighs_by_gid(dev, mcast->mcmember.mgid.raw); if (mcast->ah) ipoib_put_ah(mcast->ah); @@ -655,17 +640,12 @@ static int ipoib_mcast_leave(struct net_device *dev, struct ipoib_mcast *mcast) return 0; } -void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb) +void ipoib_mcast_send(struct net_device *dev, u8 *daddr, struct sk_buff *skb) { struct ipoib_dev_priv *priv = netdev_priv(dev); - struct dst_entry *dst = skb_dst(skb); struct ipoib_mcast *mcast; - struct neighbour *n; unsigned long flags; - - n = NULL; - if (dst) - n = dst_neigh_lookup_skb(dst, skb); + void *mgid = daddr + 4; spin_lock_irqsave(&priv->lock, flags); @@ -721,28 +701,27 @@ void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb) out: if (mcast && mcast->ah) { - if (n) { - if (!*to_ipoib_neigh(n)) { - struct ipoib_neigh *neigh; - - neigh = ipoib_neigh_alloc(n, skb->dev); - if (neigh) { - kref_get(&mcast->ah->ref); - neigh->ah = mcast->ah; - list_add_tail(&neigh->list, - &mcast->neigh_list); - } + struct ipoib_neigh *neigh; + + spin_unlock_irqrestore(&priv->lock, flags); + neigh = ipoib_neigh_get(dev, daddr); + spin_lock_irqsave(&priv->lock, flags); + if (!neigh) { + neigh = ipoib_neigh_alloc(daddr, dev); + if (neigh) { + kref_get(&mcast->ah->ref); + neigh->ah = mcast->ah; + list_add_tail(&neigh->list, &mcast->neigh_list); } - neigh_release(n); } spin_unlock_irqrestore(&priv->lock, flags); ipoib_send(dev, skb, mcast->ah, IB_MULTICAST_QPN); + if (neigh) + ipoib_neigh_put(neigh); return; } unlock: - if (n) - neigh_release(n); spin_unlock_irqrestore(&priv->lock, flags); } diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index bcbf22ee0aa77d3b99ae3fcceabd3ebce1302ee9..1b5b0c7300549cefee683b3d5745b39a446b5bca 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -586,24 +586,62 @@ static void srp_unmap_data(struct scsi_cmnd *scmnd, scmnd->sc_data_direction); } -static void srp_remove_req(struct srp_target_port *target, - struct srp_request *req, s32 req_lim_delta) +/** + * srp_claim_req - Take ownership of the scmnd associated with a request. + * @target: SRP target port. + * @req: SRP request. + * @scmnd: If NULL, take ownership of @req->scmnd. If not NULL, only take + * ownership of @req->scmnd if it equals @scmnd. + * + * Return value: + * Either NULL or a pointer to the SCSI command the caller became owner of. + */ +static struct scsi_cmnd *srp_claim_req(struct srp_target_port *target, + struct srp_request *req, + struct scsi_cmnd *scmnd) +{ + unsigned long flags; + + spin_lock_irqsave(&target->lock, flags); + if (!scmnd) { + scmnd = req->scmnd; + req->scmnd = NULL; + } else if (req->scmnd == scmnd) { + req->scmnd = NULL; + } else { + scmnd = NULL; + } + spin_unlock_irqrestore(&target->lock, flags); + + return scmnd; +} + +/** + * srp_free_req() - Unmap data and add request to the free request list. + */ +static void srp_free_req(struct srp_target_port *target, + struct srp_request *req, struct scsi_cmnd *scmnd, + s32 req_lim_delta) { unsigned long flags; - srp_unmap_data(req->scmnd, target, req); + srp_unmap_data(scmnd, target, req); + spin_lock_irqsave(&target->lock, flags); target->req_lim += req_lim_delta; - req->scmnd = NULL; list_add_tail(&req->list, &target->free_reqs); spin_unlock_irqrestore(&target->lock, flags); } static void srp_reset_req(struct srp_target_port *target, struct srp_request *req) { - req->scmnd->result = DID_RESET << 16; - req->scmnd->scsi_done(req->scmnd); - srp_remove_req(target, req, 0); + struct scsi_cmnd *scmnd = srp_claim_req(target, req, NULL); + + if (scmnd) { + scmnd->result = DID_RESET << 16; + scmnd->scsi_done(scmnd); + srp_free_req(target, req, scmnd, 0); + } } static int srp_reconnect_target(struct srp_target_port *target) @@ -1073,11 +1111,18 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp) complete(&target->tsk_mgmt_done); } else { req = &target->req_ring[rsp->tag]; - scmnd = req->scmnd; - if (!scmnd) + scmnd = srp_claim_req(target, req, NULL); + if (!scmnd) { shost_printk(KERN_ERR, target->scsi_host, "Null scmnd for RSP w/tag %016llx\n", (unsigned long long) rsp->tag); + + spin_lock_irqsave(&target->lock, flags); + target->req_lim += be32_to_cpu(rsp->req_lim_delta); + spin_unlock_irqrestore(&target->lock, flags); + + return; + } scmnd->result = rsp->status; if (rsp->flags & SRP_RSP_FLAG_SNSVALID) { @@ -1092,7 +1137,9 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp) else if (rsp->flags & (SRP_RSP_FLAG_DIOVER | SRP_RSP_FLAG_DIUNDER)) scsi_set_resid(scmnd, be32_to_cpu(rsp->data_in_res_cnt)); - srp_remove_req(target, req, be32_to_cpu(rsp->req_lim_delta)); + srp_free_req(target, req, scmnd, + be32_to_cpu(rsp->req_lim_delta)); + scmnd->host_scribble = NULL; scmnd->scsi_done(scmnd); } @@ -1631,25 +1678,17 @@ static int srp_abort(struct scsi_cmnd *scmnd) { struct srp_target_port *target = host_to_target(scmnd->device->host); struct srp_request *req = (struct srp_request *) scmnd->host_scribble; - int ret = SUCCESS; shost_printk(KERN_ERR, target->scsi_host, "SRP abort called\n"); - if (!req || target->qp_in_error) + if (!req || target->qp_in_error || !srp_claim_req(target, req, scmnd)) return FAILED; - if (srp_send_tsk_mgmt(target, req->index, scmnd->device->lun, - SRP_TSK_ABORT_TASK)) - return FAILED; - - if (req->scmnd) { - if (!target->tsk_mgmt_status) { - srp_remove_req(target, req, 0); - scmnd->result = DID_ABORT << 16; - } else - ret = FAILED; - } + srp_send_tsk_mgmt(target, req->index, scmnd->device->lun, + SRP_TSK_ABORT_TASK); + srp_free_req(target, req, scmnd, 0); + scmnd->result = DID_ABORT << 16; - return ret; + return SUCCESS; } static int srp_reset_device(struct scsi_cmnd *scmnd) diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 7a0ce8d42887e225e81d20702892d8ed0d056f39..9e1449f8c6a26ea62349352de3f8178db2faa6fe 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -1469,7 +1469,7 @@ static void srpt_handle_send_comp(struct srpt_rdma_ch *ch, * * XXX: what is now target_execute_cmd used to be asynchronous, and unmapping * the data that has been transferred via IB RDMA had to be postponed until the - * check_stop_free() callback. None of this is nessecary anymore and needs to + * check_stop_free() callback. None of this is necessary anymore and needs to * be cleaned up. */ static void srpt_handle_rdma_comp(struct srpt_rdma_ch *ch, diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index ff4c0a87a25f9804441ac90561e7c97e24610e85..cdc252612c0b35c453b976355c13b26f6d6767e1 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -358,6 +358,7 @@ static void imx_keypad_inhibit(struct imx_keypad *keypad) /* Inhibit KDI and KRI interrupts. */ reg_val = readw(keypad->mmio_base + KPSR); reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE); + reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD; writew(reg_val, keypad->mmio_base + KPSR); /* Colums as open drain and disable all rows */ @@ -515,7 +516,9 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev) input_set_drvdata(input_dev, keypad); /* Ensure that the keypad will stay dormant until opened */ + clk_prepare_enable(keypad->clk); imx_keypad_inhibit(keypad); + clk_disable_unprepare(keypad->clk); error = request_irq(irq, imx_keypad_irq_handler, 0, pdev->name, keypad); diff --git a/drivers/input/misc/ab8500-ponkey.c b/drivers/input/misc/ab8500-ponkey.c index f06231b7cab1ef762d7ad5db073b3a6b64d39987..84ec691c05aa983751492a8dff29c5ca87b27ad2 100644 --- a/drivers/input/misc/ab8500-ponkey.c +++ b/drivers/input/misc/ab8500-ponkey.c @@ -74,8 +74,8 @@ static int __devinit ab8500_ponkey_probe(struct platform_device *pdev) ponkey->idev = input; ponkey->ab8500 = ab8500; - ponkey->irq_dbf = ab8500_irq_get_virq(ab8500, irq_dbf); - ponkey->irq_dbr = ab8500_irq_get_virq(ab8500, irq_dbr); + ponkey->irq_dbf = irq_dbf; + ponkey->irq_dbr = irq_dbr; input->name = "AB8500 POn(PowerOn) Key"; input->dev.parent = &pdev->dev; diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 3f5649f190824408a25c495bdfd4da88b8febe9a..a261d857691957a98e732124f6370c6f8280451a 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -721,6 +721,17 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) switch (psmouse->packet[0] >> FSP_PKT_TYPE_SHIFT) { case FSP_PKT_TYPE_ABS: + + if ((packet[0] == 0x48 || packet[0] == 0x49) && + packet[1] == 0 && packet[2] == 0) { + /* + * Ignore coordinate noise when finger leaving the + * surface, otherwise cursor may jump to upper-left + * corner. + */ + packet[3] &= 0xf0; + } + abs_x = GET_ABS_X(packet); abs_y = GET_ABS_Y(packet); diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index 2ffd110bd5bc756e461051d39ba31238202a0fa7..2e77246c2e5ac8293569ecd19fe1df673c394c75 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -72,7 +72,7 @@ static int amba_kmi_open(struct serio *io) unsigned int divisor; int ret; - ret = clk_enable(kmi->clk); + ret = clk_prepare_enable(kmi->clk); if (ret) goto out; @@ -92,7 +92,7 @@ static int amba_kmi_open(struct serio *io) return 0; clk_disable: - clk_disable(kmi->clk); + clk_disable_unprepare(kmi->clk); out: return ret; } @@ -104,7 +104,7 @@ static void amba_kmi_close(struct serio *io) writeb(0, KMICR); free_irq(kmi->irq, kmi); - clk_disable(kmi->clk); + clk_disable_unprepare(kmi->clk); } static int __devinit amba_kmi_probe(struct amba_device *dev, diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 09a089996ded673788e8302b7854e2a4669960d8..d7a7e54f64651227ca893f20ba729b72bb2c6d2d 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -878,7 +878,7 @@ static int __init hp_sdc_init(void) #endif errstr = "IRQ not available for"; - if (request_irq(hp_sdc.irq, &hp_sdc_isr, IRQF_SHARED|IRQF_SAMPLE_RANDOM, + if (request_irq(hp_sdc.irq, &hp_sdc_isr, IRQF_SHARED, "HP SDC", &hp_sdc)) goto err1; diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 5ec774d6c82b4be13f06c97efffe7cc42860ebab..d6cc77a53c7e2bdbe94ee3c138ab8c86f0d90135 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -176,6 +176,20 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"), }, }, + { + /* Gigabyte T1005 - defines wrong chassis type ("Other") */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "T1005"), + }, + }, + { + /* Gigabyte T1005M/P - defines wrong chassis type ("Other") */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "T1005M/P"), + }, + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), @@ -319,6 +333,12 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "EQUIUM A110"), }, }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE C850D"), + }, + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"), diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 002041975de9c902f193f2448865d051f0ce98dc..532d067a9e07a0745188eb3dab8e4025ef7b664f 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1848,7 +1848,10 @@ static const struct wacom_features wacom_features_0x2A = { "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, 63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xF4 = - { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, + { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, + 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xF8 = + { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x3F = { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, @@ -2091,6 +2094,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xEF) }, { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_WACOM(0xF4) }, + { USB_DEVICE_WACOM(0xF8) }, { USB_DEVICE_WACOM(0xFA) }, { USB_DEVICE_LENOVO(0x6004) }, { } diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 9afc777a40a7077a5bbd667944f1c1ee3bac38d7..64957770b52209fcc527e3f015e21816b3165bc7 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -566,9 +566,12 @@ static ssize_t edt_ft5x06_debugfs_raw_data_read(struct file *file, } read = min_t(size_t, count, tsdata->raw_bufsize - *off); - error = copy_to_user(buf, tsdata->raw_buffer + *off, read); - if (!error) - *off += read; + if (copy_to_user(buf, tsdata->raw_buffer + *off, read)) { + error = -EFAULT; + goto out; + } + + *off += read; out: mutex_unlock(&tsdata->mutex); return error ?: read; @@ -602,6 +605,7 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata) { if (tsdata->debug_dir) debugfs_remove_recursive(tsdata->debug_dir); + kfree(tsdata->raw_buffer); } #else @@ -843,7 +847,6 @@ static int __devexit edt_ft5x06_ts_remove(struct i2c_client *client) if (gpio_is_valid(pdata->reset_pin)) gpio_free(pdata->reset_pin); - kfree(tsdata->raw_buffer); kfree(tsdata); return 0; diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 503c7096ed36263aac57c0165e846cb2d46fae49..908407efc672be69bcc0a13c5603b38b45d50440 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -48,7 +48,7 @@ struct eeti_ts_priv { struct input_dev *input; struct work_struct work; struct mutex mutex; - int irq, irq_active_high; + int irq_gpio, irq, irq_active_high; }; #define EETI_TS_BITDEPTH (11) @@ -62,7 +62,7 @@ struct eeti_ts_priv { static inline int eeti_ts_irq_active(struct eeti_ts_priv *priv) { - return gpio_get_value(irq_to_gpio(priv->irq)) == priv->irq_active_high; + return gpio_get_value(priv->irq_gpio) == priv->irq_active_high; } static void eeti_ts_read(struct work_struct *work) @@ -157,7 +157,7 @@ static void eeti_ts_close(struct input_dev *dev) static int __devinit eeti_ts_probe(struct i2c_client *client, const struct i2c_device_id *idp) { - struct eeti_ts_platform_data *pdata; + struct eeti_ts_platform_data *pdata = client->dev.platform_data; struct eeti_ts_priv *priv; struct input_dev *input; unsigned int irq_flags; @@ -199,9 +199,12 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, priv->client = client; priv->input = input; - priv->irq = client->irq; + priv->irq_gpio = pdata->irq_gpio; + priv->irq = gpio_to_irq(pdata->irq_gpio); - pdata = client->dev.platform_data; + err = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name); + if (err < 0) + goto err1; if (pdata) priv->irq_active_high = pdata->irq_active_high; @@ -215,13 +218,13 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, err = input_register_device(input); if (err) - goto err1; + goto err2; err = request_irq(priv->irq, eeti_ts_isr, irq_flags, client->name, priv); if (err) { dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); - goto err2; + goto err3; } /* @@ -233,9 +236,11 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, device_init_wakeup(&client->dev, 0); return 0; -err2: +err3: input_unregister_device(input); input = NULL; /* so we dont try to free it below */ +err2: + gpio_free(pdata->irq_gpio); err1: input_free_device(input); kfree(priv); diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index e32709e0dd65193286bccc2e81bd4e86d717c643..721fdb3597ca9d9ecb3f971f389f6852395ff39c 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -304,6 +304,45 @@ static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #define EGALAX_PKT_TYPE_REPT 0x80 #define EGALAX_PKT_TYPE_DIAG 0x0A +static int egalax_init(struct usbtouch_usb *usbtouch) +{ + int ret, i; + unsigned char *buf; + struct usb_device *udev = interface_to_usbdev(usbtouch->interface); + + /* + * An eGalax diagnostic packet kicks the device into using the right + * protocol. We send a "check active" packet. The response will be + * read later and ignored. + */ + + buf = kmalloc(3, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = EGALAX_PKT_TYPE_DIAG; + buf[1] = 1; /* length */ + buf[2] = 'A'; /* command - check active */ + + for (i = 0; i < 3; i++) { + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, buf, 3, + USB_CTRL_SET_TIMEOUT); + if (ret >= 0) { + ret = 0; + break; + } + if (ret != -EPIPE) + break; + } + + kfree(buf); + + return ret; +} + static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT) @@ -1056,6 +1095,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .process_pkt = usbtouch_process_multi, .get_pkt_len = egalax_get_pkt_len, .read_data = egalax_read_data, + .init = egalax_init, }, #endif diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index 6d1cbdfc9b2a1af4a583460e8c4a5e5c80aabdfc..e89daf1b21b49159e549ce863f45dd72e39b1b56 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -266,7 +266,7 @@ static void swap_pci_ref(struct pci_dev **from, struct pci_dev *to) static int iommu_init_device(struct device *dev) { - struct pci_dev *dma_pdev, *pdev = to_pci_dev(dev); + struct pci_dev *dma_pdev = NULL, *pdev = to_pci_dev(dev); struct iommu_dev_data *dev_data; struct iommu_group *group; u16 alias; @@ -293,11 +293,18 @@ static int iommu_init_device(struct device *dev) dev_data->alias_data = alias_data; dma_pdev = pci_get_bus_and_slot(alias >> 8, alias & 0xff); - } else + } + + if (dma_pdev == NULL) dma_pdev = pci_dev_get(pdev); + /* Account for quirked devices */ swap_pci_ref(&dma_pdev, pci_get_dma_source(dma_pdev)); + /* + * If it's a multifunction device that does not support our + * required ACS flags, add to the same group as function 0. + */ if (dma_pdev->multifunction && !pci_acs_enabled(dma_pdev, REQ_ACS_FLAGS)) swap_pci_ref(&dma_pdev, @@ -305,14 +312,28 @@ static int iommu_init_device(struct device *dev) PCI_DEVFN(PCI_SLOT(dma_pdev->devfn), 0))); + /* + * Devices on the root bus go through the iommu. If that's not us, + * find the next upstream device and test ACS up to the root bus. + * Finding the next device may require skipping virtual buses. + */ while (!pci_is_root_bus(dma_pdev->bus)) { - if (pci_acs_path_enabled(dma_pdev->bus->self, - NULL, REQ_ACS_FLAGS)) + struct pci_bus *bus = dma_pdev->bus; + + while (!bus->self) { + if (!pci_is_root_bus(bus)) + bus = bus->parent; + else + goto root_bus; + } + + if (pci_acs_path_enabled(bus->self, NULL, REQ_ACS_FLAGS)) break; - swap_pci_ref(&dma_pdev, pci_dev_get(dma_pdev->bus->self)); + swap_pci_ref(&dma_pdev, pci_dev_get(bus->self)); } +root_bus: group = iommu_group_get(&dma_pdev->dev); pci_dev_put(dma_pdev); if (!group) { diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index 500e7f15f5c266043d5d2bdc27a04f489595be79..18a89b760aaa3d78940021f0637e7f090116bb23 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -1111,7 +1111,7 @@ static void print_iommu_info(void) if (iommu->cap & (1 << IOMMU_CAP_EFR)) { pr_info("AMD-Vi: Extended features: "); - for (i = 0; ARRAY_SIZE(feat_str); ++i) { + for (i = 0; i < ARRAY_SIZE(feat_str); ++i) { if (iommu_feature(iommu, (1ULL << i))) pr_cont(" %s", feat_str[i]); } @@ -1131,9 +1131,6 @@ static int __init amd_iommu_init_pci(void) break; } - /* Make sure ACS will be enabled */ - pci_request_acs(); - ret = amd_iommu_init_devices(); print_iommu_info(); @@ -1652,6 +1649,9 @@ static bool detect_ivrs(void) early_acpi_os_unmap_memory((char __iomem *)ivrs_base, ivrs_size); + /* Make sure ACS will be enabled during PCI probe */ + pci_request_acs(); + return true; } diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c index 45350ff5e93c9cbe58c1f73c49e932c5f57eb376..80bad32aa46394443ad5a0aaa4a241c4e0e4b2c0 100644 --- a/drivers/iommu/exynos-iommu.c +++ b/drivers/iommu/exynos-iommu.c @@ -732,9 +732,9 @@ static int exynos_iommu_domain_init(struct iommu_domain *domain) spin_lock_init(&priv->pgtablelock); INIT_LIST_HEAD(&priv->clients); - dom->geometry.aperture_start = 0; - dom->geometry.aperture_end = ~0UL; - dom->geometry.force_aperture = true; + domain->geometry.aperture_start = 0; + domain->geometry.aperture_end = ~0UL; + domain->geometry.force_aperture = true; domain->priv = priv; return 0; diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 7469b5346643595fe1788b04d76135ed30075cfd..2297ec193eb4b645812c85519c335361e935f296 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -2008,6 +2008,7 @@ static struct dmar_domain *get_domain_for_dev(struct pci_dev *pdev, int gaw) if (!drhd) { printk(KERN_ERR "IOMMU: can't find DMAR for device %s\n", pci_name(pdev)); + free_domain_mem(domain); return NULL; } iommu = drhd->iommu; @@ -4124,8 +4125,13 @@ static int intel_iommu_add_device(struct device *dev) } else dma_pdev = pci_dev_get(pdev); + /* Account for quirked devices */ swap_pci_ref(&dma_pdev, pci_get_dma_source(dma_pdev)); + /* + * If it's a multifunction device that does not support our + * required ACS flags, add to the same group as function 0. + */ if (dma_pdev->multifunction && !pci_acs_enabled(dma_pdev, REQ_ACS_FLAGS)) swap_pci_ref(&dma_pdev, @@ -4133,14 +4139,28 @@ static int intel_iommu_add_device(struct device *dev) PCI_DEVFN(PCI_SLOT(dma_pdev->devfn), 0))); + /* + * Devices on the root bus go through the iommu. If that's not us, + * find the next upstream device and test ACS up to the root bus. + * Finding the next device may require skipping virtual buses. + */ while (!pci_is_root_bus(dma_pdev->bus)) { - if (pci_acs_path_enabled(dma_pdev->bus->self, - NULL, REQ_ACS_FLAGS)) + struct pci_bus *bus = dma_pdev->bus; + + while (!bus->self) { + if (!pci_is_root_bus(bus)) + bus = bus->parent; + else + goto root_bus; + } + + if (pci_acs_path_enabled(bus->self, NULL, REQ_ACS_FLAGS)) break; - swap_pci_ref(&dma_pdev, pci_dev_get(dma_pdev->bus->self)); + swap_pci_ref(&dma_pdev, pci_dev_get(bus->self)); } +root_bus: group = iommu_group_get(&dma_pdev->dev); pci_dev_put(dma_pdev); if (!group) { diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c index e0b18f3ae9a862a22a8bc2ebe2eccc224c456252..af8904de1d44e63ca35be4a58320889b2bab7a8b 100644 --- a/drivers/iommu/intel_irq_remapping.c +++ b/drivers/iommu/intel_irq_remapping.c @@ -736,6 +736,7 @@ int __init parse_ioapics_under_ir(void) { struct dmar_drhd_unit *drhd; int ir_supported = 0; + int ioapic_idx; for_each_drhd_unit(drhd) { struct intel_iommu *iommu = drhd->iommu; @@ -748,13 +749,20 @@ int __init parse_ioapics_under_ir(void) } } - if (ir_supported && ir_ioapic_num != nr_ioapics) { - printk(KERN_WARNING - "Not all IO-APIC's listed under remapping hardware\n"); - return -1; + if (!ir_supported) + return 0; + + for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) { + int ioapic_id = mpc_ioapic_id(ioapic_idx); + if (!map_ioapic_to_ir(ioapic_id)) { + pr_err(FW_BUG "ioapic %d has no mapping iommu, " + "interrupt remapping will be disabled\n", + ioapic_id); + return -1; + } } - return ir_supported; + return 1; } int __init ir_dev_scope_init(void) diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c index 4ba325ab626249c2aa2aee1271a6d0c68ec20d9a..2a4bb36bc6888a9c91aee304df7c19bad1e42f83 100644 --- a/drivers/iommu/tegra-smmu.c +++ b/drivers/iommu/tegra-smmu.c @@ -799,14 +799,14 @@ static void smmu_iommu_detach_dev(struct iommu_domain *domain, goto out; } } - dev_err(smmu->dev, "Couldn't find %s\n", dev_name(c->dev)); + dev_err(smmu->dev, "Couldn't find %s\n", dev_name(dev)); out: spin_unlock(&as->client_lock); } static int smmu_iommu_domain_init(struct iommu_domain *domain) { - int i, err = -ENODEV; + int i, err = -EAGAIN; unsigned long flags; struct smmu_as *as; struct smmu_device *smmu = smmu_handle; @@ -814,11 +814,14 @@ static int smmu_iommu_domain_init(struct iommu_domain *domain) /* Look for a free AS with lock held */ for (i = 0; i < smmu->num_as; i++) { as = &smmu->as[i]; - if (!as->pdir_page) { - err = alloc_pdir(as); - if (!err) - goto found; - } + + if (as->pdir_page) + continue; + + err = alloc_pdir(as); + if (!err) + goto found; + if (err != -EAGAIN) break; } diff --git a/drivers/isdn/hardware/mISDN/avmfritz.c b/drivers/isdn/hardware/mISDN/avmfritz.c index fa6ca473372539fda128a7a1ec46d9c4d13c3c4a..dceaec821b0e5324cbfa2d92bdb7334845bf9262 100644 --- a/drivers/isdn/hardware/mISDN/avmfritz.c +++ b/drivers/isdn/hardware/mISDN/avmfritz.c @@ -857,8 +857,9 @@ avm_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg) switch (cmd) { case CLOSE_CHANNEL: test_and_clear_bit(FLG_OPEN, &bch->Flags); + cancel_work_sync(&bch->workq); spin_lock_irqsave(&fc->lock, flags); - mISDN_freebchannel(bch); + mISDN_clear_bchannel(bch); modehdlc(bch, ISDN_P_NONE); spin_unlock_irqrestore(&fc->lock, flags); ch->protocol = ISDN_P_NONE; diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 5e402cf2e79506b82288140334da60eb4e923e6d..f02794203bb193b41291efc3bc6d8457b2043883 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -5059,6 +5059,7 @@ hfcmulti_init(struct hm_map *m, struct pci_dev *pdev, printk(KERN_INFO "HFC-E1 #%d has overlapping B-channels on fragment #%d\n", E1_cnt + 1, pt); + kfree(hc); return -EINVAL; } maskcheck |= hc->bmask[pt]; @@ -5086,6 +5087,7 @@ hfcmulti_init(struct hm_map *m, struct pci_dev *pdev, if ((poll >> 1) > sizeof(hc->silence_data)) { printk(KERN_ERR "HFCMULTI error: silence_data too small, " "please fix\n"); + kfree(hc); return -EINVAL; } for (i = 0; i < (poll >> 1); i++) diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c index 752e0825591fbed9e820044495d42b9a80842320..ccd7d851be26d27913a26656cdef1fc838c90870 100644 --- a/drivers/isdn/hardware/mISDN/mISDNipac.c +++ b/drivers/isdn/hardware/mISDN/mISDNipac.c @@ -1406,8 +1406,9 @@ hscx_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg) switch (cmd) { case CLOSE_CHANNEL: test_and_clear_bit(FLG_OPEN, &bch->Flags); + cancel_work_sync(&bch->workq); spin_lock_irqsave(hx->ip->hwlock, flags); - mISDN_freebchannel(bch); + mISDN_clear_bchannel(bch); hscx_mode(hx, ISDN_P_NONE); spin_unlock_irqrestore(hx->ip->hwlock, flags); ch->protocol = ISDN_P_NONE; diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c index be5973ded6d6e4288fe8fdebd0967150228ff937..182ecf0626c2098e3c38c4da0eeea54a1197ce7d 100644 --- a/drivers/isdn/hardware/mISDN/mISDNisar.c +++ b/drivers/isdn/hardware/mISDN/mISDNisar.c @@ -1588,8 +1588,9 @@ isar_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg) switch (cmd) { case CLOSE_CHANNEL: test_and_clear_bit(FLG_OPEN, &bch->Flags); + cancel_work_sync(&bch->workq); spin_lock_irqsave(ich->is->hwlock, flags); - mISDN_freebchannel(bch); + mISDN_clear_bchannel(bch); modeisar(ich, ISDN_P_NONE); spin_unlock_irqrestore(ich->is->hwlock, flags); ch->protocol = ISDN_P_NONE; diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c index c3e3e76862731496b6bea5d35b3ca8ef5662e486..9bcade59eb73bdf24f72e8fa5a6e08e4be641f1c 100644 --- a/drivers/isdn/hardware/mISDN/netjet.c +++ b/drivers/isdn/hardware/mISDN/netjet.c @@ -812,8 +812,9 @@ nj_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg) switch (cmd) { case CLOSE_CHANNEL: test_and_clear_bit(FLG_OPEN, &bch->Flags); + cancel_work_sync(&bch->workq); spin_lock_irqsave(&card->lock, flags); - mISDN_freebchannel(bch); + mISDN_clear_bchannel(bch); mode_tiger(bc, ISDN_P_NONE); spin_unlock_irqrestore(&card->lock, flags); ch->protocol = ISDN_P_NONE; diff --git a/drivers/isdn/hardware/mISDN/w6692.c b/drivers/isdn/hardware/mISDN/w6692.c index 26a86b8460992e5e98c722f8b6487fb8ff1fe932..335fe6455002c708cfb0be66318b2473f4cdfcc7 100644 --- a/drivers/isdn/hardware/mISDN/w6692.c +++ b/drivers/isdn/hardware/mISDN/w6692.c @@ -1054,8 +1054,9 @@ w6692_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg) switch (cmd) { case CLOSE_CHANNEL: test_and_clear_bit(FLG_OPEN, &bch->Flags); + cancel_work_sync(&bch->workq); spin_lock_irqsave(&card->lock, flags); - mISDN_freebchannel(bch); + mISDN_clear_bchannel(bch); w6692_mode(bc, ISDN_P_NONE); spin_unlock_irqrestore(&card->lock, flags); ch->protocol = ISDN_P_NONE; diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c index 5405ec644db3ee910df3765499300f11f7d1832c..baf2686aa8eb0cb027044e815dafa8b2aa6afae4 100644 --- a/drivers/isdn/isdnloop/isdnloop.c +++ b/drivers/isdn/isdnloop/isdnloop.c @@ -16,7 +16,6 @@ #include #include "isdnloop.h" -static char *revision = "$Revision: 1.11.6.7 $"; static char *isdnloop_id = "loop0"; MODULE_DESCRIPTION("ISDN4Linux: Pseudo Driver that simulates an ISDN card"); @@ -1494,17 +1493,6 @@ isdnloop_addcard(char *id1) static int __init isdnloop_init(void) { - char *p; - char rev[10]; - - if ((p = strchr(revision, ':'))) { - strcpy(rev, p + 1); - p = strchr(rev, '$'); - *p = 0; - } else - strcpy(rev, " ??? "); - printk(KERN_NOTICE "isdnloop-ISDN-driver Rev%s\n", rev); - if (isdnloop_id) return (isdnloop_addcard(isdnloop_id)); diff --git a/drivers/isdn/mISDN/hwchannel.c b/drivers/isdn/mISDN/hwchannel.c index ef34fd40867cb6b7f5b767542c4da2e173d6b9cc..2602be23f341287468524c9fbd79e33a18e21aa6 100644 --- a/drivers/isdn/mISDN/hwchannel.c +++ b/drivers/isdn/mISDN/hwchannel.c @@ -148,17 +148,16 @@ mISDN_clear_bchannel(struct bchannel *ch) ch->next_minlen = ch->init_minlen; ch->maxlen = ch->init_maxlen; ch->next_maxlen = ch->init_maxlen; + skb_queue_purge(&ch->rqueue); + ch->rcount = 0; } EXPORT_SYMBOL(mISDN_clear_bchannel); -int +void mISDN_freebchannel(struct bchannel *ch) { + cancel_work_sync(&ch->workq); mISDN_clear_bchannel(ch); - skb_queue_purge(&ch->rqueue); - ch->rcount = 0; - flush_work_sync(&ch->workq); - return 0; } EXPORT_SYMBOL(mISDN_freebchannel); diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c index 0dc8abca14079223c868effc3258e4b5f36590fe..949cabb88f1c113c9606d26ff72627f6cf9db108 100644 --- a/drivers/isdn/mISDN/layer2.c +++ b/drivers/isdn/mISDN/layer2.c @@ -2222,7 +2222,7 @@ create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, int tei, InitWin(l2); l2->l2m.fsm = &l2fsm; if (test_bit(FLG_LAPB, &l2->flag) || - test_bit(FLG_PTP, &l2->flag) || + test_bit(FLG_FIXED_TEI, &l2->flag) || test_bit(FLG_LAPD_NET, &l2->flag)) l2->l2m.state = ST_L2_4; else diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c index 6157cbbf41131cb1f2fdf7b4f02e96f48771a8b1..363975b3c925989badc13117d7a5309a5860a1b8 100644 --- a/drivers/leds/led-triggers.c +++ b/drivers/leds/led-triggers.c @@ -224,7 +224,7 @@ void led_trigger_event(struct led_trigger *trig, struct led_classdev *led_cdev; led_cdev = list_entry(entry, struct led_classdev, trig_list); - led_set_brightness(led_cdev, brightness); + __led_set_brightness(led_cdev, brightness); } read_unlock(&trig->leddev_list_lock); } diff --git a/drivers/leds/leds-lp8788.c b/drivers/leds/leds-lp8788.c index 53bd136f1ef070a1e045b97f8dbc6b55e30c0ca6..0ade6ebfc914dba6e6809b46a428fc9ee219b83e 100644 --- a/drivers/leds/leds-lp8788.c +++ b/drivers/leds/leds-lp8788.c @@ -63,7 +63,7 @@ static int lp8788_led_init_device(struct lp8788_led *led, /* scale configuration */ addr = LP8788_ISINK_CTRL; mask = 1 << (cfg->num + LP8788_ISINK_SCALE_OFFSET); - val = cfg->scale << cfg->num; + val = cfg->scale << (cfg->num + LP8788_ISINK_SCALE_OFFSET); ret = lp8788_update_bits(led->lp, addr, mask, val); if (ret) return ret; diff --git a/drivers/leds/leds-renesas-tpu.c b/drivers/leds/leds-renesas-tpu.c index 9ee12c28059a0a8e60bc879dd083db2b90ae2fdc..771ea067e680f8b64e9cd54672007a5d66091d9c 100644 --- a/drivers/leds/leds-renesas-tpu.c +++ b/drivers/leds/leds-renesas-tpu.c @@ -247,7 +247,7 @@ static int __devinit r_tpu_probe(struct platform_device *pdev) if (!cfg) { dev_err(&pdev->dev, "missing platform data\n"); - goto err0; + return -ENODEV; } p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 1eee45b69b71617f9108a88b10085a56bef42c3c..d949b781f6f8b3df59e3952936e3cec7c5d769da 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -268,13 +268,14 @@ config DM_MIRROR needed for live data migration tools such as 'pvmove'. config DM_RAID - tristate "RAID 1/4/5/6 target" + tristate "RAID 1/4/5/6/10 target" depends on BLK_DEV_DM select MD_RAID1 + select MD_RAID10 select MD_RAID456 select BLK_DEV_MD ---help--- - A dm target that supports RAID1, RAID4, RAID5 and RAID6 mappings + A dm target that supports RAID1, RAID10, RAID4, RAID5 and RAID6 mappings A RAID-5 set of N drives with a capacity of C MB per drive provides the capacity of C * (N - 1) MB, and protects against a failure diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 15dbe03117e473da9ce6166b6978b7f496b7bc2a..94e7f6ba2e11e1c4479d82b8e840f38cb89e0f0b 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1305,7 +1305,7 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect prepare_to_wait(&bitmap->overflow_wait, &__wait, TASK_UNINTERRUPTIBLE); spin_unlock_irq(&bitmap->counts.lock); - io_schedule(); + schedule(); finish_wait(&bitmap->overflow_wait, &__wait); continue; } diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index d8abb90a6c2fbecae99ae2de09ebc2f3d726731e..034233eefc8266eba122556fc6ffdb36e054eced 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1555,6 +1555,7 @@ static int multipath_ioctl(struct dm_target *ti, unsigned int cmd, unsigned long arg) { struct multipath *m = ti->private; + struct pgpath *pgpath; struct block_device *bdev; fmode_t mode; unsigned long flags; @@ -1570,12 +1571,14 @@ static int multipath_ioctl(struct dm_target *ti, unsigned int cmd, if (!m->current_pgpath) __choose_pgpath(m, 0); - if (m->current_pgpath) { - bdev = m->current_pgpath->path.dev->bdev; - mode = m->current_pgpath->path.dev->mode; + pgpath = m->current_pgpath; + + if (pgpath) { + bdev = pgpath->path.dev->bdev; + mode = pgpath->path.dev->mode; } - if (m->queue_io) + if ((pgpath && m->queue_io) || (!pgpath && m->queue_if_no_path)) r = -EAGAIN; else if (!bdev) r = -EIO; diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index f2f29c52654480314c1219e3524a7239821384c4..982e3e390c458ceadeab3b5f9618cf4e1bb5891e 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -11,6 +11,7 @@ #include "md.h" #include "raid1.h" #include "raid5.h" +#include "raid10.h" #include "bitmap.h" #include @@ -52,7 +53,10 @@ struct raid_dev { #define DMPF_MAX_RECOVERY_RATE 0x20 #define DMPF_MAX_WRITE_BEHIND 0x40 #define DMPF_STRIPE_CACHE 0x80 -#define DMPF_REGION_SIZE 0X100 +#define DMPF_REGION_SIZE 0x100 +#define DMPF_RAID10_COPIES 0x200 +#define DMPF_RAID10_FORMAT 0x400 + struct raid_set { struct dm_target *ti; @@ -76,6 +80,7 @@ static struct raid_type { const unsigned algorithm; /* RAID algorithm. */ } raid_types[] = { {"raid1", "RAID1 (mirroring)", 0, 2, 1, 0 /* NONE */}, + {"raid10", "RAID10 (striped mirrors)", 0, 2, 10, UINT_MAX /* Varies */}, {"raid4", "RAID4 (dedicated parity disk)", 1, 2, 5, ALGORITHM_PARITY_0}, {"raid5_la", "RAID5 (left asymmetric)", 1, 2, 5, ALGORITHM_LEFT_ASYMMETRIC}, {"raid5_ra", "RAID5 (right asymmetric)", 1, 2, 5, ALGORITHM_RIGHT_ASYMMETRIC}, @@ -86,6 +91,17 @@ static struct raid_type { {"raid6_nc", "RAID6 (N continue)", 2, 4, 6, ALGORITHM_ROTATING_N_CONTINUE} }; +static unsigned raid10_md_layout_to_copies(int layout) +{ + return layout & 0xFF; +} + +static int raid10_format_to_md_layout(char *format, unsigned copies) +{ + /* 1 "far" copy, and 'copies' "near" copies */ + return (1 << 8) | (copies & 0xFF); +} + static struct raid_type *get_raid_type(char *name) { int i; @@ -339,10 +355,16 @@ static int validate_region_size(struct raid_set *rs, unsigned long region_size) * [max_write_behind ] See '-write-behind=' (man mdadm) * [stripe_cache ] Stripe cache size for higher RAIDs * [region_size ] Defines granularity of bitmap + * + * RAID10-only options: + * [raid10_copies <# copies>] Number of copies. (Default: 2) + * [raid10_format ] Layout algorithm. (Default: near) */ static int parse_raid_params(struct raid_set *rs, char **argv, unsigned num_raid_params) { + char *raid10_format = "near"; + unsigned raid10_copies = 2; unsigned i, rebuild_cnt = 0; unsigned long value, region_size = 0; sector_t sectors_per_dev = rs->ti->len; @@ -416,11 +438,28 @@ static int parse_raid_params(struct raid_set *rs, char **argv, } key = argv[i++]; + + /* Parameters that take a string value are checked here. */ + if (!strcasecmp(key, "raid10_format")) { + if (rs->raid_type->level != 10) { + rs->ti->error = "'raid10_format' is an invalid parameter for this RAID type"; + return -EINVAL; + } + if (strcmp("near", argv[i])) { + rs->ti->error = "Invalid 'raid10_format' value given"; + return -EINVAL; + } + raid10_format = argv[i]; + rs->print_flags |= DMPF_RAID10_FORMAT; + continue; + } + if (strict_strtoul(argv[i], 10, &value) < 0) { rs->ti->error = "Bad numerical argument given in raid params"; return -EINVAL; } + /* Parameters that take a numeric value are checked here */ if (!strcasecmp(key, "rebuild")) { rebuild_cnt++; @@ -439,6 +478,7 @@ static int parse_raid_params(struct raid_set *rs, char **argv, return -EINVAL; } break; + case 10: default: DMERR("The rebuild parameter is not supported for %s", rs->raid_type->name); rs->ti->error = "Rebuild not supported for this RAID type"; @@ -495,7 +535,8 @@ static int parse_raid_params(struct raid_set *rs, char **argv, */ value /= 2; - if (rs->raid_type->level < 5) { + if ((rs->raid_type->level != 5) && + (rs->raid_type->level != 6)) { rs->ti->error = "Inappropriate argument: stripe_cache"; return -EINVAL; } @@ -520,6 +561,14 @@ static int parse_raid_params(struct raid_set *rs, char **argv, } else if (!strcasecmp(key, "region_size")) { rs->print_flags |= DMPF_REGION_SIZE; region_size = value; + } else if (!strcasecmp(key, "raid10_copies") && + (rs->raid_type->level == 10)) { + if ((value < 2) || (value > 0xFF)) { + rs->ti->error = "Bad value for 'raid10_copies'"; + return -EINVAL; + } + rs->print_flags |= DMPF_RAID10_COPIES; + raid10_copies = value; } else { DMERR("Unable to parse RAID parameter: %s", key); rs->ti->error = "Unable to parse RAID parameters"; @@ -538,8 +587,22 @@ static int parse_raid_params(struct raid_set *rs, char **argv, if (dm_set_target_max_io_len(rs->ti, max_io_len)) return -EINVAL; - if ((rs->raid_type->level > 1) && - sector_div(sectors_per_dev, (rs->md.raid_disks - rs->raid_type->parity_devs))) { + if (rs->raid_type->level == 10) { + if (raid10_copies > rs->md.raid_disks) { + rs->ti->error = "Not enough devices to satisfy specification"; + return -EINVAL; + } + + /* (Len * #mirrors) / #devices */ + sectors_per_dev = rs->ti->len * raid10_copies; + sector_div(sectors_per_dev, rs->md.raid_disks); + + rs->md.layout = raid10_format_to_md_layout(raid10_format, + raid10_copies); + rs->md.new_layout = rs->md.layout; + } else if ((rs->raid_type->level > 1) && + sector_div(sectors_per_dev, + (rs->md.raid_disks - rs->raid_type->parity_devs))) { rs->ti->error = "Target length not divisible by number of data devices"; return -EINVAL; } @@ -566,6 +629,9 @@ static int raid_is_congested(struct dm_target_callbacks *cb, int bits) if (rs->raid_type->level == 1) return md_raid1_congested(&rs->md, bits); + if (rs->raid_type->level == 10) + return md_raid10_congested(&rs->md, bits); + return md_raid5_congested(&rs->md, bits); } @@ -884,6 +950,9 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs) case 6: redundancy = rs->raid_type->parity_devs; break; + case 10: + redundancy = raid10_md_layout_to_copies(mddev->layout) - 1; + break; default: ti->error = "Unknown RAID type"; return -EINVAL; @@ -1049,12 +1118,19 @@ static int raid_ctr(struct dm_target *ti, unsigned argc, char **argv) goto bad; } + if (ti->len != rs->md.array_sectors) { + ti->error = "Array size does not match requested target length"; + ret = -EINVAL; + goto size_mismatch; + } rs->callbacks.congested_fn = raid_is_congested; dm_table_add_target_callbacks(ti->table, &rs->callbacks); mddev_suspend(&rs->md); return 0; +size_mismatch: + md_stop(&rs->md); bad: context_free(rs); @@ -1203,6 +1279,13 @@ static int raid_status(struct dm_target *ti, status_type_t type, DMEMIT(" region_size %lu", rs->md.bitmap_info.chunksize >> 9); + if (rs->print_flags & DMPF_RAID10_COPIES) + DMEMIT(" raid10_copies %u", + raid10_md_layout_to_copies(rs->md.layout)); + + if (rs->print_flags & DMPF_RAID10_FORMAT) + DMEMIT(" raid10_format near"); + DMEMIT(" %d", rs->md.raid_disks); for (i = 0; i < rs->md.raid_disks; i++) { if (rs->dev[i].meta_dev) @@ -1277,7 +1360,7 @@ static void raid_resume(struct dm_target *ti) static struct target_type raid_target = { .name = "raid", - .version = {1, 2, 0}, + .version = {1, 3, 0}, .module = THIS_MODULE, .ctr = raid_ctr, .dtr = raid_dtr, @@ -1304,6 +1387,8 @@ module_init(dm_raid_init); module_exit(dm_raid_exit); MODULE_DESCRIPTION(DM_NAME " raid4/5/6 target"); +MODULE_ALIAS("dm-raid1"); +MODULE_ALIAS("dm-raid10"); MODULE_ALIAS("dm-raid4"); MODULE_ALIAS("dm-raid5"); MODULE_ALIAS("dm-raid6"); diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index f90069029aaeed02ab6f4f61814afc92d13db2f0..100368eb7991a50c57e473ea20bf4a8441e91ff0 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -1212,6 +1212,41 @@ struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector) return &t->targets[(KEYS_PER_NODE * n) + k]; } +static int count_device(struct dm_target *ti, struct dm_dev *dev, + sector_t start, sector_t len, void *data) +{ + unsigned *num_devices = data; + + (*num_devices)++; + + return 0; +} + +/* + * Check whether a table has no data devices attached using each + * target's iterate_devices method. + * Returns false if the result is unknown because a target doesn't + * support iterate_devices. + */ +bool dm_table_has_no_data_devices(struct dm_table *table) +{ + struct dm_target *uninitialized_var(ti); + unsigned i = 0, num_devices = 0; + + while (i < dm_table_get_num_targets(table)) { + ti = dm_table_get_target(table, i++); + + if (!ti->type->iterate_devices) + return false; + + ti->type->iterate_devices(ti, count_device, &num_devices); + if (num_devices) + return false; + } + + return true; +} + /* * Establish the new table's queue_limits and validate them. */ @@ -1354,17 +1389,25 @@ static int device_is_nonrot(struct dm_target *ti, struct dm_dev *dev, return q && blk_queue_nonrot(q); } -static bool dm_table_is_nonrot(struct dm_table *t) +static int device_is_not_random(struct dm_target *ti, struct dm_dev *dev, + sector_t start, sector_t len, void *data) +{ + struct request_queue *q = bdev_get_queue(dev->bdev); + + return q && !blk_queue_add_random(q); +} + +static bool dm_table_all_devices_attribute(struct dm_table *t, + iterate_devices_callout_fn func) { struct dm_target *ti; unsigned i = 0; - /* Ensure that all underlying device are non-rotational. */ while (i < dm_table_get_num_targets(t)) { ti = dm_table_get_target(t, i++); if (!ti->type->iterate_devices || - !ti->type->iterate_devices(ti, device_is_nonrot, NULL)) + !ti->type->iterate_devices(ti, func, NULL)) return 0; } @@ -1396,13 +1439,23 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, if (!dm_table_discard_zeroes_data(t)) q->limits.discard_zeroes_data = 0; - if (dm_table_is_nonrot(t)) + /* Ensure that all underlying devices are non-rotational. */ + if (dm_table_all_devices_attribute(t, device_is_nonrot)) queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q); else queue_flag_clear_unlocked(QUEUE_FLAG_NONROT, q); dm_table_set_integrity(t); + /* + * Determine whether or not this queue's I/O timings contribute + * to the entropy pool, Only request-based targets use this. + * Clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not + * have it set. + */ + if (blk_queue_add_random(q) && dm_table_all_devices_attribute(t, device_is_not_random)) + queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q); + /* * QUEUE_FLAG_STACKABLE must be set after all queue settings are * visible to other CPUs because, once the flag is set, incoming bios diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index af1fc3b2c2adbb365e247a2d45c1f7a94de9b6dd..c29410af1e2211cbba6029a16128e2fabbf97976 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -509,9 +509,9 @@ enum pool_mode { struct pool_features { enum pool_mode mode; - unsigned zero_new_blocks:1; - unsigned discard_enabled:1; - unsigned discard_passdown:1; + bool zero_new_blocks:1; + bool discard_enabled:1; + bool discard_passdown:1; }; struct thin_c; @@ -580,7 +580,8 @@ struct pool_c { struct dm_target_callbacks callbacks; dm_block_t low_water_blocks; - struct pool_features pf; + struct pool_features requested_pf; /* Features requested during table load */ + struct pool_features adjusted_pf; /* Features used after adjusting for constituent devices */ }; /* @@ -1839,6 +1840,47 @@ static void __requeue_bios(struct pool *pool) /*---------------------------------------------------------------- * Binding of control targets to a pool object *--------------------------------------------------------------*/ +static bool data_dev_supports_discard(struct pool_c *pt) +{ + struct request_queue *q = bdev_get_queue(pt->data_dev->bdev); + + return q && blk_queue_discard(q); +} + +/* + * If discard_passdown was enabled verify that the data device + * supports discards. Disable discard_passdown if not. + */ +static void disable_passdown_if_not_supported(struct pool_c *pt) +{ + struct pool *pool = pt->pool; + struct block_device *data_bdev = pt->data_dev->bdev; + struct queue_limits *data_limits = &bdev_get_queue(data_bdev)->limits; + sector_t block_size = pool->sectors_per_block << SECTOR_SHIFT; + const char *reason = NULL; + char buf[BDEVNAME_SIZE]; + + if (!pt->adjusted_pf.discard_passdown) + return; + + if (!data_dev_supports_discard(pt)) + reason = "discard unsupported"; + + else if (data_limits->max_discard_sectors < pool->sectors_per_block) + reason = "max discard sectors smaller than a block"; + + else if (data_limits->discard_granularity > block_size) + reason = "discard granularity larger than a block"; + + else if (block_size & (data_limits->discard_granularity - 1)) + reason = "discard granularity not a factor of block size"; + + if (reason) { + DMWARN("Data device (%s) %s: Disabling discard passdown.", bdevname(data_bdev, buf), reason); + pt->adjusted_pf.discard_passdown = false; + } +} + static int bind_control_target(struct pool *pool, struct dm_target *ti) { struct pool_c *pt = ti->private; @@ -1847,31 +1889,16 @@ static int bind_control_target(struct pool *pool, struct dm_target *ti) * We want to make sure that degraded pools are never upgraded. */ enum pool_mode old_mode = pool->pf.mode; - enum pool_mode new_mode = pt->pf.mode; + enum pool_mode new_mode = pt->adjusted_pf.mode; if (old_mode > new_mode) new_mode = old_mode; pool->ti = ti; pool->low_water_blocks = pt->low_water_blocks; - pool->pf = pt->pf; - set_pool_mode(pool, new_mode); + pool->pf = pt->adjusted_pf; - /* - * If discard_passdown was enabled verify that the data device - * supports discards. Disable discard_passdown if not; otherwise - * -EOPNOTSUPP will be returned. - */ - /* FIXME: pull this out into a sep fn. */ - if (pt->pf.discard_passdown) { - struct request_queue *q = bdev_get_queue(pt->data_dev->bdev); - if (!q || !blk_queue_discard(q)) { - char buf[BDEVNAME_SIZE]; - DMWARN("Discard unsupported by data device (%s): Disabling discard passdown.", - bdevname(pt->data_dev->bdev, buf)); - pool->pf.discard_passdown = 0; - } - } + set_pool_mode(pool, new_mode); return 0; } @@ -1889,9 +1916,9 @@ static void unbind_control_target(struct pool *pool, struct dm_target *ti) static void pool_features_init(struct pool_features *pf) { pf->mode = PM_WRITE; - pf->zero_new_blocks = 1; - pf->discard_enabled = 1; - pf->discard_passdown = 1; + pf->zero_new_blocks = true; + pf->discard_enabled = true; + pf->discard_passdown = true; } static void __pool_destroy(struct pool *pool) @@ -2119,13 +2146,13 @@ static int parse_pool_features(struct dm_arg_set *as, struct pool_features *pf, argc--; if (!strcasecmp(arg_name, "skip_block_zeroing")) - pf->zero_new_blocks = 0; + pf->zero_new_blocks = false; else if (!strcasecmp(arg_name, "ignore_discard")) - pf->discard_enabled = 0; + pf->discard_enabled = false; else if (!strcasecmp(arg_name, "no_discard_passdown")) - pf->discard_passdown = 0; + pf->discard_passdown = false; else if (!strcasecmp(arg_name, "read_only")) pf->mode = PM_READ_ONLY; @@ -2259,8 +2286,9 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) pt->metadata_dev = metadata_dev; pt->data_dev = data_dev; pt->low_water_blocks = low_water_blocks; - pt->pf = pf; + pt->adjusted_pf = pt->requested_pf = pf; ti->num_flush_requests = 1; + /* * Only need to enable discards if the pool should pass * them down to the data device. The thin device's discard @@ -2268,12 +2296,14 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) */ if (pf.discard_enabled && pf.discard_passdown) { ti->num_discard_requests = 1; + /* * Setting 'discards_supported' circumvents the normal * stacking of discard limits (this keeps the pool and * thin devices' discard limits consistent). */ ti->discards_supported = true; + ti->discard_zeroes_data_unsupported = true; } ti->private = pt; @@ -2703,7 +2733,7 @@ static int pool_status(struct dm_target *ti, status_type_t type, format_dev_t(buf2, pt->data_dev->bdev->bd_dev), (unsigned long)pool->sectors_per_block, (unsigned long long)pt->low_water_blocks); - emit_flags(&pt->pf, result, sz, maxlen); + emit_flags(&pt->requested_pf, result, sz, maxlen); break; } @@ -2732,20 +2762,21 @@ static int pool_merge(struct dm_target *ti, struct bvec_merge_data *bvm, return min(max_size, q->merge_bvec_fn(q, bvm, biovec)); } -static void set_discard_limits(struct pool *pool, struct queue_limits *limits) +static void set_discard_limits(struct pool_c *pt, struct queue_limits *limits) { - /* - * FIXME: these limits may be incompatible with the pool's data device - */ + struct pool *pool = pt->pool; + struct queue_limits *data_limits; + limits->max_discard_sectors = pool->sectors_per_block; /* - * This is just a hint, and not enforced. We have to cope with - * bios that cover a block partially. A discard that spans a block - * boundary is not sent to this target. + * discard_granularity is just a hint, and not enforced. */ - limits->discard_granularity = pool->sectors_per_block << SECTOR_SHIFT; - limits->discard_zeroes_data = pool->pf.zero_new_blocks; + if (pt->adjusted_pf.discard_passdown) { + data_limits = &bdev_get_queue(pt->data_dev->bdev)->limits; + limits->discard_granularity = data_limits->discard_granularity; + } else + limits->discard_granularity = pool->sectors_per_block << SECTOR_SHIFT; } static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits) @@ -2755,15 +2786,25 @@ static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits) blk_limits_io_min(limits, 0); blk_limits_io_opt(limits, pool->sectors_per_block << SECTOR_SHIFT); - if (pool->pf.discard_enabled) - set_discard_limits(pool, limits); + + /* + * pt->adjusted_pf is a staging area for the actual features to use. + * They get transferred to the live pool in bind_control_target() + * called from pool_preresume(). + */ + if (!pt->adjusted_pf.discard_enabled) + return; + + disable_passdown_if_not_supported(pt); + + set_discard_limits(pt, limits); } static struct target_type pool_target = { .name = "thin-pool", .features = DM_TARGET_SINGLETON | DM_TARGET_ALWAYS_WRITEABLE | DM_TARGET_IMMUTABLE, - .version = {1, 3, 0}, + .version = {1, 4, 0}, .module = THIS_MODULE, .ctr = pool_ctr, .dtr = pool_dtr, @@ -3042,19 +3083,19 @@ static int thin_iterate_devices(struct dm_target *ti, return 0; } +/* + * A thin device always inherits its queue limits from its pool. + */ static void thin_io_hints(struct dm_target *ti, struct queue_limits *limits) { struct thin_c *tc = ti->private; - struct pool *pool = tc->pool; - blk_limits_io_min(limits, 0); - blk_limits_io_opt(limits, pool->sectors_per_block << SECTOR_SHIFT); - set_discard_limits(pool, limits); + *limits = bdev_get_queue(tc->pool_dev->bdev)->limits; } static struct target_type thin_target = { .name = "thin", - .version = {1, 3, 0}, + .version = {1, 4, 0}, .module = THIS_MODULE, .ctr = thin_ctr, .dtr = thin_dtr, diff --git a/drivers/md/dm-verity.c b/drivers/md/dm-verity.c index 254d19268ad2fa0c7102014c997b75294450ba42..892ae2766aa6adad52b6d99030a1d8d3bcf2ac38 100644 --- a/drivers/md/dm-verity.c +++ b/drivers/md/dm-verity.c @@ -718,8 +718,8 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv) v->hash_dev_block_bits = ffs(num) - 1; if (sscanf(argv[5], "%llu%c", &num_ll, &dummy) != 1 || - num_ll << (v->data_dev_block_bits - SECTOR_SHIFT) != - (sector_t)num_ll << (v->data_dev_block_bits - SECTOR_SHIFT)) { + (sector_t)(num_ll << (v->data_dev_block_bits - SECTOR_SHIFT)) + >> (v->data_dev_block_bits - SECTOR_SHIFT) != num_ll) { ti->error = "Invalid data blocks"; r = -EINVAL; goto bad; @@ -733,8 +733,8 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv) } if (sscanf(argv[6], "%llu%c", &num_ll, &dummy) != 1 || - num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT) != - (sector_t)num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT)) { + (sector_t)(num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT)) + >> (v->hash_dev_block_bits - SECTOR_SHIFT) != num_ll) { ti->error = "Invalid hash start"; r = -EINVAL; goto bad; diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 4e09b6ff5b493403d4e51be0b4fee2d99643e276..67ffa391edcf1e70a0cc94e7085a1e99abd7a151 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -865,10 +865,14 @@ static void dm_done(struct request *clone, int error, bool mapped) { int r = error; struct dm_rq_target_io *tio = clone->end_io_data; - dm_request_endio_fn rq_end_io = tio->ti->type->rq_end_io; + dm_request_endio_fn rq_end_io = NULL; - if (mapped && rq_end_io) - r = rq_end_io(tio->ti, clone, error, &tio->info); + if (tio->ti) { + rq_end_io = tio->ti->type->rq_end_io; + + if (mapped && rq_end_io) + r = rq_end_io(tio->ti, clone, error, &tio->info); + } if (r <= 0) /* The target wants to complete the I/O */ @@ -1588,15 +1592,6 @@ static int map_request(struct dm_target *ti, struct request *clone, int r, requeued = 0; struct dm_rq_target_io *tio = clone->end_io_data; - /* - * Hold the md reference here for the in-flight I/O. - * We can't rely on the reference count by device opener, - * because the device may be closed during the request completion - * when all bios are completed. - * See the comment in rq_completed() too. - */ - dm_get(md); - tio->ti = ti; r = ti->type->map_rq(ti, clone, &tio->info); switch (r) { @@ -1628,6 +1623,26 @@ static int map_request(struct dm_target *ti, struct request *clone, return requeued; } +static struct request *dm_start_request(struct mapped_device *md, struct request *orig) +{ + struct request *clone; + + blk_start_request(orig); + clone = orig->special; + atomic_inc(&md->pending[rq_data_dir(clone)]); + + /* + * Hold the md reference here for the in-flight I/O. + * We can't rely on the reference count by device opener, + * because the device may be closed during the request completion + * when all bios are completed. + * See the comment in rq_completed() too. + */ + dm_get(md); + + return clone; +} + /* * q->request_fn for request-based dm. * Called with the queue lock held. @@ -1657,14 +1672,21 @@ static void dm_request_fn(struct request_queue *q) pos = blk_rq_pos(rq); ti = dm_table_find_target(map, pos); - BUG_ON(!dm_target_is_valid(ti)); + if (!dm_target_is_valid(ti)) { + /* + * Must perform setup, that dm_done() requires, + * before calling dm_kill_unmapped_request + */ + DMERR_LIMIT("request attempted access beyond the end of device"); + clone = dm_start_request(md, rq); + dm_kill_unmapped_request(clone, -EIO); + continue; + } if (ti->type->busy && ti->type->busy(ti)) goto delay_and_out; - blk_start_request(rq); - clone = rq->special; - atomic_inc(&md->pending[rq_data_dir(clone)]); + clone = dm_start_request(md, rq); spin_unlock(q->queue_lock); if (map_request(ti, clone, md)) @@ -1684,8 +1706,6 @@ static void dm_request_fn(struct request_queue *q) blk_delay_queue(q, HZ / 10); out: dm_table_put(map); - - return; } int dm_underlying_device_busy(struct request_queue *q) @@ -2409,7 +2429,7 @@ static void dm_queue_flush(struct mapped_device *md) */ struct dm_table *dm_swap_table(struct mapped_device *md, struct dm_table *table) { - struct dm_table *map = ERR_PTR(-EINVAL); + struct dm_table *live_map, *map = ERR_PTR(-EINVAL); struct queue_limits limits; int r; @@ -2419,6 +2439,19 @@ struct dm_table *dm_swap_table(struct mapped_device *md, struct dm_table *table) if (!dm_suspended_md(md)) goto out; + /* + * If the new table has no data devices, retain the existing limits. + * This helps multipath with queue_if_no_path if all paths disappear, + * then new I/O is queued based on these limits, and then some paths + * reappear. + */ + if (dm_table_has_no_data_devices(table)) { + live_map = dm_get_live_table(md); + if (live_map) + limits = md->queue->limits; + dm_table_put(live_map); + } + r = dm_calculate_queue_limits(table, &limits); if (r) { map = ERR_PTR(r); diff --git a/drivers/md/dm.h b/drivers/md/dm.h index 52eef493d2669290eaa3f2a22e46717dac9aa1eb..6a99fefaa74306aa6e586c47c3eacf33706556b1 100644 --- a/drivers/md/dm.h +++ b/drivers/md/dm.h @@ -54,6 +54,7 @@ void dm_table_event_callback(struct dm_table *t, void (*fn)(void *), void *context); struct dm_target *dm_table_get_target(struct dm_table *t, unsigned int index); struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector); +bool dm_table_has_no_data_devices(struct dm_table *table); int dm_calculate_queue_limits(struct dm_table *table, struct queue_limits *limits); void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, diff --git a/drivers/md/md.c b/drivers/md/md.c index d5ab4493c8be656ecd28227994d7f7bbe06b8e2d..308e87b417e05a74e4429bac63e1eb2e7af43885 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -498,61 +498,13 @@ void md_flush_request(struct mddev *mddev, struct bio *bio) } EXPORT_SYMBOL(md_flush_request); -/* Support for plugging. - * This mirrors the plugging support in request_queue, but does not - * require having a whole queue or request structures. - * We allocate an md_plug_cb for each md device and each thread it gets - * plugged on. This links tot the private plug_handle structure in the - * personality data where we keep a count of the number of outstanding - * plugs so other code can see if a plug is active. - */ -struct md_plug_cb { - struct blk_plug_cb cb; - struct mddev *mddev; -}; - -static void plugger_unplug(struct blk_plug_cb *cb) -{ - struct md_plug_cb *mdcb = container_of(cb, struct md_plug_cb, cb); - if (atomic_dec_and_test(&mdcb->mddev->plug_cnt)) - md_wakeup_thread(mdcb->mddev->thread); - kfree(mdcb); -} - -/* Check that an unplug wakeup will come shortly. - * If not, wakeup the md thread immediately - */ -int mddev_check_plugged(struct mddev *mddev) +void md_unplug(struct blk_plug_cb *cb, bool from_schedule) { - struct blk_plug *plug = current->plug; - struct md_plug_cb *mdcb; - - if (!plug) - return 0; - - list_for_each_entry(mdcb, &plug->cb_list, cb.list) { - if (mdcb->cb.callback == plugger_unplug && - mdcb->mddev == mddev) { - /* Already on the list, move to top */ - if (mdcb != list_first_entry(&plug->cb_list, - struct md_plug_cb, - cb.list)) - list_move(&mdcb->cb.list, &plug->cb_list); - return 1; - } - } - /* Not currently on the callback list */ - mdcb = kmalloc(sizeof(*mdcb), GFP_ATOMIC); - if (!mdcb) - return 0; - - mdcb->mddev = mddev; - mdcb->cb.callback = plugger_unplug; - atomic_inc(&mddev->plug_cnt); - list_add(&mdcb->cb.list, &plug->cb_list); - return 1; + struct mddev *mddev = cb->data; + md_wakeup_thread(mddev->thread); + kfree(cb); } -EXPORT_SYMBOL_GPL(mddev_check_plugged); +EXPORT_SYMBOL(md_unplug); static inline struct mddev *mddev_get(struct mddev *mddev) { @@ -602,7 +554,6 @@ void mddev_init(struct mddev *mddev) atomic_set(&mddev->active, 1); atomic_set(&mddev->openers, 0); atomic_set(&mddev->active_io, 0); - atomic_set(&mddev->plug_cnt, 0); spin_lock_init(&mddev->write_lock); atomic_set(&mddev->flush_pending, 0); init_waitqueue_head(&mddev->sb_wait); @@ -1157,8 +1108,11 @@ static int super_90_load(struct md_rdev *rdev, struct md_rdev *refdev, int minor ret = 0; } rdev->sectors = rdev->sb_start; - /* Limit to 4TB as metadata cannot record more than that */ - if (rdev->sectors >= (2ULL << 32)) + /* Limit to 4TB as metadata cannot record more than that. + * (not needed for Linear and RAID0 as metadata doesn't + * record this size) + */ + if (rdev->sectors >= (2ULL << 32) && sb->level >= 1) rdev->sectors = (2ULL << 32) - 2; if (rdev->sectors < ((sector_t)sb->size) * 2 && sb->level >= 1) @@ -1449,7 +1403,7 @@ super_90_rdev_size_change(struct md_rdev *rdev, sector_t num_sectors) /* Limit to 4TB as metadata cannot record more than that. * 4TB == 2^32 KB, or 2*2^32 sectors. */ - if (num_sectors >= (2ULL << 32)) + if (num_sectors >= (2ULL << 32) && rdev->mddev->level >= 1) num_sectors = (2ULL << 32) - 2; md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size, rdev->sb_page); @@ -3942,17 +3896,13 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len) break; case clear: /* stopping an active array */ - if (atomic_read(&mddev->openers) > 0) - return -EBUSY; err = do_md_stop(mddev, 0, NULL); break; case inactive: /* stopping an active array */ - if (mddev->pers) { - if (atomic_read(&mddev->openers) > 0) - return -EBUSY; + if (mddev->pers) err = do_md_stop(mddev, 2, NULL); - } else + else err = 0; /* already inactive */ break; case suspended: @@ -7669,6 +7619,8 @@ static int remove_and_add_spares(struct mddev *mddev) } } } + if (removed) + set_bit(MD_CHANGE_DEVS, &mddev->flags); return spares; } @@ -7682,9 +7634,11 @@ static void reap_sync_thread(struct mddev *mddev) !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { /* success...*/ /* activate any spares */ - if (mddev->pers->spare_active(mddev)) + if (mddev->pers->spare_active(mddev)) { sysfs_notify(&mddev->kobj, NULL, "degraded"); + set_bit(MD_CHANGE_DEVS, &mddev->flags); + } } if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && mddev->pers->finish_reshape) diff --git a/drivers/md/md.h b/drivers/md/md.h index 7b4a3c318cae437ecb2041c33b2bdcee2c66bf15..f385b038589d32313014e07af203b8f742bec4a7 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -266,9 +266,6 @@ struct mddev { int new_chunk_sectors; int reshape_backwards; - atomic_t plug_cnt; /* If device is expecting - * more bios soon. - */ struct md_thread *thread; /* management thread */ struct md_thread *sync_thread; /* doing resync or reconstruct */ sector_t curr_resync; /* last block scheduled */ @@ -630,6 +627,12 @@ extern struct bio *bio_clone_mddev(struct bio *bio, gfp_t gfp_mask, struct mddev *mddev); extern struct bio *bio_alloc_mddev(gfp_t gfp_mask, int nr_iovecs, struct mddev *mddev); -extern int mddev_check_plugged(struct mddev *mddev); extern void md_trim_bio(struct bio *bio, int offset, int size); + +extern void md_unplug(struct blk_plug_cb *cb, bool from_schedule); +static inline int mddev_check_plugged(struct mddev *mddev) +{ + return !!blk_check_plugged(md_unplug, mddev, + sizeof(struct blk_plug_cb)); +} #endif /* _MD_MD_H */ diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index cacd008d68644428914b39822417209cd00dddc8..611b5f79761826f8843ede2384c47ccbd0a87be1 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -46,6 +46,20 @@ */ #define NR_RAID1_BIOS 256 +/* when we get a read error on a read-only array, we redirect to another + * device without failing the first device, or trying to over-write to + * correct the read error. To keep track of bad blocks on a per-bio + * level, we store IO_BLOCKED in the appropriate 'bios' pointer + */ +#define IO_BLOCKED ((struct bio *)1) +/* When we successfully write to a known bad-block, we need to remove the + * bad-block marking which must be done from process context. So we record + * the success by setting devs[n].bio to IO_MADE_GOOD + */ +#define IO_MADE_GOOD ((struct bio *)2) + +#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2) + /* When there are this many requests queue to be written by * the raid1 thread, we become 'congested' to provide back-pressure * for writeback. @@ -483,12 +497,14 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect const sector_t this_sector = r1_bio->sector; int sectors; int best_good_sectors; - int start_disk; - int best_disk; - int i; + int best_disk, best_dist_disk, best_pending_disk; + int has_nonrot_disk; + int disk; sector_t best_dist; + unsigned int min_pending; struct md_rdev *rdev; int choose_first; + int choose_next_idle; rcu_read_lock(); /* @@ -499,26 +515,26 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect retry: sectors = r1_bio->sectors; best_disk = -1; + best_dist_disk = -1; best_dist = MaxSector; + best_pending_disk = -1; + min_pending = UINT_MAX; best_good_sectors = 0; + has_nonrot_disk = 0; + choose_next_idle = 0; if (conf->mddev->recovery_cp < MaxSector && - (this_sector + sectors >= conf->next_resync)) { + (this_sector + sectors >= conf->next_resync)) choose_first = 1; - start_disk = 0; - } else { + else choose_first = 0; - start_disk = conf->last_used; - } - for (i = 0 ; i < conf->raid_disks * 2 ; i++) { + for (disk = 0 ; disk < conf->raid_disks * 2 ; disk++) { sector_t dist; sector_t first_bad; int bad_sectors; - - int disk = start_disk + i; - if (disk >= conf->raid_disks * 2) - disk -= conf->raid_disks * 2; + unsigned int pending; + bool nonrot; rdev = rcu_dereference(conf->mirrors[disk].rdev); if (r1_bio->bios[disk] == IO_BLOCKED @@ -577,22 +593,77 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect } else best_good_sectors = sectors; + nonrot = blk_queue_nonrot(bdev_get_queue(rdev->bdev)); + has_nonrot_disk |= nonrot; + pending = atomic_read(&rdev->nr_pending); dist = abs(this_sector - conf->mirrors[disk].head_position); - if (choose_first - /* Don't change to another disk for sequential reads */ - || conf->next_seq_sect == this_sector - || dist == 0 - /* If device is idle, use it */ - || atomic_read(&rdev->nr_pending) == 0) { + if (choose_first) { + best_disk = disk; + break; + } + /* Don't change to another disk for sequential reads */ + if (conf->mirrors[disk].next_seq_sect == this_sector + || dist == 0) { + int opt_iosize = bdev_io_opt(rdev->bdev) >> 9; + struct raid1_info *mirror = &conf->mirrors[disk]; + + best_disk = disk; + /* + * If buffered sequential IO size exceeds optimal + * iosize, check if there is idle disk. If yes, choose + * the idle disk. read_balance could already choose an + * idle disk before noticing it's a sequential IO in + * this disk. This doesn't matter because this disk + * will idle, next time it will be utilized after the + * first disk has IO size exceeds optimal iosize. In + * this way, iosize of the first disk will be optimal + * iosize at least. iosize of the second disk might be + * small, but not a big deal since when the second disk + * starts IO, the first disk is likely still busy. + */ + if (nonrot && opt_iosize > 0 && + mirror->seq_start != MaxSector && + mirror->next_seq_sect > opt_iosize && + mirror->next_seq_sect - opt_iosize >= + mirror->seq_start) { + choose_next_idle = 1; + continue; + } + break; + } + /* If device is idle, use it */ + if (pending == 0) { best_disk = disk; break; } + + if (choose_next_idle) + continue; + + if (min_pending > pending) { + min_pending = pending; + best_pending_disk = disk; + } + if (dist < best_dist) { best_dist = dist; - best_disk = disk; + best_dist_disk = disk; } } + /* + * If all disks are rotational, choose the closest disk. If any disk is + * non-rotational, choose the disk with less pending request even the + * disk is rotational, which might/might not be optimal for raids with + * mixed ratation/non-rotational disks depending on workload. + */ + if (best_disk == -1) { + if (has_nonrot_disk) + best_disk = best_pending_disk; + else + best_disk = best_dist_disk; + } + if (best_disk >= 0) { rdev = rcu_dereference(conf->mirrors[best_disk].rdev); if (!rdev) @@ -606,8 +677,11 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect goto retry; } sectors = best_good_sectors; - conf->next_seq_sect = this_sector + sectors; - conf->last_used = best_disk; + + if (conf->mirrors[best_disk].next_seq_sect != this_sector) + conf->mirrors[best_disk].seq_start = this_sector; + + conf->mirrors[best_disk].next_seq_sect = this_sector + sectors; } rcu_read_unlock(); *max_sectors = sectors; @@ -870,10 +944,48 @@ static void alloc_behind_pages(struct bio *bio, struct r1bio *r1_bio) pr_debug("%dB behind alloc failed, doing sync I/O\n", bio->bi_size); } +struct raid1_plug_cb { + struct blk_plug_cb cb; + struct bio_list pending; + int pending_cnt; +}; + +static void raid1_unplug(struct blk_plug_cb *cb, bool from_schedule) +{ + struct raid1_plug_cb *plug = container_of(cb, struct raid1_plug_cb, + cb); + struct mddev *mddev = plug->cb.data; + struct r1conf *conf = mddev->private; + struct bio *bio; + + if (from_schedule) { + spin_lock_irq(&conf->device_lock); + bio_list_merge(&conf->pending_bio_list, &plug->pending); + conf->pending_count += plug->pending_cnt; + spin_unlock_irq(&conf->device_lock); + md_wakeup_thread(mddev->thread); + kfree(plug); + return; + } + + /* we aren't scheduling, so we can do the write-out directly. */ + bio = bio_list_get(&plug->pending); + bitmap_unplug(mddev->bitmap); + wake_up(&conf->wait_barrier); + + while (bio) { /* submit pending writes */ + struct bio *next = bio->bi_next; + bio->bi_next = NULL; + generic_make_request(bio); + bio = next; + } + kfree(plug); +} + static void make_request(struct mddev *mddev, struct bio * bio) { struct r1conf *conf = mddev->private; - struct mirror_info *mirror; + struct raid1_info *mirror; struct r1bio *r1_bio; struct bio *read_bio; int i, disks; @@ -883,6 +995,8 @@ static void make_request(struct mddev *mddev, struct bio * bio) const unsigned long do_sync = (bio->bi_rw & REQ_SYNC); const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA)); struct md_rdev *blocked_rdev; + struct blk_plug_cb *cb; + struct raid1_plug_cb *plug = NULL; int first_clone; int sectors_handled; int max_sectors; @@ -1185,11 +1299,22 @@ static void make_request(struct mddev *mddev, struct bio * bio) mbio->bi_private = r1_bio; atomic_inc(&r1_bio->remaining); + + cb = blk_check_plugged(raid1_unplug, mddev, sizeof(*plug)); + if (cb) + plug = container_of(cb, struct raid1_plug_cb, cb); + else + plug = NULL; spin_lock_irqsave(&conf->device_lock, flags); - bio_list_add(&conf->pending_bio_list, mbio); - conf->pending_count++; + if (plug) { + bio_list_add(&plug->pending, mbio); + plug->pending_cnt++; + } else { + bio_list_add(&conf->pending_bio_list, mbio); + conf->pending_count++; + } spin_unlock_irqrestore(&conf->device_lock, flags); - if (!mddev_check_plugged(mddev)) + if (!plug) md_wakeup_thread(mddev->thread); } /* Mustn't call r1_bio_write_done before this next test, @@ -1364,7 +1489,7 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev) struct r1conf *conf = mddev->private; int err = -EEXIST; int mirror = 0; - struct mirror_info *p; + struct raid1_info *p; int first = 0; int last = conf->raid_disks - 1; struct request_queue *q = bdev_get_queue(rdev->bdev); @@ -1433,7 +1558,7 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev) struct r1conf *conf = mddev->private; int err = 0; int number = rdev->raid_disk; - struct mirror_info *p = conf->mirrors+ number; + struct raid1_info *p = conf->mirrors + number; if (rdev != p->rdev) p = conf->mirrors + conf->raid_disks + number; @@ -2173,8 +2298,7 @@ static void raid1d(struct mddev *mddev) blk_start_plug(&plug); for (;;) { - if (atomic_read(&mddev->plug_cnt) == 0) - flush_pending_writes(conf); + flush_pending_writes(conf); spin_lock_irqsave(&conf->device_lock, flags); if (list_empty(head)) { @@ -2371,6 +2495,18 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr, int *skipp bio->bi_rw = READ; bio->bi_end_io = end_sync_read; read_targets++; + } else if (!test_bit(WriteErrorSeen, &rdev->flags) && + test_bit(MD_RECOVERY_SYNC, &mddev->recovery) && + !test_bit(MD_RECOVERY_CHECK, &mddev->recovery)) { + /* + * The device is suitable for reading (InSync), + * but has bad block(s) here. Let's try to correct them, + * if we are doing resync or repair. Otherwise, leave + * this device alone for this sync request. + */ + bio->bi_rw = WRITE; + bio->bi_end_io = end_sync_write; + write_targets++; } } if (bio->bi_end_io) { @@ -2428,7 +2564,10 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr, int *skipp /* There is nowhere to write, so all non-sync * drives must be failed - so we are finished */ - sector_t rv = max_sector - sector_nr; + sector_t rv; + if (min_bad > 0) + max_sector = sector_nr + min_bad; + rv = max_sector - sector_nr; *skipped = 1; put_buf(r1_bio); return rv; @@ -2521,7 +2660,7 @@ static struct r1conf *setup_conf(struct mddev *mddev) { struct r1conf *conf; int i; - struct mirror_info *disk; + struct raid1_info *disk; struct md_rdev *rdev; int err = -ENOMEM; @@ -2529,7 +2668,7 @@ static struct r1conf *setup_conf(struct mddev *mddev) if (!conf) goto abort; - conf->mirrors = kzalloc(sizeof(struct mirror_info) + conf->mirrors = kzalloc(sizeof(struct raid1_info) * mddev->raid_disks * 2, GFP_KERNEL); if (!conf->mirrors) @@ -2572,6 +2711,7 @@ static struct r1conf *setup_conf(struct mddev *mddev) mddev->merge_check_needed = 1; disk->head_position = 0; + disk->seq_start = MaxSector; } conf->raid_disks = mddev->raid_disks; conf->mddev = mddev; @@ -2585,7 +2725,6 @@ static struct r1conf *setup_conf(struct mddev *mddev) conf->recovery_disabled = mddev->recovery_disabled - 1; err = -EIO; - conf->last_used = -1; for (i = 0; i < conf->raid_disks * 2; i++) { disk = conf->mirrors + i; @@ -2611,19 +2750,9 @@ static struct r1conf *setup_conf(struct mddev *mddev) if (disk->rdev && (disk->rdev->saved_raid_disk < 0)) conf->fullsync = 1; - } else if (conf->last_used < 0) - /* - * The first working device is used as a - * starting point to read balancing. - */ - conf->last_used = i; + } } - if (conf->last_used < 0) { - printk(KERN_ERR "md/raid1:%s: no operational mirrors\n", - mdname(mddev)); - goto abort; - } err = -ENOMEM; conf->thread = md_register_thread(raid1d, mddev, "raid1"); if (!conf->thread) { @@ -2798,7 +2927,7 @@ static int raid1_reshape(struct mddev *mddev) */ mempool_t *newpool, *oldpool; struct pool_info *newpoolinfo; - struct mirror_info *newmirrors; + struct raid1_info *newmirrors; struct r1conf *conf = mddev->private; int cnt, raid_disks; unsigned long flags; @@ -2841,7 +2970,7 @@ static int raid1_reshape(struct mddev *mddev) kfree(newpoolinfo); return -ENOMEM; } - newmirrors = kzalloc(sizeof(struct mirror_info) * raid_disks * 2, + newmirrors = kzalloc(sizeof(struct raid1_info) * raid_disks * 2, GFP_KERNEL); if (!newmirrors) { kfree(newpoolinfo); @@ -2880,7 +3009,6 @@ static int raid1_reshape(struct mddev *mddev) conf->raid_disks = mddev->raid_disks = raid_disks; mddev->delta_disks = 0; - conf->last_used = 0; /* just make sure it is in-range */ lower_barrier(conf); set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h index 80ded139314cf8a649729ce8e22915ca11bbd17f..0ff3715fb7eba5ec4fed61a9922276b07b363aff 100644 --- a/drivers/md/raid1.h +++ b/drivers/md/raid1.h @@ -1,9 +1,15 @@ #ifndef _RAID1_H #define _RAID1_H -struct mirror_info { +struct raid1_info { struct md_rdev *rdev; sector_t head_position; + + /* When choose the best device for a read (read_balance()) + * we try to keep sequential reads one the same device + */ + sector_t next_seq_sect; + sector_t seq_start; }; /* @@ -24,17 +30,11 @@ struct pool_info { struct r1conf { struct mddev *mddev; - struct mirror_info *mirrors; /* twice 'raid_disks' to + struct raid1_info *mirrors; /* twice 'raid_disks' to * allow for replacements. */ int raid_disks; - /* When choose the best device for a read (read_balance()) - * we try to keep sequential reads one the same device - * using 'last_used' and 'next_seq_sect' - */ - int last_used; - sector_t next_seq_sect; /* During resync, read_balancing is only allowed on the part * of the array that has been resynced. 'next_resync' tells us * where that is. @@ -135,20 +135,6 @@ struct r1bio { /* DO NOT PUT ANY NEW FIELDS HERE - bios array is contiguously alloced*/ }; -/* when we get a read error on a read-only array, we redirect to another - * device without failing the first device, or trying to over-write to - * correct the read error. To keep track of bad blocks on a per-bio - * level, we store IO_BLOCKED in the appropriate 'bios' pointer - */ -#define IO_BLOCKED ((struct bio *)1) -/* When we successfully write to a known bad-block, we need to remove the - * bad-block marking which must be done from process context. So we record - * the success by setting bios[n] to IO_MADE_GOOD - */ -#define IO_MADE_GOOD ((struct bio *)2) - -#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2) - /* bits for r1bio.state */ #define R1BIO_Uptodate 0 #define R1BIO_IsSync 1 diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 8da6282254c3e822a27702c469b9afce720bda43..0138a727c1f3c220bc91a02c9bdf720599465eb9 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -60,7 +60,21 @@ */ #define NR_RAID10_BIOS 256 -/* When there are this many requests queue to be written by +/* when we get a read error on a read-only array, we redirect to another + * device without failing the first device, or trying to over-write to + * correct the read error. To keep track of bad blocks on a per-bio + * level, we store IO_BLOCKED in the appropriate 'bios' pointer + */ +#define IO_BLOCKED ((struct bio *)1) +/* When we successfully write to a known bad-block, we need to remove the + * bad-block marking which must be done from process context. So we record + * the success by setting devs[n].bio to IO_MADE_GOOD + */ +#define IO_MADE_GOOD ((struct bio *)2) + +#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2) + +/* When there are this many requests queued to be written by * the raid10 thread, we become 'congested' to provide back-pressure * for writeback. */ @@ -645,7 +659,11 @@ static int raid10_mergeable_bvec(struct request_queue *q, max = biovec->bv_len; if (mddev->merge_check_needed) { - struct r10bio r10_bio; + struct { + struct r10bio r10_bio; + struct r10dev devs[conf->copies]; + } on_stack; + struct r10bio *r10_bio = &on_stack.r10_bio; int s; if (conf->reshape_progress != MaxSector) { /* Cannot give any guidance during reshape */ @@ -653,18 +671,18 @@ static int raid10_mergeable_bvec(struct request_queue *q, return biovec->bv_len; return 0; } - r10_bio.sector = sector; - raid10_find_phys(conf, &r10_bio); + r10_bio->sector = sector; + raid10_find_phys(conf, r10_bio); rcu_read_lock(); for (s = 0; s < conf->copies; s++) { - int disk = r10_bio.devs[s].devnum; + int disk = r10_bio->devs[s].devnum; struct md_rdev *rdev = rcu_dereference( conf->mirrors[disk].rdev); if (rdev && !test_bit(Faulty, &rdev->flags)) { struct request_queue *q = bdev_get_queue(rdev->bdev); if (q->merge_bvec_fn) { - bvm->bi_sector = r10_bio.devs[s].addr + bvm->bi_sector = r10_bio->devs[s].addr + rdev->data_offset; bvm->bi_bdev = rdev->bdev; max = min(max, q->merge_bvec_fn( @@ -676,7 +694,7 @@ static int raid10_mergeable_bvec(struct request_queue *q, struct request_queue *q = bdev_get_queue(rdev->bdev); if (q->merge_bvec_fn) { - bvm->bi_sector = r10_bio.devs[s].addr + bvm->bi_sector = r10_bio->devs[s].addr + rdev->data_offset; bvm->bi_bdev = rdev->bdev; max = min(max, q->merge_bvec_fn( @@ -717,7 +735,7 @@ static struct md_rdev *read_balance(struct r10conf *conf, int sectors = r10_bio->sectors; int best_good_sectors; sector_t new_distance, best_dist; - struct md_rdev *rdev, *best_rdev; + struct md_rdev *best_rdev, *rdev = NULL; int do_balance; int best_slot; struct geom *geo = &conf->geo; @@ -839,9 +857,8 @@ static struct md_rdev *read_balance(struct r10conf *conf, return rdev; } -static int raid10_congested(void *data, int bits) +int md_raid10_congested(struct mddev *mddev, int bits) { - struct mddev *mddev = data; struct r10conf *conf = mddev->private; int i, ret = 0; @@ -849,8 +866,6 @@ static int raid10_congested(void *data, int bits) conf->pending_count >= max_queued_requests) return 1; - if (mddev_congested(mddev, bits)) - return 1; rcu_read_lock(); for (i = 0; (i < conf->geo.raid_disks || i < conf->prev.raid_disks) @@ -866,6 +881,15 @@ static int raid10_congested(void *data, int bits) rcu_read_unlock(); return ret; } +EXPORT_SYMBOL_GPL(md_raid10_congested); + +static int raid10_congested(void *data, int bits) +{ + struct mddev *mddev = data; + + return mddev_congested(mddev, bits) || + md_raid10_congested(mddev, bits); +} static void flush_pending_writes(struct r10conf *conf) { @@ -1488,14 +1512,16 @@ static int _enough(struct r10conf *conf, struct geom *geo, int ignore) do { int n = conf->copies; int cnt = 0; + int this = first; while (n--) { - if (conf->mirrors[first].rdev && - first != ignore) + if (conf->mirrors[this].rdev && + this != ignore) cnt++; - first = (first+1) % geo->raid_disks; + this = (this+1) % geo->raid_disks; } if (cnt == 0) return 0; + first = (first + geo->near_copies) % geo->raid_disks; } while (first != 0); return 1; } @@ -1546,7 +1572,7 @@ static void error(struct mddev *mddev, struct md_rdev *rdev) static void print_conf(struct r10conf *conf) { int i; - struct mirror_info *tmp; + struct raid10_info *tmp; printk(KERN_DEBUG "RAID10 conf printout:\n"); if (!conf) { @@ -1580,7 +1606,7 @@ static int raid10_spare_active(struct mddev *mddev) { int i; struct r10conf *conf = mddev->private; - struct mirror_info *tmp; + struct raid10_info *tmp; int count = 0; unsigned long flags; @@ -1655,7 +1681,7 @@ static int raid10_add_disk(struct mddev *mddev, struct md_rdev *rdev) else mirror = first; for ( ; mirror <= last ; mirror++) { - struct mirror_info *p = &conf->mirrors[mirror]; + struct raid10_info *p = &conf->mirrors[mirror]; if (p->recovery_disabled == mddev->recovery_disabled) continue; if (p->rdev) { @@ -1709,7 +1735,7 @@ static int raid10_remove_disk(struct mddev *mddev, struct md_rdev *rdev) int err = 0; int number = rdev->raid_disk; struct md_rdev **rdevp; - struct mirror_info *p = conf->mirrors + number; + struct raid10_info *p = conf->mirrors + number; print_conf(conf); if (rdev == p->rdev) @@ -2660,8 +2686,7 @@ static void raid10d(struct mddev *mddev) blk_start_plug(&plug); for (;;) { - if (atomic_read(&mddev->plug_cnt) == 0) - flush_pending_writes(conf); + flush_pending_writes(conf); spin_lock_irqsave(&conf->device_lock, flags); if (list_empty(head)) { @@ -2876,7 +2901,7 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr, sector_t sect; int must_sync; int any_working; - struct mirror_info *mirror = &conf->mirrors[i]; + struct raid10_info *mirror = &conf->mirrors[i]; if ((mirror->rdev == NULL || test_bit(In_sync, &mirror->rdev->flags)) @@ -3388,7 +3413,7 @@ static struct r10conf *setup_conf(struct mddev *mddev) goto out; /* FIXME calc properly */ - conf->mirrors = kzalloc(sizeof(struct mirror_info)*(mddev->raid_disks + + conf->mirrors = kzalloc(sizeof(struct raid10_info)*(mddev->raid_disks + max(0,mddev->delta_disks)), GFP_KERNEL); if (!conf->mirrors) @@ -3452,7 +3477,7 @@ static int run(struct mddev *mddev) { struct r10conf *conf; int i, disk_idx, chunk_size; - struct mirror_info *disk; + struct raid10_info *disk; struct md_rdev *rdev; sector_t size; sector_t min_offset_diff = 0; @@ -3472,12 +3497,14 @@ static int run(struct mddev *mddev) conf->thread = NULL; chunk_size = mddev->chunk_sectors << 9; - blk_queue_io_min(mddev->queue, chunk_size); - if (conf->geo.raid_disks % conf->geo.near_copies) - blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks); - else - blk_queue_io_opt(mddev->queue, chunk_size * - (conf->geo.raid_disks / conf->geo.near_copies)); + if (mddev->queue) { + blk_queue_io_min(mddev->queue, chunk_size); + if (conf->geo.raid_disks % conf->geo.near_copies) + blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks); + else + blk_queue_io_opt(mddev->queue, chunk_size * + (conf->geo.raid_disks / conf->geo.near_copies)); + } rdev_for_each(rdev, mddev) { long long diff; @@ -3511,8 +3538,9 @@ static int run(struct mddev *mddev) if (first || diff < min_offset_diff) min_offset_diff = diff; - disk_stack_limits(mddev->gendisk, rdev->bdev, - rdev->data_offset << 9); + if (mddev->gendisk) + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); disk->head_position = 0; } @@ -3575,22 +3603,22 @@ static int run(struct mddev *mddev) md_set_array_sectors(mddev, size); mddev->resync_max_sectors = size; - mddev->queue->backing_dev_info.congested_fn = raid10_congested; - mddev->queue->backing_dev_info.congested_data = mddev; - - /* Calculate max read-ahead size. - * We need to readahead at least twice a whole stripe.... - * maybe... - */ - { + if (mddev->queue) { int stripe = conf->geo.raid_disks * ((mddev->chunk_sectors << 9) / PAGE_SIZE); + mddev->queue->backing_dev_info.congested_fn = raid10_congested; + mddev->queue->backing_dev_info.congested_data = mddev; + + /* Calculate max read-ahead size. + * We need to readahead at least twice a whole stripe.... + * maybe... + */ stripe /= conf->geo.near_copies; if (mddev->queue->backing_dev_info.ra_pages < 2 * stripe) mddev->queue->backing_dev_info.ra_pages = 2 * stripe; + blk_queue_merge_bvec(mddev->queue, raid10_mergeable_bvec); } - blk_queue_merge_bvec(mddev->queue, raid10_mergeable_bvec); if (md_integrity_register(mddev)) goto out_free_conf; @@ -3641,7 +3669,10 @@ static int stop(struct mddev *mddev) lower_barrier(conf); md_unregister_thread(&mddev->thread); - blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/ + if (mddev->queue) + /* the unplug fn references 'conf'*/ + blk_sync_queue(mddev->queue); + if (conf->r10bio_pool) mempool_destroy(conf->r10bio_pool); kfree(conf->mirrors); @@ -3805,7 +3836,7 @@ static int raid10_check_reshape(struct mddev *mddev) if (mddev->delta_disks > 0) { /* allocate new 'mirrors' list */ conf->mirrors_new = kzalloc( - sizeof(struct mirror_info) + sizeof(struct raid10_info) *(mddev->raid_disks + mddev->delta_disks), GFP_KERNEL); @@ -3930,7 +3961,7 @@ static int raid10_start_reshape(struct mddev *mddev) spin_lock_irq(&conf->device_lock); if (conf->mirrors_new) { memcpy(conf->mirrors_new, conf->mirrors, - sizeof(struct mirror_info)*conf->prev.raid_disks); + sizeof(struct raid10_info)*conf->prev.raid_disks); smp_mb(); kfree(conf->mirrors_old); /* FIXME and elsewhere */ conf->mirrors_old = conf->mirrors; @@ -4389,14 +4420,18 @@ static int handle_reshape_read_error(struct mddev *mddev, { /* Use sync reads to get the blocks from somewhere else */ int sectors = r10_bio->sectors; - struct r10bio r10b; struct r10conf *conf = mddev->private; + struct { + struct r10bio r10_bio; + struct r10dev devs[conf->copies]; + } on_stack; + struct r10bio *r10b = &on_stack.r10_bio; int slot = 0; int idx = 0; struct bio_vec *bvec = r10_bio->master_bio->bi_io_vec; - r10b.sector = r10_bio->sector; - __raid10_find_phys(&conf->prev, &r10b); + r10b->sector = r10_bio->sector; + __raid10_find_phys(&conf->prev, r10b); while (sectors) { int s = sectors; @@ -4407,7 +4442,7 @@ static int handle_reshape_read_error(struct mddev *mddev, s = PAGE_SIZE >> 9; while (!success) { - int d = r10b.devs[slot].devnum; + int d = r10b->devs[slot].devnum; struct md_rdev *rdev = conf->mirrors[d].rdev; sector_t addr; if (rdev == NULL || @@ -4415,7 +4450,7 @@ static int handle_reshape_read_error(struct mddev *mddev, !test_bit(In_sync, &rdev->flags)) goto failed; - addr = r10b.devs[slot].addr + idx * PAGE_SIZE; + addr = r10b->devs[slot].addr + idx * PAGE_SIZE; success = sync_page_io(rdev, addr, s << 9, diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h index 135b1b0a155438624b56ebadf42d8971463adc6a..1054cf602345250f059ef81fae8bf9ef330cccd1 100644 --- a/drivers/md/raid10.h +++ b/drivers/md/raid10.h @@ -1,7 +1,7 @@ #ifndef _RAID10_H #define _RAID10_H -struct mirror_info { +struct raid10_info { struct md_rdev *rdev, *replacement; sector_t head_position; int recovery_disabled; /* matches @@ -13,8 +13,8 @@ struct mirror_info { struct r10conf { struct mddev *mddev; - struct mirror_info *mirrors; - struct mirror_info *mirrors_new, *mirrors_old; + struct raid10_info *mirrors; + struct raid10_info *mirrors_new, *mirrors_old; spinlock_t device_lock; /* geometry */ @@ -110,7 +110,7 @@ struct r10bio { * We choose the number when they are allocated. * We sometimes need an extra bio to write to the replacement. */ - struct { + struct r10dev { struct bio *bio; union { struct bio *repl_bio; /* used for resync and @@ -123,20 +123,6 @@ struct r10bio { } devs[0]; }; -/* when we get a read error on a read-only array, we redirect to another - * device without failing the first device, or trying to over-write to - * correct the read error. To keep track of bad blocks on a per-bio - * level, we store IO_BLOCKED in the appropriate 'bios' pointer - */ -#define IO_BLOCKED ((struct bio*)1) -/* When we successfully write to a known bad-block, we need to remove the - * bad-block marking which must be done from process context. So we record - * the success by setting devs[n].bio to IO_MADE_GOOD - */ -#define IO_MADE_GOOD ((struct bio *)2) - -#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2) - /* bits for r10bio.state */ enum r10bio_state { R10BIO_Uptodate, @@ -159,4 +145,7 @@ enum r10bio_state { */ R10BIO_Previous, }; + +extern int md_raid10_congested(struct mddev *mddev, int bits); + #endif diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 04348d76bb30fa8831964ea980ec2df912a45f92..0689173fd9f568583708c53396631ac8e1838c55 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -99,34 +99,40 @@ static inline struct bio *r5_next_bio(struct bio *bio, sector_t sector) * We maintain a biased count of active stripes in the bottom 16 bits of * bi_phys_segments, and a count of processed stripes in the upper 16 bits */ -static inline int raid5_bi_phys_segments(struct bio *bio) +static inline int raid5_bi_processed_stripes(struct bio *bio) { - return bio->bi_phys_segments & 0xffff; + atomic_t *segments = (atomic_t *)&bio->bi_phys_segments; + return (atomic_read(segments) >> 16) & 0xffff; } -static inline int raid5_bi_hw_segments(struct bio *bio) +static inline int raid5_dec_bi_active_stripes(struct bio *bio) { - return (bio->bi_phys_segments >> 16) & 0xffff; + atomic_t *segments = (atomic_t *)&bio->bi_phys_segments; + return atomic_sub_return(1, segments) & 0xffff; } -static inline int raid5_dec_bi_phys_segments(struct bio *bio) +static inline void raid5_inc_bi_active_stripes(struct bio *bio) { - --bio->bi_phys_segments; - return raid5_bi_phys_segments(bio); + atomic_t *segments = (atomic_t *)&bio->bi_phys_segments; + atomic_inc(segments); } -static inline int raid5_dec_bi_hw_segments(struct bio *bio) +static inline void raid5_set_bi_processed_stripes(struct bio *bio, + unsigned int cnt) { - unsigned short val = raid5_bi_hw_segments(bio); + atomic_t *segments = (atomic_t *)&bio->bi_phys_segments; + int old, new; - --val; - bio->bi_phys_segments = (val << 16) | raid5_bi_phys_segments(bio); - return val; + do { + old = atomic_read(segments); + new = (old & 0xffff) | (cnt << 16); + } while (atomic_cmpxchg(segments, old, new) != old); } -static inline void raid5_set_bi_hw_segments(struct bio *bio, unsigned int cnt) +static inline void raid5_set_bi_stripes(struct bio *bio, unsigned int cnt) { - bio->bi_phys_segments = raid5_bi_phys_segments(bio) | (cnt << 16); + atomic_t *segments = (atomic_t *)&bio->bi_phys_segments; + atomic_set(segments, cnt); } /* Find first data disk in a raid6 stripe */ @@ -190,49 +196,56 @@ static int stripe_operations_active(struct stripe_head *sh) test_bit(STRIPE_COMPUTE_RUN, &sh->state); } -static void __release_stripe(struct r5conf *conf, struct stripe_head *sh) +static void do_release_stripe(struct r5conf *conf, struct stripe_head *sh) { - if (atomic_dec_and_test(&sh->count)) { - BUG_ON(!list_empty(&sh->lru)); - BUG_ON(atomic_read(&conf->active_stripes)==0); - if (test_bit(STRIPE_HANDLE, &sh->state)) { - if (test_bit(STRIPE_DELAYED, &sh->state) && - !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) - list_add_tail(&sh->lru, &conf->delayed_list); - else if (test_bit(STRIPE_BIT_DELAY, &sh->state) && - sh->bm_seq - conf->seq_write > 0) - list_add_tail(&sh->lru, &conf->bitmap_list); - else { - clear_bit(STRIPE_DELAYED, &sh->state); - clear_bit(STRIPE_BIT_DELAY, &sh->state); - list_add_tail(&sh->lru, &conf->handle_list); - } - md_wakeup_thread(conf->mddev->thread); - } else { - BUG_ON(stripe_operations_active(sh)); - if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) - if (atomic_dec_return(&conf->preread_active_stripes) - < IO_THRESHOLD) - md_wakeup_thread(conf->mddev->thread); - atomic_dec(&conf->active_stripes); - if (!test_bit(STRIPE_EXPANDING, &sh->state)) { - list_add_tail(&sh->lru, &conf->inactive_list); - wake_up(&conf->wait_for_stripe); - if (conf->retry_read_aligned) - md_wakeup_thread(conf->mddev->thread); - } + BUG_ON(!list_empty(&sh->lru)); + BUG_ON(atomic_read(&conf->active_stripes)==0); + if (test_bit(STRIPE_HANDLE, &sh->state)) { + if (test_bit(STRIPE_DELAYED, &sh->state) && + !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) + list_add_tail(&sh->lru, &conf->delayed_list); + else if (test_bit(STRIPE_BIT_DELAY, &sh->state) && + sh->bm_seq - conf->seq_write > 0) + list_add_tail(&sh->lru, &conf->bitmap_list); + else { + clear_bit(STRIPE_DELAYED, &sh->state); + clear_bit(STRIPE_BIT_DELAY, &sh->state); + list_add_tail(&sh->lru, &conf->handle_list); + } + md_wakeup_thread(conf->mddev->thread); + } else { + BUG_ON(stripe_operations_active(sh)); + if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) + if (atomic_dec_return(&conf->preread_active_stripes) + < IO_THRESHOLD) + md_wakeup_thread(conf->mddev->thread); + atomic_dec(&conf->active_stripes); + if (!test_bit(STRIPE_EXPANDING, &sh->state)) { + list_add_tail(&sh->lru, &conf->inactive_list); + wake_up(&conf->wait_for_stripe); + if (conf->retry_read_aligned) + md_wakeup_thread(conf->mddev->thread); } } } +static void __release_stripe(struct r5conf *conf, struct stripe_head *sh) +{ + if (atomic_dec_and_test(&sh->count)) + do_release_stripe(conf, sh); +} + static void release_stripe(struct stripe_head *sh) { struct r5conf *conf = sh->raid_conf; unsigned long flags; - spin_lock_irqsave(&conf->device_lock, flags); - __release_stripe(conf, sh); - spin_unlock_irqrestore(&conf->device_lock, flags); + local_irq_save(flags); + if (atomic_dec_and_lock(&sh->count, &conf->device_lock)) { + do_release_stripe(conf, sh); + spin_unlock(&conf->device_lock); + } + local_irq_restore(flags); } static inline void remove_hash(struct stripe_head *sh) @@ -380,6 +393,8 @@ static int calc_degraded(struct r5conf *conf) degraded = 0; for (i = 0; i < conf->previous_raid_disks; i++) { struct md_rdev *rdev = rcu_dereference(conf->disks[i].rdev); + if (rdev && test_bit(Faulty, &rdev->flags)) + rdev = rcu_dereference(conf->disks[i].replacement); if (!rdev || test_bit(Faulty, &rdev->flags)) degraded++; else if (test_bit(In_sync, &rdev->flags)) @@ -404,6 +419,8 @@ static int calc_degraded(struct r5conf *conf) degraded2 = 0; for (i = 0; i < conf->raid_disks; i++) { struct md_rdev *rdev = rcu_dereference(conf->disks[i].rdev); + if (rdev && test_bit(Faulty, &rdev->flags)) + rdev = rcu_dereference(conf->disks[i].replacement); if (!rdev || test_bit(Faulty, &rdev->flags)) degraded2++; else if (test_bit(In_sync, &rdev->flags)) @@ -471,7 +488,8 @@ get_active_stripe(struct r5conf *conf, sector_t sector, } else { if (atomic_read(&sh->count)) { BUG_ON(!list_empty(&sh->lru) - && !test_bit(STRIPE_EXPANDING, &sh->state)); + && !test_bit(STRIPE_EXPANDING, &sh->state) + && !test_bit(STRIPE_ON_UNPLUG_LIST, &sh->state)); } else { if (!test_bit(STRIPE_HANDLE, &sh->state)) atomic_inc(&conf->active_stripes); @@ -640,6 +658,9 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) else bi->bi_sector = (sh->sector + rdev->data_offset); + if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) + bi->bi_rw |= REQ_FLUSH; + bi->bi_flags = 1 << BIO_UPTODATE; bi->bi_idx = 0; bi->bi_io_vec[0].bv_len = STRIPE_SIZE; @@ -749,14 +770,12 @@ static void ops_complete_biofill(void *stripe_head_ref) { struct stripe_head *sh = stripe_head_ref; struct bio *return_bi = NULL; - struct r5conf *conf = sh->raid_conf; int i; pr_debug("%s: stripe %llu\n", __func__, (unsigned long long)sh->sector); /* clear completed biofills */ - spin_lock_irq(&conf->device_lock); for (i = sh->disks; i--; ) { struct r5dev *dev = &sh->dev[i]; @@ -774,7 +793,7 @@ static void ops_complete_biofill(void *stripe_head_ref) while (rbi && rbi->bi_sector < dev->sector + STRIPE_SECTORS) { rbi2 = r5_next_bio(rbi, dev->sector); - if (!raid5_dec_bi_phys_segments(rbi)) { + if (!raid5_dec_bi_active_stripes(rbi)) { rbi->bi_next = return_bi; return_bi = rbi; } @@ -782,7 +801,6 @@ static void ops_complete_biofill(void *stripe_head_ref) } } } - spin_unlock_irq(&conf->device_lock); clear_bit(STRIPE_BIOFILL_RUN, &sh->state); return_io(return_bi); @@ -794,7 +812,6 @@ static void ops_complete_biofill(void *stripe_head_ref) static void ops_run_biofill(struct stripe_head *sh) { struct dma_async_tx_descriptor *tx = NULL; - struct r5conf *conf = sh->raid_conf; struct async_submit_ctl submit; int i; @@ -805,10 +822,10 @@ static void ops_run_biofill(struct stripe_head *sh) struct r5dev *dev = &sh->dev[i]; if (test_bit(R5_Wantfill, &dev->flags)) { struct bio *rbi; - spin_lock_irq(&conf->device_lock); + spin_lock_irq(&sh->stripe_lock); dev->read = rbi = dev->toread; dev->toread = NULL; - spin_unlock_irq(&conf->device_lock); + spin_unlock_irq(&sh->stripe_lock); while (rbi && rbi->bi_sector < dev->sector + STRIPE_SECTORS) { tx = async_copy_data(0, rbi, dev->page, @@ -1144,12 +1161,12 @@ ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx) if (test_and_clear_bit(R5_Wantdrain, &dev->flags)) { struct bio *wbi; - spin_lock_irq(&sh->raid_conf->device_lock); + spin_lock_irq(&sh->stripe_lock); chosen = dev->towrite; dev->towrite = NULL; BUG_ON(dev->written); wbi = dev->written = chosen; - spin_unlock_irq(&sh->raid_conf->device_lock); + spin_unlock_irq(&sh->stripe_lock); while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) { @@ -1454,6 +1471,8 @@ static int grow_one_stripe(struct r5conf *conf) init_waitqueue_head(&sh->ops.wait_for_ops); #endif + spin_lock_init(&sh->stripe_lock); + if (grow_buffers(sh)) { shrink_buffers(sh); kmem_cache_free(conf->slab_cache, sh); @@ -1572,6 +1591,7 @@ static int resize_stripes(struct r5conf *conf, int newsize) #ifdef CONFIG_MULTICORE_RAID456 init_waitqueue_head(&nsh->ops.wait_for_ops); #endif + spin_lock_init(&nsh->stripe_lock); list_add(&nsh->lru, &newstripes); } @@ -1739,7 +1759,9 @@ static void raid5_end_read_request(struct bio * bi, int error) atomic_add(STRIPE_SECTORS, &rdev->corrected_errors); clear_bit(R5_ReadError, &sh->dev[i].flags); clear_bit(R5_ReWrite, &sh->dev[i].flags); - } + } else if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) + clear_bit(R5_ReadNoMerge, &sh->dev[i].flags); + if (atomic_read(&rdev->read_errors)) atomic_set(&rdev->read_errors, 0); } else { @@ -1784,7 +1806,11 @@ static void raid5_end_read_request(struct bio * bi, int error) else retry = 1; if (retry) - set_bit(R5_ReadError, &sh->dev[i].flags); + if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) { + set_bit(R5_ReadError, &sh->dev[i].flags); + clear_bit(R5_ReadNoMerge, &sh->dev[i].flags); + } else + set_bit(R5_ReadNoMerge, &sh->dev[i].flags); else { clear_bit(R5_ReadError, &sh->dev[i].flags); clear_bit(R5_ReWrite, &sh->dev[i].flags); @@ -2340,11 +2366,18 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in (unsigned long long)bi->bi_sector, (unsigned long long)sh->sector); - - spin_lock_irq(&conf->device_lock); + /* + * If several bio share a stripe. The bio bi_phys_segments acts as a + * reference count to avoid race. The reference count should already be + * increased before this function is called (for example, in + * make_request()), so other bio sharing this stripe will not free the + * stripe. If a stripe is owned by one stripe, the stripe lock will + * protect it. + */ + spin_lock_irq(&sh->stripe_lock); if (forwrite) { bip = &sh->dev[dd_idx].towrite; - if (*bip == NULL && sh->dev[dd_idx].written == NULL) + if (*bip == NULL) firstwrite = 1; } else bip = &sh->dev[dd_idx].toread; @@ -2360,7 +2393,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in if (*bip) bi->bi_next = *bip; *bip = bi; - bi->bi_phys_segments++; + raid5_inc_bi_active_stripes(bi); if (forwrite) { /* check if page is covered */ @@ -2375,7 +2408,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in if (sector >= sh->dev[dd_idx].sector + STRIPE_SECTORS) set_bit(R5_OVERWRITE, &sh->dev[dd_idx].flags); } - spin_unlock_irq(&conf->device_lock); + spin_unlock_irq(&sh->stripe_lock); pr_debug("added bi b#%llu to stripe s#%llu, disk %d.\n", (unsigned long long)(*bip)->bi_sector, @@ -2391,7 +2424,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in overlap: set_bit(R5_Overlap, &sh->dev[dd_idx].flags); - spin_unlock_irq(&conf->device_lock); + spin_unlock_irq(&sh->stripe_lock); return 0; } @@ -2441,10 +2474,11 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh, rdev_dec_pending(rdev, conf->mddev); } } - spin_lock_irq(&conf->device_lock); + spin_lock_irq(&sh->stripe_lock); /* fail all writes first */ bi = sh->dev[i].towrite; sh->dev[i].towrite = NULL; + spin_unlock_irq(&sh->stripe_lock); if (bi) { s->to_write--; bitmap_end = 1; @@ -2457,13 +2491,17 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh, sh->dev[i].sector + STRIPE_SECTORS) { struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (!raid5_dec_bi_phys_segments(bi)) { + if (!raid5_dec_bi_active_stripes(bi)) { md_write_end(conf->mddev); bi->bi_next = *return_bi; *return_bi = bi; } bi = nextbi; } + if (bitmap_end) + bitmap_endwrite(conf->mddev->bitmap, sh->sector, + STRIPE_SECTORS, 0, 0); + bitmap_end = 0; /* and fail all 'written' */ bi = sh->dev[i].written; sh->dev[i].written = NULL; @@ -2472,7 +2510,7 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh, sh->dev[i].sector + STRIPE_SECTORS) { struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector); clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (!raid5_dec_bi_phys_segments(bi)) { + if (!raid5_dec_bi_active_stripes(bi)) { md_write_end(conf->mddev); bi->bi_next = *return_bi; *return_bi = bi; @@ -2496,14 +2534,13 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh, struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (!raid5_dec_bi_phys_segments(bi)) { + if (!raid5_dec_bi_active_stripes(bi)) { bi->bi_next = *return_bi; *return_bi = bi; } bi = nextbi; } } - spin_unlock_irq(&conf->device_lock); if (bitmap_end) bitmap_endwrite(conf->mddev->bitmap, sh->sector, STRIPE_SECTORS, 0, 0); @@ -2707,30 +2744,23 @@ static void handle_stripe_clean_event(struct r5conf *conf, test_bit(R5_UPTODATE, &dev->flags)) { /* We can return any write requests */ struct bio *wbi, *wbi2; - int bitmap_end = 0; pr_debug("Return write for disc %d\n", i); - spin_lock_irq(&conf->device_lock); wbi = dev->written; dev->written = NULL; while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) { wbi2 = r5_next_bio(wbi, dev->sector); - if (!raid5_dec_bi_phys_segments(wbi)) { + if (!raid5_dec_bi_active_stripes(wbi)) { md_write_end(conf->mddev); wbi->bi_next = *return_bi; *return_bi = wbi; } wbi = wbi2; } - if (dev->towrite == NULL) - bitmap_end = 1; - spin_unlock_irq(&conf->device_lock); - if (bitmap_end) - bitmap_endwrite(conf->mddev->bitmap, - sh->sector, - STRIPE_SECTORS, + bitmap_endwrite(conf->mddev->bitmap, sh->sector, + STRIPE_SECTORS, !test_bit(STRIPE_DEGRADED, &sh->state), - 0); + 0); } } @@ -3182,7 +3212,6 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) /* Now to look around and see what can be done */ rcu_read_lock(); - spin_lock_irq(&conf->device_lock); for (i=disks; i--; ) { struct md_rdev *rdev; sector_t first_bad; @@ -3328,7 +3357,6 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) do_recovery = 1; } } - spin_unlock_irq(&conf->device_lock); if (test_bit(STRIPE_SYNCING, &sh->state)) { /* If there is a failed device being replaced, * we must be recovering. @@ -3791,7 +3819,7 @@ static struct bio *remove_bio_from_retry(struct r5conf *conf) * this sets the active strip count to 1 and the processed * strip count to zero (upper 8 bits) */ - bi->bi_phys_segments = 1; /* biased count of active stripes */ + raid5_set_bi_stripes(bi, 1); /* biased count of active stripes */ } return bi; @@ -3988,6 +4016,62 @@ static struct stripe_head *__get_priority_stripe(struct r5conf *conf) return sh; } +struct raid5_plug_cb { + struct blk_plug_cb cb; + struct list_head list; +}; + +static void raid5_unplug(struct blk_plug_cb *blk_cb, bool from_schedule) +{ + struct raid5_plug_cb *cb = container_of( + blk_cb, struct raid5_plug_cb, cb); + struct stripe_head *sh; + struct mddev *mddev = cb->cb.data; + struct r5conf *conf = mddev->private; + + if (cb->list.next && !list_empty(&cb->list)) { + spin_lock_irq(&conf->device_lock); + while (!list_empty(&cb->list)) { + sh = list_first_entry(&cb->list, struct stripe_head, lru); + list_del_init(&sh->lru); + /* + * avoid race release_stripe_plug() sees + * STRIPE_ON_UNPLUG_LIST clear but the stripe + * is still in our list + */ + smp_mb__before_clear_bit(); + clear_bit(STRIPE_ON_UNPLUG_LIST, &sh->state); + __release_stripe(conf, sh); + } + spin_unlock_irq(&conf->device_lock); + } + kfree(cb); +} + +static void release_stripe_plug(struct mddev *mddev, + struct stripe_head *sh) +{ + struct blk_plug_cb *blk_cb = blk_check_plugged( + raid5_unplug, mddev, + sizeof(struct raid5_plug_cb)); + struct raid5_plug_cb *cb; + + if (!blk_cb) { + release_stripe(sh); + return; + } + + cb = container_of(blk_cb, struct raid5_plug_cb, cb); + + if (cb->list.next == NULL) + INIT_LIST_HEAD(&cb->list); + + if (!test_and_set_bit(STRIPE_ON_UNPLUG_LIST, &sh->state)) + list_add_tail(&sh->lru, &cb->list); + else + release_stripe(sh); +} + static void make_request(struct mddev *mddev, struct bio * bi) { struct r5conf *conf = mddev->private; @@ -4116,8 +4200,7 @@ static void make_request(struct mddev *mddev, struct bio * bi) if ((bi->bi_rw & REQ_SYNC) && !test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) atomic_inc(&conf->preread_active_stripes); - mddev_check_plugged(mddev); - release_stripe(sh); + release_stripe_plug(mddev, sh); } else { /* cannot get stripe for read-ahead, just give-up */ clear_bit(BIO_UPTODATE, &bi->bi_flags); @@ -4126,9 +4209,7 @@ static void make_request(struct mddev *mddev, struct bio * bi) } } - spin_lock_irq(&conf->device_lock); - remaining = raid5_dec_bi_phys_segments(bi); - spin_unlock_irq(&conf->device_lock); + remaining = raid5_dec_bi_active_stripes(bi); if (remaining == 0) { if ( rw == WRITE ) @@ -4484,7 +4565,7 @@ static int retry_aligned_read(struct r5conf *conf, struct bio *raid_bio) sector += STRIPE_SECTORS, scnt++) { - if (scnt < raid5_bi_hw_segments(raid_bio)) + if (scnt < raid5_bi_processed_stripes(raid_bio)) /* already done this stripe */ continue; @@ -4492,25 +4573,24 @@ static int retry_aligned_read(struct r5conf *conf, struct bio *raid_bio) if (!sh) { /* failed to get a stripe - must wait */ - raid5_set_bi_hw_segments(raid_bio, scnt); + raid5_set_bi_processed_stripes(raid_bio, scnt); conf->retry_read_aligned = raid_bio; return handled; } if (!add_stripe_bio(sh, raid_bio, dd_idx, 0)) { release_stripe(sh); - raid5_set_bi_hw_segments(raid_bio, scnt); + raid5_set_bi_processed_stripes(raid_bio, scnt); conf->retry_read_aligned = raid_bio; return handled; } + set_bit(R5_ReadNoMerge, &sh->dev[dd_idx].flags); handle_stripe(sh); release_stripe(sh); handled++; } - spin_lock_irq(&conf->device_lock); - remaining = raid5_dec_bi_phys_segments(raid_bio); - spin_unlock_irq(&conf->device_lock); + remaining = raid5_dec_bi_active_stripes(raid_bio); if (remaining == 0) bio_endio(raid_bio, 0); if (atomic_dec_and_test(&conf->active_aligned_reads)) @@ -4518,6 +4598,30 @@ static int retry_aligned_read(struct r5conf *conf, struct bio *raid_bio) return handled; } +#define MAX_STRIPE_BATCH 8 +static int handle_active_stripes(struct r5conf *conf) +{ + struct stripe_head *batch[MAX_STRIPE_BATCH], *sh; + int i, batch_size = 0; + + while (batch_size < MAX_STRIPE_BATCH && + (sh = __get_priority_stripe(conf)) != NULL) + batch[batch_size++] = sh; + + if (batch_size == 0) + return batch_size; + spin_unlock_irq(&conf->device_lock); + + for (i = 0; i < batch_size; i++) + handle_stripe(batch[i]); + + cond_resched(); + + spin_lock_irq(&conf->device_lock); + for (i = 0; i < batch_size; i++) + __release_stripe(conf, batch[i]); + return batch_size; +} /* * This is our raid5 kernel thread. @@ -4528,7 +4632,6 @@ static int retry_aligned_read(struct r5conf *conf, struct bio *raid_bio) */ static void raid5d(struct mddev *mddev) { - struct stripe_head *sh; struct r5conf *conf = mddev->private; int handled; struct blk_plug plug; @@ -4542,8 +4645,9 @@ static void raid5d(struct mddev *mddev) spin_lock_irq(&conf->device_lock); while (1) { struct bio *bio; + int batch_size; - if (atomic_read(&mddev->plug_cnt) == 0 && + if ( !list_empty(&conf->bitmap_list)) { /* Now is a good time to flush some bitmap updates */ conf->seq_flush++; @@ -4553,8 +4657,7 @@ static void raid5d(struct mddev *mddev) conf->seq_write = conf->seq_flush; activate_bit_delay(conf); } - if (atomic_read(&mddev->plug_cnt) == 0) - raid5_activate_delayed(conf); + raid5_activate_delayed(conf); while ((bio = remove_bio_from_retry(conf))) { int ok; @@ -4566,21 +4669,16 @@ static void raid5d(struct mddev *mddev) handled++; } - sh = __get_priority_stripe(conf); - - if (!sh) + batch_size = handle_active_stripes(conf); + if (!batch_size) break; - spin_unlock_irq(&conf->device_lock); - - handled++; - handle_stripe(sh); - release_stripe(sh); - cond_resched(); + handled += batch_size; - if (mddev->flags & ~(1<flags & ~(1<device_lock); md_check_recovery(mddev); - - spin_lock_irq(&conf->device_lock); + spin_lock_irq(&conf->device_lock); + } } pr_debug("%d stripes handled\n", handled); diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h index 2164021f3b5f6548b96ac067aac67bd7874dcd10..a9fc24901edad817b599219e9fb4c596c4c9e29b 100644 --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -210,6 +210,7 @@ struct stripe_head { int disks; /* disks in stripe */ enum check_states check_state; enum reconstruct_states reconstruct_state; + spinlock_t stripe_lock; /** * struct stripe_operations * @target - STRIPE_OP_COMPUTE_BLK target @@ -273,6 +274,7 @@ enum r5dev_flags { R5_Wantwrite, R5_Overlap, /* There is a pending overlapping request * on this block */ + R5_ReadNoMerge, /* prevent bio from merging in block-layer */ R5_ReadError, /* seen a read error here recently */ R5_ReWrite, /* have tried to over-write the readerror */ @@ -319,6 +321,7 @@ enum { STRIPE_BIOFILL_RUN, STRIPE_COMPUTE_RUN, STRIPE_OPS_REQ_PENDING, + STRIPE_ON_UNPLUG_LIST, }; /* diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index d941581ab92169c935a85754c6fc28d2bc2dd79a..dd13e3a4c272965bf23cde32b3409bd28dda6f62 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -99,11 +99,6 @@ config VIDEO_DEV depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT default y -config VIDEO_V4L2_COMMON - tristate - depends on (I2C || I2C=n) && VIDEO_DEV - default (I2C || I2C=n) && VIDEO_DEV - config VIDEO_V4L2_SUBDEV_API bool "V4L2 sub-device userspace API (EXPERIMENTAL)" depends on VIDEO_DEV && MEDIA_CONTROLLER && EXPERIMENTAL @@ -113,6 +108,8 @@ config VIDEO_V4L2_SUBDEV_API This API is mostly used by camera interfaces in embedded platforms. +source "drivers/media/v4l2-core/Kconfig" + # # DVB Core # Only enables if one of DTV is selected @@ -138,28 +135,54 @@ config DVB_NET You may want to disable the network support on embedded devices. If unsure say Y. +source "drivers/media/dvb-core/Kconfig" + comment "Media drivers" -source "drivers/media/common/Kconfig" source "drivers/media/rc/Kconfig" # -# Tuner drivers for DVB and V4L +# V4L platform/mem2mem drivers # -source "drivers/media/common/tuners/Kconfig" +source "drivers/media/usb/Kconfig" +source "drivers/media/pci/Kconfig" +source "drivers/media/platform/Kconfig" +source "drivers/media/mmc/Kconfig" +source "drivers/media/parport/Kconfig" +source "drivers/media/radio/Kconfig" + +comment "Supported FireWire (IEEE 1394) Adapters" + depends on DVB_CORE && FIREWIRE +source "drivers/media/firewire/Kconfig" + +# Common driver options +source "drivers/media/common/Kconfig" # -# Video/Radio/Hybrid adapters +# Ancillary drivers (tuners, i2c, frontends) # -source "drivers/media/video/Kconfig" +config MEDIA_SUBDRV_AUTOSELECT + bool "Autoselect analog and hybrid tuner modules to build" + depends on MEDIA_TUNER + default y + help + By default, a TV driver auto-selects all possible tuners + thar could be used by the driver. -source "drivers/media/radio/Kconfig" + This is generally the right thing to do, except when there + are strict constraints with regards to the kernel size. -# -# DVB adapters -# + Use this option with care, as deselecting tuner drivers which + are in fact necessary will result in TV devices which cannot + be tuned due to lack of the tuning driver. + + If unsure say Y. + +comment "Media ancillary drivers (tuners, sensors, i2c, frontends)" -source "drivers/media/dvb/Kconfig" +source "drivers/media/i2c/Kconfig" +source "drivers/media/tuners/Kconfig" +source "drivers/media/dvb-frontends/Kconfig" endif # MEDIA_SUPPORT diff --git a/drivers/media/Makefile b/drivers/media/Makefile index 64755c99ded291e526a8dd7fa5a83e73496486e4..620f275a45c9903069a1ebd7bb24370de71f3f4e 100644 --- a/drivers/media/Makefile +++ b/drivers/media/Makefile @@ -4,11 +4,30 @@ media-objs := media-device.o media-devnode.o media-entity.o +# +# I2C drivers should come before other drivers, otherwise they'll fail +# when compiled as builtin drivers +# +obj-y += i2c/ tuners/ +obj-$(CONFIG_DVB_CORE) += dvb-frontends/ + +# +# Now, let's link-in the media core +# ifeq ($(CONFIG_MEDIA_CONTROLLER),y) obj-$(CONFIG_MEDIA_SUPPORT) += media.o endif -obj-y += common/ rc/ video/ +obj-$(CONFIG_VIDEO_DEV) += v4l2-core/ +obj-$(CONFIG_DVB_CORE) += dvb-core/ +# There are both core and drivers at RC subtree - merge before drivers +obj-y += rc/ + +# +# Finally, merge the drivers that require the core +# + +obj-y += common/ platform/ pci/ usb/ mmc/ firewire/ parport/ obj-$(CONFIG_VIDEO_DEV) += radio/ -obj-$(CONFIG_DVB_CORE) += dvb/ + diff --git a/drivers/media/common/Kconfig b/drivers/media/common/Kconfig index 769c6f8142d2cd750b9e520ecaaed6a24a525bfa..121b0110af3c525055e426bb7e206c02f2389c04 100644 --- a/drivers/media/common/Kconfig +++ b/drivers/media/common/Kconfig @@ -1,9 +1,3 @@ -config VIDEO_SAA7146 - tristate - depends on I2C && PCI - -config VIDEO_SAA7146_VV - tristate - depends on VIDEO_V4L2 - select VIDEOBUF_DMA_SG - select VIDEO_SAA7146 +source "drivers/media/common/b2c2/Kconfig" +source "drivers/media/common/saa7146/Kconfig" +source "drivers/media/common/siano/Kconfig" diff --git a/drivers/media/common/Makefile b/drivers/media/common/Makefile index e3ec9639321b750ab10d953899e843687adc0cc3..b8e2e3a33a319d408efc812d9bb8109d85deffd5 100644 --- a/drivers/media/common/Makefile +++ b/drivers/media/common/Makefile @@ -1,6 +1 @@ -saa7146-objs := saa7146_i2c.o saa7146_core.o -saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o - -obj-y += tuners/ -obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o -obj-$(CONFIG_VIDEO_SAA7146_VV) += saa7146_vv.o +obj-y += b2c2/ saa7146/ siano/ diff --git a/drivers/media/common/b2c2/Kconfig b/drivers/media/common/b2c2/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..1df9e578daa5c5309fa5ee3db19df3de6da83857 --- /dev/null +++ b/drivers/media/common/b2c2/Kconfig @@ -0,0 +1,28 @@ +config DVB_B2C2_FLEXCOP + tristate + depends on DVB_CORE && I2C + depends on DVB_B2C2_FLEXCOP_PCI || DVB_B2C2_FLEXCOP_USB + default y + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT312 if MEDIA_SUBDRV_AUTOSELECT + select DVB_NXT200X if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT + select DVB_BCM3510 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1420 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_ITD1000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24123 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_CX24113 if MEDIA_SUBDRV_AUTOSELECT + help + Support for the digital TV receiver chip made by B2C2 Inc. included in + Technisats PCI cards and USB boxes. + + Say Y if you own such a device and want to use it. + +# Selected via the PCI or USB flexcop drivers +config DVB_B2C2_FLEXCOP_DEBUG + bool diff --git a/drivers/media/common/b2c2/Makefile b/drivers/media/common/b2c2/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..24993a5b38ba81fe27e2b16f85f02be70944849f --- /dev/null +++ b/drivers/media/common/b2c2/Makefile @@ -0,0 +1,8 @@ +b2c2-flexcop-objs += flexcop.o flexcop-fe-tuner.o flexcop-i2c.o +b2c2-flexcop-objs += flexcop-sram.o flexcop-eeprom.o flexcop-misc.o +b2c2-flexcop-objs += flexcop-hw-filter.o +obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o + +ccflags-y += -Idrivers/media/dvb-core/ +ccflags-y += -Idrivers/media/dvb-frontends/ +ccflags-y += -Idrivers/media/tuners/ diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/common/b2c2/flexcop-common.h similarity index 100% rename from drivers/media/dvb/b2c2/flexcop-common.h rename to drivers/media/common/b2c2/flexcop-common.h diff --git a/drivers/media/dvb/b2c2/flexcop-eeprom.c b/drivers/media/common/b2c2/flexcop-eeprom.c similarity index 100% rename from drivers/media/dvb/b2c2/flexcop-eeprom.c rename to drivers/media/common/b2c2/flexcop-eeprom.c diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/common/b2c2/flexcop-fe-tuner.c similarity index 100% rename from drivers/media/dvb/b2c2/flexcop-fe-tuner.c rename to drivers/media/common/b2c2/flexcop-fe-tuner.c diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/common/b2c2/flexcop-hw-filter.c similarity index 100% rename from drivers/media/dvb/b2c2/flexcop-hw-filter.c rename to drivers/media/common/b2c2/flexcop-hw-filter.c diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/common/b2c2/flexcop-i2c.c similarity index 100% rename from drivers/media/dvb/b2c2/flexcop-i2c.c rename to drivers/media/common/b2c2/flexcop-i2c.c diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/common/b2c2/flexcop-misc.c similarity index 100% rename from drivers/media/dvb/b2c2/flexcop-misc.c rename to drivers/media/common/b2c2/flexcop-misc.c diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/common/b2c2/flexcop-reg.h similarity index 100% rename from drivers/media/dvb/b2c2/flexcop-reg.h rename to drivers/media/common/b2c2/flexcop-reg.h diff --git a/drivers/media/dvb/b2c2/flexcop-sram.c b/drivers/media/common/b2c2/flexcop-sram.c similarity index 100% rename from drivers/media/dvb/b2c2/flexcop-sram.c rename to drivers/media/common/b2c2/flexcop-sram.c diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/common/b2c2/flexcop.c similarity index 99% rename from drivers/media/dvb/b2c2/flexcop.c rename to drivers/media/common/b2c2/flexcop.c index b1e8c99f469b403005cdb9ff7680050c1ea6278b..412c5daf2b48c4208f2fb0bd60ed50fb2f4acbef 100644 --- a/drivers/media/dvb/b2c2/flexcop.c +++ b/drivers/media/common/b2c2/flexcop.c @@ -43,6 +43,7 @@ #endif int b2c2_flexcop_debug; +EXPORT_SYMBOL_GPL(b2c2_flexcop_debug); module_param_named(debug, b2c2_flexcop_debug, int, 0644); MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts," diff --git a/drivers/media/dvb/b2c2/flexcop.h b/drivers/media/common/b2c2/flexcop.h similarity index 100% rename from drivers/media/dvb/b2c2/flexcop.h rename to drivers/media/common/b2c2/flexcop.h diff --git a/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h b/drivers/media/common/b2c2/flexcop_ibi_value_be.h similarity index 100% rename from drivers/media/dvb/b2c2/flexcop_ibi_value_be.h rename to drivers/media/common/b2c2/flexcop_ibi_value_be.h diff --git a/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h b/drivers/media/common/b2c2/flexcop_ibi_value_le.h similarity index 100% rename from drivers/media/dvb/b2c2/flexcop_ibi_value_le.h rename to drivers/media/common/b2c2/flexcop_ibi_value_le.h diff --git a/drivers/media/common/saa7146/Kconfig b/drivers/media/common/saa7146/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..769c6f8142d2cd750b9e520ecaaed6a24a525bfa --- /dev/null +++ b/drivers/media/common/saa7146/Kconfig @@ -0,0 +1,9 @@ +config VIDEO_SAA7146 + tristate + depends on I2C && PCI + +config VIDEO_SAA7146_VV + tristate + depends on VIDEO_V4L2 + select VIDEOBUF_DMA_SG + select VIDEO_SAA7146 diff --git a/drivers/media/common/saa7146/Makefile b/drivers/media/common/saa7146/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..3219b00a87712611af7fe9bf2f59f8c69ce7ddc8 --- /dev/null +++ b/drivers/media/common/saa7146/Makefile @@ -0,0 +1,5 @@ +saa7146-objs := saa7146_i2c.o saa7146_core.o +saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o + +obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o +obj-$(CONFIG_VIDEO_SAA7146_VV) += saa7146_vv.o diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146/saa7146_core.c similarity index 98% rename from drivers/media/common/saa7146_core.c rename to drivers/media/common/saa7146/saa7146_core.c index d6b1cf66042d196b40a7b99c18241fe186840d1d..bb6ee5191eb183a415c6de0350a3ae02877a3fd2 100644 --- a/drivers/media/common/saa7146_core.c +++ b/drivers/media/common/saa7146/saa7146_core.c @@ -23,9 +23,6 @@ #include #include -LIST_HEAD(saa7146_devices); -DEFINE_MUTEX(saa7146_devices_lock); - static int saa7146_num; unsigned int saa7146_debug; @@ -482,8 +479,6 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent set it explicitly. */ pci_set_drvdata(pci, &dev->v4l2_dev); - INIT_LIST_HEAD(&dev->item); - list_add_tail(&dev->item,&saa7146_devices); saa7146_num++; err = 0; @@ -545,7 +540,6 @@ static void saa7146_remove_one(struct pci_dev *pdev) iounmap(dev->mem); pci_release_region(pdev, 0); - list_del(&dev->item); pci_disable_device(pdev); kfree(dev); @@ -592,8 +586,6 @@ EXPORT_SYMBOL_GPL(saa7146_setgpio); EXPORT_SYMBOL_GPL(saa7146_i2c_adapter_prepare); EXPORT_SYMBOL_GPL(saa7146_debug); -EXPORT_SYMBOL_GPL(saa7146_devices); -EXPORT_SYMBOL_GPL(saa7146_devices_lock); MODULE_AUTHOR("Michael Hunold "); MODULE_DESCRIPTION("driver for generic saa7146-based hardware"); diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146/saa7146_fops.c similarity index 94% rename from drivers/media/common/saa7146_fops.c rename to drivers/media/common/saa7146/saa7146_fops.c index 0cdbd742974ae0404ccf724d734ea5da08a6f821..b3890bd49df6089fa0871f70d7b09abc47375b4c 100644 --- a/drivers/media/common/saa7146_fops.c +++ b/drivers/media/common/saa7146/saa7146_fops.c @@ -201,7 +201,7 @@ static int fops_open(struct file *file) DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev)); - if (mutex_lock_interruptible(&saa7146_devices_lock)) + if (mutex_lock_interruptible(vdev->lock)) return -ERESTARTSYS; DEB_D("using: %p\n", dev); @@ -253,7 +253,7 @@ static int fops_open(struct file *file) kfree(fh); file->private_data = NULL; } - mutex_unlock(&saa7146_devices_lock); + mutex_unlock(vdev->lock); return result; } @@ -265,7 +265,7 @@ static int fops_release(struct file *file) DEB_EE("file:%p\n", file); - if (mutex_lock_interruptible(&saa7146_devices_lock)) + if (mutex_lock_interruptible(vdev->lock)) return -ERESTARTSYS; if (vdev->vfl_type == VFL_TYPE_VBI) { @@ -283,7 +283,7 @@ static int fops_release(struct file *file) file->private_data = NULL; kfree(fh); - mutex_unlock(&saa7146_devices_lock); + mutex_unlock(vdev->lock); return 0; } @@ -293,6 +293,7 @@ static int fops_mmap(struct file *file, struct vm_area_struct * vma) struct video_device *vdev = video_devdata(file); struct saa7146_fh *fh = file->private_data; struct videobuf_queue *q; + int res; switch (vdev->vfl_type) { case VFL_TYPE_GRABBER: { @@ -314,10 +315,14 @@ static int fops_mmap(struct file *file, struct vm_area_struct * vma) return 0; } - return videobuf_mmap_mapper(q,vma); + if (mutex_lock_interruptible(vdev->lock)) + return -ERESTARTSYS; + res = videobuf_mmap_mapper(q, vma); + mutex_unlock(vdev->lock); + return res; } -static unsigned int fops_poll(struct file *file, struct poll_table_struct *wait) +static unsigned int __fops_poll(struct file *file, struct poll_table_struct *wait) { struct video_device *vdev = video_devdata(file); struct saa7146_fh *fh = file->private_data; @@ -356,10 +361,22 @@ static unsigned int fops_poll(struct file *file, struct poll_table_struct *wait) return res; } +static unsigned int fops_poll(struct file *file, struct poll_table_struct *wait) +{ + struct video_device *vdev = video_devdata(file); + unsigned int res; + + mutex_lock(vdev->lock); + res = __fops_poll(file, wait); + mutex_unlock(vdev->lock); + return res; +} + static ssize_t fops_read(struct file *file, char __user *data, size_t count, loff_t *ppos) { struct video_device *vdev = video_devdata(file); struct saa7146_fh *fh = file->private_data; + int ret; switch (vdev->vfl_type) { case VFL_TYPE_GRABBER: @@ -373,8 +390,13 @@ static ssize_t fops_read(struct file *file, char __user *data, size_t count, lof DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, data:%p, count:%lu\n", file, data, (unsigned long)count); */ - if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) - return saa7146_vbi_uops.read(file,data,count,ppos); + if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) { + if (mutex_lock_interruptible(vdev->lock)) + return -ERESTARTSYS; + ret = saa7146_vbi_uops.read(file, data, count, ppos); + mutex_unlock(vdev->lock); + return ret; + } return -EINVAL; default: BUG(); @@ -386,15 +408,20 @@ static ssize_t fops_write(struct file *file, const char __user *data, size_t cou { struct video_device *vdev = video_devdata(file); struct saa7146_fh *fh = file->private_data; + int ret; switch (vdev->vfl_type) { case VFL_TYPE_GRABBER: return -EINVAL; case VFL_TYPE_VBI: - if (fh->dev->ext_vv_data->vbi_fops.write) - return fh->dev->ext_vv_data->vbi_fops.write(file, data, count, ppos); - else - return -EINVAL; + if (fh->dev->ext_vv_data->vbi_fops.write) { + if (mutex_lock_interruptible(vdev->lock)) + return -ERESTARTSYS; + ret = fh->dev->ext_vv_data->vbi_fops.write(file, data, count, ppos); + mutex_unlock(vdev->lock); + return ret; + } + return -EINVAL; default: BUG(); return -EINVAL; @@ -584,10 +611,6 @@ int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev, else vfd->ioctl_ops = &dev->ext_vv_data->vbi_ops; vfd->release = video_device_release; - /* Locking in file operations other than ioctl should be done by - the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vfd->flags); vfd->lock = &dev->v4l2_lock; vfd->v4l2_dev = &dev->v4l2_dev; vfd->tvnorms = 0; diff --git a/drivers/media/common/saa7146_hlp.c b/drivers/media/common/saa7146/saa7146_hlp.c similarity index 100% rename from drivers/media/common/saa7146_hlp.c rename to drivers/media/common/saa7146/saa7146_hlp.c diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146/saa7146_i2c.c similarity index 100% rename from drivers/media/common/saa7146_i2c.c rename to drivers/media/common/saa7146/saa7146_i2c.c diff --git a/drivers/media/common/saa7146_vbi.c b/drivers/media/common/saa7146/saa7146_vbi.c similarity index 100% rename from drivers/media/common/saa7146_vbi.c rename to drivers/media/common/saa7146/saa7146_vbi.c diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146/saa7146_video.c similarity index 99% rename from drivers/media/common/saa7146_video.c rename to drivers/media/common/saa7146/saa7146_video.c index 6d14785d47471fd1c290c5ee43cf792ac30245f7..4143d61f79b1013b54156e7ee88a4d82234dc9ed 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146/saa7146_video.c @@ -479,7 +479,7 @@ static int vidioc_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *f return 0; } -static int vidioc_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) +static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *fb) { struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; struct saa7146_vv *vv = dev->vv_data; diff --git a/drivers/media/common/siano/Kconfig b/drivers/media/common/siano/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..425aeadfb49dea3f3727bfb5f4c27abf7212cba5 --- /dev/null +++ b/drivers/media/common/siano/Kconfig @@ -0,0 +1,17 @@ +# +# Siano Mobile Silicon Digital TV device configuration +# + +config SMS_SIANO_MDTV + tristate + depends on DVB_CORE && RC_CORE && HAS_DMA + depends on SMS_USB_DRV || SMS_SDIO_DRV + default y + ---help--- + Choose Y or M here if you have MDTV receiver with a Siano chipset. + + To compile this driver as a module, choose M here + (The module will be called smsmdtv). + + Further documentation on this driver can be found on the WWW + at http://www.siano-ms.com/ diff --git a/drivers/media/dvb/siano/Makefile b/drivers/media/common/siano/Makefile similarity index 57% rename from drivers/media/dvb/siano/Makefile rename to drivers/media/common/siano/Makefile index f233b57c86fb61144a6a32c11ed82e10c823d1c0..2a09279e0648edd912897140084e001820cbbbb0 100644 --- a/drivers/media/dvb/siano/Makefile +++ b/drivers/media/common/siano/Makefile @@ -1,11 +1,7 @@ - smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o -obj-$(CONFIG_SMS_USB_DRV) += smsusb.o -obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o - -ccflags-y += -Idrivers/media/dvb/dvb-core +ccflags-y += -Idrivers/media/dvb-core ccflags-y += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/common/siano/sms-cards.c similarity index 100% rename from drivers/media/dvb/siano/sms-cards.c rename to drivers/media/common/siano/sms-cards.c diff --git a/drivers/media/dvb/siano/sms-cards.h b/drivers/media/common/siano/sms-cards.h similarity index 100% rename from drivers/media/dvb/siano/sms-cards.h rename to drivers/media/common/siano/sms-cards.h diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/common/siano/smscoreapi.c similarity index 100% rename from drivers/media/dvb/siano/smscoreapi.c rename to drivers/media/common/siano/smscoreapi.c diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/common/siano/smscoreapi.h similarity index 100% rename from drivers/media/dvb/siano/smscoreapi.h rename to drivers/media/common/siano/smscoreapi.h diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/common/siano/smsdvb.c similarity index 100% rename from drivers/media/dvb/siano/smsdvb.c rename to drivers/media/common/siano/smsdvb.c diff --git a/drivers/media/dvb/siano/smsendian.c b/drivers/media/common/siano/smsendian.c similarity index 100% rename from drivers/media/dvb/siano/smsendian.c rename to drivers/media/common/siano/smsendian.c diff --git a/drivers/media/dvb/siano/smsendian.h b/drivers/media/common/siano/smsendian.h similarity index 100% rename from drivers/media/dvb/siano/smsendian.h rename to drivers/media/common/siano/smsendian.h diff --git a/drivers/media/dvb/siano/smsir.c b/drivers/media/common/siano/smsir.c similarity index 100% rename from drivers/media/dvb/siano/smsir.c rename to drivers/media/common/siano/smsir.c diff --git a/drivers/media/dvb/siano/smsir.h b/drivers/media/common/siano/smsir.h similarity index 100% rename from drivers/media/dvb/siano/smsir.h rename to drivers/media/common/siano/smsir.h diff --git a/drivers/media/dvb-core/Kconfig b/drivers/media/dvb-core/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..fa7a2490ed5f107cf6f912527bcbe57ec7fe1669 --- /dev/null +++ b/drivers/media/dvb-core/Kconfig @@ -0,0 +1,29 @@ +# +# DVB device configuration +# + +config DVB_MAX_ADAPTERS + int "maximum number of DVB/ATSC adapters" + depends on DVB_CORE + default 8 + range 1 255 + help + Maximum number of DVB/ATSC adapters. Increasing this number + increases the memory consumption of the DVB subsystem even + if a much lower number of DVB/ATSC adapters is present. + Only values in the range 4-32 are tested. + + If you are unsure about this, use the default value 8 + +config DVB_DYNAMIC_MINORS + bool "Dynamic DVB minor allocation" + depends on DVB_CORE + default n + help + If you say Y here, the DVB subsystem will use dynamic minor + allocation for any device that uses the DVB major number. + This means that you can have more than 4 of a single type + of device (like demuxes and frontends) per adapter, but udev + will be required to manage the device nodes. + + If you are unsure about this, say N here. diff --git a/drivers/media/dvb/dvb-core/Makefile b/drivers/media/dvb-core/Makefile similarity index 100% rename from drivers/media/dvb/dvb-core/Makefile rename to drivers/media/dvb-core/Makefile diff --git a/drivers/media/dvb/dvb-core/demux.h b/drivers/media/dvb-core/demux.h similarity index 100% rename from drivers/media/dvb/dvb-core/demux.h rename to drivers/media/dvb-core/demux.h diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb-core/dmxdev.c similarity index 99% rename from drivers/media/dvb/dvb-core/dmxdev.c rename to drivers/media/dvb-core/dmxdev.c index 73970cd97af1356e1fdeaea9dd733aab94a5f5c7..889c9c16c6df81ec7e2175a3d4c1f858ef4f61c2 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb-core/dmxdev.c @@ -370,9 +370,7 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len, return 0; } del_timer(&dmxdevfilter->timer); - dprintk("dmxdev: section callback %02x %02x %02x %02x %02x %02x\n", - buffer1[0], buffer1[1], - buffer1[2], buffer1[3], buffer1[4], buffer1[5]); + dprintk("dmxdev: section callback %*ph\n", 6, buffer1); ret = dvb_dmxdev_buffer_write(&dmxdevfilter->buffer, buffer1, buffer1_len); if (ret == buffer1_len) { diff --git a/drivers/media/dvb/dvb-core/dmxdev.h b/drivers/media/dvb-core/dmxdev.h similarity index 100% rename from drivers/media/dvb/dvb-core/dmxdev.h rename to drivers/media/dvb-core/dmxdev.h diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h similarity index 99% rename from drivers/media/dvb/dvb-usb/dvb-usb-ids.h rename to drivers/media/dvb-core/dvb-usb-ids.h index 26c44818a5abf23d96f344fd0e83de75b20a47b4..58e0220447c012a5b9fc7bee807bda26468fb087 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb-core/dvb-usb-ids.h @@ -24,6 +24,7 @@ #define USB_VID_COMPRO_UNK 0x145f #define USB_VID_CONEXANT 0x0572 #define USB_VID_CYPRESS 0x04b4 +#define USB_VID_DEXATEK 0x1d19 #define USB_VID_DIBCOM 0x10b8 #define USB_VID_DPOSH 0x1498 #define USB_VID_DVICO 0x0fe9 @@ -82,6 +83,7 @@ #define USB_PID_AFATECH_AF9035_1003 0x1003 #define USB_PID_AFATECH_AF9035_9035 0x9035 #define USB_PID_TREKSTOR_DVBT 0x901b +#define USB_PID_TREKSTOR_TERRES_2_0 0xC803 #define USB_VID_ALINK_DTU 0xf170 #define USB_PID_ANSONIC_DVBT_USB 0x6000 #define USB_PID_ANYSEE 0x861f @@ -327,6 +329,7 @@ #define USB_PID_ASUS_U3000 0x171f #define USB_PID_ASUS_U3000H 0x1736 #define USB_PID_ASUS_U3100 0x173f +#define USB_PID_ASUS_U3100MINI_PLUS 0x1779 #define USB_PID_YUAN_EC372S 0x1edc #define USB_PID_YUAN_STK7700PH 0x1f08 #define USB_PID_YUAN_PD378S 0x2edc diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c similarity index 100% rename from drivers/media/dvb/dvb-core/dvb_ca_en50221.c rename to drivers/media/dvb-core/dvb_ca_en50221.c diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h b/drivers/media/dvb-core/dvb_ca_en50221.h similarity index 100% rename from drivers/media/dvb/dvb-core/dvb_ca_en50221.h rename to drivers/media/dvb-core/dvb_ca_en50221.h diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c similarity index 98% rename from drivers/media/dvb/dvb-core/dvb_demux.c rename to drivers/media/dvb-core/dvb_demux.c index d82469f842e2e023a85c88f8917081b5bce2c776..d319717eb535fcefcdd983b18fd39f3d6d1c9c24 100644 --- a/drivers/media/dvb/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -50,6 +50,11 @@ module_param(dvb_demux_speedcheck, int, 0644); MODULE_PARM_DESC(dvb_demux_speedcheck, "enable transport stream speed check"); +static int dvb_demux_feed_err_pkts = 1; +module_param(dvb_demux_feed_err_pkts, int, 0644); +MODULE_PARM_DESC(dvb_demux_feed_err_pkts, + "when set to 0, drop packets with the TEI bit set (1 by default)"); + #define dprintk_tscheck(x...) do { \ if (dvb_demux_tscheck && printk_ratelimit()) \ printk(x); \ @@ -419,21 +424,25 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) printk(KERN_INFO "TS speed %llu Kbits/sec \n", div64_u64(speed_bytes, speed_timedelta)); - }; + } demux->speed_last_time = cur_time; demux->speed_pkts_cnt = 0; - }; - }; + } + } + if (buf[1] & 0x80) { + dprintk_tscheck("TEI detected. " + "PID=0x%x data1=0x%x\n", + pid, buf[1]); + /* data in this packet cant be trusted - drop it unless + * module option dvb_demux_feed_err_pkts is set */ + if (!dvb_demux_feed_err_pkts) + return; + } else /* if TEI bit is set, pid may be wrong- skip pkt counter */ if (demux->cnt_storage && dvb_demux_tscheck) { /* check pkt counter */ if (pid < MAX_PID) { - if (buf[1] & 0x80) - dprintk_tscheck("TEI detected. " - "PID=0x%x data1=0x%x\n", - pid, buf[1]); - if ((buf[3] & 0xf) != demux->cnt_storage[pid]) dprintk_tscheck("TS packet counter mismatch. " "PID=0x%x expected 0x%x " @@ -442,9 +451,9 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) buf[3] & 0xf); demux->cnt_storage[pid] = ((buf[3] & 0xf) + 1)&0xf; - }; + } /* end check */ - }; + } list_for_each_entry(feed, &demux->feed_list, list_head) { if ((feed->pid != pid) && (feed->pid != 0x2000)) diff --git a/drivers/media/dvb/dvb-core/dvb_demux.h b/drivers/media/dvb-core/dvb_demux.h similarity index 100% rename from drivers/media/dvb/dvb-core/dvb_demux.h rename to drivers/media/dvb-core/dvb_demux.h diff --git a/drivers/media/dvb/dvb-core/dvb_filter.c b/drivers/media/dvb-core/dvb_filter.c similarity index 100% rename from drivers/media/dvb/dvb-core/dvb_filter.c rename to drivers/media/dvb-core/dvb_filter.c diff --git a/drivers/media/dvb/dvb-core/dvb_filter.h b/drivers/media/dvb-core/dvb_filter.h similarity index 100% rename from drivers/media/dvb/dvb-core/dvb_filter.h rename to drivers/media/dvb-core/dvb_filter.h diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c similarity index 89% rename from drivers/media/dvb/dvb-core/dvb_frontend.c rename to drivers/media/dvb-core/dvb_frontend.c index aebcdf221ddacece9fd1413aa2c9906c836c88ba..8f58f241c10dfa7047f92423cb917c67d908f4b1 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb-core/dvb_frontend.c @@ -66,8 +66,6 @@ MODULE_PARM_DESC(dvb_powerdown_on_sleep, "0: do not power down, 1: turn LNB volt module_param(dvb_mfe_wait_time, int, 0644); MODULE_PARM_DESC(dvb_mfe_wait_time, "Wait up to seconds on open() for multi-frontend to become available (default:5 seconds)"); -#define dprintk if (dvb_frontend_debug) printk - #define FESTATE_IDLE 1 #define FESTATE_RETUNE 2 #define FESTATE_TUNING_FAST 4 @@ -179,7 +177,7 @@ static enum dvbv3_emulation_type dvbv3_type(u32 delivery_system) case SYS_DVBT: case SYS_DVBT2: case SYS_ISDBT: - case SYS_DMBTH: + case SYS_DTMB: return DVBV3_OFDM; case SYS_ATSC: case SYS_ATSCMH: @@ -207,7 +205,7 @@ static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status) struct dvb_frontend_event *e; int wp; - dprintk ("%s\n", __func__); + dev_dbg(fe->dvb->device, "%s:\n", __func__); if ((status & FE_HAS_LOCK) && has_get_frontend(fe)) dtv_get_frontend(fe, &fepriv->parameters_out); @@ -237,7 +235,7 @@ static int dvb_frontend_get_event(struct dvb_frontend *fe, struct dvb_frontend_private *fepriv = fe->frontend_priv; struct dvb_fe_events *events = &fepriv->events; - dprintk ("%s\n", __func__); + dev_dbg(fe->dvb->device, "%s:\n", __func__); if (events->overflow) { events->overflow = 0; @@ -282,10 +280,9 @@ static void dvb_frontend_clear_events(struct dvb_frontend *fe) static void dvb_frontend_init(struct dvb_frontend *fe) { - dprintk ("DVB: initialising adapter %i frontend %i (%s)...\n", - fe->dvb->num, - fe->id, - fe->ops.info.name); + dev_dbg(fe->dvb->device, + "%s: initialising adapter %i frontend %i (%s)...\n", + __func__, fe->dvb->num, fe->id, fe->ops.info.name); if (fe->ops.init) fe->ops.init(fe); @@ -310,8 +307,9 @@ EXPORT_SYMBOL(dvb_frontend_reinitialise); static void dvb_frontend_swzigzag_update_delay(struct dvb_frontend_private *fepriv, int locked) { int q2; + struct dvb_frontend *fe = fepriv->dvbdev->priv; - dprintk ("%s\n", __func__); + dev_dbg(fe->dvb->device, "%s:\n", __func__); if (locked) (fepriv->quality) = (fepriv->quality * 220 + 36*256) / 256; @@ -403,10 +401,11 @@ static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wra return 1; } - dprintk("%s: drift:%i inversion:%i auto_step:%i " - "auto_sub_step:%i started_auto_step:%i\n", - __func__, fepriv->lnb_drift, fepriv->inversion, - fepriv->auto_step, fepriv->auto_sub_step, fepriv->started_auto_step); + dev_dbg(fe->dvb->device, "%s: drift:%i inversion:%i auto_step:%i " \ + "auto_sub_step:%i started_auto_step:%i\n", + __func__, fepriv->lnb_drift, fepriv->inversion, + fepriv->auto_step, fepriv->auto_sub_step, + fepriv->started_auto_step); /* set the frontend itself */ c->frequency += fepriv->lnb_drift; @@ -605,7 +604,7 @@ static int dvb_frontend_thread(void *data) bool re_tune = false; - dprintk("%s\n", __func__); + dev_dbg(fe->dvb->device, "%s:\n", __func__); fepriv->check_wrapped = 0; fepriv->quality = 0; @@ -651,10 +650,10 @@ static int dvb_frontend_thread(void *data) algo = fe->ops.get_frontend_algo(fe); switch (algo) { case DVBFE_ALGO_HW: - dprintk("%s: Frontend ALGO = DVBFE_ALGO_HW\n", __func__); + dev_dbg(fe->dvb->device, "%s: Frontend ALGO = DVBFE_ALGO_HW\n", __func__); if (fepriv->state & FESTATE_RETUNE) { - dprintk("%s: Retune requested, FESTATE_RETUNE\n", __func__); + dev_dbg(fe->dvb->device, "%s: Retune requested, FESTATE_RETUNE\n", __func__); re_tune = true; fepriv->state = FESTATE_TUNED; } else { @@ -665,19 +664,19 @@ static int dvb_frontend_thread(void *data) fe->ops.tune(fe, re_tune, fepriv->tune_mode_flags, &fepriv->delay, &s); if (s != fepriv->status && !(fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT)) { - dprintk("%s: state changed, adding current state\n", __func__); + dev_dbg(fe->dvb->device, "%s: state changed, adding current state\n", __func__); dvb_frontend_add_event(fe, s); fepriv->status = s; } break; case DVBFE_ALGO_SW: - dprintk("%s: Frontend ALGO = DVBFE_ALGO_SW\n", __func__); + dev_dbg(fe->dvb->device, "%s: Frontend ALGO = DVBFE_ALGO_SW\n", __func__); dvb_frontend_swzigzag(fe); break; case DVBFE_ALGO_CUSTOM: - dprintk("%s: Frontend ALGO = DVBFE_ALGO_CUSTOM, state=%d\n", __func__, fepriv->state); + dev_dbg(fe->dvb->device, "%s: Frontend ALGO = DVBFE_ALGO_CUSTOM, state=%d\n", __func__, fepriv->state); if (fepriv->state & FESTATE_RETUNE) { - dprintk("%s: Retune requested, FESTAT_RETUNE\n", __func__); + dev_dbg(fe->dvb->device, "%s: Retune requested, FESTAT_RETUNE\n", __func__); fepriv->state = FESTATE_TUNED; } /* Case where we are going to search for a carrier @@ -713,7 +712,7 @@ static int dvb_frontend_thread(void *data) } break; default: - dprintk("%s: UNDEFINED ALGO !\n", __func__); + dev_dbg(fe->dvb->device, "%s: UNDEFINED ALGO !\n", __func__); break; } } else { @@ -750,7 +749,7 @@ static void dvb_frontend_stop(struct dvb_frontend *fe) { struct dvb_frontend_private *fepriv = fe->frontend_priv; - dprintk ("%s\n", __func__); + dev_dbg(fe->dvb->device, "%s:\n", __func__); fepriv->exit = DVB_FE_NORMAL_EXIT; mb(); @@ -765,7 +764,8 @@ static void dvb_frontend_stop(struct dvb_frontend *fe) /* paranoia check in case a signal arrived */ if (fepriv->thread) - printk("dvb_frontend_stop: warning: thread %p won't exit\n", + dev_warn(fe->dvb->device, + "dvb_frontend_stop: warning: thread %p won't exit\n", fepriv->thread); } @@ -818,7 +818,7 @@ static int dvb_frontend_start(struct dvb_frontend *fe) struct dvb_frontend_private *fepriv = fe->frontend_priv; struct task_struct *fe_thread; - dprintk ("%s\n", __func__); + dev_dbg(fe->dvb->device, "%s:\n", __func__); if (fepriv->thread) { if (fepriv->exit == DVB_FE_NO_EXIT) @@ -841,7 +841,9 @@ static int dvb_frontend_start(struct dvb_frontend *fe) "kdvb-ad-%i-fe-%i", fe->dvb->num,fe->id); if (IS_ERR(fe_thread)) { ret = PTR_ERR(fe_thread); - printk("dvb_frontend_start: failed to start kthread (%d)\n", ret); + dev_warn(fe->dvb->device, + "dvb_frontend_start: failed to start kthread (%d)\n", + ret); up(&fepriv->sem); return ret; } @@ -862,8 +864,8 @@ static void dvb_frontend_get_frequency_limits(struct dvb_frontend *fe, *freq_max = min(fe->ops.info.frequency_max, fe->ops.tuner_ops.info.frequency_max); if (*freq_min == 0 || *freq_max == 0) - printk(KERN_WARNING "DVB: adapter %i frontend %u frequency limits undefined - fix the driver\n", - fe->dvb->num,fe->id); + dev_warn(fe->dvb->device, "DVB: adapter %i frontend %u frequency limits undefined - fix the driver\n", + fe->dvb->num, fe->id); } static int dvb_frontend_check_parameters(struct dvb_frontend *fe) @@ -876,8 +878,9 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe) dvb_frontend_get_frequency_limits(fe, &freq_min, &freq_max); if ((freq_min && c->frequency < freq_min) || (freq_max && c->frequency > freq_max)) { - printk(KERN_WARNING "DVB: adapter %i frontend %i frequency %u out of range (%u..%u)\n", - fe->dvb->num, fe->id, c->frequency, freq_min, freq_max); + dev_warn(fe->dvb->device, "DVB: adapter %i frontend %i frequency %u out of range (%u..%u)\n", + fe->dvb->num, fe->id, c->frequency, + freq_min, freq_max); return -EINVAL; } @@ -892,10 +895,10 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe) c->symbol_rate < fe->ops.info.symbol_rate_min) || (fe->ops.info.symbol_rate_max && c->symbol_rate > fe->ops.info.symbol_rate_max)) { - printk(KERN_WARNING "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n", - fe->dvb->num, fe->id, c->symbol_rate, - fe->ops.info.symbol_rate_min, - fe->ops.info.symbol_rate_max); + dev_warn(fe->dvb->device, "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n", + fe->dvb->num, fe->id, c->symbol_rate, + fe->ops.info.symbol_rate_min, + fe->ops.info.symbol_rate_max); return -EINVAL; } default: @@ -917,8 +920,8 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe) c->state = DTV_CLEAR; - dprintk("%s() Clearing cache for delivery system %d\n", __func__, - c->delivery_system); + dev_dbg(fe->dvb->device, "%s: Clearing cache for delivery system %d\n", + __func__, c->delivery_system); c->transmission_mode = TRANSMISSION_MODE_AUTO; c->bandwidth_hz = 0; /* AUTO */ @@ -946,8 +949,7 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe) c->layer[i].segment_count = 0; } - c->isdbs_ts_id = 0; - c->dvbt2_plp_id = 0; + c->stream_id = NO_STREAM_ID_FILTER; switch (c->delivery_system) { case SYS_DVBS: @@ -997,6 +999,7 @@ static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = { _DTV_CMD(DTV_CODE_RATE_LP, 1, 0), _DTV_CMD(DTV_GUARD_INTERVAL, 1, 0), _DTV_CMD(DTV_TRANSMISSION_MODE, 1, 0), + _DTV_CMD(DTV_INTERLEAVING, 1, 0), _DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION, 1, 0), _DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING, 1, 0), @@ -1017,8 +1020,9 @@ static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = { _DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 1, 0), _DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 1, 0), - _DTV_CMD(DTV_ISDBS_TS_ID, 1, 0), - _DTV_CMD(DTV_DVBT2_PLP_ID, 1, 0), + _DTV_CMD(DTV_STREAM_ID, 1, 0), + _DTV_CMD(DTV_DVBT2_PLP_ID_LEGACY, 1, 0), + _DTV_CMD(DTV_LNA, 1, 0), /* Get */ _DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1), @@ -1028,6 +1032,7 @@ static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = { _DTV_CMD(DTV_GUARD_INTERVAL, 0, 0), _DTV_CMD(DTV_TRANSMISSION_MODE, 0, 0), _DTV_CMD(DTV_HIERARCHY, 0, 0), + _DTV_CMD(DTV_INTERLEAVING, 0, 0), _DTV_CMD(DTV_ENUM_DELSYS, 0, 0), @@ -1051,35 +1056,31 @@ static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = { _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_D, 0, 0), }; -static void dtv_property_dump(struct dtv_property *tvp) +static void dtv_property_dump(struct dvb_frontend *fe, struct dtv_property *tvp) { int i; if (tvp->cmd <= 0 || tvp->cmd > DTV_MAX_COMMAND) { - printk(KERN_WARNING "%s: tvp.cmd = 0x%08x undefined\n", - __func__, tvp->cmd); + dev_warn(fe->dvb->device, "%s: tvp.cmd = 0x%08x undefined\n", + __func__, tvp->cmd); return; } - dprintk("%s() tvp.cmd = 0x%08x (%s)\n" - ,__func__ - ,tvp->cmd - ,dtv_cmds[ tvp->cmd ].name); - - if(dtv_cmds[ tvp->cmd ].buffer) { + dev_dbg(fe->dvb->device, "%s: tvp.cmd = 0x%08x (%s)\n", __func__, + tvp->cmd, dtv_cmds[tvp->cmd].name); - dprintk("%s() tvp.u.buffer.len = 0x%02x\n" - ,__func__ - ,tvp->u.buffer.len); + if (dtv_cmds[tvp->cmd].buffer) { + dev_dbg(fe->dvb->device, "%s: tvp.u.buffer.len = 0x%02x\n", + __func__, tvp->u.buffer.len); for(i = 0; i < tvp->u.buffer.len; i++) - dprintk("%s() tvp.u.buffer.data[0x%02x] = 0x%02x\n" - ,__func__ - ,i - ,tvp->u.buffer.data[i]); - - } else - dprintk("%s() tvp.u.data = 0x%08x\n", __func__, tvp->u.data); + dev_dbg(fe->dvb->device, + "%s: tvp.u.buffer.data[0x%02x] = 0x%02x\n", + __func__, i, tvp->u.buffer.data[i]); + } else { + dev_dbg(fe->dvb->device, "%s: tvp.u.data = 0x%08x\n", __func__, + tvp->u.data); + } } /* Synchronise the legacy tuning parameters into the cache, so that demodulator @@ -1095,18 +1096,19 @@ static int dtv_property_cache_sync(struct dvb_frontend *fe, switch (dvbv3_type(c->delivery_system)) { case DVBV3_QPSK: - dprintk("%s() Preparing QPSK req\n", __func__); + dev_dbg(fe->dvb->device, "%s: Preparing QPSK req\n", __func__); c->symbol_rate = p->u.qpsk.symbol_rate; c->fec_inner = p->u.qpsk.fec_inner; break; case DVBV3_QAM: - dprintk("%s() Preparing QAM req\n", __func__); + dev_dbg(fe->dvb->device, "%s: Preparing QAM req\n", __func__); c->symbol_rate = p->u.qam.symbol_rate; c->fec_inner = p->u.qam.fec_inner; c->modulation = p->u.qam.modulation; break; case DVBV3_OFDM: - dprintk("%s() Preparing OFDM req\n", __func__); + dev_dbg(fe->dvb->device, "%s: Preparing OFDM req\n", __func__); + switch (p->u.ofdm.bandwidth) { case BANDWIDTH_10_MHZ: c->bandwidth_hz = 10000000; @@ -1138,7 +1140,7 @@ static int dtv_property_cache_sync(struct dvb_frontend *fe, c->hierarchy = p->u.ofdm.hierarchy_information; break; case DVBV3_ATSC: - dprintk("%s() Preparing ATSC req\n", __func__); + dev_dbg(fe->dvb->device, "%s: Preparing ATSC req\n", __func__); c->modulation = p->u.vsb.modulation; if (c->delivery_system == SYS_ATSCMH) break; @@ -1148,9 +1150,9 @@ static int dtv_property_cache_sync(struct dvb_frontend *fe, c->delivery_system = SYS_DVBC_ANNEX_B; break; case DVBV3_UNKNOWN: - printk(KERN_ERR - "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", - __func__, c->delivery_system); + dev_err(fe->dvb->device, + "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", + __func__, c->delivery_system); return -EINVAL; } @@ -1170,24 +1172,23 @@ static int dtv_property_legacy_params_sync(struct dvb_frontend *fe, switch (dvbv3_type(c->delivery_system)) { case DVBV3_UNKNOWN: - printk(KERN_ERR - "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", - __func__, c->delivery_system); + dev_err(fe->dvb->device, + "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", + __func__, c->delivery_system); return -EINVAL; case DVBV3_QPSK: - dprintk("%s() Preparing QPSK req\n", __func__); + dev_dbg(fe->dvb->device, "%s: Preparing QPSK req\n", __func__); p->u.qpsk.symbol_rate = c->symbol_rate; p->u.qpsk.fec_inner = c->fec_inner; break; case DVBV3_QAM: - dprintk("%s() Preparing QAM req\n", __func__); + dev_dbg(fe->dvb->device, "%s: Preparing QAM req\n", __func__); p->u.qam.symbol_rate = c->symbol_rate; p->u.qam.fec_inner = c->fec_inner; p->u.qam.modulation = c->modulation; break; case DVBV3_OFDM: - dprintk("%s() Preparing OFDM req\n", __func__); - + dev_dbg(fe->dvb->device, "%s: Preparing OFDM req\n", __func__); switch (c->bandwidth_hz) { case 10000000: p->u.ofdm.bandwidth = BANDWIDTH_10_MHZ; @@ -1219,7 +1220,7 @@ static int dtv_property_legacy_params_sync(struct dvb_frontend *fe, p->u.ofdm.hierarchy_information = c->hierarchy; break; case DVBV3_ATSC: - dprintk("%s() Preparing VSB req\n", __func__); + dev_dbg(fe->dvb->device, "%s: Preparing VSB req\n", __func__); p->u.vsb.modulation = c->modulation; break; } @@ -1326,6 +1327,9 @@ static int dtv_property_process_get(struct dvb_frontend *fe, case DTV_HIERARCHY: tvp->u.data = c->hierarchy; break; + case DTV_INTERLEAVING: + tvp->u.data = c->interleaving; + break; /* ISDB-T Support here */ case DTV_ISDBT_PARTIAL_RECEPTION: @@ -1382,11 +1386,11 @@ static int dtv_property_process_get(struct dvb_frontend *fe, case DTV_ISDBT_LAYERC_TIME_INTERLEAVING: tvp->u.data = c->layer[2].interleaving; break; - case DTV_ISDBS_TS_ID: - tvp->u.data = c->isdbs_ts_id; - break; - case DTV_DVBT2_PLP_ID: - tvp->u.data = c->dvbt2_plp_id; + + /* Multistream support */ + case DTV_STREAM_ID: + case DTV_DVBT2_PLP_ID_LEGACY: + tvp->u.data = c->stream_id; break; /* ATSC-MH */ @@ -1447,7 +1451,7 @@ static int dtv_property_process_get(struct dvb_frontend *fe, return r; } - dtv_property_dump(tvp); + dtv_property_dump(fe, tvp); return 0; } @@ -1492,8 +1496,9 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) * DVBv3 system that matches the delivery system. */ if (is_dvbv3_delsys(c->delivery_system)) { - dprintk("%s() Using delivery system to %d\n", - __func__, c->delivery_system); + dev_dbg(fe->dvb->device, + "%s: Using delivery system to %d\n", + __func__, c->delivery_system); return 0; } type = dvbv3_type(c->delivery_system); @@ -1511,8 +1516,8 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) desired_system = SYS_DVBT; break; default: - dprintk("%s(): This frontend doesn't support DVBv3 calls\n", - __func__); + dev_dbg(fe->dvb->device, "%s: This frontend doesn't support DVBv3 calls\n", + __func__); return -EINVAL; } /* @@ -1534,8 +1539,8 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) ncaps++; } if (delsys == SYS_UNDEFINED) { - dprintk("%s() Couldn't find a delivery system that matches %d\n", - __func__, desired_system); + dev_dbg(fe->dvb->device, "%s: Couldn't find a delivery system that matches %d\n", + __func__, desired_system); } } else { /* @@ -1548,8 +1553,9 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) { if (fe->ops.delsys[ncaps] == desired_system) { c->delivery_system = desired_system; - dprintk("%s() Changing delivery system to %d\n", - __func__, desired_system); + dev_dbg(fe->dvb->device, + "%s: Changing delivery system to %d\n", + __func__, desired_system); return 0; } ncaps++; @@ -1563,8 +1569,9 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) * DVBv3 delivery systems */ if (!is_dvbv3_delsys(desired_system)) { - dprintk("%s() can't use a DVBv3 FE_SET_FRONTEND call on this frontend\n", - __func__); + dev_dbg(fe->dvb->device, + "%s: can't use a DVBv3 FE_SET_FRONTEND call on this frontend\n", + __func__); return -EINVAL; } @@ -1581,8 +1588,9 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) } /* There's nothing compatible with the desired delivery system */ if (delsys == SYS_UNDEFINED) { - dprintk("%s() Incompatible DVBv3 FE_SET_FRONTEND call for this frontend\n", - __func__); + dev_dbg(fe->dvb->device, + "%s: Incompatible DVBv3 FE_SET_FRONTEND call for this frontend\n", + __func__); return -EINVAL; } } @@ -1593,13 +1601,14 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) * The DVBv3 or DVBv5 call is requesting a different system. So, * emulation is needed. * - * Emulate newer delivery systems like ISDBT, DVBT and DMBTH + * Emulate newer delivery systems like ISDBT, DVBT and DTMB * for older DVBv5 applications. The emulation will try to use * the auto mode for most things, and will assume that the desired * delivery system is the last one at the ops.delsys[] array */ - dprintk("%s() Using delivery system %d emulated as if it were a %d\n", - __func__, delsys, desired_system); + dev_dbg(fe->dvb->device, + "%s: Using delivery system %d emulated as if it were a %d\n", + __func__, delsys, desired_system); /* * For now, handles ISDB-T calls. More code may be needed here for the @@ -1607,8 +1616,10 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) */ if (type == DVBV3_OFDM) { if (c->delivery_system == SYS_ISDBT) { - dprintk("%s() Using defaults for SYS_ISDBT\n", - __func__); + dev_dbg(fe->dvb->device, + "%s: Using defaults for SYS_ISDBT\n", + __func__); + if (!c->bandwidth_hz) c->bandwidth_hz = 6000000; @@ -1626,7 +1637,8 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) } } } - dprintk("change delivery system on cache to %d\n", c->delivery_system); + dev_dbg(fe->dvb->device, "%s: change delivery system on cache to %d\n", + __func__, c->delivery_system); return 0; } @@ -1659,7 +1671,8 @@ static int dtv_property_process_set(struct dvb_frontend *fe, * ioctl. */ c->state = tvp->cmd; - dprintk("%s() Finalised property cache\n", __func__); + dev_dbg(fe->dvb->device, "%s: Finalised property cache\n", + __func__); r = dtv_set_frontend(fe); break; @@ -1715,6 +1728,13 @@ static int dtv_property_process_set(struct dvb_frontend *fe, case DTV_HIERARCHY: c->hierarchy = tvp->u.data; break; + case DTV_INTERLEAVING: + c->interleaving = tvp->u.data; + break; + case DTV_LNA: + if (fe->ops.set_lna) + r = fe->ops.set_lna(fe, tvp->u.data); + break; /* ISDB-T Support here */ case DTV_ISDBT_PARTIAL_RECEPTION: @@ -1771,11 +1791,11 @@ static int dtv_property_process_set(struct dvb_frontend *fe, case DTV_ISDBT_LAYERC_TIME_INTERLEAVING: c->layer[2].interleaving = tvp->u.data; break; - case DTV_ISDBS_TS_ID: - c->isdbs_ts_id = tvp->u.data; - break; - case DTV_DVBT2_PLP_ID: - c->dvbt2_plp_id = tvp->u.data; + + /* Multistream support */ + case DTV_STREAM_ID: + case DTV_DVBT2_PLP_ID_LEGACY: + c->stream_id = tvp->u.data; break; /* ATSC-MH */ @@ -1800,10 +1820,9 @@ static int dvb_frontend_ioctl(struct file *file, struct dvb_frontend *fe = dvbdev->priv; struct dtv_frontend_properties *c = &fe->dtv_property_cache; struct dvb_frontend_private *fepriv = fe->frontend_priv; - int err = -EOPNOTSUPP; - - dprintk("%s (%d)\n", __func__, _IOC_NR(cmd)); + int err = -ENOTTY; + dev_dbg(fe->dvb->device, "%s: (%d)\n", __func__, _IOC_NR(cmd)); if (fepriv->exit != DVB_FE_NO_EXIT) return -ENODEV; @@ -1839,13 +1858,13 @@ static int dvb_frontend_ioctl_properties(struct file *file, struct dtv_property *tvp = NULL; int i; - dprintk("%s\n", __func__); + dev_dbg(fe->dvb->device, "%s:\n", __func__); if(cmd == FE_SET_PROPERTY) { tvps = (struct dtv_properties __user *)parg; - dprintk("%s() properties.num = %d\n", __func__, tvps->num); - dprintk("%s() properties.props = %p\n", __func__, tvps->props); + dev_dbg(fe->dvb->device, "%s: properties.num = %d\n", __func__, tvps->num); + dev_dbg(fe->dvb->device, "%s: properties.props = %p\n", __func__, tvps->props); /* Put an arbitrary limit on the number of messages that can * be sent at once */ @@ -1871,14 +1890,14 @@ static int dvb_frontend_ioctl_properties(struct file *file, } if (c->state == DTV_TUNE) - dprintk("%s() Property cache is full, tuning\n", __func__); + dev_dbg(fe->dvb->device, "%s: Property cache is full, tuning\n", __func__); } else if(cmd == FE_GET_PROPERTY) { tvps = (struct dtv_properties __user *)parg; - dprintk("%s() properties.num = %d\n", __func__, tvps->num); - dprintk("%s() properties.props = %p\n", __func__, tvps->props); + dev_dbg(fe->dvb->device, "%s: properties.num = %d\n", __func__, tvps->num); + dev_dbg(fe->dvb->device, "%s: properties.props = %p\n", __func__, tvps->props); /* Put an arbitrary limit on the number of messages that can * be sent at once */ @@ -1919,7 +1938,7 @@ static int dvb_frontend_ioctl_properties(struct file *file, } } else - err = -EOPNOTSUPP; + err = -ENOTTY; out: kfree(tvp); @@ -2012,7 +2031,7 @@ static int dtv_set_frontend(struct dvb_frontend *fe) case SYS_DVBT: case SYS_DVBT2: case SYS_ISDBT: - case SYS_DMBTH: + case SYS_DTMB: fepriv->min_delay = HZ / 20; fepriv->step_size = fe->ops.info.frequency_stepsize * 2; fepriv->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; @@ -2052,18 +2071,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file, struct dvb_frontend *fe = dvbdev->priv; struct dvb_frontend_private *fepriv = fe->frontend_priv; struct dtv_frontend_properties *c = &fe->dtv_property_cache; - int cb_err, err = -EOPNOTSUPP; - - if (fe->dvb->fe_ioctl_override) { - cb_err = fe->dvb->fe_ioctl_override(fe, cmd, parg, - DVB_FE_IOCTL_PRE); - if (cb_err < 0) - return cb_err; - if (cb_err > 0) - return 0; - /* fe_ioctl_override returning 0 allows - * dvb-core to continue handling the ioctl */ - } + int err = -ENOTTY; switch (cmd) { case FE_GET_INFO: { @@ -2097,13 +2105,13 @@ static int dvb_frontend_ioctl_legacy(struct file *file, info->type = FE_OFDM; break; default: - printk(KERN_ERR - "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", - __func__, c->delivery_system); + dev_err(fe->dvb->device, + "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", + __func__, c->delivery_system); fe->ops.info.type = FE_OFDM; } - dprintk("current delivery system on cache: %d, V3 type: %d\n", - c->delivery_system, fe->ops.info.type); + dev_dbg(fe->dvb->device, "%s: current delivery system on cache: %d, V3 type: %d\n", + __func__, c->delivery_system, fe->ops.info.type); /* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't * do it, it is done for it. */ @@ -2128,27 +2136,43 @@ static int dvb_frontend_ioctl_legacy(struct file *file, err = fe->ops.read_status(fe, status); break; } + case FE_READ_BER: - if (fe->ops.read_ber) - err = fe->ops.read_ber(fe, (__u32*) parg); + if (fe->ops.read_ber) { + if (fepriv->thread) + err = fe->ops.read_ber(fe, (__u32 *) parg); + else + err = -EAGAIN; + } break; case FE_READ_SIGNAL_STRENGTH: - if (fe->ops.read_signal_strength) - err = fe->ops.read_signal_strength(fe, (__u16*) parg); + if (fe->ops.read_signal_strength) { + if (fepriv->thread) + err = fe->ops.read_signal_strength(fe, (__u16 *) parg); + else + err = -EAGAIN; + } break; case FE_READ_SNR: - if (fe->ops.read_snr) - err = fe->ops.read_snr(fe, (__u16*) parg); + if (fe->ops.read_snr) { + if (fepriv->thread) + err = fe->ops.read_snr(fe, (__u16 *) parg); + else + err = -EAGAIN; + } break; case FE_READ_UNCORRECTED_BLOCKS: - if (fe->ops.read_ucblocks) - err = fe->ops.read_ucblocks(fe, (__u32*) parg); + if (fe->ops.read_ucblocks) { + if (fepriv->thread) + err = fe->ops.read_ucblocks(fe, (__u32 *) parg); + else + err = -EAGAIN; + } break; - case FE_DISEQC_RESET_OVERLOAD: if (fe->ops.diseqc_reset_overload) { err = fe->ops.diseqc_reset_overload(fe); @@ -2287,13 +2311,6 @@ static int dvb_frontend_ioctl_legacy(struct file *file, break; }; - if (fe->dvb->fe_ioctl_override) { - cb_err = fe->dvb->fe_ioctl_override(fe, cmd, parg, - DVB_FE_IOCTL_POST); - if (cb_err < 0) - return cb_err; - } - return err; } @@ -2304,7 +2321,7 @@ static unsigned int dvb_frontend_poll(struct file *file, struct poll_table_struc struct dvb_frontend *fe = dvbdev->priv; struct dvb_frontend_private *fepriv = fe->frontend_priv; - dprintk ("%s\n", __func__); + dev_dbg_ratelimited(fe->dvb->device, "%s:\n", __func__); poll_wait (file, &fepriv->events.wait_queue, wait); @@ -2322,7 +2339,7 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) struct dvb_adapter *adapter = fe->dvb; int ret; - dprintk ("%s\n", __func__); + dev_dbg(fe->dvb->device, "%s:\n", __func__); if (fepriv->exit == DVB_FE_DEVICE_REMOVED) return -ENODEV; @@ -2417,7 +2434,7 @@ static int dvb_frontend_release(struct inode *inode, struct file *file) struct dvb_frontend_private *fepriv = fe->frontend_priv; int ret; - dprintk ("%s\n", __func__); + dev_dbg(fe->dvb->device, "%s:\n", __func__); if ((file->f_flags & O_ACCMODE) != O_RDONLY) { fepriv->release_jiffies = jiffies; @@ -2449,6 +2466,44 @@ static const struct file_operations dvb_frontend_fops = { .llseek = noop_llseek, }; +int dvb_frontend_suspend(struct dvb_frontend *fe) +{ + int ret = 0; + + dev_dbg(fe->dvb->device, "%s: adap=%d fe=%d\n", __func__, fe->dvb->num, + fe->id); + + if (fe->ops.tuner_ops.sleep) + ret = fe->ops.tuner_ops.sleep(fe); + + if (fe->ops.sleep) + ret = fe->ops.sleep(fe); + + return ret; +} +EXPORT_SYMBOL(dvb_frontend_suspend); + +int dvb_frontend_resume(struct dvb_frontend *fe) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + int ret = 0; + + dev_dbg(fe->dvb->device, "%s: adap=%d fe=%d\n", __func__, fe->dvb->num, + fe->id); + + if (fe->ops.init) + ret = fe->ops.init(fe); + + if (fe->ops.tuner_ops.init) + ret = fe->ops.tuner_ops.init(fe); + + fepriv->state = FESTATE_RETUNE; + dvb_frontend_wakeup(fe); + + return ret; +} +EXPORT_SYMBOL(dvb_frontend_resume); + int dvb_register_frontend(struct dvb_adapter* dvb, struct dvb_frontend* fe) { @@ -2461,7 +2516,7 @@ int dvb_register_frontend(struct dvb_adapter* dvb, .kernel_ioctl = dvb_frontend_ioctl }; - dprintk ("%s\n", __func__); + dev_dbg(dvb->device, "%s:\n", __func__); if (mutex_lock_interruptible(&frontend_mutex)) return -ERESTARTSYS; @@ -2480,10 +2535,9 @@ int dvb_register_frontend(struct dvb_adapter* dvb, fe->dvb = dvb; fepriv->inversion = INVERSION_OFF; - printk ("DVB: registering adapter %i frontend %i (%s)...\n", - fe->dvb->num, - fe->id, - fe->ops.info.name); + dev_info(fe->dvb->device, + "DVB: registering adapter %i frontend %i (%s)...\n", + fe->dvb->num, fe->id, fe->ops.info.name); dvb_register_device (fe->dvb, &fepriv->dvbdev, &dvbdev_template, fe, DVB_DEVICE_FRONTEND); @@ -2504,7 +2558,7 @@ EXPORT_SYMBOL(dvb_register_frontend); int dvb_unregister_frontend(struct dvb_frontend* fe) { struct dvb_frontend_private *fepriv = fe->frontend_priv; - dprintk ("%s\n", __func__); + dev_dbg(fe->dvb->device, "%s:\n", __func__); mutex_lock(&frontend_mutex); dvb_frontend_stop (fe); diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb-core/dvb_frontend.h similarity index 98% rename from drivers/media/dvb/dvb-core/dvb_frontend.h rename to drivers/media/dvb-core/dvb_frontend.h index 7c64c09103a94d1e15f7b57c32ae21da4720e716..44a445cee74f53b2fe5aa010323bd09308f293b1 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb-core/dvb_frontend.h @@ -303,6 +303,7 @@ struct dvb_frontend_ops { int (*dishnetwork_send_legacy_command)(struct dvb_frontend* fe, unsigned long cmd); int (*i2c_gate_ctrl)(struct dvb_frontend* fe, int enable); int (*ts_bus_ctrl)(struct dvb_frontend* fe, int acquire); + int (*set_lna)(struct dvb_frontend *, int); /* These callbacks are for devices that implement their own * tuning algorithms, rather than a simple swzigzag @@ -354,6 +355,8 @@ struct dtv_frontend_properties { fe_delivery_system_t delivery_system; + enum fe_interleaving interleaving; + /* ISDB-T specifics */ u8 isdbt_partial_reception; u8 isdbt_sb_mode; @@ -368,11 +371,8 @@ struct dtv_frontend_properties { u8 interleaving; } layer[3]; - /* ISDB-T specifics */ - u32 isdbs_ts_id; - - /* DVB-T2 specifics */ - u32 dvbt2_plp_id; + /* Multistream specifics */ + u32 stream_id; /* ATSC-MH specifics */ u8 atscmh_fic_ver; @@ -416,6 +416,8 @@ extern int dvb_unregister_frontend(struct dvb_frontend *fe); extern void dvb_frontend_detach(struct dvb_frontend *fe); extern void dvb_frontend_reinitialise(struct dvb_frontend *fe); +extern int dvb_frontend_suspend(struct dvb_frontend *fe); +extern int dvb_frontend_resume(struct dvb_frontend *fe); extern void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec); extern s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime); diff --git a/drivers/media/dvb/dvb-core/dvb_math.c b/drivers/media/dvb-core/dvb_math.c similarity index 100% rename from drivers/media/dvb/dvb-core/dvb_math.c rename to drivers/media/dvb-core/dvb_math.c diff --git a/drivers/media/dvb/dvb-core/dvb_math.h b/drivers/media/dvb-core/dvb_math.h similarity index 100% rename from drivers/media/dvb/dvb-core/dvb_math.h rename to drivers/media/dvb-core/dvb_math.h diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c similarity index 100% rename from drivers/media/dvb/dvb-core/dvb_net.c rename to drivers/media/dvb-core/dvb_net.c diff --git a/drivers/media/dvb/dvb-core/dvb_net.h b/drivers/media/dvb-core/dvb_net.h similarity index 100% rename from drivers/media/dvb/dvb-core/dvb_net.h rename to drivers/media/dvb-core/dvb_net.h diff --git a/drivers/media/dvb/dvb-core/dvb_ringbuffer.c b/drivers/media/dvb-core/dvb_ringbuffer.c similarity index 100% rename from drivers/media/dvb/dvb-core/dvb_ringbuffer.c rename to drivers/media/dvb-core/dvb_ringbuffer.c diff --git a/drivers/media/dvb/dvb-core/dvb_ringbuffer.h b/drivers/media/dvb-core/dvb_ringbuffer.h similarity index 100% rename from drivers/media/dvb/dvb-core/dvb_ringbuffer.h rename to drivers/media/dvb-core/dvb_ringbuffer.h diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c similarity index 99% rename from drivers/media/dvb/dvb-core/dvbdev.c rename to drivers/media/dvb-core/dvbdev.c index 39eab73b01ae9bb5e0a9c4d9667e3c99b4b51415..d33101aaf0b5e6bb51e55baef9b21ba0d53c4e9a 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.c +++ b/drivers/media/dvb-core/dvbdev.c @@ -420,7 +420,7 @@ int dvb_usercopy(struct file *file, /* call driver */ mutex_lock(&dvbdev_mutex); if ((err = func(file, cmd, parg)) == -ENOIOCTLCMD) - err = -EINVAL; + err = -ENOTTY; mutex_unlock(&dvbdev_mutex); if (err < 0) diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb-core/dvbdev.h similarity index 80% rename from drivers/media/dvb/dvb-core/dvbdev.h rename to drivers/media/dvb-core/dvbdev.h index fcc6ae98745e018588d21d83af953c6765aad85c..93a9470d3f0c7c19d3d9391bdc37a27ac66a7e6e 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.h +++ b/drivers/media/dvb-core/dvbdev.h @@ -71,32 +71,6 @@ struct dvb_adapter { int mfe_shared; /* indicates mutually exclusive frontends */ struct dvb_device *mfe_dvbdev; /* frontend device in use */ struct mutex mfe_lock; /* access lock for thread creation */ - - /* Allow the adapter/bridge driver to perform an action before and/or - * after the core handles an ioctl: - * - * DVB_FE_IOCTL_PRE indicates that the ioctl has not yet been handled. - * DVB_FE_IOCTL_POST indicates that the ioctl has been handled. - * - * When DVB_FE_IOCTL_PRE is passed to the callback as the stage arg: - * - * return 0 to allow dvb-core to handle the ioctl. - * return a positive int to prevent dvb-core from handling the ioctl, - * and exit without error. - * return a negative int to prevent dvb-core from handling the ioctl, - * and return that value as an error. - * - * When DVB_FE_IOCTL_POST is passed to the callback as the stage arg: - * - * return 0 to allow the dvb_frontend ioctl handler to exit normally. - * return a negative int to cause the dvb_frontend ioctl handler to - * return that value as an error. - */ -#define DVB_FE_IOCTL_PRE 0 -#define DVB_FE_IOCTL_POST 1 - int (*fe_ioctl_override)(struct dvb_frontend *fe, - unsigned int cmd, void *parg, - unsigned int stage); }; diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig similarity index 83% rename from drivers/media/dvb/frontends/Kconfig rename to drivers/media/dvb-frontends/Kconfig index a08c2152d0eeb98c591278731f140a02cc244b03..5efec73a32d28893f04f48b5e9f0be1e99b39aea 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb-frontends/Kconfig @@ -1,20 +1,5 @@ -config DVB_FE_CUSTOMISE - bool "Customise the frontend modules to build" - depends on DVB_CORE - depends on EXPERT - default y if EXPERT - help - This allows the user to select/deselect frontend drivers for their - hardware from the build. - - Use this option with care as deselecting frontends which are in fact - necessary will result in DVB devices which cannot be tuned due to lack - of driver support. - - If unsure say N. - menu "Customise DVB Frontends" - visible if DVB_FE_CUSTOMISE + visible if !MEDIA_SUBDRV_AUTOSELECT comment "Multistandard (satellite) frontends" depends on DVB_CORE @@ -22,7 +7,7 @@ comment "Multistandard (satellite) frontends" config DVB_STB0899 tristate "STB0899 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S/S2/DSS Multistandard demodulator. Say Y when you want to support this demodulator based frontends @@ -30,7 +15,7 @@ config DVB_STB0899 config DVB_STB6100 tristate "STB6100 based tuners" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A Silicon tuner from ST used in conjunction with the STB0899 demodulator. Say Y when you want to support this tuner. @@ -38,7 +23,7 @@ config DVB_STB6100 config DVB_STV090x tristate "STV0900/STV0903(A/B) based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help DVB-S/S2/DSS Multistandard Professional/Broadcast demodulators. Say Y when you want to support these frontends. @@ -46,7 +31,7 @@ config DVB_STV090x config DVB_STV6110x tristate "STV6110/(A) based tuners" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A Silicon tuner that supports DVB-S and DVB-S2 modes @@ -56,7 +41,7 @@ comment "Multistandard (cable + terrestrial) frontends" config DVB_DRXK tristate "Micronas DRXK based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Micronas DRX-K DVB-C/T demodulator. @@ -65,7 +50,7 @@ config DVB_DRXK config DVB_TDA18271C2DD tristate "NXP TDA18271C2 silicon tuner" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help NXP TDA18271 silicon tuner. @@ -77,119 +62,119 @@ comment "DVB-S (satellite) frontends" config DVB_CX24110 tristate "Conexant CX24110 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_CX24123 tristate "Conexant CX24123 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_MT312 tristate "Zarlink VP310/MT312/ZL10313 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_ZL10036 tristate "Zarlink ZL10036 silicon tuner" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_ZL10039 tristate "Zarlink ZL10039 silicon tuner" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_S5H1420 tristate "Samsung S5H1420 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_STV0288 tristate "ST STV0288 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_STB6000 tristate "ST STB6000 silicon tuner" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S silicon tuner module. Say Y when you want to support this tuner. config DVB_STV0299 tristate "ST STV0299 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_STV6110 tristate "ST STV6110 silicon tuner" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S silicon tuner module. Say Y when you want to support this tuner. config DVB_STV0900 tristate "ST STV0900 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S/S2 demodulator. Say Y when you want to support this frontend. config DVB_TDA8083 tristate "Philips TDA8083 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_TDA10086 tristate "Philips TDA10086 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_TDA8261 tristate "Philips TDA8261 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_VES1X93 tristate "VLSI VES1893 or VES1993 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_TUNER_ITD1000 tristate "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_TUNER_CX24113 tristate "Conexant CX24113/CX24128 tuner for DVB-S/DSS" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. @@ -197,42 +182,42 @@ config DVB_TUNER_CX24113 config DVB_TDA826X tristate "Philips TDA826X silicon tuner" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S silicon tuner module. Say Y when you want to support this tuner. config DVB_TUA6100 tristate "Infineon TUA6100 PLL" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S PLL chip. config DVB_CX24116 tristate "Conexant CX24116 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S/S2 tuner module. Say Y when you want to support this frontend. config DVB_SI21XX tristate "Silicon Labs SI21XX based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_DS3000 tristate "Montage Tehnology DS3000 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S/S2 tuner module. Say Y when you want to support this frontend. config DVB_MB86A16 tristate "Fujitsu MB86A16 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S/DSS Direct Conversion reveiver. Say Y when you want to support this frontend. @@ -240,7 +225,7 @@ config DVB_MB86A16 config DVB_TDA10071 tristate "NXP TDA10071" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y when you want to support this frontend. @@ -250,7 +235,7 @@ comment "DVB-T (terrestrial) frontends" config DVB_SP8870 tristate "Spase sp8870 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. @@ -262,7 +247,7 @@ config DVB_SP8870 config DVB_SP887X tristate "Spase sp887x based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. @@ -274,28 +259,28 @@ config DVB_SP887X config DVB_CX22700 tristate "Conexant CX22700 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_CX22702 tristate "Conexant cx22702 demodulator (OFDM)" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_S5H1432 tristate "Samsung s5h1432 demodulator (OFDM)" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_DRXD tristate "Micronas DRXD driver" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. @@ -306,14 +291,14 @@ config DVB_DRXD config DVB_L64781 tristate "LSI L64781" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_TDA1004X tristate "Philips TDA10045H/TDA10046H based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. @@ -326,28 +311,28 @@ config DVB_TDA1004X config DVB_NXT6000 tristate "NxtWave Communications NXT6000 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_MT352 tristate "Zarlink MT352 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_ZL10353 tristate "Zarlink ZL10353 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_DIB3000MB tristate "DiBcom 3000M-B" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Designed for mobile usage. Say Y when you want to support this frontend. @@ -355,7 +340,7 @@ config DVB_DIB3000MB config DVB_DIB3000MC tristate "DiBcom 3000P/M-C" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Designed for mobile usage. Say Y when you want to support this frontend. @@ -363,7 +348,7 @@ config DVB_DIB3000MC config DVB_DIB7000M tristate "DiBcom 7000MA/MB/PA/PB/MC" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Designed for mobile usage. Say Y when you want to support this frontend. @@ -371,7 +356,7 @@ config DVB_DIB7000M config DVB_DIB7000P tristate "DiBcom 7000PC" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Designed for mobile usage. Say Y when you want to support this frontend. @@ -379,7 +364,7 @@ config DVB_DIB7000P config DVB_DIB9000 tristate "DiBcom 9000" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Designed for mobile usage. Say Y when you want to support this frontend. @@ -387,56 +372,56 @@ config DVB_DIB9000 config DVB_TDA10048 tristate "Philips TDA10048HN based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_AF9013 tristate "Afatech AF9013 demodulator" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y when you want to support this frontend. config DVB_EC100 tristate "E3C EC100" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y when you want to support this frontend. config DVB_HD29L2 tristate "HDIC HD29L2" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y when you want to support this frontend. config DVB_STV0367 tristate "ST STV0367 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T/C tuner module. Say Y when you want to support this frontend. config DVB_CXD2820R tristate "Sony CXD2820R" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y when you want to support this frontend. config DVB_RTL2830 tristate "Realtek RTL2830 DVB-T" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y when you want to support this frontend. config DVB_RTL2832 tristate "Realtek RTL2832 DVB-T" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y when you want to support this frontend. @@ -446,28 +431,28 @@ comment "DVB-C (cable) frontends" config DVB_VES1820 tristate "VLSI VES1820 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-C tuner module. Say Y when you want to support this frontend. config DVB_TDA10021 tristate "Philips TDA10021 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-C tuner module. Say Y when you want to support this frontend. config DVB_TDA10023 tristate "Philips TDA10023 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-C tuner module. Say Y when you want to support this frontend. config DVB_STV0297 tristate "ST STV0297 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-C tuner module. Say Y when you want to support this frontend. @@ -477,7 +462,7 @@ comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends" config DVB_NXT200X tristate "NxtWave Communications NXT2002/NXT2004 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. @@ -491,7 +476,7 @@ config DVB_NXT200X config DVB_OR51211 tristate "Oren OR51211 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An ATSC 8VSB tuner module. Say Y when you want to support this frontend. @@ -503,7 +488,7 @@ config DVB_OR51211 config DVB_OR51132 tristate "Oren OR51132 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. @@ -518,7 +503,7 @@ config DVB_OR51132 config DVB_BCM3510 tristate "Broadcom BCM3510" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. @@ -526,7 +511,7 @@ config DVB_BCM3510 config DVB_LGDT330X tristate "LG Electronics LGDT3302/LGDT3303 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. @@ -534,7 +519,7 @@ config DVB_LGDT330X config DVB_LGDT3305 tristate "LG Electronics LGDT3304 and LGDT3305 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. @@ -542,7 +527,7 @@ config DVB_LGDT3305 config DVB_LG2160 tristate "LG Electronics LG216x based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An ATSC/MH demodulator module. Say Y when you want to support this frontend. @@ -550,7 +535,7 @@ config DVB_LG2160 config DVB_S5H1409 tristate "Samsung S5H1409 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. @@ -563,7 +548,7 @@ config DVB_AU8522_DTV tristate "Auvitek AU8522 based DTV demod" depends on DVB_CORE && I2C select DVB_AU8522 - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when you want to enable DTV demodulation support for this frontend. @@ -572,7 +557,7 @@ config DVB_AU8522_V4L tristate "Auvitek AU8522 based ATV demod" depends on VIDEO_V4L2 && I2C select DVB_AU8522 - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when you want to enable ATV demodulation support for this frontend. @@ -580,7 +565,7 @@ config DVB_AU8522_V4L config DVB_S5H1411 tristate "Samsung S5H1411 based" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. @@ -591,7 +576,7 @@ comment "ISDB-T (terrestrial) frontends" config DVB_S921 tristate "Sharp S921 frontend" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help AN ISDB-T DQPSK, QPSK, 16QAM and 64QAM 1seg tuner module. Say Y when you want to support this frontend. @@ -599,7 +584,7 @@ config DVB_S921 config DVB_DIB8000 tristate "DiBcom 8000MB/MC" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for DiBcom's DiB8000 ISDB-T/ISDB-Tsb demodulator. Say Y when you want to support this frontend. @@ -607,7 +592,7 @@ config DVB_DIB8000 config DVB_MB86A20S tristate "Fujitsu mb86a20s" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for Fujitsu mb86a20s ISDB-T/ISDB-Tsb demodulator. Say Y when you want to support this frontend. @@ -618,7 +603,7 @@ comment "Digital terrestrial only tuners/PLL" config DVB_PLL tristate "Generic I2C PLL based tuners" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help This module drives a number of tuners based on PLL chips with a common I2C interface. Say Y when you want to support these tuners. @@ -626,7 +611,7 @@ config DVB_PLL config DVB_TUNER_DIB0070 tristate "DiBcom DiB0070 silicon base-band tuner" depends on I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for the silicon baseband tuner DiB0070 from DiBcom. This device is only used inside a SiP called together with a @@ -635,7 +620,7 @@ config DVB_TUNER_DIB0070 config DVB_TUNER_DIB0090 tristate "DiBcom DiB0090 silicon base-band tuner" depends on I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for the silicon baseband tuner DiB0090 from DiBcom. This device is only used inside a SiP called together with a @@ -647,14 +632,14 @@ comment "SEC control devices for DVB-S" config DVB_LNBP21 tristate "LNBP21/LNBH24 SEC controllers" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An SEC control chips. config DVB_LNBP22 tristate "LNBP22 SEC controllers" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help LNB power supply and control voltage regulator chip with step-up converter @@ -664,33 +649,33 @@ config DVB_LNBP22 config DVB_ISL6405 tristate "ISL6405 SEC controller" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An SEC control chip. config DVB_ISL6421 tristate "ISL6421 SEC controller" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help An SEC control chip. config DVB_ISL6423 tristate "ISL6423 SEC controller" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A SEC controller chip from Intersil config DVB_A8293 tristate "Allegro A8293" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT config DVB_LGS8GL5 tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DMB-TH tuner module. Say Y when you want to support this frontend. @@ -698,21 +683,21 @@ config DVB_LGS8GXX tristate "Legend Silicon LGS8913/LGS8GL5/LGS8GXX DMB-TH demodulator" depends on DVB_CORE && I2C select FW_LOADER - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DMB-TH tuner module. Say Y when you want to support this frontend. config DVB_ATBM8830 tristate "AltoBeam ATBM8830/8831 DMB-TH demodulator" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DMB-TH tuner module. Say Y when you want to support this frontend. config DVB_TDA665x tristate "TDA665x tuner" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Support for tuner modules based on Philips TDA6650/TDA6651 chips. Say Y when you want to support this chip. @@ -723,14 +708,14 @@ config DVB_TDA665x config DVB_IX2505V tristate "Sharp IX2505V silicon tuner" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_IT913X_FE tristate "it913x frontend and it9137 tuner" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T tuner module. Say Y when you want to support this frontend. @@ -738,7 +723,7 @@ config DVB_IT913X_FE config DVB_M88RS2000 tristate "M88RS2000 DVB-S demodulator and tuner" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-S tuner module. Say Y when you want to support this frontend. @@ -746,7 +731,7 @@ config DVB_M88RS2000 config DVB_AF9033 tristate "Afatech AF9033 DVB-T demodulator" depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT comment "Tools to develop new frontends" diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb-frontends/Makefile similarity index 92% rename from drivers/media/dvb/frontends/Makefile rename to drivers/media/dvb-frontends/Makefile index 185bb8b51952ec0190aa4a35c2c0bd0cbfbef42e..7eb73bbd2e26b631fdb45dcd27edf28b24132652 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb-frontends/Makefile @@ -2,13 +2,13 @@ # Makefile for the kernel DVB frontend device drivers. # -ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core/ -ccflags-y += -I$(srctree)/drivers/media/common/tuners/ +ccflags-y += -I$(srctree)/drivers/media/dvb-core/ +ccflags-y += -I$(srctree)/drivers/media/tuners/ -stb0899-objs = stb0899_drv.o stb0899_algo.o -stv0900-objs = stv0900_core.o stv0900_sw.o -drxd-objs = drxd_firm.o drxd_hard.o -cxd2820r-objs = cxd2820r_core.o cxd2820r_c.o cxd2820r_t.o cxd2820r_t2.o +stb0899-objs := stb0899_drv.o stb0899_algo.o +stv0900-objs := stv0900_core.o stv0900_sw.o +drxd-objs := drxd_firm.o drxd_hard.o +cxd2820r-objs := cxd2820r_core.o cxd2820r_c.o cxd2820r_t.o cxd2820r_t2.o drxk-objs := drxk_hard.o obj-$(CONFIG_DVB_PLL) += dvb-pll.o diff --git a/drivers/media/dvb/frontends/a8293.c b/drivers/media/dvb-frontends/a8293.c similarity index 100% rename from drivers/media/dvb/frontends/a8293.c rename to drivers/media/dvb-frontends/a8293.c diff --git a/drivers/media/dvb/frontends/a8293.h b/drivers/media/dvb-frontends/a8293.h similarity index 100% rename from drivers/media/dvb/frontends/a8293.h rename to drivers/media/dvb-frontends/a8293.h diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb-frontends/af9013.c similarity index 86% rename from drivers/media/dvb/frontends/af9013.c rename to drivers/media/dvb-frontends/af9013.c index 5bc570d7784669df4599555525f7586f69d52a81..e9f04a36577b582849f5f5d9ae29f7466462dac0 100644 --- a/drivers/media/dvb/frontends/af9013.c +++ b/drivers/media/dvb-frontends/af9013.c @@ -24,10 +24,6 @@ #include "af9013_priv.h" -int af9013_debug; -module_param_named(debug, af9013_debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); - struct af9013_state { struct i2c_adapter *i2c; struct dvb_frontend fe; @@ -73,7 +69,8 @@ static int af9013_wr_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg, if (ret == 1) { ret = 0; } else { - warn("i2c wr failed=%d reg=%04x len=%d", ret, reg, len); + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%04x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } return ret; @@ -107,7 +104,8 @@ static int af9013_rd_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg, if (ret == 2) { ret = 0; } else { - warn("i2c rd failed=%d reg=%04x len=%d", ret, reg, len); + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%04x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } return ret; @@ -220,7 +218,8 @@ static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval) u8 pos; u16 addr; - dbg("%s: gpio=%d gpioval=%02x", __func__, gpio, gpioval); + dev_dbg(&state->i2c->dev, "%s: gpio=%d gpioval=%02x\n", + __func__, gpio, gpioval); /* * GPIO0 & GPIO1 0xd735 @@ -238,7 +237,8 @@ static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval) break; default: - err("invalid gpio:%d\n", gpio); + dev_err(&state->i2c->dev, "%s: invalid gpio=%d\n", + KBUILD_MODNAME, gpio); ret = -EINVAL; goto err; }; @@ -261,15 +261,15 @@ static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } -static u32 af913_div(u32 a, u32 b, u32 x) +static u32 af9013_div(struct af9013_state *state, u32 a, u32 b, u32 x) { u32 r = 0, c = 0, i; - dbg("%s: a=%d b=%d x=%d", __func__, a, b, x); + dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d\n", __func__, a, b, x); if (a > b) { c = a / b; @@ -286,7 +286,9 @@ static u32 af913_div(u32 a, u32 b, u32 x) } r = (c << (u32)x) + r; - dbg("%s: a=%d b=%d x=%d r=%x", __func__, a, b, x, r); + dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d r=%d r=%x\n", + __func__, a, b, x, r, r); + return r; } @@ -295,7 +297,7 @@ static int af9013_power_ctrl(struct af9013_state *state, u8 onoff) int ret, i; u8 tmp; - dbg("%s: onoff=%d", __func__, onoff); + dev_dbg(&state->i2c->dev, "%s: onoff=%d\n", __func__, onoff); /* enable reset */ ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 1); @@ -340,7 +342,7 @@ static int af9013_power_ctrl(struct af9013_state *state, u8 onoff) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -349,7 +351,7 @@ static int af9013_statistics_ber_unc_start(struct dvb_frontend *fe) struct af9013_state *state = fe->demodulator_priv; int ret; - dbg("%s", __func__); + dev_dbg(&state->i2c->dev, "%s:\n", __func__); /* reset and start BER counter */ ret = af9013_wr_reg_bits(state, 0xd391, 4, 1, 1); @@ -358,7 +360,7 @@ static int af9013_statistics_ber_unc_start(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -368,7 +370,7 @@ static int af9013_statistics_ber_unc_result(struct dvb_frontend *fe) int ret; u8 buf[5]; - dbg("%s", __func__); + dev_dbg(&state->i2c->dev, "%s:\n", __func__); /* check if error bit count is ready */ ret = af9013_rd_reg_bits(state, 0xd391, 4, 1, &buf[0]); @@ -376,7 +378,7 @@ static int af9013_statistics_ber_unc_result(struct dvb_frontend *fe) goto err; if (!buf[0]) { - dbg("%s: not ready", __func__); + dev_dbg(&state->i2c->dev, "%s: not ready\n", __func__); return 0; } @@ -389,7 +391,7 @@ static int af9013_statistics_ber_unc_result(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -398,7 +400,7 @@ static int af9013_statistics_snr_start(struct dvb_frontend *fe) struct af9013_state *state = fe->demodulator_priv; int ret; - dbg("%s", __func__); + dev_dbg(&state->i2c->dev, "%s:\n", __func__); /* start SNR meas */ ret = af9013_wr_reg_bits(state, 0xd2e1, 3, 1, 1); @@ -407,7 +409,7 @@ static int af9013_statistics_snr_start(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -419,7 +421,7 @@ static int af9013_statistics_snr_result(struct dvb_frontend *fe) u32 snr_val; const struct af9013_snr *uninitialized_var(snr_lut); - dbg("%s", __func__); + dev_dbg(&state->i2c->dev, "%s:\n", __func__); /* check if SNR ready */ ret = af9013_rd_reg_bits(state, 0xd2e1, 3, 1, &tmp); @@ -427,7 +429,7 @@ static int af9013_statistics_snr_result(struct dvb_frontend *fe) goto err; if (!tmp) { - dbg("%s: not ready", __func__); + dev_dbg(&state->i2c->dev, "%s: not ready\n", __func__); return 0; } @@ -471,7 +473,7 @@ static int af9013_statistics_snr_result(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -482,7 +484,7 @@ static int af9013_statistics_signal_strength(struct dvb_frontend *fe) u8 buf[2], rf_gain, if_gain; int signal_strength; - dbg("%s", __func__); + dev_dbg(&state->i2c->dev, "%s:\n", __func__); if (!state->signal_strength_en) return 0; @@ -508,7 +510,7 @@ static int af9013_statistics_signal_strength(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -578,8 +580,8 @@ static int af9013_set_frontend(struct dvb_frontend *fe) u8 buf[6]; u32 if_frequency, freq_cw; - dbg("%s: frequency=%d bandwidth_hz=%d", __func__, - c->frequency, c->bandwidth_hz); + dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", + __func__, c->frequency, c->bandwidth_hz); /* program tuner */ if (fe->ops.tuner_ops.set_params) @@ -606,6 +608,9 @@ static int af9013_set_frontend(struct dvb_frontend *fe) else if_frequency = state->config.if_frequency; + dev_dbg(&state->i2c->dev, "%s: if_frequency=%d\n", + __func__, if_frequency); + sampling_freq = if_frequency; while (sampling_freq > (state->config.clock / 2)) @@ -618,7 +623,8 @@ static int af9013_set_frontend(struct dvb_frontend *fe) spec_inv = !state->config.spec_inv; } - freq_cw = af913_div(sampling_freq, state->config.clock, 23); + freq_cw = af9013_div(state, sampling_freq, state->config.clock, + 23); if (spec_inv) freq_cw = 0x800000 - freq_cw; @@ -676,7 +682,8 @@ static int af9013_set_frontend(struct dvb_frontend *fe) buf[0] |= (1 << 0); break; default: - dbg("%s: invalid transmission_mode", __func__); + dev_dbg(&state->i2c->dev, "%s: invalid transmission_mode\n", + __func__); auto_mode = 1; } @@ -696,7 +703,8 @@ static int af9013_set_frontend(struct dvb_frontend *fe) buf[0] |= (3 << 2); break; default: - dbg("%s: invalid guard_interval", __func__); + dev_dbg(&state->i2c->dev, "%s: invalid guard_interval\n", + __func__); auto_mode = 1; } @@ -716,7 +724,7 @@ static int af9013_set_frontend(struct dvb_frontend *fe) buf[0] |= (3 << 4); break; default: - dbg("%s: invalid hierarchy", __func__); + dev_dbg(&state->i2c->dev, "%s: invalid hierarchy\n", __func__); auto_mode = 1; }; @@ -733,7 +741,7 @@ static int af9013_set_frontend(struct dvb_frontend *fe) buf[1] |= (2 << 6); break; default: - dbg("%s: invalid modulation", __func__); + dev_dbg(&state->i2c->dev, "%s: invalid modulation\n", __func__); auto_mode = 1; } @@ -759,7 +767,8 @@ static int af9013_set_frontend(struct dvb_frontend *fe) buf[2] |= (4 << 0); break; default: - dbg("%s: invalid code_rate_HP", __func__); + dev_dbg(&state->i2c->dev, "%s: invalid code_rate_HP\n", + __func__); auto_mode = 1; } @@ -784,7 +793,8 @@ static int af9013_set_frontend(struct dvb_frontend *fe) case FEC_NONE: break; default: - dbg("%s: invalid code_rate_LP", __func__); + dev_dbg(&state->i2c->dev, "%s: invalid code_rate_LP\n", + __func__); auto_mode = 1; } @@ -798,7 +808,8 @@ static int af9013_set_frontend(struct dvb_frontend *fe) buf[1] |= (2 << 2); break; default: - dbg("%s: invalid bandwidth_hz", __func__); + dev_dbg(&state->i2c->dev, "%s: invalid bandwidth_hz\n", + __func__); ret = -EINVAL; goto err; } @@ -813,7 +824,7 @@ static int af9013_set_frontend(struct dvb_frontend *fe) if (ret) goto err; - dbg("%s: auto params", __func__); + dev_dbg(&state->i2c->dev, "%s: auto params\n", __func__); } else { /* set easy mode flag */ ret = af9013_wr_reg(state, 0xaefd, 1); @@ -824,7 +835,7 @@ static int af9013_set_frontend(struct dvb_frontend *fe) if (ret) goto err; - dbg("%s: manual params", __func__); + dev_dbg(&state->i2c->dev, "%s: manual params\n", __func__); } /* tune */ @@ -838,7 +849,7 @@ static int af9013_set_frontend(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -849,7 +860,7 @@ static int af9013_get_frontend(struct dvb_frontend *fe) int ret; u8 buf[3]; - dbg("%s", __func__); + dev_dbg(&state->i2c->dev, "%s:\n", __func__); ret = af9013_rd_regs(state, 0xd3c0, buf, 3); if (ret) @@ -955,7 +966,7 @@ static int af9013_get_frontend(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -1005,7 +1016,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -1045,7 +1056,7 @@ static int af9013_init(struct dvb_frontend *fe) u32 adc_cw; const struct af9013_reg_bit *init; - dbg("%s", __func__); + dev_dbg(&state->i2c->dev, "%s:\n", __func__); /* power on */ ret = af9013_power_ctrl(state, 1); @@ -1077,11 +1088,12 @@ static int af9013_init(struct dvb_frontend *fe) tmp = 3; break; default: - err("invalid clock"); + dev_err(&state->i2c->dev, "%s: invalid clock\n", + KBUILD_MODNAME); return -EINVAL; } - adc_cw = af913_div(state->config.clock, 1000000ul, 19); + adc_cw = af9013_div(state, state->config.clock, 1000000ul, 19); buf[0] = (adc_cw >> 0) & 0xff; buf[1] = (adc_cw >> 8) & 0xff; buf[2] = (adc_cw >> 16) & 0xff; @@ -1137,7 +1149,7 @@ static int af9013_init(struct dvb_frontend *fe) goto err; /* load OFSM settings */ - dbg("%s: load ofsm settings", __func__); + dev_dbg(&state->i2c->dev, "%s: load ofsm settings\n", __func__); len = ARRAY_SIZE(ofsm_init); init = ofsm_init; for (i = 0; i < len; i++) { @@ -1148,7 +1160,8 @@ static int af9013_init(struct dvb_frontend *fe) } /* load tuner specific settings */ - dbg("%s: load tuner specific settings", __func__); + dev_dbg(&state->i2c->dev, "%s: load tuner specific settings\n", + __func__); switch (state->config.tuner) { case AF9013_TUNER_MXL5003D: len = ARRAY_SIZE(tuner_init_mxl5003d); @@ -1259,7 +1272,7 @@ static int af9013_init(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -1268,7 +1281,7 @@ static int af9013_sleep(struct dvb_frontend *fe) struct af9013_state *state = fe->demodulator_priv; int ret; - dbg("%s", __func__); + dev_dbg(&state->i2c->dev, "%s:\n", __func__); /* stop statistics polling */ cancel_delayed_work_sync(&state->statistics_work); @@ -1285,7 +1298,7 @@ static int af9013_sleep(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -1294,7 +1307,7 @@ static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) int ret; struct af9013_state *state = fe->demodulator_priv; - dbg("%s: enable=%d", __func__, enable); + dev_dbg(&state->i2c->dev, "%s: enable=%d\n", __func__, enable); /* gate already open or close */ if (state->i2c_gate_state == enable) @@ -1311,7 +1324,7 @@ static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -1330,7 +1343,7 @@ static int af9013_download_firmware(struct af9013_state *state) u16 checksum = 0; u8 val; u8 fw_params[4]; - u8 *fw_file = AF9013_DEFAULT_FIRMWARE; + u8 *fw_file = AF9013_FIRMWARE; msleep(100); /* check whether firmware is already running */ @@ -1338,25 +1351,28 @@ static int af9013_download_firmware(struct af9013_state *state) if (ret) goto err; else - dbg("%s: firmware status=%02x", __func__, val); + dev_dbg(&state->i2c->dev, "%s: firmware status=%02x\n", + __func__, val); if (val == 0x0c) /* fw is running, no need for download */ goto exit; - info("found a '%s' in cold state, will try to load a firmware", - af9013_ops.info.name); + dev_info(&state->i2c->dev, "%s: found a '%s' in cold state, will try " \ + "to load a firmware\n", + KBUILD_MODNAME, af9013_ops.info.name); /* request the firmware, this will block and timeout */ ret = request_firmware(&fw, fw_file, state->i2c->dev.parent); if (ret) { - err("did not find the firmware file. (%s) " - "Please see linux/Documentation/dvb/ for more details" \ - " on firmware-problems. (%d)", - fw_file, ret); + dev_info(&state->i2c->dev, "%s: did not find the firmware " \ + "file. (%s) Please see linux/Documentation/dvb/ for " \ + "more details on firmware-problems. (%d)\n", + KBUILD_MODNAME, fw_file, ret); goto err; } - info("downloading firmware from file '%s'", fw_file); + dev_info(&state->i2c->dev, "%s: downloading firmware from file '%s'\n", + KBUILD_MODNAME, fw_file); /* calc checksum */ for (i = 0; i < fw->size; i++) @@ -1384,7 +1400,9 @@ static int af9013_download_firmware(struct af9013_state *state) FW_ADDR + fw->size - remaining, (u8 *) &fw->data[fw->size - remaining], len); if (ret) { - err("firmware download failed:%d", ret); + dev_err(&state->i2c->dev, + "%s: firmware download failed=%d\n", + KBUILD_MODNAME, ret); goto err_release; } } @@ -1402,17 +1420,20 @@ static int af9013_download_firmware(struct af9013_state *state) if (ret) goto err_release; - dbg("%s: firmware status=%02x", __func__, val); + dev_dbg(&state->i2c->dev, "%s: firmware status=%02x\n", + __func__, val); if (val == 0x0c || val == 0x04) /* success or fail */ break; } if (val == 0x04) { - err("firmware did not run"); + dev_err(&state->i2c->dev, "%s: firmware did not run\n", + KBUILD_MODNAME); ret = -ENODEV; } else if (val != 0x0c) { - err("firmware boot timeout"); + dev_err(&state->i2c->dev, "%s: firmware boot timeout\n", + KBUILD_MODNAME); ret = -ENODEV; } @@ -1421,7 +1442,8 @@ static int af9013_download_firmware(struct af9013_state *state) err: exit: if (!ret) - info("found a '%s' in warm state.", af9013_ops.info.name); + dev_info(&state->i2c->dev, "%s: found a '%s' in warm state\n", + KBUILD_MODNAME, af9013_ops.info.name); return ret; } @@ -1453,7 +1475,8 @@ struct dvb_frontend *af9013_attach(const struct af9013_config *config, if (ret) goto err; - info("firmware version %d.%d.%d.%d", buf[0], buf[1], buf[2], buf[3]); + dev_info(&state->i2c->dev, "%s: firmware version %d.%d.%d.%d\n", + KBUILD_MODNAME, buf[0], buf[1], buf[2], buf[3]); /* set GPIOs */ for (i = 0; i < sizeof(state->config.gpio); i++) { @@ -1522,3 +1545,4 @@ static struct dvb_frontend_ops af9013_ops = { MODULE_AUTHOR("Antti Palosaari "); MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(AF9013_FIRMWARE); diff --git a/drivers/media/dvb/frontends/af9013.h b/drivers/media/dvb-frontends/af9013.h similarity index 97% rename from drivers/media/dvb/frontends/af9013.h rename to drivers/media/dvb-frontends/af9013.h index b973fc5a03844d68db01ee8ed2743192688b9263..dc837d91327ae682ec3fae3c65e4875064017717 100644 --- a/drivers/media/dvb/frontends/af9013.h +++ b/drivers/media/dvb-frontends/af9013.h @@ -110,7 +110,7 @@ extern struct dvb_frontend *af9013_attach(const struct af9013_config *config, static inline struct dvb_frontend *af9013_attach( const struct af9013_config *config, struct i2c_adapter *i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + pr_warn("%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif /* CONFIG_DVB_AF9013 */ diff --git a/drivers/media/dvb/frontends/af9013_priv.h b/drivers/media/dvb-frontends/af9013_priv.h similarity index 98% rename from drivers/media/dvb/frontends/af9013_priv.h rename to drivers/media/dvb-frontends/af9013_priv.h index fa848af6e9b403fe6b8c7d9eec07d9b06647776b..8b9392cfc00dd13ddfb6d6834bbe370e6b474438 100644 --- a/drivers/media/dvb/frontends/af9013_priv.h +++ b/drivers/media/dvb-frontends/af9013_priv.h @@ -29,20 +29,7 @@ #include "af9013.h" #include -#define LOG_PREFIX "af9013" - -#undef dbg -#define dbg(f, arg...) \ - if (af9013_debug) \ - printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) -#undef err -#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) -#undef info -#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) -#undef warn -#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg) - -#define AF9013_DEFAULT_FIRMWARE "dvb-fe-af9013.fw" +#define AF9013_FIRMWARE "dvb-fe-af9013.fw" struct af9013_reg_bit { u16 addr; diff --git a/drivers/media/dvb/frontends/af9033.c b/drivers/media/dvb-frontends/af9033.c similarity index 87% rename from drivers/media/dvb/frontends/af9033.c rename to drivers/media/dvb-frontends/af9033.c index a38998286260043f9fdc9fa294c3bab8ccdd7306..8162d939c4b2d460a2d12111b256e6600dc19f6f 100644 --- a/drivers/media/dvb/frontends/af9033.c +++ b/drivers/media/dvb-frontends/af9033.c @@ -59,8 +59,8 @@ static int af9033_wr_regs(struct af9033_state *state, u32 reg, const u8 *val, if (ret == 1) { ret = 0; } else { - printk(KERN_WARNING "%s: i2c wr failed=%d reg=%06x len=%d\n", - __func__, ret, reg, len); + dev_warn(&state->i2c->dev, "%s: i2c wr failed=%d reg=%06x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } @@ -91,8 +91,8 @@ static int af9033_rd_regs(struct af9033_state *state, u32 reg, u8 *val, int len) if (ret == 2) { ret = 0; } else { - printk(KERN_WARNING "%s: i2c rd failed=%d reg=%06x len=%d\n", - __func__, ret, reg, len); + dev_warn(&state->i2c->dev, "%s: i2c rd failed=%d reg=%06x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } @@ -156,11 +156,11 @@ static int af9033_rd_reg_mask(struct af9033_state *state, u32 reg, u8 *val, return 0; } -static u32 af9033_div(u32 a, u32 b, u32 x) +static u32 af9033_div(struct af9033_state *state, u32 a, u32 b, u32 x) { u32 r = 0, c = 0, i; - pr_debug("%s: a=%d b=%d x=%d\n", __func__, a, b, x); + dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d\n", __func__, a, b, x); if (a > b) { c = a / b; @@ -177,7 +177,8 @@ static u32 af9033_div(u32 a, u32 b, u32 x) } r = (c << (u32)x) + r; - pr_debug("%s: a=%d b=%d x=%d r=%d r=%x\n", __func__, a, b, x, r, r); + dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d r=%d r=%x\n", + __func__, a, b, x, r, r); return r; } @@ -225,14 +226,14 @@ static int af9033_init(struct dvb_frontend *fe) }; /* program clock control */ - clock_cw = af9033_div(state->cfg.clock, 1000000ul, 19ul); + clock_cw = af9033_div(state, state->cfg.clock, 1000000ul, 19ul); buf[0] = (clock_cw >> 0) & 0xff; buf[1] = (clock_cw >> 8) & 0xff; buf[2] = (clock_cw >> 16) & 0xff; buf[3] = (clock_cw >> 24) & 0xff; - pr_debug("%s: clock=%d clock_cw=%08x\n", __func__, state->cfg.clock, - clock_cw); + dev_dbg(&state->i2c->dev, "%s: clock=%d clock_cw=%08x\n", + __func__, state->cfg.clock, clock_cw); ret = af9033_wr_regs(state, 0x800025, buf, 4); if (ret < 0) @@ -244,13 +245,13 @@ static int af9033_init(struct dvb_frontend *fe) break; } - adc_cw = af9033_div(clock_adc_lut[i].adc, 1000000ul, 19ul); + adc_cw = af9033_div(state, clock_adc_lut[i].adc, 1000000ul, 19ul); buf[0] = (adc_cw >> 0) & 0xff; buf[1] = (adc_cw >> 8) & 0xff; buf[2] = (adc_cw >> 16) & 0xff; - pr_debug("%s: adc=%d adc_cw=%06x\n", __func__, clock_adc_lut[i].adc, - adc_cw); + dev_dbg(&state->i2c->dev, "%s: adc=%d adc_cw=%06x\n", + __func__, clock_adc_lut[i].adc, adc_cw); ret = af9033_wr_regs(state, 0x80f1cd, buf, 3); if (ret < 0) @@ -284,7 +285,7 @@ static int af9033_init(struct dvb_frontend *fe) } /* load OFSM settings */ - pr_debug("%s: load ofsm settings\n", __func__); + dev_dbg(&state->i2c->dev, "%s: load ofsm settings\n", __func__); len = ARRAY_SIZE(ofsm_init); init = ofsm_init; for (i = 0; i < len; i++) { @@ -294,7 +295,7 @@ static int af9033_init(struct dvb_frontend *fe) } /* load tuner specific settings */ - pr_debug("%s: load tuner specific settings\n", + dev_dbg(&state->i2c->dev, "%s: load tuner specific settings\n", __func__); switch (state->cfg.tuner) { case AF9033_TUNER_TUA9001: @@ -313,9 +314,13 @@ static int af9033_init(struct dvb_frontend *fe) len = ARRAY_SIZE(tuner_init_tda18218); init = tuner_init_tda18218; break; + case AF9033_TUNER_FC2580: + len = ARRAY_SIZE(tuner_init_fc2580); + init = tuner_init_fc2580; + break; default: - pr_debug("%s: unsupported tuner ID=%d\n", __func__, - state->cfg.tuner); + dev_dbg(&state->i2c->dev, "%s: unsupported tuner ID=%d\n", + __func__, state->cfg.tuner); ret = -ENODEV; goto err; } @@ -331,7 +336,7 @@ static int af9033_init(struct dvb_frontend *fe) return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -358,7 +363,7 @@ static int af9033_sleep(struct dvb_frontend *fe) usleep_range(200, 10000); } - pr_debug("%s: loop=%d\n", __func__, i); + dev_dbg(&state->i2c->dev, "%s: loop=%d\n", __func__, i); if (i == 0) { ret = -ETIMEDOUT; @@ -384,7 +389,7 @@ static int af9033_sleep(struct dvb_frontend *fe) return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -407,8 +412,8 @@ static int af9033_set_frontend(struct dvb_frontend *fe) u8 tmp, buf[3], bandwidth_reg_val; u32 if_frequency, freq_cw, adc_freq; - pr_debug("%s: frequency=%d bandwidth_hz=%d\n", __func__, c->frequency, - c->bandwidth_hz); + dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", + __func__, c->frequency, c->bandwidth_hz); /* check bandwidth */ switch (c->bandwidth_hz) { @@ -422,7 +427,8 @@ static int af9033_set_frontend(struct dvb_frontend *fe) bandwidth_reg_val = 0x02; break; default: - pr_debug("%s: invalid bandwidth_hz\n", __func__); + dev_dbg(&state->i2c->dev, "%s: invalid bandwidth_hz\n", + __func__); ret = -EINVAL; goto err; } @@ -467,7 +473,7 @@ static int af9033_set_frontend(struct dvb_frontend *fe) else if_frequency *= -1; - freq_cw = af9033_div(if_frequency, adc_freq, 23ul); + freq_cw = af9033_div(state, if_frequency, adc_freq, 23ul); if (spec_inv == -1) freq_cw *= -1; @@ -522,7 +528,7 @@ static int af9033_set_frontend(struct dvb_frontend *fe) return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -534,7 +540,7 @@ static int af9033_get_frontend(struct dvb_frontend *fe) int ret; u8 buf[8]; - pr_debug("%s\n", __func__); + dev_dbg(&state->i2c->dev, "%s:\n", __func__); /* read all needed registers */ ret = af9033_rd_regs(state, 0x80f900, buf, sizeof(buf)); @@ -649,7 +655,7 @@ static int af9033_get_frontend(struct dvb_frontend *fe) return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -695,7 +701,7 @@ static int af9033_read_status(struct dvb_frontend *fe, fe_status_t *status) return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -749,7 +755,7 @@ static int af9033_read_snr(struct dvb_frontend *fe, u16 *snr) return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -771,7 +777,7 @@ static int af9033_read_signal_strength(struct dvb_frontend *fe, u16 *strength) return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -815,7 +821,8 @@ static int af9033_update_ch_stat(struct af9033_state *state) return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; } @@ -852,7 +859,7 @@ static int af9033_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) struct af9033_state *state = fe->demodulator_priv; int ret; - pr_debug("%s: enable=%d\n", __func__, enable); + dev_dbg(&state->i2c->dev, "%s: enable=%d\n", __func__, enable); ret = af9033_wr_reg_mask(state, 0x00fa04, enable, 0x01); if (ret < 0) @@ -861,7 +868,7 @@ static int af9033_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -875,7 +882,7 @@ struct dvb_frontend *af9033_attach(const struct af9033_config *config, struct af9033_state *state; u8 buf[8]; - pr_debug("%s:\n", __func__); + dev_dbg(&i2c->dev, "%s:\n", __func__); /* allocate memory for the internal state */ state = kzalloc(sizeof(struct af9033_state), GFP_KERNEL); @@ -887,9 +894,9 @@ struct dvb_frontend *af9033_attach(const struct af9033_config *config, memcpy(&state->cfg, config, sizeof(struct af9033_config)); if (state->cfg.clock != 12000000) { - printk(KERN_INFO "af9033: unsupported clock=%d, only " \ - "12000000 Hz is supported currently\n", - state->cfg.clock); + dev_err(&state->i2c->dev, "%s: af9033: unsupported clock=%d, " \ + "only 12000000 Hz is supported currently\n", + KBUILD_MODNAME, state->cfg.clock); goto err; } @@ -902,9 +909,18 @@ struct dvb_frontend *af9033_attach(const struct af9033_config *config, if (ret < 0) goto err; - printk(KERN_INFO "af9033: firmware version: LINK=%d.%d.%d.%d " \ - "OFDM=%d.%d.%d.%d\n", buf[0], buf[1], buf[2], buf[3], - buf[4], buf[5], buf[6], buf[7]); + dev_info(&state->i2c->dev, "%s: firmware version: LINK=%d.%d.%d.%d " \ + "OFDM=%d.%d.%d.%d\n", KBUILD_MODNAME, buf[0], buf[1], + buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); + + /* sleep */ + ret = af9033_wr_reg(state, 0x80004c, 1); + if (ret < 0) + goto err; + + ret = af9033_wr_reg(state, 0x800000, 0); + if (ret < 0) + goto err; /* configure internal TS mode */ switch (state->cfg.ts_mode) { diff --git a/drivers/media/dvb/frontends/af9033.h b/drivers/media/dvb-frontends/af9033.h similarity index 94% rename from drivers/media/dvb/frontends/af9033.h rename to drivers/media/dvb-frontends/af9033.h index 9e302c3f0f7d1e91a780117c40c557603b1a20ca..bfa4313fde215ed00527358d8f80022394bf638d 100644 --- a/drivers/media/dvb/frontends/af9033.h +++ b/drivers/media/dvb-frontends/af9033.h @@ -42,6 +42,7 @@ struct af9033_config { #define AF9033_TUNER_FC0011 0x28 /* Fitipower FC0011 */ #define AF9033_TUNER_MXL5007T 0xa0 /* MaxLinear MxL5007T */ #define AF9033_TUNER_TDA18218 0xa1 /* NXP TDA 18218HN */ +#define AF9033_TUNER_FC2580 0x32 /* FCI FC2580 */ u8 tuner; /* @@ -67,7 +68,7 @@ extern struct dvb_frontend *af9033_attach(const struct af9033_config *config, static inline struct dvb_frontend *af9033_attach( const struct af9033_config *config, struct i2c_adapter *i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + pr_warn("%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif diff --git a/drivers/media/dvb/frontends/af9033_priv.h b/drivers/media/dvb-frontends/af9033_priv.h similarity index 92% rename from drivers/media/dvb/frontends/af9033_priv.h rename to drivers/media/dvb-frontends/af9033_priv.h index 0b783b9ed75ebc44b0ec5c5ae2aaa0ba102eb03f..34dddcd77538d69a6bbde558a85d4817a05f42d0 100644 --- a/drivers/media/dvb/frontends/af9033_priv.h +++ b/drivers/media/dvb-frontends/af9033_priv.h @@ -466,5 +466,42 @@ static const struct reg_val tuner_init_tda18218[] = { {0x80f1e6, 0x00}, }; +/* FCI FC2580 tuner init */ +static const struct reg_val tuner_init_fc2580[] = { + { 0x800046, 0x32 }, + { 0x800057, 0x01 }, + { 0x800058, 0x00 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x800071, 0x05 }, + { 0x800072, 0x02 }, + { 0x800074, 0x01 }, + { 0x800079, 0x01 }, + { 0x800093, 0x00 }, + { 0x800094, 0x00 }, + { 0x800095, 0x00 }, + { 0x800096, 0x05 }, + { 0x8000b3, 0x01 }, + { 0x8000c3, 0x01 }, + { 0x8000c4, 0x00 }, + { 0x80f007, 0x00 }, + { 0x80f00c, 0x19 }, + { 0x80f00d, 0x1A }, + { 0x80f00e, 0x00 }, + { 0x80f00f, 0x02 }, + { 0x80f010, 0x00 }, + { 0x80f011, 0x02 }, + { 0x80f012, 0x00 }, + { 0x80f013, 0x02 }, + { 0x80f014, 0x00 }, + { 0x80f015, 0x02 }, + { 0x80f01f, 0x96 }, + { 0x80f020, 0x00 }, + { 0x80f029, 0x96 }, + { 0x80f02a, 0x00 }, + { 0x80f077, 0x01 }, + { 0x80f1e6, 0x01 }, +}; + #endif /* AF9033_PRIV_H */ diff --git a/drivers/media/dvb/frontends/atbm8830.c b/drivers/media/dvb-frontends/atbm8830.c similarity index 99% rename from drivers/media/dvb/frontends/atbm8830.c rename to drivers/media/dvb-frontends/atbm8830.c index a2261ea2cf82a3cf148dbb5515e3add5a309756d..4e11dc4b13350f7640b0374020af1c533800d6f2 100644 --- a/drivers/media/dvb/frontends/atbm8830.c +++ b/drivers/media/dvb-frontends/atbm8830.c @@ -428,7 +428,7 @@ static int atbm8830_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) } static struct dvb_frontend_ops atbm8830_ops = { - .delsys = { SYS_DMBTH }, + .delsys = { SYS_DTMB }, .info = { .name = "AltoBeam ATBM8830/8831 DMB-TH", .frequency_min = 474000000, diff --git a/drivers/media/dvb/frontends/atbm8830.h b/drivers/media/dvb-frontends/atbm8830.h similarity index 100% rename from drivers/media/dvb/frontends/atbm8830.h rename to drivers/media/dvb-frontends/atbm8830.h diff --git a/drivers/media/dvb/frontends/atbm8830_priv.h b/drivers/media/dvb-frontends/atbm8830_priv.h similarity index 100% rename from drivers/media/dvb/frontends/atbm8830_priv.h rename to drivers/media/dvb-frontends/atbm8830_priv.h diff --git a/drivers/media/dvb/frontends/au8522.h b/drivers/media/dvb-frontends/au8522.h similarity index 100% rename from drivers/media/dvb/frontends/au8522.h rename to drivers/media/dvb-frontends/au8522.h diff --git a/drivers/media/dvb/frontends/au8522_common.c b/drivers/media/dvb-frontends/au8522_common.c similarity index 93% rename from drivers/media/dvb/frontends/au8522_common.c rename to drivers/media/dvb-frontends/au8522_common.c index 5cfe151ee394057cfac74059c10ed557494191f1..3559ff230045450ad885bf8e118aaa27a80c50df 100644 --- a/drivers/media/dvb/frontends/au8522_common.c +++ b/drivers/media/dvb-frontends/au8522_common.c @@ -26,8 +26,6 @@ #include "dvb_frontend.h" #include "au8522_priv.h" -MODULE_LICENSE("GPL"); - static int debug; #define dprintk(arg...)\ @@ -101,6 +99,19 @@ int au8522_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) } EXPORT_SYMBOL(au8522_i2c_gate_ctrl); +int au8522_analog_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct au8522_state *state = fe->demodulator_priv; + + dprintk("%s(%d)\n", __func__, enable); + + if (enable) + return au8522_writereg(state, 0x106, 1); + else + return au8522_writereg(state, 0x106, 0); +} +EXPORT_SYMBOL(au8522_analog_i2c_gate_ctrl); + /* Reset the demod hardware and reset all of the configuration registers to a default state. */ int au8522_get_state(struct au8522_state **state, struct i2c_adapter *i2c, @@ -257,3 +268,10 @@ int au8522_sleep(struct dvb_frontend *fe) return 0; } EXPORT_SYMBOL(au8522_sleep); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +MODULE_DESCRIPTION("Auvitek AU8522 QAM-B/ATSC Demodulator driver"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb-frontends/au8522_decoder.c similarity index 98% rename from drivers/media/dvb/frontends/au8522_decoder.c rename to drivers/media/dvb-frontends/au8522_decoder.c index 55b6390198e34d3ac7b77a71194645cbf33d1951..5243ba6295cc1aabd93796aa23e90bdb300c59ad 100644 --- a/drivers/media/dvb/frontends/au8522_decoder.c +++ b/drivers/media/dvb-frontends/au8522_decoder.c @@ -257,9 +257,11 @@ static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode) au8522_writereg(state, AU8522_TVDED_DBG_MODE_REG060H, AU8522_TVDED_DBG_MODE_REG060H_CVBS); au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL1_REG061H, - AU8522_TVDEC_FORMAT_CTRL1_REG061H_CVBS13); + AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525 | + AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492 | + AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_MN); au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL2_REG062H, - AU8522_TVDEC_FORMAT_CTRL2_REG062H_CVBS13); + AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_NTSC); au8522_writereg(state, AU8522_TVDEC_VCR_DET_LLIM_REG063H, AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS); au8522_writereg(state, AU8522_TVDEC_VCR_DET_HLIM_REG064H, @@ -657,11 +659,6 @@ static int au8522_s_video_routing(struct v4l2_subdev *sd, au8522_reset(sd, 0); - /* Jam open the i2c gate to the tuner. We do this here to handle the - case where the user went into digital mode (causing the gate to be - closed), and then came back to analog mode */ - au8522_writereg(state, 0x106, 1); - if (input == AU8522_COMPOSITE_CH1) { au8522_setup_cvbs_mode(state); } else if (input == AU8522_SVIDEO_CH13) { diff --git a/drivers/media/dvb/frontends/au8522_dig.c b/drivers/media/dvb-frontends/au8522_dig.c similarity index 95% rename from drivers/media/dvb/frontends/au8522_dig.c rename to drivers/media/dvb-frontends/au8522_dig.c index 5fc70d6cd04fad4e813d94c736d599d1cf22b3d3..a68974f6d7081f2bc877b43e3c9481d49de45dc9 100644 --- a/drivers/media/dvb/frontends/au8522_dig.c +++ b/drivers/media/dvb-frontends/au8522_dig.c @@ -157,54 +157,54 @@ static struct mse2snr_tab qam64_mse2snr_tab[] = { /* QAM256 SNR lookup table */ static struct mse2snr_tab qam256_mse2snr_tab[] = { - { 16, 0 }, - { 17, 400 }, - { 18, 398 }, - { 19, 396 }, - { 20, 394 }, - { 21, 392 }, - { 22, 390 }, - { 23, 388 }, - { 24, 386 }, - { 25, 384 }, - { 26, 382 }, - { 27, 380 }, - { 28, 379 }, - { 29, 378 }, - { 30, 377 }, - { 31, 376 }, - { 32, 375 }, - { 33, 374 }, - { 34, 373 }, - { 35, 372 }, - { 36, 371 }, - { 37, 370 }, - { 38, 362 }, - { 39, 354 }, - { 40, 346 }, - { 41, 338 }, - { 42, 330 }, - { 43, 328 }, - { 44, 326 }, - { 45, 324 }, - { 46, 322 }, - { 47, 320 }, - { 48, 319 }, - { 49, 318 }, - { 50, 317 }, - { 51, 316 }, - { 52, 315 }, - { 53, 314 }, - { 54, 313 }, - { 55, 312 }, - { 56, 311 }, - { 57, 310 }, - { 58, 308 }, - { 59, 306 }, - { 60, 304 }, - { 61, 302 }, - { 62, 300 }, - { 63, 298 }, + { 15, 0 }, + { 16, 400 }, + { 17, 398 }, + { 18, 396 }, + { 19, 394 }, + { 20, 392 }, + { 21, 390 }, + { 22, 388 }, + { 23, 386 }, + { 24, 384 }, + { 25, 382 }, + { 26, 380 }, + { 27, 379 }, + { 28, 378 }, + { 29, 377 }, + { 30, 376 }, + { 31, 375 }, + { 32, 374 }, + { 33, 373 }, + { 34, 372 }, + { 35, 371 }, + { 36, 370 }, + { 37, 362 }, + { 38, 354 }, + { 39, 346 }, + { 40, 338 }, + { 41, 330 }, + { 42, 328 }, + { 43, 326 }, + { 44, 324 }, + { 45, 322 }, + { 46, 320 }, + { 47, 319 }, + { 48, 318 }, + { 49, 317 }, + { 50, 316 }, + { 51, 315 }, + { 52, 314 }, + { 53, 313 }, + { 54, 312 }, + { 55, 311 }, + { 56, 310 }, + { 57, 308 }, + { 58, 306 }, + { 59, 304 }, + { 60, 302 }, + { 61, 300 }, + { 62, 298 }, { 65, 295 }, { 68, 294 }, { 70, 293 }, @@ -777,6 +777,8 @@ struct dvb_frontend *au8522_attach(const struct au8522_config *config, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; + state->frontend.ops.analog_ops.i2c_gate_ctrl = au8522_analog_i2c_gate_ctrl; + if (au8522_init(&state->frontend) != 0) { printk(KERN_ERR "%s: Failed to initialize correctly\n", __func__); diff --git a/drivers/media/dvb/frontends/au8522_priv.h b/drivers/media/dvb-frontends/au8522_priv.h similarity index 93% rename from drivers/media/dvb/frontends/au8522_priv.h rename to drivers/media/dvb-frontends/au8522_priv.h index 6e4a438732b569717a8f9e89bf78e6a532ab8c36..0529699a27bd64188f8c625d245db12278eb95e3 100644 --- a/drivers/media/dvb/frontends/au8522_priv.h +++ b/drivers/media/dvb-frontends/au8522_priv.h @@ -82,6 +82,7 @@ int au8522_get_state(struct au8522_state **state, struct i2c_adapter *i2c, u8 client_address); void au8522_release_state(struct au8522_state *state); int au8522_i2c_gate_ctrl(struct dvb_frontend *fe, int enable); +int au8522_analog_i2c_gate_ctrl(struct dvb_frontend *fe, int enable); int au8522_led_ctrl(struct au8522_state *state, int led); /* REGISTERS */ @@ -325,6 +326,31 @@ int au8522_led_ctrl(struct au8522_state *state, int led); /**************************************************************/ +/* Format control 1 */ + +/* VCR Mode 7-6 */ +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_VCR_MODE_YES 0x80 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_VCR_MODE_NO 0x40 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_VCR_MODE_AUTO 0x00 +/* Field len 5-4 */ +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_625 0x20 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525 0x10 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_AUTO 0x00 +/* Line len (us) 3-2 */ +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_64_000 0x0b +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492 0x08 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_556 0x04 +/* Subcarrier freq 1-0 */ +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_AUTO 0x03 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_443 0x02 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_MN 0x01 +#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_50 0x00 + +/* Format control 2 */ +#define AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_AUTODETECT 0x00 +#define AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_NTSC 0x01 + + #define AU8522_INPUT_CONTROL_REG081H_ATSC 0xC4 #define AU8522_INPUT_CONTROL_REG081H_ATVRF 0xC4 #define AU8522_INPUT_CONTROL_REG081H_ATVRF13 0xC4 @@ -385,9 +411,6 @@ int au8522_led_ctrl(struct au8522_state *state, int led); #define AU8522_TVDEC_COMB_MODE_REG015H_CVBS 0x00 #define AU8522_REG016H_CVBS 0x00 #define AU8522_TVDED_DBG_MODE_REG060H_CVBS 0x00 -#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_CVBS 0x0B -#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_CVBS13 0x03 -#define AU8522_TVDEC_FORMAT_CTRL2_REG062H_CVBS13 0x00 #define AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS 0x19 #define AU8522_REG0F9H_AUDIO 0x20 #define AU8522_TVDEC_VCR_DET_HLIM_REG064H_CVBS 0xA7 diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb-frontends/bcm3510.c similarity index 100% rename from drivers/media/dvb/frontends/bcm3510.c rename to drivers/media/dvb-frontends/bcm3510.c diff --git a/drivers/media/dvb/frontends/bcm3510.h b/drivers/media/dvb-frontends/bcm3510.h similarity index 100% rename from drivers/media/dvb/frontends/bcm3510.h rename to drivers/media/dvb-frontends/bcm3510.h diff --git a/drivers/media/dvb/frontends/bcm3510_priv.h b/drivers/media/dvb-frontends/bcm3510_priv.h similarity index 100% rename from drivers/media/dvb/frontends/bcm3510_priv.h rename to drivers/media/dvb-frontends/bcm3510_priv.h diff --git a/drivers/media/dvb/frontends/bsbe1-d01a.h b/drivers/media/dvb-frontends/bsbe1-d01a.h similarity index 100% rename from drivers/media/dvb/frontends/bsbe1-d01a.h rename to drivers/media/dvb-frontends/bsbe1-d01a.h diff --git a/drivers/media/dvb/frontends/bsbe1.h b/drivers/media/dvb-frontends/bsbe1.h similarity index 100% rename from drivers/media/dvb/frontends/bsbe1.h rename to drivers/media/dvb-frontends/bsbe1.h diff --git a/drivers/media/dvb/frontends/bsru6.h b/drivers/media/dvb-frontends/bsru6.h similarity index 100% rename from drivers/media/dvb/frontends/bsru6.h rename to drivers/media/dvb-frontends/bsru6.h diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb-frontends/cx22700.c similarity index 100% rename from drivers/media/dvb/frontends/cx22700.c rename to drivers/media/dvb-frontends/cx22700.c diff --git a/drivers/media/dvb/frontends/cx22700.h b/drivers/media/dvb-frontends/cx22700.h similarity index 100% rename from drivers/media/dvb/frontends/cx22700.h rename to drivers/media/dvb-frontends/cx22700.h diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb-frontends/cx22702.c similarity index 100% rename from drivers/media/dvb/frontends/cx22702.c rename to drivers/media/dvb-frontends/cx22702.c diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb-frontends/cx22702.h similarity index 100% rename from drivers/media/dvb/frontends/cx22702.h rename to drivers/media/dvb-frontends/cx22702.h diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb-frontends/cx24110.c similarity index 100% rename from drivers/media/dvb/frontends/cx24110.c rename to drivers/media/dvb-frontends/cx24110.c diff --git a/drivers/media/dvb/frontends/cx24110.h b/drivers/media/dvb-frontends/cx24110.h similarity index 100% rename from drivers/media/dvb/frontends/cx24110.h rename to drivers/media/dvb-frontends/cx24110.h diff --git a/drivers/media/dvb/frontends/cx24113.c b/drivers/media/dvb-frontends/cx24113.c similarity index 100% rename from drivers/media/dvb/frontends/cx24113.c rename to drivers/media/dvb-frontends/cx24113.c diff --git a/drivers/media/dvb/frontends/cx24113.h b/drivers/media/dvb-frontends/cx24113.h similarity index 100% rename from drivers/media/dvb/frontends/cx24113.h rename to drivers/media/dvb-frontends/cx24113.h diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb-frontends/cx24116.c similarity index 100% rename from drivers/media/dvb/frontends/cx24116.c rename to drivers/media/dvb-frontends/cx24116.c diff --git a/drivers/media/dvb/frontends/cx24116.h b/drivers/media/dvb-frontends/cx24116.h similarity index 100% rename from drivers/media/dvb/frontends/cx24116.h rename to drivers/media/dvb-frontends/cx24116.h diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb-frontends/cx24123.c similarity index 100% rename from drivers/media/dvb/frontends/cx24123.c rename to drivers/media/dvb-frontends/cx24123.c diff --git a/drivers/media/dvb/frontends/cx24123.h b/drivers/media/dvb-frontends/cx24123.h similarity index 100% rename from drivers/media/dvb/frontends/cx24123.h rename to drivers/media/dvb-frontends/cx24123.h diff --git a/drivers/media/dvb/frontends/cxd2820r.h b/drivers/media/dvb-frontends/cxd2820r.h similarity index 92% rename from drivers/media/dvb/frontends/cxd2820r.h rename to drivers/media/dvb-frontends/cxd2820r.h index 5aa306ebb7ef93bd8f356e6bc98325735c88503c..6acc21c581c5fae20267bf771a48d453b140edd2 100644 --- a/drivers/media/dvb/frontends/cxd2820r.h +++ b/drivers/media/dvb-frontends/cxd2820r.h @@ -62,14 +62,6 @@ struct cxd2820r_config { * Values: 0, 1 */ bool spec_inv; - - /* GPIOs for all used modes. - * Default: none, disabled - * Values: - */ - u8 gpio_dvbt[3]; - u8 gpio_dvbt2[3]; - u8 gpio_dvbc[3]; }; @@ -77,12 +69,14 @@ struct cxd2820r_config { (defined(CONFIG_DVB_CXD2820R_MODULE) && defined(MODULE)) extern struct dvb_frontend *cxd2820r_attach( const struct cxd2820r_config *config, - struct i2c_adapter *i2c + struct i2c_adapter *i2c, + int *gpio_chip_base ); #else static inline struct dvb_frontend *cxd2820r_attach( const struct cxd2820r_config *config, - struct i2c_adapter *i2c + struct i2c_adapter *i2c, + int *gpio_chip_base ) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); diff --git a/drivers/media/dvb/frontends/cxd2820r_c.c b/drivers/media/dvb-frontends/cxd2820r_c.c similarity index 89% rename from drivers/media/dvb/frontends/cxd2820r_c.c rename to drivers/media/dvb-frontends/cxd2820r_c.c index ed3b0ba624dec672aaf350790731aa597027346b..125a44041011ca0ed17f99999a2bffaa5c1999a1 100644 --- a/drivers/media/dvb/frontends/cxd2820r_c.c +++ b/drivers/media/dvb-frontends/cxd2820r_c.c @@ -47,12 +47,8 @@ int cxd2820r_set_frontend_c(struct dvb_frontend *fe) { 0x10070, priv->cfg.ts_mode, 0xff }, }; - dbg("%s: RF=%d SR=%d", __func__, c->frequency, c->symbol_rate); - - /* update GPIOs */ - ret = cxd2820r_gpio(fe); - if (ret) - goto error; + dev_dbg(&priv->i2c->dev, "%s: frequency=%d symbol_rate=%d\n", __func__, + c->frequency, c->symbol_rate); /* program tuner */ if (fe->ops.tuner_ops.set_params) @@ -78,7 +74,7 @@ int cxd2820r_set_frontend_c(struct dvb_frontend *fe) } else if_freq = 0; - dbg("%s: if_freq=%d", __func__, if_freq); + dev_dbg(&priv->i2c->dev, "%s: if_freq=%d\n", __func__, if_freq); num = if_freq / 1000; /* Hz => kHz */ num *= 0x4000; @@ -100,7 +96,7 @@ int cxd2820r_set_frontend_c(struct dvb_frontend *fe) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -150,7 +146,7 @@ int cxd2820r_get_frontend_c(struct dvb_frontend *fe) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -184,7 +180,7 @@ int cxd2820r_read_ber_c(struct dvb_frontend *fe, u32 *ber) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -214,7 +210,7 @@ int cxd2820r_read_signal_strength_c(struct dvb_frontend *fe, return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -251,7 +247,7 @@ int cxd2820r_read_snr_c(struct dvb_frontend *fe, u16 *snr) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -283,11 +279,12 @@ int cxd2820r_read_status_c(struct dvb_frontend *fe, fe_status_t *status) } } - dbg("%s: lock=%02x %02x", __func__, buf[0], buf[1]); + dev_dbg(&priv->i2c->dev, "%s: lock=%02x %02x\n", __func__, buf[0], + buf[1]); return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -302,7 +299,7 @@ int cxd2820r_init_c(struct dvb_frontend *fe) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -318,7 +315,7 @@ int cxd2820r_sleep_c(struct dvb_frontend *fe) { 0x00080, 0x00, 0xff }, }; - dbg("%s", __func__); + dev_dbg(&priv->i2c->dev, "%s\n", __func__); priv->delivery_system = SYS_UNDEFINED; @@ -331,7 +328,7 @@ int cxd2820r_sleep_c(struct dvb_frontend *fe) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb-frontends/cxd2820r_core.c similarity index 70% rename from drivers/media/dvb/frontends/cxd2820r_core.c rename to drivers/media/dvb-frontends/cxd2820r_core.c index 3bba37d74f5729d2684af249cb1d5c59e998ac33..42648643693e0ab1fe06bb6975a0d40f8db54968 100644 --- a/drivers/media/dvb/frontends/cxd2820r_core.c +++ b/drivers/media/dvb-frontends/cxd2820r_core.c @@ -21,10 +21,6 @@ #include "cxd2820r_priv.h" -int cxd2820r_debug; -module_param_named(debug, cxd2820r_debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); - /* write multiple registers */ static int cxd2820r_wr_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg, u8 *val, int len) @@ -47,7 +43,8 @@ static int cxd2820r_wr_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg, if (ret == 1) { ret = 0; } else { - warn("i2c wr failed ret:%d reg:%02x len:%d", ret, reg, len); + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } return ret; @@ -78,7 +75,8 @@ static int cxd2820r_rd_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg, memcpy(val, buf, len); ret = 0; } else { - warn("i2c rd failed ret:%d reg:%02x len:%d", ret, reg, len); + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } @@ -170,27 +168,14 @@ int cxd2820r_wr_reg_mask(struct cxd2820r_priv *priv, u32 reg, u8 val, return cxd2820r_wr_reg(priv, reg, val); } -int cxd2820r_gpio(struct dvb_frontend *fe) +int cxd2820r_gpio(struct dvb_frontend *fe, u8 *gpio) { struct cxd2820r_priv *priv = fe->demodulator_priv; int ret, i; - u8 *gpio, tmp0, tmp1; - dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); + u8 tmp0, tmp1; - switch (fe->dtv_property_cache.delivery_system) { - case SYS_DVBT: - gpio = priv->cfg.gpio_dvbt; - break; - case SYS_DVBT2: - gpio = priv->cfg.gpio_dvbt2; - break; - case SYS_DVBC_ANNEX_AC: - gpio = priv->cfg.gpio_dvbc; - break; - default: - ret = -EINVAL; - goto error; - } + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); /* update GPIOs only when needed */ if (!memcmp(gpio, priv->gpio, sizeof(priv->gpio))) @@ -217,10 +202,12 @@ int cxd2820r_gpio(struct dvb_frontend *fe) else tmp1 |= (0 << (0 + i)); - dbg("%s: GPIO i=%d %02x %02x", __func__, i, tmp0, tmp1); + dev_dbg(&priv->i2c->dev, "%s: gpio i=%d %02x %02x\n", __func__, + i, tmp0, tmp1); } - dbg("%s: wr gpio=%02x %02x", __func__, tmp0, tmp1); + dev_dbg(&priv->i2c->dev, "%s: wr gpio=%02x %02x\n", __func__, tmp0, + tmp1); /* write bits [7:2] */ ret = cxd2820r_wr_reg_mask(priv, 0x00089, tmp0, 0xfc); @@ -236,7 +223,7 @@ int cxd2820r_gpio(struct dvb_frontend *fe) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -248,10 +235,13 @@ u32 cxd2820r_div_u64_round_closest(u64 dividend, u32 divisor) static int cxd2820r_set_frontend(struct dvb_frontend *fe) { + struct cxd2820r_priv *priv = fe->demodulator_priv; struct dtv_frontend_properties *c = &fe->dtv_property_cache; int ret; - dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + switch (c->delivery_system) { case SYS_DVBT: ret = cxd2820r_init_t(fe); @@ -278,7 +268,8 @@ static int cxd2820r_set_frontend(struct dvb_frontend *fe) goto err; break; default: - dbg("%s: error state=%d", __func__, fe->dtv_property_cache.delivery_system); + dev_dbg(&priv->i2c->dev, "%s: error state=%d\n", __func__, + fe->dtv_property_cache.delivery_system); ret = -EINVAL; break; } @@ -287,9 +278,12 @@ static int cxd2820r_set_frontend(struct dvb_frontend *fe) } static int cxd2820r_read_status(struct dvb_frontend *fe, fe_status_t *status) { + struct cxd2820r_priv *priv = fe->demodulator_priv; int ret; - dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + switch (fe->dtv_property_cache.delivery_system) { case SYS_DVBT: ret = cxd2820r_read_status_t(fe, status); @@ -312,7 +306,8 @@ static int cxd2820r_get_frontend(struct dvb_frontend *fe) struct cxd2820r_priv *priv = fe->demodulator_priv; int ret; - dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); if (priv->delivery_system == SYS_UNDEFINED) return 0; @@ -336,9 +331,12 @@ static int cxd2820r_get_frontend(struct dvb_frontend *fe) static int cxd2820r_read_ber(struct dvb_frontend *fe, u32 *ber) { + struct cxd2820r_priv *priv = fe->demodulator_priv; int ret; - dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + switch (fe->dtv_property_cache.delivery_system) { case SYS_DVBT: ret = cxd2820r_read_ber_t(fe, ber); @@ -358,9 +356,12 @@ static int cxd2820r_read_ber(struct dvb_frontend *fe, u32 *ber) static int cxd2820r_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { + struct cxd2820r_priv *priv = fe->demodulator_priv; int ret; - dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + switch (fe->dtv_property_cache.delivery_system) { case SYS_DVBT: ret = cxd2820r_read_signal_strength_t(fe, strength); @@ -380,9 +381,12 @@ static int cxd2820r_read_signal_strength(struct dvb_frontend *fe, u16 *strength) static int cxd2820r_read_snr(struct dvb_frontend *fe, u16 *snr) { + struct cxd2820r_priv *priv = fe->demodulator_priv; int ret; - dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + switch (fe->dtv_property_cache.delivery_system) { case SYS_DVBT: ret = cxd2820r_read_snr_t(fe, snr); @@ -402,9 +406,12 @@ static int cxd2820r_read_snr(struct dvb_frontend *fe, u16 *snr) static int cxd2820r_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) { + struct cxd2820r_priv *priv = fe->demodulator_priv; int ret; - dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + switch (fe->dtv_property_cache.delivery_system) { case SYS_DVBT: ret = cxd2820r_read_ucblocks_t(fe, ucblocks); @@ -429,9 +436,12 @@ static int cxd2820r_init(struct dvb_frontend *fe) static int cxd2820r_sleep(struct dvb_frontend *fe) { + struct cxd2820r_priv *priv = fe->demodulator_priv; int ret; - dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + switch (fe->dtv_property_cache.delivery_system) { case SYS_DVBT: ret = cxd2820r_sleep_t(fe); @@ -452,9 +462,12 @@ static int cxd2820r_sleep(struct dvb_frontend *fe) static int cxd2820r_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *s) { + struct cxd2820r_priv *priv = fe->demodulator_priv; int ret; - dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); + switch (fe->dtv_property_cache.delivery_system) { case SYS_DVBT: ret = cxd2820r_get_tune_settings_t(fe, s); @@ -478,7 +491,9 @@ static enum dvbfe_search cxd2820r_search(struct dvb_frontend *fe) struct dtv_frontend_properties *c = &fe->dtv_property_cache; int ret, i; fe_status_t status = 0; - dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); + + dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__, + fe->dtv_property_cache.delivery_system); /* switch between DVB-T and DVB-T2 when tune fails */ if (priv->last_tune_failed) { @@ -520,7 +535,7 @@ static enum dvbfe_search cxd2820r_search(struct dvb_frontend *fe) /* wait frontend lock */ for (; i > 0; i--) { - dbg("%s: LOOP=%d", __func__, i); + dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); msleep(50); ret = cxd2820r_read_status(fe, &status); if (ret) @@ -540,7 +555,7 @@ static enum dvbfe_search cxd2820r_search(struct dvb_frontend *fe) } error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return DVBFE_ALGO_SEARCH_ERROR; } @@ -552,8 +567,19 @@ static int cxd2820r_get_frontend_algo(struct dvb_frontend *fe) static void cxd2820r_release(struct dvb_frontend *fe) { struct cxd2820r_priv *priv = fe->demodulator_priv; - dbg("%s", __func__); + int uninitialized_var(ret); /* silence compiler warning */ + dev_dbg(&priv->i2c->dev, "%s\n", __func__); + +#ifdef CONFIG_GPIOLIB + /* remove GPIOs */ + if (priv->gpio_chip.label) { + ret = gpiochip_remove(&priv->gpio_chip); + if (ret) + dev_err(&priv->i2c->dev, "%s: gpiochip_remove() " \ + "failed=%d\n", KBUILD_MODNAME, ret); + } +#endif kfree(priv); return; } @@ -561,12 +587,56 @@ static void cxd2820r_release(struct dvb_frontend *fe) static int cxd2820r_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { struct cxd2820r_priv *priv = fe->demodulator_priv; - dbg("%s: %d", __func__, enable); + + dev_dbg(&priv->i2c->dev, "%s: %d\n", __func__, enable); /* Bit 0 of reg 0xdb in bank 0x00 controls I2C repeater */ return cxd2820r_wr_reg_mask(priv, 0xdb, enable ? 1 : 0, 0x1); } +#ifdef CONFIG_GPIOLIB +static int cxd2820r_gpio_direction_output(struct gpio_chip *chip, unsigned nr, + int val) +{ + struct cxd2820r_priv *priv = + container_of(chip, struct cxd2820r_priv, gpio_chip); + u8 gpio[GPIO_COUNT]; + + dev_dbg(&priv->i2c->dev, "%s: nr=%d val=%d\n", __func__, nr, val); + + memcpy(gpio, priv->gpio, sizeof(gpio)); + gpio[nr] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | (val << 2); + + return cxd2820r_gpio(&priv->fe, gpio); +} + +static void cxd2820r_gpio_set(struct gpio_chip *chip, unsigned nr, int val) +{ + struct cxd2820r_priv *priv = + container_of(chip, struct cxd2820r_priv, gpio_chip); + u8 gpio[GPIO_COUNT]; + + dev_dbg(&priv->i2c->dev, "%s: nr=%d val=%d\n", __func__, nr, val); + + memcpy(gpio, priv->gpio, sizeof(gpio)); + gpio[nr] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | (val << 2); + + (void) cxd2820r_gpio(&priv->fe, gpio); + + return; +} + +static int cxd2820r_gpio_get(struct gpio_chip *chip, unsigned nr) +{ + struct cxd2820r_priv *priv = + container_of(chip, struct cxd2820r_priv, gpio_chip); + + dev_dbg(&priv->i2c->dev, "%s: nr=%d\n", __func__, nr); + + return (priv->gpio[nr] >> 2) & 0x01; +} +#endif + static const struct dvb_frontend_ops cxd2820r_ops = { .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A }, /* default: DVB-T/T2 */ @@ -613,29 +683,70 @@ static const struct dvb_frontend_ops cxd2820r_ops = { }; struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg, - struct i2c_adapter *i2c) + struct i2c_adapter *i2c, int *gpio_chip_base +) { - struct cxd2820r_priv *priv = NULL; + struct cxd2820r_priv *priv; int ret; - u8 tmp; + u8 tmp, gpio[GPIO_COUNT]; - priv = kzalloc(sizeof (struct cxd2820r_priv), GFP_KERNEL); - if (!priv) + priv = kzalloc(sizeof(struct cxd2820r_priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + dev_err(&i2c->dev, "%s: kzalloc() failed\n", + KBUILD_MODNAME); goto error; + } priv->i2c = i2c; - memcpy(&priv->cfg, cfg, sizeof (struct cxd2820r_config)); + memcpy(&priv->cfg, cfg, sizeof(struct cxd2820r_config)); + memcpy(&priv->fe.ops, &cxd2820r_ops, sizeof(struct dvb_frontend_ops)); + priv->fe.demodulator_priv = priv; priv->bank[0] = priv->bank[1] = 0xff; ret = cxd2820r_rd_reg(priv, 0x000fd, &tmp); - dbg("%s: chip id=%02x", __func__, tmp); + dev_dbg(&priv->i2c->dev, "%s: chip id=%02x\n", __func__, tmp); if (ret || tmp != 0xe1) goto error; - memcpy(&priv->fe.ops, &cxd2820r_ops, sizeof (struct dvb_frontend_ops)); - priv->fe.demodulator_priv = priv; + if (gpio_chip_base) { +#ifdef CONFIG_GPIOLIB + /* add GPIOs */ + priv->gpio_chip.label = KBUILD_MODNAME; + priv->gpio_chip.dev = &priv->i2c->dev; + priv->gpio_chip.owner = THIS_MODULE; + priv->gpio_chip.direction_output = + cxd2820r_gpio_direction_output; + priv->gpio_chip.set = cxd2820r_gpio_set; + priv->gpio_chip.get = cxd2820r_gpio_get; + priv->gpio_chip.base = -1; /* dynamic allocation */ + priv->gpio_chip.ngpio = GPIO_COUNT; + priv->gpio_chip.can_sleep = 1; + ret = gpiochip_add(&priv->gpio_chip); + if (ret) + goto error; + + dev_dbg(&priv->i2c->dev, "%s: gpio_chip.base=%d\n", __func__, + priv->gpio_chip.base); + + *gpio_chip_base = priv->gpio_chip.base; +#else + /* + * Use static GPIO configuration if GPIOLIB is undefined. + * This is fallback condition. + */ + gpio[0] = (*gpio_chip_base >> 0) & 0x07; + gpio[1] = (*gpio_chip_base >> 3) & 0x07; + gpio[2] = 0; + ret = cxd2820r_gpio(&priv->fe, gpio); + if (ret) + goto error; +#endif + } + return &priv->fe; error: + dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); kfree(priv); return NULL; } diff --git a/drivers/media/dvb/frontends/cxd2820r_priv.h b/drivers/media/dvb-frontends/cxd2820r_priv.h similarity index 89% rename from drivers/media/dvb/frontends/cxd2820r_priv.h rename to drivers/media/dvb-frontends/cxd2820r_priv.h index 9a9822cad9cd59de41dce73474c51f44fa0e802c..7ff5f60c83e1f29d7600c1bd3169c813a6045d8e 100644 --- a/drivers/media/dvb/frontends/cxd2820r_priv.h +++ b/drivers/media/dvb-frontends/cxd2820r_priv.h @@ -26,19 +26,7 @@ #include "dvb_frontend.h" #include "dvb_math.h" #include "cxd2820r.h" - -#define LOG_PREFIX "cxd2820r" - -#undef dbg -#define dbg(f, arg...) \ - if (cxd2820r_debug) \ - printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) -#undef err -#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) -#undef info -#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) -#undef warn -#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg) +#include struct reg_val_mask { u32 reg; @@ -54,7 +42,11 @@ struct cxd2820r_priv { bool ber_running; u8 bank[2]; - u8 gpio[3]; +#define GPIO_COUNT 3 + u8 gpio[GPIO_COUNT]; +#ifdef CONFIG_GPIOLIB + struct gpio_chip gpio_chip; +#endif fe_delivery_system_t delivery_system; bool last_tune_failed; /* for switch between T and T2 tune */ @@ -64,7 +56,7 @@ struct cxd2820r_priv { extern int cxd2820r_debug; -int cxd2820r_gpio(struct dvb_frontend *fe); +int cxd2820r_gpio(struct dvb_frontend *fe, u8 *gpio); int cxd2820r_wr_reg_mask(struct cxd2820r_priv *priv, u32 reg, u8 val, u8 mask); diff --git a/drivers/media/dvb/frontends/cxd2820r_t.c b/drivers/media/dvb-frontends/cxd2820r_t.c similarity index 91% rename from drivers/media/dvb/frontends/cxd2820r_t.c rename to drivers/media/dvb-frontends/cxd2820r_t.c index 1a026239cdcc081afeb2b3f6d3e172d73a4c224c..fa184ca2dd687de442b38db531ab108038b77b27 100644 --- a/drivers/media/dvb/frontends/cxd2820r_t.c +++ b/drivers/media/dvb-frontends/cxd2820r_t.c @@ -54,7 +54,8 @@ int cxd2820r_set_frontend_t(struct dvb_frontend *fe) { 0x00427, 0x41, 0xff }, }; - dbg("%s: RF=%d BW=%d", __func__, c->frequency, c->bandwidth_hz); + dev_dbg(&priv->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", __func__, + c->frequency, c->bandwidth_hz); switch (c->bandwidth_hz) { case 6000000: @@ -73,11 +74,6 @@ int cxd2820r_set_frontend_t(struct dvb_frontend *fe) return -EINVAL; } - /* update GPIOs */ - ret = cxd2820r_gpio(fe); - if (ret) - goto error; - /* program tuner */ if (fe->ops.tuner_ops.set_params) fe->ops.tuner_ops.set_params(fe); @@ -102,7 +98,7 @@ int cxd2820r_set_frontend_t(struct dvb_frontend *fe) } else if_freq = 0; - dbg("%s: if_freq=%d", __func__, if_freq); + dev_dbg(&priv->i2c->dev, "%s: if_freq=%d\n", __func__, if_freq); num = if_freq / 1000; /* Hz => kHz */ num *= 0x1000000; @@ -137,7 +133,7 @@ int cxd2820r_set_frontend_t(struct dvb_frontend *fe) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -254,7 +250,7 @@ int cxd2820r_get_frontend_t(struct dvb_frontend *fe) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -288,7 +284,7 @@ int cxd2820r_read_ber_t(struct dvb_frontend *fe, u32 *ber) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -312,7 +308,7 @@ int cxd2820r_read_signal_strength_t(struct dvb_frontend *fe, return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -336,11 +332,12 @@ int cxd2820r_read_snr_t(struct dvb_frontend *fe, u16 *snr) else *snr = 0; - dbg("%s: dBx10=%d val=%04x", __func__, *snr, tmp); + dev_dbg(&priv->i2c->dev, "%s: dBx10=%d val=%04x\n", __func__, *snr, + tmp); return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -389,12 +386,11 @@ int cxd2820r_read_status_t(struct dvb_frontend *fe, fe_status_t *status) } } - dbg("%s: lock=%02x %02x %02x %02x", __func__, - buf[0], buf[1], buf[2], buf[3]); + dev_dbg(&priv->i2c->dev, "%s: lock=%*ph\n", __func__, 4, buf); return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -409,7 +405,7 @@ int cxd2820r_init_t(struct dvb_frontend *fe) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -425,7 +421,7 @@ int cxd2820r_sleep_t(struct dvb_frontend *fe) { 0x00080, 0x00, 0xff }, }; - dbg("%s", __func__); + dev_dbg(&priv->i2c->dev, "%s\n", __func__); priv->delivery_system = SYS_UNDEFINED; @@ -438,7 +434,7 @@ int cxd2820r_sleep_t(struct dvb_frontend *fe) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } diff --git a/drivers/media/dvb/frontends/cxd2820r_t2.c b/drivers/media/dvb-frontends/cxd2820r_t2.c similarity index 91% rename from drivers/media/dvb/frontends/cxd2820r_t2.c rename to drivers/media/dvb-frontends/cxd2820r_t2.c index 3a5759e0d2352c3d6753acd400bd9d32442e6cdf..e82d82a7a2ebb6e3c8c40e1d6fc4886f0e8fbde9 100644 --- a/drivers/media/dvb/frontends/cxd2820r_t2.c +++ b/drivers/media/dvb-frontends/cxd2820r_t2.c @@ -68,7 +68,8 @@ int cxd2820r_set_frontend_t2(struct dvb_frontend *fe) { 0x027ef, 0x10, 0x18 }, }; - dbg("%s: RF=%d BW=%d", __func__, c->frequency, c->bandwidth_hz); + dev_dbg(&priv->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", __func__, + c->frequency, c->bandwidth_hz); switch (c->bandwidth_hz) { case 5000000: @@ -91,11 +92,6 @@ int cxd2820r_set_frontend_t2(struct dvb_frontend *fe) return -EINVAL; } - /* update GPIOs */ - ret = cxd2820r_gpio(fe); - if (ret) - goto error; - /* program tuner */ if (fe->ops.tuner_ops.set_params) fe->ops.tuner_ops.set_params(fe); @@ -119,7 +115,7 @@ int cxd2820r_set_frontend_t2(struct dvb_frontend *fe) } else if_freq = 0; - dbg("%s: if_freq=%d", __func__, if_freq); + dev_dbg(&priv->i2c->dev, "%s: if_freq=%d\n", __func__, if_freq); num = if_freq / 1000; /* Hz => kHz */ num *= 0x1000000; @@ -150,7 +146,7 @@ int cxd2820r_set_frontend_t2(struct dvb_frontend *fe) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -266,7 +262,7 @@ int cxd2820r_get_frontend_t2(struct dvb_frontend *fe) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -291,11 +287,11 @@ int cxd2820r_read_status_t2(struct dvb_frontend *fe, fe_status_t *status) } } - dbg("%s: lock=%02x", __func__, buf[0]); + dev_dbg(&priv->i2c->dev, "%s: lock=%02x\n", __func__, buf[0]); return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -322,7 +318,7 @@ int cxd2820r_read_ber_t2(struct dvb_frontend *fe, u32 *ber) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -346,7 +342,7 @@ int cxd2820r_read_signal_strength_t2(struct dvb_frontend *fe, return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -370,11 +366,12 @@ int cxd2820r_read_snr_t2(struct dvb_frontend *fe, u16 *snr) else *snr = 0; - dbg("%s: dBx10=%d val=%04x", __func__, *snr, tmp); + dev_dbg(&priv->i2c->dev, "%s: dBx10=%d val=%04x\n", __func__, *snr, + tmp); return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -398,7 +395,7 @@ int cxd2820r_sleep_t2(struct dvb_frontend *fe) { 0x00080, 0x00, 0xff }, }; - dbg("%s", __func__); + dev_dbg(&priv->i2c->dev, "%s\n", __func__); for (i = 0; i < ARRAY_SIZE(tab); i++) { ret = cxd2820r_wr_reg_mask(priv, tab[i].reg, tab[i].val, @@ -411,7 +408,7 @@ int cxd2820r_sleep_t2(struct dvb_frontend *fe) return ret; error: - dbg("%s: failed:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } diff --git a/drivers/media/dvb/frontends/dib0070.c b/drivers/media/dvb-frontends/dib0070.c similarity index 100% rename from drivers/media/dvb/frontends/dib0070.c rename to drivers/media/dvb-frontends/dib0070.c diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb-frontends/dib0070.h similarity index 100% rename from drivers/media/dvb/frontends/dib0070.h rename to drivers/media/dvb-frontends/dib0070.h diff --git a/drivers/media/dvb/frontends/dib0090.c b/drivers/media/dvb-frontends/dib0090.c similarity index 100% rename from drivers/media/dvb/frontends/dib0090.c rename to drivers/media/dvb-frontends/dib0090.c diff --git a/drivers/media/dvb/frontends/dib0090.h b/drivers/media/dvb-frontends/dib0090.h similarity index 100% rename from drivers/media/dvb/frontends/dib0090.h rename to drivers/media/dvb-frontends/dib0090.h diff --git a/drivers/media/dvb/frontends/dib3000.h b/drivers/media/dvb-frontends/dib3000.h similarity index 100% rename from drivers/media/dvb/frontends/dib3000.h rename to drivers/media/dvb-frontends/dib3000.h diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb-frontends/dib3000mb.c similarity index 100% rename from drivers/media/dvb/frontends/dib3000mb.c rename to drivers/media/dvb-frontends/dib3000mb.c diff --git a/drivers/media/dvb/frontends/dib3000mb_priv.h b/drivers/media/dvb-frontends/dib3000mb_priv.h similarity index 100% rename from drivers/media/dvb/frontends/dib3000mb_priv.h rename to drivers/media/dvb-frontends/dib3000mb_priv.h diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb-frontends/dib3000mc.c similarity index 100% rename from drivers/media/dvb/frontends/dib3000mc.c rename to drivers/media/dvb-frontends/dib3000mc.c diff --git a/drivers/media/dvb/frontends/dib3000mc.h b/drivers/media/dvb-frontends/dib3000mc.h similarity index 100% rename from drivers/media/dvb/frontends/dib3000mc.h rename to drivers/media/dvb-frontends/dib3000mc.h diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb-frontends/dib7000m.c similarity index 100% rename from drivers/media/dvb/frontends/dib7000m.c rename to drivers/media/dvb-frontends/dib7000m.c diff --git a/drivers/media/dvb/frontends/dib7000m.h b/drivers/media/dvb-frontends/dib7000m.h similarity index 100% rename from drivers/media/dvb/frontends/dib7000m.h rename to drivers/media/dvb-frontends/dib7000m.h diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb-frontends/dib7000p.c similarity index 100% rename from drivers/media/dvb/frontends/dib7000p.c rename to drivers/media/dvb-frontends/dib7000p.c diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb-frontends/dib7000p.h similarity index 100% rename from drivers/media/dvb/frontends/dib7000p.h rename to drivers/media/dvb-frontends/dib7000p.h diff --git a/drivers/media/dvb/frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c similarity index 100% rename from drivers/media/dvb/frontends/dib8000.c rename to drivers/media/dvb-frontends/dib8000.c diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb-frontends/dib8000.h similarity index 100% rename from drivers/media/dvb/frontends/dib8000.h rename to drivers/media/dvb-frontends/dib8000.h diff --git a/drivers/media/dvb/frontends/dib9000.c b/drivers/media/dvb-frontends/dib9000.c similarity index 100% rename from drivers/media/dvb/frontends/dib9000.c rename to drivers/media/dvb-frontends/dib9000.c diff --git a/drivers/media/dvb/frontends/dib9000.h b/drivers/media/dvb-frontends/dib9000.h similarity index 100% rename from drivers/media/dvb/frontends/dib9000.h rename to drivers/media/dvb-frontends/dib9000.h diff --git a/drivers/media/dvb/frontends/dibx000_common.c b/drivers/media/dvb-frontends/dibx000_common.c similarity index 100% rename from drivers/media/dvb/frontends/dibx000_common.c rename to drivers/media/dvb-frontends/dibx000_common.c diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb-frontends/dibx000_common.h similarity index 100% rename from drivers/media/dvb/frontends/dibx000_common.h rename to drivers/media/dvb-frontends/dibx000_common.h diff --git a/drivers/media/dvb/frontends/drxd.h b/drivers/media/dvb-frontends/drxd.h similarity index 100% rename from drivers/media/dvb/frontends/drxd.h rename to drivers/media/dvb-frontends/drxd.h diff --git a/drivers/media/dvb/frontends/drxd_firm.c b/drivers/media/dvb-frontends/drxd_firm.c similarity index 100% rename from drivers/media/dvb/frontends/drxd_firm.c rename to drivers/media/dvb-frontends/drxd_firm.c diff --git a/drivers/media/dvb/frontends/drxd_firm.h b/drivers/media/dvb-frontends/drxd_firm.h similarity index 100% rename from drivers/media/dvb/frontends/drxd_firm.h rename to drivers/media/dvb-frontends/drxd_firm.h diff --git a/drivers/media/dvb/frontends/drxd_hard.c b/drivers/media/dvb-frontends/drxd_hard.c similarity index 100% rename from drivers/media/dvb/frontends/drxd_hard.c rename to drivers/media/dvb-frontends/drxd_hard.c diff --git a/drivers/media/dvb/frontends/drxd_map_firm.h b/drivers/media/dvb-frontends/drxd_map_firm.h similarity index 100% rename from drivers/media/dvb/frontends/drxd_map_firm.h rename to drivers/media/dvb-frontends/drxd_map_firm.h diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb-frontends/drxk.h similarity index 95% rename from drivers/media/dvb/frontends/drxk.h rename to drivers/media/dvb-frontends/drxk.h index d615d7d055a29dfba39b3fd6e9879830cd96a080..94fecfbf14c1278d70669e18d1b5c4a7d6ebdaf7 100644 --- a/drivers/media/dvb/frontends/drxk.h +++ b/drivers/media/dvb-frontends/drxk.h @@ -28,6 +28,7 @@ * A value of 0 (default) or lower indicates that * the correct number of parameters will be * automatically detected. + * @load_firmware_sync: Force the firmware load to be synchronous. * * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is * UIO-3. @@ -39,6 +40,7 @@ struct drxk_config { bool parallel_ts; bool dynamic_clk; bool enable_merr_cfg; + bool load_firmware_sync; bool antenna_dvbt; u16 antenna_gpio; diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c similarity index 99% rename from drivers/media/dvb/frontends/drxk_hard.c rename to drivers/media/dvb-frontends/drxk_hard.c index 1ab8154542daebc056912efbdb7866bedae7304d..8b4c6d5f8f3694d330dfd50d36ae9ef870af4339 100644 --- a/drivers/media/dvb/frontends/drxk_hard.c +++ b/drivers/media/dvb-frontends/drxk_hard.c @@ -6609,15 +6609,25 @@ struct dvb_frontend *drxk_attach(const struct drxk_config *config, /* Load firmware and initialize DRX-K */ if (state->microcode_name) { - status = request_firmware_nowait(THIS_MODULE, 1, + if (config->load_firmware_sync) { + const struct firmware *fw = NULL; + + status = request_firmware(&fw, state->microcode_name, + state->i2c->dev.parent); + if (status < 0) + fw = NULL; + load_firmware_cb(fw, state); + } else { + status = request_firmware_nowait(THIS_MODULE, 1, state->microcode_name, state->i2c->dev.parent, GFP_KERNEL, state, load_firmware_cb); - if (status < 0) { - printk(KERN_ERR - "drxk: failed to request a firmware\n"); - return NULL; + if (status < 0) { + printk(KERN_ERR + "drxk: failed to request a firmware\n"); + return NULL; + } } } else if (init_drxk(state) < 0) goto error; diff --git a/drivers/media/dvb/frontends/drxk_hard.h b/drivers/media/dvb-frontends/drxk_hard.h similarity index 100% rename from drivers/media/dvb/frontends/drxk_hard.h rename to drivers/media/dvb-frontends/drxk_hard.h diff --git a/drivers/media/dvb/frontends/drxk_map.h b/drivers/media/dvb-frontends/drxk_map.h similarity index 100% rename from drivers/media/dvb/frontends/drxk_map.h rename to drivers/media/dvb-frontends/drxk_map.h diff --git a/drivers/media/dvb/frontends/ds3000.c b/drivers/media/dvb-frontends/ds3000.c similarity index 100% rename from drivers/media/dvb/frontends/ds3000.c rename to drivers/media/dvb-frontends/ds3000.c diff --git a/drivers/media/dvb/frontends/ds3000.h b/drivers/media/dvb-frontends/ds3000.h similarity index 100% rename from drivers/media/dvb/frontends/ds3000.h rename to drivers/media/dvb-frontends/ds3000.h diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb-frontends/dvb-pll.c similarity index 96% rename from drivers/media/dvb/frontends/dvb-pll.c rename to drivers/media/dvb-frontends/dvb-pll.c index 1ab34838221c0b14d09bdfec5bb67bbce382bd1c..6d8fe884323714f89392ecf221e81f3c6b8b0214 100644 --- a/drivers/media/dvb/frontends/dvb-pll.c +++ b/drivers/media/dvb-frontends/dvb-pll.c @@ -116,6 +116,31 @@ static struct dvb_pll_desc dvb_pll_thomson_dtt759x = { }, }; +static void thomson_dtt7520x_bw(struct dvb_frontend *fe, u8 *buf) +{ + u32 bw = fe->dtv_property_cache.bandwidth_hz; + if (bw == 8000000) + buf[3] ^= 0x10; +} + +static struct dvb_pll_desc dvb_pll_thomson_dtt7520x = { + .name = "Thomson dtt7520x", + .min = 185000000, + .max = 900000000, + .set = thomson_dtt7520x_bw, + .iffreq = 36166667, + .count = 7, + .entries = { + { 305000000, 166667, 0xb4, 0x12 }, + { 405000000, 166667, 0xbc, 0x12 }, + { 445000000, 166667, 0xbc, 0x12 }, + { 465000000, 166667, 0xf4, 0x18 }, + { 735000000, 166667, 0xfc, 0x18 }, + { 835000000, 166667, 0xbc, 0x18 }, + { 999999999, 166667, 0xfc, 0x18 }, + }, +}; + static struct dvb_pll_desc dvb_pll_lg_z201 = { .name = "LG z201", .min = 174000000, @@ -513,6 +538,7 @@ static struct dvb_pll_desc *pll_list[] = { [DVB_PLL_UNDEFINED] = NULL, [DVB_PLL_THOMSON_DTT7579] = &dvb_pll_thomson_dtt7579, [DVB_PLL_THOMSON_DTT759X] = &dvb_pll_thomson_dtt759x, + [DVB_PLL_THOMSON_DTT7520X] = &dvb_pll_thomson_dtt7520x, [DVB_PLL_LG_Z201] = &dvb_pll_lg_z201, [DVB_PLL_UNKNOWN_1] = &dvb_pll_unknown_1, [DVB_PLL_TUA6010XS] = &dvb_pll_tua6010xs, diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb-frontends/dvb-pll.h similarity index 97% rename from drivers/media/dvb/frontends/dvb-pll.h rename to drivers/media/dvb-frontends/dvb-pll.h index 086964344c38bd180d0fe6f798d918f48d7edada..4de754f76ce95d8b7183f76117579c7e0d128b54 100644 --- a/drivers/media/dvb/frontends/dvb-pll.h +++ b/drivers/media/dvb-frontends/dvb-pll.h @@ -27,6 +27,7 @@ #define DVB_PLL_SAMSUNG_TBDU18132 16 #define DVB_PLL_SAMSUNG_TBMU24112 17 #define DVB_PLL_TDEE4 18 +#define DVB_PLL_THOMSON_DTT7520X 19 /** * Attach a dvb-pll to the supplied frontend structure. diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb-frontends/dvb_dummy_fe.c similarity index 100% rename from drivers/media/dvb/frontends/dvb_dummy_fe.c rename to drivers/media/dvb-frontends/dvb_dummy_fe.c diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.h b/drivers/media/dvb-frontends/dvb_dummy_fe.h similarity index 100% rename from drivers/media/dvb/frontends/dvb_dummy_fe.h rename to drivers/media/dvb-frontends/dvb_dummy_fe.h diff --git a/drivers/media/dvb/frontends/ec100.c b/drivers/media/dvb-frontends/ec100.c similarity index 87% rename from drivers/media/dvb/frontends/ec100.c rename to drivers/media/dvb-frontends/ec100.c index c56fddbf53b77b56b5cb9ea4c1ca34e59e6e96d0..9d424809d06b7dcb7f680491ce700078073ba30e 100644 --- a/drivers/media/dvb/frontends/ec100.c +++ b/drivers/media/dvb-frontends/ec100.c @@ -20,13 +20,8 @@ */ #include "dvb_frontend.h" -#include "ec100_priv.h" #include "ec100.h" -int ec100_debug; -module_param_named(debug, ec100_debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); - struct ec100_state { struct i2c_adapter *i2c; struct dvb_frontend frontend; @@ -38,23 +33,33 @@ struct ec100_state { /* write single register */ static int ec100_write_reg(struct ec100_state *state, u8 reg, u8 val) { + int ret; u8 buf[2] = {reg, val}; - struct i2c_msg msg = { - .addr = state->config.demod_address, - .flags = 0, - .len = 2, - .buf = buf}; - - if (i2c_transfer(state->i2c, &msg, 1) != 1) { - warn("I2C write failed reg:%02x", reg); - return -EREMOTEIO; + struct i2c_msg msg[1] = { + { + .addr = state->config.demod_address, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + } + }; + + ret = i2c_transfer(state->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + dev_warn(&state->i2c->dev, "%s: i2c wr failed=%d reg=%02x\n", + KBUILD_MODNAME, ret, reg); + ret = -EREMOTEIO; } - return 0; + + return ret; } /* read single register */ static int ec100_read_reg(struct ec100_state *state, u8 reg, u8 *val) { + int ret; struct i2c_msg msg[2] = { { .addr = state->config.demod_address, @@ -69,11 +74,16 @@ static int ec100_read_reg(struct ec100_state *state, u8 reg, u8 *val) } }; - if (i2c_transfer(state->i2c, msg, 2) != 2) { - warn("I2C read failed reg:%02x", reg); - return -EREMOTEIO; + ret = i2c_transfer(state->i2c, msg, 2); + if (ret == 2) { + ret = 0; + } else { + dev_warn(&state->i2c->dev, "%s: i2c rd failed=%d reg=%02x\n", + KBUILD_MODNAME, ret, reg); + ret = -EREMOTEIO; } - return 0; + + return ret; } static int ec100_set_frontend(struct dvb_frontend *fe) @@ -83,8 +93,8 @@ static int ec100_set_frontend(struct dvb_frontend *fe) int ret; u8 tmp, tmp2; - deb_info("%s: freq:%d bw:%d\n", __func__, c->frequency, - c->bandwidth_hz); + dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", + __func__, c->frequency, c->bandwidth_hz); /* program tuner */ if (fe->ops.tuner_ops.set_params) @@ -150,7 +160,7 @@ static int ec100_set_frontend(struct dvb_frontend *fe) return ret; error: - deb_info("%s: failed:%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -196,7 +206,7 @@ static int ec100_read_status(struct dvb_frontend *fe, fe_status_t *status) return ret; error: - deb_info("%s: failed:%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -228,7 +238,7 @@ static int ec100_read_ber(struct dvb_frontend *fe, u32 *ber) return ret; error: - deb_info("%s: failed:%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -248,7 +258,7 @@ static int ec100_read_signal_strength(struct dvb_frontend *fe, u16 *strength) return ret; error: - deb_info("%s: failed:%d\n", __func__, ret); + dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } diff --git a/drivers/media/dvb/frontends/ec100.h b/drivers/media/dvb-frontends/ec100.h similarity index 95% rename from drivers/media/dvb/frontends/ec100.h rename to drivers/media/dvb-frontends/ec100.h index ee8e52417958e0df45069df12edfff66a882b3c1..b8479719d7f1e22d2d437ff1d790b83ec464224f 100644 --- a/drivers/media/dvb/frontends/ec100.h +++ b/drivers/media/dvb-frontends/ec100.h @@ -38,7 +38,7 @@ extern struct dvb_frontend *ec100_attach(const struct ec100_config *config, static inline struct dvb_frontend *ec100_attach( const struct ec100_config *config, struct i2c_adapter *i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + pr_warn("%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif diff --git a/drivers/media/dvb/frontends/eds1547.h b/drivers/media/dvb-frontends/eds1547.h similarity index 100% rename from drivers/media/dvb/frontends/eds1547.h rename to drivers/media/dvb-frontends/eds1547.h diff --git a/drivers/media/dvb/frontends/hd29l2.c b/drivers/media/dvb-frontends/hd29l2.c similarity index 89% rename from drivers/media/dvb/frontends/hd29l2.c rename to drivers/media/dvb-frontends/hd29l2.c index a00318190837af051d834124f96f94832de21724..d7b9d549156d4d923e6ea9c7a988c0849725dd0c 100644 --- a/drivers/media/dvb/frontends/hd29l2.c +++ b/drivers/media/dvb-frontends/hd29l2.c @@ -22,10 +22,6 @@ #include "hd29l2_priv.h" -int hd29l2_debug; -module_param_named(debug, hd29l2_debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); - /* write multiple registers */ static int hd29l2_wr_regs(struct hd29l2_priv *priv, u8 reg, u8 *val, int len) { @@ -48,7 +44,9 @@ static int hd29l2_wr_regs(struct hd29l2_priv *priv, u8 reg, u8 *val, int len) if (ret == 1) { ret = 0; } else { - warn("i2c wr failed=%d reg=%02x len=%d", ret, reg, len); + dev_warn(&priv->i2c->dev, + "%s: i2c wr failed=%d reg=%02x len=%d\n", + KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } @@ -78,7 +76,9 @@ static int hd29l2_rd_regs(struct hd29l2_priv *priv, u8 reg, u8 *val, int len) if (ret == 2) { ret = 0; } else { - warn("i2c rd failed=%d reg=%02x len=%d", ret, reg, len); + dev_warn(&priv->i2c->dev, + "%s: i2c rd failed=%d reg=%02x len=%d\n", + KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } @@ -160,7 +160,7 @@ static int hd29l2_soft_reset(struct hd29l2_priv *priv) return 0; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -170,7 +170,7 @@ static int hd29l2_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) struct hd29l2_priv *priv = fe->demodulator_priv; u8 tmp; - dbg("%s: enable=%d", __func__, enable); + dev_dbg(&priv->i2c->dev, "%s: enable=%d\n", __func__, enable); /* set tuner address for demod */ if (!priv->tuner_i2c_addr_programmed && enable) { @@ -199,11 +199,11 @@ static int hd29l2_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) usleep_range(5000, 10000); } - dbg("%s: loop=%d", __func__, i); + dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -238,7 +238,7 @@ static int hd29l2_read_status(struct dvb_frontend *fe, fe_status_t *status) return 0; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -270,7 +270,7 @@ static int hd29l2_read_snr(struct dvb_frontend *fe, u16 *snr) return 0; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -295,7 +295,7 @@ static int hd29l2_read_signal_strength(struct dvb_frontend *fe, u16 *strength) return 0; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -322,7 +322,7 @@ static int hd29l2_read_ber(struct dvb_frontend *fe, u32 *ber) return 0; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -344,11 +344,12 @@ static enum dvbfe_search hd29l2_search(struct dvb_frontend *fe) u32 if_freq, if_ctl; bool auto_mode; - dbg("%s: delivery_system=%d frequency=%d bandwidth_hz=%d " \ - "modulation=%d inversion=%d fec_inner=%d guard_interval=%d", - __func__, - c->delivery_system, c->frequency, c->bandwidth_hz, - c->modulation, c->inversion, c->fec_inner, c->guard_interval); + dev_dbg(&priv->i2c->dev, "%s: delivery_system=%d frequency=%d " \ + "bandwidth_hz=%d modulation=%d inversion=%d " \ + "fec_inner=%d guard_interval=%d\n", __func__, + c->delivery_system, c->frequency, c->bandwidth_hz, + c->modulation, c->inversion, c->fec_inner, + c->guard_interval); /* as for now we detect always params automatically */ auto_mode = true; @@ -394,7 +395,8 @@ static enum dvbfe_search hd29l2_search(struct dvb_frontend *fe) if (ret) goto err; - dbg("%s: if_freq=%d if_ctl=%x", __func__, if_freq, if_ctl); + dev_dbg(&priv->i2c->dev, "%s: if_freq=%d if_ctl=%x\n", + __func__, if_freq, if_ctl); if (auto_mode) { /* @@ -437,7 +439,7 @@ static enum dvbfe_search hd29l2_search(struct dvb_frontend *fe) break; } - dbg("%s: loop=%d", __func__, i); + dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); if (i == 0) /* detection failed */ @@ -477,7 +479,8 @@ static enum dvbfe_search hd29l2_search(struct dvb_frontend *fe) /* ensure modulation validy */ /* 0=QAM4_NR, 1=QAM4, 2=QAM16, 3=QAM32, 4=QAM64 */ if (modulation > (ARRAY_SIZE(reg_mod_vals_tab[0].val) - 1)) { - dbg("%s: modulation=%d not valid", __func__, modulation); + dev_dbg(&priv->i2c->dev, "%s: modulation=%d not valid\n", + __func__, modulation); goto err; } @@ -499,12 +502,14 @@ static enum dvbfe_search hd29l2_search(struct dvb_frontend *fe) if (ret) goto err; - dbg("%s: modulation=%d guard_interval=%d carrier=%d", - __func__, modulation, guard_interval, carrier); + dev_dbg(&priv->i2c->dev, + "%s: modulation=%d guard_interval=%d carrier=%d\n", + __func__, modulation, guard_interval, carrier); if ((carrier == HD29L2_CARRIER_MULTI) && (modulation == HD29L2_QAM64) && (guard_interval == HD29L2_PN945)) { - dbg("%s: C=3780 && QAM64 && PN945", __func__); + dev_dbg(&priv->i2c->dev, "%s: C=3780 && QAM64 && PN945\n", + __func__); ret = hd29l2_wr_reg(priv, 0x42, 0x33); if (ret) @@ -535,14 +540,14 @@ static enum dvbfe_search hd29l2_search(struct dvb_frontend *fe) break; } - dbg("%s: loop=%d", __func__, i); + dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i); if (i == 0) return DVBFE_ALGO_SEARCH_AGAIN; return DVBFE_ALGO_SEARCH_SUCCESS; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return DVBFE_ALGO_SEARCH_ERROR; } @@ -704,14 +709,14 @@ static int hd29l2_get_frontend(struct dvb_frontend *fe) if_ctl = (buf[0] << 16) | ((buf[1] - 7) << 8) | buf[2]; - dbg("%s: %s %s %s | %s %s %s | %s %s | NCO=%06x", __func__, - str_constellation, str_code_rate, str_constellation_code_rate, - str_guard_interval, str_carrier, str_guard_interval_carrier, - str_interleave, str_interleave_, if_ctl); - + dev_dbg(&priv->i2c->dev, "%s: %s %s %s | %s %s %s | %s %s | NCO=%06x\n", + __func__, str_constellation, str_code_rate, + str_constellation_code_rate, str_guard_interval, + str_carrier, str_guard_interval_carrier, str_interleave, + str_interleave_, if_ctl); return 0; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -730,7 +735,7 @@ static int hd29l2_init(struct dvb_frontend *fe) { 0x10, 0x38 }, }; - dbg("%s:", __func__); + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); /* reset demod */ /* it is recommended to HW reset chip using RST_N pin */ @@ -774,7 +779,7 @@ static int hd29l2_init(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } diff --git a/drivers/media/dvb/frontends/hd29l2.h b/drivers/media/dvb-frontends/hd29l2.h similarity index 96% rename from drivers/media/dvb/frontends/hd29l2.h rename to drivers/media/dvb-frontends/hd29l2.h index a7a64431364d35d734a1c5c88387fa27636a00df..4ad00d79aa77350cb10d9d9e2258c2415cc0bbfe 100644 --- a/drivers/media/dvb/frontends/hd29l2.h +++ b/drivers/media/dvb-frontends/hd29l2.h @@ -58,7 +58,7 @@ extern struct dvb_frontend *hd29l2_attach(const struct hd29l2_config *config, static inline struct dvb_frontend *hd29l2_attach( const struct hd29l2_config *config, struct i2c_adapter *i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + pr_warn("%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif diff --git a/drivers/media/dvb/frontends/hd29l2_priv.h b/drivers/media/dvb-frontends/hd29l2_priv.h similarity index 96% rename from drivers/media/dvb/frontends/hd29l2_priv.h rename to drivers/media/dvb-frontends/hd29l2_priv.h index ba16dc3ec2bdf04143cb1bb24608bb1a4ee9b380..4d571a2282d4177a074d45f5269e8f4bcd194581 100644 --- a/drivers/media/dvb/frontends/hd29l2_priv.h +++ b/drivers/media/dvb-frontends/hd29l2_priv.h @@ -28,19 +28,6 @@ #include "dvb_math.h" #include "hd29l2.h" -#define LOG_PREFIX "hd29l2" - -#undef dbg -#define dbg(f, arg...) \ - if (hd29l2_debug) \ - printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) -#undef err -#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) -#undef info -#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) -#undef warn -#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg) - #define HD29L2_XTAL 30400000 /* Hz */ diff --git a/drivers/media/dvb/frontends/isl6405.c b/drivers/media/dvb-frontends/isl6405.c similarity index 100% rename from drivers/media/dvb/frontends/isl6405.c rename to drivers/media/dvb-frontends/isl6405.c diff --git a/drivers/media/dvb/frontends/isl6405.h b/drivers/media/dvb-frontends/isl6405.h similarity index 100% rename from drivers/media/dvb/frontends/isl6405.h rename to drivers/media/dvb-frontends/isl6405.h diff --git a/drivers/media/dvb/frontends/isl6421.c b/drivers/media/dvb-frontends/isl6421.c similarity index 100% rename from drivers/media/dvb/frontends/isl6421.c rename to drivers/media/dvb-frontends/isl6421.c diff --git a/drivers/media/dvb/frontends/isl6421.h b/drivers/media/dvb-frontends/isl6421.h similarity index 100% rename from drivers/media/dvb/frontends/isl6421.h rename to drivers/media/dvb-frontends/isl6421.h diff --git a/drivers/media/dvb/frontends/isl6423.c b/drivers/media/dvb-frontends/isl6423.c similarity index 100% rename from drivers/media/dvb/frontends/isl6423.c rename to drivers/media/dvb-frontends/isl6423.c diff --git a/drivers/media/dvb/frontends/isl6423.h b/drivers/media/dvb-frontends/isl6423.h similarity index 100% rename from drivers/media/dvb/frontends/isl6423.h rename to drivers/media/dvb-frontends/isl6423.h diff --git a/drivers/media/dvb/frontends/it913x-fe-priv.h b/drivers/media/dvb-frontends/it913x-fe-priv.h similarity index 100% rename from drivers/media/dvb/frontends/it913x-fe-priv.h rename to drivers/media/dvb-frontends/it913x-fe-priv.h diff --git a/drivers/media/dvb/frontends/it913x-fe.c b/drivers/media/dvb-frontends/it913x-fe.c similarity index 99% rename from drivers/media/dvb/frontends/it913x-fe.c rename to drivers/media/dvb-frontends/it913x-fe.c index 708cbf197913669d84eafe50e0f18fcee2f6ef4e..6e1c6eb340b7ead632f4629cee4a60999c2ccf3c 100644 --- a/drivers/media/dvb/frontends/it913x-fe.c +++ b/drivers/media/dvb-frontends/it913x-fe.c @@ -199,7 +199,7 @@ static int it913x_init_tuner(struct it913x_fe_state *state) if (reg < 0) return -ENODEV; - else if (reg < sizeof(nv)) + else if (reg < ARRAY_SIZE(nv)) nv_val = nv[reg]; else nv_val = 2; diff --git a/drivers/media/dvb/frontends/it913x-fe.h b/drivers/media/dvb-frontends/it913x-fe.h similarity index 100% rename from drivers/media/dvb/frontends/it913x-fe.h rename to drivers/media/dvb-frontends/it913x-fe.h diff --git a/drivers/media/dvb/frontends/itd1000.c b/drivers/media/dvb-frontends/itd1000.c similarity index 100% rename from drivers/media/dvb/frontends/itd1000.c rename to drivers/media/dvb-frontends/itd1000.c diff --git a/drivers/media/dvb/frontends/itd1000.h b/drivers/media/dvb-frontends/itd1000.h similarity index 100% rename from drivers/media/dvb/frontends/itd1000.h rename to drivers/media/dvb-frontends/itd1000.h diff --git a/drivers/media/dvb/frontends/itd1000_priv.h b/drivers/media/dvb-frontends/itd1000_priv.h similarity index 100% rename from drivers/media/dvb/frontends/itd1000_priv.h rename to drivers/media/dvb-frontends/itd1000_priv.h diff --git a/drivers/media/dvb/frontends/ix2505v.c b/drivers/media/dvb-frontends/ix2505v.c similarity index 100% rename from drivers/media/dvb/frontends/ix2505v.c rename to drivers/media/dvb-frontends/ix2505v.c diff --git a/drivers/media/dvb/frontends/ix2505v.h b/drivers/media/dvb-frontends/ix2505v.h similarity index 100% rename from drivers/media/dvb/frontends/ix2505v.h rename to drivers/media/dvb-frontends/ix2505v.h diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb-frontends/l64781.c similarity index 100% rename from drivers/media/dvb/frontends/l64781.c rename to drivers/media/dvb-frontends/l64781.c diff --git a/drivers/media/dvb/frontends/l64781.h b/drivers/media/dvb-frontends/l64781.h similarity index 100% rename from drivers/media/dvb/frontends/l64781.h rename to drivers/media/dvb-frontends/l64781.h diff --git a/drivers/media/dvb/frontends/lg2160.c b/drivers/media/dvb-frontends/lg2160.c similarity index 100% rename from drivers/media/dvb/frontends/lg2160.c rename to drivers/media/dvb-frontends/lg2160.c diff --git a/drivers/media/dvb/frontends/lg2160.h b/drivers/media/dvb-frontends/lg2160.h similarity index 100% rename from drivers/media/dvb/frontends/lg2160.h rename to drivers/media/dvb-frontends/lg2160.h diff --git a/drivers/media/dvb/frontends/lgdt3305.c b/drivers/media/dvb-frontends/lgdt3305.c similarity index 100% rename from drivers/media/dvb/frontends/lgdt3305.c rename to drivers/media/dvb-frontends/lgdt3305.c diff --git a/drivers/media/dvb/frontends/lgdt3305.h b/drivers/media/dvb-frontends/lgdt3305.h similarity index 100% rename from drivers/media/dvb/frontends/lgdt3305.h rename to drivers/media/dvb-frontends/lgdt3305.h diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb-frontends/lgdt330x.c similarity index 100% rename from drivers/media/dvb/frontends/lgdt330x.c rename to drivers/media/dvb-frontends/lgdt330x.c diff --git a/drivers/media/dvb/frontends/lgdt330x.h b/drivers/media/dvb-frontends/lgdt330x.h similarity index 100% rename from drivers/media/dvb/frontends/lgdt330x.h rename to drivers/media/dvb-frontends/lgdt330x.h diff --git a/drivers/media/dvb/frontends/lgdt330x_priv.h b/drivers/media/dvb-frontends/lgdt330x_priv.h similarity index 100% rename from drivers/media/dvb/frontends/lgdt330x_priv.h rename to drivers/media/dvb-frontends/lgdt330x_priv.h diff --git a/drivers/media/dvb/frontends/lgs8gl5.c b/drivers/media/dvb-frontends/lgs8gl5.c similarity index 99% rename from drivers/media/dvb/frontends/lgs8gl5.c rename to drivers/media/dvb-frontends/lgs8gl5.c index 2cec8041a1068e7f0d7f6cef5a365d68434cfbed..416cce3fefc7166777246d3ebd278eca720e9f7a 100644 --- a/drivers/media/dvb/frontends/lgs8gl5.c +++ b/drivers/media/dvb-frontends/lgs8gl5.c @@ -412,7 +412,7 @@ EXPORT_SYMBOL(lgs8gl5_attach); static struct dvb_frontend_ops lgs8gl5_ops = { - .delsys = { SYS_DMBTH }, + .delsys = { SYS_DTMB }, .info = { .name = "Legend Silicon LGS-8GL5 DMB-TH", .frequency_min = 474000000, diff --git a/drivers/media/dvb/frontends/lgs8gl5.h b/drivers/media/dvb-frontends/lgs8gl5.h similarity index 100% rename from drivers/media/dvb/frontends/lgs8gl5.h rename to drivers/media/dvb-frontends/lgs8gl5.h diff --git a/drivers/media/dvb/frontends/lgs8gxx.c b/drivers/media/dvb-frontends/lgs8gxx.c similarity index 99% rename from drivers/media/dvb/frontends/lgs8gxx.c rename to drivers/media/dvb-frontends/lgs8gxx.c index c2ea2749ebedd40c0466a96ec33f90bfebcbee13..3c92f36ea5c7a287261eba1d34f5bff7c7eb0b47 100644 --- a/drivers/media/dvb/frontends/lgs8gxx.c +++ b/drivers/media/dvb-frontends/lgs8gxx.c @@ -995,7 +995,7 @@ static int lgs8gxx_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) } static struct dvb_frontend_ops lgs8gxx_ops = { - .delsys = { SYS_DMBTH }, + .delsys = { SYS_DTMB }, .info = { .name = "Legend Silicon LGS8913/LGS8GXX DMB-TH", .frequency_min = 474000000, diff --git a/drivers/media/dvb/frontends/lgs8gxx.h b/drivers/media/dvb-frontends/lgs8gxx.h similarity index 100% rename from drivers/media/dvb/frontends/lgs8gxx.h rename to drivers/media/dvb-frontends/lgs8gxx.h diff --git a/drivers/media/dvb/frontends/lgs8gxx_priv.h b/drivers/media/dvb-frontends/lgs8gxx_priv.h similarity index 100% rename from drivers/media/dvb/frontends/lgs8gxx_priv.h rename to drivers/media/dvb-frontends/lgs8gxx_priv.h diff --git a/drivers/media/dvb/frontends/lnbh24.h b/drivers/media/dvb-frontends/lnbh24.h similarity index 100% rename from drivers/media/dvb/frontends/lnbh24.h rename to drivers/media/dvb-frontends/lnbh24.h diff --git a/drivers/media/dvb/frontends/lnbp21.c b/drivers/media/dvb-frontends/lnbp21.c similarity index 100% rename from drivers/media/dvb/frontends/lnbp21.c rename to drivers/media/dvb-frontends/lnbp21.c diff --git a/drivers/media/dvb/frontends/lnbp21.h b/drivers/media/dvb-frontends/lnbp21.h similarity index 100% rename from drivers/media/dvb/frontends/lnbp21.h rename to drivers/media/dvb-frontends/lnbp21.h diff --git a/drivers/media/dvb/frontends/lnbp22.c b/drivers/media/dvb-frontends/lnbp22.c similarity index 100% rename from drivers/media/dvb/frontends/lnbp22.c rename to drivers/media/dvb-frontends/lnbp22.c diff --git a/drivers/media/dvb/frontends/lnbp22.h b/drivers/media/dvb-frontends/lnbp22.h similarity index 100% rename from drivers/media/dvb/frontends/lnbp22.h rename to drivers/media/dvb-frontends/lnbp22.h diff --git a/drivers/media/dvb/frontends/m88rs2000.c b/drivers/media/dvb-frontends/m88rs2000.c similarity index 99% rename from drivers/media/dvb/frontends/m88rs2000.c rename to drivers/media/dvb-frontends/m88rs2000.c index 312588e84daeedf855ccc266b8484dbc13706ee0..633815ed90ca7262641185cdd17b2224079a3316 100644 --- a/drivers/media/dvb/frontends/m88rs2000.c +++ b/drivers/media/dvb-frontends/m88rs2000.c @@ -481,7 +481,7 @@ static int m88rs2000_read_status(struct dvb_frontend *fe, fe_status_t *status) if ((reg & 0x7) == 0x7) { *status = FE_HAS_CARRIER | FE_HAS_SIGNAL | FE_HAS_VITERBI - | FE_HAS_LOCK; + | FE_HAS_SYNC | FE_HAS_LOCK; if (state->config->set_ts_params) state->config->set_ts_params(fe, CALL_IS_READ); } diff --git a/drivers/media/dvb/frontends/m88rs2000.h b/drivers/media/dvb-frontends/m88rs2000.h similarity index 100% rename from drivers/media/dvb/frontends/m88rs2000.h rename to drivers/media/dvb-frontends/m88rs2000.h diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb-frontends/mb86a16.c similarity index 100% rename from drivers/media/dvb/frontends/mb86a16.c rename to drivers/media/dvb-frontends/mb86a16.c diff --git a/drivers/media/dvb/frontends/mb86a16.h b/drivers/media/dvb-frontends/mb86a16.h similarity index 100% rename from drivers/media/dvb/frontends/mb86a16.h rename to drivers/media/dvb-frontends/mb86a16.h diff --git a/drivers/media/dvb/frontends/mb86a16_priv.h b/drivers/media/dvb-frontends/mb86a16_priv.h similarity index 100% rename from drivers/media/dvb/frontends/mb86a16_priv.h rename to drivers/media/dvb-frontends/mb86a16_priv.h diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb-frontends/mb86a20s.c similarity index 100% rename from drivers/media/dvb/frontends/mb86a20s.c rename to drivers/media/dvb-frontends/mb86a20s.c diff --git a/drivers/media/dvb/frontends/mb86a20s.h b/drivers/media/dvb-frontends/mb86a20s.h similarity index 100% rename from drivers/media/dvb/frontends/mb86a20s.h rename to drivers/media/dvb-frontends/mb86a20s.h diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb-frontends/mt312.c similarity index 100% rename from drivers/media/dvb/frontends/mt312.c rename to drivers/media/dvb-frontends/mt312.c diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb-frontends/mt312.h similarity index 100% rename from drivers/media/dvb/frontends/mt312.h rename to drivers/media/dvb-frontends/mt312.h diff --git a/drivers/media/dvb/frontends/mt312_priv.h b/drivers/media/dvb-frontends/mt312_priv.h similarity index 100% rename from drivers/media/dvb/frontends/mt312_priv.h rename to drivers/media/dvb-frontends/mt312_priv.h diff --git a/drivers/media/dvb/frontends/mt352.c b/drivers/media/dvb-frontends/mt352.c similarity index 100% rename from drivers/media/dvb/frontends/mt352.c rename to drivers/media/dvb-frontends/mt352.c diff --git a/drivers/media/dvb/frontends/mt352.h b/drivers/media/dvb-frontends/mt352.h similarity index 100% rename from drivers/media/dvb/frontends/mt352.h rename to drivers/media/dvb-frontends/mt352.h diff --git a/drivers/media/dvb/frontends/mt352_priv.h b/drivers/media/dvb-frontends/mt352_priv.h similarity index 100% rename from drivers/media/dvb/frontends/mt352_priv.h rename to drivers/media/dvb-frontends/mt352_priv.h diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb-frontends/nxt200x.c similarity index 93% rename from drivers/media/dvb/frontends/nxt200x.c rename to drivers/media/dvb-frontends/nxt200x.c index 49ca78d883b18031ec110a6329be86bf49c9acbe..8e288940a61fcb0654034dde41457de506e25a8f 100644 --- a/drivers/media/dvb/frontends/nxt200x.c +++ b/drivers/media/dvb-frontends/nxt200x.c @@ -37,6 +37,8 @@ * /usr/lib/hotplug/firmware/ or /lib/firmware/ * (depending on configuration of firmware hotplug). */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw" #define NXT2004_DEFAULT_FIRMWARE "dvb-fe-nxt2004.fw" #define CRC_CCIT_MASK 0x1021 @@ -62,10 +64,7 @@ struct nxt200x_state { }; static int debug; -#define dprintk(args...) \ - do { \ - if (debug) printk(KERN_DEBUG "nxt200x: " args); \ - } while (0) +#define dprintk(args...) do { if (debug) pr_debug(args); } while (0) static int i2c_writebytes (struct nxt200x_state* state, u8 addr, u8 *buf, u8 len) { @@ -73,7 +72,7 @@ static int i2c_writebytes (struct nxt200x_state* state, u8 addr, u8 *buf, u8 len struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = len }; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - printk (KERN_WARNING "nxt200x: %s: i2c write error (addr 0x%02x, err == %i)\n", + pr_warn("%s: i2c write error (addr 0x%02x, err == %i)\n", __func__, addr, err); return -EREMOTEIO; } @@ -86,7 +85,7 @@ static int i2c_readbytes(struct nxt200x_state *state, u8 addr, u8 *buf, u8 len) struct i2c_msg msg = { .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len }; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - printk (KERN_WARNING "nxt200x: %s: i2c read error (addr 0x%02x, err == %i)\n", + pr_warn("%s: i2c read error (addr 0x%02x, err == %i)\n", __func__, addr, err); return -EREMOTEIO; } @@ -104,7 +103,7 @@ static int nxt200x_writebytes (struct nxt200x_state* state, u8 reg, memcpy(&buf2[1], buf, len); if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - printk (KERN_WARNING "nxt200x: %s: i2c write error (addr 0x%02x, err == %i)\n", + pr_warn("%s: i2c write error (addr 0x%02x, err == %i)\n", __func__, state->config->demod_address, err); return -EREMOTEIO; } @@ -121,7 +120,7 @@ static int nxt200x_readbytes(struct nxt200x_state *state, u8 reg, u8 *buf, u8 le int err; if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) { - printk (KERN_WARNING "nxt200x: %s: i2c read error (addr 0x%02x, err == %i)\n", + pr_warn("%s: i2c read error (addr 0x%02x, err == %i)\n", __func__, state->config->demod_address, err); return -EREMOTEIO; } @@ -199,7 +198,7 @@ static int nxt200x_writereg_multibyte (struct nxt200x_state* state, u8 reg, u8* break; } - printk(KERN_WARNING "nxt200x: Error writing multireg register 0x%02X\n",reg); + pr_warn("Error writing multireg register 0x%02X\n", reg); return 0; } @@ -281,7 +280,8 @@ static void nxt200x_microcontroller_stop (struct nxt200x_state* state) counter++; } - printk(KERN_WARNING "nxt200x: Timeout waiting for nxt200x to stop. This is ok after firmware upload.\n"); + pr_warn("Timeout waiting for nxt200x to stop. This is ok after " + "firmware upload.\n"); return; } @@ -320,7 +320,7 @@ static void nxt2004_microcontroller_init (struct nxt200x_state* state) counter++; } - printk(KERN_WARNING "nxt200x: Timeout waiting for nxt2004 to init.\n"); + pr_warn("Timeout waiting for nxt2004 to init.\n"); return; } @@ -331,14 +331,14 @@ static int nxt200x_writetuner (struct nxt200x_state* state, u8* data) dprintk("%s\n", __func__); - dprintk("Tuner Bytes: %02X %02X %02X %02X\n", data[1], data[2], data[3], data[4]); + dprintk("Tuner Bytes: %*ph\n", 4, data + 1); /* if NXT2004, write directly to tuner. if NXT2002, write through NXT chip. * direct write is required for Philips TUV1236D and ALPS TDHU2 */ switch (state->demod_chip) { case NXT2004: if (i2c_writebytes(state, data[0], data+1, 4)) - printk(KERN_WARNING "nxt200x: error writing to tuner\n"); + pr_warn("error writing to tuner\n"); /* wait until we have a lock */ while (count < 20) { i2c_readbytes(state, data[0], &buf, 1); @@ -347,7 +347,7 @@ static int nxt200x_writetuner (struct nxt200x_state* state, u8* data) msleep(100); count++; } - printk("nxt2004: timeout waiting for tuner lock\n"); + pr_warn("timeout waiting for tuner lock\n"); break; case NXT2002: /* set the i2c transfer speed to the tuner */ @@ -376,7 +376,7 @@ static int nxt200x_writetuner (struct nxt200x_state* state, u8* data) msleep(100); count++; } - printk("nxt2002: timeout error writing tuner\n"); + pr_warn("timeout error writing to tuner\n"); break; default: return -EINVAL; @@ -878,22 +878,24 @@ static int nxt2002_init(struct dvb_frontend* fe) u8 buf[2]; /* request the firmware, this will block until someone uploads it */ - printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE); + pr_debug("%s: Waiting for firmware upload (%s)...\n", + __func__, NXT2002_DEFAULT_FIRMWARE); ret = request_firmware(&fw, NXT2002_DEFAULT_FIRMWARE, state->i2c->dev.parent); - printk("nxt2002: Waiting for firmware upload(2)...\n"); + pr_debug("%s: Waiting for firmware upload(2)...\n", __func__); if (ret) { - printk("nxt2002: No firmware uploaded (timeout or file not found?)\n"); + pr_err("%s: No firmware uploaded (timeout or file not found?)" + "\n", __func__); return ret; } ret = nxt2002_load_firmware(fe, fw); release_firmware(fw); if (ret) { - printk("nxt2002: Writing firmware to device failed\n"); + pr_err("%s: Writing firmware to device failed\n", __func__); return ret; } - printk("nxt2002: Firmware upload complete\n"); + pr_info("%s: Firmware upload complete\n", __func__); /* Put the micro into reset */ nxt200x_microcontroller_stop(state); @@ -943,22 +945,24 @@ static int nxt2004_init(struct dvb_frontend* fe) nxt200x_writebytes(state, 0x1E, buf, 1); /* request the firmware, this will block until someone uploads it */ - printk("nxt2004: Waiting for firmware upload (%s)...\n", NXT2004_DEFAULT_FIRMWARE); + pr_debug("%s: Waiting for firmware upload (%s)...\n", + __func__, NXT2004_DEFAULT_FIRMWARE); ret = request_firmware(&fw, NXT2004_DEFAULT_FIRMWARE, state->i2c->dev.parent); - printk("nxt2004: Waiting for firmware upload(2)...\n"); + pr_debug("%s: Waiting for firmware upload(2)...\n", __func__); if (ret) { - printk("nxt2004: No firmware uploaded (timeout or file not found?)\n"); + pr_err("%s: No firmware uploaded (timeout or file not found?)" + "\n", __func__); return ret; } ret = nxt2004_load_firmware(fe, fw); release_firmware(fw); if (ret) { - printk("nxt2004: Writing firmware to device failed\n"); + pr_err("%s: Writing firmware to device failed\n", __func__); return ret; } - printk("nxt2004: Firmware upload complete\n"); + pr_info("%s: Firmware upload complete\n", __func__); /* ensure transfer is complete */ buf[0] = 0x01; @@ -1157,18 +1161,17 @@ struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config, /* read card id */ nxt200x_readbytes(state, 0x00, buf, 5); - dprintk("NXT info: %02X %02X %02X %02X %02X\n", - buf[0], buf[1], buf[2], buf[3], buf[4]); + dprintk("NXT info: %*ph\n", 5, buf); /* set demod chip */ switch (buf[0]) { case 0x04: state->demod_chip = NXT2002; - printk("nxt200x: NXT2002 Detected\n"); + pr_info("NXT2002 Detected\n"); break; case 0x05: state->demod_chip = NXT2004; - printk("nxt200x: NXT2004 Detected\n"); + pr_info("NXT2004 Detected\n"); break; default: goto error; @@ -1197,8 +1200,7 @@ struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config, error: kfree(state); - printk("Unknown/Unsupported NXT chip: %02X %02X %02X %02X %02X\n", - buf[0], buf[1], buf[2], buf[3], buf[4]); + pr_err("Unknown/Unsupported NXT chip: %*ph\n", 5, buf); return NULL; } diff --git a/drivers/media/dvb/frontends/nxt200x.h b/drivers/media/dvb-frontends/nxt200x.h similarity index 100% rename from drivers/media/dvb/frontends/nxt200x.h rename to drivers/media/dvb-frontends/nxt200x.h diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb-frontends/nxt6000.c similarity index 100% rename from drivers/media/dvb/frontends/nxt6000.c rename to drivers/media/dvb-frontends/nxt6000.c diff --git a/drivers/media/dvb/frontends/nxt6000.h b/drivers/media/dvb-frontends/nxt6000.h similarity index 100% rename from drivers/media/dvb/frontends/nxt6000.h rename to drivers/media/dvb-frontends/nxt6000.h diff --git a/drivers/media/dvb/frontends/nxt6000_priv.h b/drivers/media/dvb-frontends/nxt6000_priv.h similarity index 100% rename from drivers/media/dvb/frontends/nxt6000_priv.h rename to drivers/media/dvb-frontends/nxt6000_priv.h diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb-frontends/or51132.c similarity index 100% rename from drivers/media/dvb/frontends/or51132.c rename to drivers/media/dvb-frontends/or51132.c diff --git a/drivers/media/dvb/frontends/or51132.h b/drivers/media/dvb-frontends/or51132.h similarity index 100% rename from drivers/media/dvb/frontends/or51132.h rename to drivers/media/dvb-frontends/or51132.h diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c similarity index 100% rename from drivers/media/dvb/frontends/or51211.c rename to drivers/media/dvb-frontends/or51211.c diff --git a/drivers/media/dvb/frontends/or51211.h b/drivers/media/dvb-frontends/or51211.h similarity index 100% rename from drivers/media/dvb/frontends/or51211.h rename to drivers/media/dvb-frontends/or51211.h diff --git a/drivers/media/dvb/frontends/rtl2830.c b/drivers/media/dvb-frontends/rtl2830.c similarity index 88% rename from drivers/media/dvb/frontends/rtl2830.c rename to drivers/media/dvb-frontends/rtl2830.c index 93612ebac519d86cdf8efdf257021ba986dceefd..b0f6ec03d1eb0e4b1e10444e63b482ca945d5a6c 100644 --- a/drivers/media/dvb/frontends/rtl2830.c +++ b/drivers/media/dvb-frontends/rtl2830.c @@ -27,12 +27,8 @@ #include "rtl2830_priv.h" -int rtl2830_debug; -module_param_named(debug, rtl2830_debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); - /* write multiple hardware registers */ -static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, u8 *val, int len) +static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, const u8 *val, int len) { int ret; u8 buf[1+len]; @@ -52,7 +48,8 @@ static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, u8 *val, int len) if (ret == 1) { ret = 0; } else { - warn("i2c wr failed=%d reg=%02x len=%d", ret, reg, len); + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } return ret; @@ -80,14 +77,16 @@ static int rtl2830_rd(struct rtl2830_priv *priv, u8 reg, u8 *val, int len) if (ret == 2) { ret = 0; } else { - warn("i2c rd failed=%d reg=%02x len=%d", ret, reg, len); + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } return ret; } /* write multiple registers */ -static int rtl2830_wr_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len) +static int rtl2830_wr_regs(struct rtl2830_priv *priv, u16 reg, const u8 *val, + int len) { int ret; u8 reg2 = (reg >> 0) & 0xff; @@ -124,14 +123,6 @@ static int rtl2830_rd_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len) return rtl2830_rd(priv, reg2, val, len); } -#if 0 /* currently not used */ -/* write single register */ -static int rtl2830_wr_reg(struct rtl2830_priv *priv, u16 reg, u8 val) -{ - return rtl2830_wr_regs(priv, reg, &val, 1); -} -#endif - /* read single register */ static int rtl2830_rd_reg(struct rtl2830_priv *priv, u16 reg, u8 *val) { @@ -184,9 +175,6 @@ static int rtl2830_init(struct dvb_frontend *fe) { struct rtl2830_priv *priv = fe->demodulator_priv; int ret, i; - u64 num; - u8 buf[3], tmp; - u32 if_ctl; struct rtl2830_reg_val_mask tab[] = { { 0x00d, 0x01, 0x03 }, { 0x00d, 0x10, 0x10 }, @@ -242,26 +230,6 @@ static int rtl2830_init(struct dvb_frontend *fe) if (ret) goto err; - num = priv->cfg.if_dvbt % priv->cfg.xtal; - num *= 0x400000; - num = div_u64(num, priv->cfg.xtal); - num = -num; - if_ctl = num & 0x3fffff; - dbg("%s: if_ctl=%08x", __func__, if_ctl); - - ret = rtl2830_rd_reg_mask(priv, 0x119, &tmp, 0xc0); /* b[7:6] */ - if (ret) - goto err; - - buf[0] = tmp << 6; - buf[0] = (if_ctl >> 16) & 0x3f; - buf[1] = (if_ctl >> 8) & 0xff; - buf[2] = (if_ctl >> 0) & 0xff; - - ret = rtl2830_wr_regs(priv, 0x119, buf, 3); - if (ret) - goto err; - /* TODO: spec init */ /* soft reset */ @@ -277,7 +245,7 @@ static int rtl2830_init(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -303,7 +271,10 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe) struct rtl2830_priv *priv = fe->demodulator_priv; struct dtv_frontend_properties *c = &fe->dtv_property_cache; int ret, i; - static u8 bw_params1[3][34] = { + u64 num; + u8 buf[3], tmp; + u32 if_ctl, if_frequency; + static const u8 bw_params1[3][34] = { { 0x1f, 0xf0, 0x1f, 0xf0, 0x1f, 0xfa, 0x00, 0x17, 0x00, 0x41, 0x00, 0x64, 0x00, 0x67, 0x00, 0x38, 0x1f, 0xde, 0x1f, 0x7a, @@ -321,15 +292,15 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe) 0x04, 0x24, 0x04, 0xdb, /* 8 MHz */ }, }; - static u8 bw_params2[3][6] = { - {0xc3, 0x0c, 0x44, 0x33, 0x33, 0x30,}, /* 6 MHz */ - {0xb8, 0xe3, 0x93, 0x99, 0x99, 0x98,}, /* 7 MHz */ - {0xae, 0xba, 0xf3, 0x26, 0x66, 0x64,}, /* 8 MHz */ + static const u8 bw_params2[3][6] = { + {0xc3, 0x0c, 0x44, 0x33, 0x33, 0x30}, /* 6 MHz */ + {0xb8, 0xe3, 0x93, 0x99, 0x99, 0x98}, /* 7 MHz */ + {0xae, 0xba, 0xf3, 0x26, 0x66, 0x64}, /* 8 MHz */ }; - - dbg("%s: frequency=%d bandwidth_hz=%d inversion=%d", __func__, - c->frequency, c->bandwidth_hz, c->inversion); + dev_dbg(&priv->i2c->dev, + "%s: frequency=%d bandwidth_hz=%d inversion=%d\n", + __func__, c->frequency, c->bandwidth_hz, c->inversion); /* program tuner */ if (fe->ops.tuner_ops.set_params) @@ -346,7 +317,7 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe) i = 2; break; default: - dbg("invalid bandwidth"); + dev_dbg(&priv->i2c->dev, "%s: invalid bandwidth\n", __func__); return -EINVAL; } @@ -354,6 +325,36 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe) if (ret) goto err; + /* program if frequency */ + if (fe->ops.tuner_ops.get_if_frequency) + ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency); + else + ret = -EINVAL; + + if (ret < 0) + goto err; + + num = if_frequency % priv->cfg.xtal; + num *= 0x400000; + num = div_u64(num, priv->cfg.xtal); + num = -num; + if_ctl = num & 0x3fffff; + dev_dbg(&priv->i2c->dev, "%s: if_frequency=%d if_ctl=%08x\n", + __func__, if_frequency, if_ctl); + + ret = rtl2830_rd_reg_mask(priv, 0x119, &tmp, 0xc0); /* b[7:6] */ + if (ret) + goto err; + + buf[0] = tmp << 6; + buf[0] |= (if_ctl >> 16) & 0x3f; + buf[1] = (if_ctl >> 8) & 0xff; + buf[2] = (if_ctl >> 0) & 0xff; + + ret = rtl2830_wr_regs(priv, 0x119, buf, 3); + if (ret) + goto err; + /* 1/2 split I2C write */ ret = rtl2830_wr_regs(priv, 0x11c, &bw_params1[i][0], 17); if (ret) @@ -370,7 +371,7 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -392,7 +393,7 @@ static int rtl2830_get_frontend(struct dvb_frontend *fe) if (ret) goto err; - dbg("%s: TPS=%02x %02x %02x", __func__, buf[0], buf[1], buf[2]); + dev_dbg(&priv->i2c->dev, "%s: TPS=%*ph\n", __func__, 3, buf); switch ((buf[0] >> 2) & 3) { case 0: @@ -482,7 +483,7 @@ static int rtl2830_get_frontend(struct dvb_frontend *fe) return 0; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -510,7 +511,7 @@ static int rtl2830_read_status(struct dvb_frontend *fe, fe_status_t *status) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -559,7 +560,7 @@ static int rtl2830_read_snr(struct dvb_frontend *fe, u16 *snr) return 0; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -580,7 +581,7 @@ static int rtl2830_read_ber(struct dvb_frontend *fe, u32 *ber) return 0; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -616,7 +617,7 @@ static int rtl2830_read_signal_strength(struct dvb_frontend *fe, u16 *strength) return 0; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -640,11 +641,12 @@ static int rtl2830_tuner_i2c_xfer(struct i2c_adapter *i2c_adap, ret = i2c_transfer(priv->i2c, msg, num); if (ret < 0) - warn("tuner i2c failed=%d", ret); + dev_warn(&priv->i2c->dev, "%s: tuner i2c failed=%d\n", + KBUILD_MODNAME, ret); return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -700,7 +702,9 @@ struct dvb_frontend *rtl2830_attach(const struct rtl2830_config *cfg, priv->tuner_i2c_adapter.algo_data = NULL; i2c_set_adapdata(&priv->tuner_i2c_adapter, priv); if (i2c_add_adapter(&priv->tuner_i2c_adapter) < 0) { - err("tuner I2C bus could not be initialized"); + dev_err(&i2c->dev, + "%s: tuner i2c bus could not be initialized\n", + KBUILD_MODNAME); goto err; } @@ -708,7 +712,7 @@ struct dvb_frontend *rtl2830_attach(const struct rtl2830_config *cfg, return &priv->fe; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); kfree(priv); return NULL; } diff --git a/drivers/media/dvb/frontends/rtl2830.h b/drivers/media/dvb-frontends/rtl2830.h similarity index 90% rename from drivers/media/dvb/frontends/rtl2830.h rename to drivers/media/dvb-frontends/rtl2830.h index 1c6ee91749c252403ea39bb8f2fe7b21a03a7f32..f4349a1fc03e3879f8085159f4f31178164148bd 100644 --- a/drivers/media/dvb/frontends/rtl2830.h +++ b/drivers/media/dvb-frontends/rtl2830.h @@ -46,13 +46,6 @@ struct rtl2830_config { */ bool spec_inv; - /* - * IFs for all used modes. - * Hz - * 4570000, 4571429, 36000000, 36125000, 36166667, 44000000 - */ - u32 if_dvbt; - /* */ u8 vtop; @@ -82,7 +75,7 @@ static inline struct dvb_frontend *rtl2830_attach( struct i2c_adapter *i2c ) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + pr_warn("%s: driver disabled by Kconfig\n", __func__); return NULL; } diff --git a/drivers/media/dvb/frontends/rtl2830_priv.h b/drivers/media/dvb-frontends/rtl2830_priv.h similarity index 75% rename from drivers/media/dvb/frontends/rtl2830_priv.h rename to drivers/media/dvb-frontends/rtl2830_priv.h index 9b20557ccf6cde4410bd876ff4e8ad70667a5061..fab10ecb3c3b18f6e3bb1f5a249f2a686fbf021c 100644 --- a/drivers/media/dvb/frontends/rtl2830_priv.h +++ b/drivers/media/dvb-frontends/rtl2830_priv.h @@ -25,19 +25,6 @@ #include "dvb_math.h" #include "rtl2830.h" -#define LOG_PREFIX "rtl2830" - -#undef dbg -#define dbg(f, arg...) \ - if (rtl2830_debug) \ - printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) -#undef err -#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) -#undef info -#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) -#undef warn -#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg) - struct rtl2830_priv { struct i2c_adapter *i2c; struct dvb_frontend fe; diff --git a/drivers/media/dvb/frontends/rtl2832.c b/drivers/media/dvb-frontends/rtl2832.c similarity index 77% rename from drivers/media/dvb/frontends/rtl2832.c rename to drivers/media/dvb-frontends/rtl2832.c index 28269ccaeab709a95ce5a02ab345f1a86f6ec305..80c8e5f1182fdc377a7e6ac83ff3e2efc8e523c8 100644 --- a/drivers/media/dvb/frontends/rtl2832.c +++ b/drivers/media/dvb-frontends/rtl2832.c @@ -19,6 +19,7 @@ */ #include "rtl2832_priv.h" +#include "dvb_math.h" #include int rtl2832_debug; @@ -178,7 +179,8 @@ static int rtl2832_wr(struct rtl2832_priv *priv, u8 reg, u8 *val, int len) if (ret == 1) { ret = 0; } else { - warn("i2c wr failed=%d reg=%02x len=%d", ret, reg, len); + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } return ret; @@ -206,10 +208,11 @@ static int rtl2832_rd(struct rtl2832_priv *priv, u8 reg, u8 *val, int len) if (ret == 2) { ret = 0; } else { - warn("i2c rd failed=%d reg=%02x len=%d", ret, reg, len); + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; -} -return ret; + } + return ret; } /* write multiple registers */ @@ -218,7 +221,6 @@ static int rtl2832_wr_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val, { int ret; - /* switch bank if needed */ if (page != priv->page) { ret = rtl2832_wr(priv, 0x00, &page, 1); @@ -298,7 +300,7 @@ int rtl2832_rd_demod_reg(struct rtl2832_priv *priv, int reg, u32 *val) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -350,18 +352,17 @@ int rtl2832_wr_demod_reg(struct rtl2832_priv *priv, int reg, u32 val) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } - static int rtl2832_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { int ret; struct rtl2832_priv *priv = fe->demodulator_priv; - dbg("%s: enable=%d", __func__, enable); + dev_dbg(&priv->i2c->dev, "%s: enable=%d\n", __func__, enable); /* gate already open or close */ if (priv->i2c_gate_state == enable) @@ -375,19 +376,17 @@ static int rtl2832_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } - - static int rtl2832_init(struct dvb_frontend *fe) { struct rtl2832_priv *priv = fe->demodulator_priv; - int i, ret; - + int i, ret, len; u8 en_bbin; u64 pset_iffreq; + const struct rtl2832_reg_value *init; /* initialization values for the demodulator registers */ struct rtl2832_reg_value rtl2832_initial_regs[] = { @@ -434,40 +433,9 @@ static int rtl2832_init(struct dvb_frontend *fe) {DVBT_TRK_KC_I2, 0x5}, {DVBT_CR_THD_SET2, 0x1}, {DVBT_SPEC_INV, 0x0}, - {DVBT_DAGC_TRG_VAL, 0x5a}, - {DVBT_AGC_TARG_VAL_0, 0x0}, - {DVBT_AGC_TARG_VAL_8_1, 0x5a}, - {DVBT_AAGC_LOOP_GAIN, 0x16}, - {DVBT_LOOP_GAIN2_3_0, 0x6}, - {DVBT_LOOP_GAIN2_4, 0x1}, - {DVBT_LOOP_GAIN3, 0x16}, - {DVBT_VTOP1, 0x35}, - {DVBT_VTOP2, 0x21}, - {DVBT_VTOP3, 0x21}, - {DVBT_KRF1, 0x0}, - {DVBT_KRF2, 0x40}, - {DVBT_KRF3, 0x10}, - {DVBT_KRF4, 0x10}, - {DVBT_IF_AGC_MIN, 0x80}, - {DVBT_IF_AGC_MAX, 0x7f}, - {DVBT_RF_AGC_MIN, 0x80}, - {DVBT_RF_AGC_MAX, 0x7f}, - {DVBT_POLAR_RF_AGC, 0x0}, - {DVBT_POLAR_IF_AGC, 0x0}, - {DVBT_AD7_SETTING, 0xe9bf}, - {DVBT_EN_GI_PGA, 0x0}, - {DVBT_THD_LOCK_UP, 0x0}, - {DVBT_THD_LOCK_DW, 0x0}, - {DVBT_THD_UP1, 0x11}, - {DVBT_THD_DW1, 0xef}, - {DVBT_INTER_CNT_LEN, 0xc}, - {DVBT_GI_PGA_STATE, 0x0}, - {DVBT_EN_AGC_PGA, 0x1}, - {DVBT_IF_AGC_MAN, 0x0}, }; - - dbg("%s", __func__); + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); en_bbin = (priv->cfg.if_dvbt == 0 ? 0x1 : 0x0); @@ -480,8 +448,6 @@ static int rtl2832_init(struct dvb_frontend *fe) pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal); pset_iffreq = pset_iffreq & 0x3fffff; - - for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) { ret = rtl2832_wr_demod_reg(priv, rtl2832_initial_regs[i].reg, rtl2832_initial_regs[i].value); @@ -489,6 +455,34 @@ static int rtl2832_init(struct dvb_frontend *fe) goto err; } + /* load tuner specific settings */ + dev_dbg(&priv->i2c->dev, "%s: load settings for tuner=%02x\n", + __func__, priv->cfg.tuner); + switch (priv->cfg.tuner) { + case RTL2832_TUNER_FC0012: + case RTL2832_TUNER_FC0013: + len = ARRAY_SIZE(rtl2832_tuner_init_fc0012); + init = rtl2832_tuner_init_fc0012; + break; + case RTL2832_TUNER_TUA9001: + len = ARRAY_SIZE(rtl2832_tuner_init_tua9001); + init = rtl2832_tuner_init_tua9001; + break; + case RTL2832_TUNER_E4000: + len = ARRAY_SIZE(rtl2832_tuner_init_e4000); + init = rtl2832_tuner_init_e4000; + break; + default: + ret = -EINVAL; + goto err; + } + + for (i = 0; i < len; i++) { + ret = rtl2832_wr_demod_reg(priv, init[i].reg, init[i].value); + if (ret) + goto err; + } + /* if frequency settings */ ret = rtl2832_wr_demod_reg(priv, DVBT_EN_BBIN, en_bbin); if (ret) @@ -503,7 +497,7 @@ static int rtl2832_init(struct dvb_frontend *fe) return ret; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -511,7 +505,7 @@ static int rtl2832_sleep(struct dvb_frontend *fe) { struct rtl2832_priv *priv = fe->demodulator_priv; - dbg("%s", __func__); + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); priv->sleeping = true; return 0; } @@ -519,7 +513,9 @@ static int rtl2832_sleep(struct dvb_frontend *fe) int rtl2832_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *s) { - dbg("%s", __func__); + struct rtl2832_priv *priv = fe->demodulator_priv; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); s->min_delay_ms = 1000; s->step_size = fe->ops.info.frequency_stepsize * 2; s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; @@ -533,8 +529,6 @@ static int rtl2832_set_frontend(struct dvb_frontend *fe) int ret, i, j; u64 bw_mode, num, num2; u32 resamp_ratio, cfreq_off_ratio; - - static u8 bw_params[3][32] = { /* 6 MHz bandwidth */ { @@ -562,15 +556,14 @@ static int rtl2832_set_frontend(struct dvb_frontend *fe) }; - dbg("%s: frequency=%d bandwidth_hz=%d inversion=%d", __func__, - c->frequency, c->bandwidth_hz, c->inversion); - + dev_dbg(&priv->i2c->dev, "%s: frequency=%d bandwidth_hz=%d " \ + "inversion=%d\n", __func__, c->frequency, + c->bandwidth_hz, c->inversion); /* program tuner */ if (fe->ops.tuner_ops.set_params) fe->ops.tuner_ops.set_params(fe); - switch (c->bandwidth_hz) { case 6000000: i = 0; @@ -585,7 +578,7 @@ static int rtl2832_set_frontend(struct dvb_frontend *fe) bw_mode = 64000000; break; default: - dbg("invalid bandwidth"); + dev_dbg(&priv->i2c->dev, "%s: invalid bandwidth\n", __func__); return -EINVAL; } @@ -632,7 +625,119 @@ static int rtl2832_set_frontend(struct dvb_frontend *fe) return ret; err: - info("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832_get_frontend(struct dvb_frontend *fe) +{ + struct rtl2832_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret; + u8 buf[3]; + + if (priv->sleeping) + return 0; + + ret = rtl2832_rd_regs(priv, 0x3c, 3, buf, 2); + if (ret) + goto err; + + ret = rtl2832_rd_reg(priv, 0x51, 3, &buf[2]); + if (ret) + goto err; + + dev_dbg(&priv->i2c->dev, "%s: TPS=%*ph\n", __func__, 3, buf); + + switch ((buf[0] >> 2) & 3) { + case 0: + c->modulation = QPSK; + break; + case 1: + c->modulation = QAM_16; + break; + case 2: + c->modulation = QAM_64; + break; + } + + switch ((buf[2] >> 2) & 1) { + case 0: + c->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + c->transmission_mode = TRANSMISSION_MODE_8K; + } + + switch ((buf[2] >> 0) & 3) { + case 0: + c->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + c->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + c->guard_interval = GUARD_INTERVAL_1_4; + break; + } + + switch ((buf[0] >> 4) & 7) { + case 0: + c->hierarchy = HIERARCHY_NONE; + break; + case 1: + c->hierarchy = HIERARCHY_1; + break; + case 2: + c->hierarchy = HIERARCHY_2; + break; + case 3: + c->hierarchy = HIERARCHY_4; + break; + } + + switch ((buf[1] >> 3) & 7) { + case 0: + c->code_rate_HP = FEC_1_2; + break; + case 1: + c->code_rate_HP = FEC_2_3; + break; + case 2: + c->code_rate_HP = FEC_3_4; + break; + case 3: + c->code_rate_HP = FEC_5_6; + break; + case 4: + c->code_rate_HP = FEC_7_8; + break; + } + + switch ((buf[1] >> 0) & 7) { + case 0: + c->code_rate_LP = FEC_1_2; + break; + case 1: + c->code_rate_LP = FEC_2_3; + break; + case 2: + c->code_rate_LP = FEC_3_4; + break; + case 3: + c->code_rate_LP = FEC_5_6; + break; + case 4: + c->code_rate_LP = FEC_7_8; + break; + } + + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -643,8 +748,7 @@ static int rtl2832_read_status(struct dvb_frontend *fe, fe_status_t *status) u32 tmp; *status = 0; - - dbg("%s", __func__); + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); if (priv->sleeping) return 0; @@ -664,33 +768,72 @@ static int rtl2832_read_status(struct dvb_frontend *fe, fe_status_t *status) return ret; err: - info("%s: failed=%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int rtl2832_read_snr(struct dvb_frontend *fe, u16 *snr) { - *snr = 0; + struct rtl2832_priv *priv = fe->demodulator_priv; + int ret, hierarchy, constellation; + u8 buf[2], tmp; + u16 tmp16; +#define CONSTELLATION_NUM 3 +#define HIERARCHY_NUM 4 + static const u32 snr_constant[CONSTELLATION_NUM][HIERARCHY_NUM] = { + { 85387325, 85387325, 85387325, 85387325 }, + { 86676178, 86676178, 87167949, 87795660 }, + { 87659938, 87659938, 87885178, 88241743 }, + }; + + /* reports SNR in resolution of 0.1 dB */ + + ret = rtl2832_rd_reg(priv, 0x3c, 3, &tmp); + if (ret) + goto err; + + constellation = (tmp >> 2) & 0x03; /* [3:2] */ + if (constellation > CONSTELLATION_NUM - 1) + goto err; + + hierarchy = (tmp >> 4) & 0x07; /* [6:4] */ + if (hierarchy > HIERARCHY_NUM - 1) + goto err; + + ret = rtl2832_rd_regs(priv, 0x0c, 4, buf, 2); + if (ret) + goto err; + + tmp16 = buf[0] << 8 | buf[1]; + + if (tmp16) + *snr = (snr_constant[constellation][hierarchy] - + intlog10(tmp16)) / ((1 << 24) / 100); + else + *snr = 0; + return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; } static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber) { - *ber = 0; - return 0; -} + struct rtl2832_priv *priv = fe->demodulator_priv; + int ret; + u8 buf[2]; -static int rtl2832_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) -{ - *ucblocks = 0; - return 0; -} + ret = rtl2832_rd_regs(priv, 0x4e, 3, buf, 2); + if (ret) + goto err; + *ber = buf[0] << 8 | buf[1]; -static int rtl2832_read_signal_strength(struct dvb_frontend *fe, u16 *strength) -{ - *strength = 0; return 0; +err: + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; } static struct dvb_frontend_ops rtl2832_ops; @@ -699,7 +842,7 @@ static void rtl2832_release(struct dvb_frontend *fe) { struct rtl2832_priv *priv = fe->demodulator_priv; - dbg("%s", __func__); + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); kfree(priv); } @@ -710,7 +853,7 @@ struct dvb_frontend *rtl2832_attach(const struct rtl2832_config *cfg, int ret = 0; u8 tmp; - dbg("%s", __func__); + dev_dbg(&i2c->dev, "%s:\n", __func__); /* allocate memory for the internal state */ priv = kzalloc(sizeof(struct rtl2832_priv), GFP_KERNEL); @@ -736,7 +879,7 @@ struct dvb_frontend *rtl2832_attach(const struct rtl2832_config *cfg, return &priv->fe; err: - dbg("%s: failed=%d", __func__, ret); + dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); kfree(priv); return NULL; } @@ -774,12 +917,12 @@ static struct dvb_frontend_ops rtl2832_ops = { .get_tune_settings = rtl2832_get_tune_settings, .set_frontend = rtl2832_set_frontend, + .get_frontend = rtl2832_get_frontend, .read_status = rtl2832_read_status, .read_snr = rtl2832_read_snr, .read_ber = rtl2832_read_ber, - .read_ucblocks = rtl2832_read_ucblocks, - .read_signal_strength = rtl2832_read_signal_strength, + .i2c_gate_ctrl = rtl2832_i2c_gate_ctrl, }; diff --git a/drivers/media/dvb/frontends/rtl2832.h b/drivers/media/dvb-frontends/rtl2832.h similarity index 84% rename from drivers/media/dvb/frontends/rtl2832.h rename to drivers/media/dvb-frontends/rtl2832.h index d94dc9a3fa628f9d1ce35743838782064ce47eee..785a466eb06555472d37ca092e34fbbdea287f4f 100644 --- a/drivers/media/dvb/frontends/rtl2832.h +++ b/drivers/media/dvb-frontends/rtl2832.h @@ -44,28 +44,29 @@ struct rtl2832_config { u32 if_dvbt; /* + * tuner + * XXX: This must be keep sync with dvb_usb_rtl28xxu demod driver. */ +#define RTL2832_TUNER_TUA9001 0x24 +#define RTL2832_TUNER_FC0012 0x26 +#define RTL2832_TUNER_E4000 0x27 +#define RTL2832_TUNER_FC0013 0x29 u8 tuner; }; - #if defined(CONFIG_DVB_RTL2832) || \ (defined(CONFIG_DVB_RTL2832_MODULE) && defined(MODULE)) extern struct dvb_frontend *rtl2832_attach( const struct rtl2832_config *cfg, struct i2c_adapter *i2c ); - -extern struct i2c_adapter *rtl2832_get_tuner_i2c_adapter( - struct dvb_frontend *fe -); #else static inline struct dvb_frontend *rtl2832_attach( const struct rtl2832_config *config, struct i2c_adapter *i2c ) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + pr_warn("%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif diff --git a/drivers/media/dvb/frontends/rtl2832_priv.h b/drivers/media/dvb-frontends/rtl2832_priv.h similarity index 55% rename from drivers/media/dvb/frontends/rtl2832_priv.h rename to drivers/media/dvb-frontends/rtl2832_priv.h index 0ce9502da8ba6817f4a96db3895462f33469e26a..7d97ce9d2193ea206ebae9fa3d7dcccf2db4a9f6 100644 --- a/drivers/media/dvb/frontends/rtl2832_priv.h +++ b/drivers/media/dvb-frontends/rtl2832_priv.h @@ -24,21 +24,6 @@ #include "dvb_frontend.h" #include "rtl2832.h" -#define LOG_PREFIX "rtl2832" - -#undef dbg -#define dbg(f, arg...) \ -do { \ - if (rtl2832_debug) \ - printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg); \ -} while (0) -#undef err -#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) -#undef info -#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) -#undef warn -#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg) - struct rtl2832_priv { struct i2c_adapter *i2c; struct dvb_frontend fe; @@ -257,4 +242,101 @@ enum DVBT_REG_BIT_NAME { DVBT_REG_BIT_NAME_ITEM_TERMINATOR, }; +static const struct rtl2832_reg_value rtl2832_tuner_init_tua9001[] = { + {DVBT_DAGC_TRG_VAL, 0x39}, + {DVBT_AGC_TARG_VAL_0, 0x0}, + {DVBT_AGC_TARG_VAL_8_1, 0x5a}, + {DVBT_AAGC_LOOP_GAIN, 0x16}, + {DVBT_LOOP_GAIN2_3_0, 0x6}, + {DVBT_LOOP_GAIN2_4, 0x1}, + {DVBT_LOOP_GAIN3, 0x16}, + {DVBT_VTOP1, 0x35}, + {DVBT_VTOP2, 0x21}, + {DVBT_VTOP3, 0x21}, + {DVBT_KRF1, 0x0}, + {DVBT_KRF2, 0x40}, + {DVBT_KRF3, 0x10}, + {DVBT_KRF4, 0x10}, + {DVBT_IF_AGC_MIN, 0x80}, + {DVBT_IF_AGC_MAX, 0x7f}, + {DVBT_RF_AGC_MIN, 0x9c}, + {DVBT_RF_AGC_MAX, 0x7f}, + {DVBT_POLAR_RF_AGC, 0x0}, + {DVBT_POLAR_IF_AGC, 0x0}, + {DVBT_AD7_SETTING, 0xe9f4}, + {DVBT_OPT_ADC_IQ, 0x1}, + {DVBT_AD_AVI, 0x0}, + {DVBT_AD_AVQ, 0x0}, +}; + +static const struct rtl2832_reg_value rtl2832_tuner_init_fc0012[] = { + {DVBT_DAGC_TRG_VAL, 0x5a}, + {DVBT_AGC_TARG_VAL_0, 0x0}, + {DVBT_AGC_TARG_VAL_8_1, 0x5a}, + {DVBT_AAGC_LOOP_GAIN, 0x16}, + {DVBT_LOOP_GAIN2_3_0, 0x6}, + {DVBT_LOOP_GAIN2_4, 0x1}, + {DVBT_LOOP_GAIN3, 0x16}, + {DVBT_VTOP1, 0x35}, + {DVBT_VTOP2, 0x21}, + {DVBT_VTOP3, 0x21}, + {DVBT_KRF1, 0x0}, + {DVBT_KRF2, 0x40}, + {DVBT_KRF3, 0x10}, + {DVBT_KRF4, 0x10}, + {DVBT_IF_AGC_MIN, 0x80}, + {DVBT_IF_AGC_MAX, 0x7f}, + {DVBT_RF_AGC_MIN, 0x80}, + {DVBT_RF_AGC_MAX, 0x7f}, + {DVBT_POLAR_RF_AGC, 0x0}, + {DVBT_POLAR_IF_AGC, 0x0}, + {DVBT_AD7_SETTING, 0xe9bf}, + {DVBT_EN_GI_PGA, 0x0}, + {DVBT_THD_LOCK_UP, 0x0}, + {DVBT_THD_LOCK_DW, 0x0}, + {DVBT_THD_UP1, 0x11}, + {DVBT_THD_DW1, 0xef}, + {DVBT_INTER_CNT_LEN, 0xc}, + {DVBT_GI_PGA_STATE, 0x0}, + {DVBT_EN_AGC_PGA, 0x1}, + {DVBT_IF_AGC_MAN, 0x0}, +}; + +static const struct rtl2832_reg_value rtl2832_tuner_init_e4000[] = { + {DVBT_DAGC_TRG_VAL, 0x5a}, + {DVBT_AGC_TARG_VAL_0, 0x0}, + {DVBT_AGC_TARG_VAL_8_1, 0x5a}, + {DVBT_AAGC_LOOP_GAIN, 0x18}, + {DVBT_LOOP_GAIN2_3_0, 0x8}, + {DVBT_LOOP_GAIN2_4, 0x1}, + {DVBT_LOOP_GAIN3, 0x18}, + {DVBT_VTOP1, 0x35}, + {DVBT_VTOP2, 0x21}, + {DVBT_VTOP3, 0x21}, + {DVBT_KRF1, 0x0}, + {DVBT_KRF2, 0x40}, + {DVBT_KRF3, 0x10}, + {DVBT_KRF4, 0x10}, + {DVBT_IF_AGC_MIN, 0x80}, + {DVBT_IF_AGC_MAX, 0x7f}, + {DVBT_RF_AGC_MIN, 0x80}, + {DVBT_RF_AGC_MAX, 0x7f}, + {DVBT_POLAR_RF_AGC, 0x0}, + {DVBT_POLAR_IF_AGC, 0x0}, + {DVBT_AD7_SETTING, 0xe9d4}, + {DVBT_EN_GI_PGA, 0x0}, + {DVBT_THD_LOCK_UP, 0x0}, + {DVBT_THD_LOCK_DW, 0x0}, + {DVBT_THD_UP1, 0x14}, + {DVBT_THD_DW1, 0xec}, + {DVBT_INTER_CNT_LEN, 0xc}, + {DVBT_GI_PGA_STATE, 0x0}, + {DVBT_EN_AGC_PGA, 0x1}, + {DVBT_REG_GPE, 0x1}, + {DVBT_REG_GPO, 0x1}, + {DVBT_REG_MONSEL, 0x1}, + {DVBT_REG_MON, 0x1}, + {DVBT_REG_4MSEL, 0x0}, +}; + #endif /* RTL2832_PRIV_H */ diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb-frontends/s5h1409.c similarity index 100% rename from drivers/media/dvb/frontends/s5h1409.c rename to drivers/media/dvb-frontends/s5h1409.c diff --git a/drivers/media/dvb/frontends/s5h1409.h b/drivers/media/dvb-frontends/s5h1409.h similarity index 100% rename from drivers/media/dvb/frontends/s5h1409.h rename to drivers/media/dvb-frontends/s5h1409.h diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb-frontends/s5h1411.c similarity index 100% rename from drivers/media/dvb/frontends/s5h1411.c rename to drivers/media/dvb-frontends/s5h1411.c diff --git a/drivers/media/dvb/frontends/s5h1411.h b/drivers/media/dvb-frontends/s5h1411.h similarity index 100% rename from drivers/media/dvb/frontends/s5h1411.h rename to drivers/media/dvb-frontends/s5h1411.h diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb-frontends/s5h1420.c similarity index 100% rename from drivers/media/dvb/frontends/s5h1420.c rename to drivers/media/dvb-frontends/s5h1420.c diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb-frontends/s5h1420.h similarity index 100% rename from drivers/media/dvb/frontends/s5h1420.h rename to drivers/media/dvb-frontends/s5h1420.h diff --git a/drivers/media/dvb/frontends/s5h1420_priv.h b/drivers/media/dvb-frontends/s5h1420_priv.h similarity index 100% rename from drivers/media/dvb/frontends/s5h1420_priv.h rename to drivers/media/dvb-frontends/s5h1420_priv.h diff --git a/drivers/media/dvb/frontends/s5h1432.c b/drivers/media/dvb-frontends/s5h1432.c similarity index 100% rename from drivers/media/dvb/frontends/s5h1432.c rename to drivers/media/dvb-frontends/s5h1432.c diff --git a/drivers/media/dvb/frontends/s5h1432.h b/drivers/media/dvb-frontends/s5h1432.h similarity index 100% rename from drivers/media/dvb/frontends/s5h1432.h rename to drivers/media/dvb-frontends/s5h1432.h diff --git a/drivers/media/dvb/frontends/s921.c b/drivers/media/dvb-frontends/s921.c similarity index 100% rename from drivers/media/dvb/frontends/s921.c rename to drivers/media/dvb-frontends/s921.c diff --git a/drivers/media/dvb/frontends/s921.h b/drivers/media/dvb-frontends/s921.h similarity index 100% rename from drivers/media/dvb/frontends/s921.h rename to drivers/media/dvb-frontends/s921.h diff --git a/drivers/media/dvb/frontends/si21xx.c b/drivers/media/dvb-frontends/si21xx.c similarity index 100% rename from drivers/media/dvb/frontends/si21xx.c rename to drivers/media/dvb-frontends/si21xx.c diff --git a/drivers/media/dvb/frontends/si21xx.h b/drivers/media/dvb-frontends/si21xx.h similarity index 100% rename from drivers/media/dvb/frontends/si21xx.h rename to drivers/media/dvb-frontends/si21xx.h diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c similarity index 100% rename from drivers/media/dvb/frontends/sp8870.c rename to drivers/media/dvb-frontends/sp8870.c diff --git a/drivers/media/dvb/frontends/sp8870.h b/drivers/media/dvb-frontends/sp8870.h similarity index 100% rename from drivers/media/dvb/frontends/sp8870.h rename to drivers/media/dvb-frontends/sp8870.h diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb-frontends/sp887x.c similarity index 100% rename from drivers/media/dvb/frontends/sp887x.c rename to drivers/media/dvb-frontends/sp887x.c diff --git a/drivers/media/dvb/frontends/sp887x.h b/drivers/media/dvb-frontends/sp887x.h similarity index 100% rename from drivers/media/dvb/frontends/sp887x.h rename to drivers/media/dvb-frontends/sp887x.h diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb-frontends/stb0899_algo.c similarity index 100% rename from drivers/media/dvb/frontends/stb0899_algo.c rename to drivers/media/dvb-frontends/stb0899_algo.c diff --git a/drivers/media/dvb/frontends/stb0899_cfg.h b/drivers/media/dvb-frontends/stb0899_cfg.h similarity index 100% rename from drivers/media/dvb/frontends/stb0899_cfg.h rename to drivers/media/dvb-frontends/stb0899_cfg.h diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb-frontends/stb0899_drv.c similarity index 99% rename from drivers/media/dvb/frontends/stb0899_drv.c rename to drivers/media/dvb-frontends/stb0899_drv.c index 5d7f8a9b451b8ec93fc596a6d813004b8866cd87..79e29de87fb7b50feb4f2fd65bed5e00c6b6ac8d 100644 --- a/drivers/media/dvb/frontends/stb0899_drv.c +++ b/drivers/media/dvb-frontends/stb0899_drv.c @@ -1563,6 +1563,7 @@ static int stb0899_get_frontend(struct dvb_frontend *fe) dprintk(state->verbose, FE_DEBUG, 1, "Get params"); p->symbol_rate = internal->srate; + p->frequency = internal->freq; return 0; } diff --git a/drivers/media/dvb/frontends/stb0899_drv.h b/drivers/media/dvb-frontends/stb0899_drv.h similarity index 100% rename from drivers/media/dvb/frontends/stb0899_drv.h rename to drivers/media/dvb-frontends/stb0899_drv.h diff --git a/drivers/media/dvb/frontends/stb0899_priv.h b/drivers/media/dvb-frontends/stb0899_priv.h similarity index 100% rename from drivers/media/dvb/frontends/stb0899_priv.h rename to drivers/media/dvb-frontends/stb0899_priv.h diff --git a/drivers/media/dvb/frontends/stb0899_reg.h b/drivers/media/dvb-frontends/stb0899_reg.h similarity index 100% rename from drivers/media/dvb/frontends/stb0899_reg.h rename to drivers/media/dvb-frontends/stb0899_reg.h diff --git a/drivers/media/dvb/frontends/stb6000.c b/drivers/media/dvb-frontends/stb6000.c similarity index 100% rename from drivers/media/dvb/frontends/stb6000.c rename to drivers/media/dvb-frontends/stb6000.c diff --git a/drivers/media/dvb/frontends/stb6000.h b/drivers/media/dvb-frontends/stb6000.h similarity index 100% rename from drivers/media/dvb/frontends/stb6000.h rename to drivers/media/dvb-frontends/stb6000.h diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb-frontends/stb6100.c similarity index 100% rename from drivers/media/dvb/frontends/stb6100.c rename to drivers/media/dvb-frontends/stb6100.c diff --git a/drivers/media/dvb/frontends/stb6100.h b/drivers/media/dvb-frontends/stb6100.h similarity index 100% rename from drivers/media/dvb/frontends/stb6100.h rename to drivers/media/dvb-frontends/stb6100.h diff --git a/drivers/media/dvb/frontends/stb6100_cfg.h b/drivers/media/dvb-frontends/stb6100_cfg.h similarity index 100% rename from drivers/media/dvb/frontends/stb6100_cfg.h rename to drivers/media/dvb-frontends/stb6100_cfg.h diff --git a/drivers/media/dvb/frontends/stb6100_proc.h b/drivers/media/dvb-frontends/stb6100_proc.h similarity index 100% rename from drivers/media/dvb/frontends/stb6100_proc.h rename to drivers/media/dvb-frontends/stb6100_proc.h diff --git a/drivers/media/dvb/frontends/stv0288.c b/drivers/media/dvb-frontends/stv0288.c similarity index 100% rename from drivers/media/dvb/frontends/stv0288.c rename to drivers/media/dvb-frontends/stv0288.c diff --git a/drivers/media/dvb/frontends/stv0288.h b/drivers/media/dvb-frontends/stv0288.h similarity index 100% rename from drivers/media/dvb/frontends/stv0288.h rename to drivers/media/dvb-frontends/stv0288.h diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb-frontends/stv0297.c similarity index 100% rename from drivers/media/dvb/frontends/stv0297.c rename to drivers/media/dvb-frontends/stv0297.c diff --git a/drivers/media/dvb/frontends/stv0297.h b/drivers/media/dvb-frontends/stv0297.h similarity index 100% rename from drivers/media/dvb/frontends/stv0297.h rename to drivers/media/dvb-frontends/stv0297.h diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb-frontends/stv0299.c similarity index 100% rename from drivers/media/dvb/frontends/stv0299.c rename to drivers/media/dvb-frontends/stv0299.c diff --git a/drivers/media/dvb/frontends/stv0299.h b/drivers/media/dvb-frontends/stv0299.h similarity index 100% rename from drivers/media/dvb/frontends/stv0299.h rename to drivers/media/dvb-frontends/stv0299.h diff --git a/drivers/media/dvb/frontends/stv0367.c b/drivers/media/dvb-frontends/stv0367.c similarity index 100% rename from drivers/media/dvb/frontends/stv0367.c rename to drivers/media/dvb-frontends/stv0367.c diff --git a/drivers/media/dvb/frontends/stv0367.h b/drivers/media/dvb-frontends/stv0367.h similarity index 100% rename from drivers/media/dvb/frontends/stv0367.h rename to drivers/media/dvb-frontends/stv0367.h diff --git a/drivers/media/dvb/frontends/stv0367_priv.h b/drivers/media/dvb-frontends/stv0367_priv.h similarity index 100% rename from drivers/media/dvb/frontends/stv0367_priv.h rename to drivers/media/dvb-frontends/stv0367_priv.h diff --git a/drivers/media/dvb/frontends/stv0367_regs.h b/drivers/media/dvb-frontends/stv0367_regs.h similarity index 100% rename from drivers/media/dvb/frontends/stv0367_regs.h rename to drivers/media/dvb-frontends/stv0367_regs.h diff --git a/drivers/media/dvb/frontends/stv0900.h b/drivers/media/dvb-frontends/stv0900.h similarity index 100% rename from drivers/media/dvb/frontends/stv0900.h rename to drivers/media/dvb-frontends/stv0900.h diff --git a/drivers/media/dvb/frontends/stv0900_core.c b/drivers/media/dvb-frontends/stv0900_core.c similarity index 100% rename from drivers/media/dvb/frontends/stv0900_core.c rename to drivers/media/dvb-frontends/stv0900_core.c diff --git a/drivers/media/dvb/frontends/stv0900_init.h b/drivers/media/dvb-frontends/stv0900_init.h similarity index 100% rename from drivers/media/dvb/frontends/stv0900_init.h rename to drivers/media/dvb-frontends/stv0900_init.h diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb-frontends/stv0900_priv.h similarity index 100% rename from drivers/media/dvb/frontends/stv0900_priv.h rename to drivers/media/dvb-frontends/stv0900_priv.h diff --git a/drivers/media/dvb/frontends/stv0900_reg.h b/drivers/media/dvb-frontends/stv0900_reg.h similarity index 100% rename from drivers/media/dvb/frontends/stv0900_reg.h rename to drivers/media/dvb-frontends/stv0900_reg.h diff --git a/drivers/media/dvb/frontends/stv0900_sw.c b/drivers/media/dvb-frontends/stv0900_sw.c similarity index 100% rename from drivers/media/dvb/frontends/stv0900_sw.c rename to drivers/media/dvb-frontends/stv0900_sw.c diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb-frontends/stv090x.c similarity index 99% rename from drivers/media/dvb/frontends/stv090x.c rename to drivers/media/dvb-frontends/stv090x.c index ea86a5603e5756106a342a18668d3b8889ebdd1e..13caec013902b72839c473be7d1ba3f02e7aa96d 100644 --- a/drivers/media/dvb/frontends/stv090x.c +++ b/drivers/media/dvb-frontends/stv090x.c @@ -3425,6 +3425,33 @@ static enum stv090x_signal_state stv090x_algo(struct stv090x_state *state) return -1; } +static int stv090x_set_mis(struct stv090x_state *state, int mis) +{ + u32 reg; + + if (mis < 0 || mis > 255) { + dprintk(FE_DEBUG, 1, "Disable MIS filtering"); + reg = STV090x_READ_DEMOD(state, PDELCTRL1); + STV090x_SETFIELD_Px(reg, FILTER_EN_FIELD, 0x00); + if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0) + goto err; + } else { + dprintk(FE_DEBUG, 1, "Enable MIS filtering - %d", mis); + reg = STV090x_READ_DEMOD(state, PDELCTRL1); + STV090x_SETFIELD_Px(reg, FILTER_EN_FIELD, 0x01); + if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, ISIENTRY, mis) < 0) + goto err; + if (STV090x_WRITE_DEMOD(state, ISIBITENA, 0xff) < 0) + goto err; + } + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + static enum dvbfe_search stv090x_search(struct dvb_frontend *fe) { struct stv090x_state *state = fe->demodulator_priv; @@ -3447,6 +3474,8 @@ static enum dvbfe_search stv090x_search(struct dvb_frontend *fe) state->search_range = 5000000; } + stv090x_set_mis(state, props->stream_id); + if (stv090x_algo(state) == STV090x_RANGEOK) { dprintk(FE_DEBUG, 1, "Search success!"); return DVBFE_ALGO_SEARCH_SUCCESS; @@ -4798,6 +4827,9 @@ struct dvb_frontend *stv090x_attach(const struct stv090x_config *config, } } + if (state->internal->dev_ver >= 0x30) + state->frontend.ops.info.caps |= FE_CAN_MULTISTREAM; + /* workaround for stuck DiSEqC output */ if (config->diseqc_envelope_mode) stv090x_send_diseqc_burst(&state->frontend, SEC_MINI_A); diff --git a/drivers/media/dvb/frontends/stv090x.h b/drivers/media/dvb-frontends/stv090x.h similarity index 100% rename from drivers/media/dvb/frontends/stv090x.h rename to drivers/media/dvb-frontends/stv090x.h diff --git a/drivers/media/dvb/frontends/stv090x_priv.h b/drivers/media/dvb-frontends/stv090x_priv.h similarity index 100% rename from drivers/media/dvb/frontends/stv090x_priv.h rename to drivers/media/dvb-frontends/stv090x_priv.h diff --git a/drivers/media/dvb/frontends/stv090x_reg.h b/drivers/media/dvb-frontends/stv090x_reg.h similarity index 100% rename from drivers/media/dvb/frontends/stv090x_reg.h rename to drivers/media/dvb-frontends/stv090x_reg.h diff --git a/drivers/media/dvb/frontends/stv6110.c b/drivers/media/dvb-frontends/stv6110.c similarity index 100% rename from drivers/media/dvb/frontends/stv6110.c rename to drivers/media/dvb-frontends/stv6110.c diff --git a/drivers/media/dvb/frontends/stv6110.h b/drivers/media/dvb-frontends/stv6110.h similarity index 100% rename from drivers/media/dvb/frontends/stv6110.h rename to drivers/media/dvb-frontends/stv6110.h diff --git a/drivers/media/dvb/frontends/stv6110x.c b/drivers/media/dvb-frontends/stv6110x.c similarity index 100% rename from drivers/media/dvb/frontends/stv6110x.c rename to drivers/media/dvb-frontends/stv6110x.c diff --git a/drivers/media/dvb/frontends/stv6110x.h b/drivers/media/dvb-frontends/stv6110x.h similarity index 100% rename from drivers/media/dvb/frontends/stv6110x.h rename to drivers/media/dvb-frontends/stv6110x.h diff --git a/drivers/media/dvb/frontends/stv6110x_priv.h b/drivers/media/dvb-frontends/stv6110x_priv.h similarity index 100% rename from drivers/media/dvb/frontends/stv6110x_priv.h rename to drivers/media/dvb-frontends/stv6110x_priv.h diff --git a/drivers/media/dvb/frontends/stv6110x_reg.h b/drivers/media/dvb-frontends/stv6110x_reg.h similarity index 100% rename from drivers/media/dvb/frontends/stv6110x_reg.h rename to drivers/media/dvb-frontends/stv6110x_reg.h diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb-frontends/tda10021.c similarity index 100% rename from drivers/media/dvb/frontends/tda10021.c rename to drivers/media/dvb-frontends/tda10021.c diff --git a/drivers/media/dvb/frontends/tda10023.c b/drivers/media/dvb-frontends/tda10023.c similarity index 100% rename from drivers/media/dvb/frontends/tda10023.c rename to drivers/media/dvb-frontends/tda10023.c diff --git a/drivers/media/dvb/frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h similarity index 100% rename from drivers/media/dvb/frontends/tda1002x.h rename to drivers/media/dvb-frontends/tda1002x.h diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c similarity index 100% rename from drivers/media/dvb/frontends/tda10048.c rename to drivers/media/dvb-frontends/tda10048.c diff --git a/drivers/media/dvb/frontends/tda10048.h b/drivers/media/dvb-frontends/tda10048.h similarity index 100% rename from drivers/media/dvb/frontends/tda10048.h rename to drivers/media/dvb-frontends/tda10048.h diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb-frontends/tda1004x.c similarity index 99% rename from drivers/media/dvb/frontends/tda1004x.c rename to drivers/media/dvb-frontends/tda1004x.c index 35d72b46aa1e81acc51706433738f21abac76767..a2631be7ffac9943384bdabc608b811f5686859e 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb-frontends/tda1004x.c @@ -329,6 +329,7 @@ static int tda1004x_do_upload(struct tda1004x_state *state, tda1004x_write_byteI(state, dspCodeCounterReg, 0); fw_msg.addr = state->config->demod_address; + i2c_lock_adapter(state->i2c); buf[0] = dspCodeInReg; while (pos != len) { // work out how much to send this time @@ -339,15 +340,18 @@ static int tda1004x_do_upload(struct tda1004x_state *state, // send the chunk memcpy(buf + 1, mem + pos, tx_size); fw_msg.len = tx_size + 1; - if (i2c_transfer(state->i2c, &fw_msg, 1) != 1) { + if (__i2c_transfer(state->i2c, &fw_msg, 1) != 1) { printk(KERN_ERR "tda1004x: Error during firmware upload\n"); + i2c_unlock_adapter(state->i2c); return -EIO; } pos += tx_size; dprintk("%s: fw_pos=0x%x\n", __func__, pos); } - // give the DSP a chance to settle 03/10/05 Hac + i2c_unlock_adapter(state->i2c); + + /* give the DSP a chance to settle 03/10/05 Hac */ msleep(100); return 0; diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb-frontends/tda1004x.h similarity index 100% rename from drivers/media/dvb/frontends/tda1004x.h rename to drivers/media/dvb-frontends/tda1004x.h diff --git a/drivers/media/dvb/frontends/tda10071.c b/drivers/media/dvb-frontends/tda10071.c similarity index 99% rename from drivers/media/dvb/frontends/tda10071.c rename to drivers/media/dvb-frontends/tda10071.c index 703c3d05f9f453f67f054234f4e86818743ff5f9..a83bf680234529a8504b6e3439e6b5f21fa3824b 100644 --- a/drivers/media/dvb/frontends/tda10071.c +++ b/drivers/media/dvb-frontends/tda10071.c @@ -257,7 +257,7 @@ static int tda10071_set_voltage(struct dvb_frontend *fe, __func__); ret = -EINVAL; goto error; - }; + } cmd.args[0] = CMD_LNB_SET_DC_LEVEL; cmd.args[1] = 0; @@ -369,7 +369,7 @@ static int tda10071_diseqc_recv_slave_reply(struct dvb_frontend *fe, if (ret) goto error; - reply->msg_len = tmp & 0x1f; /* [4:0] */; + reply->msg_len = tmp & 0x1f; /* [4:0] */ if (reply->msg_len > sizeof(reply->msg)) reply->msg_len = sizeof(reply->msg); /* truncate API max */ @@ -850,7 +850,7 @@ static int tda10071_init(struct dvb_frontend *fe) struct tda10071_cmd cmd; int ret, i, len, remaining, fw_size; const struct firmware *fw; - u8 *fw_file = TDA10071_DEFAULT_FIRMWARE; + u8 *fw_file = TDA10071_FIRMWARE; u8 tmp, buf[4]; struct tda10071_reg_val_mask tab[] = { { 0xcd, 0x00, 0x07 }, @@ -1282,3 +1282,4 @@ static struct dvb_frontend_ops tda10071_ops = { MODULE_AUTHOR("Antti Palosaari "); MODULE_DESCRIPTION("NXP TDA10071 DVB-S/S2 demodulator driver"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(TDA10071_FIRMWARE); diff --git a/drivers/media/dvb/frontends/tda10071.h b/drivers/media/dvb-frontends/tda10071.h similarity index 100% rename from drivers/media/dvb/frontends/tda10071.h rename to drivers/media/dvb-frontends/tda10071.h diff --git a/drivers/media/dvb/frontends/tda10071_priv.h b/drivers/media/dvb-frontends/tda10071_priv.h similarity index 98% rename from drivers/media/dvb/frontends/tda10071_priv.h rename to drivers/media/dvb-frontends/tda10071_priv.h index 0fa85cfa70c21d85b0f06952b0e8b035c6cd4c92..4baf14bfb65a6d6ca4a485861492efcdc955f006 100644 --- a/drivers/media/dvb/frontends/tda10071_priv.h +++ b/drivers/media/dvb-frontends/tda10071_priv.h @@ -77,7 +77,7 @@ struct tda10071_reg_val_mask { }; /* firmware filename */ -#define TDA10071_DEFAULT_FIRMWARE "dvb-fe-tda10071.fw" +#define TDA10071_FIRMWARE "dvb-fe-tda10071.fw" /* firmware commands */ #define CMD_DEMOD_INIT 0x10 diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb-frontends/tda10086.c similarity index 100% rename from drivers/media/dvb/frontends/tda10086.c rename to drivers/media/dvb-frontends/tda10086.c diff --git a/drivers/media/dvb/frontends/tda10086.h b/drivers/media/dvb-frontends/tda10086.h similarity index 100% rename from drivers/media/dvb/frontends/tda10086.h rename to drivers/media/dvb-frontends/tda10086.h diff --git a/drivers/media/dvb/frontends/tda18271c2dd.c b/drivers/media/dvb-frontends/tda18271c2dd.c similarity index 100% rename from drivers/media/dvb/frontends/tda18271c2dd.c rename to drivers/media/dvb-frontends/tda18271c2dd.c diff --git a/drivers/media/dvb/frontends/tda18271c2dd.h b/drivers/media/dvb-frontends/tda18271c2dd.h similarity index 100% rename from drivers/media/dvb/frontends/tda18271c2dd.h rename to drivers/media/dvb-frontends/tda18271c2dd.h diff --git a/drivers/media/dvb/frontends/tda18271c2dd_maps.h b/drivers/media/dvb-frontends/tda18271c2dd_maps.h similarity index 100% rename from drivers/media/dvb/frontends/tda18271c2dd_maps.h rename to drivers/media/dvb-frontends/tda18271c2dd_maps.h diff --git a/drivers/media/dvb/frontends/tda665x.c b/drivers/media/dvb-frontends/tda665x.c similarity index 100% rename from drivers/media/dvb/frontends/tda665x.c rename to drivers/media/dvb-frontends/tda665x.c diff --git a/drivers/media/dvb/frontends/tda665x.h b/drivers/media/dvb-frontends/tda665x.h similarity index 100% rename from drivers/media/dvb/frontends/tda665x.h rename to drivers/media/dvb-frontends/tda665x.h diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb-frontends/tda8083.c similarity index 100% rename from drivers/media/dvb/frontends/tda8083.c rename to drivers/media/dvb-frontends/tda8083.c diff --git a/drivers/media/dvb/frontends/tda8083.h b/drivers/media/dvb-frontends/tda8083.h similarity index 100% rename from drivers/media/dvb/frontends/tda8083.h rename to drivers/media/dvb-frontends/tda8083.h diff --git a/drivers/media/dvb/frontends/tda8261.c b/drivers/media/dvb-frontends/tda8261.c similarity index 86% rename from drivers/media/dvb/frontends/tda8261.c rename to drivers/media/dvb-frontends/tda8261.c index 53c7d8f1df289a373a3b96a143f87841f6fd0d43..19c488814e5c78e5b7e87e78419190d8e40faa11 100644 --- a/drivers/media/dvb/frontends/tda8261.c +++ b/drivers/media/dvb-frontends/tda8261.c @@ -43,7 +43,7 @@ static int tda8261_read(struct tda8261_state *state, u8 *buf) struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD,.buf = buf, .len = 1 }; if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) - printk("%s: read error, err=%d\n", __func__, err); + pr_err("%s: read error, err=%d\n", __func__, err); return err; } @@ -55,7 +55,7 @@ static int tda8261_write(struct tda8261_state *state, u8 *buf) struct i2c_msg msg = { .addr = config->addr, .flags = 0, .buf = buf, .len = 4 }; if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) - printk("%s: write error, err=%d\n", __func__, err); + pr_err("%s: write error, err=%d\n", __func__, err); return err; } @@ -69,11 +69,11 @@ static int tda8261_get_status(struct dvb_frontend *fe, u32 *status) *status = 0; if ((err = tda8261_read(state, &result)) < 0) { - printk("%s: I/O Error\n", __func__); + pr_err("%s: I/O Error\n", __func__); return err; } if ((result >> 6) & 0x01) { - printk("%s: Tuner Phase Locked\n", __func__); + pr_debug("%s: Tuner Phase Locked\n", __func__); *status = 1; } @@ -98,7 +98,7 @@ static int tda8261_get_state(struct dvb_frontend *fe, tstate->bandwidth = 40000000; /* FIXME! need to calculate Bandwidth */ break; default: - printk("%s: Unknown parameter (param=%d)\n", __func__, param); + pr_err("%s: Unknown parameter (param=%d)\n", __func__, param); err = -EINVAL; break; } @@ -124,11 +124,11 @@ static int tda8261_set_state(struct dvb_frontend *fe, */ frequency = tstate->frequency; if ((frequency < 950000) || (frequency > 2150000)) { - printk("%s: Frequency beyond limits, frequency=%d\n", __func__, frequency); + pr_warn("%s: Frequency beyond limits, frequency=%d\n", __func__, frequency); return -EINVAL; } N = (frequency + (div_tab[config->step_size] - 1)) / div_tab[config->step_size]; - printk("%s: Step size=%d, Divider=%d, PG=0x%02x (%d)\n", + pr_debug("%s: Step size=%d, Divider=%d, PG=0x%02x (%d)\n", __func__, config->step_size, div_tab[config->step_size], N, N); buf[0] = (N >> 8) & 0xff; @@ -144,25 +144,25 @@ static int tda8261_set_state(struct dvb_frontend *fe, /* Set params */ if ((err = tda8261_write(state, buf)) < 0) { - printk("%s: I/O Error\n", __func__); + pr_err("%s: I/O Error\n", __func__); return err; } /* sleep for some time */ - printk("%s: Waiting to Phase LOCK\n", __func__); + pr_debug("%s: Waiting to Phase LOCK\n", __func__); msleep(20); /* check status */ if ((err = tda8261_get_status(fe, &status)) < 0) { - printk("%s: I/O Error\n", __func__); + pr_err("%s: I/O Error\n", __func__); return err; } if (status == 1) { - printk("%s: Tuner Phase locked: status=%d\n", __func__, status); + pr_debug("%s: Tuner Phase locked: status=%d\n", __func__, status); state->frequency = frequency; /* cache successful state */ } else { - printk("%s: No Phase lock: status=%d\n", __func__, status); + pr_debug("%s: No Phase lock: status=%d\n", __func__, status); } } else { - printk("%s: Unknown parameter (param=%d)\n", __func__, param); + pr_err("%s: Unknown parameter (param=%d)\n", __func__, param); return -EINVAL; } @@ -214,7 +214,7 @@ struct dvb_frontend *tda8261_attach(struct dvb_frontend *fe, // printk("%s: Attaching %s TDA8261 8PSK/QPSK tuner\n", // __func__, fe->ops.tuner_ops.tuner_name); - printk("%s: Attaching TDA8261 8PSK/QPSK tuner\n", __func__); + pr_info("%s: Attaching TDA8261 8PSK/QPSK tuner\n", __func__); return fe; diff --git a/drivers/media/dvb/frontends/tda8261.h b/drivers/media/dvb-frontends/tda8261.h similarity index 100% rename from drivers/media/dvb/frontends/tda8261.h rename to drivers/media/dvb-frontends/tda8261.h diff --git a/drivers/media/dvb/frontends/tda8261_cfg.h b/drivers/media/dvb-frontends/tda8261_cfg.h similarity index 100% rename from drivers/media/dvb/frontends/tda8261_cfg.h rename to drivers/media/dvb-frontends/tda8261_cfg.h diff --git a/drivers/media/dvb/frontends/tda826x.c b/drivers/media/dvb-frontends/tda826x.c similarity index 100% rename from drivers/media/dvb/frontends/tda826x.c rename to drivers/media/dvb-frontends/tda826x.c diff --git a/drivers/media/dvb/frontends/tda826x.h b/drivers/media/dvb-frontends/tda826x.h similarity index 100% rename from drivers/media/dvb/frontends/tda826x.h rename to drivers/media/dvb-frontends/tda826x.h diff --git a/drivers/media/dvb/frontends/tdhd1.h b/drivers/media/dvb-frontends/tdhd1.h similarity index 100% rename from drivers/media/dvb/frontends/tdhd1.h rename to drivers/media/dvb-frontends/tdhd1.h diff --git a/drivers/media/dvb/frontends/tua6100.c b/drivers/media/dvb-frontends/tua6100.c similarity index 100% rename from drivers/media/dvb/frontends/tua6100.c rename to drivers/media/dvb-frontends/tua6100.c diff --git a/drivers/media/dvb/frontends/tua6100.h b/drivers/media/dvb-frontends/tua6100.h similarity index 100% rename from drivers/media/dvb/frontends/tua6100.h rename to drivers/media/dvb-frontends/tua6100.h diff --git a/drivers/media/dvb/frontends/ves1820.c b/drivers/media/dvb-frontends/ves1820.c similarity index 100% rename from drivers/media/dvb/frontends/ves1820.c rename to drivers/media/dvb-frontends/ves1820.c diff --git a/drivers/media/dvb/frontends/ves1820.h b/drivers/media/dvb-frontends/ves1820.h similarity index 100% rename from drivers/media/dvb/frontends/ves1820.h rename to drivers/media/dvb-frontends/ves1820.h diff --git a/drivers/media/dvb/frontends/ves1x93.c b/drivers/media/dvb-frontends/ves1x93.c similarity index 100% rename from drivers/media/dvb/frontends/ves1x93.c rename to drivers/media/dvb-frontends/ves1x93.c diff --git a/drivers/media/dvb/frontends/ves1x93.h b/drivers/media/dvb-frontends/ves1x93.h similarity index 100% rename from drivers/media/dvb/frontends/ves1x93.h rename to drivers/media/dvb-frontends/ves1x93.h diff --git a/drivers/media/dvb/frontends/z0194a.h b/drivers/media/dvb-frontends/z0194a.h similarity index 100% rename from drivers/media/dvb/frontends/z0194a.h rename to drivers/media/dvb-frontends/z0194a.h diff --git a/drivers/media/dvb/frontends/zl10036.c b/drivers/media/dvb-frontends/zl10036.c similarity index 100% rename from drivers/media/dvb/frontends/zl10036.c rename to drivers/media/dvb-frontends/zl10036.c diff --git a/drivers/media/dvb/frontends/zl10036.h b/drivers/media/dvb-frontends/zl10036.h similarity index 100% rename from drivers/media/dvb/frontends/zl10036.h rename to drivers/media/dvb-frontends/zl10036.h diff --git a/drivers/media/dvb/frontends/zl10039.c b/drivers/media/dvb-frontends/zl10039.c similarity index 100% rename from drivers/media/dvb/frontends/zl10039.c rename to drivers/media/dvb-frontends/zl10039.c diff --git a/drivers/media/dvb/frontends/zl10039.h b/drivers/media/dvb-frontends/zl10039.h similarity index 100% rename from drivers/media/dvb/frontends/zl10039.h rename to drivers/media/dvb-frontends/zl10039.h diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb-frontends/zl10353.c similarity index 100% rename from drivers/media/dvb/frontends/zl10353.c rename to drivers/media/dvb-frontends/zl10353.c diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb-frontends/zl10353.h similarity index 100% rename from drivers/media/dvb/frontends/zl10353.h rename to drivers/media/dvb-frontends/zl10353.h diff --git a/drivers/media/dvb/frontends/zl10353_priv.h b/drivers/media/dvb-frontends/zl10353_priv.h similarity index 100% rename from drivers/media/dvb/frontends/zl10353_priv.h rename to drivers/media/dvb-frontends/zl10353_priv.h diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig deleted file mode 100644 index f6e40b3a44cc2204f842969deec3ea72c3170b21..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/Kconfig +++ /dev/null @@ -1,91 +0,0 @@ -# -# DVB device configuration -# - -config DVB_MAX_ADAPTERS - int "maximum number of DVB/ATSC adapters" - depends on DVB_CORE - default 8 - range 1 255 - help - Maximum number of DVB/ATSC adapters. Increasing this number - increases the memory consumption of the DVB subsystem even - if a much lower number of DVB/ATSC adapters is present. - Only values in the range 4-32 are tested. - - If you are unsure about this, use the default value 8 - -config DVB_DYNAMIC_MINORS - bool "Dynamic DVB minor allocation" - depends on DVB_CORE - default n - help - If you say Y here, the DVB subsystem will use dynamic minor - allocation for any device that uses the DVB major number. - This means that you can have more than 4 of a single type - of device (like demuxes and frontends) per adapter, but udev - will be required to manage the device nodes. - - If you are unsure about this, say N here. - -menuconfig DVB_CAPTURE_DRIVERS - bool "DVB/ATSC adapters" - depends on DVB_CORE - default y - ---help--- - Say Y to select Digital TV adapters - -if DVB_CAPTURE_DRIVERS && DVB_CORE - -comment "Supported SAA7146 based PCI Adapters" - depends on DVB_CORE && PCI && I2C -source "drivers/media/dvb/ttpci/Kconfig" - -comment "Supported USB Adapters" - depends on DVB_CORE && USB && I2C -source "drivers/media/dvb/dvb-usb/Kconfig" -source "drivers/media/dvb/ttusb-budget/Kconfig" -source "drivers/media/dvb/ttusb-dec/Kconfig" -source "drivers/media/dvb/siano/Kconfig" - -comment "Supported FlexCopII (B2C2) Adapters" - depends on DVB_CORE && (PCI || USB) && I2C -source "drivers/media/dvb/b2c2/Kconfig" - -comment "Supported BT878 Adapters" - depends on DVB_CORE && PCI && I2C -source "drivers/media/dvb/bt8xx/Kconfig" - -comment "Supported Pluto2 Adapters" - depends on DVB_CORE && PCI && I2C -source "drivers/media/dvb/pluto2/Kconfig" - -comment "Supported SDMC DM1105 Adapters" - depends on DVB_CORE && PCI && I2C -source "drivers/media/dvb/dm1105/Kconfig" - -comment "Supported FireWire (IEEE 1394) Adapters" - depends on DVB_CORE && FIREWIRE -source "drivers/media/dvb/firewire/Kconfig" - -comment "Supported Earthsoft PT1 Adapters" - depends on DVB_CORE && PCI && I2C -source "drivers/media/dvb/pt1/Kconfig" - -comment "Supported Mantis Adapters" - depends on DVB_CORE && PCI && I2C - source "drivers/media/dvb/mantis/Kconfig" - -comment "Supported nGene Adapters" - depends on DVB_CORE && PCI && I2C - source "drivers/media/dvb/ngene/Kconfig" - -comment "Supported ddbridge ('Octopus') Adapters" - depends on DVB_CORE && PCI && I2C - source "drivers/media/dvb/ddbridge/Kconfig" - -comment "Supported DVB Frontends" - depends on DVB_CORE -source "drivers/media/dvb/frontends/Kconfig" - -endif # DVB_CAPTURE_DRIVERS diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile deleted file mode 100644 index b2cefe637a6410e42bb3ccc762beaa3c3b28901f..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# -# Makefile for the kernel multimedia device drivers. -# - -obj-y := dvb-core/ \ - frontends/ \ - ttpci/ \ - ttusb-dec/ \ - ttusb-budget/ \ - b2c2/ \ - bt8xx/ \ - dvb-usb/ \ - pluto2/ \ - siano/ \ - dm1105/ \ - pt1/ \ - mantis/ \ - ngene/ \ - ddbridge/ - -obj-$(CONFIG_DVB_FIREDTV) += firewire/ diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig deleted file mode 100644 index 9e578140074415361f966b4278b57c9fb5546cb3..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/b2c2/Kconfig +++ /dev/null @@ -1,45 +0,0 @@ -config DVB_B2C2_FLEXCOP - tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters" - depends on DVB_CORE && I2C - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_MT312 if !DVB_FE_CUSTOMISE - select DVB_NXT200X if !DVB_FE_CUSTOMISE - select DVB_STV0297 if !DVB_FE_CUSTOMISE - select DVB_BCM3510 if !DVB_FE_CUSTOMISE - select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select DVB_S5H1420 if !DVB_FE_CUSTOMISE - select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE - select DVB_ISL6421 if !DVB_FE_CUSTOMISE - select DVB_CX24123 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE - select DVB_TUNER_CX24113 if !DVB_FE_CUSTOMISE - help - Support for the digital TV receiver chip made by B2C2 Inc. included in - Technisats PCI cards and USB boxes. - - Say Y if you own such a device and want to use it. - -config DVB_B2C2_FLEXCOP_PCI - tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI" - depends on DVB_B2C2_FLEXCOP && PCI && I2C - help - Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2. - - Say Y if you own such a device and want to use it. - -config DVB_B2C2_FLEXCOP_USB - tristate "Technisat/B2C2 Air/Sky/Cable2PC USB" - depends on DVB_B2C2_FLEXCOP && USB && I2C - help - Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2, - - Say Y if you own such a device and want to use it. - -config DVB_B2C2_FLEXCOP_DEBUG - bool "Enable debug for the B2C2 FlexCop drivers" - depends on DVB_B2C2_FLEXCOP - help - Say Y if you want to enable the module option to control debug messages - of all B2C2 FlexCop drivers. diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile deleted file mode 100644 index 3d04a8dba99e962d30572de670a7f1816fdbb363..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/b2c2/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \ - flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o -obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o - -ifneq ($(CONFIG_DVB_B2C2_FLEXCOP_PCI),) -b2c2-flexcop-objs += flexcop-dma.o -endif - -b2c2-flexcop-pci-objs = flexcop-pci.o -obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o - -b2c2-flexcop-usb-objs = flexcop-usb.o -obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o - -ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ -ccflags-y += -Idrivers/media/common/tuners/ diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig deleted file mode 100644 index 8668e634c7ec96da068ed22ba013352e32626ba0..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/bt8xx/Kconfig +++ /dev/null @@ -1,22 +0,0 @@ -config DVB_BT8XX - tristate "BT8xx based PCI cards" - depends on DVB_CORE && PCI && I2C && VIDEO_BT848 - select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_SP887X if !DVB_FE_CUSTOMISE - select DVB_NXT6000 if !DVB_FE_CUSTOMISE - select DVB_CX24110 if !DVB_FE_CUSTOMISE - select DVB_OR51211 if !DVB_FE_CUSTOMISE - select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE - help - Support for PCI cards based on the Bt8xx PCI bridge. Examples are - the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards, - the pcHDTV HD2000 cards, the DViCO FusionHDTV Lite cards, and - some AVerMedia cards. - - Since these cards have no MPEG decoder onboard, they transmit - only compressed MPEG data over the PCI bus, so you need - an external software decoder to watch TV on your computer. - - Say Y if you own such a device and want to use it. diff --git a/drivers/media/dvb/bt8xx/Makefile b/drivers/media/dvb/bt8xx/Makefile deleted file mode 100644 index 0713b3af205071361fbd42218f090c85133faff8..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/bt8xx/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o - -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends -ccflags-y += -Idrivers/media/video/bt8xx -ccflags-y += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dm1105/Makefile b/drivers/media/dvb/dm1105/Makefile deleted file mode 100644 index 95a008b71fe539aae8db1d4276bc9f137460c2c5..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/dm1105/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_DVB_DM1105) += dm1105.o - -ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig deleted file mode 100644 index c2161565023a4682d0ba77a5e5b681491b8a31c4..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ /dev/null @@ -1,440 +0,0 @@ -config DVB_USB - tristate "Support for various USB DVB devices" - depends on DVB_CORE && USB && I2C && RC_CORE - help - By enabling this you will be able to choose the various supported - USB1.1 and USB2.0 DVB devices. - - Almost every USB device needs a firmware, please look into - . - - For a complete list of supported USB devices see the LinuxTV DVB Wiki: - - - Say Y if you own a USB DVB device. - -config DVB_USB_DEBUG - bool "Enable extended debug support for all DVB-USB devices" - depends on DVB_USB - help - Say Y if you want to enable debugging. See modinfo dvb-usb (and the - appropriate drivers) for debug levels. - -config DVB_USB_A800 - tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" - depends on DVB_USB - select DVB_DIB3000MC - select DVB_PLL if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. - -config DVB_USB_DIBUSB_MB - tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" - depends on DVB_USB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_DIB3000MB - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - help - Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by - DiBcom () equipped with a DiB3000M-B demodulator. - - For an up-to-date list of devices supported by this driver, have a look - on the Linux-DVB Wiki at www.linuxtv.org. - - Say Y if you own such a device and want to use it. You should build it as - a module. - -config DVB_USB_DIBUSB_MB_FAULTY - bool "Support faulty USB IDs" - depends on DVB_USB_DIBUSB_MB - help - Support for faulty USB IDs due to an invalid EEPROM on some Artec devices. - -config DVB_USB_DIBUSB_MC - tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" - depends on DVB_USB - select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - help - Support for USB2.0 DVB-T receivers based on reference designs made by - DiBcom () equipped with a DiB3000M-C/P demodulator. - - For an up-to-date list of devices supported by this driver, have a look - on the Linux-DVB Wiki at www.linuxtv.org. - - Say Y if you own such a device and want to use it. You should build it as - a module. - -config DVB_USB_DIB0700 - tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)" - depends on DVB_USB - select DVB_DIB7000P if !DVB_FE_CUSTOMISE - select DVB_DIB7000M if !DVB_FE_CUSTOMISE - select DVB_DIB8000 if !DVB_FE_CUSTOMISE - select DVB_DIB3000MC if !DVB_FE_CUSTOMISE - select DVB_S5H1411 if !DVB_FE_CUSTOMISE - select DVB_LGDT3305 if !DVB_FE_CUSTOMISE - select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE - select DVB_TUNER_DIB0090 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE - help - Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The - USB bridge is also present in devices having the DiB7700 DVB-T-USB - silicon. This chip can be found in devices offered by Hauppauge, - Avermedia and other big and small companies. - - For an up-to-date list of devices supported by this driver, have a look - on the LinuxTV Wiki at www.linuxtv.org. - - Say Y if you own such a device and want to use it. You should build it as - a module. - -config DVB_USB_UMT_010 - tristate "HanfTek UMT-010 DVB-T USB2.0 support" - depends on DVB_USB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - select DVB_MT352 if !DVB_FE_CUSTOMISE - help - Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. - -config DVB_USB_CXUSB - tristate "Conexant USB2.0 hybrid reference design support" - depends on DVB_USB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_CX22702 if !DVB_FE_CUSTOMISE - select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_DIB7000P if !DVB_FE_CUSTOMISE - select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE - select DVB_ATBM8830 if !DVB_FE_CUSTOMISE - select DVB_LGS8GXX if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Conexant USB2.0 hybrid reference design. - Currently, only DVB and ATSC modes are supported, analog mode - shall be added in the future. Devices that require this module: - - Medion MD95700 hybrid USB2.0 device. - DViCO FusionHDTV (Bluebird) USB2.0 devices - -config DVB_USB_M920X - tristate "Uli m920x DVB-T USB2.0 support" - depends on DVB_USB - select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_TDA1004X if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. - Currently, only devices with a product id of - "DTV USB MINI" (in cold state) are supported. - Firmware required. - -config DVB_USB_GL861 - tristate "Genesys Logic GL861 USB2.0 support" - depends on DVB_USB - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 - receiver with USB ID 0db0:5581. - -config DVB_USB_AU6610 - tristate "Alcor Micro AU6610 USB2.0 support" - depends on DVB_USB - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver. - -config DVB_USB_DIGITV - tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support" - depends on DVB_USB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_NXT6000 if !DVB_FE_CUSTOMISE - select DVB_MT352 if !DVB_FE_CUSTOMISE - help - Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver. - -config DVB_USB_VP7045 - tristate "TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0 support" - depends on DVB_USB - help - Say Y here to support the - - TwinhanDTV Alpha (stick) (VP-7045), - TwinhanDTV MagicBox II (VP-7046), - DigitalNow TinyUSB 2 DVB-t, - DigitalRise USB 2.0 Ter (Beetle) and - TYPHOON DVB-T USB DRIVE - - DVB-T USB2.0 receivers. - -config DVB_USB_VP702X - tristate "TwinhanDTV StarBox and clones DVB-S USB2.0 support" - depends on DVB_USB - help - Say Y here to support the - - TwinhanDTV StarBox, - DigitalRise USB Starbox and - TYPHOON DVB-S USB 2.0 BOX - - DVB-S USB2.0 receivers. - -config DVB_USB_GP8PSK - tristate "GENPIX 8PSK->USB module support" - depends on DVB_USB - help - Say Y here to support the - GENPIX 8psk module - - DVB-S USB2.0 receivers. - -config DVB_USB_NOVA_T_USB2 - tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" - depends on DVB_USB - select DVB_DIB3000MC - select DVB_PLL if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. - -config DVB_USB_TTUSB2 - tristate "Pinnacle 400e DVB-S USB2.0 support" - depends on DVB_USB - select DVB_TDA10086 if !DVB_FE_CUSTOMISE - select DVB_LNBP21 if !DVB_FE_CUSTOMISE - select DVB_TDA826X if !DVB_FE_CUSTOMISE - help - Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The - firmware protocol used by this module is similar to the one used by the - old ttusb-driver - that's why the module is called dvb-usb-ttusb2. - -config DVB_USB_DTT200U - tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" - depends on DVB_USB - help - Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. - - The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan). - - The WT-220U and its clones are pen-sized. - -config DVB_USB_OPERA1 - tristate "Opera1 DVB-S USB2.0 receiver" - depends on DVB_USB - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_PLL if !DVB_FE_CUSTOMISE - help - Say Y here to support the Opera DVB-S USB2.0 receiver. - -config DVB_USB_AF9005 - tristate "Afatech AF9005 DVB-T USB1.1 support" - depends on DVB_USB && EXPERIMENTAL - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver - and the TerraTec Cinergy T USB XE (Rev.1) - -config DVB_USB_AF9005_REMOTE - tristate "Afatech AF9005 default remote control support" - depends on DVB_USB_AF9005 - help - Say Y here to support the default remote control decoding for the - Afatech AF9005 based receiver. - -config DVB_USB_PCTV452E - tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600" - depends on DVB_USB - select TTPCI_EEPROM - select DVB_LNBP22 if !DVB_FE_CUSTOMISE - select DVB_STB0899 if !DVB_FE_CUSTOMISE - select DVB_STB6100 if !DVB_FE_CUSTOMISE - help - Support for external USB adapter designed by Pinnacle, - shipped under the brand name 'PCTV HDTV Pro USB'. - Also supports TT Connect S2-3600/3650 cards. - Say Y if you own such a device and want to use it. - -config DVB_USB_DW2102 - tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support" - depends on DVB_USB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_STV0288 if !DVB_FE_CUSTOMISE - select DVB_STB6000 if !DVB_FE_CUSTOMISE - select DVB_CX24116 if !DVB_FE_CUSTOMISE - select DVB_SI21XX if !DVB_FE_CUSTOMISE - select DVB_TDA10023 if !DVB_FE_CUSTOMISE - select DVB_MT312 if !DVB_FE_CUSTOMISE - select DVB_ZL10039 if !DVB_FE_CUSTOMISE - select DVB_DS3000 if !DVB_FE_CUSTOMISE - select DVB_STB6100 if !DVB_FE_CUSTOMISE - select DVB_STV6110 if !DVB_FE_CUSTOMISE - select DVB_STV0900 if !DVB_FE_CUSTOMISE - help - Say Y here to support the DvbWorld, TeVii, Prof DVB-S/S2 USB2.0 - receivers. - -config DVB_USB_CINERGY_T2 - tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver" - depends on DVB_USB - help - Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers - - Say Y if you own such a device and want to use it. - -config DVB_USB_ANYSEE - tristate "Anysee DVB-T/C USB2.0 support" - depends on DVB_USB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_TDA10023 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA18212 if !MEDIA_TUNER_CUSTOMISE - select DVB_CX24116 if !DVB_FE_CUSTOMISE - select DVB_STV0900 if !DVB_FE_CUSTOMISE - select DVB_STV6110 if !DVB_FE_CUSTOMISE - select DVB_ISL6423 if !DVB_FE_CUSTOMISE - select DVB_CXD2820R if !DVB_FE_CUSTOMISE - help - Say Y here to support the Anysee E30, Anysee E30 Plus or - Anysee E30 C Plus DVB USB2.0 receiver. - -config DVB_USB_DTV5100 - tristate "AME DTV-5100 USB2.0 DVB-T support" - depends on DVB_USB - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. - -config DVB_USB_AF9015 - tristate "Afatech AF9015 DVB-T USB2.0 support" - depends on DVB_USB - select DVB_AF9013 - select DVB_PLL if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA18218 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver - -config DVB_USB_CE6230 - tristate "Intel CE6230 DVB-T USB2.0 support" - depends on DVB_USB - select DVB_ZL10353 - select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver - -config DVB_USB_FRIIO - tristate "Friio ISDB-T USB2.0 Receiver support" - depends on DVB_USB - help - Say Y here to support the Japanese DTV receiver Friio. - -config DVB_USB_EC168 - tristate "E3C EC168 DVB-T USB2.0 support" - depends on DVB_USB - select DVB_EC100 - select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the E3C EC168 DVB-T USB2.0 receiver. - -config DVB_USB_AZ6007 - tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support" - depends on DVB_USB - select DVB_DRXK if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2063 if !DVB_FE_CUSTOMISE - help - Say Y here to support theAfatech AF9005 based DVB-T/DVB-C receivers. - -config DVB_USB_AZ6027 - tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support" - depends on DVB_USB - select DVB_STB0899 if !DVB_FE_CUSTOMISE - select DVB_STB6100 if !DVB_FE_CUSTOMISE - help - Say Y here to support the AZ6027 device - -config DVB_USB_LME2510 - tristate "LME DM04/QQBOX DVB-S USB2.0 support" - depends on DVB_USB - select DVB_TDA10086 if !DVB_FE_CUSTOMISE - select DVB_TDA826X if !DVB_FE_CUSTOMISE - select DVB_STV0288 if !DVB_FE_CUSTOMISE - select DVB_IX2505V if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_M88RS2000 if !DVB_FE_CUSTOMISE - help - Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 . - -config DVB_USB_TECHNISAT_USB2 - tristate "Technisat DVB-S/S2 USB2.0 support" - depends on DVB_USB - select DVB_STV090x if !DVB_FE_CUSTOMISE - select DVB_STV6110x if !DVB_FE_CUSTOMISE - help - Say Y here to support the Technisat USB2 DVB-S/S2 device - -config DVB_USB_IT913X - tristate "it913x driver" - depends on DVB_USB - select DVB_IT913X_FE - help - Say Y here to support the it913x device - -config DVB_USB_MXL111SF - tristate "MxL111SF DTV USB2.0 support" - depends on DVB_USB - select DVB_LGDT3305 if !DVB_FE_CUSTOMISE - select DVB_LG2160 if !DVB_FE_CUSTOMISE - select VIDEO_TVEEPROM - help - Say Y here to support the MxL111SF USB2.0 DTV receiver. - -config DVB_USB_RTL28XXU - tristate "Realtek RTL28xxU DVB USB support" - depends on DVB_USB && EXPERIMENTAL - select DVB_RTL2830 - select DVB_RTL2832 - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_FC0013 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Realtek RTL28xxU DVB USB receiver. - -config DVB_USB_AF9035 - tristate "Afatech AF9035 DVB-T USB2.0 support" - depends on DVB_USB - select DVB_AF9033 - select MEDIA_TUNER_TUA9001 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_FC0011 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA18218 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Afatech AF9035 based DVB USB receiver. - diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile deleted file mode 100644 index b667ac39a4e359eef6e173500cde10f46244de5d..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/dvb-usb/Makefile +++ /dev/null @@ -1,121 +0,0 @@ -dvb-usb-objs = dvb-usb-firmware.o dvb-usb-init.o dvb-usb-urb.o dvb-usb-i2c.o dvb-usb-dvb.o dvb-usb-remote.o usb-urb.o -obj-$(CONFIG_DVB_USB) += dvb-usb.o - -dvb-usb-vp7045-objs = vp7045.o vp7045-fe.o -obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o - -dvb-usb-vp702x-objs = vp702x.o vp702x-fe.o -obj-$(CONFIG_DVB_USB_VP702X) += dvb-usb-vp702x.o - -dvb-usb-gp8psk-objs = gp8psk.o gp8psk-fe.o -obj-$(CONFIG_DVB_USB_GP8PSK) += dvb-usb-gp8psk.o - -dvb-usb-dtt200u-objs = dtt200u.o dtt200u-fe.o -obj-$(CONFIG_DVB_USB_DTT200U) += dvb-usb-dtt200u.o - -dvb-usb-dibusb-common-objs = dibusb-common.o - -dvb-usb-a800-objs = a800.o -obj-$(CONFIG_DVB_USB_A800) += dvb-usb-dibusb-common.o dvb-usb-a800.o - -dvb-usb-dibusb-mb-objs = dibusb-mb.o -obj-$(CONFIG_DVB_USB_DIBUSB_MB) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mb.o - -dvb-usb-dibusb-mc-objs = dibusb-mc.o -obj-$(CONFIG_DVB_USB_DIBUSB_MC) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mc.o - -dvb-usb-nova-t-usb2-objs = nova-t-usb2.o -obj-$(CONFIG_DVB_USB_NOVA_T_USB2) += dvb-usb-dibusb-common.o dvb-usb-nova-t-usb2.o - -dvb-usb-umt-010-objs = umt-010.o -obj-$(CONFIG_DVB_USB_UMT_010) += dvb-usb-dibusb-common.o dvb-usb-umt-010.o - -dvb-usb-m920x-objs = m920x.o -obj-$(CONFIG_DVB_USB_M920X) += dvb-usb-m920x.o - -dvb-usb-gl861-objs = gl861.o -obj-$(CONFIG_DVB_USB_GL861) += dvb-usb-gl861.o - -dvb-usb-au6610-objs = au6610.o -obj-$(CONFIG_DVB_USB_AU6610) += dvb-usb-au6610.o - -dvb-usb-digitv-objs = digitv.o -obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o - -dvb-usb-cxusb-objs = cxusb.o -obj-$(CONFIG_DVB_USB_CXUSB) += dvb-usb-cxusb.o - -dvb-usb-ttusb2-objs = ttusb2.o -obj-$(CONFIG_DVB_USB_TTUSB2) += dvb-usb-ttusb2.o - -dvb-usb-dib0700-objs = dib0700_core.o dib0700_devices.o -obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o - -dvb-usb-opera-objs = opera1.o -obj-$(CONFIG_DVB_USB_OPERA1) += dvb-usb-opera.o - -dvb-usb-af9005-objs = af9005.o af9005-fe.o -obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o - -dvb-usb-af9005-remote-objs = af9005-remote.o -obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o - -dvb-usb-anysee-objs = anysee.o -obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o - -dvb-usb-pctv452e-objs = pctv452e.o -obj-$(CONFIG_DVB_USB_PCTV452E) += dvb-usb-pctv452e.o - -dvb-usb-dw2102-objs = dw2102.o -obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o - -dvb-usb-dtv5100-objs = dtv5100.o -obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o - -dvb-usb-af9015-objs = af9015.o -obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o - -dvb-usb-cinergyT2-objs = cinergyT2-core.o cinergyT2-fe.o -obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o - -dvb-usb-ce6230-objs = ce6230.o -obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o - -dvb-usb-friio-objs = friio.o friio-fe.o -obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o - -dvb-usb-ec168-objs = ec168.o -obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o - -dvb-usb-az6007-objs = az6007.o -obj-$(CONFIG_DVB_USB_AZ6007) += dvb-usb-az6007.o - -dvb-usb-az6027-objs = az6027.o -obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o - -dvb-usb-lmedm04-objs = lmedm04.o -obj-$(CONFIG_DVB_USB_LME2510) += dvb-usb-lmedm04.o - -dvb-usb-technisat-usb2-objs = technisat-usb2.o -obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o - -dvb-usb-it913x-objs := it913x.o -obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o - -dvb-usb-mxl111sf-objs = mxl111sf.o mxl111sf-phy.o mxl111sf-i2c.o mxl111sf-gpio.o -obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o -obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o -obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o - -dvb-usb-rtl28xxu-objs = rtl28xxu.o -obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o - -dvb-usb-af9035-objs = af9035.o -obj-$(CONFIG_DVB_USB_AF9035) += dvb-usb-af9035.o - -ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core -ccflags-y += -I$(srctree)/drivers/media/dvb/frontends/ -# due to tuner-xc3028 -ccflags-y += -I$(srctree)/drivers/media/common/tuners -ccflags-y += -I$(srctree)/drivers/media/dvb/ttpci - diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c deleted file mode 100644 index 677fed79b01e7227c2cc47fe72b9bbf48190495b..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ /dev/null @@ -1,1952 +0,0 @@ -/* - * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver - * - * Copyright (C) 2007 Antti Palosaari - * - * Thanks to Afatech who kindly provided information. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include -#include - -#include "af9015.h" -#include "af9013.h" -#include "mt2060.h" -#include "qt1010.h" -#include "tda18271.h" -#include "mxl5005s.h" -#include "mc44s803.h" -#include "tda18218.h" -#include "mxl5007t.h" - -static int dvb_usb_af9015_debug; -module_param_named(debug, dvb_usb_af9015_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); -static int dvb_usb_af9015_remote; -module_param_named(remote, dvb_usb_af9015_remote, int, 0644); -MODULE_PARM_DESC(remote, "select remote"); -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static DEFINE_MUTEX(af9015_usb_mutex); - -static struct af9015_config af9015_config; -static struct dvb_usb_device_properties af9015_properties[3]; -static int af9015_properties_count = ARRAY_SIZE(af9015_properties); - -static struct af9013_config af9015_af9013_config[] = { - { - .i2c_addr = AF9015_I2C_DEMOD, - .ts_mode = AF9013_TS_USB, - .api_version = { 0, 1, 9, 0 }, - .gpio[0] = AF9013_GPIO_HI, - .gpio[3] = AF9013_GPIO_TUNER_ON, - - }, { - .ts_mode = AF9013_TS_SERIAL, - .api_version = { 0, 1, 9, 0 }, - .gpio[0] = AF9013_GPIO_TUNER_ON, - .gpio[1] = AF9013_GPIO_LO, - } -}; - -static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) -{ -#define BUF_LEN 63 -#define REQ_HDR_LEN 8 /* send header size */ -#define ACK_HDR_LEN 2 /* rece header size */ - int act_len, ret; - u8 buf[BUF_LEN]; - u8 write = 1; - u8 msg_len = REQ_HDR_LEN; - static u8 seq; /* packet sequence number */ - - if (mutex_lock_interruptible(&af9015_usb_mutex) < 0) - return -EAGAIN; - - buf[0] = req->cmd; - buf[1] = seq++; - buf[2] = req->i2c_addr; - buf[3] = req->addr >> 8; - buf[4] = req->addr & 0xff; - buf[5] = req->mbox; - buf[6] = req->addr_len; - buf[7] = req->data_len; - - switch (req->cmd) { - case GET_CONFIG: - case READ_MEMORY: - case RECONNECT_USB: - write = 0; - break; - case READ_I2C: - write = 0; - buf[2] |= 0x01; /* set I2C direction */ - case WRITE_I2C: - buf[0] = READ_WRITE_I2C; - break; - case WRITE_MEMORY: - if (((req->addr & 0xff00) == 0xff00) || - ((req->addr & 0xff00) == 0xae00)) - buf[0] = WRITE_VIRTUAL_MEMORY; - case WRITE_VIRTUAL_MEMORY: - case COPY_FIRMWARE: - case DOWNLOAD_FIRMWARE: - case BOOT: - break; - default: - err("unknown command:%d", req->cmd); - ret = -1; - goto error_unlock; - } - - /* buffer overflow check */ - if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) || - (!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) { - err("too much data; cmd:%d len:%d", req->cmd, req->data_len); - ret = -EINVAL; - goto error_unlock; - } - - /* write requested */ - if (write) { - memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len); - msg_len += req->data_len; - } - - deb_xfer(">>> "); - debug_dump(buf, msg_len, deb_xfer); - - /* send req */ - ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len, - &act_len, AF9015_USB_TIMEOUT); - if (ret) - err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len); - else - if (act_len != msg_len) - ret = -1; /* all data is not send */ - if (ret) - goto error_unlock; - - /* no ack for those packets */ - if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB) - goto exit_unlock; - - /* write receives seq + status = 2 bytes - read receives seq + status + data = 2 + N bytes */ - msg_len = ACK_HDR_LEN; - if (!write) - msg_len += req->data_len; - - ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len, - &act_len, AF9015_USB_TIMEOUT); - if (ret) { - err("recv bulk message failed:%d", ret); - ret = -1; - goto error_unlock; - } - - deb_xfer("<<< "); - debug_dump(buf, act_len, deb_xfer); - - /* check status */ - if (buf[1]) { - err("command failed:%d", buf[1]); - ret = -1; - goto error_unlock; - } - - /* read request, copy returned data to return buf */ - if (!write) - memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len); - -error_unlock: -exit_unlock: - mutex_unlock(&af9015_usb_mutex); - - return ret; -} - -static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) -{ - return af9015_rw_udev(d->udev, req); -} - -static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val, - u8 len) -{ - struct req_t req = {WRITE_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, - val}; - return af9015_ctrl_msg(d, &req); -} - -static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val) -{ - return af9015_write_regs(d, addr, &val, 1); -} - -static int af9015_read_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len) -{ - struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, - val}; - return af9015_ctrl_msg(d, &req); -} - -static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val) -{ - return af9015_read_regs(d, addr, val, 1); -} - -static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, - u8 val) -{ - struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val}; - - if (addr == af9015_af9013_config[0].i2c_addr || - addr == af9015_af9013_config[1].i2c_addr) - req.addr_len = 3; - - return af9015_ctrl_msg(d, &req); -} - -static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, - u8 *val) -{ - struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val}; - - if (addr == af9015_af9013_config[0].i2c_addr || - addr == af9015_af9013_config[1].i2c_addr) - req.addr_len = 3; - - return af9015_ctrl_msg(d, &req); -} - -static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int ret = 0, i = 0; - u16 addr; - u8 uninitialized_var(mbox), addr_len; - struct req_t req; - -/* -The bus lock is needed because there is two tuners both using same I2C-address. -Due to that the only way to select correct tuner is use demodulator I2C-gate. - -................................................ -. AF9015 includes integrated AF9013 demodulator. -. ____________ ____________ . ____________ -.| uC | | demod | . | tuner | -.|------------| |------------| . |------------| -.| AF9015 | | AF9013/5 | . | MXL5003 | -.| |--+----I2C-------|-----/ -----|-.-----I2C-------| | -.| | | | addr 0x38 | . | addr 0xc6 | -.|____________| | |____________| . |____________| -.................|.............................. - | ____________ ____________ - | | demod | | tuner | - | |------------| |------------| - | | AF9013 | | MXL5003 | - +----I2C-------|-----/ -----|-------I2C-------| | - | addr 0x3a | | addr 0xc6 | - |____________| |____________| -*/ - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - while (i < num) { - if (msg[i].addr == af9015_af9013_config[0].i2c_addr || - msg[i].addr == af9015_af9013_config[1].i2c_addr) { - addr = msg[i].buf[0] << 8; - addr += msg[i].buf[1]; - mbox = msg[i].buf[2]; - addr_len = 3; - } else { - addr = msg[i].buf[0]; - addr_len = 1; - /* mbox is don't care in that case */ - } - - if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { - if (msg[i].len > 3 || msg[i+1].len > 61) { - ret = -EOPNOTSUPP; - goto error; - } - if (msg[i].addr == af9015_af9013_config[0].i2c_addr) - req.cmd = READ_MEMORY; - else - req.cmd = READ_I2C; - req.i2c_addr = msg[i].addr; - req.addr = addr; - req.mbox = mbox; - req.addr_len = addr_len; - req.data_len = msg[i+1].len; - req.data = &msg[i+1].buf[0]; - ret = af9015_ctrl_msg(d, &req); - i += 2; - } else if (msg[i].flags & I2C_M_RD) { - if (msg[i].len > 61) { - ret = -EOPNOTSUPP; - goto error; - } - if (msg[i].addr == - af9015_af9013_config[0].i2c_addr) { - ret = -EINVAL; - goto error; - } - req.cmd = READ_I2C; - req.i2c_addr = msg[i].addr; - req.addr = addr; - req.mbox = mbox; - req.addr_len = addr_len; - req.data_len = msg[i].len; - req.data = &msg[i].buf[0]; - ret = af9015_ctrl_msg(d, &req); - i += 1; - } else { - if (msg[i].len > 21) { - ret = -EOPNOTSUPP; - goto error; - } - if (msg[i].addr == af9015_af9013_config[0].i2c_addr) - req.cmd = WRITE_MEMORY; - else - req.cmd = WRITE_I2C; - req.i2c_addr = msg[i].addr; - req.addr = addr; - req.mbox = mbox; - req.addr_len = addr_len; - req.data_len = msg[i].len-addr_len; - req.data = &msg[i].buf[addr_len]; - ret = af9015_ctrl_msg(d, &req); - i += 1; - } - if (ret) - goto error; - - } - ret = i; - -error: - mutex_unlock(&d->i2c_mutex); - - return ret; -} - -static u32 af9015_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm af9015_i2c_algo = { - .master_xfer = af9015_i2c_xfer, - .functionality = af9015_i2c_func, -}; - -static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op) -{ - int ret; - u8 val, mask = 0x01; - - ret = af9015_read_reg(d, addr, &val); - if (ret) - return ret; - - mask <<= bit; - if (op) { - /* set bit */ - val |= mask; - } else { - /* clear bit */ - mask ^= 0xff; - val &= mask; - } - - return af9015_write_reg(d, addr, val); -} - -static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) -{ - return af9015_do_reg_bit(d, addr, bit, 1); -} - -static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) -{ - return af9015_do_reg_bit(d, addr, bit, 0); -} - -static int af9015_init_endpoint(struct dvb_usb_device *d) -{ - int ret; - u16 frame_size; - u8 packet_size; - deb_info("%s: USB speed:%d\n", __func__, d->udev->speed); - - /* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0. - We use smaller - about 1/4 from the original, 5 and 87. */ -#define TS_PACKET_SIZE 188 - -#define TS_USB20_PACKET_COUNT 87 -#define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT) - -#define TS_USB11_PACKET_COUNT 5 -#define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT) - -#define TS_USB20_MAX_PACKET_SIZE 512 -#define TS_USB11_MAX_PACKET_SIZE 64 - - if (d->udev->speed == USB_SPEED_FULL) { - frame_size = TS_USB11_FRAME_SIZE/4; - packet_size = TS_USB11_MAX_PACKET_SIZE/4; - } else { - frame_size = TS_USB20_FRAME_SIZE/4; - packet_size = TS_USB20_MAX_PACKET_SIZE/4; - } - - ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */ - if (ret) - goto error; - ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */ - if (ret) - goto error; - ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */ - if (ret) - goto error; - ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */ - if (ret) - goto error; - ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */ - if (ret) - goto error; - if (af9015_config.dual_mode) { - ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */ - if (ret) - goto error; - } - ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */ - if (ret) - goto error; - if (af9015_config.dual_mode) { - ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */ - if (ret) - goto error; - } - /* EP4 xfer length */ - ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff); - if (ret) - goto error; - ret = af9015_write_reg(d, 0xdd89, frame_size >> 8); - if (ret) - goto error; - /* EP5 xfer length */ - ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff); - if (ret) - goto error; - ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8); - if (ret) - goto error; - ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */ - if (ret) - goto error; - ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */ - if (ret) - goto error; - ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */ - if (ret) - goto error; - if (af9015_config.dual_mode) { - ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */ - if (ret) - goto error; - } - - /* enable / disable mp2if2 */ - if (af9015_config.dual_mode) - ret = af9015_set_reg_bit(d, 0xd50b, 0); - else - ret = af9015_clear_reg_bit(d, 0xd50b, 0); - -error: - if (ret) - err("endpoint init failed:%d", ret); - return ret; -} - -static int af9015_copy_firmware(struct dvb_usb_device *d) -{ - int ret; - u8 fw_params[4]; - u8 val, i; - struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params), - fw_params }; - deb_info("%s:\n", __func__); - - fw_params[0] = af9015_config.firmware_size >> 8; - fw_params[1] = af9015_config.firmware_size & 0xff; - fw_params[2] = af9015_config.firmware_checksum >> 8; - fw_params[3] = af9015_config.firmware_checksum & 0xff; - - /* wait 2nd demodulator ready */ - msleep(100); - - ret = af9015_read_reg_i2c(d, - af9015_af9013_config[1].i2c_addr, 0x98be, &val); - if (ret) - goto error; - else - deb_info("%s: firmware status:%02x\n", __func__, val); - - if (val == 0x0c) /* fw is running, no need for download */ - goto exit; - - /* set I2C master clock to fast (to speed up firmware copy) */ - ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */ - if (ret) - goto error; - - msleep(50); - - /* copy firmware */ - ret = af9015_ctrl_msg(d, &req); - if (ret) - err("firmware copy cmd failed:%d", ret); - deb_info("%s: firmware copy done\n", __func__); - - /* set I2C master clock back to normal */ - ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */ - if (ret) - goto error; - - /* request boot firmware */ - ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].i2c_addr, - 0xe205, 1); - deb_info("%s: firmware boot cmd status:%d\n", __func__, ret); - if (ret) - goto error; - - for (i = 0; i < 15; i++) { - msleep(100); - - /* check firmware status */ - ret = af9015_read_reg_i2c(d, - af9015_af9013_config[1].i2c_addr, 0x98be, &val); - deb_info("%s: firmware status cmd status:%d fw status:%02x\n", - __func__, ret, val); - if (ret) - goto error; - - if (val == 0x0c || val == 0x04) /* success or fail */ - break; - } - - if (val == 0x04) { - err("firmware did not run"); - ret = -1; - } else if (val != 0x0c) { - err("firmware boot timeout"); - ret = -1; - } - -error: -exit: - return ret; -} - -/* hash (and dump) eeprom */ -static int af9015_eeprom_hash(struct usb_device *udev) -{ - static const unsigned int eeprom_size = 256; - unsigned int reg; - int ret; - u8 val, *eeprom; - struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; - - eeprom = kmalloc(eeprom_size, GFP_KERNEL); - if (eeprom == NULL) - return -ENOMEM; - - for (reg = 0; reg < eeprom_size; reg++) { - req.addr = reg; - ret = af9015_rw_udev(udev, &req); - if (ret) - goto free; - eeprom[reg] = val; - } - - if (dvb_usb_af9015_debug & 0x01) - print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom, - eeprom_size); - - BUG_ON(eeprom_size % 4); - - af9015_config.eeprom_sum = 0; - for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) { - af9015_config.eeprom_sum *= GOLDEN_RATIO_PRIME_32; - af9015_config.eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]); - } - - deb_info("%s: eeprom sum=%.8x\n", __func__, af9015_config.eeprom_sum); - - ret = 0; -free: - kfree(eeprom); - return ret; -} - -static int af9015_init(struct dvb_usb_device *d) -{ - int ret; - deb_info("%s:\n", __func__); - - /* init RC canary */ - ret = af9015_write_reg(d, 0x98e9, 0xff); - if (ret) - goto error; - - ret = af9015_init_endpoint(d); - if (ret) - goto error; - -error: - return ret; -} - -static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - int ret; - deb_info("%s: onoff:%d\n", __func__, onoff); - - if (onoff) - ret = af9015_set_reg_bit(adap->dev, 0xd503, 0); - else - ret = af9015_clear_reg_bit(adap->dev, 0xd503, 0); - - return ret; -} - -static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, - int onoff) -{ - int ret; - u8 idx; - - deb_info("%s: set pid filter, index %d, pid %x, onoff %d\n", - __func__, index, pid, onoff); - - ret = af9015_write_reg(adap->dev, 0xd505, (pid & 0xff)); - if (ret) - goto error; - - ret = af9015_write_reg(adap->dev, 0xd506, (pid >> 8)); - if (ret) - goto error; - - idx = ((index & 0x1f) | (1 << 5)); - ret = af9015_write_reg(adap->dev, 0xd504, idx); - -error: - return ret; -} - -static int af9015_download_firmware(struct usb_device *udev, - const struct firmware *fw) -{ - int i, len, remaining, ret; - struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL}; - u16 checksum = 0; - - deb_info("%s:\n", __func__); - - /* calc checksum */ - for (i = 0; i < fw->size; i++) - checksum += fw->data[i]; - - af9015_config.firmware_size = fw->size; - af9015_config.firmware_checksum = checksum; - - #define FW_ADDR 0x5100 /* firmware start address */ - #define LEN_MAX 55 /* max packet size */ - for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) { - len = remaining; - if (len > LEN_MAX) - len = LEN_MAX; - - req.data_len = len; - req.data = (u8 *) &fw->data[fw->size - remaining]; - req.addr = FW_ADDR + fw->size - remaining; - - ret = af9015_rw_udev(udev, &req); - if (ret) { - err("firmware download failed:%d", ret); - goto error; - } - } - - /* firmware loaded, request boot */ - req.cmd = BOOT; - ret = af9015_rw_udev(udev, &req); - if (ret) { - err("firmware boot failed:%d", ret); - goto error; - } - -error: - return ret; -} - -struct af9015_rc_setup { - unsigned int id; - char *rc_codes; -}; - -static char *af9015_rc_setup_match(unsigned int id, - const struct af9015_rc_setup *table) -{ - for (; table->rc_codes; table++) - if (table->id == id) - return table->rc_codes; - return NULL; -} - -static const struct af9015_rc_setup af9015_rc_setup_modparam[] = { - { AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M }, - { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II }, - { AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND }, - { AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE }, - { AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS }, - { } -}; - -static const struct af9015_rc_setup af9015_rc_setup_hashes[] = { - { 0xb8feb708, RC_MAP_MSI_DIGIVOX_II }, - { 0xa3703d00, RC_MAP_ALINK_DTU_M }, - { 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */ - { 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */ - { } -}; - -static const struct af9015_rc_setup af9015_rc_setup_usbids[] = { - { (USB_VID_TERRATEC << 16) | USB_PID_TERRATEC_CINERGY_T_STICK_RC, - RC_MAP_TERRATEC_SLIM_2 }, - { (USB_VID_TERRATEC << 16) | USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC, - RC_MAP_TERRATEC_SLIM }, - { (USB_VID_VISIONPLUS << 16) | USB_PID_AZUREWAVE_AD_TU700, - RC_MAP_AZUREWAVE_AD_TU700 }, - { (USB_VID_VISIONPLUS << 16) | USB_PID_TINYTWIN, - RC_MAP_AZUREWAVE_AD_TU700 }, - { (USB_VID_MSI_2 << 16) | USB_PID_MSI_DIGI_VOX_MINI_III, - RC_MAP_MSI_DIGIVOX_III }, - { (USB_VID_MSI_2 << 16) | USB_PID_MSI_DIGIVOX_DUO, - RC_MAP_MSI_DIGIVOX_III }, - { (USB_VID_LEADTEK << 16) | USB_PID_WINFAST_DTV_DONGLE_GOLD, - RC_MAP_LEADTEK_Y04G0051 }, - { (USB_VID_LEADTEK << 16) | USB_PID_WINFAST_DTV2000DS, - RC_MAP_LEADTEK_Y04G0051 }, - { (USB_VID_AVERMEDIA << 16) | USB_PID_AVERMEDIA_VOLAR_X, - RC_MAP_AVERMEDIA_M135A }, - { (USB_VID_AFATECH << 16) | USB_PID_TREKSTOR_DVBT, - RC_MAP_TREKSTOR }, - { (USB_VID_KWORLD_2 << 16) | USB_PID_TINYTWIN_2, - RC_MAP_DIGITALNOW_TINYTWIN }, - { (USB_VID_GTEK << 16) | USB_PID_TINYTWIN_3, - RC_MAP_DIGITALNOW_TINYTWIN }, - { (USB_VID_KWORLD_2 << 16) | USB_PID_SVEON_STV22, - RC_MAP_MSI_DIGIVOX_III }, - { } -}; - -static void af9015_set_remote_config(struct usb_device *udev, - struct dvb_usb_device_properties *props) -{ - u16 vid = le16_to_cpu(udev->descriptor.idVendor); - u16 pid = le16_to_cpu(udev->descriptor.idProduct); - - /* try to load remote based module param */ - props->rc.core.rc_codes = af9015_rc_setup_match( - dvb_usb_af9015_remote, af9015_rc_setup_modparam); - - /* try to load remote based eeprom hash */ - if (!props->rc.core.rc_codes) - props->rc.core.rc_codes = af9015_rc_setup_match( - af9015_config.eeprom_sum, af9015_rc_setup_hashes); - - /* try to load remote based USB ID */ - if (!props->rc.core.rc_codes) - props->rc.core.rc_codes = af9015_rc_setup_match( - (vid << 16) | pid, af9015_rc_setup_usbids); - - /* try to load remote based USB iManufacturer string */ - if (!props->rc.core.rc_codes && vid == USB_VID_AFATECH) { - /* Check USB manufacturer and product strings and try - to determine correct remote in case of chip vendor - reference IDs are used. - DO NOT ADD ANYTHING NEW HERE. Use hashes instead. */ - char manufacturer[10]; - memset(manufacturer, 0, sizeof(manufacturer)); - usb_string(udev, udev->descriptor.iManufacturer, - manufacturer, sizeof(manufacturer)); - if (!strcmp("MSI", manufacturer)) { - /* iManufacturer 1 MSI - iProduct 2 MSI K-VOX */ - props->rc.core.rc_codes = af9015_rc_setup_match( - AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, - af9015_rc_setup_modparam); - } - } - - /* finally load "empty" just for leaving IR receiver enabled */ - if (!props->rc.core.rc_codes) - props->rc.core.rc_codes = RC_MAP_EMPTY; - - return; -} - -static int af9015_read_config(struct usb_device *udev) -{ - int ret; - u8 val, i, offset = 0; - struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; - - /* IR remote controller */ - req.addr = AF9015_EEPROM_IR_MODE; - /* first message will timeout often due to possible hw bug */ - for (i = 0; i < 4; i++) { - ret = af9015_rw_udev(udev, &req); - if (!ret) - break; - } - if (ret) - goto error; - - ret = af9015_eeprom_hash(udev); - if (ret) - goto error; - - deb_info("%s: IR mode=%d\n", __func__, val); - for (i = 0; i < af9015_properties_count; i++) { - if (val == AF9015_IR_MODE_DISABLED) - af9015_properties[i].rc.core.rc_codes = NULL; - else - af9015_set_remote_config(udev, &af9015_properties[i]); - } - - /* TS mode - one or two receivers */ - req.addr = AF9015_EEPROM_TS_MODE; - ret = af9015_rw_udev(udev, &req); - if (ret) - goto error; - af9015_config.dual_mode = val; - deb_info("%s: TS mode=%d\n", __func__, af9015_config.dual_mode); - - /* Set adapter0 buffer size according to USB port speed, adapter1 buffer - size can be static because it is enabled only USB2.0 */ - for (i = 0; i < af9015_properties_count; i++) { - /* USB1.1 set smaller buffersize and disable 2nd adapter */ - if (udev->speed == USB_SPEED_FULL) { - af9015_properties[i].adapter[0].fe[0].stream.u.bulk.buffersize - = TS_USB11_FRAME_SIZE; - /* disable 2nd adapter because we don't have - PID-filters */ - af9015_config.dual_mode = 0; - } else { - af9015_properties[i].adapter[0].fe[0].stream.u.bulk.buffersize - = TS_USB20_FRAME_SIZE; - } - } - - if (af9015_config.dual_mode) { - /* read 2nd demodulator I2C address */ - req.addr = AF9015_EEPROM_DEMOD2_I2C; - ret = af9015_rw_udev(udev, &req); - if (ret) - goto error; - af9015_af9013_config[1].i2c_addr = val; - - /* enable 2nd adapter */ - for (i = 0; i < af9015_properties_count; i++) - af9015_properties[i].num_adapters = 2; - - } else { - /* disable 2nd adapter */ - for (i = 0; i < af9015_properties_count; i++) - af9015_properties[i].num_adapters = 1; - } - - for (i = 0; i < af9015_properties[0].num_adapters; i++) { - if (i == 1) - offset = AF9015_EEPROM_OFFSET; - /* xtal */ - req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset; - ret = af9015_rw_udev(udev, &req); - if (ret) - goto error; - switch (val) { - case 0: - af9015_af9013_config[i].clock = 28800000; - break; - case 1: - af9015_af9013_config[i].clock = 20480000; - break; - case 2: - af9015_af9013_config[i].clock = 28000000; - break; - case 3: - af9015_af9013_config[i].clock = 25000000; - break; - }; - deb_info("%s: [%d] xtal=%d set clock=%d\n", __func__, i, - val, af9015_af9013_config[i].clock); - - /* IF frequency */ - req.addr = AF9015_EEPROM_IF1H + offset; - ret = af9015_rw_udev(udev, &req); - if (ret) - goto error; - - af9015_af9013_config[i].if_frequency = val << 8; - - req.addr = AF9015_EEPROM_IF1L + offset; - ret = af9015_rw_udev(udev, &req); - if (ret) - goto error; - - af9015_af9013_config[i].if_frequency += val; - af9015_af9013_config[i].if_frequency *= 1000; - deb_info("%s: [%d] IF frequency=%d\n", __func__, i, - af9015_af9013_config[0].if_frequency); - - /* MT2060 IF1 */ - req.addr = AF9015_EEPROM_MT2060_IF1H + offset; - ret = af9015_rw_udev(udev, &req); - if (ret) - goto error; - af9015_config.mt2060_if1[i] = val << 8; - req.addr = AF9015_EEPROM_MT2060_IF1L + offset; - ret = af9015_rw_udev(udev, &req); - if (ret) - goto error; - af9015_config.mt2060_if1[i] += val; - deb_info("%s: [%d] MT2060 IF1=%d\n", __func__, i, - af9015_config.mt2060_if1[i]); - - /* tuner */ - req.addr = AF9015_EEPROM_TUNER_ID1 + offset; - ret = af9015_rw_udev(udev, &req); - if (ret) - goto error; - switch (val) { - case AF9013_TUNER_ENV77H11D5: - case AF9013_TUNER_MT2060: - case AF9013_TUNER_QT1010: - case AF9013_TUNER_UNKNOWN: - case AF9013_TUNER_MT2060_2: - case AF9013_TUNER_TDA18271: - case AF9013_TUNER_QT1010A: - case AF9013_TUNER_TDA18218: - af9015_af9013_config[i].spec_inv = 1; - break; - case AF9013_TUNER_MXL5003D: - case AF9013_TUNER_MXL5005D: - case AF9013_TUNER_MXL5005R: - case AF9013_TUNER_MXL5007T: - af9015_af9013_config[i].spec_inv = 0; - break; - case AF9013_TUNER_MC44S803: - af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO; - af9015_af9013_config[i].spec_inv = 1; - break; - default: - warn("tuner id=%d not supported, please report!", val); - return -ENODEV; - }; - - af9015_af9013_config[i].tuner = val; - deb_info("%s: [%d] tuner id=%d\n", __func__, i, val); - } - -error: - if (ret) - err("eeprom read failed=%d", ret); - - /* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM - content :-( Override some wrong values here. Ditto for the - AVerTV Red HD+ (A850T) device. */ - if (le16_to_cpu(udev->descriptor.idVendor) == USB_VID_AVERMEDIA && - ((le16_to_cpu(udev->descriptor.idProduct) == - USB_PID_AVERMEDIA_A850) || - (le16_to_cpu(udev->descriptor.idProduct) == - USB_PID_AVERMEDIA_A850T))) { - deb_info("%s: AverMedia A850: overriding config\n", __func__); - /* disable dual mode */ - af9015_config.dual_mode = 0; - /* disable 2nd adapter */ - for (i = 0; i < af9015_properties_count; i++) - af9015_properties[i].num_adapters = 1; - - /* set correct IF */ - af9015_af9013_config[0].if_frequency = 4570000; - } - - return ret; -} - -static int af9015_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - int ret; - u8 reply; - struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply}; - - ret = af9015_rw_udev(udev, &req); - if (ret) - return ret; - - deb_info("%s: reply:%02x\n", __func__, reply); - if (reply == 0x02) - *cold = 0; - else - *cold = 1; - - return ret; -} - -static int af9015_rc_query(struct dvb_usb_device *d) -{ - struct af9015_state *priv = d->priv; - int ret; - u8 buf[17]; - - /* read registers needed to detect remote controller code */ - ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf)); - if (ret) - goto error; - - /* If any of these are non-zero, assume invalid data */ - if (buf[1] || buf[2] || buf[3]) - return ret; - - /* Check for repeat of previous code */ - if ((priv->rc_repeat != buf[6] || buf[0]) && - !memcmp(&buf[12], priv->rc_last, 4)) { - deb_rc("%s: key repeated\n", __func__); - rc_keydown(d->rc_dev, priv->rc_keycode, 0); - priv->rc_repeat = buf[6]; - return ret; - } - - /* Only process key if canary killed */ - if (buf[16] != 0xff && buf[0] != 0x01) { - deb_rc("%s: key pressed %02x %02x %02x %02x\n", __func__, - buf[12], buf[13], buf[14], buf[15]); - - /* Reset the canary */ - ret = af9015_write_reg(d, 0x98e9, 0xff); - if (ret) - goto error; - - /* Remember this key */ - memcpy(priv->rc_last, &buf[12], 4); - if (buf[14] == (u8) ~buf[15]) { - if (buf[12] == (u8) ~buf[13]) { - /* NEC */ - priv->rc_keycode = buf[12] << 8 | buf[14]; - } else { - /* NEC extended*/ - priv->rc_keycode = buf[12] << 16 | - buf[13] << 8 | buf[14]; - } - } else { - /* 32 bit NEC */ - priv->rc_keycode = buf[12] << 24 | buf[13] << 16 | - buf[14] << 8 | buf[15]; - } - rc_keydown(d->rc_dev, priv->rc_keycode, 0); - } else { - deb_rc("%s: no key press\n", __func__); - /* Invalidate last keypress */ - /* Not really needed, but helps with debug */ - priv->rc_last[2] = priv->rc_last[3]; - } - - priv->rc_repeat = buf[6]; - -error: - if (ret) - err("%s: failed:%d", __func__, ret); - - return ret; -} - -/* override demod callbacks for resource locking */ -static int af9015_af9013_set_frontend(struct dvb_frontend *fe) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; - - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) - return -EAGAIN; - - ret = priv->set_frontend[adap->id](fe); - - mutex_unlock(&adap->dev->usb_mutex); - - return ret; -} - -/* override demod callbacks for resource locking */ -static int af9015_af9013_read_status(struct dvb_frontend *fe, - fe_status_t *status) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; - - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) - return -EAGAIN; - - ret = priv->read_status[adap->id](fe, status); - - mutex_unlock(&adap->dev->usb_mutex); - - return ret; -} - -/* override demod callbacks for resource locking */ -static int af9015_af9013_init(struct dvb_frontend *fe) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; - - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) - return -EAGAIN; - - ret = priv->init[adap->id](fe); - - mutex_unlock(&adap->dev->usb_mutex); - - return ret; -} - -/* override demod callbacks for resource locking */ -static int af9015_af9013_sleep(struct dvb_frontend *fe) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; - - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) - return -EAGAIN; - - ret = priv->sleep[adap->id](fe); - - mutex_unlock(&adap->dev->usb_mutex); - - return ret; -} - -/* override tuner callbacks for resource locking */ -static int af9015_tuner_init(struct dvb_frontend *fe) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; - - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) - return -EAGAIN; - - ret = priv->tuner_init[adap->id](fe); - - mutex_unlock(&adap->dev->usb_mutex); - - return ret; -} - -/* override tuner callbacks for resource locking */ -static int af9015_tuner_sleep(struct dvb_frontend *fe) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; - - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) - return -EAGAIN; - - ret = priv->tuner_sleep[adap->id](fe); - - mutex_unlock(&adap->dev->usb_mutex); - - return ret; -} - - -static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) -{ - int ret; - struct af9015_state *state = adap->dev->priv; - - if (adap->id == 1) { - /* copy firmware to 2nd demodulator */ - if (af9015_config.dual_mode) { - ret = af9015_copy_firmware(adap->dev); - if (ret) { - err("firmware copy to 2nd frontend " \ - "failed, will disable it"); - af9015_config.dual_mode = 0; - return -ENODEV; - } - } else { - return -ENODEV; - } - } - - /* attach demodulator */ - adap->fe_adap[0].fe = dvb_attach(af9013_attach, - &af9015_af9013_config[adap->id], &adap->dev->i2c_adap); - - /* - * AF9015 firmware does not like if it gets interrupted by I2C adapter - * request on some critical phases. During normal operation I2C adapter - * is used only 2nd demodulator and tuner on dual tuner devices. - * Override demodulator callbacks and use mutex for limit access to - * those "critical" paths to keep AF9015 happy. - * Note: we abuse unused usb_mutex here. - */ - if (adap->fe_adap[0].fe) { - state->set_frontend[adap->id] = - adap->fe_adap[0].fe->ops.set_frontend; - adap->fe_adap[0].fe->ops.set_frontend = - af9015_af9013_set_frontend; - - state->read_status[adap->id] = - adap->fe_adap[0].fe->ops.read_status; - adap->fe_adap[0].fe->ops.read_status = - af9015_af9013_read_status; - - state->init[adap->id] = adap->fe_adap[0].fe->ops.init; - adap->fe_adap[0].fe->ops.init = af9015_af9013_init; - - state->sleep[adap->id] = adap->fe_adap[0].fe->ops.sleep; - adap->fe_adap[0].fe->ops.sleep = af9015_af9013_sleep; - } - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static struct mt2060_config af9015_mt2060_config = { - .i2c_address = 0xc0, - .clock_out = 0, -}; - -static struct qt1010_config af9015_qt1010_config = { - .i2c_address = 0xc4, -}; - -static struct tda18271_config af9015_tda18271_config = { - .gate = TDA18271_GATE_DIGITAL, - .small_i2c = TDA18271_16_BYTE_CHUNK_INIT, -}; - -static struct mxl5005s_config af9015_mxl5003_config = { - .i2c_address = 0xc6, - .if_freq = IF_FREQ_4570000HZ, - .xtal_freq = CRYSTAL_FREQ_16000000HZ, - .agc_mode = MXL_SINGLE_AGC, - .tracking_filter = MXL_TF_DEFAULT, - .rssi_enable = MXL_RSSI_ENABLE, - .cap_select = MXL_CAP_SEL_ENABLE, - .div_out = MXL_DIV_OUT_4, - .clock_out = MXL_CLOCK_OUT_DISABLE, - .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, - .top = MXL5005S_TOP_25P2, - .mod_mode = MXL_DIGITAL_MODE, - .if_mode = MXL_ZERO_IF, - .AgcMasterByte = 0x00, -}; - -static struct mxl5005s_config af9015_mxl5005_config = { - .i2c_address = 0xc6, - .if_freq = IF_FREQ_4570000HZ, - .xtal_freq = CRYSTAL_FREQ_16000000HZ, - .agc_mode = MXL_SINGLE_AGC, - .tracking_filter = MXL_TF_OFF, - .rssi_enable = MXL_RSSI_ENABLE, - .cap_select = MXL_CAP_SEL_ENABLE, - .div_out = MXL_DIV_OUT_4, - .clock_out = MXL_CLOCK_OUT_DISABLE, - .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, - .top = MXL5005S_TOP_25P2, - .mod_mode = MXL_DIGITAL_MODE, - .if_mode = MXL_ZERO_IF, - .AgcMasterByte = 0x00, -}; - -static struct mc44s803_config af9015_mc44s803_config = { - .i2c_address = 0xc0, - .dig_out = 1, -}; - -static struct tda18218_config af9015_tda18218_config = { - .i2c_address = 0xc0, - .i2c_wr_max = 21, /* max wr bytes AF9015 I2C adap can handle at once */ -}; - -static struct mxl5007t_config af9015_mxl5007t_config = { - .xtal_freq_hz = MxL_XTAL_24_MHZ, - .if_freq_hz = MxL_IF_4_57_MHZ, -}; - -static int af9015_tuner_attach(struct dvb_usb_adapter *adap) -{ - int ret; - struct af9015_state *state = adap->dev->priv; - deb_info("%s:\n", __func__); - - switch (af9015_af9013_config[adap->id].tuner) { - case AF9013_TUNER_MT2060: - case AF9013_TUNER_MT2060_2: - ret = dvb_attach(mt2060_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, &af9015_mt2060_config, - af9015_config.mt2060_if1[adap->id]) - == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_QT1010: - case AF9013_TUNER_QT1010A: - ret = dvb_attach(qt1010_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, - &af9015_qt1010_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_TDA18271: - ret = dvb_attach(tda18271_attach, adap->fe_adap[0].fe, 0xc0, - &adap->dev->i2c_adap, - &af9015_tda18271_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_TDA18218: - ret = dvb_attach(tda18218_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, - &af9015_tda18218_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_MXL5003D: - ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, - &af9015_mxl5003_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_MXL5005D: - case AF9013_TUNER_MXL5005R: - ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, - &af9015_mxl5005_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_ENV77H11D5: - ret = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0xc0, - &adap->dev->i2c_adap, - DVB_PLL_TDA665X) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_MC44S803: - ret = dvb_attach(mc44s803_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, - &af9015_mc44s803_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_MXL5007T: - ret = dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, - 0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_UNKNOWN: - default: - ret = -ENODEV; - err("Unknown tuner id:%d", - af9015_af9013_config[adap->id].tuner); - } - - if (adap->fe_adap[0].fe->ops.tuner_ops.init) { - state->tuner_init[adap->id] = - adap->fe_adap[0].fe->ops.tuner_ops.init; - adap->fe_adap[0].fe->ops.tuner_ops.init = af9015_tuner_init; - } - - if (adap->fe_adap[0].fe->ops.tuner_ops.sleep) { - state->tuner_sleep[adap->id] = - adap->fe_adap[0].fe->ops.tuner_ops.sleep; - adap->fe_adap[0].fe->ops.tuner_ops.sleep = af9015_tuner_sleep; - } - - return ret; -} - -enum af9015_usb_table_entry { - AFATECH_9015, - AFATECH_9016, - WINFAST_DTV_GOLD, - PINNACLE_PCTV_71E, - KWORLD_PLUSTV_399U, - TINYTWIN, - AZUREWAVE_TU700, - TERRATEC_AF9015, - KWORLD_PLUSTV_PC160, - AVERTV_VOLAR_X, - XTENSIONS_380U, - MSI_DIGIVOX_DUO, - AVERTV_VOLAR_X_REV2, - TELESTAR_STARSTICK_2, - AVERMEDIA_A309_USB, - MSI_DIGIVOX_MINI_III, - KWORLD_E396, - KWORLD_E39B, - KWORLD_E395, - TREKSTOR_DVBT, - AVERTV_A850, - AVERTV_A805, - CONCEPTRONIC_CTVDIGRCU, - KWORLD_MC810, - GENIUS_TVGO_DVB_T03, - KWORLD_399U_2, - KWORLD_PC160_T, - SVEON_STV20, - TINYTWIN_2, - WINFAST_DTV2000DS, - KWORLD_UB383_T, - KWORLD_E39A, - AVERMEDIA_A815M, - CINERGY_T_STICK_RC, - CINERGY_T_DUAL_RC, - AVERTV_A850T, - TINYTWIN_3, - SVEON_STV22, -}; - -static struct usb_device_id af9015_usb_table[] = { - [AFATECH_9015] = { - USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015)}, - [AFATECH_9016] = { - USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016)}, - [WINFAST_DTV_GOLD] = { - USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD)}, - [PINNACLE_PCTV_71E] = { - USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E)}, - [KWORLD_PLUSTV_399U] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U)}, - [TINYTWIN] = { - USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN)}, - [AZUREWAVE_TU700] = { - USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700)}, - [TERRATEC_AF9015] = { - USB_DEVICE(USB_VID_TERRATEC, - USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2)}, - [KWORLD_PLUSTV_PC160] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T)}, - [AVERTV_VOLAR_X] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X)}, - [XTENSIONS_380U] = { - USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380)}, - [MSI_DIGIVOX_DUO] = { - USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)}, - [AVERTV_VOLAR_X_REV2] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, - [TELESTAR_STARSTICK_2] = { - USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2)}, - [AVERMEDIA_A309_USB] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309)}, - [MSI_DIGIVOX_MINI_III] = { - USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III)}, - [KWORLD_E396] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U)}, - [KWORLD_E39B] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2)}, - [KWORLD_E395] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3)}, - [TREKSTOR_DVBT] = { - USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT)}, - [AVERTV_A850] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850)}, - [AVERTV_A805] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805)}, - [CONCEPTRONIC_CTVDIGRCU] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU)}, - [KWORLD_MC810] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810)}, - [GENIUS_TVGO_DVB_T03] = { - USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03)}, - [KWORLD_399U_2] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2)}, - [KWORLD_PC160_T] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T)}, - [SVEON_STV20] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20)}, - [TINYTWIN_2] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2)}, - [WINFAST_DTV2000DS] = { - USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS)}, - [KWORLD_UB383_T] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T)}, - [KWORLD_E39A] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4)}, - [AVERMEDIA_A815M] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M)}, - [CINERGY_T_STICK_RC] = { - USB_DEVICE(USB_VID_TERRATEC, - USB_PID_TERRATEC_CINERGY_T_STICK_RC)}, - [CINERGY_T_DUAL_RC] = { - USB_DEVICE(USB_VID_TERRATEC, - USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC)}, - [AVERTV_A850T] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T)}, - [TINYTWIN_3] = { - USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3)}, - [SVEON_STV22] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22)}, - { } -}; -MODULE_DEVICE_TABLE(usb, af9015_usb_table); - -#define AF9015_RC_INTERVAL 500 -static struct dvb_usb_device_properties af9015_properties[] = { - { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .download_firmware = af9015_download_firmware, - .firmware = "dvb-usb-af9015.fw", - .no_reconnect = 1, - - .size_of_priv = sizeof(struct af9015_state), - - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = { - { - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - - .pid_filter_count = 32, - .pid_filter = af9015_pid_filter, - .pid_filter_ctrl = af9015_pid_filter_ctrl, - - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x84, - }, - } - }, - }, - { - .num_frontends = 1, - .fe = { - { - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x85, - .u = { - .bulk = { - .buffersize = TS_USB20_FRAME_SIZE, - } - } - }, - } - }, - } - }, - - .identify_state = af9015_identify_state, - - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "af9015", - .rc_query = af9015_rc_query, - .rc_interval = AF9015_RC_INTERVAL, - .allowed_protos = RC_TYPE_NEC, - }, - - .i2c_algo = &af9015_i2c_algo, - - .num_device_descs = 12, /* check max from dvb-usb.h */ - .devices = { - { - .name = "Afatech AF9015 DVB-T USB2.0 stick", - .cold_ids = { - &af9015_usb_table[AFATECH_9015], - &af9015_usb_table[AFATECH_9016], - }, - }, { - .name = "Leadtek WinFast DTV Dongle Gold", - .cold_ids = { - &af9015_usb_table[WINFAST_DTV_GOLD], - }, - }, { - .name = "Pinnacle PCTV 71e", - .cold_ids = { - &af9015_usb_table[PINNACLE_PCTV_71E], - }, - }, { - .name = "KWorld PlusTV Dual DVB-T Stick " \ - "(DVB-T 399U)", - .cold_ids = { - &af9015_usb_table[KWORLD_PLUSTV_399U], - &af9015_usb_table[KWORLD_399U_2], - }, - }, { - .name = "DigitalNow TinyTwin DVB-T Receiver", - .cold_ids = { - &af9015_usb_table[TINYTWIN], - &af9015_usb_table[TINYTWIN_2], - &af9015_usb_table[TINYTWIN_3], - }, - }, { - .name = "TwinHan AzureWave AD-TU700(704J)", - .cold_ids = { - &af9015_usb_table[AZUREWAVE_TU700], - }, - }, { - .name = "TerraTec Cinergy T USB XE", - .cold_ids = { - &af9015_usb_table[TERRATEC_AF9015], - }, - }, { - .name = "KWorld PlusTV Dual DVB-T PCI " \ - "(DVB-T PC160-2T)", - .cold_ids = { - &af9015_usb_table[KWORLD_PLUSTV_PC160], - }, - }, { - .name = "AVerMedia AVerTV DVB-T Volar X", - .cold_ids = { - &af9015_usb_table[AVERTV_VOLAR_X], - }, - }, { - .name = "TerraTec Cinergy T Stick RC", - .cold_ids = { - &af9015_usb_table[CINERGY_T_STICK_RC], - }, - }, { - .name = "TerraTec Cinergy T Stick Dual RC", - .cold_ids = { - &af9015_usb_table[CINERGY_T_DUAL_RC], - }, - }, { - .name = "AverMedia AVerTV Red HD+ (A850T)", - .cold_ids = { - &af9015_usb_table[AVERTV_A850T], - }, - }, - } - }, { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .download_firmware = af9015_download_firmware, - .firmware = "dvb-usb-af9015.fw", - .no_reconnect = 1, - - .size_of_priv = sizeof(struct af9015_state), - - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = { - { - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - - .pid_filter_count = 32, - .pid_filter = af9015_pid_filter, - .pid_filter_ctrl = af9015_pid_filter_ctrl, - - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x84, - }, - } - }, - }, - { - .num_frontends = 1, - .fe = { - { - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x85, - .u = { - .bulk = { - .buffersize = TS_USB20_FRAME_SIZE, - } - } - }, - } - }, - } - }, - - .identify_state = af9015_identify_state, - - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "af9015", - .rc_query = af9015_rc_query, - .rc_interval = AF9015_RC_INTERVAL, - .allowed_protos = RC_TYPE_NEC, - }, - - .i2c_algo = &af9015_i2c_algo, - - .num_device_descs = 10, /* check max from dvb-usb.h */ - .devices = { - { - .name = "Xtensions XD-380", - .cold_ids = { - &af9015_usb_table[XTENSIONS_380U], - }, - }, { - .name = "MSI DIGIVOX Duo", - .cold_ids = { - &af9015_usb_table[MSI_DIGIVOX_DUO], - }, - }, { - .name = "Fujitsu-Siemens Slim Mobile USB DVB-T", - .cold_ids = { - &af9015_usb_table[AVERTV_VOLAR_X_REV2], - }, - }, { - .name = "Telestar Starstick 2", - .cold_ids = { - &af9015_usb_table[TELESTAR_STARSTICK_2], - }, - }, { - .name = "AVerMedia A309", - .cold_ids = { - &af9015_usb_table[AVERMEDIA_A309_USB], - }, - }, { - .name = "MSI Digi VOX mini III", - .cold_ids = { - &af9015_usb_table[MSI_DIGIVOX_MINI_III], - }, - }, { - .name = "KWorld USB DVB-T TV Stick II " \ - "(VS-DVB-T 395U)", - .cold_ids = { - &af9015_usb_table[KWORLD_E396], - &af9015_usb_table[KWORLD_E39B], - &af9015_usb_table[KWORLD_E395], - &af9015_usb_table[KWORLD_E39A], - }, - }, { - .name = "TrekStor DVB-T USB Stick", - .cold_ids = { - &af9015_usb_table[TREKSTOR_DVBT], - }, - }, { - .name = "AverMedia AVerTV Volar Black HD " \ - "(A850)", - .cold_ids = { - &af9015_usb_table[AVERTV_A850], - }, - }, { - .name = "Sveon STV22 Dual USB DVB-T Tuner HDTV", - .cold_ids = { - &af9015_usb_table[SVEON_STV22], - }, - }, - } - }, { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .download_firmware = af9015_download_firmware, - .firmware = "dvb-usb-af9015.fw", - .no_reconnect = 1, - - .size_of_priv = sizeof(struct af9015_state), - - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = { - { - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - - .pid_filter_count = 32, - .pid_filter = af9015_pid_filter, - .pid_filter_ctrl = af9015_pid_filter_ctrl, - - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x84, - }, - } - }, - }, - { - .num_frontends = 1, - .fe = { - { - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x85, - .u = { - .bulk = { - .buffersize = TS_USB20_FRAME_SIZE, - } - } - }, - } - }, - } - }, - - .identify_state = af9015_identify_state, - - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "af9015", - .rc_query = af9015_rc_query, - .rc_interval = AF9015_RC_INTERVAL, - .allowed_protos = RC_TYPE_NEC, - }, - - .i2c_algo = &af9015_i2c_algo, - - .num_device_descs = 9, /* check max from dvb-usb.h */ - .devices = { - { - .name = "AverMedia AVerTV Volar GPS 805 (A805)", - .cold_ids = { - &af9015_usb_table[AVERTV_A805], - }, - }, { - .name = "Conceptronic USB2.0 DVB-T CTVDIGRCU " \ - "V3.0", - .cold_ids = { - &af9015_usb_table[CONCEPTRONIC_CTVDIGRCU], - }, - }, { - .name = "KWorld Digial MC-810", - .cold_ids = { - &af9015_usb_table[KWORLD_MC810], - }, - }, { - .name = "Genius TVGo DVB-T03", - .cold_ids = { - &af9015_usb_table[GENIUS_TVGO_DVB_T03], - }, - }, { - .name = "KWorld PlusTV DVB-T PCI Pro Card " \ - "(DVB-T PC160-T)", - .cold_ids = { - &af9015_usb_table[KWORLD_PC160_T], - }, - }, { - .name = "Sveon STV20 Tuner USB DVB-T HDTV", - .cold_ids = { - &af9015_usb_table[SVEON_STV20], - }, - }, { - .name = "Leadtek WinFast DTV2000DS", - .cold_ids = { - &af9015_usb_table[WINFAST_DTV2000DS], - }, - }, { - .name = "KWorld USB DVB-T Stick Mobile " \ - "(UB383-T)", - .cold_ids = { - &af9015_usb_table[KWORLD_UB383_T], - }, - }, { - .name = "AverMedia AVerTV Volar M (A815Mac)", - .cold_ids = { - &af9015_usb_table[AVERMEDIA_A815M], - }, - }, - } - }, -}; - -static int af9015_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int ret = 0; - struct dvb_usb_device *d = NULL; - struct usb_device *udev = interface_to_usbdev(intf); - u8 i; - - deb_info("%s: interface:%d\n", __func__, - intf->cur_altsetting->desc.bInterfaceNumber); - - /* interface 0 is used by DVB-T receiver and - interface 1 is for remote controller (HID) */ - if (intf->cur_altsetting->desc.bInterfaceNumber == 0) { - ret = af9015_read_config(udev); - if (ret) - return ret; - - for (i = 0; i < af9015_properties_count; i++) { - ret = dvb_usb_device_init(intf, &af9015_properties[i], - THIS_MODULE, &d, adapter_nr); - if (!ret) - break; - if (ret != -ENODEV) - return ret; - } - if (ret) - return ret; - - if (d) - ret = af9015_init(d); - } - - return ret; -} - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver af9015_usb_driver = { - .name = "dvb_usb_af9015", - .probe = af9015_usb_probe, - .disconnect = dvb_usb_device_exit, - .id_table = af9015_usb_table, -}; - -module_usb_driver(af9015_usb_driver); - -MODULE_AUTHOR("Antti Palosaari "); -MODULE_DESCRIPTION("Afatech AF9015 driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c deleted file mode 100644 index 6244fe9d1a3abc269de7112beb9f3440641650e5..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/dvb-usb/it913x.c +++ /dev/null @@ -1,931 +0,0 @@ -/* DVB USB compliant linux driver for IT9137 - * - * Copyright (C) 2011 Malcolm Priestley (tvboxspy@gmail.com) - * IT9137 (C) ITE Tech Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License Version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * see Documentation/dvb/README.dvb-usb for more information - * see Documentation/dvb/it9137.txt for firmware information - * - */ -#define DVB_USB_LOG_PREFIX "it913x" - -#include -#include -#include - -#include "dvb-usb.h" -#include "it913x-fe.h" - -/* debug */ -static int dvb_usb_it913x_debug; -#define l_dprintk(var, level, args...) do { \ - if ((var >= level)) \ - printk(KERN_DEBUG DVB_USB_LOG_PREFIX ": " args); \ -} while (0) - -#define deb_info(level, args...) l_dprintk(dvb_usb_it913x_debug, level, args) -#define debug_data_snipet(level, name, p) \ - deb_info(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \ - *p, *(p+1), *(p+2), *(p+3), *(p+4), \ - *(p+5), *(p+6), *(p+7)); - - -module_param_named(debug, dvb_usb_it913x_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." - DVB_USB_DEBUG_STATUS); - -static int pid_filter; -module_param_named(pid, pid_filter, int, 0644); -MODULE_PARM_DESC(pid, "set default 0=on 1=off"); - -static int dvb_usb_it913x_firmware; -module_param_named(firmware, dvb_usb_it913x_firmware, int, 0644); -MODULE_PARM_DESC(firmware, "set firmware 0=auto 1=IT9137 2=IT9135V1"); - - -int cmd_counter; - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -struct it913x_state { - u8 id; - struct ite_config it913x_config; - u8 pid_filter_onoff; -}; - -struct ite_config it913x_config; - -#define IT913X_RETRY 10 -#define IT913X_SND_TIMEOUT 100 -#define IT913X_RCV_TIMEOUT 200 - -static int it913x_bulk_write(struct usb_device *dev, - u8 *snd, int len, u8 pipe) -{ - int ret, actual_l, i; - - for (i = 0; i < IT913X_RETRY; i++) { - ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe), - snd, len , &actual_l, IT913X_SND_TIMEOUT); - if (ret != -EBUSY && ret != -ETIMEDOUT) - break; - } - - if (len != actual_l && ret == 0) - ret = -EAGAIN; - - return ret; -} - -static int it913x_bulk_read(struct usb_device *dev, - u8 *rev, int len, u8 pipe) -{ - int ret, actual_l, i; - - for (i = 0; i < IT913X_RETRY; i++) { - ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe), - rev, len , &actual_l, IT913X_RCV_TIMEOUT); - if (ret != -EBUSY && ret != -ETIMEDOUT) - break; - } - - if (len != actual_l && ret == 0) - ret = -EAGAIN; - - return ret; -} - -static u16 check_sum(u8 *p, u8 len) -{ - u16 sum = 0; - u8 i = 1; - while (i < len) - sum += (i++ & 1) ? (*p++) << 8 : *p++; - return ~sum; -} - -static int it913x_usb_talk(struct usb_device *udev, u8 mode, u8 pro, - u8 cmd, u32 reg, u8 addr, u8 *data, u8 len) -{ - int ret = 0, i, buf_size = 1; - u8 *buff; - u8 rlen; - u16 chk_sum; - - buff = kzalloc(256, GFP_KERNEL); - if (!buff) { - info("USB Buffer Failed"); - return -ENOMEM; - } - - buff[buf_size++] = pro; - buff[buf_size++] = cmd; - buff[buf_size++] = cmd_counter; - - switch (mode) { - case READ_LONG: - case WRITE_LONG: - buff[buf_size++] = len; - buff[buf_size++] = 2; - buff[buf_size++] = (reg >> 24); - buff[buf_size++] = (reg >> 16) & 0xff; - buff[buf_size++] = (reg >> 8) & 0xff; - buff[buf_size++] = reg & 0xff; - break; - case READ_SHORT: - buff[buf_size++] = addr; - break; - case WRITE_SHORT: - buff[buf_size++] = len; - buff[buf_size++] = addr; - buff[buf_size++] = (reg >> 8) & 0xff; - buff[buf_size++] = reg & 0xff; - break; - case READ_DATA: - case WRITE_DATA: - break; - case WRITE_CMD: - mode = 7; - break; - default: - kfree(buff); - return -EINVAL; - } - - if (mode & 1) { - for (i = 0; i < len ; i++) - buff[buf_size++] = data[i]; - } - chk_sum = check_sum(&buff[1], buf_size); - - buff[buf_size++] = chk_sum >> 8; - buff[0] = buf_size; - buff[buf_size++] = (chk_sum & 0xff); - - ret = it913x_bulk_write(udev, buff, buf_size , 0x02); - if (ret < 0) - goto error; - - ret = it913x_bulk_read(udev, buff, (mode & 1) ? - 5 : len + 5 , 0x01); - if (ret < 0) - goto error; - - rlen = (mode & 0x1) ? 0x1 : len; - - if (mode & 1) - ret = buff[2]; - else - memcpy(data, &buff[3], rlen); - - cmd_counter++; - -error: kfree(buff); - - return ret; -} - -static int it913x_io(struct usb_device *udev, u8 mode, u8 pro, - u8 cmd, u32 reg, u8 addr, u8 *data, u8 len) -{ - int ret, i; - - for (i = 0; i < IT913X_RETRY; i++) { - ret = it913x_usb_talk(udev, mode, pro, - cmd, reg, addr, data, len); - if (ret != -EAGAIN) - break; - } - - return ret; -} - -static int it913x_wr_reg(struct usb_device *udev, u8 pro, u32 reg , u8 data) -{ - int ret; - u8 b[1]; - b[0] = data; - ret = it913x_io(udev, WRITE_LONG, pro, - CMD_DEMOD_WRITE, reg, 0, b, sizeof(b)); - - return ret; -} - -static int it913x_read_reg(struct usb_device *udev, u32 reg) -{ - int ret; - u8 data[1]; - - ret = it913x_io(udev, READ_LONG, DEV_0, - CMD_DEMOD_READ, reg, 0, &data[0], 1); - - return (ret < 0) ? ret : data[0]; -} - -static u32 it913x_query(struct usb_device *udev, u8 pro) -{ - int ret, i; - u8 data[4]; - u8 ver; - - for (i = 0; i < 5; i++) { - ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ, - 0x1222, 0, &data[0], 3); - ver = data[0]; - if (ver > 0 && ver < 3) - break; - msleep(100); - } - - if (ver < 1 || ver > 2) { - info("Failed to identify chip version applying 1"); - it913x_config.chip_ver = 0x1; - it913x_config.chip_type = 0x9135; - return 0; - } - - it913x_config.chip_ver = ver; - it913x_config.chip_type = (u16)(data[2] << 8) + data[1]; - - info("Chip Version=%02x Chip Type=%04x", it913x_config.chip_ver, - it913x_config.chip_type); - - ret |= it913x_io(udev, READ_SHORT, pro, - CMD_QUERYINFO, 0, 0x1, &data[0], 4); - - it913x_config.firmware = (data[0] << 24) + (data[1] << 16) + - (data[2] << 8) + data[3]; - - return (ret < 0) ? 0 : it913x_config.firmware; -} - -static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - struct it913x_state *st = adap->dev->priv; - struct usb_device *udev = adap->dev->udev; - int ret; - u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; - - mutex_lock(&adap->dev->i2c_mutex); - - deb_info(1, "PID_C (%02x)", onoff); - - ret = it913x_wr_reg(udev, pro, PID_EN, st->pid_filter_onoff); - - mutex_unlock(&adap->dev->i2c_mutex); - return ret; -} - -static int it913x_pid_filter(struct dvb_usb_adapter *adap, - int index, u16 pid, int onoff) -{ - struct it913x_state *st = adap->dev->priv; - struct usb_device *udev = adap->dev->udev; - int ret; - u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; - - mutex_lock(&adap->dev->i2c_mutex); - - deb_info(1, "PID_F (%02x)", onoff); - - ret = it913x_wr_reg(udev, pro, PID_LSB, (u8)(pid & 0xff)); - - ret |= it913x_wr_reg(udev, pro, PID_MSB, (u8)(pid >> 8)); - - ret |= it913x_wr_reg(udev, pro, PID_INX_EN, (u8)onoff); - - ret |= it913x_wr_reg(udev, pro, PID_INX, (u8)(index & 0x1f)); - - if (udev->speed == USB_SPEED_HIGH && pid == 0x2000) { - ret |= it913x_wr_reg(udev, pro, PID_EN, !onoff); - st->pid_filter_onoff = !onoff; - } else - st->pid_filter_onoff = - adap->fe_adap[adap->active_fe].pid_filtering; - - mutex_unlock(&adap->dev->i2c_mutex); - return 0; -} - - -static int it913x_return_status(struct usb_device *udev) -{ - u32 firm = 0; - - firm = it913x_query(udev, DEV_0); - if (firm > 0) - info("Firmware Version %d", firm); - - return (firm > 0) ? firm : 0; -} - -static int it913x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - static u8 data[256]; - int ret; - u32 reg; - u8 pro; - - mutex_lock(&d->i2c_mutex); - - debug_data_snipet(1, "Message out", msg[0].buf); - deb_info(2, "num of messages %d address %02x", num, msg[0].addr); - - pro = (msg[0].addr & 0x2) ? DEV_0_DMOD : 0x0; - pro |= (msg[0].addr & 0x20) ? DEV_1 : DEV_0; - memcpy(data, msg[0].buf, msg[0].len); - reg = (data[0] << 24) + (data[1] << 16) + - (data[2] << 8) + data[3]; - if (num == 2) { - ret = it913x_io(d->udev, READ_LONG, pro, - CMD_DEMOD_READ, reg, 0, data, msg[1].len); - memcpy(msg[1].buf, data, msg[1].len); - } else - ret = it913x_io(d->udev, WRITE_LONG, pro, CMD_DEMOD_WRITE, - reg, 0, &data[4], msg[0].len - 4); - - mutex_unlock(&d->i2c_mutex); - - return ret; -} - -static u32 it913x_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm it913x_i2c_algo = { - .master_xfer = it913x_i2c_xfer, - .functionality = it913x_i2c_func, -}; - -/* Callbacks for DVB USB */ -#define IT913X_POLL 250 -static int it913x_rc_query(struct dvb_usb_device *d) -{ - u8 ibuf[4]; - int ret; - u32 key; - /* Avoid conflict with frontends*/ - mutex_lock(&d->i2c_mutex); - - ret = it913x_io(d->udev, READ_LONG, PRO_LINK, CMD_IR_GET, - 0, 0, &ibuf[0], sizeof(ibuf)); - - if ((ibuf[2] + ibuf[3]) == 0xff) { - key = ibuf[2]; - key += ibuf[0] << 16; - key += ibuf[1] << 8; - deb_info(1, "NEC Extended Key =%08x", key); - if (d->rc_dev != NULL) - rc_keydown(d->rc_dev, key, 0); - } - - mutex_unlock(&d->i2c_mutex); - - return ret; -} - -/* Firmware sets raw */ -const char fw_it9135_v1[] = "dvb-usb-it9135-01.fw"; -const char fw_it9135_v2[] = "dvb-usb-it9135-02.fw"; -const char fw_it9137[] = "dvb-usb-it9137-01.fw"; - -static int ite_firmware_select(struct usb_device *udev, - struct dvb_usb_device_properties *props) -{ - int sw; - /* auto switch */ - if (le16_to_cpu(udev->descriptor.idVendor) == USB_VID_KWORLD_2) - sw = IT9137_FW; - else if (it913x_config.chip_ver == 1) - sw = IT9135_V1_FW; - else - sw = IT9135_V2_FW; - - /* force switch */ - if (dvb_usb_it913x_firmware != IT9135_AUTO) - sw = dvb_usb_it913x_firmware; - - switch (sw) { - case IT9135_V1_FW: - it913x_config.firmware_ver = 1; - it913x_config.adc_x2 = 1; - it913x_config.read_slevel = false; - props->firmware = fw_it9135_v1; - break; - case IT9135_V2_FW: - it913x_config.firmware_ver = 1; - it913x_config.adc_x2 = 1; - it913x_config.read_slevel = false; - props->firmware = fw_it9135_v2; - switch (it913x_config.tuner_id_0) { - case IT9135_61: - case IT9135_62: - break; - default: - info("Unknown tuner ID applying default 0x60"); - case IT9135_60: - it913x_config.tuner_id_0 = IT9135_60; - } - break; - case IT9137_FW: - default: - it913x_config.firmware_ver = 0; - it913x_config.adc_x2 = 0; - it913x_config.read_slevel = true; - props->firmware = fw_it9137; - } - - return 0; -} - -static void it913x_select_remote(struct usb_device *udev, - struct dvb_usb_device_properties *props) -{ - switch (le16_to_cpu(udev->descriptor.idProduct)) { - case USB_PID_ITETECH_IT9135_9005: - props->rc.core.rc_codes = RC_MAP_IT913X_V2; - return; - default: - props->rc.core.rc_codes = RC_MAP_IT913X_V1; - } - return; -} - -#define TS_MPEG_PKT_SIZE 188 -#define EP_LOW 21 -#define TS_BUFFER_SIZE_PID (EP_LOW*TS_MPEG_PKT_SIZE) -#define EP_HIGH 348 -#define TS_BUFFER_SIZE_MAX (EP_HIGH*TS_MPEG_PKT_SIZE) - -static int it913x_select_config(struct usb_device *udev, - struct dvb_usb_device_properties *props) -{ - int ret = 0, reg; - bool proprietary_ir = false; - - if (it913x_config.chip_ver == 0x02 - && it913x_config.chip_type == 0x9135) - reg = it913x_read_reg(udev, 0x461d); - else - reg = it913x_read_reg(udev, 0x461b); - - if (reg < 0) - return reg; - - if (reg == 0) { - it913x_config.dual_mode = 0; - it913x_config.tuner_id_0 = IT9135_38; - proprietary_ir = true; - } else { - /* TS mode */ - reg = it913x_read_reg(udev, 0x49c5); - if (reg < 0) - return reg; - it913x_config.dual_mode = reg; - - /* IR mode type */ - reg = it913x_read_reg(udev, 0x49ac); - if (reg < 0) - return reg; - if (reg == 5) { - info("Remote propriety (raw) mode"); - proprietary_ir = true; - } else if (reg == 1) { - info("Remote HID mode NOT SUPPORTED"); - proprietary_ir = false; - props->rc.core.rc_codes = NULL; - } else - props->rc.core.rc_codes = NULL; - - /* Tuner_id */ - reg = it913x_read_reg(udev, 0x49d0); - if (reg < 0) - return reg; - it913x_config.tuner_id_0 = reg; - } - - if (proprietary_ir) - it913x_select_remote(udev, props); - - if (udev->speed != USB_SPEED_HIGH) { - props->adapter[0].fe[0].pid_filter_count = 5; - info("USB 1 low speed mode - connect to USB 2 port"); - if (pid_filter > 0) - pid_filter = 0; - if (it913x_config.dual_mode) { - it913x_config.dual_mode = 0; - info("Dual mode not supported in USB 1"); - } - } else /* For replugging */ - if(props->adapter[0].fe[0].pid_filter_count == 5) - props->adapter[0].fe[0].pid_filter_count = 31; - - /* Select Stream Buffer Size and pid filter option*/ - if (pid_filter) { - props->adapter[0].fe[0].stream.u.bulk.buffersize = - TS_BUFFER_SIZE_MAX; - props->adapter[0].fe[0].caps &= - ~DVB_USB_ADAP_NEED_PID_FILTERING; - } else - props->adapter[0].fe[0].stream.u.bulk.buffersize = - TS_BUFFER_SIZE_PID; - - if (it913x_config.dual_mode) { - props->adapter[1].fe[0].stream.u.bulk.buffersize = - props->adapter[0].fe[0].stream.u.bulk.buffersize; - props->num_adapters = 2; - if (pid_filter) - props->adapter[1].fe[0].caps = - props->adapter[0].fe[0].caps; - } else - props->num_adapters = 1; - - info("Dual mode=%x Tuner Type=%x", it913x_config.dual_mode, - it913x_config.tuner_id_0); - - ret = ite_firmware_select(udev, props); - - return ret; -} - -static int it913x_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - int ret = 0, firm_no; - u8 reg; - - firm_no = it913x_return_status(udev); - - /* Read and select config */ - ret = it913x_select_config(udev, props); - if (ret < 0) - return ret; - - if (firm_no > 0) { - *cold = 0; - return 0; - } - - if (it913x_config.dual_mode) { - it913x_config.tuner_id_1 = it913x_read_reg(udev, 0x49e0); - ret = it913x_wr_reg(udev, DEV_0, GPIOH1_EN, 0x1); - ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_ON, 0x1); - ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x1); - msleep(50); - ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x0); - msleep(50); - reg = it913x_read_reg(udev, GPIOH1_O); - if (reg == 0) { - ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x1); - ret |= it913x_return_status(udev); - if (ret != 0) - ret = it913x_wr_reg(udev, DEV_0, - GPIOH1_O, 0x0); - } - } - - reg = it913x_read_reg(udev, IO_MUX_POWER_CLK); - - if (it913x_config.dual_mode) { - ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, CHIP2_I2C_ADDR); - if (it913x_config.firmware_ver == 1) - ret |= it913x_wr_reg(udev, DEV_0, 0xcfff, 0x1); - else - ret |= it913x_wr_reg(udev, DEV_0, CLK_O_EN, 0x1); - } else { - ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, 0x0); - if (it913x_config.firmware_ver == 1) - ret |= it913x_wr_reg(udev, DEV_0, 0xcfff, 0x0); - else - ret |= it913x_wr_reg(udev, DEV_0, CLK_O_EN, 0x0); - } - - *cold = 1; - - return (ret < 0) ? -ENODEV : 0; -} - -static int it913x_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - struct it913x_state *st = adap->dev->priv; - int ret = 0; - u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; - - deb_info(1, "STM (%02x)", onoff); - - if (!onoff) { - mutex_lock(&adap->dev->i2c_mutex); - - ret = it913x_wr_reg(adap->dev->udev, pro, PID_RST, 0x1); - - mutex_unlock(&adap->dev->i2c_mutex); - st->pid_filter_onoff = - adap->fe_adap[adap->active_fe].pid_filtering; - - } - - return ret; -} - -static int it913x_download_firmware(struct usb_device *udev, - const struct firmware *fw) -{ - int ret = 0, i = 0, pos = 0; - u8 packet_size, min_pkt; - u8 *fw_data; - - ret = it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_100); - - info("FRM Starting Firmware Download"); - - /* Multi firmware loader */ - /* This uses scatter write firmware headers */ - /* The firmware must start with 03 XX 00 */ - /* and be the extact firmware length */ - - if (it913x_config.chip_ver == 2) - min_pkt = 0x11; - else - min_pkt = 0x19; - - while (i <= fw->size) { - if (((fw->data[i] == 0x3) && (fw->data[i + 2] == 0x0)) - || (i == fw->size)) { - packet_size = i - pos; - if ((packet_size > min_pkt) || (i == fw->size)) { - fw_data = (u8 *)(fw->data + pos); - pos += packet_size; - if (packet_size > 0) { - ret = it913x_io(udev, WRITE_DATA, - DEV_0, CMD_SCATTER_WRITE, 0, - 0, fw_data, packet_size); - if (ret < 0) - break; - } - udelay(1000); - } - } - i++; - } - - if (ret < 0) - info("FRM Firmware Download Failed (%d)" , ret); - else - info("FRM Firmware Download Completed - Resetting Device"); - - msleep(30); - - ret = it913x_io(udev, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0); - if (ret < 0) - info("FRM Device not responding to reboot"); - - ret = it913x_return_status(udev); - if (ret == 0) { - info("FRM Failed to reboot device"); - return -ENODEV; - } - - msleep(30); - - ret = it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_400); - - msleep(30); - - /* Tuner function */ - if (it913x_config.dual_mode) - ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0xa0); - else - ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0x68); - - if ((it913x_config.chip_ver == 1) && - (it913x_config.chip_type == 0x9135)) { - ret |= it913x_wr_reg(udev, DEV_0, PADODPU, 0x0); - ret |= it913x_wr_reg(udev, DEV_0, AGC_O_D, 0x0); - if (it913x_config.dual_mode) { - ret |= it913x_wr_reg(udev, DEV_1, PADODPU, 0x0); - ret |= it913x_wr_reg(udev, DEV_1, AGC_O_D, 0x0); - } - } - - return (ret < 0) ? -ENODEV : 0; -} - -static int it913x_name(struct dvb_usb_adapter *adap) -{ - const char *desc = adap->dev->desc->name; - char *fe_name[] = {"_1", "_2", "_3", "_4"}; - char *name = adap->fe_adap[0].fe->ops.info.name; - - strlcpy(name, desc, 128); - strlcat(name, fe_name[adap->id], 128); - - return 0; -} - -static int it913x_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct usb_device *udev = adap->dev->udev; - struct it913x_state *st = adap->dev->priv; - int ret = 0; - u8 adap_addr = I2C_BASE_ADDR + (adap->id << 5); - u16 ep_size = adap->props.fe[0].stream.u.bulk.buffersize / 4; - u8 pkt_size = 0x80; - - if (adap->dev->udev->speed != USB_SPEED_HIGH) - pkt_size = 0x10; - - it913x_config.adf = it913x_read_reg(udev, IO_MUX_POWER_CLK); - - if (adap->id == 0) - memcpy(&st->it913x_config, &it913x_config, - sizeof(struct ite_config)); - - adap->fe_adap[0].fe = dvb_attach(it913x_fe_attach, - &adap->dev->i2c_adap, adap_addr, &st->it913x_config); - - if (adap->id == 0 && adap->fe_adap[0].fe) { - ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2_SW_RST, 0x1); - ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_SW_RST, 0x1); - ret = it913x_wr_reg(udev, DEV_0, EP0_TX_EN, 0x0f); - ret = it913x_wr_reg(udev, DEV_0, EP0_TX_NAK, 0x1b); - ret = it913x_wr_reg(udev, DEV_0, EP0_TX_EN, 0x2f); - ret = it913x_wr_reg(udev, DEV_0, EP4_TX_LEN_LSB, - ep_size & 0xff); - ret = it913x_wr_reg(udev, DEV_0, EP4_TX_LEN_MSB, ep_size >> 8); - ret = it913x_wr_reg(udev, DEV_0, EP4_MAX_PKT, pkt_size); - } else if (adap->id == 1 && adap->fe_adap[0].fe) { - ret = it913x_wr_reg(udev, DEV_0, EP0_TX_EN, 0x6f); - ret = it913x_wr_reg(udev, DEV_0, EP5_TX_LEN_LSB, - ep_size & 0xff); - ret = it913x_wr_reg(udev, DEV_0, EP5_TX_LEN_MSB, ep_size >> 8); - ret = it913x_wr_reg(udev, DEV_0, EP5_MAX_PKT, pkt_size); - ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_EN, 0x1); - ret = it913x_wr_reg(udev, DEV_1_DMOD, MP2IF_SERIAL, 0x1); - ret = it913x_wr_reg(udev, DEV_1, TOP_HOSTB_SER_MODE, 0x1); - ret = it913x_wr_reg(udev, DEV_0_DMOD, TSIS_ENABLE, 0x1); - ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2_SW_RST, 0x0); - ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_SW_RST, 0x0); - ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_HALF_PSB, 0x0); - ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF_STOP_EN, 0x1); - ret = it913x_wr_reg(udev, DEV_1_DMOD, MPEG_FULL_SPEED, 0x0); - ret = it913x_wr_reg(udev, DEV_1_DMOD, MP2IF_STOP_EN, 0x0); - } else - return -ENODEV; - - ret = it913x_name(adap); - - return ret; -} - -/* DVB USB Driver */ -static struct dvb_usb_device_properties it913x_properties; - -static int it913x_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - cmd_counter = 0; - if (0 == dvb_usb_device_init(intf, &it913x_properties, - THIS_MODULE, NULL, adapter_nr)) { - info("DEV registering device driver"); - return 0; - } - - info("DEV it913x Error"); - return -ENODEV; - -} - -static struct usb_device_id it913x_table[] = { - { USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09) }, - { USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135) }, - { USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22_IT9137) }, - { USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9005) }, - { USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006) }, - {} /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, it913x_table); - -static struct dvb_usb_device_properties it913x_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = DEVICE_SPECIFIC, - .download_firmware = it913x_download_firmware, - .firmware = "dvb-usb-it9137-01.fw", - .no_reconnect = 1, - .size_of_priv = sizeof(struct it913x_state), - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER| - DVB_USB_ADAP_NEED_PID_FILTERING| - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .streaming_ctrl = it913x_streaming_ctrl, - .pid_filter_count = 31, - .pid_filter = it913x_pid_filter, - .pid_filter_ctrl = it913x_pid_filter_ctrl, - .frontend_attach = it913x_frontend_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 10, - .endpoint = 0x04, - .u = {/* Keep Low if PID filter on */ - .bulk = { - .buffersize = - TS_BUFFER_SIZE_PID, - } - } - } - }}, - }, - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER| - DVB_USB_ADAP_NEED_PID_FILTERING| - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .streaming_ctrl = it913x_streaming_ctrl, - .pid_filter_count = 31, - .pid_filter = it913x_pid_filter, - .pid_filter_ctrl = it913x_pid_filter_ctrl, - .frontend_attach = it913x_frontend_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x05, - .u = { - .bulk = { - .buffersize = - TS_BUFFER_SIZE_PID, - } - } - } - }}, - } - }, - .identify_state = it913x_identify_state, - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "it913x", - .rc_query = it913x_rc_query, - .rc_interval = IT913X_POLL, - .allowed_protos = RC_TYPE_NEC, - .rc_codes = RC_MAP_IT913X_V1, - }, - .i2c_algo = &it913x_i2c_algo, - .num_device_descs = 5, - .devices = { - { "Kworld UB499-2T T09(IT9137)", - { &it913x_table[0], NULL }, - }, - { "ITE 9135 Generic", - { &it913x_table[1], NULL }, - }, - { "Sveon STV22 Dual DVB-T HDTV(IT9137)", - { &it913x_table[2], NULL }, - }, - { "ITE 9135(9005) Generic", - { &it913x_table[3], NULL }, - }, - { "ITE 9135(9006) Generic", - { &it913x_table[4], NULL }, - }, - } -}; - -static struct usb_driver it913x_driver = { - .name = "it913x", - .probe = it913x_probe, - .disconnect = dvb_usb_device_exit, - .id_table = it913x_table, -}; - -module_usb_driver(it913x_driver); - -MODULE_AUTHOR("Malcolm Priestley "); -MODULE_DESCRIPTION("it913x USB 2 Driver"); -MODULE_VERSION("1.28"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.c b/drivers/media/dvb/dvb-usb/mxl111sf.c deleted file mode 100644 index cd842798f5afefebd51114b2382242e882b63481..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/dvb-usb/mxl111sf.c +++ /dev/null @@ -1,1835 +0,0 @@ -/* - * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ - -#include -#include - -#include "mxl111sf.h" -#include "mxl111sf-reg.h" -#include "mxl111sf-phy.h" -#include "mxl111sf-i2c.h" -#include "mxl111sf-gpio.h" - -#include "mxl111sf-demod.h" -#include "mxl111sf-tuner.h" - -#include "lgdt3305.h" -#include "lg2160.h" - -int dvb_usb_mxl111sf_debug; -module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level " - "(1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able))."); - -int dvb_usb_mxl111sf_isoc; -module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, 0644); -MODULE_PARM_DESC(isoc, "enable usb isoc xfer (0=bulk, 1=isoc)."); - -int dvb_usb_mxl111sf_spi; -module_param_named(spi, dvb_usb_mxl111sf_spi, int, 0644); -MODULE_PARM_DESC(spi, "use spi rather than tp for data xfer (0=tp, 1=spi)."); - -#define ANT_PATH_AUTO 0 -#define ANT_PATH_EXTERNAL 1 -#define ANT_PATH_INTERNAL 2 - -int dvb_usb_mxl111sf_rfswitch = -#if 0 - ANT_PATH_AUTO; -#else - ANT_PATH_EXTERNAL; -#endif - -module_param_named(rfswitch, dvb_usb_mxl111sf_rfswitch, int, 0644); -MODULE_PARM_DESC(rfswitch, "force rf switch position (0=auto, 1=ext, 2=int)."); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define deb_info(args...) dprintk(dvb_usb_mxl111sf_debug, 0x13, args) -#define deb_reg(args...) dprintk(dvb_usb_mxl111sf_debug, 0x08, args) -#define deb_adv(args...) dprintk(dvb_usb_mxl111sf_debug, MXL_ADV_DBG, args) - -int mxl111sf_ctrl_msg(struct dvb_usb_device *d, - u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) -{ - int wo = (rbuf == NULL || rlen == 0); /* write-only */ - int ret; - u8 sndbuf[1+wlen]; - - deb_adv("%s(wlen = %d, rlen = %d)\n", __func__, wlen, rlen); - - memset(sndbuf, 0, 1+wlen); - - sndbuf[0] = cmd; - memcpy(&sndbuf[1], wbuf, wlen); - - ret = (wo) ? dvb_usb_generic_write(d, sndbuf, 1+wlen) : - dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0); - mxl_fail(ret); - - return ret; -} - -/* ------------------------------------------------------------------------ */ - -#define MXL_CMD_REG_READ 0xaa -#define MXL_CMD_REG_WRITE 0x55 - -int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data) -{ - u8 buf[2]; - int ret; - - ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_READ, &addr, 1, buf, 2); - if (mxl_fail(ret)) { - mxl_debug("error reading reg: 0x%02x", addr); - goto fail; - } - - if (buf[0] == addr) - *data = buf[1]; - else { - err("invalid response reading reg: 0x%02x != 0x%02x, 0x%02x", - addr, buf[0], buf[1]); - ret = -EINVAL; - } - - deb_reg("R: (0x%02x, 0x%02x)\n", addr, *data); -fail: - return ret; -} - -int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data) -{ - u8 buf[] = { addr, data }; - int ret; - - deb_reg("W: (0x%02x, 0x%02x)\n", addr, data); - - ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_WRITE, buf, 2, NULL, 0); - if (mxl_fail(ret)) - err("error writing reg: 0x%02x, val: 0x%02x", addr, data); - return ret; -} - -/* ------------------------------------------------------------------------ */ - -int mxl111sf_write_reg_mask(struct mxl111sf_state *state, - u8 addr, u8 mask, u8 data) -{ - int ret; - u8 val; - - if (mask != 0xff) { - ret = mxl111sf_read_reg(state, addr, &val); -#if 1 - /* dont know why this usually errors out on the first try */ - if (mxl_fail(ret)) - err("error writing addr: 0x%02x, mask: 0x%02x, " - "data: 0x%02x, retrying...", addr, mask, data); - - ret = mxl111sf_read_reg(state, addr, &val); -#endif - if (mxl_fail(ret)) - goto fail; - } - val &= ~mask; - val |= data; - - ret = mxl111sf_write_reg(state, addr, val); - mxl_fail(ret); -fail: - return ret; -} - -/* ------------------------------------------------------------------------ */ - -int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state, - struct mxl111sf_reg_ctrl_info *ctrl_reg_info) -{ - int i, ret = 0; - - for (i = 0; ctrl_reg_info[i].addr | - ctrl_reg_info[i].mask | - ctrl_reg_info[i].data; i++) { - - ret = mxl111sf_write_reg_mask(state, - ctrl_reg_info[i].addr, - ctrl_reg_info[i].mask, - ctrl_reg_info[i].data); - if (mxl_fail(ret)) { - err("failed on reg #%d (0x%02x)", i, - ctrl_reg_info[i].addr); - break; - } - } - return ret; -} - -/* ------------------------------------------------------------------------ */ - -static int mxl1x1sf_get_chip_info(struct mxl111sf_state *state) -{ - int ret; - u8 id, ver; - char *mxl_chip, *mxl_rev; - - if ((state->chip_id) && (state->chip_ver)) - return 0; - - ret = mxl111sf_read_reg(state, CHIP_ID_REG, &id); - if (mxl_fail(ret)) - goto fail; - state->chip_id = id; - - ret = mxl111sf_read_reg(state, TOP_CHIP_REV_ID_REG, &ver); - if (mxl_fail(ret)) - goto fail; - state->chip_ver = ver; - - switch (id) { - case 0x61: - mxl_chip = "MxL101SF"; - break; - case 0x63: - mxl_chip = "MxL111SF"; - break; - default: - mxl_chip = "UNKNOWN MxL1X1"; - break; - } - switch (ver) { - case 0x36: - state->chip_rev = MXL111SF_V6; - mxl_rev = "v6"; - break; - case 0x08: - state->chip_rev = MXL111SF_V8_100; - mxl_rev = "v8_100"; - break; - case 0x18: - state->chip_rev = MXL111SF_V8_200; - mxl_rev = "v8_200"; - break; - default: - state->chip_rev = 0; - mxl_rev = "UNKNOWN REVISION"; - break; - } - info("%s detected, %s (0x%x)", mxl_chip, mxl_rev, ver); -fail: - return ret; -} - -#define get_chip_info(state) \ -({ \ - int ___ret; \ - ___ret = mxl1x1sf_get_chip_info(state); \ - if (mxl_fail(___ret)) { \ - mxl_debug("failed to get chip info" \ - " on first probe attempt"); \ - ___ret = mxl1x1sf_get_chip_info(state); \ - if (mxl_fail(___ret)) \ - err("failed to get chip info during probe"); \ - else \ - mxl_debug("probe needed a retry " \ - "in order to succeed."); \ - } \ - ___ret; \ -}) - -/* ------------------------------------------------------------------------ */ - -static int mxl111sf_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - /* power control depends on which adapter is being woken: - * save this for init, instead, via mxl111sf_adap_fe_init */ - return 0; -} - -static int mxl111sf_adap_fe_init(struct dvb_frontend *fe) -{ - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dvb_usb_device *d = adap->dev; - struct mxl111sf_state *state = d->priv; - struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe->id].priv; - - int err; - - /* exit if we didnt initialize the driver yet */ - if (!state->chip_id) { - mxl_debug("driver not yet initialized, exit."); - goto fail; - } - - deb_info("%s()\n", __func__); - - mutex_lock(&state->fe_lock); - - state->alt_mode = adap_state->alt_mode; - - if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0) - err("set interface failed"); - - err = mxl1x1sf_soft_reset(state); - mxl_fail(err); - err = mxl111sf_init_tuner_demod(state); - mxl_fail(err); - err = mxl1x1sf_set_device_mode(state, adap_state->device_mode); - - mxl_fail(err); - mxl111sf_enable_usb_output(state); - mxl_fail(err); - mxl1x1sf_top_master_ctrl(state, 1); - mxl_fail(err); - - if ((MXL111SF_GPIO_MOD_DVBT != adap_state->gpio_mode) && - (state->chip_rev > MXL111SF_V6)) { - mxl111sf_config_pin_mux_modes(state, - PIN_MUX_TS_SPI_IN_MODE_1); - mxl_fail(err); - } - err = mxl111sf_init_port_expander(state); - if (!mxl_fail(err)) { - state->gpio_mode = adap_state->gpio_mode; - err = mxl111sf_gpio_mode_switch(state, state->gpio_mode); - mxl_fail(err); -#if 0 - err = fe->ops.init(fe); -#endif - msleep(100); /* add short delay after enabling - * the demod before touching it */ - } - - return (adap_state->fe_init) ? adap_state->fe_init(fe) : 0; -fail: - return -ENODEV; -} - -static int mxl111sf_adap_fe_sleep(struct dvb_frontend *fe) -{ - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dvb_usb_device *d = adap->dev; - struct mxl111sf_state *state = d->priv; - struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe->id].priv; - int err; - - /* exit if we didnt initialize the driver yet */ - if (!state->chip_id) { - mxl_debug("driver not yet initialized, exit."); - goto fail; - } - - deb_info("%s()\n", __func__); - - err = (adap_state->fe_sleep) ? adap_state->fe_sleep(fe) : 0; - - mutex_unlock(&state->fe_lock); - - return err; -fail: - return -ENODEV; -} - - -static int mxl111sf_ep6_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - struct dvb_usb_device *d = adap->dev; - struct mxl111sf_state *state = d->priv; - struct mxl111sf_adap_state *adap_state = adap->fe_adap[adap->active_fe].priv; - int ret = 0; - - deb_info("%s(%d)\n", __func__, onoff); - - if (onoff) { - ret = mxl111sf_enable_usb_output(state); - mxl_fail(ret); - ret = mxl111sf_config_mpeg_in(state, 1, 1, - adap_state->ep6_clockphase, - 0, 0); - mxl_fail(ret); -#if 0 - } else { - ret = mxl111sf_disable_656_port(state); - mxl_fail(ret); -#endif - } - - return ret; -} - -static int mxl111sf_ep5_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - struct dvb_usb_device *d = adap->dev; - struct mxl111sf_state *state = d->priv; - int ret = 0; - - deb_info("%s(%d)\n", __func__, onoff); - - if (onoff) { - ret = mxl111sf_enable_usb_output(state); - mxl_fail(ret); - - ret = mxl111sf_init_i2s_port(state, 200); - mxl_fail(ret); - ret = mxl111sf_config_i2s(state, 0, 15); - mxl_fail(ret); - } else { - ret = mxl111sf_disable_i2s_port(state); - mxl_fail(ret); - } - if (state->chip_rev > MXL111SF_V6) - ret = mxl111sf_config_spi(state, onoff); - mxl_fail(ret); - - return ret; -} - -static int mxl111sf_ep4_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - struct dvb_usb_device *d = adap->dev; - struct mxl111sf_state *state = d->priv; - int ret = 0; - - deb_info("%s(%d)\n", __func__, onoff); - - if (onoff) { - ret = mxl111sf_enable_usb_output(state); - mxl_fail(ret); - } - - return ret; -} - -/* ------------------------------------------------------------------------ */ - -static struct lgdt3305_config hauppauge_lgdt3305_config = { - .i2c_addr = 0xb2 >> 1, - .mpeg_mode = LGDT3305_MPEG_SERIAL, - .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE, - .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, - .deny_i2c_rptr = 1, - .spectral_inversion = 0, - .qam_if_khz = 6000, - .vsb_if_khz = 6000, -}; - -static int mxl111sf_lgdt3305_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap->dev; - struct mxl111sf_state *state = d->priv; - int fe_id = adap->num_frontends_initialized; - struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv; - int ret; - - deb_adv("%s()\n", __func__); - - /* save a pointer to the dvb_usb_device in device state */ - state->d = d; - adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; - state->alt_mode = adap_state->alt_mode; - - if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0) - err("set interface failed"); - - state->gpio_mode = MXL111SF_GPIO_MOD_ATSC; - adap_state->gpio_mode = state->gpio_mode; - adap_state->device_mode = MXL_TUNER_MODE; - adap_state->ep6_clockphase = 1; - - ret = mxl1x1sf_soft_reset(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_init_tuner_demod(state); - if (mxl_fail(ret)) - goto fail; - - ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_enable_usb_output(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_top_master_ctrl(state, 1); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_init_port_expander(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); - if (mxl_fail(ret)) - goto fail; - - adap->fe_adap[fe_id].fe = dvb_attach(lgdt3305_attach, - &hauppauge_lgdt3305_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[fe_id].fe) { - adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init; - adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init; - adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep; - adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep; - return 0; - } - ret = -EIO; -fail: - return ret; -} - -static struct lg2160_config hauppauge_lg2160_config = { - .lg_chip = LG2160, - .i2c_addr = 0x1c >> 1, - .deny_i2c_rptr = 1, - .spectral_inversion = 0, - .if_khz = 6000, -}; - -static int mxl111sf_lg2160_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap->dev; - struct mxl111sf_state *state = d->priv; - int fe_id = adap->num_frontends_initialized; - struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv; - int ret; - - deb_adv("%s()\n", __func__); - - /* save a pointer to the dvb_usb_device in device state */ - state->d = d; - adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; - state->alt_mode = adap_state->alt_mode; - - if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0) - err("set interface failed"); - - state->gpio_mode = MXL111SF_GPIO_MOD_MH; - adap_state->gpio_mode = state->gpio_mode; - adap_state->device_mode = MXL_TUNER_MODE; - adap_state->ep6_clockphase = 1; - - ret = mxl1x1sf_soft_reset(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_init_tuner_demod(state); - if (mxl_fail(ret)) - goto fail; - - ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_enable_usb_output(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_top_master_ctrl(state, 1); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_init_port_expander(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); - if (mxl_fail(ret)) - goto fail; - - ret = get_chip_info(state); - if (mxl_fail(ret)) - goto fail; - - adap->fe_adap[fe_id].fe = dvb_attach(lg2160_attach, - &hauppauge_lg2160_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[fe_id].fe) { - adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init; - adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init; - adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep; - adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep; - return 0; - } - ret = -EIO; -fail: - return ret; -} - -static struct lg2160_config hauppauge_lg2161_1019_config = { - .lg_chip = LG2161_1019, - .i2c_addr = 0x1c >> 1, - .deny_i2c_rptr = 1, - .spectral_inversion = 0, - .if_khz = 6000, - .output_if = 2, /* LG2161_OIF_SPI_MAS */ -}; - -static struct lg2160_config hauppauge_lg2161_1040_config = { - .lg_chip = LG2161_1040, - .i2c_addr = 0x1c >> 1, - .deny_i2c_rptr = 1, - .spectral_inversion = 0, - .if_khz = 6000, - .output_if = 4, /* LG2161_OIF_SPI_MAS */ -}; - -static int mxl111sf_lg2161_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap->dev; - struct mxl111sf_state *state = d->priv; - int fe_id = adap->num_frontends_initialized; - struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv; - int ret; - - deb_adv("%s()\n", __func__); - - /* save a pointer to the dvb_usb_device in device state */ - state->d = d; - adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; - state->alt_mode = adap_state->alt_mode; - - if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0) - err("set interface failed"); - - state->gpio_mode = MXL111SF_GPIO_MOD_MH; - adap_state->gpio_mode = state->gpio_mode; - adap_state->device_mode = MXL_TUNER_MODE; - adap_state->ep6_clockphase = 1; - - ret = mxl1x1sf_soft_reset(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_init_tuner_demod(state); - if (mxl_fail(ret)) - goto fail; - - ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_enable_usb_output(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_top_master_ctrl(state, 1); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_init_port_expander(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); - if (mxl_fail(ret)) - goto fail; - - ret = get_chip_info(state); - if (mxl_fail(ret)) - goto fail; - - adap->fe_adap[fe_id].fe = dvb_attach(lg2160_attach, - (MXL111SF_V8_200 == state->chip_rev) ? - &hauppauge_lg2161_1040_config : - &hauppauge_lg2161_1019_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[fe_id].fe) { - adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init; - adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init; - adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep; - adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep; - return 0; - } - ret = -EIO; -fail: - return ret; -} - -static struct lg2160_config hauppauge_lg2161_1019_ep6_config = { - .lg_chip = LG2161_1019, - .i2c_addr = 0x1c >> 1, - .deny_i2c_rptr = 1, - .spectral_inversion = 0, - .if_khz = 6000, - .output_if = 1, /* LG2161_OIF_SERIAL_TS */ -}; - -static struct lg2160_config hauppauge_lg2161_1040_ep6_config = { - .lg_chip = LG2161_1040, - .i2c_addr = 0x1c >> 1, - .deny_i2c_rptr = 1, - .spectral_inversion = 0, - .if_khz = 6000, - .output_if = 7, /* LG2161_OIF_SERIAL_TS */ -}; - -static int mxl111sf_lg2161_ep6_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap->dev; - struct mxl111sf_state *state = d->priv; - int fe_id = adap->num_frontends_initialized; - struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv; - int ret; - - deb_adv("%s()\n", __func__); - - /* save a pointer to the dvb_usb_device in device state */ - state->d = d; - adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; - state->alt_mode = adap_state->alt_mode; - - if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0) - err("set interface failed"); - - state->gpio_mode = MXL111SF_GPIO_MOD_MH; - adap_state->gpio_mode = state->gpio_mode; - adap_state->device_mode = MXL_TUNER_MODE; - adap_state->ep6_clockphase = 0; - - ret = mxl1x1sf_soft_reset(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_init_tuner_demod(state); - if (mxl_fail(ret)) - goto fail; - - ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_enable_usb_output(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_top_master_ctrl(state, 1); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_init_port_expander(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); - if (mxl_fail(ret)) - goto fail; - - ret = get_chip_info(state); - if (mxl_fail(ret)) - goto fail; - - adap->fe_adap[fe_id].fe = dvb_attach(lg2160_attach, - (MXL111SF_V8_200 == state->chip_rev) ? - &hauppauge_lg2161_1040_ep6_config : - &hauppauge_lg2161_1019_ep6_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[fe_id].fe) { - adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init; - adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init; - adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep; - adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep; - return 0; - } - ret = -EIO; -fail: - return ret; -} - -static struct mxl111sf_demod_config mxl_demod_config = { - .read_reg = mxl111sf_read_reg, - .write_reg = mxl111sf_write_reg, - .program_regs = mxl111sf_ctrl_program_regs, -}; - -static int mxl111sf_attach_demod(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap->dev; - struct mxl111sf_state *state = d->priv; - int fe_id = adap->num_frontends_initialized; - struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv; - int ret; - - deb_adv("%s()\n", __func__); - - /* save a pointer to the dvb_usb_device in device state */ - state->d = d; - adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 1 : 2; - state->alt_mode = adap_state->alt_mode; - - if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0) - err("set interface failed"); - - state->gpio_mode = MXL111SF_GPIO_MOD_DVBT; - adap_state->gpio_mode = state->gpio_mode; - adap_state->device_mode = MXL_SOC_MODE; - adap_state->ep6_clockphase = 1; - - ret = mxl1x1sf_soft_reset(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_init_tuner_demod(state); - if (mxl_fail(ret)) - goto fail; - - ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_enable_usb_output(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_top_master_ctrl(state, 1); - if (mxl_fail(ret)) - goto fail; - - /* dont care if this fails */ - mxl111sf_init_port_expander(state); - - adap->fe_adap[fe_id].fe = dvb_attach(mxl111sf_demod_attach, state, - &mxl_demod_config); - if (adap->fe_adap[fe_id].fe) { - adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init; - adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init; - adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep; - adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep; - return 0; - } - ret = -EIO; -fail: - return ret; -} - -static inline int mxl111sf_set_ant_path(struct mxl111sf_state *state, - int antpath) -{ - return mxl111sf_idac_config(state, 1, 1, - (antpath == ANT_PATH_INTERNAL) ? - 0x3f : 0x00, 0); -} - -#define DbgAntHunt(x, pwr0, pwr1, pwr2, pwr3) \ - err("%s(%d) FINAL input set to %s rxPwr:%d|%d|%d|%d\n", \ - __func__, __LINE__, \ - (ANT_PATH_EXTERNAL == x) ? "EXTERNAL" : "INTERNAL", \ - pwr0, pwr1, pwr2, pwr3) - -#define ANT_HUNT_SLEEP 90 -#define ANT_EXT_TWEAK 0 - -static int mxl111sf_ant_hunt(struct dvb_frontend *fe) -{ - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dvb_usb_device *d = adap->dev; - struct mxl111sf_state *state = d->priv; - - int antctrl = dvb_usb_mxl111sf_rfswitch; - - u16 rxPwrA, rxPwr0, rxPwr1, rxPwr2; - - /* FIXME: must force EXTERNAL for QAM - done elsewhere */ - mxl111sf_set_ant_path(state, antctrl == ANT_PATH_AUTO ? - ANT_PATH_EXTERNAL : antctrl); - - if (antctrl == ANT_PATH_AUTO) { -#if 0 - msleep(ANT_HUNT_SLEEP); -#endif - fe->ops.tuner_ops.get_rf_strength(fe, &rxPwrA); - - mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL); - msleep(ANT_HUNT_SLEEP); - fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr0); - - mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL); - msleep(ANT_HUNT_SLEEP); - fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr1); - - mxl111sf_set_ant_path(state, ANT_PATH_INTERNAL); - msleep(ANT_HUNT_SLEEP); - fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr2); - - if (rxPwr1+ANT_EXT_TWEAK >= rxPwr2) { - /* return with EXTERNAL enabled */ - mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL); - DbgAntHunt(ANT_PATH_EXTERNAL, rxPwrA, - rxPwr0, rxPwr1, rxPwr2); - } else { - /* return with INTERNAL enabled */ - DbgAntHunt(ANT_PATH_INTERNAL, rxPwrA, - rxPwr0, rxPwr1, rxPwr2); - } - } - return 0; -} - -static struct mxl111sf_tuner_config mxl_tuner_config = { - .if_freq = MXL_IF_6_0, /* applies to external IF output, only */ - .invert_spectrum = 0, - .read_reg = mxl111sf_read_reg, - .write_reg = mxl111sf_write_reg, - .program_regs = mxl111sf_ctrl_program_regs, - .top_master_ctrl = mxl1x1sf_top_master_ctrl, - .ant_hunt = mxl111sf_ant_hunt, -}; - -static int mxl111sf_attach_tuner(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap->dev; - struct mxl111sf_state *state = d->priv; - int fe_id = adap->num_frontends_initialized; - - deb_adv("%s()\n", __func__); - - if (NULL != dvb_attach(mxl111sf_tuner_attach, - adap->fe_adap[fe_id].fe, state, - &mxl_tuner_config)) - return 0; - - return -EIO; -} - -static int mxl111sf_fe_ioctl_override(struct dvb_frontend *fe, - unsigned int cmd, void *parg, - unsigned int stage) -{ - int err = 0; - - switch (stage) { - case DVB_FE_IOCTL_PRE: - - switch (cmd) { - case FE_READ_SIGNAL_STRENGTH: - err = fe->ops.tuner_ops.get_rf_strength(fe, parg); - /* If no error occurs, prevent dvb-core from handling - * this IOCTL, otherwise return the error */ - if (0 == err) - err = 1; - break; - } - break; - - case DVB_FE_IOCTL_POST: - /* no post-ioctl handling required */ - break; - } - return err; -}; - -static u32 mxl111sf_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -struct i2c_algorithm mxl111sf_i2c_algo = { - .master_xfer = mxl111sf_i2c_xfer, - .functionality = mxl111sf_i2c_func, -#ifdef NEED_ALGO_CONTROL - .algo_control = dummy_algo_control, -#endif -}; - -static struct dvb_usb_device_properties mxl111sf_dvbt_bulk_properties; -static struct dvb_usb_device_properties mxl111sf_dvbt_isoc_properties; -static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties; -static struct dvb_usb_device_properties mxl111sf_atsc_isoc_properties; -static struct dvb_usb_device_properties mxl111sf_atsc_mh_bulk_properties; -static struct dvb_usb_device_properties mxl111sf_atsc_mh_isoc_properties; -static struct dvb_usb_device_properties mxl111sf_mh_bulk_properties; -static struct dvb_usb_device_properties mxl111sf_mh_isoc_properties; -static struct dvb_usb_device_properties mxl111sf_mercury_spi_bulk_properties; -static struct dvb_usb_device_properties mxl111sf_mercury_spi_isoc_properties; -static struct dvb_usb_device_properties mxl111sf_mercury_tp_bulk_properties; -static struct dvb_usb_device_properties mxl111sf_mercury_tp_isoc_properties; -static struct dvb_usb_device_properties mxl111sf_mercury_mh_spi_bulk_properties; -static struct dvb_usb_device_properties mxl111sf_mercury_mh_spi_isoc_properties; -static struct dvb_usb_device_properties mxl111sf_mercury_mh_tp_bulk_properties; -static struct dvb_usb_device_properties mxl111sf_mercury_mh_tp_isoc_properties; - -static int mxl111sf_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct dvb_usb_device *d = NULL; - - deb_adv("%s()\n", __func__); - - if (((dvb_usb_mxl111sf_isoc) && - (0 == dvb_usb_device_init(intf, - &mxl111sf_dvbt_isoc_properties, - THIS_MODULE, &d, adapter_nr) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_atsc_isoc_properties, - THIS_MODULE, &d, adapter_nr) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_atsc_mh_isoc_properties, - THIS_MODULE, &d, adapter_nr) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_mh_isoc_properties, - THIS_MODULE, &d, adapter_nr) || - ((dvb_usb_mxl111sf_spi) && - (0 == dvb_usb_device_init(intf, - &mxl111sf_mercury_spi_isoc_properties, - THIS_MODULE, &d, adapter_nr) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_mercury_mh_spi_isoc_properties, - THIS_MODULE, &d, adapter_nr))) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_mercury_tp_isoc_properties, - THIS_MODULE, &d, adapter_nr) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_mercury_mh_tp_isoc_properties, - THIS_MODULE, &d, adapter_nr))) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_dvbt_bulk_properties, - THIS_MODULE, &d, adapter_nr) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_atsc_bulk_properties, - THIS_MODULE, &d, adapter_nr) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_atsc_mh_bulk_properties, - THIS_MODULE, &d, adapter_nr) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_mh_bulk_properties, - THIS_MODULE, &d, adapter_nr) || - ((dvb_usb_mxl111sf_spi) && - (0 == dvb_usb_device_init(intf, - &mxl111sf_mercury_spi_bulk_properties, - THIS_MODULE, &d, adapter_nr) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_mercury_mh_spi_bulk_properties, - THIS_MODULE, &d, adapter_nr))) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_mercury_tp_bulk_properties, - THIS_MODULE, &d, adapter_nr) || - 0 == dvb_usb_device_init(intf, - &mxl111sf_mercury_mh_tp_bulk_properties, - THIS_MODULE, &d, adapter_nr) || 0) { - - struct mxl111sf_state *state = d->priv; - static u8 eeprom[256]; - struct i2c_client c; - int ret; - - ret = get_chip_info(state); - if (mxl_fail(ret)) - err("failed to get chip info during probe"); - - mutex_init(&state->fe_lock); - - if (state->chip_rev > MXL111SF_V6) - mxl111sf_config_pin_mux_modes(state, - PIN_MUX_TS_SPI_IN_MODE_1); - - c.adapter = &d->i2c_adap; - c.addr = 0xa0 >> 1; - - ret = tveeprom_read(&c, eeprom, sizeof(eeprom)); - if (mxl_fail(ret)) - return 0; - tveeprom_hauppauge_analog(&c, &state->tv, - (0x84 == eeprom[0xa0]) ? - eeprom + 0xa0 : eeprom + 0x80); -#if 0 - switch (state->tv.model) { - case 117001: - case 126001: - case 138001: - break; - default: - printk(KERN_WARNING "%s: warning: " - "unknown hauppauge model #%d\n", - __func__, state->tv.model); - } -#endif - return 0; - } - err("Your device is not yet supported by this driver. " - "See kernellabs.com for more info"); - return -EINVAL; -} - -static struct usb_device_id mxl111sf_table[] = { -/* 0 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc600) }, /* ATSC+ IR */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc601) }, /* ATSC */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc602) }, /* + */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc603) }, /* ATSC+ */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc604) }, /* DVBT */ -/* 5 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc609) }, /* ATSC IR */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60a) }, /* + IR */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60b) }, /* ATSC+ IR */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60c) }, /* DVBT IR */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc653) }, /* ATSC+ */ -/*10 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc65b) }, /* ATSC+ IR */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb700) }, /* ATSC+ sw */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb701) }, /* ATSC sw */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb702) }, /* + sw */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb703) }, /* ATSC+ sw */ -/*15 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb704) }, /* DVBT sw */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb753) }, /* ATSC+ sw */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb763) }, /* ATSC+ no */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb764) }, /* DVBT no */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd853) }, /* ATSC+ sw */ -/*20 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd854) }, /* DVBT sw */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd863) }, /* ATSC+ no */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd864) }, /* DVBT no */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d3) }, /* ATSC+ sw */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d4) }, /* DVBT sw */ -/*25 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e3) }, /* ATSC+ no */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e4) }, /* DVBT no */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8ff) }, /* ATSC+ */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc612) }, /* + */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc613) }, /* ATSC+ */ -/*30 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61a) }, /* + IR */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61b) }, /* ATSC+ IR */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb757) }, /* ATSC+DVBT sw */ - { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb767) }, /* ATSC+DVBT no */ - {} /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, mxl111sf_table); - - -#define MXL111SF_EP4_BULK_STREAMING_CONFIG \ - .size_of_priv = sizeof(struct mxl111sf_adap_state), \ - .streaming_ctrl = mxl111sf_ep4_streaming_ctrl, \ - .stream = { \ - .type = USB_BULK, \ - .count = 5, \ - .endpoint = 0x04, \ - .u = { \ - .bulk = { \ - .buffersize = 8192, \ - } \ - } \ - } - -/* FIXME: works for v6 but not v8 silicon */ -#define MXL111SF_EP4_ISOC_STREAMING_CONFIG \ - .size_of_priv = sizeof(struct mxl111sf_adap_state), \ - .streaming_ctrl = mxl111sf_ep4_streaming_ctrl, \ - .stream = { \ - .type = USB_ISOC, \ - .count = 5, \ - .endpoint = 0x04, \ - .u = { \ - .isoc = { \ - .framesperurb = 96, \ - /* FIXME: v6 SILICON: */ \ - .framesize = 564, \ - .interval = 1, \ - } \ - } \ - } - -#define MXL111SF_EP5_BULK_STREAMING_CONFIG \ - .size_of_priv = sizeof(struct mxl111sf_adap_state), \ - .streaming_ctrl = mxl111sf_ep5_streaming_ctrl, \ - .stream = { \ - .type = USB_BULK, \ - .count = 5, \ - .endpoint = 0x05, \ - .u = { \ - .bulk = { \ - .buffersize = 8192, \ - } \ - } \ - } - -#define MXL111SF_EP5_ISOC_STREAMING_CONFIG \ - .size_of_priv = sizeof(struct mxl111sf_adap_state), \ - .streaming_ctrl = mxl111sf_ep5_streaming_ctrl, \ - .stream = { \ - .type = USB_ISOC, \ - .count = 5, \ - .endpoint = 0x05, \ - .u = { \ - .isoc = { \ - .framesperurb = 96, \ - .framesize = 200, \ - .interval = 1, \ - } \ - } \ - } - -#define MXL111SF_EP6_BULK_STREAMING_CONFIG \ - .size_of_priv = sizeof(struct mxl111sf_adap_state), \ - .streaming_ctrl = mxl111sf_ep6_streaming_ctrl, \ - .stream = { \ - .type = USB_BULK, \ - .count = 5, \ - .endpoint = 0x06, \ - .u = { \ - .bulk = { \ - .buffersize = 8192, \ - } \ - } \ - } - -/* FIXME */ -#define MXL111SF_EP6_ISOC_STREAMING_CONFIG \ - .size_of_priv = sizeof(struct mxl111sf_adap_state), \ - .streaming_ctrl = mxl111sf_ep6_streaming_ctrl, \ - .stream = { \ - .type = USB_ISOC, \ - .count = 5, \ - .endpoint = 0x06, \ - .u = { \ - .isoc = { \ - .framesperurb = 24, \ - .framesize = 3072, \ - .interval = 1, \ - } \ - } \ - } - -#define MXL111SF_DEFAULT_DEVICE_PROPERTIES \ - .caps = DVB_USB_IS_AN_I2C_ADAPTER, \ - .usb_ctrl = DEVICE_SPECIFIC, \ - /* use usb alt setting 1 for EP4 ISOC transfer (dvb-t), \ - EP6 BULK transfer (atsc/qam), \ - use usb alt setting 2 for EP4 BULK transfer (dvb-t), \ - EP6 ISOC transfer (atsc/qam), \ - */ \ - .power_ctrl = mxl111sf_power_ctrl, \ - .i2c_algo = &mxl111sf_i2c_algo, \ - .generic_bulk_ctrl_endpoint = MXL_EP2_REG_WRITE, \ - .generic_bulk_ctrl_endpoint_response = MXL_EP1_REG_READ, \ - .size_of_priv = sizeof(struct mxl111sf_state) - -static struct dvb_usb_device_properties mxl111sf_dvbt_bulk_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 1, - .fe = {{ - .frontend_attach = mxl111sf_attach_demod, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP4_BULK_STREAMING_CONFIG, - } }, - }, - }, - .num_device_descs = 3, - .devices = { - { "Hauppauge 126xxx DVBT (bulk)", - { NULL }, - { &mxl111sf_table[4], &mxl111sf_table[8], - NULL }, - }, - { "Hauppauge 117xxx DVBT (bulk)", - { NULL }, - { &mxl111sf_table[15], &mxl111sf_table[18], - NULL }, - }, - { "Hauppauge 138xxx DVBT (bulk)", - { NULL }, - { &mxl111sf_table[20], &mxl111sf_table[22], - &mxl111sf_table[24], &mxl111sf_table[26], - NULL }, - }, - } -}; - -static struct dvb_usb_device_properties mxl111sf_dvbt_isoc_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 1, - .fe = {{ - .frontend_attach = mxl111sf_attach_demod, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP4_ISOC_STREAMING_CONFIG, - } }, - }, - }, - .num_device_descs = 3, - .devices = { - { "Hauppauge 126xxx DVBT (isoc)", - { NULL }, - { &mxl111sf_table[4], &mxl111sf_table[8], - NULL }, - }, - { "Hauppauge 117xxx DVBT (isoc)", - { NULL }, - { &mxl111sf_table[15], &mxl111sf_table[18], - NULL }, - }, - { "Hauppauge 138xxx DVBT (isoc)", - { NULL }, - { &mxl111sf_table[20], &mxl111sf_table[22], - &mxl111sf_table[24], &mxl111sf_table[26], - NULL }, - }, - } -}; - -static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 1, - .fe = {{ - .frontend_attach = mxl111sf_lgdt3305_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP6_BULK_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 2, - .devices = { - { "Hauppauge 126xxx ATSC (bulk)", - { NULL }, - { &mxl111sf_table[1], &mxl111sf_table[5], - NULL }, - }, - { "Hauppauge 117xxx ATSC (bulk)", - { NULL }, - { &mxl111sf_table[12], - NULL }, - }, - } -}; - -static struct dvb_usb_device_properties mxl111sf_atsc_isoc_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 1, - .fe = {{ - .frontend_attach = mxl111sf_lgdt3305_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP6_ISOC_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 2, - .devices = { - { "Hauppauge 126xxx ATSC (isoc)", - { NULL }, - { &mxl111sf_table[1], &mxl111sf_table[5], - NULL }, - }, - { "Hauppauge 117xxx ATSC (isoc)", - { NULL }, - { &mxl111sf_table[12], - NULL }, - }, - } -}; - -static struct dvb_usb_device_properties mxl111sf_mh_bulk_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD, - - .frontend_attach = mxl111sf_lg2160_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP5_BULK_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 2, - .devices = { - { "HCW 126xxx (bulk)", - { NULL }, - { &mxl111sf_table[2], &mxl111sf_table[6], - NULL }, - }, - { "HCW 117xxx (bulk)", - { NULL }, - { &mxl111sf_table[13], - NULL }, - }, - } -}; - -static struct dvb_usb_device_properties mxl111sf_mh_isoc_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD, - - .frontend_attach = mxl111sf_lg2160_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP5_ISOC_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 2, - .devices = { - { "HCW 126xxx (isoc)", - { NULL }, - { &mxl111sf_table[2], &mxl111sf_table[6], - NULL }, - }, - { "HCW 117xxx (isoc)", - { NULL }, - { &mxl111sf_table[13], - NULL }, - }, - } -}; - -static struct dvb_usb_device_properties mxl111sf_atsc_mh_bulk_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 3, - .fe = {{ - .frontend_attach = mxl111sf_lgdt3305_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP6_BULK_STREAMING_CONFIG, - }, - { - .frontend_attach = mxl111sf_attach_demod, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP4_BULK_STREAMING_CONFIG, - }, - { - .caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD, - - .frontend_attach = mxl111sf_lg2160_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP5_BULK_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 2, - .devices = { - { "Hauppauge 126xxx ATSC+ (bulk)", - { NULL }, - { &mxl111sf_table[0], &mxl111sf_table[3], - &mxl111sf_table[7], &mxl111sf_table[9], - &mxl111sf_table[10], NULL }, - }, - { "Hauppauge 117xxx ATSC+ (bulk)", - { NULL }, - { &mxl111sf_table[11], &mxl111sf_table[14], - &mxl111sf_table[16], &mxl111sf_table[17], - &mxl111sf_table[32], &mxl111sf_table[33], - NULL }, - }, - } -}; - -static struct dvb_usb_device_properties mxl111sf_atsc_mh_isoc_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 3, - .fe = {{ - .frontend_attach = mxl111sf_lgdt3305_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP6_ISOC_STREAMING_CONFIG, - }, - { - .frontend_attach = mxl111sf_attach_demod, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP4_ISOC_STREAMING_CONFIG, - }, - { - .caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD, - - .frontend_attach = mxl111sf_lg2160_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP5_ISOC_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 2, - .devices = { - { "Hauppauge 126xxx ATSC+ (isoc)", - { NULL }, - { &mxl111sf_table[0], &mxl111sf_table[3], - &mxl111sf_table[7], &mxl111sf_table[9], - &mxl111sf_table[10], NULL }, - }, - { "Hauppauge 117xxx ATSC+ (isoc)", - { NULL }, - { &mxl111sf_table[11], &mxl111sf_table[14], - &mxl111sf_table[16], &mxl111sf_table[17], - &mxl111sf_table[32], &mxl111sf_table[33], - NULL }, - }, - } -}; - -static struct dvb_usb_device_properties mxl111sf_mercury_spi_bulk_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 3, - .fe = {{ - .frontend_attach = mxl111sf_lgdt3305_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP6_BULK_STREAMING_CONFIG, - }, - { - .frontend_attach = mxl111sf_attach_demod, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP4_BULK_STREAMING_CONFIG, - }, - { - .caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD, - - .frontend_attach = mxl111sf_lg2161_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP5_BULK_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 2, - .devices = { - { "Hauppauge Mercury (spi-bulk)", - { NULL }, - { &mxl111sf_table[19], &mxl111sf_table[21], - &mxl111sf_table[23], &mxl111sf_table[25], - NULL }, - }, - { "Hauppauge WinTV-Aero-M (spi-bulk)", - { NULL }, - { &mxl111sf_table[29], &mxl111sf_table[31], - NULL }, - }, - } -}; - -static struct dvb_usb_device_properties mxl111sf_mercury_spi_isoc_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 3, - .fe = {{ - .frontend_attach = mxl111sf_lgdt3305_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP6_ISOC_STREAMING_CONFIG, - }, - { - .frontend_attach = mxl111sf_attach_demod, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP4_ISOC_STREAMING_CONFIG, - }, - { - .caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD, - - .frontend_attach = mxl111sf_lg2161_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP5_ISOC_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 2, - .devices = { - { "Hauppauge Mercury (spi-isoc)", - { NULL }, - { &mxl111sf_table[19], &mxl111sf_table[21], - &mxl111sf_table[23], &mxl111sf_table[25], - NULL }, - }, - { "Hauppauge WinTV-Aero-M (spi-isoc)", - { NULL }, - { &mxl111sf_table[29], &mxl111sf_table[31], - NULL }, - }, - } -}; - -static struct dvb_usb_device_properties mxl111sf_mercury_tp_bulk_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 3, - .fe = {{ - .frontend_attach = mxl111sf_lgdt3305_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP6_BULK_STREAMING_CONFIG, - }, - { - .frontend_attach = mxl111sf_attach_demod, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP4_BULK_STREAMING_CONFIG, - }, - { - .caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD, - - .frontend_attach = mxl111sf_lg2161_ep6_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP6_BULK_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 2, - .devices = { - { "Hauppauge Mercury (tp-bulk)", - { NULL }, - { &mxl111sf_table[19], &mxl111sf_table[21], - &mxl111sf_table[23], &mxl111sf_table[25], - &mxl111sf_table[27], NULL }, - }, - { "Hauppauge WinTV-Aero-M", - { NULL }, - { &mxl111sf_table[29], &mxl111sf_table[31], - NULL }, - }, - } -}; - -static struct dvb_usb_device_properties mxl111sf_mercury_tp_isoc_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 3, - .fe = {{ - .frontend_attach = mxl111sf_lgdt3305_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP6_ISOC_STREAMING_CONFIG, - }, - { - .frontend_attach = mxl111sf_attach_demod, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP4_ISOC_STREAMING_CONFIG, - }, - { - .caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD, - - .frontend_attach = mxl111sf_lg2161_ep6_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP6_ISOC_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 2, - .devices = { - { "Hauppauge Mercury (tp-isoc)", - { NULL }, - { &mxl111sf_table[19], &mxl111sf_table[21], - &mxl111sf_table[23], &mxl111sf_table[25], - &mxl111sf_table[27], NULL }, - }, - { "Hauppauge WinTV-Aero-M (tp-isoc)", - { NULL }, - { &mxl111sf_table[29], &mxl111sf_table[31], - NULL }, - }, - } -}; - -static -struct dvb_usb_device_properties mxl111sf_mercury_mh_tp_bulk_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 2, - .fe = {{ - .frontend_attach = mxl111sf_attach_demod, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP4_BULK_STREAMING_CONFIG, - }, - { - .caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD, - - .frontend_attach = mxl111sf_lg2161_ep6_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP6_BULK_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 1, - .devices = { - { "Hauppauge 126xxx (tp-bulk)", - { NULL }, - { &mxl111sf_table[28], &mxl111sf_table[30], - NULL }, - }, - } -}; - -static -struct dvb_usb_device_properties mxl111sf_mercury_mh_tp_isoc_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 2, - .fe = {{ - .frontend_attach = mxl111sf_attach_demod, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP4_ISOC_STREAMING_CONFIG, - }, - { - .caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD, - - .frontend_attach = mxl111sf_lg2161_ep6_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP6_ISOC_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 1, - .devices = { - { "Hauppauge 126xxx (tp-isoc)", - { NULL }, - { &mxl111sf_table[28], &mxl111sf_table[30], - NULL }, - }, - } -}; - -static -struct dvb_usb_device_properties mxl111sf_mercury_mh_spi_bulk_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 2, - .fe = {{ - .frontend_attach = mxl111sf_attach_demod, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP4_BULK_STREAMING_CONFIG, - }, - { - .caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD, - - .frontend_attach = mxl111sf_lg2161_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP5_BULK_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 1, - .devices = { - { "Hauppauge 126xxx (spi-bulk)", - { NULL }, - { &mxl111sf_table[28], &mxl111sf_table[30], - NULL }, - }, - } -}; - -static -struct dvb_usb_device_properties mxl111sf_mercury_mh_spi_isoc_properties = { - MXL111SF_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .fe_ioctl_override = mxl111sf_fe_ioctl_override, - .num_frontends = 2, - .fe = {{ - .frontend_attach = mxl111sf_attach_demod, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP4_ISOC_STREAMING_CONFIG, - }, - { - .caps = DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD, - - .frontend_attach = mxl111sf_lg2161_frontend_attach, - .tuner_attach = mxl111sf_attach_tuner, - - MXL111SF_EP5_ISOC_STREAMING_CONFIG, - }}, - }, - }, - .num_device_descs = 1, - .devices = { - { "Hauppauge 126xxx (spi-isoc)", - { NULL }, - { &mxl111sf_table[28], &mxl111sf_table[30], - NULL }, - }, - } -}; - -static struct usb_driver mxl111sf_driver = { - .name = "dvb_usb_mxl111sf", - .probe = mxl111sf_probe, - .disconnect = dvb_usb_device_exit, - .id_table = mxl111sf_table, -}; - -module_usb_driver(mxl111sf_driver); - -MODULE_AUTHOR("Michael Krufky "); -MODULE_DESCRIPTION("Driver for MaxLinear MxL111SF"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/frontends/ec100_priv.h b/drivers/media/dvb/frontends/ec100_priv.h deleted file mode 100644 index 5c990144bc47272bcc3b90c57910435915caaf9f..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/frontends/ec100_priv.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * E3C EC100 demodulator driver - * - * Copyright (C) 2009 Antti Palosaari - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef EC100_PRIV -#define EC100_PRIV - -#define LOG_PREFIX "ec100" - -#define dprintk(var, level, args...) \ - do { if ((var & level)) printk(args); } while (0) - -#define deb_info(args...) dprintk(ec100_debug, 0x01, args) - -#undef err -#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) -#undef info -#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) -#undef warn -#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg) - -#endif /* EC100_PRIV */ diff --git a/drivers/media/dvb/ngene/Kconfig b/drivers/media/dvb/ngene/Kconfig deleted file mode 100644 index 64c84702ba5cf66be59300f89bfa1cc83c98fb5c..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/ngene/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -config DVB_NGENE - tristate "Micronas nGene support" - depends on DVB_CORE && PCI && I2C - select DVB_LNBP21 if !DVB_FE_CUSTOMISE - select DVB_STV6110x if !DVB_FE_CUSTOMISE - select DVB_STV090x if !DVB_FE_CUSTOMISE - select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select DVB_DRXK if !DVB_FE_CUSTOMISE - select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE - ---help--- - Support for Micronas PCI express cards with nGene bridge. - diff --git a/drivers/media/dvb/pluto2/Makefile b/drivers/media/dvb/pluto2/Makefile deleted file mode 100644 index 700822350ec5def033151293ea8e0ffc6585aa17..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/pluto2/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_DVB_PLUTO2) += pluto2.o - -ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig deleted file mode 100644 index bc6456eb2c4fda8a5528e3b9b68b6014bdaccc19..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/siano/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -# -# Siano Mobile Silicon Digital TV device configuration -# - -config SMS_SIANO_MDTV - tristate "Siano SMS1xxx based MDTV receiver" - depends on DVB_CORE && RC_CORE && HAS_DMA - ---help--- - Choose Y or M here if you have MDTV receiver with a Siano chipset. - - To compile this driver as a module, choose M here - (The module will be called smsmdtv). - - Further documentation on this driver can be found on the WWW - at http://www.siano-ms.com/ - -if SMS_SIANO_MDTV -menu "Siano module components" - -# Hardware interfaces support - -config SMS_USB_DRV - tristate "USB interface support" - depends on DVB_CORE && USB - ---help--- - Choose if you would like to have Siano's support for USB interface - -config SMS_SDIO_DRV - tristate "SDIO interface support" - depends on DVB_CORE && MMC - ---help--- - Choose if you would like to have Siano's support for SDIO interface -endmenu -endif # SMS_SIANO_MDTV diff --git a/drivers/media/dvb/ttusb-budget/Makefile b/drivers/media/dvb/ttusb-budget/Makefile deleted file mode 100644 index 8d6c4acb7f1d49eada6f692b545d0940dff6fb03..0000000000000000000000000000000000000000 --- a/drivers/media/dvb/ttusb-budget/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_DVB_TTUSB_BUDGET) += dvb-ttusb-budget.o - -ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends diff --git a/drivers/media/dvb/firewire/Kconfig b/drivers/media/firewire/Kconfig similarity index 100% rename from drivers/media/dvb/firewire/Kconfig rename to drivers/media/firewire/Kconfig diff --git a/drivers/media/dvb/firewire/Makefile b/drivers/media/firewire/Makefile similarity index 51% rename from drivers/media/dvb/firewire/Makefile rename to drivers/media/firewire/Makefile index 357b3aab186b2d1645419a073bee2e26acdf9ba7..239481344d7ca858692d8493a1a1c1c4cef2f9b3 100644 --- a/drivers/media/dvb/firewire/Makefile +++ b/drivers/media/firewire/Makefile @@ -1,6 +1,6 @@ obj-$(CONFIG_DVB_FIREDTV) += firedtv.o -firedtv-y := firedtv-avc.o firedtv-ci.o firedtv-dvb.o firedtv-fe.o firedtv-fw.o +firedtv-y += firedtv-avc.o firedtv-ci.o firedtv-dvb.o firedtv-fe.o firedtv-fw.o firedtv-$(CONFIG_DVB_FIREDTV_INPUT) += firedtv-rc.o -ccflags-y += -Idrivers/media/dvb/dvb-core +ccflags-y += -Idrivers/media/dvb-core diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/firewire/firedtv-avc.c similarity index 100% rename from drivers/media/dvb/firewire/firedtv-avc.c rename to drivers/media/firewire/firedtv-avc.c diff --git a/drivers/media/dvb/firewire/firedtv-ci.c b/drivers/media/firewire/firedtv-ci.c similarity index 100% rename from drivers/media/dvb/firewire/firedtv-ci.c rename to drivers/media/firewire/firedtv-ci.c diff --git a/drivers/media/dvb/firewire/firedtv-dvb.c b/drivers/media/firewire/firedtv-dvb.c similarity index 100% rename from drivers/media/dvb/firewire/firedtv-dvb.c rename to drivers/media/firewire/firedtv-dvb.c diff --git a/drivers/media/dvb/firewire/firedtv-fe.c b/drivers/media/firewire/firedtv-fe.c similarity index 100% rename from drivers/media/dvb/firewire/firedtv-fe.c rename to drivers/media/firewire/firedtv-fe.c diff --git a/drivers/media/dvb/firewire/firedtv-fw.c b/drivers/media/firewire/firedtv-fw.c similarity index 100% rename from drivers/media/dvb/firewire/firedtv-fw.c rename to drivers/media/firewire/firedtv-fw.c diff --git a/drivers/media/dvb/firewire/firedtv-rc.c b/drivers/media/firewire/firedtv-rc.c similarity index 100% rename from drivers/media/dvb/firewire/firedtv-rc.c rename to drivers/media/firewire/firedtv-rc.c diff --git a/drivers/media/dvb/firewire/firedtv.h b/drivers/media/firewire/firedtv.h similarity index 100% rename from drivers/media/dvb/firewire/firedtv.h rename to drivers/media/firewire/firedtv.h diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..24d78e28e493f38049ab7adcf78ae504d8236f3e --- /dev/null +++ b/drivers/media/i2c/Kconfig @@ -0,0 +1,591 @@ +# +# Generic video config states +# + +config VIDEO_BTCX + depends on PCI + tristate + +config VIDEO_TVEEPROM + tristate + depends on I2C + +# +# Multimedia Video device configuration +# + +if VIDEO_V4L2 + +config VIDEO_IR_I2C + tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT + depends on I2C && RC_CORE + default y + ---help--- + Most boards have an IR chip directly connected via GPIO. However, + some video boards have the IR connected via I2C bus. + + If your board doesn't have an I2C IR chip, you may disable this + option. + + In doubt, say Y. + +# +# Encoder / Decoder module configuration +# + +menu "Encoders, decoders, sensors and other helper chips" + visible if !MEDIA_SUBDRV_AUTOSELECT + +comment "Audio decoders, processors and mixers" + +config VIDEO_TVAUDIO + tristate "Simple audio decoder chips" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for several audio decoder chips found on some bt8xx boards: + Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, + tea6320, tea6420, tda8425, ta8874z. + Microchip: pic16c54 based design on ProVideo PV951 board. + + To compile this driver as a module, choose M here: the + module will be called tvaudio. + +config VIDEO_TDA7432 + tristate "Philips TDA7432 audio processor" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for tda7432 audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tda7432. + +config VIDEO_TDA9840 + tristate "Philips TDA9840 audio processor" + depends on I2C + ---help--- + Support for tda9840 audio decoder chip found on some Zoran boards. + + To compile this driver as a module, choose M here: the + module will be called tda9840. + +config VIDEO_TEA6415C + tristate "Philips TEA6415C audio processor" + depends on I2C + ---help--- + Support for tea6415c audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tea6415c. + +config VIDEO_TEA6420 + tristate "Philips TEA6420 audio processor" + depends on I2C + ---help--- + Support for tea6420 audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tea6420. + +config VIDEO_MSP3400 + tristate "Micronas MSP34xx audio decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Micronas MSP34xx series of audio decoders. + + To compile this driver as a module, choose M here: the + module will be called msp3400. + +config VIDEO_CS5345 + tristate "Cirrus Logic CS5345 audio ADC" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Cirrus Logic CS5345 24-bit, 192 kHz + stereo A/D converter. + + To compile this driver as a module, choose M here: the + module will be called cs5345. + +config VIDEO_CS53L32A + tristate "Cirrus Logic CS53L32A audio ADC" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Cirrus Logic CS53L32A low voltage + stereo A/D converter. + + To compile this driver as a module, choose M here: the + module will be called cs53l32a. + +config VIDEO_TLV320AIC23B + tristate "Texas Instruments TLV320AIC23B audio codec" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Texas Instruments TLV320AIC23B audio codec. + + To compile this driver as a module, choose M here: the + module will be called tlv320aic23b. + +config VIDEO_WM8775 + tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Wolfson Microelectronics WM8775 high + performance stereo A/D Converter with a 4 channel input mixer. + + To compile this driver as a module, choose M here: the + module will be called wm8775. + +config VIDEO_WM8739 + tristate "Wolfson Microelectronics WM8739 stereo audio ADC" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Wolfson Microelectronics WM8739 + stereo A/D Converter. + + To compile this driver as a module, choose M here: the + module will be called wm8739. + +config VIDEO_VP27SMPX + tristate "Panasonic VP27s internal MPX" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the internal MPX of the Panasonic VP27s tuner. + + To compile this driver as a module, choose M here: the + module will be called vp27smpx. + +comment "RDS decoders" + +config VIDEO_SAA6588 + tristate "SAA6588 Radio Chip RDS decoder support" + depends on VIDEO_V4L2 && I2C + + help + Support for this Radio Data System (RDS) decoder. This allows + seeing radio station identification transmitted using this + standard. + + To compile this driver as a module, choose M here: the + module will be called saa6588. + +comment "Video decoders" + +config VIDEO_ADV7180 + tristate "Analog Devices ADV7180 decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7180 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7180. + +config VIDEO_ADV7183 + tristate "Analog Devices ADV7183 decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + V4l2 subdevice driver for the Analog Devices + ADV7183 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7183. + +config VIDEO_ADV7604 + tristate "Analog Devices ADV7604 decoder" + depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API + ---help--- + Support for the Analog Devices ADV7604 video decoder. + + This is a Analog Devices Component/Graphics Digitizer + with 4:1 Multiplexed HDMI Receiver. + + To compile this driver as a module, choose M here: the + module will be called adv7604. + +config VIDEO_BT819 + tristate "BT819A VideoStream decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for BT819A video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt819. + +config VIDEO_BT856 + tristate "BT856 VideoStream decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for BT856 video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt856. + +config VIDEO_BT866 + tristate "BT866 VideoStream decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for BT866 video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt866. + +config VIDEO_KS0127 + tristate "KS0127 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for KS0127 video decoder. + + This chip is used on AverMedia AVS6EYES Zoran-based MJPEG + cards. + + To compile this driver as a module, choose M here: the + module will be called ks0127. + +config VIDEO_SAA7110 + tristate "Philips SAA7110 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7110 video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa7110. + +config VIDEO_SAA711X + tristate "Philips SAA7111/3/4/5 video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7111/3/4/5 video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa7115. + +config VIDEO_SAA7191 + tristate "Philips SAA7191 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7191 video decoder. + + To compile this driver as a module, choose M here: the + module will be called saa7191. + +config VIDEO_TVP514X + tristate "Texas Instruments TVP514x video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 + decoder. It is currently working with the TI OMAP3 camera + controller. + + To compile this driver as a module, choose M here: the + module will be called tvp514x. + +config VIDEO_TVP5150 + tristate "Texas Instruments TVP5150 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Texas Instruments TVP5150 video decoder. + + To compile this driver as a module, choose M here: the + module will be called tvp5150. + +config VIDEO_TVP7002 + tristate "Texas Instruments TVP7002 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Texas Instruments TVP7002 video decoder. + + To compile this driver as a module, choose M here: the + module will be called tvp7002. + +config VIDEO_VPX3220 + tristate "vpx3220a, vpx3216b & vpx3214c video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for VPX322x video decoders. + + To compile this driver as a module, choose M here: the + module will be called vpx3220. + +comment "Video and audio decoders" + +config VIDEO_SAA717X + tristate "Philips SAA7171/3/4 audio/video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7171/3/4 audio/video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa717x. + +source "drivers/media/i2c/cx25840/Kconfig" + +comment "MPEG video encoders" + +config VIDEO_CX2341X + tristate "Conexant CX2341x MPEG encoders" + depends on VIDEO_V4L2 + ---help--- + Support for the Conexant CX23416 MPEG encoders + and CX23415 MPEG encoder/decoders. + + This module currently supports the encoding functions only. + + To compile this driver as a module, choose M here: the + module will be called cx2341x. + +comment "Video encoders" + +config VIDEO_SAA7127 + tristate "Philips SAA7127/9 digital video encoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7127/9 digital video encoders. + + To compile this driver as a module, choose M here: the + module will be called saa7127. + +config VIDEO_SAA7185 + tristate "Philips SAA7185 video encoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7185 video encoder. + + To compile this driver as a module, choose M here: the + module will be called saa7185. + +config VIDEO_ADV7170 + tristate "Analog Devices ADV7170 video encoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7170 video encoder driver + + To compile this driver as a module, choose M here: the + module will be called adv7170. + +config VIDEO_ADV7175 + tristate "Analog Devices ADV7175 video encoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7175 video encoder driver + + To compile this driver as a module, choose M here: the + module will be called adv7175. + +config VIDEO_ADV7343 + tristate "ADV7343 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based ADV7343 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7343. + +config VIDEO_ADV7393 + tristate "ADV7393 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based ADV7393 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7393. + +config VIDEO_AD9389B + tristate "Analog Devices AD9389B encoder" + depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API + ---help--- + Support for the Analog Devices AD9389B video encoder. + + This is a Analog Devices HDMI transmitter. + + To compile this driver as a module, choose M here: the + module will be called ad9389b. + +config VIDEO_AK881X + tristate "AK8813/AK8814 video encoders" + depends on I2C + help + Video output driver for AKM AK8813 and AK8814 TV encoders + +comment "Camera sensor devices" + +config VIDEO_APTINA_PLL + tristate + +config VIDEO_SMIAPP_PLL + tristate + +config VIDEO_OV7670 + tristate "OmniVision OV7670 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the OmniVision + OV7670 VGA camera. It currently only works with the M88ALP01 + controller. + +config VIDEO_VS6624 + tristate "ST VS6624 sensor support" + depends on VIDEO_V4L2 && I2C + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the ST VS6624 + camera. + + To compile this driver as a module, choose M here: the + module will be called vs6624. + +config VIDEO_MT9M032 + tristate "MT9M032 camera sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + select VIDEO_APTINA_PLL + ---help--- + This driver supports MT9M032 camera sensors from Aptina, monochrome + models only. + +config VIDEO_MT9P031 + tristate "Aptina MT9P031 support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + select VIDEO_APTINA_PLL + ---help--- + This is a Video4Linux2 sensor-level driver for the Aptina + (Micron) mt9p031 5 Mpixel camera. + +config VIDEO_MT9T001 + tristate "Aptina MT9T001 support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the Aptina + (Micron) mt0t001 3 Mpixel camera. + +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + +config VIDEO_MT9V032 + tristate "Micron MT9V032 sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + MT9V032 752x480 CMOS sensor. + +config VIDEO_TCM825X + tristate "TCM825x camera sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a driver for the Toshiba TCM825x VGA camera sensor. + It is used for example in Nokia N800. + +config VIDEO_SR030PC30 + tristate "Siliconfile SR030PC30 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This driver supports SR030PC30 VGA camera from Siliconfile + +config VIDEO_NOON010PC30 + tristate "Siliconfile NOON010PC30 sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This driver supports NOON010PC30 CIF camera from Siliconfile + +source "drivers/media/i2c/m5mols/Kconfig" + +config VIDEO_S5K6AA + tristate "Samsung S5K6AAFX sensor support" + depends on MEDIA_CAMERA_SUPPORT + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M + camera sensor with an embedded SoC image signal processor. + +config VIDEO_S5K4ECGX + tristate "Samsung S5K4ECGX sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M + camera sensor with an embedded SoC image signal processor. + +source "drivers/media/i2c/smiapp/Kconfig" + +comment "Flash devices" + +config VIDEO_ADP1653 + tristate "ADP1653 flash support" + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a driver for the ADP1653 flash controller. It is used for + example in Nokia N900. + +config VIDEO_AS3645A + tristate "AS3645A flash driver support" + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a driver for the AS3645A and LM3555 flash controllers. It has + build in control for flash, torch and indicator LEDs. + +comment "Video improvement chips" + +config VIDEO_UPD64031A + tristate "NEC Electronics uPD64031A Ghost Reduction" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the NEC Electronics uPD64031A Ghost Reduction + video chip. It is most often found in NTSC TV cards made for + Japan and is used to reduce the 'ghosting' effect that can + be present in analog TV broadcasts. + + To compile this driver as a module, choose M here: the + module will be called upd64031a. + +config VIDEO_UPD64083 + tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the NEC Electronics uPD64083 3-Dimensional Y/C + separation video chip. It is used to improve the quality of + the colors of a composite signal. + + To compile this driver as a module, choose M here: the + module will be called upd64083. + +comment "Miscelaneous helper chips" + +config VIDEO_THS7303 + tristate "THS7303 Video Amplifier" + depends on I2C + help + Support for TI THS7303 video amplifier + + To compile this driver as a module, choose M here: the + module will be called ths7303. + +config VIDEO_M52790 + tristate "Mitsubishi M52790 A/V switch" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Mitsubishi M52790 A/V switch. + + To compile this driver as a module, choose M here: the + module will be called m52790. +endmenu + +menu "Sensors used on soc_camera driver" + +if SOC_CAMERA + source "drivers/media/i2c/soc_camera/Kconfig" +endif + +endmenu + +endif diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..b1d62dfd49b8dc04b2f46c937fea1b336f3a8210 --- /dev/null +++ b/drivers/media/i2c/Makefile @@ -0,0 +1,67 @@ +msp3400-objs := msp3400-driver.o msp3400-kthreads.o +obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o + +obj-$(CONFIG_VIDEO_SMIAPP) += smiapp/ +obj-$(CONFIG_VIDEO_CX25840) += cx25840/ +obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/ +obj-y += soc_camera/ + +obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o +obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o +obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o +obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o +obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o +obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o +obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o +obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o +obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o +obj-$(CONFIG_VIDEO_SAA717X) += saa717x.o +obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o +obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o +obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o +obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o +obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o +obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o +obj-$(CONFIG_VIDEO_ADV7183) += adv7183.o +obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o +obj-$(CONFIG_VIDEO_ADV7393) += adv7393.o +obj-$(CONFIG_VIDEO_ADV7604) += adv7604.o +obj-$(CONFIG_VIDEO_AD9389B) += ad9389b.o +obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o +obj-$(CONFIG_VIDEO_VS6624) += vs6624.o +obj-$(CONFIG_VIDEO_BT819) += bt819.o +obj-$(CONFIG_VIDEO_BT856) += bt856.o +obj-$(CONFIG_VIDEO_BT866) += bt866.o +obj-$(CONFIG_VIDEO_KS0127) += ks0127.o +obj-$(CONFIG_VIDEO_THS7303) += ths7303.o +obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o +obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o +obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o +obj-$(CONFIG_VIDEO_CS5345) += cs5345.o +obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o +obj-$(CONFIG_VIDEO_M52790) += m52790.o +obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o +obj-$(CONFIG_VIDEO_WM8775) += wm8775.o +obj-$(CONFIG_VIDEO_WM8739) += wm8739.o +obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o +obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o +obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o +obj-$(CONFIG_VIDEO_OV7670) += ov7670.o +obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o +obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o +obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o +obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o +obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o +obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o +obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o +obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o +obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o +obj-$(CONFIG_VIDEO_S5K4ECGX) += s5k4ecgx.o +obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o +obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o +obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o +obj-$(CONFIG_VIDEO_BTCX) += btcx-risc.o +obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o +obj-$(CONFIG_VIDEO_AK881X) += ak881x.o +obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o diff --git a/drivers/media/i2c/ad9389b.c b/drivers/media/i2c/ad9389b.c new file mode 100644 index 0000000000000000000000000000000000000000..c2886b6a727d66528fe9d1e724e8fc4d632faa02 --- /dev/null +++ b/drivers/media/i2c/ad9389b.c @@ -0,0 +1,1328 @@ +/* + * Analog Devices AD9389B/AD9889B video encoder driver + * + * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/* + * References (c = chapter, p = page): + * REF_01 - Analog Devices, Programming Guide, AD9889B/AD9389B, + * HDMI Transitter, Rev. A, October 2010 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)"); + +MODULE_DESCRIPTION("Analog Devices AD9389B/AD9889B video encoder driver"); +MODULE_AUTHOR("Hans Verkuil "); +MODULE_AUTHOR("Martin Bugge "); +MODULE_LICENSE("GPL"); + +#define MASK_AD9389B_EDID_RDY_INT 0x04 +#define MASK_AD9389B_MSEN_INT 0x40 +#define MASK_AD9389B_HPD_INT 0x80 + +#define MASK_AD9389B_HPD_DETECT 0x40 +#define MASK_AD9389B_MSEN_DETECT 0x20 +#define MASK_AD9389B_EDID_RDY 0x10 + +#define EDID_MAX_RETRIES (8) +#define EDID_DELAY 250 +#define EDID_MAX_SEGM 8 + +/* +********************************************************************** +* +* Arrays with configuration parameters for the AD9389B +* +********************************************************************** +*/ + +struct i2c_reg_value { + u8 reg; + u8 value; +}; + +struct ad9389b_state_edid { + /* total number of blocks */ + u32 blocks; + /* Number of segments read */ + u32 segments; + u8 data[EDID_MAX_SEGM * 256]; + /* Number of EDID read retries left */ + unsigned read_retries; +}; + +struct ad9389b_state { + struct ad9389b_platform_data pdata; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_ctrl_handler hdl; + int chip_revision; + /* Is the ad9389b powered on? */ + bool power_on; + /* Did we receive hotplug and rx-sense signals? */ + bool have_monitor; + /* timings from s_dv_timings */ + struct v4l2_dv_timings dv_timings; + /* controls */ + struct v4l2_ctrl *hdmi_mode_ctrl; + struct v4l2_ctrl *hotplug_ctrl; + struct v4l2_ctrl *rx_sense_ctrl; + struct v4l2_ctrl *have_edid0_ctrl; + struct v4l2_ctrl *rgb_quantization_range_ctrl; + struct i2c_client *edid_i2c_client; + struct ad9389b_state_edid edid; + /* Running counter of the number of detected EDIDs (for debugging) */ + unsigned edid_detect_counter; + struct workqueue_struct *work_queue; + struct delayed_work edid_handler; /* work entry */ +}; + +static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd); +static bool ad9389b_check_edid_status(struct v4l2_subdev *sd); +static void ad9389b_setup(struct v4l2_subdev *sd); +static int ad9389b_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq); +static int ad9389b_s_clock_freq(struct v4l2_subdev *sd, u32 freq); + +static inline struct ad9389b_state *get_ad9389b_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ad9389b_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct ad9389b_state, hdl)->sd; +} + +/* ------------------------ I2C ----------------------------------------------- */ + +static int ad9389b_rd(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int ad9389b_wr(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + int i; + + for (i = 0; i < 3; i++) { + ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret == 0) + return 0; + } + v4l2_err(sd, "I2C Write Problem\n"); + return ret; +} + +/* To set specific bits in the register, a clear-mask is given (to be AND-ed), + and then the value-mask (to be OR-ed). */ +static inline void ad9389b_wr_and_or(struct v4l2_subdev *sd, u8 reg, + u8 clr_mask, u8 val_mask) +{ + ad9389b_wr(sd, reg, (ad9389b_rd(sd, reg) & clr_mask) | val_mask); +} + +static void ad9389b_edid_rd(struct v4l2_subdev *sd, u16 len, u8 *buf) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + int i; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + for (i = 0; i < len; i++) + buf[i] = i2c_smbus_read_byte_data(state->edid_i2c_client, i); +} + +static inline bool ad9389b_have_hotplug(struct v4l2_subdev *sd) +{ + return ad9389b_rd(sd, 0x42) & MASK_AD9389B_HPD_DETECT; +} + +static inline bool ad9389b_have_rx_sense(struct v4l2_subdev *sd) +{ + return ad9389b_rd(sd, 0x42) & MASK_AD9389B_MSEN_DETECT; +} + +static void ad9389b_csc_conversion_mode(struct v4l2_subdev *sd, u8 mode) +{ + ad9389b_wr_and_or(sd, 0x17, 0xe7, (mode & 0x3)<<3); + ad9389b_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5); +} + +static void ad9389b_csc_coeff(struct v4l2_subdev *sd, + u16 A1, u16 A2, u16 A3, u16 A4, + u16 B1, u16 B2, u16 B3, u16 B4, + u16 C1, u16 C2, u16 C3, u16 C4) +{ + /* A */ + ad9389b_wr_and_or(sd, 0x18, 0xe0, A1>>8); + ad9389b_wr(sd, 0x19, A1); + ad9389b_wr_and_or(sd, 0x1A, 0xe0, A2>>8); + ad9389b_wr(sd, 0x1B, A2); + ad9389b_wr_and_or(sd, 0x1c, 0xe0, A3>>8); + ad9389b_wr(sd, 0x1d, A3); + ad9389b_wr_and_or(sd, 0x1e, 0xe0, A4>>8); + ad9389b_wr(sd, 0x1f, A4); + + /* B */ + ad9389b_wr_and_or(sd, 0x20, 0xe0, B1>>8); + ad9389b_wr(sd, 0x21, B1); + ad9389b_wr_and_or(sd, 0x22, 0xe0, B2>>8); + ad9389b_wr(sd, 0x23, B2); + ad9389b_wr_and_or(sd, 0x24, 0xe0, B3>>8); + ad9389b_wr(sd, 0x25, B3); + ad9389b_wr_and_or(sd, 0x26, 0xe0, B4>>8); + ad9389b_wr(sd, 0x27, B4); + + /* C */ + ad9389b_wr_and_or(sd, 0x28, 0xe0, C1>>8); + ad9389b_wr(sd, 0x29, C1); + ad9389b_wr_and_or(sd, 0x2A, 0xe0, C2>>8); + ad9389b_wr(sd, 0x2B, C2); + ad9389b_wr_and_or(sd, 0x2C, 0xe0, C3>>8); + ad9389b_wr(sd, 0x2D, C3); + ad9389b_wr_and_or(sd, 0x2E, 0xe0, C4>>8); + ad9389b_wr(sd, 0x2F, C4); +} + +static void ad9389b_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable) +{ + if (enable) { + u8 csc_mode = 0; + + ad9389b_csc_conversion_mode(sd, csc_mode); + ad9389b_csc_coeff(sd, + 4096-564, 0, 0, 256, + 0, 4096-564, 0, 256, + 0, 0, 4096-564, 256); + /* enable CSC */ + ad9389b_wr_and_or(sd, 0x3b, 0xfe, 0x1); + /* AVI infoframe: Limited range RGB (16-235) */ + ad9389b_wr_and_or(sd, 0xcd, 0xf9, 0x02); + } else { + /* disable CSC */ + ad9389b_wr_and_or(sd, 0x3b, 0xfe, 0x0); + /* AVI infoframe: Full range RGB (0-255) */ + ad9389b_wr_and_or(sd, 0xcd, 0xf9, 0x04); + } +} + +static void ad9389b_set_IT_content_AVI_InfoFrame(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) { + /* CEA format, not IT */ + ad9389b_wr_and_or(sd, 0xcd, 0xbf, 0x00); + } else { + /* IT format */ + ad9389b_wr_and_or(sd, 0xcd, 0xbf, 0x40); + } +} + +static int ad9389b_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + switch (ctrl->val) { + case V4L2_DV_RGB_RANGE_AUTO: + /* automatic */ + if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) { + /* cea format, RGB limited range (16-235) */ + ad9389b_csc_rgb_full2limit(sd, true); + } else { + /* not cea format, RGB full range (0-255) */ + ad9389b_csc_rgb_full2limit(sd, false); + } + break; + case V4L2_DV_RGB_RANGE_LIMITED: + /* RGB limited range (16-235) */ + ad9389b_csc_rgb_full2limit(sd, true); + break; + case V4L2_DV_RGB_RANGE_FULL: + /* RGB full range (0-255) */ + ad9389b_csc_rgb_full2limit(sd, false); + break; + default: + return -EINVAL; + } + return 0; +} + +static void ad9389b_set_manual_pll_gear(struct v4l2_subdev *sd, u32 pixelclock) +{ + u8 gear; + + /* Workaround for TMDS PLL problem + * The TMDS PLL in AD9389b change gear when the chip is heated above a + * certain temperature. The output is disabled when the PLL change gear + * so the monitor has to lock on the signal again. A workaround for + * this is to use the manual PLL gears. This is a solution from Analog + * Devices that is not documented in the datasheets. + * 0x98 [7] = enable manual gearing. 0x98 [6:4] = gear + * + * The pixel frequency ranges are based on readout of the gear the + * automatic gearing selects for different pixel clocks + * (read from 0x9e [3:1]). + */ + + if (pixelclock > 140000000) + gear = 0xc0; /* 4th gear */ + else if (pixelclock > 117000000) + gear = 0xb0; /* 3rd gear */ + else if (pixelclock > 87000000) + gear = 0xa0; /* 2nd gear */ + else if (pixelclock > 60000000) + gear = 0x90; /* 1st gear */ + else + gear = 0x80; /* 0th gear */ + + ad9389b_wr_and_or(sd, 0x98, 0x0f, gear); +} + +/* ------------------------------ CTRL OPS ------------------------------ */ + +static int ad9389b_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct ad9389b_state *state = get_ad9389b_state(sd); + + v4l2_dbg(1, debug, sd, + "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val); + + if (state->hdmi_mode_ctrl == ctrl) { + /* Set HDMI or DVI-D */ + ad9389b_wr_and_or(sd, 0xaf, 0xfd, + ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00); + return 0; + } + if (state->rgb_quantization_range_ctrl == ctrl) + return ad9389b_set_rgb_quantization_mode(sd, ctrl); + return -EINVAL; +} + +static const struct v4l2_ctrl_ops ad9389b_ctrl_ops = { + .s_ctrl = ad9389b_s_ctrl, +}; + +/* ---------------------------- CORE OPS ------------------------------------------- */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ad9389b_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = ad9389b_rd(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int ad9389b_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + ad9389b_wr(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static int ad9389b_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_AD9389B, 0); +} + +static int ad9389b_log_status(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + struct ad9389b_state_edid *edid = &state->edid; + + static const char * const states[] = { + "in reset", + "reading EDID", + "idle", + "initializing HDCP", + "HDCP enabled", + "initializing HDCP repeater", + "6", "7", "8", "9", "A", "B", "C", "D", "E", "F" + }; + static const char * const errors[] = { + "no error", + "bad receiver BKSV", + "Ri mismatch", + "Pj mismatch", + "i2c error", + "timed out", + "max repeater cascade exceeded", + "hash check failed", + "too many devices", + "9", "A", "B", "C", "D", "E", "F" + }; + + u8 manual_gear; + + v4l2_info(sd, "chip revision %d\n", state->chip_revision); + v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off"); + v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n", + (ad9389b_rd(sd, 0x42) & MASK_AD9389B_HPD_DETECT) ? + "detected" : "no", + (ad9389b_rd(sd, 0x42) & MASK_AD9389B_MSEN_DETECT) ? + "detected" : "no", + edid->segments ? "found" : "no", edid->blocks); + if (state->have_monitor) { + v4l2_info(sd, "%s output %s\n", + (ad9389b_rd(sd, 0xaf) & 0x02) ? + "HDMI" : "DVI-D", + (ad9389b_rd(sd, 0xa1) & 0x3c) ? + "disabled" : "enabled"); + } + v4l2_info(sd, "ad9389b: %s\n", (ad9389b_rd(sd, 0xb8) & 0x40) ? + "encrypted" : "no encryption"); + v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n", + states[ad9389b_rd(sd, 0xc8) & 0xf], + errors[ad9389b_rd(sd, 0xc8) >> 4], + state->edid_detect_counter, + ad9389b_rd(sd, 0x94), ad9389b_rd(sd, 0x96)); + manual_gear = ad9389b_rd(sd, 0x98) & 0x80; + v4l2_info(sd, "ad9389b: RGB quantization: %s range\n", + ad9389b_rd(sd, 0x3b) & 0x01 ? "limited" : "full"); + v4l2_info(sd, "ad9389b: %s gear %d\n", + manual_gear ? "manual" : "automatic", + manual_gear ? ((ad9389b_rd(sd, 0x98) & 0x70) >> 4) : + ((ad9389b_rd(sd, 0x9e) & 0x0e) >> 1)); + if (state->have_monitor) { + if (ad9389b_rd(sd, 0xaf) & 0x02) { + /* HDMI only */ + u8 manual_cts = ad9389b_rd(sd, 0x0a) & 0x80; + u32 N = (ad9389b_rd(sd, 0x01) & 0xf) << 16 | + ad9389b_rd(sd, 0x02) << 8 | + ad9389b_rd(sd, 0x03); + u8 vic_detect = ad9389b_rd(sd, 0x3e) >> 2; + u8 vic_sent = ad9389b_rd(sd, 0x3d) & 0x3f; + u32 CTS; + + if (manual_cts) + CTS = (ad9389b_rd(sd, 0x07) & 0xf) << 16 | + ad9389b_rd(sd, 0x08) << 8 | + ad9389b_rd(sd, 0x09); + else + CTS = (ad9389b_rd(sd, 0x04) & 0xf) << 16 | + ad9389b_rd(sd, 0x05) << 8 | + ad9389b_rd(sd, 0x06); + N = (ad9389b_rd(sd, 0x01) & 0xf) << 16 | + ad9389b_rd(sd, 0x02) << 8 | + ad9389b_rd(sd, 0x03); + + v4l2_info(sd, "ad9389b: CTS %s mode: N %d, CTS %d\n", + manual_cts ? "manual" : "automatic", N, CTS); + + v4l2_info(sd, "ad9389b: VIC: detected %d, sent %d\n", + vic_detect, vic_sent); + } + } + if (state->dv_timings.type == V4L2_DV_BT_656_1120) { + struct v4l2_bt_timings *bt = bt = &state->dv_timings.bt; + u32 frame_width = bt->width + bt->hfrontporch + + bt->hsync + bt->hbackporch; + u32 frame_height = bt->height + bt->vfrontporch + + bt->vsync + bt->vbackporch; + u32 frame_size = frame_width * frame_height; + + v4l2_info(sd, "timings: %ux%u%s%u (%ux%u). Pix freq. = %u Hz. Polarities = 0x%x\n", + bt->width, bt->height, bt->interlaced ? "i" : "p", + frame_size > 0 ? (unsigned)bt->pixelclock / frame_size : 0, + frame_width, frame_height, + (unsigned)bt->pixelclock, bt->polarities); + } else { + v4l2_info(sd, "no timings set\n"); + } + return 0; +} + +/* Power up/down ad9389b */ +static int ad9389b_s_power(struct v4l2_subdev *sd, int on) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + struct ad9389b_platform_data *pdata = &state->pdata; + const int retries = 20; + int i; + + v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off"); + + state->power_on = on; + + if (!on) { + /* Power down */ + ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x40); + return true; + } + + /* Power up */ + /* The ad9389b does not always come up immediately. + Retry multiple times. */ + for (i = 0; i < retries; i++) { + ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x0); + if ((ad9389b_rd(sd, 0x41) & 0x40) == 0) + break; + ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x40); + msleep(10); + } + if (i == retries) { + v4l2_dbg(1, debug, sd, "failed to powerup the ad9389b\n"); + ad9389b_s_power(sd, 0); + return false; + } + if (i > 1) + v4l2_dbg(1, debug, sd, + "needed %d retries to powerup the ad9389b\n", i); + + /* Select chip: AD9389B */ + ad9389b_wr_and_or(sd, 0xba, 0xef, 0x10); + + /* Reserved registers that must be set according to REF_01 p. 11*/ + ad9389b_wr_and_or(sd, 0x98, 0xf0, 0x07); + ad9389b_wr(sd, 0x9c, 0x38); + ad9389b_wr_and_or(sd, 0x9d, 0xfc, 0x01); + + /* Differential output drive strength */ + if (pdata->diff_data_drive_strength > 0) + ad9389b_wr(sd, 0xa2, pdata->diff_data_drive_strength); + else + ad9389b_wr(sd, 0xa2, 0x87); + + if (pdata->diff_clk_drive_strength > 0) + ad9389b_wr(sd, 0xa3, pdata->diff_clk_drive_strength); + else + ad9389b_wr(sd, 0xa3, 0x87); + + ad9389b_wr(sd, 0x0a, 0x01); + ad9389b_wr(sd, 0xbb, 0xff); + + /* Set number of attempts to read the EDID */ + ad9389b_wr(sd, 0xc9, 0xf); + return true; +} + +/* Enable interrupts */ +static void ad9389b_set_isr(struct v4l2_subdev *sd, bool enable) +{ + u8 irqs = MASK_AD9389B_HPD_INT | MASK_AD9389B_MSEN_INT; + u8 irqs_rd; + int retries = 100; + + /* The datasheet says that the EDID ready interrupt should be + disabled if there is no hotplug. */ + if (!enable) + irqs = 0; + else if (ad9389b_have_hotplug(sd)) + irqs |= MASK_AD9389B_EDID_RDY_INT; + + /* + * This i2c write can fail (approx. 1 in 1000 writes). But it + * is essential that this register is correct, so retry it + * multiple times. + * + * Note that the i2c write does not report an error, but the readback + * clearly shows the wrong value. + */ + do { + ad9389b_wr(sd, 0x94, irqs); + irqs_rd = ad9389b_rd(sd, 0x94); + } while (retries-- && irqs_rd != irqs); + + if (irqs_rd != irqs) + v4l2_err(sd, "Could not set interrupts: hw failure?\n"); +} + +/* Interrupt handler */ +static int ad9389b_isr(struct v4l2_subdev *sd, u32 status, bool *handled) +{ + u8 irq_status; + + /* disable interrupts to prevent a race condition */ + ad9389b_set_isr(sd, false); + irq_status = ad9389b_rd(sd, 0x96); + /* clear detected interrupts */ + ad9389b_wr(sd, 0x96, irq_status); + + if (irq_status & (MASK_AD9389B_HPD_INT | MASK_AD9389B_MSEN_INT)) + ad9389b_check_monitor_present_status(sd); + if (irq_status & MASK_AD9389B_EDID_RDY_INT) + ad9389b_check_edid_status(sd); + + /* enable interrupts */ + ad9389b_set_isr(sd, true); + *handled = true; + return 0; +} + +static const struct v4l2_subdev_core_ops ad9389b_core_ops = { + .log_status = ad9389b_log_status, + .g_chip_ident = ad9389b_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ad9389b_g_register, + .s_register = ad9389b_s_register, +#endif + .s_power = ad9389b_s_power, + .interrupt_service_routine = ad9389b_isr, +}; + +/* ------------------------------ PAD OPS ------------------------------ */ + +static int ad9389b_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + if (edid->pad != 0) + return -EINVAL; + if (edid->blocks == 0 || edid->blocks > 256) + return -EINVAL; + if (!edid->edid) + return -EINVAL; + if (!state->edid.segments) { + v4l2_dbg(1, debug, sd, "EDID segment 0 not found\n"); + return -ENODATA; + } + if (edid->start_block >= state->edid.segments * 2) + return -E2BIG; + if (edid->blocks + edid->start_block >= state->edid.segments * 2) + edid->blocks = state->edid.segments * 2 - edid->start_block; + memcpy(edid->edid, &state->edid.data[edid->start_block * 128], + 128 * edid->blocks); + return 0; +} + +static const struct v4l2_subdev_pad_ops ad9389b_pad_ops = { + .get_edid = ad9389b_get_edid, +}; + +/* ------------------------------ VIDEO OPS ------------------------------ */ + +/* Enable/disable ad9389b output */ +static int ad9389b_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); + + ad9389b_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c)); + if (enable) { + ad9389b_check_monitor_present_status(sd); + } else { + ad9389b_s_power(sd, 0); + state->have_monitor = false; + } + return 0; +} + +static const struct v4l2_dv_timings ad9389b_timings[] = { + V4L2_DV_BT_CEA_720X480P59_94, + V4L2_DV_BT_CEA_720X576P50, + V4L2_DV_BT_CEA_1280X720P24, + V4L2_DV_BT_CEA_1280X720P25, + V4L2_DV_BT_CEA_1280X720P30, + V4L2_DV_BT_CEA_1280X720P50, + V4L2_DV_BT_CEA_1280X720P60, + V4L2_DV_BT_CEA_1920X1080P24, + V4L2_DV_BT_CEA_1920X1080P25, + V4L2_DV_BT_CEA_1920X1080P30, + V4L2_DV_BT_CEA_1920X1080P50, + V4L2_DV_BT_CEA_1920X1080P60, + + V4L2_DV_BT_DMT_640X350P85, + V4L2_DV_BT_DMT_640X400P85, + V4L2_DV_BT_DMT_720X400P85, + V4L2_DV_BT_DMT_640X480P60, + V4L2_DV_BT_DMT_640X480P72, + V4L2_DV_BT_DMT_640X480P75, + V4L2_DV_BT_DMT_640X480P85, + V4L2_DV_BT_DMT_800X600P56, + V4L2_DV_BT_DMT_800X600P60, + V4L2_DV_BT_DMT_800X600P72, + V4L2_DV_BT_DMT_800X600P75, + V4L2_DV_BT_DMT_800X600P85, + V4L2_DV_BT_DMT_848X480P60, + V4L2_DV_BT_DMT_1024X768P60, + V4L2_DV_BT_DMT_1024X768P70, + V4L2_DV_BT_DMT_1024X768P75, + V4L2_DV_BT_DMT_1024X768P85, + V4L2_DV_BT_DMT_1152X864P75, + V4L2_DV_BT_DMT_1280X768P60_RB, + V4L2_DV_BT_DMT_1280X768P60, + V4L2_DV_BT_DMT_1280X768P75, + V4L2_DV_BT_DMT_1280X768P85, + V4L2_DV_BT_DMT_1280X800P60_RB, + V4L2_DV_BT_DMT_1280X800P60, + V4L2_DV_BT_DMT_1280X800P75, + V4L2_DV_BT_DMT_1280X800P85, + V4L2_DV_BT_DMT_1280X960P60, + V4L2_DV_BT_DMT_1280X960P85, + V4L2_DV_BT_DMT_1280X1024P60, + V4L2_DV_BT_DMT_1280X1024P75, + V4L2_DV_BT_DMT_1280X1024P85, + V4L2_DV_BT_DMT_1360X768P60, + V4L2_DV_BT_DMT_1400X1050P60_RB, + V4L2_DV_BT_DMT_1400X1050P60, + V4L2_DV_BT_DMT_1400X1050P75, + V4L2_DV_BT_DMT_1400X1050P85, + V4L2_DV_BT_DMT_1440X900P60_RB, + V4L2_DV_BT_DMT_1440X900P60, + V4L2_DV_BT_DMT_1600X1200P60, + V4L2_DV_BT_DMT_1680X1050P60_RB, + V4L2_DV_BT_DMT_1680X1050P60, + V4L2_DV_BT_DMT_1792X1344P60, + V4L2_DV_BT_DMT_1856X1392P60, + V4L2_DV_BT_DMT_1920X1200P60_RB, + V4L2_DV_BT_DMT_1366X768P60, + V4L2_DV_BT_DMT_1920X1080P60, + {}, +}; + +static int ad9389b_s_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + int i; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + /* quick sanity check */ + if (timings->type != V4L2_DV_BT_656_1120) + return -EINVAL; + + if (timings->bt.interlaced) + return -EINVAL; + if (timings->bt.pixelclock < 27000000 || + timings->bt.pixelclock > 170000000) + return -EINVAL; + + /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings + if the format is listed in ad9389b_timings[] */ + for (i = 0; ad9389b_timings[i].bt.width; i++) { + if (v4l_match_dv_timings(timings, &ad9389b_timings[i], 0)) { + *timings = ad9389b_timings[i]; + break; + } + } + + timings->bt.flags &= ~V4L2_DV_FL_REDUCED_FPS; + + /* save timings */ + state->dv_timings = *timings; + + /* update quantization range based on new dv_timings */ + ad9389b_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl); + + /* update PLL gear based on new dv_timings */ + if (state->pdata.tmds_pll_gear == AD9389B_TMDS_PLL_GEAR_SEMI_AUTOMATIC) + ad9389b_set_manual_pll_gear(sd, (u32)timings->bt.pixelclock); + + /* update AVI infoframe */ + ad9389b_set_IT_content_AVI_InfoFrame(sd); + + return 0; +} + +static int ad9389b_g_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + if (!timings) + return -EINVAL; + + *timings = state->dv_timings; + + return 0; +} + +static int ad9389b_enum_dv_timings(struct v4l2_subdev *sd, + struct v4l2_enum_dv_timings *timings) +{ + if (timings->index >= ARRAY_SIZE(ad9389b_timings)) + return -EINVAL; + + memset(timings->reserved, 0, sizeof(timings->reserved)); + timings->timings = ad9389b_timings[timings->index]; + return 0; +} + +static int ad9389b_dv_timings_cap(struct v4l2_subdev *sd, + struct v4l2_dv_timings_cap *cap) +{ + cap->type = V4L2_DV_BT_656_1120; + cap->bt.max_width = 1920; + cap->bt.max_height = 1200; + cap->bt.min_pixelclock = 27000000; + cap->bt.max_pixelclock = 170000000; + cap->bt.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | + V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT; + cap->bt.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE | + V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM; + return 0; +} + +static const struct v4l2_subdev_video_ops ad9389b_video_ops = { + .s_stream = ad9389b_s_stream, + .s_dv_timings = ad9389b_s_dv_timings, + .g_dv_timings = ad9389b_g_dv_timings, + .enum_dv_timings = ad9389b_enum_dv_timings, + .dv_timings_cap = ad9389b_dv_timings_cap, +}; + +static int ad9389b_s_audio_stream(struct v4l2_subdev *sd, int enable) +{ + v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); + + if (enable) + ad9389b_wr_and_or(sd, 0x45, 0x3f, 0x80); + else + ad9389b_wr_and_or(sd, 0x45, 0x3f, 0x40); + + return 0; +} + +static int ad9389b_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + u32 N; + + switch (freq) { + case 32000: N = 4096; break; + case 44100: N = 6272; break; + case 48000: N = 6144; break; + case 88200: N = 12544; break; + case 96000: N = 12288; break; + case 176400: N = 25088; break; + case 192000: N = 24576; break; + default: + return -EINVAL; + } + + /* Set N (used with CTS to regenerate the audio clock) */ + ad9389b_wr(sd, 0x01, (N >> 16) & 0xf); + ad9389b_wr(sd, 0x02, (N >> 8) & 0xff); + ad9389b_wr(sd, 0x03, N & 0xff); + + return 0; +} + +static int ad9389b_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + u32 i2s_sf; + + switch (freq) { + case 32000: i2s_sf = 0x30; break; + case 44100: i2s_sf = 0x00; break; + case 48000: i2s_sf = 0x20; break; + case 88200: i2s_sf = 0x80; break; + case 96000: i2s_sf = 0xa0; break; + case 176400: i2s_sf = 0xc0; break; + case 192000: i2s_sf = 0xe0; break; + default: + return -EINVAL; + } + + /* Set sampling frequency for I2S audio to 48 kHz */ + ad9389b_wr_and_or(sd, 0x15, 0xf, i2s_sf); + + return 0; +} + +static int ad9389b_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) +{ + /* TODO based on input/output/config */ + /* TODO See datasheet "Programmers guide" p. 39-40 */ + + /* Only 2 channels in use for application */ + ad9389b_wr_and_or(sd, 0x50, 0x1f, 0x20); + /* Speaker mapping */ + ad9389b_wr(sd, 0x51, 0x00); + + /* TODO Where should this be placed? */ + /* 16 bit audio word length */ + ad9389b_wr_and_or(sd, 0x14, 0xf0, 0x02); + + return 0; +} + +static const struct v4l2_subdev_audio_ops ad9389b_audio_ops = { + .s_stream = ad9389b_s_audio_stream, + .s_clock_freq = ad9389b_s_clock_freq, + .s_i2s_clock_freq = ad9389b_s_i2s_clock_freq, + .s_routing = ad9389b_s_routing, +}; + +/* --------------------- SUBDEV OPS --------------------------------------- */ + +static const struct v4l2_subdev_ops ad9389b_ops = { + .core = &ad9389b_core_ops, + .video = &ad9389b_video_ops, + .audio = &ad9389b_audio_ops, + .pad = &ad9389b_pad_ops, +}; + +/* ----------------------------------------------------------------------- */ +static void ad9389b_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, + int segment, u8 *buf) +{ + int i, j; + + if (debug < lvl) + return; + + v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment); + for (i = 0; i < 256; i += 16) { + u8 b[128]; + u8 *bp = b; + + if (i == 128) + v4l2_dbg(lvl, debug, sd, "\n"); + for (j = i; j < i + 16; j++) { + sprintf(bp, "0x%02x, ", buf[j]); + bp += 6; + } + bp[0] = '\0'; + v4l2_dbg(lvl, debug, sd, "%s\n", b); + } +} + +static void ad9389b_edid_handler(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct ad9389b_state *state = container_of(dwork, + struct ad9389b_state, edid_handler); + struct v4l2_subdev *sd = &state->sd; + struct ad9389b_edid_detect ed; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + if (ad9389b_check_edid_status(sd)) { + /* Return if we received the EDID. */ + return; + } + + if (ad9389b_have_hotplug(sd)) { + /* We must retry reading the EDID several times, it is possible + * that initially the EDID couldn't be read due to i2c errors + * (DVI connectors are particularly prone to this problem). */ + if (state->edid.read_retries) { + state->edid.read_retries--; + /* EDID read failed, trigger a retry */ + ad9389b_wr(sd, 0xc9, 0xf); + queue_delayed_work(state->work_queue, + &state->edid_handler, EDID_DELAY); + return; + } + } + + /* We failed to read the EDID, so send an event for this. */ + ed.present = false; + ed.segment = ad9389b_rd(sd, 0xc4); + v4l2_subdev_notify(sd, AD9389B_EDID_DETECT, (void *)&ed); + v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__); +} + +static void ad9389b_audio_setup(struct v4l2_subdev *sd) +{ + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + ad9389b_s_i2s_clock_freq(sd, 48000); + ad9389b_s_clock_freq(sd, 48000); + ad9389b_s_routing(sd, 0, 0, 0); +} + +/* Initial setup of AD9389b */ + +/* Configure hdmi transmitter. */ +static void ad9389b_setup(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + /* Input format: RGB 4:4:4 */ + ad9389b_wr_and_or(sd, 0x15, 0xf1, 0x0); + /* Output format: RGB 4:4:4 */ + ad9389b_wr_and_or(sd, 0x16, 0x3f, 0x0); + /* CSC fixed point: +/-2, 1st order interpolation 4:2:2 -> 4:4:4 up + conversion, Aspect ratio: 16:9 */ + ad9389b_wr_and_or(sd, 0x17, 0xe1, 0x0e); + /* Disable pixel repetition and CSC */ + ad9389b_wr_and_or(sd, 0x3b, 0x9e, 0x0); + /* Output format: RGB 4:4:4, Active Format Information is valid. */ + ad9389b_wr_and_or(sd, 0x45, 0xc7, 0x08); + /* Underscanned */ + ad9389b_wr_and_or(sd, 0x46, 0x3f, 0x80); + /* Setup video format */ + ad9389b_wr(sd, 0x3c, 0x0); + /* Active format aspect ratio: same as picure. */ + ad9389b_wr(sd, 0x47, 0x80); + /* No encryption */ + ad9389b_wr_and_or(sd, 0xaf, 0xef, 0x0); + /* Positive clk edge capture for input video clock */ + ad9389b_wr_and_or(sd, 0xba, 0x1f, 0x60); + + ad9389b_audio_setup(sd); + + v4l2_ctrl_handler_setup(&state->hdl); + + ad9389b_set_IT_content_AVI_InfoFrame(sd); +} + +static void ad9389b_notify_monitor_detect(struct v4l2_subdev *sd) +{ + struct ad9389b_monitor_detect mdt; + struct ad9389b_state *state = get_ad9389b_state(sd); + + mdt.present = state->have_monitor; + v4l2_subdev_notify(sd, AD9389B_MONITOR_DETECT, (void *)&mdt); +} + +static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + /* read hotplug and rx-sense state */ + u8 status = ad9389b_rd(sd, 0x42); + + v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n", + __func__, + status, + status & MASK_AD9389B_HPD_DETECT ? ", hotplug" : "", + status & MASK_AD9389B_MSEN_DETECT ? ", rx-sense" : ""); + + if ((status & MASK_AD9389B_HPD_DETECT) && + ((status & MASK_AD9389B_MSEN_DETECT) || state->edid.segments)) { + v4l2_dbg(1, debug, sd, + "%s: hotplug and (rx-sense or edid)\n", __func__); + if (!state->have_monitor) { + v4l2_dbg(1, debug, sd, "%s: monitor detected\n", __func__); + state->have_monitor = true; + ad9389b_set_isr(sd, true); + if (!ad9389b_s_power(sd, true)) { + v4l2_dbg(1, debug, sd, + "%s: monitor detected, powerup failed\n", __func__); + return; + } + ad9389b_setup(sd); + ad9389b_notify_monitor_detect(sd); + state->edid.read_retries = EDID_MAX_RETRIES; + queue_delayed_work(state->work_queue, + &state->edid_handler, EDID_DELAY); + } + } else if (status & MASK_AD9389B_HPD_DETECT) { + v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__); + state->edid.read_retries = EDID_MAX_RETRIES; + queue_delayed_work(state->work_queue, + &state->edid_handler, EDID_DELAY); + } else if (!(status & MASK_AD9389B_HPD_DETECT)) { + v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__); + if (state->have_monitor) { + v4l2_dbg(1, debug, sd, "%s: monitor not detected\n", __func__); + state->have_monitor = false; + ad9389b_notify_monitor_detect(sd); + } + ad9389b_s_power(sd, false); + memset(&state->edid, 0, sizeof(struct ad9389b_state_edid)); + } + + /* update read only ctrls */ + v4l2_ctrl_s_ctrl(state->hotplug_ctrl, ad9389b_have_hotplug(sd) ? 0x1 : 0x0); + v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, ad9389b_have_rx_sense(sd) ? 0x1 : 0x0); + v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0); +} + +static bool edid_block_verify_crc(u8 *edid_block) +{ + int i; + u8 sum = 0; + + for (i = 0; i < 127; i++) + sum += *(edid_block + i); + return ((255 - sum + 1) == edid_block[127]); +} + +static bool edid_segment_verify_crc(struct v4l2_subdev *sd, u32 segment) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + u32 blocks = state->edid.blocks; + u8 *data = state->edid.data; + + if (edid_block_verify_crc(&data[segment * 256])) { + if ((segment + 1) * 2 <= blocks) + return edid_block_verify_crc(&data[segment * 256 + 128]); + return true; + } + return false; +} + +static bool ad9389b_check_edid_status(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + struct ad9389b_edid_detect ed; + int segment; + u8 edidRdy = ad9389b_rd(sd, 0xc5); + + v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n", + __func__, EDID_MAX_RETRIES - state->edid.read_retries); + + if (!(edidRdy & MASK_AD9389B_EDID_RDY)) + return false; + + segment = ad9389b_rd(sd, 0xc4); + if (segment >= EDID_MAX_SEGM) { + v4l2_err(sd, "edid segment number too big\n"); + return false; + } + v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment); + ad9389b_edid_rd(sd, 256, &state->edid.data[segment * 256]); + ad9389b_dbg_dump_edid(2, debug, sd, segment, + &state->edid.data[segment * 256]); + if (segment == 0) { + state->edid.blocks = state->edid.data[0x7e] + 1; + v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", + __func__, state->edid.blocks); + } + if (!edid_segment_verify_crc(sd, segment)) { + /* edid crc error, force reread of edid segment */ + ad9389b_s_power(sd, false); + ad9389b_s_power(sd, true); + return false; + } + /* one more segment read ok */ + state->edid.segments = segment + 1; + if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) { + /* Request next EDID segment */ + v4l2_dbg(1, debug, sd, "%s: request segment %d\n", + __func__, state->edid.segments); + ad9389b_wr(sd, 0xc9, 0xf); + ad9389b_wr(sd, 0xc4, state->edid.segments); + state->edid.read_retries = EDID_MAX_RETRIES; + queue_delayed_work(state->work_queue, + &state->edid_handler, EDID_DELAY); + return false; + } + + /* report when we have all segments but report only for segment 0 */ + ed.present = true; + ed.segment = 0; + v4l2_subdev_notify(sd, AD9389B_EDID_DETECT, (void *)&ed); + state->edid_detect_counter++; + v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0); + return ed.present; +} + +/* ----------------------------------------------------------------------- */ + +static void ad9389b_init_setup(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + struct ad9389b_state_edid *edid = &state->edid; + + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + /* clear all interrupts */ + ad9389b_wr(sd, 0x96, 0xff); + + memset(edid, 0, sizeof(struct ad9389b_state_edid)); + state->have_monitor = false; + ad9389b_set_isr(sd, false); +} + +static int ad9389b_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + const struct v4l2_dv_timings dv1080p60 = V4L2_DV_BT_CEA_1920X1080P60; + struct ad9389b_state *state; + struct ad9389b_platform_data *pdata = client->dev.platform_data; + struct v4l2_ctrl_handler *hdl; + struct v4l2_subdev *sd; + int err = -EIO; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_dbg(1, debug, client, "detecting ad9389b client on address 0x%x\n", + client->addr << 1); + + state = kzalloc(sizeof(struct ad9389b_state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + /* Platform data */ + if (pdata == NULL) { + v4l_err(client, "No platform data!\n"); + err = -ENODEV; + goto err_free; + } + memcpy(&state->pdata, pdata, sizeof(state->pdata)); + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &ad9389b_ops); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + hdl = &state->hdl; + v4l2_ctrl_handler_init(hdl, 5); + + /* private controls */ + + state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops, + V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI, + 0, V4L2_DV_TX_MODE_DVI_D); + state->hdmi_mode_ctrl->is_private = true; + state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0); + state->hotplug_ctrl->is_private = true; + state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0); + state->rx_sense_ctrl->is_private = true; + state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0); + state->have_edid0_ctrl->is_private = true; + state->rgb_quantization_range_ctrl = + v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops, + V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, + 0, V4L2_DV_RGB_RANGE_AUTO); + state->rgb_quantization_range_ctrl->is_private = true; + sd->ctrl_handler = hdl; + if (hdl->error) { + err = hdl->error; + + goto err_hdl; + } + + state->pad.flags = MEDIA_PAD_FL_SINK; + err = media_entity_init(&sd->entity, 1, &state->pad, 0); + if (err) + goto err_hdl; + + state->chip_revision = ad9389b_rd(sd, 0x0); + if (state->chip_revision != 2) { + v4l2_err(sd, "chip_revision %d != 2\n", state->chip_revision); + err = -EIO; + goto err_entity; + } + v4l2_dbg(1, debug, sd, "reg 0x41 0x%x, chip version (reg 0x00) 0x%x\n", + ad9389b_rd(sd, 0x41), state->chip_revision); + + state->edid_i2c_client = i2c_new_dummy(client->adapter, (0x7e>>1)); + if (state->edid_i2c_client == NULL) { + v4l2_err(sd, "failed to register edid i2c client\n"); + goto err_entity; + } + + state->work_queue = create_singlethread_workqueue(sd->name); + if (state->work_queue == NULL) { + v4l2_err(sd, "could not create workqueue\n"); + goto err_unreg; + } + + INIT_DELAYED_WORK(&state->edid_handler, ad9389b_edid_handler); + state->dv_timings = dv1080p60; + + ad9389b_init_setup(sd); + ad9389b_set_isr(sd, true); + + v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + return 0; + +err_unreg: + i2c_unregister_device(state->edid_i2c_client); +err_entity: + media_entity_cleanup(&sd->entity); +err_hdl: + v4l2_ctrl_handler_free(&state->hdl); +err_free: + kfree(state); + return err; +} + +/* ----------------------------------------------------------------------- */ + +static int ad9389b_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ad9389b_state *state = get_ad9389b_state(sd); + + state->chip_revision = -1; + + v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + + ad9389b_s_stream(sd, false); + ad9389b_s_audio_stream(sd, false); + ad9389b_init_setup(sd); + cancel_delayed_work(&state->edid_handler); + i2c_unregister_device(state->edid_i2c_client); + destroy_workqueue(state->work_queue); + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + v4l2_ctrl_handler_free(sd->ctrl_handler); + kfree(get_ad9389b_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static struct i2c_device_id ad9389b_id[] = { + { "ad9389b", V4L2_IDENT_AD9389B }, + { "ad9889b", V4L2_IDENT_AD9389B }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad9389b_id); + +static struct i2c_driver ad9389b_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "ad9389b", + }, + .probe = ad9389b_probe, + .remove = ad9389b_remove, + .id_table = ad9389b_id, +}; + +module_i2c_driver(ad9389b_driver); diff --git a/drivers/media/video/adp1653.c b/drivers/media/i2c/adp1653.c similarity index 99% rename from drivers/media/video/adp1653.c rename to drivers/media/i2c/adp1653.c index 57e87090388d174089f68e920e72fe6752e2f884..18a38b38fcb8c9796b16549b2707c8551b6f86fa 100644 --- a/drivers/media/video/adp1653.c +++ b/drivers/media/i2c/adp1653.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/adp1653.c + * drivers/media/i2c/adp1653.c * * Copyright (C) 2008--2011 Nokia Corporation * diff --git a/drivers/media/video/adv7170.c b/drivers/media/i2c/adv7170.c similarity index 100% rename from drivers/media/video/adv7170.c rename to drivers/media/i2c/adv7170.c diff --git a/drivers/media/video/adv7175.c b/drivers/media/i2c/adv7175.c similarity index 100% rename from drivers/media/video/adv7175.c rename to drivers/media/i2c/adv7175.c diff --git a/drivers/media/video/adv7180.c b/drivers/media/i2c/adv7180.c similarity index 100% rename from drivers/media/video/adv7180.c rename to drivers/media/i2c/adv7180.c diff --git a/drivers/media/video/adv7183.c b/drivers/media/i2c/adv7183.c similarity index 100% rename from drivers/media/video/adv7183.c rename to drivers/media/i2c/adv7183.c diff --git a/drivers/media/video/adv7183_regs.h b/drivers/media/i2c/adv7183_regs.h similarity index 100% rename from drivers/media/video/adv7183_regs.h rename to drivers/media/i2c/adv7183_regs.h diff --git a/drivers/media/video/adv7343.c b/drivers/media/i2c/adv7343.c similarity index 100% rename from drivers/media/video/adv7343.c rename to drivers/media/i2c/adv7343.c diff --git a/drivers/media/video/adv7343_regs.h b/drivers/media/i2c/adv7343_regs.h similarity index 100% rename from drivers/media/video/adv7343_regs.h rename to drivers/media/i2c/adv7343_regs.h diff --git a/drivers/media/video/adv7393.c b/drivers/media/i2c/adv7393.c similarity index 100% rename from drivers/media/video/adv7393.c rename to drivers/media/i2c/adv7393.c diff --git a/drivers/media/video/adv7393_regs.h b/drivers/media/i2c/adv7393_regs.h similarity index 100% rename from drivers/media/video/adv7393_regs.h rename to drivers/media/i2c/adv7393_regs.h diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c new file mode 100644 index 0000000000000000000000000000000000000000..109bc9b12e740eec80dda9e0eb9dea30a530fb5e --- /dev/null +++ b/drivers/media/i2c/adv7604.c @@ -0,0 +1,1959 @@ +/* + * adv7604 - Analog Devices ADV7604 video decoder driver + * + * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +/* + * References (c = chapter, p = page): + * REF_01 - Analog devices, ADV7604, Register Settings Recommendations, + * Revision 2.5, June 2010 + * REF_02 - Analog devices, Register map documentation, Documentation of + * the register maps, Software manual, Rev. F, June 2010 + * REF_03 - Analog devices, ADV7604, Hardware Manual, Rev. F, August 2010 + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)"); + +MODULE_DESCRIPTION("Analog Devices ADV7604 video decoder driver"); +MODULE_AUTHOR("Hans Verkuil "); +MODULE_AUTHOR("Mats Randgaard "); +MODULE_LICENSE("GPL"); + +/* ADV7604 system clock frequency */ +#define ADV7604_fsc (28636360) + +#define DIGITAL_INPUT ((state->prim_mode == ADV7604_PRIM_MODE_HDMI_COMP) || \ + (state->prim_mode == ADV7604_PRIM_MODE_HDMI_GR)) + +/* + ********************************************************************** + * + * Arrays with configuration parameters for the ADV7604 + * + ********************************************************************** + */ +struct adv7604_state { + struct adv7604_platform_data pdata; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_ctrl_handler hdl; + enum adv7604_prim_mode prim_mode; + struct v4l2_dv_timings timings; + u8 edid[256]; + unsigned edid_blocks; + struct v4l2_fract aspect_ratio; + u32 rgb_quantization_range; + struct workqueue_struct *work_queues; + struct delayed_work delayed_work_enable_hotplug; + bool connector_hdmi; + + /* i2c clients */ + struct i2c_client *i2c_avlink; + struct i2c_client *i2c_cec; + struct i2c_client *i2c_infoframe; + struct i2c_client *i2c_esdp; + struct i2c_client *i2c_dpp; + struct i2c_client *i2c_afe; + struct i2c_client *i2c_repeater; + struct i2c_client *i2c_edid; + struct i2c_client *i2c_hdmi; + struct i2c_client *i2c_test; + struct i2c_client *i2c_cp; + struct i2c_client *i2c_vdp; + + /* controls */ + struct v4l2_ctrl *detect_tx_5v_ctrl; + struct v4l2_ctrl *analog_sampling_phase_ctrl; + struct v4l2_ctrl *free_run_color_manual_ctrl; + struct v4l2_ctrl *free_run_color_ctrl; + struct v4l2_ctrl *rgb_quantization_range_ctrl; +}; + +/* Supported CEA and DMT timings */ +static const struct v4l2_dv_timings adv7604_timings[] = { + V4L2_DV_BT_CEA_720X480P59_94, + V4L2_DV_BT_CEA_720X576P50, + V4L2_DV_BT_CEA_1280X720P24, + V4L2_DV_BT_CEA_1280X720P25, + V4L2_DV_BT_CEA_1280X720P30, + V4L2_DV_BT_CEA_1280X720P50, + V4L2_DV_BT_CEA_1280X720P60, + V4L2_DV_BT_CEA_1920X1080P24, + V4L2_DV_BT_CEA_1920X1080P25, + V4L2_DV_BT_CEA_1920X1080P30, + V4L2_DV_BT_CEA_1920X1080P50, + V4L2_DV_BT_CEA_1920X1080P60, + + V4L2_DV_BT_DMT_640X350P85, + V4L2_DV_BT_DMT_640X400P85, + V4L2_DV_BT_DMT_720X400P85, + V4L2_DV_BT_DMT_640X480P60, + V4L2_DV_BT_DMT_640X480P72, + V4L2_DV_BT_DMT_640X480P75, + V4L2_DV_BT_DMT_640X480P85, + V4L2_DV_BT_DMT_800X600P56, + V4L2_DV_BT_DMT_800X600P60, + V4L2_DV_BT_DMT_800X600P72, + V4L2_DV_BT_DMT_800X600P75, + V4L2_DV_BT_DMT_800X600P85, + V4L2_DV_BT_DMT_848X480P60, + V4L2_DV_BT_DMT_1024X768P60, + V4L2_DV_BT_DMT_1024X768P70, + V4L2_DV_BT_DMT_1024X768P75, + V4L2_DV_BT_DMT_1024X768P85, + V4L2_DV_BT_DMT_1152X864P75, + V4L2_DV_BT_DMT_1280X768P60_RB, + V4L2_DV_BT_DMT_1280X768P60, + V4L2_DV_BT_DMT_1280X768P75, + V4L2_DV_BT_DMT_1280X768P85, + V4L2_DV_BT_DMT_1280X800P60_RB, + V4L2_DV_BT_DMT_1280X800P60, + V4L2_DV_BT_DMT_1280X800P75, + V4L2_DV_BT_DMT_1280X800P85, + V4L2_DV_BT_DMT_1280X960P60, + V4L2_DV_BT_DMT_1280X960P85, + V4L2_DV_BT_DMT_1280X1024P60, + V4L2_DV_BT_DMT_1280X1024P75, + V4L2_DV_BT_DMT_1280X1024P85, + V4L2_DV_BT_DMT_1360X768P60, + V4L2_DV_BT_DMT_1400X1050P60_RB, + V4L2_DV_BT_DMT_1400X1050P60, + V4L2_DV_BT_DMT_1400X1050P75, + V4L2_DV_BT_DMT_1400X1050P85, + V4L2_DV_BT_DMT_1440X900P60_RB, + V4L2_DV_BT_DMT_1440X900P60, + V4L2_DV_BT_DMT_1600X1200P60, + V4L2_DV_BT_DMT_1680X1050P60_RB, + V4L2_DV_BT_DMT_1680X1050P60, + V4L2_DV_BT_DMT_1792X1344P60, + V4L2_DV_BT_DMT_1856X1392P60, + V4L2_DV_BT_DMT_1920X1200P60_RB, + V4L2_DV_BT_DMT_1366X768P60, + V4L2_DV_BT_DMT_1920X1080P60, + { }, +}; + +/* ----------------------------------------------------------------------- */ + +static inline struct adv7604_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7604_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7604_state, hdl)->sd; +} + +static inline unsigned hblanking(const struct v4l2_bt_timings *t) +{ + return t->hfrontporch + t->hsync + t->hbackporch; +} + +static inline unsigned htotal(const struct v4l2_bt_timings *t) +{ + return t->width + t->hfrontporch + t->hsync + t->hbackporch; +} + +static inline unsigned vblanking(const struct v4l2_bt_timings *t) +{ + return t->vfrontporch + t->vsync + t->vbackporch; +} + +static inline unsigned vtotal(const struct v4l2_bt_timings *t) +{ + return t->height + t->vfrontporch + t->vsync + t->vbackporch; +} + +/* ----------------------------------------------------------------------- */ + +static s32 adv_smbus_read_byte_data_check(struct i2c_client *client, + u8 command, bool check) +{ + union i2c_smbus_data data; + + if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BYTE_DATA, &data)) + return data.byte; + if (check) + v4l_err(client, "error reading %02x, %02x\n", + client->addr, command); + return -EIO; +} + +static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command) +{ + return adv_smbus_read_byte_data_check(client, command, true); +} + +static s32 adv_smbus_write_byte_data(struct i2c_client *client, + u8 command, u8 value) +{ + union i2c_smbus_data data; + int err; + int i; + + data.byte = value; + for (i = 0; i < 3; i++) { + err = i2c_smbus_xfer(client->adapter, client->addr, + client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_BYTE_DATA, &data); + if (!err) + break; + } + if (err < 0) + v4l_err(client, "error writing %02x, %02x, %02x\n", + client->addr, command, value); + return err; +} + +static s32 adv_smbus_write_i2c_block_data(struct i2c_client *client, + u8 command, unsigned length, const u8 *values) +{ + union i2c_smbus_data data; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + memcpy(data.block + 1, values, length); + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); +} + +/* ----------------------------------------------------------------------- */ + +static inline int io_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return adv_smbus_read_byte_data(client, reg); +} + +static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return adv_smbus_write_byte_data(client, reg, val); +} + +static inline int io_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) +{ + return io_write(sd, reg, (io_read(sd, reg) & mask) | val); +} + +static inline int avlink_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_avlink, reg); +} + +static inline int avlink_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_avlink, reg, val); +} + +static inline int cec_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_cec, reg); +} + +static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_cec, reg, val); +} + +static inline int cec_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) +{ + return cec_write(sd, reg, (cec_read(sd, reg) & mask) | val); +} + +static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_infoframe, reg); +} + +static inline int infoframe_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_infoframe, reg, val); +} + +static inline int esdp_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_esdp, reg); +} + +static inline int esdp_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_esdp, reg, val); +} + +static inline int dpp_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_dpp, reg); +} + +static inline int dpp_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_dpp, reg, val); +} + +static inline int afe_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_afe, reg); +} + +static inline int afe_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_afe, reg, val); +} + +static inline int rep_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_repeater, reg); +} + +static inline int rep_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_repeater, reg, val); +} + +static inline int rep_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) +{ + return rep_write(sd, reg, (rep_read(sd, reg) & mask) | val); +} + +static inline int edid_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_edid, reg); +} + +static inline int edid_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_edid, reg, val); +} + +static inline int edid_read_block(struct v4l2_subdev *sd, unsigned len, u8 *val) +{ + struct adv7604_state *state = to_state(sd); + struct i2c_client *client = state->i2c_edid; + u8 msgbuf0[1] = { 0 }; + u8 msgbuf1[256]; + struct i2c_msg msg[2] = { { client->addr, 0, 1, msgbuf0 }, + { client->addr, 0 | I2C_M_RD, len, msgbuf1 } + }; + + if (i2c_transfer(client->adapter, msg, 2) < 0) + return -EIO; + memcpy(val, msgbuf1, len); + return 0; +} + +static void adv7604_delayed_work_enable_hotplug(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct adv7604_state *state = container_of(dwork, struct adv7604_state, + delayed_work_enable_hotplug); + struct v4l2_subdev *sd = &state->sd; + + v4l2_dbg(2, debug, sd, "%s: enable hotplug\n", __func__); + + v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)1); +} + +static inline int edid_write_block(struct v4l2_subdev *sd, + unsigned len, const u8 *val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct adv7604_state *state = to_state(sd); + int err = 0; + int i; + + v4l2_dbg(2, debug, sd, "%s: write EDID block (%d byte)\n", __func__, len); + + v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)0); + + /* Disables I2C access to internal EDID ram from DDC port */ + rep_write_and_or(sd, 0x77, 0xf0, 0x0); + + for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX) + err = adv_smbus_write_i2c_block_data(state->i2c_edid, i, + I2C_SMBUS_BLOCK_MAX, val + i); + if (err) + return err; + + /* adv7604 calculates the checksums and enables I2C access to internal + EDID ram from DDC port. */ + rep_write_and_or(sd, 0x77, 0xf0, 0x1); + + for (i = 0; i < 1000; i++) { + if (rep_read(sd, 0x7d) & 1) + break; + mdelay(1); + } + if (i == 1000) { + v4l_err(client, "error enabling edid\n"); + return -EIO; + } + + /* enable hotplug after 100 ms */ + queue_delayed_work(state->work_queues, + &state->delayed_work_enable_hotplug, HZ / 10); + return 0; +} + +static inline int hdmi_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_hdmi, reg); +} + +static inline int hdmi_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_hdmi, reg, val); +} + +static inline int test_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_test, reg); +} + +static inline int test_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_test, reg, val); +} + +static inline int cp_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_cp, reg); +} + +static inline int cp_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_cp, reg, val); +} + +static inline int cp_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) +{ + return cp_write(sd, reg, (cp_read(sd, reg) & mask) | val); +} + +static inline int vdp_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_read_byte_data(state->i2c_vdp, reg); +} + +static inline int vdp_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7604_state *state = to_state(sd); + + return adv_smbus_write_byte_data(state->i2c_vdp, reg, val); +} + +/* ----------------------------------------------------------------------- */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static void adv7604_inv_register(struct v4l2_subdev *sd) +{ + v4l2_info(sd, "0x000-0x0ff: IO Map\n"); + v4l2_info(sd, "0x100-0x1ff: AVLink Map\n"); + v4l2_info(sd, "0x200-0x2ff: CEC Map\n"); + v4l2_info(sd, "0x300-0x3ff: InfoFrame Map\n"); + v4l2_info(sd, "0x400-0x4ff: ESDP Map\n"); + v4l2_info(sd, "0x500-0x5ff: DPP Map\n"); + v4l2_info(sd, "0x600-0x6ff: AFE Map\n"); + v4l2_info(sd, "0x700-0x7ff: Repeater Map\n"); + v4l2_info(sd, "0x800-0x8ff: EDID Map\n"); + v4l2_info(sd, "0x900-0x9ff: HDMI Map\n"); + v4l2_info(sd, "0xa00-0xaff: Test Map\n"); + v4l2_info(sd, "0xb00-0xbff: CP Map\n"); + v4l2_info(sd, "0xc00-0xcff: VDP Map\n"); +} + +static int adv7604_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->size = 1; + switch (reg->reg >> 8) { + case 0: + reg->val = io_read(sd, reg->reg & 0xff); + break; + case 1: + reg->val = avlink_read(sd, reg->reg & 0xff); + break; + case 2: + reg->val = cec_read(sd, reg->reg & 0xff); + break; + case 3: + reg->val = infoframe_read(sd, reg->reg & 0xff); + break; + case 4: + reg->val = esdp_read(sd, reg->reg & 0xff); + break; + case 5: + reg->val = dpp_read(sd, reg->reg & 0xff); + break; + case 6: + reg->val = afe_read(sd, reg->reg & 0xff); + break; + case 7: + reg->val = rep_read(sd, reg->reg & 0xff); + break; + case 8: + reg->val = edid_read(sd, reg->reg & 0xff); + break; + case 9: + reg->val = hdmi_read(sd, reg->reg & 0xff); + break; + case 0xa: + reg->val = test_read(sd, reg->reg & 0xff); + break; + case 0xb: + reg->val = cp_read(sd, reg->reg & 0xff); + break; + case 0xc: + reg->val = vdp_read(sd, reg->reg & 0xff); + break; + default: + v4l2_info(sd, "Register %03llx not supported\n", reg->reg); + adv7604_inv_register(sd); + break; + } + return 0; +} + +static int adv7604_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + switch (reg->reg >> 8) { + case 0: + io_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 1: + avlink_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 2: + cec_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 3: + infoframe_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 4: + esdp_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 5: + dpp_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 6: + afe_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 7: + rep_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 8: + edid_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 9: + hdmi_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 0xa: + test_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 0xb: + cp_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 0xc: + vdp_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + default: + v4l2_info(sd, "Register %03llx not supported\n", reg->reg); + adv7604_inv_register(sd); + break; + } + return 0; +} +#endif + +static int adv7604_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd) +{ + struct adv7604_state *state = to_state(sd); + + /* port A only */ + return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, + ((io_read(sd, 0x6f) & 0x10) >> 4)); +} + +static void configure_free_run(struct v4l2_subdev *sd, const struct v4l2_bt_timings *timings) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u32 width = htotal(timings); + u32 height = vtotal(timings); + u16 ch1_fr_ll = (((u32)timings->pixelclock / 100) > 0) ? + ((width * (ADV7604_fsc / 100)) / ((u32)timings->pixelclock / 100)) : 0; + + v4l2_dbg(2, debug, sd, "%s\n", __func__); + + cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7); /* CH1_FR_LL */ + cp_write(sd, 0x90, ch1_fr_ll & 0xff); /* CH1_FR_LL */ + cp_write(sd, 0xab, (height >> 4) & 0xff); /* CP_LCOUNT_MAX */ + cp_write(sd, 0xac, (height & 0x0f) << 4); /* CP_LCOUNT_MAX */ + /* TODO support interlaced */ + cp_write(sd, 0x91, 0x10); /* INTERLACED */ + + /* Should only be set in auto-graphics mode [REF_02 p. 91-92] */ + if ((io_read(sd, 0x00) == 0x07) && (io_read(sd, 0x01) == 0x02)) { + u16 cp_start_sav, cp_start_eav, cp_start_vbi, cp_end_vbi; + const u8 pll[2] = { + (0xc0 | ((width >> 8) & 0x1f)), + (width & 0xff) + }; + + /* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */ + /* IO-map reg. 0x16 and 0x17 should be written in sequence */ + if (adv_smbus_write_i2c_block_data(client, 0x16, 2, pll)) { + v4l2_err(sd, "writing to reg 0x16 and 0x17 failed\n"); + return; + } + + /* active video - horizontal timing */ + cp_start_sav = timings->hsync + timings->hbackporch - 4; + cp_start_eav = width - timings->hfrontporch; + cp_write(sd, 0xa2, (cp_start_sav >> 4) & 0xff); + cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) | ((cp_start_eav >> 8) & 0x0f)); + cp_write(sd, 0xa4, cp_start_eav & 0xff); + + /* active video - vertical timing */ + cp_start_vbi = height - timings->vfrontporch; + cp_end_vbi = timings->vsync + timings->vbackporch; + cp_write(sd, 0xa5, (cp_start_vbi >> 4) & 0xff); + cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) | ((cp_end_vbi >> 8) & 0xf)); + cp_write(sd, 0xa7, cp_end_vbi & 0xff); + } else { + /* reset to default values */ + io_write(sd, 0x16, 0x43); + io_write(sd, 0x17, 0x5a); + cp_write(sd, 0xa2, 0x00); + cp_write(sd, 0xa3, 0x00); + cp_write(sd, 0xa4, 0x00); + cp_write(sd, 0xa5, 0x00); + cp_write(sd, 0xa6, 0x00); + cp_write(sd, 0xa7, 0x00); + } +} + + +static void set_rgb_quantization_range(struct v4l2_subdev *sd) +{ + struct adv7604_state *state = to_state(sd); + + switch (state->rgb_quantization_range) { + case V4L2_DV_RGB_RANGE_AUTO: + /* automatic */ + if ((hdmi_read(sd, 0x05) & 0x80) || + (state->prim_mode == ADV7604_PRIM_MODE_COMP) || + (state->prim_mode == ADV7604_PRIM_MODE_RGB)) { + /* receiving HDMI or analog signal */ + io_write_and_or(sd, 0x02, 0x0f, 0xf0); + } else { + /* receiving DVI-D signal */ + + /* ADV7604 selects RGB limited range regardless of + input format (CE/IT) in automatic mode */ + if (state->timings.bt.standards & V4L2_DV_BT_STD_CEA861) { + /* RGB limited range (16-235) */ + io_write_and_or(sd, 0x02, 0x0f, 0x00); + + } else { + /* RGB full range (0-255) */ + io_write_and_or(sd, 0x02, 0x0f, 0x10); + } + } + break; + case V4L2_DV_RGB_RANGE_LIMITED: + /* RGB limited range (16-235) */ + io_write_and_or(sd, 0x02, 0x0f, 0x00); + break; + case V4L2_DV_RGB_RANGE_FULL: + /* RGB full range (0-255) */ + io_write_and_or(sd, 0x02, 0x0f, 0x10); + break; + } +} + + +static int adv7604_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct adv7604_state *state = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + cp_write(sd, 0x3c, ctrl->val); + return 0; + case V4L2_CID_CONTRAST: + cp_write(sd, 0x3a, ctrl->val); + return 0; + case V4L2_CID_SATURATION: + cp_write(sd, 0x3b, ctrl->val); + return 0; + case V4L2_CID_HUE: + cp_write(sd, 0x3d, ctrl->val); + return 0; + case V4L2_CID_DV_RX_RGB_RANGE: + state->rgb_quantization_range = ctrl->val; + set_rgb_quantization_range(sd); + return 0; + case V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE: + /* Set the analog sampling phase. This is needed to find the + best sampling phase for analog video: an application or + driver has to try a number of phases and analyze the picture + quality before settling on the best performing phase. */ + afe_write(sd, 0xc8, ctrl->val); + return 0; + case V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL: + /* Use the default blue color for free running mode, + or supply your own. */ + cp_write_and_or(sd, 0xbf, ~0x04, (ctrl->val << 2)); + return 0; + case V4L2_CID_ADV_RX_FREE_RUN_COLOR: + cp_write(sd, 0xc0, (ctrl->val & 0xff0000) >> 16); + cp_write(sd, 0xc1, (ctrl->val & 0x00ff00) >> 8); + cp_write(sd, 0xc2, (u8)(ctrl->val & 0x0000ff)); + return 0; + } + return -EINVAL; +} + +static int adv7604_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7604, 0); +} + +/* ----------------------------------------------------------------------- */ + +static inline bool no_power(struct v4l2_subdev *sd) +{ + /* Entire chip or CP powered off */ + return io_read(sd, 0x0c) & 0x24; +} + +static inline bool no_signal_tmds(struct v4l2_subdev *sd) +{ + /* TODO port B, C and D */ + return !(io_read(sd, 0x6a) & 0x10); +} + +static inline bool no_lock_tmds(struct v4l2_subdev *sd) +{ + return (io_read(sd, 0x6a) & 0xe0) != 0xe0; +} + +static inline bool no_lock_sspd(struct v4l2_subdev *sd) +{ + /* TODO channel 2 */ + return ((cp_read(sd, 0xb5) & 0xd0) != 0xd0); +} + +static inline bool no_lock_stdi(struct v4l2_subdev *sd) +{ + /* TODO channel 2 */ + return !(cp_read(sd, 0xb1) & 0x80); +} + +static inline bool no_signal(struct v4l2_subdev *sd) +{ + struct adv7604_state *state = to_state(sd); + bool ret; + + ret = no_power(sd); + + ret |= no_lock_stdi(sd); + ret |= no_lock_sspd(sd); + + if (DIGITAL_INPUT) { + ret |= no_lock_tmds(sd); + ret |= no_signal_tmds(sd); + } + + return ret; +} + +static inline bool no_lock_cp(struct v4l2_subdev *sd) +{ + /* CP has detected a non standard number of lines on the incoming + video compared to what it is configured to receive by s_dv_timings */ + return io_read(sd, 0x12) & 0x01; +} + +static int adv7604_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + struct adv7604_state *state = to_state(sd); + + *status = 0; + *status |= no_power(sd) ? V4L2_IN_ST_NO_POWER : 0; + *status |= no_signal(sd) ? V4L2_IN_ST_NO_SIGNAL : 0; + if (no_lock_cp(sd)) + *status |= DIGITAL_INPUT ? V4L2_IN_ST_NO_SYNC : V4L2_IN_ST_NO_H_LOCK; + + v4l2_dbg(1, debug, sd, "%s: status = 0x%x\n", __func__, *status); + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static void adv7604_print_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings, const char *txt, bool detailed) +{ + struct v4l2_bt_timings *bt = &timings->bt; + u32 htot, vtot; + + if (timings->type != V4L2_DV_BT_656_1120) + return; + + htot = htotal(bt); + vtot = vtotal(bt); + + v4l2_info(sd, "%s %dx%d%s%d (%dx%d)", + txt, bt->width, bt->height, bt->interlaced ? "i" : "p", + (htot * vtot) > 0 ? ((u32)bt->pixelclock / + (htot * vtot)) : 0, + htot, vtot); + + if (detailed) { + v4l2_info(sd, " horizontal: fp = %d, %ssync = %d, bp = %d\n", + bt->hfrontporch, + (bt->polarities & V4L2_DV_HSYNC_POS_POL) ? "+" : "-", + bt->hsync, bt->hbackporch); + v4l2_info(sd, " vertical: fp = %d, %ssync = %d, bp = %d\n", + bt->vfrontporch, + (bt->polarities & V4L2_DV_VSYNC_POS_POL) ? "+" : "-", + bt->vsync, bt->vbackporch); + v4l2_info(sd, " pixelclock: %lld, flags: 0x%x, standards: 0x%x\n", + bt->pixelclock, bt->flags, bt->standards); + } +} + +struct stdi_readback { + u16 bl, lcf, lcvs; + u8 hs_pol, vs_pol; + bool interlaced; +}; + +static int stdi2dv_timings(struct v4l2_subdev *sd, + struct stdi_readback *stdi, + struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + u32 hfreq = (ADV7604_fsc * 8) / stdi->bl; + u32 pix_clk; + int i; + + for (i = 0; adv7604_timings[i].bt.height; i++) { + if (vtotal(&adv7604_timings[i].bt) != stdi->lcf + 1) + continue; + if (adv7604_timings[i].bt.vsync != stdi->lcvs) + continue; + + pix_clk = hfreq * htotal(&adv7604_timings[i].bt); + + if ((pix_clk < adv7604_timings[i].bt.pixelclock + 1000000) && + (pix_clk > adv7604_timings[i].bt.pixelclock - 1000000)) { + *timings = adv7604_timings[i]; + return 0; + } + } + + if (v4l2_detect_cvt(stdi->lcf + 1, hfreq, stdi->lcvs, + (stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) | + (stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0), + timings)) + return 0; + if (v4l2_detect_gtf(stdi->lcf + 1, hfreq, stdi->lcvs, + (stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) | + (stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0), + state->aspect_ratio, timings)) + return 0; + + v4l2_dbg(2, debug, sd, "%s: No format candidate found for lcf=%d, bl = %d\n", + __func__, stdi->lcf, stdi->bl); + return -1; +} + +static int read_stdi(struct v4l2_subdev *sd, struct stdi_readback *stdi) +{ + if (no_lock_stdi(sd) || no_lock_sspd(sd)) { + v4l2_dbg(2, debug, sd, "%s: STDI and/or SSPD not locked\n", __func__); + return -1; + } + + /* read STDI */ + stdi->bl = ((cp_read(sd, 0xb1) & 0x3f) << 8) | cp_read(sd, 0xb2); + stdi->lcf = ((cp_read(sd, 0xb3) & 0x7) << 8) | cp_read(sd, 0xb4); + stdi->lcvs = cp_read(sd, 0xb3) >> 3; + stdi->interlaced = io_read(sd, 0x12) & 0x10; + + /* read SSPD */ + if ((cp_read(sd, 0xb5) & 0x03) == 0x01) { + stdi->hs_pol = ((cp_read(sd, 0xb5) & 0x10) ? + ((cp_read(sd, 0xb5) & 0x08) ? '+' : '-') : 'x'); + stdi->vs_pol = ((cp_read(sd, 0xb5) & 0x40) ? + ((cp_read(sd, 0xb5) & 0x20) ? '+' : '-') : 'x'); + } else { + stdi->hs_pol = 'x'; + stdi->vs_pol = 'x'; + } + + if (no_lock_stdi(sd) || no_lock_sspd(sd)) { + v4l2_dbg(2, debug, sd, + "%s: signal lost during readout of STDI/SSPD\n", __func__); + return -1; + } + + if (stdi->lcf < 239 || stdi->bl < 8 || stdi->bl == 0x3fff) { + v4l2_dbg(2, debug, sd, "%s: invalid signal\n", __func__); + memset(stdi, 0, sizeof(struct stdi_readback)); + return -1; + } + + v4l2_dbg(2, debug, sd, + "%s: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %chsync, %cvsync, %s\n", + __func__, stdi->lcf, stdi->bl, stdi->lcvs, + stdi->hs_pol, stdi->vs_pol, + stdi->interlaced ? "interlaced" : "progressive"); + + return 0; +} + +static int adv7604_enum_dv_timings(struct v4l2_subdev *sd, + struct v4l2_enum_dv_timings *timings) +{ + if (timings->index >= ARRAY_SIZE(adv7604_timings) - 1) + return -EINVAL; + memset(timings->reserved, 0, sizeof(timings->reserved)); + timings->timings = adv7604_timings[timings->index]; + return 0; +} + +static int adv7604_dv_timings_cap(struct v4l2_subdev *sd, + struct v4l2_dv_timings_cap *cap) +{ + struct adv7604_state *state = to_state(sd); + + cap->type = V4L2_DV_BT_656_1120; + cap->bt.max_width = 1920; + cap->bt.max_height = 1200; + cap->bt.min_pixelclock = 27000000; + if (DIGITAL_INPUT) + cap->bt.max_pixelclock = 225000000; + else + cap->bt.max_pixelclock = 170000000; + cap->bt.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | + V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT; + cap->bt.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE | + V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM; + return 0; +} + +/* Fill the optional fields .standards and .flags in struct v4l2_dv_timings + if the format is listed in adv7604_timings[] */ +static void adv7604_fill_optional_dv_timings_fields(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + int i; + + for (i = 0; adv7604_timings[i].bt.width; i++) { + if (v4l_match_dv_timings(timings, &adv7604_timings[i], + DIGITAL_INPUT ? 250000 : 1000000)) { + *timings = adv7604_timings[i]; + break; + } + } +} + +static int adv7604_query_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + struct v4l2_bt_timings *bt = &timings->bt; + struct stdi_readback stdi; + + if (!timings) + return -EINVAL; + + memset(timings, 0, sizeof(struct v4l2_dv_timings)); + + if (no_signal(sd)) { + v4l2_dbg(1, debug, sd, "%s: no valid signal\n", __func__); + return -ENOLINK; + } + + /* read STDI */ + if (read_stdi(sd, &stdi)) { + v4l2_dbg(1, debug, sd, "%s: STDI/SSPD not locked\n", __func__); + return -ENOLINK; + } + bt->interlaced = stdi.interlaced ? + V4L2_DV_INTERLACED : V4L2_DV_PROGRESSIVE; + + if (DIGITAL_INPUT) { + timings->type = V4L2_DV_BT_656_1120; + + bt->width = (hdmi_read(sd, 0x07) & 0x0f) * 256 + hdmi_read(sd, 0x08); + bt->height = (hdmi_read(sd, 0x09) & 0x0f) * 256 + hdmi_read(sd, 0x0a); + bt->pixelclock = (hdmi_read(sd, 0x06) * 1000000) + + ((hdmi_read(sd, 0x3b) & 0x30) >> 4) * 250000; + bt->hfrontporch = (hdmi_read(sd, 0x20) & 0x03) * 256 + + hdmi_read(sd, 0x21); + bt->hsync = (hdmi_read(sd, 0x22) & 0x03) * 256 + + hdmi_read(sd, 0x23); + bt->hbackporch = (hdmi_read(sd, 0x24) & 0x03) * 256 + + hdmi_read(sd, 0x25); + bt->vfrontporch = ((hdmi_read(sd, 0x2a) & 0x1f) * 256 + + hdmi_read(sd, 0x2b)) / 2; + bt->vsync = ((hdmi_read(sd, 0x2e) & 0x1f) * 256 + + hdmi_read(sd, 0x2f)) / 2; + bt->vbackporch = ((hdmi_read(sd, 0x32) & 0x1f) * 256 + + hdmi_read(sd, 0x33)) / 2; + bt->polarities = ((hdmi_read(sd, 0x05) & 0x10) ? V4L2_DV_VSYNC_POS_POL : 0) | + ((hdmi_read(sd, 0x05) & 0x20) ? V4L2_DV_HSYNC_POS_POL : 0); + if (bt->interlaced == V4L2_DV_INTERLACED) { + bt->height += (hdmi_read(sd, 0x0b) & 0x0f) * 256 + + hdmi_read(sd, 0x0c); + bt->il_vfrontporch = ((hdmi_read(sd, 0x2c) & 0x1f) * 256 + + hdmi_read(sd, 0x2d)) / 2; + bt->il_vsync = ((hdmi_read(sd, 0x30) & 0x1f) * 256 + + hdmi_read(sd, 0x31)) / 2; + bt->vbackporch = ((hdmi_read(sd, 0x34) & 0x1f) * 256 + + hdmi_read(sd, 0x35)) / 2; + } + adv7604_fill_optional_dv_timings_fields(sd, timings); + } else { + /* find format + * Since LCVS values are inaccurate (REF_03, page 275-276), + * stdi2dv_timings() is called with lcvs +-1 if the first attempt fails. + */ + if (!stdi2dv_timings(sd, &stdi, timings)) + goto found; + stdi.lcvs += 1; + v4l2_dbg(1, debug, sd, "%s: lcvs + 1 = %d\n", __func__, stdi.lcvs); + if (!stdi2dv_timings(sd, &stdi, timings)) + goto found; + stdi.lcvs -= 2; + v4l2_dbg(1, debug, sd, "%s: lcvs - 1 = %d\n", __func__, stdi.lcvs); + if (stdi2dv_timings(sd, &stdi, timings)) { + v4l2_dbg(1, debug, sd, "%s: format not supported\n", __func__); + return -ERANGE; + } + } +found: + + if (no_signal(sd)) { + v4l2_dbg(1, debug, sd, "%s: signal lost during readout\n", __func__); + memset(timings, 0, sizeof(struct v4l2_dv_timings)); + return -ENOLINK; + } + + if ((!DIGITAL_INPUT && bt->pixelclock > 170000000) || + (DIGITAL_INPUT && bt->pixelclock > 225000000)) { + v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n", + __func__, (u32)bt->pixelclock); + return -ERANGE; + } + + if (debug > 1) + adv7604_print_timings(sd, timings, + "adv7604_query_dv_timings:", true); + + return 0; +} + +static int adv7604_s_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + struct v4l2_bt_timings *bt; + + if (!timings) + return -EINVAL; + + bt = &timings->bt; + + if ((!DIGITAL_INPUT && bt->pixelclock > 170000000) || + (DIGITAL_INPUT && bt->pixelclock > 225000000)) { + v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n", + __func__, (u32)bt->pixelclock); + return -ERANGE; + } + adv7604_fill_optional_dv_timings_fields(sd, timings); + + state->timings = *timings; + + /* freerun */ + configure_free_run(sd, bt); + + set_rgb_quantization_range(sd); + + + if (debug > 1) + adv7604_print_timings(sd, timings, + "adv7604_s_dv_timings:", true); + return 0; +} + +static int adv7604_g_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + + *timings = state->timings; + return 0; +} + +static void enable_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode) +{ + switch (prim_mode) { + case ADV7604_PRIM_MODE_COMP: + case ADV7604_PRIM_MODE_RGB: + /* enable */ + io_write(sd, 0x15, 0xb0); /* Disable Tristate of Pins (no audio) */ + break; + case ADV7604_PRIM_MODE_HDMI_COMP: + case ADV7604_PRIM_MODE_HDMI_GR: + /* enable */ + hdmi_write(sd, 0x1a, 0x0a); /* Unmute audio */ + hdmi_write(sd, 0x01, 0x00); /* Enable HDMI clock terminators */ + io_write(sd, 0x15, 0xa0); /* Disable Tristate of Pins */ + break; + default: + v4l2_err(sd, "%s: reserved primary mode 0x%0x\n", + __func__, prim_mode); + break; + } +} + +static void disable_input(struct v4l2_subdev *sd) +{ + /* disable */ + io_write(sd, 0x15, 0xbe); /* Tristate all outputs from video core */ + hdmi_write(sd, 0x1a, 0x1a); /* Mute audio */ + hdmi_write(sd, 0x01, 0x78); /* Disable HDMI clock terminators */ +} + +static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode) +{ + switch (prim_mode) { + case ADV7604_PRIM_MODE_COMP: + case ADV7604_PRIM_MODE_RGB: + /* set mode and select free run resolution */ + io_write(sd, 0x00, 0x07); /* video std */ + io_write(sd, 0x01, 0x02); /* prim mode */ + /* enable embedded syncs for auto graphics mode */ + cp_write_and_or(sd, 0x81, 0xef, 0x10); + + /* reset ADI recommended settings for HDMI: */ + /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ + hdmi_write(sd, 0x0d, 0x04); /* HDMI filter optimization */ + hdmi_write(sd, 0x3d, 0x00); /* DDC bus active pull-up control */ + hdmi_write(sd, 0x3e, 0x74); /* TMDS PLL optimization */ + hdmi_write(sd, 0x4e, 0x3b); /* TMDS PLL optimization */ + hdmi_write(sd, 0x57, 0x74); /* TMDS PLL optimization */ + hdmi_write(sd, 0x58, 0x63); /* TMDS PLL optimization */ + hdmi_write(sd, 0x8d, 0x18); /* equaliser */ + hdmi_write(sd, 0x8e, 0x34); /* equaliser */ + hdmi_write(sd, 0x93, 0x88); /* equaliser */ + hdmi_write(sd, 0x94, 0x2e); /* equaliser */ + hdmi_write(sd, 0x96, 0x00); /* enable automatic EQ changing */ + + afe_write(sd, 0x00, 0x08); /* power up ADC */ + afe_write(sd, 0x01, 0x06); /* power up Analog Front End */ + afe_write(sd, 0xc8, 0x00); /* phase control */ + + /* set ADI recommended settings for digitizer */ + /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */ + afe_write(sd, 0x12, 0x7b); /* ADC noise shaping filter controls */ + afe_write(sd, 0x0c, 0x1f); /* CP core gain controls */ + cp_write(sd, 0x3e, 0x04); /* CP core pre-gain control */ + cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */ + cp_write(sd, 0x40, 0x5c); /* CP core pre-gain control. Graphics mode */ + break; + + case ADV7604_PRIM_MODE_HDMI_COMP: + case ADV7604_PRIM_MODE_HDMI_GR: + /* set mode and select free run resolution */ + /* video std */ + io_write(sd, 0x00, + (prim_mode == ADV7604_PRIM_MODE_HDMI_GR) ? 0x02 : 0x1e); + io_write(sd, 0x01, prim_mode); /* prim mode */ + /* disable embedded syncs for auto graphics mode */ + cp_write_and_or(sd, 0x81, 0xef, 0x00); + + /* set ADI recommended settings for HDMI: */ + /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ + hdmi_write(sd, 0x0d, 0x84); /* HDMI filter optimization */ + hdmi_write(sd, 0x3d, 0x10); /* DDC bus active pull-up control */ + hdmi_write(sd, 0x3e, 0x39); /* TMDS PLL optimization */ + hdmi_write(sd, 0x4e, 0x3b); /* TMDS PLL optimization */ + hdmi_write(sd, 0x57, 0xb6); /* TMDS PLL optimization */ + hdmi_write(sd, 0x58, 0x03); /* TMDS PLL optimization */ + hdmi_write(sd, 0x8d, 0x18); /* equaliser */ + hdmi_write(sd, 0x8e, 0x34); /* equaliser */ + hdmi_write(sd, 0x93, 0x8b); /* equaliser */ + hdmi_write(sd, 0x94, 0x2d); /* equaliser */ + hdmi_write(sd, 0x96, 0x01); /* enable automatic EQ changing */ + + afe_write(sd, 0x00, 0xff); /* power down ADC */ + afe_write(sd, 0x01, 0xfe); /* power down Analog Front End */ + afe_write(sd, 0xc8, 0x40); /* phase control */ + + /* reset ADI recommended settings for digitizer */ + /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */ + afe_write(sd, 0x12, 0xfb); /* ADC noise shaping filter controls */ + afe_write(sd, 0x0c, 0x0d); /* CP core gain controls */ + cp_write(sd, 0x3e, 0x00); /* CP core pre-gain control */ + cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */ + cp_write(sd, 0x40, 0x80); /* CP core pre-gain control. Graphics mode */ + + break; + default: + v4l2_err(sd, "%s: reserved primary mode 0x%0x\n", __func__, prim_mode); + break; + } +} + +static int adv7604_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7604_state *state = to_state(sd); + + v4l2_dbg(2, debug, sd, "%s: input %d", __func__, input); + + switch (input) { + case 0: + /* TODO select HDMI_COMP or HDMI_GR */ + state->prim_mode = ADV7604_PRIM_MODE_HDMI_COMP; + break; + case 1: + state->prim_mode = ADV7604_PRIM_MODE_RGB; + break; + case 2: + state->prim_mode = ADV7604_PRIM_MODE_COMP; + break; + default: + return -EINVAL; + } + + disable_input(sd); + + select_input(sd, state->prim_mode); + + enable_input(sd, state->prim_mode); + + return 0; +} + +static int adv7604_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index) + return -EINVAL; + /* Good enough for now */ + *code = V4L2_MBUS_FMT_FIXED; + return 0; +} + +static int adv7604_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7604_state *state = to_state(sd); + + fmt->width = state->timings.bt.width; + fmt->height = state->timings.bt.height; + fmt->code = V4L2_MBUS_FMT_FIXED; + fmt->field = V4L2_FIELD_NONE; + if (state->timings.bt.standards & V4L2_DV_BT_STD_CEA861) { + fmt->colorspace = (state->timings.bt.height <= 576) ? + V4L2_COLORSPACE_SMPTE170M : V4L2_COLORSPACE_REC709; + } + return 0; +} + +static int adv7604_isr(struct v4l2_subdev *sd, u32 status, bool *handled) +{ + struct adv7604_state *state = to_state(sd); + u8 fmt_change, fmt_change_digital, tx_5v; + + /* format change */ + fmt_change = io_read(sd, 0x43) & 0x98; + if (fmt_change) + io_write(sd, 0x44, fmt_change); + fmt_change_digital = DIGITAL_INPUT ? (io_read(sd, 0x6b) & 0xc0) : 0; + if (fmt_change_digital) + io_write(sd, 0x6c, fmt_change_digital); + if (fmt_change || fmt_change_digital) { + v4l2_dbg(1, debug, sd, + "%s: ADV7604_FMT_CHANGE, fmt_change = 0x%x, fmt_change_digital = 0x%x\n", + __func__, fmt_change, fmt_change_digital); + v4l2_subdev_notify(sd, ADV7604_FMT_CHANGE, NULL); + if (handled) + *handled = true; + } + /* tx 5v detect */ + tx_5v = io_read(sd, 0x70) & 0x10; + if (tx_5v) { + v4l2_dbg(1, debug, sd, "%s: tx_5v: 0x%x\n", __func__, tx_5v); + io_write(sd, 0x71, tx_5v); + adv7604_s_detect_tx_5v_ctrl(sd); + if (handled) + *handled = true; + } + return 0; +} + +static int adv7604_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) +{ + struct adv7604_state *state = to_state(sd); + + if (edid->pad != 0) + return -EINVAL; + if (edid->blocks == 0) + return -EINVAL; + if (edid->start_block >= state->edid_blocks) + return -EINVAL; + if (edid->start_block + edid->blocks > state->edid_blocks) + edid->blocks = state->edid_blocks - edid->start_block; + if (!edid->edid) + return -EINVAL; + memcpy(edid->edid + edid->start_block * 128, + state->edid + edid->start_block * 128, + edid->blocks * 128); + return 0; +} + +static int adv7604_set_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) +{ + struct adv7604_state *state = to_state(sd); + int err; + + if (edid->pad != 0) + return -EINVAL; + if (edid->start_block != 0) + return -EINVAL; + if (edid->blocks == 0) { + /* Pull down the hotplug pin */ + v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)0); + /* Disables I2C access to internal EDID ram from DDC port */ + rep_write_and_or(sd, 0x77, 0xf0, 0x0); + state->edid_blocks = 0; + /* Fall back to a 16:9 aspect ratio */ + state->aspect_ratio.numerator = 16; + state->aspect_ratio.denominator = 9; + return 0; + } + if (edid->blocks > 2) + return -E2BIG; + if (!edid->edid) + return -EINVAL; + memcpy(state->edid, edid->edid, 128 * edid->blocks); + state->edid_blocks = edid->blocks; + state->aspect_ratio = v4l2_calc_aspect_ratio(edid->edid[0x15], + edid->edid[0x16]); + err = edid_write_block(sd, 128 * edid->blocks, state->edid); + if (err < 0) + v4l2_err(sd, "error %d writing edid\n", err); + return err; +} + +/*********** avi info frame CEA-861-E **************/ + +static void print_avi_infoframe(struct v4l2_subdev *sd) +{ + int i; + u8 buf[14]; + u8 avi_len; + u8 avi_ver; + + if (!(hdmi_read(sd, 0x05) & 0x80)) { + v4l2_info(sd, "receive DVI-D signal (AVI infoframe not supported)\n"); + return; + } + if (!(io_read(sd, 0x60) & 0x01)) { + v4l2_info(sd, "AVI infoframe not received\n"); + return; + } + + if (io_read(sd, 0x83) & 0x01) { + v4l2_info(sd, "AVI infoframe checksum error has occurred earlier\n"); + io_write(sd, 0x85, 0x01); /* clear AVI_INF_CKS_ERR_RAW */ + if (io_read(sd, 0x83) & 0x01) { + v4l2_info(sd, "AVI infoframe checksum error still present\n"); + io_write(sd, 0x85, 0x01); /* clear AVI_INF_CKS_ERR_RAW */ + } + } + + avi_len = infoframe_read(sd, 0xe2); + avi_ver = infoframe_read(sd, 0xe1); + v4l2_info(sd, "AVI infoframe version %d (%d byte)\n", + avi_ver, avi_len); + + if (avi_ver != 0x02) + return; + + for (i = 0; i < 14; i++) + buf[i] = infoframe_read(sd, i); + + v4l2_info(sd, + "\t%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7], + buf[8], buf[9], buf[10], buf[11], buf[12], buf[13]); +} + +static int adv7604_log_status(struct v4l2_subdev *sd) +{ + struct adv7604_state *state = to_state(sd); + struct v4l2_dv_timings timings; + struct stdi_readback stdi; + u8 reg_io_0x02 = io_read(sd, 0x02); + + char *csc_coeff_sel_rb[16] = { + "bypassed", "YPbPr601 -> RGB", "reserved", "YPbPr709 -> RGB", + "reserved", "RGB -> YPbPr601", "reserved", "RGB -> YPbPr709", + "reserved", "YPbPr709 -> YPbPr601", "YPbPr601 -> YPbPr709", + "reserved", "reserved", "reserved", "reserved", "manual" + }; + char *input_color_space_txt[16] = { + "RGB limited range (16-235)", "RGB full range (0-255)", + "YCbCr Bt.601 (16-235)", "YCbCr Bt.709 (16-235)", + "XvYCC Bt.601", "XvYCC Bt.709", + "YCbCr Bt.601 (0-255)", "YCbCr Bt.709 (0-255)", + "invalid", "invalid", "invalid", "invalid", "invalid", + "invalid", "invalid", "automatic" + }; + char *rgb_quantization_range_txt[] = { + "Automatic", + "RGB limited range (16-235)", + "RGB full range (0-255)", + }; + + v4l2_info(sd, "-----Chip status-----\n"); + v4l2_info(sd, "Chip power: %s\n", no_power(sd) ? "off" : "on"); + v4l2_info(sd, "Connector type: %s\n", state->connector_hdmi ? + "HDMI" : (DIGITAL_INPUT ? "DVI-D" : "DVI-A")); + v4l2_info(sd, "EDID: %s\n", ((rep_read(sd, 0x7d) & 0x01) && + (rep_read(sd, 0x77) & 0x01)) ? "enabled" : "disabled "); + v4l2_info(sd, "CEC: %s\n", !!(cec_read(sd, 0x2a) & 0x01) ? + "enabled" : "disabled"); + + v4l2_info(sd, "-----Signal status-----\n"); + v4l2_info(sd, "Cable detected (+5V power): %s\n", + (io_read(sd, 0x6f) & 0x10) ? "true" : "false"); + v4l2_info(sd, "TMDS signal detected: %s\n", + no_signal_tmds(sd) ? "false" : "true"); + v4l2_info(sd, "TMDS signal locked: %s\n", + no_lock_tmds(sd) ? "false" : "true"); + v4l2_info(sd, "SSPD locked: %s\n", no_lock_sspd(sd) ? "false" : "true"); + v4l2_info(sd, "STDI locked: %s\n", no_lock_stdi(sd) ? "false" : "true"); + v4l2_info(sd, "CP locked: %s\n", no_lock_cp(sd) ? "false" : "true"); + v4l2_info(sd, "CP free run: %s\n", + (!!(cp_read(sd, 0xff) & 0x10) ? "on" : "off")); + v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x\n", + io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f); + + v4l2_info(sd, "-----Video Timings-----\n"); + if (read_stdi(sd, &stdi)) + v4l2_info(sd, "STDI: not locked\n"); + else + v4l2_info(sd, "STDI: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %s, %chsync, %cvsync\n", + stdi.lcf, stdi.bl, stdi.lcvs, + stdi.interlaced ? "interlaced" : "progressive", + stdi.hs_pol, stdi.vs_pol); + if (adv7604_query_dv_timings(sd, &timings)) + v4l2_info(sd, "No video detected\n"); + else + adv7604_print_timings(sd, &timings, "Detected format:", true); + adv7604_print_timings(sd, &state->timings, "Configured format:", true); + + v4l2_info(sd, "-----Color space-----\n"); + v4l2_info(sd, "RGB quantization range ctrl: %s\n", + rgb_quantization_range_txt[state->rgb_quantization_range]); + v4l2_info(sd, "Input color space: %s\n", + input_color_space_txt[reg_io_0x02 >> 4]); + v4l2_info(sd, "Output color space: %s %s, saturator %s\n", + (reg_io_0x02 & 0x02) ? "RGB" : "YCbCr", + (reg_io_0x02 & 0x04) ? "(16-235)" : "(0-255)", + ((reg_io_0x02 & 0x04) ^ (reg_io_0x02 & 0x01)) ? + "enabled" : "disabled"); + v4l2_info(sd, "Color space conversion: %s\n", + csc_coeff_sel_rb[cp_read(sd, 0xfc) >> 4]); + + /* Digital video */ + if (DIGITAL_INPUT) { + v4l2_info(sd, "-----HDMI status-----\n"); + v4l2_info(sd, "HDCP encrypted content: %s\n", + hdmi_read(sd, 0x05) & 0x40 ? "true" : "false"); + + print_avi_infoframe(sd); + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops adv7604_ctrl_ops = { + .s_ctrl = adv7604_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops adv7604_core_ops = { + .log_status = adv7604_log_status, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .g_chip_ident = adv7604_g_chip_ident, + .interrupt_service_routine = adv7604_isr, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = adv7604_g_register, + .s_register = adv7604_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops adv7604_video_ops = { + .s_routing = adv7604_s_routing, + .g_input_status = adv7604_g_input_status, + .s_dv_timings = adv7604_s_dv_timings, + .g_dv_timings = adv7604_g_dv_timings, + .query_dv_timings = adv7604_query_dv_timings, + .enum_dv_timings = adv7604_enum_dv_timings, + .dv_timings_cap = adv7604_dv_timings_cap, + .enum_mbus_fmt = adv7604_enum_mbus_fmt, + .g_mbus_fmt = adv7604_g_mbus_fmt, + .try_mbus_fmt = adv7604_g_mbus_fmt, + .s_mbus_fmt = adv7604_g_mbus_fmt, +}; + +static const struct v4l2_subdev_pad_ops adv7604_pad_ops = { + .get_edid = adv7604_get_edid, + .set_edid = adv7604_set_edid, +}; + +static const struct v4l2_subdev_ops adv7604_ops = { + .core = &adv7604_core_ops, + .video = &adv7604_video_ops, + .pad = &adv7604_pad_ops, +}; + +/* -------------------------- custom ctrls ---------------------------------- */ + +static const struct v4l2_ctrl_config adv7604_ctrl_analog_sampling_phase = { + .ops = &adv7604_ctrl_ops, + .id = V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE, + .name = "Analog Sampling Phase", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0, + .max = 0x1f, + .step = 1, + .def = 0, +}; + +static const struct v4l2_ctrl_config adv7604_ctrl_free_run_color_manual = { + .ops = &adv7604_ctrl_ops, + .id = V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL, + .name = "Free Running Color, Manual", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = false, + .max = true, + .step = 1, + .def = false, +}; + +static const struct v4l2_ctrl_config adv7604_ctrl_free_run_color = { + .ops = &adv7604_ctrl_ops, + .id = V4L2_CID_ADV_RX_FREE_RUN_COLOR, + .name = "Free Running Color", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0x0, + .max = 0xffffff, + .step = 0x1, + .def = 0x0, +}; + +/* ----------------------------------------------------------------------- */ + +static int adv7604_core_init(struct v4l2_subdev *sd) +{ + struct adv7604_state *state = to_state(sd); + struct adv7604_platform_data *pdata = &state->pdata; + + hdmi_write(sd, 0x48, + (pdata->disable_pwrdnb ? 0x80 : 0) | + (pdata->disable_cable_det_rst ? 0x40 : 0)); + + disable_input(sd); + + /* power */ + io_write(sd, 0x0c, 0x42); /* Power up part and power down VDP */ + io_write(sd, 0x0b, 0x44); /* Power down ESDP block */ + cp_write(sd, 0xcf, 0x01); /* Power down macrovision */ + + /* video format */ + io_write_and_or(sd, 0x02, 0xf0, + pdata->alt_gamma << 3 | + pdata->op_656_range << 2 | + pdata->rgb_out << 1 | + pdata->alt_data_sat << 0); + io_write(sd, 0x03, pdata->op_format_sel); + io_write_and_or(sd, 0x04, 0x1f, pdata->op_ch_sel << 5); + io_write_and_or(sd, 0x05, 0xf0, pdata->blank_data << 3 | + pdata->insert_av_codes << 2 | + pdata->replicate_av_codes << 1 | + pdata->invert_cbcr << 0); + + /* TODO from platform data */ + cp_write(sd, 0x69, 0x30); /* Enable CP CSC */ + io_write(sd, 0x06, 0xa6); /* positive VS and HS */ + io_write(sd, 0x14, 0x7f); /* Drive strength adjusted to max */ + cp_write(sd, 0xba, (pdata->hdmi_free_run_mode << 1) | 0x01); /* HDMI free run */ + cp_write(sd, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */ + cp_write(sd, 0xf9, 0x23); /* STDI ch. 1 - LCVS change threshold - + ADI recommended setting [REF_01 c. 2.3.3] */ + cp_write(sd, 0x45, 0x23); /* STDI ch. 2 - LCVS change threshold - + ADI recommended setting [REF_01 c. 2.3.3] */ + cp_write(sd, 0xc9, 0x2d); /* use prim_mode and vid_std as free run resolution + for digital formats */ + + /* TODO from platform data */ + afe_write(sd, 0xb5, 0x01); /* Setting MCLK to 256Fs */ + + afe_write(sd, 0x02, pdata->ain_sel); /* Select analog input muxing mode */ + io_write_and_or(sd, 0x30, ~(1 << 4), pdata->output_bus_lsb_to_msb << 4); + + state->prim_mode = pdata->prim_mode; + select_input(sd, pdata->prim_mode); + + enable_input(sd, pdata->prim_mode); + + /* interrupts */ + io_write(sd, 0x40, 0xc2); /* Configure INT1 */ + io_write(sd, 0x41, 0xd7); /* STDI irq for any change, disable INT2 */ + io_write(sd, 0x46, 0x98); /* Enable SSPD, STDI and CP unlocked interrupts */ + io_write(sd, 0x6e, 0xc0); /* Enable V_LOCKED and DE_REGEN_LCK interrupts */ + io_write(sd, 0x73, 0x10); /* Enable CABLE_DET_A_ST (+5v) interrupt */ + + return v4l2_ctrl_handler_setup(sd->ctrl_handler); +} + +static void adv7604_unregister_clients(struct adv7604_state *state) +{ + if (state->i2c_avlink) + i2c_unregister_device(state->i2c_avlink); + if (state->i2c_cec) + i2c_unregister_device(state->i2c_cec); + if (state->i2c_infoframe) + i2c_unregister_device(state->i2c_infoframe); + if (state->i2c_esdp) + i2c_unregister_device(state->i2c_esdp); + if (state->i2c_dpp) + i2c_unregister_device(state->i2c_dpp); + if (state->i2c_afe) + i2c_unregister_device(state->i2c_afe); + if (state->i2c_repeater) + i2c_unregister_device(state->i2c_repeater); + if (state->i2c_edid) + i2c_unregister_device(state->i2c_edid); + if (state->i2c_hdmi) + i2c_unregister_device(state->i2c_hdmi); + if (state->i2c_test) + i2c_unregister_device(state->i2c_test); + if (state->i2c_cp) + i2c_unregister_device(state->i2c_cp); + if (state->i2c_vdp) + i2c_unregister_device(state->i2c_vdp); +} + +static struct i2c_client *adv7604_dummy_client(struct v4l2_subdev *sd, + u8 addr, u8 io_reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (addr) + io_write(sd, io_reg, addr << 1); + return i2c_new_dummy(client->adapter, io_read(sd, io_reg) >> 1); +} + +static int adv7604_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7604_state *state; + struct adv7604_platform_data *pdata = client->dev.platform_data; + struct v4l2_ctrl_handler *hdl; + struct v4l2_subdev *sd; + int err; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + v4l_dbg(1, debug, client, "detecting adv7604 client on address 0x%x\n", + client->addr << 1); + + state = kzalloc(sizeof(struct adv7604_state), GFP_KERNEL); + if (!state) { + v4l_err(client, "Could not allocate adv7604_state memory!\n"); + return -ENOMEM; + } + + /* platform data */ + if (!pdata) { + v4l_err(client, "No platform data!\n"); + err = -ENODEV; + goto err_state; + } + memcpy(&state->pdata, pdata, sizeof(state->pdata)); + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &adv7604_ops); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + state->connector_hdmi = pdata->connector_hdmi; + + /* i2c access to adv7604? */ + if (adv_smbus_read_byte_data_check(client, 0xfb, false) != 0x68) { + v4l2_info(sd, "not an adv7604 on address 0x%x\n", + client->addr << 1); + err = -ENODEV; + goto err_state; + } + + /* control handlers */ + hdl = &state->hdl; + v4l2_ctrl_handler_init(hdl, 9); + + v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 128); + v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 128); + v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, + V4L2_CID_HUE, 0, 128, 1, 0); + + /* private controls */ + state->detect_tx_5v_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_RX_POWER_PRESENT, 0, 1, 0, 0); + state->detect_tx_5v_ctrl->is_private = true; + state->rgb_quantization_range_ctrl = + v4l2_ctrl_new_std_menu(hdl, &adv7604_ctrl_ops, + V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, + 0, V4L2_DV_RGB_RANGE_AUTO); + state->rgb_quantization_range_ctrl->is_private = true; + + /* custom controls */ + state->analog_sampling_phase_ctrl = + v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_analog_sampling_phase, NULL); + state->analog_sampling_phase_ctrl->is_private = true; + state->free_run_color_manual_ctrl = + v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_free_run_color_manual, NULL); + state->free_run_color_manual_ctrl->is_private = true; + state->free_run_color_ctrl = + v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_free_run_color, NULL); + state->free_run_color_ctrl->is_private = true; + + sd->ctrl_handler = hdl; + if (hdl->error) { + err = hdl->error; + goto err_hdl; + } + if (adv7604_s_detect_tx_5v_ctrl(sd)) { + err = -ENODEV; + goto err_hdl; + } + + state->i2c_avlink = adv7604_dummy_client(sd, pdata->i2c_avlink, 0xf3); + state->i2c_cec = adv7604_dummy_client(sd, pdata->i2c_cec, 0xf4); + state->i2c_infoframe = adv7604_dummy_client(sd, pdata->i2c_infoframe, 0xf5); + state->i2c_esdp = adv7604_dummy_client(sd, pdata->i2c_esdp, 0xf6); + state->i2c_dpp = adv7604_dummy_client(sd, pdata->i2c_dpp, 0xf7); + state->i2c_afe = adv7604_dummy_client(sd, pdata->i2c_afe, 0xf8); + state->i2c_repeater = adv7604_dummy_client(sd, pdata->i2c_repeater, 0xf9); + state->i2c_edid = adv7604_dummy_client(sd, pdata->i2c_edid, 0xfa); + state->i2c_hdmi = adv7604_dummy_client(sd, pdata->i2c_hdmi, 0xfb); + state->i2c_test = adv7604_dummy_client(sd, pdata->i2c_test, 0xfc); + state->i2c_cp = adv7604_dummy_client(sd, pdata->i2c_cp, 0xfd); + state->i2c_vdp = adv7604_dummy_client(sd, pdata->i2c_vdp, 0xfe); + if (!state->i2c_avlink || !state->i2c_cec || !state->i2c_infoframe || + !state->i2c_esdp || !state->i2c_dpp || !state->i2c_afe || + !state->i2c_repeater || !state->i2c_edid || !state->i2c_hdmi || + !state->i2c_test || !state->i2c_cp || !state->i2c_vdp) { + err = -ENOMEM; + v4l2_err(sd, "failed to create all i2c clients\n"); + goto err_i2c; + } + + /* work queues */ + state->work_queues = create_singlethread_workqueue(client->name); + if (!state->work_queues) { + v4l2_err(sd, "Could not create work queue\n"); + err = -ENOMEM; + goto err_i2c; + } + + INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug, + adv7604_delayed_work_enable_hotplug); + + state->pad.flags = MEDIA_PAD_FL_SOURCE; + err = media_entity_init(&sd->entity, 1, &state->pad, 0); + if (err) + goto err_work_queues; + + err = adv7604_core_init(sd); + if (err) + goto err_entity; + v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + return 0; + +err_entity: + media_entity_cleanup(&sd->entity); +err_work_queues: + cancel_delayed_work(&state->delayed_work_enable_hotplug); + destroy_workqueue(state->work_queues); +err_i2c: + adv7604_unregister_clients(state); +err_hdl: + v4l2_ctrl_handler_free(hdl); +err_state: + kfree(state); + return err; +} + +/* ----------------------------------------------------------------------- */ + +static int adv7604_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7604_state *state = to_state(sd); + + cancel_delayed_work(&state->delayed_work_enable_hotplug); + destroy_workqueue(state->work_queues); + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + adv7604_unregister_clients(to_state(sd)); + v4l2_ctrl_handler_free(sd->ctrl_handler); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static struct i2c_device_id adv7604_id[] = { + { "adv7604", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7604_id); + +static struct i2c_driver adv7604_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7604", + }, + .probe = adv7604_probe, + .remove = adv7604_remove, + .id_table = adv7604_id, +}; + +module_i2c_driver(adv7604_driver); diff --git a/drivers/media/video/ak881x.c b/drivers/media/i2c/ak881x.c similarity index 100% rename from drivers/media/video/ak881x.c rename to drivers/media/i2c/ak881x.c diff --git a/drivers/media/video/aptina-pll.c b/drivers/media/i2c/aptina-pll.c similarity index 100% rename from drivers/media/video/aptina-pll.c rename to drivers/media/i2c/aptina-pll.c diff --git a/drivers/media/video/aptina-pll.h b/drivers/media/i2c/aptina-pll.h similarity index 100% rename from drivers/media/video/aptina-pll.h rename to drivers/media/i2c/aptina-pll.h diff --git a/drivers/media/video/as3645a.c b/drivers/media/i2c/as3645a.c similarity index 99% rename from drivers/media/video/as3645a.c rename to drivers/media/i2c/as3645a.c index c4b03572dce85862ea048026f8774693103f3fb6..3bfdbf9d9bf1b4accb9632dd2f831d64fe89c12f 100644 --- a/drivers/media/video/as3645a.c +++ b/drivers/media/i2c/as3645a.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/as3645a.c - AS3645A and LM3555 flash controllers driver + * drivers/media/i2c/as3645a.c - AS3645A and LM3555 flash controllers driver * * Copyright (C) 2008-2011 Nokia Corporation * Copyright (c) 2011, Intel Corporation. diff --git a/drivers/media/video/bt819.c b/drivers/media/i2c/bt819.c similarity index 100% rename from drivers/media/video/bt819.c rename to drivers/media/i2c/bt819.c diff --git a/drivers/media/video/bt856.c b/drivers/media/i2c/bt856.c similarity index 100% rename from drivers/media/video/bt856.c rename to drivers/media/i2c/bt856.c diff --git a/drivers/media/video/bt866.c b/drivers/media/i2c/bt866.c similarity index 100% rename from drivers/media/video/bt866.c rename to drivers/media/i2c/bt866.c diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/i2c/btcx-risc.c similarity index 100% rename from drivers/media/video/btcx-risc.c rename to drivers/media/i2c/btcx-risc.c diff --git a/drivers/media/video/btcx-risc.h b/drivers/media/i2c/btcx-risc.h similarity index 100% rename from drivers/media/video/btcx-risc.h rename to drivers/media/i2c/btcx-risc.h diff --git a/drivers/media/video/cs5345.c b/drivers/media/i2c/cs5345.c similarity index 100% rename from drivers/media/video/cs5345.c rename to drivers/media/i2c/cs5345.c diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/i2c/cs53l32a.c similarity index 100% rename from drivers/media/video/cs53l32a.c rename to drivers/media/i2c/cs53l32a.c diff --git a/drivers/media/video/cx2341x.c b/drivers/media/i2c/cx2341x.c similarity index 100% rename from drivers/media/video/cx2341x.c rename to drivers/media/i2c/cx2341x.c diff --git a/drivers/media/video/cx25840/Kconfig b/drivers/media/i2c/cx25840/Kconfig similarity index 100% rename from drivers/media/video/cx25840/Kconfig rename to drivers/media/i2c/cx25840/Kconfig diff --git a/drivers/media/video/cx25840/Makefile b/drivers/media/i2c/cx25840/Makefile similarity index 80% rename from drivers/media/video/cx25840/Makefile rename to drivers/media/i2c/cx25840/Makefile index dc40dde2e0c8449a85bb81119b319168b99532e3..898eb13340ae193ef8937c709987f65dbcab209b 100644 --- a/drivers/media/video/cx25840/Makefile +++ b/drivers/media/i2c/cx25840/Makefile @@ -3,4 +3,4 @@ cx25840-objs := cx25840-core.o cx25840-audio.o cx25840-firmware.o \ obj-$(CONFIG_VIDEO_CX25840) += cx25840.o -ccflags-y += -Idrivers/media/video +ccflags-y += -Idrivers/media/i2c diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/i2c/cx25840/cx25840-audio.c similarity index 100% rename from drivers/media/video/cx25840/cx25840-audio.c rename to drivers/media/i2c/cx25840/cx25840-audio.c diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c similarity index 100% rename from drivers/media/video/cx25840/cx25840-core.c rename to drivers/media/i2c/cx25840/cx25840-core.c diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/i2c/cx25840/cx25840-core.h similarity index 100% rename from drivers/media/video/cx25840/cx25840-core.h rename to drivers/media/i2c/cx25840/cx25840-core.h diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/i2c/cx25840/cx25840-firmware.c similarity index 92% rename from drivers/media/video/cx25840/cx25840-firmware.c rename to drivers/media/i2c/cx25840/cx25840-firmware.c index 8150200511daed0ce52918e0e9024a2aa762002c..b3169f94ece879ee89ecb45d61e4a390927b5582 100644 --- a/drivers/media/video/cx25840/cx25840-firmware.c +++ b/drivers/media/i2c/cx25840/cx25840-firmware.c @@ -61,6 +61,10 @@ static void end_fw_load(struct i2c_client *client) cx25840_write(client, 0x803, 0x03); } +#define CX2388x_FIRMWARE "v4l-cx23885-avcore-01.fw" +#define CX231xx_FIRMWARE "v4l-cx231xx-avcore-01.fw" +#define CX25840_FIRMWARE "v4l-cx25840.fw" + static const char *get_fw_name(struct i2c_client *client) { struct cx25840_state *state = to_state(i2c_get_clientdata(client)); @@ -68,10 +72,10 @@ static const char *get_fw_name(struct i2c_client *client) if (firmware[0]) return firmware; if (is_cx2388x(state)) - return "v4l-cx23885-avcore-01.fw"; + return CX2388x_FIRMWARE; if (is_cx231xx(state)) - return "v4l-cx231xx-avcore-01.fw"; - return "v4l-cx25840.fw"; + return CX231xx_FIRMWARE; + return CX25840_FIRMWARE; } static int check_fw_load(struct i2c_client *client, int size) @@ -164,3 +168,8 @@ int cx25840_loadfw(struct i2c_client *client) return check_fw_load(client, size); } + +MODULE_FIRMWARE(CX2388x_FIRMWARE); +MODULE_FIRMWARE(CX231xx_FIRMWARE); +MODULE_FIRMWARE(CX25840_FIRMWARE); + diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/i2c/cx25840/cx25840-ir.c similarity index 100% rename from drivers/media/video/cx25840/cx25840-ir.c rename to drivers/media/i2c/cx25840/cx25840-ir.c diff --git a/drivers/media/video/cx25840/cx25840-vbi.c b/drivers/media/i2c/cx25840/cx25840-vbi.c similarity index 98% rename from drivers/media/video/cx25840/cx25840-vbi.c rename to drivers/media/i2c/cx25840/cx25840-vbi.c index 64a4004f8a97c9f041296cd1da2799a5042129b2..c39e91dc113794b936fd484da0686a635724ff01 100644 --- a/drivers/media/video/cx25840/cx25840-vbi.c +++ b/drivers/media/i2c/cx25840/cx25840-vbi.c @@ -96,7 +96,8 @@ int cx25840_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format * int is_pal = !(state->std & V4L2_STD_525_60); int i; - memset(svbi, 0, sizeof(*svbi)); + memset(svbi->service_lines, 0, sizeof(svbi->service_lines)); + svbi->service_set = 0; /* we're done if raw VBI is active */ if ((cx25840_read(client, 0x404) & 0x10) == 0) return 0; diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c similarity index 100% rename from drivers/media/video/ir-kbd-i2c.c rename to drivers/media/i2c/ir-kbd-i2c.c diff --git a/drivers/media/video/ks0127.c b/drivers/media/i2c/ks0127.c similarity index 99% rename from drivers/media/video/ks0127.c rename to drivers/media/i2c/ks0127.c index ee7ca2dcca2fd3cf8d38502b618b25be1b50d4b0..04a6efa37cc376eb2c49637b26a499da8665439b 100644 --- a/drivers/media/video/ks0127.c +++ b/drivers/media/i2c/ks0127.c @@ -319,8 +319,17 @@ static u8 ks0127_read(struct v4l2_subdev *sd, u8 reg) struct i2c_client *client = v4l2_get_subdevdata(sd); char val = 0; struct i2c_msg msgs[] = { - { client->addr, 0, sizeof(reg), ® }, - { client->addr, I2C_M_RD | I2C_M_NO_RD_ACK, sizeof(val), &val } + { + .addr = client->addr, + .len = sizeof(reg), + .buf = ® + }, + { + .addr = client->addr, + .flags = I2C_M_RD | I2C_M_NO_RD_ACK, + .len = sizeof(val), + .buf = &val + } }; int ret; diff --git a/drivers/media/video/ks0127.h b/drivers/media/i2c/ks0127.h similarity index 100% rename from drivers/media/video/ks0127.h rename to drivers/media/i2c/ks0127.h diff --git a/drivers/media/video/m52790.c b/drivers/media/i2c/m52790.c similarity index 100% rename from drivers/media/video/m52790.c rename to drivers/media/i2c/m52790.c diff --git a/drivers/media/video/m5mols/Kconfig b/drivers/media/i2c/m5mols/Kconfig similarity index 100% rename from drivers/media/video/m5mols/Kconfig rename to drivers/media/i2c/m5mols/Kconfig diff --git a/drivers/media/video/m5mols/Makefile b/drivers/media/i2c/m5mols/Makefile similarity index 100% rename from drivers/media/video/m5mols/Makefile rename to drivers/media/i2c/m5mols/Makefile diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/i2c/m5mols/m5mols.h similarity index 99% rename from drivers/media/video/m5mols/m5mols.h rename to drivers/media/i2c/m5mols/m5mols.h index 527e7b2965df3a351dc3d5d1ff48614adb4a7eeb..86c815be348cbe9214de2f87d1915b01a2452555 100644 --- a/drivers/media/video/m5mols/m5mols.h +++ b/drivers/media/i2c/m5mols/m5mols.h @@ -155,8 +155,6 @@ struct m5mols_version { * @pdata: platform data * @sd: v4l-subdev instance * @pad: media pad - * @ffmt: current fmt according to resolution type - * @res_type: current resolution type * @irq_waitq: waitqueue for the capture * @irq_done: set to 1 in the interrupt handler * @handle: control handler @@ -174,6 +172,10 @@ struct m5mols_version { * @wdr: wide dynamic range control * @stabilization: image stabilization control * @jpeg_quality: JPEG compression quality control + * @set_power: optional power callback to the board code + * @lock: mutex protecting the structure fields below + * @ffmt: current fmt according to resolution type + * @res_type: current resolution type * @ver: information of the version * @cap: the capture mode attributes * @isp_ready: 1 when the ISP controller has completed booting @@ -181,14 +183,11 @@ struct m5mols_version { * @ctrl_sync: 1 when the control handler state is restored in H/W * @resolution: register value for current resolution * @mode: register value for current operation mode - * @set_power: optional power callback to the board code */ struct m5mols_info { const struct m5mols_platform_data *pdata; struct v4l2_subdev sd; struct media_pad pad; - struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX]; - int res_type; wait_queue_head_t irq_waitq; atomic_t irq_done; @@ -216,6 +215,13 @@ struct m5mols_info { struct v4l2_ctrl *stabilization; struct v4l2_ctrl *jpeg_quality; + int (*set_power)(struct device *dev, int on); + + struct mutex lock; + + struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX]; + int res_type; + struct m5mols_version ver; struct m5mols_capture cap; @@ -225,8 +231,6 @@ struct m5mols_info { u8 resolution; u8 mode; - - int (*set_power)(struct device *dev, int on); }; #define is_available_af(__info) (__info->ver.af) diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/i2c/m5mols/m5mols_capture.c similarity index 100% rename from drivers/media/video/m5mols/m5mols_capture.c rename to drivers/media/i2c/m5mols/m5mols_capture.c diff --git a/drivers/media/video/m5mols/m5mols_controls.c b/drivers/media/i2c/m5mols/m5mols_controls.c similarity index 100% rename from drivers/media/video/m5mols/m5mols_controls.c rename to drivers/media/i2c/m5mols/m5mols_controls.c diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c similarity index 95% rename from drivers/media/video/m5mols/m5mols_core.c rename to drivers/media/i2c/m5mols/m5mols_core.c index 8bf6599a4c1aaa1ff2054115dd13d6bcdb31aa1d..2f490ef26c388e2b868369dd189299430288efa3 100644 --- a/drivers/media/video/m5mols/m5mols_core.c +++ b/drivers/media/i2c/m5mols/m5mols_core.c @@ -551,13 +551,18 @@ static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, { struct m5mols_info *info = to_m5mols(sd); struct v4l2_mbus_framefmt *format; + int ret = 0; + + mutex_lock(&info->lock); format = __find_format(info, fh, fmt->which, info->res_type); if (!format) - return -EINVAL; + fmt->format = *format; + else + ret = -EINVAL; - fmt->format = *format; - return 0; + mutex_unlock(&info->lock); + return ret; } static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, @@ -578,6 +583,7 @@ static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, if (!sfmt) return 0; + mutex_lock(&info->lock); format->code = m5mols_default_ffmt[type].code; format->colorspace = V4L2_COLORSPACE_JPEG; @@ -589,7 +595,8 @@ static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, info->res_type = type; } - return 0; + mutex_unlock(&info->lock); + return ret; } static int m5mols_enum_mbus_code(struct v4l2_subdev *sd, @@ -661,20 +668,25 @@ static int m5mols_start_monitor(struct m5mols_info *info) static int m5mols_s_stream(struct v4l2_subdev *sd, int enable) { struct m5mols_info *info = to_m5mols(sd); - u32 code = info->ffmt[info->res_type].code; + u32 code; + int ret; - if (enable) { - int ret = -EINVAL; + mutex_lock(&info->lock); + code = info->ffmt[info->res_type].code; + if (enable) { if (is_code(code, M5MOLS_RESTYPE_MONITOR)) ret = m5mols_start_monitor(info); if (is_code(code, M5MOLS_RESTYPE_CAPTURE)) ret = m5mols_start_capture(info); - - return ret; + else + ret = -EINVAL; + } else { + ret = m5mols_set_mode(info, REG_PARAMETER); } - return m5mols_set_mode(info, REG_PARAMETER); + mutex_unlock(&info->lock); + return ret; } static const struct v4l2_subdev_video_ops m5mols_video_ops = { @@ -773,6 +785,20 @@ static int m5mols_fw_start(struct v4l2_subdev *sd) return ret; } +/* Execute the lens soft-landing algorithm */ +static int m5mols_auto_focus_stop(struct m5mols_info *info) +{ + int ret; + + ret = m5mols_write(&info->sd, AF_EXECUTE, REG_AF_STOP); + if (!ret) + ret = m5mols_write(&info->sd, AF_MODE, REG_AF_POWEROFF); + if (!ret) + ret = m5mols_busy_wait(&info->sd, SYSTEM_STATUS, REG_AF_IDLE, + 0xff, -1); + return ret; +} + /** * m5mols_s_power - Main sensor power control function * @@ -785,29 +811,26 @@ static int m5mols_s_power(struct v4l2_subdev *sd, int on) struct m5mols_info *info = to_m5mols(sd); int ret; + mutex_lock(&info->lock); + if (on) { ret = m5mols_sensor_power(info, true); if (!ret) ret = m5mols_fw_start(sd); - return ret; - } + } else { + if (is_manufacturer(info, REG_SAMSUNG_TECHWIN)) { + ret = m5mols_set_mode(info, REG_MONITOR); + if (!ret) + ret = m5mols_auto_focus_stop(info); + if (ret < 0) + v4l2_warn(sd, "Soft landing lens failed\n"); + } + ret = m5mols_sensor_power(info, false); - if (is_manufacturer(info, REG_SAMSUNG_TECHWIN)) { - ret = m5mols_set_mode(info, REG_MONITOR); - if (!ret) - ret = m5mols_write(sd, AF_EXECUTE, REG_AF_STOP); - if (!ret) - ret = m5mols_write(sd, AF_MODE, REG_AF_POWEROFF); - if (!ret) - ret = m5mols_busy_wait(sd, SYSTEM_STATUS, REG_AF_IDLE, - 0xff, -1); - if (ret < 0) - v4l2_warn(sd, "Soft landing lens failed\n"); + info->ctrl_sync = 0; } - ret = m5mols_sensor_power(info, false); - info->ctrl_sync = 0; - + mutex_unlock(&info->lock); return ret; } @@ -822,13 +845,6 @@ static int m5mols_log_status(struct v4l2_subdev *sd) static const struct v4l2_subdev_core_ops m5mols_core_ops = { .s_power = m5mols_s_power, - .g_ctrl = v4l2_subdev_g_ctrl, - .s_ctrl = v4l2_subdev_s_ctrl, - .queryctrl = v4l2_subdev_queryctrl, - .querymenu = v4l2_subdev_querymenu, - .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, - .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, - .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, .log_status = m5mols_log_status, }; @@ -919,6 +935,8 @@ static int __devinit m5mols_probe(struct i2c_client *client, sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; init_waitqueue_head(&info->irq_waitq); + mutex_init(&info->lock); + ret = request_irq(client->irq, m5mols_irq_handler, IRQF_TRIGGER_RISING, MODULE_NAME, sd); if (ret) { @@ -937,7 +955,7 @@ static int __devinit m5mols_probe(struct i2c_client *client, if (!ret) ret = m5mols_init_controls(sd); - m5mols_sensor_power(info, false); + ret = m5mols_sensor_power(info, false); if (!ret) return 0; out_irq: diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/i2c/m5mols/m5mols_reg.h similarity index 100% rename from drivers/media/video/m5mols/m5mols_reg.h rename to drivers/media/i2c/m5mols/m5mols_reg.h diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/i2c/msp3400-driver.c similarity index 98% rename from drivers/media/video/msp3400-driver.c rename to drivers/media/i2c/msp3400-driver.c index aeb22be7dcbd80a11c545cafcc0dfe5e2da62fdd..766305f69a2899264d3819e8ebbda7e165d488af 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/i2c/msp3400-driver.c @@ -119,12 +119,31 @@ int msp_reset(struct i2c_client *client) static u8 write[3] = { I2C_MSP_DSP + 1, 0x00, 0x1e }; u8 read[2]; struct i2c_msg reset[2] = { - { client->addr, I2C_M_IGNORE_NAK, 3, reset_off }, - { client->addr, I2C_M_IGNORE_NAK, 3, reset_on }, + { + .addr = client->addr, + .flags = I2C_M_IGNORE_NAK, + .len = 3, + .buf = reset_off + }, + { + .addr = client->addr, + .flags = I2C_M_IGNORE_NAK, + .len = 3, + .buf = reset_on + }, }; struct i2c_msg test[2] = { - { client->addr, 0, 3, write }, - { client->addr, I2C_M_RD, 2, read }, + { + .addr = client->addr, + .len = 3, + .buf = write + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 2, + .buf = read + }, }; v4l_dbg(3, msp_debug, client, "msp_reset\n"); @@ -143,8 +162,17 @@ static int msp_read(struct i2c_client *client, int dev, int addr) u8 write[3]; u8 read[2]; struct i2c_msg msgs[2] = { - { client->addr, 0, 3, write }, - { client->addr, I2C_M_RD, 2, read } + { + .addr = client->addr, + .len = 3, + .buf = write + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 2, + .buf = read + } }; write[0] = dev + 1; diff --git a/drivers/media/video/msp3400-driver.h b/drivers/media/i2c/msp3400-driver.h similarity index 100% rename from drivers/media/video/msp3400-driver.h rename to drivers/media/i2c/msp3400-driver.h diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/i2c/msp3400-kthreads.c similarity index 100% rename from drivers/media/video/msp3400-kthreads.c rename to drivers/media/i2c/msp3400-kthreads.c diff --git a/drivers/media/video/mt9m032.c b/drivers/media/i2c/mt9m032.c similarity index 99% rename from drivers/media/video/mt9m032.c rename to drivers/media/i2c/mt9m032.c index 445359c961136cd1595e59138c3e3a3b24ee90e2..f80c1d7ec88454def6d81bfaba52f98d0d83bbca 100644 --- a/drivers/media/video/mt9m032.c +++ b/drivers/media/i2c/mt9m032.c @@ -781,7 +781,7 @@ static int mt9m032_probe(struct i2c_client *client, ret = mt9m032_write(client, MT9M032_RESET, 1); /* reset on */ if (ret < 0) goto error_entity; - mt9m032_write(client, MT9M032_RESET, 0); /* reset off */ + ret = mt9m032_write(client, MT9M032_RESET, 0); /* reset off */ if (ret < 0) goto error_entity; diff --git a/drivers/media/video/mt9p031.c b/drivers/media/i2c/mt9p031.c similarity index 98% rename from drivers/media/video/mt9p031.c rename to drivers/media/i2c/mt9p031.c index 3be537ef22d2f4138067ca9d09d48ffe65fb7cda..2c0f4077c4916215da4cff1580b79fbce27c4fe6 100644 --- a/drivers/media/video/mt9p031.c +++ b/drivers/media/i2c/mt9p031.c @@ -55,9 +55,9 @@ #define MT9P031_HORIZONTAL_BLANK_MIN 0 #define MT9P031_HORIZONTAL_BLANK_MAX 4095 #define MT9P031_VERTICAL_BLANK 0x06 -#define MT9P031_VERTICAL_BLANK_MIN 0 -#define MT9P031_VERTICAL_BLANK_MAX 4095 -#define MT9P031_VERTICAL_BLANK_DEF 25 +#define MT9P031_VERTICAL_BLANK_MIN 1 +#define MT9P031_VERTICAL_BLANK_MAX 4096 +#define MT9P031_VERTICAL_BLANK_DEF 26 #define MT9P031_OUTPUT_CONTROL 0x07 #define MT9P031_OUTPUT_CONTROL_CEN 2 #define MT9P031_OUTPUT_CONTROL_SYN 1 @@ -368,13 +368,13 @@ static int mt9p031_set_params(struct mt9p031 *mt9p031) /* Blanking - use minimum value for horizontal blanking and default * value for vertical blanking. */ - hblank = 346 * ybin + 64 + (80 >> max_t(unsigned int, xbin, 3)); + hblank = 346 * ybin + 64 + (80 >> min_t(unsigned int, xbin, 3)); vblank = MT9P031_VERTICAL_BLANK_DEF; - ret = mt9p031_write(client, MT9P031_HORIZONTAL_BLANK, hblank); + ret = mt9p031_write(client, MT9P031_HORIZONTAL_BLANK, hblank - 1); if (ret < 0) return ret; - ret = mt9p031_write(client, MT9P031_VERTICAL_BLANK, vblank); + ret = mt9p031_write(client, MT9P031_VERTICAL_BLANK, vblank - 1); if (ret < 0) return ret; diff --git a/drivers/media/video/mt9t001.c b/drivers/media/i2c/mt9t001.c similarity index 100% rename from drivers/media/video/mt9t001.c rename to drivers/media/i2c/mt9t001.c diff --git a/drivers/media/video/mt9v011.c b/drivers/media/i2c/mt9v011.c similarity index 100% rename from drivers/media/video/mt9v011.c rename to drivers/media/i2c/mt9v011.c diff --git a/drivers/media/video/mt9v032.c b/drivers/media/i2c/mt9v032.c similarity index 88% rename from drivers/media/video/mt9v032.c rename to drivers/media/i2c/mt9v032.c index 4ba4884c016eccfec828ecbc67134f6949c5e634..e2177405dad2eb65de2bbc635727dca3f86099d1 100644 --- a/drivers/media/video/mt9v032.c +++ b/drivers/media/i2c/mt9v032.c @@ -29,6 +29,8 @@ #define MT9V032_PIXEL_ARRAY_HEIGHT 492 #define MT9V032_PIXEL_ARRAY_WIDTH 782 +#define MT9V032_SYSCLK_FREQ_DEF 26600000 + #define MT9V032_CHIP_VERSION 0x00 #define MT9V032_CHIP_ID_REV1 0x1311 #define MT9V032_CHIP_ID_REV3 0x1313 @@ -50,9 +52,11 @@ #define MT9V032_WINDOW_WIDTH_MAX 752 #define MT9V032_HORIZONTAL_BLANKING 0x05 #define MT9V032_HORIZONTAL_BLANKING_MIN 43 +#define MT9V032_HORIZONTAL_BLANKING_DEF 94 #define MT9V032_HORIZONTAL_BLANKING_MAX 1023 #define MT9V032_VERTICAL_BLANKING 0x06 #define MT9V032_VERTICAL_BLANKING_MIN 4 +#define MT9V032_VERTICAL_BLANKING_DEF 45 #define MT9V032_VERTICAL_BLANKING_MAX 3000 #define MT9V032_CHIP_CONTROL 0x07 #define MT9V032_CHIP_CONTROL_MASTER_MODE (1 << 3) @@ -123,13 +127,20 @@ struct mt9v032 { struct v4l2_rect crop; struct v4l2_ctrl_handler ctrls; + struct { + struct v4l2_ctrl *link_freq; + struct v4l2_ctrl *pixel_rate; + }; struct mutex power_lock; int power_count; struct mt9v032_platform_data *pdata; + + u32 sysclk; u16 chip_control; u16 aec_agc; + u16 hblank; }; static struct mt9v032 *to_mt9v032(struct v4l2_subdev *sd) @@ -187,13 +198,25 @@ mt9v032_update_aec_agc(struct mt9v032 *mt9v032, u16 which, int enable) return 0; } +static int +mt9v032_update_hblank(struct mt9v032 *mt9v032) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + struct v4l2_rect *crop = &mt9v032->crop; + + return mt9v032_write(client, MT9V032_HORIZONTAL_BLANKING, + max_t(s32, mt9v032->hblank, 660 - crop->width)); +} + +#define EXT_CLK 25000000 + static int mt9v032_power_on(struct mt9v032 *mt9v032) { struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); int ret; if (mt9v032->pdata->set_clock) { - mt9v032->pdata->set_clock(&mt9v032->subdev, 25000000); + mt9v032->pdata->set_clock(&mt9v032->subdev, mt9v032->sysclk); udelay(1); } @@ -319,8 +342,7 @@ static int mt9v032_s_stream(struct v4l2_subdev *subdev, int enable) if (ret < 0) return ret; - ret = mt9v032_write(client, MT9V032_HORIZONTAL_BLANKING, - max(43, 660 - crop->width)); + ret = mt9v032_update_hblank(mt9v032); if (ret < 0) return ret; @@ -365,6 +387,18 @@ static int mt9v032_get_format(struct v4l2_subdev *subdev, return 0; } +static void mt9v032_configure_pixel_rate(struct mt9v032 *mt9v032, + unsigned int hratio) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + int ret; + + ret = v4l2_ctrl_s_ctrl_int64(mt9v032->pixel_rate, + mt9v032->sysclk / hratio); + if (ret < 0) + dev_warn(&client->dev, "failed to set pixel rate (%d)\n", ret); +} + static int mt9v032_set_format(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh, struct v4l2_subdev_format *format) @@ -395,6 +429,8 @@ static int mt9v032_set_format(struct v4l2_subdev *subdev, format->which); __format->width = __crop->width / hratio; __format->height = __crop->height / vratio; + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) + mt9v032_configure_pixel_rate(mt9v032, hratio); format->format = *__format; @@ -450,6 +486,8 @@ static int mt9v032_set_crop(struct v4l2_subdev *subdev, crop->which); __format->width = rect.width; __format->height = rect.height; + if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) + mt9v032_configure_pixel_rate(mt9v032, 1); } *__crop = rect; @@ -469,6 +507,7 @@ static int mt9v032_s_ctrl(struct v4l2_ctrl *ctrl) struct mt9v032 *mt9v032 = container_of(ctrl->handler, struct mt9v032, ctrls); struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + u32 freq; u16 data; switch (ctrl->id) { @@ -487,6 +526,24 @@ static int mt9v032_s_ctrl(struct v4l2_ctrl *ctrl) return mt9v032_write(client, MT9V032_TOTAL_SHUTTER_WIDTH, ctrl->val); + case V4L2_CID_HBLANK: + mt9v032->hblank = ctrl->val; + return mt9v032_update_hblank(mt9v032); + + case V4L2_CID_VBLANK: + return mt9v032_write(client, MT9V032_VERTICAL_BLANKING, + ctrl->val); + + case V4L2_CID_PIXEL_RATE: + case V4L2_CID_LINK_FREQ: + if (mt9v032->link_freq == NULL) + break; + + freq = mt9v032->pdata->link_freqs[mt9v032->link_freq->val]; + mt9v032->pixel_rate->val64 = freq; + mt9v032->sysclk = freq; + break; + case V4L2_CID_TEST_PATTERN: switch (ctrl->val) { case 0: @@ -598,6 +655,8 @@ static int mt9v032_registered(struct v4l2_subdev *subdev) dev_info(&client->dev, "MT9V032 detected at address 0x%02x\n", client->addr); + mt9v032_configure_pixel_rate(mt9v032, 1); + return ret; } @@ -663,6 +722,7 @@ static const struct v4l2_subdev_internal_ops mt9v032_subdev_internal_ops = { static int mt9v032_probe(struct i2c_client *client, const struct i2c_device_id *did) { + struct mt9v032_platform_data *pdata = client->dev.platform_data; struct mt9v032 *mt9v032; unsigned int i; int ret; @@ -679,9 +739,9 @@ static int mt9v032_probe(struct i2c_client *client, return -ENOMEM; mutex_init(&mt9v032->power_lock); - mt9v032->pdata = client->dev.platform_data; + mt9v032->pdata = pdata; - v4l2_ctrl_handler_init(&mt9v032->ctrls, ARRAY_SIZE(mt9v032_ctrls) + 4); + v4l2_ctrl_handler_init(&mt9v032->ctrls, ARRAY_SIZE(mt9v032_ctrls) + 8); v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, V4L2_CID_AUTOGAIN, 0, 1, 1, 1); @@ -695,6 +755,34 @@ static int mt9v032_probe(struct i2c_client *client, V4L2_CID_EXPOSURE, MT9V032_TOTAL_SHUTTER_WIDTH_MIN, MT9V032_TOTAL_SHUTTER_WIDTH_MAX, 1, MT9V032_TOTAL_SHUTTER_WIDTH_DEF); + v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_HBLANK, MT9V032_HORIZONTAL_BLANKING_MIN, + MT9V032_HORIZONTAL_BLANKING_MAX, 1, + MT9V032_HORIZONTAL_BLANKING_DEF); + v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_VBLANK, MT9V032_VERTICAL_BLANKING_MIN, + MT9V032_VERTICAL_BLANKING_MAX, 1, + MT9V032_VERTICAL_BLANKING_DEF); + + mt9v032->pixel_rate = + v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_PIXEL_RATE, 0, 0, 1, 0); + + if (pdata && pdata->link_freqs) { + unsigned int def = 0; + + for (i = 0; pdata->link_freqs[i]; ++i) { + if (pdata->link_freqs[i] == pdata->link_def_freq) + def = i; + } + + mt9v032->link_freq = + v4l2_ctrl_new_int_menu(&mt9v032->ctrls, + &mt9v032_ctrl_ops, + V4L2_CID_LINK_FREQ, i - 1, def, + pdata->link_freqs); + v4l2_ctrl_cluster(2, &mt9v032->link_freq); + } for (i = 0; i < ARRAY_SIZE(mt9v032_ctrls); ++i) v4l2_ctrl_new_custom(&mt9v032->ctrls, &mt9v032_ctrls[i], NULL); @@ -717,6 +805,8 @@ static int mt9v032_probe(struct i2c_client *client, mt9v032->format.colorspace = V4L2_COLORSPACE_SRGB; mt9v032->aec_agc = MT9V032_AEC_ENABLE | MT9V032_AGC_ENABLE; + mt9v032->hblank = MT9V032_HORIZONTAL_BLANKING_DEF; + mt9v032->sysclk = MT9V032_SYSCLK_FREQ_DEF; v4l2_i2c_subdev_init(&mt9v032->subdev, client, &mt9v032_subdev_ops); mt9v032->subdev.internal_ops = &mt9v032_subdev_internal_ops; diff --git a/drivers/media/video/noon010pc30.c b/drivers/media/i2c/noon010pc30.c similarity index 100% rename from drivers/media/video/noon010pc30.c rename to drivers/media/i2c/noon010pc30.c diff --git a/drivers/media/video/ov7670.c b/drivers/media/i2c/ov7670.c similarity index 100% rename from drivers/media/video/ov7670.c rename to drivers/media/i2c/ov7670.c diff --git a/drivers/media/i2c/s5k4ecgx.c b/drivers/media/i2c/s5k4ecgx.c new file mode 100644 index 0000000000000000000000000000000000000000..49c1b3abb4252c33fc8635f215ba080b640a73d1 --- /dev/null +++ b/drivers/media/i2c/s5k4ecgx.c @@ -0,0 +1,1036 @@ +/* + * Driver for Samsung S5K4ECGX 1/4" 5Mp CMOS Image Sensor SoC + * with an Embedded Image Signal Processor. + * + * Copyright (C) 2012, Linaro, Sangwook Lee + * Copyright (C) 2012, Insignal Co,. Ltd, Homin Lee + * + * Based on s5k6aa and noon010pc30 driver + * Copyright (C) 2011, Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +static int debug; +module_param(debug, int, 0644); + +#define S5K4ECGX_DRIVER_NAME "s5k4ecgx" +#define S5K4ECGX_FIRMWARE "s5k4ecgx.bin" + +/* Firmware revision information */ +#define REG_FW_REVISION 0x700001a6 +#define REG_FW_VERSION 0x700001a4 +#define S5K4ECGX_REVISION_1_1 0x11 +#define S5K4ECGX_FW_VERSION 0x4ec0 + +/* General purpose parameters */ +#define REG_USER_BRIGHTNESS 0x7000022c +#define REG_USER_CONTRAST 0x7000022e +#define REG_USER_SATURATION 0x70000230 + +#define REG_G_ENABLE_PREV 0x7000023e +#define REG_G_ENABLE_PREV_CHG 0x70000240 +#define REG_G_NEW_CFG_SYNC 0x7000024a +#define REG_G_PREV_IN_WIDTH 0x70000250 +#define REG_G_PREV_IN_HEIGHT 0x70000252 +#define REG_G_PREV_IN_XOFFS 0x70000254 +#define REG_G_PREV_IN_YOFFS 0x70000256 +#define REG_G_CAP_IN_WIDTH 0x70000258 +#define REG_G_CAP_IN_HEIGHT 0x7000025a +#define REG_G_CAP_IN_XOFFS 0x7000025c +#define REG_G_CAP_IN_YOFFS 0x7000025e +#define REG_G_INPUTS_CHANGE_REQ 0x70000262 +#define REG_G_ACTIVE_PREV_CFG 0x70000266 +#define REG_G_PREV_CFG_CHG 0x70000268 +#define REG_G_PREV_OPEN_AFTER_CH 0x7000026a + +/* Preview context register sets. n = 0...4. */ +#define PREG(n, x) ((n) * 0x30 + (x)) +#define REG_P_OUT_WIDTH(n) PREG(n, 0x700002a6) +#define REG_P_OUT_HEIGHT(n) PREG(n, 0x700002a8) +#define REG_P_FMT(n) PREG(n, 0x700002aa) +#define REG_P_PVI_MASK(n) PREG(n, 0x700002b4) +#define REG_P_FR_TIME_TYPE(n) PREG(n, 0x700002be) +#define FR_TIME_DYNAMIC 0 +#define FR_TIME_FIXED 1 +#define FR_TIME_FIXED_ACCURATE 2 +#define REG_P_FR_TIME_Q_TYPE(n) PREG(n, 0x700002c0) +#define FR_TIME_Q_DYNAMIC 0 +#define FR_TIME_Q_BEST_FRRATE 1 +#define FR_TIME_Q_BEST_QUALITY 2 + +/* Frame period in 0.1 ms units */ +#define REG_P_MAX_FR_TIME(n) PREG(n, 0x700002c2) +#define REG_P_MIN_FR_TIME(n) PREG(n, 0x700002c4) +#define US_TO_FR_TIME(__t) ((__t) / 100) +#define REG_P_PREV_MIRROR(n) PREG(n, 0x700002d0) +#define REG_P_CAP_MIRROR(n) PREG(n, 0x700002d2) + +#define REG_G_PREVZOOM_IN_WIDTH 0x70000494 +#define REG_G_PREVZOOM_IN_HEIGHT 0x70000496 +#define REG_G_PREVZOOM_IN_XOFFS 0x70000498 +#define REG_G_PREVZOOM_IN_YOFFS 0x7000049a +#define REG_G_CAPZOOM_IN_WIDTH 0x7000049c +#define REG_G_CAPZOOM_IN_HEIGHT 0x7000049e +#define REG_G_CAPZOOM_IN_XOFFS 0x700004a0 +#define REG_G_CAPZOOM_IN_YOFFS 0x700004a2 + +/* n = 0...4 */ +#define REG_USER_SHARPNESS(n) (0x70000a28 + (n) * 0xb6) + +/* Reduce sharpness range for user space API */ +#define SHARPNESS_DIV 8208 +#define TOK_TERM 0xffffffff + +/* + * FIXME: This is copied from s5k6aa, because of no information + * in the S5K4ECGX datasheet. + * H/W register Interface (0xd0000000 - 0xd0000fff) + */ +#define AHB_MSB_ADDR_PTR 0xfcfc +#define GEN_REG_OFFSH 0xd000 +#define REG_CMDWR_ADDRH 0x0028 +#define REG_CMDWR_ADDRL 0x002a +#define REG_CMDRD_ADDRH 0x002c +#define REG_CMDRD_ADDRL 0x002e +#define REG_CMDBUF0_ADDR 0x0f12 + +struct s5k4ecgx_frmsize { + struct v4l2_frmsize_discrete size; + /* Fixed sensor matrix crop rectangle */ + struct v4l2_rect input_window; +}; + +struct regval_list { + u32 addr; + u16 val; +}; + +/* + * TODO: currently only preview is supported and snapshot (capture) + * is not implemented yet + */ +static const struct s5k4ecgx_frmsize s5k4ecgx_prev_sizes[] = { + { + .size = { 176, 144 }, + .input_window = { 0x00, 0x00, 0x928, 0x780 }, + }, { + .size = { 352, 288 }, + .input_window = { 0x00, 0x00, 0x928, 0x780 }, + }, { + .size = { 640, 480 }, + .input_window = { 0x00, 0x00, 0xa00, 0x780 }, + }, { + .size = { 720, 480 }, + .input_window = { 0x00, 0x00, 0xa00, 0x6a8 }, + } +}; + +#define S5K4ECGX_NUM_PREV ARRAY_SIZE(s5k4ecgx_prev_sizes) + +struct s5k4ecgx_pixfmt { + enum v4l2_mbus_pixelcode code; + u32 colorspace; + /* REG_TC_PCFG_Format register value */ + u16 reg_p_format; +}; + +/* By default value, output from sensor will be YUV422 0-255 */ +static const struct s5k4ecgx_pixfmt s5k4ecgx_formats[] = { + { V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 5 }, +}; + +static const char * const s5k4ecgx_supply_names[] = { + /* + * Usually 2.8V is used for analog power (vdda) + * and digital IO (vddio, vdddcore) + */ + "vdda", + "vddio", + "vddcore", + "vddreg", /* The internal s5k4ecgx regulator's supply (1.8V) */ +}; + +#define S5K4ECGX_NUM_SUPPLIES ARRAY_SIZE(s5k4ecgx_supply_names) + +enum s5k4ecgx_gpio_id { + STBY, + RST, + GPIO_NUM, +}; + +struct s5k4ecgx { + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_ctrl_handler handler; + + struct s5k4ecgx_platform_data *pdata; + const struct s5k4ecgx_pixfmt *curr_pixfmt; + const struct s5k4ecgx_frmsize *curr_frmsize; + struct mutex lock; + u8 streaming; + u8 set_params; + + struct regulator_bulk_data supplies[S5K4ECGX_NUM_SUPPLIES]; + struct s5k4ecgx_gpio gpio[GPIO_NUM]; +}; + +static inline struct s5k4ecgx *to_s5k4ecgx(struct v4l2_subdev *sd) +{ + return container_of(sd, struct s5k4ecgx, sd); +} + +static int s5k4ecgx_i2c_read(struct i2c_client *client, u16 addr, u16 *val) +{ + u8 wbuf[2] = { addr >> 8, addr & 0xff }; + struct i2c_msg msg[2]; + u8 rbuf[2]; + int ret; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 2; + msg[0].buf = wbuf; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = 2; + msg[1].buf = rbuf; + + ret = i2c_transfer(client->adapter, msg, 2); + *val = be16_to_cpu(*((u16 *)rbuf)); + + v4l2_dbg(4, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val); + + return ret == 2 ? 0 : ret; +} + +static int s5k4ecgx_i2c_write(struct i2c_client *client, u16 addr, u16 val) +{ + u8 buf[4] = { addr >> 8, addr & 0xff, val >> 8, val & 0xff }; + + int ret = i2c_master_send(client, buf, 4); + v4l2_dbg(4, debug, client, "i2c_write: 0x%04x : 0x%04x\n", addr, val); + + return ret == 4 ? 0 : ret; +} + +static int s5k4ecgx_write(struct i2c_client *client, u32 addr, u16 val) +{ + u16 high = addr >> 16, low = addr & 0xffff; + int ret; + + v4l2_dbg(3, debug, client, "write: 0x%08x : 0x%04x\n", addr, val); + + ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRH, high); + if (!ret) + ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRL, low); + if (!ret) + ret = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val); + + return ret; +} + +static int s5k4ecgx_read(struct i2c_client *client, u32 addr, u16 *val) +{ + u16 high = addr >> 16, low = addr & 0xffff; + int ret; + + ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRH, high); + if (!ret) + ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRL, low); + if (!ret) + ret = s5k4ecgx_i2c_read(client, REG_CMDBUF0_ADDR, val); + if (!ret) + dev_err(&client->dev, "Failed to execute read command\n"); + + return ret; +} + +static int s5k4ecgx_read_fw_ver(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u16 hw_rev, fw_ver = 0; + int ret; + + ret = s5k4ecgx_read(client, REG_FW_VERSION, &fw_ver); + if (ret < 0 || fw_ver != S5K4ECGX_FW_VERSION) { + v4l2_err(sd, "FW version check failed!\n"); + return -ENODEV; + } + + ret = s5k4ecgx_read(client, REG_FW_REVISION, &hw_rev); + if (ret < 0) + return ret; + + v4l2_info(sd, "chip found FW ver: 0x%x, HW rev: 0x%x\n", + fw_ver, hw_rev); + return 0; +} + +static int s5k4ecgx_set_ahb_address(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + /* Set APB peripherals start address */ + ret = s5k4ecgx_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH); + if (ret < 0) + return ret; + /* + * FIXME: This is copied from s5k6aa, because of no information + * in s5k4ecgx's datasheet. + * sw_reset is activated to put device into idle status + */ + ret = s5k4ecgx_i2c_write(client, 0x0010, 0x0001); + if (ret < 0) + return ret; + + ret = s5k4ecgx_i2c_write(client, 0x1030, 0x0000); + if (ret < 0) + return ret; + /* Halt ARM CPU */ + return s5k4ecgx_i2c_write(client, 0x0014, 0x0001); +} + +#define FW_CRC_SIZE 4 +/* Register address, value are 4, 2 bytes */ +#define FW_RECORD_SIZE 6 +/* + * The firmware has following format: + * < total number of records (4 bytes + 2 bytes padding) N >, + * < record 0 >, ..., < record N - 1 >, < CRC32-CCITT (4-bytes) >, + * where "record" is a 4-byte register address followed by 2-byte + * register value (little endian). + * The firmware generator can be found in following git repository: + * git://git.linaro.org/people/sangwook/fimc-v4l2-app.git + */ +static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + const struct firmware *fw; + const u8 *ptr; + int err, i, regs_num; + u32 addr, crc, crc_file, addr_inc = 0; + u16 val; + + err = request_firmware(&fw, S5K4ECGX_FIRMWARE, sd->v4l2_dev->dev); + if (err) { + v4l2_err(sd, "Failed to read firmware %s\n", S5K4ECGX_FIRMWARE); + return err; + } + regs_num = le32_to_cpu(get_unaligned_le32(fw->data)); + + v4l2_dbg(3, debug, sd, "FW: %s size %d register sets %d\n", + S5K4ECGX_FIRMWARE, fw->size, regs_num); + + regs_num++; /* Add header */ + if (fw->size != regs_num * FW_RECORD_SIZE + FW_CRC_SIZE) { + err = -EINVAL; + goto fw_out; + } + crc_file = le32_to_cpu(get_unaligned_le32(fw->data + + regs_num * FW_RECORD_SIZE)); + crc = crc32_le(~0, fw->data, regs_num * FW_RECORD_SIZE); + if (crc != crc_file) { + v4l2_err(sd, "FW: invalid crc (%#x:%#x)\n", crc, crc_file); + err = -EINVAL; + goto fw_out; + } + ptr = fw->data + FW_RECORD_SIZE; + for (i = 1; i < regs_num; i++) { + addr = le32_to_cpu(get_unaligned_le32(ptr)); + ptr += sizeof(u32); + val = le16_to_cpu(get_unaligned_le16(ptr)); + ptr += sizeof(u16); + if (addr - addr_inc != 2) + err = s5k4ecgx_write(client, addr, val); + else + err = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val); + if (err) + break; + addr_inc = addr; + } +fw_out: + release_firmware(fw); + return err; +} + +/* Set preview and capture input window */ +static int s5k4ecgx_set_input_window(struct i2c_client *c, + const struct v4l2_rect *r) +{ + int ret; + + ret = s5k4ecgx_write(c, REG_G_PREV_IN_WIDTH, r->width); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_PREV_IN_HEIGHT, r->height); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_PREV_IN_XOFFS, r->left); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_PREV_IN_YOFFS, r->top); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAP_IN_WIDTH, r->width); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAP_IN_HEIGHT, r->height); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAP_IN_XOFFS, r->left); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAP_IN_YOFFS, r->top); + + return ret; +} + +/* Set preview and capture zoom input window */ +static int s5k4ecgx_set_zoom_window(struct i2c_client *c, + const struct v4l2_rect *r) +{ + int ret; + + ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_WIDTH, r->width); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_HEIGHT, r->height); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_XOFFS, r->left); + if (!ret) + ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_YOFFS, r->top); + + return ret; +} + +static int s5k4ecgx_set_output_framefmt(struct s5k4ecgx *priv) +{ + struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); + int ret; + + ret = s5k4ecgx_write(client, REG_P_OUT_WIDTH(0), + priv->curr_frmsize->size.width); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_OUT_HEIGHT(0), + priv->curr_frmsize->size.height); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_FMT(0), + priv->curr_pixfmt->reg_p_format); + return ret; +} + +static int s5k4ecgx_init_sensor(struct v4l2_subdev *sd) +{ + int ret; + + ret = s5k4ecgx_set_ahb_address(sd); + + /* The delay is from manufacturer's settings */ + msleep(100); + + if (!ret) + ret = s5k4ecgx_load_firmware(sd); + if (ret) + v4l2_err(sd, "Failed to write initial settings\n"); + + return ret; +} + +static int s5k4ecgx_gpio_set_value(struct s5k4ecgx *priv, int id, u32 val) +{ + if (!gpio_is_valid(priv->gpio[id].gpio)) + return 0; + gpio_set_value(priv->gpio[id].gpio, val); + + return 1; +} + +static int __s5k4ecgx_power_on(struct s5k4ecgx *priv) +{ + int ret; + + ret = regulator_bulk_enable(S5K4ECGX_NUM_SUPPLIES, priv->supplies); + if (ret) + return ret; + usleep_range(30, 50); + + /* The polarity of STBY is controlled by TSP */ + if (s5k4ecgx_gpio_set_value(priv, STBY, priv->gpio[STBY].level)) + usleep_range(30, 50); + + if (s5k4ecgx_gpio_set_value(priv, RST, priv->gpio[RST].level)) + usleep_range(30, 50); + + return 0; +} + +static int __s5k4ecgx_power_off(struct s5k4ecgx *priv) +{ + if (s5k4ecgx_gpio_set_value(priv, RST, !priv->gpio[RST].level)) + usleep_range(30, 50); + + if (s5k4ecgx_gpio_set_value(priv, STBY, !priv->gpio[STBY].level)) + usleep_range(30, 50); + + priv->streaming = 0; + + return regulator_bulk_disable(S5K4ECGX_NUM_SUPPLIES, priv->supplies); +} + +/* Find nearest matching image pixel size. */ +static int s5k4ecgx_try_frame_size(struct v4l2_mbus_framefmt *mf, + const struct s5k4ecgx_frmsize **size) +{ + unsigned int min_err = ~0; + int i = ARRAY_SIZE(s5k4ecgx_prev_sizes); + const struct s5k4ecgx_frmsize *fsize = &s5k4ecgx_prev_sizes[0], + *match = NULL; + + while (i--) { + int err = abs(fsize->size.width - mf->width) + + abs(fsize->size.height - mf->height); + if (err < min_err) { + min_err = err; + match = fsize; + } + fsize++; + } + if (match) { + mf->width = match->size.width; + mf->height = match->size.height; + if (size) + *size = match; + return 0; + } + + return -EINVAL; +} + +static int s5k4ecgx_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(s5k4ecgx_formats)) + return -EINVAL; + code->code = s5k4ecgx_formats[code->index].code; + + return 0; +} + +static int s5k4ecgx_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + struct v4l2_mbus_framefmt *mf; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + if (fh) { + mf = v4l2_subdev_get_try_format(fh, 0); + fmt->format = *mf; + } + return 0; + } + + mf = &fmt->format; + + mutex_lock(&priv->lock); + mf->width = priv->curr_frmsize->size.width; + mf->height = priv->curr_frmsize->size.height; + mf->code = priv->curr_pixfmt->code; + mf->colorspace = priv->curr_pixfmt->colorspace; + mf->field = V4L2_FIELD_NONE; + mutex_unlock(&priv->lock); + + return 0; +} + +static const struct s5k4ecgx_pixfmt *s5k4ecgx_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + int i = ARRAY_SIZE(s5k4ecgx_formats); + + while (--i) + if (mf->code == s5k4ecgx_formats[i].code) + break; + mf->code = s5k4ecgx_formats[i].code; + + return &s5k4ecgx_formats[i]; +} + +static int s5k4ecgx_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + const struct s5k4ecgx_frmsize *fsize = NULL; + const struct s5k4ecgx_pixfmt *pf; + struct v4l2_mbus_framefmt *mf; + int ret = 0; + + pf = s5k4ecgx_try_fmt(sd, &fmt->format); + s5k4ecgx_try_frame_size(&fmt->format, &fsize); + fmt->format.colorspace = V4L2_COLORSPACE_JPEG; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + if (fh) { + mf = v4l2_subdev_get_try_format(fh, 0); + *mf = fmt->format; + } + return 0; + } + + mutex_lock(&priv->lock); + if (!priv->streaming) { + priv->curr_frmsize = fsize; + priv->curr_pixfmt = pf; + priv->set_params = 1; + } else { + ret = -EBUSY; + } + mutex_unlock(&priv->lock); + + return ret; +} + +static const struct v4l2_subdev_pad_ops s5k4ecgx_pad_ops = { + .enum_mbus_code = s5k4ecgx_enum_mbus_code, + .get_fmt = s5k4ecgx_get_fmt, + .set_fmt = s5k4ecgx_set_fmt, +}; + +/* + * V4L2 subdev controls + */ +static int s5k4ecgx_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = &container_of(ctrl->handler, struct s5k4ecgx, + handler)->sd; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + unsigned int i; + int err = 0; + + v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val); + + mutex_lock(&priv->lock); + switch (ctrl->id) { + case V4L2_CID_CONTRAST: + err = s5k4ecgx_write(client, REG_USER_CONTRAST, ctrl->val); + break; + + case V4L2_CID_SATURATION: + err = s5k4ecgx_write(client, REG_USER_SATURATION, ctrl->val); + break; + + case V4L2_CID_SHARPNESS: + /* TODO: Revisit, is this setting for all presets ? */ + for (i = 0; i < 4 && !err; i++) + err = s5k4ecgx_write(client, REG_USER_SHARPNESS(i), + ctrl->val * SHARPNESS_DIV); + break; + + case V4L2_CID_BRIGHTNESS: + err = s5k4ecgx_write(client, REG_USER_BRIGHTNESS, ctrl->val); + break; + } + mutex_unlock(&priv->lock); + if (err < 0) + v4l2_err(sd, "Failed to write s_ctrl err %d\n", err); + + return err; +} + +static const struct v4l2_ctrl_ops s5k4ecgx_ctrl_ops = { + .s_ctrl = s5k4ecgx_s_ctrl, +}; + +/* + * Reading s5k4ecgx version information + */ +static int s5k4ecgx_registered(struct v4l2_subdev *sd) +{ + int ret; + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + + mutex_lock(&priv->lock); + ret = __s5k4ecgx_power_on(priv); + if (!ret) { + ret = s5k4ecgx_read_fw_ver(sd); + __s5k4ecgx_power_off(priv); + } + mutex_unlock(&priv->lock); + + return ret; +} + +/* + * V4L2 subdev internal operations + */ +static int s5k4ecgx_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(fh, 0); + + mf->width = s5k4ecgx_prev_sizes[0].size.width; + mf->height = s5k4ecgx_prev_sizes[0].size.height; + mf->code = s5k4ecgx_formats[0].code; + mf->colorspace = V4L2_COLORSPACE_JPEG; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static const struct v4l2_subdev_internal_ops s5k4ecgx_subdev_internal_ops = { + .registered = s5k4ecgx_registered, + .open = s5k4ecgx_open, +}; + +static int s5k4ecgx_s_power(struct v4l2_subdev *sd, int on) +{ + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + int ret; + + v4l2_dbg(1, debug, sd, "Switching %s\n", on ? "on" : "off"); + + if (on) { + ret = __s5k4ecgx_power_on(priv); + if (ret < 0) + return ret; + /* Time to stabilize sensor */ + msleep(100); + ret = s5k4ecgx_init_sensor(sd); + if (ret < 0) + __s5k4ecgx_power_off(priv); + else + priv->set_params = 1; + } else { + ret = __s5k4ecgx_power_off(priv); + } + + return ret; +} + +static int s5k4ecgx_log_status(struct v4l2_subdev *sd) +{ + v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name); + + return 0; +} + +static const struct v4l2_subdev_core_ops s5k4ecgx_core_ops = { + .s_power = s5k4ecgx_s_power, + .log_status = s5k4ecgx_log_status, +}; + +static int __s5k4ecgx_s_params(struct s5k4ecgx *priv) +{ + struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); + const struct v4l2_rect *crop_rect = &priv->curr_frmsize->input_window; + int ret; + + ret = s5k4ecgx_set_input_window(client, crop_rect); + if (!ret) + ret = s5k4ecgx_set_zoom_window(client, crop_rect); + if (!ret) + ret = s5k4ecgx_write(client, REG_G_INPUTS_CHANGE_REQ, 1); + if (!ret) + ret = s5k4ecgx_write(client, 0x70000a1e, 0x28); + if (!ret) + ret = s5k4ecgx_write(client, 0x70000ad4, 0x3c); + if (!ret) + ret = s5k4ecgx_set_output_framefmt(priv); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_PVI_MASK(0), 0x52); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_FR_TIME_TYPE(0), + FR_TIME_DYNAMIC); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_FR_TIME_Q_TYPE(0), + FR_TIME_Q_BEST_FRRATE); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_MIN_FR_TIME(0), + US_TO_FR_TIME(33300)); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_MAX_FR_TIME(0), + US_TO_FR_TIME(66600)); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_PREV_MIRROR(0), 0); + if (!ret) + ret = s5k4ecgx_write(client, REG_P_CAP_MIRROR(0), 0); + if (!ret) + ret = s5k4ecgx_write(client, REG_G_ACTIVE_PREV_CFG, 0); + if (!ret) + ret = s5k4ecgx_write(client, REG_G_PREV_OPEN_AFTER_CH, 1); + if (!ret) + ret = s5k4ecgx_write(client, REG_G_NEW_CFG_SYNC, 1); + if (!ret) + ret = s5k4ecgx_write(client, REG_G_PREV_CFG_CHG, 1); + + return ret; +} + +static int __s5k4ecgx_s_stream(struct s5k4ecgx *priv, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); + int ret; + + if (on && priv->set_params) { + ret = __s5k4ecgx_s_params(priv); + if (ret < 0) + return ret; + priv->set_params = 0; + } + /* + * This enables/disables preview stream only. Capture requests + * are not supported yet. + */ + ret = s5k4ecgx_write(client, REG_G_ENABLE_PREV, on); + if (ret < 0) + return ret; + return s5k4ecgx_write(client, REG_G_ENABLE_PREV_CHG, 1); +} + +static int s5k4ecgx_s_stream(struct v4l2_subdev *sd, int on) +{ + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + int ret = 0; + + v4l2_dbg(1, debug, sd, "Turn streaming %s\n", on ? "on" : "off"); + + mutex_lock(&priv->lock); + + if (priv->streaming == !on) { + ret = __s5k4ecgx_s_stream(priv, on); + if (!ret) + priv->streaming = on & 1; + } + + mutex_unlock(&priv->lock); + return ret; +} + +static const struct v4l2_subdev_video_ops s5k4ecgx_video_ops = { + .s_stream = s5k4ecgx_s_stream, +}; + +static const struct v4l2_subdev_ops s5k4ecgx_ops = { + .core = &s5k4ecgx_core_ops, + .pad = &s5k4ecgx_pad_ops, + .video = &s5k4ecgx_video_ops, +}; + +/* + * GPIO setup + */ +static int s5k4ecgx_config_gpio(int nr, int val, const char *name) +{ + unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; + int ret; + + if (!gpio_is_valid(nr)) + return 0; + ret = gpio_request_one(nr, flags, name); + if (!ret) + gpio_export(nr, 0); + + return ret; +} + +static void s5k4ecgx_free_gpios(struct s5k4ecgx *priv) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(priv->gpio); i++) { + if (!gpio_is_valid(priv->gpio[i].gpio)) + continue; + gpio_free(priv->gpio[i].gpio); + priv->gpio[i].gpio = -EINVAL; + } +} + +static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv, + const struct s5k4ecgx_platform_data *pdata) +{ + const struct s5k4ecgx_gpio *gpio = &pdata->gpio_stby; + int ret; + + priv->gpio[STBY].gpio = -EINVAL; + priv->gpio[RST].gpio = -EINVAL; + + ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_STBY"); + + if (ret) { + s5k4ecgx_free_gpios(priv); + return ret; + } + priv->gpio[STBY] = *gpio; + if (gpio_is_valid(gpio->gpio)) + gpio_set_value(gpio->gpio, 0); + + gpio = &pdata->gpio_reset; + + ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_RST"); + if (ret) { + s5k4ecgx_free_gpios(priv); + return ret; + } + priv->gpio[RST] = *gpio; + if (gpio_is_valid(gpio->gpio)) + gpio_set_value(gpio->gpio, 0); + + return 0; +} + +static int s5k4ecgx_init_v4l2_ctrls(struct s5k4ecgx *priv) +{ + const struct v4l2_ctrl_ops *ops = &s5k4ecgx_ctrl_ops; + struct v4l2_ctrl_handler *hdl = &priv->handler; + int ret; + + ret = v4l2_ctrl_handler_init(hdl, 4); + if (ret) + return ret; + + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -208, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0); + + /* Sharpness default is 24612, and then (24612/SHARPNESS_DIV) = 2 */ + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -32704/SHARPNESS_DIV, + 24612/SHARPNESS_DIV, 1, 2); + if (hdl->error) { + ret = hdl->error; + v4l2_ctrl_handler_free(hdl); + return ret; + } + priv->sd.ctrl_handler = hdl; + + return 0; +}; + +static int s5k4ecgx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct s5k4ecgx_platform_data *pdata = client->dev.platform_data; + struct v4l2_subdev *sd; + struct s5k4ecgx *priv; + int ret, i; + + if (pdata == NULL) { + dev_err(&client->dev, "platform data is missing!\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&client->dev, sizeof(struct s5k4ecgx), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->lock); + priv->streaming = 0; + + sd = &priv->sd; + /* Registering subdev */ + v4l2_i2c_subdev_init(sd, client, &s5k4ecgx_ops); + strlcpy(sd->name, S5K4ECGX_DRIVER_NAME, sizeof(sd->name)); + + sd->internal_ops = &s5k4ecgx_subdev_internal_ops; + /* Support v4l2 sub-device user space API */ + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + priv->pad.flags = MEDIA_PAD_FL_SOURCE; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + ret = media_entity_init(&sd->entity, 1, &priv->pad, 0); + if (ret) + return ret; + + ret = s5k4ecgx_config_gpios(priv, pdata); + if (ret) { + dev_err(&client->dev, "Failed to set gpios\n"); + goto out_err1; + } + for (i = 0; i < S5K4ECGX_NUM_SUPPLIES; i++) + priv->supplies[i].supply = s5k4ecgx_supply_names[i]; + + ret = devm_regulator_bulk_get(&client->dev, S5K4ECGX_NUM_SUPPLIES, + priv->supplies); + if (ret) { + dev_err(&client->dev, "Failed to get regulators\n"); + goto out_err2; + } + ret = s5k4ecgx_init_v4l2_ctrls(priv); + if (ret) + goto out_err2; + + priv->curr_pixfmt = &s5k4ecgx_formats[0]; + priv->curr_frmsize = &s5k4ecgx_prev_sizes[0]; + + return 0; + +out_err2: + s5k4ecgx_free_gpios(priv); +out_err1: + media_entity_cleanup(&priv->sd.entity); + + return ret; +} + +static int s5k4ecgx_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct s5k4ecgx *priv = to_s5k4ecgx(sd); + + mutex_destroy(&priv->lock); + s5k4ecgx_free_gpios(priv); + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&priv->handler); + media_entity_cleanup(&sd->entity); + + return 0; +} + +static const struct i2c_device_id s5k4ecgx_id[] = { + { S5K4ECGX_DRIVER_NAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, s5k4ecgx_id); + +static struct i2c_driver v4l2_i2c_driver = { + .driver = { + .owner = THIS_MODULE, + .name = S5K4ECGX_DRIVER_NAME, + }, + .probe = s5k4ecgx_probe, + .remove = s5k4ecgx_remove, + .id_table = s5k4ecgx_id, +}; + +module_i2c_driver(v4l2_i2c_driver); + +MODULE_DESCRIPTION("Samsung S5K4ECGX 5MP SOC camera"); +MODULE_AUTHOR("Sangwook Lee "); +MODULE_AUTHOR("Seok-Young Jang "); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(S5K4ECGX_FIRMWARE); diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/i2c/s5k6aa.c similarity index 99% rename from drivers/media/video/s5k6aa.c rename to drivers/media/i2c/s5k6aa.c index 6625e46a4638d5a0e916d3ff91fdbeb6dd8355fc..57cd4fa0193d4e0b554ead5d22be85d415007903 100644 --- a/drivers/media/video/s5k6aa.c +++ b/drivers/media/i2c/s5k6aa.c @@ -1061,10 +1061,9 @@ __s5k6aa_get_crop_rect(struct s5k6aa *s5k6aa, struct v4l2_subdev_fh *fh, { if (which == V4L2_SUBDEV_FORMAT_ACTIVE) return &s5k6aa->ccd_rect; - if (which == V4L2_SUBDEV_FORMAT_TRY) - return v4l2_subdev_get_try_crop(fh, 0); - return NULL; + WARN_ON(which != V4L2_SUBDEV_FORMAT_TRY); + return v4l2_subdev_get_try_crop(fh, 0); } static void s5k6aa_try_format(struct s5k6aa *s5k6aa, @@ -1169,12 +1168,10 @@ static int s5k6aa_get_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_rect *rect; memset(crop->reserved, 0, sizeof(crop->reserved)); - mutex_lock(&s5k6aa->lock); + mutex_lock(&s5k6aa->lock); rect = __s5k6aa_get_crop_rect(s5k6aa, fh, crop->which); - if (rect) - crop->rect = *rect; - + crop->rect = *rect; mutex_unlock(&s5k6aa->lock); v4l2_dbg(1, debug, sd, "Current crop rectangle: (%d,%d)/%dx%d\n", @@ -1436,7 +1433,7 @@ static int s5k6aa_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) return 0; } -int s5k6aa_check_fw_revision(struct s5k6aa *s5k6aa) +static int s5k6aa_check_fw_revision(struct s5k6aa *s5k6aa) { struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); u16 api_ver = 0, fw_rev = 0; @@ -1568,7 +1565,7 @@ static int s5k6aa_probe(struct i2c_client *client, return -EINVAL; } - s5k6aa = kzalloc(sizeof(*s5k6aa), GFP_KERNEL); + s5k6aa = devm_kzalloc(&client->dev, sizeof(*s5k6aa), GFP_KERNEL); if (!s5k6aa) return -ENOMEM; @@ -1592,7 +1589,7 @@ static int s5k6aa_probe(struct i2c_client *client, sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; ret = media_entity_init(&sd->entity, 1, &s5k6aa->pad, 0); if (ret) - goto out_err1; + return ret; ret = s5k6aa_configure_gpios(s5k6aa, pdata); if (ret) @@ -1627,8 +1624,6 @@ static int s5k6aa_probe(struct i2c_client *client, s5k6aa_free_gpios(s5k6aa); out_err2: media_entity_cleanup(&s5k6aa->sd.entity); -out_err1: - kfree(s5k6aa); return ret; } @@ -1642,7 +1637,6 @@ static int s5k6aa_remove(struct i2c_client *client) media_entity_cleanup(&sd->entity); regulator_bulk_free(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies); s5k6aa_free_gpios(s5k6aa); - kfree(s5k6aa); return 0; } diff --git a/drivers/media/video/saa6588.c b/drivers/media/i2c/saa6588.c similarity index 100% rename from drivers/media/video/saa6588.c rename to drivers/media/i2c/saa6588.c diff --git a/drivers/media/video/saa7110.c b/drivers/media/i2c/saa7110.c similarity index 100% rename from drivers/media/video/saa7110.c rename to drivers/media/i2c/saa7110.c diff --git a/drivers/media/video/saa7115.c b/drivers/media/i2c/saa7115.c similarity index 99% rename from drivers/media/video/saa7115.c rename to drivers/media/i2c/saa7115.c index 2107336cd8369cd055e5d43362349fc936d4518e..6b6788cd08f6d6862020d0ab8d6b76e40fbb1402 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/i2c/saa7115.c @@ -1066,7 +1066,8 @@ static int saa711x_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_f }; int i; - memset(sliced, 0, sizeof(*sliced)); + memset(sliced->service_lines, 0, sizeof(sliced->service_lines)); + sliced->service_set = 0; /* done if using raw VBI */ if (saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10) return 0; diff --git a/drivers/media/video/saa711x_regs.h b/drivers/media/i2c/saa711x_regs.h similarity index 100% rename from drivers/media/video/saa711x_regs.h rename to drivers/media/i2c/saa711x_regs.h diff --git a/drivers/media/video/saa7127.c b/drivers/media/i2c/saa7127.c similarity index 99% rename from drivers/media/video/saa7127.c rename to drivers/media/i2c/saa7127.c index 39c90b08eea8c4715b9a0b525a6ed5f8dfda23ca..b745f68fbc92d9c1c142a5a712f61180c928dd28 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/i2c/saa7127.c @@ -364,10 +364,7 @@ static int saa7127_set_vps(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_ state->vps_data[2] = data->data[9]; state->vps_data[3] = data->data[10]; state->vps_data[4] = data->data[11]; - v4l2_dbg(1, debug, sd, "Set VPS data %02x %02x %02x %02x %02x\n", - state->vps_data[0], state->vps_data[1], - state->vps_data[2], state->vps_data[3], - state->vps_data[4]); + v4l2_dbg(1, debug, sd, "Set VPS data %*ph\n", 5, state->vps_data); saa7127_write(sd, 0x55, state->vps_data[0]); saa7127_write(sd, 0x56, state->vps_data[1]); saa7127_write(sd, 0x57, state->vps_data[2]); @@ -628,7 +625,7 @@ static int saa7127_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_f { struct saa7127_state *state = to_state(sd); - memset(fmt, 0, sizeof(*fmt)); + memset(fmt->service_lines, 0, sizeof(fmt->service_lines)); if (state->vps_enable) fmt->service_lines[0][16] = V4L2_SLICED_VPS; if (state->wss_enable) diff --git a/drivers/media/video/saa717x.c b/drivers/media/i2c/saa717x.c similarity index 100% rename from drivers/media/video/saa717x.c rename to drivers/media/i2c/saa717x.c diff --git a/drivers/media/video/saa7185.c b/drivers/media/i2c/saa7185.c similarity index 100% rename from drivers/media/video/saa7185.c rename to drivers/media/i2c/saa7185.c diff --git a/drivers/media/video/saa7191.c b/drivers/media/i2c/saa7191.c similarity index 100% rename from drivers/media/video/saa7191.c rename to drivers/media/i2c/saa7191.c diff --git a/drivers/media/video/saa7191.h b/drivers/media/i2c/saa7191.h similarity index 100% rename from drivers/media/video/saa7191.h rename to drivers/media/i2c/saa7191.h diff --git a/drivers/media/video/smiapp-pll.c b/drivers/media/i2c/smiapp-pll.c similarity index 99% rename from drivers/media/video/smiapp-pll.c rename to drivers/media/i2c/smiapp-pll.c index a2e41a21dc65908f93a448f8b4eb68b4186424af..a577614bd84f53113470c085e4e1cd221d761a14 100644 --- a/drivers/media/video/smiapp-pll.c +++ b/drivers/media/i2c/smiapp-pll.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/smiapp-pll.c + * drivers/media/i2c/smiapp-pll.c * * Generic driver for SMIA/SMIA++ compliant camera modules * diff --git a/drivers/media/video/smiapp-pll.h b/drivers/media/i2c/smiapp-pll.h similarity index 98% rename from drivers/media/video/smiapp-pll.h rename to drivers/media/i2c/smiapp-pll.h index 9eab63f23afb1a31c33448dfc25059d55e9d3eba..cb2d2db5d02def416e10e3d638df33079655500f 100644 --- a/drivers/media/video/smiapp-pll.h +++ b/drivers/media/i2c/smiapp-pll.h @@ -1,5 +1,5 @@ /* - * drivers/media/video/smiapp-pll.h + * drivers/media/i2c/smiapp-pll.h * * Generic driver for SMIA/SMIA++ compliant camera modules * diff --git a/drivers/media/video/smiapp/Kconfig b/drivers/media/i2c/smiapp/Kconfig similarity index 100% rename from drivers/media/video/smiapp/Kconfig rename to drivers/media/i2c/smiapp/Kconfig diff --git a/drivers/media/video/smiapp/Makefile b/drivers/media/i2c/smiapp/Makefile similarity index 78% rename from drivers/media/video/smiapp/Makefile rename to drivers/media/i2c/smiapp/Makefile index 36b0cfa2c541e6b7fcb5a344d2d22fee6266ccb1..f45a003cbe7e3dbbedfc5d87882389c8d666650a 100644 --- a/drivers/media/video/smiapp/Makefile +++ b/drivers/media/i2c/smiapp/Makefile @@ -2,4 +2,4 @@ smiapp-objs += smiapp-core.o smiapp-regs.o \ smiapp-quirk.o smiapp-limits.o obj-$(CONFIG_VIDEO_SMIAPP) += smiapp.o -ccflags-y += -Idrivers/media/video +ccflags-y += -Idrivers/media/i2c diff --git a/drivers/media/video/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c similarity index 98% rename from drivers/media/video/smiapp/smiapp-core.c rename to drivers/media/i2c/smiapp/smiapp-core.c index bfd47c10613433fa50990ea6b13f6a00b09db5fd..e08e588ad24b5f90808279629bf9c80a2c22aecc 100644 --- a/drivers/media/video/smiapp/smiapp-core.c +++ b/drivers/media/i2c/smiapp/smiapp-core.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/smiapp/smiapp-core.c + * drivers/media/i2c/smiapp/smiapp-core.c * * Generic driver for SMIA/SMIA++ compliant camera modules * @@ -777,7 +777,11 @@ static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor) dev_dbg(&client->dev, "jolly good! %d\n", j); sensor->default_mbus_frame_fmts |= 1 << j; - if (!sensor->csi_format) { + if (!sensor->csi_format + || f->width > sensor->csi_format->width + || (f->width == sensor->csi_format->width + && f->compressed + > sensor->csi_format->compressed)) { sensor->csi_format = f; sensor->internal_csi_format = f; } @@ -2207,6 +2211,21 @@ smiapp_sysfs_nvm_read(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR(nvm, S_IRUGO, smiapp_sysfs_nvm_read, NULL); +static ssize_t +smiapp_sysfs_ident_read(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev)); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_module_info *minfo = &sensor->minfo; + + return snprintf(buf, PAGE_SIZE, "%2.2x%4.4x%2.2x\n", + minfo->manufacturer_id, minfo->model_id, + minfo->revision_number_major) + 1; +} + +static DEVICE_ATTR(ident, S_IRUGO, smiapp_sysfs_ident_read, NULL); + /* ----------------------------------------------------------------------------- * V4L2 subdev core operations */ @@ -2355,20 +2374,19 @@ static int smiapp_registered(struct v4l2_subdev *subdev) unsigned int i; int rval; - sensor->vana = regulator_get(&client->dev, "VANA"); + sensor->vana = devm_regulator_get(&client->dev, "VANA"); if (IS_ERR(sensor->vana)) { dev_err(&client->dev, "could not get regulator for vana\n"); return -ENODEV; } if (!sensor->platform_data->set_xclk) { - sensor->ext_clk = clk_get(&client->dev, - sensor->platform_data->ext_clk_name); + sensor->ext_clk = devm_clk_get(&client->dev, + sensor->platform_data->ext_clk_name); if (IS_ERR(sensor->ext_clk)) { dev_err(&client->dev, "could not get clock %s\n", sensor->platform_data->ext_clk_name); - rval = -ENODEV; - goto out_clk_get; + return -ENODEV; } rval = clk_set_rate(sensor->ext_clk, @@ -2378,8 +2396,7 @@ static int smiapp_registered(struct v4l2_subdev *subdev) "unable to set clock %s freq to %u\n", sensor->platform_data->ext_clk_name, sensor->platform_data->ext_clk); - rval = -ENODEV; - goto out_clk_set_rate; + return -ENODEV; } } @@ -2389,8 +2406,7 @@ static int smiapp_registered(struct v4l2_subdev *subdev) dev_err(&client->dev, "unable to acquire reset gpio %d\n", sensor->platform_data->xshutdown); - rval = -ENODEV; - goto out_clk_set_rate; + return -ENODEV; } } @@ -2466,22 +2482,27 @@ static int smiapp_registered(struct v4l2_subdev *subdev) sensor->binning_horizontal = 1; sensor->binning_vertical = 1; + if (device_create_file(&client->dev, &dev_attr_ident) != 0) { + dev_err(&client->dev, "sysfs ident entry creation failed\n"); + rval = -ENOENT; + goto out_power_off; + } /* SMIA++ NVM initialization - it will be read from the sensor * when it is first requested by userspace. */ if (sensor->minfo.smiapp_version && sensor->platform_data->nvm_size) { - sensor->nvm = kzalloc(sensor->platform_data->nvm_size, - GFP_KERNEL); + sensor->nvm = devm_kzalloc(&client->dev, + sensor->platform_data->nvm_size, GFP_KERNEL); if (sensor->nvm == NULL) { dev_err(&client->dev, "nvm buf allocation failed\n"); rval = -ENOMEM; - goto out_power_off; + goto out_ident_release; } if (device_create_file(&client->dev, &dev_attr_nvm) != 0) { dev_err(&client->dev, "sysfs nvm entry failed\n"); rval = -EBUSY; - goto out_power_off; + goto out_ident_release; } } @@ -2636,22 +2657,16 @@ static int smiapp_registered(struct v4l2_subdev *subdev) out_nvm_release: device_remove_file(&client->dev, &dev_attr_nvm); +out_ident_release: + device_remove_file(&client->dev, &dev_attr_ident); + out_power_off: - kfree(sensor->nvm); - sensor->nvm = NULL; smiapp_power_off(sensor); out_smiapp_power_on: if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) gpio_free(sensor->platform_data->xshutdown); -out_clk_set_rate: - clk_put(sensor->ext_clk); - sensor->ext_clk = NULL; - -out_clk_get: - regulator_put(sensor->vana); - sensor->vana = NULL; return rval; } @@ -2801,12 +2816,11 @@ static int smiapp_probe(struct i2c_client *client, const struct i2c_device_id *devid) { struct smiapp_sensor *sensor; - int rval; if (client->dev.platform_data == NULL) return -ENODEV; - sensor = kzalloc(sizeof(*sensor), GFP_KERNEL); + sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL); if (sensor == NULL) return -ENOMEM; @@ -2821,12 +2835,8 @@ static int smiapp_probe(struct i2c_client *client, sensor->src->sensor = sensor; sensor->src->pads[0].flags = MEDIA_PAD_FL_SOURCE; - rval = media_entity_init(&sensor->src->sd.entity, 2, + return media_entity_init(&sensor->src->sd.entity, 2, sensor->src->pads, 0); - if (rval < 0) - kfree(sensor); - - return rval; } static int __exit smiapp_remove(struct i2c_client *client) @@ -2845,10 +2855,9 @@ static int __exit smiapp_remove(struct i2c_client *client) sensor->power_count = 0; } - if (sensor->nvm) { + device_remove_file(&client->dev, &dev_attr_ident); + if (sensor->nvm) device_remove_file(&client->dev, &dev_attr_nvm); - kfree(sensor->nvm); - } for (i = 0; i < sensor->ssds_used; i++) { media_entity_cleanup(&sensor->ssds[i].sd.entity); @@ -2857,12 +2866,6 @@ static int __exit smiapp_remove(struct i2c_client *client) smiapp_free_controls(sensor); if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) gpio_free(sensor->platform_data->xshutdown); - if (sensor->ext_clk) - clk_put(sensor->ext_clk); - if (sensor->vana) - regulator_put(sensor->vana); - - kfree(sensor); return 0; } diff --git a/drivers/media/video/smiapp/smiapp-limits.c b/drivers/media/i2c/smiapp/smiapp-limits.c similarity index 99% rename from drivers/media/video/smiapp/smiapp-limits.c rename to drivers/media/i2c/smiapp/smiapp-limits.c index 0800e095724e2d4058ba5754880c066a35cda0d8..fb2f81ad8c3b39f56d7507e740f5cd9dc9fd4da2 100644 --- a/drivers/media/video/smiapp/smiapp-limits.c +++ b/drivers/media/i2c/smiapp/smiapp-limits.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/smiapp/smiapp-limits.c + * drivers/media/i2c/smiapp/smiapp-limits.c * * Generic driver for SMIA/SMIA++ compliant camera modules * diff --git a/drivers/media/video/smiapp/smiapp-limits.h b/drivers/media/i2c/smiapp/smiapp-limits.h similarity index 99% rename from drivers/media/video/smiapp/smiapp-limits.h rename to drivers/media/i2c/smiapp/smiapp-limits.h index 7f4836bb78db97754c0de9b5a2bde3da5f68a694..9ae765e23ea53b20ca3176ce1070205821a4b1f0 100644 --- a/drivers/media/video/smiapp/smiapp-limits.h +++ b/drivers/media/i2c/smiapp/smiapp-limits.h @@ -1,5 +1,5 @@ /* - * drivers/media/video/smiapp/smiapp-limits.h + * drivers/media/i2c/smiapp/smiapp-limits.h * * Generic driver for SMIA/SMIA++ compliant camera modules * diff --git a/drivers/media/video/smiapp/smiapp-quirk.c b/drivers/media/i2c/smiapp/smiapp-quirk.c similarity index 94% rename from drivers/media/video/smiapp/smiapp-quirk.c rename to drivers/media/i2c/smiapp/smiapp-quirk.c index 55e87950dcea5ca23d9c482f3f3c93a3ffaf3ed9..725cf62836c632f4bbf2c536b97f6d0384497cf4 100644 --- a/drivers/media/video/smiapp/smiapp-quirk.c +++ b/drivers/media/i2c/smiapp/smiapp-quirk.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/smiapp/smiapp-quirk.c + * drivers/media/i2c/smiapp/smiapp-quirk.c * * Generic driver for SMIA/SMIA++ compliant camera modules * @@ -61,26 +61,6 @@ void smiapp_replace_limit(struct smiapp_sensor *sensor, sensor->limits[limit] = val; } -int smiapp_replace_limit_at(struct smiapp_sensor *sensor, - u32 reg, u32 val) -{ - struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); - int i; - - for (i = 0; smiapp_reg_limits[i].addr; i++) { - if ((smiapp_reg_limits[i].addr & 0xffff) != reg) - continue; - - smiapp_replace_limit(sensor, i, val); - - return 0; - } - - dev_dbg(&client->dev, "quirk: bad register 0x%4.4x\n", reg); - - return -EINVAL; -} - bool smiapp_quirk_reg(struct smiapp_sensor *sensor, u32 reg, u32 *val) { diff --git a/drivers/media/video/smiapp/smiapp-quirk.h b/drivers/media/i2c/smiapp/smiapp-quirk.h similarity index 98% rename from drivers/media/video/smiapp/smiapp-quirk.h rename to drivers/media/i2c/smiapp/smiapp-quirk.h index f4dcaabaefe7066f99cd8d10ed22c5f4bfb62625..86fd3e8bfb0fe0e3e78a116ad93100b6c4ff0013 100644 --- a/drivers/media/video/smiapp/smiapp-quirk.h +++ b/drivers/media/i2c/smiapp/smiapp-quirk.h @@ -1,5 +1,5 @@ /* - * drivers/media/video/smiapp/smiapp-quirk.h + * drivers/media/i2c/smiapp/smiapp-quirk.h * * Generic driver for SMIA/SMIA++ compliant camera modules * diff --git a/drivers/media/video/smiapp/smiapp-reg-defs.h b/drivers/media/i2c/smiapp/smiapp-reg-defs.h similarity index 99% rename from drivers/media/video/smiapp/smiapp-reg-defs.h rename to drivers/media/i2c/smiapp/smiapp-reg-defs.h index a089eb8161e1e3c16f9c5df53602afe6ad8b632f..defa7c5adebf0e07fbd51d4f5d4963baf87d52e0 100644 --- a/drivers/media/video/smiapp/smiapp-reg-defs.h +++ b/drivers/media/i2c/smiapp/smiapp-reg-defs.h @@ -1,5 +1,5 @@ /* - * drivers/media/video/smiapp/smiapp-reg-defs.h + * drivers/media/i2c/smiapp/smiapp-reg-defs.h * * Generic driver for SMIA/SMIA++ compliant camera modules * diff --git a/drivers/media/video/smiapp/smiapp-reg.h b/drivers/media/i2c/smiapp/smiapp-reg.h similarity index 98% rename from drivers/media/video/smiapp/smiapp-reg.h rename to drivers/media/i2c/smiapp/smiapp-reg.h index d0167aa17534b84d2f94d7455de2dfd336115e62..54568ca2fe6d987c79c477c4262988ff6dcfbf4d 100644 --- a/drivers/media/video/smiapp/smiapp-reg.h +++ b/drivers/media/i2c/smiapp/smiapp-reg.h @@ -1,5 +1,5 @@ /* - * drivers/media/video/smiapp/smiapp-reg.h + * drivers/media/i2c/smiapp/smiapp-reg.h * * Generic driver for SMIA/SMIA++ compliant camera modules * diff --git a/drivers/media/video/smiapp/smiapp-regs.c b/drivers/media/i2c/smiapp/smiapp-regs.c similarity index 99% rename from drivers/media/video/smiapp/smiapp-regs.c rename to drivers/media/i2c/smiapp/smiapp-regs.c index b1812b17a4075150365a5ff7c6c1cd6b8512b69a..70e0d8db01301d56388ab452c318db728151e35b 100644 --- a/drivers/media/video/smiapp/smiapp-regs.c +++ b/drivers/media/i2c/smiapp/smiapp-regs.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/smiapp/smiapp-regs.c + * drivers/media/i2c/smiapp/smiapp-regs.c * * Generic driver for SMIA/SMIA++ compliant camera modules * diff --git a/drivers/media/video/smiapp/smiapp-regs.h b/drivers/media/i2c/smiapp/smiapp-regs.h similarity index 100% rename from drivers/media/video/smiapp/smiapp-regs.h rename to drivers/media/i2c/smiapp/smiapp-regs.h diff --git a/drivers/media/video/smiapp/smiapp.h b/drivers/media/i2c/smiapp/smiapp.h similarity index 99% rename from drivers/media/video/smiapp/smiapp.h rename to drivers/media/i2c/smiapp/smiapp.h index 587f7f11238d7125f96abc989fa24aed183b099b..4182a695ab53913e540cf230f2a5abdb0b810a38 100644 --- a/drivers/media/video/smiapp/smiapp.h +++ b/drivers/media/i2c/smiapp/smiapp.h @@ -1,5 +1,5 @@ /* - * drivers/media/video/smiapp/smiapp.h + * drivers/media/i2c/smiapp/smiapp.h * * Generic driver for SMIA/SMIA++ compliant camera modules * diff --git a/drivers/media/i2c/soc_camera/Kconfig b/drivers/media/i2c/soc_camera/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..6dff2b7ad520f2508101878802f3a8407c8a3079 --- /dev/null +++ b/drivers/media/i2c/soc_camera/Kconfig @@ -0,0 +1,89 @@ +comment "soc_camera sensor drivers" + +config SOC_CAMERA_IMX074 + tristate "imx074 support" + depends on SOC_CAMERA && I2C + help + This driver supports IMX074 cameras from Sony + +config SOC_CAMERA_MT9M001 + tristate "mt9m001 support" + depends on SOC_CAMERA && I2C + select GPIO_PCA953X if MT9M001_PCA9536_SWITCH + help + This driver supports MT9M001 cameras from Micron, monochrome + and colour models. + +config SOC_CAMERA_MT9M111 + tristate "mt9m111, mt9m112 and mt9m131 support" + depends on SOC_CAMERA && I2C + help + This driver supports MT9M111, MT9M112 and MT9M131 cameras from + Micron/Aptina + +config SOC_CAMERA_MT9T031 + tristate "mt9t031 support" + depends on SOC_CAMERA && I2C + help + This driver supports MT9T031 cameras from Micron. + +config SOC_CAMERA_MT9T112 + tristate "mt9t112 support" + depends on SOC_CAMERA && I2C + help + This driver supports MT9T112 cameras from Aptina. + +config SOC_CAMERA_MT9V022 + tristate "mt9v022 and mt9v024 support" + depends on SOC_CAMERA && I2C + select GPIO_PCA953X if MT9V022_PCA9536_SWITCH + help + This driver supports MT9V022 cameras from Micron + +config SOC_CAMERA_OV2640 + tristate "ov2640 camera support" + depends on SOC_CAMERA && I2C + help + This is a ov2640 camera driver + +config SOC_CAMERA_OV5642 + tristate "ov5642 camera support" + depends on SOC_CAMERA && I2C + help + This is a V4L2 camera driver for the OmniVision OV5642 sensor + +config SOC_CAMERA_OV6650 + tristate "ov6650 sensor support" + depends on SOC_CAMERA && I2C + ---help--- + This is a V4L2 SoC camera driver for the OmniVision OV6650 sensor + +config SOC_CAMERA_OV772X + tristate "ov772x camera support" + depends on SOC_CAMERA && I2C + help + This is a ov772x camera driver + +config SOC_CAMERA_OV9640 + tristate "ov9640 camera support" + depends on SOC_CAMERA && I2C + help + This is a ov9640 camera driver + +config SOC_CAMERA_OV9740 + tristate "ov9740 camera support" + depends on SOC_CAMERA && I2C + help + This is a ov9740 camera driver + +config SOC_CAMERA_RJ54N1 + tristate "rj54n1cb0c support" + depends on SOC_CAMERA && I2C + help + This is a rj54n1cb0c video driver + +config SOC_CAMERA_TW9910 + tristate "tw9910 support" + depends on SOC_CAMERA && I2C + help + This is a tw9910 video driver diff --git a/drivers/media/i2c/soc_camera/Makefile b/drivers/media/i2c/soc_camera/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..d0421feaa796115be0987dcad61f32b19312532f --- /dev/null +++ b/drivers/media/i2c/soc_camera/Makefile @@ -0,0 +1,14 @@ +obj-$(CONFIG_SOC_CAMERA_IMX074) += imx074.o +obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o +obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o +obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o +obj-$(CONFIG_SOC_CAMERA_MT9T112) += mt9t112.o +obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o +obj-$(CONFIG_SOC_CAMERA_OV2640) += ov2640.o +obj-$(CONFIG_SOC_CAMERA_OV5642) += ov5642.o +obj-$(CONFIG_SOC_CAMERA_OV6650) += ov6650.o +obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o +obj-$(CONFIG_SOC_CAMERA_OV9640) += ov9640.o +obj-$(CONFIG_SOC_CAMERA_OV9740) += ov9740.o +obj-$(CONFIG_SOC_CAMERA_RJ54N1) += rj54n1cb0c.o +obj-$(CONFIG_SOC_CAMERA_TW9910) += tw9910.o diff --git a/drivers/media/video/imx074.c b/drivers/media/i2c/soc_camera/imx074.c similarity index 95% rename from drivers/media/video/imx074.c rename to drivers/media/i2c/soc_camera/imx074.c index 351e9bafe8fe815daa8a5f6f6479adac65cb7581..f8534eec9de94a58f1de1497b6b4460239a92845 100644 --- a/drivers/media/video/imx074.c +++ b/drivers/media/i2c/soc_camera/imx074.c @@ -268,6 +268,14 @@ static int imx074_g_chip_ident(struct v4l2_subdev *sd, return 0; } +static int imx074_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + return soc_camera_set_power(&client->dev, icl, on); +} + static int imx074_g_mbus_config(struct v4l2_subdev *sd, struct v4l2_mbus_config *cfg) { @@ -292,6 +300,7 @@ static struct v4l2_subdev_video_ops imx074_subdev_video_ops = { static struct v4l2_subdev_core_ops imx074_subdev_core_ops = { .g_chip_ident = imx074_g_chip_ident, + .s_power = imx074_s_power, }; static struct v4l2_subdev_ops imx074_subdev_ops = { @@ -301,26 +310,33 @@ static struct v4l2_subdev_ops imx074_subdev_ops = { static int imx074_video_probe(struct i2c_client *client) { + struct v4l2_subdev *subdev = i2c_get_clientdata(client); int ret; u16 id; + ret = imx074_s_power(subdev, 1); + if (ret < 0) + return ret; + /* Read sensor Model ID */ ret = reg_read(client, 0); if (ret < 0) - return ret; + goto done; id = ret << 8; ret = reg_read(client, 1); if (ret < 0) - return ret; + goto done; id |= ret; dev_info(&client->dev, "Chip ID 0x%04x detected\n", id); - if (id != 0x74) - return -ENODEV; + if (id != 0x74) { + ret = -ENODEV; + goto done; + } /* PLL Setting EXTCLK=24MHz, 22.5times */ reg_write(client, PLL_MULTIPLIER, 0x2D); @@ -402,7 +418,11 @@ static int imx074_video_probe(struct i2c_client *client) reg_write(client, GROUPED_PARAMETER_HOLD, 0x00); /* off */ - return 0; + ret = 0; + +done: + imx074_s_power(subdev, 0); + return ret; } static int imx074_probe(struct i2c_client *client, diff --git a/drivers/media/video/mt9m001.c b/drivers/media/i2c/soc_camera/mt9m001.c similarity index 97% rename from drivers/media/video/mt9m001.c rename to drivers/media/i2c/soc_camera/mt9m001.c index 00583f5fd26bbc26c6dcd9861ff4fcf774118597..19f8a07764f97cf3b5e56b3c083c463b31cb99ed 100644 --- a/drivers/media/video/mt9m001.c +++ b/drivers/media/i2c/soc_camera/mt9m001.c @@ -171,7 +171,7 @@ static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable) return 0; } -static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +static int mt9m001_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9m001 *mt9m001 = to_mt9m001(client); @@ -377,6 +377,14 @@ static int mt9m001_s_register(struct v4l2_subdev *sd, } #endif +static int mt9m001_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + return soc_camera_set_power(&client->dev, icl, on); +} + static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl) { struct mt9m001 *mt9m001 = container_of(ctrl->handler, @@ -482,6 +490,10 @@ static int mt9m001_video_probe(struct soc_camera_link *icl, unsigned long flags; int ret; + ret = mt9m001_s_power(&mt9m001->subdev, 1); + if (ret < 0) + return ret; + /* Enable the chip */ data = reg_write(client, MT9M001_CHIP_ENABLE, 1); dev_dbg(&client->dev, "write: %d\n", data); @@ -503,7 +515,8 @@ static int mt9m001_video_probe(struct soc_camera_link *icl, default: dev_err(&client->dev, "No MT9M001 chip detected, register read %x\n", data); - return -ENODEV; + ret = -ENODEV; + goto done; } mt9m001->num_fmts = 0; @@ -532,11 +545,17 @@ static int mt9m001_video_probe(struct soc_camera_link *icl, data == 0x8431 ? "C12STM" : "C12ST"); ret = mt9m001_init(client); - if (ret < 0) + if (ret < 0) { dev_err(&client->dev, "Failed to initialise the camera\n"); + goto done; + } /* mt9m001_init() has reset the chip, returning registers to defaults */ - return v4l2_ctrl_handler_setup(&mt9m001->hdl); + ret = v4l2_ctrl_handler_setup(&mt9m001->hdl); + +done: + mt9m001_s_power(&mt9m001->subdev, 0); + return ret; } static void mt9m001_video_remove(struct soc_camera_link *icl) @@ -566,6 +585,7 @@ static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = { .g_register = mt9m001_g_register, .s_register = mt9m001_s_register, #endif + .s_power = mt9m001_s_power, }; static int mt9m001_enum_fmt(struct v4l2_subdev *sd, unsigned int index, diff --git a/drivers/media/video/mt9m111.c b/drivers/media/i2c/soc_camera/mt9m111.c similarity index 95% rename from drivers/media/video/mt9m111.c rename to drivers/media/i2c/soc_camera/mt9m111.c index 863d722dda06ebf25440c0f2fbb491c7eb3d2ce9..62fd94af599be4010e72ccde0bf6fa61f7794a5f 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/i2c/soc_camera/mt9m111.c @@ -383,7 +383,7 @@ static int mt9m111_reset(struct mt9m111 *mt9m111) return ret; } -static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +static int mt9m111_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) { struct v4l2_rect rect = a->c; struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); @@ -796,45 +796,37 @@ static int mt9m111_init(struct mt9m111 *mt9m111) return ret; } -/* - * Interface active, can use i2c. If it fails, it can indeed mean, that - * this wasn't our capture interface, so, we wait for the right one - */ -static int mt9m111_video_probe(struct i2c_client *client) +static int mt9m111_power_on(struct mt9m111 *mt9m111) { - struct mt9m111 *mt9m111 = to_mt9m111(client); - s32 data; + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); int ret; - data = reg_read(CHIP_VERSION); + ret = soc_camera_power_on(&client->dev, icl); + if (ret < 0) + return ret; - switch (data) { - case 0x143a: /* MT9M111 or MT9M131 */ - mt9m111->model = V4L2_IDENT_MT9M111; - dev_info(&client->dev, - "Detected a MT9M111/MT9M131 chip ID %x\n", data); - break; - case 0x148c: /* MT9M112 */ - mt9m111->model = V4L2_IDENT_MT9M112; - dev_info(&client->dev, "Detected a MT9M112 chip ID %x\n", data); - break; - default: - dev_err(&client->dev, - "No MT9M111/MT9M112/MT9M131 chip detected register read %x\n", - data); - return -ENODEV; + ret = mt9m111_resume(mt9m111); + if (ret < 0) { + dev_err(&client->dev, "Failed to resume the sensor: %d\n", ret); + soc_camera_power_off(&client->dev, icl); } - ret = mt9m111_init(mt9m111); - if (ret) - return ret; - return v4l2_ctrl_handler_setup(&mt9m111->hdl); + return ret; +} + +static void mt9m111_power_off(struct mt9m111 *mt9m111) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + mt9m111_suspend(mt9m111); + soc_camera_power_off(&client->dev, icl); } static int mt9m111_s_power(struct v4l2_subdev *sd, int on) { struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); - struct i2c_client *client = v4l2_get_subdevdata(sd); int ret = 0; mutex_lock(&mt9m111->power_lock); @@ -844,23 +836,18 @@ static int mt9m111_s_power(struct v4l2_subdev *sd, int on) * update the power state. */ if (mt9m111->power_count == !on) { - if (on) { - ret = mt9m111_resume(mt9m111); - if (ret) { - dev_err(&client->dev, - "Failed to resume the sensor: %d\n", ret); - goto out; - } - } else { - mt9m111_suspend(mt9m111); - } + if (on) + ret = mt9m111_power_on(mt9m111); + else + mt9m111_power_off(mt9m111); } - /* Update the power count. */ - mt9m111->power_count += on ? 1 : -1; - WARN_ON(mt9m111->power_count < 0); + if (!ret) { + /* Update the power count. */ + mt9m111->power_count += on ? 1 : -1; + WARN_ON(mt9m111->power_count < 0); + } -out: mutex_unlock(&mt9m111->power_lock); return ret; } @@ -919,6 +906,51 @@ static struct v4l2_subdev_ops mt9m111_subdev_ops = { .video = &mt9m111_subdev_video_ops, }; +/* + * Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one + */ +static int mt9m111_video_probe(struct i2c_client *client) +{ + struct mt9m111 *mt9m111 = to_mt9m111(client); + s32 data; + int ret; + + ret = mt9m111_s_power(&mt9m111->subdev, 1); + if (ret < 0) + return ret; + + data = reg_read(CHIP_VERSION); + + switch (data) { + case 0x143a: /* MT9M111 or MT9M131 */ + mt9m111->model = V4L2_IDENT_MT9M111; + dev_info(&client->dev, + "Detected a MT9M111/MT9M131 chip ID %x\n", data); + break; + case 0x148c: /* MT9M112 */ + mt9m111->model = V4L2_IDENT_MT9M112; + dev_info(&client->dev, "Detected a MT9M112 chip ID %x\n", data); + break; + default: + dev_err(&client->dev, + "No MT9M111/MT9M112/MT9M131 chip detected register read %x\n", + data); + ret = -ENODEV; + goto done; + } + + ret = mt9m111_init(mt9m111); + if (ret) + goto done; + + ret = v4l2_ctrl_handler_setup(&mt9m111->hdl); + +done: + mt9m111_s_power(&mt9m111->subdev, 0); + return ret; +} + static int mt9m111_probe(struct i2c_client *client, const struct i2c_device_id *did) { diff --git a/drivers/media/video/mt9t031.c b/drivers/media/i2c/soc_camera/mt9t031.c similarity index 97% rename from drivers/media/video/mt9t031.c rename to drivers/media/i2c/soc_camera/mt9t031.c index 1415074138a5409b69a9236d7416f501442d521f..40800b10a0808240f889628026c64e17630de98c 100644 --- a/drivers/media/video/mt9t031.c +++ b/drivers/media/i2c/soc_camera/mt9t031.c @@ -161,14 +161,6 @@ static int mt9t031_idle(struct i2c_client *client) return ret >= 0 ? 0 : -EIO; } -static int mt9t031_disable(struct i2c_client *client) -{ - /* Disable the chip */ - reg_clear(client, MT9T031_OUTPUT_CONTROL, 2); - - return 0; -} - static int mt9t031_s_stream(struct v4l2_subdev *sd, int enable) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -302,7 +294,7 @@ static int mt9t031_set_params(struct i2c_client *client, return ret < 0 ? ret : 0; } -static int mt9t031_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +static int mt9t031_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) { struct v4l2_rect rect = a->c; struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -616,12 +608,19 @@ static struct device_type mt9t031_dev_type = { static int mt9t031_s_power(struct v4l2_subdev *sd, int on) { struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); struct video_device *vdev = soc_camera_i2c_to_vdev(client); + int ret; - if (on) + if (on) { + ret = soc_camera_power_on(&client->dev, icl); + if (ret < 0) + return ret; vdev->dev.type = &mt9t031_dev_type; - else + } else { vdev->dev.type = NULL; + soc_camera_power_off(&client->dev, icl); + } return 0; } @@ -636,9 +635,15 @@ static int mt9t031_video_probe(struct i2c_client *client) s32 data; int ret; - /* Enable the chip */ - data = reg_write(client, MT9T031_CHIP_ENABLE, 1); - dev_dbg(&client->dev, "write: %d\n", data); + ret = mt9t031_s_power(&mt9t031->subdev, 1); + if (ret < 0) + return ret; + + ret = mt9t031_idle(client); + if (ret < 0) { + dev_err(&client->dev, "Failed to initialise the camera\n"); + goto done; + } /* Read out the chip version register */ data = reg_read(client, MT9T031_CHIP_VERSION); @@ -650,16 +655,16 @@ static int mt9t031_video_probe(struct i2c_client *client) default: dev_err(&client->dev, "No MT9T031 chip detected, register read %x\n", data); - return -ENODEV; + ret = -ENODEV; + goto done; } dev_info(&client->dev, "Detected a MT9T031 chip ID %x\n", data); - ret = mt9t031_idle(client); - if (ret < 0) - dev_err(&client->dev, "Failed to initialise the camera\n"); - else - v4l2_ctrl_handler_setup(&mt9t031->hdl); + ret = v4l2_ctrl_handler_setup(&mt9t031->hdl); + +done: + mt9t031_s_power(&mt9t031->subdev, 0); return ret; } @@ -810,12 +815,7 @@ static int mt9t031_probe(struct i2c_client *client, mt9t031->xskip = 1; mt9t031->yskip = 1; - mt9t031_idle(client); - ret = mt9t031_video_probe(client); - - mt9t031_disable(client); - if (ret) { v4l2_ctrl_handler_free(&mt9t031->hdl); kfree(mt9t031); diff --git a/drivers/media/video/mt9t112.c b/drivers/media/i2c/soc_camera/mt9t112.c similarity index 98% rename from drivers/media/video/mt9t112.c rename to drivers/media/i2c/soc_camera/mt9t112.c index e1ae46a7ee96e81f9a4da20bf7c5dc2267c0585b..de7cd836b0a2c8e4fc95cdf821a49b52b103a774 100644 --- a/drivers/media/video/mt9t112.c +++ b/drivers/media/i2c/soc_camera/mt9t112.c @@ -776,12 +776,21 @@ static int mt9t112_s_register(struct v4l2_subdev *sd, } #endif +static int mt9t112_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + return soc_camera_set_power(&client->dev, icl, on); +} + static struct v4l2_subdev_core_ops mt9t112_subdev_core_ops = { .g_chip_ident = mt9t112_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = mt9t112_g_register, .s_register = mt9t112_s_register, #endif + .s_power = mt9t112_s_power, }; @@ -898,11 +907,11 @@ static int mt9t112_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) return 0; } -static int mt9t112_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +static int mt9t112_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9t112_priv *priv = to_mt9t112(client); - struct v4l2_rect *rect = &a->c; + const struct v4l2_rect *rect = &a->c; return mt9t112_set_params(priv, rect, priv->format->code); } @@ -1032,6 +1041,11 @@ static int mt9t112_camera_probe(struct i2c_client *client) struct mt9t112_priv *priv = to_mt9t112(client); const char *devname; int chipid; + int ret; + + ret = mt9t112_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; /* * check and show chip ID @@ -1049,12 +1063,15 @@ static int mt9t112_camera_probe(struct i2c_client *client) break; default: dev_err(&client->dev, "Product ID error %04x\n", chipid); - return -ENODEV; + ret = -ENODEV; + goto done; } dev_info(&client->dev, "%s chip ID %04x\n", devname, chipid); - return 0; +done: + mt9t112_s_power(&priv->subdev, 0); + return ret; } static int mt9t112_probe(struct i2c_client *client, diff --git a/drivers/media/video/mt9v022.c b/drivers/media/i2c/soc_camera/mt9v022.c similarity index 93% rename from drivers/media/video/mt9v022.c rename to drivers/media/i2c/soc_camera/mt9v022.c index 72479247522a8fe923235a88b342145ed0d39cf3..13057b966ee9abe10b7d4e29331ec80ba52fa20a 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/i2c/soc_camera/mt9v022.c @@ -57,6 +57,10 @@ MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\""); #define MT9V022_AEC_AGC_ENABLE 0xAF #define MT9V022_MAX_TOTAL_SHUTTER_WIDTH 0xBD +/* mt9v024 partial list register addresses changes with respect to mt9v022 */ +#define MT9V024_PIXCLK_FV_LV 0x72 +#define MT9V024_MAX_TOTAL_SHUTTER_WIDTH 0xAD + /* Progressive scan, master, defaults */ #define MT9V022_CHIP_CONTROL_DEFAULT 0x188 @@ -67,6 +71,8 @@ MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\""); #define MT9V022_COLUMN_SKIP 1 #define MT9V022_ROW_SKIP 4 +#define is_mt9v024(id) (id == 0x1324) + /* MT9V022 has only one fixed colorspace per pixelcode */ struct mt9v022_datafmt { enum v4l2_mbus_pixelcode code; @@ -101,6 +107,22 @@ static const struct mt9v022_datafmt mt9v022_monochrome_fmts[] = { {V4L2_MBUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG}, }; +/* only registers with different addresses on different mt9v02x sensors */ +struct mt9v02x_register { + u8 max_total_shutter_width; + u8 pixclk_fv_lv; +}; + +static const struct mt9v02x_register mt9v022_register = { + .max_total_shutter_width = MT9V022_MAX_TOTAL_SHUTTER_WIDTH, + .pixclk_fv_lv = MT9V022_PIXCLK_FV_LV, +}; + +static const struct mt9v02x_register mt9v024_register = { + .max_total_shutter_width = MT9V024_MAX_TOTAL_SHUTTER_WIDTH, + .pixclk_fv_lv = MT9V024_PIXCLK_FV_LV, +}; + struct mt9v022 { struct v4l2_subdev subdev; struct v4l2_ctrl_handler hdl; @@ -117,6 +139,7 @@ struct mt9v022 { struct v4l2_rect rect; /* Sensor window */ const struct mt9v022_datafmt *fmt; const struct mt9v022_datafmt *fmts; + const struct mt9v02x_register *reg; int num_fmts; int model; /* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */ u16 chip_control; @@ -185,7 +208,7 @@ static int mt9v022_init(struct i2c_client *client) if (!ret) ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, 480); if (!ret) - ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480); + ret = reg_write(client, mt9v022->reg->max_total_shutter_width, 480); if (!ret) /* default - auto */ ret = reg_clear(client, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1); @@ -214,7 +237,7 @@ static int mt9v022_s_stream(struct v4l2_subdev *sd, int enable) return 0; } -static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +static int mt9v022_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9v022 *mt9v022 = to_mt9v022(client); @@ -238,7 +261,7 @@ static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) ret = reg_read(client, MT9V022_AEC_AGC_ENABLE); if (ret >= 0) { if (ret & 1) /* Autoexposure */ - ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, + ret = reg_write(client, mt9v022->reg->max_total_shutter_width, rect.height + mt9v022->y_skip_top + 43); else ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, @@ -445,6 +468,14 @@ static int mt9v022_s_register(struct v4l2_subdev *sd, } #endif +static int mt9v022_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + return soc_camera_set_power(&client->dev, icl, on); +} + static int mt9v022_g_volatile_ctrl(struct v4l2_ctrl *ctrl) { struct mt9v022 *mt9v022 = container_of(ctrl->handler, @@ -570,17 +601,24 @@ static int mt9v022_video_probe(struct i2c_client *client) int ret; unsigned long flags; + ret = mt9v022_s_power(&mt9v022->subdev, 1); + if (ret < 0) + return ret; + /* Read out the chip version register */ data = reg_read(client, MT9V022_CHIP_VERSION); - /* must be 0x1311 or 0x1313 */ - if (data != 0x1311 && data != 0x1313) { + /* must be 0x1311, 0x1313 or 0x1324 */ + if (data != 0x1311 && data != 0x1313 && data != 0x1324) { ret = -ENODEV; dev_info(&client->dev, "No MT9V022 found, ID register 0x%x\n", data); goto ei2c; } + mt9v022->reg = is_mt9v024(data) ? &mt9v024_register : + &mt9v022_register; + /* Soft reset */ ret = reg_write(client, MT9V022_RESET, 1); if (ret < 0) @@ -640,6 +678,7 @@ static int mt9v022_video_probe(struct i2c_client *client) dev_err(&client->dev, "Failed to initialise the camera\n"); ei2c: + mt9v022_s_power(&mt9v022->subdev, 0); return ret; } @@ -664,6 +703,7 @@ static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = { .g_register = mt9v022_g_register, .s_register = mt9v022_s_register, #endif + .s_power = mt9v022_s_power, }; static int mt9v022_enum_fmt(struct v4l2_subdev *sd, unsigned int index, @@ -728,7 +768,7 @@ static int mt9v022_s_mbus_config(struct v4l2_subdev *sd, if (!(flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)) pixclk |= 0x2; - ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk); + ret = reg_write(client, mt9v022->reg->pixclk_fv_lv, pixclk); if (ret < 0) return ret; diff --git a/drivers/media/video/ov2640.c b/drivers/media/i2c/soc_camera/ov2640.c similarity index 98% rename from drivers/media/video/ov2640.c rename to drivers/media/i2c/soc_camera/ov2640.c index 7c44d1fe3c87a8224823e2357c297abfa5b43968..78ac5744cb5dd55ffda31edf6e7ead3e74fb1e0c 100644 --- a/drivers/media/video/ov2640.c +++ b/drivers/media/i2c/soc_camera/ov2640.c @@ -742,6 +742,14 @@ static int ov2640_s_register(struct v4l2_subdev *sd, } #endif +static int ov2640_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + return soc_camera_set_power(&client->dev, icl, on); +} + /* Select the nearest higher resolution for capture */ static const struct ov2640_win_size *ov2640_select_win(u32 *width, u32 *height) { @@ -947,6 +955,10 @@ static int ov2640_video_probe(struct i2c_client *client) const char *devname; int ret; + ret = ov2640_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; + /* * check and show product ID and manufacturer ID */ @@ -965,16 +977,17 @@ static int ov2640_video_probe(struct i2c_client *client) dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver); ret = -ENODEV; - goto err; + goto done; } dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n", devname, pid, ver, midh, midl); - return v4l2_ctrl_handler_setup(&priv->hdl); + ret = v4l2_ctrl_handler_setup(&priv->hdl); -err: +done: + ov2640_s_power(&priv->subdev, 0); return ret; } @@ -988,6 +1001,7 @@ static struct v4l2_subdev_core_ops ov2640_subdev_core_ops = { .g_register = ov2640_g_register, .s_register = ov2640_s_register, #endif + .s_power = ov2640_s_power, }; static int ov2640_g_mbus_config(struct v4l2_subdev *sd, diff --git a/drivers/media/video/ov5642.c b/drivers/media/i2c/soc_camera/ov5642.c similarity index 96% rename from drivers/media/video/ov5642.c rename to drivers/media/i2c/soc_camera/ov5642.c index 0bc93313d37ad1036da74be56a655dd9bbe880ae..8577e0cfb7fed34c70440f1df25a7c4fbfda1c53 100644 --- a/drivers/media/video/ov5642.c +++ b/drivers/media/i2c/soc_camera/ov5642.c @@ -865,24 +865,24 @@ static int ov5642_g_chip_ident(struct v4l2_subdev *sd, return 0; } -static int ov5642_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +static int ov5642_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct ov5642 *priv = to_ov5642(client); - struct v4l2_rect *rect = &a->c; + struct v4l2_rect rect = a->c; int ret; - v4l_bound_align_image(&rect->width, 48, OV5642_MAX_WIDTH, 1, - &rect->height, 32, OV5642_MAX_HEIGHT, 1, 0); + v4l_bound_align_image(&rect.width, 48, OV5642_MAX_WIDTH, 1, + &rect.height, 32, OV5642_MAX_HEIGHT, 1, 0); - priv->crop_rect.width = rect->width; - priv->crop_rect.height = rect->height; - priv->total_width = rect->width + BLANKING_EXTRA_WIDTH; - priv->total_height = max_t(int, rect->height + + priv->crop_rect.width = rect.width; + priv->crop_rect.height = rect.height; + priv->total_width = rect.width + BLANKING_EXTRA_WIDTH; + priv->total_height = max_t(int, rect.height + BLANKING_EXTRA_HEIGHT, BLANKING_MIN_HEIGHT); - priv->crop_rect.width = rect->width; - priv->crop_rect.height = rect->height; + priv->crop_rect.width = rect.width; + priv->crop_rect.height = rect.height; ret = ov5642_write_array(client, ov5642_default_regs_init); if (!ret) @@ -933,13 +933,17 @@ static int ov5642_g_mbus_config(struct v4l2_subdev *sd, static int ov5642_s_power(struct v4l2_subdev *sd, int on) { - struct i2c_client *client; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); int ret; if (!on) - return 0; + return soc_camera_power_off(&client->dev, icl); + + ret = soc_camera_power_on(&client->dev, icl); + if (ret < 0) + return ret; - client = v4l2_get_subdevdata(sd); ret = ov5642_write_array(client, ov5642_default_regs_init); if (!ret) ret = ov5642_set_resolution(sd); @@ -976,29 +980,40 @@ static struct v4l2_subdev_ops ov5642_subdev_ops = { static int ov5642_video_probe(struct i2c_client *client) { + struct v4l2_subdev *subdev = i2c_get_clientdata(client); int ret; u8 id_high, id_low; u16 id; + ret = ov5642_s_power(subdev, 1); + if (ret < 0) + return ret; + /* Read sensor Model ID */ ret = reg_read(client, REG_CHIP_ID_HIGH, &id_high); if (ret < 0) - return ret; + goto done; id = id_high << 8; ret = reg_read(client, REG_CHIP_ID_LOW, &id_low); if (ret < 0) - return ret; + goto done; id |= id_low; dev_info(&client->dev, "Chip ID 0x%04x detected\n", id); - if (id != 0x5642) - return -ENODEV; + if (id != 0x5642) { + ret = -ENODEV; + goto done; + } - return 0; + ret = 0; + +done: + ov5642_s_power(subdev, 0); + return ret; } static int ov5642_probe(struct i2c_client *client, diff --git a/drivers/media/video/ov6650.c b/drivers/media/i2c/soc_camera/ov6650.c similarity index 95% rename from drivers/media/video/ov6650.c rename to drivers/media/i2c/soc_camera/ov6650.c index 3e028b1970dd4124412b6b844f07bf0d61222637..e87feb0881e391023e8a0143188207e234bdab2d 100644 --- a/drivers/media/video/ov6650.c +++ b/drivers/media/i2c/soc_camera/ov6650.c @@ -432,6 +432,14 @@ static int ov6650_set_register(struct v4l2_subdev *sd, } #endif +static int ov6650_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + return soc_camera_set_power(&client->dev, icl, on); +} + static int ov6650_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -443,42 +451,42 @@ static int ov6650_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) return 0; } -static int ov6650_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +static int ov6650_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct ov6650 *priv = to_ov6650(client); - struct v4l2_rect *rect = &a->c; + struct v4l2_rect rect = a->c; int ret; if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - rect->left = ALIGN(rect->left, 2); - rect->width = ALIGN(rect->width, 2); - rect->top = ALIGN(rect->top, 2); - rect->height = ALIGN(rect->height, 2); - soc_camera_limit_side(&rect->left, &rect->width, + rect.left = ALIGN(rect.left, 2); + rect.width = ALIGN(rect.width, 2); + rect.top = ALIGN(rect.top, 2); + rect.height = ALIGN(rect.height, 2); + soc_camera_limit_side(&rect.left, &rect.width, DEF_HSTRT << 1, 2, W_CIF); - soc_camera_limit_side(&rect->top, &rect->height, + soc_camera_limit_side(&rect.top, &rect.height, DEF_VSTRT << 1, 2, H_CIF); - ret = ov6650_reg_write(client, REG_HSTRT, rect->left >> 1); + ret = ov6650_reg_write(client, REG_HSTRT, rect.left >> 1); if (!ret) { - priv->rect.left = rect->left; + priv->rect.left = rect.left; ret = ov6650_reg_write(client, REG_HSTOP, - (rect->left + rect->width) >> 1); + (rect.left + rect.width) >> 1); } if (!ret) { - priv->rect.width = rect->width; - ret = ov6650_reg_write(client, REG_VSTRT, rect->top >> 1); + priv->rect.width = rect.width; + ret = ov6650_reg_write(client, REG_VSTRT, rect.top >> 1); } if (!ret) { - priv->rect.top = rect->top; + priv->rect.top = rect.top; ret = ov6650_reg_write(client, REG_VSTOP, - (rect->top + rect->height) >> 1); + (rect.top + rect.height) >> 1); } if (!ret) - priv->rect.height = rect->height; + priv->rect.height = rect.height; return ret; } @@ -821,8 +829,13 @@ static int ov6650_prog_dflt(struct i2c_client *client) static int ov6650_video_probe(struct i2c_client *client) { + struct ov6650 *priv = to_ov6650(client); u8 pidh, pidl, midh, midl; - int ret = 0; + int ret; + + ret = ov6650_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; /* * check and show product ID and manufacturer ID @@ -836,12 +849,13 @@ static int ov6650_video_probe(struct i2c_client *client) ret = ov6650_reg_read(client, REG_MIDL, &midl); if (ret) - return ret; + goto done; if ((pidh != OV6650_PIDH) || (pidl != OV6650_PIDL)) { dev_err(&client->dev, "Product ID error 0x%02x:0x%02x\n", pidh, pidl); - return -ENODEV; + ret = -ENODEV; + goto done; } dev_info(&client->dev, @@ -851,7 +865,11 @@ static int ov6650_video_probe(struct i2c_client *client) ret = ov6650_reset(client); if (!ret) ret = ov6650_prog_dflt(client); + if (!ret) + ret = v4l2_ctrl_handler_setup(&priv->hdl); +done: + ov6650_s_power(&priv->subdev, 0); return ret; } @@ -866,6 +884,7 @@ static struct v4l2_subdev_core_ops ov6650_core_ops = { .g_register = ov6650_get_register, .s_register = ov6650_set_register, #endif + .s_power = ov6650_s_power, }; /* Request bus settings on camera side */ @@ -1010,9 +1029,6 @@ static int ov6650_probe(struct i2c_client *client, priv->colorspace = V4L2_COLORSPACE_JPEG; ret = ov6650_video_probe(client); - if (!ret) - ret = v4l2_ctrl_handler_setup(&priv->hdl); - if (ret) { v4l2_ctrl_handler_free(&priv->hdl); kfree(priv); diff --git a/drivers/media/video/ov772x.c b/drivers/media/i2c/soc_camera/ov772x.c similarity index 81% rename from drivers/media/video/ov772x.c rename to drivers/media/i2c/soc_camera/ov772x.c index 6d79b89b860340dddaf2ae0c1f64f3d121ee1f2d..e4a10751894dc477c3de6010323882ed7020f2c4 100644 --- a/drivers/media/video/ov772x.c +++ b/drivers/media/i2c/soc_camera/ov772x.c @@ -16,6 +16,7 @@ */ #include +#include #include #include #include @@ -274,6 +275,7 @@ #define SLCT_VGA 0x00 /* 0 : VGA */ #define SLCT_QVGA 0x40 /* 1 : QVGA */ #define ITU656_ON_OFF 0x20 /* ITU656 protocol ON/OFF selection */ +#define SENSOR_RAW 0x10 /* Sensor RAW */ /* RGB output format control */ #define FMT_MASK 0x0c /* Mask of color format */ #define FMT_GBR422 0x00 /* 00 : GBR 4:2:2 */ @@ -316,8 +318,15 @@ #define SGLF_ON_OFF 0x02 /* Single frame ON/OFF selection */ #define SGLF_TRIG 0x01 /* Single frame transfer trigger */ +/* HREF */ +#define HREF_VSTART_SHIFT 6 /* VSTART LSB */ +#define HREF_HSTART_SHIFT 4 /* HSTART 2 LSBs */ +#define HREF_VSIZE_SHIFT 2 /* VSIZE LSB */ +#define HREF_HSIZE_SHIFT 0 /* HSIZE 2 LSBs */ + /* EXHCH */ -#define VSIZE_LSB 0x04 /* Vertical data output size LSB */ +#define EXHCH_VSIZE_SHIFT 2 /* VOUTSIZE LSB */ +#define EXHCH_HSIZE_SHIFT 0 /* HOUTSIZE 2 LSBs */ /* DSP_CTRL1 */ #define FIFO_ON 0x80 /* FIFO enable/disable selection */ @@ -337,29 +346,11 @@ #define CBAR_ON 0x20 /* ON */ #define CBAR_OFF 0x00 /* OFF */ -/* HSTART */ -#define HST_VGA 0x23 -#define HST_QVGA 0x3F - -/* HSIZE */ -#define HSZ_VGA 0xA0 -#define HSZ_QVGA 0x50 - -/* VSTART */ -#define VST_VGA 0x07 -#define VST_QVGA 0x03 - -/* VSIZE */ -#define VSZ_VGA 0xF0 -#define VSZ_QVGA 0x78 - -/* HOUTSIZE */ -#define HOSZ_VGA 0xA0 -#define HOSZ_QVGA 0x50 - -/* VOUTSIZE */ -#define VOSZ_VGA 0xF0 -#define VOSZ_QVGA 0x78 +/* DSP_CTRL4 */ +#define DSP_OFMT_YUV 0x00 +#define DSP_OFMT_RGB 0x00 +#define DSP_OFMT_RAW8 0x02 +#define DSP_OFMT_RAW10 0x03 /* DSPAUTO (DSP Auto Function ON/OFF Control) */ #define AWB_ACTRL 0x80 /* AWB auto threshold control */ @@ -369,6 +360,13 @@ #define SCAL0_ACTRL 0x08 /* Auto scaling factor control */ #define SCAL1_2_ACTRL 0x04 /* Auto scaling factor control */ +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 +#define QVGA_WIDTH 320 +#define QVGA_HEIGHT 240 +#define OV772X_MAX_WIDTH VGA_WIDTH +#define OV772X_MAX_HEIGHT VGA_HEIGHT + /* * ID */ @@ -379,25 +377,20 @@ /* * struct */ -struct regval_list { - unsigned char reg_num; - unsigned char value; -}; struct ov772x_color_format { enum v4l2_mbus_pixelcode code; enum v4l2_colorspace colorspace; u8 dsp3; + u8 dsp4; u8 com3; u8 com7; }; struct ov772x_win_size { char *name; - __u32 width; - __u32 height; unsigned char com7_bit; - const struct regval_list *regs; + struct v4l2_rect rect; }; struct ov772x_priv { @@ -413,31 +406,6 @@ struct ov772x_priv { unsigned short band_filter; }; -#define ENDMARKER { 0xff, 0xff } - -/* - * register setting for window size - */ -static const struct regval_list ov772x_qvga_regs[] = { - { HSTART, HST_QVGA }, - { HSIZE, HSZ_QVGA }, - { VSTART, VST_QVGA }, - { VSIZE, VSZ_QVGA }, - { HOUTSIZE, HOSZ_QVGA }, - { VOUTSIZE, VOSZ_QVGA }, - ENDMARKER, -}; - -static const struct regval_list ov772x_vga_regs[] = { - { HSTART, HST_VGA }, - { HSIZE, HSZ_VGA }, - { VSTART, VST_VGA }, - { VSIZE, VSZ_VGA }, - { HOUTSIZE, HOSZ_VGA }, - { VOUTSIZE, VOSZ_VGA }, - ENDMARKER, -}; - /* * supported color format list */ @@ -446,6 +414,7 @@ static const struct ov772x_color_format ov772x_cfmts[] = { .code = V4L2_MBUS_FMT_YUYV8_2X8, .colorspace = V4L2_COLORSPACE_JPEG, .dsp3 = 0x0, + .dsp4 = DSP_OFMT_YUV, .com3 = SWAP_YUV, .com7 = OFMT_YUV, }, @@ -453,6 +422,7 @@ static const struct ov772x_color_format ov772x_cfmts[] = { .code = V4L2_MBUS_FMT_YVYU8_2X8, .colorspace = V4L2_COLORSPACE_JPEG, .dsp3 = UV_ON, + .dsp4 = DSP_OFMT_YUV, .com3 = SWAP_YUV, .com7 = OFMT_YUV, }, @@ -460,6 +430,7 @@ static const struct ov772x_color_format ov772x_cfmts[] = { .code = V4L2_MBUS_FMT_UYVY8_2X8, .colorspace = V4L2_COLORSPACE_JPEG, .dsp3 = 0x0, + .dsp4 = DSP_OFMT_YUV, .com3 = 0x0, .com7 = OFMT_YUV, }, @@ -467,6 +438,7 @@ static const struct ov772x_color_format ov772x_cfmts[] = { .code = V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, .colorspace = V4L2_COLORSPACE_SRGB, .dsp3 = 0x0, + .dsp4 = DSP_OFMT_YUV, .com3 = SWAP_RGB, .com7 = FMT_RGB555 | OFMT_RGB, }, @@ -474,6 +446,7 @@ static const struct ov772x_color_format ov772x_cfmts[] = { .code = V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE, .colorspace = V4L2_COLORSPACE_SRGB, .dsp3 = 0x0, + .dsp4 = DSP_OFMT_YUV, .com3 = 0x0, .com7 = FMT_RGB555 | OFMT_RGB, }, @@ -481,6 +454,7 @@ static const struct ov772x_color_format ov772x_cfmts[] = { .code = V4L2_MBUS_FMT_RGB565_2X8_LE, .colorspace = V4L2_COLORSPACE_SRGB, .dsp3 = 0x0, + .dsp4 = DSP_OFMT_YUV, .com3 = SWAP_RGB, .com7 = FMT_RGB565 | OFMT_RGB, }, @@ -488,82 +462,94 @@ static const struct ov772x_color_format ov772x_cfmts[] = { .code = V4L2_MBUS_FMT_RGB565_2X8_BE, .colorspace = V4L2_COLORSPACE_SRGB, .dsp3 = 0x0, + .dsp4 = DSP_OFMT_YUV, .com3 = 0x0, .com7 = FMT_RGB565 | OFMT_RGB, }, + { + /* Setting DSP4 to DSP_OFMT_RAW8 still gives 10-bit output, + * regardless of the COM7 value. We can thus only support 10-bit + * Bayer until someone figures it out. + */ + .code = V4L2_MBUS_FMT_SBGGR10_1X10, + .colorspace = V4L2_COLORSPACE_SRGB, + .dsp3 = 0x0, + .dsp4 = DSP_OFMT_RAW10, + .com3 = 0x0, + .com7 = SENSOR_RAW | OFMT_BRAW, + }, }; /* * window size list */ -#define VGA_WIDTH 640 -#define VGA_HEIGHT 480 -#define QVGA_WIDTH 320 -#define QVGA_HEIGHT 240 -#define MAX_WIDTH VGA_WIDTH -#define MAX_HEIGHT VGA_HEIGHT - -static const struct ov772x_win_size ov772x_win_vga = { - .name = "VGA", - .width = VGA_WIDTH, - .height = VGA_HEIGHT, - .com7_bit = SLCT_VGA, - .regs = ov772x_vga_regs, -}; -static const struct ov772x_win_size ov772x_win_qvga = { - .name = "QVGA", - .width = QVGA_WIDTH, - .height = QVGA_HEIGHT, - .com7_bit = SLCT_QVGA, - .regs = ov772x_qvga_regs, +static const struct ov772x_win_size ov772x_win_sizes[] = { + { + .name = "VGA", + .com7_bit = SLCT_VGA, + .rect = { + .left = 140, + .top = 14, + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + }, + }, { + .name = "QVGA", + .com7_bit = SLCT_QVGA, + .rect = { + .left = 252, + .top = 6, + .width = QVGA_WIDTH, + .height = QVGA_HEIGHT, + }, + }, }; /* * general function */ -static struct ov772x_priv *to_ov772x(const struct i2c_client *client) +static struct ov772x_priv *to_ov772x(struct v4l2_subdev *sd) { - return container_of(i2c_get_clientdata(client), struct ov772x_priv, - subdev); + return container_of(sd, struct ov772x_priv, subdev); } -static int ov772x_write_array(struct i2c_client *client, - const struct regval_list *vals) +static inline int ov772x_read(struct i2c_client *client, u8 addr) { - while (vals->reg_num != 0xff) { - int ret = i2c_smbus_write_byte_data(client, - vals->reg_num, - vals->value); - if (ret < 0) - return ret; - vals++; - } - return 0; + return i2c_smbus_read_byte_data(client, addr); +} + +static inline int ov772x_write(struct i2c_client *client, u8 addr, u8 value) +{ + return i2c_smbus_write_byte_data(client, addr, value); } -static int ov772x_mask_set(struct i2c_client *client, - u8 command, - u8 mask, - u8 set) +static int ov772x_mask_set(struct i2c_client *client, u8 command, u8 mask, + u8 set) { - s32 val = i2c_smbus_read_byte_data(client, command); + s32 val = ov772x_read(client, command); if (val < 0) return val; val &= ~mask; val |= set & mask; - return i2c_smbus_write_byte_data(client, command, val); + return ov772x_write(client, command, val); } static int ov772x_reset(struct i2c_client *client) { - int ret = i2c_smbus_write_byte_data(client, COM7, SCCB_RESET); + int ret; + + ret = ov772x_write(client, COM7, SCCB_RESET); + if (ret < 0) + return ret; + msleep(1); - return ret; + + return ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE); } /* @@ -573,18 +559,13 @@ static int ov772x_reset(struct i2c_client *client) static int ov772x_s_stream(struct v4l2_subdev *sd, int enable) { struct i2c_client *client = v4l2_get_subdevdata(sd); - struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev); + struct ov772x_priv *priv = to_ov772x(sd); if (!enable) { ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE); return 0; } - if (!priv->win || !priv->cfmt) { - dev_err(&client->dev, "norm or win select error\n"); - return -EPERM; - } - ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, 0); dev_dbg(&client->dev, "format %d, win %s\n", @@ -642,7 +623,7 @@ static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl) static int ov772x_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *id) { - struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev); + struct ov772x_priv *priv = to_ov772x(sd); id->ident = priv->model; id->revision = 0; @@ -661,7 +642,7 @@ static int ov772x_g_register(struct v4l2_subdev *sd, if (reg->reg > 0xff) return -EINVAL; - ret = i2c_smbus_read_byte_data(client, reg->reg); + ret = ov772x_read(client, reg->reg); if (ret < 0) return ret; @@ -679,54 +660,63 @@ static int ov772x_s_register(struct v4l2_subdev *sd, reg->val > 0xff) return -EINVAL; - return i2c_smbus_write_byte_data(client, reg->reg, reg->val); + return ov772x_write(client, reg->reg, reg->val); } #endif -static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height) +static int ov772x_s_power(struct v4l2_subdev *sd, int on) { - __u32 diff; - const struct ov772x_win_size *win; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); - /* default is QVGA */ - diff = abs(width - ov772x_win_qvga.width) + - abs(height - ov772x_win_qvga.height); - win = &ov772x_win_qvga; + return soc_camera_set_power(&client->dev, icl, on); +} - /* VGA */ - if (diff > - abs(width - ov772x_win_vga.width) + - abs(height - ov772x_win_vga.height)) - win = &ov772x_win_vga; +static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height) +{ + const struct ov772x_win_size *win = &ov772x_win_sizes[0]; + u32 best_diff = UINT_MAX; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(ov772x_win_sizes); ++i) { + u32 diff = abs(width - ov772x_win_sizes[i].rect.width) + + abs(height - ov772x_win_sizes[i].rect.height); + if (diff < best_diff) { + best_diff = diff; + win = &ov772x_win_sizes[i]; + } + } return win; } -static int ov772x_set_params(struct i2c_client *client, u32 *width, u32 *height, - enum v4l2_mbus_pixelcode code) +static void ov772x_select_params(const struct v4l2_mbus_framefmt *mf, + const struct ov772x_color_format **cfmt, + const struct ov772x_win_size **win) { - struct ov772x_priv *priv = to_ov772x(client); - int ret = -EINVAL; - u8 val; - int i; + unsigned int i; + + /* Select a format. */ + *cfmt = &ov772x_cfmts[0]; - /* - * select format - */ - priv->cfmt = NULL; for (i = 0; i < ARRAY_SIZE(ov772x_cfmts); i++) { - if (code == ov772x_cfmts[i].code) { - priv->cfmt = ov772x_cfmts + i; + if (mf->code == ov772x_cfmts[i].code) { + *cfmt = &ov772x_cfmts[i]; break; } } - if (!priv->cfmt) - goto ov772x_set_fmt_error; - /* - * select win - */ - priv->win = ov772x_select_win(*width, *height); + /* Select a window size. */ + *win = ov772x_select_win(mf->width, mf->height); +} + +static int ov772x_set_params(struct ov772x_priv *priv, + const struct ov772x_color_format *cfmt, + const struct ov772x_win_size *win) +{ + struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev); + int ret; + u8 val; /* * reset hardware @@ -780,17 +770,42 @@ static int ov772x_set_params(struct i2c_client *client, u32 *width, u32 *height, goto ov772x_set_fmt_error; } - /* - * set size format - */ - ret = ov772x_write_array(client, priv->win->regs); + /* Format and window size */ + ret = ov772x_write(client, HSTART, win->rect.left >> 2); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, HSIZE, win->rect.width >> 2); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, VSTART, win->rect.top >> 1); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, VSIZE, win->rect.height >> 1); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, HOUTSIZE, win->rect.width >> 2); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, VOUTSIZE, win->rect.height >> 1); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, HREF, + ((win->rect.top & 1) << HREF_VSTART_SHIFT) | + ((win->rect.left & 3) << HREF_HSTART_SHIFT) | + ((win->rect.height & 1) << HREF_VSIZE_SHIFT) | + ((win->rect.width & 3) << HREF_HSIZE_SHIFT)); + if (ret < 0) + goto ov772x_set_fmt_error; + ret = ov772x_write(client, EXHCH, + ((win->rect.height & 1) << EXHCH_VSIZE_SHIFT) | + ((win->rect.width & 3) << EXHCH_HSIZE_SHIFT)); if (ret < 0) goto ov772x_set_fmt_error; /* * set DSP_CTRL3 */ - val = priv->cfmt->dsp3; + val = cfmt->dsp3; if (val) { ret = ov772x_mask_set(client, DSP_CTRL3, UV_MASK, val); @@ -798,10 +813,17 @@ static int ov772x_set_params(struct i2c_client *client, u32 *width, u32 *height, goto ov772x_set_fmt_error; } + /* DSP_CTRL4: AEC reference point and DSP output format. */ + if (cfmt->dsp4) { + ret = ov772x_write(client, DSP_CTRL4, cfmt->dsp4); + if (ret < 0) + goto ov772x_set_fmt_error; + } + /* * set COM3 */ - val = priv->cfmt->com3; + val = cfmt->com3; if (priv->info->flags & OV772X_FLAG_VFLIP) val |= VFLIP_IMG; if (priv->info->flags & OV772X_FLAG_HFLIP) @@ -816,13 +838,8 @@ static int ov772x_set_params(struct i2c_client *client, u32 *width, u32 *height, if (ret < 0) goto ov772x_set_fmt_error; - /* - * set COM7 - */ - val = priv->win->com7_bit | priv->cfmt->com7; - ret = ov772x_mask_set(client, - COM7, SLCT_MASK | FMT_MASK | OFMT_MASK, - val); + /* COM7: Sensor resolution and output format control. */ + ret = ov772x_write(client, COM7, win->com7_bit | cfmt->com7); if (ret < 0) goto ov772x_set_fmt_error; @@ -838,16 +855,11 @@ static int ov772x_set_params(struct i2c_client *client, u32 *width, u32 *height, goto ov772x_set_fmt_error; } - *width = priv->win->width; - *height = priv->win->height; - return ret; ov772x_set_fmt_error: ov772x_reset(client); - priv->win = NULL; - priv->cfmt = NULL; return ret; } @@ -867,8 +879,8 @@ static int ov772x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) { a->bounds.left = 0; a->bounds.top = 0; - a->bounds.width = VGA_WIDTH; - a->bounds.height = VGA_HEIGHT; + a->bounds.width = OV772X_MAX_WIDTH; + a->bounds.height = OV772X_MAX_HEIGHT; a->defrect = a->bounds; a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; a->pixelaspect.numerator = 1; @@ -880,15 +892,10 @@ static int ov772x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) static int ov772x_g_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) { - struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev); - - if (!priv->win || !priv->cfmt) { - priv->cfmt = &ov772x_cfmts[0]; - priv->win = ov772x_select_win(VGA_WIDTH, VGA_HEIGHT); - } + struct ov772x_priv *priv = to_ov772x(sd); - mf->width = priv->win->width; - mf->height = priv->win->height; + mf->width = priv->win->rect.width; + mf->height = priv->win->rect.height; mf->code = priv->cfmt->code; mf->colorspace = priv->cfmt->colorspace; mf->field = V4L2_FIELD_NONE; @@ -896,70 +903,64 @@ static int ov772x_g_fmt(struct v4l2_subdev *sd, return 0; } -static int ov772x_s_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int ov772x_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) { - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev); - int ret = ov772x_set_params(client, &mf->width, &mf->height, - mf->code); + struct ov772x_priv *priv = to_ov772x(sd); + const struct ov772x_color_format *cfmt; + const struct ov772x_win_size *win; + int ret; - if (!ret) - mf->colorspace = priv->cfmt->colorspace; + ov772x_select_params(mf, &cfmt, &win); - return ret; + ret = ov772x_set_params(priv, cfmt, win); + if (ret < 0) + return ret; + + priv->win = win; + priv->cfmt = cfmt; + + mf->code = cfmt->code; + mf->width = win->rect.width; + mf->height = win->rect.height; + mf->field = V4L2_FIELD_NONE; + mf->colorspace = cfmt->colorspace; + + return 0; } static int ov772x_try_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) { - struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev); + const struct ov772x_color_format *cfmt; const struct ov772x_win_size *win; - int i; - /* - * select suitable win - */ - win = ov772x_select_win(mf->width, mf->height); + ov772x_select_params(mf, &cfmt, &win); - mf->width = win->width; - mf->height = win->height; - mf->field = V4L2_FIELD_NONE; - - for (i = 0; i < ARRAY_SIZE(ov772x_cfmts); i++) - if (mf->code == ov772x_cfmts[i].code) - break; - - if (i == ARRAY_SIZE(ov772x_cfmts)) { - /* Unsupported format requested. Propose either */ - if (priv->cfmt) { - /* the current one or */ - mf->colorspace = priv->cfmt->colorspace; - mf->code = priv->cfmt->code; - } else { - /* the default one */ - mf->colorspace = ov772x_cfmts[0].colorspace; - mf->code = ov772x_cfmts[0].code; - } - } else { - /* Also return the colorspace */ - mf->colorspace = ov772x_cfmts[i].colorspace; - } + mf->code = cfmt->code; + mf->width = win->rect.width; + mf->height = win->rect.height; + mf->field = V4L2_FIELD_NONE; + mf->colorspace = cfmt->colorspace; return 0; } -static int ov772x_video_probe(struct i2c_client *client) +static int ov772x_video_probe(struct ov772x_priv *priv) { - struct ov772x_priv *priv = to_ov772x(client); + struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev); u8 pid, ver; const char *devname; + int ret; + + ret = ov772x_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; /* * check and show product ID and manufacturer ID */ - pid = i2c_smbus_read_byte_data(client, PID); - ver = i2c_smbus_read_byte_data(client, VER); + pid = ov772x_read(client, PID); + ver = ov772x_read(client, VER); switch (VERSION(pid, ver)) { case OV7720: @@ -973,7 +974,8 @@ static int ov772x_video_probe(struct i2c_client *client) default: dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver); - return -ENODEV; + ret = -ENODEV; + goto done; } dev_info(&client->dev, @@ -981,9 +983,13 @@ static int ov772x_video_probe(struct i2c_client *client) devname, pid, ver, - i2c_smbus_read_byte_data(client, MIDH), - i2c_smbus_read_byte_data(client, MIDL)); - return v4l2_ctrl_handler_setup(&priv->hdl); + ov772x_read(client, MIDH), + ov772x_read(client, MIDL)); + ret = v4l2_ctrl_handler_setup(&priv->hdl); + +done: + ov772x_s_power(&priv->subdev, 0); + return ret; } static const struct v4l2_ctrl_ops ov772x_ctrl_ops = { @@ -996,6 +1002,7 @@ static struct v4l2_subdev_core_ops ov772x_subdev_core_ops = { .g_register = ov772x_g_register, .s_register = ov772x_s_register, #endif + .s_power = ov772x_s_power, }; static int ov772x_enum_fmt(struct v4l2_subdev *sd, unsigned int index, @@ -1079,24 +1086,28 @@ static int ov772x_probe(struct i2c_client *client, V4L2_CID_BAND_STOP_FILTER, 0, 256, 1, 0); priv->subdev.ctrl_handler = &priv->hdl; if (priv->hdl.error) { - int err = priv->hdl.error; - - kfree(priv); - return err; + ret = priv->hdl.error; + goto done; } - ret = ov772x_video_probe(client); + ret = ov772x_video_probe(priv); + if (ret < 0) + goto done; + + priv->cfmt = &ov772x_cfmts[0]; + priv->win = &ov772x_win_sizes[0]; + +done: if (ret) { v4l2_ctrl_handler_free(&priv->hdl); kfree(priv); } - return ret; } static int ov772x_remove(struct i2c_client *client) { - struct ov772x_priv *priv = to_ov772x(client); + struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client)); v4l2_device_unregister_subdev(&priv->subdev); v4l2_ctrl_handler_free(&priv->hdl); diff --git a/drivers/media/video/ov9640.c b/drivers/media/i2c/soc_camera/ov9640.c similarity index 97% rename from drivers/media/video/ov9640.c rename to drivers/media/i2c/soc_camera/ov9640.c index 9ed4ba4236c47e4adf9920e7a88f974b513f3fc0..b323684eaf77e445555c1ab90dfaacb154144491 100644 --- a/drivers/media/video/ov9640.c +++ b/drivers/media/i2c/soc_camera/ov9640.c @@ -333,6 +333,14 @@ static int ov9640_set_register(struct v4l2_subdev *sd, } #endif +static int ov9640_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + return soc_camera_set_power(&client->dev, icl, on); +} + /* select nearest higher resolution for capture */ static void ov9640_res_roundup(u32 *width, u32 *height) { @@ -584,7 +592,11 @@ static int ov9640_video_probe(struct i2c_client *client) struct ov9640_priv *priv = to_ov9640_sensor(sd); u8 pid, ver, midh, midl; const char *devname; - int ret = 0; + int ret; + + ret = ov9640_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; /* * check and show product ID and manufacturer ID @@ -598,7 +610,7 @@ static int ov9640_video_probe(struct i2c_client *client) if (!ret) ret = ov9640_reg_read(client, OV9640_MIDL, &midl); if (ret) - return ret; + goto done; switch (VERSION(pid, ver)) { case OV9640_V2: @@ -613,13 +625,18 @@ static int ov9640_video_probe(struct i2c_client *client) break; default: dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver); - return -ENODEV; + ret = -ENODEV; + goto done; } dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n", devname, pid, ver, midh, midl); - return v4l2_ctrl_handler_setup(&priv->hdl); + ret = v4l2_ctrl_handler_setup(&priv->hdl); + +done: + ov9640_s_power(&priv->subdev, 0); + return ret; } static const struct v4l2_ctrl_ops ov9640_ctrl_ops = { @@ -632,7 +649,7 @@ static struct v4l2_subdev_core_ops ov9640_core_ops = { .g_register = ov9640_get_register, .s_register = ov9640_set_register, #endif - + .s_power = ov9640_s_power, }; /* Request bus settings on camera side */ diff --git a/drivers/media/video/ov9640.h b/drivers/media/i2c/soc_camera/ov9640.h similarity index 100% rename from drivers/media/video/ov9640.h rename to drivers/media/i2c/soc_camera/ov9640.h diff --git a/drivers/media/video/ov9740.c b/drivers/media/i2c/soc_camera/ov9740.c similarity index 97% rename from drivers/media/video/ov9740.c rename to drivers/media/i2c/soc_camera/ov9740.c index 3eb07c22516e6b9b46e8e2d3257f58f5532436f0..7a55889e397b3be3334cd9b7dd85e7045e6e17c8 100644 --- a/drivers/media/video/ov9740.c +++ b/drivers/media/i2c/soc_camera/ov9740.c @@ -786,17 +786,27 @@ static int ov9740_g_chip_ident(struct v4l2_subdev *sd, static int ov9740_s_power(struct v4l2_subdev *sd, int on) { + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); struct ov9740_priv *priv = to_ov9740(sd); - - if (!priv->current_enable) - return 0; + int ret; if (on) { - ov9740_s_fmt(sd, &priv->current_mf); - ov9740_s_stream(sd, priv->current_enable); + ret = soc_camera_power_on(&client->dev, icl); + if (ret < 0) + return ret; + + if (priv->current_enable) { + ov9740_s_fmt(sd, &priv->current_mf); + ov9740_s_stream(sd, 1); + } } else { - ov9740_s_stream(sd, 0); - priv->current_enable = true; + if (priv->current_enable) { + ov9740_s_stream(sd, 0); + priv->current_enable = true; + } + + soc_camera_power_off(&client->dev, icl); } return 0; @@ -843,34 +853,38 @@ static int ov9740_video_probe(struct i2c_client *client) u8 modelhi, modello; int ret; + ret = ov9740_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; + /* * check and show product ID and manufacturer ID */ ret = ov9740_reg_read(client, OV9740_MODEL_ID_HI, &modelhi); if (ret < 0) - goto err; + goto done; ret = ov9740_reg_read(client, OV9740_MODEL_ID_LO, &modello); if (ret < 0) - goto err; + goto done; priv->model = (modelhi << 8) | modello; ret = ov9740_reg_read(client, OV9740_REVISION_NUMBER, &priv->revision); if (ret < 0) - goto err; + goto done; ret = ov9740_reg_read(client, OV9740_MANUFACTURER_ID, &priv->manid); if (ret < 0) - goto err; + goto done; ret = ov9740_reg_read(client, OV9740_SMIA_VERSION, &priv->smiaver); if (ret < 0) - goto err; + goto done; if (priv->model != 0x9740) { ret = -ENODEV; - goto err; + goto done; } priv->ident = V4L2_IDENT_OV9740; @@ -879,7 +893,10 @@ static int ov9740_video_probe(struct i2c_client *client) "Manufacturer 0x%02x, SMIA Version 0x%02x\n", priv->model, priv->revision, priv->manid, priv->smiaver); -err: + ret = v4l2_ctrl_handler_setup(&priv->hdl); + +done: + ov9740_s_power(&priv->subdev, 0); return ret; } @@ -963,8 +980,6 @@ static int ov9740_probe(struct i2c_client *client, } ret = ov9740_video_probe(client); - if (!ret) - ret = v4l2_ctrl_handler_setup(&priv->hdl); if (ret < 0) { v4l2_ctrl_handler_free(&priv->hdl); kfree(priv); diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/i2c/soc_camera/rj54n1cb0c.c similarity index 98% rename from drivers/media/video/rj54n1cb0c.c rename to drivers/media/i2c/soc_camera/rj54n1cb0c.c index f6419b22c258061bb6eeb10a8f3593ebab677d06..02f0400051d9255a72a52e702bd7eacebc63261b 100644 --- a/drivers/media/video/rj54n1cb0c.c +++ b/drivers/media/i2c/soc_camera/rj54n1cb0c.c @@ -536,11 +536,11 @@ static int rj54n1_commit(struct i2c_client *client) static int rj54n1_sensor_scale(struct v4l2_subdev *sd, s32 *in_w, s32 *in_h, s32 *out_w, s32 *out_h); -static int rj54n1_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +static int rj54n1_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct rj54n1 *rj54n1 = to_rj54n1(client); - struct v4l2_rect *rect = &a->c; + const struct v4l2_rect *rect = &a->c; int dummy = 0, output_w, output_h, input_w = rect->width, input_h = rect->height; int ret; @@ -1180,6 +1180,14 @@ static int rj54n1_s_register(struct v4l2_subdev *sd, } #endif +static int rj54n1_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + return soc_camera_set_power(&client->dev, icl, on); +} + static int rj54n1_s_ctrl(struct v4l2_ctrl *ctrl) { struct rj54n1 *rj54n1 = container_of(ctrl->handler, struct rj54n1, hdl); @@ -1230,6 +1238,7 @@ static struct v4l2_subdev_core_ops rj54n1_subdev_core_ops = { .g_register = rj54n1_g_register, .s_register = rj54n1_s_register, #endif + .s_power = rj54n1_s_power, }; static int rj54n1_g_mbus_config(struct v4l2_subdev *sd, @@ -1287,9 +1296,14 @@ static struct v4l2_subdev_ops rj54n1_subdev_ops = { static int rj54n1_video_probe(struct i2c_client *client, struct rj54n1_pdata *priv) { + struct rj54n1 *rj54n1 = to_rj54n1(client); int data1, data2; int ret; + ret = rj54n1_s_power(&rj54n1->subdev, 1); + if (ret < 0) + return ret; + /* Read out the chip version register */ data1 = reg_read(client, RJ54N1_DEV_CODE); data2 = reg_read(client, RJ54N1_DEV_CODE2); @@ -1298,18 +1312,21 @@ static int rj54n1_video_probe(struct i2c_client *client, ret = -ENODEV; dev_info(&client->dev, "No RJ54N1CB0C found, read 0x%x:0x%x\n", data1, data2); - goto ei2c; + goto done; } /* Configure IOCTL polarity from the platform data: 0 or 1 << 7. */ ret = reg_write(client, RJ54N1_IOC, priv->ioctl_high << 7); if (ret < 0) - goto ei2c; + goto done; dev_info(&client->dev, "Detected a RJ54N1CB0C chip ID 0x%x:0x%x\n", data1, data2); -ei2c: + ret = v4l2_ctrl_handler_setup(&rj54n1->hdl); + +done: + rj54n1_s_power(&rj54n1->subdev, 0); return ret; } @@ -1373,9 +1390,9 @@ static int rj54n1_probe(struct i2c_client *client, if (ret < 0) { v4l2_ctrl_handler_free(&rj54n1->hdl); kfree(rj54n1); - return ret; } - return v4l2_ctrl_handler_setup(&rj54n1->hdl); + + return ret; } static int rj54n1_remove(struct i2c_client *client) diff --git a/drivers/media/video/tw9910.c b/drivers/media/i2c/soc_camera/tw9910.c similarity index 98% rename from drivers/media/video/tw9910.c rename to drivers/media/i2c/soc_camera/tw9910.c index 9f53eacb66e3cd89a75f14ec08b0ced3ea752385..140716e71a158d69c23a82c670bd8387b2a632a8 100644 --- a/drivers/media/video/tw9910.c +++ b/drivers/media/i2c/soc_camera/tw9910.c @@ -566,6 +566,14 @@ static int tw9910_s_register(struct v4l2_subdev *sd, } #endif +static int tw9910_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + return soc_camera_set_power(&client->dev, icl, on); +} + static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -772,6 +780,7 @@ static int tw9910_video_probe(struct i2c_client *client) { struct tw9910_priv *priv = to_tw9910(client); s32 id; + int ret; /* * tw9910 only use 8 or 16 bit bus width @@ -782,6 +791,10 @@ static int tw9910_video_probe(struct i2c_client *client) return -ENODEV; } + ret = tw9910_s_power(&priv->subdev, 1); + if (ret < 0) + return ret; + /* * check and show Product ID * So far only revisions 0 and 1 have been seen @@ -795,7 +808,8 @@ static int tw9910_video_probe(struct i2c_client *client) dev_err(&client->dev, "Product ID error %x:%x\n", id, priv->revision); - return -ENODEV; + ret = -ENODEV; + goto done; } dev_info(&client->dev, @@ -803,7 +817,9 @@ static int tw9910_video_probe(struct i2c_client *client) priv->norm = V4L2_STD_NTSC; - return 0; +done: + tw9910_s_power(&priv->subdev, 0); + return ret; } static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = { @@ -814,6 +830,7 @@ static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = { .g_register = tw9910_g_register, .s_register = tw9910_s_register, #endif + .s_power = tw9910_s_power, }; static int tw9910_enum_fmt(struct v4l2_subdev *sd, unsigned int index, diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/i2c/sr030pc30.c similarity index 100% rename from drivers/media/video/sr030pc30.c rename to drivers/media/i2c/sr030pc30.c diff --git a/drivers/media/video/tcm825x.c b/drivers/media/i2c/tcm825x.c similarity index 99% rename from drivers/media/video/tcm825x.c rename to drivers/media/i2c/tcm825x.c index 462caa44ae001c1a802fe8ca48f46052bcd59917..9252529fc5ddd69f7bd9aa8ff8e20072cb111aab 100644 --- a/drivers/media/video/tcm825x.c +++ b/drivers/media/i2c/tcm825x.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/tcm825x.c + * drivers/media/i2c/tcm825x.c * * TCM825X camera sensor driver. * diff --git a/drivers/media/video/tcm825x.h b/drivers/media/i2c/tcm825x.h similarity index 99% rename from drivers/media/video/tcm825x.h rename to drivers/media/i2c/tcm825x.h index 5b7e69682368c6189a2965386ced056e7ba5ac48..8ebab953963f869b5f63ea4e8686def0e5e9f573 100644 --- a/drivers/media/video/tcm825x.h +++ b/drivers/media/i2c/tcm825x.h @@ -1,5 +1,5 @@ /* - * drivers/media/video/tcm825x.h + * drivers/media/i2c/tcm825x.h * * Register definitions for the TCM825X CameraChip. * diff --git a/drivers/media/video/tda7432.c b/drivers/media/i2c/tda7432.c similarity index 100% rename from drivers/media/video/tda7432.c rename to drivers/media/i2c/tda7432.c diff --git a/drivers/media/video/tda9840.c b/drivers/media/i2c/tda9840.c similarity index 100% rename from drivers/media/video/tda9840.c rename to drivers/media/i2c/tda9840.c diff --git a/drivers/media/video/tea6415c.c b/drivers/media/i2c/tea6415c.c similarity index 99% rename from drivers/media/video/tea6415c.c rename to drivers/media/i2c/tea6415c.c index d1d6ea1dd2739140cb7c456f9c14c13b70a87458..3d5b06a5c308c9db906b995bea7830093cdeb655 100644 --- a/drivers/media/video/tea6415c.c +++ b/drivers/media/i2c/tea6415c.c @@ -81,7 +81,7 @@ static int tea6415c_s_routing(struct v4l2_subdev *sd, case 13: byte = 0x28; break; - }; + } switch (i) { case 5: @@ -108,7 +108,7 @@ static int tea6415c_s_routing(struct v4l2_subdev *sd, case 11: byte |= 0x07; break; - }; + } ret = i2c_smbus_write_byte(client, byte); if (ret) { diff --git a/drivers/media/video/tea6415c.h b/drivers/media/i2c/tea6415c.h similarity index 100% rename from drivers/media/video/tea6415c.h rename to drivers/media/i2c/tea6415c.h diff --git a/drivers/media/video/tea6420.c b/drivers/media/i2c/tea6420.c similarity index 100% rename from drivers/media/video/tea6420.c rename to drivers/media/i2c/tea6420.c diff --git a/drivers/media/video/tea6420.h b/drivers/media/i2c/tea6420.h similarity index 100% rename from drivers/media/video/tea6420.h rename to drivers/media/i2c/tea6420.h diff --git a/drivers/media/video/ths7303.c b/drivers/media/i2c/ths7303.c similarity index 100% rename from drivers/media/video/ths7303.c rename to drivers/media/i2c/ths7303.c diff --git a/drivers/media/video/tlv320aic23b.c b/drivers/media/i2c/tlv320aic23b.c similarity index 100% rename from drivers/media/video/tlv320aic23b.c rename to drivers/media/i2c/tlv320aic23b.c diff --git a/drivers/media/video/tvaudio.c b/drivers/media/i2c/tvaudio.c similarity index 99% rename from drivers/media/video/tvaudio.c rename to drivers/media/i2c/tvaudio.c index 321b3153df87abe1537bab907121d98012d25838..3b24d3fc186647751d94f0b1ba04a3dd23c4d8cf 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/i2c/tvaudio.c @@ -7,6 +7,10 @@ * Steve VanDeBogart (vandebo@uclink.berkeley.edu) * Greg Alexander (galexand@acm.org) * + * For the TDA9875 part: + * Copyright (c) 2000 Guillaume Delvit based on Gerd Knorr source + * and Eric Sandeen + * * Copyright(c) 2005-2008 Mauro Carvalho Chehab * - Some cleanups, code fixes, etc * - Convert it to V4L2 API @@ -217,8 +221,17 @@ static int chip_read2(struct CHIPSTATE *chip, int subaddr) unsigned char write[1]; unsigned char read[1]; struct i2c_msg msgs[2] = { - { c->addr, 0, 1, write }, - { c->addr, I2C_M_RD, 1, read } + { + .addr = c->addr, + .len = 1, + .buf = write + }, + { + .addr = c->addr, + .flags = I2C_M_RD, + .len = 1, + .buf = read + } }; write[0] = subaddr; diff --git a/drivers/media/video/tveeprom.c b/drivers/media/i2c/tveeprom.c similarity index 100% rename from drivers/media/video/tveeprom.c rename to drivers/media/i2c/tveeprom.c diff --git a/drivers/media/video/tvp514x.c b/drivers/media/i2c/tvp514x.c similarity index 99% rename from drivers/media/video/tvp514x.c rename to drivers/media/i2c/tvp514x.c index cd615c1d6011feaa31405336e13ce07dc0348a2f..1f3943bb87d531bdc16337feb7f6a36c2e232fbb 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/i2c/tvp514x.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/tvp514x.c + * drivers/media/i2c/tvp514x.c * * TI TVP5146/47 decoder driver * diff --git a/drivers/media/video/tvp514x_regs.h b/drivers/media/i2c/tvp514x_regs.h similarity index 99% rename from drivers/media/video/tvp514x_regs.h rename to drivers/media/i2c/tvp514x_regs.h index 18f29ad0dfe2cfbe84db9c694ed1a95be87b316b..d23aa2fbb9b1e2f6f540ad7864298a28d4a3b3b4 100644 --- a/drivers/media/video/tvp514x_regs.h +++ b/drivers/media/i2c/tvp514x_regs.h @@ -1,5 +1,5 @@ /* - * drivers/media/video/tvp514x_regs.h + * drivers/media/i2c/tvp514x_regs.h * * Copyright (C) 2008 Texas Instruments Inc * Author: Vaibhav Hiremath diff --git a/drivers/media/video/tvp5150.c b/drivers/media/i2c/tvp5150.c similarity index 99% rename from drivers/media/video/tvp5150.c rename to drivers/media/i2c/tvp5150.c index a751b6c146fdb523a6a8f3c00cdd9edf84f1f716..31104a9606529a1ad57040527e9e3cc53f8361f9 100644 --- a/drivers/media/video/tvp5150.c +++ b/drivers/media/i2c/tvp5150.c @@ -865,7 +865,7 @@ static int tvp5150_mbus_fmt(struct v4l2_subdev *sd, return 0; } -static int tvp5150_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +static int tvp5150_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) { struct v4l2_rect rect = a->c; struct tvp5150 *decoder = to_tvp5150(sd); @@ -1020,7 +1020,7 @@ static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_f { int i, mask = 0; - memset(svbi, 0, sizeof(*svbi)); + memset(svbi->service_lines, 0, sizeof(svbi->service_lines)); for (i = 0; i <= 23; i++) { svbi->service_lines[0][i] = diff --git a/drivers/media/video/tvp5150_reg.h b/drivers/media/i2c/tvp5150_reg.h similarity index 100% rename from drivers/media/video/tvp5150_reg.h rename to drivers/media/i2c/tvp5150_reg.h diff --git a/drivers/media/video/tvp7002.c b/drivers/media/i2c/tvp7002.c similarity index 100% rename from drivers/media/video/tvp7002.c rename to drivers/media/i2c/tvp7002.c diff --git a/drivers/media/video/tvp7002_reg.h b/drivers/media/i2c/tvp7002_reg.h similarity index 100% rename from drivers/media/video/tvp7002_reg.h rename to drivers/media/i2c/tvp7002_reg.h diff --git a/drivers/media/video/upd64031a.c b/drivers/media/i2c/upd64031a.c similarity index 100% rename from drivers/media/video/upd64031a.c rename to drivers/media/i2c/upd64031a.c diff --git a/drivers/media/video/upd64083.c b/drivers/media/i2c/upd64083.c similarity index 100% rename from drivers/media/video/upd64083.c rename to drivers/media/i2c/upd64083.c diff --git a/drivers/media/video/vp27smpx.c b/drivers/media/i2c/vp27smpx.c similarity index 100% rename from drivers/media/video/vp27smpx.c rename to drivers/media/i2c/vp27smpx.c diff --git a/drivers/media/video/vpx3220.c b/drivers/media/i2c/vpx3220.c similarity index 100% rename from drivers/media/video/vpx3220.c rename to drivers/media/i2c/vpx3220.c diff --git a/drivers/media/video/vs6624.c b/drivers/media/i2c/vs6624.c similarity index 100% rename from drivers/media/video/vs6624.c rename to drivers/media/i2c/vs6624.c diff --git a/drivers/media/video/vs6624_regs.h b/drivers/media/i2c/vs6624_regs.h similarity index 100% rename from drivers/media/video/vs6624_regs.h rename to drivers/media/i2c/vs6624_regs.h diff --git a/drivers/media/video/wm8739.c b/drivers/media/i2c/wm8739.c similarity index 100% rename from drivers/media/video/wm8739.c rename to drivers/media/i2c/wm8739.c diff --git a/drivers/media/video/wm8775.c b/drivers/media/i2c/wm8775.c similarity index 100% rename from drivers/media/video/wm8775.c rename to drivers/media/i2c/wm8775.c diff --git a/drivers/media/media-device.c b/drivers/media/media-device.c index 6f9eb94e85b387f78f144fd74c244e0e0859237a..d01fcb7e87c2558e1b2c48c504d7dda0efada8df 100644 --- a/drivers/media/media-device.c +++ b/drivers/media/media-device.c @@ -59,7 +59,9 @@ static int media_device_get_info(struct media_device *dev, info.hw_revision = dev->hw_revision; info.driver_version = dev->driver_version; - return copy_to_user(__info, &info, sizeof(*__info)); + if (copy_to_user(__info, &info, sizeof(*__info))) + return -EFAULT; + return 0; } static struct media_entity *find_entity(struct media_device *mdev, u32 id) diff --git a/drivers/media/media-devnode.c b/drivers/media/media-devnode.c index f6b52d5494309cb0b3829916136d8352fc57adc1..023b2a1cbb9b73ba6829f387f28e85f9f3f72e91 100644 --- a/drivers/media/media-devnode.c +++ b/drivers/media/media-devnode.c @@ -30,6 +30,8 @@ * counting. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -215,7 +217,7 @@ int __must_check media_devnode_register(struct media_devnode *mdev) minor = find_next_zero_bit(media_devnode_nums, MEDIA_NUM_DEVICES, 0); if (minor == MEDIA_NUM_DEVICES) { mutex_unlock(&media_devnode_lock); - printk(KERN_ERR "could not get a free minor\n"); + pr_err("could not get a free minor\n"); return -ENFILE; } @@ -230,7 +232,7 @@ int __must_check media_devnode_register(struct media_devnode *mdev) ret = cdev_add(&mdev->cdev, MKDEV(MAJOR(media_dev_t), mdev->minor), 1); if (ret < 0) { - printk(KERN_ERR "%s: cdev_add failed\n", __func__); + pr_err("%s: cdev_add failed\n", __func__); goto error; } @@ -243,7 +245,7 @@ int __must_check media_devnode_register(struct media_devnode *mdev) dev_set_name(&mdev->dev, "media%d", mdev->minor); ret = device_register(&mdev->dev); if (ret < 0) { - printk(KERN_ERR "%s: device_register failed\n", __func__); + pr_err("%s: device_register failed\n", __func__); goto error; } @@ -287,18 +289,18 @@ static int __init media_devnode_init(void) { int ret; - printk(KERN_INFO "Linux media interface: v0.10\n"); + pr_info("Linux media interface: v0.10\n"); ret = alloc_chrdev_region(&media_dev_t, 0, MEDIA_NUM_DEVICES, MEDIA_NAME); if (ret < 0) { - printk(KERN_WARNING "media: unable to allocate major\n"); + pr_warn("unable to allocate major\n"); return ret; } ret = bus_register(&media_bus_type); if (ret < 0) { unregister_chrdev_region(media_dev_t, MEDIA_NUM_DEVICES); - printk(KERN_WARNING "media: bus_register failed\n"); + pr_warn("bus_register failed\n"); return -EIO; } diff --git a/drivers/media/mmc/Kconfig b/drivers/media/mmc/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..8c30ada27c799e678ab01d7a9652a43e60ee085c --- /dev/null +++ b/drivers/media/mmc/Kconfig @@ -0,0 +1,2 @@ +comment "Supported MMC/SDIO adapters" +source "drivers/media/mmc/siano/Kconfig" diff --git a/drivers/media/mmc/Makefile b/drivers/media/mmc/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..31e297a202fb83f2fc6dc5df47a5c452a329cd5c --- /dev/null +++ b/drivers/media/mmc/Makefile @@ -0,0 +1 @@ +obj-y += siano/ diff --git a/drivers/media/mmc/siano/Kconfig b/drivers/media/mmc/siano/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..fa62475be3bf865f730f47e7eef5761ffe6e9522 --- /dev/null +++ b/drivers/media/mmc/siano/Kconfig @@ -0,0 +1,10 @@ +# +# Siano Mobile Silicon Digital TV device configuration +# + +config SMS_SDIO_DRV + tristate "Siano SMS1xxx based MDTV via SDIO interface" + depends on DVB_CORE && RC_CORE && HAS_DMA + depends on MMC + ---help--- + Choose if you would like to have Siano's support for SDIO interface diff --git a/drivers/media/mmc/siano/Makefile b/drivers/media/mmc/siano/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..0e01f973db6b283cbff8ea9637ef8e00f6c798ea --- /dev/null +++ b/drivers/media/mmc/siano/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o + +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/common/siano +ccflags-y += $(extra-cflags-y) $(extra-cflags-m) + diff --git a/drivers/media/dvb/siano/smssdio.c b/drivers/media/mmc/siano/smssdio.c similarity index 100% rename from drivers/media/dvb/siano/smssdio.c rename to drivers/media/mmc/siano/smssdio.c diff --git a/drivers/media/parport/Kconfig b/drivers/media/parport/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..ece13dcff07dfa062b3dde11b7d69afa0da27da3 --- /dev/null +++ b/drivers/media/parport/Kconfig @@ -0,0 +1,52 @@ +menuconfig MEDIA_PARPORT_SUPPORT + bool "ISA and parallel port devices" + depends on (ISA || PARPORT) && MEDIA_CAMERA_SUPPORT + help + Enables drivers for ISA and parallel port bus. If you + need media drivers using those legacy buses, say Y. + +if MEDIA_PARPORT_SUPPORT +config VIDEO_BWQCAM + tristate "Quickcam BW Video For Linux" + depends on PARPORT && VIDEO_V4L2 + help + Say Y have if you the black and white version of the QuickCam + camera. See the next option for the color version. + + To compile this driver as a module, choose M here: the + module will be called bw-qcam. + +config VIDEO_CQCAM + tristate "QuickCam Colour Video For Linux" + depends on PARPORT && VIDEO_V4L2 + help + This is the video4linux driver for the colour version of the + Connectix QuickCam. If you have one of these cameras, say Y here, + otherwise say N. This driver does not work with the original + monochrome QuickCam, QuickCam VC or QuickClip. It is also available + as a module (c-qcam). + Read for more information. + +config VIDEO_PMS + tristate "Mediavision Pro Movie Studio Video For Linux" + depends on ISA && VIDEO_V4L2 + help + Say Y if you have the ISA Mediavision Pro Movie Studio + capture card. + + To compile this driver as a module, choose M here: the + module will be called pms. + +config VIDEO_W9966 + tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" + depends on PARPORT_1284 && PARPORT && VIDEO_V4L2 + help + Video4linux driver for Winbond's w9966 based Webcams. + Currently tested with the LifeView FlyCam Supra. + If you have one of these cameras, say Y here + otherwise say N. + This driver is also available as a module (w9966). + + Check out for more + information. +endif diff --git a/drivers/media/parport/Makefile b/drivers/media/parport/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..4eea06d7af5ba13ff74a2fc41afd85e24caff389 --- /dev/null +++ b/drivers/media/parport/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o +obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o +obj-$(CONFIG_VIDEO_W9966) += w9966.o +obj-$(CONFIG_VIDEO_PMS) += pms.o diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/parport/bw-qcam.c similarity index 100% rename from drivers/media/video/bw-qcam.c rename to drivers/media/parport/bw-qcam.c diff --git a/drivers/media/video/c-qcam.c b/drivers/media/parport/c-qcam.c similarity index 100% rename from drivers/media/video/c-qcam.c rename to drivers/media/parport/c-qcam.c diff --git a/drivers/media/video/pms.c b/drivers/media/parport/pms.c similarity index 100% rename from drivers/media/video/pms.c rename to drivers/media/parport/pms.c diff --git a/drivers/media/video/w9966.c b/drivers/media/parport/w9966.c similarity index 100% rename from drivers/media/video/w9966.c rename to drivers/media/parport/w9966.c diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..d4e2ed3f27e5edd45ab63caf69e77c2364e23a43 --- /dev/null +++ b/drivers/media/pci/Kconfig @@ -0,0 +1,47 @@ +menuconfig MEDIA_PCI_SUPPORT + bool "Media PCI Adapters" + depends on PCI && MEDIA_SUPPORT + help + Enable media drivers for PCI/PCIe bus. + If you have such devices, say Y. + +if MEDIA_PCI_SUPPORT + +if MEDIA_CAMERA_SUPPORT + comment "Media capture support" +source "drivers/media/pci/meye/Kconfig" +source "drivers/media/pci/sta2x11/Kconfig" +endif + +if MEDIA_ANALOG_TV_SUPPORT + comment "Media capture/analog TV support" +source "drivers/media/pci/ivtv/Kconfig" +source "drivers/media/pci/zoran/Kconfig" +source "drivers/media/pci/saa7146/Kconfig" +endif + +if MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT + comment "Media capture/analog/hybrid TV support" +source "drivers/media/pci/cx18/Kconfig" +source "drivers/media/pci/cx23885/Kconfig" +source "drivers/media/pci/cx25821/Kconfig" +source "drivers/media/pci/cx88/Kconfig" +source "drivers/media/pci/bt8xx/Kconfig" +source "drivers/media/pci/saa7134/Kconfig" +source "drivers/media/pci/saa7164/Kconfig" + +endif + +if MEDIA_DIGITAL_TV_SUPPORT + comment "Media digital TV PCI Adapters" +source "drivers/media/pci/ttpci/Kconfig" +source "drivers/media/pci/b2c2/Kconfig" +source "drivers/media/pci/pluto2/Kconfig" +source "drivers/media/pci/dm1105/Kconfig" +source "drivers/media/pci/pt1/Kconfig" +source "drivers/media/pci/mantis/Kconfig" +source "drivers/media/pci/ngene/Kconfig" +source "drivers/media/pci/ddbridge/Kconfig" +endif + +endif #MEDIA_PCI_SUPPORT diff --git a/drivers/media/pci/Makefile b/drivers/media/pci/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..35cc57862c01be0df5e34de063a7bc6743496cbf --- /dev/null +++ b/drivers/media/pci/Makefile @@ -0,0 +1,26 @@ +# +# Makefile for the kernel multimedia device drivers. +# + +obj-y += ttpci/ \ + b2c2/ \ + pluto2/ \ + dm1105/ \ + pt1/ \ + mantis/ \ + ngene/ \ + ddbridge/ \ + b2c2/ \ + saa7146/ + +obj-$(CONFIG_VIDEO_IVTV) += ivtv/ +obj-$(CONFIG_VIDEO_ZORAN) += zoran/ +obj-$(CONFIG_VIDEO_CX18) += cx18/ +obj-$(CONFIG_VIDEO_CX23885) += cx23885/ +obj-$(CONFIG_VIDEO_CX25821) += cx25821/ +obj-$(CONFIG_VIDEO_CX88) += cx88/ +obj-$(CONFIG_VIDEO_BT848) += bt8xx/ +obj-$(CONFIG_VIDEO_SAA7134) += saa7134/ +obj-$(CONFIG_VIDEO_SAA7164) += saa7164/ +obj-$(CONFIG_VIDEO_MEYE) += meye/ +obj-$(CONFIG_STA2X11_VIP) += sta2x11/ diff --git a/drivers/media/pci/b2c2/Kconfig b/drivers/media/pci/b2c2/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..58761a21caa03705b2afe0d411964a8ea0bcc618 --- /dev/null +++ b/drivers/media/pci/b2c2/Kconfig @@ -0,0 +1,15 @@ +config DVB_B2C2_FLEXCOP_PCI + tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI" + depends on DVB_CORE && I2C + help + Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2. + + Say Y if you own such a device and want to use it. + +config DVB_B2C2_FLEXCOP_PCI_DEBUG + bool "Enable debug for the B2C2 FlexCop drivers" + depends on DVB_B2C2_FLEXCOP_PCI + select DVB_B2C2_FLEXCOP_DEBUG + help + Say Y if you want to enable the module option to control debug messages + of all B2C2 FlexCop drivers. diff --git a/drivers/media/pci/b2c2/Makefile b/drivers/media/pci/b2c2/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..b894320a5f212c051082aa54186d7d3bdcbdda7f --- /dev/null +++ b/drivers/media/pci/b2c2/Makefile @@ -0,0 +1,9 @@ +ifneq ($(CONFIG_DVB_B2C2_FLEXCOP_PCI),) +b2c2-flexcop-pci-objs += flexcop-dma.o +endif + +b2c2-flexcop-pci-objs += flexcop-pci.o +obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o + +ccflags-y += -Idrivers/media/dvb-core/ +ccflags-y += -Idrivers/media/common/b2c2/ diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/pci/b2c2/flexcop-dma.c similarity index 100% rename from drivers/media/dvb/b2c2/flexcop-dma.c rename to drivers/media/pci/b2c2/flexcop-dma.c diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/pci/b2c2/flexcop-pci.c similarity index 100% rename from drivers/media/dvb/b2c2/flexcop-pci.c rename to drivers/media/pci/b2c2/flexcop-pci.c diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..61d09e010814d7c5ff0f6bc379ccf91549f884f3 --- /dev/null +++ b/drivers/media/pci/bt8xx/Kconfig @@ -0,0 +1,43 @@ +config VIDEO_BT848 + tristate "BT848 Video For Linux" + depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 + select I2C_ALGOBIT + select VIDEO_BTCX + select VIDEOBUF_DMA_SG + depends on RC_CORE + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_TVAUDIO if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_TDA7432 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_SAA6588 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + Support for BT848 based frame grabber/overlay boards. This includes + the Miro, Hauppauge and STB boards. Please read the material in + for more information. + + To compile this driver as a module, choose M here: the + module will be called bttv. + +config DVB_BT8XX + tristate "DVB/ATSC Support for bt878 based TV cards" + depends on DVB_CORE && PCI && I2C && VIDEO_BT848 + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_SP887X if MEDIA_SUBDRV_AUTOSELECT + select DVB_NXT6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24110 if MEDIA_SUBDRV_AUTOSELECT + select DVB_OR51211 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + help + Support for PCI cards based on the Bt8xx PCI bridge. Examples are + the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards, + the pcHDTV HD2000 cards, the DViCO FusionHDTV Lite cards, and + some AVerMedia cards. + + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the PCI bus, so you need + an external software decoder to watch TV on your computer. + + Say Y if you own such a device and want to use it. diff --git a/drivers/media/pci/bt8xx/Makefile b/drivers/media/pci/bt8xx/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..5f06597c6a6e1d59c95e3fc3aca613ba7386cdcc --- /dev/null +++ b/drivers/media/pci/bt8xx/Makefile @@ -0,0 +1,11 @@ +bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \ + bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \ + bttv-input.o bttv-audio-hook.o + +obj-$(CONFIG_VIDEO_BT848) += bttv.o +obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o + +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/tuners diff --git a/drivers/media/video/bt8xx/bt848.h b/drivers/media/pci/bt8xx/bt848.h similarity index 100% rename from drivers/media/video/bt8xx/bt848.h rename to drivers/media/pci/bt8xx/bt848.h diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c similarity index 100% rename from drivers/media/dvb/bt8xx/bt878.c rename to drivers/media/pci/bt8xx/bt878.c diff --git a/drivers/media/dvb/bt8xx/bt878.h b/drivers/media/pci/bt8xx/bt878.h similarity index 100% rename from drivers/media/dvb/bt8xx/bt878.h rename to drivers/media/pci/bt8xx/bt878.h diff --git a/drivers/media/video/bt8xx/bttv-audio-hook.c b/drivers/media/pci/bt8xx/bttv-audio-hook.c similarity index 100% rename from drivers/media/video/bt8xx/bttv-audio-hook.c rename to drivers/media/pci/bt8xx/bttv-audio-hook.c diff --git a/drivers/media/video/bt8xx/bttv-audio-hook.h b/drivers/media/pci/bt8xx/bttv-audio-hook.h similarity index 100% rename from drivers/media/video/bt8xx/bttv-audio-hook.h rename to drivers/media/pci/bt8xx/bttv-audio-hook.h diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/pci/bt8xx/bttv-cards.c similarity index 100% rename from drivers/media/video/bt8xx/bttv-cards.c rename to drivers/media/pci/bt8xx/bttv-cards.c diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c similarity index 99% rename from drivers/media/video/bt8xx/bttv-driver.c rename to drivers/media/pci/bt8xx/bttv-driver.c index b58ff87db771750dfa7a511d7f382b924dba8814..16f5ca23698c69af3795d5e6a3c90168fc6fee4c 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/pci/bt8xx/bttv-driver.c @@ -2740,7 +2740,7 @@ static int bttv_overlay(struct file *file, void *f, unsigned int on) } static int bttv_s_fbuf(struct file *file, void *f, - struct v4l2_framebuffer *fb) + const struct v4l2_framebuffer *fb) { struct bttv_fh *fh = f; struct bttv *btv = fh->btv; @@ -2986,7 +2986,7 @@ static int bttv_g_crop(struct file *file, void *f, struct v4l2_crop *crop) return 0; } -static int bttv_s_crop(struct file *file, void *f, struct v4l2_crop *crop) +static int bttv_s_crop(struct file *file, void *f, const struct v4l2_crop *crop) { struct bttv_fh *fh = f; struct bttv *btv = fh->btv; @@ -3028,17 +3028,17 @@ static int bttv_s_crop(struct file *file, void *f, struct v4l2_crop *crop) } /* Min. scaled size 48 x 32. */ - c.rect.left = clamp(crop->c.left, b_left, b_right - 48); + c.rect.left = clamp_t(s32, crop->c.left, b_left, b_right - 48); c.rect.left = min(c.rect.left, (__s32) MAX_HDELAY); - c.rect.width = clamp(crop->c.width, + c.rect.width = clamp_t(s32, crop->c.width, 48, b_right - c.rect.left); - c.rect.top = clamp(crop->c.top, b_top, b_bottom - 32); + c.rect.top = clamp_t(s32, crop->c.top, b_top, b_bottom - 32); /* Top and height must be a multiple of two. */ c.rect.top = (c.rect.top + 1) & ~1; - c.rect.height = clamp(crop->c.height, + c.rect.height = clamp_t(s32, crop->c.height, 32, b_bottom - c.rect.top); c.rect.height = (c.rect.height + 1) & ~1; @@ -3076,7 +3076,7 @@ static int bttv_g_audio(struct file *file, void *priv, struct v4l2_audio *a) return 0; } -static int bttv_s_audio(struct file *file, void *priv, struct v4l2_audio *a) +static int bttv_s_audio(struct file *file, void *priv, const struct v4l2_audio *a) { if (unlikely(a->index)) return -EINVAL; @@ -3480,7 +3480,7 @@ static int radio_s_tuner(struct file *file, void *priv, } static int radio_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) + const struct v4l2_audio *a) { if (unlikely(a->index)) return -EINVAL; diff --git a/drivers/media/video/bt8xx/bttv-gpio.c b/drivers/media/pci/bt8xx/bttv-gpio.c similarity index 100% rename from drivers/media/video/bt8xx/bttv-gpio.c rename to drivers/media/pci/bt8xx/bttv-gpio.c diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/pci/bt8xx/bttv-i2c.c similarity index 100% rename from drivers/media/video/bt8xx/bttv-i2c.c rename to drivers/media/pci/bt8xx/bttv-i2c.c diff --git a/drivers/media/video/bt8xx/bttv-if.c b/drivers/media/pci/bt8xx/bttv-if.c similarity index 100% rename from drivers/media/video/bt8xx/bttv-if.c rename to drivers/media/pci/bt8xx/bttv-if.c diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/pci/bt8xx/bttv-input.c similarity index 100% rename from drivers/media/video/bt8xx/bttv-input.c rename to drivers/media/pci/bt8xx/bttv-input.c diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/pci/bt8xx/bttv-risc.c similarity index 100% rename from drivers/media/video/bt8xx/bttv-risc.c rename to drivers/media/pci/bt8xx/bttv-risc.c diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/pci/bt8xx/bttv-vbi.c similarity index 100% rename from drivers/media/video/bt8xx/bttv-vbi.c rename to drivers/media/pci/bt8xx/bttv-vbi.c diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/pci/bt8xx/bttv.h similarity index 100% rename from drivers/media/video/bt8xx/bttv.h rename to drivers/media/pci/bt8xx/bttv.h diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/pci/bt8xx/bttvp.h similarity index 100% rename from drivers/media/video/bt8xx/bttvp.h rename to drivers/media/pci/bt8xx/bttvp.h diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/pci/bt8xx/dst.c similarity index 100% rename from drivers/media/dvb/bt8xx/dst.c rename to drivers/media/pci/bt8xx/dst.c diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/pci/bt8xx/dst_ca.c similarity index 99% rename from drivers/media/dvb/bt8xx/dst_ca.c rename to drivers/media/pci/bt8xx/dst_ca.c index 66f52f116b607e8b6613c403a3cfec0ee84d07c3..ee3884fbc9ce3e95120e2e421724833629c6cb11 100644 --- a/drivers/media/dvb/bt8xx/dst_ca.c +++ b/drivers/media/pci/bt8xx/dst_ca.c @@ -321,7 +321,8 @@ static int ca_get_message(struct dst_state *state, struct ca_msg *p_ca_message, return -EFAULT; if (p_ca_message->msg) { - dprintk(verbose, DST_CA_NOTICE, 1, " Message = [%02x %02x %02x]", p_ca_message->msg[0], p_ca_message->msg[1], p_ca_message->msg[2]); + dprintk(verbose, DST_CA_NOTICE, 1, " Message = [%*ph]", + 3, p_ca_message->msg); for (i = 0; i < 3; i++) { command = command | p_ca_message->msg[i]; diff --git a/drivers/media/dvb/bt8xx/dst_ca.h b/drivers/media/pci/bt8xx/dst_ca.h similarity index 100% rename from drivers/media/dvb/bt8xx/dst_ca.h rename to drivers/media/pci/bt8xx/dst_ca.h diff --git a/drivers/media/dvb/bt8xx/dst_common.h b/drivers/media/pci/bt8xx/dst_common.h similarity index 100% rename from drivers/media/dvb/bt8xx/dst_common.h rename to drivers/media/pci/bt8xx/dst_common.h diff --git a/drivers/media/dvb/bt8xx/dst_priv.h b/drivers/media/pci/bt8xx/dst_priv.h similarity index 100% rename from drivers/media/dvb/bt8xx/dst_priv.h rename to drivers/media/pci/bt8xx/dst_priv.h diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/pci/bt8xx/dvb-bt8xx.c similarity index 100% rename from drivers/media/dvb/bt8xx/dvb-bt8xx.c rename to drivers/media/pci/bt8xx/dvb-bt8xx.c diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.h b/drivers/media/pci/bt8xx/dvb-bt8xx.h similarity index 100% rename from drivers/media/dvb/bt8xx/dvb-bt8xx.h rename to drivers/media/pci/bt8xx/dvb-bt8xx.h diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/pci/cx18/Kconfig similarity index 68% rename from drivers/media/video/cx18/Kconfig rename to drivers/media/pci/cx18/Kconfig index 53b3c7702573ea66109942a042f8238de815e05e..c675b83c43a96d5e3207c468cc0aba735e5baa44 100644 --- a/drivers/media/video/cx18/Kconfig +++ b/drivers/media/pci/cx18/Kconfig @@ -1,6 +1,6 @@ config VIDEO_CX18 tristate "Conexant cx23418 MPEG encoder support" - depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL + depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C select I2C_ALGOBIT select VIDEOBUF_VMALLOC depends on RC_CORE @@ -8,11 +8,11 @@ config VIDEO_CX18 select VIDEO_TVEEPROM select VIDEO_CX2341X select VIDEO_CS5345 - select DVB_S5H1409 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE - select DVB_S5H1411 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE + select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT ---help--- This is a video4linux driver for Conexant cx23418 based PCI combo video recorder devices. @@ -25,7 +25,7 @@ config VIDEO_CX18 config VIDEO_CX18_ALSA tristate "Conexant 23418 DMA audio support" - depends on VIDEO_CX18 && SND && EXPERIMENTAL + depends on VIDEO_CX18 && SND select SND_PCM ---help--- This is a video4linux driver for direct (DMA) audio on diff --git a/drivers/media/video/cx18/Makefile b/drivers/media/pci/cx18/Makefile similarity index 78% rename from drivers/media/video/cx18/Makefile rename to drivers/media/pci/cx18/Makefile index a86bab5893ef0a3fd86d2357347d7ded1f841cde..d3ff1545c2c5da5c05748e033abd9da64286ee38 100644 --- a/drivers/media/video/cx18/Makefile +++ b/drivers/media/pci/cx18/Makefile @@ -8,6 +8,6 @@ cx18-alsa-objs := cx18-alsa-main.o cx18-alsa-pcm.o obj-$(CONFIG_VIDEO_CX18) += cx18.o obj-$(CONFIG_VIDEO_CX18_ALSA) += cx18-alsa.o -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends -ccflags-y += -Idrivers/media/common/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends +ccflags-y += -Idrivers/media/tuners diff --git a/drivers/media/video/cx18/cx18-alsa-main.c b/drivers/media/pci/cx18/cx18-alsa-main.c similarity index 100% rename from drivers/media/video/cx18/cx18-alsa-main.c rename to drivers/media/pci/cx18/cx18-alsa-main.c diff --git a/drivers/media/video/cx18/cx18-alsa-mixer.c b/drivers/media/pci/cx18/cx18-alsa-mixer.c similarity index 100% rename from drivers/media/video/cx18/cx18-alsa-mixer.c rename to drivers/media/pci/cx18/cx18-alsa-mixer.c diff --git a/drivers/media/video/cx18/cx18-alsa-mixer.h b/drivers/media/pci/cx18/cx18-alsa-mixer.h similarity index 100% rename from drivers/media/video/cx18/cx18-alsa-mixer.h rename to drivers/media/pci/cx18/cx18-alsa-mixer.h diff --git a/drivers/media/video/cx18/cx18-alsa-pcm.c b/drivers/media/pci/cx18/cx18-alsa-pcm.c similarity index 100% rename from drivers/media/video/cx18/cx18-alsa-pcm.c rename to drivers/media/pci/cx18/cx18-alsa-pcm.c diff --git a/drivers/media/video/cx18/cx18-alsa-pcm.h b/drivers/media/pci/cx18/cx18-alsa-pcm.h similarity index 100% rename from drivers/media/video/cx18/cx18-alsa-pcm.h rename to drivers/media/pci/cx18/cx18-alsa-pcm.h diff --git a/drivers/media/video/cx18/cx18-alsa.h b/drivers/media/pci/cx18/cx18-alsa.h similarity index 100% rename from drivers/media/video/cx18/cx18-alsa.h rename to drivers/media/pci/cx18/cx18-alsa.h diff --git a/drivers/media/video/cx18/cx18-audio.c b/drivers/media/pci/cx18/cx18-audio.c similarity index 100% rename from drivers/media/video/cx18/cx18-audio.c rename to drivers/media/pci/cx18/cx18-audio.c diff --git a/drivers/media/video/cx18/cx18-audio.h b/drivers/media/pci/cx18/cx18-audio.h similarity index 100% rename from drivers/media/video/cx18/cx18-audio.h rename to drivers/media/pci/cx18/cx18-audio.h diff --git a/drivers/media/video/cx18/cx18-av-audio.c b/drivers/media/pci/cx18/cx18-av-audio.c similarity index 100% rename from drivers/media/video/cx18/cx18-av-audio.c rename to drivers/media/pci/cx18/cx18-av-audio.c diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/pci/cx18/cx18-av-core.c similarity index 100% rename from drivers/media/video/cx18/cx18-av-core.c rename to drivers/media/pci/cx18/cx18-av-core.c diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/pci/cx18/cx18-av-core.h similarity index 100% rename from drivers/media/video/cx18/cx18-av-core.h rename to drivers/media/pci/cx18/cx18-av-core.h diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/pci/cx18/cx18-av-firmware.c similarity index 99% rename from drivers/media/video/cx18/cx18-av-firmware.c rename to drivers/media/pci/cx18/cx18-av-firmware.c index 280aa4d22488c658a712e8907823ef0e800358ed..a34fd082b76ed8e2216bf0bbe1f1d9a382660f8d 100644 --- a/drivers/media/video/cx18/cx18-av-firmware.c +++ b/drivers/media/pci/cx18/cx18-av-firmware.c @@ -221,3 +221,5 @@ int cx18_av_loadfw(struct cx18 *cx) release_firmware(fw); return 0; } + +MODULE_FIRMWARE(FWFILE); diff --git a/drivers/media/video/cx18/cx18-av-vbi.c b/drivers/media/pci/cx18/cx18-av-vbi.c similarity index 99% rename from drivers/media/video/cx18/cx18-av-vbi.c rename to drivers/media/pci/cx18/cx18-av-vbi.c index baa36fbcd4d4d18c1e1d16906e138fbaaa73fc8e..246982841fece5ac75df67c9beb08604d56f3eba 100644 --- a/drivers/media/video/cx18/cx18-av-vbi.c +++ b/drivers/media/pci/cx18/cx18-av-vbi.c @@ -143,7 +143,9 @@ int cx18_av_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format * int is_pal = !(state->std & V4L2_STD_525_60); int i; - memset(svbi, 0, sizeof(*svbi)); + memset(svbi->service_lines, 0, sizeof(svbi->service_lines)); + svbi->service_set = 0; + /* we're done if raw VBI is active */ if ((cx18_av_read(cx, 0x404) & 0x10) == 0) return 0; diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/pci/cx18/cx18-cards.c similarity index 100% rename from drivers/media/video/cx18/cx18-cards.c rename to drivers/media/pci/cx18/cx18-cards.c diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/pci/cx18/cx18-cards.h similarity index 100% rename from drivers/media/video/cx18/cx18-cards.h rename to drivers/media/pci/cx18/cx18-cards.h diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/pci/cx18/cx18-controls.c similarity index 100% rename from drivers/media/video/cx18/cx18-controls.c rename to drivers/media/pci/cx18/cx18-controls.c diff --git a/drivers/media/video/cx18/cx18-controls.h b/drivers/media/pci/cx18/cx18-controls.h similarity index 100% rename from drivers/media/video/cx18/cx18-controls.h rename to drivers/media/pci/cx18/cx18-controls.h diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/pci/cx18/cx18-driver.c similarity index 99% rename from drivers/media/video/cx18/cx18-driver.c rename to drivers/media/pci/cx18/cx18-driver.c index 7e5ffd6f51786d3390b629b8794b4139aa410551..c67733d32c8a888d61ced937bb6427c38dc830fa 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/pci/cx18/cx18-driver.c @@ -1357,3 +1357,4 @@ static void __exit module_cleanup(void) module_init(module_start); module_exit(module_cleanup); +MODULE_FIRMWARE(XC2028_DEFAULT_FIRMWARE); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/pci/cx18/cx18-driver.h similarity index 100% rename from drivers/media/video/cx18/cx18-driver.h rename to drivers/media/pci/cx18/cx18-driver.h diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/pci/cx18/cx18-dvb.c similarity index 99% rename from drivers/media/video/cx18/cx18-dvb.c rename to drivers/media/pci/cx18/cx18-dvb.c index f41922bd402025118a9e35c8453675ed1ffa62cf..3eac59c51231c0f97b9ae52f1dd8e35f77615427 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/pci/cx18/cx18-dvb.c @@ -40,6 +40,8 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); +#define FWFILE "dvb-cx18-mpc718-mt352.fw" + #define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000 #define CX18_CLOCK_ENABLE2 0xc71024 #define CX18_DMUX_CLK_MASK 0x0080 @@ -135,7 +137,7 @@ static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream, const struct firmware **fw) { struct cx18 *cx = stream->cx; - const char *fn = "dvb-cx18-mpc718-mt352.fw"; + const char *fn = FWFILE; int ret; ret = request_firmware(fw, fn, &cx->pci_dev->dev); @@ -603,3 +605,5 @@ static int dvb_register(struct cx18_stream *stream) return ret; } + +MODULE_FIRMWARE(FWFILE); diff --git a/drivers/media/video/cx18/cx18-dvb.h b/drivers/media/pci/cx18/cx18-dvb.h similarity index 100% rename from drivers/media/video/cx18/cx18-dvb.h rename to drivers/media/pci/cx18/cx18-dvb.h diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/pci/cx18/cx18-fileops.c similarity index 100% rename from drivers/media/video/cx18/cx18-fileops.c rename to drivers/media/pci/cx18/cx18-fileops.c diff --git a/drivers/media/video/cx18/cx18-fileops.h b/drivers/media/pci/cx18/cx18-fileops.h similarity index 100% rename from drivers/media/video/cx18/cx18-fileops.h rename to drivers/media/pci/cx18/cx18-fileops.h diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/pci/cx18/cx18-firmware.c similarity index 98% rename from drivers/media/video/cx18/cx18-firmware.c rename to drivers/media/pci/cx18/cx18-firmware.c index b85c292a849ac2debe36c828e506254cd65214a7..a1c1cec05f98e4693bdc3dacfa073a64adec1d32 100644 --- a/drivers/media/video/cx18/cx18-firmware.c +++ b/drivers/media/pci/cx18/cx18-firmware.c @@ -376,6 +376,9 @@ void cx18_init_memory(struct cx18 *cx) cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT14); /* AVO */ } +#define CX18_CPU_FIRMWARE "v4l-cx23418-cpu.fw" +#define CX18_APU_FIRMWARE "v4l-cx23418-apu.fw" + int cx18_firmware_init(struct cx18 *cx) { u32 fw_entry_addr; @@ -400,7 +403,7 @@ int cx18_firmware_init(struct cx18 *cx) cx18_sw1_irq_enable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); cx18_sw2_irq_enable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); - sz = load_cpu_fw_direct("v4l-cx23418-cpu.fw", cx->enc_mem, cx); + sz = load_cpu_fw_direct(CX18_CPU_FIRMWARE, cx->enc_mem, cx); if (sz <= 0) return sz; @@ -408,7 +411,7 @@ int cx18_firmware_init(struct cx18 *cx) cx18_init_scb(cx); fw_entry_addr = 0; - sz = load_apu_fw_direct("v4l-cx23418-apu.fw", cx->enc_mem, cx, + sz = load_apu_fw_direct(CX18_APU_FIRMWARE, cx->enc_mem, cx, &fw_entry_addr); if (sz <= 0) return sz; @@ -451,3 +454,6 @@ int cx18_firmware_init(struct cx18 *cx) cx18_write_reg_expect(cx, 0x14001400, 0xc78110, 0x00001400, 0x14001400); return 0; } + +MODULE_FIRMWARE(CX18_CPU_FIRMWARE); +MODULE_FIRMWARE(CX18_APU_FIRMWARE); diff --git a/drivers/media/video/cx18/cx18-firmware.h b/drivers/media/pci/cx18/cx18-firmware.h similarity index 100% rename from drivers/media/video/cx18/cx18-firmware.h rename to drivers/media/pci/cx18/cx18-firmware.h diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/pci/cx18/cx18-gpio.c similarity index 100% rename from drivers/media/video/cx18/cx18-gpio.c rename to drivers/media/pci/cx18/cx18-gpio.c diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/pci/cx18/cx18-gpio.h similarity index 100% rename from drivers/media/video/cx18/cx18-gpio.h rename to drivers/media/pci/cx18/cx18-gpio.h diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/pci/cx18/cx18-i2c.c similarity index 100% rename from drivers/media/video/cx18/cx18-i2c.c rename to drivers/media/pci/cx18/cx18-i2c.c diff --git a/drivers/media/video/cx18/cx18-i2c.h b/drivers/media/pci/cx18/cx18-i2c.h similarity index 100% rename from drivers/media/video/cx18/cx18-i2c.h rename to drivers/media/pci/cx18/cx18-i2c.h diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/pci/cx18/cx18-io.c similarity index 100% rename from drivers/media/video/cx18/cx18-io.c rename to drivers/media/pci/cx18/cx18-io.c diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/pci/cx18/cx18-io.h similarity index 100% rename from drivers/media/video/cx18/cx18-io.h rename to drivers/media/pci/cx18/cx18-io.h diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/pci/cx18/cx18-ioctl.c similarity index 99% rename from drivers/media/video/cx18/cx18-ioctl.c rename to drivers/media/pci/cx18/cx18-ioctl.c index e9912db3b496ae69618b411896fe054ba35d4827..cd8d2c2b16246e667e8e78053558cd7c30f6261d 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/pci/cx18/cx18-ioctl.c @@ -210,10 +210,6 @@ static int cx18_g_fmt_sliced_vbi_cap(struct file *file, void *fh, if (v4l2_subdev_call(cx->sd_av, vbi, g_sliced_fmt, &fmt->fmt.sliced)) return -EINVAL; - /* Ensure V4L2 spec compliant output */ - vbifmt->reserved[0] = 0; - vbifmt->reserved[1] = 0; - vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; vbifmt->service_set = cx18_get_service_set(vbifmt); return 0; } @@ -492,7 +488,7 @@ static int cx18_g_audio(struct file *file, void *fh, struct v4l2_audio *vin) return cx18_get_audio_input(cx, vin->index, vin); } -static int cx18_s_audio(struct file *file, void *fh, struct v4l2_audio *vout) +static int cx18_s_audio(struct file *file, void *fh, const struct v4l2_audio *vout) { struct cx18 *cx = fh2id(fh)->cx; @@ -527,7 +523,7 @@ static int cx18_cropcap(struct file *file, void *fh, return 0; } -static int cx18_s_crop(struct file *file, void *fh, struct v4l2_crop *crop) +static int cx18_s_crop(struct file *file, void *fh, const struct v4l2_crop *crop) { struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; diff --git a/drivers/media/video/cx18/cx18-ioctl.h b/drivers/media/pci/cx18/cx18-ioctl.h similarity index 100% rename from drivers/media/video/cx18/cx18-ioctl.h rename to drivers/media/pci/cx18/cx18-ioctl.h diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/pci/cx18/cx18-irq.c similarity index 100% rename from drivers/media/video/cx18/cx18-irq.c rename to drivers/media/pci/cx18/cx18-irq.c diff --git a/drivers/media/video/cx18/cx18-irq.h b/drivers/media/pci/cx18/cx18-irq.h similarity index 100% rename from drivers/media/video/cx18/cx18-irq.h rename to drivers/media/pci/cx18/cx18-irq.h diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/pci/cx18/cx18-mailbox.c similarity index 100% rename from drivers/media/video/cx18/cx18-mailbox.c rename to drivers/media/pci/cx18/cx18-mailbox.c diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/pci/cx18/cx18-mailbox.h similarity index 100% rename from drivers/media/video/cx18/cx18-mailbox.h rename to drivers/media/pci/cx18/cx18-mailbox.h diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/pci/cx18/cx18-queue.c similarity index 100% rename from drivers/media/video/cx18/cx18-queue.c rename to drivers/media/pci/cx18/cx18-queue.c diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/pci/cx18/cx18-queue.h similarity index 100% rename from drivers/media/video/cx18/cx18-queue.h rename to drivers/media/pci/cx18/cx18-queue.h diff --git a/drivers/media/video/cx18/cx18-scb.c b/drivers/media/pci/cx18/cx18-scb.c similarity index 100% rename from drivers/media/video/cx18/cx18-scb.c rename to drivers/media/pci/cx18/cx18-scb.c diff --git a/drivers/media/video/cx18/cx18-scb.h b/drivers/media/pci/cx18/cx18-scb.h similarity index 100% rename from drivers/media/video/cx18/cx18-scb.h rename to drivers/media/pci/cx18/cx18-scb.h diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c similarity index 98% rename from drivers/media/video/cx18/cx18-streams.c rename to drivers/media/pci/cx18/cx18-streams.c index 9d598ab88615c07a82103010e6cb9c5a1e19600d..72af9b5c2d7dd2fcc2f37c27d568f4292a7b30ec 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/pci/cx18/cx18-streams.c @@ -58,42 +58,41 @@ static struct { int vfl_type; int num_offset; int dma; - enum v4l2_buf_type buf_type; } cx18_stream_info[] = { { /* CX18_ENC_STREAM_TYPE_MPG */ "encoder MPEG", VFL_TYPE_GRABBER, 0, - PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE, + PCI_DMA_FROMDEVICE, }, { /* CX18_ENC_STREAM_TYPE_TS */ "TS", VFL_TYPE_GRABBER, -1, - PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE, + PCI_DMA_FROMDEVICE, }, { /* CX18_ENC_STREAM_TYPE_YUV */ "encoder YUV", VFL_TYPE_GRABBER, CX18_V4L2_ENC_YUV_OFFSET, - PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE, + PCI_DMA_FROMDEVICE, }, { /* CX18_ENC_STREAM_TYPE_VBI */ "encoder VBI", VFL_TYPE_VBI, 0, - PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VBI_CAPTURE, + PCI_DMA_FROMDEVICE, }, { /* CX18_ENC_STREAM_TYPE_PCM */ "encoder PCM audio", VFL_TYPE_GRABBER, CX18_V4L2_ENC_PCM_OFFSET, - PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_PRIVATE, + PCI_DMA_FROMDEVICE, }, { /* CX18_ENC_STREAM_TYPE_IDX */ "encoder IDX", VFL_TYPE_GRABBER, -1, - PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE, + PCI_DMA_FROMDEVICE, }, { /* CX18_ENC_STREAM_TYPE_RAD */ "encoder radio", VFL_TYPE_RADIO, 0, - PCI_DMA_NONE, V4L2_BUF_TYPE_PRIVATE, + PCI_DMA_NONE, }, }; diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/pci/cx18/cx18-streams.h similarity index 100% rename from drivers/media/video/cx18/cx18-streams.h rename to drivers/media/pci/cx18/cx18-streams.h diff --git a/drivers/media/video/cx18/cx18-vbi.c b/drivers/media/pci/cx18/cx18-vbi.c similarity index 100% rename from drivers/media/video/cx18/cx18-vbi.c rename to drivers/media/pci/cx18/cx18-vbi.c diff --git a/drivers/media/video/cx18/cx18-vbi.h b/drivers/media/pci/cx18/cx18-vbi.h similarity index 100% rename from drivers/media/video/cx18/cx18-vbi.h rename to drivers/media/pci/cx18/cx18-vbi.h diff --git a/drivers/media/video/cx18/cx18-version.h b/drivers/media/pci/cx18/cx18-version.h similarity index 100% rename from drivers/media/video/cx18/cx18-version.h rename to drivers/media/pci/cx18/cx18-version.h diff --git a/drivers/media/video/cx18/cx18-video.c b/drivers/media/pci/cx18/cx18-video.c similarity index 100% rename from drivers/media/video/cx18/cx18-video.c rename to drivers/media/pci/cx18/cx18-video.c diff --git a/drivers/media/video/cx18/cx18-video.h b/drivers/media/pci/cx18/cx18-video.h similarity index 100% rename from drivers/media/video/cx18/cx18-video.h rename to drivers/media/pci/cx18/cx18-video.h diff --git a/drivers/media/video/cx18/cx23418.h b/drivers/media/pci/cx18/cx23418.h similarity index 100% rename from drivers/media/video/cx18/cx23418.h rename to drivers/media/pci/cx18/cx23418.h diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..eafa1144b17dd34752703746c44ae457884db197 --- /dev/null +++ b/drivers/media/pci/cx23885/Kconfig @@ -0,0 +1,50 @@ +config VIDEO_CX23885 + tristate "Conexant cx23885 (2388x successor) support" + depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT && SND + select SND_PCM + select I2C_ALGOBIT + select VIDEO_BTCX + select VIDEO_TUNER + select VIDEO_TVEEPROM + depends on RC_CORE + select VIDEOBUF_DVB + select VIDEOBUF_DMA_SG + select VIDEO_CX25840 + select VIDEO_CX2341X + select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT + select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT + select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + This is a video4linux driver for Conexant 23885 based + TV cards. + + To compile this driver as a module, choose M here: the + module will be called cx23885 + +config MEDIA_ALTERA_CI + tristate "Altera FPGA based CI module" + depends on VIDEO_CX23885 && DVB_CORE + select ALTERA_STAPL + ---help--- + An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card. + + To compile this driver as a module, choose M here: the + module will be called altera-ci diff --git a/drivers/media/video/cx23885/Makefile b/drivers/media/pci/cx23885/Makefile similarity index 72% rename from drivers/media/video/cx23885/Makefile rename to drivers/media/pci/cx23885/Makefile index f81f2796a0f9e45fc0bb717bed3d79e2525e48ba..a2cbdcf15a8c48fde4cd79c43b33dd92c81a8def 100644 --- a/drivers/media/video/cx23885/Makefile +++ b/drivers/media/pci/cx23885/Makefile @@ -7,9 +7,9 @@ cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o \ obj-$(CONFIG_VIDEO_CX23885) += cx23885.o obj-$(CONFIG_MEDIA_ALTERA_CI) += altera-ci.o -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends ccflags-y += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/video/cx23885/altera-ci.c b/drivers/media/pci/cx23885/altera-ci.c similarity index 99% rename from drivers/media/video/cx23885/altera-ci.c rename to drivers/media/pci/cx23885/altera-ci.c index 1fa8927f0d36eecb3946b7c7c48467eb3d540640..aee7f0dacff11a8a61764c274559bf5454909fad 100644 --- a/drivers/media/video/cx23885/altera-ci.c +++ b/drivers/media/pci/cx23885/altera-ci.c @@ -724,6 +724,7 @@ int altera_ci_init(struct altera_ci_config *config, int ci_nr) if (temp_int != NULL) { inter = temp_int->internal; (inter->cis_used)++; + inter->fpga_rw = config->fpga_rw; ci_dbg_print("%s: Find Internal Structure!\n", __func__); } else { inter = kzalloc(sizeof(struct fpga_internal), GFP_KERNEL); @@ -743,7 +744,6 @@ int altera_ci_init(struct altera_ci_config *config, int ci_nr) ci_dbg_print("%s: setting state = %p for ci = %d\n", __func__, state, ci_nr - 1); - inter->state[ci_nr - 1] = state; state->internal = inter; state->nr = ci_nr - 1; @@ -765,6 +765,8 @@ int altera_ci_init(struct altera_ci_config *config, int ci_nr) if (0 != ret) goto err; + inter->state[ci_nr - 1] = state; + altera_hw_filt_init(config, ci_nr); if (inter->strt_wrk) { diff --git a/drivers/media/video/cx23885/altera-ci.h b/drivers/media/pci/cx23885/altera-ci.h similarity index 100% rename from drivers/media/video/cx23885/altera-ci.h rename to drivers/media/pci/cx23885/altera-ci.h diff --git a/drivers/media/video/cx23885/cimax2.c b/drivers/media/pci/cx23885/cimax2.c similarity index 100% rename from drivers/media/video/cx23885/cimax2.c rename to drivers/media/pci/cx23885/cimax2.c diff --git a/drivers/media/video/cx23885/cimax2.h b/drivers/media/pci/cx23885/cimax2.h similarity index 100% rename from drivers/media/video/cx23885/cimax2.h rename to drivers/media/pci/cx23885/cimax2.h diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/pci/cx23885/cx23885-417.c similarity index 99% rename from drivers/media/video/cx23885/cx23885-417.c rename to drivers/media/pci/cx23885/cx23885-417.c index f5c79e53e5a145bce2fc8a0f898ca7482d2ab0e6..5d5052d0253f00808d5960d46b388b20b6c0bf98 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/pci/cx23885/cx23885-417.c @@ -1786,3 +1786,5 @@ int cx23885_417_register(struct cx23885_dev *dev) return 0; } + +MODULE_FIRMWARE(CX23885_FIRM_IMAGE_NAME); diff --git a/drivers/media/video/cx23885/cx23885-alsa.c b/drivers/media/pci/cx23885/cx23885-alsa.c similarity index 100% rename from drivers/media/video/cx23885/cx23885-alsa.c rename to drivers/media/pci/cx23885/cx23885-alsa.c diff --git a/drivers/media/video/cx23885/cx23885-av.c b/drivers/media/pci/cx23885/cx23885-av.c similarity index 100% rename from drivers/media/video/cx23885/cx23885-av.c rename to drivers/media/pci/cx23885/cx23885-av.c diff --git a/drivers/media/video/cx23885/cx23885-av.h b/drivers/media/pci/cx23885/cx23885-av.h similarity index 100% rename from drivers/media/video/cx23885/cx23885-av.h rename to drivers/media/pci/cx23885/cx23885-av.h diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c similarity index 98% rename from drivers/media/video/cx23885/cx23885-cards.c rename to drivers/media/pci/cx23885/cx23885-cards.c index 080e11157e5fe89afdb384c702376d80528daf5d..39a4a4b9ed7e893d97fe3460dcef33dc663de5b8 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -36,7 +36,7 @@ #include "xc5000.h" #include "cx23888-ir.h" -static unsigned int netup_card_rev = 1; +static unsigned int netup_card_rev = 4; module_param(netup_card_rev, int, 0644); MODULE_PARM_DESC(netup_card_rev, "NetUP Dual DVB-T/C CI card revision"); @@ -46,6 +46,7 @@ MODULE_PARM_DESC(enable_885_ir, "Enable integrated IR controller for supported\n" "\t\t CX2388[57] boards that are wired for it:\n" "\t\t\tHVR-1250 (reported safe)\n" + "\t\t\tTerraTec Cinergy T PCIe Dual (not well tested, appears to be safe)\n" "\t\t\tTeVii S470 (reported unsafe)\n" "\t\t This can cause an interrupt storm with some cards.\n" "\t\t Default: 0 [Disabled]"); @@ -564,6 +565,10 @@ struct cx23885_board cx23885_boards[] = { [CX23885_BOARD_TEVII_S471] = { .name = "TeVii S471", .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_PROF_8000] = { + .name = "Prof Revolution DVB-S2 8000", + .portb = CX23885_MPEG_DVB, } }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -776,6 +781,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0xd471, .subdevice = 0x9022, .card = CX23885_BOARD_TEVII_S471, + }, { + .subvendor = 0x8000, + .subdevice = 0x3034, + .card = CX23885_BOARD_PROF_8000, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -1155,6 +1164,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx_set(GP0_IO, 0x00040004); break; case CX23885_BOARD_TBS_6920: + case CX23885_BOARD_PROF_8000: cx_write(MC417_CTL, 0x00000036); cx_write(MC417_OEN, 0x00001000); cx_set(MC417_RWD, 0x00000002); @@ -1363,6 +1373,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) params.shutdown = true; v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms); break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: case CX23885_BOARD_TEVII_S470: if (!enable_885_ir) break; @@ -1403,6 +1414,7 @@ void cx23885_ir_fini(struct cx23885_dev *dev) cx23888_ir_remove(dev); dev->sd_ir = NULL; break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: case CX23885_BOARD_TEVII_S470: case CX23885_BOARD_HAUPPAUGE_HVR1250: cx23885_irq_remove(dev, PCI_MSK_AV_CORE); @@ -1446,6 +1458,7 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev) if (dev->sd_ir) cx23885_irq_add_enable(dev, PCI_MSK_IR); break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: case CX23885_BOARD_TEVII_S470: case CX23885_BOARD_HAUPPAUGE_HVR1250: if (dev->sd_ir) @@ -1536,6 +1549,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_TEVII_S470: case CX23885_BOARD_TEVII_S471: case CX23885_BOARD_DVBWORLD_2005: + case CX23885_BOARD_PROF_8000: ts1->gen_ctrl_val = 0x5; /* Parallel */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c similarity index 100% rename from drivers/media/video/cx23885/cx23885-core.c rename to drivers/media/pci/cx23885/cx23885-core.c diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c similarity index 95% rename from drivers/media/video/cx23885/cx23885-dvb.c rename to drivers/media/pci/cx23885/cx23885-dvb.c index cd542684ba022c4f194928e37cfc318d6a1b0b79..4379d8a6dad5f6d4f8376f7d3d1f4dc68bc97b59 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -63,6 +63,9 @@ #include "stv0367.h" #include "drxk.h" #include "mt2063.h" +#include "stv090x.h" +#include "stb6100.h" +#include "stb6100_cfg.h" static unsigned int debug; @@ -489,6 +492,42 @@ static struct xc5000_config mygica_x8506_xc5000_config = { .if_khz = 5380, }; +static struct stv090x_config prof_8000_stv090x_config = { + .device = STV0903, + .demod_mode = STV090x_SINGLE, + .clk_mode = STV090x_CLK_EXT, + .xtal = 27000000, + .address = 0x6A, + .ts1_mode = STV090x_TSMODE_PARALLEL_PUNCTURED, + .repeater_level = STV090x_RPTLEVEL_64, + .adc1_range = STV090x_ADC_2Vpp, + .diseqc_envelope_mode = false, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, +}; + +static struct stb6100_config prof_8000_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static int p8000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + if (voltage == SEC_VOLTAGE_18) + cx_write(MC417_RWD, 0x00001e00); + else if (voltage == SEC_VOLTAGE_13) + cx_write(MC417_RWD, 0x00001a00); + else + cx_write(MC417_RWD, 0x00001800); + return 0; +} + static int cx23885_dvb_set_frontend(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; @@ -1186,6 +1225,23 @@ static int dvb_register(struct cx23885_tsport *port) &tevii_ds3000_config, &i2c_bus->i2c_adap); break; + case CX23885_BOARD_PROF_8000: + i2c_bus = &dev->i2c_bus[0]; + + fe0->dvb.frontend = dvb_attach(stv090x_attach, + &prof_8000_stv090x_config, + &i2c_bus->i2c_adap, + STV090x_DEMODULATOR_0); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(stb6100_attach, + fe0->dvb.frontend, + &prof_8000_stb6100_config, + &i2c_bus->i2c_adap)) + goto frontend_detach; + + fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage; + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", @@ -1218,8 +1274,7 @@ static int dvb_register(struct cx23885_tsport *port) /* register everything */ ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port, - &dev->pci->dev, adapter_nr, mfe_shared, - NULL); + &dev->pci->dev, adapter_nr, mfe_shared); if (ret) goto frontend_detach; diff --git a/drivers/media/video/cx23885/cx23885-f300.c b/drivers/media/pci/cx23885/cx23885-f300.c similarity index 100% rename from drivers/media/video/cx23885/cx23885-f300.c rename to drivers/media/pci/cx23885/cx23885-f300.c diff --git a/drivers/media/video/cx23885/cx23885-f300.h b/drivers/media/pci/cx23885/cx23885-f300.h similarity index 100% rename from drivers/media/video/cx23885/cx23885-f300.h rename to drivers/media/pci/cx23885/cx23885-f300.h diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/pci/cx23885/cx23885-i2c.c similarity index 100% rename from drivers/media/video/cx23885/cx23885-i2c.c rename to drivers/media/pci/cx23885/cx23885-i2c.c diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c similarity index 96% rename from drivers/media/video/cx23885/cx23885-input.c rename to drivers/media/pci/cx23885/cx23885-input.c index ce765e3f77bdf6b679ba1b56900035f4f38d51c2..56066721edc17423726188858aa66e4ea017ff0b 100644 --- a/drivers/media/video/cx23885/cx23885-input.c +++ b/drivers/media/pci/cx23885/cx23885-input.c @@ -85,6 +85,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events) case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: case CX23885_BOARD_TEVII_S470: case CX23885_BOARD_HAUPPAUGE_HVR1250: /* @@ -162,6 +163,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev) */ params.invert_level = true; break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: case CX23885_BOARD_TEVII_S470: /* * The IR controller on this board only returns pulse widths. @@ -272,6 +274,13 @@ int cx23885_input_init(struct cx23885_dev *dev) /* The grey Hauppauge RC-5 remote */ rc_map = RC_MAP_HAUPPAUGE; break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + /* Integrated CX23885 IR controller */ + driver_type = RC_DRIVER_IR_RAW; + allowed_protos = RC_TYPE_NEC; + /* The grey Terratec remote with orange buttons */ + rc_map = RC_MAP_NEC_TERRATEC_CINERGY_XS; + break; case CX23885_BOARD_TEVII_S470: /* Integrated CX23885 IR controller */ driver_type = RC_DRIVER_IR_RAW; diff --git a/drivers/media/video/cx23885/cx23885-input.h b/drivers/media/pci/cx23885/cx23885-input.h similarity index 100% rename from drivers/media/video/cx23885/cx23885-input.h rename to drivers/media/pci/cx23885/cx23885-input.h diff --git a/drivers/media/video/cx23885/cx23885-ioctl.c b/drivers/media/pci/cx23885/cx23885-ioctl.c similarity index 100% rename from drivers/media/video/cx23885/cx23885-ioctl.c rename to drivers/media/pci/cx23885/cx23885-ioctl.c diff --git a/drivers/media/video/cx23885/cx23885-ioctl.h b/drivers/media/pci/cx23885/cx23885-ioctl.h similarity index 100% rename from drivers/media/video/cx23885/cx23885-ioctl.h rename to drivers/media/pci/cx23885/cx23885-ioctl.h diff --git a/drivers/media/video/cx23885/cx23885-ir.c b/drivers/media/pci/cx23885/cx23885-ir.c similarity index 100% rename from drivers/media/video/cx23885/cx23885-ir.c rename to drivers/media/pci/cx23885/cx23885-ir.c diff --git a/drivers/media/video/cx23885/cx23885-ir.h b/drivers/media/pci/cx23885/cx23885-ir.h similarity index 100% rename from drivers/media/video/cx23885/cx23885-ir.h rename to drivers/media/pci/cx23885/cx23885-ir.h diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/pci/cx23885/cx23885-reg.h similarity index 100% rename from drivers/media/video/cx23885/cx23885-reg.h rename to drivers/media/pci/cx23885/cx23885-reg.h diff --git a/drivers/media/video/cx23885/cx23885-vbi.c b/drivers/media/pci/cx23885/cx23885-vbi.c similarity index 100% rename from drivers/media/video/cx23885/cx23885-vbi.c rename to drivers/media/pci/cx23885/cx23885-vbi.c diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c similarity index 99% rename from drivers/media/video/cx23885/cx23885-video.c rename to drivers/media/pci/cx23885/cx23885-video.c index 22f8e7fbd6656fe81f33f824832a38cc7e2dd14c..8c4a9a5f9a504ff2959df17d189ab148644f6a03 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/pci/cx23885/cx23885-video.c @@ -1426,7 +1426,7 @@ static int vidioc_g_audinput(struct file *file, void *priv, } static int vidioc_s_audinput(struct file *file, void *priv, - struct v4l2_audio *i) + const struct v4l2_audio *i) { struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; if (i->index >= 2) diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h similarity index 99% rename from drivers/media/video/cx23885/cx23885.h rename to drivers/media/pci/cx23885/cx23885.h index 5d560c747e09346d7f90b70b6eccb24a6c949ea1..67f40d31450be7e81d79fd24526e5436d7bb336a 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/pci/cx23885/cx23885.h @@ -90,6 +90,7 @@ #define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34 #define CX23885_BOARD_TEVII_S471 35 #define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36 +#define CX23885_BOARD_PROF_8000 37 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/pci/cx23885/cx23888-ir.c similarity index 100% rename from drivers/media/video/cx23885/cx23888-ir.c rename to drivers/media/pci/cx23885/cx23888-ir.c diff --git a/drivers/media/video/cx23885/cx23888-ir.h b/drivers/media/pci/cx23885/cx23888-ir.h similarity index 100% rename from drivers/media/video/cx23885/cx23888-ir.h rename to drivers/media/pci/cx23885/cx23888-ir.h diff --git a/drivers/media/video/cx23885/netup-eeprom.c b/drivers/media/pci/cx23885/netup-eeprom.c similarity index 100% rename from drivers/media/video/cx23885/netup-eeprom.c rename to drivers/media/pci/cx23885/netup-eeprom.c diff --git a/drivers/media/video/cx23885/netup-eeprom.h b/drivers/media/pci/cx23885/netup-eeprom.h similarity index 100% rename from drivers/media/video/cx23885/netup-eeprom.h rename to drivers/media/pci/cx23885/netup-eeprom.h diff --git a/drivers/media/video/cx23885/netup-init.c b/drivers/media/pci/cx23885/netup-init.c similarity index 100% rename from drivers/media/video/cx23885/netup-init.c rename to drivers/media/pci/cx23885/netup-init.c diff --git a/drivers/media/video/cx23885/netup-init.h b/drivers/media/pci/cx23885/netup-init.h similarity index 100% rename from drivers/media/video/cx23885/netup-init.h rename to drivers/media/pci/cx23885/netup-init.h diff --git a/drivers/media/video/cx25821/Kconfig b/drivers/media/pci/cx25821/Kconfig similarity index 100% rename from drivers/media/video/cx25821/Kconfig rename to drivers/media/pci/cx25821/Kconfig diff --git a/drivers/media/video/cx25821/Makefile b/drivers/media/pci/cx25821/Makefile similarity index 67% rename from drivers/media/video/cx25821/Makefile rename to drivers/media/pci/cx25821/Makefile index aedde18c68f96f68e377e43eb2d3d2824c7b213c..5bf3ea4c1556a642d11dc7709faf8cb64a6a0b9e 100644 --- a/drivers/media/video/cx25821/Makefile +++ b/drivers/media/pci/cx25821/Makefile @@ -7,7 +7,7 @@ cx25821-y := cx25821-core.o cx25821-cards.o cx25821-i2c.o \ obj-$(CONFIG_VIDEO_CX25821) += cx25821.o obj-$(CONFIG_VIDEO_CX25821_ALSA) += cx25821-alsa.o -ccflags-y := -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends diff --git a/drivers/media/video/cx25821/cx25821-alsa.c b/drivers/media/pci/cx25821/cx25821-alsa.c similarity index 100% rename from drivers/media/video/cx25821/cx25821-alsa.c rename to drivers/media/pci/cx25821/cx25821-alsa.c diff --git a/drivers/media/video/cx25821/cx25821-audio-upstream.c b/drivers/media/pci/cx25821/cx25821-audio-upstream.c similarity index 100% rename from drivers/media/video/cx25821/cx25821-audio-upstream.c rename to drivers/media/pci/cx25821/cx25821-audio-upstream.c diff --git a/drivers/media/video/cx25821/cx25821-audio-upstream.h b/drivers/media/pci/cx25821/cx25821-audio-upstream.h similarity index 100% rename from drivers/media/video/cx25821/cx25821-audio-upstream.h rename to drivers/media/pci/cx25821/cx25821-audio-upstream.h diff --git a/drivers/media/video/cx25821/cx25821-audio.h b/drivers/media/pci/cx25821/cx25821-audio.h similarity index 100% rename from drivers/media/video/cx25821/cx25821-audio.h rename to drivers/media/pci/cx25821/cx25821-audio.h diff --git a/drivers/media/video/cx25821/cx25821-biffuncs.h b/drivers/media/pci/cx25821/cx25821-biffuncs.h similarity index 100% rename from drivers/media/video/cx25821/cx25821-biffuncs.h rename to drivers/media/pci/cx25821/cx25821-biffuncs.h diff --git a/drivers/media/video/cx25821/cx25821-cards.c b/drivers/media/pci/cx25821/cx25821-cards.c similarity index 100% rename from drivers/media/video/cx25821/cx25821-cards.c rename to drivers/media/pci/cx25821/cx25821-cards.c diff --git a/drivers/media/video/cx25821/cx25821-core.c b/drivers/media/pci/cx25821/cx25821-core.c similarity index 100% rename from drivers/media/video/cx25821/cx25821-core.c rename to drivers/media/pci/cx25821/cx25821-core.c diff --git a/drivers/media/video/cx25821/cx25821-gpio.c b/drivers/media/pci/cx25821/cx25821-gpio.c similarity index 100% rename from drivers/media/video/cx25821/cx25821-gpio.c rename to drivers/media/pci/cx25821/cx25821-gpio.c diff --git a/drivers/media/video/cx25821/cx25821-i2c.c b/drivers/media/pci/cx25821/cx25821-i2c.c similarity index 100% rename from drivers/media/video/cx25821/cx25821-i2c.c rename to drivers/media/pci/cx25821/cx25821-i2c.c diff --git a/drivers/media/video/cx25821/cx25821-medusa-defines.h b/drivers/media/pci/cx25821/cx25821-medusa-defines.h similarity index 100% rename from drivers/media/video/cx25821/cx25821-medusa-defines.h rename to drivers/media/pci/cx25821/cx25821-medusa-defines.h diff --git a/drivers/media/video/cx25821/cx25821-medusa-reg.h b/drivers/media/pci/cx25821/cx25821-medusa-reg.h similarity index 100% rename from drivers/media/video/cx25821/cx25821-medusa-reg.h rename to drivers/media/pci/cx25821/cx25821-medusa-reg.h diff --git a/drivers/media/video/cx25821/cx25821-medusa-video.c b/drivers/media/pci/cx25821/cx25821-medusa-video.c similarity index 100% rename from drivers/media/video/cx25821/cx25821-medusa-video.c rename to drivers/media/pci/cx25821/cx25821-medusa-video.c diff --git a/drivers/media/video/cx25821/cx25821-medusa-video.h b/drivers/media/pci/cx25821/cx25821-medusa-video.h similarity index 100% rename from drivers/media/video/cx25821/cx25821-medusa-video.h rename to drivers/media/pci/cx25821/cx25821-medusa-video.h diff --git a/drivers/media/video/cx25821/cx25821-reg.h b/drivers/media/pci/cx25821/cx25821-reg.h similarity index 100% rename from drivers/media/video/cx25821/cx25821-reg.h rename to drivers/media/pci/cx25821/cx25821-reg.h diff --git a/drivers/media/video/cx25821/cx25821-sram.h b/drivers/media/pci/cx25821/cx25821-sram.h similarity index 100% rename from drivers/media/video/cx25821/cx25821-sram.h rename to drivers/media/pci/cx25821/cx25821-sram.h diff --git a/drivers/media/video/cx25821/cx25821-video-upstream-ch2.c b/drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c similarity index 100% rename from drivers/media/video/cx25821/cx25821-video-upstream-ch2.c rename to drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c diff --git a/drivers/media/video/cx25821/cx25821-video-upstream-ch2.h b/drivers/media/pci/cx25821/cx25821-video-upstream-ch2.h similarity index 100% rename from drivers/media/video/cx25821/cx25821-video-upstream-ch2.h rename to drivers/media/pci/cx25821/cx25821-video-upstream-ch2.h diff --git a/drivers/media/video/cx25821/cx25821-video-upstream.c b/drivers/media/pci/cx25821/cx25821-video-upstream.c similarity index 100% rename from drivers/media/video/cx25821/cx25821-video-upstream.c rename to drivers/media/pci/cx25821/cx25821-video-upstream.c diff --git a/drivers/media/video/cx25821/cx25821-video-upstream.h b/drivers/media/pci/cx25821/cx25821-video-upstream.h similarity index 100% rename from drivers/media/video/cx25821/cx25821-video-upstream.h rename to drivers/media/pci/cx25821/cx25821-video-upstream.h diff --git a/drivers/media/video/cx25821/cx25821-video.c b/drivers/media/pci/cx25821/cx25821-video.c similarity index 99% rename from drivers/media/video/cx25821/cx25821-video.c rename to drivers/media/pci/cx25821/cx25821-video.c index b38d4379cc362b954e4f20db989ca5b5aa2501ea..0a80245165d0d8d6e51f876494c1f886893dd43f 100644 --- a/drivers/media/video/cx25821/cx25821-video.c +++ b/drivers/media/pci/cx25821/cx25821-video.c @@ -1610,7 +1610,7 @@ int cx25821_vidioc_cropcap(struct file *file, void *priv, return 0; } -int cx25821_vidioc_s_crop(struct file *file, void *priv, struct v4l2_crop *crop) +int cx25821_vidioc_s_crop(struct file *file, void *priv, const struct v4l2_crop *crop) { struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev; struct cx25821_fh *fh = priv; diff --git a/drivers/media/video/cx25821/cx25821-video.h b/drivers/media/pci/cx25821/cx25821-video.h similarity index 99% rename from drivers/media/video/cx25821/cx25821-video.h rename to drivers/media/pci/cx25821/cx25821-video.h index 9652a5e35ba23e1b2dff9e4704db03f93cd563e3..c265e35b37c3e54a9ddbe0b57f0fb31e3fda8d89 100644 --- a/drivers/media/video/cx25821/cx25821-video.h +++ b/drivers/media/pci/cx25821/cx25821-video.h @@ -177,7 +177,7 @@ extern int cx25821_set_control(struct cx25821_dev *dev, extern int cx25821_vidioc_cropcap(struct file *file, void *fh, struct v4l2_cropcap *cropcap); extern int cx25821_vidioc_s_crop(struct file *file, void *priv, - struct v4l2_crop *crop); + const struct v4l2_crop *crop); extern int cx25821_vidioc_g_crop(struct file *file, void *priv, struct v4l2_crop *crop); diff --git a/drivers/media/video/cx25821/cx25821.h b/drivers/media/pci/cx25821/cx25821.h similarity index 100% rename from drivers/media/video/cx25821/cx25821.h rename to drivers/media/pci/cx25821/cx25821.h diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/pci/cx88/Kconfig similarity index 70% rename from drivers/media/video/cx88/Kconfig rename to drivers/media/pci/cx88/Kconfig index 3598dc087b0880fd5214f8f96b36b377678b1a00..d27fccbf03c441055859eb84a503803d4f265ba5 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/pci/cx88/Kconfig @@ -6,7 +6,7 @@ config VIDEO_CX88 select VIDEOBUF_DMA_SG select VIDEO_TUNER select VIDEO_TVEEPROM - select VIDEO_WM8775 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_WM8775 if MEDIA_SUBDRV_AUTOSELECT ---help--- This is a video4linux driver for Conexant 2388x based TV cards. @@ -46,23 +46,23 @@ config VIDEO_CX88_DVB tristate "DVB/ATSC Support for cx2388x based TV cards" depends on VIDEO_CX88 && DVB_CORE select VIDEOBUF_DVB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_OR51132 if !DVB_FE_CUSTOMISE - select DVB_CX22702 if !DVB_FE_CUSTOMISE - select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select DVB_NXT200X if !DVB_FE_CUSTOMISE - select DVB_CX24123 if !DVB_FE_CUSTOMISE - select DVB_ISL6421 if !DVB_FE_CUSTOMISE - select DVB_S5H1411 if !DVB_FE_CUSTOMISE - select DVB_CX24116 if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_STV0288 if !DVB_FE_CUSTOMISE - select DVB_STB6000 if !DVB_FE_CUSTOMISE - select DVB_STV0900 if !DVB_FE_CUSTOMISE - select DVB_STB6100 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_OR51132 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX22702 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_NXT200X if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24123 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT ---help--- This adds support for DVB/ATSC cards based on the Conexant 2388x chip. diff --git a/drivers/media/video/cx88/Makefile b/drivers/media/pci/cx88/Makefile similarity index 73% rename from drivers/media/video/cx88/Makefile rename to drivers/media/pci/cx88/Makefile index c1a2785ba2431a607e9791edeeae6fa4f05adb5c..d3679c3ee248bf5bf5e14d1d0de2ea166bb2f1aa 100644 --- a/drivers/media/video/cx88/Makefile +++ b/drivers/media/pci/cx88/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_VIDEO_CX88_BLACKBIRD) += cx88-blackbird.o obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o obj-$(CONFIG_VIDEO_CX88_VP3054) += cx88-vp3054-i2c.o -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/pci/cx88/cx88-alsa.c similarity index 99% rename from drivers/media/video/cx88/cx88-alsa.c rename to drivers/media/pci/cx88/cx88-alsa.c index dfac6e34859fc2d7b8647ac4c8afdd70f6e2de8b..3aa6856ead3b2f13f71db61ee9ea329808c01be4 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/pci/cx88/cx88-alsa.c @@ -749,7 +749,7 @@ static struct snd_kcontrol_new snd_cx88_alc_switch = { * Only boards with eeprom and byte 1 at eeprom=1 have it */ -static const struct pci_device_id const cx88_audio_pci_tbl[] __devinitdata = { +static const struct pci_device_id cx88_audio_pci_tbl[] __devinitdata = { {0x14f1,0x8801,PCI_ANY_ID,PCI_ANY_ID,0,0,0}, {0x14f1,0x8811,PCI_ANY_ID,PCI_ANY_ID,0,0,0}, {0, } diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/pci/cx88/cx88-blackbird.c similarity index 99% rename from drivers/media/video/cx88/cx88-blackbird.c rename to drivers/media/pci/cx88/cx88-blackbird.c index 843ffd9e533b06a04e4eb7720743ec35624e4eb0..def363fb71c0664a72e6cf8fff5d54d398b7d3bc 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/pci/cx88/cx88-blackbird.c @@ -1236,7 +1236,7 @@ static int cx8802_blackbird_probe(struct cx8802_driver *drv) err = cx2341x_handler_init(&dev->cxhdl, 36); if (err) goto fail_core; - v4l2_ctrl_add_handler(&dev->cxhdl.hdl, &core->video_hdl); + v4l2_ctrl_add_handler(&dev->cxhdl.hdl, &core->video_hdl, NULL); /* blackbird stuff */ printk("%s/2: cx23416 based mpeg encoder (blackbird reference design)\n", diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/pci/cx88/cx88-cards.c similarity index 99% rename from drivers/media/video/cx88/cx88-cards.c rename to drivers/media/pci/cx88/cx88-cards.c index 4e9d4f7229602e3e3a4f3fbc1a321507a07d894a..0c255248cbcdb2054a3e02d4899f6f2688c2844f 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/pci/cx88/cx88-cards.c @@ -3028,9 +3028,9 @@ static int cx88_xc3028_winfast1800h_callback(struct cx88_core *core, cx_set(MO_GP1_IO, 0x1010); mdelay(50); cx_clear(MO_GP1_IO, 0x10); - mdelay(50); + mdelay(75); cx_set(MO_GP1_IO, 0x10); - mdelay(50); + mdelay(75); return 0; } return -EINVAL; diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/pci/cx88/cx88-core.c similarity index 99% rename from drivers/media/video/cx88/cx88-core.c rename to drivers/media/pci/cx88/cx88-core.c index e81c735f012a263b918bfdb324aff12578b06c1d..c97b174be3ab6313e9810c0c27b13b97ce2f3384 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/pci/cx88/cx88-core.c @@ -253,7 +253,7 @@ cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf) * 0x0c00 - FIFOs */ -const struct sram_channel const cx88_sram_channels[] = { +const struct sram_channel cx88_sram_channels[] = { [SRAM_CH21] = { .name = "video y / packed", .cmds_start = 0x180040, diff --git a/drivers/media/video/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c similarity index 100% rename from drivers/media/video/cx88/cx88-dsp.c rename to drivers/media/pci/cx88/cx88-dsp.c diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/pci/cx88/cx88-dvb.c similarity index 99% rename from drivers/media/video/cx88/cx88-dvb.c rename to drivers/media/pci/cx88/cx88-dvb.c index 003937cd72f553e80bceecdcb9a0befe8986630a..d803bba09525206e9710d401829251d829e04ede 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/pci/cx88/cx88-dvb.c @@ -1578,7 +1578,7 @@ static int dvb_register(struct cx8802_dev *dev) /* register everything */ res = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, - &dev->pci->dev, adapter_nr, mfe_shared, NULL); + &dev->pci->dev, adapter_nr, mfe_shared); if (res) goto frontend_detach; return res; diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/pci/cx88/cx88-i2c.c similarity index 100% rename from drivers/media/video/cx88/cx88-i2c.c rename to drivers/media/pci/cx88/cx88-i2c.c diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/pci/cx88/cx88-input.c similarity index 100% rename from drivers/media/video/cx88/cx88-input.c rename to drivers/media/pci/cx88/cx88-input.c diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/pci/cx88/cx88-mpeg.c similarity index 100% rename from drivers/media/video/cx88/cx88-mpeg.c rename to drivers/media/pci/cx88/cx88-mpeg.c diff --git a/drivers/media/video/cx88/cx88-reg.h b/drivers/media/pci/cx88/cx88-reg.h similarity index 100% rename from drivers/media/video/cx88/cx88-reg.h rename to drivers/media/pci/cx88/cx88-reg.h diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/pci/cx88/cx88-tvaudio.c similarity index 100% rename from drivers/media/video/cx88/cx88-tvaudio.c rename to drivers/media/pci/cx88/cx88-tvaudio.c diff --git a/drivers/media/video/cx88/cx88-vbi.c b/drivers/media/pci/cx88/cx88-vbi.c similarity index 100% rename from drivers/media/video/cx88/cx88-vbi.c rename to drivers/media/pci/cx88/cx88-vbi.c diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c similarity index 99% rename from drivers/media/video/cx88/cx88-video.c rename to drivers/media/pci/cx88/cx88-video.c index f6fcc7e763ab9c1964bbd9eab1d18b6bb6749eec..a146d50d77952fda04871e9a51c3136818d45f22 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/pci/cx88/cx88-video.c @@ -1795,7 +1795,7 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, if (vc->id == V4L2_CID_CHROMA_AGC) core->chroma_agc = vc; } - v4l2_ctrl_add_handler(&core->video_hdl, &core->audio_hdl); + v4l2_ctrl_add_handler(&core->video_hdl, &core->audio_hdl, NULL); /* load and configure helper modules */ diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.c b/drivers/media/pci/cx88/cx88-vp3054-i2c.c similarity index 100% rename from drivers/media/video/cx88/cx88-vp3054-i2c.c rename to drivers/media/pci/cx88/cx88-vp3054-i2c.c diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.h b/drivers/media/pci/cx88/cx88-vp3054-i2c.h similarity index 100% rename from drivers/media/video/cx88/cx88-vp3054-i2c.h rename to drivers/media/pci/cx88/cx88-vp3054-i2c.h diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/pci/cx88/cx88.h similarity index 99% rename from drivers/media/video/cx88/cx88.h rename to drivers/media/pci/cx88/cx88.h index 0cae0fd9e1647d50f73b4826c2a35861f71a771c..44ffc8b3d45f9f7a586404a0b37e8520ae804fa0 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/pci/cx88/cx88.h @@ -141,7 +141,7 @@ struct sram_channel { u32 cnt1_reg; u32 cnt2_reg; }; -extern const struct sram_channel const cx88_sram_channels[]; +extern const struct sram_channel cx88_sram_channels[]; /* ----------------------------------------------------------- */ /* card configuration */ diff --git a/drivers/media/dvb/ddbridge/Kconfig b/drivers/media/pci/ddbridge/Kconfig similarity index 60% rename from drivers/media/dvb/ddbridge/Kconfig rename to drivers/media/pci/ddbridge/Kconfig index d099e1a12c85ec0e6b03673f404a9714eb3dc2d0..44e5dc15e60a3712b874d3680e865e83df1f2b82 100644 --- a/drivers/media/dvb/ddbridge/Kconfig +++ b/drivers/media/pci/ddbridge/Kconfig @@ -1,11 +1,11 @@ config DVB_DDBRIDGE tristate "Digital Devices bridge support" depends on DVB_CORE && PCI && I2C - select DVB_LNBP21 if !DVB_FE_CUSTOMISE - select DVB_STV6110x if !DVB_FE_CUSTOMISE - select DVB_STV090x if !DVB_FE_CUSTOMISE - select DVB_DRXK if !DVB_FE_CUSTOMISE - select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT ---help--- Support for cards with the Digital Devices PCI express bridge: - Octopus PCIe Bridge diff --git a/drivers/media/dvb/ddbridge/Makefile b/drivers/media/pci/ddbridge/Makefile similarity index 61% rename from drivers/media/dvb/ddbridge/Makefile rename to drivers/media/pci/ddbridge/Makefile index 38019bafb862246b992f6026f77314f460cb2c78..7446c8b677b5c393a30edabdab8c55930b872b9c 100644 --- a/drivers/media/dvb/ddbridge/Makefile +++ b/drivers/media/pci/ddbridge/Makefile @@ -6,9 +6,9 @@ ddbridge-objs := ddbridge-core.o obj-$(CONFIG_DVB_DDBRIDGE) += ddbridge.o -ccflags-y += -Idrivers/media/dvb/dvb-core/ -ccflags-y += -Idrivers/media/dvb/frontends/ -ccflags-y += -Idrivers/media/common/tuners/ +ccflags-y += -Idrivers/media/dvb-core/ +ccflags-y += -Idrivers/media/dvb-frontends/ +ccflags-y += -Idrivers/media/tuners/ # For the staging CI driver cxd2099 ccflags-y += -Idrivers/staging/media/cxd2099/ diff --git a/drivers/media/dvb/ddbridge/ddbridge-core.c b/drivers/media/pci/ddbridge/ddbridge-core.c similarity index 99% rename from drivers/media/dvb/ddbridge/ddbridge-core.c rename to drivers/media/pci/ddbridge/ddbridge-core.c index ebf3f05839d2c5416488b77df70c825dc01ae467..feff57ee5a083b55ec1c822b69807d4d1df84851 100644 --- a/drivers/media/dvb/ddbridge/ddbridge-core.c +++ b/drivers/media/pci/ddbridge/ddbridge-core.c @@ -1497,7 +1497,7 @@ static int ddb_class_create(void) ddb_class = class_create(THIS_MODULE, DDB_NAME); if (IS_ERR(ddb_class)) { unregister_chrdev(ddb_major, DDB_NAME); - return -1; + return PTR_ERR(ddb_class); } ddb_class->devnode = ddb_devnode; return 0; @@ -1701,11 +1701,18 @@ static struct pci_driver ddb_pci_driver = { static __init int module_init_ddbridge(void) { + int ret; + printk(KERN_INFO "Digital Devices PCIE bridge driver, " "Copyright (C) 2010-11 Digital Devices GmbH\n"); - if (ddb_class_create()) - return -1; - return pci_register_driver(&ddb_pci_driver); + + ret = ddb_class_create(); + if (ret < 0) + return ret; + ret = pci_register_driver(&ddb_pci_driver); + if (ret < 0) + ddb_class_destroy(); + return ret; } static __exit void module_exit_ddbridge(void) diff --git a/drivers/media/dvb/ddbridge/ddbridge-regs.h b/drivers/media/pci/ddbridge/ddbridge-regs.h similarity index 100% rename from drivers/media/dvb/ddbridge/ddbridge-regs.h rename to drivers/media/pci/ddbridge/ddbridge-regs.h diff --git a/drivers/media/dvb/ddbridge/ddbridge.h b/drivers/media/pci/ddbridge/ddbridge.h similarity index 100% rename from drivers/media/dvb/ddbridge/ddbridge.h rename to drivers/media/pci/ddbridge/ddbridge.h diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/pci/dm1105/Kconfig similarity index 57% rename from drivers/media/dvb/dm1105/Kconfig rename to drivers/media/pci/dm1105/Kconfig index f3de0a4d63f26cd167134fc09c94137ef0a2a645..013df4e015cdcd0bd3ef08bf1b0d699e2ceeab93 100644 --- a/drivers/media/dvb/dm1105/Kconfig +++ b/drivers/media/pci/dm1105/Kconfig @@ -1,13 +1,13 @@ config DVB_DM1105 tristate "SDMC DM1105 based PCI cards" depends on DVB_CORE && PCI && I2C - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_STV0288 if !DVB_FE_CUSTOMISE - select DVB_STB6000 if !DVB_FE_CUSTOMISE - select DVB_CX24116 if !DVB_FE_CUSTOMISE - select DVB_SI21XX if !DVB_FE_CUSTOMISE - select DVB_DS3000 if !DVB_FE_CUSTOMISE + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT + select DVB_SI21XX if MEDIA_SUBDRV_AUTOSELECT + select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT depends on RC_CORE help Support for cards based on the SDMC DM1105 PCI chip like diff --git a/drivers/media/pci/dm1105/Makefile b/drivers/media/pci/dm1105/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..327585143c83ee00cea2365d4118a65b20e48a85 --- /dev/null +++ b/drivers/media/pci/dm1105/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_DVB_DM1105) += dm1105.o + +ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c similarity index 100% rename from drivers/media/dvb/dm1105/dm1105.c rename to drivers/media/pci/dm1105/dm1105.c diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/pci/ivtv/Kconfig similarity index 67% rename from drivers/media/video/ivtv/Kconfig rename to drivers/media/pci/ivtv/Kconfig index 89f65914cc8eb745f3659cfc6a44f93e1f7cf26b..dd6ee57e3a4c680da2708151275ce5e453a5892a 100644 --- a/drivers/media/video/ivtv/Kconfig +++ b/drivers/media/pci/ivtv/Kconfig @@ -28,6 +28,22 @@ config VIDEO_IVTV To compile this driver as a module, choose M here: the module will be called ivtv. +config VIDEO_IVTV_ALSA + tristate "Conexant cx23415/cx23416 ALSA interface for PCM audio capture" + depends on VIDEO_IVTV && SND + select SND_PCM + ---help--- + This driver provides an ALSA interface as another method for user + applications to obtain PCM audio data from Conexant cx23415/cx23416 + based PCI TV cards supported by the ivtv driver. + + The ALSA interface has much wider use in user applications performing + PCM audio capture, than the V4L2 "/dev/video24" PCM audio interface + provided by the main ivtv driver. + + To compile this driver as a module, choose M here: the + module will be called ivtv-alsa. + config VIDEO_FB_IVTV tristate "Conexant cx23415 framebuffer support" depends on VIDEO_IVTV && FB diff --git a/drivers/media/video/ivtv/Makefile b/drivers/media/pci/ivtv/Makefile similarity index 53% rename from drivers/media/video/ivtv/Makefile rename to drivers/media/pci/ivtv/Makefile index 77de8a45b46f56ca4a0d42e732164b562fb0c951..0eaa88298b7e11deea078cbf8b1d5c509c1c3b35 100644 --- a/drivers/media/video/ivtv/Makefile +++ b/drivers/media/pci/ivtv/Makefile @@ -3,12 +3,14 @@ ivtv-objs := ivtv-routing.o ivtv-cards.o ivtv-controls.o \ ivtv-gpio.o ivtv-i2c.o ivtv-ioctl.o ivtv-irq.o \ ivtv-mailbox.o ivtv-queue.o ivtv-streams.o ivtv-udma.o \ ivtv-vbi.o ivtv-yuv.o +ivtv-alsa-objs := ivtv-alsa-main.o ivtv-alsa-pcm.o obj-$(CONFIG_VIDEO_IVTV) += ivtv.o +obj-$(CONFIG_VIDEO_IVTV_ALSA) += ivtv-alsa.o obj-$(CONFIG_VIDEO_FB_IVTV) += ivtvfb.o -ccflags-y += -I$(srctree)/drivers/media/video -ccflags-y += -I$(srctree)/drivers/media/common/tuners -ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core -ccflags-y += -I$(srctree)/drivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/i2c +ccflags-y += -I$(srctree)/drivers/media/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb-frontends diff --git a/drivers/media/pci/ivtv/ivtv-alsa-main.c b/drivers/media/pci/ivtv/ivtv-alsa-main.c new file mode 100644 index 0000000000000000000000000000000000000000..8deab1629b3baca0d7b5999c43ef0f6869beaca7 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-alsa-main.c @@ -0,0 +1,303 @@ +/* + * ALSA interface to ivtv PCM capture streams + * + * Copyright (C) 2009,2012 Andy Walls + * Copyright (C) 2009 Devin Heitmueller + * + * Portions of this work were sponsored by ONELAN Limited for the cx18 driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include "ivtv-driver.h" +#include "ivtv-version.h" +#include "ivtv-alsa.h" +#include "ivtv-alsa-mixer.h" +#include "ivtv-alsa-pcm.h" + +int ivtv_alsa_debug; + +#define IVTV_DEBUG_ALSA_INFO(fmt, arg...) \ + do { \ + if (ivtv_alsa_debug & 2) \ + pr_info("%s: " fmt, "ivtv-alsa", ## arg); \ + } while (0) + +module_param_named(debug, ivtv_alsa_debug, int, 0644); +MODULE_PARM_DESC(debug, + "Debug level (bitmask). Default: 0\n" + "\t\t\t 1/0x0001: warning\n" + "\t\t\t 2/0x0002: info\n"); + +MODULE_AUTHOR("Andy Walls"); +MODULE_DESCRIPTION("CX23415/CX23416 ALSA Interface"); +MODULE_SUPPORTED_DEVICE("CX23415/CX23416 MPEG2 encoder"); +MODULE_LICENSE("GPL"); + +MODULE_VERSION(IVTV_VERSION); + +static inline +struct snd_ivtv_card *to_snd_ivtv_card(struct v4l2_device *v4l2_dev) +{ + return to_ivtv(v4l2_dev)->alsa; +} + +static inline +struct snd_ivtv_card *p_to_snd_ivtv_card(struct v4l2_device **v4l2_dev) +{ + return container_of(v4l2_dev, struct snd_ivtv_card, v4l2_dev); +} + +static void snd_ivtv_card_free(struct snd_ivtv_card *itvsc) +{ + if (itvsc == NULL) + return; + + if (itvsc->v4l2_dev != NULL) + to_ivtv(itvsc->v4l2_dev)->alsa = NULL; + + /* FIXME - take any other stopping actions needed */ + + kfree(itvsc); +} + +static void snd_ivtv_card_private_free(struct snd_card *sc) +{ + if (sc == NULL) + return; + snd_ivtv_card_free(sc->private_data); + sc->private_data = NULL; + sc->private_free = NULL; +} + +static int snd_ivtv_card_create(struct v4l2_device *v4l2_dev, + struct snd_card *sc, + struct snd_ivtv_card **itvsc) +{ + *itvsc = kzalloc(sizeof(struct snd_ivtv_card), GFP_KERNEL); + if (*itvsc == NULL) + return -ENOMEM; + + (*itvsc)->v4l2_dev = v4l2_dev; + (*itvsc)->sc = sc; + + sc->private_data = *itvsc; + sc->private_free = snd_ivtv_card_private_free; + + return 0; +} + +static int snd_ivtv_card_set_names(struct snd_ivtv_card *itvsc) +{ + struct ivtv *itv = to_ivtv(itvsc->v4l2_dev); + struct snd_card *sc = itvsc->sc; + + /* sc->driver is used by alsa-lib's configurator: simple, unique */ + strlcpy(sc->driver, "CX2341[56]", sizeof(sc->driver)); + + /* sc->shortname is a symlink in /proc/asound: IVTV-M -> cardN */ + snprintf(sc->shortname, sizeof(sc->shortname), "IVTV-%d", + itv->instance); + + /* sc->longname is read from /proc/asound/cards */ + snprintf(sc->longname, sizeof(sc->longname), + "CX2341[56] #%d %s TV/FM Radio/Line-In Capture", + itv->instance, itv->card_name); + + return 0; +} + +static int snd_ivtv_init(struct v4l2_device *v4l2_dev) +{ + struct ivtv *itv = to_ivtv(v4l2_dev); + struct snd_card *sc = NULL; + struct snd_ivtv_card *itvsc; + int ret; + + /* Numbrs steps from "Writing an ALSA Driver" by Takashi Iwai */ + + /* (1) Check and increment the device index */ + /* This is a no-op for us. We'll use the itv->instance */ + + /* (2) Create a card instance */ + ret = snd_card_create(SNDRV_DEFAULT_IDX1, /* use first available id */ + SNDRV_DEFAULT_STR1, /* xid from end of shortname*/ + THIS_MODULE, 0, &sc); + if (ret) { + IVTV_ALSA_ERR("%s: snd_card_create() failed with err %d\n", + __func__, ret); + goto err_exit; + } + + /* (3) Create a main component */ + ret = snd_ivtv_card_create(v4l2_dev, sc, &itvsc); + if (ret) { + IVTV_ALSA_ERR("%s: snd_ivtv_card_create() failed with err %d\n", + __func__, ret); + goto err_exit_free; + } + + /* (4) Set the driver ID and name strings */ + snd_ivtv_card_set_names(itvsc); + + /* (5) Create other components: mixer, PCM, & proc files */ +#if 0 + ret = snd_ivtv_mixer_create(itvsc); + if (ret) { + IVTV_ALSA_WARN("%s: snd_ivtv_mixer_create() failed with err %d:" + " proceeding anyway\n", __func__, ret); + } +#endif + + ret = snd_ivtv_pcm_create(itvsc); + if (ret) { + IVTV_ALSA_ERR("%s: snd_ivtv_pcm_create() failed with err %d\n", + __func__, ret); + goto err_exit_free; + } + /* FIXME - proc files */ + + /* (7) Set the driver data and return 0 */ + /* We do this out of normal order for PCI drivers to avoid races */ + itv->alsa = itvsc; + + /* (6) Register the card instance */ + ret = snd_card_register(sc); + if (ret) { + itv->alsa = NULL; + IVTV_ALSA_ERR("%s: snd_card_register() failed with err %d\n", + __func__, ret); + goto err_exit_free; + } + + return 0; + +err_exit_free: + if (sc != NULL) + snd_card_free(sc); + kfree(itvsc); +err_exit: + return ret; +} + +int ivtv_alsa_load(struct ivtv *itv) +{ + struct v4l2_device *v4l2_dev = &itv->v4l2_dev; + struct ivtv_stream *s; + + if (v4l2_dev == NULL) { + pr_err("ivtv-alsa: %s: struct v4l2_device * is NULL\n", + __func__); + return 0; + } + + itv = to_ivtv(v4l2_dev); + if (itv == NULL) { + pr_err("ivtv-alsa itv is NULL\n"); + return 0; + } + + s = &itv->streams[IVTV_ENC_STREAM_TYPE_PCM]; + if (s->vdev == NULL) { + IVTV_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - " + "skipping\n", __func__); + return 0; + } + + if (itv->alsa != NULL) { + IVTV_ALSA_ERR("%s: struct snd_ivtv_card * already exists\n", + __func__); + return 0; + } + + if (snd_ivtv_init(v4l2_dev)) { + IVTV_ALSA_ERR("%s: failed to create struct snd_ivtv_card\n", + __func__); + } else { + IVTV_DEBUG_ALSA_INFO("%s: created ivtv ALSA interface instance " + "\n", __func__); + } + return 0; +} + +static int __init ivtv_alsa_init(void) +{ + pr_info("ivtv-alsa: module loading...\n"); + ivtv_ext_init = &ivtv_alsa_load; + return 0; +} + +static void __exit snd_ivtv_exit(struct snd_ivtv_card *itvsc) +{ + struct ivtv *itv = to_ivtv(itvsc->v4l2_dev); + + /* FIXME - pointer checks & shutdown itvsc */ + + snd_card_free(itvsc->sc); + itv->alsa = NULL; +} + +static int __exit ivtv_alsa_exit_callback(struct device *dev, void *data) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev); + struct snd_ivtv_card *itvsc; + + if (v4l2_dev == NULL) { + pr_err("ivtv-alsa: %s: struct v4l2_device * is NULL\n", + __func__); + return 0; + } + + itvsc = to_snd_ivtv_card(v4l2_dev); + if (itvsc == NULL) { + IVTV_ALSA_WARN("%s: struct snd_ivtv_card * is NULL\n", + __func__); + return 0; + } + + snd_ivtv_exit(itvsc); + return 0; +} + +static void __exit ivtv_alsa_exit(void) +{ + struct device_driver *drv; + int ret; + + pr_info("ivtv-alsa: module unloading...\n"); + + drv = driver_find("ivtv", &pci_bus_type); + ret = driver_for_each_device(drv, NULL, NULL, ivtv_alsa_exit_callback); + (void)ret; /* suppress compiler warning */ + + ivtv_ext_init = NULL; + pr_info("ivtv-alsa: module unload complete\n"); +} + +module_init(ivtv_alsa_init); +module_exit(ivtv_alsa_exit); diff --git a/drivers/media/pci/ivtv/ivtv-alsa-mixer.c b/drivers/media/pci/ivtv/ivtv-alsa-mixer.c new file mode 100644 index 0000000000000000000000000000000000000000..33ec05b09af32aea52ebd89d59c2a52803f0f125 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-alsa-mixer.c @@ -0,0 +1,175 @@ +/* + * ALSA mixer controls for the + * ALSA interface to ivtv PCM capture streams + * + * Copyright (C) 2009,2012 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include "ivtv-alsa.h" +#include "ivtv-driver.h" + +/* + * Note the cx25840-core volume scale is funny, due to the alignment of the + * scale with another chip's range: + * + * v4l2_control value /512 indicated dB actual dB reg 0x8d4 + * 0x0000 - 0x01ff 0 -119 -96 228 + * 0x0200 - 0x02ff 1 -118 -96 228 + * ... + * 0x2c00 - 0x2dff 22 -97 -96 228 + * 0x2e00 - 0x2fff 23 -96 -96 228 + * 0x3000 - 0x31ff 24 -95 -95 226 + * ... + * 0xee00 - 0xefff 119 0 0 36 + * ... + * 0xfe00 - 0xffff 127 +8 +8 20 + */ +static inline int dB_to_cx25840_vol(int dB) +{ + if (dB < -96) + dB = -96; + else if (dB > 8) + dB = 8; + return (dB + 119) << 9; +} + +static inline int cx25840_vol_to_dB(int v) +{ + if (v < (23 << 9)) + v = (23 << 9); + else if (v > (127 << 9)) + v = (127 << 9); + return (v >> 9) - 119; +} + +static int snd_ivtv_mixer_tv_vol_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + /* We're already translating values, just keep this control in dB */ + uinfo->value.integer.min = -96; + uinfo->value.integer.max = 8; + uinfo->value.integer.step = 1; + return 0; +} + +static int snd_ivtv_mixer_tv_vol_get(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *uctl) +{ + struct snd_ivtv_card *itvsc = snd_kcontrol_chip(kctl); + struct ivtv *itv = to_ivtv(itvsc->v4l2_dev); + struct v4l2_control vctrl; + int ret; + + vctrl.id = V4L2_CID_AUDIO_VOLUME; + vctrl.value = dB_to_cx25840_vol(uctl->value.integer.value[0]); + + snd_ivtv_lock(itvsc); + ret = v4l2_subdev_call(itv->sd_audio, core, g_ctrl, &vctrl); + snd_ivtv_unlock(itvsc); + + if (!ret) + uctl->value.integer.value[0] = cx25840_vol_to_dB(vctrl.value); + return ret; +} + +static int snd_ivtv_mixer_tv_vol_put(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *uctl) +{ + struct snd_ivtv_card *itvsc = snd_kcontrol_chip(kctl); + struct ivtv *itv = to_ivtv(itvsc->v4l2_dev); + struct v4l2_control vctrl; + int ret; + + vctrl.id = V4L2_CID_AUDIO_VOLUME; + vctrl.value = dB_to_cx25840_vol(uctl->value.integer.value[0]); + + snd_ivtv_lock(itvsc); + + /* Fetch current state */ + ret = v4l2_subdev_call(itv->sd_audio, core, g_ctrl, &vctrl); + + if (ret || + (cx25840_vol_to_dB(vctrl.value) != uctl->value.integer.value[0])) { + + /* Set, if needed */ + vctrl.value = dB_to_cx25840_vol(uctl->value.integer.value[0]); + ret = v4l2_subdev_call(itv->sd_audio, core, s_ctrl, &vctrl); + if (!ret) + ret = 1; /* Indicate control was changed w/o error */ + } + snd_ivtv_unlock(itvsc); + + return ret; +} + + +/* This is a bit of overkill, the slider is already in dB internally */ +static DECLARE_TLV_DB_SCALE(snd_ivtv_mixer_tv_vol_db_scale, -9600, 100, 0); + +static struct snd_kcontrol_new snd_ivtv_mixer_tv_vol __initdata = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Analog TV Capture Volume", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .info = snd_ivtv_mixer_tv_volume_info, + .get = snd_ivtv_mixer_tv_volume_get, + .put = snd_ivtv_mixer_tv_volume_put, + .tlv.p = snd_ivtv_mixer_tv_vol_db_scale +}; + +/* FIXME - add mute switch and balance, bass, treble sliders: + V4L2_CID_AUDIO_MUTE + + V4L2_CID_AUDIO_BALANCE + + V4L2_CID_AUDIO_BASS + V4L2_CID_AUDIO_TREBLE +*/ + +/* FIXME - add stereo, lang1, lang2, mono menu */ +/* FIXME - add I2S volume */ + +int __init snd_ivtv_mixer_create(struct snd_ivtv_card *itvsc) +{ + struct v4l2_device *v4l2_dev = itvsc->v4l2_dev; + struct snd_card *sc = itvsc->sc; + int ret; + + strlcpy(sc->mixername, "CX2341[56] Mixer", sizeof(sc->mixername)); + + ret = snd_ctl_add(sc, snd_ctl_new1(snd_ivtv_mixer_tv_vol, itvsc)); + if (ret) { + IVTV_ALSA_WARN("%s: failed to add %s control, err %d\n", + __func__, snd_ivtv_mixer_tv_vol.name, ret); + } + return ret; +} diff --git a/drivers/media/pci/ivtv/ivtv-alsa-mixer.h b/drivers/media/pci/ivtv/ivtv-alsa-mixer.h new file mode 100644 index 0000000000000000000000000000000000000000..cdde36704d53e1822264caf0637cb15e699a63ab --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-alsa-mixer.h @@ -0,0 +1,23 @@ +/* + * ALSA mixer controls for the + * ALSA interface to ivtv PCM capture streams + * + * Copyright (C) 2009,2012 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int __init snd_ivtv_mixer_create(struct snd_ivtv_card *itvsc); diff --git a/drivers/media/pci/ivtv/ivtv-alsa-pcm.c b/drivers/media/pci/ivtv/ivtv-alsa-pcm.c new file mode 100644 index 0000000000000000000000000000000000000000..f7022bd58ffddcc5ffe3c137bf834b9b0437d66a --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-alsa-pcm.c @@ -0,0 +1,356 @@ +/* + * ALSA PCM device for the + * ALSA interface to ivtv PCM capture streams + * + * Copyright (C) 2009,2012 Andy Walls + * Copyright (C) 2009 Devin Heitmueller + * + * Portions of this work were sponsored by ONELAN Limited for the cx18 driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include +#include +#include + +#include + +#include +#include + +#include "ivtv-driver.h" +#include "ivtv-queue.h" +#include "ivtv-streams.h" +#include "ivtv-fileops.h" +#include "ivtv-alsa.h" + +static unsigned int pcm_debug; +module_param(pcm_debug, int, 0644); +MODULE_PARM_DESC(pcm_debug, "enable debug messages for pcm"); + +#define dprintk(fmt, arg...) \ + do { \ + if (pcm_debug) \ + pr_info("ivtv-alsa-pcm %s: " fmt, __func__, ##arg); \ + } while (0) + +static struct snd_pcm_hardware snd_ivtv_hw_capture = { + .info = SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_MMAP_VALID, + + .formats = SNDRV_PCM_FMTBIT_S16_LE, + + .rates = SNDRV_PCM_RATE_48000, + + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 62720 * 8, /* just about the value in usbaudio.c */ + .period_bytes_min = 64, /* 12544/2, */ + .period_bytes_max = 12544, + .periods_min = 2, + .periods_max = 98, /* 12544, */ +}; + +void ivtv_alsa_announce_pcm_data(struct snd_ivtv_card *itvsc, u8 *pcm_data, + size_t num_bytes) +{ + struct snd_pcm_substream *substream; + struct snd_pcm_runtime *runtime; + unsigned int oldptr; + unsigned int stride; + int period_elapsed = 0; + int length; + + dprintk("ivtv alsa announce ptr=%p data=%p num_bytes=%zd\n", itvsc, + pcm_data, num_bytes); + + substream = itvsc->capture_pcm_substream; + if (substream == NULL) { + dprintk("substream was NULL\n"); + return; + } + + runtime = substream->runtime; + if (runtime == NULL) { + dprintk("runtime was NULL\n"); + return; + } + + stride = runtime->frame_bits >> 3; + if (stride == 0) { + dprintk("stride is zero\n"); + return; + } + + length = num_bytes / stride; + if (length == 0) { + dprintk("%s: length was zero\n", __func__); + return; + } + + if (runtime->dma_area == NULL) { + dprintk("dma area was NULL - ignoring\n"); + return; + } + + oldptr = itvsc->hwptr_done_capture; + if (oldptr + length >= runtime->buffer_size) { + unsigned int cnt = + runtime->buffer_size - oldptr; + memcpy(runtime->dma_area + oldptr * stride, pcm_data, + cnt * stride); + memcpy(runtime->dma_area, pcm_data + cnt * stride, + length * stride - cnt * stride); + } else { + memcpy(runtime->dma_area + oldptr * stride, pcm_data, + length * stride); + } + snd_pcm_stream_lock(substream); + + itvsc->hwptr_done_capture += length; + if (itvsc->hwptr_done_capture >= + runtime->buffer_size) + itvsc->hwptr_done_capture -= + runtime->buffer_size; + + itvsc->capture_transfer_done += length; + if (itvsc->capture_transfer_done >= + runtime->period_size) { + itvsc->capture_transfer_done -= + runtime->period_size; + period_elapsed = 1; + } + + snd_pcm_stream_unlock(substream); + + if (period_elapsed) + snd_pcm_period_elapsed(substream); +} + +static int snd_ivtv_pcm_capture_open(struct snd_pcm_substream *substream) +{ + struct snd_ivtv_card *itvsc = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct v4l2_device *v4l2_dev = itvsc->v4l2_dev; + struct ivtv *itv = to_ivtv(v4l2_dev); + struct ivtv_stream *s; + struct ivtv_open_id item; + int ret; + + /* Instruct the CX2341[56] to start sending packets */ + snd_ivtv_lock(itvsc); + s = &itv->streams[IVTV_ENC_STREAM_TYPE_PCM]; + + v4l2_fh_init(&item.fh, s->vdev); + item.itv = itv; + item.type = s->type; + + /* See if the stream is available */ + if (ivtv_claim_stream(&item, item.type)) { + /* No, it's already in use */ + snd_ivtv_unlock(itvsc); + return -EBUSY; + } + + if (test_bit(IVTV_F_S_STREAMOFF, &s->s_flags) || + test_and_set_bit(IVTV_F_S_STREAMING, &s->s_flags)) { + /* We're already streaming. No additional action required */ + snd_ivtv_unlock(itvsc); + return 0; + } + + + runtime->hw = snd_ivtv_hw_capture; + snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); + itvsc->capture_pcm_substream = substream; + runtime->private_data = itv; + + itv->pcm_announce_callback = ivtv_alsa_announce_pcm_data; + + /* Not currently streaming, so start it up */ + set_bit(IVTV_F_S_STREAMING, &s->s_flags); + ret = ivtv_start_v4l2_encode_stream(s); + snd_ivtv_unlock(itvsc); + + return ret; +} + +static int snd_ivtv_pcm_capture_close(struct snd_pcm_substream *substream) +{ + struct snd_ivtv_card *itvsc = snd_pcm_substream_chip(substream); + struct v4l2_device *v4l2_dev = itvsc->v4l2_dev; + struct ivtv *itv = to_ivtv(v4l2_dev); + struct ivtv_stream *s; + + /* Instruct the ivtv to stop sending packets */ + snd_ivtv_lock(itvsc); + s = &itv->streams[IVTV_ENC_STREAM_TYPE_PCM]; + ivtv_stop_v4l2_encode_stream(s, 0); + clear_bit(IVTV_F_S_STREAMING, &s->s_flags); + + ivtv_release_stream(s); + + itv->pcm_announce_callback = NULL; + snd_ivtv_unlock(itvsc); + + return 0; +} + +static int snd_ivtv_pcm_ioctl(struct snd_pcm_substream *substream, + unsigned int cmd, void *arg) +{ + struct snd_ivtv_card *itvsc = snd_pcm_substream_chip(substream); + int ret; + + snd_ivtv_lock(itvsc); + ret = snd_pcm_lib_ioctl(substream, cmd, arg); + snd_ivtv_unlock(itvsc); + return ret; +} + + +static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, + size_t size) +{ + struct snd_pcm_runtime *runtime = subs->runtime; + + dprintk("Allocating vbuffer\n"); + if (runtime->dma_area) { + if (runtime->dma_bytes > size) + return 0; + + vfree(runtime->dma_area); + } + runtime->dma_area = vmalloc(size); + if (!runtime->dma_area) + return -ENOMEM; + + runtime->dma_bytes = size; + + return 0; +} + +static int snd_ivtv_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + dprintk("%s called\n", __func__); + + return snd_pcm_alloc_vmalloc_buffer(substream, + params_buffer_bytes(params)); +} + +static int snd_ivtv_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_ivtv_card *itvsc = snd_pcm_substream_chip(substream); + unsigned long flags; + + spin_lock_irqsave(&itvsc->slock, flags); + if (substream->runtime->dma_area) { + dprintk("freeing pcm capture region\n"); + vfree(substream->runtime->dma_area); + substream->runtime->dma_area = NULL; + } + spin_unlock_irqrestore(&itvsc->slock, flags); + + return 0; +} + +static int snd_ivtv_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct snd_ivtv_card *itvsc = snd_pcm_substream_chip(substream); + + itvsc->hwptr_done_capture = 0; + itvsc->capture_transfer_done = 0; + + return 0; +} + +static int snd_ivtv_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + return 0; +} + +static +snd_pcm_uframes_t snd_ivtv_pcm_pointer(struct snd_pcm_substream *substream) +{ + unsigned long flags; + snd_pcm_uframes_t hwptr_done; + struct snd_ivtv_card *itvsc = snd_pcm_substream_chip(substream); + + spin_lock_irqsave(&itvsc->slock, flags); + hwptr_done = itvsc->hwptr_done_capture; + spin_unlock_irqrestore(&itvsc->slock, flags); + + return hwptr_done; +} + +static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs, + unsigned long offset) +{ + void *pageptr = subs->runtime->dma_area + offset; + + return vmalloc_to_page(pageptr); +} + +static struct snd_pcm_ops snd_ivtv_pcm_capture_ops = { + .open = snd_ivtv_pcm_capture_open, + .close = snd_ivtv_pcm_capture_close, + .ioctl = snd_ivtv_pcm_ioctl, + .hw_params = snd_ivtv_pcm_hw_params, + .hw_free = snd_ivtv_pcm_hw_free, + .prepare = snd_ivtv_pcm_prepare, + .trigger = snd_ivtv_pcm_trigger, + .pointer = snd_ivtv_pcm_pointer, + .page = snd_pcm_get_vmalloc_page, +}; + +int snd_ivtv_pcm_create(struct snd_ivtv_card *itvsc) +{ + struct snd_pcm *sp; + struct snd_card *sc = itvsc->sc; + struct v4l2_device *v4l2_dev = itvsc->v4l2_dev; + struct ivtv *itv = to_ivtv(v4l2_dev); + int ret; + + ret = snd_pcm_new(sc, "CX2341[56] PCM", + 0, /* PCM device 0, the only one for this card */ + 0, /* 0 playback substreams */ + 1, /* 1 capture substream */ + &sp); + if (ret) { + IVTV_ALSA_ERR("%s: snd_ivtv_pcm_create() failed with err %d\n", + __func__, ret); + goto err_exit; + } + + spin_lock_init(&itvsc->slock); + + snd_pcm_set_ops(sp, SNDRV_PCM_STREAM_CAPTURE, + &snd_ivtv_pcm_capture_ops); + sp->info_flags = 0; + sp->private_data = itvsc; + strlcpy(sp->name, itv->card_name, sizeof(sp->name)); + + return 0; + +err_exit: + return ret; +} diff --git a/drivers/media/pci/ivtv/ivtv-alsa-pcm.h b/drivers/media/pci/ivtv/ivtv-alsa-pcm.h new file mode 100644 index 0000000000000000000000000000000000000000..5ab18319ea4db5ab3d6df28a8e634994e0068c10 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-alsa-pcm.h @@ -0,0 +1,27 @@ +/* + * ALSA PCM device for the + * ALSA interface to ivtv PCM capture streams + * + * Copyright (C) 2009,2012 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +int __init snd_ivtv_pcm_create(struct snd_ivtv_card *itvsc); + +/* Used by ivtv driver to announce the PCM data to the module */ +void ivtv_alsa_announce_pcm_data(struct snd_ivtv_card *card, u8 *pcm_data, + size_t num_bytes); diff --git a/drivers/media/pci/ivtv/ivtv-alsa.h b/drivers/media/pci/ivtv/ivtv-alsa.h new file mode 100644 index 0000000000000000000000000000000000000000..4a0d8f2c254deca6e740a599b6af19245bbd32d9 --- /dev/null +++ b/drivers/media/pci/ivtv/ivtv-alsa.h @@ -0,0 +1,75 @@ +/* + * ALSA interface to ivtv PCM capture streams + * + * Copyright (C) 2009,2012 Andy Walls + * Copyright (C) 2009 Devin Heitmueller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +struct snd_card; + +struct snd_ivtv_card { + struct v4l2_device *v4l2_dev; + struct snd_card *sc; + unsigned int capture_transfer_done; + unsigned int hwptr_done_capture; + struct snd_pcm_substream *capture_pcm_substream; + spinlock_t slock; +}; + +extern int ivtv_alsa_debug; + +/* + * File operations that manipulate the encoder or video or audio subdevices + * need to be serialized. Use the same lock we use for v4l2 file ops. + */ +static inline void snd_ivtv_lock(struct snd_ivtv_card *itvsc) +{ + struct ivtv *itv = to_ivtv(itvsc->v4l2_dev); + mutex_lock(&itv->serialize_lock); +} + +static inline void snd_ivtv_unlock(struct snd_ivtv_card *itvsc) +{ + struct ivtv *itv = to_ivtv(itvsc->v4l2_dev); + mutex_unlock(&itv->serialize_lock); +} + +#define IVTV_ALSA_DBGFLG_WARN (1 << 0) +#define IVTV_ALSA_DBGFLG_INFO (1 << 1) + +#define IVTV_ALSA_DEBUG(x, type, fmt, args...) \ + do { \ + if ((x) & ivtv_alsa_debug) \ + pr_info("%s-alsa: " type ": " fmt, \ + v4l2_dev->name , ## args); \ + } while (0) + +#define IVTV_ALSA_DEBUG_WARN(fmt, args...) \ + IVTV_ALSA_DEBUG(IVTV_ALSA_DBGFLG_WARN, "warning", fmt , ## args) + +#define IVTV_ALSA_DEBUG_INFO(fmt, args...) \ + IVTV_ALSA_DEBUG(IVTV_ALSA_DBGFLG_INFO, "info", fmt , ## args) + +#define IVTV_ALSA_ERR(fmt, args...) \ + pr_err("%s-alsa: " fmt, v4l2_dev->name , ## args) + +#define IVTV_ALSA_WARN(fmt, args...) \ + pr_warn("%s-alsa: " fmt, v4l2_dev->name , ## args) + +#define IVTV_ALSA_INFO(fmt, args...) \ + pr_info("%s-alsa: " fmt, v4l2_dev->name , ## args) diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/pci/ivtv/ivtv-cards.c similarity index 100% rename from drivers/media/video/ivtv/ivtv-cards.c rename to drivers/media/pci/ivtv/ivtv-cards.c diff --git a/drivers/media/video/ivtv/ivtv-cards.h b/drivers/media/pci/ivtv/ivtv-cards.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-cards.h rename to drivers/media/pci/ivtv/ivtv-cards.h diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/pci/ivtv/ivtv-controls.c similarity index 100% rename from drivers/media/video/ivtv/ivtv-controls.c rename to drivers/media/pci/ivtv/ivtv-controls.c diff --git a/drivers/media/video/ivtv/ivtv-controls.h b/drivers/media/pci/ivtv/ivtv-controls.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-controls.h rename to drivers/media/pci/ivtv/ivtv-controls.h diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/pci/ivtv/ivtv-driver.c similarity index 97% rename from drivers/media/video/ivtv/ivtv-driver.c rename to drivers/media/pci/ivtv/ivtv-driver.c index 5462ce2f60ea9dc647572a0ae93796c26f1b3775..74e9a503236432b8c606ebfed56e87bca1fca10d 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/pci/ivtv/ivtv-driver.c @@ -68,6 +68,10 @@ setting this to 1 you ensure that radio0 is now also radio1. */ int ivtv_first_minor; +/* Callback for registering extensions */ +int (*ivtv_ext_init)(struct ivtv *); +EXPORT_SYMBOL(ivtv_ext_init); + /* add your revision and whatnot here */ static struct pci_device_id ivtv_pci_tbl[] __devinitdata = { {PCI_VENDOR_ID_ICOMP, PCI_DEVICE_ID_IVTV15, @@ -279,6 +283,34 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(IVTV_VERSION); +#if defined(CONFIG_MODULES) && defined(MODULE) +static void request_module_async(struct work_struct *work) +{ + struct ivtv *dev = container_of(work, struct ivtv, request_module_wk); + + /* Make sure ivtv-alsa module is loaded */ + request_module("ivtv-alsa"); + + /* Initialize ivtv-alsa for this instance of the cx18 device */ + if (ivtv_ext_init != NULL) + ivtv_ext_init(dev); +} + +static void request_modules(struct ivtv *dev) +{ + INIT_WORK(&dev->request_module_wk, request_module_async); + schedule_work(&dev->request_module_wk); +} + +static void flush_request_modules(struct ivtv *dev) +{ + flush_work_sync(&dev->request_module_wk); +} +#else +#define request_modules(dev) +#define flush_request_modules(dev) +#endif /* CONFIG_MODULES */ + void ivtv_clear_irq_mask(struct ivtv *itv, u32 mask) { itv->irqmask &= ~mask; @@ -1253,6 +1285,9 @@ static int __devinit ivtv_probe(struct pci_dev *pdev, goto free_streams; } IVTV_INFO("Initialized card: %s\n", itv->card_name); + + /* Load ivtv submodules (ivtv-alsa) */ + request_modules(itv); return 0; free_streams: @@ -1290,6 +1325,7 @@ int ivtv_init_on_first_open(struct ivtv *itv) int video_input; fh.itv = itv; + fh.type = IVTV_ENC_STREAM_TYPE_MPG; if (test_bit(IVTV_F_I_FAILED, &itv->i_flags)) return -ENXIO; @@ -1380,6 +1416,8 @@ static void ivtv_remove(struct pci_dev *pdev) IVTV_DEBUG_INFO("Removing card\n"); + flush_request_modules(itv); + if (test_bit(IVTV_F_I_INITED, &itv->i_flags)) { /* Stop all captures */ IVTV_DEBUG_INFO("Stopping all streams\n"); diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/pci/ivtv/ivtv-driver.h similarity index 98% rename from drivers/media/video/ivtv/ivtv-driver.h rename to drivers/media/pci/ivtv/ivtv-driver.h index a7e00f8938f818a1b2a0730fac2517f5005d65fb..bc309f42c8ed29bb2782cb70521250b6f809c7d4 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/pci/ivtv/ivtv-driver.h @@ -259,6 +259,7 @@ struct ivtv_mailbox_data { #define IVTV_F_I_DEC_PAUSED 20 /* the decoder is paused */ #define IVTV_F_I_INITED 21 /* set after first open */ #define IVTV_F_I_FAILED 22 /* set if first open failed */ +#define IVTV_F_I_WORK_HANDLER_PCM 23 /* there is work to be done for PCM */ /* Event notifications */ #define IVTV_F_I_EV_DEC_STOPPED 28 /* decoder stopped event */ @@ -669,6 +670,13 @@ struct ivtv { atomic_t capturing; /* count number of active capture streams */ atomic_t decoding; /* count number of active decoding streams */ + /* ALSA interface for PCM capture stream */ + struct snd_ivtv_card *alsa; + void (*pcm_announce_callback)(struct snd_ivtv_card *card, u8 *pcm_data, + size_t num_bytes); + + /* Used for ivtv-alsa module loading */ + struct work_struct request_module_wk; /* Interrupts & DMA */ u32 irqmask; /* active interrupts */ @@ -752,6 +760,9 @@ static inline struct ivtv *to_ivtv(struct v4l2_device *v4l2_dev) return container_of(v4l2_dev, struct ivtv, v4l2_dev); } +/* ivtv extensions to be loaded */ +extern int (*ivtv_ext_init)(struct ivtv *); + /* Globals */ extern int ivtv_first_minor; diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/pci/ivtv/ivtv-fileops.c similarity index 96% rename from drivers/media/video/ivtv/ivtv-fileops.c rename to drivers/media/pci/ivtv/ivtv-fileops.c index 9ff69b5a87e2bda7294e29480f751ffdefd08ac2..9caffd8aa99513075fd9c4a86527c0c0bb3ba323 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/pci/ivtv/ivtv-fileops.c @@ -41,7 +41,7 @@ associated VBI streams are also automatically claimed. Possible error returns: -EBUSY if someone else has claimed the stream or 0 on success. */ -static int ivtv_claim_stream(struct ivtv_open_id *id, int type) +int ivtv_claim_stream(struct ivtv_open_id *id, int type) { struct ivtv *itv = id->itv; struct ivtv_stream *s = &itv->streams[type]; @@ -96,6 +96,7 @@ static int ivtv_claim_stream(struct ivtv_open_id *id, int type) set_bit(IVTV_F_S_INTERNAL_USE, &s_vbi->s_flags); return 0; } +EXPORT_SYMBOL(ivtv_claim_stream); /* This function releases a previously claimed stream. It will take into account associated VBI streams. */ @@ -146,6 +147,7 @@ void ivtv_release_stream(struct ivtv_stream *s) clear_bit(IVTV_F_S_CLAIMED, &s_vbi->s_flags); ivtv_flush_queues(s_vbi); } +EXPORT_SYMBOL(ivtv_release_stream); static void ivtv_dualwatch(struct ivtv *itv) { @@ -433,7 +435,7 @@ int ivtv_start_capture(struct ivtv_open_id *id) s->type == IVTV_DEC_STREAM_TYPE_YUV || s->type == IVTV_DEC_STREAM_TYPE_VOUT) { /* you cannot read from these stream types. */ - return -EPERM; + return -EINVAL; } /* Try to claim this stream. */ @@ -505,14 +507,17 @@ ssize_t ivtv_v4l2_read(struct file * filp, char __user *buf, size_t count, loff_ struct ivtv_open_id *id = fh2id(filp->private_data); struct ivtv *itv = id->itv; struct ivtv_stream *s = &itv->streams[id->type]; - int rc; + ssize_t rc; IVTV_DEBUG_HI_FILE("read %zd bytes from %s\n", count, s->name); + if (mutex_lock_interruptible(&itv->serialize_lock)) + return -ERESTARTSYS; rc = ivtv_start_capture(id); - if (rc) - return rc; - return ivtv_read_pos(s, buf, count, pos, filp->f_flags & O_NONBLOCK); + if (!rc) + rc = ivtv_read_pos(s, buf, count, pos, filp->f_flags & O_NONBLOCK); + mutex_unlock(&itv->serialize_lock); + return rc; } int ivtv_start_decoding(struct ivtv_open_id *id, int speed) @@ -540,7 +545,7 @@ int ivtv_start_decoding(struct ivtv_open_id *id, int speed) return 0; } -ssize_t ivtv_v4l2_write(struct file *filp, const char __user *user_buf, size_t count, loff_t *pos) +static ssize_t ivtv_write(struct file *filp, const char __user *user_buf, size_t count, loff_t *pos) { struct ivtv_open_id *id = fh2id(filp->private_data); struct ivtv *itv = id->itv; @@ -559,7 +564,7 @@ ssize_t ivtv_v4l2_write(struct file *filp, const char __user *user_buf, size_t c s->type != IVTV_DEC_STREAM_TYPE_YUV && s->type != IVTV_DEC_STREAM_TYPE_VOUT) /* not decoder streams */ - return -EPERM; + return -EINVAL; /* Try to claim this stream */ if (ivtv_claim_stream(id, s->type)) @@ -712,6 +717,19 @@ ssize_t ivtv_v4l2_write(struct file *filp, const char __user *user_buf, size_t c return bytes_written; } +ssize_t ivtv_v4l2_write(struct file *filp, const char __user *user_buf, size_t count, loff_t *pos) +{ + struct ivtv_open_id *id = fh2id(filp->private_data); + struct ivtv *itv = id->itv; + ssize_t res; + + if (mutex_lock_interruptible(&itv->serialize_lock)) + return -ERESTARTSYS; + res = ivtv_write(filp, user_buf, count, pos); + mutex_unlock(&itv->serialize_lock); + return res; +} + unsigned int ivtv_v4l2_dec_poll(struct file *filp, poll_table *wait) { struct ivtv_open_id *id = fh2id(filp->private_data); @@ -757,10 +775,13 @@ unsigned int ivtv_v4l2_enc_poll(struct file *filp, poll_table *wait) /* Start a capture if there is none */ if (!eof && !test_bit(IVTV_F_S_STREAMING, &s->s_flags) && + s->type != IVTV_ENC_STREAM_TYPE_RAD && (req_events & (POLLIN | POLLRDNORM))) { int rc; + mutex_lock(&itv->serialize_lock); rc = ivtv_start_capture(id); + mutex_unlock(&itv->serialize_lock); if (rc) { IVTV_DEBUG_INFO("Could not start capture for %s (%d)\n", s->name, rc); @@ -863,6 +884,8 @@ int ivtv_v4l2_close(struct file *filp) IVTV_DEBUG_FILE("close %s\n", s->name); + mutex_lock(&itv->serialize_lock); + /* Stop radio */ if (id->type == IVTV_ENC_STREAM_TYPE_RAD && v4l2_fh_is_singular_file(filp)) { @@ -892,10 +915,8 @@ int ivtv_v4l2_close(struct file *filp) v4l2_fh_exit(fh); /* Easy case first: this stream was never claimed by us */ - if (s->fh != &id->fh) { - kfree(id); - return 0; - } + if (s->fh != &id->fh) + goto close_done; /* 'Unclaim' this stream */ @@ -913,11 +934,13 @@ int ivtv_v4l2_close(struct file *filp) } else { ivtv_stop_capture(id, 0); } +close_done: kfree(id); + mutex_unlock(&itv->serialize_lock); return 0; } -int ivtv_v4l2_open(struct file *filp) +static int ivtv_open(struct file *filp) { struct video_device *vdev = video_devdata(filp); struct ivtv_stream *s = video_get_drvdata(vdev); @@ -1020,6 +1043,18 @@ int ivtv_v4l2_open(struct file *filp) return 0; } +int ivtv_v4l2_open(struct file *filp) +{ + struct video_device *vdev = video_devdata(filp); + int res; + + if (mutex_lock_interruptible(vdev->lock)) + return -ERESTARTSYS; + res = ivtv_open(filp); + mutex_unlock(vdev->lock); + return res; +} + void ivtv_mute(struct ivtv *itv) { if (atomic_read(&itv->capturing)) diff --git a/drivers/media/video/ivtv/ivtv-fileops.h b/drivers/media/pci/ivtv/ivtv-fileops.h similarity index 94% rename from drivers/media/video/ivtv/ivtv-fileops.h rename to drivers/media/pci/ivtv/ivtv-fileops.h index 049a2923965d9259713230f5612f150d69773f79..5e08800772ca64830f90d09a55197e5dde94f216 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.h +++ b/drivers/media/pci/ivtv/ivtv-fileops.h @@ -37,8 +37,8 @@ void ivtv_mute(struct ivtv *itv); void ivtv_unmute(struct ivtv *itv); /* Utilities */ - -/* Release a previously claimed stream. */ +/* Shared with ivtv-alsa module */ +int ivtv_claim_stream(struct ivtv_open_id *id, int type); void ivtv_release_stream(struct ivtv_stream *s); #endif diff --git a/drivers/media/video/ivtv/ivtv-firmware.c b/drivers/media/pci/ivtv/ivtv-firmware.c similarity index 98% rename from drivers/media/video/ivtv/ivtv-firmware.c rename to drivers/media/pci/ivtv/ivtv-firmware.c index 02c5adebf517aac57248c473a60c793952629e75..6ec7705af55592015ed8ca07fc8e311866077d69 100644 --- a/drivers/media/video/ivtv/ivtv-firmware.c +++ b/drivers/media/pci/ivtv/ivtv-firmware.c @@ -396,3 +396,7 @@ int ivtv_firmware_check(struct ivtv *itv, char *where) return res; } + +MODULE_FIRMWARE(CX2341X_FIRM_ENC_FILENAME); +MODULE_FIRMWARE(CX2341X_FIRM_DEC_FILENAME); +MODULE_FIRMWARE(IVTV_DECODE_INIT_MPEG_FILENAME); diff --git a/drivers/media/video/ivtv/ivtv-firmware.h b/drivers/media/pci/ivtv/ivtv-firmware.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-firmware.h rename to drivers/media/pci/ivtv/ivtv-firmware.h diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/pci/ivtv/ivtv-gpio.c similarity index 100% rename from drivers/media/video/ivtv/ivtv-gpio.c rename to drivers/media/pci/ivtv/ivtv-gpio.c diff --git a/drivers/media/video/ivtv/ivtv-gpio.h b/drivers/media/pci/ivtv/ivtv-gpio.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-gpio.h rename to drivers/media/pci/ivtv/ivtv-gpio.h diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/pci/ivtv/ivtv-i2c.c similarity index 100% rename from drivers/media/video/ivtv/ivtv-i2c.c rename to drivers/media/pci/ivtv/ivtv-i2c.c diff --git a/drivers/media/video/ivtv/ivtv-i2c.h b/drivers/media/pci/ivtv/ivtv-i2c.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-i2c.h rename to drivers/media/pci/ivtv/ivtv-i2c.h diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/pci/ivtv/ivtv-ioctl.c similarity index 95% rename from drivers/media/video/ivtv/ivtv-ioctl.c rename to drivers/media/pci/ivtv/ivtv-ioctl.c index 32a591062d0b0b3b59f925c496d9cc60aa6ef230..949ae230e119b80caae93490186613d51bd5e151 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/pci/ivtv/ivtv-ioctl.c @@ -289,6 +289,8 @@ static int ivtv_video_command(struct ivtv *itv, struct ivtv_open_id *id, case V4L2_DEC_CMD_PAUSE: dc->flags &= V4L2_DEC_CMD_PAUSE_TO_BLACK; if (try) break; + if (!atomic_read(&itv->decoding)) + return -EPERM; if (itv->output_mode != OUT_MPG) return -EBUSY; if (atomic_read(&itv->decoding) > 0) { @@ -301,6 +303,8 @@ static int ivtv_video_command(struct ivtv *itv, struct ivtv_open_id *id, case V4L2_DEC_CMD_RESUME: dc->flags = 0; if (try) break; + if (!atomic_read(&itv->decoding)) + return -EPERM; if (itv->output_mode != OUT_MPG) return -EBUSY; if (test_and_clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags)) { @@ -326,6 +330,7 @@ static int ivtv_g_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_fo if (!(itv->v4l2_cap & V4L2_CAP_SLICED_VBI_OUTPUT)) return -EINVAL; vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + memset(vbifmt->service_lines, 0, sizeof(vbifmt->service_lines)); if (itv->is_60hz) { vbifmt->service_lines[0][21] = V4L2_SLICED_CAPTION_525; vbifmt->service_lines[1][21] = V4L2_SLICED_CAPTION_525; @@ -393,6 +398,7 @@ static int ivtv_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo vbifmt->service_set = itv->is_50hz ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525; ivtv_expand_service_set(vbifmt, itv->is_50hz); + vbifmt->service_set = ivtv_get_service_set(vbifmt); return 0; } @@ -784,7 +790,7 @@ static int ivtv_g_audio(struct file *file, void *fh, struct v4l2_audio *vin) return ivtv_get_audio_input(itv, vin->index, vin); } -static int ivtv_s_audio(struct file *file, void *fh, struct v4l2_audio *vout) +static int ivtv_s_audio(struct file *file, void *fh, const struct v4l2_audio *vout) { struct ivtv *itv = fh2id(fh)->itv; @@ -813,11 +819,13 @@ static int ivtv_g_audout(struct file *file, void *fh, struct v4l2_audioout *vin) return ivtv_get_audio_output(itv, vin->index, vin); } -static int ivtv_s_audout(struct file *file, void *fh, struct v4l2_audioout *vout) +static int ivtv_s_audout(struct file *file, void *fh, const struct v4l2_audioout *vout) { struct ivtv *itv = fh2id(fh)->itv; - return ivtv_get_audio_output(itv, vout->index, vout); + if (itv->card->video_outputs == NULL || vout->index != 0) + return -EINVAL; + return 0; } static int ivtv_enum_input(struct file *file, void *fh, struct v4l2_input *vin) @@ -872,7 +880,7 @@ static int ivtv_cropcap(struct file *file, void *fh, struct v4l2_cropcap *cropca return 0; } -static int ivtv_s_crop(struct file *file, void *fh, struct v4l2_crop *crop) +static int ivtv_s_crop(struct file *file, void *fh, const struct v4l2_crop *crop) { struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; @@ -920,51 +928,53 @@ static int ivtv_g_crop(struct file *file, void *fh, struct v4l2_crop *crop) static int ivtv_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) { - static struct v4l2_fmtdesc formats[] = { - { 0, 0, 0, - "HM12 (YUV 4:2:0)", V4L2_PIX_FMT_HM12, - { 0, 0, 0, 0 } - }, - { 1, 0, V4L2_FMT_FLAG_COMPRESSED, - "MPEG", V4L2_PIX_FMT_MPEG, - { 0, 0, 0, 0 } - } + static const struct v4l2_fmtdesc hm12 = { + 0, V4L2_BUF_TYPE_VIDEO_CAPTURE, 0, + "HM12 (YUV 4:2:0)", V4L2_PIX_FMT_HM12, + { 0, 0, 0, 0 } + }; + static const struct v4l2_fmtdesc mpeg = { + 0, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FMT_FLAG_COMPRESSED, + "MPEG", V4L2_PIX_FMT_MPEG, + { 0, 0, 0, 0 } }; - enum v4l2_buf_type type = fmt->type; + struct ivtv *itv = fh2id(fh)->itv; + struct ivtv_stream *s = &itv->streams[fh2id(fh)->type]; - if (fmt->index > 1) + if (fmt->index) + return -EINVAL; + if (s->type == IVTV_ENC_STREAM_TYPE_MPG) + *fmt = mpeg; + else if (s->type == IVTV_ENC_STREAM_TYPE_YUV) + *fmt = hm12; + else return -EINVAL; - - *fmt = formats[fmt->index]; - fmt->type = type; return 0; } static int ivtv_enum_fmt_vid_out(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) { - struct ivtv *itv = fh2id(fh)->itv; - - static struct v4l2_fmtdesc formats[] = { - { 0, 0, 0, - "HM12 (YUV 4:2:0)", V4L2_PIX_FMT_HM12, - { 0, 0, 0, 0 } - }, - { 1, 0, V4L2_FMT_FLAG_COMPRESSED, - "MPEG", V4L2_PIX_FMT_MPEG, - { 0, 0, 0, 0 } - } + static const struct v4l2_fmtdesc hm12 = { + 0, V4L2_BUF_TYPE_VIDEO_OUTPUT, 0, + "HM12 (YUV 4:2:0)", V4L2_PIX_FMT_HM12, + { 0, 0, 0, 0 } + }; + static const struct v4l2_fmtdesc mpeg = { + 0, V4L2_BUF_TYPE_VIDEO_OUTPUT, V4L2_FMT_FLAG_COMPRESSED, + "MPEG", V4L2_PIX_FMT_MPEG, + { 0, 0, 0, 0 } }; - enum v4l2_buf_type type = fmt->type; + struct ivtv *itv = fh2id(fh)->itv; + struct ivtv_stream *s = &itv->streams[fh2id(fh)->type]; - if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + if (fmt->index) return -EINVAL; - - if (fmt->index > 1) + if (s->type == IVTV_DEC_STREAM_TYPE_MPG) + *fmt = mpeg; + else if (s->type == IVTV_DEC_STREAM_TYPE_YUV) + *fmt = hm12; + else return -EINVAL; - - *fmt = formats[fmt->index]; - fmt->type = type; - return 0; } @@ -980,6 +990,8 @@ static int ivtv_g_input(struct file *file, void *fh, unsigned int *i) int ivtv_s_input(struct file *file, void *fh, unsigned int inp) { struct ivtv *itv = fh2id(fh)->itv; + v4l2_std_id std; + int i; if (inp < 0 || inp >= itv->nof_inputs) return -EINVAL; @@ -1001,6 +1013,13 @@ int ivtv_s_input(struct file *file, void *fh, unsigned int inp) input type. */ itv->audio_input = itv->card->video_inputs[inp].audio_index; + if (itv->card->video_inputs[inp].video_type == IVTV_CARD_INPUT_VID_TUNER) + std = itv->tuner_std; + else + std = V4L2_STD_ALL; + for (i = 0; i <= IVTV_ENC_STREAM_TYPE_VBI; i++) + itv->streams[i].vdev->tvnorms = std; + /* prevent others from messing with the streams until we're finished changing inputs. */ ivtv_mute(itv); @@ -1048,7 +1067,10 @@ static int ivtv_s_output(struct file *file, void *fh, unsigned int outp) static int ivtv_g_frequency(struct file *file, void *fh, struct v4l2_frequency *vf) { struct ivtv *itv = fh2id(fh)->itv; + struct ivtv_stream *s = &itv->streams[fh2id(fh)->type]; + if (s->vdev->vfl_dir) + return -ENOTTY; if (vf->tuner != 0) return -EINVAL; @@ -1059,7 +1081,10 @@ static int ivtv_g_frequency(struct file *file, void *fh, struct v4l2_frequency * int ivtv_s_frequency(struct file *file, void *fh, struct v4l2_frequency *vf) { struct ivtv *itv = fh2id(fh)->itv; + struct ivtv_stream *s = &itv->streams[fh2id(fh)->type]; + if (s->vdev->vfl_dir) + return -ENOTTY; if (vf->tuner != 0) return -EINVAL; @@ -1247,6 +1272,9 @@ static int ivtv_g_enc_index(struct file *file, void *fh, struct v4l2_enc_idx *id if (entries > V4L2_ENC_IDX_ENTRIES) entries = V4L2_ENC_IDX_ENTRIES; idx->entries = 0; + idx->entries_cap = IVTV_MAX_PGM_INDEX; + if (!atomic_read(&itv->capturing)) + return 0; for (i = 0; i < entries; i++) { *e = itv->pgm_info[(itv->pgm_info_read_idx + i) % IVTV_MAX_PGM_INDEX]; if ((e->flags & V4L2_ENC_IDX_FRAME_MASK) <= V4L2_ENC_IDX_FRAME_B) { @@ -1427,7 +1455,7 @@ static int ivtv_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) return 0; } -static int ivtv_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) +static int ivtv_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *fb) { struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; @@ -1444,7 +1472,7 @@ static int ivtv_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) itv->osd_chroma_key_state = (fb->flags & V4L2_FBUF_FLAG_CHROMAKEY) != 0; ivtv_set_osd_alpha(itv); yi->track_osd = (fb->flags & V4L2_FBUF_FLAG_OVERLAY) != 0; - return ivtv_g_fbuf(file, fh, fb); + return 0; } static int ivtv_overlay(struct file *file, void *fh, unsigned int on) @@ -1460,7 +1488,7 @@ static int ivtv_overlay(struct file *file, void *fh, unsigned int on) return 0; } -static int ivtv_subscribe_event(struct v4l2_fh *fh, struct v4l2_event_subscription *sub) +static int ivtv_subscribe_event(struct v4l2_fh *fh, const struct v4l2_event_subscription *sub) { switch (sub->type) { case V4L2_EVENT_VSYNC: diff --git a/drivers/media/video/ivtv/ivtv-ioctl.h b/drivers/media/pci/ivtv/ivtv-ioctl.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-ioctl.h rename to drivers/media/pci/ivtv/ivtv-ioctl.h diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/pci/ivtv/ivtv-irq.c similarity index 95% rename from drivers/media/video/ivtv/ivtv-irq.c rename to drivers/media/pci/ivtv/ivtv-irq.c index 1b3b9578bf47657915b464e9b9513f48b481aa0e..19a7c9b990a393b93adb27818d069560f1027bda 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/pci/ivtv/ivtv-irq.c @@ -38,6 +38,34 @@ static const int ivtv_stream_map[] = { IVTV_ENC_STREAM_TYPE_VBI, }; +static void ivtv_pcm_work_handler(struct ivtv *itv) +{ + struct ivtv_stream *s = &itv->streams[IVTV_ENC_STREAM_TYPE_PCM]; + struct ivtv_buffer *buf; + + /* Pass the PCM data to ivtv-alsa */ + + while (1) { + /* + * Users should not be using both the ALSA and V4L2 PCM audio + * capture interfaces at the same time. If the user is doing + * this, there maybe a buffer in q_io to grab, use, and put + * back in rotation. + */ + buf = ivtv_dequeue(s, &s->q_io); + if (buf == NULL) + buf = ivtv_dequeue(s, &s->q_full); + if (buf == NULL) + break; + + if (buf->readpos < buf->bytesused) + itv->pcm_announce_callback(itv->alsa, + (u8 *)(buf->buf + buf->readpos), + (size_t)(buf->bytesused - buf->readpos)); + + ivtv_enqueue(s, buf, &s->q_free); + } +} static void ivtv_pio_work_handler(struct ivtv *itv) { @@ -83,6 +111,9 @@ void ivtv_irq_work_handler(struct kthread_work *work) if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_YUV, &itv->i_flags)) ivtv_yuv_work_handler(itv); + + if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PCM, &itv->i_flags)) + ivtv_pcm_work_handler(itv); } /* Determine the required DMA size, setup enough buffers in the predma queue and @@ -293,7 +324,26 @@ static void dma_post(struct ivtv_stream *s) return; } } + ivtv_queue_move(s, &s->q_dma, NULL, &s->q_full, s->q_dma.bytesused); + + if (s->type == IVTV_ENC_STREAM_TYPE_PCM && + itv->pcm_announce_callback != NULL) { + /* + * Set up the work handler to pass the data to ivtv-alsa. + * + * We just use q_full and let the work handler race with users + * making ivtv-fileops.c calls on the PCM device node. + * + * Users should not be using both the ALSA and V4L2 PCM audio + * capture interfaces at the same time. If the user does this, + * fragments of data will just go out each interface as they + * race for PCM data. + */ + set_bit(IVTV_F_I_WORK_HANDLER_PCM, &itv->i_flags); + set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags); + } + if (s->fh) wake_up(&s->waitq); } diff --git a/drivers/media/video/ivtv/ivtv-irq.h b/drivers/media/pci/ivtv/ivtv-irq.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-irq.h rename to drivers/media/pci/ivtv/ivtv-irq.h diff --git a/drivers/media/video/ivtv/ivtv-mailbox.c b/drivers/media/pci/ivtv/ivtv-mailbox.c similarity index 100% rename from drivers/media/video/ivtv/ivtv-mailbox.c rename to drivers/media/pci/ivtv/ivtv-mailbox.c diff --git a/drivers/media/video/ivtv/ivtv-mailbox.h b/drivers/media/pci/ivtv/ivtv-mailbox.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-mailbox.h rename to drivers/media/pci/ivtv/ivtv-mailbox.h diff --git a/drivers/media/video/ivtv/ivtv-queue.c b/drivers/media/pci/ivtv/ivtv-queue.c similarity index 100% rename from drivers/media/video/ivtv/ivtv-queue.c rename to drivers/media/pci/ivtv/ivtv-queue.c diff --git a/drivers/media/video/ivtv/ivtv-queue.h b/drivers/media/pci/ivtv/ivtv-queue.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-queue.h rename to drivers/media/pci/ivtv/ivtv-queue.h diff --git a/drivers/media/video/ivtv/ivtv-routing.c b/drivers/media/pci/ivtv/ivtv-routing.c similarity index 100% rename from drivers/media/video/ivtv/ivtv-routing.c rename to drivers/media/pci/ivtv/ivtv-routing.c diff --git a/drivers/media/video/ivtv/ivtv-routing.h b/drivers/media/pci/ivtv/ivtv-routing.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-routing.h rename to drivers/media/pci/ivtv/ivtv-routing.h diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/pci/ivtv/ivtv-streams.c similarity index 95% rename from drivers/media/video/ivtv/ivtv-streams.c rename to drivers/media/pci/ivtv/ivtv-streams.c index 87990c5f0910331d9f692fa7cbd828ada8325a77..70dad588a677ca45b9b08ee8d4ab6d967add0185 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/pci/ivtv/ivtv-streams.c @@ -65,6 +65,14 @@ static const struct v4l2_file_operations ivtv_v4l2_dec_fops = { .poll = ivtv_v4l2_dec_poll, }; +static const struct v4l2_file_operations ivtv_v4l2_radio_fops = { + .owner = THIS_MODULE, + .open = ivtv_v4l2_open, + .unlocked_ioctl = video_ioctl2, + .release = ivtv_v4l2_close, + .poll = ivtv_v4l2_enc_poll, +}; + #define IVTV_V4L2_DEC_MPG_OFFSET 16 /* offset from 0 to register decoder mpg v4l2 minors on */ #define IVTV_V4L2_ENC_PCM_OFFSET 24 /* offset from 0 to register pcm v4l2 minors on */ #define IVTV_V4L2_ENC_YUV_OFFSET 32 /* offset from 0 to register yuv v4l2 minors on */ @@ -77,14 +85,13 @@ static struct { int vfl_type; int num_offset; int dma, pio; - enum v4l2_buf_type buf_type; u32 v4l2_caps; const struct v4l2_file_operations *fops; } ivtv_stream_info[] = { { /* IVTV_ENC_STREAM_TYPE_MPG */ "encoder MPG", VFL_TYPE_GRABBER, 0, - PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_VIDEO_CAPTURE, + PCI_DMA_FROMDEVICE, 0, V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops @@ -92,7 +99,7 @@ static struct { { /* IVTV_ENC_STREAM_TYPE_YUV */ "encoder YUV", VFL_TYPE_GRABBER, IVTV_V4L2_ENC_YUV_OFFSET, - PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_VIDEO_CAPTURE, + PCI_DMA_FROMDEVICE, 0, V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops @@ -100,7 +107,7 @@ static struct { { /* IVTV_ENC_STREAM_TYPE_VBI */ "encoder VBI", VFL_TYPE_VBI, 0, - PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_VBI_CAPTURE, + PCI_DMA_FROMDEVICE, 0, V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE | V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops @@ -108,42 +115,42 @@ static struct { { /* IVTV_ENC_STREAM_TYPE_PCM */ "encoder PCM", VFL_TYPE_GRABBER, IVTV_V4L2_ENC_PCM_OFFSET, - PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_PRIVATE, + PCI_DMA_FROMDEVICE, 0, V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops }, { /* IVTV_ENC_STREAM_TYPE_RAD */ "encoder radio", VFL_TYPE_RADIO, 0, - PCI_DMA_NONE, 1, V4L2_BUF_TYPE_PRIVATE, + PCI_DMA_NONE, 1, V4L2_CAP_RADIO | V4L2_CAP_TUNER, - &ivtv_v4l2_enc_fops + &ivtv_v4l2_radio_fops }, { /* IVTV_DEC_STREAM_TYPE_MPG */ "decoder MPG", VFL_TYPE_GRABBER, IVTV_V4L2_DEC_MPG_OFFSET, - PCI_DMA_TODEVICE, 0, V4L2_BUF_TYPE_VIDEO_OUTPUT, + PCI_DMA_TODEVICE, 0, V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_dec_fops }, { /* IVTV_DEC_STREAM_TYPE_VBI */ "decoder VBI", VFL_TYPE_VBI, IVTV_V4L2_DEC_VBI_OFFSET, - PCI_DMA_NONE, 1, V4L2_BUF_TYPE_VBI_CAPTURE, + PCI_DMA_NONE, 1, V4L2_CAP_SLICED_VBI_CAPTURE | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops }, { /* IVTV_DEC_STREAM_TYPE_VOUT */ "decoder VOUT", VFL_TYPE_VBI, IVTV_V4L2_DEC_VOUT_OFFSET, - PCI_DMA_NONE, 1, V4L2_BUF_TYPE_VBI_OUTPUT, + PCI_DMA_NONE, 1, V4L2_CAP_SLICED_VBI_OUTPUT | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_dec_fops }, { /* IVTV_DEC_STREAM_TYPE_YUV */ "decoder YUV", VFL_TYPE_GRABBER, IVTV_V4L2_DEC_YUV_OFFSET, - PCI_DMA_TODEVICE, 0, V4L2_BUF_TYPE_VIDEO_OUTPUT, + PCI_DMA_TODEVICE, 0, V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_dec_fops } @@ -223,15 +230,27 @@ static int ivtv_prep_dev(struct ivtv *itv, int type) s->vdev->num = num; s->vdev->v4l2_dev = &itv->v4l2_dev; + if (ivtv_stream_info[type].v4l2_caps & + (V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_SLICED_VBI_OUTPUT)) + s->vdev->vfl_dir = VFL_DIR_TX; s->vdev->fops = ivtv_stream_info[type].fops; s->vdev->ctrl_handler = itv->v4l2_dev.ctrl_handler; s->vdev->release = video_device_release; s->vdev->tvnorms = V4L2_STD_ALL; s->vdev->lock = &itv->serialize_lock; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &s->vdev->flags); + if (s->type == IVTV_DEC_STREAM_TYPE_VBI) { + v4l2_disable_ioctl(s->vdev, VIDIOC_S_AUDIO); + v4l2_disable_ioctl(s->vdev, VIDIOC_G_AUDIO); + v4l2_disable_ioctl(s->vdev, VIDIOC_ENUMAUDIO); + v4l2_disable_ioctl(s->vdev, VIDIOC_ENUMINPUT); + v4l2_disable_ioctl(s->vdev, VIDIOC_S_INPUT); + v4l2_disable_ioctl(s->vdev, VIDIOC_G_INPUT); + v4l2_disable_ioctl(s->vdev, VIDIOC_S_FREQUENCY); + v4l2_disable_ioctl(s->vdev, VIDIOC_G_FREQUENCY); + v4l2_disable_ioctl(s->vdev, VIDIOC_S_TUNER); + v4l2_disable_ioctl(s->vdev, VIDIOC_G_TUNER); + v4l2_disable_ioctl(s->vdev, VIDIOC_S_STD); + } set_bit(V4L2_FL_USE_FH_PRIO, &s->vdev->flags); ivtv_set_funcs(s->vdev); return 0; @@ -633,6 +652,7 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s) atomic_inc(&itv->capturing); return 0; } +EXPORT_SYMBOL(ivtv_start_v4l2_encode_stream); static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s) { @@ -889,6 +909,7 @@ int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end) return 0; } +EXPORT_SYMBOL(ivtv_stop_v4l2_encode_stream); int ivtv_stop_v4l2_decode_stream(struct ivtv_stream *s, int flags, u64 pts) { diff --git a/drivers/media/video/ivtv/ivtv-streams.h b/drivers/media/pci/ivtv/ivtv-streams.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-streams.h rename to drivers/media/pci/ivtv/ivtv-streams.h diff --git a/drivers/media/video/ivtv/ivtv-udma.c b/drivers/media/pci/ivtv/ivtv-udma.c similarity index 100% rename from drivers/media/video/ivtv/ivtv-udma.c rename to drivers/media/pci/ivtv/ivtv-udma.c diff --git a/drivers/media/video/ivtv/ivtv-udma.h b/drivers/media/pci/ivtv/ivtv-udma.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-udma.h rename to drivers/media/pci/ivtv/ivtv-udma.h diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/pci/ivtv/ivtv-vbi.c similarity index 100% rename from drivers/media/video/ivtv/ivtv-vbi.c rename to drivers/media/pci/ivtv/ivtv-vbi.c diff --git a/drivers/media/video/ivtv/ivtv-vbi.h b/drivers/media/pci/ivtv/ivtv-vbi.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-vbi.h rename to drivers/media/pci/ivtv/ivtv-vbi.h diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/pci/ivtv/ivtv-version.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-version.h rename to drivers/media/pci/ivtv/ivtv-version.h diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c similarity index 100% rename from drivers/media/video/ivtv/ivtv-yuv.c rename to drivers/media/pci/ivtv/ivtv-yuv.c diff --git a/drivers/media/video/ivtv/ivtv-yuv.h b/drivers/media/pci/ivtv/ivtv-yuv.h similarity index 100% rename from drivers/media/video/ivtv/ivtv-yuv.h rename to drivers/media/pci/ivtv/ivtv-yuv.h diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/pci/ivtv/ivtvfb.c similarity index 100% rename from drivers/media/video/ivtv/ivtvfb.c rename to drivers/media/pci/ivtv/ivtvfb.c diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/pci/mantis/Kconfig similarity index 62% rename from drivers/media/dvb/mantis/Kconfig rename to drivers/media/pci/mantis/Kconfig index a13a50503134bbb1c9531b6140308ed8c6f83265..d3cc21633b94b7257257c0b8636eafa37ce9f45b 100644 --- a/drivers/media/dvb/mantis/Kconfig +++ b/drivers/media/pci/mantis/Kconfig @@ -10,15 +10,15 @@ config MANTIS_CORE config DVB_MANTIS tristate "MANTIS based cards" depends on MANTIS_CORE && DVB_CORE && PCI && I2C - select DVB_MB86A16 if !DVB_FE_CUSTOMISE - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_LNBP21 if !DVB_FE_CUSTOMISE - select DVB_STB0899 if !DVB_FE_CUSTOMISE - select DVB_STB6100 if !DVB_FE_CUSTOMISE - select DVB_TDA665x if !DVB_FE_CUSTOMISE - select DVB_TDA10021 if !DVB_FE_CUSTOMISE - select DVB_TDA10023 if !DVB_FE_CUSTOMISE + select DVB_MB86A16 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA665x if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10021 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT select DVB_PLL help Support for PCI cards based on the Mantis PCI bridge. @@ -29,7 +29,7 @@ config DVB_MANTIS config DVB_HOPPER tristate "HOPPER based cards" depends on MANTIS_CORE && DVB_CORE && PCI && I2C - select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT select DVB_PLL help Support for PCI cards based on the Hopper PCI bridge. diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/pci/mantis/Makefile similarity index 88% rename from drivers/media/dvb/mantis/Makefile rename to drivers/media/pci/mantis/Makefile index ec8116dcb368cea9f43bebe1bc1e28f8f64915c0..f715051e4453bfd6a5319146d84913f5c982fe54 100644 --- a/drivers/media/dvb/mantis/Makefile +++ b/drivers/media/pci/mantis/Makefile @@ -25,4 +25,4 @@ obj-$(CONFIG_MANTIS_CORE) += mantis_core.o obj-$(CONFIG_DVB_MANTIS) += mantis.o obj-$(CONFIG_DVB_HOPPER) += hopper.o -ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ +ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends/ diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/pci/mantis/hopper_cards.c similarity index 100% rename from drivers/media/dvb/mantis/hopper_cards.c rename to drivers/media/pci/mantis/hopper_cards.c diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/pci/mantis/hopper_vp3028.c similarity index 100% rename from drivers/media/dvb/mantis/hopper_vp3028.c rename to drivers/media/pci/mantis/hopper_vp3028.c diff --git a/drivers/media/dvb/mantis/hopper_vp3028.h b/drivers/media/pci/mantis/hopper_vp3028.h similarity index 100% rename from drivers/media/dvb/mantis/hopper_vp3028.h rename to drivers/media/pci/mantis/hopper_vp3028.h diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/pci/mantis/mantis_ca.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_ca.c rename to drivers/media/pci/mantis/mantis_ca.c diff --git a/drivers/media/dvb/mantis/mantis_ca.h b/drivers/media/pci/mantis/mantis_ca.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_ca.h rename to drivers/media/pci/mantis/mantis_ca.h diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/pci/mantis/mantis_cards.c similarity index 99% rename from drivers/media/dvb/mantis/mantis_cards.c rename to drivers/media/pci/mantis/mantis_cards.c index 095cf3a994e2d958620e2cbd5f93eb5b2d7e2cbd..0207d1f064e080ea2739a8c1a47d6d5a95c6dbcd 100644 --- a/drivers/media/dvb/mantis/mantis_cards.c +++ b/drivers/media/pci/mantis/mantis_cards.c @@ -275,7 +275,7 @@ static struct pci_device_id mantis_pci_table[] = { MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config), MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config), MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config), - MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2033_config), + MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2040_config), MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config), { } }; diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/pci/mantis/mantis_common.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_common.h rename to drivers/media/pci/mantis/mantis_common.h diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/pci/mantis/mantis_core.c similarity index 99% rename from drivers/media/dvb/mantis/mantis_core.c rename to drivers/media/pci/mantis/mantis_core.c index 22524a8e6f61ec735773bab8d8a7f610b7319ec1..684d9061fe2aced0c817a6c1191c1226be5aa3d5 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/pci/mantis/mantis_core.c @@ -121,7 +121,7 @@ static void mantis_load_config(struct mantis_pci *mantis) mantis->hwconfig = &vp2033_mantis_config; break; case MANTIS_VP_2040_DVB_C: /* VP-2040 */ - case TERRATEC_CINERGY_C_PCI: /* VP-2040 clone */ + case CINERGY_C: /* VP-2040 clone */ case TECHNISAT_CABLESTAR_HD2: mantis->hwconfig = &vp2040_mantis_config; break; diff --git a/drivers/media/dvb/mantis/mantis_core.h b/drivers/media/pci/mantis/mantis_core.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_core.h rename to drivers/media/pci/mantis/mantis_core.h diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/pci/mantis/mantis_dma.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_dma.c rename to drivers/media/pci/mantis/mantis_dma.c diff --git a/drivers/media/dvb/mantis/mantis_dma.h b/drivers/media/pci/mantis/mantis_dma.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_dma.h rename to drivers/media/pci/mantis/mantis_dma.h diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/pci/mantis/mantis_dvb.c similarity index 98% rename from drivers/media/dvb/mantis/mantis_dvb.c rename to drivers/media/pci/mantis/mantis_dvb.c index e5180e45d3100e72d8b0bb26758beccdca5a4b6d..5d15c6b74d9be621bb5cb8fecfae9ad50512804f 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/pci/mantis/mantis_dvb.c @@ -248,8 +248,10 @@ int __devinit mantis_dvb_init(struct mantis_pci *mantis) err5: tasklet_kill(&mantis->tasklet); dvb_net_release(&mantis->dvbnet); - dvb_unregister_frontend(mantis->fe); - dvb_frontend_detach(mantis->fe); + if (mantis->fe) { + dvb_unregister_frontend(mantis->fe); + dvb_frontend_detach(mantis->fe); + } err4: mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); diff --git a/drivers/media/dvb/mantis/mantis_dvb.h b/drivers/media/pci/mantis/mantis_dvb.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_dvb.h rename to drivers/media/pci/mantis/mantis_dvb.h diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/pci/mantis/mantis_evm.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_evm.c rename to drivers/media/pci/mantis/mantis_evm.c diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/pci/mantis/mantis_hif.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_hif.c rename to drivers/media/pci/mantis/mantis_hif.c diff --git a/drivers/media/dvb/mantis/mantis_hif.h b/drivers/media/pci/mantis/mantis_hif.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_hif.h rename to drivers/media/pci/mantis/mantis_hif.h diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/pci/mantis/mantis_i2c.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_i2c.c rename to drivers/media/pci/mantis/mantis_i2c.c diff --git a/drivers/media/dvb/mantis/mantis_i2c.h b/drivers/media/pci/mantis/mantis_i2c.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_i2c.h rename to drivers/media/pci/mantis/mantis_i2c.h diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/pci/mantis/mantis_input.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_input.c rename to drivers/media/pci/mantis/mantis_input.c diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/pci/mantis/mantis_ioc.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_ioc.c rename to drivers/media/pci/mantis/mantis_ioc.c diff --git a/drivers/media/dvb/mantis/mantis_ioc.h b/drivers/media/pci/mantis/mantis_ioc.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_ioc.h rename to drivers/media/pci/mantis/mantis_ioc.h diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/pci/mantis/mantis_link.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_link.h rename to drivers/media/pci/mantis/mantis_link.h diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/pci/mantis/mantis_pci.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_pci.c rename to drivers/media/pci/mantis/mantis_pci.c diff --git a/drivers/media/dvb/mantis/mantis_pci.h b/drivers/media/pci/mantis/mantis_pci.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_pci.h rename to drivers/media/pci/mantis/mantis_pci.h diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/pci/mantis/mantis_pcmcia.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_pcmcia.c rename to drivers/media/pci/mantis/mantis_pcmcia.c diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/pci/mantis/mantis_reg.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_reg.h rename to drivers/media/pci/mantis/mantis_reg.h diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/pci/mantis/mantis_uart.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_uart.c rename to drivers/media/pci/mantis/mantis_uart.c diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/pci/mantis/mantis_uart.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_uart.h rename to drivers/media/pci/mantis/mantis_uart.h diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/pci/mantis/mantis_vp1033.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp1033.c rename to drivers/media/pci/mantis/mantis_vp1033.c diff --git a/drivers/media/dvb/mantis/mantis_vp1033.h b/drivers/media/pci/mantis/mantis_vp1033.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp1033.h rename to drivers/media/pci/mantis/mantis_vp1033.h diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/pci/mantis/mantis_vp1034.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp1034.c rename to drivers/media/pci/mantis/mantis_vp1034.c diff --git a/drivers/media/dvb/mantis/mantis_vp1034.h b/drivers/media/pci/mantis/mantis_vp1034.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp1034.h rename to drivers/media/pci/mantis/mantis_vp1034.h diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/pci/mantis/mantis_vp1041.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp1041.c rename to drivers/media/pci/mantis/mantis_vp1041.c diff --git a/drivers/media/dvb/mantis/mantis_vp1041.h b/drivers/media/pci/mantis/mantis_vp1041.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp1041.h rename to drivers/media/pci/mantis/mantis_vp1041.h diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/pci/mantis/mantis_vp2033.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp2033.c rename to drivers/media/pci/mantis/mantis_vp2033.c diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/pci/mantis/mantis_vp2033.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp2033.h rename to drivers/media/pci/mantis/mantis_vp2033.h diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/pci/mantis/mantis_vp2040.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp2040.c rename to drivers/media/pci/mantis/mantis_vp2040.c diff --git a/drivers/media/dvb/mantis/mantis_vp2040.h b/drivers/media/pci/mantis/mantis_vp2040.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp2040.h rename to drivers/media/pci/mantis/mantis_vp2040.h diff --git a/drivers/media/dvb/mantis/mantis_vp3028.c b/drivers/media/pci/mantis/mantis_vp3028.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp3028.c rename to drivers/media/pci/mantis/mantis_vp3028.c diff --git a/drivers/media/dvb/mantis/mantis_vp3028.h b/drivers/media/pci/mantis/mantis_vp3028.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp3028.h rename to drivers/media/pci/mantis/mantis_vp3028.h diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/pci/mantis/mantis_vp3030.c similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp3030.c rename to drivers/media/pci/mantis/mantis_vp3030.c diff --git a/drivers/media/dvb/mantis/mantis_vp3030.h b/drivers/media/pci/mantis/mantis_vp3030.h similarity index 100% rename from drivers/media/dvb/mantis/mantis_vp3030.h rename to drivers/media/pci/mantis/mantis_vp3030.h diff --git a/drivers/media/pci/meye/Kconfig b/drivers/media/pci/meye/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..b4bf848be5a031b6d7ae7fa16b938ec1659919d7 --- /dev/null +++ b/drivers/media/pci/meye/Kconfig @@ -0,0 +1,13 @@ +config VIDEO_MEYE + tristate "Sony Vaio Picturebook Motion Eye Video For Linux" + depends on PCI && SONY_LAPTOP && VIDEO_V4L2 + ---help--- + This is the video4linux driver for the Motion Eye camera found + in the Vaio Picturebook laptops. Please read the material in + for more information. + + If you say Y or M here, you need to say Y or M to "Sony Laptop + Extras" in the misc device section. + + To compile this driver as a module, choose M here: the + module will be called meye. diff --git a/drivers/media/pci/meye/Makefile b/drivers/media/pci/meye/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..49388518cd01302932367a13af57108eebc71513 --- /dev/null +++ b/drivers/media/pci/meye/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_VIDEO_MEYE) += meye.o diff --git a/drivers/media/video/meye.c b/drivers/media/pci/meye/meye.c similarity index 100% rename from drivers/media/video/meye.c rename to drivers/media/pci/meye/meye.c diff --git a/drivers/media/video/meye.h b/drivers/media/pci/meye/meye.h similarity index 100% rename from drivers/media/video/meye.h rename to drivers/media/pci/meye/meye.h diff --git a/drivers/media/pci/ngene/Kconfig b/drivers/media/pci/ngene/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..637d506b23c51a4223605279bbf2fec65cc77020 --- /dev/null +++ b/drivers/media/pci/ngene/Kconfig @@ -0,0 +1,13 @@ +config DVB_NGENE + tristate "Micronas nGene support" + depends on DVB_CORE && PCI && I2C + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + Support for Micronas PCI express cards with nGene bridge. + diff --git a/drivers/media/dvb/ngene/Makefile b/drivers/media/pci/ngene/Makefile similarity index 63% rename from drivers/media/dvb/ngene/Makefile rename to drivers/media/pci/ngene/Makefile index 13ebeffb705ffeee530c91e5859ef22e1512b66f..5c0b5d6b9d69b773f93b9d133f874ef75143fcb7 100644 --- a/drivers/media/dvb/ngene/Makefile +++ b/drivers/media/pci/ngene/Makefile @@ -6,9 +6,9 @@ ngene-objs := ngene-core.o ngene-i2c.o ngene-cards.o ngene-dvb.o obj-$(CONFIG_DVB_NGENE) += ngene.o -ccflags-y += -Idrivers/media/dvb/dvb-core/ -ccflags-y += -Idrivers/media/dvb/frontends/ -ccflags-y += -Idrivers/media/common/tuners/ +ccflags-y += -Idrivers/media/dvb-core/ +ccflags-y += -Idrivers/media/dvb-frontends/ +ccflags-y += -Idrivers/media/tuners/ # For the staging CI driver cxd2099 ccflags-y += -Idrivers/staging/media/cxd2099/ diff --git a/drivers/media/dvb/ngene/ngene-cards.c b/drivers/media/pci/ngene/ngene-cards.c similarity index 71% rename from drivers/media/dvb/ngene/ngene-cards.c rename to drivers/media/pci/ngene/ngene-cards.c index 72ee8de0226025618ecd733716fa30f494eb646b..a6cd6959ad192a6207d96add36c69d6691ed3291 100644 --- a/drivers/media/dvb/ngene/ngene-cards.c +++ b/drivers/media/pci/ngene/ngene-cards.c @@ -42,6 +42,8 @@ #include "mt2131.h" #include "tda18271c2dd.h" #include "drxk.h" +#include "drxd.h" +#include "dvb-pll.h" /****************************************************************************/ @@ -313,6 +315,235 @@ static int demod_attach_lg330x(struct ngene_channel *chan) return (chan->fe) ? 0 : -ENODEV; } +static int demod_attach_drxd(struct ngene_channel *chan) +{ + struct drxd_config *feconf; + + feconf = chan->dev->card_info->fe_config[chan->number]; + + chan->fe = dvb_attach(drxd_attach, feconf, chan, + &chan->i2c_adapter, &chan->dev->pci_dev->dev); + if (!chan->fe) { + pr_err("No DRXD found!\n"); + return -ENODEV; + } + + if (!dvb_attach(dvb_pll_attach, chan->fe, feconf->pll_address, + &chan->i2c_adapter, + feconf->pll_type)) { + pr_err("No pll(%d) found!\n", feconf->pll_type); + return -ENODEV; + } + return 0; +} + +/****************************************************************************/ +/* EEPROM TAGS **************************************************************/ +/****************************************************************************/ + +#define MICNG_EE_START 0x0100 +#define MICNG_EE_END 0x0FF0 + +#define MICNG_EETAG_END0 0x0000 +#define MICNG_EETAG_END1 0xFFFF + +/* 0x0001 - 0x000F reserved for housekeeping */ +/* 0xFFFF - 0xFFFE reserved for housekeeping */ + +/* Micronas assigned tags + EEProm tags for hardware support */ + +#define MICNG_EETAG_DRXD1_OSCDEVIATION 0x1000 /* 2 Bytes data */ +#define MICNG_EETAG_DRXD2_OSCDEVIATION 0x1001 /* 2 Bytes data */ + +#define MICNG_EETAG_MT2060_1_1STIF 0x1100 /* 2 Bytes data */ +#define MICNG_EETAG_MT2060_2_1STIF 0x1101 /* 2 Bytes data */ + +/* Tag range for OEMs */ + +#define MICNG_EETAG_OEM_FIRST 0xC000 +#define MICNG_EETAG_OEM_LAST 0xFFEF + +static int i2c_write_eeprom(struct i2c_adapter *adapter, + u8 adr, u16 reg, u8 data) +{ + u8 m[3] = {(reg >> 8), (reg & 0xff), data}; + struct i2c_msg msg = {.addr = adr, .flags = 0, .buf = m, + .len = sizeof(m)}; + + if (i2c_transfer(adapter, &msg, 1) != 1) { + pr_err(DEVICE_NAME ": Error writing EEPROM!\n"); + return -EIO; + } + return 0; +} + +static int i2c_read_eeprom(struct i2c_adapter *adapter, + u8 adr, u16 reg, u8 *data, int len) +{ + u8 msg[2] = {(reg >> 8), (reg & 0xff)}; + struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0, + .buf = msg, .len = 2 }, + {.addr = adr, .flags = I2C_M_RD, + .buf = data, .len = len} }; + + if (i2c_transfer(adapter, msgs, 2) != 2) { + pr_err(DEVICE_NAME ": Error reading EEPROM\n"); + return -EIO; + } + return 0; +} + +static int ReadEEProm(struct i2c_adapter *adapter, + u16 Tag, u32 MaxLen, u8 *data, u32 *pLength) +{ + int status = 0; + u16 Addr = MICNG_EE_START, Length, tag = 0; + u8 EETag[3]; + + while (Addr + sizeof(u16) + 1 < MICNG_EE_END) { + if (i2c_read_eeprom(adapter, 0x50, Addr, EETag, sizeof(EETag))) + return -1; + tag = (EETag[0] << 8) | EETag[1]; + if (tag == MICNG_EETAG_END0 || tag == MICNG_EETAG_END1) + return -1; + if (tag == Tag) + break; + Addr += sizeof(u16) + 1 + EETag[2]; + } + if (Addr + sizeof(u16) + 1 + EETag[2] > MICNG_EE_END) { + pr_err(DEVICE_NAME + ": Reached EOEE @ Tag = %04x Length = %3d\n", + tag, EETag[2]); + return -1; + } + Length = EETag[2]; + if (Length > MaxLen) + Length = (u16) MaxLen; + if (Length > 0) { + Addr += sizeof(u16) + 1; + status = i2c_read_eeprom(adapter, 0x50, Addr, data, Length); + if (!status) { + *pLength = EETag[2]; + if (Length < EETag[2]) + ; /*status=STATUS_BUFFER_OVERFLOW; */ + } + } + return status; +} + +static int WriteEEProm(struct i2c_adapter *adapter, + u16 Tag, u32 Length, u8 *data) +{ + int status = 0; + u16 Addr = MICNG_EE_START; + u8 EETag[3]; + u16 tag = 0; + int retry, i; + + while (Addr + sizeof(u16) + 1 < MICNG_EE_END) { + if (i2c_read_eeprom(adapter, 0x50, Addr, EETag, sizeof(EETag))) + return -1; + tag = (EETag[0] << 8) | EETag[1]; + if (tag == MICNG_EETAG_END0 || tag == MICNG_EETAG_END1) + return -1; + if (tag == Tag) + break; + Addr += sizeof(u16) + 1 + EETag[2]; + } + if (Addr + sizeof(u16) + 1 + EETag[2] > MICNG_EE_END) { + pr_err(DEVICE_NAME + ": Reached EOEE @ Tag = %04x Length = %3d\n", + tag, EETag[2]); + return -1; + } + + if (Length > EETag[2]) + return -EINVAL; + /* Note: We write the data one byte at a time to avoid + issues with page sizes. (which are different for + each manufacture and eeprom size) + */ + Addr += sizeof(u16) + 1; + for (i = 0; i < Length; i++, Addr++) { + status = i2c_write_eeprom(adapter, 0x50, Addr, data[i]); + + if (status) + break; + + /* Poll for finishing write cycle */ + retry = 10; + while (retry) { + u8 Tmp; + + msleep(50); + status = i2c_read_eeprom(adapter, 0x50, Addr, &Tmp, 1); + if (status) + break; + if (Tmp != data[i]) + pr_err(DEVICE_NAME + "eeprom write error\n"); + retry -= 1; + } + if (status) { + pr_err(DEVICE_NAME + ": Timeout polling eeprom\n"); + break; + } + } + return status; +} + +static int eeprom_read_ushort(struct i2c_adapter *adapter, u16 tag, u16 *data) +{ + int stat; + u8 buf[2]; + u32 len = 0; + + stat = ReadEEProm(adapter, tag, 2, buf, &len); + if (stat) + return stat; + if (len != 2) + return -EINVAL; + + *data = (buf[0] << 8) | buf[1]; + return 0; +} + +static int eeprom_write_ushort(struct i2c_adapter *adapter, u16 tag, u16 data) +{ + int stat; + u8 buf[2]; + + buf[0] = data >> 8; + buf[1] = data & 0xff; + stat = WriteEEProm(adapter, tag, 2, buf); + if (stat) + return stat; + return 0; +} + +static s16 osc_deviation(void *priv, s16 deviation, int flag) +{ + struct ngene_channel *chan = priv; + struct i2c_adapter *adap = &chan->i2c_adapter; + u16 data = 0; + + if (flag) { + data = (u16) deviation; + pr_info(DEVICE_NAME ": write deviation %d\n", + deviation); + eeprom_write_ushort(adap, 0x1000 + chan->number, data); + } else { + if (eeprom_read_ushort(adap, 0x1000 + chan->number, &data)) + data = 0; + pr_info(DEVICE_NAME ": read deviation %d\n", + (s16) data); + } + + return (s16) data; +} + /****************************************************************************/ /* Switch control (I2C gates, etc.) *****************************************/ /****************************************************************************/ @@ -464,6 +695,37 @@ static struct ngene_info ngene_info_m780 = { .fw_version = 15, }; +static struct drxd_config fe_terratec_dvbt_0 = { + .index = 0, + .demod_address = 0x70, + .demod_revision = 0xa2, + .demoda_address = 0x00, + .pll_address = 0x60, + .pll_type = DVB_PLL_THOMSON_DTT7520X, + .clock = 20000, + .osc_deviation = osc_deviation, +}; + +static struct drxd_config fe_terratec_dvbt_1 = { + .index = 1, + .demod_address = 0x71, + .demod_revision = 0xa2, + .demoda_address = 0x00, + .pll_address = 0x60, + .pll_type = DVB_PLL_THOMSON_DTT7520X, + .clock = 20000, + .osc_deviation = osc_deviation, +}; + +static struct ngene_info ngene_info_terratec = { + .type = NGENE_TERRATEC, + .name = "Terratec Integra/Cinergy2400i Dual DVB-T", + .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN}, + .demod_attach = {demod_attach_drxd, demod_attach_drxd}, + .fe_config = {&fe_terratec_dvbt_0, &fe_terratec_dvbt_1}, + .i2c_access = 1, +}; + /****************************************************************************/ @@ -488,6 +750,7 @@ static const struct pci_device_id ngene_id_tbl[] __devinitdata = { NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlex), NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlex), NGENE_ID(0x1461, 0x062e, ngene_info_m780), + NGENE_ID(0x153b, 0x1167, ngene_info_terratec), {0} }; MODULE_DEVICE_TABLE(pci, ngene_id_tbl); diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/pci/ngene/ngene-core.c similarity index 98% rename from drivers/media/dvb/ngene/ngene-core.c rename to drivers/media/pci/ngene/ngene-core.c index 39857384af1072d6295938ab1ca504404f5c6208..c8e0d5b99d4c0d106bd02078ab1b678176d57b0d 100644 --- a/drivers/media/dvb/ngene/ngene-core.c +++ b/drivers/media/pci/ngene/ngene-core.c @@ -258,22 +258,16 @@ static void dump_command_io(struct ngene *dev) u8 buf[8], *b; ngcpyfrom(buf, HOST_TO_NGENE, 8); - printk(KERN_ERR "host_to_ngene (%04x): %02x %02x %02x %02x %02x %02x %02x %02x\n", - HOST_TO_NGENE, buf[0], buf[1], buf[2], buf[3], - buf[4], buf[5], buf[6], buf[7]); + printk(KERN_ERR "host_to_ngene (%04x): %*ph\n", HOST_TO_NGENE, 8, buf); ngcpyfrom(buf, NGENE_TO_HOST, 8); - printk(KERN_ERR "ngene_to_host (%04x): %02x %02x %02x %02x %02x %02x %02x %02x\n", - NGENE_TO_HOST, buf[0], buf[1], buf[2], buf[3], - buf[4], buf[5], buf[6], buf[7]); + printk(KERN_ERR "ngene_to_host (%04x): %*ph\n", NGENE_TO_HOST, 8, buf); b = dev->hosttongene; - printk(KERN_ERR "dev->hosttongene (%p): %02x %02x %02x %02x %02x %02x %02x %02x\n", - b, b[0], b[1], b[2], b[3], b[4], b[5], b[6], b[7]); + printk(KERN_ERR "dev->hosttongene (%p): %*ph\n", b, 8, b); b = dev->ngenetohost; - printk(KERN_ERR "dev->ngenetohost (%p): %02x %02x %02x %02x %02x %02x %02x %02x\n", - b, b[0], b[1], b[2], b[3], b[4], b[5], b[6], b[7]); + printk(KERN_ERR "dev->ngenetohost (%p): %*ph\n", b, 8, b); } static int ngene_command_mutex(struct ngene *dev, struct ngene_command *com) diff --git a/drivers/media/dvb/ngene/ngene-dvb.c b/drivers/media/pci/ngene/ngene-dvb.c similarity index 100% rename from drivers/media/dvb/ngene/ngene-dvb.c rename to drivers/media/pci/ngene/ngene-dvb.c diff --git a/drivers/media/dvb/ngene/ngene-i2c.c b/drivers/media/pci/ngene/ngene-i2c.c similarity index 100% rename from drivers/media/dvb/ngene/ngene-i2c.c rename to drivers/media/pci/ngene/ngene-i2c.c diff --git a/drivers/media/dvb/ngene/ngene.h b/drivers/media/pci/ngene/ngene.h similarity index 100% rename from drivers/media/dvb/ngene/ngene.h rename to drivers/media/pci/ngene/ngene.h diff --git a/drivers/media/dvb/pluto2/Kconfig b/drivers/media/pci/pluto2/Kconfig similarity index 100% rename from drivers/media/dvb/pluto2/Kconfig rename to drivers/media/pci/pluto2/Kconfig diff --git a/drivers/media/pci/pluto2/Makefile b/drivers/media/pci/pluto2/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..524bf841f42b80b07875f6a1864b321b3af8e44e --- /dev/null +++ b/drivers/media/pci/pluto2/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_DVB_PLUTO2) += pluto2.o + +ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends/ diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/pci/pluto2/pluto2.c similarity index 100% rename from drivers/media/dvb/pluto2/pluto2.c rename to drivers/media/pci/pluto2/pluto2.c diff --git a/drivers/media/dvb/pt1/Kconfig b/drivers/media/pci/pt1/Kconfig similarity index 100% rename from drivers/media/dvb/pt1/Kconfig rename to drivers/media/pci/pt1/Kconfig diff --git a/drivers/media/dvb/pt1/Makefile b/drivers/media/pci/pt1/Makefile similarity index 56% rename from drivers/media/dvb/pt1/Makefile rename to drivers/media/pci/pt1/Makefile index d80d8e8e7c572b7218bd1103e669ab50ed352f97..98e391295afeb676e72c702c77cd18229a96f2c2 100644 --- a/drivers/media/dvb/pt1/Makefile +++ b/drivers/media/pci/pt1/Makefile @@ -2,4 +2,4 @@ earth-pt1-objs := pt1.o va1j5jf8007s.o va1j5jf8007t.o obj-$(CONFIG_DVB_PT1) += earth-pt1.o -ccflags-y += -Idrivers/media/dvb/dvb-core -Idrivers/media/dvb/frontends +ccflags-y += -Idrivers/media/dvb-core -Idrivers/media/dvb-frontends diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/pci/pt1/pt1.c similarity index 100% rename from drivers/media/dvb/pt1/pt1.c rename to drivers/media/pci/pt1/pt1.c diff --git a/drivers/media/dvb/pt1/va1j5jf8007s.c b/drivers/media/pci/pt1/va1j5jf8007s.c similarity index 98% rename from drivers/media/dvb/pt1/va1j5jf8007s.c rename to drivers/media/pci/pt1/va1j5jf8007s.c index d980dfb21e5e1a2e78887ff51a9e2123c313a3dd..1b637b74ef589161fd1c195428bf90198c08b1df 100644 --- a/drivers/media/dvb/pt1/va1j5jf8007s.c +++ b/drivers/media/pci/pt1/va1j5jf8007s.c @@ -329,8 +329,8 @@ va1j5jf8007s_set_ts_id(struct va1j5jf8007s_state *state) u8 buf[3]; struct i2c_msg msg; - ts_id = state->fe.dtv_property_cache.isdbs_ts_id; - if (!ts_id) + ts_id = state->fe.dtv_property_cache.stream_id; + if (!ts_id || ts_id == NO_STREAM_ID_FILTER) return 0; buf[0] = 0x8f; @@ -356,8 +356,8 @@ va1j5jf8007s_check_ts_id(struct va1j5jf8007s_state *state, int *lock) struct i2c_msg msgs[2]; u32 ts_id; - ts_id = state->fe.dtv_property_cache.isdbs_ts_id; - if (!ts_id) { + ts_id = state->fe.dtv_property_cache.stream_id; + if (!ts_id || ts_id == NO_STREAM_ID_FILTER) { *lock = 1; return 0; } @@ -587,7 +587,8 @@ static struct dvb_frontend_ops va1j5jf8007s_ops = { .frequency_stepsize = 1000, .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO | FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | - FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO, + FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO | + FE_CAN_MULTISTREAM, }, .read_snr = va1j5jf8007s_read_snr, diff --git a/drivers/media/dvb/pt1/va1j5jf8007s.h b/drivers/media/pci/pt1/va1j5jf8007s.h similarity index 100% rename from drivers/media/dvb/pt1/va1j5jf8007s.h rename to drivers/media/pci/pt1/va1j5jf8007s.h diff --git a/drivers/media/dvb/pt1/va1j5jf8007t.c b/drivers/media/pci/pt1/va1j5jf8007t.c similarity index 100% rename from drivers/media/dvb/pt1/va1j5jf8007t.c rename to drivers/media/pci/pt1/va1j5jf8007t.c diff --git a/drivers/media/dvb/pt1/va1j5jf8007t.h b/drivers/media/pci/pt1/va1j5jf8007t.h similarity index 100% rename from drivers/media/dvb/pt1/va1j5jf8007t.h rename to drivers/media/pci/pt1/va1j5jf8007t.h diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/pci/saa7134/Kconfig similarity index 56% rename from drivers/media/video/saa7134/Kconfig rename to drivers/media/pci/saa7134/Kconfig index 39fc0187a747c22bb9b2dbee2ff298bfc8974787..15b90d6e9130a79608933308c1773584a30fdb80 100644 --- a/drivers/media/video/saa7134/Kconfig +++ b/drivers/media/pci/saa7134/Kconfig @@ -5,7 +5,7 @@ config VIDEO_SAA7134 select VIDEO_TUNER select VIDEO_TVEEPROM select CRC32 - select VIDEO_SAA6588 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA6588 if MEDIA_SUBDRV_AUTOSELECT ---help--- This is a video4linux driver for Philips SAA713x based TV cards. @@ -37,25 +37,25 @@ config VIDEO_SAA7134_DVB tristate "DVB/ATSC Support for saa7134 based TV cards" depends on VIDEO_SAA7134 && DVB_CORE select VIDEOBUF_DVB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_TDA1004X if !DVB_FE_CUSTOMISE - select DVB_NXT200X if !DVB_FE_CUSTOMISE - select DVB_TDA10086 if !DVB_FE_CUSTOMISE - select DVB_TDA826X if !DVB_FE_CUSTOMISE - select DVB_ISL6421 if !DVB_FE_CUSTOMISE - select DVB_ISL6405 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE - select DVB_ZL10036 if !DVB_FE_CUSTOMISE - select DVB_MT312 if !DVB_FE_CUSTOMISE - select DVB_LNBP21 if !DVB_FE_CUSTOMISE - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_LGDT3305 if !DVB_FE_CUSTOMISE - select DVB_TDA10048 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE - select DVB_ZL10039 if !DVB_FE_CUSTOMISE + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select DVB_NXT200X if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT + select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ISL6405 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10036 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT312 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10039 if MEDIA_SUBDRV_AUTOSELECT ---help--- This adds support for DVB cards based on the Philips saa7134 chip. diff --git a/drivers/media/video/saa7134/Makefile b/drivers/media/pci/saa7134/Makefile similarity index 54% rename from drivers/media/video/saa7134/Makefile rename to drivers/media/pci/saa7134/Makefile index da3899329f52bd9cad6e83d24643f84e4b4a24e0..35375480ed4d30cb2a57e2c82e1f16c3a23999e6 100644 --- a/drivers/media/video/saa7134/Makefile +++ b/drivers/media/pci/saa7134/Makefile @@ -1,5 +1,5 @@ -saa7134-y := saa7134-cards.o saa7134-core.o saa7134-i2c.o +saa7134-y += saa7134-cards.o saa7134-core.o saa7134-i2c.o saa7134-y += saa7134-ts.o saa7134-tvaudio.o saa7134-vbi.o saa7134-y += saa7134-video.o saa7134-$(CONFIG_VIDEO_SAA7134_RC) += saa7134-input.o @@ -10,7 +10,7 @@ obj-$(CONFIG_VIDEO_SAA7134_ALSA) += saa7134-alsa.o obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o -ccflags-y += -I$(srctree)/drivers/media/video -ccflags-y += -I$(srctree)/drivers/media/common/tuners -ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core -ccflags-y += -I$(srctree)/drivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/i2c +ccflags-y += -I$(srctree)/drivers/media/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb-frontends diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/pci/saa7134/saa6752hs.c similarity index 100% rename from drivers/media/video/saa7134/saa6752hs.c rename to drivers/media/pci/saa7134/saa6752hs.c diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/pci/saa7134/saa7134-alsa.c similarity index 100% rename from drivers/media/video/saa7134/saa7134-alsa.c rename to drivers/media/pci/saa7134/saa7134-alsa.c diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/pci/saa7134/saa7134-cards.c similarity index 100% rename from drivers/media/video/saa7134/saa7134-cards.c rename to drivers/media/pci/saa7134/saa7134-cards.c diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/pci/saa7134/saa7134-core.c similarity index 100% rename from drivers/media/video/saa7134/saa7134-core.c rename to drivers/media/pci/saa7134/saa7134-core.c diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/pci/saa7134/saa7134-dvb.c similarity index 99% rename from drivers/media/video/saa7134/saa7134-dvb.c rename to drivers/media/pci/saa7134/saa7134-dvb.c index cc7f3d6ee966f955cbaac74dfa3670d453e7c963..b209de40a4f8d69373eb8600f140c613a48310b2 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/pci/saa7134/saa7134-dvb.c @@ -1796,10 +1796,10 @@ static int dvb_init(struct saa7134_dev *dev) dvb_attach(tda829x_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x4b, &tda829x_no_probe); + fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl; dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, &kworld_tda18271_config); - fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl; } /* mb86a20s need to use the I2C gateway */ @@ -1849,7 +1849,7 @@ static int dvb_init(struct saa7134_dev *dev) /* register everything else */ ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, - &dev->pci->dev, adapter_nr, 0, NULL); + &dev->pci->dev, adapter_nr, 0); /* this sequence is necessary to make the tda1004x load its firmware * and to enter analog mode of hybrid boards diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/pci/saa7134/saa7134-empress.c similarity index 100% rename from drivers/media/video/saa7134/saa7134-empress.c rename to drivers/media/pci/saa7134/saa7134-empress.c diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/pci/saa7134/saa7134-i2c.c similarity index 100% rename from drivers/media/video/saa7134/saa7134-i2c.c rename to drivers/media/pci/saa7134/saa7134-i2c.c diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/pci/saa7134/saa7134-input.c similarity index 99% rename from drivers/media/video/saa7134/saa7134-input.c rename to drivers/media/pci/saa7134/saa7134-input.c index 05c6e217d8a7fc8d39c691cc5c4fc171e1022491..0f78f5e537e22723a26d1a8036e69ed3e5cdd5e3 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/pci/saa7134/saa7134-input.c @@ -446,11 +446,8 @@ static void saa7134_input_timer(unsigned long data) static void ir_raw_decode_timer_end(unsigned long data) { struct saa7134_dev *dev = (struct saa7134_dev *)data; - struct saa7134_card_ir *ir = dev->remote; ir_raw_event_handle(dev->remote->dev); - - ir->active = false; } static int __saa7134_ir_start(void *priv) @@ -501,7 +498,6 @@ static int __saa7134_ir_start(void *priv) } ir->running = true; - ir->active = false; if (ir->polling) { setup_timer(&ir->timer, saa7134_input_timer, @@ -532,7 +528,6 @@ static void __saa7134_ir_stop(void *priv) if (ir->polling || ir->raw_decode) del_timer_sync(&ir->timer); - ir->active = false; ir->running = false; return; @@ -1035,10 +1030,11 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev) * the event. This time is enough for NEC protocol. May need adjustments * to work with other protocols. */ - if (!ir->active) { + smp_mb(); + + if (!timer_pending(&ir->timer)) { timeout = jiffies + msecs_to_jiffies(15); mod_timer(&ir->timer, timeout); - ir->active = true; } return 1; diff --git a/drivers/media/video/saa7134/saa7134-reg.h b/drivers/media/pci/saa7134/saa7134-reg.h similarity index 100% rename from drivers/media/video/saa7134/saa7134-reg.h rename to drivers/media/pci/saa7134/saa7134-reg.h diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/pci/saa7134/saa7134-ts.c similarity index 100% rename from drivers/media/video/saa7134/saa7134-ts.c rename to drivers/media/pci/saa7134/saa7134-ts.c diff --git a/drivers/media/video/saa7134/saa7134-tvaudio.c b/drivers/media/pci/saa7134/saa7134-tvaudio.c similarity index 100% rename from drivers/media/video/saa7134/saa7134-tvaudio.c rename to drivers/media/pci/saa7134/saa7134-tvaudio.c diff --git a/drivers/media/video/saa7134/saa7134-vbi.c b/drivers/media/pci/saa7134/saa7134-vbi.c similarity index 100% rename from drivers/media/video/saa7134/saa7134-vbi.c rename to drivers/media/pci/saa7134/saa7134-vbi.c diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/pci/saa7134/saa7134-video.c similarity index 98% rename from drivers/media/video/saa7134/saa7134-video.c rename to drivers/media/pci/saa7134/saa7134-video.c index 6de10b1e72519b86724e518d5b32d9fb53580a4c..22f8758d047f247084814db5e70a75a3b6edd6a6 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/pci/saa7134/saa7134-video.c @@ -1953,11 +1953,12 @@ static int saa7134_g_crop(struct file *file, void *f, struct v4l2_crop *crop) return 0; } -static int saa7134_s_crop(struct file *file, void *f, struct v4l2_crop *crop) +static int saa7134_s_crop(struct file *file, void *f, const struct v4l2_crop *crop) { struct saa7134_fh *fh = f; struct saa7134_dev *dev = fh->dev; struct v4l2_rect *b = &dev->crop_bounds; + struct v4l2_rect *c = &dev->crop_current; if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) @@ -1972,21 +1973,20 @@ static int saa7134_s_crop(struct file *file, void *f, struct v4l2_crop *crop) if (res_locked(fh->dev, RESOURCE_VIDEO)) return -EBUSY; - if (crop->c.top < b->top) - crop->c.top = b->top; - if (crop->c.top > b->top + b->height) - crop->c.top = b->top + b->height; - if (crop->c.height > b->top - crop->c.top + b->height) - crop->c.height = b->top - crop->c.top + b->height; - - if (crop->c.left < b->left) - crop->c.left = b->left; - if (crop->c.left > b->left + b->width) - crop->c.left = b->left + b->width; - if (crop->c.width > b->left - crop->c.left + b->width) - crop->c.width = b->left - crop->c.left + b->width; - - dev->crop_current = crop->c; + *c = crop->c; + if (c->top < b->top) + c->top = b->top; + if (c->top > b->top + b->height) + c->top = b->top + b->height; + if (c->height > b->top - c->top + b->height) + c->height = b->top - c->top + b->height; + + if (c->left < b->left) + c->left = b->left; + if (c->left > b->left + b->width) + c->left = b->left + b->width; + if (c->width > b->left - c->left + b->width) + c->width = b->left - c->left + b->width; return 0; } @@ -2089,7 +2089,7 @@ static int saa7134_g_audio(struct file *file, void *priv, struct v4l2_audio *a) return 0; } -static int saa7134_s_audio(struct file *file, void *priv, struct v4l2_audio *a) +static int saa7134_s_audio(struct file *file, void *priv, const struct v4l2_audio *a) { return 0; } @@ -2158,7 +2158,7 @@ static int saa7134_g_fbuf(struct file *file, void *f, } static int saa7134_s_fbuf(struct file *file, void *f, - struct v4l2_framebuffer *fb) + const struct v4l2_framebuffer *fb) { struct saa7134_fh *fh = f; struct saa7134_dev *dev = fh->dev; @@ -2373,7 +2373,7 @@ static int radio_g_audio(struct file *file, void *priv, } static int radio_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) + const struct v4l2_audio *a) { return 0; } diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/pci/saa7134/saa7134.h similarity index 99% rename from drivers/media/video/saa7134/saa7134.h rename to drivers/media/pci/saa7134/saa7134.h index 89c8333736a28706a0c0e6ce42ef597921643f45..c24b6512bd8f8976f514c8a609f2238eaa2b9f45 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/pci/saa7134/saa7134.h @@ -130,7 +130,6 @@ struct saa7134_card_ir { u32 mask_keycode, mask_keydown, mask_keyup; bool running; - bool active; struct timer_list timer; diff --git a/drivers/media/pci/saa7146/Kconfig b/drivers/media/pci/saa7146/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..da88b77a916caa7a66b88b7451c4f324b18a1218 --- /dev/null +++ b/drivers/media/pci/saa7146/Kconfig @@ -0,0 +1,38 @@ +config VIDEO_HEXIUM_GEMINI + tristate "Hexium Gemini frame grabber" + depends on PCI && VIDEO_V4L2 && I2C + select VIDEO_SAA7146_VV + ---help--- + This is a video4linux driver for the Hexium Gemini frame + grabber card by Hexium. Please note that the Gemini Dual + card is *not* fully supported. + + To compile this driver as a module, choose M here: the + module will be called hexium_gemini. + +config VIDEO_HEXIUM_ORION + tristate "Hexium HV-PCI6 and Orion frame grabber" + depends on PCI && VIDEO_V4L2 && I2C + select VIDEO_SAA7146_VV + ---help--- + This is a video4linux driver for the Hexium HV-PCI6 and + Orion frame grabber cards by Hexium. + + To compile this driver as a module, choose M here: the + module will be called hexium_orion. + +config VIDEO_MXB + tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" + depends on PCI && VIDEO_V4L2 && I2C + select VIDEO_SAA7146_VV + select VIDEO_TUNER + select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_TDA9840 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_TEA6415C if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_TEA6420 if MEDIA_SUBDRV_AUTOSELECT + ---help--- + This is a video4linux driver for the 'Multimedia eXtension Board' + TV card by Siemens-Nixdorf. + + To compile this driver as a module, choose M here: the + module will be called mxb. diff --git a/drivers/media/pci/saa7146/Makefile b/drivers/media/pci/saa7146/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..f3566a95e4aa1dd8cbbbedc048ac79d65444a389 --- /dev/null +++ b/drivers/media/pci/saa7146/Makefile @@ -0,0 +1,5 @@ +obj-$(CONFIG_VIDEO_MXB) += mxb.o +obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o +obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o + +ccflags-y += -I$(srctree)/drivers/media/i2c diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/pci/saa7146/hexium_gemini.c similarity index 100% rename from drivers/media/video/hexium_gemini.c rename to drivers/media/pci/saa7146/hexium_gemini.c diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/pci/saa7146/hexium_orion.c similarity index 100% rename from drivers/media/video/hexium_orion.c rename to drivers/media/pci/saa7146/hexium_orion.c diff --git a/drivers/media/video/mxb.c b/drivers/media/pci/saa7146/mxb.c similarity index 99% rename from drivers/media/video/mxb.c rename to drivers/media/pci/saa7146/mxb.c index b520a45cb3f328e0ec7785759a662ece47cfbc7a..91369daad72285005c14701c9dd0052d2e6adece 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/pci/saa7146/mxb.c @@ -646,7 +646,7 @@ static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a) return 0; } -static int vidioc_s_audio(struct file *file, void *fh, struct v4l2_audio *a) +static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *a) { struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; struct mxb *mxb = (struct mxb *)dev->ext_priv; diff --git a/drivers/media/video/saa7164/Kconfig b/drivers/media/pci/saa7164/Kconfig similarity index 62% rename from drivers/media/video/saa7164/Kconfig rename to drivers/media/pci/saa7164/Kconfig index 3532637251721a6b5cd05bd2bf7f1979f52911a8..a53db7d1c96e8b5a83dcc1d0997f6ebf18c8cb8c 100644 --- a/drivers/media/video/saa7164/Kconfig +++ b/drivers/media/pci/saa7164/Kconfig @@ -1,14 +1,14 @@ config VIDEO_SAA7164 tristate "NXP SAA7164 support" - depends on DVB_CORE && PCI && I2C + depends on DVB_CORE && VIDEO_DEV && PCI && I2C select I2C_ALGOBIT select FW_LOADER select VIDEO_TUNER select VIDEO_TVEEPROM select VIDEOBUF_DVB - select DVB_TDA10048 if !DVB_FE_CUSTOMISE - select DVB_S5H1411 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE + select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT ---help--- This is a video4linux driver for NXP SAA7164 based TV cards. diff --git a/drivers/media/video/saa7164/Makefile b/drivers/media/pci/saa7164/Makefile similarity index 57% rename from drivers/media/video/saa7164/Makefile rename to drivers/media/pci/saa7164/Makefile index 068443af30c8066e29c184d84788c9301ec592b2..ba0e33a1ee2488869544a06f15e57e2ef83a52a5 100644 --- a/drivers/media/video/saa7164/Makefile +++ b/drivers/media/pci/saa7164/Makefile @@ -4,9 +4,9 @@ saa7164-objs := saa7164-cards.o saa7164-core.o saa7164-i2c.o saa7164-dvb.o \ obj-$(CONFIG_VIDEO_SAA7164) += saa7164.o -ccflags-y += -I$(srctree)/drivers/media/video -ccflags-y += -I$(srctree)/drivers/media/common/tuners -ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core -ccflags-y += -I$(srctree)/drivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/i2c +ccflags-y += -I$(srctree)/drivers/media/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb-frontends ccflags-y += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/video/saa7164/saa7164-api.c b/drivers/media/pci/saa7164/saa7164-api.c similarity index 98% rename from drivers/media/video/saa7164/saa7164-api.c rename to drivers/media/pci/saa7164/saa7164-api.c index c8799fdaae67d074e0bdbe64ea2bac4f752edb2f..eff7135cf0e8999beb790f0c406f0d7fdd1d772e 100644 --- a/drivers/media/video/saa7164/saa7164-api.c +++ b/drivers/media/pci/saa7164/saa7164-api.c @@ -670,7 +670,8 @@ int saa7164_api_set_dif(struct saa7164_port *port, u8 reg, u8 val) if (ret != SAA_OK) printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); #if 0 - saa7164_dumphex16(dev, buf, 16); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, buf, 16, + false); #endif return ret == SAA_OK ? 0 : -EIO; } @@ -1352,7 +1353,8 @@ int saa7164_api_enum_subdevs(struct saa7164_dev *dev) } if (saa_debug & DBGLVL_API) - saa7164_dumphex16(dev, buf, (buflen/16)*16); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, buf, + buflen & ~15, false); saa7164_api_dump_subdevs(dev, buf, buflen); @@ -1403,7 +1405,8 @@ int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg, dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); if (saa_debug & DBGLVL_I2C) - saa7164_dumphex16(dev, buf, 2 * 16); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, buf, + 32, false); ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR, EXU_REGISTER_ACCESS_CONTROL, len, &buf); @@ -1411,7 +1414,8 @@ int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg, printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); else { if (saa_debug & DBGLVL_I2C) - saa7164_dumphex16(dev, buf, sizeof(buf)); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, + buf, sizeof(buf), false); memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen); } @@ -1471,7 +1475,8 @@ int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen, memcpy((buf + 2 * sizeof(u32)), data, datalen); if (saa_debug & DBGLVL_I2C) - saa7164_dumphex16(dev, buf, sizeof(buf)); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, + buf, sizeof(buf), false); ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR, EXU_REGISTER_ACCESS_CONTROL, len, &buf); diff --git a/drivers/media/video/saa7164/saa7164-buffer.c b/drivers/media/pci/saa7164/saa7164-buffer.c similarity index 100% rename from drivers/media/video/saa7164/saa7164-buffer.c rename to drivers/media/pci/saa7164/saa7164-buffer.c diff --git a/drivers/media/video/saa7164/saa7164-bus.c b/drivers/media/pci/saa7164/saa7164-bus.c similarity index 100% rename from drivers/media/video/saa7164/saa7164-bus.c rename to drivers/media/pci/saa7164/saa7164-bus.c diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/pci/saa7164/saa7164-cards.c similarity index 100% rename from drivers/media/video/saa7164/saa7164-cards.c rename to drivers/media/pci/saa7164/saa7164-cards.c diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/pci/saa7164/saa7164-cmd.c similarity index 100% rename from drivers/media/video/saa7164/saa7164-cmd.c rename to drivers/media/pci/saa7164/saa7164-cmd.c diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c similarity index 96% rename from drivers/media/video/saa7164/saa7164-core.c rename to drivers/media/pci/saa7164/saa7164-core.c index 3b7d7b4e303448187f6b74ee51b802d82c89ac0c..2c9ad878bef3dedab9c91a19019d7443d151affb 100644 --- a/drivers/media/video/saa7164/saa7164-core.c +++ b/drivers/media/pci/saa7164/saa7164-core.c @@ -92,28 +92,6 @@ LIST_HEAD(saa7164_devlist); #define INT_SIZE 16 -void saa7164_dumphex16FF(struct saa7164_dev *dev, u8 *buf, int len) -{ - int i; - u8 tmp[16]; - memset(&tmp[0], 0xff, sizeof(tmp)); - - printk(KERN_INFO "--------------------> " - "00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); - - for (i = 0; i < len; i += 16) { - if (memcmp(&tmp, buf + i, sizeof(tmp)) != 0) { - printk(KERN_INFO " [0x%08x] " - "%02x %02x %02x %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, - *(buf+i+0), *(buf+i+1), *(buf+i+2), *(buf+i+3), - *(buf+i+4), *(buf+i+5), *(buf+i+6), *(buf+i+7), - *(buf+i+8), *(buf+i+9), *(buf+i+10), *(buf+i+11), - *(buf+i+12), *(buf+i+13), *(buf+i+14), *(buf+i+15)); - } - } -} - static void saa7164_pack_verifier(struct saa7164_buffer *buf) { u8 *p = (u8 *)buf->cpu; @@ -125,7 +103,8 @@ static void saa7164_pack_verifier(struct saa7164_buffer *buf) (*(p + i + 2) != 0x01) || (*(p + i + 3) != 0xBA)) { printk(KERN_ERR "No pack at 0x%x\n", i); #if 0 - saa7164_dumphex16FF(buf->port->dev, (p + i), 32); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, + p + 1, 32, false); #endif } } @@ -316,7 +295,8 @@ static void saa7164_work_enchandler_helper(struct saa7164_port *port, int bufnr) printk(KERN_ERR "%s() buf %p guard buffer breach\n", __func__, buf); #if 0 - saa7164_dumphex16FF(dev, (p + buf->actual_size) - 32 , 64); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, + p + buf->actual_size - 32, 64, false); #endif } } @@ -776,24 +756,6 @@ u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev) return reg; } -/* TODO: Debugging func, remove */ -void saa7164_dumphex16(struct saa7164_dev *dev, u8 *buf, int len) -{ - int i; - - printk(KERN_INFO "--------------------> " - "00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); - - for (i = 0; i < len; i += 16) - printk(KERN_INFO " [0x%08x] " - "%02x %02x %02x %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, - *(buf+i+0), *(buf+i+1), *(buf+i+2), *(buf+i+3), - *(buf+i+4), *(buf+i+5), *(buf+i+6), *(buf+i+7), - *(buf+i+8), *(buf+i+9), *(buf+i+10), *(buf+i+11), - *(buf+i+12), *(buf+i+13), *(buf+i+14), *(buf+i+15)); -} - /* TODO: Debugging func, remove */ void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr) { diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/pci/saa7164/saa7164-dvb.c similarity index 100% rename from drivers/media/video/saa7164/saa7164-dvb.c rename to drivers/media/pci/saa7164/saa7164-dvb.c diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/pci/saa7164/saa7164-encoder.c similarity index 100% rename from drivers/media/video/saa7164/saa7164-encoder.c rename to drivers/media/pci/saa7164/saa7164-encoder.c diff --git a/drivers/media/video/saa7164/saa7164-fw.c b/drivers/media/pci/saa7164/saa7164-fw.c similarity index 100% rename from drivers/media/video/saa7164/saa7164-fw.c rename to drivers/media/pci/saa7164/saa7164-fw.c diff --git a/drivers/media/video/saa7164/saa7164-i2c.c b/drivers/media/pci/saa7164/saa7164-i2c.c similarity index 100% rename from drivers/media/video/saa7164/saa7164-i2c.c rename to drivers/media/pci/saa7164/saa7164-i2c.c diff --git a/drivers/media/video/saa7164/saa7164-reg.h b/drivers/media/pci/saa7164/saa7164-reg.h similarity index 100% rename from drivers/media/video/saa7164/saa7164-reg.h rename to drivers/media/pci/saa7164/saa7164-reg.h diff --git a/drivers/media/video/saa7164/saa7164-types.h b/drivers/media/pci/saa7164/saa7164-types.h similarity index 100% rename from drivers/media/video/saa7164/saa7164-types.h rename to drivers/media/pci/saa7164/saa7164-types.h diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/pci/saa7164/saa7164-vbi.c similarity index 100% rename from drivers/media/video/saa7164/saa7164-vbi.c rename to drivers/media/pci/saa7164/saa7164-vbi.c diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/pci/saa7164/saa7164.h similarity index 99% rename from drivers/media/video/saa7164/saa7164.h rename to drivers/media/pci/saa7164/saa7164.h index 35219b9b0fbcc05844dac644aa82a268a5213fde..437284e747c973d5a3025eb1c39e989313891a08 100644 --- a/drivers/media/video/saa7164/saa7164.h +++ b/drivers/media/pci/saa7164/saa7164.h @@ -484,7 +484,6 @@ extern unsigned int vbi_buffers; /* ----------------------------------------------------------- */ /* saa7164-core.c */ void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr); -void saa7164_dumphex16(struct saa7164_dev *dev, u8 *buf, int len); void saa7164_getfirmwarestatus(struct saa7164_dev *dev); u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev); void saa7164_histogram_update(struct saa7164_histogram *hg, u32 val); diff --git a/drivers/media/pci/sta2x11/Kconfig b/drivers/media/pci/sta2x11/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..6749f67cab8a05a167b0965b03608e7966ab2859 --- /dev/null +++ b/drivers/media/pci/sta2x11/Kconfig @@ -0,0 +1,12 @@ +config STA2X11_VIP + tristate "STA2X11 VIP Video For Linux" + depends on STA2X11 + select VIDEO_ADV7180 if MEDIA_SUBDRV_AUTOSELECT + select VIDEOBUF_DMA_CONTIG + depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS + help + Say Y for support for STA2X11 VIP (Video Input Port) capture + device. + + To compile this driver as a module, choose M here: the + module will be called sta2x11_vip. diff --git a/drivers/media/pci/sta2x11/Makefile b/drivers/media/pci/sta2x11/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..d6c471d1d1b4ff246999e3e79484f18e0b920f25 --- /dev/null +++ b/drivers/media/pci/sta2x11/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_STA2X11_VIP) += sta2x11_vip.o diff --git a/drivers/media/video/sta2x11_vip.c b/drivers/media/pci/sta2x11/sta2x11_vip.c similarity index 100% rename from drivers/media/video/sta2x11_vip.c rename to drivers/media/pci/sta2x11/sta2x11_vip.c diff --git a/drivers/media/video/sta2x11_vip.h b/drivers/media/pci/sta2x11/sta2x11_vip.h similarity index 100% rename from drivers/media/video/sta2x11_vip.h rename to drivers/media/pci/sta2x11/sta2x11_vip.h diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig similarity index 66% rename from drivers/media/dvb/ttpci/Kconfig rename to drivers/media/pci/ttpci/Kconfig index 9d83ced69dd6b9b2ace991cf2eca21565721b70d..314e417addaed8cc1cc25fd5e59b75a7fa7aaf06 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/pci/ttpci/Kconfig @@ -9,14 +9,14 @@ config DVB_AV7110 select TTPCI_EEPROM select VIDEO_SAA7146_VV depends on VIDEO_DEV # dependencies of VIDEO_SAA7146_VV - select DVB_VES1820 if !DVB_FE_CUSTOMISE - select DVB_VES1X93 if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_TDA8083 if !DVB_FE_CUSTOMISE - select DVB_SP8870 if !DVB_FE_CUSTOMISE - select DVB_STV0297 if !DVB_FE_CUSTOMISE - select DVB_L64781 if !DVB_FE_CUSTOMISE - select DVB_LNBP21 if !DVB_FE_CUSTOMISE + select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT + select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT + select DVB_SP8870 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT + select DVB_L64781 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT help Support for SAA7146 and AV7110 based DVB cards as produced by Fujitsu-Siemens, Technotrend, Hauppauge and others. @@ -63,19 +63,19 @@ config DVB_BUDGET_CORE config DVB_BUDGET tristate "Budget cards" depends on DVB_BUDGET_CORE && I2C - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_VES1X93 if !DVB_FE_CUSTOMISE - select DVB_VES1820 if !DVB_FE_CUSTOMISE - select DVB_L64781 if !DVB_FE_CUSTOMISE - select DVB_TDA8083 if !DVB_FE_CUSTOMISE - select DVB_S5H1420 if !DVB_FE_CUSTOMISE - select DVB_TDA10086 if !DVB_FE_CUSTOMISE - select DVB_TDA826X if !DVB_FE_CUSTOMISE - select DVB_LNBP21 if !DVB_FE_CUSTOMISE - select DVB_TDA1004X if !DVB_FE_CUSTOMISE - select DVB_ISL6423 if !DVB_FE_CUSTOMISE - select DVB_STV090x if !DVB_FE_CUSTOMISE - select DVB_STV6110x if !DVB_FE_CUSTOMISE + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT + select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT + select DVB_L64781 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1420 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT help Support for simple SAA7146 based DVB cards (so called Budget- or Nova-PCI cards) without onboard MPEG2 decoder, and without @@ -89,16 +89,16 @@ config DVB_BUDGET config DVB_BUDGET_CI tristate "Budget cards with onboard CI connector" depends on DVB_BUDGET_CORE && I2C - select DVB_STV0297 if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_TDA1004X if !DVB_FE_CUSTOMISE - select DVB_STB0899 if !DVB_FE_CUSTOMISE - select DVB_STB6100 if !DVB_FE_CUSTOMISE - select DVB_LNBP21 if !DVB_FE_CUSTOMISE - select DVB_STV0288 if !DVB_FE_CUSTOMISE - select DVB_STB6000 if !DVB_FE_CUSTOMISE - select DVB_TDA10023 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE + select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT depends on RC_CORE help Support for simple SAA7146 based DVB cards @@ -118,14 +118,14 @@ config DVB_BUDGET_AV depends on DVB_BUDGET_CORE && I2C select VIDEO_SAA7146_VV depends on VIDEO_DEV # dependencies of VIDEO_SAA7146_VV - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_TDA1004X if !DVB_FE_CUSTOMISE - select DVB_TDA10021 if !DVB_FE_CUSTOMISE - select DVB_TDA10023 if !DVB_FE_CUSTOMISE - select DVB_STB0899 if !DVB_FE_CUSTOMISE - select DVB_TDA8261 if !DVB_FE_CUSTOMISE - select DVB_TUA6100 if !DVB_FE_CUSTOMISE + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10021 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA8261 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUA6100 if MEDIA_SUBDRV_AUTOSELECT help Support for simple SAA7146 based DVB cards (so called Budget- or Nova-PCI cards) without onboard @@ -140,9 +140,9 @@ config DVB_BUDGET_PATCH tristate "AV7110 cards with Budget Patch" depends on DVB_BUDGET_CORE && I2C depends on DVB_AV7110 - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_VES1X93 if !DVB_FE_CUSTOMISE - select DVB_TDA8083 if !DVB_FE_CUSTOMISE + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT help Support for Budget Patch (full TS) modification on SAA7146+AV7110 based cards (DVB-S cards). This diff --git a/drivers/media/dvb/ttpci/Makefile b/drivers/media/pci/ttpci/Makefile similarity index 82% rename from drivers/media/dvb/ttpci/Makefile rename to drivers/media/pci/ttpci/Makefile index f6e869372e303f3f7dfac8b497e2c0e76a40be6c..98905963ff085c0b0e265b7bf26ae0d892aa6a83 100644 --- a/drivers/media/dvb/ttpci/Makefile +++ b/drivers/media/pci/ttpci/Makefile @@ -17,5 +17,5 @@ obj-$(CONFIG_DVB_BUDGET_CI) += budget-ci.o obj-$(CONFIG_DVB_BUDGET_PATCH) += budget-patch.o obj-$(CONFIG_DVB_AV7110) += dvb-ttpci.o -ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ -ccflags-y += -Idrivers/media/common/tuners +ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends/ +ccflags-y += -Idrivers/media/tuners diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/pci/ttpci/av7110.c similarity index 100% rename from drivers/media/dvb/ttpci/av7110.c rename to drivers/media/pci/ttpci/av7110.c diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/pci/ttpci/av7110.h similarity index 100% rename from drivers/media/dvb/ttpci/av7110.h rename to drivers/media/pci/ttpci/av7110.h diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/pci/ttpci/av7110_av.c similarity index 100% rename from drivers/media/dvb/ttpci/av7110_av.c rename to drivers/media/pci/ttpci/av7110_av.c diff --git a/drivers/media/dvb/ttpci/av7110_av.h b/drivers/media/pci/ttpci/av7110_av.h similarity index 100% rename from drivers/media/dvb/ttpci/av7110_av.h rename to drivers/media/pci/ttpci/av7110_av.h diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/pci/ttpci/av7110_ca.c similarity index 100% rename from drivers/media/dvb/ttpci/av7110_ca.c rename to drivers/media/pci/ttpci/av7110_ca.c diff --git a/drivers/media/dvb/ttpci/av7110_ca.h b/drivers/media/pci/ttpci/av7110_ca.h similarity index 100% rename from drivers/media/dvb/ttpci/av7110_ca.h rename to drivers/media/pci/ttpci/av7110_ca.h diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/pci/ttpci/av7110_hw.c similarity index 100% rename from drivers/media/dvb/ttpci/av7110_hw.c rename to drivers/media/pci/ttpci/av7110_hw.c diff --git a/drivers/media/dvb/ttpci/av7110_hw.h b/drivers/media/pci/ttpci/av7110_hw.h similarity index 100% rename from drivers/media/dvb/ttpci/av7110_hw.h rename to drivers/media/pci/ttpci/av7110_hw.h diff --git a/drivers/media/dvb/ttpci/av7110_ipack.c b/drivers/media/pci/ttpci/av7110_ipack.c similarity index 100% rename from drivers/media/dvb/ttpci/av7110_ipack.c rename to drivers/media/pci/ttpci/av7110_ipack.c diff --git a/drivers/media/dvb/ttpci/av7110_ipack.h b/drivers/media/pci/ttpci/av7110_ipack.h similarity index 100% rename from drivers/media/dvb/ttpci/av7110_ipack.h rename to drivers/media/pci/ttpci/av7110_ipack.h diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/pci/ttpci/av7110_ir.c similarity index 100% rename from drivers/media/dvb/ttpci/av7110_ir.c rename to drivers/media/pci/ttpci/av7110_ir.c diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/pci/ttpci/av7110_v4l.c similarity index 99% rename from drivers/media/dvb/ttpci/av7110_v4l.c rename to drivers/media/pci/ttpci/av7110_v4l.c index 1b2d15140a1d938f63269b1d94c224e36197b976..730e906ea912d12d810be017aa885372c476af86 100644 --- a/drivers/media/dvb/ttpci/av7110_v4l.c +++ b/drivers/media/pci/ttpci/av7110_v4l.c @@ -526,7 +526,7 @@ static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a) return 0; } -static int vidioc_s_audio(struct file *file, void *fh, struct v4l2_audio *a) +static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *a) { struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; struct av7110 *av7110 = (struct av7110 *)dev->ext_priv; diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/pci/ttpci/budget-av.c similarity index 100% rename from drivers/media/dvb/ttpci/budget-av.c rename to drivers/media/pci/ttpci/budget-av.c diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/pci/ttpci/budget-ci.c similarity index 100% rename from drivers/media/dvb/ttpci/budget-ci.c rename to drivers/media/pci/ttpci/budget-ci.c diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/pci/ttpci/budget-core.c similarity index 100% rename from drivers/media/dvb/ttpci/budget-core.c rename to drivers/media/pci/ttpci/budget-core.c diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/pci/ttpci/budget-patch.c similarity index 100% rename from drivers/media/dvb/ttpci/budget-patch.c rename to drivers/media/pci/ttpci/budget-patch.c diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/pci/ttpci/budget.c similarity index 91% rename from drivers/media/dvb/ttpci/budget.c rename to drivers/media/pci/ttpci/budget.c index b21bcce667088a2d0f09cf66cab7d9985a72427b..7e6e43ae5c5151a3b5a8411e884594552c0f64c4 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/pci/ttpci/budget.c @@ -50,6 +50,8 @@ #include "stv6110x.h" #include "stv090x.h" #include "isl6423.h" +#include "lnbh24.h" + static int diseqc_method; module_param(diseqc_method, int, 0444); @@ -679,6 +681,62 @@ static void frontend_init(struct budget *budget) } } break; + + case 0x1020: { /* Omicom S2 */ + struct stv6110x_devctl *ctl; + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); + msleep(50); + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); + msleep(250); + + budget->dvb_frontend = dvb_attach(stv090x_attach, + &tt1600_stv090x_config, + &budget->i2c_adap, + STV090x_DEMODULATOR_0); + + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: Omicom S2 detected\n"); + + ctl = dvb_attach(stv6110x_attach, + budget->dvb_frontend, + &tt1600_stv6110x_config, + &budget->i2c_adap); + + if (ctl) { + tt1600_stv090x_config.tuner_init = ctl->tuner_init; + tt1600_stv090x_config.tuner_sleep = ctl->tuner_sleep; + tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode; + tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency; + tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency; + tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth; + tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth; + tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain; + tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain; + tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk; + tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status; + + /* call the init function once to initialize + tuner's clock output divider and demod's + master clock */ + if (budget->dvb_frontend->ops.init) + budget->dvb_frontend->ops.init(budget->dvb_frontend); + + if (dvb_attach(lnbh24_attach, + budget->dvb_frontend, + &budget->i2c_adap, + LNBH24_PCL | LNBH24_TTX, + LNBH24_TEN, 0x14>>1) == NULL) { + printk(KERN_ERR + "No LNBH24 found!\n"); + goto error_out; + } + } else { + printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__); + goto error_out; + } + } + } + break; } if (budget->dvb_frontend == NULL) { @@ -759,6 +817,7 @@ MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig fr MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY); MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY); MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY); +MAKE_BUDGET_INFO(omicom, "Omicom S2 PCI", BUDGET_TT); static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003), @@ -772,6 +831,7 @@ static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60), MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61), + MAKE_EXTENSION_PCI(omicom, 0x14c4, 0x1020), { .vendor = 0, } diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/pci/ttpci/budget.h similarity index 100% rename from drivers/media/dvb/ttpci/budget.h rename to drivers/media/pci/ttpci/budget.h diff --git a/drivers/media/dvb/ttpci/ttpci-eeprom.c b/drivers/media/pci/ttpci/ttpci-eeprom.c similarity index 100% rename from drivers/media/dvb/ttpci/ttpci-eeprom.c rename to drivers/media/pci/ttpci/ttpci-eeprom.c diff --git a/drivers/media/dvb/ttpci/ttpci-eeprom.h b/drivers/media/pci/ttpci/ttpci-eeprom.h similarity index 100% rename from drivers/media/dvb/ttpci/ttpci-eeprom.h rename to drivers/media/pci/ttpci/ttpci-eeprom.h diff --git a/drivers/media/video/zoran/Kconfig b/drivers/media/pci/zoran/Kconfig similarity index 71% rename from drivers/media/video/zoran/Kconfig rename to drivers/media/pci/zoran/Kconfig index fd4120e4c104490d9cbb0f6bda4971b049e673a5..26ca8702e33f3449d1b03bd441fb1b139804b753 100644 --- a/drivers/media/video/zoran/Kconfig +++ b/drivers/media/pci/zoran/Kconfig @@ -14,8 +14,8 @@ config VIDEO_ZORAN config VIDEO_ZORAN_DC30 tristate "Pinnacle/Miro DC30(+) support" depends on VIDEO_ZORAN - select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_ADV7175 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_VPX3220 if MEDIA_SUBDRV_AUTOSELECT help Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback card. This also supports really old DC10 cards based on the @@ -32,16 +32,16 @@ config VIDEO_ZORAN_ZR36060 config VIDEO_ZORAN_BUZ tristate "Iomega Buz support" depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_SAA7185 if MEDIA_SUBDRV_AUTOSELECT help Support for the Iomega Buz MJPEG capture/playback card. config VIDEO_ZORAN_DC10 tristate "Pinnacle/Miro DC10(+) support" depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA7110 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA7110 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_ADV7175 if MEDIA_SUBDRV_AUTOSELECT help Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback card. @@ -49,8 +49,8 @@ config VIDEO_ZORAN_DC10 config VIDEO_ZORAN_LML33 tristate "Linux Media Labs LML33 support" depends on VIDEO_ZORAN_ZR36060 - select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_BT819 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_BT856 if MEDIA_SUBDRV_AUTOSELECT help Support for the Linux Media Labs LML33 MJPEG capture/playback card. @@ -58,17 +58,17 @@ config VIDEO_ZORAN_LML33 config VIDEO_ZORAN_LML33R10 tristate "Linux Media Labs LML33R10 support" depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_ADV7170 if MEDIA_SUBDRV_AUTOSELECT help support for the Linux Media Labs LML33R10 MJPEG capture/playback card. config VIDEO_ZORAN_AVS6EYES - tristate "AverMedia 6 Eyes support (EXPERIMENTAL)" - depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL - select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_BT866 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO + tristate "AverMedia 6 Eyes support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_BT856 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_BT866 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_KS0127 if MEDIA_SUBDRV_AUTOSELECT help Support for the AverMedia 6 Eyes video surveillance card. diff --git a/drivers/media/video/zoran/Makefile b/drivers/media/pci/zoran/Makefile similarity index 100% rename from drivers/media/video/zoran/Makefile rename to drivers/media/pci/zoran/Makefile diff --git a/drivers/media/video/zoran/videocodec.c b/drivers/media/pci/zoran/videocodec.c similarity index 100% rename from drivers/media/video/zoran/videocodec.c rename to drivers/media/pci/zoran/videocodec.c diff --git a/drivers/media/video/zoran/videocodec.h b/drivers/media/pci/zoran/videocodec.h similarity index 100% rename from drivers/media/video/zoran/videocodec.h rename to drivers/media/pci/zoran/videocodec.h diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/pci/zoran/zoran.h similarity index 100% rename from drivers/media/video/zoran/zoran.h rename to drivers/media/pci/zoran/zoran.h diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/pci/zoran/zoran_card.c similarity index 99% rename from drivers/media/video/zoran/zoran_card.c rename to drivers/media/pci/zoran/zoran_card.c index c3602d6cd48e839f9fa1cadbad9e8ab9e4e9bcc6..fffc54b452c8aa8f510928eaa40c7e99171f8d3f 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/pci/zoran/zoran_card.c @@ -1055,6 +1055,10 @@ zr36057_init (struct zoran *zr) memcpy(zr->video_dev, &zoran_template, sizeof(zoran_template)); zr->video_dev->parent = &zr->pci_dev->dev; strcpy(zr->video_dev->name, ZR_DEVNAME(zr)); + /* It's not a mem2mem device, but you can both capture and output from + one and the same device. This should really be split up into two + device nodes, but that's a job for another day. */ + zr->video_dev->vfl_dir = VFL_DIR_M2M; err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]); if (err < 0) goto exit_free; diff --git a/drivers/media/video/zoran/zoran_card.h b/drivers/media/pci/zoran/zoran_card.h similarity index 100% rename from drivers/media/video/zoran/zoran_card.h rename to drivers/media/pci/zoran/zoran_card.h diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/pci/zoran/zoran_device.c similarity index 100% rename from drivers/media/video/zoran/zoran_device.c rename to drivers/media/pci/zoran/zoran_device.c diff --git a/drivers/media/video/zoran/zoran_device.h b/drivers/media/pci/zoran/zoran_device.h similarity index 100% rename from drivers/media/video/zoran/zoran_device.h rename to drivers/media/pci/zoran/zoran_device.h diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/pci/zoran/zoran_driver.c similarity index 99% rename from drivers/media/video/zoran/zoran_driver.c rename to drivers/media/pci/zoran/zoran_driver.c index c6ccdeb6d8d6e50bb0db8c624c97e7b19ca9b7ac..53f12c7466b0b971218c2c1c6d769fa0d3f32461 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/pci/zoran/zoran_driver.c @@ -1978,7 +1978,7 @@ static int zoran_g_fbuf(struct file *file, void *__fh, } static int zoran_s_fbuf(struct file *file, void *__fh, - struct v4l2_framebuffer *fb) + const struct v4l2_framebuffer *fb) { struct zoran_fh *fh = __fh; struct zoran *zr = fh->zr; @@ -2598,7 +2598,7 @@ static int zoran_g_crop(struct file *file, void *__fh, struct v4l2_crop *crop) return res; } -static int zoran_s_crop(struct file *file, void *__fh, struct v4l2_crop *crop) +static int zoran_s_crop(struct file *file, void *__fh, const struct v4l2_crop *crop) { struct zoran_fh *fh = __fh; struct zoran *zr = fh->zr; @@ -2674,7 +2674,7 @@ static int zoran_g_jpegcomp(struct file *file, void *__fh, } static int zoran_s_jpegcomp(struct file *file, void *__fh, - struct v4l2_jpegcompression *params) + const struct v4l2_jpegcompression *params) { struct zoran_fh *fh = __fh; struct zoran *zr = fh->zr; @@ -2701,7 +2701,7 @@ static int zoran_s_jpegcomp(struct file *file, void *__fh, if (!fh->buffers.allocated) fh->buffers.buffer_size = zoran_v4l2_calc_bufsize(&fh->jpg_settings); - fh->jpg_settings.jpg_comp = *params = settings.jpg_comp; + fh->jpg_settings.jpg_comp = settings.jpg_comp; sjpegc_unlock_and_return: mutex_unlock(&zr->resource_lock); diff --git a/drivers/media/video/zoran/zoran_procfs.c b/drivers/media/pci/zoran/zoran_procfs.c similarity index 100% rename from drivers/media/video/zoran/zoran_procfs.c rename to drivers/media/pci/zoran/zoran_procfs.c diff --git a/drivers/media/video/zoran/zoran_procfs.h b/drivers/media/pci/zoran/zoran_procfs.h similarity index 100% rename from drivers/media/video/zoran/zoran_procfs.h rename to drivers/media/pci/zoran/zoran_procfs.h diff --git a/drivers/media/video/zoran/zr36016.c b/drivers/media/pci/zoran/zr36016.c similarity index 100% rename from drivers/media/video/zoran/zr36016.c rename to drivers/media/pci/zoran/zr36016.c diff --git a/drivers/media/video/zoran/zr36016.h b/drivers/media/pci/zoran/zr36016.h similarity index 100% rename from drivers/media/video/zoran/zr36016.h rename to drivers/media/pci/zoran/zr36016.h diff --git a/drivers/media/video/zoran/zr36050.c b/drivers/media/pci/zoran/zr36050.c similarity index 100% rename from drivers/media/video/zoran/zr36050.c rename to drivers/media/pci/zoran/zr36050.c diff --git a/drivers/media/video/zoran/zr36050.h b/drivers/media/pci/zoran/zr36050.h similarity index 100% rename from drivers/media/video/zoran/zr36050.h rename to drivers/media/pci/zoran/zr36050.h diff --git a/drivers/media/video/zoran/zr36057.h b/drivers/media/pci/zoran/zr36057.h similarity index 100% rename from drivers/media/video/zoran/zr36057.h rename to drivers/media/pci/zoran/zr36057.h diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/pci/zoran/zr36060.c similarity index 100% rename from drivers/media/video/zoran/zr36060.c rename to drivers/media/pci/zoran/zr36060.c diff --git a/drivers/media/video/zoran/zr36060.h b/drivers/media/pci/zoran/zr36060.h similarity index 100% rename from drivers/media/video/zoran/zr36060.h rename to drivers/media/pci/zoran/zr36060.h diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..f588d6296c769bbad1f2222a98bd3394cf1b6aa4 --- /dev/null +++ b/drivers/media/platform/Kconfig @@ -0,0 +1,223 @@ +# +# Platform drivers +# All drivers here are currently for webcam support + +menuconfig V4L_PLATFORM_DRIVERS + bool "V4L platform devices" + depends on MEDIA_CAMERA_SUPPORT + default n + ---help--- + Say Y here to enable support for platform-specific V4L drivers. + +if V4L_PLATFORM_DRIVERS + +source "drivers/media/platform/marvell-ccic/Kconfig" + +config VIDEO_VIA_CAMERA + tristate "VIAFB camera controller support" + depends on FB_VIA + select VIDEOBUF_DMA_SG + select VIDEO_OV7670 + help + Driver support for the integrated camera controller in VIA + Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems + with ov7670 sensors. + +# +# Platform multimedia device configuration +# + +source "drivers/media/platform/davinci/Kconfig" + +source "drivers/media/platform/omap/Kconfig" + +source "drivers/media/platform/blackfin/Kconfig" + +config VIDEO_SH_VOU + tristate "SuperH VOU video output driver" + depends on MEDIA_CAMERA_SUPPORT + depends on VIDEO_DEV && ARCH_SHMOBILE + select VIDEOBUF_DMA_CONTIG + help + Support for the Video Output Unit (VOU) on SuperH SoCs. + +config VIDEO_VIU + tristate "Freescale VIU Video Driver" + depends on VIDEO_V4L2 && PPC_MPC512x + select VIDEOBUF_DMA_CONTIG + default y + ---help--- + Support for Freescale VIU video driver. This device captures + video data, or overlays video on DIU frame buffer. + + Say Y here if you want to enable VIU device on MPC5121e Rev2+. + In doubt, say N. + +config VIDEO_TIMBERDALE + tristate "Support for timberdale Video In/LogiWIN" + depends on VIDEO_V4L2 && I2C && DMADEVICES + select DMA_ENGINE + select TIMB_DMA + select VIDEO_ADV7180 + select VIDEOBUF_DMA_CONTIG + ---help--- + Add support for the Video In peripherial of the timberdale FPGA. + +config VIDEO_VINO + tristate "SGI Vino Video For Linux" + depends on I2C && SGI_IP22 && VIDEO_V4L2 + select VIDEO_SAA7191 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to build in support for the Vino video input system found + on SGI Indy machines. + +config VIDEO_M32R_AR + tristate "AR devices" + depends on M32R && VIDEO_V4L2 + ---help--- + This is a video4linux driver for the Renesas AR (Artificial Retina) + camera module. + +config VIDEO_M32R_AR_M64278 + tristate "AR device with color module M64278(VGA)" + depends on PLAT_M32700UT + select VIDEO_M32R_AR + ---help--- + This is a video4linux driver for the Renesas AR (Artificial + Retina) with M64278E-800 camera module. + This module supports VGA(640x480 pixels) resolutions. + + To compile this driver as a module, choose M here: the + module will be called arv. + +config VIDEO_OMAP2 + tristate "OMAP2 Camera Capture Interface driver" + depends on VIDEO_DEV && ARCH_OMAP2 + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the TI OMAP2 camera capture interface + +config VIDEO_OMAP3 + tristate "OMAP 3 Camera support (EXPERIMENTAL)" + depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL + ---help--- + Driver for an OMAP 3 camera controller. + +config VIDEO_OMAP3_DEBUG + bool "OMAP 3 Camera debug messages" + depends on VIDEO_OMAP3 + ---help--- + Enable debug messages on OMAP 3 camera controller driver. + +source "drivers/media/platform/soc_camera/Kconfig" +source "drivers/media/platform/s5p-fimc/Kconfig" +source "drivers/media/platform/s5p-tv/Kconfig" + +endif # V4L_PLATFORM_DRIVERS + +menuconfig V4L_MEM2MEM_DRIVERS + bool "Memory-to-memory multimedia devices" + depends on VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + default n + ---help--- + Say Y here to enable selecting drivers for V4L devices that + use system memory for both source and destination buffers, as opposed + to capture and output drivers, which use memory buffers for just + one of those. + +if V4L_MEM2MEM_DRIVERS + +config VIDEO_CODA + tristate "Chips&Media Coda multi-standard codec IP" + depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + select IRAM_ALLOC if SOC_IMX53 + ---help--- + Coda is a range of video codec IPs that supports + H.264, MPEG-4, and other video formats. + +config VIDEO_MEM2MEM_DEINTERLACE + tristate "Deinterlace support" + depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + Generic deinterlacing V4L2 driver. + +config VIDEO_SAMSUNG_S5P_G2D + tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + default n + ---help--- + This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D + 2d graphics accelerator. + +config VIDEO_SAMSUNG_S5P_JPEG + tristate "Samsung S5P/Exynos4 JPEG codec driver (EXPERIMENTAL)" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P && EXPERIMENTAL + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + ---help--- + This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec + +config VIDEO_SAMSUNG_S5P_MFC + tristate "Samsung S5P MFC 5.1 Video Codec" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + select VIDEOBUF2_DMA_CONTIG + default n + help + MFC 5.1 driver for V4L2. + +config VIDEO_MX2_EMMAPRP + tristate "MX2 eMMa-PrP support" + depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27 + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + MX2X chips have a PrP that can be used to process buffers from + memory to memory. Operations include resizing and format + conversion. + +config VIDEO_SAMSUNG_EXYNOS_GSC + tristate "Samsung Exynos G-Scaler driver" + depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_EXYNOS5 + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler. + +endif # V4L_MEM2MEM_DRIVERS + +menuconfig V4L_TEST_DRIVERS + bool "Media test drivers" + depends on MEDIA_CAMERA_SUPPORT + +if V4L_TEST_DRIVERS +config VIDEO_VIVI + tristate "Virtual Video Driver" + depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE + select FONT_8x16 + select VIDEOBUF2_VMALLOC + default n + ---help--- + Enables a virtual video driver. This device shows a color bar + and a timestamp, as a real device would generate by using V4L2 + api. + Say Y here if you want to test video apps or debug V4L devices. + In doubt, say N. + +config VIDEO_MEM2MEM_TESTDEV + tristate "Virtual test device for mem2mem framework" + depends on VIDEO_DEV && VIDEO_V4L2 + select VIDEOBUF2_VMALLOC + select V4L2_MEM2MEM_DEV + default n + ---help--- + This is a virtual test device for the memory-to-memory driver + framework. +endif #V4L_TEST_DRIVERS diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..baaa55026c8ea7b71d7821fd97606ecb75dc9dfb --- /dev/null +++ b/drivers/media/platform/Makefile @@ -0,0 +1,50 @@ +# +# Makefile for the video capture/playback device drivers. +# + +omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o + +obj-$(CONFIG_VIDEO_VINO) += indycam.o +obj-$(CONFIG_VIDEO_VINO) += vino.o + +obj-$(CONFIG_VIDEO_TIMBERDALE) += timblogiw.o +obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o + +obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o +obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/ +obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/ + +obj-$(CONFIG_VIDEO_OMAP2) += omap2cam.o +obj-$(CONFIG_VIDEO_OMAP3) += omap3isp/ + +obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o +obj-$(CONFIG_VIDEO_VIVI) += vivi.o + +obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o + +obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o +obj-$(CONFIG_VIDEO_CODA) += coda.o + +obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE) += m2m-deinterlace.o + +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) += s5p-fimc/ +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg/ +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/ +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV) += s5p-tv/ + +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D) += s5p-g2d/ +obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC) += exynos-gsc/ + +obj-$(CONFIG_BLACKFIN) += blackfin/ + +obj-$(CONFIG_ARCH_DAVINCI) += davinci/ + +obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o + +obj-$(CONFIG_SOC_CAMERA) += soc_camera/ + +obj-y += davinci/ + +obj-$(CONFIG_ARCH_OMAP) += omap/ + +ccflags-y += -I$(srctree)/drivers/media/i2c diff --git a/drivers/media/video/arv.c b/drivers/media/platform/arv.c similarity index 100% rename from drivers/media/video/arv.c rename to drivers/media/platform/arv.c diff --git a/drivers/media/video/blackfin/Kconfig b/drivers/media/platform/blackfin/Kconfig similarity index 100% rename from drivers/media/video/blackfin/Kconfig rename to drivers/media/platform/blackfin/Kconfig diff --git a/drivers/media/video/blackfin/Makefile b/drivers/media/platform/blackfin/Makefile similarity index 100% rename from drivers/media/video/blackfin/Makefile rename to drivers/media/platform/blackfin/Makefile diff --git a/drivers/media/video/blackfin/bfin_capture.c b/drivers/media/platform/blackfin/bfin_capture.c similarity index 98% rename from drivers/media/video/blackfin/bfin_capture.c rename to drivers/media/platform/blackfin/bfin_capture.c index 0aba45e34f70e57aee9128d721d6949f08c97018..cb2eb26850b179738b49975ea47d82cada2d0d11 100644 --- a/drivers/media/video/blackfin/bfin_capture.c +++ b/drivers/media/platform/blackfin/bfin_capture.c @@ -235,8 +235,13 @@ static int bcap_release(struct file *file) static int bcap_mmap(struct file *file, struct vm_area_struct *vma) { struct bcap_device *bcap_dev = video_drvdata(file); + int ret; - return vb2_mmap(&bcap_dev->buffer_queue, vma); + if (mutex_lock_interruptible(&bcap_dev->mutex)) + return -ERESTARTSYS; + ret = vb2_mmap(&bcap_dev->buffer_queue, vma); + mutex_unlock(&bcap_dev->mutex); + return ret; } #ifndef CONFIG_MMU @@ -259,8 +264,12 @@ static unsigned long bcap_get_unmapped_area(struct file *file, static unsigned int bcap_poll(struct file *file, poll_table *wait) { struct bcap_device *bcap_dev = video_drvdata(file); + unsigned int res; - return vb2_poll(&bcap_dev->buffer_queue, file, wait); + mutex_lock(&bcap_dev->mutex); + res = vb2_poll(&bcap_dev->buffer_queue, file, wait); + mutex_unlock(&bcap_dev->mutex); + return res; } static int bcap_queue_setup(struct vb2_queue *vq, @@ -942,10 +951,6 @@ static int __devinit bcap_probe(struct platform_device *pdev) INIT_LIST_HEAD(&bcap_dev->dma_queue); vfd->lock = &bcap_dev->mutex; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vfd->flags); /* register video device */ ret = video_register_device(bcap_dev->video_dev, VFL_TYPE_GRABBER, -1); @@ -963,6 +968,7 @@ static int __devinit bcap_probe(struct platform_device *pdev) if (!i2c_adap) { v4l2_err(&bcap_dev->v4l2_dev, "Unable to find i2c adapter\n"); + ret = -ENODEV; goto err_unreg_vdev; } diff --git a/drivers/media/video/blackfin/ppi.c b/drivers/media/platform/blackfin/ppi.c similarity index 100% rename from drivers/media/video/blackfin/ppi.c rename to drivers/media/platform/blackfin/ppi.c diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c new file mode 100644 index 0000000000000000000000000000000000000000..cd04ae252c301991d73eebfeb2727e6752d7b9e8 --- /dev/null +++ b/drivers/media/platform/coda.c @@ -0,0 +1,2049 @@ +/* + * Coda multi-standard codec IP + * + * Copyright (C) 2012 Vista Silicon S.L. + * Javier Martin, + * Xavier Duret + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "coda.h" + +#define CODA_NAME "coda" + +#define CODA_MAX_INSTANCES 4 + +#define CODA_FMO_BUF_SIZE 32 +#define CODADX6_WORK_BUF_SIZE (288 * 1024 + CODA_FMO_BUF_SIZE * 8 * 1024) +#define CODA7_WORK_BUF_SIZE (512 * 1024 + CODA_FMO_BUF_SIZE * 8 * 1024) +#define CODA_PARA_BUF_SIZE (10 * 1024) +#define CODA_ISRAM_SIZE (2048 * 2) +#define CODA7_IRAM_SIZE 0x14000 /* 81920 bytes */ + +#define CODA_MAX_FRAMEBUFFERS 2 + +#define MAX_W 720 +#define MAX_H 576 +#define CODA_MAX_FRAME_SIZE 0x90000 +#define FMO_SLICE_SAVE_BUF_SIZE (32) +#define CODA_DEFAULT_GAMMA 4096 + +#define MIN_W 176 +#define MIN_H 144 +#define MAX_W 720 +#define MAX_H 576 + +#define S_ALIGN 1 /* multiple of 2 */ +#define W_ALIGN 1 /* multiple of 2 */ +#define H_ALIGN 1 /* multiple of 2 */ + +#define fh_to_ctx(__fh) container_of(__fh, struct coda_ctx, fh) + +static int coda_debug; +module_param(coda_debug, int, 0); +MODULE_PARM_DESC(coda_debug, "Debug level (0-1)"); + +enum { + V4L2_M2M_SRC = 0, + V4L2_M2M_DST = 1, +}; + +enum coda_fmt_type { + CODA_FMT_ENC, + CODA_FMT_RAW, +}; + +enum coda_inst_type { + CODA_INST_ENCODER, + CODA_INST_DECODER, +}; + +enum coda_product { + CODA_DX6 = 0xf001, + CODA_7541 = 0xf012, +}; + +struct coda_fmt { + char *name; + u32 fourcc; + enum coda_fmt_type type; +}; + +struct coda_devtype { + char *firmware; + enum coda_product product; + struct coda_fmt *formats; + unsigned int num_formats; + size_t workbuf_size; +}; + +/* Per-queue, driver-specific private data */ +struct coda_q_data { + unsigned int width; + unsigned int height; + unsigned int sizeimage; + struct coda_fmt *fmt; +}; + +struct coda_aux_buf { + void *vaddr; + dma_addr_t paddr; + u32 size; +}; + +struct coda_dev { + struct v4l2_device v4l2_dev; + struct video_device vfd; + struct platform_device *plat_dev; + const struct coda_devtype *devtype; + + void __iomem *regs_base; + struct clk *clk_per; + struct clk *clk_ahb; + + struct coda_aux_buf codebuf; + struct coda_aux_buf workbuf; + long unsigned int iram_paddr; + + spinlock_t irqlock; + struct mutex dev_mutex; + struct v4l2_m2m_dev *m2m_dev; + struct vb2_alloc_ctx *alloc_ctx; + struct list_head instances; + unsigned long instance_mask; + struct delayed_work timeout; + struct completion done; +}; + +struct coda_params { + u8 rot_mode; + u8 h264_intra_qp; + u8 h264_inter_qp; + u8 mpeg4_intra_qp; + u8 mpeg4_inter_qp; + u8 gop_size; + int codec_mode; + enum v4l2_mpeg_video_multi_slice_mode slice_mode; + u32 framerate; + u16 bitrate; + u32 slice_max_bits; + u32 slice_max_mb; +}; + +struct coda_ctx { + struct coda_dev *dev; + struct list_head list; + int aborting; + int rawstreamon; + int compstreamon; + u32 isequence; + struct coda_q_data q_data[2]; + enum coda_inst_type inst_type; + enum v4l2_colorspace colorspace; + struct coda_params params; + struct v4l2_m2m_ctx *m2m_ctx; + struct v4l2_ctrl_handler ctrls; + struct v4l2_fh fh; + int gopcounter; + char vpu_header[3][64]; + int vpu_header_size[3]; + struct coda_aux_buf parabuf; + struct coda_aux_buf internal_frames[CODA_MAX_FRAMEBUFFERS]; + int num_internal_frames; + int idx; +}; + +static inline void coda_write(struct coda_dev *dev, u32 data, u32 reg) +{ + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, + "%s: data=0x%x, reg=0x%x\n", __func__, data, reg); + writel(data, dev->regs_base + reg); +} + +static inline unsigned int coda_read(struct coda_dev *dev, u32 reg) +{ + u32 data; + data = readl(dev->regs_base + reg); + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, + "%s: data=0x%x, reg=0x%x\n", __func__, data, reg); + return data; +} + +static inline unsigned long coda_isbusy(struct coda_dev *dev) +{ + return coda_read(dev, CODA_REG_BIT_BUSY); +} + +static inline int coda_is_initialized(struct coda_dev *dev) +{ + return (coda_read(dev, CODA_REG_BIT_CUR_PC) != 0); +} + +static int coda_wait_timeout(struct coda_dev *dev) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + + while (coda_isbusy(dev)) { + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + } + return 0; +} + +static void coda_command_async(struct coda_ctx *ctx, int cmd) +{ + struct coda_dev *dev = ctx->dev; + coda_write(dev, CODA_REG_BIT_BUSY_FLAG, CODA_REG_BIT_BUSY); + + coda_write(dev, ctx->idx, CODA_REG_BIT_RUN_INDEX); + coda_write(dev, ctx->params.codec_mode, CODA_REG_BIT_RUN_COD_STD); + coda_write(dev, cmd, CODA_REG_BIT_RUN_COMMAND); +} + +static int coda_command_sync(struct coda_ctx *ctx, int cmd) +{ + struct coda_dev *dev = ctx->dev; + + coda_command_async(ctx, cmd); + return coda_wait_timeout(dev); +} + +static struct coda_q_data *get_q_data(struct coda_ctx *ctx, + enum v4l2_buf_type type) +{ + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + return &(ctx->q_data[V4L2_M2M_SRC]); + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &(ctx->q_data[V4L2_M2M_DST]); + default: + BUG(); + } + return NULL; +} + +/* + * Add one array of supported formats for each version of Coda: + * i.MX27 -> codadx6 + * i.MX51 -> coda7 + * i.MX6 -> coda960 + */ +static struct coda_fmt codadx6_formats[] = { + { + .name = "YUV 4:2:0 Planar", + .fourcc = V4L2_PIX_FMT_YUV420, + .type = CODA_FMT_RAW, + }, + { + .name = "H264 Encoded Stream", + .fourcc = V4L2_PIX_FMT_H264, + .type = CODA_FMT_ENC, + }, + { + .name = "MPEG4 Encoded Stream", + .fourcc = V4L2_PIX_FMT_MPEG4, + .type = CODA_FMT_ENC, + }, +}; + +static struct coda_fmt coda7_formats[] = { + { + .name = "YUV 4:2:0 Planar", + .fourcc = V4L2_PIX_FMT_YUV420, + .type = CODA_FMT_RAW, + }, + { + .name = "H264 Encoded Stream", + .fourcc = V4L2_PIX_FMT_H264, + .type = CODA_FMT_ENC, + }, + { + .name = "MPEG4 Encoded Stream", + .fourcc = V4L2_PIX_FMT_MPEG4, + .type = CODA_FMT_ENC, + }, +}; + +static struct coda_fmt *find_format(struct coda_dev *dev, struct v4l2_format *f) +{ + struct coda_fmt *formats = dev->devtype->formats; + int num_formats = dev->devtype->num_formats; + unsigned int k; + + for (k = 0; k < num_formats; k++) { + if (formats[k].fourcc == f->fmt.pix.pixelformat) + break; + } + + if (k == num_formats) + return NULL; + + return &formats[k]; +} + +/* + * V4L2 ioctl() operations. + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strlcpy(cap->driver, CODA_NAME, sizeof(cap->driver)); + strlcpy(cap->card, CODA_NAME, sizeof(cap->card)); + strlcpy(cap->bus_info, CODA_NAME, sizeof(cap->bus_info)); + /* + * This is only a mem-to-mem video device. The capture and output + * device capability flags are left only for backward compatibility + * and are scheduled for removal. + */ + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | + V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + + return 0; +} + +static int enum_fmt(void *priv, struct v4l2_fmtdesc *f, + enum coda_fmt_type type) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + struct coda_dev *dev = ctx->dev; + struct coda_fmt *formats = dev->devtype->formats; + struct coda_fmt *fmt; + int num_formats = dev->devtype->num_formats; + int i, num = 0; + + for (i = 0; i < num_formats; i++) { + if (formats[i].type == type) { + if (num == f->index) + break; + ++num; + } + } + + if (i < num_formats) { + fmt = &formats[i]; + strlcpy(f->description, fmt->name, sizeof(f->description)); + f->pixelformat = fmt->fourcc; + return 0; + } + + /* Format not found */ + return -EINVAL; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(priv, f, CODA_FMT_ENC); +} + +static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(priv, f, CODA_FMT_RAW); +} + +static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct vb2_queue *vq; + struct coda_q_data *q_data; + struct coda_ctx *ctx = fh_to_ctx(priv); + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + + f->fmt.pix.field = V4L2_FIELD_NONE; + f->fmt.pix.pixelformat = q_data->fmt->fourcc; + f->fmt.pix.width = q_data->width; + f->fmt.pix.height = q_data->height; + if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUV420) + f->fmt.pix.bytesperline = round_up(f->fmt.pix.width, 2); + else /* encoded formats h.264/mpeg4 */ + f->fmt.pix.bytesperline = 0; + + f->fmt.pix.sizeimage = q_data->sizeimage; + f->fmt.pix.colorspace = ctx->colorspace; + + return 0; +} + +static int vidioc_try_fmt(struct coda_dev *dev, struct v4l2_format *f) +{ + enum v4l2_field field; + + field = f->fmt.pix.field; + if (field == V4L2_FIELD_ANY) + field = V4L2_FIELD_NONE; + else if (V4L2_FIELD_NONE != field) + return -EINVAL; + + /* V4L2 specification suggests the driver corrects the format struct + * if any of the dimensions is unsupported */ + f->fmt.pix.field = field; + + if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUV420) { + v4l_bound_align_image(&f->fmt.pix.width, MIN_W, MAX_W, + W_ALIGN, &f->fmt.pix.height, + MIN_H, MAX_H, H_ALIGN, S_ALIGN); + f->fmt.pix.bytesperline = round_up(f->fmt.pix.width, 2); + f->fmt.pix.sizeimage = f->fmt.pix.width * + f->fmt.pix.height * 3 / 2; + } else { /*encoded formats h.264/mpeg4 */ + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = CODA_MAX_FRAME_SIZE; + } + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + struct coda_fmt *fmt; + struct coda_ctx *ctx = fh_to_ctx(priv); + + fmt = find_format(ctx->dev, f); + /* + * Since decoding support is not implemented yet do not allow + * CODA_FMT_RAW formats in the capture interface. + */ + if (!fmt || !(fmt->type == CODA_FMT_ENC)) + f->fmt.pix.pixelformat = V4L2_PIX_FMT_H264; + + f->fmt.pix.colorspace = ctx->colorspace; + + ret = vidioc_try_fmt(ctx->dev, f); + if (ret < 0) + return ret; + + return 0; +} + +static int vidioc_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + struct coda_fmt *fmt; + int ret; + + fmt = find_format(ctx->dev, f); + /* + * Since decoding support is not implemented yet do not allow + * CODA_FMT formats in the capture interface. + */ + if (!fmt || !(fmt->type == CODA_FMT_RAW)) + f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUV420; + + if (!f->fmt.pix.colorspace) + f->fmt.pix.colorspace = V4L2_COLORSPACE_REC709; + + ret = vidioc_try_fmt(ctx->dev, f); + if (ret < 0) + return ret; + + return 0; +} + +static int vidioc_s_fmt(struct coda_ctx *ctx, struct v4l2_format *f) +{ + struct coda_q_data *q_data; + struct vb2_queue *vq; + int ret; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + if (!q_data) + return -EINVAL; + + if (vb2_is_busy(vq)) { + v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__); + return -EBUSY; + } + + ret = vidioc_try_fmt(ctx->dev, f); + if (ret) + return ret; + + q_data->fmt = find_format(ctx->dev, f); + q_data->width = f->fmt.pix.width; + q_data->height = f->fmt.pix.height; + q_data->sizeimage = f->fmt.pix.sizeimage; + + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "Setting format for type %d, wxh: %dx%d, fmt: %d\n", + f->type, q_data->width, q_data->height, q_data->fmt->fourcc); + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = vidioc_try_fmt_vid_cap(file, priv, f); + if (ret) + return ret; + + return vidioc_s_fmt(fh_to_ctx(priv), f); +} + +static int vidioc_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + int ret; + + ret = vidioc_try_fmt_vid_out(file, priv, f); + if (ret) + return ret; + + ret = vidioc_s_fmt(ctx, f); + if (ret) + ctx->colorspace = f->fmt.pix.colorspace; + + return ret; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct coda_ctx *ctx = fh_to_ctx(priv); + + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); +} + +static const struct v4l2_ioctl_ops coda_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = vidioc_g_fmt, + .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, + .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, + + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, +}; + +/* + * Mem-to-mem operations. + */ +static void coda_device_run(void *m2m_priv) +{ + struct coda_ctx *ctx = m2m_priv; + struct coda_q_data *q_data_src, *q_data_dst; + struct vb2_buffer *src_buf, *dst_buf; + struct coda_dev *dev = ctx->dev; + int force_ipicture; + int quant_param = 0; + u32 picture_y, picture_cb, picture_cr; + u32 pic_stream_buffer_addr, pic_stream_buffer_size; + u32 dst_fourcc; + + src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + q_data_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + q_data_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + dst_fourcc = q_data_dst->fmt->fourcc; + + src_buf->v4l2_buf.sequence = ctx->isequence; + dst_buf->v4l2_buf.sequence = ctx->isequence; + ctx->isequence++; + + /* + * Workaround coda firmware BUG that only marks the first + * frame as IDR. This is a problem for some decoders that can't + * recover when a frame is lost. + */ + if (src_buf->v4l2_buf.sequence % ctx->params.gop_size) { + src_buf->v4l2_buf.flags |= V4L2_BUF_FLAG_PFRAME; + src_buf->v4l2_buf.flags &= ~V4L2_BUF_FLAG_KEYFRAME; + } else { + src_buf->v4l2_buf.flags |= V4L2_BUF_FLAG_KEYFRAME; + src_buf->v4l2_buf.flags &= ~V4L2_BUF_FLAG_PFRAME; + } + + /* + * Copy headers at the beginning of the first frame for H.264 only. + * In MPEG4 they are already copied by the coda. + */ + if (src_buf->v4l2_buf.sequence == 0) { + pic_stream_buffer_addr = + vb2_dma_contig_plane_dma_addr(dst_buf, 0) + + ctx->vpu_header_size[0] + + ctx->vpu_header_size[1] + + ctx->vpu_header_size[2]; + pic_stream_buffer_size = CODA_MAX_FRAME_SIZE - + ctx->vpu_header_size[0] - + ctx->vpu_header_size[1] - + ctx->vpu_header_size[2]; + memcpy(vb2_plane_vaddr(dst_buf, 0), + &ctx->vpu_header[0][0], ctx->vpu_header_size[0]); + memcpy(vb2_plane_vaddr(dst_buf, 0) + ctx->vpu_header_size[0], + &ctx->vpu_header[1][0], ctx->vpu_header_size[1]); + memcpy(vb2_plane_vaddr(dst_buf, 0) + ctx->vpu_header_size[0] + + ctx->vpu_header_size[1], &ctx->vpu_header[2][0], + ctx->vpu_header_size[2]); + } else { + pic_stream_buffer_addr = + vb2_dma_contig_plane_dma_addr(dst_buf, 0); + pic_stream_buffer_size = CODA_MAX_FRAME_SIZE; + } + + if (src_buf->v4l2_buf.flags & V4L2_BUF_FLAG_KEYFRAME) { + force_ipicture = 1; + switch (dst_fourcc) { + case V4L2_PIX_FMT_H264: + quant_param = ctx->params.h264_intra_qp; + break; + case V4L2_PIX_FMT_MPEG4: + quant_param = ctx->params.mpeg4_intra_qp; + break; + default: + v4l2_warn(&ctx->dev->v4l2_dev, + "cannot set intra qp, fmt not supported\n"); + break; + } + } else { + force_ipicture = 0; + switch (dst_fourcc) { + case V4L2_PIX_FMT_H264: + quant_param = ctx->params.h264_inter_qp; + break; + case V4L2_PIX_FMT_MPEG4: + quant_param = ctx->params.mpeg4_inter_qp; + break; + default: + v4l2_warn(&ctx->dev->v4l2_dev, + "cannot set inter qp, fmt not supported\n"); + break; + } + } + + /* submit */ + coda_write(dev, CODA_ROT_MIR_ENABLE | ctx->params.rot_mode, CODA_CMD_ENC_PIC_ROT_MODE); + coda_write(dev, quant_param, CODA_CMD_ENC_PIC_QS); + + + picture_y = vb2_dma_contig_plane_dma_addr(src_buf, 0); + picture_cb = picture_y + q_data_src->width * q_data_src->height; + picture_cr = picture_cb + q_data_src->width / 2 * + q_data_src->height / 2; + + coda_write(dev, picture_y, CODA_CMD_ENC_PIC_SRC_ADDR_Y); + coda_write(dev, picture_cb, CODA_CMD_ENC_PIC_SRC_ADDR_CB); + coda_write(dev, picture_cr, CODA_CMD_ENC_PIC_SRC_ADDR_CR); + coda_write(dev, force_ipicture << 1 & 0x2, + CODA_CMD_ENC_PIC_OPTION); + + coda_write(dev, pic_stream_buffer_addr, CODA_CMD_ENC_PIC_BB_START); + coda_write(dev, pic_stream_buffer_size / 1024, + CODA_CMD_ENC_PIC_BB_SIZE); + + if (dev->devtype->product == CODA_7541) { + coda_write(dev, CODA7_USE_BIT_ENABLE | CODA7_USE_HOST_BIT_ENABLE | + CODA7_USE_ME_ENABLE | CODA7_USE_HOST_ME_ENABLE, + CODA7_REG_BIT_AXI_SRAM_USE); + } + + /* 1 second timeout in case CODA locks up */ + schedule_delayed_work(&dev->timeout, HZ); + + INIT_COMPLETION(dev->done); + coda_command_async(ctx, CODA_COMMAND_PIC_RUN); +} + +static int coda_job_ready(void *m2m_priv) +{ + struct coda_ctx *ctx = m2m_priv; + + /* + * For both 'P' and 'key' frame cases 1 picture + * and 1 frame are needed. + */ + if (!v4l2_m2m_num_src_bufs_ready(ctx->m2m_ctx) || + !v4l2_m2m_num_dst_bufs_ready(ctx->m2m_ctx)) { + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "not ready: not enough video buffers.\n"); + return 0; + } + + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "job ready\n"); + return 1; +} + +static void coda_job_abort(void *priv) +{ + struct coda_ctx *ctx = priv; + struct coda_dev *dev = ctx->dev; + + ctx->aborting = 1; + + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "Aborting task\n"); + + v4l2_m2m_job_finish(dev->m2m_dev, ctx->m2m_ctx); +} + +static void coda_lock(void *m2m_priv) +{ + struct coda_ctx *ctx = m2m_priv; + struct coda_dev *pcdev = ctx->dev; + mutex_lock(&pcdev->dev_mutex); +} + +static void coda_unlock(void *m2m_priv) +{ + struct coda_ctx *ctx = m2m_priv; + struct coda_dev *pcdev = ctx->dev; + mutex_unlock(&pcdev->dev_mutex); +} + +static struct v4l2_m2m_ops coda_m2m_ops = { + .device_run = coda_device_run, + .job_ready = coda_job_ready, + .job_abort = coda_job_abort, + .lock = coda_lock, + .unlock = coda_unlock, +}; + +static void set_default_params(struct coda_ctx *ctx) +{ + struct coda_dev *dev = ctx->dev; + + ctx->params.codec_mode = CODA_MODE_INVALID; + ctx->colorspace = V4L2_COLORSPACE_REC709; + ctx->params.framerate = 30; + ctx->aborting = 0; + + /* Default formats for output and input queues */ + ctx->q_data[V4L2_M2M_SRC].fmt = &dev->devtype->formats[0]; + ctx->q_data[V4L2_M2M_DST].fmt = &dev->devtype->formats[1]; + ctx->q_data[V4L2_M2M_SRC].width = MAX_W; + ctx->q_data[V4L2_M2M_SRC].height = MAX_H; + ctx->q_data[V4L2_M2M_SRC].sizeimage = (MAX_W * MAX_H * 3) / 2; + ctx->q_data[V4L2_M2M_DST].width = MAX_W; + ctx->q_data[V4L2_M2M_DST].height = MAX_H; + ctx->q_data[V4L2_M2M_DST].sizeimage = CODA_MAX_FRAME_SIZE; +} + +/* + * Queue operations + */ +static int coda_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(vq); + struct coda_q_data *q_data; + unsigned int size; + + q_data = get_q_data(ctx, vq->type); + size = q_data->sizeimage; + + *nplanes = 1; + sizes[0] = size; + + alloc_ctxs[0] = ctx->dev->alloc_ctx; + + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "get %d buffer(s) of size %d each.\n", *nbuffers, size); + + return 0; +} + +static int coda_buf_prepare(struct vb2_buffer *vb) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct coda_q_data *q_data; + + q_data = get_q_data(ctx, vb->vb2_queue->type); + + if (vb2_plane_size(vb, 0) < q_data->sizeimage) { + v4l2_warn(&ctx->dev->v4l2_dev, + "%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), + (long)q_data->sizeimage); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, q_data->sizeimage); + + return 0; +} + +static void coda_buf_queue(struct vb2_buffer *vb) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} + +static void coda_wait_prepare(struct vb2_queue *q) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(q); + coda_unlock(ctx); +} + +static void coda_wait_finish(struct vb2_queue *q) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(q); + coda_lock(ctx); +} + +static void coda_free_framebuffers(struct coda_ctx *ctx) +{ + int i; + + for (i = 0; i < CODA_MAX_FRAMEBUFFERS; i++) { + if (ctx->internal_frames[i].vaddr) { + dma_free_coherent(&ctx->dev->plat_dev->dev, + ctx->internal_frames[i].size, + ctx->internal_frames[i].vaddr, + ctx->internal_frames[i].paddr); + ctx->internal_frames[i].vaddr = NULL; + } + } +} + +static int coda_alloc_framebuffers(struct coda_ctx *ctx, struct coda_q_data *q_data, u32 fourcc) +{ + struct coda_dev *dev = ctx->dev; + + int height = q_data->height; + int width = q_data->width; + u32 *p; + int i; + + /* Allocate frame buffers */ + ctx->num_internal_frames = CODA_MAX_FRAMEBUFFERS; + for (i = 0; i < ctx->num_internal_frames; i++) { + ctx->internal_frames[i].size = q_data->sizeimage; + if (fourcc == V4L2_PIX_FMT_H264 && dev->devtype->product != CODA_DX6) + ctx->internal_frames[i].size += width / 2 * height / 2; + ctx->internal_frames[i].vaddr = dma_alloc_coherent( + &dev->plat_dev->dev, ctx->internal_frames[i].size, + &ctx->internal_frames[i].paddr, GFP_KERNEL); + if (!ctx->internal_frames[i].vaddr) { + coda_free_framebuffers(ctx); + return -ENOMEM; + } + } + + /* Register frame buffers in the parameter buffer */ + p = ctx->parabuf.vaddr; + + if (dev->devtype->product == CODA_DX6) { + for (i = 0; i < ctx->num_internal_frames; i++) { + p[i * 3] = ctx->internal_frames[i].paddr; /* Y */ + p[i * 3 + 1] = p[i * 3] + width * height; /* Cb */ + p[i * 3 + 2] = p[i * 3 + 1] + width / 2 * height / 2; /* Cr */ + } + } else { + for (i = 0; i < ctx->num_internal_frames; i += 2) { + p[i * 3 + 1] = ctx->internal_frames[i].paddr; /* Y */ + p[i * 3] = p[i * 3 + 1] + width * height; /* Cb */ + p[i * 3 + 3] = p[i * 3] + (width / 2) * (height / 2); /* Cr */ + + if (fourcc == V4L2_PIX_FMT_H264) + p[96 + i + 1] = p[i * 3 + 3] + (width / 2) * (height / 2); + + if (i + 1 < ctx->num_internal_frames) { + p[i * 3 + 2] = ctx->internal_frames[i+1].paddr; /* Y */ + p[i * 3 + 5] = p[i * 3 + 2] + width * height ; /* Cb */ + p[i * 3 + 4] = p[i * 3 + 5] + (width / 2) * (height / 2); /* Cr */ + + if (fourcc == V4L2_PIX_FMT_H264) + p[96 + i] = p[i * 3 + 4] + (width / 2) * (height / 2); + } + } + } + + return 0; +} + +static int coda_start_streaming(struct vb2_queue *q, unsigned int count) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(q); + struct v4l2_device *v4l2_dev = &ctx->dev->v4l2_dev; + u32 bitstream_buf, bitstream_size; + struct coda_dev *dev = ctx->dev; + struct coda_q_data *q_data_src, *q_data_dst; + struct vb2_buffer *buf; + u32 dst_fourcc; + u32 value; + int ret; + + if (count < 1) + return -EINVAL; + + if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) + ctx->rawstreamon = 1; + else + ctx->compstreamon = 1; + + /* Don't start the coda unless both queues are on */ + if (!(ctx->rawstreamon & ctx->compstreamon)) + return 0; + + if (coda_isbusy(dev)) + if (wait_for_completion_interruptible_timeout(&dev->done, HZ) <= 0) + return -EBUSY; + + ctx->gopcounter = ctx->params.gop_size - 1; + + q_data_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + bitstream_buf = vb2_dma_contig_plane_dma_addr(buf, 0); + q_data_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + bitstream_size = q_data_dst->sizeimage; + dst_fourcc = q_data_dst->fmt->fourcc; + + /* Find out whether coda must encode or decode */ + if (q_data_src->fmt->type == CODA_FMT_RAW && + q_data_dst->fmt->type == CODA_FMT_ENC) { + ctx->inst_type = CODA_INST_ENCODER; + } else if (q_data_src->fmt->type == CODA_FMT_ENC && + q_data_dst->fmt->type == CODA_FMT_RAW) { + ctx->inst_type = CODA_INST_DECODER; + v4l2_err(v4l2_dev, "decoding not supported.\n"); + return -EINVAL; + } else { + v4l2_err(v4l2_dev, "couldn't tell instance type.\n"); + return -EINVAL; + } + + if (!coda_is_initialized(dev)) { + v4l2_err(v4l2_dev, "coda is not initialized.\n"); + return -EFAULT; + } + coda_write(dev, ctx->parabuf.paddr, CODA_REG_BIT_PARA_BUF_ADDR); + coda_write(dev, bitstream_buf, CODA_REG_BIT_RD_PTR(ctx->idx)); + coda_write(dev, bitstream_buf, CODA_REG_BIT_WR_PTR(ctx->idx)); + switch (dev->devtype->product) { + case CODA_DX6: + coda_write(dev, CODADX6_STREAM_BUF_DYNALLOC_EN | + CODADX6_STREAM_BUF_PIC_RESET, CODA_REG_BIT_STREAM_CTRL); + break; + default: + coda_write(dev, CODA7_STREAM_BUF_DYNALLOC_EN | + CODA7_STREAM_BUF_PIC_RESET, CODA_REG_BIT_STREAM_CTRL); + } + + if (dev->devtype->product == CODA_DX6) { + /* Configure the coda */ + coda_write(dev, dev->iram_paddr, CODADX6_REG_BIT_SEARCH_RAM_BASE_ADDR); + } + + /* Could set rotation here if needed */ + switch (dev->devtype->product) { + case CODA_DX6: + value = (q_data_src->width & CODADX6_PICWIDTH_MASK) << CODADX6_PICWIDTH_OFFSET; + break; + default: + value = (q_data_src->width & CODA7_PICWIDTH_MASK) << CODA7_PICWIDTH_OFFSET; + } + value |= (q_data_src->height & CODA_PICHEIGHT_MASK) << CODA_PICHEIGHT_OFFSET; + coda_write(dev, value, CODA_CMD_ENC_SEQ_SRC_SIZE); + coda_write(dev, ctx->params.framerate, + CODA_CMD_ENC_SEQ_SRC_F_RATE); + + switch (dst_fourcc) { + case V4L2_PIX_FMT_MPEG4: + if (dev->devtype->product == CODA_DX6) + ctx->params.codec_mode = CODADX6_MODE_ENCODE_MP4; + else + ctx->params.codec_mode = CODA7_MODE_ENCODE_MP4; + + coda_write(dev, CODA_STD_MPEG4, CODA_CMD_ENC_SEQ_COD_STD); + coda_write(dev, 0, CODA_CMD_ENC_SEQ_MP4_PARA); + break; + case V4L2_PIX_FMT_H264: + if (dev->devtype->product == CODA_DX6) + ctx->params.codec_mode = CODADX6_MODE_ENCODE_H264; + else + ctx->params.codec_mode = CODA7_MODE_ENCODE_H264; + + coda_write(dev, CODA_STD_H264, CODA_CMD_ENC_SEQ_COD_STD); + coda_write(dev, 0, CODA_CMD_ENC_SEQ_264_PARA); + break; + default: + v4l2_err(v4l2_dev, + "dst format (0x%08x) invalid.\n", dst_fourcc); + return -EINVAL; + } + + switch (ctx->params.slice_mode) { + case V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE: + value = 0; + break; + case V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB: + value = (ctx->params.slice_max_mb & CODA_SLICING_SIZE_MASK) << CODA_SLICING_SIZE_OFFSET; + value |= (1 & CODA_SLICING_UNIT_MASK) << CODA_SLICING_UNIT_OFFSET; + value |= 1 & CODA_SLICING_MODE_MASK; + break; + case V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES: + value = (ctx->params.slice_max_bits & CODA_SLICING_SIZE_MASK) << CODA_SLICING_SIZE_OFFSET; + value |= (0 & CODA_SLICING_UNIT_MASK) << CODA_SLICING_UNIT_OFFSET; + value |= 1 & CODA_SLICING_MODE_MASK; + break; + } + coda_write(dev, value, CODA_CMD_ENC_SEQ_SLICE_MODE); + value = ctx->params.gop_size & CODA_GOP_SIZE_MASK; + coda_write(dev, value, CODA_CMD_ENC_SEQ_GOP_SIZE); + + if (ctx->params.bitrate) { + /* Rate control enabled */ + value = (ctx->params.bitrate & CODA_RATECONTROL_BITRATE_MASK) << CODA_RATECONTROL_BITRATE_OFFSET; + value |= 1 & CODA_RATECONTROL_ENABLE_MASK; + } else { + value = 0; + } + coda_write(dev, value, CODA_CMD_ENC_SEQ_RC_PARA); + + coda_write(dev, 0, CODA_CMD_ENC_SEQ_RC_BUF_SIZE); + coda_write(dev, 0, CODA_CMD_ENC_SEQ_INTRA_REFRESH); + + coda_write(dev, bitstream_buf, CODA_CMD_ENC_SEQ_BB_START); + coda_write(dev, bitstream_size / 1024, CODA_CMD_ENC_SEQ_BB_SIZE); + + /* set default gamma */ + value = (CODA_DEFAULT_GAMMA & CODA_GAMMA_MASK) << CODA_GAMMA_OFFSET; + coda_write(dev, value, CODA_CMD_ENC_SEQ_RC_GAMMA); + + value = (CODA_DEFAULT_GAMMA > 0) << CODA_OPTION_GAMMA_OFFSET; + value |= (0 & CODA_OPTION_SLICEREPORT_MASK) << CODA_OPTION_SLICEREPORT_OFFSET; + coda_write(dev, value, CODA_CMD_ENC_SEQ_OPTION); + + if (dst_fourcc == V4L2_PIX_FMT_H264) { + value = (FMO_SLICE_SAVE_BUF_SIZE << 7); + value |= (0 & CODA_FMOPARAM_TYPE_MASK) << CODA_FMOPARAM_TYPE_OFFSET; + value |= 0 & CODA_FMOPARAM_SLICENUM_MASK; + if (dev->devtype->product == CODA_DX6) { + coda_write(dev, value, CODADX6_CMD_ENC_SEQ_FMO); + } else { + coda_write(dev, dev->iram_paddr, CODA7_CMD_ENC_SEQ_SEARCH_BASE); + coda_write(dev, 48 * 1024, CODA7_CMD_ENC_SEQ_SEARCH_SIZE); + } + } + + if (coda_command_sync(ctx, CODA_COMMAND_SEQ_INIT)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_SEQ_INIT timeout\n"); + return -ETIMEDOUT; + } + + if (coda_read(dev, CODA_RET_ENC_SEQ_SUCCESS) == 0) + return -EFAULT; + + ret = coda_alloc_framebuffers(ctx, q_data_src, dst_fourcc); + if (ret < 0) + return ret; + + coda_write(dev, ctx->num_internal_frames, CODA_CMD_SET_FRAME_BUF_NUM); + coda_write(dev, round_up(q_data_src->width, 8), CODA_CMD_SET_FRAME_BUF_STRIDE); + if (dev->devtype->product != CODA_DX6) { + coda_write(dev, round_up(q_data_src->width, 8), CODA7_CMD_SET_FRAME_SOURCE_BUF_STRIDE); + coda_write(dev, dev->iram_paddr + 48 * 1024, CODA7_CMD_SET_FRAME_AXI_DBKY_ADDR); + coda_write(dev, dev->iram_paddr + 53 * 1024, CODA7_CMD_SET_FRAME_AXI_DBKC_ADDR); + coda_write(dev, dev->iram_paddr + 58 * 1024, CODA7_CMD_SET_FRAME_AXI_BIT_ADDR); + coda_write(dev, dev->iram_paddr + 68 * 1024, CODA7_CMD_SET_FRAME_AXI_IPACDC_ADDR); + coda_write(dev, 0x0, CODA7_CMD_SET_FRAME_AXI_OVL_ADDR); + } + if (coda_command_sync(ctx, CODA_COMMAND_SET_FRAME_BUF)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_SET_FRAME_BUF timeout\n"); + return -ETIMEDOUT; + } + + /* Save stream headers */ + buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + switch (dst_fourcc) { + case V4L2_PIX_FMT_H264: + /* + * Get SPS in the first frame and copy it to an + * intermediate buffer. + */ + coda_write(dev, vb2_dma_contig_plane_dma_addr(buf, 0), CODA_CMD_ENC_HEADER_BB_START); + coda_write(dev, bitstream_size, CODA_CMD_ENC_HEADER_BB_SIZE); + coda_write(dev, CODA_HEADER_H264_SPS, CODA_CMD_ENC_HEADER_CODE); + if (coda_command_sync(ctx, CODA_COMMAND_ENCODE_HEADER)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_ENCODE_HEADER timeout\n"); + return -ETIMEDOUT; + } + ctx->vpu_header_size[0] = coda_read(dev, CODA_REG_BIT_WR_PTR(ctx->idx)) - + coda_read(dev, CODA_CMD_ENC_HEADER_BB_START); + memcpy(&ctx->vpu_header[0][0], vb2_plane_vaddr(buf, 0), + ctx->vpu_header_size[0]); + + /* + * Get PPS in the first frame and copy it to an + * intermediate buffer. + */ + coda_write(dev, vb2_dma_contig_plane_dma_addr(buf, 0), CODA_CMD_ENC_HEADER_BB_START); + coda_write(dev, bitstream_size, CODA_CMD_ENC_HEADER_BB_SIZE); + coda_write(dev, CODA_HEADER_H264_PPS, CODA_CMD_ENC_HEADER_CODE); + if (coda_command_sync(ctx, CODA_COMMAND_ENCODE_HEADER)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_ENCODE_HEADER timeout\n"); + return -ETIMEDOUT; + } + ctx->vpu_header_size[1] = coda_read(dev, CODA_REG_BIT_WR_PTR(ctx->idx)) - + coda_read(dev, CODA_CMD_ENC_HEADER_BB_START); + memcpy(&ctx->vpu_header[1][0], vb2_plane_vaddr(buf, 0), + ctx->vpu_header_size[1]); + ctx->vpu_header_size[2] = 0; + break; + case V4L2_PIX_FMT_MPEG4: + /* + * Get VOS in the first frame and copy it to an + * intermediate buffer + */ + coda_write(dev, vb2_dma_contig_plane_dma_addr(buf, 0), CODA_CMD_ENC_HEADER_BB_START); + coda_write(dev, bitstream_size, CODA_CMD_ENC_HEADER_BB_SIZE); + coda_write(dev, CODA_HEADER_MP4V_VOS, CODA_CMD_ENC_HEADER_CODE); + if (coda_command_sync(ctx, CODA_COMMAND_ENCODE_HEADER)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_ENCODE_HEADER timeout\n"); + return -ETIMEDOUT; + } + ctx->vpu_header_size[0] = coda_read(dev, CODA_REG_BIT_WR_PTR(ctx->idx)) - + coda_read(dev, CODA_CMD_ENC_HEADER_BB_START); + memcpy(&ctx->vpu_header[0][0], vb2_plane_vaddr(buf, 0), + ctx->vpu_header_size[0]); + + coda_write(dev, vb2_dma_contig_plane_dma_addr(buf, 0), CODA_CMD_ENC_HEADER_BB_START); + coda_write(dev, bitstream_size, CODA_CMD_ENC_HEADER_BB_SIZE); + coda_write(dev, CODA_HEADER_MP4V_VIS, CODA_CMD_ENC_HEADER_CODE); + if (coda_command_sync(ctx, CODA_COMMAND_ENCODE_HEADER)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_ENCODE_HEADER failed\n"); + return -ETIMEDOUT; + } + ctx->vpu_header_size[1] = coda_read(dev, CODA_REG_BIT_WR_PTR(ctx->idx)) - + coda_read(dev, CODA_CMD_ENC_HEADER_BB_START); + memcpy(&ctx->vpu_header[1][0], vb2_plane_vaddr(buf, 0), + ctx->vpu_header_size[1]); + + coda_write(dev, vb2_dma_contig_plane_dma_addr(buf, 0), CODA_CMD_ENC_HEADER_BB_START); + coda_write(dev, bitstream_size, CODA_CMD_ENC_HEADER_BB_SIZE); + coda_write(dev, CODA_HEADER_MP4V_VOL, CODA_CMD_ENC_HEADER_CODE); + if (coda_command_sync(ctx, CODA_COMMAND_ENCODE_HEADER)) { + v4l2_err(v4l2_dev, "CODA_COMMAND_ENCODE_HEADER failed\n"); + return -ETIMEDOUT; + } + ctx->vpu_header_size[2] = coda_read(dev, CODA_REG_BIT_WR_PTR(ctx->idx)) - + coda_read(dev, CODA_CMD_ENC_HEADER_BB_START); + memcpy(&ctx->vpu_header[2][0], vb2_plane_vaddr(buf, 0), + ctx->vpu_header_size[2]); + break; + default: + /* No more formats need to save headers at the moment */ + break; + } + + return 0; +} + +static int coda_stop_streaming(struct vb2_queue *q) +{ + struct coda_ctx *ctx = vb2_get_drv_priv(q); + struct coda_dev *dev = ctx->dev; + + if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "%s: output\n", __func__); + ctx->rawstreamon = 0; + } else { + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "%s: capture\n", __func__); + ctx->compstreamon = 0; + } + + /* Don't stop the coda unless both queues are off */ + if (ctx->rawstreamon || ctx->compstreamon) + return 0; + + if (coda_isbusy(dev)) { + if (wait_for_completion_interruptible_timeout(&dev->done, HZ) <= 0) { + v4l2_warn(&dev->v4l2_dev, + "%s: timeout, sending SEQ_END anyway\n", __func__); + } + } + + cancel_delayed_work(&dev->timeout); + + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, + "%s: sent command 'SEQ_END' to coda\n", __func__); + if (coda_command_sync(ctx, CODA_COMMAND_SEQ_END)) { + v4l2_err(&dev->v4l2_dev, + "CODA_COMMAND_SEQ_END failed\n"); + return -ETIMEDOUT; + } + + coda_free_framebuffers(ctx); + + return 0; +} + +static struct vb2_ops coda_qops = { + .queue_setup = coda_queue_setup, + .buf_prepare = coda_buf_prepare, + .buf_queue = coda_buf_queue, + .wait_prepare = coda_wait_prepare, + .wait_finish = coda_wait_finish, + .start_streaming = coda_start_streaming, + .stop_streaming = coda_stop_streaming, +}; + +static int coda_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct coda_ctx *ctx = + container_of(ctrl->handler, struct coda_ctx, ctrls); + + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "s_ctrl: id = %d, val = %d\n", ctrl->id, ctrl->val); + + switch (ctrl->id) { + case V4L2_CID_HFLIP: + if (ctrl->val) + ctx->params.rot_mode |= CODA_MIR_HOR; + else + ctx->params.rot_mode &= ~CODA_MIR_HOR; + break; + case V4L2_CID_VFLIP: + if (ctrl->val) + ctx->params.rot_mode |= CODA_MIR_VER; + else + ctx->params.rot_mode &= ~CODA_MIR_VER; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE: + ctx->params.bitrate = ctrl->val / 1000; + break; + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + ctx->params.gop_size = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP: + ctx->params.h264_intra_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP: + ctx->params.h264_inter_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP: + ctx->params.mpeg4_intra_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP: + ctx->params.mpeg4_inter_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE: + ctx->params.slice_mode = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB: + ctx->params.slice_max_mb = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES: + ctx->params.slice_max_bits = ctrl->val * 8; + break; + case V4L2_CID_MPEG_VIDEO_HEADER_MODE: + break; + default: + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "Invalid control, id=%d, val=%d\n", + ctrl->id, ctrl->val); + return -EINVAL; + } + + return 0; +} + +static struct v4l2_ctrl_ops coda_ctrl_ops = { + .s_ctrl = coda_s_ctrl, +}; + +static int coda_ctrls_setup(struct coda_ctx *ctx) +{ + v4l2_ctrl_handler_init(&ctx->ctrls, 9); + + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_BITRATE, 0, 32767000, 1, 0); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_GOP_SIZE, 1, 60, 1, 16); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP, 1, 51, 1, 25); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP, 1, 51, 1, 25); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP, 1, 31, 1, 2); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP, 1, 31, 1, 2); + v4l2_ctrl_new_std_menu(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE, + V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES, 0x0, + V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB, 1, 0x3fffffff, 1, 1); + v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES, 1, 0x3fffffff, 1, 500); + v4l2_ctrl_new_std_menu(&ctx->ctrls, &coda_ctrl_ops, + V4L2_CID_MPEG_VIDEO_HEADER_MODE, + V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME, + (1 << V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE), + V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME); + + if (ctx->ctrls.error) { + v4l2_err(&ctx->dev->v4l2_dev, "control initialization error (%d)", + ctx->ctrls.error); + return -EINVAL; + } + + return v4l2_ctrl_handler_setup(&ctx->ctrls); +} + +static int coda_queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct coda_ctx *ctx = priv; + int ret; + + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + src_vq->io_modes = VB2_MMAP | VB2_USERPTR; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + src_vq->ops = &coda_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->ops = &coda_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + + return vb2_queue_init(dst_vq); +} + +static int coda_next_free_instance(struct coda_dev *dev) +{ + return ffz(dev->instance_mask); +} + +static int coda_open(struct file *file) +{ + struct coda_dev *dev = video_drvdata(file); + struct coda_ctx *ctx = NULL; + int ret = 0; + int idx; + + idx = coda_next_free_instance(dev); + if (idx >= CODA_MAX_INSTANCES) + return -EBUSY; + set_bit(idx, &dev->instance_mask); + + ctx = kzalloc(sizeof *ctx, GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + v4l2_fh_init(&ctx->fh, video_devdata(file)); + file->private_data = &ctx->fh; + v4l2_fh_add(&ctx->fh); + ctx->dev = dev; + ctx->idx = idx; + + set_default_params(ctx); + ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, + &coda_queue_init); + if (IS_ERR(ctx->m2m_ctx)) { + int ret = PTR_ERR(ctx->m2m_ctx); + + v4l2_err(&dev->v4l2_dev, "%s return error (%d)\n", + __func__, ret); + goto err; + } + ret = coda_ctrls_setup(ctx); + if (ret) { + v4l2_err(&dev->v4l2_dev, "failed to setup coda controls\n"); + goto err; + } + + ctx->fh.ctrl_handler = &ctx->ctrls; + + ctx->parabuf.vaddr = dma_alloc_coherent(&dev->plat_dev->dev, + CODA_PARA_BUF_SIZE, &ctx->parabuf.paddr, GFP_KERNEL); + if (!ctx->parabuf.vaddr) { + v4l2_err(&dev->v4l2_dev, "failed to allocate parabuf"); + ret = -ENOMEM; + goto err; + } + + coda_lock(ctx); + list_add(&ctx->list, &dev->instances); + coda_unlock(ctx); + + clk_prepare_enable(dev->clk_per); + clk_prepare_enable(dev->clk_ahb); + + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, "Created instance %d (%p)\n", + ctx->idx, ctx); + + return 0; + +err: + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); + return ret; +} + +static int coda_release(struct file *file) +{ + struct coda_dev *dev = video_drvdata(file); + struct coda_ctx *ctx = fh_to_ctx(file->private_data); + + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, "Releasing instance %p\n", + ctx); + + coda_lock(ctx); + list_del(&ctx->list); + coda_unlock(ctx); + + dma_free_coherent(&dev->plat_dev->dev, CODA_PARA_BUF_SIZE, + ctx->parabuf.vaddr, ctx->parabuf.paddr); + v4l2_m2m_ctx_release(ctx->m2m_ctx); + v4l2_ctrl_handler_free(&ctx->ctrls); + clk_disable_unprepare(dev->clk_per); + clk_disable_unprepare(dev->clk_ahb); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + clear_bit(ctx->idx, &dev->instance_mask); + kfree(ctx); + + return 0; +} + +static unsigned int coda_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct coda_ctx *ctx = fh_to_ctx(file->private_data); + int ret; + + coda_lock(ctx); + ret = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + coda_unlock(ctx); + return ret; +} + +static int coda_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct coda_ctx *ctx = fh_to_ctx(file->private_data); + + return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); +} + +static const struct v4l2_file_operations coda_fops = { + .owner = THIS_MODULE, + .open = coda_open, + .release = coda_release, + .poll = coda_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = coda_mmap, +}; + +static irqreturn_t coda_irq_handler(int irq, void *data) +{ + struct vb2_buffer *src_buf, *dst_buf; + struct coda_dev *dev = data; + u32 wr_ptr, start_ptr; + struct coda_ctx *ctx; + + __cancel_delayed_work(&dev->timeout); + + /* read status register to attend the IRQ */ + coda_read(dev, CODA_REG_BIT_INT_STATUS); + coda_write(dev, CODA_REG_BIT_INT_CLEAR_SET, + CODA_REG_BIT_INT_CLEAR); + + ctx = v4l2_m2m_get_curr_priv(dev->m2m_dev); + if (ctx == NULL) { + v4l2_err(&dev->v4l2_dev, "Instance released before the end of transaction\n"); + return IRQ_HANDLED; + } + + if (ctx->aborting) { + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "task has been aborted\n"); + return IRQ_HANDLED; + } + + if (coda_isbusy(ctx->dev)) { + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, + "coda is still busy!!!!\n"); + return IRQ_NONE; + } + + complete(&dev->done); + + src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); + + /* Get results from the coda */ + coda_read(dev, CODA_RET_ENC_PIC_TYPE); + start_ptr = coda_read(dev, CODA_CMD_ENC_PIC_BB_START); + wr_ptr = coda_read(dev, CODA_REG_BIT_WR_PTR(ctx->idx)); + /* Calculate bytesused field */ + if (dst_buf->v4l2_buf.sequence == 0) { + dst_buf->v4l2_planes[0].bytesused = (wr_ptr - start_ptr) + + ctx->vpu_header_size[0] + + ctx->vpu_header_size[1] + + ctx->vpu_header_size[2]; + } else { + dst_buf->v4l2_planes[0].bytesused = (wr_ptr - start_ptr); + } + + v4l2_dbg(1, coda_debug, &ctx->dev->v4l2_dev, "frame size = %u\n", + wr_ptr - start_ptr); + + coda_read(dev, CODA_RET_ENC_PIC_SLICE_NUM); + coda_read(dev, CODA_RET_ENC_PIC_FLAG); + + if (src_buf->v4l2_buf.flags & V4L2_BUF_FLAG_KEYFRAME) { + dst_buf->v4l2_buf.flags |= V4L2_BUF_FLAG_KEYFRAME; + dst_buf->v4l2_buf.flags &= ~V4L2_BUF_FLAG_PFRAME; + } else { + dst_buf->v4l2_buf.flags |= V4L2_BUF_FLAG_PFRAME; + dst_buf->v4l2_buf.flags &= ~V4L2_BUF_FLAG_KEYFRAME; + } + + v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_DONE); + v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE); + + ctx->gopcounter--; + if (ctx->gopcounter < 0) + ctx->gopcounter = ctx->params.gop_size - 1; + + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, + "job finished: encoding frame (%d) (%s)\n", + dst_buf->v4l2_buf.sequence, + (dst_buf->v4l2_buf.flags & V4L2_BUF_FLAG_KEYFRAME) ? + "KEYFRAME" : "PFRAME"); + + v4l2_m2m_job_finish(ctx->dev->m2m_dev, ctx->m2m_ctx); + + return IRQ_HANDLED; +} + +static void coda_timeout(struct work_struct *work) +{ + struct coda_ctx *ctx; + struct coda_dev *dev = container_of(to_delayed_work(work), + struct coda_dev, timeout); + + if (completion_done(&dev->done)) + return; + + complete(&dev->done); + + v4l2_err(&dev->v4l2_dev, "CODA PIC_RUN timeout, stopping all streams\n"); + + mutex_lock(&dev->dev_mutex); + list_for_each_entry(ctx, &dev->instances, list) { + v4l2_m2m_streamoff(NULL, ctx->m2m_ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + v4l2_m2m_streamoff(NULL, ctx->m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + } + mutex_unlock(&dev->dev_mutex); +} + +static u32 coda_supported_firmwares[] = { + CODA_FIRMWARE_VERNUM(CODA_DX6, 2, 2, 5), + CODA_FIRMWARE_VERNUM(CODA_7541, 13, 4, 29), +}; + +static bool coda_firmware_supported(u32 vernum) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(coda_supported_firmwares); i++) + if (vernum == coda_supported_firmwares[i]) + return true; + return false; +} + +static char *coda_product_name(int product) +{ + static char buf[9]; + + switch (product) { + case CODA_DX6: + return "CodaDx6"; + case CODA_7541: + return "CODA7541"; + default: + snprintf(buf, sizeof(buf), "(0x%04x)", product); + return buf; + } +} + +static int coda_hw_init(struct coda_dev *dev) +{ + u16 product, major, minor, release; + u32 data; + u16 *p; + int i; + + clk_prepare_enable(dev->clk_per); + clk_prepare_enable(dev->clk_ahb); + + /* + * Copy the first CODA_ISRAM_SIZE in the internal SRAM. + * The 16-bit chars in the code buffer are in memory access + * order, re-sort them to CODA order for register download. + * Data in this SRAM survives a reboot. + */ + p = (u16 *)dev->codebuf.vaddr; + if (dev->devtype->product == CODA_DX6) { + for (i = 0; i < (CODA_ISRAM_SIZE / 2); i++) { + data = CODA_DOWN_ADDRESS_SET(i) | + CODA_DOWN_DATA_SET(p[i ^ 1]); + coda_write(dev, data, CODA_REG_BIT_CODE_DOWN); + } + } else { + for (i = 0; i < (CODA_ISRAM_SIZE / 2); i++) { + data = CODA_DOWN_ADDRESS_SET(i) | + CODA_DOWN_DATA_SET(p[round_down(i, 4) + + 3 - (i % 4)]); + coda_write(dev, data, CODA_REG_BIT_CODE_DOWN); + } + } + + /* Tell the BIT where to find everything it needs */ + coda_write(dev, dev->workbuf.paddr, + CODA_REG_BIT_WORK_BUF_ADDR); + coda_write(dev, dev->codebuf.paddr, + CODA_REG_BIT_CODE_BUF_ADDR); + coda_write(dev, 0, CODA_REG_BIT_CODE_RUN); + + /* Set default values */ + switch (dev->devtype->product) { + case CODA_DX6: + coda_write(dev, CODADX6_STREAM_BUF_PIC_FLUSH, CODA_REG_BIT_STREAM_CTRL); + break; + default: + coda_write(dev, CODA7_STREAM_BUF_PIC_FLUSH, CODA_REG_BIT_STREAM_CTRL); + } + coda_write(dev, 0, CODA_REG_BIT_FRAME_MEM_CTRL); + + if (dev->devtype->product != CODA_DX6) + coda_write(dev, 0, CODA7_REG_BIT_AXI_SRAM_USE); + + coda_write(dev, CODA_INT_INTERRUPT_ENABLE, + CODA_REG_BIT_INT_ENABLE); + + /* Reset VPU and start processor */ + data = coda_read(dev, CODA_REG_BIT_CODE_RESET); + data |= CODA_REG_RESET_ENABLE; + coda_write(dev, data, CODA_REG_BIT_CODE_RESET); + udelay(10); + data &= ~CODA_REG_RESET_ENABLE; + coda_write(dev, data, CODA_REG_BIT_CODE_RESET); + coda_write(dev, CODA_REG_RUN_ENABLE, CODA_REG_BIT_CODE_RUN); + + /* Load firmware */ + coda_write(dev, 0, CODA_CMD_FIRMWARE_VERNUM); + coda_write(dev, CODA_REG_BIT_BUSY_FLAG, CODA_REG_BIT_BUSY); + coda_write(dev, 0, CODA_REG_BIT_RUN_INDEX); + coda_write(dev, 0, CODA_REG_BIT_RUN_COD_STD); + coda_write(dev, CODA_COMMAND_FIRMWARE_GET, CODA_REG_BIT_RUN_COMMAND); + if (coda_wait_timeout(dev)) { + clk_disable_unprepare(dev->clk_per); + clk_disable_unprepare(dev->clk_ahb); + v4l2_err(&dev->v4l2_dev, "firmware get command error\n"); + return -EIO; + } + + /* Check we are compatible with the loaded firmware */ + data = coda_read(dev, CODA_CMD_FIRMWARE_VERNUM); + product = CODA_FIRMWARE_PRODUCT(data); + major = CODA_FIRMWARE_MAJOR(data); + minor = CODA_FIRMWARE_MINOR(data); + release = CODA_FIRMWARE_RELEASE(data); + + clk_disable_unprepare(dev->clk_per); + clk_disable_unprepare(dev->clk_ahb); + + if (product != dev->devtype->product) { + v4l2_err(&dev->v4l2_dev, "Wrong firmware. Hw: %s, Fw: %s," + " Version: %u.%u.%u\n", + coda_product_name(dev->devtype->product), + coda_product_name(product), major, minor, release); + return -EINVAL; + } + + v4l2_info(&dev->v4l2_dev, "Initialized %s.\n", + coda_product_name(product)); + + if (coda_firmware_supported(data)) { + v4l2_info(&dev->v4l2_dev, "Firmware version: %u.%u.%u\n", + major, minor, release); + } else { + v4l2_warn(&dev->v4l2_dev, "Unsupported firmware version: " + "%u.%u.%u\n", major, minor, release); + } + + return 0; +} + +static void coda_fw_callback(const struct firmware *fw, void *context) +{ + struct coda_dev *dev = context; + struct platform_device *pdev = dev->plat_dev; + int ret; + + if (!fw) { + v4l2_err(&dev->v4l2_dev, "firmware request failed\n"); + return; + } + + /* allocate auxiliary per-device code buffer for the BIT processor */ + dev->codebuf.size = fw->size; + dev->codebuf.vaddr = dma_alloc_coherent(&pdev->dev, fw->size, + &dev->codebuf.paddr, + GFP_KERNEL); + if (!dev->codebuf.vaddr) { + dev_err(&pdev->dev, "failed to allocate code buffer\n"); + return; + } + + /* Copy the whole firmware image to the code buffer */ + memcpy(dev->codebuf.vaddr, fw->data, fw->size); + release_firmware(fw); + + ret = coda_hw_init(dev); + if (ret) { + v4l2_err(&dev->v4l2_dev, "HW initialization failed\n"); + return; + } + + dev->vfd.fops = &coda_fops, + dev->vfd.ioctl_ops = &coda_ioctl_ops; + dev->vfd.release = video_device_release_empty, + dev->vfd.lock = &dev->dev_mutex; + dev->vfd.v4l2_dev = &dev->v4l2_dev; + dev->vfd.vfl_dir = VFL_DIR_M2M; + snprintf(dev->vfd.name, sizeof(dev->vfd.name), "%s", CODA_NAME); + video_set_drvdata(&dev->vfd, dev); + + dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(dev->alloc_ctx)) { + v4l2_err(&dev->v4l2_dev, "Failed to alloc vb2 context\n"); + return; + } + + dev->m2m_dev = v4l2_m2m_init(&coda_m2m_ops); + if (IS_ERR(dev->m2m_dev)) { + v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem device\n"); + goto rel_ctx; + } + + ret = video_register_device(&dev->vfd, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); + goto rel_m2m; + } + v4l2_info(&dev->v4l2_dev, "codec registered as /dev/video%d\n", + dev->vfd.num); + + return; + +rel_m2m: + v4l2_m2m_release(dev->m2m_dev); +rel_ctx: + vb2_dma_contig_cleanup_ctx(dev->alloc_ctx); +} + +static int coda_firmware_request(struct coda_dev *dev) +{ + char *fw = dev->devtype->firmware; + + dev_dbg(&dev->plat_dev->dev, "requesting firmware '%s' for %s\n", fw, + coda_product_name(dev->devtype->product)); + + return request_firmware_nowait(THIS_MODULE, true, + fw, &dev->plat_dev->dev, GFP_KERNEL, dev, coda_fw_callback); +} + +enum coda_platform { + CODA_IMX27, + CODA_IMX53, +}; + +static const struct coda_devtype coda_devdata[] = { + [CODA_IMX27] = { + .firmware = "v4l-codadx6-imx27.bin", + .product = CODA_DX6, + .formats = codadx6_formats, + .num_formats = ARRAY_SIZE(codadx6_formats), + }, + [CODA_IMX53] = { + .firmware = "v4l-coda7541-imx53.bin", + .product = CODA_7541, + .formats = coda7_formats, + .num_formats = ARRAY_SIZE(coda7_formats), + }, +}; + +static struct platform_device_id coda_platform_ids[] = { + { .name = "coda-imx27", .driver_data = CODA_IMX27 }, + { .name = "coda-imx53", .driver_data = CODA_7541 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, coda_platform_ids); + +#ifdef CONFIG_OF +static const struct of_device_id coda_dt_ids[] = { + { .compatible = "fsl,imx27-vpu", .data = &coda_platform_ids[CODA_IMX27] }, + { .compatible = "fsl,imx53-vpu", .data = &coda_devdata[CODA_IMX53] }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, coda_dt_ids); +#endif + +static int __devinit coda_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(of_match_ptr(coda_dt_ids), &pdev->dev); + const struct platform_device_id *pdev_id; + struct coda_dev *dev; + struct resource *res; + int ret, irq; + + dev = devm_kzalloc(&pdev->dev, sizeof *dev, GFP_KERNEL); + if (!dev) { + dev_err(&pdev->dev, "Not enough memory for %s\n", + CODA_NAME); + return -ENOMEM; + } + + spin_lock_init(&dev->irqlock); + INIT_LIST_HEAD(&dev->instances); + INIT_DELAYED_WORK(&dev->timeout, coda_timeout); + init_completion(&dev->done); + complete(&dev->done); + + dev->plat_dev = pdev; + dev->clk_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(dev->clk_per)) { + dev_err(&pdev->dev, "Could not get per clock\n"); + return PTR_ERR(dev->clk_per); + } + + dev->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(dev->clk_ahb)) { + dev_err(&pdev->dev, "Could not get ahb clock\n"); + return PTR_ERR(dev->clk_ahb); + } + + /* Get memory for physical registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "failed to get memory region resource\n"); + return -ENOENT; + } + + if (devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), CODA_NAME) == NULL) { + dev_err(&pdev->dev, "failed to request memory region\n"); + return -ENOENT; + } + dev->regs_base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!dev->regs_base) { + dev_err(&pdev->dev, "failed to ioremap address region\n"); + return -ENOENT; + } + + /* IRQ */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get irq resource\n"); + return -ENOENT; + } + + if (devm_request_irq(&pdev->dev, irq, coda_irq_handler, + 0, CODA_NAME, dev) < 0) { + dev_err(&pdev->dev, "failed to request irq\n"); + return -ENOENT; + } + + ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); + if (ret) + return ret; + + mutex_init(&dev->dev_mutex); + + pdev_id = of_id ? of_id->data : platform_get_device_id(pdev); + + if (of_id) { + dev->devtype = of_id->data; + } else if (pdev_id) { + dev->devtype = &coda_devdata[pdev_id->driver_data]; + } else { + v4l2_device_unregister(&dev->v4l2_dev); + return -EINVAL; + } + + /* allocate auxiliary per-device buffers for the BIT processor */ + switch (dev->devtype->product) { + case CODA_DX6: + dev->workbuf.size = CODADX6_WORK_BUF_SIZE; + break; + default: + dev->workbuf.size = CODA7_WORK_BUF_SIZE; + } + dev->workbuf.vaddr = dma_alloc_coherent(&pdev->dev, dev->workbuf.size, + &dev->workbuf.paddr, + GFP_KERNEL); + if (!dev->workbuf.vaddr) { + dev_err(&pdev->dev, "failed to allocate work buffer\n"); + v4l2_device_unregister(&dev->v4l2_dev); + return -ENOMEM; + } + + if (dev->devtype->product == CODA_DX6) { + dev->iram_paddr = 0xffff4c00; + } else { + void __iomem *iram_vaddr; + + iram_vaddr = iram_alloc(CODA7_IRAM_SIZE, + &dev->iram_paddr); + if (!iram_vaddr) { + dev_err(&pdev->dev, "unable to alloc iram\n"); + return -ENOMEM; + } + } + + platform_set_drvdata(pdev, dev); + + return coda_firmware_request(dev); +} + +static int coda_remove(struct platform_device *pdev) +{ + struct coda_dev *dev = platform_get_drvdata(pdev); + + video_unregister_device(&dev->vfd); + if (dev->m2m_dev) + v4l2_m2m_release(dev->m2m_dev); + if (dev->alloc_ctx) + vb2_dma_contig_cleanup_ctx(dev->alloc_ctx); + v4l2_device_unregister(&dev->v4l2_dev); + if (dev->iram_paddr) + iram_free(dev->iram_paddr, CODA7_IRAM_SIZE); + if (dev->codebuf.vaddr) + dma_free_coherent(&pdev->dev, dev->codebuf.size, + &dev->codebuf.vaddr, dev->codebuf.paddr); + if (dev->workbuf.vaddr) + dma_free_coherent(&pdev->dev, dev->workbuf.size, &dev->workbuf.vaddr, + dev->workbuf.paddr); + return 0; +} + +static struct platform_driver coda_driver = { + .probe = coda_probe, + .remove = __devexit_p(coda_remove), + .driver = { + .name = CODA_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(coda_dt_ids), + }, + .id_table = coda_platform_ids, +}; + +module_platform_driver(coda_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Javier Martin "); +MODULE_DESCRIPTION("Coda multi-standard codec V4L2 driver"); diff --git a/drivers/media/platform/coda.h b/drivers/media/platform/coda.h new file mode 100644 index 0000000000000000000000000000000000000000..f3f5e43c1ac23b2ac056ab598910c745d19320e5 --- /dev/null +++ b/drivers/media/platform/coda.h @@ -0,0 +1,238 @@ +/* + * linux/drivers/media/platform/coda/coda_regs.h + * + * Copyright (C) 2012 Vista Silicon SL + * Javier Martin + * Xavier Duret + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _REGS_CODA_H_ +#define _REGS_CODA_H_ + +/* HW registers */ +#define CODA_REG_BIT_CODE_RUN 0x000 +#define CODA_REG_RUN_ENABLE (1 << 0) +#define CODA_REG_BIT_CODE_DOWN 0x004 +#define CODA_DOWN_ADDRESS_SET(x) (((x) & 0xffff) << 16) +#define CODA_DOWN_DATA_SET(x) ((x) & 0xffff) +#define CODA_REG_BIT_HOST_IN_REQ 0x008 +#define CODA_REG_BIT_INT_CLEAR 0x00c +#define CODA_REG_BIT_INT_CLEAR_SET 0x1 +#define CODA_REG_BIT_INT_STATUS 0x010 +#define CODA_REG_BIT_CODE_RESET 0x014 +#define CODA_REG_RESET_ENABLE (1 << 0) +#define CODA_REG_BIT_CUR_PC 0x018 + +/* Static SW registers */ +#define CODA_REG_BIT_CODE_BUF_ADDR 0x100 +#define CODA_REG_BIT_WORK_BUF_ADDR 0x104 +#define CODA_REG_BIT_PARA_BUF_ADDR 0x108 +#define CODA_REG_BIT_STREAM_CTRL 0x10c +#define CODA7_STREAM_BUF_PIC_RESET (1 << 4) +#define CODADX6_STREAM_BUF_PIC_RESET (1 << 3) +#define CODA7_STREAM_BUF_PIC_FLUSH (1 << 3) +#define CODADX6_STREAM_BUF_PIC_FLUSH (1 << 2) +#define CODA7_STREAM_BUF_DYNALLOC_EN (1 << 5) +#define CODADX6_STREAM_BUF_DYNALLOC_EN (1 << 4) +#define CODA_STREAM_CHKDIS_OFFSET (1 << 1) +#define CODA_STREAM_ENDIAN_SELECT (1 << 0) +#define CODA_REG_BIT_FRAME_MEM_CTRL 0x110 +#define CODA_IMAGE_ENDIAN_SELECT (1 << 0) +#define CODA_REG_BIT_RD_PTR(x) (0x120 + 8 * (x)) +#define CODA_REG_BIT_WR_PTR(x) (0x124 + 8 * (x)) +#define CODADX6_REG_BIT_SEARCH_RAM_BASE_ADDR 0x140 +#define CODA7_REG_BIT_AXI_SRAM_USE 0x140 +#define CODA7_USE_BIT_ENABLE (1 << 0) +#define CODA7_USE_HOST_BIT_ENABLE (1 << 7) +#define CODA7_USE_ME_ENABLE (1 << 4) +#define CODA7_USE_HOST_ME_ENABLE (1 << 11) +#define CODA_REG_BIT_BUSY 0x160 +#define CODA_REG_BIT_BUSY_FLAG 1 +#define CODA_REG_BIT_RUN_COMMAND 0x164 +#define CODA_COMMAND_SEQ_INIT 1 +#define CODA_COMMAND_SEQ_END 2 +#define CODA_COMMAND_PIC_RUN 3 +#define CODA_COMMAND_SET_FRAME_BUF 4 +#define CODA_COMMAND_ENCODE_HEADER 5 +#define CODA_COMMAND_ENC_PARA_SET 6 +#define CODA_COMMAND_DEC_PARA_SET 7 +#define CODA_COMMAND_DEC_BUF_FLUSH 8 +#define CODA_COMMAND_RC_CHANGE_PARAMETER 9 +#define CODA_COMMAND_FIRMWARE_GET 0xf +#define CODA_REG_BIT_RUN_INDEX 0x168 +#define CODA_INDEX_SET(x) ((x) & 0x3) +#define CODA_REG_BIT_RUN_COD_STD 0x16c +#define CODADX6_MODE_DECODE_MP4 0 +#define CODADX6_MODE_ENCODE_MP4 1 +#define CODADX6_MODE_DECODE_H264 2 +#define CODADX6_MODE_ENCODE_H264 3 +#define CODA7_MODE_DECODE_H264 0 +#define CODA7_MODE_DECODE_VC1 1 +#define CODA7_MODE_DECODE_MP2 2 +#define CODA7_MODE_DECODE_MP4 3 +#define CODA7_MODE_DECODE_DV3 3 +#define CODA7_MODE_DECODE_RV 4 +#define CODA7_MODE_DECODE_MJPG 5 +#define CODA7_MODE_ENCODE_H264 8 +#define CODA7_MODE_ENCODE_MP4 11 +#define CODA7_MODE_ENCODE_MJPG 13 +#define CODA_MODE_INVALID 0xffff +#define CODA_REG_BIT_INT_ENABLE 0x170 +#define CODA_INT_INTERRUPT_ENABLE (1 << 3) + +/* + * Commands' mailbox: + * registers with offsets in the range 0x180-0x1d0 + * have different meaning depending on the command being + * issued. + */ + +/* Encoder Sequence Initialization */ +#define CODA_CMD_ENC_SEQ_BB_START 0x180 +#define CODA_CMD_ENC_SEQ_BB_SIZE 0x184 +#define CODA_CMD_ENC_SEQ_OPTION 0x188 +#define CODA_OPTION_GAMMA_OFFSET 7 +#define CODA_OPTION_GAMMA_MASK 0x01 +#define CODA_OPTION_LIMITQP_OFFSET 6 +#define CODA_OPTION_LIMITQP_MASK 0x01 +#define CODA_OPTION_RCINTRAQP_OFFSET 5 +#define CODA_OPTION_RCINTRAQP_MASK 0x01 +#define CODA_OPTION_FMO_OFFSET 4 +#define CODA_OPTION_FMO_MASK 0x01 +#define CODA_OPTION_SLICEREPORT_OFFSET 1 +#define CODA_OPTION_SLICEREPORT_MASK 0x01 +#define CODA_CMD_ENC_SEQ_COD_STD 0x18c +#define CODA_STD_MPEG4 0 +#define CODA_STD_H263 1 +#define CODA_STD_H264 2 +#define CODA_STD_MJPG 3 +#define CODA_CMD_ENC_SEQ_SRC_SIZE 0x190 +#define CODA7_PICWIDTH_OFFSET 16 +#define CODA7_PICWIDTH_MASK 0xffff +#define CODADX6_PICWIDTH_OFFSET 10 +#define CODADX6_PICWIDTH_MASK 0x3ff +#define CODA_PICHEIGHT_OFFSET 0 +#define CODA_PICHEIGHT_MASK 0x3ff +#define CODA_CMD_ENC_SEQ_SRC_F_RATE 0x194 +#define CODA_CMD_ENC_SEQ_MP4_PARA 0x198 +#define CODA_MP4PARAM_VERID_OFFSET 6 +#define CODA_MP4PARAM_VERID_MASK 0x01 +#define CODA_MP4PARAM_INTRADCVLCTHR_OFFSET 2 +#define CODA_MP4PARAM_INTRADCVLCTHR_MASK 0x07 +#define CODA_MP4PARAM_REVERSIBLEVLCENABLE_OFFSET 1 +#define CODA_MP4PARAM_REVERSIBLEVLCENABLE_MASK 0x01 +#define CODA_MP4PARAM_DATAPARTITIONENABLE_OFFSET 0 +#define CODA_MP4PARAM_DATAPARTITIONENABLE_MASK 0x01 +#define CODA_CMD_ENC_SEQ_263_PARA 0x19c +#define CODA_263PARAM_ANNEXJENABLE_OFFSET 2 +#define CODA_263PARAM_ANNEXJENABLE_MASK 0x01 +#define CODA_263PARAM_ANNEXKENABLE_OFFSET 1 +#define CODA_263PARAM_ANNEXKENABLE_MASK 0x01 +#define CODA_263PARAM_ANNEXTENABLE_OFFSET 0 +#define CODA_263PARAM_ANNEXTENABLE_MASK 0x01 +#define CODA_CMD_ENC_SEQ_264_PARA 0x1a0 +#define CODA_264PARAM_DEBLKFILTEROFFSETBETA_OFFSET 12 +#define CODA_264PARAM_DEBLKFILTEROFFSETBETA_MASK 0x0f +#define CODA_264PARAM_DEBLKFILTEROFFSETALPHA_OFFSET 8 +#define CODA_264PARAM_DEBLKFILTEROFFSETALPHA_MASK 0x0f +#define CODA_264PARAM_DISABLEDEBLK_OFFSET 6 +#define CODA_264PARAM_DISABLEDEBLK_MASK 0x01 +#define CODA_264PARAM_CONSTRAINEDINTRAPREDFLAG_OFFSET 5 +#define CODA_264PARAM_CONSTRAINEDINTRAPREDFLAG_MASK 0x01 +#define CODA_264PARAM_CHROMAQPOFFSET_OFFSET 0 +#define CODA_264PARAM_CHROMAQPOFFSET_MASK 0x1f +#define CODA_CMD_ENC_SEQ_SLICE_MODE 0x1a4 +#define CODA_SLICING_SIZE_OFFSET 2 +#define CODA_SLICING_SIZE_MASK 0x3fffffff +#define CODA_SLICING_UNIT_OFFSET 1 +#define CODA_SLICING_UNIT_MASK 0x01 +#define CODA_SLICING_MODE_OFFSET 0 +#define CODA_SLICING_MODE_MASK 0x01 +#define CODA_CMD_ENC_SEQ_GOP_SIZE 0x1a8 +#define CODA_GOP_SIZE_OFFSET 0 +#define CODA_GOP_SIZE_MASK 0x3f +#define CODA_CMD_ENC_SEQ_RC_PARA 0x1ac +#define CODA_RATECONTROL_AUTOSKIP_OFFSET 31 +#define CODA_RATECONTROL_AUTOSKIP_MASK 0x01 +#define CODA_RATECONTROL_INITIALDELAY_OFFSET 16 +#define CODA_RATECONTROL_INITIALDELAY_MASK 0x7f +#define CODA_RATECONTROL_BITRATE_OFFSET 1 +#define CODA_RATECONTROL_BITRATE_MASK 0x7f +#define CODA_RATECONTROL_ENABLE_OFFSET 0 +#define CODA_RATECONTROL_ENABLE_MASK 0x01 +#define CODA_CMD_ENC_SEQ_RC_BUF_SIZE 0x1b0 +#define CODA_CMD_ENC_SEQ_INTRA_REFRESH 0x1b4 +#define CODADX6_CMD_ENC_SEQ_FMO 0x1b8 +#define CODA_FMOPARAM_TYPE_OFFSET 4 +#define CODA_FMOPARAM_TYPE_MASK 1 +#define CODA_FMOPARAM_SLICENUM_OFFSET 0 +#define CODA_FMOPARAM_SLICENUM_MASK 0x0f +#define CODA7_CMD_ENC_SEQ_SEARCH_BASE 0x1b8 +#define CODA7_CMD_ENC_SEQ_SEARCH_SIZE 0x1bc +#define CODA_CMD_ENC_SEQ_RC_QP_MAX 0x1c8 +#define CODA_QPMAX_OFFSET 0 +#define CODA_QPMAX_MASK 0x3f +#define CODA_CMD_ENC_SEQ_RC_GAMMA 0x1cc +#define CODA_GAMMA_OFFSET 0 +#define CODA_GAMMA_MASK 0xffff +#define CODA_RET_ENC_SEQ_SUCCESS 0x1c0 + +/* Encoder Picture Run */ +#define CODA_CMD_ENC_PIC_SRC_ADDR_Y 0x180 +#define CODA_CMD_ENC_PIC_SRC_ADDR_CB 0x184 +#define CODA_CMD_ENC_PIC_SRC_ADDR_CR 0x188 +#define CODA_CMD_ENC_PIC_QS 0x18c +#define CODA_CMD_ENC_PIC_ROT_MODE 0x190 +#define CODA_ROT_MIR_ENABLE (1 << 4) +#define CODA_ROT_0 (0x0 << 0) +#define CODA_ROT_90 (0x1 << 0) +#define CODA_ROT_180 (0x2 << 0) +#define CODA_ROT_270 (0x3 << 0) +#define CODA_MIR_NONE (0x0 << 2) +#define CODA_MIR_VER (0x1 << 2) +#define CODA_MIR_HOR (0x2 << 2) +#define CODA_MIR_VER_HOR (0x3 << 2) +#define CODA_CMD_ENC_PIC_OPTION 0x194 +#define CODA_CMD_ENC_PIC_BB_START 0x198 +#define CODA_CMD_ENC_PIC_BB_SIZE 0x19c +#define CODA_RET_ENC_PIC_TYPE 0x1c4 +#define CODA_RET_ENC_PIC_SLICE_NUM 0x1cc +#define CODA_RET_ENC_PIC_FLAG 0x1d0 + +/* Set Frame Buffer */ +#define CODA_CMD_SET_FRAME_BUF_NUM 0x180 +#define CODA_CMD_SET_FRAME_BUF_STRIDE 0x184 +#define CODA7_CMD_SET_FRAME_AXI_BIT_ADDR 0x190 +#define CODA7_CMD_SET_FRAME_AXI_IPACDC_ADDR 0x194 +#define CODA7_CMD_SET_FRAME_AXI_DBKY_ADDR 0x198 +#define CODA7_CMD_SET_FRAME_AXI_DBKC_ADDR 0x19c +#define CODA7_CMD_SET_FRAME_AXI_OVL_ADDR 0x1a0 +#define CODA7_CMD_SET_FRAME_SOURCE_BUF_STRIDE 0x1a8 + +/* Encoder Header */ +#define CODA_CMD_ENC_HEADER_CODE 0x180 +#define CODA_GAMMA_OFFSET 0 +#define CODA_HEADER_H264_SPS 0 +#define CODA_HEADER_H264_PPS 1 +#define CODA_HEADER_MP4V_VOL 0 +#define CODA_HEADER_MP4V_VOS 1 +#define CODA_HEADER_MP4V_VIS 2 +#define CODA_CMD_ENC_HEADER_BB_START 0x184 +#define CODA_CMD_ENC_HEADER_BB_SIZE 0x188 + +/* Get Version */ +#define CODA_CMD_FIRMWARE_VERNUM 0x1c0 +#define CODA_FIRMWARE_PRODUCT(x) (((x) >> 16) & 0xffff) +#define CODA_FIRMWARE_MAJOR(x) (((x) >> 12) & 0x0f) +#define CODA_FIRMWARE_MINOR(x) (((x) >> 8) & 0x0f) +#define CODA_FIRMWARE_RELEASE(x) ((x) & 0xff) +#define CODA_FIRMWARE_VERNUM(product, major, minor, release) \ + ((product) << 16 | ((major) << 12) | \ + ((minor) << 8) | (release)) + +#endif diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/platform/davinci/Kconfig similarity index 97% rename from drivers/media/video/davinci/Kconfig rename to drivers/media/platform/davinci/Kconfig index 52c5ca68cb3d38941acd97c1e00c7ae5f3048ba2..78e26d24f63754b857d923c727c628b3ee9e5596 100644 --- a/drivers/media/video/davinci/Kconfig +++ b/drivers/media/platform/davinci/Kconfig @@ -3,8 +3,8 @@ config VIDEO_DAVINCI_VPIF_DISPLAY depends on VIDEO_DEV && (MACH_DAVINCI_DM6467_EVM || MACH_DAVINCI_DA850_EVM) select VIDEOBUF2_DMA_CONTIG select VIDEO_DAVINCI_VPIF - select VIDEO_ADV7343 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_THS7303 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_ADV7343 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_THS7303 if MEDIA_SUBDRV_AUTOSELECT help Enables Davinci VPIF module used for display devices. This module is common for following DM6467/DA850/OMAPL138 diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/platform/davinci/Makefile similarity index 100% rename from drivers/media/video/davinci/Makefile rename to drivers/media/platform/davinci/Makefile diff --git a/drivers/media/video/davinci/ccdc_hw_device.h b/drivers/media/platform/davinci/ccdc_hw_device.h similarity index 100% rename from drivers/media/video/davinci/ccdc_hw_device.h rename to drivers/media/platform/davinci/ccdc_hw_device.h diff --git a/drivers/media/video/davinci/dm355_ccdc.c b/drivers/media/platform/davinci/dm355_ccdc.c similarity index 99% rename from drivers/media/video/davinci/dm355_ccdc.c rename to drivers/media/platform/davinci/dm355_ccdc.c index 5b68847d40179fb43b988d7fe73966919158c1a7..ce0e4131c0672ba882c6a45b819ed7dfe2b960ae 100644 --- a/drivers/media/video/davinci/dm355_ccdc.c +++ b/drivers/media/platform/davinci/dm355_ccdc.c @@ -965,7 +965,7 @@ static struct ccdc_hw_device ccdc_hw_dev = { }, }; -static int __init dm355_ccdc_probe(struct platform_device *pdev) +static int __devinit dm355_ccdc_probe(struct platform_device *pdev) { void (*setup_pinmux)(void); struct resource *res; diff --git a/drivers/media/video/davinci/dm355_ccdc_regs.h b/drivers/media/platform/davinci/dm355_ccdc_regs.h similarity index 100% rename from drivers/media/video/davinci/dm355_ccdc_regs.h rename to drivers/media/platform/davinci/dm355_ccdc_regs.h diff --git a/drivers/media/video/davinci/dm644x_ccdc.c b/drivers/media/platform/davinci/dm644x_ccdc.c similarity index 99% rename from drivers/media/video/davinci/dm644x_ccdc.c rename to drivers/media/platform/davinci/dm644x_ccdc.c index 9303fe553b075899e09e529173373de77af5a871..ee7942b1996ed2fdb11f201891178d29c10317f3 100644 --- a/drivers/media/video/davinci/dm644x_ccdc.c +++ b/drivers/media/platform/davinci/dm644x_ccdc.c @@ -957,7 +957,7 @@ static struct ccdc_hw_device ccdc_hw_dev = { }, }; -static int __init dm644x_ccdc_probe(struct platform_device *pdev) +static int __devinit dm644x_ccdc_probe(struct platform_device *pdev) { struct resource *res; int status = 0; diff --git a/drivers/media/video/davinci/dm644x_ccdc_regs.h b/drivers/media/platform/davinci/dm644x_ccdc_regs.h similarity index 100% rename from drivers/media/video/davinci/dm644x_ccdc_regs.h rename to drivers/media/platform/davinci/dm644x_ccdc_regs.h diff --git a/drivers/media/video/davinci/isif.c b/drivers/media/platform/davinci/isif.c similarity index 99% rename from drivers/media/video/davinci/isif.c rename to drivers/media/platform/davinci/isif.c index 5278fe7d6d0c3638cd1eba5d6860fb0f94066361..b99d5423e3a8dc16d115c244e6e391f870924c79 100644 --- a/drivers/media/video/davinci/isif.c +++ b/drivers/media/platform/davinci/isif.c @@ -1032,7 +1032,7 @@ static struct ccdc_hw_device isif_hw_dev = { }, }; -static int __init isif_probe(struct platform_device *pdev) +static int __devinit isif_probe(struct platform_device *pdev) { void (*setup_pinmux)(void); struct resource *res; diff --git a/drivers/media/video/davinci/isif_regs.h b/drivers/media/platform/davinci/isif_regs.h similarity index 100% rename from drivers/media/video/davinci/isif_regs.h rename to drivers/media/platform/davinci/isif_regs.h diff --git a/drivers/media/video/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c similarity index 100% rename from drivers/media/video/davinci/vpbe.c rename to drivers/media/platform/davinci/vpbe.c diff --git a/drivers/media/video/davinci/vpbe_display.c b/drivers/media/platform/davinci/vpbe_display.c similarity index 98% rename from drivers/media/video/davinci/vpbe_display.c rename to drivers/media/platform/davinci/vpbe_display.c index 6fe7034bea7c427e9da4503ea42b4b83991bb1ec..239f37bfa313b40903d8ac4d54192747165cd87d 100644 --- a/drivers/media/video/davinci/vpbe_display.c +++ b/drivers/media/platform/davinci/vpbe_display.c @@ -629,7 +629,7 @@ static int vpbe_display_querycap(struct file *file, void *priv, } static int vpbe_display_s_crop(struct file *file, void *priv, - struct v4l2_crop *crop) + const struct v4l2_crop *crop) { struct vpbe_fh *fh = file->private_data; struct vpbe_layer *layer = fh->layer; @@ -1376,10 +1376,15 @@ static int vpbe_display_mmap(struct file *filep, struct vm_area_struct *vma) struct vpbe_fh *fh = filep->private_data; struct vpbe_layer *layer = fh->layer; struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_mmap\n"); - return videobuf_mmap_mapper(&layer->buffer_queue, vma); + if (mutex_lock_interruptible(&layer->opslock)) + return -ERESTARTSYS; + ret = videobuf_mmap_mapper(&layer->buffer_queue, vma); + mutex_unlock(&layer->opslock); + return ret; } /* vpbe_display_poll(): It is used for select/poll system call @@ -1392,8 +1397,11 @@ static unsigned int vpbe_display_poll(struct file *filep, poll_table *wait) unsigned int err = 0; v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_poll\n"); - if (layer->started) + if (layer->started) { + mutex_lock(&layer->opslock); err = videobuf_poll_stream(filep, &layer->buffer_queue, wait); + mutex_unlock(&layer->opslock); + } return err; } @@ -1428,10 +1436,12 @@ static int vpbe_display_open(struct file *file) fh->disp_dev = disp_dev; if (!layer->usrs) { - + if (mutex_lock_interruptible(&layer->opslock)) + return -ERESTARTSYS; /* First claim the layer for this device */ err = osd_device->ops.request_layer(osd_device, layer->layer_info.id); + mutex_unlock(&layer->opslock); if (err < 0) { /* Couldn't get layer */ v4l2_err(&vpbe_dev->v4l2_dev, @@ -1469,6 +1479,7 @@ static int vpbe_display_release(struct file *file) v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n"); + mutex_lock(&layer->opslock); /* if this instance is doing IO */ if (fh->io_allowed) { /* Reset io_usrs member of layer object */ @@ -1503,6 +1514,7 @@ static int vpbe_display_release(struct file *file) /* Close the priority */ v4l2_prio_close(&layer->prio, fh->prio); file->private_data = NULL; + mutex_unlock(&layer->opslock); /* Free memory allocated to file handle object */ kfree(fh); @@ -1620,11 +1632,8 @@ static __devinit int init_vpbe_layer(int i, struct vpbe_display *disp_dev, vbd->ioctl_ops = &vpbe_ioctl_ops; vbd->minor = -1; vbd->v4l2_dev = &disp_dev->vpbe_dev->v4l2_dev; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vbd->flags); vbd->lock = &vpbe_display_layer->opslock; + vbd->vfl_dir = VFL_DIR_TX; if (disp_dev->vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) { diff --git a/drivers/media/video/davinci/vpbe_osd.c b/drivers/media/platform/davinci/vpbe_osd.c similarity index 100% rename from drivers/media/video/davinci/vpbe_osd.c rename to drivers/media/platform/davinci/vpbe_osd.c diff --git a/drivers/media/video/davinci/vpbe_osd_regs.h b/drivers/media/platform/davinci/vpbe_osd_regs.h similarity index 100% rename from drivers/media/video/davinci/vpbe_osd_regs.h rename to drivers/media/platform/davinci/vpbe_osd_regs.h diff --git a/drivers/media/video/davinci/vpbe_venc.c b/drivers/media/platform/davinci/vpbe_venc.c similarity index 100% rename from drivers/media/video/davinci/vpbe_venc.c rename to drivers/media/platform/davinci/vpbe_venc.c diff --git a/drivers/media/video/davinci/vpbe_venc_regs.h b/drivers/media/platform/davinci/vpbe_venc_regs.h similarity index 100% rename from drivers/media/video/davinci/vpbe_venc_regs.h rename to drivers/media/platform/davinci/vpbe_venc_regs.h diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c similarity index 99% rename from drivers/media/video/davinci/vpfe_capture.c rename to drivers/media/platform/davinci/vpfe_capture.c index 49a845fb804a006fb0951a4426d543f31ac986d0..48052cbffc2ba36d123faba417116a980706f894 100644 --- a/drivers/media/video/davinci/vpfe_capture.c +++ b/drivers/media/platform/davinci/vpfe_capture.c @@ -1131,11 +1131,11 @@ static int vpfe_s_input(struct file *file, void *priv, unsigned int index) ret = -EBUSY; goto unlock_out; } - - if (vpfe_get_subdev_input_index(vpfe_dev, - &subdev_index, - &inp_index, - index) < 0) { + ret = vpfe_get_subdev_input_index(vpfe_dev, + &subdev_index, + &inp_index, + index); + if (ret < 0) { v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n"); goto unlock_out; } @@ -1666,7 +1666,7 @@ static int vpfe_g_crop(struct file *file, void *priv, } static int vpfe_s_crop(struct file *file, void *priv, - struct v4l2_crop *crop) + const struct v4l2_crop *crop) { struct vpfe_device *vpfe_dev = video_drvdata(file); int ret = 0; @@ -1748,8 +1748,9 @@ static long vpfe_param_handler(struct file *file, void *priv, "Error setting parameters in CCDC\n"); goto unlock_out; } - if (vpfe_get_ccdc_image_format(vpfe_dev, - &vpfe_dev->fmt) < 0) { + ret = vpfe_get_ccdc_image_format(vpfe_dev, + &vpfe_dev->fmt); + if (ret < 0) { v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "Invalid image format at CCDC\n"); goto unlock_out; @@ -1829,7 +1830,7 @@ static struct vpfe_device *vpfe_initialize(void) * itself to the V4L2 driver and initializes fields of each * device objects */ -static __init int vpfe_probe(struct platform_device *pdev) +static __devinit int vpfe_probe(struct platform_device *pdev) { struct vpfe_subdev_info *sdinfo; struct vpfe_config *vpfe_cfg; diff --git a/drivers/media/video/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c similarity index 96% rename from drivers/media/video/davinci/vpif.c rename to drivers/media/platform/davinci/vpif.c index b3637aff8fee85be4eff1d5e23eeb5c6881efcdf..cff3c0ab501f6751c745fbdf9461a3dc745f837e 100644 --- a/drivers/media/video/davinci/vpif.c +++ b/drivers/media/platform/davinci/vpif.c @@ -25,6 +25,8 @@ #include #include #include +#include + #include #include "vpif.h" @@ -65,7 +67,7 @@ const struct vpif_channel_config_params ch_params[] = { .capture_format = 0, .vbi_supported = 0, .hd_sd = 1, - .dv_preset = V4L2_DV_480P59_94, + .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, }, { .name = "576p50", @@ -82,7 +84,7 @@ const struct vpif_channel_config_params ch_params[] = { .capture_format = 0, .vbi_supported = 0, .hd_sd = 1, - .dv_preset = V4L2_DV_576P50, + .dv_timings = V4L2_DV_BT_CEA_720X576P50, }, { .name = "720p50", @@ -99,7 +101,7 @@ const struct vpif_channel_config_params ch_params[] = { .capture_format = 0, .vbi_supported = 0, .hd_sd = 1, - .dv_preset = V4L2_DV_720P50, + .dv_timings = V4L2_DV_BT_CEA_1280X720P50, }, { .name = "720p60", @@ -116,7 +118,7 @@ const struct vpif_channel_config_params ch_params[] = { .capture_format = 0, .vbi_supported = 0, .hd_sd = 1, - .dv_preset = V4L2_DV_720P60, + .dv_timings = V4L2_DV_BT_CEA_1280X720P60, }, { .name = "1080I50", @@ -136,7 +138,7 @@ const struct vpif_channel_config_params ch_params[] = { .capture_format = 0, .vbi_supported = 0, .hd_sd = 1, - .dv_preset = V4L2_DV_1080I50, + .dv_timings = V4L2_DV_BT_CEA_1920X1080I50, }, { .name = "1080I60", @@ -156,7 +158,7 @@ const struct vpif_channel_config_params ch_params[] = { .capture_format = 0, .vbi_supported = 0, .hd_sd = 1, - .dv_preset = V4L2_DV_1080I60, + .dv_timings = V4L2_DV_BT_CEA_1920X1080I60, }, { .name = "1080p60", @@ -173,7 +175,7 @@ const struct vpif_channel_config_params ch_params[] = { .capture_format = 0, .vbi_supported = 0, .hd_sd = 1, - .dv_preset = V4L2_DV_1080P60, + .dv_timings = V4L2_DV_BT_CEA_1920X1080P60, }, /* SDTV formats */ @@ -417,7 +419,7 @@ int vpif_channel_getfid(u8 channel_id) } EXPORT_SYMBOL(vpif_channel_getfid); -static int __init vpif_probe(struct platform_device *pdev) +static int __devinit vpif_probe(struct platform_device *pdev) { int status = 0; diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/platform/davinci/vpif.h similarity index 99% rename from drivers/media/video/davinci/vpif.h rename to drivers/media/platform/davinci/vpif.h index c2ce4d97c279cd8aaf24983da4ea29124a6f48ce..a1ab6a0f4e9e53406d2fb91027b0479f63a35767 100644 --- a/drivers/media/video/davinci/vpif.h +++ b/drivers/media/platform/davinci/vpif.h @@ -533,7 +533,7 @@ static inline void channel2_clipping_enable(int enable) } } -/* function to enable clipping (for both active and blanking regions) on ch 2 */ +/* function to enable clipping (for both active and blanking regions) on ch 3 */ static inline void channel3_clipping_enable(int enable) { if (enable) { @@ -634,7 +634,7 @@ struct vpif_channel_config_params { * supports capturing vbi or not */ u8 hd_sd; /* HDTV (1) or SDTV (0) format */ v4l2_std_id stdid; /* SDTV format */ - u32 dv_preset; /* HDTV format */ + struct v4l2_dv_timings dv_timings; /* HDTV format */ }; extern const unsigned int vpif_ch_params_count; diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c similarity index 95% rename from drivers/media/video/davinci/vpif_capture.c rename to drivers/media/platform/davinci/vpif_capture.c index 266025e5d81d424b90ceedd4a1de6fe9c1d016e8..0bafecac4923bce09cef1850ebb3660a62401609 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/platform/davinci/vpif_capture.c @@ -339,6 +339,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count) * Set interrupt for both the fields in VPIF Register enable channel in * VPIF register */ + channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; if ((VPIF_CHANNEL0_VIDEO == ch->channel_id)) { channel0_intr_assert(); channel0_intr_enable(1); @@ -350,7 +351,6 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count) channel1_intr_enable(1); enable_channel1(1); } - channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; return 0; } @@ -551,7 +551,8 @@ static int vpif_update_std_info(struct channel_obj *ch) } } else { vpif_dbg(2, debug, "HD format\n"); - if (config->dv_preset == vid_ch->dv_preset) { + if (!memcmp(&config->dv_timings, &vid_ch->dv_timings, + sizeof(vid_ch->dv_timings))) { memcpy(std_info, config, sizeof(*config)); break; } @@ -820,10 +821,15 @@ static int vpif_mmap(struct file *filep, struct vm_area_struct *vma) struct vpif_fh *fh = filep->private_data; struct channel_obj *ch = fh->channel; struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]); + int ret; vpif_dbg(2, debug, "vpif_mmap\n"); - return vb2_mmap(&common->buffer_queue, vma); + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + ret = vb2_mmap(&common->buffer_queue, vma); + mutex_unlock(&common->lock); + return ret; } /** @@ -836,12 +842,16 @@ static unsigned int vpif_poll(struct file *filep, poll_table * wait) struct vpif_fh *fh = filep->private_data; struct channel_obj *channel = fh->channel; struct common_obj *common = &(channel->common[VPIF_VIDEO_INDEX]); + unsigned int res = 0; vpif_dbg(2, debug, "vpif_poll\n"); - if (common->started) - return vb2_poll(&common->buffer_queue, filep, wait); - return 0; + if (common->started) { + mutex_lock(&common->lock); + res = vb2_poll(&common->buffer_queue, filep, wait); + mutex_unlock(&common->lock); + } + return res; } /** @@ -895,6 +905,10 @@ static int vpif_open(struct file *filep) return -ENOMEM; } + if (mutex_lock_interruptible(&common->lock)) { + kfree(fh); + return -ERESTARTSYS; + } /* store pointer to fh in private_data member of filep */ filep->private_data = fh; fh->channel = ch; @@ -912,6 +926,7 @@ static int vpif_open(struct file *filep) /* Initialize priority of this instance to default priority */ fh->prio = V4L2_PRIORITY_UNSET; v4l2_prio_open(&ch->prio, &fh->prio); + mutex_unlock(&common->lock); return 0; } @@ -932,6 +947,7 @@ static int vpif_release(struct file *filep) common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); /* if this instance is doing IO */ if (fh->io_allowed[VPIF_VIDEO_INDEX]) { /* Reset io_usrs member of channel object */ @@ -961,6 +977,7 @@ static int vpif_release(struct file *filep) if (fh->initialized) ch->initialized = 0; + mutex_unlock(&common->lock); filep->private_data = NULL; kfree(fh); return 0; @@ -1368,8 +1385,7 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) /* Call encoder subdevice function to set the standard */ ch->video.stdid = *std_id; - ch->video.dv_preset = V4L2_DV_INVALID; - memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); + memset(&ch->video.dv_timings, 0, sizeof(ch->video.dv_timings)); /* Get the information about the standard */ if (vpif_update_std_info(ch)) { @@ -1703,108 +1719,37 @@ static int vpif_cropcap(struct file *file, void *priv, } /** - * vpif_enum_dv_presets() - ENUM_DV_PRESETS handler + * vpif_enum_dv_timings() - ENUM_DV_TIMINGS handler * @file: file ptr * @priv: file handle - * @preset: input preset + * @timings: input timings */ -static int vpif_enum_dv_presets(struct file *file, void *priv, - struct v4l2_dv_enum_preset *preset) +static int +vpif_enum_dv_timings(struct file *file, void *priv, + struct v4l2_enum_dv_timings *timings) { struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], - video, enum_dv_presets, preset); + video, enum_dv_timings, timings); } /** - * vpif_query_dv_presets() - QUERY_DV_PRESET handler + * vpif_query_dv_timings() - QUERY_DV_TIMINGS handler * @file: file ptr * @priv: file handle - * @preset: input preset + * @timings: input timings */ -static int vpif_query_dv_preset(struct file *file, void *priv, - struct v4l2_dv_preset *preset) +static int +vpif_query_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) { struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], - video, query_dv_preset, preset); -} -/** - * vpif_s_dv_presets() - S_DV_PRESETS handler - * @file: file ptr - * @priv: file handle - * @preset: input preset - */ -static int vpif_s_dv_preset(struct file *file, void *priv, - struct v4l2_dv_preset *preset) -{ - struct vpif_fh *fh = priv; - struct channel_obj *ch = fh->channel; - struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; - int ret = 0; - - if (common->started) { - vpif_dbg(1, debug, "streaming in progress\n"); - return -EBUSY; - } - - if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) || - (VPIF_CHANNEL1_VIDEO == ch->channel_id)) { - if (!fh->initialized) { - vpif_dbg(1, debug, "Channel Busy\n"); - return -EBUSY; - } - } - - ret = v4l2_prio_check(&ch->prio, fh->prio); - if (ret) - return ret; - - fh->initialized = 1; - - /* Call encoder subdevice function to set the standard */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - - ch->video.dv_preset = preset->preset; - ch->video.stdid = V4L2_STD_UNKNOWN; - memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); - - /* Get the information about the standard */ - if (vpif_update_std_info(ch)) { - vpif_dbg(1, debug, "Error getting the standard info\n"); - ret = -EINVAL; - } else { - /* Configure the default format information */ - vpif_config_format(ch); - - ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], - video, s_dv_preset, preset); - } - - mutex_unlock(&common->lock); - - return ret; -} -/** - * vpif_g_dv_presets() - G_DV_PRESETS handler - * @file: file ptr - * @priv: file handle - * @preset: input preset - */ -static int vpif_g_dv_preset(struct file *file, void *priv, - struct v4l2_dv_preset *preset) -{ - struct vpif_fh *fh = priv; - struct channel_obj *ch = fh->channel; - - preset->preset = ch->video.dv_preset; - - return 0; + video, query_dv_timings, timings); } /** @@ -1821,7 +1766,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv, struct vpif_params *vpifparams = &ch->vpifparams; struct vpif_channel_config_params *std_info = &vpifparams->std_info; struct video_obj *vid_ch = &ch->video; - struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + struct v4l2_bt_timings *bt = &vid_ch->dv_timings.bt; int ret; if (timings->type != V4L2_DV_BT_656_1120) { @@ -1857,7 +1802,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv, return -EINVAL; } - *bt = timings->bt; + vid_ch->dv_timings = *timings; /* Configure video port timings */ @@ -1900,10 +1845,8 @@ static int vpif_s_dv_timings(struct file *file, void *priv, std_info->vbi_supported = 0; std_info->hd_sd = 1; std_info->stdid = 0; - std_info->dv_preset = V4L2_DV_INVALID; vid_ch->stdid = 0; - vid_ch->dv_preset = V4L2_DV_INVALID; return 0; } @@ -1919,9 +1862,8 @@ static int vpif_g_dv_timings(struct file *file, void *priv, struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; struct video_obj *vid_ch = &ch->video; - struct v4l2_bt_timings *bt = &vid_ch->bt_timings; - timings->bt = *bt; + *timings = vid_ch->dv_timings; return 0; } @@ -2024,10 +1966,8 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_streamon = vpif_streamon, .vidioc_streamoff = vpif_streamoff, .vidioc_cropcap = vpif_cropcap, - .vidioc_enum_dv_presets = vpif_enum_dv_presets, - .vidioc_s_dv_preset = vpif_s_dv_preset, - .vidioc_g_dv_preset = vpif_g_dv_preset, - .vidioc_query_dv_preset = vpif_query_dv_preset, + .vidioc_enum_dv_timings = vpif_enum_dv_timings, + .vidioc_query_dv_timings = vpif_query_dv_timings, .vidioc_s_dv_timings = vpif_s_dv_timings, .vidioc_g_dv_timings = vpif_g_dv_timings, .vidioc_g_chip_ident = vpif_g_chip_ident, @@ -2208,10 +2148,6 @@ static __init int vpif_probe(struct platform_device *pdev) common = &(ch->common[VPIF_VIDEO_INDEX]); spin_lock_init(&common->irqlock); mutex_init(&common->lock); - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &ch->video_dev->flags); ch->video_dev->lock = &common->lock; /* Initialize prio member of channel object */ v4l2_prio_init(&ch->prio); diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/platform/davinci/vpif_capture.h similarity index 98% rename from drivers/media/video/davinci/vpif_capture.h rename to drivers/media/platform/davinci/vpif_capture.h index 3511510f43ee32098732e0f480f1067579404a69..d24efc17e4c876537933aeff8e7a95f6aded1e28 100644 --- a/drivers/media/video/davinci/vpif_capture.h +++ b/drivers/media/platform/davinci/vpif_capture.h @@ -25,7 +25,6 @@ #include #include #include -#include #include #include @@ -54,8 +53,7 @@ struct video_obj { enum v4l2_field buf_field; /* Currently selected or default standard */ v4l2_std_id stdid; - u32 dv_preset; - struct v4l2_bt_timings bt_timings; + struct v4l2_dv_timings dv_timings; /* This is to track the last input that is passed to application */ u32 input_idx; }; diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c similarity index 94% rename from drivers/media/video/davinci/vpif_display.c rename to drivers/media/platform/davinci/vpif_display.c index e129c98921ad493b0b8ea90562d2878325218fc5..a5b88689abad1d9055c45f6624190d68734dbf30 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/platform/davinci/vpif_display.c @@ -302,6 +302,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count) /* Set interrupt for both the fields in VPIF Register enable channel in VPIF register */ + channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { channel2_intr_assert(); channel2_intr_enable(1); @@ -318,7 +319,6 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count) if (vpif_config_data->ch3_clip_en) channel3_clipping_enable(1); } - channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; return 0; } @@ -499,12 +499,6 @@ static int vpif_update_std_info(struct channel_obj *ch) memcpy(std_info, config, sizeof(*config)); break; } - } else { - vpif_dbg(2, debug, "HD format\n"); - if (config->dv_preset == vid_ch->dv_preset) { - memcpy(std_info, config, sizeof(*config)); - break; - } } } @@ -523,10 +517,10 @@ static int vpif_update_resolution(struct channel_obj *ch) struct vpif_params *vpifparams = &ch->vpifparams; struct vpif_channel_config_params *std_info = &vpifparams->std_info; - if (!vid_ch->stdid && !vid_ch->dv_preset && !vid_ch->bt_timings.height) + if (!vid_ch->stdid && !vid_ch->dv_timings.bt.height) return -EINVAL; - if (vid_ch->stdid || vid_ch->dv_preset) { + if (vid_ch->stdid) { if (vpif_update_std_info(ch)) return -EINVAL; } @@ -695,10 +689,15 @@ static int vpif_mmap(struct file *filep, struct vm_area_struct *vma) struct vpif_fh *fh = filep->private_data; struct channel_obj *ch = fh->channel; struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]); + int ret; vpif_dbg(2, debug, "vpif_mmap\n"); - return vb2_mmap(&common->buffer_queue, vma); + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + ret = vb2_mmap(&common->buffer_queue, vma); + mutex_unlock(&common->lock); + return ret; } /* @@ -709,11 +708,15 @@ static unsigned int vpif_poll(struct file *filep, poll_table *wait) struct vpif_fh *fh = filep->private_data; struct channel_obj *ch = fh->channel; struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + unsigned int res = 0; - if (common->started) - return vb2_poll(&common->buffer_queue, filep, wait); + if (common->started) { + mutex_lock(&common->lock); + res = vb2_poll(&common->buffer_queue, filep, wait); + mutex_unlock(&common->lock); + } - return 0; + return res; } /* @@ -723,10 +726,10 @@ static unsigned int vpif_poll(struct file *filep, poll_table *wait) static int vpif_open(struct file *filep) { struct video_device *vdev = video_devdata(filep); - struct channel_obj *ch = NULL; - struct vpif_fh *fh = NULL; + struct channel_obj *ch = video_get_drvdata(vdev); + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_fh *fh; - ch = video_get_drvdata(vdev); /* Allocate memory for the file handle object */ fh = kzalloc(sizeof(struct vpif_fh), GFP_KERNEL); if (fh == NULL) { @@ -734,6 +737,10 @@ static int vpif_open(struct file *filep) return -ENOMEM; } + if (mutex_lock_interruptible(&common->lock)) { + kfree(fh); + return -ERESTARTSYS; + } /* store pointer to fh in private_data member of filep */ filep->private_data = fh; fh->channel = ch; @@ -751,6 +758,7 @@ static int vpif_open(struct file *filep) /* Initialize priority of this instance to default priority */ fh->prio = V4L2_PRIORITY_UNSET; v4l2_prio_open(&ch->prio, &fh->prio); + mutex_unlock(&common->lock); return 0; } @@ -765,6 +773,7 @@ static int vpif_release(struct file *filep) struct channel_obj *ch = fh->channel; struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); /* if this instance is doing IO */ if (fh->io_allowed[VPIF_VIDEO_INDEX]) { /* Reset io_usrs member of channel object */ @@ -799,6 +808,7 @@ static int vpif_release(struct file *filep) v4l2_prio_close(&ch->prio, fh->prio); filep->private_data = NULL; fh->initialized = 0; + mutex_unlock(&common->lock); kfree(fh); return 0; @@ -1039,9 +1049,7 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) /* Call encoder subdevice function to set the standard */ ch->video.stdid = *std_id; - ch->video.dv_preset = V4L2_DV_INVALID; - memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); - + memset(&ch->video.dv_timings, 0, sizeof(ch->video.dv_timings)); /* Get the information about the standard */ if (vpif_update_resolution(ch)) return -EINVAL; @@ -1271,87 +1279,23 @@ static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p) } /** - * vpif_enum_dv_presets() - ENUM_DV_PRESETS handler + * vpif_enum_dv_timings() - ENUM_DV_TIMINGS handler * @file: file ptr * @priv: file handle - * @preset: input preset + * @timings: input timings */ -static int vpif_enum_dv_presets(struct file *file, void *priv, - struct v4l2_dv_enum_preset *preset) +static int +vpif_enum_dv_timings(struct file *file, void *priv, + struct v4l2_enum_dv_timings *timings) { struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; struct video_obj *vid_ch = &ch->video; return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], - video, enum_dv_presets, preset); + video, enum_dv_timings, timings); } -/** - * vpif_s_dv_presets() - S_DV_PRESETS handler - * @file: file ptr - * @priv: file handle - * @preset: input preset - */ -static int vpif_s_dv_preset(struct file *file, void *priv, - struct v4l2_dv_preset *preset) -{ - struct vpif_fh *fh = priv; - struct channel_obj *ch = fh->channel; - struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; - struct video_obj *vid_ch = &ch->video; - int ret = 0; - - if (common->started) { - vpif_dbg(1, debug, "streaming in progress\n"); - return -EBUSY; - } - - ret = v4l2_prio_check(&ch->prio, fh->prio); - if (ret != 0) - return ret; - - fh->initialized = 1; - - /* Call encoder subdevice function to set the standard */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - - ch->video.dv_preset = preset->preset; - ch->video.stdid = V4L2_STD_UNKNOWN; - memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); - - /* Get the information about the standard */ - if (vpif_update_resolution(ch)) { - ret = -EINVAL; - } else { - /* Configure the default format information */ - vpif_config_format(ch); - - ret = v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], - video, s_dv_preset, preset); - } - - mutex_unlock(&common->lock); - - return ret; -} -/** - * vpif_g_dv_presets() - G_DV_PRESETS handler - * @file: file ptr - * @priv: file handle - * @preset: input preset - */ -static int vpif_g_dv_preset(struct file *file, void *priv, - struct v4l2_dv_preset *preset) -{ - struct vpif_fh *fh = priv; - struct channel_obj *ch = fh->channel; - - preset->preset = ch->video.dv_preset; - - return 0; -} /** * vpif_s_dv_timings() - S_DV_TIMINGS handler * @file: file ptr @@ -1366,7 +1310,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv, struct vpif_params *vpifparams = &ch->vpifparams; struct vpif_channel_config_params *std_info = &vpifparams->std_info; struct video_obj *vid_ch = &ch->video; - struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + struct v4l2_bt_timings *bt = &vid_ch->dv_timings.bt; int ret; if (timings->type != V4L2_DV_BT_656_1120) { @@ -1402,7 +1346,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv, return -EINVAL; } - *bt = timings->bt; + vid_ch->dv_timings = *timings; /* Configure video port timings */ @@ -1446,10 +1390,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv, std_info->vbi_supported = 0; std_info->hd_sd = 1; std_info->stdid = 0; - std_info->dv_preset = V4L2_DV_INVALID; - vid_ch->stdid = 0; - vid_ch->dv_preset = V4L2_DV_INVALID; return 0; } @@ -1466,9 +1407,8 @@ static int vpif_g_dv_timings(struct file *file, void *priv, struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; struct video_obj *vid_ch = &ch->video; - struct v4l2_bt_timings *bt = &vid_ch->bt_timings; - timings->bt = *bt; + *timings = vid_ch->dv_timings; return 0; } @@ -1572,9 +1512,7 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_s_output = vpif_s_output, .vidioc_g_output = vpif_g_output, .vidioc_cropcap = vpif_cropcap, - .vidioc_enum_dv_presets = vpif_enum_dv_presets, - .vidioc_s_dv_preset = vpif_s_dv_preset, - .vidioc_g_dv_preset = vpif_g_dv_preset, + .vidioc_enum_dv_timings = vpif_enum_dv_timings, .vidioc_s_dv_timings = vpif_s_dv_timings, .vidioc_g_dv_timings = vpif_g_dv_timings, .vidioc_g_chip_ident = vpif_g_chip_ident, @@ -1729,6 +1667,7 @@ static __init int vpif_probe(struct platform_device *pdev) *vfd = vpif_video_template; vfd->v4l2_dev = &vpif_obj.v4l2_dev; vfd->release = video_device_release; + vfd->vfl_dir = VFL_DIR_TX; snprintf(vfd->name, sizeof(vfd->name), "VPIF_Display_DRIVER_V%s", VPIF_DISPLAY_VERSION); @@ -1789,10 +1728,6 @@ static __init int vpif_probe(struct platform_device *pdev) v4l2_prio_init(&ch->prio); ch->common[VPIF_VIDEO_INDEX].fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &ch->video_dev->flags); ch->video_dev->lock = &common->lock; /* register video device */ diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/platform/davinci/vpif_display.h similarity index 98% rename from drivers/media/video/davinci/vpif_display.h rename to drivers/media/platform/davinci/vpif_display.h index 8967ffb4405846ec6ffa0213eb747a19448af232..f628ebcf36747110c78c86f4b904d76a5fca2ff8 100644 --- a/drivers/media/video/davinci/vpif_display.h +++ b/drivers/media/platform/davinci/vpif_display.h @@ -20,7 +20,6 @@ #include #include #include -#include #include #include @@ -62,8 +61,7 @@ struct video_obj { * most recent displayed frame only */ v4l2_std_id stdid; /* Currently selected or default * standard */ - u32 dv_preset; - struct v4l2_bt_timings bt_timings; + struct v4l2_dv_timings dv_timings; u32 output_id; /* Current output id */ }; diff --git a/drivers/media/video/davinci/vpss.c b/drivers/media/platform/davinci/vpss.c similarity index 99% rename from drivers/media/video/davinci/vpss.c rename to drivers/media/platform/davinci/vpss.c index 3e5cf27ec2b29abe2165e180a6bfddba64833514..146e4b01ac177593b58ad5c7fadc1724d2118973 100644 --- a/drivers/media/video/davinci/vpss.c +++ b/drivers/media/platform/davinci/vpss.c @@ -357,7 +357,7 @@ void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size) } EXPORT_SYMBOL(dm365_vpss_set_pg_frame_size); -static int __init vpss_probe(struct platform_device *pdev) +static int __devinit vpss_probe(struct platform_device *pdev) { struct resource *r1, *r2; char *platform_name; diff --git a/drivers/media/platform/exynos-gsc/Makefile b/drivers/media/platform/exynos-gsc/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..6d1411c6d49f970664ac773eaa0e0d941e09426a --- /dev/null +++ b/drivers/media/platform/exynos-gsc/Makefile @@ -0,0 +1,3 @@ +exynos-gsc-objs := gsc-core.o gsc-m2m.o gsc-regs.o + +obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC) += exynos-gsc.o diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c new file mode 100644 index 0000000000000000000000000000000000000000..bfec9e65aefbd78cca43638f7ffe5bdbc339c3ae --- /dev/null +++ b/drivers/media/platform/exynos-gsc/gsc-core.c @@ -0,0 +1,1252 @@ +/* + * Copyright (c) 2011 - 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung EXYNOS5 SoC series G-Scaler driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation, either version 2 of the License, + * or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "gsc-core.h" + +#define GSC_CLOCK_GATE_NAME "gscl" + +static const struct gsc_fmt gsc_formats[] = { + { + .name = "RGB565", + .pixelformat = V4L2_PIX_FMT_RGB565X, + .depth = { 16 }, + .color = GSC_RGB, + .num_planes = 1, + .num_comp = 1, + }, { + .name = "XRGB-8-8-8-8, 32 bpp", + .pixelformat = V4L2_PIX_FMT_RGB32, + .depth = { 32 }, + .color = GSC_RGB, + .num_planes = 1, + .num_comp = 1, + }, { + .name = "YUV 4:2:2 packed, YCbYCr", + .pixelformat = V4L2_PIX_FMT_YUYV, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 1, + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + }, { + .name = "YUV 4:2:2 packed, CbYCrY", + .pixelformat = V4L2_PIX_FMT_UYVY, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_C, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 1, + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + }, { + .name = "YUV 4:2:2 packed, CrYCbY", + .pixelformat = V4L2_PIX_FMT_VYUY, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_C, + .corder = GSC_CRCB, + .num_planes = 1, + .num_comp = 1, + .mbus_code = V4L2_MBUS_FMT_VYUY8_2X8, + }, { + .name = "YUV 4:2:2 packed, YCrYCb", + .pixelformat = V4L2_PIX_FMT_YVYU, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_Y, + .corder = GSC_CRCB, + .num_planes = 1, + .num_comp = 1, + .mbus_code = V4L2_MBUS_FMT_YVYU8_2X8, + }, { + .name = "YUV 4:4:4 planar, YCbYCr", + .pixelformat = V4L2_PIX_FMT_YUV32, + .depth = { 32 }, + .color = GSC_YUV444, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 1, + }, { + .name = "YUV 4:2:2 planar, Y/Cb/Cr", + .pixelformat = V4L2_PIX_FMT_YUV422P, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 3, + }, { + .name = "YUV 4:2:2 planar, Y/CbCr", + .pixelformat = V4L2_PIX_FMT_NV16, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 2, + }, { + .name = "YUV 4:2:2 planar, Y/CrCb", + .pixelformat = V4L2_PIX_FMT_NV61, + .depth = { 16 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_Y, + .corder = GSC_CRCB, + .num_planes = 1, + .num_comp = 2, + }, { + .name = "YUV 4:2:0 planar, YCbCr", + .pixelformat = V4L2_PIX_FMT_YUV420, + .depth = { 12 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 3, + }, { + .name = "YUV 4:2:0 planar, YCrCb", + .pixelformat = V4L2_PIX_FMT_YVU420, + .depth = { 12 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CRCB, + .num_planes = 1, + .num_comp = 3, + + }, { + .name = "YUV 4:2:0 planar, Y/CbCr", + .pixelformat = V4L2_PIX_FMT_NV12, + .depth = { 12 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 1, + .num_comp = 2, + }, { + .name = "YUV 4:2:0 planar, Y/CrCb", + .pixelformat = V4L2_PIX_FMT_NV21, + .depth = { 12 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CRCB, + .num_planes = 1, + .num_comp = 2, + }, { + .name = "YUV 4:2:0 non-contig. 2p, Y/CbCr", + .pixelformat = V4L2_PIX_FMT_NV12M, + .depth = { 8, 4 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 2, + .num_comp = 2, + }, { + .name = "YUV 4:2:0 non-contig. 3p, Y/Cb/Cr", + .pixelformat = V4L2_PIX_FMT_YUV420M, + .depth = { 8, 2, 2 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 3, + .num_comp = 3, + }, { + .name = "YUV 4:2:0 non-contig. 3p, Y/Cr/Cb", + .pixelformat = V4L2_PIX_FMT_YVU420M, + .depth = { 8, 2, 2 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CRCB, + .num_planes = 3, + .num_comp = 3, + } +}; + +const struct gsc_fmt *get_format(int index) +{ + if (index >= ARRAY_SIZE(gsc_formats)) + return NULL; + + return (struct gsc_fmt *)&gsc_formats[index]; +} + +const struct gsc_fmt *find_fmt(u32 *pixelformat, u32 *mbus_code, u32 index) +{ + const struct gsc_fmt *fmt, *def_fmt = NULL; + unsigned int i; + + if (index >= ARRAY_SIZE(gsc_formats)) + return NULL; + + for (i = 0; i < ARRAY_SIZE(gsc_formats); ++i) { + fmt = get_format(i); + if (pixelformat && fmt->pixelformat == *pixelformat) + return fmt; + if (mbus_code && fmt->mbus_code == *mbus_code) + return fmt; + if (index == i) + def_fmt = fmt; + } + return def_fmt; + +} + +void gsc_set_frame_size(struct gsc_frame *frame, int width, int height) +{ + frame->f_width = width; + frame->f_height = height; + frame->crop.width = width; + frame->crop.height = height; + frame->crop.left = 0; + frame->crop.top = 0; +} + +int gsc_cal_prescaler_ratio(struct gsc_variant *var, u32 src, u32 dst, + u32 *ratio) +{ + if ((dst > src) || (dst >= src / var->poly_sc_down_max)) { + *ratio = 1; + return 0; + } + + if ((src / var->poly_sc_down_max / var->pre_sc_down_max) > dst) { + pr_err("Exceeded maximum downscaling ratio (1/16))"); + return -EINVAL; + } + + *ratio = (dst > (src / 8)) ? 2 : 4; + + return 0; +} + +void gsc_get_prescaler_shfactor(u32 hratio, u32 vratio, u32 *sh) +{ + if (hratio == 4 && vratio == 4) + *sh = 4; + else if ((hratio == 4 && vratio == 2) || + (hratio == 2 && vratio == 4)) + *sh = 3; + else if ((hratio == 4 && vratio == 1) || + (hratio == 1 && vratio == 4) || + (hratio == 2 && vratio == 2)) + *sh = 2; + else if (hratio == 1 && vratio == 1) + *sh = 0; + else + *sh = 1; +} + +void gsc_check_src_scale_info(struct gsc_variant *var, + struct gsc_frame *s_frame, u32 *wratio, + u32 tx, u32 ty, u32 *hratio) +{ + int remainder = 0, walign, halign; + + if (is_yuv420(s_frame->fmt->color)) { + walign = GSC_SC_ALIGN_4; + halign = GSC_SC_ALIGN_4; + } else if (is_yuv422(s_frame->fmt->color)) { + walign = GSC_SC_ALIGN_4; + halign = GSC_SC_ALIGN_2; + } else { + walign = GSC_SC_ALIGN_2; + halign = GSC_SC_ALIGN_2; + } + + remainder = s_frame->crop.width % (*wratio * walign); + if (remainder) { + s_frame->crop.width -= remainder; + gsc_cal_prescaler_ratio(var, s_frame->crop.width, tx, wratio); + pr_info("cropped src width size is recalculated from %d to %d", + s_frame->crop.width + remainder, s_frame->crop.width); + } + + remainder = s_frame->crop.height % (*hratio * halign); + if (remainder) { + s_frame->crop.height -= remainder; + gsc_cal_prescaler_ratio(var, s_frame->crop.height, ty, hratio); + pr_info("cropped src height size is recalculated from %d to %d", + s_frame->crop.height + remainder, s_frame->crop.height); + } +} + +int gsc_enum_fmt_mplane(struct v4l2_fmtdesc *f) +{ + const struct gsc_fmt *fmt; + + fmt = find_fmt(NULL, NULL, f->index); + if (!fmt) + return -EINVAL; + + strlcpy(f->description, fmt->name, sizeof(f->description)); + f->pixelformat = fmt->pixelformat; + + return 0; +} + +static u32 get_plane_info(struct gsc_frame *frm, u32 addr, u32 *index) +{ + if (frm->addr.y == addr) { + *index = 0; + return frm->addr.y; + } else if (frm->addr.cb == addr) { + *index = 1; + return frm->addr.cb; + } else if (frm->addr.cr == addr) { + *index = 2; + return frm->addr.cr; + } else { + pr_err("Plane address is wrong"); + return -EINVAL; + } +} + +void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm) +{ + u32 f_chk_addr, f_chk_len, s_chk_addr, s_chk_len; + f_chk_addr = f_chk_len = s_chk_addr = s_chk_len = 0; + + f_chk_addr = frm->addr.y; + f_chk_len = frm->payload[0]; + if (frm->fmt->num_planes == 2) { + s_chk_addr = frm->addr.cb; + s_chk_len = frm->payload[1]; + } else if (frm->fmt->num_planes == 3) { + u32 low_addr, low_plane, mid_addr, mid_plane; + u32 high_addr, high_plane; + u32 t_min, t_max; + + t_min = min3(frm->addr.y, frm->addr.cb, frm->addr.cr); + low_addr = get_plane_info(frm, t_min, &low_plane); + t_max = max3(frm->addr.y, frm->addr.cb, frm->addr.cr); + high_addr = get_plane_info(frm, t_max, &high_plane); + + mid_plane = 3 - (low_plane + high_plane); + if (mid_plane == 0) + mid_addr = frm->addr.y; + else if (mid_plane == 1) + mid_addr = frm->addr.cb; + else if (mid_plane == 2) + mid_addr = frm->addr.cr; + else + return; + + f_chk_addr = low_addr; + if (mid_addr + frm->payload[mid_plane] - low_addr > + high_addr + frm->payload[high_plane] - mid_addr) { + f_chk_len = frm->payload[low_plane]; + s_chk_addr = mid_addr; + s_chk_len = high_addr + + frm->payload[high_plane] - mid_addr; + } else { + f_chk_len = mid_addr + + frm->payload[mid_plane] - low_addr; + s_chk_addr = high_addr; + s_chk_len = frm->payload[high_plane]; + } + } + pr_debug("f_addr = 0x%08x, f_len = %d, s_addr = 0x%08x, s_len = %d\n", + f_chk_addr, f_chk_len, s_chk_addr, s_chk_len); +} + +int gsc_try_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f) +{ + struct gsc_dev *gsc = ctx->gsc_dev; + struct gsc_variant *variant = gsc->variant; + struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp; + const struct gsc_fmt *fmt; + u32 max_w, max_h, mod_x, mod_y; + u32 min_w, min_h, tmp_w, tmp_h; + int i; + + pr_debug("user put w: %d, h: %d", pix_mp->width, pix_mp->height); + + fmt = find_fmt(&pix_mp->pixelformat, NULL, 0); + if (!fmt) { + pr_err("pixelformat format (0x%X) invalid\n", + pix_mp->pixelformat); + return -EINVAL; + } + + if (pix_mp->field == V4L2_FIELD_ANY) + pix_mp->field = V4L2_FIELD_NONE; + else if (pix_mp->field != V4L2_FIELD_NONE) { + pr_err("Not supported field order(%d)\n", pix_mp->field); + return -EINVAL; + } + + max_w = variant->pix_max->target_rot_dis_w; + max_h = variant->pix_max->target_rot_dis_h; + + mod_x = ffs(variant->pix_align->org_w) - 1; + if (is_yuv420(fmt->color)) + mod_y = ffs(variant->pix_align->org_h) - 1; + else + mod_y = ffs(variant->pix_align->org_h) - 2; + + if (V4L2_TYPE_IS_OUTPUT(f->type)) { + min_w = variant->pix_min->org_w; + min_h = variant->pix_min->org_h; + } else { + min_w = variant->pix_min->target_rot_dis_w; + min_h = variant->pix_min->target_rot_dis_h; + } + + pr_debug("mod_x: %d, mod_y: %d, max_w: %d, max_h = %d", + mod_x, mod_y, max_w, max_h); + + /* To check if image size is modified to adjust parameter against + hardware abilities */ + tmp_w = pix_mp->width; + tmp_h = pix_mp->height; + + v4l_bound_align_image(&pix_mp->width, min_w, max_w, mod_x, + &pix_mp->height, min_h, max_h, mod_y, 0); + if (tmp_w != pix_mp->width || tmp_h != pix_mp->height) + pr_info("Image size has been modified from %dx%d to %dx%d", + tmp_w, tmp_h, pix_mp->width, pix_mp->height); + + pix_mp->num_planes = fmt->num_planes; + + if (pix_mp->width >= 1280) /* HD */ + pix_mp->colorspace = V4L2_COLORSPACE_REC709; + else /* SD */ + pix_mp->colorspace = V4L2_COLORSPACE_SMPTE170M; + + + for (i = 0; i < pix_mp->num_planes; ++i) { + int bpl = (pix_mp->width * fmt->depth[i]) >> 3; + pix_mp->plane_fmt[i].bytesperline = bpl; + pix_mp->plane_fmt[i].sizeimage = bpl * pix_mp->height; + + pr_debug("[%d]: bpl: %d, sizeimage: %d", + i, bpl, pix_mp->plane_fmt[i].sizeimage); + } + + return 0; +} + +int gsc_g_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f) +{ + struct gsc_frame *frame; + struct v4l2_pix_format_mplane *pix_mp; + int i; + + frame = ctx_get_frame(ctx, f->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + pix_mp = &f->fmt.pix_mp; + + pix_mp->width = frame->f_width; + pix_mp->height = frame->f_height; + pix_mp->field = V4L2_FIELD_NONE; + pix_mp->pixelformat = frame->fmt->pixelformat; + pix_mp->colorspace = V4L2_COLORSPACE_REC709; + pix_mp->num_planes = frame->fmt->num_planes; + + for (i = 0; i < pix_mp->num_planes; ++i) { + pix_mp->plane_fmt[i].bytesperline = (frame->f_width * + frame->fmt->depth[i]) / 8; + pix_mp->plane_fmt[i].sizeimage = + pix_mp->plane_fmt[i].bytesperline * frame->f_height; + } + + return 0; +} + +void gsc_check_crop_change(u32 tmp_w, u32 tmp_h, u32 *w, u32 *h) +{ + if (tmp_w != *w || tmp_h != *h) { + pr_info("Cropped size has been modified from %dx%d to %dx%d", + *w, *h, tmp_w, tmp_h); + *w = tmp_w; + *h = tmp_h; + } +} + +int gsc_g_crop(struct gsc_ctx *ctx, struct v4l2_crop *cr) +{ + struct gsc_frame *frame; + + frame = ctx_get_frame(ctx, cr->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + cr->c = frame->crop; + + return 0; +} + +int gsc_try_crop(struct gsc_ctx *ctx, struct v4l2_crop *cr) +{ + struct gsc_frame *f; + struct gsc_dev *gsc = ctx->gsc_dev; + struct gsc_variant *variant = gsc->variant; + u32 mod_x = 0, mod_y = 0, tmp_w, tmp_h; + u32 min_w, min_h, max_w, max_h; + + if (cr->c.top < 0 || cr->c.left < 0) { + pr_err("doesn't support negative values for top & left\n"); + return -EINVAL; + } + pr_debug("user put w: %d, h: %d", cr->c.width, cr->c.height); + + if (cr->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + f = &ctx->d_frame; + else if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + f = &ctx->s_frame; + else + return -EINVAL; + + max_w = f->f_width; + max_h = f->f_height; + tmp_w = cr->c.width; + tmp_h = cr->c.height; + + if (V4L2_TYPE_IS_OUTPUT(cr->type)) { + if ((is_yuv422(f->fmt->color) && f->fmt->num_comp == 1) || + is_rgb(f->fmt->color)) + min_w = 32; + else + min_w = 64; + if ((is_yuv422(f->fmt->color) && f->fmt->num_comp == 3) || + is_yuv420(f->fmt->color)) + min_h = 32; + else + min_h = 16; + } else { + if (is_yuv420(f->fmt->color) || is_yuv422(f->fmt->color)) + mod_x = ffs(variant->pix_align->target_w) - 1; + if (is_yuv420(f->fmt->color)) + mod_y = ffs(variant->pix_align->target_h) - 1; + if (ctx->gsc_ctrls.rotate->val == 90 || + ctx->gsc_ctrls.rotate->val == 270) { + max_w = f->f_height; + max_h = f->f_width; + min_w = variant->pix_min->target_rot_en_w; + min_h = variant->pix_min->target_rot_en_h; + tmp_w = cr->c.height; + tmp_h = cr->c.width; + } else { + min_w = variant->pix_min->target_rot_dis_w; + min_h = variant->pix_min->target_rot_dis_h; + } + } + pr_debug("mod_x: %d, mod_y: %d, min_w: %d, min_h = %d", + mod_x, mod_y, min_w, min_h); + pr_debug("tmp_w : %d, tmp_h : %d", tmp_w, tmp_h); + + v4l_bound_align_image(&tmp_w, min_w, max_w, mod_x, + &tmp_h, min_h, max_h, mod_y, 0); + + if (!V4L2_TYPE_IS_OUTPUT(cr->type) && + (ctx->gsc_ctrls.rotate->val == 90 || + ctx->gsc_ctrls.rotate->val == 270)) + gsc_check_crop_change(tmp_h, tmp_w, + &cr->c.width, &cr->c.height); + else + gsc_check_crop_change(tmp_w, tmp_h, + &cr->c.width, &cr->c.height); + + + /* adjust left/top if cropping rectangle is out of bounds */ + /* Need to add code to algin left value with 2's multiple */ + if (cr->c.left + tmp_w > max_w) + cr->c.left = max_w - tmp_w; + if (cr->c.top + tmp_h > max_h) + cr->c.top = max_h - tmp_h; + + if ((is_yuv420(f->fmt->color) || is_yuv422(f->fmt->color)) && + cr->c.left & 1) + cr->c.left -= 1; + + pr_debug("Aligned l:%d, t:%d, w:%d, h:%d, f_w: %d, f_h: %d", + cr->c.left, cr->c.top, cr->c.width, cr->c.height, max_w, max_h); + + return 0; +} + +int gsc_check_scaler_ratio(struct gsc_variant *var, int sw, int sh, int dw, + int dh, int rot, int out_path) +{ + int tmp_w, tmp_h, sc_down_max; + + if (out_path == GSC_DMA) + sc_down_max = var->sc_down_max; + else + sc_down_max = var->local_sc_down; + + if (rot == 90 || rot == 270) { + tmp_w = dh; + tmp_h = dw; + } else { + tmp_w = dw; + tmp_h = dh; + } + + if ((sw / tmp_w) > sc_down_max || + (sh / tmp_h) > sc_down_max || + (tmp_w / sw) > var->sc_up_max || + (tmp_h / sh) > var->sc_up_max) + return -EINVAL; + + return 0; +} + +int gsc_set_scaler_info(struct gsc_ctx *ctx) +{ + struct gsc_scaler *sc = &ctx->scaler; + struct gsc_frame *s_frame = &ctx->s_frame; + struct gsc_frame *d_frame = &ctx->d_frame; + struct gsc_variant *variant = ctx->gsc_dev->variant; + struct device *dev = &ctx->gsc_dev->pdev->dev; + int tx, ty; + int ret; + + ret = gsc_check_scaler_ratio(variant, s_frame->crop.width, + s_frame->crop.height, d_frame->crop.width, d_frame->crop.height, + ctx->gsc_ctrls.rotate->val, ctx->out_path); + if (ret) { + pr_err("out of scaler range"); + return ret; + } + + if (ctx->gsc_ctrls.rotate->val == 90 || + ctx->gsc_ctrls.rotate->val == 270) { + ty = d_frame->crop.width; + tx = d_frame->crop.height; + } else { + tx = d_frame->crop.width; + ty = d_frame->crop.height; + } + + if (tx <= 0 || ty <= 0) { + dev_err(dev, "Invalid target size: %dx%d", tx, ty); + return -EINVAL; + } + + ret = gsc_cal_prescaler_ratio(variant, s_frame->crop.width, + tx, &sc->pre_hratio); + if (ret) { + pr_err("Horizontal scale ratio is out of range"); + return ret; + } + + ret = gsc_cal_prescaler_ratio(variant, s_frame->crop.height, + ty, &sc->pre_vratio); + if (ret) { + pr_err("Vertical scale ratio is out of range"); + return ret; + } + + gsc_check_src_scale_info(variant, s_frame, &sc->pre_hratio, + tx, ty, &sc->pre_vratio); + + gsc_get_prescaler_shfactor(sc->pre_hratio, sc->pre_vratio, + &sc->pre_shfactor); + + sc->main_hratio = (s_frame->crop.width << 16) / tx; + sc->main_vratio = (s_frame->crop.height << 16) / ty; + + pr_debug("scaler input/output size : sx = %d, sy = %d, tx = %d, ty = %d", + s_frame->crop.width, s_frame->crop.height, tx, ty); + pr_debug("scaler ratio info : pre_shfactor : %d, pre_h : %d", + sc->pre_shfactor, sc->pre_hratio); + pr_debug("pre_v :%d, main_h : %d, main_v : %d", + sc->pre_vratio, sc->main_hratio, sc->main_vratio); + + return 0; +} + +static int __gsc_s_ctrl(struct gsc_ctx *ctx, struct v4l2_ctrl *ctrl) +{ + struct gsc_dev *gsc = ctx->gsc_dev; + struct gsc_variant *variant = gsc->variant; + unsigned int flags = GSC_DST_FMT | GSC_SRC_FMT; + int ret = 0; + + if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE) + return 0; + + switch (ctrl->id) { + case V4L2_CID_HFLIP: + ctx->hflip = ctrl->val; + break; + + case V4L2_CID_VFLIP: + ctx->vflip = ctrl->val; + break; + + case V4L2_CID_ROTATE: + if ((ctx->state & flags) == flags) { + ret = gsc_check_scaler_ratio(variant, + ctx->s_frame.crop.width, + ctx->s_frame.crop.height, + ctx->d_frame.crop.width, + ctx->d_frame.crop.height, + ctx->gsc_ctrls.rotate->val, + ctx->out_path); + + if (ret) + return -EINVAL; + } + + ctx->rotation = ctrl->val; + break; + + case V4L2_CID_ALPHA_COMPONENT: + ctx->d_frame.alpha = ctrl->val; + break; + } + + ctx->state |= GSC_PARAMS; + return 0; +} + +static int gsc_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct gsc_ctx *ctx = ctrl_to_ctx(ctrl); + unsigned long flags; + int ret; + + spin_lock_irqsave(&ctx->gsc_dev->slock, flags); + ret = __gsc_s_ctrl(ctx, ctrl); + spin_unlock_irqrestore(&ctx->gsc_dev->slock, flags); + + return ret; +} + +static const struct v4l2_ctrl_ops gsc_ctrl_ops = { + .s_ctrl = gsc_s_ctrl, +}; + +int gsc_ctrls_create(struct gsc_ctx *ctx) +{ + if (ctx->ctrls_rdy) { + pr_err("Control handler of this context was created already"); + return 0; + } + + v4l2_ctrl_handler_init(&ctx->ctrl_handler, GSC_MAX_CTRL_NUM); + + ctx->gsc_ctrls.rotate = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &gsc_ctrl_ops, V4L2_CID_ROTATE, 0, 270, 90, 0); + ctx->gsc_ctrls.hflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &gsc_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0); + ctx->gsc_ctrls.vflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &gsc_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); + ctx->gsc_ctrls.global_alpha = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &gsc_ctrl_ops, V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 0); + + ctx->ctrls_rdy = ctx->ctrl_handler.error == 0; + + if (ctx->ctrl_handler.error) { + int err = ctx->ctrl_handler.error; + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + pr_err("Failed to create G-Scaler control handlers"); + return err; + } + + return 0; +} + +void gsc_ctrls_delete(struct gsc_ctx *ctx) +{ + if (ctx->ctrls_rdy) { + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + ctx->ctrls_rdy = false; + } +} + +/* The color format (num_comp, num_planes) must be already configured. */ +int gsc_prepare_addr(struct gsc_ctx *ctx, struct vb2_buffer *vb, + struct gsc_frame *frame, struct gsc_addr *addr) +{ + int ret = 0; + u32 pix_size; + + if ((vb == NULL) || (frame == NULL)) + return -EINVAL; + + pix_size = frame->f_width * frame->f_height; + + pr_debug("num_planes= %d, num_comp= %d, pix_size= %d", + frame->fmt->num_planes, frame->fmt->num_comp, pix_size); + + addr->y = vb2_dma_contig_plane_dma_addr(vb, 0); + + if (frame->fmt->num_planes == 1) { + switch (frame->fmt->num_comp) { + case 1: + addr->cb = 0; + addr->cr = 0; + break; + case 2: + /* decompose Y into Y/Cb */ + addr->cb = (dma_addr_t)(addr->y + pix_size); + addr->cr = 0; + break; + case 3: + /* decompose Y into Y/Cb/Cr */ + addr->cb = (dma_addr_t)(addr->y + pix_size); + if (GSC_YUV420 == frame->fmt->color) + addr->cr = (dma_addr_t)(addr->cb + + (pix_size >> 2)); + else /* 422 */ + addr->cr = (dma_addr_t)(addr->cb + + (pix_size >> 1)); + break; + default: + pr_err("Invalid the number of color planes"); + return -EINVAL; + } + } else { + if (frame->fmt->num_planes >= 2) + addr->cb = vb2_dma_contig_plane_dma_addr(vb, 1); + + if (frame->fmt->num_planes == 3) + addr->cr = vb2_dma_contig_plane_dma_addr(vb, 2); + } + + if ((frame->fmt->pixelformat == V4L2_PIX_FMT_VYUY) || + (frame->fmt->pixelformat == V4L2_PIX_FMT_YVYU) || + (frame->fmt->pixelformat == V4L2_PIX_FMT_NV61) || + (frame->fmt->pixelformat == V4L2_PIX_FMT_YVU420) || + (frame->fmt->pixelformat == V4L2_PIX_FMT_NV21) || + (frame->fmt->pixelformat == V4L2_PIX_FMT_YVU420M)) + swap(addr->cb, addr->cr); + + pr_debug("ADDR: y= 0x%X cb= 0x%X cr= 0x%X ret= %d", + addr->y, addr->cb, addr->cr, ret); + + return ret; +} + +static irqreturn_t gsc_irq_handler(int irq, void *priv) +{ + struct gsc_dev *gsc = priv; + struct gsc_ctx *ctx; + int gsc_irq; + + gsc_irq = gsc_hw_get_irq_status(gsc); + gsc_hw_clear_irq(gsc, gsc_irq); + + if (gsc_irq == GSC_IRQ_OVERRUN) { + pr_err("Local path input over-run interrupt has occurred!\n"); + return IRQ_HANDLED; + } + + spin_lock(&gsc->slock); + + if (test_and_clear_bit(ST_M2M_PEND, &gsc->state)) { + + gsc_hw_enable_control(gsc, false); + + if (test_and_clear_bit(ST_M2M_SUSPENDING, &gsc->state)) { + set_bit(ST_M2M_SUSPENDED, &gsc->state); + wake_up(&gsc->irq_queue); + goto isr_unlock; + } + ctx = v4l2_m2m_get_curr_priv(gsc->m2m.m2m_dev); + + if (!ctx || !ctx->m2m_ctx) + goto isr_unlock; + + spin_unlock(&gsc->slock); + gsc_m2m_job_finish(ctx, VB2_BUF_STATE_DONE); + + /* wake_up job_abort, stop_streaming */ + if (ctx->state & GSC_CTX_STOP_REQ) { + ctx->state &= ~GSC_CTX_STOP_REQ; + wake_up(&gsc->irq_queue); + } + return IRQ_HANDLED; + } + +isr_unlock: + spin_unlock(&gsc->slock); + return IRQ_HANDLED; +} + +static struct gsc_pix_max gsc_v_100_max = { + .org_scaler_bypass_w = 8192, + .org_scaler_bypass_h = 8192, + .org_scaler_input_w = 4800, + .org_scaler_input_h = 3344, + .real_rot_dis_w = 4800, + .real_rot_dis_h = 3344, + .real_rot_en_w = 2047, + .real_rot_en_h = 2047, + .target_rot_dis_w = 4800, + .target_rot_dis_h = 3344, + .target_rot_en_w = 2016, + .target_rot_en_h = 2016, +}; + +static struct gsc_pix_min gsc_v_100_min = { + .org_w = 64, + .org_h = 32, + .real_w = 64, + .real_h = 32, + .target_rot_dis_w = 64, + .target_rot_dis_h = 32, + .target_rot_en_w = 32, + .target_rot_en_h = 16, +}; + +static struct gsc_pix_align gsc_v_100_align = { + .org_h = 16, + .org_w = 16, /* yuv420 : 16, others : 8 */ + .offset_h = 2, /* yuv420/422 : 2, others : 1 */ + .real_w = 16, /* yuv420/422 : 4~16, others : 2~8 */ + .real_h = 16, /* yuv420 : 4~16, others : 1 */ + .target_w = 2, /* yuv420/422 : 2, others : 1 */ + .target_h = 2, /* yuv420 : 2, others : 1 */ +}; + +static struct gsc_variant gsc_v_100_variant = { + .pix_max = &gsc_v_100_max, + .pix_min = &gsc_v_100_min, + .pix_align = &gsc_v_100_align, + .in_buf_cnt = 8, + .out_buf_cnt = 16, + .sc_up_max = 8, + .sc_down_max = 16, + .poly_sc_down_max = 4, + .pre_sc_down_max = 4, + .local_sc_down = 2, +}; + +static struct gsc_driverdata gsc_v_100_drvdata = { + .variant = { + [0] = &gsc_v_100_variant, + [1] = &gsc_v_100_variant, + [2] = &gsc_v_100_variant, + [3] = &gsc_v_100_variant, + }, + .num_entities = 4, + .lclk_frequency = 266000000UL, +}; + +static struct platform_device_id gsc_driver_ids[] = { + { + .name = "exynos-gsc", + .driver_data = (unsigned long)&gsc_v_100_drvdata, + }, + {}, +}; +MODULE_DEVICE_TABLE(platform, gsc_driver_ids); + +static const struct of_device_id exynos_gsc_match[] = { + { .compatible = "samsung,exynos5250-gsc", + .data = &gsc_v_100_drvdata, }, + {}, +}; +MODULE_DEVICE_TABLE(of, exynos_gsc_match); + +static void *gsc_get_drv_data(struct platform_device *pdev) +{ + struct gsc_driverdata *driver_data = NULL; + + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(of_match_ptr(exynos_gsc_match), + pdev->dev.of_node); + if (match) + driver_data = match->data; + } else { + driver_data = (struct gsc_driverdata *) + platform_get_device_id(pdev)->driver_data; + } + + return driver_data; +} + +static void gsc_clk_put(struct gsc_dev *gsc) +{ + if (IS_ERR_OR_NULL(gsc->clock)) + return; + + clk_unprepare(gsc->clock); + clk_put(gsc->clock); + gsc->clock = NULL; +} + +static int gsc_clk_get(struct gsc_dev *gsc) +{ + int ret; + + dev_dbg(&gsc->pdev->dev, "gsc_clk_get Called\n"); + + gsc->clock = clk_get(&gsc->pdev->dev, GSC_CLOCK_GATE_NAME); + if (IS_ERR(gsc->clock)) + goto err_print; + + ret = clk_prepare(gsc->clock); + if (ret < 0) { + clk_put(gsc->clock); + gsc->clock = NULL; + goto err; + } + + return 0; + +err: + dev_err(&gsc->pdev->dev, "clock prepare failed for clock: %s\n", + GSC_CLOCK_GATE_NAME); + gsc_clk_put(gsc); +err_print: + dev_err(&gsc->pdev->dev, "failed to get clock~~~: %s\n", + GSC_CLOCK_GATE_NAME); + return -ENXIO; +} + +static int gsc_m2m_suspend(struct gsc_dev *gsc) +{ + unsigned long flags; + int timeout; + + spin_lock_irqsave(&gsc->slock, flags); + if (!gsc_m2m_pending(gsc)) { + spin_unlock_irqrestore(&gsc->slock, flags); + return 0; + } + clear_bit(ST_M2M_SUSPENDED, &gsc->state); + set_bit(ST_M2M_SUSPENDING, &gsc->state); + spin_unlock_irqrestore(&gsc->slock, flags); + + timeout = wait_event_timeout(gsc->irq_queue, + test_bit(ST_M2M_SUSPENDED, &gsc->state), + GSC_SHUTDOWN_TIMEOUT); + + clear_bit(ST_M2M_SUSPENDING, &gsc->state); + return timeout == 0 ? -EAGAIN : 0; +} + +static int gsc_m2m_resume(struct gsc_dev *gsc) +{ + unsigned long flags; + + spin_lock_irqsave(&gsc->slock, flags); + /* Clear for full H/W setup in first run after resume */ + gsc->m2m.ctx = NULL; + spin_unlock_irqrestore(&gsc->slock, flags); + + if (test_and_clear_bit(ST_M2M_SUSPENDED, &gsc->state)) + gsc_m2m_job_finish(gsc->m2m.ctx, + VB2_BUF_STATE_ERROR); + return 0; +} + +static int gsc_probe(struct platform_device *pdev) +{ + struct gsc_dev *gsc; + struct resource *res; + struct gsc_driverdata *drv_data = gsc_get_drv_data(pdev); + struct device *dev = &pdev->dev; + int ret = 0; + + gsc = devm_kzalloc(dev, sizeof(struct gsc_dev), GFP_KERNEL); + if (!gsc) + return -ENOMEM; + + if (dev->of_node) + gsc->id = of_alias_get_id(pdev->dev.of_node, "gsc"); + else + gsc->id = pdev->id; + + if (gsc->id < 0 || gsc->id >= drv_data->num_entities) { + dev_err(dev, "Invalid platform device id: %d\n", gsc->id); + return -EINVAL; + } + + gsc->variant = drv_data->variant[gsc->id]; + gsc->pdev = pdev; + gsc->pdata = dev->platform_data; + + init_waitqueue_head(&gsc->irq_queue); + spin_lock_init(&gsc->slock); + mutex_init(&gsc->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gsc->regs = devm_request_and_ioremap(dev, res); + if (!gsc->regs) { + dev_err(dev, "failed to map registers\n"); + return -ENOENT; + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(dev, "failed to get IRQ resource\n"); + return -ENXIO; + } + + ret = gsc_clk_get(gsc); + if (ret) + return ret; + + ret = devm_request_irq(dev, res->start, gsc_irq_handler, + 0, pdev->name, gsc); + if (ret) { + dev_err(dev, "failed to install irq (%d)\n", ret); + goto err_clk; + } + + ret = gsc_register_m2m_device(gsc); + if (ret) + goto err_clk; + + platform_set_drvdata(pdev, gsc); + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) + goto err_m2m; + + /* Initialize continious memory allocator */ + gsc->alloc_ctx = vb2_dma_contig_init_ctx(dev); + if (IS_ERR(gsc->alloc_ctx)) { + ret = PTR_ERR(gsc->alloc_ctx); + goto err_pm; + } + + dev_dbg(dev, "gsc-%d registered successfully\n", gsc->id); + + pm_runtime_put(dev); + return 0; +err_pm: + pm_runtime_put(dev); +err_m2m: + gsc_unregister_m2m_device(gsc); +err_clk: + gsc_clk_put(gsc); + return ret; +} + +static int __devexit gsc_remove(struct platform_device *pdev) +{ + struct gsc_dev *gsc = platform_get_drvdata(pdev); + + gsc_unregister_m2m_device(gsc); + + vb2_dma_contig_cleanup_ctx(gsc->alloc_ctx); + pm_runtime_disable(&pdev->dev); + + dev_dbg(&pdev->dev, "%s driver unloaded\n", pdev->name); + return 0; +} + +static int gsc_runtime_resume(struct device *dev) +{ + struct gsc_dev *gsc = dev_get_drvdata(dev); + int ret = 0; + + pr_debug("gsc%d: state: 0x%lx", gsc->id, gsc->state); + + ret = clk_enable(gsc->clock); + if (ret) + return ret; + + gsc_hw_set_sw_reset(gsc); + gsc_wait_reset(gsc); + + return gsc_m2m_resume(gsc); +} + +static int gsc_runtime_suspend(struct device *dev) +{ + struct gsc_dev *gsc = dev_get_drvdata(dev); + int ret = 0; + + ret = gsc_m2m_suspend(gsc); + if (!ret) + clk_disable(gsc->clock); + + pr_debug("gsc%d: state: 0x%lx", gsc->id, gsc->state); + return ret; +} + +static int gsc_resume(struct device *dev) +{ + struct gsc_dev *gsc = dev_get_drvdata(dev); + unsigned long flags; + + pr_debug("gsc%d: state: 0x%lx", gsc->id, gsc->state); + + /* Do not resume if the device was idle before system suspend */ + spin_lock_irqsave(&gsc->slock, flags); + if (!test_and_clear_bit(ST_SUSPEND, &gsc->state) || + !gsc_m2m_active(gsc)) { + spin_unlock_irqrestore(&gsc->slock, flags); + return 0; + } + gsc_hw_set_sw_reset(gsc); + gsc_wait_reset(gsc); + + spin_unlock_irqrestore(&gsc->slock, flags); + + return gsc_m2m_resume(gsc); +} + +static int gsc_suspend(struct device *dev) +{ + struct gsc_dev *gsc = dev_get_drvdata(dev); + + pr_debug("gsc%d: state: 0x%lx", gsc->id, gsc->state); + + if (test_and_set_bit(ST_SUSPEND, &gsc->state)) + return 0; + + return gsc_m2m_suspend(gsc); +} + +static const struct dev_pm_ops gsc_pm_ops = { + .suspend = gsc_suspend, + .resume = gsc_resume, + .runtime_suspend = gsc_runtime_suspend, + .runtime_resume = gsc_runtime_resume, +}; + +static struct platform_driver gsc_driver = { + .probe = gsc_probe, + .remove = __devexit_p(gsc_remove), + .id_table = gsc_driver_ids, + .driver = { + .name = GSC_MODULE_NAME, + .owner = THIS_MODULE, + .pm = &gsc_pm_ops, + .of_match_table = exynos_gsc_match, + } +}; + +module_platform_driver(gsc_driver); + +MODULE_AUTHOR("Hyunwong Kim "); +MODULE_DESCRIPTION("Samsung EXYNOS5 Soc series G-Scaler driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/exynos-gsc/gsc-core.h b/drivers/media/platform/exynos-gsc/gsc-core.h new file mode 100644 index 0000000000000000000000000000000000000000..5f157efd24f0fcc36f0bf72f7bf8fdf1b4a362c0 --- /dev/null +++ b/drivers/media/platform/exynos-gsc/gsc-core.h @@ -0,0 +1,527 @@ +/* + * Copyright (c) 2011 - 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * header file for Samsung EXYNOS5 SoC series G-Scaler driver + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef GSC_CORE_H_ +#define GSC_CORE_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "gsc-regs.h" + +#define CONFIG_VB2_GSC_DMA_CONTIG 1 +#define GSC_MODULE_NAME "exynos-gsc" + +#define GSC_SHUTDOWN_TIMEOUT ((100*HZ)/1000) +#define GSC_MAX_DEVS 4 +#define GSC_M2M_BUF_NUM 0 +#define GSC_MAX_CTRL_NUM 10 +#define GSC_SC_ALIGN_4 4 +#define GSC_SC_ALIGN_2 2 +#define DEFAULT_CSC_EQ 1 +#define DEFAULT_CSC_RANGE 1 + +#define GSC_PARAMS (1 << 0) +#define GSC_SRC_FMT (1 << 1) +#define GSC_DST_FMT (1 << 2) +#define GSC_CTX_M2M (1 << 3) +#define GSC_CTX_STOP_REQ (1 << 6) + +enum gsc_dev_flags { + /* for global */ + ST_SUSPEND, + + /* for m2m node */ + ST_M2M_OPEN, + ST_M2M_RUN, + ST_M2M_PEND, + ST_M2M_SUSPENDED, + ST_M2M_SUSPENDING, +}; + +enum gsc_irq { + GSC_IRQ_DONE, + GSC_IRQ_OVERRUN +}; + +/** + * enum gsc_datapath - the path of data used for G-Scaler + * @GSC_CAMERA: from camera + * @GSC_DMA: from/to DMA + * @GSC_LOCAL: to local path + * @GSC_WRITEBACK: from FIMD + */ +enum gsc_datapath { + GSC_CAMERA = 0x1, + GSC_DMA, + GSC_MIXER, + GSC_FIMD, + GSC_WRITEBACK, +}; + +enum gsc_color_fmt { + GSC_RGB = 0x1, + GSC_YUV420 = 0x2, + GSC_YUV422 = 0x4, + GSC_YUV444 = 0x8, +}; + +enum gsc_yuv_fmt { + GSC_LSB_Y = 0x10, + GSC_LSB_C, + GSC_CBCR = 0x20, + GSC_CRCB, +}; + +#define fh_to_ctx(__fh) container_of(__fh, struct gsc_ctx, fh) +#define is_rgb(x) (!!((x) & 0x1)) +#define is_yuv420(x) (!!((x) & 0x2)) +#define is_yuv422(x) (!!((x) & 0x4)) + +#define gsc_m2m_active(dev) test_bit(ST_M2M_RUN, &(dev)->state) +#define gsc_m2m_pending(dev) test_bit(ST_M2M_PEND, &(dev)->state) +#define gsc_m2m_opened(dev) test_bit(ST_M2M_OPEN, &(dev)->state) + +#define ctrl_to_ctx(__ctrl) \ + container_of((__ctrl)->handler, struct gsc_ctx, ctrl_handler) +/** + * struct gsc_fmt - the driver's internal color format data + * @mbus_code: Media Bus pixel code, -1 if not applicable + * @name: format description + * @pixelformat: the fourcc code for this format, 0 if not applicable + * @yorder: Y/C order + * @corder: Chrominance order control + * @num_planes: number of physically non-contiguous data planes + * @nr_comp: number of physically contiguous data planes + * @depth: per plane driver's private 'number of bits per pixel' + * @flags: flags indicating which operation mode format applies to + */ +struct gsc_fmt { + enum v4l2_mbus_pixelcode mbus_code; + char *name; + u32 pixelformat; + u32 color; + u32 yorder; + u32 corder; + u16 num_planes; + u16 num_comp; + u8 depth[VIDEO_MAX_PLANES]; + u32 flags; +}; + +/** + * struct gsc_input_buf - the driver's video buffer + * @vb: videobuf2 buffer + * @list : linked list structure for buffer queue + * @idx : index of G-Scaler input buffer + */ +struct gsc_input_buf { + struct vb2_buffer vb; + struct list_head list; + int idx; +}; + +/** + * struct gsc_addr - the G-Scaler physical address set + * @y: luminance plane address + * @cb: Cb plane address + * @cr: Cr plane address + */ +struct gsc_addr { + dma_addr_t y; + dma_addr_t cb; + dma_addr_t cr; +}; + +/* struct gsc_ctrls - the G-Scaler control set + * @rotate: rotation degree + * @hflip: horizontal flip + * @vflip: vertical flip + * @global_alpha: the alpha value of current frame + */ +struct gsc_ctrls { + struct v4l2_ctrl *rotate; + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + struct v4l2_ctrl *global_alpha; +}; + +/** + * struct gsc_scaler - the configuration data for G-Scaler inetrnal scaler + * @pre_shfactor: pre sclaer shift factor + * @pre_hratio: horizontal ratio of the prescaler + * @pre_vratio: vertical ratio of the prescaler + * @main_hratio: the main scaler's horizontal ratio + * @main_vratio: the main scaler's vertical ratio + */ +struct gsc_scaler { + u32 pre_shfactor; + u32 pre_hratio; + u32 pre_vratio; + u32 main_hratio; + u32 main_vratio; +}; + +struct gsc_dev; + +struct gsc_ctx; + +/** + * struct gsc_frame - source/target frame properties + * @f_width: SRC : SRCIMG_WIDTH, DST : OUTPUTDMA_WHOLE_IMG_WIDTH + * @f_height: SRC : SRCIMG_HEIGHT, DST : OUTPUTDMA_WHOLE_IMG_HEIGHT + * @crop: cropped(source)/scaled(destination) size + * @payload: image size in bytes (w x h x bpp) + * @addr: image frame buffer physical addresses + * @fmt: G-Scaler color format pointer + * @colorspace: value indicating v4l2_colorspace + * @alpha: frame's alpha value + */ +struct gsc_frame { + u32 f_width; + u32 f_height; + struct v4l2_rect crop; + unsigned long payload[VIDEO_MAX_PLANES]; + struct gsc_addr addr; + const struct gsc_fmt *fmt; + u32 colorspace; + u8 alpha; +}; + +/** + * struct gsc_m2m_device - v4l2 memory-to-memory device data + * @vfd: the video device node for v4l2 m2m mode + * @m2m_dev: v4l2 memory-to-memory device data + * @ctx: hardware context data + * @refcnt: the reference counter + */ +struct gsc_m2m_device { + struct video_device *vfd; + struct v4l2_m2m_dev *m2m_dev; + struct gsc_ctx *ctx; + int refcnt; +}; + +/** + * struct gsc_pix_max - image pixel size limits in various IP configurations + * + * @org_scaler_bypass_w: max pixel width when the scaler is disabled + * @org_scaler_bypass_h: max pixel height when the scaler is disabled + * @org_scaler_input_w: max pixel width when the scaler is enabled + * @org_scaler_input_h: max pixel height when the scaler is enabled + * @real_rot_dis_w: max pixel src cropped height with the rotator is off + * @real_rot_dis_h: max pixel src croppped width with the rotator is off + * @real_rot_en_w: max pixel src cropped width with the rotator is on + * @real_rot_en_h: max pixel src cropped height with the rotator is on + * @target_rot_dis_w: max pixel dst scaled width with the rotator is off + * @target_rot_dis_h: max pixel dst scaled height with the rotator is off + * @target_rot_en_w: max pixel dst scaled width with the rotator is on + * @target_rot_en_h: max pixel dst scaled height with the rotator is on + */ +struct gsc_pix_max { + u16 org_scaler_bypass_w; + u16 org_scaler_bypass_h; + u16 org_scaler_input_w; + u16 org_scaler_input_h; + u16 real_rot_dis_w; + u16 real_rot_dis_h; + u16 real_rot_en_w; + u16 real_rot_en_h; + u16 target_rot_dis_w; + u16 target_rot_dis_h; + u16 target_rot_en_w; + u16 target_rot_en_h; +}; + +/** + * struct gsc_pix_min - image pixel size limits in various IP configurations + * + * @org_w: minimum source pixel width + * @org_h: minimum source pixel height + * @real_w: minimum input crop pixel width + * @real_h: minimum input crop pixel height + * @target_rot_dis_w: minimum output scaled pixel height when rotator is off + * @target_rot_dis_h: minimum output scaled pixel height when rotator is off + * @target_rot_en_w: minimum output scaled pixel height when rotator is on + * @target_rot_en_h: minimum output scaled pixel height when rotator is on + */ +struct gsc_pix_min { + u16 org_w; + u16 org_h; + u16 real_w; + u16 real_h; + u16 target_rot_dis_w; + u16 target_rot_dis_h; + u16 target_rot_en_w; + u16 target_rot_en_h; +}; + +struct gsc_pix_align { + u16 org_h; + u16 org_w; + u16 offset_h; + u16 real_w; + u16 real_h; + u16 target_w; + u16 target_h; +}; + +/** + * struct gsc_variant - G-Scaler variant information + */ +struct gsc_variant { + struct gsc_pix_max *pix_max; + struct gsc_pix_min *pix_min; + struct gsc_pix_align *pix_align; + u16 in_buf_cnt; + u16 out_buf_cnt; + u16 sc_up_max; + u16 sc_down_max; + u16 poly_sc_down_max; + u16 pre_sc_down_max; + u16 local_sc_down; +}; + +/** + * struct gsc_driverdata - per device type driver data for init time. + * + * @variant: the variant information for this driver. + * @lclk_frequency: G-Scaler clock frequency + * @num_entities: the number of g-scalers + */ +struct gsc_driverdata { + struct gsc_variant *variant[GSC_MAX_DEVS]; + unsigned long lclk_frequency; + int num_entities; +}; + +/** + * struct gsc_dev - abstraction for G-Scaler entity + * @slock: the spinlock protecting this data structure + * @lock: the mutex protecting this data structure + * @pdev: pointer to the G-Scaler platform device + * @variant: the IP variant information + * @id: G-Scaler device index (0..GSC_MAX_DEVS) + * @clock: clocks required for G-Scaler operation + * @regs: the mapped hardware registers + * @irq_queue: interrupt handler waitqueue + * @m2m: memory-to-memory V4L2 device information + * @state: flags used to synchronize m2m and capture mode operation + * @alloc_ctx: videobuf2 memory allocator context + * @vdev: video device for G-Scaler instance + */ +struct gsc_dev { + spinlock_t slock; + struct mutex lock; + struct platform_device *pdev; + struct gsc_variant *variant; + u16 id; + struct clk *clock; + void __iomem *regs; + wait_queue_head_t irq_queue; + struct gsc_m2m_device m2m; + struct exynos_platform_gscaler *pdata; + unsigned long state; + struct vb2_alloc_ctx *alloc_ctx; + struct video_device vdev; +}; + +/** + * gsc_ctx - the device context data + * @s_frame: source frame properties + * @d_frame: destination frame properties + * @in_path: input mode (DMA or camera) + * @out_path: output mode (DMA or FIFO) + * @scaler: image scaler properties + * @flags: additional flags for image conversion + * @state: flags to keep track of user configuration + * @gsc_dev: the G-Scaler device this context applies to + * @m2m_ctx: memory-to-memory device context + * @fh: v4l2 file handle + * @ctrl_handler: v4l2 controls handler + * @gsc_ctrls G-Scaler control set + * @ctrls_rdy: true if the control handler is initialized + */ +struct gsc_ctx { + struct gsc_frame s_frame; + struct gsc_frame d_frame; + enum gsc_datapath in_path; + enum gsc_datapath out_path; + struct gsc_scaler scaler; + u32 flags; + u32 state; + int rotation; + unsigned int hflip:1; + unsigned int vflip:1; + struct gsc_dev *gsc_dev; + struct v4l2_m2m_ctx *m2m_ctx; + struct v4l2_fh fh; + struct v4l2_ctrl_handler ctrl_handler; + struct gsc_ctrls gsc_ctrls; + bool ctrls_rdy; +}; + +void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm); +int gsc_register_m2m_device(struct gsc_dev *gsc); +void gsc_unregister_m2m_device(struct gsc_dev *gsc); +void gsc_m2m_job_finish(struct gsc_ctx *ctx, int vb_state); + +u32 get_plane_size(struct gsc_frame *fr, unsigned int plane); +const struct gsc_fmt *get_format(int index); +const struct gsc_fmt *find_fmt(u32 *pixelformat, u32 *mbus_code, u32 index); +int gsc_enum_fmt_mplane(struct v4l2_fmtdesc *f); +int gsc_try_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f); +void gsc_set_frame_size(struct gsc_frame *frame, int width, int height); +int gsc_g_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f); +void gsc_check_crop_change(u32 tmp_w, u32 tmp_h, u32 *w, u32 *h); +int gsc_g_crop(struct gsc_ctx *ctx, struct v4l2_crop *cr); +int gsc_try_crop(struct gsc_ctx *ctx, struct v4l2_crop *cr); +int gsc_cal_prescaler_ratio(struct gsc_variant *var, u32 src, u32 dst, + u32 *ratio); +void gsc_get_prescaler_shfactor(u32 hratio, u32 vratio, u32 *sh); +void gsc_check_src_scale_info(struct gsc_variant *var, + struct gsc_frame *s_frame, + u32 *wratio, u32 tx, u32 ty, u32 *hratio); +int gsc_check_scaler_ratio(struct gsc_variant *var, int sw, int sh, int dw, + int dh, int rot, int out_path); +int gsc_set_scaler_info(struct gsc_ctx *ctx); +int gsc_ctrls_create(struct gsc_ctx *ctx); +void gsc_ctrls_delete(struct gsc_ctx *ctx); +int gsc_prepare_addr(struct gsc_ctx *ctx, struct vb2_buffer *vb, + struct gsc_frame *frame, struct gsc_addr *addr); + +static inline void gsc_ctx_state_lock_set(u32 state, struct gsc_ctx *ctx) +{ + unsigned long flags; + + spin_lock_irqsave(&ctx->gsc_dev->slock, flags); + ctx->state |= state; + spin_unlock_irqrestore(&ctx->gsc_dev->slock, flags); +} + +static inline void gsc_ctx_state_lock_clear(u32 state, struct gsc_ctx *ctx) +{ + unsigned long flags; + + spin_lock_irqsave(&ctx->gsc_dev->slock, flags); + ctx->state &= ~state; + spin_unlock_irqrestore(&ctx->gsc_dev->slock, flags); +} + +static inline void gsc_hw_enable_control(struct gsc_dev *dev, bool on) +{ + u32 cfg = readl(dev->regs + GSC_ENABLE); + + if (on) + cfg |= GSC_ENABLE_ON; + else + cfg &= ~GSC_ENABLE_ON; + + writel(cfg, dev->regs + GSC_ENABLE); +} + +static inline int gsc_hw_get_irq_status(struct gsc_dev *dev) +{ + u32 cfg = readl(dev->regs + GSC_IRQ); + if (cfg & GSC_IRQ_STATUS_OR_IRQ) + return GSC_IRQ_OVERRUN; + else + return GSC_IRQ_DONE; + +} + +static inline void gsc_hw_clear_irq(struct gsc_dev *dev, int irq) +{ + u32 cfg = readl(dev->regs + GSC_IRQ); + if (irq == GSC_IRQ_OVERRUN) + cfg |= GSC_IRQ_STATUS_OR_IRQ; + else if (irq == GSC_IRQ_DONE) + cfg |= GSC_IRQ_STATUS_FRM_DONE_IRQ; + writel(cfg, dev->regs + GSC_IRQ); +} + +static inline void gsc_lock(struct vb2_queue *vq) +{ + struct gsc_ctx *ctx = vb2_get_drv_priv(vq); + mutex_lock(&ctx->gsc_dev->lock); +} + +static inline void gsc_unlock(struct vb2_queue *vq) +{ + struct gsc_ctx *ctx = vb2_get_drv_priv(vq); + mutex_unlock(&ctx->gsc_dev->lock); +} + +static inline bool gsc_ctx_state_is_set(u32 mask, struct gsc_ctx *ctx) +{ + unsigned long flags; + bool ret; + + spin_lock_irqsave(&ctx->gsc_dev->slock, flags); + ret = (ctx->state & mask) == mask; + spin_unlock_irqrestore(&ctx->gsc_dev->slock, flags); + return ret; +} + +static inline struct gsc_frame *ctx_get_frame(struct gsc_ctx *ctx, + enum v4l2_buf_type type) +{ + struct gsc_frame *frame; + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE == type) { + frame = &ctx->s_frame; + } else if (V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE == type) { + frame = &ctx->d_frame; + } else { + pr_err("Wrong buffer/video queue type (%d)", type); + return ERR_PTR(-EINVAL); + } + + return frame; +} + +void gsc_hw_set_sw_reset(struct gsc_dev *dev); +int gsc_wait_reset(struct gsc_dev *dev); + +void gsc_hw_set_frm_done_irq_mask(struct gsc_dev *dev, bool mask); +void gsc_hw_set_gsc_irq_enable(struct gsc_dev *dev, bool mask); +void gsc_hw_set_input_buf_masking(struct gsc_dev *dev, u32 shift, bool enable); +void gsc_hw_set_output_buf_masking(struct gsc_dev *dev, u32 shift, bool enable); +void gsc_hw_set_input_addr(struct gsc_dev *dev, struct gsc_addr *addr, + int index); +void gsc_hw_set_output_addr(struct gsc_dev *dev, struct gsc_addr *addr, + int index); +void gsc_hw_set_input_path(struct gsc_ctx *ctx); +void gsc_hw_set_in_size(struct gsc_ctx *ctx); +void gsc_hw_set_in_image_rgb(struct gsc_ctx *ctx); +void gsc_hw_set_in_image_format(struct gsc_ctx *ctx); +void gsc_hw_set_output_path(struct gsc_ctx *ctx); +void gsc_hw_set_out_size(struct gsc_ctx *ctx); +void gsc_hw_set_out_image_rgb(struct gsc_ctx *ctx); +void gsc_hw_set_out_image_format(struct gsc_ctx *ctx); +void gsc_hw_set_prescaler(struct gsc_ctx *ctx); +void gsc_hw_set_mainscaler(struct gsc_ctx *ctx); +void gsc_hw_set_rotation(struct gsc_ctx *ctx); +void gsc_hw_set_global_alpha(struct gsc_ctx *ctx); +void gsc_hw_set_sfr_update(struct gsc_ctx *ctx); + +#endif /* GSC_CORE_H_ */ diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c new file mode 100644 index 0000000000000000000000000000000000000000..3c7f00577bd9fbbe5ed9d78369eb6d965a10d1b4 --- /dev/null +++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c @@ -0,0 +1,770 @@ +/* + * Copyright (c) 2011 - 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung EXYNOS5 SoC series G-Scaler driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation, either version 2 of the License, + * or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "gsc-core.h" + +static int gsc_m2m_ctx_stop_req(struct gsc_ctx *ctx) +{ + struct gsc_ctx *curr_ctx; + struct gsc_dev *gsc = ctx->gsc_dev; + int ret; + + curr_ctx = v4l2_m2m_get_curr_priv(gsc->m2m.m2m_dev); + if (!gsc_m2m_pending(gsc) || (curr_ctx != ctx)) + return 0; + + gsc_ctx_state_lock_set(GSC_CTX_STOP_REQ, ctx); + ret = wait_event_timeout(gsc->irq_queue, + !gsc_ctx_state_is_set(GSC_CTX_STOP_REQ, ctx), + GSC_SHUTDOWN_TIMEOUT); + + return ret == 0 ? -ETIMEDOUT : ret; +} + +static int gsc_m2m_start_streaming(struct vb2_queue *q, unsigned int count) +{ + struct gsc_ctx *ctx = q->drv_priv; + int ret; + + ret = pm_runtime_get_sync(&ctx->gsc_dev->pdev->dev); + return ret > 0 ? 0 : ret; +} + +static int gsc_m2m_stop_streaming(struct vb2_queue *q) +{ + struct gsc_ctx *ctx = q->drv_priv; + int ret; + + ret = gsc_m2m_ctx_stop_req(ctx); + if (ret == -ETIMEDOUT) + gsc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); + + pm_runtime_put(&ctx->gsc_dev->pdev->dev); + + return 0; +} + +void gsc_m2m_job_finish(struct gsc_ctx *ctx, int vb_state) +{ + struct vb2_buffer *src_vb, *dst_vb; + + if (!ctx || !ctx->m2m_ctx) + return; + + src_vb = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + dst_vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); + + if (src_vb && dst_vb) { + v4l2_m2m_buf_done(src_vb, vb_state); + v4l2_m2m_buf_done(dst_vb, vb_state); + + v4l2_m2m_job_finish(ctx->gsc_dev->m2m.m2m_dev, + ctx->m2m_ctx); + } +} + + +static void gsc_m2m_job_abort(void *priv) +{ + struct gsc_ctx *ctx = priv; + int ret; + + ret = gsc_m2m_ctx_stop_req(ctx); + if (ret == -ETIMEDOUT) + gsc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); +} + +static int gsc_fill_addr(struct gsc_ctx *ctx) +{ + struct gsc_frame *s_frame, *d_frame; + struct vb2_buffer *vb = NULL; + int ret; + + s_frame = &ctx->s_frame; + d_frame = &ctx->d_frame; + + vb = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + ret = gsc_prepare_addr(ctx, vb, s_frame, &s_frame->addr); + if (ret) + return ret; + + vb = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + return gsc_prepare_addr(ctx, vb, d_frame, &d_frame->addr); +} + +static void gsc_m2m_device_run(void *priv) +{ + struct gsc_ctx *ctx = priv; + struct gsc_dev *gsc; + unsigned long flags; + u32 ret; + bool is_set = false; + + if (WARN(!ctx, "null hardware context\n")) + return; + + gsc = ctx->gsc_dev; + spin_lock_irqsave(&gsc->slock, flags); + + set_bit(ST_M2M_PEND, &gsc->state); + + /* Reconfigure hardware if the context has changed. */ + if (gsc->m2m.ctx != ctx) { + pr_debug("gsc->m2m.ctx = 0x%p, current_ctx = 0x%p", + gsc->m2m.ctx, ctx); + ctx->state |= GSC_PARAMS; + gsc->m2m.ctx = ctx; + } + + is_set = (ctx->state & GSC_CTX_STOP_REQ) ? 1 : 0; + ctx->state &= ~GSC_CTX_STOP_REQ; + if (is_set) { + wake_up(&gsc->irq_queue); + goto put_device; + } + + ret = gsc_fill_addr(ctx); + if (ret) { + pr_err("Wrong address"); + goto put_device; + } + + gsc_set_prefbuf(gsc, &ctx->s_frame); + gsc_hw_set_input_addr(gsc, &ctx->s_frame.addr, GSC_M2M_BUF_NUM); + gsc_hw_set_output_addr(gsc, &ctx->d_frame.addr, GSC_M2M_BUF_NUM); + + if (ctx->state & GSC_PARAMS) { + gsc_hw_set_input_buf_masking(gsc, GSC_M2M_BUF_NUM, false); + gsc_hw_set_output_buf_masking(gsc, GSC_M2M_BUF_NUM, false); + gsc_hw_set_frm_done_irq_mask(gsc, false); + gsc_hw_set_gsc_irq_enable(gsc, true); + + if (gsc_set_scaler_info(ctx)) { + pr_err("Scaler setup error"); + goto put_device; + } + + gsc_hw_set_input_path(ctx); + gsc_hw_set_in_size(ctx); + gsc_hw_set_in_image_format(ctx); + + gsc_hw_set_output_path(ctx); + gsc_hw_set_out_size(ctx); + gsc_hw_set_out_image_format(ctx); + + gsc_hw_set_prescaler(ctx); + gsc_hw_set_mainscaler(ctx); + gsc_hw_set_rotation(ctx); + gsc_hw_set_global_alpha(ctx); + } + + /* update shadow registers */ + gsc_hw_set_sfr_update(ctx); + + ctx->state &= ~GSC_PARAMS; + gsc_hw_enable_control(gsc, true); + + spin_unlock_irqrestore(&gsc->slock, flags); + return; + +put_device: + ctx->state &= ~GSC_PARAMS; + spin_unlock_irqrestore(&gsc->slock, flags); +} + +static int gsc_m2m_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *num_buffers, unsigned int *num_planes, + unsigned int sizes[], void *allocators[]) +{ + struct gsc_ctx *ctx = vb2_get_drv_priv(vq); + struct gsc_frame *frame; + int i; + + frame = ctx_get_frame(ctx, vq->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + if (!frame->fmt) + return -EINVAL; + + *num_planes = frame->fmt->num_planes; + for (i = 0; i < frame->fmt->num_planes; i++) { + sizes[i] = frame->payload[i]; + allocators[i] = ctx->gsc_dev->alloc_ctx; + } + return 0; +} + +static int gsc_m2m_buf_prepare(struct vb2_buffer *vb) +{ + struct gsc_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct gsc_frame *frame; + int i; + + frame = ctx_get_frame(ctx, vb->vb2_queue->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + if (!V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) { + for (i = 0; i < frame->fmt->num_planes; i++) + vb2_set_plane_payload(vb, i, frame->payload[i]); + } + + return 0; +} + +static void gsc_m2m_buf_queue(struct vb2_buffer *vb) +{ + struct gsc_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + + pr_debug("ctx: %p, ctx->state: 0x%x", ctx, ctx->state); + + if (ctx->m2m_ctx) + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} + +static struct vb2_ops gsc_m2m_qops = { + .queue_setup = gsc_m2m_queue_setup, + .buf_prepare = gsc_m2m_buf_prepare, + .buf_queue = gsc_m2m_buf_queue, + .wait_prepare = gsc_unlock, + .wait_finish = gsc_lock, + .stop_streaming = gsc_m2m_stop_streaming, + .start_streaming = gsc_m2m_start_streaming, +}; + +static int gsc_m2m_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + struct gsc_dev *gsc = ctx->gsc_dev; + + strlcpy(cap->driver, gsc->pdev->name, sizeof(cap->driver)); + strlcpy(cap->card, gsc->pdev->name, sizeof(cap->card)); + strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info)); + cap->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_M2M_MPLANE | + V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_VIDEO_OUTPUT_MPLANE; + + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int gsc_m2m_enum_fmt_mplane(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return gsc_enum_fmt_mplane(f); +} + +static int gsc_m2m_g_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + + return gsc_g_fmt_mplane(ctx, f); +} + +static int gsc_m2m_try_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + + return gsc_try_fmt_mplane(ctx, f); +} + +static int gsc_m2m_s_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + struct vb2_queue *vq; + struct gsc_frame *frame; + struct v4l2_pix_format_mplane *pix; + int i, ret = 0; + + ret = gsc_m2m_try_fmt_mplane(file, fh, f); + if (ret) + return ret; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + + if (vb2_is_streaming(vq)) { + pr_err("queue (%d) busy", f->type); + return -EBUSY; + } + + if (V4L2_TYPE_IS_OUTPUT(f->type)) + frame = &ctx->s_frame; + else + frame = &ctx->d_frame; + + pix = &f->fmt.pix_mp; + frame->fmt = find_fmt(&pix->pixelformat, NULL, 0); + frame->colorspace = pix->colorspace; + if (!frame->fmt) + return -EINVAL; + + for (i = 0; i < frame->fmt->num_planes; i++) + frame->payload[i] = pix->plane_fmt[i].sizeimage; + + gsc_set_frame_size(frame, pix->width, pix->height); + + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + gsc_ctx_state_lock_set(GSC_PARAMS | GSC_DST_FMT, ctx); + else + gsc_ctx_state_lock_set(GSC_PARAMS | GSC_SRC_FMT, ctx); + + pr_debug("f_w: %d, f_h: %d", frame->f_width, frame->f_height); + + return 0; +} + +static int gsc_m2m_reqbufs(struct file *file, void *fh, + struct v4l2_requestbuffers *reqbufs) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + struct gsc_dev *gsc = ctx->gsc_dev; + struct gsc_frame *frame; + u32 max_cnt; + + max_cnt = (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) ? + gsc->variant->in_buf_cnt : gsc->variant->out_buf_cnt; + if (reqbufs->count > max_cnt) { + return -EINVAL; + } else if (reqbufs->count == 0) { + if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + gsc_ctx_state_lock_clear(GSC_SRC_FMT, ctx); + else + gsc_ctx_state_lock_clear(GSC_DST_FMT, ctx); + } + + frame = ctx_get_frame(ctx, reqbufs->type); + + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int gsc_m2m_querybuf(struct file *file, void *fh, + struct v4l2_buffer *buf) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); +} + +static int gsc_m2m_qbuf(struct file *file, void *fh, + struct v4l2_buffer *buf) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int gsc_m2m_dqbuf(struct file *file, void *fh, + struct v4l2_buffer *buf) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + +static int gsc_m2m_streamon(struct file *file, void *fh, + enum v4l2_buf_type type) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + + /* The source and target color format need to be set */ + if (V4L2_TYPE_IS_OUTPUT(type)) { + if (!gsc_ctx_state_is_set(GSC_SRC_FMT, ctx)) + return -EINVAL; + } else if (!gsc_ctx_state_is_set(GSC_DST_FMT, ctx)) { + return -EINVAL; + } + + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static int gsc_m2m_streamoff(struct file *file, void *fh, + enum v4l2_buf_type type) +{ + struct gsc_ctx *ctx = fh_to_ctx(fh); + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); +} + +/* Return 1 if rectangle a is enclosed in rectangle b, or 0 otherwise. */ +static int is_rectangle_enclosed(struct v4l2_rect *a, struct v4l2_rect *b) +{ + if (a->left < b->left || a->top < b->top) + return 0; + + if (a->left + a->width > b->left + b->width) + return 0; + + if (a->top + a->height > b->top + b->height) + return 0; + + return 1; +} + +static int gsc_m2m_g_selection(struct file *file, void *fh, + struct v4l2_selection *s) +{ + struct gsc_frame *frame; + struct gsc_ctx *ctx = fh_to_ctx(fh); + + if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) && + (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)) + return -EINVAL; + + frame = ctx_get_frame(ctx, s->type); + if (IS_ERR(frame)) + return PTR_ERR(frame); + + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + s->r.left = 0; + s->r.top = 0; + s->r.width = frame->f_width; + s->r.height = frame->f_height; + return 0; + + case V4L2_SEL_TGT_COMPOSE: + case V4L2_SEL_TGT_CROP: + s->r.left = frame->crop.left; + s->r.top = frame->crop.top; + s->r.width = frame->crop.width; + s->r.height = frame->crop.height; + return 0; + } + + return -EINVAL; +} + +static int gsc_m2m_s_selection(struct file *file, void *fh, + struct v4l2_selection *s) +{ + struct gsc_frame *frame; + struct gsc_ctx *ctx = fh_to_ctx(fh); + struct v4l2_crop cr; + struct gsc_variant *variant = ctx->gsc_dev->variant; + int ret; + + cr.type = s->type; + cr.c = s->r; + + if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) && + (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)) + return -EINVAL; + + ret = gsc_try_crop(ctx, &cr); + if (ret) + return ret; + + if (s->flags & V4L2_SEL_FLAG_LE && + !is_rectangle_enclosed(&cr.c, &s->r)) + return -ERANGE; + + if (s->flags & V4L2_SEL_FLAG_GE && + !is_rectangle_enclosed(&s->r, &cr.c)) + return -ERANGE; + + s->r = cr.c; + + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + case V4L2_SEL_TGT_COMPOSE: + frame = &ctx->s_frame; + break; + + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP: + case V4L2_SEL_TGT_CROP_DEFAULT: + frame = &ctx->d_frame; + break; + + default: + return -EINVAL; + } + + /* Check to see if scaling ratio is within supported range */ + if (gsc_ctx_state_is_set(GSC_DST_FMT | GSC_SRC_FMT, ctx)) { + if (s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + ret = gsc_check_scaler_ratio(variant, cr.c.width, + cr.c.height, ctx->d_frame.crop.width, + ctx->d_frame.crop.height, + ctx->gsc_ctrls.rotate->val, ctx->out_path); + } else { + ret = gsc_check_scaler_ratio(variant, + ctx->s_frame.crop.width, + ctx->s_frame.crop.height, cr.c.width, + cr.c.height, ctx->gsc_ctrls.rotate->val, + ctx->out_path); + } + + if (ret) { + pr_err("Out of scaler range"); + return -EINVAL; + } + } + + frame->crop = cr.c; + + gsc_ctx_state_lock_set(GSC_PARAMS, ctx); + return 0; +} + +static const struct v4l2_ioctl_ops gsc_m2m_ioctl_ops = { + .vidioc_querycap = gsc_m2m_querycap, + .vidioc_enum_fmt_vid_cap_mplane = gsc_m2m_enum_fmt_mplane, + .vidioc_enum_fmt_vid_out_mplane = gsc_m2m_enum_fmt_mplane, + .vidioc_g_fmt_vid_cap_mplane = gsc_m2m_g_fmt_mplane, + .vidioc_g_fmt_vid_out_mplane = gsc_m2m_g_fmt_mplane, + .vidioc_try_fmt_vid_cap_mplane = gsc_m2m_try_fmt_mplane, + .vidioc_try_fmt_vid_out_mplane = gsc_m2m_try_fmt_mplane, + .vidioc_s_fmt_vid_cap_mplane = gsc_m2m_s_fmt_mplane, + .vidioc_s_fmt_vid_out_mplane = gsc_m2m_s_fmt_mplane, + .vidioc_reqbufs = gsc_m2m_reqbufs, + .vidioc_querybuf = gsc_m2m_querybuf, + .vidioc_qbuf = gsc_m2m_qbuf, + .vidioc_dqbuf = gsc_m2m_dqbuf, + .vidioc_streamon = gsc_m2m_streamon, + .vidioc_streamoff = gsc_m2m_streamoff, + .vidioc_g_selection = gsc_m2m_g_selection, + .vidioc_s_selection = gsc_m2m_s_selection +}; + +static int queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct gsc_ctx *ctx = priv; + int ret; + + memset(src_vq, 0, sizeof(*src_vq)); + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + src_vq->io_modes = VB2_MMAP | VB2_USERPTR; + src_vq->drv_priv = ctx; + src_vq->ops = &gsc_m2m_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + memset(dst_vq, 0, sizeof(*dst_vq)); + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR; + dst_vq->drv_priv = ctx; + dst_vq->ops = &gsc_m2m_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + + return vb2_queue_init(dst_vq); +} + +static int gsc_m2m_open(struct file *file) +{ + struct gsc_dev *gsc = video_drvdata(file); + struct gsc_ctx *ctx = NULL; + int ret; + + pr_debug("pid: %d, state: 0x%lx", task_pid_nr(current), gsc->state); + + if (mutex_lock_interruptible(&gsc->lock)) + return -ERESTARTSYS; + + ctx = kzalloc(sizeof (*ctx), GFP_KERNEL); + if (!ctx) { + ret = -ENOMEM; + goto unlock; + } + + v4l2_fh_init(&ctx->fh, gsc->m2m.vfd); + ret = gsc_ctrls_create(ctx); + if (ret) + goto error_fh; + + /* Use separate control handler per file handle */ + ctx->fh.ctrl_handler = &ctx->ctrl_handler; + file->private_data = &ctx->fh; + v4l2_fh_add(&ctx->fh); + + ctx->gsc_dev = gsc; + /* Default color format */ + ctx->s_frame.fmt = get_format(0); + ctx->d_frame.fmt = get_format(0); + /* Setup the device context for mem2mem mode. */ + ctx->state = GSC_CTX_M2M; + ctx->flags = 0; + ctx->in_path = GSC_DMA; + ctx->out_path = GSC_DMA; + + ctx->m2m_ctx = v4l2_m2m_ctx_init(gsc->m2m.m2m_dev, ctx, queue_init); + if (IS_ERR(ctx->m2m_ctx)) { + pr_err("Failed to initialize m2m context"); + ret = PTR_ERR(ctx->m2m_ctx); + goto error_ctrls; + } + + if (gsc->m2m.refcnt++ == 0) + set_bit(ST_M2M_OPEN, &gsc->state); + + pr_debug("gsc m2m driver is opened, ctx(0x%p)", ctx); + + mutex_unlock(&gsc->lock); + return 0; + +error_ctrls: + gsc_ctrls_delete(ctx); +error_fh: + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); +unlock: + mutex_unlock(&gsc->lock); + return ret; +} + +static int gsc_m2m_release(struct file *file) +{ + struct gsc_ctx *ctx = fh_to_ctx(file->private_data); + struct gsc_dev *gsc = ctx->gsc_dev; + + pr_debug("pid: %d, state: 0x%lx, refcnt= %d", + task_pid_nr(current), gsc->state, gsc->m2m.refcnt); + + if (mutex_lock_interruptible(&gsc->lock)) + return -ERESTARTSYS; + + v4l2_m2m_ctx_release(ctx->m2m_ctx); + gsc_ctrls_delete(ctx); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + + if (--gsc->m2m.refcnt <= 0) + clear_bit(ST_M2M_OPEN, &gsc->state); + kfree(ctx); + + mutex_unlock(&gsc->lock); + return 0; +} + +static unsigned int gsc_m2m_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct gsc_ctx *ctx = fh_to_ctx(file->private_data); + struct gsc_dev *gsc = ctx->gsc_dev; + int ret; + + if (mutex_lock_interruptible(&gsc->lock)) + return -ERESTARTSYS; + + ret = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + mutex_unlock(&gsc->lock); + + return ret; +} + +static int gsc_m2m_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct gsc_ctx *ctx = fh_to_ctx(file->private_data); + struct gsc_dev *gsc = ctx->gsc_dev; + int ret; + + if (mutex_lock_interruptible(&gsc->lock)) + return -ERESTARTSYS; + + ret = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + mutex_unlock(&gsc->lock); + + return ret; +} + +static const struct v4l2_file_operations gsc_m2m_fops = { + .owner = THIS_MODULE, + .open = gsc_m2m_open, + .release = gsc_m2m_release, + .poll = gsc_m2m_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = gsc_m2m_mmap, +}; + +static struct v4l2_m2m_ops gsc_m2m_ops = { + .device_run = gsc_m2m_device_run, + .job_abort = gsc_m2m_job_abort, +}; + +int gsc_register_m2m_device(struct gsc_dev *gsc) +{ + struct platform_device *pdev; + int ret; + + if (!gsc) + return -ENODEV; + + pdev = gsc->pdev; + + gsc->vdev.fops = &gsc_m2m_fops; + gsc->vdev.ioctl_ops = &gsc_m2m_ioctl_ops; + gsc->vdev.release = video_device_release_empty; + gsc->vdev.lock = &gsc->lock; + snprintf(gsc->vdev.name, sizeof(gsc->vdev.name), "%s.%d:m2m", + GSC_MODULE_NAME, gsc->id); + + video_set_drvdata(&gsc->vdev, gsc); + + gsc->m2m.vfd = &gsc->vdev; + gsc->m2m.m2m_dev = v4l2_m2m_init(&gsc_m2m_ops); + if (IS_ERR(gsc->m2m.m2m_dev)) { + dev_err(&pdev->dev, "failed to initialize v4l2-m2m device\n"); + ret = PTR_ERR(gsc->m2m.m2m_dev); + goto err_m2m_r1; + } + + ret = video_register_device(&gsc->vdev, VFL_TYPE_GRABBER, -1); + if (ret) { + dev_err(&pdev->dev, + "%s(): failed to register video device\n", __func__); + goto err_m2m_r2; + } + + pr_debug("gsc m2m driver registered as /dev/video%d", gsc->vdev.num); + return 0; + +err_m2m_r2: + v4l2_m2m_release(gsc->m2m.m2m_dev); +err_m2m_r1: + video_device_release(gsc->m2m.vfd); + + return ret; +} + +void gsc_unregister_m2m_device(struct gsc_dev *gsc) +{ + if (gsc) + v4l2_m2m_release(gsc->m2m.m2m_dev); +} diff --git a/drivers/media/platform/exynos-gsc/gsc-regs.c b/drivers/media/platform/exynos-gsc/gsc-regs.c new file mode 100644 index 0000000000000000000000000000000000000000..0d8625f03a32f9099920586a47e5f82ae0384332 --- /dev/null +++ b/drivers/media/platform/exynos-gsc/gsc-regs.c @@ -0,0 +1,425 @@ +/* + * Copyright (c) 2011 - 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung EXYNOS5 SoC series G-Scaler driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation, either version 2 of the License, + * or (at your option) any later version. + */ + +#include +#include +#include + +#include "gsc-core.h" + +void gsc_hw_set_sw_reset(struct gsc_dev *dev) +{ + writel(GSC_SW_RESET_SRESET, dev->regs + GSC_SW_RESET); +} + +int gsc_wait_reset(struct gsc_dev *dev) +{ + unsigned long end = jiffies + msecs_to_jiffies(50); + u32 cfg; + + while (time_before(jiffies, end)) { + cfg = readl(dev->regs + GSC_SW_RESET); + if (!cfg) + return 0; + usleep_range(10, 20); + } + + return -EBUSY; +} + +void gsc_hw_set_frm_done_irq_mask(struct gsc_dev *dev, bool mask) +{ + u32 cfg; + + cfg = readl(dev->regs + GSC_IRQ); + if (mask) + cfg |= GSC_IRQ_FRMDONE_MASK; + else + cfg &= ~GSC_IRQ_FRMDONE_MASK; + writel(cfg, dev->regs + GSC_IRQ); +} + +void gsc_hw_set_gsc_irq_enable(struct gsc_dev *dev, bool mask) +{ + u32 cfg; + + cfg = readl(dev->regs + GSC_IRQ); + if (mask) + cfg |= GSC_IRQ_ENABLE; + else + cfg &= ~GSC_IRQ_ENABLE; + writel(cfg, dev->regs + GSC_IRQ); +} + +void gsc_hw_set_input_buf_masking(struct gsc_dev *dev, u32 shift, + bool enable) +{ + u32 cfg = readl(dev->regs + GSC_IN_BASE_ADDR_Y_MASK); + u32 mask = 1 << shift; + + cfg &= ~mask; + cfg |= enable << shift; + + writel(cfg, dev->regs + GSC_IN_BASE_ADDR_Y_MASK); + writel(cfg, dev->regs + GSC_IN_BASE_ADDR_CB_MASK); + writel(cfg, dev->regs + GSC_IN_BASE_ADDR_CR_MASK); +} + +void gsc_hw_set_output_buf_masking(struct gsc_dev *dev, u32 shift, + bool enable) +{ + u32 cfg = readl(dev->regs + GSC_OUT_BASE_ADDR_Y_MASK); + u32 mask = 1 << shift; + + cfg &= ~mask; + cfg |= enable << shift; + + writel(cfg, dev->regs + GSC_OUT_BASE_ADDR_Y_MASK); + writel(cfg, dev->regs + GSC_OUT_BASE_ADDR_CB_MASK); + writel(cfg, dev->regs + GSC_OUT_BASE_ADDR_CR_MASK); +} + +void gsc_hw_set_input_addr(struct gsc_dev *dev, struct gsc_addr *addr, + int index) +{ + pr_debug("src_buf[%d]: 0x%X, cb: 0x%X, cr: 0x%X", index, + addr->y, addr->cb, addr->cr); + writel(addr->y, dev->regs + GSC_IN_BASE_ADDR_Y(index)); + writel(addr->cb, dev->regs + GSC_IN_BASE_ADDR_CB(index)); + writel(addr->cr, dev->regs + GSC_IN_BASE_ADDR_CR(index)); + +} + +void gsc_hw_set_output_addr(struct gsc_dev *dev, + struct gsc_addr *addr, int index) +{ + pr_debug("dst_buf[%d]: 0x%X, cb: 0x%X, cr: 0x%X", + index, addr->y, addr->cb, addr->cr); + writel(addr->y, dev->regs + GSC_OUT_BASE_ADDR_Y(index)); + writel(addr->cb, dev->regs + GSC_OUT_BASE_ADDR_CB(index)); + writel(addr->cr, dev->regs + GSC_OUT_BASE_ADDR_CR(index)); +} + +void gsc_hw_set_input_path(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + + u32 cfg = readl(dev->regs + GSC_IN_CON); + cfg &= ~(GSC_IN_PATH_MASK | GSC_IN_LOCAL_SEL_MASK); + + if (ctx->in_path == GSC_DMA) + cfg |= GSC_IN_PATH_MEMORY; + + writel(cfg, dev->regs + GSC_IN_CON); +} + +void gsc_hw_set_in_size(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->s_frame; + u32 cfg; + + /* Set input pixel offset */ + cfg = GSC_SRCIMG_OFFSET_X(frame->crop.left); + cfg |= GSC_SRCIMG_OFFSET_Y(frame->crop.top); + writel(cfg, dev->regs + GSC_SRCIMG_OFFSET); + + /* Set input original size */ + cfg = GSC_SRCIMG_WIDTH(frame->f_width); + cfg |= GSC_SRCIMG_HEIGHT(frame->f_height); + writel(cfg, dev->regs + GSC_SRCIMG_SIZE); + + /* Set input cropped size */ + cfg = GSC_CROPPED_WIDTH(frame->crop.width); + cfg |= GSC_CROPPED_HEIGHT(frame->crop.height); + writel(cfg, dev->regs + GSC_CROPPED_SIZE); +} + +void gsc_hw_set_in_image_rgb(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->s_frame; + u32 cfg; + + cfg = readl(dev->regs + GSC_IN_CON); + if (frame->colorspace == V4L2_COLORSPACE_REC709) + cfg |= GSC_IN_RGB_HD_WIDE; + else + cfg |= GSC_IN_RGB_SD_WIDE; + + if (frame->fmt->pixelformat == V4L2_PIX_FMT_RGB565X) + cfg |= GSC_IN_RGB565; + else if (frame->fmt->pixelformat == V4L2_PIX_FMT_RGB32) + cfg |= GSC_IN_XRGB8888; + + writel(cfg, dev->regs + GSC_IN_CON); +} + +void gsc_hw_set_in_image_format(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->s_frame; + u32 i, depth = 0; + u32 cfg; + + cfg = readl(dev->regs + GSC_IN_CON); + cfg &= ~(GSC_IN_RGB_TYPE_MASK | GSC_IN_YUV422_1P_ORDER_MASK | + GSC_IN_CHROMA_ORDER_MASK | GSC_IN_FORMAT_MASK | + GSC_IN_TILE_TYPE_MASK | GSC_IN_TILE_MODE); + writel(cfg, dev->regs + GSC_IN_CON); + + if (is_rgb(frame->fmt->color)) { + gsc_hw_set_in_image_rgb(ctx); + return; + } + for (i = 0; i < frame->fmt->num_planes; i++) + depth += frame->fmt->depth[i]; + + switch (frame->fmt->num_comp) { + case 1: + cfg |= GSC_IN_YUV422_1P; + if (frame->fmt->yorder == GSC_LSB_Y) + cfg |= GSC_IN_YUV422_1P_ORDER_LSB_Y; + else + cfg |= GSC_IN_YUV422_1P_OEDER_LSB_C; + if (frame->fmt->corder == GSC_CBCR) + cfg |= GSC_IN_CHROMA_ORDER_CBCR; + else + cfg |= GSC_IN_CHROMA_ORDER_CRCB; + break; + case 2: + if (depth == 12) + cfg |= GSC_IN_YUV420_2P; + else + cfg |= GSC_IN_YUV422_2P; + if (frame->fmt->corder == GSC_CBCR) + cfg |= GSC_IN_CHROMA_ORDER_CBCR; + else + cfg |= GSC_IN_CHROMA_ORDER_CRCB; + break; + case 3: + if (depth == 12) + cfg |= GSC_IN_YUV420_3P; + else + cfg |= GSC_IN_YUV422_3P; + break; + }; + + writel(cfg, dev->regs + GSC_IN_CON); +} + +void gsc_hw_set_output_path(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + + u32 cfg = readl(dev->regs + GSC_OUT_CON); + cfg &= ~GSC_OUT_PATH_MASK; + + if (ctx->out_path == GSC_DMA) + cfg |= GSC_OUT_PATH_MEMORY; + else + cfg |= GSC_OUT_PATH_LOCAL; + + writel(cfg, dev->regs + GSC_OUT_CON); +} + +void gsc_hw_set_out_size(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->d_frame; + u32 cfg; + + /* Set output original size */ + if (ctx->out_path == GSC_DMA) { + cfg = GSC_DSTIMG_OFFSET_X(frame->crop.left); + cfg |= GSC_DSTIMG_OFFSET_Y(frame->crop.top); + writel(cfg, dev->regs + GSC_DSTIMG_OFFSET); + + cfg = GSC_DSTIMG_WIDTH(frame->f_width); + cfg |= GSC_DSTIMG_HEIGHT(frame->f_height); + writel(cfg, dev->regs + GSC_DSTIMG_SIZE); + } + + /* Set output scaled size */ + if (ctx->gsc_ctrls.rotate->val == 90 || + ctx->gsc_ctrls.rotate->val == 270) { + cfg = GSC_SCALED_WIDTH(frame->crop.height); + cfg |= GSC_SCALED_HEIGHT(frame->crop.width); + } else { + cfg = GSC_SCALED_WIDTH(frame->crop.width); + cfg |= GSC_SCALED_HEIGHT(frame->crop.height); + } + writel(cfg, dev->regs + GSC_SCALED_SIZE); +} + +void gsc_hw_set_out_image_rgb(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->d_frame; + u32 cfg; + + cfg = readl(dev->regs + GSC_OUT_CON); + if (frame->colorspace == V4L2_COLORSPACE_REC709) + cfg |= GSC_OUT_RGB_HD_WIDE; + else + cfg |= GSC_OUT_RGB_SD_WIDE; + + if (frame->fmt->pixelformat == V4L2_PIX_FMT_RGB565X) + cfg |= GSC_OUT_RGB565; + else if (frame->fmt->pixelformat == V4L2_PIX_FMT_RGB32) + cfg |= GSC_OUT_XRGB8888; + + writel(cfg, dev->regs + GSC_OUT_CON); +} + +void gsc_hw_set_out_image_format(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->d_frame; + u32 i, depth = 0; + u32 cfg; + + cfg = readl(dev->regs + GSC_OUT_CON); + cfg &= ~(GSC_OUT_RGB_TYPE_MASK | GSC_OUT_YUV422_1P_ORDER_MASK | + GSC_OUT_CHROMA_ORDER_MASK | GSC_OUT_FORMAT_MASK | + GSC_OUT_TILE_TYPE_MASK | GSC_OUT_TILE_MODE); + writel(cfg, dev->regs + GSC_OUT_CON); + + if (is_rgb(frame->fmt->color)) { + gsc_hw_set_out_image_rgb(ctx); + return; + } + + if (ctx->out_path != GSC_DMA) { + cfg |= GSC_OUT_YUV444; + goto end_set; + } + + for (i = 0; i < frame->fmt->num_planes; i++) + depth += frame->fmt->depth[i]; + + switch (frame->fmt->num_comp) { + case 1: + cfg |= GSC_OUT_YUV422_1P; + if (frame->fmt->yorder == GSC_LSB_Y) + cfg |= GSC_OUT_YUV422_1P_ORDER_LSB_Y; + else + cfg |= GSC_OUT_YUV422_1P_OEDER_LSB_C; + if (frame->fmt->corder == GSC_CBCR) + cfg |= GSC_OUT_CHROMA_ORDER_CBCR; + else + cfg |= GSC_OUT_CHROMA_ORDER_CRCB; + break; + case 2: + if (depth == 12) + cfg |= GSC_OUT_YUV420_2P; + else + cfg |= GSC_OUT_YUV422_2P; + if (frame->fmt->corder == GSC_CBCR) + cfg |= GSC_OUT_CHROMA_ORDER_CBCR; + else + cfg |= GSC_OUT_CHROMA_ORDER_CRCB; + break; + case 3: + cfg |= GSC_OUT_YUV420_3P; + break; + }; + +end_set: + writel(cfg, dev->regs + GSC_OUT_CON); +} + +void gsc_hw_set_prescaler(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_scaler *sc = &ctx->scaler; + u32 cfg; + + cfg = GSC_PRESC_SHFACTOR(sc->pre_shfactor); + cfg |= GSC_PRESC_H_RATIO(sc->pre_hratio); + cfg |= GSC_PRESC_V_RATIO(sc->pre_vratio); + writel(cfg, dev->regs + GSC_PRE_SCALE_RATIO); +} + +void gsc_hw_set_mainscaler(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_scaler *sc = &ctx->scaler; + u32 cfg; + + cfg = GSC_MAIN_H_RATIO_VALUE(sc->main_hratio); + writel(cfg, dev->regs + GSC_MAIN_H_RATIO); + + cfg = GSC_MAIN_V_RATIO_VALUE(sc->main_vratio); + writel(cfg, dev->regs + GSC_MAIN_V_RATIO); +} + +void gsc_hw_set_rotation(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + u32 cfg; + + cfg = readl(dev->regs + GSC_IN_CON); + cfg &= ~GSC_IN_ROT_MASK; + + switch (ctx->gsc_ctrls.rotate->val) { + case 270: + cfg |= GSC_IN_ROT_270; + break; + case 180: + cfg |= GSC_IN_ROT_180; + break; + case 90: + if (ctx->gsc_ctrls.hflip->val) + cfg |= GSC_IN_ROT_90_XFLIP; + else if (ctx->gsc_ctrls.vflip->val) + cfg |= GSC_IN_ROT_90_YFLIP; + else + cfg |= GSC_IN_ROT_90; + break; + case 0: + if (ctx->gsc_ctrls.hflip->val) + cfg |= GSC_IN_ROT_XFLIP; + else if (ctx->gsc_ctrls.vflip->val) + cfg |= GSC_IN_ROT_YFLIP; + } + + writel(cfg, dev->regs + GSC_IN_CON); +} + +void gsc_hw_set_global_alpha(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + struct gsc_frame *frame = &ctx->d_frame; + u32 cfg; + + if (!is_rgb(frame->fmt->color)) { + pr_debug("Not a RGB format"); + return; + } + + cfg = readl(dev->regs + GSC_OUT_CON); + cfg &= ~GSC_OUT_GLOBAL_ALPHA_MASK; + + cfg |= GSC_OUT_GLOBAL_ALPHA(ctx->gsc_ctrls.global_alpha->val); + writel(cfg, dev->regs + GSC_OUT_CON); +} + +void gsc_hw_set_sfr_update(struct gsc_ctx *ctx) +{ + struct gsc_dev *dev = ctx->gsc_dev; + u32 cfg; + + cfg = readl(dev->regs + GSC_ENABLE); + cfg |= GSC_ENABLE_SFR_UPDATE; + writel(cfg, dev->regs + GSC_ENABLE); +} diff --git a/drivers/media/platform/exynos-gsc/gsc-regs.h b/drivers/media/platform/exynos-gsc/gsc-regs.h new file mode 100644 index 0000000000000000000000000000000000000000..533e9947a925db5a2eec166fbcd25dca0a1392b8 --- /dev/null +++ b/drivers/media/platform/exynos-gsc/gsc-regs.h @@ -0,0 +1,172 @@ +/* + * Copyright (c) 2011 - 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Register definition file for Samsung G-Scaler driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef REGS_GSC_H_ +#define REGS_GSC_H_ + +/* G-Scaler enable */ +#define GSC_ENABLE 0x00 +#define GSC_ENABLE_OP_STATUS (1 << 2) +#define GSC_ENABLE_SFR_UPDATE (1 << 1) +#define GSC_ENABLE_ON (1 << 0) + +/* G-Scaler S/W reset */ +#define GSC_SW_RESET 0x04 +#define GSC_SW_RESET_SRESET (1 << 0) + +/* G-Scaler IRQ */ +#define GSC_IRQ 0x08 +#define GSC_IRQ_STATUS_OR_IRQ (1 << 17) +#define GSC_IRQ_STATUS_FRM_DONE_IRQ (1 << 16) +#define GSC_IRQ_FRMDONE_MASK (1 << 1) +#define GSC_IRQ_ENABLE (1 << 0) + +/* G-Scaler input control */ +#define GSC_IN_CON 0x10 +#define GSC_IN_ROT_MASK (7 << 16) +#define GSC_IN_ROT_270 (7 << 16) +#define GSC_IN_ROT_90_YFLIP (6 << 16) +#define GSC_IN_ROT_90_XFLIP (5 << 16) +#define GSC_IN_ROT_90 (4 << 16) +#define GSC_IN_ROT_180 (3 << 16) +#define GSC_IN_ROT_YFLIP (2 << 16) +#define GSC_IN_ROT_XFLIP (1 << 16) +#define GSC_IN_RGB_TYPE_MASK (3 << 14) +#define GSC_IN_RGB_HD_WIDE (3 << 14) +#define GSC_IN_RGB_HD_NARROW (2 << 14) +#define GSC_IN_RGB_SD_WIDE (1 << 14) +#define GSC_IN_RGB_SD_NARROW (0 << 14) +#define GSC_IN_YUV422_1P_ORDER_MASK (1 << 13) +#define GSC_IN_YUV422_1P_ORDER_LSB_Y (0 << 13) +#define GSC_IN_YUV422_1P_OEDER_LSB_C (1 << 13) +#define GSC_IN_CHROMA_ORDER_MASK (1 << 12) +#define GSC_IN_CHROMA_ORDER_CBCR (0 << 12) +#define GSC_IN_CHROMA_ORDER_CRCB (1 << 12) +#define GSC_IN_FORMAT_MASK (7 << 8) +#define GSC_IN_XRGB8888 (0 << 8) +#define GSC_IN_RGB565 (1 << 8) +#define GSC_IN_YUV420_2P (2 << 8) +#define GSC_IN_YUV420_3P (3 << 8) +#define GSC_IN_YUV422_1P (4 << 8) +#define GSC_IN_YUV422_2P (5 << 8) +#define GSC_IN_YUV422_3P (6 << 8) +#define GSC_IN_TILE_TYPE_MASK (1 << 4) +#define GSC_IN_TILE_C_16x8 (0 << 4) +#define GSC_IN_TILE_MODE (1 << 3) +#define GSC_IN_LOCAL_SEL_MASK (3 << 1) +#define GSC_IN_PATH_MASK (1 << 0) +#define GSC_IN_PATH_MEMORY (0 << 0) + +/* G-Scaler source image size */ +#define GSC_SRCIMG_SIZE 0x14 +#define GSC_SRCIMG_HEIGHT(x) ((x) << 16) +#define GSC_SRCIMG_WIDTH(x) ((x) << 0) + +/* G-Scaler source image offset */ +#define GSC_SRCIMG_OFFSET 0x18 +#define GSC_SRCIMG_OFFSET_Y(x) ((x) << 16) +#define GSC_SRCIMG_OFFSET_X(x) ((x) << 0) + +/* G-Scaler cropped source image size */ +#define GSC_CROPPED_SIZE 0x1c +#define GSC_CROPPED_HEIGHT(x) ((x) << 16) +#define GSC_CROPPED_WIDTH(x) ((x) << 0) + +/* G-Scaler output control */ +#define GSC_OUT_CON 0x20 +#define GSC_OUT_GLOBAL_ALPHA_MASK (0xff << 24) +#define GSC_OUT_GLOBAL_ALPHA(x) ((x) << 24) +#define GSC_OUT_RGB_TYPE_MASK (3 << 10) +#define GSC_OUT_RGB_HD_NARROW (3 << 10) +#define GSC_OUT_RGB_HD_WIDE (2 << 10) +#define GSC_OUT_RGB_SD_NARROW (1 << 10) +#define GSC_OUT_RGB_SD_WIDE (0 << 10) +#define GSC_OUT_YUV422_1P_ORDER_MASK (1 << 9) +#define GSC_OUT_YUV422_1P_ORDER_LSB_Y (0 << 9) +#define GSC_OUT_YUV422_1P_OEDER_LSB_C (1 << 9) +#define GSC_OUT_CHROMA_ORDER_MASK (1 << 8) +#define GSC_OUT_CHROMA_ORDER_CBCR (0 << 8) +#define GSC_OUT_CHROMA_ORDER_CRCB (1 << 8) +#define GSC_OUT_FORMAT_MASK (7 << 4) +#define GSC_OUT_XRGB8888 (0 << 4) +#define GSC_OUT_RGB565 (1 << 4) +#define GSC_OUT_YUV420_2P (2 << 4) +#define GSC_OUT_YUV420_3P (3 << 4) +#define GSC_OUT_YUV422_1P (4 << 4) +#define GSC_OUT_YUV422_2P (5 << 4) +#define GSC_OUT_YUV444 (7 << 4) +#define GSC_OUT_TILE_TYPE_MASK (1 << 2) +#define GSC_OUT_TILE_C_16x8 (0 << 2) +#define GSC_OUT_TILE_MODE (1 << 1) +#define GSC_OUT_PATH_MASK (1 << 0) +#define GSC_OUT_PATH_LOCAL (1 << 0) +#define GSC_OUT_PATH_MEMORY (0 << 0) + +/* G-Scaler scaled destination image size */ +#define GSC_SCALED_SIZE 0x24 +#define GSC_SCALED_HEIGHT(x) ((x) << 16) +#define GSC_SCALED_WIDTH(x) ((x) << 0) + +/* G-Scaler pre scale ratio */ +#define GSC_PRE_SCALE_RATIO 0x28 +#define GSC_PRESC_SHFACTOR(x) ((x) << 28) +#define GSC_PRESC_V_RATIO(x) ((x) << 16) +#define GSC_PRESC_H_RATIO(x) ((x) << 0) + +/* G-Scaler main scale horizontal ratio */ +#define GSC_MAIN_H_RATIO 0x2c +#define GSC_MAIN_H_RATIO_VALUE(x) ((x) << 0) + +/* G-Scaler main scale vertical ratio */ +#define GSC_MAIN_V_RATIO 0x30 +#define GSC_MAIN_V_RATIO_VALUE(x) ((x) << 0) + +/* G-Scaler destination image size */ +#define GSC_DSTIMG_SIZE 0x40 +#define GSC_DSTIMG_HEIGHT(x) ((x) << 16) +#define GSC_DSTIMG_WIDTH(x) ((x) << 0) + +/* G-Scaler destination image offset */ +#define GSC_DSTIMG_OFFSET 0x44 +#define GSC_DSTIMG_OFFSET_Y(x) ((x) << 16) +#define GSC_DSTIMG_OFFSET_X(x) ((x) << 0) + +/* G-Scaler input y address mask */ +#define GSC_IN_BASE_ADDR_Y_MASK 0x4c +/* G-Scaler input y base address */ +#define GSC_IN_BASE_ADDR_Y(n) (0x50 + (n) * 0x4) + +/* G-Scaler input cb address mask */ +#define GSC_IN_BASE_ADDR_CB_MASK 0x7c +/* G-Scaler input cb base address */ +#define GSC_IN_BASE_ADDR_CB(n) (0x80 + (n) * 0x4) + +/* G-Scaler input cr address mask */ +#define GSC_IN_BASE_ADDR_CR_MASK 0xac +/* G-Scaler input cr base address */ +#define GSC_IN_BASE_ADDR_CR(n) (0xb0 + (n) * 0x4) + +/* G-Scaler output y address mask */ +#define GSC_OUT_BASE_ADDR_Y_MASK 0x10c +/* G-Scaler output y base address */ +#define GSC_OUT_BASE_ADDR_Y(n) (0x110 + (n) * 0x4) + +/* G-Scaler output cb address mask */ +#define GSC_OUT_BASE_ADDR_CB_MASK 0x15c +/* G-Scaler output cb base address */ +#define GSC_OUT_BASE_ADDR_CB(n) (0x160 + (n) * 0x4) + +/* G-Scaler output cr address mask */ +#define GSC_OUT_BASE_ADDR_CR_MASK 0x1ac +/* G-Scaler output cr base address */ +#define GSC_OUT_BASE_ADDR_CR(n) (0x1b0 + (n) * 0x4) + +#endif /* REGS_GSC_H_ */ diff --git a/drivers/media/video/fsl-viu.c b/drivers/media/platform/fsl-viu.c similarity index 98% rename from drivers/media/video/fsl-viu.c rename to drivers/media/platform/fsl-viu.c index 777486f7cadb65761e25d393e1c16f043426eaea..897250b886474c0c950e23b0279e9f5e22343329 100644 --- a/drivers/media/video/fsl-viu.c +++ b/drivers/media/platform/fsl-viu.c @@ -860,7 +860,7 @@ int vidioc_g_fbuf(struct file *file, void *priv, struct v4l2_framebuffer *arg) return 0; } -int vidioc_s_fbuf(struct file *file, void *priv, struct v4l2_framebuffer *arg) +int vidioc_s_fbuf(struct file *file, void *priv, const struct v4l2_framebuffer *arg) { struct viu_fh *fh = priv; struct viu_dev *dev = fh->dev; @@ -1279,10 +1279,16 @@ static int viu_open(struct file *file) dprintk(1, "open minor=%d type=%s users=%d\n", minor, v4l2_type_names[V4L2_BUF_TYPE_VIDEO_CAPTURE], dev->users); + if (mutex_lock_interruptible(&dev->lock)) { + dev->users--; + return -ERESTARTSYS; + } + /* allocate and initialize per filehandle data */ fh = kzalloc(sizeof(*fh), GFP_KERNEL); if (!fh) { dev->users--; + mutex_unlock(&dev->lock); return -ENOMEM; } @@ -1325,6 +1331,7 @@ static int viu_open(struct file *file) fh->type, V4L2_FIELD_INTERLACED, sizeof(struct viu_buf), fh, &fh->dev->lock); + mutex_unlock(&dev->lock); return 0; } @@ -1340,9 +1347,12 @@ static ssize_t viu_read(struct file *file, char __user *data, size_t count, dev->ovenable = 0; if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; viu_start_dma(dev); ret = videobuf_read_stream(&fh->vb_vidq, data, count, ppos, 0, file->f_flags & O_NONBLOCK); + mutex_unlock(&dev->lock); return ret; } return 0; @@ -1352,11 +1362,16 @@ static unsigned int viu_poll(struct file *file, struct poll_table_struct *wait) { struct viu_fh *fh = file->private_data; struct videobuf_queue *q = &fh->vb_vidq; + struct viu_dev *dev = fh->dev; + unsigned int res; if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) return POLLERR; - return videobuf_poll_stream(file, q, wait); + mutex_lock(&dev->lock); + res = videobuf_poll_stream(file, q, wait); + mutex_unlock(&dev->lock); + return res; } static int viu_release(struct file *file) @@ -1365,9 +1380,11 @@ static int viu_release(struct file *file) struct viu_dev *dev = fh->dev; int minor = video_devdata(file)->minor; + mutex_lock(&dev->lock); viu_stop_dma(dev); videobuf_stop(&fh->vb_vidq); videobuf_mmap_free(&fh->vb_vidq); + mutex_unlock(&dev->lock); kfree(fh); @@ -1394,11 +1411,15 @@ void viu_reset(struct viu_reg *reg) static int viu_mmap(struct file *file, struct vm_area_struct *vma) { struct viu_fh *fh = file->private_data; + struct viu_dev *dev = fh->dev; int ret; dprintk(1, "mmap called, vma=0x%08lx\n", (unsigned long)vma); + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; ret = videobuf_mmap_mapper(&fh->vb_vidq, vma); + mutex_unlock(&dev->lock); dprintk(1, "vma start=0x%08lx, size=%ld, ret=%d\n", (unsigned long)vma->vm_start, @@ -1544,10 +1565,6 @@ static int __devinit viu_of_probe(struct platform_device *op) /* initialize locks */ mutex_init(&viu_dev->lock); - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &viu_dev->vdev->flags); viu_dev->vdev->lock = &viu_dev->lock; spin_lock_init(&viu_dev->slock); diff --git a/drivers/media/video/indycam.c b/drivers/media/platform/indycam.c similarity index 100% rename from drivers/media/video/indycam.c rename to drivers/media/platform/indycam.c diff --git a/drivers/media/video/indycam.h b/drivers/media/platform/indycam.h similarity index 100% rename from drivers/media/video/indycam.h rename to drivers/media/platform/indycam.h diff --git a/drivers/media/platform/m2m-deinterlace.c b/drivers/media/platform/m2m-deinterlace.c new file mode 100644 index 0000000000000000000000000000000000000000..45164c4f8452975d2bbd12978b3c6d9ff8229118 --- /dev/null +++ b/drivers/media/platform/m2m-deinterlace.c @@ -0,0 +1,1124 @@ +/* + * V4L2 deinterlacing support. + * + * Copyright (c) 2012 Vista Silicon S.L. + * Javier Martin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define MEM2MEM_TEST_MODULE_NAME "mem2mem-deinterlace" + +MODULE_DESCRIPTION("mem2mem device which supports deinterlacing using dmaengine"); +MODULE_AUTHOR("Javier Martin v4l2_dev, "%s: " fmt, __func__, ## arg) + +struct deinterlace_fmt { + char *name; + u32 fourcc; + /* Types the format can be used for */ + u32 types; +}; + +static struct deinterlace_fmt formats[] = { + { + .name = "YUV 4:2:0 Planar", + .fourcc = V4L2_PIX_FMT_YUV420, + .types = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT, + }, + { + .name = "YUYV 4:2:2", + .fourcc = V4L2_PIX_FMT_YUYV, + .types = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT, + }, +}; + +#define NUM_FORMATS ARRAY_SIZE(formats) + +/* Per-queue, driver-specific private data */ +struct deinterlace_q_data { + unsigned int width; + unsigned int height; + unsigned int sizeimage; + struct deinterlace_fmt *fmt; + enum v4l2_field field; +}; + +enum { + V4L2_M2M_SRC = 0, + V4L2_M2M_DST = 1, +}; + +enum { + YUV420_DMA_Y_ODD, + YUV420_DMA_Y_EVEN, + YUV420_DMA_U_ODD, + YUV420_DMA_U_EVEN, + YUV420_DMA_V_ODD, + YUV420_DMA_V_EVEN, + YUV420_DMA_Y_ODD_DOUBLING, + YUV420_DMA_U_ODD_DOUBLING, + YUV420_DMA_V_ODD_DOUBLING, + YUYV_DMA_ODD, + YUYV_DMA_EVEN, + YUYV_DMA_EVEN_DOUBLING, +}; + +/* Source and destination queue data */ +static struct deinterlace_q_data q_data[2]; + +static struct deinterlace_q_data *get_q_data(enum v4l2_buf_type type) +{ + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + return &q_data[V4L2_M2M_SRC]; + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &q_data[V4L2_M2M_DST]; + default: + BUG(); + } + return NULL; +} + +static struct deinterlace_fmt *find_format(struct v4l2_format *f) +{ + struct deinterlace_fmt *fmt; + unsigned int k; + + for (k = 0; k < NUM_FORMATS; k++) { + fmt = &formats[k]; + if ((fmt->types & f->type) && + (fmt->fourcc == f->fmt.pix.pixelformat)) + break; + } + + if (k == NUM_FORMATS) + return NULL; + + return &formats[k]; +} + +struct deinterlace_dev { + struct v4l2_device v4l2_dev; + struct video_device *vfd; + + atomic_t busy; + struct mutex dev_mutex; + spinlock_t irqlock; + + struct dma_chan *dma_chan; + + struct v4l2_m2m_dev *m2m_dev; + struct vb2_alloc_ctx *alloc_ctx; +}; + +struct deinterlace_ctx { + struct deinterlace_dev *dev; + + /* Abort requested by m2m */ + int aborting; + enum v4l2_colorspace colorspace; + dma_cookie_t cookie; + struct v4l2_m2m_ctx *m2m_ctx; + struct dma_interleaved_template *xt; +}; + +/* + * mem2mem callbacks + */ +static int deinterlace_job_ready(void *priv) +{ + struct deinterlace_ctx *ctx = priv; + struct deinterlace_dev *pcdev = ctx->dev; + + if ((v4l2_m2m_num_src_bufs_ready(ctx->m2m_ctx) > 0) + && (v4l2_m2m_num_dst_bufs_ready(ctx->m2m_ctx) > 0) + && (atomic_read(&ctx->dev->busy) == 0)) { + dprintk(pcdev, "Task ready\n"); + return 1; + } + + dprintk(pcdev, "Task not ready to run\n"); + + return 0; +} + +static void deinterlace_job_abort(void *priv) +{ + struct deinterlace_ctx *ctx = priv; + struct deinterlace_dev *pcdev = ctx->dev; + + ctx->aborting = 1; + + dprintk(pcdev, "Aborting task\n"); + + v4l2_m2m_job_finish(pcdev->m2m_dev, ctx->m2m_ctx); +} + +static void deinterlace_lock(void *priv) +{ + struct deinterlace_ctx *ctx = priv; + struct deinterlace_dev *pcdev = ctx->dev; + mutex_lock(&pcdev->dev_mutex); +} + +static void deinterlace_unlock(void *priv) +{ + struct deinterlace_ctx *ctx = priv; + struct deinterlace_dev *pcdev = ctx->dev; + mutex_unlock(&pcdev->dev_mutex); +} + +static void dma_callback(void *data) +{ + struct deinterlace_ctx *curr_ctx = data; + struct deinterlace_dev *pcdev = curr_ctx->dev; + struct vb2_buffer *src_vb, *dst_vb; + + atomic_set(&pcdev->busy, 0); + + src_vb = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx); + dst_vb = v4l2_m2m_dst_buf_remove(curr_ctx->m2m_ctx); + + v4l2_m2m_buf_done(src_vb, VB2_BUF_STATE_DONE); + v4l2_m2m_buf_done(dst_vb, VB2_BUF_STATE_DONE); + + v4l2_m2m_job_finish(pcdev->m2m_dev, curr_ctx->m2m_ctx); + + dprintk(pcdev, "dma transfers completed.\n"); +} + +static void deinterlace_issue_dma(struct deinterlace_ctx *ctx, int op, + int do_callback) +{ + struct deinterlace_q_data *s_q_data, *d_q_data; + struct vb2_buffer *src_buf, *dst_buf; + struct deinterlace_dev *pcdev = ctx->dev; + struct dma_chan *chan = pcdev->dma_chan; + struct dma_device *dmadev = chan->device; + struct dma_async_tx_descriptor *tx; + unsigned int s_width, s_height; + unsigned int d_width, d_height; + unsigned int d_size, s_size; + dma_addr_t p_in, p_out; + enum dma_ctrl_flags flags; + + src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + + s_q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_OUTPUT); + s_width = s_q_data->width; + s_height = s_q_data->height; + s_size = s_width * s_height; + + d_q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_CAPTURE); + d_width = d_q_data->width; + d_height = d_q_data->height; + d_size = d_width * d_height; + + p_in = (dma_addr_t)vb2_dma_contig_plane_dma_addr(src_buf, 0); + p_out = (dma_addr_t)vb2_dma_contig_plane_dma_addr(dst_buf, 0); + if (!p_in || !p_out) { + v4l2_err(&pcdev->v4l2_dev, + "Acquiring kernel pointers to buffers failed\n"); + return; + } + + switch (op) { + case YUV420_DMA_Y_ODD: + ctx->xt->numf = s_height / 2; + ctx->xt->sgl[0].size = s_width; + ctx->xt->sgl[0].icg = s_width; + ctx->xt->src_start = p_in; + ctx->xt->dst_start = p_out; + break; + case YUV420_DMA_Y_EVEN: + ctx->xt->numf = s_height / 2; + ctx->xt->sgl[0].size = s_width; + ctx->xt->sgl[0].icg = s_width; + ctx->xt->src_start = p_in + s_size / 2; + ctx->xt->dst_start = p_out + s_width; + break; + case YUV420_DMA_U_ODD: + ctx->xt->numf = s_height / 4; + ctx->xt->sgl[0].size = s_width / 2; + ctx->xt->sgl[0].icg = s_width / 2; + ctx->xt->src_start = p_in + s_size; + ctx->xt->dst_start = p_out + s_size; + break; + case YUV420_DMA_U_EVEN: + ctx->xt->numf = s_height / 4; + ctx->xt->sgl[0].size = s_width / 2; + ctx->xt->sgl[0].icg = s_width / 2; + ctx->xt->src_start = p_in + (9 * s_size) / 8; + ctx->xt->dst_start = p_out + s_size + s_width / 2; + break; + case YUV420_DMA_V_ODD: + ctx->xt->numf = s_height / 4; + ctx->xt->sgl[0].size = s_width / 2; + ctx->xt->sgl[0].icg = s_width / 2; + ctx->xt->src_start = p_in + (5 * s_size) / 4; + ctx->xt->dst_start = p_out + (5 * s_size) / 4; + break; + case YUV420_DMA_V_EVEN: + ctx->xt->numf = s_height / 4; + ctx->xt->sgl[0].size = s_width / 2; + ctx->xt->sgl[0].icg = s_width / 2; + ctx->xt->src_start = p_in + (11 * s_size) / 8; + ctx->xt->dst_start = p_out + (5 * s_size) / 4 + s_width / 2; + break; + case YUV420_DMA_Y_ODD_DOUBLING: + ctx->xt->numf = s_height / 2; + ctx->xt->sgl[0].size = s_width; + ctx->xt->sgl[0].icg = s_width; + ctx->xt->src_start = p_in; + ctx->xt->dst_start = p_out + s_width; + break; + case YUV420_DMA_U_ODD_DOUBLING: + ctx->xt->numf = s_height / 4; + ctx->xt->sgl[0].size = s_width / 2; + ctx->xt->sgl[0].icg = s_width / 2; + ctx->xt->src_start = p_in + s_size; + ctx->xt->dst_start = p_out + s_size + s_width / 2; + break; + case YUV420_DMA_V_ODD_DOUBLING: + ctx->xt->numf = s_height / 4; + ctx->xt->sgl[0].size = s_width / 2; + ctx->xt->sgl[0].icg = s_width / 2; + ctx->xt->src_start = p_in + (5 * s_size) / 4; + ctx->xt->dst_start = p_out + (5 * s_size) / 4 + s_width / 2; + break; + case YUYV_DMA_ODD: + ctx->xt->numf = s_height / 2; + ctx->xt->sgl[0].size = s_width * 2; + ctx->xt->sgl[0].icg = s_width * 2; + ctx->xt->src_start = p_in; + ctx->xt->dst_start = p_out; + break; + case YUYV_DMA_EVEN: + ctx->xt->numf = s_height / 2; + ctx->xt->sgl[0].size = s_width * 2; + ctx->xt->sgl[0].icg = s_width * 2; + ctx->xt->src_start = p_in + s_size; + ctx->xt->dst_start = p_out + s_width * 2; + break; + case YUYV_DMA_EVEN_DOUBLING: + default: + ctx->xt->numf = s_height / 2; + ctx->xt->sgl[0].size = s_width * 2; + ctx->xt->sgl[0].icg = s_width * 2; + ctx->xt->src_start = p_in; + ctx->xt->dst_start = p_out + s_width * 2; + break; + } + + /* Common parameters for al transfers */ + ctx->xt->frame_size = 1; + ctx->xt->dir = DMA_MEM_TO_MEM; + ctx->xt->src_sgl = false; + ctx->xt->dst_sgl = true; + flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT | + DMA_COMPL_SKIP_DEST_UNMAP | DMA_COMPL_SKIP_SRC_UNMAP; + + tx = dmadev->device_prep_interleaved_dma(chan, ctx->xt, flags); + if (tx == NULL) { + v4l2_warn(&pcdev->v4l2_dev, "DMA interleaved prep error\n"); + return; + } + + if (do_callback) { + tx->callback = dma_callback; + tx->callback_param = ctx; + } + + ctx->cookie = dmaengine_submit(tx); + if (dma_submit_error(ctx->cookie)) { + v4l2_warn(&pcdev->v4l2_dev, + "DMA submit error %d with src=0x%x dst=0x%x len=0x%x\n", + ctx->cookie, (unsigned)p_in, (unsigned)p_out, + s_size * 3/2); + return; + } + + dma_async_issue_pending(chan); +} + +static void deinterlace_device_run(void *priv) +{ + struct deinterlace_ctx *ctx = priv; + struct deinterlace_q_data *dst_q_data; + + atomic_set(&ctx->dev->busy, 1); + + dprintk(ctx->dev, "%s: DMA try issue.\n", __func__); + + dst_q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_CAPTURE); + + /* + * 4 possible field conversions are possible at the moment: + * V4L2_FIELD_SEQ_TB --> V4L2_FIELD_INTERLACED_TB: + * two separate fields in the same input buffer are interlaced + * in the output buffer using weaving. Top field comes first. + * V4L2_FIELD_SEQ_TB --> V4L2_FIELD_NONE: + * top field from the input buffer is copied to the output buffer + * using line doubling. Bottom field from the input buffer is discarded. + * V4L2_FIELD_SEQ_BT --> V4L2_FIELD_INTERLACED_BT: + * two separate fields in the same input buffer are interlaced + * in the output buffer using weaving. Bottom field comes first. + * V4L2_FIELD_SEQ_BT --> V4L2_FIELD_NONE: + * bottom field from the input buffer is copied to the output buffer + * using line doubling. Top field from the input buffer is discarded. + */ + switch (dst_q_data->fmt->fourcc) { + case V4L2_PIX_FMT_YUV420: + switch (dst_q_data->field) { + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + dprintk(ctx->dev, "%s: yuv420 interlaced tb.\n", + __func__); + deinterlace_issue_dma(ctx, YUV420_DMA_Y_ODD, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_Y_EVEN, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_U_ODD, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_U_EVEN, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_V_ODD, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_V_EVEN, 1); + break; + case V4L2_FIELD_NONE: + default: + dprintk(ctx->dev, "%s: yuv420 interlaced line doubling.\n", + __func__); + deinterlace_issue_dma(ctx, YUV420_DMA_Y_ODD, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_Y_ODD_DOUBLING, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_U_ODD, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_U_ODD_DOUBLING, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_V_ODD, 0); + deinterlace_issue_dma(ctx, YUV420_DMA_V_ODD_DOUBLING, 1); + break; + } + break; + case V4L2_PIX_FMT_YUYV: + default: + switch (dst_q_data->field) { + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + dprintk(ctx->dev, "%s: yuyv interlaced_tb.\n", + __func__); + deinterlace_issue_dma(ctx, YUYV_DMA_ODD, 0); + deinterlace_issue_dma(ctx, YUYV_DMA_EVEN, 1); + break; + case V4L2_FIELD_NONE: + default: + dprintk(ctx->dev, "%s: yuyv interlaced line doubling.\n", + __func__); + deinterlace_issue_dma(ctx, YUYV_DMA_ODD, 0); + deinterlace_issue_dma(ctx, YUYV_DMA_EVEN_DOUBLING, 1); + break; + } + break; + } + + dprintk(ctx->dev, "%s: DMA issue done.\n", __func__); +} + +/* + * video ioctls + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strlcpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver)); + strlcpy(cap->card, MEM2MEM_NAME, sizeof(cap->card)); + strlcpy(cap->bus_info, MEM2MEM_NAME, sizeof(cap->card)); + /* + * This is only a mem-to-mem video device. The capture and output + * device capability flags are left only for backward compatibility + * and are scheduled for removal. + */ + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | + V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + + return 0; +} + +static int enum_fmt(struct v4l2_fmtdesc *f, u32 type) +{ + int i, num; + struct deinterlace_fmt *fmt; + + num = 0; + + for (i = 0; i < NUM_FORMATS; ++i) { + if (formats[i].types & type) { + /* index-th format of type type found ? */ + if (num == f->index) + break; + /* Correct type but haven't reached our index yet, + * just increment per-type index */ + ++num; + } + } + + if (i < NUM_FORMATS) { + /* Format found */ + fmt = &formats[i]; + strlcpy(f->description, fmt->name, sizeof(f->description)); + f->pixelformat = fmt->fourcc; + return 0; + } + + /* Format not found */ + return -EINVAL; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(f, MEM2MEM_CAPTURE); +} + +static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(f, MEM2MEM_OUTPUT); +} + +static int vidioc_g_fmt(struct deinterlace_ctx *ctx, struct v4l2_format *f) +{ + struct vb2_queue *vq; + struct deinterlace_q_data *q_data; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(f->type); + + f->fmt.pix.width = q_data->width; + f->fmt.pix.height = q_data->height; + f->fmt.pix.field = q_data->field; + f->fmt.pix.pixelformat = q_data->fmt->fourcc; + + switch (q_data->fmt->fourcc) { + case V4L2_PIX_FMT_YUV420: + f->fmt.pix.bytesperline = q_data->width * 3 / 2; + break; + case V4L2_PIX_FMT_YUYV: + default: + f->fmt.pix.bytesperline = q_data->width * 2; + } + + f->fmt.pix.sizeimage = q_data->sizeimage; + f->fmt.pix.colorspace = ctx->colorspace; + + return 0; +} + +static int vidioc_g_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + return vidioc_g_fmt(priv, f); +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + return vidioc_g_fmt(priv, f); +} + +static int vidioc_try_fmt(struct v4l2_format *f, struct deinterlace_fmt *fmt) +{ + switch (f->fmt.pix.pixelformat) { + case V4L2_PIX_FMT_YUV420: + f->fmt.pix.bytesperline = f->fmt.pix.width * 3 / 2; + break; + case V4L2_PIX_FMT_YUYV: + default: + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + } + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct deinterlace_fmt *fmt; + struct deinterlace_ctx *ctx = priv; + + fmt = find_format(f); + if (!fmt || !(fmt->types & MEM2MEM_CAPTURE)) + f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUV420; + + f->fmt.pix.colorspace = ctx->colorspace; + + if (f->fmt.pix.field != V4L2_FIELD_INTERLACED_TB && + f->fmt.pix.field != V4L2_FIELD_INTERLACED_BT && + f->fmt.pix.field != V4L2_FIELD_NONE) + f->fmt.pix.field = V4L2_FIELD_INTERLACED_TB; + + return vidioc_try_fmt(f, fmt); +} + +static int vidioc_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct deinterlace_fmt *fmt; + + fmt = find_format(f); + if (!fmt || !(fmt->types & MEM2MEM_OUTPUT)) + f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUV420; + + if (!f->fmt.pix.colorspace) + f->fmt.pix.colorspace = V4L2_COLORSPACE_REC709; + + if (f->fmt.pix.field != V4L2_FIELD_SEQ_TB && + f->fmt.pix.field != V4L2_FIELD_SEQ_BT) + f->fmt.pix.field = V4L2_FIELD_SEQ_TB; + + return vidioc_try_fmt(f, fmt); +} + +static int vidioc_s_fmt(struct deinterlace_ctx *ctx, struct v4l2_format *f) +{ + struct deinterlace_q_data *q_data; + struct vb2_queue *vq; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(f->type); + if (!q_data) + return -EINVAL; + + if (vb2_is_busy(vq)) { + v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__); + return -EBUSY; + } + + q_data->fmt = find_format(f); + if (!q_data->fmt) { + v4l2_err(&ctx->dev->v4l2_dev, + "Couldn't set format type %d, wxh: %dx%d. fmt: %d, field: %d\n", + f->type, f->fmt.pix.width, f->fmt.pix.height, + f->fmt.pix.pixelformat, f->fmt.pix.field); + return -EINVAL; + } + + q_data->width = f->fmt.pix.width; + q_data->height = f->fmt.pix.height; + q_data->field = f->fmt.pix.field; + + switch (f->fmt.pix.pixelformat) { + case V4L2_PIX_FMT_YUV420: + f->fmt.pix.bytesperline = f->fmt.pix.width * 3 / 2; + q_data->sizeimage = (q_data->width * q_data->height * 3) / 2; + break; + case V4L2_PIX_FMT_YUYV: + default: + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + q_data->sizeimage = q_data->width * q_data->height * 2; + } + + dprintk(ctx->dev, + "Setting format for type %d, wxh: %dx%d, fmt: %d, field: %d\n", + f->type, q_data->width, q_data->height, q_data->fmt->fourcc, + q_data->field); + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = vidioc_try_fmt_vid_cap(file, priv, f); + if (ret) + return ret; + return vidioc_s_fmt(priv, f); +} + +static int vidioc_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct deinterlace_ctx *ctx = priv; + int ret; + + ret = vidioc_try_fmt_vid_out(file, priv, f); + if (ret) + return ret; + + ret = vidioc_s_fmt(priv, f); + if (!ret) + ctx->colorspace = f->fmt.pix.colorspace; + + return ret; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct deinterlace_ctx *ctx = priv; + + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct deinterlace_ctx *ctx = priv; + + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct deinterlace_ctx *ctx = priv; + + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct deinterlace_ctx *ctx = priv; + + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct deinterlace_q_data *s_q_data, *d_q_data; + struct deinterlace_ctx *ctx = priv; + + s_q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_OUTPUT); + d_q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_CAPTURE); + + /* Check that src and dst queues have the same pix format */ + if (s_q_data->fmt->fourcc != d_q_data->fmt->fourcc) { + v4l2_err(&ctx->dev->v4l2_dev, + "src and dst formats don't match.\n"); + return -EINVAL; + } + + /* Check that input and output deinterlacing types are compatible */ + switch (s_q_data->field) { + case V4L2_FIELD_SEQ_BT: + if (d_q_data->field != V4L2_FIELD_NONE && + d_q_data->field != V4L2_FIELD_INTERLACED_BT) { + v4l2_err(&ctx->dev->v4l2_dev, + "src and dst field conversion [(%d)->(%d)] not supported.\n", + s_q_data->field, d_q_data->field); + return -EINVAL; + } + break; + case V4L2_FIELD_SEQ_TB: + if (d_q_data->field != V4L2_FIELD_NONE && + d_q_data->field != V4L2_FIELD_INTERLACED_TB) { + v4l2_err(&ctx->dev->v4l2_dev, + "src and dst field conversion [(%d)->(%d)] not supported.\n", + s_q_data->field, d_q_data->field); + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct deinterlace_ctx *ctx = priv; + + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); +} + +static const struct v4l2_ioctl_ops deinterlace_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = vidioc_g_fmt_vid_out, + .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, + .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, + + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, +}; + + +/* + * Queue operations + */ +struct vb2_dc_conf { + struct device *dev; +}; + +static int deinterlace_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct deinterlace_ctx *ctx = vb2_get_drv_priv(vq); + struct deinterlace_q_data *q_data; + unsigned int size, count = *nbuffers; + + q_data = get_q_data(vq->type); + + switch (q_data->fmt->fourcc) { + case V4L2_PIX_FMT_YUV420: + size = q_data->width * q_data->height * 3 / 2; + break; + case V4L2_PIX_FMT_YUYV: + default: + size = q_data->width * q_data->height * 2; + } + + *nplanes = 1; + *nbuffers = count; + sizes[0] = size; + + alloc_ctxs[0] = ctx->dev->alloc_ctx; + + dprintk(ctx->dev, "get %d buffer(s) of size %d each.\n", count, size); + + return 0; +} + +static int deinterlace_buf_prepare(struct vb2_buffer *vb) +{ + struct deinterlace_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct deinterlace_q_data *q_data; + + dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type); + + q_data = get_q_data(vb->vb2_queue->type); + + if (vb2_plane_size(vb, 0) < q_data->sizeimage) { + dprintk(ctx->dev, "%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), (long)q_data->sizeimage); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, q_data->sizeimage); + + return 0; +} + +static void deinterlace_buf_queue(struct vb2_buffer *vb) +{ + struct deinterlace_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} + +static struct vb2_ops deinterlace_qops = { + .queue_setup = deinterlace_queue_setup, + .buf_prepare = deinterlace_buf_prepare, + .buf_queue = deinterlace_buf_queue, +}; + +static int queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct deinterlace_ctx *ctx = priv; + int ret; + + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + src_vq->io_modes = VB2_MMAP | VB2_USERPTR; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + src_vq->ops = &deinterlace_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + q_data[V4L2_M2M_SRC].fmt = &formats[0]; + q_data[V4L2_M2M_SRC].width = 640; + q_data[V4L2_M2M_SRC].height = 480; + q_data[V4L2_M2M_SRC].sizeimage = (640 * 480 * 3) / 2; + q_data[V4L2_M2M_SRC].field = V4L2_FIELD_SEQ_TB; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->ops = &deinterlace_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + q_data[V4L2_M2M_DST].fmt = &formats[0]; + q_data[V4L2_M2M_DST].width = 640; + q_data[V4L2_M2M_DST].height = 480; + q_data[V4L2_M2M_DST].sizeimage = (640 * 480 * 3) / 2; + q_data[V4L2_M2M_SRC].field = V4L2_FIELD_INTERLACED_TB; + + return vb2_queue_init(dst_vq); +} + +/* + * File operations + */ +static int deinterlace_open(struct file *file) +{ + struct deinterlace_dev *pcdev = video_drvdata(file); + struct deinterlace_ctx *ctx = NULL; + + ctx = kzalloc(sizeof *ctx, GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + file->private_data = ctx; + ctx->dev = pcdev; + + ctx->m2m_ctx = v4l2_m2m_ctx_init(pcdev->m2m_dev, ctx, &queue_init); + if (IS_ERR(ctx->m2m_ctx)) { + int ret = PTR_ERR(ctx->m2m_ctx); + + kfree(ctx); + return ret; + } + + ctx->xt = kzalloc(sizeof(struct dma_async_tx_descriptor) + + sizeof(struct data_chunk), GFP_KERNEL); + if (!ctx->xt) { + int ret = PTR_ERR(ctx->xt); + + kfree(ctx); + return ret; + } + + ctx->colorspace = V4L2_COLORSPACE_REC709; + + dprintk(pcdev, "Created instance %p, m2m_ctx: %p\n", ctx, ctx->m2m_ctx); + + return 0; +} + +static int deinterlace_release(struct file *file) +{ + struct deinterlace_dev *pcdev = video_drvdata(file); + struct deinterlace_ctx *ctx = file->private_data; + + dprintk(pcdev, "Releasing instance %p\n", ctx); + + v4l2_m2m_ctx_release(ctx->m2m_ctx); + kfree(ctx->xt); + kfree(ctx); + + return 0; +} + +static unsigned int deinterlace_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct deinterlace_ctx *ctx = file->private_data; + int ret; + + deinterlace_lock(ctx); + ret = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + deinterlace_unlock(ctx); + + return ret; +} + +static int deinterlace_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct deinterlace_ctx *ctx = file->private_data; + + return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); +} + +static const struct v4l2_file_operations deinterlace_fops = { + .owner = THIS_MODULE, + .open = deinterlace_open, + .release = deinterlace_release, + .poll = deinterlace_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = deinterlace_mmap, +}; + +static struct video_device deinterlace_videodev = { + .name = MEM2MEM_NAME, + .fops = &deinterlace_fops, + .ioctl_ops = &deinterlace_ioctl_ops, + .minor = -1, + .release = video_device_release, + .vfl_dir = VFL_DIR_M2M, +}; + +static struct v4l2_m2m_ops m2m_ops = { + .device_run = deinterlace_device_run, + .job_ready = deinterlace_job_ready, + .job_abort = deinterlace_job_abort, + .lock = deinterlace_lock, + .unlock = deinterlace_unlock, +}; + +static int deinterlace_probe(struct platform_device *pdev) +{ + struct deinterlace_dev *pcdev; + struct video_device *vfd; + dma_cap_mask_t mask; + int ret = 0; + + pcdev = kzalloc(sizeof *pcdev, GFP_KERNEL); + if (!pcdev) + return -ENOMEM; + + spin_lock_init(&pcdev->irqlock); + + dma_cap_zero(mask); + dma_cap_set(DMA_INTERLEAVE, mask); + pcdev->dma_chan = dma_request_channel(mask, NULL, pcdev); + if (!pcdev->dma_chan) + goto free_dev; + + if (!dma_has_cap(DMA_INTERLEAVE, pcdev->dma_chan->device->cap_mask)) { + v4l2_err(&pcdev->v4l2_dev, "DMA does not support INTERLEAVE\n"); + goto rel_dma; + } + + ret = v4l2_device_register(&pdev->dev, &pcdev->v4l2_dev); + if (ret) + goto rel_dma; + + atomic_set(&pcdev->busy, 0); + mutex_init(&pcdev->dev_mutex); + + vfd = video_device_alloc(); + if (!vfd) { + v4l2_err(&pcdev->v4l2_dev, "Failed to allocate video device\n"); + ret = -ENOMEM; + goto unreg_dev; + } + + *vfd = deinterlace_videodev; + vfd->lock = &pcdev->dev_mutex; + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&pcdev->v4l2_dev, "Failed to register video device\n"); + goto rel_vdev; + } + + video_set_drvdata(vfd, pcdev); + snprintf(vfd->name, sizeof(vfd->name), "%s", deinterlace_videodev.name); + pcdev->vfd = vfd; + v4l2_info(&pcdev->v4l2_dev, MEM2MEM_TEST_MODULE_NAME + " Device registered as /dev/video%d\n", vfd->num); + + platform_set_drvdata(pdev, pcdev); + + pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(pcdev->alloc_ctx)) { + v4l2_err(&pcdev->v4l2_dev, "Failed to alloc vb2 context\n"); + ret = PTR_ERR(pcdev->alloc_ctx); + goto err_ctx; + } + + pcdev->m2m_dev = v4l2_m2m_init(&m2m_ops); + if (IS_ERR(pcdev->m2m_dev)) { + v4l2_err(&pcdev->v4l2_dev, "Failed to init mem2mem device\n"); + ret = PTR_ERR(pcdev->m2m_dev); + goto err_m2m; + } + + return 0; + + v4l2_m2m_release(pcdev->m2m_dev); +err_m2m: + video_unregister_device(pcdev->vfd); +err_ctx: + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); +rel_vdev: + video_device_release(vfd); +unreg_dev: + v4l2_device_unregister(&pcdev->v4l2_dev); +rel_dma: + dma_release_channel(pcdev->dma_chan); +free_dev: + kfree(pcdev); + + return ret; +} + +static int deinterlace_remove(struct platform_device *pdev) +{ + struct deinterlace_dev *pcdev = + (struct deinterlace_dev *)platform_get_drvdata(pdev); + + v4l2_info(&pcdev->v4l2_dev, "Removing " MEM2MEM_TEST_MODULE_NAME); + v4l2_m2m_release(pcdev->m2m_dev); + video_unregister_device(pcdev->vfd); + v4l2_device_unregister(&pcdev->v4l2_dev); + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); + dma_release_channel(pcdev->dma_chan); + kfree(pcdev); + + return 0; +} + +static struct platform_driver deinterlace_pdrv = { + .probe = deinterlace_probe, + .remove = deinterlace_remove, + .driver = { + .name = MEM2MEM_NAME, + .owner = THIS_MODULE, + }, +}; + +static void __exit deinterlace_exit(void) +{ + platform_driver_unregister(&deinterlace_pdrv); +} + +static int __init deinterlace_init(void) +{ + return platform_driver_register(&deinterlace_pdrv); +} + +module_init(deinterlace_init); +module_exit(deinterlace_exit); + diff --git a/drivers/media/video/marvell-ccic/Kconfig b/drivers/media/platform/marvell-ccic/Kconfig similarity index 100% rename from drivers/media/video/marvell-ccic/Kconfig rename to drivers/media/platform/marvell-ccic/Kconfig diff --git a/drivers/media/video/marvell-ccic/Makefile b/drivers/media/platform/marvell-ccic/Makefile similarity index 100% rename from drivers/media/video/marvell-ccic/Makefile rename to drivers/media/platform/marvell-ccic/Makefile diff --git a/drivers/media/video/marvell-ccic/cafe-driver.c b/drivers/media/platform/marvell-ccic/cafe-driver.c similarity index 100% rename from drivers/media/video/marvell-ccic/cafe-driver.c rename to drivers/media/platform/marvell-ccic/cafe-driver.c diff --git a/drivers/media/video/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c similarity index 100% rename from drivers/media/video/marvell-ccic/mcam-core.c rename to drivers/media/platform/marvell-ccic/mcam-core.c diff --git a/drivers/media/video/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h similarity index 100% rename from drivers/media/video/marvell-ccic/mcam-core.h rename to drivers/media/platform/marvell-ccic/mcam-core.h diff --git a/drivers/media/video/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c similarity index 100% rename from drivers/media/video/marvell-ccic/mmp-driver.c rename to drivers/media/platform/marvell-ccic/mmp-driver.c diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/platform/mem2mem_testdev.c similarity index 97% rename from drivers/media/video/mem2mem_testdev.c rename to drivers/media/platform/mem2mem_testdev.c index 0b91a5cd38ebaaba2e940b7cf93244e9e5476f3c..d03637537118047a6ced26241cb55842de398d02 100644 --- a/drivers/media/video/mem2mem_testdev.c +++ b/drivers/media/platform/mem2mem_testdev.c @@ -70,7 +70,7 @@ MODULE_VERSION("0.1.1"); v4l2_dbg(1, 1, &dev->v4l2_dev, "%s: " fmt, __func__, ## arg) -void m2mtest_dev_release(struct device *dev) +static void m2mtest_dev_release(struct device *dev) {} static struct platform_device m2mtest_pdev = { @@ -430,7 +430,8 @@ static int vidioc_querycap(struct file *file, void *priv, { strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1); strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); - strlcpy(cap->bus_info, MEM2MEM_NAME, sizeof(cap->bus_info)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:%s", MEM2MEM_NAME); cap->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; @@ -838,7 +839,6 @@ static int queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *ds struct m2mtest_ctx *ctx = priv; int ret; - memset(src_vq, 0, sizeof(*src_vq)); src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; src_vq->io_modes = VB2_MMAP; src_vq->drv_priv = ctx; @@ -850,7 +850,6 @@ static int queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *ds if (ret) return ret; - memset(dst_vq, 0, sizeof(*dst_vq)); dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; dst_vq->io_modes = VB2_MMAP; dst_vq->drv_priv = ctx; @@ -891,10 +890,15 @@ static int m2mtest_open(struct file *file) struct m2mtest_dev *dev = video_drvdata(file); struct m2mtest_ctx *ctx = NULL; struct v4l2_ctrl_handler *hdl; + int rc = 0; + if (mutex_lock_interruptible(&dev->dev_mutex)) + return -ERESTARTSYS; ctx = kzalloc(sizeof *ctx, GFP_KERNEL); - if (!ctx) - return -ENOMEM; + if (!ctx) { + rc = -ENOMEM; + goto open_unlock; + } v4l2_fh_init(&ctx->fh, video_devdata(file)); file->private_data = &ctx->fh; @@ -906,10 +910,9 @@ static int m2mtest_open(struct file *file) v4l2_ctrl_new_custom(hdl, &m2mtest_ctrl_trans_time_msec, NULL); v4l2_ctrl_new_custom(hdl, &m2mtest_ctrl_trans_num_bufs, NULL); if (hdl->error) { - int err = hdl->error; - + rc = hdl->error; v4l2_ctrl_handler_free(hdl); - return err; + goto open_unlock; } ctx->fh.ctrl_handler = hdl; v4l2_ctrl_handler_setup(hdl); @@ -927,11 +930,11 @@ static int m2mtest_open(struct file *file) ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init); if (IS_ERR(ctx->m2m_ctx)) { - int ret = PTR_ERR(ctx->m2m_ctx); + rc = PTR_ERR(ctx->m2m_ctx); v4l2_ctrl_handler_free(hdl); kfree(ctx); - return ret; + goto open_unlock; } v4l2_fh_add(&ctx->fh); @@ -939,7 +942,9 @@ static int m2mtest_open(struct file *file) dprintk(dev, "Created instance %p, m2m_ctx: %p\n", ctx, ctx->m2m_ctx); - return 0; +open_unlock: + mutex_unlock(&dev->dev_mutex); + return rc; } static int m2mtest_release(struct file *file) @@ -952,7 +957,9 @@ static int m2mtest_release(struct file *file) v4l2_fh_del(&ctx->fh); v4l2_fh_exit(&ctx->fh); v4l2_ctrl_handler_free(&ctx->hdl); + mutex_lock(&dev->dev_mutex); v4l2_m2m_ctx_release(ctx->m2m_ctx); + mutex_unlock(&dev->dev_mutex); kfree(ctx); atomic_dec(&dev->num_inst); @@ -970,9 +977,15 @@ static unsigned int m2mtest_poll(struct file *file, static int m2mtest_mmap(struct file *file, struct vm_area_struct *vma) { + struct m2mtest_dev *dev = video_drvdata(file); struct m2mtest_ctx *ctx = file2ctx(file); + int res; - return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + if (mutex_lock_interruptible(&dev->dev_mutex)) + return -ERESTARTSYS; + res = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + mutex_unlock(&dev->dev_mutex); + return res; } static const struct v4l2_file_operations m2mtest_fops = { @@ -986,6 +999,7 @@ static const struct v4l2_file_operations m2mtest_fops = { static struct video_device m2mtest_videodev = { .name = MEM2MEM_NAME, + .vfl_dir = VFL_DIR_M2M, .fops = &m2mtest_fops, .ioctl_ops = &m2mtest_ioctl_ops, .minor = -1, @@ -1027,10 +1041,6 @@ static int m2mtest_probe(struct platform_device *pdev) } *vfd = m2mtest_videodev; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vfd->flags); vfd->lock = &dev->dev_mutex; ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); diff --git a/drivers/media/video/mx2_emmaprp.c b/drivers/media/platform/mx2_emmaprp.c similarity index 94% rename from drivers/media/video/mx2_emmaprp.c rename to drivers/media/platform/mx2_emmaprp.c index 5f8a6f5b98f91c3af4e1bdbd06654e7b496d8d65..8f22ce543cf704315399b751371d79f8dfbd2c6e 100644 --- a/drivers/media/video/mx2_emmaprp.c +++ b/drivers/media/platform/mx2_emmaprp.c @@ -209,7 +209,7 @@ struct emmaprp_dev { int irq_emma; void __iomem *base_emma; - struct clk *clk_emma; + struct clk *clk_emma_ahb, *clk_emma_ipg; struct resource *res_emma; struct v4l2_m2m_dev *m2m_dev; @@ -757,7 +757,6 @@ static int queue_init(void *priv, struct vb2_queue *src_vq, struct emmaprp_ctx *ctx = priv; int ret; - memset(src_vq, 0, sizeof(*src_vq)); src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; src_vq->io_modes = VB2_MMAP | VB2_USERPTR; src_vq->drv_priv = ctx; @@ -769,7 +768,6 @@ static int queue_init(void *priv, struct vb2_queue *src_vq, if (ret) return ret; - memset(dst_vq, 0, sizeof(*dst_vq)); dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; dst_vq->io_modes = VB2_MMAP | VB2_USERPTR; dst_vq->drv_priv = ctx; @@ -795,18 +793,26 @@ static int emmaprp_open(struct file *file) file->private_data = ctx; ctx->dev = pcdev; + if (mutex_lock_interruptible(&pcdev->dev_mutex)) { + kfree(ctx); + return -ERESTARTSYS; + } + ctx->m2m_ctx = v4l2_m2m_ctx_init(pcdev->m2m_dev, ctx, &queue_init); if (IS_ERR(ctx->m2m_ctx)) { int ret = PTR_ERR(ctx->m2m_ctx); + mutex_unlock(&pcdev->dev_mutex); kfree(ctx); return ret; } - clk_enable(pcdev->clk_emma); + clk_prepare_enable(pcdev->clk_emma_ipg); + clk_prepare_enable(pcdev->clk_emma_ahb); ctx->q_data[V4L2_M2M_SRC].fmt = &formats[1]; ctx->q_data[V4L2_M2M_DST].fmt = &formats[0]; + mutex_unlock(&pcdev->dev_mutex); dprintk(pcdev, "Created instance %p, m2m_ctx: %p\n", ctx, ctx->m2m_ctx); @@ -820,8 +826,11 @@ static int emmaprp_release(struct file *file) dprintk(pcdev, "Releasing instance %p\n", ctx); - clk_disable(pcdev->clk_emma); + mutex_lock(&pcdev->dev_mutex); + clk_disable_unprepare(pcdev->clk_emma_ahb); + clk_disable_unprepare(pcdev->clk_emma_ipg); v4l2_m2m_ctx_release(ctx->m2m_ctx); + mutex_unlock(&pcdev->dev_mutex); kfree(ctx); return 0; @@ -830,16 +839,27 @@ static int emmaprp_release(struct file *file) static unsigned int emmaprp_poll(struct file *file, struct poll_table_struct *wait) { + struct emmaprp_dev *pcdev = video_drvdata(file); struct emmaprp_ctx *ctx = file->private_data; + unsigned int res; - return v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + mutex_lock(&pcdev->dev_mutex); + res = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + mutex_unlock(&pcdev->dev_mutex); + return res; } static int emmaprp_mmap(struct file *file, struct vm_area_struct *vma) { + struct emmaprp_dev *pcdev = video_drvdata(file); struct emmaprp_ctx *ctx = file->private_data; + int ret; - return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + if (mutex_lock_interruptible(&pcdev->dev_mutex)) + return -ERESTARTSYS; + ret = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + mutex_unlock(&pcdev->dev_mutex); + return ret; } static const struct v4l2_file_operations emmaprp_fops = { @@ -857,6 +877,7 @@ static struct video_device emmaprp_videodev = { .ioctl_ops = &emmaprp_ioctl_ops, .minor = -1, .release = video_device_release, + .vfl_dir = VFL_DIR_M2M, }; static struct v4l2_m2m_ops m2m_ops = { @@ -874,29 +895,31 @@ static int emmaprp_probe(struct platform_device *pdev) int irq_emma; int ret; - pcdev = kzalloc(sizeof *pcdev, GFP_KERNEL); + pcdev = devm_kzalloc(&pdev->dev, sizeof(*pcdev), GFP_KERNEL); if (!pcdev) return -ENOMEM; spin_lock_init(&pcdev->irqlock); - pcdev->clk_emma = clk_get(&pdev->dev, NULL); - if (IS_ERR(pcdev->clk_emma)) { - ret = PTR_ERR(pcdev->clk_emma); - goto free_dev; + pcdev->clk_emma_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(pcdev->clk_emma_ipg)) { + return PTR_ERR(pcdev->clk_emma_ipg); } + pcdev->clk_emma_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(pcdev->clk_emma_ahb)) + return PTR_ERR(pcdev->clk_emma_ahb); + irq_emma = platform_get_irq(pdev, 0); res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (irq_emma < 0 || res_emma == NULL) { dev_err(&pdev->dev, "Missing platform resources data\n"); - ret = -ENODEV; - goto free_clk; + return -ENODEV; } ret = v4l2_device_register(&pdev->dev, &pcdev->v4l2_dev); if (ret) - goto free_clk; + return ret; mutex_init(&pcdev->dev_mutex); @@ -908,10 +931,6 @@ static int emmaprp_probe(struct platform_device *pdev) } *vfd = emmaprp_videodev; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vfd->flags); vfd->lock = &pcdev->dev_mutex; video_set_drvdata(vfd, pcdev); @@ -922,21 +941,20 @@ static int emmaprp_probe(struct platform_device *pdev) platform_set_drvdata(pdev, pcdev); - if (devm_request_mem_region(&pdev->dev, res_emma->start, - resource_size(res_emma), MEM2MEM_NAME) == NULL) - goto rel_vdev; - - pcdev->base_emma = devm_ioremap(&pdev->dev, res_emma->start, - resource_size(res_emma)); - if (!pcdev->base_emma) + pcdev->base_emma = devm_request_and_ioremap(&pdev->dev, res_emma); + if (!pcdev->base_emma) { + ret = -ENXIO; goto rel_vdev; + } pcdev->irq_emma = irq_emma; pcdev->res_emma = res_emma; if (devm_request_irq(&pdev->dev, pcdev->irq_emma, emmaprp_irq, - 0, MEM2MEM_NAME, pcdev) < 0) + 0, MEM2MEM_NAME, pcdev) < 0) { + ret = -ENODEV; goto rel_vdev; + } pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); if (IS_ERR(pcdev->alloc_ctx)) { @@ -969,10 +987,6 @@ static int emmaprp_probe(struct platform_device *pdev) video_device_release(vfd); unreg_dev: v4l2_device_unregister(&pcdev->v4l2_dev); -free_clk: - clk_put(pcdev->clk_emma); -free_dev: - kfree(pcdev); return ret; } @@ -987,8 +1001,6 @@ static int emmaprp_remove(struct platform_device *pdev) v4l2_m2m_release(pcdev->m2m_dev); vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); v4l2_device_unregister(&pcdev->v4l2_dev); - clk_put(pcdev->clk_emma); - kfree(pcdev); return 0; } diff --git a/drivers/media/video/omap/Kconfig b/drivers/media/platform/omap/Kconfig similarity index 100% rename from drivers/media/video/omap/Kconfig rename to drivers/media/platform/omap/Kconfig diff --git a/drivers/media/video/omap/Makefile b/drivers/media/platform/omap/Makefile similarity index 81% rename from drivers/media/video/omap/Makefile rename to drivers/media/platform/omap/Makefile index fc410b438f7d6545b2d35ce19e9fb0cdf43e2333..d80df41fde2816c993b163a35c06d854ad063320 100644 --- a/drivers/media/video/omap/Makefile +++ b/drivers/media/platform/omap/Makefile @@ -3,6 +3,6 @@ # # OMAP2/3 Display driver -omap-vout-y := omap_vout.o omap_voutlib.o +omap-vout-y += omap_vout.o omap_voutlib.o omap-vout-$(CONFIG_VIDEO_OMAP2_VOUT_VRFB) += omap_vout_vrfb.o obj-$(CONFIG_VIDEO_OMAP2_VOUT) += omap-vout.o diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c similarity index 99% rename from drivers/media/video/omap/omap_vout.c rename to drivers/media/platform/omap/omap_vout.c index 88cf9d952631719293b48093459f9e74ac7cd762..196e5167005081f5d3c424928a3e71b83274fded 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/platform/omap/omap_vout.c @@ -1291,7 +1291,7 @@ static int vidioc_g_crop(struct file *file, void *fh, struct v4l2_crop *crop) return 0; } -static int vidioc_s_crop(struct file *file, void *fh, struct v4l2_crop *crop) +static int vidioc_s_crop(struct file *file, void *fh, const struct v4l2_crop *crop) { int ret = -EINVAL; struct omap_vout_device *vout = fh; @@ -1744,7 +1744,7 @@ static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) } static int vidioc_s_fbuf(struct file *file, void *fh, - struct v4l2_framebuffer *a) + const struct v4l2_framebuffer *a) { int enable = 0; struct omap_overlay *ovl; @@ -1951,6 +1951,7 @@ static int __init omap_vout_setup_video_data(struct omap_vout_device *vout) vfd->fops = &omap_vout_fops; vfd->v4l2_dev = &vout->vid_dev->v4l2_dev; + vfd->vfl_dir = VFL_DIR_TX; mutex_init(&vout->lock); vfd->minor = -1; diff --git a/drivers/media/video/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c similarity index 100% rename from drivers/media/video/omap/omap_vout_vrfb.c rename to drivers/media/platform/omap/omap_vout_vrfb.c diff --git a/drivers/media/video/omap/omap_vout_vrfb.h b/drivers/media/platform/omap/omap_vout_vrfb.h similarity index 100% rename from drivers/media/video/omap/omap_vout_vrfb.h rename to drivers/media/platform/omap/omap_vout_vrfb.h diff --git a/drivers/media/video/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h similarity index 100% rename from drivers/media/video/omap/omap_voutdef.h rename to drivers/media/platform/omap/omap_voutdef.h diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/platform/omap/omap_voutlib.c similarity index 100% rename from drivers/media/video/omap/omap_voutlib.c rename to drivers/media/platform/omap/omap_voutlib.c diff --git a/drivers/media/video/omap/omap_voutlib.h b/drivers/media/platform/omap/omap_voutlib.h similarity index 100% rename from drivers/media/video/omap/omap_voutlib.h rename to drivers/media/platform/omap/omap_voutlib.h diff --git a/drivers/media/video/omap24xxcam-dma.c b/drivers/media/platform/omap24xxcam-dma.c similarity index 99% rename from drivers/media/video/omap24xxcam-dma.c rename to drivers/media/platform/omap24xxcam-dma.c index b5ae170de4a529e814b49ce824ec9cb7cd22c400..9c00776d658331a052641c043b7b3a2146fb2089 100644 --- a/drivers/media/video/omap24xxcam-dma.c +++ b/drivers/media/platform/omap24xxcam-dma.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/omap24xxcam-dma.c + * drivers/media/platform/omap24xxcam-dma.c * * Copyright (C) 2004 MontaVista Software, Inc. * Copyright (C) 2004 Texas Instruments. diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/platform/omap24xxcam.c similarity index 99% rename from drivers/media/video/omap24xxcam.c rename to drivers/media/platform/omap24xxcam.c index e5015b0d5508cec9bd9af486c734fef3ff478179..fde2e66f6f332e3a4f7800f1b8570fe9a039a033 100644 --- a/drivers/media/video/omap24xxcam.c +++ b/drivers/media/platform/omap24xxcam.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/omap24xxcam.c + * drivers/media/platform/omap24xxcam.c * * OMAP 2 camera block driver. * diff --git a/drivers/media/video/omap24xxcam.h b/drivers/media/platform/omap24xxcam.h similarity index 99% rename from drivers/media/video/omap24xxcam.h rename to drivers/media/platform/omap24xxcam.h index d59727afe8946252d8d3f81e7b67f93e93b7710e..c4395956a493a3a60ee2961407670573f1f9ef39 100644 --- a/drivers/media/video/omap24xxcam.h +++ b/drivers/media/platform/omap24xxcam.h @@ -1,5 +1,5 @@ /* - * drivers/media/video/omap24xxcam.h + * drivers/media/platform/omap24xxcam.h * * Copyright (C) 2004 MontaVista Software, Inc. * Copyright (C) 2004 Texas Instruments. diff --git a/drivers/media/video/omap3isp/Makefile b/drivers/media/platform/omap3isp/Makefile similarity index 100% rename from drivers/media/video/omap3isp/Makefile rename to drivers/media/platform/omap3isp/Makefile diff --git a/drivers/media/video/omap3isp/cfa_coef_table.h b/drivers/media/platform/omap3isp/cfa_coef_table.h similarity index 91% rename from drivers/media/video/omap3isp/cfa_coef_table.h rename to drivers/media/platform/omap3isp/cfa_coef_table.h index c60df0ed075aae3f42ef43460ce9b51b39b53e46..c84df0706f3e098542d822e8fefc0755b010d836 100644 --- a/drivers/media/video/omap3isp/cfa_coef_table.h +++ b/drivers/media/platform/omap3isp/cfa_coef_table.h @@ -23,7 +23,7 @@ * 02110-1301 USA */ -244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, +{ 244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, 248, 0, 0, 0, 0, 40, 0, 0, 244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248, 244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, @@ -31,8 +31,8 @@ 247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248, 244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, 248, 0, 0, 0, 0, 40, 0, 0, 244, 12, 250, 4, 0, 27, 0, 250, -247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248, - 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, +247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248 }, +{ 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, 0, 0, 0, 248, 0, 0, 40, 0, 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0, 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, @@ -40,8 +40,8 @@ 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0, 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, 0, 0, 0, 248, 0, 0, 40, 0, 4, 250, 12, 244, 250, 0, 27, 0, - 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0, - 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, + 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0 }, +{ 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, 0, 0, 0, 248, 0, 0, 40, 0, 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0, 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, @@ -49,8 +49,8 @@ 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0, 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, 0, 0, 0, 248, 0, 0, 40, 0, 0, 247, 0, 244, 247, 36, 27, 12, - 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0, -244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, + 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0 }, +{ 244,12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, 248, 0, 0, 0, 0, 40, 0, 0, 244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248, 244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, @@ -58,4 +58,4 @@ 250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248, 244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, 248, 0, 0, 0, 0, 40, 0, 0, 244, 0, 247, 0, 12, 27, 36, 247, -250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248 +250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248 }, diff --git a/drivers/media/video/omap3isp/gamma_table.h b/drivers/media/platform/omap3isp/gamma_table.h similarity index 100% rename from drivers/media/video/omap3isp/gamma_table.h rename to drivers/media/platform/omap3isp/gamma_table.h diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c similarity index 98% rename from drivers/media/video/omap3isp/isp.c rename to drivers/media/platform/omap3isp/isp.c index 1c347633e663b65b1acb561ad6c2e00a868920c2..d7aa513dcc8deace0704b37c5c378968ff558b37 100644 --- a/drivers/media/video/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -252,13 +252,18 @@ static u32 isp_set_xclk(struct isp_device *isp, u32 xclk, u8 xclksel) } /* - * isp_power_settings - Sysconfig settings, for Power Management. + * isp_core_init - ISP core settings * @isp: OMAP3 ISP device * @idle: Consider idle state. * - * Sets the power settings for the ISP, and SBL bus. + * Set the power settings for the ISP and SBL bus and cConfigure the HS/VS + * interrupt source. + * + * We need to configure the HS/VS interrupt source before interrupts get + * enabled, as the sensor might be free-running and the ISP default setting + * (HS edge) would put an unnecessary burden on the CPU. */ -static void isp_power_settings(struct isp_device *isp, int idle) +static void isp_core_init(struct isp_device *isp, int idle) { isp_reg_writel(isp, ((idle ? ISP_SYSCONFIG_MIDLEMODE_SMARTSTANDBY : @@ -268,9 +273,10 @@ static void isp_power_settings(struct isp_device *isp, int idle) ISP_SYSCONFIG_AUTOIDLE : 0), OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG); - if (isp->autoidle) - isp_reg_writel(isp, ISPCTRL_SBL_AUTOIDLE, OMAP3_ISP_IOMEM_MAIN, - ISP_CTRL); + isp_reg_writel(isp, + (isp->autoidle ? ISPCTRL_SBL_AUTOIDLE : 0) | + ISPCTRL_SYNC_DETECT_VSRISE, + OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); } /* @@ -287,7 +293,7 @@ static void isp_power_settings(struct isp_device *isp, int idle) void omap3isp_configure_bridge(struct isp_device *isp, enum ccdc_input_entity input, const struct isp_parallel_platform_data *pdata, - unsigned int shift) + unsigned int shift, unsigned int bridge) { u32 ispctrl_val; @@ -296,12 +302,12 @@ void omap3isp_configure_bridge(struct isp_device *isp, ispctrl_val &= ~ISPCTRL_PAR_CLK_POL_INV; ispctrl_val &= ~ISPCTRL_PAR_SER_CLK_SEL_MASK; ispctrl_val &= ~ISPCTRL_PAR_BRIDGE_MASK; + ispctrl_val |= bridge; switch (input) { case CCDC_INPUT_PARALLEL: ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_PARALLEL; ispctrl_val |= pdata->clk_pol << ISPCTRL_PAR_CLK_POL_SHIFT; - ispctrl_val |= pdata->bridge << ISPCTRL_PAR_BRIDGE_SHIFT; shift += pdata->data_lane_shift * 2; break; @@ -323,9 +329,6 @@ void omap3isp_configure_bridge(struct isp_device *isp, ispctrl_val |= ((shift/2) << ISPCTRL_SHIFT_SHIFT) & ISPCTRL_SHIFT_MASK; - ispctrl_val &= ~ISPCTRL_SYNC_DETECT_MASK; - ispctrl_val |= ISPCTRL_SYNC_DETECT_VSRISE; - isp_reg_writel(isp, ispctrl_val, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); } @@ -1281,7 +1284,9 @@ static void __isp_subclk_update(struct isp_device *isp) { u32 clk = 0; - if (isp->subclk_resources & OMAP3_ISP_SUBCLK_H3A) + /* AEWB and AF share the same clock. */ + if (isp->subclk_resources & + (OMAP3_ISP_SUBCLK_AEWB | OMAP3_ISP_SUBCLK_AF)) clk |= ISPCTRL_H3A_CLK_EN; if (isp->subclk_resources & OMAP3_ISP_SUBCLK_HIST) @@ -1441,7 +1446,7 @@ static int isp_get_clocks(struct isp_device *isp) * * Return a pointer to the ISP device structure, or NULL if an error occurred. */ -struct isp_device *omap3isp_get(struct isp_device *isp) +static struct isp_device *__omap3isp_get(struct isp_device *isp, bool irq) { struct isp_device *__isp = isp; @@ -1460,10 +1465,9 @@ struct isp_device *omap3isp_get(struct isp_device *isp) /* We don't want to restore context before saving it! */ if (isp->has_context) isp_restore_ctx(isp); - else - isp->has_context = 1; - isp_enable_interrupts(isp); + if (irq) + isp_enable_interrupts(isp); out: if (__isp != NULL) @@ -1473,6 +1477,11 @@ struct isp_device *omap3isp_get(struct isp_device *isp) return __isp; } +struct isp_device *omap3isp_get(struct isp_device *isp) +{ + return __omap3isp_get(isp, true); +} + /* * omap3isp_put - Release the ISP * @@ -1488,8 +1497,10 @@ void omap3isp_put(struct isp_device *isp) BUG_ON(isp->ref_count == 0); if (--isp->ref_count == 0) { isp_disable_interrupts(isp); - if (isp->domain) + if (isp->domain) { isp_save_ctx(isp); + isp->has_context = 1; + } /* Reset the ISP if an entity has failed to stop. This is the * only way to recover from such conditions. */ @@ -1973,7 +1984,7 @@ static int __devexit isp_remove(struct platform_device *pdev) isp_unregister_entities(isp); isp_cleanup_modules(isp); - omap3isp_get(isp); + __omap3isp_get(isp, false); iommu_detach_device(isp->domain, &pdev->dev); iommu_domain_free(isp->domain); isp->domain = NULL; @@ -2091,8 +2102,10 @@ static int __devinit isp_probe(struct platform_device *pdev) if (ret < 0) goto error; - if (omap3isp_get(isp) == NULL) + if (__omap3isp_get(isp, false) == NULL) { + ret = -ENODEV; goto error; + } ret = isp_reset(isp); if (ret < 0) @@ -2158,7 +2171,7 @@ static int __devinit isp_probe(struct platform_device *pdev) if (ret < 0) goto error_modules; - isp_power_settings(isp, 1); + isp_core_init(isp, 1); omap3isp_put(isp); return 0; diff --git a/drivers/media/video/omap3isp/isp.h b/drivers/media/platform/omap3isp/isp.h similarity index 97% rename from drivers/media/video/omap3isp/isp.h rename to drivers/media/platform/omap3isp/isp.h index fc7af3e32efd247bd83b16f5197a8a992913e1e8..8be7487c326f7741b5de7145db939667ead5887f 100644 --- a/drivers/media/video/omap3isp/isp.h +++ b/drivers/media/platform/omap3isp/isp.h @@ -90,10 +90,11 @@ enum isp_sbl_resource { enum isp_subclk_resource { OMAP3_ISP_SUBCLK_CCDC = (1 << 0), - OMAP3_ISP_SUBCLK_H3A = (1 << 1), - OMAP3_ISP_SUBCLK_HIST = (1 << 2), - OMAP3_ISP_SUBCLK_PREVIEW = (1 << 3), - OMAP3_ISP_SUBCLK_RESIZER = (1 << 4), + OMAP3_ISP_SUBCLK_AEWB = (1 << 1), + OMAP3_ISP_SUBCLK_AF = (1 << 2), + OMAP3_ISP_SUBCLK_HIST = (1 << 3), + OMAP3_ISP_SUBCLK_PREVIEW = (1 << 4), + OMAP3_ISP_SUBCLK_RESIZER = (1 << 5), }; /* ISP: OMAP 34xx ES 1.0 */ @@ -235,7 +236,7 @@ int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe, void omap3isp_configure_bridge(struct isp_device *isp, enum ccdc_input_entity input, const struct isp_parallel_platform_data *pdata, - unsigned int shift); + unsigned int shift, unsigned int bridge); struct isp_device *omap3isp_get(struct isp_device *isp); void omap3isp_put(struct isp_device *isp); diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c similarity index 93% rename from drivers/media/video/omap3isp/ispccdc.c rename to drivers/media/platform/omap3isp/ispccdc.c index f1220d3d4970d75fb2dec5c91ce77fc2f01f7aae..60181ab96063ea12be4f0a10f6b02e5a86e29991 100644 --- a/drivers/media/video/omap3isp/ispccdc.c +++ b/drivers/media/platform/omap3isp/ispccdc.c @@ -61,6 +61,8 @@ static const unsigned int ccdc_fmts[] = { V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SGBRG12_1X12, + V4L2_MBUS_FMT_YUYV8_2X8, + V4L2_MBUS_FMT_UYVY8_2X8, }; /* @@ -627,9 +629,12 @@ static void ccdc_configure_lpf(struct isp_ccdc_device *ccdc) static void ccdc_configure_alaw(struct isp_ccdc_device *ccdc) { struct isp_device *isp = to_isp_device(ccdc); + const struct isp_format_info *info; u32 alaw = 0; - switch (ccdc->syncif.datsz) { + info = omap3isp_video_format_info(ccdc->formats[CCDC_PAD_SINK].code); + + switch (info->width) { case 8: return; @@ -813,6 +818,7 @@ static void ccdc_config_vp(struct isp_ccdc_device *ccdc) { struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity); struct isp_device *isp = to_isp_device(ccdc); + const struct isp_format_info *info; unsigned long l3_ick = pipe->l3_ick; unsigned int max_div = isp->revision == ISP_REVISION_15_0 ? 64 : 8; unsigned int div = 0; @@ -821,7 +827,9 @@ static void ccdc_config_vp(struct isp_ccdc_device *ccdc) fmtcfg_vp = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG) & ~(ISPCCDC_FMTCFG_VPIN_MASK | ISPCCDC_FMTCFG_VPIF_FRQ_MASK); - switch (ccdc->syncif.datsz) { + info = omap3isp_video_format_info(ccdc->formats[CCDC_PAD_SINK].code); + + switch (info->width) { case 8: case 10: fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_9_0; @@ -835,7 +843,7 @@ static void ccdc_config_vp(struct isp_ccdc_device *ccdc) case 13: fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_12_3; break; - }; + } if (pipe->input) div = DIV_ROUND_UP(l3_ick, pipe->max_rate); @@ -959,26 +967,28 @@ void omap3isp_ccdc_max_rate(struct isp_ccdc_device *ccdc, /* * ccdc_config_sync_if - Set CCDC sync interface configuration * @ccdc: Pointer to ISP CCDC device. - * @syncif: Structure containing the sync parameters like field state, CCDC in - * master/slave mode, raw/yuv data, polarity of data, field, hs, vs - * signals. + * @pdata: Parallel interface platform data (may be NULL) + * @data_size: Data size */ static void ccdc_config_sync_if(struct isp_ccdc_device *ccdc, - struct ispccdc_syncif *syncif) + struct isp_parallel_platform_data *pdata, + unsigned int data_size) { struct isp_device *isp = to_isp_device(ccdc); - u32 syn_mode = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, - ISPCCDC_SYN_MODE); + const struct v4l2_mbus_framefmt *format; + u32 syn_mode = ISPCCDC_SYN_MODE_VDHDEN; - syn_mode |= ISPCCDC_SYN_MODE_VDHDEN; + format = &ccdc->formats[CCDC_PAD_SINK]; - if (syncif->fldstat) - syn_mode |= ISPCCDC_SYN_MODE_FLDSTAT; - else - syn_mode &= ~ISPCCDC_SYN_MODE_FLDSTAT; + if (format->code == V4L2_MBUS_FMT_YUYV8_2X8 || + format->code == V4L2_MBUS_FMT_UYVY8_2X8) { + /* The bridge is enabled for YUV8 formats. Configure the input + * mode accordingly. + */ + syn_mode |= ISPCCDC_SYN_MODE_INPMOD_YCBCR16; + } - syn_mode &= ~ISPCCDC_SYN_MODE_DATSIZ_MASK; - switch (syncif->datsz) { + switch (data_size) { case 8: syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_8; break; @@ -991,55 +1001,31 @@ static void ccdc_config_sync_if(struct isp_ccdc_device *ccdc, case 12: syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_12; break; - }; - - if (syncif->fldmode) - syn_mode |= ISPCCDC_SYN_MODE_FLDMODE; - else - syn_mode &= ~ISPCCDC_SYN_MODE_FLDMODE; + } - if (syncif->datapol) + if (pdata && pdata->data_pol) syn_mode |= ISPCCDC_SYN_MODE_DATAPOL; - else - syn_mode &= ~ISPCCDC_SYN_MODE_DATAPOL; - - if (syncif->fldpol) - syn_mode |= ISPCCDC_SYN_MODE_FLDPOL; - else - syn_mode &= ~ISPCCDC_SYN_MODE_FLDPOL; - if (syncif->hdpol) + if (pdata && pdata->hs_pol) syn_mode |= ISPCCDC_SYN_MODE_HDPOL; - else - syn_mode &= ~ISPCCDC_SYN_MODE_HDPOL; - if (syncif->vdpol) + if (pdata && pdata->vs_pol) syn_mode |= ISPCCDC_SYN_MODE_VDPOL; - else - syn_mode &= ~ISPCCDC_SYN_MODE_VDPOL; - - if (syncif->ccdc_mastermode) { - syn_mode |= ISPCCDC_SYN_MODE_FLDOUT | ISPCCDC_SYN_MODE_VDHDOUT; - isp_reg_writel(isp, - syncif->hs_width << ISPCCDC_HD_VD_WID_HDW_SHIFT - | syncif->vs_width << ISPCCDC_HD_VD_WID_VDW_SHIFT, - OMAP3_ISP_IOMEM_CCDC, - ISPCCDC_HD_VD_WID); - - isp_reg_writel(isp, - syncif->ppln << ISPCCDC_PIX_LINES_PPLN_SHIFT - | syncif->hlprf << ISPCCDC_PIX_LINES_HLPRF_SHIFT, - OMAP3_ISP_IOMEM_CCDC, - ISPCCDC_PIX_LINES); - } else - syn_mode &= ~(ISPCCDC_SYN_MODE_FLDOUT | - ISPCCDC_SYN_MODE_VDHDOUT); isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE); - if (!syncif->bt_r656_en) - isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_REC656IF, - ISPCCDC_REC656IF_R656ON); + /* The CCDC_CFG.Y8POS bit is used in YCbCr8 input mode only. The + * hardware seems to ignore it in all other input modes. + */ + if (format->code == V4L2_MBUS_FMT_UYVY8_2X8) + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG, + ISPCCDC_CFG_Y8POS); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG, + ISPCCDC_CFG_Y8POS); + + isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_REC656IF, + ISPCCDC_REC656IF_R656ON); } /* CCDC formats descriptions */ @@ -1128,6 +1114,7 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc) unsigned int depth_in = 0; struct media_pad *pad; unsigned long flags; + unsigned int bridge; unsigned int shift; u32 syn_mode; u32 ccdc_pattern; @@ -1138,28 +1125,31 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc) pdata = &((struct isp_v4l2_subdevs_group *)sensor->host_priv) ->bus.parallel; - /* Compute shift value for lane shifter to configure the bridge. */ + /* Compute the lane shifter shift value and enable the bridge when the + * input format is YUV. + */ fmt_src.pad = pad->index; fmt_src.which = V4L2_SUBDEV_FORMAT_ACTIVE; if (!v4l2_subdev_call(sensor, pad, get_fmt, NULL, &fmt_src)) { fmt_info = omap3isp_video_format_info(fmt_src.format.code); - depth_in = fmt_info->bpp; + depth_in = fmt_info->width; } fmt_info = omap3isp_video_format_info (isp->isp_ccdc.formats[CCDC_PAD_SINK].code); - depth_out = fmt_info->bpp; - + depth_out = fmt_info->width; shift = depth_in - depth_out; - omap3isp_configure_bridge(isp, ccdc->input, pdata, shift); - ccdc->syncif.datsz = depth_out; - ccdc->syncif.hdpol = pdata ? pdata->hs_pol : 0; - ccdc->syncif.vdpol = pdata ? pdata->vs_pol : 0; - ccdc_config_sync_if(ccdc, &ccdc->syncif); + if (fmt_info->code == V4L2_MBUS_FMT_YUYV8_2X8) + bridge = ISPCTRL_PAR_BRIDGE_LENDIAN; + else if (fmt_info->code == V4L2_MBUS_FMT_UYVY8_2X8) + bridge = ISPCTRL_PAR_BRIDGE_BENDIAN; + else + bridge = ISPCTRL_PAR_BRIDGE_DISABLE; + + omap3isp_configure_bridge(isp, ccdc->input, pdata, shift, bridge); - /* CCDC_PAD_SINK */ - format = &ccdc->formats[CCDC_PAD_SINK]; + ccdc_config_sync_if(ccdc, pdata, depth_out); syn_mode = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE); @@ -1178,13 +1168,8 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc) else syn_mode &= ~ISPCCDC_SYN_MODE_SDR2RSZ; - /* Use PACK8 mode for 1byte per pixel formats. */ - if (omap3isp_video_format_info(format->code)->bpp <= 8) - syn_mode |= ISPCCDC_SYN_MODE_PACK8; - else - syn_mode &= ~ISPCCDC_SYN_MODE_PACK8; - - isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE); + /* CCDC_PAD_SINK */ + format = &ccdc->formats[CCDC_PAD_SINK]; /* Mosaic filter */ switch (format->code) { @@ -1215,6 +1200,7 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc) OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VDINT); /* CCDC_PAD_SOURCE_OF */ + format = &ccdc->formats[CCDC_PAD_SOURCE_OF]; crop = &ccdc->crop; isp_reg_writel(isp, (crop->left << ISPCCDC_HORZ_INFO_SPH_SHIFT) | @@ -1228,6 +1214,24 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc) ccdc_config_outlineoffset(ccdc, ccdc->video_out.bpl_value, 0, 0); + /* The CCDC outputs data in UYVY order by default. Swap bytes to get + * YUYV. + */ + if (format->code == V4L2_MBUS_FMT_YUYV8_1X16) + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG, + ISPCCDC_CFG_BSWD); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG, + ISPCCDC_CFG_BSWD); + + /* Use PACK8 mode for 1byte per pixel formats. */ + if (omap3isp_video_format_info(format->code)->width <= 8) + syn_mode |= ISPCCDC_SYN_MODE_PACK8; + else + syn_mode &= ~ISPCCDC_SYN_MODE_PACK8; + + isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE); + /* CCDC_PAD_SOURCE_VP */ format = &ccdc->formats[CCDC_PAD_SOURCE_VP]; @@ -1242,6 +1246,7 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc) (format->height << ISPCCDC_VP_OUT_VERT_NUM_SHIFT), OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VP_OUT); + /* Lens shading correction. */ spin_lock_irqsave(&ccdc->lsc.req_lock, flags); if (ccdc->lsc.request == NULL) goto unlock; @@ -1701,7 +1706,7 @@ static long ccdc_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) } static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, - struct v4l2_event_subscription *sub) + const struct v4l2_event_subscription *sub) { if (sub->type != V4L2_EVENT_FRAME_SYNC) return -EINVAL; @@ -1714,7 +1719,7 @@ static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, } static int ccdc_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, - struct v4l2_event_subscription *sub) + const struct v4l2_event_subscription *sub) { return v4l2_event_unsubscribe(fh, sub); } @@ -1819,8 +1824,8 @@ ccdc_try_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh, unsigned int pad, struct v4l2_mbus_framefmt *fmt, enum v4l2_subdev_format_whence which) { - struct v4l2_mbus_framefmt *format; const struct isp_format_info *info; + enum v4l2_mbus_pixelcode pixelcode; unsigned int width = fmt->width; unsigned int height = fmt->height; struct v4l2_rect *crop; @@ -1828,9 +1833,6 @@ ccdc_try_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh, switch (pad) { case CCDC_PAD_SINK: - /* TODO: If the CCDC output formatter pad is connected directly - * to the resizer, only YUV formats can be used. - */ for (i = 0; i < ARRAY_SIZE(ccdc_fmts); i++) { if (fmt->code == ccdc_fmts[i]) break; @@ -1846,8 +1848,26 @@ ccdc_try_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh, break; case CCDC_PAD_SOURCE_OF: - format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SINK, which); - memcpy(fmt, format, sizeof(*fmt)); + pixelcode = fmt->code; + *fmt = *__ccdc_get_format(ccdc, fh, CCDC_PAD_SINK, which); + + /* YUV formats are converted from 2X8 to 1X16 by the bridge and + * can be byte-swapped. + */ + if (fmt->code == V4L2_MBUS_FMT_YUYV8_2X8 || + fmt->code == V4L2_MBUS_FMT_UYVY8_2X8) { + /* Use the user requested format if YUV. */ + if (pixelcode == V4L2_MBUS_FMT_YUYV8_2X8 || + pixelcode == V4L2_MBUS_FMT_UYVY8_2X8 || + pixelcode == V4L2_MBUS_FMT_YUYV8_1X16 || + pixelcode == V4L2_MBUS_FMT_UYVY8_1X16) + fmt->code = pixelcode; + + if (fmt->code == V4L2_MBUS_FMT_YUYV8_2X8) + fmt->code = V4L2_MBUS_FMT_YUYV8_1X16; + else if (fmt->code == V4L2_MBUS_FMT_UYVY8_2X8) + fmt->code = V4L2_MBUS_FMT_UYVY8_1X16; + } /* Hardcode the output size to the crop rectangle size. */ crop = __ccdc_get_crop(ccdc, fh, which); @@ -1856,13 +1876,17 @@ ccdc_try_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh, break; case CCDC_PAD_SOURCE_VP: - format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SINK, which); - memcpy(fmt, format, sizeof(*fmt)); + *fmt = *__ccdc_get_format(ccdc, fh, CCDC_PAD_SINK, which); /* The video port interface truncates the data to 10 bits. */ info = omap3isp_video_format_info(fmt->code); fmt->code = info->truncated; + /* YUV formats are not supported by the video port. */ + if (fmt->code == V4L2_MBUS_FMT_YUYV8_2X8 || + fmt->code == V4L2_MBUS_FMT_UYVY8_2X8) + fmt->code = 0; + /* The number of lines that can be clocked out from the video * port output must be at least one line less than the number * of input lines. @@ -1945,14 +1969,46 @@ static int ccdc_enum_mbus_code(struct v4l2_subdev *sd, break; case CCDC_PAD_SOURCE_OF: + format = __ccdc_get_format(ccdc, fh, code->pad, + V4L2_SUBDEV_FORMAT_TRY); + + if (format->code == V4L2_MBUS_FMT_YUYV8_2X8 || + format->code == V4L2_MBUS_FMT_UYVY8_2X8) { + /* In YUV mode the CCDC can swap bytes. */ + if (code->index == 0) + code->code = V4L2_MBUS_FMT_YUYV8_1X16; + else if (code->index == 1) + code->code = V4L2_MBUS_FMT_UYVY8_1X16; + else + return -EINVAL; + } else { + /* In raw mode, no configurable format confversion is + * available. + */ + if (code->index == 0) + code->code = format->code; + else + return -EINVAL; + } + break; + case CCDC_PAD_SOURCE_VP: - /* No format conversion inside CCDC */ + /* The CCDC supports no configurable format conversion + * compatible with the video port. Enumerate a single output + * format code. + */ if (code->index != 0) return -EINVAL; - format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SINK, + format = __ccdc_get_format(ccdc, fh, code->pad, V4L2_SUBDEV_FORMAT_TRY); + /* A pixel code equal to 0 means that the video port doesn't + * support the input format. Don't enumerate any pixel code. + */ + if (format->code == 0) + return -EINVAL; + code->code = format->code; break; @@ -2182,7 +2238,7 @@ static bool ccdc_is_shiftable(enum v4l2_mbus_pixelcode in, if (in_info->flavor != out_info->flavor) return false; - return in_info->bpp - out_info->bpp + additional_shift <= 6; + return in_info->width - out_info->width + additional_shift <= 6; } static int ccdc_link_validate(struct v4l2_subdev *sd, @@ -2487,14 +2543,6 @@ int omap3isp_ccdc_init(struct isp_device *isp) INIT_LIST_HEAD(&ccdc->lsc.free_queue); spin_lock_init(&ccdc->lsc.req_lock); - ccdc->syncif.ccdc_mastermode = 0; - ccdc->syncif.datapol = 0; - ccdc->syncif.datsz = 0; - ccdc->syncif.fldmode = 0; - ccdc->syncif.fldout = 0; - ccdc->syncif.fldpol = 0; - ccdc->syncif.fldstat = 0; - ccdc->clamp.oblen = 0; ccdc->clamp.dcsubval = 0; diff --git a/drivers/media/video/omap3isp/ispccdc.h b/drivers/media/platform/omap3isp/ispccdc.h similarity index 83% rename from drivers/media/video/omap3isp/ispccdc.h rename to drivers/media/platform/omap3isp/ispccdc.h index 890f6b3a68fd04530bcdd28380f144e0539e1a12..a5da9e19edbf632e5e22bb1920944cec66157b27 100644 --- a/drivers/media/video/omap3isp/ispccdc.h +++ b/drivers/media/platform/omap3isp/ispccdc.h @@ -46,40 +46,6 @@ enum ccdc_input_entity { #define OMAP3ISP_CCDC_NEVENTS 16 -/* - * struct ispccdc_syncif - Structure for Sync Interface between sensor and CCDC - * @ccdc_mastermode: Master mode. 1 - Master, 0 - Slave. - * @fldstat: Field state. 0 - Odd Field, 1 - Even Field. - * @datsz: Data size. - * @fldmode: 0 - Progressive, 1 - Interlaced. - * @datapol: 0 - Positive, 1 - Negative. - * @fldpol: 0 - Positive, 1 - Negative. - * @hdpol: 0 - Positive, 1 - Negative. - * @vdpol: 0 - Positive, 1 - Negative. - * @fldout: 0 - Input, 1 - Output. - * @hs_width: Width of the Horizontal Sync pulse, used for HS/VS Output. - * @vs_width: Width of the Vertical Sync pulse, used for HS/VS Output. - * @ppln: Number of pixels per line, used for HS/VS Output. - * @hlprf: Number of half lines per frame, used for HS/VS Output. - * @bt_r656_en: 1 - Enable ITU-R BT656 mode, 0 - Sync mode. - */ -struct ispccdc_syncif { - u8 ccdc_mastermode; - u8 fldstat; - u8 datsz; - u8 fldmode; - u8 datapol; - u8 fldpol; - u8 hdpol; - u8 vdpol; - u8 fldout; - u8 hs_width; - u8 vs_width; - u8 ppln; - u8 hlprf; - u8 bt_r656_en; -}; - enum ispccdc_lsc_state { LSC_STATE_STOPPED = 0, LSC_STATE_STOPPING = 1, @@ -153,7 +119,6 @@ struct ispccdc_lsc { * @lsc: Lens shading compensation configuration * @update: Bitmask of controls to update during the next interrupt * @shadow_update: Controls update in progress by userspace - * @syncif: Interface synchronization configuration * @underrun: A buffer underrun occurred and a new buffer has been queued * @state: Streaming state * @lock: Serializes shadow_update with interrupt handler @@ -182,8 +147,6 @@ struct isp_ccdc_device { unsigned int update; unsigned int shadow_update; - struct ispccdc_syncif syncif; - unsigned int underrun:1; enum isp_pipeline_stream_state state; spinlock_t lock; diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/platform/omap3isp/ispccp2.c similarity index 100% rename from drivers/media/video/omap3isp/ispccp2.c rename to drivers/media/platform/omap3isp/ispccp2.c diff --git a/drivers/media/video/omap3isp/ispccp2.h b/drivers/media/platform/omap3isp/ispccp2.h similarity index 100% rename from drivers/media/video/omap3isp/ispccp2.h rename to drivers/media/platform/omap3isp/ispccp2.h diff --git a/drivers/media/video/omap3isp/ispcsi2.c b/drivers/media/platform/omap3isp/ispcsi2.c similarity index 98% rename from drivers/media/video/omap3isp/ispcsi2.c rename to drivers/media/platform/omap3isp/ispcsi2.c index a1724362b6d5e039307eeb7849244f43da97a5a0..6a3ff792af7d6a3b07042bc2d7c582b9f9ba5b95 100644 --- a/drivers/media/video/omap3isp/ispcsi2.c +++ b/drivers/media/platform/omap3isp/ispcsi2.c @@ -96,11 +96,12 @@ static const unsigned int csi2_input_fmts[] = { V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, + V4L2_MBUS_FMT_YUYV8_2X8, }; /* To set the format on the CSI2 requires a mapping function that takes * the following inputs: - * - 2 different formats (at this time) + * - 3 different formats (at this time) * - 2 destinations (mem, vp+mem) (vp only handled separately) * - 2 decompression options (on, off) * - 2 isp revisions (certain format must be handled differently on OMAP3630) @@ -108,7 +109,7 @@ static const unsigned int csi2_input_fmts[] = { * Array indices as follows: [format][dest][decompr][is_3630] * Not all combinations are valid. 0 means invalid. */ -static const u16 __csi2_fmt_map[2][2][2][2] = { +static const u16 __csi2_fmt_map[3][2][2][2] = { /* RAW10 formats */ { /* Output to memory */ @@ -147,6 +148,25 @@ static const u16 __csi2_fmt_map[2][2][2][2] = { CSI2_USERDEF_8BIT_DATA1_DPCM10_VP }, }, }, + /* YUYV8 2X8 formats */ + { + /* Output to memory */ + { + /* No DPCM decompression */ + { CSI2_PIX_FMT_YUV422_8BIT, + CSI2_PIX_FMT_YUV422_8BIT }, + /* DPCM decompression */ + { 0, 0 }, + }, + /* Output to both */ + { + /* No DPCM decompression */ + { CSI2_PIX_FMT_YUV422_8BIT_VP, + CSI2_PIX_FMT_YUV422_8BIT_VP }, + /* DPCM decompression */ + { 0, 0 }, + }, + }, }; /* @@ -173,6 +193,9 @@ static u16 csi2_ctx_map_format(struct isp_csi2_device *csi2) case V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8: fmtidx = 1; break; + case V4L2_MBUS_FMT_YUYV8_2X8: + fmtidx = 2; + break; default: WARN(1, KERN_ERR "CSI2: pixel format %08x unsupported!\n", fmt->code); diff --git a/drivers/media/video/omap3isp/ispcsi2.h b/drivers/media/platform/omap3isp/ispcsi2.h similarity index 100% rename from drivers/media/video/omap3isp/ispcsi2.h rename to drivers/media/platform/omap3isp/ispcsi2.h diff --git a/drivers/media/video/omap3isp/ispcsiphy.c b/drivers/media/platform/omap3isp/ispcsiphy.c similarity index 100% rename from drivers/media/video/omap3isp/ispcsiphy.c rename to drivers/media/platform/omap3isp/ispcsiphy.c diff --git a/drivers/media/video/omap3isp/ispcsiphy.h b/drivers/media/platform/omap3isp/ispcsiphy.h similarity index 100% rename from drivers/media/video/omap3isp/ispcsiphy.h rename to drivers/media/platform/omap3isp/ispcsiphy.h diff --git a/drivers/media/video/omap3isp/isph3a.h b/drivers/media/platform/omap3isp/isph3a.h similarity index 100% rename from drivers/media/video/omap3isp/isph3a.h rename to drivers/media/platform/omap3isp/isph3a.h diff --git a/drivers/media/video/omap3isp/isph3a_aewb.c b/drivers/media/platform/omap3isp/isph3a_aewb.c similarity index 96% rename from drivers/media/video/omap3isp/isph3a_aewb.c rename to drivers/media/platform/omap3isp/isph3a_aewb.c index a3c76bf1817585997ebe7dcad9bcdbe3c7345aa1..036e9961d0279a174f075b56dbec29fae1a9ffa3 100644 --- a/drivers/media/video/omap3isp/isph3a_aewb.c +++ b/drivers/media/platform/omap3isp/isph3a_aewb.c @@ -93,17 +93,11 @@ static void h3a_aewb_enable(struct ispstat *aewb, int enable) if (enable) { isp_reg_set(aewb->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR, ISPH3A_PCR_AEW_EN); - /* This bit is already set if AF is enabled */ - if (aewb->isp->isp_af.state != ISPSTAT_ENABLED) - isp_reg_set(aewb->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, - ISPCTRL_H3A_CLK_EN); + omap3isp_subclk_enable(aewb->isp, OMAP3_ISP_SUBCLK_AEWB); } else { isp_reg_clr(aewb->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR, ISPH3A_PCR_AEW_EN); - /* This bit can't be cleared if AF is enabled */ - if (aewb->isp->isp_af.state != ISPSTAT_ENABLED) - isp_reg_clr(aewb->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, - ISPCTRL_H3A_CLK_EN); + omap3isp_subclk_disable(aewb->isp, OMAP3_ISP_SUBCLK_AEWB); } } diff --git a/drivers/media/video/omap3isp/isph3a_af.c b/drivers/media/platform/omap3isp/isph3a_af.c similarity index 96% rename from drivers/media/video/omap3isp/isph3a_af.c rename to drivers/media/platform/omap3isp/isph3a_af.c index 58e0bc41489971a16d47e0afcf6722fc318687dd..42ccce318d5d08adf107953c5662146dc56a9aeb 100644 --- a/drivers/media/video/omap3isp/isph3a_af.c +++ b/drivers/media/platform/omap3isp/isph3a_af.c @@ -143,17 +143,11 @@ static void h3a_af_enable(struct ispstat *af, int enable) if (enable) { isp_reg_set(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR, ISPH3A_PCR_AF_EN); - /* This bit is already set if AEWB is enabled */ - if (af->isp->isp_aewb.state != ISPSTAT_ENABLED) - isp_reg_set(af->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, - ISPCTRL_H3A_CLK_EN); + omap3isp_subclk_enable(af->isp, OMAP3_ISP_SUBCLK_AF); } else { isp_reg_clr(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR, ISPH3A_PCR_AF_EN); - /* This bit can't be cleared if AEWB is enabled */ - if (af->isp->isp_aewb.state != ISPSTAT_ENABLED) - isp_reg_clr(af->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, - ISPCTRL_H3A_CLK_EN); + omap3isp_subclk_disable(af->isp, OMAP3_ISP_SUBCLK_AF); } } diff --git a/drivers/media/video/omap3isp/isphist.c b/drivers/media/platform/omap3isp/isphist.c similarity index 98% rename from drivers/media/video/omap3isp/isphist.c rename to drivers/media/platform/omap3isp/isphist.c index 1163907bcddcb17fcdbb3fb8070d697f0842dc98..d1a8dee5e1ca4720adb96fde8c87e6280187d862 100644 --- a/drivers/media/video/omap3isp/isphist.c +++ b/drivers/media/platform/omap3isp/isphist.c @@ -167,13 +167,11 @@ static void hist_enable(struct ispstat *hist, int enable) if (enable) { isp_reg_set(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_PCR, ISPHIST_PCR_ENABLE); - isp_reg_set(hist->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, - ISPCTRL_HIST_CLK_EN); + omap3isp_subclk_enable(hist->isp, OMAP3_ISP_SUBCLK_HIST); } else { isp_reg_clr(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_PCR, ISPHIST_PCR_ENABLE); - isp_reg_clr(hist->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, - ISPCTRL_HIST_CLK_EN); + omap3isp_subclk_disable(hist->isp, OMAP3_ISP_SUBCLK_HIST); } } diff --git a/drivers/media/video/omap3isp/isphist.h b/drivers/media/platform/omap3isp/isphist.h similarity index 100% rename from drivers/media/video/omap3isp/isphist.h rename to drivers/media/platform/omap3isp/isphist.h diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/platform/omap3isp/isppreview.c similarity index 89% rename from drivers/media/video/omap3isp/isppreview.c rename to drivers/media/platform/omap3isp/isppreview.c index 53f5a703e31abd218692a679cd4b0ccf9b16d98a..1ae1c0909ed1c5f5302dd21982f32ec39f19044e 100644 --- a/drivers/media/video/omap3isp/isppreview.c +++ b/drivers/media/platform/omap3isp/isppreview.c @@ -131,7 +131,7 @@ static struct omap3isp_prev_csc flr_prev_csc = { * CFA Filter Coefficient Table * */ -static u32 cfa_coef_table[] = { +static u32 cfa_coef_table[4][OMAP3ISP_PREV_CFA_BLK_SIZE] = { #include "cfa_coef_table.h" }; @@ -157,85 +157,74 @@ static u32 luma_enhance_table[] = { }; /* - * preview_enable_invalaw - Enable/Disable Inverse A-Law module in Preview. - * @enable: 1 - Reverse the A-Law done in CCDC. + * preview_config_luma_enhancement - Configure the Luminance Enhancement table */ static void -preview_enable_invalaw(struct isp_prev_device *prev, u8 enable) +preview_config_luma_enhancement(struct isp_prev_device *prev, + const struct prev_params *params) { struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_luma *yt = ¶ms->luma; + unsigned int i; - if (enable) - isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW); - else - isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW); + isp_reg_writel(isp, ISPPRV_YENH_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_YENH_TBL_SIZE; i++) { + isp_reg_writel(isp, yt->table[i], + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); + } } /* - * preview_enable_drkframe_capture - Enable/Disable of the darkframe capture. - * @prev - - * @enable: 1 - Enable, 0 - Disable - * - * NOTE: PRV_WSDR_ADDR and PRV_WADD_OFFSET must be set also - * The process is applied for each captured frame. + * preview_enable_luma_enhancement - Enable/disable Luminance Enhancement */ static void -preview_enable_drkframe_capture(struct isp_prev_device *prev, u8 enable) +preview_enable_luma_enhancement(struct isp_prev_device *prev, bool enable) { struct isp_device *isp = to_isp_device(prev); if (enable) isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_DRKFCAP); + ISPPRV_PCR_YNENHEN); else isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_DRKFCAP); + ISPPRV_PCR_YNENHEN); } /* - * preview_enable_drkframe - Enable/Disable of the darkframe subtract. - * @enable: 1 - Acquires memory bandwidth since the pixels in each frame is - * subtracted with the pixels in the current frame. - * - * The process is applied for each captured frame. + * preview_enable_invalaw - Enable/disable Inverse A-Law decompression */ -static void -preview_enable_drkframe(struct isp_prev_device *prev, u8 enable) +static void preview_enable_invalaw(struct isp_prev_device *prev, bool enable) { struct isp_device *isp = to_isp_device(prev); if (enable) isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_DRKFEN); + ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW); else isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_DRKFEN); + ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW); } /* - * preview_config_drkf_shadcomp - Configures shift value in shading comp. - * @scomp_shtval: 3bit value of shift used in shading compensation. + * preview_config_hmed - Configure the Horizontal Median Filter */ -static void -preview_config_drkf_shadcomp(struct isp_prev_device *prev, - const void *scomp_shtval) +static void preview_config_hmed(struct isp_prev_device *prev, + const struct prev_params *params) { struct isp_device *isp = to_isp_device(prev); - const u32 *shtval = scomp_shtval; + const struct omap3isp_prev_hmed *hmed = ¶ms->hmed; - isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_SCOMP_SFT_MASK, - *shtval << ISPPRV_PCR_SCOMP_SFT_SHIFT); + isp_reg_writel(isp, (hmed->odddist == 1 ? 0 : ISPPRV_HMED_ODDDIST) | + (hmed->evendist == 1 ? 0 : ISPPRV_HMED_EVENDIST) | + (hmed->thres << ISPPRV_HMED_THRESHOLD_SHIFT), + OMAP3_ISP_IOMEM_PREV, ISPPRV_HMED); } /* - * preview_enable_hmed - Enables/Disables of the Horizontal Median Filter. - * @enable: 1 - Enables Horizontal Median Filter. + * preview_enable_hmed - Enable/disable the Horizontal Median Filter */ -static void -preview_enable_hmed(struct isp_prev_device *prev, u8 enable) +static void preview_enable_hmed(struct isp_prev_device *prev, bool enable) { struct isp_device *isp = to_isp_device(prev); @@ -248,81 +237,27 @@ preview_enable_hmed(struct isp_prev_device *prev, u8 enable) } /* - * preview_config_hmed - Configures the Horizontal Median Filter. - * @prev_hmed: Structure containing the odd and even distance between the - * pixels in the image along with the filter threshold. - */ -static void -preview_config_hmed(struct isp_prev_device *prev, const void *prev_hmed) -{ - struct isp_device *isp = to_isp_device(prev); - const struct omap3isp_prev_hmed *hmed = prev_hmed; - - isp_reg_writel(isp, (hmed->odddist == 1 ? 0 : ISPPRV_HMED_ODDDIST) | - (hmed->evendist == 1 ? 0 : ISPPRV_HMED_EVENDIST) | - (hmed->thres << ISPPRV_HMED_THRESHOLD_SHIFT), - OMAP3_ISP_IOMEM_PREV, ISPPRV_HMED); -} - -/* - * preview_config_noisefilter - Configures the Noise Filter. - * @prev_nf: Structure containing the noisefilter table, strength to be used - * for the noise filter and the defect correction enable flag. - */ -static void -preview_config_noisefilter(struct isp_prev_device *prev, const void *prev_nf) -{ - struct isp_device *isp = to_isp_device(prev); - const struct omap3isp_prev_nf *nf = prev_nf; - unsigned int i; - - isp_reg_writel(isp, nf->spread, OMAP3_ISP_IOMEM_PREV, ISPPRV_NF); - isp_reg_writel(isp, ISPPRV_NF_TABLE_ADDR, - OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); - for (i = 0; i < OMAP3ISP_PREV_NF_TBL_SIZE; i++) { - isp_reg_writel(isp, nf->table[i], - OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); - } -} - -/* - * preview_config_dcor - Configures the defect correction - * @prev_dcor: Structure containing the defect correct thresholds - */ -static void -preview_config_dcor(struct isp_prev_device *prev, const void *prev_dcor) -{ - struct isp_device *isp = to_isp_device(prev); - const struct omap3isp_prev_dcor *dcor = prev_dcor; - - isp_reg_writel(isp, dcor->detect_correct[0], - OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR0); - isp_reg_writel(isp, dcor->detect_correct[1], - OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR1); - isp_reg_writel(isp, dcor->detect_correct[2], - OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR2); - isp_reg_writel(isp, dcor->detect_correct[3], - OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR3); - isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_DCCOUP, - dcor->couplet_mode_en ? ISPPRV_PCR_DCCOUP : 0); -} - -/* - * preview_config_cfa - Configures the CFA Interpolation parameters. - * @prev_cfa: Structure containing the CFA interpolation table, CFA format - * in the image, vertical and horizontal gradient threshold. - */ -static void -preview_config_cfa(struct isp_prev_device *prev, const void *prev_cfa) -{ + * preview_config_cfa - Configure CFA Interpolation for Bayer formats + * + * The CFA table is organised in four blocks, one per Bayer component. The + * hardware expects blocks to follow the Bayer order of the input data, while + * the driver stores the table in GRBG order in memory. The blocks need to be + * reordered to support non-GRBG Bayer patterns. + */ +static void preview_config_cfa(struct isp_prev_device *prev, + const struct prev_params *params) +{ + static const unsigned int cfa_coef_order[4][4] = { + { 0, 1, 2, 3 }, /* GRBG */ + { 1, 0, 3, 2 }, /* RGGB */ + { 2, 3, 0, 1 }, /* BGGR */ + { 3, 2, 1, 0 }, /* GBRG */ + }; + const unsigned int *order = cfa_coef_order[prev->params.cfa_order]; + const struct omap3isp_prev_cfa *cfa = ¶ms->cfa; struct isp_device *isp = to_isp_device(prev); - const struct omap3isp_prev_cfa *cfa = prev_cfa; unsigned int i; - - isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_CFAFMT_MASK, - cfa->format << ISPPRV_PCR_CFAFMT_SHIFT); + unsigned int j; isp_reg_writel(isp, (cfa->gradthrs_vert << ISPPRV_CFA_GRADTH_VER_SHIFT) | @@ -332,73 +267,24 @@ preview_config_cfa(struct isp_prev_device *prev, const void *prev_cfa) isp_reg_writel(isp, ISPPRV_CFA_TABLE_ADDR, OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); - for (i = 0; i < OMAP3ISP_PREV_CFA_TBL_SIZE; i++) { - isp_reg_writel(isp, cfa->table[i], - OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); - } -} - -/* - * preview_config_gammacorrn - Configures the Gamma Correction table values - * @gtable: Structure containing the table for red, blue, green gamma table. - */ -static void -preview_config_gammacorrn(struct isp_prev_device *prev, const void *gtable) -{ - struct isp_device *isp = to_isp_device(prev); - const struct omap3isp_prev_gtables *gt = gtable; - unsigned int i; - - isp_reg_writel(isp, ISPPRV_REDGAMMA_TABLE_ADDR, - OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); - for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++) - isp_reg_writel(isp, gt->red[i], OMAP3_ISP_IOMEM_PREV, - ISPPRV_SET_TBL_DATA); - - isp_reg_writel(isp, ISPPRV_GREENGAMMA_TABLE_ADDR, - OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); - for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++) - isp_reg_writel(isp, gt->green[i], OMAP3_ISP_IOMEM_PREV, - ISPPRV_SET_TBL_DATA); - - isp_reg_writel(isp, ISPPRV_BLUEGAMMA_TABLE_ADDR, - OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); - for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++) - isp_reg_writel(isp, gt->blue[i], OMAP3_ISP_IOMEM_PREV, - ISPPRV_SET_TBL_DATA); -} - -/* - * preview_config_luma_enhancement - Sets the Luminance Enhancement table. - * @ytable: Structure containing the table for Luminance Enhancement table. - */ -static void -preview_config_luma_enhancement(struct isp_prev_device *prev, - const void *ytable) -{ - struct isp_device *isp = to_isp_device(prev); - const struct omap3isp_prev_luma *yt = ytable; - unsigned int i; + for (i = 0; i < 4; ++i) { + const __u32 *block = cfa->table[order[i]]; - isp_reg_writel(isp, ISPPRV_YENH_TABLE_ADDR, - OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); - for (i = 0; i < OMAP3ISP_PREV_YENH_TBL_SIZE; i++) { - isp_reg_writel(isp, yt->table[i], - OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); + for (j = 0; j < OMAP3ISP_PREV_CFA_BLK_SIZE; ++j) + isp_reg_writel(isp, block[j], OMAP3_ISP_IOMEM_PREV, + ISPPRV_SET_TBL_DATA); } } /* - * preview_config_chroma_suppression - Configures the Chroma Suppression. - * @csup: Structure containing the threshold value for suppression - * and the hypass filter enable flag. + * preview_config_chroma_suppression - Configure Chroma Suppression */ static void preview_config_chroma_suppression(struct isp_prev_device *prev, - const void *csup) + const struct prev_params *params) { struct isp_device *isp = to_isp_device(prev); - const struct omap3isp_prev_csup *cs = csup; + const struct omap3isp_prev_csup *cs = ¶ms->csup; isp_reg_writel(isp, cs->gain | (cs->thres << ISPPRV_CSUP_THRES_SHIFT) | @@ -407,80 +293,10 @@ preview_config_chroma_suppression(struct isp_prev_device *prev, } /* - * preview_enable_noisefilter - Enables/Disables the Noise Filter. - * @enable: 1 - Enables the Noise Filter. - */ -static void -preview_enable_noisefilter(struct isp_prev_device *prev, u8 enable) -{ - struct isp_device *isp = to_isp_device(prev); - - if (enable) - isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_NFEN); - else - isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_NFEN); -} - -/* - * preview_enable_dcor - Enables/Disables the defect correction. - * @enable: 1 - Enables the defect correction. - */ -static void -preview_enable_dcor(struct isp_prev_device *prev, u8 enable) -{ - struct isp_device *isp = to_isp_device(prev); - - if (enable) - isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_DCOREN); - else - isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_DCOREN); -} - -/* - * preview_enable_gammabypass - Enables/Disables the GammaByPass - * @enable: 1 - Bypasses Gamma - 10bit input is cropped to 8MSB. - * 0 - Goes through Gamma Correction. input and output is 10bit. + * preview_enable_chroma_suppression - Enable/disable Chrominance Suppression */ static void -preview_enable_gammabypass(struct isp_prev_device *prev, u8 enable) -{ - struct isp_device *isp = to_isp_device(prev); - - if (enable) - isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_GAMMA_BYPASS); - else - isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_GAMMA_BYPASS); -} - -/* - * preview_enable_luma_enhancement - Enables/Disables Luminance Enhancement - * @enable: 1 - Enable the Luminance Enhancement. - */ -static void -preview_enable_luma_enhancement(struct isp_prev_device *prev, u8 enable) -{ - struct isp_device *isp = to_isp_device(prev); - - if (enable) - isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_YNENHEN); - else - isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_YNENHEN); -} - -/* - * preview_enable_chroma_suppression - Enables/Disables Chrominance Suppr. - * @enable: 1 - Enable the Chrominance Suppression. - */ -static void -preview_enable_chroma_suppression(struct isp_prev_device *prev, u8 enable) +preview_enable_chroma_suppression(struct isp_prev_device *prev, bool enable) { struct isp_device *isp = to_isp_device(prev); @@ -493,17 +309,16 @@ preview_enable_chroma_suppression(struct isp_prev_device *prev, u8 enable) } /* - * preview_config_whitebalance - Configures the White Balance parameters. - * @prev_wbal: Structure containing the digital gain and white balance - * coefficient. + * preview_config_whitebalance - Configure White Balance parameters * * Coefficient matrix always with default values. */ static void -preview_config_whitebalance(struct isp_prev_device *prev, const void *prev_wbal) +preview_config_whitebalance(struct isp_prev_device *prev, + const struct prev_params *params) { struct isp_device *isp = to_isp_device(prev); - const struct omap3isp_prev_wbal *wbal = prev_wbal; + const struct omap3isp_prev_wbal *wbal = ¶ms->wbal; u32 val; isp_reg_writel(isp, wbal->dgain, OMAP3_ISP_IOMEM_PREV, ISPPRV_WB_DGAIN); @@ -535,15 +350,14 @@ preview_config_whitebalance(struct isp_prev_device *prev, const void *prev_wbal) } /* - * preview_config_blkadj - Configures the Black Adjustment parameters. - * @prev_blkadj: Structure containing the black adjustment towards red, green, - * blue. + * preview_config_blkadj - Configure Black Adjustment */ static void -preview_config_blkadj(struct isp_prev_device *prev, const void *prev_blkadj) +preview_config_blkadj(struct isp_prev_device *prev, + const struct prev_params *params) { struct isp_device *isp = to_isp_device(prev); - const struct omap3isp_prev_blkadj *blkadj = prev_blkadj; + const struct omap3isp_prev_blkadj *blkadj = ¶ms->blkadj; isp_reg_writel(isp, (blkadj->blue << ISPPRV_BLKADJOFF_B_SHIFT) | (blkadj->green << ISPPRV_BLKADJOFF_G_SHIFT) | @@ -552,15 +366,14 @@ preview_config_blkadj(struct isp_prev_device *prev, const void *prev_blkadj) } /* - * preview_config_rgb_blending - Configures the RGB-RGB Blending matrix. - * @rgb2rgb: Structure containing the rgb to rgb blending matrix and the rgb - * offset. + * preview_config_rgb_blending - Configure RGB-RGB Blending */ static void -preview_config_rgb_blending(struct isp_prev_device *prev, const void *rgb2rgb) +preview_config_rgb_blending(struct isp_prev_device *prev, + const struct prev_params *params) { struct isp_device *isp = to_isp_device(prev); - const struct omap3isp_prev_rgbtorgb *rgbrgb = rgb2rgb; + const struct omap3isp_prev_rgbtorgb *rgbrgb = ¶ms->rgb2rgb; u32 val; val = (rgbrgb->matrix[0][0] & 0xfff) << ISPPRV_RGB_MAT1_MTX_RR_SHIFT; @@ -591,15 +404,14 @@ preview_config_rgb_blending(struct isp_prev_device *prev, const void *rgb2rgb) } /* - * Configures the color space conversion (RGB toYCbYCr) matrix - * @prev_csc: Structure containing the RGB to YCbYCr matrix and the - * YCbCr offset. + * preview_config_csc - Configure Color Space Conversion (RGB to YCbYCr) */ static void -preview_config_csc(struct isp_prev_device *prev, const void *prev_csc) +preview_config_csc(struct isp_prev_device *prev, + const struct prev_params *params) { struct isp_device *isp = to_isp_device(prev); - const struct omap3isp_prev_csc *csc = prev_csc; + const struct omap3isp_prev_csc *csc = ¶ms->csc; u32 val; val = (csc->matrix[0][0] & 0x3ff) << ISPPRV_CSC0_RY_SHIFT; @@ -623,6 +435,208 @@ preview_config_csc(struct isp_prev_device *prev, const void *prev_csc) isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC_OFFSET); } +/* + * preview_config_yc_range - Configure the max and min Y and C values + */ +static void +preview_config_yc_range(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_yclimit *yc = ¶ms->yclimit; + + isp_reg_writel(isp, + yc->maxC << ISPPRV_SETUP_YC_MAXC_SHIFT | + yc->maxY << ISPPRV_SETUP_YC_MAXY_SHIFT | + yc->minC << ISPPRV_SETUP_YC_MINC_SHIFT | + yc->minY << ISPPRV_SETUP_YC_MINY_SHIFT, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SETUP_YC); +} + +/* + * preview_config_dcor - Configure Couplet Defect Correction + */ +static void +preview_config_dcor(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_dcor *dcor = ¶ms->dcor; + + isp_reg_writel(isp, dcor->detect_correct[0], + OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR0); + isp_reg_writel(isp, dcor->detect_correct[1], + OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR1); + isp_reg_writel(isp, dcor->detect_correct[2], + OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR2); + isp_reg_writel(isp, dcor->detect_correct[3], + OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR3); + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DCCOUP, + dcor->couplet_mode_en ? ISPPRV_PCR_DCCOUP : 0); +} + +/* + * preview_enable_dcor - Enable/disable Couplet Defect Correction + */ +static void preview_enable_dcor(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DCOREN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DCOREN); +} + +/* + * preview_enable_drkframe_capture - Enable/disable Dark Frame Capture + */ +static void +preview_enable_drkframe_capture(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DRKFCAP); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DRKFCAP); +} + +/* + * preview_enable_drkframe - Enable/disable Dark Frame Subtraction + */ +static void preview_enable_drkframe(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DRKFEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DRKFEN); +} + +/* + * preview_config_noisefilter - Configure the Noise Filter + */ +static void +preview_config_noisefilter(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_nf *nf = ¶ms->nf; + unsigned int i; + + isp_reg_writel(isp, nf->spread, OMAP3_ISP_IOMEM_PREV, ISPPRV_NF); + isp_reg_writel(isp, ISPPRV_NF_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_NF_TBL_SIZE; i++) { + isp_reg_writel(isp, nf->table[i], + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); + } +} + +/* + * preview_enable_noisefilter - Enable/disable the Noise Filter + */ +static void +preview_enable_noisefilter(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_NFEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_NFEN); +} + +/* + * preview_config_gammacorrn - Configure the Gamma Correction tables + */ +static void +preview_config_gammacorrn(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_gtables *gt = ¶ms->gamma; + unsigned int i; + + isp_reg_writel(isp, ISPPRV_REDGAMMA_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++) + isp_reg_writel(isp, gt->red[i], OMAP3_ISP_IOMEM_PREV, + ISPPRV_SET_TBL_DATA); + + isp_reg_writel(isp, ISPPRV_GREENGAMMA_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++) + isp_reg_writel(isp, gt->green[i], OMAP3_ISP_IOMEM_PREV, + ISPPRV_SET_TBL_DATA); + + isp_reg_writel(isp, ISPPRV_BLUEGAMMA_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++) + isp_reg_writel(isp, gt->blue[i], OMAP3_ISP_IOMEM_PREV, + ISPPRV_SET_TBL_DATA); +} + +/* + * preview_enable_gammacorrn - Enable/disable Gamma Correction + * + * When gamma correction is disabled, the module is bypassed and its output is + * the 8 MSB of the 10-bit input . + */ +static void +preview_enable_gammacorrn(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_GAMMA_BYPASS); + else + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_GAMMA_BYPASS); +} + +/* + * preview_config_contrast - Configure the Contrast + * + * Value should be programmed before enabling the module. + */ +static void +preview_config_contrast(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT, + 0xff << ISPPRV_CNT_BRT_CNT_SHIFT, + params->contrast << ISPPRV_CNT_BRT_CNT_SHIFT); +} + +/* + * preview_config_brightness - Configure the Brightness + */ +static void +preview_config_brightness(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT, + 0xff << ISPPRV_CNT_BRT_BRT_SHIFT, + params->brightness << ISPPRV_CNT_BRT_BRT_SHIFT); +} + /* * preview_update_contrast - Updates the contrast. * @contrast: Pointer to hold the current programmed contrast value. @@ -646,22 +660,6 @@ preview_update_contrast(struct isp_prev_device *prev, u8 contrast) spin_unlock_irqrestore(&prev->params.lock, flags); } -/* - * preview_config_contrast - Configures the Contrast. - * @params: Contrast value (u8 pointer, U8Q0 format). - * - * Value should be programmed before enabling the module. - */ -static void -preview_config_contrast(struct isp_prev_device *prev, const void *params) -{ - struct isp_device *isp = to_isp_device(prev); - - isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT, - 0xff << ISPPRV_CNT_BRT_CNT_SHIFT, - *(u8 *)params << ISPPRV_CNT_BRT_CNT_SHIFT); -} - /* * preview_update_brightness - Updates the brightness in preview module. * @brightness: Pointer to hold the current programmed brightness value. @@ -684,38 +682,6 @@ preview_update_brightness(struct isp_prev_device *prev, u8 brightness) spin_unlock_irqrestore(&prev->params.lock, flags); } -/* - * preview_config_brightness - Configures the brightness. - * @params: Brightness value (u8 pointer, U8Q0 format). - */ -static void -preview_config_brightness(struct isp_prev_device *prev, const void *params) -{ - struct isp_device *isp = to_isp_device(prev); - - isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT, - 0xff << ISPPRV_CNT_BRT_BRT_SHIFT, - *(u8 *)params << ISPPRV_CNT_BRT_BRT_SHIFT); -} - -/* - * preview_config_yc_range - Configures the max and min Y and C values. - * @yclimit: Structure containing the range of Y and C values. - */ -static void -preview_config_yc_range(struct isp_prev_device *prev, const void *yclimit) -{ - struct isp_device *isp = to_isp_device(prev); - const struct omap3isp_prev_yclimit *yc = yclimit; - - isp_reg_writel(isp, - yc->maxC << ISPPRV_SETUP_YC_MAXC_SHIFT | - yc->maxY << ISPPRV_SETUP_YC_MAXY_SHIFT | - yc->minC << ISPPRV_SETUP_YC_MINC_SHIFT | - yc->minY << ISPPRV_SETUP_YC_MINY_SHIFT, - OMAP3_ISP_IOMEM_PREV, ISPPRV_SETUP_YC); -} - static u32 preview_params_lock(struct isp_prev_device *prev, u32 update, bool shadow) { @@ -787,8 +753,8 @@ static void preview_params_switch(struct isp_prev_device *prev) /* preview parameters update structure */ struct preview_update { - void (*config)(struct isp_prev_device *, const void *); - void (*enable)(struct isp_prev_device *, u8); + void (*config)(struct isp_prev_device *, const struct prev_params *); + void (*enable)(struct isp_prev_device *, bool); unsigned int param_offset; unsigned int param_size; unsigned int config_offset; @@ -860,9 +826,9 @@ static const struct preview_update update_attrs[] = { offsetof(struct prev_params, dcor), FIELD_SIZEOF(struct prev_params, dcor), offsetof(struct omap3isp_prev_update_config, dcor), - }, /* OMAP3ISP_PREV_GAMMABYPASS */ { + }, /* Previously OMAP3ISP_PREV_GAMMABYPASS, not used anymore */ { + NULL, NULL, - preview_enable_gammabypass, }, /* OMAP3ISP_PREV_DRK_FRM_CAPTURE */ { NULL, preview_enable_drkframe_capture, @@ -870,7 +836,7 @@ static const struct preview_update update_attrs[] = { NULL, preview_enable_drkframe, }, /* OMAP3ISP_PREV_LENS_SHADING */ { - preview_config_drkf_shadcomp, + NULL, preview_enable_drkframe, }, /* OMAP3ISP_PREV_NF */ { preview_config_noisefilter, @@ -880,20 +846,18 @@ static const struct preview_update update_attrs[] = { offsetof(struct omap3isp_prev_update_config, nf), }, /* OMAP3ISP_PREV_GAMMA */ { preview_config_gammacorrn, - NULL, + preview_enable_gammacorrn, offsetof(struct prev_params, gamma), FIELD_SIZEOF(struct prev_params, gamma), offsetof(struct omap3isp_prev_update_config, gamma), }, /* OMAP3ISP_PREV_CONTRAST */ { preview_config_contrast, NULL, - offsetof(struct prev_params, contrast), - 0, 0, true, + 0, 0, 0, true, }, /* OMAP3ISP_PREV_BRIGHTNESS */ { preview_config_brightness, NULL, - offsetof(struct prev_params, brightness), - 0, 0, true, + 0, 0, 0, true, }, }; @@ -988,7 +952,6 @@ static void preview_setup_hw(struct isp_prev_device *prev, u32 update, const struct preview_update *attr = &update_attrs[i]; struct prev_params *params; unsigned int bit = 1 << i; - void *param_ptr; if (!(update & bit)) continue; @@ -996,15 +959,13 @@ static void preview_setup_hw(struct isp_prev_device *prev, u32 update, params = &prev->params.params[!(active & bit)]; if (params->features & bit) { - if (attr->config) { - param_ptr = (void *)params + attr->param_offset; - attr->config(prev, param_ptr); - } + if (attr->config) + attr->config(prev, params); if (attr->enable) - attr->enable(prev, 1); + attr->enable(prev, true); } else { if (attr->enable) - attr->enable(prev, 0); + attr->enable(prev, false); } } } @@ -1043,42 +1004,60 @@ preview_config_ycpos(struct isp_prev_device *prev, static void preview_config_averager(struct isp_prev_device *prev, u8 average) { struct isp_device *isp = to_isp_device(prev); - struct prev_params *params; - int reg = 0; - - params = (prev->params.active & OMAP3ISP_PREV_CFA) - ? &prev->params.params[0] : &prev->params.params[1]; - if (params->cfa.format == OMAP3ISP_CFAFMT_BAYER) - reg = ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT | - ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT | - average; - else if (params->cfa.format == OMAP3ISP_CFAFMT_RGBFOVEON) - reg = ISPPRV_AVE_EVENDIST_3 << ISPPRV_AVE_EVENDIST_SHIFT | - ISPPRV_AVE_ODDDIST_3 << ISPPRV_AVE_ODDDIST_SHIFT | - average; - isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE); + isp_reg_writel(isp, ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT | + ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT | + average, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE); } + /* * preview_config_input_format - Configure the input format * @prev: The preview engine * @format: Format on the preview engine sink pad * - * Enable CFA interpolation for Bayer formats and disable it for greyscale - * formats. + * Enable and configure CFA interpolation for Bayer formats and disable it for + * greyscale formats. + * + * The CFA table is organised in four blocks, one per Bayer component. The + * hardware expects blocks to follow the Bayer order of the input data, while + * the driver stores the table in GRBG order in memory. The blocks need to be + * reordered to support non-GRBG Bayer patterns. */ static void preview_config_input_format(struct isp_prev_device *prev, const struct v4l2_mbus_framefmt *format) { struct isp_device *isp = to_isp_device(prev); + struct prev_params *params; - if (format->code != V4L2_MBUS_FMT_Y10_1X10) - isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_CFAEN); - else + switch (format->code) { + case V4L2_MBUS_FMT_SGRBG10_1X10: + prev->params.cfa_order = 0; + break; + case V4L2_MBUS_FMT_SRGGB10_1X10: + prev->params.cfa_order = 1; + break; + case V4L2_MBUS_FMT_SBGGR10_1X10: + prev->params.cfa_order = 2; + break; + case V4L2_MBUS_FMT_SGBRG10_1X10: + prev->params.cfa_order = 3; + break; + default: + /* Disable CFA for non-Bayer formats. */ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_CFAEN); + return; + } + + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_CFAEN); + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_CFAFMT_MASK, ISPPRV_PCR_CFAFMT_BAYER); + + params = (prev->params.active & OMAP3ISP_PREV_CFA) + ? &prev->params.params[0] : &prev->params.params[1]; + + preview_config_cfa(prev, params); } /* @@ -1421,22 +1400,6 @@ static void preview_configure(struct isp_prev_device *prev) active = prev->params.active; spin_unlock_irqrestore(&prev->params.lock, flags); - preview_setup_hw(prev, update, active); - - if (prev->output & PREVIEW_OUTPUT_MEMORY) - isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_SDRPORT); - else - isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_SDRPORT); - - if (prev->output & PREVIEW_OUTPUT_RESIZER) - isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_RSZPORT); - else - isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_RSZPORT); - /* PREV_PAD_SINK */ format = &prev->formats[PREV_PAD_SINK]; @@ -1451,9 +1414,25 @@ static void preview_configure(struct isp_prev_device *prev) preview_config_inlineoffset(prev, ALIGN(format->width, 0x20) * 2); + preview_setup_hw(prev, update, active); + /* PREV_PAD_SOURCE */ format = &prev->formats[PREV_PAD_SOURCE]; + if (prev->output & PREVIEW_OUTPUT_MEMORY) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SDRPORT); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SDRPORT); + + if (prev->output & PREVIEW_OUTPUT_RESIZER) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_RSZPORT); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_RSZPORT); + if (prev->output & PREVIEW_OUTPUT_MEMORY) preview_config_outlineoffset(prev, ALIGN(format->width, 0x10) * 2); diff --git a/drivers/media/video/omap3isp/isppreview.h b/drivers/media/platform/omap3isp/isppreview.h similarity index 99% rename from drivers/media/video/omap3isp/isppreview.h rename to drivers/media/platform/omap3isp/isppreview.h index 6663ab64e4b1bbca413e96c77a9868ff7356a663..f66923407f8c5a90f2a4280201cb21460ad2fab6 100644 --- a/drivers/media/video/omap3isp/isppreview.h +++ b/drivers/media/platform/omap3isp/isppreview.h @@ -144,6 +144,7 @@ struct isp_prev_device { struct isp_video video_out; struct { + unsigned int cfa_order; struct prev_params params[2]; u32 active; spinlock_t lock; diff --git a/drivers/media/video/omap3isp/ispqueue.c b/drivers/media/platform/omap3isp/ispqueue.c similarity index 98% rename from drivers/media/video/omap3isp/ispqueue.c rename to drivers/media/platform/omap3isp/ispqueue.c index 9bebb1e57aab0dac17e8bccbb6e55cf1566661df..15bf3eab2224ab3d835380c4a55b1e83e1269636 100644 --- a/drivers/media/video/omap3isp/ispqueue.c +++ b/drivers/media/platform/omap3isp/ispqueue.c @@ -647,7 +647,7 @@ static int isp_video_queue_alloc(struct isp_video_queue *queue, if (ret < 0) return ret; - /* Bail out of no buffers should be allocated. */ + /* Bail out if no buffers should be allocated. */ if (nbuffers == 0) return 0; @@ -908,13 +908,14 @@ int omap3isp_video_queue_qbuf(struct isp_video_queue *queue, * * This function is intended to be used as a VIDIOC_DQBUF ioctl handler. * - * The v4l2_buffer structure passed from userspace is first sanity tested. If - * sane, the buffer is then processed and added to the main queue and, if the - * queue is streaming, to the IRQ queue. + * Wait until a buffer is ready to be dequeued, remove it from the queue and + * copy its information to the v4l2_buffer structure. * - * Before being enqueued, USERPTR buffers are checked for address changes. If - * the buffer has a different userspace address, the old memory area is unlocked - * and the new memory area is locked. + * If the nonblocking argument is not zero and no buffer is ready, return + * -EAGAIN immediately instead of waiting. + * + * If no buffer has been enqueued, or if the requested buffer type doesn't match + * the queue type, return -EINVAL. */ int omap3isp_video_queue_dqbuf(struct isp_video_queue *queue, struct v4l2_buffer *vbuf, int nonblocking) diff --git a/drivers/media/video/omap3isp/ispqueue.h b/drivers/media/platform/omap3isp/ispqueue.h similarity index 100% rename from drivers/media/video/omap3isp/ispqueue.h rename to drivers/media/platform/omap3isp/ispqueue.h diff --git a/drivers/media/video/omap3isp/ispreg.h b/drivers/media/platform/omap3isp/ispreg.h similarity index 100% rename from drivers/media/video/omap3isp/ispreg.h rename to drivers/media/platform/omap3isp/ispreg.h diff --git a/drivers/media/video/omap3isp/ispresizer.c b/drivers/media/platform/omap3isp/ispresizer.c similarity index 99% rename from drivers/media/video/omap3isp/ispresizer.c rename to drivers/media/platform/omap3isp/ispresizer.c index ae17d917f77b3657ef4553e26ea039768b9bc3e3..d11fb261d53070a131b4a3fbbd6cd2195bb3f574 100644 --- a/drivers/media/video/omap3isp/ispresizer.c +++ b/drivers/media/platform/omap3isp/ispresizer.c @@ -690,7 +690,7 @@ static void resizer_print_status(struct isp_res_device *res) } /* - * resizer_calc_ratios - Helper function for calculate resizer ratios + * resizer_calc_ratios - Helper function for calculating resizer ratios * @res: pointer to resizer private data structure * @input: input frame size * @output: output frame size @@ -734,7 +734,7 @@ static void resizer_print_status(struct isp_res_device *res) * value will still satisfy the original inequality, as b will disappear when * the expression will be shifted right by 8. * - * The reverted the equations thus become + * The reverted equations thus become * * - 8-phase, 4-tap mode * hrsz = ((iw - 7) * 256 + 255 - 16 - 32 * sph) / (ow - 1) @@ -759,7 +759,7 @@ static void resizer_print_status(struct isp_res_device *res) * loop', the smallest of the ratio values will be used, never exceeding the * requested input size. * - * We first clamp the output size according to the hardware capabilitie to avoid + * We first clamp the output size according to the hardware capability to avoid * auto-cropping the input more than required to satisfy the TRM equations. The * minimum output size is achieved with a scaling factor of 1024. It is thus * computed using the 7-tap equations. @@ -1730,6 +1730,8 @@ static int resizer_init_entities(struct isp_res_device *res) if (ret < 0) goto error_video_out; + res->video_out.video.entity.flags |= MEDIA_ENT_FL_DEFAULT; + /* Connect the video nodes to the resizer subdev. */ ret = media_entity_create_link(&res->video_in.video.entity, 0, &res->subdev.entity, RESZ_PAD_SINK, 0); diff --git a/drivers/media/video/omap3isp/ispresizer.h b/drivers/media/platform/omap3isp/ispresizer.h similarity index 100% rename from drivers/media/video/omap3isp/ispresizer.h rename to drivers/media/platform/omap3isp/ispresizer.h diff --git a/drivers/media/video/omap3isp/ispstat.c b/drivers/media/platform/omap3isp/ispstat.c similarity index 99% rename from drivers/media/video/omap3isp/ispstat.c rename to drivers/media/platform/omap3isp/ispstat.c index b8640be692f1aef7f093b6364ddb62c15a881504..d7ac76b5c2aee4d38916057b1757d2366b27b188 100644 --- a/drivers/media/video/omap3isp/ispstat.c +++ b/drivers/media/platform/omap3isp/ispstat.c @@ -1025,7 +1025,7 @@ void omap3isp_stat_dma_isr(struct ispstat *stat) int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev, struct v4l2_fh *fh, - struct v4l2_event_subscription *sub) + const struct v4l2_event_subscription *sub) { struct ispstat *stat = v4l2_get_subdevdata(subdev); @@ -1037,7 +1037,7 @@ int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev, int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev, struct v4l2_fh *fh, - struct v4l2_event_subscription *sub) + const struct v4l2_event_subscription *sub) { return v4l2_event_unsubscribe(fh, sub); } diff --git a/drivers/media/video/omap3isp/ispstat.h b/drivers/media/platform/omap3isp/ispstat.h similarity index 97% rename from drivers/media/video/omap3isp/ispstat.h rename to drivers/media/platform/omap3isp/ispstat.h index 9b7c8654dc8a4cadea05dd1ff629ad35b8ebae85..a6fe653eb237dc171c6aef71f31d62ddc1a30550 100644 --- a/drivers/media/video/omap3isp/ispstat.h +++ b/drivers/media/platform/omap3isp/ispstat.h @@ -147,10 +147,10 @@ int omap3isp_stat_init(struct ispstat *stat, const char *name, void omap3isp_stat_cleanup(struct ispstat *stat); int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev, struct v4l2_fh *fh, - struct v4l2_event_subscription *sub); + const struct v4l2_event_subscription *sub); int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev, struct v4l2_fh *fh, - struct v4l2_event_subscription *sub); + const struct v4l2_event_subscription *sub); int omap3isp_stat_s_stream(struct v4l2_subdev *subdev, int enable); int omap3isp_stat_busy(struct ispstat *stat); diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c similarity index 96% rename from drivers/media/video/omap3isp/ispvideo.c rename to drivers/media/platform/omap3isp/ispvideo.c index b37379d39cdd888c72731377bb49886361b285e8..a0b737fecf138e61413fca9ca6c36443b5b452f4 100644 --- a/drivers/media/video/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -53,67 +53,77 @@ static struct isp_format_info formats[] = { { V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8, - V4L2_PIX_FMT_GREY, 8, }, + V4L2_PIX_FMT_GREY, 8, 1, }, { V4L2_MBUS_FMT_Y10_1X10, V4L2_MBUS_FMT_Y10_1X10, V4L2_MBUS_FMT_Y10_1X10, V4L2_MBUS_FMT_Y8_1X8, - V4L2_PIX_FMT_Y10, 10, }, + V4L2_PIX_FMT_Y10, 10, 2, }, { V4L2_MBUS_FMT_Y12_1X12, V4L2_MBUS_FMT_Y10_1X10, V4L2_MBUS_FMT_Y12_1X12, V4L2_MBUS_FMT_Y8_1X8, - V4L2_PIX_FMT_Y12, 12, }, + V4L2_PIX_FMT_Y12, 12, 2, }, { V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_MBUS_FMT_SBGGR8_1X8, - V4L2_PIX_FMT_SBGGR8, 8, }, + V4L2_PIX_FMT_SBGGR8, 8, 1, }, { V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGBRG8_1X8, - V4L2_PIX_FMT_SGBRG8, 8, }, + V4L2_PIX_FMT_SGBRG8, 8, 1, }, { V4L2_MBUS_FMT_SGRBG8_1X8, V4L2_MBUS_FMT_SGRBG8_1X8, V4L2_MBUS_FMT_SGRBG8_1X8, V4L2_MBUS_FMT_SGRBG8_1X8, - V4L2_PIX_FMT_SGRBG8, 8, }, + V4L2_PIX_FMT_SGRBG8, 8, 1, }, { V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8, - V4L2_PIX_FMT_SRGGB8, 8, }, + V4L2_PIX_FMT_SRGGB8, 8, 1, }, { V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, V4L2_MBUS_FMT_SBGGR10_1X10, 0, - V4L2_PIX_FMT_SBGGR10DPCM8, 8, }, + V4L2_PIX_FMT_SBGGR10DPCM8, 8, 1, }, { V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, V4L2_MBUS_FMT_SGBRG10_1X10, 0, - V4L2_PIX_FMT_SGBRG10DPCM8, 8, }, + V4L2_PIX_FMT_SGBRG10DPCM8, 8, 1, }, { V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, V4L2_MBUS_FMT_SGRBG10_1X10, 0, - V4L2_PIX_FMT_SGRBG10DPCM8, 8, }, + V4L2_PIX_FMT_SGRBG10DPCM8, 8, 1, }, { V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, V4L2_MBUS_FMT_SRGGB10_1X10, 0, - V4L2_PIX_FMT_SRGGB10DPCM8, 8, }, + V4L2_PIX_FMT_SRGGB10DPCM8, 8, 1, }, { V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR8_1X8, - V4L2_PIX_FMT_SBGGR10, 10, }, + V4L2_PIX_FMT_SBGGR10, 10, 2, }, { V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG8_1X8, - V4L2_PIX_FMT_SGBRG10, 10, }, + V4L2_PIX_FMT_SGBRG10, 10, 2, }, { V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG8_1X8, - V4L2_PIX_FMT_SGRBG10, 10, }, + V4L2_PIX_FMT_SGRBG10, 10, 2, }, { V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB8_1X8, - V4L2_PIX_FMT_SRGGB10, 10, }, + V4L2_PIX_FMT_SRGGB10, 10, 2, }, { V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SBGGR8_1X8, - V4L2_PIX_FMT_SBGGR12, 12, }, + V4L2_PIX_FMT_SBGGR12, 12, 2, }, { V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_MBUS_FMT_SGBRG8_1X8, - V4L2_PIX_FMT_SGBRG12, 12, }, + V4L2_PIX_FMT_SGBRG12, 12, 2, }, { V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_MBUS_FMT_SGRBG8_1X8, - V4L2_PIX_FMT_SGRBG12, 12, }, + V4L2_PIX_FMT_SGRBG12, 12, 2, }, { V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SRGGB8_1X8, - V4L2_PIX_FMT_SRGGB12, 12, }, + V4L2_PIX_FMT_SRGGB12, 12, 2, }, { V4L2_MBUS_FMT_UYVY8_1X16, V4L2_MBUS_FMT_UYVY8_1X16, V4L2_MBUS_FMT_UYVY8_1X16, 0, - V4L2_PIX_FMT_UYVY, 16, }, + V4L2_PIX_FMT_UYVY, 16, 2, }, { V4L2_MBUS_FMT_YUYV8_1X16, V4L2_MBUS_FMT_YUYV8_1X16, V4L2_MBUS_FMT_YUYV8_1X16, 0, - V4L2_PIX_FMT_YUYV, 16, }, + V4L2_PIX_FMT_YUYV, 16, 2, }, + { V4L2_MBUS_FMT_UYVY8_2X8, V4L2_MBUS_FMT_UYVY8_2X8, + V4L2_MBUS_FMT_UYVY8_2X8, 0, + V4L2_PIX_FMT_UYVY, 8, 2, }, + { V4L2_MBUS_FMT_YUYV8_2X8, V4L2_MBUS_FMT_YUYV8_2X8, + V4L2_MBUS_FMT_YUYV8_2X8, 0, + V4L2_PIX_FMT_YUYV, 8, 2, }, + /* Empty entry to catch the unsupported pixel code (0) used by the CCDC + * module and avoid NULL pointer dereferences. + */ + { 0, } }; const struct isp_format_info * @@ -161,7 +171,7 @@ static unsigned int isp_video_mbus_to_pix(const struct isp_video *video, if (WARN_ON(i == ARRAY_SIZE(formats))) return 0; - min_bpl = pix->width * ALIGN(formats[i].bpp, 8) / 8; + min_bpl = pix->width * formats[i].bpp; /* Clamp the requested bytes per line value. If the maximum bytes per * line value is zero, the module doesn't support user configurable line @@ -723,7 +733,7 @@ isp_video_try_format(struct file *file, void *fh, struct v4l2_format *format) fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt); if (ret) - return ret == -ENOIOCTLCMD ? -EINVAL : ret; + return ret == -ENOIOCTLCMD ? -ENOTTY : ret; isp_video_mbus_to_pix(video, &fmt.format, &format->fmt.pix); return 0; @@ -744,7 +754,7 @@ isp_video_cropcap(struct file *file, void *fh, struct v4l2_cropcap *cropcap) ret = v4l2_subdev_call(subdev, video, cropcap, cropcap); mutex_unlock(&video->mutex); - return ret == -ENOIOCTLCMD ? -EINVAL : ret; + return ret == -ENOIOCTLCMD ? -ENOTTY : ret; } static int @@ -771,7 +781,7 @@ isp_video_get_crop(struct file *file, void *fh, struct v4l2_crop *crop) format.which = V4L2_SUBDEV_FORMAT_ACTIVE; ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &format); if (ret < 0) - return ret == -ENOIOCTLCMD ? -EINVAL : ret; + return ret == -ENOIOCTLCMD ? -ENOTTY : ret; crop->c.left = 0; crop->c.top = 0; @@ -796,7 +806,7 @@ isp_video_set_crop(struct file *file, void *fh, struct v4l2_crop *crop) ret = v4l2_subdev_call(subdev, video, s_crop, crop); mutex_unlock(&video->mutex); - return ret == -ENOIOCTLCMD ? -EINVAL : ret; + return ret == -ENOIOCTLCMD ? -ENOTTY : ret; } static int @@ -921,7 +931,8 @@ static int isp_video_check_external_subdevs(struct isp_video *video, return ret; } - pipe->external_bpp = omap3isp_video_format_info(fmt.format.code)->bpp; + pipe->external_width = + omap3isp_video_format_info(fmt.format.code)->width; memset(&ctrls, 0, sizeof(ctrls)); memset(&ctrl, 0, sizeof(ctrl)); @@ -1331,6 +1342,7 @@ int omap3isp_video_init(struct isp_video *video, const char *name) case V4L2_BUF_TYPE_VIDEO_OUTPUT: direction = "input"; video->pad.flags = MEDIA_PAD_FL_SOURCE; + video->video.vfl_dir = VFL_DIR_TX; break; default: diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/platform/omap3isp/ispvideo.h similarity index 97% rename from drivers/media/video/omap3isp/ispvideo.h rename to drivers/media/platform/omap3isp/ispvideo.h index 5acc909500ec0c52db0537201c88d01b2ca612d7..1ad470ec2b9d5ab5f4cd212f11d0b3d412d93b20 100644 --- a/drivers/media/video/omap3isp/ispvideo.h +++ b/drivers/media/platform/omap3isp/ispvideo.h @@ -51,7 +51,8 @@ struct v4l2_pix_format; * @flavor: V4L2 media bus format code for the same pixel layout but * shifted to be 8 bits per pixel. =0 if format is not shiftable. * @pixelformat: V4L2 pixel format FCC identifier - * @bpp: Bits per pixel + * @width: Bits per pixel (when transferred over a bus) + * @bpp: Bytes per pixel (when stored in memory) */ struct isp_format_info { enum v4l2_mbus_pixelcode code; @@ -59,6 +60,7 @@ struct isp_format_info { enum v4l2_mbus_pixelcode uncompressed; enum v4l2_mbus_pixelcode flavor; u32 pixelformat; + unsigned int width; unsigned int bpp; }; @@ -106,7 +108,7 @@ struct isp_pipeline { struct v4l2_fract max_timeperframe; struct v4l2_subdev *external; unsigned int external_rate; - unsigned int external_bpp; + unsigned int external_width; }; #define to_isp_pipeline(__e) \ diff --git a/drivers/media/video/omap3isp/luma_enhance_table.h b/drivers/media/platform/omap3isp/luma_enhance_table.h similarity index 100% rename from drivers/media/video/omap3isp/luma_enhance_table.h rename to drivers/media/platform/omap3isp/luma_enhance_table.h diff --git a/drivers/media/video/omap3isp/noise_filter_table.h b/drivers/media/platform/omap3isp/noise_filter_table.h similarity index 100% rename from drivers/media/video/omap3isp/noise_filter_table.h rename to drivers/media/platform/omap3isp/noise_filter_table.h diff --git a/drivers/media/video/s5p-fimc/Kconfig b/drivers/media/platform/s5p-fimc/Kconfig similarity index 100% rename from drivers/media/video/s5p-fimc/Kconfig rename to drivers/media/platform/s5p-fimc/Kconfig diff --git a/drivers/media/video/s5p-fimc/Makefile b/drivers/media/platform/s5p-fimc/Makefile similarity index 100% rename from drivers/media/video/s5p-fimc/Makefile rename to drivers/media/platform/s5p-fimc/Makefile diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/platform/s5p-fimc/fimc-capture.c similarity index 98% rename from drivers/media/video/s5p-fimc/fimc-capture.c rename to drivers/media/platform/s5p-fimc/fimc-capture.c index 40923885977ae9618d857bda2e2bc31a1f98ee35..dded988152206e779c3f49844d5ade4a09f14663 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/platform/s5p-fimc/fimc-capture.c @@ -50,9 +50,9 @@ static int fimc_capture_hw_init(struct fimc_dev *fimc) fimc_prepare_dma_offset(ctx, &ctx->d_frame); fimc_set_yuv_order(ctx); - fimc_hw_set_camera_polarity(fimc, sensor->pdata); - fimc_hw_set_camera_type(fimc, sensor->pdata); - fimc_hw_set_camera_source(fimc, sensor->pdata); + fimc_hw_set_camera_polarity(fimc, &sensor->pdata); + fimc_hw_set_camera_type(fimc, &sensor->pdata); + fimc_hw_set_camera_source(fimc, &sensor->pdata); fimc_hw_set_camera_offset(fimc, &ctx->s_frame); ret = fimc_set_scaler_info(ctx); @@ -118,7 +118,8 @@ static int fimc_capture_state_cleanup(struct fimc_dev *fimc, bool suspend) spin_unlock_irqrestore(&fimc->slock, flags); if (streaming) - return fimc_pipeline_s_stream(&fimc->pipeline, 0); + return fimc_pipeline_call(fimc, set_stream, + &fimc->pipeline, 0); else return 0; } @@ -264,7 +265,8 @@ static int start_streaming(struct vb2_queue *q, unsigned int count) fimc_activate_capture(ctx); if (!test_and_set_bit(ST_CAPT_ISP_STREAM, &fimc->state)) - fimc_pipeline_s_stream(&fimc->pipeline, 1); + fimc_pipeline_call(fimc, set_stream, + &fimc->pipeline, 1); } return 0; @@ -288,7 +290,7 @@ int fimc_capture_suspend(struct fimc_dev *fimc) int ret = fimc_stop_capture(fimc, suspend); if (ret) return ret; - return fimc_pipeline_shutdown(&fimc->pipeline); + return fimc_pipeline_call(fimc, close, &fimc->pipeline); } static void buffer_queue(struct vb2_buffer *vb); @@ -304,8 +306,8 @@ int fimc_capture_resume(struct fimc_dev *fimc) INIT_LIST_HEAD(&fimc->vid_cap.active_buf_q); vid_cap->buf_index = 0; - fimc_pipeline_initialize(&fimc->pipeline, &vid_cap->vfd.entity, - false); + fimc_pipeline_call(fimc, open, &fimc->pipeline, + &vid_cap->vfd.entity, false); fimc_capture_hw_init(fimc); clear_bit(ST_CAPT_SUSPENDED, &fimc->state); @@ -422,7 +424,8 @@ static void buffer_queue(struct vb2_buffer *vb) spin_unlock_irqrestore(&fimc->slock, flags); if (!test_and_set_bit(ST_CAPT_ISP_STREAM, &fimc->state)) - fimc_pipeline_s_stream(&fimc->pipeline, 1); + fimc_pipeline_call(fimc, set_stream, + &fimc->pipeline, 1); return; } spin_unlock_irqrestore(&fimc->slock, flags); @@ -472,7 +475,7 @@ int fimc_capture_ctrls_create(struct fimc_dev *fimc) return ret; return v4l2_ctrl_add_handler(&vid_cap->ctx->ctrls.handler, - fimc->pipeline.subdevs[IDX_SENSOR]->ctrl_handler); + fimc->pipeline.subdevs[IDX_SENSOR]->ctrl_handler, NULL); } static int fimc_capture_set_default_format(struct fimc_dev *fimc); @@ -502,8 +505,8 @@ static int fimc_capture_open(struct file *file) } if (++fimc->vid_cap.refcnt == 1) { - ret = fimc_pipeline_initialize(&fimc->pipeline, - &fimc->vid_cap.vfd.entity, true); + ret = fimc_pipeline_call(fimc, open, &fimc->pipeline, + &fimc->vid_cap.vfd.entity, true); if (!ret && !fimc->vid_cap.user_subdev_api) ret = fimc_capture_set_default_format(fimc); @@ -536,7 +539,7 @@ static int fimc_capture_close(struct file *file) if (--fimc->vid_cap.refcnt == 0) { clear_bit(ST_CAPT_BUSY, &fimc->state); fimc_stop_capture(fimc, false); - fimc_pipeline_shutdown(&fimc->pipeline); + fimc_pipeline_call(fimc, close, &fimc->pipeline); clear_bit(ST_CAPT_SUSPENDED, &fimc->state); } @@ -1593,7 +1596,7 @@ static int fimc_register_capture_device(struct fimc_dev *fimc, struct vb2_queue *q; int ret = -ENOMEM; - ctx = kzalloc(sizeof *ctx, GFP_KERNEL); + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/platform/s5p-fimc/fimc-core.c similarity index 100% rename from drivers/media/video/s5p-fimc/fimc-core.c rename to drivers/media/platform/s5p-fimc/fimc-core.c diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/platform/s5p-fimc/fimc-core.h similarity index 99% rename from drivers/media/video/s5p-fimc/fimc-core.h rename to drivers/media/platform/s5p-fimc/fimc-core.h index d3a3a00321c3d868d484c565fed2a87ab684c950..cd716ba6015f6e5c441c84a4fe34627f1121ee47 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.h +++ b/drivers/media/platform/s5p-fimc/fimc-core.h @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include @@ -440,6 +440,7 @@ struct fimc_dev { unsigned long state; struct vb2_alloc_ctx *alloc_ctx; struct fimc_pipeline pipeline; + const struct fimc_pipeline_ops *pipeline_ops; }; /** diff --git a/drivers/media/video/s5p-fimc/fimc-lite-reg.c b/drivers/media/platform/s5p-fimc/fimc-lite-reg.c similarity index 97% rename from drivers/media/video/s5p-fimc/fimc-lite-reg.c rename to drivers/media/platform/s5p-fimc/fimc-lite-reg.c index 09dc71e477dfb97c707fad3345175e0da5e0605c..a22d7eb05c828b56f6083bd8782be258d98a8443 100644 --- a/drivers/media/video/s5p-fimc/fimc-lite-reg.c +++ b/drivers/media/platform/s5p-fimc/fimc-lite-reg.c @@ -118,9 +118,9 @@ static const u32 src_pixfmt_map[8][3] = { FLITE_REG_CIGCTRL_YUV422_1P }, { V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CRYCBY, FLITE_REG_CIGCTRL_YUV422_1P }, - { V4L2_PIX_FMT_SGRBG8, 0, FLITE_REG_CIGCTRL_RAW8 }, - { V4L2_PIX_FMT_SGRBG10, 0, FLITE_REG_CIGCTRL_RAW10 }, - { V4L2_PIX_FMT_SGRBG12, 0, FLITE_REG_CIGCTRL_RAW12 }, + { V4L2_MBUS_FMT_SGRBG8_1X8, 0, FLITE_REG_CIGCTRL_RAW8 }, + { V4L2_MBUS_FMT_SGRBG10_1X10, 0, FLITE_REG_CIGCTRL_RAW10 }, + { V4L2_MBUS_FMT_SGRBG12_1X12, 0, FLITE_REG_CIGCTRL_RAW12 }, { V4L2_MBUS_FMT_JPEG_1X8, 0, FLITE_REG_CIGCTRL_USER(1) }, }; diff --git a/drivers/media/video/s5p-fimc/fimc-lite-reg.h b/drivers/media/platform/s5p-fimc/fimc-lite-reg.h similarity index 100% rename from drivers/media/video/s5p-fimc/fimc-lite-reg.h rename to drivers/media/platform/s5p-fimc/fimc-lite-reg.h diff --git a/drivers/media/video/s5p-fimc/fimc-lite.c b/drivers/media/platform/s5p-fimc/fimc-lite.c similarity index 98% rename from drivers/media/video/s5p-fimc/fimc-lite.c rename to drivers/media/platform/s5p-fimc/fimc-lite.c index 928900842715e9110b932340eb0187af8f4ad725..70bcf39de87994f99dc38ae11c1a2c115d56433d 100644 --- a/drivers/media/video/s5p-fimc/fimc-lite.c +++ b/drivers/media/platform/s5p-fimc/fimc-lite.c @@ -28,9 +28,11 @@ #include #include #include +#include #include "fimc-mdevice.h" #include "fimc-core.h" +#include "fimc-lite.h" #include "fimc-lite-reg.h" static int debug; @@ -133,7 +135,7 @@ static int fimc_lite_hw_init(struct fimc_lite *fimc) sensor = v4l2_get_subdev_hostdata(pipeline->subdevs[IDX_SENSOR]); spin_lock_irqsave(&fimc->slock, flags); - flite_hw_set_camera_bus(fimc, sensor->pdata); + flite_hw_set_camera_bus(fimc, &sensor->pdata); flite_hw_set_source_format(fimc, &fimc->inp_frame); flite_hw_set_window_offset(fimc, &fimc->inp_frame); flite_hw_set_output_dma(fimc, &fimc->out_frame, true); @@ -193,7 +195,7 @@ static int fimc_lite_reinit(struct fimc_lite *fimc, bool suspend) if (!streaming) return 0; - return fimc_pipeline_s_stream(&fimc->pipeline, 0); + return fimc_pipeline_call(fimc, set_stream, &fimc->pipeline, 0); } static int fimc_lite_stop_capture(struct fimc_lite *fimc, bool suspend) @@ -307,7 +309,8 @@ static int start_streaming(struct vb2_queue *q, unsigned int count) flite_hw_capture_start(fimc); if (!test_and_set_bit(ST_SENSOR_STREAM, &fimc->state)) - fimc_pipeline_s_stream(&fimc->pipeline, 1); + fimc_pipeline_call(fimc, set_stream, + &fimc->pipeline, 1); } if (debug > 0) flite_hw_dump_regs(fimc, __func__); @@ -411,7 +414,8 @@ static void buffer_queue(struct vb2_buffer *vb) spin_unlock_irqrestore(&fimc->slock, flags); if (!test_and_set_bit(ST_SENSOR_STREAM, &fimc->state)) - fimc_pipeline_s_stream(&fimc->pipeline, 1); + fimc_pipeline_call(fimc, set_stream, + &fimc->pipeline, 1); return; } spin_unlock_irqrestore(&fimc->slock, flags); @@ -466,8 +470,8 @@ static int fimc_lite_open(struct file *file) goto done; if (++fimc->ref_count == 1 && fimc->out_path == FIMC_IO_DMA) { - ret = fimc_pipeline_initialize(&fimc->pipeline, - &fimc->vfd.entity, true); + ret = fimc_pipeline_call(fimc, open, &fimc->pipeline, + &fimc->vfd.entity, true); if (ret < 0) { pm_runtime_put_sync(&fimc->pdev->dev); fimc->ref_count--; @@ -493,7 +497,7 @@ static int fimc_lite_close(struct file *file) if (--fimc->ref_count == 0 && fimc->out_path == FIMC_IO_DMA) { clear_bit(ST_FLITE_IN_USE, &fimc->state); fimc_lite_stop_capture(fimc, false); - fimc_pipeline_shutdown(&fimc->pipeline); + fimc_pipeline_call(fimc, close, &fimc->pipeline); clear_bit(ST_FLITE_SUSPENDED, &fimc->state); } @@ -825,7 +829,7 @@ static int fimc_lite_reqbufs(struct file *file, void *priv, reqbufs->count = max_t(u32, FLITE_REQ_BUFS_MIN, reqbufs->count); ret = vb2_reqbufs(&fimc->vb_queue, reqbufs); - if (!ret < 0) + if (!ret) fimc->reqbufs_count = reqbufs->count; return ret; @@ -1064,6 +1068,7 @@ static int fimc_lite_subdev_set_fmt(struct v4l2_subdev *sd, struct fimc_lite *fimc = v4l2_get_subdevdata(sd); struct v4l2_mbus_framefmt *mf = &fmt->format; struct flite_frame *sink = &fimc->inp_frame; + struct flite_frame *source = &fimc->out_frame; const struct fimc_fmt *ffmt; v4l2_dbg(1, debug, sd, "pad%d: code: 0x%x, %dx%d", @@ -1097,8 +1102,10 @@ static int fimc_lite_subdev_set_fmt(struct v4l2_subdev *sd, sink->rect.height = mf->height; sink->rect.left = 0; sink->rect.top = 0; - /* Reset source crop rectangle */ - fimc->out_frame.rect = sink->rect; + /* Reset source format and crop rectangle */ + source->rect = sink->rect; + source->f_width = mf->width; + source->f_height = mf->height; } else { /* Allow changing format only on sink pad */ mf->code = fimc->fmt->mbus_code; @@ -1505,7 +1512,8 @@ static int fimc_lite_resume(struct device *dev) return 0; INIT_LIST_HEAD(&fimc->active_buf_q); - fimc_pipeline_initialize(&fimc->pipeline, &fimc->vfd.entity, false); + fimc_pipeline_call(fimc, open, &fimc->pipeline, + &fimc->vfd.entity, false); fimc_lite_hw_init(fimc); clear_bit(ST_FLITE_SUSPENDED, &fimc->state); @@ -1531,7 +1539,7 @@ static int fimc_lite_suspend(struct device *dev) if (ret < 0 || !fimc_lite_active(fimc)) return ret; - return fimc_pipeline_shutdown(&fimc->pipeline); + return fimc_pipeline_call(fimc, close, &fimc->pipeline); } #endif /* CONFIG_PM_SLEEP */ diff --git a/drivers/media/video/s5p-fimc/fimc-lite.h b/drivers/media/platform/s5p-fimc/fimc-lite.h similarity index 97% rename from drivers/media/video/s5p-fimc/fimc-lite.h rename to drivers/media/platform/s5p-fimc/fimc-lite.h index 9944dd36ec7c9288597f91d3f9e0629f4301f240..3081db35c5b0bfd60001f1e92483c22241adf1b7 100644 --- a/drivers/media/video/s5p-fimc/fimc-lite.h +++ b/drivers/media/platform/s5p-fimc/fimc-lite.h @@ -9,7 +9,7 @@ #ifndef FIMC_LITE_H_ #define FIMC_LITE_H_ -#include +#include #include #include #include @@ -108,6 +108,7 @@ struct flite_buffer { * @test_pattern: test pattern controls * @index: FIMC-LITE platform device index * @pipeline: video capture pipeline data structure + * @pipeline_ops: media pipeline ops for the video node driver * @slock: spinlock protecting this data structure and the hw registers * @lock: mutex serializing video device and the subdev operations * @clock: FIMC-LITE gate clock @@ -142,6 +143,7 @@ struct fimc_lite { struct v4l2_ctrl *test_pattern; u32 index; struct fimc_pipeline pipeline; + const struct fimc_pipeline_ops *pipeline_ops; struct mutex lock; spinlock_t slock; diff --git a/drivers/media/video/s5p-fimc/fimc-m2m.c b/drivers/media/platform/s5p-fimc/fimc-m2m.c similarity index 99% rename from drivers/media/video/s5p-fimc/fimc-m2m.c rename to drivers/media/platform/s5p-fimc/fimc-m2m.c index 293e602677f07da3c9407a74663f7cd995bf6df1..6b71d953fd15b1a533f90a39d0eb0b9ed112b17c 100644 --- a/drivers/media/video/s5p-fimc/fimc-m2m.c +++ b/drivers/media/platform/s5p-fimc/fimc-m2m.c @@ -551,7 +551,7 @@ static int fimc_m2m_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr) return 0; } -static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr) +static int fimc_m2m_s_crop(struct file *file, void *fh, const struct v4l2_crop *cr) { struct fimc_ctx *ctx = fh_to_ctx(fh); struct fimc_dev *fimc = ctx->fimc_dev; @@ -620,7 +620,6 @@ static int queue_init(void *priv, struct vb2_queue *src_vq, struct fimc_ctx *ctx = priv; int ret; - memset(src_vq, 0, sizeof(*src_vq)); src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; src_vq->io_modes = VB2_MMAP | VB2_USERPTR; src_vq->drv_priv = ctx; @@ -632,7 +631,6 @@ static int queue_init(void *priv, struct vb2_queue *src_vq, if (ret) return ret; - memset(dst_vq, 0, sizeof(*dst_vq)); dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; dst_vq->io_modes = VB2_MMAP | VB2_USERPTR; dst_vq->drv_priv = ctx; @@ -661,7 +659,7 @@ static int fimc_m2m_open(struct file *file) if (fimc->vid_cap.refcnt > 0) goto unlock; - ctx = kzalloc(sizeof *ctx, GFP_KERNEL); + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); if (!ctx) { ret = -ENOMEM; goto unlock; @@ -796,6 +794,7 @@ int fimc_register_m2m_device(struct fimc_dev *fimc, vfd->minor = -1; vfd->release = video_device_release_empty; vfd->lock = &fimc->lock; + vfd->vfl_dir = VFL_DIR_M2M; snprintf(vfd->name, sizeof(vfd->name), "fimc.%d.m2m", fimc->id); video_set_drvdata(vfd, fimc); diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.c b/drivers/media/platform/s5p-fimc/fimc-mdevice.c similarity index 93% rename from drivers/media/video/s5p-fimc/fimc-mdevice.c rename to drivers/media/platform/s5p-fimc/fimc-mdevice.c index e2aa8d99d8584fb34ce0e5182892720d53e1363b..80ada5882f62c8156c74265a7279eca9e6fbc35c 100644 --- a/drivers/media/video/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/platform/s5p-fimc/fimc-mdevice.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "fimc-core.h" #include "fimc-lite.h" @@ -38,7 +39,8 @@ static int __fimc_md_set_camclk(struct fimc_md *fmd, * * Caller holds the graph mutex. */ -void fimc_pipeline_prepare(struct fimc_pipeline *p, struct media_entity *me) +static void fimc_pipeline_prepare(struct fimc_pipeline *p, + struct media_entity *me) { struct media_pad *pad = &me->pads[0]; struct v4l2_subdev *sd; @@ -114,7 +116,7 @@ static int __subdev_set_power(struct v4l2_subdev *sd, int on) * * Needs to be called with the graph mutex held. */ -int fimc_pipeline_s_power(struct fimc_pipeline *p, bool state) +static int fimc_pipeline_s_power(struct fimc_pipeline *p, bool state) { unsigned int i; int ret; @@ -134,15 +136,15 @@ int fimc_pipeline_s_power(struct fimc_pipeline *p, bool state) } /** - * __fimc_pipeline_initialize - update the pipeline information, enable power - * of all pipeline subdevs and the sensor clock + * __fimc_pipeline_open - update the pipeline information, enable power + * of all pipeline subdevs and the sensor clock * @me: media entity to start graph walk with * @prep: true to acquire sensor (and csis) subdevs * * This function must be called with the graph mutex held. */ -static int __fimc_pipeline_initialize(struct fimc_pipeline *p, - struct media_entity *me, bool prep) +static int __fimc_pipeline_open(struct fimc_pipeline *p, + struct media_entity *me, bool prep) { int ret; @@ -159,28 +161,27 @@ static int __fimc_pipeline_initialize(struct fimc_pipeline *p, return fimc_pipeline_s_power(p, 1); } -int fimc_pipeline_initialize(struct fimc_pipeline *p, struct media_entity *me, - bool prep) +static int fimc_pipeline_open(struct fimc_pipeline *p, + struct media_entity *me, bool prep) { int ret; mutex_lock(&me->parent->graph_mutex); - ret = __fimc_pipeline_initialize(p, me, prep); + ret = __fimc_pipeline_open(p, me, prep); mutex_unlock(&me->parent->graph_mutex); return ret; } -EXPORT_SYMBOL_GPL(fimc_pipeline_initialize); /** - * __fimc_pipeline_shutdown - disable the sensor clock and pipeline power + * __fimc_pipeline_close - disable the sensor clock and pipeline power * @fimc: fimc device terminating the pipeline * * Disable power of all subdevs in the pipeline and turn off the external * sensor clock. * Called with the graph mutex held. */ -static int __fimc_pipeline_shutdown(struct fimc_pipeline *p) +static int __fimc_pipeline_close(struct fimc_pipeline *p) { int ret = 0; @@ -191,7 +192,7 @@ static int __fimc_pipeline_shutdown(struct fimc_pipeline *p) return ret == -ENXIO ? 0 : ret; } -int fimc_pipeline_shutdown(struct fimc_pipeline *p) +static int fimc_pipeline_close(struct fimc_pipeline *p) { struct media_entity *me; int ret; @@ -201,12 +202,11 @@ int fimc_pipeline_shutdown(struct fimc_pipeline *p) me = &p->subdevs[IDX_SENSOR]->entity; mutex_lock(&me->parent->graph_mutex); - ret = __fimc_pipeline_shutdown(p); + ret = __fimc_pipeline_close(p); mutex_unlock(&me->parent->graph_mutex); return ret; } -EXPORT_SYMBOL_GPL(fimc_pipeline_shutdown); /** * fimc_pipeline_s_stream - invoke s_stream on pipeline subdevs @@ -232,7 +232,13 @@ int fimc_pipeline_s_stream(struct fimc_pipeline *p, bool on) return 0; } -EXPORT_SYMBOL_GPL(fimc_pipeline_s_stream); + +/* Media pipeline operations for the FIMC/FIMC-LITE video device driver */ +static const struct fimc_pipeline_ops fimc_pipeline_ops = { + .open = fimc_pipeline_open, + .close = fimc_pipeline_close, + .set_stream = fimc_pipeline_s_stream, +}; /* * Sensor subdevice helper functions @@ -246,27 +252,27 @@ static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd, if (!s_info || !fmd) return NULL; - adapter = i2c_get_adapter(s_info->pdata->i2c_bus_num); + adapter = i2c_get_adapter(s_info->pdata.i2c_bus_num); if (!adapter) { v4l2_warn(&fmd->v4l2_dev, "Failed to get I2C adapter %d, deferring probe\n", - s_info->pdata->i2c_bus_num); + s_info->pdata.i2c_bus_num); return ERR_PTR(-EPROBE_DEFER); } sd = v4l2_i2c_new_subdev_board(&fmd->v4l2_dev, adapter, - s_info->pdata->board_info, NULL); + s_info->pdata.board_info, NULL); if (IS_ERR_OR_NULL(sd)) { i2c_put_adapter(adapter); v4l2_warn(&fmd->v4l2_dev, "Failed to acquire subdev %s, deferring probe\n", - s_info->pdata->board_info->type); + s_info->pdata.board_info->type); return ERR_PTR(-EPROBE_DEFER); } v4l2_set_subdev_hostdata(sd, s_info); sd->grp_id = SENSOR_GROUP_ID; v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice %s\n", - s_info->pdata->board_info->type); + s_info->pdata.board_info->type); return sd; } @@ -310,7 +316,7 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd) for (i = 0; i < num_clients; i++) { struct v4l2_subdev *sd; - fmd->sensor[i].pdata = &pdata->isp_info[i]; + fmd->sensor[i].pdata = pdata->isp_info[i]; ret = __fimc_md_set_camclk(fmd, &fmd->sensor[i], true); if (ret) break; @@ -347,6 +353,7 @@ static int fimc_register_callback(struct device *dev, void *p) if (fimc->pdev->id < 0 || fimc->pdev->id >= FIMC_MAX_DEVS) return 0; + fimc->pipeline_ops = &fimc_pipeline_ops; fmd->fimc[fimc->pdev->id] = fimc; sd->grp_id = FIMC_GROUP_ID; @@ -372,6 +379,7 @@ static int fimc_lite_register_callback(struct device *dev, void *p) if (fimc->index >= FIMC_LITE_MAX_DEVS) return 0; + fimc->pipeline_ops = &fimc_pipeline_ops; fmd->fimc_lite[fimc->index] = fimc; sd->grp_id = FLITE_GROUP_ID; @@ -473,12 +481,14 @@ static void fimc_md_unregister_entities(struct fimc_md *fmd) if (fmd->fimc[i] == NULL) continue; v4l2_device_unregister_subdev(&fmd->fimc[i]->vid_cap.subdev); + fmd->fimc[i]->pipeline_ops = NULL; fmd->fimc[i] = NULL; } for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) { if (fmd->fimc_lite[i] == NULL) continue; v4l2_device_unregister_subdev(&fmd->fimc_lite[i]->subdev); + fmd->fimc[i]->pipeline_ops = NULL; fmd->fimc_lite[i] = NULL; } for (i = 0; i < CSIS_MAX_ENTITIES; i++) { @@ -631,11 +641,11 @@ static int fimc_md_create_links(struct fimc_md *fmd) sensor = fmd->sensor[i].subdev; s_info = v4l2_get_subdev_hostdata(sensor); - if (!s_info || !s_info->pdata) + if (!s_info) continue; source = NULL; - pdata = s_info->pdata; + pdata = &s_info->pdata; switch (pdata->bus_type) { case FIMC_MIPI_CSI2: @@ -747,7 +757,7 @@ static int __fimc_md_set_camclk(struct fimc_md *fmd, struct fimc_sensor_info *s_info, bool on) { - struct s5p_fimc_isp_info *pdata = s_info->pdata; + struct s5p_fimc_isp_info *pdata = &s_info->pdata; struct fimc_camclk_info *camclk; int ret = 0; @@ -832,7 +842,7 @@ static int fimc_md_link_notify(struct media_pad *source, } if (!(flags & MEDIA_LNK_FL_ENABLED)) { - ret = __fimc_pipeline_shutdown(pipeline); + ret = __fimc_pipeline_close(pipeline); pipeline->subdevs[IDX_SENSOR] = NULL; pipeline->subdevs[IDX_CSIS] = NULL; @@ -851,8 +861,8 @@ static int fimc_md_link_notify(struct media_pad *source, if (fimc) { mutex_lock(&fimc->lock); if (fimc->vid_cap.refcnt > 0) { - ret = __fimc_pipeline_initialize(pipeline, - source->entity, true); + ret = __fimc_pipeline_open(pipeline, + source->entity, true); if (!ret) ret = fimc_capture_ctrls_create(fimc); } @@ -860,8 +870,8 @@ static int fimc_md_link_notify(struct media_pad *source, } else { mutex_lock(&fimc_lite->lock); if (fimc_lite->ref_count > 0) { - ret = __fimc_pipeline_initialize(pipeline, - source->entity, true); + ret = __fimc_pipeline_open(pipeline, + source->entity, true); } mutex_unlock(&fimc_lite->lock); } diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.h b/drivers/media/platform/s5p-fimc/fimc-mdevice.h similarity index 88% rename from drivers/media/video/s5p-fimc/fimc-mdevice.h rename to drivers/media/platform/s5p-fimc/fimc-mdevice.h index d310d9cc3e1a0e2eb2ba08f44158eec7d8058098..2d8d41d8262042c156d834d24b8649cff0f268b1 100644 --- a/drivers/media/video/s5p-fimc/fimc-mdevice.h +++ b/drivers/media/platform/s5p-fimc/fimc-mdevice.h @@ -51,7 +51,7 @@ struct fimc_camclk_info { * This data structure applies to image sensor and the writeback subdevs. */ struct fimc_sensor_info { - struct s5p_fimc_isp_info *pdata; + struct s5p_fimc_isp_info pdata; struct v4l2_subdev *subdev; struct fimc_dev *host; }; @@ -108,11 +108,5 @@ static inline void fimc_md_graph_unlock(struct fimc_dev *fimc) } int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on); -void fimc_pipeline_prepare(struct fimc_pipeline *p, struct media_entity *me); -int fimc_pipeline_initialize(struct fimc_pipeline *p, struct media_entity *me, - bool resume); -int fimc_pipeline_shutdown(struct fimc_pipeline *p); -int fimc_pipeline_s_power(struct fimc_pipeline *p, bool state); -int fimc_pipeline_s_stream(struct fimc_pipeline *p, bool state); #endif diff --git a/drivers/media/video/s5p-fimc/fimc-reg.c b/drivers/media/platform/s5p-fimc/fimc-reg.c similarity index 100% rename from drivers/media/video/s5p-fimc/fimc-reg.c rename to drivers/media/platform/s5p-fimc/fimc-reg.c diff --git a/drivers/media/video/s5p-fimc/fimc-reg.h b/drivers/media/platform/s5p-fimc/fimc-reg.h similarity index 100% rename from drivers/media/video/s5p-fimc/fimc-reg.h rename to drivers/media/platform/s5p-fimc/fimc-reg.h diff --git a/drivers/media/video/s5p-fimc/mipi-csis.c b/drivers/media/platform/s5p-fimc/mipi-csis.c similarity index 82% rename from drivers/media/video/s5p-fimc/mipi-csis.c rename to drivers/media/platform/s5p-fimc/mipi-csis.c index 2f73d9e3d0b771e49314dfbf4d7a4e38c07755cd..8e4eed8414bd3e3e69b5b67562caaa738be11abc 100644 --- a/drivers/media/video/s5p-fimc/mipi-csis.c +++ b/drivers/media/platform/s5p-fimc/mipi-csis.c @@ -31,7 +31,7 @@ static int debug; module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Debug level (0-1)"); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); /* Register map definition */ @@ -60,10 +60,38 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); #define S5PCSIS_CFG_FMT_MASK (0x3f << 2) #define S5PCSIS_CFG_NR_LANE_MASK 3 -/* Interrupt mask. */ +/* Interrupt mask */ #define S5PCSIS_INTMSK 0x10 -#define S5PCSIS_INTMSK_EN_ALL 0xf000003f +#define S5PCSIS_INTMSK_EN_ALL 0xf000103f +#define S5PCSIS_INTMSK_EVEN_BEFORE (1 << 31) +#define S5PCSIS_INTMSK_EVEN_AFTER (1 << 30) +#define S5PCSIS_INTMSK_ODD_BEFORE (1 << 29) +#define S5PCSIS_INTMSK_ODD_AFTER (1 << 28) +#define S5PCSIS_INTMSK_ERR_SOT_HS (1 << 12) +#define S5PCSIS_INTMSK_ERR_LOST_FS (1 << 5) +#define S5PCSIS_INTMSK_ERR_LOST_FE (1 << 4) +#define S5PCSIS_INTMSK_ERR_OVER (1 << 3) +#define S5PCSIS_INTMSK_ERR_ECC (1 << 2) +#define S5PCSIS_INTMSK_ERR_CRC (1 << 1) +#define S5PCSIS_INTMSK_ERR_UNKNOWN (1 << 0) + +/* Interrupt source */ #define S5PCSIS_INTSRC 0x14 +#define S5PCSIS_INTSRC_EVEN_BEFORE (1 << 31) +#define S5PCSIS_INTSRC_EVEN_AFTER (1 << 30) +#define S5PCSIS_INTSRC_EVEN (0x3 << 30) +#define S5PCSIS_INTSRC_ODD_BEFORE (1 << 29) +#define S5PCSIS_INTSRC_ODD_AFTER (1 << 28) +#define S5PCSIS_INTSRC_ODD (0x3 << 28) +#define S5PCSIS_INTSRC_NON_IMAGE_DATA (0xff << 28) +#define S5PCSIS_INTSRC_ERR_SOT_HS (0xf << 12) +#define S5PCSIS_INTSRC_ERR_LOST_FS (1 << 5) +#define S5PCSIS_INTSRC_ERR_LOST_FE (1 << 4) +#define S5PCSIS_INTSRC_ERR_OVER (1 << 3) +#define S5PCSIS_INTSRC_ERR_ECC (1 << 2) +#define S5PCSIS_INTSRC_ERR_CRC (1 << 1) +#define S5PCSIS_INTSRC_ERR_UNKNOWN (1 << 0) +#define S5PCSIS_INTSRC_ERRORS 0xf03f /* Pixel resolution */ #define S5PCSIS_RESOL 0x2c @@ -93,6 +121,29 @@ enum { ST_SUSPENDED = 4, }; +struct s5pcsis_event { + u32 mask; + const char * const name; + unsigned int counter; +}; + +static const struct s5pcsis_event s5pcsis_events[] = { + /* Errors */ + { S5PCSIS_INTSRC_ERR_SOT_HS, "SOT Error" }, + { S5PCSIS_INTSRC_ERR_LOST_FS, "Lost Frame Start Error" }, + { S5PCSIS_INTSRC_ERR_LOST_FE, "Lost Frame End Error" }, + { S5PCSIS_INTSRC_ERR_OVER, "FIFO Overflow Error" }, + { S5PCSIS_INTSRC_ERR_ECC, "ECC Error" }, + { S5PCSIS_INTSRC_ERR_CRC, "CRC Error" }, + { S5PCSIS_INTSRC_ERR_UNKNOWN, "Unknown Error" }, + /* Non-image data receive events */ + { S5PCSIS_INTSRC_EVEN_BEFORE, "Non-image data before even frame" }, + { S5PCSIS_INTSRC_EVEN_AFTER, "Non-image data after even frame" }, + { S5PCSIS_INTSRC_ODD_BEFORE, "Non-image data before odd frame" }, + { S5PCSIS_INTSRC_ODD_AFTER, "Non-image data after odd frame" }, +}; +#define S5PCSIS_NUM_EVENTS ARRAY_SIZE(s5pcsis_events) + /** * struct csis_state - the driver's internal state data structure * @lock: mutex serializing the subdev and power management operations, @@ -101,11 +152,14 @@ enum { * @sd: v4l2_subdev associated with CSIS device instance * @pdev: CSIS platform device * @regs: mmaped I/O registers memory + * @supplies: CSIS regulator supplies * @clock: CSIS clocks * @irq: requested s5p-mipi-csis irq number * @flags: the state variable for power and streaming control * @csis_fmt: current CSIS pixel format * @format: common media bus format for the source and sink pad + * @slock: spinlock protecting structure members below + * @events: MIPI-CSIS event (error) counters */ struct csis_state { struct mutex lock; @@ -119,6 +173,9 @@ struct csis_state { u32 flags; const struct csis_pix_format *csis_fmt; struct v4l2_mbus_framefmt format; + + struct spinlock slock; + struct s5pcsis_event events[S5PCSIS_NUM_EVENTS]; }; /** @@ -292,17 +349,6 @@ static int s5pcsis_clk_get(struct csis_state *state) return -ENXIO; } -static int s5pcsis_s_power(struct v4l2_subdev *sd, int on) -{ - struct csis_state *state = sd_to_csis_state(sd); - struct device *dev = &state->pdev->dev; - - if (on) - return pm_runtime_get_sync(dev); - - return pm_runtime_put_sync(dev); -} - static void s5pcsis_start_stream(struct csis_state *state) { s5pcsis_reset(state); @@ -317,7 +363,47 @@ static void s5pcsis_stop_stream(struct csis_state *state) s5pcsis_system_enable(state, false); } -/* v4l2_subdev operations */ +static void s5pcsis_clear_counters(struct csis_state *state) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&state->slock, flags); + for (i = 0; i < S5PCSIS_NUM_EVENTS; i++) + state->events[i].counter = 0; + spin_unlock_irqrestore(&state->slock, flags); +} + +static void s5pcsis_log_counters(struct csis_state *state, bool non_errors) +{ + int i = non_errors ? S5PCSIS_NUM_EVENTS : S5PCSIS_NUM_EVENTS - 4; + unsigned long flags; + + spin_lock_irqsave(&state->slock, flags); + + for (i--; i >= 0; i--) + if (state->events[i].counter >= 0) + v4l2_info(&state->sd, "%s events: %d\n", + state->events[i].name, + state->events[i].counter); + + spin_unlock_irqrestore(&state->slock, flags); +} + +/* + * V4L2 subdev operations + */ +static int s5pcsis_s_power(struct v4l2_subdev *sd, int on) +{ + struct csis_state *state = sd_to_csis_state(sd); + struct device *dev = &state->pdev->dev; + + if (on) + return pm_runtime_get_sync(dev); + + return pm_runtime_put_sync(dev); +} + static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable) { struct csis_state *state = sd_to_csis_state(sd); @@ -327,10 +413,12 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable) __func__, enable, state->flags); if (enable) { + s5pcsis_clear_counters(state); ret = pm_runtime_get_sync(&state->pdev->dev); if (ret && ret != 1) return ret; } + mutex_lock(&state->lock); if (enable) { if (state->flags & ST_SUSPENDED) { @@ -342,6 +430,8 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable) } else { s5pcsis_stop_stream(state); state->flags &= ~ST_STREAMING; + if (debug > 0) + s5pcsis_log_counters(state, true); } unlock: mutex_unlock(&state->lock); @@ -439,6 +529,14 @@ static int s5pcsis_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, return 0; } +static int s5pcsis_log_status(struct v4l2_subdev *sd) +{ + struct csis_state *state = sd_to_csis_state(sd); + + s5pcsis_log_counters(state, true); + return 0; +} + static int s5pcsis_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) { struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0); @@ -458,6 +556,7 @@ static const struct v4l2_subdev_internal_ops s5pcsis_sd_internal_ops = { static struct v4l2_subdev_core_ops s5pcsis_core_ops = { .s_power = s5pcsis_s_power, + .log_status = s5pcsis_log_status, }; static struct v4l2_subdev_pad_ops s5pcsis_pad_ops = { @@ -479,12 +578,29 @@ static struct v4l2_subdev_ops s5pcsis_subdev_ops = { static irqreturn_t s5pcsis_irq_handler(int irq, void *dev_id) { struct csis_state *state = dev_id; - u32 val; - - /* Just clear the interrupt pending bits. */ - val = s5pcsis_read(state, S5PCSIS_INTSRC); - s5pcsis_write(state, S5PCSIS_INTSRC, val); + unsigned long flags; + u32 status; + + status = s5pcsis_read(state, S5PCSIS_INTSRC); + + spin_lock_irqsave(&state->slock, flags); + + /* Update the event/error counters */ + if ((status & S5PCSIS_INTSRC_ERRORS) || debug) { + int i; + for (i = 0; i < S5PCSIS_NUM_EVENTS; i++) { + if (!(status & state->events[i].mask)) + continue; + state->events[i].counter++; + v4l2_dbg(2, debug, &state->sd, "%s: %d\n", + state->events[i].name, + state->events[i].counter); + } + v4l2_dbg(2, debug, &state->sd, "status: %08x\n", status); + } + spin_unlock_irqrestore(&state->slock, flags); + s5pcsis_write(state, S5PCSIS_INTSRC, status); return IRQ_HANDLED; } @@ -501,6 +617,8 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev) return -ENOMEM; mutex_init(&state->lock); + spin_lock_init(&state->slock); + state->pdev = pdev; pdata = pdev->dev.platform_data; @@ -577,6 +695,8 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev) /* .. and a pointer to the subdev. */ platform_set_drvdata(pdev, &state->sd); + memcpy(state->events, s5pcsis_events, sizeof(state->events)); + pm_runtime_enable(&pdev->dev); return 0; diff --git a/drivers/media/video/s5p-fimc/mipi-csis.h b/drivers/media/platform/s5p-fimc/mipi-csis.h similarity index 100% rename from drivers/media/video/s5p-fimc/mipi-csis.h rename to drivers/media/platform/s5p-fimc/mipi-csis.h diff --git a/drivers/media/video/s5p-g2d/Makefile b/drivers/media/platform/s5p-g2d/Makefile similarity index 100% rename from drivers/media/video/s5p-g2d/Makefile rename to drivers/media/platform/s5p-g2d/Makefile diff --git a/drivers/media/video/s5p-g2d/g2d-hw.c b/drivers/media/platform/s5p-g2d/g2d-hw.c similarity index 100% rename from drivers/media/video/s5p-g2d/g2d-hw.c rename to drivers/media/platform/s5p-g2d/g2d-hw.c diff --git a/drivers/media/video/s5p-g2d/g2d-regs.h b/drivers/media/platform/s5p-g2d/g2d-regs.h similarity index 100% rename from drivers/media/video/s5p-g2d/g2d-regs.h rename to drivers/media/platform/s5p-g2d/g2d-regs.h diff --git a/drivers/media/video/s5p-g2d/g2d.c b/drivers/media/platform/s5p-g2d/g2d.c similarity index 96% rename from drivers/media/video/s5p-g2d/g2d.c rename to drivers/media/platform/s5p-g2d/g2d.c index 7c22004352068ffeec6493b2594710ad184438e5..1e3b9dd014c094655d7e5b6719c60d06c48d49a8 100644 --- a/drivers/media/video/s5p-g2d/g2d.c +++ b/drivers/media/platform/s5p-g2d/g2d.c @@ -151,7 +151,6 @@ static int queue_init(void *priv, struct vb2_queue *src_vq, struct g2d_ctx *ctx = priv; int ret; - memset(src_vq, 0, sizeof(*src_vq)); src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; src_vq->io_modes = VB2_MMAP | VB2_USERPTR; src_vq->drv_priv = ctx; @@ -163,7 +162,6 @@ static int queue_init(void *priv, struct vb2_queue *src_vq, if (ret) return ret; - memset(dst_vq, 0, sizeof(*dst_vq)); dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; dst_vq->io_modes = VB2_MMAP | VB2_USERPTR; dst_vq->drv_priv = ctx; @@ -248,9 +246,14 @@ static int g2d_open(struct file *file) ctx->in = def_frame; ctx->out = def_frame; + if (mutex_lock_interruptible(&dev->mutex)) { + kfree(ctx); + return -ERESTARTSYS; + } ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init); if (IS_ERR(ctx->m2m_ctx)) { ret = PTR_ERR(ctx->m2m_ctx); + mutex_unlock(&dev->mutex); kfree(ctx); return ret; } @@ -264,6 +267,7 @@ static int g2d_open(struct file *file) v4l2_ctrl_handler_setup(&ctx->ctrl_handler); ctx->fh.ctrl_handler = &ctx->ctrl_handler; + mutex_unlock(&dev->mutex); v4l2_info(&dev->v4l2_dev, "instance opened\n"); return 0; @@ -406,13 +410,26 @@ static int vidioc_s_fmt(struct file *file, void *prv, struct v4l2_format *f) static unsigned int g2d_poll(struct file *file, struct poll_table_struct *wait) { struct g2d_ctx *ctx = fh2ctx(file->private_data); - return v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + struct g2d_dev *dev = ctx->dev; + unsigned int res; + + mutex_lock(&dev->mutex); + res = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + mutex_unlock(&dev->mutex); + return res; } static int g2d_mmap(struct file *file, struct vm_area_struct *vma) { struct g2d_ctx *ctx = fh2ctx(file->private_data); - return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + struct g2d_dev *dev = ctx->dev; + int ret; + + if (mutex_lock_interruptible(&dev->mutex)) + return -ERESTARTSYS; + ret = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + mutex_unlock(&dev->mutex); + return ret; } static int vidioc_reqbufs(struct file *file, void *priv, @@ -509,7 +526,7 @@ static int vidioc_try_crop(struct file *file, void *prv, struct v4l2_crop *cr) return 0; } -static int vidioc_s_crop(struct file *file, void *prv, struct v4l2_crop *cr) +static int vidioc_s_crop(struct file *file, void *prv, const struct v4l2_crop *cr) { struct g2d_ctx *ctx = prv; struct g2d_frame *f; @@ -663,6 +680,7 @@ static struct video_device g2d_videodev = { .ioctl_ops = &g2d_ioctl_ops, .minor = -1, .release = video_device_release, + .vfl_dir = VFL_DIR_M2M, }; static struct v4l2_m2m_ops g2d_m2m_ops = { @@ -753,10 +771,6 @@ static int g2d_probe(struct platform_device *pdev) goto unreg_v4l2_dev; } *vfd = g2d_videodev; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vfd->flags); vfd->lock = &dev->mutex; ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); if (ret) { diff --git a/drivers/media/video/s5p-g2d/g2d.h b/drivers/media/platform/s5p-g2d/g2d.h similarity index 100% rename from drivers/media/video/s5p-g2d/g2d.h rename to drivers/media/platform/s5p-g2d/g2d.h diff --git a/drivers/media/video/s5p-jpeg/Makefile b/drivers/media/platform/s5p-jpeg/Makefile similarity index 100% rename from drivers/media/video/s5p-jpeg/Makefile rename to drivers/media/platform/s5p-jpeg/Makefile diff --git a/drivers/media/video/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c similarity index 98% rename from drivers/media/video/s5p-jpeg/jpeg-core.c rename to drivers/media/platform/s5p-jpeg/jpeg-core.c index 813b801238d1f72e910ab8eea63feeb586b477bb..394775ae5774f4d21d98719c3afae2343b658466 100644 --- a/drivers/media/video/s5p-jpeg/jpeg-core.c +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c @@ -1,4 +1,4 @@ -/* linux/drivers/media/video/s5p-jpeg/jpeg-core.c +/* linux/drivers/media/platform/s5p-jpeg/jpeg-core.c * * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -288,10 +288,15 @@ static int s5p_jpeg_open(struct file *file) struct s5p_jpeg_fmt *out_fmt; int ret = 0; - ctx = kzalloc(sizeof *ctx, GFP_KERNEL); + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; + if (mutex_lock_interruptible(&jpeg->lock)) { + ret = -ERESTARTSYS; + goto free; + } + v4l2_fh_init(&ctx->fh, vfd); /* Use separate control handler per file handle */ ctx->fh.ctrl_handler = &ctx->ctrl_handler; @@ -319,20 +324,26 @@ static int s5p_jpeg_open(struct file *file) ctx->out_q.fmt = out_fmt; ctx->cap_q.fmt = s5p_jpeg_find_format(ctx->mode, V4L2_PIX_FMT_YUYV); + mutex_unlock(&jpeg->lock); return 0; error: v4l2_fh_del(&ctx->fh); v4l2_fh_exit(&ctx->fh); + mutex_unlock(&jpeg->lock); +free: kfree(ctx); return ret; } static int s5p_jpeg_release(struct file *file) { + struct s5p_jpeg *jpeg = video_drvdata(file); struct s5p_jpeg_ctx *ctx = fh_to_ctx(file->private_data); + mutex_lock(&jpeg->lock); v4l2_m2m_ctx_release(ctx->m2m_ctx); + mutex_unlock(&jpeg->lock); v4l2_ctrl_handler_free(&ctx->ctrl_handler); v4l2_fh_del(&ctx->fh); v4l2_fh_exit(&ctx->fh); @@ -344,16 +355,27 @@ static int s5p_jpeg_release(struct file *file) static unsigned int s5p_jpeg_poll(struct file *file, struct poll_table_struct *wait) { + struct s5p_jpeg *jpeg = video_drvdata(file); struct s5p_jpeg_ctx *ctx = fh_to_ctx(file->private_data); + unsigned int res; - return v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + mutex_lock(&jpeg->lock); + res = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); + mutex_unlock(&jpeg->lock); + return res; } static int s5p_jpeg_mmap(struct file *file, struct vm_area_struct *vma) { + struct s5p_jpeg *jpeg = video_drvdata(file); struct s5p_jpeg_ctx *ctx = fh_to_ctx(file->private_data); + int ret; - return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + if (mutex_lock_interruptible(&jpeg->lock)) + return -ERESTARTSYS; + ret = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); + mutex_unlock(&jpeg->lock); + return ret; } static const struct v4l2_file_operations s5p_jpeg_fops = { @@ -1201,7 +1223,6 @@ static int queue_init(void *priv, struct vb2_queue *src_vq, struct s5p_jpeg_ctx *ctx = priv; int ret; - memset(src_vq, 0, sizeof(*src_vq)); src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; src_vq->io_modes = VB2_MMAP | VB2_USERPTR; src_vq->drv_priv = ctx; @@ -1213,7 +1234,6 @@ static int queue_init(void *priv, struct vb2_queue *src_vq, if (ret) return ret; - memset(dst_vq, 0, sizeof(*dst_vq)); dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; dst_vq->io_modes = VB2_MMAP | VB2_USERPTR; dst_vq->drv_priv = ctx; @@ -1372,10 +1392,7 @@ static int s5p_jpeg_probe(struct platform_device *pdev) jpeg->vfd_encoder->release = video_device_release; jpeg->vfd_encoder->lock = &jpeg->lock; jpeg->vfd_encoder->v4l2_dev = &jpeg->v4l2_dev; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &jpeg->vfd_encoder->flags); + jpeg->vfd_encoder->vfl_dir = VFL_DIR_M2M; ret = video_register_device(jpeg->vfd_encoder, VFL_TYPE_GRABBER, -1); if (ret) { @@ -1403,10 +1420,6 @@ static int s5p_jpeg_probe(struct platform_device *pdev) jpeg->vfd_decoder->release = video_device_release; jpeg->vfd_decoder->lock = &jpeg->lock; jpeg->vfd_decoder->v4l2_dev = &jpeg->v4l2_dev; - /* Locking in file operations other than ioctl should be done by the driver, - not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &jpeg->vfd_decoder->flags); ret = video_register_device(jpeg->vfd_decoder, VFL_TYPE_GRABBER, -1); if (ret) { diff --git a/drivers/media/video/s5p-jpeg/jpeg-core.h b/drivers/media/platform/s5p-jpeg/jpeg-core.h similarity index 98% rename from drivers/media/video/s5p-jpeg/jpeg-core.h rename to drivers/media/platform/s5p-jpeg/jpeg-core.h index 9d0cd2b76f619e9d7b0c6321ae0c38b2ddeed28a..022b9b9baff933c9303b7b1be42226137ab5cb64 100644 --- a/drivers/media/video/s5p-jpeg/jpeg-core.h +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.h @@ -1,4 +1,4 @@ -/* linux/drivers/media/video/s5p-jpeg/jpeg-core.h +/* linux/drivers/media/platform/s5p-jpeg/jpeg-core.h * * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/drivers/media/video/s5p-jpeg/jpeg-hw.h b/drivers/media/platform/s5p-jpeg/jpeg-hw.h similarity index 99% rename from drivers/media/video/s5p-jpeg/jpeg-hw.h rename to drivers/media/platform/s5p-jpeg/jpeg-hw.h index f12f0fdbde7c7870b2e9f1c148f9f44d83379981..b47e887b61381c8f952a99d04935d571c410e308 100644 --- a/drivers/media/video/s5p-jpeg/jpeg-hw.h +++ b/drivers/media/platform/s5p-jpeg/jpeg-hw.h @@ -1,4 +1,4 @@ -/* linux/drivers/media/video/s5p-jpeg/jpeg-hw.h +/* linux/drivers/media/platform/s5p-jpeg/jpeg-hw.h * * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/drivers/media/video/s5p-jpeg/jpeg-regs.h b/drivers/media/platform/s5p-jpeg/jpeg-regs.h similarity index 98% rename from drivers/media/video/s5p-jpeg/jpeg-regs.h rename to drivers/media/platform/s5p-jpeg/jpeg-regs.h index 91f4dd5f86dd9d49ac6573eb3796a25df4b875af..38e50815668c23e7616a7b15cb39921962005c3c 100644 --- a/drivers/media/video/s5p-jpeg/jpeg-regs.h +++ b/drivers/media/platform/s5p-jpeg/jpeg-regs.h @@ -1,4 +1,4 @@ -/* linux/drivers/media/video/s5p-jpeg/jpeg-regs.h +/* linux/drivers/media/platform/s5p-jpeg/jpeg-regs.h * * Register definition file for Samsung JPEG codec driver * diff --git a/drivers/media/video/s5p-mfc/Makefile b/drivers/media/platform/s5p-mfc/Makefile similarity index 100% rename from drivers/media/video/s5p-mfc/Makefile rename to drivers/media/platform/s5p-mfc/Makefile diff --git a/drivers/media/video/s5p-mfc/regs-mfc.h b/drivers/media/platform/s5p-mfc/regs-mfc.h similarity index 100% rename from drivers/media/video/s5p-mfc/regs-mfc.h rename to drivers/media/platform/s5p-mfc/regs-mfc.h diff --git a/drivers/media/video/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c similarity index 93% rename from drivers/media/video/s5p-mfc/s5p_mfc.c rename to drivers/media/platform/s5p-mfc/s5p_mfc.c index 9bb68e7b5ae80833b827586fbf09a5642495d050..5587ef15ca4fa3d34a3db0e7fe70039ccbc62fc7 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include "regs-mfc.h" @@ -40,16 +41,49 @@ module_param(debug, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug level - higher value produces more verbose messages"); /* Helper functions for interrupt processing */ + /* Remove from hw execution round robin */ -static void clear_work_bit(struct s5p_mfc_ctx *ctx) +void clear_work_bit(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + + spin_lock(&dev->condlock); + __clear_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock(&dev->condlock); +} + +/* Add to hw execution round robin */ +void set_work_bit(struct s5p_mfc_ctx *ctx) { struct s5p_mfc_dev *dev = ctx->dev; spin_lock(&dev->condlock); - clear_bit(ctx->num, &dev->ctx_work_bits); + __set_bit(ctx->num, &dev->ctx_work_bits); spin_unlock(&dev->condlock); } +/* Remove from hw execution round robin */ +void clear_work_bit_irqsave(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + unsigned long flags; + + spin_lock_irqsave(&dev->condlock, flags); + __clear_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); +} + +/* Add to hw execution round robin */ +void set_work_bit_irqsave(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + unsigned long flags; + + spin_lock_irqsave(&dev->condlock, flags); + __set_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); +} + /* Wake up context wait_queue */ static void wake_up_ctx(struct s5p_mfc_ctx *ctx, unsigned int reason, unsigned int err) @@ -503,9 +537,7 @@ static void s5p_mfc_handle_init_buffers(struct s5p_mfc_ctx *ctx, ctx->int_type = reason; ctx->int_err = err; ctx->int_cond = 1; - spin_lock(&dev->condlock); - clear_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock(&dev->condlock); + clear_work_bit(ctx); if (err == 0) { ctx->state = MFCINST_RUNNING; if (!ctx->dpb_flush_flag) { @@ -539,6 +571,40 @@ static void s5p_mfc_handle_init_buffers(struct s5p_mfc_ctx *ctx, } } +static void s5p_mfc_handle_stream_complete(struct s5p_mfc_ctx *ctx, + unsigned int reason, unsigned int err) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_buf *mb_entry; + + mfc_debug(2, "Stream completed"); + + s5p_mfc_clear_int_flags(dev); + ctx->int_type = reason; + ctx->int_err = err; + ctx->state = MFCINST_FINISHED; + + spin_lock(&dev->irqlock); + if (!list_empty(&ctx->dst_queue)) { + mb_entry = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, + list); + list_del(&mb_entry->list); + ctx->dst_queue_cnt--; + vb2_set_plane_payload(mb_entry->b, 0, 0); + vb2_buffer_done(mb_entry->b, VB2_BUF_STATE_DONE); + } + spin_unlock(&dev->irqlock); + + clear_work_bit(ctx); + + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + WARN_ON(1); + + s5p_mfc_clock_off(); + wake_up(&ctx->queue); + s5p_mfc_try_run(dev); +} + /* Interrupt processing */ static irqreturn_t s5p_mfc_irq(int irq, void *priv) { @@ -614,6 +680,11 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv) case S5P_FIMV_R2H_CMD_INIT_BUFFERS_RET: s5p_mfc_handle_init_buffers(ctx, reason, err); break; + + case S5P_FIMV_R2H_CMD_ENC_COMPLETE_RET: + s5p_mfc_handle_stream_complete(ctx, reason, err); + break; + default: mfc_debug(2, "Unknown int reason\n"); s5p_mfc_clear_int_flags(dev); @@ -641,13 +712,14 @@ static int s5p_mfc_open(struct file *file) struct s5p_mfc_dev *dev = video_drvdata(file); struct s5p_mfc_ctx *ctx = NULL; struct vb2_queue *q; - unsigned long flags; int ret = 0; mfc_debug_enter(); + if (mutex_lock_interruptible(&dev->mfc_mutex)) + return -ERESTARTSYS; dev->num_inst++; /* It is guarded by mfc_mutex in vfd */ /* Allocate memory for context */ - ctx = kzalloc(sizeof *ctx, GFP_KERNEL); + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); if (!ctx) { mfc_err("Not enough memory\n"); ret = -ENOMEM; @@ -672,9 +744,7 @@ static int s5p_mfc_open(struct file *file) } } /* Mark context as idle */ - spin_lock_irqsave(&dev->condlock, flags); - clear_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock_irqrestore(&dev->condlock, flags); + clear_work_bit_irqsave(ctx); dev->ctx[ctx->num] = ctx; if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) { ctx->type = MFCINST_DECODER; @@ -765,6 +835,7 @@ static int s5p_mfc_open(struct file *file) goto err_queue_init; } init_waitqueue_head(&ctx->queue); + mutex_unlock(&dev->mfc_mutex); mfc_debug_leave(); return ret; /* Deinit when failure occured */ @@ -790,6 +861,7 @@ static int s5p_mfc_open(struct file *file) kfree(ctx); err_alloc: dev->num_inst--; + mutex_unlock(&dev->mfc_mutex); mfc_debug_leave(); return ret; } @@ -799,24 +871,20 @@ static int s5p_mfc_release(struct file *file) { struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data); struct s5p_mfc_dev *dev = ctx->dev; - unsigned long flags; mfc_debug_enter(); + mutex_lock(&dev->mfc_mutex); s5p_mfc_clock_on(); vb2_queue_release(&ctx->vq_src); vb2_queue_release(&ctx->vq_dst); /* Mark context as idle */ - spin_lock_irqsave(&dev->condlock, flags); - clear_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock_irqrestore(&dev->condlock, flags); + clear_work_bit_irqsave(ctx); /* If instance was initialised then * return instance and free reosurces */ if (ctx->inst_no != MFC_NO_INSTANCE_SET) { mfc_debug(2, "Has to free instance\n"); ctx->state = MFCINST_RETURN_INST; - spin_lock_irqsave(&dev->condlock, flags); - set_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock_irqrestore(&dev->condlock, flags); + set_work_bit_irqsave(ctx); s5p_mfc_clean_ctx_int_flags(ctx); s5p_mfc_try_run(dev); /* Wait until instance is returned or timeout occured */ @@ -855,6 +923,7 @@ static int s5p_mfc_release(struct file *file) v4l2_fh_exit(&ctx->fh); kfree(ctx); mfc_debug_leave(); + mutex_unlock(&dev->mfc_mutex); return 0; } @@ -869,6 +938,7 @@ static unsigned int s5p_mfc_poll(struct file *file, unsigned int rc = 0; unsigned long flags; + mutex_lock(&dev->mfc_mutex); src_q = &ctx->vq_src; dst_q = &ctx->vq_dst; /* @@ -882,9 +952,12 @@ static unsigned int s5p_mfc_poll(struct file *file, goto end; } mutex_unlock(&dev->mfc_mutex); + poll_wait(file, &ctx->fh.wait, wait); poll_wait(file, &src_q->done_wq, wait); poll_wait(file, &dst_q->done_wq, wait); mutex_lock(&dev->mfc_mutex); + if (v4l2_event_pending(&ctx->fh)) + rc |= POLLPRI; spin_lock_irqsave(&src_q->done_lock, flags); if (!list_empty(&src_q->done_list)) src_vb = list_first_entry(&src_q->done_list, struct vb2_buffer, @@ -902,6 +975,7 @@ static unsigned int s5p_mfc_poll(struct file *file, rc |= POLLIN | POLLRDNORM; spin_unlock_irqrestore(&dst_q->done_lock, flags); end: + mutex_unlock(&dev->mfc_mutex); return rc; } @@ -909,8 +983,12 @@ static unsigned int s5p_mfc_poll(struct file *file, static int s5p_mfc_mmap(struct file *file, struct vm_area_struct *vma) { struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data); + struct s5p_mfc_dev *dev = ctx->dev; unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; int ret; + + if (mutex_lock_interruptible(&dev->mfc_mutex)) + return -ERESTARTSYS; if (offset < DST_QUEUE_OFF_BASE) { mfc_debug(2, "mmaping source\n"); ret = vb2_mmap(&ctx->vq_src, vma); @@ -919,6 +997,7 @@ static int s5p_mfc_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_pgoff -= (DST_QUEUE_OFF_BASE >> PAGE_SHIFT); ret = vb2_mmap(&ctx->vq_dst, vma); } + mutex_unlock(&dev->mfc_mutex); return ret; } @@ -948,7 +1027,7 @@ static int s5p_mfc_probe(struct platform_device *pdev) int ret; pr_debug("%s++\n", __func__); - dev = devm_kzalloc(&pdev->dev, sizeof *dev, GFP_KERNEL); + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); if (!dev) { dev_err(&pdev->dev, "Not enough memory for MFC device\n"); return -ENOMEM; @@ -1034,11 +1113,8 @@ static int s5p_mfc_probe(struct platform_device *pdev) vfd->ioctl_ops = get_dec_v4l2_ioctl_ops(); vfd->release = video_device_release, vfd->lock = &dev->mfc_mutex; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vfd->flags); vfd->v4l2_dev = &dev->v4l2_dev; + vfd->vfl_dir = VFL_DIR_M2M; snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_DEC_NAME); dev->vfd_dec = vfd; ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); @@ -1062,8 +1138,6 @@ static int s5p_mfc_probe(struct platform_device *pdev) vfd->ioctl_ops = get_enc_v4l2_ioctl_ops(); vfd->release = video_device_release, vfd->lock = &dev->mfc_mutex; - /* This should not be necessary */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vfd->flags); vfd->v4l2_dev = &dev->v4l2_dev; snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_ENC_NAME); dev->vfd_enc = vfd; @@ -1141,7 +1215,7 @@ static int s5p_mfc_suspend(struct device *dev) if (m_dev->num_inst == 0) return 0; - return s5p_mfc_sleep(m_dev); + if (test_and_set_bit(0, &m_dev->enter_suspend) != 0) { mfc_err("Error: going to suspend for a second time\n"); return -EIO; @@ -1160,7 +1234,8 @@ static int s5p_mfc_suspend(struct device *dev) return -EIO; } } - return 0; + + return s5p_mfc_sleep(m_dev); } static int s5p_mfc_resume(struct device *dev) diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd.c similarity index 98% rename from drivers/media/video/s5p-mfc/s5p_mfc_cmd.c rename to drivers/media/platform/s5p-mfc/s5p_mfc_cmd.c index f0665ed1a52990391cef749081212de47a394b9e..91a415573bd2a1a19233ef05429c7d632b7f2942 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd.c @@ -1,5 +1,5 @@ /* - * linux/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c + * linux/drivers/media/platform/s5p-mfc/s5p_mfc_cmd.c * * Copyright (C) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd.h similarity index 93% rename from drivers/media/video/s5p-mfc/s5p_mfc_cmd.h rename to drivers/media/platform/s5p-mfc/s5p_mfc_cmd.h index 5ceebfe6131a83b3494f56eafef9fcadedec3eb8..8b090d3723e7d5f8fd2f84a1373c91e4b59379ea 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd.h @@ -1,5 +1,5 @@ /* - * linux/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h + * linux/drivers/media/platform/s5p-mfc/s5p_mfc_cmd.h * * Copyright (C) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h similarity index 98% rename from drivers/media/video/s5p-mfc/s5p_mfc_common.h rename to drivers/media/platform/s5p-mfc/s5p_mfc_common.h index bd5706a6bad18dbd591ab7223a2f748c89430b79..519b0d66d8d1263e52e170e387647ba3962b3fbe 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -146,6 +146,9 @@ enum s5p_mfc_decode_arg { MFC_DEC_RES_CHANGE, }; +#define MFC_BUF_FLAG_USED (1 << 0) +#define MFC_BUF_FLAG_EOS (1 << 1) + struct s5p_mfc_ctx; /** @@ -161,7 +164,7 @@ struct s5p_mfc_buf { } raw; size_t stream; } cookie; - int used; + int flags; }; /** @@ -567,4 +570,9 @@ struct mfc_control { #define ctrl_to_ctx(__ctrl) \ container_of((__ctrl)->handler, struct s5p_mfc_ctx, ctrl_handler) +void clear_work_bit(struct s5p_mfc_ctx *ctx); +void set_work_bit(struct s5p_mfc_ctx *ctx); +void clear_work_bit_irqsave(struct s5p_mfc_ctx *ctx); +void set_work_bit_irqsave(struct s5p_mfc_ctx *ctx); + #endif /* S5P_MFC_COMMON_H_ */ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c similarity index 96% rename from drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c rename to drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c index fd62402490ba3a4fa7a91ed5b06415d7bcd76042..0deba6bc687c7a357ba37ff40de904afb1bebb94 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c @@ -1,5 +1,5 @@ /* - * linux/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c + * linux/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -98,7 +98,11 @@ int s5p_mfc_alloc_and_load_firmware(struct s5p_mfc_dev *dev) release_firmware(fw_blob); return -EIO; } - dev->bank2 = bank2_base_phys; + /* Valid buffers passed to MFC encoder with LAST_FRAME command + * should not have address of bank2 - MFC will treat it as a null frame. + * To avoid such situation we set bank2 address below the pool address. + */ + dev->bank2 = bank2_base_phys - (1 << MFC_BASE_ALIGN_ORDER); memcpy(s5p_mfc_bitproc_virt, fw_blob->data, fw_blob->size); wmb(); release_firmware(fw_blob); diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.h similarity index 93% rename from drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h rename to drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.h index 61dc23b7ee5a8546e374da778d693016525db2fb..e1e0c544b6a2ccb675c6f445ba6ff758dbd54898 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.h @@ -1,5 +1,5 @@ /* - * linux/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h + * linux/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_debug.h b/drivers/media/platform/s5p-mfc/s5p_mfc_debug.h similarity index 95% rename from drivers/media/video/s5p-mfc/s5p_mfc_debug.h rename to drivers/media/platform/s5p-mfc/s5p_mfc_debug.h index ecb8616a492aacfd63c8c84ce2643f64d1381ea9..bd5cd4ae993ce778b066395259f9dce3a04cce31 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_debug.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_debug.h @@ -1,5 +1,5 @@ /* - * drivers/media/video/samsung/mfc5/s5p_mfc_debug.h + * drivers/media/platform/samsung/mfc5/s5p_mfc_debug.h * * Header file for Samsung MFC (Multi Function Codec - FIMV) driver * This file contains debug macros diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c similarity index 97% rename from drivers/media/video/s5p-mfc/s5p_mfc_dec.c rename to drivers/media/platform/s5p-mfc/s5p_mfc_dec.c index c5d567f87d77acad3a335683946877757c3adce7..6ee21bb713980ac840b1c87d175f898b380d46db 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c @@ -1,5 +1,5 @@ /* - * linux/drivers/media/video/s5p-mfc/s5p_mfc_dec.c + * linux/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c * * Copyright (C) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -415,7 +415,6 @@ static int vidioc_reqbufs(struct file *file, void *priv, struct s5p_mfc_dev *dev = video_drvdata(file); struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); int ret = 0; - unsigned long flags; if (reqbufs->memory != V4L2_MEMORY_MMAP) { mfc_err("Only V4L2_MEMORY_MAP is supported\n"); @@ -497,11 +496,8 @@ static int vidioc_reqbufs(struct file *file, void *priv, s5p_mfc_clock_off(); return -ENOMEM; } - if (s5p_mfc_ctx_ready(ctx)) { - spin_lock_irqsave(&dev->condlock, flags); - set_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock_irqrestore(&dev->condlock, flags); - } + if (s5p_mfc_ctx_ready(ctx)) + set_work_bit_irqsave(ctx); s5p_mfc_try_run(dev); s5p_mfc_wait_for_done_ctx(ctx, S5P_FIMV_R2H_CMD_INIT_BUFFERS_RET, 0); @@ -576,7 +572,6 @@ static int vidioc_streamon(struct file *file, void *priv, { struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); struct s5p_mfc_dev *dev = ctx->dev; - unsigned long flags; int ret = -EINVAL; mfc_debug_enter(); @@ -589,9 +584,7 @@ static int vidioc_streamon(struct file *file, void *priv, ctx->output_state = QUEUE_FREE; s5p_mfc_alloc_instance_buffer(ctx); s5p_mfc_alloc_dec_temp_buffers(ctx); - spin_lock_irqsave(&dev->condlock, flags); - set_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock_irqrestore(&dev->condlock, flags); + set_work_bit_irqsave(ctx); s5p_mfc_clean_ctx_int_flags(ctx); s5p_mfc_try_run(dev); @@ -875,18 +868,14 @@ static int s5p_mfc_start_streaming(struct vb2_queue *q, unsigned int count) { struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv); struct s5p_mfc_dev *dev = ctx->dev; - unsigned long flags; v4l2_ctrl_handler_setup(&ctx->ctrl_handler); if (ctx->state == MFCINST_FINISHING || ctx->state == MFCINST_FINISHED) ctx->state = MFCINST_RUNNING; /* If context is ready then dev = work->data;schedule it to run */ - if (s5p_mfc_ctx_ready(ctx)) { - spin_lock_irqsave(&dev->condlock, flags); - set_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock_irqrestore(&dev->condlock, flags); - } + if (s5p_mfc_ctx_ready(ctx)) + set_work_bit_irqsave(ctx); s5p_mfc_try_run(dev); return 0; } @@ -936,14 +925,14 @@ static void s5p_mfc_buf_queue(struct vb2_buffer *vb) if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { mfc_buf = &ctx->src_bufs[vb->v4l2_buf.index]; - mfc_buf->used = 0; + mfc_buf->flags &= ~MFC_BUF_FLAG_USED; spin_lock_irqsave(&dev->irqlock, flags); list_add_tail(&mfc_buf->list, &ctx->src_queue); ctx->src_queue_cnt++; spin_unlock_irqrestore(&dev->irqlock, flags); } else if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { mfc_buf = &ctx->dst_bufs[vb->v4l2_buf.index]; - mfc_buf->used = 0; + mfc_buf->flags &= ~MFC_BUF_FLAG_USED; /* Mark destination as available for use by MFC */ spin_lock_irqsave(&dev->irqlock, flags); set_bit(vb->v4l2_buf.index, &ctx->dec_dst_flag); @@ -953,11 +942,8 @@ static void s5p_mfc_buf_queue(struct vb2_buffer *vb) } else { mfc_err("Unsupported buffer type (%d)\n", vq->type); } - if (s5p_mfc_ctx_ready(ctx)) { - spin_lock_irqsave(&dev->condlock, flags); - set_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock_irqrestore(&dev->condlock, flags); - } + if (s5p_mfc_ctx_ready(ctx)) + set_work_bit_irqsave(ctx); s5p_mfc_try_run(dev); } diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.h b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.h similarity index 93% rename from drivers/media/video/s5p-mfc/s5p_mfc_dec.h rename to drivers/media/platform/s5p-mfc/s5p_mfc_dec.h index fb8b215db0e7640d9228f9e9d59a9765e5e935c8..fdf1d99a9d15df53decc6bb427ede6dfd0903ece 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_dec.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.h @@ -1,5 +1,5 @@ /* - * linux/drivers/media/video/s5p-mfc/s5p_mfc_dec.h + * linux/drivers/media/platform/s5p-mfc/s5p_mfc_dec.h * * Copyright (C) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c similarity index 95% rename from drivers/media/video/s5p-mfc/s5p_mfc_enc.c rename to drivers/media/platform/s5p-mfc/s5p_mfc_enc.c index aa1c244cf66eee087c6f89a372c18d6bd6be6b72..179e4db60b15614a4cac63e04be9bc98667232b4 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c @@ -1,5 +1,5 @@ /* - * linux/drivers/media/video/s5p-mfc/s5p_mfc_enc.c + * linux/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -576,9 +577,9 @@ static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx) if (ctx->state == MFCINST_RUNNING && ctx->src_queue_cnt >= 1 && ctx->dst_queue_cnt >= 1) return 1; - /* context is ready to encode remain frames */ + /* context is ready to encode remaining frames */ if (ctx->state == MFCINST_FINISHING && - ctx->src_queue_cnt >= 1 && ctx->dst_queue_cnt >= 1) + ctx->dst_queue_cnt >= 1) return 1; mfc_debug(2, "ctx is not ready\n"); return 0; @@ -642,11 +643,8 @@ static int enc_post_seq_start(struct s5p_mfc_ctx *ctx) spin_unlock_irqrestore(&dev->irqlock, flags); } ctx->state = MFCINST_RUNNING; - if (s5p_mfc_ctx_ready(ctx)) { - spin_lock_irqsave(&dev->condlock, flags); - set_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock_irqrestore(&dev->condlock, flags); - } + if (s5p_mfc_ctx_ready(ctx)) + set_work_bit_irqsave(ctx); s5p_mfc_try_run(dev); return 0; } @@ -724,7 +722,7 @@ static int enc_post_frame_start(struct s5p_mfc_ctx *ctx) if ((ctx->src_queue_cnt > 0) && (ctx->state == MFCINST_RUNNING)) { mb_entry = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); - if (mb_entry->used) { + if (mb_entry->flags & MFC_BUF_FLAG_USED) { list_del(&mb_entry->list); ctx->src_queue_cnt--; list_add_tail(&mb_entry->list, &ctx->ref_queue); @@ -754,11 +752,8 @@ static int enc_post_frame_start(struct s5p_mfc_ctx *ctx) vb2_buffer_done(mb_entry->b, VB2_BUF_STATE_DONE); } spin_unlock_irqrestore(&dev->irqlock, flags); - if ((ctx->src_queue_cnt == 0) || (ctx->dst_queue_cnt == 0)) { - spin_lock(&dev->condlock); - clear_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock(&dev->condlock); - } + if ((ctx->src_queue_cnt == 0) || (ctx->dst_queue_cnt == 0)) + clear_work_bit(ctx); return 0; } @@ -921,7 +916,6 @@ static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f) struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); struct s5p_mfc_fmt *fmt; struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp; - unsigned long flags; int ret = 0; ret = vidioc_try_fmt(file, priv, f); @@ -946,9 +940,7 @@ static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f) ctx->dst_bufs_cnt = 0; ctx->capture_state = QUEUE_FREE; s5p_mfc_alloc_instance_buffer(ctx); - spin_lock_irqsave(&dev->condlock, flags); - set_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock_irqrestore(&dev->condlock, flags); + set_work_bit_irqsave(ctx); s5p_mfc_clean_ctx_int_flags(ctx); s5p_mfc_try_run(dev); if (s5p_mfc_wait_for_done_ctx(ctx, \ @@ -1119,27 +1111,43 @@ static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) mfc_err("Call on QBUF after unrecoverable error\n"); return -EIO; } - if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + if (ctx->state == MFCINST_FINISHING) { + mfc_err("Call on QBUF after EOS command\n"); + return -EIO; + } return vb2_qbuf(&ctx->vq_src, buf); - else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + } else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { return vb2_qbuf(&ctx->vq_dst, buf); + } return -EINVAL; } /* Dequeue a buffer */ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) { + const struct v4l2_event ev = { + .type = V4L2_EVENT_EOS + }; struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + int ret; if (ctx->state == MFCINST_ERROR) { mfc_err("Call on DQBUF after unrecoverable error\n"); return -EIO; } - if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) - return vb2_dqbuf(&ctx->vq_src, buf, file->f_flags & O_NONBLOCK); - else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) - return vb2_dqbuf(&ctx->vq_dst, buf, file->f_flags & O_NONBLOCK); - return -EINVAL; + if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + ret = vb2_dqbuf(&ctx->vq_src, buf, file->f_flags & O_NONBLOCK); + } else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + ret = vb2_dqbuf(&ctx->vq_dst, buf, file->f_flags & O_NONBLOCK); + if (ret == 0 && ctx->state == MFCINST_FINISHED + && list_empty(&ctx->vq_dst.done_list)) + v4l2_event_queue_fh(&ctx->fh, &ev); + } else { + ret = -EINVAL; + } + + return ret; } /* Stream on */ @@ -1471,6 +1479,57 @@ static int vidioc_g_parm(struct file *file, void *priv, return 0; } +int vidioc_encoder_cmd(struct file *file, void *priv, + struct v4l2_encoder_cmd *cmd) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_buf *buf; + unsigned long flags; + + switch (cmd->cmd) { + case V4L2_ENC_CMD_STOP: + if (cmd->flags != 0) + return -EINVAL; + + if (!ctx->vq_src.streaming) + return -EINVAL; + + spin_lock_irqsave(&dev->irqlock, flags); + if (list_empty(&ctx->src_queue)) { + mfc_debug(2, "EOS: empty src queue, entering finishing state"); + ctx->state = MFCINST_FINISHING; + spin_unlock_irqrestore(&dev->irqlock, flags); + s5p_mfc_try_run(dev); + } else { + mfc_debug(2, "EOS: marking last buffer of stream"); + buf = list_entry(ctx->src_queue.prev, + struct s5p_mfc_buf, list); + if (buf->flags & MFC_BUF_FLAG_USED) + ctx->state = MFCINST_FINISHING; + else + buf->flags |= MFC_BUF_FLAG_EOS; + spin_unlock_irqrestore(&dev->irqlock, flags); + } + break; + default: + return -EINVAL; + + } + return 0; +} + +static int vidioc_subscribe_event(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + switch (sub->type) { + case V4L2_EVENT_EOS: + return v4l2_event_subscribe(fh, sub, 2, NULL); + default: + return -EINVAL; + } +} + static const struct v4l2_ioctl_ops s5p_mfc_enc_ioctl_ops = { .vidioc_querycap = vidioc_querycap, .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, @@ -1491,6 +1550,9 @@ static const struct v4l2_ioctl_ops s5p_mfc_enc_ioctl_ops = { .vidioc_streamoff = vidioc_streamoff, .vidioc_s_parm = vidioc_s_parm, .vidioc_g_parm = vidioc_g_parm, + .vidioc_encoder_cmd = vidioc_encoder_cmd, + .vidioc_subscribe_event = vidioc_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, }; static int check_vb_with_fmt(struct s5p_mfc_fmt *fmt, struct vb2_buffer *vb) @@ -1648,15 +1710,11 @@ static int s5p_mfc_start_streaming(struct vb2_queue *q, unsigned int count) { struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv); struct s5p_mfc_dev *dev = ctx->dev; - unsigned long flags; v4l2_ctrl_handler_setup(&ctx->ctrl_handler); /* If context is ready then dev = work->data;schedule it to run */ - if (s5p_mfc_ctx_ready(ctx)) { - spin_lock_irqsave(&dev->condlock, flags); - set_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock_irqrestore(&dev->condlock, flags); - } + if (s5p_mfc_ctx_ready(ctx)) + set_work_bit_irqsave(ctx); s5p_mfc_try_run(dev); return 0; } @@ -1706,7 +1764,7 @@ static void s5p_mfc_buf_queue(struct vb2_buffer *vb) } if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { mfc_buf = &ctx->dst_bufs[vb->v4l2_buf.index]; - mfc_buf->used = 0; + mfc_buf->flags &= ~MFC_BUF_FLAG_USED; /* Mark destination as available for use by MFC */ spin_lock_irqsave(&dev->irqlock, flags); list_add_tail(&mfc_buf->list, &ctx->dst_queue); @@ -1714,26 +1772,16 @@ static void s5p_mfc_buf_queue(struct vb2_buffer *vb) spin_unlock_irqrestore(&dev->irqlock, flags); } else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { mfc_buf = &ctx->src_bufs[vb->v4l2_buf.index]; - mfc_buf->used = 0; + mfc_buf->flags &= ~MFC_BUF_FLAG_USED; spin_lock_irqsave(&dev->irqlock, flags); - if (vb->v4l2_planes[0].bytesused == 0) { - mfc_debug(1, "change state to FINISHING\n"); - ctx->state = MFCINST_FINISHING; - vb2_buffer_done(vb, VB2_BUF_STATE_DONE); - cleanup_ref_queue(ctx); - } else { - list_add_tail(&mfc_buf->list, &ctx->src_queue); - ctx->src_queue_cnt++; - } + list_add_tail(&mfc_buf->list, &ctx->src_queue); + ctx->src_queue_cnt++; spin_unlock_irqrestore(&dev->irqlock, flags); } else { mfc_err("unsupported buffer type (%d)\n", vq->type); } - if (s5p_mfc_ctx_ready(ctx)) { - spin_lock_irqsave(&dev->condlock, flags); - set_bit(ctx->num, &dev->ctx_work_bits); - spin_unlock_irqrestore(&dev->condlock, flags); - } + if (s5p_mfc_ctx_ready(ctx)) + set_work_bit_irqsave(ctx); s5p_mfc_try_run(dev); } diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.h b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.h similarity index 93% rename from drivers/media/video/s5p-mfc/s5p_mfc_enc.h rename to drivers/media/platform/s5p-mfc/s5p_mfc_enc.h index 405bdd3ee083200fbea8a2462a66031d13952d79..ca9fd66bd310a287ff015ee3e041e3b3ccae5518 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.h @@ -1,5 +1,5 @@ /* - * linux/drivers/media/video/s5p-mfc/s5p_mfc_enc.h + * linux/drivers/media/platform/s5p-mfc/s5p_mfc_enc.h * * Copyright (C) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_intr.c b/drivers/media/platform/s5p-mfc/s5p_mfc_intr.c similarity index 97% rename from drivers/media/video/s5p-mfc/s5p_mfc_intr.c rename to drivers/media/platform/s5p-mfc/s5p_mfc_intr.c index 8f2f8bf4da7f81f00be7eeb65370a7caad373c93..37860e299021dddfd16f28f967e7412fb88d6ba5 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_intr.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_intr.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/samsung/mfc5/s5p_mfc_intr.c + * drivers/media/platform/samsung/mfc5/s5p_mfc_intr.c * * C file for Samsung MFC (Multi Function Codec - FIMV) driver * This file contains functions used to wait for command completion. diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_intr.h b/drivers/media/platform/s5p-mfc/s5p_mfc_intr.h similarity index 93% rename from drivers/media/video/s5p-mfc/s5p_mfc_intr.h rename to drivers/media/platform/s5p-mfc/s5p_mfc_intr.h index 122d7732f74522e76be7f2d8506185fc5cd1d248..18341a88514ead9aa3e707340929272acc692442 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_intr.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_intr.h @@ -1,5 +1,5 @@ /* - * drivers/media/video/samsung/mfc5/s5p_mfc_intr.h + * drivers/media/platform/samsung/mfc5/s5p_mfc_intr.h * * Header file for Samsung MFC (Multi Function Codec - FIMV) driver * It contains waiting functions declarations. diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_opr.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.c similarity index 97% rename from drivers/media/video/s5p-mfc/s5p_mfc_opr.c rename to drivers/media/platform/s5p-mfc/s5p_mfc_opr.c index e6217cbfa4a3e82612cee5dbae7c0afab0f13bda..767a51271dc248f8f7663545ae4e101acee9ea39 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_opr.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.c @@ -1,5 +1,5 @@ /* - * drivers/media/video/samsung/mfc5/s5p_mfc_opr.c + * drivers/media/platform/samsung/mfc5/s5p_mfc_opr.c * * Samsung MFC (Multi Function Codec - FIMV) driver * This file contains hw related functions. @@ -1075,14 +1075,21 @@ int s5p_mfc_init_encode(struct s5p_mfc_ctx *ctx) int s5p_mfc_encode_one_frame(struct s5p_mfc_ctx *ctx) { struct s5p_mfc_dev *dev = ctx->dev; + int cmd; /* memory structure cur. frame */ if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12M) mfc_write(dev, 0, S5P_FIMV_ENC_MAP_FOR_CUR); else if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12MT) mfc_write(dev, 3, S5P_FIMV_ENC_MAP_FOR_CUR); s5p_mfc_set_shared_buffer(ctx); - mfc_write(dev, (S5P_FIMV_CH_FRAME_START << 16 & 0x70000) | - (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID); + + if (ctx->state == MFCINST_FINISHING) + cmd = S5P_FIMV_CH_LAST_FRAME; + else + cmd = S5P_FIMV_CH_FRAME_START; + mfc_write(dev, ((cmd & S5P_FIMV_CH_MASK) << S5P_FIMV_CH_SHIFT) + | (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID); + return 0; } @@ -1133,7 +1140,7 @@ static int s5p_mfc_run_dec_frame(struct s5p_mfc_ctx *ctx, int last_frame) } /* Get the next source buffer */ temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); - temp_vb->used = 1; + temp_vb->flags |= MFC_BUF_FLAG_USED; s5p_mfc_set_dec_stream_buffer(ctx, vb2_dma_contig_plane_dma_addr(temp_vb->b, 0), ctx->consumed_stream, temp_vb->b->v4l2_planes[0].bytesused); @@ -1160,7 +1167,7 @@ static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx) unsigned int dst_size; spin_lock_irqsave(&dev->irqlock, flags); - if (list_empty(&ctx->src_queue)) { + if (list_empty(&ctx->src_queue) && ctx->state != MFCINST_FINISHING) { mfc_debug(2, "no src buffers\n"); spin_unlock_irqrestore(&dev->irqlock, flags); return -EAGAIN; @@ -1170,19 +1177,40 @@ static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx) spin_unlock_irqrestore(&dev->irqlock, flags); return -EAGAIN; } - src_mb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); - src_mb->used = 1; - src_y_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, 0); - src_c_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, 1); - s5p_mfc_set_enc_frame_buffer(ctx, src_y_addr, src_c_addr); + if (list_empty(&ctx->src_queue)) { + /* send null frame */ + s5p_mfc_set_enc_frame_buffer(ctx, dev->bank2, dev->bank2); + src_mb = NULL; + } else { + src_mb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, + list); + src_mb->flags |= MFC_BUF_FLAG_USED; + if (src_mb->b->v4l2_planes[0].bytesused == 0) { + /* send null frame */ + s5p_mfc_set_enc_frame_buffer(ctx, dev->bank2, + dev->bank2); + ctx->state = MFCINST_FINISHING; + } else { + src_y_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, + 0); + src_c_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, + 1); + s5p_mfc_set_enc_frame_buffer(ctx, src_y_addr, + src_c_addr); + if (src_mb->flags & MFC_BUF_FLAG_EOS) + ctx->state = MFCINST_FINISHING; + } + } dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list); - dst_mb->used = 1; + dst_mb->flags |= MFC_BUF_FLAG_USED; dst_addr = vb2_dma_contig_plane_dma_addr(dst_mb->b, 0); dst_size = vb2_plane_size(dst_mb->b, 0); s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size); spin_unlock_irqrestore(&dev->irqlock, flags); dev->curr_ctx = ctx->num; s5p_mfc_clean_ctx_int_flags(ctx); + mfc_debug(2, "encoding buffer with index=%d state=%d", + src_mb ? src_mb->b->v4l2_buf.index : -1, ctx->state); s5p_mfc_encode_one_frame(ctx); return 0; } diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_opr.h b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h similarity index 98% rename from drivers/media/video/s5p-mfc/s5p_mfc_opr.h rename to drivers/media/platform/s5p-mfc/s5p_mfc_opr.h index 5932d1c782c5dba36e18b55a6a3dcf6cda9f77da..2ad3def052f8836d844e27ef6bad80ec0d77d8dc 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_opr.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h @@ -1,5 +1,5 @@ /* - * drivers/media/video/samsung/mfc5/s5p_mfc_opr.h + * drivers/media/platform/samsung/mfc5/s5p_mfc_opr.h * * Header file for Samsung MFC (Multi Function Codec - FIMV) driver * Contains declarations of hw related functions. diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c similarity index 98% rename from drivers/media/video/s5p-mfc/s5p_mfc_pm.c rename to drivers/media/platform/s5p-mfc/s5p_mfc_pm.c index 738a607be43c9b05b7a7040195fb4bea625a5cab..0503d14ac94e141931ca250f744f82db4476822c 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_pm.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c @@ -1,5 +1,5 @@ /* - * linux/drivers/media/video/s5p-mfc/s5p_mfc_pm.c + * linux/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_pm.h b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.h similarity index 92% rename from drivers/media/video/s5p-mfc/s5p_mfc_pm.h rename to drivers/media/platform/s5p-mfc/s5p_mfc_pm.h index 5107914f27e46e9f29b30c8cb0a758013d5ea5c2..875c5346bc85416684f26e0659b47d9261b9ee90 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_pm.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.h @@ -1,5 +1,5 @@ /* - * linux/drivers/media/video/s5p-mfc/s5p_mfc_pm.h + * linux/drivers/media/platform/s5p-mfc/s5p_mfc_pm.h * * Copyright (C) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_shm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_shm.c similarity index 96% rename from drivers/media/video/s5p-mfc/s5p_mfc_shm.c rename to drivers/media/platform/s5p-mfc/s5p_mfc_shm.c index 91fdbac8c37a2bf7647226fe7a84a500289803f4..b5933d233a4bdbb029dbdfdc9eb8b2fd52051420 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_shm.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_shm.c @@ -1,5 +1,5 @@ /* - * linux/drivers/media/video/s5p-mfc/s5p_mfc_shm.c + * linux/drivers/media/platform/s5p-mfc/s5p_mfc_shm.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_shm.h b/drivers/media/platform/s5p-mfc/s5p_mfc_shm.h similarity index 98% rename from drivers/media/video/s5p-mfc/s5p_mfc_shm.h rename to drivers/media/platform/s5p-mfc/s5p_mfc_shm.h index cf962a4662766db5b1888f01c7e910fe245447c6..416ebd7ba35ad3d333d15d2d4f004b31937be366 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_shm.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_shm.h @@ -1,5 +1,5 @@ /* - * linux/drivers/media/video/s5p-mfc/s5p_mfc_shm.h + * linux/drivers/media/platform/s5p-mfc/s5p_mfc_shm.h * * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/drivers/media/video/s5p-tv/Kconfig b/drivers/media/platform/s5p-tv/Kconfig similarity index 98% rename from drivers/media/video/s5p-tv/Kconfig rename to drivers/media/platform/s5p-tv/Kconfig index f248b285672090990bdea9f9bf81d6ff95adcae8..ea11a513033f6e436e5af6469dbb6cc6dfa5ba7b 100644 --- a/drivers/media/video/s5p-tv/Kconfig +++ b/drivers/media/platform/s5p-tv/Kconfig @@ -1,4 +1,4 @@ -# drivers/media/video/s5p-tv/Kconfig +# drivers/media/platform/s5p-tv/Kconfig # # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. # http://www.samsung.com/ diff --git a/drivers/media/video/s5p-tv/Makefile b/drivers/media/platform/s5p-tv/Makefile similarity index 92% rename from drivers/media/video/s5p-tv/Makefile rename to drivers/media/platform/s5p-tv/Makefile index f49e756a2fde117e1096c29a6db7a5ef25f6be95..7cd47902e2691d606680860080185d13cbecdb10 100644 --- a/drivers/media/video/s5p-tv/Makefile +++ b/drivers/media/platform/s5p-tv/Makefile @@ -1,4 +1,4 @@ -# drivers/media/video/samsung/tvout/Makefile +# drivers/media/platform/samsung/tvout/Makefile # # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. # http://www.samsung.com/ diff --git a/drivers/media/video/s5p-tv/hdmi_drv.c b/drivers/media/platform/s5p-tv/hdmi_drv.c similarity index 99% rename from drivers/media/video/s5p-tv/hdmi_drv.c rename to drivers/media/platform/s5p-tv/hdmi_drv.c index 20cb6eef2979968bc669cd9dddee74441b0a15d6..8a9cf43018f635f48724953756108ec3ce800cb5 100644 --- a/drivers/media/video/s5p-tv/hdmi_drv.c +++ b/drivers/media/platform/s5p-tv/hdmi_drv.c @@ -11,6 +11,8 @@ * or (at your option) any later version */ +#define pr_fmt(fmt) "s5p-tv (hdmi_drv): " fmt + #ifdef CONFIG_VIDEO_SAMSUNG_S5P_HDMI_DEBUG #define DEBUG #endif @@ -161,12 +163,12 @@ static irqreturn_t hdmi_irq_handler(int irq, void *dev_data) intc_flag = hdmi_read(hdev, HDMI_INTC_FLAG); /* clearing flags for HPD plug/unplug */ if (intc_flag & HDMI_INTC_FLAG_HPD_UNPLUG) { - printk(KERN_INFO "unplugged\n"); + pr_info("unplugged\n"); hdmi_write_mask(hdev, HDMI_INTC_FLAG, ~0, HDMI_INTC_FLAG_HPD_UNPLUG); } if (intc_flag & HDMI_INTC_FLAG_HPD_PLUG) { - printk(KERN_INFO "plugged\n"); + pr_info("plugged\n"); hdmi_write_mask(hdev, HDMI_INTC_FLAG, ~0, HDMI_INTC_FLAG_HPD_PLUG); } diff --git a/drivers/media/video/s5p-tv/hdmiphy_drv.c b/drivers/media/platform/s5p-tv/hdmiphy_drv.c similarity index 100% rename from drivers/media/video/s5p-tv/hdmiphy_drv.c rename to drivers/media/platform/s5p-tv/hdmiphy_drv.c diff --git a/drivers/media/video/s5p-tv/mixer.h b/drivers/media/platform/s5p-tv/mixer.h similarity index 100% rename from drivers/media/video/s5p-tv/mixer.h rename to drivers/media/platform/s5p-tv/mixer.h diff --git a/drivers/media/video/s5p-tv/mixer_drv.c b/drivers/media/platform/s5p-tv/mixer_drv.c similarity index 98% rename from drivers/media/video/s5p-tv/mixer_drv.c rename to drivers/media/platform/s5p-tv/mixer_drv.c index edca06592883af71a1fee9b191f7acd3d723214c..ca0f2971744851e6ee9770fcc3227ad8c699be72 100644 --- a/drivers/media/video/s5p-tv/mixer_drv.c +++ b/drivers/media/platform/s5p-tv/mixer_drv.c @@ -384,7 +384,7 @@ static int __devinit mxr_probe(struct platform_device *pdev) mdev = kzalloc(sizeof *mdev, GFP_KERNEL); if (!mdev) { - mxr_err(mdev, "not enough memory.\n"); + dev_err(dev, "not enough memory.\n"); ret = -ENOMEM; goto fail; } @@ -461,10 +461,10 @@ static struct platform_driver mxr_driver __refdata = { static int __init mxr_init(void) { int i, ret; - static const char banner[] __initconst = KERN_INFO + static const char banner[] __initconst = "Samsung TV Mixer driver, " "(c) 2010-2011 Samsung Electronics Co., Ltd.\n"; - printk(banner); + pr_info("%s\n", banner); /* Loading auxiliary modules */ for (i = 0; i < ARRAY_SIZE(mxr_output_conf); ++i) @@ -472,7 +472,7 @@ static int __init mxr_init(void) ret = platform_driver_register(&mxr_driver); if (ret != 0) { - printk(KERN_ERR "registration of MIXER driver failed\n"); + pr_err("s5p-tv: registration of MIXER driver failed\n"); return -ENXIO; } diff --git a/drivers/media/video/s5p-tv/mixer_grp_layer.c b/drivers/media/platform/s5p-tv/mixer_grp_layer.c similarity index 100% rename from drivers/media/video/s5p-tv/mixer_grp_layer.c rename to drivers/media/platform/s5p-tv/mixer_grp_layer.c diff --git a/drivers/media/video/s5p-tv/mixer_reg.c b/drivers/media/platform/s5p-tv/mixer_reg.c similarity index 100% rename from drivers/media/video/s5p-tv/mixer_reg.c rename to drivers/media/platform/s5p-tv/mixer_reg.c diff --git a/drivers/media/video/s5p-tv/mixer_video.c b/drivers/media/platform/s5p-tv/mixer_video.c similarity index 97% rename from drivers/media/video/s5p-tv/mixer_video.c rename to drivers/media/platform/s5p-tv/mixer_video.c index 6c74b05d1f95382e691feb48f863e96b175d1a4b..0c1cd895ff660453dfff91f5ac40feea5d67535d 100644 --- a/drivers/media/video/s5p-tv/mixer_video.c +++ b/drivers/media/platform/s5p-tv/mixer_video.c @@ -11,6 +11,8 @@ * or (at your option) any later version */ +#define pr_fmt(fmt) "s5p-tv (mixer): " fmt + #include "mixer.h" #include @@ -162,9 +164,8 @@ static int mxr_querycap(struct file *file, void *priv, strlcpy(cap->driver, MXR_DRIVER_NAME, sizeof cap->driver); strlcpy(cap->card, layer->vfd.name, sizeof cap->card); sprintf(cap->bus_info, "%d", layer->idx); - cap->version = KERNEL_VERSION(0, 1, 0); - cap->capabilities = V4L2_CAP_STREAMING | - V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_VIDEO_OUTPUT_MPLANE; + cap->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_OUTPUT_MPLANE; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; } @@ -716,7 +717,7 @@ static int mxr_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) static const struct v4l2_ioctl_ops mxr_ioctl_ops = { .vidioc_querycap = mxr_querycap, /* format handling */ - .vidioc_enum_fmt_vid_out = mxr_enum_fmt, + .vidioc_enum_fmt_vid_out_mplane = mxr_enum_fmt, .vidioc_s_fmt_vid_out_mplane = mxr_s_fmt, .vidioc_g_fmt_vid_out_mplane = mxr_g_fmt, /* buffer control */ @@ -750,18 +751,20 @@ static int mxr_video_open(struct file *file) int ret = 0; mxr_dbg(mdev, "%s:%d\n", __func__, __LINE__); + if (mutex_lock_interruptible(&layer->mutex)) + return -ERESTARTSYS; /* assure device probe is finished */ wait_for_device_probe(); /* creating context for file descriptor */ ret = v4l2_fh_open(file); if (ret) { mxr_err(mdev, "v4l2_fh_open failed\n"); - return ret; + goto unlock; } /* leaving if layer is already initialized */ if (!v4l2_fh_is_singular_file(file)) - return 0; + goto unlock; /* FIXME: should power be enabled on open? */ ret = mxr_power_get(mdev); @@ -779,6 +782,7 @@ static int mxr_video_open(struct file *file) layer->fmt = layer->fmt_array[0]; /* setup default geometry */ mxr_layer_default_geo(layer); + mutex_unlock(&layer->mutex); return 0; @@ -788,6 +792,9 @@ static int mxr_video_open(struct file *file) fail_fh_open: v4l2_fh_release(file); +unlock: + mutex_unlock(&layer->mutex); + return ret; } @@ -795,19 +802,28 @@ static unsigned int mxr_video_poll(struct file *file, struct poll_table_struct *wait) { struct mxr_layer *layer = video_drvdata(file); + unsigned int res; mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); - return vb2_poll(&layer->vb_queue, file, wait); + mutex_lock(&layer->mutex); + res = vb2_poll(&layer->vb_queue, file, wait); + mutex_unlock(&layer->mutex); + return res; } static int mxr_video_mmap(struct file *file, struct vm_area_struct *vma) { struct mxr_layer *layer = video_drvdata(file); + int ret; mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); - return vb2_mmap(&layer->vb_queue, vma); + if (mutex_lock_interruptible(&layer->mutex)) + return -ERESTARTSYS; + ret = vb2_mmap(&layer->vb_queue, vma); + mutex_unlock(&layer->mutex); + return ret; } static int mxr_video_release(struct file *file) @@ -815,11 +831,13 @@ static int mxr_video_release(struct file *file) struct mxr_layer *layer = video_drvdata(file); mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + mutex_lock(&layer->mutex); if (v4l2_fh_is_singular_file(file)) { vb2_queue_release(&layer->vb_queue); mxr_power_put(layer->mdev); } v4l2_fh_release(file); + mutex_unlock(&layer->mutex); return 0; } @@ -1036,7 +1054,7 @@ void mxr_base_layer_release(struct mxr_layer *layer) static void mxr_vfd_release(struct video_device *vdev) { - printk(KERN_INFO "video device release\n"); + pr_info("video device release\n"); } struct mxr_layer *mxr_base_layer_create(struct mxr_device *mdev, @@ -1062,6 +1080,7 @@ struct mxr_layer *mxr_base_layer_create(struct mxr_device *mdev, .minor = -1, .release = mxr_vfd_release, .fops = &mxr_fops, + .vfl_dir = VFL_DIR_TX, .ioctl_ops = &mxr_ioctl_ops, }; strlcpy(layer->vfd.name, name, sizeof(layer->vfd.name)); @@ -1069,10 +1088,6 @@ struct mxr_layer *mxr_base_layer_create(struct mxr_device *mdev, set_bit(V4L2_FL_USE_FH_PRIO, &layer->vfd.flags); video_set_drvdata(&layer->vfd, layer); - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &layer->vfd.flags); layer->vfd.lock = &layer->mutex; layer->vfd.v4l2_dev = &mdev->v4l2_dev; diff --git a/drivers/media/video/s5p-tv/mixer_vp_layer.c b/drivers/media/platform/s5p-tv/mixer_vp_layer.c similarity index 100% rename from drivers/media/video/s5p-tv/mixer_vp_layer.c rename to drivers/media/platform/s5p-tv/mixer_vp_layer.c diff --git a/drivers/media/video/s5p-tv/regs-hdmi.h b/drivers/media/platform/s5p-tv/regs-hdmi.h similarity index 100% rename from drivers/media/video/s5p-tv/regs-hdmi.h rename to drivers/media/platform/s5p-tv/regs-hdmi.h diff --git a/drivers/media/video/s5p-tv/regs-mixer.h b/drivers/media/platform/s5p-tv/regs-mixer.h similarity index 100% rename from drivers/media/video/s5p-tv/regs-mixer.h rename to drivers/media/platform/s5p-tv/regs-mixer.h diff --git a/drivers/media/video/s5p-tv/regs-sdo.h b/drivers/media/platform/s5p-tv/regs-sdo.h similarity index 97% rename from drivers/media/video/s5p-tv/regs-sdo.h rename to drivers/media/platform/s5p-tv/regs-sdo.h index 7f7c2b8ac14099f9ee3dd1b6d6eda79cddd0c2f8..6f22fbfe2f6c471bb5467dd31e86a42ce143d3e2 100644 --- a/drivers/media/video/s5p-tv/regs-sdo.h +++ b/drivers/media/platform/s5p-tv/regs-sdo.h @@ -1,4 +1,4 @@ -/* drivers/media/video/s5p-tv/regs-sdo.h +/* drivers/media/platform/s5p-tv/regs-sdo.h * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/drivers/media/video/s5p-tv/regs-vp.h b/drivers/media/platform/s5p-tv/regs-vp.h similarity index 100% rename from drivers/media/video/s5p-tv/regs-vp.h rename to drivers/media/platform/s5p-tv/regs-vp.h diff --git a/drivers/media/video/s5p-tv/sdo_drv.c b/drivers/media/platform/s5p-tv/sdo_drv.c similarity index 98% rename from drivers/media/video/s5p-tv/sdo_drv.c rename to drivers/media/platform/s5p-tv/sdo_drv.c index f6bca2c20e8923d1cc6a3b5d1e44d452e8acdf2f..ad68bbed014e2c3a31119c0f4ea46c0317903b5f 100644 --- a/drivers/media/video/s5p-tv/sdo_drv.c +++ b/drivers/media/platform/s5p-tv/sdo_drv.c @@ -374,15 +374,15 @@ static int __devinit sdo_probe(struct platform_device *pdev) dev_info(dev, "fout_vpll.rate = %lu\n", clk_get_rate(sclk_vpll)); /* acquire regulator */ - sdev->vdac = regulator_get(dev, "vdd33a_dac"); + sdev->vdac = devm_regulator_get(dev, "vdd33a_dac"); if (IS_ERR_OR_NULL(sdev->vdac)) { dev_err(dev, "failed to get regulator 'vdac'\n"); goto fail_fout_vpll; } - sdev->vdet = regulator_get(dev, "vdet"); + sdev->vdet = devm_regulator_get(dev, "vdet"); if (IS_ERR_OR_NULL(sdev->vdet)) { dev_err(dev, "failed to get regulator 'vdet'\n"); - goto fail_vdac; + goto fail_fout_vpll; } /* enable gate for dac clock, because mixer uses it */ @@ -406,8 +406,6 @@ static int __devinit sdo_probe(struct platform_device *pdev) dev_info(dev, "probe succeeded\n"); return 0; -fail_vdac: - regulator_put(sdev->vdac); fail_fout_vpll: clk_put(sdev->fout_vpll); fail_dacphy: @@ -428,8 +426,6 @@ static int __devexit sdo_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); clk_disable(sdev->dac); - regulator_put(sdev->vdet); - regulator_put(sdev->vdac); clk_put(sdev->fout_vpll); clk_put(sdev->dacphy); clk_put(sdev->dac); diff --git a/drivers/media/video/s5p-tv/sii9234_drv.c b/drivers/media/platform/s5p-tv/sii9234_drv.c similarity index 97% rename from drivers/media/video/s5p-tv/sii9234_drv.c rename to drivers/media/platform/s5p-tv/sii9234_drv.c index 6d348f90237af244c6d4436d7f094ba2d973dab3..716d4846f8bdba7cadf04e992fc36ece0ffac226 100644 --- a/drivers/media/video/s5p-tv/sii9234_drv.c +++ b/drivers/media/platform/s5p-tv/sii9234_drv.c @@ -323,7 +323,7 @@ static int __devinit sii9234_probe(struct i2c_client *client, struct sii9234_context *ctx; int ret; - ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(&client->dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) { dev_err(dev, "out of memory\n"); ret = -ENOMEM; @@ -331,18 +331,17 @@ static int __devinit sii9234_probe(struct i2c_client *client, } ctx->client = client; - ctx->power = regulator_get(dev, "hdmi-en"); + ctx->power = devm_regulator_get(dev, "hdmi-en"); if (IS_ERR(ctx->power)) { dev_err(dev, "failed to acquire regulator hdmi-en\n"); - ret = PTR_ERR(ctx->power); - goto fail_ctx; + return PTR_ERR(ctx->power); } ctx->gpio_n_reset = pdata->gpio_n_reset; ret = gpio_request(ctx->gpio_n_reset, "MHL_RST"); if (ret) { dev_err(dev, "failed to acquire MHL_RST gpio\n"); - goto fail_power; + return ret; } v4l2_i2c_subdev_init(&ctx->sd, client, &sii9234_ops); @@ -373,12 +372,6 @@ static int __devinit sii9234_probe(struct i2c_client *client, pm_runtime_disable(dev); gpio_free(ctx->gpio_n_reset); -fail_power: - regulator_put(ctx->power); - -fail_ctx: - kfree(ctx); - fail: dev_err(dev, "probe failed\n"); @@ -393,8 +386,6 @@ static int __devexit sii9234_remove(struct i2c_client *client) pm_runtime_disable(dev); gpio_free(ctx->gpio_n_reset); - regulator_put(ctx->power); - kfree(ctx); dev_info(dev, "remove successful\n"); diff --git a/drivers/media/video/sh_vou.c b/drivers/media/platform/sh_vou.c similarity index 97% rename from drivers/media/video/sh_vou.c rename to drivers/media/platform/sh_vou.c index 8fd1874382c65f7479fddb819a6c171aa6305579..85fd312f0a829fee9f45b1e682694cc3fc475cf3 100644 --- a/drivers/media/video/sh_vou.c +++ b/drivers/media/platform/sh_vou.c @@ -933,7 +933,7 @@ static int sh_vou_g_crop(struct file *file, void *fh, struct v4l2_crop *a) } /* Assume a dull encoder, do all the work ourselves. */ -static int sh_vou_s_crop(struct file *file, void *fh, struct v4l2_crop *a) +static int sh_vou_s_crop(struct file *file, void *fh, const struct v4l2_crop *a) { struct video_device *vdev = video_devdata(file); struct sh_vou_device *vou_dev = video_get_drvdata(vdev); @@ -1171,6 +1171,8 @@ static int sh_vou_open(struct file *file) file->private_data = vou_file; + if (mutex_lock_interruptible(&vou_dev->fop_lock)) + return -ERESTARTSYS; if (atomic_inc_return(&vou_dev->use_count) == 1) { int ret; /* First open */ @@ -1181,6 +1183,7 @@ static int sh_vou_open(struct file *file) atomic_dec(&vou_dev->use_count); pm_runtime_put(vdev->v4l2_dev->dev); vou_dev->status = SH_VOU_IDLE; + mutex_unlock(&vou_dev->fop_lock); return ret; } } @@ -1191,6 +1194,7 @@ static int sh_vou_open(struct file *file) V4L2_FIELD_NONE, sizeof(struct videobuf_buffer), vdev, &vou_dev->fop_lock); + mutex_unlock(&vou_dev->fop_lock); return 0; } @@ -1204,10 +1208,12 @@ static int sh_vou_release(struct file *file) dev_dbg(vou_file->vbq.dev, "%s()\n", __func__); if (!atomic_dec_return(&vou_dev->use_count)) { + mutex_lock(&vou_dev->fop_lock); /* Last close */ vou_dev->status = SH_VOU_IDLE; sh_vou_reg_a_set(vou_dev, VOUER, 0, 0x101); pm_runtime_put(vdev->v4l2_dev->dev); + mutex_unlock(&vou_dev->fop_lock); } file->private_data = NULL; @@ -1218,20 +1224,33 @@ static int sh_vou_release(struct file *file) static int sh_vou_mmap(struct file *file, struct vm_area_struct *vma) { + struct video_device *vdev = video_devdata(file); + struct sh_vou_device *vou_dev = video_get_drvdata(vdev); struct sh_vou_file *vou_file = file->private_data; + int ret; dev_dbg(vou_file->vbq.dev, "%s()\n", __func__); - return videobuf_mmap_mapper(&vou_file->vbq, vma); + if (mutex_lock_interruptible(&vou_dev->fop_lock)) + return -ERESTARTSYS; + ret = videobuf_mmap_mapper(&vou_file->vbq, vma); + mutex_unlock(&vou_dev->fop_lock); + return ret; } static unsigned int sh_vou_poll(struct file *file, poll_table *wait) { + struct video_device *vdev = video_devdata(file); + struct sh_vou_device *vou_dev = video_get_drvdata(vdev); struct sh_vou_file *vou_file = file->private_data; + unsigned int res; dev_dbg(vou_file->vbq.dev, "%s()\n", __func__); - return videobuf_poll_stream(file, &vou_file->vbq, wait); + mutex_lock(&vou_dev->fop_lock); + res = videobuf_poll_stream(file, &vou_file->vbq, wait); + mutex_unlock(&vou_dev->fop_lock); + return res; } static int sh_vou_g_chip_ident(struct file *file, void *fh, @@ -1303,6 +1322,7 @@ static const struct video_device sh_vou_video_template = { .ioctl_ops = &sh_vou_ioctl_ops, .tvnorms = V4L2_STD_525_60, /* PAL only supported in 8-bit non-bt656 mode */ .current_norm = V4L2_STD_NTSC_M, + .vfl_dir = VFL_DIR_TX, }; static int __devinit sh_vou_probe(struct platform_device *pdev) @@ -1390,10 +1410,6 @@ static int __devinit sh_vou_probe(struct platform_device *pdev) vdev->v4l2_dev = &vou_dev->v4l2_dev; vdev->release = video_device_release; vdev->lock = &vou_dev->fop_lock; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags); vou_dev->vdev = vdev; video_set_drvdata(vdev, vou_dev); diff --git a/drivers/media/platform/soc_camera/Kconfig b/drivers/media/platform/soc_camera/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..9afe1e7bde748a6b238ed45d99da4d6bdb1b7ecb --- /dev/null +++ b/drivers/media/platform/soc_camera/Kconfig @@ -0,0 +1,87 @@ +config SOC_CAMERA + tristate "SoC camera support" + depends on VIDEO_V4L2 && HAS_DMA && I2C + select VIDEOBUF_GEN + select VIDEOBUF2_CORE + help + SoC Camera is a common API to several cameras, not connecting + over a bus like PCI or USB. For example some i2c camera connected + directly to the data bus of an SoC. + +config SOC_CAMERA_PLATFORM + tristate "platform camera support" + depends on SOC_CAMERA + help + This is a generic SoC camera platform driver, useful for testing + +config MX1_VIDEO + bool + +config VIDEO_MX1 + tristate "i.MX1/i.MXL CMOS Sensor Interface driver" + depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA + select FIQ + select VIDEOBUF_DMA_CONTIG + select MX1_VIDEO + ---help--- + This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface + +config MX3_VIDEO + bool + +config VIDEO_MX3 + tristate "i.MX3x Camera Sensor Interface driver" + depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA + select VIDEOBUF2_DMA_CONTIG + select MX3_VIDEO + ---help--- + This is a v4l2 driver for the i.MX3x Camera Sensor Interface + +config VIDEO_PXA27x + tristate "PXA27x Quick Capture Interface driver" + depends on VIDEO_DEV && PXA27x && SOC_CAMERA + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the PXA27x Quick Capture Interface + +config VIDEO_SH_MOBILE_CSI2 + tristate "SuperH Mobile MIPI CSI-2 Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK + ---help--- + This is a v4l2 driver for the SuperH MIPI CSI-2 Interface + +config VIDEO_SH_MOBILE_CEU + tristate "SuperH Mobile CEU Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK + select VIDEOBUF2_DMA_CONTIG + ---help--- + This is a v4l2 driver for the SuperH Mobile CEU Interface + +config VIDEO_OMAP1 + tristate "OMAP1 Camera Interface driver" + depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA + select VIDEOBUF_DMA_CONTIG + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the TI OMAP1 camera interface + +config VIDEO_MX2_HOSTSUPPORT + bool + +config VIDEO_MX2 + tristate "i.MX27/i.MX25 Camera Sensor Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || (ARCH_MX25 && BROKEN)) + select VIDEOBUF2_DMA_CONTIG + select VIDEO_MX2_HOSTSUPPORT + ---help--- + This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor + Interface + +config VIDEO_ATMEL_ISI + tristate "ATMEL Image Sensor Interface (ISI) support" + depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91 + select VIDEOBUF2_DMA_CONTIG + ---help--- + This module makes the ATMEL Image Sensor Interface available + as a v4l2 device. + diff --git a/drivers/media/platform/soc_camera/Makefile b/drivers/media/platform/soc_camera/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..136b7f8ff10d4f17f5318d461575d61d36eba790 --- /dev/null +++ b/drivers/media/platform/soc_camera/Makefile @@ -0,0 +1,14 @@ +obj-$(CONFIG_SOC_CAMERA) += soc_camera.o soc_mediabus.o +obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o + +# soc-camera host drivers have to be linked after camera drivers +obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o +obj-$(CONFIG_VIDEO_MX1) += mx1_camera.o +obj-$(CONFIG_VIDEO_MX2) += mx2_camera.o +obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o +obj-$(CONFIG_VIDEO_OMAP1) += omap1_camera.o +obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o +obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o +obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2) += sh_mobile_csi2.o + +ccflags-y += -I$(srctree)/drivers/media/i2c/soc_camera diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c similarity index 100% rename from drivers/media/video/atmel-isi.c rename to drivers/media/platform/soc_camera/atmel-isi.c diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/platform/soc_camera/mx1_camera.c similarity index 100% rename from drivers/media/video/mx1_camera.c rename to drivers/media/platform/soc_camera/mx1_camera.c diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c similarity index 93% rename from drivers/media/video/mx2_camera.c rename to drivers/media/platform/soc_camera/mx2_camera.c index ac175406e582a0c12c2d62fe8de713f89a5353cc..619df35de3da18d0691c2ea1438699b952cdc72e 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -274,12 +274,9 @@ struct mx2_camera_dev { struct soc_camera_device *icd; struct clk *clk_csi, *clk_emma_ahb, *clk_emma_ipg; - unsigned int irq_csi, irq_emma; void __iomem *base_csi, *base_emma; - unsigned long base_dma; struct mx2_camera_platform_data *pdata; - struct resource *res_csi, *res_emma; unsigned long platform_flags; struct list_head capture; @@ -335,6 +332,34 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = { .csicr1 = 0, } }, + { + .in_fmt = V4L2_MBUS_FMT_UYVY8_2X8, + .out_fmt = V4L2_PIX_FMT_YUYV, + .cfg = { + .channel = 1, + .in_fmt = PRP_CNTL_DATA_IN_YUV422, + .out_fmt = PRP_CNTL_CH1_OUT_YUV422, + .src_pixel = 0x22000888, /* YUV422 (YUYV) */ + .ch1_pixel = 0x62000888, /* YUV422 (YUYV) */ + .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR | + PRP_INTR_CH1FC | PRP_INTR_LBOVF, + .csicr1 = CSICR1_SWAP16_EN, + } + }, + { + .in_fmt = V4L2_MBUS_FMT_YUYV8_2X8, + .out_fmt = V4L2_PIX_FMT_YUYV, + .cfg = { + .channel = 1, + .in_fmt = PRP_CNTL_DATA_IN_YUV422, + .out_fmt = PRP_CNTL_CH1_OUT_YUV422, + .src_pixel = 0x22000888, /* YUV422 (YUYV) */ + .ch1_pixel = 0x62000888, /* YUV422 (YUYV) */ + .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR | + PRP_INTR_CH1FC | PRP_INTR_LBOVF, + .csicr1 = CSICR1_PACK_DIR, + } + }, { .in_fmt = V4L2_MBUS_FMT_YUYV8_2X8, .out_fmt = V4L2_PIX_FMT_YUV420, @@ -441,11 +466,9 @@ static int mx2_camera_add_device(struct soc_camera_device *icd) csicr1 = CSICR1_MCLKEN; - if (cpu_is_mx27()) { + if (cpu_is_mx27()) csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC | CSICR1_RXFF_LEVEL(0); - } else if (cpu_is_mx27()) - csicr1 |= CSICR1_SOF_INTEN | CSICR1_RXFF_LEVEL(2); pcdev->csicr1 = csicr1; writel(pcdev->csicr1, pcdev->base_csi + CSICR1); @@ -1142,6 +1165,18 @@ static int mx2_camera_get_formats(struct soc_camera_device *icd, } } + if (code == V4L2_MBUS_FMT_UYVY8_2X8) { + formats++; + if (xlate) { + xlate->host_fmt = + soc_mbus_get_fmtdesc(V4L2_MBUS_FMT_YUYV8_2X8); + xlate->code = code; + dev_dbg(dev, "Providing host format %s for sensor code %d\n", + xlate->host_fmt->name, code); + xlate++; + } + } + /* Generic pass-trough */ formats++; if (xlate) { @@ -1609,64 +1644,59 @@ static irqreturn_t mx27_camera_emma_irq(int irq_emma, void *data) return IRQ_HANDLED; } -static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev) +static int __devinit mx27_camera_emma_init(struct platform_device *pdev) { - struct resource *res_emma = pcdev->res_emma; + struct mx2_camera_dev *pcdev = platform_get_drvdata(pdev); + struct resource *res_emma; + int irq_emma; int err = 0; - if (!request_mem_region(res_emma->start, resource_size(res_emma), - MX2_CAM_DRV_NAME)) { - err = -EBUSY; + res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1); + irq_emma = platform_get_irq(pdev, 1); + if (!res_emma || !irq_emma) { + dev_err(pcdev->dev, "no EMMA resources\n"); goto out; } - pcdev->base_emma = ioremap(res_emma->start, resource_size(res_emma)); + pcdev->base_emma = devm_request_and_ioremap(pcdev->dev, res_emma); if (!pcdev->base_emma) { - err = -ENOMEM; - goto exit_release; + err = -EADDRNOTAVAIL; + goto out; } - err = request_irq(pcdev->irq_emma, mx27_camera_emma_irq, 0, - MX2_CAM_DRV_NAME, pcdev); + err = devm_request_irq(pcdev->dev, irq_emma, mx27_camera_emma_irq, 0, + MX2_CAM_DRV_NAME, pcdev); if (err) { dev_err(pcdev->dev, "Camera EMMA interrupt register failed \n"); - goto exit_iounmap; + goto out; } - pcdev->clk_emma_ipg = clk_get(pcdev->dev, "emma-ipg"); + pcdev->clk_emma_ipg = devm_clk_get(pcdev->dev, "emma-ipg"); if (IS_ERR(pcdev->clk_emma_ipg)) { err = PTR_ERR(pcdev->clk_emma_ipg); - goto exit_free_irq; + goto out; } clk_prepare_enable(pcdev->clk_emma_ipg); - pcdev->clk_emma_ahb = clk_get(pcdev->dev, "emma-ahb"); + pcdev->clk_emma_ahb = devm_clk_get(pcdev->dev, "emma-ahb"); if (IS_ERR(pcdev->clk_emma_ahb)) { err = PTR_ERR(pcdev->clk_emma_ahb); - goto exit_clk_emma_ipg_put; + goto exit_clk_emma_ipg; } clk_prepare_enable(pcdev->clk_emma_ahb); err = mx27_camera_emma_prp_reset(pcdev); if (err) - goto exit_clk_emma_ahb_put; + goto exit_clk_emma_ahb; return err; -exit_clk_emma_ahb_put: +exit_clk_emma_ahb: clk_disable_unprepare(pcdev->clk_emma_ahb); - clk_put(pcdev->clk_emma_ahb); -exit_clk_emma_ipg_put: +exit_clk_emma_ipg: clk_disable_unprepare(pcdev->clk_emma_ipg); - clk_put(pcdev->clk_emma_ipg); -exit_free_irq: - free_irq(pcdev->irq_emma, pcdev); -exit_iounmap: - iounmap(pcdev->base_emma); -exit_release: - release_mem_region(res_emma->start, resource_size(res_emma)); out: return err; } @@ -1674,9 +1704,8 @@ static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev) static int __devinit mx2_camera_probe(struct platform_device *pdev) { struct mx2_camera_dev *pcdev; - struct resource *res_csi, *res_emma; - void __iomem *base_csi; - int irq_csi, irq_emma; + struct resource *res_csi; + int irq_csi; int err = 0; dev_dbg(&pdev->dev, "initialising\n"); @@ -1689,21 +1718,20 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) goto exit; } - pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL); + pcdev = devm_kzalloc(&pdev->dev, sizeof(*pcdev), GFP_KERNEL); if (!pcdev) { dev_err(&pdev->dev, "Could not allocate pcdev\n"); err = -ENOMEM; goto exit; } - pcdev->clk_csi = clk_get(&pdev->dev, "ahb"); + pcdev->clk_csi = devm_clk_get(&pdev->dev, "ahb"); if (IS_ERR(pcdev->clk_csi)) { dev_err(&pdev->dev, "Could not get csi clock\n"); err = PTR_ERR(pcdev->clk_csi); - goto exit_kfree; + goto exit; } - pcdev->res_csi = res_csi; pcdev->pdata = pdev->dev.platform_data; if (pcdev->pdata) { long rate; @@ -1713,11 +1741,11 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2); if (rate <= 0) { err = -ENODEV; - goto exit_dma_free; + goto exit; } err = clk_set_rate(pcdev->clk_csi, rate); if (err < 0) - goto exit_dma_free; + goto exit; } INIT_LIST_HEAD(&pcdev->capture); @@ -1725,50 +1753,36 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) INIT_LIST_HEAD(&pcdev->discard); spin_lock_init(&pcdev->lock); - /* - * Request the regions. - */ - if (!request_mem_region(res_csi->start, resource_size(res_csi), - MX2_CAM_DRV_NAME)) { - err = -EBUSY; - goto exit_dma_free; + pcdev->base_csi = devm_request_and_ioremap(&pdev->dev, res_csi); + if (!pcdev->base_csi) { + err = -EADDRNOTAVAIL; + goto exit; } - base_csi = ioremap(res_csi->start, resource_size(res_csi)); - if (!base_csi) { - err = -ENOMEM; - goto exit_release; - } - pcdev->irq_csi = irq_csi; - pcdev->base_csi = base_csi; - pcdev->base_dma = res_csi->start; pcdev->dev = &pdev->dev; + platform_set_drvdata(pdev, pcdev); if (cpu_is_mx25()) { - err = request_irq(pcdev->irq_csi, mx25_camera_irq, 0, - MX2_CAM_DRV_NAME, pcdev); + err = devm_request_irq(&pdev->dev, irq_csi, mx25_camera_irq, 0, + MX2_CAM_DRV_NAME, pcdev); if (err) { dev_err(pcdev->dev, "Camera interrupt register failed \n"); - goto exit_iounmap; + goto exit; } } if (cpu_is_mx27()) { - /* EMMA support */ - res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1); - irq_emma = platform_get_irq(pdev, 1); - - if (!res_emma || !irq_emma) { - dev_err(&pdev->dev, "no EMMA resources\n"); - goto exit_free_irq; - } - - pcdev->res_emma = res_emma; - pcdev->irq_emma = irq_emma; - if (mx27_camera_emma_init(pcdev)) - goto exit_free_irq; + err = mx27_camera_emma_init(pdev); + if (err) + goto exit; } + /* + * We're done with drvdata here. Clear the pointer so that + * v4l2 core can start using drvdata on its purpose. + */ + platform_set_drvdata(pdev, NULL); + pcdev->soc_host.drv_name = MX2_CAM_DRV_NAME, pcdev->soc_host.ops = &mx2_soc_camera_host_ops, pcdev->soc_host.priv = pcdev; @@ -1795,25 +1809,9 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); eallocctx: if (cpu_is_mx27()) { - free_irq(pcdev->irq_emma, pcdev); clk_disable_unprepare(pcdev->clk_emma_ipg); - clk_put(pcdev->clk_emma_ipg); clk_disable_unprepare(pcdev->clk_emma_ahb); - clk_put(pcdev->clk_emma_ahb); - iounmap(pcdev->base_emma); - release_mem_region(pcdev->res_emma->start, resource_size(pcdev->res_emma)); } -exit_free_irq: - if (cpu_is_mx25()) - free_irq(pcdev->irq_csi, pcdev); -exit_iounmap: - iounmap(base_csi); -exit_release: - release_mem_region(res_csi->start, resource_size(res_csi)); -exit_dma_free: - clk_put(pcdev->clk_csi); -exit_kfree: - kfree(pcdev); exit: return err; } @@ -1823,35 +1821,16 @@ static int __devexit mx2_camera_remove(struct platform_device *pdev) struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); struct mx2_camera_dev *pcdev = container_of(soc_host, struct mx2_camera_dev, soc_host); - struct resource *res; - - clk_put(pcdev->clk_csi); - if (cpu_is_mx25()) - free_irq(pcdev->irq_csi, pcdev); - if (cpu_is_mx27()) - free_irq(pcdev->irq_emma, pcdev); soc_camera_host_unregister(&pcdev->soc_host); vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); - iounmap(pcdev->base_csi); - if (cpu_is_mx27()) { clk_disable_unprepare(pcdev->clk_emma_ipg); - clk_put(pcdev->clk_emma_ipg); clk_disable_unprepare(pcdev->clk_emma_ahb); - clk_put(pcdev->clk_emma_ahb); - iounmap(pcdev->base_emma); - res = pcdev->res_emma; - release_mem_region(res->start, resource_size(res)); } - res = pcdev->res_csi; - release_mem_region(res->start, resource_size(res)); - - kfree(pcdev); - dev_info(&pdev->dev, "MX2 Camera driver unloaded\n"); return 0; diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/platform/soc_camera/mx3_camera.c similarity index 99% rename from drivers/media/video/mx3_camera.c rename to drivers/media/platform/soc_camera/mx3_camera.c index af2297dd49c8d7277000a03c2c4083ca0598aaa4..16975c6e69057f7799baf568a589d700d623a7a7 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/platform/soc_camera/mx3_camera.c @@ -1171,9 +1171,7 @@ static int __devinit mx3_camera_probe(struct platform_device *pdev) mx3_cam->pdata = pdev->dev.platform_data; mx3_cam->platform_flags = mx3_cam->pdata->flags; - if (!(mx3_cam->platform_flags & (MX3_CAMERA_DATAWIDTH_4 | - MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10 | - MX3_CAMERA_DATAWIDTH_15))) { + if (!(mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_MASK)) { /* * Platform hasn't set available data widths. This is bad. * Warn and use a default. diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c similarity index 99% rename from drivers/media/video/omap1_camera.c rename to drivers/media/platform/soc_camera/omap1_camera.c index c7e41145041fc0cc77ed0ce421070b9a0ca22432..fa08c7695ccb05aa61d680d8bcf4f002516d2894 100644 --- a/drivers/media/video/omap1_camera.c +++ b/drivers/media/platform/soc_camera/omap1_camera.c @@ -12,7 +12,7 @@ * Copyright (C) 2008, Guennadi Liakhovetski * * Hardware specific bits initialy based on former work by Matt Callow - * drivers/media/video/omap/omap1510cam.c + * drivers/media/platform/omap/omap1510cam.c * Copyright (C) 2006 Matt Callow * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/platform/soc_camera/pxa_camera.c similarity index 100% rename from drivers/media/video/pxa_camera.c rename to drivers/media/platform/soc_camera/pxa_camera.c diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c similarity index 99% rename from drivers/media/video/sh_mobile_ceu_camera.c rename to drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c index 0baaf94db7e03081d71770a0076fb4c1516e718e..0a24253dcda2a9afd42d4a2bfb017a5c016171ac 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c @@ -1263,7 +1263,7 @@ static void update_subrect(struct sh_mobile_ceu_cam *cam) * 3. if (2) failed, try to request the maximum image */ static int client_s_crop(struct soc_camera_device *icd, struct v4l2_crop *crop, - struct v4l2_crop *cam_crop) + const struct v4l2_crop *cam_crop) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct v4l2_rect *rect = &crop->c, *cam_rect = &cam_crop->c; @@ -1517,7 +1517,7 @@ static int client_scale(struct soc_camera_device *icd, * scaling and cropping algorithms and for the meaning of referenced here steps. */ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, - struct v4l2_crop *a) + const struct v4l2_crop *a) { struct v4l2_rect *rect = &a->c; struct device *dev = icd->parent; diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/platform/soc_camera/sh_mobile_csi2.c similarity index 100% rename from drivers/media/video/sh_mobile_csi2.c rename to drivers/media/platform/soc_camera/sh_mobile_csi2.c diff --git a/drivers/media/video/soc_camera.c b/drivers/media/platform/soc_camera/soc_camera.c similarity index 91% rename from drivers/media/video/soc_camera.c rename to drivers/media/platform/soc_camera/soc_camera.c index 1bde255e45dfcd4554594e6fd5f844d130fa5d16..3be92944f8e7efd7e44d8ff0f7acf37c8f8af084 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/platform/soc_camera/soc_camera.c @@ -50,66 +50,77 @@ static LIST_HEAD(hosts); static LIST_HEAD(devices); static DEFINE_MUTEX(list_lock); /* Protects the list of hosts */ -static int soc_camera_power_on(struct soc_camera_device *icd, - struct soc_camera_link *icl) +int soc_camera_power_on(struct device *dev, struct soc_camera_link *icl) { - struct v4l2_subdev *sd = soc_camera_to_subdev(icd); int ret = regulator_bulk_enable(icl->num_regulators, icl->regulators); if (ret < 0) { - dev_err(icd->pdev, "Cannot enable regulators\n"); + dev_err(dev, "Cannot enable regulators\n"); return ret; } if (icl->power) { - ret = icl->power(icd->control, 1); + ret = icl->power(dev, 1); if (ret < 0) { - dev_err(icd->pdev, + dev_err(dev, "Platform failed to power-on the camera.\n"); - goto elinkpwr; + regulator_bulk_disable(icl->num_regulators, + icl->regulators); } } - ret = v4l2_subdev_call(sd, core, s_power, 1); - if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) - goto esdpwr; - - return 0; - -esdpwr: - if (icl->power) - icl->power(icd->control, 0); -elinkpwr: - regulator_bulk_disable(icl->num_regulators, - icl->regulators); return ret; } +EXPORT_SYMBOL(soc_camera_power_on); -static int soc_camera_power_off(struct soc_camera_device *icd, - struct soc_camera_link *icl) +int soc_camera_power_off(struct device *dev, struct soc_camera_link *icl) { - struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - int ret = v4l2_subdev_call(sd, core, s_power, 0); - - if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) - return ret; + int ret = 0; + int err; if (icl->power) { - ret = icl->power(icd->control, 0); - if (ret < 0) { - dev_err(icd->pdev, + err = icl->power(dev, 0); + if (err < 0) { + dev_err(dev, "Platform failed to power-off the camera.\n"); - return ret; + ret = err; } } - ret = regulator_bulk_disable(icl->num_regulators, + err = regulator_bulk_disable(icl->num_regulators, icl->regulators); - if (ret < 0) - dev_err(icd->pdev, "Cannot disable regulators\n"); + if (err < 0) { + dev_err(dev, "Cannot disable regulators\n"); + ret = ret ? : err; + } return ret; } +EXPORT_SYMBOL(soc_camera_power_off); + +static int __soc_camera_power_on(struct soc_camera_device *icd) +{ + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + int ret; + + ret = v4l2_subdev_call(sd, core, s_power, 1); + if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) + return ret; + + return 0; +} + +static int __soc_camera_power_off(struct soc_camera_device *icd) +{ + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + int ret; + + ret = v4l2_subdev_call(sd, core, s_power, 0); + if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) + return ret; + + return 0; +} const struct soc_camera_format_xlate *soc_camera_xlate_by_fourcc( struct soc_camera_device *icd, unsigned int fourcc) @@ -508,9 +519,12 @@ static int soc_camera_open(struct file *file) ici = to_soc_camera_host(icd->parent); + if (mutex_lock_interruptible(&icd->video_lock)) + return -ERESTARTSYS; if (!try_module_get(ici->ops->owner)) { dev_err(icd->pdev, "Couldn't lock capture bus driver.\n"); - return -EINVAL; + ret = -EINVAL; + goto emodule; } icd->use_count++; @@ -543,7 +557,7 @@ static int soc_camera_open(struct file *file) goto eiciadd; } - ret = soc_camera_power_on(icd, icl); + ret = __soc_camera_power_on(icd); if (ret < 0) goto epower; @@ -571,6 +585,7 @@ static int soc_camera_open(struct file *file) } v4l2_ctrl_handler_setup(&icd->ctrl_handler); } + mutex_unlock(&icd->video_lock); file->private_data = icd; dev_dbg(icd->pdev, "camera device open\n"); @@ -585,12 +600,14 @@ static int soc_camera_open(struct file *file) esfmt: pm_runtime_disable(&icd->vdev->dev); eresume: - soc_camera_power_off(icd, icl); + __soc_camera_power_off(icd); epower: ici->ops->remove(icd); eiciadd: icd->use_count--; module_put(ici->ops->owner); +emodule: + mutex_unlock(&icd->video_lock); return ret; } @@ -600,10 +617,9 @@ static int soc_camera_close(struct file *file) struct soc_camera_device *icd = file->private_data; struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + mutex_lock(&icd->video_lock); icd->use_count--; if (!icd->use_count) { - struct soc_camera_link *icl = to_soc_camera_link(icd); - pm_runtime_suspend(&icd->vdev->dev); pm_runtime_disable(&icd->vdev->dev); @@ -611,11 +627,12 @@ static int soc_camera_close(struct file *file) vb2_queue_release(&icd->vb2_vidq); ici->ops->remove(icd); - soc_camera_power_off(icd, icl); + __soc_camera_power_off(icd); } if (icd->streamer == file) icd->streamer = NULL; + mutex_unlock(&icd->video_lock); module_put(ici->ops->owner); @@ -646,10 +663,13 @@ static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma) if (icd->streamer != file) return -EBUSY; + if (mutex_lock_interruptible(&icd->video_lock)) + return -ERESTARTSYS; if (ici->ops->init_videobuf) err = videobuf_mmap_mapper(&icd->vb_vidq, vma); else err = vb2_mmap(&icd->vb2_vidq, vma); + mutex_unlock(&icd->video_lock); dev_dbg(icd->pdev, "vma start=0x%08lx, size=%ld, ret=%d\n", (unsigned long)vma->vm_start, @@ -663,16 +683,18 @@ static unsigned int soc_camera_poll(struct file *file, poll_table *pt) { struct soc_camera_device *icd = file->private_data; struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + unsigned res = POLLERR; if (icd->streamer != file) - return -EBUSY; - - if (ici->ops->init_videobuf && list_empty(&icd->vb_vidq.stream)) { - dev_err(icd->pdev, "Trying to poll with no queued buffers!\n"); return POLLERR; - } - return ici->ops->poll(file, pt); + mutex_lock(&icd->video_lock); + if (ici->ops->init_videobuf && list_empty(&icd->vb_vidq.stream)) + dev_err(icd->pdev, "Trying to poll with no queued buffers!\n"); + else + res = ici->ops->poll(file, pt); + mutex_unlock(&icd->video_lock); + return res; } void soc_camera_lock(struct vb2_queue *vq) @@ -866,11 +888,11 @@ static int soc_camera_g_crop(struct file *file, void *fh, * retrieve it. */ static int soc_camera_s_crop(struct file *file, void *fh, - struct v4l2_crop *a) + const struct v4l2_crop *a) { struct soc_camera_device *icd = file->private_data; struct soc_camera_host *ici = to_soc_camera_host(icd->parent); - struct v4l2_rect *rect = &a->c; + const struct v4l2_rect *rect = &a->c; struct v4l2_crop current_crop; int ret; @@ -903,6 +925,65 @@ static int soc_camera_s_crop(struct file *file, void *fh, return ret; } +static int soc_camera_g_selection(struct file *file, void *fh, + struct v4l2_selection *s) +{ + struct soc_camera_device *icd = file->private_data; + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + + /* With a wrong type no need to try to fall back to cropping */ + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!ici->ops->get_selection) + return -ENOTTY; + + return ici->ops->get_selection(icd, s); +} + +static int soc_camera_s_selection(struct file *file, void *fh, + struct v4l2_selection *s) +{ + struct soc_camera_device *icd = file->private_data; + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + int ret; + + /* In all these cases cropping emulation will not help */ + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + (s->target != V4L2_SEL_TGT_COMPOSE_ACTIVE && + s->target != V4L2_SEL_TGT_CROP_ACTIVE)) + return -EINVAL; + + if (s->target == V4L2_SEL_TGT_COMPOSE_ACTIVE) { + /* No output size change during a running capture! */ + if (is_streaming(ici, icd) && + (icd->user_width != s->r.width || + icd->user_height != s->r.height)) + return -EBUSY; + + /* + * Only one user is allowed to change the output format, touch + * buffers, start / stop streaming, poll for data + */ + if (icd->streamer && icd->streamer != file) + return -EBUSY; + } + + if (!ici->ops->set_selection) + return -ENOTTY; + + ret = ici->ops->set_selection(icd, s); + if (!ret && + s->target == V4L2_SEL_TGT_COMPOSE_ACTIVE) { + icd->user_width = s->r.width; + icd->user_height = s->r.height; + if (!icd->streamer) + icd->streamer = file; + } + + return ret; +} + static int soc_camera_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a) { @@ -1065,16 +1146,6 @@ static int soc_camera_probe(struct soc_camera_device *icd) if (ret < 0) goto eadd; - /* - * This will not yet call v4l2_subdev_core_ops::s_power(1), because the - * subdevice has not been initialised yet. We'll have to call it once - * again after initialisation, even though it shouldn't be needed, we - * don't do any IO here. - */ - ret = soc_camera_power_on(icd, icl); - if (ret < 0) - goto epower; - /* Must have icd->vdev before registering the device */ ret = video_dev_create(icd); if (ret < 0) @@ -1113,7 +1184,7 @@ static int soc_camera_probe(struct soc_camera_device *icd) sd->grp_id = soc_camera_grp_id(icd); v4l2_set_subdev_hostdata(sd, icd); - if (v4l2_ctrl_add_handler(&icd->ctrl_handler, sd->ctrl_handler)) + if (v4l2_ctrl_add_handler(&icd->ctrl_handler, sd->ctrl_handler, NULL)) goto ectrl; /* At this point client .probe() should have run already */ @@ -1134,10 +1205,6 @@ static int soc_camera_probe(struct soc_camera_device *icd) if (ret < 0) goto evidstart; - ret = v4l2_subdev_call(sd, core, s_power, 1); - if (ret < 0 && ret != -ENOIOCTLCMD) - goto esdpwr; - /* Try to improve our guess of a reasonable window format */ if (!v4l2_subdev_call(sd, video, g_mbus_fmt, &mf)) { icd->user_width = mf.width; @@ -1148,14 +1215,10 @@ static int soc_camera_probe(struct soc_camera_device *icd) ici->ops->remove(icd); - soc_camera_power_off(icd, icl); - mutex_unlock(&icd->video_lock); return 0; -esdpwr: - video_unregister_device(icd->vdev); evidstart: mutex_unlock(&icd->video_lock); soc_camera_free_user_formats(icd); @@ -1172,8 +1235,6 @@ static int soc_camera_probe(struct soc_camera_device *icd) video_device_release(icd->vdev); icd->vdev = NULL; evdc: - soc_camera_power_off(icd, icl); -epower: ici->ops->remove(icd); eadd: regulator_bulk_free(icl->num_regulators, icl->regulators); @@ -1228,7 +1289,7 @@ static int default_g_crop(struct soc_camera_device *icd, struct v4l2_crop *a) return v4l2_subdev_call(sd, video, g_crop, a); } -static int default_s_crop(struct soc_camera_device *icd, struct v4l2_crop *a) +static int default_s_crop(struct soc_camera_device *icd, const struct v4l2_crop *a) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); return v4l2_subdev_call(sd, video, s_crop, a); @@ -1406,6 +1467,8 @@ static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = { .vidioc_cropcap = soc_camera_cropcap, .vidioc_g_crop = soc_camera_g_crop, .vidioc_s_crop = soc_camera_s_crop, + .vidioc_g_selection = soc_camera_g_selection, + .vidioc_s_selection = soc_camera_s_selection, .vidioc_g_parm = soc_camera_g_parm, .vidioc_s_parm = soc_camera_s_parm, .vidioc_g_chip_ident = soc_camera_g_chip_ident, @@ -1433,10 +1496,6 @@ static int video_dev_create(struct soc_camera_device *icd) vdev->tvnorms = V4L2_STD_UNKNOWN; vdev->ctrl_handler = &icd->ctrl_handler; vdev->lock = &icd->video_lock; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags); icd->vdev = vdev; diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/platform/soc_camera/soc_camera_platform.c similarity index 94% rename from drivers/media/video/soc_camera_platform.c rename to drivers/media/platform/soc_camera/soc_camera_platform.c index f59ccade07c8b5cb9a0c3ebb4c4bdb539e2cbea8..7cf7fd16481fbd65f8820a3374ca4009de68eee7 100644 --- a/drivers/media/video/soc_camera_platform.c +++ b/drivers/media/platform/soc_camera/soc_camera_platform.c @@ -50,7 +50,16 @@ static int soc_camera_platform_fill_fmt(struct v4l2_subdev *sd, return 0; } -static struct v4l2_subdev_core_ops platform_subdev_core_ops; +static int soc_camera_platform_s_power(struct v4l2_subdev *sd, int on) +{ + struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd); + + return soc_camera_set_power(p->icd->control, p->icd->link, on); +} + +static struct v4l2_subdev_core_ops platform_subdev_core_ops = { + .s_power = soc_camera_platform_s_power, +}; static int soc_camera_platform_enum_fmt(struct v4l2_subdev *sd, unsigned int index, enum v4l2_mbus_pixelcode *code) diff --git a/drivers/media/video/soc_mediabus.c b/drivers/media/platform/soc_camera/soc_mediabus.c similarity index 100% rename from drivers/media/video/soc_mediabus.c rename to drivers/media/platform/soc_camera/soc_mediabus.c diff --git a/drivers/media/video/timblogiw.c b/drivers/media/platform/timblogiw.c similarity index 100% rename from drivers/media/video/timblogiw.c rename to drivers/media/platform/timblogiw.c diff --git a/drivers/media/video/via-camera.c b/drivers/media/platform/via-camera.c similarity index 100% rename from drivers/media/video/via-camera.c rename to drivers/media/platform/via-camera.c diff --git a/drivers/media/video/via-camera.h b/drivers/media/platform/via-camera.h similarity index 100% rename from drivers/media/video/via-camera.h rename to drivers/media/platform/via-camera.h diff --git a/drivers/media/video/vino.c b/drivers/media/platform/vino.c similarity index 99% rename from drivers/media/video/vino.c rename to drivers/media/platform/vino.c index aae1720b2f2d14a0ceb1ca1080fafdb125d28fc4..790d96cffeea7d7ca0bbb808a23173e3b77373df 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/platform/vino.c @@ -3284,7 +3284,7 @@ static int vino_g_crop(struct file *file, void *__fh, } static int vino_s_crop(struct file *file, void *__fh, - struct v4l2_crop *c) + const struct v4l2_crop *c) { struct vino_channel_settings *vcs = video_drvdata(file); unsigned long flags; diff --git a/drivers/media/video/vino.h b/drivers/media/platform/vino.h similarity index 100% rename from drivers/media/video/vino.h rename to drivers/media/platform/vino.h diff --git a/drivers/media/video/vivi.c b/drivers/media/platform/vivi.c similarity index 97% rename from drivers/media/video/vivi.c rename to drivers/media/platform/vivi.c index a05494b71b20a7247a8bfb27c05304dcf8ae3272..b366b050a3dd487473345d1ddaee013b2740513f 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/platform/vivi.c @@ -80,7 +80,8 @@ static const u8 *font8x16; struct vivi_fmt { char *name; u32 fourcc; /* v4l2 format id */ - int depth; + u8 depth; + bool is_yuv; }; static struct vivi_fmt formats[] = { @@ -88,21 +89,25 @@ static struct vivi_fmt formats[] = { .name = "4:2:2, packed, YUYV", .fourcc = V4L2_PIX_FMT_YUYV, .depth = 16, + .is_yuv = true, }, { .name = "4:2:2, packed, UYVY", .fourcc = V4L2_PIX_FMT_UYVY, .depth = 16, + .is_yuv = true, }, { .name = "4:2:2, packed, YVYU", .fourcc = V4L2_PIX_FMT_YVYU, .depth = 16, + .is_yuv = true, }, { .name = "4:2:2, packed, VYUY", .fourcc = V4L2_PIX_FMT_VYUY, .depth = 16, + .is_yuv = true, }, { .name = "RGB565 (LE)", @@ -309,15 +314,9 @@ static void precalculate_bars(struct vivi_dev *dev) r = bars[dev->input].bar[k][0]; g = bars[dev->input].bar[k][1]; b = bars[dev->input].bar[k][2]; - is_yuv = 0; + is_yuv = dev->fmt->is_yuv; switch (dev->fmt->fourcc) { - case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: - case V4L2_PIX_FMT_YVYU: - case V4L2_PIX_FMT_VYUY: - is_yuv = 1; - break; case V4L2_PIX_FMT_RGB565: case V4L2_PIX_FMT_RGB565X: r >>= 3; @@ -330,6 +329,10 @@ static void precalculate_bars(struct vivi_dev *dev) g >>= 3; b >>= 3; break; + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_YVYU: + case V4L2_PIX_FMT_VYUY: case V4L2_PIX_FMT_RGB24: case V4L2_PIX_FMT_BGR24: case V4L2_PIX_FMT_RGB32: @@ -895,7 +898,8 @@ static int vidioc_querycap(struct file *file, void *priv, strcpy(cap->driver, "vivi"); strcpy(cap->card, "vivi"); - strlcpy(cap->bus_info, dev->v4l2_dev.name, sizeof(cap->bus_info)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:%s", dev->v4l2_dev.name); cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; @@ -930,8 +934,7 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, (f->fmt.pix.width * dev->fmt->depth) >> 3; f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; - if (dev->fmt->fourcc == V4L2_PIX_FMT_YUYV || - dev->fmt->fourcc == V4L2_PIX_FMT_UYVY) + if (dev->fmt->is_yuv) f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; else f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; @@ -959,11 +962,11 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, (f->fmt.pix.width * fmt->depth) >> 3; f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; - if (fmt->fourcc == V4L2_PIX_FMT_YUYV || - fmt->fourcc == V4L2_PIX_FMT_UYVY) + if (fmt->is_yuv) f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; else f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; + f->fmt.pix.priv = 0; return 0; } @@ -990,6 +993,27 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, return 0; } +static int vidioc_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + static const struct v4l2_frmsize_stepwise sizes = { + 48, MAX_WIDTH, 4, + 32, MAX_HEIGHT, 1 + }; + int i; + + if (fsize->index) + return -EINVAL; + for (i = 0; i < ARRAY_SIZE(formats); i++) + if (formats[i].fourcc == fsize->pixel_format) + break; + if (i == ARRAY_SIZE(formats)) + return -EINVAL; + fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE; + fsize->stepwise = sizes; + return 0; +} + /* only one input in this sample driver */ static int vidioc_enum_input(struct file *file, void *priv, struct v4l2_input *inp) @@ -1174,6 +1198,7 @@ static const struct v4l2_ioctl_ops vivi_ioctl_ops = { .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_enum_framesizes = vidioc_enum_framesizes, .vidioc_reqbufs = vb2_ioctl_reqbufs, .vidioc_create_bufs = vb2_ioctl_create_bufs, .vidioc_prepare_buf = vb2_ioctl_prepare_buf, @@ -1282,7 +1307,6 @@ static int __init vivi_create_instance(int inst) /* initialize queue */ q = &dev->vb_vidq; - memset(q, 0, sizeof(dev->vb_vidq)); q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; q->drv_priv = dev; @@ -1290,7 +1314,9 @@ static int __init vivi_create_instance(int inst) q->ops = &vivi_video_qops; q->mem_ops = &vb2_vmalloc_memops; - vb2_queue_init(q); + ret = vb2_queue_init(q); + if (ret) + goto unreg_dev; mutex_init(&dev->mutex); diff --git a/drivers/media/radio/radio-keene.c b/drivers/media/radio/radio-keene.c index 79adf3e654e5f57d678199539be2c153daf40265..e10e525f33e51f0a14b5c3f5b7ef0006ae3524cb 100644 --- a/drivers/media/radio/radio-keene.c +++ b/drivers/media/radio/radio-keene.c @@ -203,7 +203,7 @@ static int vidioc_g_modulator(struct file *file, void *priv, } static int vidioc_s_modulator(struct file *file, void *priv, - struct v4l2_modulator *v) + const struct v4l2_modulator *v) { struct keene_device *radio = video_drvdata(file); diff --git a/drivers/media/radio/radio-miropcm20.c b/drivers/media/radio/radio-miropcm20.c index 87c1ee13b058541b0ec9cfa3f0f33c75f173334b..11f76ed4c6fb7082e6f9de5f3ba717cab9f40faa 100644 --- a/drivers/media/radio/radio-miropcm20.c +++ b/drivers/media/radio/radio-miropcm20.c @@ -197,7 +197,7 @@ static int vidioc_g_audio(struct file *file, void *priv, } static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) + const struct v4l2_audio *a) { return a->index ? -EINVAL : 0; } diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index 3182b26d6efa8f99cb50fdc7d81d5b9681782ab9..9c5a267b60b46f80f35a0326771cffa3666a12c9 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -348,7 +348,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, } static int vidioc_s_hw_freq_seek(struct file *file, void *priv, - struct v4l2_hw_freq_seek *seek) + const struct v4l2_hw_freq_seek *seek) { static u8 buf[8] = { 0x3d, 0x32, 0x0f, 0x08, 0x3d, 0x32, 0x0f, 0x08 @@ -360,6 +360,9 @@ static int vidioc_s_hw_freq_seek(struct file *file, void *priv, if (seek->tuner != 0 || !seek->wrap_around) return -EINVAL; + if (file->f_flags & O_NONBLOCK) + return -EWOULDBLOCK; + retval = amradio_send_cmd(radio, AMRADIO_SET_SEARCH_LVL, 0, buf, 8, false); if (retval) diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index 8185d5fbfa89af74cf0153a822659a69e4846f8b..227dcdb54df358235111f42518686b404317b76a 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -239,7 +239,7 @@ static int vidioc_g_audio(struct file *file, void *priv, } static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) + const struct v4l2_audio *a) { return a->index ? -EINVAL : 0; } diff --git a/drivers/media/radio/radio-shark.c b/drivers/media/radio/radio-shark.c index 72ded29728bbb2cbf459184095be31cf45a81270..8c309c7134d7f0e0abb60be8a83e03578e2cfc9e 100644 --- a/drivers/media/radio/radio-shark.c +++ b/drivers/media/radio/radio-shark.c @@ -59,7 +59,8 @@ MODULE_LICENSE("GPL"); #define v4l2_dev_to_shark(d) container_of(d, struct shark_device, v4l2_dev) -enum { BLUE_LED, BLUE_PULSE_LED, RED_LED, NO_LEDS }; +/* Note BLUE_IS_PULSE comes after NO_LEDS as it is a status bit, not a LED */ +enum { BLUE_LED, BLUE_PULSE_LED, RED_LED, NO_LEDS, BLUE_IS_PULSE }; struct shark_device { struct usb_device *usbdev; @@ -190,6 +191,7 @@ static void shark_led_set_blue(struct led_classdev *led_cdev, atomic_set(&shark->brightness[BLUE_LED], value); set_bit(BLUE_LED, &shark->brightness_new); + clear_bit(BLUE_IS_PULSE, &shark->brightness_new); schedule_work(&shark->led_work); } @@ -201,6 +203,7 @@ static void shark_led_set_blue_pulse(struct led_classdev *led_cdev, atomic_set(&shark->brightness[BLUE_PULSE_LED], 256 - value); set_bit(BLUE_PULSE_LED, &shark->brightness_new); + set_bit(BLUE_IS_PULSE, &shark->brightness_new); schedule_work(&shark->led_work); } @@ -240,6 +243,7 @@ static int shark_register_leds(struct shark_device *shark, struct device *dev) { int i, retval; + atomic_set(&shark->brightness[BLUE_LED], 127); INIT_WORK(&shark->led_work, shark_led_work); for (i = 0; i < NO_LEDS; i++) { shark->leds[i] = shark_led_templates[i]; @@ -266,6 +270,16 @@ static void shark_unregister_leds(struct shark_device *shark) cancel_work_sync(&shark->led_work); } + +static void shark_resume_leds(struct shark_device *shark) +{ + if (test_bit(BLUE_IS_PULSE, &shark->brightness_new)) + set_bit(BLUE_PULSE_LED, &shark->brightness_new); + else + set_bit(BLUE_LED, &shark->brightness_new); + set_bit(RED_LED, &shark->brightness_new); + schedule_work(&shark->led_work); +} #else static int shark_register_leds(struct shark_device *shark, struct device *dev) { @@ -274,6 +288,7 @@ static int shark_register_leds(struct shark_device *shark, struct device *dev) return 0; } static inline void shark_unregister_leds(struct shark_device *shark) { } +static inline void shark_resume_leds(struct shark_device *shark) { } #endif static void usb_shark_disconnect(struct usb_interface *intf) @@ -333,6 +348,7 @@ static int usb_shark_probe(struct usb_interface *intf, shark->tea.radio_nr = -1; shark->tea.ops = &shark_tea_ops; shark->tea.cannot_mute = true; + shark->tea.has_am = true; strlcpy(shark->tea.card, "Griffin radioSHARK", sizeof(shark->tea.card)); usb_make_path(shark->usbdev, shark->tea.bus_info, @@ -358,6 +374,27 @@ static int usb_shark_probe(struct usb_interface *intf, return retval; } +#ifdef CONFIG_PM +static int usb_shark_suspend(struct usb_interface *intf, pm_message_t message) +{ + return 0; +} + +static int usb_shark_resume(struct usb_interface *intf) +{ + struct v4l2_device *v4l2_dev = usb_get_intfdata(intf); + struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev); + + mutex_lock(&shark->tea.mutex); + snd_tea575x_set_freq(&shark->tea); + mutex_unlock(&shark->tea.mutex); + + shark_resume_leds(shark); + + return 0; +} +#endif + /* Specify the bcdDevice value, as the radioSHARK and radioSHARK2 share ids */ static struct usb_device_id usb_shark_device_table[] = { { .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION | @@ -377,5 +414,10 @@ static struct usb_driver usb_shark_driver = { .probe = usb_shark_probe, .disconnect = usb_shark_disconnect, .id_table = usb_shark_device_table, +#ifdef CONFIG_PM + .suspend = usb_shark_suspend, + .resume = usb_shark_resume, + .reset_resume = usb_shark_resume, +#endif }; module_usb_driver(usb_shark_driver); diff --git a/drivers/media/radio/radio-shark2.c b/drivers/media/radio/radio-shark2.c index 7b4efdfaae283748edea0dc359ae647667add6b6..ef65ebbd536451a276244e0119da4b2674fe97b1 100644 --- a/drivers/media/radio/radio-shark2.c +++ b/drivers/media/radio/radio-shark2.c @@ -86,12 +86,8 @@ static int shark_write_reg(struct radio_tea5777 *tea, u64 reg) for (i = 0; i < 6; i++) shark->transfer_buffer[i + 1] = (reg >> (40 - i * 8)) & 0xff; - v4l2_dbg(1, debug, tea->v4l2_dev, - "shark2-write: %02x %02x %02x %02x %02x %02x %02x\n", - shark->transfer_buffer[0], shark->transfer_buffer[1], - shark->transfer_buffer[2], shark->transfer_buffer[3], - shark->transfer_buffer[4], shark->transfer_buffer[5], - shark->transfer_buffer[6]); + v4l2_dbg(1, debug, tea->v4l2_dev, "shark2-write: %*ph\n", + 7, shark->transfer_buffer); res = usb_interrupt_msg(shark->usbdev, usb_sndintpipe(shark->usbdev, SHARK_OUT_EP), @@ -134,9 +130,8 @@ static int shark_read_reg(struct radio_tea5777 *tea, u32 *reg_ret) for (i = 0; i < 3; i++) reg |= shark->transfer_buffer[i] << (16 - i * 8); - v4l2_dbg(1, debug, tea->v4l2_dev, "shark2-read: %02x %02x %02x\n", - shark->transfer_buffer[0], shark->transfer_buffer[1], - shark->transfer_buffer[2]); + v4l2_dbg(1, debug, tea->v4l2_dev, "shark2-read: %*ph\n", + 3, shark->transfer_buffer); *reg_ret = reg; return 0; @@ -214,6 +209,7 @@ static int shark_register_leds(struct shark_device *shark, struct device *dev) { int i, retval; + atomic_set(&shark->brightness[BLUE_LED], 127); INIT_WORK(&shark->led_work, shark_led_work); for (i = 0; i < NO_LEDS; i++) { shark->leds[i] = shark_led_templates[i]; @@ -240,6 +236,16 @@ static void shark_unregister_leds(struct shark_device *shark) cancel_work_sync(&shark->led_work); } + +static void shark_resume_leds(struct shark_device *shark) +{ + int i; + + for (i = 0; i < NO_LEDS; i++) + set_bit(i, &shark->brightness_new); + + schedule_work(&shark->led_work); +} #else static int shark_register_leds(struct shark_device *shark, struct device *dev) { @@ -248,6 +254,7 @@ static int shark_register_leds(struct shark_device *shark, struct device *dev) return 0; } static inline void shark_unregister_leds(struct shark_device *shark) { } +static inline void shark_resume_leds(struct shark_device *shark) { } #endif static void usb_shark_disconnect(struct usb_interface *intf) @@ -332,6 +339,28 @@ static int usb_shark_probe(struct usb_interface *intf, return retval; } +#ifdef CONFIG_PM +static int usb_shark_suspend(struct usb_interface *intf, pm_message_t message) +{ + return 0; +} + +static int usb_shark_resume(struct usb_interface *intf) +{ + struct v4l2_device *v4l2_dev = usb_get_intfdata(intf); + struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev); + int ret; + + mutex_lock(&shark->tea.mutex); + ret = radio_tea5777_set_freq(&shark->tea); + mutex_unlock(&shark->tea.mutex); + + shark_resume_leds(shark); + + return ret; +} +#endif + /* Specify the bcdDevice value, as the radioSHARK and radioSHARK2 share ids */ static struct usb_device_id usb_shark_device_table[] = { { .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION | @@ -351,5 +380,10 @@ static struct usb_driver usb_shark_driver = { .probe = usb_shark_probe, .disconnect = usb_shark_disconnect, .id_table = usb_shark_device_table, +#ifdef CONFIG_PM + .suspend = usb_shark_suspend, + .resume = usb_shark_resume, + .reset_resume = usb_shark_resume, +#endif }; module_usb_driver(usb_shark_driver); diff --git a/drivers/media/radio/radio-si4713.c b/drivers/media/radio/radio-si4713.c index c54210c7fef90783200ccec467230fa6a7f3dc69..a082e400ed0f6ed8022fd3562231e5cc969c10d2 100644 --- a/drivers/media/radio/radio-si4713.c +++ b/drivers/media/radio/radio-si4713.c @@ -83,7 +83,7 @@ static int radio_si4713_g_audout(struct file *file, void *priv, } static int radio_si4713_s_audout(struct file *file, void *priv, - struct v4l2_audioout *vao) + const struct v4l2_audioout *vao) { return vao->index ? -EINVAL : 0; } @@ -200,7 +200,7 @@ static int radio_si4713_g_modulator(struct file *file, void *p, } static int radio_si4713_s_modulator(struct file *file, void *p, - struct v4l2_modulator *vm) + const struct v4l2_modulator *vm) { return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner, s_modulator, vm); @@ -268,7 +268,7 @@ static int radio_si4713_pdriver_probe(struct platform_device *pdev) goto exit; } - rsdev = kzalloc(sizeof *rsdev, GFP_KERNEL); + rsdev = devm_kzalloc(&pdev->dev, sizeof(*rsdev), GFP_KERNEL); if (!rsdev) { dev_err(&pdev->dev, "Failed to alloc video device.\n"); rval = -ENOMEM; @@ -278,7 +278,7 @@ static int radio_si4713_pdriver_probe(struct platform_device *pdev) rval = v4l2_device_register(&pdev->dev, &rsdev->v4l2_dev); if (rval) { dev_err(&pdev->dev, "Failed to register v4l2 device.\n"); - goto free_rsdev; + goto exit; } adapter = i2c_get_adapter(pdata->i2c_bus); @@ -322,8 +322,6 @@ static int radio_si4713_pdriver_probe(struct platform_device *pdev) i2c_put_adapter(adapter); unregister_v4l2_dev: v4l2_device_unregister(&rsdev->v4l2_dev); -free_rsdev: - kfree(rsdev); exit: return rval; } @@ -342,7 +340,6 @@ static int __exit radio_si4713_pdriver_remove(struct platform_device *pdev) video_unregister_device(rsdev->radio_dev); i2c_put_adapter(client->adapter); v4l2_device_unregister(&rsdev->v4l2_dev); - kfree(rsdev); return 0; } diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c index 6b1fae32b483525d8933a7d00408f80cb3c63264..d0c905310071e9cb0eba764bef1cc5787720fbd8 100644 --- a/drivers/media/radio/radio-tea5764.c +++ b/drivers/media/radio/radio-tea5764.c @@ -151,8 +151,11 @@ int tea5764_i2c_read(struct tea5764_device *radio) u16 *p = (u16 *) &radio->regs; struct i2c_msg msgs[1] = { - { radio->i2c_client->addr, I2C_M_RD, sizeof(radio->regs), - (void *)&radio->regs }, + { .addr = radio->i2c_client->addr, + .flags = I2C_M_RD, + .len = sizeof(radio->regs), + .buf = (void *)&radio->regs + }, }; if (i2c_transfer(radio->i2c_client->adapter, msgs, 1) != 1) return -EIO; @@ -167,7 +170,11 @@ int tea5764_i2c_write(struct tea5764_device *radio) struct tea5764_write_regs wr; struct tea5764_regs *r = &radio->regs; struct i2c_msg msgs[1] = { - { radio->i2c_client->addr, 0, sizeof(wr), (void *) &wr }, + { + .addr = radio->i2c_client->addr, + .len = sizeof(wr), + .buf = (void *)&wr + }, }; wr.intreg = r->intreg & 0xff; wr.frqset = __cpu_to_be16(r->frqset); @@ -448,7 +455,7 @@ static int vidioc_g_audio(struct file *file, void *priv, } static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) + const struct v4l2_audio *a) { if (a->index != 0) return -EINVAL; diff --git a/drivers/media/radio/radio-tea5777.c b/drivers/media/radio/radio-tea5777.c index 5bc9fa62720b6e23355a2ae54447a95de04d9222..4b5190d4fea5d701b06853bedb5b89408742fb3c 100644 --- a/drivers/media/radio/radio-tea5777.c +++ b/drivers/media/radio/radio-tea5777.c @@ -33,20 +33,17 @@ #include #include #include -#include #include "radio-tea5777.h" MODULE_AUTHOR("Hans de Goede "); MODULE_DESCRIPTION("Routines for control of TEA5777 Philips AM/FM radio tuner chips"); MODULE_LICENSE("GPL"); -/* Fixed FM only band for now, will implement multi-band support when the - VIDIOC_ENUM_FREQ_BANDS API is upstream */ -#define TEA5777_FM_RANGELOW (76000 * 16) -#define TEA5777_FM_RANGEHIGH (108000 * 16) - #define TEA5777_FM_IF 150 /* kHz */ -#define TEA5777_FM_FREQ_STEP 50 /* kHz */ +#define TEA5777_FM_FREQ_STEP 50 /* kHz */ + +#define TEA5777_AM_IF 21 /* kHz */ +#define TEA5777_AM_FREQ_STEP 1 /* kHz */ /* Write reg, common bits */ #define TEA5777_W_MUTE_MASK (1LL << 47) @@ -95,7 +92,7 @@ MODULE_LICENSE("GPL"); #define TEA5777_W_FM_PLL_SHIFT 32 #define TEA5777_W_FM_FREF_MASK (0x03LL << 30) #define TEA5777_W_FM_FREF_SHIFT 30 -#define TEA5777_W_FM_FREF_VALUE 0 /* 50 kHz tune steps, 150 kHz IF */ +#define TEA5777_W_FM_FREF_VALUE 0LL /* 50k steps, 150k IF */ #define TEA5777_W_FM_FORCEMONO_MASK (1LL << 15) #define TEA5777_W_FM_FORCEMONO_SHIFT 15 @@ -116,6 +113,8 @@ MODULE_LICENSE("GPL"); #define TEA5777_W_AM_AGCIF_SHIFT 32 #define TEA5777_W_AM_MWLW_MASK (1LL << 31) #define TEA5777_W_AM_MWLW_SHIFT 31 +#define TEA5777_W_AM_LW 0LL +#define TEA5777_W_AM_MW 1LL #define TEA5777_W_AM_LNA_MASK (1LL << 30) #define TEA5777_W_AM_LNA_SHIFT 30 @@ -148,26 +147,82 @@ MODULE_LICENSE("GPL"); #define TEA5777_R_FM_PLL_MASK 0x1fff #define TEA5777_R_FM_PLL_SHIFT 0 +enum { BAND_FM, BAND_AM }; + +static const struct v4l2_frequency_band bands[] = { + { + .type = V4L2_TUNER_RADIO, + .index = 0, + .capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_FREQ_BANDS | + V4L2_TUNER_CAP_HWSEEK_BOUNDED | + V4L2_TUNER_CAP_HWSEEK_PROG_LIM, + .rangelow = 76000 * 16, + .rangehigh = 108000 * 16, + .modulation = V4L2_BAND_MODULATION_FM, + }, + { + .type = V4L2_TUNER_RADIO, + .index = 1, + .capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS | + V4L2_TUNER_CAP_HWSEEK_BOUNDED | + V4L2_TUNER_CAP_HWSEEK_PROG_LIM, + .rangelow = 530 * 16, + .rangehigh = 1710 * 16, + .modulation = V4L2_BAND_MODULATION_AM, + }, +}; + static u32 tea5777_freq_to_v4l2_freq(struct radio_tea5777 *tea, u32 freq) { - return (freq * TEA5777_FM_FREQ_STEP + TEA5777_FM_IF) * 16; + switch (tea->band) { + case BAND_FM: + return (freq * TEA5777_FM_FREQ_STEP + TEA5777_FM_IF) * 16; + case BAND_AM: + return (freq * TEA5777_AM_FREQ_STEP + TEA5777_AM_IF) * 16; + } + return 0; /* Never reached */ } -static int radio_tea5777_set_freq(struct radio_tea5777 *tea) +int radio_tea5777_set_freq(struct radio_tea5777 *tea) { - u64 freq; + u32 freq; int res; - freq = clamp_t(u32, tea->freq, - TEA5777_FM_RANGELOW, TEA5777_FM_RANGEHIGH) + 8; - do_div(freq, 16); /* to kHz */ - - freq -= TEA5777_FM_IF; - do_div(freq, TEA5777_FM_FREQ_STEP); - - tea->write_reg &= ~(TEA5777_W_FM_PLL_MASK | TEA5777_W_FM_FREF_MASK); - tea->write_reg |= freq << TEA5777_W_FM_PLL_SHIFT; - tea->write_reg |= TEA5777_W_FM_FREF_VALUE << TEA5777_W_FM_FREF_SHIFT; + freq = clamp(tea->freq, bands[tea->band].rangelow, + bands[tea->band].rangehigh); + freq = (freq + 8) / 16; /* to kHz */ + + switch (tea->band) { + case BAND_FM: + tea->write_reg &= ~TEA5777_W_AM_FM_MASK; + freq = (freq - TEA5777_FM_IF) / TEA5777_FM_FREQ_STEP; + tea->write_reg &= ~TEA5777_W_FM_PLL_MASK; + tea->write_reg |= (u64)freq << TEA5777_W_FM_PLL_SHIFT; + tea->write_reg &= ~TEA5777_W_FM_FREF_MASK; + tea->write_reg |= TEA5777_W_FM_FREF_VALUE << + TEA5777_W_FM_FREF_SHIFT; + tea->write_reg &= ~TEA5777_W_FM_FORCEMONO_MASK; + if (tea->audmode == V4L2_TUNER_MODE_MONO) + tea->write_reg |= 1LL << TEA5777_W_FM_FORCEMONO_SHIFT; + break; + case BAND_AM: + tea->write_reg &= ~TEA5777_W_AM_FM_MASK; + tea->write_reg |= (1LL << TEA5777_W_AM_FM_SHIFT); + freq = (freq - TEA5777_AM_IF) / TEA5777_AM_FREQ_STEP; + tea->write_reg &= ~TEA5777_W_AM_PLL_MASK; + tea->write_reg |= (u64)freq << TEA5777_W_AM_PLL_SHIFT; + tea->write_reg &= ~TEA5777_W_AM_AGCRF_MASK; + tea->write_reg &= ~TEA5777_W_AM_AGCRF_MASK; + tea->write_reg &= ~TEA5777_W_AM_MWLW_MASK; + tea->write_reg |= TEA5777_W_AM_MW << TEA5777_W_AM_MWLW_SHIFT; + tea->write_reg &= ~TEA5777_W_AM_LNA_MASK; + tea->write_reg |= 1LL << TEA5777_W_AM_LNA_SHIFT; + tea->write_reg &= ~TEA5777_W_AM_PEAK_MASK; + tea->write_reg |= 1LL << TEA5777_W_AM_PEAK_SHIFT; + tea->write_reg &= ~TEA5777_W_AM_CALLIGN_MASK; + break; + } res = tea->ops->write_reg(tea, tea->write_reg); if (res) @@ -225,6 +280,19 @@ static int vidioc_querycap(struct file *file, void *priv, return 0; } +static int vidioc_enum_freq_bands(struct file *file, void *priv, + struct v4l2_frequency_band *band) +{ + struct radio_tea5777 *tea = video_drvdata(file); + + if (band->tuner != 0 || band->index >= ARRAY_SIZE(bands) || + (!tea->has_am && band->index == BAND_AM)) + return -EINVAL; + + *band = bands[band->index]; + return 0; +} + static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { @@ -245,13 +313,18 @@ static int vidioc_g_tuner(struct file *file, void *priv, strlcpy(v->name, "FM", sizeof(v->name)); v->type = V4L2_TUNER_RADIO; v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | - V4L2_TUNER_CAP_HWSEEK_BOUNDED; - v->rangelow = TEA5777_FM_RANGELOW; - v->rangehigh = TEA5777_FM_RANGEHIGH; - v->rxsubchans = (tea->read_reg & TEA5777_R_FM_STEREO_MASK) ? - V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; - v->audmode = (tea->write_reg & TEA5777_W_FM_FORCEMONO_MASK) ? - V4L2_TUNER_MODE_MONO : V4L2_TUNER_MODE_STEREO; + V4L2_TUNER_CAP_FREQ_BANDS | + V4L2_TUNER_CAP_HWSEEK_BOUNDED | + V4L2_TUNER_CAP_HWSEEK_PROG_LIM; + v->rangelow = tea->has_am ? bands[BAND_AM].rangelow : + bands[BAND_FM].rangelow; + v->rangehigh = bands[BAND_FM].rangehigh; + if (tea->band == BAND_FM && + (tea->read_reg & TEA5777_R_FM_STEREO_MASK)) + v->rxsubchans = V4L2_TUNER_SUB_STEREO; + else + v->rxsubchans = V4L2_TUNER_SUB_MONO; + v->audmode = tea->audmode; /* shift - 12 to convert 4-bits (0-15) scale to 16-bits (0-65535) */ v->signal = (tea->read_reg & TEA5777_R_LEVEL_MASK) >> (TEA5777_R_LEVEL_SHIFT - 12); @@ -266,16 +339,20 @@ static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { struct radio_tea5777 *tea = video_drvdata(file); + u32 orig_audmode = tea->audmode; if (v->index) return -EINVAL; - if (v->audmode == V4L2_TUNER_MODE_MONO) - tea->write_reg |= TEA5777_W_FM_FORCEMONO_MASK; - else - tea->write_reg &= ~TEA5777_W_FM_FORCEMONO_MASK; + if (v->audmode > V4L2_TUNER_MODE_STEREO) + v->audmode = V4L2_TUNER_MODE_STEREO; - return radio_tea5777_set_freq(tea); + tea->audmode = v->audmode; + + if (tea->audmode != orig_audmode && tea->band == BAND_FM) + return radio_tea5777_set_freq(tea); + + return 0; } static int vidioc_g_frequency(struct file *file, void *priv, @@ -298,40 +375,74 @@ static int vidioc_s_frequency(struct file *file, void *priv, if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) return -EINVAL; + if (tea->has_am && f->frequency < (20000 * 16)) + tea->band = BAND_AM; + else + tea->band = BAND_FM; + tea->freq = f->frequency; return radio_tea5777_set_freq(tea); } static int vidioc_s_hw_freq_seek(struct file *file, void *fh, - struct v4l2_hw_freq_seek *a) + const struct v4l2_hw_freq_seek *a) { struct radio_tea5777 *tea = video_drvdata(file); - u32 orig_freq = tea->freq; unsigned long timeout; - int res, spacing = 200 * 16; /* 200 kHz */ - /* These are fixed *for now* */ - const u32 seek_rangelow = TEA5777_FM_RANGELOW; - const u32 seek_rangehigh = TEA5777_FM_RANGEHIGH; + u32 rangelow = a->rangelow; + u32 rangehigh = a->rangehigh; + int i, res, spacing; + u32 orig_freq; if (a->tuner || a->wrap_around) return -EINVAL; + if (file->f_flags & O_NONBLOCK) + return -EWOULDBLOCK; + + if (rangelow || rangehigh) { + for (i = 0; i < ARRAY_SIZE(bands); i++) { + if (i == BAND_AM && !tea->has_am) + continue; + if (bands[i].rangelow >= rangelow && + bands[i].rangehigh <= rangehigh) + break; + } + if (i == ARRAY_SIZE(bands)) + return -EINVAL; /* No matching band found */ + + tea->band = i; + if (tea->freq < rangelow || tea->freq > rangehigh) { + tea->freq = clamp(tea->freq, rangelow, + rangehigh); + res = radio_tea5777_set_freq(tea); + if (res) + return res; + } + } else { + rangelow = bands[tea->band].rangelow; + rangehigh = bands[tea->band].rangehigh; + } + + spacing = (tea->band == BAND_AM) ? (5 * 16) : (200 * 16); /* kHz */ + orig_freq = tea->freq; + tea->write_reg |= TEA5777_W_PROGBLIM_MASK; - if (seek_rangelow != tea->seek_rangelow) { + if (tea->seek_rangelow != rangelow) { tea->write_reg &= ~TEA5777_W_UPDWN_MASK; - tea->freq = seek_rangelow; + tea->freq = rangelow; res = radio_tea5777_set_freq(tea); if (res) goto leave; - tea->seek_rangelow = tea->freq; + tea->seek_rangelow = rangelow; } - if (seek_rangehigh != tea->seek_rangehigh) { + if (tea->seek_rangehigh != rangehigh) { tea->write_reg |= TEA5777_W_UPDWN_MASK; - tea->freq = seek_rangehigh; + tea->freq = rangehigh; res = radio_tea5777_set_freq(tea); if (res) goto leave; - tea->seek_rangehigh = tea->freq; + tea->seek_rangehigh = rangehigh; } tea->write_reg &= ~TEA5777_W_PROGBLIM_MASK; @@ -419,6 +530,7 @@ static const struct v4l2_ioctl_ops tea575x_ioctl_ops = { .vidioc_g_frequency = vidioc_g_frequency, .vidioc_s_frequency = vidioc_s_frequency, .vidioc_s_hw_freq_seek = vidioc_s_hw_freq_seek, + .vidioc_enum_freq_bands = vidioc_enum_freq_bands, .vidioc_log_status = v4l2_ctrl_log_status, .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, .vidioc_unsubscribe_event = v4l2_event_unsubscribe, @@ -441,8 +553,9 @@ int radio_tea5777_init(struct radio_tea5777 *tea, struct module *owner) (1LL << TEA5777_W_IFW_SHIFT) | (1LL << TEA5777_W_INTEXT_SHIFT) | (1LL << TEA5777_W_CHP0_SHIFT) | - (2LL << TEA5777_W_SLEV_SHIFT); + (1LL << TEA5777_W_SLEV_SHIFT); tea->freq = 90500 * 16; /* 90.5Mhz default */ + tea->audmode = V4L2_TUNER_MODE_STEREO; res = radio_tea5777_set_freq(tea); if (res) { v4l2_err(tea->v4l2_dev, "can't set initial freq (%d)\n", res); diff --git a/drivers/media/radio/radio-tea5777.h b/drivers/media/radio/radio-tea5777.h index 55cbd78df5eda8d144687c3d356a0218c9262d30..4ea43a90a151ed10604c57b01de530f5848cbbce 100644 --- a/drivers/media/radio/radio-tea5777.h +++ b/drivers/media/radio/radio-tea5777.h @@ -68,7 +68,9 @@ struct radio_tea5777 { bool has_am; /* Device can tune to AM freqs */ bool write_before_read; /* must write before read quirk */ bool needs_write; /* for write before read quirk */ + u32 band; /* current band */ u32 freq; /* current frequency */ + u32 audmode; /* last set audmode */ u32 seek_rangelow; /* current hwseek limits */ u32 seek_rangehigh; u32 read_reg; @@ -83,5 +85,6 @@ struct radio_tea5777 { int radio_tea5777_init(struct radio_tea5777 *tea, struct module *owner); void radio_tea5777_exit(struct radio_tea5777 *tea); +int radio_tea5777_set_freq(struct radio_tea5777 *tea); #endif /* __RADIO_TEA5777_H */ diff --git a/drivers/media/radio/radio-timb.c b/drivers/media/radio/radio-timb.c index 7052adc0c0b0547a09f68534059912d769938482..5cf07779f4bb2b1ccddad9756f772184e036bed3 100644 --- a/drivers/media/radio/radio-timb.c +++ b/drivers/media/radio/radio-timb.c @@ -85,7 +85,7 @@ static int timbradio_vidioc_g_audio(struct file *file, void *priv, } static int timbradio_vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) + const struct v4l2_audio *a) { return a->index ? -EINVAL : 0; } @@ -157,7 +157,7 @@ static int __devinit timbradio_probe(struct platform_device *pdev) goto err; } - tr = kzalloc(sizeof(*tr), GFP_KERNEL); + tr = devm_kzalloc(&pdev->dev, sizeof(*tr), GFP_KERNEL); if (!tr) { err = -ENOMEM; goto err; @@ -177,7 +177,7 @@ static int __devinit timbradio_probe(struct platform_device *pdev) strlcpy(tr->v4l2_dev.name, DRIVER_NAME, sizeof(tr->v4l2_dev.name)); err = v4l2_device_register(NULL, &tr->v4l2_dev); if (err) - goto err_v4l2_dev; + goto err; tr->video_dev.v4l2_dev = &tr->v4l2_dev; @@ -195,8 +195,6 @@ static int __devinit timbradio_probe(struct platform_device *pdev) err_video_req: video_device_release_empty(&tr->video_dev); v4l2_device_unregister(&tr->v4l2_dev); -err_v4l2_dev: - kfree(tr); err: dev_err(&pdev->dev, "Failed to register: %d\n", err); @@ -212,8 +210,6 @@ static int __devexit timbradio_remove(struct platform_device *pdev) v4l2_device_unregister(&tr->v4l2_dev); - kfree(tr); - return 0; } diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c index e8428f573ccdf0a5649a9b04e187187117f33448..9b0c9fa0beb80307ac0a4b95785a2aaaa50fb0f3 100644 --- a/drivers/media/radio/radio-wl1273.c +++ b/drivers/media/radio/radio-wl1273.c @@ -1479,7 +1479,7 @@ static int wl1273_fm_vidioc_g_audio(struct file *file, void *priv, } static int wl1273_fm_vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *audio) + const struct v4l2_audio *audio) { struct wl1273_device *radio = video_get_drvdata(video_devdata(file)); @@ -1682,7 +1682,7 @@ static int wl1273_fm_vidioc_s_frequency(struct file *file, void *priv, #define WL1273_DEFAULT_SEEK_LEVEL 7 static int wl1273_fm_vidioc_s_hw_freq_seek(struct file *file, void *priv, - struct v4l2_hw_freq_seek *seek) + const struct v4l2_hw_freq_seek *seek) { struct wl1273_device *radio = video_get_drvdata(video_devdata(file)); struct wl1273_core *core = radio->core; @@ -1693,6 +1693,9 @@ static int wl1273_fm_vidioc_s_hw_freq_seek(struct file *file, void *priv, if (seek->tuner != 0 || seek->type != V4L2_TUNER_RADIO) return -EINVAL; + if (file->f_flags & O_NONBLOCK) + return -EWOULDBLOCK; + if (mutex_lock_interruptible(&core->lock)) return -EINTR; @@ -1715,7 +1718,7 @@ static int wl1273_fm_vidioc_s_hw_freq_seek(struct file *file, void *priv, } static int wl1273_fm_vidioc_s_modulator(struct file *file, void *priv, - struct v4l2_modulator *modulator) + const struct v4l2_modulator *modulator) { struct wl1273_device *radio = video_get_drvdata(video_devdata(file)); struct wl1273_core *core = radio->core; @@ -1983,9 +1986,6 @@ static int wl1273_fm_radio_remove(struct platform_device *pdev) v4l2_ctrl_handler_free(&radio->ctrl_handler); video_unregister_device(&radio->videodev); v4l2_device_unregister(&radio->v4l2dev); - kfree(radio->buffer); - kfree(radio->write_buf); - kfree(radio); return 0; } @@ -2005,7 +2005,7 @@ static int __devinit wl1273_fm_radio_probe(struct platform_device *pdev) goto pdata_err; } - radio = kzalloc(sizeof(*radio), GFP_KERNEL); + radio = devm_kzalloc(&pdev->dev, sizeof(*radio), GFP_KERNEL); if (!radio) { r = -ENOMEM; goto pdata_err; @@ -2013,11 +2013,11 @@ static int __devinit wl1273_fm_radio_probe(struct platform_device *pdev) /* RDS buffer allocation */ radio->buf_size = rds_buf * RDS_BLOCK_SIZE; - radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL); + radio->buffer = devm_kzalloc(&pdev->dev, radio->buf_size, GFP_KERNEL); if (!radio->buffer) { pr_err("Cannot allocate memory for RDS buffer.\n"); r = -ENOMEM; - goto err_kmalloc; + goto pdata_err; } radio->core = *core; @@ -2043,7 +2043,7 @@ static int __devinit wl1273_fm_radio_probe(struct platform_device *pdev) if (r) { dev_err(radio->dev, WL1273_FM_DRIVER_NAME ": Cannot get platform data\n"); - goto err_resources; + goto pdata_err; } dev_dbg(radio->dev, "irq: %d\n", radio->core->client->irq); @@ -2061,13 +2061,13 @@ static int __devinit wl1273_fm_radio_probe(struct platform_device *pdev) dev_err(radio->dev, WL1273_FM_DRIVER_NAME ": Core WL1273 IRQ" " not configured"); r = -EINVAL; - goto err_resources; + goto pdata_err; } init_completion(&radio->busy); init_waitqueue_head(&radio->read_queue); - radio->write_buf = kmalloc(256, GFP_KERNEL); + radio->write_buf = devm_kzalloc(&pdev->dev, 256, GFP_KERNEL); if (!radio->write_buf) { r = -ENOMEM; goto write_buf_err; @@ -2080,7 +2080,7 @@ static int __devinit wl1273_fm_radio_probe(struct platform_device *pdev) r = v4l2_device_register(&pdev->dev, &radio->v4l2dev); if (r) { dev_err(&pdev->dev, "Cannot register v4l2_device.\n"); - goto device_register_err; + goto write_buf_err; } /* V4L2 configuration */ @@ -2135,16 +2135,10 @@ static int __devinit wl1273_fm_radio_probe(struct platform_device *pdev) handler_init_err: v4l2_ctrl_handler_free(&radio->ctrl_handler); v4l2_device_unregister(&radio->v4l2dev); -device_register_err: - kfree(radio->write_buf); write_buf_err: free_irq(radio->core->client->irq, radio); err_request_irq: radio->core->pdata->free_resources(); -err_resources: - kfree(radio->buffer); -err_kmalloc: - kfree(radio); pdata_err: return r; } diff --git a/drivers/media/radio/saa7706h.c b/drivers/media/radio/saa7706h.c index bb953ef75f615dd831ecca6204f9aad36bc18a12..54db36ccb9ee2bb23d3e9615fe7c5b8a7e0967ef 100644 --- a/drivers/media/radio/saa7706h.c +++ b/drivers/media/radio/saa7706h.c @@ -199,8 +199,19 @@ static int saa7706h_get_reg16(struct v4l2_subdev *sd, u16 reg) u8 buf[2]; int err; u8 regaddr[] = {reg >> 8, reg}; - struct i2c_msg msg[] = { {client->addr, 0, sizeof(regaddr), regaddr}, - {client->addr, I2C_M_RD, sizeof(buf), buf} }; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .len = sizeof(regaddr), + .buf = regaddr + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = sizeof(buf), + .buf = buf + } + }; err = saa7706h_i2c_transfer(client, msg, ARRAY_SIZE(msg)); if (err) diff --git a/drivers/media/radio/si470x/radio-si470x-common.c b/drivers/media/radio/si470x/radio-si470x-common.c index 9bb65e170d99bd87455107083379931c6bda40a6..18989388ddc14d32f3134f650615c33e43bb55bb 100644 --- a/drivers/media/radio/si470x/radio-si470x-common.c +++ b/drivers/media/radio/si470x/radio-si470x-common.c @@ -296,7 +296,7 @@ int si470x_set_freq(struct si470x_device *radio, unsigned int freq) * si470x_set_seek - set seek */ static int si470x_set_seek(struct si470x_device *radio, - struct v4l2_hw_freq_seek *seek) + const struct v4l2_hw_freq_seek *seek) { int band, retval; unsigned int freq; @@ -701,13 +701,16 @@ static int si470x_vidioc_s_frequency(struct file *file, void *priv, * si470x_vidioc_s_hw_freq_seek - set hardware frequency seek */ static int si470x_vidioc_s_hw_freq_seek(struct file *file, void *priv, - struct v4l2_hw_freq_seek *seek) + const struct v4l2_hw_freq_seek *seek) { struct si470x_device *radio = video_drvdata(file); if (seek->tuner != 0) return -EINVAL; + if (file->f_flags & O_NONBLOCK) + return -EWOULDBLOCK; + return si470x_set_seek(radio, seek); } diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c index f867f04cccc99626bb7fc5dee97d34f2adaed9fa..e5024cfd27a713ffa77403471275b62e6ba264e3 100644 --- a/drivers/media/radio/si470x/radio-si470x-i2c.c +++ b/drivers/media/radio/si470x/radio-si470x-i2c.c @@ -98,8 +98,12 @@ int si470x_get_register(struct si470x_device *radio, int regnr) { u16 buf[READ_REG_NUM]; struct i2c_msg msgs[1] = { - { radio->client->addr, I2C_M_RD, sizeof(u16) * READ_REG_NUM, - (void *)buf }, + { + .addr = radio->client->addr, + .flags = I2C_M_RD, + .len = sizeof(u16) * READ_REG_NUM, + .buf = (void *)buf + }, }; if (i2c_transfer(radio->client->adapter, msgs, 1) != 1) @@ -119,8 +123,11 @@ int si470x_set_register(struct si470x_device *radio, int regnr) int i; u16 buf[WRITE_REG_NUM]; struct i2c_msg msgs[1] = { - { radio->client->addr, 0, sizeof(u16) * WRITE_REG_NUM, - (void *)buf }, + { + .addr = radio->client->addr, + .len = sizeof(u16) * WRITE_REG_NUM, + .buf = (void *)buf + }, }; for (i = 0; i < WRITE_REG_NUM; i++) @@ -146,8 +153,12 @@ static int si470x_get_all_registers(struct si470x_device *radio) int i; u16 buf[READ_REG_NUM]; struct i2c_msg msgs[1] = { - { radio->client->addr, I2C_M_RD, sizeof(u16) * READ_REG_NUM, - (void *)buf }, + { + .addr = radio->client->addr, + .flags = I2C_M_RD, + .len = sizeof(u16) * READ_REG_NUM, + .buf = (void *)buf + }, }; if (i2c_transfer(radio->client->adapter, msgs, 1) != 1) diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c index b898c8925ab778603ddb4f7f5177379d20fc109b..a9e6d17015ef545cc11aa3fc4562acd403a41683 100644 --- a/drivers/media/radio/si4713-i2c.c +++ b/drivers/media/radio/si4713-i2c.c @@ -1213,7 +1213,7 @@ static int si4713_write_econtrol_integers(struct si4713_device *sdev, } static int si4713_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f); -static int si4713_s_modulator(struct v4l2_subdev *sd, struct v4l2_modulator *); +static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *); /* * si4713_setup - Sets the device up with current configuration. * @sdev: si4713_device structure for the device we are communicating @@ -1873,7 +1873,7 @@ static int si4713_g_modulator(struct v4l2_subdev *sd, struct v4l2_modulator *vm) } /* si4713_s_modulator - set modulator attributes */ -static int si4713_s_modulator(struct v4l2_subdev *sd, struct v4l2_modulator *vm) +static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *vm) { struct si4713_device *sdev = to_si4713_device(sd); int rval = 0; diff --git a/drivers/media/radio/wl128x/fmdrv_v4l2.c b/drivers/media/radio/wl128x/fmdrv_v4l2.c index 49a11ec1f44967fe99bce27b3a602ed320e41170..048de45360360251095639d1422f9931853d3fba 100644 --- a/drivers/media/radio/wl128x/fmdrv_v4l2.c +++ b/drivers/media/radio/wl128x/fmdrv_v4l2.c @@ -56,23 +56,29 @@ static ssize_t fm_v4l2_fops_read(struct file *file, char __user * buf, return -EIO; } - /* Turn on RDS mode , if it is disabled */ + if (mutex_lock_interruptible(&fmdev->mutex)) + return -ERESTARTSYS; + + /* Turn on RDS mode if it is disabled */ ret = fm_rx_get_rds_mode(fmdev, &rds_mode); if (ret < 0) { fmerr("Unable to read current rds mode\n"); - return ret; + goto read_unlock; } if (rds_mode == FM_RDS_DISABLE) { ret = fmc_set_rds_mode(fmdev, FM_RDS_ENABLE); if (ret < 0) { fmerr("Failed to enable rds mode\n"); - return ret; + goto read_unlock; } } /* Copy RDS data from internal buffer to user buffer */ - return fmc_transfer_rds_from_internal_buff(fmdev, file, buf, count); + ret = fmc_transfer_rds_from_internal_buff(fmdev, file, buf, count); +read_unlock: + mutex_unlock(&fmdev->mutex); + return ret; } /* Write TX RDS data */ @@ -91,8 +97,11 @@ static ssize_t fm_v4l2_fops_write(struct file *file, const char __user * buf, return -EFAULT; fmdev = video_drvdata(file); + if (mutex_lock_interruptible(&fmdev->mutex)) + return -ERESTARTSYS; fm_tx_set_radio_text(fmdev, rds.text, rds.text_type); fm_tx_set_af(fmdev, rds.af_freq); + mutex_unlock(&fmdev->mutex); return sizeof(rds); } @@ -103,7 +112,9 @@ static u32 fm_v4l2_fops_poll(struct file *file, struct poll_table_struct *pts) struct fmdev *fmdev; fmdev = video_drvdata(file); + mutex_lock(&fmdev->mutex); ret = fmc_is_rds_data_available(fmdev, file, pts); + mutex_unlock(&fmdev->mutex); if (ret < 0) return POLLIN | POLLRDNORM; @@ -127,10 +138,12 @@ static int fm_v4l2_fops_open(struct file *file) fmdev = video_drvdata(file); + if (mutex_lock_interruptible(&fmdev->mutex)) + return -ERESTARTSYS; ret = fmc_prepare(fmdev); if (ret < 0) { fmerr("Unable to prepare FM CORE\n"); - return ret; + goto open_unlock; } fmdbg("Load FM RX firmware..\n"); @@ -138,10 +151,12 @@ static int fm_v4l2_fops_open(struct file *file) ret = fmc_set_mode(fmdev, FM_MODE_RX); if (ret < 0) { fmerr("Unable to load FM RX firmware\n"); - return ret; + goto open_unlock; } radio_disconnected = 1; +open_unlock: + mutex_unlock(&fmdev->mutex); return ret; } @@ -156,19 +171,22 @@ static int fm_v4l2_fops_release(struct file *file) return 0; } + mutex_lock(&fmdev->mutex); ret = fmc_set_mode(fmdev, FM_MODE_OFF); if (ret < 0) { fmerr("Unable to turn off the chip\n"); - return ret; + goto release_unlock; } ret = fmc_release(fmdev); if (ret < 0) { fmerr("FM CORE release failed\n"); - return ret; + goto release_unlock; } radio_disconnected = 0; +release_unlock: + mutex_unlock(&fmdev->mutex); return ret; } @@ -240,7 +258,7 @@ static int fm_v4l2_vidioc_g_audio(struct file *file, void *priv, } static int fm_v4l2_vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *audio) + const struct v4l2_audio *audio) { if (audio->index != 0) return -EINVAL; @@ -385,11 +403,14 @@ static int fm_v4l2_vidioc_s_freq(struct file *file, void *priv, /* Set hardware frequency seek. If current mode is NOT RX, set it RX. */ static int fm_v4l2_vidioc_s_hw_freq_seek(struct file *file, void *priv, - struct v4l2_hw_freq_seek *seek) + const struct v4l2_hw_freq_seek *seek) { struct fmdev *fmdev = video_drvdata(file); int ret; + if (file->f_flags & O_NONBLOCK) + return -EWOULDBLOCK; + if (fmdev->curr_fmmode != FM_MODE_RX) { ret = fmc_set_mode(fmdev, FM_MODE_RX); if (ret != 0) { @@ -430,7 +451,7 @@ static int fm_v4l2_vidioc_g_modulator(struct file *file, void *priv, /* Set modulator attributes. If mode is not TX, set to TX. */ static int fm_v4l2_vidioc_s_modulator(struct file *file, void *priv, - struct v4l2_modulator *mod) + const struct v4l2_modulator *mod) { struct fmdev *fmdev = video_drvdata(file); u8 rds_mode; @@ -520,10 +541,6 @@ int fm_v4l2_init_video_device(struct fmdev *fmdev, int radio_nr) video_set_drvdata(gradio_dev, fmdev); gradio_dev->lock = &fmdev->mutex; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &gradio_dev->flags); /* Register with V4L2 subsystem as RADIO device */ if (video_register_device(gradio_dev, VFL_TYPE_RADIO, radio_nr)) { diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 8be57634ba60f23e09fc5840a6bb6837920549e2..79ba242fe263a71e4c1590acad673f7c5f00d74f 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -265,12 +265,40 @@ config IR_IGUANA depends on RC_CORE select USB ---help--- - Say Y here if you want to use the IgaunaWorks USB IR Transceiver. - Both infrared receive and send are supported. + Say Y here if you want to use the IguanaWorks USB IR Transceiver. + Both infrared receive and send are supported. If you want to + change the ID or the pin config, use the user space driver from + IguanaWorks. + + Only firmware 0x0205 and later is supported. To compile this driver as a module, choose M here: the module will be called iguanair. +config IR_TTUSBIR + tristate "TechnoTrend USB IR Receiver" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + select NEW_LEDS + select LEDS_CLASS + ---help--- + Say Y here if you want to use the TechnoTrend USB IR Receiver. The + driver can control the led. + + To compile this driver as a module, choose M here: the module will + be called ttusbir. + +config IR_RX51 + tristate "Nokia N900 IR transmitter diode" + depends on OMAP_DM_TIMER && LIRC + ---help--- + Say Y or M here if you want to enable support for the IR + transmitter diode built in the Nokia N900 (RX51) device. + + The driver uses omap DM timers for generating the carrier + wave and pulses. + config RC_LOOPBACK tristate "Remote Control Loopback Driver" depends on RC_CORE diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index f871d1986c21901011477f61f60374d032c28c14..56bacf07b3618f37db4cbe5ea39735ec9d6065b6 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -23,8 +23,10 @@ obj-$(CONFIG_IR_FINTEK) += fintek-cir.o obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o obj-$(CONFIG_IR_ENE) += ene_ir.o obj-$(CONFIG_IR_REDRAT3) += redrat3.o +obj-$(CONFIG_IR_RX51) += ir-rx51.o obj-$(CONFIG_IR_STREAMZAP) += streamzap.o obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o obj-$(CONFIG_IR_IGUANA) += iguanair.o +obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c index 8fa72e2dacb1cf709abded7d041fd35d0e2f456e..49bb356ed14cabb56a2af7c5b9df9dfcb3cd1674 100644 --- a/drivers/media/rc/ati_remote.c +++ b/drivers/media/rc/ati_remote.c @@ -331,13 +331,9 @@ static void ati_remote_dump(struct device *dev, unsigned char *data, if (data[0] != (unsigned char)0xff && data[0] != 0x00) dev_warn(dev, "Weird byte 0x%02x\n", data[0]); } else if (len == 4) - dev_warn(dev, "Weird key %02x %02x %02x %02x\n", - data[0], data[1], data[2], data[3]); + dev_warn(dev, "Weird key %*ph\n", 4, data); else - dev_warn(dev, - "Weird data, len=%d %02x %02x %02x %02x %02x %02x ...\n", - len, data[0], data[1], data[2], data[3], data[4], - data[5]); + dev_warn(dev, "Weird data, len=%d %*ph ...\n", len, 6, data); } /* @@ -519,8 +515,7 @@ static void ati_remote_input_report(struct urb *urb) if (data[1] != ((data[2] + data[3] + 0xd5) & 0xff)) { dbginfo(&ati_remote->interface->dev, - "wrong checksum in input: %02x %02x %02x %02x\n", - data[0], data[1], data[2], data[3]); + "wrong checksum in input: %*ph\n", 4, data); return; } @@ -942,8 +937,10 @@ static int ati_remote_probe(struct usb_interface *interface, /* Set up and register mouse input device */ if (mouse) { input_dev = input_allocate_device(); - if (!input_dev) + if (!input_dev) { + err = -ENOMEM; goto fail4; + } ati_remote->idev = input_dev; ati_remote_input_init(ati_remote); diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c index ab30c64f812491d186e3a088bea23cc6849651a2..52fd7696b1ba8c7e5bccc9321fd8bd7f4a8fd105 100644 --- a/drivers/media/rc/fintek-cir.c +++ b/drivers/media/rc/fintek-cir.c @@ -295,6 +295,7 @@ static void fintek_process_rx_ir_data(struct fintek_dev *fintek) { DEFINE_IR_RAW_EVENT(rawir); u8 sample; + bool event = false; int i; for (i = 0; i < fintek->pkts; i++) { @@ -332,7 +333,9 @@ static void fintek_process_rx_ir_data(struct fintek_dev *fintek) fit_dbg("Storing %s with duration %d", rawir.pulse ? "pulse" : "space", rawir.duration); - ir_raw_event_store_with_filter(fintek->rdev, &rawir); + if (ir_raw_event_store_with_filter(fintek->rdev, + &rawir)) + event = true; break; } @@ -342,8 +345,10 @@ static void fintek_process_rx_ir_data(struct fintek_dev *fintek) fintek->pkts = 0; - fit_dbg("Calling ir_raw_event_handle"); - ir_raw_event_handle(fintek->rdev); + if (event) { + fit_dbg("Calling ir_raw_event_handle"); + ir_raw_event_handle(fintek->rdev); + } } /* copy data from hardware rx register into driver buffer */ diff --git a/drivers/media/rc/iguanair.c b/drivers/media/rc/iguanair.c index 5e2eaf8ba73ecb0c85556bc022669f8641a25a62..1e4c68a5cecfedfa24c2053dd1b67db88f83e5a3 100644 --- a/drivers/media/rc/iguanair.c +++ b/drivers/media/rc/iguanair.c @@ -35,9 +35,9 @@ struct iguanair { struct device *dev; struct usb_device *udev; - int pipe_in, pipe_out; + int pipe_out; + uint16_t version; uint8_t bufsize; - uint8_t version[2]; struct mutex lock; @@ -75,6 +75,7 @@ struct iguanair { #define MAX_PACKET_SIZE 8u #define TIMEOUT 1000 +#define RX_RESOLUTION 21333 struct packet { uint16_t start; @@ -82,11 +83,6 @@ struct packet { uint8_t cmd; }; -struct response_packet { - struct packet header; - uint8_t data[4]; -}; - struct send_packet { struct packet header; uint8_t length; @@ -100,6 +96,25 @@ static void process_ir_data(struct iguanair *ir, unsigned len) { if (len >= 4 && ir->buf_in[0] == 0 && ir->buf_in[1] == 0) { switch (ir->buf_in[3]) { + case CMD_GET_VERSION: + if (len == 6) { + ir->version = (ir->buf_in[5] << 8) | + ir->buf_in[4]; + complete(&ir->completion); + } + break; + case CMD_GET_BUFSIZE: + if (len >= 5) { + ir->bufsize = ir->buf_in[4]; + complete(&ir->completion); + } + break; + case CMD_GET_FEATURES: + if (len > 5) { + ir->cycle_overhead = ir->buf_in[5]; + complete(&ir->completion); + } + break; case CMD_TX_OVERFLOW: ir->tx_overflow = true; case CMD_RECEIVER_OFF: @@ -109,6 +124,7 @@ static void process_ir_data(struct iguanair *ir, unsigned len) break; case CMD_RX_OVERFLOW: dev_warn(ir->dev, "receive overflow\n"); + ir_raw_event_reset(ir->rc); break; default: dev_warn(ir->dev, "control code %02x received\n", @@ -118,6 +134,7 @@ static void process_ir_data(struct iguanair *ir, unsigned len) } else if (len >= 7) { DEFINE_IR_RAW_EVENT(rawir); unsigned i; + bool event = false; init_ir_raw_event(&rawir); @@ -128,19 +145,22 @@ static void process_ir_data(struct iguanair *ir, unsigned len) } else { rawir.pulse = (ir->buf_in[i] & 0x80) == 0; rawir.duration = ((ir->buf_in[i] & 0x7f) + 1) * - 21330; + RX_RESOLUTION; } - ir_raw_event_store_with_filter(ir->rc, &rawir); + if (ir_raw_event_store_with_filter(ir->rc, &rawir)) + event = true; } - ir_raw_event_handle(ir->rc); + if (event) + ir_raw_event_handle(ir->rc); } } static void iguanair_rx(struct urb *urb) { struct iguanair *ir; + int rc; if (!urb) return; @@ -166,34 +186,27 @@ static void iguanair_rx(struct urb *urb) break; } - usb_submit_urb(urb, GFP_ATOMIC); + rc = usb_submit_urb(urb, GFP_ATOMIC); + if (rc && rc != -ENODEV) + dev_warn(ir->dev, "failed to resubmit urb: %d\n", rc); } -static int iguanair_send(struct iguanair *ir, void *data, unsigned size, - struct response_packet *response, unsigned *res_len) +static int iguanair_send(struct iguanair *ir, void *data, unsigned size) { - unsigned offset, len; int rc, transferred; - for (offset = 0; offset < size; offset += MAX_PACKET_SIZE) { - len = min(size - offset, MAX_PACKET_SIZE); - - if (ir->tx_overflow) - return -EOVERFLOW; + INIT_COMPLETION(ir->completion); - rc = usb_interrupt_msg(ir->udev, ir->pipe_out, data + offset, - len, &transferred, TIMEOUT); - if (rc) - return rc; + rc = usb_interrupt_msg(ir->udev, ir->pipe_out, data, size, + &transferred, TIMEOUT); + if (rc) + return rc; - if (transferred != len) - return -EIO; - } + if (transferred != size) + return -EIO; - if (response) { - rc = usb_interrupt_msg(ir->udev, ir->pipe_in, response, - sizeof(*response), res_len, TIMEOUT); - } + if (wait_for_completion_timeout(&ir->completion, TIMEOUT) == 0) + return -ETIMEDOUT; return rc; } @@ -201,66 +214,43 @@ static int iguanair_send(struct iguanair *ir, void *data, unsigned size, static int iguanair_get_features(struct iguanair *ir) { struct packet packet; - struct response_packet response; - int rc, len; + int rc; packet.start = 0; packet.direction = DIR_OUT; packet.cmd = CMD_GET_VERSION; - rc = iguanair_send(ir, &packet, sizeof(packet), &response, &len); + rc = iguanair_send(ir, &packet, sizeof(packet)); if (rc) { dev_info(ir->dev, "failed to get version\n"); goto out; } - if (len != 6) { - dev_info(ir->dev, "failed to get version\n"); - rc = -EIO; + if (ir->version < 0x205) { + dev_err(ir->dev, "firmware 0x%04x is too old\n", ir->version); + rc = -ENODEV; goto out; } - ir->version[0] = response.data[0]; - ir->version[1] = response.data[1]; ir->bufsize = 150; ir->cycle_overhead = 65; packet.cmd = CMD_GET_BUFSIZE; - rc = iguanair_send(ir, &packet, sizeof(packet), &response, &len); + rc = iguanair_send(ir, &packet, sizeof(packet)); if (rc) { dev_info(ir->dev, "failed to get buffer size\n"); goto out; } - if (len != 5) { - dev_info(ir->dev, "failed to get buffer size\n"); - rc = -EIO; - goto out; - } - - ir->bufsize = response.data[0]; - - if (ir->version[0] == 0 || ir->version[1] == 0) - goto out; - packet.cmd = CMD_GET_FEATURES; - rc = iguanair_send(ir, &packet, sizeof(packet), &response, &len); + rc = iguanair_send(ir, &packet, sizeof(packet)); if (rc) { dev_info(ir->dev, "failed to get features\n"); goto out; } - if (len < 5) { - dev_info(ir->dev, "failed to get features\n"); - rc = -EIO; - goto out; - } - - if (len > 5 && ir->version[0] >= 4) - ir->cycle_overhead = response.data[1]; - out: return rc; } @@ -269,17 +259,11 @@ static int iguanair_receiver(struct iguanair *ir, bool enable) { struct packet packet = { 0, DIR_OUT, enable ? CMD_RECEIVER_ON : CMD_RECEIVER_OFF }; - int rc; - - INIT_COMPLETION(ir->completion); - rc = iguanair_send(ir, &packet, sizeof(packet), NULL, NULL); - if (rc) - return rc; - - wait_for_completion_timeout(&ir->completion, TIMEOUT); + if (enable) + ir_raw_event_reset(ir->rc); - return 0; + return iguanair_send(ir, &packet, sizeof(packet)); } /* @@ -350,26 +334,38 @@ static int iguanair_set_tx_mask(struct rc_dev *dev, uint32_t mask) static int iguanair_tx(struct rc_dev *dev, unsigned *txbuf, unsigned count) { struct iguanair *ir = dev->priv; - uint8_t space, *payload; - unsigned i, size, rc; + uint8_t space; + unsigned i, size, periods, bytes; + int rc; struct send_packet *packet; mutex_lock(&ir->lock); - /* convert from us to carrier periods */ - for (i = size = 0; i < count; i++) { - txbuf[i] = DIV_ROUND_CLOSEST(txbuf[i] * ir->carrier, 1000000); - size += (txbuf[i] + 126) / 127; - } - - packet = kmalloc(sizeof(*packet) + size, GFP_KERNEL); + packet = kmalloc(sizeof(*packet) + ir->bufsize, GFP_KERNEL); if (!packet) { rc = -ENOMEM; goto out; } - if (size > ir->bufsize) { - rc = -E2BIG; + /* convert from us to carrier periods */ + for (i = space = size = 0; i < count; i++) { + periods = DIV_ROUND_CLOSEST(txbuf[i] * ir->carrier, 1000000); + bytes = DIV_ROUND_UP(periods, 127); + if (size + bytes > ir->bufsize) { + count = i; + break; + } + while (periods > 127) { + packet->payload[size++] = 127 | space; + periods -= 127; + } + + packet->payload[size++] = periods | space; + space ^= 0x80; + } + + if (count == 0) { + rc = -EINVAL; goto out; } @@ -381,21 +377,6 @@ static int iguanair_tx(struct rc_dev *dev, unsigned *txbuf, unsigned count) packet->busy7 = ir->busy7; packet->busy4 = ir->busy4; - space = 0; - payload = packet->payload; - - for (i = 0; i < count; i++) { - unsigned periods = txbuf[i]; - - while (periods > 127) { - *payload++ = 127 | space; - periods -= 127; - } - - *payload++ = periods | space; - space ^= 0x80; - } - if (ir->receiver_on) { rc = iguanair_receiver(ir, false); if (rc) { @@ -406,17 +387,10 @@ static int iguanair_tx(struct rc_dev *dev, unsigned *txbuf, unsigned count) ir->tx_overflow = false; - INIT_COMPLETION(ir->completion); + rc = iguanair_send(ir, packet, size + 8); - rc = iguanair_send(ir, packet, size + 8, NULL, NULL); - - if (rc == 0) { - wait_for_completion_timeout(&ir->completion, TIMEOUT); - if (ir->tx_overflow) - rc = -EOVERFLOW; - } - - ir->tx_overflow = false; + if (rc == 0 && ir->tx_overflow) + rc = -EOVERFLOW; if (ir->receiver_on) { if (iguanair_receiver(ir, true)) @@ -424,10 +398,10 @@ static int iguanair_tx(struct rc_dev *dev, unsigned *txbuf, unsigned count) } out: - mutex_unlock(&ir->lock); kfree(packet); + mutex_unlock(&ir->lock); - return rc; + return rc ? rc : count; } static int iguanair_open(struct rc_dev *rdev) @@ -437,8 +411,6 @@ static int iguanair_open(struct rc_dev *rdev) mutex_lock(&ir->lock); - usb_submit_urb(ir->urb_in, GFP_KERNEL); - BUG_ON(ir->receiver_on); rc = iguanair_receiver(ir, true); @@ -459,11 +431,9 @@ static void iguanair_close(struct rc_dev *rdev) rc = iguanair_receiver(ir, false); ir->receiver_on = false; - if (rc) + if (rc && rc != -ENODEV) dev_warn(ir->dev, "failed to disable receiver: %d\n", rc); - usb_kill_urb(ir->urb_in); - mutex_unlock(&ir->lock); } @@ -473,22 +443,22 @@ static int __devinit iguanair_probe(struct usb_interface *intf, struct usb_device *udev = interface_to_usbdev(intf); struct iguanair *ir; struct rc_dev *rc; - int ret; + int ret, pipein; struct usb_host_interface *idesc; ir = kzalloc(sizeof(*ir), GFP_KERNEL); rc = rc_allocate_device(); if (!ir || !rc) { - ret = ENOMEM; + ret = -ENOMEM; goto out; } - ir->buf_in = usb_alloc_coherent(udev, MAX_PACKET_SIZE, GFP_ATOMIC, + ir->buf_in = usb_alloc_coherent(udev, MAX_PACKET_SIZE, GFP_KERNEL, &ir->dma_in); ir->urb_in = usb_alloc_urb(0, GFP_KERNEL); if (!ir->buf_in || !ir->urb_in) { - ret = ENOMEM; + ret = -ENOMEM; goto out; } @@ -502,28 +472,29 @@ static int __devinit iguanair_probe(struct usb_interface *intf, ir->rc = rc; ir->dev = &intf->dev; ir->udev = udev; - ir->pipe_in = usb_rcvintpipe(udev, - idesc->endpoint[0].desc.bEndpointAddress); ir->pipe_out = usb_sndintpipe(udev, idesc->endpoint[1].desc.bEndpointAddress); mutex_init(&ir->lock); init_completion(&ir->completion); - ret = iguanair_get_features(ir); + pipein = usb_rcvintpipe(udev, idesc->endpoint[0].desc.bEndpointAddress); + usb_fill_int_urb(ir->urb_in, udev, pipein, ir->buf_in, MAX_PACKET_SIZE, + iguanair_rx, ir, 1); + ir->urb_in->transfer_dma = ir->dma_in; + ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + ret = usb_submit_urb(ir->urb_in, GFP_KERNEL); if (ret) { - dev_warn(&intf->dev, "failed to get device features"); + dev_warn(&intf->dev, "failed to submit urb: %d\n", ret); goto out; } - usb_fill_int_urb(ir->urb_in, ir->udev, ir->pipe_in, ir->buf_in, - MAX_PACKET_SIZE, iguanair_rx, ir, - idesc->endpoint[0].desc.bInterval); - ir->urb_in->transfer_dma = ir->dma_in; - ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + ret = iguanair_get_features(ir); + if (ret) + goto out2; snprintf(ir->name, sizeof(ir->name), - "IguanaWorks USB IR Transceiver version %d.%d", - ir->version[0], ir->version[1]); + "IguanaWorks USB IR Transceiver version 0x%04x", ir->version); usb_make_path(ir->udev, ir->phys, sizeof(ir->phys)); @@ -540,21 +511,23 @@ static int __devinit iguanair_probe(struct usb_interface *intf, rc->s_tx_carrier = iguanair_set_tx_carrier; rc->tx_ir = iguanair_tx; rc->driver_name = DRIVER_NAME; - rc->map_name = RC_MAP_EMPTY; + rc->map_name = RC_MAP_RC6_MCE; + rc->timeout = MS_TO_NS(100); + rc->rx_resolution = RX_RESOLUTION; iguanair_set_tx_carrier(rc, 38000); ret = rc_register_device(rc); if (ret < 0) { dev_err(&intf->dev, "failed to register rc device %d", ret); - goto out; + goto out2; } usb_set_intfdata(intf, ir); - dev_info(&intf->dev, "Registered %s", ir->name); - return 0; +out2: + usb_kill_urb(ir->urb_in); out: if (ir) { usb_free_urb(ir->urb_in); @@ -570,12 +543,11 @@ static void __devexit iguanair_disconnect(struct usb_interface *intf) { struct iguanair *ir = usb_get_intfdata(intf); + rc_unregister_device(ir->rc); usb_set_intfdata(intf, NULL); - usb_kill_urb(ir->urb_in); usb_free_urb(ir->urb_in); usb_free_coherent(ir->udev, MAX_PACKET_SIZE, ir->buf_in, ir->dma_in); - rc_unregister_device(ir->rc); kfree(ir); } @@ -592,6 +564,8 @@ static int iguanair_suspend(struct usb_interface *intf, pm_message_t message) dev_warn(ir->dev, "failed to disable receiver for suspend\n"); } + usb_kill_urb(ir->urb_in); + mutex_unlock(&ir->lock); return rc; @@ -604,6 +578,10 @@ static int iguanair_resume(struct usb_interface *intf) mutex_lock(&ir->lock); + rc = usb_submit_urb(ir->urb_in, GFP_KERNEL); + if (rc) + dev_warn(&intf->dev, "failed to submit urb: %d\n", rc); + if (ir->receiver_on) { rc = iguanair_receiver(ir, true); if (rc) @@ -627,7 +605,8 @@ static struct usb_driver iguanair_driver = { .suspend = iguanair_suspend, .resume = iguanair_resume, .reset_resume = iguanair_resume, - .id_table = iguanair_table + .id_table = iguanair_table, + .soft_unbind = 1 /* we want to disable receiver on unbind */ }; module_usb_driver(iguanair_driver); diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c index 5faba2a2fdd3b87621388c5c8f4254129d4db0ff..569124b03de3f8ecfa67321a536e144b628b81cd 100644 --- a/drivers/media/rc/ir-lirc-codec.c +++ b/drivers/media/rc/ir-lirc-codec.c @@ -105,8 +105,14 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf, struct lirc_codec *lirc; struct rc_dev *dev; unsigned int *txbuf; /* buffer with values to transmit */ - ssize_t ret = 0; + ssize_t ret = -EINVAL; size_t count; + ktime_t start; + s64 towait; + unsigned int duration = 0; /* signal duration in us */ + int i; + + start = ktime_get(); lirc = lirc_get_pdata(file); if (!lirc) @@ -129,11 +135,30 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf, goto out; } - if (dev->tx_ir) - ret = dev->tx_ir(dev, txbuf, count); + if (!dev->tx_ir) { + ret = -ENOSYS; + goto out; + } + + ret = dev->tx_ir(dev, txbuf, count); + if (ret < 0) + goto out; + + for (i = 0; i < ret; i++) + duration += txbuf[i]; - if (ret > 0) - ret *= sizeof(unsigned); + ret *= sizeof(unsigned int); + + /* + * The lircd gap calculation expects the write function to + * wait for the actual IR signal to be transmitted before + * returning. + */ + towait = ktime_us_delta(ktime_add_us(start, duration), ktime_get()); + if (towait > 0) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(usecs_to_jiffies(towait)); + } out: kfree(txbuf); diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c index 3c9431a9f62d282d37238ab6089cd63ca73ad77b..2ca509e6e16b6c73cc09b0bc84616b8b1b1beafe 100644 --- a/drivers/media/rc/ir-nec-decoder.c +++ b/drivers/media/rc/ir-nec-decoder.c @@ -70,7 +70,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev) if (!ev.pulse) break; - if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2)) { + if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT * 2)) { data->is_nec_x = false; data->necx_repeat = false; } else if (eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2)) @@ -86,7 +86,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev) if (ev.pulse) break; - if (eq_margin(ev.duration, NEC_HEADER_SPACE, NEC_UNIT / 2)) { + if (eq_margin(ev.duration, NEC_HEADER_SPACE, NEC_UNIT)) { data->state = STATE_BIT_PULSE; return 0; } else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) { diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c index a82025121345bdad0dc1d84f425d640fa7010a30..97dc8d13b06b386ab2b93293f227a7de37769a29 100644 --- a/drivers/media/rc/ir-raw.c +++ b/drivers/media/rc/ir-raw.c @@ -157,7 +157,9 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store_edge); * This routine (which may be called from an interrupt context) works * in similar manner to ir_raw_event_store_edge. * This routine is intended for devices with limited internal buffer - * It automerges samples of same type, and handles timeouts + * It automerges samples of same type, and handles timeouts. Returns non-zero + * if the event was added, and zero if the event was ignored due to idle + * processing. */ int ir_raw_event_store_with_filter(struct rc_dev *dev, struct ir_raw_event *ev) { @@ -184,7 +186,7 @@ int ir_raw_event_store_with_filter(struct rc_dev *dev, struct ir_raw_event *ev) dev->raw->this_ev.duration >= dev->timeout) ir_raw_event_set_idle(dev, true); - return 0; + return 1; } EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter); diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c new file mode 100644 index 0000000000000000000000000000000000000000..546199e9ccc7268f1600a7bc89415b96b10566f2 --- /dev/null +++ b/drivers/media/rc/ir-rx51.c @@ -0,0 +1,498 @@ +/* + * Copyright (C) 2008 Nokia Corporation + * + * Based on lirc_serial.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#define LIRC_RX51_DRIVER_FEATURES (LIRC_CAN_SET_SEND_DUTY_CYCLE | \ + LIRC_CAN_SET_SEND_CARRIER | \ + LIRC_CAN_SEND_PULSE) + +#define DRIVER_NAME "lirc_rx51" + +#define WBUF_LEN 256 + +#define TIMER_MAX_VALUE 0xffffffff + +struct lirc_rx51 { + struct omap_dm_timer *pwm_timer; + struct omap_dm_timer *pulse_timer; + struct device *dev; + struct lirc_rx51_platform_data *pdata; + wait_queue_head_t wqueue; + + unsigned long fclk_khz; + unsigned int freq; /* carrier frequency */ + unsigned int duty_cycle; /* carrier duty cycle */ + unsigned int irq_num; + unsigned int match; + int wbuf[WBUF_LEN]; + int wbuf_index; + unsigned long device_is_open; + int pwm_timer_num; +}; + +static void lirc_rx51_on(struct lirc_rx51 *lirc_rx51) +{ + omap_dm_timer_set_pwm(lirc_rx51->pwm_timer, 0, 1, + OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE); +} + +static void lirc_rx51_off(struct lirc_rx51 *lirc_rx51) +{ + omap_dm_timer_set_pwm(lirc_rx51->pwm_timer, 0, 1, + OMAP_TIMER_TRIGGER_NONE); +} + +static int init_timing_params(struct lirc_rx51 *lirc_rx51) +{ + u32 load, match; + + load = -(lirc_rx51->fclk_khz * 1000 / lirc_rx51->freq); + match = -(lirc_rx51->duty_cycle * -load / 100); + omap_dm_timer_set_load(lirc_rx51->pwm_timer, 1, load); + omap_dm_timer_set_match(lirc_rx51->pwm_timer, 1, match); + omap_dm_timer_write_counter(lirc_rx51->pwm_timer, TIMER_MAX_VALUE - 2); + omap_dm_timer_start(lirc_rx51->pwm_timer); + omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0); + omap_dm_timer_start(lirc_rx51->pulse_timer); + + lirc_rx51->match = 0; + + return 0; +} + +#define tics_after(a, b) ((long)(b) - (long)(a) < 0) + +static int pulse_timer_set_timeout(struct lirc_rx51 *lirc_rx51, int usec) +{ + int counter; + + BUG_ON(usec < 0); + + if (lirc_rx51->match == 0) + counter = omap_dm_timer_read_counter(lirc_rx51->pulse_timer); + else + counter = lirc_rx51->match; + + counter += (u32)(lirc_rx51->fclk_khz * usec / (1000)); + omap_dm_timer_set_match(lirc_rx51->pulse_timer, 1, counter); + omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, + OMAP_TIMER_INT_MATCH); + if (tics_after(omap_dm_timer_read_counter(lirc_rx51->pulse_timer), + counter)) { + return 1; + } + return 0; +} + +static irqreturn_t lirc_rx51_interrupt_handler(int irq, void *ptr) +{ + unsigned int retval; + struct lirc_rx51 *lirc_rx51 = ptr; + + retval = omap_dm_timer_read_status(lirc_rx51->pulse_timer); + if (!retval) + return IRQ_NONE; + + if (retval & ~OMAP_TIMER_INT_MATCH) + dev_err_ratelimited(lirc_rx51->dev, + ": Unexpected interrupt source: %x\n", retval); + + omap_dm_timer_write_status(lirc_rx51->pulse_timer, + OMAP_TIMER_INT_MATCH | + OMAP_TIMER_INT_OVERFLOW | + OMAP_TIMER_INT_CAPTURE); + if (lirc_rx51->wbuf_index < 0) { + dev_err_ratelimited(lirc_rx51->dev, + ": BUG wbuf_index has value of %i\n", + lirc_rx51->wbuf_index); + goto end; + } + + /* + * If we happen to hit an odd latency spike, loop through the + * pulses until we catch up. + */ + do { + if (lirc_rx51->wbuf_index >= WBUF_LEN) + goto end; + if (lirc_rx51->wbuf[lirc_rx51->wbuf_index] == -1) + goto end; + + if (lirc_rx51->wbuf_index % 2) + lirc_rx51_off(lirc_rx51); + else + lirc_rx51_on(lirc_rx51); + + retval = pulse_timer_set_timeout(lirc_rx51, + lirc_rx51->wbuf[lirc_rx51->wbuf_index]); + lirc_rx51->wbuf_index++; + + } while (retval); + + return IRQ_HANDLED; +end: + /* Stop TX here */ + lirc_rx51_off(lirc_rx51); + lirc_rx51->wbuf_index = -1; + omap_dm_timer_stop(lirc_rx51->pwm_timer); + omap_dm_timer_stop(lirc_rx51->pulse_timer); + omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0); + wake_up_interruptible(&lirc_rx51->wqueue); + + return IRQ_HANDLED; +} + +static int lirc_rx51_init_port(struct lirc_rx51 *lirc_rx51) +{ + struct clk *clk_fclk; + int retval, pwm_timer = lirc_rx51->pwm_timer_num; + + lirc_rx51->pwm_timer = omap_dm_timer_request_specific(pwm_timer); + if (lirc_rx51->pwm_timer == NULL) { + dev_err(lirc_rx51->dev, ": Error requesting GPT%d timer\n", + pwm_timer); + return -EBUSY; + } + + lirc_rx51->pulse_timer = omap_dm_timer_request(); + if (lirc_rx51->pulse_timer == NULL) { + dev_err(lirc_rx51->dev, ": Error requesting pulse timer\n"); + retval = -EBUSY; + goto err1; + } + + omap_dm_timer_set_source(lirc_rx51->pwm_timer, OMAP_TIMER_SRC_SYS_CLK); + omap_dm_timer_set_source(lirc_rx51->pulse_timer, + OMAP_TIMER_SRC_SYS_CLK); + + omap_dm_timer_enable(lirc_rx51->pwm_timer); + omap_dm_timer_enable(lirc_rx51->pulse_timer); + + lirc_rx51->irq_num = omap_dm_timer_get_irq(lirc_rx51->pulse_timer); + retval = request_irq(lirc_rx51->irq_num, lirc_rx51_interrupt_handler, + IRQF_DISABLED | IRQF_SHARED, + "lirc_pulse_timer", lirc_rx51); + if (retval) { + dev_err(lirc_rx51->dev, ": Failed to request interrupt line\n"); + goto err2; + } + + clk_fclk = omap_dm_timer_get_fclk(lirc_rx51->pwm_timer); + lirc_rx51->fclk_khz = clk_fclk->rate / 1000; + + return 0; + +err2: + omap_dm_timer_free(lirc_rx51->pulse_timer); +err1: + omap_dm_timer_free(lirc_rx51->pwm_timer); + + return retval; +} + +static int lirc_rx51_free_port(struct lirc_rx51 *lirc_rx51) +{ + omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0); + free_irq(lirc_rx51->irq_num, lirc_rx51); + lirc_rx51_off(lirc_rx51); + omap_dm_timer_disable(lirc_rx51->pwm_timer); + omap_dm_timer_disable(lirc_rx51->pulse_timer); + omap_dm_timer_free(lirc_rx51->pwm_timer); + omap_dm_timer_free(lirc_rx51->pulse_timer); + lirc_rx51->wbuf_index = -1; + + return 0; +} + +static ssize_t lirc_rx51_write(struct file *file, const char *buf, + size_t n, loff_t *ppos) +{ + int count, i; + struct lirc_rx51 *lirc_rx51 = file->private_data; + + if (n % sizeof(int)) + return -EINVAL; + + count = n / sizeof(int); + if ((count > WBUF_LEN) || (count % 2 == 0)) + return -EINVAL; + + /* Wait any pending transfers to finish */ + wait_event_interruptible(lirc_rx51->wqueue, lirc_rx51->wbuf_index < 0); + + if (copy_from_user(lirc_rx51->wbuf, buf, n)) + return -EFAULT; + + /* Sanity check the input pulses */ + for (i = 0; i < count; i++) + if (lirc_rx51->wbuf[i] < 0) + return -EINVAL; + + init_timing_params(lirc_rx51); + if (count < WBUF_LEN) + lirc_rx51->wbuf[count] = -1; /* Insert termination mark */ + + /* + * Adjust latency requirements so the device doesn't go in too + * deep sleep states + */ + lirc_rx51->pdata->set_max_mpu_wakeup_lat(lirc_rx51->dev, 50); + + lirc_rx51_on(lirc_rx51); + lirc_rx51->wbuf_index = 1; + pulse_timer_set_timeout(lirc_rx51, lirc_rx51->wbuf[0]); + + /* + * Don't return back to the userspace until the transfer has + * finished + */ + wait_event_interruptible(lirc_rx51->wqueue, lirc_rx51->wbuf_index < 0); + + /* We can sleep again */ + lirc_rx51->pdata->set_max_mpu_wakeup_lat(lirc_rx51->dev, -1); + + return n; +} + +static long lirc_rx51_ioctl(struct file *filep, + unsigned int cmd, unsigned long arg) +{ + int result; + unsigned long value; + unsigned int ivalue; + struct lirc_rx51 *lirc_rx51 = filep->private_data; + + switch (cmd) { + case LIRC_GET_SEND_MODE: + result = put_user(LIRC_MODE_PULSE, (unsigned long *)arg); + if (result) + return result; + break; + + case LIRC_SET_SEND_MODE: + result = get_user(value, (unsigned long *)arg); + if (result) + return result; + + /* only LIRC_MODE_PULSE supported */ + if (value != LIRC_MODE_PULSE) + return -ENOSYS; + break; + + case LIRC_GET_REC_MODE: + result = put_user(0, (unsigned long *) arg); + if (result) + return result; + break; + + case LIRC_GET_LENGTH: + return -ENOSYS; + break; + + case LIRC_SET_SEND_DUTY_CYCLE: + result = get_user(ivalue, (unsigned int *) arg); + if (result) + return result; + + if (ivalue <= 0 || ivalue > 100) { + dev_err(lirc_rx51->dev, ": invalid duty cycle %d\n", + ivalue); + return -EINVAL; + } + + lirc_rx51->duty_cycle = ivalue; + break; + + case LIRC_SET_SEND_CARRIER: + result = get_user(ivalue, (unsigned int *) arg); + if (result) + return result; + + if (ivalue > 500000 || ivalue < 20000) { + dev_err(lirc_rx51->dev, ": invalid carrier freq %d\n", + ivalue); + return -EINVAL; + } + + lirc_rx51->freq = ivalue; + break; + + case LIRC_GET_FEATURES: + result = put_user(LIRC_RX51_DRIVER_FEATURES, + (unsigned long *) arg); + if (result) + return result; + break; + + default: + return -ENOIOCTLCMD; + } + + return 0; +} + +static int lirc_rx51_open(struct inode *inode, struct file *file) +{ + struct lirc_rx51 *lirc_rx51 = lirc_get_pdata(file); + BUG_ON(!lirc_rx51); + + file->private_data = lirc_rx51; + + if (test_and_set_bit(1, &lirc_rx51->device_is_open)) + return -EBUSY; + + return lirc_rx51_init_port(lirc_rx51); +} + +static int lirc_rx51_release(struct inode *inode, struct file *file) +{ + struct lirc_rx51 *lirc_rx51 = file->private_data; + + lirc_rx51_free_port(lirc_rx51); + + clear_bit(1, &lirc_rx51->device_is_open); + + return 0; +} + +static struct lirc_rx51 lirc_rx51 = { + .freq = 38000, + .duty_cycle = 50, + .wbuf_index = -1, +}; + +static const struct file_operations lirc_fops = { + .owner = THIS_MODULE, + .write = lirc_rx51_write, + .unlocked_ioctl = lirc_rx51_ioctl, + .read = lirc_dev_fop_read, + .poll = lirc_dev_fop_poll, + .open = lirc_rx51_open, + .release = lirc_rx51_release, +}; + +static struct lirc_driver lirc_rx51_driver = { + .name = DRIVER_NAME, + .minor = -1, + .code_length = 1, + .data = &lirc_rx51, + .fops = &lirc_fops, + .owner = THIS_MODULE, +}; + +#ifdef CONFIG_PM + +static int lirc_rx51_suspend(struct platform_device *dev, pm_message_t state) +{ + /* + * In case the device is still open, do not suspend. Normally + * this should not be a problem as lircd only keeps the device + * open only for short periods of time. We also don't want to + * get involved with race conditions that might happen if we + * were in a middle of a transmit. Thus, we defer any suspend + * actions until transmit has completed. + */ + if (test_and_set_bit(1, &lirc_rx51.device_is_open)) + return -EAGAIN; + + clear_bit(1, &lirc_rx51.device_is_open); + + return 0; +} + +static int lirc_rx51_resume(struct platform_device *dev) +{ + return 0; +} + +#else + +#define lirc_rx51_suspend NULL +#define lirc_rx51_resume NULL + +#endif /* CONFIG_PM */ + +static int __devinit lirc_rx51_probe(struct platform_device *dev) +{ + lirc_rx51_driver.features = LIRC_RX51_DRIVER_FEATURES; + lirc_rx51.pdata = dev->dev.platform_data; + lirc_rx51.pwm_timer_num = lirc_rx51.pdata->pwm_timer; + lirc_rx51.dev = &dev->dev; + lirc_rx51_driver.dev = &dev->dev; + lirc_rx51_driver.minor = lirc_register_driver(&lirc_rx51_driver); + init_waitqueue_head(&lirc_rx51.wqueue); + + if (lirc_rx51_driver.minor < 0) { + dev_err(lirc_rx51.dev, ": lirc_register_driver failed: %d\n", + lirc_rx51_driver.minor); + return lirc_rx51_driver.minor; + } + dev_info(lirc_rx51.dev, "registration ok, minor: %d, pwm: %d\n", + lirc_rx51_driver.minor, lirc_rx51.pwm_timer_num); + + return 0; +} + +static int __exit lirc_rx51_remove(struct platform_device *dev) +{ + return lirc_unregister_driver(lirc_rx51_driver.minor); +} + +struct platform_driver lirc_rx51_platform_driver = { + .probe = lirc_rx51_probe, + .remove = __exit_p(lirc_rx51_remove), + .suspend = lirc_rx51_suspend, + .resume = lirc_rx51_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init lirc_rx51_init(void) +{ + return platform_driver_register(&lirc_rx51_platform_driver); +} +module_init(lirc_rx51_init); + +static void __exit lirc_rx51_exit(void) +{ + platform_driver_unregister(&lirc_rx51_platform_driver); +} +module_exit(lirc_rx51_exit); + +MODULE_DESCRIPTION("LIRC TX driver for Nokia RX51"); +MODULE_AUTHOR("Nokia Corporation"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c index 36fe5a349b95d34e0d9a2b427b891647bf7bf6fa..24c77a42fc3645c2297688878396ae992ab9dc6b 100644 --- a/drivers/media/rc/ite-cir.c +++ b/drivers/media/rc/ite-cir.c @@ -1473,6 +1473,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id rdev = rc_allocate_device(); if (!rdev) goto failure; + itdev->rdev = rdev; ret = -ENODEV; @@ -1604,7 +1605,6 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id if (ret) goto failure3; - itdev->rdev = rdev; ite_pr(KERN_NOTICE, "driver has been successfully loaded\n"); return 0; diff --git a/drivers/media/rc/keymaps/rc-tt-1500.c b/drivers/media/rc/keymaps/rc-tt-1500.c index caeff85603e3c71fb4182ae8822aff4734df801f..80217ffc91db39738e2936136444f353e447979e 100644 --- a/drivers/media/rc/keymaps/rc-tt-1500.c +++ b/drivers/media/rc/keymaps/rc-tt-1500.c @@ -61,7 +61,7 @@ static struct rc_map_list tt_1500_map = { .map = { .scan = tt_1500, .size = ARRAY_SIZE(tt_1500), - .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .rc_type = RC_TYPE_RC5, .name = RC_MAP_TT_1500, } }; diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index f38d9a8c6880168a4c6256bdb227218c70123ed9..850547fe711c25131ca84b748b35de2c35b8b5ae 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -627,7 +627,7 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf, break; case MCE_RSP_EQIRCFS: period = DIV_ROUND_CLOSEST( - (1 << data1 * 2) * (data2 + 1), 10); + (1U << data1 * 2) * (data2 + 1), 10); if (!period) break; carrier = (1000 * 1000) / period; @@ -791,10 +791,6 @@ static int mceusb_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count) int i, ret = 0; int cmdcount = 0; unsigned char *cmdbuf; /* MCE command buffer */ - long signal_duration = 0; /* Singnal length in us */ - struct timeval start_time, end_time; - - do_gettimeofday(&start_time); cmdbuf = kzalloc(sizeof(unsigned) * MCE_CMDBUF_SIZE, GFP_KERNEL); if (!cmdbuf) @@ -807,7 +803,6 @@ static int mceusb_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count) /* Generate mce packet data */ for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) { - signal_duration += txbuf[i]; txbuf[i] = txbuf[i] / MCE_TIME_UNIT; do { /* loop to support long pulses/spaces > 127*50us=6.35ms */ @@ -850,19 +845,6 @@ static int mceusb_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count) /* Transmit the command to the mce device */ mce_async_out(ir, cmdbuf, cmdcount); - /* - * The lircd gap calculation expects the write function to - * wait the time it takes for the ircommand to be sent before - * it returns. - */ - do_gettimeofday(&end_time); - signal_duration -= (end_time.tv_usec - start_time.tv_usec) + - (end_time.tv_sec - start_time.tv_sec) * 1000000; - - /* delay with the closest number of ticks */ - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(usecs_to_jiffies(signal_duration)); - out: kfree(cmdbuf); return ret ? ret : count; @@ -974,6 +956,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index) static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) { DEFINE_IR_RAW_EVENT(rawir); + bool event = false; int i = 0; /* skip meaningless 0xb1 0x60 header bytes on orig receiver */ @@ -1004,7 +987,8 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) rawir.pulse ? "pulse" : "space", rawir.duration); - ir_raw_event_store_with_filter(ir->rc, &rawir); + if (ir_raw_event_store_with_filter(ir->rc, &rawir)) + event = true; break; case CMD_DATA: ir->rem--; @@ -1032,8 +1016,10 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) if (ir->parser_state != CMD_HEADER && !ir->rem) ir->parser_state = CMD_HEADER; } - mce_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n"); - ir_raw_event_handle(ir->rc); + if (event) { + mce_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n"); + ir_raw_event_handle(ir->rc); + } } static void mceusb_dev_recv(struct urb *urb) diff --git a/drivers/media/rc/rc-loopback.c b/drivers/media/rc/rc-loopback.c index fae1615e0ff24d6b3d87b660f7c45e55f75a8689..f9be68132c67069e9f30eca7acade491d2770d41 100644 --- a/drivers/media/rc/rc-loopback.c +++ b/drivers/media/rc/rc-loopback.c @@ -105,18 +105,9 @@ static int loop_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count) { struct loopback_dev *lodev = dev->priv; u32 rxmask; - unsigned total_duration = 0; unsigned i; DEFINE_IR_RAW_EVENT(rawir); - for (i = 0; i < count; i++) - total_duration += abs(txbuf[i]); - - if (total_duration == 0) { - dprintk("invalid tx data, total duration zero\n"); - return -EINVAL; - } - if (lodev->txcarrier < lodev->rxcarriermin || lodev->txcarrier > lodev->rxcarriermax) { dprintk("ignoring tx, carrier out of range\n"); @@ -148,9 +139,6 @@ static int loop_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count) ir_raw_event_handle(dev); out: - /* Lirc expects this function to take as long as the total duration */ - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(usecs_to_jiffies(total_duration)); return count; } diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c index 2878b0ed9741b27e497a171dab39e664f271cb27..49731b1a9c57f09a5e9aa43a199e7f5f4e5d766a 100644 --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -1217,9 +1217,10 @@ static int __devinit redrat3_dev_probe(struct usb_interface *intf, rr3->carrier = 38000; rr3->rc = redrat3_init_rc_dev(rr3); - if (!rr3->rc) + if (!rr3->rc) { + retval = -ENOMEM; goto error; - + } setup_timer(&rr3->rx_timeout, redrat3_rx_timeout, (unsigned long)rr3); /* we can register the device now, as it is ready */ diff --git a/drivers/media/rc/ttusbir.c b/drivers/media/rc/ttusbir.c new file mode 100644 index 0000000000000000000000000000000000000000..fef05235234a7b232197429e771522fa5adad882 --- /dev/null +++ b/drivers/media/rc/ttusbir.c @@ -0,0 +1,447 @@ +/* + * TechnoTrend USB IR Receiver + * + * Copyright (C) 2012 Sean Young + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "ttusbir" +#define DRIVER_DESC "TechnoTrend USB IR Receiver" +/* + * The Windows driver uses 8 URBS, the original lirc drivers has a + * configurable amount (2 default, 4 max). This device generates about 125 + * messages per second (!), whether IR is idle or not. + */ +#define NUM_URBS 4 +#define NS_PER_BYTE 62500 +#define NS_PER_BIT (NS_PER_BYTE/8) + +struct ttusbir { + struct rc_dev *rc; + struct device *dev; + struct usb_device *udev; + + struct urb *urb[NUM_URBS]; + + struct led_classdev led; + struct urb *bulk_urb; + uint8_t bulk_buffer[5]; + int bulk_out_endp, iso_in_endp; + bool led_on, is_led_on; + atomic_t led_complete; + + char phys[64]; +}; + +static enum led_brightness ttusbir_brightness_get(struct led_classdev *led_dev) +{ + struct ttusbir *tt = container_of(led_dev, struct ttusbir, led); + + return tt->led_on ? LED_FULL : LED_OFF; +} + +static void ttusbir_set_led(struct ttusbir *tt) +{ + int ret; + + smp_mb(); + + if (tt->led_on != tt->is_led_on && tt->udev && + atomic_add_unless(&tt->led_complete, 1, 1)) { + tt->bulk_buffer[4] = tt->is_led_on = tt->led_on; + ret = usb_submit_urb(tt->bulk_urb, GFP_ATOMIC); + if (ret) { + dev_warn(tt->dev, "failed to submit bulk urb: %d\n", + ret); + atomic_dec(&tt->led_complete); + } + } +} + +static void ttusbir_brightness_set(struct led_classdev *led_dev, enum + led_brightness brightness) +{ + struct ttusbir *tt = container_of(led_dev, struct ttusbir, led); + + tt->led_on = brightness != LED_OFF; + + ttusbir_set_led(tt); +} + +/* + * The urb cannot be reused until the urb completes + */ +static void ttusbir_bulk_complete(struct urb *urb) +{ + struct ttusbir *tt = urb->context; + + atomic_dec(&tt->led_complete); + + switch (urb->status) { + case 0: + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + usb_unlink_urb(urb); + return; + case -EPIPE: + default: + dev_dbg(tt->dev, "Error: urb status = %d\n", urb->status); + break; + } + + ttusbir_set_led(tt); +} + +/* + * The data is one bit per sample, a set bit signifying silence and samples + * being MSB first. Bit 0 can contain garbage so take it to be whatever + * bit 1 is, so we don't have unexpected edges. + */ +static void ttusbir_process_ir_data(struct ttusbir *tt, uint8_t *buf) +{ + struct ir_raw_event rawir; + unsigned i, v, b; + bool event = false; + + init_ir_raw_event(&rawir); + + for (i = 0; i < 128; i++) { + v = buf[i] & 0xfe; + switch (v) { + case 0xfe: + rawir.pulse = false; + rawir.duration = NS_PER_BYTE; + if (ir_raw_event_store_with_filter(tt->rc, &rawir)) + event = true; + break; + case 0: + rawir.pulse = true; + rawir.duration = NS_PER_BYTE; + if (ir_raw_event_store_with_filter(tt->rc, &rawir)) + event = true; + break; + default: + /* one edge per byte */ + if (v & 2) { + b = ffz(v | 1); + rawir.pulse = true; + } else { + b = ffs(v) - 1; + rawir.pulse = false; + } + + rawir.duration = NS_PER_BIT * (8 - b); + if (ir_raw_event_store_with_filter(tt->rc, &rawir)) + event = true; + + rawir.pulse = !rawir.pulse; + rawir.duration = NS_PER_BIT * b; + if (ir_raw_event_store_with_filter(tt->rc, &rawir)) + event = true; + break; + } + } + + /* don't wakeup when there's nothing to do */ + if (event) + ir_raw_event_handle(tt->rc); +} + +static void ttusbir_urb_complete(struct urb *urb) +{ + struct ttusbir *tt = urb->context; + int rc; + + switch (urb->status) { + case 0: + ttusbir_process_ir_data(tt, urb->transfer_buffer); + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + usb_unlink_urb(urb); + return; + case -EPIPE: + default: + dev_dbg(tt->dev, "Error: urb status = %d\n", urb->status); + break; + } + + rc = usb_submit_urb(urb, GFP_ATOMIC); + if (rc && rc != -ENODEV) + dev_warn(tt->dev, "failed to resubmit urb: %d\n", rc); +} + +static int __devinit ttusbir_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct ttusbir *tt; + struct usb_interface_descriptor *idesc; + struct usb_endpoint_descriptor *desc; + struct rc_dev *rc; + int i, j, ret; + int altsetting = -1; + + tt = kzalloc(sizeof(*tt), GFP_KERNEL); + rc = rc_allocate_device(); + if (!tt || !rc) { + ret = -ENOMEM; + goto out; + } + + /* find the correct alt setting */ + for (i = 0; i < intf->num_altsetting && altsetting == -1; i++) { + int bulk_out_endp = -1, iso_in_endp = -1; + + idesc = &intf->altsetting[i].desc; + + for (j = 0; j < idesc->bNumEndpoints; j++) { + desc = &intf->altsetting[i].endpoint[j].desc; + if (usb_endpoint_dir_in(desc) && + usb_endpoint_xfer_isoc(desc) && + desc->wMaxPacketSize == 0x10) + iso_in_endp = j; + else if (usb_endpoint_dir_out(desc) && + usb_endpoint_xfer_bulk(desc) && + desc->wMaxPacketSize == 0x20) + bulk_out_endp = j; + + if (bulk_out_endp != -1 && iso_in_endp != -1) { + tt->bulk_out_endp = bulk_out_endp; + tt->iso_in_endp = iso_in_endp; + altsetting = i; + break; + } + } + } + + if (altsetting == -1) { + dev_err(&intf->dev, "cannot find expected altsetting\n"); + ret = -ENODEV; + goto out; + } + + tt->dev = &intf->dev; + tt->udev = interface_to_usbdev(intf); + tt->rc = rc; + + ret = usb_set_interface(tt->udev, 0, altsetting); + if (ret) + goto out; + + for (i = 0; i < NUM_URBS; i++) { + struct urb *urb = usb_alloc_urb(8, GFP_KERNEL); + void *buffer; + + if (!urb) { + ret = -ENOMEM; + goto out; + } + + urb->dev = tt->udev; + urb->context = tt; + urb->pipe = usb_rcvisocpipe(tt->udev, tt->iso_in_endp); + urb->interval = 1; + buffer = usb_alloc_coherent(tt->udev, 128, GFP_KERNEL, + &urb->transfer_dma); + if (!buffer) { + usb_free_urb(urb); + ret = -ENOMEM; + goto out; + } + urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP | URB_ISO_ASAP; + urb->transfer_buffer = buffer; + urb->complete = ttusbir_urb_complete; + urb->number_of_packets = 8; + urb->transfer_buffer_length = 128; + + for (j = 0; j < 8; j++) { + urb->iso_frame_desc[j].offset = j * 16; + urb->iso_frame_desc[j].length = 16; + } + + tt->urb[i] = urb; + } + + tt->bulk_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!tt->bulk_urb) { + ret = -ENOMEM; + goto out; + } + + tt->bulk_buffer[0] = 0xaa; + tt->bulk_buffer[1] = 0x01; + tt->bulk_buffer[2] = 0x05; + tt->bulk_buffer[3] = 0x01; + + usb_fill_bulk_urb(tt->bulk_urb, tt->udev, usb_sndbulkpipe(tt->udev, + tt->bulk_out_endp), tt->bulk_buffer, sizeof(tt->bulk_buffer), + ttusbir_bulk_complete, tt); + + tt->led.name = "ttusbir:green:power"; + tt->led.brightness_set = ttusbir_brightness_set; + tt->led.brightness_get = ttusbir_brightness_get; + tt->is_led_on = tt->led_on = true; + atomic_set(&tt->led_complete, 0); + ret = led_classdev_register(&intf->dev, &tt->led); + if (ret) + goto out; + + usb_make_path(tt->udev, tt->phys, sizeof(tt->phys)); + + rc->input_name = DRIVER_DESC; + rc->input_phys = tt->phys; + usb_to_input_id(tt->udev, &rc->input_id); + rc->dev.parent = &intf->dev; + rc->driver_type = RC_DRIVER_IR_RAW; + rc->allowed_protos = RC_TYPE_ALL; + rc->priv = tt; + rc->driver_name = DRIVER_NAME; + rc->map_name = RC_MAP_TT_1500; + rc->timeout = MS_TO_NS(100); + /* + * The precision is NS_PER_BIT, but since every 8th bit can be + * overwritten with garbage the accuracy is at best 2 * NS_PER_BIT. + */ + rc->rx_resolution = NS_PER_BIT; + + ret = rc_register_device(rc); + if (ret) { + dev_err(&intf->dev, "failed to register rc device %d\n", ret); + goto out2; + } + + usb_set_intfdata(intf, tt); + + for (i = 0; i < NUM_URBS; i++) { + ret = usb_submit_urb(tt->urb[i], GFP_KERNEL); + if (ret) { + dev_err(tt->dev, "failed to submit urb %d\n", ret); + goto out3; + } + } + + return 0; +out3: + rc_unregister_device(rc); +out2: + led_classdev_unregister(&tt->led); +out: + if (tt) { + for (i = 0; i < NUM_URBS && tt->urb[i]; i++) { + struct urb *urb = tt->urb[i]; + + usb_kill_urb(urb); + usb_free_coherent(tt->udev, 128, urb->transfer_buffer, + urb->transfer_dma); + usb_free_urb(urb); + } + usb_kill_urb(tt->bulk_urb); + usb_free_urb(tt->bulk_urb); + kfree(tt); + } + rc_free_device(rc); + + return ret; +} + +static void __devexit ttusbir_disconnect(struct usb_interface *intf) +{ + struct ttusbir *tt = usb_get_intfdata(intf); + struct usb_device *udev = tt->udev; + int i; + + tt->udev = NULL; + + rc_unregister_device(tt->rc); + led_classdev_unregister(&tt->led); + for (i = 0; i < NUM_URBS; i++) { + usb_kill_urb(tt->urb[i]); + usb_free_coherent(udev, 128, tt->urb[i]->transfer_buffer, + tt->urb[i]->transfer_dma); + usb_free_urb(tt->urb[i]); + } + usb_kill_urb(tt->bulk_urb); + usb_free_urb(tt->bulk_urb); + usb_set_intfdata(intf, NULL); + kfree(tt); +} + +static int ttusbir_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct ttusbir *tt = usb_get_intfdata(intf); + int i; + + for (i = 0; i < NUM_URBS; i++) + usb_kill_urb(tt->urb[i]); + + led_classdev_suspend(&tt->led); + usb_kill_urb(tt->bulk_urb); + + return 0; +} + +static int ttusbir_resume(struct usb_interface *intf) +{ + struct ttusbir *tt = usb_get_intfdata(intf); + int i, rc; + + led_classdev_resume(&tt->led); + tt->is_led_on = true; + ttusbir_set_led(tt); + + for (i = 0; i < NUM_URBS; i++) { + rc = usb_submit_urb(tt->urb[i], GFP_KERNEL); + if (rc) { + dev_warn(tt->dev, "failed to submit urb: %d\n", rc); + break; + } + } + + return rc; +} + +static const struct usb_device_id ttusbir_table[] = { + { USB_DEVICE(0x0b48, 0x2003) }, + { } +}; + +static struct usb_driver ttusbir_driver = { + .name = DRIVER_NAME, + .id_table = ttusbir_table, + .probe = ttusbir_probe, + .suspend = ttusbir_suspend, + .resume = ttusbir_resume, + .reset_resume = ttusbir_resume, + .disconnect = __devexit_p(ttusbir_disconnect) +}; + +module_usb_driver(ttusbir_driver); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Sean Young "); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(usb, ttusbir_table); + diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index 54ee34872d143cea7345f60a5ad9038e91266a51..30ae1f24abc3b536ec6e0735c3a3be9f5f270a74 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -180,7 +180,6 @@ enum wbcir_rxstate { enum wbcir_txstate { WBCIR_TXSTATE_INACTIVE = 0, WBCIR_TXSTATE_ACTIVE, - WBCIR_TXSTATE_DONE, WBCIR_TXSTATE_ERROR }; @@ -216,7 +215,6 @@ struct wbcir_data { u32 txlen; u32 txoff; u32 *txbuf; - wait_queue_head_t txwaitq; u8 txmask; u32 txcarrier; }; @@ -358,7 +356,7 @@ wbcir_irq_rx(struct wbcir_data *data, struct pnp_dev *device) if (data->rxstate == WBCIR_RXSTATE_ERROR) continue; rawir.pulse = irdata & 0x80 ? false : true; - rawir.duration = US_TO_NS((irdata & 0x7F) * 10); + rawir.duration = US_TO_NS(((irdata & 0x7F) + 1) * 10); ir_raw_event_store_with_filter(data->dev, &rawir); } @@ -424,11 +422,11 @@ wbcir_irq_tx(struct wbcir_data *data) if (data->txstate == WBCIR_TXSTATE_ERROR) /* Clear TX underrun bit */ outb(WBCIR_TX_UNDERRUN, data->sbase + WBCIR_REG_SP3_ASCR); - else - data->txstate = WBCIR_TXSTATE_DONE; wbcir_set_irqmask(data, WBCIR_IRQ_RX | WBCIR_IRQ_ERR); led_trigger_event(data->txtrigger, LED_OFF); - wake_up(&data->txwaitq); + kfree(data->txbuf); + data->txbuf = NULL; + data->txstate = WBCIR_TXSTATE_INACTIVE; } else if (data->txoff == data->txlen) { /* At the end of transmission, tell the hw before last byte */ outsb(data->sbase + WBCIR_REG_SP3_TXDATA, bytes, used - 1); @@ -579,43 +577,37 @@ wbcir_txmask(struct rc_dev *dev, u32 mask) } static int -wbcir_tx(struct rc_dev *dev, unsigned *buf, unsigned count) +wbcir_tx(struct rc_dev *dev, unsigned *b, unsigned count) { struct wbcir_data *data = dev->priv; + unsigned *buf; unsigned i; unsigned long flags; + buf = kmalloc(count * sizeof(*b), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* Convert values to multiples of 10us */ + for (i = 0; i < count; i++) + buf[i] = DIV_ROUND_CLOSEST(b[i], 10); + /* Not sure if this is possible, but better safe than sorry */ spin_lock_irqsave(&data->spinlock, flags); if (data->txstate != WBCIR_TXSTATE_INACTIVE) { spin_unlock_irqrestore(&data->spinlock, flags); + kfree(buf); return -EBUSY; } - /* Convert values to multiples of 10us */ - for (i = 0; i < count; i++) - buf[i] = DIV_ROUND_CLOSEST(buf[i], 10); - /* Fill the TX fifo once, the irq handler will do the rest */ data->txbuf = buf; data->txlen = count; data->txoff = 0; wbcir_irq_tx(data); - /* Wait for the TX to complete */ - while (data->txstate == WBCIR_TXSTATE_ACTIVE) { - spin_unlock_irqrestore(&data->spinlock, flags); - wait_event(data->txwaitq, data->txstate != WBCIR_TXSTATE_ACTIVE); - spin_lock_irqsave(&data->spinlock, flags); - } - /* We're done */ - if (data->txstate == WBCIR_TXSTATE_ERROR) - count = -EAGAIN; - data->txstate = WBCIR_TXSTATE_INACTIVE; - data->txbuf = NULL; spin_unlock_irqrestore(&data->spinlock, flags); - return count; } @@ -927,13 +919,11 @@ wbcir_init_hw(struct wbcir_data *data) ir_raw_event_reset(data->dev); ir_raw_event_handle(data->dev); - /* - * Check TX state, if we did a suspend/resume cycle while TX was - * active, we will have a process waiting in txwaitq. - */ + /* Clear TX state */ if (data->txstate == WBCIR_TXSTATE_ACTIVE) { - data->txstate = WBCIR_TXSTATE_ERROR; - wake_up(&data->txwaitq); + kfree(data->txbuf); + data->txbuf = NULL; + data->txstate = WBCIR_TXSTATE_INACTIVE; } /* Enable interrupts */ @@ -974,7 +964,6 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) pnp_set_drvdata(device, data); spin_lock_init(&data->spinlock); - init_waitqueue_head(&data->txwaitq); data->ebase = pnp_port_start(device, 0); data->wbase = pnp_port_start(device, 1); data->sbase = pnp_port_start(device, 2); diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/tuners/Kconfig similarity index 72% rename from drivers/media/common/tuners/Kconfig rename to drivers/media/tuners/Kconfig index 94c6ff7a5da3ad20bf8f10c5bc08b919153e45e5..e8fdf713fce89a5e4a027f633f57136f7c271451 100644 --- a/drivers/media/common/tuners/Kconfig +++ b/drivers/media/tuners/Kconfig @@ -18,43 +18,31 @@ config MEDIA_ATTACH If unsure say Y. +# Analog TV tuners, auto-loaded via tuner.ko config MEDIA_TUNER tristate depends on (MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT) && I2C default y - select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TEA5761 if !MEDIA_TUNER_CUSTOMISE && MEDIA_RADIO_SUPPORT && EXPERIMENTAL - select MEDIA_TUNER_TEA5767 if !MEDIA_TUNER_CUSTOMISE && MEDIA_RADIO_SUPPORT - select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA9887 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE - -config MEDIA_TUNER_CUSTOMISE - bool "Customize analog and hybrid tuner modules to build" - depends on MEDIA_TUNER - default y if EXPERT - help - This allows the user to deselect tuner drivers unnecessary - for their hardware from the build. Use this option with care - as deselecting tuner drivers which are in fact necessary will - result in V4L/DVB devices which cannot be tuned due to lack of - driver support - - If unsure say N. + select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT20XX if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TEA5761 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_RADIO_SUPPORT + select MEDIA_TUNER_TEA5767 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_RADIO_SUPPORT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA9887 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MC44S803 if MEDIA_SUBDRV_AUTOSELECT menu "Customize TV tuners" - visible if MEDIA_TUNER_CUSTOMISE + visible if !MEDIA_SUBDRV_AUTOSELECT depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT config MEDIA_TUNER_SIMPLE tristate "Simple tuner support" depends on MEDIA_SUPPORT && I2C select MEDIA_TUNER_TDA9887 - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y here to include support for various simple tuners. @@ -63,100 +51,99 @@ config MEDIA_TUNER_TDA8290 depends on MEDIA_SUPPORT && I2C select MEDIA_TUNER_TDA827X select MEDIA_TUNER_TDA18271 - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y here to include support for Philips TDA8290+8275(a) tuner. config MEDIA_TUNER_TDA827X tristate "Philips TDA827X silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A DVB-T silicon tuner module. Say Y when you want to support this tuner. config MEDIA_TUNER_TDA18271 tristate "NXP TDA18271 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A silicon tuner module. Say Y when you want to support this tuner. config MEDIA_TUNER_TDA9887 tristate "TDA 9885/6/7 analog IF demodulator" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y here to include support for Philips TDA9885/6/7 analog IF demodulator. config MEDIA_TUNER_TEA5761 - tristate "TEA 5761 radio tuner (EXPERIMENTAL)" + tristate "TEA 5761 radio tuner" depends on MEDIA_SUPPORT && I2C - depends on EXPERIMENTAL - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y here to include support for the Philips TEA5761 radio tuner. config MEDIA_TUNER_TEA5767 tristate "TEA 5767 radio tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y here to include support for the Philips TEA5767 radio tuner. config MEDIA_TUNER_MT20XX tristate "Microtune 2032 / 2050 tuners" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y here to include support for the MT2032 / MT2050 tuner. config MEDIA_TUNER_MT2060 tristate "Microtune MT2060 silicon IF tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for the silicon IF tuner MT2060 from Microtune. config MEDIA_TUNER_MT2063 tristate "Microtune MT2063 silicon IF tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for the silicon IF tuner MT2063 from Microtune. config MEDIA_TUNER_MT2266 tristate "Microtune MT2266 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for the silicon baseband tuner MT2266 from Microtune. config MEDIA_TUNER_MT2131 tristate "Microtune MT2131 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for the silicon baseband tuner MT2131 from Microtune. config MEDIA_TUNER_QT1010 tristate "Quantek QT1010 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for the silicon tuner QT1010 from Quantek. config MEDIA_TUNER_XC2028 tristate "XCeive xc2028/xc3028 tuners" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y here to include support for the xc2028/xc3028 tuners. config MEDIA_TUNER_XC5000 tristate "Xceive XC5000 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for the silicon tuner XC5000 from Xceive. This device is only used inside a SiP called together with a @@ -165,7 +152,7 @@ config MEDIA_TUNER_XC5000 config MEDIA_TUNER_XC4000 tristate "Xceive XC4000 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for the silicon tuner XC4000 from Xceive. This device is only used inside a SiP called together with a @@ -174,70 +161,84 @@ config MEDIA_TUNER_XC4000 config MEDIA_TUNER_MXL5005S tristate "MaxLinear MSL5005S silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for the silicon tuner MXL5005S from MaxLinear. config MEDIA_TUNER_MXL5007T tristate "MaxLinear MxL5007T silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for the silicon tuner MxL5007T from MaxLinear. config MEDIA_TUNER_MC44S803 tristate "Freescale MC44S803 Low Power CMOS Broadband tuners" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Say Y here to support the Freescale MC44S803 based tuners config MEDIA_TUNER_MAX2165 tristate "Maxim MAX2165 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help A driver for the silicon tuner MAX2165 from Maxim. config MEDIA_TUNER_TDA18218 tristate "NXP TDA18218 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help NXP TDA18218 silicon tuner driver. config MEDIA_TUNER_FC0011 tristate "Fitipower FC0011 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Fitipower FC0011 silicon tuner driver. config MEDIA_TUNER_FC0012 tristate "Fitipower FC0012 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Fitipower FC0012 silicon tuner driver. config MEDIA_TUNER_FC0013 tristate "Fitipower FC0013 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Fitipower FC0013 silicon tuner driver. config MEDIA_TUNER_TDA18212 tristate "NXP TDA18212 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help NXP TDA18212 silicon tuner driver. +config MEDIA_TUNER_E4000 + tristate "Elonics E4000 silicon tuner" + depends on MEDIA_SUPPORT && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Elonics E4000 silicon tuner driver. + +config MEDIA_TUNER_FC2580 + tristate "FCI FC2580 silicon tuner" + depends on MEDIA_SUPPORT && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + FCI FC2580 silicon tuner driver. + config MEDIA_TUNER_TUA9001 tristate "Infineon TUA 9001 silicon tuner" depends on MEDIA_SUPPORT && I2C - default m if MEDIA_TUNER_CUSTOMISE + default m if !MEDIA_SUBDRV_AUTOSELECT help Infineon TUA 9001 silicon tuner driver. endmenu diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/tuners/Makefile similarity index 88% rename from drivers/media/common/tuners/Makefile rename to drivers/media/tuners/Makefile index 891b80e60808d6aac66c81053c13eb4d106689bd..5e569b1083cf3fd74934af1aad0a9a91e75e93cb 100644 --- a/drivers/media/common/tuners/Makefile +++ b/drivers/media/tuners/Makefile @@ -28,10 +28,12 @@ obj-$(CONFIG_MEDIA_TUNER_MC44S803) += mc44s803.o obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o obj-$(CONFIG_MEDIA_TUNER_TDA18212) += tda18212.o +obj-$(CONFIG_MEDIA_TUNER_E4000) += e4000.o +obj-$(CONFIG_MEDIA_TUNER_FC2580) += fc2580.o obj-$(CONFIG_MEDIA_TUNER_TUA9001) += tua9001.o obj-$(CONFIG_MEDIA_TUNER_FC0011) += fc0011.o obj-$(CONFIG_MEDIA_TUNER_FC0012) += fc0012.o obj-$(CONFIG_MEDIA_TUNER_FC0013) += fc0013.o -ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core -ccflags-y += -I$(srctree)/drivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb-frontends diff --git a/drivers/media/tuners/e4000.c b/drivers/media/tuners/e4000.c new file mode 100644 index 0000000000000000000000000000000000000000..1b33ed368abe1c63c28ca3e5e64d58e68b35a3d3 --- /dev/null +++ b/drivers/media/tuners/e4000.c @@ -0,0 +1,409 @@ +/* + * Elonics E4000 silicon tuner driver + * + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "e4000_priv.h" + +/* write multiple registers */ +static int e4000_wr_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + u8 buf[1 + len]; + struct i2c_msg msg[1] = { + { + .addr = priv->cfg->i2c_addr, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + } + }; + + buf[0] = reg; + memcpy(&buf[1], val, len); + + ret = i2c_transfer(priv->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* read multiple registers */ +static int e4000_rd_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + u8 buf[len]; + struct i2c_msg msg[2] = { + { + .addr = priv->cfg->i2c_addr, + .flags = 0, + .len = 1, + .buf = ®, + }, { + .addr = priv->cfg->i2c_addr, + .flags = I2C_M_RD, + .len = sizeof(buf), + .buf = buf, + } + }; + + ret = i2c_transfer(priv->i2c, msg, 2); + if (ret == 2) { + memcpy(val, buf, len); + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + + return ret; +} + +/* write single register */ +static int e4000_wr_reg(struct e4000_priv *priv, u8 reg, u8 val) +{ + return e4000_wr_regs(priv, reg, &val, 1); +} + +/* read single register */ +static int e4000_rd_reg(struct e4000_priv *priv, u8 reg, u8 *val) +{ + return e4000_rd_regs(priv, reg, val, 1); +} + +static int e4000_init(struct dvb_frontend *fe) +{ + struct e4000_priv *priv = fe->tuner_priv; + int ret; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + /* dummy I2C to ensure I2C wakes up */ + ret = e4000_wr_reg(priv, 0x02, 0x40); + + /* reset */ + ret = e4000_wr_reg(priv, 0x00, 0x01); + if (ret < 0) + goto err; + + /* disable output clock */ + ret = e4000_wr_reg(priv, 0x06, 0x00); + if (ret < 0) + goto err; + + ret = e4000_wr_reg(priv, 0x7a, 0x96); + if (ret < 0) + goto err; + + /* configure gains */ + ret = e4000_wr_regs(priv, 0x7e, "\x01\xfe", 2); + if (ret < 0) + goto err; + + ret = e4000_wr_reg(priv, 0x82, 0x00); + if (ret < 0) + goto err; + + ret = e4000_wr_reg(priv, 0x24, 0x05); + if (ret < 0) + goto err; + + ret = e4000_wr_regs(priv, 0x87, "\x20\x01", 2); + if (ret < 0) + goto err; + + ret = e4000_wr_regs(priv, 0x9f, "\x7f\x07", 2); + if (ret < 0) + goto err; + + /* + * TODO: Implement DC offset control correctly. + * DC offsets has quite much effect for received signal quality in case + * of direct conversion tuners (Zero-IF). Surely we will now lose few + * decimals or even decibels from SNR... + */ + /* DC offset control */ + ret = e4000_wr_reg(priv, 0x2d, 0x0c); + if (ret < 0) + goto err; + + /* gain control */ + ret = e4000_wr_reg(priv, 0x1a, 0x17); + if (ret < 0) + goto err; + + ret = e4000_wr_reg(priv, 0x1f, 0x1a); + if (ret < 0) + goto err; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return 0; +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int e4000_sleep(struct dvb_frontend *fe) +{ + struct e4000_priv *priv = fe->tuner_priv; + int ret; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = e4000_wr_reg(priv, 0x00, 0x00); + if (ret < 0) + goto err; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return 0; +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int e4000_set_params(struct dvb_frontend *fe) +{ + struct e4000_priv *priv = fe->tuner_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i, sigma_delta; + unsigned int f_VCO; + u8 buf[5]; + + dev_dbg(&priv->i2c->dev, "%s: delivery_system=%d frequency=%d " \ + "bandwidth_hz=%d\n", __func__, + c->delivery_system, c->frequency, c->bandwidth_hz); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + /* gain control manual */ + ret = e4000_wr_reg(priv, 0x1a, 0x00); + if (ret < 0) + goto err; + + /* PLL */ + for (i = 0; i < ARRAY_SIZE(e4000_pll_lut); i++) { + if (c->frequency <= e4000_pll_lut[i].freq) + break; + } + + if (i == ARRAY_SIZE(e4000_pll_lut)) + goto err; + + /* + * Note: Currently f_VCO overflows when c->frequency is 1 073 741 824 Hz + * or more. + */ + f_VCO = c->frequency * e4000_pll_lut[i].mul; + sigma_delta = 0x10000UL * (f_VCO % priv->cfg->clock) / priv->cfg->clock; + buf[0] = f_VCO / priv->cfg->clock; + buf[1] = (sigma_delta >> 0) & 0xff; + buf[2] = (sigma_delta >> 8) & 0xff; + buf[3] = 0x00; + buf[4] = e4000_pll_lut[i].div; + + dev_dbg(&priv->i2c->dev, "%s: f_VCO=%u pll div=%d sigma_delta=%04x\n", + __func__, f_VCO, buf[0], sigma_delta); + + ret = e4000_wr_regs(priv, 0x09, buf, 5); + if (ret < 0) + goto err; + + /* LNA filter (RF filter) */ + for (i = 0; i < ARRAY_SIZE(e400_lna_filter_lut); i++) { + if (c->frequency <= e400_lna_filter_lut[i].freq) + break; + } + + if (i == ARRAY_SIZE(e400_lna_filter_lut)) + goto err; + + ret = e4000_wr_reg(priv, 0x10, e400_lna_filter_lut[i].val); + if (ret < 0) + goto err; + + /* IF filters */ + for (i = 0; i < ARRAY_SIZE(e4000_if_filter_lut); i++) { + if (c->bandwidth_hz <= e4000_if_filter_lut[i].freq) + break; + } + + if (i == ARRAY_SIZE(e4000_if_filter_lut)) + goto err; + + buf[0] = e4000_if_filter_lut[i].reg11_val; + buf[1] = e4000_if_filter_lut[i].reg12_val; + + ret = e4000_wr_regs(priv, 0x11, buf, 2); + if (ret < 0) + goto err; + + /* frequency band */ + for (i = 0; i < ARRAY_SIZE(e4000_band_lut); i++) { + if (c->frequency <= e4000_band_lut[i].freq) + break; + } + + if (i == ARRAY_SIZE(e4000_band_lut)) + goto err; + + ret = e4000_wr_reg(priv, 0x07, e4000_band_lut[i].reg07_val); + if (ret < 0) + goto err; + + ret = e4000_wr_reg(priv, 0x78, e4000_band_lut[i].reg78_val); + if (ret < 0) + goto err; + + /* gain control auto */ + ret = e4000_wr_reg(priv, 0x1a, 0x17); + if (ret < 0) + goto err; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return 0; +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int e4000_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct e4000_priv *priv = fe->tuner_priv; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + *frequency = 0; /* Zero-IF */ + + return 0; +} + +static int e4000_release(struct dvb_frontend *fe) +{ + struct e4000_priv *priv = fe->tuner_priv; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + kfree(fe->tuner_priv); + + return 0; +} + +static const struct dvb_tuner_ops e4000_tuner_ops = { + .info = { + .name = "Elonics E4000", + .frequency_min = 174000000, + .frequency_max = 862000000, + }, + + .release = e4000_release, + + .init = e4000_init, + .sleep = e4000_sleep, + .set_params = e4000_set_params, + + .get_if_frequency = e4000_get_if_frequency, +}; + +struct dvb_frontend *e4000_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, const struct e4000_config *cfg) +{ + struct e4000_priv *priv; + int ret; + u8 chip_id; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + priv = kzalloc(sizeof(struct e4000_priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + dev_err(&i2c->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME); + goto err; + } + + priv->cfg = cfg; + priv->i2c = i2c; + + /* check if the tuner is there */ + ret = e4000_rd_reg(priv, 0x02, &chip_id); + if (ret < 0) + goto err; + + dev_dbg(&priv->i2c->dev, "%s: chip_id=%02x\n", __func__, chip_id); + + if (chip_id != 0x40) + goto err; + + /* put sleep as chip seems to be in normal mode by default */ + ret = e4000_wr_reg(priv, 0x00, 0x00); + if (ret < 0) + goto err; + + dev_info(&priv->i2c->dev, + "%s: Elonics E4000 successfully identified\n", + KBUILD_MODNAME); + + fe->tuner_priv = priv; + memcpy(&fe->ops.tuner_ops, &e4000_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return fe; +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); + kfree(priv); + return NULL; +} +EXPORT_SYMBOL(e4000_attach); + +MODULE_DESCRIPTION("Elonics E4000 silicon tuner driver"); +MODULE_AUTHOR("Antti Palosaari "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/tuners/e4000.h b/drivers/media/tuners/e4000.h new file mode 100644 index 0000000000000000000000000000000000000000..71b1935eb3d25229f7d35b08edfc35f71f09619c --- /dev/null +++ b/drivers/media/tuners/e4000.h @@ -0,0 +1,52 @@ +/* + * Elonics E4000 silicon tuner driver + * + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef E4000_H +#define E4000_H + +#include "dvb_frontend.h" + +struct e4000_config { + /* + * I2C address + * 0x64, 0x65, 0x66, 0x67 + */ + u8 i2c_addr; + + /* + * clock + */ + u32 clock; +}; + +#if defined(CONFIG_MEDIA_TUNER_E4000) || \ + (defined(CONFIG_MEDIA_TUNER_E4000_MODULE) && defined(MODULE)) +extern struct dvb_frontend *e4000_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, const struct e4000_config *cfg); +#else +static inline struct dvb_frontend *e4000_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, const struct e4000_config *cfg) +{ + pr_warn("%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/tuners/e4000_priv.h b/drivers/media/tuners/e4000_priv.h new file mode 100644 index 0000000000000000000000000000000000000000..a3855053e78f57c7d2f4450b8328c2fac00aeaf6 --- /dev/null +++ b/drivers/media/tuners/e4000_priv.h @@ -0,0 +1,147 @@ +/* + * Elonics E4000 silicon tuner driver + * + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef E4000_PRIV_H +#define E4000_PRIV_H + +#include "e4000.h" + +struct e4000_priv { + const struct e4000_config *cfg; + struct i2c_adapter *i2c; +}; + +struct e4000_pll { + u32 freq; + u8 div; + u8 mul; +}; + +static const struct e4000_pll e4000_pll_lut[] = { +/* VCO min VCO max */ + { 72400000, 0x0f, 48 }, /* .......... 3475200000 */ + { 81200000, 0x0e, 40 }, /* 2896000000 3248000000 */ + { 108300000, 0x0d, 32 }, /* 2598400000 3465600000 */ + { 162500000, 0x0c, 24 }, /* 2599200000 3900000000 */ + { 216600000, 0x0b, 16 }, /* 2600000000 3465600000 */ + { 325000000, 0x0a, 12 }, /* 2599200000 3900000000 */ + { 350000000, 0x09, 8 }, /* 2600000000 2800000000 */ + { 432000000, 0x03, 8 }, /* 2800000000 3456000000 */ + { 667000000, 0x02, 6 }, /* 2592000000 4002000000 */ + { 1200000000, 0x01, 4 }, /* 2668000000 4800000000 */ + { 0xffffffff, 0x00, 2 }, /* 2400000000 .......... */ +}; + +struct e4000_lna_filter { + u32 freq; + u8 val; +}; + +static const struct e4000_lna_filter e400_lna_filter_lut[] = { + { 370000000, 0 }, + { 392500000, 1 }, + { 415000000, 2 }, + { 437500000, 3 }, + { 462500000, 4 }, + { 490000000, 5 }, + { 522500000, 6 }, + { 557500000, 7 }, + { 595000000, 8 }, + { 642500000, 9 }, + { 695000000, 10 }, + { 740000000, 11 }, + { 800000000, 12 }, + { 865000000, 13 }, + { 930000000, 14 }, + { 1000000000, 15 }, + { 1310000000, 0 }, + { 1340000000, 1 }, + { 1385000000, 2 }, + { 1427500000, 3 }, + { 1452500000, 4 }, + { 1475000000, 5 }, + { 1510000000, 6 }, + { 1545000000, 7 }, + { 1575000000, 8 }, + { 1615000000, 9 }, + { 1650000000, 10 }, + { 1670000000, 11 }, + { 1690000000, 12 }, + { 1710000000, 13 }, + { 1735000000, 14 }, + { 0xffffffff, 15 }, +}; + +struct e4000_band { + u32 freq; + u8 reg07_val; + u8 reg78_val; +}; + +static const struct e4000_band e4000_band_lut[] = { + { 140000000, 0x01, 0x03 }, + { 350000000, 0x03, 0x03 }, + { 1000000000, 0x05, 0x03 }, + { 0xffffffff, 0x07, 0x00 }, +}; + +struct e4000_if_filter { + u32 freq; + u8 reg11_val; + u8 reg12_val; +}; + +static const struct e4000_if_filter e4000_if_filter_lut[] = { + { 4300000, 0xfd, 0x1f }, + { 4400000, 0xfd, 0x1e }, + { 4480000, 0xfc, 0x1d }, + { 4560000, 0xfc, 0x1c }, + { 4600000, 0xfc, 0x1b }, + { 4800000, 0xfc, 0x1a }, + { 4900000, 0xfc, 0x19 }, + { 5000000, 0xfc, 0x18 }, + { 5100000, 0xfc, 0x17 }, + { 5200000, 0xfc, 0x16 }, + { 5400000, 0xfc, 0x15 }, + { 5500000, 0xfc, 0x14 }, + { 5600000, 0xfc, 0x13 }, + { 5800000, 0xfb, 0x12 }, + { 5900000, 0xfb, 0x11 }, + { 6000000, 0xfb, 0x10 }, + { 6200000, 0xfb, 0x0f }, + { 6400000, 0xfa, 0x0e }, + { 6600000, 0xfa, 0x0d }, + { 6800000, 0xf9, 0x0c }, + { 7200000, 0xf9, 0x0b }, + { 7400000, 0xf9, 0x0a }, + { 7600000, 0xf8, 0x09 }, + { 7800000, 0xf8, 0x08 }, + { 8200000, 0xf8, 0x07 }, + { 8600000, 0xf7, 0x06 }, + { 8800000, 0xf7, 0x05 }, + { 9200000, 0xf7, 0x04 }, + { 9600000, 0xf6, 0x03 }, + { 10000000, 0xf6, 0x02 }, + { 10600000, 0xf5, 0x01 }, + { 11000000, 0xf5, 0x00 }, + { 0xffffffff, 0x00, 0x20 }, +}; + +#endif diff --git a/drivers/media/common/tuners/fc0011.c b/drivers/media/tuners/fc0011.c similarity index 100% rename from drivers/media/common/tuners/fc0011.c rename to drivers/media/tuners/fc0011.c diff --git a/drivers/media/common/tuners/fc0011.h b/drivers/media/tuners/fc0011.h similarity index 100% rename from drivers/media/common/tuners/fc0011.h rename to drivers/media/tuners/fc0011.h diff --git a/drivers/media/common/tuners/fc0012-priv.h b/drivers/media/tuners/fc0012-priv.h similarity index 100% rename from drivers/media/common/tuners/fc0012-priv.h rename to drivers/media/tuners/fc0012-priv.h diff --git a/drivers/media/common/tuners/fc0012.c b/drivers/media/tuners/fc0012.c similarity index 100% rename from drivers/media/common/tuners/fc0012.c rename to drivers/media/tuners/fc0012.c diff --git a/drivers/media/common/tuners/fc0012.h b/drivers/media/tuners/fc0012.h similarity index 100% rename from drivers/media/common/tuners/fc0012.h rename to drivers/media/tuners/fc0012.h diff --git a/drivers/media/common/tuners/fc0013-priv.h b/drivers/media/tuners/fc0013-priv.h similarity index 100% rename from drivers/media/common/tuners/fc0013-priv.h rename to drivers/media/tuners/fc0013-priv.h diff --git a/drivers/media/common/tuners/fc0013.c b/drivers/media/tuners/fc0013.c similarity index 100% rename from drivers/media/common/tuners/fc0013.c rename to drivers/media/tuners/fc0013.c diff --git a/drivers/media/common/tuners/fc0013.h b/drivers/media/tuners/fc0013.h similarity index 100% rename from drivers/media/common/tuners/fc0013.h rename to drivers/media/tuners/fc0013.h diff --git a/drivers/media/common/tuners/fc001x-common.h b/drivers/media/tuners/fc001x-common.h similarity index 100% rename from drivers/media/common/tuners/fc001x-common.h rename to drivers/media/tuners/fc001x-common.h diff --git a/drivers/media/tuners/fc2580.c b/drivers/media/tuners/fc2580.c new file mode 100644 index 0000000000000000000000000000000000000000..aff39ae457a0d1c469ea8ff1e9a4e81136347a17 --- /dev/null +++ b/drivers/media/tuners/fc2580.c @@ -0,0 +1,529 @@ +/* + * FCI FC2580 silicon tuner driver + * + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "fc2580_priv.h" + +/* + * TODO: + * I2C write and read works only for one single register. Multiple registers + * could not be accessed using normal register address auto-increment. + * There could be (very likely) register to change that behavior.... + * + * Due to that limitation functions: + * fc2580_wr_regs() + * fc2580_rd_regs() + * could not be used for accessing more than one register at once. + * + * TODO: + * Currently it blind writes bunch of static registers from the + * fc2580_freq_regs_lut[] when fc2580_set_params() is called. Add some + * logic to reduce unneeded register writes. + * There is also don't-care registers, initialized with value 0xff, and those + * are also written to the chip currently (yes, not wise). + */ + +/* write multiple registers */ +static int fc2580_wr_regs(struct fc2580_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + u8 buf[1 + len]; + struct i2c_msg msg[1] = { + { + .addr = priv->cfg->i2c_addr, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + } + }; + + buf[0] = reg; + memcpy(&buf[1], val, len); + + ret = i2c_transfer(priv->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* read multiple registers */ +static int fc2580_rd_regs(struct fc2580_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + u8 buf[len]; + struct i2c_msg msg[2] = { + { + .addr = priv->cfg->i2c_addr, + .flags = 0, + .len = 1, + .buf = ®, + }, { + .addr = priv->cfg->i2c_addr, + .flags = I2C_M_RD, + .len = sizeof(buf), + .buf = buf, + } + }; + + ret = i2c_transfer(priv->i2c, msg, 2); + if (ret == 2) { + memcpy(val, buf, len); + ret = 0; + } else { + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); + ret = -EREMOTEIO; + } + + return ret; +} + +/* write single register */ +static int fc2580_wr_reg(struct fc2580_priv *priv, u8 reg, u8 val) +{ + return fc2580_wr_regs(priv, reg, &val, 1); +} + +/* read single register */ +static int fc2580_rd_reg(struct fc2580_priv *priv, u8 reg, u8 *val) +{ + return fc2580_rd_regs(priv, reg, val, 1); +} + +static int fc2580_set_params(struct dvb_frontend *fe) +{ + struct fc2580_priv *priv = fe->tuner_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret = 0, i; + unsigned int r_val, n_val, k_val, k_val_reg, f_ref; + u8 tmp_val, r18_val; + u64 f_vco; + + /* + * Fractional-N synthesizer/PLL. + * Most likely all those PLL calculations are not correct. I am not + * sure, but it looks like it is divider based Fractional-N synthesizer. + * There is divider for reference clock too? + * Anyhow, synthesizer calculation results seems to be quite correct. + */ + + dev_dbg(&priv->i2c->dev, "%s: delivery_system=%d frequency=%d " \ + "bandwidth_hz=%d\n", __func__, + c->delivery_system, c->frequency, c->bandwidth_hz); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + /* PLL */ + for (i = 0; i < ARRAY_SIZE(fc2580_pll_lut); i++) { + if (c->frequency <= fc2580_pll_lut[i].freq) + break; + } + + if (i == ARRAY_SIZE(fc2580_pll_lut)) + goto err; + + f_vco = c->frequency; + f_vco *= fc2580_pll_lut[i].div; + + if (f_vco >= 2600000000UL) + tmp_val = 0x0e | fc2580_pll_lut[i].band; + else + tmp_val = 0x06 | fc2580_pll_lut[i].band; + + ret = fc2580_wr_reg(priv, 0x02, tmp_val); + if (ret < 0) + goto err; + + if (f_vco >= 2UL * 76 * priv->cfg->clock) { + r_val = 1; + r18_val = 0x00; + } else if (f_vco >= 1UL * 76 * priv->cfg->clock) { + r_val = 2; + r18_val = 0x10; + } else { + r_val = 4; + r18_val = 0x20; + } + + f_ref = 2UL * priv->cfg->clock / r_val; + n_val = div_u64_rem(f_vco, f_ref, &k_val); + k_val_reg = 1UL * k_val * (1 << 20) / f_ref; + + ret = fc2580_wr_reg(priv, 0x18, r18_val | ((k_val_reg >> 16) & 0xff)); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x1a, (k_val_reg >> 8) & 0xff); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x1b, (k_val_reg >> 0) & 0xff); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x1c, n_val); + if (ret < 0) + goto err; + + if (priv->cfg->clock >= 28000000) { + ret = fc2580_wr_reg(priv, 0x4b, 0x22); + if (ret < 0) + goto err; + } + + if (fc2580_pll_lut[i].band == 0x00) { + if (c->frequency <= 794000000) + tmp_val = 0x9f; + else + tmp_val = 0x8f; + + ret = fc2580_wr_reg(priv, 0x2d, tmp_val); + if (ret < 0) + goto err; + } + + /* registers */ + for (i = 0; i < ARRAY_SIZE(fc2580_freq_regs_lut); i++) { + if (c->frequency <= fc2580_freq_regs_lut[i].freq) + break; + } + + if (i == ARRAY_SIZE(fc2580_freq_regs_lut)) + goto err; + + ret = fc2580_wr_reg(priv, 0x25, fc2580_freq_regs_lut[i].r25_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x27, fc2580_freq_regs_lut[i].r27_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x28, fc2580_freq_regs_lut[i].r28_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x29, fc2580_freq_regs_lut[i].r29_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x2b, fc2580_freq_regs_lut[i].r2b_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x2c, fc2580_freq_regs_lut[i].r2c_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x2d, fc2580_freq_regs_lut[i].r2d_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x30, fc2580_freq_regs_lut[i].r30_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x44, fc2580_freq_regs_lut[i].r44_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x50, fc2580_freq_regs_lut[i].r50_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x53, fc2580_freq_regs_lut[i].r53_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x5f, fc2580_freq_regs_lut[i].r5f_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x61, fc2580_freq_regs_lut[i].r61_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x62, fc2580_freq_regs_lut[i].r62_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x63, fc2580_freq_regs_lut[i].r63_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x67, fc2580_freq_regs_lut[i].r67_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x68, fc2580_freq_regs_lut[i].r68_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x69, fc2580_freq_regs_lut[i].r69_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x6a, fc2580_freq_regs_lut[i].r6a_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x6b, fc2580_freq_regs_lut[i].r6b_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x6c, fc2580_freq_regs_lut[i].r6c_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x6d, fc2580_freq_regs_lut[i].r6d_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x6e, fc2580_freq_regs_lut[i].r6e_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x6f, fc2580_freq_regs_lut[i].r6f_val); + if (ret < 0) + goto err; + + /* IF filters */ + for (i = 0; i < ARRAY_SIZE(fc2580_if_filter_lut); i++) { + if (c->bandwidth_hz <= fc2580_if_filter_lut[i].freq) + break; + } + + if (i == ARRAY_SIZE(fc2580_if_filter_lut)) + goto err; + + ret = fc2580_wr_reg(priv, 0x36, fc2580_if_filter_lut[i].r36_val); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x37, 1UL * priv->cfg->clock * \ + fc2580_if_filter_lut[i].mul / 1000000000); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x39, fc2580_if_filter_lut[i].r39_val); + if (ret < 0) + goto err; + + /* calibration? */ + ret = fc2580_wr_reg(priv, 0x2e, 0x09); + if (ret < 0) + goto err; + + for (i = 0; i < 5; i++) { + ret = fc2580_rd_reg(priv, 0x2f, &tmp_val); + if (ret < 0) + goto err; + + /* done when [7:6] are set */ + if ((tmp_val & 0xc0) == 0xc0) + break; + + ret = fc2580_wr_reg(priv, 0x2e, 0x01); + if (ret < 0) + goto err; + + ret = fc2580_wr_reg(priv, 0x2e, 0x09); + if (ret < 0) + goto err; + + usleep_range(5000, 25000); + } + + dev_dbg(&priv->i2c->dev, "%s: loop=%i\n", __func__, i); + + ret = fc2580_wr_reg(priv, 0x2e, 0x01); + if (ret < 0) + goto err; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return 0; +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int fc2580_init(struct dvb_frontend *fe) +{ + struct fc2580_priv *priv = fe->tuner_priv; + int ret, i; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + for (i = 0; i < ARRAY_SIZE(fc2580_init_reg_vals); i++) { + ret = fc2580_wr_reg(priv, fc2580_init_reg_vals[i].reg, + fc2580_init_reg_vals[i].val); + if (ret < 0) + goto err; + } + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return 0; +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int fc2580_sleep(struct dvb_frontend *fe) +{ + struct fc2580_priv *priv = fe->tuner_priv; + int ret; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = fc2580_wr_reg(priv, 0x02, 0x0a); + if (ret < 0) + goto err; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return 0; +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int fc2580_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct fc2580_priv *priv = fe->tuner_priv; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + *frequency = 0; /* Zero-IF */ + + return 0; +} + +static int fc2580_release(struct dvb_frontend *fe) +{ + struct fc2580_priv *priv = fe->tuner_priv; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + kfree(fe->tuner_priv); + + return 0; +} + +static const struct dvb_tuner_ops fc2580_tuner_ops = { + .info = { + .name = "FCI FC2580", + .frequency_min = 174000000, + .frequency_max = 862000000, + }, + + .release = fc2580_release, + + .init = fc2580_init, + .sleep = fc2580_sleep, + .set_params = fc2580_set_params, + + .get_if_frequency = fc2580_get_if_frequency, +}; + +struct dvb_frontend *fc2580_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, const struct fc2580_config *cfg) +{ + struct fc2580_priv *priv; + int ret; + u8 chip_id; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + priv = kzalloc(sizeof(struct fc2580_priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + dev_err(&i2c->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME); + goto err; + } + + priv->cfg = cfg; + priv->i2c = i2c; + + /* check if the tuner is there */ + ret = fc2580_rd_reg(priv, 0x01, &chip_id); + if (ret < 0) + goto err; + + dev_dbg(&priv->i2c->dev, "%s: chip_id=%02x\n", __func__, chip_id); + + switch (chip_id) { + case 0x56: + case 0x5a: + break; + default: + goto err; + } + + dev_info(&priv->i2c->dev, + "%s: FCI FC2580 successfully identified\n", + KBUILD_MODNAME); + + fe->tuner_priv = priv; + memcpy(&fe->ops.tuner_ops, &fc2580_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return fe; +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); + kfree(priv); + return NULL; +} +EXPORT_SYMBOL(fc2580_attach); + +MODULE_DESCRIPTION("FCI FC2580 silicon tuner driver"); +MODULE_AUTHOR("Antti Palosaari "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/tuners/fc2580.h b/drivers/media/tuners/fc2580.h new file mode 100644 index 0000000000000000000000000000000000000000..222601e5d23be5e321945c677ded9d0087c477ed --- /dev/null +++ b/drivers/media/tuners/fc2580.h @@ -0,0 +1,52 @@ +/* + * FCI FC2580 silicon tuner driver + * + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef FC2580_H +#define FC2580_H + +#include "dvb_frontend.h" + +struct fc2580_config { + /* + * I2C address + * 0x56, ... + */ + u8 i2c_addr; + + /* + * clock + */ + u32 clock; +}; + +#if defined(CONFIG_MEDIA_TUNER_FC2580) || \ + (defined(CONFIG_MEDIA_TUNER_FC2580_MODULE) && defined(MODULE)) +extern struct dvb_frontend *fc2580_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, const struct fc2580_config *cfg); +#else +static inline struct dvb_frontend *fc2580_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, const struct fc2580_config *cfg) +{ + pr_warn("%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/tuners/fc2580_priv.h b/drivers/media/tuners/fc2580_priv.h new file mode 100644 index 0000000000000000000000000000000000000000..be38a9e637e08d20f673cb0c8de85fea608442d8 --- /dev/null +++ b/drivers/media/tuners/fc2580_priv.h @@ -0,0 +1,134 @@ +/* + * FCI FC2580 silicon tuner driver + * + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef FC2580_PRIV_H +#define FC2580_PRIV_H + +#include "fc2580.h" + +struct fc2580_reg_val { + u8 reg; + u8 val; +}; + +static const struct fc2580_reg_val fc2580_init_reg_vals[] = { + {0x00, 0x00}, + {0x12, 0x86}, + {0x14, 0x5c}, + {0x16, 0x3c}, + {0x1f, 0xd2}, + {0x09, 0xd7}, + {0x0b, 0xd5}, + {0x0c, 0x32}, + {0x0e, 0x43}, + {0x21, 0x0a}, + {0x22, 0x82}, + {0x45, 0x10}, + {0x4c, 0x00}, + {0x3f, 0x88}, + {0x02, 0x0e}, + {0x58, 0x14}, +}; + +struct fc2580_pll { + u32 freq; + u8 div; + u8 band; +}; + +static const struct fc2580_pll fc2580_pll_lut[] = { + /* VCO min VCO max */ + { 400000000, 12, 0x80}, /* .......... 4800000000 */ + {1000000000, 4, 0x00}, /* 1600000000 4000000000 */ + {0xffffffff, 2, 0x40}, /* 2000000000 .......... */ +}; + +struct fc2580_if_filter { + u32 freq; + u16 mul; + u8 r36_val; + u8 r39_val; +}; + +static const struct fc2580_if_filter fc2580_if_filter_lut[] = { + { 6000000, 4400, 0x18, 0x00}, + { 7000000, 3910, 0x18, 0x80}, + { 8000000, 3300, 0x18, 0x80}, + {0xffffffff, 3300, 0x18, 0x80}, +}; + +struct fc2580_freq_regs { + u32 freq; + u8 r25_val; + u8 r27_val; + u8 r28_val; + u8 r29_val; + u8 r2b_val; + u8 r2c_val; + u8 r2d_val; + u8 r30_val; + u8 r44_val; + u8 r50_val; + u8 r53_val; + u8 r5f_val; + u8 r61_val; + u8 r62_val; + u8 r63_val; + u8 r67_val; + u8 r68_val; + u8 r69_val; + u8 r6a_val; + u8 r6b_val; + u8 r6c_val; + u8 r6d_val; + u8 r6e_val; + u8 r6f_val; +}; + +/* XXX: 0xff is used for don't-care! */ +static const struct fc2580_freq_regs fc2580_freq_regs_lut[] = { + { 400000000, + 0xff, 0x77, 0x33, 0x40, 0xff, 0xff, 0xff, 0x09, 0xff, 0x8c, + 0x50, 0x0f, 0x07, 0x00, 0x15, 0x03, 0x05, 0x10, 0x12, 0x08, + 0x0a, 0x78, 0x32, 0x54}, + { 538000000, + 0xf0, 0x77, 0x53, 0x60, 0xff, 0xff, 0xff, 0x09, 0xff, 0x8c, + 0x50, 0x13, 0x07, 0x06, 0x15, 0x06, 0x08, 0x10, 0x12, 0x0b, + 0x0c, 0x78, 0x32, 0x14}, + { 794000000, + 0xf0, 0x77, 0x53, 0x60, 0xff, 0xff, 0xff, 0x09, 0xff, 0x8c, + 0x50, 0x15, 0x03, 0x03, 0x15, 0x03, 0x05, 0x0c, 0x0e, 0x0b, + 0x0c, 0x78, 0x32, 0x14}, + {1000000000, + 0xf0, 0x77, 0x53, 0x60, 0xff, 0xff, 0xff, 0x09, 0xff, 0x8c, + 0x50, 0x15, 0x07, 0x06, 0x15, 0x07, 0x09, 0x10, 0x12, 0x0b, + 0x0c, 0x78, 0x32, 0x14}, + {0xffffffff, + 0xff, 0xff, 0xff, 0xff, 0x70, 0x37, 0xe7, 0x09, 0x20, 0x8c, + 0x50, 0x0f, 0x0f, 0x00, 0x13, 0x00, 0x02, 0x0c, 0x0e, 0x08, + 0x0a, 0xa0, 0x50, 0x14}, +}; + +struct fc2580_priv { + const struct fc2580_config *cfg; + struct i2c_adapter *i2c; +}; + +#endif diff --git a/drivers/media/common/tuners/max2165.c b/drivers/media/tuners/max2165.c similarity index 100% rename from drivers/media/common/tuners/max2165.c rename to drivers/media/tuners/max2165.c diff --git a/drivers/media/common/tuners/max2165.h b/drivers/media/tuners/max2165.h similarity index 100% rename from drivers/media/common/tuners/max2165.h rename to drivers/media/tuners/max2165.h diff --git a/drivers/media/common/tuners/max2165_priv.h b/drivers/media/tuners/max2165_priv.h similarity index 100% rename from drivers/media/common/tuners/max2165_priv.h rename to drivers/media/tuners/max2165_priv.h diff --git a/drivers/media/common/tuners/mc44s803.c b/drivers/media/tuners/mc44s803.c similarity index 97% rename from drivers/media/common/tuners/mc44s803.c rename to drivers/media/tuners/mc44s803.c index 5ddce7e326f743043d8cdaa87c5c1f3ca8c079d4..f1b76407466102950f75893f8cd3533a714595e4 100644 --- a/drivers/media/common/tuners/mc44s803.c +++ b/drivers/media/tuners/mc44s803.c @@ -298,6 +298,12 @@ static int mc44s803_get_frequency(struct dvb_frontend *fe, u32 *frequency) return 0; } +static int mc44s803_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + *frequency = MC44S803_IF2; /* 36.125 MHz */ + return 0; +} + static const struct dvb_tuner_ops mc44s803_tuner_ops = { .info = { .name = "Freescale MC44S803", @@ -309,7 +315,8 @@ static const struct dvb_tuner_ops mc44s803_tuner_ops = { .release = mc44s803_release, .init = mc44s803_init, .set_params = mc44s803_set_params, - .get_frequency = mc44s803_get_frequency + .get_frequency = mc44s803_get_frequency, + .get_if_frequency = mc44s803_get_if_frequency, }; /* This functions tries to identify a MC44S803 tuner by reading the ID diff --git a/drivers/media/common/tuners/mc44s803.h b/drivers/media/tuners/mc44s803.h similarity index 100% rename from drivers/media/common/tuners/mc44s803.h rename to drivers/media/tuners/mc44s803.h diff --git a/drivers/media/common/tuners/mc44s803_priv.h b/drivers/media/tuners/mc44s803_priv.h similarity index 100% rename from drivers/media/common/tuners/mc44s803_priv.h rename to drivers/media/tuners/mc44s803_priv.h diff --git a/drivers/media/common/tuners/mt2060.c b/drivers/media/tuners/mt2060.c similarity index 100% rename from drivers/media/common/tuners/mt2060.c rename to drivers/media/tuners/mt2060.c diff --git a/drivers/media/common/tuners/mt2060.h b/drivers/media/tuners/mt2060.h similarity index 100% rename from drivers/media/common/tuners/mt2060.h rename to drivers/media/tuners/mt2060.h diff --git a/drivers/media/common/tuners/mt2060_priv.h b/drivers/media/tuners/mt2060_priv.h similarity index 100% rename from drivers/media/common/tuners/mt2060_priv.h rename to drivers/media/tuners/mt2060_priv.h diff --git a/drivers/media/common/tuners/mt2063.c b/drivers/media/tuners/mt2063.c similarity index 100% rename from drivers/media/common/tuners/mt2063.c rename to drivers/media/tuners/mt2063.c diff --git a/drivers/media/common/tuners/mt2063.h b/drivers/media/tuners/mt2063.h similarity index 100% rename from drivers/media/common/tuners/mt2063.h rename to drivers/media/tuners/mt2063.h diff --git a/drivers/media/common/tuners/mt20xx.c b/drivers/media/tuners/mt20xx.c similarity index 100% rename from drivers/media/common/tuners/mt20xx.c rename to drivers/media/tuners/mt20xx.c diff --git a/drivers/media/common/tuners/mt20xx.h b/drivers/media/tuners/mt20xx.h similarity index 100% rename from drivers/media/common/tuners/mt20xx.h rename to drivers/media/tuners/mt20xx.h diff --git a/drivers/media/common/tuners/mt2131.c b/drivers/media/tuners/mt2131.c similarity index 100% rename from drivers/media/common/tuners/mt2131.c rename to drivers/media/tuners/mt2131.c diff --git a/drivers/media/common/tuners/mt2131.h b/drivers/media/tuners/mt2131.h similarity index 100% rename from drivers/media/common/tuners/mt2131.h rename to drivers/media/tuners/mt2131.h diff --git a/drivers/media/common/tuners/mt2131_priv.h b/drivers/media/tuners/mt2131_priv.h similarity index 100% rename from drivers/media/common/tuners/mt2131_priv.h rename to drivers/media/tuners/mt2131_priv.h diff --git a/drivers/media/common/tuners/mt2266.c b/drivers/media/tuners/mt2266.c similarity index 100% rename from drivers/media/common/tuners/mt2266.c rename to drivers/media/tuners/mt2266.c diff --git a/drivers/media/common/tuners/mt2266.h b/drivers/media/tuners/mt2266.h similarity index 100% rename from drivers/media/common/tuners/mt2266.h rename to drivers/media/tuners/mt2266.h diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/tuners/mxl5005s.c similarity index 99% rename from drivers/media/common/tuners/mxl5005s.c rename to drivers/media/tuners/mxl5005s.c index 6133315fb0e34ed5b48ba5e26c2bc48e249d8722..b473b76cb278b52f316cdb6249cba5da667e7d41 100644 --- a/drivers/media/common/tuners/mxl5005s.c +++ b/drivers/media/tuners/mxl5005s.c @@ -4054,6 +4054,16 @@ static int mxl5005s_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) return 0; } +static int mxl5005s_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct mxl5005s_state *state = fe->tuner_priv; + dprintk(1, "%s()\n", __func__); + + *frequency = state->IF_OUT; + + return 0; +} + static int mxl5005s_release(struct dvb_frontend *fe) { dprintk(1, "%s()\n", __func__); @@ -4076,6 +4086,7 @@ static const struct dvb_tuner_ops mxl5005s_tuner_ops = { .set_params = mxl5005s_set_params, .get_frequency = mxl5005s_get_frequency, .get_bandwidth = mxl5005s_get_bandwidth, + .get_if_frequency = mxl5005s_get_if_frequency, }; struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe, diff --git a/drivers/media/common/tuners/mxl5005s.h b/drivers/media/tuners/mxl5005s.h similarity index 100% rename from drivers/media/common/tuners/mxl5005s.h rename to drivers/media/tuners/mxl5005s.h diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/tuners/mxl5007t.c similarity index 100% rename from drivers/media/common/tuners/mxl5007t.c rename to drivers/media/tuners/mxl5007t.c diff --git a/drivers/media/common/tuners/mxl5007t.h b/drivers/media/tuners/mxl5007t.h similarity index 100% rename from drivers/media/common/tuners/mxl5007t.h rename to drivers/media/tuners/mxl5007t.h diff --git a/drivers/media/common/tuners/qt1010.c b/drivers/media/tuners/qt1010.c similarity index 90% rename from drivers/media/common/tuners/qt1010.c rename to drivers/media/tuners/qt1010.c index 2d79b1f5d5ebcebe9a00321ee278239ca64d0a7f..bc419f8a967152d02caf0bc11cb9491753b649a4 100644 --- a/drivers/media/common/tuners/qt1010.c +++ b/drivers/media/tuners/qt1010.c @@ -21,15 +21,6 @@ #include "qt1010.h" #include "qt1010_priv.h" -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); - -#define dprintk(args...) \ - do { \ - if (debug) printk(KERN_DEBUG "QT1010: " args); \ - } while (0) - /* read single register */ static int qt1010_readreg(struct qt1010_priv *priv, u8 reg, u8 *val) { @@ -41,7 +32,8 @@ static int qt1010_readreg(struct qt1010_priv *priv, u8 reg, u8 *val) }; if (i2c_transfer(priv->i2c, msg, 2) != 2) { - printk(KERN_WARNING "qt1010 I2C read failed\n"); + dev_warn(&priv->i2c->dev, "%s: i2c rd failed reg=%02x\n", + KBUILD_MODNAME, reg); return -EREMOTEIO; } return 0; @@ -55,33 +47,13 @@ static int qt1010_writereg(struct qt1010_priv *priv, u8 reg, u8 val) .flags = 0, .buf = buf, .len = 2 }; if (i2c_transfer(priv->i2c, &msg, 1) != 1) { - printk(KERN_WARNING "qt1010 I2C write failed\n"); + dev_warn(&priv->i2c->dev, "%s: i2c wr failed reg=%02x\n", + KBUILD_MODNAME, reg); return -EREMOTEIO; } return 0; } -/* dump all registers */ -static void qt1010_dump_regs(struct qt1010_priv *priv) -{ - u8 reg, val; - - for (reg = 0; ; reg++) { - if (reg % 16 == 0) { - if (reg) - printk(KERN_CONT "\n"); - printk(KERN_DEBUG "%02x:", reg); - } - if (qt1010_readreg(priv, reg, &val) == 0) - printk(KERN_CONT " %02x", val); - else - printk(KERN_CONT " --"); - if (reg == 0x2f) - break; - } - printk(KERN_CONT "\n"); -} - static int qt1010_set_params(struct dvb_frontend *fe) { struct dtv_frontend_properties *c = &fe->dtv_property_cache; @@ -229,12 +201,14 @@ static int qt1010_set_params(struct dvb_frontend *fe) /* 00 */ rd[45].val = 0x92; /* TODO: correct value calculation */ - dprintk("freq:%u 05:%02x 07:%02x 09:%02x 0a:%02x 0b:%02x " \ - "1a:%02x 11:%02x 12:%02x 22:%02x 05:%02x 1f:%02x " \ - "20:%02x 25:%02x 00:%02x", \ - freq, rd[2].val, rd[4].val, rd[6].val, rd[7].val, rd[8].val, \ - rd[10].val, rd[13].val, rd[14].val, rd[15].val, rd[35].val, \ - rd[40].val, rd[41].val, rd[43].val, rd[45].val); + dev_dbg(&priv->i2c->dev, + "%s: freq:%u 05:%02x 07:%02x 09:%02x 0a:%02x 0b:%02x " \ + "1a:%02x 11:%02x 12:%02x 22:%02x 05:%02x 1f:%02x " \ + "20:%02x 25:%02x 00:%02x\n", __func__, \ + freq, rd[2].val, rd[4].val, rd[6].val, rd[7].val, \ + rd[8].val, rd[10].val, rd[13].val, rd[14].val, \ + rd[15].val, rd[35].val, rd[40].val, rd[41].val, \ + rd[43].val, rd[45].val); for (i = 0; i < ARRAY_SIZE(rd); i++) { if (rd[i].oper == QT1010_WR) { @@ -245,9 +219,6 @@ static int qt1010_set_params(struct dvb_frontend *fe) if (err) return err; } - if (debug) - qt1010_dump_regs(priv); - if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ @@ -281,14 +252,15 @@ static int qt1010_init_meas1(struct qt1010_priv *priv, val1 = val2; err = qt1010_readreg(priv, reg, &val2); if (err) return err; - dprintk("compare reg:%02x %02x %02x", reg, val1, val2); + dev_dbg(&priv->i2c->dev, "%s: compare reg:%02x %02x %02x\n", + __func__, reg, val1, val2); } while (val1 != val2); *retval = val1; return qt1010_writereg(priv, 0x1e, 0x00); } -static u8 qt1010_init_meas2(struct qt1010_priv *priv, +static int qt1010_init_meas2(struct qt1010_priv *priv, u8 reg_init_val, u8 *retval) { u8 i, val; @@ -395,7 +367,8 @@ static int qt1010_init(struct dvb_frontend *fe) if ((err = qt1010_init_meas2(priv, i, &tmpval))) return err; - c->frequency = 545000000; /* Sigmatek DVB-110 545000000 */ + if (!c->frequency) + c->frequency = 545000000; /* Sigmatek DVB-110 545000000 */ /* MSI Megasky 580 GL861 533000000 */ return qt1010_set_params(fe); } @@ -464,7 +437,10 @@ struct dvb_frontend * qt1010_attach(struct dvb_frontend *fe, if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ - printk(KERN_INFO "Quantek QT1010 successfully identified.\n"); + dev_info(&priv->i2c->dev, + "%s: Quantek QT1010 successfully identified\n", + KBUILD_MODNAME); + memcpy(&fe->ops.tuner_ops, &qt1010_tuner_ops, sizeof(struct dvb_tuner_ops)); diff --git a/drivers/media/common/tuners/qt1010.h b/drivers/media/tuners/qt1010.h similarity index 100% rename from drivers/media/common/tuners/qt1010.h rename to drivers/media/tuners/qt1010.h diff --git a/drivers/media/common/tuners/qt1010_priv.h b/drivers/media/tuners/qt1010_priv.h similarity index 100% rename from drivers/media/common/tuners/qt1010_priv.h rename to drivers/media/tuners/qt1010_priv.h diff --git a/drivers/media/common/tuners/tda18212.c b/drivers/media/tuners/tda18212.c similarity index 91% rename from drivers/media/common/tuners/tda18212.c rename to drivers/media/tuners/tda18212.c index 602c2e392b178c255a2d6fa476b8b2fa439f45d0..5d9f028425012e75ee7edefe97c149fb9f415df6 100644 --- a/drivers/media/common/tuners/tda18212.c +++ b/drivers/media/tuners/tda18212.c @@ -18,8 +18,6 @@ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include "tda18212.h" struct tda18212_priv { @@ -29,16 +27,6 @@ struct tda18212_priv { u32 if_frequency; }; -#define dbg(fmt, arg...) \ -do { \ - if (debug) \ - pr_info("%s: " fmt, __func__, ##arg); \ -} while (0) - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); - /* write multiple registers */ static int tda18212_wr_regs(struct tda18212_priv *priv, u8 reg, u8 *val, int len) @@ -61,8 +49,8 @@ static int tda18212_wr_regs(struct tda18212_priv *priv, u8 reg, u8 *val, if (ret == 1) { ret = 0; } else { - pr_warn("i2c wr failed ret:%d reg:%02x len:%d\n", - ret, reg, len); + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } return ret; @@ -93,8 +81,8 @@ static int tda18212_rd_regs(struct tda18212_priv *priv, u8 reg, u8 *val, memcpy(val, buf, len); ret = 0; } else { - pr_warn("i2c rd failed ret:%d reg:%02x len:%d\n", - ret, reg, len); + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } @@ -157,8 +145,10 @@ static int tda18212_set_params(struct dvb_frontend *fe) [DVBC_8] = { 0x92, 0x53, 0x03 }, }; - dbg("delsys=%d RF=%d BW=%d\n", - c->delivery_system, c->frequency, c->bandwidth_hz); + dev_dbg(&priv->i2c->dev, + "%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n", + __func__, c->delivery_system, c->frequency, + c->bandwidth_hz); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ @@ -247,7 +237,7 @@ static int tda18212_set_params(struct dvb_frontend *fe) return ret; error: - dbg("failed:%d\n", ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); goto exit; } @@ -287,7 +277,7 @@ struct dvb_frontend *tda18212_attach(struct dvb_frontend *fe, { struct tda18212_priv *priv = NULL; int ret; - u8 val; + u8 uninitialized_var(val); priv = kzalloc(sizeof(struct tda18212_priv), GFP_KERNEL); if (priv == NULL) @@ -306,13 +296,16 @@ struct dvb_frontend *tda18212_attach(struct dvb_frontend *fe, if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ - dbg("ret:%d chip ID:%02x\n", ret, val); + dev_dbg(&priv->i2c->dev, "%s: ret=%d chip id=%02x\n", __func__, ret, + val); if (ret || val != 0xc7) { kfree(priv); return NULL; } - pr_info("NXP TDA18212HN successfully identified\n"); + dev_info(&priv->i2c->dev, + "%s: NXP TDA18212HN successfully identified\n", + KBUILD_MODNAME); memcpy(&fe->ops.tuner_ops, &tda18212_tuner_ops, sizeof(struct dvb_tuner_ops)); diff --git a/drivers/media/common/tuners/tda18212.h b/drivers/media/tuners/tda18212.h similarity index 100% rename from drivers/media/common/tuners/tda18212.h rename to drivers/media/tuners/tda18212.h diff --git a/drivers/media/common/tuners/tda18218.c b/drivers/media/tuners/tda18218.c similarity index 87% rename from drivers/media/common/tuners/tda18218.c rename to drivers/media/tuners/tda18218.c index dfb3a831df4540541757f5b6cc0ce7f23f989cd3..18198537be9f45c9f224947643f9884ac22348db 100644 --- a/drivers/media/common/tuners/tda18218.c +++ b/drivers/media/tuners/tda18218.c @@ -18,18 +18,13 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include "tda18218.h" #include "tda18218_priv.h" -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); - /* write multiple registers */ static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len) { - int ret = 0; - u8 buf[1+len], quotient, remainder, i, msg_len, msg_len_max; + int ret = 0, len2, remaining; + u8 buf[1 + len]; struct i2c_msg msg[1] = { { .addr = priv->cfg->i2c_address, @@ -38,17 +33,15 @@ static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len) } }; - msg_len_max = priv->cfg->i2c_wr_max - 1; - quotient = len / msg_len_max; - remainder = len % msg_len_max; - msg_len = msg_len_max; - for (i = 0; (i <= quotient && remainder); i++) { - if (i == quotient) /* set len of the last msg */ - msg_len = remainder; + for (remaining = len; remaining > 0; + remaining -= (priv->cfg->i2c_wr_max - 1)) { + len2 = remaining; + if (len2 > (priv->cfg->i2c_wr_max - 1)) + len2 = (priv->cfg->i2c_wr_max - 1); - msg[0].len = msg_len + 1; - buf[0] = reg + i * msg_len_max; - memcpy(&buf[1], &val[i * msg_len_max], msg_len); + msg[0].len = 1 + len2; + buf[0] = reg + len - remaining; + memcpy(&buf[1], &val[len - remaining], len2); ret = i2c_transfer(priv->i2c, msg, 1); if (ret != 1) @@ -58,7 +51,8 @@ static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len) if (ret == 1) { ret = 0; } else { - warn("i2c wr failed ret:%d reg:%02x len:%d", ret, reg, len); + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } @@ -89,7 +83,8 @@ static int tda18218_rd_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len) memcpy(val, &buf[reg], len); ret = 0; } else { - warn("i2c rd failed ret:%d reg:%02x len:%d", ret, reg, len); + dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \ + "len=%d\n", KBUILD_MODNAME, ret, reg, len); ret = -EREMOTEIO; } @@ -199,7 +194,7 @@ static int tda18218_set_params(struct dvb_frontend *fe) fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ if (ret) - dbg("%s: failed ret:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -208,7 +203,7 @@ static int tda18218_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) { struct tda18218_priv *priv = fe->tuner_priv; *frequency = priv->if_frequency; - dbg("%s: if=%d", __func__, *frequency); + dev_dbg(&priv->i2c->dev, "%s: if_frequency=%d\n", __func__, *frequency); return 0; } @@ -227,7 +222,7 @@ static int tda18218_sleep(struct dvb_frontend *fe) fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ if (ret) - dbg("%s: failed ret:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -248,7 +243,7 @@ static int tda18218_init(struct dvb_frontend *fe) fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ if (ret) - dbg("%s: failed ret:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -282,7 +277,7 @@ struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct tda18218_config *cfg) { struct tda18218_priv *priv = NULL; - u8 val; + u8 uninitialized_var(val); int ret; /* chip default registers values */ static u8 def_regs[] = { @@ -307,13 +302,16 @@ struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe, /* check if the tuner is there */ ret = tda18218_rd_reg(priv, R00_ID, &val); - dbg("%s: ret:%d chip ID:%02x", __func__, ret, val); + dev_dbg(&priv->i2c->dev, "%s: ret=%d chip id=%02x\n", __func__, ret, + val); if (ret || val != def_regs[R00_ID]) { kfree(priv); return NULL; } - info("NXP TDA18218HN successfully identified."); + dev_info(&priv->i2c->dev, + "%s: NXP TDA18218HN successfully identified\n", + KBUILD_MODNAME); memcpy(&fe->ops.tuner_ops, &tda18218_tuner_ops, sizeof(struct dvb_tuner_ops)); @@ -328,7 +326,7 @@ struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe, /* standby */ ret = tda18218_wr_reg(priv, R17_PD1, priv->regs[R17_PD1] | (1 << 0)); if (ret) - dbg("%s: failed ret:%d", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ diff --git a/drivers/media/common/tuners/tda18218.h b/drivers/media/tuners/tda18218.h similarity index 100% rename from drivers/media/common/tuners/tda18218.h rename to drivers/media/tuners/tda18218.h diff --git a/drivers/media/common/tuners/tda18218_priv.h b/drivers/media/tuners/tda18218_priv.h similarity index 90% rename from drivers/media/common/tuners/tda18218_priv.h rename to drivers/media/tuners/tda18218_priv.h index dc52b72e14071015255cb026354d44e4cf248fc6..285b77366c8d0104c17db0c1a24b5c8cd0ff41d3 100644 --- a/drivers/media/common/tuners/tda18218_priv.h +++ b/drivers/media/tuners/tda18218_priv.h @@ -21,18 +21,7 @@ #ifndef TDA18218_PRIV_H #define TDA18218_PRIV_H -#define LOG_PREFIX "tda18218" - -#undef dbg -#define dbg(f, arg...) \ - if (debug) \ - printk(KERN_DEBUG LOG_PREFIX": " f "\n" , ## arg) -#undef err -#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) -#undef info -#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) -#undef warn -#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg) +#include "tda18218.h" #define R00_ID 0x00 /* ID byte */ #define R01_R1 0x01 /* Read byte 1 */ diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/tuners/tda18271-common.c similarity index 99% rename from drivers/media/common/tuners/tda18271-common.c rename to drivers/media/tuners/tda18271-common.c index 39c645787b628fb47f4d9512fa9bf2d1df72cab7..221171eeb0c32ab8d7e34c036abba3e70789e81b 100644 --- a/drivers/media/common/tuners/tda18271-common.c +++ b/drivers/media/tuners/tda18271-common.c @@ -275,7 +275,7 @@ int tda18271_init_regs(struct dvb_frontend *fe) case TDA18271HDC2: regs[R_ID] = 0x84; break; - }; + } regs[R_TM] = 0x08; regs[R_PL] = 0x80; @@ -300,7 +300,7 @@ int tda18271_init_regs(struct dvb_frontend *fe) case TDA18271HDC2: regs[R_EB1] = 0xfc; break; - }; + } regs[R_EB2] = 0x01; regs[R_EB3] = 0x84; @@ -320,7 +320,7 @@ int tda18271_init_regs(struct dvb_frontend *fe) case TDA18271HDC2: regs[R_EB12] = 0x33; break; - }; + } regs[R_EB13] = 0xc1; regs[R_EB14] = 0x00; @@ -335,7 +335,7 @@ int tda18271_init_regs(struct dvb_frontend *fe) case TDA18271HDC2: regs[R_EB18] = 0x8c; break; - }; + } regs[R_EB19] = 0x00; regs[R_EB20] = 0x20; @@ -347,7 +347,7 @@ int tda18271_init_regs(struct dvb_frontend *fe) case TDA18271HDC2: regs[R_EB21] = 0xb3; break; - }; + } regs[R_EB22] = 0x48; regs[R_EB23] = 0xb0; diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/tuners/tda18271-fe.c similarity index 98% rename from drivers/media/common/tuners/tda18271-fe.c rename to drivers/media/tuners/tda18271-fe.c index 2e67f44599045e175ba6f0881bbb56bb6c11c578..72c26fd77922883bf029a2b19d0af2ac52194c8b 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/tuners/tda18271-fe.c @@ -1159,11 +1159,19 @@ static int tda18271_get_id(struct dvb_frontend *fe) struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; char *name; + int ret; mutex_lock(&priv->lock); - tda18271_read_regs(fe); + ret = tda18271_read_regs(fe); mutex_unlock(&priv->lock); + if (ret) { + tda_info("Error reading device ID @ %d-%04x, bailing out.\n", + i2c_adapter_id(priv->i2c_props.adap), + priv->i2c_props.addr); + return -EIO; + } + switch (regs[R_ID] & 0x7f) { case 3: name = "TDA18271HD/C1"; @@ -1278,6 +1286,11 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, if (tda_fail(ret)) goto fail; + /* if delay_cal is set, delay IR & RF calibration until init() + * module option 'cal' overrides this delay */ + if ((cfg->delay_cal) && (!tda18271_need_cal_on_startup(cfg))) + break; + mutex_lock(&priv->lock); tda18271_init_regs(fe); @@ -1285,6 +1298,10 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, (priv->id == TDA18271HDC2)) tda18271c2_rf_cal_init(fe); + /* enter standby mode, with required output features enabled */ + ret = tda18271_toggle_output(fe, 1); + tda_fail(ret); + mutex_unlock(&priv->lock); break; default: diff --git a/drivers/media/common/tuners/tda18271-maps.c b/drivers/media/tuners/tda18271-maps.c similarity index 100% rename from drivers/media/common/tuners/tda18271-maps.c rename to drivers/media/tuners/tda18271-maps.c diff --git a/drivers/media/common/tuners/tda18271-priv.h b/drivers/media/tuners/tda18271-priv.h similarity index 100% rename from drivers/media/common/tuners/tda18271-priv.h rename to drivers/media/tuners/tda18271-priv.h diff --git a/drivers/media/common/tuners/tda18271.h b/drivers/media/tuners/tda18271.h similarity index 95% rename from drivers/media/common/tuners/tda18271.h rename to drivers/media/tuners/tda18271.h index 640bae4e6a5a85c6db5274e9654b1d02f61c419b..89b6c6d93fec75936072b4cdd2a9fd11a376420b 100644 --- a/drivers/media/common/tuners/tda18271.h +++ b/drivers/media/tuners/tda18271.h @@ -105,6 +105,11 @@ struct tda18271_config { /* force rf tracking filter calibration on startup */ unsigned int rf_cal_on_startup:1; + /* prevent any register access during attach(), + * delaying both IR & RF calibration until init() + * module option 'cal' overrides this delay */ + unsigned int delay_cal:1; + /* interface to saa713x / tda829x */ unsigned int config; }; diff --git a/drivers/media/common/tuners/tda827x.c b/drivers/media/tuners/tda827x.c similarity index 100% rename from drivers/media/common/tuners/tda827x.c rename to drivers/media/tuners/tda827x.c diff --git a/drivers/media/common/tuners/tda827x.h b/drivers/media/tuners/tda827x.h similarity index 100% rename from drivers/media/common/tuners/tda827x.h rename to drivers/media/tuners/tda827x.h diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/tuners/tda8290.c similarity index 100% rename from drivers/media/common/tuners/tda8290.c rename to drivers/media/tuners/tda8290.c diff --git a/drivers/media/common/tuners/tda8290.h b/drivers/media/tuners/tda8290.h similarity index 100% rename from drivers/media/common/tuners/tda8290.h rename to drivers/media/tuners/tda8290.h diff --git a/drivers/media/common/tuners/tda9887.c b/drivers/media/tuners/tda9887.c similarity index 100% rename from drivers/media/common/tuners/tda9887.c rename to drivers/media/tuners/tda9887.c diff --git a/drivers/media/common/tuners/tda9887.h b/drivers/media/tuners/tda9887.h similarity index 100% rename from drivers/media/common/tuners/tda9887.h rename to drivers/media/tuners/tda9887.h diff --git a/drivers/media/common/tuners/tea5761.c b/drivers/media/tuners/tea5761.c similarity index 100% rename from drivers/media/common/tuners/tea5761.c rename to drivers/media/tuners/tea5761.c diff --git a/drivers/media/common/tuners/tea5761.h b/drivers/media/tuners/tea5761.h similarity index 100% rename from drivers/media/common/tuners/tea5761.h rename to drivers/media/tuners/tea5761.h diff --git a/drivers/media/common/tuners/tea5767.c b/drivers/media/tuners/tea5767.c similarity index 100% rename from drivers/media/common/tuners/tea5767.c rename to drivers/media/tuners/tea5767.c diff --git a/drivers/media/common/tuners/tea5767.h b/drivers/media/tuners/tea5767.h similarity index 100% rename from drivers/media/common/tuners/tea5767.h rename to drivers/media/tuners/tea5767.h diff --git a/drivers/media/common/tuners/tua9001.c b/drivers/media/tuners/tua9001.c similarity index 65% rename from drivers/media/common/tuners/tua9001.c rename to drivers/media/tuners/tua9001.c index de2607084672f813287a40bb7a916aea5a0403fe..389668474070cb045ceeabbf67c856a0d6980126 100644 --- a/drivers/media/common/tuners/tua9001.c +++ b/drivers/media/tuners/tua9001.c @@ -39,8 +39,8 @@ static int tua9001_wr_reg(struct tua9001_priv *priv, u8 reg, u16 val) if (ret == 1) { ret = 0; } else { - printk(KERN_WARNING "%s: I2C wr failed=%d reg=%02x\n", - __func__, ret, reg); + dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x\n", + KBUILD_MODNAME, ret, reg); ret = -EREMOTEIO; } @@ -49,10 +49,19 @@ static int tua9001_wr_reg(struct tua9001_priv *priv, u8 reg, u16 val) static int tua9001_release(struct dvb_frontend *fe) { + struct tua9001_priv *priv = fe->tuner_priv; + int ret = 0; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + if (fe->callback) + ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, + TUA9001_CMD_CEN, 0); + kfree(fe->tuner_priv); fe->tuner_priv = NULL; - return 0; + return ret; } static int tua9001_init(struct dvb_frontend *fe) @@ -78,20 +87,47 @@ static int tua9001_init(struct dvb_frontend *fe) { 0x34, 0x0a40 }, }; + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + if (fe->callback) { + ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, + TUA9001_CMD_RESETN, 0); + if (ret < 0) + goto err; + } + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c-gate */ for (i = 0; i < ARRAY_SIZE(data); i++) { ret = tua9001_wr_reg(priv, data[i].reg, data[i].val); - if (ret) - break; + if (ret < 0) + goto err_i2c_gate_ctrl; } +err_i2c_gate_ctrl: if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c-gate */ +err: + if (ret < 0) + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int tua9001_sleep(struct dvb_frontend *fe) +{ + struct tua9001_priv *priv = fe->tuner_priv; + int ret = 0; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + + if (fe->callback) + ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, + TUA9001_CMD_RESETN, 1); if (ret < 0) - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -105,9 +141,9 @@ static int tua9001_set_params(struct dvb_frontend *fe) u32 frequency; struct reg_val data[2]; - pr_debug("%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n", - __func__, c->delivery_system, c->frequency, - c->bandwidth_hz); + dev_dbg(&priv->i2c->dev, "%s: delivery_system=%d frequency=%d " \ + "bandwidth_hz=%d\n", __func__, + c->delivery_system, c->frequency, c->bandwidth_hz); switch (c->delivery_system) { case SYS_DVBT: @@ -148,24 +184,42 @@ static int tua9001_set_params(struct dvb_frontend *fe) if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c-gate */ + if (fe->callback) { + ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, + TUA9001_CMD_RXEN, 0); + if (ret < 0) + goto err_i2c_gate_ctrl; + } + for (i = 0; i < ARRAY_SIZE(data); i++) { ret = tua9001_wr_reg(priv, data[i].reg, data[i].val); if (ret < 0) - break; + goto err_i2c_gate_ctrl; + } + + if (fe->callback) { + ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, + TUA9001_CMD_RXEN, 1); + if (ret < 0) + goto err_i2c_gate_ctrl; } +err_i2c_gate_ctrl: if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c-gate */ - err: if (ret < 0) - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int tua9001_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) { + struct tua9001_priv *priv = fe->tuner_priv; + + dev_dbg(&priv->i2c->dev, "%s:\n", __func__); + *frequency = 0; /* Zero-IF */ return 0; @@ -183,6 +237,7 @@ static const struct dvb_tuner_ops tua9001_tuner_ops = { .release = tua9001_release, .init = tua9001_init, + .sleep = tua9001_sleep, .set_params = tua9001_set_params, .get_if_frequency = tua9001_get_if_frequency, @@ -192,6 +247,7 @@ struct dvb_frontend *tua9001_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct tua9001_config *cfg) { struct tua9001_priv *priv = NULL; + int ret; priv = kzalloc(sizeof(struct tua9001_priv), GFP_KERNEL); if (priv == NULL) @@ -200,13 +256,36 @@ struct dvb_frontend *tua9001_attach(struct dvb_frontend *fe, priv->cfg = cfg; priv->i2c = i2c; - printk(KERN_INFO "Infineon TUA 9001 successfully attached."); + if (fe->callback) { + ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, + TUA9001_CMD_CEN, 1); + if (ret < 0) + goto err; + + ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, + TUA9001_CMD_RXEN, 0); + if (ret < 0) + goto err; + + ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, + TUA9001_CMD_RESETN, 1); + if (ret < 0) + goto err; + } + + dev_info(&priv->i2c->dev, + "%s: Infineon TUA 9001 successfully attached\n", + KBUILD_MODNAME); memcpy(&fe->ops.tuner_ops, &tua9001_tuner_ops, sizeof(struct dvb_tuner_ops)); fe->tuner_priv = priv; return fe; +err: + dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); + kfree(priv); + return NULL; } EXPORT_SYMBOL(tua9001_attach); diff --git a/drivers/media/common/tuners/tua9001.h b/drivers/media/tuners/tua9001.h similarity index 78% rename from drivers/media/common/tuners/tua9001.h rename to drivers/media/tuners/tua9001.h index 38d6ae76b1d64a2626826fe8821f23b20d52658f..cf5b815feff999f992bab14fb720080395770ebc 100644 --- a/drivers/media/common/tuners/tua9001.h +++ b/drivers/media/tuners/tua9001.h @@ -30,6 +30,26 @@ struct tua9001_config { u8 i2c_addr; }; +/* + * TUA9001 I/O PINs: + * + * CEN - chip enable + * 0 = chip disabled (chip off) + * 1 = chip enabled (chip on) + * + * RESETN - chip reset + * 0 = reset disabled (chip reset off) + * 1 = reset enabled (chip reset on) + * + * RXEN - RX enable + * 0 = RX disabled (chip idle) + * 1 = RX enabled (chip tuned) + */ + +#define TUA9001_CMD_CEN 0 +#define TUA9001_CMD_RESETN 1 +#define TUA9001_CMD_RXEN 2 + #if defined(CONFIG_MEDIA_TUNER_TUA9001) || \ (defined(CONFIG_MEDIA_TUNER_TUA9001_MODULE) && defined(MODULE)) extern struct dvb_frontend *tua9001_attach(struct dvb_frontend *fe, diff --git a/drivers/media/common/tuners/tua9001_priv.h b/drivers/media/tuners/tua9001_priv.h similarity index 100% rename from drivers/media/common/tuners/tua9001_priv.h rename to drivers/media/tuners/tua9001_priv.h diff --git a/drivers/media/common/tuners/tuner-i2c.h b/drivers/media/tuners/tuner-i2c.h similarity index 100% rename from drivers/media/common/tuners/tuner-i2c.h rename to drivers/media/tuners/tuner-i2c.h diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/tuners/tuner-simple.c similarity index 100% rename from drivers/media/common/tuners/tuner-simple.c rename to drivers/media/tuners/tuner-simple.c diff --git a/drivers/media/common/tuners/tuner-simple.h b/drivers/media/tuners/tuner-simple.h similarity index 100% rename from drivers/media/common/tuners/tuner-simple.h rename to drivers/media/tuners/tuner-simple.h diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/tuners/tuner-types.c similarity index 100% rename from drivers/media/common/tuners/tuner-types.c rename to drivers/media/tuners/tuner-types.c diff --git a/drivers/media/common/tuners/tuner-xc2028-types.h b/drivers/media/tuners/tuner-xc2028-types.h similarity index 100% rename from drivers/media/common/tuners/tuner-xc2028-types.h rename to drivers/media/tuners/tuner-xc2028-types.h diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/tuners/tuner-xc2028.c similarity index 99% rename from drivers/media/common/tuners/tuner-xc2028.c rename to drivers/media/tuners/tuner-xc2028.c index ea0550eafe7d185f9d547a80af33cead4d007050..7bcb6b0ff1dff217bd717c2df46b20fb6e96b932 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/tuners/tuner-xc2028.c @@ -1126,8 +1126,7 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, priv->frequency = freq; - tuner_dbg("divisor= %02x %02x %02x %02x (freq=%d.%03d)\n", - buf[0], buf[1], buf[2], buf[3], + tuner_dbg("divisor= %*ph (freq=%d.%03d)\n", 4, buf, freq / 1000000, (freq % 1000000) / 1000); rc = 0; @@ -1414,8 +1413,8 @@ static int xc2028_set_config(struct dvb_frontend *fe, void *priv_cfg) tuner_err("Failed to request firmware %s\n", priv->fname); priv->state = XC2028_NODEV; - } - priv->state = XC2028_WAITING_FIRMWARE; + } else + priv->state = XC2028_WAITING_FIRMWARE; } mutex_unlock(&priv->lock); diff --git a/drivers/media/common/tuners/tuner-xc2028.h b/drivers/media/tuners/tuner-xc2028.h similarity index 100% rename from drivers/media/common/tuners/tuner-xc2028.h rename to drivers/media/tuners/tuner-xc2028.h diff --git a/drivers/media/common/tuners/xc4000.c b/drivers/media/tuners/xc4000.c similarity index 99% rename from drivers/media/common/tuners/xc4000.c rename to drivers/media/tuners/xc4000.c index 68397110b7d932fec46c3cdd4ecc0b9d2e99ddf4..4937712278f67757ba114a0f5bfbc9227fc00ab6 100644 --- a/drivers/media/common/tuners/xc4000.c +++ b/drivers/media/tuners/xc4000.c @@ -263,8 +263,7 @@ static int xc_send_i2c_data(struct xc4000_priv *priv, u8 *buf, int len) printk(KERN_ERR "xc4000: I2C write failed (len=%i)\n", len); if (len == 4) { - printk(KERN_ERR "bytes %02x %02x %02x %02x\n", buf[0], - buf[1], buf[2], buf[3]); + printk(KERN_ERR "bytes %*ph\n", 4, buf); } return -EREMOTEIO; } diff --git a/drivers/media/common/tuners/xc4000.h b/drivers/media/tuners/xc4000.h similarity index 100% rename from drivers/media/common/tuners/xc4000.h rename to drivers/media/tuners/xc4000.h diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/tuners/xc5000.c similarity index 88% rename from drivers/media/common/tuners/xc5000.c rename to drivers/media/tuners/xc5000.c index 362a8d7c9738e018df797ed7504c215b4595d0de..dc93cf338f366fb3a2200ff0656ca290547f168c 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/tuners/xc5000.c @@ -62,6 +62,9 @@ struct xc5000_priv { u8 radio_input; int chip_id; + u16 pll_register_no; + u8 init_status_supported; + u8 fw_checksum_supported; }; /* Misc Defines */ @@ -111,6 +114,9 @@ struct xc5000_priv { #define XREG_PRODUCT_ID 0x08 #define XREG_BUSY 0x09 #define XREG_BUILD 0x0D +#define XREG_TOTALGAIN 0x0F +#define XREG_FW_CHECKSUM 0x12 +#define XREG_INIT_STATUS 0x13 /* Basic firmware description. This will remain with @@ -208,18 +214,25 @@ static struct XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { struct xc5000_fw_cfg { char *name; u16 size; + u16 pll_reg; + u8 init_status_supported; + u8 fw_checksum_supported; }; #define XC5000A_FIRMWARE "dvb-fe-xc5000-1.6.114.fw" static const struct xc5000_fw_cfg xc5000a_1_6_114 = { .name = XC5000A_FIRMWARE, .size = 12401, + .pll_reg = 0x806c, }; -#define XC5000C_FIRMWARE "dvb-fe-xc5000c-41.024.5.fw" +#define XC5000C_FIRMWARE "dvb-fe-xc5000c-4.1.30.7.fw" static const struct xc5000_fw_cfg xc5000c_41_024_5 = { .name = XC5000C_FIRMWARE, .size = 16497, + .pll_reg = 0x13, + .init_status_supported = 1, + .fw_checksum_supported = 1, }; static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id) @@ -233,7 +246,7 @@ static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id) } } -static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe); +static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force); static int xc5000_is_firmware_loaded(struct dvb_frontend *fe); static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val); static int xc5000_TunerReset(struct dvb_frontend *fe); @@ -342,7 +355,7 @@ static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData) } } } - if (WatchDogTimer < 0) + if (WatchDogTimer <= 0) result = XC_RESULT_I2C_WRITE_FAILURE; return result; @@ -541,6 +554,16 @@ static int xc_get_quality(struct xc5000_priv *priv, u16 *quality) return xc5000_readreg(priv, XREG_QUALITY, quality); } +static int xc_get_analogsnr(struct xc5000_priv *priv, u16 *snr) +{ + return xc5000_readreg(priv, XREG_SNR, snr); +} + +static int xc_get_totalgain(struct xc5000_priv *priv, u16 *totalgain) +{ + return xc5000_readreg(priv, XREG_TOTALGAIN, totalgain); +} + static u16 WaitForLock(struct xc5000_priv *priv) { u16 lockState = 0; @@ -608,6 +631,9 @@ static int xc5000_fwupload(struct dvb_frontend *fe) int ret; const struct xc5000_fw_cfg *desired_fw = xc5000_assign_firmware(priv->chip_id); + priv->pll_register_no = desired_fw->pll_reg; + priv->init_status_supported = desired_fw->init_status_supported; + priv->fw_checksum_supported = desired_fw->fw_checksum_supported; /* request the firmware, this will block and timeout */ printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n", @@ -652,9 +678,12 @@ static void xc_debug_dump(struct xc5000_priv *priv) u32 hsync_freq_hz = 0; u16 frame_lines; u16 quality; + u16 snr; + u16 totalgain; u8 hw_majorversion = 0, hw_minorversion = 0; u8 fw_majorversion = 0, fw_minorversion = 0; u16 fw_buildversion = 0; + u16 regval; /* Wait for stats to stabilize. * Frame Lines needs two frame times after initial lock @@ -675,7 +704,7 @@ static void xc_debug_dump(struct xc5000_priv *priv) xc_get_version(priv, &hw_majorversion, &hw_minorversion, &fw_majorversion, &fw_minorversion); xc_get_buildversion(priv, &fw_buildversion); - dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x.%04x\n", + dprintk(1, "*** HW: V%d.%d, FW: V %d.%d.%d\n", hw_majorversion, hw_minorversion, fw_majorversion, fw_minorversion, fw_buildversion); @@ -686,7 +715,19 @@ static void xc_debug_dump(struct xc5000_priv *priv) dprintk(1, "*** Frame lines = %d\n", frame_lines); xc_get_quality(priv, &quality); - dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality); + dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality & 0x07); + + xc_get_analogsnr(priv, &snr); + dprintk(1, "*** Unweighted analog SNR = %d dB\n", snr & 0x3f); + + xc_get_totalgain(priv, &totalgain); + dprintk(1, "*** Total gain = %d.%d dB\n", totalgain / 256, + (totalgain % 256) * 100 / 256); + + if (priv->pll_register_no) { + xc5000_readreg(priv, priv->pll_register_no, ®val); + dprintk(1, "*** PLL lock status = 0x%04x\n", regval); + } } static int xc5000_set_params(struct dvb_frontend *fe) @@ -697,11 +738,9 @@ static int xc5000_set_params(struct dvb_frontend *fe) u32 freq = fe->dtv_property_cache.frequency; u32 delsys = fe->dtv_property_cache.delivery_system; - if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { - if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) { - dprintk(1, "Unable to load firmware and init tuner\n"); - return -EINVAL; - } + if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) { + dprintk(1, "Unable to load firmware and init tuner\n"); + return -EINVAL; } dprintk(1, "%s() frequency=%d (Hz)\n", __func__, freq); @@ -832,6 +871,7 @@ static int xc5000_set_tv_freq(struct dvb_frontend *fe, struct analog_parameters *params) { struct xc5000_priv *priv = fe->tuner_priv; + u16 pll_lock_status; int ret; dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n", @@ -912,6 +952,21 @@ static int xc5000_set_tv_freq(struct dvb_frontend *fe, if (debug) xc_debug_dump(priv); + if (priv->pll_register_no != 0) { + msleep(20); + xc5000_readreg(priv, priv->pll_register_no, &pll_lock_status); + if (pll_lock_status > 63) { + /* PLL is unlocked, force reload of the firmware */ + dprintk(1, "xc5000: PLL not locked (0x%x). Reloading...\n", + pll_lock_status); + if (xc_load_fw_and_init_tuner(fe, 1) != XC_RESULT_SUCCESS) { + printk(KERN_ERR "xc5000: Unable to reload fw\n"); + return -EREMOTEIO; + } + goto tune_channel; + } + } + return 0; } @@ -982,11 +1037,9 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe, if (priv->i2c_props.adap == NULL) return -EINVAL; - if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { - if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) { - dprintk(1, "Unable to load firmware and init tuner\n"); - return -EINVAL; - } + if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) { + dprintk(1, "Unable to load firmware and init tuner\n"); + return -EINVAL; } switch (params->mode) { @@ -1042,29 +1095,77 @@ static int xc5000_get_status(struct dvb_frontend *fe, u32 *status) return 0; } -static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) +static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force) { struct xc5000_priv *priv = fe->tuner_priv; - int ret = 0; + int ret = XC_RESULT_SUCCESS; + u16 pll_lock_status; + u16 fw_ck; + + if (force || xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { + +fw_retry: - if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { ret = xc5000_fwupload(fe); if (ret != XC_RESULT_SUCCESS) return ret; - } - /* Start the tuner self-calibration process */ - ret |= xc_initialize(priv); + msleep(20); - /* Wait for calibration to complete. - * We could continue but XC5000 will clock stretch subsequent - * I2C transactions until calibration is complete. This way we - * don't have to rely on clock stretching working. - */ - xc_wait(100); + if (priv->fw_checksum_supported) { + if (xc5000_readreg(priv, XREG_FW_CHECKSUM, &fw_ck) + != XC_RESULT_SUCCESS) { + dprintk(1, "%s() FW checksum reading failed.\n", + __func__); + goto fw_retry; + } + + if (fw_ck == 0) { + dprintk(1, "%s() FW checksum failed = 0x%04x\n", + __func__, fw_ck); + goto fw_retry; + } + } + + /* Start the tuner self-calibration process */ + ret |= xc_initialize(priv); - /* Default to "CABLE" mode */ - ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE); + if (ret != XC_RESULT_SUCCESS) + goto fw_retry; + + /* Wait for calibration to complete. + * We could continue but XC5000 will clock stretch subsequent + * I2C transactions until calibration is complete. This way we + * don't have to rely on clock stretching working. + */ + xc_wait(100); + + if (priv->init_status_supported) { + if (xc5000_readreg(priv, XREG_INIT_STATUS, &fw_ck) != XC_RESULT_SUCCESS) { + dprintk(1, "%s() FW failed reading init status.\n", + __func__); + goto fw_retry; + } + + if (fw_ck == 0) { + dprintk(1, "%s() FW init status failed = 0x%04x\n", __func__, fw_ck); + goto fw_retry; + } + } + + if (priv->pll_register_no) { + xc5000_readreg(priv, priv->pll_register_no, + &pll_lock_status); + if (pll_lock_status > 63) { + /* PLL is unlocked, force reload of the firmware */ + printk(KERN_ERR "xc5000: PLL not running after fwload.\n"); + goto fw_retry; + } + } + + /* Default to "CABLE" mode */ + ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE); + } return ret; } @@ -1097,7 +1198,7 @@ static int xc5000_init(struct dvb_frontend *fe) struct xc5000_priv *priv = fe->tuner_priv; dprintk(1, "%s()\n", __func__); - if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) { + if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) { printk(KERN_ERR "xc5000: Unable to initialise tuner\n"); return -EREMOTEIO; } diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/tuners/xc5000.h similarity index 100% rename from drivers/media/common/tuners/xc5000.h rename to drivers/media/tuners/xc5000.h diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..6746994d03fe2fce10cdb9c1b59429919d56c50c --- /dev/null +++ b/drivers/media/usb/Kconfig @@ -0,0 +1,54 @@ +menuconfig MEDIA_USB_SUPPORT + bool "Media USB Adapters" + depends on USB && MEDIA_SUPPORT + help + Enable media drivers for USB bus. + If you have such devices, say Y. + +if MEDIA_USB_SUPPORT + +if MEDIA_CAMERA_SUPPORT + comment "Webcam devices" +source "drivers/media/usb/uvc/Kconfig" +source "drivers/media/usb/gspca/Kconfig" +source "drivers/media/usb/pwc/Kconfig" +source "drivers/media/usb/cpia2/Kconfig" +source "drivers/media/usb/zr364xx/Kconfig" +source "drivers/media/usb/stkwebcam/Kconfig" +source "drivers/media/usb/s2255/Kconfig" +source "drivers/media/usb/sn9c102/Kconfig" +endif + +if MEDIA_ANALOG_TV_SUPPORT + comment "Analog TV USB devices" +source "drivers/media/usb/au0828/Kconfig" +source "drivers/media/usb/pvrusb2/Kconfig" +source "drivers/media/usb/hdpvr/Kconfig" +source "drivers/media/usb/tlg2300/Kconfig" +source "drivers/media/usb/usbvision/Kconfig" +source "drivers/media/usb/stk1160/Kconfig" +endif + +if (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT) + comment "Analog/digital TV USB devices" +source "drivers/media/usb/cx231xx/Kconfig" +source "drivers/media/usb/tm6000/Kconfig" +endif + + +if I2C && MEDIA_DIGITAL_TV_SUPPORT + comment "Digital TV USB devices" +source "drivers/media/usb/dvb-usb/Kconfig" +source "drivers/media/usb/dvb-usb-v2/Kconfig" +source "drivers/media/usb/ttusb-budget/Kconfig" +source "drivers/media/usb/ttusb-dec/Kconfig" +source "drivers/media/usb/siano/Kconfig" +source "drivers/media/usb/b2c2/Kconfig" +endif + +if (MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT) + comment "Webcam, TV (analog/digital) USB devices" +source "drivers/media/usb/em28xx/Kconfig" +endif + +endif #MEDIA_USB_SUPPORT diff --git a/drivers/media/usb/Makefile b/drivers/media/usb/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..7f51d7e5f739432f39b8b98548c8e0f57620dbba --- /dev/null +++ b/drivers/media/usb/Makefile @@ -0,0 +1,22 @@ +# +# Makefile for the USB media device drivers +# + +# DVB USB-only drivers +obj-y += ttusb-dec/ ttusb-budget/ dvb-usb/ dvb-usb-v2/ siano/ b2c2/ +obj-y += zr364xx/ stkwebcam/ s2255/ + +obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ +obj-$(CONFIG_USB_GSPCA) += gspca/ +obj-$(CONFIG_USB_PWC) += pwc/ +obj-$(CONFIG_VIDEO_CPIA2) += cpia2/ +obj-$(CONFIG_USB_SN9C102) += sn9c102/ +obj-$(CONFIG_VIDEO_AU0828) += au0828/ +obj-$(CONFIG_VIDEO_HDPVR) += hdpvr/ +obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/ +obj-$(CONFIG_VIDEO_TLG2300) += tlg2300/ +obj-$(CONFIG_VIDEO_USBVISION) += usbvision/ +obj-$(CONFIG_VIDEO_STK1160) += stk1160/ +obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/ +obj-$(CONFIG_VIDEO_TM6000) += tm6000/ +obj-$(CONFIG_VIDEO_EM28XX) += em28xx/ diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/usb/au0828/Kconfig similarity index 54% rename from drivers/media/video/au0828/Kconfig rename to drivers/media/usb/au0828/Kconfig index 23f7fd22f0eb508ecf5a32f8c3653e3bc51d8ff8..1766c0ce93be3736bd50c6b2991a622961cfa9d0 100644 --- a/drivers/media/video/au0828/Kconfig +++ b/drivers/media/usb/au0828/Kconfig @@ -2,15 +2,14 @@ config VIDEO_AU0828 tristate "Auvitek AU0828 support" depends on I2C && INPUT && DVB_CORE && USB && VIDEO_V4L2 - depends on DVB_CAPTURE_DRIVERS select I2C_ALGOBIT select VIDEO_TVEEPROM select VIDEOBUF_VMALLOC - select DVB_AU8522_DTV if !DVB_FE_CUSTOMISE - select DVB_AU8522_V4L if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE + select DVB_AU8522_DTV if MEDIA_SUBDRV_AUTOSELECT + select DVB_AU8522_V4L if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT ---help--- This is a video4linux driver for Auvitek's USB device. diff --git a/drivers/media/video/au0828/Makefile b/drivers/media/usb/au0828/Makefile similarity index 59% rename from drivers/media/video/au0828/Makefile rename to drivers/media/usb/au0828/Makefile index bd22223f8d9f943a2a94fcf1aab1a4b625192f4d..98cc20cc0ffb2538cd025899e51931f9535715c2 100644 --- a/drivers/media/video/au0828/Makefile +++ b/drivers/media/usb/au0828/Makefile @@ -2,8 +2,8 @@ au0828-objs := au0828-core.o au0828-i2c.o au0828-cards.o au0828-dvb.o au0828-vid obj-$(CONFIG_VIDEO_AU0828) += au0828.o -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -Idrivers/media/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends ccflags-y += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c similarity index 99% rename from drivers/media/video/au0828/au0828-cards.c rename to drivers/media/usb/au0828/au0828-cards.c index e3fe9a6637f66ad446786af6053f084962c42214..448361c6a13eea6e74adefab2ec9d50d448fe7a3 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/usb/au0828/au0828-cards.c @@ -46,7 +46,7 @@ struct au0828_board au0828_boards[] = { .name = "Hauppauge HVR850", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, - .i2c_clk_divider = AU0828_I2C_CLK_30KHZ, + .i2c_clk_divider = AU0828_I2C_CLK_20KHZ, .input = { { .type = AU0828_VMUX_TELEVISION, @@ -77,7 +77,7 @@ struct au0828_board au0828_boards[] = { stretch fits inside of a normal clock cycle, or else the au0828 fails to set the STOP bit. A 30 KHz clock puts the clock pulse width at 18us */ - .i2c_clk_divider = AU0828_I2C_CLK_30KHZ, + .i2c_clk_divider = AU0828_I2C_CLK_20KHZ, .input = { { .type = AU0828_VMUX_TELEVISION, diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/usb/au0828/au0828-cards.h similarity index 100% rename from drivers/media/video/au0828/au0828-cards.h rename to drivers/media/usb/au0828/au0828-cards.h diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/usb/au0828/au0828-core.c similarity index 85% rename from drivers/media/video/au0828/au0828-core.c rename to drivers/media/usb/au0828/au0828-core.c index 1e4ce5068ec2db52ca634f9a90e12ad66f755f6b..745a80a798c8b034f76401c43ce9935b71ce5569 100644 --- a/drivers/media/video/au0828/au0828-core.c +++ b/drivers/media/usb/au0828/au0828-core.c @@ -46,7 +46,7 @@ MODULE_PARM_DESC(disable_usb_speed_check, #define _BULKPIPESIZE 0xffff static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, - u16 index, unsigned char *cp, u16 size); + u16 index); static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value, u16 index, unsigned char *cp, u16 size); @@ -56,41 +56,25 @@ static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value, u32 au0828_readreg(struct au0828_dev *dev, u16 reg) { - recv_control_msg(dev, CMD_REQUEST_IN, 0, reg, dev->ctrlmsg, 1); - dprintk(8, "%s(0x%04x) = 0x%02x\n", __func__, reg, dev->ctrlmsg[0]); - return dev->ctrlmsg[0]; + u8 result = 0; + + recv_control_msg(dev, CMD_REQUEST_IN, 0, reg, &result, 1); + dprintk(8, "%s(0x%04x) = 0x%02x\n", __func__, reg, result); + + return result; } u32 au0828_writereg(struct au0828_dev *dev, u16 reg, u32 val) { dprintk(8, "%s(0x%04x, 0x%02x)\n", __func__, reg, val); - return send_control_msg(dev, CMD_REQUEST_OUT, val, reg, - dev->ctrlmsg, 0); -} - -static void cmd_msg_dump(struct au0828_dev *dev) -{ - int i; - - for (i = 0; i < sizeof(dev->ctrlmsg); i += 16) - dprintk(2, "%s() %02x %02x %02x %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x %02x %02x %02x\n", - __func__, - dev->ctrlmsg[i+0], dev->ctrlmsg[i+1], - dev->ctrlmsg[i+2], dev->ctrlmsg[i+3], - dev->ctrlmsg[i+4], dev->ctrlmsg[i+5], - dev->ctrlmsg[i+6], dev->ctrlmsg[i+7], - dev->ctrlmsg[i+8], dev->ctrlmsg[i+9], - dev->ctrlmsg[i+10], dev->ctrlmsg[i+11], - dev->ctrlmsg[i+12], dev->ctrlmsg[i+13], - dev->ctrlmsg[i+14], dev->ctrlmsg[i+15]); + return send_control_msg(dev, CMD_REQUEST_OUT, val, reg); } static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, - u16 index, unsigned char *cp, u16 size) + u16 index) { int status = -ENODEV; - mutex_lock(&dev->mutex); + if (dev->usbdev) { /* cp must be memory that has been allocated by kmalloc */ @@ -99,8 +83,7 @@ static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, request, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, index, - cp, size, 1000); + value, index, NULL, 0, 1000); status = min(status, 0); @@ -110,7 +93,7 @@ static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, } } - mutex_unlock(&dev->mutex); + return status; } @@ -120,24 +103,23 @@ static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value, int status = -ENODEV; mutex_lock(&dev->mutex); if (dev->usbdev) { - - memset(dev->ctrlmsg, 0, sizeof(dev->ctrlmsg)); - - /* cp must be memory that has been allocated by kmalloc */ status = usb_control_msg(dev->usbdev, usb_rcvctrlpipe(dev->usbdev, 0), request, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, - cp, size, 1000); + dev->ctrlmsg, size, 1000); status = min(status, 0); if (status < 0) { printk(KERN_ERR "%s() Failed receiving control message, error %d.\n", __func__, status); - } else - cmd_msg_dump(dev); + } + + /* the host controller requires heap allocated memory, which + is why we didn't just pass "cp" into usb_control_msg */ + memcpy(cp, dev->ctrlmsg, size); } mutex_unlock(&dev->mutex); return status; @@ -205,6 +187,8 @@ static int au0828_usb_probe(struct usb_interface *interface, return -ENOMEM; } + mutex_init(&dev->lock); + mutex_lock(&dev->lock); mutex_init(&dev->mutex); mutex_init(&dev->dvb.lock); dev->usbdev = usbdev; @@ -215,6 +199,7 @@ static int au0828_usb_probe(struct usb_interface *interface, if (retval) { printk(KERN_ERR "%s() v4l2_device_register failed\n", __func__); + mutex_unlock(&dev->lock); kfree(dev); return -EIO; } @@ -245,6 +230,8 @@ static int au0828_usb_probe(struct usb_interface *interface, printk(KERN_INFO "Registered device AU0828 [%s]\n", dev->board.name == NULL ? "Unset" : dev->board.name); + mutex_unlock(&dev->lock); + return 0; } diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/usb/au0828/au0828-dvb.c similarity index 90% rename from drivers/media/video/au0828/au0828-dvb.c rename to drivers/media/usb/au0828/au0828-dvb.c index 39ece8e2498578d68664d49568ecec26aeb1a616..b328f6550d0b28714ff7339e08844e5491c8b407 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/usb/au0828/au0828-dvb.c @@ -101,11 +101,14 @@ static struct tda18271_config hauppauge_woodbury_tunerconfig = { .gate = TDA18271_GATE_DIGITAL, }; +static void au0828_restart_dvb_streaming(struct work_struct *work); + /*-------------------------------------------------------------------*/ static void urb_completion(struct urb *purb) { struct au0828_dev *dev = purb->context; int ptype = usb_pipetype(purb->pipe); + unsigned char *ptr; dprintk(2, "%s()\n", __func__); @@ -121,6 +124,16 @@ static void urb_completion(struct urb *purb) return; } + /* See if the stream is corrupted (to work around a hardware + bug where the stream gets misaligned */ + ptr = purb->transfer_buffer; + if (purb->actual_length > 0 && ptr[0] != 0x47) { + dprintk(1, "Need to restart streaming %02x len=%d!\n", + ptr[0], purb->actual_length); + schedule_work(&dev->restart_streaming); + return; + } + /* Feed the transport payload into the kernel demux */ dvb_dmx_swfilter_packets(&dev->dvb.demux, purb->transfer_buffer, purb->actual_length / 188); @@ -138,14 +151,13 @@ static int stop_urb_transfer(struct au0828_dev *dev) dprintk(2, "%s()\n", __func__); + dev->urb_streaming = 0; for (i = 0; i < URB_COUNT; i++) { usb_kill_urb(dev->urbs[i]); kfree(dev->urbs[i]->transfer_buffer); usb_free_urb(dev->urbs[i]); } - dev->urb_streaming = 0; - return 0; } @@ -246,11 +258,8 @@ static int au0828_dvb_stop_feed(struct dvb_demux_feed *feed) mutex_lock(&dvb->lock); if (--dvb->feeding == 0) { /* Stop transport */ - au0828_write(dev, 0x608, 0x00); - au0828_write(dev, 0x609, 0x00); - au0828_write(dev, 0x60a, 0x00); - au0828_write(dev, 0x60b, 0x00); ret = stop_urb_transfer(dev); + au0828_write(dev, 0x60b, 0x00); } mutex_unlock(&dvb->lock); } @@ -258,6 +267,37 @@ static int au0828_dvb_stop_feed(struct dvb_demux_feed *feed) return ret; } +static void au0828_restart_dvb_streaming(struct work_struct *work) +{ + struct au0828_dev *dev = container_of(work, struct au0828_dev, + restart_streaming); + struct au0828_dvb *dvb = &dev->dvb; + int ret; + + if (dev->urb_streaming == 0) + return; + + dprintk(1, "Restarting streaming...!\n"); + + mutex_lock(&dvb->lock); + + /* Stop transport */ + ret = stop_urb_transfer(dev); + au0828_write(dev, 0x608, 0x00); + au0828_write(dev, 0x609, 0x00); + au0828_write(dev, 0x60a, 0x00); + au0828_write(dev, 0x60b, 0x00); + + /* Start transport */ + au0828_write(dev, 0x608, 0x90); + au0828_write(dev, 0x609, 0x72); + au0828_write(dev, 0x60a, 0x71); + au0828_write(dev, 0x60b, 0x01); + ret = start_urb_transfer(dev); + + mutex_unlock(&dvb->lock); +} + static int dvb_register(struct au0828_dev *dev) { struct au0828_dvb *dvb = &dev->dvb; @@ -265,6 +305,8 @@ static int dvb_register(struct au0828_dev *dev) dprintk(1, "%s()\n", __func__); + INIT_WORK(&dev->restart_streaming, au0828_restart_dvb_streaming); + /* register adapter */ result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE, &dev->usbdev->dev, adapter_nr); diff --git a/drivers/media/video/au0828/au0828-i2c.c b/drivers/media/usb/au0828/au0828-i2c.c similarity index 93% rename from drivers/media/video/au0828/au0828-i2c.c rename to drivers/media/usb/au0828/au0828-i2c.c index 05c299fa5d79f5c90de3da3eca758ad45f7f2933..4ded17fe195792d53158e7936048213376c40e6b 100644 --- a/drivers/media/video/au0828/au0828-i2c.c +++ b/drivers/media/usb/au0828/au0828-i2c.c @@ -26,15 +26,15 @@ #include #include "au0828.h" - +#include "media/tuner.h" #include static int i2c_scan; module_param(i2c_scan, int, 0444); MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); -#define I2C_WAIT_DELAY 512 -#define I2C_WAIT_RETRY 64 +#define I2C_WAIT_DELAY 25 +#define I2C_WAIT_RETRY 1000 static inline int i2c_slave_did_write_ack(struct i2c_adapter *i2c_adap) { @@ -147,8 +147,19 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, au0828_write(dev, AU0828_I2C_MULTIBYTE_MODE_2FF, 0x01); /* Set the I2C clock */ - au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, - dev->board.i2c_clk_divider); + if (((dev->board.tuner_type == TUNER_XC5000) || + (dev->board.tuner_type == TUNER_XC5000C)) && + (dev->board.tuner_addr == msg->addr) && + (msg->len == 64)) { + /* Hack to speed up firmware load. The xc5000 lets us do up + to 400 KHz when in firmware download mode */ + au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, + AU0828_I2C_CLK_250KHZ); + } else { + /* Use the i2c clock speed in the board configuration */ + au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, + dev->board.i2c_clk_divider); + } /* Hardware needs 8 bit addresses */ au0828_write(dev, AU0828_I2C_DEST_ADDR_203, msg->addr << 1); diff --git a/drivers/media/video/au0828/au0828-reg.h b/drivers/media/usb/au0828/au0828-reg.h similarity index 98% rename from drivers/media/video/au0828/au0828-reg.h rename to drivers/media/usb/au0828/au0828-reg.h index c39f3d2b721e22580b786f6a0a56f96394a1d563..2140f4cfb645679901e71853a940240a64024029 100644 --- a/drivers/media/video/au0828/au0828-reg.h +++ b/drivers/media/usb/au0828/au0828-reg.h @@ -63,3 +63,4 @@ #define AU0828_I2C_CLK_250KHZ 0x07 #define AU0828_I2C_CLK_100KHZ 0x14 #define AU0828_I2C_CLK_30KHZ 0x40 +#define AU0828_I2C_CLK_20KHZ 0x60 diff --git a/drivers/media/video/au0828/au0828-vbi.c b/drivers/media/usb/au0828/au0828-vbi.c similarity index 100% rename from drivers/media/video/au0828/au0828-vbi.c rename to drivers/media/usb/au0828/au0828-vbi.c diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c similarity index 96% rename from drivers/media/video/au0828/au0828-video.c rename to drivers/media/usb/au0828/au0828-video.c index ac3dd733ab815da3ce4345109bee032d6884bbb1..87058557057133f9d209e842c60f000e02f93fba 100644 --- a/drivers/media/video/au0828/au0828-video.c +++ b/drivers/media/usb/au0828/au0828-video.c @@ -864,17 +864,15 @@ static int res_get(struct au0828_fh *fh, unsigned int bit) return 1; /* is it free? */ - mutex_lock(&dev->lock); if (dev->resources & bit) { /* no, someone else uses it */ - mutex_unlock(&dev->lock); return 0; } /* it's free, grab it */ fh->resources |= bit; dev->resources |= bit; dprintk(1, "res: get %d\n", bit); - mutex_unlock(&dev->lock); + return 1; } @@ -894,11 +892,9 @@ static void res_free(struct au0828_fh *fh, unsigned int bits) BUG_ON((fh->resources & bits) != bits); - mutex_lock(&dev->lock); fh->resources &= ~bits; dev->resources &= ~bits; dprintk(1, "res: put %d\n", bits); - mutex_unlock(&dev->lock); } static int get_ressource(struct au0828_fh *fh) @@ -1023,7 +1019,8 @@ static int au0828_v4l2_open(struct file *filp) NULL, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_INTERLACED, - sizeof(struct au0828_buffer), fh, NULL); + sizeof(struct au0828_buffer), fh, + &dev->lock); /* VBI Setup */ dev->vbi_width = 720; @@ -1032,8 +1029,8 @@ static int au0828_v4l2_open(struct file *filp) NULL, &dev->slock, V4L2_BUF_TYPE_VBI_CAPTURE, V4L2_FIELD_SEQ_TB, - sizeof(struct au0828_buffer), fh, NULL); - + sizeof(struct au0828_buffer), fh, + &dev->lock); return ret; } @@ -1312,8 +1309,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, if (rc < 0) return rc; - mutex_lock(&dev->lock); - if (videobuf_queue_is_busy(&fh->vb_vidq)) { printk(KERN_INFO "%s queue busy\n", __func__); rc = -EBUSY; @@ -1322,7 +1317,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, rc = au0828_set_format(dev, VIDIOC_S_FMT, f); out: - mutex_unlock(&dev->lock); return rc; } @@ -1331,11 +1325,19 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * norm) struct au0828_fh *fh = priv; struct au0828_dev *dev = fh->dev; + if (dev->dvb.frontend && dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl) + dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl(dev->dvb.frontend, 1); + /* FIXME: when we support something other than NTSC, we are going to have to make the au0828 bridge adjust the size of its capture buffer, which is currently hardcoded at 720x480 */ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, *norm); + dev->std_set_in_tuner_core = 1; + + if (dev->dvb.frontend && dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl) + dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl(dev->dvb.frontend, 0); + return 0; } @@ -1463,7 +1465,7 @@ static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) return 0; } -static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) +static int vidioc_s_audio(struct file *file, void *priv, const struct v4l2_audio *a) { struct au0828_fh *fh = priv; struct au0828_dev *dev = fh->dev; @@ -1515,9 +1517,18 @@ static int vidioc_s_tuner(struct file *file, void *priv, return -EINVAL; t->type = V4L2_TUNER_ANALOG_TV; + + if (dev->dvb.frontend && dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl) + dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl(dev->dvb.frontend, 1); + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t); + + if (dev->dvb.frontend && dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl) + dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl(dev->dvb.frontend, 0); + dprintk(1, "VIDIOC_S_TUNER: signal = %x, afc = %x\n", t->signal, t->afc); + return 0; } @@ -1546,8 +1557,23 @@ static int vidioc_s_frequency(struct file *file, void *priv, dev->ctrl_freq = freq->frequency; + if (dev->dvb.frontend && dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl) + dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl(dev->dvb.frontend, 1); + + if (dev->std_set_in_tuner_core == 0) { + /* If we've never sent the standard in tuner core, do so now. We + don't do this at device probe because we don't want to incur + the cost of a firmware load */ + v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, + dev->vdev->tvnorms); + dev->std_set_in_tuner_core = 1; + } + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, freq); + if (dev->dvb.frontend && dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl) + dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl(dev->dvb.frontend, 0); + au0828_analog_stream_reset(dev); return 0; @@ -1692,14 +1718,18 @@ static int vidioc_streamoff(struct file *file, void *priv, (AUVI_INPUT(i).audio_setup)(dev, 0); } - videobuf_streamoff(&fh->vb_vidq); - res_free(fh, AU0828_RESOURCE_VIDEO); + if (res_check(fh, AU0828_RESOURCE_VIDEO)) { + videobuf_streamoff(&fh->vb_vidq); + res_free(fh, AU0828_RESOURCE_VIDEO); + } } else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { dev->vbi_timeout_running = 0; del_timer_sync(&dev->vbi_timeout); - videobuf_streamoff(&fh->vb_vbiq); - res_free(fh, AU0828_RESOURCE_VBI); + if (res_check(fh, AU0828_RESOURCE_VBI)) { + videobuf_streamoff(&fh->vb_vbiq); + res_free(fh, AU0828_RESOURCE_VBI); + } } return 0; @@ -1717,8 +1747,12 @@ static int vidioc_g_register(struct file *file, void *priv, v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_register, reg); return 0; default: - return -EINVAL; + if (!v4l2_chip_match_host(®->match)) + return -EINVAL; } + + reg->val = au0828_read(dev, reg->reg); + return 0; } static int vidioc_s_register(struct file *file, void *priv, @@ -1732,9 +1766,10 @@ static int vidioc_s_register(struct file *file, void *priv, v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_register, reg); return 0; default: - return -EINVAL; + if (!v4l2_chip_match_host(®->match)) + return -EINVAL; } - return 0; + return au0828_writereg(dev, reg->reg, reg->val); } #endif @@ -1827,7 +1862,7 @@ static struct v4l2_file_operations au0828_v4l_fops = { .read = au0828_v4l2_read, .poll = au0828_v4l2_poll, .mmap = au0828_v4l2_mmap, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, }; static const struct v4l2_ioctl_ops video_ioctl_ops = { @@ -1917,7 +1952,6 @@ int au0828_analog_register(struct au0828_dev *dev, init_waitqueue_head(&dev->open); spin_lock_init(&dev->slock); - mutex_init(&dev->lock); /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); @@ -1958,11 +1992,13 @@ int au0828_analog_register(struct au0828_dev *dev, /* Fill the video capture device struct */ *dev->vdev = au0828_video_template; dev->vdev->parent = &dev->usbdev->dev; + dev->vdev->lock = &dev->lock; strcpy(dev->vdev->name, "au0828a video"); /* Setup the VBI device */ *dev->vbi_dev = au0828_video_template; dev->vbi_dev->parent = &dev->usbdev->dev; + dev->vbi_dev->lock = &dev->lock; strcpy(dev->vbi_dev->name, "au0828a vbi"); /* Register the v4l2 device */ diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/usb/au0828/au0828.h similarity index 98% rename from drivers/media/video/au0828/au0828.h rename to drivers/media/usb/au0828/au0828.h index 9cde3532182414dc1a72ec265714015453c29fbb..66a56ef7bbe4f4921a9ebc1af6911a293693573f 100644 --- a/drivers/media/video/au0828/au0828.h +++ b/drivers/media/usb/au0828/au0828.h @@ -197,6 +197,7 @@ struct au0828_dev { /* Digital */ struct au0828_dvb dvb; + struct work_struct restart_streaming; /* Analog */ struct v4l2_device v4l2_dev; @@ -224,6 +225,7 @@ struct au0828_dev { unsigned int frame_count; int ctrl_freq; int input_type; + int std_set_in_tuner_core; unsigned int ctrl_input; enum au0828_dev_state dev_state; enum au0828_stream_state stream_state; diff --git a/drivers/media/usb/b2c2/Kconfig b/drivers/media/usb/b2c2/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..17d35833980c5d36a66c95487f64b1fd9d6b59ca --- /dev/null +++ b/drivers/media/usb/b2c2/Kconfig @@ -0,0 +1,15 @@ +config DVB_B2C2_FLEXCOP_USB + tristate "Technisat/B2C2 Air/Sky/Cable2PC USB" + depends on DVB_CORE && I2C + help + Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2, + + Say Y if you own such a device and want to use it. + +config DVB_B2C2_FLEXCOP_USB_DEBUG + bool "Enable debug for the B2C2 FlexCop drivers" + depends on DVB_B2C2_FLEXCOP_USB + select DVB_B2C2_FLEXCOP_DEBUG + help + Say Y if you want to enable the module option to control debug messages + of all B2C2 FlexCop drivers. diff --git a/drivers/media/usb/b2c2/Makefile b/drivers/media/usb/b2c2/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..2778c19a45eb90d0fa640829044f72e94b02bfda --- /dev/null +++ b/drivers/media/usb/b2c2/Makefile @@ -0,0 +1,5 @@ +b2c2-flexcop-usb-objs := flexcop-usb.o +obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o + +ccflags-y += -Idrivers/media/dvb-core/ +ccflags-y += -Idrivers/media/common/b2c2/ diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c similarity index 99% rename from drivers/media/dvb/b2c2/flexcop-usb.c rename to drivers/media/usb/b2c2/flexcop-usb.c index 26c666dd3514a46ecfa98db63f3ee3152ef683f6..8b6275f859088d703fcc2893412dfe5c4ccd58b8 100644 --- a/drivers/media/dvb/b2c2/flexcop-usb.c +++ b/drivers/media/usb/b2c2/flexcop-usb.c @@ -324,10 +324,7 @@ static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb, flexcop_pass_dmx_packets( fc_usb->fc_dev, b+2, 1); else - deb_ts( - "not ts packet %02x %02x %02x %02x \n", - *(b+2), *(b+3), - *(b+4), *(b+5)); + deb_ts("not ts packet %*ph\n", 4, b+2); b += 190; l -= 190; break; diff --git a/drivers/media/dvb/b2c2/flexcop-usb.h b/drivers/media/usb/b2c2/flexcop-usb.h similarity index 100% rename from drivers/media/dvb/b2c2/flexcop-usb.h rename to drivers/media/usb/b2c2/flexcop-usb.h diff --git a/drivers/media/video/cpia2/Kconfig b/drivers/media/usb/cpia2/Kconfig similarity index 100% rename from drivers/media/video/cpia2/Kconfig rename to drivers/media/usb/cpia2/Kconfig diff --git a/drivers/media/video/cpia2/Makefile b/drivers/media/usb/cpia2/Makefile similarity index 100% rename from drivers/media/video/cpia2/Makefile rename to drivers/media/usb/cpia2/Makefile diff --git a/drivers/media/video/cpia2/cpia2.h b/drivers/media/usb/cpia2/cpia2.h similarity index 100% rename from drivers/media/video/cpia2/cpia2.h rename to drivers/media/usb/cpia2/cpia2.h diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/usb/cpia2/cpia2_core.c similarity index 99% rename from drivers/media/video/cpia2/cpia2_core.c rename to drivers/media/usb/cpia2/cpia2_core.c index 17188e234770fa8170502ab25d87959cc9b9c959..187012ce444bd2aef05235335c32e8302b3d3727 100644 --- a/drivers/media/video/cpia2/cpia2_core.c +++ b/drivers/media/usb/cpia2/cpia2_core.c @@ -31,11 +31,15 @@ #include "cpia2.h" +#include #include #include #include #include +#define FIRMWARE "cpia2/stv0672_vp4.bin" +MODULE_FIRMWARE(FIRMWARE); + /* #define _CPIA2_DEBUG_ */ #ifdef _CPIA2_DEBUG_ @@ -898,7 +902,7 @@ static int cpia2_send_onebyte_command(struct camera_data *cam, static int apply_vp_patch(struct camera_data *cam) { const struct firmware *fw; - const char fw_name[] = "cpia2/stv0672_vp4.bin"; + const char fw_name[] = FIRMWARE; int i, ret; struct cpia2_command cmd; diff --git a/drivers/media/video/cpia2/cpia2_registers.h b/drivers/media/usb/cpia2/cpia2_registers.h similarity index 100% rename from drivers/media/video/cpia2/cpia2_registers.h rename to drivers/media/usb/cpia2/cpia2_registers.h diff --git a/drivers/media/video/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c similarity index 100% rename from drivers/media/video/cpia2/cpia2_usb.c rename to drivers/media/usb/cpia2/cpia2_usb.c diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/usb/cpia2/cpia2_v4l.c similarity index 97% rename from drivers/media/video/cpia2/cpia2_v4l.c rename to drivers/media/usb/cpia2/cpia2_v4l.c index a62a7b739991806567231870dc143ceb3cac675a..aeb9d227572583e077a134e6133d9766793cc215 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/usb/cpia2/cpia2_v4l.c @@ -84,21 +84,26 @@ MODULE_VERSION(CPIA_VERSION); static int cpia2_open(struct file *file) { struct camera_data *cam = video_drvdata(file); - int retval = v4l2_fh_open(file); + int retval; + if (mutex_lock_interruptible(&cam->v4l2_lock)) + return -ERESTARTSYS; + retval = v4l2_fh_open(file); if (retval) - return retval; + goto open_unlock; if (v4l2_fh_is_singular_file(file)) { if (cpia2_allocate_buffers(cam)) { v4l2_fh_release(file); - return -ENOMEM; + retval = -ENOMEM; + goto open_unlock; } /* reset the camera */ if (cpia2_reset_camera(cam) < 0) { v4l2_fh_release(file); - return -EIO; + retval = -EIO; + goto open_unlock; } cam->APP_len = 0; @@ -106,7 +111,9 @@ static int cpia2_open(struct file *file) } cpia2_dbg_dump_registers(cam); - return 0; +open_unlock: + mutex_unlock(&cam->v4l2_lock); + return retval; } /****************************************************************************** @@ -119,6 +126,7 @@ static int cpia2_close(struct file *file) struct video_device *dev = video_devdata(file); struct camera_data *cam = video_get_drvdata(dev); + mutex_lock(&cam->v4l2_lock); if (video_is_registered(&cam->vdev) && v4l2_fh_is_singular_file(file)) { cpia2_usb_stream_stop(cam); @@ -133,6 +141,7 @@ static int cpia2_close(struct file *file) cam->stream_fh = NULL; cam->mmapped = 0; } + mutex_unlock(&cam->v4l2_lock); return v4l2_fh_release(file); } @@ -146,11 +155,16 @@ static ssize_t cpia2_v4l_read(struct file *file, char __user *buf, size_t count, { struct camera_data *cam = video_drvdata(file); int noblock = file->f_flags&O_NONBLOCK; + ssize_t ret; if(!cam) return -EINVAL; - return cpia2_read(cam, buf, count, noblock); + if (mutex_lock_interruptible(&cam->v4l2_lock)) + return -ERESTARTSYS; + ret = cpia2_read(cam, buf, count, noblock); + mutex_unlock(&cam->v4l2_lock); + return ret; } @@ -162,8 +176,12 @@ static ssize_t cpia2_v4l_read(struct file *file, char __user *buf, size_t count, static unsigned int cpia2_v4l_poll(struct file *filp, struct poll_table_struct *wait) { struct camera_data *cam = video_drvdata(filp); + unsigned int res; - return cpia2_poll(cam, filp, wait); + mutex_lock(&cam->v4l2_lock); + res = cpia2_poll(cam, filp, wait); + mutex_unlock(&cam->v4l2_lock); + return res; } @@ -716,7 +734,8 @@ static int cpia2_g_jpegcomp(struct file *file, void *fh, struct v4l2_jpegcompres * *****************************************************************************/ -static int cpia2_s_jpegcomp(struct file *file, void *fh, struct v4l2_jpegcompression *parms) +static int cpia2_s_jpegcomp(struct file *file, void *fh, + const struct v4l2_jpegcompression *parms) { struct camera_data *cam = video_drvdata(file); @@ -725,8 +744,6 @@ static int cpia2_s_jpegcomp(struct file *file, void *fh, struct v4l2_jpegcompres cam->params.compression.inhibit_htables = !(parms->jpeg_markers & V4L2_JPEG_MARKER_DHT); - parms->jpeg_markers &= V4L2_JPEG_MARKER_DQT | V4L2_JPEG_MARKER_DRI | - V4L2_JPEG_MARKER_DHT; if(parms->APP_len != 0) { if(parms->APP_len > 0 && @@ -987,10 +1004,13 @@ static int cpia2_mmap(struct file *file, struct vm_area_struct *area) struct camera_data *cam = video_drvdata(file); int retval; + if (mutex_lock_interruptible(&cam->v4l2_lock)) + return -ERESTARTSYS; retval = cpia2_remap_buffer(cam, area); if(!retval) cam->stream_fh = file->private_data; + mutex_unlock(&cam->v4l2_lock); return retval; } @@ -1147,10 +1167,6 @@ int cpia2_register_camera(struct camera_data *cam) cam->vdev.ctrl_handler = hdl; cam->vdev.v4l2_dev = &cam->v4l2_dev; set_bit(V4L2_FL_USE_FH_PRIO, &cam->vdev.flags); - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &cam->vdev.flags); reset_camera_struct_v4l(cam); diff --git a/drivers/media/video/cx231xx/Kconfig b/drivers/media/usb/cx231xx/Kconfig similarity index 86% rename from drivers/media/video/cx231xx/Kconfig rename to drivers/media/usb/cx231xx/Kconfig index 446f692aabb740e175326f4017b925517f2ab52c..86feeeaf61c24a458df51f40ad2d3629901437e9 100644 --- a/drivers/media/video/cx231xx/Kconfig +++ b/drivers/media/usb/cx231xx/Kconfig @@ -40,11 +40,11 @@ config VIDEO_CX231XX_ALSA config VIDEO_CX231XX_DVB tristate "DVB/ATSC Support for Cx231xx based TV cards" - depends on VIDEO_CX231XX && DVB_CORE && DVB_CAPTURE_DRIVERS + depends on VIDEO_CX231XX && DVB_CORE select VIDEOBUF_DVB - select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE - select DVB_MB86A20S if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT ---help--- This adds support for DVB cards based on the diff --git a/drivers/media/video/cx231xx/Makefile b/drivers/media/usb/cx231xx/Makefile similarity index 65% rename from drivers/media/video/cx231xx/Makefile rename to drivers/media/usb/cx231xx/Makefile index b3348975c7c2039df3b72fc184ec9a3a43555665..52cf76935e69b02a666d5535d6f3fc23d5b759df 100644 --- a/drivers/media/video/cx231xx/Makefile +++ b/drivers/media/usb/cx231xx/Makefile @@ -8,9 +8,8 @@ obj-$(CONFIG_VIDEO_CX231XX) += cx231xx.o obj-$(CONFIG_VIDEO_CX231XX_ALSA) += cx231xx-alsa.o obj-$(CONFIG_VIDEO_CX231XX_DVB) += cx231xx-dvb.o -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends -ccflags-y += -Idrivers/media/dvb/dvb-usb - +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends +ccflags-y += -Idrivers/media/usb/dvb-usb diff --git a/drivers/media/video/cx231xx/cx231xx-417.c b/drivers/media/usb/cx231xx/cx231xx-417.c similarity index 99% rename from drivers/media/video/cx231xx/cx231xx-417.c rename to drivers/media/usb/cx231xx/cx231xx-417.c index ce2f62238a19d8ae6fabf4df49532db7da0779c4..b024e5197a755fa01cc36fff2be2c7be1a876740 100644 --- a/drivers/media/video/cx231xx/cx231xx-417.c +++ b/drivers/media/usb/cx231xx/cx231xx-417.c @@ -2193,3 +2193,5 @@ int cx231xx_417_register(struct cx231xx *dev) return 0; } + +MODULE_FIRMWARE(CX231xx_FIRM_IMAGE_NAME); diff --git a/drivers/media/video/cx231xx/cx231xx-audio.c b/drivers/media/usb/cx231xx/cx231xx-audio.c similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-audio.c rename to drivers/media/usb/cx231xx/cx231xx-audio.c diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-avcore.c rename to drivers/media/usb/cx231xx/cx231xx-avcore.c diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-cards.c rename to drivers/media/usb/cx231xx/cx231xx-cards.c diff --git a/drivers/media/video/cx231xx/cx231xx-conf-reg.h b/drivers/media/usb/cx231xx/cx231xx-conf-reg.h similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-conf-reg.h rename to drivers/media/usb/cx231xx/cx231xx-conf-reg.h diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-core.c rename to drivers/media/usb/cx231xx/cx231xx-core.c diff --git a/drivers/media/video/cx231xx/cx231xx-dif.h b/drivers/media/usb/cx231xx/cx231xx-dif.h similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-dif.h rename to drivers/media/usb/cx231xx/cx231xx-dif.h diff --git a/drivers/media/video/cx231xx/cx231xx-dvb.c b/drivers/media/usb/cx231xx/cx231xx-dvb.c similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-dvb.c rename to drivers/media/usb/cx231xx/cx231xx-dvb.c diff --git a/drivers/media/video/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-i2c.c rename to drivers/media/usb/cx231xx/cx231xx-i2c.c diff --git a/drivers/media/video/cx231xx/cx231xx-input.c b/drivers/media/usb/cx231xx/cx231xx-input.c similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-input.c rename to drivers/media/usb/cx231xx/cx231xx-input.c diff --git a/drivers/media/video/cx231xx/cx231xx-pcb-cfg.c b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-pcb-cfg.c rename to drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c diff --git a/drivers/media/video/cx231xx/cx231xx-pcb-cfg.h b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-pcb-cfg.h rename to drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h diff --git a/drivers/media/video/cx231xx/cx231xx-reg.h b/drivers/media/usb/cx231xx/cx231xx-reg.h similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-reg.h rename to drivers/media/usb/cx231xx/cx231xx-reg.h diff --git a/drivers/media/video/cx231xx/cx231xx-vbi.c b/drivers/media/usb/cx231xx/cx231xx-vbi.c similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-vbi.c rename to drivers/media/usb/cx231xx/cx231xx-vbi.c diff --git a/drivers/media/video/cx231xx/cx231xx-vbi.h b/drivers/media/usb/cx231xx/cx231xx-vbi.h similarity index 100% rename from drivers/media/video/cx231xx/cx231xx-vbi.h rename to drivers/media/usb/cx231xx/cx231xx-vbi.h diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c similarity index 98% rename from drivers/media/video/cx231xx/cx231xx-video.c rename to drivers/media/usb/cx231xx/cx231xx-video.c index 523aa49d6b868e5f0c68b2345e374cb5ddd45a5c..fedf7852a355c8e2fff3575769b0237c3fa33105 100644 --- a/drivers/media/video/cx231xx/cx231xx-video.c +++ b/drivers/media/usb/cx231xx/cx231xx-video.c @@ -1253,7 +1253,7 @@ static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) return 0; } -static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) +static int vidioc_s_audio(struct file *file, void *priv, const struct v4l2_audio *a) { struct cx231xx_fh *fh = priv; struct cx231xx *dev = fh->dev; @@ -2096,7 +2096,7 @@ static int radio_s_tuner(struct file *file, void *priv, struct v4l2_tuner *t) return 0; } -static int radio_s_audio(struct file *file, void *fh, struct v4l2_audio *a) +static int radio_s_audio(struct file *file, void *fh, const struct v4l2_audio *a) { return 0; } @@ -2168,6 +2168,10 @@ static int cx231xx_v4l2_open(struct file *filp) cx231xx_errdev("cx231xx-video.c: Out of memory?!\n"); return -ENOMEM; } + if (mutex_lock_interruptible(&dev->lock)) { + kfree(fh); + return -ERESTARTSYS; + } fh->dev = dev; fh->radio = radio; fh->type = fh_type; @@ -2226,6 +2230,7 @@ static int cx231xx_v4l2_open(struct file *filp) sizeof(struct cx231xx_buffer), fh, &dev->lock); } + mutex_unlock(&dev->lock); return errCode; } @@ -2272,11 +2277,11 @@ void cx231xx_release_analog_resources(struct cx231xx *dev) } /* - * cx231xx_v4l2_close() + * cx231xx_close() * stops streaming and deallocates all resources allocated by the v4l2 * calls and ioctls */ -static int cx231xx_v4l2_close(struct file *filp) +static int cx231xx_close(struct file *filp) { struct cx231xx_fh *fh = filp->private_data; struct cx231xx *dev = fh->dev; @@ -2355,6 +2360,18 @@ static int cx231xx_v4l2_close(struct file *filp) return 0; } +static int cx231xx_v4l2_close(struct file *filp) +{ + struct cx231xx_fh *fh = filp->private_data; + struct cx231xx *dev = fh->dev; + int rc; + + mutex_lock(&dev->lock); + rc = cx231xx_close(filp); + mutex_unlock(&dev->lock); + return rc; +} + /* * cx231xx_v4l2_read() * will allocate buffers when called for the first time @@ -2378,8 +2395,12 @@ cx231xx_v4l2_read(struct file *filp, char __user *buf, size_t count, if (unlikely(rc < 0)) return rc; - return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0, + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + rc = videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0, filp->f_flags & O_NONBLOCK); + mutex_unlock(&dev->lock); + return rc; } return 0; } @@ -2404,10 +2425,15 @@ static unsigned int cx231xx_v4l2_poll(struct file *filp, poll_table *wait) return POLLERR; if ((V4L2_BUF_TYPE_VIDEO_CAPTURE == fh->type) || - (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type)) - return videobuf_poll_stream(filp, &fh->vb_vidq, wait); - else - return POLLERR; + (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type)) { + unsigned int res; + + mutex_lock(&dev->lock); + res = videobuf_poll_stream(filp, &fh->vb_vidq, wait); + mutex_unlock(&dev->lock); + return res; + } + return POLLERR; } /* @@ -2428,7 +2454,10 @@ static int cx231xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) if (unlikely(rc < 0)) return rc; + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; rc = videobuf_mmap_mapper(&fh->vb_vidq, vma); + mutex_unlock(&dev->lock); cx231xx_videodbg("vma start=0x%08lx, size=%ld, ret=%d\n", (unsigned long)vma->vm_start, @@ -2545,10 +2574,6 @@ static struct video_device *cx231xx_vdev_init(struct cx231xx *dev, vfd->release = video_device_release; vfd->debug = video_debug; vfd->lock = &dev->lock; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vfd->flags); snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name); diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h similarity index 100% rename from drivers/media/video/cx231xx/cx231xx.h rename to drivers/media/usb/cx231xx/cx231xx.h diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..834bfecbed73d59e11d6baf5d7a1c04816f6f7fb --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/Kconfig @@ -0,0 +1,149 @@ +config DVB_USB_V2 + tristate "Support for various USB DVB devices v2" + depends on DVB_CORE && USB && I2C && RC_CORE + help + By enabling this you will be able to choose the various supported + USB1.1 and USB2.0 DVB devices. + + Almost every USB device needs a firmware, please look into + . + + For a complete list of supported USB devices see the LinuxTV DVB Wiki: + + + Say Y if you own a USB DVB device. + +config DVB_USB_CYPRESS_FIRMWARE + tristate "Cypress firmware helper routines" + depends on DVB_USB_V2 + +config DVB_USB_AF9015 + tristate "Afatech AF9015 DVB-T USB2.0 support" + depends on DVB_USB_V2 + select DVB_AF9013 + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MC44S803 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver + +config DVB_USB_AF9035 + tristate "Afatech AF9035 DVB-T USB2.0 support" + depends on DVB_USB_V2 + select DVB_AF9033 + select MEDIA_TUNER_TUA9001 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_FC0011 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Afatech AF9035 based DVB USB receiver. + +config DVB_USB_ANYSEE + tristate "Anysee DVB-T/C USB2.0 support" + depends on DVB_USB_V2 + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18212 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CXD2820R if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Anysee E30, Anysee E30 Plus or + Anysee E30 C Plus DVB USB2.0 receiver. + +config DVB_USB_AU6610 + tristate "Alcor Micro AU6610 USB2.0 support" + depends on DVB_USB_V2 + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver. + +config DVB_USB_AZ6007 + tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support" + depends on DVB_USB_V2 + select DVB_USB_CYPRESS_FIRMWARE + select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the AZ6007 receivers like Terratec H7. + +config DVB_USB_CE6230 + tristate "Intel CE6230 DVB-T USB2.0 support" + depends on DVB_USB_V2 + select DVB_ZL10353 + select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver + +config DVB_USB_EC168 + tristate "E3C EC168 DVB-T USB2.0 support" + depends on DVB_USB_V2 + select DVB_EC100 + select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the E3C EC168 DVB-T USB2.0 receiver. + +config DVB_USB_GL861 + tristate "Genesys Logic GL861 USB2.0 support" + depends on DVB_USB_V2 + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 + receiver with USB ID 0db0:5581. + +config DVB_USB_IT913X + tristate "ITE IT913X DVB-T USB2.0 support" + depends on DVB_USB_V2 + select DVB_IT913X_FE + help + Say Y here to support the ITE IT913X DVB-T USB2.0 + +config DVB_USB_LME2510 + tristate "LME DM04/QQBOX DVB-S USB2.0 support" + depends on DVB_USB_V2 + select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT + select DVB_IX2505V if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_M88RS2000 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 + +config DVB_USB_MXL111SF + tristate "MxL111SF DTV USB2.0 support" + depends on DVB_USB_V2 + select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LG2160 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_TVEEPROM + help + Say Y here to support the MxL111SF USB2.0 DTV receiver. + +config DVB_USB_RTL28XXU + tristate "Realtek RTL28xxU DVB USB support" + depends on DVB_USB_V2 && EXPERIMENTAL + select DVB_RTL2830 + select DVB_RTL2832 + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_FC0012 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_FC0013 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_E4000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Realtek RTL28xxU DVB USB receiver. + diff --git a/drivers/media/usb/dvb-usb-v2/Makefile b/drivers/media/usb/dvb-usb-v2/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..b76f58e6c64ff833b1be163c67fe645390b31e73 --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/Makefile @@ -0,0 +1,49 @@ +dvb_usb_v2-objs := dvb_usb_core.o dvb_usb_urb.o usb_urb.o +obj-$(CONFIG_DVB_USB_V2) += dvb_usb_v2.o + +dvb_usb_cypress_firmware-objs := cypress_firmware.o +obj-$(CONFIG_DVB_USB_CYPRESS_FIRMWARE) += dvb_usb_cypress_firmware.o + +dvb-usb-af9015-objs := af9015.o +obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o + +dvb-usb-af9035-objs := af9035.o +obj-$(CONFIG_DVB_USB_AF9035) += dvb-usb-af9035.o + +dvb-usb-anysee-objs := anysee.o +obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o + +dvb-usb-au6610-objs := au6610.o +obj-$(CONFIG_DVB_USB_AU6610) += dvb-usb-au6610.o + +dvb-usb-az6007-objs := az6007.o +obj-$(CONFIG_DVB_USB_AZ6007) += dvb-usb-az6007.o + +dvb-usb-ce6230-objs := ce6230.o +obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o + +dvb-usb-ec168-objs := ec168.o +obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o + +dvb-usb-it913x-objs := it913x.o +obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o + +dvb-usb-lmedm04-objs := lmedm04.o +obj-$(CONFIG_DVB_USB_LME2510) += dvb-usb-lmedm04.o + +dvb-usb-gl861-objs := gl861.o +obj-$(CONFIG_DVB_USB_GL861) += dvb-usb-gl861.o + +dvb-usb-mxl111sf-objs += mxl111sf.o mxl111sf-phy.o mxl111sf-i2c.o +dvb-usb-mxl111sf-objs += mxl111sf-gpio.o +obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o +obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o +obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o + +dvb-usb-rtl28xxu-objs := rtl28xxu.o +obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o + +ccflags-y += -I$(srctree)/drivers/media/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb-frontends +ccflags-y += -I$(srctree)/drivers/media/tuners + diff --git a/drivers/media/usb/dvb-usb-v2/af9015.c b/drivers/media/usb/dvb-usb-v2/af9015.c new file mode 100644 index 0000000000000000000000000000000000000000..824f1911ee21bcdcf3282ef33ffece13a1f3b654 --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/af9015.c @@ -0,0 +1,1454 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "af9015.h" + +static int dvb_usb_af9015_remote; +module_param_named(remote, dvb_usb_af9015_remote, int, 0644); +MODULE_PARM_DESC(remote, "select remote"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) +{ +#define BUF_LEN 63 +#define REQ_HDR_LEN 8 /* send header size */ +#define ACK_HDR_LEN 2 /* rece header size */ + struct af9015_state *state = d_to_priv(d); + int ret, wlen, rlen; + u8 buf[BUF_LEN]; + u8 write = 1; + + buf[0] = req->cmd; + buf[1] = state->seq++; + buf[2] = req->i2c_addr; + buf[3] = req->addr >> 8; + buf[4] = req->addr & 0xff; + buf[5] = req->mbox; + buf[6] = req->addr_len; + buf[7] = req->data_len; + + switch (req->cmd) { + case GET_CONFIG: + case READ_MEMORY: + case RECONNECT_USB: + write = 0; + break; + case READ_I2C: + write = 0; + buf[2] |= 0x01; /* set I2C direction */ + case WRITE_I2C: + buf[0] = READ_WRITE_I2C; + break; + case WRITE_MEMORY: + if (((req->addr & 0xff00) == 0xff00) || + ((req->addr & 0xff00) == 0xae00)) + buf[0] = WRITE_VIRTUAL_MEMORY; + case WRITE_VIRTUAL_MEMORY: + case COPY_FIRMWARE: + case DOWNLOAD_FIRMWARE: + case BOOT: + break; + default: + dev_err(&d->udev->dev, "%s: unknown command=%d\n", + KBUILD_MODNAME, req->cmd); + ret = -EIO; + goto error; + } + + /* buffer overflow check */ + if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) || + (!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) { + dev_err(&d->udev->dev, "%s: too much data; cmd=%d len=%d\n", + KBUILD_MODNAME, req->cmd, req->data_len); + ret = -EINVAL; + goto error; + } + + /* write receives seq + status = 2 bytes + read receives seq + status + data = 2 + N bytes */ + wlen = REQ_HDR_LEN; + rlen = ACK_HDR_LEN; + if (write) { + wlen += req->data_len; + memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len); + } else { + rlen += req->data_len; + } + + /* no ack for these packets */ + if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB) + rlen = 0; + + ret = dvb_usbv2_generic_rw(d, buf, wlen, buf, rlen); + if (ret) + goto error; + + /* check status */ + if (rlen && buf[1]) { + dev_err(&d->udev->dev, "%s: command failed=%d\n", + KBUILD_MODNAME, buf[1]); + ret = -EIO; + goto error; + } + + /* read request, copy returned data to return buf */ + if (!write) + memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len); +error: + return ret; +} + +static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val, + u8 len) +{ + struct req_t req = {WRITE_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, + val}; + return af9015_ctrl_msg(d, &req); +} + +static int af9015_read_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len) +{ + struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, + val}; + return af9015_ctrl_msg(d, &req); +} + +static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val) +{ + return af9015_write_regs(d, addr, &val, 1); +} + +static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val) +{ + return af9015_read_regs(d, addr, val, 1); +} + +static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, + u8 val) +{ + struct af9015_state *state = d_to_priv(d); + struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val}; + + if (addr == state->af9013_config[0].i2c_addr || + addr == state->af9013_config[1].i2c_addr) + req.addr_len = 3; + + return af9015_ctrl_msg(d, &req); +} + +static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, + u8 *val) +{ + struct af9015_state *state = d_to_priv(d); + struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val}; + + if (addr == state->af9013_config[0].i2c_addr || + addr == state->af9013_config[1].i2c_addr) + req.addr_len = 3; + + return af9015_ctrl_msg(d, &req); +} + +static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op) +{ + int ret; + u8 val, mask = 0x01; + + ret = af9015_read_reg(d, addr, &val); + if (ret) + return ret; + + mask <<= bit; + if (op) { + /* set bit */ + val |= mask; + } else { + /* clear bit */ + mask ^= 0xff; + val &= mask; + } + + return af9015_write_reg(d, addr, val); +} + +static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +{ + return af9015_do_reg_bit(d, addr, bit, 1); +} + +static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +{ + return af9015_do_reg_bit(d, addr, bit, 0); +} + +static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct af9015_state *state = d_to_priv(d); + int ret = 0, i = 0; + u16 addr; + u8 uninitialized_var(mbox), addr_len; + struct req_t req; + +/* +The bus lock is needed because there is two tuners both using same I2C-address. +Due to that the only way to select correct tuner is use demodulator I2C-gate. + +................................................ +. AF9015 includes integrated AF9013 demodulator. +. ____________ ____________ . ____________ +.| uC | | demod | . | tuner | +.|------------| |------------| . |------------| +.| AF9015 | | AF9013/5 | . | MXL5003 | +.| |--+----I2C-------|-----/ -----|-.-----I2C-------| | +.| | | | addr 0x38 | . | addr 0xc6 | +.|____________| | |____________| . |____________| +.................|.............................. + | ____________ ____________ + | | demod | | tuner | + | |------------| |------------| + | | AF9013 | | MXL5003 | + +----I2C-------|-----/ -----|-------I2C-------| | + | addr 0x3a | | addr 0xc6 | + |____________| |____________| +*/ + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + while (i < num) { + if (msg[i].addr == state->af9013_config[0].i2c_addr || + msg[i].addr == state->af9013_config[1].i2c_addr) { + addr = msg[i].buf[0] << 8; + addr += msg[i].buf[1]; + mbox = msg[i].buf[2]; + addr_len = 3; + } else { + addr = msg[i].buf[0]; + addr_len = 1; + /* mbox is don't care in that case */ + } + + if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { + if (msg[i].len > 3 || msg[i+1].len > 61) { + ret = -EOPNOTSUPP; + goto error; + } + if (msg[i].addr == state->af9013_config[0].i2c_addr) + req.cmd = READ_MEMORY; + else + req.cmd = READ_I2C; + req.i2c_addr = msg[i].addr; + req.addr = addr; + req.mbox = mbox; + req.addr_len = addr_len; + req.data_len = msg[i+1].len; + req.data = &msg[i+1].buf[0]; + ret = af9015_ctrl_msg(d, &req); + i += 2; + } else if (msg[i].flags & I2C_M_RD) { + if (msg[i].len > 61) { + ret = -EOPNOTSUPP; + goto error; + } + if (msg[i].addr == state->af9013_config[0].i2c_addr) { + ret = -EINVAL; + goto error; + } + req.cmd = READ_I2C; + req.i2c_addr = msg[i].addr; + req.addr = addr; + req.mbox = mbox; + req.addr_len = addr_len; + req.data_len = msg[i].len; + req.data = &msg[i].buf[0]; + ret = af9015_ctrl_msg(d, &req); + i += 1; + } else { + if (msg[i].len > 21) { + ret = -EOPNOTSUPP; + goto error; + } + if (msg[i].addr == state->af9013_config[0].i2c_addr) + req.cmd = WRITE_MEMORY; + else + req.cmd = WRITE_I2C; + req.i2c_addr = msg[i].addr; + req.addr = addr; + req.mbox = mbox; + req.addr_len = addr_len; + req.data_len = msg[i].len-addr_len; + req.data = &msg[i].buf[addr_len]; + ret = af9015_ctrl_msg(d, &req); + i += 1; + } + if (ret) + goto error; + + } + ret = i; + +error: + mutex_unlock(&d->i2c_mutex); + + return ret; +} + +static u32 af9015_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm af9015_i2c_algo = { + .master_xfer = af9015_i2c_xfer, + .functionality = af9015_i2c_func, +}; + +static int af9015_identify_state(struct dvb_usb_device *d, const char **name) +{ + int ret; + u8 reply; + struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply}; + + ret = af9015_ctrl_msg(d, &req); + if (ret) + return ret; + + dev_dbg(&d->udev->dev, "%s: reply=%02x\n", __func__, reply); + + if (reply == 0x02) + ret = WARM; + else + ret = COLD; + + return ret; +} + +static int af9015_download_firmware(struct dvb_usb_device *d, + const struct firmware *fw) +{ + struct af9015_state *state = d_to_priv(d); + int i, len, remaining, ret; + struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL}; + u16 checksum = 0; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + /* calc checksum */ + for (i = 0; i < fw->size; i++) + checksum += fw->data[i]; + + state->firmware_size = fw->size; + state->firmware_checksum = checksum; + + #define FW_ADDR 0x5100 /* firmware start address */ + #define LEN_MAX 55 /* max packet size */ + for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) { + len = remaining; + if (len > LEN_MAX) + len = LEN_MAX; + + req.data_len = len; + req.data = (u8 *) &fw->data[fw->size - remaining]; + req.addr = FW_ADDR + fw->size - remaining; + + ret = af9015_ctrl_msg(d, &req); + if (ret) { + dev_err(&d->udev->dev, + "%s: firmware download failed=%d\n", + KBUILD_MODNAME, ret); + goto error; + } + } + + /* firmware loaded, request boot */ + req.cmd = BOOT; + req.data_len = 0; + ret = af9015_ctrl_msg(d, &req); + if (ret) { + dev_err(&d->udev->dev, "%s: firmware boot failed=%d\n", + KBUILD_MODNAME, ret); + goto error; + } + +error: + return ret; +} + +/* hash (and dump) eeprom */ +static int af9015_eeprom_hash(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + int ret, i; + static const unsigned int AF9015_EEPROM_SIZE = 256; + u8 buf[AF9015_EEPROM_SIZE]; + struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, NULL}; + + /* read eeprom */ + for (i = 0; i < AF9015_EEPROM_SIZE; i++) { + req.addr = i; + req.data = &buf[i]; + ret = af9015_ctrl_msg(d, &req); + if (ret < 0) + goto err; + } + + /* calculate checksum */ + for (i = 0; i < AF9015_EEPROM_SIZE / sizeof(u32); i++) { + state->eeprom_sum *= GOLDEN_RATIO_PRIME_32; + state->eeprom_sum += le32_to_cpu(((u32 *)buf)[i]); + } + + for (i = 0; i < AF9015_EEPROM_SIZE; i += 16) + dev_dbg(&d->udev->dev, "%s: %*ph\n", __func__, 16, buf + i); + + dev_dbg(&d->udev->dev, "%s: eeprom sum=%.8x\n", + __func__, state->eeprom_sum); + return 0; +err: + dev_err(&d->udev->dev, "%s: eeprom failed=%d\n", KBUILD_MODNAME, ret); + return ret; +} + +static int af9015_read_config(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + int ret; + u8 val, i, offset = 0; + struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; + + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + /* IR remote controller */ + req.addr = AF9015_EEPROM_IR_MODE; + /* first message will timeout often due to possible hw bug */ + for (i = 0; i < 4; i++) { + ret = af9015_ctrl_msg(d, &req); + if (!ret) + break; + } + if (ret) + goto error; + + ret = af9015_eeprom_hash(d); + if (ret) + goto error; + + state->ir_mode = val; + dev_dbg(&d->udev->dev, "%s: IR mode=%d\n", __func__, val); + + /* TS mode - one or two receivers */ + req.addr = AF9015_EEPROM_TS_MODE; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + + state->dual_mode = val; + dev_dbg(&d->udev->dev, "%s: TS mode=%d\n", __func__, state->dual_mode); + + /* disable 2nd adapter because we don't have PID-filters */ + if (d->udev->speed == USB_SPEED_FULL) + state->dual_mode = 0; + + if (state->dual_mode) { + /* read 2nd demodulator I2C address */ + req.addr = AF9015_EEPROM_DEMOD2_I2C; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + + state->af9013_config[1].i2c_addr = val; + } + + for (i = 0; i < state->dual_mode + 1; i++) { + if (i == 1) + offset = AF9015_EEPROM_OFFSET; + /* xtal */ + req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + switch (val) { + case 0: + state->af9013_config[i].clock = 28800000; + break; + case 1: + state->af9013_config[i].clock = 20480000; + break; + case 2: + state->af9013_config[i].clock = 28000000; + break; + case 3: + state->af9013_config[i].clock = 25000000; + break; + }; + dev_dbg(&d->udev->dev, "%s: [%d] xtal=%d set clock=%d\n", + __func__, i, val, + state->af9013_config[i].clock); + + /* IF frequency */ + req.addr = AF9015_EEPROM_IF1H + offset; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + + state->af9013_config[i].if_frequency = val << 8; + + req.addr = AF9015_EEPROM_IF1L + offset; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + + state->af9013_config[i].if_frequency += val; + state->af9013_config[i].if_frequency *= 1000; + dev_dbg(&d->udev->dev, "%s: [%d] IF frequency=%d\n", __func__, + i, state->af9013_config[i].if_frequency); + + /* MT2060 IF1 */ + req.addr = AF9015_EEPROM_MT2060_IF1H + offset; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + state->mt2060_if1[i] = val << 8; + req.addr = AF9015_EEPROM_MT2060_IF1L + offset; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + state->mt2060_if1[i] += val; + dev_dbg(&d->udev->dev, "%s: [%d] MT2060 IF1=%d\n", __func__, i, + state->mt2060_if1[i]); + + /* tuner */ + req.addr = AF9015_EEPROM_TUNER_ID1 + offset; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + switch (val) { + case AF9013_TUNER_ENV77H11D5: + case AF9013_TUNER_MT2060: + case AF9013_TUNER_QT1010: + case AF9013_TUNER_UNKNOWN: + case AF9013_TUNER_MT2060_2: + case AF9013_TUNER_TDA18271: + case AF9013_TUNER_QT1010A: + case AF9013_TUNER_TDA18218: + state->af9013_config[i].spec_inv = 1; + break; + case AF9013_TUNER_MXL5003D: + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + case AF9013_TUNER_MXL5007T: + state->af9013_config[i].spec_inv = 0; + break; + case AF9013_TUNER_MC44S803: + state->af9013_config[i].gpio[1] = AF9013_GPIO_LO; + state->af9013_config[i].spec_inv = 1; + break; + default: + dev_err(&d->udev->dev, "%s: tuner id=%d not " \ + "supported, please report!\n", + KBUILD_MODNAME, val); + return -ENODEV; + }; + + state->af9013_config[i].tuner = val; + dev_dbg(&d->udev->dev, "%s: [%d] tuner id=%d\n", + __func__, i, val); + } + +error: + if (ret) + dev_err(&d->udev->dev, "%s: eeprom read failed=%d\n", + KBUILD_MODNAME, ret); + + /* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM + content :-( Override some wrong values here. Ditto for the + AVerTV Red HD+ (A850T) device. */ + if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA && + ((le16_to_cpu(d->udev->descriptor.idProduct) == + USB_PID_AVERMEDIA_A850) || + (le16_to_cpu(d->udev->descriptor.idProduct) == + USB_PID_AVERMEDIA_A850T))) { + dev_dbg(&d->udev->dev, + "%s: AverMedia A850: overriding config\n", + __func__); + /* disable dual mode */ + state->dual_mode = 0; + + /* set correct IF */ + state->af9013_config[0].if_frequency = 4570000; + } + + return ret; +} + +static int af9015_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, + struct usb_data_stream_properties *stream) +{ + struct dvb_usb_device *d = fe_to_d(fe); + dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, fe_to_adap(fe)->id); + + if (d->udev->speed == USB_SPEED_FULL) + stream->u.bulk.buffersize = TS_USB11_FRAME_SIZE; + + return 0; +} + +static int af9015_get_adapter_count(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + return state->dual_mode + 1; +} + +/* override demod callbacks for resource locking */ +static int af9015_af9013_set_frontend(struct dvb_frontend *fe) +{ + int ret; + struct af9015_state *state = fe_to_priv(fe); + + if (mutex_lock_interruptible(&state->fe_mutex)) + return -EAGAIN; + + ret = state->set_frontend[fe_to_adap(fe)->id](fe); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +/* override demod callbacks for resource locking */ +static int af9015_af9013_read_status(struct dvb_frontend *fe, + fe_status_t *status) +{ + int ret; + struct af9015_state *state = fe_to_priv(fe); + + if (mutex_lock_interruptible(&state->fe_mutex)) + return -EAGAIN; + + ret = state->read_status[fe_to_adap(fe)->id](fe, status); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +/* override demod callbacks for resource locking */ +static int af9015_af9013_init(struct dvb_frontend *fe) +{ + int ret; + struct af9015_state *state = fe_to_priv(fe); + + if (mutex_lock_interruptible(&state->fe_mutex)) + return -EAGAIN; + + ret = state->init[fe_to_adap(fe)->id](fe); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +/* override demod callbacks for resource locking */ +static int af9015_af9013_sleep(struct dvb_frontend *fe) +{ + int ret; + struct af9015_state *state = fe_to_priv(fe); + + if (mutex_lock_interruptible(&state->fe_mutex)) + return -EAGAIN; + + ret = state->sleep[fe_to_adap(fe)->id](fe); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +/* override tuner callbacks for resource locking */ +static int af9015_tuner_init(struct dvb_frontend *fe) +{ + int ret; + struct af9015_state *state = fe_to_priv(fe); + + if (mutex_lock_interruptible(&state->fe_mutex)) + return -EAGAIN; + + ret = state->tuner_init[fe_to_adap(fe)->id](fe); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +/* override tuner callbacks for resource locking */ +static int af9015_tuner_sleep(struct dvb_frontend *fe) +{ + int ret; + struct af9015_state *state = fe_to_priv(fe); + + if (mutex_lock_interruptible(&state->fe_mutex)) + return -EAGAIN; + + ret = state->tuner_sleep[fe_to_adap(fe)->id](fe); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +static int af9015_copy_firmware(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + int ret; + u8 fw_params[4]; + u8 val, i; + struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params), + fw_params }; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + fw_params[0] = state->firmware_size >> 8; + fw_params[1] = state->firmware_size & 0xff; + fw_params[2] = state->firmware_checksum >> 8; + fw_params[3] = state->firmware_checksum & 0xff; + + /* wait 2nd demodulator ready */ + msleep(100); + + ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr, + 0x98be, &val); + if (ret) + goto error; + else + dev_dbg(&d->udev->dev, "%s: firmware status=%02x\n", + __func__, val); + + if (val == 0x0c) /* fw is running, no need for download */ + goto exit; + + /* set I2C master clock to fast (to speed up firmware copy) */ + ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */ + if (ret) + goto error; + + msleep(50); + + /* copy firmware */ + ret = af9015_ctrl_msg(d, &req); + if (ret) + dev_err(&d->udev->dev, "%s: firmware copy cmd failed=%d\n", + KBUILD_MODNAME, ret); + + dev_dbg(&d->udev->dev, "%s: firmware copy done\n", __func__); + + /* set I2C master clock back to normal */ + ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */ + if (ret) + goto error; + + /* request boot firmware */ + ret = af9015_write_reg_i2c(d, state->af9013_config[1].i2c_addr, + 0xe205, 1); + dev_dbg(&d->udev->dev, "%s: firmware boot cmd status=%d\n", + __func__, ret); + if (ret) + goto error; + + for (i = 0; i < 15; i++) { + msleep(100); + + /* check firmware status */ + ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr, + 0x98be, &val); + dev_dbg(&d->udev->dev, "%s: firmware status cmd status=%d " \ + "firmware status=%02x\n", __func__, ret, val); + if (ret) + goto error; + + if (val == 0x0c || val == 0x04) /* success or fail */ + break; + } + + if (val == 0x04) { + dev_err(&d->udev->dev, "%s: firmware did not run\n", + KBUILD_MODNAME); + ret = -ETIMEDOUT; + } else if (val != 0x0c) { + dev_err(&d->udev->dev, "%s: firmware boot timeout\n", + KBUILD_MODNAME); + ret = -ETIMEDOUT; + } + +error: +exit: + return ret; +} + +static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct af9015_state *state = adap_to_priv(adap); + + if (adap->id == 0) { + state->af9013_config[0].ts_mode = AF9013_TS_USB; + memcpy(state->af9013_config[0].api_version, "\x0\x1\x9\x0", 4); + state->af9013_config[0].gpio[0] = AF9013_GPIO_HI; + state->af9013_config[0].gpio[3] = AF9013_GPIO_TUNER_ON; + } else if (adap->id == 1) { + state->af9013_config[1].ts_mode = AF9013_TS_SERIAL; + memcpy(state->af9013_config[1].api_version, "\x0\x1\x9\x0", 4); + state->af9013_config[1].gpio[0] = AF9013_GPIO_TUNER_ON; + state->af9013_config[1].gpio[1] = AF9013_GPIO_LO; + + /* copy firmware to 2nd demodulator */ + if (state->dual_mode) { + ret = af9015_copy_firmware(adap_to_d(adap)); + if (ret) { + dev_err(&adap_to_d(adap)->udev->dev, + "%s: firmware copy to 2nd " \ + "frontend failed, will " \ + "disable it\n", KBUILD_MODNAME); + state->dual_mode = 0; + return -ENODEV; + } + } else { + return -ENODEV; + } + } + + /* attach demodulator */ + adap->fe[0] = dvb_attach(af9013_attach, + &state->af9013_config[adap->id], &adap_to_d(adap)->i2c_adap); + + /* + * AF9015 firmware does not like if it gets interrupted by I2C adapter + * request on some critical phases. During normal operation I2C adapter + * is used only 2nd demodulator and tuner on dual tuner devices. + * Override demodulator callbacks and use mutex for limit access to + * those "critical" paths to keep AF9015 happy. + */ + if (adap->fe[0]) { + state->set_frontend[adap->id] = + adap->fe[0]->ops.set_frontend; + adap->fe[0]->ops.set_frontend = + af9015_af9013_set_frontend; + + state->read_status[adap->id] = + adap->fe[0]->ops.read_status; + adap->fe[0]->ops.read_status = + af9015_af9013_read_status; + + state->init[adap->id] = adap->fe[0]->ops.init; + adap->fe[0]->ops.init = af9015_af9013_init; + + state->sleep[adap->id] = adap->fe[0]->ops.sleep; + adap->fe[0]->ops.sleep = af9015_af9013_sleep; + } + + return adap->fe[0] == NULL ? -ENODEV : 0; +} + +static struct mt2060_config af9015_mt2060_config = { + .i2c_address = 0xc0, + .clock_out = 0, +}; + +static struct qt1010_config af9015_qt1010_config = { + .i2c_address = 0xc4, +}; + +static struct tda18271_config af9015_tda18271_config = { + .gate = TDA18271_GATE_DIGITAL, + .small_i2c = TDA18271_16_BYTE_CHUNK_INIT, +}; + +static struct mxl5005s_config af9015_mxl5003_config = { + .i2c_address = 0xc6, + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_DEFAULT, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static struct mxl5005s_config af9015_mxl5005_config = { + .i2c_address = 0xc6, + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_OFF, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static struct mc44s803_config af9015_mc44s803_config = { + .i2c_address = 0xc0, + .dig_out = 1, +}; + +static struct tda18218_config af9015_tda18218_config = { + .i2c_address = 0xc0, + .i2c_wr_max = 21, /* max wr bytes AF9015 I2C adap can handle at once */ +}; + +static struct mxl5007t_config af9015_mxl5007t_config = { + .xtal_freq_hz = MxL_XTAL_24_MHZ, + .if_freq_hz = MxL_IF_4_57_MHZ, +}; + +static int af9015_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct af9015_state *state = d_to_priv(d); + int ret; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + switch (state->af9013_config[adap->id].tuner) { + case AF9013_TUNER_MT2060: + case AF9013_TUNER_MT2060_2: + ret = dvb_attach(mt2060_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, &af9015_mt2060_config, + state->mt2060_if1[adap->id]) + == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_QT1010: + case AF9013_TUNER_QT1010A: + ret = dvb_attach(qt1010_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + &af9015_qt1010_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_TDA18271: + ret = dvb_attach(tda18271_attach, adap->fe[0], 0xc0, + &adap_to_d(adap)->i2c_adap, + &af9015_tda18271_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_TDA18218: + ret = dvb_attach(tda18218_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + &af9015_tda18218_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MXL5003D: + ret = dvb_attach(mxl5005s_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + &af9015_mxl5003_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + ret = dvb_attach(mxl5005s_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + &af9015_mxl5005_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_ENV77H11D5: + ret = dvb_attach(dvb_pll_attach, adap->fe[0], 0xc0, + &adap_to_d(adap)->i2c_adap, + DVB_PLL_TDA665X) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MC44S803: + ret = dvb_attach(mc44s803_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + &af9015_mc44s803_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MXL5007T: + ret = dvb_attach(mxl5007t_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + 0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_UNKNOWN: + default: + dev_err(&d->udev->dev, "%s: unknown tuner id=%d\n", + KBUILD_MODNAME, + state->af9013_config[adap->id].tuner); + ret = -ENODEV; + } + + if (adap->fe[0]->ops.tuner_ops.init) { + state->tuner_init[adap->id] = + adap->fe[0]->ops.tuner_ops.init; + adap->fe[0]->ops.tuner_ops.init = af9015_tuner_init; + } + + if (adap->fe[0]->ops.tuner_ops.sleep) { + state->tuner_sleep[adap->id] = + adap->fe[0]->ops.tuner_ops.sleep; + adap->fe[0]->ops.tuner_ops.sleep = af9015_tuner_sleep; + } + + return ret; +} + +static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + struct dvb_usb_device *d = adap_to_d(adap); + int ret; + dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); + + if (onoff) + ret = af9015_set_reg_bit(d, 0xd503, 0); + else + ret = af9015_clear_reg_bit(d, 0xd503, 0); + + return ret; +} + +static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, + int onoff) +{ + struct dvb_usb_device *d = adap_to_d(adap); + int ret; + u8 idx; + dev_dbg(&d->udev->dev, "%s: index=%d pid=%04x onoff=%d\n", + __func__, index, pid, onoff); + + ret = af9015_write_reg(d, 0xd505, (pid & 0xff)); + if (ret) + goto error; + + ret = af9015_write_reg(d, 0xd506, (pid >> 8)); + if (ret) + goto error; + + idx = ((index & 0x1f) | (1 << 5)); + ret = af9015_write_reg(d, 0xd504, idx); + +error: + return ret; +} + +static int af9015_init_endpoint(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + int ret; + u16 frame_size; + u8 packet_size; + dev_dbg(&d->udev->dev, "%s: USB speed=%d\n", __func__, d->udev->speed); + + if (d->udev->speed == USB_SPEED_FULL) { + frame_size = TS_USB11_FRAME_SIZE/4; + packet_size = TS_USB11_MAX_PACKET_SIZE/4; + } else { + frame_size = TS_USB20_FRAME_SIZE/4; + packet_size = TS_USB20_MAX_PACKET_SIZE/4; + } + + ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */ + if (ret) + goto error; + ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */ + if (ret) + goto error; + ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */ + if (ret) + goto error; + if (state->dual_mode) { + ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */ + if (ret) + goto error; + } + ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */ + if (ret) + goto error; + if (state->dual_mode) { + ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */ + if (ret) + goto error; + } + /* EP4 xfer length */ + ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd89, frame_size >> 8); + if (ret) + goto error; + /* EP5 xfer length */ + ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */ + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */ + if (ret) + goto error; + if (state->dual_mode) { + ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */ + if (ret) + goto error; + } + + /* enable / disable mp2if2 */ + if (state->dual_mode) + ret = af9015_set_reg_bit(d, 0xd50b, 0); + else + ret = af9015_clear_reg_bit(d, 0xd50b, 0); + +error: + if (ret) + dev_err(&d->udev->dev, "%s: endpoint init failed=%d\n", + KBUILD_MODNAME, ret); + + return ret; +} + +static int af9015_init(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + int ret; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + mutex_init(&state->fe_mutex); + + /* init RC canary */ + ret = af9015_write_reg(d, 0x98e9, 0xff); + if (ret) + goto error; + + ret = af9015_init_endpoint(d); + if (ret) + goto error; + +error: + return ret; +} + +struct af9015_rc_setup { + unsigned int id; + char *rc_codes; +}; + +static char *af9015_rc_setup_match(unsigned int id, + const struct af9015_rc_setup *table) +{ + for (; table->rc_codes; table++) + if (table->id == id) + return table->rc_codes; + return NULL; +} + +static const struct af9015_rc_setup af9015_rc_setup_modparam[] = { + { AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M }, + { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II }, + { AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND }, + { AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE }, + { AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS }, + { } +}; + +static const struct af9015_rc_setup af9015_rc_setup_hashes[] = { + { 0xb8feb708, RC_MAP_MSI_DIGIVOX_II }, + { 0xa3703d00, RC_MAP_ALINK_DTU_M }, + { 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */ + { 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */ + { } +}; + +static int af9015_rc_query(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + int ret; + u8 buf[17]; + + /* read registers needed to detect remote controller code */ + ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf)); + if (ret) + goto error; + + /* If any of these are non-zero, assume invalid data */ + if (buf[1] || buf[2] || buf[3]) { + dev_dbg(&d->udev->dev, "%s: invalid data\n", __func__); + return ret; + } + + /* Check for repeat of previous code */ + if ((state->rc_repeat != buf[6] || buf[0]) && + !memcmp(&buf[12], state->rc_last, 4)) { + dev_dbg(&d->udev->dev, "%s: key repeated\n", __func__); + rc_keydown(d->rc_dev, state->rc_keycode, 0); + state->rc_repeat = buf[6]; + return ret; + } + + /* Only process key if canary killed */ + if (buf[16] != 0xff && buf[0] != 0x01) { + dev_dbg(&d->udev->dev, "%s: key pressed %*ph\n", + __func__, 4, buf + 12); + + /* Reset the canary */ + ret = af9015_write_reg(d, 0x98e9, 0xff); + if (ret) + goto error; + + /* Remember this key */ + memcpy(state->rc_last, &buf[12], 4); + if (buf[14] == (u8) ~buf[15]) { + if (buf[12] == (u8) ~buf[13]) { + /* NEC */ + state->rc_keycode = buf[12] << 8 | buf[14]; + } else { + /* NEC extended*/ + state->rc_keycode = buf[12] << 16 | + buf[13] << 8 | buf[14]; + } + } else { + /* 32 bit NEC */ + state->rc_keycode = buf[12] << 24 | buf[13] << 16 | + buf[14] << 8 | buf[15]; + } + rc_keydown(d->rc_dev, state->rc_keycode, 0); + } else { + dev_dbg(&d->udev->dev, "%s: no key press\n", __func__); + /* Invalidate last keypress */ + /* Not really needed, but helps with debug */ + state->rc_last[2] = state->rc_last[3]; + } + + state->rc_repeat = buf[6]; + state->rc_failed = false; + +error: + if (ret) { + dev_warn(&d->udev->dev, "%s: rc query failed=%d\n", + KBUILD_MODNAME, ret); + + /* allow random errors as dvb-usb will stop polling on error */ + if (!state->rc_failed) + ret = 0; + + state->rc_failed = true; + } + + return ret; +} + +static int af9015_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) +{ + struct af9015_state *state = d_to_priv(d); + u16 vid = le16_to_cpu(d->udev->descriptor.idVendor); + + if (state->ir_mode == AF9015_IR_MODE_DISABLED) + return 0; + + /* try to load remote based module param */ + if (!rc->map_name) + rc->map_name = af9015_rc_setup_match(dvb_usb_af9015_remote, + af9015_rc_setup_modparam); + + /* try to load remote based eeprom hash */ + if (!rc->map_name) + rc->map_name = af9015_rc_setup_match(state->eeprom_sum, + af9015_rc_setup_hashes); + + /* try to load remote based USB iManufacturer string */ + if (!rc->map_name && vid == USB_VID_AFATECH) { + /* Check USB manufacturer and product strings and try + to determine correct remote in case of chip vendor + reference IDs are used. + DO NOT ADD ANYTHING NEW HERE. Use hashes instead. */ + char manufacturer[10]; + memset(manufacturer, 0, sizeof(manufacturer)); + usb_string(d->udev, d->udev->descriptor.iManufacturer, + manufacturer, sizeof(manufacturer)); + if (!strcmp("MSI", manufacturer)) { + /* iManufacturer 1 MSI + iProduct 2 MSI K-VOX */ + rc->map_name = af9015_rc_setup_match( + AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, + af9015_rc_setup_modparam); + } + } + + /* load empty to enable rc */ + if (!rc->map_name) + rc->map_name = RC_MAP_EMPTY; + + rc->allowed_protos = RC_TYPE_NEC; + rc->query = af9015_rc_query; + rc->interval = 500; + + return 0; +} + +/* interface 0 is used by DVB-T receiver and + interface 1 is for remote controller (HID) */ +static struct dvb_usb_device_properties af9015_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct af9015_state), + + .generic_bulk_ctrl_endpoint = 0x02, + .generic_bulk_ctrl_endpoint_response = 0x81, + + .identify_state = af9015_identify_state, + .firmware = AF9015_FIRMWARE, + .download_firmware = af9015_download_firmware, + + .i2c_algo = &af9015_i2c_algo, + .read_config = af9015_read_config, + .frontend_attach = af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .init = af9015_init, + .get_rc_config = af9015_get_rc_config, + .get_stream_config = af9015_get_stream_config, + + .get_adapter_count = af9015_get_adapter_count, + .adapter = { + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = af9015_pid_filter, + .pid_filter_ctrl = af9015_pid_filter_ctrl, + + .stream = DVB_USB_STREAM_BULK(0x84, 8, TS_USB20_FRAME_SIZE), + }, { + .stream = DVB_USB_STREAM_BULK(0x85, 8, TS_USB20_FRAME_SIZE), + }, + }, +}; + +static const struct usb_device_id af9015_id_table[] = { + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015, + &af9015_props, "Afatech AF9015 reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016, + &af9015_props, "Afatech AF9015 reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD, + &af9015_props, "Leadtek WinFast DTV Dongle Gold", RC_MAP_LEADTEK_Y04G0051) }, + { DVB_USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E, + &af9015_props, "Pinnacle PCTV 71e", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U, + &af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN, + &af9015_props, "DigitalNow TinyTwin", RC_MAP_AZUREWAVE_AD_TU700) }, + { DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700, + &af9015_props, "TwinHan AzureWave AD-TU700(704J)", RC_MAP_AZUREWAVE_AD_TU700) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2, + &af9015_props, "TerraTec Cinergy T USB XE", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T, + &af9015_props, "KWorld PlusTV Dual DVB-T PCI (DVB-T PC160-2T)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X, + &af9015_props, "AVerMedia AVerTV DVB-T Volar X", RC_MAP_AVERMEDIA_M135A) }, + { DVB_USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380, + &af9015_props, "Xtensions XD-380", NULL) }, + { DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO, + &af9015_props, "MSI DIGIVOX Duo", RC_MAP_MSI_DIGIVOX_III) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2, + &af9015_props, "Fujitsu-Siemens Slim Mobile USB DVB-T", NULL) }, + { DVB_USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2, + &af9015_props, "Telestar Starstick 2", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309, + &af9015_props, "AVerMedia A309", NULL) }, + { DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III, + &af9015_props, "MSI Digi VOX mini III", RC_MAP_MSI_DIGIVOX_III) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U, + &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2, + &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3, + &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT, + &af9015_props, "TrekStor DVB-T USB Stick", RC_MAP_TREKSTOR) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850, + &af9015_props, "AverMedia AVerTV Volar Black HD (A850)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805, + &af9015_props, "AverMedia AVerTV Volar GPS 805 (A805)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU, + &af9015_props, "Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810, + &af9015_props, "KWorld Digial MC-810", NULL) }, + { DVB_USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03, + &af9015_props, "Genius TVGo DVB-T03", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2, + &af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T, + &af9015_props, "KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20, + &af9015_props, "Sveon STV20 Tuner USB DVB-T HDTV", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2, + &af9015_props, "DigitalNow TinyTwin v2", RC_MAP_DIGITALNOW_TINYTWIN) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS, + &af9015_props, "Leadtek WinFast DTV2000DS", RC_MAP_LEADTEK_Y04G0051) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T, + &af9015_props, "KWorld USB DVB-T Stick Mobile (UB383-T)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4, + &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M, + &af9015_props, "AverMedia AVerTV Volar M (A815Mac)", NULL) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC, + &af9015_props, "TerraTec Cinergy T Stick RC", RC_MAP_TERRATEC_SLIM_2) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC, + &af9015_props, "TerraTec Cinergy T Stick Dual RC", RC_MAP_TERRATEC_SLIM) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T, + &af9015_props, "AverMedia AVerTV Red HD+ (A850T)", NULL) }, + { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3, + &af9015_props, "DigitalNow TinyTwin v3", RC_MAP_DIGITALNOW_TINYTWIN) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22, + &af9015_props, "Sveon STV22 Dual USB DVB-T Tuner HDTV", RC_MAP_MSI_DIGIVOX_III) }, + { } +}; +MODULE_DEVICE_TABLE(usb, af9015_id_table); + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver af9015_usb_driver = { + .name = KBUILD_MODNAME, + .id_table = af9015_id_table, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .reset_resume = dvb_usbv2_reset_resume, + .no_dynamic_id = 1, + .soft_unbind = 1, +}; + +module_usb_driver(af9015_usb_driver); + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Afatech AF9015 driver"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(AF9015_FIRMWARE); diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/usb/dvb-usb-v2/af9015.h similarity index 78% rename from drivers/media/dvb/dvb-usb/af9015.h rename to drivers/media/usb/dvb-usb-v2/af9015.h index 2f68419e899b670992f62366ec8563f4d28f9532..533637dedd23e6ea5e97badd2f7962ab90e18b80 100644 --- a/drivers/media/dvb/dvb-usb/af9015.h +++ b/drivers/media/usb/dvb-usb-v2/af9015.h @@ -21,18 +21,35 @@ * */ -#ifndef _DVB_USB_AF9015_H_ -#define _DVB_USB_AF9015_H_ +#ifndef AF9015_H +#define AF9015_H -#define DVB_USB_LOG_PREFIX "af9015" -#include "dvb-usb.h" +#include +#include "dvb_usb.h" +#include "af9013.h" +#include "dvb-pll.h" +#include "mt2060.h" +#include "qt1010.h" +#include "tda18271.h" +#include "mxl5005s.h" +#include "mc44s803.h" +#include "tda18218.h" +#include "mxl5007t.h" -#define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args) -#define deb_rc(args...) dprintk(dvb_usb_af9015_debug, 0x02, args) -#define deb_xfer(args...) dprintk(dvb_usb_af9015_debug, 0x04, args) -#define deb_reg(args...) dprintk(dvb_usb_af9015_debug, 0x08, args) -#define deb_i2c(args...) dprintk(dvb_usb_af9015_debug, 0x10, args) -#define deb_fw(args...) dprintk(dvb_usb_af9015_debug, 0x20, args) +#define AF9015_FIRMWARE "dvb-usb-af9015.fw" + +/* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0. + We use smaller - about 1/4 from the original, 5 and 87. */ +#define TS_PACKET_SIZE 188 + +#define TS_USB20_PACKET_COUNT 87 +#define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT) + +#define TS_USB11_PACKET_COUNT 5 +#define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT) + +#define TS_USB20_MAX_PACKET_SIZE 512 +#define TS_USB11_MAX_PACKET_SIZE 64 #define AF9015_I2C_EEPROM 0xa0 #define AF9015_I2C_DEMOD 0x38 @@ -99,9 +116,18 @@ enum af9015_ir_mode { }; struct af9015_state { + u8 ir_mode; u8 rc_repeat; u32 rc_keycode; u8 rc_last[4]; + bool rc_failed; + u8 dual_mode; + u8 seq; /* packet sequence number */ + u16 mt2060_if1[2]; + u16 firmware_size; + u16 firmware_checksum; + u32 eeprom_sum; + struct af9013_config af9013_config[2]; /* for demod callback override */ int (*set_frontend[2]) (struct dvb_frontend *fe); @@ -110,14 +136,7 @@ struct af9015_state { int (*sleep[2]) (struct dvb_frontend *fe); int (*tuner_init[2]) (struct dvb_frontend *fe); int (*tuner_sleep[2]) (struct dvb_frontend *fe); -}; - -struct af9015_config { - u8 dual_mode:1; - u16 mt2060_if1[2]; - u16 firmware_size; - u16 firmware_checksum; - u32 eeprom_sum; + struct mutex fe_mutex; }; enum af9015_remote { diff --git a/drivers/media/dvb/dvb-usb/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c similarity index 57% rename from drivers/media/dvb/dvb-usb/af9035.c rename to drivers/media/usb/dvb-usb-v2/af9035.c index e83b39d3993cebc70177891f5608f34b41ec2cc4..aabd3fc03ea7e1594c00aab276364b857e9459ff 100644 --- a/drivers/media/dvb/dvb-usb/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -22,9 +22,6 @@ #include "af9035.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static DEFINE_MUTEX(af9035_usb_mutex); -static struct dvb_usb_device_properties af9035_properties[2]; -static int af9035_properties_count = ARRAY_SIZE(af9035_properties); static u16 af9035_checksum(const u8 *buf, size_t len) { @@ -42,100 +39,80 @@ static u16 af9035_checksum(const u8 *buf, size_t len) return checksum; } -static int af9035_ctrl_msg(struct usb_device *udev, struct usb_req *req) +static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req) { #define BUF_LEN 64 #define REQ_HDR_LEN 4 /* send header size */ #define ACK_HDR_LEN 3 /* rece header size */ #define CHECKSUM_LEN 2 #define USB_TIMEOUT 2000 - - int ret, msg_len, act_len; + struct state *state = d_to_priv(d); + int ret, wlen, rlen; u8 buf[BUF_LEN]; - static u8 seq; /* packet sequence number */ u16 checksum, tmp_checksum; /* buffer overflow check */ if (req->wlen > (BUF_LEN - REQ_HDR_LEN - CHECKSUM_LEN) || - req->rlen > (BUF_LEN - ACK_HDR_LEN - CHECKSUM_LEN)) { - pr_debug("%s: too much data wlen=%d rlen=%d\n", __func__, - req->wlen, req->rlen); + req->rlen > (BUF_LEN - ACK_HDR_LEN - CHECKSUM_LEN)) { + dev_err(&d->udev->dev, "%s: too much data wlen=%d rlen=%d\n", + __func__, req->wlen, req->rlen); return -EINVAL; } - if (mutex_lock_interruptible(&af9035_usb_mutex) < 0) - return -EAGAIN; - buf[0] = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN - 1; buf[1] = req->mbox; buf[2] = req->cmd; - buf[3] = seq++; - if (req->wlen) - memcpy(&buf[4], req->wbuf, req->wlen); + buf[3] = state->seq++; + memcpy(&buf[REQ_HDR_LEN], req->wbuf, req->wlen); + + wlen = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN; + rlen = ACK_HDR_LEN + req->rlen + CHECKSUM_LEN; /* calc and add checksum */ checksum = af9035_checksum(buf, buf[0] - 1); buf[buf[0] - 1] = (checksum >> 8); buf[buf[0] - 0] = (checksum & 0xff); - msg_len = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN ; + /* no ack for these packets */ + if (req->cmd == CMD_FW_DL) + rlen = 0; - /* send req */ - ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len, - &act_len, USB_TIMEOUT); - if (ret < 0) - err("bulk message failed=%d (%d/%d)", ret, msg_len, act_len); - else - if (act_len != msg_len) - ret = -EIO; /* all data is not send */ - if (ret < 0) - goto err_mutex_unlock; + ret = dvb_usbv2_generic_rw(d, buf, wlen, buf, rlen); + if (ret) + goto err; /* no ack for those packets */ if (req->cmd == CMD_FW_DL) - goto exit_mutex_unlock; - - /* receive ack and data if read req */ - msg_len = ACK_HDR_LEN + req->rlen + CHECKSUM_LEN; - ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len, - &act_len, USB_TIMEOUT); - if (ret < 0) { - err("recv bulk message failed=%d", ret); - ret = -EIO; - goto err_mutex_unlock; - } - - if (act_len != msg_len) { - err("recv bulk message truncated (%d != %d)", act_len, msg_len); - ret = -EIO; - goto err_mutex_unlock; - } + goto exit; /* verify checksum */ - checksum = af9035_checksum(buf, act_len - 2); - tmp_checksum = (buf[act_len - 2] << 8) | buf[act_len - 1]; + checksum = af9035_checksum(buf, rlen - 2); + tmp_checksum = (buf[rlen - 2] << 8) | buf[rlen - 1]; if (tmp_checksum != checksum) { - err("%s: command=%02x checksum mismatch (%04x != %04x)", - __func__, req->cmd, tmp_checksum, checksum); + dev_err(&d->udev->dev, "%s: command=%02x checksum mismatch " \ + "(%04x != %04x)\n", KBUILD_MODNAME, req->cmd, + tmp_checksum, checksum); ret = -EIO; - goto err_mutex_unlock; + goto err; } /* check status */ if (buf[2]) { - pr_debug("%s: command=%02x failed fw error=%d\n", __func__, - req->cmd, buf[2]); + dev_dbg(&d->udev->dev, "%s: command=%02x failed fw error=%d\n", + __func__, req->cmd, buf[2]); ret = -EIO; - goto err_mutex_unlock; + goto err; } /* read request, copy returned data to return buf */ if (req->rlen) memcpy(req->rbuf, &buf[ACK_HDR_LEN], req->rlen); -err_mutex_unlock: -exit_mutex_unlock: - mutex_unlock(&af9035_usb_mutex); +exit: + return 0; + +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -155,7 +132,7 @@ static int af9035_wr_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) wbuf[5] = (reg >> 0) & 0xff; memcpy(&wbuf[6], val, len); - return af9035_ctrl_msg(d->udev, &req); + return af9035_ctrl_msg(d, &req); } /* read multiple registers */ @@ -165,7 +142,7 @@ static int af9035_rd_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) u8 mbox = (reg >> 16) & 0xff; struct usb_req req = { CMD_MEM_RD, mbox, sizeof(wbuf), wbuf, len, val }; - return af9035_ctrl_msg(d->udev, &req); + return af9035_ctrl_msg(d, &req); } /* write single register */ @@ -205,7 +182,7 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct state *state = d->priv; + struct state *state = d_to_priv(d); int ret; if (mutex_lock_interruptible(&d->i2c_mutex) < 0) @@ -249,7 +226,7 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, buf[3] = 0x00; /* reg addr MSB */ buf[4] = 0x00; /* reg addr LSB */ memcpy(&buf[5], msg[0].buf, msg[0].len); - ret = af9035_ctrl_msg(d->udev, &req); + ret = af9035_ctrl_msg(d, &req); } } else if (num == 1 && !(msg[0].flags & I2C_M_RD)) { if (msg[0].len > 40) { @@ -272,7 +249,7 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, buf[3] = 0x00; /* reg addr MSB */ buf[4] = 0x00; /* reg addr LSB */ memcpy(&buf[5], msg[0].buf, msg[0].len); - ret = af9035_ctrl_msg(d->udev, &req); + ret = af9035_ctrl_msg(d, &req); } } else { /* @@ -301,87 +278,7 @@ static struct i2c_algorithm af9035_i2c_algo = { .functionality = af9035_i2c_functionality, }; -#define AF9035_POLL 250 -static int af9035_rc_query(struct dvb_usb_device *d) -{ - unsigned int key; - unsigned char b[4]; - int ret; - struct usb_req req = { CMD_IR_GET, 0, 0, NULL, 4, b }; - - ret = af9035_ctrl_msg(d->udev, &req); - if (ret < 0) - goto err; - - if ((b[2] + b[3]) == 0xff) { - if ((b[0] + b[1]) == 0xff) { - /* NEC */ - key = b[0] << 8 | b[2]; - } else { - /* ext. NEC */ - key = b[0] << 16 | b[1] << 8 | b[2]; - } - } else { - key = b[0] << 24 | b[1] << 16 | b[2] << 8 | b[3]; - } - - rc_keydown(d->rc_dev, key, 0); - -err: - /* ignore errors */ - return 0; -} - -static int af9035_init(struct dvb_usb_device *d) -{ - struct state *state = d->priv; - int ret, i; - u16 frame_size = 87 * 188 / 4; - u8 packet_size = 512 / 4; - struct reg_val_mask tab[] = { - { 0x80f99d, 0x01, 0x01 }, - { 0x80f9a4, 0x01, 0x01 }, - { 0x00dd11, 0x00, 0x20 }, - { 0x00dd11, 0x00, 0x40 }, - { 0x00dd13, 0x00, 0x20 }, - { 0x00dd13, 0x00, 0x40 }, - { 0x00dd11, 0x20, 0x20 }, - { 0x00dd88, (frame_size >> 0) & 0xff, 0xff}, - { 0x00dd89, (frame_size >> 8) & 0xff, 0xff}, - { 0x00dd0c, packet_size, 0xff}, - { 0x00dd11, state->dual_mode << 6, 0x40 }, - { 0x00dd8a, (frame_size >> 0) & 0xff, 0xff}, - { 0x00dd8b, (frame_size >> 8) & 0xff, 0xff}, - { 0x00dd0d, packet_size, 0xff }, - { 0x80f9a3, 0x00, 0x01 }, - { 0x80f9cd, 0x00, 0x01 }, - { 0x80f99d, 0x00, 0x01 }, - { 0x80f9a4, 0x00, 0x01 }, - }; - - pr_debug("%s: USB speed=%d frame_size=%04x packet_size=%02x\n", - __func__, d->udev->speed, frame_size, packet_size); - - /* init endpoints */ - for (i = 0; i < ARRAY_SIZE(tab); i++) { - ret = af9035_wr_reg_mask(d, tab[i].reg, tab[i].val, - tab[i].mask); - if (ret < 0) - goto err; - } - - return 0; - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - - return ret; -} - -static int af9035_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) +static int af9035_identify_state(struct dvb_usb_device *d, const char **name) { int ret; u8 wbuf[1] = { 1 }; @@ -389,26 +286,25 @@ static int af9035_identify_state(struct usb_device *udev, struct usb_req req = { CMD_FW_QUERYINFO, 0, sizeof(wbuf), wbuf, sizeof(rbuf), rbuf }; - ret = af9035_ctrl_msg(udev, &req); + ret = af9035_ctrl_msg(d, &req); if (ret < 0) goto err; - pr_debug("%s: reply=%02x %02x %02x %02x\n", __func__, - rbuf[0], rbuf[1], rbuf[2], rbuf[3]); + dev_dbg(&d->udev->dev, "%s: reply=%*ph\n", __func__, 4, rbuf); if (rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3]) - *cold = 0; + ret = WARM; else - *cold = 1; + ret = COLD; - return 0; + return ret; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -static int af9035_download_firmware(struct usb_device *udev, +static int af9035_download_firmware(struct dvb_usb_device *d, const struct firmware *fw) { int ret, i, j, len; @@ -443,19 +339,19 @@ static int af9035_download_firmware(struct usb_device *udev, hdr_checksum = fw->data[fw->size - i + 5] << 8; hdr_checksum |= fw->data[fw->size - i + 6] << 0; - pr_debug("%s: core=%d addr=%04x data_len=%d checksum=%04x\n", - __func__, hdr_core, hdr_addr, hdr_data_len, - hdr_checksum); + dev_dbg(&d->udev->dev, "%s: core=%d addr=%04x data_len=%d " \ + "checksum=%04x\n", __func__, hdr_core, hdr_addr, + hdr_data_len, hdr_checksum); if (((hdr_core != 1) && (hdr_core != 2)) || (hdr_data_len > i)) { - pr_debug("%s: bad firmware\n", __func__); + dev_dbg(&d->udev->dev, "%s: bad firmware\n", __func__); break; } /* download begin packet */ req.cmd = CMD_FW_DL_BEGIN; - ret = af9035_ctrl_msg(udev, &req); + ret = af9035_ctrl_msg(d, &req); if (ret < 0) goto err; @@ -467,52 +363,54 @@ static int af9035_download_firmware(struct usb_device *udev, req_fw_dl.wlen = len; req_fw_dl.wbuf = (u8 *) &fw->data[fw->size - i + HDR_SIZE + hdr_data_len - j]; - ret = af9035_ctrl_msg(udev, &req_fw_dl); + ret = af9035_ctrl_msg(d, &req_fw_dl); if (ret < 0) goto err; } /* download end packet */ req.cmd = CMD_FW_DL_END; - ret = af9035_ctrl_msg(udev, &req); + ret = af9035_ctrl_msg(d, &req); if (ret < 0) goto err; i -= hdr_data_len + HDR_SIZE; - pr_debug("%s: data uploaded=%zu\n", __func__, fw->size - i); + dev_dbg(&d->udev->dev, "%s: data uploaded=%zu\n", + __func__, fw->size - i); } /* firmware loaded, request boot */ req.cmd = CMD_FW_BOOT; - ret = af9035_ctrl_msg(udev, &req); + ret = af9035_ctrl_msg(d, &req); if (ret < 0) goto err; /* ensure firmware starts */ wbuf[0] = 1; - ret = af9035_ctrl_msg(udev, &req_fw_ver); + ret = af9035_ctrl_msg(d, &req_fw_ver); if (ret < 0) goto err; if (!(rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])) { - info("firmware did not run"); + dev_err(&d->udev->dev, "%s: firmware did not run\n", + KBUILD_MODNAME); ret = -ENODEV; goto err; } - info("firmware version=%d.%d.%d.%d", rbuf[0], rbuf[1], rbuf[2], - rbuf[3]); + dev_info(&d->udev->dev, "%s: firmware version=%d.%d.%d.%d", + KBUILD_MODNAME, rbuf[0], rbuf[1], rbuf[2], rbuf[3]); return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -static int af9035_download_firmware_it9135(struct usb_device *udev, +static int af9035_download_firmware_it9135(struct dvb_usb_device *d, const struct firmware *fw) { int ret, i, i_prev; @@ -545,47 +443,48 @@ static int af9035_download_firmware_it9135(struct usb_device *udev, req_fw_dl.wlen = i - i_prev; req_fw_dl.wbuf = (u8 *) &fw->data[i_prev]; i_prev = i; - ret = af9035_ctrl_msg(udev, &req_fw_dl); + ret = af9035_ctrl_msg(d, &req_fw_dl); if (ret < 0) goto err; - pr_debug("%s: data uploaded=%d\n", __func__, i); + dev_dbg(&d->udev->dev, "%s: data uploaded=%d\n", + __func__, i); } } /* firmware loaded, request boot */ req.cmd = CMD_FW_BOOT; - ret = af9035_ctrl_msg(udev, &req); + ret = af9035_ctrl_msg(d, &req); if (ret < 0) goto err; /* ensure firmware starts */ wbuf[0] = 1; - ret = af9035_ctrl_msg(udev, &req_fw_ver); + ret = af9035_ctrl_msg(d, &req_fw_ver); if (ret < 0) goto err; if (!(rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])) { - info("firmware did not run"); + dev_err(&d->udev->dev, "%s: firmware did not run\n", + KBUILD_MODNAME); ret = -ENODEV; goto err; } - info("firmware version=%d.%d.%d.%d", rbuf[0], rbuf[1], rbuf[2], - rbuf[3]); + dev_info(&d->udev->dev, "%s: firmware version=%d.%d.%d.%d", + KBUILD_MODNAME, rbuf[0], rbuf[1], rbuf[2], rbuf[3]); return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -/* abuse that callback as there is no better one for reading eeprom */ -static int af9035_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) +static int af9035_read_config(struct dvb_usb_device *d) { - struct state *state = d->priv; + struct state *state = d_to_priv(d); int ret, i, eeprom_shift = 0; u8 tmp; u16 tmp16; @@ -596,27 +495,31 @@ static int af9035_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) goto err; state->dual_mode = tmp; - pr_debug("%s: dual mode=%d\n", __func__, state->dual_mode); + dev_dbg(&d->udev->dev, "%s: dual mode=%d\n", + __func__, state->dual_mode); - for (i = 0; i < af9035_properties[0].num_adapters; i++) { + for (i = 0; i < state->dual_mode + 1; i++) { /* tuner */ ret = af9035_rd_reg(d, EEPROM_1_TUNER_ID + eeprom_shift, &tmp); if (ret < 0) goto err; state->af9033_config[i].tuner = tmp; - pr_debug("%s: [%d]tuner=%02x\n", __func__, i, tmp); + dev_dbg(&d->udev->dev, "%s: [%d]tuner=%02x\n", + __func__, i, tmp); switch (tmp) { case AF9033_TUNER_TUA9001: case AF9033_TUNER_FC0011: case AF9033_TUNER_MXL5007T: case AF9033_TUNER_TDA18218: + case AF9033_TUNER_FC2580: state->af9033_config[i].spec_inv = 1; break; default: - warn("tuner ID=%02x not supported, please report!", - tmp); + dev_warn(&d->udev->dev, "%s: tuner id=%02x not " \ + "supported, please report!", + KBUILD_MODNAME, tmp); }; /* tuner IF frequency */ @@ -632,7 +535,7 @@ static int af9035_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) tmp16 |= tmp << 8; - pr_debug("%s: [%d]IF=%d\n", __func__, i, tmp16); + dev_dbg(&d->udev->dev, "%s: [%d]IF=%d\n", __func__, i, tmp16); eeprom_shift = 0x10; /* shift for the 2nd tuner params */ } @@ -644,47 +547,20 @@ static int af9035_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) tmp = (tmp >> 0) & 0x0f; - for (i = 0; i < af9035_properties[0].num_adapters; i++) + for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++) state->af9033_config[i].clock = clock_lut[tmp]; - ret = af9035_rd_reg(d, EEPROM_IR_MODE, &tmp); - if (ret < 0) - goto err; - pr_debug("%s: ir_mode=%02x\n", __func__, tmp); - - /* don't activate rc if in HID mode or if not available */ - if (tmp == 5) { - ret = af9035_rd_reg(d, EEPROM_IR_TYPE, &tmp); - if (ret < 0) - goto err; - pr_debug("%s: ir_type=%02x\n", __func__, tmp); - - switch (tmp) { - case 0: /* NEC */ - default: - d->props.rc.core.protocol = RC_TYPE_NEC; - d->props.rc.core.allowed_protos = RC_TYPE_NEC; - break; - case 1: /* RC6 */ - d->props.rc.core.protocol = RC_TYPE_RC6; - d->props.rc.core.allowed_protos = RC_TYPE_RC6; - break; - } - d->props.rc.core.rc_query = af9035_rc_query; - } - return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -/* abuse that callback as there is no better one for reading eeprom */ -static int af9035_read_mac_address_it9135(struct dvb_usb_device *d, u8 mac[6]) +static int af9035_read_config_it9135(struct dvb_usb_device *d) { - struct state *state = d->priv; + struct state *state = d_to_priv(d); int ret, i; u8 tmp; @@ -697,17 +573,63 @@ static int af9035_read_mac_address_it9135(struct dvb_usb_device *d, u8 mac[6]) tmp = (tmp >> 0) & 0x0f; - for (i = 0; i < af9035_properties[0].num_adapters; i++) + for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++) state->af9033_config[i].clock = clock_lut_it9135[tmp]; return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int af9035_tua9001_tuner_callback(struct dvb_usb_device *d, + int cmd, int arg) +{ + int ret; + u8 val; + + dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg); + + /* + * CEN always enabled by hardware wiring + * RESETN GPIOT3 + * RXEN GPIOT2 + */ + + switch (cmd) { + case TUA9001_CMD_RESETN: + if (arg) + val = 0x00; + else + val = 0x01; + + ret = af9035_wr_reg_mask(d, 0x00d8e7, val, 0x01); + if (ret < 0) + goto err; + break; + case TUA9001_CMD_RXEN: + if (arg) + val = 0x01; + else + val = 0x00; + + ret = af9035_wr_reg_mask(d, 0x00d8eb, val, 0x01); + if (ret < 0) + goto err; + break; + } + + return 0; + +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } + static int af9035_fc0011_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) { @@ -768,23 +690,25 @@ static int af9035_fc0011_tuner_callback(struct dvb_usb_device *d, return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int af9035_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) { - struct state *state = d->priv; + struct state *state = d_to_priv(d); switch (state->af9033_config[0].tuner) { case AF9033_TUNER_FC0011: return af9035_fc0011_tuner_callback(d, cmd, arg); + case AF9033_TUNER_TUA9001: + return af9035_tua9001_tuner_callback(d, cmd, arg); default: break; } - return -ENODEV; + return 0; } static int af9035_frontend_callback(void *adapter_priv, int component, @@ -793,6 +717,9 @@ static int af9035_frontend_callback(void *adapter_priv, int component, struct i2c_adapter *adap = adapter_priv; struct dvb_usb_device *d = i2c_get_adapdata(adap); + dev_dbg(&d->udev->dev, "%s: component=%d cmd=%d arg=%d\n", + __func__, component, cmd, arg); + switch (component) { case DVB_FRONTEND_COMPONENT_TUNER: return af9035_tuner_callback(d, cmd, arg); @@ -800,12 +727,13 @@ static int af9035_frontend_callback(void *adapter_priv, int component, break; } - return -EINVAL; + return 0; } static int af9035_frontend_attach(struct dvb_usb_adapter *adap) { - struct state *state = adap->dev->priv; + struct state *state = adap_to_priv(adap); + struct dvb_usb_device *d = adap_to_d(adap); int ret; if (!state->af9033_config[adap->id].tuner) { @@ -818,33 +746,33 @@ static int af9035_frontend_attach(struct dvb_usb_adapter *adap) state->af9033_config[0].ts_mode = AF9033_TS_MODE_USB; state->af9033_config[1].ts_mode = AF9033_TS_MODE_SERIAL; - ret = af9035_wr_reg(adap->dev, 0x00417f, + ret = af9035_wr_reg(d, 0x00417f, state->af9033_config[1].i2c_addr); if (ret < 0) goto err; - ret = af9035_wr_reg(adap->dev, 0x00d81a, + ret = af9035_wr_reg(d, 0x00d81a, state->dual_mode); if (ret < 0) goto err; } /* attach demodulator */ - adap->fe_adap[0].fe = dvb_attach(af9033_attach, - &state->af9033_config[adap->id], &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe == NULL) { + adap->fe[0] = dvb_attach(af9033_attach, + &state->af9033_config[adap->id], &d->i2c_adap); + if (adap->fe[0] == NULL) { ret = -ENODEV; goto err; } /* disable I2C-gate */ - adap->fe_adap[0].fe->ops.i2c_gate_ctrl = NULL; - adap->fe_adap[0].fe->callback = af9035_frontend_callback; + adap->fe[0]->ops.i2c_gate_ctrl = NULL; + adap->fe[0]->callback = af9035_frontend_callback; return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -871,9 +799,15 @@ static struct tda18218_config af9035_tda18218_config = { .i2c_wr_max = 21, }; +static const struct fc2580_config af9035_fc2580_config = { + .i2c_addr = 0x56, + .clock = 16384000, +}; + static int af9035_tuner_attach(struct dvb_usb_adapter *adap) { - struct state *state = adap->dev->priv; + struct state *state = adap_to_priv(adap); + struct dvb_usb_device *d = adap_to_d(adap); int ret; struct dvb_frontend *fe; @@ -883,93 +817,95 @@ static int af9035_tuner_attach(struct dvb_usb_adapter *adap) AF9035 gpiot2 = TUA9001 RXEN */ /* configure gpiot2 and gpiot2 as output */ - ret = af9035_wr_reg_mask(adap->dev, 0x00d8ec, 0x01, 0x01); + ret = af9035_wr_reg_mask(d, 0x00d8ec, 0x01, 0x01); if (ret < 0) goto err; - ret = af9035_wr_reg_mask(adap->dev, 0x00d8ed, 0x01, 0x01); + ret = af9035_wr_reg_mask(d, 0x00d8ed, 0x01, 0x01); if (ret < 0) goto err; - ret = af9035_wr_reg_mask(adap->dev, 0x00d8e8, 0x01, 0x01); + ret = af9035_wr_reg_mask(d, 0x00d8e8, 0x01, 0x01); if (ret < 0) goto err; - ret = af9035_wr_reg_mask(adap->dev, 0x00d8e9, 0x01, 0x01); - if (ret < 0) - goto err; - - /* reset tuner */ - ret = af9035_wr_reg_mask(adap->dev, 0x00d8e7, 0x00, 0x01); - if (ret < 0) - goto err; - - usleep_range(2000, 20000); - - ret = af9035_wr_reg_mask(adap->dev, 0x00d8e7, 0x01, 0x01); - if (ret < 0) - goto err; - - /* activate tuner RX */ - /* TODO: use callback for TUA9001 RXEN */ - ret = af9035_wr_reg_mask(adap->dev, 0x00d8eb, 0x01, 0x01); + ret = af9035_wr_reg_mask(d, 0x00d8e9, 0x01, 0x01); if (ret < 0) goto err; /* attach tuner */ - fe = dvb_attach(tua9001_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, &af9035_tua9001_config); + fe = dvb_attach(tua9001_attach, adap->fe[0], + &d->i2c_adap, &af9035_tua9001_config); break; case AF9033_TUNER_FC0011: - fe = dvb_attach(fc0011_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, &af9035_fc0011_config); + fe = dvb_attach(fc0011_attach, adap->fe[0], + &d->i2c_adap, &af9035_fc0011_config); break; case AF9033_TUNER_MXL5007T: - ret = af9035_wr_reg(adap->dev, 0x00d8e0, 1); + ret = af9035_wr_reg(d, 0x00d8e0, 1); if (ret < 0) goto err; - ret = af9035_wr_reg(adap->dev, 0x00d8e1, 1); + ret = af9035_wr_reg(d, 0x00d8e1, 1); if (ret < 0) goto err; - ret = af9035_wr_reg(adap->dev, 0x00d8df, 0); + ret = af9035_wr_reg(d, 0x00d8df, 0); if (ret < 0) goto err; msleep(30); - ret = af9035_wr_reg(adap->dev, 0x00d8df, 1); + ret = af9035_wr_reg(d, 0x00d8df, 1); if (ret < 0) goto err; msleep(300); - ret = af9035_wr_reg(adap->dev, 0x00d8c0, 1); + ret = af9035_wr_reg(d, 0x00d8c0, 1); if (ret < 0) goto err; - ret = af9035_wr_reg(adap->dev, 0x00d8c1, 1); + ret = af9035_wr_reg(d, 0x00d8c1, 1); if (ret < 0) goto err; - ret = af9035_wr_reg(adap->dev, 0x00d8bf, 0); + ret = af9035_wr_reg(d, 0x00d8bf, 0); if (ret < 0) goto err; - ret = af9035_wr_reg(adap->dev, 0x00d8b4, 1); + ret = af9035_wr_reg(d, 0x00d8b4, 1); if (ret < 0) goto err; - ret = af9035_wr_reg(adap->dev, 0x00d8b5, 1); + ret = af9035_wr_reg(d, 0x00d8b5, 1); if (ret < 0) goto err; - ret = af9035_wr_reg(adap->dev, 0x00d8b3, 1); + ret = af9035_wr_reg(d, 0x00d8b3, 1); if (ret < 0) goto err; /* attach tuner */ - fe = dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, 0x60, &af9035_mxl5007t_config); + fe = dvb_attach(mxl5007t_attach, adap->fe[0], + &d->i2c_adap, 0x60, &af9035_mxl5007t_config); break; case AF9033_TUNER_TDA18218: /* attach tuner */ - fe = dvb_attach(tda18218_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, &af9035_tda18218_config); + fe = dvb_attach(tda18218_attach, adap->fe[0], + &d->i2c_adap, &af9035_tda18218_config); + break; + case AF9033_TUNER_FC2580: + /* Tuner enable using gpiot2_o, gpiot2_en and gpiot2_on */ + ret = af9035_wr_reg_mask(d, 0xd8eb, 0x01, 0x01); + if (ret < 0) + goto err; + + ret = af9035_wr_reg_mask(d, 0xd8ec, 0x01, 0x01); + if (ret < 0) + goto err; + + ret = af9035_wr_reg_mask(d, 0xd8ed, 0x01, 0x01); + if (ret < 0) + goto err; + + usleep_range(10000, 50000); + /* attach tuner */ + fe = dvb_attach(fc2580_attach, adap->fe[0], + &d->i2c_adap, &af9035_fc2580_config); break; default: fe = NULL; @@ -983,256 +919,234 @@ static int af9035_tuner_attach(struct dvb_usb_adapter *adap) return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -enum af9035_id_entry { - AF9035_15A4_9035, - AF9035_15A4_1000, - AF9035_15A4_1001, - AF9035_15A4_1002, - AF9035_15A4_1003, - AF9035_0CCD_0093, - AF9035_07CA_A835, - AF9035_07CA_B835, - AF9035_07CA_1867, - AF9035_07CA_A867, - AF9035_07CA_0825, -}; - -static struct usb_device_id af9035_id[] = { - [AF9035_15A4_9035] = { - USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_9035)}, - [AF9035_15A4_1000] = { - USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1000)}, - [AF9035_15A4_1001] = { - USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1001)}, - [AF9035_15A4_1002] = { - USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1002)}, - [AF9035_15A4_1003] = { - USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1003)}, - [AF9035_0CCD_0093] = { - USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK)}, - [AF9035_07CA_A835] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835)}, - [AF9035_07CA_B835] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_B835)}, - [AF9035_07CA_1867] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_1867)}, - [AF9035_07CA_A867] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A867)}, - [AF9035_07CA_0825] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TWINSTAR)}, - {}, -}; +static int af9035_init(struct dvb_usb_device *d) +{ + struct state *state = d_to_priv(d); + int ret, i; + u16 frame_size = 87 * 188 / 4; + u8 packet_size = 512 / 4; + struct reg_val_mask tab[] = { + { 0x80f99d, 0x01, 0x01 }, + { 0x80f9a4, 0x01, 0x01 }, + { 0x00dd11, 0x00, 0x20 }, + { 0x00dd11, 0x00, 0x40 }, + { 0x00dd13, 0x00, 0x20 }, + { 0x00dd13, 0x00, 0x40 }, + { 0x00dd11, 0x20, 0x20 }, + { 0x00dd88, (frame_size >> 0) & 0xff, 0xff}, + { 0x00dd89, (frame_size >> 8) & 0xff, 0xff}, + { 0x00dd0c, packet_size, 0xff}, + { 0x00dd11, state->dual_mode << 6, 0x40 }, + { 0x00dd8a, (frame_size >> 0) & 0xff, 0xff}, + { 0x00dd8b, (frame_size >> 8) & 0xff, 0xff}, + { 0x00dd0d, packet_size, 0xff }, + { 0x80f9a3, 0x00, 0x01 }, + { 0x80f9cd, 0x00, 0x01 }, + { 0x80f99d, 0x00, 0x01 }, + { 0x80f9a4, 0x00, 0x01 }, + }; -MODULE_DEVICE_TABLE(usb, af9035_id); - -static struct dvb_usb_device_properties af9035_properties[] = { - { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .download_firmware = af9035_download_firmware, - .firmware = "dvb-usb-af9035-02.fw", - .no_reconnect = 1, - - .size_of_priv = sizeof(struct state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = { - { - .frontend_attach = af9035_frontend_attach, - .tuner_attach = af9035_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x84, - .u = { - .bulk = { - .buffersize = (87 * 188), - } - } - } - } - } - } - }, + dev_dbg(&d->udev->dev, "%s: USB speed=%d frame_size=%04x " \ + "packet_size=%02x\n", __func__, + d->udev->speed, frame_size, packet_size); - .identify_state = af9035_identify_state, - .read_mac_address = af9035_read_mac_address, + /* init endpoints */ + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = af9035_wr_reg_mask(d, tab[i].reg, tab[i].val, + tab[i].mask); + if (ret < 0) + goto err; + } - .i2c_algo = &af9035_i2c_algo, + return 0; - .rc.core = { - .protocol = RC_TYPE_UNKNOWN, - .module_name = "af9035", - .rc_query = NULL, - .rc_interval = AF9035_POLL, - .allowed_protos = RC_TYPE_UNKNOWN, - .rc_codes = RC_MAP_EMPTY, - }, - .num_device_descs = 5, - .devices = { - { - .name = "Afatech AF9035 reference design", - .cold_ids = { - &af9035_id[AF9035_15A4_9035], - &af9035_id[AF9035_15A4_1000], - &af9035_id[AF9035_15A4_1001], - &af9035_id[AF9035_15A4_1002], - &af9035_id[AF9035_15A4_1003], - }, - }, { - .name = "TerraTec Cinergy T Stick", - .cold_ids = { - &af9035_id[AF9035_0CCD_0093], - }, - }, { - .name = "AVerMedia AVerTV Volar HD/PRO (A835)", - .cold_ids = { - &af9035_id[AF9035_07CA_A835], - &af9035_id[AF9035_07CA_B835], - }, - }, { - .name = "AVerMedia HD Volar (A867)", - .cold_ids = { - &af9035_id[AF9035_07CA_1867], - &af9035_id[AF9035_07CA_A867], - }, - }, { - .name = "AVerMedia Twinstar (A825)", - .cold_ids = { - &af9035_id[AF9035_07CA_0825], - }, - }, - } - }, - { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .download_firmware = af9035_download_firmware_it9135, - .firmware = "dvb-usb-it9135-01.fw", - .no_reconnect = 1, - - .size_of_priv = sizeof(struct state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = { - { - .frontend_attach = af9035_frontend_attach, - .tuner_attach = af9035_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x84, - .u = { - .bulk = { - .buffersize = (87 * 188), - } - } - } - } - } - } - }, +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - .identify_state = af9035_identify_state, - .read_mac_address = af9035_read_mac_address_it9135, + return ret; +} - .i2c_algo = &af9035_i2c_algo, +static int af9035_rc_query(struct dvb_usb_device *d) +{ + unsigned int key; + unsigned char b[4]; + int ret; + struct usb_req req = { CMD_IR_GET, 0, 0, NULL, 4, b }; - .num_device_descs = 0, /* disabled as no support for IT9135 */ - .devices = { - { - .name = "ITE Tech. IT9135 reference design", - }, - } - }, -}; + ret = af9035_ctrl_msg(d, &req); + if (ret < 0) + goto err; -static int af9035_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int ret, i; - struct dvb_usb_device *d = NULL; - struct usb_device *udev; - bool found; - - pr_debug("%s: interface=%d\n", __func__, - intf->cur_altsetting->desc.bInterfaceNumber); - - /* interface 0 is used by DVB-T receiver and - interface 1 is for remote controller (HID) */ - if (intf->cur_altsetting->desc.bInterfaceNumber != 0) - return 0; - - /* Dynamic USB ID support. Replaces first device ID with current one. */ - udev = interface_to_usbdev(intf); - - for (i = 0, found = false; i < ARRAY_SIZE(af9035_id) - 1; i++) { - if (af9035_id[i].idVendor == - le16_to_cpu(udev->descriptor.idVendor) && - af9035_id[i].idProduct == - le16_to_cpu(udev->descriptor.idProduct)) { - found = true; - break; + if ((b[2] + b[3]) == 0xff) { + if ((b[0] + b[1]) == 0xff) { + /* NEC */ + key = b[0] << 8 | b[2]; + } else { + /* ext. NEC */ + key = b[0] << 16 | b[1] << 8 | b[2]; } + } else { + key = b[0] << 24 | b[1] << 16 | b[2] << 8 | b[3]; } - if (!found) { - pr_debug("%s: using dynamic ID %04x:%04x\n", __func__, - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct)); - af9035_properties[0].devices[0].cold_ids[0]->idVendor = - le16_to_cpu(udev->descriptor.idVendor); - af9035_properties[0].devices[0].cold_ids[0]->idProduct = - le16_to_cpu(udev->descriptor.idProduct); - } - + rc_keydown(d->rc_dev, key, 0); - for (i = 0; i < af9035_properties_count; i++) { - ret = dvb_usb_device_init(intf, &af9035_properties[i], - THIS_MODULE, &d, adapter_nr); +err: + /* ignore errors */ + return 0; +} - if (ret == -ENODEV) - continue; - else - break; - } +static int af9035_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) +{ + int ret; + u8 tmp; + ret = af9035_rd_reg(d, EEPROM_IR_MODE, &tmp); if (ret < 0) goto err; - if (d) { - ret = af9035_init(d); + dev_dbg(&d->udev->dev, "%s: ir_mode=%02x\n", __func__, tmp); + + /* don't activate rc if in HID mode or if not available */ + if (tmp == 5) { + ret = af9035_rd_reg(d, EEPROM_IR_TYPE, &tmp); if (ret < 0) goto err; + + dev_dbg(&d->udev->dev, "%s: ir_type=%02x\n", __func__, tmp); + + switch (tmp) { + case 0: /* NEC */ + default: + rc->allowed_protos = RC_TYPE_NEC; + break; + case 1: /* RC6 */ + rc->allowed_protos = RC_TYPE_RC6; + break; + } + + rc->query = af9035_rc_query; + rc->interval = 500; + + /* load empty to enable rc */ + if (!rc->map_name) + rc->map_name = RC_MAP_EMPTY; } return 0; err: - pr_debug("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -/* usb specific object needed to register this driver with the usb subsystem */ +/* interface 0 is used by DVB-T receiver and + interface 1 is for remote controller (HID) */ +static const struct dvb_usb_device_properties af9035_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct state), + + .generic_bulk_ctrl_endpoint = 0x02, + .generic_bulk_ctrl_endpoint_response = 0x81, + + .identify_state = af9035_identify_state, + .firmware = AF9035_FIRMWARE_AF9035, + .download_firmware = af9035_download_firmware, + + .i2c_algo = &af9035_i2c_algo, + .read_config = af9035_read_config, + .frontend_attach = af9035_frontend_attach, + .tuner_attach = af9035_tuner_attach, + .init = af9035_init, + .get_rc_config = af9035_get_rc_config, + + .num_adapters = 1, + .adapter = { + { + .stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188), + }, { + .stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188), + }, + }, +}; + +static const struct dvb_usb_device_properties it9135_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct state), + + .generic_bulk_ctrl_endpoint = 0x02, + .generic_bulk_ctrl_endpoint_response = 0x81, + + .identify_state = af9035_identify_state, + .firmware = AF9035_FIRMWARE_IT9135, + .download_firmware = af9035_download_firmware_it9135, + + .i2c_algo = &af9035_i2c_algo, + .read_config = af9035_read_config_it9135, + .frontend_attach = af9035_frontend_attach, + .tuner_attach = af9035_tuner_attach, + .init = af9035_init, + .get_rc_config = af9035_get_rc_config, + + .num_adapters = 1, + .adapter = { + { + .stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188), + }, { + .stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188), + }, + }, +}; + +static const struct usb_device_id af9035_id_table[] = { + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_9035, + &af9035_props, "Afatech AF9035 reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1000, + &af9035_props, "Afatech AF9035 reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1001, + &af9035_props, "Afatech AF9035 reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1002, + &af9035_props, "Afatech AF9035 reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1003, + &af9035_props, "Afatech AF9035 reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK, + &af9035_props, "TerraTec Cinergy T Stick", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835, + &af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_B835, + &af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_1867, + &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A867, + &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TWINSTAR, + &af9035_props, "AVerMedia Twinstar (A825)", NULL) }, + { DVB_USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100MINI_PLUS, + &af9035_props, "Asus U3100Mini Plus", NULL) }, + { } +}; +MODULE_DEVICE_TABLE(usb, af9035_id_table); + static struct usb_driver af9035_usb_driver = { - .name = "dvb_usb_af9035", - .probe = af9035_usb_probe, - .disconnect = dvb_usb_device_exit, - .id_table = af9035_id, + .name = KBUILD_MODNAME, + .id_table = af9035_id_table, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .reset_resume = dvb_usbv2_reset_resume, + .no_dynamic_id = 1, + .soft_unbind = 1, }; module_usb_driver(af9035_usb_driver); @@ -1240,3 +1154,5 @@ module_usb_driver(af9035_usb_driver); MODULE_AUTHOR("Antti Palosaari "); MODULE_DESCRIPTION("Afatech AF9035 driver"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(AF9035_FIRMWARE_AF9035); +MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135); diff --git a/drivers/media/dvb/dvb-usb/af9035.h b/drivers/media/usb/dvb-usb-v2/af9035.h similarity index 93% rename from drivers/media/dvb/dvb-usb/af9035.h rename to drivers/media/usb/dvb-usb-v2/af9035.h index 481a1a43dd2a65909ad9846f4b9332aa95f98bb4..75ef1ec13fbf0afecdf6560c95148153ec08d3d0 100644 --- a/drivers/media/dvb/dvb-usb/af9035.h +++ b/drivers/media/usb/dvb-usb-v2/af9035.h @@ -22,15 +22,13 @@ #ifndef AF9035_H #define AF9035_H -/* prefix for dvb-usb log writings */ -#define DVB_USB_LOG_PREFIX "af9035" - -#include "dvb-usb.h" +#include "dvb_usb.h" #include "af9033.h" #include "tua9001.h" #include "fc0011.h" #include "mxl5007t.h" #include "tda18218.h" +#include "fc2580.h" struct reg_val { u32 reg; @@ -53,6 +51,7 @@ struct usb_req { }; struct state { + u8 seq; /* packet sequence number */ bool dual_mode; struct af9033_config af9033_config[2]; @@ -86,6 +85,9 @@ u32 clock_lut_it9135[] = { 22000000, /* 22.00 MHz */ }; +#define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw" +#define AF9035_FIRMWARE_IT9135 "dvb-usb-it9135-01.fw" + /* EEPROM locations */ #define EEPROM_IR_MODE 0x430d #define EEPROM_DUAL_MODE 0x4326 diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/usb/dvb-usb-v2/anysee.c similarity index 67% rename from drivers/media/dvb/dvb-usb/anysee.c rename to drivers/media/usb/dvb-usb-v2/anysee.c index 03c28655af1be54eec6e10486ab5fa71ccc58787..ec540140c81037ffb0317a3d726fbd30e58fa94e 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/usb/dvb-usb-v2/anysee.c @@ -32,6 +32,7 @@ */ #include "anysee.h" +#include "dvb-pll.h" #include "tda1002x.h" #include "mt352.h" #include "mt352_priv.h" @@ -43,36 +44,26 @@ #include "isl6423.h" #include "cxd2820r.h" -/* debug */ -static int dvb_usb_anysee_debug; -module_param_named(debug, dvb_usb_anysee_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); -static int dvb_usb_anysee_delsys; -module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644); -MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - static DEFINE_MUTEX(anysee_usb_mutex); static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, u8 *rbuf, u8 rlen) { - struct anysee_state *state = d->priv; + struct anysee_state *state = d_to_priv(d); int act_len, ret, i; u8 buf[64]; memcpy(&buf[0], sbuf, slen); buf[60] = state->seq++; - if (mutex_lock_interruptible(&anysee_usb_mutex) < 0) - return -EAGAIN; + mutex_lock(&anysee_usb_mutex); - deb_xfer(">>> "); - debug_dump(buf, slen, deb_xfer); + dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, slen, buf); /* We need receive one message more after dvb_usb_generic_rw due to weird transaction flow, which is 1 x send + 2 x receive. */ - ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0); + ret = dvb_usbv2_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf)); if (ret) goto error_unlock; @@ -91,18 +82,19 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, for (i = 0; i < 3; i++) { /* receive 2nd answer */ ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, - d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf), + d->props->generic_bulk_ctrl_endpoint), buf, sizeof(buf), &act_len, 2000); if (ret) { - deb_info("%s: recv bulk message failed: %d", - __func__, ret); + dev_dbg(&d->udev->dev, "%s: recv bulk message " \ + "failed=%d\n", __func__, ret); } else { - deb_xfer("<<< "); - debug_dump(buf, rlen, deb_xfer); + dev_dbg(&d->udev->dev, "%s: <<< %*ph\n", __func__, + rlen, buf); if (buf[63] != 0x4f) - deb_info("%s: cmd failed\n", __func__); + dev_dbg(&d->udev->dev, "%s: cmd failed\n", + __func__); break; } @@ -110,7 +102,8 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, if (ret) { /* all retries failed, it is fatal */ - err("%s: recv bulk message failed: %d", __func__, ret); + dev_err(&d->udev->dev, "%s: recv bulk message failed=%d\n", + KBUILD_MODNAME, ret); goto error_unlock; } @@ -129,14 +122,14 @@ static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val) u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01}; int ret; ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1); - deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val); + dev_dbg(&d->udev->dev, "%s: reg=%04x val=%02x\n", __func__, reg, *val); return ret; } static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val) { u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val}; - deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val); + dev_dbg(&d->udev->dev, "%s: reg=%04x val=%02x\n", __func__, reg, val); return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); } @@ -190,24 +183,25 @@ static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id) return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3); } -static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +static int anysee_streaming_ctrl(struct dvb_frontend *fe, int onoff) { u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00}; - deb_info("%s: onoff:%02x\n", __func__, onoff); - return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0); + dev_dbg(&fe_to_d(fe)->udev->dev, "%s: onoff=%d\n", __func__, onoff); + return anysee_ctrl_msg(fe_to_d(fe), buf, sizeof(buf), NULL, 0); } static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval) { u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval}; - deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval); + dev_dbg(&d->udev->dev, "%s: state=%d interval=%d\n", __func__, + mode, interval); return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); } static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff) { u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff}; - deb_info("%s: onoff:%02x\n", __func__, onoff); + dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); } @@ -509,23 +503,48 @@ static struct cxd2820r_config anysee_cxd2820r_config = { * IOE[5] STV0903 1=enabled */ +static int anysee_read_config(struct dvb_usb_device *d) +{ + struct anysee_state *state = d_to_priv(d); + int ret; + u8 hw_info[3]; + + /* + * Check which hardware we have. + * We must do this call two times to get reliable values (hw/fw bug). + */ + ret = anysee_get_hw_info(d, hw_info); + if (ret) + goto error; + + ret = anysee_get_hw_info(d, hw_info); + if (ret) + goto error; + + /* + * Meaning of these info bytes are guessed. + */ + dev_info(&d->udev->dev, "%s: firmware version %d.%d hardware id %d\n", + KBUILD_MODNAME, hw_info[1], hw_info[2], hw_info[0]); + + state->hw = hw_info[0]; +error: + return ret; +} /* external I2C gate used for DNOD44CDH086A(TDA18212) tuner module */ static int anysee_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { - struct dvb_usb_adapter *adap = fe->dvb->priv; - /* enable / disable tuner access on IOE[4] */ - return anysee_wr_reg_mask(adap->dev, REG_IOE, (enable << 4), 0x10); + return anysee_wr_reg_mask(fe_to_d(fe), REG_IOE, (enable << 4), 0x10); } static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff) { - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct anysee_state *state = adap->dev->priv; + struct anysee_state *state = fe_to_priv(fe); + struct dvb_usb_device *d = fe_to_d(fe); int ret; - - deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff); + dev_dbg(&d->udev->dev, "%s: fe=%d onoff=%d\n", __func__, fe->id, onoff); /* no frontend sleep control */ if (onoff == 0) @@ -536,40 +555,34 @@ static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff) /* E30 Combo Plus */ /* E30 C Plus */ - if ((fe->id ^ dvb_usb_anysee_delsys) == 0) { + if (fe->id == 0) { /* disable DVB-T demod on IOD[0] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0), - 0x01); + ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 0), 0x01); if (ret) goto error; /* enable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5), - 0x20); + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20); if (ret) goto error; /* enable DVB-C tuner on IOE[0] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0), - 0x01); + ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 0), 0x01); if (ret) goto error; } else { /* disable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5), - 0x20); + ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20); if (ret) goto error; /* enable DVB-T demod on IOD[0] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), - 0x01); + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); if (ret) goto error; /* enable DVB-T tuner on IOE[0] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0), - 0x01); + ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 0), 0x01); if (ret) goto error; } @@ -580,40 +593,34 @@ static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff) /* E7 TC */ /* E7 PTC */ - if ((fe->id ^ dvb_usb_anysee_delsys) == 0) { + if (fe->id == 0) { /* disable DVB-T demod on IOD[6] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6), - 0x40); + ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 6), 0x40); if (ret) goto error; /* enable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5), - 0x20); + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20); if (ret) goto error; /* enable IF route on IOE[0] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0), - 0x01); + ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 0), 0x01); if (ret) goto error; } else { /* disable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5), - 0x20); + ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20); if (ret) goto error; /* enable DVB-T demod on IOD[6] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6), - 0x40); + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 6), 0x40); if (ret) goto error; /* enable IF route on IOE[0] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0), - 0x01); + ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 0), 0x01); if (ret) goto error; } @@ -629,9 +636,9 @@ static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff) static int anysee_frontend_attach(struct dvb_usb_adapter *adap) { + struct anysee_state *state = adap_to_priv(adap); + struct dvb_usb_device *d = adap_to_d(adap); int ret; - struct anysee_state *state = adap->dev->priv; - u8 hw_info[3]; u8 tmp; struct i2c_msg msg[2] = { { @@ -647,100 +654,63 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) } }; - /* detect hardware only once */ - if (adap->fe_adap[0].fe == NULL) { - /* Check which hardware we have. - * We must do this call two times to get reliable values - * (hw/fw bug). - */ - ret = anysee_get_hw_info(adap->dev, hw_info); - if (ret) - goto error; - - ret = anysee_get_hw_info(adap->dev, hw_info); - if (ret) - goto error; - - /* Meaning of these info bytes are guessed. */ - info("firmware version:%d.%d hardware id:%d", - hw_info[1], hw_info[2], hw_info[0]); - - state->hw = hw_info[0]; - } - - /* set current frondend ID for devices having two frondends */ - if (adap->fe_adap[0].fe) - state->fe_id++; - switch (state->hw) { case ANYSEE_HW_507T: /* 2 */ /* E30 */ - if (state->fe_id) - break; - /* attach demod */ - adap->fe_adap[0].fe = dvb_attach(mt352_attach, - &anysee_mt352_config, &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe) + adap->fe[0] = dvb_attach(mt352_attach, &anysee_mt352_config, + &d->i2c_adap); + if (adap->fe[0]) break; /* attach demod */ - adap->fe_adap[0].fe = dvb_attach(zl10353_attach, - &anysee_zl10353_config, &adap->dev->i2c_adap); + adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &d->i2c_adap); break; case ANYSEE_HW_507CD: /* 6 */ /* E30 Plus */ - if (state->fe_id) - break; - /* enable DVB-T demod on IOD[0] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01); + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); if (ret) goto error; /* enable transport stream on IOA[7] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (0 << 7), 0x80); + ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80); if (ret) goto error; /* attach demod */ - adap->fe_adap[0].fe = dvb_attach(zl10353_attach, - &anysee_zl10353_config, &adap->dev->i2c_adap); + adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &d->i2c_adap); break; case ANYSEE_HW_507DC: /* 10 */ /* E30 C Plus */ - if (state->fe_id) - break; - /* enable DVB-C demod on IOD[0] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01); + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); if (ret) goto error; /* attach demod */ - adap->fe_adap[0].fe = dvb_attach(tda10023_attach, - &anysee_tda10023_config, &adap->dev->i2c_adap, 0x48); + adap->fe[0] = dvb_attach(tda10023_attach, + &anysee_tda10023_config, &d->i2c_adap, 0x48); break; case ANYSEE_HW_507SI: /* 11 */ /* E30 S2 Plus */ - if (state->fe_id) - break; - /* enable DVB-S/S2 demod on IOD[0] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01); + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); if (ret) goto error; /* attach demod */ - adap->fe_adap[0].fe = dvb_attach(cx24116_attach, - &anysee_cx24116_config, &adap->dev->i2c_adap); + adap->fe[0] = dvb_attach(cx24116_attach, &anysee_cx24116_config, + &d->i2c_adap); break; case ANYSEE_HW_507FA: /* 15 */ @@ -748,84 +718,82 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) /* E30 C Plus */ /* enable tuner on IOE[4] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10); + ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 4), 0x10); if (ret) goto error; /* probe TDA18212 */ tmp = 0; - ret = i2c_transfer(&adap->dev->i2c_adap, msg, 2); + ret = i2c_transfer(&d->i2c_adap, msg, 2); if (ret == 2 && tmp == 0xc7) - deb_info("%s: TDA18212 found\n", __func__); + dev_dbg(&d->udev->dev, "%s: TDA18212 found\n", + __func__); else tmp = 0; /* disable tuner on IOE[4] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 4), 0x10); + ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 4), 0x10); if (ret) goto error; - if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0) { - /* disable DVB-T demod on IOD[0] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0), - 0x01); - if (ret) - goto error; + /* disable DVB-T demod on IOD[0] */ + ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 0), 0x01); + if (ret) + goto error; - /* enable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5), - 0x20); - if (ret) - goto error; + /* enable DVB-C demod on IOD[5] */ + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20); + if (ret) + goto error; - /* attach demod */ - if (tmp == 0xc7) { - /* TDA18212 config */ - adap->fe_adap[state->fe_id].fe = dvb_attach( - tda10023_attach, + /* attach demod */ + if (tmp == 0xc7) { + /* TDA18212 config */ + adap->fe[0] = dvb_attach(tda10023_attach, &anysee_tda10023_tda18212_config, - &adap->dev->i2c_adap, 0x48); - } else { - /* PLL config */ - adap->fe_adap[state->fe_id].fe = dvb_attach( - tda10023_attach, - &anysee_tda10023_config, - &adap->dev->i2c_adap, 0x48); - } + &d->i2c_adap, 0x48); + + /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ + if (adap->fe[0]) + adap->fe[0]->ops.i2c_gate_ctrl = + anysee_i2c_gate_ctrl; } else { - /* disable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5), - 0x20); - if (ret) - goto error; + /* PLL config */ + adap->fe[0] = dvb_attach(tda10023_attach, + &anysee_tda10023_config, + &d->i2c_adap, 0x48); + } - /* enable DVB-T demod on IOD[0] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), - 0x01); - if (ret) - goto error; + /* break out if first frontend attaching fails */ + if (!adap->fe[0]) + break; - /* attach demod */ - if (tmp == 0xc7) { - /* TDA18212 config */ - adap->fe_adap[state->fe_id].fe = dvb_attach( - zl10353_attach, - &anysee_zl10353_tda18212_config2, - &adap->dev->i2c_adap); - } else { - /* PLL config */ - adap->fe_adap[state->fe_id].fe = dvb_attach( - zl10353_attach, - &anysee_zl10353_config, - &adap->dev->i2c_adap); - } - } + /* disable DVB-C demod on IOD[5] */ + ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20); + if (ret) + goto error; - /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ + /* enable DVB-T demod on IOD[0] */ + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); + if (ret) + goto error; + + /* attach demod */ if (tmp == 0xc7) { - if (adap->fe_adap[state->fe_id].fe) - adap->fe_adap[state->fe_id].fe->ops.i2c_gate_ctrl = - anysee_i2c_gate_ctrl; + /* TDA18212 config */ + adap->fe[1] = dvb_attach(zl10353_attach, + &anysee_zl10353_tda18212_config2, + &d->i2c_adap); + + /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ + if (adap->fe[1]) + adap->fe[1]->ops.i2c_gate_ctrl = + anysee_i2c_gate_ctrl; + } else { + /* PLL config */ + adap->fe[1] = dvb_attach(zl10353_attach, + &anysee_zl10353_config, + &d->i2c_adap); } break; @@ -834,48 +802,47 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) /* E7 TC */ /* E7 PTC */ - if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0) { - /* disable DVB-T demod on IOD[6] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6), - 0x40); - if (ret) - goto error; + /* disable DVB-T demod on IOD[6] */ + ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 6), 0x40); + if (ret) + goto error; - /* enable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5), - 0x20); - if (ret) - goto error; + /* enable DVB-C demod on IOD[5] */ + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20); + if (ret) + goto error; - /* attach demod */ - adap->fe_adap[state->fe_id].fe = - dvb_attach(tda10023_attach, + /* attach demod */ + adap->fe[0] = dvb_attach(tda10023_attach, &anysee_tda10023_tda18212_config, - &adap->dev->i2c_adap, 0x48); - } else { - /* disable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5), - 0x20); - if (ret) - goto error; + &d->i2c_adap, 0x48); - /* enable DVB-T demod on IOD[6] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6), - 0x40); - if (ret) - goto error; + /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ + if (adap->fe[0]) + adap->fe[0]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl; + + /* break out if first frontend attaching fails */ + if (!adap->fe[0]) + break; + + /* disable DVB-C demod on IOD[5] */ + ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20); + if (ret) + goto error; - /* attach demod */ - adap->fe_adap[state->fe_id].fe = - dvb_attach(zl10353_attach, + /* enable DVB-T demod on IOD[6] */ + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 6), 0x40); + if (ret) + goto error; + + /* attach demod */ + adap->fe[1] = dvb_attach(zl10353_attach, &anysee_zl10353_tda18212_config, - &adap->dev->i2c_adap); - } + &d->i2c_adap); /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ - if (adap->fe_adap[state->fe_id].fe) - adap->fe_adap[state->fe_id].fe->ops.i2c_gate_ctrl = - anysee_i2c_gate_ctrl; + if (adap->fe[1]) + adap->fe[1]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl; state->has_ci = true; @@ -885,17 +852,14 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) /* E7 S2 */ /* E7 PS2 */ - if (state->fe_id) - break; - /* enable DVB-S/S2 demod on IOE[5] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20); + ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 5), 0x20); if (ret) goto error; /* attach demod */ - adap->fe_adap[0].fe = dvb_attach(stv0900_attach, - &anysee_stv0900_config, &adap->dev->i2c_adap, 0); + adap->fe[0] = dvb_attach(stv0900_attach, + &anysee_stv0900_config, &d->i2c_adap, 0); state->has_ci = true; @@ -903,28 +867,27 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) case ANYSEE_HW_508T2C: /* 20 */ /* E7 T2C */ - if (state->fe_id) - break; - /* enable DVB-T/T2/C demod on IOE[5] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20); + ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 5), 0x20); if (ret) goto error; /* attach demod */ - adap->fe_adap[state->fe_id].fe = dvb_attach(cxd2820r_attach, - &anysee_cxd2820r_config, &adap->dev->i2c_adap); + adap->fe[0] = dvb_attach(cxd2820r_attach, + &anysee_cxd2820r_config, &d->i2c_adap, NULL); state->has_ci = true; break; } - if (!adap->fe_adap[0].fe) { + if (!adap->fe[0]) { /* we have no frontend :-( */ ret = -ENODEV; - err("Unsupported Anysee version. " \ - "Please report the ."); + dev_err(&d->udev->dev, "%s: Unsupported Anysee version. " \ + "Please report the " \ + ".\n", + KBUILD_MODNAME); } error: return ret; @@ -932,44 +895,43 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) static int anysee_tuner_attach(struct dvb_usb_adapter *adap) { - struct anysee_state *state = adap->dev->priv; + struct anysee_state *state = adap_to_priv(adap); + struct dvb_usb_device *d = adap_to_d(adap); struct dvb_frontend *fe; int ret; - deb_info("%s: fe=%d\n", __func__, state->fe_id); + dev_dbg(&d->udev->dev, "%s:\n", __func__); switch (state->hw) { case ANYSEE_HW_507T: /* 2 */ /* E30 */ /* attach tuner */ - fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, - (0xc2 >> 1), NULL, DVB_PLL_THOMSON_DTT7579); + fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc2 >> 1), NULL, + DVB_PLL_THOMSON_DTT7579); break; case ANYSEE_HW_507CD: /* 6 */ /* E30 Plus */ /* attach tuner */ - fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, - (0xc2 >> 1), &adap->dev->i2c_adap, - DVB_PLL_THOMSON_DTT7579); + fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc2 >> 1), + &d->i2c_adap, DVB_PLL_THOMSON_DTT7579); break; case ANYSEE_HW_507DC: /* 10 */ /* E30 C Plus */ /* attach tuner */ - fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, - (0xc0 >> 1), &adap->dev->i2c_adap, - DVB_PLL_SAMSUNG_DTOS403IH102A); + fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc0 >> 1), + &d->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); break; case ANYSEE_HW_507SI: /* 11 */ /* E30 S2 Plus */ /* attach LNB controller */ - fe = dvb_attach(isl6423_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, &anysee_isl6423_config); + fe = dvb_attach(isl6423_attach, adap->fe[0], &d->i2c_adap, + &anysee_isl6423_config); break; case ANYSEE_HW_507FA: /* 15 */ @@ -980,15 +942,28 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) * fails attach old simple PLL. */ /* attach tuner */ - fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe, - &adap->dev->i2c_adap, &anysee_tda18212_config); - if (fe) + fe = dvb_attach(tda18212_attach, adap->fe[0], &d->i2c_adap, + &anysee_tda18212_config); + + if (fe && adap->fe[1]) { + /* attach tuner for 2nd FE */ + fe = dvb_attach(tda18212_attach, adap->fe[1], + &d->i2c_adap, &anysee_tda18212_config); + break; + } else if (fe) { break; + } /* attach tuner */ - fe = dvb_attach(dvb_pll_attach, adap->fe_adap[state->fe_id].fe, - (0xc0 >> 1), &adap->dev->i2c_adap, - DVB_PLL_SAMSUNG_DTOS403IH102A); + fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc0 >> 1), + &d->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); + + if (fe && adap->fe[1]) { + /* attach tuner for 2nd FE */ + fe = dvb_attach(dvb_pll_attach, adap->fe[0], + (0xc0 >> 1), &d->i2c_adap, + DVB_PLL_SAMSUNG_DTOS403IH102A); + } break; case ANYSEE_HW_508TC: /* 18 */ @@ -997,8 +972,14 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) /* E7 PTC */ /* attach tuner */ - fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe, - &adap->dev->i2c_adap, &anysee_tda18212_config); + fe = dvb_attach(tda18212_attach, adap->fe[0], &d->i2c_adap, + &anysee_tda18212_config); + + if (fe) { + /* attach tuner for 2nd FE */ + fe = dvb_attach(tda18212_attach, adap->fe[1], + &d->i2c_adap, &anysee_tda18212_config); + } break; case ANYSEE_HW_508S2: /* 19 */ @@ -1007,13 +988,13 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) /* E7 PS2 */ /* attach tuner */ - fe = dvb_attach(stv6110_attach, adap->fe_adap[0].fe, - &anysee_stv6110_config, &adap->dev->i2c_adap); + fe = dvb_attach(stv6110_attach, adap->fe[0], + &anysee_stv6110_config, &d->i2c_adap); if (fe) { /* attach LNB controller */ - fe = dvb_attach(isl6423_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, &anysee_isl6423_config); + fe = dvb_attach(isl6423_attach, adap->fe[0], + &d->i2c_adap, &anysee_isl6423_config); } break; @@ -1022,8 +1003,8 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) /* E7 T2C */ /* attach tuner */ - fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe, - &adap->dev->i2c_adap, &anysee_tda18212_config2); + fe = dvb_attach(tda18212_attach, adap->fe[0], &d->i2c_adap, + &anysee_tda18212_config2); break; default: @@ -1057,13 +1038,23 @@ static int anysee_rc_query(struct dvb_usb_device *d) return ret; if (ircode[0]) { - deb_rc("%s: key pressed %02x\n", __func__, ircode[1]); + dev_dbg(&d->udev->dev, "%s: key pressed %02x\n", __func__, + ircode[1]); rc_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0); } return 0; } +static int anysee_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) +{ + rc->allowed_protos = RC_TYPE_NEC; + rc->query = anysee_rc_query; + rc->interval = 250; /* windows driver uses 500ms */ + + return 0; +} + static int anysee_ci_read_attribute_mem(struct dvb_ca_en50221 *ci, int slot, int addr) { @@ -1126,7 +1117,7 @@ static int anysee_ci_slot_reset(struct dvb_ca_en50221 *ci, int slot) { struct dvb_usb_device *d = ci->data; int ret; - struct anysee_state *state = d->priv; + struct anysee_state *state = d_to_priv(d); state->ci_cam_ready = jiffies + msecs_to_jiffies(1000); @@ -1177,7 +1168,7 @@ static int anysee_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot, int open) { struct dvb_usb_device *d = ci->data; - struct anysee_state *state = d->priv; + struct anysee_state *state = d_to_priv(d); int ret; u8 tmp; @@ -1196,7 +1187,7 @@ static int anysee_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot, static int anysee_ci_init(struct dvb_usb_device *d) { - struct anysee_state *state = d->priv; + struct anysee_state *state = d_to_priv(d); int ret; state->ci.owner = THIS_MODULE; @@ -1226,15 +1217,17 @@ static int anysee_ci_init(struct dvb_usb_device *d) if (ret) return ret; + state->ci_attached = true; + return 0; } static void anysee_ci_release(struct dvb_usb_device *d) { - struct anysee_state *state = d->priv; + struct anysee_state *state = d_to_priv(d); /* detach CI */ - if (state->has_ci) + if (state->ci_attached) dvb_ca_en50221_release(&state->ci); return; @@ -1242,9 +1235,17 @@ static void anysee_ci_release(struct dvb_usb_device *d) static int anysee_init(struct dvb_usb_device *d) { - struct anysee_state *state = d->priv; + struct anysee_state *state = d_to_priv(d); int ret; + /* There is one interface with two alternate settings. + Alternate setting 0 is for bulk transfer. + Alternate setting 1 is for isochronous transfer. + We use bulk transfer (alternate setting 0). */ + ret = usb_set_interface(d->udev, 0, 0); + if (ret) + return ret; + /* LED light */ ret = anysee_led_ctrl(d, 0x01, 0x03); if (ret) @@ -1258,148 +1259,68 @@ static int anysee_init(struct dvb_usb_device *d) /* attach CI */ if (state->has_ci) { ret = anysee_ci_init(d); - if (ret) { - state->has_ci = false; + if (ret) return ret; - } } return 0; } -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties anysee_properties; - -static int anysee_probe(struct usb_interface *intf, - const struct usb_device_id *id) +static void anysee_exit(struct dvb_usb_device *d) { - struct dvb_usb_device *d; - struct usb_host_interface *alt; - int ret; - - /* There is one interface with two alternate settings. - Alternate setting 0 is for bulk transfer. - Alternate setting 1 is for isochronous transfer. - We use bulk transfer (alternate setting 0). */ - if (intf->num_altsetting < 1) - return -ENODEV; - - /* - * Anysee is always warm (its USB-bridge, Cypress FX2, uploads - * firmware from eeprom). If dvb_usb_device_init() succeeds that - * means d is a valid pointer. - */ - ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d, - adapter_nr); - if (ret) - return ret; - - alt = usb_altnum_to_altsetting(intf, 0); - if (alt == NULL) { - deb_info("%s: no alt found!\n", __func__); - return -ENODEV; - } - - ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, - alt->desc.bAlternateSetting); - if (ret) - return ret; - - return anysee_init(d); + return anysee_ci_release(d); } -static void anysee_disconnect(struct usb_interface *intf) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - - anysee_ci_release(d); - dvb_usb_device_exit(intf); - - return; -} - -static struct usb_device_id anysee_table[] = { - { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) }, - { USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, anysee_table); - -static struct dvb_usb_device_properties anysee_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties anysee_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct anysee_state), - .usb_ctrl = DEVICE_SPECIFIC, + .generic_bulk_ctrl_endpoint = 0x01, + .generic_bulk_ctrl_endpoint_response = 0x81, - .size_of_priv = sizeof(struct anysee_state), + .i2c_algo = &anysee_i2c_algo, + .read_config = anysee_read_config, + .frontend_attach = anysee_frontend_attach, + .tuner_attach = anysee_tuner_attach, + .init = anysee_init, + .get_rc_config = anysee_get_rc_config, + .frontend_ctrl = anysee_frontend_ctrl, + .streaming_ctrl = anysee_streaming_ctrl, + .exit = anysee_exit, .num_adapters = 1, .adapter = { { - .num_frontends = 2, - .frontend_ctrl = anysee_frontend_ctrl, - .fe = { { - .streaming_ctrl = anysee_streaming_ctrl, - .frontend_attach = anysee_frontend_attach, - .tuner_attach = anysee_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = (16*512), - } - } - }, - }, { - .streaming_ctrl = anysee_streaming_ctrl, - .frontend_attach = anysee_frontend_attach, - .tuner_attach = anysee_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = (16*512), - } - } - }, - } }, + .stream = DVB_USB_STREAM_BULK(0x82, 8, 16 * 512), } - }, - - .rc.core = { - .rc_codes = RC_MAP_ANYSEE, - .protocol = RC_TYPE_OTHER, - .module_name = "anysee", - .rc_query = anysee_rc_query, - .rc_interval = 250, /* windows driver uses 500ms */ - }, - - .i2c_algo = &anysee_i2c_algo, - - .generic_bulk_ctrl_endpoint = 1, - - .num_device_descs = 1, - .devices = { - { - .name = "Anysee DVB USB2.0", - .cold_ids = {NULL}, - .warm_ids = {&anysee_table[0], - &anysee_table[1], NULL}, - }, } }; -static struct usb_driver anysee_driver = { - .name = "dvb_usb_anysee", - .probe = anysee_probe, - .disconnect = anysee_disconnect, - .id_table = anysee_table, +static const struct usb_device_id anysee_id_table[] = { + { DVB_USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE, + &anysee_props, "Anysee", RC_MAP_ANYSEE) }, + { DVB_USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE, + &anysee_props, "Anysee", RC_MAP_ANYSEE) }, + { } +}; +MODULE_DEVICE_TABLE(usb, anysee_id_table); + +static struct usb_driver anysee_usb_driver = { + .name = KBUILD_MODNAME, + .id_table = anysee_id_table, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .reset_resume = dvb_usbv2_reset_resume, + .no_dynamic_id = 1, + .soft_unbind = 1, }; -module_usb_driver(anysee_driver); +module_usb_driver(anysee_usb_driver); MODULE_AUTHOR("Antti Palosaari "); MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0"); diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/usb/dvb-usb-v2/anysee.h similarity index 97% rename from drivers/media/dvb/dvb-usb/anysee.h rename to drivers/media/usb/dvb-usb-v2/anysee.h index 8ac8794315401d06a087dcf4614444ce98c8d12b..c1a4273f14ff8075f4e881fca7243b8197d4cc1a 100644 --- a/drivers/media/dvb/dvb-usb/anysee.h +++ b/drivers/media/usb/dvb-usb-v2/anysee.h @@ -35,16 +35,9 @@ #define _DVB_USB_ANYSEE_H_ #define DVB_USB_LOG_PREFIX "anysee" -#include "dvb-usb.h" +#include "dvb_usb.h" #include "dvb_ca_en50221.h" -#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args) -#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args) -#define deb_rc(args...) dprintk(dvb_usb_anysee_debug, 0x04, args) -#define deb_reg(args...) dprintk(dvb_usb_anysee_debug, 0x08, args) -#define deb_i2c(args...) dprintk(dvb_usb_anysee_debug, 0x10, args) -#define deb_fw(args...) dprintk(dvb_usb_anysee_debug, 0x20, args) - enum cmd { CMD_I2C_READ = 0x33, CMD_I2C_WRITE = 0x31, @@ -63,6 +56,7 @@ struct anysee_state { u8 seq; u8 fe_id:1; /* frondend ID */ u8 has_ci:1; + u8 ci_attached:1; struct dvb_ca_en50221 ci; unsigned long ci_cam_ready; /* jiffies */ }; diff --git a/drivers/media/dvb/dvb-usb/au6610.c b/drivers/media/usb/dvb-usb-v2/au6610.c similarity index 64% rename from drivers/media/dvb/dvb-usb/au6610.c rename to drivers/media/usb/dvb-usb-v2/au6610.c index 16210c060302a6114c912bf67d8c7034f2487194..ae6a671b7fd55dae414501628918d4d00f4a5336 100644 --- a/drivers/media/dvb/dvb-usb/au6610.c +++ b/drivers/media/usb/dvb-usb-v2/au6610.c @@ -22,10 +22,6 @@ #include "zl10353.h" #include "qt1010.h" -/* debug */ -static int dvb_usb_au6610_debug; -module_param_named(debug, dvb_usb_au6610_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, @@ -52,7 +48,8 @@ static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, index += wbuf[1]; break; default: - warn("wlen = %x, aborting.", wlen); + dev_err(&d->udev->dev, "%s: wlen=%d, aborting\n", + KBUILD_MODNAME, wlen); ret = -EINVAL; goto error; } @@ -60,6 +57,11 @@ static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation, USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, usb_buf, 6, AU6610_USB_TIMEOUT); + + dvb_usb_dbg_usb_control_msg(d->udev, operation, + (USB_TYPE_VENDOR|USB_DIR_IN), addr << 1, index, + usb_buf, 6); + if (ret < 0) goto error; @@ -140,9 +142,9 @@ static struct zl10353_config au6610_zl10353_config = { static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap) { - adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &au6610_zl10353_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe == NULL) + adap->fe[0] = dvb_attach(zl10353_attach, &au6610_zl10353_config, + &adap_to_d(adap)->i2c_adap); + if (adap->fe[0] == NULL) return -ENODEV; return 0; @@ -154,94 +156,53 @@ static struct qt1010_config au6610_qt1010_config = { static int au6610_qt1010_tuner_attach(struct dvb_usb_adapter *adap) { - return dvb_attach(qt1010_attach, - adap->fe_adap[0].fe, &adap->dev->i2c_adap, - &au6610_qt1010_config) == NULL ? -ENODEV : 0; + return dvb_attach(qt1010_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + &au6610_qt1010_config) == NULL ? -ENODEV : 0; } -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties au6610_properties; - -static int au6610_probe(struct usb_interface *intf, - const struct usb_device_id *id) +static int au6610_init(struct dvb_usb_device *d) { - struct dvb_usb_device *d; - struct usb_host_interface *alt; - int ret; - - if (intf->num_altsetting < AU6610_ALTSETTING_COUNT) - return -ENODEV; - - ret = dvb_usb_device_init(intf, &au6610_properties, THIS_MODULE, &d, - adapter_nr); - if (ret == 0) { - alt = usb_altnum_to_altsetting(intf, AU6610_ALTSETTING); - - if (alt == NULL) { - deb_info("%s: no alt found!\n", __func__); - return -ENODEV; - } - ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, - alt->desc.bAlternateSetting); - } - - return ret; + /* TODO: this functionality belongs likely to the streaming control */ + /* bInterfaceNumber 0, bAlternateSetting 5 */ + return usb_set_interface(d->udev, 0, 5); } -static struct usb_device_id au6610_table [] = { - { USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, au6610_table); +static struct dvb_usb_device_properties au6610_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, -static struct dvb_usb_device_properties au6610_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - - .size_of_priv = 0, + .i2c_algo = &au6610_i2c_algo, + .frontend_attach = au6610_zl10353_frontend_attach, + .tuner_attach = au6610_qt1010_tuner_attach, + .init = au6610_init, .num_adapters = 1, .adapter = { { - .num_frontends = 1, - .fe = {{ - .frontend_attach = au6610_zl10353_frontend_attach, - .tuner_attach = au6610_qt1010_tuner_attach, - - .stream = { - .type = USB_ISOC, - .count = 5, - .endpoint = 0x82, - .u = { - .isoc = { - .framesperurb = 40, - .framesize = 942, - .interval = 1, - } - } - }, - }}, - } + .stream = DVB_USB_STREAM_ISOC(0x82, 5, 40, 942, 1), + }, }, +}; - .i2c_algo = &au6610_i2c_algo, - - .num_device_descs = 1, - .devices = { - { - .name = "Sigmatek DVB-110 DVB-T USB2.0", - .cold_ids = {NULL}, - .warm_ids = {&au6610_table[0], NULL}, - }, - } +static const struct usb_device_id au6610_id_table[] = { + { DVB_USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110, + &au6610_props, "Sigmatek DVB-110", NULL) }, + { } }; +MODULE_DEVICE_TABLE(usb, au6610_id_table); static struct usb_driver au6610_driver = { - .name = "dvb_usb_au6610", - .probe = au6610_probe, - .disconnect = dvb_usb_device_exit, - .id_table = au6610_table, + .name = KBUILD_MODNAME, + .id_table = au6610_id_table, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .reset_resume = dvb_usbv2_reset_resume, + .no_dynamic_id = 1, + .soft_unbind = 1, }; module_usb_driver(au6610_driver); diff --git a/drivers/media/dvb/dvb-usb/au6610.h b/drivers/media/usb/dvb-usb-v2/au6610.h similarity index 80% rename from drivers/media/dvb/dvb-usb/au6610.h rename to drivers/media/usb/dvb-usb-v2/au6610.h index 7849abe2c61433c685c58dd231f27c79575b7c9b..ea337bfc00b111aae5de96e85f370fddefa73cf2 100644 --- a/drivers/media/dvb/dvb-usb/au6610.h +++ b/drivers/media/usb/dvb-usb-v2/au6610.h @@ -18,13 +18,9 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef _DVB_USB_AU6610_H_ -#define _DVB_USB_AU6610_H_ - -#define DVB_USB_LOG_PREFIX "au6610" -#include "dvb-usb.h" - -#define deb_info(args...) dprintk(dvb_usb_au6610_debug, 0x01, args) +#ifndef AU6610_H +#define AU6610_H +#include "dvb_usb.h" #define AU6610_REQ_I2C_WRITE 0x14 #define AU6610_REQ_I2C_READ 0x13 @@ -33,7 +29,4 @@ #define AU6610_USB_TIMEOUT 1000 -#define AU6610_ALTSETTING_COUNT 6 -#define AU6610_ALTSETTING 5 - #endif diff --git a/drivers/media/dvb/dvb-usb/az6007.c b/drivers/media/usb/dvb-usb-v2/az6007.c similarity index 63% rename from drivers/media/dvb/dvb-usb/az6007.c rename to drivers/media/usb/dvb-usb-v2/az6007.c index 86861e6f86d23053ebe990aa58b24e7d377d7d45..54f1221d930df3c5eb0d554c4d56da63cc06583d 100644 --- a/drivers/media/dvb/dvb-usb/az6007.c +++ b/drivers/media/usb/dvb-usb-v2/az6007.c @@ -7,9 +7,9 @@ * http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz * The original driver's license is GPL, as declared with MODULE_LICENSE() * - * Copyright (c) 2010-2011 Mauro Carvalho Chehab + * Copyright (c) 2010-2012 Mauro Carvalho Chehab * Driver modified by in order to work with upstream drxk driver, and - * tons of bugs got fixed. + * tons of bugs got fixed, and converted to use dvb-usb-v2. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,20 +24,14 @@ #include "drxk.h" #include "mt2063.h" #include "dvb_ca_en50221.h" +#include "dvb_usb.h" +#include "cypress_firmware.h" -#define DVB_USB_LOG_PREFIX "az6007" -#include "dvb-usb.h" +#define AZ6007_FIRMWARE "dvb-usb-terratec-h7-az6007.fw" -/* debug */ -int dvb_usb_az6007_debug; -module_param_named(debug, dvb_usb_az6007_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." - DVB_USB_DEBUG_STATUS); - -#define deb_info(args...) dprintk(dvb_usb_az6007_debug, 0x01, args) -#define deb_xfer(args...) dprintk(dvb_usb_az6007_debug, 0x02, args) -#define deb_rc(args...) dprintk(dvb_usb_az6007_debug, 0x04, args) -#define deb_fe(args...) dprintk(dvb_usb_az6007_debug, 0x08, args) +static int az6007_xfer_debug; +module_param_named(xfer_debug, az6007_xfer_debug, int, 0644); +MODULE_PARM_DESC(xfer_debug, "Enable xfer debug"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -70,23 +64,19 @@ static struct drxk_config terratec_h7_drxk = { .no_i2c_bridge = false, .chunk_size = 64, .mpeg_out_clk_strength = 0x02, + .qam_demod_parameter_count = 2, .microcode_name = "dvb-usb-terratec-h7-drxk.fw", }; static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) { + struct az6007_device_state *st = fe_to_priv(fe); struct dvb_usb_adapter *adap = fe->sec_priv; - struct az6007_device_state *st; int status = 0; - deb_info("%s: %s\n", __func__, enable ? "enable" : "disable"); - - if (!adap) - return -EINVAL; - - st = adap->dev->priv; + pr_debug("%s: %s\n", __func__, enable ? "enable" : "disable"); - if (!st) + if (!adap || !st) return -EINVAL; if (enable) @@ -113,13 +103,16 @@ static int __az6007_read(struct usb_device *udev, u8 req, u16 value, USB_TYPE_VENDOR | USB_DIR_IN, value, index, b, blen, 5000); if (ret < 0) { - warn("usb read operation failed. (%d)", ret); + pr_warn("usb read operation failed. (%d)\n", ret); return -EIO; } - deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, - index); - debug_dump(b, blen, deb_xfer); + if (az6007_xfer_debug) { + printk(KERN_DEBUG "az6007: IN req: %02x, value: %04x, index: %04x\n", + req, value, index); + print_hex_dump_bytes("az6007: payload: ", + DUMP_PREFIX_NONE, b, blen); + } return ret; } @@ -145,13 +138,16 @@ static int __az6007_write(struct usb_device *udev, u8 req, u16 value, { int ret; - deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, - index); - debug_dump(b, blen, deb_xfer); + if (az6007_xfer_debug) { + printk(KERN_DEBUG "az6007: OUT req: %02x, value: %04x, index: %04x\n", + req, value, index); + print_hex_dump_bytes("az6007: payload: ", + DUMP_PREFIX_NONE, b, blen); + } if (blen > 64) { - err("az6007: tried to write %d bytes, but I2C max size is 64 bytes\n", - blen); + pr_err("az6007: tried to write %d bytes, but I2C max size is 64 bytes\n", + blen); return -EOPNOTSUPP; } @@ -161,7 +157,7 @@ static int __az6007_write(struct usb_device *udev, u8 req, u16 value, USB_TYPE_VENDOR | USB_DIR_OUT, value, index, b, blen, 5000); if (ret != blen) { - err("usb write operation failed. (%d)", ret); + pr_err("usb write operation failed. (%d)\n", ret); return -EIO; } @@ -184,11 +180,11 @@ static int az6007_write(struct dvb_usb_device *d, u8 req, u16 value, return ret; } -static int az6007_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +static int az6007_streaming_ctrl(struct dvb_frontend *fe, int onoff) { - struct dvb_usb_device *d = adap->dev; + struct dvb_usb_device *d = fe_to_d(fe); - deb_info("%s: %s", __func__, onoff ? "enable" : "disable"); + pr_debug("%s: %s\n", __func__, onoff ? "enable" : "disable"); return az6007_write(d, 0xbc, onoff, 0, NULL, 0); } @@ -196,7 +192,7 @@ static int az6007_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) /* remote control stuff (does not work with my box) */ static int az6007_rc_query(struct dvb_usb_device *d) { - struct az6007_device_state *st = d->priv; + struct az6007_device_state *st = d_to_priv(d); unsigned code = 0; az6007_read(d, AZ6007_READ_IR, 0, 0, st->data, 10); @@ -224,7 +220,7 @@ static int az6007_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, int address) { struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + struct az6007_device_state *state = d_to_priv(d); int ret; u8 req; @@ -249,7 +245,7 @@ static int az6007_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, ret = az6007_read(d, req, value, index, b, blen); if (ret < 0) { - warn("usb in operation failed. (%d)", ret); + pr_warn("usb in operation failed. (%d)\n", ret); ret = -EINVAL; } else { ret = b[0]; @@ -266,7 +262,7 @@ static int az6007_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, u8 value) { struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + struct az6007_device_state *state = d_to_priv(d); int ret; u8 req; @@ -274,7 +270,7 @@ static int az6007_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, u16 index; int blen; - deb_info("%s %d", __func__, slot); + pr_debug("%s(), slot %d\n", __func__, slot); if (slot != 0) return -EINVAL; @@ -286,7 +282,7 @@ static int az6007_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, ret = az6007_write(d, req, value1, index, NULL, blen); if (ret != 0) - warn("usb out operation failed. (%d)", ret); + pr_warn("usb out operation failed. (%d)\n", ret); mutex_unlock(&state->ca_mutex); return ret; @@ -297,7 +293,7 @@ static int az6007_ci_read_cam_control(struct dvb_ca_en50221 *ca, u8 address) { struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + struct az6007_device_state *state = d_to_priv(d); int ret; u8 req; @@ -322,14 +318,14 @@ static int az6007_ci_read_cam_control(struct dvb_ca_en50221 *ca, ret = az6007_read(d, req, value, index, b, blen); if (ret < 0) { - warn("usb in operation failed. (%d)", ret); + pr_warn("usb in operation failed. (%d)\n", ret); ret = -EINVAL; } else { if (b[0] == 0) - warn("Read CI IO error"); + pr_warn("Read CI IO error\n"); ret = b[1]; - deb_info("read cam data = %x from 0x%x", b[1], value); + pr_debug("read cam data = %x from 0x%x\n", b[1], value); } mutex_unlock(&state->ca_mutex); @@ -343,7 +339,7 @@ static int az6007_ci_write_cam_control(struct dvb_ca_en50221 *ca, u8 value) { struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + struct az6007_device_state *state = d_to_priv(d); int ret; u8 req; @@ -362,7 +358,7 @@ static int az6007_ci_write_cam_control(struct dvb_ca_en50221 *ca, ret = az6007_write(d, req, value1, index, NULL, blen); if (ret != 0) { - warn("usb out operation failed. (%d)", ret); + pr_warn("usb out operation failed. (%d)\n", ret); goto failed; } @@ -393,7 +389,7 @@ static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot) ret = az6007_read(d, req, value, index, b, blen); if (ret < 0) { - warn("usb in operation failed. (%d)", ret); + pr_warn("usb in operation failed. (%d)\n", ret); ret = -EIO; } else{ ret = b[0]; @@ -405,7 +401,7 @@ static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot) static int az6007_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) { struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + struct az6007_device_state *state = d_to_priv(d); int ret, i; u8 req; @@ -422,7 +418,7 @@ static int az6007_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) ret = az6007_write(d, req, value, index, NULL, blen); if (ret != 0) { - warn("usb out operation failed. (%d)", ret); + pr_warn("usb out operation failed. (%d)\n", ret); goto failed; } @@ -434,7 +430,7 @@ static int az6007_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) ret = az6007_write(d, req, value, index, NULL, blen); if (ret != 0) { - warn("usb out operation failed. (%d)", ret); + pr_warn("usb out operation failed. (%d)\n", ret); goto failed; } @@ -442,7 +438,7 @@ static int az6007_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) msleep(100); if (CI_CamReady(ca, slot)) { - deb_info("CAM Ready"); + pr_debug("CAM Ready\n"); break; } } @@ -461,7 +457,7 @@ static int az6007_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) static int az6007_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) { struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + struct az6007_device_state *state = d_to_priv(d); int ret; u8 req; @@ -469,7 +465,7 @@ static int az6007_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) u16 index; int blen; - deb_info("%s", __func__); + pr_debug("%s()\n", __func__); mutex_lock(&state->ca_mutex); req = 0xC7; value = 1; @@ -478,7 +474,7 @@ static int az6007_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) ret = az6007_write(d, req, value, index, NULL, blen); if (ret != 0) { - warn("usb out operation failed. (%d)", ret); + pr_warn("usb out operation failed. (%d)\n", ret); goto failed; } @@ -490,7 +486,7 @@ static int az6007_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) static int az6007_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) { struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + struct az6007_device_state *state = d_to_priv(d); int ret; u8 req; u16 value; @@ -510,7 +506,7 @@ static int az6007_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int o ret = az6007_read(d, req, value, index, b, blen); if (ret < 0) { - warn("usb in operation failed. (%d)", ret); + pr_warn("usb in operation failed. (%d)\n", ret); ret = -EIO; } else ret = 0; @@ -530,12 +526,12 @@ static void az6007_ci_uninit(struct dvb_usb_device *d) { struct az6007_device_state *state; - deb_info("%s", __func__); + pr_debug("%s()\n", __func__); if (NULL == d) return; - state = (struct az6007_device_state *)d->priv; + state = d_to_priv(d); if (NULL == state) return; @@ -548,16 +544,15 @@ static void az6007_ci_uninit(struct dvb_usb_device *d) } -static int az6007_ci_init(struct dvb_usb_adapter *a) +static int az6007_ci_init(struct dvb_usb_adapter *adap) { - struct dvb_usb_device *d = a->dev; - struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + struct dvb_usb_device *d = adap_to_d(adap); + struct az6007_device_state *state = adap_to_priv(adap); int ret; - deb_info("%s", __func__); + pr_debug("%s()\n", __func__); mutex_init(&state->ca_mutex); - state->ca.owner = THIS_MODULE; state->ca.read_attribute_mem = az6007_ci_read_attribute_mem; state->ca.write_attribute_mem = az6007_ci_write_attribute_mem; @@ -569,49 +564,51 @@ static int az6007_ci_init(struct dvb_usb_adapter *a) state->ca.poll_slot_status = az6007_ci_poll_slot_status; state->ca.data = d; - ret = dvb_ca_en50221_init(&a->dvb_adap, + ret = dvb_ca_en50221_init(&adap->dvb_adap, &state->ca, 0, /* flags */ 1);/* n_slots */ if (ret != 0) { - err("Cannot initialize CI: Error %d.", ret); + pr_err("Cannot initialize CI: Error %d.\n", ret); memset(&state->ca, 0, sizeof(state->ca)); return ret; } - deb_info("CI initialized."); + pr_debug("CI initialized.\n"); return 0; } -static int az6007_read_mac_addr(struct dvb_usb_device *d, u8 mac[6]) +static int az6007_read_mac_addr(struct dvb_usb_adapter *adap, u8 mac[6]) { - struct az6007_device_state *st = d->priv; + struct dvb_usb_device *d = adap_to_d(adap); + struct az6007_device_state *st = adap_to_priv(adap); int ret; ret = az6007_read(d, AZ6007_READ_DATA, 6, 0, st->data, 6); memcpy(mac, st->data, 6); if (ret > 0) - deb_info("%s: mac is %pM\n", __func__, mac); + pr_debug("%s: mac is %pM\n", __func__, mac); return ret; } static int az6007_frontend_attach(struct dvb_usb_adapter *adap) { - struct az6007_device_state *st = adap->dev->priv; + struct az6007_device_state *st = adap_to_priv(adap); + struct dvb_usb_device *d = adap_to_d(adap); - deb_info("attaching demod drxk"); + pr_debug("attaching demod drxk\n"); - adap->fe_adap[0].fe = dvb_attach(drxk_attach, &terratec_h7_drxk, - &adap->dev->i2c_adap); - if (!adap->fe_adap[0].fe) + adap->fe[0] = dvb_attach(drxk_attach, &terratec_h7_drxk, + &d->i2c_adap); + if (!adap->fe[0]) return -EINVAL; - adap->fe_adap[0].fe->sec_priv = adap; - st->gate_ctrl = adap->fe_adap[0].fe->ops.i2c_gate_ctrl; - adap->fe_adap[0].fe->ops.i2c_gate_ctrl = drxk_gate_ctrl; + adap->fe[0]->sec_priv = adap; + st->gate_ctrl = adap->fe[0]->ops.i2c_gate_ctrl; + adap->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl; az6007_ci_init(adap); @@ -620,31 +617,33 @@ static int az6007_frontend_attach(struct dvb_usb_adapter *adap) static int az6007_tuner_attach(struct dvb_usb_adapter *adap) { - deb_info("attaching tuner mt2063"); + struct dvb_usb_device *d = adap_to_d(adap); + + pr_debug("attaching tuner mt2063\n"); /* Attach mt2063 to DVB-C frontend */ - if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) - adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 1); - if (!dvb_attach(mt2063_attach, adap->fe_adap[0].fe, + if (adap->fe[0]->ops.i2c_gate_ctrl) + adap->fe[0]->ops.i2c_gate_ctrl(adap->fe[0], 1); + if (!dvb_attach(mt2063_attach, adap->fe[0], &az6007_mt2063_config, - &adap->dev->i2c_adap)) + &d->i2c_adap)) return -EINVAL; - if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) - adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 0); + if (adap->fe[0]->ops.i2c_gate_ctrl) + adap->fe[0]->ops.i2c_gate_ctrl(adap->fe[0], 0); return 0; } -int az6007_power_ctrl(struct dvb_usb_device *d, int onoff) +static int az6007_power_ctrl(struct dvb_usb_device *d, int onoff) { - struct az6007_device_state *st = d->priv; + struct az6007_device_state *state = d_to_priv(d); int ret; - deb_info("%s()\n", __func__); + pr_debug("%s()\n", __func__); - if (!st->warm) { - mutex_init(&st->mutex); + if (!state->warm) { + mutex_init(&state->mutex); ret = az6007_write(d, AZ6007_POWER, 0, 2, NULL, 0); if (ret < 0) @@ -675,7 +674,7 @@ int az6007_power_ctrl(struct dvb_usb_device *d, int onoff) if (ret < 0) return ret; - st->warm = true; + state->warm = true; return 0; } @@ -694,7 +693,7 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct az6007_device_state *st = d->priv; + struct az6007_device_state *st = d_to_priv(d); int i, j, len; int ret = 0; u16 index; @@ -709,7 +708,7 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], addr = msgs[i].addr << 1; if (((i + 1) < num) && (msgs[i].len == 1) - && (!msgs[i].flags & I2C_M_RD) + && ((msgs[i].flags & I2C_M_RD) != I2C_M_RD) && (msgs[i + 1].flags & I2C_M_RD) && (msgs[i].addr == msgs[i + 1].addr)) { /* @@ -717,9 +716,8 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], * the first xfer has just 1 byte length. * Need to join both into one operation */ - if (dvb_usb_az6007_debug & 2) - printk(KERN_DEBUG - "az6007 I2C xfer write+read addr=0x%x len=%d/%d: ", + if (az6007_xfer_debug) + printk(KERN_DEBUG "az6007: I2C W/R addr=0x%x len=%d/%d\n", addr, msgs[i].len, msgs[i + 1].len); req = AZ6007_I2C_RD; index = msgs[i].buf[0]; @@ -729,42 +727,29 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], ret = __az6007_read(d->udev, req, value, index, st->data, length); if (ret >= len) { - for (j = 0; j < len; j++) { + for (j = 0; j < len; j++) msgs[i + 1].buf[j] = st->data[j + 5]; - if (dvb_usb_az6007_debug & 2) - printk(KERN_CONT - "0x%02x ", - msgs[i + 1].buf[j]); - } } else ret = -EIO; i++; } else if (!(msgs[i].flags & I2C_M_RD)) { /* write bytes */ - if (dvb_usb_az6007_debug & 2) - printk(KERN_DEBUG - "az6007 I2C xfer write addr=0x%x len=%d: ", + if (az6007_xfer_debug) + printk(KERN_DEBUG "az6007: I2C W addr=0x%x len=%d\n", addr, msgs[i].len); req = AZ6007_I2C_WR; index = msgs[i].buf[0]; value = addr | (1 << 8); length = msgs[i].len - 1; len = msgs[i].len - 1; - if (dvb_usb_az6007_debug & 2) - printk(KERN_CONT "(0x%02x) ", msgs[i].buf[0]); - for (j = 0; j < len; j++) { + for (j = 0; j < len; j++) st->data[j] = msgs[i].buf[j + 1]; - if (dvb_usb_az6007_debug & 2) - printk(KERN_CONT "0x%02x ", - st->data[j]); - } ret = __az6007_write(d->udev, req, value, index, st->data, length); } else { /* read bytes */ - if (dvb_usb_az6007_debug & 2) - printk(KERN_DEBUG - "az6007 I2C xfer read addr=0x%x len=%d: ", + if (az6007_xfer_debug) + printk(KERN_DEBUG "az6007: I2C R addr=0x%x len=%d\n", addr, msgs[i].len); req = AZ6007_I2C_RD; index = msgs[i].buf[0]; @@ -773,15 +758,9 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], len = msgs[i].len; ret = __az6007_read(d->udev, req, value, index, st->data, length); - for (j = 0; j < len; j++) { + for (j = 0; j < len; j++) msgs[i].buf[j] = st->data[j + 5]; - if (dvb_usb_az6007_debug & 2) - printk(KERN_CONT - "0x%02x ", st->data[j + 5]); - } } - if (dvb_usb_az6007_debug & 2) - printk(KERN_CONT "\n"); if (ret < 0) goto err; } @@ -789,7 +768,7 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], mutex_unlock(&st->mutex); if (ret < 0) { - info("%s ERROR: %i", __func__, ret); + pr_info("%s ERROR: %i\n", __func__, ret); return ret; } return num; @@ -805,151 +784,136 @@ static struct i2c_algorithm az6007_i2c_algo = { .functionality = az6007_i2c_func, }; -int az6007_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, int *cold) +static int az6007_identify_state(struct dvb_usb_device *d, const char **name) { int ret; u8 *mac; + pr_debug("Identifying az6007 state\n"); + mac = kmalloc(6, GFP_ATOMIC); if (!mac) return -ENOMEM; /* Try to read the mac address */ - ret = __az6007_read(udev, AZ6007_READ_DATA, 6, 0, mac, 6); + ret = __az6007_read(d->udev, AZ6007_READ_DATA, 6, 0, mac, 6); if (ret == 6) - *cold = 0; + ret = WARM; else - *cold = 1; + ret = COLD; kfree(mac); - if (*cold) { - __az6007_write(udev, 0x09, 1, 0, NULL, 0); - __az6007_write(udev, 0x00, 0, 0, NULL, 0); - __az6007_write(udev, 0x00, 0, 0, NULL, 0); + if (ret == COLD) { + __az6007_write(d->udev, 0x09, 1, 0, NULL, 0); + __az6007_write(d->udev, 0x00, 0, 0, NULL, 0); + __az6007_write(d->udev, 0x00, 0, 0, NULL, 0); } - deb_info("Device is on %s state\n", *cold ? "warm" : "cold"); - return 0; + pr_debug("Device is on %s state\n", + ret == WARM ? "warm" : "cold"); + return ret; } -static struct dvb_usb_device_properties az6007_properties; - static void az6007_usb_disconnect(struct usb_interface *intf) { struct dvb_usb_device *d = usb_get_intfdata(intf); az6007_ci_uninit(d); - dvb_usb_device_exit(intf); + dvb_usbv2_disconnect(intf); } -static int az6007_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) +static int az6007_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) { - return dvb_usb_device_init(intf, &az6007_properties, - THIS_MODULE, NULL, adapter_nr); + pr_debug("Getting az6007 Remote Control properties\n"); + + rc->allowed_protos = RC_TYPE_NEC; + rc->query = az6007_rc_query; + rc->interval = 400; + + return 0; } -static struct usb_device_id az6007_usb_table[] = { - {USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_6007)}, - {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7)}, - {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7_2)}, - {0}, -}; +static int az6007_download_firmware(struct dvb_usb_device *d, + const struct firmware *fw) +{ + pr_debug("Loading az6007 firmware\n"); -MODULE_DEVICE_TABLE(usb, az6007_usb_table); + return usbv2_cypress_load_firmware(d->udev, fw, CYPRESS_FX2); +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties az6007_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .firmware = AZ6007_FIRMWARE, -static struct dvb_usb_device_properties az6007_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-terratec-h7-az6007.fw", - .no_reconnect = 1, + .adapter_nr = adapter_nr, .size_of_priv = sizeof(struct az6007_device_state), + .i2c_algo = &az6007_i2c_algo, + .tuner_attach = az6007_tuner_attach, + .frontend_attach = az6007_frontend_attach, + .streaming_ctrl = az6007_streaming_ctrl, + .get_rc_config = az6007_get_rc_config, + .read_mac_address = az6007_read_mac_addr, + .download_firmware = az6007_download_firmware, .identify_state = az6007_identify_state, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = az6007_streaming_ctrl, - .tuner_attach = az6007_tuner_attach, - .frontend_attach = az6007_frontend_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 10, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - } } - } }, - .power_ctrl = az6007_power_ctrl, - .read_mac_address = az6007_read_mac_addr, - - .rc.core = { - .rc_interval = 400, - .rc_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, - .module_name = "az6007", - .rc_query = az6007_rc_query, - .allowed_protos = RC_TYPE_NEC, - }, - .i2c_algo = &az6007_i2c_algo, - - .num_device_descs = 2, - .devices = { - { .name = "AzureWave DTV StarBox DVB-T/C USB2.0 (az6007)", - .cold_ids = { &az6007_usb_table[0], NULL }, - .warm_ids = { NULL }, - }, - { .name = "TerraTec DTV StarBox DVB-T/C USB2.0 (az6007)", - .cold_ids = { &az6007_usb_table[1], &az6007_usb_table[2], NULL }, - .warm_ids = { NULL }, - }, - { NULL }, + .power_ctrl = az6007_power_ctrl, + .num_adapters = 1, + .adapter = { + { .stream = DVB_USB_STREAM_BULK(0x02, 10, 4096), } } }; -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver az6007_usb_driver = { - .name = "dvb_usb_az6007", - .probe = az6007_usb_probe, - .disconnect = az6007_usb_disconnect, - .id_table = az6007_usb_table, +static struct usb_device_id az6007_usb_table[] = { + {DVB_USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_6007, + &az6007_props, "Azurewave 6007", RC_MAP_EMPTY)}, + {DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7, + &az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)}, + {DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7_2, + &az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)}, + {0}, }; -/* module stuff */ -static int __init az6007_usb_module_init(void) -{ - int result; - deb_info("az6007 usb module init\n"); +MODULE_DEVICE_TABLE(usb, az6007_usb_table); - result = usb_register(&az6007_usb_driver); - if (result) { - err("usb_register failed. (%d)", result); - return result; - } +static int az6007_suspend(struct usb_interface *intf, pm_message_t msg) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); - return 0; + az6007_ci_uninit(d); + return dvb_usbv2_suspend(intf, msg); } -static void __exit az6007_usb_module_exit(void) +static int az6007_resume(struct usb_interface *intf) { - /* deregister this driver from the USB subsystem */ - deb_info("az6007 usb module exit\n"); - usb_deregister(&az6007_usb_driver); + struct dvb_usb_device *d = usb_get_intfdata(intf); + struct dvb_usb_adapter *adap = &d->adapter[0]; + + az6007_ci_init(adap); + return dvb_usbv2_resume(intf); } -module_init(az6007_usb_module_init); -module_exit(az6007_usb_module_exit); +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver az6007_usb_driver = { + .name = KBUILD_MODNAME, + .id_table = az6007_usb_table, + .probe = dvb_usbv2_probe, + .disconnect = az6007_usb_disconnect, + .no_dynamic_id = 1, + .soft_unbind = 1, + /* + * FIXME: need to implement reset_resume, likely with + * dvb-usb-v2 core support + */ + .suspend = az6007_suspend, + .resume = az6007_resume, +}; + +module_usb_driver(az6007_usb_driver); MODULE_AUTHOR("Henry Wang "); MODULE_AUTHOR("Mauro Carvalho Chehab "); MODULE_DESCRIPTION("Driver for AzureWave 6007 DVB-C/T USB2.0 and clones"); -MODULE_VERSION("1.1"); +MODULE_VERSION("2.0"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(AZ6007_FIRMWARE); diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/usb/dvb-usb-v2/ce6230.c similarity index 58% rename from drivers/media/dvb/dvb-usb/ce6230.c rename to drivers/media/usb/dvb-usb-v2/ce6230.c index fa637255729c50a7026565d0bdc5eba2cc3ba903..f67b14bc32e3e653174dbae9e6d64567c657b389 100644 --- a/drivers/media/dvb/dvb-usb/ce6230.c +++ b/drivers/media/usb/dvb-usb-v2/ce6230.c @@ -1,5 +1,5 @@ /* - * DVB USB Linux driver for Intel CE6230 DVB-T USB2.0 receiver + * Intel CE6230 DVB USB driver * * Copyright (C) 2009 Antti Palosaari * @@ -20,18 +20,10 @@ */ #include "ce6230.h" -#include "zl10353.h" -#include "mxl5005s.h" -/* debug */ -static int dvb_usb_ce6230_debug; -module_param_named(debug, dvb_usb_ce6230_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static struct zl10353_config ce6230_zl10353_config; - -static int ce6230_rw_udev(struct usb_device *udev, struct req_t *req) +static int ce6230_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req) { int ret; unsigned int pipe; @@ -57,8 +49,9 @@ static int ce6230_rw_udev(struct usb_device *udev, struct req_t *req) requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); break; default: - err("unknown command:%02x", req->cmd); - ret = -EPERM; + dev_err(&d->udev->dev, "%s: unknown command=%02x\n", + KBUILD_MODNAME, req->cmd); + ret = -EINVAL; goto error; } @@ -71,22 +64,23 @@ static int ce6230_rw_udev(struct usb_device *udev, struct req_t *req) if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) { /* write */ memcpy(buf, req->data, req->data_len); - pipe = usb_sndctrlpipe(udev, 0); + pipe = usb_sndctrlpipe(d->udev, 0); } else { /* read */ - pipe = usb_rcvctrlpipe(udev, 0); + pipe = usb_rcvctrlpipe(d->udev, 0); } msleep(1); /* avoid I2C errors */ - ret = usb_control_msg(udev, pipe, request, requesttype, value, index, - buf, req->data_len, CE6230_USB_TIMEOUT); + ret = usb_control_msg(d->udev, pipe, request, requesttype, value, index, + buf, req->data_len, CE6230_USB_TIMEOUT); - ce6230_debug_dump(request, requesttype, value, index, buf, - req->data_len, deb_xfer); + dvb_usb_dbg_usb_control_msg(d->udev, request, requesttype, value, index, + buf, req->data_len); if (ret < 0) - deb_info("%s: usb_control_msg failed:%d\n", __func__, ret); + dev_err(&d->udev->dev, "%s: usb_control_msg() failed=%d\n", + KBUILD_MODNAME, ret); else ret = 0; @@ -99,23 +93,20 @@ static int ce6230_rw_udev(struct usb_device *udev, struct req_t *req) return ret; } -static int ce6230_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) -{ - return ce6230_rw_udev(d->udev, req); -} - /* I2C */ -static int ce6230_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) +static struct zl10353_config ce6230_zl10353_config; + +static int ce6230_i2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg msg[], int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i = 0; - struct req_t req; - int ret = 0; - memset(&req, 0, sizeof(req)); + int ret = 0, i = 0; + struct usb_req req; if (num > 2) - return -EINVAL; + return -EOPNOTSUPP; + + memset(&req, 0, sizeof(req)); if (mutex_lock_interruptible(&d->i2c_mutex) < 0) return -EAGAIN; @@ -131,8 +122,10 @@ static int ce6230_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], req.data = &msg[i+1].buf[0]; ret = ce6230_ctrl_msg(d, &req); } else { - err("i2c read not implemented"); - ret = -EPERM; + dev_err(&d->udev->dev, "%s: I2C read not " \ + "implemented\n", + KBUILD_MODNAME); + ret = -EOPNOTSUPP; } i += 2; } else { @@ -162,14 +155,14 @@ static int ce6230_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], return ret ? ret : i; } -static u32 ce6230_i2c_func(struct i2c_adapter *adapter) +static u32 ce6230_i2c_functionality(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; } -static struct i2c_algorithm ce6230_i2c_algo = { - .master_xfer = ce6230_i2c_xfer, - .functionality = ce6230_i2c_func, +static struct i2c_algorithm ce6230_i2c_algorithm = { + .master_xfer = ce6230_i2c_master_xfer, + .functionality = ce6230_i2c_functionality, }; /* Callbacks for DVB USB */ @@ -185,11 +178,15 @@ static struct zl10353_config ce6230_zl10353_config = { static int ce6230_zl10353_frontend_attach(struct dvb_usb_adapter *adap) { - deb_info("%s:\n", __func__); - adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &ce6230_zl10353_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe == NULL) + struct dvb_usb_device *d = adap_to_d(adap); + + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + adap->fe[0] = dvb_attach(zl10353_attach, &ce6230_zl10353_config, + &d->i2c_adap); + if (adap->fe[0] == NULL) return -ENODEV; + return 0; } @@ -212,9 +209,12 @@ static struct mxl5005s_config ce6230_mxl5003s_config = { static int ce6230_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) { + struct dvb_usb_device *d = adap_to_d(adap); int ret; - deb_info("%s:\n", __func__); - ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, + + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + ret = dvb_attach(mxl5005s_attach, adap->fe[0], &d->i2c_adap, &ce6230_mxl5003s_config) == NULL ? -ENODEV : 0; return ret; } @@ -222,103 +222,71 @@ static int ce6230_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) static int ce6230_power_ctrl(struct dvb_usb_device *d, int onoff) { int ret; - deb_info("%s: onoff:%d\n", __func__, onoff); + + dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); /* InterfaceNumber 1 / AlternateSetting 0 idle InterfaceNumber 1 / AlternateSetting 1 streaming */ ret = usb_set_interface(d->udev, 1, onoff); if (ret) - err("usb_set_interface failed with error:%d", ret); + dev_err(&d->udev->dev, "%s: usb_set_interface() failed=%d\n", + KBUILD_MODNAME, ret); return ret; } /* DVB USB Driver stuff */ -static struct dvb_usb_device_properties ce6230_properties; - -static int ce6230_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int ret = 0; - struct dvb_usb_device *d = NULL; - - deb_info("%s: interface:%d\n", __func__, - intf->cur_altsetting->desc.bInterfaceNumber); +static struct dvb_usb_device_properties ce6230_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .bInterfaceNumber = 1, - if (intf->cur_altsetting->desc.bInterfaceNumber == 1) { - ret = dvb_usb_device_init(intf, &ce6230_properties, THIS_MODULE, - &d, adapter_nr); - if (ret) - err("init failed with error:%d\n", ret); - } - - return ret; -} - -static struct usb_device_id ce6230_table[] = { - { USB_DEVICE(USB_VID_INTEL, USB_PID_INTEL_CE9500) }, - { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A310) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, ce6230_table); - -static struct dvb_usb_device_properties ce6230_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .no_reconnect = 1, - - .size_of_priv = 0, + .i2c_algo = &ce6230_i2c_algorithm, + .power_ctrl = ce6230_power_ctrl, + .frontend_attach = ce6230_zl10353_frontend_attach, + .tuner_attach = ce6230_mxl5003s_tuner_attach, .num_adapters = 1, .adapter = { { - .num_frontends = 1, - .fe = {{ - .frontend_attach = ce6230_zl10353_frontend_attach, - .tuner_attach = ce6230_mxl5003s_tuner_attach, .stream = { .type = USB_BULK, .count = 6, .endpoint = 0x82, .u = { .bulk = { - .buffersize = (16*512), + .buffersize = (16 * 512), } } }, - }}, } }, - - .power_ctrl = ce6230_power_ctrl, - - .i2c_algo = &ce6230_i2c_algo, - - .num_device_descs = 2, - .devices = { - { - .name = "Intel CE9500 reference design", - .cold_ids = {NULL}, - .warm_ids = {&ce6230_table[0], NULL}, - }, - { - .name = "AVerMedia A310 USB 2.0 DVB-T tuner", - .cold_ids = {NULL}, - .warm_ids = {&ce6230_table[1], NULL}, - }, - } }; -static struct usb_driver ce6230_driver = { - .name = "dvb_usb_ce6230", - .probe = ce6230_probe, - .disconnect = dvb_usb_device_exit, - .id_table = ce6230_table, +static const struct usb_device_id ce6230_id_table[] = { + { DVB_USB_DEVICE(USB_VID_INTEL, USB_PID_INTEL_CE9500, + &ce6230_props, "Intel CE9500 reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A310, + &ce6230_props, "AVerMedia A310 USB 2.0 DVB-T tuner", NULL) }, + { } +}; +MODULE_DEVICE_TABLE(usb, ce6230_id_table); + +static struct usb_driver ce6230_usb_driver = { + .name = KBUILD_MODNAME, + .id_table = ce6230_id_table, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .reset_resume = dvb_usbv2_reset_resume, + .no_dynamic_id = 1, + .soft_unbind = 1, }; -module_usb_driver(ce6230_driver); +module_usb_driver(ce6230_usb_driver); MODULE_AUTHOR("Antti Palosaari "); -MODULE_DESCRIPTION("Driver for Intel CE6230 DVB-T USB2.0"); +MODULE_DESCRIPTION("Intel CE6230 driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/ce6230.h b/drivers/media/usb/dvb-usb-v2/ce6230.h similarity index 58% rename from drivers/media/dvb/dvb-usb/ce6230.h rename to drivers/media/usb/dvb-usb-v2/ce6230.h index 97c42482ccb3de40e9f11e19289111227e501581..299e57e3390b8714549b867bf67df3adc02f6b24 100644 --- a/drivers/media/dvb/dvb-usb/ce6230.h +++ b/drivers/media/usb/dvb-usb-v2/ce6230.h @@ -1,5 +1,5 @@ /* - * DVB USB Linux driver for Intel CE6230 DVB-T USB2.0 receiver + * Intel CE6230 DVB USB driver * * Copyright (C) 2009 Antti Palosaari * @@ -19,35 +19,16 @@ * */ -#ifndef _DVB_USB_CE6230_H_ -#define _DVB_USB_CE6230_H_ +#ifndef CE6230_H +#define CE6230_H -#define DVB_USB_LOG_PREFIX "ce6230" -#include "dvb-usb.h" - -#define deb_info(args...) dprintk(dvb_usb_ce6230_debug, 0x01, args) -#define deb_rc(args...) dprintk(dvb_usb_ce6230_debug, 0x02, args) -#define deb_xfer(args...) dprintk(dvb_usb_ce6230_debug, 0x04, args) -#define deb_reg(args...) dprintk(dvb_usb_ce6230_debug, 0x08, args) -#define deb_i2c(args...) dprintk(dvb_usb_ce6230_debug, 0x10, args) -#define deb_fw(args...) dprintk(dvb_usb_ce6230_debug, 0x20, args) - -#define ce6230_debug_dump(r, t, v, i, b, l, func) { \ - int loop_; \ - func("%02x %02x %02x %02x %02x %02x %02x %02x", \ - t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \ - if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ - func(" >>> "); \ - else \ - func(" <<< "); \ - for (loop_ = 0; loop_ < l; loop_++) \ - func("%02x ", b[loop_]); \ - func("\n");\ -} +#include "dvb_usb.h" +#include "zl10353.h" +#include "mxl5005s.h" #define CE6230_USB_TIMEOUT 1000 -struct req_t { +struct usb_req { u8 cmd; /* [1] */ u16 value; /* [2|3] */ u16 index; /* [4|5] */ diff --git a/drivers/media/usb/dvb-usb-v2/cypress_firmware.c b/drivers/media/usb/dvb-usb-v2/cypress_firmware.c new file mode 100644 index 0000000000000000000000000000000000000000..211df549f26a9381f58084833fda668c0b4be48b --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/cypress_firmware.c @@ -0,0 +1,134 @@ +/* cypress_firmware.c is part of the DVB USB library. + * + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for downloading the firmware to Cypress FX 1 + * and 2 based devices. + * + */ + +#include "dvb_usb.h" +#include "cypress_firmware.h" + +struct usb_cypress_controller { + u8 id; + const char *name; /* name of the usb controller */ + u16 cs_reg; /* needs to be restarted, + * when the firmware has been downloaded */ +}; + +static const struct usb_cypress_controller cypress[] = { + { .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cs_reg = 0x7f92 }, + { .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cs_reg = 0x7f92 }, + { .id = CYPRESS_FX2, .name = "Cypress FX2", .cs_reg = 0xe600 }, +}; + +/* + * load a firmware packet to the device + */ +static int usb_cypress_writemem(struct usb_device *udev, u16 addr, u8 *data, + u8 len) +{ + dvb_usb_dbg_usb_control_msg(udev, + 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len); + + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000); +} + +int usbv2_cypress_load_firmware(struct usb_device *udev, + const struct firmware *fw, int type) +{ + struct hexline *hx; + int ret, pos = 0; + + hx = kmalloc(sizeof(struct hexline), GFP_KERNEL); + if (!hx) { + dev_err(&udev->dev, "%s: kmalloc() failed\n", KBUILD_MODNAME); + return -ENOMEM; + } + + /* stop the CPU */ + hx->data[0] = 1; + ret = usb_cypress_writemem(udev, cypress[type].cs_reg, hx->data, 1); + if (ret != 1) { + dev_err(&udev->dev, "%s: CPU stop failed=%d\n", + KBUILD_MODNAME, ret); + ret = -EIO; + goto err_kfree; + } + + /* write firmware to memory */ + for (;;) { + ret = dvb_usbv2_get_hexline(fw, hx, &pos); + if (ret < 0) + goto err_kfree; + else if (ret == 0) + break; + + ret = usb_cypress_writemem(udev, hx->addr, hx->data, hx->len); + if (ret < 0) { + goto err_kfree; + } else if (ret != hx->len) { + dev_err(&udev->dev, "%s: error while transferring " \ + "firmware (transferred size=%d, " \ + "block size=%d)\n", + KBUILD_MODNAME, ret, hx->len); + ret = -EIO; + goto err_kfree; + } + } + + /* start the CPU */ + hx->data[0] = 0; + ret = usb_cypress_writemem(udev, cypress[type].cs_reg, hx->data, 1); + if (ret != 1) { + dev_err(&udev->dev, "%s: CPU start failed=%d\n", + KBUILD_MODNAME, ret); + ret = -EIO; + goto err_kfree; + } + + ret = 0; +err_kfree: + kfree(hx); + return ret; +} +EXPORT_SYMBOL(usbv2_cypress_load_firmware); + +int dvb_usbv2_get_hexline(const struct firmware *fw, struct hexline *hx, + int *pos) +{ + u8 *b = (u8 *) &fw->data[*pos]; + int data_offs = 4; + + if (*pos >= fw->size) + return 0; + + memset(hx, 0, sizeof(struct hexline)); + hx->len = b[0]; + + if ((*pos + hx->len + 4) >= fw->size) + return -EINVAL; + + hx->addr = b[1] | (b[2] << 8); + hx->type = b[3]; + + if (hx->type == 0x04) { + /* b[4] and b[5] are the Extended linear address record data + * field */ + hx->addr |= (b[4] << 24) | (b[5] << 16); + } + + memcpy(hx->data, &b[data_offs], hx->len); + hx->chk = b[hx->len + data_offs]; + *pos += hx->len + 5; + + return *pos; +} +EXPORT_SYMBOL(dvb_usbv2_get_hexline); + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Cypress firmware download"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb-v2/cypress_firmware.h b/drivers/media/usb/dvb-usb-v2/cypress_firmware.h new file mode 100644 index 0000000000000000000000000000000000000000..80085fd4132cfb72954ad031f5db8adbd028db1f --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/cypress_firmware.h @@ -0,0 +1,31 @@ +/* cypress_firmware.h is part of the DVB USB library. + * + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for downloading the firmware to Cypress FX 1 + * and 2 based devices. + * + */ + +#ifndef CYPRESS_FIRMWARE_H +#define CYPRESS_FIRMWARE_H + +#define CYPRESS_AN2135 0 +#define CYPRESS_AN2235 1 +#define CYPRESS_FX2 2 + +/* commonly used firmware download types and function */ +struct hexline { + u8 len; + u32 addr; + u8 type; + u8 data[255]; + u8 chk; +}; +extern int usbv2_cypress_load_firmware(struct usb_device *, + const struct firmware *, int); +extern int dvb_usbv2_get_hexline(const struct firmware *, + struct hexline *, int *); + +#endif diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/drivers/media/usb/dvb-usb-v2/dvb_usb.h new file mode 100644 index 0000000000000000000000000000000000000000..bae16a1189d66deed84242f0c7fd26be398f77b7 --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb.h @@ -0,0 +1,403 @@ +/* + * DVB USB framework + * + * Copyright (C) 2004-6 Patrick Boettcher + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef DVB_USB_H +#define DVB_USB_H + +#include +#include +#include + +#include "dvb_frontend.h" +#include "dvb_demux.h" +#include "dvb_net.h" +#include "dmxdev.h" +#include "dvb-usb-ids.h" + +/* + * device file: /dev/dvb/adapter[0-1]/frontend[0-2] + * + * |-- device + * | |-- adapter0 + * | | |-- frontend0 + * | | |-- frontend1 + * | | `-- frontend2 + * | `-- adapter1 + * | |-- frontend0 + * | |-- frontend1 + * | `-- frontend2 + * + * + * Commonly used variable names: + * d = pointer to device (struct dvb_usb_device *) + * adap = pointer to adapter (struct dvb_usb_adapter *) + * fe = pointer to frontend (struct dvb_frontend *) + * + * Use macros defined in that file to resolve needed pointers. + */ + +/* helper macros for every DVB USB driver use */ +#define adap_to_d(adap) (container_of(adap, struct dvb_usb_device, \ + adapter[adap->id])) +#define adap_to_priv(adap) (adap_to_d(adap)->priv) +#define fe_to_adap(fe) ((struct dvb_usb_adapter *) ((fe)->dvb->priv)) +#define fe_to_d(fe) (adap_to_d(fe_to_adap(fe))) +#define fe_to_priv(fe) (fe_to_d(fe)->priv) +#define d_to_priv(d) (d->priv) + +#define dvb_usb_dbg_usb_control_msg(udev, r, t, v, i, b, l) { \ + char *direction; \ + if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ + direction = ">>>"; \ + else \ + direction = "<<<"; \ + dev_dbg(&udev->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x " \ + "%s %*ph\n", __func__, t, r, v & 0xff, v >> 8, \ + i & 0xff, i >> 8, l & 0xff, l >> 8, direction, l, b); \ +} + +#define DVB_USB_STREAM_BULK(endpoint_, count_, size_) { \ + .type = USB_BULK, \ + .count = count_, \ + .endpoint = endpoint_, \ + .u = { \ + .bulk = { \ + .buffersize = size_, \ + } \ + } \ +} + +#define DVB_USB_STREAM_ISOC(endpoint_, count_, frames_, size_, interval_) { \ + .type = USB_ISOC, \ + .count = count_, \ + .endpoint = endpoint_, \ + .u = { \ + .isoc = { \ + .framesperurb = frames_, \ + .framesize = size_,\ + .interval = interval_, \ + } \ + } \ +} + +#define DVB_USB_DEVICE(vend, prod, props_, name_, rc) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .driver_info = (kernel_ulong_t) &((const struct dvb_usb_driver_info) { \ + .props = (props_), \ + .name = (name_), \ + .rc_map = (rc), \ + }) + +struct dvb_usb_device; +struct dvb_usb_adapter; + +/** + * structure for carrying all needed data from the device driver to the general + * dvb usb routines + * @name: device name + * @rc_map: name of rc codes table + * @props: structure containing all device properties + */ +struct dvb_usb_driver_info { + const char *name; + const char *rc_map; + const struct dvb_usb_device_properties *props; +}; + +/** + * structure for remote controller configuration + * @map_name: name of rc codes table + * @allowed_protos: protocol(s) supported by the driver + * @change_protocol: callback to change protocol + * @query: called to query an event from the device + * @interval: time in ms between two queries + * @driver_type: used to point if a device supports raw mode + * @bulk_mode: device supports bulk mode for rc (disable polling mode) + */ +struct dvb_usb_rc { + const char *map_name; + u64 allowed_protos; + int (*change_protocol)(struct rc_dev *dev, u64 rc_type); + int (*query) (struct dvb_usb_device *d); + unsigned int interval; + const enum rc_driver_type driver_type; + bool bulk_mode; +}; + +/** + * usb streaming configration for adapter + * @type: urb type + * @count: count of used urbs + * @endpoint: stream usb endpoint number + */ +struct usb_data_stream_properties { +#define USB_BULK 1 +#define USB_ISOC 2 + u8 type; + u8 count; + u8 endpoint; + + union { + struct { + unsigned int buffersize; /* per URB */ + } bulk; + struct { + int framesperurb; + int framesize; + int interval; + } isoc; + } u; +}; + +/** + * properties of dvb usb device adapter + * @caps: adapter capabilities + * @pid_filter_count: pid count of adapter pid-filter + * @pid_filter_ctrl: called to enable/disable pid-filter + * @pid_filter: called to set/unset pid for filtering + * @stream: adapter usb stream configuration + */ +#define MAX_NO_OF_FE_PER_ADAP 3 +struct dvb_usb_adapter_properties { +#define DVB_USB_ADAP_HAS_PID_FILTER 0x01 +#define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02 +#define DVB_USB_ADAP_NEED_PID_FILTERING 0x04 + u8 caps; + + u8 pid_filter_count; + int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int); + int (*pid_filter) (struct dvb_usb_adapter *, int, u16, int); + + struct usb_data_stream_properties stream; +}; + +/** + * struct dvb_usb_device_properties - properties of a dvb-usb-device + * @driver_name: name of the owning driver module + * @owner: owner of the dvb_adapter + * @adapter_nr: values from the DVB_DEFINE_MOD_OPT_ADAPTER_NR() macro + * @bInterfaceNumber: usb interface number driver binds + * @size_of_priv: bytes allocated for the driver private data + * @generic_bulk_ctrl_endpoint: bulk control endpoint number for sent + * @generic_bulk_ctrl_endpoint_response: bulk control endpoint number for + * receive + * @generic_bulk_ctrl_delay: delay between bulk control sent and receive message + * @identify_state: called to determine the firmware state (cold or warm) and + * return possible firmware file name to be loaded + * @firmware: name of the firmware file to be loaded + * @download_firmware: called to download the firmware + * @i2c_algo: i2c_algorithm if the device has i2c-adapter + * @num_adapters: dvb usb device adapter count + * @get_adapter_count: called to resolve adapter count + * @adapter: array of all adapter properties of device + * @power_ctrl: called to enable/disable power of the device + * @read_config: called to resolve device configuration + * @read_mac_address: called to resolve adapter mac-address + * @frontend_attach: called to attach the possible frontends + * @tuner_attach: called to attach the possible tuners + * @frontend_ctrl: called to power on/off active frontend + * @streaming_ctrl: called to start/stop the usb streaming of adapter + * @init: called after adapters are created in order to finalize device + * configuration + * @exit: called when driver is unloaded + * @get_rc_config: called to resolve used remote controller configuration + * @get_stream_config: called to resolve input and output stream configuration + * of the adapter just before streaming is started. input stream is transport + * stream from the demodulator and output stream is usb stream to host. + */ +#define MAX_NO_OF_ADAPTER_PER_DEVICE 2 +struct dvb_usb_device_properties { + const char *driver_name; + struct module *owner; + short *adapter_nr; + + u8 bInterfaceNumber; + unsigned int size_of_priv; + u8 generic_bulk_ctrl_endpoint; + u8 generic_bulk_ctrl_endpoint_response; + unsigned int generic_bulk_ctrl_delay; + +#define WARM 0 +#define COLD 1 + int (*identify_state) (struct dvb_usb_device *, const char **); + const char *firmware; +#define RECONNECTS_USB 1 + int (*download_firmware) (struct dvb_usb_device *, + const struct firmware *); + + struct i2c_algorithm *i2c_algo; + + unsigned int num_adapters; + int (*get_adapter_count) (struct dvb_usb_device *); + struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; + int (*power_ctrl) (struct dvb_usb_device *, int); + int (*read_config) (struct dvb_usb_device *d); + int (*read_mac_address) (struct dvb_usb_adapter *, u8 []); + int (*frontend_attach) (struct dvb_usb_adapter *); + int (*tuner_attach) (struct dvb_usb_adapter *); + int (*frontend_ctrl) (struct dvb_frontend *, int); + int (*streaming_ctrl) (struct dvb_frontend *, int); + int (*init) (struct dvb_usb_device *); + void (*exit) (struct dvb_usb_device *); + int (*get_rc_config) (struct dvb_usb_device *, struct dvb_usb_rc *); +#define DVB_USB_FE_TS_TYPE_188 0 +#define DVB_USB_FE_TS_TYPE_204 1 +#define DVB_USB_FE_TS_TYPE_RAW 2 + int (*get_stream_config) (struct dvb_frontend *, u8 *, + struct usb_data_stream_properties *); +}; + +/** + * generic object of an usb stream + * @buf_num: number of buffer allocated + * @buf_size: size of each buffer in buf_list + * @buf_list: array containing all allocate buffers for streaming + * @dma_addr: list of dma_addr_t for each buffer in buf_list + * + * @urbs_initialized: number of URBs initialized + * @urbs_submitted: number of URBs submitted + */ +#define MAX_NO_URBS_FOR_DATA_STREAM 10 +struct usb_data_stream { + struct usb_device *udev; + struct usb_data_stream_properties props; + +#define USB_STATE_INIT 0x00 +#define USB_STATE_URB_BUF 0x01 + u8 state; + + void (*complete) (struct usb_data_stream *, u8 *, size_t); + + struct urb *urb_list[MAX_NO_URBS_FOR_DATA_STREAM]; + int buf_num; + unsigned long buf_size; + u8 *buf_list[MAX_NO_URBS_FOR_DATA_STREAM]; + dma_addr_t dma_addr[MAX_NO_URBS_FOR_DATA_STREAM]; + + int urbs_initialized; + int urbs_submitted; + + void *user_priv; +}; + +/** + * dvb adapter object on dvb usb device + * @props: pointer to adapter properties + * @stream: adapter the usb data stream + * @id: index of this adapter (starting with 0) + * @ts_type: transport stream, input stream, type + * @suspend_resume_active: set when there is ongoing suspend / resume + * @pid_filtering: is hardware pid_filtering used or not + * @feed_count: current feed count + * @max_feed_count: maimum feed count device can handle + * @dvb_adap: adapter dvb_adapter + * @dmxdev: adapter dmxdev + * @demux: adapter software demuxer + * @dvb_net: adapter dvb_net interfaces + * @sync_mutex: mutex used to sync control and streaming of the adapter + * @fe: adapter frontends + * @fe_init: rerouted frontend-init function + * @fe_sleep: rerouted frontend-sleep function + */ +struct dvb_usb_adapter { + const struct dvb_usb_adapter_properties *props; + struct usb_data_stream stream; + u8 id; + u8 ts_type; + bool suspend_resume_active; + bool pid_filtering; + u8 feed_count; + u8 max_feed_count; + s8 active_fe; + + /* dvb */ + struct dvb_adapter dvb_adap; + struct dmxdev dmxdev; + struct dvb_demux demux; + struct dvb_net dvb_net; + struct mutex sync_mutex; + + struct dvb_frontend *fe[MAX_NO_OF_FE_PER_ADAP]; + int (*fe_init[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *); + int (*fe_sleep[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *); +}; + +/** + * dvb usb device object + * @props: device properties + * @name: device name + * @rc_map: name of rc codes table + * @udev: pointer to the device's struct usb_device + * @intf: pointer to the device's usb interface + * @rc: remote controller configuration + * @probe_work: work to defer .probe() + * @powered: indicated whether the device is power or not + * @usb_mutex: mutex for usb control messages + * @i2c_mutex: mutex for i2c-transfers + * @i2c_adap: device's i2c-adapter + * @rc_dev: rc device for the remote control + * @rc_query_work: work for polling remote + * @priv: private data of the actual driver (allocate by dvb usb, size defined + * in size_of_priv of dvb_usb_properties). + */ +struct dvb_usb_device { + const struct dvb_usb_device_properties *props; + const char *name; + const char *rc_map; + + struct usb_device *udev; + struct usb_interface *intf; + struct dvb_usb_rc rc; + struct work_struct probe_work; + pid_t work_pid; + int powered; + + /* locking */ + struct mutex usb_mutex; + + /* i2c */ + struct mutex i2c_mutex; + struct i2c_adapter i2c_adap; + + struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; + + /* remote control */ + struct rc_dev *rc_dev; + char rc_phys[64]; + struct delayed_work rc_query_work; + + void *priv; +}; + +extern int dvb_usbv2_probe(struct usb_interface *, + const struct usb_device_id *); +extern void dvb_usbv2_disconnect(struct usb_interface *); +extern int dvb_usbv2_suspend(struct usb_interface *, pm_message_t); +extern int dvb_usbv2_resume(struct usb_interface *); +extern int dvb_usbv2_reset_resume(struct usb_interface *); + +/* the generic read/write method for device control */ +extern int dvb_usbv2_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16); +extern int dvb_usbv2_generic_write(struct dvb_usb_device *, u8 *, u16); + +#endif diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_common.h b/drivers/media/usb/dvb-usb-v2/dvb_usb_common.h new file mode 100644 index 0000000000000000000000000000000000000000..45f07090d431a25c3c2b2c645d90bf9c5b113c14 --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_common.h @@ -0,0 +1,35 @@ +/* + * DVB USB framework + * + * Copyright (C) 2004-6 Patrick Boettcher + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef DVB_USB_COMMON_H +#define DVB_USB_COMMON_H + +#include "dvb_usb.h" + +/* commonly used methods */ +extern int usb_urb_initv2(struct usb_data_stream *stream, + const struct usb_data_stream_properties *props); +extern int usb_urb_exitv2(struct usb_data_stream *stream); +extern int usb_urb_submitv2(struct usb_data_stream *stream, + struct usb_data_stream_properties *props); +extern int usb_urb_killv2(struct usb_data_stream *stream); + +#endif diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c new file mode 100644 index 0000000000000000000000000000000000000000..9859d2a2449b974bf162a32f78eeb8a543f9bf5f --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c @@ -0,0 +1,1049 @@ +/* + * DVB USB framework + * + * Copyright (C) 2004-6 Patrick Boettcher + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "dvb_usb_common.h" + +int dvb_usbv2_disable_rc_polling; +module_param_named(disable_rc_polling, dvb_usbv2_disable_rc_polling, int, 0644); +MODULE_PARM_DESC(disable_rc_polling, + "disable remote control polling (default: 0)"); +static int dvb_usb_force_pid_filter_usage; +module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, + int, 0444); +MODULE_PARM_DESC(force_pid_filter_usage, "force all DVB USB devices to use a " \ + "PID filter, if any (default: 0)"); + +static int dvb_usbv2_download_firmware(struct dvb_usb_device *d, const char *name) +{ + int ret; + const struct firmware *fw; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + if (!d->props->download_firmware) { + ret = -EINVAL; + goto err; + } + + ret = request_firmware(&fw, name, &d->udev->dev); + if (ret < 0) { + dev_err(&d->udev->dev, "%s: Did not find the firmware file "\ + "'%s'. Please see linux/Documentation/dvb/ " \ + "for more details on firmware-problems. " \ + "Status %d\n", KBUILD_MODNAME, name, ret); + goto err; + } + + dev_info(&d->udev->dev, "%s: downloading firmware from file '%s'\n", + KBUILD_MODNAME, name); + + ret = d->props->download_firmware(d, fw); + release_firmware(fw); + if (ret < 0) + goto err; + + return ret; +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int dvb_usbv2_i2c_init(struct dvb_usb_device *d) +{ + int ret; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + if (!d->props->i2c_algo) + return 0; + + strlcpy(d->i2c_adap.name, d->name, sizeof(d->i2c_adap.name)); + d->i2c_adap.algo = d->props->i2c_algo; + d->i2c_adap.dev.parent = &d->udev->dev; + i2c_set_adapdata(&d->i2c_adap, d); + + ret = i2c_add_adapter(&d->i2c_adap); + if (ret < 0) { + d->i2c_adap.algo = NULL; + dev_err(&d->udev->dev, "%s: i2c_add_adapter() failed=%d\n", + KBUILD_MODNAME, ret); + goto err; + } + + return 0; +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int dvb_usbv2_i2c_exit(struct dvb_usb_device *d) +{ + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + if (d->i2c_adap.algo) + i2c_del_adapter(&d->i2c_adap); + + return 0; +} + +static void dvb_usb_read_remote_control(struct work_struct *work) +{ + struct dvb_usb_device *d = container_of(work, + struct dvb_usb_device, rc_query_work.work); + int ret; + + /* + * When the parameter has been set to 1 via sysfs while the + * driver was running, or when bulk mode is enabled after IR init. + */ + if (dvb_usbv2_disable_rc_polling || d->rc.bulk_mode) + return; + + ret = d->rc.query(d); + if (ret < 0) { + dev_err(&d->udev->dev, "%s: rc.query() failed=%d\n", + KBUILD_MODNAME, ret); + return; /* stop polling */ + } + + schedule_delayed_work(&d->rc_query_work, + msecs_to_jiffies(d->rc.interval)); +} + +static int dvb_usbv2_remote_init(struct dvb_usb_device *d) +{ + int ret; + struct rc_dev *dev; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + if (dvb_usbv2_disable_rc_polling || !d->props->get_rc_config) + return 0; + + d->rc.map_name = d->rc_map; + ret = d->props->get_rc_config(d, &d->rc); + if (ret < 0) + goto err; + + /* disable rc when there is no keymap defined */ + if (!d->rc.map_name) + return 0; + + dev = rc_allocate_device(); + if (!dev) { + ret = -ENOMEM; + goto err; + } + + dev->dev.parent = &d->udev->dev; + dev->input_name = d->name; + usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys)); + strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys)); + dev->input_phys = d->rc_phys; + usb_to_input_id(d->udev, &dev->input_id); + /* TODO: likely RC-core should took const char * */ + dev->driver_name = (char *) d->props->driver_name; + dev->map_name = d->rc.map_name; + dev->driver_type = d->rc.driver_type; + dev->allowed_protos = d->rc.allowed_protos; + dev->change_protocol = d->rc.change_protocol; + dev->priv = d; + + ret = rc_register_device(dev); + if (ret < 0) { + rc_free_device(dev); + goto err; + } + + d->rc_dev = dev; + + /* start polling if needed */ + if (d->rc.query && !d->rc.bulk_mode) { + /* initialize a work queue for handling polling */ + INIT_DELAYED_WORK(&d->rc_query_work, + dvb_usb_read_remote_control); + dev_info(&d->udev->dev, "%s: schedule remote query interval " \ + "to %d msecs\n", KBUILD_MODNAME, + d->rc.interval); + schedule_delayed_work(&d->rc_query_work, + msecs_to_jiffies(d->rc.interval)); + } + + return 0; +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int dvb_usbv2_remote_exit(struct dvb_usb_device *d) +{ + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + if (d->rc_dev) { + cancel_delayed_work_sync(&d->rc_query_work); + rc_unregister_device(d->rc_dev); + d->rc_dev = NULL; + } + + return 0; +} + +static void dvb_usb_data_complete(struct usb_data_stream *stream, u8 *buf, + size_t len) +{ + struct dvb_usb_adapter *adap = stream->user_priv; + dvb_dmx_swfilter(&adap->demux, buf, len); +} + +static void dvb_usb_data_complete_204(struct usb_data_stream *stream, u8 *buf, + size_t len) +{ + struct dvb_usb_adapter *adap = stream->user_priv; + dvb_dmx_swfilter_204(&adap->demux, buf, len); +} + +static void dvb_usb_data_complete_raw(struct usb_data_stream *stream, u8 *buf, + size_t len) +{ + struct dvb_usb_adapter *adap = stream->user_priv; + dvb_dmx_swfilter_raw(&adap->demux, buf, len); +} + +int dvb_usbv2_adapter_stream_init(struct dvb_usb_adapter *adap) +{ + dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__, + adap->id); + + adap->stream.udev = adap_to_d(adap)->udev; + adap->stream.user_priv = adap; + adap->stream.complete = dvb_usb_data_complete; + + return usb_urb_initv2(&adap->stream, &adap->props->stream); +} + +int dvb_usbv2_adapter_stream_exit(struct dvb_usb_adapter *adap) +{ + dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__, + adap->id); + + return usb_urb_exitv2(&adap->stream); +} + +static inline int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, + int count) +{ + struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv; + struct dvb_usb_device *d = adap_to_d(adap); + int ret; + dev_dbg(&d->udev->dev, "%s: adap=%d active_fe=%d feed_type=%d " \ + "setting pid [%s]: %04x (%04d) at index %d '%s'\n", + __func__, adap->id, adap->active_fe, dvbdmxfeed->type, + adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid, + dvbdmxfeed->pid, dvbdmxfeed->index, + (count == 1) ? "on" : "off"); + + if (adap->active_fe == -1) + return -EINVAL; + + adap->feed_count += count; + + /* stop feeding if it is last pid */ + if (adap->feed_count == 0) { + dev_dbg(&d->udev->dev, "%s: stop feeding\n", __func__); + + if (d->props->streaming_ctrl) { + ret = d->props->streaming_ctrl( + adap->fe[adap->active_fe], 0); + if (ret < 0) { + dev_err(&d->udev->dev, "%s: streaming_ctrl() " \ + "failed=%d\n", KBUILD_MODNAME, + ret); + usb_urb_killv2(&adap->stream); + goto err_mutex_unlock; + } + } + usb_urb_killv2(&adap->stream); + mutex_unlock(&adap->sync_mutex); + } + + /* activate the pid on the device pid filter */ + if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER && + adap->pid_filtering && + adap->props->pid_filter) + ret = adap->props->pid_filter(adap, dvbdmxfeed->index, + dvbdmxfeed->pid, (count == 1) ? 1 : 0); + if (ret < 0) + dev_err(&d->udev->dev, "%s: pid_filter() " \ + "failed=%d\n", KBUILD_MODNAME, + ret); + + /* start feeding if it is first pid */ + if (adap->feed_count == 1 && count == 1) { + struct usb_data_stream_properties stream_props; + mutex_lock(&adap->sync_mutex); + dev_dbg(&d->udev->dev, "%s: start feeding\n", __func__); + + /* resolve input and output streaming paramters */ + if (d->props->get_stream_config) { + memcpy(&stream_props, &adap->props->stream, + sizeof(struct usb_data_stream_properties)); + ret = d->props->get_stream_config( + adap->fe[adap->active_fe], + &adap->ts_type, &stream_props); + if (ret < 0) + goto err_mutex_unlock; + } else { + stream_props = adap->props->stream; + } + + switch (adap->ts_type) { + case DVB_USB_FE_TS_TYPE_204: + adap->stream.complete = dvb_usb_data_complete_204; + break; + case DVB_USB_FE_TS_TYPE_RAW: + adap->stream.complete = dvb_usb_data_complete_raw; + break; + case DVB_USB_FE_TS_TYPE_188: + default: + adap->stream.complete = dvb_usb_data_complete; + break; + } + + usb_urb_submitv2(&adap->stream, &stream_props); + + if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER && + adap->props->caps & + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF && + adap->props->pid_filter_ctrl) { + ret = adap->props->pid_filter_ctrl(adap, + adap->pid_filtering); + if (ret < 0) { + dev_err(&d->udev->dev, "%s: " \ + "pid_filter_ctrl() failed=%d\n", + KBUILD_MODNAME, ret); + goto err_mutex_unlock; + } + } + + if (d->props->streaming_ctrl) { + ret = d->props->streaming_ctrl( + adap->fe[adap->active_fe], 1); + if (ret < 0) { + dev_err(&d->udev->dev, "%s: streaming_ctrl() " \ + "failed=%d\n", KBUILD_MODNAME, + ret); + goto err_mutex_unlock; + } + } + } + + return 0; +err_mutex_unlock: + mutex_unlock(&adap->sync_mutex); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + return dvb_usb_ctrl_feed(dvbdmxfeed, 1); +} + +static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + return dvb_usb_ctrl_feed(dvbdmxfeed, -1); +} + +int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap) +{ + int ret; + struct dvb_usb_device *d = adap_to_d(adap); + dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, adap->id); + + ret = dvb_register_adapter(&adap->dvb_adap, d->name, d->props->owner, + &d->udev->dev, d->props->adapter_nr); + if (ret < 0) { + dev_dbg(&d->udev->dev, "%s: dvb_register_adapter() failed=%d\n", + __func__, ret); + goto err_dvb_register_adapter; + } + + adap->dvb_adap.priv = adap; + + if (d->props->read_mac_address) { + ret = d->props->read_mac_address(adap, + adap->dvb_adap.proposed_mac); + if (ret < 0) + goto err_dvb_dmx_init; + + dev_info(&d->udev->dev, "%s: MAC address: %pM\n", + KBUILD_MODNAME, adap->dvb_adap.proposed_mac); + } + + adap->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; + adap->demux.priv = adap; + adap->demux.filternum = 0; + adap->demux.filternum = adap->max_feed_count; + adap->demux.feednum = adap->demux.filternum; + adap->demux.start_feed = dvb_usb_start_feed; + adap->demux.stop_feed = dvb_usb_stop_feed; + adap->demux.write_to_decoder = NULL; + ret = dvb_dmx_init(&adap->demux); + if (ret < 0) { + dev_err(&d->udev->dev, "%s: dvb_dmx_init() failed=%d\n", + KBUILD_MODNAME, ret); + goto err_dvb_dmx_init; + } + + adap->dmxdev.filternum = adap->demux.filternum; + adap->dmxdev.demux = &adap->demux.dmx; + adap->dmxdev.capabilities = 0; + ret = dvb_dmxdev_init(&adap->dmxdev, &adap->dvb_adap); + if (ret < 0) { + dev_err(&d->udev->dev, "%s: dvb_dmxdev_init() failed=%d\n", + KBUILD_MODNAME, ret); + goto err_dvb_dmxdev_init; + } + + ret = dvb_net_init(&adap->dvb_adap, &adap->dvb_net, &adap->demux.dmx); + if (ret < 0) { + dev_err(&d->udev->dev, "%s: dvb_net_init() failed=%d\n", + KBUILD_MODNAME, ret); + goto err_dvb_net_init; + } + + mutex_init(&adap->sync_mutex); + + return 0; +err_dvb_net_init: + dvb_dmxdev_release(&adap->dmxdev); +err_dvb_dmxdev_init: + dvb_dmx_release(&adap->demux); +err_dvb_dmx_init: + dvb_unregister_adapter(&adap->dvb_adap); +err_dvb_register_adapter: + adap->dvb_adap.priv = NULL; + return ret; +} + +int dvb_usbv2_adapter_dvb_exit(struct dvb_usb_adapter *adap) +{ + dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__, + adap->id); + + if (adap->dvb_adap.priv) { + dvb_net_release(&adap->dvb_net); + adap->demux.dmx.close(&adap->demux.dmx); + dvb_dmxdev_release(&adap->dmxdev); + dvb_dmx_release(&adap->demux); + dvb_unregister_adapter(&adap->dvb_adap); + } + + return 0; +} + +int dvb_usbv2_device_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + int ret; + + if (onoff) + d->powered++; + else + d->powered--; + + if (d->powered == 0 || (onoff && d->powered == 1)) { + /* when switching from 1 to 0 or from 0 to 1 */ + dev_dbg(&d->udev->dev, "%s: power=%d\n", __func__, onoff); + if (d->props->power_ctrl) { + ret = d->props->power_ctrl(d, onoff); + if (ret < 0) + goto err; + } + } + + return 0; +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int dvb_usb_fe_init(struct dvb_frontend *fe) +{ + int ret; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dvb_usb_device *d = adap_to_d(adap); + dev_dbg(&d->udev->dev, "%s: adap=%d fe=%d\n", __func__, adap->id, + fe->id); + + if (!adap->suspend_resume_active) { + adap->active_fe = fe->id; + mutex_lock(&adap->sync_mutex); + } + + ret = dvb_usbv2_device_power_ctrl(d, 1); + if (ret < 0) + goto err; + + if (d->props->frontend_ctrl) { + ret = d->props->frontend_ctrl(fe, 1); + if (ret < 0) + goto err; + } + + if (adap->fe_init[fe->id]) { + ret = adap->fe_init[fe->id](fe); + if (ret < 0) + goto err; + } +err: + if (!adap->suspend_resume_active) + mutex_unlock(&adap->sync_mutex); + + dev_dbg(&d->udev->dev, "%s: ret=%d\n", __func__, ret); + return ret; +} + +static int dvb_usb_fe_sleep(struct dvb_frontend *fe) +{ + int ret; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dvb_usb_device *d = adap_to_d(adap); + dev_dbg(&d->udev->dev, "%s: adap=%d fe=%d\n", __func__, adap->id, + fe->id); + + if (!adap->suspend_resume_active) + mutex_lock(&adap->sync_mutex); + + if (adap->fe_sleep[fe->id]) { + ret = adap->fe_sleep[fe->id](fe); + if (ret < 0) + goto err; + } + + if (d->props->frontend_ctrl) { + ret = d->props->frontend_ctrl(fe, 0); + if (ret < 0) + goto err; + } + + ret = dvb_usbv2_device_power_ctrl(d, 0); + if (ret < 0) + goto err; +err: + if (!adap->suspend_resume_active) { + adap->active_fe = -1; + mutex_unlock(&adap->sync_mutex); + } + + dev_dbg(&d->udev->dev, "%s: ret=%d\n", __func__, ret); + return ret; +} + +int dvb_usbv2_adapter_frontend_init(struct dvb_usb_adapter *adap) +{ + int ret, i, count_registered = 0; + struct dvb_usb_device *d = adap_to_d(adap); + dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, adap->id); + + memset(adap->fe, 0, sizeof(adap->fe)); + adap->active_fe = -1; + + if (d->props->frontend_attach) { + ret = d->props->frontend_attach(adap); + if (ret < 0) { + dev_dbg(&d->udev->dev, "%s: frontend_attach() " \ + "failed=%d\n", __func__, ret); + goto err_dvb_frontend_detach; + } + } else { + dev_dbg(&d->udev->dev, "%s: frontend_attach() do not exists\n", + __func__); + ret = 0; + goto err; + } + + for (i = 0; i < MAX_NO_OF_FE_PER_ADAP && adap->fe[i]; i++) { + adap->fe[i]->id = i; + /* re-assign sleep and wakeup functions */ + adap->fe_init[i] = adap->fe[i]->ops.init; + adap->fe[i]->ops.init = dvb_usb_fe_init; + adap->fe_sleep[i] = adap->fe[i]->ops.sleep; + adap->fe[i]->ops.sleep = dvb_usb_fe_sleep; + + ret = dvb_register_frontend(&adap->dvb_adap, adap->fe[i]); + if (ret < 0) { + dev_err(&d->udev->dev, "%s: frontend%d registration " \ + "failed\n", KBUILD_MODNAME, i); + goto err_dvb_unregister_frontend; + } + + count_registered++; + } + + if (d->props->tuner_attach) { + ret = d->props->tuner_attach(adap); + if (ret < 0) { + dev_dbg(&d->udev->dev, "%s: tuner_attach() failed=%d\n", + __func__, ret); + goto err_dvb_unregister_frontend; + } + } + + return 0; + +err_dvb_unregister_frontend: + for (i = count_registered - 1; i >= 0; i--) + dvb_unregister_frontend(adap->fe[i]); + +err_dvb_frontend_detach: + for (i = MAX_NO_OF_FE_PER_ADAP - 1; i >= 0; i--) { + if (adap->fe[i]) { + dvb_frontend_detach(adap->fe[i]); + adap->fe[i] = NULL; + } + } + +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +int dvb_usbv2_adapter_frontend_exit(struct dvb_usb_adapter *adap) +{ + int i; + dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__, + adap->id); + + for (i = MAX_NO_OF_FE_PER_ADAP - 1; i >= 0; i--) { + if (adap->fe[i]) { + dvb_unregister_frontend(adap->fe[i]); + dvb_frontend_detach(adap->fe[i]); + } + } + + return 0; +} + +static int dvb_usbv2_adapter_init(struct dvb_usb_device *d) +{ + struct dvb_usb_adapter *adap; + int ret, i, adapter_count; + + /* resolve adapter count */ + adapter_count = d->props->num_adapters; + if (d->props->get_adapter_count) { + ret = d->props->get_adapter_count(d); + if (ret < 0) + goto err; + + adapter_count = ret; + } + + for (i = 0; i < adapter_count; i++) { + adap = &d->adapter[i]; + adap->id = i; + adap->props = &d->props->adapter[i]; + + /* speed - when running at FULL speed we need a HW PID filter */ + if (d->udev->speed == USB_SPEED_FULL && + !(adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER)) { + dev_err(&d->udev->dev, "%s: this USB2.0 device " \ + "cannot be run on a USB1.1 port (it " \ + "lacks a hardware PID filter)\n", + KBUILD_MODNAME); + ret = -ENODEV; + goto err; + } else if ((d->udev->speed == USB_SPEED_FULL && + adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER) || + (adap->props->caps & DVB_USB_ADAP_NEED_PID_FILTERING)) { + dev_info(&d->udev->dev, "%s: will use the device's " \ + "hardware PID filter " \ + "(table count: %d)\n", KBUILD_MODNAME, + adap->props->pid_filter_count); + adap->pid_filtering = 1; + adap->max_feed_count = adap->props->pid_filter_count; + } else { + dev_info(&d->udev->dev, "%s: will pass the complete " \ + "MPEG2 transport stream to the " \ + "software demuxer\n", KBUILD_MODNAME); + adap->pid_filtering = 0; + adap->max_feed_count = 255; + } + + if (!adap->pid_filtering && dvb_usb_force_pid_filter_usage && + adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER) { + dev_info(&d->udev->dev, "%s: PID filter enabled by " \ + "module option\n", KBUILD_MODNAME); + adap->pid_filtering = 1; + adap->max_feed_count = adap->props->pid_filter_count; + } + + ret = dvb_usbv2_adapter_stream_init(adap); + if (ret) + goto err; + + ret = dvb_usbv2_adapter_dvb_init(adap); + if (ret) + goto err; + + ret = dvb_usbv2_adapter_frontend_init(adap); + if (ret) + goto err; + + /* use exclusive FE lock if there is multiple shared FEs */ + if (adap->fe[1]) + adap->dvb_adap.mfe_shared = 1; + } + + return 0; +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int dvb_usbv2_adapter_exit(struct dvb_usb_device *d) +{ + int i; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + for (i = MAX_NO_OF_ADAPTER_PER_DEVICE - 1; i >= 0; i--) { + if (d->adapter[i].props) { + dvb_usbv2_adapter_frontend_exit(&d->adapter[i]); + dvb_usbv2_adapter_dvb_exit(&d->adapter[i]); + dvb_usbv2_adapter_stream_exit(&d->adapter[i]); + } + } + + return 0; +} + +/* general initialization functions */ +static int dvb_usbv2_exit(struct dvb_usb_device *d) +{ + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + dvb_usbv2_remote_exit(d); + dvb_usbv2_adapter_exit(d); + dvb_usbv2_i2c_exit(d); + kfree(d->priv); + kfree(d); + + return 0; +} + +static int dvb_usbv2_init(struct dvb_usb_device *d) +{ + int ret; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + dvb_usbv2_device_power_ctrl(d, 1); + + if (d->props->read_config) { + ret = d->props->read_config(d); + if (ret < 0) + goto err; + } + + ret = dvb_usbv2_i2c_init(d); + if (ret < 0) + goto err; + + ret = dvb_usbv2_adapter_init(d); + if (ret < 0) + goto err; + + if (d->props->init) { + ret = d->props->init(d); + if (ret < 0) + goto err; + } + + ret = dvb_usbv2_remote_init(d); + if (ret < 0) + goto err; + + dvb_usbv2_device_power_ctrl(d, 0); + + return 0; +err: + dvb_usbv2_device_power_ctrl(d, 0); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +/* + * udev, which is used for the firmware downloading, requires we cannot + * block during module_init(). module_init() calls USB probe() which + * is this routine. Due to that we delay actual operation using workqueue + * and return always success here. + */ +static void dvb_usbv2_init_work(struct work_struct *work) +{ + int ret; + struct dvb_usb_device *d = + container_of(work, struct dvb_usb_device, probe_work); + + d->work_pid = current->pid; + dev_dbg(&d->udev->dev, "%s: work_pid=%d\n", __func__, d->work_pid); + + if (d->props->size_of_priv) { + d->priv = kzalloc(d->props->size_of_priv, GFP_KERNEL); + if (!d->priv) { + dev_err(&d->udev->dev, "%s: kzalloc() failed\n", + KBUILD_MODNAME); + ret = -ENOMEM; + goto err_usb_driver_release_interface; + } + } + + if (d->props->identify_state) { + const char *name = NULL; + ret = d->props->identify_state(d, &name); + if (ret == 0) { + ; + } else if (ret == COLD) { + dev_info(&d->udev->dev, "%s: found a '%s' in cold " \ + "state\n", KBUILD_MODNAME, d->name); + + if (!name) + name = d->props->firmware; + + ret = dvb_usbv2_download_firmware(d, name); + if (ret == 0) { + /* device is warm, continue initialization */ + ; + } else if (ret == RECONNECTS_USB) { + /* + * USB core will call disconnect() and then + * probe() as device reconnects itself from the + * USB bus. disconnect() will release all driver + * resources and probe() is called for 'new' + * device. As 'new' device is warm we should + * never go here again. + */ + return; + } else { + /* + * Unexpected error. We must unregister driver + * manually from the device, because device is + * already register by returning from probe() + * with success. usb_driver_release_interface() + * finally calls disconnect() in order to free + * resources. + */ + goto err_usb_driver_release_interface; + } + } else { + goto err_usb_driver_release_interface; + } + } + + dev_info(&d->udev->dev, "%s: found a '%s' in warm state\n", + KBUILD_MODNAME, d->name); + + ret = dvb_usbv2_init(d); + if (ret < 0) + goto err_usb_driver_release_interface; + + dev_info(&d->udev->dev, "%s: '%s' successfully initialized and " \ + "connected\n", KBUILD_MODNAME, d->name); + + return; +err_usb_driver_release_interface: + dev_info(&d->udev->dev, "%s: '%s' error while loading driver (%d)\n", + KBUILD_MODNAME, d->name, ret); + usb_driver_release_interface(to_usb_driver(d->intf->dev.driver), + d->intf); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return; +} + +int dvb_usbv2_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int ret; + struct dvb_usb_device *d; + struct usb_device *udev = interface_to_usbdev(intf); + struct dvb_usb_driver_info *driver_info = + (struct dvb_usb_driver_info *) id->driver_info; + + dev_dbg(&udev->dev, "%s: bInterfaceNumber=%d\n", __func__, + intf->cur_altsetting->desc.bInterfaceNumber); + + if (!id->driver_info) { + dev_err(&udev->dev, "%s: driver_info failed\n", KBUILD_MODNAME); + ret = -ENODEV; + goto err; + } + + d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL); + if (!d) { + dev_err(&udev->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME); + ret = -ENOMEM; + goto err; + } + + d->name = driver_info->name; + d->rc_map = driver_info->rc_map; + d->udev = udev; + d->intf = intf; + d->props = driver_info->props; + + if (d->intf->cur_altsetting->desc.bInterfaceNumber != + d->props->bInterfaceNumber) { + ret = -ENODEV; + goto err_kfree; + } + + mutex_init(&d->usb_mutex); + mutex_init(&d->i2c_mutex); + INIT_WORK(&d->probe_work, dvb_usbv2_init_work); + usb_set_intfdata(intf, d); + ret = schedule_work(&d->probe_work); + if (ret < 0) { + dev_err(&d->udev->dev, "%s: schedule_work() failed\n", + KBUILD_MODNAME); + goto err_kfree; + } + + return 0; +err_kfree: + kfree(d); +err: + dev_dbg(&udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} +EXPORT_SYMBOL(dvb_usbv2_probe); + +void dvb_usbv2_disconnect(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + const char *name = d->name; + struct device dev = d->udev->dev; + dev_dbg(&d->udev->dev, "%s: pid=%d work_pid=%d\n", __func__, + current->pid, d->work_pid); + + /* ensure initialization work is finished until release resources */ + if (d->work_pid != current->pid) + cancel_work_sync(&d->probe_work); + + if (d->props->exit) + d->props->exit(d); + + dvb_usbv2_exit(d); + + dev_info(&dev, "%s: '%s' successfully deinitialized and disconnected\n", + KBUILD_MODNAME, name); +} +EXPORT_SYMBOL(dvb_usbv2_disconnect); + +int dvb_usbv2_suspend(struct usb_interface *intf, pm_message_t msg) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + int ret = 0, i, active_fe; + struct dvb_frontend *fe; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + /* stop remote controller poll */ + if (d->rc.query && !d->rc.bulk_mode) + cancel_delayed_work_sync(&d->rc_query_work); + + for (i = MAX_NO_OF_ADAPTER_PER_DEVICE - 1; i >= 0; i--) { + active_fe = d->adapter[i].active_fe; + if (d->adapter[i].dvb_adap.priv && active_fe != -1) { + fe = d->adapter[i].fe[active_fe]; + d->adapter[i].suspend_resume_active = true; + + if (d->props->streaming_ctrl) + d->props->streaming_ctrl(fe, 0); + + /* stop usb streaming */ + usb_urb_killv2(&d->adapter[i].stream); + + ret = dvb_frontend_suspend(fe); + } + } + + return ret; +} +EXPORT_SYMBOL(dvb_usbv2_suspend); + +static int dvb_usbv2_resume_common(struct dvb_usb_device *d) +{ + int ret = 0, i, active_fe; + struct dvb_frontend *fe; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + for (i = 0; i < MAX_NO_OF_ADAPTER_PER_DEVICE; i++) { + active_fe = d->adapter[i].active_fe; + if (d->adapter[i].dvb_adap.priv && active_fe != -1) { + fe = d->adapter[i].fe[active_fe]; + + ret = dvb_frontend_resume(fe); + + /* resume usb streaming */ + usb_urb_submitv2(&d->adapter[i].stream, NULL); + + if (d->props->streaming_ctrl) + d->props->streaming_ctrl(fe, 1); + + d->adapter[i].suspend_resume_active = false; + } + } + + /* start remote controller poll */ + if (d->rc.query && !d->rc.bulk_mode) + schedule_delayed_work(&d->rc_query_work, + msecs_to_jiffies(d->rc.interval)); + + return ret; +} + +int dvb_usbv2_resume(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + return dvb_usbv2_resume_common(d); +} +EXPORT_SYMBOL(dvb_usbv2_resume); + +int dvb_usbv2_reset_resume(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + int ret; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + dvb_usbv2_device_power_ctrl(d, 1); + + if (d->props->init) + d->props->init(d); + + ret = dvb_usbv2_resume_common(d); + + dvb_usbv2_device_power_ctrl(d, 0); + + return ret; +} +EXPORT_SYMBOL(dvb_usbv2_reset_resume); + +MODULE_VERSION("2.0"); +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("DVB USB common"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c new file mode 100644 index 0000000000000000000000000000000000000000..0431beed0ef44dcfcfc7043d85fe514f602f1d10 --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c @@ -0,0 +1,77 @@ +/* + * DVB USB framework + * + * Copyright (C) 2004-6 Patrick Boettcher + * Copyright (C) 2012 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "dvb_usb_common.h" + +int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, + u16 rlen) +{ + int ret, actual_length; + + if (!d || !wbuf || !wlen || !d->props->generic_bulk_ctrl_endpoint || + !d->props->generic_bulk_ctrl_endpoint_response) { + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, -EINVAL); + return -EINVAL; + } + + ret = mutex_lock_interruptible(&d->usb_mutex); + if (ret < 0) + return ret; + + dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, wlen, wbuf); + + ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev, + d->props->generic_bulk_ctrl_endpoint), wbuf, wlen, + &actual_length, 2000); + if (ret < 0) + dev_err(&d->udev->dev, "%s: usb_bulk_msg() failed=%d\n", + KBUILD_MODNAME, ret); + else + ret = actual_length != wlen ? -EIO : 0; + + /* an answer is expected, and no error before */ + if (!ret && rbuf && rlen) { + if (d->props->generic_bulk_ctrl_delay) + usleep_range(d->props->generic_bulk_ctrl_delay, + d->props->generic_bulk_ctrl_delay + + 20000); + + ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, + d->props->generic_bulk_ctrl_endpoint_response), + rbuf, rlen, &actual_length, 2000); + if (ret) + dev_err(&d->udev->dev, "%s: 2nd usb_bulk_msg() " \ + "failed=%d\n", KBUILD_MODNAME, ret); + + dev_dbg(&d->udev->dev, "%s: <<< %*ph\n", __func__, + actual_length, rbuf); + } + + mutex_unlock(&d->usb_mutex); + return ret; +} +EXPORT_SYMBOL(dvb_usbv2_generic_rw); + +int dvb_usbv2_generic_write(struct dvb_usb_device *d, u8 *buf, u16 len) +{ + return dvb_usbv2_generic_rw(d, buf, len, NULL, 0); +} +EXPORT_SYMBOL(dvb_usbv2_generic_write); diff --git a/drivers/media/dvb/dvb-usb/ec168.c b/drivers/media/usb/dvb-usb-v2/ec168.c similarity index 57% rename from drivers/media/dvb/dvb-usb/ec168.c rename to drivers/media/usb/dvb-usb-v2/ec168.c index b4989ba8897d5fd5dbea9e55c3786b4a07fd2446..5c68f3918bc81279717131e15a5084e25e10d1d8 100644 --- a/drivers/media/dvb/dvb-usb/ec168.c +++ b/drivers/media/usb/dvb-usb-v2/ec168.c @@ -23,23 +23,15 @@ #include "ec100.h" #include "mxl5005s.h" -/* debug */ -static int dvb_usb_ec168_debug; -module_param_named(debug, dvb_usb_ec168_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static struct ec100_config ec168_ec100_config; - -static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req) +static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req) { int ret; unsigned int pipe; u8 request, requesttype; u8 *buf; - - switch (req->cmd) { case DOWNLOAD_FIRMWARE: case GPIO: @@ -69,8 +61,9 @@ static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req) request = DEMOD_RW; break; default: - err("unknown command:%02x", req->cmd); - ret = -EPERM; + dev_err(&d->udev->dev, "%s: unknown command=%02x\n", + KBUILD_MODNAME, req->cmd); + ret = -EINVAL; goto error; } @@ -83,19 +76,19 @@ static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req) if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) { /* write */ memcpy(buf, req->data, req->size); - pipe = usb_sndctrlpipe(udev, 0); + pipe = usb_sndctrlpipe(d->udev, 0); } else { /* read */ - pipe = usb_rcvctrlpipe(udev, 0); + pipe = usb_rcvctrlpipe(d->udev, 0); } msleep(1); /* avoid I2C errors */ - ret = usb_control_msg(udev, pipe, request, requesttype, req->value, + ret = usb_control_msg(d->udev, pipe, request, requesttype, req->value, req->index, buf, req->size, EC168_USB_TIMEOUT); - ec168_debug_dump(request, requesttype, req->value, req->index, buf, - req->size, deb_xfer); + dvb_usb_dbg_usb_control_msg(d->udev, request, requesttype, req->value, + req->index, buf, req->size); if (ret < 0) goto err_dealloc; @@ -112,16 +105,13 @@ static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req) err_dealloc: kfree(buf); error: - deb_info("%s: failed:%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req) -{ - return ec168_rw_udev(d->udev, req); -} - /* I2C */ +static struct ec100_config ec168_ec100_config; + static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { @@ -147,8 +137,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], ret = ec168_ctrl_msg(d, &req); i += 2; } else { - err("I2C read not implemented"); - ret = -ENOSYS; + dev_err(&d->udev->dev, "%s: I2C read not " \ + "implemented\n", + KBUILD_MODNAME); + ret = -EOPNOTSUPP; i += 2; } } else { @@ -181,7 +173,6 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], return i; } - static u32 ec168_i2c_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; @@ -193,88 +184,63 @@ static struct i2c_algorithm ec168_i2c_algo = { }; /* Callbacks for DVB USB */ -static struct ec100_config ec168_ec100_config = { - .demod_address = 0xff, /* not real address, demod is integrated */ -}; - -static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap) +static int ec168_identify_state(struct dvb_usb_device *d, const char **name) { - deb_info("%s:\n", __func__); - adap->fe_adap[0].fe = dvb_attach(ec100_attach, &ec168_ec100_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe == NULL) - return -ENODEV; + int ret; + u8 reply; + struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply}; + dev_dbg(&d->udev->dev, "%s:\n", __func__); - return 0; -} + ret = ec168_ctrl_msg(d, &req); + if (ret) + goto error; -static struct mxl5005s_config ec168_mxl5003s_config = { - .i2c_address = 0xc6, - .if_freq = IF_FREQ_4570000HZ, - .xtal_freq = CRYSTAL_FREQ_16000000HZ, - .agc_mode = MXL_SINGLE_AGC, - .tracking_filter = MXL_TF_OFF, - .rssi_enable = MXL_RSSI_ENABLE, - .cap_select = MXL_CAP_SEL_ENABLE, - .div_out = MXL_DIV_OUT_4, - .clock_out = MXL_CLOCK_OUT_DISABLE, - .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, - .top = MXL5005S_TOP_25P2, - .mod_mode = MXL_DIGITAL_MODE, - .if_mode = MXL_ZERO_IF, - .AgcMasterByte = 0x00, -}; + dev_dbg(&d->udev->dev, "%s: reply=%02x\n", __func__, reply); -static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) -{ - deb_info("%s:\n", __func__); - return dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, - &ec168_mxl5003s_config) == NULL ? -ENODEV : 0; -} + if (reply == 0x01) + ret = WARM; + else + ret = COLD; -static int ec168_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL}; - deb_info("%s: onoff:%d\n", __func__, onoff); - if (onoff) - req.index = 0x0102; - return ec168_ctrl_msg(adap->dev, &req); + return ret; +error: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; } -static int ec168_download_firmware(struct usb_device *udev, - const struct firmware *fw) +static int ec168_download_firmware(struct dvb_usb_device *d, + const struct firmware *fw) { - int i, len, packets, remainder, ret; - u16 addr = 0x0000; /* firmware start address */ + int ret, len, remaining; struct ec168_req req = {DOWNLOAD_FIRMWARE, 0, 0, 0, NULL}; - deb_info("%s:\n", __func__); + dev_dbg(&d->udev->dev, "%s:\n", __func__); - #define FW_PACKET_MAX_DATA 2048 - packets = fw->size / FW_PACKET_MAX_DATA; - remainder = fw->size % FW_PACKET_MAX_DATA; - len = FW_PACKET_MAX_DATA; - for (i = 0; i <= packets; i++) { - if (i == packets) /* set size of the last packet */ - len = remainder; + #define LEN_MAX 2048 /* max packet size */ + for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) { + len = remaining; + if (len > LEN_MAX) + len = LEN_MAX; req.size = len; - req.data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA); - req.index = addr; - addr += FW_PACKET_MAX_DATA; + req.data = (u8 *) &fw->data[fw->size - remaining]; + req.index = fw->size - remaining; - ret = ec168_rw_udev(udev, &req); + ret = ec168_ctrl_msg(d, &req); if (ret) { - err("firmware download failed:%d packet:%d", ret, i); + dev_err(&d->udev->dev, + "%s: firmware download failed=%d\n", + KBUILD_MODNAME, ret); goto error; } } + req.size = 0; /* set "warm"? */ req.cmd = SET_CONFIG; req.value = 0; req.index = 0x0001; - ret = ec168_rw_udev(udev, &req); + ret = ec168_ctrl_msg(d, &req); if (ret) goto error; @@ -282,7 +248,7 @@ static int ec168_download_firmware(struct usb_device *udev, req.cmd = GPIO; req.value = 0; req.index = 0x0206; - ret = ec168_rw_udev(udev, &req); + ret = ec168_ctrl_msg(d, &req); if (ret) goto error; @@ -290,146 +256,130 @@ static int ec168_download_firmware(struct usb_device *udev, req.cmd = WRITE_I2C; req.value = 0; req.index = 0x00c6; - ret = ec168_rw_udev(udev, &req); + ret = ec168_ctrl_msg(d, &req); if (ret) goto error; return ret; error: - deb_info("%s: failed:%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -static int ec168_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, int *cold) -{ - int ret; - u8 reply; - struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply}; - deb_info("%s:\n", __func__); - - ret = ec168_rw_udev(udev, &req); - if (ret) - goto error; +static struct ec100_config ec168_ec100_config = { + .demod_address = 0xff, /* not real address, demod is integrated */ +}; - deb_info("%s: reply:%02x\n", __func__, reply); +static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap_to_d(adap); + dev_dbg(&d->udev->dev, "%s:\n", __func__); - if (reply == 0x01) - *cold = 0; - else - *cold = 1; + adap->fe[0] = dvb_attach(ec100_attach, &ec168_ec100_config, + &d->i2c_adap); + if (adap->fe[0] == NULL) + return -ENODEV; - return ret; -error: - deb_info("%s: failed:%d\n", __func__, ret); - return ret; + return 0; } -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties ec168_properties; +static struct mxl5005s_config ec168_mxl5003s_config = { + .i2c_address = 0xc6, + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_OFF, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; -static int ec168_probe(struct usb_interface *intf, - const struct usb_device_id *id) +static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) { - int ret; - deb_info("%s: interface:%d\n", __func__, - intf->cur_altsetting->desc.bInterfaceNumber); - - ret = dvb_usb_device_init(intf, &ec168_properties, THIS_MODULE, NULL, - adapter_nr); - if (ret) - goto error; + struct dvb_usb_device *d = adap_to_d(adap); + dev_dbg(&d->udev->dev, "%s:\n", __func__); - return ret; -error: - deb_info("%s: failed:%d\n", __func__, ret); - return ret; + return dvb_attach(mxl5005s_attach, adap->fe[0], &d->i2c_adap, + &ec168_mxl5003s_config) == NULL ? -ENODEV : 0; } -#define E3C_EC168_1689 0 -#define E3C_EC168_FFFA 1 -#define E3C_EC168_FFFB 2 -#define E3C_EC168_1001 3 -#define E3C_EC168_1002 4 - -static struct usb_device_id ec168_id[] = { - [E3C_EC168_1689] = - {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168)}, - [E3C_EC168_FFFA] = - {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2)}, - [E3C_EC168_FFFB] = - {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3)}, - [E3C_EC168_1001] = - {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4)}, - [E3C_EC168_1002] = - {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5)}, - {} /* terminating entry */ -}; +static int ec168_streaming_ctrl(struct dvb_frontend *fe, int onoff) +{ + struct dvb_usb_device *d = fe_to_d(fe); + struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL}; + dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); -MODULE_DEVICE_TABLE(usb, ec168_id); + if (onoff) + req.index = 0x0102; + return ec168_ctrl_msg(d, &req); +} -static struct dvb_usb_device_properties ec168_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, +/* DVB USB Driver stuff */ +/* bInterfaceNumber 0 is HID + * bInterfaceNumber 1 is DVB-T */ +static struct dvb_usb_device_properties ec168_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .bInterfaceNumber = 1, - .usb_ctrl = DEVICE_SPECIFIC, + .identify_state = ec168_identify_state, + .firmware = EC168_FIRMWARE, .download_firmware = ec168_download_firmware, - .firmware = "dvb-usb-ec168.fw", - .no_reconnect = 1, - .size_of_priv = 0, + .i2c_algo = &ec168_i2c_algo, + .frontend_attach = ec168_ec100_frontend_attach, + .tuner_attach = ec168_mxl5003s_tuner_attach, + .streaming_ctrl = ec168_streaming_ctrl, .num_adapters = 1, .adapter = { { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = ec168_streaming_ctrl, - .frontend_attach = ec168_ec100_frontend_attach, - .tuner_attach = ec168_mxl5003s_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = (32*512), - } - } - }, - }}, + .stream = DVB_USB_STREAM_BULK(0x82, 6, 32 * 512), } }, +}; - .identify_state = ec168_identify_state, - - .i2c_algo = &ec168_i2c_algo, +static const struct dvb_usb_driver_info ec168_driver_info = { + .name = "E3C EC168 reference design", + .props = &ec168_props, +}; - .num_device_descs = 1, - .devices = { - { - .name = "E3C EC168 DVB-T USB2.0 reference design", - .cold_ids = { - &ec168_id[E3C_EC168_1689], - &ec168_id[E3C_EC168_FFFA], - &ec168_id[E3C_EC168_FFFB], - &ec168_id[E3C_EC168_1001], - &ec168_id[E3C_EC168_1002], - NULL}, - .warm_ids = {NULL}, - }, - } +static const struct usb_device_id ec168_id[] = { + { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168), + .driver_info = (kernel_ulong_t) &ec168_driver_info }, + { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2), + .driver_info = (kernel_ulong_t) &ec168_driver_info }, + { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3), + .driver_info = (kernel_ulong_t) &ec168_driver_info }, + { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4), + .driver_info = (kernel_ulong_t) &ec168_driver_info }, + { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5), + .driver_info = (kernel_ulong_t) &ec168_driver_info }, + {} }; +MODULE_DEVICE_TABLE(usb, ec168_id); static struct usb_driver ec168_driver = { - .name = "dvb_usb_ec168", - .probe = ec168_probe, - .disconnect = dvb_usb_device_exit, - .id_table = ec168_id, + .name = KBUILD_MODNAME, + .id_table = ec168_id, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .no_dynamic_id = 1, + .soft_unbind = 1, }; module_usb_driver(ec168_driver); MODULE_AUTHOR("Antti Palosaari "); -MODULE_DESCRIPTION("E3C EC168 DVB-T USB2.0 driver"); +MODULE_DESCRIPTION("E3C EC168 driver"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(EC168_FIRMWARE); diff --git a/drivers/media/dvb/dvb-usb/ec168.h b/drivers/media/usb/dvb-usb-v2/ec168.h similarity index 62% rename from drivers/media/dvb/dvb-usb/ec168.h rename to drivers/media/usb/dvb-usb-v2/ec168.h index e7e0b831314eeec4c42334f074ce87311d846eab..615a6569421f55298a07b4770711f0ef9e895113 100644 --- a/drivers/media/dvb/dvb-usb/ec168.h +++ b/drivers/media/usb/dvb-usb-v2/ec168.h @@ -22,30 +22,10 @@ #ifndef EC168_H #define EC168_H -#define DVB_USB_LOG_PREFIX "ec168" -#include "dvb-usb.h" - -#define deb_info(args...) dprintk(dvb_usb_ec168_debug, 0x01, args) -#define deb_rc(args...) dprintk(dvb_usb_ec168_debug, 0x02, args) -#define deb_xfer(args...) dprintk(dvb_usb_ec168_debug, 0x04, args) -#define deb_reg(args...) dprintk(dvb_usb_ec168_debug, 0x08, args) -#define deb_i2c(args...) dprintk(dvb_usb_ec168_debug, 0x10, args) -#define deb_fw(args...) dprintk(dvb_usb_ec168_debug, 0x20, args) - -#define ec168_debug_dump(r, t, v, i, b, l, func) { \ - int loop_; \ - func("%02x %02x %02x %02x %02x %02x %02x %02x", \ - t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \ - if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ - func(" >>> "); \ - else \ - func(" <<< "); \ - for (loop_ = 0; loop_ < l; loop_++) \ - func("%02x ", b[loop_]); \ - func("\n");\ -} +#include "dvb_usb.h" #define EC168_USB_TIMEOUT 1000 +#define EC168_FIRMWARE "dvb-usb-ec168.fw" struct ec168_req { u8 cmd; /* [1] */ diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/usb/dvb-usb-v2/gl861.c similarity index 54% rename from drivers/media/dvb/dvb-usb/gl861.c rename to drivers/media/usb/dvb-usb-v2/gl861.c index c1f5582e1cdfd3923d7fd816c22d0ce252d3c17e..b1b09c547861c26c3672a7290a45486ce52c9e30 100644 --- a/drivers/media/dvb/dvb-usb/gl861.c +++ b/drivers/media/usb/dvb-usb-v2/gl861.c @@ -11,11 +11,6 @@ #include "zl10353.h" #include "qt1010.h" -/* debug */ -static int dvb_usb_gl861_debug; -module_param_named(debug, dvb_usb_gl861_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." - DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, @@ -43,7 +38,8 @@ static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, value = value + wbuf[1]; break; default: - warn("wlen = %x, aborting.", wlen); + dev_err(&d->udev->dev, "%s: wlen=%d, aborting\n", + KBUILD_MODNAME, wlen); return -EINVAL; } @@ -103,9 +99,9 @@ static struct zl10353_config gl861_zl10353_config = { static int gl861_frontend_attach(struct dvb_usb_adapter *adap) { - adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &gl861_zl10353_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe == NULL) + adap->fe[0] = dvb_attach(zl10353_attach, &gl861_zl10353_config, + &adap_to_d(adap)->i2c_adap); + if (adap->fe[0] == NULL) return -EIO; return 0; @@ -118,98 +114,62 @@ static struct qt1010_config gl861_qt1010_config = { static int gl861_tuner_attach(struct dvb_usb_adapter *adap) { return dvb_attach(qt1010_attach, - adap->fe_adap[0].fe, &adap->dev->i2c_adap, + adap->fe[0], &adap_to_d(adap)->i2c_adap, &gl861_qt1010_config) == NULL ? -ENODEV : 0; } -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties gl861_properties; - -static int gl861_probe(struct usb_interface *intf, - const struct usb_device_id *id) +static int gl861_init(struct dvb_usb_device *d) { - struct dvb_usb_device *d; - struct usb_host_interface *alt; - int ret; - - if (intf->num_altsetting < 2) - return -ENODEV; - - ret = dvb_usb_device_init(intf, &gl861_properties, THIS_MODULE, &d, - adapter_nr); - if (ret == 0) { - alt = usb_altnum_to_altsetting(intf, 0); - - if (alt == NULL) { - deb_rc("not alt found!\n"); - return -ENODEV; - } - - ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, - alt->desc.bAlternateSetting); - } - - return ret; + /* + * There is 2 interfaces. Interface 0 is for TV and interface 1 is + * for HID remote controller. Interface 0 has 2 alternate settings. + * For some reason we need to set interface explicitly, defaulted + * as alternate setting 1? + */ + return usb_set_interface(d->udev, 0, 0); } -static struct usb_device_id gl861_table [] = { - { USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580_55801) }, - { USB_DEVICE(USB_VID_ALINK, USB_VID_ALINK_DTU) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, gl861_table); - -static struct dvb_usb_device_properties gl861_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = DEVICE_SPECIFIC, +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties gl861_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, - .size_of_priv = 0, + .i2c_algo = &gl861_i2c_algo, + .frontend_attach = gl861_frontend_attach, + .tuner_attach = gl861_tuner_attach, + .init = gl861_init, .num_adapters = 1, - .adapter = {{ - .num_frontends = 1, - .fe = {{ - - .frontend_attach = gl861_frontend_attach, - .tuner_attach = gl861_tuner_attach, - - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x81, - .u = { - .bulk = { - .buffersize = 512, - } - } - }, - }}, - } }, - .i2c_algo = &gl861_i2c_algo, - - .num_device_descs = 2, - .devices = { + .adapter = { { - .name = "MSI Mega Sky 55801 DVB-T USB2.0", - .cold_ids = { NULL }, - .warm_ids = { &gl861_table[0], NULL }, - }, - { - .name = "A-LINK DTU DVB-T USB2.0", - .cold_ids = { NULL }, - .warm_ids = { &gl861_table[1], NULL }, - }, + .stream = DVB_USB_STREAM_BULK(0x81, 7, 512), + } } }; -static struct usb_driver gl861_driver = { - .name = "dvb_usb_gl861", - .probe = gl861_probe, - .disconnect = dvb_usb_device_exit, - .id_table = gl861_table, +static const struct usb_device_id gl861_id_table[] = { + { DVB_USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580_55801, + &gl861_props, "MSI Mega Sky 55801 DVB-T USB2.0", NULL) }, + { DVB_USB_DEVICE(USB_VID_ALINK, USB_VID_ALINK_DTU, + &gl861_props, "A-LINK DTU DVB-T USB2.0", NULL) }, + { } +}; +MODULE_DEVICE_TABLE(usb, gl861_id_table); + +static struct usb_driver gl861_usb_driver = { + .name = KBUILD_MODNAME, + .id_table = gl861_id_table, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .reset_resume = dvb_usbv2_reset_resume, + .no_dynamic_id = 1, + .soft_unbind = 1, }; -module_usb_driver(gl861_driver); +module_usb_driver(gl861_usb_driver); MODULE_AUTHOR("Carl Lundqvist "); MODULE_DESCRIPTION("Driver MSI Mega Sky 580 DVB-T USB2.0 / GL861"); diff --git a/drivers/media/dvb/dvb-usb/gl861.h b/drivers/media/usb/dvb-usb-v2/gl861.h similarity index 59% rename from drivers/media/dvb/dvb-usb/gl861.h rename to drivers/media/usb/dvb-usb-v2/gl861.h index c54855e2c233f8ae007e30a31f2f57ecf5c6e32c..b0b80d87bb7e36f98a6e413d6f7c0e6cc63b77e0 100644 --- a/drivers/media/dvb/dvb-usb/gl861.h +++ b/drivers/media/usb/dvb-usb-v2/gl861.h @@ -1,10 +1,7 @@ #ifndef _DVB_USB_GL861_H_ #define _DVB_USB_GL861_H_ -#define DVB_USB_LOG_PREFIX "gl861" -#include "dvb-usb.h" - -#define deb_rc(args...) dprintk(dvb_usb_gl861_debug, 0x01, args) +#include "dvb_usb.h" #define GL861_WRITE 0x40 #define GL861_READ 0xc0 diff --git a/drivers/media/usb/dvb-usb-v2/it913x.c b/drivers/media/usb/dvb-usb-v2/it913x.c new file mode 100644 index 0000000000000000000000000000000000000000..695f9106bc54c1b8b55028d9b1d1c458386928f3 --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/it913x.c @@ -0,0 +1,799 @@ +/* + * DVB USB compliant linux driver for ITE IT9135 and IT9137 + * + * Copyright (C) 2011 Malcolm Priestley (tvboxspy@gmail.com) + * IT9135 (C) ITE Tech Inc. + * IT9137 (C) ITE Tech Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License Version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/dvb/it9137.txt for firmware information + * + */ +#define DVB_USB_LOG_PREFIX "it913x" + +#include +#include +#include + +#include "dvb_usb.h" +#include "it913x-fe.h" + +/* debug */ +static int dvb_usb_it913x_debug; +#define it_debug(var, level, args...) \ + do { if ((var & level)) pr_debug(DVB_USB_LOG_PREFIX": " args); \ +} while (0) +#define deb_info(level, args...) it_debug(dvb_usb_it913x_debug, level, args) +#define info(args...) pr_info(DVB_USB_LOG_PREFIX": " args) + +module_param_named(debug, dvb_usb_it913x_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); + +static int dvb_usb_it913x_firmware; +module_param_named(firmware, dvb_usb_it913x_firmware, int, 0644); +MODULE_PARM_DESC(firmware, "set firmware 0=auto"\ + "1=IT9137 2=IT9135 V1 3=IT9135 V2"); +#define FW_IT9137 "dvb-usb-it9137-01.fw" +#define FW_IT9135_V1 "dvb-usb-it9135-01.fw" +#define FW_IT9135_V2 "dvb-usb-it9135-02.fw" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct it913x_state { + struct ite_config it913x_config; + u8 pid_filter_onoff; + bool proprietary_ir; + int cmd_counter; +}; + +static u16 check_sum(u8 *p, u8 len) +{ + u16 sum = 0; + u8 i = 1; + while (i < len) + sum += (i++ & 1) ? (*p++) << 8 : *p++; + return ~sum; +} + +static int it913x_io(struct dvb_usb_device *d, u8 mode, u8 pro, + u8 cmd, u32 reg, u8 addr, u8 *data, u8 len) +{ + struct it913x_state *st = d->priv; + int ret = 0, i, buf_size = 1; + u8 *buff; + u8 rlen; + u16 chk_sum; + + buff = kzalloc(256, GFP_KERNEL); + if (!buff) { + info("USB Buffer Failed"); + return -ENOMEM; + } + + buff[buf_size++] = pro; + buff[buf_size++] = cmd; + buff[buf_size++] = st->cmd_counter; + + switch (mode) { + case READ_LONG: + case WRITE_LONG: + buff[buf_size++] = len; + buff[buf_size++] = 2; + buff[buf_size++] = (reg >> 24); + buff[buf_size++] = (reg >> 16) & 0xff; + buff[buf_size++] = (reg >> 8) & 0xff; + buff[buf_size++] = reg & 0xff; + break; + case READ_SHORT: + buff[buf_size++] = addr; + break; + case WRITE_SHORT: + buff[buf_size++] = len; + buff[buf_size++] = addr; + buff[buf_size++] = (reg >> 8) & 0xff; + buff[buf_size++] = reg & 0xff; + break; + case READ_DATA: + case WRITE_DATA: + break; + case WRITE_CMD: + mode = 7; + break; + default: + kfree(buff); + return -EINVAL; + } + + if (mode & 1) { + for (i = 0; i < len ; i++) + buff[buf_size++] = data[i]; + } + chk_sum = check_sum(&buff[1], buf_size); + + buff[buf_size++] = chk_sum >> 8; + buff[0] = buf_size; + buff[buf_size++] = (chk_sum & 0xff); + + ret = dvb_usbv2_generic_rw(d, buff, buf_size, buff, (mode & 1) ? + 5 : len + 5); + if (ret < 0) + goto error; + + rlen = (mode & 0x1) ? 0x1 : len; + + if (mode & 1) + ret = buff[2]; + else + memcpy(data, &buff[3], rlen); + + st->cmd_counter++; + +error: kfree(buff); + + return ret; +} + +static int it913x_wr_reg(struct dvb_usb_device *d, u8 pro, u32 reg , u8 data) +{ + int ret; + u8 b[1]; + b[0] = data; + ret = it913x_io(d, WRITE_LONG, pro, + CMD_DEMOD_WRITE, reg, 0, b, sizeof(b)); + + return ret; +} + +static int it913x_read_reg(struct dvb_usb_device *d, u32 reg) +{ + int ret; + u8 data[1]; + + ret = it913x_io(d, READ_LONG, DEV_0, + CMD_DEMOD_READ, reg, 0, &data[0], sizeof(data)); + + return (ret < 0) ? ret : data[0]; +} + +static int it913x_query(struct dvb_usb_device *d, u8 pro) +{ + struct it913x_state *st = d->priv; + int ret, i; + u8 data[4]; + u8 ver; + + for (i = 0; i < 5; i++) { + ret = it913x_io(d, READ_LONG, pro, CMD_DEMOD_READ, + 0x1222, 0, &data[0], 3); + ver = data[0]; + if (ver > 0 && ver < 3) + break; + msleep(100); + } + + if (ver < 1 || ver > 2) { + info("Failed to identify chip version applying 1"); + st->it913x_config.chip_ver = 0x1; + st->it913x_config.chip_type = 0x9135; + return 0; + } + + st->it913x_config.chip_ver = ver; + st->it913x_config.chip_type = (u16)(data[2] << 8) + data[1]; + + info("Chip Version=%02x Chip Type=%04x", st->it913x_config.chip_ver, + st->it913x_config.chip_type); + + ret = it913x_io(d, READ_SHORT, pro, + CMD_QUERYINFO, 0, 0x1, &data[0], 4); + + st->it913x_config.firmware = (data[0] << 24) | (data[1] << 16) | + (data[2] << 8) | data[3]; + + return ret; +} + +static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct it913x_state *st = adap_to_priv(adap); + int ret; + u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; + + mutex_lock(&d->i2c_mutex); + + deb_info(1, "PID_C (%02x)", onoff); + + ret = it913x_wr_reg(d, pro, PID_EN, st->pid_filter_onoff); + + mutex_unlock(&d->i2c_mutex); + return ret; +} + +static int it913x_pid_filter(struct dvb_usb_adapter *adap, + int index, u16 pid, int onoff) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct it913x_state *st = adap_to_priv(adap); + int ret; + u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; + + mutex_lock(&d->i2c_mutex); + + deb_info(1, "PID_F (%02x)", onoff); + + ret = it913x_wr_reg(d, pro, PID_LSB, (u8)(pid & 0xff)); + + ret |= it913x_wr_reg(d, pro, PID_MSB, (u8)(pid >> 8)); + + ret |= it913x_wr_reg(d, pro, PID_INX_EN, (u8)onoff); + + ret |= it913x_wr_reg(d, pro, PID_INX, (u8)(index & 0x1f)); + + if (d->udev->speed == USB_SPEED_HIGH && pid == 0x2000) { + ret |= it913x_wr_reg(d , pro, PID_EN, !onoff); + st->pid_filter_onoff = !onoff; + } else + st->pid_filter_onoff = + adap->pid_filtering; + + mutex_unlock(&d->i2c_mutex); + return 0; +} + + +static int it913x_return_status(struct dvb_usb_device *d) +{ + struct it913x_state *st = d->priv; + int ret = it913x_query(d, DEV_0); + if (st->it913x_config.firmware > 0) + info("Firmware Version %d", st->it913x_config.firmware); + + return ret; +} + +static int it913x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + static u8 data[256]; + int ret; + u32 reg; + u8 pro; + + mutex_lock(&d->i2c_mutex); + + deb_info(2, "num of messages %d address %02x", num, msg[0].addr); + + pro = (msg[0].addr & 0x2) ? DEV_0_DMOD : 0x0; + pro |= (msg[0].addr & 0x20) ? DEV_1 : DEV_0; + memcpy(data, msg[0].buf, msg[0].len); + reg = (data[0] << 24) + (data[1] << 16) + + (data[2] << 8) + data[3]; + if (num == 2) { + ret = it913x_io(d, READ_LONG, pro, + CMD_DEMOD_READ, reg, 0, data, msg[1].len); + memcpy(msg[1].buf, data, msg[1].len); + } else + ret = it913x_io(d, WRITE_LONG, pro, CMD_DEMOD_WRITE, + reg, 0, &data[4], msg[0].len - 4); + + mutex_unlock(&d->i2c_mutex); + + return ret; +} + +static u32 it913x_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm it913x_i2c_algo = { + .master_xfer = it913x_i2c_xfer, + .functionality = it913x_i2c_func, +}; + +/* Callbacks for DVB USB */ +#define IT913X_POLL 250 +static int it913x_rc_query(struct dvb_usb_device *d) +{ + u8 ibuf[4]; + int ret; + u32 key; + /* Avoid conflict with frontends*/ + mutex_lock(&d->i2c_mutex); + + ret = it913x_io(d, READ_LONG, PRO_LINK, CMD_IR_GET, + 0, 0, &ibuf[0], sizeof(ibuf)); + + if ((ibuf[2] + ibuf[3]) == 0xff) { + key = ibuf[2]; + key += ibuf[0] << 16; + key += ibuf[1] << 8; + deb_info(1, "NEC Extended Key =%08x", key); + if (d->rc_dev != NULL) + rc_keydown(d->rc_dev, key, 0); + } + + mutex_unlock(&d->i2c_mutex); + + return ret; +} + +/* Firmware sets raw */ +static const char fw_it9135_v1[] = FW_IT9135_V1; +static const char fw_it9135_v2[] = FW_IT9135_V2; +static const char fw_it9137[] = FW_IT9137; + +static void ite_get_firmware_name(struct dvb_usb_device *d, + const char **name) +{ + struct it913x_state *st = d->priv; + int sw; + /* auto switch */ + if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_KWORLD_2) + sw = IT9137_FW; + else if (st->it913x_config.chip_ver == 1) + sw = IT9135_V1_FW; + else + sw = IT9135_V2_FW; + + /* force switch */ + if (dvb_usb_it913x_firmware != IT9135_AUTO) + sw = dvb_usb_it913x_firmware; + + switch (sw) { + case IT9135_V1_FW: + st->it913x_config.firmware_ver = 1; + st->it913x_config.adc_x2 = 1; + st->it913x_config.read_slevel = false; + *name = fw_it9135_v1; + break; + case IT9135_V2_FW: + st->it913x_config.firmware_ver = 1; + st->it913x_config.adc_x2 = 1; + st->it913x_config.read_slevel = false; + *name = fw_it9135_v2; + switch (st->it913x_config.tuner_id_0) { + case IT9135_61: + case IT9135_62: + break; + default: + info("Unknown tuner ID applying default 0x60"); + case IT9135_60: + st->it913x_config.tuner_id_0 = IT9135_60; + } + break; + case IT9137_FW: + default: + st->it913x_config.firmware_ver = 0; + st->it913x_config.adc_x2 = 0; + st->it913x_config.read_slevel = true; + *name = fw_it9137; + } + + return; +} + +#define TS_MPEG_PKT_SIZE 188 +#define EP_LOW 21 +#define TS_BUFFER_SIZE_PID (EP_LOW*TS_MPEG_PKT_SIZE) +#define EP_HIGH 348 +#define TS_BUFFER_SIZE_MAX (EP_HIGH*TS_MPEG_PKT_SIZE) + +static int it913x_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, + struct usb_data_stream_properties *stream) +{ + struct dvb_usb_adapter *adap = fe_to_adap(fe); + if (adap->pid_filtering) + stream->u.bulk.buffersize = TS_BUFFER_SIZE_PID; + else + stream->u.bulk.buffersize = TS_BUFFER_SIZE_MAX; + + return 0; +} + +static int it913x_select_config(struct dvb_usb_device *d) +{ + struct it913x_state *st = d->priv; + int ret, reg; + + ret = it913x_return_status(d); + if (ret < 0) + return ret; + + if (st->it913x_config.chip_ver == 0x02 + && st->it913x_config.chip_type == 0x9135) + reg = it913x_read_reg(d, 0x461d); + else + reg = it913x_read_reg(d, 0x461b); + + if (reg < 0) + return reg; + + if (reg == 0) { + st->it913x_config.dual_mode = 0; + st->it913x_config.tuner_id_0 = IT9135_38; + st->proprietary_ir = true; + } else { + /* TS mode */ + reg = it913x_read_reg(d, 0x49c5); + if (reg < 0) + return reg; + st->it913x_config.dual_mode = reg; + + /* IR mode type */ + reg = it913x_read_reg(d, 0x49ac); + if (reg < 0) + return reg; + if (reg == 5) { + info("Remote propriety (raw) mode"); + st->proprietary_ir = true; + } else if (reg == 1) { + info("Remote HID mode NOT SUPPORTED"); + st->proprietary_ir = false; + } + + /* Tuner_id */ + reg = it913x_read_reg(d, 0x49d0); + if (reg < 0) + return reg; + st->it913x_config.tuner_id_0 = reg; + } + + info("Dual mode=%x Tuner Type=%x", st->it913x_config.dual_mode, + st->it913x_config.tuner_id_0); + + return ret; +} + +static int it913x_streaming_ctrl(struct dvb_frontend *fe, int onoff) +{ + struct dvb_usb_adapter *adap = fe_to_adap(fe); + struct dvb_usb_device *d = adap_to_d(adap); + struct it913x_state *st = fe_to_priv(fe); + int ret = 0; + u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; + + deb_info(1, "STM (%02x)", onoff); + + if (!onoff) { + mutex_lock(&d->i2c_mutex); + + ret = it913x_wr_reg(d, pro, PID_RST, 0x1); + + mutex_unlock(&d->i2c_mutex); + st->pid_filter_onoff = + adap->pid_filtering; + + } + + return ret; +} + +static int it913x_identify_state(struct dvb_usb_device *d, const char **name) +{ + struct it913x_state *st = d->priv; + int ret; + u8 reg; + + /* Read and select config */ + ret = it913x_select_config(d); + if (ret < 0) + return ret; + + ite_get_firmware_name(d, name); + + if (st->it913x_config.firmware > 0) + return WARM; + + if (st->it913x_config.dual_mode) { + st->it913x_config.tuner_id_1 = it913x_read_reg(d, 0x49e0); + ret = it913x_wr_reg(d, DEV_0, GPIOH1_EN, 0x1); + ret |= it913x_wr_reg(d, DEV_0, GPIOH1_ON, 0x1); + ret |= it913x_wr_reg(d, DEV_0, GPIOH1_O, 0x1); + msleep(50); + ret |= it913x_wr_reg(d, DEV_0, GPIOH1_O, 0x0); + msleep(50); + reg = it913x_read_reg(d, GPIOH1_O); + if (reg == 0) { + ret |= it913x_wr_reg(d, DEV_0, GPIOH1_O, 0x1); + ret |= it913x_return_status(d); + if (ret != 0) + ret = it913x_wr_reg(d, DEV_0, + GPIOH1_O, 0x0); + } + } + + reg = it913x_read_reg(d, IO_MUX_POWER_CLK); + + if (st->it913x_config.dual_mode) { + ret |= it913x_wr_reg(d, DEV_0, 0x4bfb, CHIP2_I2C_ADDR); + if (st->it913x_config.firmware_ver == 1) + ret |= it913x_wr_reg(d, DEV_0, 0xcfff, 0x1); + else + ret |= it913x_wr_reg(d, DEV_0, CLK_O_EN, 0x1); + } else { + ret |= it913x_wr_reg(d, DEV_0, 0x4bfb, 0x0); + if (st->it913x_config.firmware_ver == 1) + ret |= it913x_wr_reg(d, DEV_0, 0xcfff, 0x0); + else + ret |= it913x_wr_reg(d, DEV_0, CLK_O_EN, 0x0); + } + + ret |= it913x_wr_reg(d, DEV_0, I2C_CLK, I2C_CLK_100); + + return (ret < 0) ? ret : COLD; +} + +static int it913x_download_firmware(struct dvb_usb_device *d, + const struct firmware *fw) +{ + struct it913x_state *st = d->priv; + int ret = 0, i = 0, pos = 0; + u8 packet_size, min_pkt; + u8 *fw_data; + + ret = it913x_wr_reg(d, DEV_0, I2C_CLK, I2C_CLK_100); + + info("FRM Starting Firmware Download"); + + /* Multi firmware loader */ + /* This uses scatter write firmware headers */ + /* The firmware must start with 03 XX 00 */ + /* and be the extact firmware length */ + + if (st->it913x_config.chip_ver == 2) + min_pkt = 0x11; + else + min_pkt = 0x19; + + while (i <= fw->size) { + if (((fw->data[i] == 0x3) && (fw->data[i + 2] == 0x0)) + || (i == fw->size)) { + packet_size = i - pos; + if ((packet_size > min_pkt) || (i == fw->size)) { + fw_data = (u8 *)(fw->data + pos); + pos += packet_size; + if (packet_size > 0) { + ret = it913x_io(d, WRITE_DATA, + DEV_0, CMD_SCATTER_WRITE, 0, + 0, fw_data, packet_size); + if (ret < 0) + break; + } + udelay(1000); + } + } + i++; + } + + if (ret < 0) + info("FRM Firmware Download Failed (%d)" , ret); + else + info("FRM Firmware Download Completed - Resetting Device"); + + msleep(30); + + ret = it913x_io(d, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0); + if (ret < 0) + info("FRM Device not responding to reboot"); + + ret = it913x_return_status(d); + if (st->it913x_config.firmware == 0) { + info("FRM Failed to reboot device"); + return -ENODEV; + } + + msleep(30); + + ret = it913x_wr_reg(d, DEV_0, I2C_CLK, I2C_CLK_400); + + msleep(30); + + /* Tuner function */ + if (st->it913x_config.dual_mode) + ret |= it913x_wr_reg(d, DEV_0_DMOD , 0xec4c, 0xa0); + else + ret |= it913x_wr_reg(d, DEV_0_DMOD , 0xec4c, 0x68); + + if ((st->it913x_config.chip_ver == 1) && + (st->it913x_config.chip_type == 0x9135)) { + ret |= it913x_wr_reg(d, DEV_0, PADODPU, 0x0); + ret |= it913x_wr_reg(d, DEV_0, AGC_O_D, 0x0); + if (st->it913x_config.dual_mode) { + ret |= it913x_wr_reg(d, DEV_1, PADODPU, 0x0); + ret |= it913x_wr_reg(d, DEV_1, AGC_O_D, 0x0); + } + } + + return (ret < 0) ? -ENODEV : 0; +} + +static int it913x_name(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap_to_d(adap); + const char *desc = d->name; + char *fe_name[] = {"_1", "_2", "_3", "_4"}; + char *name = adap->fe[0]->ops.info.name; + + strlcpy(name, desc, 128); + strlcat(name, fe_name[adap->id], 128); + + return 0; +} + +static int it913x_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct it913x_state *st = d->priv; + int ret = 0; + u8 adap_addr = I2C_BASE_ADDR + (adap->id << 5); + u16 ep_size = adap->stream.buf_size / 4; + u8 pkt_size = 0x80; + + if (d->udev->speed != USB_SPEED_HIGH) + pkt_size = 0x10; + + st->it913x_config.adf = it913x_read_reg(d, IO_MUX_POWER_CLK); + + adap->fe[0] = dvb_attach(it913x_fe_attach, + &d->i2c_adap, adap_addr, &st->it913x_config); + + if (adap->id == 0 && adap->fe[0]) { + it913x_wr_reg(d, DEV_0_DMOD, MP2_SW_RST, 0x1); + it913x_wr_reg(d, DEV_0_DMOD, MP2IF2_SW_RST, 0x1); + it913x_wr_reg(d, DEV_0, EP0_TX_EN, 0x0f); + it913x_wr_reg(d, DEV_0, EP0_TX_NAK, 0x1b); + it913x_wr_reg(d, DEV_0, EP0_TX_EN, 0x2f); + it913x_wr_reg(d, DEV_0, EP4_TX_LEN_LSB, + ep_size & 0xff); + it913x_wr_reg(d, DEV_0, EP4_TX_LEN_MSB, ep_size >> 8); + ret = it913x_wr_reg(d, DEV_0, EP4_MAX_PKT, pkt_size); + } else if (adap->id == 1 && adap->fe[0]) { + it913x_wr_reg(d, DEV_0, EP0_TX_EN, 0x6f); + it913x_wr_reg(d, DEV_0, EP5_TX_LEN_LSB, + ep_size & 0xff); + it913x_wr_reg(d, DEV_0, EP5_TX_LEN_MSB, ep_size >> 8); + it913x_wr_reg(d, DEV_0, EP5_MAX_PKT, pkt_size); + it913x_wr_reg(d, DEV_0_DMOD, MP2IF2_EN, 0x1); + it913x_wr_reg(d, DEV_1_DMOD, MP2IF_SERIAL, 0x1); + it913x_wr_reg(d, DEV_1, TOP_HOSTB_SER_MODE, 0x1); + it913x_wr_reg(d, DEV_0_DMOD, TSIS_ENABLE, 0x1); + it913x_wr_reg(d, DEV_0_DMOD, MP2_SW_RST, 0x0); + it913x_wr_reg(d, DEV_0_DMOD, MP2IF2_SW_RST, 0x0); + it913x_wr_reg(d, DEV_0_DMOD, MP2IF2_HALF_PSB, 0x0); + it913x_wr_reg(d, DEV_0_DMOD, MP2IF_STOP_EN, 0x1); + it913x_wr_reg(d, DEV_1_DMOD, MPEG_FULL_SPEED, 0x0); + ret = it913x_wr_reg(d, DEV_1_DMOD, MP2IF_STOP_EN, 0x0); + } else + return -ENODEV; + + ret |= it913x_name(adap); + + return ret; +} + +/* DVB USB Driver */ +static int it913x_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) +{ + struct it913x_state *st = d->priv; + + if (st->proprietary_ir == false) { + rc->map_name = NULL; + return 0; + } + + rc->allowed_protos = RC_TYPE_NEC; + rc->query = it913x_rc_query; + rc->interval = 250; + + return 0; +} + +static int it913x_get_adapter_count(struct dvb_usb_device *d) +{ + struct it913x_state *st = d->priv; + if (st->it913x_config.dual_mode) + return 2; + return 1; +} + +static struct dvb_usb_device_properties it913x_properties = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .bInterfaceNumber = 0, + .generic_bulk_ctrl_endpoint = 0x02, + .generic_bulk_ctrl_endpoint_response = 0x81, + + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct it913x_state), + + .identify_state = it913x_identify_state, + .i2c_algo = &it913x_i2c_algo, + + .download_firmware = it913x_download_firmware, + + .frontend_attach = it913x_frontend_attach, + .get_rc_config = it913x_get_rc_config, + .get_stream_config = it913x_get_stream_config, + .get_adapter_count = it913x_get_adapter_count, + .streaming_ctrl = it913x_streaming_ctrl, + + + .adapter = { + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER| + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = it913x_pid_filter, + .pid_filter_ctrl = it913x_pid_filter_ctrl, + .stream = + DVB_USB_STREAM_BULK(0x84, 10, TS_BUFFER_SIZE_MAX), + }, + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER| + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = it913x_pid_filter, + .pid_filter_ctrl = it913x_pid_filter_ctrl, + .stream = + DVB_USB_STREAM_BULK(0x85, 10, TS_BUFFER_SIZE_MAX), + } + } +}; + +static const struct usb_device_id it913x_id_table[] = { + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09, + &it913x_properties, "Kworld UB499-2T T09(IT9137)", + RC_MAP_IT913X_V1) }, + { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135, + &it913x_properties, "ITE 9135 Generic", + RC_MAP_IT913X_V1) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22_IT9137, + &it913x_properties, "Sveon STV22 Dual DVB-T HDTV(IT9137)", + RC_MAP_IT913X_V1) }, + { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9005, + &it913x_properties, "ITE 9135(9005) Generic", + RC_MAP_IT913X_V2) }, + { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006, + &it913x_properties, "ITE 9135(9006) Generic", + RC_MAP_IT913X_V1) }, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, it913x_id_table); + +static struct usb_driver it913x_driver = { + .name = KBUILD_MODNAME, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .id_table = it913x_id_table, +}; + +module_usb_driver(it913x_driver); + +MODULE_AUTHOR("Malcolm Priestley "); +MODULE_DESCRIPTION("it913x USB 2 Driver"); +MODULE_VERSION("1.32"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FW_IT9135_V1); +MODULE_FIRMWARE(FW_IT9135_V2); +MODULE_FIRMWARE(FW_IT9137); + diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c similarity index 69% rename from drivers/media/dvb/dvb-usb/lmedm04.c rename to drivers/media/usb/dvb-usb-v2/lmedm04.c index 25d1031460f8071deaa2bd0e9a5e14879824fb37..c41d9d9ec7b54df963ede5ad9deb6d9534e50620 100644 --- a/drivers/media/dvb/dvb-usb/lmedm04.c +++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c @@ -19,6 +19,8 @@ * * MVB0194 (LME2510C+SHARP0194) * + * LME2510C + M88RS2000 + * * For firmware see Documentation/dvb/lmedm04.txt * * I2C addresses: @@ -62,13 +64,14 @@ * LME2510: SHARP:BS2F7HZ0194(MV0194) cannot cold reset and share system * with other tuners. After a cold reset streaming will not start. * + * M88RS2000 suffers from loss of lock. */ #define DVB_USB_LOG_PREFIX "LME2510(C)" #include #include #include -#include "dvb-usb.h" +#include "dvb_usb.h" #include "lmedm04.h" #include "tda826x.h" #include "tda10086.h" @@ -80,24 +83,28 @@ #include "m88rs2000.h" +#define LME2510_C_S7395 "dvb-usb-lme2510c-s7395.fw"; +#define LME2510_C_LG "dvb-usb-lme2510c-lg.fw"; +#define LME2510_C_S0194 "dvb-usb-lme2510c-s0194.fw"; +#define LME2510_C_RS2000 "dvb-usb-lme2510c-rs2000.fw"; +#define LME2510_LG "dvb-usb-lme2510-lg.fw"; +#define LME2510_S0194 "dvb-usb-lme2510-s0194.fw"; /* debug */ static int dvb_usb_lme2510_debug; -#define l_dprintk(var, level, args...) do { \ +#define lme_debug(var, level, args...) do { \ if ((var >= level)) \ - printk(KERN_DEBUG DVB_USB_LOG_PREFIX ": " args); \ + pr_debug(DVB_USB_LOG_PREFIX": " args); \ } while (0) - -#define deb_info(level, args...) l_dprintk(dvb_usb_lme2510_debug, level, args) +#define deb_info(level, args...) lme_debug(dvb_usb_lme2510_debug, level, args) #define debug_data_snipet(level, name, p) \ deb_info(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \ *p, *(p+1), *(p+2), *(p+3), *(p+4), \ *(p+5), *(p+6), *(p+7)); - +#define info(args...) pr_info(DVB_USB_LOG_PREFIX": "args) module_param_named(debug, dvb_usb_lme2510_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." - DVB_USB_DEBUG_STATUS); +MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); static int dvb_usb_lme2510_firmware; module_param_named(firmware, dvb_usb_lme2510_firmware, int, 0644); @@ -136,7 +143,8 @@ struct lme2510_state { void *buffer; struct urb *lme_urb; void *usb_buffer; - + int (*fe_set_voltage)(struct dvb_frontend *, fe_sec_voltage_t); + u8 dvb_usb_lme2510_firmware; }; static int lme2510_bulk_write(struct usb_device *dev, @@ -246,7 +254,7 @@ static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out) static void lme2510_int_response(struct urb *lme_urb) { struct dvb_usb_adapter *adap = lme_urb->context; - struct lme2510_state *st = adap->dev->priv; + struct lme2510_state *st = adap_to_priv(adap); static u8 *ibuf, *rbuf; int i = 0, offset; u32 key; @@ -283,8 +291,9 @@ static void lme2510_int_response(struct urb *lme_urb) ? (ibuf[3] ^ 0xff) << 8 : 0; key += (ibuf[2] ^ 0xff) << 16; deb_info(1, "INT Key =%08x", key); - if (adap->dev->rc_dev != NULL) - rc_keydown(adap->dev->rc_dev, key, 0); + if (adap_to_d(adap)->rc_dev != NULL) + rc_keydown(adap_to_d(adap)->rc_dev, + key, 0); } break; case 0xbb: @@ -313,12 +322,12 @@ static void lme2510_int_response(struct urb *lme_urb) } break; case TUNER_RS2000: - if (ibuf[2] > 0) + if (ibuf[1] == 0x3 && ibuf[6] == 0xff) st->signal_lock = 0xff; else - st->signal_lock = 0xf0; - st->signal_level = ibuf[4]; - st->signal_sn = ibuf[5]; + st->signal_lock = 0x00; + st->signal_level = ibuf[5]; + st->signal_sn = ibuf[4]; st->time_key = ibuf[7]; default: break; @@ -338,22 +347,23 @@ static void lme2510_int_response(struct urb *lme_urb) static int lme2510_int_read(struct dvb_usb_adapter *adap) { - struct lme2510_state *lme_int = adap->dev->priv; + struct dvb_usb_device *d = adap_to_d(adap); + struct lme2510_state *lme_int = adap_to_priv(adap); lme_int->lme_urb = usb_alloc_urb(0, GFP_ATOMIC); if (lme_int->lme_urb == NULL) return -ENOMEM; - lme_int->buffer = usb_alloc_coherent(adap->dev->udev, 128, GFP_ATOMIC, + lme_int->buffer = usb_alloc_coherent(d->udev, 128, GFP_ATOMIC, &lme_int->lme_urb->transfer_dma); if (lme_int->buffer == NULL) return -ENOMEM; usb_fill_int_urb(lme_int->lme_urb, - adap->dev->udev, - usb_rcvintpipe(adap->dev->udev, 0xa), + d->udev, + usb_rcvintpipe(d->udev, 0xa), lme_int->buffer, 128, lme2510_int_response, @@ -370,17 +380,18 @@ static int lme2510_int_read(struct dvb_usb_adapter *adap) static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) { - struct lme2510_state *st = adap->dev->priv; + struct dvb_usb_device *d = adap_to_d(adap); + struct lme2510_state *st = adap_to_priv(adap); static u8 clear_pid_reg[] = LME_ALL_PIDS; static u8 rbuf[1]; int ret = 0; deb_info(1, "PID Clearing Filter"); - mutex_lock(&adap->dev->i2c_mutex); + mutex_lock(&d->i2c_mutex); if (!onoff) { - ret |= lme2510_usb_talk(adap->dev, clear_pid_reg, + ret |= lme2510_usb_talk(d, clear_pid_reg, sizeof(clear_pid_reg), rbuf, sizeof(rbuf)); st->pid_off = true; } else @@ -388,7 +399,7 @@ static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) st->pid_size = 0; - mutex_unlock(&adap->dev->i2c_mutex); + mutex_unlock(&d->i2c_mutex); return 0; } @@ -396,15 +407,16 @@ static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) static int lme2510_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) { + struct dvb_usb_device *d = adap_to_d(adap); int ret = 0; deb_info(3, "%s PID=%04x Index=%04x onoff=%02x", __func__, pid, index, onoff); if (onoff) { - mutex_lock(&adap->dev->i2c_mutex); - ret |= lme2510_enable_pid(adap->dev, index, pid); - mutex_unlock(&adap->dev->i2c_mutex); + mutex_lock(&d->i2c_mutex); + ret |= lme2510_enable_pid(d, index, pid); + mutex_unlock(&d->i2c_mutex); } @@ -412,7 +424,7 @@ static int lme2510_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, } -static int lme2510_return_status(struct usb_device *dev) +static int lme2510_return_status(struct dvb_usb_device *d) { int ret = 0; u8 *data; @@ -421,7 +433,7 @@ static int lme2510_return_status(struct usb_device *dev) if (!data) return -ENOMEM; - ret |= usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + ret |= usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), 0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200); info("Firmware Status: %x (%x)", ret , data[2]); @@ -613,10 +625,6 @@ static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], if (gate == 0) gate = 5; - if (num > 2) - warn("more than 2 i2c messages" - "at a time is not handled yet. TODO."); - for (i = 0; i < num; i++) { read_o = 1 & (msg[i].flags & I2C_M_RD); read = i+1 < num && (msg[i+1].flags & I2C_M_RD); @@ -676,22 +684,11 @@ static struct i2c_algorithm lme2510_i2c_algo = { .functionality = lme2510_i2c_func, }; -/* Callbacks for DVB USB */ -static int lme2510_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) +static int lme2510_streaming_ctrl(struct dvb_frontend *fe, int onoff) { - if (pid_filter != 2) - props->adapter[0].fe[0].caps &= - ~DVB_USB_ADAP_NEED_PID_FILTERING; - *cold = 0; - return 0; -} - -static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - struct lme2510_state *st = adap->dev->priv; + struct dvb_usb_adapter *adap = fe_to_adap(fe); + struct dvb_usb_device *d = adap_to_d(adap); + struct lme2510_state *st = adap_to_priv(adap); static u8 clear_reg_3[] = LME_ALL_PIDS; static u8 rbuf[1]; int ret = 0, rlen = sizeof(rbuf); @@ -704,14 +701,14 @@ static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) else { deb_info(1, "STM Steam Off"); /* mutex is here only to avoid collision with I2C */ - mutex_lock(&adap->dev->i2c_mutex); + mutex_lock(&d->i2c_mutex); - ret = lme2510_usb_talk(adap->dev, clear_reg_3, + ret = lme2510_usb_talk(d, clear_reg_3, sizeof(clear_reg_3), rbuf, rlen); st->stream_on = 0; st->i2c_talk_onoff = 1; - mutex_unlock(&adap->dev->i2c_mutex); + mutex_unlock(&d->i2c_mutex); } return (ret < 0) ? -ENODEV : 0; @@ -725,7 +722,7 @@ static u8 check_sum(u8 *p, u8 len) return sum; } -static int lme2510_download_firmware(struct usb_device *dev, +static int lme2510_download_firmware(struct dvb_usb_device *d, const struct firmware *fw) { int ret = 0; @@ -737,9 +734,10 @@ static int lme2510_download_firmware(struct usb_device *dev, packet_size = 0x31; len_in = 1; - data = kzalloc(512, GFP_KERNEL); + data = kzalloc(128, GFP_KERNEL); if (!data) { - info("FRM Could not start Firmware Download (Buffer allocation failed)"); + info("FRM Could not start Firmware Download"\ + "(Buffer allocation failed)"); return -ENOMEM; } @@ -763,21 +761,15 @@ static int lme2510_download_firmware(struct usb_device *dev, data[wlen-1] = check_sum(fw_data, dlen+1); deb_info(1, "Data S=%02x:E=%02x CS= %02x", data[3], data[dlen+2], data[dlen+3]); - ret |= lme2510_bulk_write(dev, data, wlen, 1); - ret |= lme2510_bulk_read(dev, data, len_in , 1); + lme2510_usb_talk(d, data, wlen, data, len_in); ret |= (data[0] == 0x88) ? 0 : -1; } } - usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), - 0x06, 0x80, 0x0200, 0x00, data, 0x0109, 1000); - - data[0] = 0x8a; len_in = 1; msleep(2000); - ret |= lme2510_bulk_write(dev, data , len_in, 1); /*Resetting*/ - ret |= lme2510_bulk_read(dev, data, len_in, 1); + lme2510_usb_talk(d, data, len_in, data, len_in); msleep(400); if (ret < 0) @@ -786,44 +778,42 @@ static int lme2510_download_firmware(struct usb_device *dev, info("FRM Firmware Download Completed - Resetting Device"); kfree(data); - return (ret < 0) ? -ENODEV : 0; + return RECONNECTS_USB; } -static void lme_coldreset(struct usb_device *dev) +static void lme_coldreset(struct dvb_usb_device *d) { - int ret = 0, len_in; - u8 data[512] = {0}; - + u8 data[1] = {0}; data[0] = 0x0a; - len_in = 1; info("FRM Firmware Cold Reset"); - ret |= lme2510_bulk_write(dev, data , len_in, 1); /*Cold Resetting*/ - ret |= lme2510_bulk_read(dev, data, len_in, 1); + + lme2510_usb_talk(d, data, sizeof(data), data, sizeof(data)); return; } -static int lme_firmware_switch(struct usb_device *udev, int cold) +static const char fw_c_s7395[] = LME2510_C_S7395; +static const char fw_c_lg[] = LME2510_C_LG; +static const char fw_c_s0194[] = LME2510_C_S0194; +static const char fw_c_rs2000[] = LME2510_C_RS2000; +static const char fw_lg[] = LME2510_LG; +static const char fw_s0194[] = LME2510_S0194; + +const char *lme_firmware_switch(struct dvb_usb_device *d, int cold) { + struct lme2510_state *st = d->priv; + struct usb_device *udev = d->udev; const struct firmware *fw = NULL; - const char fw_c_s7395[] = "dvb-usb-lme2510c-s7395.fw"; - const char fw_c_lg[] = "dvb-usb-lme2510c-lg.fw"; - const char fw_c_s0194[] = "dvb-usb-lme2510c-s0194.fw"; - const char fw_c_rs2000[] = "dvb-usb-lme2510c-rs2000.fw"; - const char fw_lg[] = "dvb-usb-lme2510-lg.fw"; - const char fw_s0194[] = "dvb-usb-lme2510-s0194.fw"; const char *fw_lme; - int ret = 0, cold_fw; + int ret = 0; cold = (cold > 0) ? (cold & 1) : 0; - cold_fw = !cold; - switch (le16_to_cpu(udev->descriptor.idProduct)) { case 0x1122: - switch (dvb_usb_lme2510_firmware) { + switch (st->dvb_usb_lme2510_firmware) { default: - dvb_usb_lme2510_firmware = TUNER_S0194; + st->dvb_usb_lme2510_firmware = TUNER_S0194; case TUNER_S0194: fw_lme = fw_s0194; ret = request_firmware(&fw, fw_lme, &udev->dev); @@ -831,23 +821,20 @@ static int lme_firmware_switch(struct usb_device *udev, int cold) cold = 0; break; } - dvb_usb_lme2510_firmware = TUNER_LG; + st->dvb_usb_lme2510_firmware = TUNER_LG; case TUNER_LG: fw_lme = fw_lg; ret = request_firmware(&fw, fw_lme, &udev->dev); if (ret == 0) break; - info("FRM No Firmware Found - please install"); - dvb_usb_lme2510_firmware = TUNER_DEFAULT; - cold = 0; - cold_fw = 0; + st->dvb_usb_lme2510_firmware = TUNER_DEFAULT; break; } break; case 0x1120: - switch (dvb_usb_lme2510_firmware) { + switch (st->dvb_usb_lme2510_firmware) { default: - dvb_usb_lme2510_firmware = TUNER_S7395; + st->dvb_usb_lme2510_firmware = TUNER_S7395; case TUNER_S7395: fw_lme = fw_c_s7395; ret = request_firmware(&fw, fw_lme, &udev->dev); @@ -855,49 +842,41 @@ static int lme_firmware_switch(struct usb_device *udev, int cold) cold = 0; break; } - dvb_usb_lme2510_firmware = TUNER_LG; + st->dvb_usb_lme2510_firmware = TUNER_LG; case TUNER_LG: fw_lme = fw_c_lg; ret = request_firmware(&fw, fw_lme, &udev->dev); if (ret == 0) break; - dvb_usb_lme2510_firmware = TUNER_S0194; + st->dvb_usb_lme2510_firmware = TUNER_S0194; case TUNER_S0194: fw_lme = fw_c_s0194; ret = request_firmware(&fw, fw_lme, &udev->dev); if (ret == 0) break; - info("FRM No Firmware Found - please install"); - dvb_usb_lme2510_firmware = TUNER_DEFAULT; + st->dvb_usb_lme2510_firmware = TUNER_DEFAULT; cold = 0; - cold_fw = 0; break; } break; case 0x22f0: fw_lme = fw_c_rs2000; - ret = request_firmware(&fw, fw_lme, &udev->dev); - dvb_usb_lme2510_firmware = TUNER_RS2000; + st->dvb_usb_lme2510_firmware = TUNER_RS2000; break; default: fw_lme = fw_c_s7395; } - - if (cold_fw) { - info("FRM Loading %s file", fw_lme); - ret = lme2510_download_firmware(udev, fw); - } - release_firmware(fw); if (cold) { + dvb_usb_lme2510_firmware = st->dvb_usb_lme2510_firmware; info("FRM Changing to %s firmware", fw_lme); - lme_coldreset(udev); - return -ENODEV; + lme_coldreset(d); + return NULL; } - return ret; + return fw_lme; } static int lme2510_kill_urb(struct usb_data_stream *stream) @@ -949,8 +928,8 @@ static struct stv0299_config sharp_z0194_config = { static int dm04_rs2000_set_ts_param(struct dvb_frontend *fe, int caller) { - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dvb_usb_device *d = adap->dev; + struct dvb_usb_adapter *adap = fe_to_adap(fe); + struct dvb_usb_device *d = adap_to_d(adap); struct lme2510_state *st = d->priv; mutex_lock(&d->i2c_mutex); @@ -972,29 +951,35 @@ static struct m88rs2000_config m88rs2000_config = { static int dm04_lme2510_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { - struct dvb_usb_adapter *adap = fe->dvb->priv; - static u8 voltage_low[] = LME_VOLTAGE_L; + struct dvb_usb_device *d = fe_to_d(fe); + struct lme2510_state *st = fe_to_priv(fe); + static u8 voltage_low[] = LME_VOLTAGE_L; static u8 voltage_high[] = LME_VOLTAGE_H; static u8 rbuf[1]; int ret = 0, len = 3, rlen = 1; - mutex_lock(&adap->dev->i2c_mutex); + mutex_lock(&d->i2c_mutex); switch (voltage) { case SEC_VOLTAGE_18: - ret |= lme2510_usb_talk(adap->dev, + ret |= lme2510_usb_talk(d, voltage_high, len, rbuf, rlen); break; case SEC_VOLTAGE_OFF: case SEC_VOLTAGE_13: default: - ret |= lme2510_usb_talk(adap->dev, + ret |= lme2510_usb_talk(d, voltage_low, len, rbuf, rlen); break; } - mutex_unlock(&adap->dev->i2c_mutex); + mutex_unlock(&d->i2c_mutex); + + if (st->tuner_config == TUNER_RS2000) + if (st->fe_set_voltage) + st->fe_set_voltage(fe, voltage); + return (ret < 0) ? -ENODEV : 0; } @@ -1002,29 +987,44 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe, static int dm04_rs2000_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct lme2510_state *st = adap->dev->priv; + struct lme2510_state *st = fe_to_priv(fe); + + *strength = (u16)((u32)st->signal_level * 0xffff / 0xff); - *strength = (u16)((u32)st->signal_level * 0xffff / 0x7f); return 0; } static int dm04_rs2000_read_snr(struct dvb_frontend *fe, u16 *snr) { - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct lme2510_state *st = adap->dev->priv; + struct lme2510_state *st = fe_to_priv(fe); + + *snr = (u16)((u32)st->signal_sn * 0xffff / 0x7f); + + return 0; +} + +static int dm04_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + *ber = 0; + + return 0; +} + +static int dm04_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; - *snr = (u16)((u32)st->signal_sn * 0xffff / 0xff); return 0; } static int lme_name(struct dvb_usb_adapter *adap) { - struct lme2510_state *st = adap->dev->priv; - const char *desc = adap->dev->desc->name; + struct dvb_usb_device *d = adap_to_d(adap); + struct lme2510_state *st = adap_to_priv(adap); + const char *desc = d->name; char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395", " SHARP:BS2F7HZ0194", " RS2000"}; - char *name = adap->fe_adap[0].fe->ops.info.name; + char *name = adap->fe[0]->ops.info.name; strlcpy(name, desc, 128); strlcat(name, fe_name[st->tuner_config], 128); @@ -1034,120 +1034,128 @@ static int lme_name(struct dvb_usb_adapter *adap) static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap) { - struct lme2510_state *st = adap->dev->priv; - + struct dvb_usb_device *d = adap_to_d(adap); + struct lme2510_state *st = d->priv; int ret = 0; st->i2c_talk_onoff = 1; - switch (le16_to_cpu(adap->dev->udev->descriptor.idProduct)) { + switch (le16_to_cpu(d->udev->descriptor.idProduct)) { case 0x1122: case 0x1120: st->i2c_gate = 4; - adap->fe_adap[0].fe = dvb_attach(tda10086_attach, - &tda10086_config, &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe) { + adap->fe[0] = dvb_attach(tda10086_attach, + &tda10086_config, &d->i2c_adap); + if (adap->fe[0]) { info("TUN Found Frontend TDA10086"); st->i2c_tuner_gate_w = 4; st->i2c_tuner_gate_r = 4; st->i2c_tuner_addr = 0xc0; st->tuner_config = TUNER_LG; - if (dvb_usb_lme2510_firmware != TUNER_LG) { - dvb_usb_lme2510_firmware = TUNER_LG; - ret = lme_firmware_switch(adap->dev->udev, 1); + if (st->dvb_usb_lme2510_firmware != TUNER_LG) { + st->dvb_usb_lme2510_firmware = TUNER_LG; + ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV; } break; } st->i2c_gate = 4; - adap->fe_adap[0].fe = dvb_attach(stv0299_attach, - &sharp_z0194_config, &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe) { + adap->fe[0] = dvb_attach(stv0299_attach, + &sharp_z0194_config, &d->i2c_adap); + if (adap->fe[0]) { info("FE Found Stv0299"); st->i2c_tuner_gate_w = 4; st->i2c_tuner_gate_r = 5; st->i2c_tuner_addr = 0xc0; st->tuner_config = TUNER_S0194; - if (dvb_usb_lme2510_firmware != TUNER_S0194) { - dvb_usb_lme2510_firmware = TUNER_S0194; - ret = lme_firmware_switch(adap->dev->udev, 1); + if (st->dvb_usb_lme2510_firmware != TUNER_S0194) { + st->dvb_usb_lme2510_firmware = TUNER_S0194; + ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV; } break; } st->i2c_gate = 5; - adap->fe_adap[0].fe = dvb_attach(stv0288_attach, &lme_config, - &adap->dev->i2c_adap); + adap->fe[0] = dvb_attach(stv0288_attach, &lme_config, + &d->i2c_adap); - if (adap->fe_adap[0].fe) { + if (adap->fe[0]) { info("FE Found Stv0288"); st->i2c_tuner_gate_w = 4; st->i2c_tuner_gate_r = 5; st->i2c_tuner_addr = 0xc0; st->tuner_config = TUNER_S7395; - if (dvb_usb_lme2510_firmware != TUNER_S7395) { - dvb_usb_lme2510_firmware = TUNER_S7395; - ret = lme_firmware_switch(adap->dev->udev, 1); + if (st->dvb_usb_lme2510_firmware != TUNER_S7395) { + st->dvb_usb_lme2510_firmware = TUNER_S7395; + ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV; } break; } case 0x22f0: st->i2c_gate = 5; - adap->fe_adap[0].fe = dvb_attach(m88rs2000_attach, - &m88rs2000_config, &adap->dev->i2c_adap); + adap->fe[0] = dvb_attach(m88rs2000_attach, + &m88rs2000_config, &d->i2c_adap); - if (adap->fe_adap[0].fe) { + if (adap->fe[0]) { info("FE Found M88RS2000"); st->i2c_tuner_gate_w = 5; st->i2c_tuner_gate_r = 5; st->i2c_tuner_addr = 0xc0; st->tuner_config = TUNER_RS2000; - adap->fe_adap[0].fe->ops.read_signal_strength = + st->fe_set_voltage = + adap->fe[0]->ops.set_voltage; + + adap->fe[0]->ops.read_signal_strength = dm04_rs2000_read_signal_strength; - adap->fe_adap[0].fe->ops.read_snr = + adap->fe[0]->ops.read_snr = dm04_rs2000_read_snr; + adap->fe[0]->ops.read_ber = + dm04_read_ber; + adap->fe[0]->ops.read_ucblocks = + dm04_read_ucblocks; } break; } - if (adap->fe_adap[0].fe == NULL) { - info("DM04/QQBOX Not Powered up or not Supported"); - return -ENODEV; + if (adap->fe[0] == NULL) { + info("DM04/QQBOX Not Powered up or not Supported"); + return -ENODEV; } if (ret) { - if (adap->fe_adap[0].fe) { - dvb_frontend_detach(adap->fe_adap[0].fe); - adap->fe_adap[0].fe = NULL; + if (adap->fe[0]) { + dvb_frontend_detach(adap->fe[0]); + adap->fe[0] = NULL; } - adap->dev->props.rc.core.rc_codes = NULL; + d->rc_map = NULL; return -ENODEV; } - adap->fe_adap[0].fe->ops.set_voltage = dm04_lme2510_set_voltage; + adap->fe[0]->ops.set_voltage = dm04_lme2510_set_voltage; ret = lme_name(adap); return ret; } static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap) { - struct lme2510_state *st = adap->dev->priv; + struct dvb_usb_device *d = adap_to_d(adap); + struct lme2510_state *st = adap_to_priv(adap); char *tun_msg[] = {"", "TDA8263", "IX2505V", "DVB_PLL_OPERA", "RS2000"}; int ret = 0; switch (st->tuner_config) { case TUNER_LG: - if (dvb_attach(tda826x_attach, adap->fe_adap[0].fe, 0xc0, - &adap->dev->i2c_adap, 1)) + if (dvb_attach(tda826x_attach, adap->fe[0], 0xc0, + &d->i2c_adap, 1)) ret = st->tuner_config; break; case TUNER_S7395: - if (dvb_attach(ix2505v_attach , adap->fe_adap[0].fe, &lme_tuner, - &adap->dev->i2c_adap)) + if (dvb_attach(ix2505v_attach , adap->fe[0], &lme_tuner, + &d->i2c_adap)) ret = st->tuner_config; break; case TUNER_S0194: - if (dvb_attach(dvb_pll_attach , adap->fe_adap[0].fe, 0xc0, - &adap->dev->i2c_adap, DVB_PLL_OPERA1)) + if (dvb_attach(dvb_pll_attach , adap->fe[0], 0xc0, + &d->i2c_adap, DVB_PLL_OPERA1)) ret = st->tuner_config; break; case TUNER_RS2000: @@ -1161,7 +1169,7 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap) info("TUN Found %s tuner", tun_msg[ret]); else { info("TUN No tuner found --- resetting device"); - lme_coldreset(adap->dev->udev); + lme_coldreset(d); return -ENODEV; } @@ -1197,158 +1205,57 @@ static int lme2510_powerup(struct dvb_usb_device *d, int onoff) return ret; } -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties lme2510_properties; -static struct dvb_usb_device_properties lme2510c_properties; - -static int lme2510_probe(struct usb_interface *intf, - const struct usb_device_id *id) +static int lme2510_get_adapter_count(struct dvb_usb_device *d) { - struct usb_device *udev = interface_to_usbdev(intf); + return 1; +} - usb_reset_configuration(udev); +static int lme2510_identify_state(struct dvb_usb_device *d, const char **name) +{ + struct lme2510_state *st = d->priv; - usb_set_interface(udev, intf->cur_altsetting->desc.bInterfaceNumber, 1); + usb_reset_configuration(d->udev); - if (udev->speed != USB_SPEED_HIGH) { - usb_reset_device(udev); - info("DEV Failed to connect in HIGH SPEED mode"); - return -ENODEV; - } + usb_set_interface(d->udev, + d->intf->cur_altsetting->desc.bInterfaceNumber, 1); - if (lme2510_return_status(udev) == 0x44) { - lme_firmware_switch(udev, 0); - return -ENODEV; - } + st->dvb_usb_lme2510_firmware = dvb_usb_lme2510_firmware; - if (0 == dvb_usb_device_init(intf, &lme2510_properties, - THIS_MODULE, NULL, adapter_nr)) { - info("DEV registering device driver"); - return 0; - } - if (0 == dvb_usb_device_init(intf, &lme2510c_properties, - THIS_MODULE, NULL, adapter_nr)) { - info("DEV registering device driver"); - return 0; + if (lme2510_return_status(d) == 0x44) { + *name = lme_firmware_switch(d, 0); + return COLD; } - info("DEV lme2510 Error"); - return -ENODEV; - + return 0; } -static struct usb_device_id lme2510_table[] = { - { USB_DEVICE(0x3344, 0x1122) }, /* LME2510 */ - { USB_DEVICE(0x3344, 0x1120) }, /* LME2510C */ - { USB_DEVICE(0x3344, 0x22f0) }, /* LME2510C RS2000 */ - {} /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, lme2510_table); - -static struct dvb_usb_device_properties lme2510_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .size_of_priv = sizeof(struct lme2510_state), - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER| - DVB_USB_ADAP_NEED_PID_FILTERING| - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .streaming_ctrl = lme2510_streaming_ctrl, - .pid_filter_count = 32, - .pid_filter = lme2510_pid_filter, - .pid_filter_ctrl = lme2510_pid_filter_ctrl, - .frontend_attach = dm04_lme2510_frontend_attach, - .tuner_attach = dm04_lme2510_tuner, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 10, - .endpoint = 0x06, - .u = { - .bulk = { - .buffersize = 4096, - - } - } - } - }}, - } - }, - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "LME2510 Remote Control", - .allowed_protos = RC_TYPE_NEC, - .rc_codes = RC_MAP_LME2510, - }, - .power_ctrl = lme2510_powerup, - .identify_state = lme2510_identify_state, - .i2c_algo = &lme2510_i2c_algo, - .generic_bulk_ctrl_endpoint = 0, - .num_device_descs = 1, - .devices = { - { "DM04_LME2510_DVB-S", - { &lme2510_table[0], NULL }, - }, +static int lme2510_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, + struct usb_data_stream_properties *stream) +{ + struct dvb_usb_adapter *adap = fe_to_adap(fe); + struct dvb_usb_device *d = adap_to_d(adap); + if (adap == NULL) + return 0; + /* Turn PID filter on the fly by module option */ + if (pid_filter == 2) { + adap->pid_filtering = 1; + adap->max_feed_count = 15; } -}; -static struct dvb_usb_device_properties lme2510c_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .size_of_priv = sizeof(struct lme2510_state), - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER| - DVB_USB_ADAP_NEED_PID_FILTERING| - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .streaming_ctrl = lme2510_streaming_ctrl, - .pid_filter_count = 32, - .pid_filter = lme2510_pid_filter, - .pid_filter_ctrl = lme2510_pid_filter_ctrl, - .frontend_attach = dm04_lme2510_frontend_attach, - .tuner_attach = dm04_lme2510_tuner, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 10, - .endpoint = 0x8, - .u = { - .bulk = { - .buffersize = 4096, + if (!(le16_to_cpu(d->udev->descriptor.idProduct) + == 0x1122)) + stream->endpoint = 0x8; - } - } - } - }}, - } - }, - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "LME2510 Remote Control", - .allowed_protos = RC_TYPE_NEC, - .rc_codes = RC_MAP_LME2510, - }, - .power_ctrl = lme2510_powerup, - .identify_state = lme2510_identify_state, - .i2c_algo = &lme2510_i2c_algo, - .generic_bulk_ctrl_endpoint = 0, - .num_device_descs = 2, - .devices = { - { "DM04_LME2510C_DVB-S", - { &lme2510_table[1], NULL }, - }, - { "DM04_LME2510C_DVB-S RS2000", - { &lme2510_table[2], NULL }, - }, - } -}; + return 0; +} + +static int lme2510_get_rc_config(struct dvb_usb_device *d, + struct dvb_usb_rc *rc) +{ + rc->allowed_protos = RC_TYPE_NEC; + return 0; +} static void *lme2510_exit_int(struct dvb_usb_device *d) { @@ -1357,8 +1264,7 @@ static void *lme2510_exit_int(struct dvb_usb_device *d) void *buffer = NULL; if (adap != NULL) { - lme2510_kill_urb(&adap->fe_adap[0].stream); - adap->feedcount = 0; + lme2510_kill_urb(&adap->stream); } if (st->usb_buffer != NULL) { @@ -1379,29 +1285,85 @@ static void *lme2510_exit_int(struct dvb_usb_device *d) return buffer; } -static void lme2510_exit(struct usb_interface *intf) +static void lme2510_exit(struct dvb_usb_device *d) { - struct dvb_usb_device *d = usb_get_intfdata(intf); void *usb_buffer; if (d != NULL) { usb_buffer = lme2510_exit_int(d); - dvb_usb_device_exit(intf); if (usb_buffer != NULL) kfree(usb_buffer); } } +static struct dvb_usb_device_properties lme2510_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .bInterfaceNumber = 0, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct lme2510_state), + + .download_firmware = lme2510_download_firmware, + + .power_ctrl = lme2510_powerup, + .identify_state = lme2510_identify_state, + .i2c_algo = &lme2510_i2c_algo, + + .frontend_attach = dm04_lme2510_frontend_attach, + .tuner_attach = dm04_lme2510_tuner, + .get_stream_config = lme2510_get_stream_config, + .get_adapter_count = lme2510_get_adapter_count, + .streaming_ctrl = lme2510_streaming_ctrl, + + .get_rc_config = lme2510_get_rc_config, + + .exit = lme2510_exit, + .adapter = { + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER| + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 15, + .pid_filter = lme2510_pid_filter, + .pid_filter_ctrl = lme2510_pid_filter_ctrl, + .stream = + DVB_USB_STREAM_BULK(0x86, 10, 4096), + }, + { + } + }, +}; + +static const struct usb_device_id lme2510_id_table[] = { + { DVB_USB_DEVICE(0x3344, 0x1122, &lme2510_props, + "DM04_LME2510_DVB-S", RC_MAP_LME2510) }, + { DVB_USB_DEVICE(0x3344, 0x1120, &lme2510_props, + "DM04_LME2510C_DVB-S", RC_MAP_LME2510) }, + { DVB_USB_DEVICE(0x3344, 0x22f0, &lme2510_props, + "DM04_LME2510C_DVB-S RS2000", RC_MAP_LME2510) }, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, lme2510_id_table); + static struct usb_driver lme2510_driver = { - .name = "LME2510C_DVB-S", - .probe = lme2510_probe, - .disconnect = lme2510_exit, - .id_table = lme2510_table, + .name = KBUILD_MODNAME, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .id_table = lme2510_id_table, + .no_dynamic_id = 1, + .soft_unbind = 1, }; module_usb_driver(lme2510_driver); MODULE_AUTHOR("Malcolm Priestley "); MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0"); -MODULE_VERSION("1.99"); +MODULE_VERSION("2.06"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(LME2510_C_S7395); +MODULE_FIRMWARE(LME2510_C_LG); +MODULE_FIRMWARE(LME2510_C_S0194); +MODULE_FIRMWARE(LME2510_C_RS2000); +MODULE_FIRMWARE(LME2510_LG); +MODULE_FIRMWARE(LME2510_S0194); + diff --git a/drivers/media/dvb/dvb-usb/lmedm04.h b/drivers/media/usb/dvb-usb-v2/lmedm04.h similarity index 100% rename from drivers/media/dvb/dvb-usb/lmedm04.h rename to drivers/media/usb/dvb-usb-v2/lmedm04.h diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-demod.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c similarity index 100% rename from drivers/media/dvb/dvb-usb/mxl111sf-demod.c rename to drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-demod.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h similarity index 100% rename from drivers/media/dvb/dvb-usb/mxl111sf-demod.h rename to drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c similarity index 100% rename from drivers/media/dvb/dvb-usb/mxl111sf-gpio.c rename to drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h similarity index 100% rename from drivers/media/dvb/dvb-usb/mxl111sf-gpio.h rename to drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c similarity index 100% rename from drivers/media/dvb/dvb-usb/mxl111sf-i2c.c rename to drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h similarity index 100% rename from drivers/media/dvb/dvb-usb/mxl111sf-i2c.h rename to drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c similarity index 100% rename from drivers/media/dvb/dvb-usb/mxl111sf-phy.c rename to drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h similarity index 100% rename from drivers/media/dvb/dvb-usb/mxl111sf-phy.h rename to drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-reg.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h similarity index 100% rename from drivers/media/dvb/dvb-usb/mxl111sf-reg.h rename to drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c similarity index 99% rename from drivers/media/dvb/dvb-usb/mxl111sf-tuner.c rename to drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c index 74da5bb1ce99c5ab934e64d769adb38f32cd642d..ef4c65fcbb734ce6852dbd30856a5f3409849e86 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c @@ -31,6 +31,8 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); if (mxl111sf_tuner_debug) \ mxl_printk(KERN_DEBUG, fmt, ##arg) +#define err pr_err + /* ------------------------------------------------------------------------ */ struct mxl111sf_tuner_state { diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h similarity index 100% rename from drivers/media/dvb/dvb-usb/mxl111sf-tuner.h rename to drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c new file mode 100644 index 0000000000000000000000000000000000000000..efdcb15358f118ae3ebd0aae1aeb732ceecf1de3 --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c @@ -0,0 +1,1431 @@ +/* + * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ + +#include +#include + +#include "mxl111sf.h" +#include "mxl111sf-reg.h" +#include "mxl111sf-phy.h" +#include "mxl111sf-i2c.h" +#include "mxl111sf-gpio.h" + +#include "mxl111sf-demod.h" +#include "mxl111sf-tuner.h" + +#include "lgdt3305.h" +#include "lg2160.h" + +int dvb_usb_mxl111sf_debug; +module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level " + "(1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able))."); + +int dvb_usb_mxl111sf_isoc; +module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, 0644); +MODULE_PARM_DESC(isoc, "enable usb isoc xfer (0=bulk, 1=isoc)."); + +int dvb_usb_mxl111sf_spi; +module_param_named(spi, dvb_usb_mxl111sf_spi, int, 0644); +MODULE_PARM_DESC(spi, "use spi rather than tp for data xfer (0=tp, 1=spi)."); + +#define ANT_PATH_AUTO 0 +#define ANT_PATH_EXTERNAL 1 +#define ANT_PATH_INTERNAL 2 + +int dvb_usb_mxl111sf_rfswitch = +#if 0 + ANT_PATH_AUTO; +#else + ANT_PATH_EXTERNAL; +#endif + +module_param_named(rfswitch, dvb_usb_mxl111sf_rfswitch, int, 0644); +MODULE_PARM_DESC(rfswitch, "force rf switch position (0=auto, 1=ext, 2=int)."); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define deb_info pr_debug +#define deb_reg pr_debug +#define deb_adv pr_debug +#define err pr_err +#define info pr_info + +int mxl111sf_ctrl_msg(struct dvb_usb_device *d, + u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) +{ + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + int ret; + u8 sndbuf[1+wlen]; + + deb_adv("%s(wlen = %d, rlen = %d)\n", __func__, wlen, rlen); + + memset(sndbuf, 0, 1+wlen); + + sndbuf[0] = cmd; + memcpy(&sndbuf[1], wbuf, wlen); + + ret = (wo) ? dvb_usbv2_generic_write(d, sndbuf, 1+wlen) : + dvb_usbv2_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen); + mxl_fail(ret); + + return ret; +} + +/* ------------------------------------------------------------------------ */ + +#define MXL_CMD_REG_READ 0xaa +#define MXL_CMD_REG_WRITE 0x55 + +int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data) +{ + u8 buf[2]; + int ret; + + ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_READ, &addr, 1, buf, 2); + if (mxl_fail(ret)) { + mxl_debug("error reading reg: 0x%02x", addr); + goto fail; + } + + if (buf[0] == addr) + *data = buf[1]; + else { + err("invalid response reading reg: 0x%02x != 0x%02x, 0x%02x", + addr, buf[0], buf[1]); + ret = -EINVAL; + } + + deb_reg("R: (0x%02x, 0x%02x)\n", addr, *data); +fail: + return ret; +} + +int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data) +{ + u8 buf[] = { addr, data }; + int ret; + + deb_reg("W: (0x%02x, 0x%02x)\n", addr, data); + + ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_WRITE, buf, 2, NULL, 0); + if (mxl_fail(ret)) + err("error writing reg: 0x%02x, val: 0x%02x", addr, data); + return ret; +} + +/* ------------------------------------------------------------------------ */ + +int mxl111sf_write_reg_mask(struct mxl111sf_state *state, + u8 addr, u8 mask, u8 data) +{ + int ret; + u8 val; + + if (mask != 0xff) { + ret = mxl111sf_read_reg(state, addr, &val); +#if 1 + /* dont know why this usually errors out on the first try */ + if (mxl_fail(ret)) + err("error writing addr: 0x%02x, mask: 0x%02x, " + "data: 0x%02x, retrying...", addr, mask, data); + + ret = mxl111sf_read_reg(state, addr, &val); +#endif + if (mxl_fail(ret)) + goto fail; + } + val &= ~mask; + val |= data; + + ret = mxl111sf_write_reg(state, addr, val); + mxl_fail(ret); +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state, + struct mxl111sf_reg_ctrl_info *ctrl_reg_info) +{ + int i, ret = 0; + + for (i = 0; ctrl_reg_info[i].addr | + ctrl_reg_info[i].mask | + ctrl_reg_info[i].data; i++) { + + ret = mxl111sf_write_reg_mask(state, + ctrl_reg_info[i].addr, + ctrl_reg_info[i].mask, + ctrl_reg_info[i].data); + if (mxl_fail(ret)) { + err("failed on reg #%d (0x%02x)", i, + ctrl_reg_info[i].addr); + break; + } + } + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static int mxl1x1sf_get_chip_info(struct mxl111sf_state *state) +{ + int ret; + u8 id, ver; + char *mxl_chip, *mxl_rev; + + if ((state->chip_id) && (state->chip_ver)) + return 0; + + ret = mxl111sf_read_reg(state, CHIP_ID_REG, &id); + if (mxl_fail(ret)) + goto fail; + state->chip_id = id; + + ret = mxl111sf_read_reg(state, TOP_CHIP_REV_ID_REG, &ver); + if (mxl_fail(ret)) + goto fail; + state->chip_ver = ver; + + switch (id) { + case 0x61: + mxl_chip = "MxL101SF"; + break; + case 0x63: + mxl_chip = "MxL111SF"; + break; + default: + mxl_chip = "UNKNOWN MxL1X1"; + break; + } + switch (ver) { + case 0x36: + state->chip_rev = MXL111SF_V6; + mxl_rev = "v6"; + break; + case 0x08: + state->chip_rev = MXL111SF_V8_100; + mxl_rev = "v8_100"; + break; + case 0x18: + state->chip_rev = MXL111SF_V8_200; + mxl_rev = "v8_200"; + break; + default: + state->chip_rev = 0; + mxl_rev = "UNKNOWN REVISION"; + break; + } + info("%s detected, %s (0x%x)", mxl_chip, mxl_rev, ver); +fail: + return ret; +} + +#define get_chip_info(state) \ +({ \ + int ___ret; \ + ___ret = mxl1x1sf_get_chip_info(state); \ + if (mxl_fail(___ret)) { \ + mxl_debug("failed to get chip info" \ + " on first probe attempt"); \ + ___ret = mxl1x1sf_get_chip_info(state); \ + if (mxl_fail(___ret)) \ + err("failed to get chip info during probe"); \ + else \ + mxl_debug("probe needed a retry " \ + "in order to succeed."); \ + } \ + ___ret; \ +}) + +/* ------------------------------------------------------------------------ */ +#if 0 +static int mxl111sf_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + /* power control depends on which adapter is being woken: + * save this for init, instead, via mxl111sf_adap_fe_init */ + return 0; +} +#endif + +static int mxl111sf_adap_fe_init(struct dvb_frontend *fe) +{ + struct dvb_usb_device *d = fe_to_d(fe); + struct mxl111sf_state *state = fe_to_priv(fe); + struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id]; + int err; + + /* exit if we didnt initialize the driver yet */ + if (!state->chip_id) { + mxl_debug("driver not yet initialized, exit."); + goto fail; + } + + deb_info("%s()\n", __func__); + + mutex_lock(&state->fe_lock); + + state->alt_mode = adap_state->alt_mode; + + if (usb_set_interface(d->udev, 0, state->alt_mode) < 0) + err("set interface failed"); + + err = mxl1x1sf_soft_reset(state); + mxl_fail(err); + err = mxl111sf_init_tuner_demod(state); + mxl_fail(err); + err = mxl1x1sf_set_device_mode(state, adap_state->device_mode); + + mxl_fail(err); + mxl111sf_enable_usb_output(state); + mxl_fail(err); + mxl1x1sf_top_master_ctrl(state, 1); + mxl_fail(err); + + if ((MXL111SF_GPIO_MOD_DVBT != adap_state->gpio_mode) && + (state->chip_rev > MXL111SF_V6)) { + mxl111sf_config_pin_mux_modes(state, + PIN_MUX_TS_SPI_IN_MODE_1); + mxl_fail(err); + } + err = mxl111sf_init_port_expander(state); + if (!mxl_fail(err)) { + state->gpio_mode = adap_state->gpio_mode; + err = mxl111sf_gpio_mode_switch(state, state->gpio_mode); + mxl_fail(err); +#if 0 + err = fe->ops.init(fe); +#endif + msleep(100); /* add short delay after enabling + * the demod before touching it */ + } + + return (adap_state->fe_init) ? adap_state->fe_init(fe) : 0; +fail: + return -ENODEV; +} + +static int mxl111sf_adap_fe_sleep(struct dvb_frontend *fe) +{ + struct mxl111sf_state *state = fe_to_priv(fe); + struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id]; + int err; + + /* exit if we didnt initialize the driver yet */ + if (!state->chip_id) { + mxl_debug("driver not yet initialized, exit."); + goto fail; + } + + deb_info("%s()\n", __func__); + + err = (adap_state->fe_sleep) ? adap_state->fe_sleep(fe) : 0; + + mutex_unlock(&state->fe_lock); + + return err; +fail: + return -ENODEV; +} + + +static int mxl111sf_ep6_streaming_ctrl(struct dvb_frontend *fe, int onoff) +{ + struct mxl111sf_state *state = fe_to_priv(fe); + struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id]; + int ret = 0; + + deb_info("%s(%d)\n", __func__, onoff); + + if (onoff) { + ret = mxl111sf_enable_usb_output(state); + mxl_fail(ret); + ret = mxl111sf_config_mpeg_in(state, 1, 1, + adap_state->ep6_clockphase, + 0, 0); + mxl_fail(ret); +#if 0 + } else { + ret = mxl111sf_disable_656_port(state); + mxl_fail(ret); +#endif + } + + return ret; +} + +static int mxl111sf_ep5_streaming_ctrl(struct dvb_frontend *fe, int onoff) +{ + struct mxl111sf_state *state = fe_to_priv(fe); + int ret = 0; + + deb_info("%s(%d)\n", __func__, onoff); + + if (onoff) { + ret = mxl111sf_enable_usb_output(state); + mxl_fail(ret); + + ret = mxl111sf_init_i2s_port(state, 200); + mxl_fail(ret); + ret = mxl111sf_config_i2s(state, 0, 15); + mxl_fail(ret); + } else { + ret = mxl111sf_disable_i2s_port(state); + mxl_fail(ret); + } + if (state->chip_rev > MXL111SF_V6) + ret = mxl111sf_config_spi(state, onoff); + mxl_fail(ret); + + return ret; +} + +static int mxl111sf_ep4_streaming_ctrl(struct dvb_frontend *fe, int onoff) +{ + struct mxl111sf_state *state = fe_to_priv(fe); + int ret = 0; + + deb_info("%s(%d)\n", __func__, onoff); + + if (onoff) { + ret = mxl111sf_enable_usb_output(state); + mxl_fail(ret); + } + + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static struct lgdt3305_config hauppauge_lgdt3305_config = { + .i2c_addr = 0xb2 >> 1, + .mpeg_mode = LGDT3305_MPEG_SERIAL, + .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE, + .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, + .deny_i2c_rptr = 1, + .spectral_inversion = 0, + .qam_if_khz = 6000, + .vsb_if_khz = 6000, +}; + +static int mxl111sf_lgdt3305_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_id) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct mxl111sf_state *state = d_to_priv(d); + struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id]; + int ret; + + deb_adv("%s()\n", __func__); + + /* save a pointer to the dvb_usb_device in device state */ + state->d = d; + adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; + state->alt_mode = adap_state->alt_mode; + + if (usb_set_interface(d->udev, 0, state->alt_mode) < 0) + err("set interface failed"); + + state->gpio_mode = MXL111SF_GPIO_MOD_ATSC; + adap_state->gpio_mode = state->gpio_mode; + adap_state->device_mode = MXL_TUNER_MODE; + adap_state->ep6_clockphase = 1; + + ret = mxl1x1sf_soft_reset(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_init_tuner_demod(state); + if (mxl_fail(ret)) + goto fail; + + ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_enable_usb_output(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl1x1sf_top_master_ctrl(state, 1); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_init_port_expander(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); + if (mxl_fail(ret)) + goto fail; + + adap->fe[fe_id] = dvb_attach(lgdt3305_attach, + &hauppauge_lgdt3305_config, + &d->i2c_adap); + if (adap->fe[fe_id]) { + state->num_frontends++; + adap_state->fe_init = adap->fe[fe_id]->ops.init; + adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init; + adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep; + adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep; + return 0; + } + ret = -EIO; +fail: + return ret; +} + +static struct lg2160_config hauppauge_lg2160_config = { + .lg_chip = LG2160, + .i2c_addr = 0x1c >> 1, + .deny_i2c_rptr = 1, + .spectral_inversion = 0, + .if_khz = 6000, +}; + +static int mxl111sf_lg2160_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_id) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct mxl111sf_state *state = d_to_priv(d); + struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id]; + int ret; + + deb_adv("%s()\n", __func__); + + /* save a pointer to the dvb_usb_device in device state */ + state->d = d; + adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; + state->alt_mode = adap_state->alt_mode; + + if (usb_set_interface(d->udev, 0, state->alt_mode) < 0) + err("set interface failed"); + + state->gpio_mode = MXL111SF_GPIO_MOD_MH; + adap_state->gpio_mode = state->gpio_mode; + adap_state->device_mode = MXL_TUNER_MODE; + adap_state->ep6_clockphase = 1; + + ret = mxl1x1sf_soft_reset(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_init_tuner_demod(state); + if (mxl_fail(ret)) + goto fail; + + ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_enable_usb_output(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl1x1sf_top_master_ctrl(state, 1); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_init_port_expander(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); + if (mxl_fail(ret)) + goto fail; + + ret = get_chip_info(state); + if (mxl_fail(ret)) + goto fail; + + adap->fe[fe_id] = dvb_attach(lg2160_attach, + &hauppauge_lg2160_config, + &d->i2c_adap); + if (adap->fe[fe_id]) { + state->num_frontends++; + adap_state->fe_init = adap->fe[fe_id]->ops.init; + adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init; + adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep; + adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep; + return 0; + } + ret = -EIO; +fail: + return ret; +} + +static struct lg2160_config hauppauge_lg2161_1019_config = { + .lg_chip = LG2161_1019, + .i2c_addr = 0x1c >> 1, + .deny_i2c_rptr = 1, + .spectral_inversion = 0, + .if_khz = 6000, + .output_if = 2, /* LG2161_OIF_SPI_MAS */ +}; + +static struct lg2160_config hauppauge_lg2161_1040_config = { + .lg_chip = LG2161_1040, + .i2c_addr = 0x1c >> 1, + .deny_i2c_rptr = 1, + .spectral_inversion = 0, + .if_khz = 6000, + .output_if = 4, /* LG2161_OIF_SPI_MAS */ +}; + +static int mxl111sf_lg2161_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_id) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct mxl111sf_state *state = d_to_priv(d); + struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id]; + int ret; + + deb_adv("%s()\n", __func__); + + /* save a pointer to the dvb_usb_device in device state */ + state->d = d; + adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; + state->alt_mode = adap_state->alt_mode; + + if (usb_set_interface(d->udev, 0, state->alt_mode) < 0) + err("set interface failed"); + + state->gpio_mode = MXL111SF_GPIO_MOD_MH; + adap_state->gpio_mode = state->gpio_mode; + adap_state->device_mode = MXL_TUNER_MODE; + adap_state->ep6_clockphase = 1; + + ret = mxl1x1sf_soft_reset(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_init_tuner_demod(state); + if (mxl_fail(ret)) + goto fail; + + ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_enable_usb_output(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl1x1sf_top_master_ctrl(state, 1); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_init_port_expander(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); + if (mxl_fail(ret)) + goto fail; + + ret = get_chip_info(state); + if (mxl_fail(ret)) + goto fail; + + adap->fe[fe_id] = dvb_attach(lg2160_attach, + (MXL111SF_V8_200 == state->chip_rev) ? + &hauppauge_lg2161_1040_config : + &hauppauge_lg2161_1019_config, + &d->i2c_adap); + if (adap->fe[fe_id]) { + state->num_frontends++; + adap_state->fe_init = adap->fe[fe_id]->ops.init; + adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init; + adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep; + adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep; + return 0; + } + ret = -EIO; +fail: + return ret; +} + +static struct lg2160_config hauppauge_lg2161_1019_ep6_config = { + .lg_chip = LG2161_1019, + .i2c_addr = 0x1c >> 1, + .deny_i2c_rptr = 1, + .spectral_inversion = 0, + .if_khz = 6000, + .output_if = 1, /* LG2161_OIF_SERIAL_TS */ +}; + +static struct lg2160_config hauppauge_lg2161_1040_ep6_config = { + .lg_chip = LG2161_1040, + .i2c_addr = 0x1c >> 1, + .deny_i2c_rptr = 1, + .spectral_inversion = 0, + .if_khz = 6000, + .output_if = 7, /* LG2161_OIF_SERIAL_TS */ +}; + +static int mxl111sf_lg2161_ep6_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_id) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct mxl111sf_state *state = d_to_priv(d); + struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id]; + int ret; + + deb_adv("%s()\n", __func__); + + /* save a pointer to the dvb_usb_device in device state */ + state->d = d; + adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; + state->alt_mode = adap_state->alt_mode; + + if (usb_set_interface(d->udev, 0, state->alt_mode) < 0) + err("set interface failed"); + + state->gpio_mode = MXL111SF_GPIO_MOD_MH; + adap_state->gpio_mode = state->gpio_mode; + adap_state->device_mode = MXL_TUNER_MODE; + adap_state->ep6_clockphase = 0; + + ret = mxl1x1sf_soft_reset(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_init_tuner_demod(state); + if (mxl_fail(ret)) + goto fail; + + ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_enable_usb_output(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl1x1sf_top_master_ctrl(state, 1); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_init_port_expander(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); + if (mxl_fail(ret)) + goto fail; + + ret = get_chip_info(state); + if (mxl_fail(ret)) + goto fail; + + adap->fe[fe_id] = dvb_attach(lg2160_attach, + (MXL111SF_V8_200 == state->chip_rev) ? + &hauppauge_lg2161_1040_ep6_config : + &hauppauge_lg2161_1019_ep6_config, + &d->i2c_adap); + if (adap->fe[fe_id]) { + state->num_frontends++; + adap_state->fe_init = adap->fe[fe_id]->ops.init; + adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init; + adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep; + adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep; + return 0; + } + ret = -EIO; +fail: + return ret; +} + +static struct mxl111sf_demod_config mxl_demod_config = { + .read_reg = mxl111sf_read_reg, + .write_reg = mxl111sf_write_reg, + .program_regs = mxl111sf_ctrl_program_regs, +}; + +static int mxl111sf_attach_demod(struct dvb_usb_adapter *adap, u8 fe_id) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct mxl111sf_state *state = d_to_priv(d); + struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id]; + int ret; + + deb_adv("%s()\n", __func__); + + /* save a pointer to the dvb_usb_device in device state */ + state->d = d; + adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 1 : 2; + state->alt_mode = adap_state->alt_mode; + + if (usb_set_interface(d->udev, 0, state->alt_mode) < 0) + err("set interface failed"); + + state->gpio_mode = MXL111SF_GPIO_MOD_DVBT; + adap_state->gpio_mode = state->gpio_mode; + adap_state->device_mode = MXL_SOC_MODE; + adap_state->ep6_clockphase = 1; + + ret = mxl1x1sf_soft_reset(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_init_tuner_demod(state); + if (mxl_fail(ret)) + goto fail; + + ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_enable_usb_output(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl1x1sf_top_master_ctrl(state, 1); + if (mxl_fail(ret)) + goto fail; + + /* dont care if this fails */ + mxl111sf_init_port_expander(state); + + adap->fe[fe_id] = dvb_attach(mxl111sf_demod_attach, state, + &mxl_demod_config); + if (adap->fe[fe_id]) { + state->num_frontends++; + adap_state->fe_init = adap->fe[fe_id]->ops.init; + adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init; + adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep; + adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep; + return 0; + } + ret = -EIO; +fail: + return ret; +} + +static inline int mxl111sf_set_ant_path(struct mxl111sf_state *state, + int antpath) +{ + return mxl111sf_idac_config(state, 1, 1, + (antpath == ANT_PATH_INTERNAL) ? + 0x3f : 0x00, 0); +} + +#define DbgAntHunt(x, pwr0, pwr1, pwr2, pwr3) \ + err("%s(%d) FINAL input set to %s rxPwr:%d|%d|%d|%d\n", \ + __func__, __LINE__, \ + (ANT_PATH_EXTERNAL == x) ? "EXTERNAL" : "INTERNAL", \ + pwr0, pwr1, pwr2, pwr3) + +#define ANT_HUNT_SLEEP 90 +#define ANT_EXT_TWEAK 0 + +static int mxl111sf_ant_hunt(struct dvb_frontend *fe) +{ + struct mxl111sf_state *state = fe_to_priv(fe); + int antctrl = dvb_usb_mxl111sf_rfswitch; + + u16 rxPwrA, rxPwr0, rxPwr1, rxPwr2; + + /* FIXME: must force EXTERNAL for QAM - done elsewhere */ + mxl111sf_set_ant_path(state, antctrl == ANT_PATH_AUTO ? + ANT_PATH_EXTERNAL : antctrl); + + if (antctrl == ANT_PATH_AUTO) { +#if 0 + msleep(ANT_HUNT_SLEEP); +#endif + fe->ops.tuner_ops.get_rf_strength(fe, &rxPwrA); + + mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL); + msleep(ANT_HUNT_SLEEP); + fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr0); + + mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL); + msleep(ANT_HUNT_SLEEP); + fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr1); + + mxl111sf_set_ant_path(state, ANT_PATH_INTERNAL); + msleep(ANT_HUNT_SLEEP); + fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr2); + + if (rxPwr1+ANT_EXT_TWEAK >= rxPwr2) { + /* return with EXTERNAL enabled */ + mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL); + DbgAntHunt(ANT_PATH_EXTERNAL, rxPwrA, + rxPwr0, rxPwr1, rxPwr2); + } else { + /* return with INTERNAL enabled */ + DbgAntHunt(ANT_PATH_INTERNAL, rxPwrA, + rxPwr0, rxPwr1, rxPwr2); + } + } + return 0; +} + +static struct mxl111sf_tuner_config mxl_tuner_config = { + .if_freq = MXL_IF_6_0, /* applies to external IF output, only */ + .invert_spectrum = 0, + .read_reg = mxl111sf_read_reg, + .write_reg = mxl111sf_write_reg, + .program_regs = mxl111sf_ctrl_program_regs, + .top_master_ctrl = mxl1x1sf_top_master_ctrl, + .ant_hunt = mxl111sf_ant_hunt, +}; + +static int mxl111sf_attach_tuner(struct dvb_usb_adapter *adap) +{ + struct mxl111sf_state *state = adap_to_priv(adap); + int i; + + deb_adv("%s()\n", __func__); + + for (i = 0; i < state->num_frontends; i++) { + if (dvb_attach(mxl111sf_tuner_attach, adap->fe[i], state, + &mxl_tuner_config) == NULL) + return -EIO; + adap->fe[i]->ops.read_signal_strength = adap->fe[i]->ops.tuner_ops.get_rf_strength; + } + + return 0; +} + +static u32 mxl111sf_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +struct i2c_algorithm mxl111sf_i2c_algo = { + .master_xfer = mxl111sf_i2c_xfer, + .functionality = mxl111sf_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif +}; + +static int mxl111sf_init(struct dvb_usb_device *d) +{ + struct mxl111sf_state *state = d_to_priv(d); + int ret; + static u8 eeprom[256]; + struct i2c_client c; + + ret = get_chip_info(state); + if (mxl_fail(ret)) + err("failed to get chip info during probe"); + + mutex_init(&state->fe_lock); + + if (state->chip_rev > MXL111SF_V6) + mxl111sf_config_pin_mux_modes(state, PIN_MUX_TS_SPI_IN_MODE_1); + + c.adapter = &d->i2c_adap; + c.addr = 0xa0 >> 1; + + ret = tveeprom_read(&c, eeprom, sizeof(eeprom)); + if (mxl_fail(ret)) + return 0; + tveeprom_hauppauge_analog(&c, &state->tv, (0x84 == eeprom[0xa0]) ? + eeprom + 0xa0 : eeprom + 0x80); +#if 0 + switch (state->tv.model) { + case 117001: + case 126001: + case 138001: + break; + default: + printk(KERN_WARNING "%s: warning: " + "unknown hauppauge model #%d\n", + __func__, state->tv.model); + } +#endif + return 0; +} + +static int mxl111sf_frontend_attach_dvbt(struct dvb_usb_adapter *adap) +{ + return mxl111sf_attach_demod(adap, 0); +} + +static int mxl111sf_frontend_attach_atsc(struct dvb_usb_adapter *adap) +{ + return mxl111sf_lgdt3305_frontend_attach(adap, 0); +} + +static int mxl111sf_frontend_attach_mh(struct dvb_usb_adapter *adap) +{ + return mxl111sf_lg2160_frontend_attach(adap, 0); +} + +static int mxl111sf_frontend_attach_atsc_mh(struct dvb_usb_adapter *adap) +{ + int ret; + deb_info("%s\n", __func__); + + ret = mxl111sf_lgdt3305_frontend_attach(adap, 0); + if (ret < 0) + return ret; + + ret = mxl111sf_attach_demod(adap, 1); + if (ret < 0) + return ret; + + ret = mxl111sf_lg2160_frontend_attach(adap, 2); + if (ret < 0) + return ret; + + return ret; +} + +static int mxl111sf_frontend_attach_mercury(struct dvb_usb_adapter *adap) +{ + int ret; + deb_info("%s\n", __func__); + + ret = mxl111sf_lgdt3305_frontend_attach(adap, 0); + if (ret < 0) + return ret; + + ret = mxl111sf_attach_demod(adap, 1); + if (ret < 0) + return ret; + + ret = mxl111sf_lg2161_ep6_frontend_attach(adap, 2); + if (ret < 0) + return ret; + + return ret; +} + +static int mxl111sf_frontend_attach_mercury_mh(struct dvb_usb_adapter *adap) +{ + int ret; + deb_info("%s\n", __func__); + + ret = mxl111sf_attach_demod(adap, 0); + if (ret < 0) + return ret; + + if (dvb_usb_mxl111sf_spi) + ret = mxl111sf_lg2161_frontend_attach(adap, 1); + else + ret = mxl111sf_lg2161_ep6_frontend_attach(adap, 1); + + return ret; +} + +static void mxl111sf_stream_config_bulk(struct usb_data_stream_properties *stream, u8 endpoint) +{ + deb_info("%s: endpoint=%d size=8192\n", __func__, endpoint); + stream->type = USB_BULK; + stream->count = 5; + stream->endpoint = endpoint; + stream->u.bulk.buffersize = 8192; +} + +static void mxl111sf_stream_config_isoc(struct usb_data_stream_properties *stream, + u8 endpoint, int framesperurb, int framesize) +{ + deb_info("%s: endpoint=%d size=%d\n", __func__, endpoint, + framesperurb * framesize); + stream->type = USB_ISOC; + stream->count = 5; + stream->endpoint = endpoint; + stream->u.isoc.framesperurb = framesperurb; + stream->u.isoc.framesize = framesize; + stream->u.isoc.interval = 1; +} + +/* DVB USB Driver stuff */ + +/* dvbt mxl111sf + * bulk EP4/BULK/5/8192 + * isoc EP4/ISOC/5/96/564 + */ +static int mxl111sf_get_stream_config_dvbt(struct dvb_frontend *fe, + u8 *ts_type, struct usb_data_stream_properties *stream) +{ + deb_info("%s: fe=%d\n", __func__, fe->id); + + *ts_type = DVB_USB_FE_TS_TYPE_188; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 4, 96, 564); + else + mxl111sf_stream_config_bulk(stream, 4); + return 0; +} + +static struct dvb_usb_device_properties mxl111sf_props_dvbt = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct mxl111sf_state), + + .generic_bulk_ctrl_endpoint = 0x02, + .generic_bulk_ctrl_endpoint_response = 0x81, + + .i2c_algo = &mxl111sf_i2c_algo, + .frontend_attach = mxl111sf_frontend_attach_dvbt, + .tuner_attach = mxl111sf_attach_tuner, + .init = mxl111sf_init, + .streaming_ctrl = mxl111sf_ep4_streaming_ctrl, + .get_stream_config = mxl111sf_get_stream_config_dvbt, + + .num_adapters = 1, + .adapter = { + { + .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1), + } + } +}; + +/* atsc lgdt3305 + * bulk EP6/BULK/5/8192 + * isoc EP6/ISOC/5/24/3072 + */ +static int mxl111sf_get_stream_config_atsc(struct dvb_frontend *fe, + u8 *ts_type, struct usb_data_stream_properties *stream) +{ + deb_info("%s: fe=%d\n", __func__, fe->id); + + *ts_type = DVB_USB_FE_TS_TYPE_188; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 6, 24, 3072); + else + mxl111sf_stream_config_bulk(stream, 6); + return 0; +} + +static struct dvb_usb_device_properties mxl111sf_props_atsc = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct mxl111sf_state), + + .generic_bulk_ctrl_endpoint = 0x02, + .generic_bulk_ctrl_endpoint_response = 0x81, + + .i2c_algo = &mxl111sf_i2c_algo, + .frontend_attach = mxl111sf_frontend_attach_atsc, + .tuner_attach = mxl111sf_attach_tuner, + .init = mxl111sf_init, + .streaming_ctrl = mxl111sf_ep6_streaming_ctrl, + .get_stream_config = mxl111sf_get_stream_config_atsc, + + .num_adapters = 1, + .adapter = { + { + .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1), + } + } +}; + +/* mh lg2160 + * bulk EP5/BULK/5/8192/RAW + * isoc EP5/ISOC/5/96/200/RAW + */ +static int mxl111sf_get_stream_config_mh(struct dvb_frontend *fe, + u8 *ts_type, struct usb_data_stream_properties *stream) +{ + deb_info("%s: fe=%d\n", __func__, fe->id); + + *ts_type = DVB_USB_FE_TS_TYPE_RAW; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 5, 96, 200); + else + mxl111sf_stream_config_bulk(stream, 5); + return 0; +} + +static struct dvb_usb_device_properties mxl111sf_props_mh = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct mxl111sf_state), + + .generic_bulk_ctrl_endpoint = 0x02, + .generic_bulk_ctrl_endpoint_response = 0x81, + + .i2c_algo = &mxl111sf_i2c_algo, + .frontend_attach = mxl111sf_frontend_attach_mh, + .tuner_attach = mxl111sf_attach_tuner, + .init = mxl111sf_init, + .streaming_ctrl = mxl111sf_ep5_streaming_ctrl, + .get_stream_config = mxl111sf_get_stream_config_mh, + + .num_adapters = 1, + .adapter = { + { + .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1), + } + } +}; + +/* atsc mh lgdt3305 mxl111sf lg2160 + * bulk EP6/BULK/5/8192 EP4/BULK/5/8192 EP5/BULK/5/8192/RAW + * isoc EP6/ISOC/5/24/3072 EP4/ISOC/5/96/564 EP5/ISOC/5/96/200/RAW + */ +static int mxl111sf_get_stream_config_atsc_mh(struct dvb_frontend *fe, + u8 *ts_type, struct usb_data_stream_properties *stream) +{ + deb_info("%s: fe=%d\n", __func__, fe->id); + + if (fe->id == 0) { + *ts_type = DVB_USB_FE_TS_TYPE_188; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 6, 24, 3072); + else + mxl111sf_stream_config_bulk(stream, 6); + } else if (fe->id == 1) { + *ts_type = DVB_USB_FE_TS_TYPE_188; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 4, 96, 564); + else + mxl111sf_stream_config_bulk(stream, 4); + } else if (fe->id == 2) { + *ts_type = DVB_USB_FE_TS_TYPE_RAW; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 5, 96, 200); + else + mxl111sf_stream_config_bulk(stream, 5); + } + return 0; +} + +static int mxl111sf_streaming_ctrl_atsc_mh(struct dvb_frontend *fe, int onoff) +{ + deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff); + + if (fe->id == 0) + return mxl111sf_ep6_streaming_ctrl(fe, onoff); + else if (fe->id == 1) + return mxl111sf_ep4_streaming_ctrl(fe, onoff); + else if (fe->id == 2) + return mxl111sf_ep5_streaming_ctrl(fe, onoff); + return 0; +} + +static struct dvb_usb_device_properties mxl111sf_props_atsc_mh = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct mxl111sf_state), + + .generic_bulk_ctrl_endpoint = 0x02, + .generic_bulk_ctrl_endpoint_response = 0x81, + + .i2c_algo = &mxl111sf_i2c_algo, + .frontend_attach = mxl111sf_frontend_attach_atsc_mh, + .tuner_attach = mxl111sf_attach_tuner, + .init = mxl111sf_init, + .streaming_ctrl = mxl111sf_streaming_ctrl_atsc_mh, + .get_stream_config = mxl111sf_get_stream_config_atsc_mh, + + .num_adapters = 1, + .adapter = { + { + .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1), + } + } +}; + +/* mercury lgdt3305 mxl111sf lg2161 + * tp bulk EP6/BULK/5/8192 EP4/BULK/5/8192 EP6/BULK/5/8192/RAW + * tp isoc EP6/ISOC/5/24/3072 EP4/ISOC/5/96/564 EP6/ISOC/5/24/3072/RAW + * spi bulk EP6/BULK/5/8192 EP4/BULK/5/8192 EP5/BULK/5/8192/RAW + * spi isoc EP6/ISOC/5/24/3072 EP4/ISOC/5/96/564 EP5/ISOC/5/96/200/RAW + */ +static int mxl111sf_get_stream_config_mercury(struct dvb_frontend *fe, + u8 *ts_type, struct usb_data_stream_properties *stream) +{ + deb_info("%s: fe=%d\n", __func__, fe->id); + + if (fe->id == 0) { + *ts_type = DVB_USB_FE_TS_TYPE_188; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 6, 24, 3072); + else + mxl111sf_stream_config_bulk(stream, 6); + } else if (fe->id == 1) { + *ts_type = DVB_USB_FE_TS_TYPE_188; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 4, 96, 564); + else + mxl111sf_stream_config_bulk(stream, 4); + } else if (fe->id == 2 && dvb_usb_mxl111sf_spi) { + *ts_type = DVB_USB_FE_TS_TYPE_RAW; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 5, 96, 200); + else + mxl111sf_stream_config_bulk(stream, 5); + } else if (fe->id == 2 && !dvb_usb_mxl111sf_spi) { + *ts_type = DVB_USB_FE_TS_TYPE_RAW; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 6, 24, 3072); + else + mxl111sf_stream_config_bulk(stream, 6); + } + return 0; +} + +static int mxl111sf_streaming_ctrl_mercury(struct dvb_frontend *fe, int onoff) +{ + deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff); + + if (fe->id == 0) + return mxl111sf_ep6_streaming_ctrl(fe, onoff); + else if (fe->id == 1) + return mxl111sf_ep4_streaming_ctrl(fe, onoff); + else if (fe->id == 2 && dvb_usb_mxl111sf_spi) + return mxl111sf_ep5_streaming_ctrl(fe, onoff); + else if (fe->id == 2 && !dvb_usb_mxl111sf_spi) + return mxl111sf_ep6_streaming_ctrl(fe, onoff); + return 0; +} + +static struct dvb_usb_device_properties mxl111sf_props_mercury = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct mxl111sf_state), + + .generic_bulk_ctrl_endpoint = 0x02, + .generic_bulk_ctrl_endpoint_response = 0x81, + + .i2c_algo = &mxl111sf_i2c_algo, + .frontend_attach = mxl111sf_frontend_attach_mercury, + .tuner_attach = mxl111sf_attach_tuner, + .init = mxl111sf_init, + .streaming_ctrl = mxl111sf_streaming_ctrl_mercury, + .get_stream_config = mxl111sf_get_stream_config_mercury, + + .num_adapters = 1, + .adapter = { + { + .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1), + } + } +}; + +/* mercury mh mxl111sf lg2161 + * tp bulk EP4/BULK/5/8192 EP6/BULK/5/8192/RAW + * tp isoc EP4/ISOC/5/96/564 EP6/ISOC/5/24/3072/RAW + * spi bulk EP4/BULK/5/8192 EP5/BULK/5/8192/RAW + * spi isoc EP4/ISOC/5/96/564 EP5/ISOC/5/96/200/RAW + */ +static int mxl111sf_get_stream_config_mercury_mh(struct dvb_frontend *fe, + u8 *ts_type, struct usb_data_stream_properties *stream) +{ + deb_info("%s: fe=%d\n", __func__, fe->id); + + if (fe->id == 0) { + *ts_type = DVB_USB_FE_TS_TYPE_188; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 4, 96, 564); + else + mxl111sf_stream_config_bulk(stream, 4); + } else if (fe->id == 1 && dvb_usb_mxl111sf_spi) { + *ts_type = DVB_USB_FE_TS_TYPE_RAW; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 5, 96, 200); + else + mxl111sf_stream_config_bulk(stream, 5); + } else if (fe->id == 1 && !dvb_usb_mxl111sf_spi) { + *ts_type = DVB_USB_FE_TS_TYPE_RAW; + if (dvb_usb_mxl111sf_isoc) + mxl111sf_stream_config_isoc(stream, 6, 24, 3072); + else + mxl111sf_stream_config_bulk(stream, 6); + } + return 0; +} + +static int mxl111sf_streaming_ctrl_mercury_mh(struct dvb_frontend *fe, int onoff) +{ + deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff); + + if (fe->id == 0) + return mxl111sf_ep4_streaming_ctrl(fe, onoff); + else if (fe->id == 1 && dvb_usb_mxl111sf_spi) + return mxl111sf_ep5_streaming_ctrl(fe, onoff); + else if (fe->id == 1 && !dvb_usb_mxl111sf_spi) + return mxl111sf_ep6_streaming_ctrl(fe, onoff); + return 0; +} + +static struct dvb_usb_device_properties mxl111sf_props_mercury_mh = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct mxl111sf_state), + + .generic_bulk_ctrl_endpoint = 0x02, + .generic_bulk_ctrl_endpoint_response = 0x81, + + .i2c_algo = &mxl111sf_i2c_algo, + .frontend_attach = mxl111sf_frontend_attach_mercury_mh, + .tuner_attach = mxl111sf_attach_tuner, + .init = mxl111sf_init, + .streaming_ctrl = mxl111sf_streaming_ctrl_mercury_mh, + .get_stream_config = mxl111sf_get_stream_config_mercury_mh, + + .num_adapters = 1, + .adapter = { + { + .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1), + } + } +}; + +static const struct usb_device_id mxl111sf_id_table[] = { + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc600, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc601, &mxl111sf_props_atsc, "Hauppauge 126xxx ATSC", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc602, &mxl111sf_props_mh, "HCW 126xxx", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc603, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc604, &mxl111sf_props_dvbt, "Hauppauge 126xxx DVBT", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc609, &mxl111sf_props_atsc, "Hauppauge 126xxx ATSC", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60a, &mxl111sf_props_mh, "HCW 126xxx", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60b, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60c, &mxl111sf_props_dvbt, "Hauppauge 126xxx DVBT", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc653, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc65b, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb700, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb701, &mxl111sf_props_atsc, "Hauppauge 126xxx ATSC", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb702, &mxl111sf_props_mh, "HCW 117xxx", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb703, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb704, &mxl111sf_props_dvbt, "Hauppauge 117xxx DVBT", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb753, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb763, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb764, &mxl111sf_props_dvbt, "Hauppauge 117xxx DVBT", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd853, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd854, &mxl111sf_props_dvbt, "Hauppauge 138xxx DVBT", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd863, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd864, &mxl111sf_props_dvbt, "Hauppauge 138xxx DVBT", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d3, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d4, &mxl111sf_props_dvbt, "Hauppauge 138xxx DVBT", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e3, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e4, &mxl111sf_props_dvbt, "Hauppauge 138xxx DVBT", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8ff, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc612, &mxl111sf_props_mercury_mh, "Hauppauge 126xxx", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc613, &mxl111sf_props_mercury, "Hauppauge WinTV-Aero-M", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61a, &mxl111sf_props_mercury_mh, "Hauppauge 126xxx", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61b, &mxl111sf_props_mercury, "Hauppauge WinTV-Aero-M", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb757, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb767, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) }, + { } +}; +MODULE_DEVICE_TABLE(usb, mxl111sf_id_table); + +static struct usb_driver mxl111sf_usb_driver = { + .name = KBUILD_MODNAME, + .id_table = mxl111sf_id_table, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .no_dynamic_id = 1, + .soft_unbind = 1, +}; + +module_usb_driver(mxl111sf_usb_driver); + +MODULE_AUTHOR("Michael Krufky "); +MODULE_DESCRIPTION("Driver for MaxLinear MxL111SF"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.h b/drivers/media/usb/dvb-usb-v2/mxl111sf.h similarity index 98% rename from drivers/media/dvb/dvb-usb/mxl111sf.h rename to drivers/media/usb/dvb-usb-v2/mxl111sf.h index 364d89f826bd09318888175851cb3d357115f35f..9816de86e48cb4bd088c535b990d582db1e636db 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf.h +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.h @@ -15,7 +15,7 @@ #undef DVB_USB_LOG_PREFIX #endif #define DVB_USB_LOG_PREFIX "mxl111sf" -#include "dvb-usb.h" +#include "dvb_usb.h" #include #define MXL_EP1_REG_READ 1 @@ -39,6 +39,15 @@ enum mxl111sf_gpio_port_expander { mxl111sf_PCA9534, }; +struct mxl111sf_adap_state { + int alt_mode; + int gpio_mode; + int device_mode; + int ep6_clockphase; + int (*fe_init)(struct dvb_frontend *); + int (*fe_sleep)(struct dvb_frontend *); +}; + struct mxl111sf_state { struct dvb_usb_device *d; @@ -74,15 +83,8 @@ struct mxl111sf_state { struct tveeprom tv; struct mutex fe_lock; -}; - -struct mxl111sf_adap_state { - int alt_mode; - int gpio_mode; - int device_mode; - int ep6_clockphase; - int (*fe_init)(struct dvb_frontend *); - int (*fe_sleep)(struct dvb_frontend *); + u8 num_frontends; + struct mxl111sf_adap_state adap_state[3]; }; int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data); diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c similarity index 62% rename from drivers/media/dvb/dvb-usb/rtl28xxu.c rename to drivers/media/usb/dvb-usb-v2/rtl28xxu.c index 6bd0bd792437d38c2fd769470ddaa3a943f49016..adabba8d28bc80fa69b76348f40b83f63a680390 100644 --- a/drivers/media/dvb/dvb-usb/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -30,11 +30,10 @@ #include "mxl5005s.h" #include "fc0012.h" #include "fc0013.h" +#include "e4000.h" +#include "fc2580.h" +#include "tua9001.h" -/* debug */ -static int dvb_usb_rtl28xxu_debug; -module_param_named(debug, dvb_usb_rtl28xxu_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) @@ -63,12 +62,13 @@ static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value, req->index, buf, req->size, 1000); + + dvb_usb_dbg_usb_control_msg(d->udev, 0, requesttype, req->value, + req->index, buf, req->size); + if (ret > 0) ret = 0; - deb_dump(0, requesttype, req->value, req->index, buf, req->size, - deb_xfer); - /* read request, copy returned data to return buf */ if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) memcpy(req->data, buf, req->size); @@ -80,7 +80,7 @@ static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -130,6 +130,26 @@ static int rtl28xx_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val) return rtl2831_rd_regs(d, reg, val, 1); } +static int rtl28xx_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, + u8 mask) +{ + int ret; + u8 tmp; + + /* no need for read if whole reg is written */ + if (mask != 0xff) { + ret = rtl28xx_rd_reg(d, reg, &tmp); + if (ret) + return ret; + + val &= mask; + tmp &= ~mask; + val |= tmp; + } + + return rtl28xx_wr_reg(d, reg, val); +} + /* I2C */ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) @@ -254,54 +274,18 @@ static struct i2c_algorithm rtl28xxu_i2c_algo = { .functionality = rtl28xxu_i2c_func, }; -static struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, - .ts_mode = 0, - .spec_inv = 1, - .if_dvbt = 36150000, - .vtop = 0x20, - .krf = 0x04, - .agc_targ_val = 0x2d, - -}; - -static struct rtl2830_config rtl28xxu_rtl2830_qt1010_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, - .ts_mode = 0, - .spec_inv = 1, - .if_dvbt = 36125000, - .vtop = 0x20, - .krf = 0x04, - .agc_targ_val = 0x2d, -}; - -static struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, - .ts_mode = 0, - .spec_inv = 0, - .if_dvbt = 4570000, - .vtop = 0x3f, - .krf = 0x04, - .agc_targ_val = 0x3e, -}; - -static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) +static int rtl2831u_read_config(struct dvb_usb_device *d) { + struct rtl28xxu_priv *priv = d_to_priv(d); int ret; - struct rtl28xxu_priv *priv = adap->dev->priv; u8 buf[1]; - struct rtl2830_config *rtl2830_config; /* open RTL2831U/RTL2830 I2C gate */ - struct rtl28xxu_req req_gate = { 0x0120, 0x0011, 0x0001, "\x08" }; - /* for MT2060 tuner probe */ - struct rtl28xxu_req req_mt2060 = { 0x00c0, CMD_I2C_RD, 1, buf }; - /* for QT1010 tuner probe */ - struct rtl28xxu_req req_qt1010 = { 0x0fc4, CMD_I2C_RD, 1, buf }; + struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x08"}; + /* tuner probes */ + struct rtl28xxu_req req_mt2060 = {0x00c0, CMD_I2C_RD, 1, buf}; + struct rtl28xxu_req req_qt1010 = {0x0fc4, CMD_I2C_RD, 1, buf}; - deb_info("%s:\n", __func__); + dev_dbg(&d->udev->dev, "%s:\n", __func__); /* * RTL2831U GPIOs @@ -312,12 +296,12 @@ static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) */ /* GPIO direction */ - ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a); + ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, 0x0a); if (ret) goto err; /* enable as output GPIO0, GPIO2, GPIO4 */ - ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15); + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, 0x15); if (ret) goto err; @@ -329,59 +313,253 @@ static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) /* demod needs some time to wake up */ msleep(20); + priv->tuner_name = "NONE"; + /* open demod I2C gate */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate); + ret = rtl28xxu_ctrl_msg(d, &req_gate_open); if (ret) goto err; /* check QT1010 ID(?) register; reg=0f val=2c */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_qt1010); + ret = rtl28xxu_ctrl_msg(d, &req_qt1010); if (ret == 0 && buf[0] == 0x2c) { priv->tuner = TUNER_RTL2830_QT1010; - rtl2830_config = &rtl28xxu_rtl2830_qt1010_config; - deb_info("%s: QT1010\n", __func__); + priv->tuner_name = "QT1010"; goto found; - } else { - deb_info("%s: QT1010 probe failed=%d - %02x\n", - __func__, ret, buf[0]); } /* open demod I2C gate */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate); + ret = rtl28xxu_ctrl_msg(d, &req_gate_open); if (ret) goto err; /* check MT2060 ID register; reg=00 val=63 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2060); + ret = rtl28xxu_ctrl_msg(d, &req_mt2060); if (ret == 0 && buf[0] == 0x63) { priv->tuner = TUNER_RTL2830_MT2060; - rtl2830_config = &rtl28xxu_rtl2830_mt2060_config; - deb_info("%s: MT2060\n", __func__); + priv->tuner_name = "MT2060"; goto found; - } else { - deb_info("%s: MT2060 probe failed=%d - %02x\n", - __func__, ret, buf[0]); } /* assume MXL5005S */ - ret = 0; priv->tuner = TUNER_RTL2830_MXL5005S; - rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config; - deb_info("%s: MXL5005S\n", __func__); + priv->tuner_name = "MXL5005S"; goto found; found: + dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name); + + return 0; +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832u_read_config(struct dvb_usb_device *d) +{ + struct rtl28xxu_priv *priv = d_to_priv(d); + int ret; + u8 buf[2]; + /* open RTL2832U/RTL2832 I2C gate */ + struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"}; + /* close RTL2832U/RTL2832 I2C gate */ + struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"}; + /* tuner probes */ + struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf}; + struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf}; + struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf}; + struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf}; + struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf}; + struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf}; + struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf}; + struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf}; + struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf}; + struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf}; + + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + /* enable GPIO3 and GPIO6 as output */ + ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x40); + if (ret) + goto err; + + ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x48, 0x48); + if (ret) + goto err; + + /* + * Probe used tuner. We need to know used tuner before demod attach + * since there is some demod params needed to set according to tuner. + */ + + /* open demod I2C gate */ + ret = rtl28xxu_ctrl_msg(d, &req_gate_open); + if (ret) + goto err; + + priv->tuner_name = "NONE"; + + /* check FC0012 ID register; reg=00 val=a1 */ + ret = rtl28xxu_ctrl_msg(d, &req_fc0012); + if (ret == 0 && buf[0] == 0xa1) { + priv->tuner = TUNER_RTL2832_FC0012; + priv->tuner_name = "FC0012"; + goto found; + } + + /* check FC0013 ID register; reg=00 val=a3 */ + ret = rtl28xxu_ctrl_msg(d, &req_fc0013); + if (ret == 0 && buf[0] == 0xa3) { + priv->tuner = TUNER_RTL2832_FC0013; + priv->tuner_name = "FC0013"; + goto found; + } + + /* check MT2266 ID register; reg=00 val=85 */ + ret = rtl28xxu_ctrl_msg(d, &req_mt2266); + if (ret == 0 && buf[0] == 0x85) { + priv->tuner = TUNER_RTL2832_MT2266; + priv->tuner_name = "MT2266"; + goto found; + } + + /* check FC2580 ID register; reg=01 val=56 */ + ret = rtl28xxu_ctrl_msg(d, &req_fc2580); + if (ret == 0 && buf[0] == 0x56) { + priv->tuner = TUNER_RTL2832_FC2580; + priv->tuner_name = "FC2580"; + goto found; + } + + /* check MT2063 ID register; reg=00 val=9e || 9c */ + ret = rtl28xxu_ctrl_msg(d, &req_mt2063); + if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) { + priv->tuner = TUNER_RTL2832_MT2063; + priv->tuner_name = "MT2063"; + goto found; + } + + /* check MAX3543 ID register; reg=00 val=38 */ + ret = rtl28xxu_ctrl_msg(d, &req_max3543); + if (ret == 0 && buf[0] == 0x38) { + priv->tuner = TUNER_RTL2832_MAX3543; + priv->tuner_name = "MAX3543"; + goto found; + } + + /* check TUA9001 ID register; reg=7e val=2328 */ + ret = rtl28xxu_ctrl_msg(d, &req_tua9001); + if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) { + priv->tuner = TUNER_RTL2832_TUA9001; + priv->tuner_name = "TUA9001"; + goto found; + } + + /* check MXL5007R ID register; reg=d9 val=14 */ + ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t); + if (ret == 0 && buf[0] == 0x14) { + priv->tuner = TUNER_RTL2832_MXL5007T; + priv->tuner_name = "MXL5007T"; + goto found; + } + + /* check E4000 ID register; reg=02 val=40 */ + ret = rtl28xxu_ctrl_msg(d, &req_e4000); + if (ret == 0 && buf[0] == 0x40) { + priv->tuner = TUNER_RTL2832_E4000; + priv->tuner_name = "E4000"; + goto found; + } + + /* check TDA18272 ID register; reg=00 val=c760 */ + ret = rtl28xxu_ctrl_msg(d, &req_tda18272); + if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) { + priv->tuner = TUNER_RTL2832_TDA18272; + priv->tuner_name = "TDA18272"; + goto found; + } + +found: + dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name); + + /* close demod I2C gate */ + ret = rtl28xxu_ctrl_msg(d, &req_gate_close); + if (ret < 0) + goto err; + + return 0; +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} + +static struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .ts_mode = 0, + .spec_inv = 1, + .vtop = 0x20, + .krf = 0x04, + .agc_targ_val = 0x2d, + +}; + +static struct rtl2830_config rtl28xxu_rtl2830_qt1010_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .ts_mode = 0, + .spec_inv = 1, + .vtop = 0x20, + .krf = 0x04, + .agc_targ_val = 0x2d, +}; + +static struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .ts_mode = 0, + .spec_inv = 0, + .vtop = 0x3f, + .krf = 0x04, + .agc_targ_val = 0x3e, +}; + +static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct rtl28xxu_priv *priv = d_to_priv(d); + struct rtl2830_config *rtl2830_config; + int ret; + + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + switch (priv->tuner) { + case TUNER_RTL2830_QT1010: + rtl2830_config = &rtl28xxu_rtl2830_qt1010_config; + break; + case TUNER_RTL2830_MT2060: + rtl2830_config = &rtl28xxu_rtl2830_mt2060_config; + break; + case TUNER_RTL2830_MXL5005S: + rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config; + break; + default: + dev_err(&d->udev->dev, "%s: unknown tuner=%s\n", + KBUILD_MODNAME, priv->tuner_name); + ret = -ENODEV; + goto err; + } + /* attach demodulator */ - adap->fe_adap[0].fe = dvb_attach(rtl2830_attach, rtl2830_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe == NULL) { + adap->fe[0] = dvb_attach(rtl2830_attach, rtl2830_config, &d->i2c_adap); + if (!adap->fe[0]) { ret = -ENODEV; goto err; } - return ret; + return 0; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -399,13 +577,26 @@ static struct rtl2832_config rtl28xxu_rtl2832_fc0013_config = { .tuner = TUNER_RTL2832_FC0013 }; +static struct rtl2832_config rtl28xxu_rtl2832_tua9001_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .tuner = TUNER_RTL2832_TUA9001, +}; + +static struct rtl2832_config rtl28xxu_rtl2832_e4000_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .tuner = TUNER_RTL2832_E4000, +}; + static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) { int ret; u8 val; - deb_info("%s cmd=%d arg=%d\n", __func__, cmd, arg); + dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg); + switch (cmd) { case FC_FE_CALLBACK_VHF_ENABLE: /* set output values */ @@ -428,250 +619,135 @@ static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d, goto err; } return 0; - err: - err("%s: failed=%d\n", __func__, ret); - + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } - -static int rtl2832u_fc0013_tuner_callback(struct dvb_usb_device *d, +static int rtl2832u_tua9001_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) -{ - /* TODO implement*/ - return 0; -} - -static int rtl2832u_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) -{ - struct rtl28xxu_priv *priv = d->priv; - - switch (priv->tuner) { - case TUNER_RTL2832_FC0012: - return rtl2832u_fc0012_tuner_callback(d, cmd, arg); - - case TUNER_RTL2832_FC0013: - return rtl2832u_fc0013_tuner_callback(d, cmd, arg); - default: - break; - } - - return -ENODEV; -} - -static int rtl2832u_frontend_callback(void *adapter_priv, int component, - int cmd, int arg) -{ - struct i2c_adapter *adap = adapter_priv; - struct dvb_usb_device *d = i2c_get_adapdata(adap); - - switch (component) { - case DVB_FRONTEND_COMPONENT_TUNER: - return rtl2832u_tuner_callback(d, cmd, arg); - default: - break; - } - - return -EINVAL; -} - - - - -static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) { int ret; - struct rtl28xxu_priv *priv = adap->dev->priv; - struct rtl2832_config *rtl2832_config; - - u8 buf[2], val; - /* open RTL2832U/RTL2832 I2C gate */ - struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"}; - /* close RTL2832U/RTL2832 I2C gate */ - struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"}; - /* for FC0012 tuner probe */ - struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf}; - /* for FC0013 tuner probe */ - struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf}; - /* for MT2266 tuner probe */ - struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf}; - /* for FC2580 tuner probe */ - struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf}; - /* for MT2063 tuner probe */ - struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf}; - /* for MAX3543 tuner probe */ - struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf}; - /* for TUA9001 tuner probe */ - struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf}; - /* for MXL5007T tuner probe */ - struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf}; - /* for E4000 tuner probe */ - struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf}; - /* for TDA18272 tuner probe */ - struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf}; - - deb_info("%s:\n", __func__); - - - ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_DIR, &val); - if (ret) - goto err; - - val &= 0xbf; - - ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, val); - if (ret) - goto err; - - - /* enable as output GPIO3 and GPIO6*/ - ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_EN, &val); - if (ret) - goto err; - - val |= 0x48; - - ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, val); - if (ret) - goto err; - + u8 val; + dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg); /* - * Probe used tuner. We need to know used tuner before demod attach - * since there is some demod params needed to set according to tuner. - */ - - /* open demod I2C gate */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_open); - if (ret) - goto err; + * CEN always enabled by hardware wiring + * RESETN GPIO4 + * RXEN GPIO1 + */ - priv->tuner = TUNER_NONE; + switch (cmd) { + case TUA9001_CMD_RESETN: + if (arg) + val = (1 << 4); + else + val = (0 << 4); - /* check FC0012 ID register; reg=00 val=a1 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0012); - if (ret == 0 && buf[0] == 0xa1) { - priv->tuner = TUNER_RTL2832_FC0012; - rtl2832_config = &rtl28xxu_rtl2832_fc0012_config; - info("%s: FC0012 tuner found", __func__); - goto found; - } + ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x10); + if (ret) + goto err; + break; + case TUA9001_CMD_RXEN: + if (arg) + val = (1 << 1); + else + val = (0 << 1); - /* check FC0013 ID register; reg=00 val=a3 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0013); - if (ret == 0 && buf[0] == 0xa3) { - priv->tuner = TUNER_RTL2832_FC0013; - rtl2832_config = &rtl28xxu_rtl2832_fc0013_config; - info("%s: FC0013 tuner found", __func__); - goto found; + ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x02); + if (ret) + goto err; + break; } - /* check MT2266 ID register; reg=00 val=85 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2266); - if (ret == 0 && buf[0] == 0x85) { - priv->tuner = TUNER_RTL2832_MT2266; - /* TODO implement tuner */ - info("%s: MT2266 tuner found", __func__); - goto unsupported; - } + return 0; +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; +} - /* check FC2580 ID register; reg=01 val=56 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc2580); - if (ret == 0 && buf[0] == 0x56) { - priv->tuner = TUNER_RTL2832_FC2580; - /* TODO implement tuner */ - info("%s: FC2580 tuner found", __func__); - goto unsupported; - } +static int rtl2832u_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) +{ + struct rtl28xxu_priv *priv = d->priv; - /* check MT2063 ID register; reg=00 val=9e || 9c */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2063); - if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) { - priv->tuner = TUNER_RTL2832_MT2063; - /* TODO implement tuner */ - info("%s: MT2063 tuner found", __func__); - goto unsupported; + switch (priv->tuner) { + case TUNER_RTL2832_FC0012: + return rtl2832u_fc0012_tuner_callback(d, cmd, arg); + case TUNER_RTL2832_TUA9001: + return rtl2832u_tua9001_tuner_callback(d, cmd, arg); + default: + break; } - /* check MAX3543 ID register; reg=00 val=38 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_max3543); - if (ret == 0 && buf[0] == 0x38) { - priv->tuner = TUNER_RTL2832_MAX3543; - /* TODO implement tuner */ - info("%s: MAX3534 tuner found", __func__); - goto unsupported; - } + return 0; +} - /* check TUA9001 ID register; reg=7e val=2328 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_tua9001); - if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) { - priv->tuner = TUNER_RTL2832_TUA9001; - /* TODO implement tuner */ - info("%s: TUA9001 tuner found", __func__); - goto unsupported; - } +static int rtl2832u_frontend_callback(void *adapter_priv, int component, + int cmd, int arg) +{ + struct i2c_adapter *adap = adapter_priv; + struct dvb_usb_device *d = i2c_get_adapdata(adap); - /* check MXL5007R ID register; reg=d9 val=14 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_mxl5007t); - if (ret == 0 && buf[0] == 0x14) { - priv->tuner = TUNER_RTL2832_MXL5007T; - /* TODO implement tuner */ - info("%s: MXL5007T tuner found", __func__); - goto unsupported; - } + dev_dbg(&d->udev->dev, "%s: component=%d cmd=%d arg=%d\n", + __func__, component, cmd, arg); - /* check E4000 ID register; reg=02 val=40 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_e4000); - if (ret == 0 && buf[0] == 0x40) { - priv->tuner = TUNER_RTL2832_E4000; - /* TODO implement tuner */ - info("%s: E4000 tuner found", __func__); - goto unsupported; + switch (component) { + case DVB_FRONTEND_COMPONENT_TUNER: + return rtl2832u_tuner_callback(d, cmd, arg); + default: + break; } - /* check TDA18272 ID register; reg=00 val=c760 */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_tda18272); - if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) { - priv->tuner = TUNER_RTL2832_TDA18272; - /* TODO implement tuner */ - info("%s: TDA18272 tuner found", __func__); - goto unsupported; - } + return 0; +} -unsupported: - /* close demod I2C gate */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close); - if (ret) - goto err; +static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct dvb_usb_device *d = adap_to_d(adap); + struct rtl28xxu_priv *priv = d_to_priv(d); + struct rtl2832_config *rtl2832_config; - /* tuner not found */ - deb_info("No compatible tuner found"); - ret = -ENODEV; - return ret; + dev_dbg(&d->udev->dev, "%s:\n", __func__); -found: - /* close demod I2C gate */ - ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close); - if (ret) + switch (priv->tuner) { + case TUNER_RTL2832_FC0012: + rtl2832_config = &rtl28xxu_rtl2832_fc0012_config; + break; + case TUNER_RTL2832_FC0013: + rtl2832_config = &rtl28xxu_rtl2832_fc0013_config; + break; + case TUNER_RTL2832_FC2580: + /* FIXME: do not abuse fc0012 settings */ + rtl2832_config = &rtl28xxu_rtl2832_fc0012_config; + break; + case TUNER_RTL2832_TUA9001: + rtl2832_config = &rtl28xxu_rtl2832_tua9001_config; + break; + case TUNER_RTL2832_E4000: + rtl2832_config = &rtl28xxu_rtl2832_e4000_config; + break; + default: + dev_err(&d->udev->dev, "%s: unknown tuner=%s\n", + KBUILD_MODNAME, priv->tuner_name); + ret = -ENODEV; goto err; + } /* attach demodulator */ - adap->fe_adap[0].fe = dvb_attach(rtl2832_attach, rtl2832_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe == NULL) { - ret = -ENODEV; - goto err; - } - - /* set fe callbacks */ - adap->fe_adap[0].fe->callback = rtl2832u_frontend_callback; + adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config, &d->i2c_adap); + if (!adap->fe[0]) { + ret = -ENODEV; + goto err; + } - return ret; + /* set fe callback */ + adap->fe[0]->callback = rtl2832u_frontend_callback; + return 0; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -704,32 +780,34 @@ static struct mxl5005s_config rtl28xxu_mxl5005s_config = { static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap) { int ret; - struct rtl28xxu_priv *priv = adap->dev->priv; + struct dvb_usb_device *d = adap_to_d(adap); + struct rtl28xxu_priv *priv = d_to_priv(d); struct i2c_adapter *rtl2830_tuner_i2c; struct dvb_frontend *fe; - deb_info("%s:\n", __func__); + dev_dbg(&d->udev->dev, "%s:\n", __func__); /* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */ - rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe_adap[0].fe); + rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe[0]); switch (priv->tuner) { case TUNER_RTL2830_QT1010: - fe = dvb_attach(qt1010_attach, adap->fe_adap[0].fe, + fe = dvb_attach(qt1010_attach, adap->fe[0], rtl2830_tuner_i2c, &rtl28xxu_qt1010_config); break; case TUNER_RTL2830_MT2060: - fe = dvb_attach(mt2060_attach, adap->fe_adap[0].fe, + fe = dvb_attach(mt2060_attach, adap->fe[0], rtl2830_tuner_i2c, &rtl28xxu_mt2060_config, 1220); break; case TUNER_RTL2830_MXL5005S: - fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, + fe = dvb_attach(mxl5005s_attach, adap->fe[0], rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config); break; default: fe = NULL; - err("unknown tuner=%d", priv->tuner); + dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME, + priv->tuner); } if (fe == NULL) { @@ -739,40 +817,77 @@ static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap) return 0; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } +static const struct e4000_config rtl2832u_e4000_config = { + .i2c_addr = 0x64, + .clock = 28800000, +}; + +static const struct fc2580_config rtl2832u_fc2580_config = { + .i2c_addr = 0x56, + .clock = 16384000, +}; + +static struct tua9001_config rtl2832u_tua9001_config = { + .i2c_addr = 0x60, +}; + static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) { int ret; - struct rtl28xxu_priv *priv = adap->dev->priv; + struct dvb_usb_device *d = adap_to_d(adap); + struct rtl28xxu_priv *priv = d_to_priv(d); struct dvb_frontend *fe; - deb_info("%s:\n", __func__); + dev_dbg(&d->udev->dev, "%s:\n", __func__); switch (priv->tuner) { case TUNER_RTL2832_FC0012: - fe = dvb_attach(fc0012_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); + fe = dvb_attach(fc0012_attach, adap->fe[0], + &d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); /* since fc0012 includs reading the signal strength delegate * that to the tuner driver */ - adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0]. - fe->ops.tuner_ops.get_rf_strength; + adap->fe[0]->ops.read_signal_strength = + adap->fe[0]->ops.tuner_ops.get_rf_strength; return 0; break; case TUNER_RTL2832_FC0013: - fe = dvb_attach(fc0013_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); + fe = dvb_attach(fc0013_attach, adap->fe[0], + &d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); /* fc0013 also supports signal strength reading */ - adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0] - .fe->ops.tuner_ops.get_rf_strength; + adap->fe[0]->ops.read_signal_strength = + adap->fe[0]->ops.tuner_ops.get_rf_strength; return 0; + case TUNER_RTL2832_E4000: + fe = dvb_attach(e4000_attach, adap->fe[0], &d->i2c_adap, + &rtl2832u_e4000_config); + break; + case TUNER_RTL2832_FC2580: + fe = dvb_attach(fc2580_attach, adap->fe[0], &d->i2c_adap, + &rtl2832u_fc2580_config); + break; + case TUNER_RTL2832_TUA9001: + /* enable GPIO1 and GPIO4 as output */ + ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x12); + if (ret) + goto err; + + ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x12, 0x12); + if (ret) + goto err; + + fe = dvb_attach(tua9001_attach, adap->fe[0], &d->i2c_adap, + &rtl2832u_tua9001_config); + break; default: fe = NULL; - err("unknown tuner=%d", priv->tuner); + dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME, + priv->tuner); } if (fe == NULL) { @@ -782,77 +897,50 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) return 0; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -static int rtl2831u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff) +static int rtl28xxu_init(struct dvb_usb_device *d) { int ret; - u8 buf[2], gpio; + u8 val; - deb_info("%s: onoff=%d\n", __func__, onoff); + dev_dbg(&d->udev->dev, "%s:\n", __func__); - ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_VAL, &gpio); + /* init USB endpoints */ + ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val); if (ret) goto err; - if (onoff) { - buf[0] = 0x00; - buf[1] = 0x00; - gpio |= 0x04; /* LED on */ - } else { - buf[0] = 0x10; /* stall EPA */ - buf[1] = 0x02; /* reset EPA */ - gpio &= (~0x04); /* LED off */ - } - - ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_VAL, gpio); + /* enable DMA and Full Packet Mode*/ + val |= 0x09; + ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val); if (ret) goto err; - ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2); + /* set EPA maximum packet size to 0x0200 */ + ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); if (ret) goto err; - return ret; -err: - deb_info("%s: failed=%d\n", __func__, ret); - return ret; -} - -static int rtl2832u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff) -{ - int ret; - u8 buf[2]; - - deb_info("%s: onoff=%d\n", __func__, onoff); - - - if (onoff) { - buf[0] = 0x00; - buf[1] = 0x00; - } else { - buf[0] = 0x10; /* stall EPA */ - buf[1] = 0x02; /* reset EPA */ - } - - ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2); + /* change EPA FIFO length */ + ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); if (ret) goto err; return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) { int ret; - u8 gpio, sys0; + u8 gpio, sys0, epa_ctl[2]; - deb_info("%s: onoff=%d\n", __func__, onoff); + dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); /* demod adc */ ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0); @@ -864,20 +952,28 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) if (ret) goto err; - deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); + dev_dbg(&d->udev->dev, "%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, + sys0, gpio); if (onoff) { gpio |= 0x01; /* GPIO0 = 1 */ gpio &= (~0x10); /* GPIO4 = 0 */ + gpio |= 0x04; /* GPIO2 = 1, LED on */ sys0 = sys0 & 0x0f; sys0 |= 0xe0; + epa_ctl[0] = 0x00; /* clear stall */ + epa_ctl[1] = 0x00; /* clear reset */ } else { gpio &= (~0x01); /* GPIO0 = 0 */ gpio |= 0x10; /* GPIO4 = 1 */ + gpio &= (~0x04); /* GPIO2 = 1, LED off */ sys0 = sys0 & (~0xc0); + epa_ctl[0] = 0x10; /* set stall */ + epa_ctl[1] = 0x02; /* set reset */ } - deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); + dev_dbg(&d->udev->dev, "%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, + sys0, gpio); /* demod adc */ ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0); @@ -889,9 +985,17 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) if (ret) goto err; + /* streaming EP: stall & reset */ + ret = rtl28xx_wr_regs(d, USB_EPA_CTL, epa_ctl, 2); + if (ret) + goto err; + + if (onoff) + usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81)); + return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -900,7 +1004,7 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) int ret; u8 val; - deb_info("%s: onoff=%d\n", __func__, onoff); + dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); if (onoff) { /* set output values */ @@ -935,17 +1039,6 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) /* bit 7 to 1 */ val |= 0x80; - ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val); - if (ret) - goto err; - - /* demod HW reset */ - ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val); - if (ret) - goto err; - /* bit 5 to 0 */ - val &= 0xdf; - ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val); if (ret) goto err; @@ -973,7 +1066,14 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) if (ret) goto err; + /* streaming EP: clear stall & reset */ + ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x00\x00", 2); + if (ret) + goto err; + ret = usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81)); + if (ret) + goto err; } else { /* demod_ctl_1 */ ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val); @@ -1008,11 +1108,15 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) if (ret) goto err; + /* streaming EP: set stall & reset */ + ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x10\x02", 2); + if (ret) + goto err; } return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -1085,10 +1189,21 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d) return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } +static int rtl2831u_get_rc_config(struct dvb_usb_device *d, + struct dvb_usb_rc *rc) +{ + rc->map_name = RC_MAP_EMPTY; + rc->allowed_protos = RC_TYPE_NEC; + rc->query = rtl2831u_rc_query; + rc->interval = 400; + + return 0; +} + static int rtl2832u_rc_query(struct dvb_usb_device *d) { int ret, i; @@ -1146,281 +1261,108 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d) exit: return ret; err: - deb_info("%s: failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -enum rtl28xxu_usb_table_entry { - RTL2831U_0BDA_2831, - RTL2831U_14AA_0160, - RTL2831U_14AA_0161, - RTL2832U_0CCD_00A9, - RTL2832U_1F4D_B803, - RTL2832U_0CCD_00B3, -}; - -static struct usb_device_id rtl28xxu_table[] = { - /* RTL2831U */ - [RTL2831U_0BDA_2831] = { - USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U)}, - [RTL2831U_14AA_0160] = { - USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT)}, - [RTL2831U_14AA_0161] = { - USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2)}, - - /* RTL2832U */ - [RTL2832U_0CCD_00A9] = { - USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1)}, - [RTL2832U_1F4D_B803] = { - USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT)}, - [RTL2832U_0CCD_00B3] = { - USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK)}, - {} /* terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, rtl28xxu_table); - -static struct dvb_usb_device_properties rtl28xxu_properties[] = { - { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .no_reconnect = 1, - - .size_of_priv = sizeof(struct rtl28xxu_priv), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = { - { - .frontend_attach = rtl2831u_frontend_attach, - .tuner_attach = rtl2831u_tuner_attach, - .streaming_ctrl = rtl2831u_streaming_ctrl, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x81, - .u = { - .bulk = { - .buffersize = 8*512, - } - } - } - } - } - } - }, +static int rtl2832u_get_rc_config(struct dvb_usb_device *d, + struct dvb_usb_rc *rc) +{ + rc->map_name = RC_MAP_EMPTY; + rc->allowed_protos = RC_TYPE_NEC; + rc->query = rtl2832u_rc_query; + rc->interval = 400; - .power_ctrl = rtl2831u_power_ctrl, + return 0; +} - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "rtl28xxu", - .rc_query = rtl2831u_rc_query, - .rc_interval = 400, - .allowed_protos = RC_TYPE_NEC, - .rc_codes = RC_MAP_EMPTY, +static const struct dvb_usb_device_properties rtl2831u_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct rtl28xxu_priv), + + .power_ctrl = rtl2831u_power_ctrl, + .i2c_algo = &rtl28xxu_i2c_algo, + .read_config = rtl2831u_read_config, + .frontend_attach = rtl2831u_frontend_attach, + .tuner_attach = rtl2831u_tuner_attach, + .init = rtl28xxu_init, + .get_rc_config = rtl2831u_get_rc_config, + + .num_adapters = 1, + .adapter = { + { + .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512), }, - - .i2c_algo = &rtl28xxu_i2c_algo, - - .num_device_descs = 2, - .devices = { - { - .name = "Realtek RTL2831U reference design", - .warm_ids = { - &rtl28xxu_table[RTL2831U_0BDA_2831], - }, - }, - { - .name = "Freecom USB2.0 DVB-T", - .warm_ids = { - &rtl28xxu_table[RTL2831U_14AA_0160], - &rtl28xxu_table[RTL2831U_14AA_0161], - }, - }, - } }, - { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .no_reconnect = 1, - - .size_of_priv = sizeof(struct rtl28xxu_priv), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = { - { - .frontend_attach = rtl2832u_frontend_attach, - .tuner_attach = rtl2832u_tuner_attach, - .streaming_ctrl = rtl2832u_streaming_ctrl, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x81, - .u = { - .bulk = { - .buffersize = 8*512, - } - } - } - } - } - } - }, - - .power_ctrl = rtl2832u_power_ctrl, +}; - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "rtl28xxu", - .rc_query = rtl2832u_rc_query, - .rc_interval = 400, - .allowed_protos = RC_TYPE_NEC, - .rc_codes = RC_MAP_EMPTY, +static const struct dvb_usb_device_properties rtl2832u_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct rtl28xxu_priv), + + .power_ctrl = rtl2832u_power_ctrl, + .i2c_algo = &rtl28xxu_i2c_algo, + .read_config = rtl2832u_read_config, + .frontend_attach = rtl2832u_frontend_attach, + .tuner_attach = rtl2832u_tuner_attach, + .init = rtl28xxu_init, + .get_rc_config = rtl2832u_get_rc_config, + + .num_adapters = 1, + .adapter = { + { + .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512), }, - - .i2c_algo = &rtl28xxu_i2c_algo, - - .num_device_descs = 3, - .devices = { - { - .name = "Terratec Cinergy T Stick Black", - .warm_ids = { - &rtl28xxu_table[RTL2832U_0CCD_00A9], - }, - }, - { - .name = "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", - .warm_ids = { - &rtl28xxu_table[RTL2832U_1F4D_B803], - }, - }, - { - .name = "NOXON DAB/DAB+ USB dongle", - .warm_ids = { - &rtl28xxu_table[RTL2832U_0CCD_00B3], - }, - }, - } }, - }; -static int rtl28xxu_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int ret, i; - u8 val; - int properties_count = ARRAY_SIZE(rtl28xxu_properties); - struct dvb_usb_device *d; - struct usb_device *udev; - bool found; - - deb_info("%s: interface=%d\n", __func__, - intf->cur_altsetting->desc.bInterfaceNumber); - - if (intf->cur_altsetting->desc.bInterfaceNumber != 0) - return 0; - - /* Dynamic USB ID support. Replaces first device ID with current one .*/ - udev = interface_to_usbdev(intf); - - for (i = 0, found = false; i < ARRAY_SIZE(rtl28xxu_table) - 1; i++) { - if (rtl28xxu_table[i].idVendor == - le16_to_cpu(udev->descriptor.idVendor) && - rtl28xxu_table[i].idProduct == - le16_to_cpu(udev->descriptor.idProduct)) { - found = true; - break; - } - } - - if (!found) { - deb_info("%s: using dynamic ID %04x:%04x\n", __func__, - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct)); - rtl28xxu_properties[0].devices[0].warm_ids[0]->idVendor = - le16_to_cpu(udev->descriptor.idVendor); - rtl28xxu_properties[0].devices[0].warm_ids[0]->idProduct = - le16_to_cpu(udev->descriptor.idProduct); - } - - for (i = 0; i < properties_count; i++) { - ret = dvb_usb_device_init(intf, &rtl28xxu_properties[i], - THIS_MODULE, &d, adapter_nr); - if (ret == 0 || ret != -ENODEV) - break; - } - - if (ret) - goto err; - - - /* init USB endpoints */ - ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val); - if (ret) - goto err; - - /* enable DMA and Full Packet Mode*/ - val |= 0x09; - ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val); - if (ret) - goto err; - - /* set EPA maximum packet size to 0x0200 */ - ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); - if (ret) - goto err; - - /* change EPA FIFO length */ - ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); - if (ret) - goto err; - - return ret; -err: - deb_info("%s: failed=%d\n", __func__, ret); - return ret; -} - -static struct usb_driver rtl28xxu_driver = { - .name = "dvb_usb_rtl28xxu", - .probe = rtl28xxu_probe, - .disconnect = dvb_usb_device_exit, - .id_table = rtl28xxu_table, +static const struct usb_device_id rtl28xxu_id_table[] = { + { DVB_USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U, + &rtl2831u_props, "Realtek RTL2831U reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT, + &rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) }, + { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2, + &rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) }, + + { DVB_USB_DEVICE(USB_VID_REALTEK, 0x2832, + &rtl2832u_props, "Realtek RTL2832U reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_REALTEK, 0x2838, + &rtl2832u_props, "Realtek RTL2832U reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1, + &rtl2832u_props, "Terratec Cinergy T Stick Black", NULL) }, + { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT, + &rtl2832u_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK, + &rtl2832u_props, "NOXON DAB/DAB+ USB dongle", NULL) }, + { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TREKSTOR_TERRES_2_0, + &rtl2832u_props, "Trekstor DVB-T Stick Terres 2.0", NULL) }, + { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1101, + &rtl2832u_props, "Dexatek DK DVB-T Dongle", NULL) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6680, + &rtl2832u_props, "DigitalNow Quad DVB-T Receiver", NULL) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d3, + &rtl2832u_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) }, + { } +}; +MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table); + +static struct usb_driver rtl28xxu_usb_driver = { + .name = KBUILD_MODNAME, + .id_table = rtl28xxu_id_table, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .reset_resume = dvb_usbv2_reset_resume, + .no_dynamic_id = 1, + .soft_unbind = 1, }; -/* module stuff */ -static int __init rtl28xxu_module_init(void) -{ - int ret; - - deb_info("%s:\n", __func__); - - ret = usb_register(&rtl28xxu_driver); - if (ret) - err("usb_register failed=%d", ret); - - return ret; -} - -static void __exit rtl28xxu_module_exit(void) -{ - deb_info("%s:\n", __func__); - - /* deregister this driver from the USB subsystem */ - usb_deregister(&rtl28xxu_driver); -} - -module_init(rtl28xxu_module_init); -module_exit(rtl28xxu_module_exit); +module_usb_driver(rtl28xxu_usb_driver); MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver"); MODULE_AUTHOR("Antti Palosaari "); diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.h b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h similarity index 91% rename from drivers/media/dvb/dvb-usb/rtl28xxu.h rename to drivers/media/usb/dvb-usb-v2/rtl28xxu.h index 90f3bb4f4c0ec2c6fdaf8e8763e0d6e4d3819eb2..2f3af2d3b6ce5ec365aab25093ea9b3c1994dcef 100644 --- a/drivers/media/dvb/dvb-usb/rtl28xxu.h +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h @@ -22,28 +22,7 @@ #ifndef RTL28XXU_H #define RTL28XXU_H -#define DVB_USB_LOG_PREFIX "rtl28xxu" -#include "dvb-usb.h" - -#define deb_info(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x01, args) -#define deb_rc(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x02, args) -#define deb_xfer(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x04, args) -#define deb_reg(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x08, args) -#define deb_i2c(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x10, args) -#define deb_fw(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x20, args) - -#define deb_dump(r, t, v, i, b, l, func) { \ - int loop_; \ - func("%02x %02x %02x %02x %02x %02x %02x %02x", \ - t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \ - if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ - func(" >>> "); \ - else \ - func(" <<< "); \ - for (loop_ = 0; loop_ < l; loop_++) \ - func("%02x ", b[loop_]); \ - func("\n");\ -} +#include "dvb_usb.h" /* * USB commands @@ -74,6 +53,7 @@ struct rtl28xxu_priv { u8 chip_id; u8 tuner; + char *tuner_name; u8 page; /* integrated demod active register page */ bool rc_active; }; @@ -84,14 +64,15 @@ enum rtl28xxu_chip_id { CHIP_ID_RTL2832U, }; +/* XXX: Hack. This must be keep sync with rtl2832 demod driver. */ enum rtl28xxu_tuner { TUNER_NONE, - TUNER_RTL2830_QT1010, + TUNER_RTL2830_QT1010 = 0x10, TUNER_RTL2830_MT2060, TUNER_RTL2830_MXL5005S, - TUNER_RTL2832_MT2266, + TUNER_RTL2832_MT2266 = 0x20, TUNER_RTL2832_FC2580, TUNER_RTL2832_MT2063, TUNER_RTL2832_MAX3543, diff --git a/drivers/media/usb/dvb-usb-v2/usb_urb.c b/drivers/media/usb/dvb-usb-v2/usb_urb.c new file mode 100644 index 0000000000000000000000000000000000000000..5989b65903779b08bb70c54251bf186ed47846c4 --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/usb_urb.c @@ -0,0 +1,358 @@ +/* usb-urb.c is part of the DVB USB library. + * + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file keeps functions for initializing and handling the + * BULK and ISOC USB data transfers in a generic way. + * Can be used for DVB-only and also, that's the plan, for + * Hybrid USB devices (analog and DVB). + */ +#include "dvb_usb_common.h" + +/* URB stuff for streaming */ + +int usb_urb_reconfig(struct usb_data_stream *stream, + struct usb_data_stream_properties *props); + +static void usb_urb_complete(struct urb *urb) +{ + struct usb_data_stream *stream = urb->context; + int ptype = usb_pipetype(urb->pipe); + int i; + u8 *b; + + dev_dbg_ratelimited(&stream->udev->dev, "%s: %s urb completed " \ + "status=%d length=%d/%d pack_num=%d errors=%d\n", + __func__, ptype == PIPE_ISOCHRONOUS ? "isoc" : "bulk", + urb->status, urb->actual_length, + urb->transfer_buffer_length, + urb->number_of_packets, urb->error_count); + + switch (urb->status) { + case 0: /* success */ + case -ETIMEDOUT: /* NAK */ + break; + case -ECONNRESET: /* kill */ + case -ENOENT: + case -ESHUTDOWN: + return; + default: /* error */ + dev_dbg_ratelimited(&stream->udev->dev, + "%s: urb completition failed=%d\n", + __func__, urb->status); + break; + } + + b = (u8 *) urb->transfer_buffer; + switch (ptype) { + case PIPE_ISOCHRONOUS: + for (i = 0; i < urb->number_of_packets; i++) { + if (urb->iso_frame_desc[i].status != 0) + dev_dbg(&stream->udev->dev, "%s: iso frame " \ + "descriptor has an error=%d\n", + __func__, + urb->iso_frame_desc[i].status); + else if (urb->iso_frame_desc[i].actual_length > 0) + stream->complete(stream, + b + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].actual_length); + + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + break; + case PIPE_BULK: + if (urb->actual_length > 0) + stream->complete(stream, b, urb->actual_length); + break; + default: + dev_err(&stream->udev->dev, "%s: unknown endpoint type in " \ + "completition handler\n", KBUILD_MODNAME); + return; + } + usb_submit_urb(urb, GFP_ATOMIC); +} + +int usb_urb_killv2(struct usb_data_stream *stream) +{ + int i; + for (i = 0; i < stream->urbs_submitted; i++) { + dev_dbg(&stream->udev->dev, "%s: kill urb=%d\n", __func__, i); + /* stop the URB */ + usb_kill_urb(stream->urb_list[i]); + } + stream->urbs_submitted = 0; + return 0; +} + +int usb_urb_submitv2(struct usb_data_stream *stream, + struct usb_data_stream_properties *props) +{ + int i, ret; + + if (props) { + ret = usb_urb_reconfig(stream, props); + if (ret < 0) + return ret; + } + + for (i = 0; i < stream->urbs_initialized; i++) { + dev_dbg(&stream->udev->dev, "%s: submit urb=%d\n", __func__, i); + ret = usb_submit_urb(stream->urb_list[i], GFP_ATOMIC); + if (ret) { + dev_err(&stream->udev->dev, "%s: could not submit " \ + "urb no. %d - get them all back\n", + KBUILD_MODNAME, i); + usb_urb_killv2(stream); + return ret; + } + stream->urbs_submitted++; + } + return 0; +} + +int usb_urb_free_urbs(struct usb_data_stream *stream) +{ + int i; + + usb_urb_killv2(stream); + + for (i = stream->urbs_initialized - 1; i >= 0; i--) { + if (stream->urb_list[i]) { + dev_dbg(&stream->udev->dev, "%s: free urb=%d\n", + __func__, i); + /* free the URBs */ + usb_free_urb(stream->urb_list[i]); + } + } + stream->urbs_initialized = 0; + + return 0; +} + +static int usb_urb_alloc_bulk_urbs(struct usb_data_stream *stream) +{ + int i, j; + + /* allocate the URBs */ + for (i = 0; i < stream->props.count; i++) { + dev_dbg(&stream->udev->dev, "%s: alloc urb=%d\n", __func__, i); + stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC); + if (!stream->urb_list[i]) { + dev_dbg(&stream->udev->dev, "%s: failed\n", __func__); + for (j = 0; j < i; j++) + usb_free_urb(stream->urb_list[j]); + return -ENOMEM; + } + usb_fill_bulk_urb(stream->urb_list[i], + stream->udev, + usb_rcvbulkpipe(stream->udev, + stream->props.endpoint), + stream->buf_list[i], + stream->props.u.bulk.buffersize, + usb_urb_complete, stream); + + stream->urb_list[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP; + stream->urb_list[i]->transfer_dma = stream->dma_addr[i]; + stream->urbs_initialized++; + } + return 0; +} + +static int usb_urb_alloc_isoc_urbs(struct usb_data_stream *stream) +{ + int i, j; + + /* allocate the URBs */ + for (i = 0; i < stream->props.count; i++) { + struct urb *urb; + int frame_offset = 0; + dev_dbg(&stream->udev->dev, "%s: alloc urb=%d\n", __func__, i); + stream->urb_list[i] = usb_alloc_urb( + stream->props.u.isoc.framesperurb, GFP_ATOMIC); + if (!stream->urb_list[i]) { + dev_dbg(&stream->udev->dev, "%s: failed\n", __func__); + for (j = 0; j < i; j++) + usb_free_urb(stream->urb_list[j]); + return -ENOMEM; + } + + urb = stream->urb_list[i]; + + urb->dev = stream->udev; + urb->context = stream; + urb->complete = usb_urb_complete; + urb->pipe = usb_rcvisocpipe(stream->udev, + stream->props.endpoint); + urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; + urb->interval = stream->props.u.isoc.interval; + urb->number_of_packets = stream->props.u.isoc.framesperurb; + urb->transfer_buffer_length = stream->props.u.isoc.framesize * + stream->props.u.isoc.framesperurb; + urb->transfer_buffer = stream->buf_list[i]; + urb->transfer_dma = stream->dma_addr[i]; + + for (j = 0; j < stream->props.u.isoc.framesperurb; j++) { + urb->iso_frame_desc[j].offset = frame_offset; + urb->iso_frame_desc[j].length = + stream->props.u.isoc.framesize; + frame_offset += stream->props.u.isoc.framesize; + } + + stream->urbs_initialized++; + } + return 0; +} + +int usb_free_stream_buffers(struct usb_data_stream *stream) +{ + if (stream->state & USB_STATE_URB_BUF) { + while (stream->buf_num) { + stream->buf_num--; + dev_dbg(&stream->udev->dev, "%s: free buf=%d\n", + __func__, stream->buf_num); + usb_free_coherent(stream->udev, stream->buf_size, + stream->buf_list[stream->buf_num], + stream->dma_addr[stream->buf_num]); + } + } + + stream->state &= ~USB_STATE_URB_BUF; + + return 0; +} + +int usb_alloc_stream_buffers(struct usb_data_stream *stream, int num, + unsigned long size) +{ + stream->buf_num = 0; + stream->buf_size = size; + + dev_dbg(&stream->udev->dev, "%s: all in all I will use %lu bytes for " \ + "streaming\n", __func__, num * size); + + for (stream->buf_num = 0; stream->buf_num < num; stream->buf_num++) { + stream->buf_list[stream->buf_num] = usb_alloc_coherent( + stream->udev, size, GFP_ATOMIC, + &stream->dma_addr[stream->buf_num]); + if (!stream->buf_list[stream->buf_num]) { + dev_dbg(&stream->udev->dev, "%s: alloc buf=%d failed\n", + __func__, stream->buf_num); + usb_free_stream_buffers(stream); + return -ENOMEM; + } + + dev_dbg(&stream->udev->dev, "%s: alloc buf=%d %p (dma %llu)\n", + __func__, stream->buf_num, + stream->buf_list[stream->buf_num], + (long long)stream->dma_addr[stream->buf_num]); + memset(stream->buf_list[stream->buf_num], 0, size); + stream->state |= USB_STATE_URB_BUF; + } + + return 0; +} + +int usb_urb_reconfig(struct usb_data_stream *stream, + struct usb_data_stream_properties *props) +{ + int buf_size; + + if (!props) + return 0; + + /* check allocated buffers are large enough for the request */ + if (props->type == USB_BULK) { + buf_size = stream->props.u.bulk.buffersize; + } else if (props->type == USB_ISOC) { + buf_size = props->u.isoc.framesize * props->u.isoc.framesperurb; + } else { + dev_err(&stream->udev->dev, "%s: invalid endpoint type=%d\n", + KBUILD_MODNAME, props->type); + return -EINVAL; + } + + if (stream->buf_num < props->count || stream->buf_size < buf_size) { + dev_err(&stream->udev->dev, "%s: cannot reconfigure as " \ + "allocated buffers are too small\n", + KBUILD_MODNAME); + return -EINVAL; + } + + /* check if all fields are same */ + if (stream->props.type == props->type && + stream->props.count == props->count && + stream->props.endpoint == props->endpoint) { + if (props->type == USB_BULK && + props->u.bulk.buffersize == + stream->props.u.bulk.buffersize) + return 0; + else if (props->type == USB_ISOC && + props->u.isoc.framesperurb == + stream->props.u.isoc.framesperurb && + props->u.isoc.framesize == + stream->props.u.isoc.framesize && + props->u.isoc.interval == + stream->props.u.isoc.interval) + return 0; + } + + dev_dbg(&stream->udev->dev, "%s: re-alloc urbs\n", __func__); + + usb_urb_free_urbs(stream); + memcpy(&stream->props, props, sizeof(*props)); + if (props->type == USB_BULK) + return usb_urb_alloc_bulk_urbs(stream); + else if (props->type == USB_ISOC) + return usb_urb_alloc_isoc_urbs(stream); + + return 0; +} + +int usb_urb_initv2(struct usb_data_stream *stream, + const struct usb_data_stream_properties *props) +{ + int ret; + + if (!stream || !props) + return -EINVAL; + + memcpy(&stream->props, props, sizeof(*props)); + + if (!stream->complete) { + dev_err(&stream->udev->dev, "%s: there is no data callback - " \ + "this doesn't make sense\n", KBUILD_MODNAME); + return -EINVAL; + } + + switch (stream->props.type) { + case USB_BULK: + ret = usb_alloc_stream_buffers(stream, stream->props.count, + stream->props.u.bulk.buffersize); + if (ret < 0) + return ret; + + return usb_urb_alloc_bulk_urbs(stream); + case USB_ISOC: + ret = usb_alloc_stream_buffers(stream, stream->props.count, + stream->props.u.isoc.framesize * + stream->props.u.isoc.framesperurb); + if (ret < 0) + return ret; + + return usb_urb_alloc_isoc_urbs(stream); + default: + dev_err(&stream->udev->dev, "%s: unknown urb-type for data " \ + "transfer\n", KBUILD_MODNAME); + return -EINVAL; + } +} + +int usb_urb_exitv2(struct usb_data_stream *stream) +{ + usb_urb_free_urbs(stream); + usb_free_stream_buffers(stream); + + return 0; +} diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..fa0b2931d30538c5cc2cac6d06f659d83682a61d --- /dev/null +++ b/drivers/media/usb/dvb-usb/Kconfig @@ -0,0 +1,313 @@ +config DVB_USB + tristate "Support for various USB DVB devices" + depends on DVB_CORE && USB && I2C && RC_CORE + help + By enabling this you will be able to choose the various supported + USB1.1 and USB2.0 DVB devices. + + Almost every USB device needs a firmware, please look into + . + + For a complete list of supported USB devices see the LinuxTV DVB Wiki: + + + Say Y if you own a USB DVB device. + +config DVB_USB_DEBUG + bool "Enable extended debug support for all DVB-USB devices" + depends on DVB_USB + help + Say Y if you want to enable debugging. See modinfo dvb-usb (and the + appropriate drivers) for debug levels. + +config DVB_USB_A800 + tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" + depends on DVB_USB + select DVB_DIB3000MC + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. + +config DVB_USB_DIBUSB_MB + tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB3000MB + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + help + Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by + DiBcom () equipped with a DiB3000M-B demodulator. + + For an up-to-date list of devices supported by this driver, have a look + on the Linux-DVB Wiki at www.linuxtv.org. + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_DIBUSB_MB_FAULTY + bool "Support faulty USB IDs" + depends on DVB_USB_DIBUSB_MB + help + Support for faulty USB IDs due to an invalid EEPROM on some Artec devices. + +config DVB_USB_DIBUSB_MC + tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" + depends on DVB_USB + select DVB_DIB3000MC + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + help + Support for USB2.0 DVB-T receivers based on reference designs made by + DiBcom () equipped with a DiB3000M-C/P demodulator. + + For an up-to-date list of devices supported by this driver, have a look + on the Linux-DVB Wiki at www.linuxtv.org. + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_DIB0700 + tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)" + depends on DVB_USB + select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB7000M if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB8000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB3000MC if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_DIB0090 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2266 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT + help + Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The + USB bridge is also present in devices having the DiB7700 DVB-T-USB + silicon. This chip can be found in devices offered by Hauppauge, + Avermedia and other big and small companies. + + For an up-to-date list of devices supported by this driver, have a look + on the LinuxTV Wiki at www.linuxtv.org. + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_UMT_010 + tristate "HanfTek UMT-010 DVB-T USB2.0 support" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB3000MC + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. + +config DVB_USB_CXUSB + tristate "Conexant USB2.0 hybrid reference design support" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX22702 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ATBM8830 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGS8GXX if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MAX2165 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Conexant USB2.0 hybrid reference design. + Currently, only DVB and ATSC modes are supported, analog mode + shall be added in the future. Devices that require this module: + + Medion MD95700 hybrid USB2.0 device. + DViCO FusionHDTV (Bluebird) USB2.0 devices + +config DVB_USB_M920X + tristate "Uli m920x DVB-T USB2.0 support" + depends on DVB_USB + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. + Currently, only devices with a product id of + "DTV USB MINI" (in cold state) are supported. + Firmware required. + +config DVB_USB_DIGITV + tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_NXT6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver. + +config DVB_USB_VP7045 + tristate "TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0 support" + depends on DVB_USB + help + Say Y here to support the + + TwinhanDTV Alpha (stick) (VP-7045), + TwinhanDTV MagicBox II (VP-7046), + DigitalNow TinyUSB 2 DVB-t, + DigitalRise USB 2.0 Ter (Beetle) and + TYPHOON DVB-T USB DRIVE + + DVB-T USB2.0 receivers. + +config DVB_USB_VP702X + tristate "TwinhanDTV StarBox and clones DVB-S USB2.0 support" + depends on DVB_USB + help + Say Y here to support the + + TwinhanDTV StarBox, + DigitalRise USB Starbox and + TYPHOON DVB-S USB 2.0 BOX + + DVB-S USB2.0 receivers. + +config DVB_USB_GP8PSK + tristate "GENPIX 8PSK->USB module support" + depends on DVB_USB + help + Say Y here to support the + GENPIX 8psk module + + DVB-S USB2.0 receivers. + +config DVB_USB_NOVA_T_USB2 + tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" + depends on DVB_USB + select DVB_DIB3000MC + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. + +config DVB_USB_TTUSB2 + tristate "Pinnacle 400e DVB-S USB2.0 support" + depends on DVB_USB + select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The + firmware protocol used by this module is similar to the one used by the + old ttusb-driver - that's why the module is called dvb-usb-ttusb2. + +config DVB_USB_DTT200U + tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" + depends on DVB_USB + help + Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. + + The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan). + + The WT-220U and its clones are pen-sized. + +config DVB_USB_OPERA1 + tristate "Opera1 DVB-S USB2.0 receiver" + depends on DVB_USB + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Opera DVB-S USB2.0 receiver. + +config DVB_USB_AF9005 + tristate "Afatech AF9005 DVB-T USB1.1 support" + depends on DVB_USB + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver + and the TerraTec Cinergy T USB XE (Rev.1) + +config DVB_USB_AF9005_REMOTE + tristate "Afatech AF9005 default remote control support" + depends on DVB_USB_AF9005 + help + Say Y here to support the default remote control decoding for the + Afatech AF9005 based receiver. + +config DVB_USB_PCTV452E + tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600" + depends on DVB_USB + select TTPCI_EEPROM + select DVB_LNBP22 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + help + Support for external USB adapter designed by Pinnacle, + shipped under the brand name 'PCTV HDTV Pro USB'. + Also supports TT Connect S2-3600/3650 cards. + Say Y if you own such a device and want to use it. + +config DVB_USB_DW2102 + tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT + select DVB_SI21XX if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT312 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10039 if MEDIA_SUBDRV_AUTOSELECT + select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the DvbWorld, TeVii, Prof DVB-S/S2 USB2.0 + receivers. + +config DVB_USB_CINERGY_T2 + tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver" + depends on DVB_USB + help + Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers + + Say Y if you own such a device and want to use it. + +config DVB_USB_DTV5100 + tristate "AME DTV-5100 USB2.0 DVB-T support" + depends on DVB_USB + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. + +config DVB_USB_FRIIO + tristate "Friio ISDB-T USB2.0 Receiver support" + depends on DVB_USB + help + Say Y here to support the Japanese DTV receiver Friio. + +config DVB_USB_AZ6027 + tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support" + depends on DVB_USB + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the AZ6027 device + +config DVB_USB_TECHNISAT_USB2 + tristate "Technisat DVB-S/S2 USB2.0 support" + depends on DVB_USB + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Technisat USB2 DVB-S/S2 device diff --git a/drivers/media/usb/dvb-usb/Makefile b/drivers/media/usb/dvb-usb/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..acdd1efd4e74b22af1c8459ca3043deb9c3a8086 --- /dev/null +++ b/drivers/media/usb/dvb-usb/Makefile @@ -0,0 +1,83 @@ +dvb-usb-objs += dvb-usb-firmware.o dvb-usb-init.o dvb-usb-urb.o dvb-usb-i2c.o +dvb-usb-objs += dvb-usb-dvb.o dvb-usb-remote.o usb-urb.o +obj-$(CONFIG_DVB_USB) += dvb-usb.o + +dvb-usb-vp7045-objs := vp7045.o vp7045-fe.o +obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o + +dvb-usb-vp702x-objs := vp702x.o vp702x-fe.o +obj-$(CONFIG_DVB_USB_VP702X) += dvb-usb-vp702x.o + +dvb-usb-gp8psk-objs := gp8psk.o gp8psk-fe.o +obj-$(CONFIG_DVB_USB_GP8PSK) += dvb-usb-gp8psk.o + +dvb-usb-dtt200u-objs := dtt200u.o dtt200u-fe.o +obj-$(CONFIG_DVB_USB_DTT200U) += dvb-usb-dtt200u.o + +dvb-usb-dibusb-common-objs := dibusb-common.o + +dvb-usb-a800-objs := a800.o +obj-$(CONFIG_DVB_USB_A800) += dvb-usb-dibusb-common.o dvb-usb-a800.o + +dvb-usb-dibusb-mb-objs := dibusb-mb.o +obj-$(CONFIG_DVB_USB_DIBUSB_MB) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mb.o + +dvb-usb-dibusb-mc-objs := dibusb-mc.o +obj-$(CONFIG_DVB_USB_DIBUSB_MC) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mc.o + +dvb-usb-nova-t-usb2-objs := nova-t-usb2.o +obj-$(CONFIG_DVB_USB_NOVA_T_USB2) += dvb-usb-dibusb-common.o dvb-usb-nova-t-usb2.o + +dvb-usb-umt-010-objs := umt-010.o +obj-$(CONFIG_DVB_USB_UMT_010) += dvb-usb-dibusb-common.o dvb-usb-umt-010.o + +dvb-usb-m920x-objs := m920x.o +obj-$(CONFIG_DVB_USB_M920X) += dvb-usb-m920x.o + +dvb-usb-digitv-objs := digitv.o +obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o + +dvb-usb-cxusb-objs := cxusb.o +obj-$(CONFIG_DVB_USB_CXUSB) += dvb-usb-cxusb.o + +dvb-usb-ttusb2-objs := ttusb2.o +obj-$(CONFIG_DVB_USB_TTUSB2) += dvb-usb-ttusb2.o + +dvb-usb-dib0700-objs := dib0700_core.o dib0700_devices.o +obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o + +dvb-usb-opera-objs := opera1.o +obj-$(CONFIG_DVB_USB_OPERA1) += dvb-usb-opera.o + +dvb-usb-af9005-objs := af9005.o af9005-fe.o +obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o + +dvb-usb-af9005-remote-objs := af9005-remote.o +obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o + +dvb-usb-pctv452e-objs := pctv452e.o +obj-$(CONFIG_DVB_USB_PCTV452E) += dvb-usb-pctv452e.o + +dvb-usb-dw2102-objs := dw2102.o +obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o + +dvb-usb-dtv5100-objs := dtv5100.o +obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o + +dvb-usb-cinergyT2-objs := cinergyT2-core.o cinergyT2-fe.o +obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o + +dvb-usb-friio-objs := friio.o friio-fe.o +obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o + +dvb-usb-az6027-objs := az6027.o +obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o + +dvb-usb-technisat-usb2-objs := technisat-usb2.o +obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o + +ccflags-y += -I$(srctree)/drivers/media/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb-frontends/ +# due to tuner-xc3028 +ccflags-y += -I$(srctree)/drivers/media/tuners +ccflags-y += -I$(srctree)/drivers/media/pci/ttpci diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/usb/dvb-usb/a800.c similarity index 100% rename from drivers/media/dvb/dvb-usb/a800.c rename to drivers/media/usb/dvb-usb/a800.c diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/usb/dvb-usb/af9005-fe.c similarity index 100% rename from drivers/media/dvb/dvb-usb/af9005-fe.c rename to drivers/media/usb/dvb-usb/af9005-fe.c diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/usb/dvb-usb/af9005-remote.c similarity index 100% rename from drivers/media/dvb/dvb-usb/af9005-remote.c rename to drivers/media/usb/dvb-usb/af9005-remote.c diff --git a/drivers/media/dvb/dvb-usb/af9005-script.h b/drivers/media/usb/dvb-usb/af9005-script.h similarity index 100% rename from drivers/media/dvb/dvb-usb/af9005-script.h rename to drivers/media/usb/dvb-usb/af9005-script.h diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c similarity index 100% rename from drivers/media/dvb/dvb-usb/af9005.c rename to drivers/media/usb/dvb-usb/af9005.c diff --git a/drivers/media/dvb/dvb-usb/af9005.h b/drivers/media/usb/dvb-usb/af9005.h similarity index 100% rename from drivers/media/dvb/dvb-usb/af9005.h rename to drivers/media/usb/dvb-usb/af9005.h diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c similarity index 100% rename from drivers/media/dvb/dvb-usb/az6027.c rename to drivers/media/usb/dvb-usb/az6027.c diff --git a/drivers/media/dvb/dvb-usb/az6027.h b/drivers/media/usb/dvb-usb/az6027.h similarity index 100% rename from drivers/media/dvb/dvb-usb/az6027.h rename to drivers/media/usb/dvb-usb/az6027.h diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c similarity index 100% rename from drivers/media/dvb/dvb-usb/cinergyT2-core.c rename to drivers/media/usb/dvb-usb/cinergyT2-core.c diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c similarity index 100% rename from drivers/media/dvb/dvb-usb/cinergyT2-fe.c rename to drivers/media/usb/dvb-usb/cinergyT2-fe.c diff --git a/drivers/media/dvb/dvb-usb/cinergyT2.h b/drivers/media/usb/dvb-usb/cinergyT2.h similarity index 100% rename from drivers/media/dvb/dvb-usb/cinergyT2.h rename to drivers/media/usb/dvb-usb/cinergyT2.h diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c similarity index 100% rename from drivers/media/dvb/dvb-usb/cxusb.c rename to drivers/media/usb/dvb-usb/cxusb.c diff --git a/drivers/media/dvb/dvb-usb/cxusb.h b/drivers/media/usb/dvb-usb/cxusb.h similarity index 100% rename from drivers/media/dvb/dvb-usb/cxusb.h rename to drivers/media/usb/dvb-usb/cxusb.h diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/usb/dvb-usb/dib0700.h similarity index 100% rename from drivers/media/dvb/dvb-usb/dib0700.h rename to drivers/media/usb/dvb-usb/dib0700.h diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c similarity index 99% rename from drivers/media/dvb/dvb-usb/dib0700_core.c rename to drivers/media/usb/dvb-usb/dib0700_core.c index 7e9e00fae04e140aa4dafddb6e322386442980de..ef87229de6af5d791060b00cd82188bcebbc8c20 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -768,13 +768,13 @@ int dib0700_rc_setup(struct dvb_usb_device *d) /* Starting in firmware 1.20, the RC info is provided on a bulk pipe */ purb = usb_alloc_urb(0, GFP_KERNEL); if (purb == NULL) { - err("rc usb alloc urb failed\n"); + err("rc usb alloc urb failed"); return -ENOMEM; } purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL); if (purb->transfer_buffer == NULL) { - err("rc kzalloc failed\n"); + err("rc kzalloc failed"); usb_free_urb(purb); return -ENOMEM; } @@ -786,7 +786,7 @@ int dib0700_rc_setup(struct dvb_usb_device *d) ret = usb_submit_urb(purb, GFP_ATOMIC); if (ret) { - err("rc submit urb failed\n"); + err("rc submit urb failed"); kfree(purb->transfer_buffer); usb_free_urb(purb); } diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dib0700_devices.c rename to drivers/media/usb/dvb-usb/dib0700_devices.c diff --git a/drivers/media/dvb/dvb-usb/dib07x0.h b/drivers/media/usb/dvb-usb/dib07x0.h similarity index 100% rename from drivers/media/dvb/dvb-usb/dib07x0.h rename to drivers/media/usb/dvb-usb/dib07x0.h diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dibusb-common.c rename to drivers/media/usb/dvb-usb/dibusb-common.c diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dibusb-mb.c rename to drivers/media/usb/dvb-usb/dibusb-mb.c diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/usb/dvb-usb/dibusb-mc.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dibusb-mc.c rename to drivers/media/usb/dvb-usb/dibusb-mc.c diff --git a/drivers/media/dvb/dvb-usb/dibusb.h b/drivers/media/usb/dvb-usb/dibusb.h similarity index 100% rename from drivers/media/dvb/dvb-usb/dibusb.h rename to drivers/media/usb/dvb-usb/dibusb.h diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c similarity index 100% rename from drivers/media/dvb/dvb-usb/digitv.c rename to drivers/media/usb/dvb-usb/digitv.c diff --git a/drivers/media/dvb/dvb-usb/digitv.h b/drivers/media/usb/dvb-usb/digitv.h similarity index 100% rename from drivers/media/dvb/dvb-usb/digitv.h rename to drivers/media/usb/dvb-usb/digitv.h diff --git a/drivers/media/dvb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dtt200u-fe.c rename to drivers/media/usb/dvb-usb/dtt200u-fe.c diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dtt200u.c rename to drivers/media/usb/dvb-usb/dtt200u.c diff --git a/drivers/media/dvb/dvb-usb/dtt200u.h b/drivers/media/usb/dvb-usb/dtt200u.h similarity index 100% rename from drivers/media/dvb/dvb-usb/dtt200u.h rename to drivers/media/usb/dvb-usb/dtt200u.h diff --git a/drivers/media/dvb/dvb-usb/dtv5100.c b/drivers/media/usb/dvb-usb/dtv5100.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dtv5100.c rename to drivers/media/usb/dvb-usb/dtv5100.c diff --git a/drivers/media/dvb/dvb-usb/dtv5100.h b/drivers/media/usb/dvb-usb/dtv5100.h similarity index 100% rename from drivers/media/dvb/dvb-usb/dtv5100.h rename to drivers/media/usb/dvb-usb/dtv5100.h diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-common.h b/drivers/media/usb/dvb-usb/dvb-usb-common.h similarity index 100% rename from drivers/media/dvb/dvb-usb/dvb-usb-common.h rename to drivers/media/usb/dvb-usb/dvb-usb-common.h diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/drivers/media/usb/dvb-usb/dvb-usb-dvb.c similarity index 99% rename from drivers/media/dvb/dvb-usb/dvb-usb-dvb.c rename to drivers/media/usb/dvb-usb/dvb-usb-dvb.c index ddf282f355b3c78f9f71608f4f445f196d68d3fc..719413b15f208b7ceb165422ff4d1111dfcfd6e1 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-dvb.c @@ -106,7 +106,6 @@ int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, short *adapter_nums) goto err; } adap->dvb_adap.priv = adap; - adap->dvb_adap.fe_ioctl_override = adap->props.fe_ioctl_override; if (adap->dev->props.read_mac_address) { if (adap->dev->props.read_mac_address(adap->dev,adap->dvb_adap.proposed_mac) == 0) diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dvb-usb-firmware.c rename to drivers/media/usb/dvb-usb/dvb-usb-firmware.c diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/drivers/media/usb/dvb-usb/dvb-usb-i2c.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dvb-usb-i2c.c rename to drivers/media/usb/dvb-usb/dvb-usb-i2c.c diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dvb-usb-init.c rename to drivers/media/usb/dvb-usb/dvb-usb-init.c diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/usb/dvb-usb/dvb-usb-remote.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dvb-usb-remote.c rename to drivers/media/usb/dvb-usb/dvb-usb-remote.c diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/usb/dvb-usb/dvb-usb-urb.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dvb-usb-urb.c rename to drivers/media/usb/dvb-usb/dvb-usb-urb.c diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h similarity index 99% rename from drivers/media/dvb/dvb-usb/dvb-usb.h rename to drivers/media/usb/dvb-usb/dvb-usb.h index 99f94409efa1768ebf1d20590dcaf633fda1a414..aab0f99bc892bc764530e9966b87561eede5974f 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb.h +++ b/drivers/media/usb/dvb-usb/dvb-usb.h @@ -162,8 +162,6 @@ struct dvb_usb_adapter_properties { int size_of_priv; int (*frontend_ctrl) (struct dvb_frontend *, int); - int (*fe_ioctl_override) (struct dvb_frontend *, - unsigned int, void *, unsigned int); int num_frontends; struct dvb_usb_adapter_fe_properties fe[MAX_NO_OF_FE_PER_ADAP]; diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c similarity index 100% rename from drivers/media/dvb/dvb-usb/dw2102.c rename to drivers/media/usb/dvb-usb/dw2102.c diff --git a/drivers/media/dvb/dvb-usb/dw2102.h b/drivers/media/usb/dvb-usb/dw2102.h similarity index 100% rename from drivers/media/dvb/dvb-usb/dw2102.h rename to drivers/media/usb/dvb-usb/dw2102.h diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c similarity index 100% rename from drivers/media/dvb/dvb-usb/friio-fe.c rename to drivers/media/usb/dvb-usb/friio-fe.c diff --git a/drivers/media/dvb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c similarity index 100% rename from drivers/media/dvb/dvb-usb/friio.c rename to drivers/media/usb/dvb-usb/friio.c diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h similarity index 100% rename from drivers/media/dvb/dvb-usb/friio.h rename to drivers/media/usb/dvb-usb/friio.h diff --git a/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/drivers/media/usb/dvb-usb/gp8psk-fe.c similarity index 100% rename from drivers/media/dvb/dvb-usb/gp8psk-fe.c rename to drivers/media/usb/dvb-usb/gp8psk-fe.c diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c similarity index 100% rename from drivers/media/dvb/dvb-usb/gp8psk.c rename to drivers/media/usb/dvb-usb/gp8psk.c diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/usb/dvb-usb/gp8psk.h similarity index 100% rename from drivers/media/dvb/dvb-usb/gp8psk.h rename to drivers/media/usb/dvb-usb/gp8psk.h diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/usb/dvb-usb/m920x.c similarity index 100% rename from drivers/media/dvb/dvb-usb/m920x.c rename to drivers/media/usb/dvb-usb/m920x.c diff --git a/drivers/media/dvb/dvb-usb/m920x.h b/drivers/media/usb/dvb-usb/m920x.h similarity index 100% rename from drivers/media/dvb/dvb-usb/m920x.h rename to drivers/media/usb/dvb-usb/m920x.h diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c similarity index 100% rename from drivers/media/dvb/dvb-usb/nova-t-usb2.c rename to drivers/media/usb/dvb-usb/nova-t-usb2.c diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/usb/dvb-usb/opera1.c similarity index 100% rename from drivers/media/dvb/dvb-usb/opera1.c rename to drivers/media/usb/dvb-usb/opera1.c diff --git a/drivers/media/dvb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c similarity index 99% rename from drivers/media/dvb/dvb-usb/pctv452e.c rename to drivers/media/usb/dvb-usb/pctv452e.c index f526eb05cc7a1f4db4327dfe286ecc2174d62ca4..02e878577c3dcb33f2cb18f0cfe9b6361a73b452 100644 --- a/drivers/media/dvb/dvb-usb/pctv452e.c +++ b/drivers/media/usb/dvb-usb/pctv452e.c @@ -136,8 +136,8 @@ static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, return 0; failed: - err("CI error %d; %02X %02X %02X -> %02X %02X %02X.", - ret, SYNC_BYTE_OUT, id, cmd, buf[0], buf[1], buf[2]); + err("CI error %d; %02X %02X %02X -> %*ph.", + ret, SYNC_BYTE_OUT, id, cmd, 3, buf); return ret; } @@ -556,8 +556,7 @@ static int pctv452e_rc_query(struct dvb_usb_device *d) return ret; if (debug > 3) { - info("%s: read: %2d: %02x %02x %02x: ", __func__, - ret, rx[0], rx[1], rx[2]); + info("%s: read: %2d: %*ph: ", __func__, ret, 3, rx); for (i = 0; (i < rx[3]) && ((i+3) < PCTV_ANSWER_LEN); i++) info(" %02x", rx[i+3]); diff --git a/drivers/media/dvb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c similarity index 100% rename from drivers/media/dvb/dvb-usb/technisat-usb2.c rename to drivers/media/usb/dvb-usb/technisat-usb2.c diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/usb/dvb-usb/ttusb2.c similarity index 99% rename from drivers/media/dvb/dvb-usb/ttusb2.c rename to drivers/media/usb/dvb-usb/ttusb2.c index e53a1061cb8e4451eeda3251376c9c0461106761..6a50cdea3bcee539a79ccecd9a211c13309b803d 100644 --- a/drivers/media/dvb/dvb-usb/ttusb2.c +++ b/drivers/media/usb/dvb-usb/ttusb2.c @@ -440,7 +440,7 @@ static int tt3650_rc_query(struct dvb_usb_device *d) /* got a "press" event */ st->last_rc_key = (rx[3] << 8) | rx[2]; deb_info("%s: cmd=0x%02x sys=0x%02x\n", __func__, rx[2], rx[3]); - rc_keydown(d->rc_dev, st->last_rc_key, 0); + rc_keydown(d->rc_dev, st->last_rc_key, rx[1]); } else if (st->last_rc_key) { rc_keyup(d->rc_dev); st->last_rc_key = 0; diff --git a/drivers/media/dvb/dvb-usb/ttusb2.h b/drivers/media/usb/dvb-usb/ttusb2.h similarity index 100% rename from drivers/media/dvb/dvb-usb/ttusb2.h rename to drivers/media/usb/dvb-usb/ttusb2.h diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/usb/dvb-usb/umt-010.c similarity index 100% rename from drivers/media/dvb/dvb-usb/umt-010.c rename to drivers/media/usb/dvb-usb/umt-010.c diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/usb/dvb-usb/usb-urb.c similarity index 100% rename from drivers/media/dvb/dvb-usb/usb-urb.c rename to drivers/media/usb/dvb-usb/usb-urb.c diff --git a/drivers/media/dvb/dvb-usb/vp702x-fe.c b/drivers/media/usb/dvb-usb/vp702x-fe.c similarity index 100% rename from drivers/media/dvb/dvb-usb/vp702x-fe.c rename to drivers/media/usb/dvb-usb/vp702x-fe.c diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/usb/dvb-usb/vp702x.c similarity index 100% rename from drivers/media/dvb/dvb-usb/vp702x.c rename to drivers/media/usb/dvb-usb/vp702x.c diff --git a/drivers/media/dvb/dvb-usb/vp702x.h b/drivers/media/usb/dvb-usb/vp702x.h similarity index 100% rename from drivers/media/dvb/dvb-usb/vp702x.h rename to drivers/media/usb/dvb-usb/vp702x.h diff --git a/drivers/media/dvb/dvb-usb/vp7045-fe.c b/drivers/media/usb/dvb-usb/vp7045-fe.c similarity index 100% rename from drivers/media/dvb/dvb-usb/vp7045-fe.c rename to drivers/media/usb/dvb-usb/vp7045-fe.c diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/usb/dvb-usb/vp7045.c similarity index 100% rename from drivers/media/dvb/dvb-usb/vp7045.c rename to drivers/media/usb/dvb-usb/vp7045.c diff --git a/drivers/media/dvb/dvb-usb/vp7045.h b/drivers/media/usb/dvb-usb/vp7045.h similarity index 100% rename from drivers/media/dvb/dvb-usb/vp7045.h rename to drivers/media/usb/dvb-usb/vp7045.h diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig similarity index 67% rename from drivers/media/video/em28xx/Kconfig rename to drivers/media/usb/em28xx/Kconfig index 928ef0d0429f2855062654956577943ef8c5f032..7a5bd61bd3bbb039fdb74bbb291bd1110d67ab02 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/usb/em28xx/Kconfig @@ -4,10 +4,10 @@ config VIDEO_EM28XX select VIDEO_TUNER select VIDEO_TVEEPROM select VIDEOBUF_VMALLOC - select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_TVP5150 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT + select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT ---help--- This is a video4linux driver for Empia 28xx based TV cards. @@ -33,16 +33,16 @@ config VIDEO_EM28XX_ALSA config VIDEO_EM28XX_DVB tristate "DVB/ATSC Support for em28xx based TV cards" depends on VIDEO_EM28XX && DVB_CORE - select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_TDA10023 if !DVB_FE_CUSTOMISE - select DVB_S921 if !DVB_FE_CUSTOMISE - select DVB_DRXD if !DVB_FE_CUSTOMISE - select DVB_CXD2820R if !DVB_FE_CUSTOMISE - select DVB_DRXK if !DVB_FE_CUSTOMISE - select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE - select DVB_TDA10071 if !DVB_FE_CUSTOMISE - select DVB_A8293 if !DVB_FE_CUSTOMISE + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select DVB_S921 if MEDIA_SUBDRV_AUTOSELECT + select DVB_DRXD if MEDIA_SUBDRV_AUTOSELECT + select DVB_CXD2820R if MEDIA_SUBDRV_AUTOSELECT + select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT + select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT select VIDEOBUF_DVB ---help--- This adds support for DVB cards based on the diff --git a/drivers/media/video/em28xx/Makefile b/drivers/media/usb/em28xx/Makefile similarity index 57% rename from drivers/media/video/em28xx/Makefile rename to drivers/media/usb/em28xx/Makefile index c8b338d4be05b270c9415899d9fd771a05a8d933..634fb920dd39c47ca4e7f31e7eed400553f54a7d 100644 --- a/drivers/media/video/em28xx/Makefile +++ b/drivers/media/usb/em28xx/Makefile @@ -1,4 +1,4 @@ -em28xx-y := em28xx-video.o em28xx-i2c.o em28xx-cards.o +em28xx-y += em28xx-video.o em28xx-i2c.o em28xx-cards.o em28xx-y += em28xx-core.o em28xx-vbi.o em28xx-alsa-objs := em28xx-audio.o @@ -9,7 +9,7 @@ obj-$(CONFIG_VIDEO_EM28XX_ALSA) += em28xx-alsa.o obj-$(CONFIG_VIDEO_EM28XX_DVB) += em28xx-dvb.o obj-$(CONFIG_VIDEO_EM28XX_RC) += em28xx-rc.o -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c similarity index 99% rename from drivers/media/video/em28xx/em28xx-audio.c rename to drivers/media/usb/em28xx/em28xx-audio.c index 07dc594e79f04bea706c8cebfba1b514a8a3623e..2fdb66ee44ab7532b7e0d6a9bf3e043eddec8a87 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/usb/em28xx/em28xx-audio.c @@ -306,7 +306,6 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); dev->adev.capture_pcm_substream = substream; - runtime->private_data = dev; return 0; err: diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c similarity index 99% rename from drivers/media/video/em28xx/em28xx-cards.c rename to drivers/media/usb/em28xx/em28xx-cards.c index ca62b9981380427b587efb684d36a60f88105a21..ab98d0845861bbbe4fdb3027fe7ccd2391b2ac34 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -2875,12 +2875,20 @@ static void em28xx_card_setup(struct em28xx *dev) } -#if defined(CONFIG_MODULES) && defined(MODULE) static void request_module_async(struct work_struct *work) { struct em28xx *dev = container_of(work, struct em28xx, request_module_wk); + /* + * The em28xx extensions can be modules or builtin. If the + * modules are already loaded or are built in, those extensions + * can be initialised right now. Otherwise, the module init + * code will do it. + */ + em28xx_init_extension(dev); + +#if defined(CONFIG_MODULES) && defined(MODULE) if (dev->has_audio_class) request_module("snd-usb-audio"); else if (dev->has_alsa_audio) @@ -2890,6 +2898,7 @@ static void request_module_async(struct work_struct *work) request_module("em28xx-dvb"); if (dev->board.ir_codes && !disable_ir) request_module("em28xx-rc"); +#endif /* CONFIG_MODULES */ } static void request_modules(struct em28xx *dev) @@ -2902,10 +2911,6 @@ static void flush_request_modules(struct em28xx *dev) { flush_work_sync(&dev->request_module_wk); } -#else -#define request_modules(dev) -#define flush_request_modules(dev) -#endif /* CONFIG_MODULES */ /* * em28xx_release_resources() @@ -3324,13 +3329,6 @@ static int em28xx_usb_probe(struct usb_interface *interface, */ mutex_unlock(&dev->lock); - /* - * These extensions can be modules. If the modules are already - * loaded then we can initialise the device now, otherwise we - * will initialise it when the modules load instead. - */ - em28xx_init_extension(dev); - return 0; unlock_and_free: diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c similarity index 99% rename from drivers/media/video/em28xx/em28xx-core.c rename to drivers/media/usb/em28xx/em28xx-core.c index de2cb20ad2cc1d676c6aa0c532e36bc251c4273e..bed07a6c33f8156df80919725c05857cd0fd9b37 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/usb/em28xx/em28xx-core.c @@ -785,12 +785,8 @@ int em28xx_resolution_set(struct em28xx *dev) else dev->vbi_height = 18; - if (!dev->progressive) - height >>= norm_maxh(dev); - em28xx_set_outfmt(dev); - em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2); /* If we don't set the start position to 2 in VBI mode, we end up diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c similarity index 95% rename from drivers/media/video/em28xx/em28xx-dvb.c rename to drivers/media/usb/em28xx/em28xx-dvb.c index a16531fa937a1ec395e3490e741e0d46d0a3cccd..913e5227897a3c4b68a7ad51ec254c7bb51d41e0 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/usb/em28xx/em28xx-dvb.c @@ -28,6 +28,7 @@ #include #include #include "tuner-simple.h" +#include #include "lgdt330x.h" #include "lgdt3305.h" @@ -80,6 +81,7 @@ struct em28xx_dvb { int (*gate_ctrl)(struct dvb_frontend *, int); struct semaphore pll_mutex; bool dont_attach_fe1; + int lna_gpio; }; @@ -316,6 +318,7 @@ static struct drxk_config terratec_h5_drxk = { .no_i2c_bridge = 1, .microcode_name = "dvb-usb-terratec-h5-drxk.fw", .qam_demod_parameter_count = 2, + .load_firmware_sync = true, }; static struct drxk_config hauppauge_930c_drxk = { @@ -325,6 +328,7 @@ static struct drxk_config hauppauge_930c_drxk = { .microcode_name = "dvb-usb-hauppauge-hvr930c-drxk.fw", .chunk_size = 56, .qam_demod_parameter_count = 2, + .load_firmware_sync = true, }; struct drxk_config terratec_htc_stick_drxk = { @@ -338,12 +342,14 @@ struct drxk_config terratec_htc_stick_drxk = { .antenna_dvbt = true, /* The windows driver uses the same. This will disable LNA. */ .antenna_gpio = 0x6, + .load_firmware_sync = true, }; static struct drxk_config maxmedia_ub425_tc_drxk = { .adr = 0x29, .single_master = 1, .no_i2c_bridge = 1, + .load_firmware_sync = true, }; static struct drxk_config pctv_520e_drxk = { @@ -354,6 +360,7 @@ static struct drxk_config pctv_520e_drxk = { .chunk_size = 58, .antenna_dvbt = true, /* disable LNA */ .antenna_gpio = (1 << 2), /* disable LNA */ + .load_firmware_sync = true, }; static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) @@ -567,6 +574,33 @@ static void pctv_520e_init(struct em28xx *dev) i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len); }; +static int em28xx_pctv_290e_set_lna(struct dvb_frontend *fe, int val) +{ + struct em28xx *dev = fe->dvb->priv; +#ifdef CONFIG_GPIOLIB + struct em28xx_dvb *dvb = dev->dvb; + int ret; + unsigned long flags; + + if (val) + flags = GPIOF_OUT_INIT_LOW; + else + flags = GPIOF_OUT_INIT_HIGH; + + ret = gpio_request_one(dvb->lna_gpio, flags, NULL); + if (ret) + em28xx_errdev("gpio request failed %d\n", ret); + else + gpio_free(dvb->lna_gpio); + + return ret; +#else + dev_warn(&dev->udev->dev, "%s: LNA control is disabled\n", + KBUILD_MODNAME); + return 0; +#endif +} + static int em28xx_mt352_terratec_xs_init(struct dvb_frontend *fe) { /* Values extracted from a USB trace of the Terratec Windows driver */ @@ -610,11 +644,6 @@ static struct tda10023_config em28xx_tda10023_config = { static struct cxd2820r_config em28xx_cxd2820r_config = { .i2c_address = (0xd8 >> 1), .ts_mode = CXD2820R_TS_SERIAL, - - /* enable LNA for DVB-T, DVB-T2 and DVB-C */ - .gpio_dvbt[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L, - .gpio_dvbt2[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L, - .gpio_dvbc[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L, }; static struct tda18271_config em28xx_cxd2820r_tda18271_config = { @@ -959,9 +988,13 @@ static int em28xx_dvb_init(struct em28xx *dev) &dev->i2c_adap, &kworld_a340_config); break; case EM28174_BOARD_PCTV_290E: + /* set default GPIO0 for LNA, used if GPIOLIB is undefined */ + dvb->lna_gpio = CXD2820R_GPIO_E | CXD2820R_GPIO_O | + CXD2820R_GPIO_L; dvb->fe[0] = dvb_attach(cxd2820r_attach, &em28xx_cxd2820r_config, - &dev->i2c_adap); + &dev->i2c_adap, + &dvb->lna_gpio); if (dvb->fe[0]) { /* FE 0 attach tuner */ if (!dvb_attach(tda18271_attach, @@ -974,7 +1007,22 @@ static int em28xx_dvb_init(struct em28xx *dev) result = -EINVAL; goto out_free; } + +#ifdef CONFIG_GPIOLIB + /* enable LNA for DVB-T, DVB-T2 and DVB-C */ + result = gpio_request_one(dvb->lna_gpio, + GPIOF_OUT_INIT_LOW, NULL); + if (result) + em28xx_errdev("gpio request failed %d\n", + result); + else + gpio_free(dvb->lna_gpio); + + result = 0; /* continue even set LNA fails */ +#endif + dvb->fe[0]->ops.set_lna = em28xx_pctv_290e_set_lna; } + break; case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: { diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c similarity index 100% rename from drivers/media/video/em28xx/em28xx-i2c.c rename to drivers/media/usb/em28xx/em28xx-i2c.c diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c similarity index 100% rename from drivers/media/video/em28xx/em28xx-input.c rename to drivers/media/usb/em28xx/em28xx-input.c diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h similarity index 100% rename from drivers/media/video/em28xx/em28xx-reg.h rename to drivers/media/usb/em28xx/em28xx-reg.h diff --git a/drivers/media/video/em28xx/em28xx-vbi.c b/drivers/media/usb/em28xx/em28xx-vbi.c similarity index 100% rename from drivers/media/video/em28xx/em28xx-vbi.c rename to drivers/media/usb/em28xx/em28xx-vbi.c diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c similarity index 98% rename from drivers/media/video/em28xx/em28xx-video.c rename to drivers/media/usb/em28xx/em28xx-video.c index 50f5f4fc2148ce76db99619930137345e3d4b0a3..1e553d3573805795dc8cb1debdbd50f82d6a42c4 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/usb/em28xx/em28xx-video.c @@ -1352,7 +1352,7 @@ static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) return 0; } -static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) +static int vidioc_s_audio(struct file *file, void *priv, const struct v4l2_audio *a) { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; @@ -2087,7 +2087,7 @@ static int radio_s_tuner(struct file *file, void *priv, } static int radio_s_audio(struct file *file, void *fh, - struct v4l2_audio *a) + const struct v4l2_audio *a) { return 0; } @@ -2146,9 +2146,12 @@ static int em28xx_v4l2_open(struct file *filp) dev->users); + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL); if (!fh) { em28xx_errdev("em28xx-video.c: Out of memory?!\n"); + mutex_unlock(&dev->lock); return -ENOMEM; } fh->dev = dev; @@ -2189,6 +2192,7 @@ static int em28xx_v4l2_open(struct file *filp) V4L2_BUF_TYPE_VBI_CAPTURE, V4L2_FIELD_SEQ_TB, sizeof(struct em28xx_buffer), fh, &dev->lock); + mutex_unlock(&dev->lock); return errCode; } @@ -2243,6 +2247,7 @@ static int em28xx_v4l2_close(struct file *filp) em28xx_videodbg("users=%d\n", dev->users); + mutex_lock(&dev->lock); if (res_check(fh, EM28XX_RESOURCE_VIDEO)) { videobuf_stop(&fh->vb_vidq); res_free(fh, EM28XX_RESOURCE_VIDEO); @@ -2259,6 +2264,7 @@ static int em28xx_v4l2_close(struct file *filp) if (dev->state & DEV_DISCONNECTED) { em28xx_release_resources(dev); kfree(dev->alt_max_pkt_size); + mutex_unlock(&dev->lock); kfree(dev); kfree(fh); return 0; @@ -2285,6 +2291,7 @@ static int em28xx_v4l2_close(struct file *filp) videobuf_mmap_free(&fh->vb_vbiq); kfree(fh); dev->users--; + mutex_unlock(&dev->lock); return 0; } @@ -2304,35 +2311,35 @@ em28xx_v4l2_read(struct file *filp, char __user *buf, size_t count, if (rc < 0) return rc; + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; /* FIXME: read() is not prepared to allow changing the video resolution while streaming. Seems a bug at em28xx_set_fmt */ if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { if (res_locked(dev, EM28XX_RESOURCE_VIDEO)) - return -EBUSY; - - return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0, + rc = -EBUSY; + else + rc = videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0, filp->f_flags & O_NONBLOCK); - } - - - if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { + } else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { if (!res_get(fh, EM28XX_RESOURCE_VBI)) - return -EBUSY; - - return videobuf_read_stream(&fh->vb_vbiq, buf, count, pos, 0, + rc = -EBUSY; + else + rc = videobuf_read_stream(&fh->vb_vbiq, buf, count, pos, 0, filp->f_flags & O_NONBLOCK); } + mutex_unlock(&dev->lock); - return 0; + return rc; } /* - * em28xx_v4l2_poll() + * em28xx_poll() * will allocate buffers when called for the first time */ -static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table *wait) +static unsigned int em28xx_poll(struct file *filp, poll_table *wait) { struct em28xx_fh *fh = filp->private_data; struct em28xx *dev = fh->dev; @@ -2355,6 +2362,18 @@ static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table *wait) } } +static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table *wait) +{ + struct em28xx_fh *fh = filp->private_data; + struct em28xx *dev = fh->dev; + unsigned int res; + + mutex_lock(&dev->lock); + res = em28xx_poll(filp, wait); + mutex_unlock(&dev->lock); + return res; +} + /* * em28xx_v4l2_mmap() */ @@ -2368,10 +2387,13 @@ static int em28xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) if (rc < 0) return rc; + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) rc = videobuf_mmap_mapper(&fh->vb_vidq, vma); else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) rc = videobuf_mmap_mapper(&fh->vb_vbiq, vma); + mutex_unlock(&dev->lock); em28xx_videodbg("vma start=0x%08lx, size=%ld, ret=%d\n", (unsigned long)vma->vm_start, @@ -2495,10 +2517,6 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev, vfd->release = video_device_release; vfd->debug = video_debug; vfd->lock = &dev->lock; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vfd->flags); snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h similarity index 100% rename from drivers/media/video/em28xx/em28xx.h rename to drivers/media/usb/em28xx/em28xx.h diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/usb/gspca/Kconfig similarity index 98% rename from drivers/media/video/gspca/Kconfig rename to drivers/media/usb/gspca/Kconfig index dfe268bfa4f8f55a1e18139515546cd45365eb93..6345f9331e7fa15f173cce993970a93ba7ca197d 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/usb/gspca/Kconfig @@ -17,9 +17,9 @@ menuconfig USB_GSPCA if USB_GSPCA && VIDEO_V4L2 -source "drivers/media/video/gspca/m5602/Kconfig" -source "drivers/media/video/gspca/stv06xx/Kconfig" -source "drivers/media/video/gspca/gl860/Kconfig" +source "drivers/media/usb/gspca/m5602/Kconfig" +source "drivers/media/usb/gspca/stv06xx/Kconfig" +source "drivers/media/usb/gspca/gl860/Kconfig" config USB_GSPCA_BENQ tristate "Benq USB Camera Driver" diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/usb/gspca/Makefile similarity index 100% rename from drivers/media/video/gspca/Makefile rename to drivers/media/usb/gspca/Makefile diff --git a/drivers/media/video/gspca/autogain_functions.c b/drivers/media/usb/gspca/autogain_functions.c similarity index 100% rename from drivers/media/video/gspca/autogain_functions.c rename to drivers/media/usb/gspca/autogain_functions.c diff --git a/drivers/media/video/gspca/autogain_functions.h b/drivers/media/usb/gspca/autogain_functions.h similarity index 100% rename from drivers/media/video/gspca/autogain_functions.h rename to drivers/media/usb/gspca/autogain_functions.h diff --git a/drivers/media/video/gspca/benq.c b/drivers/media/usb/gspca/benq.c similarity index 100% rename from drivers/media/video/gspca/benq.c rename to drivers/media/usb/gspca/benq.c diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/usb/gspca/conex.c similarity index 100% rename from drivers/media/video/gspca/conex.c rename to drivers/media/usb/gspca/conex.c diff --git a/drivers/media/video/gspca/cpia1.c b/drivers/media/usb/gspca/cpia1.c similarity index 99% rename from drivers/media/video/gspca/cpia1.c rename to drivers/media/usb/gspca/cpia1.c index 2499a881d9a3ab68c8a4190f9ac19fb6d41ad3ed..b3ba47d4d6a2932fd518f00bc05947d73004839e 100644 --- a/drivers/media/video/gspca/cpia1.c +++ b/drivers/media/usb/gspca/cpia1.c @@ -751,7 +751,7 @@ static int goto_high_power(struct gspca_dev *gspca_dev) if (signal_pending(current)) return -EINTR; - do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0); + ret = do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0); if (ret) return ret; diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/usb/gspca/etoms.c similarity index 100% rename from drivers/media/video/gspca/etoms.c rename to drivers/media/usb/gspca/etoms.c diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c similarity index 92% rename from drivers/media/video/gspca/finepix.c rename to drivers/media/usb/gspca/finepix.c index c8f2201cc35ad96403230150b999363a7f362a93..52bdb569760b4139bb20dfca693746b5a267ddf6 100644 --- a/drivers/media/video/gspca/finepix.c +++ b/drivers/media/usb/gspca/finepix.c @@ -77,7 +77,14 @@ static int command(struct gspca_dev *gspca_dev, 12, FPIX_TIMEOUT); } -/* workqueue */ +/* + * This function is called as a workqueue function and runs whenever the camera + * is streaming data. Because it is a workqueue function it is allowed to sleep + * so we can use synchronous USB calls. To avoid possible collisions with other + * threads attempting to use gspca_dev->usb_buf we take the usb_lock when + * performing USB operations using it. In practice we don't really need this + * as the camera doesn't provide any controls. + */ static void dostream(struct work_struct *work) { struct usb_fpix *dev = container_of(work, struct usb_fpix, work_struct); @@ -87,14 +94,11 @@ static void dostream(struct work_struct *work) int ret = 0; int len; - /* synchronize with the main driver */ - mutex_lock(&gspca_dev->usb_lock); - mutex_unlock(&gspca_dev->usb_lock); PDEBUG(D_STREAM, "dostream started"); /* loop reading a frame */ again: - while (gspca_dev->dev && gspca_dev->streaming) { + while (gspca_dev->present && gspca_dev->streaming) { #ifdef CONFIG_PM if (gspca_dev->frozen) break; @@ -110,7 +114,7 @@ static void dostream(struct work_struct *work) if (gspca_dev->frozen) break; #endif - if (!gspca_dev->dev || !gspca_dev->streaming) + if (!gspca_dev->present || !gspca_dev->streaming) break; /* the frame comes in parts */ @@ -129,7 +133,7 @@ static void dostream(struct work_struct *work) if (gspca_dev->frozen) goto out; #endif - if (!gspca_dev->dev || !gspca_dev->streaming) + if (!gspca_dev->present || !gspca_dev->streaming) goto out; if (len < FPIX_MAX_TRANSFER || (data[len - 2] == 0xff && diff --git a/drivers/media/video/gspca/gl860/Kconfig b/drivers/media/usb/gspca/gl860/Kconfig similarity index 100% rename from drivers/media/video/gspca/gl860/Kconfig rename to drivers/media/usb/gspca/gl860/Kconfig diff --git a/drivers/media/video/gspca/gl860/Makefile b/drivers/media/usb/gspca/gl860/Makefile similarity index 75% rename from drivers/media/video/gspca/gl860/Makefile rename to drivers/media/usb/gspca/gl860/Makefile index 773ea3426561c68588f43502b2b0278a3ff2c542..cf6397415aad6bc0534aa2510b80b3b8d8ccb603 100644 --- a/drivers/media/video/gspca/gl860/Makefile +++ b/drivers/media/usb/gspca/gl860/Makefile @@ -6,5 +6,5 @@ gspca_gl860-objs := gl860.o \ gl860-ov9655.o \ gl860-mi2020.o -ccflags-y += -I$(srctree)/drivers/media/video/gspca +ccflags-y += -I$(srctree)/drivers/media/usb/gspca diff --git a/drivers/media/video/gspca/gl860/gl860-mi1320.c b/drivers/media/usb/gspca/gl860/gl860-mi1320.c similarity index 100% rename from drivers/media/video/gspca/gl860/gl860-mi1320.c rename to drivers/media/usb/gspca/gl860/gl860-mi1320.c diff --git a/drivers/media/video/gspca/gl860/gl860-mi2020.c b/drivers/media/usb/gspca/gl860/gl860-mi2020.c similarity index 100% rename from drivers/media/video/gspca/gl860/gl860-mi2020.c rename to drivers/media/usb/gspca/gl860/gl860-mi2020.c diff --git a/drivers/media/video/gspca/gl860/gl860-ov2640.c b/drivers/media/usb/gspca/gl860/gl860-ov2640.c similarity index 100% rename from drivers/media/video/gspca/gl860/gl860-ov2640.c rename to drivers/media/usb/gspca/gl860/gl860-ov2640.c diff --git a/drivers/media/video/gspca/gl860/gl860-ov9655.c b/drivers/media/usb/gspca/gl860/gl860-ov9655.c similarity index 100% rename from drivers/media/video/gspca/gl860/gl860-ov9655.c rename to drivers/media/usb/gspca/gl860/gl860-ov9655.c diff --git a/drivers/media/video/gspca/gl860/gl860.c b/drivers/media/usb/gspca/gl860/gl860.c similarity index 100% rename from drivers/media/video/gspca/gl860/gl860.c rename to drivers/media/usb/gspca/gl860/gl860.c diff --git a/drivers/media/video/gspca/gl860/gl860.h b/drivers/media/usb/gspca/gl860/gl860.h similarity index 100% rename from drivers/media/video/gspca/gl860/gl860.h rename to drivers/media/usb/gspca/gl860/gl860.h diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/usb/gspca/gspca.c similarity index 99% rename from drivers/media/video/gspca/gspca.c rename to drivers/media/usb/gspca/gspca.c index d4e8343f5b1013b17b1d9541bbaf287c193a6b48..a2b934146ebf9245da1a972b36addc89eb7b026c 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/usb/gspca/gspca.c @@ -1686,7 +1686,7 @@ static int vidioc_g_jpegcomp(struct file *file, void *priv, } static int vidioc_s_jpegcomp(struct file *file, void *priv, - struct v4l2_jpegcompression *jpegcomp) + const struct v4l2_jpegcompression *jpegcomp) { struct gspca_dev *gspca_dev = video_drvdata(file); @@ -2358,8 +2358,6 @@ void gspca_disconnect(struct usb_interface *intf) mutex_lock(&gspca_dev->usb_lock); - usb_set_intfdata(intf, NULL); - gspca_dev->dev = NULL; gspca_dev->present = 0; destroy_urbs(gspca_dev); @@ -2375,6 +2373,7 @@ void gspca_disconnect(struct usb_interface *intf) if (gspca_dev->sd_desc->stop0 && gspca_dev->streaming) gspca_dev->sd_desc->stop0(gspca_dev); gspca_dev->streaming = 0; + gspca_dev->dev = NULL; wake_up_interruptible(&gspca_dev->wq); v4l2_device_disconnect(&gspca_dev->v4l2_dev); @@ -2392,19 +2391,22 @@ int gspca_suspend(struct usb_interface *intf, pm_message_t message) { struct gspca_dev *gspca_dev = usb_get_intfdata(intf); + gspca_input_destroy_urb(gspca_dev); + if (!gspca_dev->streaming) return 0; + mutex_lock(&gspca_dev->usb_lock); gspca_dev->frozen = 1; /* avoid urb error messages */ gspca_dev->usb_err = 0; if (gspca_dev->sd_desc->stopN) gspca_dev->sd_desc->stopN(gspca_dev); destroy_urbs(gspca_dev); - gspca_input_destroy_urb(gspca_dev); gspca_set_alt0(gspca_dev); if (gspca_dev->sd_desc->stop0) gspca_dev->sd_desc->stop0(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); + return 0; } EXPORT_SYMBOL(gspca_suspend); @@ -2418,7 +2420,6 @@ int gspca_resume(struct usb_interface *intf) gspca_dev->frozen = 0; gspca_dev->usb_err = 0; gspca_dev->sd_desc->init(gspca_dev); - gspca_input_create_urb(gspca_dev); /* * Most subdrivers send all ctrl values on sd_start and thus * only write to the device registers on s_ctrl when streaming -> @@ -2428,7 +2429,10 @@ int gspca_resume(struct usb_interface *intf) gspca_dev->streaming = 0; if (streaming) ret = gspca_init_transfer(gspca_dev); + else + gspca_input_create_urb(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); + return ret; } EXPORT_SYMBOL(gspca_resume); diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/usb/gspca/gspca.h similarity index 97% rename from drivers/media/video/gspca/gspca.h rename to drivers/media/usb/gspca/gspca.h index dc688c7f5e4811845ce5f8add9de98a3ea2cdeec..e3eab82cd4e5d31097b064e654e18a9079d8ee43 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/usb/gspca/gspca.h @@ -83,8 +83,10 @@ struct gspca_frame; typedef int (*cam_op) (struct gspca_dev *); typedef void (*cam_v_op) (struct gspca_dev *); typedef int (*cam_cf_op) (struct gspca_dev *, const struct usb_device_id *); -typedef int (*cam_jpg_op) (struct gspca_dev *, +typedef int (*cam_get_jpg_op) (struct gspca_dev *, struct v4l2_jpegcompression *); +typedef int (*cam_set_jpg_op) (struct gspca_dev *, + const struct v4l2_jpegcompression *); typedef int (*cam_reg_op) (struct gspca_dev *, struct v4l2_dbg_register *); typedef int (*cam_ident_op) (struct gspca_dev *, @@ -126,8 +128,8 @@ struct sd_desc { cam_v_op stopN; /* called on stream off - main alt */ cam_v_op stop0; /* called on stream off & disconnect - alt 0 */ cam_v_op dq_callback; /* called when a frame has been dequeued */ - cam_jpg_op get_jcomp; - cam_jpg_op set_jcomp; + cam_get_jpg_op get_jcomp; + cam_set_jpg_op set_jcomp; cam_qmnu_op querymenu; cam_streamparm_op get_streamparm; cam_streamparm_op set_streamparm; diff --git a/drivers/media/video/gspca/jeilinj.c b/drivers/media/usb/gspca/jeilinj.c similarity index 99% rename from drivers/media/video/gspca/jeilinj.c rename to drivers/media/usb/gspca/jeilinj.c index 26b99310d628f50d4be973e317f7a84104d0c449..b897aa86f315665645808efa95be5b11d3ac2171 100644 --- a/drivers/media/video/gspca/jeilinj.c +++ b/drivers/media/usb/gspca/jeilinj.c @@ -474,7 +474,7 @@ static int sd_init_controls(struct gspca_dev *gspca_dev) } static int sd_set_jcomp(struct gspca_dev *gspca_dev, - struct v4l2_jpegcompression *jcomp) + const struct v4l2_jpegcompression *jcomp) { struct sd *sd = (struct sd *) gspca_dev; diff --git a/drivers/media/video/gspca/jl2005bcd.c b/drivers/media/usb/gspca/jl2005bcd.c similarity index 95% rename from drivers/media/video/gspca/jl2005bcd.c rename to drivers/media/usb/gspca/jl2005bcd.c index cf9d9fca5b84005cd37e24cba853c9d132e504be..62ba80d9b9988478dbc9727eb1b6a50d210b583c 100644 --- a/drivers/media/video/gspca/jl2005bcd.c +++ b/drivers/media/usb/gspca/jl2005bcd.c @@ -306,15 +306,13 @@ static int jl2005c_stop(struct gspca_dev *gspca_dev) return retval; } -/* This function is called as a workqueue function and runs whenever the camera +/* + * This function is called as a workqueue function and runs whenever the camera * is streaming data. Because it is a workqueue function it is allowed to sleep * so we can use synchronous USB calls. To avoid possible collisions with other - * threads attempting to use the camera's USB interface the gspca usb_lock is - * used when performing the one USB control operation inside the workqueue, - * which tells the camera to close the stream. In practice the only thing - * which needs to be protected against is the usb_set_interface call that - * gspca makes during stream_off. Otherwise the camera doesn't provide any - * controls that the user could try to change. + * threads attempting to use gspca_dev->usb_buf we take the usb_lock when + * performing USB operations using it. In practice we don't really need this + * as the camera doesn't provide any controls. */ static void jl2005c_dostream(struct work_struct *work) { @@ -335,7 +333,7 @@ static void jl2005c_dostream(struct work_struct *work) goto quit_stream; } - while (gspca_dev->dev && gspca_dev->streaming) { + while (gspca_dev->present && gspca_dev->streaming) { #ifdef CONFIG_PM if (gspca_dev->frozen) break; @@ -371,7 +369,7 @@ static void jl2005c_dostream(struct work_struct *work) buffer, act_len); header_read = 1; } - while (bytes_left > 0 && gspca_dev->dev) { + while (bytes_left > 0 && gspca_dev->present) { data_len = bytes_left > JL2005C_MAX_TRANSFER ? JL2005C_MAX_TRANSFER : bytes_left; ret = usb_bulk_msg(gspca_dev->dev, @@ -394,7 +392,7 @@ static void jl2005c_dostream(struct work_struct *work) } } quit_stream: - if (gspca_dev->dev) { + if (gspca_dev->present) { mutex_lock(&gspca_dev->usb_lock); jl2005c_stop(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); @@ -512,7 +510,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0979, 0x0227)}, {} }; diff --git a/drivers/media/video/gspca/jpeg.h b/drivers/media/usb/gspca/jpeg.h similarity index 100% rename from drivers/media/video/gspca/jpeg.h rename to drivers/media/usb/gspca/jpeg.h diff --git a/drivers/media/video/gspca/kinect.c b/drivers/media/usb/gspca/kinect.c similarity index 100% rename from drivers/media/video/gspca/kinect.c rename to drivers/media/usb/gspca/kinect.c diff --git a/drivers/media/video/gspca/konica.c b/drivers/media/usb/gspca/konica.c similarity index 100% rename from drivers/media/video/gspca/konica.c rename to drivers/media/usb/gspca/konica.c diff --git a/drivers/media/video/gspca/m5602/Kconfig b/drivers/media/usb/gspca/m5602/Kconfig similarity index 100% rename from drivers/media/video/gspca/m5602/Kconfig rename to drivers/media/usb/gspca/m5602/Kconfig diff --git a/drivers/media/video/gspca/m5602/Makefile b/drivers/media/usb/gspca/m5602/Makefile similarity index 80% rename from drivers/media/video/gspca/m5602/Makefile rename to drivers/media/usb/gspca/m5602/Makefile index 575b75bacb62118ae5cb4b004c7fcec5dc7402b0..8e1fb5a1d2a1ef6b024d7500379abc9a69fcfce5 100644 --- a/drivers/media/video/gspca/m5602/Makefile +++ b/drivers/media/usb/gspca/m5602/Makefile @@ -8,4 +8,4 @@ gspca_m5602-objs := m5602_core.o \ m5602_s5k83a.o \ m5602_s5k4aa.o -ccflags-y += -I$(srctree)/drivers/media/video/gspca +ccflags-y += -I$(srctree)/drivers/media/usb/gspca diff --git a/drivers/media/video/gspca/m5602/m5602_bridge.h b/drivers/media/usb/gspca/m5602/m5602_bridge.h similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_bridge.h rename to drivers/media/usb/gspca/m5602/m5602_bridge.h diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/usb/gspca/m5602/m5602_core.c similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_core.c rename to drivers/media/usb/gspca/m5602/m5602_core.c diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.c b/drivers/media/usb/gspca/m5602/m5602_mt9m111.c similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_mt9m111.c rename to drivers/media/usb/gspca/m5602/m5602_mt9m111.c diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.h b/drivers/media/usb/gspca/m5602/m5602_mt9m111.h similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_mt9m111.h rename to drivers/media/usb/gspca/m5602/m5602_mt9m111.h diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/usb/gspca/m5602/m5602_ov7660.c similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_ov7660.c rename to drivers/media/usb/gspca/m5602/m5602_ov7660.c diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/usb/gspca/m5602/m5602_ov7660.h similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_ov7660.h rename to drivers/media/usb/gspca/m5602/m5602_ov7660.h diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/usb/gspca/m5602/m5602_ov9650.c similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_ov9650.c rename to drivers/media/usb/gspca/m5602/m5602_ov9650.c diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.h b/drivers/media/usb/gspca/m5602/m5602_ov9650.h similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_ov9650.h rename to drivers/media/usb/gspca/m5602/m5602_ov9650.h diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.c b/drivers/media/usb/gspca/m5602/m5602_po1030.c similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_po1030.c rename to drivers/media/usb/gspca/m5602/m5602_po1030.c diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.h b/drivers/media/usb/gspca/m5602/m5602_po1030.h similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_po1030.h rename to drivers/media/usb/gspca/m5602/m5602_po1030.h diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/usb/gspca/m5602/m5602_s5k4aa.c similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_s5k4aa.c rename to drivers/media/usb/gspca/m5602/m5602_s5k4aa.c diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h b/drivers/media/usb/gspca/m5602/m5602_s5k4aa.h similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_s5k4aa.h rename to drivers/media/usb/gspca/m5602/m5602_s5k4aa.h diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/usb/gspca/m5602/m5602_s5k83a.c similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_s5k83a.c rename to drivers/media/usb/gspca/m5602/m5602_s5k83a.c diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.h b/drivers/media/usb/gspca/m5602/m5602_s5k83a.h similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_s5k83a.h rename to drivers/media/usb/gspca/m5602/m5602_s5k83a.h diff --git a/drivers/media/video/gspca/m5602/m5602_sensor.h b/drivers/media/usb/gspca/m5602/m5602_sensor.h similarity index 100% rename from drivers/media/video/gspca/m5602/m5602_sensor.h rename to drivers/media/usb/gspca/m5602/m5602_sensor.h diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/usb/gspca/mars.c similarity index 100% rename from drivers/media/video/gspca/mars.c rename to drivers/media/usb/gspca/mars.c diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/usb/gspca/mr97310a.c similarity index 100% rename from drivers/media/video/gspca/mr97310a.c rename to drivers/media/usb/gspca/mr97310a.c diff --git a/drivers/media/video/gspca/nw80x.c b/drivers/media/usb/gspca/nw80x.c similarity index 100% rename from drivers/media/video/gspca/nw80x.c rename to drivers/media/usb/gspca/nw80x.c diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c similarity index 99% rename from drivers/media/video/gspca/ov519.c rename to drivers/media/usb/gspca/ov519.c index bfc7cefa59f8ac2a0dd55f2b706133a020307047..9aa09f845ce4c2ca05b1d4bf7e34575b19436dc9 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/usb/gspca/ov519.c @@ -141,14 +141,14 @@ enum sensors { /* table of the disabled controls */ struct ctrl_valid { - int has_brightness:1; - int has_contrast:1; - int has_exposure:1; - int has_autogain:1; - int has_sat:1; - int has_hvflip:1; - int has_autobright:1; - int has_freq:1; + unsigned int has_brightness:1; + unsigned int has_contrast:1; + unsigned int has_exposure:1; + unsigned int has_autogain:1; + unsigned int has_sat:1; + unsigned int has_hvflip:1; + unsigned int has_autobright:1; + unsigned int has_freq:1; }; static const struct ctrl_valid valid_controls[] = { @@ -4762,7 +4762,7 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev, } static int sd_set_jcomp(struct gspca_dev *gspca_dev, - struct v4l2_jpegcompression *jcomp) + const struct v4l2_jpegcompression *jcomp) { struct sd *sd = (struct sd *) gspca_dev; diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/usb/gspca/ov534.c similarity index 100% rename from drivers/media/video/gspca/ov534.c rename to drivers/media/usb/gspca/ov534.c diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/usb/gspca/ov534_9.c similarity index 100% rename from drivers/media/video/gspca/ov534_9.c rename to drivers/media/usb/gspca/ov534_9.c diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/usb/gspca/pac207.c similarity index 100% rename from drivers/media/video/gspca/pac207.c rename to drivers/media/usb/gspca/pac207.c diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/usb/gspca/pac7302.c similarity index 95% rename from drivers/media/video/gspca/pac7302.c rename to drivers/media/usb/gspca/pac7302.c index 4877f7ab3d597eba3574abbab1a3945b0b18cca6..2d5c6d8343a01c475291b3435de77cec7112ff35 100644 --- a/drivers/media/video/gspca/pac7302.c +++ b/drivers/media/usb/gspca/pac7302.c @@ -26,6 +26,20 @@ /* * Some documentation about various registers as determined by trial and error. * + * Register page 0: + * + * Address Description + * 0x02 Red balance control + * 0x03 Green balance control + * 0x04 Blue balance control + * Valus are inverted (0=max, 255=min). + * The Windows driver uses a quadratic approach to map + * the settable values (0-200) on register values: + * min=0x80, default=0x40, max=0x20 + * 0x0f-0x20 Colors, saturation and exposure control + * 0xa2-0xab Brightness, contrast and gamma control + * 0xb6 Sharpness control (bits 0-4) + * * Register page 1: * * Address Description @@ -66,6 +80,7 @@ * -----+------------+--------------------------------------------------- * 0 | 0x0f..0x20 | setcolors() * 0 | 0xa2..0xab | setbrightcont() + * 0 | 0xb6 | setsharpness() * 0 | 0xc5 | setredbalance() * 0 | 0xc6 | setwhitebalance() * 0 | 0xc7 | setbluebalance() @@ -109,6 +124,7 @@ struct sd { struct v4l2_ctrl *hflip; struct v4l2_ctrl *vflip; }; + struct v4l2_ctrl *sharpness; u8 flags; #define FL_HFLIP 0x01 /* mirrored by default */ #define FL_VFLIP 0x02 /* vertical flipped by default */ @@ -531,6 +547,16 @@ static void sethvflip(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x11, 0x01); } +static void setsharpness(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ + reg_w(gspca_dev, 0xb6, sd->sharpness->val); + + reg_w(gspca_dev, 0xdc, 0x01); +} + /* this function is called at probe and resume time for pac7302 */ static int sd_init(struct gspca_dev *gspca_dev) { @@ -584,6 +610,9 @@ static int sd_s_ctrl(struct v4l2_ctrl *ctrl) case V4L2_CID_HFLIP: sethvflip(gspca_dev); break; + case V4L2_CID_SHARPNESS: + setsharpness(gspca_dev); + break; default: return -EINVAL; } @@ -601,7 +630,7 @@ static int sd_init_controls(struct gspca_dev *gspca_dev) struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; gspca_dev->vdev.ctrl_handler = hdl; - v4l2_ctrl_handler_init(hdl, 11); + v4l2_ctrl_handler_init(hdl, 12); sd->brightness = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_BRIGHTNESS, 0, 32, 1, 16); @@ -612,11 +641,11 @@ static int sd_init_controls(struct gspca_dev *gspca_dev) V4L2_CID_SATURATION, 0, 255, 1, 127); sd->white_balance = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_WHITE_BALANCE_TEMPERATURE, - 0, 255, 1, 4); + 0, 255, 1, 55); sd->red_balance = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_RED_BALANCE, 0, 3, 1, 1); sd->blue_balance = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, - V4L2_CID_RED_BALANCE, 0, 3, 1, 1); + V4L2_CID_BLUE_BALANCE, 0, 3, 1, 1); gspca_dev->autogain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_AUTOGAIN, 0, 1, 1, 1); @@ -632,6 +661,9 @@ static int sd_init_controls(struct gspca_dev *gspca_dev) sd->vflip = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); + sd->sharpness = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, + V4L2_CID_SHARPNESS, 0, 15, 1, 8); + if (hdl->error) { pr_err("Could not initialize controls\n"); return hdl->error; @@ -650,14 +682,6 @@ static int sd_start(struct gspca_dev *gspca_dev) reg_w_var(gspca_dev, start_7302, page3_7302, sizeof(page3_7302)); - setbrightcont(gspca_dev); - setcolors(gspca_dev); - setwhitebalance(gspca_dev); - setredbalance(gspca_dev); - setbluebalance(gspca_dev); - setexposure(gspca_dev); - setgain(gspca_dev); - sethvflip(gspca_dev); sd->sof_read = 0; sd->autogain_ignore_frames = 0; @@ -905,6 +929,7 @@ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x262a)}, {USB_DEVICE(0x093a, 0x262c)}, {USB_DEVICE(0x145f, 0x013c)}, + {USB_DEVICE(0x1ae7, 0x2001)}, /* SpeedLink Snappy Mic SL-6825-SBK */ {} }; MODULE_DEVICE_TABLE(usb, device_table); diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/usb/gspca/pac7311.c similarity index 100% rename from drivers/media/video/gspca/pac7311.c rename to drivers/media/usb/gspca/pac7311.c diff --git a/drivers/media/video/gspca/pac_common.h b/drivers/media/usb/gspca/pac_common.h similarity index 100% rename from drivers/media/video/gspca/pac_common.h rename to drivers/media/usb/gspca/pac_common.h diff --git a/drivers/media/video/gspca/se401.c b/drivers/media/usb/gspca/se401.c similarity index 100% rename from drivers/media/video/gspca/se401.c rename to drivers/media/usb/gspca/se401.c diff --git a/drivers/media/video/gspca/se401.h b/drivers/media/usb/gspca/se401.h similarity index 100% rename from drivers/media/video/gspca/se401.h rename to drivers/media/usb/gspca/se401.h diff --git a/drivers/media/video/gspca/sn9c2028.c b/drivers/media/usb/gspca/sn9c2028.c similarity index 100% rename from drivers/media/video/gspca/sn9c2028.c rename to drivers/media/usb/gspca/sn9c2028.c diff --git a/drivers/media/video/gspca/sn9c2028.h b/drivers/media/usb/gspca/sn9c2028.h similarity index 100% rename from drivers/media/video/gspca/sn9c2028.h rename to drivers/media/usb/gspca/sn9c2028.h diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/usb/gspca/sn9c20x.c similarity index 99% rename from drivers/media/video/gspca/sn9c20x.c rename to drivers/media/usb/gspca/sn9c20x.c index b9c6f17eabb245fde118e3b198f163782d92a7bc..41f769fe340c9f1a6a9f01ef7a84e4e9feb323b1 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/usb/gspca/sn9c20x.c @@ -2197,8 +2197,10 @@ static void qual_upd(struct work_struct *work) struct gspca_dev *gspca_dev = &sd->gspca_dev; s32 qual = v4l2_ctrl_g_ctrl(sd->jpegqual); + /* To protect gspca_dev->usb_buf and gspca_dev->usb_err */ mutex_lock(&gspca_dev->usb_lock); PDEBUG(D_STREAM, "qual_upd %d%%", qual); + gspca_dev->usb_err = 0; set_quality(gspca_dev, qual); mutex_unlock(&gspca_dev->usb_lock); } diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/usb/gspca/sonixb.c similarity index 100% rename from drivers/media/video/gspca/sonixb.c rename to drivers/media/usb/gspca/sonixb.c diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/usb/gspca/sonixj.c similarity index 99% rename from drivers/media/video/gspca/sonixj.c rename to drivers/media/usb/gspca/sonixj.c index 150b2df40f7f56e54e29a5acffd7c7b42f3b3d13..5a86047b846f484c2d1c22d88023878d2249b646 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/usb/gspca/sonixj.c @@ -2380,8 +2380,10 @@ static void qual_upd(struct work_struct *work) struct sd *sd = container_of(work, struct sd, work); struct gspca_dev *gspca_dev = &sd->gspca_dev; + /* To protect gspca_dev->usb_buf and gspca_dev->usb_err */ mutex_lock(&gspca_dev->usb_lock); PDEBUG(D_STREAM, "qual_upd %d%%", sd->quality); + gspca_dev->usb_err = 0; setjpegqual(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); } diff --git a/drivers/media/video/gspca/spca1528.c b/drivers/media/usb/gspca/spca1528.c similarity index 100% rename from drivers/media/video/gspca/spca1528.c rename to drivers/media/usb/gspca/spca1528.c diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/usb/gspca/spca500.c similarity index 100% rename from drivers/media/video/gspca/spca500.c rename to drivers/media/usb/gspca/spca500.c diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/usb/gspca/spca501.c similarity index 100% rename from drivers/media/video/gspca/spca501.c rename to drivers/media/usb/gspca/spca501.c diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/usb/gspca/spca505.c similarity index 100% rename from drivers/media/video/gspca/spca505.c rename to drivers/media/usb/gspca/spca505.c diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/usb/gspca/spca506.c similarity index 99% rename from drivers/media/video/gspca/spca506.c rename to drivers/media/usb/gspca/spca506.c index 969bb5a4cd9307812cc45f2224f3be5bd1fa5617..bab01c86c3154933c819d941bbcfe3c6ffea60ef 100644 --- a/drivers/media/video/gspca/spca506.c +++ b/drivers/media/usb/gspca/spca506.c @@ -579,7 +579,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x06e1, 0xa190)}, /*fixme: may be IntelPCCameraPro BRIDGE_SPCA505 {USB_DEVICE(0x0733, 0x0430)}, */ diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/usb/gspca/spca508.c similarity index 100% rename from drivers/media/video/gspca/spca508.c rename to drivers/media/usb/gspca/spca508.c diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/usb/gspca/spca561.c similarity index 100% rename from drivers/media/video/gspca/spca561.c rename to drivers/media/usb/gspca/spca561.c diff --git a/drivers/media/video/gspca/sq905.c b/drivers/media/usb/gspca/sq905.c similarity index 95% rename from drivers/media/video/gspca/sq905.c rename to drivers/media/usb/gspca/sq905.c index a8ac97931ad68abe6986ab19fc959bc2596e0d5a..1d99f10a3e19962e4263acbdb630b8d6912165c8 100644 --- a/drivers/media/video/gspca/sq905.c +++ b/drivers/media/usb/gspca/sq905.c @@ -201,14 +201,13 @@ sq905_read_data(struct gspca_dev *gspca_dev, u8 *data, int size, int need_lock) return 0; } -/* This function is called as a workqueue function and runs whenever the camera +/* + * This function is called as a workqueue function and runs whenever the camera * is streaming data. Because it is a workqueue function it is allowed to sleep * so we can use synchronous USB calls. To avoid possible collisions with other - * threads attempting to use the camera's USB interface we take the gspca - * usb_lock when performing USB operations. In practice the only thing we need - * to protect against is the usb_set_interface call that gspca makes during - * stream_off as the camera doesn't provide any controls that the user could try - * to change. + * threads attempting to use gspca_dev->usb_buf we take the usb_lock when + * performing USB operations using it. In practice we don't really need this + * as the camera doesn't provide any controls. */ static void sq905_dostream(struct work_struct *work) { @@ -232,7 +231,7 @@ static void sq905_dostream(struct work_struct *work) frame_sz = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].sizeimage + FRAME_HEADER_LEN; - while (gspca_dev->dev && gspca_dev->streaming) { + while (gspca_dev->present && gspca_dev->streaming) { #ifdef CONFIG_PM if (gspca_dev->frozen) break; @@ -246,7 +245,7 @@ static void sq905_dostream(struct work_struct *work) we must finish reading an entire frame, otherwise the next time we stream we start reading in the middle of a frame. */ - while (bytes_left > 0 && gspca_dev->dev) { + while (bytes_left > 0 && gspca_dev->present) { data_len = bytes_left > SQ905_MAX_TRANSFER ? SQ905_MAX_TRANSFER : bytes_left; ret = sq905_read_data(gspca_dev, buffer, data_len, 1); @@ -278,7 +277,7 @@ static void sq905_dostream(struct work_struct *work) gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); } - if (gspca_dev->dev) { + if (gspca_dev->present) { /* acknowledge the frame */ mutex_lock(&gspca_dev->usb_lock); ret = sq905_ack_frame(gspca_dev); @@ -288,7 +287,7 @@ static void sq905_dostream(struct work_struct *work) } } quit_stream: - if (gspca_dev->dev) { + if (gspca_dev->present) { mutex_lock(&gspca_dev->usb_lock); sq905_command(gspca_dev, SQ905_CLEAR); mutex_unlock(&gspca_dev->usb_lock); diff --git a/drivers/media/video/gspca/sq905c.c b/drivers/media/usb/gspca/sq905c.c similarity index 91% rename from drivers/media/video/gspca/sq905c.c rename to drivers/media/usb/gspca/sq905c.c index 2c2f3d2f357f99afda2554d48feb89ede3fb8940..410cdcbb55d45984a9d81a9f630ad7bff4aca0bf 100644 --- a/drivers/media/video/gspca/sq905c.c +++ b/drivers/media/usb/gspca/sq905c.c @@ -123,15 +123,13 @@ static int sq905c_read(struct gspca_dev *gspca_dev, u16 command, u16 index, return 0; } -/* This function is called as a workqueue function and runs whenever the camera +/* + * This function is called as a workqueue function and runs whenever the camera * is streaming data. Because it is a workqueue function it is allowed to sleep * so we can use synchronous USB calls. To avoid possible collisions with other - * threads attempting to use the camera's USB interface the gspca usb_lock is - * used when performing the one USB control operation inside the workqueue, - * which tells the camera to close the stream. In practice the only thing - * which needs to be protected against is the usb_set_interface call that - * gspca makes during stream_off. Otherwise the camera doesn't provide any - * controls that the user could try to change. + * threads attempting to use gspca_dev->usb_buf we take the usb_lock when + * performing USB operations using it. In practice we don't really need this + * as the camera doesn't provide any controls. */ static void sq905c_dostream(struct work_struct *work) { @@ -150,7 +148,7 @@ static void sq905c_dostream(struct work_struct *work) goto quit_stream; } - while (gspca_dev->dev && gspca_dev->streaming) { + while (gspca_dev->present && gspca_dev->streaming) { #ifdef CONFIG_PM if (gspca_dev->frozen) break; @@ -173,7 +171,7 @@ static void sq905c_dostream(struct work_struct *work) packet_type = FIRST_PACKET; gspca_frame_add(gspca_dev, packet_type, buffer, FRAME_HEADER_LEN); - while (bytes_left > 0 && gspca_dev->dev) { + while (bytes_left > 0 && gspca_dev->present) { data_len = bytes_left > SQ905C_MAX_TRANSFER ? SQ905C_MAX_TRANSFER : bytes_left; ret = usb_bulk_msg(gspca_dev->dev, @@ -195,7 +193,7 @@ static void sq905c_dostream(struct work_struct *work) } } quit_stream: - if (gspca_dev->dev) { + if (gspca_dev->present) { mutex_lock(&gspca_dev->usb_lock); sq905c_command(gspca_dev, SQ905C_CLEAR, 0); mutex_unlock(&gspca_dev->usb_lock); @@ -228,11 +226,8 @@ static int sd_config(struct gspca_dev *gspca_dev, } /* Note we leave out the usb id and the manufacturing date */ PDEBUG(D_PROBE, - "SQ9050 ID string: %02x - %02x %02x %02x %02x %02x %02x", - gspca_dev->usb_buf[3], - gspca_dev->usb_buf[14], gspca_dev->usb_buf[15], - gspca_dev->usb_buf[16], gspca_dev->usb_buf[17], - gspca_dev->usb_buf[18], gspca_dev->usb_buf[19]); + "SQ9050 ID string: %02x - %*ph", + gspca_dev->usb_buf[3], 6, gspca_dev->usb_buf + 14); cam->cam_mode = sq905c_mode; cam->nmodes = 2; diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/usb/gspca/sq930x.c similarity index 99% rename from drivers/media/video/gspca/sq930x.c rename to drivers/media/usb/gspca/sq930x.c index 3e1e486af883dfaddc6cd8527c8c03a80dfd90c3..7e8748b31e858dddd1865735584d5657c531df02 100644 --- a/drivers/media/video/gspca/sq930x.c +++ b/drivers/media/usb/gspca/sq930x.c @@ -863,15 +863,7 @@ static int sd_init(struct gspca_dev *gspca_dev) * 6: c8 / c9 / ca / cf = mode webcam?, sensor? webcam? * 7: 00 */ - PDEBUG(D_PROBE, "info: %02x %02x %02x %02x %02x %02x %02x %02x", - gspca_dev->usb_buf[0], - gspca_dev->usb_buf[1], - gspca_dev->usb_buf[2], - gspca_dev->usb_buf[3], - gspca_dev->usb_buf[4], - gspca_dev->usb_buf[5], - gspca_dev->usb_buf[6], - gspca_dev->usb_buf[7]); + PDEBUG(D_PROBE, "info: %*ph", 8, gspca_dev->usb_buf); bridge_init(sd); diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/usb/gspca/stk014.c similarity index 100% rename from drivers/media/video/gspca/stk014.c rename to drivers/media/usb/gspca/stk014.c diff --git a/drivers/media/video/gspca/stv0680.c b/drivers/media/usb/gspca/stv0680.c similarity index 100% rename from drivers/media/video/gspca/stv0680.c rename to drivers/media/usb/gspca/stv0680.c diff --git a/drivers/media/video/gspca/stv06xx/Kconfig b/drivers/media/usb/gspca/stv06xx/Kconfig similarity index 100% rename from drivers/media/video/gspca/stv06xx/Kconfig rename to drivers/media/usb/gspca/stv06xx/Kconfig diff --git a/drivers/media/video/gspca/stv06xx/Makefile b/drivers/media/usb/gspca/stv06xx/Makefile similarity index 78% rename from drivers/media/video/gspca/stv06xx/Makefile rename to drivers/media/usb/gspca/stv06xx/Makefile index 38bc41061d8341b21455049ef24456b0a8306962..3a4b2f899049de856579231782aa8e809af59384 100644 --- a/drivers/media/video/gspca/stv06xx/Makefile +++ b/drivers/media/usb/gspca/stv06xx/Makefile @@ -6,5 +6,5 @@ gspca_stv06xx-objs := stv06xx.o \ stv06xx_pb0100.o \ stv06xx_st6422.o -ccflags-y += -I$(srctree)/drivers/media/video/gspca +ccflags-y += -I$(srctree)/drivers/media/usb/gspca diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/usb/gspca/stv06xx/stv06xx.c similarity index 100% rename from drivers/media/video/gspca/stv06xx/stv06xx.c rename to drivers/media/usb/gspca/stv06xx/stv06xx.c diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/usb/gspca/stv06xx/stv06xx.h similarity index 100% rename from drivers/media/video/gspca/stv06xx/stv06xx.h rename to drivers/media/usb/gspca/stv06xx/stv06xx.h diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.c similarity index 100% rename from drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c rename to drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.c diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h b/drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.h similarity index 100% rename from drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h rename to drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.h diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c b/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c similarity index 100% rename from drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c rename to drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h b/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.h similarity index 100% rename from drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h rename to drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.h diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h b/drivers/media/usb/gspca/stv06xx/stv06xx_sensor.h similarity index 100% rename from drivers/media/video/gspca/stv06xx/stv06xx_sensor.h rename to drivers/media/usb/gspca/stv06xx/stv06xx_sensor.h diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/drivers/media/usb/gspca/stv06xx/stv06xx_st6422.c similarity index 100% rename from drivers/media/video/gspca/stv06xx/stv06xx_st6422.c rename to drivers/media/usb/gspca/stv06xx/stv06xx_st6422.c diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h b/drivers/media/usb/gspca/stv06xx/stv06xx_st6422.h similarity index 100% rename from drivers/media/video/gspca/stv06xx/stv06xx_st6422.h rename to drivers/media/usb/gspca/stv06xx/stv06xx_st6422.h diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c b/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c similarity index 100% rename from drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c rename to drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h b/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.h similarity index 100% rename from drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h rename to drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.h diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/usb/gspca/sunplus.c similarity index 100% rename from drivers/media/video/gspca/sunplus.c rename to drivers/media/usb/gspca/sunplus.c diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/usb/gspca/t613.c similarity index 100% rename from drivers/media/video/gspca/t613.c rename to drivers/media/usb/gspca/t613.c diff --git a/drivers/media/video/gspca/topro.c b/drivers/media/usb/gspca/topro.c similarity index 99% rename from drivers/media/video/gspca/topro.c rename to drivers/media/usb/gspca/topro.c index a6055246cb9d720c13dbd880c167a6aec94ba79c..4cb511ccc5f6ecbefadee9ef64de47f9fd75f3e2 100644 --- a/drivers/media/video/gspca/topro.c +++ b/drivers/media/usb/gspca/topro.c @@ -4806,7 +4806,7 @@ static void sd_set_streamparm(struct gspca_dev *gspca_dev, } static int sd_set_jcomp(struct gspca_dev *gspca_dev, - struct v4l2_jpegcompression *jcomp) + const struct v4l2_jpegcompression *jcomp) { struct sd *sd = (struct sd *) gspca_dev; diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/usb/gspca/tv8532.c similarity index 100% rename from drivers/media/video/gspca/tv8532.c rename to drivers/media/usb/gspca/tv8532.c diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/usb/gspca/vc032x.c similarity index 99% rename from drivers/media/video/gspca/vc032x.c rename to drivers/media/usb/gspca/vc032x.c index f21fd1677c388a383cea3583de2b7114bd460209..e50079503d9607fc33e107f2c56e079575f581a8 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/usb/gspca/vc032x.c @@ -2934,11 +2934,8 @@ static void reg_r(struct gspca_dev *gspca_dev, PDEBUG(D_USBI, "GET %02x 0001 %04x %02x", req, index, gspca_dev->usb_buf[0]); else - PDEBUG(D_USBI, "GET %02x 0001 %04x %02x %02x %02x", - req, index, - gspca_dev->usb_buf[0], - gspca_dev->usb_buf[1], - gspca_dev->usb_buf[2]); + PDEBUG(D_USBI, "GET %02x 0001 %04x %*ph", + req, index, 3, gspca_dev->usb_buf); #endif } diff --git a/drivers/media/video/gspca/vicam.c b/drivers/media/usb/gspca/vicam.c similarity index 94% rename from drivers/media/video/gspca/vicam.c rename to drivers/media/usb/gspca/vicam.c index b1a64b912666a000647ef28af79bf3d8f67475a6..d6890bc3719862e54c87af2fe6b1f60ba958997e 100644 --- a/drivers/media/video/gspca/vicam.c +++ b/drivers/media/usb/gspca/vicam.c @@ -110,7 +110,7 @@ static int vicam_set_camera_power(struct gspca_dev *gspca_dev, int state) } /* - * request and read a block of data - see warning on vicam_command. + * request and read a block of data */ static int vicam_read_frame(struct gspca_dev *gspca_dev, u8 *data, int size) { @@ -170,14 +170,13 @@ static int vicam_read_frame(struct gspca_dev *gspca_dev, u8 *data, int size) return 0; } -/* This function is called as a workqueue function and runs whenever the camera +/* + * This function is called as a workqueue function and runs whenever the camera * is streaming data. Because it is a workqueue function it is allowed to sleep * so we can use synchronous USB calls. To avoid possible collisions with other - * threads attempting to use the camera's USB interface we take the gspca - * usb_lock when performing USB operations. In practice the only thing we need - * to protect against is the usb_set_interface call that gspca makes during - * stream_off as the camera doesn't provide any controls that the user could try - * to change. + * threads attempting to use gspca_dev->usb_buf we take the usb_lock when + * performing USB operations using it. In practice we don't really need this + * as the cameras controls are only written from the workqueue. */ static void vicam_dostream(struct work_struct *work) { @@ -194,7 +193,7 @@ static void vicam_dostream(struct work_struct *work) goto exit; } - while (gspca_dev->dev && gspca_dev->streaming) { + while (gspca_dev->present && gspca_dev->streaming) { #ifdef CONFIG_PM if (gspca_dev->frozen) break; @@ -299,7 +298,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev) dev->work_thread = NULL; mutex_lock(&gspca_dev->usb_lock); - if (gspca_dev->dev) + if (gspca_dev->present) vicam_set_camera_power(gspca_dev, 0); } diff --git a/drivers/media/video/gspca/w996Xcf.c b/drivers/media/usb/gspca/w996Xcf.c similarity index 100% rename from drivers/media/video/gspca/w996Xcf.c rename to drivers/media/usb/gspca/w996Xcf.c diff --git a/drivers/media/video/gspca/xirlink_cit.c b/drivers/media/usb/gspca/xirlink_cit.c similarity index 99% rename from drivers/media/video/gspca/xirlink_cit.c rename to drivers/media/usb/gspca/xirlink_cit.c index 13b8d395d21072040c089f13a41090f117d8e55f..d4b23c9bf90c0dad4427091c91a92257d502d23b 100644 --- a/drivers/media/video/gspca/xirlink_cit.c +++ b/drivers/media/usb/gspca/xirlink_cit.c @@ -2697,9 +2697,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - /* We cannot use gspca_dev->present here as that is not set when - sd_init gets called and we get called from sd_init */ - if (!gspca_dev->dev) + if (!gspca_dev->present) return; switch (sd->model) { diff --git a/drivers/media/video/gspca/zc3xx-reg.h b/drivers/media/usb/gspca/zc3xx-reg.h similarity index 100% rename from drivers/media/video/gspca/zc3xx-reg.h rename to drivers/media/usb/gspca/zc3xx-reg.h diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/usb/gspca/zc3xx.c similarity index 99% rename from drivers/media/video/gspca/zc3xx.c rename to drivers/media/usb/gspca/zc3xx.c index f0bacee33ef9a4e22c7876030c026468336df1d8..77c57755e7b4623a07c81b2324fb20f291ee1dc0 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/usb/gspca/zc3xx.c @@ -5945,12 +5945,13 @@ static void transfer_update(struct work_struct *work) for (;;) { msleep(100); + /* To protect gspca_dev->usb_buf and gspca_dev->usb_err */ mutex_lock(&gspca_dev->usb_lock); #ifdef CONFIG_PM if (gspca_dev->frozen) goto err; #endif - if (!gspca_dev->dev || !gspca_dev->streaming) + if (!gspca_dev->present || !gspca_dev->streaming) goto err; /* Bit 0 of register 11 indicates FIFO overflow */ @@ -6831,7 +6832,8 @@ static int sd_start(struct gspca_dev *gspca_dev) return 0; } -/* called on streamoff with alt 0 and on disconnect */ +/* called on streamoff with alt==0 and on disconnect */ +/* the usb_lock is held at entry - restore on exit */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -6842,7 +6844,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev) mutex_lock(&gspca_dev->usb_lock); sd->work_thread = NULL; } - if (!gspca_dev->dev) + if (!gspca_dev->present) return; send_unknown(gspca_dev, sd->sensor); } @@ -6881,16 +6883,11 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, } static int sd_set_jcomp(struct gspca_dev *gspca_dev, - struct v4l2_jpegcompression *jcomp) + const struct v4l2_jpegcompression *jcomp) { struct sd *sd = (struct sd *) gspca_dev; - int ret; - ret = v4l2_ctrl_s_ctrl(sd->jpegqual, jcomp->quality); - if (ret) - return ret; - jcomp->quality = v4l2_ctrl_g_ctrl(sd->jpegqual); - return 0; + return v4l2_ctrl_s_ctrl(sd->jpegqual, jcomp->quality); } static int sd_get_jcomp(struct gspca_dev *gspca_dev, diff --git a/drivers/media/video/hdpvr/Kconfig b/drivers/media/usb/hdpvr/Kconfig similarity index 100% rename from drivers/media/video/hdpvr/Kconfig rename to drivers/media/usb/hdpvr/Kconfig diff --git a/drivers/media/video/hdpvr/Makefile b/drivers/media/usb/hdpvr/Makefile similarity index 81% rename from drivers/media/video/hdpvr/Makefile rename to drivers/media/usb/hdpvr/Makefile index 52f057f24e3944a174b134bc65921abb55b78070..9b8d1463c52636dd18814ca3b8f61b7463a306eb 100644 --- a/drivers/media/video/hdpvr/Makefile +++ b/drivers/media/usb/hdpvr/Makefile @@ -2,6 +2,6 @@ hdpvr-objs := hdpvr-control.o hdpvr-core.o hdpvr-video.o hdpvr-i2c.o obj-$(CONFIG_VIDEO_HDPVR) += hdpvr.o -ccflags-y += -Idrivers/media/video +ccflags-y += -Idrivers/media/i2c ccflags-y += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/video/hdpvr/hdpvr-control.c b/drivers/media/usb/hdpvr/hdpvr-control.c similarity index 100% rename from drivers/media/video/hdpvr/hdpvr-control.c rename to drivers/media/usb/hdpvr/hdpvr-control.c diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/usb/hdpvr/hdpvr-core.c similarity index 100% rename from drivers/media/video/hdpvr/hdpvr-core.c rename to drivers/media/usb/hdpvr/hdpvr-core.c diff --git a/drivers/media/video/hdpvr/hdpvr-i2c.c b/drivers/media/usb/hdpvr/hdpvr-i2c.c similarity index 100% rename from drivers/media/video/hdpvr/hdpvr-i2c.c rename to drivers/media/usb/hdpvr/hdpvr-i2c.c diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c similarity index 99% rename from drivers/media/video/hdpvr/hdpvr-video.c rename to drivers/media/usb/hdpvr/hdpvr-video.c index 0e9e156bb2aa16c4bfa9e5a38fe4fa6053583383..da6b77912222421dffd5d808c4885c27d5647246 100644 --- a/drivers/media/video/hdpvr/hdpvr-video.c +++ b/drivers/media/usb/hdpvr/hdpvr-video.c @@ -677,7 +677,7 @@ static int vidioc_enumaudio(struct file *file, void *priv, } static int vidioc_s_audio(struct file *file, void *private_data, - struct v4l2_audio *audio) + const struct v4l2_audio *audio) { struct hdpvr_fh *fh = file->private_data; struct hdpvr_device *dev = fh->dev; diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/usb/hdpvr/hdpvr.h similarity index 100% rename from drivers/media/video/hdpvr/hdpvr.h rename to drivers/media/usb/hdpvr/hdpvr.h diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/usb/pvrusb2/Kconfig similarity index 82% rename from drivers/media/video/pvrusb2/Kconfig rename to drivers/media/usb/pvrusb2/Kconfig index 25e412ecad2cf7bfb05087f2b4f6639485627690..32b11c15bb1a03702dff1023114954c772e4a5cd 100644 --- a/drivers/media/video/pvrusb2/Kconfig +++ b/drivers/media/usb/pvrusb2/Kconfig @@ -36,13 +36,13 @@ config VIDEO_PVRUSB2_DVB bool "pvrusb2 ATSC/DVB support (EXPERIMENTAL)" default y depends on VIDEO_PVRUSB2 && DVB_CORE && EXPERIMENTAL - select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select DVB_S5H1409 if !DVB_FE_CUSTOMISE - select DVB_S5H1411 if !DVB_FE_CUSTOMISE - select DVB_TDA10048 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT ---help--- This option enables a DVB interface for the pvrusb2 driver. diff --git a/drivers/media/video/pvrusb2/Makefile b/drivers/media/usb/pvrusb2/Makefile similarity index 80% rename from drivers/media/video/pvrusb2/Makefile rename to drivers/media/usb/pvrusb2/Makefile index c17f37d964ad00460700abcc3a4105e3f84605d9..ad705547bdcedb7c448effb65cf35732317c4d3e 100644 --- a/drivers/media/video/pvrusb2/Makefile +++ b/drivers/media/usb/pvrusb2/Makefile @@ -16,7 +16,7 @@ pvrusb2-objs := pvrusb2-i2c-core.o \ obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2.o -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends diff --git a/drivers/media/video/pvrusb2/pvrusb2-audio.c b/drivers/media/usb/pvrusb2/pvrusb2-audio.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-audio.c rename to drivers/media/usb/pvrusb2/pvrusb2-audio.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-audio.h b/drivers/media/usb/pvrusb2/pvrusb2-audio.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-audio.h rename to drivers/media/usb/pvrusb2/pvrusb2-audio.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-context.c b/drivers/media/usb/pvrusb2/pvrusb2-context.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-context.c rename to drivers/media/usb/pvrusb2/pvrusb2-context.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-context.h b/drivers/media/usb/pvrusb2/pvrusb2-context.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-context.h rename to drivers/media/usb/pvrusb2/pvrusb2-context.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c b/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c rename to drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.h b/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-cs53l32a.h rename to drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/usb/pvrusb2/pvrusb2-ctrl.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-ctrl.c rename to drivers/media/usb/pvrusb2/pvrusb2-ctrl.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.h b/drivers/media/usb/pvrusb2/pvrusb2-ctrl.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-ctrl.h rename to drivers/media/usb/pvrusb2/pvrusb2-ctrl.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c rename to drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.h b/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.h rename to drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-debug.h b/drivers/media/usb/pvrusb2/pvrusb2-debug.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-debug.h rename to drivers/media/usb/pvrusb2/pvrusb2-debug.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-debugifc.c b/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-debugifc.c rename to drivers/media/usb/pvrusb2/pvrusb2-debugifc.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-debugifc.h b/drivers/media/usb/pvrusb2/pvrusb2-debugifc.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-debugifc.h rename to drivers/media/usb/pvrusb2/pvrusb2-debugifc.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/usb/pvrusb2/pvrusb2-devattr.c similarity index 97% rename from drivers/media/video/pvrusb2/pvrusb2-devattr.c rename to drivers/media/usb/pvrusb2/pvrusb2-devattr.c index d8c898278e8ca9b2a40c0db69dfe1c139d82e5ef..adc501d3c287fe0f6ba8893abd58d06603440873 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-devattr.c @@ -54,8 +54,9 @@ static const struct pvr2_device_client_desc pvr2_cli_29xxx[] = { { .module_id = PVR2_CLIENT_ID_DEMOD }, }; +#define PVR2_FIRMWARE_29xxx "v4l-pvrusb2-29xxx-01.fw" static const char *pvr2_fw1_names_29xxx[] = { - "v4l-pvrusb2-29xxx-01.fw", + PVR2_FIRMWARE_29xxx, }; static const struct pvr2_device_desc pvr2_device_29xxx = { @@ -87,8 +88,9 @@ static const struct pvr2_device_client_desc pvr2_cli_24xxx[] = { { .module_id = PVR2_CLIENT_ID_DEMOD }, }; +#define PVR2_FIRMWARE_24xxx "v4l-pvrusb2-24xxx-01.fw" static const char *pvr2_fw1_names_24xxx[] = { - "v4l-pvrusb2-24xxx-01.fw", + PVR2_FIRMWARE_24xxx, }; static const struct pvr2_device_desc pvr2_device_24xxx = { @@ -369,8 +371,9 @@ static const struct pvr2_device_client_desc pvr2_cli_73xxx[] = { .i2c_address_list = "\x42"}, }; +#define PVR2_FIRMWARE_73xxx "v4l-pvrusb2-73xxx-01.fw" static const char *pvr2_fw1_names_73xxx[] = { - "v4l-pvrusb2-73xxx-01.fw", + PVR2_FIRMWARE_73xxx, }; static const struct pvr2_device_desc pvr2_device_73xxx = { @@ -475,8 +478,9 @@ static const struct pvr2_dvb_props pvr2_751xx_dvb_props = { }; #endif +#define PVR2_FIRMWARE_75xxx "v4l-pvrusb2-73xxx-01.fw" static const char *pvr2_fw1_names_75xxx[] = { - "v4l-pvrusb2-73xxx-01.fw", + PVR2_FIRMWARE_75xxx, }; static const struct pvr2_device_desc pvr2_device_750xx = { @@ -556,7 +560,10 @@ struct usb_device_id pvr2_device_table[] = { }; MODULE_DEVICE_TABLE(usb, pvr2_device_table); - +MODULE_FIRMWARE(PVR2_FIRMWARE_29xxx); +MODULE_FIRMWARE(PVR2_FIRMWARE_24xxx); +MODULE_FIRMWARE(PVR2_FIRMWARE_73xxx); +MODULE_FIRMWARE(PVR2_FIRMWARE_75xxx); /* Stuff for Emacs to see, in order to encourage consistent editing style: diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/usb/pvrusb2/pvrusb2-devattr.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-devattr.h rename to drivers/media/usb/pvrusb2/pvrusb2-devattr.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-dvb.c b/drivers/media/usb/pvrusb2/pvrusb2-dvb.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-dvb.c rename to drivers/media/usb/pvrusb2/pvrusb2-dvb.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-dvb.h b/drivers/media/usb/pvrusb2/pvrusb2-dvb.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-dvb.h rename to drivers/media/usb/pvrusb2/pvrusb2-dvb.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-eeprom.c b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-eeprom.c rename to drivers/media/usb/pvrusb2/pvrusb2-eeprom.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-eeprom.h b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-eeprom.h rename to drivers/media/usb/pvrusb2/pvrusb2-eeprom.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/usb/pvrusb2/pvrusb2-encoder.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-encoder.c rename to drivers/media/usb/pvrusb2/pvrusb2-encoder.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.h b/drivers/media/usb/pvrusb2/pvrusb2-encoder.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-encoder.h rename to drivers/media/usb/pvrusb2/pvrusb2-encoder.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h b/drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h rename to drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h rename to drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-hdw.c rename to drivers/media/usb/pvrusb2/pvrusb2-hdw.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-hdw.h rename to drivers/media/usb/pvrusb2/pvrusb2-hdw.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-i2c-core.c rename to drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.h b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-i2c-core.h rename to drivers/media/usb/pvrusb2/pvrusb2-i2c-core.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.c b/drivers/media/usb/pvrusb2/pvrusb2-io.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-io.c rename to drivers/media/usb/pvrusb2/pvrusb2-io.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.h b/drivers/media/usb/pvrusb2/pvrusb2-io.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-io.h rename to drivers/media/usb/pvrusb2/pvrusb2-io.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-ioread.c b/drivers/media/usb/pvrusb2/pvrusb2-ioread.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-ioread.c rename to drivers/media/usb/pvrusb2/pvrusb2-ioread.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-ioread.h b/drivers/media/usb/pvrusb2/pvrusb2-ioread.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-ioread.h rename to drivers/media/usb/pvrusb2/pvrusb2-ioread.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/usb/pvrusb2/pvrusb2-main.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-main.c rename to drivers/media/usb/pvrusb2/pvrusb2-main.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-std.c b/drivers/media/usb/pvrusb2/pvrusb2-std.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-std.c rename to drivers/media/usb/pvrusb2/pvrusb2-std.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-std.h b/drivers/media/usb/pvrusb2/pvrusb2-std.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-std.h rename to drivers/media/usb/pvrusb2/pvrusb2-std.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/usb/pvrusb2/pvrusb2-sysfs.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-sysfs.c rename to drivers/media/usb/pvrusb2/pvrusb2-sysfs.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.h b/drivers/media/usb/pvrusb2/pvrusb2-sysfs.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-sysfs.h rename to drivers/media/usb/pvrusb2/pvrusb2-sysfs.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-util.h b/drivers/media/usb/pvrusb2/pvrusb2-util.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-util.h rename to drivers/media/usb/pvrusb2/pvrusb2-util.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c similarity index 99% rename from drivers/media/video/pvrusb2/pvrusb2-v4l2.c rename to drivers/media/usb/pvrusb2/pvrusb2-v4l2.c index f344aed32a936cdcfcfd93c45c4ae377c79bdb7d..db249cad3cd975f1be344057d5d6cab7fda344f6 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c @@ -333,7 +333,7 @@ static int pvr2_g_audio(struct file *file, void *priv, struct v4l2_audio *vin) return 0; } -static int pvr2_s_audio(struct file *file, void *priv, struct v4l2_audio *vout) +static int pvr2_s_audio(struct file *file, void *priv, const struct v4l2_audio *vout) { if (vout->index) return -EINVAL; @@ -760,7 +760,7 @@ static int pvr2_g_crop(struct file *file, void *priv, struct v4l2_crop *crop) return 0; } -static int pvr2_s_crop(struct file *file, void *priv, struct v4l2_crop *crop) +static int pvr2_s_crop(struct file *file, void *priv, const struct v4l2_crop *crop) { struct pvr2_v4l2_fh *fh = file->private_data; struct pvr2_hdw *hdw = fh->channel.mc_head->hdw; diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.h b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-v4l2.h rename to drivers/media/usb/pvrusb2/pvrusb2-v4l2.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-video-v4l.c rename to drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.h b/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-video-v4l.h rename to drivers/media/usb/pvrusb2/pvrusb2-video-v4l.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-wm8775.c b/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-wm8775.c rename to drivers/media/usb/pvrusb2/pvrusb2-wm8775.c diff --git a/drivers/media/video/pvrusb2/pvrusb2-wm8775.h b/drivers/media/usb/pvrusb2/pvrusb2-wm8775.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2-wm8775.h rename to drivers/media/usb/pvrusb2/pvrusb2-wm8775.h diff --git a/drivers/media/video/pvrusb2/pvrusb2.h b/drivers/media/usb/pvrusb2/pvrusb2.h similarity index 100% rename from drivers/media/video/pvrusb2/pvrusb2.h rename to drivers/media/usb/pvrusb2/pvrusb2.h diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/usb/pwc/Kconfig similarity index 100% rename from drivers/media/video/pwc/Kconfig rename to drivers/media/usb/pwc/Kconfig diff --git a/drivers/media/video/pwc/Makefile b/drivers/media/usb/pwc/Makefile similarity index 60% rename from drivers/media/video/pwc/Makefile rename to drivers/media/usb/pwc/Makefile index f5c8ec261e87d1cf64412c6bfbaf31529ceeb82c..d7fdbcb9edd301c32c5bf8f92eee7429a12d1c44 100644 --- a/drivers/media/video/pwc/Makefile +++ b/drivers/media/usb/pwc/Makefile @@ -1,4 +1,4 @@ -pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-v4l.o pwc-uncompress.o +pwc-objs += pwc-if.o pwc-misc.o pwc-ctrl.o pwc-v4l.o pwc-uncompress.o pwc-objs += pwc-dec1.o pwc-dec23.o pwc-kiara.o pwc-timon.o obj-$(CONFIG_USB_PWC) += pwc.o diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/usb/pwc/philips.txt similarity index 100% rename from drivers/media/video/pwc/philips.txt rename to drivers/media/usb/pwc/philips.txt diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/usb/pwc/pwc-ctrl.c similarity index 100% rename from drivers/media/video/pwc/pwc-ctrl.c rename to drivers/media/usb/pwc/pwc-ctrl.c diff --git a/drivers/media/video/pwc/pwc-dec1.c b/drivers/media/usb/pwc/pwc-dec1.c similarity index 100% rename from drivers/media/video/pwc/pwc-dec1.c rename to drivers/media/usb/pwc/pwc-dec1.c diff --git a/drivers/media/video/pwc/pwc-dec1.h b/drivers/media/usb/pwc/pwc-dec1.h similarity index 100% rename from drivers/media/video/pwc/pwc-dec1.h rename to drivers/media/usb/pwc/pwc-dec1.h diff --git a/drivers/media/video/pwc/pwc-dec23.c b/drivers/media/usb/pwc/pwc-dec23.c similarity index 100% rename from drivers/media/video/pwc/pwc-dec23.c rename to drivers/media/usb/pwc/pwc-dec23.c diff --git a/drivers/media/video/pwc/pwc-dec23.h b/drivers/media/usb/pwc/pwc-dec23.h similarity index 100% rename from drivers/media/video/pwc/pwc-dec23.h rename to drivers/media/usb/pwc/pwc-dec23.h diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c similarity index 99% rename from drivers/media/video/pwc/pwc-if.c rename to drivers/media/usb/pwc/pwc-if.c index de7c7ba99ef494bd60bf9ae659c0d1e72b80608b..42e36bac4d72a93add64b485652fc957bf0a30a3 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/usb/pwc/pwc-if.c @@ -994,7 +994,6 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id pdev->power_save = my_power_save; /* Init videobuf2 queue structure */ - memset(&pdev->vb_queue, 0, sizeof(pdev->vb_queue)); pdev->vb_queue.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; pdev->vb_queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; pdev->vb_queue.drv_priv = pdev; @@ -1127,7 +1126,7 @@ static void usb_pwc_disconnect(struct usb_interface *intf) v4l2_device_disconnect(&pdev->v4l2_dev); video_unregister_device(&pdev->vdev); mutex_unlock(&pdev->v4l2_lock); - mutex_unlock(pdev->vb_queue.lock); + mutex_unlock(&pdev->vb_queue_lock); #ifdef CONFIG_USB_PWC_INPUT_EVDEV if (pdev->button_dev) diff --git a/drivers/media/video/pwc/pwc-kiara.c b/drivers/media/usb/pwc/pwc-kiara.c similarity index 100% rename from drivers/media/video/pwc/pwc-kiara.c rename to drivers/media/usb/pwc/pwc-kiara.c diff --git a/drivers/media/video/pwc/pwc-kiara.h b/drivers/media/usb/pwc/pwc-kiara.h similarity index 100% rename from drivers/media/video/pwc/pwc-kiara.h rename to drivers/media/usb/pwc/pwc-kiara.h diff --git a/drivers/media/video/pwc/pwc-misc.c b/drivers/media/usb/pwc/pwc-misc.c similarity index 100% rename from drivers/media/video/pwc/pwc-misc.c rename to drivers/media/usb/pwc/pwc-misc.c diff --git a/drivers/media/video/pwc/pwc-nala.h b/drivers/media/usb/pwc/pwc-nala.h similarity index 100% rename from drivers/media/video/pwc/pwc-nala.h rename to drivers/media/usb/pwc/pwc-nala.h diff --git a/drivers/media/video/pwc/pwc-timon.c b/drivers/media/usb/pwc/pwc-timon.c similarity index 100% rename from drivers/media/video/pwc/pwc-timon.c rename to drivers/media/usb/pwc/pwc-timon.c diff --git a/drivers/media/video/pwc/pwc-timon.h b/drivers/media/usb/pwc/pwc-timon.h similarity index 100% rename from drivers/media/video/pwc/pwc-timon.h rename to drivers/media/usb/pwc/pwc-timon.h diff --git a/drivers/media/video/pwc/pwc-uncompress.c b/drivers/media/usb/pwc/pwc-uncompress.c similarity index 100% rename from drivers/media/video/pwc/pwc-uncompress.c rename to drivers/media/usb/pwc/pwc-uncompress.c diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/usb/pwc/pwc-v4l.c similarity index 100% rename from drivers/media/video/pwc/pwc-v4l.c rename to drivers/media/usb/pwc/pwc-v4l.c diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/usb/pwc/pwc.h similarity index 100% rename from drivers/media/video/pwc/pwc.h rename to drivers/media/usb/pwc/pwc.h diff --git a/drivers/media/usb/s2255/Kconfig b/drivers/media/usb/s2255/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..7e8ee1f864ab7fd561b8a5a1d2d7fc75a3957c2a --- /dev/null +++ b/drivers/media/usb/s2255/Kconfig @@ -0,0 +1,9 @@ +config USB_S2255 + tristate "USB Sensoray 2255 video capture device" + depends on VIDEO_V4L2 + select VIDEOBUF_VMALLOC + default n + help + Say Y here if you want support for the Sensoray 2255 USB device. + This driver can be compiled as a module, called s2255drv. + diff --git a/drivers/media/usb/s2255/Makefile b/drivers/media/usb/s2255/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..197d0bb2adfd5a0cd3935a1c461a203109813020 --- /dev/null +++ b/drivers/media/usb/s2255/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_USB_S2255) += s2255drv.o + diff --git a/drivers/media/video/s2255drv.c b/drivers/media/usb/s2255/s2255drv.c similarity index 99% rename from drivers/media/video/s2255drv.c rename to drivers/media/usb/s2255/s2255drv.c index 95007dda0c93e8ed8a2395d0dd63ba05f3064583..2191f6ddf9e7536883a6b7e7973ceeba30b0ef61 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/usb/s2255/s2255drv.c @@ -258,7 +258,6 @@ struct s2255_dev { atomic_t num_channels; int frames; struct mutex lock; /* channels[].vdev.lock */ - struct mutex open_lock; struct usb_device *udev; struct usb_interface *interface; u8 read_endpoint; @@ -1557,7 +1556,7 @@ static int vidioc_g_jpegcomp(struct file *file, void *priv, } static int vidioc_s_jpegcomp(struct file *file, void *priv, - struct v4l2_jpegcompression *jc) + const struct v4l2_jpegcompression *jc) { struct s2255_fh *fh = priv; struct s2255_channel *channel = fh->channel; @@ -1684,7 +1683,7 @@ static int vidioc_enum_frameintervals(struct file *file, void *priv, return 0; } -static int s2255_open(struct file *file) +static int __s2255_open(struct file *file) { struct video_device *vdev = video_devdata(file); struct s2255_channel *channel = video_drvdata(file); @@ -1694,16 +1693,9 @@ static int s2255_open(struct file *file) int state; dprintk(1, "s2255: open called (dev=%s)\n", video_device_node_name(vdev)); - /* - * open lock necessary to prevent multiple instances - * of v4l-conf (or other programs) from simultaneously - * reloading firmware. - */ - mutex_lock(&dev->open_lock); state = atomic_read(&dev->fw_data->fw_state); switch (state) { case S2255_FW_DISCONNECTING: - mutex_unlock(&dev->open_lock); return -ENODEV; case S2255_FW_FAILED: s2255_dev_err(&dev->udev->dev, @@ -1742,11 +1734,9 @@ static int s2255_open(struct file *file) break; case S2255_FW_FAILED: printk(KERN_INFO "2255 firmware load failed.\n"); - mutex_unlock(&dev->open_lock); return -ENODEV; case S2255_FW_DISCONNECTING: printk(KERN_INFO "%s: disconnecting\n", __func__); - mutex_unlock(&dev->open_lock); return -ENODEV; case S2255_FW_LOADED_DSPWAIT: case S2255_FW_NOTLOADED: @@ -1760,14 +1750,11 @@ static int s2255_open(struct file *file) */ atomic_set(&dev->fw_data->fw_state, S2255_FW_FAILED); - mutex_unlock(&dev->open_lock); return -EAGAIN; default: printk(KERN_INFO "%s: unknown state\n", __func__); - mutex_unlock(&dev->open_lock); return -EFAULT; } - mutex_unlock(&dev->open_lock); /* allocate + initialize per filehandle data */ fh = kzalloc(sizeof(*fh), GFP_KERNEL); if (NULL == fh) @@ -1798,16 +1785,30 @@ static int s2255_open(struct file *file) return 0; } +static int s2255_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + int ret; + + if (mutex_lock_interruptible(vdev->lock)) + return -ERESTARTSYS; + ret = __s2255_open(file); + mutex_unlock(vdev->lock); + return ret; +} static unsigned int s2255_poll(struct file *file, struct poll_table_struct *wait) { struct s2255_fh *fh = file->private_data; + struct s2255_dev *dev = fh->dev; int rc; dprintk(100, "%s\n", __func__); if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) return POLLERR; + mutex_lock(&dev->lock); rc = videobuf_poll_stream(file, &fh->vb_vidq, wait); + mutex_unlock(&dev->lock); return rc; } @@ -1827,7 +1828,6 @@ static void s2255_destroy(struct s2255_dev *dev) kfree(dev->fw_data); /* reset the DSP so firmware can be reloaded next time */ s2255_reset_dsppower(dev); - mutex_destroy(&dev->open_lock); mutex_destroy(&dev->lock); usb_put_dev(dev->udev); v4l2_device_unregister(&dev->v4l2_dev); @@ -1843,6 +1843,7 @@ static int s2255_release(struct file *file) struct s2255_channel *channel = fh->channel; if (!dev) return -ENODEV; + mutex_lock(&dev->lock); /* turn off stream */ if (res_check(fh)) { if (channel->b_acquire) @@ -1851,6 +1852,7 @@ static int s2255_release(struct file *file) res_free(fh); } videobuf_mmap_free(&fh->vb_vidq); + mutex_unlock(&dev->lock); dprintk(1, "%s (dev=%s)\n", __func__, video_device_node_name(vdev)); kfree(fh); return 0; @@ -1859,12 +1861,17 @@ static int s2255_release(struct file *file) static int s2255_mmap_v4l(struct file *file, struct vm_area_struct *vma) { struct s2255_fh *fh = file->private_data; + struct s2255_dev *dev; int ret; if (!fh) return -ENODEV; + dev = fh->dev; dprintk(4, "%s, vma=0x%08lx\n", __func__, (unsigned long)vma); + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; ret = videobuf_mmap_mapper(&fh->vb_vidq, vma); + mutex_unlock(&dev->lock); dprintk(4, "%s vma start=0x%08lx, size=%ld, ret=%d\n", __func__, (unsigned long)vma->vm_start, (unsigned long)vma->vm_end - (unsigned long)vma->vm_start, ret); @@ -1944,10 +1951,6 @@ static int s2255_probe_v4l(struct s2255_dev *dev) /* register 4 video devices */ channel->vdev = template; channel->vdev.lock = &dev->lock; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &channel->vdev.flags); channel->vdev.v4l2_dev = &dev->v4l2_dev; video_set_drvdata(&channel->vdev, channel); if (video_nr == -1) @@ -2535,7 +2538,6 @@ static int s2255_probe(struct usb_interface *interface, if (!dev->fw_data) goto errorFWDATA1; mutex_init(&dev->lock); - mutex_init(&dev->open_lock); /* grab usb_device and save it */ dev->udev = usb_get_dev(interface_to_usbdev(interface)); if (dev->udev == NULL) { @@ -2637,7 +2639,6 @@ static int s2255_probe(struct usb_interface *interface, usb_put_dev(dev->udev); errorUDEV: kfree(dev->fw_data); - mutex_destroy(&dev->open_lock); mutex_destroy(&dev->lock); errorFWDATA1: kfree(dev); diff --git a/drivers/media/usb/siano/Kconfig b/drivers/media/usb/siano/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..3c76e62d820da4ac3ccffe8f8f4cbe6b3229451d --- /dev/null +++ b/drivers/media/usb/siano/Kconfig @@ -0,0 +1,10 @@ +# +# Siano Mobile Silicon Digital TV device configuration +# + +config SMS_USB_DRV + tristate "Siano SMS1xxx based MDTV receiver" + depends on DVB_CORE && RC_CORE && HAS_DMA + ---help--- + Choose if you would like to have Siano's support for USB interface + diff --git a/drivers/media/usb/siano/Makefile b/drivers/media/usb/siano/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..758b6a090c5955c86d84d01e902b666fa86cf21b --- /dev/null +++ b/drivers/media/usb/siano/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_SMS_USB_DRV) += smsusb.o + +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/common/siano +ccflags-y += $(extra-cflags-y) $(extra-cflags-m) + diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/usb/siano/smsusb.c similarity index 99% rename from drivers/media/dvb/siano/smsusb.c rename to drivers/media/usb/siano/smsusb.c index 664e460f247b5a7d1d53629959da7705fb259aa1..aac622200e99a9e244523b8ead9994d510cac891 100644 --- a/drivers/media/dvb/siano/smsusb.c +++ b/drivers/media/usb/siano/smsusb.c @@ -481,7 +481,7 @@ static int smsusb_resume(struct usb_interface *intf) return 0; } -static const struct usb_device_id smsusb_id_table[] __devinitconst = { +static const struct usb_device_id smsusb_id_table[] = { { USB_DEVICE(0x187f, 0x0010), .driver_info = SMS1XXX_BOARD_SIANO_STELLAR }, { USB_DEVICE(0x187f, 0x0100), diff --git a/drivers/media/video/sn9c102/Kconfig b/drivers/media/usb/sn9c102/Kconfig similarity index 100% rename from drivers/media/video/sn9c102/Kconfig rename to drivers/media/usb/sn9c102/Kconfig diff --git a/drivers/media/video/sn9c102/Makefile b/drivers/media/usb/sn9c102/Makefile similarity index 100% rename from drivers/media/video/sn9c102/Makefile rename to drivers/media/usb/sn9c102/Makefile diff --git a/drivers/media/video/sn9c102/sn9c102.h b/drivers/media/usb/sn9c102/sn9c102.h similarity index 100% rename from drivers/media/video/sn9c102/sn9c102.h rename to drivers/media/usb/sn9c102/sn9c102.h diff --git a/drivers/media/video/sn9c102/sn9c102_config.h b/drivers/media/usb/sn9c102/sn9c102_config.h similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_config.h rename to drivers/media/usb/sn9c102/sn9c102_config.h diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/usb/sn9c102/sn9c102_core.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_core.c rename to drivers/media/usb/sn9c102/sn9c102_core.c diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/usb/sn9c102/sn9c102_devtable.h similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_devtable.h rename to drivers/media/usb/sn9c102/sn9c102_devtable.h diff --git a/drivers/media/video/sn9c102/sn9c102_hv7131d.c b/drivers/media/usb/sn9c102/sn9c102_hv7131d.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_hv7131d.c rename to drivers/media/usb/sn9c102/sn9c102_hv7131d.c diff --git a/drivers/media/video/sn9c102/sn9c102_hv7131r.c b/drivers/media/usb/sn9c102/sn9c102_hv7131r.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_hv7131r.c rename to drivers/media/usb/sn9c102/sn9c102_hv7131r.c diff --git a/drivers/media/video/sn9c102/sn9c102_mi0343.c b/drivers/media/usb/sn9c102/sn9c102_mi0343.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_mi0343.c rename to drivers/media/usb/sn9c102/sn9c102_mi0343.c diff --git a/drivers/media/video/sn9c102/sn9c102_mi0360.c b/drivers/media/usb/sn9c102/sn9c102_mi0360.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_mi0360.c rename to drivers/media/usb/sn9c102/sn9c102_mi0360.c diff --git a/drivers/media/video/sn9c102/sn9c102_mt9v111.c b/drivers/media/usb/sn9c102/sn9c102_mt9v111.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_mt9v111.c rename to drivers/media/usb/sn9c102/sn9c102_mt9v111.c diff --git a/drivers/media/video/sn9c102/sn9c102_ov7630.c b/drivers/media/usb/sn9c102/sn9c102_ov7630.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_ov7630.c rename to drivers/media/usb/sn9c102/sn9c102_ov7630.c diff --git a/drivers/media/video/sn9c102/sn9c102_ov7660.c b/drivers/media/usb/sn9c102/sn9c102_ov7660.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_ov7660.c rename to drivers/media/usb/sn9c102/sn9c102_ov7660.c diff --git a/drivers/media/video/sn9c102/sn9c102_pas106b.c b/drivers/media/usb/sn9c102/sn9c102_pas106b.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_pas106b.c rename to drivers/media/usb/sn9c102/sn9c102_pas106b.c diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/usb/sn9c102/sn9c102_pas202bcb.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_pas202bcb.c rename to drivers/media/usb/sn9c102/sn9c102_pas202bcb.c diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/usb/sn9c102/sn9c102_sensor.h similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_sensor.h rename to drivers/media/usb/sn9c102/sn9c102_sensor.h diff --git a/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c b/drivers/media/usb/sn9c102/sn9c102_tas5110c1b.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_tas5110c1b.c rename to drivers/media/usb/sn9c102/sn9c102_tas5110c1b.c diff --git a/drivers/media/video/sn9c102/sn9c102_tas5110d.c b/drivers/media/usb/sn9c102/sn9c102_tas5110d.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_tas5110d.c rename to drivers/media/usb/sn9c102/sn9c102_tas5110d.c diff --git a/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c b/drivers/media/usb/sn9c102/sn9c102_tas5130d1b.c similarity index 100% rename from drivers/media/video/sn9c102/sn9c102_tas5130d1b.c rename to drivers/media/usb/sn9c102/sn9c102_tas5130d1b.c diff --git a/drivers/media/usb/stk1160/Kconfig b/drivers/media/usb/stk1160/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..1c3a1ec00237c4b6b2e2f3d10a2e7205d6d853fc --- /dev/null +++ b/drivers/media/usb/stk1160/Kconfig @@ -0,0 +1,20 @@ +config VIDEO_STK1160 + tristate "STK1160 USB video capture support" + depends on VIDEO_DEV && I2C + select VIDEOBUF2_VMALLOC + select VIDEO_SAA711X + + ---help--- + This is a video4linux driver for STK1160 based video capture devices. + + To compile this driver as a module, choose M here: the + module will be called stk1160 + +config VIDEO_STK1160_AC97 + bool "STK1160 AC97 codec support" + depends on VIDEO_STK1160 && SND + select SND_AC97_CODEC + + ---help--- + Enables AC97 codec support for stk1160 driver. +. diff --git a/drivers/media/usb/stk1160/Makefile b/drivers/media/usb/stk1160/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..dfe3e90ff392fb3e0e7b17f30dc3bf58180e408e --- /dev/null +++ b/drivers/media/usb/stk1160/Makefile @@ -0,0 +1,11 @@ +obj-stk1160-ac97-$(CONFIG_VIDEO_STK1160_AC97) := stk1160-ac97.o + +stk1160-y := stk1160-core.o \ + stk1160-v4l.o \ + stk1160-video.o \ + stk1160-i2c.o \ + $(obj-stk1160-ac97-y) + +obj-$(CONFIG_VIDEO_STK1160) += stk1160.o + +ccflags-y += -Idrivers/media/i2c diff --git a/drivers/media/usb/stk1160/stk1160-ac97.c b/drivers/media/usb/stk1160/stk1160-ac97.c new file mode 100644 index 0000000000000000000000000000000000000000..c8583c262c3d0b6f055cdf73a77e7d78037e2929 --- /dev/null +++ b/drivers/media/usb/stk1160/stk1160-ac97.c @@ -0,0 +1,152 @@ +/* + * STK1160 driver + * + * Copyright (C) 2012 Ezequiel Garcia + * + * + * Based on Easycap driver by R.M. Thomas + * Copyright (C) 2010 R.M. Thomas + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include + +#include "stk1160.h" +#include "stk1160-reg.h" + +static struct snd_ac97 *stk1160_ac97; + +static void stk1160_write_ac97(struct snd_ac97 *ac97, u16 reg, u16 value) +{ + struct stk1160 *dev = ac97->private_data; + + /* Set codec register address */ + stk1160_write_reg(dev, STK1160_AC97_ADDR, reg); + + /* Set codec command */ + stk1160_write_reg(dev, STK1160_AC97_CMD, value & 0xff); + stk1160_write_reg(dev, STK1160_AC97_CMD + 1, (value & 0xff00) >> 8); + + /* + * Set command write bit to initiate write operation. + * The bit will be cleared when transfer is done. + */ + stk1160_write_reg(dev, STK1160_AC97CTL_0, 0x8c); +} + +static u16 stk1160_read_ac97(struct snd_ac97 *ac97, u16 reg) +{ + struct stk1160 *dev = ac97->private_data; + u8 vall = 0; + u8 valh = 0; + + /* Set codec register address */ + stk1160_write_reg(dev, STK1160_AC97_ADDR, reg); + + /* + * Set command read bit to initiate read operation. + * The bit will be cleared when transfer is done. + */ + stk1160_write_reg(dev, STK1160_AC97CTL_0, 0x8b); + + /* Retrieve register value */ + stk1160_read_reg(dev, STK1160_AC97_CMD, &vall); + stk1160_read_reg(dev, STK1160_AC97_CMD + 1, &valh); + + return (valh << 8) | vall; +} + +static void stk1160_reset_ac97(struct snd_ac97 *ac97) +{ + struct stk1160 *dev = ac97->private_data; + /* Two-step reset AC97 interface and hardware codec */ + stk1160_write_reg(dev, STK1160_AC97CTL_0, 0x94); + stk1160_write_reg(dev, STK1160_AC97CTL_0, 0x88); + + /* Set 16-bit audio data and choose L&R channel*/ + stk1160_write_reg(dev, STK1160_AC97CTL_1 + 2, 0x01); +} + +static struct snd_ac97_bus_ops stk1160_ac97_ops = { + .read = stk1160_read_ac97, + .write = stk1160_write_ac97, + .reset = stk1160_reset_ac97, +}; + +int stk1160_ac97_register(struct stk1160 *dev) +{ + struct snd_card *card = NULL; + struct snd_ac97_bus *ac97_bus; + struct snd_ac97_template ac97_template; + int rc; + + /* + * Just want a card to access ac96 controls, + * the actual capture interface will be handled by snd-usb-audio + */ + rc = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, + THIS_MODULE, 0, &card); + if (rc < 0) + return rc; + + snd_card_set_dev(card, dev->dev); + + /* TODO: I'm not sure where should I get these names :-( */ + snprintf(card->shortname, sizeof(card->shortname), + "stk1160-mixer"); + snprintf(card->longname, sizeof(card->longname), + "stk1160 ac97 codec mixer control"); + strncpy(card->driver, dev->dev->driver->name, sizeof(card->driver)); + + rc = snd_ac97_bus(card, 0, &stk1160_ac97_ops, NULL, &ac97_bus); + if (rc) + goto err; + + /* We must set private_data before calling snd_ac97_mixer */ + memset(&ac97_template, 0, sizeof(ac97_template)); + ac97_template.private_data = dev; + ac97_template.scaps = AC97_SCAP_SKIP_MODEM; + rc = snd_ac97_mixer(ac97_bus, &ac97_template, &stk1160_ac97); + if (rc) + goto err; + + dev->snd_card = card; + rc = snd_card_register(card); + if (rc) + goto err; + + return 0; + +err: + dev->snd_card = NULL; + snd_card_free(card); + return rc; +} + +int stk1160_ac97_unregister(struct stk1160 *dev) +{ + struct snd_card *card = dev->snd_card; + + /* + * We need to check usb_device, + * because ac97 release attempts to communicate with codec + */ + if (card && dev->udev) + snd_card_free(card); + + return 0; +} diff --git a/drivers/media/usb/stk1160/stk1160-core.c b/drivers/media/usb/stk1160/stk1160-core.c new file mode 100644 index 0000000000000000000000000000000000000000..b62740846061d583bfed4d5c56365c7fb89586c9 --- /dev/null +++ b/drivers/media/usb/stk1160/stk1160-core.c @@ -0,0 +1,430 @@ +/* + * STK1160 driver + * + * Copyright (C) 2012 Ezequiel Garcia + * + * + * Based on Easycap driver by R.M. Thomas + * Copyright (C) 2010 R.M. Thomas + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * TODO: + * + * 1. (Try to) detect if we must register ac97 mixer + * 2. Support stream at lower speed: lower frame rate or lower frame size. + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "stk1160.h" +#include "stk1160-reg.h" + +static unsigned int input; +module_param(input, int, 0644); +MODULE_PARM_DESC(input, "Set default input"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ezequiel Garcia"); +MODULE_DESCRIPTION("STK1160 driver"); + +/* Devices supported by this driver */ +static struct usb_device_id stk1160_id_table[] = { + { USB_DEVICE(0x05e1, 0x0408) }, + { } +}; +MODULE_DEVICE_TABLE(usb, stk1160_id_table); + +/* saa7113 I2C address */ +static unsigned short saa7113_addrs[] = { + 0x4a >> 1, + I2C_CLIENT_END +}; + +/* + * Read/Write stk registers + */ +int stk1160_read_reg(struct stk1160 *dev, u16 reg, u8 *value) +{ + int ret; + int pipe = usb_rcvctrlpipe(dev->udev, 0); + + *value = 0; + ret = usb_control_msg(dev->udev, pipe, 0x00, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x00, reg, value, sizeof(u8), HZ); + if (ret < 0) { + stk1160_err("read failed on reg 0x%x (%d)\n", + reg, ret); + return ret; + } + + return 0; +} + +int stk1160_write_reg(struct stk1160 *dev, u16 reg, u16 value) +{ + int ret; + int pipe = usb_sndctrlpipe(dev->udev, 0); + + ret = usb_control_msg(dev->udev, pipe, 0x01, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, reg, NULL, 0, HZ); + if (ret < 0) { + stk1160_err("write failed on reg 0x%x (%d)\n", + reg, ret); + return ret; + } + + return 0; +} + +void stk1160_select_input(struct stk1160 *dev) +{ + static const u8 gctrl[] = { + 0x98, 0x90, 0x88, 0x80 + }; + + if (dev->ctl_input < ARRAY_SIZE(gctrl)) + stk1160_write_reg(dev, STK1160_GCTRL, gctrl[dev->ctl_input]); +} + +/* TODO: We should break this into pieces */ +static void stk1160_reg_reset(struct stk1160 *dev) +{ + int i; + + static const struct regval ctl[] = { + {STK1160_GCTRL+2, 0x0078}, + + {STK1160_RMCTL+1, 0x0000}, + {STK1160_RMCTL+3, 0x0002}, + + {STK1160_PLLSO, 0x0010}, + {STK1160_PLLSO+1, 0x0000}, + {STK1160_PLLSO+2, 0x0014}, + {STK1160_PLLSO+3, 0x000E}, + + {STK1160_PLLFD, 0x0046}, + + /* Timing generator setup */ + {STK1160_TIGEN, 0x0012}, + {STK1160_TICTL, 0x002D}, + {STK1160_TICTL+1, 0x0001}, + {STK1160_TICTL+2, 0x0000}, + {STK1160_TICTL+3, 0x0000}, + {STK1160_TIGEN, 0x0080}, + + {0xffff, 0xffff} + }; + + for (i = 0; ctl[i].reg != 0xffff; i++) + stk1160_write_reg(dev, ctl[i].reg, ctl[i].val); +} + +static void stk1160_release(struct v4l2_device *v4l2_dev) +{ + struct stk1160 *dev = container_of(v4l2_dev, struct stk1160, v4l2_dev); + + stk1160_info("releasing all resources\n"); + + stk1160_i2c_unregister(dev); + + v4l2_ctrl_handler_free(&dev->ctrl_handler); + v4l2_device_unregister(&dev->v4l2_dev); + kfree(dev->alt_max_pkt_size); + kfree(dev); +} + +/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ +#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) + +/* + * Scan usb interface and populate max_pkt_size array + * with information on each alternate setting. + * The array should be allocated by the caller. + */ +static int stk1160_scan_usb(struct usb_interface *intf, struct usb_device *udev, + unsigned int *max_pkt_size) +{ + int i, e, sizedescr, size, ifnum; + const struct usb_endpoint_descriptor *desc; + + bool has_video = false, has_audio = false; + const char *speed; + + ifnum = intf->altsetting[0].desc.bInterfaceNumber; + + /* Get endpoints */ + for (i = 0; i < intf->num_altsetting; i++) { + + for (e = 0; e < intf->altsetting[i].desc.bNumEndpoints; e++) { + + /* This isn't clear enough, at least to me */ + desc = &intf->altsetting[i].endpoint[e].desc; + sizedescr = le16_to_cpu(desc->wMaxPacketSize); + size = sizedescr & 0x7ff; + + if (udev->speed == USB_SPEED_HIGH) + size = size * hb_mult(sizedescr); + + if (usb_endpoint_xfer_isoc(desc) && + usb_endpoint_dir_in(desc)) { + switch (desc->bEndpointAddress) { + case STK1160_EP_AUDIO: + has_audio = true; + break; + case STK1160_EP_VIDEO: + has_video = true; + max_pkt_size[i] = size; + break; + } + } + } + } + + /* Is this even possible? */ + if (!(has_audio || has_video)) { + dev_err(&udev->dev, "no audio or video endpoints found\n"); + return -ENODEV; + } + + switch (udev->speed) { + case USB_SPEED_LOW: + speed = "1.5"; + break; + case USB_SPEED_FULL: + speed = "12"; + break; + case USB_SPEED_HIGH: + speed = "480"; + break; + default: + speed = "unknown"; + } + + dev_info(&udev->dev, "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n", + udev->manufacturer ? udev->manufacturer : "", + udev->product ? udev->product : "", + speed, + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + ifnum, + intf->altsetting->desc.bInterfaceNumber); + + /* This should never happen, since we rejected audio interfaces */ + if (has_audio) + dev_warn(&udev->dev, "audio interface %d found.\n\ + This is not implemented by this driver,\ + you should use snd-usb-audio instead\n", ifnum); + + if (has_video) + dev_info(&udev->dev, "video interface %d found\n", + ifnum); + + /* + * Make sure we have 480 Mbps of bandwidth, otherwise things like + * video stream wouldn't likely work, since 12 Mbps is generally + * not enough even for most streams. + */ + if (udev->speed != USB_SPEED_HIGH) + dev_warn(&udev->dev, "must be connected to a high-speed USB 2.0 port\n\ + You may not be able to stream video smoothly\n"); + + return 0; +} + +static int stk1160_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + int rc = 0; + + unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */ + struct usb_device *udev; + struct stk1160 *dev; + + udev = interface_to_usbdev(interface); + + /* + * Since usb audio class is supported by snd-usb-audio, + * we reject audio interface. + */ + if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) + return -ENODEV; + + /* Alloc an array for all possible max_pkt_size */ + alt_max_pkt_size = kmalloc(sizeof(alt_max_pkt_size[0]) * + interface->num_altsetting, GFP_KERNEL); + if (alt_max_pkt_size == NULL) + return -ENOMEM; + + /* + * Scan usb posibilities and populate alt_max_pkt_size array. + * Also, check if device speed is fast enough. + */ + rc = stk1160_scan_usb(interface, udev, alt_max_pkt_size); + if (rc < 0) { + kfree(alt_max_pkt_size); + return rc; + } + + dev = kzalloc(sizeof(struct stk1160), GFP_KERNEL); + if (dev == NULL) { + kfree(alt_max_pkt_size); + return -ENOMEM; + } + + dev->alt_max_pkt_size = alt_max_pkt_size; + dev->udev = udev; + dev->num_alt = interface->num_altsetting; + dev->ctl_input = input; + + /* We save struct device for debug purposes only */ + dev->dev = &interface->dev; + + usb_set_intfdata(interface, dev); + + /* initialize videobuf2 stuff */ + rc = stk1160_vb2_setup(dev); + if (rc < 0) + goto free_err; + + /* + * There is no need to take any locks here in probe + * because we register the device node as the *last* thing. + */ + spin_lock_init(&dev->buf_lock); + mutex_init(&dev->v4l_lock); + mutex_init(&dev->vb_queue_lock); + + rc = v4l2_ctrl_handler_init(&dev->ctrl_handler, 0); + if (rc) { + stk1160_err("v4l2_ctrl_handler_init failed (%d)\n", rc); + goto free_err; + } + + /* + * We obtain a v4l2_dev but defer + * registration of video device node as the last thing. + * There is no need to set the name if we give a device struct + */ + dev->v4l2_dev.release = stk1160_release; + dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler; + rc = v4l2_device_register(dev->dev, &dev->v4l2_dev); + if (rc) { + stk1160_err("v4l2_device_register failed (%d)\n", rc); + goto free_ctrl; + } + + rc = stk1160_i2c_register(dev); + if (rc < 0) + goto unreg_v4l2; + + /* + * To the best of my knowledge stk1160 boards only have + * saa7113, but it doesn't hurt to support them all. + */ + dev->sd_saa7115 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "saa7115_auto", 0, saa7113_addrs); + + stk1160_info("driver ver %s successfully loaded\n", + STK1160_VERSION); + + /* i2c reset saa711x */ + v4l2_device_call_all(&dev->v4l2_dev, 0, core, reset, 0); + v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing, + 0, 0, 0); + v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0); + + /* reset stk1160 to default values */ + stk1160_reg_reset(dev); + + /* select default input */ + stk1160_select_input(dev); + + stk1160_ac97_register(dev); + + rc = stk1160_video_register(dev); + if (rc < 0) + goto unreg_i2c; + + return 0; + +unreg_i2c: + stk1160_i2c_unregister(dev); +unreg_v4l2: + v4l2_device_unregister(&dev->v4l2_dev); +free_ctrl: + v4l2_ctrl_handler_free(&dev->ctrl_handler); +free_err: + kfree(alt_max_pkt_size); + kfree(dev); + + return rc; +} + +static void stk1160_disconnect(struct usb_interface *interface) +{ + struct stk1160 *dev; + + dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + /* + * Wait until all current v4l2 operation are finished + * then deallocate resources + */ + mutex_lock(&dev->vb_queue_lock); + mutex_lock(&dev->v4l_lock); + + /* Here is the only place where isoc get released */ + stk1160_uninit_isoc(dev); + + /* ac97 unregister needs to be done before usb_device is cleared */ + stk1160_ac97_unregister(dev); + + stk1160_clear_queue(dev); + + video_unregister_device(&dev->vdev); + v4l2_device_disconnect(&dev->v4l2_dev); + + /* This way current users can detect device is gone */ + dev->udev = NULL; + + mutex_unlock(&dev->v4l_lock); + mutex_unlock(&dev->vb_queue_lock); + + /* + * This calls stk1160_release if it's the last reference. + * therwise, release is posponed until there are no users left. + */ + v4l2_device_put(&dev->v4l2_dev); +} + +static struct usb_driver stk1160_usb_driver = { + .name = "stk1160", + .id_table = stk1160_id_table, + .probe = stk1160_probe, + .disconnect = stk1160_disconnect, +}; + +module_usb_driver(stk1160_usb_driver); diff --git a/drivers/media/usb/stk1160/stk1160-i2c.c b/drivers/media/usb/stk1160/stk1160-i2c.c new file mode 100644 index 0000000000000000000000000000000000000000..176ac937306be7e63b6362ae55f071adde7f00c0 --- /dev/null +++ b/drivers/media/usb/stk1160/stk1160-i2c.c @@ -0,0 +1,294 @@ +/* + * STK1160 driver + * + * Copyright (C) 2012 Ezequiel Garcia + * + * + * Based on Easycap driver by R.M. Thomas + * Copyright (C) 2010 R.M. Thomas + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include + +#include "stk1160.h" +#include "stk1160-reg.h" + +static unsigned int i2c_debug; +module_param(i2c_debug, int, 0644); +MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); + +#define dprintk_i2c(fmt, args...) \ +do { \ + if (i2c_debug) \ + printk(KERN_DEBUG fmt, ##args); \ +} while (0) + +static int stk1160_i2c_busy_wait(struct stk1160 *dev, u8 wait_bit_mask) +{ + unsigned long end; + u8 flag; + + /* Wait until read/write finish bit is set */ + end = jiffies + msecs_to_jiffies(STK1160_I2C_TIMEOUT); + while (time_is_after_jiffies(end)) { + + stk1160_read_reg(dev, STK1160_SICTL+1, &flag); + /* read/write done? */ + if (flag & wait_bit_mask) + goto done; + + usleep_range(10 * USEC_PER_MSEC, 20 * USEC_PER_MSEC); + } + + return -ETIMEDOUT; + +done: + return 0; +} + +static int stk1160_i2c_write_reg(struct stk1160 *dev, u8 addr, + u8 reg, u8 value) +{ + int rc; + + /* Set serial device address */ + rc = stk1160_write_reg(dev, STK1160_SICTL_SDA, addr); + if (rc < 0) + return rc; + + /* Set i2c device register sub-address */ + rc = stk1160_write_reg(dev, STK1160_SBUSW_WA, reg); + if (rc < 0) + return rc; + + /* Set i2c device register value */ + rc = stk1160_write_reg(dev, STK1160_SBUSW_WD, value); + if (rc < 0) + return rc; + + /* Start write now */ + rc = stk1160_write_reg(dev, STK1160_SICTL, 0x01); + if (rc < 0) + return rc; + + rc = stk1160_i2c_busy_wait(dev, 0x04); + if (rc < 0) + return rc; + + return 0; +} + +static int stk1160_i2c_read_reg(struct stk1160 *dev, u8 addr, + u8 reg, u8 *value) +{ + int rc; + + /* Set serial device address */ + rc = stk1160_write_reg(dev, STK1160_SICTL_SDA, addr); + if (rc < 0) + return rc; + + /* Set i2c device register sub-address */ + rc = stk1160_write_reg(dev, STK1160_SBUSR_RA, reg); + if (rc < 0) + return rc; + + /* Start read now */ + rc = stk1160_write_reg(dev, STK1160_SICTL, 0x20); + if (rc < 0) + return rc; + + rc = stk1160_i2c_busy_wait(dev, 0x01); + if (rc < 0) + return rc; + + stk1160_read_reg(dev, STK1160_SBUSR_RD, value); + if (rc < 0) + return rc; + + return 0; +} + +/* + * stk1160_i2c_check_for_device() + * check if there is a i2c_device at the supplied address + */ +static int stk1160_i2c_check_for_device(struct stk1160 *dev, + unsigned char addr) +{ + int rc; + + /* Set serial device address */ + rc = stk1160_write_reg(dev, STK1160_SICTL_SDA, addr); + if (rc < 0) + return rc; + + /* Set device sub-address, we'll chip version reg */ + rc = stk1160_write_reg(dev, STK1160_SBUSR_RA, 0x00); + if (rc < 0) + return rc; + + /* Start read now */ + rc = stk1160_write_reg(dev, STK1160_SICTL, 0x20); + if (rc < 0) + return rc; + + rc = stk1160_i2c_busy_wait(dev, 0x01); + if (rc < 0) + return -ENODEV; + + return 0; +} + +/* + * stk1160_i2c_xfer() + * the main i2c transfer function + */ +static int stk1160_i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msgs[], int num) +{ + struct stk1160 *dev = i2c_adap->algo_data; + int addr, rc, i; + + for (i = 0; i < num; i++) { + addr = msgs[i].addr << 1; + dprintk_i2c("%s: addr=%x", __func__, addr); + + if (!msgs[i].len) { + /* no len: check only for device presence */ + rc = stk1160_i2c_check_for_device(dev, addr); + if (rc < 0) { + dprintk_i2c(" no device\n"); + return rc; + } + + } else if (msgs[i].flags & I2C_M_RD) { + /* read request without preceding register selection */ + dprintk_i2c(" subaddr not selected"); + rc = -EOPNOTSUPP; + goto err; + + } else if (i + 1 < num && msgs[i].len <= 2 && + (msgs[i + 1].flags & I2C_M_RD) && + msgs[i].addr == msgs[i + 1].addr) { + + if (msgs[i].len != 1 || msgs[i + 1].len != 1) { + dprintk_i2c(" len not supported"); + rc = -EOPNOTSUPP; + goto err; + } + + dprintk_i2c(" subaddr=%x", msgs[i].buf[0]); + + rc = stk1160_i2c_read_reg(dev, addr, msgs[i].buf[0], + msgs[i + 1].buf); + + dprintk_i2c(" read=%x", *msgs[i + 1].buf); + + /* consumed two msgs, so we skip one of them */ + i++; + + } else { + if (msgs[i].len != 2) { + dprintk_i2c(" len not supported"); + rc = -EOPNOTSUPP; + goto err; + } + + dprintk_i2c(" subaddr=%x write=%x", + msgs[i].buf[0], msgs[i].buf[1]); + + rc = stk1160_i2c_write_reg(dev, addr, msgs[i].buf[0], + msgs[i].buf[1]); + } + + if (rc < 0) + goto err; + dprintk_i2c(" OK\n"); + } + + return num; +err: + dprintk_i2c(" ERROR: %d\n", rc); + return num; +} + +/* + * functionality(), what da heck is this? + */ +static u32 functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm algo = { + .master_xfer = stk1160_i2c_xfer, + .functionality = functionality, +}; + +static struct i2c_adapter adap_template = { + .owner = THIS_MODULE, + .name = "stk1160", + .algo = &algo, +}; + +static struct i2c_client client_template = { + .name = "stk1160 internal", +}; + +/* + * stk1160_i2c_register() + * register i2c bus + */ +int stk1160_i2c_register(struct stk1160 *dev) +{ + int rc; + + dev->i2c_adap = adap_template; + dev->i2c_adap.dev.parent = dev->dev; + strcpy(dev->i2c_adap.name, "stk1160"); + dev->i2c_adap.algo_data = dev; + + i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev); + + rc = i2c_add_adapter(&dev->i2c_adap); + if (rc < 0) { + stk1160_err("cannot add i2c adapter (%d)\n", rc); + return rc; + } + + dev->i2c_client = client_template; + dev->i2c_client.adapter = &dev->i2c_adap; + + /* Set i2c clock divider device address */ + stk1160_write_reg(dev, STK1160_SICTL_CD, 0x0f); + + /* ??? */ + stk1160_write_reg(dev, STK1160_ASIC + 3, 0x00); + + return 0; +} + +/* + * stk1160_i2c_unregister() + * unregister i2c_bus + */ +int stk1160_i2c_unregister(struct stk1160 *dev) +{ + i2c_del_adapter(&dev->i2c_adap); + return 0; +} diff --git a/drivers/media/usb/stk1160/stk1160-reg.h b/drivers/media/usb/stk1160/stk1160-reg.h new file mode 100644 index 0000000000000000000000000000000000000000..3e49da6e7edd08935e23e21e9b67856ca91de59b --- /dev/null +++ b/drivers/media/usb/stk1160/stk1160-reg.h @@ -0,0 +1,93 @@ +/* + * STK1160 driver + * + * Copyright (C) 2012 Ezequiel Garcia + * + * + * Based on Easycap driver by R.M. Thomas + * Copyright (C) 2010 R.M. Thomas + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +/* GPIO Control */ +#define STK1160_GCTRL 0x000 + +/* Remote Wakup Control */ +#define STK1160_RMCTL 0x00c + +/* + * Decoder Control Register: + * This byte controls capture start/stop + * with bit #7 (0x?? OR 0x80 to activate). + */ +#define STK1160_DCTRL 0x100 + +/* Capture Frame Start Position */ +#define STK116_CFSPO 0x110 +#define STK116_CFSPO_STX_L 0x110 +#define STK116_CFSPO_STX_H 0x111 +#define STK116_CFSPO_STY_L 0x112 +#define STK116_CFSPO_STY_H 0x113 + +/* Capture Frame End Position */ +#define STK116_CFEPO 0x114 +#define STK116_CFEPO_ENX_L 0x114 +#define STK116_CFEPO_ENX_H 0x115 +#define STK116_CFEPO_ENY_L 0x116 +#define STK116_CFEPO_ENY_H 0x117 + +/* Serial Interface Control */ +#define STK1160_SICTL 0x200 +#define STK1160_SICTL_CD 0x202 +#define STK1160_SICTL_SDA 0x203 + +/* Serial Bus Write */ +#define STK1160_SBUSW 0x204 +#define STK1160_SBUSW_WA 0x204 +#define STK1160_SBUSW_WD 0x205 + +/* Serial Bus Read */ +#define STK1160_SBUSR 0x208 +#define STK1160_SBUSR_RA 0x208 +#define STK1160_SBUSR_RD 0x209 + +/* Alternate Serial Inteface Control */ +#define STK1160_ASIC 0x2fc + +/* PLL Select Options */ +#define STK1160_PLLSO 0x018 + +/* PLL Frequency Divider */ +#define STK1160_PLLFD 0x01c + +/* Timing Generator */ +#define STK1160_TIGEN 0x300 + +/* Timing Control Parameter */ +#define STK1160_TICTL 0x350 + +/* AC97 Audio Control */ +#define STK1160_AC97CTL_0 0x500 +#define STK1160_AC97CTL_1 0x504 + +/* Use [0:6] bits of register 0x504 to set codec command address */ +#define STK1160_AC97_ADDR 0x504 +/* Use [16:31] bits of register 0x500 to set codec command data */ +#define STK1160_AC97_CMD 0x502 + +/* Audio I2S Interface */ +#define STK1160_I2SCTL 0x50c + +/* EEPROM Interface */ +#define STK1160_EEPROM_SZ 0x5f0 diff --git a/drivers/media/usb/stk1160/stk1160-v4l.c b/drivers/media/usb/stk1160/stk1160-v4l.c new file mode 100644 index 0000000000000000000000000000000000000000..fe6e857969cadb0c2807a788f1c59973e9219229 --- /dev/null +++ b/drivers/media/usb/stk1160/stk1160-v4l.c @@ -0,0 +1,739 @@ +/* + * STK1160 driver + * + * Copyright (C) 2012 Ezequiel Garcia + * + * + * Based on Easycap driver by R.M. Thomas + * Copyright (C) 2010 R.M. Thomas + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "stk1160.h" +#include "stk1160-reg.h" + +static unsigned int vidioc_debug; +module_param(vidioc_debug, int, 0644); +MODULE_PARM_DESC(vidioc_debug, "enable debug messages [vidioc]"); + +static bool keep_buffers; +module_param(keep_buffers, bool, 0644); +MODULE_PARM_DESC(keep_buffers, "don't release buffers upon stop streaming"); + +/* supported video standards */ +static struct stk1160_fmt format[] = { + { + .name = "16 bpp YUY2, 4:2:2, packed", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = 16, + } +}; + +static void stk1160_set_std(struct stk1160 *dev) +{ + int i; + + static struct regval std525[] = { + + /* 720x480 */ + + /* Frame start */ + {STK116_CFSPO_STX_L, 0x0000}, + {STK116_CFSPO_STX_H, 0x0000}, + {STK116_CFSPO_STY_L, 0x0003}, + {STK116_CFSPO_STY_H, 0x0000}, + + /* Frame end */ + {STK116_CFEPO_ENX_L, 0x05a0}, + {STK116_CFEPO_ENX_H, 0x0005}, + {STK116_CFEPO_ENY_L, 0x00f3}, + {STK116_CFEPO_ENY_H, 0x0000}, + + {0xffff, 0xffff} + }; + + static struct regval std625[] = { + + /* 720x576 */ + + /* TODO: Each line of frame has some junk at the end */ + /* Frame start */ + {STK116_CFSPO, 0x0000}, + {STK116_CFSPO+1, 0x0000}, + {STK116_CFSPO+2, 0x0001}, + {STK116_CFSPO+3, 0x0000}, + + /* Frame end */ + {STK116_CFEPO, 0x05a0}, + {STK116_CFEPO+1, 0x0005}, + {STK116_CFEPO+2, 0x0121}, + {STK116_CFEPO+3, 0x0001}, + + {0xffff, 0xffff} + }; + + if (dev->norm & V4L2_STD_525_60) { + stk1160_dbg("registers to NTSC like standard\n"); + for (i = 0; std525[i].reg != 0xffff; i++) + stk1160_write_reg(dev, std525[i].reg, std525[i].val); + } else { + stk1160_dbg("registers to PAL like standard\n"); + for (i = 0; std625[i].reg != 0xffff; i++) + stk1160_write_reg(dev, std625[i].reg, std625[i].val); + } + +} + +/* + * Set a new alternate setting. + * Returns true is dev->max_pkt_size has changed, false otherwise. + */ +static bool stk1160_set_alternate(struct stk1160 *dev) +{ + int i, prev_alt = dev->alt; + unsigned int min_pkt_size; + bool new_pkt_size; + + /* + * If we don't set right alternate, + * then we will get a green screen with junk. + */ + min_pkt_size = STK1160_MIN_PKT_SIZE; + + for (i = 0; i < dev->num_alt; i++) { + /* stop when the selected alt setting offers enough bandwidth */ + if (dev->alt_max_pkt_size[i] >= min_pkt_size) { + dev->alt = i; + break; + /* + * otherwise make sure that we end up with the maximum bandwidth + * because the min_pkt_size equation might be wrong... + */ + } else if (dev->alt_max_pkt_size[i] > + dev->alt_max_pkt_size[dev->alt]) + dev->alt = i; + } + + stk1160_info("setting alternate %d\n", dev->alt); + + if (dev->alt != prev_alt) { + stk1160_dbg("minimum isoc packet size: %u (alt=%d)\n", + min_pkt_size, dev->alt); + stk1160_dbg("setting alt %d with wMaxPacketSize=%u\n", + dev->alt, dev->alt_max_pkt_size[dev->alt]); + usb_set_interface(dev->udev, 0, dev->alt); + } + + new_pkt_size = dev->max_pkt_size != dev->alt_max_pkt_size[dev->alt]; + dev->max_pkt_size = dev->alt_max_pkt_size[dev->alt]; + + return new_pkt_size; +} + +static int stk1160_start_streaming(struct stk1160 *dev) +{ + bool new_pkt_size; + int rc = 0; + int i; + + /* Check device presence */ + if (!dev->udev) + return -ENODEV; + + if (mutex_lock_interruptible(&dev->v4l_lock)) + return -ERESTARTSYS; + /* + * For some reason it is mandatory to set alternate *first* + * and only *then* initialize isoc urbs. + * Someone please explain me why ;) + */ + new_pkt_size = stk1160_set_alternate(dev); + + /* + * We (re)allocate isoc urbs if: + * there is no allocated isoc urbs, OR + * a new dev->max_pkt_size is detected + */ + if (!dev->isoc_ctl.num_bufs || new_pkt_size) { + rc = stk1160_alloc_isoc(dev); + if (rc < 0) + goto out_stop_hw; + } + + /* submit urbs and enables IRQ */ + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_KERNEL); + if (rc) { + stk1160_err("cannot submit urb[%d] (%d)\n", i, rc); + goto out_uninit; + } + } + + /* Start saa711x */ + v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 1); + + /* Start stk1160 */ + stk1160_write_reg(dev, STK1160_DCTRL, 0xb3); + stk1160_write_reg(dev, STK1160_DCTRL+3, 0x00); + + stk1160_dbg("streaming started\n"); + + mutex_unlock(&dev->v4l_lock); + + return 0; + +out_uninit: + stk1160_uninit_isoc(dev); +out_stop_hw: + usb_set_interface(dev->udev, 0, 0); + stk1160_clear_queue(dev); + + mutex_unlock(&dev->v4l_lock); + + return rc; +} + +/* Must be called with v4l_lock hold */ +static void stk1160_stop_hw(struct stk1160 *dev) +{ + /* If the device is not physically present, there is nothing to do */ + if (!dev->udev) + return; + + /* set alternate 0 */ + dev->alt = 0; + stk1160_info("setting alternate %d\n", dev->alt); + usb_set_interface(dev->udev, 0, 0); + + /* Stop stk1160 */ + stk1160_write_reg(dev, STK1160_DCTRL, 0x00); + stk1160_write_reg(dev, STK1160_DCTRL+3, 0x00); + + /* Stop saa711x */ + v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0); +} + +static int stk1160_stop_streaming(struct stk1160 *dev) +{ + if (mutex_lock_interruptible(&dev->v4l_lock)) + return -ERESTARTSYS; + + stk1160_cancel_isoc(dev); + + /* + * It is possible to keep buffers around using a module parameter. + * This is intended to avoid memory fragmentation. + */ + if (!keep_buffers) + stk1160_free_isoc(dev); + + stk1160_stop_hw(dev); + + stk1160_clear_queue(dev); + + stk1160_dbg("streaming stopped\n"); + + mutex_unlock(&dev->v4l_lock); + + return 0; +} + +static struct v4l2_file_operations stk1160_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .read = vb2_fop_read, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, + .unlocked_ioctl = video_ioctl2, +}; + +/* + * vidioc ioctls + */ +static int vidioc_querycap(struct file *file, + void *priv, struct v4l2_capability *cap) +{ + struct stk1160 *dev = video_drvdata(file); + + strcpy(cap->driver, "stk1160"); + strcpy(cap->card, "stk1160"); + usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); + cap->device_caps = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_STREAMING | + V4L2_CAP_READWRITE; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (f->index != 0) + return -EINVAL; + + strlcpy(f->description, format[f->index].name, sizeof(f->description)); + f->pixelformat = format[f->index].fourcc; + return 0; +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct stk1160 *dev = video_drvdata(file); + + f->fmt.pix.width = dev->width; + f->fmt.pix.height = dev->height; + f->fmt.pix.field = V4L2_FIELD_INTERLACED; + f->fmt.pix.pixelformat = dev->fmt->fourcc; + f->fmt.pix.bytesperline = dev->width * 2; + f->fmt.pix.sizeimage = dev->height * f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct stk1160 *dev = video_drvdata(file); + + /* + * User can't choose size at his own will, + * so we just return him the current size chosen + * at standard selection. + * TODO: Implement frame scaling? + */ + + f->fmt.pix.pixelformat = dev->fmt->fourcc; + f->fmt.pix.width = dev->width; + f->fmt.pix.height = dev->height; + f->fmt.pix.field = V4L2_FIELD_INTERLACED; + f->fmt.pix.bytesperline = dev->width * 2; + f->fmt.pix.sizeimage = dev->height * f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct stk1160 *dev = video_drvdata(file); + struct vb2_queue *q = &dev->vb_vidq; + + if (vb2_is_busy(q)) + return -EBUSY; + + vidioc_try_fmt_vid_cap(file, priv, f); + + /* We don't support any format changes */ + + return 0; +} + +static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *norm) +{ + struct stk1160 *dev = video_drvdata(file); + v4l2_device_call_all(&dev->v4l2_dev, 0, video, querystd, norm); + return 0; +} + +static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm) +{ + struct stk1160 *dev = video_drvdata(file); + + *norm = dev->norm; + return 0; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm) +{ + struct stk1160 *dev = video_drvdata(file); + struct vb2_queue *q = &dev->vb_vidq; + + if (vb2_is_busy(q)) + return -EBUSY; + + /* Check device presence */ + if (!dev->udev) + return -ENODEV; + + /* We need to set this now, before we call stk1160_set_std */ + dev->norm = *norm; + + /* This is taken from saa7115 video decoder */ + if (dev->norm & V4L2_STD_525_60) { + dev->width = 720; + dev->height = 480; + } else if (dev->norm & V4L2_STD_625_50) { + dev->width = 720; + dev->height = 576; + } else { + stk1160_err("invalid standard\n"); + return -EINVAL; + } + + stk1160_set_std(dev); + + v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, + dev->norm); + + return 0; +} + + +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + struct stk1160 *dev = video_drvdata(file); + + if (i->index > STK1160_MAX_INPUT) + return -EINVAL; + + sprintf(i->name, "Composite%d", i->index); + i->type = V4L2_INPUT_TYPE_CAMERA; + i->std = dev->vdev.tvnorms; + return 0; +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + struct stk1160 *dev = video_drvdata(file); + *i = dev->ctl_input; + return 0; +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + struct stk1160 *dev = video_drvdata(file); + + if (vb2_is_busy(&dev->vb_vidq)) + return -EBUSY; + + if (i > STK1160_MAX_INPUT) + return -EINVAL; + + dev->ctl_input = i; + + stk1160_select_input(dev); + + return 0; +} + +static int vidioc_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + switch (chip->match.type) { + case V4L2_CHIP_MATCH_HOST: + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + return 0; + default: + return -EINVAL; + } +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vidioc_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct stk1160 *dev = video_drvdata(file); + int rc; + u8 val; + + switch (reg->match.type) { + case V4L2_CHIP_MATCH_AC97: + /* TODO: Support me please :-( */ + return -EINVAL; + case V4L2_CHIP_MATCH_I2C_DRIVER: + v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_register, reg); + return 0; + case V4L2_CHIP_MATCH_I2C_ADDR: + /* TODO: is this correct? */ + v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_register, reg); + return 0; + default: + if (!v4l2_chip_match_host(®->match)) + return -EINVAL; + } + + /* Match host */ + rc = stk1160_read_reg(dev, reg->reg, &val); + reg->val = val; + reg->size = 1; + + return rc; +} + +static int vidioc_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct stk1160 *dev = video_drvdata(file); + + switch (reg->match.type) { + case V4L2_CHIP_MATCH_AC97: + return -EINVAL; + case V4L2_CHIP_MATCH_I2C_DRIVER: + v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_register, reg); + return 0; + case V4L2_CHIP_MATCH_I2C_ADDR: + /* TODO: is this correct? */ + v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_register, reg); + return 0; + default: + if (!v4l2_chip_match_host(®->match)) + return -EINVAL; + } + + /* Match host */ + return stk1160_write_reg(dev, reg->reg, cpu_to_le16(reg->val)); +} +#endif + +static const struct v4l2_ioctl_ops stk1160_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_querystd = vidioc_querystd, + .vidioc_g_std = vidioc_g_std, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + + /* vb2 takes care of these */ + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, + .vidioc_g_chip_ident = vidioc_g_chip_ident, + +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vidioc_g_register, + .vidioc_s_register = vidioc_s_register, +#endif +}; + +/********************************************************************/ + +/* + * Videobuf2 operations + */ +static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *v4l_fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct stk1160 *dev = vb2_get_drv_priv(vq); + unsigned long size; + + size = dev->width * dev->height * 2; + + /* + * Here we can change the number of buffers being requested. + * So, we set a minimum and a maximum like this: + */ + *nbuffers = clamp_t(unsigned int, *nbuffers, + STK1160_MIN_VIDEO_BUFFERS, STK1160_MAX_VIDEO_BUFFERS); + + /* This means a packed colorformat */ + *nplanes = 1; + + sizes[0] = size; + + stk1160_info("%s: buffer count %d, each %ld bytes\n", + __func__, *nbuffers, size); + + return 0; +} + +static void buffer_queue(struct vb2_buffer *vb) +{ + unsigned long flags; + struct stk1160 *dev = vb2_get_drv_priv(vb->vb2_queue); + struct stk1160_buffer *buf = + container_of(vb, struct stk1160_buffer, vb); + + spin_lock_irqsave(&dev->buf_lock, flags); + if (!dev->udev) { + /* + * If the device is disconnected return the buffer to userspace + * directly. The next QBUF call will fail with -ENODEV. + */ + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + } else { + + buf->mem = vb2_plane_vaddr(vb, 0); + buf->length = vb2_plane_size(vb, 0); + buf->bytesused = 0; + buf->pos = 0; + + /* + * If buffer length is less from expected then we return + * the buffer to userspace directly. + */ + if (buf->length < dev->width * dev->height * 2) + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + else + list_add_tail(&buf->list, &dev->avail_bufs); + + } + spin_unlock_irqrestore(&dev->buf_lock, flags); +} + +static int start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct stk1160 *dev = vb2_get_drv_priv(vq); + return stk1160_start_streaming(dev); +} + +/* abort streaming and wait for last buffer */ +static int stop_streaming(struct vb2_queue *vq) +{ + struct stk1160 *dev = vb2_get_drv_priv(vq); + return stk1160_stop_streaming(dev); +} + +static struct vb2_ops stk1160_video_qops = { + .queue_setup = queue_setup, + .buf_queue = buffer_queue, + .start_streaming = start_streaming, + .stop_streaming = stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +static struct video_device v4l_template = { + .name = "stk1160", + .tvnorms = V4L2_STD_525_60 | V4L2_STD_625_50, + .fops = &stk1160_fops, + .ioctl_ops = &stk1160_ioctl_ops, + .release = video_device_release_empty, +}; + +/********************************************************************/ + +/* Must be called with both v4l_lock and vb_queue_lock hold */ +void stk1160_clear_queue(struct stk1160 *dev) +{ + struct stk1160_buffer *buf; + unsigned long flags; + + /* Release all active buffers */ + spin_lock_irqsave(&dev->buf_lock, flags); + while (!list_empty(&dev->avail_bufs)) { + buf = list_first_entry(&dev->avail_bufs, + struct stk1160_buffer, list); + list_del(&buf->list); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + stk1160_info("buffer [%p/%d] aborted\n", + buf, buf->vb.v4l2_buf.index); + } + /* It's important to clear current buffer */ + dev->isoc_ctl.buf = NULL; + spin_unlock_irqrestore(&dev->buf_lock, flags); +} + +int stk1160_vb2_setup(struct stk1160 *dev) +{ + int rc; + struct vb2_queue *q; + + q = &dev->vb_vidq; + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_READ | VB2_MMAP | VB2_USERPTR; + q->drv_priv = dev; + q->buf_struct_size = sizeof(struct stk1160_buffer); + q->ops = &stk1160_video_qops; + q->mem_ops = &vb2_vmalloc_memops; + + rc = vb2_queue_init(q); + if (rc < 0) + return rc; + + /* initialize video dma queue */ + INIT_LIST_HEAD(&dev->avail_bufs); + + return 0; +} + +int stk1160_video_register(struct stk1160 *dev) +{ + int rc; + + /* Initialize video_device with a template structure */ + dev->vdev = v4l_template; + dev->vdev.debug = vidioc_debug; + dev->vdev.queue = &dev->vb_vidq; + + /* + * Provide mutexes for v4l2 core and for videobuf2 queue. + * It will be used to protect *only* v4l2 ioctls. + */ + dev->vdev.lock = &dev->v4l_lock; + dev->vdev.queue->lock = &dev->vb_queue_lock; + + /* This will be used to set video_device parent */ + dev->vdev.v4l2_dev = &dev->v4l2_dev; + set_bit(V4L2_FL_USE_FH_PRIO, &dev->vdev.flags); + + /* NTSC is default */ + dev->norm = V4L2_STD_NTSC_M; + dev->width = 720; + dev->height = 480; + + /* set default format */ + dev->fmt = &format[0]; + stk1160_set_std(dev); + + v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, + dev->norm); + + video_set_drvdata(&dev->vdev, dev); + rc = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1); + if (rc < 0) { + stk1160_err("video_register_device failed (%d)\n", rc); + return rc; + } + + v4l2_info(&dev->v4l2_dev, "V4L2 device registered as %s\n", + video_device_node_name(&dev->vdev)); + + return 0; +} diff --git a/drivers/media/usb/stk1160/stk1160-video.c b/drivers/media/usb/stk1160/stk1160-video.c new file mode 100644 index 0000000000000000000000000000000000000000..8bdfb0275313929d0698817eedb5143ecec72ec0 --- /dev/null +++ b/drivers/media/usb/stk1160/stk1160-video.c @@ -0,0 +1,522 @@ +/* + * STK1160 driver + * + * Copyright (C) 2012 Ezequiel Garcia + * + * + * Based on Easycap driver by R.M. Thomas + * Copyright (C) 2010 R.M. Thomas + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include + +#include "stk1160.h" + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +static inline void print_err_status(struct stk1160 *dev, + int packet, int status) +{ + char *errmsg = "Unknown"; + + switch (status) { + case -ENOENT: + errmsg = "unlinked synchronuously"; + break; + case -ECONNRESET: + errmsg = "unlinked asynchronuously"; + break; + case -ENOSR: + errmsg = "Buffer error (overrun)"; + break; + case -EPIPE: + errmsg = "Stalled (device not responding)"; + break; + case -EOVERFLOW: + errmsg = "Babble (bad cable?)"; + break; + case -EPROTO: + errmsg = "Bit-stuff error (bad cable?)"; + break; + case -EILSEQ: + errmsg = "CRC/Timeout (could be anything)"; + break; + case -ETIME: + errmsg = "Device does not respond"; + break; + } + + if (packet < 0) + printk_ratelimited(KERN_WARNING "URB status %d [%s].\n", + status, errmsg); + else + printk_ratelimited(KERN_INFO "URB packet %d, status %d [%s].\n", + packet, status, errmsg); +} + +static inline +struct stk1160_buffer *stk1160_next_buffer(struct stk1160 *dev) +{ + struct stk1160_buffer *buf = NULL; + unsigned long flags = 0; + + /* Current buffer must be NULL when this functions gets called */ + BUG_ON(dev->isoc_ctl.buf); + + spin_lock_irqsave(&dev->buf_lock, flags); + if (!list_empty(&dev->avail_bufs)) { + buf = list_first_entry(&dev->avail_bufs, + struct stk1160_buffer, list); + list_del(&buf->list); + } + spin_unlock_irqrestore(&dev->buf_lock, flags); + + return buf; +} + +static inline +void stk1160_buffer_done(struct stk1160 *dev) +{ + struct stk1160_buffer *buf = dev->isoc_ctl.buf; + + dev->field_count++; + + buf->vb.v4l2_buf.sequence = dev->field_count >> 1; + buf->vb.v4l2_buf.field = V4L2_FIELD_INTERLACED; + buf->vb.v4l2_buf.bytesused = buf->bytesused; + do_gettimeofday(&buf->vb.v4l2_buf.timestamp); + + vb2_set_plane_payload(&buf->vb, 0, buf->bytesused); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE); + + dev->isoc_ctl.buf = NULL; +} + +static inline +void stk1160_copy_video(struct stk1160 *dev, u8 *src, int len) +{ + int linesdone, lineoff, lencopy; + int bytesperline = dev->width * 2; + struct stk1160_buffer *buf = dev->isoc_ctl.buf; + u8 *dst = buf->mem; + int remain; + + /* + * TODO: These stk1160_dbg are very spammy! + * We should 1) check why we are getting them + * and 2) add ratelimit. + * + * UPDATE: One of the reasons (the only one?) for getting these + * is incorrect standard (mismatch between expected and configured). + * So perhaps, we could add a counter for errors. When the counter + * reaches some value, we simply stop streaming. + */ + + len -= 4; + src += 4; + + remain = len; + + linesdone = buf->pos / bytesperline; + lineoff = buf->pos % bytesperline; /* offset in current line */ + + if (!buf->odd) + dst += bytesperline; + + /* Multiply linesdone by two, to take account of the other field */ + dst += linesdone * bytesperline * 2 + lineoff; + + /* Copy the remaining of current line */ + if (remain < (bytesperline - lineoff)) + lencopy = remain; + else + lencopy = bytesperline - lineoff; + + /* + * Check if we have enough space left in the buffer. + * In that case, we force loop exit after copy. + */ + if (lencopy > buf->bytesused - buf->length) { + lencopy = buf->bytesused - buf->length; + remain = lencopy; + } + + /* Check if the copy is done */ + if (lencopy == 0 || remain == 0) + return; + + /* Let the bug hunt begin! sanity checks! */ + if (lencopy < 0) { + stk1160_dbg("copy skipped: negative lencopy\n"); + return; + } + + if ((unsigned long)dst + lencopy > + (unsigned long)buf->mem + buf->length) { + printk_ratelimited(KERN_WARNING "stk1160: buffer overflow detected\n"); + return; + } + + memcpy(dst, src, lencopy); + + buf->bytesused += lencopy; + buf->pos += lencopy; + remain -= lencopy; + + /* Copy current field line by line, interlacing with the other field */ + while (remain > 0) { + + dst += lencopy + bytesperline; + src += lencopy; + + /* Copy one line at a time */ + if (remain < bytesperline) + lencopy = remain; + else + lencopy = bytesperline; + + /* + * Check if we have enough space left in the buffer. + * In that case, we force loop exit after copy. + */ + if (lencopy > buf->bytesused - buf->length) { + lencopy = buf->bytesused - buf->length; + remain = lencopy; + } + + /* Check if the copy is done */ + if (lencopy == 0 || remain == 0) + return; + + if (lencopy < 0) { + printk_ratelimited(KERN_WARNING "stk1160: negative lencopy detected\n"); + return; + } + + if ((unsigned long)dst + lencopy > + (unsigned long)buf->mem + buf->length) { + printk_ratelimited(KERN_WARNING "stk1160: buffer overflow detected\n"); + return; + } + + memcpy(dst, src, lencopy); + remain -= lencopy; + + buf->bytesused += lencopy; + buf->pos += lencopy; + } +} + +/* + * Controls the isoc copy of each urb packet + */ +static void stk1160_process_isoc(struct stk1160 *dev, struct urb *urb) +{ + int i, len, status; + u8 *p; + + if (!dev) { + stk1160_warn("%s called with null device\n", __func__); + return; + } + + if (urb->status < 0) { + /* Print status and drop current packet (or field?) */ + print_err_status(dev, -1, urb->status); + return; + } + + for (i = 0; i < urb->number_of_packets; i++) { + status = urb->iso_frame_desc[i].status; + if (status < 0) { + print_err_status(dev, i, status); + continue; + } + + /* Get packet actual length and pointer to data */ + p = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + len = urb->iso_frame_desc[i].actual_length; + + /* Empty packet */ + if (len <= 4) + continue; + + /* + * An 8-byte packet sequence means end of field. + * So if we don't have any packet, we start receiving one now + * and if we do have a packet, then we are done with it. + * + * These end of field packets are always 0xc0 or 0x80, + * but not always 8-byte long so we don't check packet length. + */ + if (p[0] == 0xc0) { + + /* + * If first byte is 0xc0 then we received + * second field, and frame has ended. + */ + if (dev->isoc_ctl.buf != NULL) + stk1160_buffer_done(dev); + + dev->isoc_ctl.buf = stk1160_next_buffer(dev); + if (dev->isoc_ctl.buf == NULL) + return; + } + + /* + * If we don't have a buffer here, then it means we + * haven't found the start mark sequence. + */ + if (dev->isoc_ctl.buf == NULL) + continue; + + if (p[0] == 0xc0 || p[0] == 0x80) { + + /* We set next packet parity and + * continue to get next one + */ + dev->isoc_ctl.buf->odd = *p & 0x40; + dev->isoc_ctl.buf->pos = 0; + continue; + } + + stk1160_copy_video(dev, p, len); + } +} + + +/* + * IRQ callback, called by URB callback + */ +static void stk1160_isoc_irq(struct urb *urb) +{ + int i, rc; + struct stk1160 *dev = urb->context; + + switch (urb->status) { + case 0: + break; + case -ECONNRESET: /* kill */ + case -ENOENT: + case -ESHUTDOWN: + /* TODO: check uvc driver: he frees the queue here */ + return; + default: + stk1160_err("urb error! status %d\n", urb->status); + return; + } + + stk1160_process_isoc(dev, urb); + + /* Reset urb buffers */ + for (i = 0; i < urb->number_of_packets; i++) { + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + + rc = usb_submit_urb(urb, GFP_ATOMIC); + if (rc) + stk1160_err("urb re-submit failed (%d)\n", rc); +} + +/* + * Cancel urbs + * This function can't be called in atomic context + */ +void stk1160_cancel_isoc(struct stk1160 *dev) +{ + int i, num_bufs = dev->isoc_ctl.num_bufs; + + /* + * This check is not necessary, but we add it + * to avoid a spurious debug message + */ + if (!num_bufs) + return; + + stk1160_dbg("killing %d urbs...\n", num_bufs); + + for (i = 0; i < num_bufs; i++) { + + /* + * To kill urbs we can't be in atomic context. + * We don't care for NULL pointer since + * usb_kill_urb allows it. + */ + usb_kill_urb(dev->isoc_ctl.urb[i]); + } + + stk1160_dbg("all urbs killed\n"); +} + +/* + * Releases urb and transfer buffers + * Obviusly, associated urb must be killed before releasing it. + */ +void stk1160_free_isoc(struct stk1160 *dev) +{ + struct urb *urb; + int i, num_bufs = dev->isoc_ctl.num_bufs; + + stk1160_dbg("freeing %d urb buffers...\n", num_bufs); + + for (i = 0; i < num_bufs; i++) { + + urb = dev->isoc_ctl.urb[i]; + if (urb) { + + if (dev->isoc_ctl.transfer_buffer[i]) { +#ifndef CONFIG_DMA_NONCOHERENT + usb_free_coherent(dev->udev, + urb->transfer_buffer_length, + dev->isoc_ctl.transfer_buffer[i], + urb->transfer_dma); +#else + kfree(dev->isoc_ctl.transfer_buffer[i]); +#endif + } + usb_free_urb(urb); + dev->isoc_ctl.urb[i] = NULL; + } + dev->isoc_ctl.transfer_buffer[i] = NULL; + } + + kfree(dev->isoc_ctl.urb); + kfree(dev->isoc_ctl.transfer_buffer); + + dev->isoc_ctl.urb = NULL; + dev->isoc_ctl.transfer_buffer = NULL; + dev->isoc_ctl.num_bufs = 0; + + stk1160_dbg("all urb buffers freed\n"); +} + +/* + * Helper for cancelling and freeing urbs + * This function can't be called in atomic context + */ +void stk1160_uninit_isoc(struct stk1160 *dev) +{ + stk1160_cancel_isoc(dev); + stk1160_free_isoc(dev); +} + +/* + * Allocate URBs + */ +int stk1160_alloc_isoc(struct stk1160 *dev) +{ + struct urb *urb; + int i, j, k, sb_size, max_packets, num_bufs; + + /* + * It may be necessary to release isoc here, + * since isoc are only released on disconnection. + * (see new_pkt_size flag) + */ + if (dev->isoc_ctl.num_bufs) + stk1160_uninit_isoc(dev); + + stk1160_dbg("allocating urbs...\n"); + + num_bufs = STK1160_NUM_BUFS; + max_packets = STK1160_NUM_PACKETS; + sb_size = max_packets * dev->max_pkt_size; + + dev->isoc_ctl.buf = NULL; + dev->isoc_ctl.max_pkt_size = dev->max_pkt_size; + dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); + if (!dev->isoc_ctl.urb) { + stk1160_err("out of memory for urb array\n"); + return -ENOMEM; + } + + dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs, + GFP_KERNEL); + if (!dev->isoc_ctl.transfer_buffer) { + stk1160_err("out of memory for usb transfers\n"); + kfree(dev->isoc_ctl.urb); + return -ENOMEM; + } + + /* allocate urbs and transfer buffers */ + for (i = 0; i < num_bufs; i++) { + + urb = usb_alloc_urb(max_packets, GFP_KERNEL); + if (!urb) { + stk1160_err("cannot alloc urb[%d]\n", i); + goto free_i_bufs; + } + dev->isoc_ctl.urb[i] = urb; + +#ifndef CONFIG_DMA_NONCOHERENT + dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->udev, + sb_size, GFP_KERNEL, &urb->transfer_dma); +#else + dev->isoc_ctl.transfer_buffer[i] = kmalloc(sb_size, GFP_KERNEL); +#endif + if (!dev->isoc_ctl.transfer_buffer[i]) { + stk1160_err("cannot alloc %d bytes for tx[%d] buffer\n", + sb_size, i); + goto free_i_bufs; + } + memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size); + + /* + * FIXME: Where can I get the endpoint? + */ + urb->dev = dev->udev; + urb->pipe = usb_rcvisocpipe(dev->udev, STK1160_EP_VIDEO); + urb->transfer_buffer = dev->isoc_ctl.transfer_buffer[i]; + urb->transfer_buffer_length = sb_size; + urb->complete = stk1160_isoc_irq; + urb->context = dev; + urb->interval = 1; + urb->start_frame = 0; + urb->number_of_packets = max_packets; +#ifndef CONFIG_DMA_NONCOHERENT + urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; +#else + urb->transfer_flags = URB_ISO_ASAP; +#endif + + k = 0; + for (j = 0; j < max_packets; j++) { + urb->iso_frame_desc[j].offset = k; + urb->iso_frame_desc[j].length = + dev->isoc_ctl.max_pkt_size; + k += dev->isoc_ctl.max_pkt_size; + } + } + + stk1160_dbg("urbs allocated\n"); + + /* At last we can say we have some buffers */ + dev->isoc_ctl.num_bufs = num_bufs; + + return 0; + +free_i_bufs: + /* Save the allocated buffers so far, so we can properly free them */ + dev->isoc_ctl.num_bufs = i+1; + stk1160_free_isoc(dev); + return -ENOMEM; +} + diff --git a/drivers/media/usb/stk1160/stk1160.h b/drivers/media/usb/stk1160/stk1160.h new file mode 100644 index 0000000000000000000000000000000000000000..3feba0033f98df4439795121c2004a1c5048b256 --- /dev/null +++ b/drivers/media/usb/stk1160/stk1160.h @@ -0,0 +1,208 @@ +/* + * STK1160 driver + * + * Copyright (C) 2012 Ezequiel Garcia + * + * + * Based on Easycap driver by R.M. Thomas + * Copyright (C) 2010 R.M. Thomas + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include + +#define STK1160_VERSION "0.9.5" +#define STK1160_VERSION_NUM 0x000905 + +/* TODO: Decide on number of packets for each buffer */ +#define STK1160_NUM_PACKETS 64 + +/* Number of buffers for isoc transfers */ +#define STK1160_NUM_BUFS 16 /* TODO */ + +/* TODO: This endpoint address should be retrieved */ +#define STK1160_EP_VIDEO 0x82 +#define STK1160_EP_AUDIO 0x81 + +/* Max and min video buffers */ +#define STK1160_MIN_VIDEO_BUFFERS 8 +#define STK1160_MAX_VIDEO_BUFFERS 32 + +#define STK1160_MIN_PKT_SIZE 3072 + +#define STK1160_MAX_INPUT 3 + +#define STK1160_I2C_TIMEOUT 100 + +/* TODO: Print helpers + * I could use dev_xxx, pr_xxx, v4l2_xxx or printk. + * However, there isn't a solid consensus on which + * new drivers should use. + * + */ +#define DEBUG +#ifdef DEBUG +#define stk1160_dbg(fmt, args...) \ + printk(KERN_DEBUG "stk1160: " fmt, ## args) +#else +#define stk1160_dbg(fmt, args...) +#endif + +#define stk1160_info(fmt, args...) \ + pr_info("stk1160: " fmt, ## args) + +#define stk1160_warn(fmt, args...) \ + pr_warn("stk1160: " fmt, ## args) + +#define stk1160_err(fmt, args...) \ + pr_err("stk1160: " fmt, ## args) + +/* Buffer for one video frame */ +struct stk1160_buffer { + /* common v4l buffer stuff -- must be first */ + struct vb2_buffer vb; + struct list_head list; + + void *mem; + unsigned int length; /* buffer length */ + unsigned int bytesused; /* bytes written */ + int odd; /* current oddity */ + + /* + * Since we interlace two fields per frame, + * this is different from bytesused. + */ + unsigned int pos; /* current pos inside buffer */ +}; + +struct stk1160_isoc_ctl { + /* max packet size of isoc transaction */ + int max_pkt_size; + + /* number of allocated urbs */ + int num_bufs; + + /* urb for isoc transfers */ + struct urb **urb; + + /* transfer buffers for isoc transfer */ + char **transfer_buffer; + + /* current buffer */ + struct stk1160_buffer *buf; +}; + +struct stk1160_fmt { + char *name; + u32 fourcc; /* v4l2 format id */ + int depth; +}; + +struct stk1160 { + struct v4l2_device v4l2_dev; + struct video_device vdev; + struct v4l2_ctrl_handler ctrl_handler; + + struct device *dev; + struct usb_device *udev; + + /* saa7115 subdev */ + struct v4l2_subdev *sd_saa7115; + + /* isoc control struct */ + struct list_head avail_bufs; + + /* video capture */ + struct vb2_queue vb_vidq; + + /* max packet size of isoc transaction */ + int max_pkt_size; + /* array of wMaxPacketSize */ + unsigned int *alt_max_pkt_size; + /* alternate */ + int alt; + /* Number of alternative settings */ + int num_alt; + + struct stk1160_isoc_ctl isoc_ctl; + char urb_buf[255]; /* urb control msg buffer */ + + /* frame properties */ + int width; /* current frame width */ + int height; /* current frame height */ + unsigned int ctl_input; /* selected input */ + v4l2_std_id norm; /* current norm */ + struct stk1160_fmt *fmt; /* selected format */ + + unsigned int field_count; /* not sure ??? */ + enum v4l2_field field; /* also not sure :/ */ + + /* i2c i/o */ + struct i2c_adapter i2c_adap; + struct i2c_client i2c_client; + + struct mutex v4l_lock; + struct mutex vb_queue_lock; + spinlock_t buf_lock; + + struct file *fh_owner; /* filehandle ownership */ + + /* EXPERIMENTAL */ + struct snd_card *snd_card; +}; + +struct regval { + u16 reg; + u16 val; +}; + +/* Provided by stk1160-v4l.c */ +int stk1160_vb2_setup(struct stk1160 *dev); +int stk1160_video_register(struct stk1160 *dev); +void stk1160_video_unregister(struct stk1160 *dev); +void stk1160_clear_queue(struct stk1160 *dev); + +/* Provided by stk1160-video.c */ +int stk1160_alloc_isoc(struct stk1160 *dev); +void stk1160_free_isoc(struct stk1160 *dev); +void stk1160_cancel_isoc(struct stk1160 *dev); +void stk1160_uninit_isoc(struct stk1160 *dev); + +/* Provided by stk1160-i2c.c */ +int stk1160_i2c_register(struct stk1160 *dev); +int stk1160_i2c_unregister(struct stk1160 *dev); + +/* Provided by stk1160-core.c */ +int stk1160_read_reg(struct stk1160 *dev, u16 reg, u8 *value); +int stk1160_write_reg(struct stk1160 *dev, u16 reg, u16 value); +int stk1160_write_regs_req(struct stk1160 *dev, u8 req, u16 reg, + char *buf, int len); +int stk1160_read_reg_req_len(struct stk1160 *dev, u8 req, u16 reg, + char *buf, int len); +void stk1160_select_input(struct stk1160 *dev); + +/* Provided by stk1160-ac97.c */ +#ifdef CONFIG_VIDEO_STK1160_AC97 +int stk1160_ac97_register(struct stk1160 *dev); +int stk1160_ac97_unregister(struct stk1160 *dev); +#else +static inline int stk1160_ac97_register(struct stk1160 *dev) { return 0; } +static inline int stk1160_ac97_unregister(struct stk1160 *dev) { return 0; } +#endif + diff --git a/drivers/media/usb/stkwebcam/Kconfig b/drivers/media/usb/stkwebcam/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..a6a00aa4fce66e03c7f85acfd35917a98a699f51 --- /dev/null +++ b/drivers/media/usb/stkwebcam/Kconfig @@ -0,0 +1,13 @@ +config USB_STKWEBCAM + tristate "USB Syntek DC1125 Camera support" + depends on VIDEO_V4L2 + ---help--- + Say Y here if you want to use this type of camera. + Supported devices are typically found in some Asus laptops, + with USB id 174f:a311 and 05e1:0501. Other Syntek cameras + may be supported by the stk11xx driver, from which this is + derived, see + + To compile this driver as a module, choose M here: the + module will be called stkwebcam. + diff --git a/drivers/media/usb/stkwebcam/Makefile b/drivers/media/usb/stkwebcam/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..20ef8a4b990c762f011d495d9e35f8dc6c5fff96 --- /dev/null +++ b/drivers/media/usb/stkwebcam/Makefile @@ -0,0 +1,4 @@ +stkwebcam-objs := stk-webcam.o stk-sensor.o + +obj-$(CONFIG_USB_STKWEBCAM) += stkwebcam.o + diff --git a/drivers/media/video/stk-sensor.c b/drivers/media/usb/stkwebcam/stk-sensor.c similarity index 100% rename from drivers/media/video/stk-sensor.c rename to drivers/media/usb/stkwebcam/stk-sensor.c diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c similarity index 100% rename from drivers/media/video/stk-webcam.c rename to drivers/media/usb/stkwebcam/stk-webcam.c diff --git a/drivers/media/video/stk-webcam.h b/drivers/media/usb/stkwebcam/stk-webcam.h similarity index 100% rename from drivers/media/video/stk-webcam.h rename to drivers/media/usb/stkwebcam/stk-webcam.h diff --git a/drivers/media/video/tlg2300/Kconfig b/drivers/media/usb/tlg2300/Kconfig similarity index 100% rename from drivers/media/video/tlg2300/Kconfig rename to drivers/media/usb/tlg2300/Kconfig diff --git a/drivers/media/usb/tlg2300/Makefile b/drivers/media/usb/tlg2300/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..137f8e38cdecfd986c19de331dcb800b48e1b0c4 --- /dev/null +++ b/drivers/media/usb/tlg2300/Makefile @@ -0,0 +1,9 @@ +poseidon-objs := pd-video.o pd-alsa.o pd-dvb.o pd-radio.o pd-main.o + +obj-$(CONFIG_VIDEO_TLG2300) += poseidon.o + +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends + diff --git a/drivers/media/video/tlg2300/pd-alsa.c b/drivers/media/usb/tlg2300/pd-alsa.c similarity index 99% rename from drivers/media/video/tlg2300/pd-alsa.c rename to drivers/media/usb/tlg2300/pd-alsa.c index 9f8b7da56b671fe2eeee8f942e490dbb8b65c154..3f3e141f70fb963547074f47a867e79ff4664e49 100644 --- a/drivers/media/video/tlg2300/pd-alsa.c +++ b/drivers/media/usb/tlg2300/pd-alsa.c @@ -305,6 +305,10 @@ int poseidon_audio_init(struct poseidon *p) return ret; ret = snd_pcm_new(card, "poseidon audio", 0, 0, 1, &pcm); + if (ret < 0) { + snd_card_free(card); + return ret; + } snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &pcm_capture_ops); pcm->info_flags = 0; pcm->private_data = p; diff --git a/drivers/media/video/tlg2300/pd-common.h b/drivers/media/usb/tlg2300/pd-common.h similarity index 100% rename from drivers/media/video/tlg2300/pd-common.h rename to drivers/media/usb/tlg2300/pd-common.h diff --git a/drivers/media/video/tlg2300/pd-dvb.c b/drivers/media/usb/tlg2300/pd-dvb.c similarity index 100% rename from drivers/media/video/tlg2300/pd-dvb.c rename to drivers/media/usb/tlg2300/pd-dvb.c diff --git a/drivers/media/video/tlg2300/pd-main.c b/drivers/media/usb/tlg2300/pd-main.c similarity index 100% rename from drivers/media/video/tlg2300/pd-main.c rename to drivers/media/usb/tlg2300/pd-main.c diff --git a/drivers/media/video/tlg2300/pd-radio.c b/drivers/media/usb/tlg2300/pd-radio.c similarity index 99% rename from drivers/media/video/tlg2300/pd-radio.c rename to drivers/media/usb/tlg2300/pd-radio.c index 4fad1dfb92cf00818bf3ee2c769d0dc59eb7b4dc..25eeb166aa0be81f399e312b28dfab14d10ee5b2 100644 --- a/drivers/media/video/tlg2300/pd-radio.c +++ b/drivers/media/usb/tlg2300/pd-radio.c @@ -348,7 +348,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *vt) { return vt->index > 0 ? -EINVAL : 0; } -static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *va) +static int vidioc_s_audio(struct file *file, void *priv, const struct v4l2_audio *va) { return (va->index != 0) ? -EINVAL : 0; } diff --git a/drivers/media/video/tlg2300/pd-video.c b/drivers/media/usb/tlg2300/pd-video.c similarity index 99% rename from drivers/media/video/tlg2300/pd-video.c rename to drivers/media/usb/tlg2300/pd-video.c index bfbf9e56b0a4e6c86e752b0515a4688986e53713..1f448ac7a496c160d567b1b6c2eeb5b4eabff288 100644 --- a/drivers/media/video/tlg2300/pd-video.c +++ b/drivers/media/usb/tlg2300/pd-video.c @@ -1029,7 +1029,7 @@ static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a) return 0; } -static int vidioc_s_audio(struct file *file, void *fh, struct v4l2_audio *a) +static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *a) { return (0 == a->index) ? 0 : -EINVAL; } diff --git a/drivers/media/video/tlg2300/vendorcmds.h b/drivers/media/usb/tlg2300/vendorcmds.h similarity index 100% rename from drivers/media/video/tlg2300/vendorcmds.h rename to drivers/media/usb/tlg2300/vendorcmds.h diff --git a/drivers/media/video/tm6000/Kconfig b/drivers/media/usb/tm6000/Kconfig similarity index 100% rename from drivers/media/video/tm6000/Kconfig rename to drivers/media/usb/tm6000/Kconfig diff --git a/drivers/media/video/tm6000/Makefile b/drivers/media/usb/tm6000/Makefile similarity index 62% rename from drivers/media/video/tm6000/Makefile rename to drivers/media/usb/tm6000/Makefile index 395515b4a888af254cfdd9020f8127ef3045de13..f2644933b8d1afc8709e137a1207f856dcbf964b 100644 --- a/drivers/media/video/tm6000/Makefile +++ b/drivers/media/usb/tm6000/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_VIDEO_TM6000) += tm6000.o obj-$(CONFIG_VIDEO_TM6000_ALSA) += tm6000-alsa.o obj-$(CONFIG_VIDEO_TM6000_DVB) += tm6000-dvb.o -ccflags-y := -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends diff --git a/drivers/media/video/tm6000/tm6000-alsa.c b/drivers/media/usb/tm6000/tm6000-alsa.c similarity index 99% rename from drivers/media/video/tm6000/tm6000-alsa.c rename to drivers/media/usb/tm6000/tm6000-alsa.c index bd07ec707956d377eae03f3278fa8972e8cf4972..813c1ec5360884274f5d3e31e66f9d38d91d0753 100644 --- a/drivers/media/video/tm6000/tm6000-alsa.c +++ b/drivers/media/usb/tm6000/tm6000-alsa.c @@ -487,10 +487,11 @@ static int tm6000_audio_init(struct tm6000_core *dev) static int tm6000_audio_fini(struct tm6000_core *dev) { - struct snd_tm6000_card *chip = dev->adev; + struct snd_tm6000_card *chip; if (!dev) return 0; + chip = dev->adev; if (!chip) return 0; diff --git a/drivers/media/video/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c similarity index 100% rename from drivers/media/video/tm6000/tm6000-cards.c rename to drivers/media/usb/tm6000/tm6000-cards.c diff --git a/drivers/media/video/tm6000/tm6000-core.c b/drivers/media/usb/tm6000/tm6000-core.c similarity index 100% rename from drivers/media/video/tm6000/tm6000-core.c rename to drivers/media/usb/tm6000/tm6000-core.c diff --git a/drivers/media/video/tm6000/tm6000-dvb.c b/drivers/media/usb/tm6000/tm6000-dvb.c similarity index 100% rename from drivers/media/video/tm6000/tm6000-dvb.c rename to drivers/media/usb/tm6000/tm6000-dvb.c diff --git a/drivers/media/video/tm6000/tm6000-i2c.c b/drivers/media/usb/tm6000/tm6000-i2c.c similarity index 100% rename from drivers/media/video/tm6000/tm6000-i2c.c rename to drivers/media/usb/tm6000/tm6000-i2c.c diff --git a/drivers/media/video/tm6000/tm6000-input.c b/drivers/media/usb/tm6000/tm6000-input.c similarity index 99% rename from drivers/media/video/tm6000/tm6000-input.c rename to drivers/media/usb/tm6000/tm6000-input.c index e80b7e190471293082b3470c6be8156a73d108f8..dffbd4bd47b15d92ffff672189aa2f18e90be4f0 100644 --- a/drivers/media/video/tm6000/tm6000-input.c +++ b/drivers/media/usb/tm6000/tm6000-input.c @@ -319,12 +319,13 @@ static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type) static int __tm6000_ir_int_start(struct rc_dev *rc) { struct tm6000_IR *ir = rc->priv; - struct tm6000_core *dev = ir->dev; + struct tm6000_core *dev; int pipe, size; int err = -ENOMEM; if (!ir) return -ENODEV; + dev = ir->dev; dprintk(2, "%s\n",__func__); diff --git a/drivers/media/video/tm6000/tm6000-regs.h b/drivers/media/usb/tm6000/tm6000-regs.h similarity index 100% rename from drivers/media/video/tm6000/tm6000-regs.h rename to drivers/media/usb/tm6000/tm6000-regs.h diff --git a/drivers/media/video/tm6000/tm6000-stds.c b/drivers/media/usb/tm6000/tm6000-stds.c similarity index 100% rename from drivers/media/video/tm6000/tm6000-stds.c rename to drivers/media/usb/tm6000/tm6000-stds.c diff --git a/drivers/media/video/tm6000/tm6000-usb-isoc.h b/drivers/media/usb/tm6000/tm6000-usb-isoc.h similarity index 100% rename from drivers/media/video/tm6000/tm6000-usb-isoc.h rename to drivers/media/usb/tm6000/tm6000-usb-isoc.h diff --git a/drivers/media/video/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c similarity index 97% rename from drivers/media/video/tm6000/tm6000-video.c rename to drivers/media/usb/tm6000/tm6000-video.c index f7034df94e0a6640a77c0bf0090ab08baeaf1e47..4342cd4f5c8a7ad76cef1730348fb9ece2b1ada0 100644 --- a/drivers/media/video/tm6000/tm6000-video.c +++ b/drivers/media/usb/tm6000/tm6000-video.c @@ -1401,7 +1401,7 @@ static int radio_g_audio(struct file *file, void *priv, } static int radio_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) + const struct v4l2_audio *a) { return 0; } @@ -1448,7 +1448,7 @@ static int radio_queryctrl(struct file *file, void *priv, File operations for the device ------------------------------------------------------------------*/ -static int tm6000_open(struct file *file) +static int __tm6000_open(struct file *file) { struct video_device *vdev = video_devdata(file); struct tm6000_core *dev = video_drvdata(file); @@ -1540,23 +1540,41 @@ static int tm6000_open(struct file *file) return 0; } +static int tm6000_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + int res; + + mutex_lock(vdev->lock); + res = __tm6000_open(file); + mutex_unlock(vdev->lock); + return res; +} + static ssize_t tm6000_read(struct file *file, char __user *data, size_t count, loff_t *pos) { - struct tm6000_fh *fh = file->private_data; + struct tm6000_fh *fh = file->private_data; + struct tm6000_core *dev = fh->dev; if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + int res; + if (!res_get(fh->dev, fh, true)) return -EBUSY; - return videobuf_read_stream(&fh->vb_vidq, data, count, pos, 0, + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + res = videobuf_read_stream(&fh->vb_vidq, data, count, pos, 0, file->f_flags & O_NONBLOCK); + mutex_unlock(&dev->lock); + return res; } return 0; } static unsigned int -tm6000_poll(struct file *file, struct poll_table_struct *wait) +__tm6000_poll(struct file *file, struct poll_table_struct *wait) { struct tm6000_fh *fh = file->private_data; struct tm6000_buffer *buf; @@ -1583,6 +1601,18 @@ tm6000_poll(struct file *file, struct poll_table_struct *wait) return 0; } +static unsigned int tm6000_poll(struct file *file, struct poll_table_struct *wait) +{ + struct tm6000_fh *fh = file->private_data; + struct tm6000_core *dev = fh->dev; + unsigned int res; + + mutex_lock(&dev->lock); + res = __tm6000_poll(file, wait); + mutex_unlock(&dev->lock); + return res; +} + static int tm6000_release(struct file *file) { struct tm6000_fh *fh = file->private_data; @@ -1592,6 +1622,7 @@ static int tm6000_release(struct file *file) dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: close called (dev=%s, users=%d)\n", video_device_node_name(vdev), dev->users); + mutex_lock(&dev->lock); dev->users--; res_free(dev, fh); @@ -1619,6 +1650,7 @@ static int tm6000_release(struct file *file) } kfree(fh); + mutex_unlock(&dev->lock); return 0; } @@ -1626,8 +1658,14 @@ static int tm6000_release(struct file *file) static int tm6000_mmap(struct file *file, struct vm_area_struct * vma) { struct tm6000_fh *fh = file->private_data; + struct tm6000_core *dev = fh->dev; + int res; - return videobuf_mmap_mapper(&fh->vb_vidq, vma); + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + res = videobuf_mmap_mapper(&fh->vb_vidq, vma); + mutex_unlock(&dev->lock); + return res; } static struct v4l2_file_operations tm6000_fops = { @@ -1724,10 +1762,6 @@ static struct video_device *vdev_init(struct tm6000_core *dev, vfd->release = video_device_release; vfd->debug = tm6000_debug; vfd->lock = &dev->lock; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vfd->flags); snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name); diff --git a/drivers/media/video/tm6000/tm6000.h b/drivers/media/usb/tm6000/tm6000.h similarity index 100% rename from drivers/media/video/tm6000/tm6000.h rename to drivers/media/usb/tm6000/tm6000.h diff --git a/drivers/media/dvb/ttusb-budget/Kconfig b/drivers/media/usb/ttusb-budget/Kconfig similarity index 56% rename from drivers/media/dvb/ttusb-budget/Kconfig rename to drivers/media/usb/ttusb-budget/Kconfig index 2663ae39b88692f5eada3b73730b68fc756e7db9..97bad7da689cafccb3a7bd08b5bf6958d400bd12 100644 --- a/drivers/media/dvb/ttusb-budget/Kconfig +++ b/drivers/media/usb/ttusb-budget/Kconfig @@ -1,13 +1,13 @@ config DVB_TTUSB_BUDGET tristate "Technotrend/Hauppauge Nova-USB devices" depends on DVB_CORE && USB && I2C && PCI - select DVB_CX22700 if !DVB_FE_CUSTOMISE - select DVB_TDA1004X if !DVB_FE_CUSTOMISE - select DVB_VES1820 if !DVB_FE_CUSTOMISE - select DVB_TDA8083 if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_STV0297 if !DVB_FE_CUSTOMISE - select DVB_LNBP21 if !DVB_FE_CUSTOMISE + select DVB_CX22700 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT help Support for external USB adapters designed by Technotrend and produced by Hauppauge, shipped under the brand name 'Nova-USB'. diff --git a/drivers/media/usb/ttusb-budget/Makefile b/drivers/media/usb/ttusb-budget/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..f47bbf62dcde131c4e2c91d981732a70b4bfb59a --- /dev/null +++ b/drivers/media/usb/ttusb-budget/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_DVB_TTUSB_BUDGET) += dvb-ttusb-budget.o + +ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c similarity index 100% rename from drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c rename to drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c diff --git a/drivers/media/dvb/ttusb-dec/Kconfig b/drivers/media/usb/ttusb-dec/Kconfig similarity index 100% rename from drivers/media/dvb/ttusb-dec/Kconfig rename to drivers/media/usb/ttusb-dec/Kconfig diff --git a/drivers/media/dvb/ttusb-dec/Makefile b/drivers/media/usb/ttusb-dec/Makefile similarity index 57% rename from drivers/media/dvb/ttusb-dec/Makefile rename to drivers/media/usb/ttusb-dec/Makefile index ed28b5384d20c190b78c3ab66d83119d1288e41b..5352740d2353c92eb0949000bddffb7a77a4d8c7 100644 --- a/drivers/media/dvb/ttusb-dec/Makefile +++ b/drivers/media/usb/ttusb-dec/Makefile @@ -1,3 +1,3 @@ obj-$(CONFIG_DVB_TTUSB_DEC) += ttusb_dec.o ttusbdecfe.o -ccflags-y += -Idrivers/media/dvb/dvb-core/ +ccflags-y += -Idrivers/media/dvb-core/ diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/usb/ttusb-dec/ttusb_dec.c similarity index 100% rename from drivers/media/dvb/ttusb-dec/ttusb_dec.c rename to drivers/media/usb/ttusb-dec/ttusb_dec.c diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/usb/ttusb-dec/ttusbdecfe.c similarity index 100% rename from drivers/media/dvb/ttusb-dec/ttusbdecfe.c rename to drivers/media/usb/ttusb-dec/ttusbdecfe.c diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.h b/drivers/media/usb/ttusb-dec/ttusbdecfe.h similarity index 100% rename from drivers/media/dvb/ttusb-dec/ttusbdecfe.h rename to drivers/media/usb/ttusb-dec/ttusbdecfe.h diff --git a/drivers/media/video/usbvision/Kconfig b/drivers/media/usb/usbvision/Kconfig similarity index 88% rename from drivers/media/video/usbvision/Kconfig rename to drivers/media/usb/usbvision/Kconfig index fc24ef05b3f31cf527b6fc850423cae317ad224b..6b6afc5d8f7e8d3a373cc623382e48ff7e54f27a 100644 --- a/drivers/media/video/usbvision/Kconfig +++ b/drivers/media/usb/usbvision/Kconfig @@ -2,7 +2,7 @@ config VIDEO_USBVISION tristate "USB video devices based on Nogatech NT1003/1004/1005" depends on I2C && VIDEO_V4L2 select VIDEO_TUNER - select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT ---help--- There are more than 50 different USB video devices based on NT1003/1004/1005 USB Bridges. This driver enables using those diff --git a/drivers/media/video/usbvision/Makefile b/drivers/media/usb/usbvision/Makefile similarity index 63% rename from drivers/media/video/usbvision/Makefile rename to drivers/media/usb/usbvision/Makefile index aea1e3b5f06b7c1b1b9c7687a3f0a52f02a29bf0..9b3a5581df4205f240143bbabf64dec4c60ad5ab 100644 --- a/drivers/media/video/usbvision/Makefile +++ b/drivers/media/usb/usbvision/Makefile @@ -2,5 +2,5 @@ usbvision-objs := usbvision-core.o usbvision-video.o usbvision-i2c.o usbvision- obj-$(CONFIG_VIDEO_USBVISION) += usbvision.o -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners +ccflags-y += -Idrivers/media/i2c +ccflags-y += -Idrivers/media/tuners diff --git a/drivers/media/video/usbvision/usbvision-cards.c b/drivers/media/usb/usbvision/usbvision-cards.c similarity index 100% rename from drivers/media/video/usbvision/usbvision-cards.c rename to drivers/media/usb/usbvision/usbvision-cards.c diff --git a/drivers/media/video/usbvision/usbvision-cards.h b/drivers/media/usb/usbvision/usbvision-cards.h similarity index 100% rename from drivers/media/video/usbvision/usbvision-cards.h rename to drivers/media/usb/usbvision/usbvision-cards.h diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/usb/usbvision/usbvision-core.c similarity index 100% rename from drivers/media/video/usbvision/usbvision-core.c rename to drivers/media/usb/usbvision/usbvision-core.c diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/usb/usbvision/usbvision-i2c.c similarity index 100% rename from drivers/media/video/usbvision/usbvision-i2c.c rename to drivers/media/usb/usbvision/usbvision-i2c.c diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c similarity index 97% rename from drivers/media/video/usbvision/usbvision-video.c rename to drivers/media/usb/usbvision/usbvision-video.c index 9bd8f084f3489671143d879218d29495d66753c0..f67018ed3795a349b95ceb8efbc22689f62c204d 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/usb/usbvision/usbvision-video.c @@ -349,6 +349,8 @@ static int usbvision_v4l2_open(struct file *file) PDEBUG(DBG_IO, "open"); + if (mutex_lock_interruptible(&usbvision->v4l2_lock)) + return -ERESTARTSYS; usbvision_reset_power_off_timer(usbvision); if (usbvision->user) @@ -402,6 +404,7 @@ static int usbvision_v4l2_open(struct file *file) /* prepare queues */ usbvision_empty_framequeues(usbvision); + mutex_unlock(&usbvision->v4l2_lock); PDEBUG(DBG_IO, "success"); return err_code; @@ -421,6 +424,7 @@ static int usbvision_v4l2_close(struct file *file) PDEBUG(DBG_IO, "close"); + mutex_lock(&usbvision->v4l2_lock); usbvision_audio_off(usbvision); usbvision_restart_isoc(usbvision); usbvision_stop_isoc(usbvision); @@ -443,6 +447,7 @@ static int usbvision_v4l2_close(struct file *file) printk(KERN_INFO "%s: Final disconnect\n", __func__); usbvision_release(usbvision); } + mutex_unlock(&usbvision->v4l2_lock); PDEBUG(DBG_IO, "success"); return 0; @@ -679,7 +684,7 @@ static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) } static int vidioc_s_audio(struct file *file, void *fh, - struct v4l2_audio *a) + const struct v4l2_audio *a) { if (a->index) return -EINVAL; @@ -956,7 +961,7 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, return 0; } -static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf, +static ssize_t usbvision_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct usb_usbvision *usbvision = video_drvdata(file); @@ -1060,7 +1065,20 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf, return count; } -static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma) +static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int res; + + if (mutex_lock_interruptible(&usbvision->v4l2_lock)) + return -ERESTARTSYS; + res = usbvision_read(file, buf, count, ppos); + mutex_unlock(&usbvision->v4l2_lock); + return res; +} + +static int usbvision_mmap(struct file *file, struct vm_area_struct *vma) { unsigned long size = vma->vm_end - vma->vm_start, start = vma->vm_start; @@ -1107,6 +1125,17 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma) return 0; } +static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int res; + + if (mutex_lock_interruptible(&usbvision->v4l2_lock)) + return -ERESTARTSYS; + res = usbvision_mmap(file, vma); + mutex_unlock(&usbvision->v4l2_lock); + return res; +} /* * Here comes the stuff for radio on usbvision based devices @@ -1119,6 +1148,8 @@ static int usbvision_radio_open(struct file *file) PDEBUG(DBG_IO, "%s:", __func__); + if (mutex_lock_interruptible(&usbvision->v4l2_lock)) + return -ERESTARTSYS; if (usbvision->user) { dev_err(&usbvision->rdev->dev, "%s: Someone tried to open an already opened USBVision Radio!\n", @@ -1156,6 +1187,7 @@ static int usbvision_radio_open(struct file *file) } } out: + mutex_unlock(&usbvision->v4l2_lock); return err_code; } @@ -1167,6 +1199,7 @@ static int usbvision_radio_close(struct file *file) PDEBUG(DBG_IO, ""); + mutex_lock(&usbvision->v4l2_lock); /* Set packet size to 0 */ usbvision->iface_alt = 0; err_code = usb_set_interface(usbvision->dev, usbvision->iface, @@ -1186,6 +1219,7 @@ static int usbvision_radio_close(struct file *file) usbvision_release(usbvision); } + mutex_unlock(&usbvision->v4l2_lock); PDEBUG(DBG_IO, "success"); return err_code; } @@ -1296,10 +1330,6 @@ static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision, if (NULL == vdev) return NULL; *vdev = *vdev_template; - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags); vdev->lock = &usbvision->v4l2_lock; vdev->v4l2_dev = &usbvision->v4l2_dev; snprintf(vdev->name, sizeof(vdev->name), "%s", name); diff --git a/drivers/media/video/usbvision/usbvision.h b/drivers/media/usb/usbvision/usbvision.h similarity index 100% rename from drivers/media/video/usbvision/usbvision.h rename to drivers/media/usb/usbvision/usbvision.h diff --git a/drivers/media/video/uvc/Kconfig b/drivers/media/usb/uvc/Kconfig similarity index 100% rename from drivers/media/video/uvc/Kconfig rename to drivers/media/usb/uvc/Kconfig diff --git a/drivers/media/video/uvc/Makefile b/drivers/media/usb/uvc/Makefile similarity index 100% rename from drivers/media/video/uvc/Makefile rename to drivers/media/usb/uvc/Makefile diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c similarity index 100% rename from drivers/media/video/uvc/uvc_ctrl.c rename to drivers/media/usb/uvc/uvc_ctrl.c diff --git a/drivers/media/video/uvc/uvc_debugfs.c b/drivers/media/usb/uvc/uvc_debugfs.c similarity index 100% rename from drivers/media/video/uvc/uvc_debugfs.c rename to drivers/media/usb/uvc/uvc_debugfs.c diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c similarity index 98% rename from drivers/media/video/uvc/uvc_driver.c rename to drivers/media/usb/uvc/uvc_driver.c index 1d131720b6d71c5ea56b34fb598223ca468f9348..5967081747ceb974814a5818ad8cccb43aacf64a 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -11,18 +11,6 @@ * */ -/* - * This driver aims to support video input and ouput devices compliant with the - * 'USB Video Class' specification. - * - * The driver doesn't support the deprecated v4l1 interface. It implements the - * mmap capture method only, and doesn't do any image format conversion in - * software. If your user-space application doesn't support YUYV or MJPEG, fix - * it :-). Please note that the MJPEG data have been stripped from their - * Huffman tables (DHT marker), you will need to add it back if your JPEG - * codec can't handle MJPEG data. - */ - #include #include #include @@ -95,12 +83,27 @@ static struct uvc_format_desc uvc_fmts[] = { .fcc = V4L2_PIX_FMT_UYVY, }, { - .name = "Greyscale (8-bit)", + .name = "Greyscale 8-bit (Y800)", .guid = UVC_GUID_FORMAT_Y800, .fcc = V4L2_PIX_FMT_GREY, }, { - .name = "Greyscale (16-bit)", + .name = "Greyscale 8-bit (Y8 )", + .guid = UVC_GUID_FORMAT_Y8, + .fcc = V4L2_PIX_FMT_GREY, + }, + { + .name = "Greyscale 10-bit (Y10 )", + .guid = UVC_GUID_FORMAT_Y10, + .fcc = V4L2_PIX_FMT_Y10, + }, + { + .name = "Greyscale 12-bit (Y12 )", + .guid = UVC_GUID_FORMAT_Y12, + .fcc = V4L2_PIX_FMT_Y12, + }, + { + .name = "Greyscale 16-bit (Y16 )", .guid = UVC_GUID_FORMAT_Y16, .fcc = V4L2_PIX_FMT_Y16, }, @@ -1719,6 +1722,8 @@ static int uvc_register_video(struct uvc_device *dev, vdev->v4l2_dev = &dev->vdev; vdev->fops = &uvc_fops; vdev->release = uvc_release; + if (stream->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) + vdev->vfl_dir = VFL_DIR_TX; strlcpy(vdev->name, dev->name, sizeof vdev->name); /* Set the driver data before calling video_register_device, otherwise @@ -2212,6 +2217,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_FIX_BANDWIDTH }, + /* Ophir Optronics - SPCAM 620U */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x0bd3, + .idProduct = 0x0555, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, /* MT6227 */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/drivers/media/video/uvc/uvc_entity.c b/drivers/media/usb/uvc/uvc_entity.c similarity index 100% rename from drivers/media/video/uvc/uvc_entity.c rename to drivers/media/usb/uvc/uvc_entity.c diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/usb/uvc/uvc_isight.c similarity index 100% rename from drivers/media/video/uvc/uvc_isight.c rename to drivers/media/usb/uvc/uvc_isight.c diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/usb/uvc/uvc_queue.c similarity index 100% rename from drivers/media/video/uvc/uvc_queue.c rename to drivers/media/usb/uvc/uvc_queue.c diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c similarity index 100% rename from drivers/media/video/uvc/uvc_status.c rename to drivers/media/usb/uvc/uvc_status.c diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c similarity index 100% rename from drivers/media/video/uvc/uvc_v4l2.c rename to drivers/media/usb/uvc/uvc_v4l2.c diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c similarity index 98% rename from drivers/media/video/uvc/uvc_video.c rename to drivers/media/usb/uvc/uvc_video.c index 7ac4347ca09e72dc4bb2abb751779f3053a338c7..1c15b4227bdbd3886ff0e2db32ad00d73b10524e 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -1438,6 +1438,26 @@ static void uvc_uninit_video(struct uvc_streaming *stream, int free_buffers) uvc_free_urb_buffers(stream); } +/* + * Compute the maximum number of bytes per interval for an endpoint. + */ +static unsigned int uvc_endpoint_max_bpi(struct usb_device *dev, + struct usb_host_endpoint *ep) +{ + u16 psize; + + switch (dev->speed) { + case USB_SPEED_SUPER: + return ep->ss_ep_comp.wBytesPerInterval; + case USB_SPEED_HIGH: + psize = usb_endpoint_maxp(&ep->desc); + return (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + default: + psize = usb_endpoint_maxp(&ep->desc); + return psize & 0x07ff; + } +} + /* * Initialize isochronous URBs and allocate transfer buffers. The packet size * is given by the endpoint. @@ -1450,8 +1470,7 @@ static int uvc_init_video_isoc(struct uvc_streaming *stream, u16 psize; u32 size; - psize = le16_to_cpu(ep->desc.wMaxPacketSize); - psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + psize = uvc_endpoint_max_bpi(stream->dev->udev, ep); size = stream->ctrl.dwMaxVideoFrameSize; npackets = uvc_alloc_urb_buffers(stream, size, psize, gfp_flags); @@ -1506,7 +1525,7 @@ static int uvc_init_video_bulk(struct uvc_streaming *stream, u16 psize; u32 size; - psize = le16_to_cpu(ep->desc.wMaxPacketSize) & 0x07ff; + psize = usb_endpoint_maxp(&ep->desc) & 0x7ff; size = stream->ctrl.dwMaxPayloadTransferSize; stream->bulk.max_payload_size = size; @@ -1567,7 +1586,7 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) if (intf->num_altsetting > 1) { struct usb_host_endpoint *best_ep = NULL; - unsigned int best_psize = 3 * 1024; + unsigned int best_psize = UINT_MAX; unsigned int bandwidth; unsigned int uninitialized_var(altsetting); int intfnum = stream->intfnum; @@ -1595,8 +1614,7 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) continue; /* Check if the bandwidth is high enough. */ - psize = le16_to_cpu(ep->desc.wMaxPacketSize); - psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + psize = uvc_endpoint_max_bpi(stream->dev->udev, ep); if (psize >= bandwidth && psize <= best_psize) { altsetting = alts->desc.bAlternateSetting; best_psize = psize; diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h similarity index 98% rename from drivers/media/video/uvc/uvcvideo.h rename to drivers/media/usb/uvc/uvcvideo.h index 7c3d082505b78b6fc189fc631ee11cacab603447..3764040475bbe75647cd7b14f3a66f1e6383aef7 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -79,6 +79,15 @@ #define UVC_GUID_FORMAT_Y800 \ { 'Y', '8', '0', '0', 0x00, 0x00, 0x10, 0x00, \ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y8 \ + { 'Y', '8', ' ', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y10 \ + { 'Y', '1', '0', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y12 \ + { 'Y', '1', '2', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} #define UVC_GUID_FORMAT_Y16 \ { 'Y', '1', '6', ' ', 0x00, 0x00, 0x10, 0x00, \ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} diff --git a/drivers/media/usb/zr364xx/Kconfig b/drivers/media/usb/zr364xx/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..0f585662881dbb94ca7af8e69b66599eaf57e172 --- /dev/null +++ b/drivers/media/usb/zr364xx/Kconfig @@ -0,0 +1,14 @@ +config USB_ZR364XX + tristate "USB ZR364XX Camera support" + depends on VIDEO_V4L2 + select VIDEOBUF_GEN + select VIDEOBUF_VMALLOC + ---help--- + Say Y here if you want to connect this type of camera to your + computer's USB port. + See for more info + and list of supported cameras. + + To compile this driver as a module, choose M here: the + module will be called zr364xx. + diff --git a/drivers/media/usb/zr364xx/Makefile b/drivers/media/usb/zr364xx/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..a5777883a1f892c34fe47f6218da4b0dc459d918 --- /dev/null +++ b/drivers/media/usb/zr364xx/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_USB_ZR364XX) += zr364xx.o + diff --git a/drivers/media/video/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c similarity index 100% rename from drivers/media/video/zr364xx.c rename to drivers/media/usb/zr364xx/zr364xx.c diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..0c54e19d9944271bca76d9658363aea34aaccd5a --- /dev/null +++ b/drivers/media/v4l2-core/Kconfig @@ -0,0 +1,81 @@ +# +# Generic video config states +# + +# Enable the V4L2 core and API +config VIDEO_V4L2 + tristate + depends on (I2C || I2C=n) && VIDEO_DEV + default (I2C || I2C=n) && VIDEO_DEV + +config VIDEO_ADV_DEBUG + bool "Enable advanced debug functionality on V4L2 drivers" + default n + ---help--- + Say Y here to enable advanced debugging functionality on some + V4L devices. + In doubt, say N. + +config VIDEO_FIXED_MINOR_RANGES + bool "Enable old-style fixed minor ranges on drivers/video devices" + default n + ---help--- + Say Y here to enable the old-style fixed-range minor assignments. + Only useful if you rely on the old behavior and use mknod instead of udev. + + When in doubt, say N. + +# Used by drivers that need tuner.ko +config VIDEO_TUNER + tristate + depends on MEDIA_TUNER + +# Used by drivers that need v4l2-mem2mem.ko +config V4L2_MEM2MEM_DEV + tristate + depends on VIDEOBUF2_CORE + +# Used by drivers that need Videobuf modules +config VIDEOBUF_GEN + tristate + +config VIDEOBUF_DMA_SG + tristate + depends on HAS_DMA + select VIDEOBUF_GEN + +config VIDEOBUF_VMALLOC + tristate + select VIDEOBUF_GEN + +config VIDEOBUF_DMA_CONTIG + tristate + depends on HAS_DMA + select VIDEOBUF_GEN + +config VIDEOBUF_DVB + tristate + select VIDEOBUF_GEN + +# Used by drivers that need Videobuf2 modules +config VIDEOBUF2_CORE + tristate + +config VIDEOBUF2_MEMOPS + tristate + +config VIDEOBUF2_DMA_CONTIG + tristate + select VIDEOBUF2_CORE + select VIDEOBUF2_MEMOPS + +config VIDEOBUF2_VMALLOC + tristate + select VIDEOBUF2_CORE + select VIDEOBUF2_MEMOPS + +config VIDEOBUF2_DMA_SG + tristate + #depends on HAS_DMA + select VIDEOBUF2_CORE + select VIDEOBUF2_MEMOPS diff --git a/drivers/media/v4l2-core/Makefile b/drivers/media/v4l2-core/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..c2d61d4f03d117b5b89107f5411e2693dbe68993 --- /dev/null +++ b/drivers/media/v4l2-core/Makefile @@ -0,0 +1,35 @@ +# +# Makefile for the V4L2 core +# + +tuner-objs := tuner-core.o + +videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \ + v4l2-event.o v4l2-ctrls.o v4l2-subdev.o +ifeq ($(CONFIG_COMPAT),y) + videodev-objs += v4l2-compat-ioctl32.o +endif + +obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-int-device.o +obj-$(CONFIG_VIDEO_V4L2) += v4l2-common.o + +obj-$(CONFIG_VIDEO_TUNER) += tuner.o + +obj-$(CONFIG_V4L2_MEM2MEM_DEV) += v4l2-mem2mem.o + +obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o +obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o +obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o +obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o +obj-$(CONFIG_VIDEOBUF_DVB) += videobuf-dvb.o + +obj-$(CONFIG_VIDEOBUF2_CORE) += videobuf2-core.o +obj-$(CONFIG_VIDEOBUF2_MEMOPS) += videobuf2-memops.o +obj-$(CONFIG_VIDEOBUF2_VMALLOC) += videobuf2-vmalloc.o +obj-$(CONFIG_VIDEOBUF2_DMA_CONTIG) += videobuf2-dma-contig.o +obj-$(CONFIG_VIDEOBUF2_DMA_SG) += videobuf2-dma-sg.o + +ccflags-y += -I$(srctree)/drivers/media/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb-frontends +ccflags-y += -I$(srctree)/drivers/media/tuners + diff --git a/drivers/media/video/tuner-core.c b/drivers/media/v4l2-core/tuner-core.c similarity index 100% rename from drivers/media/video/tuner-core.c rename to drivers/media/v4l2-core/tuner-core.c diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c similarity index 62% rename from drivers/media/video/v4l2-common.c rename to drivers/media/v4l2-core/v4l2-common.c index 1baec8393306de0c1c781c88987615a24701c91f..f995dd31151d0cc36bce91110e8ca3c0443c0138 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/v4l2-core/v4l2-common.c @@ -418,7 +418,7 @@ EXPORT_SYMBOL_GPL(v4l2_i2c_tuner_addrs); #if defined(CONFIG_SPI) -/* Load a spi sub-device. */ +/* Load an spi sub-device. */ void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi, const struct v4l2_subdev_ops *ops) @@ -443,7 +443,7 @@ struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev, BUG_ON(!v4l2_dev); - if (info->modalias) + if (info->modalias[0]) request_module(info->modalias); spi = spi_new_device(master, info); @@ -597,6 +597,364 @@ int v4l_fill_dv_preset_info(u32 preset, struct v4l2_dv_enum_preset *info) } EXPORT_SYMBOL_GPL(v4l_fill_dv_preset_info); +/** + * v4l_match_dv_timings - check if two timings match + * @t1 - compare this v4l2_dv_timings struct... + * @t2 - with this struct. + * @pclock_delta - the allowed pixelclock deviation. + * + * Compare t1 with t2 with a given margin of error for the pixelclock. + */ +bool v4l_match_dv_timings(const struct v4l2_dv_timings *t1, + const struct v4l2_dv_timings *t2, + unsigned pclock_delta) +{ + if (t1->type != t2->type || t1->type != V4L2_DV_BT_656_1120) + return false; + if (t1->bt.width == t2->bt.width && + t1->bt.height == t2->bt.height && + t1->bt.interlaced == t2->bt.interlaced && + t1->bt.polarities == t2->bt.polarities && + t1->bt.pixelclock >= t2->bt.pixelclock - pclock_delta && + t1->bt.pixelclock <= t2->bt.pixelclock + pclock_delta && + t1->bt.hfrontporch == t2->bt.hfrontporch && + t1->bt.vfrontporch == t2->bt.vfrontporch && + t1->bt.vsync == t2->bt.vsync && + t1->bt.vbackporch == t2->bt.vbackporch && + (!t1->bt.interlaced || + (t1->bt.il_vfrontporch == t2->bt.il_vfrontporch && + t1->bt.il_vsync == t2->bt.il_vsync && + t1->bt.il_vbackporch == t2->bt.il_vbackporch))) + return true; + return false; +} +EXPORT_SYMBOL_GPL(v4l_match_dv_timings); + +/* + * CVT defines + * Based on Coordinated Video Timings Standard + * version 1.1 September 10, 2003 + */ + +#define CVT_PXL_CLK_GRAN 250000 /* pixel clock granularity */ + +/* Normal blanking */ +#define CVT_MIN_V_BPORCH 7 /* lines */ +#define CVT_MIN_V_PORCH_RND 3 /* lines */ +#define CVT_MIN_VSYNC_BP 550 /* min time of vsync + back porch (us) */ + +/* Normal blanking for CVT uses GTF to calculate horizontal blanking */ +#define CVT_CELL_GRAN 8 /* character cell granularity */ +#define CVT_M 600 /* blanking formula gradient */ +#define CVT_C 40 /* blanking formula offset */ +#define CVT_K 128 /* blanking formula scaling factor */ +#define CVT_J 20 /* blanking formula scaling factor */ +#define CVT_C_PRIME (((CVT_C - CVT_J) * CVT_K / 256) + CVT_J) +#define CVT_M_PRIME (CVT_K * CVT_M / 256) + +/* Reduced Blanking */ +#define CVT_RB_MIN_V_BPORCH 7 /* lines */ +#define CVT_RB_V_FPORCH 3 /* lines */ +#define CVT_RB_MIN_V_BLANK 460 /* us */ +#define CVT_RB_H_SYNC 32 /* pixels */ +#define CVT_RB_H_BPORCH 80 /* pixels */ +#define CVT_RB_H_BLANK 160 /* pixels */ + +/** v4l2_detect_cvt - detect if the given timings follow the CVT standard + * @frame_height - the total height of the frame (including blanking) in lines. + * @hfreq - the horizontal frequency in Hz. + * @vsync - the height of the vertical sync in lines. + * @polarities - the horizontal and vertical polarities (same as struct + * v4l2_bt_timings polarities). + * @fmt - the resulting timings. + * + * This function will attempt to detect if the given values correspond to a + * valid CVT format. If so, then it will return true, and fmt will be filled + * in with the found CVT timings. + */ +bool v4l2_detect_cvt(unsigned frame_height, unsigned hfreq, unsigned vsync, + u32 polarities, struct v4l2_dv_timings *fmt) +{ + int v_fp, v_bp, h_fp, h_bp, hsync; + int frame_width, image_height, image_width; + bool reduced_blanking; + unsigned pix_clk; + + if (vsync < 4 || vsync > 7) + return false; + + if (polarities == V4L2_DV_VSYNC_POS_POL) + reduced_blanking = false; + else if (polarities == V4L2_DV_HSYNC_POS_POL) + reduced_blanking = true; + else + return false; + + /* Vertical */ + if (reduced_blanking) { + v_fp = CVT_RB_V_FPORCH; + v_bp = (CVT_RB_MIN_V_BLANK * hfreq + 999999) / 1000000; + v_bp -= vsync + v_fp; + + if (v_bp < CVT_RB_MIN_V_BPORCH) + v_bp = CVT_RB_MIN_V_BPORCH; + } else { + v_fp = CVT_MIN_V_PORCH_RND; + v_bp = (CVT_MIN_VSYNC_BP * hfreq + 999999) / 1000000 - vsync; + + if (v_bp < CVT_MIN_V_BPORCH) + v_bp = CVT_MIN_V_BPORCH; + } + image_height = (frame_height - v_fp - vsync - v_bp + 1) & ~0x1; + + /* Aspect ratio based on vsync */ + switch (vsync) { + case 4: + image_width = (image_height * 4) / 3; + break; + case 5: + image_width = (image_height * 16) / 9; + break; + case 6: + image_width = (image_height * 16) / 10; + break; + case 7: + /* special case */ + if (image_height == 1024) + image_width = (image_height * 5) / 4; + else if (image_height == 768) + image_width = (image_height * 15) / 9; + else + return false; + break; + default: + return false; + } + + image_width = image_width & ~7; + + /* Horizontal */ + if (reduced_blanking) { + pix_clk = (image_width + CVT_RB_H_BLANK) * hfreq; + pix_clk = (pix_clk / CVT_PXL_CLK_GRAN) * CVT_PXL_CLK_GRAN; + + h_bp = CVT_RB_H_BPORCH; + hsync = CVT_RB_H_SYNC; + h_fp = CVT_RB_H_BLANK - h_bp - hsync; + + frame_width = image_width + CVT_RB_H_BLANK; + } else { + int h_blank; + unsigned ideal_duty_cycle = CVT_C_PRIME - (CVT_M_PRIME * 1000) / hfreq; + + h_blank = (image_width * ideal_duty_cycle + (100 - ideal_duty_cycle) / 2) / + (100 - ideal_duty_cycle); + h_blank = h_blank - h_blank % (2 * CVT_CELL_GRAN); + + if (h_blank * 100 / image_width < 20) { + h_blank = image_width / 5; + h_blank = (h_blank + 0x7) & ~0x7; + } + + pix_clk = (image_width + h_blank) * hfreq; + pix_clk = (pix_clk / CVT_PXL_CLK_GRAN) * CVT_PXL_CLK_GRAN; + + h_bp = h_blank / 2; + frame_width = image_width + h_blank; + + hsync = (frame_width * 8 + 50) / 100; + hsync = hsync - hsync % CVT_CELL_GRAN; + h_fp = h_blank - hsync - h_bp; + } + + fmt->bt.polarities = polarities; + fmt->bt.width = image_width; + fmt->bt.height = image_height; + fmt->bt.hfrontporch = h_fp; + fmt->bt.vfrontporch = v_fp; + fmt->bt.hsync = hsync; + fmt->bt.vsync = vsync; + fmt->bt.hbackporch = frame_width - image_width - h_fp - hsync; + fmt->bt.vbackporch = frame_height - image_height - v_fp - vsync; + fmt->bt.pixelclock = pix_clk; + fmt->bt.standards = V4L2_DV_BT_STD_CVT; + if (reduced_blanking) + fmt->bt.flags |= V4L2_DV_FL_REDUCED_BLANKING; + return true; +} +EXPORT_SYMBOL_GPL(v4l2_detect_cvt); + +/* + * GTF defines + * Based on Generalized Timing Formula Standard + * Version 1.1 September 2, 1999 + */ + +#define GTF_PXL_CLK_GRAN 250000 /* pixel clock granularity */ + +#define GTF_MIN_VSYNC_BP 550 /* min time of vsync + back porch (us) */ +#define GTF_V_FP 1 /* vertical front porch (lines) */ +#define GTF_CELL_GRAN 8 /* character cell granularity */ + +/* Default */ +#define GTF_D_M 600 /* blanking formula gradient */ +#define GTF_D_C 40 /* blanking formula offset */ +#define GTF_D_K 128 /* blanking formula scaling factor */ +#define GTF_D_J 20 /* blanking formula scaling factor */ +#define GTF_D_C_PRIME ((((GTF_D_C - GTF_D_J) * GTF_D_K) / 256) + GTF_D_J) +#define GTF_D_M_PRIME ((GTF_D_K * GTF_D_M) / 256) + +/* Secondary */ +#define GTF_S_M 3600 /* blanking formula gradient */ +#define GTF_S_C 40 /* blanking formula offset */ +#define GTF_S_K 128 /* blanking formula scaling factor */ +#define GTF_S_J 35 /* blanking formula scaling factor */ +#define GTF_S_C_PRIME ((((GTF_S_C - GTF_S_J) * GTF_S_K) / 256) + GTF_S_J) +#define GTF_S_M_PRIME ((GTF_S_K * GTF_S_M) / 256) + +/** v4l2_detect_gtf - detect if the given timings follow the GTF standard + * @frame_height - the total height of the frame (including blanking) in lines. + * @hfreq - the horizontal frequency in Hz. + * @vsync - the height of the vertical sync in lines. + * @polarities - the horizontal and vertical polarities (same as struct + * v4l2_bt_timings polarities). + * @aspect - preferred aspect ratio. GTF has no method of determining the + * aspect ratio in order to derive the image width from the + * image height, so it has to be passed explicitly. Usually + * the native screen aspect ratio is used for this. If it + * is not filled in correctly, then 16:9 will be assumed. + * @fmt - the resulting timings. + * + * This function will attempt to detect if the given values correspond to a + * valid GTF format. If so, then it will return true, and fmt will be filled + * in with the found GTF timings. + */ +bool v4l2_detect_gtf(unsigned frame_height, + unsigned hfreq, + unsigned vsync, + u32 polarities, + struct v4l2_fract aspect, + struct v4l2_dv_timings *fmt) +{ + int pix_clk; + int v_fp, v_bp, h_fp, h_bp, hsync; + int frame_width, image_height, image_width; + bool default_gtf; + int h_blank; + + if (vsync != 3) + return false; + + if (polarities == V4L2_DV_VSYNC_POS_POL) + default_gtf = true; + else if (polarities == V4L2_DV_HSYNC_POS_POL) + default_gtf = false; + else + return false; + + /* Vertical */ + v_fp = GTF_V_FP; + v_bp = (GTF_MIN_VSYNC_BP * hfreq + 999999) / 1000000 - vsync; + image_height = (frame_height - v_fp - vsync - v_bp + 1) & ~0x1; + + if (aspect.numerator == 0 || aspect.denominator == 0) { + aspect.numerator = 16; + aspect.denominator = 9; + } + image_width = ((image_height * aspect.numerator) / aspect.denominator); + + /* Horizontal */ + if (default_gtf) + h_blank = ((image_width * GTF_D_C_PRIME * hfreq) - + (image_width * GTF_D_M_PRIME * 1000) + + (hfreq * (100 - GTF_D_C_PRIME) + GTF_D_M_PRIME * 1000) / 2) / + (hfreq * (100 - GTF_D_C_PRIME) + GTF_D_M_PRIME * 1000); + else + h_blank = ((image_width * GTF_S_C_PRIME * hfreq) - + (image_width * GTF_S_M_PRIME * 1000) + + (hfreq * (100 - GTF_S_C_PRIME) + GTF_S_M_PRIME * 1000) / 2) / + (hfreq * (100 - GTF_S_C_PRIME) + GTF_S_M_PRIME * 1000); + + h_blank = h_blank - h_blank % (2 * GTF_CELL_GRAN); + frame_width = image_width + h_blank; + + pix_clk = (image_width + h_blank) * hfreq; + pix_clk = pix_clk / GTF_PXL_CLK_GRAN * GTF_PXL_CLK_GRAN; + + hsync = (frame_width * 8 + 50) / 100; + hsync = hsync - hsync % GTF_CELL_GRAN; + + h_fp = h_blank / 2 - hsync; + h_bp = h_blank / 2; + + fmt->bt.polarities = polarities; + fmt->bt.width = image_width; + fmt->bt.height = image_height; + fmt->bt.hfrontporch = h_fp; + fmt->bt.vfrontporch = v_fp; + fmt->bt.hsync = hsync; + fmt->bt.vsync = vsync; + fmt->bt.hbackporch = frame_width - image_width - h_fp - hsync; + fmt->bt.vbackporch = frame_height - image_height - v_fp - vsync; + fmt->bt.pixelclock = pix_clk; + fmt->bt.standards = V4L2_DV_BT_STD_GTF; + if (!default_gtf) + fmt->bt.flags |= V4L2_DV_FL_REDUCED_BLANKING; + return true; +} +EXPORT_SYMBOL_GPL(v4l2_detect_gtf); + +/** v4l2_calc_aspect_ratio - calculate the aspect ratio based on bytes + * 0x15 and 0x16 from the EDID. + * @hor_landscape - byte 0x15 from the EDID. + * @vert_portrait - byte 0x16 from the EDID. + * + * Determines the aspect ratio from the EDID. + * See VESA Enhanced EDID standard, release A, rev 2, section 3.6.2: + * "Horizontal and Vertical Screen Size or Aspect Ratio" + */ +struct v4l2_fract v4l2_calc_aspect_ratio(u8 hor_landscape, u8 vert_portrait) +{ + struct v4l2_fract aspect = { 16, 9 }; + u32 tmp; + u8 ratio; + + /* Nothing filled in, fallback to 16:9 */ + if (!hor_landscape && !vert_portrait) + return aspect; + /* Both filled in, so they are interpreted as the screen size in cm */ + if (hor_landscape && vert_portrait) { + aspect.numerator = hor_landscape; + aspect.denominator = vert_portrait; + return aspect; + } + /* Only one is filled in, so interpret them as a ratio: + (val + 99) / 100 */ + ratio = hor_landscape | vert_portrait; + /* Change some rounded values into the exact aspect ratio */ + if (ratio == 79) { + aspect.numerator = 16; + aspect.denominator = 9; + } else if (ratio == 34) { + aspect.numerator = 4; + aspect.numerator = 3; + } else if (ratio == 68) { + aspect.numerator = 15; + aspect.numerator = 9; + } else { + aspect.numerator = hor_landscape + 99; + aspect.denominator = 100; + } + if (hor_landscape) + return aspect; + /* The aspect ratio is for portrait, so swap numerator and denominator */ + tmp = aspect.denominator; + aspect.denominator = aspect.numerator; + aspect.numerator = tmp; + return aspect; +} +EXPORT_SYMBOL_GPL(v4l2_calc_aspect_ratio); + const struct v4l2_frmsize_discrete *v4l2_find_nearest_format( const struct v4l2_discrete_probe *probe, s32 width, s32 height) diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c similarity index 94% rename from drivers/media/video/v4l2-compat-ioctl32.c rename to drivers/media/v4l2-core/v4l2-compat-ioctl32.c index 9ebd5c540d10feab78df929f39b8e64b1690f17f..83ffb6436baf67e22f7308acae67966dbfef6094 100644 --- a/drivers/media/video/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -194,10 +195,6 @@ static int __get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __us case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: return get_v4l2_sliced_vbi_format(&kp->fmt.sliced, &up->fmt.sliced); - case V4L2_BUF_TYPE_PRIVATE: - if (copy_from_user(kp, up, sizeof(kp->fmt.raw_data))) - return -EFAULT; - return 0; default: printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n", kp->type); @@ -240,10 +237,6 @@ static int __put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __us case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: return put_v4l2_sliced_vbi_format(&kp->fmt.sliced, &up->fmt.sliced); - case V4L2_BUF_TYPE_PRIVATE: - if (copy_to_user(up, kp, sizeof(up->fmt.raw_data))) - return -EFAULT; - return 0; default: printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n", kp->type); @@ -729,6 +722,44 @@ static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *u return 0; } +struct v4l2_subdev_edid32 { + __u32 pad; + __u32 start_block; + __u32 blocks; + __u32 reserved[5]; + compat_caddr_t edid; +}; + +static int get_v4l2_subdev_edid32(struct v4l2_subdev_edid *kp, struct v4l2_subdev_edid32 __user *up) +{ + u32 tmp; + + if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_subdev_edid32)) || + get_user(kp->pad, &up->pad) || + get_user(kp->start_block, &up->start_block) || + get_user(kp->blocks, &up->blocks) || + get_user(tmp, &up->edid) || + copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved))) + return -EFAULT; + kp->edid = compat_ptr(tmp); + return 0; +} + +static int put_v4l2_subdev_edid32(struct v4l2_subdev_edid *kp, struct v4l2_subdev_edid32 __user *up) +{ + u32 tmp = (u32)((unsigned long)kp->edid); + + if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_subdev_edid32)) || + put_user(kp->pad, &up->pad) || + put_user(kp->start_block, &up->start_block) || + put_user(kp->blocks, &up->blocks) || + put_user(tmp, &up->edid) || + copy_to_user(kp->reserved, up->reserved, sizeof(kp->reserved))) + return -EFAULT; + return 0; +} + + #define VIDIOC_G_FMT32 _IOWR('V', 4, struct v4l2_format32) #define VIDIOC_S_FMT32 _IOWR('V', 5, struct v4l2_format32) #define VIDIOC_QUERYBUF32 _IOWR('V', 9, struct v4l2_buffer32) @@ -738,6 +769,8 @@ static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *u #define VIDIOC_DQBUF32 _IOWR('V', 17, struct v4l2_buffer32) #define VIDIOC_ENUMSTD32 _IOWR('V', 25, struct v4l2_standard32) #define VIDIOC_ENUMINPUT32 _IOWR('V', 26, struct v4l2_input32) +#define VIDIOC_SUBDEV_G_EDID32 _IOWR('V', 63, struct v4l2_subdev_edid32) +#define VIDIOC_SUBDEV_S_EDID32 _IOWR('V', 64, struct v4l2_subdev_edid32) #define VIDIOC_TRY_FMT32 _IOWR('V', 64, struct v4l2_format32) #define VIDIOC_G_EXT_CTRLS32 _IOWR('V', 71, struct v4l2_ext_controls32) #define VIDIOC_S_EXT_CTRLS32 _IOWR('V', 72, struct v4l2_ext_controls32) @@ -765,6 +798,7 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar struct v4l2_ext_controls v2ecs; struct v4l2_event v2ev; struct v4l2_create_buffers v2crt; + struct v4l2_subdev_edid v2edid; unsigned long vx; int vi; } karg; @@ -797,6 +831,8 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar case VIDIOC_S_OUTPUT32: cmd = VIDIOC_S_OUTPUT; break; case VIDIOC_CREATE_BUFS32: cmd = VIDIOC_CREATE_BUFS; break; case VIDIOC_PREPARE_BUF32: cmd = VIDIOC_PREPARE_BUF; break; + case VIDIOC_SUBDEV_G_EDID32: cmd = VIDIOC_SUBDEV_G_EDID; break; + case VIDIOC_SUBDEV_S_EDID32: cmd = VIDIOC_SUBDEV_S_EDID; break; } switch (cmd) { @@ -814,6 +850,12 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar compatible_arg = 0; break; + case VIDIOC_SUBDEV_G_EDID: + case VIDIOC_SUBDEV_S_EDID: + err = get_v4l2_subdev_edid32(&karg.v2edid, up); + compatible_arg = 0; + break; + case VIDIOC_G_FMT: case VIDIOC_S_FMT: case VIDIOC_TRY_FMT: @@ -906,6 +948,11 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar err = put_v4l2_event32(&karg.v2ev, up); break; + case VIDIOC_SUBDEV_G_EDID: + case VIDIOC_SUBDEV_S_EDID: + err = put_v4l2_subdev_edid32(&karg.v2edid, up); + break; + case VIDIOC_G_FMT: case VIDIOC_S_FMT: case VIDIOC_TRY_FMT: @@ -1026,6 +1073,8 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOC_QUERY_DV_TIMINGS: case VIDIOC_DV_TIMINGS_CAP: case VIDIOC_ENUM_FREQ_BANDS: + case VIDIOC_SUBDEV_G_EDID32: + case VIDIOC_SUBDEV_S_EDID32: ret = do_video_ioctl(file, cmd, arg); break; diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c similarity index 94% rename from drivers/media/video/v4l2-ctrls.c rename to drivers/media/v4l2-core/v4l2-ctrls.c index b6a2ee71e5c300cead8a4d77cb4e627c687a476e..631cdc0e0bdaab5524b0f9a6eff5bc8208791a2b 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -425,6 +425,18 @@ const char * const *v4l2_ctrl_get_menu(u32 id) "Gray", NULL, }; + static const char * const dv_tx_mode[] = { + "DVI-D", + "HDMI", + NULL, + }; + static const char * const dv_rgb_range[] = { + "Automatic", + "RGB limited range (16-235)", + "RGB full range (0-255)", + NULL, + }; + switch (id) { case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: @@ -502,6 +514,11 @@ const char * const *v4l2_ctrl_get_menu(u32 id) return mpeg4_profile; case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: return jpeg_chroma_subsampling; + case V4L2_CID_DV_TX_MODE: + return dv_tx_mode; + case V4L2_CID_DV_TX_RGB_RANGE: + case V4L2_CID_DV_RX_RGB_RANGE: + return dv_rgb_range; default: return NULL; @@ -733,6 +750,16 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_LINK_FREQ: return "Link Frequency"; case V4L2_CID_PIXEL_RATE: return "Pixel Rate"; + /* DV controls */ + case V4L2_CID_DV_CLASS: return "Digital Video Controls"; + case V4L2_CID_DV_TX_HOTPLUG: return "Hotplug Present"; + case V4L2_CID_DV_TX_RXSENSE: return "RxSense Present"; + case V4L2_CID_DV_TX_EDID_PRESENT: return "EDID Present"; + case V4L2_CID_DV_TX_MODE: return "Transmit Mode"; + case V4L2_CID_DV_TX_RGB_RANGE: return "Tx RGB Quantization Range"; + case V4L2_CID_DV_RX_POWER_PRESENT: return "Power Present"; + case V4L2_CID_DV_RX_RGB_RANGE: return "Rx RGB Quantization Range"; + default: return NULL; } @@ -832,6 +859,9 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_ISO_SENSITIVITY_AUTO: case V4L2_CID_EXPOSURE_METERING: case V4L2_CID_SCENE_MODE: + case V4L2_CID_DV_TX_MODE: + case V4L2_CID_DV_TX_RGB_RANGE: + case V4L2_CID_DV_RX_RGB_RANGE: *type = V4L2_CTRL_TYPE_MENU; break; case V4L2_CID_LINK_FREQ: @@ -853,6 +883,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_JPEG_CLASS: case V4L2_CID_IMAGE_SOURCE_CLASS: case V4L2_CID_IMAGE_PROC_CLASS: + case V4L2_CID_DV_CLASS: *type = V4L2_CTRL_TYPE_CTRL_CLASS; /* You can neither read not write these */ *flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY; @@ -869,6 +900,10 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_JPEG_ACTIVE_MARKER: case V4L2_CID_3A_LOCK: case V4L2_CID_AUTO_FOCUS_STATUS: + case V4L2_CID_DV_TX_HOTPLUG: + case V4L2_CID_DV_TX_RXSENSE: + case V4L2_CID_DV_TX_EDID_PRESENT: + case V4L2_CID_DV_RX_POWER_PRESENT: *type = V4L2_CTRL_TYPE_BITMASK; break; case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE: @@ -933,6 +968,10 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_FLASH_STROBE_STATUS: case V4L2_CID_AUTO_FOCUS_STATUS: case V4L2_CID_FLASH_READY: + case V4L2_CID_DV_TX_HOTPLUG: + case V4L2_CID_DV_TX_RXSENSE: + case V4L2_CID_DV_TX_EDID_PRESENT: + case V4L2_CID_DV_RX_POWER_PRESENT: *flags |= V4L2_CTRL_FLAG_READ_ONLY; break; } @@ -1174,76 +1213,53 @@ static int cluster_changed(struct v4l2_ctrl *master) return diff; } -/* Validate integer-type control */ -static int validate_new_int(const struct v4l2_ctrl *ctrl, s32 *pval) +/* Validate a new control */ +static int validate_new(const struct v4l2_ctrl *ctrl, + struct v4l2_ext_control *c) { - s32 val = *pval; + size_t len; u32 offset; + s32 val; switch (ctrl->type) { case V4L2_CTRL_TYPE_INTEGER: /* Round towards the closest legal value */ - val += ctrl->step / 2; - if (val < ctrl->minimum) - val = ctrl->minimum; - if (val > ctrl->maximum) - val = ctrl->maximum; + val = c->value + ctrl->step / 2; + val = clamp(val, ctrl->minimum, ctrl->maximum); offset = val - ctrl->minimum; offset = ctrl->step * (offset / ctrl->step); - val = ctrl->minimum + offset; - *pval = val; + c->value = ctrl->minimum + offset; return 0; case V4L2_CTRL_TYPE_BOOLEAN: - *pval = !!val; + c->value = !!c->value; return 0; case V4L2_CTRL_TYPE_MENU: case V4L2_CTRL_TYPE_INTEGER_MENU: - if (val < ctrl->minimum || val > ctrl->maximum) + if (c->value < ctrl->minimum || c->value > ctrl->maximum) return -ERANGE; - if (ctrl->menu_skip_mask & (1 << val)) + if (ctrl->menu_skip_mask & (1 << c->value)) return -EINVAL; if (ctrl->type == V4L2_CTRL_TYPE_MENU && - ctrl->qmenu[val][0] == '\0') + ctrl->qmenu[c->value][0] == '\0') return -EINVAL; return 0; case V4L2_CTRL_TYPE_BITMASK: - *pval &= ctrl->maximum; + c->value &= ctrl->maximum; return 0; case V4L2_CTRL_TYPE_BUTTON: case V4L2_CTRL_TYPE_CTRL_CLASS: - *pval = 0; + c->value = 0; return 0; - default: - return -EINVAL; - } -} - -/* Validate a new control */ -static int validate_new(const struct v4l2_ctrl *ctrl, struct v4l2_ext_control *c) -{ - char *s = c->string; - size_t len; - - switch (ctrl->type) { - case V4L2_CTRL_TYPE_INTEGER: - case V4L2_CTRL_TYPE_BOOLEAN: - case V4L2_CTRL_TYPE_MENU: - case V4L2_CTRL_TYPE_INTEGER_MENU: - case V4L2_CTRL_TYPE_BITMASK: - case V4L2_CTRL_TYPE_BUTTON: - case V4L2_CTRL_TYPE_CTRL_CLASS: - return validate_new_int(ctrl, &c->value); - case V4L2_CTRL_TYPE_INTEGER64: return 0; case V4L2_CTRL_TYPE_STRING: - len = strlen(s); + len = strlen(c->string); if (len < ctrl->minimum) return -ERANGE; if ((len - ctrl->minimum) % ctrl->step) @@ -1671,7 +1687,8 @@ EXPORT_SYMBOL(v4l2_ctrl_add_ctrl); /* Add the controls from another handler to our own. */ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl, - struct v4l2_ctrl_handler *add) + struct v4l2_ctrl_handler *add, + bool (*filter)(const struct v4l2_ctrl *ctrl)) { struct v4l2_ctrl_ref *ref; int ret = 0; @@ -1691,6 +1708,9 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl, /* And control classes */ if (ctrl->type == V4L2_CTRL_TYPE_CTRL_CLASS) continue; + /* Filter any unwanted controls */ + if (filter && !filter(ctrl)) + continue; ret = handler_new_ref(hdl, ctrl); if (ret) break; @@ -1700,6 +1720,25 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl, } EXPORT_SYMBOL(v4l2_ctrl_add_handler); +bool v4l2_ctrl_radio_filter(const struct v4l2_ctrl *ctrl) +{ + if (V4L2_CTRL_ID2CLASS(ctrl->id) == V4L2_CTRL_CLASS_FM_TX) + return true; + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + case V4L2_CID_AUDIO_LOUDNESS: + return true; + default: + break; + } + return false; +} +EXPORT_SYMBOL(v4l2_ctrl_radio_filter); + /* Cluster controls */ void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls) { @@ -2235,12 +2274,19 @@ int v4l2_subdev_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs EXPORT_SYMBOL(v4l2_subdev_g_ext_ctrls); /* Helper function to get a single control */ -static int get_ctrl(struct v4l2_ctrl *ctrl, s32 *val) +static int get_ctrl(struct v4l2_ctrl *ctrl, struct v4l2_ext_control *c) { struct v4l2_ctrl *master = ctrl->cluster[0]; int ret = 0; int i; + /* String controls are not supported. The new_to_user() and + * cur_to_user() calls below would need to be modified not to access + * userspace memory when called from get_ctrl(). + */ + if (ctrl->type == V4L2_CTRL_TYPE_STRING) + return -EINVAL; + if (ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY) return -EACCES; @@ -2250,9 +2296,9 @@ static int get_ctrl(struct v4l2_ctrl *ctrl, s32 *val) for (i = 0; i < master->ncontrols; i++) cur_to_new(master->cluster[i]); ret = call_op(master, g_volatile_ctrl); - *val = ctrl->val; + new_to_user(c, ctrl); } else { - *val = ctrl->cur.val; + cur_to_user(c, ctrl); } v4l2_ctrl_unlock(master); return ret; @@ -2261,10 +2307,14 @@ static int get_ctrl(struct v4l2_ctrl *ctrl, s32 *val) int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *control) { struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id); + struct v4l2_ext_control c; + int ret; if (ctrl == NULL || !type_is_int(ctrl)) return -EINVAL; - return get_ctrl(ctrl, &control->value); + ret = get_ctrl(ctrl, &c); + control->value = c.value; + return ret; } EXPORT_SYMBOL(v4l2_g_ctrl); @@ -2276,15 +2326,28 @@ EXPORT_SYMBOL(v4l2_subdev_g_ctrl); s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl) { - s32 val = 0; + struct v4l2_ext_control c; /* It's a driver bug if this happens. */ WARN_ON(!type_is_int(ctrl)); - get_ctrl(ctrl, &val); - return val; + c.value = 0; + get_ctrl(ctrl, &c); + return c.value; } EXPORT_SYMBOL(v4l2_ctrl_g_ctrl); +s64 v4l2_ctrl_g_ctrl_int64(struct v4l2_ctrl *ctrl) +{ + struct v4l2_ext_control c; + + /* It's a driver bug if this happens. */ + WARN_ON(ctrl->type != V4L2_CTRL_TYPE_INTEGER64); + c.value = 0; + get_ctrl(ctrl, &c); + return c.value; +} +EXPORT_SYMBOL(v4l2_ctrl_g_ctrl_int64); + /* Core function that calls try/s_ctrl and ensures that the new value is copied to the current value on a set. @@ -2500,13 +2563,21 @@ int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs EXPORT_SYMBOL(v4l2_subdev_s_ext_ctrls); /* Helper function for VIDIOC_S_CTRL compatibility */ -static int set_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, s32 *val) +static int set_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, + struct v4l2_ext_control *c) { struct v4l2_ctrl *master = ctrl->cluster[0]; int ret; int i; - ret = validate_new_int(ctrl, val); + /* String controls are not supported. The user_to_new() and + * cur_to_user() calls below would need to be modified not to access + * userspace memory when called from set_ctrl(). + */ + if (ctrl->type == V4L2_CTRL_TYPE_STRING) + return -EINVAL; + + ret = validate_new(ctrl, c); if (ret) return ret; @@ -2521,12 +2592,13 @@ static int set_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, s32 *val) manual mode we have to update the current volatile values since those will become the initial manual values after such a switch. */ if (master->is_auto && master->has_volatiles && ctrl == master && - !is_cur_manual(master) && *val == master->manual_mode_value) + !is_cur_manual(master) && c->value == master->manual_mode_value) update_from_auto_cluster(master); - ctrl->val = *val; - ctrl->is_new = 1; + + user_to_new(c, ctrl); ret = try_or_set_cluster(fh, master, true); - *val = ctrl->cur.val; + cur_to_user(c, ctrl); + v4l2_ctrl_unlock(ctrl); return ret; } @@ -2535,6 +2607,8 @@ int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, struct v4l2_control *control) { struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id); + struct v4l2_ext_control c; + int ret; if (ctrl == NULL || !type_is_int(ctrl)) return -EINVAL; @@ -2542,7 +2616,10 @@ int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY) return -EACCES; - return set_ctrl(fh, ctrl, &control->value); + c.value = control->value; + ret = set_ctrl(fh, ctrl, &c); + control->value = c.value; + return ret; } EXPORT_SYMBOL(v4l2_s_ctrl); @@ -2554,12 +2631,26 @@ EXPORT_SYMBOL(v4l2_subdev_s_ctrl); int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val) { + struct v4l2_ext_control c; + /* It's a driver bug if this happens. */ WARN_ON(!type_is_int(ctrl)); - return set_ctrl(NULL, ctrl, &val); + c.value = val; + return set_ctrl(NULL, ctrl, &c); } EXPORT_SYMBOL(v4l2_ctrl_s_ctrl); +int v4l2_ctrl_s_ctrl_int64(struct v4l2_ctrl *ctrl, s64 val) +{ + struct v4l2_ext_control c; + + /* It's a driver bug if this happens. */ + WARN_ON(ctrl->type != V4L2_CTRL_TYPE_INTEGER64); + c.value64 = val; + return set_ctrl(NULL, ctrl, &c); +} +EXPORT_SYMBOL(v4l2_ctrl_s_ctrl_int64); + static int v4l2_ctrl_add_event(struct v4l2_subscribed_event *sev, unsigned elems) { struct v4l2_ctrl *ctrl = v4l2_ctrl_find(sev->fh->ctrl_handler, sev->id); @@ -2631,7 +2722,7 @@ int v4l2_ctrl_log_status(struct file *file, void *fh) EXPORT_SYMBOL(v4l2_ctrl_log_status); int v4l2_ctrl_subscribe_event(struct v4l2_fh *fh, - struct v4l2_event_subscription *sub) + const struct v4l2_event_subscription *sub) { if (sub->type == V4L2_EVENT_CTRL) return v4l2_event_subscribe(fh, sub, 0, &v4l2_ctrl_sub_ev_ops); diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c similarity index 79% rename from drivers/media/video/v4l2-dev.c rename to drivers/media/v4l2-core/v4l2-dev.c index 07aeafca9eaabfd0f23117168945f0d1e603533a..a2df842e5100cfbffb16a0e88d4c2400d0666765 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/v4l2-core/v4l2-dev.c @@ -298,13 +298,8 @@ static ssize_t v4l2_read(struct file *filp, char __user *buf, if (!vdev->fops->read) return -EINVAL; - if (test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags) && - mutex_lock_interruptible(vdev->lock)) - return -ERESTARTSYS; if (video_is_registered(vdev)) ret = vdev->fops->read(filp, buf, sz, off); - if (test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags)) - mutex_unlock(vdev->lock); if (vdev->debug) printk(KERN_DEBUG "%s: read: %zd (%d)\n", video_device_node_name(vdev), sz, ret); @@ -319,13 +314,8 @@ static ssize_t v4l2_write(struct file *filp, const char __user *buf, if (!vdev->fops->write) return -EINVAL; - if (test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags) && - mutex_lock_interruptible(vdev->lock)) - return -ERESTARTSYS; if (video_is_registered(vdev)) ret = vdev->fops->write(filp, buf, sz, off); - if (test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags)) - mutex_unlock(vdev->lock); if (vdev->debug) printk(KERN_DEBUG "%s: write: %zd (%d)\n", video_device_node_name(vdev), sz, ret); @@ -335,20 +325,16 @@ static ssize_t v4l2_write(struct file *filp, const char __user *buf, static unsigned int v4l2_poll(struct file *filp, struct poll_table_struct *poll) { struct video_device *vdev = video_devdata(filp); - int ret = POLLERR | POLLHUP; + unsigned int res = POLLERR | POLLHUP; if (!vdev->fops->poll) return DEFAULT_POLLMASK; - if (test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags)) - mutex_lock(vdev->lock); if (video_is_registered(vdev)) - ret = vdev->fops->poll(filp, poll); - if (test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags)) - mutex_unlock(vdev->lock); + res = vdev->fops->poll(filp, poll); if (vdev->debug) printk(KERN_DEBUG "%s: poll: %08x\n", - video_device_node_name(vdev), ret); - return ret; + video_device_node_name(vdev), res); + return res; } static long v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) @@ -432,14 +418,9 @@ static int v4l2_mmap(struct file *filp, struct vm_area_struct *vm) int ret = -ENODEV; if (!vdev->fops->mmap) - return ret; - if (test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags) && - mutex_lock_interruptible(vdev->lock)) - return -ERESTARTSYS; + return -ENODEV; if (video_is_registered(vdev)) ret = vdev->fops->mmap(filp, vm); - if (test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags)) - mutex_unlock(vdev->lock); if (vdev->debug) printk(KERN_DEBUG "%s: mmap (%d)\n", video_device_node_name(vdev), ret); @@ -464,20 +445,12 @@ static int v4l2_open(struct inode *inode, struct file *filp) video_get(vdev); mutex_unlock(&videodev_lock); if (vdev->fops->open) { - if (test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags) && - mutex_lock_interruptible(vdev->lock)) { - ret = -ERESTARTSYS; - goto err; - } if (video_is_registered(vdev)) ret = vdev->fops->open(filp); else ret = -ENODEV; - if (test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags)) - mutex_unlock(vdev->lock); } -err: if (vdev->debug) printk(KERN_DEBUG "%s: open (%d)\n", video_device_node_name(vdev), ret); @@ -493,16 +466,12 @@ static int v4l2_release(struct inode *inode, struct file *filp) struct video_device *vdev = video_devdata(filp); int ret = 0; - if (vdev->fops->release) { - if (test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags)) - mutex_lock(vdev->lock); - vdev->fops->release(filp); - if (test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags)) - mutex_unlock(vdev->lock); - } + if (vdev->fops->release) + ret = vdev->fops->release(filp); if (vdev->debug) printk(KERN_DEBUG "%s: release\n", video_device_node_name(vdev)); + /* decrease the refcount unconditionally since the release() return value is ignored. */ video_put(vdev); @@ -582,9 +551,16 @@ static void determine_valid_ioctls(struct video_device *vdev) { DECLARE_BITMAP(valid_ioctls, BASE_VIDIOC_PRIVATE); const struct v4l2_ioctl_ops *ops = vdev->ioctl_ops; + bool is_vid = vdev->vfl_type == VFL_TYPE_GRABBER; + bool is_vbi = vdev->vfl_type == VFL_TYPE_VBI; + bool is_radio = vdev->vfl_type == VFL_TYPE_RADIO; + bool is_rx = vdev->vfl_dir != VFL_DIR_TX; + bool is_tx = vdev->vfl_dir != VFL_DIR_RX; bitmap_zero(valid_ioctls, BASE_VIDIOC_PRIVATE); + /* vfl_type and vfl_dir independent ioctls */ + SET_VALID_IOCTL(ops, VIDIOC_QUERYCAP, vidioc_querycap); if (ops->vidioc_g_priority || test_bit(V4L2_FL_USE_FH_PRIO, &vdev->flags)) @@ -592,70 +568,12 @@ static void determine_valid_ioctls(struct video_device *vdev) if (ops->vidioc_s_priority || test_bit(V4L2_FL_USE_FH_PRIO, &vdev->flags)) set_bit(_IOC_NR(VIDIOC_S_PRIORITY), valid_ioctls); - if (ops->vidioc_enum_fmt_vid_cap || - ops->vidioc_enum_fmt_vid_out || - ops->vidioc_enum_fmt_vid_cap_mplane || - ops->vidioc_enum_fmt_vid_out_mplane || - ops->vidioc_enum_fmt_vid_overlay || - ops->vidioc_enum_fmt_type_private) - set_bit(_IOC_NR(VIDIOC_ENUM_FMT), valid_ioctls); - if (ops->vidioc_g_fmt_vid_cap || - ops->vidioc_g_fmt_vid_out || - ops->vidioc_g_fmt_vid_cap_mplane || - ops->vidioc_g_fmt_vid_out_mplane || - ops->vidioc_g_fmt_vid_overlay || - ops->vidioc_g_fmt_vbi_cap || - ops->vidioc_g_fmt_vid_out_overlay || - ops->vidioc_g_fmt_vbi_out || - ops->vidioc_g_fmt_sliced_vbi_cap || - ops->vidioc_g_fmt_sliced_vbi_out || - ops->vidioc_g_fmt_type_private) - set_bit(_IOC_NR(VIDIOC_G_FMT), valid_ioctls); - if (ops->vidioc_s_fmt_vid_cap || - ops->vidioc_s_fmt_vid_out || - ops->vidioc_s_fmt_vid_cap_mplane || - ops->vidioc_s_fmt_vid_out_mplane || - ops->vidioc_s_fmt_vid_overlay || - ops->vidioc_s_fmt_vbi_cap || - ops->vidioc_s_fmt_vid_out_overlay || - ops->vidioc_s_fmt_vbi_out || - ops->vidioc_s_fmt_sliced_vbi_cap || - ops->vidioc_s_fmt_sliced_vbi_out || - ops->vidioc_s_fmt_type_private) - set_bit(_IOC_NR(VIDIOC_S_FMT), valid_ioctls); - if (ops->vidioc_try_fmt_vid_cap || - ops->vidioc_try_fmt_vid_out || - ops->vidioc_try_fmt_vid_cap_mplane || - ops->vidioc_try_fmt_vid_out_mplane || - ops->vidioc_try_fmt_vid_overlay || - ops->vidioc_try_fmt_vbi_cap || - ops->vidioc_try_fmt_vid_out_overlay || - ops->vidioc_try_fmt_vbi_out || - ops->vidioc_try_fmt_sliced_vbi_cap || - ops->vidioc_try_fmt_sliced_vbi_out || - ops->vidioc_try_fmt_type_private) - set_bit(_IOC_NR(VIDIOC_TRY_FMT), valid_ioctls); SET_VALID_IOCTL(ops, VIDIOC_REQBUFS, vidioc_reqbufs); SET_VALID_IOCTL(ops, VIDIOC_QUERYBUF, vidioc_querybuf); SET_VALID_IOCTL(ops, VIDIOC_QBUF, vidioc_qbuf); SET_VALID_IOCTL(ops, VIDIOC_DQBUF, vidioc_dqbuf); - SET_VALID_IOCTL(ops, VIDIOC_OVERLAY, vidioc_overlay); - SET_VALID_IOCTL(ops, VIDIOC_G_FBUF, vidioc_g_fbuf); - SET_VALID_IOCTL(ops, VIDIOC_S_FBUF, vidioc_s_fbuf); SET_VALID_IOCTL(ops, VIDIOC_STREAMON, vidioc_streamon); SET_VALID_IOCTL(ops, VIDIOC_STREAMOFF, vidioc_streamoff); - if (vdev->tvnorms) - set_bit(_IOC_NR(VIDIOC_ENUMSTD), valid_ioctls); - if (ops->vidioc_g_std || vdev->current_norm) - set_bit(_IOC_NR(VIDIOC_G_STD), valid_ioctls); - SET_VALID_IOCTL(ops, VIDIOC_S_STD, vidioc_s_std); - SET_VALID_IOCTL(ops, VIDIOC_QUERYSTD, vidioc_querystd); - SET_VALID_IOCTL(ops, VIDIOC_ENUMINPUT, vidioc_enum_input); - SET_VALID_IOCTL(ops, VIDIOC_G_INPUT, vidioc_g_input); - SET_VALID_IOCTL(ops, VIDIOC_S_INPUT, vidioc_s_input); - SET_VALID_IOCTL(ops, VIDIOC_ENUMOUTPUT, vidioc_enum_output); - SET_VALID_IOCTL(ops, VIDIOC_G_OUTPUT, vidioc_g_output); - SET_VALID_IOCTL(ops, VIDIOC_S_OUTPUT, vidioc_s_output); /* Note: the control handler can also be passed through the filehandle, and that can't be tested here. If the bit for these control ioctls is set, then the ioctl is valid. But if it is 0, then it can still @@ -674,56 +592,14 @@ static void determine_valid_ioctls(struct video_device *vdev) set_bit(_IOC_NR(VIDIOC_TRY_EXT_CTRLS), valid_ioctls); if (vdev->ctrl_handler || ops->vidioc_querymenu) set_bit(_IOC_NR(VIDIOC_QUERYMENU), valid_ioctls); - SET_VALID_IOCTL(ops, VIDIOC_ENUMAUDIO, vidioc_enumaudio); - SET_VALID_IOCTL(ops, VIDIOC_G_AUDIO, vidioc_g_audio); - SET_VALID_IOCTL(ops, VIDIOC_S_AUDIO, vidioc_s_audio); - SET_VALID_IOCTL(ops, VIDIOC_ENUMAUDOUT, vidioc_enumaudout); - SET_VALID_IOCTL(ops, VIDIOC_G_AUDOUT, vidioc_g_audout); - SET_VALID_IOCTL(ops, VIDIOC_S_AUDOUT, vidioc_s_audout); - SET_VALID_IOCTL(ops, VIDIOC_G_MODULATOR, vidioc_g_modulator); - SET_VALID_IOCTL(ops, VIDIOC_S_MODULATOR, vidioc_s_modulator); - if (ops->vidioc_g_crop || ops->vidioc_g_selection) - set_bit(_IOC_NR(VIDIOC_G_CROP), valid_ioctls); - if (ops->vidioc_s_crop || ops->vidioc_s_selection) - set_bit(_IOC_NR(VIDIOC_S_CROP), valid_ioctls); - SET_VALID_IOCTL(ops, VIDIOC_G_SELECTION, vidioc_g_selection); - SET_VALID_IOCTL(ops, VIDIOC_S_SELECTION, vidioc_s_selection); - if (ops->vidioc_cropcap || ops->vidioc_g_selection) - set_bit(_IOC_NR(VIDIOC_CROPCAP), valid_ioctls); - SET_VALID_IOCTL(ops, VIDIOC_G_JPEGCOMP, vidioc_g_jpegcomp); - SET_VALID_IOCTL(ops, VIDIOC_S_JPEGCOMP, vidioc_s_jpegcomp); - SET_VALID_IOCTL(ops, VIDIOC_G_ENC_INDEX, vidioc_g_enc_index); - SET_VALID_IOCTL(ops, VIDIOC_ENCODER_CMD, vidioc_encoder_cmd); - SET_VALID_IOCTL(ops, VIDIOC_TRY_ENCODER_CMD, vidioc_try_encoder_cmd); - SET_VALID_IOCTL(ops, VIDIOC_DECODER_CMD, vidioc_decoder_cmd); - SET_VALID_IOCTL(ops, VIDIOC_TRY_DECODER_CMD, vidioc_try_decoder_cmd); - if (ops->vidioc_g_parm || (vdev->vfl_type == VFL_TYPE_GRABBER && - (ops->vidioc_g_std || vdev->tvnorms))) - set_bit(_IOC_NR(VIDIOC_G_PARM), valid_ioctls); - SET_VALID_IOCTL(ops, VIDIOC_S_PARM, vidioc_s_parm); - SET_VALID_IOCTL(ops, VIDIOC_G_TUNER, vidioc_g_tuner); - SET_VALID_IOCTL(ops, VIDIOC_S_TUNER, vidioc_s_tuner); SET_VALID_IOCTL(ops, VIDIOC_G_FREQUENCY, vidioc_g_frequency); SET_VALID_IOCTL(ops, VIDIOC_S_FREQUENCY, vidioc_s_frequency); - SET_VALID_IOCTL(ops, VIDIOC_G_SLICED_VBI_CAP, vidioc_g_sliced_vbi_cap); SET_VALID_IOCTL(ops, VIDIOC_LOG_STATUS, vidioc_log_status); #ifdef CONFIG_VIDEO_ADV_DEBUG SET_VALID_IOCTL(ops, VIDIOC_DBG_G_REGISTER, vidioc_g_register); SET_VALID_IOCTL(ops, VIDIOC_DBG_S_REGISTER, vidioc_s_register); #endif SET_VALID_IOCTL(ops, VIDIOC_DBG_G_CHIP_IDENT, vidioc_g_chip_ident); - SET_VALID_IOCTL(ops, VIDIOC_S_HW_FREQ_SEEK, vidioc_s_hw_freq_seek); - SET_VALID_IOCTL(ops, VIDIOC_ENUM_FRAMESIZES, vidioc_enum_framesizes); - SET_VALID_IOCTL(ops, VIDIOC_ENUM_FRAMEINTERVALS, vidioc_enum_frameintervals); - SET_VALID_IOCTL(ops, VIDIOC_ENUM_DV_PRESETS, vidioc_enum_dv_presets); - SET_VALID_IOCTL(ops, VIDIOC_S_DV_PRESET, vidioc_s_dv_preset); - SET_VALID_IOCTL(ops, VIDIOC_G_DV_PRESET, vidioc_g_dv_preset); - SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_PRESET, vidioc_query_dv_preset); - SET_VALID_IOCTL(ops, VIDIOC_S_DV_TIMINGS, vidioc_s_dv_timings); - SET_VALID_IOCTL(ops, VIDIOC_G_DV_TIMINGS, vidioc_g_dv_timings); - SET_VALID_IOCTL(ops, VIDIOC_ENUM_DV_TIMINGS, vidioc_enum_dv_timings); - SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_TIMINGS, vidioc_query_dv_timings); - SET_VALID_IOCTL(ops, VIDIOC_DV_TIMINGS_CAP, vidioc_dv_timings_cap); /* yes, really vidioc_subscribe_event */ SET_VALID_IOCTL(ops, VIDIOC_DQEVENT, vidioc_subscribe_event); SET_VALID_IOCTL(ops, VIDIOC_SUBSCRIBE_EVENT, vidioc_subscribe_event); @@ -732,6 +608,125 @@ static void determine_valid_ioctls(struct video_device *vdev) SET_VALID_IOCTL(ops, VIDIOC_PREPARE_BUF, vidioc_prepare_buf); if (ops->vidioc_enum_freq_bands || ops->vidioc_g_tuner || ops->vidioc_g_modulator) set_bit(_IOC_NR(VIDIOC_ENUM_FREQ_BANDS), valid_ioctls); + + if (is_vid) { + /* video specific ioctls */ + if ((is_rx && (ops->vidioc_enum_fmt_vid_cap || + ops->vidioc_enum_fmt_vid_cap_mplane || + ops->vidioc_enum_fmt_vid_overlay)) || + (is_tx && (ops->vidioc_enum_fmt_vid_out || + ops->vidioc_enum_fmt_vid_out_mplane))) + set_bit(_IOC_NR(VIDIOC_ENUM_FMT), valid_ioctls); + if ((is_rx && (ops->vidioc_g_fmt_vid_cap || + ops->vidioc_g_fmt_vid_cap_mplane || + ops->vidioc_g_fmt_vid_overlay)) || + (is_tx && (ops->vidioc_g_fmt_vid_out || + ops->vidioc_g_fmt_vid_out_mplane || + ops->vidioc_g_fmt_vid_out_overlay))) + set_bit(_IOC_NR(VIDIOC_G_FMT), valid_ioctls); + if ((is_rx && (ops->vidioc_s_fmt_vid_cap || + ops->vidioc_s_fmt_vid_cap_mplane || + ops->vidioc_s_fmt_vid_overlay)) || + (is_tx && (ops->vidioc_s_fmt_vid_out || + ops->vidioc_s_fmt_vid_out_mplane || + ops->vidioc_s_fmt_vid_out_overlay))) + set_bit(_IOC_NR(VIDIOC_S_FMT), valid_ioctls); + if ((is_rx && (ops->vidioc_try_fmt_vid_cap || + ops->vidioc_try_fmt_vid_cap_mplane || + ops->vidioc_try_fmt_vid_overlay)) || + (is_tx && (ops->vidioc_try_fmt_vid_out || + ops->vidioc_try_fmt_vid_out_mplane || + ops->vidioc_try_fmt_vid_out_overlay))) + set_bit(_IOC_NR(VIDIOC_TRY_FMT), valid_ioctls); + SET_VALID_IOCTL(ops, VIDIOC_OVERLAY, vidioc_overlay); + SET_VALID_IOCTL(ops, VIDIOC_G_FBUF, vidioc_g_fbuf); + SET_VALID_IOCTL(ops, VIDIOC_S_FBUF, vidioc_s_fbuf); + SET_VALID_IOCTL(ops, VIDIOC_G_JPEGCOMP, vidioc_g_jpegcomp); + SET_VALID_IOCTL(ops, VIDIOC_S_JPEGCOMP, vidioc_s_jpegcomp); + SET_VALID_IOCTL(ops, VIDIOC_G_ENC_INDEX, vidioc_g_enc_index); + SET_VALID_IOCTL(ops, VIDIOC_ENCODER_CMD, vidioc_encoder_cmd); + SET_VALID_IOCTL(ops, VIDIOC_TRY_ENCODER_CMD, vidioc_try_encoder_cmd); + SET_VALID_IOCTL(ops, VIDIOC_DECODER_CMD, vidioc_decoder_cmd); + SET_VALID_IOCTL(ops, VIDIOC_TRY_DECODER_CMD, vidioc_try_decoder_cmd); + SET_VALID_IOCTL(ops, VIDIOC_ENUM_FRAMESIZES, vidioc_enum_framesizes); + SET_VALID_IOCTL(ops, VIDIOC_ENUM_FRAMEINTERVALS, vidioc_enum_frameintervals); + } else if (is_vbi) { + /* vbi specific ioctls */ + if ((is_rx && (ops->vidioc_g_fmt_vbi_cap || + ops->vidioc_g_fmt_sliced_vbi_cap)) || + (is_tx && (ops->vidioc_g_fmt_vbi_out || + ops->vidioc_g_fmt_sliced_vbi_out))) + set_bit(_IOC_NR(VIDIOC_G_FMT), valid_ioctls); + if ((is_rx && (ops->vidioc_s_fmt_vbi_cap || + ops->vidioc_s_fmt_sliced_vbi_cap)) || + (is_tx && (ops->vidioc_s_fmt_vbi_out || + ops->vidioc_s_fmt_sliced_vbi_out))) + set_bit(_IOC_NR(VIDIOC_S_FMT), valid_ioctls); + if ((is_rx && (ops->vidioc_try_fmt_vbi_cap || + ops->vidioc_try_fmt_sliced_vbi_cap)) || + (is_tx && (ops->vidioc_try_fmt_vbi_out || + ops->vidioc_try_fmt_sliced_vbi_out))) + set_bit(_IOC_NR(VIDIOC_TRY_FMT), valid_ioctls); + SET_VALID_IOCTL(ops, VIDIOC_G_SLICED_VBI_CAP, vidioc_g_sliced_vbi_cap); + } + if (!is_radio) { + /* ioctls valid for video or vbi */ + if (ops->vidioc_s_std) + set_bit(_IOC_NR(VIDIOC_ENUMSTD), valid_ioctls); + if (ops->vidioc_g_std || vdev->current_norm) + set_bit(_IOC_NR(VIDIOC_G_STD), valid_ioctls); + SET_VALID_IOCTL(ops, VIDIOC_S_STD, vidioc_s_std); + if (is_rx) { + SET_VALID_IOCTL(ops, VIDIOC_QUERYSTD, vidioc_querystd); + SET_VALID_IOCTL(ops, VIDIOC_ENUMINPUT, vidioc_enum_input); + SET_VALID_IOCTL(ops, VIDIOC_G_INPUT, vidioc_g_input); + SET_VALID_IOCTL(ops, VIDIOC_S_INPUT, vidioc_s_input); + SET_VALID_IOCTL(ops, VIDIOC_ENUMAUDIO, vidioc_enumaudio); + SET_VALID_IOCTL(ops, VIDIOC_G_AUDIO, vidioc_g_audio); + SET_VALID_IOCTL(ops, VIDIOC_S_AUDIO, vidioc_s_audio); + SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_PRESET, vidioc_query_dv_preset); + SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_TIMINGS, vidioc_query_dv_timings); + } + if (is_tx) { + SET_VALID_IOCTL(ops, VIDIOC_ENUMOUTPUT, vidioc_enum_output); + SET_VALID_IOCTL(ops, VIDIOC_G_OUTPUT, vidioc_g_output); + SET_VALID_IOCTL(ops, VIDIOC_S_OUTPUT, vidioc_s_output); + SET_VALID_IOCTL(ops, VIDIOC_ENUMAUDOUT, vidioc_enumaudout); + SET_VALID_IOCTL(ops, VIDIOC_G_AUDOUT, vidioc_g_audout); + SET_VALID_IOCTL(ops, VIDIOC_S_AUDOUT, vidioc_s_audout); + } + if (ops->vidioc_g_crop || ops->vidioc_g_selection) + set_bit(_IOC_NR(VIDIOC_G_CROP), valid_ioctls); + if (ops->vidioc_s_crop || ops->vidioc_s_selection) + set_bit(_IOC_NR(VIDIOC_S_CROP), valid_ioctls); + SET_VALID_IOCTL(ops, VIDIOC_G_SELECTION, vidioc_g_selection); + SET_VALID_IOCTL(ops, VIDIOC_S_SELECTION, vidioc_s_selection); + if (ops->vidioc_cropcap || ops->vidioc_g_selection) + set_bit(_IOC_NR(VIDIOC_CROPCAP), valid_ioctls); + if (ops->vidioc_g_parm || (vdev->vfl_type == VFL_TYPE_GRABBER && + (ops->vidioc_g_std || vdev->current_norm))) + set_bit(_IOC_NR(VIDIOC_G_PARM), valid_ioctls); + SET_VALID_IOCTL(ops, VIDIOC_S_PARM, vidioc_s_parm); + SET_VALID_IOCTL(ops, VIDIOC_ENUM_DV_PRESETS, vidioc_enum_dv_presets); + SET_VALID_IOCTL(ops, VIDIOC_S_DV_PRESET, vidioc_s_dv_preset); + SET_VALID_IOCTL(ops, VIDIOC_G_DV_PRESET, vidioc_g_dv_preset); + SET_VALID_IOCTL(ops, VIDIOC_S_DV_TIMINGS, vidioc_s_dv_timings); + SET_VALID_IOCTL(ops, VIDIOC_G_DV_TIMINGS, vidioc_g_dv_timings); + SET_VALID_IOCTL(ops, VIDIOC_ENUM_DV_TIMINGS, vidioc_enum_dv_timings); + SET_VALID_IOCTL(ops, VIDIOC_DV_TIMINGS_CAP, vidioc_dv_timings_cap); + } + if (is_tx) { + /* transmitter only ioctls */ + SET_VALID_IOCTL(ops, VIDIOC_G_MODULATOR, vidioc_g_modulator); + SET_VALID_IOCTL(ops, VIDIOC_S_MODULATOR, vidioc_s_modulator); + } + if (is_rx) { + /* receiver only ioctls */ + SET_VALID_IOCTL(ops, VIDIOC_G_TUNER, vidioc_g_tuner); + SET_VALID_IOCTL(ops, VIDIOC_S_TUNER, vidioc_s_tuner); + SET_VALID_IOCTL(ops, VIDIOC_S_HW_FREQ_SEEK, vidioc_s_hw_freq_seek); + } + bitmap_andnot(vdev->valid_ioctls, valid_ioctls, vdev->valid_ioctls, BASE_VIDIOC_PRIVATE); } @@ -882,10 +877,6 @@ int __video_register_device(struct video_device *vdev, int type, int nr, WARN_ON(video_device[vdev->minor] != NULL); vdev->index = get_index(vdev); mutex_unlock(&videodev_lock); - /* if no lock was passed, then make sure the LOCK_ALL_FOPS bit is - clear and warn if it wasn't. */ - if (vdev->lock == NULL) - WARN_ON(test_and_clear_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags)); if (vdev->ioctl_ops) determine_valid_ioctls(vdev); diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/v4l2-core/v4l2-device.c similarity index 99% rename from drivers/media/video/v4l2-device.c rename to drivers/media/v4l2-core/v4l2-device.c index 1f203b85a63739463a448259800b31f240359bbf..513969fa695d89f0a424b2b0456c9496e1010993 100644 --- a/drivers/media/video/v4l2-device.c +++ b/drivers/media/v4l2-core/v4l2-device.c @@ -166,7 +166,7 @@ int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev, } /* This just returns 0 if either of the two args is NULL */ - err = v4l2_ctrl_add_handler(v4l2_dev->ctrl_handler, sd->ctrl_handler); + err = v4l2_ctrl_add_handler(v4l2_dev->ctrl_handler, sd->ctrl_handler, NULL); if (err) { if (sd->internal_ops && sd->internal_ops->unregistered) sd->internal_ops->unregistered(sd); diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/v4l2-core/v4l2-event.c similarity index 98% rename from drivers/media/video/v4l2-event.c rename to drivers/media/v4l2-core/v4l2-event.c index ef2a33c9404559a4d4e0f80c23de45c10e8baf0a..18a040b935a312d31abb944c50405e026a510f1b 100644 --- a/drivers/media/video/v4l2-event.c +++ b/drivers/media/v4l2-core/v4l2-event.c @@ -203,7 +203,7 @@ int v4l2_event_pending(struct v4l2_fh *fh) EXPORT_SYMBOL_GPL(v4l2_event_pending); int v4l2_event_subscribe(struct v4l2_fh *fh, - struct v4l2_event_subscription *sub, unsigned elems, + const struct v4l2_event_subscription *sub, unsigned elems, const struct v4l2_subscribed_event_ops *ops) { struct v4l2_subscribed_event *sev, *found_ev; @@ -278,7 +278,7 @@ void v4l2_event_unsubscribe_all(struct v4l2_fh *fh) EXPORT_SYMBOL_GPL(v4l2_event_unsubscribe_all); int v4l2_event_unsubscribe(struct v4l2_fh *fh, - struct v4l2_event_subscription *sub) + const struct v4l2_event_subscription *sub) { struct v4l2_subscribed_event *sev; unsigned long flags; diff --git a/drivers/media/video/v4l2-fh.c b/drivers/media/v4l2-core/v4l2-fh.c similarity index 100% rename from drivers/media/video/v4l2-fh.c rename to drivers/media/v4l2-core/v4l2-fh.c diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/v4l2-core/v4l2-int-device.c similarity index 100% rename from drivers/media/video/v4l2-int-device.c rename to drivers/media/v4l2-core/v4l2-int-device.c diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c similarity index 92% rename from drivers/media/video/v4l2-ioctl.c rename to drivers/media/v4l2-core/v4l2-ioctl.c index f5847af559b4e84fe04459acfd17f1c0df9a7ea5..9d3e46c446ad7cf502ca49fe6dcaa1d85ec09277 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c @@ -316,9 +316,6 @@ static void v4l_print_format(const void *arg, bool write_only) sliced->service_lines[0][i], sliced->service_lines[1][i]); break; - case V4L2_BUF_TYPE_PRIVATE: - pr_cont("\n"); - break; } } @@ -879,57 +876,62 @@ static int check_ext_ctrls(struct v4l2_ext_controls *c, int allow_priv) return 1; } -static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type) +static int check_fmt(struct file *file, enum v4l2_buf_type type) { + struct video_device *vfd = video_devdata(file); + const struct v4l2_ioctl_ops *ops = vfd->ioctl_ops; + bool is_vid = vfd->vfl_type == VFL_TYPE_GRABBER; + bool is_vbi = vfd->vfl_type == VFL_TYPE_VBI; + bool is_rx = vfd->vfl_dir != VFL_DIR_TX; + bool is_tx = vfd->vfl_dir != VFL_DIR_RX; + if (ops == NULL) return -EINVAL; switch (type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: - if (ops->vidioc_g_fmt_vid_cap || - ops->vidioc_g_fmt_vid_cap_mplane) + if (is_vid && is_rx && + (ops->vidioc_g_fmt_vid_cap || ops->vidioc_g_fmt_vid_cap_mplane)) return 0; break; case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: - if (ops->vidioc_g_fmt_vid_cap_mplane) + if (is_vid && is_rx && ops->vidioc_g_fmt_vid_cap_mplane) return 0; break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (ops->vidioc_g_fmt_vid_overlay) + if (is_vid && is_rx && ops->vidioc_g_fmt_vid_overlay) return 0; break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: - if (ops->vidioc_g_fmt_vid_out || - ops->vidioc_g_fmt_vid_out_mplane) + if (is_vid && is_tx && + (ops->vidioc_g_fmt_vid_out || ops->vidioc_g_fmt_vid_out_mplane)) return 0; break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - if (ops->vidioc_g_fmt_vid_out_mplane) + if (is_vid && is_tx && ops->vidioc_g_fmt_vid_out_mplane) return 0; break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: - if (ops->vidioc_g_fmt_vid_out_overlay) + if (is_vid && is_tx && ops->vidioc_g_fmt_vid_out_overlay) return 0; break; case V4L2_BUF_TYPE_VBI_CAPTURE: - if (ops->vidioc_g_fmt_vbi_cap) + if (is_vbi && is_rx && ops->vidioc_g_fmt_vbi_cap) return 0; break; case V4L2_BUF_TYPE_VBI_OUTPUT: - if (ops->vidioc_g_fmt_vbi_out) + if (is_vbi && is_tx && ops->vidioc_g_fmt_vbi_out) return 0; break; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: - if (ops->vidioc_g_fmt_sliced_vbi_cap) + if (is_vbi && is_rx && ops->vidioc_g_fmt_sliced_vbi_cap) return 0; break; case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - if (ops->vidioc_g_fmt_sliced_vbi_out) + if (is_vbi && is_tx && ops->vidioc_g_fmt_sliced_vbi_out) return 0; break; - case V4L2_BUF_TYPE_PRIVATE: - if (ops->vidioc_g_fmt_type_private) - return 0; + default: break; } return -EINVAL; @@ -989,7 +991,7 @@ static int v4l_enuminput(const struct v4l2_ioctl_ops *ops, struct v4l2_input *p = arg; /* - * We set the flags for CAP_PRESETS, CAP_CUSTOM_TIMINGS & + * We set the flags for CAP_PRESETS, CAP_DV_TIMINGS & * CAP_STD here based on ioctl handler provided by the * driver. If the driver doesn't support these * for a specific input, it must override these flags. @@ -999,7 +1001,7 @@ static int v4l_enuminput(const struct v4l2_ioctl_ops *ops, if (ops->vidioc_s_dv_preset) p->capabilities |= V4L2_IN_CAP_PRESETS; if (ops->vidioc_s_dv_timings) - p->capabilities |= V4L2_IN_CAP_CUSTOM_TIMINGS; + p->capabilities |= V4L2_IN_CAP_DV_TIMINGS; return ops->vidioc_enum_input(file, fh, p); } @@ -1010,7 +1012,7 @@ static int v4l_enumoutput(const struct v4l2_ioctl_ops *ops, struct v4l2_output *p = arg; /* - * We set the flags for CAP_PRESETS, CAP_CUSTOM_TIMINGS & + * We set the flags for CAP_PRESETS, CAP_DV_TIMINGS & * CAP_STD here based on ioctl handler provided by the * driver. If the driver doesn't support these * for a specific output, it must override these flags. @@ -1020,7 +1022,7 @@ static int v4l_enumoutput(const struct v4l2_ioctl_ops *ops, if (ops->vidioc_s_dv_preset) p->capabilities |= V4L2_OUT_CAP_PRESETS; if (ops->vidioc_s_dv_timings) - p->capabilities |= V4L2_OUT_CAP_CUSTOM_TIMINGS; + p->capabilities |= V4L2_OUT_CAP_DV_TIMINGS; return ops->vidioc_enum_output(file, fh, p); } @@ -1029,32 +1031,31 @@ static int v4l_enum_fmt(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_fmtdesc *p = arg; + struct video_device *vfd = video_devdata(file); + bool is_rx = vfd->vfl_dir != VFL_DIR_TX; + bool is_tx = vfd->vfl_dir != VFL_DIR_RX; switch (p->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: - if (unlikely(!ops->vidioc_enum_fmt_vid_cap)) + if (unlikely(!is_rx || !ops->vidioc_enum_fmt_vid_cap)) break; return ops->vidioc_enum_fmt_vid_cap(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: - if (unlikely(!ops->vidioc_enum_fmt_vid_cap_mplane)) + if (unlikely(!is_rx || !ops->vidioc_enum_fmt_vid_cap_mplane)) break; return ops->vidioc_enum_fmt_vid_cap_mplane(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (unlikely(!ops->vidioc_enum_fmt_vid_overlay)) + if (unlikely(!is_rx || !ops->vidioc_enum_fmt_vid_overlay)) break; return ops->vidioc_enum_fmt_vid_overlay(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OUTPUT: - if (unlikely(!ops->vidioc_enum_fmt_vid_out)) + if (unlikely(!is_tx || !ops->vidioc_enum_fmt_vid_out)) break; return ops->vidioc_enum_fmt_vid_out(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - if (unlikely(!ops->vidioc_enum_fmt_vid_out_mplane)) + if (unlikely(!is_tx || !ops->vidioc_enum_fmt_vid_out_mplane)) break; return ops->vidioc_enum_fmt_vid_out_mplane(file, fh, arg); - case V4L2_BUF_TYPE_PRIVATE: - if (unlikely(!ops->vidioc_enum_fmt_type_private)) - break; - return ops->vidioc_enum_fmt_type_private(file, fh, arg); } return -EINVAL; } @@ -1063,52 +1064,52 @@ static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_format *p = arg; + struct video_device *vfd = video_devdata(file); + bool is_vid = vfd->vfl_type == VFL_TYPE_GRABBER; + bool is_rx = vfd->vfl_dir != VFL_DIR_TX; + bool is_tx = vfd->vfl_dir != VFL_DIR_RX; switch (p->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: - if (unlikely(!ops->vidioc_g_fmt_vid_cap)) + if (unlikely(!is_rx || !is_vid || !ops->vidioc_g_fmt_vid_cap)) break; return ops->vidioc_g_fmt_vid_cap(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: - if (unlikely(!ops->vidioc_g_fmt_vid_cap_mplane)) + if (unlikely(!is_rx || !is_vid || !ops->vidioc_g_fmt_vid_cap_mplane)) break; return ops->vidioc_g_fmt_vid_cap_mplane(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (unlikely(!ops->vidioc_g_fmt_vid_overlay)) + if (unlikely(!is_rx || !is_vid || !ops->vidioc_g_fmt_vid_overlay)) break; return ops->vidioc_g_fmt_vid_overlay(file, fh, arg); + case V4L2_BUF_TYPE_VBI_CAPTURE: + if (unlikely(!is_rx || is_vid || !ops->vidioc_g_fmt_vbi_cap)) + break; + return ops->vidioc_g_fmt_vbi_cap(file, fh, arg); + case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + if (unlikely(!is_rx || is_vid || !ops->vidioc_g_fmt_sliced_vbi_cap)) + break; + return ops->vidioc_g_fmt_sliced_vbi_cap(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OUTPUT: - if (unlikely(!ops->vidioc_g_fmt_vid_out)) + if (unlikely(!is_tx || !is_vid || !ops->vidioc_g_fmt_vid_out)) break; return ops->vidioc_g_fmt_vid_out(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - if (unlikely(!ops->vidioc_g_fmt_vid_out_mplane)) + if (unlikely(!is_tx || !is_vid || !ops->vidioc_g_fmt_vid_out_mplane)) break; return ops->vidioc_g_fmt_vid_out_mplane(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: - if (unlikely(!ops->vidioc_g_fmt_vid_out_overlay)) + if (unlikely(!is_tx || !is_vid || !ops->vidioc_g_fmt_vid_out_overlay)) break; return ops->vidioc_g_fmt_vid_out_overlay(file, fh, arg); - case V4L2_BUF_TYPE_VBI_CAPTURE: - if (unlikely(!ops->vidioc_g_fmt_vbi_cap)) - break; - return ops->vidioc_g_fmt_vbi_cap(file, fh, arg); case V4L2_BUF_TYPE_VBI_OUTPUT: - if (unlikely(!ops->vidioc_g_fmt_vbi_out)) + if (unlikely(!is_tx || is_vid || !ops->vidioc_g_fmt_vbi_out)) break; return ops->vidioc_g_fmt_vbi_out(file, fh, arg); - case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: - if (unlikely(!ops->vidioc_g_fmt_sliced_vbi_cap)) - break; - return ops->vidioc_g_fmt_sliced_vbi_cap(file, fh, arg); case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - if (unlikely(!ops->vidioc_g_fmt_sliced_vbi_out)) + if (unlikely(!is_tx || is_vid || !ops->vidioc_g_fmt_sliced_vbi_out)) break; return ops->vidioc_g_fmt_sliced_vbi_out(file, fh, arg); - case V4L2_BUF_TYPE_PRIVATE: - if (unlikely(!ops->vidioc_g_fmt_type_private)) - break; - return ops->vidioc_g_fmt_type_private(file, fh, arg); } return -EINVAL; } @@ -1117,62 +1118,62 @@ static int v4l_s_fmt(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_format *p = arg; + struct video_device *vfd = video_devdata(file); + bool is_vid = vfd->vfl_type == VFL_TYPE_GRABBER; + bool is_rx = vfd->vfl_dir != VFL_DIR_TX; + bool is_tx = vfd->vfl_dir != VFL_DIR_RX; switch (p->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: - if (unlikely(!ops->vidioc_s_fmt_vid_cap)) + if (unlikely(!is_rx || !is_vid || !ops->vidioc_s_fmt_vid_cap)) break; CLEAR_AFTER_FIELD(p, fmt.pix); return ops->vidioc_s_fmt_vid_cap(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: - if (unlikely(!ops->vidioc_s_fmt_vid_cap_mplane)) + if (unlikely(!is_rx || !is_vid || !ops->vidioc_s_fmt_vid_cap_mplane)) break; CLEAR_AFTER_FIELD(p, fmt.pix_mp); return ops->vidioc_s_fmt_vid_cap_mplane(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (unlikely(!ops->vidioc_s_fmt_vid_overlay)) + if (unlikely(!is_rx || !is_vid || !ops->vidioc_s_fmt_vid_overlay)) break; CLEAR_AFTER_FIELD(p, fmt.win); return ops->vidioc_s_fmt_vid_overlay(file, fh, arg); + case V4L2_BUF_TYPE_VBI_CAPTURE: + if (unlikely(!is_rx || is_vid || !ops->vidioc_s_fmt_vbi_cap)) + break; + CLEAR_AFTER_FIELD(p, fmt.vbi); + return ops->vidioc_s_fmt_vbi_cap(file, fh, arg); + case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + if (unlikely(!is_rx || is_vid || !ops->vidioc_s_fmt_sliced_vbi_cap)) + break; + CLEAR_AFTER_FIELD(p, fmt.sliced); + return ops->vidioc_s_fmt_sliced_vbi_cap(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OUTPUT: - if (unlikely(!ops->vidioc_s_fmt_vid_out)) + if (unlikely(!is_tx || !is_vid || !ops->vidioc_s_fmt_vid_out)) break; CLEAR_AFTER_FIELD(p, fmt.pix); return ops->vidioc_s_fmt_vid_out(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - if (unlikely(!ops->vidioc_s_fmt_vid_out_mplane)) + if (unlikely(!is_tx || !is_vid || !ops->vidioc_s_fmt_vid_out_mplane)) break; CLEAR_AFTER_FIELD(p, fmt.pix_mp); return ops->vidioc_s_fmt_vid_out_mplane(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: - if (unlikely(!ops->vidioc_s_fmt_vid_out_overlay)) + if (unlikely(!is_tx || !is_vid || !ops->vidioc_s_fmt_vid_out_overlay)) break; CLEAR_AFTER_FIELD(p, fmt.win); return ops->vidioc_s_fmt_vid_out_overlay(file, fh, arg); - case V4L2_BUF_TYPE_VBI_CAPTURE: - if (unlikely(!ops->vidioc_s_fmt_vbi_cap)) - break; - CLEAR_AFTER_FIELD(p, fmt.vbi); - return ops->vidioc_s_fmt_vbi_cap(file, fh, arg); case V4L2_BUF_TYPE_VBI_OUTPUT: - if (unlikely(!ops->vidioc_s_fmt_vbi_out)) + if (unlikely(!is_tx || is_vid || !ops->vidioc_s_fmt_vbi_out)) break; CLEAR_AFTER_FIELD(p, fmt.vbi); return ops->vidioc_s_fmt_vbi_out(file, fh, arg); - case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: - if (unlikely(!ops->vidioc_s_fmt_sliced_vbi_cap)) - break; - CLEAR_AFTER_FIELD(p, fmt.sliced); - return ops->vidioc_s_fmt_sliced_vbi_cap(file, fh, arg); case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - if (unlikely(!ops->vidioc_s_fmt_sliced_vbi_out)) + if (unlikely(!is_tx || is_vid || !ops->vidioc_s_fmt_sliced_vbi_out)) break; CLEAR_AFTER_FIELD(p, fmt.sliced); return ops->vidioc_s_fmt_sliced_vbi_out(file, fh, arg); - case V4L2_BUF_TYPE_PRIVATE: - if (unlikely(!ops->vidioc_s_fmt_type_private)) - break; - return ops->vidioc_s_fmt_type_private(file, fh, arg); } return -EINVAL; } @@ -1181,62 +1182,62 @@ static int v4l_try_fmt(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_format *p = arg; + struct video_device *vfd = video_devdata(file); + bool is_vid = vfd->vfl_type == VFL_TYPE_GRABBER; + bool is_rx = vfd->vfl_dir != VFL_DIR_TX; + bool is_tx = vfd->vfl_dir != VFL_DIR_RX; switch (p->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: - if (unlikely(!ops->vidioc_try_fmt_vid_cap)) + if (unlikely(!is_rx || !is_vid || !ops->vidioc_try_fmt_vid_cap)) break; CLEAR_AFTER_FIELD(p, fmt.pix); return ops->vidioc_try_fmt_vid_cap(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: - if (unlikely(!ops->vidioc_try_fmt_vid_cap_mplane)) + if (unlikely(!is_rx || !is_vid || !ops->vidioc_try_fmt_vid_cap_mplane)) break; CLEAR_AFTER_FIELD(p, fmt.pix_mp); return ops->vidioc_try_fmt_vid_cap_mplane(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (unlikely(!ops->vidioc_try_fmt_vid_overlay)) + if (unlikely(!is_rx || !is_vid || !ops->vidioc_try_fmt_vid_overlay)) break; CLEAR_AFTER_FIELD(p, fmt.win); return ops->vidioc_try_fmt_vid_overlay(file, fh, arg); + case V4L2_BUF_TYPE_VBI_CAPTURE: + if (unlikely(!is_rx || is_vid || !ops->vidioc_try_fmt_vbi_cap)) + break; + CLEAR_AFTER_FIELD(p, fmt.vbi); + return ops->vidioc_try_fmt_vbi_cap(file, fh, arg); + case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + if (unlikely(!is_rx || is_vid || !ops->vidioc_try_fmt_sliced_vbi_cap)) + break; + CLEAR_AFTER_FIELD(p, fmt.sliced); + return ops->vidioc_try_fmt_sliced_vbi_cap(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OUTPUT: - if (unlikely(!ops->vidioc_try_fmt_vid_out)) + if (unlikely(!is_tx || !is_vid || !ops->vidioc_try_fmt_vid_out)) break; CLEAR_AFTER_FIELD(p, fmt.pix); return ops->vidioc_try_fmt_vid_out(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - if (unlikely(!ops->vidioc_try_fmt_vid_out_mplane)) + if (unlikely(!is_tx || !is_vid || !ops->vidioc_try_fmt_vid_out_mplane)) break; CLEAR_AFTER_FIELD(p, fmt.pix_mp); return ops->vidioc_try_fmt_vid_out_mplane(file, fh, arg); case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: - if (unlikely(!ops->vidioc_try_fmt_vid_out_overlay)) + if (unlikely(!is_tx || !is_vid || !ops->vidioc_try_fmt_vid_out_overlay)) break; CLEAR_AFTER_FIELD(p, fmt.win); return ops->vidioc_try_fmt_vid_out_overlay(file, fh, arg); - case V4L2_BUF_TYPE_VBI_CAPTURE: - if (unlikely(!ops->vidioc_try_fmt_vbi_cap)) - break; - CLEAR_AFTER_FIELD(p, fmt.vbi); - return ops->vidioc_try_fmt_vbi_cap(file, fh, arg); case V4L2_BUF_TYPE_VBI_OUTPUT: - if (unlikely(!ops->vidioc_try_fmt_vbi_out)) + if (unlikely(!is_tx || is_vid || !ops->vidioc_try_fmt_vbi_out)) break; CLEAR_AFTER_FIELD(p, fmt.vbi); return ops->vidioc_try_fmt_vbi_out(file, fh, arg); - case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: - if (unlikely(!ops->vidioc_try_fmt_sliced_vbi_cap)) - break; - CLEAR_AFTER_FIELD(p, fmt.sliced); - return ops->vidioc_try_fmt_sliced_vbi_cap(file, fh, arg); case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - if (unlikely(!ops->vidioc_try_fmt_sliced_vbi_out)) + if (unlikely(!is_tx || is_vid || !ops->vidioc_try_fmt_sliced_vbi_out)) break; CLEAR_AFTER_FIELD(p, fmt.sliced); return ops->vidioc_try_fmt_sliced_vbi_out(file, fh, arg); - case V4L2_BUF_TYPE_PRIVATE: - if (unlikely(!ops->vidioc_try_fmt_type_private)) - break; - return ops->vidioc_try_fmt_type_private(file, fh, arg); } return -EINVAL; } @@ -1325,6 +1326,11 @@ static int v4l_enumstd(const struct v4l2_ioctl_ops *ops, unsigned int index = p->index, i, j = 0; const char *descr = ""; + /* Return -ENODATA if the tvnorms for the current input + or output is 0, meaning that it doesn't support this API. */ + if (id == 0) + return -ENODATA; + /* Return norm array in a canonical way */ for (i = 0; i <= index && id; i++) { /* last std value in the standards array is 0, so this @@ -1426,13 +1432,12 @@ static int v4l_reqbufs(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_requestbuffers *p = arg; - int ret = check_fmt(ops, p->type); + int ret = check_fmt(file, p->type); if (ret) return ret; - if (p->type < V4L2_BUF_TYPE_PRIVATE) - CLEAR_AFTER_FIELD(p, memory); + CLEAR_AFTER_FIELD(p, memory); return ops->vidioc_reqbufs(file, fh, p); } @@ -1441,7 +1446,7 @@ static int v4l_querybuf(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_buffer *p = arg; - int ret = check_fmt(ops, p->type); + int ret = check_fmt(file, p->type); return ret ? ret : ops->vidioc_querybuf(file, fh, p); } @@ -1450,7 +1455,7 @@ static int v4l_qbuf(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_buffer *p = arg; - int ret = check_fmt(ops, p->type); + int ret = check_fmt(file, p->type); return ret ? ret : ops->vidioc_qbuf(file, fh, p); } @@ -1459,7 +1464,7 @@ static int v4l_dqbuf(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_buffer *p = arg; - int ret = check_fmt(ops, p->type); + int ret = check_fmt(file, p->type); return ret ? ret : ops->vidioc_dqbuf(file, fh, p); } @@ -1468,7 +1473,7 @@ static int v4l_create_bufs(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_create_buffers *create = arg; - int ret = check_fmt(ops, create->format.type); + int ret = check_fmt(file, create->format.type); return ret ? ret : ops->vidioc_create_bufs(file, fh, create); } @@ -1477,7 +1482,7 @@ static int v4l_prepare_buf(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_buffer *b = arg; - int ret = check_fmt(ops, b->type); + int ret = check_fmt(file, b->type); return ret ? ret : ops->vidioc_prepare_buf(file, fh, b); } @@ -1488,7 +1493,7 @@ static int v4l_g_parm(const struct v4l2_ioctl_ops *ops, struct video_device *vfd = video_devdata(file); struct v4l2_streamparm *p = arg; v4l2_std_id std; - int ret = check_fmt(ops, p->type); + int ret = check_fmt(file, p->type); if (ret) return ret; @@ -1511,7 +1516,7 @@ static int v4l_s_parm(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_streamparm *p = arg; - int ret = check_fmt(ops, p->type); + int ret = check_fmt(file, p->type); return ret ? ret : ops->vidioc_s_parm(file, fh, p); } @@ -1833,6 +1838,10 @@ static int v4l_g_sliced_vbi_cap(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_sliced_vbi_cap *p = arg; + int ret = check_fmt(file, p->type); + + if (ret) + return ret; /* Clear up to type, everything after type is zeroed already */ memset(p, 0, offsetof(struct v4l2_sliced_vbi_cap, type)); @@ -2197,6 +2206,19 @@ static int check_array_args(unsigned int cmd, void *parg, size_t *array_size, break; } + case VIDIOC_SUBDEV_G_EDID: + case VIDIOC_SUBDEV_S_EDID: { + struct v4l2_subdev_edid *edid = parg; + + if (edid->blocks) { + *user_ptr = (void __user *)edid->edid; + *kernel_ptr = (void *)&edid->edid; + *array_size = edid->blocks * 128; + ret = 1; + } + break; + } + case VIDIOC_S_EXT_CTRLS: case VIDIOC_G_EXT_CTRLS: case VIDIOC_TRY_EXT_CTRLS: { diff --git a/drivers/media/video/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c similarity index 98% rename from drivers/media/video/v4l2-mem2mem.c rename to drivers/media/v4l2-core/v4l2-mem2mem.c index 97b48318aee1826d3ad3bf5225efb93d053b02cc..3ac83583ad7ae5695e3087d2960bc88647c4e501 100644 --- a/drivers/media/video/v4l2-mem2mem.c +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c @@ -105,7 +105,7 @@ void *v4l2_m2m_next_buf(struct v4l2_m2m_queue_ctx *q_ctx) return NULL; } - b = list_entry(q_ctx->rdy_queue.next, struct v4l2_m2m_buffer, list); + b = list_first_entry(&q_ctx->rdy_queue, struct v4l2_m2m_buffer, list); spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); return &b->vb; } @@ -125,7 +125,7 @@ void *v4l2_m2m_buf_remove(struct v4l2_m2m_queue_ctx *q_ctx) spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); return NULL; } - b = list_entry(q_ctx->rdy_queue.next, struct v4l2_m2m_buffer, list); + b = list_first_entry(&q_ctx->rdy_queue, struct v4l2_m2m_buffer, list); list_del(&b->list); q_ctx->num_rdy--; spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); @@ -178,7 +178,7 @@ static void v4l2_m2m_try_run(struct v4l2_m2m_dev *m2m_dev) return; } - m2m_dev->curr_ctx = list_entry(m2m_dev->job_queue.next, + m2m_dev->curr_ctx = list_first_entry(&m2m_dev->job_queue, struct v4l2_m2m_ctx, queue); m2m_dev->curr_ctx->job_flags |= TRANS_RUNNING; spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c similarity index 98% rename from drivers/media/video/v4l2-subdev.c rename to drivers/media/v4l2-core/v4l2-subdev.c index 9182f81deb5b0177ede5b1d3280c07cc02e82188..dced41c1d993d78f72c20f0ac00592154393b206 100644 --- a/drivers/media/video/v4l2-subdev.c +++ b/drivers/media/v4l2-core/v4l2-subdev.c @@ -348,6 +348,12 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) return v4l2_subdev_call( sd, pad, set_selection, subdev_fh, sel); } + + case VIDIOC_SUBDEV_G_EDID: + return v4l2_subdev_call(sd, pad, get_edid, arg); + + case VIDIOC_SUBDEV_S_EDID: + return v4l2_subdev_call(sd, pad, set_edid, arg); #endif default: return v4l2_subdev_call(sd, core, ioctl, cmd, arg); diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/v4l2-core/videobuf-core.c similarity index 100% rename from drivers/media/video/videobuf-core.c rename to drivers/media/v4l2-core/videobuf-core.c diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/v4l2-core/videobuf-dma-contig.c similarity index 100% rename from drivers/media/video/videobuf-dma-contig.c rename to drivers/media/v4l2-core/videobuf-dma-contig.c diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/v4l2-core/videobuf-dma-sg.c similarity index 100% rename from drivers/media/video/videobuf-dma-sg.c rename to drivers/media/v4l2-core/videobuf-dma-sg.c diff --git a/drivers/media/video/videobuf-dvb.c b/drivers/media/v4l2-core/videobuf-dvb.c similarity index 96% rename from drivers/media/video/videobuf-dvb.c rename to drivers/media/v4l2-core/videobuf-dvb.c index 94d83a41381b4b4ac3200cce96da3e471cdbd56b..b7efa4516d367944e9f44c385c725f05280daf60 100644 --- a/drivers/media/video/videobuf-dvb.c +++ b/drivers/media/v4l2-core/videobuf-dvb.c @@ -139,9 +139,7 @@ static int videobuf_dvb_register_adapter(struct videobuf_dvb_frontends *fe, struct device *device, char *adapter_name, short *adapter_nr, - int mfe_shared, - int (*fe_ioctl_override)(struct dvb_frontend *, - unsigned int, void *, unsigned int)) + int mfe_shared) { int result; @@ -156,7 +154,6 @@ static int videobuf_dvb_register_adapter(struct videobuf_dvb_frontends *fe, } fe->adapter.priv = adapter_priv; fe->adapter.mfe_shared = mfe_shared; - fe->adapter.fe_ioctl_override = fe_ioctl_override; return result; } @@ -257,9 +254,7 @@ int videobuf_dvb_register_bus(struct videobuf_dvb_frontends *f, void *adapter_priv, struct device *device, short *adapter_nr, - int mfe_shared, - int (*fe_ioctl_override)(struct dvb_frontend *, - unsigned int, void *, unsigned int)) + int mfe_shared) { struct list_head *list, *q; struct videobuf_dvb_frontend *fe; @@ -273,7 +268,7 @@ int videobuf_dvb_register_bus(struct videobuf_dvb_frontends *f, /* Bring up the adapter */ res = videobuf_dvb_register_adapter(f, module, adapter_priv, device, - fe->dvb.name, adapter_nr, mfe_shared, fe_ioctl_override); + fe->dvb.name, adapter_nr, mfe_shared); if (res < 0) { printk(KERN_WARNING "videobuf_dvb_register_adapter failed (errno = %d)\n", res); return res; diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/v4l2-core/videobuf-vmalloc.c similarity index 100% rename from drivers/media/video/videobuf-vmalloc.c rename to drivers/media/v4l2-core/videobuf-vmalloc.c diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c similarity index 98% rename from drivers/media/video/videobuf2-core.c rename to drivers/media/v4l2-core/videobuf2-core.c index 268c7dd4f8231ebc2f3ca033bfea4bbc689f07f7..e6a26b433e87ffe74728a5e3b93ca353d6e1d83d 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -1738,14 +1738,17 @@ EXPORT_SYMBOL_GPL(vb2_poll); */ int vb2_queue_init(struct vb2_queue *q) { - BUG_ON(!q); - BUG_ON(!q->ops); - BUG_ON(!q->mem_ops); - BUG_ON(!q->type); - BUG_ON(!q->io_modes); - - BUG_ON(!q->ops->queue_setup); - BUG_ON(!q->ops->buf_queue); + /* + * Sanity check + */ + if (WARN_ON(!q) || + WARN_ON(!q->ops) || + WARN_ON(!q->mem_ops) || + WARN_ON(!q->type) || + WARN_ON(!q->io_modes) || + WARN_ON(!q->ops->queue_setup) || + WARN_ON(!q->ops->buf_queue)) + return -EINVAL; INIT_LIST_HEAD(&q->queued_list); INIT_LIST_HEAD(&q->done_list); @@ -2270,19 +2273,18 @@ ssize_t vb2_fop_write(struct file *file, char __user *buf, { struct video_device *vdev = video_devdata(file); struct mutex *lock = vdev->queue->lock ? vdev->queue->lock : vdev->lock; - bool must_lock = !test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags) && lock; int err = -EBUSY; - if (must_lock && mutex_lock_interruptible(lock)) + if (lock && mutex_lock_interruptible(lock)) return -ERESTARTSYS; if (vb2_queue_is_busy(vdev, file)) goto exit; err = vb2_write(vdev->queue, buf, count, ppos, file->f_flags & O_NONBLOCK); - if (err >= 0) + if (vdev->queue->fileio) vdev->queue->owner = file->private_data; exit: - if (must_lock) + if (lock) mutex_unlock(lock); return err; } @@ -2293,19 +2295,18 @@ ssize_t vb2_fop_read(struct file *file, char __user *buf, { struct video_device *vdev = video_devdata(file); struct mutex *lock = vdev->queue->lock ? vdev->queue->lock : vdev->lock; - bool must_lock = !test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags) && vdev->lock; int err = -EBUSY; - if (must_lock && mutex_lock_interruptible(lock)) + if (lock && mutex_lock_interruptible(lock)) return -ERESTARTSYS; if (vb2_queue_is_busy(vdev, file)) goto exit; err = vb2_read(vdev->queue, buf, count, ppos, file->f_flags & O_NONBLOCK); - if (err >= 0) + if (vdev->queue->fileio) vdev->queue->owner = file->private_data; exit: - if (must_lock) + if (lock) mutex_unlock(lock); return err; } @@ -2319,11 +2320,6 @@ unsigned int vb2_fop_poll(struct file *file, poll_table *wait) unsigned long req_events = poll_requested_events(wait); unsigned res; void *fileio; - /* Yuck. We really need to get rid of this flag asap. If it is - set, then the core took the serialization lock before calling - poll(). This is being phased out, but for now we have to handle - this case. */ - bool locked = test_bit(V4L2_FL_LOCK_ALL_FOPS, &vdev->flags); bool must_lock = false; /* Try to be smart: only lock if polling might start fileio, @@ -2339,9 +2335,9 @@ unsigned int vb2_fop_poll(struct file *file, poll_table *wait) /* If locking is needed, but this helper doesn't know how, then you shouldn't be using this helper but you should write your own. */ - WARN_ON(must_lock && !locked && !lock); + WARN_ON(must_lock && !lock); - if (must_lock && !locked && lock && mutex_lock_interruptible(lock)) + if (must_lock && lock && mutex_lock_interruptible(lock)) return POLLERR; fileio = q->fileio; @@ -2351,7 +2347,7 @@ unsigned int vb2_fop_poll(struct file *file, poll_table *wait) /* If fileio was started, then we have a new queue owner. */ if (must_lock && !fileio && q->fileio) q->owner = file->private_data; - if (must_lock && !locked && lock) + if (must_lock && lock) mutex_unlock(lock); return res; } diff --git a/drivers/media/video/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c similarity index 100% rename from drivers/media/video/videobuf2-dma-contig.c rename to drivers/media/v4l2-core/videobuf2-dma-contig.c diff --git a/drivers/media/video/videobuf2-dma-sg.c b/drivers/media/v4l2-core/videobuf2-dma-sg.c similarity index 100% rename from drivers/media/video/videobuf2-dma-sg.c rename to drivers/media/v4l2-core/videobuf2-dma-sg.c diff --git a/drivers/media/video/videobuf2-memops.c b/drivers/media/v4l2-core/videobuf2-memops.c similarity index 100% rename from drivers/media/video/videobuf2-memops.c rename to drivers/media/v4l2-core/videobuf2-memops.c diff --git a/drivers/media/video/videobuf2-vmalloc.c b/drivers/media/v4l2-core/videobuf2-vmalloc.c similarity index 99% rename from drivers/media/video/videobuf2-vmalloc.c rename to drivers/media/v4l2-core/videobuf2-vmalloc.c index 6b5ca6c70a46076b42cebdcee55613b02ebd2f0f..94efa04d8d55f3e4af400f0910cf791dbf9faf02 100644 --- a/drivers/media/video/videobuf2-vmalloc.c +++ b/drivers/media/v4l2-core/videobuf2-vmalloc.c @@ -18,6 +18,7 @@ #include #include +#include #include struct vb2_vmalloc_buf { diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig deleted file mode 100644 index c128fac0ce2cf4b4c0f2d7484fc21b024b3cb5ef..0000000000000000000000000000000000000000 --- a/drivers/media/video/Kconfig +++ /dev/null @@ -1,1263 +0,0 @@ -# -# Generic video config states -# - -config VIDEO_V4L2 - tristate - depends on VIDEO_DEV && VIDEO_V4L2_COMMON - default y - -config VIDEOBUF_GEN - tristate - -config VIDEOBUF_DMA_SG - depends on HAS_DMA - select VIDEOBUF_GEN - tristate - -config VIDEOBUF_VMALLOC - select VIDEOBUF_GEN - tristate - -config VIDEOBUF_DMA_CONTIG - depends on HAS_DMA - select VIDEOBUF_GEN - tristate - -config VIDEOBUF_DVB - tristate - select VIDEOBUF_GEN - -config VIDEO_BTCX - depends on PCI - tristate - -config VIDEO_TVEEPROM - tristate - depends on I2C - -config VIDEO_TUNER - tristate - depends on MEDIA_TUNER - -config V4L2_MEM2MEM_DEV - tristate - depends on VIDEOBUF2_CORE - -config VIDEOBUF2_CORE - tristate - -config VIDEOBUF2_MEMOPS - tristate - -config VIDEOBUF2_DMA_CONTIG - select VIDEOBUF2_CORE - select VIDEOBUF2_MEMOPS - tristate - -config VIDEOBUF2_VMALLOC - select VIDEOBUF2_CORE - select VIDEOBUF2_MEMOPS - tristate - - -config VIDEOBUF2_DMA_SG - #depends on HAS_DMA - select VIDEOBUF2_CORE - select VIDEOBUF2_MEMOPS - tristate -# -# Multimedia Video device configuration -# - -menuconfig VIDEO_CAPTURE_DRIVERS - bool "Video capture adapters" - depends on VIDEO_V4L2 - depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT - default y - ---help--- - Say Y here to enable selecting the video adapters for - webcams, analog TV, and hybrid analog/digital TV. - Some of those devices also supports FM radio. - -if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 - -config VIDEO_ADV_DEBUG - bool "Enable advanced debug functionality" - default n - ---help--- - Say Y here to enable advanced debugging functionality on some - V4L devices. - In doubt, say N. - -config VIDEO_FIXED_MINOR_RANGES - bool "Enable old-style fixed minor ranges for video devices" - default n - ---help--- - Say Y here to enable the old-style fixed-range minor assignments. - Only useful if you rely on the old behavior and use mknod instead of udev. - - When in doubt, say N. - -config VIDEO_HELPER_CHIPS_AUTO - bool "Autoselect pertinent encoders/decoders and other helper chips" - default y if !EXPERT - ---help--- - Most video cards may require additional modules to encode or - decode audio/video standards. This option will autoselect - all pertinent modules to each selected video module. - - Unselect this only if you know exactly what you are doing, since - it may break support on some boards. - - In doubt, say Y. - -config VIDEO_IR_I2C - tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO - depends on I2C && RC_CORE - default y - ---help--- - Most boards have an IR chip directly connected via GPIO. However, - some video boards have the IR connected via I2C bus. - - If your board doesn't have an I2C IR chip, you may disable this - option. - - In doubt, say Y. - -# -# Encoder / Decoder module configuration -# - -menu "Encoders, decoders, sensors and other helper chips" - visible if !VIDEO_HELPER_CHIPS_AUTO - -comment "Audio decoders, processors and mixers" - -config VIDEO_TVAUDIO - tristate "Simple audio decoder chips" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for several audio decoder chips found on some bt8xx boards: - Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, - tea6320, tea6420, tda8425, ta8874z. - Microchip: pic16c54 based design on ProVideo PV951 board. - - To compile this driver as a module, choose M here: the - module will be called tvaudio. - -config VIDEO_TDA7432 - tristate "Philips TDA7432 audio processor" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for tda7432 audio decoder chip found on some bt8xx boards. - - To compile this driver as a module, choose M here: the - module will be called tda7432. - -config VIDEO_TDA9840 - tristate "Philips TDA9840 audio processor" - depends on I2C - ---help--- - Support for tda9840 audio decoder chip found on some Zoran boards. - - To compile this driver as a module, choose M here: the - module will be called tda9840. - -config VIDEO_TEA6415C - tristate "Philips TEA6415C audio processor" - depends on I2C - ---help--- - Support for tea6415c audio decoder chip found on some bt8xx boards. - - To compile this driver as a module, choose M here: the - module will be called tea6415c. - -config VIDEO_TEA6420 - tristate "Philips TEA6420 audio processor" - depends on I2C - ---help--- - Support for tea6420 audio decoder chip found on some bt8xx boards. - - To compile this driver as a module, choose M here: the - module will be called tea6420. - -config VIDEO_MSP3400 - tristate "Micronas MSP34xx audio decoders" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Micronas MSP34xx series of audio decoders. - - To compile this driver as a module, choose M here: the - module will be called msp3400. - -config VIDEO_CS5345 - tristate "Cirrus Logic CS5345 audio ADC" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Cirrus Logic CS5345 24-bit, 192 kHz - stereo A/D converter. - - To compile this driver as a module, choose M here: the - module will be called cs5345. - -config VIDEO_CS53L32A - tristate "Cirrus Logic CS53L32A audio ADC" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Cirrus Logic CS53L32A low voltage - stereo A/D converter. - - To compile this driver as a module, choose M here: the - module will be called cs53l32a. - -config VIDEO_TLV320AIC23B - tristate "Texas Instruments TLV320AIC23B audio codec" - depends on VIDEO_V4L2 && I2C && EXPERIMENTAL - ---help--- - Support for the Texas Instruments TLV320AIC23B audio codec. - - To compile this driver as a module, choose M here: the - module will be called tlv320aic23b. - -config VIDEO_WM8775 - tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Wolfson Microelectronics WM8775 high - performance stereo A/D Converter with a 4 channel input mixer. - - To compile this driver as a module, choose M here: the - module will be called wm8775. - -config VIDEO_WM8739 - tristate "Wolfson Microelectronics WM8739 stereo audio ADC" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Wolfson Microelectronics WM8739 - stereo A/D Converter. - - To compile this driver as a module, choose M here: the - module will be called wm8739. - -config VIDEO_VP27SMPX - tristate "Panasonic VP27s internal MPX" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the internal MPX of the Panasonic VP27s tuner. - - To compile this driver as a module, choose M here: the - module will be called vp27smpx. - -comment "RDS decoders" - -config VIDEO_SAA6588 - tristate "SAA6588 Radio Chip RDS decoder support" - depends on VIDEO_V4L2 && I2C - - help - Support for this Radio Data System (RDS) decoder. This allows - seeing radio station identification transmitted using this - standard. - - To compile this driver as a module, choose M here: the - module will be called saa6588. - -comment "Video decoders" - -config VIDEO_ADV7180 - tristate "Analog Devices ADV7180 decoder" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Analog Devices ADV7180 video decoder. - - To compile this driver as a module, choose M here: the - module will be called adv7180. - -config VIDEO_ADV7183 - tristate "Analog Devices ADV7183 decoder" - depends on VIDEO_V4L2 && I2C - ---help--- - V4l2 subdevice driver for the Analog Devices - ADV7183 video decoder. - - To compile this driver as a module, choose M here: the - module will be called adv7183. - -config VIDEO_BT819 - tristate "BT819A VideoStream decoder" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for BT819A video decoder. - - To compile this driver as a module, choose M here: the - module will be called bt819. - -config VIDEO_BT856 - tristate "BT856 VideoStream decoder" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for BT856 video decoder. - - To compile this driver as a module, choose M here: the - module will be called bt856. - -config VIDEO_BT866 - tristate "BT866 VideoStream decoder" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for BT866 video decoder. - - To compile this driver as a module, choose M here: the - module will be called bt866. - -config VIDEO_KS0127 - tristate "KS0127 video decoder" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for KS0127 video decoder. - - This chip is used on AverMedia AVS6EYES Zoran-based MJPEG - cards. - - To compile this driver as a module, choose M here: the - module will be called ks0127. - -config VIDEO_SAA7110 - tristate "Philips SAA7110 video decoder" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Philips SAA7110 video decoders. - - To compile this driver as a module, choose M here: the - module will be called saa7110. - -config VIDEO_SAA711X - tristate "Philips SAA7111/3/4/5 video decoders" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Philips SAA7111/3/4/5 video decoders. - - To compile this driver as a module, choose M here: the - module will be called saa7115. - -config VIDEO_SAA7191 - tristate "Philips SAA7191 video decoder" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Philips SAA7191 video decoder. - - To compile this driver as a module, choose M here: the - module will be called saa7191. - -config VIDEO_TVP514X - tristate "Texas Instruments TVP514x video decoder" - depends on VIDEO_V4L2 && I2C - ---help--- - This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 - decoder. It is currently working with the TI OMAP3 camera - controller. - - To compile this driver as a module, choose M here: the - module will be called tvp514x. - -config VIDEO_TVP5150 - tristate "Texas Instruments TVP5150 video decoder" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Texas Instruments TVP5150 video decoder. - - To compile this driver as a module, choose M here: the - module will be called tvp5150. - -config VIDEO_TVP7002 - tristate "Texas Instruments TVP7002 video decoder" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Texas Instruments TVP7002 video decoder. - - To compile this driver as a module, choose M here: the - module will be called tvp7002. - -config VIDEO_VPX3220 - tristate "vpx3220a, vpx3216b & vpx3214c video decoders" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for VPX322x video decoders. - - To compile this driver as a module, choose M here: the - module will be called vpx3220. - -comment "Video and audio decoders" - -config VIDEO_SAA717X - tristate "Philips SAA7171/3/4 audio/video decoders" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Philips SAA7171/3/4 audio/video decoders. - - To compile this driver as a module, choose M here: the - module will be called saa717x. - -source "drivers/media/video/cx25840/Kconfig" - -comment "MPEG video encoders" - -config VIDEO_CX2341X - tristate "Conexant CX2341x MPEG encoders" - depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON - ---help--- - Support for the Conexant CX23416 MPEG encoders - and CX23415 MPEG encoder/decoders. - - This module currently supports the encoding functions only. - - To compile this driver as a module, choose M here: the - module will be called cx2341x. - -comment "Video encoders" - -config VIDEO_SAA7127 - tristate "Philips SAA7127/9 digital video encoders" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Philips SAA7127/9 digital video encoders. - - To compile this driver as a module, choose M here: the - module will be called saa7127. - -config VIDEO_SAA7185 - tristate "Philips SAA7185 video encoder" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Philips SAA7185 video encoder. - - To compile this driver as a module, choose M here: the - module will be called saa7185. - -config VIDEO_ADV7170 - tristate "Analog Devices ADV7170 video encoder" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Analog Devices ADV7170 video encoder driver - - To compile this driver as a module, choose M here: the - module will be called adv7170. - -config VIDEO_ADV7175 - tristate "Analog Devices ADV7175 video encoder" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Analog Devices ADV7175 video encoder driver - - To compile this driver as a module, choose M here: the - module will be called adv7175. - -config VIDEO_ADV7343 - tristate "ADV7343 video encoder" - depends on I2C - help - Support for Analog Devices I2C bus based ADV7343 encoder. - - To compile this driver as a module, choose M here: the - module will be called adv7343. - -config VIDEO_ADV7393 - tristate "ADV7393 video encoder" - depends on I2C - help - Support for Analog Devices I2C bus based ADV7393 encoder. - - To compile this driver as a module, choose M here: the - module will be called adv7393. - -config VIDEO_AK881X - tristate "AK8813/AK8814 video encoders" - depends on I2C - help - Video output driver for AKM AK8813 and AK8814 TV encoders - -comment "Camera sensor devices" - -config VIDEO_APTINA_PLL - tristate - -config VIDEO_SMIAPP_PLL - tristate - -config VIDEO_OV7670 - tristate "OmniVision OV7670 sensor support" - depends on I2C && VIDEO_V4L2 - depends on MEDIA_CAMERA_SUPPORT - ---help--- - This is a Video4Linux2 sensor-level driver for the OmniVision - OV7670 VGA camera. It currently only works with the M88ALP01 - controller. - -config VIDEO_VS6624 - tristate "ST VS6624 sensor support" - depends on VIDEO_V4L2 && I2C - depends on MEDIA_CAMERA_SUPPORT - ---help--- - This is a Video4Linux2 sensor-level driver for the ST VS6624 - camera. - - To compile this driver as a module, choose M here: the - module will be called vs6624. - -config VIDEO_MT9M032 - tristate "MT9M032 camera sensor support" - depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API - depends on MEDIA_CAMERA_SUPPORT - select VIDEO_APTINA_PLL - ---help--- - This driver supports MT9M032 camera sensors from Aptina, monochrome - models only. - -config VIDEO_MT9P031 - tristate "Aptina MT9P031 support" - depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API - depends on MEDIA_CAMERA_SUPPORT - select VIDEO_APTINA_PLL - ---help--- - This is a Video4Linux2 sensor-level driver for the Aptina - (Micron) mt9p031 5 Mpixel camera. - -config VIDEO_MT9T001 - tristate "Aptina MT9T001 support" - depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API - depends on MEDIA_CAMERA_SUPPORT - ---help--- - This is a Video4Linux2 sensor-level driver for the Aptina - (Micron) mt0t001 3 Mpixel camera. - -config VIDEO_MT9V011 - tristate "Micron mt9v011 sensor support" - depends on I2C && VIDEO_V4L2 - depends on MEDIA_CAMERA_SUPPORT - ---help--- - This is a Video4Linux2 sensor-level driver for the Micron - mt0v011 1.3 Mpixel camera. It currently only works with the - em28xx driver. - -config VIDEO_MT9V032 - tristate "Micron MT9V032 sensor support" - depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API - depends on MEDIA_CAMERA_SUPPORT - ---help--- - This is a Video4Linux2 sensor-level driver for the Micron - MT9V032 752x480 CMOS sensor. - -config VIDEO_TCM825X - tristate "TCM825x camera sensor support" - depends on I2C && VIDEO_V4L2 - depends on MEDIA_CAMERA_SUPPORT - ---help--- - This is a driver for the Toshiba TCM825x VGA camera sensor. - It is used for example in Nokia N800. - -config VIDEO_SR030PC30 - tristate "Siliconfile SR030PC30 sensor support" - depends on I2C && VIDEO_V4L2 - depends on MEDIA_CAMERA_SUPPORT - ---help--- - This driver supports SR030PC30 VGA camera from Siliconfile - -config VIDEO_NOON010PC30 - tristate "Siliconfile NOON010PC30 sensor support" - depends on I2C && VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_SUBDEV_API - depends on MEDIA_CAMERA_SUPPORT - ---help--- - This driver supports NOON010PC30 CIF camera from Siliconfile - -source "drivers/media/video/m5mols/Kconfig" - -config VIDEO_S5K6AA - tristate "Samsung S5K6AAFX sensor support" - depends on MEDIA_CAMERA_SUPPORT - depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API - ---help--- - This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M - camera sensor with an embedded SoC image signal processor. - -source "drivers/media/video/smiapp/Kconfig" - -comment "Flash devices" - -config VIDEO_ADP1653 - tristate "ADP1653 flash support" - depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER - depends on MEDIA_CAMERA_SUPPORT - ---help--- - This is a driver for the ADP1653 flash controller. It is used for - example in Nokia N900. - -config VIDEO_AS3645A - tristate "AS3645A flash driver support" - depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER - depends on MEDIA_CAMERA_SUPPORT - ---help--- - This is a driver for the AS3645A and LM3555 flash controllers. It has - build in control for flash, torch and indicator LEDs. - -comment "Video improvement chips" - -config VIDEO_UPD64031A - tristate "NEC Electronics uPD64031A Ghost Reduction" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the NEC Electronics uPD64031A Ghost Reduction - video chip. It is most often found in NTSC TV cards made for - Japan and is used to reduce the 'ghosting' effect that can - be present in analog TV broadcasts. - - To compile this driver as a module, choose M here: the - module will be called upd64031a. - -config VIDEO_UPD64083 - tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the NEC Electronics uPD64083 3-Dimensional Y/C - separation video chip. It is used to improve the quality of - the colors of a composite signal. - - To compile this driver as a module, choose M here: the - module will be called upd64083. - -comment "Miscelaneous helper chips" - -config VIDEO_THS7303 - tristate "THS7303 Video Amplifier" - depends on I2C - help - Support for TI THS7303 video amplifier - - To compile this driver as a module, choose M here: the - module will be called ths7303. - -config VIDEO_M52790 - tristate "Mitsubishi M52790 A/V switch" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Mitsubishi M52790 A/V switch. - - To compile this driver as a module, choose M here: the - module will be called m52790. - -endmenu # encoder / decoder chips - -config VIDEO_VIVI - tristate "Virtual Video Driver" - depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 - depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE - select FONT_8x16 - select VIDEOBUF2_VMALLOC - default n - ---help--- - Enables a virtual video driver. This device shows a color bar - and a timestamp, as a real device would generate by using V4L2 - api. - Say Y here if you want to test video apps or debug V4L devices. - In doubt, say N. - -# -# USB Multimedia device configuration -# - -menuconfig V4L_USB_DRIVERS - bool "V4L USB devices" - depends on USB - default y - -if V4L_USB_DRIVERS && MEDIA_CAMERA_SUPPORT - - comment "Webcam devices" - -source "drivers/media/video/uvc/Kconfig" - -source "drivers/media/video/gspca/Kconfig" - -source "drivers/media/video/pwc/Kconfig" - -source "drivers/media/video/cpia2/Kconfig" - -config USB_ZR364XX - tristate "USB ZR364XX Camera support" - depends on VIDEO_V4L2 - select VIDEOBUF_GEN - select VIDEOBUF_VMALLOC - ---help--- - Say Y here if you want to connect this type of camera to your - computer's USB port. - See for more info - and list of supported cameras. - - To compile this driver as a module, choose M here: the - module will be called zr364xx. - -config USB_STKWEBCAM - tristate "USB Syntek DC1125 Camera support" - depends on VIDEO_V4L2 && EXPERIMENTAL - ---help--- - Say Y here if you want to use this type of camera. - Supported devices are typically found in some Asus laptops, - with USB id 174f:a311 and 05e1:0501. Other Syntek cameras - may be supported by the stk11xx driver, from which this is - derived, see - - To compile this driver as a module, choose M here: the - module will be called stkwebcam. - -config USB_S2255 - tristate "USB Sensoray 2255 video capture device" - depends on VIDEO_V4L2 - select VIDEOBUF_VMALLOC - default n - help - Say Y here if you want support for the Sensoray 2255 USB device. - This driver can be compiled as a module, called s2255drv. - -source "drivers/media/video/sn9c102/Kconfig" - -endif # V4L_USB_DRIVERS && MEDIA_CAMERA_SUPPORT - -if V4L_USB_DRIVERS - - comment "Webcam and/or TV USB devices" - -source "drivers/media/video/em28xx/Kconfig" - -endif - -if V4L_USB_DRIVERS && MEDIA_ANALOG_TV_SUPPORT - - comment "TV USB devices" - -source "drivers/media/video/au0828/Kconfig" - -source "drivers/media/video/pvrusb2/Kconfig" - -source "drivers/media/video/hdpvr/Kconfig" - -source "drivers/media/video/tlg2300/Kconfig" - -source "drivers/media/video/cx231xx/Kconfig" - -source "drivers/media/video/tm6000/Kconfig" - -source "drivers/media/video/usbvision/Kconfig" - -endif # V4L_USB_DRIVERS - -# -# PCI drivers configuration - No devices here are for webcams -# - -menuconfig V4L_PCI_DRIVERS - bool "V4L PCI(e) devices" - depends on PCI - depends on MEDIA_ANALOG_TV_SUPPORT - default y - ---help--- - Say Y here to enable support for these PCI(e) drivers. - -if V4L_PCI_DRIVERS - -source "drivers/media/video/bt8xx/Kconfig" - -source "drivers/media/video/cx18/Kconfig" - -source "drivers/media/video/cx23885/Kconfig" - -source "drivers/media/video/cx25821/Kconfig" - -source "drivers/media/video/cx88/Kconfig" - -config VIDEO_HEXIUM_GEMINI - tristate "Hexium Gemini frame grabber" - depends on PCI && VIDEO_V4L2 && I2C - select VIDEO_SAA7146_VV - ---help--- - This is a video4linux driver for the Hexium Gemini frame - grabber card by Hexium. Please note that the Gemini Dual - card is *not* fully supported. - - To compile this driver as a module, choose M here: the - module will be called hexium_gemini. - -config VIDEO_HEXIUM_ORION - tristate "Hexium HV-PCI6 and Orion frame grabber" - depends on PCI && VIDEO_V4L2 && I2C - select VIDEO_SAA7146_VV - ---help--- - This is a video4linux driver for the Hexium HV-PCI6 and - Orion frame grabber cards by Hexium. - - To compile this driver as a module, choose M here: the - module will be called hexium_orion. - -source "drivers/media/video/ivtv/Kconfig" - -config VIDEO_MEYE - tristate "Sony Vaio Picturebook Motion Eye Video For Linux" - depends on PCI && SONY_LAPTOP && VIDEO_V4L2 - ---help--- - This is the video4linux driver for the Motion Eye camera found - in the Vaio Picturebook laptops. Please read the material in - for more information. - - If you say Y or M here, you need to say Y or M to "Sony Laptop - Extras" in the misc device section. - - To compile this driver as a module, choose M here: the - module will be called meye. - -config VIDEO_MXB - tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" - depends on PCI && VIDEO_V4L2 && I2C - select VIDEO_SAA7146_VV - select VIDEO_TUNER - select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO - ---help--- - This is a video4linux driver for the 'Multimedia eXtension Board' - TV card by Siemens-Nixdorf. - - To compile this driver as a module, choose M here: the - module will be called mxb. - -source "drivers/media/video/saa7134/Kconfig" - -source "drivers/media/video/saa7164/Kconfig" - -source "drivers/media/video/zoran/Kconfig" - -config STA2X11_VIP - tristate "STA2X11 VIP Video For Linux" - depends on STA2X11 - select VIDEO_ADV7180 if VIDEO_HELPER_CHIPS_AUTO - select VIDEOBUF_DMA_CONTIG - depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS - help - Say Y for support for STA2X11 VIP (Video Input Port) capture - device. - - To compile this driver as a module, choose M here: the - module will be called sta2x11_vip. - -endif # V4L_PCI_DRIVERS - -# -# ISA & parallel port drivers configuration -# All devices here are webcam or grabber devices -# - -menuconfig V4L_ISA_PARPORT_DRIVERS - bool "V4L ISA and parallel port devices" - depends on ISA || PARPORT - depends on MEDIA_CAMERA_SUPPORT - default n - ---help--- - Say Y here to enable support for these ISA and parallel port drivers. - -if V4L_ISA_PARPORT_DRIVERS - -config VIDEO_BWQCAM - tristate "Quickcam BW Video For Linux" - depends on PARPORT && VIDEO_V4L2 - help - Say Y have if you the black and white version of the QuickCam - camera. See the next option for the color version. - - To compile this driver as a module, choose M here: the - module will be called bw-qcam. - -config VIDEO_CQCAM - tristate "QuickCam Colour Video For Linux" - depends on PARPORT && VIDEO_V4L2 - help - This is the video4linux driver for the colour version of the - Connectix QuickCam. If you have one of these cameras, say Y here, - otherwise say N. This driver does not work with the original - monochrome QuickCam, QuickCam VC or QuickClip. It is also available - as a module (c-qcam). - Read for more information. - -config VIDEO_PMS - tristate "Mediavision Pro Movie Studio Video For Linux" - depends on ISA && VIDEO_V4L2 - help - Say Y if you have the ISA Mediavision Pro Movie Studio - capture card. - - To compile this driver as a module, choose M here: the - module will be called pms. - -config VIDEO_W9966 - tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" - depends on PARPORT_1284 && PARPORT && VIDEO_V4L2 - help - Video4linux driver for Winbond's w9966 based Webcams. - Currently tested with the LifeView FlyCam Supra. - If you have one of these cameras, say Y here - otherwise say N. - This driver is also available as a module (w9966). - - Check out for more - information. - -endif # V4L_ISA_PARPORT_DRIVERS - -# -# Platform drivers -# All drivers here are currently for webcam support - -menuconfig V4L_PLATFORM_DRIVERS - bool "V4L platform devices" - depends on MEDIA_CAMERA_SUPPORT - default n - ---help--- - Say Y here to enable support for platform-specific V4L drivers. - -if V4L_PLATFORM_DRIVERS - -source "drivers/media/video/marvell-ccic/Kconfig" - -config VIDEO_VIA_CAMERA - tristate "VIAFB camera controller support" - depends on FB_VIA - select VIDEOBUF_DMA_SG - select VIDEO_OV7670 - help - Driver support for the integrated camera controller in VIA - Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems - with ov7670 sensors. - -# -# Platform multimedia device configuration -# - -source "drivers/media/video/davinci/Kconfig" - -source "drivers/media/video/omap/Kconfig" - -source "drivers/media/video/blackfin/Kconfig" - -config VIDEO_SH_VOU - tristate "SuperH VOU video output driver" - depends on VIDEO_DEV && ARCH_SHMOBILE - select VIDEOBUF_DMA_CONTIG - help - Support for the Video Output Unit (VOU) on SuperH SoCs. - -config VIDEO_VIU - tristate "Freescale VIU Video Driver" - depends on VIDEO_V4L2 && PPC_MPC512x - select VIDEOBUF_DMA_CONTIG - default y - ---help--- - Support for Freescale VIU video driver. This device captures - video data, or overlays video on DIU frame buffer. - - Say Y here if you want to enable VIU device on MPC5121e Rev2+. - In doubt, say N. - -config VIDEO_TIMBERDALE - tristate "Support for timberdale Video In/LogiWIN" - depends on VIDEO_V4L2 && I2C && DMADEVICES - select DMA_ENGINE - select TIMB_DMA - select VIDEO_ADV7180 - select VIDEOBUF_DMA_CONTIG - ---help--- - Add support for the Video In peripherial of the timberdale FPGA. - -config VIDEO_VINO - tristate "SGI Vino Video For Linux" - depends on I2C && SGI_IP22 && VIDEO_V4L2 - select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO - help - Say Y here to build in support for the Vino video input system found - on SGI Indy machines. - -config VIDEO_M32R_AR - tristate "AR devices" - depends on M32R && VIDEO_V4L2 - ---help--- - This is a video4linux driver for the Renesas AR (Artificial Retina) - camera module. - -config VIDEO_M32R_AR_M64278 - tristate "AR device with color module M64278(VGA)" - depends on PLAT_M32700UT - select VIDEO_M32R_AR - ---help--- - This is a video4linux driver for the Renesas AR (Artificial - Retina) with M64278E-800 camera module. - This module supports VGA(640x480 pixels) resolutions. - - To compile this driver as a module, choose M here: the - module will be called arv. - -config VIDEO_OMAP3 - tristate "OMAP 3 Camera support (EXPERIMENTAL)" - depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL - ---help--- - Driver for an OMAP 3 camera controller. - -config VIDEO_OMAP3_DEBUG - bool "OMAP 3 Camera debug messages" - depends on VIDEO_OMAP3 - ---help--- - Enable debug messages on OMAP 3 camera controller driver. - -config SOC_CAMERA - tristate "SoC camera support" - depends on VIDEO_V4L2 && HAS_DMA && I2C - select VIDEOBUF_GEN - select VIDEOBUF2_CORE - help - SoC Camera is a common API to several cameras, not connecting - over a bus like PCI or USB. For example some i2c camera connected - directly to the data bus of an SoC. - -config SOC_CAMERA_IMX074 - tristate "imx074 support" - depends on SOC_CAMERA && I2C - help - This driver supports IMX074 cameras from Sony - -config SOC_CAMERA_MT9M001 - tristate "mt9m001 support" - depends on SOC_CAMERA && I2C - select GPIO_PCA953X if MT9M001_PCA9536_SWITCH - help - This driver supports MT9M001 cameras from Micron, monochrome - and colour models. - -config SOC_CAMERA_MT9M111 - tristate "mt9m111, mt9m112 and mt9m131 support" - depends on SOC_CAMERA && I2C - help - This driver supports MT9M111, MT9M112 and MT9M131 cameras from - Micron/Aptina - -config SOC_CAMERA_MT9T031 - tristate "mt9t031 support" - depends on SOC_CAMERA && I2C - help - This driver supports MT9T031 cameras from Micron. - -config SOC_CAMERA_MT9T112 - tristate "mt9t112 support" - depends on SOC_CAMERA && I2C - help - This driver supports MT9T112 cameras from Aptina. - -config SOC_CAMERA_MT9V022 - tristate "mt9v022 support" - depends on SOC_CAMERA && I2C - select GPIO_PCA953X if MT9V022_PCA9536_SWITCH - help - This driver supports MT9V022 cameras from Micron - -config SOC_CAMERA_RJ54N1 - tristate "rj54n1cb0c support" - depends on SOC_CAMERA && I2C - help - This is a rj54n1cb0c video driver - -config SOC_CAMERA_TW9910 - tristate "tw9910 support" - depends on SOC_CAMERA && I2C - help - This is a tw9910 video driver - -config SOC_CAMERA_PLATFORM - tristate "platform camera support" - depends on SOC_CAMERA - help - This is a generic SoC camera platform driver, useful for testing - -config SOC_CAMERA_OV2640 - tristate "ov2640 camera support" - depends on SOC_CAMERA && I2C - help - This is a ov2640 camera driver - -config SOC_CAMERA_OV5642 - tristate "ov5642 camera support" - depends on SOC_CAMERA && I2C - help - This is a V4L2 camera driver for the OmniVision OV5642 sensor - -config SOC_CAMERA_OV6650 - tristate "ov6650 sensor support" - depends on SOC_CAMERA && I2C - ---help--- - This is a V4L2 SoC camera driver for the OmniVision OV6650 sensor - -config SOC_CAMERA_OV772X - tristate "ov772x camera support" - depends on SOC_CAMERA && I2C - help - This is a ov772x camera driver - -config SOC_CAMERA_OV9640 - tristate "ov9640 camera support" - depends on SOC_CAMERA && I2C - help - This is a ov9640 camera driver - -config SOC_CAMERA_OV9740 - tristate "ov9740 camera support" - depends on SOC_CAMERA && I2C - help - This is a ov9740 camera driver - -config MX1_VIDEO - bool - -config VIDEO_MX1 - tristate "i.MX1/i.MXL CMOS Sensor Interface driver" - depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA - select FIQ - select VIDEOBUF_DMA_CONTIG - select MX1_VIDEO - ---help--- - This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface - -config MX3_VIDEO - bool - -config VIDEO_MX3 - tristate "i.MX3x Camera Sensor Interface driver" - depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA - select VIDEOBUF2_DMA_CONTIG - select MX3_VIDEO - ---help--- - This is a v4l2 driver for the i.MX3x Camera Sensor Interface - -config VIDEO_PXA27x - tristate "PXA27x Quick Capture Interface driver" - depends on VIDEO_DEV && PXA27x && SOC_CAMERA - select VIDEOBUF_DMA_SG - ---help--- - This is a v4l2 driver for the PXA27x Quick Capture Interface - -config VIDEO_SH_MOBILE_CSI2 - tristate "SuperH Mobile MIPI CSI-2 Interface driver" - depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK - ---help--- - This is a v4l2 driver for the SuperH MIPI CSI-2 Interface - -config VIDEO_SH_MOBILE_CEU - tristate "SuperH Mobile CEU Interface driver" - depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK - select VIDEOBUF2_DMA_CONTIG - ---help--- - This is a v4l2 driver for the SuperH Mobile CEU Interface - -config VIDEO_OMAP1 - tristate "OMAP1 Camera Interface driver" - depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA - select VIDEOBUF_DMA_CONTIG - select VIDEOBUF_DMA_SG - ---help--- - This is a v4l2 driver for the TI OMAP1 camera interface - -config VIDEO_OMAP2 - tristate "OMAP2 Camera Capture Interface driver" - depends on VIDEO_DEV && ARCH_OMAP2 - select VIDEOBUF_DMA_SG - ---help--- - This is a v4l2 driver for the TI OMAP2 camera capture interface - -config VIDEO_MX2_HOSTSUPPORT - bool - -config VIDEO_MX2 - tristate "i.MX27/i.MX25 Camera Sensor Interface driver" - depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25) - select VIDEOBUF2_DMA_CONTIG - select VIDEO_MX2_HOSTSUPPORT - ---help--- - This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor - Interface - -config VIDEO_ATMEL_ISI - tristate "ATMEL Image Sensor Interface (ISI) support" - depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91 - select VIDEOBUF2_DMA_CONTIG - ---help--- - This module makes the ATMEL Image Sensor Interface available - as a v4l2 device. - -source "drivers/media/video/s5p-fimc/Kconfig" -source "drivers/media/video/s5p-tv/Kconfig" - -endif # V4L_PLATFORM_DRIVERS -endif # VIDEO_CAPTURE_DRIVERS - -menuconfig V4L_MEM2MEM_DRIVERS - bool "Memory-to-memory multimedia devices" - depends on VIDEO_V4L2 - default n - ---help--- - Say Y here to enable selecting drivers for V4L devices that - use system memory for both source and destination buffers, as opposed - to capture and output drivers, which use memory buffers for just - one of those. - -if V4L_MEM2MEM_DRIVERS - -config VIDEO_MEM2MEM_TESTDEV - tristate "Virtual test device for mem2mem framework" - depends on VIDEO_DEV && VIDEO_V4L2 - select VIDEOBUF2_VMALLOC - select V4L2_MEM2MEM_DEV - default n - ---help--- - This is a virtual test device for the memory-to-memory driver - framework. - -config VIDEO_SAMSUNG_S5P_G2D - tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" - depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P - select VIDEOBUF2_DMA_CONTIG - select V4L2_MEM2MEM_DEV - default n - ---help--- - This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D - 2d graphics accelerator. - -config VIDEO_SAMSUNG_S5P_JPEG - tristate "Samsung S5P/Exynos4 JPEG codec driver (EXPERIMENTAL)" - depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P && EXPERIMENTAL - select VIDEOBUF2_DMA_CONTIG - select V4L2_MEM2MEM_DEV - ---help--- - This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec - -config VIDEO_SAMSUNG_S5P_MFC - tristate "Samsung S5P MFC 5.1 Video Codec" - depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P - select VIDEOBUF2_DMA_CONTIG - default n - help - MFC 5.1 driver for V4L2. - -config VIDEO_MX2_EMMAPRP - tristate "MX2 eMMa-PrP support" - depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27 - select VIDEOBUF2_DMA_CONTIG - select V4L2_MEM2MEM_DEV - help - MX2X chips have a PrP that can be used to process buffers from - memory to memory. Operations include resizing and format - conversion. - -endif # V4L_MEM2MEM_DRIVERS diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile deleted file mode 100644 index b7da9faa3b0ac96030983dbf1c057d2c7f88ac8e..0000000000000000000000000000000000000000 --- a/drivers/media/video/Makefile +++ /dev/null @@ -1,218 +0,0 @@ -# -# Makefile for the video capture/playback device drivers. -# - -tuner-objs := tuner-core.o - -msp3400-objs := msp3400-driver.o msp3400-kthreads.o - -stkwebcam-objs := stk-webcam.o stk-sensor.o - -omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o - -videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \ - v4l2-event.o v4l2-ctrls.o v4l2-subdev.o -ifeq ($(CONFIG_COMPAT),y) - videodev-objs += v4l2-compat-ioctl32.o -endif - -# V4L2 core modules - -obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-int-device.o -obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o - -# Helper modules - -obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o - -# All i2c modules must come first: - -obj-$(CONFIG_VIDEO_TUNER) += tuner.o -obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o -obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o -obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o -obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o -obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o -obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o -obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o -obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o -obj-$(CONFIG_VIDEO_SAA717X) += saa717x.o -obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o -obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o -obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o -obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o -obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o -obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o -obj-$(CONFIG_VIDEO_ADV7183) += adv7183.o -obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o -obj-$(CONFIG_VIDEO_ADV7393) += adv7393.o -obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o -obj-$(CONFIG_VIDEO_VS6624) += vs6624.o -obj-$(CONFIG_VIDEO_BT819) += bt819.o -obj-$(CONFIG_VIDEO_BT856) += bt856.o -obj-$(CONFIG_VIDEO_BT866) += bt866.o -obj-$(CONFIG_VIDEO_KS0127) += ks0127.o -obj-$(CONFIG_VIDEO_THS7303) += ths7303.o -obj-$(CONFIG_VIDEO_VINO) += indycam.o -obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o -obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o -obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o -obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o -obj-$(CONFIG_VIDEO_CS5345) += cs5345.o -obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o -obj-$(CONFIG_VIDEO_M52790) += m52790.o -obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o -obj-$(CONFIG_VIDEO_WM8775) += wm8775.o -obj-$(CONFIG_VIDEO_WM8739) += wm8739.o -obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o -obj-$(CONFIG_VIDEO_CX25840) += cx25840/ -obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o -obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o -obj-$(CONFIG_VIDEO_OV7670) += ov7670.o -obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o -obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o -obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o -obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o -obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o -obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o -obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o -obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o -obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o -obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/ -obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o -obj-$(CONFIG_VIDEO_SMIAPP) += smiapp/ -obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o -obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o - -obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o - -obj-$(CONFIG_SOC_CAMERA_IMX074) += imx074.o -obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o -obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o -obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o -obj-$(CONFIG_SOC_CAMERA_MT9T112) += mt9t112.o -obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o -obj-$(CONFIG_SOC_CAMERA_OV2640) += ov2640.o -obj-$(CONFIG_SOC_CAMERA_OV5642) += ov5642.o -obj-$(CONFIG_SOC_CAMERA_OV6650) += ov6650.o -obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o -obj-$(CONFIG_SOC_CAMERA_OV9640) += ov9640.o -obj-$(CONFIG_SOC_CAMERA_OV9740) += ov9740.o -obj-$(CONFIG_SOC_CAMERA_RJ54N1) += rj54n1cb0c.o -obj-$(CONFIG_SOC_CAMERA_TW9910) += tw9910.o - -# And now the v4l2 drivers: - -obj-$(CONFIG_VIDEO_BT848) += bt8xx/ -obj-$(CONFIG_VIDEO_ZORAN) += zoran/ -obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o -obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o -obj-$(CONFIG_VIDEO_W9966) += w9966.o -obj-$(CONFIG_VIDEO_PMS) += pms.o -obj-$(CONFIG_VIDEO_VINO) += vino.o -obj-$(CONFIG_VIDEO_MEYE) += meye.o -obj-$(CONFIG_VIDEO_SAA7134) += saa7134/ -obj-$(CONFIG_VIDEO_CX88) += cx88/ -obj-$(CONFIG_VIDEO_EM28XX) += em28xx/ -obj-$(CONFIG_VIDEO_TLG2300) += tlg2300/ -obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/ -obj-$(CONFIG_VIDEO_CX25821) += cx25821/ -obj-$(CONFIG_VIDEO_USBVISION) += usbvision/ -obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/ -obj-$(CONFIG_VIDEO_CPIA2) += cpia2/ -obj-$(CONFIG_VIDEO_TM6000) += tm6000/ -obj-$(CONFIG_VIDEO_MXB) += mxb.o -obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o -obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o -obj-$(CONFIG_STA2X11_VIP) += sta2x11_vip.o -obj-$(CONFIG_VIDEO_TIMBERDALE) += timblogiw.o - -obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o -obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o -obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o -obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o -obj-$(CONFIG_VIDEOBUF_DVB) += videobuf-dvb.o -obj-$(CONFIG_VIDEO_BTCX) += btcx-risc.o - -obj-$(CONFIG_VIDEOBUF2_CORE) += videobuf2-core.o -obj-$(CONFIG_VIDEOBUF2_MEMOPS) += videobuf2-memops.o -obj-$(CONFIG_VIDEOBUF2_VMALLOC) += videobuf2-vmalloc.o -obj-$(CONFIG_VIDEOBUF2_DMA_CONTIG) += videobuf2-dma-contig.o -obj-$(CONFIG_VIDEOBUF2_DMA_SG) += videobuf2-dma-sg.o - -obj-$(CONFIG_V4L2_MEM2MEM_DEV) += v4l2-mem2mem.o - -obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o - -obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o - -obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/ -obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/ - -obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o - -obj-$(CONFIG_VIDEO_OMAP3) += omap3isp/ - -obj-$(CONFIG_USB_ZR364XX) += zr364xx.o -obj-$(CONFIG_USB_STKWEBCAM) += stkwebcam.o - -obj-$(CONFIG_USB_SN9C102) += sn9c102/ -obj-$(CONFIG_USB_PWC) += pwc/ -obj-$(CONFIG_USB_GSPCA) += gspca/ - -obj-$(CONFIG_VIDEO_HDPVR) += hdpvr/ - -obj-$(CONFIG_USB_S2255) += s2255drv.o - -obj-$(CONFIG_VIDEO_IVTV) += ivtv/ -obj-$(CONFIG_VIDEO_CX18) += cx18/ - -obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o -obj-$(CONFIG_VIDEO_VIVI) += vivi.o -obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o -obj-$(CONFIG_VIDEO_CX23885) += cx23885/ - -obj-$(CONFIG_VIDEO_AK881X) += ak881x.o - -obj-$(CONFIG_VIDEO_OMAP2) += omap2cam.o -obj-$(CONFIG_SOC_CAMERA) += soc_camera.o soc_mediabus.o -obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o -# soc-camera host drivers have to be linked after camera drivers -obj-$(CONFIG_VIDEO_MX1) += mx1_camera.o -obj-$(CONFIG_VIDEO_MX2) += mx2_camera.o -obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o -obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o -obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2) += sh_mobile_csi2.o -obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o -obj-$(CONFIG_VIDEO_OMAP1) += omap1_camera.o -obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o - -obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o - -obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) += s5p-fimc/ -obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg/ -obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/ -obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV) += s5p-tv/ - -obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D) += s5p-g2d/ - -obj-$(CONFIG_BLACKFIN) += blackfin/ - -obj-$(CONFIG_ARCH_DAVINCI) += davinci/ - -obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o - -obj-$(CONFIG_VIDEO_AU0828) += au0828/ - -obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ -obj-$(CONFIG_VIDEO_SAA7164) += saa7164/ - -obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o - -obj-y += davinci/ - -obj-$(CONFIG_ARCH_OMAP) += omap/ - -ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core -ccflags-y += -I$(srctree)/drivers/media/dvb/frontends -ccflags-y += -I$(srctree)/drivers/media/common/tuners diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig deleted file mode 100644 index 7da5c2e1fc12466bd11f6c0a79502aad66cdea84..0000000000000000000000000000000000000000 --- a/drivers/media/video/bt8xx/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -config VIDEO_BT848 - tristate "BT848 Video For Linux" - depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 - select I2C_ALGOBIT - select VIDEO_BTCX - select VIDEOBUF_DMA_SG - depends on RC_CORE - select VIDEO_TUNER - select VIDEO_TVEEPROM - select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_TVAUDIO if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_TDA7432 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_SAA6588 if VIDEO_HELPER_CHIPS_AUTO - ---help--- - Support for BT848 based frame grabber/overlay boards. This includes - the Miro, Hauppauge and STB boards. Please read the material in - for more information. - - To compile this driver as a module, choose M here: the - module will be called bttv. - -config VIDEO_BT848_DVB - bool "DVB/ATSC Support for bt878 based TV cards" - depends on VIDEO_BT848 && DVB_CORE - select DVB_BT8XX - ---help--- - This adds support for DVB/ATSC cards based on the BT878 chip. diff --git a/drivers/media/video/bt8xx/Makefile b/drivers/media/video/bt8xx/Makefile deleted file mode 100644 index 3f9a2b22d3d414533dfd73a640b22fe8dc6feaa3..0000000000000000000000000000000000000000 --- a/drivers/media/video/bt8xx/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# Makefile for the video capture/playback device drivers. -# - -bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \ - bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \ - bttv-input.o bttv-audio-hook.o - -obj-$(CONFIG_VIDEO_BT848) += bttv.o - -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig deleted file mode 100644 index b391e9bda877c65d01942212fce2275781be5815..0000000000000000000000000000000000000000 --- a/drivers/media/video/cx23885/Kconfig +++ /dev/null @@ -1,46 +0,0 @@ -config VIDEO_CX23885 - tristate "Conexant cx23885 (2388x successor) support" - depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT && SND - select SND_PCM - select I2C_ALGOBIT - select VIDEO_BTCX - select VIDEO_TUNER - select VIDEO_TVEEPROM - depends on RC_CORE - select VIDEOBUF_DVB - select VIDEOBUF_DMA_SG - select VIDEO_CX25840 - select VIDEO_CX2341X - select DVB_DIB7000P if !DVB_FE_CUSTOMISE - select DVB_S5H1409 if !DVB_FE_CUSTOMISE - select DVB_S5H1411 if !DVB_FE_CUSTOMISE - select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_TDA10048 if !DVB_FE_CUSTOMISE - select DVB_LNBP21 if !DVB_FE_CUSTOMISE - select DVB_STV6110 if !DVB_FE_CUSTOMISE - select DVB_CX24116 if !DVB_FE_CUSTOMISE - select DVB_STV0900 if !DVB_FE_CUSTOMISE - select DVB_DS3000 if !DVB_FE_CUSTOMISE - select DVB_STV0367 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE - ---help--- - This is a video4linux driver for Conexant 23885 based - TV cards. - - To compile this driver as a module, choose M here: the - module will be called cx23885 - -config MEDIA_ALTERA_CI - tristate "Altera FPGA based CI module" - depends on VIDEO_CX23885 && DVB_CORE - select ALTERA_STAPL - ---help--- - An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card. - - To compile this driver as a module, choose M here: the - module will be called altera-ci diff --git a/drivers/media/video/tlg2300/Makefile b/drivers/media/video/tlg2300/Makefile deleted file mode 100644 index ea09b9af2d30b102a32fbb7b7b425dc2e079de8f..0000000000000000000000000000000000000000 --- a/drivers/media/video/tlg2300/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -poseidon-objs := pd-video.o pd-alsa.o pd-dvb.o pd-radio.o pd-main.o - -obj-$(CONFIG_VIDEO_TLG2300) += poseidon.o - -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends - diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c index b67a3018b13645f2e15f9c773f92d6f9e5acba06..ce229ea933d1388467aed017b9f65d4a2f9ef3a1 100644 --- a/drivers/mfd/88pm800.c +++ b/drivers/mfd/88pm800.c @@ -470,7 +470,8 @@ static int __devinit device_800_init(struct pm80x_chip *chip, ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0], - ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0); + ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0, + NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add onkey subdev\n"); goto out_dev; @@ -481,7 +482,7 @@ static int __devinit device_800_init(struct pm80x_chip *chip, rtc_devs[0].platform_data = pdata->rtc; rtc_devs[0].pdata_size = sizeof(struct pm80x_rtc_pdata); ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0], - ARRAY_SIZE(rtc_devs), NULL, 0); + ARRAY_SIZE(rtc_devs), NULL, 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add rtc subdev\n"); goto out_dev; diff --git a/drivers/mfd/88pm805.c b/drivers/mfd/88pm805.c index 6146583589f61b53af6918db338861f116596a5b..c20a31136f045ccd57c0c19ec62ceb6b229bc861 100644 --- a/drivers/mfd/88pm805.c +++ b/drivers/mfd/88pm805.c @@ -216,7 +216,8 @@ static int __devinit device_805_init(struct pm80x_chip *chip) } ret = mfd_add_devices(chip->dev, 0, &codec_devs[0], - ARRAY_SIZE(codec_devs), &codec_resources[0], 0); + ARRAY_SIZE(codec_devs), &codec_resources[0], 0, + NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add codec subdev\n"); goto out_codec; diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index d09918cf1b1556a74edb622e0174d3ceffdf7ca6..b73f033b2c602fadce09dd97d0c7623581962e12 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -637,7 +637,7 @@ static void __devinit device_bk_init(struct pm860x_chip *chip, bk_devs[i].resources = &bk_resources[j]; ret = mfd_add_devices(chip->dev, 0, &bk_devs[i], 1, - &bk_resources[j], 0); + &bk_resources[j], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add " "backlight subdev\n"); @@ -672,7 +672,7 @@ static void __devinit device_led_init(struct pm860x_chip *chip, led_devs[i].resources = &led_resources[j], ret = mfd_add_devices(chip->dev, 0, &led_devs[i], 1, - &led_resources[j], 0); + &led_resources[j], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add " "led subdev\n"); @@ -709,7 +709,7 @@ static void __devinit device_regulator_init(struct pm860x_chip *chip, regulator_devs[i].resources = ®ulator_resources[seq]; ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[i], 1, - ®ulator_resources[seq], 0); + ®ulator_resources[seq], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add regulator subdev\n"); goto out; @@ -733,7 +733,7 @@ static void __devinit device_rtc_init(struct pm860x_chip *chip, rtc_devs[0].resources = &rtc_resources[0]; ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0], ARRAY_SIZE(rtc_devs), &rtc_resources[0], - chip->irq_base); + chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add rtc subdev\n"); } @@ -752,7 +752,7 @@ static void __devinit device_touch_init(struct pm860x_chip *chip, touch_devs[0].resources = &touch_resources[0]; ret = mfd_add_devices(chip->dev, 0, &touch_devs[0], ARRAY_SIZE(touch_devs), &touch_resources[0], - chip->irq_base); + chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add touch subdev\n"); } @@ -770,7 +770,7 @@ static void __devinit device_power_init(struct pm860x_chip *chip, power_devs[0].num_resources = ARRAY_SIZE(battery_resources); power_devs[0].resources = &battery_resources[0], ret = mfd_add_devices(chip->dev, 0, &power_devs[0], 1, - &battery_resources[0], chip->irq_base); + &battery_resources[0], chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add battery subdev\n"); @@ -779,7 +779,7 @@ static void __devinit device_power_init(struct pm860x_chip *chip, power_devs[1].num_resources = ARRAY_SIZE(charger_resources); power_devs[1].resources = &charger_resources[0], ret = mfd_add_devices(chip->dev, 0, &power_devs[1], 1, - &charger_resources[0], chip->irq_base); + &charger_resources[0], chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add charger subdev\n"); @@ -788,7 +788,7 @@ static void __devinit device_power_init(struct pm860x_chip *chip, power_devs[2].num_resources = ARRAY_SIZE(preg_resources); power_devs[2].resources = &preg_resources[0], ret = mfd_add_devices(chip->dev, 0, &power_devs[2], 1, - &preg_resources[0], chip->irq_base); + &preg_resources[0], chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add preg subdev\n"); } @@ -802,7 +802,7 @@ static void __devinit device_onkey_init(struct pm860x_chip *chip, onkey_devs[0].resources = &onkey_resources[0], ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0], ARRAY_SIZE(onkey_devs), &onkey_resources[0], - chip->irq_base); + chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add onkey subdev\n"); } @@ -815,7 +815,8 @@ static void __devinit device_codec_init(struct pm860x_chip *chip, codec_devs[0].num_resources = ARRAY_SIZE(codec_resources); codec_devs[0].resources = &codec_resources[0], ret = mfd_add_devices(chip->dev, 0, &codec_devs[0], - ARRAY_SIZE(codec_devs), &codec_resources[0], 0); + ARRAY_SIZE(codec_devs), &codec_resources[0], 0, + NULL); if (ret < 0) dev_err(chip->dev, "Failed to add codec subdev\n"); } diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index d1facef28a60d77bc4f3eb8264e7fffeab1fc445..b1a146205c0862587aa81a4a6b32dd7b19322152 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -395,7 +395,8 @@ config MFD_TC6387XB config MFD_TC6393XB bool "Support Toshiba TC6393XB" - depends on GPIOLIB && ARM && HAVE_CLK + depends on ARM && HAVE_CLK + select GPIOLIB select MFD_CORE select MFD_TMIO help diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c index 44a3fdbadef40df1e09b12884f44caa46b76f0ac..f1beb4971f87f580090df39b38dbdc5e9937140e 100644 --- a/drivers/mfd/aat2870-core.c +++ b/drivers/mfd/aat2870-core.c @@ -424,7 +424,7 @@ static int aat2870_i2c_probe(struct i2c_client *client, } ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs, - ARRAY_SIZE(aat2870_devs), NULL, 0); + ARRAY_SIZE(aat2870_devs), NULL, 0, NULL); if (ret != 0) { dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret); goto out_disable; diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c index 4276aab4f1963bcc34eaceb94c5018e345b72a82..01781ae5d0d7f3de38c811dad727ecc179c94be7 100644 --- a/drivers/mfd/ab3100-core.c +++ b/drivers/mfd/ab3100-core.c @@ -409,8 +409,6 @@ static irqreturn_t ab3100_irq_handler(int irq, void *data) u32 fatevent; int err; - add_interrupt_randomness(irq); - err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1, event_regs, 3); if (err) @@ -936,8 +934,6 @@ static int __devinit ab3100_probe(struct i2c_client *client, IRQF_ONESHOT, "ab3100-core", ab3100); if (err) goto exit_no_irq; - /* This real unpredictable IRQ is of course sampled for entropy */ - rand_initialize_irq(client->irq); err = abx500_register_ops(&client->dev, &ab3100_ops); if (err) @@ -950,7 +946,7 @@ static int __devinit ab3100_probe(struct i2c_client *client, } err = mfd_add_devices(&client->dev, 0, ab3100_devs, - ARRAY_SIZE(ab3100_devs), NULL, 0); + ARRAY_SIZE(ab3100_devs), NULL, 0, NULL); ab3100_setup_debugfs(ab3100); diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 626b4ecaf64761fdd3cd43ac3f02986d6830e467..47adf800024e01f8cdf05856eb3b356226c527f3 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1418,25 +1418,25 @@ static int __devinit ab8500_probe(struct platform_device *pdev) ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs, ARRAY_SIZE(abx500_common_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); if (ret) goto out_freeirq; if (is_ab9540(ab8500)) ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, ARRAY_SIZE(ab9540_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); else ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs, ARRAY_SIZE(ab8500_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); if (ret) goto out_freeirq; if (is_ab9540(ab8500) || is_ab8505(ab8500)) ret = mfd_add_devices(ab8500->dev, 0, ab9540_ab8505_devs, ARRAY_SIZE(ab9540_ab8505_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); if (ret) goto out_freeirq; @@ -1444,7 +1444,7 @@ static int __devinit ab8500_probe(struct platform_device *pdev) /* Add battery management devices */ ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs, ARRAY_SIZE(ab8500_bm_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); if (ret) dev_err(ab8500->dev, "error adding bm devices\n"); } diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index c7983e862549a0b79775cae3e76c7cf0c867ad83..1b48f2094806c75fa8914657978f1b7bf814ae93 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -316,7 +316,7 @@ int __devinit arizona_dev_init(struct arizona *arizona) } ret = mfd_add_devices(arizona->dev, -1, early_devs, - ARRAY_SIZE(early_devs), NULL, 0); + ARRAY_SIZE(early_devs), NULL, 0, NULL); if (ret != 0) { dev_err(dev, "Failed to add early children: %d\n", ret); return ret; @@ -516,11 +516,11 @@ int __devinit arizona_dev_init(struct arizona *arizona) switch (arizona->type) { case WM5102: ret = mfd_add_devices(arizona->dev, -1, wm5102_devs, - ARRAY_SIZE(wm5102_devs), NULL, 0); + ARRAY_SIZE(wm5102_devs), NULL, 0, NULL); break; case WM5110: ret = mfd_add_devices(arizona->dev, -1, wm5110_devs, - ARRAY_SIZE(wm5102_devs), NULL, 0); + ARRAY_SIZE(wm5102_devs), NULL, 0, NULL); break; } diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index 383421bf57609a994b7f8d537f97c269d2ab6302..62f0883a7630c360ab9e52f9fa11f306d1a3efee 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -913,18 +913,19 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, if (pdata->clock_rate) { ds1wm_pdata.clock_rate = pdata->clock_rate; ret = mfd_add_devices(&pdev->dev, pdev->id, - &asic3_cell_ds1wm, 1, mem, asic->irq_base); + &asic3_cell_ds1wm, 1, mem, asic->irq_base, NULL); if (ret < 0) goto out; } if (mem_sdio && (irq >= 0)) { ret = mfd_add_devices(&pdev->dev, pdev->id, - &asic3_cell_mmc, 1, mem_sdio, irq); + &asic3_cell_mmc, 1, mem_sdio, irq, NULL); if (ret < 0) goto out; } + ret = 0; if (pdata->leds) { int i; @@ -933,7 +934,7 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, asic3_cell_leds[i].pdata_size = sizeof(pdata->leds[i]); } ret = mfd_add_devices(&pdev->dev, 0, - asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0); + asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0, NULL); } out: diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c index 3419e726de478cb330801d1dfb1db42d2a5d1748..2b282133c725b1b6fbb9c0f10442760640bfcd47 100644 --- a/drivers/mfd/cs5535-mfd.c +++ b/drivers/mfd/cs5535-mfd.c @@ -149,7 +149,7 @@ static int __devinit cs5535_mfd_probe(struct pci_dev *pdev, } err = mfd_add_devices(&pdev->dev, -1, cs5535_mfd_cells, - ARRAY_SIZE(cs5535_mfd_cells), NULL, 0); + ARRAY_SIZE(cs5535_mfd_cells), NULL, 0, NULL); if (err) { dev_err(&pdev->dev, "MFD add devices failed: %d\n", err); goto err_disable; diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c index 2544910e1fd604f5f6184009a1a208fa5f838cf2..a0a62b24621b831cb0c7c43e62692bd061eb7163 100644 --- a/drivers/mfd/da9052-core.c +++ b/drivers/mfd/da9052-core.c @@ -803,7 +803,7 @@ int __devinit da9052_device_init(struct da9052 *da9052, u8 chip_id) dev_err(da9052->dev, "DA9052 ADC IRQ failed ret=%d\n", ret); ret = mfd_add_devices(da9052->dev, -1, da9052_subdev_info, - ARRAY_SIZE(da9052_subdev_info), NULL, 0); + ARRAY_SIZE(da9052_subdev_info), NULL, 0, NULL); if (ret) goto err; diff --git a/drivers/mfd/davinci_voicecodec.c b/drivers/mfd/davinci_voicecodec.c index 4e2af2cb2d26a76534c884c3cc57fe97f3c30d52..45e83a68641b81d0a5f7605b19027e2cd5b1aec0 100644 --- a/drivers/mfd/davinci_voicecodec.c +++ b/drivers/mfd/davinci_voicecodec.c @@ -129,7 +129,7 @@ static int __init davinci_vc_probe(struct platform_device *pdev) cell->pdata_size = sizeof(*davinci_vc); ret = mfd_add_devices(&pdev->dev, pdev->id, davinci_vc->cells, - DAVINCI_VC_CELLS, NULL, 0); + DAVINCI_VC_CELLS, NULL, 0, NULL); if (ret != 0) { dev_err(&pdev->dev, "fail to register client devices\n"); goto fail4; diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 7040a0081130c93ce6b73145355abec0a8c571b8..0e63cdd9b52abc44666c57994623e120f11644b2 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -3010,7 +3010,7 @@ static int __devinit db8500_prcmu_probe(struct platform_device *pdev) prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs, - ARRAY_SIZE(db8500_prcmu_devs), NULL, 0); + ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, NULL); if (err) { pr_err("prcmu: Failed to add subdevices\n"); return err; diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c index 43a76c41cfcc9fe39084dd2967eaba23a4e87a52..db662e2dcfa5ba3cae4cd07694dc0caa95e72d80 100644 --- a/drivers/mfd/ezx-pcap.c +++ b/drivers/mfd/ezx-pcap.c @@ -202,7 +202,7 @@ static void pcap_isr_work(struct work_struct *work) } local_irq_enable(); ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr); - } while (gpio_get_value(irq_to_gpio(pcap->spi->irq))); + } while (gpio_get_value(pdata->gpio)); } static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc) diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c index 04c7093d6499cb88f330b2f768713e49e58c9ffc..9e5453d21a6806263d17bc6ada0c07a3a2a7013a 100644 --- a/drivers/mfd/htc-pasic3.c +++ b/drivers/mfd/htc-pasic3.c @@ -168,7 +168,7 @@ static int __init pasic3_probe(struct platform_device *pdev) /* the first 5 PASIC3 registers control the DS1WM */ ds1wm_resources[0].end = (5 << asic->bus_shift) - 1; ret = mfd_add_devices(&pdev->dev, pdev->id, - &ds1wm_cell, 1, r, irq); + &ds1wm_cell, 1, r, irq, NULL); if (ret < 0) dev_warn(dev, "failed to register DS1WM\n"); } @@ -176,7 +176,8 @@ static int __init pasic3_probe(struct platform_device *pdev) if (pdata && pdata->led_pdata) { led_cell.platform_data = pdata->led_pdata; led_cell.pdata_size = sizeof(struct pasic3_leds_machinfo); - ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, 0); + ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, + 0, NULL); if (ret < 0) dev_warn(dev, "failed to register LED device\n"); } diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c index 59df5584cb58f54a25a424ca2551417a231fcb4d..266bdc5bd96d17ea1bc05967d911aa4b9b7fc8bb 100644 --- a/drivers/mfd/intel_msic.c +++ b/drivers/mfd/intel_msic.c @@ -344,13 +344,13 @@ static int __devinit intel_msic_init_devices(struct intel_msic *msic) continue; ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL, - pdata->irq[i]); + pdata->irq[i], NULL); if (ret) goto fail; } ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs, - ARRAY_SIZE(msic_other_devs), NULL, 0); + ARRAY_SIZE(msic_other_devs), NULL, 0, NULL); if (ret) goto fail; diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c index 2ea99989551af85a4796c69e5fc2b65ba7a951e9..965c4801df8a1765e069ecb8707df451984b080a 100644 --- a/drivers/mfd/janz-cmodio.c +++ b/drivers/mfd/janz-cmodio.c @@ -147,7 +147,7 @@ static int __devinit cmodio_probe_submodules(struct cmodio_device *priv) } return mfd_add_devices(&pdev->dev, 0, priv->cells, - num_probed, NULL, pdev->irq); + num_probed, NULL, pdev->irq, NULL); } /* diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c index 87662a17dec62d527a3af1b8b7fb8c782c85dd92..c6b6d7dda517528081a9e3f7e96d96458846ef67 100644 --- a/drivers/mfd/jz4740-adc.c +++ b/drivers/mfd/jz4740-adc.c @@ -287,7 +287,8 @@ static int __devinit jz4740_adc_probe(struct platform_device *pdev) writeb(0xff, adc->base + JZ_REG_ADC_CTRL); ret = mfd_add_devices(&pdev->dev, 0, jz4740_adc_cells, - ARRAY_SIZE(jz4740_adc_cells), mem_base, irq_base); + ARRAY_SIZE(jz4740_adc_cells), mem_base, + irq_base, NULL); if (ret < 0) goto err_clk_put; diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c index 0b2879b87fd999f537bbfc652da9a29c90eb1042..24212f45b201458961373df48c08d9a1f7f9536d 100644 --- a/drivers/mfd/lm3533-core.c +++ b/drivers/mfd/lm3533-core.c @@ -393,7 +393,8 @@ static int __devinit lm3533_device_als_init(struct lm3533 *lm3533) lm3533_als_devs[0].platform_data = pdata->als; lm3533_als_devs[0].pdata_size = sizeof(*pdata->als); - ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL, 0); + ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL, + 0, NULL); if (ret) { dev_err(lm3533->dev, "failed to add ALS device\n"); return ret; @@ -422,7 +423,7 @@ static int __devinit lm3533_device_bl_init(struct lm3533 *lm3533) } ret = mfd_add_devices(lm3533->dev, 0, lm3533_bl_devs, - pdata->num_backlights, NULL, 0); + pdata->num_backlights, NULL, 0, NULL); if (ret) { dev_err(lm3533->dev, "failed to add backlight devices\n"); return ret; @@ -451,7 +452,7 @@ static int __devinit lm3533_device_led_init(struct lm3533 *lm3533) } ret = mfd_add_devices(lm3533->dev, 0, lm3533_led_devs, - pdata->num_leds, NULL, 0); + pdata->num_leds, NULL, 0, NULL); if (ret) { dev_err(lm3533->dev, "failed to add LED devices\n"); return ret; diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index 027cc8f861324de8f10bc7e9a1aa66af9e6ef093..092ad4b44b6d67b9b4ee039fccc73da1748d3a2c 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -750,7 +750,7 @@ static int __devinit lpc_ich_init_gpio(struct pci_dev *dev, lpc_ich_finalize_cell(&lpc_ich_cells[LPC_GPIO], id); ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_GPIO], - 1, NULL, 0); + 1, NULL, 0, NULL); gpio_done: if (acpi_conflict) @@ -765,7 +765,6 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, u32 base_addr_cfg; u32 base_addr; int ret; - bool acpi_conflict = false; struct resource *res; /* Setup power management base register */ @@ -780,20 +779,11 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, res = wdt_io_res(ICH_RES_IO_TCO); res->start = base_addr + ACPIBASE_TCO_OFF; res->end = base_addr + ACPIBASE_TCO_END; - ret = acpi_check_resource_conflict(res); - if (ret) { - acpi_conflict = true; - goto wdt_done; - } res = wdt_io_res(ICH_RES_IO_SMI); res->start = base_addr + ACPIBASE_SMI_OFF; res->end = base_addr + ACPIBASE_SMI_END; - ret = acpi_check_resource_conflict(res); - if (ret) { - acpi_conflict = true; - goto wdt_done; - } + lpc_ich_enable_acpi_space(dev); /* @@ -813,21 +803,13 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, res = wdt_mem_res(ICH_RES_MEM_GCS); res->start = base_addr + ACPIBASE_GCS_OFF; res->end = base_addr + ACPIBASE_GCS_END; - ret = acpi_check_resource_conflict(res); - if (ret) { - acpi_conflict = true; - goto wdt_done; - } } lpc_ich_finalize_cell(&lpc_ich_cells[LPC_WDT], id); ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_WDT], - 1, NULL, 0); + 1, NULL, 0, NULL); wdt_done: - if (acpi_conflict) - pr_warn("Resource conflict(s) found affecting %s\n", - lpc_ich_cells[LPC_WDT].name); return ret; } diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c index 9f20abc5e3937065238ff1f3240c27cde9cbb4f6..f6b9c5c96b24f7d68e80b9ca2db8f202c2e3dd91 100644 --- a/drivers/mfd/lpc_sch.c +++ b/drivers/mfd/lpc_sch.c @@ -127,7 +127,8 @@ static int __devinit lpc_sch_probe(struct pci_dev *dev, lpc_sch_cells[i].id = id->device; ret = mfd_add_devices(&dev->dev, 0, - lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, 0); + lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, + 0, NULL); if (ret) goto out_dev; @@ -153,7 +154,8 @@ static int __devinit lpc_sch_probe(struct pci_dev *dev, tunnelcreek_cells[i].id = id->device; ret = mfd_add_devices(&dev->dev, 0, tunnelcreek_cells, - ARRAY_SIZE(tunnelcreek_cells), NULL, 0); + ARRAY_SIZE(tunnelcreek_cells), NULL, + 0, NULL); } return ret; diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index c03e12b51924060704641c0152ad6e629d167a72..d9e24c849a00a3f21aad864442293aa2db0ca64d 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -126,7 +126,7 @@ static int max77686_i2c_probe(struct i2c_client *i2c, max77686_irq_init(max77686); ret = mfd_add_devices(max77686->dev, -1, max77686_devs, - ARRAY_SIZE(max77686_devs), NULL, 0); + ARRAY_SIZE(max77686_devs), NULL, 0, NULL); if (ret < 0) goto err_mfd; diff --git a/drivers/mfd/max77693-irq.c b/drivers/mfd/max77693-irq.c index 2b403569e0a6411a92c0e7cb66c7d703d60cc0cf..1029d018c73921828f34740b4034c0cd7df5c3bd 100644 --- a/drivers/mfd/max77693-irq.c +++ b/drivers/mfd/max77693-irq.c @@ -137,6 +137,9 @@ static void max77693_irq_mask(struct irq_data *data) const struct max77693_irq_data *irq_data = irq_to_max77693_irq(max77693, data->irq); + if (irq_data->group >= MAX77693_IRQ_GROUP_NR) + return; + if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3) max77693->irq_masks_cur[irq_data->group] &= ~irq_data->mask; else @@ -149,6 +152,9 @@ static void max77693_irq_unmask(struct irq_data *data) const struct max77693_irq_data *irq_data = irq_to_max77693_irq(max77693, data->irq); + if (irq_data->group >= MAX77693_IRQ_GROUP_NR) + return; + if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3) max77693->irq_masks_cur[irq_data->group] |= irq_data->mask; else @@ -200,7 +206,7 @@ static irqreturn_t max77693_irq_thread(int irq, void *data) if (irq_src & MAX77693_IRQSRC_MUIC) /* MUIC INT1 ~ INT3 */ - max77693_bulk_read(max77693->regmap, MAX77693_MUIC_REG_INT1, + max77693_bulk_read(max77693->regmap_muic, MAX77693_MUIC_REG_INT1, MAX77693_NUM_IRQ_MUIC_REGS, &irq_reg[MUIC_INT1]); /* Apply masking */ @@ -255,7 +261,8 @@ int max77693_irq_init(struct max77693_dev *max77693) { struct irq_domain *domain; int i; - int ret; + int ret = 0; + u8 intsrc_mask; mutex_init(&max77693->irqlock); @@ -287,19 +294,38 @@ int max77693_irq_init(struct max77693_dev *max77693) &max77693_irq_domain_ops, max77693); if (!domain) { dev_err(max77693->dev, "could not create irq domain\n"); - return -ENODEV; + ret = -ENODEV; + goto err_irq; } max77693->irq_domain = domain; + /* Unmask max77693 interrupt */ + ret = max77693_read_reg(max77693->regmap, + MAX77693_PMIC_REG_INTSRC_MASK, &intsrc_mask); + if (ret < 0) { + dev_err(max77693->dev, "fail to read PMIC register\n"); + goto err_irq; + } + + intsrc_mask &= ~(MAX77693_IRQSRC_CHG); + intsrc_mask &= ~(MAX77693_IRQSRC_FLASH); + intsrc_mask &= ~(MAX77693_IRQSRC_MUIC); + ret = max77693_write_reg(max77693->regmap, + MAX77693_PMIC_REG_INTSRC_MASK, intsrc_mask); + if (ret < 0) { + dev_err(max77693->dev, "fail to write PMIC register\n"); + goto err_irq; + } + ret = request_threaded_irq(max77693->irq, NULL, max77693_irq_thread, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "max77693-irq", max77693); - if (ret) dev_err(max77693->dev, "Failed to request IRQ %d: %d\n", max77693->irq, ret); - return 0; +err_irq: + return ret; } void max77693_irq_exit(struct max77693_dev *max77693) diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index a1811cb50ec75fc7c1dffd02aca98f132d7e4810..cc5155e20494726c2ae6954e64128f61973ebafd 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -152,6 +152,20 @@ static int max77693_i2c_probe(struct i2c_client *i2c, max77693->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC); i2c_set_clientdata(max77693->haptic, max77693); + /* + * Initialize register map for MUIC device because use regmap-muic + * instance of MUIC device when irq of max77693 is initialized + * before call max77693-muic probe() function. + */ + max77693->regmap_muic = devm_regmap_init_i2c(max77693->muic, + &max77693_regmap_config); + if (IS_ERR(max77693->regmap_muic)) { + ret = PTR_ERR(max77693->regmap_muic); + dev_err(max77693->dev, + "failed to allocate register map: %d\n", ret); + goto err_regmap; + } + ret = max77693_irq_init(max77693); if (ret < 0) goto err_irq; @@ -159,7 +173,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, pm_runtime_set_active(max77693->dev); ret = mfd_add_devices(max77693->dev, -1, max77693_devs, - ARRAY_SIZE(max77693_devs), NULL, 0); + ARRAY_SIZE(max77693_devs), NULL, 0, NULL); if (ret < 0) goto err_mfd; diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c index 825a7f06d9ba5ade6281810bec19c209187561b2..ee53757beca7e8344c15a66bbe5d51bcce7b9da1 100644 --- a/drivers/mfd/max8925-core.c +++ b/drivers/mfd/max8925-core.c @@ -598,7 +598,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0], ARRAY_SIZE(rtc_devs), - &rtc_resources[0], chip->irq_base); + &rtc_resources[0], chip->irq_base, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add rtc subdev\n"); goto out; @@ -606,7 +606,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0], ARRAY_SIZE(onkey_devs), - &onkey_resources[0], 0); + &onkey_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add onkey subdev\n"); goto out_dev; @@ -615,7 +615,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, if (pdata) { ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[0], ARRAY_SIZE(regulator_devs), - ®ulator_resources[0], 0); + ®ulator_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add regulator subdev\n"); goto out_dev; @@ -625,7 +625,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, if (pdata && pdata->backlight) { ret = mfd_add_devices(chip->dev, 0, &backlight_devs[0], ARRAY_SIZE(backlight_devs), - &backlight_resources[0], 0); + &backlight_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add backlight subdev\n"); goto out_dev; @@ -635,7 +635,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, if (pdata && pdata->power) { ret = mfd_add_devices(chip->dev, 0, &power_devs[0], ARRAY_SIZE(power_devs), - &power_supply_resources[0], 0); + &power_supply_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add power supply " "subdev\n"); @@ -646,7 +646,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, if (pdata && pdata->touch) { ret = mfd_add_devices(chip->dev, 0, &touch_devs[0], ARRAY_SIZE(touch_devs), - &touch_resources[0], 0); + &touch_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add touch subdev\n"); goto out_dev; diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c index 10b629c245b6770d304dde9bf978891c2a5ac800..f123517065ec911ff6e4154aa25a3f8e1dd0bd98 100644 --- a/drivers/mfd/max8997.c +++ b/drivers/mfd/max8997.c @@ -160,7 +160,7 @@ static int max8997_i2c_probe(struct i2c_client *i2c, mfd_add_devices(max8997->dev, -1, max8997_devs, ARRAY_SIZE(max8997_devs), - NULL, 0); + NULL, 0, NULL); /* * TODO: enable others (flash, muic, rtc, battery, ...) and diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c index 6ef56d28c05686bf298f589cebf91c43fcc707b8..d7218cc90945a643ee03cc670852d42078131503 100644 --- a/drivers/mfd/max8998.c +++ b/drivers/mfd/max8998.c @@ -161,13 +161,13 @@ static int max8998_i2c_probe(struct i2c_client *i2c, switch (id->driver_data) { case TYPE_LP3974: ret = mfd_add_devices(max8998->dev, -1, - lp3974_devs, ARRAY_SIZE(lp3974_devs), - NULL, 0); + lp3974_devs, ARRAY_SIZE(lp3974_devs), + NULL, 0, NULL); break; case TYPE_MAX8998: ret = mfd_add_devices(max8998->dev, -1, - max8998_devs, ARRAY_SIZE(max8998_devs), - NULL, 0); + max8998_devs, ARRAY_SIZE(max8998_devs), + NULL, 0, NULL); break; default: ret = -EINVAL; diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index b801dc72f041a125fcf9a52e25e6d594ee052d92..1ec79b54bd2f12f304c57f92633cc8c125a0d389 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -612,7 +612,7 @@ static int mc13xxx_add_subdevice_pdata(struct mc13xxx *mc13xxx, if (!cell.name) return -ENOMEM; - return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0); + return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0, NULL); } static int mc13xxx_add_subdevice(struct mc13xxx *mc13xxx, const char *format) diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 0c3a01cde2f7615960fb2c9cc20ba7489bf00fbd..f8b77711ad2da4c26acade369d0bc6443631427b 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -74,12 +74,11 @@ static int mfd_platform_add_cell(struct platform_device *pdev, static int mfd_add_device(struct device *parent, int id, const struct mfd_cell *cell, struct resource *mem_base, - int irq_base) + int irq_base, struct irq_domain *domain) { struct resource *res; struct platform_device *pdev; struct device_node *np = NULL; - struct irq_domain *domain = NULL; int ret = -ENOMEM; int r; @@ -97,7 +96,6 @@ static int mfd_add_device(struct device *parent, int id, for_each_child_of_node(parent->of_node, np) { if (of_device_is_compatible(np, cell->of_compatible)) { pdev->dev.of_node = np; - domain = irq_find_host(parent->of_node); break; } } @@ -177,7 +175,7 @@ static int mfd_add_device(struct device *parent, int id, int mfd_add_devices(struct device *parent, int id, struct mfd_cell *cells, int n_devs, struct resource *mem_base, - int irq_base) + int irq_base, struct irq_domain *domain) { int i; int ret = 0; @@ -191,7 +189,8 @@ int mfd_add_devices(struct device *parent, int id, for (i = 0; i < n_devs; i++) { atomic_set(&cnts[i], 0); cells[i].usage_count = &cnts[i]; - ret = mfd_add_device(parent, id, cells + i, mem_base, irq_base); + ret = mfd_add_device(parent, id, cells + i, mem_base, + irq_base, domain); if (ret) break; } @@ -247,7 +246,8 @@ int mfd_clone_cell(const char *cell, const char **clones, size_t n_clones) for (i = 0; i < n_clones; i++) { cell_entry.name = clones[i]; /* don't give up if a single call fails; just report error */ - if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0)) + if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0, + NULL)) dev_err(dev, "failed to create platform device '%s'\n", clones[i]); } diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c index c4a69f193a1df1985abfbaeeffb8e39cda933493..a345f9bb7b4758765725cf2c056303950ecc1c02 100644 --- a/drivers/mfd/palmas.c +++ b/drivers/mfd/palmas.c @@ -453,7 +453,8 @@ static int __devinit palmas_i2c_probe(struct i2c_client *i2c, ret = mfd_add_devices(palmas->dev, -1, children, ARRAY_SIZE(palmas_children), - NULL, regmap_irq_chip_get_base(palmas->irq_data)); + NULL, regmap_irq_chip_get_base(palmas->irq_data), + NULL); kfree(children); if (ret < 0) diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c index cdc1df7fa0e94d10a26059c18dd347c045dcf2cd..3a8fa88567b18385461fbed0bbc9ff30e8d0fffc 100644 --- a/drivers/mfd/rc5t583.c +++ b/drivers/mfd/rc5t583.c @@ -289,7 +289,7 @@ static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c, } ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs, - ARRAY_SIZE(rc5t583_subdevs), NULL, 0); + ARRAY_SIZE(rc5t583_subdevs), NULL, 0, NULL); if (ret) { dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret); goto err_add_devs; diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c index 685d61e431adfa4f8b733a13bd5c93cfb71c9a44..0f70dce611605fb5e92419c5ac393c2079b74833 100644 --- a/drivers/mfd/rdc321x-southbridge.c +++ b/drivers/mfd/rdc321x-southbridge.c @@ -87,7 +87,8 @@ static int __devinit rdc321x_sb_probe(struct pci_dev *pdev, rdc321x_wdt_pdata.sb_pdev = pdev; return mfd_add_devices(&pdev->dev, -1, - rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), NULL, 0); + rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), + NULL, 0, NULL); } static void __devexit rdc321x_sb_remove(struct pci_dev *pdev) diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 2988efde11ebc60b6a714044f79d6a7cd9a44dba..49d361a618d06f5f26d17c49a8c9d48e20547caf 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -141,19 +141,19 @@ static int sec_pmic_probe(struct i2c_client *i2c, switch (sec_pmic->device_type) { case S5M8751X: ret = mfd_add_devices(sec_pmic->dev, -1, s5m8751_devs, - ARRAY_SIZE(s5m8751_devs), NULL, 0); + ARRAY_SIZE(s5m8751_devs), NULL, 0, NULL); break; case S5M8763X: ret = mfd_add_devices(sec_pmic->dev, -1, s5m8763_devs, - ARRAY_SIZE(s5m8763_devs), NULL, 0); + ARRAY_SIZE(s5m8763_devs), NULL, 0, NULL); break; case S5M8767X: ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs, - ARRAY_SIZE(s5m8767_devs), NULL, 0); + ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL); break; case S2MPS11X: ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs, - ARRAY_SIZE(s2mps11_devs), NULL, 0); + ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL); break; default: /* If this happens the probe function is problem */ diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c index d31fed07aefbc51bfb620c492a2f05197886eb36..d35da6820beae8ee2c7e01e1faf51cc48c96972b 100644 --- a/drivers/mfd/sta2x11-mfd.c +++ b/drivers/mfd/sta2x11-mfd.c @@ -407,7 +407,7 @@ static int __devinit sta2x11_mfd_probe(struct pci_dev *pdev, sta2x11_mfd_bar0, ARRAY_SIZE(sta2x11_mfd_bar0), &pdev->resource[0], - 0); + 0, NULL); if (err) { dev_err(&pdev->dev, "mfd_add_devices[0] failed: %d\n", err); goto err_disable; @@ -417,7 +417,7 @@ static int __devinit sta2x11_mfd_probe(struct pci_dev *pdev, sta2x11_mfd_bar1, ARRAY_SIZE(sta2x11_mfd_bar1), &pdev->resource[1], - 0); + 0, NULL); if (err) { dev_err(&pdev->dev, "mfd_add_devices[1] failed: %d\n", err); goto err_disable; diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 2dd8d49cb30bc7d63d14250e673b2c12eb4cef3f..c94f521f392cb0b5214385ff57ac6e18e8762907 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -962,7 +962,7 @@ static int __devinit stmpe_add_device(struct stmpe *stmpe, struct mfd_cell *cell, int irq) { return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1, - NULL, stmpe->irq_base + irq); + NULL, stmpe->irq_base + irq, NULL); } static int __devinit stmpe_devices_init(struct stmpe *stmpe) diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c index 2d9e8799e733c6644c18aa9335e9796ef0c0709f..b32940ec903425d37010b79eed9a16e4b3c20761 100644 --- a/drivers/mfd/t7l66xb.c +++ b/drivers/mfd/t7l66xb.c @@ -388,7 +388,7 @@ static int t7l66xb_probe(struct platform_device *dev) ret = mfd_add_devices(&dev->dev, dev->id, t7l66xb_cells, ARRAY_SIZE(t7l66xb_cells), - iomem, t7l66xb->irq_base); + iomem, t7l66xb->irq_base, NULL); if (!ret) return 0; diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c index 048bf0532a095014e03358b01af1f4cd58585b97..b56ba6b43294b77e536b12247c0e8b1d18085701 100644 --- a/drivers/mfd/tc3589x.c +++ b/drivers/mfd/tc3589x.c @@ -262,8 +262,8 @@ static int __devinit tc3589x_device_init(struct tc3589x *tc3589x) if (blocks & TC3589x_BLOCK_GPIO) { ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio, - ARRAY_SIZE(tc3589x_dev_gpio), NULL, - tc3589x->irq_base); + ARRAY_SIZE(tc3589x_dev_gpio), NULL, + tc3589x->irq_base, NULL); if (ret) { dev_err(tc3589x->dev, "failed to add gpio child\n"); return ret; @@ -273,8 +273,8 @@ static int __devinit tc3589x_device_init(struct tc3589x *tc3589x) if (blocks & TC3589x_BLOCK_KEYPAD) { ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad, - ARRAY_SIZE(tc3589x_dev_keypad), NULL, - tc3589x->irq_base); + ARRAY_SIZE(tc3589x_dev_keypad), NULL, + tc3589x->irq_base, NULL); if (ret) { dev_err(tc3589x->dev, "failed to keypad child\n"); return ret; diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c index d20a284ad4baca528c36eb351200ff16fdd5282e..413c891102f867d32b3bd62b25bb02120fe0159e 100644 --- a/drivers/mfd/tc6387xb.c +++ b/drivers/mfd/tc6387xb.c @@ -192,7 +192,7 @@ static int __devinit tc6387xb_probe(struct platform_device *dev) printk(KERN_INFO "Toshiba tc6387xb initialised\n"); ret = mfd_add_devices(&dev->dev, dev->id, tc6387xb_cells, - ARRAY_SIZE(tc6387xb_cells), iomem, irq); + ARRAY_SIZE(tc6387xb_cells), iomem, irq, NULL); if (!ret) return 0; diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 9612264f0e6dcf7832ebf2f4736815b4eabc6a4b..dcab026fcbb25070a7c79c8e2601b3b911079367 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -700,8 +700,8 @@ static int __devinit tc6393xb_probe(struct platform_device *dev) tc6393xb_cells[TC6393XB_CELL_FB].pdata_size = sizeof(*tcpd->fb_data); ret = mfd_add_devices(&dev->dev, dev->id, - tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells), - iomem, tcpd->irq_base); + tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells), + iomem, tcpd->irq_base, NULL); if (!ret) return 0; diff --git a/drivers/mfd/ti-ssp.c b/drivers/mfd/ti-ssp.c index 4fb0e6c8e8fe0fbfee94299b7c0de45920621a25..7c3675a74f93414c806543f4c50bc44cbb8ad46f 100644 --- a/drivers/mfd/ti-ssp.c +++ b/drivers/mfd/ti-ssp.c @@ -412,7 +412,7 @@ static int __devinit ti_ssp_probe(struct platform_device *pdev) cells[id].data_size = data->pdata_size; } - error = mfd_add_devices(dev, 0, cells, 2, NULL, 0); + error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL); if (error < 0) { dev_err(dev, "cannot add mfd cells\n"); goto error_enable; diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c index a447f4ec11fb757ee38755aa44da467f83229d1f..cccc626c83c80c2bf79cf03c89936d5249a44714 100644 --- a/drivers/mfd/timberdale.c +++ b/drivers/mfd/timberdale.c @@ -757,25 +757,25 @@ static int __devinit timb_probe(struct pci_dev *dev, err = mfd_add_devices(&dev->dev, -1, timberdale_cells_bar0_cfg0, ARRAY_SIZE(timberdale_cells_bar0_cfg0), - &dev->resource[0], msix_entries[0].vector); + &dev->resource[0], msix_entries[0].vector, NULL); break; case TIMB_HW_VER1: err = mfd_add_devices(&dev->dev, -1, timberdale_cells_bar0_cfg1, ARRAY_SIZE(timberdale_cells_bar0_cfg1), - &dev->resource[0], msix_entries[0].vector); + &dev->resource[0], msix_entries[0].vector, NULL); break; case TIMB_HW_VER2: err = mfd_add_devices(&dev->dev, -1, timberdale_cells_bar0_cfg2, ARRAY_SIZE(timberdale_cells_bar0_cfg2), - &dev->resource[0], msix_entries[0].vector); + &dev->resource[0], msix_entries[0].vector, NULL); break; case TIMB_HW_VER3: err = mfd_add_devices(&dev->dev, -1, timberdale_cells_bar0_cfg3, ARRAY_SIZE(timberdale_cells_bar0_cfg3), - &dev->resource[0], msix_entries[0].vector); + &dev->resource[0], msix_entries[0].vector, NULL); break; default: dev_err(&dev->dev, "Uknown IP setup: %d.%d.%d\n", @@ -792,7 +792,7 @@ static int __devinit timb_probe(struct pci_dev *dev, err = mfd_add_devices(&dev->dev, 0, timberdale_cells_bar1, ARRAY_SIZE(timberdale_cells_bar1), - &dev->resource[1], msix_entries[0].vector); + &dev->resource[1], msix_entries[0].vector, NULL); if (err) { dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err); goto err_mfd2; @@ -803,7 +803,7 @@ static int __devinit timb_probe(struct pci_dev *dev, ((priv->fw.config & TIMB_HW_VER_MASK) == TIMB_HW_VER3)) { err = mfd_add_devices(&dev->dev, 1, timberdale_cells_bar2, ARRAY_SIZE(timberdale_cells_bar2), - &dev->resource[2], msix_entries[0].vector); + &dev->resource[2], msix_entries[0].vector, NULL); if (err) { dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err); goto err_mfd2; diff --git a/drivers/mfd/tps6105x.c b/drivers/mfd/tps6105x.c index a293b978e27ce19b116025e3ab4e87be6ae0dd74..14051bdc714b80197f258c14afd9cf629667e765 100644 --- a/drivers/mfd/tps6105x.c +++ b/drivers/mfd/tps6105x.c @@ -188,7 +188,7 @@ static int __devinit tps6105x_probe(struct i2c_client *client, } ret = mfd_add_devices(&client->dev, 0, tps6105x_cells, - ARRAY_SIZE(tps6105x_cells), NULL, 0); + ARRAY_SIZE(tps6105x_cells), NULL, 0, NULL); if (ret) goto fail; diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c index 93d5fdf020c7eaa90dbf4d1eee41de216873d78e..da2691f22e114390f3f40817473f24a12c302f8f 100644 --- a/drivers/mfd/tps65010.c +++ b/drivers/mfd/tps65010.c @@ -563,8 +563,7 @@ static int tps65010_probe(struct i2c_client *client, */ if (client->irq > 0) { status = request_irq(client->irq, tps65010_irq, - IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_FALLING, - DRIVER_NAME, tps); + IRQF_TRIGGER_FALLING, DRIVER_NAME, tps); if (status < 0) { dev_dbg(&client->dev, "can't get IRQ %d, err %d\n", client->irq, status); diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c index 33ba7723c967435b67c49a6f3f78212a63204b4e..1b203499c74402c59c19bf29a8ce6aa7b51a058b 100644 --- a/drivers/mfd/tps6507x.c +++ b/drivers/mfd/tps6507x.c @@ -100,7 +100,7 @@ static int tps6507x_i2c_probe(struct i2c_client *i2c, ret = mfd_add_devices(tps6507x->dev, -1, tps6507x_devs, ARRAY_SIZE(tps6507x_devs), - NULL, 0); + NULL, 0, NULL); if (ret < 0) goto err; diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c index 80e24f4b47bffce67679b7e637627e9e7c769466..50fd87c87a1cca64e21104401c1adbff1b4cf45c 100644 --- a/drivers/mfd/tps65090.c +++ b/drivers/mfd/tps65090.c @@ -292,7 +292,7 @@ static int __devinit tps65090_i2c_probe(struct i2c_client *client, } ret = mfd_add_devices(tps65090->dev, -1, tps65090s, - ARRAY_SIZE(tps65090s), NULL, 0); + ARRAY_SIZE(tps65090s), NULL, 0, NULL); if (ret) { dev_err(&client->dev, "add mfd devices failed with err: %d\n", ret); diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index 61c097a98f5de7eb45fd0ccb8fdc44dd53c869fa..a95e9421b73580df95402f718a4166898a1c41dd 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -24,11 +24,18 @@ #include #include #include -#include +#include +#include #include #include +static struct mfd_cell tps65217s[] = { + { + .name = "tps65217-pmic", + }, +}; + /** * tps65217_reg_read: Read a single tps65217 register. * @@ -133,83 +140,48 @@ int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg, } EXPORT_SYMBOL_GPL(tps65217_clear_bits); -#ifdef CONFIG_OF -static struct of_regulator_match reg_matches[] = { - { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 }, - { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 }, - { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 }, - { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 }, - { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 }, - { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 }, - { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 }, -}; - -static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) -{ - struct device_node *node = client->dev.of_node; - struct tps65217_board *pdata; - struct device_node *regs; - int count = ARRAY_SIZE(reg_matches); - int ret, i; - - regs = of_find_node_by_name(node, "regulators"); - if (!regs) - return NULL; - - ret = of_regulator_match(&client->dev, regs, reg_matches, count); - of_node_put(regs); - if ((ret < 0) || (ret > count)) - return NULL; - - count = ret; - pdata = devm_kzalloc(&client->dev, count * sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return NULL; - - for (i = 0; i < count; i++) { - if (!reg_matches[i].init_data || !reg_matches[i].of_node) - continue; - - pdata->tps65217_init_data[i] = reg_matches[i].init_data; - pdata->of_node[i] = reg_matches[i].of_node; - } - - return pdata; -} - -static struct of_device_id tps65217_of_match[] = { - { .compatible = "ti,tps65217", }, - { }, -}; -#else -static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) -{ - return NULL; -} -#endif - static struct regmap_config tps65217_regmap_config = { .reg_bits = 8, .val_bits = 8, }; +static const struct of_device_id tps65217_of_match[] = { + { .compatible = "ti,tps65217", .data = (void *)TPS65217 }, + { /* sentinel */ }, +}; + static int __devinit tps65217_probe(struct i2c_client *client, const struct i2c_device_id *ids) { struct tps65217 *tps; - struct regulator_init_data *reg_data; - struct tps65217_board *pdata = client->dev.platform_data; - int i, ret; unsigned int version; + unsigned int chip_id = ids->driver_data; + const struct of_device_id *match; + int ret; - if (!pdata && client->dev.of_node) - pdata = tps65217_parse_dt(client); + if (client->dev.of_node) { + match = of_match_device(tps65217_of_match, &client->dev); + if (!match) { + dev_err(&client->dev, + "Failed to find matching dt id\n"); + return -EINVAL; + } + chip_id = (unsigned int)match->data; + } + + if (!chip_id) { + dev_err(&client->dev, "id is null.\n"); + return -ENODEV; + } tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); if (!tps) return -ENOMEM; - tps->pdata = pdata; + i2c_set_clientdata(client, tps); + tps->dev = &client->dev; + tps->id = chip_id; + tps->regmap = devm_regmap_init_i2c(client, &tps65217_regmap_config); if (IS_ERR(tps->regmap)) { ret = PTR_ERR(tps->regmap); @@ -218,8 +190,12 @@ static int __devinit tps65217_probe(struct i2c_client *client, return ret; } - i2c_set_clientdata(client, tps); - tps->dev = &client->dev; + ret = mfd_add_devices(tps->dev, -1, tps65217s, + ARRAY_SIZE(tps65217s), NULL, 0, NULL); + if (ret < 0) { + dev_err(tps->dev, "mfd_add_devices failed: %d\n", ret); + return ret; + } ret = tps65217_reg_read(tps, TPS65217_REG_CHIPID, &version); if (ret < 0) { @@ -232,41 +208,21 @@ static int __devinit tps65217_probe(struct i2c_client *client, (version & TPS65217_CHIPID_CHIP_MASK) >> 4, version & TPS65217_CHIPID_REV_MASK); - for (i = 0; i < TPS65217_NUM_REGULATOR; i++) { - struct platform_device *pdev; - - pdev = platform_device_alloc("tps65217-pmic", i); - if (!pdev) { - dev_err(tps->dev, "Cannot create regulator %d\n", i); - continue; - } - - pdev->dev.parent = tps->dev; - pdev->dev.of_node = pdata->of_node[i]; - reg_data = pdata->tps65217_init_data[i]; - platform_device_add_data(pdev, reg_data, sizeof(*reg_data)); - tps->regulator_pdev[i] = pdev; - - platform_device_add(pdev); - } - return 0; } static int __devexit tps65217_remove(struct i2c_client *client) { struct tps65217 *tps = i2c_get_clientdata(client); - int i; - for (i = 0; i < TPS65217_NUM_REGULATOR; i++) - platform_device_unregister(tps->regulator_pdev[i]); + mfd_remove_devices(tps->dev); return 0; } static const struct i2c_device_id tps65217_id_table[] = { - {"tps65217", 0xF0}, - {/* end of list */} + {"tps65217", TPS65217}, + { /* sentinel */ } }; MODULE_DEVICE_TABLE(i2c, tps65217_id_table); diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index 353c34812120fc46e37140c0b6a04babdd5cb080..5f58370ccf5502b1d6a729f2daa0db411a6e3e1d 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -493,7 +493,8 @@ static int __devinit tps6586x_i2c_probe(struct i2c_client *client, } ret = mfd_add_devices(tps6586x->dev, -1, - tps6586x_cell, ARRAY_SIZE(tps6586x_cell), NULL, 0); + tps6586x_cell, ARRAY_SIZE(tps6586x_cell), + NULL, 0, NULL); if (ret < 0) { dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret); goto err_mfd_add; diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 1c563792c777ba8f04c194a2a99c39159d8871f7..d3ce4d569deb57c2b707dc73d6cb7cf600962cab 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -254,7 +254,7 @@ static __devinit int tps65910_i2c_probe(struct i2c_client *i2c, ret = mfd_add_devices(tps65910->dev, -1, tps65910s, ARRAY_SIZE(tps65910s), - NULL, 0); + NULL, 0, NULL); if (ret < 0) { dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret); return ret; diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c index 74fd8cb5f37224e576f58398c20fda9f4884d9e7..4658b5bdcd84488d3379a2ef4f33e334eb96ea2f 100644 --- a/drivers/mfd/tps65912-core.c +++ b/drivers/mfd/tps65912-core.c @@ -146,7 +146,7 @@ int tps65912_device_init(struct tps65912 *tps65912) ret = mfd_add_devices(tps65912->dev, -1, tps65912s, ARRAY_SIZE(tps65912s), - NULL, 0); + NULL, 0, NULL); if (ret < 0) goto err; diff --git a/drivers/mfd/twl4030-audio.c b/drivers/mfd/twl4030-audio.c index 838ce4eb444e24ce44bd3b120fe21a9f977d6e75..77c9acb145831c5b03fd04cbc08d0f6e0bfd47ec 100644 --- a/drivers/mfd/twl4030-audio.c +++ b/drivers/mfd/twl4030-audio.c @@ -223,7 +223,7 @@ static int __devinit twl4030_audio_probe(struct platform_device *pdev) if (childs) ret = mfd_add_devices(&pdev->dev, pdev->id, audio->cells, - childs, NULL, 0); + childs, NULL, 0, NULL); else { dev_err(&pdev->dev, "No platform data found for childs\n"); ret = -ENODEV; diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index b0fad0ffca560b0714a9574b42d4c87c89ea3e4d..3dca5c195a200505c3796c488b34b65f8a32b7e6 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -632,7 +632,7 @@ static int __devinit twl6040_probe(struct i2c_client *client, } ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children, - NULL, 0); + NULL, 0, NULL); if (ret) goto mfd_err; diff --git a/drivers/mfd/vx855.c b/drivers/mfd/vx855.c index 872aff21e4be6fa682eb01aad72b04492efd622e..b9a636d44c7f95979adcd17172e9d7803fa5d5fe 100644 --- a/drivers/mfd/vx855.c +++ b/drivers/mfd/vx855.c @@ -102,7 +102,7 @@ static __devinit int vx855_probe(struct pci_dev *pdev, vx855_gpio_resources[1].end = vx855_gpio_resources[1].start + 3; ret = mfd_add_devices(&pdev->dev, -1, vx855_cells, ARRAY_SIZE(vx855_cells), - NULL, 0); + NULL, 0, NULL); /* we always return -ENODEV here in order to enable other * drivers like old, not-yet-platform_device ported i2c-viapro */ diff --git a/drivers/mfd/wl1273-core.c b/drivers/mfd/wl1273-core.c index f39b756df561dcfd5fee7fa310222bb27748d708..86e0e4309fc274e41ec73a20dc1fb675e06fb0fc 100644 --- a/drivers/mfd/wl1273-core.c +++ b/drivers/mfd/wl1273-core.c @@ -241,7 +241,7 @@ static int __devinit wl1273_core_probe(struct i2c_client *client, __func__, children); r = mfd_add_devices(&client->dev, -1, core->cells, - children, NULL, 0); + children, NULL, 0, NULL); if (r) goto err; diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 946698fd2dc6a4dc9b3a7868bc7f44c920a46201..3017310359403248719495fe39692698271ba7ed 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -1813,27 +1813,27 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) case WM8310: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8310_devs, ARRAY_SIZE(wm8310_devs), - NULL, 0); + NULL, 0, NULL); break; case WM8311: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8311_devs, ARRAY_SIZE(wm8311_devs), - NULL, 0); + NULL, 0, NULL); if (!pdata || !pdata->disable_touch) mfd_add_devices(wm831x->dev, wm831x_num, touch_devs, ARRAY_SIZE(touch_devs), - NULL, 0); + NULL, 0, NULL); break; case WM8312: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8312_devs, ARRAY_SIZE(wm8312_devs), - NULL, 0); + NULL, 0, NULL); if (!pdata || !pdata->disable_touch) mfd_add_devices(wm831x->dev, wm831x_num, touch_devs, ARRAY_SIZE(touch_devs), - NULL, 0); + NULL, 0, NULL); break; case WM8320: @@ -1842,7 +1842,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) case WM8326: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8320_devs, ARRAY_SIZE(wm8320_devs), - NULL, 0); + NULL, 0, NULL); break; default: @@ -1867,7 +1867,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) if (ret & WM831X_XTAL_ENA) { ret = mfd_add_devices(wm831x->dev, wm831x_num, rtc_devs, ARRAY_SIZE(rtc_devs), - NULL, 0); + NULL, 0, NULL); if (ret != 0) { dev_err(wm831x->dev, "Failed to add RTC: %d\n", ret); goto err_irq; @@ -1880,7 +1880,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) /* Treat errors as non-critical */ ret = mfd_add_devices(wm831x->dev, wm831x_num, backlight_devs, ARRAY_SIZE(backlight_devs), NULL, - 0); + 0, NULL); if (ret < 0) dev_err(wm831x->dev, "Failed to add backlight: %d\n", ret); diff --git a/drivers/mfd/wm831x-otp.c b/drivers/mfd/wm831x-otp.c index f742745ff354ec2bc485d533805f02340a11d2fd..b90f3e06b6c957f6a73aa87e0eb9bbec2f38fa58 100644 --- a/drivers/mfd/wm831x-otp.c +++ b/drivers/mfd/wm831x-otp.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -66,6 +67,7 @@ static DEVICE_ATTR(unique_id, 0444, wm831x_unique_id_show, NULL); int wm831x_otp_init(struct wm831x *wm831x) { + char uuid[WM831X_UNIQUE_ID_LEN]; int ret; ret = device_create_file(wm831x->dev, &dev_attr_unique_id); @@ -73,6 +75,12 @@ int wm831x_otp_init(struct wm831x *wm831x) dev_err(wm831x->dev, "Unique ID attribute not created: %d\n", ret); + ret = wm831x_unique_id_read(wm831x, uuid); + if (ret == 0) + add_device_randomness(uuid, sizeof(uuid)); + else + dev_err(wm831x->dev, "Failed to read UUID: %d\n", ret); + return ret; } diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c index 4b7d378551d58daf515532dbcaea2c6f35c17f1e..639ca359242f849cebfe407333e6107c0bca4bbb 100644 --- a/drivers/mfd/wm8400-core.c +++ b/drivers/mfd/wm8400-core.c @@ -70,7 +70,7 @@ static int wm8400_register_codec(struct wm8400 *wm8400) .pdata_size = sizeof(*wm8400), }; - return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0); + return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0, NULL); } /* diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index eec74aa55fdfe28c46476c3360e1632bfd51cf7f..2febf88cfce8847383be5a4fe8ab80ae89fe48e2 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -414,7 +414,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq) ret = mfd_add_devices(wm8994->dev, -1, wm8994_regulator_devs, ARRAY_SIZE(wm8994_regulator_devs), - NULL, 0); + NULL, 0, NULL); if (ret != 0) { dev_err(wm8994->dev, "Failed to add children: %d\n", ret); goto err; @@ -648,7 +648,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq) ret = mfd_add_devices(wm8994->dev, -1, wm8994_devs, ARRAY_SIZE(wm8994_devs), - NULL, 0); + NULL, 0, NULL); if (ret != 0) { dev_err(wm8994->dev, "Failed to add children: %d\n", ret); goto err_irq; diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index c6ffbbe5a6c014b11ee05855795c1c941d0f0abe..d78c05e693f7d45c8cf8ca0971ef2184a73c0597 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -1253,7 +1253,7 @@ static int mei_irq_thread_write_handler(struct mei_io_list *cmpl_list, if (dev->wd_timeout) *slots -= mei_data2slots(MEI_START_WD_DATA_SIZE); else - *slots -= mei_data2slots(MEI_START_WD_DATA_SIZE); + *slots -= mei_data2slots(MEI_WD_PARAMS_SIZE); } } if (dev->stop) diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 092330208869640a1e474abfd781bce41a5c6043..7422c76528458134f450eb496d52b1a297e18f8a 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -924,6 +924,27 @@ static struct miscdevice mei_misc_device = { .minor = MISC_DYNAMIC_MINOR, }; +/** + * mei_quirk_probe - probe for devices that doesn't valid ME interface + * @pdev: PCI device structure + * @ent: entry into pci_device_table + * + * returns true if ME Interface is valid, false otherwise + */ +static bool __devinit mei_quirk_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + u32 reg; + if (ent->device == MEI_DEV_ID_PBG_1) { + pci_read_config_dword(pdev, 0x48, ®); + /* make sure that bit 9 is up and bit 10 is down */ + if ((reg & 0x600) == 0x200) { + dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n"); + return false; + } + } + return true; +} /** * mei_probe - Device Initialization Routine * @@ -939,6 +960,12 @@ static int __devinit mei_probe(struct pci_dev *pdev, int err; mutex_lock(&mei_mutex); + + if (!mei_quirk_probe(pdev, ent)) { + err = -ENODEV; + goto end; + } + if (mei_device) { err = -EEXIST; goto end; diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 87b251ab6ec582f2c8177687d0b330d97110fb50..b9e2000969f025894be4bcae2c6950d699ded3a9 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include #include #include #include @@ -59,6 +61,8 @@ static struct xpc_heartbeat_uv *xpc_heartbeat_uv; XPC_NOTIFY_MSG_SIZE_UV) #define XPC_NOTIFY_IRQ_NAME "xpc_notify" +static int xpc_mq_node = -1; + static struct xpc_gru_mq_uv *xpc_activate_mq_uv; static struct xpc_gru_mq_uv *xpc_notify_mq_uv; @@ -109,11 +113,8 @@ xpc_get_gru_mq_irq_uv(struct xpc_gru_mq_uv *mq, int cpu, char *irq_name) #if defined CONFIG_X86_64 mq->irq = uv_setup_irq(irq_name, cpu, mq->mmr_blade, mq->mmr_offset, UV_AFFINITY_CPU); - if (mq->irq < 0) { - dev_err(xpc_part, "uv_setup_irq() returned error=%d\n", - -mq->irq); + if (mq->irq < 0) return mq->irq; - } mq->mmr_value = uv_read_global_mmr64(mmr_pnode, mq->mmr_offset); @@ -238,8 +239,9 @@ xpc_create_gru_mq_uv(unsigned int mq_size, int cpu, char *irq_name, mq->mmr_blade = uv_cpu_to_blade_id(cpu); nid = cpu_to_node(cpu); - page = alloc_pages_exact_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, - pg_order); + page = alloc_pages_exact_node(nid, + GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, + pg_order); if (page == NULL) { dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d " "bytes of memory on nid=%d for GRU mq\n", mq_size, nid); @@ -1731,9 +1733,50 @@ static struct xpc_arch_operations xpc_arch_ops_uv = { .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv, }; +static int +xpc_init_mq_node(int nid) +{ + int cpu; + + get_online_cpus(); + + for_each_cpu(cpu, cpumask_of_node(nid)) { + xpc_activate_mq_uv = + xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, nid, + XPC_ACTIVATE_IRQ_NAME, + xpc_handle_activate_IRQ_uv); + if (!IS_ERR(xpc_activate_mq_uv)) + break; + } + if (IS_ERR(xpc_activate_mq_uv)) { + put_online_cpus(); + return PTR_ERR(xpc_activate_mq_uv); + } + + for_each_cpu(cpu, cpumask_of_node(nid)) { + xpc_notify_mq_uv = + xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, nid, + XPC_NOTIFY_IRQ_NAME, + xpc_handle_notify_IRQ_uv); + if (!IS_ERR(xpc_notify_mq_uv)) + break; + } + if (IS_ERR(xpc_notify_mq_uv)) { + xpc_destroy_gru_mq_uv(xpc_activate_mq_uv); + put_online_cpus(); + return PTR_ERR(xpc_notify_mq_uv); + } + + put_online_cpus(); + return 0; +} + int xpc_init_uv(void) { + int nid; + int ret = 0; + xpc_arch_ops = xpc_arch_ops_uv; if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) { @@ -1742,21 +1785,21 @@ xpc_init_uv(void) return -E2BIG; } - xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0, - XPC_ACTIVATE_IRQ_NAME, - xpc_handle_activate_IRQ_uv); - if (IS_ERR(xpc_activate_mq_uv)) - return PTR_ERR(xpc_activate_mq_uv); + if (xpc_mq_node < 0) + for_each_online_node(nid) { + ret = xpc_init_mq_node(nid); - xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0, - XPC_NOTIFY_IRQ_NAME, - xpc_handle_notify_IRQ_uv); - if (IS_ERR(xpc_notify_mq_uv)) { - xpc_destroy_gru_mq_uv(xpc_activate_mq_uv); - return PTR_ERR(xpc_notify_mq_uv); - } + if (!ret) + break; + } + else + ret = xpc_init_mq_node(xpc_mq_node); - return 0; + if (ret < 0) + dev_err(xpc_part, "xpc_init_mq_node() returned error=%d\n", + -ret); + + return ret; } void @@ -1765,3 +1808,6 @@ xpc_exit_uv(void) xpc_destroy_gru_mq_uv(xpc_notify_mq_uv); xpc_destroy_gru_mq_uv(xpc_activate_mq_uv); } + +module_param(xpc_mq_node, int, 0); +MODULE_PARM_DESC(xpc_mq_node, "Node number on which to allocate message queues."); diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c index 1ff460a8e9c74f67e584d634016fa25332fd351c..93b4d67cc4a3a6bc30197acf709d4f73faaad070 100644 --- a/drivers/misc/ti-st/st_ll.c +++ b/drivers/misc/ti-st/st_ll.c @@ -87,7 +87,7 @@ static void ll_device_want_to_wakeup(struct st_data_s *st_data) /* communicate to platform about chip wakeup */ kim_data = st_data->kim_data; pdata = kim_data->kim_pdev->dev.platform_data; - if (pdata->chip_asleep) + if (pdata->chip_awake) pdata->chip_awake(NULL); } diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index f1c84decb192638e02aa13488e58c855d7335704..172a768036d87d700c018d36cdfdf9dc7093ae4d 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1411,7 +1411,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) /* complete ongoing async transfer before issuing discard */ if (card->host->areq) mmc_blk_issue_rw_rq(mq, NULL); - if (req->cmd_flags & REQ_SECURE) + if (req->cmd_flags & REQ_SECURE && + !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN)) ret = mmc_blk_issue_secdiscard_rq(mq, req); else ret = mmc_blk_issue_discard_rq(mq, req); @@ -1716,6 +1717,7 @@ static int mmc_add_disk(struct mmc_blk_data *md) #define CID_MANFID_SANDISK 0x2 #define CID_MANFID_TOSHIBA 0x11 #define CID_MANFID_MICRON 0x13 +#define CID_MANFID_SAMSUNG 0x15 static const struct mmc_fixup blk_fixups[] = { @@ -1752,6 +1754,28 @@ static const struct mmc_fixup blk_fixups[] = MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc, MMC_QUIRK_LONG_READ_TIME), + /* + * On these Samsung MoviNAND parts, performing secure erase or + * secure trim can result in unrecoverable corruption due to a + * firmware bug. + */ + MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + END_FIXUP }; diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 322412cec4eeb8ca6970d2d12f37c7c83bbba42e..a53c7c478e054c8c47df5a5a219a2b1ed1e6836b 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -81,6 +81,7 @@ struct atmel_mci_caps { bool has_bad_data_ordering; bool need_reset_after_xfer; bool need_blksz_mul_4; + bool need_notbusy_for_read_ops; }; struct atmel_mci_dma { @@ -1625,7 +1626,8 @@ static void atmci_tasklet_func(unsigned long priv) __func__); atmci_set_completed(host, EVENT_XFER_COMPLETE); - if (host->data->flags & MMC_DATA_WRITE) { + if (host->caps.need_notbusy_for_read_ops || + (host->data->flags & MMC_DATA_WRITE)) { atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); state = STATE_WAITING_NOTBUSY; } else if (host->mrq->stop) { @@ -2218,6 +2220,7 @@ static void __init atmci_get_cap(struct atmel_mci *host) host->caps.has_bad_data_ordering = 1; host->caps.need_reset_after_xfer = 1; host->caps.need_blksz_mul_4 = 1; + host->caps.need_notbusy_for_read_ops = 0; /* keep only major version number */ switch (version & 0xf00) { @@ -2238,6 +2241,7 @@ static void __init atmci_get_cap(struct atmel_mci *host) case 0x200: host->caps.has_rwproof = 1; host->caps.need_blksz_mul_4 = 0; + host->caps.need_notbusy_for_read_ops = 1; case 0x100: host->caps.has_bad_data_ordering = 0; host->caps.need_reset_after_xfer = 0; diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c index 03666174ca483e61a351626ad428a9bc833ef981..a17dd7363cebedc69c41d28b47b6c4fd895a327a 100644 --- a/drivers/mmc/host/bfin_sdh.c +++ b/drivers/mmc/host/bfin_sdh.c @@ -49,13 +49,6 @@ #define bfin_write_SDH_CFG bfin_write_RSI_CFG #endif -struct dma_desc_array { - unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; -} __packed; - struct sdh_host { struct mmc_host *mmc; spinlock_t lock; diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 72dc3cde646d063513f3a55fc8ba0ec74197261b..af40d227bece22ecb51bb0862df913aadc3ce6da 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -627,6 +627,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot) { struct dw_mci *host = slot->host; u32 div; + u32 clk_en_a; if (slot->clock != host->current_speed) { div = host->bus_hz / slot->clock; @@ -659,9 +660,11 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot) mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); - /* enable clock */ - mci_writel(host, CLKENA, ((SDMMC_CLKEN_ENABLE | - SDMMC_CLKEN_LOW_PWR) << slot->id)); + /* enable clock; only low power if no SDIO */ + clk_en_a = SDMMC_CLKEN_ENABLE << slot->id; + if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id))) + clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id; + mci_writel(host, CLKENA, clk_en_a); /* inform CIU */ mci_send_cmd(slot, @@ -862,6 +865,30 @@ static int dw_mci_get_cd(struct mmc_host *mmc) return present; } +/* + * Disable lower power mode. + * + * Low power mode will stop the card clock when idle. According to the + * description of the CLKENA register we should disable low power mode + * for SDIO cards if we need SDIO interrupts to work. + * + * This function is fast if low power mode is already disabled. + */ +static void dw_mci_disable_low_power(struct dw_mci_slot *slot) +{ + struct dw_mci *host = slot->host; + u32 clk_en_a; + const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id; + + clk_en_a = mci_readl(host, CLKENA); + + if (clk_en_a & clken_low_pwr) { + mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr); + mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | + SDMMC_CMD_PRV_DAT_WAIT, 0); + } +} + static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) { struct dw_mci_slot *slot = mmc_priv(mmc); @@ -871,6 +898,14 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) /* Enable/disable Slot Specific SDIO interrupt */ int_mask = mci_readl(host, INTMASK); if (enb) { + /* + * Turn off low power mode if it was enabled. This is a bit of + * a heavy operation and we disable / enable IRQs a lot, so + * we'll leave low power mode disabled and it will get + * re-enabled again in dw_mci_setup_bus(). + */ + dw_mci_disable_low_power(slot); + mci_writel(host, INTMASK, (int_mask | SDMMC_INT_SDIO(slot->id))); } else { @@ -1429,22 +1464,10 @@ static void dw_mci_read_data_pio(struct dw_mci *host) nbytes += len; remain -= len; } while (remain); - sg_miter->consumed = offset; + sg_miter->consumed = offset; status = mci_readl(host, MINTSTS); mci_writel(host, RINTSTS, SDMMC_INT_RXDR); - if (status & DW_MCI_DATA_ERROR_FLAGS) { - host->data_status = status; - data->bytes_xfered += nbytes; - sg_miter_stop(sg_miter); - host->sg = NULL; - smp_wmb(); - - set_bit(EVENT_DATA_ERROR, &host->pending_events); - - tasklet_schedule(&host->tasklet); - return; - } } while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/ data->bytes_xfered += nbytes; @@ -1497,23 +1520,10 @@ static void dw_mci_write_data_pio(struct dw_mci *host) nbytes += len; remain -= len; } while (remain); - sg_miter->consumed = offset; + sg_miter->consumed = offset; status = mci_readl(host, MINTSTS); mci_writel(host, RINTSTS, SDMMC_INT_TXDR); - if (status & DW_MCI_DATA_ERROR_FLAGS) { - host->data_status = status; - data->bytes_xfered += nbytes; - sg_miter_stop(sg_miter); - host->sg = NULL; - - smp_wmb(); - - set_bit(EVENT_DATA_ERROR, &host->pending_events); - - tasklet_schedule(&host->tasklet); - return; - } } while (status & SDMMC_INT_TXDR); /* if TXDR write again */ data->bytes_xfered += nbytes; @@ -1547,12 +1557,11 @@ static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status) static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) { struct dw_mci *host = dev_id; - u32 status, pending; + u32 pending; unsigned int pass_count = 0; int i; do { - status = mci_readl(host, RINTSTS); pending = mci_readl(host, MINTSTS); /* read-only mask reg */ /* @@ -1570,7 +1579,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & DW_MCI_CMD_ERROR_FLAGS) { mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS); - host->cmd_status = status; + host->cmd_status = pending; smp_wmb(); set_bit(EVENT_CMD_COMPLETE, &host->pending_events); } @@ -1578,18 +1587,16 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & DW_MCI_DATA_ERROR_FLAGS) { /* if there is an error report DATA_ERROR */ mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS); - host->data_status = status; + host->data_status = pending; smp_wmb(); set_bit(EVENT_DATA_ERROR, &host->pending_events); - if (!(pending & (SDMMC_INT_DTO | SDMMC_INT_DCRC | - SDMMC_INT_SBE | SDMMC_INT_EBE))) - tasklet_schedule(&host->tasklet); + tasklet_schedule(&host->tasklet); } if (pending & SDMMC_INT_DATA_OVER) { mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER); if (!host->data_status) - host->data_status = status; + host->data_status = pending; smp_wmb(); if (host->dir_status == DW_MCI_RECV_STATUS) { if (host->sg != NULL) @@ -1613,7 +1620,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & SDMMC_INT_CMD_DONE) { mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE); - dw_mci_cmd_interrupt(host, status); + dw_mci_cmd_interrupt(host, pending); } if (pending & SDMMC_INT_CD) { diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index a51f9309ffbb1e49947939fb60d6c6dcc8e3be93..ad3fcea1269ebc179105563333b01cfdf139a9ed 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -285,11 +285,11 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id) writel(stat & MXS_MMC_IRQ_BITS, host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR); + spin_unlock(&host->lock); + if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN)) mmc_signal_sdio_irq(host->mmc); - spin_unlock(&host->lock); - if (stat & BM_SSP_CTRL1_RESP_TIMEOUT_IRQ) cmd->error = -ETIMEDOUT; else if (stat & BM_SSP_CTRL1_RESP_ERR_IRQ) @@ -644,11 +644,6 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); writel(BM_SSP_CTRL1_SDIO_IRQ_EN, host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET); - - if (readl(host->base + HW_SSP_STATUS(host)) & - BM_SSP_STATUS_SDIO_IRQ) - mmc_signal_sdio_irq(host->mmc); - } else { writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK, host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR); @@ -657,6 +652,11 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) } spin_unlock_irqrestore(&host->lock, flags); + + if (enable && readl(host->base + HW_SSP_STATUS(host)) & + BM_SSP_STATUS_SDIO_IRQ) + mmc_signal_sdio_irq(host->mmc); + } static const struct mmc_host_ops mxs_mmc_ops = { diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 3e8dcf8d2e051efea306e933fa701d7f92d53333..a5999a74496af218c540959ee757b7c1ad3f1365 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -17,10 +17,12 @@ #include #include #include +#include #include #include #include #include +#include #include #include #include @@ -128,6 +130,10 @@ struct mmc_omap_host { unsigned char id; /* 16xx chips have 2 MMC blocks */ struct clk * iclk; struct clk * fclk; + struct dma_chan *dma_rx; + u32 dma_rx_burst; + struct dma_chan *dma_tx; + u32 dma_tx_burst; struct resource *mem_res; void __iomem *virt_base; unsigned int phys_base; @@ -153,12 +159,8 @@ struct mmc_omap_host { unsigned use_dma:1; unsigned brs_received:1, dma_done:1; - unsigned dma_is_read:1; unsigned dma_in_use:1; - int dma_ch; spinlock_t dma_lock; - struct timer_list dma_timer; - unsigned dma_len; struct mmc_omap_slot *slots[OMAP_MMC_MAX_SLOTS]; struct mmc_omap_slot *current_slot; @@ -406,18 +408,25 @@ mmc_omap_release_dma(struct mmc_omap_host *host, struct mmc_data *data, int abort) { enum dma_data_direction dma_data_dir; + struct device *dev = mmc_dev(host->mmc); + struct dma_chan *c; - BUG_ON(host->dma_ch < 0); - if (data->error) - omap_stop_dma(host->dma_ch); - /* Release DMA channel lazily */ - mod_timer(&host->dma_timer, jiffies + HZ); - if (data->flags & MMC_DATA_WRITE) + if (data->flags & MMC_DATA_WRITE) { dma_data_dir = DMA_TO_DEVICE; - else + c = host->dma_tx; + } else { dma_data_dir = DMA_FROM_DEVICE; - dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len, - dma_data_dir); + c = host->dma_rx; + } + if (c) { + if (data->error) { + dmaengine_terminate_all(c); + /* Claim nothing transferred on error... */ + data->bytes_xfered = 0; + } + dev = c->device->dev; + } + dma_unmap_sg(dev, data->sg, host->sg_len, dma_data_dir); } static void mmc_omap_send_stop_work(struct work_struct *work) @@ -524,16 +533,6 @@ mmc_omap_end_of_data(struct mmc_omap_host *host, struct mmc_data *data) mmc_omap_xfer_done(host, data); } -static void -mmc_omap_dma_timer(unsigned long data) -{ - struct mmc_omap_host *host = (struct mmc_omap_host *) data; - - BUG_ON(host->dma_ch < 0); - omap_free_dma(host->dma_ch); - host->dma_ch = -1; -} - static void mmc_omap_dma_done(struct mmc_omap_host *host, struct mmc_data *data) { @@ -669,7 +668,7 @@ mmc_omap_clk_timer(unsigned long data) static void mmc_omap_xfer_data(struct mmc_omap_host *host, int write) { - int n; + int n, nwords; if (host->buffer_bytes_left == 0) { host->sg_idx++; @@ -679,15 +678,23 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write) n = 64; if (n > host->buffer_bytes_left) n = host->buffer_bytes_left; + + nwords = n / 2; + nwords += n & 1; /* handle odd number of bytes to transfer */ + host->buffer_bytes_left -= n; host->total_bytes_left -= n; host->data->bytes_xfered += n; if (write) { - __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n); + __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), + host->buffer, nwords); } else { - __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n); + __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), + host->buffer, nwords); } + + host->buffer += nwords; } static inline void mmc_omap_report_irq(u16 status) @@ -891,159 +898,15 @@ static void mmc_omap_cover_handler(unsigned long param) jiffies + msecs_to_jiffies(OMAP_MMC_COVER_POLL_DELAY)); } -/* Prepare to transfer the next segment of a scatterlist */ -static void -mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data) -{ - int dma_ch = host->dma_ch; - unsigned long data_addr; - u16 buf, frame; - u32 count; - struct scatterlist *sg = &data->sg[host->sg_idx]; - int src_port = 0; - int dst_port = 0; - int sync_dev = 0; - - data_addr = host->phys_base + OMAP_MMC_REG(host, DATA); - frame = data->blksz; - count = sg_dma_len(sg); - - if ((data->blocks == 1) && (count > data->blksz)) - count = frame; - - host->dma_len = count; - - /* FIFO is 16x2 bytes on 15xx, and 32x2 bytes on 16xx and 24xx. - * Use 16 or 32 word frames when the blocksize is at least that large. - * Blocksize is usually 512 bytes; but not for some SD reads. - */ - if (cpu_is_omap15xx() && frame > 32) - frame = 32; - else if (frame > 64) - frame = 64; - count /= frame; - frame >>= 1; - - if (!(data->flags & MMC_DATA_WRITE)) { - buf = 0x800f | ((frame - 1) << 8); - - if (cpu_class_is_omap1()) { - src_port = OMAP_DMA_PORT_TIPB; - dst_port = OMAP_DMA_PORT_EMIFF; - } - if (cpu_is_omap24xx()) - sync_dev = OMAP24XX_DMA_MMC1_RX; - - omap_set_dma_src_params(dma_ch, src_port, - OMAP_DMA_AMODE_CONSTANT, - data_addr, 0, 0); - omap_set_dma_dest_params(dma_ch, dst_port, - OMAP_DMA_AMODE_POST_INC, - sg_dma_address(sg), 0, 0); - omap_set_dma_dest_data_pack(dma_ch, 1); - omap_set_dma_dest_burst_mode(dma_ch, OMAP_DMA_DATA_BURST_4); - } else { - buf = 0x0f80 | ((frame - 1) << 0); - - if (cpu_class_is_omap1()) { - src_port = OMAP_DMA_PORT_EMIFF; - dst_port = OMAP_DMA_PORT_TIPB; - } - if (cpu_is_omap24xx()) - sync_dev = OMAP24XX_DMA_MMC1_TX; - - omap_set_dma_dest_params(dma_ch, dst_port, - OMAP_DMA_AMODE_CONSTANT, - data_addr, 0, 0); - omap_set_dma_src_params(dma_ch, src_port, - OMAP_DMA_AMODE_POST_INC, - sg_dma_address(sg), 0, 0); - omap_set_dma_src_data_pack(dma_ch, 1); - omap_set_dma_src_burst_mode(dma_ch, OMAP_DMA_DATA_BURST_4); - } - - /* Max limit for DMA frame count is 0xffff */ - BUG_ON(count > 0xffff); - - OMAP_MMC_WRITE(host, BUF, buf); - omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S16, - frame, count, OMAP_DMA_SYNC_FRAME, - sync_dev, 0); -} - -/* A scatterlist segment completed */ -static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data) +static void mmc_omap_dma_callback(void *priv) { - struct mmc_omap_host *host = (struct mmc_omap_host *) data; - struct mmc_data *mmcdat = host->data; + struct mmc_omap_host *host = priv; + struct mmc_data *data = host->data; - if (unlikely(host->dma_ch < 0)) { - dev_err(mmc_dev(host->mmc), - "DMA callback while DMA not enabled\n"); - return; - } - /* FIXME: We really should do something to _handle_ the errors */ - if (ch_status & OMAP1_DMA_TOUT_IRQ) { - dev_err(mmc_dev(host->mmc),"DMA timeout\n"); - return; - } - if (ch_status & OMAP_DMA_DROP_IRQ) { - dev_err(mmc_dev(host->mmc), "DMA sync error\n"); - return; - } - if (!(ch_status & OMAP_DMA_BLOCK_IRQ)) { - return; - } - mmcdat->bytes_xfered += host->dma_len; - host->sg_idx++; - if (host->sg_idx < host->sg_len) { - mmc_omap_prepare_dma(host, host->data); - omap_start_dma(host->dma_ch); - } else - mmc_omap_dma_done(host, host->data); -} - -static int mmc_omap_get_dma_channel(struct mmc_omap_host *host, struct mmc_data *data) -{ - const char *dma_dev_name; - int sync_dev, dma_ch, is_read, r; - - is_read = !(data->flags & MMC_DATA_WRITE); - del_timer_sync(&host->dma_timer); - if (host->dma_ch >= 0) { - if (is_read == host->dma_is_read) - return 0; - omap_free_dma(host->dma_ch); - host->dma_ch = -1; - } - - if (is_read) { - if (host->id == 0) { - sync_dev = OMAP_DMA_MMC_RX; - dma_dev_name = "MMC1 read"; - } else { - sync_dev = OMAP_DMA_MMC2_RX; - dma_dev_name = "MMC2 read"; - } - } else { - if (host->id == 0) { - sync_dev = OMAP_DMA_MMC_TX; - dma_dev_name = "MMC1 write"; - } else { - sync_dev = OMAP_DMA_MMC2_TX; - dma_dev_name = "MMC2 write"; - } - } - r = omap_request_dma(sync_dev, dma_dev_name, mmc_omap_dma_cb, - host, &dma_ch); - if (r != 0) { - dev_dbg(mmc_dev(host->mmc), "omap_request_dma() failed with %d\n", r); - return r; - } - host->dma_ch = dma_ch; - host->dma_is_read = is_read; + /* If we got to the end of DMA, assume everything went well */ + data->bytes_xfered += data->blocks * data->blksz; - return 0; + mmc_omap_dma_done(host, data); } static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_request *req) @@ -1118,33 +981,85 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) host->sg_idx = 0; if (use_dma) { - if (mmc_omap_get_dma_channel(host, data) == 0) { - enum dma_data_direction dma_data_dir; - - if (data->flags & MMC_DATA_WRITE) - dma_data_dir = DMA_TO_DEVICE; - else - dma_data_dir = DMA_FROM_DEVICE; - - host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, - sg_len, dma_data_dir); - host->total_bytes_left = 0; - mmc_omap_prepare_dma(host, req->data); - host->brs_received = 0; - host->dma_done = 0; - host->dma_in_use = 1; - } else - use_dma = 0; + enum dma_data_direction dma_data_dir; + struct dma_async_tx_descriptor *tx; + struct dma_chan *c; + u32 burst, *bp; + u16 buf; + + /* + * FIFO is 16x2 bytes on 15xx, and 32x2 bytes on 16xx + * and 24xx. Use 16 or 32 word frames when the + * blocksize is at least that large. Blocksize is + * usually 512 bytes; but not for some SD reads. + */ + burst = cpu_is_omap15xx() ? 32 : 64; + if (burst > data->blksz) + burst = data->blksz; + + burst >>= 1; + + if (data->flags & MMC_DATA_WRITE) { + c = host->dma_tx; + bp = &host->dma_tx_burst; + buf = 0x0f80 | (burst - 1) << 0; + dma_data_dir = DMA_TO_DEVICE; + } else { + c = host->dma_rx; + bp = &host->dma_rx_burst; + buf = 0x800f | (burst - 1) << 8; + dma_data_dir = DMA_FROM_DEVICE; + } + + if (!c) + goto use_pio; + + /* Only reconfigure if we have a different burst size */ + if (*bp != burst) { + struct dma_slave_config cfg; + + cfg.src_addr = host->phys_base + OMAP_MMC_REG(host, DATA); + cfg.dst_addr = host->phys_base + OMAP_MMC_REG(host, DATA); + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + cfg.src_maxburst = burst; + cfg.dst_maxburst = burst; + + if (dmaengine_slave_config(c, &cfg)) + goto use_pio; + + *bp = burst; + } + + host->sg_len = dma_map_sg(c->device->dev, data->sg, sg_len, + dma_data_dir); + if (host->sg_len == 0) + goto use_pio; + + tx = dmaengine_prep_slave_sg(c, data->sg, host->sg_len, + data->flags & MMC_DATA_WRITE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!tx) + goto use_pio; + + OMAP_MMC_WRITE(host, BUF, buf); + + tx->callback = mmc_omap_dma_callback; + tx->callback_param = host; + dmaengine_submit(tx); + host->brs_received = 0; + host->dma_done = 0; + host->dma_in_use = 1; + return; } + use_pio: /* Revert to PIO? */ - if (!use_dma) { - OMAP_MMC_WRITE(host, BUF, 0x1f1f); - host->total_bytes_left = data->blocks * block_size; - host->sg_len = sg_len; - mmc_omap_sg_to_buf(host); - host->dma_in_use = 0; - } + OMAP_MMC_WRITE(host, BUF, 0x1f1f); + host->total_bytes_left = data->blocks * block_size; + host->sg_len = sg_len; + mmc_omap_sg_to_buf(host); + host->dma_in_use = 0; } static void mmc_omap_start_request(struct mmc_omap_host *host, @@ -1157,8 +1072,12 @@ static void mmc_omap_start_request(struct mmc_omap_host *host, /* only touch fifo AFTER the controller readies it */ mmc_omap_prepare_data(host, req); mmc_omap_start_command(host, req->cmd); - if (host->dma_in_use) - omap_start_dma(host->dma_ch); + if (host->dma_in_use) { + struct dma_chan *c = host->data->flags & MMC_DATA_WRITE ? + host->dma_tx : host->dma_rx; + + dma_async_issue_pending(c); + } } static void mmc_omap_request(struct mmc_host *mmc, struct mmc_request *req) @@ -1400,6 +1319,8 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev) struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; struct mmc_omap_host *host = NULL; struct resource *res; + dma_cap_mask_t mask; + unsigned sig; int i, ret = 0; int irq; @@ -1439,7 +1360,6 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev) setup_timer(&host->clk_timer, mmc_omap_clk_timer, (unsigned long) host); spin_lock_init(&host->dma_lock); - setup_timer(&host->dma_timer, mmc_omap_dma_timer, (unsigned long) host); spin_lock_init(&host->slot_lock); init_waitqueue_head(&host->slot_wq); @@ -1450,11 +1370,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev) host->id = pdev->id; host->mem_res = res; host->irq = irq; - host->use_dma = 1; - host->dev->dma_mask = &pdata->dma_mask; - host->dma_ch = -1; - host->irq = irq; host->phys_base = host->mem_res->start; host->virt_base = ioremap(res->start, resource_size(res)); @@ -1474,9 +1390,48 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev) goto err_free_iclk; } + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host->dma_tx_burst = -1; + host->dma_rx_burst = -1; + + if (cpu_is_omap24xx()) + sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX; + else + sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX; + host->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig); +#if 0 + if (!host->dma_tx) { + dev_err(host->dev, "unable to obtain TX DMA engine channel %u\n", + sig); + goto err_dma; + } +#else + if (!host->dma_tx) + dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n", + sig); +#endif + if (cpu_is_omap24xx()) + sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX; + else + sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX; + host->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig); +#if 0 + if (!host->dma_rx) { + dev_err(host->dev, "unable to obtain RX DMA engine channel %u\n", + sig); + goto err_dma; + } +#else + if (!host->dma_rx) + dev_warn(host->dev, "unable to obtain RX DMA engine channel %u\n", + sig); +#endif + ret = request_irq(host->irq, mmc_omap_irq, 0, DRIVER_NAME, host); if (ret) - goto err_free_fclk; + goto err_free_dma; if (pdata->init != NULL) { ret = pdata->init(&pdev->dev); @@ -1510,7 +1465,11 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev) pdata->cleanup(&pdev->dev); err_free_irq: free_irq(host->irq, host); -err_free_fclk: +err_free_dma: + if (host->dma_tx) + dma_release_channel(host->dma_tx); + if (host->dma_rx) + dma_release_channel(host->dma_rx); clk_put(host->fclk); err_free_iclk: clk_disable(host->iclk); @@ -1545,6 +1504,11 @@ static int __devexit mmc_omap_remove(struct platform_device *pdev) clk_disable(host->iclk); clk_put(host->iclk); + if (host->dma_tx) + dma_release_channel(host->dma_tx); + if (host->dma_rx) + dma_release_channel(host->dma_rx); + iounmap(host->virt_base); release_mem_region(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1); diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index bc28627af66b961372f0f38cc0bbe61d621cc99a..3a09f93cc3b6f846a2b4cd327a7fd2a4524e31bc 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -29,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -37,7 +39,6 @@ #include #include #include -#include #include #include #include @@ -166,7 +167,8 @@ struct omap_hsmmc_host { int suspended; int irq; int use_dma, dma_ch; - int dma_line_tx, dma_line_rx; + struct dma_chan *tx_chan; + struct dma_chan *rx_chan; int slot_id; int response_busy; int context_loss; @@ -797,6 +799,12 @@ omap_hsmmc_get_dma_dir(struct omap_hsmmc_host *host, struct mmc_data *data) return DMA_FROM_DEVICE; } +static struct dma_chan *omap_hsmmc_get_dma_chan(struct omap_hsmmc_host *host, + struct mmc_data *data) +{ + return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan; +} + static void omap_hsmmc_request_done(struct omap_hsmmc_host *host, struct mmc_request *mrq) { int dma_ch; @@ -889,10 +897,13 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) spin_unlock_irqrestore(&host->irq_lock, flags); if (host->use_dma && dma_ch != -1) { - dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, - host->data->sg_len, + struct dma_chan *chan = omap_hsmmc_get_dma_chan(host, host->data); + + dmaengine_terminate_all(chan); + dma_unmap_sg(chan->device->dev, + host->data->sg, host->data->sg_len, omap_hsmmc_get_dma_dir(host, host->data)); - omap_free_dma(dma_ch); + host->data->host_cookie = 0; } host->data = NULL; @@ -1190,90 +1201,29 @@ static irqreturn_t omap_hsmmc_detect(int irq, void *dev_id) return IRQ_HANDLED; } -static int omap_hsmmc_get_dma_sync_dev(struct omap_hsmmc_host *host, - struct mmc_data *data) -{ - int sync_dev; - - if (data->flags & MMC_DATA_WRITE) - sync_dev = host->dma_line_tx; - else - sync_dev = host->dma_line_rx; - return sync_dev; -} - -static void omap_hsmmc_config_dma_params(struct omap_hsmmc_host *host, - struct mmc_data *data, - struct scatterlist *sgl) -{ - int blksz, nblk, dma_ch; - - dma_ch = host->dma_ch; - if (data->flags & MMC_DATA_WRITE) { - omap_set_dma_dest_params(dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, - (host->mapbase + OMAP_HSMMC_DATA), 0, 0); - omap_set_dma_src_params(dma_ch, 0, OMAP_DMA_AMODE_POST_INC, - sg_dma_address(sgl), 0, 0); - } else { - omap_set_dma_src_params(dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, - (host->mapbase + OMAP_HSMMC_DATA), 0, 0); - omap_set_dma_dest_params(dma_ch, 0, OMAP_DMA_AMODE_POST_INC, - sg_dma_address(sgl), 0, 0); - } - - blksz = host->data->blksz; - nblk = sg_dma_len(sgl) / blksz; - - omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32, - blksz / 4, nblk, OMAP_DMA_SYNC_FRAME, - omap_hsmmc_get_dma_sync_dev(host, data), - !(data->flags & MMC_DATA_WRITE)); - - omap_start_dma(dma_ch); -} - -/* - * DMA call back function - */ -static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data) +static void omap_hsmmc_dma_callback(void *param) { - struct omap_hsmmc_host *host = cb_data; + struct omap_hsmmc_host *host = param; + struct dma_chan *chan; struct mmc_data *data; - int dma_ch, req_in_progress; - unsigned long flags; - - if (!(ch_status & OMAP_DMA_BLOCK_IRQ)) { - dev_warn(mmc_dev(host->mmc), "unexpected dma status %x\n", - ch_status); - return; - } + int req_in_progress; - spin_lock_irqsave(&host->irq_lock, flags); + spin_lock_irq(&host->irq_lock); if (host->dma_ch < 0) { - spin_unlock_irqrestore(&host->irq_lock, flags); + spin_unlock_irq(&host->irq_lock); return; } data = host->mrq->data; - host->dma_sg_idx++; - if (host->dma_sg_idx < host->dma_len) { - /* Fire up the next transfer. */ - omap_hsmmc_config_dma_params(host, data, - data->sg + host->dma_sg_idx); - spin_unlock_irqrestore(&host->irq_lock, flags); - return; - } - + chan = omap_hsmmc_get_dma_chan(host, data); if (!data->host_cookie) - dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + dma_unmap_sg(chan->device->dev, + data->sg, data->sg_len, omap_hsmmc_get_dma_dir(host, data)); req_in_progress = host->req_in_progress; - dma_ch = host->dma_ch; host->dma_ch = -1; - spin_unlock_irqrestore(&host->irq_lock, flags); - - omap_free_dma(dma_ch); + spin_unlock_irq(&host->irq_lock); /* If DMA has finished after TC, complete the request */ if (!req_in_progress) { @@ -1286,7 +1236,8 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data) static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host, struct mmc_data *data, - struct omap_hsmmc_next *next) + struct omap_hsmmc_next *next, + struct dma_chan *chan) { int dma_len; @@ -1301,8 +1252,7 @@ static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host, /* Check if next job is already prepared */ if (next || (!next && data->host_cookie != host->next_data.cookie)) { - dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, + dma_len = dma_map_sg(chan->device->dev, data->sg, data->sg_len, omap_hsmmc_get_dma_dir(host, data)); } else { @@ -1329,8 +1279,11 @@ static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host, static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host, struct mmc_request *req) { - int dma_ch = 0, ret = 0, i; + struct dma_slave_config cfg; + struct dma_async_tx_descriptor *tx; + int ret = 0, i; struct mmc_data *data = req->data; + struct dma_chan *chan; /* Sanity check: all the SG entries must be aligned by block size. */ for (i = 0; i < data->sg_len; i++) { @@ -1348,22 +1301,41 @@ static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host, BUG_ON(host->dma_ch != -1); - ret = omap_request_dma(omap_hsmmc_get_dma_sync_dev(host, data), - "MMC/SD", omap_hsmmc_dma_cb, host, &dma_ch); - if (ret != 0) { - dev_err(mmc_dev(host->mmc), - "%s: omap_request_dma() failed with %d\n", - mmc_hostname(host->mmc), ret); + chan = omap_hsmmc_get_dma_chan(host, data); + + cfg.src_addr = host->mapbase + OMAP_HSMMC_DATA; + cfg.dst_addr = host->mapbase + OMAP_HSMMC_DATA; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.src_maxburst = data->blksz / 4; + cfg.dst_maxburst = data->blksz / 4; + + ret = dmaengine_slave_config(chan, &cfg); + if (ret) return ret; - } - ret = omap_hsmmc_pre_dma_transfer(host, data, NULL); + + ret = omap_hsmmc_pre_dma_transfer(host, data, NULL, chan); if (ret) return ret; - host->dma_ch = dma_ch; - host->dma_sg_idx = 0; + tx = dmaengine_prep_slave_sg(chan, data->sg, data->sg_len, + data->flags & MMC_DATA_WRITE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!tx) { + dev_err(mmc_dev(host->mmc), "prep_slave_sg() failed\n"); + /* FIXME: cleanup */ + return -1; + } + + tx->callback = omap_hsmmc_dma_callback; + tx->callback_param = host; - omap_hsmmc_config_dma_params(host, data, data->sg); + /* Does not fail */ + dmaengine_submit(tx); + + host->dma_ch = 1; + + dma_async_issue_pending(chan); return 0; } @@ -1445,11 +1417,11 @@ static void omap_hsmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, struct omap_hsmmc_host *host = mmc_priv(mmc); struct mmc_data *data = mrq->data; - if (host->use_dma) { - if (data->host_cookie) - dma_unmap_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, - omap_hsmmc_get_dma_dir(host, data)); + if (host->use_dma && data->host_cookie) { + struct dma_chan *c = omap_hsmmc_get_dma_chan(host, data); + + dma_unmap_sg(c->device->dev, data->sg, data->sg_len, + omap_hsmmc_get_dma_dir(host, data)); data->host_cookie = 0; } } @@ -1464,10 +1436,13 @@ static void omap_hsmmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq, return ; } - if (host->use_dma) + if (host->use_dma) { + struct dma_chan *c = omap_hsmmc_get_dma_chan(host, mrq->data); + if (omap_hsmmc_pre_dma_transfer(host, mrq->data, - &host->next_data)) + &host->next_data, c)) mrq->data->host_cookie = 0; + } } /* @@ -1800,6 +1775,8 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev) struct resource *res; int ret, irq; const struct of_device_id *match; + dma_cap_mask_t mask; + unsigned tx_req, rx_req; match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev); if (match) { @@ -1844,7 +1821,6 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev) host->pdata = pdata; host->dev = &pdev->dev; host->use_dma = 1; - host->dev->dma_mask = &pdata->dma_mask; host->dma_ch = -1; host->irq = irq; host->slot_id = 0; @@ -1934,7 +1910,7 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev) ret = -ENXIO; goto err_irq; } - host->dma_line_tx = res->start; + tx_req = res->start; res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); if (!res) { @@ -1942,7 +1918,24 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev) ret = -ENXIO; goto err_irq; } - host->dma_line_rx = res->start; + rx_req = res->start; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host->rx_chan = dma_request_channel(mask, omap_dma_filter_fn, &rx_req); + if (!host->rx_chan) { + dev_err(mmc_dev(host->mmc), "unable to obtain RX DMA engine channel %u\n", rx_req); + ret = -ENXIO; + goto err_irq; + } + + host->tx_chan = dma_request_channel(mask, omap_dma_filter_fn, &tx_req); + if (!host->tx_chan) { + dev_err(mmc_dev(host->mmc), "unable to obtain TX DMA engine channel %u\n", tx_req); + ret = -ENXIO; + goto err_irq; + } /* Request IRQ for MMC operations */ ret = request_irq(host->irq, omap_hsmmc_irq, 0, @@ -2021,6 +2014,10 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev) err_irq_cd_init: free_irq(host->irq, host); err_irq: + if (host->tx_chan) + dma_release_channel(host->tx_chan); + if (host->rx_chan) + dma_release_channel(host->rx_chan); pm_runtime_put_sync(host->dev); pm_runtime_disable(host->dev); clk_put(host->fclk); @@ -2056,6 +2053,11 @@ static int __devexit omap_hsmmc_remove(struct platform_device *pdev) if (mmc_slot(host).card_detect_irq) free_irq(mmc_slot(host).card_detect_irq, host); + if (host->tx_chan) + dma_release_channel(host->tx_chan); + if (host->rx_chan) + dma_release_channel(host->rx_chan); + pm_runtime_put_sync(host->dev); pm_runtime_disable(host->dev); clk_put(host->fclk); diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index b97b2f5dafdb4d15160701dd12060b05c394b464..d25f9ab9a54da919a6e54cc05743f74ad83362f1 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -48,14 +48,14 @@ static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock) int div = 1; u32 temp; + if (clock == 0) + goto out; + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK); sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); - if (clock == 0) - goto out; - while (host->max_clk / pre_div / 16 > clock && pre_div < 256) pre_div *= 2; diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index cfff454f628ba73498f0876355e9c1266d67c7fa..c3bb304eca076ffab133b7cd1e6a363a0763dfaa 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -19,14 +19,13 @@ #include #include #include +#include /****************************************************************************/ -extern char _ebss; - struct map_info uclinux_ram_map = { .name = "RAM", - .phys = (unsigned long)&_ebss, + .phys = (unsigned long)__bss_stop, .size = 0, }; diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index f2f482bec5736b21a562da5e4fda11375e8cf457..a6e74514e6624e95f8e6e56fb319d567b1011f78 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -1123,6 +1123,33 @@ static unsigned long mtdchar_get_unmapped_area(struct file *file, } #endif +static inline unsigned long get_vm_size(struct vm_area_struct *vma) +{ + return vma->vm_end - vma->vm_start; +} + +static inline resource_size_t get_vm_offset(struct vm_area_struct *vma) +{ + return (resource_size_t) vma->vm_pgoff << PAGE_SHIFT; +} + +/* + * Set a new vm offset. + * + * Verify that the incoming offset really works as a page offset, + * and that the offset and size fit in a resource_size_t. + */ +static inline int set_vm_offset(struct vm_area_struct *vma, resource_size_t off) +{ + pgoff_t pgoff = off >> PAGE_SHIFT; + if (off != (resource_size_t) pgoff << PAGE_SHIFT) + return -EINVAL; + if (off + get_vm_size(vma) - 1 < off) + return -EINVAL; + vma->vm_pgoff = pgoff; + return 0; +} + /* * set up a mapping for shared memory segments */ @@ -1132,20 +1159,29 @@ static int mtdchar_mmap(struct file *file, struct vm_area_struct *vma) struct mtd_file_info *mfi = file->private_data; struct mtd_info *mtd = mfi->mtd; struct map_info *map = mtd->priv; - unsigned long start; - unsigned long off; - u32 len; + resource_size_t start, off; + unsigned long len, vma_len; if (mtd->type == MTD_RAM || mtd->type == MTD_ROM) { - off = vma->vm_pgoff << PAGE_SHIFT; + off = get_vm_offset(vma); start = map->phys; len = PAGE_ALIGN((start & ~PAGE_MASK) + map->size); start &= PAGE_MASK; - if ((vma->vm_end - vma->vm_start + off) > len) + vma_len = get_vm_size(vma); + + /* Overflow in off+len? */ + if (vma_len + off < off) + return -EINVAL; + /* Does it fit in the mapping? */ + if (vma_len + off > len) return -EINVAL; off += start; - vma->vm_pgoff = off >> PAGE_SHIFT; + /* Did that overflow? */ + if (off < start) + return -EINVAL; + if (set_vm_offset(vma, off) < 0) + return -EINVAL; vma->vm_flags |= VM_IO | VM_RESERVED; #ifdef pgprot_noncached diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 31bb7e5b504aa8f05e31472787d2dac7aff9659f..8ca417614c5751f12354cff4b11a7aa94aaa4fcf 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -480,7 +480,7 @@ config MTD_NAND_NANDSIM config MTD_NAND_GPMI_NAND bool "GPMI NAND Flash Controller driver" - depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q) + depends on MTD_NAND && MXS_DMA help Enables NAND Flash support for IMX23 or IMX28. The GPMI controller is very powerful, with the help of BCH diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index d7f681d0c9b98e54023cdce755b2febf6a983708..ac4fd756eda375ab40f873b9f29bcaad0a5aeea0 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -9,6 +9,7 @@ */ #include +#include #include #include #include @@ -18,6 +19,7 @@ #include #include #include +#include #include #include @@ -123,7 +125,7 @@ struct omap_nand_info { int gpmc_cs; unsigned long phys_base; struct completion comp; - int dma_ch; + struct dma_chan *dma; int gpmc_irq; enum { OMAP_NAND_IO_READ = 0, /* read */ @@ -336,12 +338,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd, } /* - * omap_nand_dma_cb: callback on the completion of dma transfer - * @lch: logical channel - * @ch_satuts: channel status + * omap_nand_dma_callback: callback on the completion of dma transfer * @data: pointer to completion data structure */ -static void omap_nand_dma_cb(int lch, u16 ch_status, void *data) +static void omap_nand_dma_callback(void *data) { complete((struct completion *) data); } @@ -358,17 +358,13 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, { struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); + struct dma_async_tx_descriptor *tx; enum dma_data_direction dir = is_write ? DMA_TO_DEVICE : DMA_FROM_DEVICE; - dma_addr_t dma_addr; - int ret; + struct scatterlist sg; unsigned long tim, limit; - - /* The fifo depth is 64 bytes max. - * But configure the FIFO-threahold to 32 to get a sync at each frame - * and frame length is 32 bytes. - */ - int buf_len = len >> 6; + unsigned n; + int ret; if (addr >= high_memory) { struct page *p1; @@ -382,40 +378,33 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK); } - dma_addr = dma_map_single(&info->pdev->dev, addr, len, dir); - if (dma_mapping_error(&info->pdev->dev, dma_addr)) { + sg_init_one(&sg, addr, len); + n = dma_map_sg(info->dma->device->dev, &sg, 1, dir); + if (n == 0) { dev_err(&info->pdev->dev, "Couldn't DMA map a %d byte buffer\n", len); goto out_copy; } - if (is_write) { - omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, - info->phys_base, 0, 0); - omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC, - dma_addr, 0, 0); - omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32, - 0x10, buf_len, OMAP_DMA_SYNC_FRAME, - OMAP24XX_DMA_GPMC, OMAP_DMA_DST_SYNC); - } else { - omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, - info->phys_base, 0, 0); - omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC, - dma_addr, 0, 0); - omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32, - 0x10, buf_len, OMAP_DMA_SYNC_FRAME, - OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC); - } - /* configure and start prefetch transfer */ + tx = dmaengine_prep_slave_sg(info->dma, &sg, n, + is_write ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!tx) + goto out_copy_unmap; + + tx->callback = omap_nand_dma_callback; + tx->callback_param = &info->comp; + dmaengine_submit(tx); + + /* configure and start prefetch transfer */ ret = gpmc_prefetch_enable(info->gpmc_cs, - PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write); + PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write); if (ret) /* PFPW engine is busy, use cpu copy method */ goto out_copy_unmap; init_completion(&info->comp); - - omap_start_dma(info->dma_ch); + dma_async_issue_pending(info->dma); /* setup and start DMA using dma_addr */ wait_for_completion(&info->comp); @@ -427,11 +416,11 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, /* disable and stop the PFPW engine */ gpmc_prefetch_reset(info->gpmc_cs); - dma_unmap_single(&info->pdev->dev, dma_addr, len, dir); + dma_unmap_sg(info->dma->device->dev, &sg, 1, dir); return 0; out_copy_unmap: - dma_unmap_single(&info->pdev->dev, dma_addr, len, dir); + dma_unmap_sg(info->dma->device->dev, &sg, 1, dir); out_copy: if (info->nand.options & NAND_BUSWIDTH_16) is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len) @@ -1164,6 +1153,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) struct omap_nand_platform_data *pdata; int err; int i, offset; + dma_cap_mask_t mask; + unsigned sig; pdata = pdev->dev.platform_data; if (pdata == NULL) { @@ -1244,18 +1235,30 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) break; case NAND_OMAP_PREFETCH_DMA: - err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND", - omap_nand_dma_cb, &info->comp, &info->dma_ch); - if (err < 0) { - info->dma_ch = -1; - dev_err(&pdev->dev, "DMA request failed!\n"); + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + sig = OMAP24XX_DMA_GPMC; + info->dma = dma_request_channel(mask, omap_dma_filter_fn, &sig); + if (!info->dma) { + dev_err(&pdev->dev, "DMA engine request failed\n"); + err = -ENXIO; goto out_release_mem_region; } else { - omap_set_dma_dest_burst_mode(info->dma_ch, - OMAP_DMA_DATA_BURST_16); - omap_set_dma_src_burst_mode(info->dma_ch, - OMAP_DMA_DATA_BURST_16); - + struct dma_slave_config cfg; + + memset(&cfg, 0, sizeof(cfg)); + cfg.src_addr = info->phys_base; + cfg.dst_addr = info->phys_base; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.src_maxburst = 16; + cfg.dst_maxburst = 16; + err = dmaengine_slave_config(info->dma, &cfg); + if (err) { + dev_err(&pdev->dev, "DMA engine slave config failed: %d\n", + err); + goto out_release_mem_region; + } info->nand.read_buf = omap_read_buf_dma_pref; info->nand.write_buf = omap_write_buf_dma_pref; } @@ -1358,6 +1361,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) return 0; out_release_mem_region: + if (info->dma) + dma_release_channel(info->dma); release_mem_region(info->phys_base, NAND_IO_SIZE); out_free_info: kfree(info); @@ -1373,8 +1378,8 @@ static int omap_nand_remove(struct platform_device *pdev) omap3_free_bch(&info->mtd); platform_set_drvdata(pdev, NULL); - if (info->dma_ch != -1) - omap_free_dma(info->dma_ch); + if (info->dma) + dma_release_channel(info->dma); if (info->gpmc_irq) free_irq(info->gpmc_irq, info); diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c index 437bc193e170d6da377d6b7447adc5cc43d348bb..568307cc7caf8d882034011aa5303ad47eaf3bed 100644 --- a/drivers/mtd/ubi/vtbl.c +++ b/drivers/mtd/ubi/vtbl.c @@ -340,7 +340,7 @@ static int create_vtbl(struct ubi_device *ubi, struct ubi_attach_info *ai, * of this LEB as it will be deleted and freed in 'ubi_add_to_av()'. */ err = ubi_add_to_av(ubi, ai, new_aeb->pnum, new_aeb->ec, vid_hdr, 0); - kfree(new_aeb); + kmem_cache_free(ai->aeb_slab_cache, new_aeb); ubi_free_vid_hdr(ubi, vid_hdr); return err; @@ -353,7 +353,7 @@ static int create_vtbl(struct ubi_device *ubi, struct ubi_attach_info *ai, list_add(&new_aeb->u.list, &ai->erase); goto retry; } - kfree(new_aeb); + kmem_cache_free(ai->aeb_slab_cache, new_aeb); out_free: ubi_free_vid_hdr(ubi, vid_hdr); return err; diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index 545c09ed9079baead2abff5ad9b309a5a0856cac..cff6f023c03a2c78e9869375f93b00c3201af802 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -996,9 +996,7 @@ static int __init cops_module_init(void) printk(KERN_WARNING "%s: You shouldn't autoprobe with insmod\n", cardname); cops_dev = cops_probe(-1); - if (IS_ERR(cops_dev)) - return PTR_ERR(cops_dev); - return 0; + return PTR_RET(cops_dev); } static void __exit cops_module_exit(void) diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index 0910dce3996d08a64c5c158056e0430c472962f1..b5782cdf0bcae1b5500b31477c26a54194f67f41 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -1243,9 +1243,7 @@ static int __init ltpc_module_init(void) "ltpc: Autoprobing is not recommended for modules\n"); dev_ltpc = ltpc_probe(); - if (IS_ERR(dev_ltpc)) - return PTR_ERR(dev_ltpc); - return 0; + return PTR_RET(dev_ltpc); } module_init(ltpc_module_init); #endif diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 6fae5f3ec7f6d646e4efc79aac1a0449ca5bde21..d688a8af432c52a8ea3dc5e45607c2801e9fb831 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -398,7 +398,7 @@ int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping)); skb->queue_mapping = qdisc_skb_cb(skb)->slave_dev_queue_mapping; - if (unlikely(netpoll_tx_running(slave_dev))) + if (unlikely(netpoll_tx_running(bond->dev))) bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb); else dev_queue_xmit(skb); @@ -1235,12 +1235,12 @@ static inline int slave_enable_netpoll(struct slave *slave) struct netpoll *np; int err = 0; - np = kzalloc(sizeof(*np), GFP_KERNEL); + np = kzalloc(sizeof(*np), GFP_ATOMIC); err = -ENOMEM; if (!np) goto out; - err = __netpoll_setup(np, slave->dev); + err = __netpoll_setup(np, slave->dev, GFP_ATOMIC); if (err) { kfree(np); goto out; @@ -1257,9 +1257,7 @@ static inline void slave_disable_netpoll(struct slave *slave) return; slave->np = NULL; - synchronize_rcu_bh(); - __netpoll_cleanup(np); - kfree(np); + __netpoll_free_rcu(np); } static inline bool slave_dev_support_netpoll(struct net_device *slave_dev) { @@ -1292,7 +1290,7 @@ static void bond_netpoll_cleanup(struct net_device *bond_dev) read_unlock(&bond->lock); } -static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni) +static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni, gfp_t gfp) { struct bonding *bond = netdev_priv(dev); struct slave *slave; diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c index 98ee4381991189d8814600967acac3b170525b1d..7edadee487bab16c0cbcf514ab59540f35cc2a41 100644 --- a/drivers/net/can/janz-ican3.c +++ b/drivers/net/can/janz-ican3.c @@ -1391,7 +1391,6 @@ static irqreturn_t ican3_irq(int irq, void *dev_id) */ static int ican3_reset_module(struct ican3_dev *mod) { - u8 val = 1 << mod->num; unsigned long start; u8 runold, runnew; @@ -1405,8 +1404,7 @@ static int ican3_reset_module(struct ican3_dev *mod) runold = ioread8(mod->dpm + TARGET_RUNNING); /* reset the module */ - iowrite8(val, &mod->ctrl->reset_assert); - iowrite8(val, &mod->ctrl->reset_deassert); + iowrite8(0x00, &mod->dpmctrl->hwreset); /* wait until the module has finished resetting and is running */ start = jiffies; diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c index a580db29e50360f8be44403e5893764261562549..26e7129332abc7e18bd7b27cd3f49d67976c3a16 100644 --- a/drivers/net/can/mcp251x.c +++ b/drivers/net/can/mcp251x.c @@ -83,6 +83,11 @@ #define INSTRUCTION_LOAD_TXB(n) (0x40 + 2 * (n)) #define INSTRUCTION_READ_RXB(n) (((n) == 0) ? 0x90 : 0x94) #define INSTRUCTION_RESET 0xC0 +#define RTS_TXB0 0x01 +#define RTS_TXB1 0x02 +#define RTS_TXB2 0x04 +#define INSTRUCTION_RTS(n) (0x80 | ((n) & 0x07)) + /* MPC251x registers */ #define CANSTAT 0x0e @@ -397,6 +402,7 @@ static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf, static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame, int tx_buf_idx) { + struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev); u32 sid, eid, exide, rtr; u8 buf[SPI_TRANSFER_BUF_LEN]; @@ -418,7 +424,10 @@ static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame, buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->can_dlc; memcpy(buf + TXBDAT_OFF, frame->data, frame->can_dlc); mcp251x_hw_tx_frame(spi, buf, frame->can_dlc, tx_buf_idx); - mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx), TXBCTRL_TXREQ); + + /* use INSTRUCTION_RTS, to avoid "repeated frame problem" */ + priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx); + mcp251x_spi_trans(priv->spi, 1); } static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf, diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c index 4f50145f64839f519c232d0e4ec79e7fedf2bd34..662c5f7eb0c54af4cb3c788959109a7693798629 100644 --- a/drivers/net/can/sja1000/sja1000_platform.c +++ b/drivers/net/can/sja1000/sja1000_platform.c @@ -109,7 +109,9 @@ static int sp_probe(struct platform_device *pdev) priv = netdev_priv(dev); dev->irq = res_irq->start; - priv->irq_flags = res_irq->flags & (IRQF_TRIGGER_MASK | IRQF_SHARED); + priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK; + if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE) + priv->irq_flags |= IRQF_SHARED; priv->reg_base = addr; /* The CAN clock frequency is half the oscillator clock frequency */ priv->can.clock.freq = pdata->osc_freq / 2; diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c index 3105961756767cb3b52bc18bce8a248e7ef110b7..b595d3422b9f759d86c760370b30efcb04f76575 100644 --- a/drivers/net/can/softing/softing_fw.c +++ b/drivers/net/can/softing/softing_fw.c @@ -150,7 +150,7 @@ int softing_load_fw(const char *file, struct softing *card, const uint8_t *mem, *end, *dat; uint16_t type, len; uint32_t addr; - uint8_t *buf = NULL; + uint8_t *buf = NULL, *new_buf; int buflen = 0; int8_t type_end = 0; @@ -199,11 +199,12 @@ int softing_load_fw(const char *file, struct softing *card, if (len > buflen) { /* align buflen */ buflen = (len + (1024-1)) & ~(1024-1); - buf = krealloc(buf, buflen, GFP_KERNEL); - if (!buf) { + new_buf = krealloc(buf, buflen, GFP_KERNEL); + if (!new_buf) { ret = -ENOMEM; goto failed; } + buf = new_buf; } /* verify record data */ memcpy_fromio(buf, &dpram[addr + offset], len); diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index 527dbcf9533561489bb33332f03462ac5f405f43..9ded21e79db5866602706ca568dea6613bc0a727 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -984,12 +984,12 @@ static int __devexit ti_hecc_remove(struct platform_device *pdev) struct net_device *ndev = platform_get_drvdata(pdev); struct ti_hecc_priv *priv = netdev_priv(ndev); + unregister_candev(ndev); clk_disable(priv->clk); clk_put(priv->clk); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); iounmap(priv->base); release_mem_region(res->start, resource_size(res)); - unregister_candev(ndev); free_candev(ndev); platform_set_drvdata(pdev, NULL); diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index f0c8bd54ce2930d87a5c6479fef7e9f39e4ca37d..021d69c5d9bc951797ede8e72dde15bad706613b 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -1712,7 +1712,7 @@ e100_set_network_leds(int active) static void e100_netpoll(struct net_device* netdev) { - e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL); + e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev); } #endif diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 79cebd8525ce3d451e30b935484dac18535939f2..e48312f2305db18a08b5744a01013455a7b732ab 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -8564,7 +8564,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; error: - iounmap(bp->regview); + pci_iounmap(pdev, bp->regview); pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 77bcd4cb4ffb945a8c696cc3f6bab1e363733c48..6d1a24acb77e1cb9332906759811980aa537b4e2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1278,7 +1278,7 @@ struct bnx2x { #define BNX2X_FW_RX_ALIGN_START (1UL << BNX2X_RX_ALIGN_SHIFT) #define BNX2X_FW_RX_ALIGN_END \ - max(1UL << BNX2X_RX_ALIGN_SHIFT, \ + max_t(u64, 1UL << BNX2X_RX_ALIGN_SHIFT, \ SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) #define BNX2X_PXP_DRAM_ALIGN (BNX2X_RX_ALIGN_SHIFT - 5) @@ -1708,9 +1708,6 @@ struct bnx2x_func_init_params { continue; \ else -#define for_each_napi_rx_queue(bp, var) \ - for ((var) = 0; (var) < bp->num_napi_queues; (var)++) - /* Skip OOO FP */ #define for_each_tx_queue(bp, var) \ for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e879e19eb0d68926a883ee55ffcaaa194a8b513b..e8e97a7d1d06df9a209c741406af32c19a1313e2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -662,14 +662,16 @@ void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe, struct bnx2x_fastpath *fp, struct bnx2x_eth_q_stats *qstats) { - /* Do nothing if no IP/L4 csum validation was done */ - + /* Do nothing if no L4 csum validation was done. + * We do not check whether IP csum was validated. For IPv4 we assume + * that if the card got as far as validating the L4 csum, it also + * validated the IP csum. IPv6 has no IP csum. + */ if (cqe->fast_path_cqe.status_flags & - (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG | - ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)) + ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) return; - /* If both IP/L4 validation were done, check if an error was found. */ + /* If L4 validation was done, check if an error was found. */ if (cqe->fast_path_cqe.type_error_flags & (ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG | @@ -2046,6 +2048,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) */ bnx2x_setup_tc(bp->dev, bp->max_cos); + /* Add all NAPI objects */ + bnx2x_add_all_napi(bp); bnx2x_napi_enable(bp); /* set pf load just before approaching the MCP */ @@ -2408,6 +2412,8 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) /* Disable HW interrupts, NAPI */ bnx2x_netif_stop(bp, 1); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); /* Release IRQs */ bnx2x_free_irq(bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index dfa757e742966998fb8e9ea8b99f2667b0835a43..dfd86a55f1dcab583ad08342a21eaae9a97be53f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -710,17 +710,15 @@ static inline u16 bnx2x_tx_avail(struct bnx2x *bp, prod = txdata->tx_bd_prod; cons = txdata->tx_bd_cons; - /* NUM_TX_RINGS = number of "next-page" entries - It will be used as a threshold */ - used = SUB_S16(prod, cons) + (s16)NUM_TX_RINGS; + used = SUB_S16(prod, cons); #ifdef BNX2X_STOP_ON_ERROR WARN_ON(used < 0); - WARN_ON(used > bp->tx_ring_size); - WARN_ON((bp->tx_ring_size - used) > MAX_TX_AVAIL); + WARN_ON(used > txdata->tx_ring_size); + WARN_ON((txdata->tx_ring_size - used) > MAX_TX_AVAIL); #endif - return (s16)(bp->tx_ring_size) - used; + return (s16)(txdata->tx_ring_size) - used; } static inline int bnx2x_tx_queue_has_work(struct bnx2x_fp_txdata *txdata) @@ -792,7 +790,7 @@ static inline void bnx2x_add_all_napi(struct bnx2x *bp) bp->num_napi_queues = bp->num_queues; /* Add NAPI objects */ - for_each_napi_rx_queue(bp, i) + for_each_rx_queue(bp, i) netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), bnx2x_poll, BNX2X_NAPI_WEIGHT); } @@ -801,7 +799,7 @@ static inline void bnx2x_del_all_napi(struct bnx2x *bp) { int i; - for_each_napi_rx_queue(bp, i) + for_each_rx_queue(bp, i) netif_napi_del(&bnx2x_fp(bp, i, napi)); } @@ -1088,6 +1086,7 @@ static inline void bnx2x_init_txdata(struct bnx2x *bp, txdata->txq_index = txq_index; txdata->tx_cons_sb = tx_cons_sb; txdata->parent_fp = fp; + txdata->tx_ring_size = IS_FCOE_FP(fp) ? MAX_TX_AVAIL : bp->tx_ring_size; DP(NETIF_MSG_IFUP, "created tx data cid %d, txq %d\n", txdata->cid, txdata->txq_index); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h index 3e4cff9b1ebee60a4fa4cedbb90fdeaecc73b580..b926f58e983bbfe083e004c362df6203efb17a3e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h @@ -401,11 +401,11 @@ static const struct reg_addr reg_addrs[] = { { 0x70000, 8, RI_ALL_ONLINE }, { 0x70020, 8184, RI_ALL_OFFLINE }, { 0x78000, 8192, RI_E3E3B0_OFFLINE }, - { 0x85000, 3, RI_ALL_ONLINE }, - { 0x8501c, 7, RI_ALL_ONLINE }, - { 0x85048, 1, RI_ALL_ONLINE }, - { 0x85200, 32, RI_ALL_ONLINE }, - { 0xb0000, 16384, RI_E1H_ONLINE }, + { 0x85000, 3, RI_ALL_OFFLINE }, + { 0x8501c, 7, RI_ALL_OFFLINE }, + { 0x85048, 1, RI_ALL_OFFLINE }, + { 0x85200, 32, RI_ALL_OFFLINE }, + { 0xb0000, 16384, RI_E1H_OFFLINE }, { 0xc1000, 7, RI_ALL_ONLINE }, { 0xc103c, 2, RI_E2E3E3B0_ONLINE }, { 0xc1800, 2, RI_ALL_ONLINE }, @@ -581,17 +581,12 @@ static const struct reg_addr reg_addrs[] = { { 0x140188, 3, RI_E1E1HE2E3_ONLINE }, { 0x140194, 13, RI_ALL_ONLINE }, { 0x140200, 6, RI_E1E1HE2E3_ONLINE }, - { 0x140220, 4, RI_E2E3_ONLINE }, - { 0x140240, 4, RI_E2E3_ONLINE }, { 0x140260, 4, RI_E2E3_ONLINE }, { 0x140280, 4, RI_E2E3_ONLINE }, - { 0x1402a0, 4, RI_E2E3_ONLINE }, - { 0x1402c0, 4, RI_E2E3_ONLINE }, { 0x1402e0, 2, RI_E2E3_ONLINE }, { 0x1402e8, 2, RI_E2E3E3B0_ONLINE }, { 0x1402f0, 9, RI_E2E3_ONLINE }, { 0x140314, 44, RI_E3B0_ONLINE }, - { 0x1403d0, 70, RI_E3B0_ONLINE }, { 0x144000, 4, RI_E1E1H_ONLINE }, { 0x148000, 4, RI_E1E1H_ONLINE }, { 0x14c000, 4, RI_E1E1H_ONLINE }, @@ -704,7 +699,6 @@ static const struct reg_addr reg_addrs[] = { { 0x180398, 1, RI_E2E3E3B0_ONLINE }, { 0x1803a0, 5, RI_E2E3E3B0_ONLINE }, { 0x1803b4, 2, RI_E3E3B0_ONLINE }, - { 0x180400, 1, RI_ALL_ONLINE }, { 0x180404, 255, RI_E1E1H_OFFLINE }, { 0x181000, 4, RI_ALL_ONLINE }, { 0x181010, 1020, RI_ALL_OFFLINE }, @@ -800,9 +794,9 @@ static const struct reg_addr reg_addrs[] = { { 0x1b905c, 1, RI_E3E3B0_ONLINE }, { 0x1b9064, 1, RI_E3B0_ONLINE }, { 0x1b9080, 10, RI_E3B0_ONLINE }, - { 0x1b9400, 14, RI_E2E3E3B0_ONLINE }, - { 0x1b943c, 19, RI_E2E3E3B0_ONLINE }, - { 0x1b9490, 10, RI_E2E3E3B0_ONLINE }, + { 0x1b9400, 14, RI_E2E3E3B0_OFFLINE }, + { 0x1b943c, 19, RI_E2E3E3B0_OFFLINE }, + { 0x1b9490, 10, RI_E2E3E3B0_OFFLINE }, { 0x1c0000, 2, RI_ALL_ONLINE }, { 0x200000, 65, RI_ALL_ONLINE }, { 0x20014c, 2, RI_E1HE2E3E3B0_ONLINE }, @@ -814,7 +808,6 @@ static const struct reg_addr reg_addrs[] = { { 0x200398, 1, RI_E2E3E3B0_ONLINE }, { 0x2003a0, 1, RI_E2E3E3B0_ONLINE }, { 0x2003a8, 2, RI_E2E3E3B0_ONLINE }, - { 0x200400, 1, RI_ALL_ONLINE }, { 0x200404, 255, RI_E1E1H_OFFLINE }, { 0x202000, 4, RI_ALL_ONLINE }, { 0x202010, 2044, RI_ALL_OFFLINE }, @@ -921,7 +914,6 @@ static const struct reg_addr reg_addrs[] = { { 0x280398, 1, RI_E2E3E3B0_ONLINE }, { 0x2803a0, 1, RI_E2E3E3B0_ONLINE }, { 0x2803a8, 2, RI_E2E3E3B0_ONLINE }, - { 0x280400, 1, RI_ALL_ONLINE }, { 0x280404, 255, RI_E1E1H_OFFLINE }, { 0x282000, 4, RI_ALL_ONLINE }, { 0x282010, 2044, RI_ALL_OFFLINE }, @@ -1031,7 +1023,6 @@ static const struct reg_addr reg_addrs[] = { { 0x300398, 1, RI_E2E3E3B0_ONLINE }, { 0x3003a0, 1, RI_E2E3E3B0_ONLINE }, { 0x3003a8, 2, RI_E2E3E3B0_ONLINE }, - { 0x300400, 1, RI_ALL_ONLINE }, { 0x300404, 255, RI_E1E1H_OFFLINE }, { 0x302000, 4, RI_ALL_ONLINE }, { 0x302010, 2044, RI_ALL_OFFLINE }, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index fc4e0e3885b039f0cb7dff48edade89e211de15b..ebf40cd7aa1050d716683e806eda505050bf1e40 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -775,7 +775,7 @@ static void bnx2x_get_regs(struct net_device *dev, struct bnx2x *bp = netdev_priv(dev); struct dump_hdr dump_hdr = {0}; - regs->version = 0; + regs->version = 1; memset(p, 0, regs->len); if (!netif_running(bp->dev)) @@ -1587,6 +1587,12 @@ static int bnx2x_set_pauseparam(struct net_device *dev, bp->link_params.req_flow_ctrl[cfg_idx] = BNX2X_FLOW_CTRL_AUTO; } + bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_NONE; + if (epause->rx_pause) + bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_RX; + + if (epause->tx_pause) + bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_TX; } DP(BNX2X_MSG_ETHTOOL, @@ -2888,11 +2894,9 @@ static void bnx2x_get_channels(struct net_device *dev, */ static void bnx2x_change_num_queues(struct bnx2x *bp, int num_rss) { - bnx2x_del_all_napi(bp); bnx2x_disable_msi(bp); BNX2X_NUM_QUEUES(bp) = num_rss + NON_ETH_CONTEXT_USE; bnx2x_set_int_mode(bp); - bnx2x_add_all_napi(bp); } /** diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index f4beb46c4709af8291ed7aecc373d7a72a366f59..b046beb435b2c490f70ef3bc2f67bf3af16bfcb5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -2667,9 +2667,11 @@ int bnx2x_update_pfc(struct link_params *params, return bnx2x_status; DP(NETIF_MSG_LINK, "About to update PFC in BMAC\n"); - if (CHIP_IS_E3(bp)) - bnx2x_update_pfc_xmac(params, vars, 0); - else { + + if (CHIP_IS_E3(bp)) { + if (vars->mac_type == MAC_TYPE_XMAC) + bnx2x_update_pfc_xmac(params, vars, 0); + } else { val = REG_RD(bp, MISC_REG_RESET_REG_2); if ((val & (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) @@ -5432,7 +5434,7 @@ static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy, switch (speed_mask) { case GP_STATUS_10M: vars->line_speed = SPEED_10; - if (vars->duplex == DUPLEX_FULL) + if (is_duplex == DUPLEX_FULL) vars->link_status |= LINK_10TFD; else vars->link_status |= LINK_10THD; @@ -5440,7 +5442,7 @@ static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy, case GP_STATUS_100M: vars->line_speed = SPEED_100; - if (vars->duplex == DUPLEX_FULL) + if (is_duplex == DUPLEX_FULL) vars->link_status |= LINK_100TXFD; else vars->link_status |= LINK_100TXHD; @@ -5449,7 +5451,7 @@ static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy, case GP_STATUS_1G: case GP_STATUS_1G_KX: vars->line_speed = SPEED_1000; - if (vars->duplex == DUPLEX_FULL) + if (is_duplex == DUPLEX_FULL) vars->link_status |= LINK_1000TFD; else vars->link_status |= LINK_1000THD; @@ -5457,7 +5459,7 @@ static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy, case GP_STATUS_2_5G: vars->line_speed = SPEED_2500; - if (vars->duplex == DUPLEX_FULL) + if (is_duplex == DUPLEX_FULL) vars->link_status |= LINK_2500TFD; else vars->link_status |= LINK_2500THD; @@ -5531,6 +5533,7 @@ static int bnx2x_link_settings_status(struct bnx2x_phy *phy, if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { if (SINGLE_MEDIA_DIRECT(params)) { + vars->duplex = duplex; bnx2x_flow_ctrl_resolve(phy, params, vars, gp_status); if (phy->req_line_speed == SPEED_AUTO_NEG) bnx2x_xgxs_an_resolve(phy, params, vars, @@ -5625,6 +5628,7 @@ static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy, LINK_STATUS_PARALLEL_DETECTION_USED; } bnx2x_ext_phy_resolve_fc(phy, params, vars); + vars->duplex = duplex; } } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index dd451c3dd83d1d614a13070e85ffc9a3e8c458e8..0875ecfe33729e2c2860dd5149e62042ddcbc6d7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -4041,20 +4041,6 @@ static bool bnx2x_get_load_status(struct bnx2x *bp, int engine) return val != 0; } -/* - * Reset the load status for the current engine. - */ -static void bnx2x_clear_load_status(struct bnx2x *bp) -{ - u32 val; - u32 mask = (BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : - BNX2X_PATH0_LOAD_CNT_MASK); - bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); - val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); - REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~mask)); - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); -} - static void _print_next_block(int idx, const char *blk) { pr_cont("%s%s", idx ? ", " : "", blk); @@ -7575,8 +7561,14 @@ int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac, } rc = bnx2x_config_vlan_mac(bp, &ramrod_param); - if (rc < 0) + + if (rc == -EEXIST) { + DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc); + /* do not treat adding same MAC as error */ + rc = 0; + } else if (rc < 0) BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del")); + return rc; } @@ -8441,6 +8433,8 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode) /* Disable HW interrupts, NAPI */ bnx2x_netif_stop(bp, 1); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); /* Release IRQs */ bnx2x_free_irq(bp); @@ -9384,32 +9378,24 @@ static int __devinit bnx2x_prev_mark_path(struct bnx2x *bp) return rc; } -static bool __devinit bnx2x_can_flr(struct bnx2x *bp) -{ - int pos; - u32 cap; - struct pci_dev *dev = bp->pdev; - - pos = pci_pcie_cap(dev); - if (!pos) - return false; - - pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap); - if (!(cap & PCI_EXP_DEVCAP_FLR)) - return false; - - return true; -} - static int __devinit bnx2x_do_flr(struct bnx2x *bp) { int i, pos; u16 status; struct pci_dev *dev = bp->pdev; - /* probe the capability first */ - if (bnx2x_can_flr(bp)) - return -ENOTTY; + + if (CHIP_IS_E1x(bp)) { + BNX2X_DEV_INFO("FLR not supported in E1/E1H\n"); + return -EINVAL; + } + + /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */ + if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) { + BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n", + bp->common.bc_ver); + return -EINVAL; + } pos = pci_pcie_cap(dev); if (!pos) @@ -9429,12 +9415,8 @@ static int __devinit bnx2x_do_flr(struct bnx2x *bp) "transaction is not cleared; proceeding with reset anyway\n"); clear: - if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) { - BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n", - bp->common.bc_ver); - return -EINVAL; - } + BNX2X_DEV_INFO("Initiating FLR\n"); bnx2x_fw_command(bp, DRV_MSG_CODE_INITIATE_FLR, 0); return 0; @@ -9454,8 +9436,21 @@ static int __devinit bnx2x_prev_unload_uncommon(struct bnx2x *bp) * the one required, then FLR will be sufficient to clean any residue * left by previous driver */ - if (bnx2x_test_firmware_version(bp, false) && bnx2x_can_flr(bp)) - return bnx2x_do_flr(bp); + rc = bnx2x_test_firmware_version(bp, false); + + if (!rc) { + /* fw version is good */ + BNX2X_DEV_INFO("FW version matches our own. Attempting FLR\n"); + rc = bnx2x_do_flr(bp); + } + + if (!rc) { + /* FLR was performed */ + BNX2X_DEV_INFO("FLR successful\n"); + return 0; + } + + BNX2X_DEV_INFO("Could not FLR\n"); /* Close the MCP request, return failure*/ rc = bnx2x_prev_mcp_done(bp); @@ -9836,12 +9831,13 @@ static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp) } #ifdef CONFIG_PCI_MSI - /* - * It's expected that number of CAM entries for this functions is equal - * to the number evaluated based on the MSI-X table size. We want a - * harsh warning if these values are different! + /* Due to new PF resource allocation by MFW T7.4 and above, it's + * optional that number of CAM entries will not be equal to the value + * advertised in PCI. + * Driver should use the minimal value of both as the actual status + * block count */ - WARN_ON(bp->igu_sb_cnt != igu_sb_cnt); + bp->igu_sb_cnt = min_t(int, bp->igu_sb_cnt, igu_sb_cnt); #endif if (igu_sb_cnt == 0) @@ -10305,13 +10301,11 @@ static void __devinit bnx2x_get_fcoe_info(struct bnx2x *bp) dev_info.port_hw_config[port]. fcoe_wwn_node_name_lower); } else if (!IS_MF_SD(bp)) { - u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg); - /* * Read the WWN info only if the FCoE feature is enabled for * this function. */ - if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) + if (BNX2X_MF_EXT_PROTOCOL_FCOE(bp) && !CHIP_IS_E1x(bp)) bnx2x_get_ext_wwn_info(bp, func); } else if (IS_MF_FCOE_SD(bp)) @@ -11084,7 +11078,14 @@ static int bnx2x_set_uc_list(struct bnx2x *bp) netdev_for_each_uc_addr(ha, dev) { rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true, BNX2X_UC_LIST_MAC, &ramrod_flags); - if (rc < 0) { + if (rc == -EEXIST) { + DP(BNX2X_MSG_SP, + "Failed to schedule ADD operations: %d\n", rc); + /* do not treat adding same MAC as error */ + rc = 0; + + } else if (rc < 0) { + BNX2X_ERR("Failed to schedule ADD operations: %d\n", rc); return rc; @@ -11242,10 +11243,12 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) static void poll_bnx2x(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); + int i; - disable_irq(bp->pdev->irq); - bnx2x_interrupt(bp->pdev->irq, dev); - enable_irq(bp->pdev->irq); + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + napi_schedule(&bnx2x_fp(bp, fp->index, napi)); + } } #endif @@ -11427,9 +11430,6 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, if (!chip_is_e1x) REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); - /* Reset the load counter */ - bnx2x_clear_load_status(bp); - dev->watchdog_timeo = TX_TIMEOUT; dev->netdev_ops = &bnx2x_netdev_ops; @@ -11915,9 +11915,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, */ bnx2x_set_int_mode(bp); - /* Add all NAPI objects */ - bnx2x_add_all_napi(bp); - rc = register_netdev(dev); if (rc) { dev_err(&pdev->dev, "Cannot register net device\n"); @@ -11992,9 +11989,6 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev) unregister_netdev(dev); - /* Delete all NAPI objects */ - bnx2x_del_all_napi(bp); - /* Power on: we can't let PCI layer write to us while we are in D3 */ bnx2x_set_power_state(bp, PCI_D0); @@ -12041,6 +12035,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp) bnx2x_tx_disable(bp); bnx2x_netif_stop(bp, 0); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); del_timer_sync(&bp->timer); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 734fd87cd99093e0d30899006cb12cacd10a027c..62f754bd0dfe65704a1af826a754a720dc8cfd43 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -2485,6 +2485,7 @@ static int bnx2x_mcast_enqueue_cmd(struct bnx2x *bp, break; default: + kfree(new_cmd); BNX2X_ERR("Unknown command: %d\n", cmd); return -EINVAL; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index 332db64dd5bea11eed0cf878565c5c2e573f5c3e..a1d0446b39b356dd69e0b77e69f6285ba37edb63 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -101,6 +101,11 @@ static void bnx2x_hw_stats_post(struct bnx2x *bp) if (CHIP_REV_IS_SLOW(bp)) return; + /* Update MCP's statistics if possible */ + if (bp->func_stx) + memcpy(bnx2x_sp(bp, func_stats), &bp->func_stats, + sizeof(bp->func_stats)); + /* loader */ if (bp->executer_idx) { int loader_idx = PMF_DMAE_C(bp); @@ -128,8 +133,6 @@ static void bnx2x_hw_stats_post(struct bnx2x *bp) } else if (bp->func_stx) { *stats_comp = 0; - memcpy(bnx2x_sp(bp, func_stats), &bp->func_stats, - sizeof(bp->func_stats)); bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp)); } } @@ -1151,9 +1154,11 @@ static void bnx2x_stats_update(struct bnx2x *bp) if (bp->port.pmf) bnx2x_hw_stats_update(bp); - if (bnx2x_storm_stats_update(bp) && (bp->stats_pending++ == 3)) { - BNX2X_ERR("storm stats were not updated for 3 times\n"); - bnx2x_panic(); + if (bnx2x_storm_stats_update(bp)) { + if (bp->stats_pending++ == 3) { + BNX2X_ERR("storm stats were not updated for 3 times\n"); + bnx2x_panic(); + } return; } diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c index 77884191a8c6448a7eea54c94b8ba8d9ce0fef83..4e980a7886fb58758fa84071b2494f56364da1f2 100644 --- a/drivers/net/ethernet/cadence/at91_ether.c +++ b/drivers/net/ethernet/cadence/at91_ether.c @@ -1086,7 +1086,7 @@ static int __init at91ether_probe(struct platform_device *pdev) /* Clock */ lp->ether_clk = clk_get(&pdev->dev, "ether_clk"); if (IS_ERR(lp->ether_clk)) { - res = -ENODEV; + res = PTR_ERR(lp->ether_clk); goto err_ioumap; } clk_enable(lp->ether_clk); diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index 8596acaa402b4af43d3d0b9c59ac2dd107f478c1..d49933ed551f7a4fca4d6b71f0528aaf9f6a80d6 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -528,7 +528,7 @@ static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n, #endif while (n--) { - pg = alloc_page(gfp); + pg = __skb_alloc_page(gfp, NULL); if (unlikely(!pg)) { q->alloc_failed++; break; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c index f2d1ecdcaf98efe0801de112f36ba12ef81fbefd..8877fbfefb639ed5e7d6282981dd6f722dd6f5f5 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -653,7 +653,7 @@ static unsigned int refill_fl(struct adapter *adapter, struct sge_fl *fl, alloc_small_pages: while (n--) { - page = alloc_page(gfp | __GFP_NOWARN | __GFP_COLD); + page = __skb_alloc_page(gfp | __GFP_NOWARN, NULL); if (unlikely(!page)) { fl->alloc_failed++; break; diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index 845b2020f291cc20ad8223c8165512604314e812..138446957786a9ce0845a7e8221af4887b904ce3 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -1243,6 +1243,7 @@ static void set_multicast_list(struct net_device *dev) { struct net_local *lp = netdev_priv(dev); unsigned long flags; + u16 cfg; spin_lock_irqsave(&lp->lock, flags); if (dev->flags & IFF_PROMISC) @@ -1260,11 +1261,10 @@ static void set_multicast_list(struct net_device *dev) /* in promiscuous mode, we accept errored packets, * so we have to enable interrupts on them also */ - writereg(dev, PP_RxCFG, - (lp->curr_rx_cfg | - (lp->rx_mode == RX_ALL_ACCEPT) - ? (RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL) - : 0)); + cfg = lp->curr_rx_cfg; + if (lp->rx_mode == RX_ALL_ACCEPT) + cfg |= RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL; + writereg(dev, PP_RxCFG, cfg); spin_unlock_irqrestore(&lp->lock, flags); } diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 7fac97b4bb59c19ecaca1073d84c6a183ecd17b1..8c63d06ab12b6ccf899fae8fa13f75904beb22c1 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -259,7 +259,7 @@ int be_process_mcc(struct be_adapter *adapter) int num = 0, status = 0; struct be_mcc_obj *mcc_obj = &adapter->mcc_obj; - spin_lock_bh(&adapter->mcc_cq_lock); + spin_lock(&adapter->mcc_cq_lock); while ((compl = be_mcc_compl_get(adapter))) { if (compl->flags & CQE_FLAGS_ASYNC_MASK) { /* Interpret flags as an async trailer */ @@ -280,7 +280,7 @@ int be_process_mcc(struct be_adapter *adapter) if (num) be_cq_notify(adapter, mcc_obj->cq.id, mcc_obj->rearm_cq, num); - spin_unlock_bh(&adapter->mcc_cq_lock); + spin_unlock(&adapter->mcc_cq_lock); return status; } @@ -295,7 +295,9 @@ static int be_mcc_wait_compl(struct be_adapter *adapter) if (be_error(adapter)) return -EIO; + local_bh_disable(); status = be_process_mcc(adapter); + local_bh_enable(); if (atomic_read(&mcc_obj->q.used) == 0) break; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index c60de89b66696759a453ff4d69650c1905209c58..78b8aa8069f03c440ea6037f9dc3e86e81c62fe6 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1948,7 +1948,7 @@ static int be_rx_cqs_create(struct be_adapter *adapter) if (adapter->num_rx_qs != MAX_RX_QS) dev_info(&adapter->pdev->dev, - "Created only %d receive queues", adapter->num_rx_qs); + "Created only %d receive queues\n", adapter->num_rx_qs); return 0; } @@ -3763,7 +3763,9 @@ static void be_worker(struct work_struct *work) /* when interrupts are not yet enabled, just reap any pending * mcc completions */ if (!netif_running(adapter->netdev)) { + local_bh_disable(); be_process_mcc(adapter); + local_bh_enable(); goto reschedule; } diff --git a/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c b/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c index 0f2d1a710909e5044b3c2c402bf2aba0b950ff88..151453309401694360f311ccb09e0caea8480b01 100644 --- a/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c +++ b/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c @@ -174,8 +174,10 @@ static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev) new_bus->phy_mask = ~0; new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); - if (!new_bus->irq) + if (!new_bus->irq) { + ret = -ENOMEM; goto out_unmap_regs; + } new_bus->parent = &ofdev->dev; dev_set_drvdata(&ofdev->dev, new_bus); diff --git a/drivers/net/ethernet/freescale/fs_enet/mii-fec.c b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c index 55bb867258e6aa1d2baa1dbf4da546c705a2e83f..cdf702a594858146fd4f04ab02966d941edeeea5 100644 --- a/drivers/net/ethernet/freescale/fs_enet/mii-fec.c +++ b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c @@ -137,8 +137,10 @@ static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev) snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start); fec->fecp = ioremap(res.start, resource_size(&res)); - if (!fec->fecp) + if (!fec->fecp) { + ret = -ENOMEM; goto out_fec; + } if (get_bus_freq) { clock = get_bus_freq(ofdev->dev.of_node); @@ -172,8 +174,10 @@ static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev) new_bus->phy_mask = ~0; new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); - if (!new_bus->irq) + if (!new_bus->irq) { + ret = -ENOMEM; goto out_unmap_regs; + } new_bus->parent = &ofdev->dev; dev_set_drvdata(&ofdev->dev, new_bus); diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 4605f7246687d0898ad82e9c769026c741d6d540..d3233f59a82e47b1d70a372c0973e1447d0ef90b 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1041,7 +1041,7 @@ static int gfar_probe(struct platform_device *ofdev) if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) { dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; - dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + dev->features |= NETIF_F_HW_VLAN_RX; } if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) { diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index 8971921cc1c84966170b7f7a6350732f93b416e9..ab6762caa95702f492bbb457deae8986257bdcc4 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -1773,6 +1773,7 @@ static int gfar_get_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd, } int gfar_phc_index = -1; +EXPORT_SYMBOL(gfar_phc_index); static int gfar_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info) diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index c08e5d40fecb425c7f6c26b8de269d270bac727f..0daa66b8eca088735974f7ee45595d22c6be4c56 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -515,7 +515,7 @@ static int gianfar_ptp_probe(struct platform_device *dev) err = PTR_ERR(etsects->clock); goto no_clock; } - gfar_phc_clock = ptp_clock_index(etsects->clock); + gfar_phc_index = ptp_clock_index(etsects->clock); dev_set_drvdata(&dev->dev, etsects); @@ -539,7 +539,7 @@ static int gianfar_ptp_remove(struct platform_device *dev) gfar_write(&etsects->regs->tmr_temask, 0); gfar_write(&etsects->regs->tmr_ctrl, 0); - gfar_phc_clock = -1; + gfar_phc_index = -1; ptp_clock_unregister(etsects->clock); iounmap(etsects->regs); release_resource(etsects->rsrc); diff --git a/drivers/net/ethernet/i825xx/znet.c b/drivers/net/ethernet/i825xx/znet.c index bd1f1ef91e1910f81f454a7332337870fa031331..ba4e0cea3506f80da5cc36a69f22994a7a3e470e 100644 --- a/drivers/net/ethernet/i825xx/znet.c +++ b/drivers/net/ethernet/i825xx/znet.c @@ -139,8 +139,11 @@ struct znet_private { /* Only one can be built-in;-> */ static struct net_device *znet_dev; +#define NETIDBLK_MAGIC "NETIDBLK" +#define NETIDBLK_MAGIC_SIZE 8 + struct netidblk { - char magic[8]; /* The magic number (string) "NETIDBLK" */ + char magic[NETIDBLK_MAGIC_SIZE]; /* The magic number (string) "NETIDBLK" */ unsigned char netid[8]; /* The physical station address */ char nettype, globalopt; char vendor[8]; /* The machine vendor and product name. */ @@ -373,14 +376,16 @@ static int __init znet_probe (void) struct znet_private *znet; struct net_device *dev; char *p; + char *plast = phys_to_virt(0x100000 - NETIDBLK_MAGIC_SIZE); int err = -ENOMEM; /* This code scans the region 0xf0000 to 0xfffff for a "NETIDBLK". */ - for(p = (char *)phys_to_virt(0xf0000); p < (char *)phys_to_virt(0x100000); p++) - if (*p == 'N' && strncmp(p, "NETIDBLK", 8) == 0) + for(p = (char *)phys_to_virt(0xf0000); p <= plast; p++) + if (*p == 'N' && + strncmp(p, NETIDBLK_MAGIC, NETIDBLK_MAGIC_SIZE) == 0) break; - if (p >= (char *)phys_to_virt(0x100000)) { + if (p > plast) { if (znet_debug > 1) printk(KERN_INFO "No Z-Note ethernet adaptor found.\n"); return -ENODEV; diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c index 9010cea68bc3094a4b9b18b06cae1aa7d9796cd7..b68d28a130e664e2042bbb9a4335710964f861a7 100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@ -472,14 +472,9 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter) } if (adapter->rx_queue.queue_addr != NULL) { - if (!dma_mapping_error(dev, adapter->rx_queue.queue_dma)) { - dma_unmap_single(dev, - adapter->rx_queue.queue_dma, - adapter->rx_queue.queue_len, - DMA_BIDIRECTIONAL); - adapter->rx_queue.queue_dma = DMA_ERROR_CODE; - } - kfree(adapter->rx_queue.queue_addr); + dma_free_coherent(dev, adapter->rx_queue.queue_len, + adapter->rx_queue.queue_addr, + adapter->rx_queue.queue_dma); adapter->rx_queue.queue_addr = NULL; } @@ -556,10 +551,13 @@ static int ibmveth_open(struct net_device *netdev) goto err_out; } + dev = &adapter->vdev->dev; + adapter->rx_queue.queue_len = sizeof(struct ibmveth_rx_q_entry) * rxq_entries; - adapter->rx_queue.queue_addr = kmalloc(adapter->rx_queue.queue_len, - GFP_KERNEL); + adapter->rx_queue.queue_addr = + dma_alloc_coherent(dev, adapter->rx_queue.queue_len, + &adapter->rx_queue.queue_dma, GFP_KERNEL); if (!adapter->rx_queue.queue_addr) { netdev_err(netdev, "unable to allocate rx queue pages\n"); @@ -567,19 +565,13 @@ static int ibmveth_open(struct net_device *netdev) goto err_out; } - dev = &adapter->vdev->dev; - adapter->buffer_list_dma = dma_map_single(dev, adapter->buffer_list_addr, 4096, DMA_BIDIRECTIONAL); adapter->filter_list_dma = dma_map_single(dev, adapter->filter_list_addr, 4096, DMA_BIDIRECTIONAL); - adapter->rx_queue.queue_dma = dma_map_single(dev, - adapter->rx_queue.queue_addr, - adapter->rx_queue.queue_len, DMA_BIDIRECTIONAL); if ((dma_mapping_error(dev, adapter->buffer_list_dma)) || - (dma_mapping_error(dev, adapter->filter_list_dma)) || - (dma_mapping_error(dev, adapter->rx_queue.queue_dma))) { + (dma_mapping_error(dev, adapter->filter_list_dma))) { netdev_err(netdev, "unable to map filter or buffer list " "pages\n"); rc = -ENOMEM; diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 3bfbb8df898935f4acf47a52ebb8be3f0f683a67..bde337ee1a34f954e90c583711f155eec87b633e 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -3149,6 +3149,17 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, return NETDEV_TX_OK; } + /* On PCI/PCI-X HW, if packet size is less than ETH_ZLEN, + * packets may get corrupted during padding by HW. + * To WA this issue, pad all small packets manually. + */ + if (skb->len < ETH_ZLEN) { + if (skb_pad(skb, ETH_ZLEN - skb->len)) + return NETDEV_TX_OK; + skb->len = ETH_ZLEN; + skb_set_tail_pointer(skb, ETH_ZLEN); + } + mss = skb_shinfo(skb)->gso_size; /* The controller does a simple calculation to * make sure there is enough room in the FIFO before diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 0b3bade957fd8424f59f16ff6e5e27a7c0b6058e..080c89093feb5df6393c6d8f58421ff254f2b05d 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -999,7 +999,7 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) **/ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) { - u32 ctrl, ctrl_ext, eecd; + u32 ctrl, ctrl_ext, eecd, tctl; s32 ret_val; /* @@ -1014,7 +1014,9 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) ew32(IMC, 0xffffffff); ew32(RCTL, 0); - ew32(TCTL, E1000_TCTL_PSP); + tctl = er32(TCTL); + tctl &= ~E1000_TCTL_EN; + ew32(TCTL, tctl); e1e_flush(); usleep_range(10000, 20000); @@ -1601,10 +1603,8 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) * auto-negotiation in the TXCW register and disable * forced link in the Device Control register in an * attempt to auto-negotiate with our link partner. - * If the partner code word is null, stop forcing - * and restart auto negotiation. */ - if ((rxcw & E1000_RXCW_C) || !(rxcw & E1000_RXCW_CW)) { + if (rxcw & E1000_RXCW_C) { /* Enable autoneg, and unforce link up */ ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index cd153326c3cf8254543b0b544f0dfd8443cd6736..cb3356c9af803509efb2c58ff4f7d0667e689e1c 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -310,6 +310,7 @@ struct e1000_adapter { */ struct e1000_ring *tx_ring /* One per active queue */ ____cacheline_aligned_in_smp; + u32 tx_fifo_limit; struct napi_struct napi; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 95b245310f1761fa4f9b06de319cea48fdc28c92..d01a099475a143a44253b83ef212d8ad1f5935bf 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -178,6 +178,24 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo) pr_info("%-15s %08x %08x\n", rname, regs[0], regs[1]); } +static void e1000e_dump_ps_pages(struct e1000_adapter *adapter, + struct e1000_buffer *bi) +{ + int i; + struct e1000_ps_page *ps_page; + + for (i = 0; i < adapter->rx_ps_pages; i++) { + ps_page = &bi->ps_pages[i]; + + if (ps_page->page) { + pr_info("packet dump for ps_page %d:\n", i); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, + 16, 1, page_address(ps_page->page), + PAGE_SIZE, true); + } + } +} + /* * e1000e_dump - Print registers, Tx-ring and Rx-ring */ @@ -299,10 +317,10 @@ static void e1000e_dump(struct e1000_adapter *adapter) (unsigned long long)buffer_info->time_stamp, buffer_info->skb, next_desc); - if (netif_msg_pktdata(adapter) && buffer_info->dma != 0) + if (netif_msg_pktdata(adapter) && buffer_info->skb) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, - 16, 1, phys_to_virt(buffer_info->dma), - buffer_info->length, true); + 16, 1, buffer_info->skb->data, + buffer_info->skb->len, true); } /* Print Rx Ring Summary */ @@ -381,10 +399,8 @@ static void e1000e_dump(struct e1000_adapter *adapter) buffer_info->skb, next_desc); if (netif_msg_pktdata(adapter)) - print_hex_dump(KERN_INFO, "", - DUMP_PREFIX_ADDRESS, 16, 1, - phys_to_virt(buffer_info->dma), - adapter->rx_ps_bsize0, true); + e1000e_dump_ps_pages(adapter, + buffer_info); } } break; @@ -444,12 +460,12 @@ static void e1000e_dump(struct e1000_adapter *adapter) (unsigned long long)buffer_info->dma, buffer_info->skb, next_desc); - if (netif_msg_pktdata(adapter)) + if (netif_msg_pktdata(adapter) && + buffer_info->skb) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 1, - phys_to_virt - (buffer_info->dma), + buffer_info->skb->data, adapter->rx_buffer_len, true); } @@ -3500,6 +3516,15 @@ void e1000e_reset(struct e1000_adapter *adapter) break; } + /* + * Alignment of Tx data is on an arbitrary byte boundary with the + * maximum size per Tx descriptor limited only to the transmit + * allocation of the packet buffer minus 96 bytes with an upper + * limit of 24KB due to receive synchronization limitations. + */ + adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96, + 24 << 10); + /* * Disable Adaptive Interrupt Moderation if 2 full packets cannot * fit in receive buffer. @@ -4769,12 +4794,9 @@ static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb) return 1; } -#define E1000_MAX_PER_TXD 8192 -#define E1000_MAX_TXD_PWR 12 - static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb, unsigned int first, unsigned int max_per_txd, - unsigned int nr_frags, unsigned int mss) + unsigned int nr_frags) { struct e1000_adapter *adapter = tx_ring->adapter; struct pci_dev *pdev = adapter->pdev; @@ -5007,20 +5029,19 @@ static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) { + BUG_ON(size > tx_ring->count); + if (e1000_desc_unused(tx_ring) >= size) return 0; return __e1000_maybe_stop_tx(tx_ring, size); } -#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1) static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_ring *tx_ring = adapter->tx_ring; unsigned int first; - unsigned int max_per_txd = E1000_MAX_PER_TXD; - unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; unsigned int tx_flags = 0; unsigned int len = skb_headlen(skb); unsigned int nr_frags; @@ -5040,18 +5061,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, } mss = skb_shinfo(skb)->gso_size; - /* - * The controller does a simple calculation to - * make sure there is enough room in the FIFO before - * initiating the DMA for each buffer. The calc is: - * 4 = ceil(buffer len/mss). To make sure we don't - * overrun the FIFO, adjust the max buffer len if mss - * drops. - */ if (mss) { u8 hdr_len; - max_per_txd = min(mss << 2, max_per_txd); - max_txd_pwr = fls(max_per_txd) - 1; /* * TSO Workaround for 82571/2/3 Controllers -- if skb->data @@ -5081,12 +5092,12 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, count++; count++; - count += TXD_USE_COUNT(len, max_txd_pwr); + count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); nr_frags = skb_shinfo(skb)->nr_frags; for (f = 0; f < nr_frags; f++) - count += TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->frags[f]), - max_txd_pwr); + count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]), + adapter->tx_fifo_limit); if (adapter->hw.mac.tx_pkt_filtering) e1000_transfer_dhcp_info(adapter, skb); @@ -5128,15 +5139,18 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, tx_flags |= E1000_TX_FLAGS_NO_FCS; /* if count is 0 then mapping error has occurred */ - count = e1000_tx_map(tx_ring, skb, first, max_per_txd, nr_frags, mss); + count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit, + nr_frags); if (count) { skb_tx_timestamp(skb); netdev_sent_queue(netdev, skb->len); e1000_tx_queue(tx_ring, tx_flags, count); /* Make sure there is space in the ring for the next send. */ - e1000_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 2); - + e1000_maybe_stop_tx(tx_ring, + (MAX_SKB_FRAGS * + DIV_ROUND_UP(PAGE_SIZE, + adapter->tx_fifo_limit) + 2)); } else { dev_kfree_skb_any(skb); tx_ring->buffer_info[first].time_stamp = 0; @@ -6311,8 +6325,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->hw.phy.autoneg_advertised = 0x2f; /* ring size defaults */ - adapter->rx_ring->count = 256; - adapter->tx_ring->count = 256; + adapter->rx_ring->count = E1000_DEFAULT_RXD; + adapter->tx_ring->count = E1000_DEFAULT_TXD; /* * Initial Wake on LAN setting - If APM wake is enabled in diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 5e84eaac48c191727d9ac733c80ffbb13ce1473f..ba994fb4cec69bc60baaff7c9407faf9553d40be 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -254,6 +254,14 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) */ size += NVM_WORD_SIZE_BASE_SHIFT; + /* + * Check for invalid size + */ + if ((hw->mac.type == e1000_82576) && (size > 15)) { + pr_notice("The NVM size is not valid, defaulting to 32K\n"); + size = 15; + } + nvm->word_size = 1 << size; if (hw->mac.type < e1000_i210) { nvm->opcode_bits = 8; @@ -281,14 +289,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) } else nvm->type = e1000_nvm_flash_hw; - /* - * Check for invalid size - */ - if ((hw->mac.type == e1000_82576) && (size > 15)) { - pr_notice("The NVM size is not valid, defaulting to 32K\n"); - size = 15; - } - /* NVM Function Pointers */ switch (hw->mac.type) { case e1000_82580: diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h index 10efcd88dca00c81ef2539914851d25536447c78..28394bea5253fc280e1aba973b20958ed1b9662f 100644 --- a/drivers/net/ethernet/intel/igb/e1000_regs.h +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h @@ -156,8 +156,12 @@ : (0x0E018 + ((_n) * 0x40))) #define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) \ : (0x0E028 + ((_n) * 0x40))) -#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8)) -#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8)) +#define E1000_RXCTL(_n) ((_n) < 4 ? (0x02814 + ((_n) * 0x100)) : \ + (0x0C014 + ((_n) * 0x40))) +#define E1000_DCA_RXCTRL(_n) E1000_RXCTL(_n) +#define E1000_TXCTL(_n) ((_n) < 4 ? (0x03814 + ((_n) * 0x100)) : \ + (0x0E014 + ((_n) * 0x40))) +#define E1000_DCA_TXCTRL(_n) E1000_TXCTL(_n) #define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) \ : (0x0E038 + ((_n) * 0x40))) #define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) \ diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index a19c84cad0e991fc429b846b913f704e9cc41f30..70591117051bf2faa446af5a3b81055f091d491d 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -209,8 +209,8 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) /* When SoL/IDER sessions are active, autoneg/speed/duplex * cannot be changed */ if (igb_check_reset_block(hw)) { - dev_err(&adapter->pdev->dev, "Cannot change link " - "characteristics when SoL/IDER is active.\n"); + dev_err(&adapter->pdev->dev, + "Cannot change link characteristics when SoL/IDER is active.\n"); return -EINVAL; } @@ -1089,8 +1089,8 @@ static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data, wr32(reg, (_test[pat] & write)); val = rd32(reg) & mask; if (val != (_test[pat] & write & mask)) { - dev_err(&adapter->pdev->dev, "pattern test reg %04X " - "failed: got 0x%08X expected 0x%08X\n", + dev_err(&adapter->pdev->dev, + "pattern test reg %04X failed: got 0x%08X expected 0x%08X\n", reg, val, (_test[pat] & write & mask)); *data = reg; return 1; @@ -1108,8 +1108,8 @@ static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data, wr32(reg, write & mask); val = rd32(reg); if ((write & mask) != (val & mask)) { - dev_err(&adapter->pdev->dev, "set/check reg %04X test failed:" - " got 0x%08X expected 0x%08X\n", reg, + dev_err(&adapter->pdev->dev, + "set/check reg %04X test failed: got 0x%08X expected 0x%08X\n", reg, (val & mask), (write & mask)); *data = reg; return 1; @@ -1171,8 +1171,9 @@ static int igb_reg_test(struct igb_adapter *adapter, u64 *data) wr32(E1000_STATUS, toggle); after = rd32(E1000_STATUS) & toggle; if (value != after) { - dev_err(&adapter->pdev->dev, "failed STATUS register test " - "got: 0x%08X expected: 0x%08X\n", after, value); + dev_err(&adapter->pdev->dev, + "failed STATUS register test got: 0x%08X expected: 0x%08X\n", + after, value); *data = 1; return 1; } @@ -1497,6 +1498,9 @@ static int igb_integrated_phy_loopback(struct igb_adapter *adapter) break; } + /* add small delay to avoid loopback test failure */ + msleep(50); + /* force 1000, set loopback */ igb_write_phy_reg(hw, PHY_CONTROL, 0x4140); @@ -1777,16 +1781,14 @@ static int igb_loopback_test(struct igb_adapter *adapter, u64 *data) * sessions are active */ if (igb_check_reset_block(&adapter->hw)) { dev_err(&adapter->pdev->dev, - "Cannot do PHY loopback test " - "when SoL/IDER is active.\n"); + "Cannot do PHY loopback test when SoL/IDER is active.\n"); *data = 0; goto out; } if ((adapter->hw.mac.type == e1000_i210) - || (adapter->hw.mac.type == e1000_i210)) { + || (adapter->hw.mac.type == e1000_i211)) { dev_err(&adapter->pdev->dev, - "Loopback test not supported " - "on this part at this time.\n"); + "Loopback test not supported on this part at this time.\n"); *data = 0; goto out; } diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 1050411e7ca337f8cd28dff367d5cb2e94838ddf..48cc4fb1a307f0d7c2821cc9f57c4c67d0ffc31b 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -462,10 +462,10 @@ static void igb_dump(struct igb_adapter *adapter) (u64)buffer_info->time_stamp, buffer_info->skb, next_desc); - if (netif_msg_pktdata(adapter) && buffer_info->dma != 0) + if (netif_msg_pktdata(adapter) && buffer_info->skb) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, - 16, 1, phys_to_virt(buffer_info->dma), + 16, 1, buffer_info->skb->data, buffer_info->length, true); } } @@ -547,18 +547,17 @@ static void igb_dump(struct igb_adapter *adapter) (u64)buffer_info->dma, buffer_info->skb, next_desc); - if (netif_msg_pktdata(adapter)) { + if (netif_msg_pktdata(adapter) && + buffer_info->dma && buffer_info->skb) { print_hex_dump(KERN_INFO, "", - DUMP_PREFIX_ADDRESS, - 16, 1, - phys_to_virt(buffer_info->dma), - IGB_RX_HDR_LEN, true); + DUMP_PREFIX_ADDRESS, + 16, 1, buffer_info->skb->data, + IGB_RX_HDR_LEN, true); print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 1, - phys_to_virt( - buffer_info->page_dma + - buffer_info->page_offset), + page_address(buffer_info->page) + + buffer_info->page_offset, PAGE_SIZE/2, true); } } @@ -6235,7 +6234,7 @@ static bool igb_alloc_mapped_page(struct igb_ring *rx_ring, return true; if (!page) { - page = alloc_page(GFP_ATOMIC | __GFP_COLD); + page = __skb_alloc_page(GFP_ATOMIC, bi->skb); bi->page = page; if (unlikely(!page)) { rx_ring->rx_stats.alloc_failed++; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 50fc137501da087d9cb73c1c924a0e9f85562c79..18bf08c9d7a4428e3a82f9f29a5837fddc3f6860 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -804,12 +804,13 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { /* Set KX4/KX/KR support according to speed requested */ autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); - if (speed & IXGBE_LINK_SPEED_10GB_FULL) + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { if (orig_autoc & IXGBE_AUTOC_KX4_SUPP) autoc |= IXGBE_AUTOC_KX4_SUPP; if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) && (hw->phy.smart_speed_active == false)) autoc |= IXGBE_AUTOC_KR_SUPP; + } if (speed & IXGBE_LINK_SPEED_1GB_FULL) autoc |= IXGBE_AUTOC_KX_SUPP; } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index c709eae58c630a9a1e2c5e5e7539d733cf609e31..4326f74f7137a333461683f00c8fc1cadfcee4b4 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1141,8 +1141,8 @@ static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring, /* alloc new page for storage */ if (likely(!page)) { - page = alloc_pages(GFP_ATOMIC | __GFP_COLD | __GFP_COMP, - ixgbe_rx_pg_order(rx_ring)); + page = __skb_alloc_pages(GFP_ATOMIC | __GFP_COLD | __GFP_COMP, + bi->skb, ixgbe_rx_pg_order(rx_ring)); if (unlikely(!page)) { rx_ring->rx_stats.alloc_rx_page_failed++; return false; diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 3f9841d619adae00002d3f662f5067f3b6092d63..60ef64587412a6a70af056f93e253f4fe407cce2 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -352,7 +352,6 @@ static void ixgbevf_alloc_rx_buffers(struct ixgbevf_adapter *adapter, adapter->alloc_rx_buff_failed++; goto no_buffers; } - bi->skb = skb; } if (!bi->dma) { diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index f32e703007702ba0652bca4bce23f7ac44287c14..5aba5ecdf1e28157fadf44072c87a4a98511d249 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -614,8 +614,8 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud /* If source MAC is equal to our own MAC and not performing * the selftest or flb disabled - drop the packet */ if (s_mac == priv->mac && - (!(dev->features & NETIF_F_LOOPBACK) || - !priv->validate_loopback)) + !((dev->features & NETIF_F_LOOPBACK) || + priv->validate_loopback)) goto next; /* diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 019d856b1334fc4e7b389eb00d16da872d63ee4a..10bba09c44ea508d047123aeafb5e001b6bbd1be 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -164,7 +164,6 @@ int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv, ring->cons = 0xffffffff; ring->last_nr_txbb = 1; ring->poll_cnt = 0; - ring->blocked = 0; memset(ring->tx_info, 0, ring->size * sizeof(struct mlx4_en_tx_info)); memset(ring->buf, 0, ring->buf_size); @@ -365,14 +364,13 @@ static void mlx4_en_process_tx_cq(struct net_device *dev, struct mlx4_en_cq *cq) ring->cons += txbbs_skipped; netdev_tx_completed_queue(ring->tx_queue, packets, bytes); - /* Wakeup Tx queue if this ring stopped it */ - if (unlikely(ring->blocked)) { - if ((u32) (ring->prod - ring->cons) <= - ring->size - HEADROOM - MAX_DESC_TXBBS) { - ring->blocked = 0; - netif_tx_wake_queue(ring->tx_queue); - priv->port_stats.wake_queue++; - } + /* + * Wakeup Tx queue if this stopped, and at least 1 packet + * was completed + */ + if (netif_tx_queue_stopped(ring->tx_queue) && txbbs_skipped > 0) { + netif_tx_wake_queue(ring->tx_queue); + priv->port_stats.wake_queue++; } } @@ -592,7 +590,6 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) ring->size - HEADROOM - MAX_DESC_TXBBS)) { /* every full Tx ring stops queue */ netif_tx_stop_queue(ring->tx_queue); - ring->blocked = 1; priv->port_stats.queue_stopped++; return NETDEV_TX_BUSY; diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.c b/drivers/net/ethernet/mellanox/mlx4/icm.c index 88b7b3e75ab197706b3a1f0c7fa953e1f5f9da0b..31d02649be41f2317d16f178f88bc1f19153352a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/icm.c +++ b/drivers/net/ethernet/mellanox/mlx4/icm.c @@ -227,9 +227,10 @@ int mlx4_UNMAP_ICM_AUX(struct mlx4_dev *dev) MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE); } -int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj) +int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj) { - int i = (obj & (table->num_obj - 1)) / (MLX4_TABLE_CHUNK_SIZE / table->obj_size); + u32 i = (obj & (table->num_obj - 1)) / + (MLX4_TABLE_CHUNK_SIZE / table->obj_size); int ret = 0; mutex_lock(&table->mutex); @@ -262,16 +263,18 @@ int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj) return ret; } -void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj) +void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj) { - int i; + u32 i; + u64 offset; i = (obj & (table->num_obj - 1)) / (MLX4_TABLE_CHUNK_SIZE / table->obj_size); mutex_lock(&table->mutex); if (--table->icm[i]->refcount == 0) { - mlx4_UNMAP_ICM(dev, table->virt + i * MLX4_TABLE_CHUNK_SIZE, + offset = (u64) i * MLX4_TABLE_CHUNK_SIZE; + mlx4_UNMAP_ICM(dev, table->virt + offset, MLX4_TABLE_CHUNK_SIZE / MLX4_ICM_PAGE_SIZE); mlx4_free_icm(dev, table->icm[i], table->coherent); table->icm[i] = NULL; @@ -280,9 +283,11 @@ void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj) mutex_unlock(&table->mutex); } -void *mlx4_table_find(struct mlx4_icm_table *table, int obj, dma_addr_t *dma_handle) +void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj, + dma_addr_t *dma_handle) { - int idx, offset, dma_offset, i; + int offset, dma_offset, i; + u64 idx; struct mlx4_icm_chunk *chunk; struct mlx4_icm *icm; struct page *page = NULL; @@ -292,7 +297,7 @@ void *mlx4_table_find(struct mlx4_icm_table *table, int obj, dma_addr_t *dma_han mutex_lock(&table->mutex); - idx = (obj & (table->num_obj - 1)) * table->obj_size; + idx = (u64) (obj & (table->num_obj - 1)) * table->obj_size; icm = table->icm[idx / MLX4_TABLE_CHUNK_SIZE]; dma_offset = offset = idx % MLX4_TABLE_CHUNK_SIZE; @@ -326,10 +331,11 @@ void *mlx4_table_find(struct mlx4_icm_table *table, int obj, dma_addr_t *dma_han } int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, - int start, int end) + u32 start, u32 end) { int inc = MLX4_TABLE_CHUNK_SIZE / table->obj_size; - int i, err; + int err; + u32 i; for (i = start; i <= end; i += inc) { err = mlx4_table_get(dev, table, i); @@ -349,22 +355,23 @@ int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, } void mlx4_table_put_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, - int start, int end) + u32 start, u32 end) { - int i; + u32 i; for (i = start; i <= end; i += MLX4_TABLE_CHUNK_SIZE / table->obj_size) mlx4_table_put(dev, table, i); } int mlx4_init_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table, - u64 virt, int obj_size, int nobj, int reserved, + u64 virt, int obj_size, u32 nobj, int reserved, int use_lowmem, int use_coherent) { int obj_per_chunk; int num_icm; unsigned chunk_size; int i; + u64 size; obj_per_chunk = MLX4_TABLE_CHUNK_SIZE / obj_size; num_icm = (nobj + obj_per_chunk - 1) / obj_per_chunk; @@ -380,10 +387,12 @@ int mlx4_init_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table, table->coherent = use_coherent; mutex_init(&table->mutex); + size = (u64) nobj * obj_size; for (i = 0; i * MLX4_TABLE_CHUNK_SIZE < reserved * obj_size; ++i) { chunk_size = MLX4_TABLE_CHUNK_SIZE; - if ((i + 1) * MLX4_TABLE_CHUNK_SIZE > nobj * obj_size) - chunk_size = PAGE_ALIGN(nobj * obj_size - i * MLX4_TABLE_CHUNK_SIZE); + if ((i + 1) * MLX4_TABLE_CHUNK_SIZE > size) + chunk_size = PAGE_ALIGN(size - + i * MLX4_TABLE_CHUNK_SIZE); table->icm[i] = mlx4_alloc_icm(dev, chunk_size >> PAGE_SHIFT, (use_lowmem ? GFP_KERNEL : GFP_HIGHUSER) | diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.h b/drivers/net/ethernet/mellanox/mlx4/icm.h index 19e4efc0b3429adb982b69c5366321385c8d3e05..dee67fa39107f890508e158e56b680af6496d74a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/icm.h +++ b/drivers/net/ethernet/mellanox/mlx4/icm.h @@ -71,17 +71,17 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages, gfp_t gfp_mask, int coherent); void mlx4_free_icm(struct mlx4_dev *dev, struct mlx4_icm *icm, int coherent); -int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj); -void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj); +int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj); +void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj); int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, - int start, int end); + u32 start, u32 end); void mlx4_table_put_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, - int start, int end); + u32 start, u32 end); int mlx4_init_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table, - u64 virt, int obj_size, int nobj, int reserved, + u64 virt, int obj_size, u32 nobj, int reserved, int use_lowmem, int use_coherent); void mlx4_cleanup_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table); -void *mlx4_table_find(struct mlx4_icm_table *table, int obj, dma_addr_t *dma_handle); +void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj, dma_addr_t *dma_handle); static inline void mlx4_icm_first(struct mlx4_icm *icm, struct mlx4_icm_iter *iter) diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 48d0e90194cb19d2a322990425b478f9e178b623..2f816c6aed72da16bc6afc22c957f0b6c7a5eac0 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -157,9 +157,6 @@ int mlx4_check_port_params(struct mlx4_dev *dev, "on this HCA, aborting.\n"); return -EINVAL; } - if (port_type[i] == MLX4_PORT_TYPE_ETH && - port_type[i + 1] == MLX4_PORT_TYPE_IB) - return -EINVAL; } } @@ -1237,13 +1234,13 @@ static int mlx4_init_hca(struct mlx4_dev *dev) mlx4_info(dev, "non-primary physical function, skipping.\n"); else mlx4_err(dev, "QUERY_FW command failed, aborting.\n"); - goto unmap_bf; + return err; } err = mlx4_load_fw(dev); if (err) { mlx4_err(dev, "Failed to start FW, aborting.\n"); - goto unmap_bf; + return err; } mlx4_cfg.log_pg_sz_m = 1; @@ -1307,7 +1304,7 @@ static int mlx4_init_hca(struct mlx4_dev *dev) err = mlx4_init_slave(dev); if (err) { mlx4_err(dev, "Failed to initialize slave\n"); - goto unmap_bf; + return err; } err = mlx4_slave_cap(dev); @@ -1327,7 +1324,7 @@ static int mlx4_init_hca(struct mlx4_dev *dev) err = mlx4_QUERY_ADAPTER(dev, &adapter); if (err) { mlx4_err(dev, "QUERY_ADAPTER command failed, aborting.\n"); - goto err_close; + goto unmap_bf; } priv->eq_table.inta_pin = adapter.inta_pin; @@ -1335,6 +1332,9 @@ static int mlx4_init_hca(struct mlx4_dev *dev) return 0; +unmap_bf: + unmap_bf_area(dev); + err_close: mlx4_close_hca(dev); @@ -1347,8 +1347,6 @@ static int mlx4_init_hca(struct mlx4_dev *dev) mlx4_UNMAP_FA(dev); mlx4_free_icm(dev, priv->fw.fw_icm, 0); } -unmap_bf: - unmap_bf_area(dev); return err; } @@ -1999,7 +1997,8 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) } slave_start: - if (mlx4_cmd_init(dev)) { + err = mlx4_cmd_init(dev); + if (err) { mlx4_err(dev, "Failed to init command interface, aborting.\n"); goto err_sriov; } diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c index 4ec3835e1bc2cb8dd88958ce7a1276150898e86f..e151c21baf2baf5970c9c232c79d0c8650c0eb4e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mcg.c +++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c @@ -137,11 +137,11 @@ static int mlx4_GID_HASH(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox, return err; } -static struct mlx4_promisc_qp *get_promisc_qp(struct mlx4_dev *dev, u8 pf_num, +static struct mlx4_promisc_qp *get_promisc_qp(struct mlx4_dev *dev, u8 port, enum mlx4_steer_type steer, u32 qpn) { - struct mlx4_steer *s_steer = &mlx4_priv(dev)->steer[pf_num]; + struct mlx4_steer *s_steer = &mlx4_priv(dev)->steer[port - 1]; struct mlx4_promisc_qp *pqp; list_for_each_entry(pqp, &s_steer->promisc_qps[steer], list) { @@ -182,7 +182,7 @@ static int new_steering_entry(struct mlx4_dev *dev, u8 port, /* If the given qpn is also a promisc qp, * it should be inserted to duplicates list */ - pqp = get_promisc_qp(dev, 0, steer, qpn); + pqp = get_promisc_qp(dev, port, steer, qpn); if (pqp) { dqp = kmalloc(sizeof *dqp, GFP_KERNEL); if (!dqp) { @@ -256,7 +256,7 @@ static int existing_steering_entry(struct mlx4_dev *dev, u8 port, s_steer = &mlx4_priv(dev)->steer[port - 1]; - pqp = get_promisc_qp(dev, 0, steer, qpn); + pqp = get_promisc_qp(dev, port, steer, qpn); if (!pqp) return 0; /* nothing to do */ @@ -302,7 +302,7 @@ static bool check_duplicate_entry(struct mlx4_dev *dev, u8 port, s_steer = &mlx4_priv(dev)->steer[port - 1]; /* if qp is not promisc, it cannot be duplicated */ - if (!get_promisc_qp(dev, 0, steer, qpn)) + if (!get_promisc_qp(dev, port, steer, qpn)) return false; /* The qp is promisc qp so it is a duplicate on this index @@ -352,7 +352,7 @@ static bool can_remove_steering_entry(struct mlx4_dev *dev, u8 port, members_count = be32_to_cpu(mgm->members_count) & 0xffffff; for (i = 0; i < members_count; i++) { qpn = be32_to_cpu(mgm->qp[i]) & MGM_QPN_MASK; - if (!get_promisc_qp(dev, 0, steer, qpn) && qpn != tqpn) { + if (!get_promisc_qp(dev, port, steer, qpn) && qpn != tqpn) { /* the qp is not promisc, the entry can't be removed */ goto out; } @@ -398,7 +398,7 @@ static int add_promisc_qp(struct mlx4_dev *dev, u8 port, mutex_lock(&priv->mcg_table.mutex); - if (get_promisc_qp(dev, 0, steer, qpn)) { + if (get_promisc_qp(dev, port, steer, qpn)) { err = 0; /* Noting to do, already exists */ goto out_mutex; } @@ -432,8 +432,10 @@ static int add_promisc_qp(struct mlx4_dev *dev, u8 port, if ((be32_to_cpu(mgm->qp[i]) & MGM_QPN_MASK) == qpn) { /* Entry already exists, add to duplicates */ dqp = kmalloc(sizeof *dqp, GFP_KERNEL); - if (!dqp) + if (!dqp) { + err = -ENOMEM; goto out_mailbox; + } dqp->qpn = qpn; list_add_tail(&dqp->list, &entry->duplicates); found = true; @@ -501,7 +503,7 @@ static int remove_promisc_qp(struct mlx4_dev *dev, u8 port, s_steer = &mlx4_priv(dev)->steer[port - 1]; mutex_lock(&priv->mcg_table.mutex); - pqp = get_promisc_qp(dev, 0, steer, qpn); + pqp = get_promisc_qp(dev, port, steer, qpn); if (unlikely(!pqp)) { mlx4_warn(dev, "QP %x is not promiscuous QP\n", qpn); /* nothing to do */ @@ -648,13 +650,6 @@ static int find_entry(struct mlx4_dev *dev, u8 port, return err; } -struct mlx4_net_trans_rule_hw_ctrl { - __be32 ctrl; - __be32 vf_vep_port; - __be32 qpn; - __be32 reserved; -}; - static void trans_rule_ctrl_to_hw(struct mlx4_net_trans_rule *ctrl, struct mlx4_net_trans_rule_hw_ctrl *hw) { @@ -678,87 +673,18 @@ static void trans_rule_ctrl_to_hw(struct mlx4_net_trans_rule *ctrl, hw->qpn = cpu_to_be32(ctrl->qpn); } -struct mlx4_net_trans_rule_hw_ib { - u8 size; - u8 rsvd1; - __be16 id; - u32 rsvd2; - __be32 qpn; - __be32 qpn_mask; - u8 dst_gid[16]; - u8 dst_gid_msk[16]; -} __packed; - -struct mlx4_net_trans_rule_hw_eth { - u8 size; - u8 rsvd; - __be16 id; - u8 rsvd1[6]; - u8 dst_mac[6]; - u16 rsvd2; - u8 dst_mac_msk[6]; - u16 rsvd3; - u8 src_mac[6]; - u16 rsvd4; - u8 src_mac_msk[6]; - u8 rsvd5; - u8 ether_type_enable; - __be16 ether_type; - __be16 vlan_id_msk; - __be16 vlan_id; -} __packed; - -struct mlx4_net_trans_rule_hw_tcp_udp { - u8 size; - u8 rsvd; - __be16 id; - __be16 rsvd1[3]; - __be16 dst_port; - __be16 rsvd2; - __be16 dst_port_msk; - __be16 rsvd3; - __be16 src_port; - __be16 rsvd4; - __be16 src_port_msk; -} __packed; - -struct mlx4_net_trans_rule_hw_ipv4 { - u8 size; - u8 rsvd; - __be16 id; - __be32 rsvd1; - __be32 dst_ip; - __be32 dst_ip_msk; - __be32 src_ip; - __be32 src_ip_msk; -} __packed; - -struct _rule_hw { - union { - struct { - u8 size; - u8 rsvd; - __be16 id; - }; - struct mlx4_net_trans_rule_hw_eth eth; - struct mlx4_net_trans_rule_hw_ib ib; - struct mlx4_net_trans_rule_hw_ipv4 ipv4; - struct mlx4_net_trans_rule_hw_tcp_udp tcp_udp; - }; +const u16 __sw_id_hw[] = { + [MLX4_NET_TRANS_RULE_ID_ETH] = 0xE001, + [MLX4_NET_TRANS_RULE_ID_IB] = 0xE005, + [MLX4_NET_TRANS_RULE_ID_IPV6] = 0xE003, + [MLX4_NET_TRANS_RULE_ID_IPV4] = 0xE002, + [MLX4_NET_TRANS_RULE_ID_TCP] = 0xE004, + [MLX4_NET_TRANS_RULE_ID_UDP] = 0xE006 }; static int parse_trans_rule(struct mlx4_dev *dev, struct mlx4_spec_list *spec, struct _rule_hw *rule_hw) { - static const u16 __sw_id_hw[] = { - [MLX4_NET_TRANS_RULE_ID_ETH] = 0xE001, - [MLX4_NET_TRANS_RULE_ID_IB] = 0xE005, - [MLX4_NET_TRANS_RULE_ID_IPV6] = 0xE003, - [MLX4_NET_TRANS_RULE_ID_IPV4] = 0xE002, - [MLX4_NET_TRANS_RULE_ID_TCP] = 0xE004, - [MLX4_NET_TRANS_RULE_ID_UDP] = 0xE006 - }; - static const size_t __rule_hw_sz[] = { [MLX4_NET_TRANS_RULE_ID_ETH] = sizeof(struct mlx4_net_trans_rule_hw_eth), diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index 59ebc0339638a3c760f8b540d2066a7aaa7fa9cb..dba69d98734a29b9a10038e22eff8e93714147ed 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -249,7 +249,7 @@ struct mlx4_bitmap { struct mlx4_buddy { unsigned long **bits; unsigned int *num_free; - int max_order; + u32 max_order; spinlock_t lock; }; @@ -258,7 +258,7 @@ struct mlx4_icm; struct mlx4_icm_table { u64 virt; int num_icm; - int num_obj; + u32 num_obj; int obj_size; int lowmem; int coherent; @@ -690,6 +690,82 @@ struct mlx4_steer { struct list_head steer_entries[MLX4_NUM_STEERS]; }; +struct mlx4_net_trans_rule_hw_ctrl { + __be32 ctrl; + __be32 vf_vep_port; + __be32 qpn; + __be32 reserved; +}; + +struct mlx4_net_trans_rule_hw_ib { + u8 size; + u8 rsvd1; + __be16 id; + u32 rsvd2; + __be32 qpn; + __be32 qpn_mask; + u8 dst_gid[16]; + u8 dst_gid_msk[16]; +} __packed; + +struct mlx4_net_trans_rule_hw_eth { + u8 size; + u8 rsvd; + __be16 id; + u8 rsvd1[6]; + u8 dst_mac[6]; + u16 rsvd2; + u8 dst_mac_msk[6]; + u16 rsvd3; + u8 src_mac[6]; + u16 rsvd4; + u8 src_mac_msk[6]; + u8 rsvd5; + u8 ether_type_enable; + __be16 ether_type; + __be16 vlan_id_msk; + __be16 vlan_id; +} __packed; + +struct mlx4_net_trans_rule_hw_tcp_udp { + u8 size; + u8 rsvd; + __be16 id; + __be16 rsvd1[3]; + __be16 dst_port; + __be16 rsvd2; + __be16 dst_port_msk; + __be16 rsvd3; + __be16 src_port; + __be16 rsvd4; + __be16 src_port_msk; +} __packed; + +struct mlx4_net_trans_rule_hw_ipv4 { + u8 size; + u8 rsvd; + __be16 id; + __be32 rsvd1; + __be32 dst_ip; + __be32 dst_ip_msk; + __be32 src_ip; + __be32 src_ip_msk; +} __packed; + +struct _rule_hw { + union { + struct { + u8 size; + u8 rsvd; + __be16 id; + }; + struct mlx4_net_trans_rule_hw_eth eth; + struct mlx4_net_trans_rule_hw_ib ib; + struct mlx4_net_trans_rule_hw_ipv4 ipv4; + struct mlx4_net_trans_rule_hw_tcp_udp tcp_udp; + }; +}; + struct mlx4_priv { struct mlx4_dev dev; diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 5f1ab105debc28b4b8ba7bdaca3f0bcb2f1cdb66..9d27e42264e2b64aea3827d760c409ab3de0c301 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -248,7 +248,6 @@ struct mlx4_en_tx_ring { u32 doorbell_qpn; void *buf; u16 poll_cnt; - int blocked; struct mlx4_en_tx_info *tx_info; u8 *bounce_buf; u32 last_nr_txbb; diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c index af55b7ce53413cc27273b9102e609c0ae97d6169..c202d3ad2a0efbb6a852b18874414ba1036a1129 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mr.c +++ b/drivers/net/ethernet/mellanox/mlx4/mr.c @@ -37,6 +37,7 @@ #include #include #include +#include #include @@ -120,7 +121,7 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order) buddy->max_order = max_order; spin_lock_init(&buddy->lock); - buddy->bits = kzalloc((buddy->max_order + 1) * sizeof (long *), + buddy->bits = kcalloc(buddy->max_order + 1, sizeof (long *), GFP_KERNEL); buddy->num_free = kcalloc((buddy->max_order + 1), sizeof *buddy->num_free, GFP_KERNEL); @@ -129,10 +130,12 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order) for (i = 0; i <= buddy->max_order; ++i) { s = BITS_TO_LONGS(1 << (buddy->max_order - i)); - buddy->bits[i] = kmalloc(s * sizeof (long), GFP_KERNEL); - if (!buddy->bits[i]) - goto err_out_free; - bitmap_zero(buddy->bits[i], 1 << (buddy->max_order - i)); + buddy->bits[i] = kcalloc(s, sizeof (long), GFP_KERNEL | __GFP_NOWARN); + if (!buddy->bits[i]) { + buddy->bits[i] = vzalloc(s * sizeof(long)); + if (!buddy->bits[i]) + goto err_out_free; + } } set_bit(0, buddy->bits[buddy->max_order]); @@ -142,7 +145,10 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order) err_out_free: for (i = 0; i <= buddy->max_order; ++i) - kfree(buddy->bits[i]); + if (buddy->bits[i] && is_vmalloc_addr(buddy->bits[i])) + vfree(buddy->bits[i]); + else + kfree(buddy->bits[i]); err_out: kfree(buddy->bits); @@ -156,7 +162,10 @@ static void mlx4_buddy_cleanup(struct mlx4_buddy *buddy) int i; for (i = 0; i <= buddy->max_order; ++i) - kfree(buddy->bits[i]); + if (is_vmalloc_addr(buddy->bits[i])) + vfree(buddy->bits[i]); + else + kfree(buddy->bits[i]); kfree(buddy->bits); kfree(buddy->num_free); @@ -668,7 +677,7 @@ int mlx4_init_mr_table(struct mlx4_dev *dev) return err; err = mlx4_buddy_init(&mr_table->mtt_buddy, - ilog2(dev->caps.num_mtts / + ilog2((u32)dev->caps.num_mtts / (1 << log_mtts_per_seg))); if (err) goto err_buddy; @@ -678,7 +687,7 @@ int mlx4_init_mr_table(struct mlx4_dev *dev) mlx4_alloc_mtt_range(dev, fls(dev->caps.reserved_mtts - 1)); if (priv->reserved_mtts < 0) { - mlx4_warn(dev, "MTT table of order %d is too small.\n", + mlx4_warn(dev, "MTT table of order %u is too small.\n", mr_table->mtt_buddy.max_order); err = -ENOMEM; goto err_reserve_mtts; diff --git a/drivers/net/ethernet/mellanox/mlx4/profile.c b/drivers/net/ethernet/mellanox/mlx4/profile.c index 9ee4725363d5d25d88135d2bbffb4d67a67023ab..8e0c3cc2a1ec786739de7298fc450c483d8fe37a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/profile.c +++ b/drivers/net/ethernet/mellanox/mlx4/profile.c @@ -76,7 +76,7 @@ u64 mlx4_make_profile(struct mlx4_dev *dev, u64 size; u64 start; int type; - int num; + u32 num; int log_num; }; @@ -105,7 +105,7 @@ u64 mlx4_make_profile(struct mlx4_dev *dev, si_meminfo(&si); request->num_mtt = roundup_pow_of_two(max_t(unsigned, request->num_mtt, - min(1UL << 31, + min(1UL << (31 - log_mtts_per_seg), si.totalram >> (log_mtts_per_seg - 1)))); profile[MLX4_RES_QP].size = dev_cap->qpc_entry_sz; diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 94ceddd17ab28a3ea13a15ea4c7ec1211042278f..293c9e820c49b5d470dce7eda95f2252b94d4251 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -42,6 +42,7 @@ #include #include #include +#include #include "mlx4.h" #include "fw.h" @@ -2776,18 +2777,133 @@ int mlx4_QP_ATTACH_wrapper(struct mlx4_dev *dev, int slave, return err; } +/* + * MAC validation for Flow Steering rules. + * VF can attach rules only with a mac address which is assigned to it. + */ +static int validate_eth_header_mac(int slave, struct _rule_hw *eth_header, + struct list_head *rlist) +{ + struct mac_res *res, *tmp; + __be64 be_mac; + + /* make sure it isn't multicast or broadcast mac*/ + if (!is_multicast_ether_addr(eth_header->eth.dst_mac) && + !is_broadcast_ether_addr(eth_header->eth.dst_mac)) { + list_for_each_entry_safe(res, tmp, rlist, list) { + be_mac = cpu_to_be64(res->mac << 16); + if (!memcmp(&be_mac, eth_header->eth.dst_mac, ETH_ALEN)) + return 0; + } + pr_err("MAC %pM doesn't belong to VF %d, Steering rule rejected\n", + eth_header->eth.dst_mac, slave); + return -EINVAL; + } + return 0; +} + +/* + * In case of missing eth header, append eth header with a MAC address + * assigned to the VF. + */ +static int add_eth_header(struct mlx4_dev *dev, int slave, + struct mlx4_cmd_mailbox *inbox, + struct list_head *rlist, int header_id) +{ + struct mac_res *res, *tmp; + u8 port; + struct mlx4_net_trans_rule_hw_ctrl *ctrl; + struct mlx4_net_trans_rule_hw_eth *eth_header; + struct mlx4_net_trans_rule_hw_ipv4 *ip_header; + struct mlx4_net_trans_rule_hw_tcp_udp *l4_header; + __be64 be_mac = 0; + __be64 mac_msk = cpu_to_be64(MLX4_MAC_MASK << 16); + + ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf; + port = be32_to_cpu(ctrl->vf_vep_port) & 0xff; + eth_header = (struct mlx4_net_trans_rule_hw_eth *)(ctrl + 1); + + /* Clear a space in the inbox for eth header */ + switch (header_id) { + case MLX4_NET_TRANS_RULE_ID_IPV4: + ip_header = + (struct mlx4_net_trans_rule_hw_ipv4 *)(eth_header + 1); + memmove(ip_header, eth_header, + sizeof(*ip_header) + sizeof(*l4_header)); + break; + case MLX4_NET_TRANS_RULE_ID_TCP: + case MLX4_NET_TRANS_RULE_ID_UDP: + l4_header = (struct mlx4_net_trans_rule_hw_tcp_udp *) + (eth_header + 1); + memmove(l4_header, eth_header, sizeof(*l4_header)); + break; + default: + return -EINVAL; + } + list_for_each_entry_safe(res, tmp, rlist, list) { + if (port == res->port) { + be_mac = cpu_to_be64(res->mac << 16); + break; + } + } + if (!be_mac) { + pr_err("Failed adding eth header to FS rule, Can't find matching MAC for port %d .\n", + port); + return -EINVAL; + } + + memset(eth_header, 0, sizeof(*eth_header)); + eth_header->size = sizeof(*eth_header) >> 2; + eth_header->id = cpu_to_be16(__sw_id_hw[MLX4_NET_TRANS_RULE_ID_ETH]); + memcpy(eth_header->dst_mac, &be_mac, ETH_ALEN); + memcpy(eth_header->dst_mac_msk, &mac_msk, ETH_ALEN); + + return 0; + +} + int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_vhcr *vhcr, struct mlx4_cmd_mailbox *inbox, struct mlx4_cmd_mailbox *outbox, struct mlx4_cmd_info *cmd) { + + struct mlx4_priv *priv = mlx4_priv(dev); + struct mlx4_resource_tracker *tracker = &priv->mfunc.master.res_tracker; + struct list_head *rlist = &tracker->slave_list[slave].res_list[RES_MAC]; int err; + struct mlx4_net_trans_rule_hw_ctrl *ctrl; + struct _rule_hw *rule_header; + int header_id; if (dev->caps.steering_mode != MLX4_STEERING_MODE_DEVICE_MANAGED) return -EOPNOTSUPP; + ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf; + rule_header = (struct _rule_hw *)(ctrl + 1); + header_id = map_hw_to_sw_id(be16_to_cpu(rule_header->id)); + + switch (header_id) { + case MLX4_NET_TRANS_RULE_ID_ETH: + if (validate_eth_header_mac(slave, rule_header, rlist)) + return -EINVAL; + break; + case MLX4_NET_TRANS_RULE_ID_IPV4: + case MLX4_NET_TRANS_RULE_ID_TCP: + case MLX4_NET_TRANS_RULE_ID_UDP: + pr_warn("Can't attach FS rule without L2 headers, adding L2 header.\n"); + if (add_eth_header(dev, slave, inbox, rlist, header_id)) + return -EINVAL; + vhcr->in_modifier += + sizeof(struct mlx4_net_trans_rule_hw_eth) >> 2; + break; + default: + pr_err("Corrupted mailbox.\n"); + return -EINVAL; + } + err = mlx4_cmd_imm(dev, inbox->dma, &vhcr->out_param, vhcr->in_modifier, 0, MLX4_QP_FLOW_STEERING_ATTACH, MLX4_CMD_TIME_CLASS_A, diff --git a/drivers/net/ethernet/mellanox/mlx4/sense.c b/drivers/net/ethernet/mellanox/mlx4/sense.c index 802498293528307b5c2e123eae089f84929759ea..34ee09bae36e98dcb28c8ff9b4c8d12a2da97292 100644 --- a/drivers/net/ethernet/mellanox/mlx4/sense.c +++ b/drivers/net/ethernet/mellanox/mlx4/sense.c @@ -80,20 +80,6 @@ void mlx4_do_sense_ports(struct mlx4_dev *dev, stype[i - 1] = defaults[i - 1]; } - /* - * Adjust port configuration: - * If port 1 sensed nothing and port 2 is IB, set both as IB - * If port 2 sensed nothing and port 1 is Eth, set both as Eth - */ - if (stype[0] == MLX4_PORT_TYPE_ETH) { - for (i = 1; i < dev->caps.num_ports; i++) - stype[i] = stype[i] ? stype[i] : MLX4_PORT_TYPE_ETH; - } - if (stype[dev->caps.num_ports - 1] == MLX4_PORT_TYPE_IB) { - for (i = 0; i < dev->caps.num_ports - 1; i++) - stype[i] = stype[i] ? stype[i] : MLX4_PORT_TYPE_IB; - } - /* * If sensed nothing, remain in current configuration. */ diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 4069edab229e9a53cfc3bdec5256cf4cdbc573ae..53743f7a2ca9604d6f264de3a2e3c727556a0619 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -346,28 +346,15 @@ static phy_interface_t lpc_phy_interface_mode(struct device *dev) "phy-mode", NULL); if (mode && !strcmp(mode, "mii")) return PHY_INTERFACE_MODE_MII; - return PHY_INTERFACE_MODE_RMII; } - - /* non-DT */ -#ifdef CONFIG_ARCH_LPC32XX_MII_SUPPORT - return PHY_INTERFACE_MODE_MII; -#else return PHY_INTERFACE_MODE_RMII; -#endif } static bool use_iram_for_net(struct device *dev) { if (dev && dev->of_node) return of_property_read_bool(dev->of_node, "use-iram"); - - /* non-DT */ -#ifdef CONFIG_ARCH_LPC32XX_IRAM_FOR_NET - return true; -#else return false; -#endif } /* Receive Status information word */ diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c index c42bbb16cdaebdeb7147dc887705abcfe91e86e0..a688a2ddcfd612866edbce5f8ee08b7f92fbd8e0 100644 --- a/drivers/net/ethernet/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/octeon/octeon_mgmt.c @@ -722,10 +722,8 @@ static int octeon_mgmt_init_phy(struct net_device *netdev) octeon_mgmt_adjust_link, 0, PHY_INTERFACE_MODE_MII); - if (IS_ERR(p->phydev)) { - p->phydev = NULL; + if (!p->phydev) return -1; - } phy_start_aneg(p->phydev); diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c index e559dfa06d6ace1c349cf48efe33738ef642e778..6fa74d530e44d390ce87946b8327a476e5a728e5 100644 --- a/drivers/net/ethernet/pasemi/pasemi_mac.c +++ b/drivers/net/ethernet/pasemi/pasemi_mac.c @@ -1101,9 +1101,9 @@ static int pasemi_mac_phy_init(struct net_device *dev) phydev = of_phy_connect(dev, phy_dn, &pasemi_adjust_link, 0, PHY_INTERFACE_MODE_SGMII); - if (IS_ERR(phydev)) { + if (!phydev) { printk(KERN_ERR "%s: Could not attach to phy\n", dev->name); - return PTR_ERR(phydev); + return -ENODEV; } mac->phydev = phydev; diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c index 342b3a79bd0fd7a6a6bde8860446c20c78595ef2..a77c558d8f4078e7cc4747a5308dc315e34d99c1 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c @@ -1378,6 +1378,10 @@ static void netxen_mask_aer_correctable(struct netxen_adapter *adapter) struct pci_dev *root = pdev->bus->self; u32 aer_pos; + /* root bus? */ + if (!root) + return; + if (adapter->ahw.board_type != NETXEN_BRDTYPE_P3_4_GB_MM && adapter->ahw.board_type != NETXEN_BRDTYPE_P3_10G_TP) return; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index b8ead696141efbaf452f3a46c23dfba1f199f2fb..2a179d087207e4375afb0d66f712043a10417786 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -15,7 +15,7 @@ qlcnic_poll_rsp(struct qlcnic_adapter *adapter) do { /* give atleast 1ms for firmware to respond */ - msleep(1); + mdelay(1); if (++timeout > QLCNIC_OS_CRB_RETRY_COUNT) return QLCNIC_CDRP_RSP_TIMEOUT; @@ -601,7 +601,7 @@ void qlcnic_fw_destroy_ctx(struct qlcnic_adapter *adapter) qlcnic_fw_cmd_destroy_tx_ctx(adapter); /* Allow dma queues to drain after context reset */ - msleep(20); + mdelay(20); } } diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig index 46df3a04030c20af3a3288d7a27423b095694dfc..24c2305d7948455ca52ada710893599067533104 100644 --- a/drivers/net/ethernet/renesas/Kconfig +++ b/drivers/net/ethernet/renesas/Kconfig @@ -8,7 +8,7 @@ config SH_ETH (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \ CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \ CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7734 || \ - CPU_SUBTYPE_SH7757 || ARCH_R8A7740) + CPU_SUBTYPE_SH7757 || ARCH_R8A7740 || ARCH_R8A7779) select CRC32 select NET_CORE select MII @@ -18,4 +18,4 @@ config SH_ETH Renesas SuperH Ethernet device driver. This driver supporting CPUs are: - SH7619, SH7710, SH7712, SH7724, SH7734, SH7763, SH7757, - and R8A7740. + R8A7740 and R8A7779. diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index af0b867a6cf6247ccf4f002af29d5832c03f368b..bad8f2eec9b46f652298a3d9f0b48edbef1ac6b8 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -78,7 +78,7 @@ static void sh_eth_select_mii(struct net_device *ndev) #endif /* There is CPU dependent code */ -#if defined(CONFIG_CPU_SUBTYPE_SH7724) +#if defined(CONFIG_CPU_SUBTYPE_SH7724) || defined(CONFIG_ARCH_R8A7779) #define SH_ETH_RESET_DEFAULT 1 static void sh_eth_set_duplex(struct net_device *ndev) { @@ -93,13 +93,18 @@ static void sh_eth_set_duplex(struct net_device *ndev) static void sh_eth_set_rate(struct net_device *ndev) { struct sh_eth_private *mdp = netdev_priv(ndev); + unsigned int bits = ECMR_RTM; + +#if defined(CONFIG_ARCH_R8A7779) + bits |= ECMR_ELB; +#endif switch (mdp->speed) { case 10: /* 10BASE */ - sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~ECMR_RTM, ECMR); + sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~bits, ECMR); break; case 100:/* 100BASE */ - sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | ECMR_RTM, ECMR); + sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | bits, ECMR); break; default: break; diff --git a/drivers/net/ethernet/seeq/sgiseeq.c b/drivers/net/ethernet/seeq/sgiseeq.c index bb8c8222122b920511f729463a04b97395724c7d..4d15bf413bdc89f060964c8114d4486be337ce46 100644 --- a/drivers/net/ethernet/seeq/sgiseeq.c +++ b/drivers/net/ethernet/seeq/sgiseeq.c @@ -751,6 +751,7 @@ static int __devinit sgiseeq_probe(struct platform_device *pdev) sp->srings = sr; sp->rx_desc = sp->srings->rxvector; sp->tx_desc = sp->srings->txvector; + spin_lock_init(&sp->tx_lock); /* A couple calculations now, saves many cycles later. */ setup_rx_ring(dev, sp->rx_desc, SEEQ_RX_BUFFERS); diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 70554a1b2b02dd37440db75ba06ec9eed8c84fe9..65a8d49106a4c63c6a7faf04c8e3334421ce6472 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -1503,6 +1503,11 @@ static int efx_probe_all(struct efx_nic *efx) goto fail2; } + BUILD_BUG_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_RXQ_MIN_ENT); + if (WARN_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_TXQ_MIN_ENT(efx))) { + rc = -EINVAL; + goto fail3; + } efx->rxq_entries = efx->txq_entries = EFX_DEFAULT_DMAQ_SIZE; rc = efx_probe_filters(efx); @@ -2070,6 +2075,7 @@ static int efx_register_netdev(struct efx_nic *efx) net_dev->irq = efx->pci_dev->irq; net_dev->netdev_ops = &efx_netdev_ops; SET_ETHTOOL_OPS(net_dev, &efx_ethtool_ops); + net_dev->gso_max_segs = EFX_TSO_MAX_SEGS; rtnl_lock(); diff --git a/drivers/net/ethernet/sfc/efx.h b/drivers/net/ethernet/sfc/efx.h index be8f9158a7149388b5e4edfeb41ee2c848319a28..70755c97251aaab4e9cafe969b0a8b95821a1cbb 100644 --- a/drivers/net/ethernet/sfc/efx.h +++ b/drivers/net/ethernet/sfc/efx.h @@ -30,6 +30,7 @@ extern netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb); extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index); extern int efx_setup_tc(struct net_device *net_dev, u8 num_tc); +extern unsigned int efx_tx_max_skb_descs(struct efx_nic *efx); /* RX */ extern int efx_probe_rx_queue(struct efx_rx_queue *rx_queue); @@ -52,10 +53,15 @@ extern void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue); #define EFX_MAX_EVQ_SIZE 16384UL #define EFX_MIN_EVQ_SIZE 512UL -/* The smallest [rt]xq_entries that the driver supports. Callers of - * efx_wake_queue() assume that they can subsequently send at least one - * skb. Falcon/A1 may require up to three descriptors per skb_frag. */ -#define EFX_MIN_RING_SIZE (roundup_pow_of_two(2 * 3 * MAX_SKB_FRAGS)) +/* Maximum number of TCP segments we support for soft-TSO */ +#define EFX_TSO_MAX_SEGS 100 + +/* The smallest [rt]xq_entries that the driver supports. RX minimum + * is a bit arbitrary. For TX, we must have space for at least 2 + * TSO skbs. + */ +#define EFX_RXQ_MIN_ENT 128U +#define EFX_TXQ_MIN_ENT(efx) (2 * efx_tx_max_skb_descs(efx)) /* Filters */ extern int efx_probe_filters(struct efx_nic *efx); diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c index 10536f93b5611d15a22a56b3ca280e0f107ea828..5faedd855b779272342b37c6d992a1a93562a70b 100644 --- a/drivers/net/ethernet/sfc/ethtool.c +++ b/drivers/net/ethernet/sfc/ethtool.c @@ -680,21 +680,27 @@ static int efx_ethtool_set_ringparam(struct net_device *net_dev, struct ethtool_ringparam *ring) { struct efx_nic *efx = netdev_priv(net_dev); + u32 txq_entries; if (ring->rx_mini_pending || ring->rx_jumbo_pending || ring->rx_pending > EFX_MAX_DMAQ_SIZE || ring->tx_pending > EFX_MAX_DMAQ_SIZE) return -EINVAL; - if (ring->rx_pending < EFX_MIN_RING_SIZE || - ring->tx_pending < EFX_MIN_RING_SIZE) { + if (ring->rx_pending < EFX_RXQ_MIN_ENT) { netif_err(efx, drv, efx->net_dev, - "TX and RX queues cannot be smaller than %ld\n", - EFX_MIN_RING_SIZE); + "RX queues cannot be smaller than %u\n", + EFX_RXQ_MIN_ENT); return -EINVAL; } - return efx_realloc_channels(efx, ring->rx_pending, ring->tx_pending); + txq_entries = max(ring->tx_pending, EFX_TXQ_MIN_ENT(efx)); + if (txq_entries != ring->tx_pending) + netif_warn(efx, drv, efx->net_dev, + "increasing TX queue size to minimum of %u\n", + txq_entries); + + return efx_realloc_channels(efx, ring->rx_pending, txq_entries); } static int efx_ethtool_set_pauseparam(struct net_device *net_dev, @@ -857,8 +863,8 @@ static int efx_ethtool_get_class_rule(struct efx_nic *efx, &ip_entry->ip4dst, &ip_entry->pdst); if (rc != 0) { rc = efx_filter_get_ipv4_full( - &spec, &proto, &ip_entry->ip4src, &ip_entry->psrc, - &ip_entry->ip4dst, &ip_entry->pdst); + &spec, &proto, &ip_entry->ip4dst, &ip_entry->pdst, + &ip_entry->ip4src, &ip_entry->psrc); EFX_WARN_ON_PARANOID(rc); ip_mask->ip4src = ~0; ip_mask->psrc = ~0; diff --git a/drivers/net/ethernet/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c index 9b225a7769f765a1f1bf3ef024ae3b73a18a66c2..18713436b44345a110ed263d54c5411d1e93c6fa 100644 --- a/drivers/net/ethernet/sfc/tx.c +++ b/drivers/net/ethernet/sfc/tx.c @@ -119,6 +119,25 @@ efx_max_tx_len(struct efx_nic *efx, dma_addr_t dma_addr) return len; } +unsigned int efx_tx_max_skb_descs(struct efx_nic *efx) +{ + /* Header and payload descriptor for each output segment, plus + * one for every input fragment boundary within a segment + */ + unsigned int max_descs = EFX_TSO_MAX_SEGS * 2 + MAX_SKB_FRAGS; + + /* Possibly one more per segment for the alignment workaround */ + if (EFX_WORKAROUND_5391(efx)) + max_descs += EFX_TSO_MAX_SEGS; + + /* Possibly more for PCIe page boundaries within input fragments */ + if (PAGE_SIZE > EFX_PAGE_SIZE) + max_descs += max_t(unsigned int, MAX_SKB_FRAGS, + DIV_ROUND_UP(GSO_MAX_SIZE, EFX_PAGE_SIZE)); + + return max_descs; +} + /* * Add a socket buffer to a TX queue * diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index e2d083228f3a6b6b6039ab3276182d3adbc72869..719be3912aa9ca5cb7b0a527811df460c257561b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __COMMON_H__ +#define __COMMON_H__ + #include #include #include @@ -366,3 +369,5 @@ extern void stmmac_set_mac(void __iomem *ioaddr, bool enable); extern void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr); extern const struct stmmac_ring_mode_ops ring_mode_ops; + +#endif /* __COMMON_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/descs.h b/drivers/net/ethernet/stmicro/stmmac/descs.h index 9820ec842cc01f8a7fb0897d993d0b873902dee8..223adf95fd0374e465447adc52d854491721fe4f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs.h @@ -20,6 +20,10 @@ Author: Giuseppe Cavallaro *******************************************************************************/ + +#ifndef __DESCS_H__ +#define __DESCS_H__ + struct dma_desc { /* Receive descriptor */ union { @@ -166,3 +170,5 @@ enum tdes_csum_insertion { * is not calculated */ cic_full = 3, /* IP header and pseudoheader */ }; + +#endif /* __DESCS_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h index dd8d6e19dff6b2c1182dfb0f31ca8c4696c84931..7ee9499a6e385a77b9b2110b9578750e767745ab 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h @@ -27,6 +27,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __DESC_COM_H__ +#define __DESC_COM_H__ + #if defined(CONFIG_STMMAC_RING) static inline void ehn_desc_rx_set_on_ring_chain(struct dma_desc *p, int end) { @@ -124,3 +127,5 @@ static inline void norm_set_tx_desc_len(struct dma_desc *p, int len) p->des01.tx.buffer1_size = len; } #endif + +#endif /* __DESC_COM_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h index 7c6d857a9cc7f0c357bb7b1d0cb9d417ecbc25a5..2ec6aeae349e5f7dd3b4e873d1366037a943cb27 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __DWMAC100_H__ +#define __DWMAC100_H__ + #include #include "common.h" @@ -119,3 +122,5 @@ enum ttc_control { #define DMA_MISSED_FRAME_M_CNTR 0x0000ffff /* Missed Frame Couinter */ extern const struct stmmac_dma_ops dwmac100_dma_ops; + +#endif /* __DWMAC100_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h index f90fcb5f957351b742df584104eade1df609bb8b..0e4cacedc1f0e0cf44fad3bb84c5bac000f8e6ee 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h @@ -19,6 +19,8 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __DWMAC1000_H__ +#define __DWMAC1000_H__ #include #include "common.h" @@ -229,6 +231,7 @@ enum rtc_control { #define GMAC_MMC_RX_CSUM_OFFLOAD 0x208 /* Synopsys Core versions */ -#define DWMAC_CORE_3_40 34 +#define DWMAC_CORE_3_40 0x34 extern const struct stmmac_dma_ops dwmac1000_dma_ops; +#endif /* __DWMAC1000_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h index e678ce39d0146b707c012bb7bbd40a58361855c2..e49c9a0fd6ffe9a8ad52f19134e2e8c1aa7dcd2e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __DWMAC_DMA_H__ +#define __DWMAC_DMA_H__ + /* DMA CRS Control and Status Register Mapping */ #define DMA_BUS_MODE 0x00001000 /* Bus Mode */ #define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */ @@ -109,3 +112,5 @@ extern void dwmac_dma_start_rx(void __iomem *ioaddr); extern void dwmac_dma_stop_rx(void __iomem *ioaddr); extern int dwmac_dma_interrupt(void __iomem *ioaddr, struct stmmac_extra_stats *x); + +#endif /* __DWMAC_DMA_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc.h b/drivers/net/ethernet/stmicro/stmmac/mmc.h index a38352024cb8fec7897fc4a990972658efb35dfb..67995ef252515f53c6796ecf77bbe66460223944 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc.h +++ b/drivers/net/ethernet/stmicro/stmmac/mmc.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __MMC_H__ +#define __MMC_H__ + /* MMC control register */ /* When set, all counter are reset */ #define MMC_CNTRL_COUNTER_RESET 0x1 @@ -129,3 +132,5 @@ struct stmmac_counters { extern void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode); extern void dwmac_mmc_intr_all_mask(void __iomem *ioaddr); extern void dwmac_mmc_read(void __iomem *ioaddr, struct stmmac_counters *mmc); + +#endif /* __MMC_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c index c07cfe989f6ef35716c59d3b5e29cdeefa4f1f2a..0c74a702d4610597da59200be253306c7b4db534 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c @@ -33,7 +33,7 @@ #define MMC_TX_INTR 0x00000108 /* MMC TX Interrupt */ #define MMC_RX_INTR_MASK 0x0000010c /* MMC Interrupt Mask */ #define MMC_TX_INTR_MASK 0x00000110 /* MMC Interrupt Mask */ -#define MMC_DEFAUL_MASK 0xffffffff +#define MMC_DEFAULT_MASK 0xffffffff /* MMC TX counter registers */ @@ -147,8 +147,8 @@ void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode) /* To mask all all interrupts.*/ void dwmac_mmc_intr_all_mask(void __iomem *ioaddr) { - writel(MMC_DEFAUL_MASK, ioaddr + MMC_RX_INTR_MASK); - writel(MMC_DEFAUL_MASK, ioaddr + MMC_TX_INTR_MASK); + writel(MMC_DEFAULT_MASK, ioaddr + MMC_RX_INTR_MASK); + writel(MMC_DEFAULT_MASK, ioaddr + MMC_TX_INTR_MASK); } /* This reads the MAC core counters (if actaully supported). diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index f2d3665430ad455b82552d975d9f91066a5fc913..e872e1da3137cef68265e845188bb8544acb988e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -20,6 +20,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __STMMAC_H__ +#define __STMMAC_H__ + #define STMMAC_RESOURCE_NAME "stmmaceth" #define DRV_MODULE_VERSION "March_2012" @@ -166,3 +169,5 @@ static inline void stmmac_unregister_pci(void) { } #endif /* CONFIG_STMMAC_PCI */ + +#endif /* __STMMAC_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index fd8882f9602afc43b6fe6ecd79a14defb5ac8dbe..3be88331d17ab0e690b71f06b2ac30f50d7a7f77 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1066,7 +1066,7 @@ static int stmmac_open(struct net_device *dev) } else priv->tm->enable = 1; #endif - clk_enable(priv->stmmac_clk); + clk_prepare_enable(priv->stmmac_clk); stmmac_check_ether_addr(priv); @@ -1188,7 +1188,7 @@ static int stmmac_open(struct net_device *dev) if (priv->phydev) phy_disconnect(priv->phydev); - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); return ret; } @@ -1246,7 +1246,7 @@ static int stmmac_release(struct net_device *dev) #ifdef CONFIG_STMMAC_DEBUG_FS stmmac_exit_fs(); #endif - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); return 0; } @@ -2077,7 +2077,7 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, goto error_netdev_register; } - priv->stmmac_clk = clk_get(priv->device, NULL); + priv->stmmac_clk = clk_get(priv->device, STMMAC_RESOURCE_NAME); if (IS_ERR(priv->stmmac_clk)) { pr_warning("%s: warning: cannot get CSR clock\n", __func__); goto error_clk_get; @@ -2178,7 +2178,7 @@ int stmmac_suspend(struct net_device *ndev) else { stmmac_set_mac(priv->ioaddr, false); /* Disable clock in case of PWM is off */ - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); } spin_unlock_irqrestore(&priv->lock, flags); return 0; @@ -2203,7 +2203,7 @@ int stmmac_resume(struct net_device *ndev) priv->hw->mac->pmt(priv->ioaddr, 0); else /* enable the clk prevously disabled */ - clk_enable(priv->stmmac_clk); + clk_prepare_enable(priv->stmmac_clk); netif_device_attach(ndev); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index cd01ee7ecef19339c90765747a57b2d621765806..b93245c11995bc15329321e6879be78d4c1b44dc 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -74,7 +74,7 @@ static int __devinit stmmac_probe_config_dt(struct platform_device *pdev, * the necessary resources and invokes the main to init * the net device, register the mdio bus etc. */ -static int stmmac_pltfr_probe(struct platform_device *pdev) +static int __devinit stmmac_pltfr_probe(struct platform_device *pdev) { int ret = 0; struct resource *res; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c index 2a0e1abde7e73eeea25c9c457999765b5315a01f..4ccd4e2977b73a0d441f6f0dbb99ea0636c8dae0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c @@ -97,19 +97,19 @@ static struct clk *timer_clock; static void stmmac_tmu_start(unsigned int new_freq) { clk_set_rate(timer_clock, new_freq); - clk_enable(timer_clock); + clk_prepare_enable(timer_clock); } static void stmmac_tmu_stop(void) { - clk_disable(timer_clock); + clk_disable_unprepare(timer_clock); } int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) { timer_clock = clk_get(NULL, TMU_CHANNEL); - if (timer_clock == NULL) + if (IS_ERR(timer_clock)) return -1; if (tmu2_register_user(stmmac_timer_handler, (void *)dev) < 0) { @@ -126,7 +126,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) int stmmac_close_ext_timer(void) { - clk_disable(timer_clock); + clk_disable_unprepare(timer_clock); tmu2_unregister_user(); clk_put(timer_clock); return 0; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h index 6863590d184bcc9c335da8bfb51562eafafc7557..aea9b14cdfbeff126a962e766ca97894284e51b6 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h @@ -21,6 +21,8 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __STMMAC_TIMER_H__ +#define __STMMAC_TIMER_H__ struct stmmac_timer { void (*timer_start) (unsigned int new_freq); @@ -40,3 +42,5 @@ void stmmac_schedule(struct net_device *dev); extern int tmu2_register_user(void *fnt, void *data); extern void tmu2_unregister_user(void); #endif + +#endif /* __STMMAC_TIMER_H__ */ diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index 3b5c4571b55e3c922a4b6e5a94a0a4a8adcb2fce..d15c888e9df8a15b02d104ace349c1926ad81107 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -538,11 +538,12 @@ EXPORT_SYMBOL_GPL(cpdma_chan_create); int cpdma_chan_destroy(struct cpdma_chan *chan) { - struct cpdma_ctlr *ctlr = chan->ctlr; + struct cpdma_ctlr *ctlr; unsigned long flags; if (!chan) return -EINVAL; + ctlr = chan->ctlr; spin_lock_irqsave(&ctlr->lock, flags); if (chan->state != CPDMA_STATE_IDLE) diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index cd7ee204e94a10abaa88b3288dcd2cace5ceca3e..a9ca4a03d31b2fe2adc68818da636edb8d5aeb2b 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -394,8 +394,10 @@ static int __devexit davinci_mdio_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; struct davinci_mdio_data *data = dev_get_drvdata(dev); - if (data->bus) + if (data->bus) { + mdiobus_unregister(data->bus); mdiobus_free(data->bus); + } if (data->clk) clk_put(data->clk); diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c index 482648fcf0b6327bb9c482c1c36880ece1627caa..98934bdf6acffc053fcd317721e8d92cf649ba14 100644 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -1003,6 +1003,7 @@ static int ixp4xx_nway_reset(struct net_device *dev) } int ixp46x_phc_index = -1; +EXPORT_SYMBOL_GPL(ixp46x_phc_index); static int ixp4xx_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info) diff --git a/drivers/net/fddi/skfp/pmf.c b/drivers/net/fddi/skfp/pmf.c index 24d8566cfd8b98cdd50540b09b19c9287757e914..441b4dc79450c1009151692565586c53060e5c83 100644 --- a/drivers/net/fddi/skfp/pmf.c +++ b/drivers/net/fddi/skfp/pmf.c @@ -673,7 +673,7 @@ void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para, sm_pm_get_ls(smc,port_to_mib(smc,port))) ; break ; case SMT_P_REASON : - * (u_long *) to = 0 ; + *(u32 *)to = 0 ; sp_len = 4 ; goto sp_done ; case SMT_P1033 : /* time stamp */ diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 6cee2917eb0276369e6933ebf933c386167fa9a4..4a1a5f58fa73ffd7899429bcaf28062e29f83dc3 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -383,13 +383,6 @@ int netvsc_device_remove(struct hv_device *device) unsigned long flags; net_device = hv_get_drvdata(device); - spin_lock_irqsave(&device->channel->inbound_lock, flags); - net_device->destroy = true; - spin_unlock_irqrestore(&device->channel->inbound_lock, flags); - - /* Wait for all send completions */ - wait_event(net_device->wait_drain, - atomic_read(&net_device->num_outstanding_sends) == 0); netvsc_disconnect_vsp(net_device); diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c index e5d6146937fa0aade2476662ce87084b7337187c..1e88a1095934a6d7b62c84cf1fff0e083f088881 100644 --- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -718,6 +718,9 @@ static void rndis_filter_halt_device(struct rndis_device *dev) { struct rndis_request *request; struct rndis_halt_request *halt; + struct netvsc_device *nvdev = dev->net_dev; + struct hv_device *hdev = nvdev->dev; + ulong flags; /* Attempt to do a rndis device halt */ request = get_rndis_request(dev, RNDIS_MSG_HALT, @@ -735,6 +738,14 @@ static void rndis_filter_halt_device(struct rndis_device *dev) dev->state = RNDIS_DEV_UNINITIALIZED; cleanup: + spin_lock_irqsave(&hdev->channel->inbound_lock, flags); + nvdev->destroy = true; + spin_unlock_irqrestore(&hdev->channel->inbound_lock, flags); + + /* Wait for all send completions */ + wait_event(nvdev->wait_drain, + atomic_read(&nvdev->num_outstanding_sends) == 0); + if (request) put_rndis_request(dev, request); return; diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c index a561ae44a9ac1c982b1d5390a6f288abe0094523..c6a0299aa9f912241e6b544727df47913b01db1d 100644 --- a/drivers/net/irda/bfin_sir.c +++ b/drivers/net/irda/bfin_sir.c @@ -158,7 +158,7 @@ static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed) /* If not add the 'RPOLC', we can't catch the receive interrupt. * It's related with the HW layout and the IR transiver. */ - val |= IREN | RPOLC; + val |= UMOD_IRDA | RPOLC; UART_PUT_GCTL(port, val); return ret; } @@ -432,7 +432,7 @@ static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev bfin_sir_stop_rx(port); val = UART_GET_GCTL(port); - val &= ~(UCEN | IREN | RPOLC); + val &= ~(UCEN | UMOD_MASK | RPOLC); UART_PUT_GCTL(port, val); #ifdef CONFIG_SIR_BFIN_DMA @@ -518,10 +518,10 @@ static void bfin_sir_send_work(struct work_struct *work) * reset all the UART. */ val = UART_GET_GCTL(port); - val &= ~(IREN | RPOLC); + val &= ~(UMOD_MASK | RPOLC); UART_PUT_GCTL(port, val); SSYNC(); - val |= IREN | RPOLC; + val |= UMOD_IRDA | RPOLC; UART_PUT_GCTL(port, val); SSYNC(); /* bfin_sir_set_speed(port, self->speed); */ diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c index 824e2a93fe8a68d0228897828a51a010e9a8306b..5f3aeac3f86df57e297b1559a5bda2b7669145a9 100644 --- a/drivers/net/irda/ks959-sir.c +++ b/drivers/net/irda/ks959-sir.c @@ -542,6 +542,7 @@ static int ks959_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); if (!kingsun->irlap) { + err = -ENOMEM; dev_err(&kingsun->usbdev->dev, "irlap_open failed\n"); goto free_mem; } diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c index 5a278ab83c2f040e3ac0f8427f6744b15e42de26..2d4b6a1ab2029b0d2267cf967931e47c84796123 100644 --- a/drivers/net/irda/ksdazzle-sir.c +++ b/drivers/net/irda/ksdazzle-sir.c @@ -436,6 +436,7 @@ static int ksdazzle_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); if (!kingsun->irlap) { + err = -ENOMEM; dev_err(&kingsun->usbdev->dev, "irlap_open failed\n"); goto free_mem; } diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c index 256eddf1f75a1913576067742f8fc1cb3dce3e7a..795109425568623977428b1a62bffc7d11c6fa14 100644 --- a/drivers/net/irda/sh_sir.c +++ b/drivers/net/irda/sh_sir.c @@ -280,7 +280,7 @@ static int sh_sir_set_baudrate(struct sh_sir_self *self, u32 baudrate) } clk = clk_get(NULL, "irda_clk"); - if (!clk) { + if (IS_ERR(clk)) { dev_err(dev, "can not get irda_clk\n"); return -EIO; } diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 0737bd4d16696e4a90475a124f17568f87eb2c14..0f0f9ce3a7769ec552cc9f01f1915b44e44958fe 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -94,7 +94,8 @@ static int get_slot(struct macvlan_dev *vlan, struct macvtap_queue *q) int i; for (i = 0; i < MAX_MACVTAP_QUEUES; i++) { - if (rcu_dereference(vlan->taps[i]) == q) + if (rcu_dereference_protected(vlan->taps[i], + lockdep_is_held(&macvtap_lock)) == q) return i; } diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index f9347ea3d381e113d20c6a13ec32f0f51c5fc04c..b3321129a83c6dc33180fbbb07aadad296f14554 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -640,15 +640,9 @@ static int netconsole_netdev_event(struct notifier_block *this, * rtnl_lock already held */ if (nt->np.dev) { - spin_unlock_irqrestore( - &target_list_lock, - flags); __netpoll_cleanup(&nt->np); - spin_lock_irqsave(&target_list_lock, - flags); dev_put(nt->np.dev); nt->np.dev = NULL; - netconsole_target_put(nt); } nt->enabled = 0; stopped = true; diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c index 2346b38b9837101deae4848443da3d5b6be7cdeb..799789518e873edf273c95be6ec1c3b59ff4aa80 100644 --- a/drivers/net/phy/bcm87xx.c +++ b/drivers/net/phy/bcm87xx.c @@ -229,3 +229,5 @@ static void __exit bcm87xx_exit(void) ARRAY_SIZE(bcm87xx_driver)); } module_exit(bcm87xx_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c index e0cc4ef33dee2b035ee576ecbb17196984925d74..eefe49e8713ca633c8383b1c388826f45e5c9e0c 100644 --- a/drivers/net/phy/mdio-mux-gpio.c +++ b/drivers/net/phy/mdio-mux-gpio.c @@ -101,7 +101,6 @@ static int __devinit mdio_mux_gpio_probe(struct platform_device *pdev) n--; gpio_free(s->gpio[n]); } - devm_kfree(&pdev->dev, s); return r; } diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c index 5c120189ec86d419866b7320c36f4d618dc5df64..4d4d25efc1e10a2b87e3c8ab993ae3ba6167a7dd 100644 --- a/drivers/net/phy/mdio-mux.c +++ b/drivers/net/phy/mdio-mux.c @@ -132,7 +132,7 @@ int mdio_mux_init(struct device *dev, pb->mii_bus = parent_bus; ret_val = -ENODEV; - for_each_child_of_node(dev->of_node, child_bus_node) { + for_each_available_child_of_node(dev->of_node, child_bus_node) { u32 v; r = of_property_read_u32(child_bus_node, "reg", &v); diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index cf287e0eb4088574530bdb65b86d0276b589b744..2165d5fdb8c0f08675772f8dded60f3a15ac34ba 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -21,6 +21,12 @@ #include #include +/* Operation Mode Strap Override */ +#define MII_KSZPHY_OMSO 0x16 +#define KSZPHY_OMSO_B_CAST_OFF (1 << 9) +#define KSZPHY_OMSO_RMII_OVERRIDE (1 << 1) +#define KSZPHY_OMSO_MII_OVERRIDE (1 << 0) + /* general Interrupt control/status reg in vendor specific block. */ #define MII_KSZPHY_INTCS 0x1B #define KSZPHY_INTCS_JABBER (1 << 15) @@ -101,6 +107,13 @@ static int kszphy_config_init(struct phy_device *phydev) return 0; } +static int ksz8021_config_init(struct phy_device *phydev) +{ + const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE; + phy_write(phydev, MII_KSZPHY_OMSO, val); + return 0; +} + static int ks8051_config_init(struct phy_device *phydev) { int regval; @@ -128,9 +141,22 @@ static struct phy_driver ksphy_driver[] = { .config_intr = ks8737_config_intr, .driver = { .owner = THIS_MODULE,}, }, { - .phy_id = PHY_ID_KS8041, + .phy_id = PHY_ID_KSZ8021, + .phy_id_mask = 0x00ffffff, + .name = "Micrel KSZ8021", + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = ksz8021_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_KSZ8041, .phy_id_mask = 0x00fffff0, - .name = "Micrel KS8041", + .name = "Micrel KSZ8041", .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -141,9 +167,9 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }, { - .phy_id = PHY_ID_KS8051, + .phy_id = PHY_ID_KSZ8051, .phy_id_mask = 0x00fffff0, - .name = "Micrel KS8051", + .name = "Micrel KSZ8051", .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -154,8 +180,8 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }, { - .phy_id = PHY_ID_KS8001, - .name = "Micrel KS8001 or KS8721", + .phy_id = PHY_ID_KSZ8001, + .name = "Micrel KSZ8001 or KS8721", .phy_id_mask = 0x00ffffff, .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -201,10 +227,11 @@ MODULE_LICENSE("GPL"); static struct mdio_device_id __maybe_unused micrel_tbl[] = { { PHY_ID_KSZ9021, 0x000ffffe }, - { PHY_ID_KS8001, 0x00ffffff }, + { PHY_ID_KSZ8001, 0x00ffffff }, { PHY_ID_KS8737, 0x00fffff0 }, - { PHY_ID_KS8041, 0x00fffff0 }, - { PHY_ID_KS8051, 0x00fffff0 }, + { PHY_ID_KSZ8021, 0x00ffffff }, + { PHY_ID_KSZ8041, 0x00fffff0 }, + { PHY_ID_KSZ8051, 0x00fffff0 }, { } }; diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 6d6192316b30988ed742cf7261de5c5daaa310f2..88e3991464e7e1531934bcb562718e97abcbfb9b 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -56,6 +56,32 @@ static int smsc_phy_config_init(struct phy_device *phydev) return smsc_phy_ack_interrupt (phydev); } +static int lan87xx_config_init(struct phy_device *phydev) +{ + /* + * Make sure the EDPWRDOWN bit is NOT set. Setting this bit on + * LAN8710/LAN8720 PHY causes the PHY to misbehave, likely due + * to a bug on the chip. + * + * When the system is powered on with the network cable being + * disconnected all the way until after ifconfig ethX up is + * issued for the LAN port with this PHY, connecting the cable + * afterwards does not cause LINK change detection, while the + * expected behavior is the Link UP being detected. + */ + int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + if (rc < 0) + return rc; + + rc &= ~MII_LAN83C185_EDPWRDOWN; + + rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, rc); + if (rc < 0) + return rc; + + return smsc_phy_ack_interrupt(phydev); +} + static int lan911x_config_init(struct phy_device *phydev) { return smsc_phy_ack_interrupt(phydev); @@ -162,7 +188,7 @@ static struct phy_driver smsc_phy_driver[] = { /* basic functions */ .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .config_init = smsc_phy_config_init, + .config_init = lan87xx_config_init, /* IRQ related */ .ack_interrupt = smsc_phy_ack_interrupt, diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index cbf7047decc04340d39be3daa95359469b9e73ec..20f31d0d1536c36658b481fa083eb6b445637ef7 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -570,7 +570,7 @@ static int pppoe_release(struct socket *sock) po = pppox_sk(sk); - if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { + if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND | PPPOX_ZOMBIE)) { dev_put(po->pppoe_dev); po->pppoe_dev = NULL; } diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c index 1c98321b56cc1547eb105b39758d2663e54de3ae..162464fe86bf7634fb9ac6c21ecd76e25beb10b6 100644 --- a/drivers/net/ppp/pptp.c +++ b/drivers/net/ppp/pptp.c @@ -189,7 +189,7 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb) if (sk_pppox(po)->sk_state & PPPOX_DEAD) goto tx_error; - rt = ip_route_output_ports(&init_net, &fl4, NULL, + rt = ip_route_output_ports(sock_net(sk), &fl4, NULL, opt->dst_addr.sin_addr.s_addr, opt->src_addr.sin_addr.s_addr, 0, 0, IPPROTO_GRE, @@ -468,7 +468,7 @@ static int pptp_connect(struct socket *sock, struct sockaddr *uservaddr, po->chan.private = sk; po->chan.ops = &pptp_chan_ops; - rt = ip_route_output_ports(&init_net, &fl4, sk, + rt = ip_route_output_ports(sock_net(sk), &fl4, sk, opt->dst_addr.sin_addr.s_addr, opt->src_addr.sin_addr.s_addr, 0, 0, diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 87707ab3943084821e1b7e5c5b9a201d51a944ba..f8cd61f449a4772da5a50a446cd07fc80d5928c8 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -795,16 +795,17 @@ static void team_port_leave(struct team *team, struct team_port *port) } #ifdef CONFIG_NET_POLL_CONTROLLER -static int team_port_enable_netpoll(struct team *team, struct team_port *port) +static int team_port_enable_netpoll(struct team *team, struct team_port *port, + gfp_t gfp) { struct netpoll *np; int err; - np = kzalloc(sizeof(*np), GFP_KERNEL); + np = kzalloc(sizeof(*np), gfp); if (!np) return -ENOMEM; - err = __netpoll_setup(np, port->dev); + err = __netpoll_setup(np, port->dev, gfp); if (err) { kfree(np); return err; @@ -833,7 +834,8 @@ static struct netpoll_info *team_netpoll_info(struct team *team) } #else -static int team_port_enable_netpoll(struct team *team, struct team_port *port) +static int team_port_enable_netpoll(struct team *team, struct team_port *port, + gfp_t gfp) { return 0; } @@ -846,7 +848,7 @@ static struct netpoll_info *team_netpoll_info(struct team *team) } #endif -static void __team_port_change_check(struct team_port *port, bool linkup); +static void __team_port_change_port_added(struct team_port *port, bool linkup); static int team_port_add(struct team *team, struct net_device *port_dev) { @@ -913,7 +915,7 @@ static int team_port_add(struct team *team, struct net_device *port_dev) } if (team_netpoll_info(team)) { - err = team_port_enable_netpoll(team, port); + err = team_port_enable_netpoll(team, port, GFP_KERNEL); if (err) { netdev_err(dev, "Failed to enable netpoll on device %s\n", portname); @@ -946,7 +948,7 @@ static int team_port_add(struct team *team, struct net_device *port_dev) team_port_enable(team, port); list_add_tail_rcu(&port->list, &team->port_list); __team_compute_features(team); - __team_port_change_check(port, !!netif_carrier_ok(port_dev)); + __team_port_change_port_added(port, !!netif_carrier_ok(port_dev)); __team_options_change_check(team); netdev_info(dev, "Port device %s added\n", portname); @@ -981,6 +983,8 @@ static int team_port_add(struct team *team, struct net_device *port_dev) return err; } +static void __team_port_change_port_removed(struct team_port *port); + static int team_port_del(struct team *team, struct net_device *port_dev) { struct net_device *dev = team->dev; @@ -997,8 +1001,7 @@ static int team_port_del(struct team *team, struct net_device *port_dev) __team_option_inst_mark_removed_port(team, port); __team_options_change_check(team); __team_option_inst_del_port(team, port); - port->removed = true; - __team_port_change_check(port, false); + __team_port_change_port_removed(port); team_port_disable(team, port); list_del_rcu(&port->list); netdev_rx_handler_unregister(port_dev); @@ -1443,7 +1446,7 @@ static void team_netpoll_cleanup(struct net_device *dev) } static int team_netpoll_setup(struct net_device *dev, - struct netpoll_info *npifo) + struct netpoll_info *npifo, gfp_t gfp) { struct team *team = netdev_priv(dev); struct team_port *port; @@ -1451,7 +1454,7 @@ static int team_netpoll_setup(struct net_device *dev, mutex_lock(&team->lock); list_for_each_entry(port, &team->port_list, list) { - err = team_port_enable_netpoll(team, port); + err = team_port_enable_netpoll(team, port, gfp); if (err) { __team_netpoll_cleanup(team); break; @@ -1650,8 +1653,8 @@ static int team_nl_cmd_noop(struct sk_buff *skb, struct genl_info *info) hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &team_nl_family, 0, TEAM_CMD_NOOP); - if (IS_ERR(hdr)) { - err = PTR_ERR(hdr); + if (!hdr) { + err = -EMSGSIZE; goto err_msg_put; } @@ -1845,8 +1848,8 @@ static int team_nl_send_options_get(struct team *team, u32 pid, u32 seq, hdr = genlmsg_put(skb, pid, seq, &team_nl_family, flags | NLM_F_MULTI, TEAM_CMD_OPTIONS_GET); - if (IS_ERR(hdr)) - return PTR_ERR(hdr); + if (!hdr) + return -EMSGSIZE; if (nla_put_u32(skb, TEAM_ATTR_TEAM_IFINDEX, team->dev->ifindex)) goto nla_put_failure; @@ -2065,8 +2068,8 @@ static int team_nl_fill_port_list_get(struct sk_buff *skb, hdr = genlmsg_put(skb, pid, seq, &team_nl_family, flags, TEAM_CMD_PORT_LIST_GET); - if (IS_ERR(hdr)) - return PTR_ERR(hdr); + if (!hdr) + return -EMSGSIZE; if (nla_put_u32(skb, TEAM_ATTR_TEAM_IFINDEX, team->dev->ifindex)) goto nla_put_failure; @@ -2249,13 +2252,11 @@ static void __team_options_change_check(struct team *team) } /* rtnl lock is held */ -static void __team_port_change_check(struct team_port *port, bool linkup) + +static void __team_port_change_send(struct team_port *port, bool linkup) { int err; - if (!port->removed && port->state.linkup == linkup) - return; - port->changed = true; port->state.linkup = linkup; team_refresh_port_linkup(port); @@ -2280,6 +2281,23 @@ static void __team_port_change_check(struct team_port *port, bool linkup) } +static void __team_port_change_check(struct team_port *port, bool linkup) +{ + if (port->state.linkup != linkup) + __team_port_change_send(port, linkup); +} + +static void __team_port_change_port_added(struct team_port *port, bool linkup) +{ + __team_port_change_send(port, linkup); +} + +static void __team_port_change_port_removed(struct team_port *port) +{ + port->removed = true; + __team_port_change_send(port, false); +} + static void team_port_change_check(struct team_port *port, bool linkup) { struct team *team = port->team; diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 926d4db5cb384f2de6df5ae871d0ec6171c6fe7d..3a16d4fdaa052817135c885b23cb28d90d872ec6 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -187,7 +187,6 @@ static void __tun_detach(struct tun_struct *tun) netif_tx_lock_bh(tun->dev); netif_carrier_off(tun->dev); tun->tfile = NULL; - tun->socket.file = NULL; netif_tx_unlock_bh(tun->dev); /* Drop read queue */ diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 4fd48df6b989eee8aff62ee1d5edb5014bae5e1d..32e31c5c5dc6bfe95b4d38e377a508448d85c890 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -961,6 +961,10 @@ static const struct usb_device_id products [] = { // DLink DUB-E100 H/W Ver B1 Alternate USB_DEVICE (0x2001, 0x3c05), .driver_info = (unsigned long) &ax88772_info, +}, { + // DLink DUB-E100 H/W Ver C1 + USB_DEVICE (0x2001, 0x1a02), + .driver_info = (unsigned long) &ax88772_info, }, { // Linksys USB1000 USB_DEVICE (0x1737, 0x0039), diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c index 187c144c5e5bc23f3fd9b6286374349f7883862f..7d78669000d704d8448aea5e24a8a73c312badfc 100644 --- a/drivers/net/usb/cdc-phonet.c +++ b/drivers/net/usb/cdc-phonet.c @@ -130,7 +130,7 @@ static int rx_submit(struct usbpn_dev *pnd, struct urb *req, gfp_t gfp_flags) struct page *page; int err; - page = alloc_page(gfp_flags); + page = __skb_alloc_page(gfp_flags | __GFP_NOMEMALLOC, NULL); if (!page) return -ENOMEM; @@ -232,6 +232,7 @@ static int usbpn_open(struct net_device *dev) struct urb *req = usb_alloc_urb(0, GFP_KERNEL); if (!req || rx_submit(pnd, req, GFP_KERNEL | __GFP_COLD)) { + usb_free_urb(req); usbpn_close(dev); return -ENOMEM; } diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index f4ce5957df326bb94131031fabdb1daf6dcabf42..4cd582a4f625d55d5edd8c2cd3952d5571074921 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1225,6 +1225,26 @@ static const struct usb_device_id cdc_devs[] = { .driver_info = (unsigned long) &wwan_info, }, + /* Dell branded MBM devices like DW5550 */ + { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_VENDOR, + .idVendor = 0x413c, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = (unsigned long) &wwan_info, + }, + + /* Toshiba branded MBM devices */ + { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_VENDOR, + .idVendor = 0x0930, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = (unsigned long) &wwan_info, + }, + /* Generic CDC-NCM devices */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 2ea126a16d79add1f5271e8848942ffc2a755b37..3543c9e578247e6ee550ef7f18f680b680be3587 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -247,30 +247,12 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf) */ static int qmi_wwan_bind_shared(struct usbnet *dev, struct usb_interface *intf) { - int rv; struct qmi_wwan_state *info = (void *)&dev->data; - /* ZTE makes devices where the interface descriptors and endpoint - * configurations of two or more interfaces are identical, even - * though the functions are completely different. If set, then - * driver_info->data is a bitmap of acceptable interface numbers - * allowing us to bind to one such interface without binding to - * all of them - */ - if (dev->driver_info->data && - !test_bit(intf->cur_altsetting->desc.bInterfaceNumber, &dev->driver_info->data)) { - dev_info(&intf->dev, "not on our whitelist - ignored"); - rv = -ENODEV; - goto err; - } - /* control and data is shared */ info->control = intf; info->data = intf; - rv = qmi_wwan_register_subdriver(dev); - -err: - return rv; + return qmi_wwan_register_subdriver(dev); } static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf) @@ -315,7 +297,7 @@ static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message) if (ret < 0) goto err; - if (info->subdriver && info->subdriver->suspend) + if (intf == info->control && info->subdriver && info->subdriver->suspend) ret = info->subdriver->suspend(intf, message); if (ret < 0) usbnet_resume(intf); @@ -328,13 +310,14 @@ static int qmi_wwan_resume(struct usb_interface *intf) struct usbnet *dev = usb_get_intfdata(intf); struct qmi_wwan_state *info = (void *)&dev->data; int ret = 0; + bool callsub = (intf == info->control && info->subdriver && info->subdriver->resume); - if (info->subdriver && info->subdriver->resume) + if (callsub) ret = info->subdriver->resume(intf); if (ret < 0) goto err; ret = usbnet_resume(intf); - if (ret < 0 && info->subdriver && info->subdriver->resume && info->subdriver->suspend) + if (ret < 0 && callsub && info->subdriver->suspend) info->subdriver->suspend(intf, PMSG_SUSPEND); err: return ret; @@ -356,217 +339,71 @@ static const struct driver_info qmi_wwan_shared = { .manage_power = qmi_wwan_manage_power, }; -static const struct driver_info qmi_wwan_force_int0 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(0), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int1 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(1), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int2 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(2), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int3 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(3), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int4 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(4), /* interface whitelist bitmap */ -}; - -/* Sierra Wireless provide equally useless interface descriptors - * Devices in QMI mode can be switched between two different - * configurations: - * a) USB interface #8 is QMI/wwan - * b) USB interfaces #8, #19 and #20 are QMI/wwan - * - * Both configurations provide a number of other interfaces (serial++), - * some of which have the same endpoint configuration as we expect, so - * a whitelist or blacklist is necessary. - * - * FIXME: The below whitelist should include BIT(20). It does not - * because I cannot get it to work... - */ -static const struct driver_info qmi_wwan_sierra = { - .description = "Sierra Wireless wwan/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(8) | BIT(19), /* interface whitelist bitmap */ -}; - #define HUAWEI_VENDOR_ID 0x12D1 +/* map QMI/wwan function by a fixed interface number */ +#define QMI_FIXED_INTF(vend, prod, num) \ + USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \ + .driver_info = (unsigned long)&qmi_wwan_shared + /* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */ #define QMI_GOBI1K_DEVICE(vend, prod) \ - USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long)&qmi_wwan_force_int3 + QMI_FIXED_INTF(vend, prod, 3) -/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */ +/* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */ #define QMI_GOBI_DEVICE(vend, prod) \ - USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long)&qmi_wwan_force_int0 + QMI_FIXED_INTF(vend, prod, 0) static const struct usb_device_id products[] = { + /* 1. CDC ECM like devices match on the control interface */ { /* Huawei E392, E398 and possibly others sharing both device id and more... */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 9, /* CDC Ethernet *control* interface */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9), .driver_info = (unsigned long)&qmi_wwan_info, }, { /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 57, /* CDC Ethernet *control* interface */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57), .driver_info = (unsigned long)&qmi_wwan_info, }, - { /* Huawei E392, E398 and possibly others in "Windows mode" - * using a combined control and data interface without any CDC - * functional descriptors - */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 17, - .driver_info = (unsigned long)&qmi_wwan_shared, + + /* 2. Combined interface devices matching on class+protocol */ + { /* Huawei E367 and possibly others in "Windows mode" */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 7), + .driver_info = (unsigned long)&qmi_wwan_info, }, - { /* Pantech UML290 */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x106c, - .idProduct = 0x3718, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xf0, - .bInterfaceProtocol = 0xff, + { /* Huawei E392, E398 and possibly others in "Windows mode" */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17), .driver_info = (unsigned long)&qmi_wwan_shared, }, - { /* ZTE MF820D */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0167, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE MF821D */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0326, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3520-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0055, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int1, - }, - { /* ZTE (Vodafone) K3565-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0063, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3570-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x1008, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3571-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x1010, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3765-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x2002, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K4505-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0104, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE MF60 */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x1402, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int2, + { /* Pantech UML290, P4200 and more */ + USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), + .driver_info = (unsigned long)&qmi_wwan_shared, }, - { /* Sierra Wireless MC77xx in QMI mode */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x1199, - .idProduct = 0x68a2, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_sierra, + { /* Pantech UML290 - newer firmware */ + USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), + .driver_info = (unsigned long)&qmi_wwan_shared, }, - /* Gobi 1000 devices */ + /* 3. Combined interface devices matching on interface number */ + {QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0157, 5)}, /* ZTE MF683 */ + {QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */ + {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ + {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1018, 3)}, /* ZTE (Vodafone) K5006-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ + {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ + {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ + {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ + {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ + {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ + {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ + + /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ - {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ @@ -579,9 +416,11 @@ static const struct usb_device_id products[] = { {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ - /* Gobi 2000 and 3000 devices */ + /* 5. Gobi 2000 and 3000 devices */ {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ + {QMI_GOBI_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ + {QMI_GOBI_DEVICE(0x05c6, 0x920d)}, /* Gobi 3000 Composite */ {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ {QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */ {QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */ @@ -589,6 +428,8 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */ {QMI_GOBI_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */ {QMI_GOBI_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */ + {QMI_GOBI_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */ + {QMI_GOBI_DEVICE(0x1199, 0x68a9)}, /* Sierra Wireless Modem */ {QMI_GOBI_DEVICE(0x1199, 0x9001)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x9002)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x9003)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ @@ -600,11 +441,17 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x9011)}, /* Sierra Wireless Gobi 2000 Modem device (MC8305) */ + {QMI_FIXED_INTF(0x1199, 0x9011, 5)}, /* alternate interface number!? */ {QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */ {QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ + {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ + {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ + {QMI_GOBI_DEVICE(0x12d1, 0x14f1)}, /* Sony Gobi 3000 Composite */ + {QMI_GOBI_DEVICE(0x1410, 0xa021)}, /* Foxconn Gobi 3000 Modem device (Novatel E396) */ + { } /* END */ }; MODULE_DEVICE_TABLE(usb, products); diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index d75d1f56becff95ae9cf7b8f8dc08990d142d06c..8e22417fa6c11b5d41845bda1ff4c84e9d369cda 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -68,15 +68,8 @@ static atomic_t iface_counter = ATOMIC_INIT(0); */ #define SIERRA_NET_USBCTL_BUF_LEN 1024 -/* list of interface numbers - used for constructing interface lists */ -struct sierra_net_iface_info { - const u32 infolen; /* number of interface numbers on list */ - const u8 *ifaceinfo; /* pointer to the array holding the numbers */ -}; - struct sierra_net_info_data { u16 rx_urb_size; - struct sierra_net_iface_info whitelist; }; /* Private data structure */ @@ -637,21 +630,6 @@ static int sierra_net_change_mtu(struct net_device *net, int new_mtu) return usbnet_change_mtu(net, new_mtu); } -static int is_whitelisted(const u8 ifnum, - const struct sierra_net_iface_info *whitelist) -{ - if (whitelist) { - const u8 *list = whitelist->ifaceinfo; - int i; - - for (i = 0; i < whitelist->infolen; i++) { - if (list[i] == ifnum) - return 1; - } - } - return 0; -} - static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap) { int result = 0; @@ -678,7 +656,7 @@ static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap) return -EIO; } - *datap = *attrdata; + *datap = le16_to_cpu(*attrdata); kfree(attrdata); return result; @@ -706,11 +684,6 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf) dev_dbg(&dev->udev->dev, "%s", __func__); ifacenum = intf->cur_altsetting->desc.bInterfaceNumber; - /* We only accept certain interfaces */ - if (!is_whitelisted(ifacenum, &data->whitelist)) { - dev_dbg(&dev->udev->dev, "Ignoring interface: %d", ifacenum); - return -ENODEV; - } numendpoints = intf->cur_altsetting->desc.bNumEndpoints; /* We have three endpoints, bulk in and out, and a status */ if (numendpoints != 3) { @@ -945,13 +918,8 @@ struct sk_buff *sierra_net_tx_fixup(struct usbnet *dev, struct sk_buff *skb, return NULL; } -static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 }; static const struct sierra_net_info_data sierra_net_info_data_direct_ip = { .rx_urb_size = 8 * 1024, - .whitelist = { - .infolen = ARRAY_SIZE(sierra_net_ifnum_list), - .ifaceinfo = sierra_net_ifnum_list - } }; static const struct driver_info sierra_net_info_direct_ip = { @@ -965,15 +933,19 @@ static const struct driver_info sierra_net_info_direct_ip = { .data = (unsigned long)&sierra_net_info_data_direct_ip, }; +#define DIRECT_IP_DEVICE(vend, prod) \ + {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 7), \ + .driver_info = (unsigned long)&sierra_net_info_direct_ip}, \ + {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 10), \ + .driver_info = (unsigned long)&sierra_net_info_direct_ip}, \ + {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 11), \ + .driver_info = (unsigned long)&sierra_net_info_direct_ip} + static const struct usb_device_id products[] = { - {USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, - {USB_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, - {USB_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, - {USB_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, + DIRECT_IP_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */ + DIRECT_IP_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */ + DIRECT_IP_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */ + DIRECT_IP_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */ {}, /* last item */ }; diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index f5ab6e613ec8dcddf6b36e25a1dd0f79c50849db..376143e8a1aaf6f78ee44fb76888922064c46dd1 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1253,6 +1253,7 @@ static struct usb_driver smsc75xx_driver = { .probe = usbnet_probe, .suspend = usbnet_suspend, .resume = usbnet_resume, + .reset_resume = usbnet_resume, .disconnect = usbnet_disconnect, .disable_hub_initiated_lpm = 1, }; diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 8531c1caac283263febc4f674daedef5b7844ff1..fc9f578a1e253a781b9406b1e4a43ed2de2688d1 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1201,19 +1201,26 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, } EXPORT_SYMBOL_GPL(usbnet_start_xmit); -static void rx_alloc_submit(struct usbnet *dev, gfp_t flags) +static int rx_alloc_submit(struct usbnet *dev, gfp_t flags) { struct urb *urb; int i; + int ret = 0; /* don't refill the queue all at once */ for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) { urb = usb_alloc_urb(0, flags); if (urb != NULL) { - if (rx_submit(dev, urb, flags) == -ENOLINK) - return; + ret = rx_submit(dev, urb, flags); + if (ret) + goto err; + } else { + ret = -ENOMEM; + goto err; } } +err: + return ret; } /*-------------------------------------------------------------------------*/ @@ -1257,7 +1264,8 @@ static void usbnet_bh (unsigned long param) int temp = dev->rxq.qlen; if (temp < RX_QLEN(dev)) { - rx_alloc_submit(dev, GFP_ATOMIC); + if (rx_alloc_submit(dev, GFP_ATOMIC) == -ENOLINK) + return; if (temp != dev->rxq.qlen) netif_dbg(dev, link, dev->net, "rxqlen %d --> %d\n", @@ -1573,7 +1581,7 @@ int usbnet_resume (struct usb_interface *intf) netif_device_present(dev->net) && !timer_pending(&dev->delay) && !test_bit(EVENT_RX_HALT, &dev->flags)) - rx_alloc_submit(dev, GFP_KERNEL); + rx_alloc_submit(dev, GFP_NOIO); if (!(dev->txq.qlen >= TX_QLEN(dev))) netif_tx_wake_all_queues(dev->net); diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 93e0cfb739b89b3f53964e6596c5b36e804b4a1b..ce9d4f2c9776e08d1b543f18de8cb7100fe43a86 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -3019,6 +3019,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, netdev->watchdog_timeo = 5 * HZ; INIT_WORK(&adapter->work, vmxnet3_reset_work); + set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); if (adapter->intr.type == VMXNET3_IT_MSIX) { int i; @@ -3043,7 +3044,6 @@ vmxnet3_probe_device(struct pci_dev *pdev, goto err_register; } - set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); vmxnet3_check_link(adapter, false); atomic_inc(&devices_found); return 0; diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 9eb6479306d699dba13c63124a41a64f07b616ec..ef36cafd44b72138436ce3175dd5dfca7d184082 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -774,14 +774,15 @@ static int __devinit dscc4_init_one(struct pci_dev *pdev, } /* Global interrupt queue */ writel((u32)(((IRQ_RING_SIZE >> 5) - 1) << 20), ioaddr + IQLENR1); + + rc = -ENOMEM; + priv->iqcfg = (__le32 *) pci_alloc_consistent(pdev, IRQ_RING_SIZE*sizeof(__le32), &priv->iqcfg_dma); if (!priv->iqcfg) goto err_free_irq_5; writel(priv->iqcfg_dma, ioaddr + IQCFG); - rc = -ENOMEM; - /* * SCC 0-3 private rx/tx irq structures * IQRX/TXi needs to be set soon. Learned it the hard way... diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index aaaca9aa2293dcf4fc991cb1645056ebfa3d0da1..3f575afd8cfcb03f283df0932f6fb33bb1495cca 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -10,6 +10,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include #include #include diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index 283237f6f074a775b5ce82d6db1a64459168cfaf..def12b38cbf7002d27b83253c3be238e7e7f0802 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -326,8 +326,10 @@ int i2400m_barker_db_init(const char *_options) unsigned barker; options_orig = kstrdup(_options, GFP_KERNEL); - if (options_orig == NULL) + if (options_orig == NULL) { + result = -ENOMEM; goto error_parse; + } options = options_orig; while ((token = strsep(&options, ",")) != NULL) { diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index efc162e0b511c6d67ecdd4d011caa84c84708b8b..88b8d64c90f1b49a302deaca3af07788ee4b27c1 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -342,7 +342,7 @@ static int at76_dfu_get_status(struct usb_device *udev, return ret; } -static u8 at76_dfu_get_state(struct usb_device *udev, u8 *state) +static int at76_dfu_get_state(struct usb_device *udev, u8 *state) { int ret; diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 8c4c040a47b8cf69e75b4f022dafc3542f2ae908..2aab20ee9f387f8c89289ca409e6ead0fa83722c 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2056,9 +2056,7 @@ ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf) void ath5k_beacon_config(struct ath5k_hw *ah) { - unsigned long flags; - - spin_lock_irqsave(&ah->block, flags); + spin_lock_bh(&ah->block); ah->bmisscount = 0; ah->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); @@ -2085,7 +2083,7 @@ ath5k_beacon_config(struct ath5k_hw *ah) ath5k_hw_set_imr(ah, ah->imask); mmiowb(); - spin_unlock_irqrestore(&ah->block, flags); + spin_unlock_bh(&ah->block); } static void ath5k_tasklet_beacon(unsigned long data) diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 4026c906cc7b45745e3a80dbc5edc9360413f78f..b7e0258887e70cf9be193c70e73334e9e8fe0473 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -1482,7 +1482,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) case AR5K_EEPROM_MODE_11A: offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); rate_pcal_info = ee->ee_rate_tpwr_a; - ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN; break; case AR5K_EEPROM_MODE_11B: offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index dc2bcfeadeb45b121de183bd558045a69dda47ba..94a9bbea6874c0daf10510e26fa2862f8ebbfa81 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -182,6 +182,7 @@ #define AR5K_EEPROM_EEP_DELTA 10 #define AR5K_EEPROM_N_MODES 3 #define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8 #define AR5K_EEPROM_N_2GHZ_CHAN 3 #define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 #define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c index 260e7dc7f7512af8442f957e2b4e6b2985355237..d56453e43d7e353e0890d3962e264448d7185771 100644 --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -254,7 +254,6 @@ ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ath5k_vif *avf = (void *)vif->drv_priv; struct ath5k_hw *ah = hw->priv; struct ath_common *common = ath5k_hw_common(ah); - unsigned long flags; mutex_lock(&ah->lock); @@ -300,9 +299,9 @@ ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, } if (changes & BSS_CHANGED_BEACON) { - spin_lock_irqsave(&ah->block, flags); + spin_lock_bh(&ah->block); ath5k_beacon_update(hw, vif); - spin_unlock_irqrestore(&ah->block, flags); + spin_unlock_bh(&ah->block); } if (changes & BSS_CHANGED_BEACON_ENABLED) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 2588848f4a822a1bf879ce447f9f146c5e186873..d066f2516e4753617aa55f1522427eb96f4a1115 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -2982,6 +2982,10 @@ static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah, case EEP_RX_MASK: return pBase->txrxMask & 0xf; case EEP_PAPRD: + if (AR_SREV_9462(ah)) + return false; + if (!ah->config.enable_paprd); + return false; return !!(pBase->featureEnable & BIT(5)); case EEP_CHAIN_MASK_REDUCE: return (pBase->miscConfiguration >> 0x3) & 0x1; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c index 2c9f7d7ed4cc2557a86cb5256afc213a4c16f5c5..0ed3846f9cbb36e8aa1f67eab09dc9e5f219b0c8 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c @@ -142,6 +142,7 @@ static int ar9003_paprd_setup_single_table(struct ath_hw *ah) }; int training_power; int i, val; + u32 am2pm_mask = ah->paprd_ratemask; if (IS_CHAN_2GHZ(ah->curchan)) training_power = ar9003_get_training_power_2g(ah); @@ -158,10 +159,13 @@ static int ar9003_paprd_setup_single_table(struct ath_hw *ah) } ah->paprd_training_power = training_power; + if (AR_SREV_9330(ah)) + am2pm_mask = 0; + REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2AM, AR_PHY_PAPRD_AM2AM_MASK, ah->paprd_ratemask); REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2PM, AR_PHY_PAPRD_AM2PM_MASK, - ah->paprd_ratemask); + am2pm_mask); REG_RMW_FIELD(ah, AR_PHY_PAPRD_HT40, AR_PHY_PAPRD_HT40_MASK, ah->paprd_ratemask_ht40); @@ -782,6 +786,102 @@ int ar9003_paprd_setup_gain_table(struct ath_hw *ah, int chain) } EXPORT_SYMBOL(ar9003_paprd_setup_gain_table); +static bool ar9003_paprd_retrain_pa_in(struct ath_hw *ah, + struct ath9k_hw_cal_data *caldata, + int chain) +{ + u32 *pa_in = caldata->pa_table[chain]; + int capdiv_offset, quick_drop_offset; + int capdiv2g, quick_drop; + int count = 0; + int i; + + if (!AR_SREV_9485(ah) && !AR_SREV_9330(ah)) + return false; + + capdiv2g = REG_READ_FIELD(ah, AR_PHY_65NM_CH0_TXRF3, + AR_PHY_65NM_CH0_TXRF3_CAPDIV2G); + + quick_drop = REG_READ_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3, + AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP); + + if (quick_drop) + quick_drop -= 0x40; + + for (i = 0; i < NUM_BIN + 1; i++) { + if (pa_in[i] == 1400) + count++; + } + + if (AR_SREV_9485(ah)) { + if (pa_in[23] < 800) { + capdiv_offset = (int)((1000 - pa_in[23] + 75) / 150); + capdiv2g += capdiv_offset; + if (capdiv2g > 7) { + capdiv2g = 7; + if (pa_in[23] < 600) { + quick_drop++; + if (quick_drop > 0) + quick_drop = 0; + } + } + } else if (pa_in[23] == 1400) { + quick_drop_offset = min_t(int, count / 3, 2); + quick_drop += quick_drop_offset; + capdiv2g += quick_drop_offset / 2; + + if (capdiv2g > 7) + capdiv2g = 7; + + if (quick_drop > 0) { + quick_drop = 0; + capdiv2g -= quick_drop_offset; + if (capdiv2g < 0) + capdiv2g = 0; + } + } else { + return false; + } + } else if (AR_SREV_9330(ah)) { + if (pa_in[23] < 1000) { + capdiv_offset = (1000 - pa_in[23]) / 100; + capdiv2g += capdiv_offset; + if (capdiv_offset > 3) { + capdiv_offset = 1; + quick_drop--; + } + + capdiv2g += capdiv_offset; + if (capdiv2g > 6) + capdiv2g = 6; + if (quick_drop < -4) + quick_drop = -4; + } else if (pa_in[23] == 1400) { + if (count > 3) { + quick_drop++; + capdiv2g -= count / 4; + if (quick_drop > -2) + quick_drop = -2; + } else { + capdiv2g--; + } + + if (capdiv2g < 0) + capdiv2g = 0; + } else { + return false; + } + } + + REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_TXRF3, + AR_PHY_65NM_CH0_TXRF3_CAPDIV2G, capdiv2g); + REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3, + AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP, + quick_drop); + + return true; +} + int ar9003_paprd_create_curve(struct ath_hw *ah, struct ath9k_hw_cal_data *caldata, int chain) { @@ -817,6 +917,9 @@ int ar9003_paprd_create_curve(struct ath_hw *ah, if (!create_pa_curve(data_L, data_U, pa_table, small_signal_gain)) status = -2; + if (ar9003_paprd_retrain_pa_in(ah, caldata, chain)) + status = -EINPROGRESS; + REG_CLR_BIT(ah, AR_PHY_PAPRD_TRAINER_STAT1, AR_PHY_PAPRD_TRAINER_STAT1_PAPRD_TRAIN_DONE); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 7bfbaf065a4332c89ac5568c0cde81ed42d9313e..84d3d49568616c5452692b1660253f6ae70468cf 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -625,6 +625,10 @@ #define AR_PHY_AIC_CTRL_4_B0 (AR_SM_BASE + 0x4c0) #define AR_PHY_AIC_STAT_2_B0 (AR_SM_BASE + 0x4cc) +#define AR_PHY_65NM_CH0_TXRF3 0x16048 +#define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G 0x0000001e +#define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G_S 1 + #define AR_PHY_65NM_CH0_SYNTH4 0x1608c #define AR_PHY_SYNTH4_LONG_SHIFT_SELECT (AR_SREV_9462(ah) ? 0x00000001 : 0x00000002) #define AR_PHY_SYNTH4_LONG_SHIFT_SELECT_S (AR_SREV_9462(ah) ? 0 : 1) diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 68b643c8943c4c2db074e4ada4eeb2fda397eccc..c8ef30127adb53da590bf4d6350798fa261dffa6 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -1577,6 +1577,8 @@ int ath9k_init_debug(struct ath_hw *ah) sc->debug.debugfs_phy, sc, &fops_tx_chainmask); debugfs_create_file("disable_ani", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_disable_ani); + debugfs_create_bool("paprd", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, + &sc->sc_ah->config.enable_paprd); debugfs_create_file("regidx", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_regidx); debugfs_create_file("regval", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c index bacdb8fb4ef453dda48d5a9394c0030cb7866596..9f83f71742a5ecb774f95c3d563f2e0dc7d37ab7 100644 --- a/drivers/net/wireless/ath/ath9k/gpio.c +++ b/drivers/net/wireless/ath/ath9k/gpio.c @@ -341,7 +341,8 @@ void ath9k_btcoex_stop_gen_timer(struct ath_softc *sc) { struct ath_btcoex *btcoex = &sc->btcoex; - ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer); + if (btcoex->hw_timer_enabled) + ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer); } u16 ath9k_btcoex_aggr_limit(struct ath_softc *sc, u32 max_4ms_framelen) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index cfa91ab7acf8b1fd7c4b29fab82cb812f6423d5d..4faf0a3958765bd07ae683fdd6dceb879a5adbfd 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -463,9 +463,6 @@ static void ath9k_hw_init_config(struct ath_hw *ah) ah->config.spurchans[i][1] = AR_NO_SPUR; } - /* PAPRD needs some more work to be enabled */ - ah->config.paprd_disable = 1; - ah->config.rx_intr_mitigation = true; ah->config.pcieSerDesWrite = true; @@ -730,6 +727,7 @@ int ath9k_hw_init(struct ath_hw *ah) case AR9300_DEVID_QCA955X: case AR9300_DEVID_AR9580: case AR9300_DEVID_AR9462: + case AR9485_DEVID_AR1111: break; default: if (common->bus_ops->ath_bus_type == ATH_USB) @@ -977,9 +975,6 @@ static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah, else imr_reg |= AR_IMR_TXOK; - if (opmode == NL80211_IFTYPE_AP) - imr_reg |= AR_IMR_MIB; - ENABLE_REGWRITE_BUFFER(ah); REG_WRITE(ah, AR_IMR, imr_reg); @@ -1777,6 +1772,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, /* Operating channel changed, reset channel calibration data */ memset(caldata, 0, sizeof(*caldata)); ath9k_init_nfcal_hist_buffer(ah, chan); + } else if (caldata) { + caldata->paprd_packet_sent = false; } ah->noise = ath9k_hw_getchan_noise(ah, chan); @@ -2500,9 +2497,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) pCap->rx_status_len = sizeof(struct ar9003_rxs); pCap->tx_desc_len = sizeof(struct ar9003_txc); pCap->txs_len = sizeof(struct ar9003_txs); - if (!ah->config.paprd_disable && - ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) - pCap->hw_caps |= ATH9K_HW_CAP_PAPRD; } else { pCap->tx_desc_len = sizeof(struct ath_desc); if (AR_SREV_9280_20(ah)) diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index dd0c146d81dccd77d1d735db888884be6227c782..de6968fc64f42920304fe52dd93a493c3ce679c6 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -49,6 +49,7 @@ #define AR9300_DEVID_AR9462 0x0034 #define AR9300_DEVID_AR9330 0x0035 #define AR9300_DEVID_QCA955X 0x0038 +#define AR9485_DEVID_AR1111 0x0037 #define AR5416_AR9100_DEVID 0x000b @@ -235,7 +236,6 @@ enum ath9k_hw_caps { ATH9K_HW_CAP_LDPC = BIT(6), ATH9K_HW_CAP_FASTCLOCK = BIT(7), ATH9K_HW_CAP_SGI_20 = BIT(8), - ATH9K_HW_CAP_PAPRD = BIT(9), ATH9K_HW_CAP_ANT_DIV_COMB = BIT(10), ATH9K_HW_CAP_2GHZ = BIT(11), ATH9K_HW_CAP_5GHZ = BIT(12), @@ -286,12 +286,12 @@ struct ath9k_ops_config { u8 pcie_clock_req; u32 pcie_waen; u8 analog_shiftreg; - u8 paprd_disable; u32 ofdm_trig_low; u32 ofdm_trig_high; u32 cck_trig_high; u32 cck_trig_low; u32 enable_ani; + u32 enable_paprd; int serialize_regmode; bool rx_intr_mitigation; bool tx_intr_mitigation; @@ -404,6 +404,7 @@ struct ath9k_hw_cal_data { int8_t iCoff; int8_t qCoff; bool rtt_done; + bool paprd_packet_sent; bool paprd_done; bool nfcal_pending; bool nfcal_interference; diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c index d4549e9aac5c5f1f30ace855d6c94dafe98f4d38..7b88b9c39ccddc4ef4e3aeafb53e437d0f35a0ce 100644 --- a/drivers/net/wireless/ath/ath9k/link.c +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -254,8 +254,9 @@ void ath_paprd_calibrate(struct work_struct *work) int chain_ok = 0; int chain; int len = 1800; + int ret; - if (!caldata) + if (!caldata || !caldata->paprd_packet_sent || caldata->paprd_done) return; ath9k_ps_wakeup(sc); @@ -282,13 +283,6 @@ void ath_paprd_calibrate(struct work_struct *work) continue; chain_ok = 0; - - ath_dbg(common, CALIBRATE, - "Sending PAPRD frame for thermal measurement on chain %d\n", - chain); - if (!ath_paprd_send_frame(sc, skb, chain)) - goto fail_paprd; - ar9003_paprd_setup_gain_table(ah, chain); ath_dbg(common, CALIBRATE, @@ -302,7 +296,13 @@ void ath_paprd_calibrate(struct work_struct *work) break; } - if (ar9003_paprd_create_curve(ah, caldata, chain)) { + ret = ar9003_paprd_create_curve(ah, caldata, chain); + if (ret == -EINPROGRESS) { + ath_dbg(common, CALIBRATE, + "PAPRD curve on chain %d needs to be re-trained\n", + chain); + break; + } else if (ret) { ath_dbg(common, CALIBRATE, "PAPRD create curve failed on chain %d\n", chain); @@ -423,7 +423,7 @@ void ath_ani_calibrate(unsigned long data) cal_interval = min(cal_interval, (u32)short_cal_interval); mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval)); - if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) { + if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD) && ah->caldata) { if (!ah->caldata->paprd_done) ieee80211_queue_work(sc->hw, &sc->paprd_work); else if (!ah->paprd_table_write_done) diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 7990cd55599cd319a51537ed0ad1981b6edf9a4b..b42be910a83dc94845fa6be33370357b18416e2f 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -773,15 +773,10 @@ bool ath9k_hw_intrpend(struct ath_hw *ah) } EXPORT_SYMBOL(ath9k_hw_intrpend); -void ath9k_hw_disable_interrupts(struct ath_hw *ah) +void ath9k_hw_kill_interrupts(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); - if (!(ah->imask & ATH9K_INT_GLOBAL)) - atomic_set(&ah->intr_ref_cnt, -1); - else - atomic_dec(&ah->intr_ref_cnt); - ath_dbg(common, INTERRUPT, "disable IER\n"); REG_WRITE(ah, AR_IER, AR_IER_DISABLE); (void) REG_READ(ah, AR_IER); @@ -793,6 +788,17 @@ void ath9k_hw_disable_interrupts(struct ath_hw *ah) (void) REG_READ(ah, AR_INTR_SYNC_ENABLE); } } +EXPORT_SYMBOL(ath9k_hw_kill_interrupts); + +void ath9k_hw_disable_interrupts(struct ath_hw *ah) +{ + if (!(ah->imask & ATH9K_INT_GLOBAL)) + atomic_set(&ah->intr_ref_cnt, -1); + else + atomic_dec(&ah->intr_ref_cnt); + + ath9k_hw_kill_interrupts(ah); +} EXPORT_SYMBOL(ath9k_hw_disable_interrupts); void ath9k_hw_enable_interrupts(struct ath_hw *ah) diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h index 0eba36dca6f8fe897dcbbdc56cd0318af46f4fba..4a745e68dd941d9351e4fe911b47d76ec288551d 100644 --- a/drivers/net/wireless/ath/ath9k/mac.h +++ b/drivers/net/wireless/ath/ath9k/mac.h @@ -738,6 +738,7 @@ bool ath9k_hw_intrpend(struct ath_hw *ah); void ath9k_hw_set_interrupts(struct ath_hw *ah); void ath9k_hw_enable_interrupts(struct ath_hw *ah); void ath9k_hw_disable_interrupts(struct ath_hw *ah); +void ath9k_hw_kill_interrupts(struct ath_hw *ah); void ar9002_hw_attach_mac_ops(struct ath_hw *ah); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6049d8b82855a7542192b247657e58964fc9f496..a22df749b8db3d8641b4ef8cb78ad99b9e34adbb 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -462,8 +462,10 @@ irqreturn_t ath_isr(int irq, void *dev) if (!ath9k_hw_intrpend(ah)) return IRQ_NONE; - if(test_bit(SC_OP_HW_RESET, &sc->sc_flags)) + if (test_bit(SC_OP_HW_RESET, &sc->sc_flags)) { + ath9k_hw_kill_interrupts(ah); return IRQ_HANDLED; + } /* * Figure out the reason(s) for the interrupt. Note diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 87b89d55e637758febf06629599ebe9e60478b85..a978984d78a53e93b5148ed54271deedf7b1d25c 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -37,6 +37,7 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = { { PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E AR9485 */ { PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E AR9580 */ { PCI_VDEVICE(ATHEROS, 0x0034) }, /* PCI-E AR9462 */ + { PCI_VDEVICE(ATHEROS, 0x0037) }, /* PCI-E AR1111/AR9485 */ { 0 } }; @@ -320,6 +321,7 @@ static int ath_pci_suspend(struct device *device) * Otherwise the chip never moved to full sleep, * when no interface is up. */ + ath9k_stop_btcoex(sc); ath9k_hw_disable(sc->sc_ah); ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP); diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 12aca02228c22e9c8f5c62db20687c03f5992959..4480c0cc655f6f6ffca73774b2178e748936155e 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1044,7 +1044,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) struct ieee80211_hw *hw = sc->hw; struct ieee80211_hdr *hdr; int retval; - bool decrypt_error = false; struct ath_rx_status rs; enum ath9k_rx_qtype qtype; bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA); @@ -1066,6 +1065,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) tsf_lower = tsf & 0xffffffff; do { + bool decrypt_error = false; /* If handling rx interrupt and flush is in progress => exit */ if (test_bit(SC_OP_RXFLUSH, &sc->sc_flags) && (flush == 0)) break; diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 2c9da6b2ecb1b7b1141770f1240188bf2af50277..0d4155aec48d72196d5c64eee5c2517766760632 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2018,6 +2018,9 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, ath_dbg(common, XMIT, "TX complete: skb: %p\n", skb); + if (sc->sc_ah->caldata) + sc->sc_ah->caldata->paprd_packet_sent = true; + if (!(tx_flags & ATH_TX_ERROR)) /* Frame was ACKed */ tx_info->flags |= IEEE80211_TX_STAT_ACK; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index b80352b308d54dabbc414c0d765122470f888c47..a140165dfee0515b70263cddf6e7902f4171de48 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2719,32 +2719,37 @@ static int b43_gpio_init(struct b43_wldev *dev) if (dev->dev->chip_id == 0x4301) { mask |= 0x0060; set |= 0x0060; + } else if (dev->dev->chip_id == 0x5354) { + /* Don't allow overtaking buttons GPIOs */ + set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */ } - if (dev->dev->chip_id == 0x5354) - set &= 0xff02; + if (0 /* FIXME: conditional unknown */ ) { b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x0100); - mask |= 0x0180; - set |= 0x0180; + /* BT Coexistance Input */ + mask |= 0x0080; + set |= 0x0080; + /* BT Coexistance Out */ + mask |= 0x0100; + set |= 0x0100; } if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) { + /* PA is controlled by gpio 9, let ucode handle it */ b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x0200); mask |= 0x0200; set |= 0x0200; } - if (dev->dev->core_rev >= 2) - mask |= 0x0010; /* FIXME: This is redundant. */ switch (dev->dev->bus_type) { #ifdef CONFIG_B43_BCMA case B43_BUS_BCMA: bcma_cc_write32(&dev->dev->bdev->bus->drv_cc, BCMA_CC_GPIOCTL, (bcma_cc_read32(&dev->dev->bdev->bus->drv_cc, - BCMA_CC_GPIOCTL) & mask) | set); + BCMA_CC_GPIOCTL) & ~mask) | set); break; #endif #ifdef CONFIG_B43_SSB @@ -2753,7 +2758,7 @@ static int b43_gpio_init(struct b43_wldev *dev) if (gpiodev) ssb_write32(gpiodev, B43_GPIO_CONTROL, (ssb_read32(gpiodev, B43_GPIO_CONTROL) - & mask) | set); + & ~mask) | set); break; #endif } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 49765d34b4e0b43ac947aa360fb58d1fff88aa90..7c4ee72f9d56006cb7e069a9472a0524bbebb9c9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -638,6 +638,8 @@ static int brcmf_sdio_pd_probe(struct platform_device *pdev) oobirq_entry = kzalloc(sizeof(struct brcmf_sdio_oobirq), GFP_KERNEL); + if (!oobirq_entry) + return -ENOMEM; oobirq_entry->irq = res->start; oobirq_entry->flags = res->flags & IRQF_TRIGGER_MASK; list_add_tail(&oobirq_entry->list, &oobirq_lh); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c index 2621dd3d7dcd9d3b6ac5ca05db587cdd94454011..6f70953f0bade06ef046a845829a887611c0a8b8 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c @@ -764,8 +764,11 @@ static void brcmf_c_arp_offload_set(struct brcmf_pub *drvr, int arp_mode) { char iovbuf[32]; int retcode; + __le32 arp_mode_le; - brcmf_c_mkiovar("arp_ol", (char *)&arp_mode, 4, iovbuf, sizeof(iovbuf)); + arp_mode_le = cpu_to_le32(arp_mode); + brcmf_c_mkiovar("arp_ol", (char *)&arp_mode_le, 4, iovbuf, + sizeof(iovbuf)); retcode = brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, sizeof(iovbuf)); retcode = retcode >= 0 ? 0 : retcode; @@ -781,8 +784,11 @@ static void brcmf_c_arp_offload_enable(struct brcmf_pub *drvr, int arp_enable) { char iovbuf[32]; int retcode; + __le32 arp_enable_le; - brcmf_c_mkiovar("arpoe", (char *)&arp_enable, 4, + arp_enable_le = cpu_to_le32(arp_enable); + + brcmf_c_mkiovar("arpoe", (char *)&arp_enable_le, 4, iovbuf, sizeof(iovbuf)); retcode = brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, sizeof(iovbuf)); @@ -800,10 +806,10 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr) char iovbuf[BRCMF_EVENTING_MASK_LEN + 12]; /* Room for "event_msgs" + '\0' + bitvec */ char buf[128], *ptr; - u32 roaming = 1; - uint bcn_timeout = 3; - int scan_assoc_time = 40; - int scan_unassoc_time = 40; + __le32 roaming_le = cpu_to_le32(1); + __le32 bcn_timeout_le = cpu_to_le32(3); + __le32 scan_assoc_time_le = cpu_to_le32(40); + __le32 scan_unassoc_time_le = cpu_to_le32(40); int i; struct brcmf_bus_dcmd *cmdlst; struct list_head *cur, *q; @@ -829,14 +835,14 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr) /* Setup timeout if Beacons are lost and roam is off to report link down */ - brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout, 4, iovbuf, + brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout_le, 4, iovbuf, sizeof(iovbuf)); brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, sizeof(iovbuf)); /* Enable/Disable build-in roaming to allowed ext supplicant to take of romaing */ - brcmf_c_mkiovar("roam_off", (char *)&roaming, 4, + brcmf_c_mkiovar("roam_off", (char *)&roaming_le, 4, iovbuf, sizeof(iovbuf)); brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, sizeof(iovbuf)); @@ -848,9 +854,9 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr) sizeof(iovbuf)); brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_SCAN_CHANNEL_TIME, - (char *)&scan_assoc_time, sizeof(scan_assoc_time)); + (char *)&scan_assoc_time_le, sizeof(scan_assoc_time_le)); brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_SCAN_UNASSOC_TIME, - (char *)&scan_unassoc_time, sizeof(scan_unassoc_time)); + (char *)&scan_unassoc_time_le, sizeof(scan_unassoc_time_le)); /* Set and enable ARP offload feature */ brcmf_c_arp_offload_set(drvr, BRCMF_ARPOL_MODE); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 57bf1d7ee80fc76591621f51ffd4fbdf56a656b7..9ab24528f9b9c0e54d40854ae6e43e8ffd9f654c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -1188,7 +1188,7 @@ int brcmf_write_to_file(struct brcmf_pub *drvr, const u8 *buf, int size) kfree(buf); /* close file before return */ if (fp) - filp_close(fp, current->files); + filp_close(fp, NULL); /* restore previous address limit */ set_fs(old_fs); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index a299d42da8e74a358939b8fa5da8a32a01fd312b..58f89fa9c9f8a218ed29cfb93ad253c41471c648 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -519,7 +519,7 @@ static void brcmf_usb_tx_complete(struct urb *urb) else devinfo->bus_pub.bus->dstats.tx_errors++; - dev_kfree_skb(req->skb); + brcmu_pkt_buf_free_skb(req->skb); req->skb = NULL; brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req); @@ -540,7 +540,7 @@ static void brcmf_usb_rx_complete(struct urb *urb) devinfo->bus_pub.bus->dstats.rx_packets++; } else { devinfo->bus_pub.bus->dstats.rx_errors++; - dev_kfree_skb(skb); + brcmu_pkt_buf_free_skb(skb); brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req); return; } @@ -550,13 +550,15 @@ static void brcmf_usb_rx_complete(struct urb *urb) if (brcmf_proto_hdrpull(devinfo->dev, &ifidx, skb) != 0) { brcmf_dbg(ERROR, "rx protocol error\n"); brcmu_pkt_buf_free_skb(skb); + brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req); devinfo->bus_pub.bus->dstats.rx_errors++; } else { brcmf_rx_packet(devinfo->dev, ifidx, skb); brcmf_usb_rx_refill(devinfo, req); } } else { - dev_kfree_skb(skb); + brcmu_pkt_buf_free_skb(skb); + brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req); } return; @@ -581,14 +583,13 @@ static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo, usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->rx_pipe, skb->data, skb_tailroom(skb), brcmf_usb_rx_complete, req); - req->urb->transfer_flags |= URB_ZERO_PACKET; req->devinfo = devinfo; + brcmf_usb_enq(devinfo, &devinfo->rx_postq, req); ret = usb_submit_urb(req->urb, GFP_ATOMIC); - if (ret == 0) { - brcmf_usb_enq(devinfo, &devinfo->rx_postq, req); - } else { - dev_kfree_skb(req->skb); + if (ret) { + brcmf_usb_del_fromq(devinfo, req); + brcmu_pkt_buf_free_skb(req->skb); req->skb = NULL; brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req); } @@ -683,23 +684,22 @@ static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb) req = brcmf_usb_deq(devinfo, &devinfo->tx_freeq); if (!req) { + brcmu_pkt_buf_free_skb(skb); brcmf_dbg(ERROR, "no req to send\n"); return -ENOMEM; } - if (!req->urb) { - brcmf_dbg(ERROR, "no urb for req %p\n", req); - return -ENOBUFS; - } req->skb = skb; req->devinfo = devinfo; usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->tx_pipe, skb->data, skb->len, brcmf_usb_tx_complete, req); req->urb->transfer_flags |= URB_ZERO_PACKET; + brcmf_usb_enq(devinfo, &devinfo->tx_postq, req); ret = usb_submit_urb(req->urb, GFP_ATOMIC); - if (!ret) { - brcmf_usb_enq(devinfo, &devinfo->tx_postq, req); - } else { + if (ret) { + brcmf_dbg(ERROR, "brcmf_usb_tx usb_submit_urb FAILED\n"); + brcmf_usb_del_fromq(devinfo, req); + brcmu_pkt_buf_free_skb(req->skb); req->skb = NULL; brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 28c5fbb4af267b59ef1c8bab67f2d4ac2d7e9485..50b5553b6964b95dffecf40f4d28fdb91796efc8 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -500,8 +500,10 @@ static void wl_iscan_prep(struct brcmf_scan_params_le *params_le, params_le->active_time = cpu_to_le32(-1); params_le->passive_time = cpu_to_le32(-1); params_le->home_time = cpu_to_le32(-1); - if (ssid && ssid->SSID_len) - memcpy(¶ms_le->ssid_le, ssid, sizeof(struct brcmf_ssid)); + if (ssid && ssid->SSID_len) { + params_le->ssid_le.SSID_len = cpu_to_le32(ssid->SSID_len); + memcpy(¶ms_le->ssid_le.SSID, ssid->SSID, ssid->SSID_len); + } } static s32 @@ -1876,16 +1878,17 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, } if (test_bit(WL_STATUS_CONNECTED, &cfg_priv->status)) { - scb_val.val = cpu_to_le32(0); + memset(&scb_val, 0, sizeof(scb_val)); err = brcmf_exec_dcmd(ndev, BRCMF_C_GET_RSSI, &scb_val, sizeof(struct brcmf_scb_val_le)); - if (err) + if (err) { WL_ERR("Could not get rssi (%d)\n", err); - - rssi = le32_to_cpu(scb_val.val); - sinfo->filled |= STATION_INFO_SIGNAL; - sinfo->signal = rssi; - WL_CONN("RSSI %d dBm\n", rssi); + } else { + rssi = le32_to_cpu(scb_val.val); + sinfo->filled |= STATION_INFO_SIGNAL; + sinfo->signal = rssi; + WL_CONN("RSSI %d dBm\n", rssi); + } } done: diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index 9a4c63f927cb1817ee666cc070f14d1a810083c0..64a48f06d68bfa124c1687bc1fa81a799fb5be82 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -77,7 +77,7 @@ NL80211_RRF_NO_IBSS) static const struct ieee80211_regdomain brcms_regdom_x2 = { - .n_reg_rules = 7, + .n_reg_rules = 6, .alpha2 = "X2", .reg_rules = { BRCM_2GHZ_2412_2462, @@ -382,9 +382,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec, { struct brcms_c_info *wlc = wlc_cm->wlc; struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel; - const struct ieee80211_reg_rule *reg_rule; struct txpwr_limits txpwr; - int ret; brcms_c_channel_reg_limits(wlc_cm, chanspec, &txpwr); @@ -393,8 +391,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec, ); /* set or restore gmode as required by regulatory */ - ret = freq_reg_info(wlc->wiphy, ch->center_freq, 0, ®_rule); - if (!ret && (reg_rule->flags & NL80211_RRF_NO_OFDM)) + if (ch->flags & IEEE80211_CHAN_NO_OFDM) brcms_c_set_gmode(wlc, GMODE_LEGACY_B, false); else brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 9e79d47e077f34e8b980dc6a8689c0735bba93bc..a5edebeb0b4f7f748155551df76396602885078e 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -121,7 +121,8 @@ static struct ieee80211_channel brcms_2ghz_chantable[] = { IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(14, 2484, IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) + IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS | + IEEE80211_CHAN_NO_OFDM) }; static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = { @@ -1232,6 +1233,9 @@ uint brcms_reset(struct brcms_info *wl) /* dpc will not be rescheduled */ wl->resched = false; + /* inform publicly that interface is down */ + wl->pub->up = false; + return 0; } diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 95aa8e1683ecb4bdeb663e0cf605d699407b96f0..83324b3216527ec72195b35da104a4ce6c5ad6e1 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -2042,7 +2042,8 @@ static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status) return; } len = ETH_ALEN; - ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len); + ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, bssid, + &len); if (ret) { IPW_DEBUG_INFO("failed querying ordinals at line %d\n", __LINE__); diff --git a/drivers/net/wireless/iwlwifi/dvm/debugfs.c b/drivers/net/wireless/iwlwifi/dvm/debugfs.c index 46782f1102ac7c8e159c3ef764a54205326923fd..a47b306b522cd3a49fcbb1622083baacb245d621 100644 --- a/drivers/net/wireless/iwlwifi/dvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/dvm/debugfs.c @@ -124,6 +124,9 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file, const struct fw_img *img; size_t bufsz; + if (!iwl_is_ready_rf(priv)) + return -EAGAIN; + /* default is to dump the entire data segment */ if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) { priv->dbgfs_sram_offset = 0x800000; diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index 6fddd2785e6e1fc9e846cc7099c1bf6a6414804c..a82f46c10f5ec036ca07ae6bbfa139bb50ab8052 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -707,11 +707,14 @@ static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, */ static bool rs_use_green(struct ieee80211_sta *sta) { - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->ctx; - - return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) && - !(ctx->ht.non_gf_sta_present); + /* + * There's a bug somewhere in this code that causes the + * scaling to get stuck because GF+SGI can't be combined + * in SISO rates. Until we find that bug, disable GF, it + * has only limited benefit and we still interoperate with + * GF APs since we can always receive GF transmissions. + */ + return false; } /** diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index d9694c58208c38cd60575bb48f37bc75f42884bd..4ffc18dc3a5761cc6b63c5aa60691727459e5e27 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -350,7 +350,7 @@ int iwl_queue_space(const struct iwl_queue *q); /***************************************************** * Error handling ******************************************************/ -int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display); +int iwl_dump_fh(struct iwl_trans *trans, char **buf); void iwl_dump_csr(struct iwl_trans *trans); /***************************************************** diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 39a6ca1f009c39fdaf8c60775348f4790ede45dd..d1a61ba6247ab68a13e4cd8943959c92d0fa3452 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -555,7 +555,7 @@ static void iwl_irq_handle_error(struct iwl_trans *trans) } iwl_dump_csr(trans); - iwl_dump_fh(trans, NULL, false); + iwl_dump_fh(trans, NULL); iwl_op_mode_nic_error(trans->op_mode); } diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 939c2f78df5833cc1d203deabe311568dc7ff88c..dbeebef562d5ca0bca0c9b3ac391747ebfe02973 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1442,6 +1442,7 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) return err; err_free_irq: + trans_pcie->irq_requested = false; free_irq(trans_pcie->irq, trans); error: iwl_free_isr_ict(trans); @@ -1649,13 +1650,9 @@ static const char *get_fh_string(int cmd) #undef IWL_CMD } -int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display) +int iwl_dump_fh(struct iwl_trans *trans, char **buf) { int i; -#ifdef CONFIG_IWLWIFI_DEBUG - int pos = 0; - size_t bufsz = 0; -#endif static const u32 fh_tbl[] = { FH_RSCSR_CHNL0_STTS_WPTR_REG, FH_RSCSR_CHNL0_RBDCB_BASE_REG, @@ -1667,29 +1664,35 @@ int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display) FH_TSSR_TX_STATUS_REG, FH_TSSR_TX_ERROR_REG }; -#ifdef CONFIG_IWLWIFI_DEBUG - if (display) { - bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; + +#ifdef CONFIG_IWLWIFI_DEBUGFS + if (buf) { + int pos = 0; + size_t bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; + *buf = kmalloc(bufsz, GFP_KERNEL); if (!*buf) return -ENOMEM; + pos += scnprintf(*buf + pos, bufsz - pos, "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) pos += scnprintf(*buf + pos, bufsz - pos, " %34s: 0X%08x\n", get_fh_string(fh_tbl[i]), iwl_read_direct32(trans, fh_tbl[i])); - } + return pos; } #endif + IWL_ERR(trans, "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) IWL_ERR(trans, " %34s: 0X%08x\n", get_fh_string(fh_tbl[i]), iwl_read_direct32(trans, fh_tbl[i])); - } + return 0; } @@ -1982,11 +1985,11 @@ static ssize_t iwl_dbgfs_fh_reg_read(struct file *file, size_t count, loff_t *ppos) { struct iwl_trans *trans = file->private_data; - char *buf; + char *buf = NULL; int pos = 0; ssize_t ret = -EFAULT; - ret = pos = iwl_dump_fh(trans, &buf, true); + ret = pos = iwl_dump_fh(trans, &buf); if (buf) { ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index eb5de800ed9038109e9a80bfc9cd15863d3491e4..1c10b542ab231a45e5134a58ceb858c8ab82d331 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -1254,6 +1254,7 @@ static int lbs_associate(struct lbs_private *priv, netif_tx_wake_all_queues(priv->dev); } + kfree(cmd); done: lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); return ret; diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 76caebaa43977f722cbd707d666f1f014002792e..4cb234349fbfacc305b1565ed5f1a30ba16aa108 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -1314,6 +1314,7 @@ static void if_sdio_remove(struct sdio_func *func) kfree(packet); } + kfree(card); lbs_deb_leave(LBS_DEB_SDIO); } @@ -1325,6 +1326,11 @@ static int if_sdio_suspend(struct device *dev) mmc_pm_flag_t flags = sdio_get_host_pm_caps(func); + /* If we're powered off anyway, just let the mmc layer remove the + * card. */ + if (!lbs_iface_active(card->priv)) + return -ENOSYS; + dev_info(dev, "%s: suspend: PM flags = 0x%x\n", sdio_func_id(func), flags); diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index 55a77e41170acc93ea9c9e1302588b21159a517e..27980778d992db783e58f777446a1cc03d40c28c 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -10,6 +10,7 @@ #include #include #include +#include #ifdef CONFIG_OLPC #include diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 58048189bd24475f3ca18960822b6b18219e637c..fe1ea43c5149ef03e9ed0e2809695773fa2a576d 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -571,7 +571,10 @@ static int lbs_thread(void *data) netdev_info(dev, "Timeout submitting command 0x%04x\n", le16_to_cpu(cmdnode->cmdbuf->command)); lbs_complete_command(priv, cmdnode, -ETIMEDOUT); - if (priv->reset_card) + + /* Reset card, but only when it isn't in the process + * of being shutdown anyway. */ + if (!dev->dismantle && priv->reset_card) priv->reset_card(priv); } priv->cmd_timed_out = 0; diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index c68adec3cc8b6522678c98582c7781b885193849..565527aee0ea3f73caa832f336c0ded06a3b22d9 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -170,7 +170,20 @@ static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv, cmd_code = le16_to_cpu(host_cmd->command); cmd_size = le16_to_cpu(host_cmd->size); - skb_trim(cmd_node->cmd_skb, cmd_size); + /* Adjust skb length */ + if (cmd_node->cmd_skb->len > cmd_size) + /* + * cmd_size is less than sizeof(struct host_cmd_ds_command). + * Trim off the unused portion. + */ + skb_trim(cmd_node->cmd_skb, cmd_size); + else if (cmd_node->cmd_skb->len < cmd_size) + /* + * cmd_size is larger than sizeof(struct host_cmd_ds_command) + * because we have appended custom IE TLV. Increase skb length + * accordingly. + */ + skb_put(cmd_node->cmd_skb, cmd_size - cmd_node->cmd_skb->len); do_gettimeofday(&tstamp); dev_dbg(adapter->dev, "cmd: DNLD_CMD: (%lu.%lu): %#x, act %#x, len %d," diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 7f207b6e9552c3eb795c62dde4457d30a924fde9..effb044a8a9d5d8169be88744d561c62ac160165 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -42,7 +42,7 @@ MODULE_FIRMWARE("isl3887usb"); * whenever you add a new device. */ -static struct usb_device_id p54u_table[] __devinitdata = { +static struct usb_device_id p54u_table[] = { /* Version 1 devices (pci chip + net2280) */ {USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */ {USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */ diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 241162e8111d2584f0fca6f47819cf924cdf1157..7a4ae9ee1c63057b78d582fd3a94964a6fdea264 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -1803,6 +1803,7 @@ static struct ndis_80211_pmkid *update_pmkid(struct usbnet *usbdev, struct cfg80211_pmksa *pmksa, int max_pmkids) { + struct ndis_80211_pmkid *new_pmkids; int i, err, newlen; unsigned int count; @@ -1833,11 +1834,12 @@ static struct ndis_80211_pmkid *update_pmkid(struct usbnet *usbdev, /* add new pmkid */ newlen = sizeof(*pmkids) + (count + 1) * sizeof(pmkids->bssid_info[0]); - pmkids = krealloc(pmkids, newlen, GFP_KERNEL); - if (!pmkids) { + new_pmkids = krealloc(pmkids, newlen, GFP_KERNEL); + if (!new_pmkids) { err = -ENOMEM; goto error; } + pmkids = new_pmkids; pmkids->length = cpu_to_le32(newlen); pmkids->bssid_info_count = cpu_to_le32(count + 1); diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 8b9dbd76a25255634ad79338223739c939429d26..64328af496f598bb3280784b6d2adfd25ec5cc70 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1611,6 +1611,7 @@ static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Allocate eeprom data. @@ -1623,6 +1624,14 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; + /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®); + rt2x00_set_field32(®, GPIOCSR_BIT8, 1); + rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg); + /* * Initialize hw specifications. */ diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index d3a4a68cc439b22faea7f6e9d4899e9313e5a7e2..7564ae992b735179b15e24a3d616c5a71acb1aeb 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -670,6 +670,7 @@ #define GPIOCSR_BIT5 FIELD32(0x00000020) #define GPIOCSR_BIT6 FIELD32(0x00000040) #define GPIOCSR_BIT7 FIELD32(0x00000080) +#define GPIOCSR_BIT8 FIELD32(0x00000100) /* * BBPPCSR: BBP Pin control register. diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index d2cf8a4bc8b52fd985f4720df6bc20a9269069c3..3de0406735f6b7347b46cdf2305e413aaa17256d 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1929,6 +1929,7 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Allocate eeprom data. @@ -1941,6 +1942,14 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; + /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®); + rt2x00_set_field32(®, GPIOCSR_DIR0, 1); + rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg); + /* * Initialize hw specifications. */ diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 3aae36bb0a9e9f99cf89705bc2dca5022109824a..89fee311d8fda5ad07ae5ecd50fae567232aa35d 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -283,7 +283,7 @@ static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) u16 reg; rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®); - return rt2x00_get_field32(reg, MAC_CSR19_BIT7); + return rt2x00_get_field16(reg, MAC_CSR19_BIT7); } #ifdef CONFIG_RT2X00_LIB_LEDS @@ -1768,6 +1768,7 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u16 reg; /* * Allocate eeprom data. @@ -1780,6 +1781,14 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; + /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®); + rt2x00_set_field16(®, MAC_CSR19_BIT8, 0); + rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg); + /* * Initialize hw specifications. */ diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index b493306a7eede0888af2cccef613c6612b579514..196bd5103e4f5450483ce1e60449021bf6eafd2c 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -189,14 +189,15 @@ * MAC_CSR19: GPIO control register. */ #define MAC_CSR19 0x0426 -#define MAC_CSR19_BIT0 FIELD32(0x0001) -#define MAC_CSR19_BIT1 FIELD32(0x0002) -#define MAC_CSR19_BIT2 FIELD32(0x0004) -#define MAC_CSR19_BIT3 FIELD32(0x0008) -#define MAC_CSR19_BIT4 FIELD32(0x0010) -#define MAC_CSR19_BIT5 FIELD32(0x0020) -#define MAC_CSR19_BIT6 FIELD32(0x0040) -#define MAC_CSR19_BIT7 FIELD32(0x0080) +#define MAC_CSR19_BIT0 FIELD16(0x0001) +#define MAC_CSR19_BIT1 FIELD16(0x0002) +#define MAC_CSR19_BIT2 FIELD16(0x0004) +#define MAC_CSR19_BIT3 FIELD16(0x0008) +#define MAC_CSR19_BIT4 FIELD16(0x0010) +#define MAC_CSR19_BIT5 FIELD16(0x0020) +#define MAC_CSR19_BIT6 FIELD16(0x0040) +#define MAC_CSR19_BIT7 FIELD16(0x0080) +#define MAC_CSR19_BIT8 FIELD16(0x0100) /* * MAC_CSR20: LED control register. diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 88455b1b9fe05b299aff2cc667d3d90e7822855a..b93516d832fb5603e4bb3d287a4770c0c8de06ad 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -221,6 +221,67 @@ static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev, mutex_unlock(&rt2x00dev->csr_mutex); } +static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + int i, count; + + rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); + if (rt2x00_get_field32(reg, WLAN_EN)) + return 0; + + rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff); + rt2x00_set_field32(®, FRC_WL_ANT_SET, 1); + rt2x00_set_field32(®, WLAN_CLK_EN, 0); + rt2x00_set_field32(®, WLAN_EN, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + + udelay(REGISTER_BUSY_DELAY); + + count = 0; + do { + /* + * Check PLL_LD & XTAL_RDY. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, CMB_CTRL, ®); + if (rt2x00_get_field32(reg, PLL_LD) && + rt2x00_get_field32(reg, XTAL_RDY)) + break; + udelay(REGISTER_BUSY_DELAY); + } + + if (i >= REGISTER_BUSY_COUNT) { + + if (count >= 10) + return -EIO; + + rt2800_register_write(rt2x00dev, 0x58, 0x018); + udelay(REGISTER_BUSY_DELAY); + rt2800_register_write(rt2x00dev, 0x58, 0x418); + udelay(REGISTER_BUSY_DELAY); + rt2800_register_write(rt2x00dev, 0x58, 0x618); + udelay(REGISTER_BUSY_DELAY); + count++; + } else { + count = 0; + } + + rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); + rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0); + rt2x00_set_field32(®, WLAN_CLK_EN, 1); + rt2x00_set_field32(®, WLAN_RESET, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + udelay(10); + rt2x00_set_field32(®, WLAN_RESET, 0); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + udelay(10); + rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff); + } while (count != 0); + + return 0; +} + void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, const u8 command, const u8 token, const u8 arg0, const u8 arg1) @@ -400,6 +461,13 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, { unsigned int i; u32 reg; + int retval; + + if (rt2x00_rt(rt2x00dev, RT3290)) { + retval = rt2800_enable_wlan_rt3290(rt2x00dev); + if (retval) + return -EBUSY; + } /* * If driver doesn't wake up firmware here, @@ -4021,6 +4089,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) rt2800_register_write(rt2x00dev, LDO_CFG0, reg); msleep(1); rt2800_register_read(rt2x00dev, LDO_CFG0, ®); + rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0); rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); rt2800_register_write(rt2x00dev, LDO_CFG0, reg); } diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 235376e9cb04c0066032493f2d86b008d604c14c..4765bbd654cdcfeea617c84f9c755db05409600d 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -980,69 +980,10 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) return rt2800_validate_eeprom(rt2x00dev); } -static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - int i, count; - - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); - if (rt2x00_get_field32(reg, WLAN_EN)) - return 0; - - rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff); - rt2x00_set_field32(®, FRC_WL_ANT_SET, 1); - rt2x00_set_field32(®, WLAN_CLK_EN, 0); - rt2x00_set_field32(®, WLAN_EN, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - - udelay(REGISTER_BUSY_DELAY); - - count = 0; - do { - /* - * Check PLL_LD & XTAL_RDY. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, CMB_CTRL, ®); - if (rt2x00_get_field32(reg, PLL_LD) && - rt2x00_get_field32(reg, XTAL_RDY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - if (i >= REGISTER_BUSY_COUNT) { - - if (count >= 10) - return -EIO; - - rt2800_register_write(rt2x00dev, 0x58, 0x018); - udelay(REGISTER_BUSY_DELAY); - rt2800_register_write(rt2x00dev, 0x58, 0x418); - udelay(REGISTER_BUSY_DELAY); - rt2800_register_write(rt2x00dev, 0x58, 0x618); - udelay(REGISTER_BUSY_DELAY); - count++; - } else { - count = 0; - } - - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); - rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0); - rt2x00_set_field32(®, WLAN_CLK_EN, 1); - rt2x00_set_field32(®, WLAN_RESET, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - udelay(10); - rt2x00_set_field32(®, WLAN_RESET, 0); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - udelay(10); - rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff); - } while (count != 0); - - return 0; -} static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Allocate eeprom data. @@ -1055,6 +996,14 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; + /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); + rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1); + rt2x00pci_register_write(rt2x00dev, GPIO_CTRL_CFG, reg); + /* * Initialize hw specifications. */ @@ -1062,17 +1011,6 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; - /* - * In probe phase call rt2800_enable_wlan_rt3290 to enable wlan - * clk for rt3290. That avoid the MCU fail in start phase. - */ - if (rt2x00_rt(rt2x00dev, RT3290)) { - retval = rt2800_enable_wlan_rt3290(rt2x00dev); - - if (retval) - return retval; - } - /* * This device has multiple filters for control frames * and has a separate filter for PS Poll frames. diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 6cf336595e2544a5703612e5156af0559b5cc8ab..6b4226b716187ea037d2a1c84e012806649e8816 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -667,8 +667,16 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, skb_pull(entry->skb, RXINFO_DESC_SIZE); /* - * FIXME: we need to check for rx_pkt_len validity + * Check for rx_pkt_len validity. Return if invalid, leaving + * rxdesc->size zeroed out by the upper level. */ + if (unlikely(rx_pkt_len == 0 || + rx_pkt_len > entry->queue->data_size)) { + ERROR(entry->queue->rt2x00dev, + "Bad frame size %d, forcing to 0\n", rx_pkt_len); + return; + } + rxd = (__le32 *)(entry->skb->data + rx_pkt_len); /* @@ -736,6 +744,7 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Allocate eeprom data. @@ -748,6 +757,14 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; + /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); + rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1); + rt2x00usb_register_write(rt2x00dev, GPIO_CTRL_CFG, reg); + /* * Initialize hw specifications. */ @@ -1157,6 +1174,8 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x1690, 0x0744) }, { USB_DEVICE(0x1690, 0x0761) }, { USB_DEVICE(0x1690, 0x0764) }, + /* ASUS */ + { USB_DEVICE(0x0b05, 0x179d) }, /* Cisco */ { USB_DEVICE(0x167b, 0x4001) }, /* EnGenius */ @@ -1222,7 +1241,6 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0b05, 0x1760) }, { USB_DEVICE(0x0b05, 0x1761) }, { USB_DEVICE(0x0b05, 0x1790) }, - { USB_DEVICE(0x0b05, 0x179d) }, /* AzureWave */ { USB_DEVICE(0x13d3, 0x3262) }, { USB_DEVICE(0x13d3, 0x3284) }, diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index a6b88bd4a1a57d7f904c75faa62c95ea219be029..3f07e36f462b384565884580170faf7c3be2f25f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -629,7 +629,7 @@ void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp) */ if (unlikely(rxdesc.size == 0 || rxdesc.size > entry->queue->data_size)) { - WARNING(rt2x00dev, "Wrong frame size %d max %d.\n", + ERROR(rt2x00dev, "Wrong frame size %d max %d.\n", rxdesc.size, entry->queue->data_size); dev_kfree_skb(entry->skb); goto renew_skb; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index f32259686b45778b77630328e54e2c1298b18a84..b8ec96163922a11711a3d6800b9556052c1386fc 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2243,8 +2243,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) static void rt61pci_wakeup(struct rt2x00_dev *rt2x00dev) { - struct ieee80211_conf conf = { .flags = 0 }; - struct rt2x00lib_conf libconf = { .conf = &conf }; + struct rt2x00lib_conf libconf = { .conf = &rt2x00dev->hw->conf }; rt61pci_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS); } @@ -2833,6 +2832,7 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Disable power saving. @@ -2850,6 +2850,14 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; + /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); + rt2x00_set_field32(®, MAC_CSR13_BIT13, 1); + rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg); + /* * Initialize hw specifications. */ diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index e3cd6db76b0e561d481873d22c5637d3d1732446..8f3da5a56766f4c3293825c2d649078f4cb5455f 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -372,6 +372,7 @@ struct hw_pairwise_ta_entry { #define MAC_CSR13_BIT10 FIELD32(0x00000400) #define MAC_CSR13_BIT11 FIELD32(0x00000800) #define MAC_CSR13_BIT12 FIELD32(0x00001000) +#define MAC_CSR13_BIT13 FIELD32(0x00002000) /* * MAC_CSR14: LED control register. diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index ba6e434b859d66506c26c5f05b7d5a569403c9d9..248436c13ce04ae1f79312c6cbb1e16d8a4b5fc9 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2177,6 +2177,7 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Allocate eeprom data. @@ -2189,6 +2190,14 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; + /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®); + rt2x00_set_field32(®, MAC_CSR13_BIT15, 0); + rt2x00usb_register_write(rt2x00dev, MAC_CSR13, reg); + /* * Initialize hw specifications. */ diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index 9f6b470414d33a687c8795b380add18cd8efaeb4..df1cc116b83be891ee2ff20702260f5949d3d983 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -282,6 +282,9 @@ struct hw_pairwise_ta_entry { #define MAC_CSR13_BIT10 FIELD32(0x00000400) #define MAC_CSR13_BIT11 FIELD32(0x00000800) #define MAC_CSR13_BIT12 FIELD32(0x00001000) +#define MAC_CSR13_BIT13 FIELD32(0x00002000) +#define MAC_CSR13_BIT14 FIELD32(0x00004000) +#define MAC_CSR13_BIT15 FIELD32(0x00008000) /* * MAC_CSR14: LED control register. diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c index 71a30b026089eddf6bf08658cf7e3f628992dbc5..533024095c43ad48871868d8522c6953399eb86a 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c @@ -44,7 +44,7 @@ MODULE_AUTHOR("Larry Finger "); MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver"); MODULE_LICENSE("GPL"); -static struct usb_device_id rtl8187_table[] __devinitdata = { +static struct usb_device_id rtl8187_table[] = { /* Asus */ {USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187}, /* Belkin */ diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h index 04c3aef8a4f62e178fbac155a956c64c529b97c8..2925094b2d912529fb32dc5202487d1def6d9910 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h @@ -117,6 +117,7 @@ #define CHIP_VER_B BIT(4) #define CHIP_92C_BITMASK BIT(0) +#define CHIP_UNKNOWN BIT(7) #define CHIP_92C_1T2R 0x03 #define CHIP_92C 0x01 #define CHIP_88C 0x00 diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c index bd0da7ef290b3cf5cafafe4d56ec4c3d7cf33611..dd4bb0950a575ddd37c31489f10d2bacdaaab940 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c @@ -994,8 +994,16 @@ static enum version_8192c _rtl92ce_read_chip_version(struct ieee80211_hw *hw) version = (value32 & TYPE_ID) ? VERSION_A_CHIP_92C : VERSION_A_CHIP_88C; } else { - version = (value32 & TYPE_ID) ? VERSION_B_CHIP_92C : - VERSION_B_CHIP_88C; + version = (enum version_8192c) (CHIP_VER_B | + ((value32 & TYPE_ID) ? CHIP_92C_BITMASK : 0) | + ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0)); + if ((!IS_CHIP_VENDOR_UMC(version)) && (value32 & + CHIP_VER_RTL_MASK)) { + version = (enum version_8192c)(version | + ((((value32 & CHIP_VER_RTL_MASK) == BIT(12)) + ? CHIP_VENDOR_UMC_B_CUT : CHIP_UNKNOWN) | + CHIP_VENDOR_UMC)); + } } switch (version) { diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c index 3aa927f8b9b93bfbf0b12d9d0194966cd24900c8..7d8f96405f42068bafa9c08d7ec6a382f2e2c7f0 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c @@ -162,10 +162,12 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw) /* request fw */ if (IS_VENDOR_UMC_A_CUT(rtlhal->version) && - !IS_92C_SERIAL(rtlhal->version)) + !IS_92C_SERIAL(rtlhal->version)) { rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cfwU.bin"; - else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) + } else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) { rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cfwU_B.bin"; + pr_info("****** This B_CUT device may not work with kernels 3.6 and earlier\n"); + } rtlpriv->max_fw_size = 0x4000; pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name); diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 30899901aef56b00e05c5f062c86cabcb54127d8..650f79a1f2bd4a89cd96326d63c85982b24db0aa 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -57,8 +57,7 @@ static const struct ethtool_ops xennet_ethtool_ops; struct netfront_cb { - struct page *page; - unsigned offset; + int pull_to; }; #define NETFRONT_SKB_CB(skb) ((struct netfront_cb *)((skb)->cb)) @@ -867,15 +866,9 @@ static int handle_incoming_queue(struct net_device *dev, struct sk_buff *skb; while ((skb = __skb_dequeue(rxq)) != NULL) { - struct page *page = NETFRONT_SKB_CB(skb)->page; - void *vaddr = page_address(page); - unsigned offset = NETFRONT_SKB_CB(skb)->offset; - - memcpy(skb->data, vaddr + offset, - skb_headlen(skb)); + int pull_to = NETFRONT_SKB_CB(skb)->pull_to; - if (page != skb_frag_page(&skb_shinfo(skb)->frags[0])) - __free_page(page); + __pskb_pull_tail(skb, pull_to - skb_headlen(skb)); /* Ethernet work: Delayed to here as it peeks the header. */ skb->protocol = eth_type_trans(skb, dev); @@ -913,7 +906,6 @@ static int xennet_poll(struct napi_struct *napi, int budget) struct sk_buff_head errq; struct sk_buff_head tmpq; unsigned long flags; - unsigned int len; int err; spin_lock(&np->rx_lock); @@ -955,24 +947,13 @@ static int xennet_poll(struct napi_struct *napi, int budget) } } - NETFRONT_SKB_CB(skb)->page = - skb_frag_page(&skb_shinfo(skb)->frags[0]); - NETFRONT_SKB_CB(skb)->offset = rx->offset; - - len = rx->status; - if (len > RX_COPY_THRESHOLD) - len = RX_COPY_THRESHOLD; - skb_put(skb, len); + NETFRONT_SKB_CB(skb)->pull_to = rx->status; + if (NETFRONT_SKB_CB(skb)->pull_to > RX_COPY_THRESHOLD) + NETFRONT_SKB_CB(skb)->pull_to = RX_COPY_THRESHOLD; - if (rx->status > len) { - skb_shinfo(skb)->frags[0].page_offset = - rx->offset + len; - skb_frag_size_set(&skb_shinfo(skb)->frags[0], rx->status - len); - skb->data_len = rx->status - len; - } else { - __skb_fill_page_desc(skb, 0, NULL, 0, 0); - skb_shinfo(skb)->nr_frags = 0; - } + skb_shinfo(skb)->frags[0].page_offset = rx->offset; + skb_frag_size_set(&skb_shinfo(skb)->frags[0], rx->status); + skb->data_len = rx->status; i = xennet_fill_frags(np, skb, &tmpq); @@ -999,7 +980,7 @@ static int xennet_poll(struct napi_struct *napi, int budget) * receive throughout using the standard receive * buffer size was cut by 25%(!!!). */ - skb->truesize += skb->data_len - (RX_COPY_THRESHOLD - len); + skb->truesize += skb->data_len - RX_COPY_THRESHOLD; skb->len += skb->data_len; if (rx->flags & XEN_NETRXF_csum_blank) diff --git a/drivers/of/base.c b/drivers/of/base.c index c181b94abc363b64a4a38c2e39625b7564dc2267..d4a1c9a043e12d3572faefe9a9fd11a1683cdd97 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -363,6 +363,33 @@ struct device_node *of_get_next_child(const struct device_node *node, } EXPORT_SYMBOL(of_get_next_child); +/** + * of_get_next_available_child - Find the next available child node + * @node: parent node + * @prev: previous child of the parent node, or NULL to get first + * + * This function is like of_get_next_child(), except that it + * automatically skips any disabled nodes (i.e. status = "disabled"). + */ +struct device_node *of_get_next_available_child(const struct device_node *node, + struct device_node *prev) +{ + struct device_node *next; + + read_lock(&devtree_lock); + next = prev ? prev->sibling : node->child; + for (; next; next = next->sibling) { + if (!of_device_is_available(next)) + continue; + if (of_node_get(next)) + break; + } + of_node_put(prev); + read_unlock(&devtree_lock); + return next; +} +EXPORT_SYMBOL(of_get_next_available_child); + /** * of_find_node_by_path - Find a node matching a full OF path * @path: The full path to match diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index fbf7b26c7c8a5119c527c00a15a35539b4aa3a2b..c5792d622dc4528ba572632d39c7c1f1d7ae438d 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -266,8 +266,8 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) } if (!error) - dev_printk(KERN_INFO, &dev->dev, - "power state changed by ACPI to D%d\n", state); + dev_info(&dev->dev, "power state changed by ACPI to %s\n", + pci_power_name(state)); return error; } diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 185be37033430adf53d8a390fd34a4c9dfd6e446..d6fd6b6d9d4b575c26eb0041e503ddb10ddb9d64 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -280,8 +280,12 @@ static long local_pci_probe(void *_ddi) { struct drv_dev_and_id *ddi = _ddi; struct device *dev = &ddi->dev->dev; + struct device *parent = dev->parent; int rc; + /* The parent bridge must be in active state when probing */ + if (parent) + pm_runtime_get_sync(parent); /* Unbound PCI devices are always set to disabled and suspended. * During probe, the device is set to enabled and active and the * usage count is incremented. If the driver supports runtime PM, @@ -298,6 +302,8 @@ static long local_pci_probe(void *_ddi) pm_runtime_set_suspended(dev); pm_runtime_put_noidle(dev); } + if (parent) + pm_runtime_put(parent); return rc; } @@ -959,6 +965,13 @@ static int pci_pm_poweroff_noirq(struct device *dev) if (!pci_dev->state_saved && !pci_is_bridge(pci_dev)) pci_prepare_to_sleep(pci_dev); + /* + * The reason for doing this here is the same as for the analogous code + * in pci_pm_suspend_noirq(). + */ + if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI) + pci_write_config_word(pci_dev, PCI_COMMAND, 0); + return 0; } diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 6869009c7393f7081497c51901f11f31e62957bf..02d107b152818e948cc3e561d276bf24126ac997 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -458,6 +458,40 @@ boot_vga_show(struct device *dev, struct device_attribute *attr, char *buf) } struct device_attribute vga_attr = __ATTR_RO(boot_vga); +static void +pci_config_pm_runtime_get(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + + if (parent) + pm_runtime_get_sync(parent); + pm_runtime_get_noresume(dev); + /* + * pdev->current_state is set to PCI_D3cold during suspending, + * so wait until suspending completes + */ + pm_runtime_barrier(dev); + /* + * Only need to resume devices in D3cold, because config + * registers are still accessible for devices suspended but + * not in D3cold. + */ + if (pdev->current_state == PCI_D3cold) + pm_runtime_resume(dev); +} + +static void +pci_config_pm_runtime_put(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + + pm_runtime_put(dev); + if (parent) + pm_runtime_put_sync(parent); +} + static ssize_t pci_read_config(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, @@ -484,6 +518,8 @@ pci_read_config(struct file *filp, struct kobject *kobj, size = count; } + pci_config_pm_runtime_get(dev); + if ((off & 1) && size) { u8 val; pci_user_read_config_byte(dev, off, &val); @@ -529,6 +565,8 @@ pci_read_config(struct file *filp, struct kobject *kobj, --size; } + pci_config_pm_runtime_put(dev); + return count; } @@ -549,6 +587,8 @@ pci_write_config(struct file* filp, struct kobject *kobj, count = size; } + pci_config_pm_runtime_get(dev); + if ((off & 1) && size) { pci_user_write_config_byte(dev, off, data[off - init_off]); off++; @@ -587,6 +627,8 @@ pci_write_config(struct file* filp, struct kobject *kobj, --size; } + pci_config_pm_runtime_put(dev); + return count; } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index f3ea977a5b1bf6f458c8ed0757cd8e02cc1d3ff2..ab4bf5a4c2f12ee6dc90a83666d03387fc618fca 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1941,6 +1941,7 @@ void pci_pm_init(struct pci_dev *dev) dev->pm_cap = pm; dev->d3_delay = PCI_PM_D3_WAIT; dev->d3cold_delay = PCI_PM_D3COLD_WAIT; + dev->d3cold_allowed = true; dev->d1_support = false; dev->d2_support = false; diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 3a7eefcb270a5dda9a2dcbcead63086da4433c3e..e76b44777dbf7f2893ecdcde08997cad1d904eb4 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -140,9 +140,17 @@ static int pcie_port_runtime_resume(struct device *dev) { return 0; } + +static int pcie_port_runtime_idle(struct device *dev) +{ + /* Delay for a short while to prevent too frequent suspend/resume */ + pm_schedule_suspend(dev, 10); + return -EBUSY; +} #else #define pcie_port_runtime_suspend NULL #define pcie_port_runtime_resume NULL +#define pcie_port_runtime_idle NULL #endif static const struct dev_pm_ops pcie_portdrv_pm_ops = { @@ -155,6 +163,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = { .resume_noirq = pcie_port_resume_noirq, .runtime_suspend = pcie_port_runtime_suspend, .runtime_resume = pcie_port_runtime_resume, + .runtime_idle = pcie_port_runtime_idle, }; #define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops) @@ -200,6 +209,11 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev, return status; pci_save_state(dev); + /* + * D3cold may not work properly on some PCIe port, so disable + * it by default. + */ + dev->d3cold_allowed = false; if (!pci_match_id(port_runtime_pm_black_list, dev)) pm_runtime_put_noidle(&dev->dev); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 6c143b4497ca4381677dcc34459ecf269e5cdc88..9f8a6b79a8ecf22d604056a902e7ca7adee8520a 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -144,15 +144,13 @@ static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar) case PCI_BASE_ADDRESS_MEM_TYPE_32: break; case PCI_BASE_ADDRESS_MEM_TYPE_1M: - dev_info(&dev->dev, "1M mem BAR treated as 32-bit BAR\n"); + /* 1M mem BAR treated as 32-bit BAR */ break; case PCI_BASE_ADDRESS_MEM_TYPE_64: flags |= IORESOURCE_MEM_64; break; default: - dev_warn(&dev->dev, - "mem unknown type %x treated as 32-bit BAR\n", - mem_type); + /* mem unknown type treated as 32-bit BAR */ break; } return flags; @@ -173,9 +171,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, u32 l, sz, mask; u16 orig_cmd; struct pci_bus_region region; + bool bar_too_big = false, bar_disabled = false; mask = type ? PCI_ROM_ADDRESS_MASK : ~0; + /* No printks while decoding is disabled! */ if (!dev->mmio_always_on) { pci_read_config_word(dev, PCI_COMMAND, &orig_cmd); pci_write_config_word(dev, PCI_COMMAND, @@ -240,8 +240,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, goto fail; if ((sizeof(resource_size_t) < 8) && (sz64 > 0x100000000ULL)) { - dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n", - pos); + bar_too_big = true; goto fail; } @@ -252,12 +251,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, region.start = 0; region.end = sz64; pcibios_bus_to_resource(dev, res, ®ion); + bar_disabled = true; } else { region.start = l64; region.end = l64 + sz64; pcibios_bus_to_resource(dev, res, ®ion); - dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", - pos, res); } } else { sz = pci_size(l, sz, mask); @@ -268,18 +266,23 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, region.start = l; region.end = l + sz; pcibios_bus_to_resource(dev, res, ®ion); - - dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); } - out: + goto out; + + +fail: + res->flags = 0; +out: if (!dev->mmio_always_on) pci_write_config_word(dev, PCI_COMMAND, orig_cmd); + if (bar_too_big) + dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n", pos); + if (res->flags && !bar_disabled) + dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); + return (res->flags & IORESOURCE_MEM_64) ? 1 : 0; - fail: - res->flags = 0; - goto out; } static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index fb7f3bebdc69dadec1451773c596c9b901821265..dc5c126e398a0ac84fc13fa5f564d832ade0831e 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -657,11 +657,7 @@ static struct pinctrl *pinctrl_get_locked(struct device *dev) if (p != NULL) return ERR_PTR(-EBUSY); - p = create_pinctrl(dev); - if (IS_ERR(p)) - return p; - - return p; + return create_pinctrl(dev); } /** @@ -738,11 +734,8 @@ static struct pinctrl_state *pinctrl_lookup_state_locked(struct pinctrl *p, dev_dbg(p->dev, "using pinctrl dummy state (%s)\n", name); state = create_state(p, name); - if (IS_ERR(state)) - return state; - } else { - return ERR_PTR(-ENODEV); - } + } else + state = ERR_PTR(-ENODEV); } return state; diff --git a/drivers/pinctrl/pinctrl-imx23.c b/drivers/pinctrl/pinctrl-imx23.c index 75d3eff94296823e4959e63b6ec8c0531a129440..3674d877ed7c1db935b8e3831d60ea7b3e505c7f 100644 --- a/drivers/pinctrl/pinctrl-imx23.c +++ b/drivers/pinctrl/pinctrl-imx23.c @@ -292,7 +292,7 @@ static int __init imx23_pinctrl_init(void) { return platform_driver_register(&imx23_pinctrl_driver); } -arch_initcall(imx23_pinctrl_init); +postcore_initcall(imx23_pinctrl_init); static void __exit imx23_pinctrl_exit(void) { diff --git a/drivers/pinctrl/pinctrl-imx28.c b/drivers/pinctrl/pinctrl-imx28.c index b973026811a269978244a02177238d2f780726cf..0f5b2122b1bae358c8da2c1de90879a57a2a3911 100644 --- a/drivers/pinctrl/pinctrl-imx28.c +++ b/drivers/pinctrl/pinctrl-imx28.c @@ -408,7 +408,7 @@ static int __init imx28_pinctrl_init(void) { return platform_driver_register(&imx28_pinctrl_driver); } -arch_initcall(imx28_pinctrl_init); +postcore_initcall(imx28_pinctrl_init); static void __exit imx28_pinctrl_exit(void) { diff --git a/drivers/pinctrl/pinctrl-imx51.c b/drivers/pinctrl/pinctrl-imx51.c index 689b3c88dd2e723be68c5fd83a8bca99e9be78e8..9fd02162a3c21ec1ca810c163ab8c5143e1af41b 100644 --- a/drivers/pinctrl/pinctrl-imx51.c +++ b/drivers/pinctrl/pinctrl-imx51.c @@ -974,7 +974,7 @@ static struct imx_pin_reg imx51_pin_regs[] = { IMX_PIN_REG(MX51_PAD_EIM_DA13, NO_PAD, 0x050, 0, 0x000, 0), /* MX51_PAD_EIM_DA13__EIM_DA13 */ IMX_PIN_REG(MX51_PAD_EIM_DA14, NO_PAD, 0x054, 0, 0x000, 0), /* MX51_PAD_EIM_DA14__EIM_DA14 */ IMX_PIN_REG(MX51_PAD_EIM_DA15, NO_PAD, 0x058, 0, 0x000, 0), /* MX51_PAD_EIM_DA15__EIM_DA15 */ - IMX_PIN_REG(MX51_PAD_SD2_CMD, NO_PAD, 0x3b4, 2, 0x91c, 3), /* MX51_PAD_SD2_CMD__CSPI_MOSI */ + IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 2, 0x91c, 3), /* MX51_PAD_SD2_CMD__CSPI_MOSI */ IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 1, 0x9b0, 2), /* MX51_PAD_SD2_CMD__I2C1_SCL */ IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 0, 0x000, 0), /* MX51_PAD_SD2_CMD__SD2_CMD */ IMX_PIN_REG(MX51_PAD_SD2_CLK, 0x7c0, 0x3b8, 2, 0x914, 3), /* MX51_PAD_SD2_CLK__CSPI_SCLK */ diff --git a/drivers/pinctrl/pinctrl-nomadik-db8500.c b/drivers/pinctrl/pinctrl-nomadik-db8500.c index 6f99769c6733a946ad3a67311e23b246ad0aae74..a39fb7a6fc5142b86a65630bd5a208c84b94cd9a 100644 --- a/drivers/pinctrl/pinctrl-nomadik-db8500.c +++ b/drivers/pinctrl/pinctrl-nomadik-db8500.c @@ -505,6 +505,8 @@ static const unsigned kp_b_1_pins[] = { DB8500_PIN_F3, DB8500_PIN_F1, DB8500_PIN_J3, DB8500_PIN_H2, DB8500_PIN_J2, DB8500_PIN_H1, DB8500_PIN_F4, DB8500_PIN_E3, DB8500_PIN_E4, DB8500_PIN_D2, DB8500_PIN_C1, DB8500_PIN_D3, DB8500_PIN_C2, DB8500_PIN_D5 }; +static const unsigned kp_b_2_pins[] = { DB8500_PIN_F3, DB8500_PIN_F1, + DB8500_PIN_G3, DB8500_PIN_G2, DB8500_PIN_F4, DB8500_PIN_E3}; static const unsigned sm_b_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3, DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6, DB8500_PIN_D6, DB8500_PIN_B7, DB8500_PIN_D7, DB8500_PIN_D8, @@ -662,6 +664,7 @@ static const struct nmk_pingroup nmk_db8500_groups[] = { DB8500_PIN_GROUP(spi3_b_1, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(msp1txrx_b_1, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(kp_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(kp_b_2, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(sm_b_1, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(smcs0_b_1, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(smcs1_b_1, NMK_GPIO_ALT_B), @@ -751,7 +754,7 @@ DB8500_FUNC_GROUPS(msp1, "msp1txrx_a_1", "msp1_a_1", "msp1txrx_b_1"); DB8500_FUNC_GROUPS(lcdb, "lcdb_a_1"); DB8500_FUNC_GROUPS(lcd, "lcdvsi0_a_1", "lcdvsi1_a_1", "lcd_d0_d7_a_1", "lcd_d8_d11_a_1", "lcd_d12_d23_a_1", "lcd_b_1"); -DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_b_1", "kp_c_1", "kp_oc1_1"); +DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_b_1", "kp_b_2", "kp_c_1", "kp_oc1_1"); DB8500_FUNC_GROUPS(mc2, "mc2_a_1", "mc2rstn_c_1"); DB8500_FUNC_GROUPS(ssp1, "ssp1_a_1"); DB8500_FUNC_GROUPS(ssp0, "ssp0_a_1"); @@ -766,7 +769,7 @@ DB8500_FUNC_GROUPS(ipgpio, "ipgpio0_a_1", "ipgpio1_a_1", "ipgpio7_b_1", DB8500_FUNC_GROUPS(msp2, "msp2sck_a_1", "msp2_a_1"); DB8500_FUNC_GROUPS(mc4, "mc4_a_1", "mc4rstn_c_1"); DB8500_FUNC_GROUPS(mc1, "mc1_a_1", "mc1dir_a_1"); -DB8500_FUNC_GROUPS(hsi, "hsir1_a_1", "hsit1_a_1", "hsit_a_2"); +DB8500_FUNC_GROUPS(hsi, "hsir_a_1", "hsit_a_1", "hsit_a_2"); DB8500_FUNC_GROUPS(clkout, "clkout_a_1", "clkout_a_2", "clkout_c_1"); DB8500_FUNC_GROUPS(usb, "usb_a_1"); DB8500_FUNC_GROUPS(trig, "trig_b_1"); diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index 53b0d49a7a1c817a7316fc25e57fff3a5c5341bb..3dde6537adb878d7986a96b2dba528d41cf77d1a 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1292,7 +1292,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) NOMADIK_GPIO_TO_IRQ(pdata->first_gpio), 0, &nmk_gpio_irq_simple_ops, nmk_chip); if (!nmk_chip->domain) { - pr_err("%s: Failed to create irqdomain\n", np->full_name); + dev_err(&dev->dev, "failed to create irqdomain\n"); ret = -ENOSYS; goto out; } @@ -1731,7 +1731,6 @@ static int __devinit nmk_pinctrl_probe(struct platform_device *pdev) for (i = 0; i < npct->soc->gpio_num_ranges; i++) { if (!nmk_gpio_chips[i]) { dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i); - devm_kfree(&pdev->dev, npct); return -EPROBE_DEFER; } npct->soc->gpio_ranges[i].gc = &nmk_gpio_chips[i]->chip; diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c index 2aae8a8978e99b4224ef0f0baff84b5745e913dd..7fca6ce5952b94a0f398bd1bca35795e20ba62e0 100644 --- a/drivers/pinctrl/pinctrl-sirf.c +++ b/drivers/pinctrl/pinctrl-sirf.c @@ -1217,7 +1217,6 @@ static int __devinit sirfsoc_pinmux_probe(struct platform_device *pdev) iounmap(spmx->gpio_virtbase); out_no_gpio_remap: platform_set_drvdata(pdev, NULL); - devm_kfree(&pdev->dev, spmx); return ret; } diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c index a7ad8c112d91e21c9e0c930082a451d4b4921798..309f5b9a70ec74d4b5e1cca07b6e8e31836f53fa 100644 --- a/drivers/pinctrl/pinctrl-u300.c +++ b/drivers/pinctrl/pinctrl-u300.c @@ -1121,10 +1121,8 @@ static int __devinit u300_pmx_probe(struct platform_device *pdev) upmx->dev = &pdev->dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENOENT; - goto out_no_resource; - } + if (!res) + return -ENOENT; upmx->phybase = res->start; upmx->physize = resource_size(res); @@ -1165,8 +1163,6 @@ static int __devinit u300_pmx_probe(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); out_no_memregion: release_mem_region(upmx->phybase, upmx->physize); -out_no_resource: - devm_kfree(&pdev->dev, upmx); return ret; } diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile index 782953ae4c03789450050ad748d207a58550a900..b17c16ce54adabc1160474b9aaf3fc2342804308 100644 --- a/drivers/platform/Makefile +++ b/drivers/platform/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_X86) += x86/ +obj-$(CONFIG_OLPC) += olpc/ diff --git a/drivers/platform/olpc/Makefile b/drivers/platform/olpc/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..dc8b26bc72090405f318dd0792e2708bde457b25 --- /dev/null +++ b/drivers/platform/olpc/Makefile @@ -0,0 +1,4 @@ +# +# OLPC XO platform-specific drivers +# +obj-$(CONFIG_OLPC) += olpc-ec.o diff --git a/drivers/platform/olpc/olpc-ec.c b/drivers/platform/olpc/olpc-ec.c new file mode 100644 index 0000000000000000000000000000000000000000..0f9f8596b300a0d06d525547159bf4d038ba1505 --- /dev/null +++ b/drivers/platform/olpc/olpc-ec.c @@ -0,0 +1,336 @@ +/* + * Generic driver for the OLPC Embedded Controller. + * + * Copyright (C) 2011-2012 One Laptop per Child Foundation. + * + * Licensed under the GPL v2 or later. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct ec_cmd_desc { + u8 cmd; + u8 *inbuf, *outbuf; + size_t inlen, outlen; + + int err; + struct completion finished; + struct list_head node; + + void *priv; +}; + +struct olpc_ec_priv { + struct olpc_ec_driver *drv; + struct work_struct worker; + struct mutex cmd_lock; + + /* Pending EC commands */ + struct list_head cmd_q; + spinlock_t cmd_q_lock; + + struct dentry *dbgfs_dir; + + /* + * Running an EC command while suspending means we don't always finish + * the command before the machine suspends. This means that the EC + * is expecting the command protocol to finish, but we after a period + * of time (while the OS is asleep) the EC times out and restarts its + * idle loop. Meanwhile, the OS wakes up, thinks it's still in the + * middle of the command protocol, starts throwing random things at + * the EC... and everyone's uphappy. + */ + bool suspended; +}; + +static struct olpc_ec_driver *ec_driver; +static struct olpc_ec_priv *ec_priv; +static void *ec_cb_arg; + +void olpc_ec_driver_register(struct olpc_ec_driver *drv, void *arg) +{ + ec_driver = drv; + ec_cb_arg = arg; +} +EXPORT_SYMBOL_GPL(olpc_ec_driver_register); + +static void olpc_ec_worker(struct work_struct *w) +{ + struct olpc_ec_priv *ec = container_of(w, struct olpc_ec_priv, worker); + struct ec_cmd_desc *desc = NULL; + unsigned long flags; + + /* Grab the first pending command from the queue */ + spin_lock_irqsave(&ec->cmd_q_lock, flags); + if (!list_empty(&ec->cmd_q)) { + desc = list_first_entry(&ec->cmd_q, struct ec_cmd_desc, node); + list_del(&desc->node); + } + spin_unlock_irqrestore(&ec->cmd_q_lock, flags); + + /* Do we actually have anything to do? */ + if (!desc) + return; + + /* Protect the EC hw with a mutex; only run one cmd at a time */ + mutex_lock(&ec->cmd_lock); + desc->err = ec_driver->ec_cmd(desc->cmd, desc->inbuf, desc->inlen, + desc->outbuf, desc->outlen, ec_cb_arg); + mutex_unlock(&ec->cmd_lock); + + /* Finished, wake up olpc_ec_cmd() */ + complete(&desc->finished); + + /* Run the worker thread again in case there are more cmds pending */ + schedule_work(&ec->worker); +} + +/* + * Throw a cmd descripter onto the list. We now have SMP OLPC machines, so + * locking is pretty critical. + */ +static void queue_ec_descriptor(struct ec_cmd_desc *desc, + struct olpc_ec_priv *ec) +{ + unsigned long flags; + + INIT_LIST_HEAD(&desc->node); + + spin_lock_irqsave(&ec->cmd_q_lock, flags); + list_add_tail(&desc->node, &ec->cmd_q); + spin_unlock_irqrestore(&ec->cmd_q_lock, flags); + + schedule_work(&ec->worker); +} + +int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf, size_t outlen) +{ + struct olpc_ec_priv *ec = ec_priv; + struct ec_cmd_desc desc; + + /* Ensure a driver and ec hook have been registered */ + if (WARN_ON(!ec_driver || !ec_driver->ec_cmd)) + return -ENODEV; + + if (!ec) + return -ENOMEM; + + /* Suspending in the middle of a command hoses things really badly */ + if (WARN_ON(ec->suspended)) + return -EBUSY; + + might_sleep(); + + desc.cmd = cmd; + desc.inbuf = inbuf; + desc.outbuf = outbuf; + desc.inlen = inlen; + desc.outlen = outlen; + desc.err = 0; + init_completion(&desc.finished); + + queue_ec_descriptor(&desc, ec); + + /* Timeouts must be handled in the platform-specific EC hook */ + wait_for_completion(&desc.finished); + + /* The worker thread dequeues the cmd; no need to do anything here */ + return desc.err; +} +EXPORT_SYMBOL_GPL(olpc_ec_cmd); + +#ifdef CONFIG_DEBUG_FS + +/* + * debugfs support for "generic commands", to allow sending + * arbitrary EC commands from userspace. + */ + +#define EC_MAX_CMD_ARGS (5 + 1) /* cmd byte + 5 args */ +#define EC_MAX_CMD_REPLY (8) + +static DEFINE_MUTEX(ec_dbgfs_lock); +static unsigned char ec_dbgfs_resp[EC_MAX_CMD_REPLY]; +static unsigned int ec_dbgfs_resp_bytes; + +static ssize_t ec_dbgfs_cmd_write(struct file *file, const char __user *buf, + size_t size, loff_t *ppos) +{ + int i, m; + unsigned char ec_cmd[EC_MAX_CMD_ARGS]; + unsigned int ec_cmd_int[EC_MAX_CMD_ARGS]; + char cmdbuf[64]; + int ec_cmd_bytes; + + mutex_lock(&ec_dbgfs_lock); + + size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size); + + m = sscanf(cmdbuf, "%x:%u %x %x %x %x %x", &ec_cmd_int[0], + &ec_dbgfs_resp_bytes, &ec_cmd_int[1], &ec_cmd_int[2], + &ec_cmd_int[3], &ec_cmd_int[4], &ec_cmd_int[5]); + if (m < 2 || ec_dbgfs_resp_bytes > EC_MAX_CMD_REPLY) { + /* reset to prevent overflow on read */ + ec_dbgfs_resp_bytes = 0; + + pr_debug("olpc-ec: bad ec cmd: cmd:response-count [arg1 [arg2 ...]]\n"); + size = -EINVAL; + goto out; + } + + /* convert scanf'd ints to char */ + ec_cmd_bytes = m - 2; + for (i = 0; i <= ec_cmd_bytes; i++) + ec_cmd[i] = ec_cmd_int[i]; + + pr_debug("olpc-ec: debugfs cmd 0x%02x with %d args %02x %02x %02x %02x %02x, want %d returns\n", + ec_cmd[0], ec_cmd_bytes, ec_cmd[1], ec_cmd[2], + ec_cmd[3], ec_cmd[4], ec_cmd[5], ec_dbgfs_resp_bytes); + + olpc_ec_cmd(ec_cmd[0], (ec_cmd_bytes == 0) ? NULL : &ec_cmd[1], + ec_cmd_bytes, ec_dbgfs_resp, ec_dbgfs_resp_bytes); + + pr_debug("olpc-ec: response %02x %02x %02x %02x %02x %02x %02x %02x (%d bytes expected)\n", + ec_dbgfs_resp[0], ec_dbgfs_resp[1], ec_dbgfs_resp[2], + ec_dbgfs_resp[3], ec_dbgfs_resp[4], ec_dbgfs_resp[5], + ec_dbgfs_resp[6], ec_dbgfs_resp[7], + ec_dbgfs_resp_bytes); + +out: + mutex_unlock(&ec_dbgfs_lock); + return size; +} + +static ssize_t ec_dbgfs_cmd_read(struct file *file, char __user *buf, + size_t size, loff_t *ppos) +{ + unsigned int i, r; + char *rp; + char respbuf[64]; + + mutex_lock(&ec_dbgfs_lock); + rp = respbuf; + rp += sprintf(rp, "%02x", ec_dbgfs_resp[0]); + for (i = 1; i < ec_dbgfs_resp_bytes; i++) + rp += sprintf(rp, ", %02x", ec_dbgfs_resp[i]); + mutex_unlock(&ec_dbgfs_lock); + rp += sprintf(rp, "\n"); + + r = rp - respbuf; + return simple_read_from_buffer(buf, size, ppos, respbuf, r); +} + +static const struct file_operations ec_dbgfs_ops = { + .write = ec_dbgfs_cmd_write, + .read = ec_dbgfs_cmd_read, +}; + +static struct dentry *olpc_ec_setup_debugfs(void) +{ + struct dentry *dbgfs_dir; + + dbgfs_dir = debugfs_create_dir("olpc-ec", NULL); + if (IS_ERR_OR_NULL(dbgfs_dir)) + return NULL; + + debugfs_create_file("cmd", 0600, dbgfs_dir, NULL, &ec_dbgfs_ops); + + return dbgfs_dir; +} + +#else + +static struct dentry *olpc_ec_setup_debugfs(void) +{ + return NULL; +} + +#endif /* CONFIG_DEBUG_FS */ + +static int olpc_ec_probe(struct platform_device *pdev) +{ + struct olpc_ec_priv *ec; + int err; + + if (!ec_driver) + return -ENODEV; + + ec = kzalloc(sizeof(*ec), GFP_KERNEL); + if (!ec) + return -ENOMEM; + + ec->drv = ec_driver; + INIT_WORK(&ec->worker, olpc_ec_worker); + mutex_init(&ec->cmd_lock); + + INIT_LIST_HEAD(&ec->cmd_q); + spin_lock_init(&ec->cmd_q_lock); + + ec_priv = ec; + platform_set_drvdata(pdev, ec); + + err = ec_driver->probe ? ec_driver->probe(pdev) : 0; + if (err) { + ec_priv = NULL; + kfree(ec); + } else { + ec->dbgfs_dir = olpc_ec_setup_debugfs(); + } + + return err; +} + +static int olpc_ec_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct olpc_ec_priv *ec = platform_get_drvdata(pdev); + int err = 0; + + if (ec_driver->suspend) + err = ec_driver->suspend(pdev); + if (!err) + ec->suspended = true; + + return err; +} + +static int olpc_ec_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct olpc_ec_priv *ec = platform_get_drvdata(pdev); + + ec->suspended = false; + return ec_driver->resume ? ec_driver->resume(pdev) : 0; +} + +static const struct dev_pm_ops olpc_ec_pm_ops = { + .suspend_late = olpc_ec_suspend, + .resume_early = olpc_ec_resume, +}; + +static struct platform_driver olpc_ec_plat_driver = { + .probe = olpc_ec_probe, + .driver = { + .name = "olpc-ec", + .pm = &olpc_ec_pm_ops, + }, +}; + +static int __init olpc_ec_init_module(void) +{ + return platform_driver_register(&olpc_ec_plat_driver); +} + +module_init(olpc_ec_init_module); + +MODULE_AUTHOR("Andres Salomon "); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 2a262f5c5c0ca5753671f74903a2e49d8e65d382..c86bae828c28258e8c98d4801742af679f277879 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -289,6 +289,7 @@ config IDEAPAD_LAPTOP tristate "Lenovo IdeaPad Laptop Extras" depends on ACPI depends on RFKILL && INPUT + depends on SERIO_I8042 select INPUT_SPARSEKMAP help This is a driver for the rfkill switches on Lenovo IdeaPad netbooks. @@ -758,8 +759,11 @@ config SAMSUNG_Q10 config APPLE_GMUX tristate "Apple Gmux Driver" + depends on ACPI depends on PNP - select BACKLIGHT_CLASS_DEVICE + depends on BACKLIGHT_CLASS_DEVICE + depends on BACKLIGHT_APPLE=n || BACKLIGHT_APPLE + depends on ACPI_VIDEO=n || ACPI_VIDEO ---help--- This driver provides support for the gmux device found on many Apple laptops, which controls the display mux for the hybrid diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 3782e1cd3697020219d34b81aa039a8c767be486..934d861a32359bb553ce17966d152f089b31c04d 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -2196,10 +2196,8 @@ static int __init acer_wmi_init(void) interface->capability &= ~ACER_CAP_BRIGHTNESS; pr_info("Brightness must be controlled by acpi video driver\n"); } else { -#ifdef CONFIG_ACPI_VIDEO pr_info("Disabling ACPI video driver\n"); acpi_video_unregister(); -#endif } if (wmi_has_guid(WMID_GUID3)) { diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 905fa01ac8df7abe86893964fd50c15a96b3b5d6..db8f63841b4265922b5a630c020e00cb4f490ad3 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -2,6 +2,7 @@ * Gmux driver for Apple laptops * * Copyright (C) Canonical Ltd. + * Copyright (C) 2010-2012 Andreas Heider * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -18,16 +19,30 @@ #include #include #include +#include +#include +#include #include #include struct apple_gmux_data { unsigned long iostart; unsigned long iolen; + bool indexed; + struct mutex index_lock; struct backlight_device *bdev; + + /* switcheroo data */ + acpi_handle dhandle; + int gpe; + enum vga_switcheroo_client_id resume_client_id; + enum vga_switcheroo_state power_state; + struct completion powerchange_done; }; +static struct apple_gmux_data *apple_gmux_data; + /* * gmux port offsets. Many of these are not yet used, but may be in the * future, and it's useful to have them documented here anyhow. @@ -45,6 +60,9 @@ struct apple_gmux_data { #define GMUX_PORT_DISCRETE_POWER 0x50 #define GMUX_PORT_MAX_BRIGHTNESS 0x70 #define GMUX_PORT_BRIGHTNESS 0x74 +#define GMUX_PORT_VALUE 0xc2 +#define GMUX_PORT_READ 0xd0 +#define GMUX_PORT_WRITE 0xd4 #define GMUX_MIN_IO_LEN (GMUX_PORT_BRIGHTNESS + 4) @@ -59,22 +77,174 @@ struct apple_gmux_data { #define GMUX_BRIGHTNESS_MASK 0x00ffffff #define GMUX_MAX_BRIGHTNESS GMUX_BRIGHTNESS_MASK -static inline u8 gmux_read8(struct apple_gmux_data *gmux_data, int port) +static u8 gmux_pio_read8(struct apple_gmux_data *gmux_data, int port) { return inb(gmux_data->iostart + port); } -static inline void gmux_write8(struct apple_gmux_data *gmux_data, int port, +static void gmux_pio_write8(struct apple_gmux_data *gmux_data, int port, u8 val) { outb(val, gmux_data->iostart + port); } -static inline u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) +static u32 gmux_pio_read32(struct apple_gmux_data *gmux_data, int port) { return inl(gmux_data->iostart + port); } +static void gmux_pio_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + int i; + u8 tmpval; + + for (i = 0; i < 4; i++) { + tmpval = (val >> (i * 8)) & 0xff; + outb(tmpval, gmux_data->iostart + port + i); + } +} + +static int gmux_index_wait_ready(struct apple_gmux_data *gmux_data) +{ + int i = 200; + u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + + while (i && (gwr & 0x01)) { + inb(gmux_data->iostart + GMUX_PORT_READ); + gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + udelay(100); + i--; + } + + return !!i; +} + +static int gmux_index_wait_complete(struct apple_gmux_data *gmux_data) +{ + int i = 200; + u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + + while (i && !(gwr & 0x01)) { + gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + udelay(100); + i--; + } + + if (gwr & 0x01) + inb(gmux_data->iostart + GMUX_PORT_READ); + + return !!i; +} + +static u8 gmux_index_read8(struct apple_gmux_data *gmux_data, int port) +{ + u8 val; + + mutex_lock(&gmux_data->index_lock); + gmux_index_wait_ready(gmux_data); + outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); + gmux_index_wait_complete(gmux_data); + val = inb(gmux_data->iostart + GMUX_PORT_VALUE); + mutex_unlock(&gmux_data->index_lock); + + return val; +} + +static void gmux_index_write8(struct apple_gmux_data *gmux_data, int port, + u8 val) +{ + mutex_lock(&gmux_data->index_lock); + outb(val, gmux_data->iostart + GMUX_PORT_VALUE); + gmux_index_wait_ready(gmux_data); + outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE); + gmux_index_wait_complete(gmux_data); + mutex_unlock(&gmux_data->index_lock); +} + +static u32 gmux_index_read32(struct apple_gmux_data *gmux_data, int port) +{ + u32 val; + + mutex_lock(&gmux_data->index_lock); + gmux_index_wait_ready(gmux_data); + outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); + gmux_index_wait_complete(gmux_data); + val = inl(gmux_data->iostart + GMUX_PORT_VALUE); + mutex_unlock(&gmux_data->index_lock); + + return val; +} + +static void gmux_index_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + int i; + u8 tmpval; + + mutex_lock(&gmux_data->index_lock); + + for (i = 0; i < 4; i++) { + tmpval = (val >> (i * 8)) & 0xff; + outb(tmpval, gmux_data->iostart + GMUX_PORT_VALUE + i); + } + + gmux_index_wait_ready(gmux_data); + outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE); + gmux_index_wait_complete(gmux_data); + mutex_unlock(&gmux_data->index_lock); +} + +static u8 gmux_read8(struct apple_gmux_data *gmux_data, int port) +{ + if (gmux_data->indexed) + return gmux_index_read8(gmux_data, port); + else + return gmux_pio_read8(gmux_data, port); +} + +static void gmux_write8(struct apple_gmux_data *gmux_data, int port, u8 val) +{ + if (gmux_data->indexed) + gmux_index_write8(gmux_data, port, val); + else + gmux_pio_write8(gmux_data, port, val); +} + +static u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) +{ + if (gmux_data->indexed) + return gmux_index_read32(gmux_data, port); + else + return gmux_pio_read32(gmux_data, port); +} + +static void gmux_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + if (gmux_data->indexed) + gmux_index_write32(gmux_data, port, val); + else + gmux_pio_write32(gmux_data, port, val); +} + +static bool gmux_is_indexed(struct apple_gmux_data *gmux_data) +{ + u16 val; + + outb(0xaa, gmux_data->iostart + 0xcc); + outb(0x55, gmux_data->iostart + 0xcd); + outb(0x00, gmux_data->iostart + 0xce); + + val = inb(gmux_data->iostart + 0xcc) | + (inb(gmux_data->iostart + 0xcd) << 8); + + if (val == 0x55aa) + return true; + + return false; +} + static int gmux_get_brightness(struct backlight_device *bd) { struct apple_gmux_data *gmux_data = bl_get_data(bd); @@ -90,16 +260,7 @@ static int gmux_update_status(struct backlight_device *bd) if (bd->props.state & BL_CORE_SUSPENDED) return 0; - /* - * Older gmux versions require writing out lower bytes first then - * setting the upper byte to 0 to flush the values. Newer versions - * accept a single u32 write, but the old method also works, so we - * just use the old method for all gmux versions. - */ - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS, brightness); - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 1, brightness >> 8); - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 2, brightness >> 16); - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 3, 0); + gmux_write32(gmux_data, GMUX_PORT_BRIGHTNESS, brightness); return 0; } @@ -110,6 +271,146 @@ static const struct backlight_ops gmux_bl_ops = { .update_status = gmux_update_status, }; +static int gmux_switchto(enum vga_switcheroo_client_id id) +{ + if (id == VGA_SWITCHEROO_IGD) { + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 1); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DISPLAY, 2); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 2); + } else { + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 2); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DISPLAY, 3); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 3); + } + + return 0; +} + +static int gmux_set_discrete_state(struct apple_gmux_data *gmux_data, + enum vga_switcheroo_state state) +{ + INIT_COMPLETION(gmux_data->powerchange_done); + + if (state == VGA_SWITCHEROO_ON) { + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1); + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 3); + pr_debug("Discrete card powered up\n"); + } else { + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1); + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 0); + pr_debug("Discrete card powered down\n"); + } + + gmux_data->power_state = state; + + if (gmux_data->gpe >= 0 && + !wait_for_completion_interruptible_timeout(&gmux_data->powerchange_done, + msecs_to_jiffies(200))) + pr_warn("Timeout waiting for gmux switch to complete\n"); + + return 0; +} + +static int gmux_set_power_state(enum vga_switcheroo_client_id id, + enum vga_switcheroo_state state) +{ + if (id == VGA_SWITCHEROO_IGD) + return 0; + + return gmux_set_discrete_state(apple_gmux_data, state); +} + +static int gmux_get_client_id(struct pci_dev *pdev) +{ + /* + * Early Macbook Pros with switchable graphics use nvidia + * integrated graphics. Hardcode that the 9400M is integrated. + */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + return VGA_SWITCHEROO_IGD; + else if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && + pdev->device == 0x0863) + return VGA_SWITCHEROO_IGD; + else + return VGA_SWITCHEROO_DIS; +} + +static enum vga_switcheroo_client_id +gmux_active_client(struct apple_gmux_data *gmux_data) +{ + if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_DISPLAY) == 2) + return VGA_SWITCHEROO_IGD; + + return VGA_SWITCHEROO_DIS; +} + +static struct vga_switcheroo_handler gmux_handler = { + .switchto = gmux_switchto, + .power_state = gmux_set_power_state, + .get_client_id = gmux_get_client_id, +}; + +static inline void gmux_disable_interrupts(struct apple_gmux_data *gmux_data) +{ + gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE, + GMUX_INTERRUPT_DISABLE); +} + +static inline void gmux_enable_interrupts(struct apple_gmux_data *gmux_data) +{ + gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE, + GMUX_INTERRUPT_ENABLE); +} + +static inline u8 gmux_interrupt_get_status(struct apple_gmux_data *gmux_data) +{ + return gmux_read8(gmux_data, GMUX_PORT_INTERRUPT_STATUS); +} + +static void gmux_clear_interrupts(struct apple_gmux_data *gmux_data) +{ + u8 status; + + /* to clear interrupts write back current status */ + status = gmux_interrupt_get_status(gmux_data); + gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_STATUS, status); +} + +static void gmux_notify_handler(acpi_handle device, u32 value, void *context) +{ + u8 status; + struct pnp_dev *pnp = (struct pnp_dev *)context; + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + + status = gmux_interrupt_get_status(gmux_data); + gmux_disable_interrupts(gmux_data); + pr_debug("Notify handler called: status %d\n", status); + + gmux_clear_interrupts(gmux_data); + gmux_enable_interrupts(gmux_data); + + if (status & GMUX_INTERRUPT_STATUS_POWER) + complete(&gmux_data->powerchange_done); +} + +static int gmux_suspend(struct pnp_dev *pnp, pm_message_t state) +{ + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + gmux_data->resume_client_id = gmux_active_client(gmux_data); + gmux_disable_interrupts(gmux_data); + return 0; +} + +static int gmux_resume(struct pnp_dev *pnp) +{ + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + gmux_enable_interrupts(gmux_data); + gmux_switchto(gmux_data->resume_client_id); + if (gmux_data->power_state == VGA_SWITCHEROO_OFF) + gmux_set_discrete_state(gmux_data, gmux_data->power_state); + return 0; +} + static int __devinit gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) { @@ -119,6 +420,11 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, struct backlight_device *bdev; u8 ver_major, ver_minor, ver_release; int ret = -ENXIO; + acpi_status status; + unsigned long long gpe; + + if (apple_gmux_data) + return -EBUSY; gmux_data = kzalloc(sizeof(*gmux_data), GFP_KERNEL); if (!gmux_data) @@ -147,21 +453,32 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, } /* - * On some machines the gmux is in ACPI even thought the machine - * doesn't really have a gmux. Check for invalid version information - * to detect this. + * Invalid version information may indicate either that the gmux + * device isn't present or that it's a new one that uses indexed + * io */ + ver_major = gmux_read8(gmux_data, GMUX_PORT_VERSION_MAJOR); ver_minor = gmux_read8(gmux_data, GMUX_PORT_VERSION_MINOR); ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE); if (ver_major == 0xff && ver_minor == 0xff && ver_release == 0xff) { - pr_info("gmux device not present\n"); - ret = -ENODEV; - goto err_release; + if (gmux_is_indexed(gmux_data)) { + u32 version; + mutex_init(&gmux_data->index_lock); + gmux_data->indexed = true; + version = gmux_read32(gmux_data, + GMUX_PORT_VERSION_MAJOR); + ver_major = (version >> 24) & 0xff; + ver_minor = (version >> 16) & 0xff; + ver_release = (version >> 8) & 0xff; + } else { + pr_info("gmux device not present\n"); + ret = -ENODEV; + goto err_release; + } } - - pr_info("Found gmux version %d.%d.%d\n", ver_major, ver_minor, - ver_release); + pr_info("Found gmux version %d.%d.%d [%s]\n", ver_major, ver_minor, + ver_release, (gmux_data->indexed ? "indexed" : "classic")); memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_PLATFORM; @@ -194,13 +511,65 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, * Disable the other backlight choices. */ acpi_video_dmi_promote_vendor(); -#ifdef CONFIG_ACPI_VIDEO acpi_video_unregister(); -#endif apple_bl_unregister(); + gmux_data->power_state = VGA_SWITCHEROO_ON; + + gmux_data->dhandle = DEVICE_ACPI_HANDLE(&pnp->dev); + if (!gmux_data->dhandle) { + pr_err("Cannot find acpi handle for pnp device %s\n", + dev_name(&pnp->dev)); + ret = -ENODEV; + goto err_notify; + } + + status = acpi_evaluate_integer(gmux_data->dhandle, "GMGP", NULL, &gpe); + if (ACPI_SUCCESS(status)) { + gmux_data->gpe = (int)gpe; + + status = acpi_install_notify_handler(gmux_data->dhandle, + ACPI_DEVICE_NOTIFY, + &gmux_notify_handler, pnp); + if (ACPI_FAILURE(status)) { + pr_err("Install notify handler failed: %s\n", + acpi_format_exception(status)); + ret = -ENODEV; + goto err_notify; + } + + status = acpi_enable_gpe(NULL, gmux_data->gpe); + if (ACPI_FAILURE(status)) { + pr_err("Cannot enable gpe: %s\n", + acpi_format_exception(status)); + goto err_enable_gpe; + } + } else { + pr_warn("No GPE found for gmux\n"); + gmux_data->gpe = -1; + } + + if (vga_switcheroo_register_handler(&gmux_handler)) { + ret = -ENODEV; + goto err_register_handler; + } + + init_completion(&gmux_data->powerchange_done); + apple_gmux_data = gmux_data; + gmux_enable_interrupts(gmux_data); + return 0; +err_register_handler: + if (gmux_data->gpe >= 0) + acpi_disable_gpe(NULL, gmux_data->gpe); +err_enable_gpe: + if (gmux_data->gpe >= 0) + acpi_remove_notify_handler(gmux_data->dhandle, + ACPI_DEVICE_NOTIFY, + &gmux_notify_handler); +err_notify: + backlight_device_unregister(bdev); err_release: release_region(gmux_data->iostart, gmux_data->iolen); err_free: @@ -212,14 +581,23 @@ static void __devexit gmux_remove(struct pnp_dev *pnp) { struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + vga_switcheroo_unregister_handler(); + gmux_disable_interrupts(gmux_data); + if (gmux_data->gpe >= 0) { + acpi_disable_gpe(NULL, gmux_data->gpe); + acpi_remove_notify_handler(gmux_data->dhandle, + ACPI_DEVICE_NOTIFY, + &gmux_notify_handler); + } + backlight_device_unregister(gmux_data->bdev); + release_region(gmux_data->iostart, gmux_data->iolen); + apple_gmux_data = NULL; kfree(gmux_data); acpi_video_dmi_demote_vendor(); -#ifdef CONFIG_ACPI_VIDEO acpi_video_register(); -#endif apple_bl_register(); } @@ -233,6 +611,8 @@ static struct pnp_driver gmux_pnp_driver = { .probe = gmux_probe, .remove = __devexit_p(gmux_remove), .id_table = gmux_device_ids, + .suspend = gmux_suspend, + .resume = gmux_resume }; static int __init apple_gmux_init(void) diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index e38f91be0b10964c12f6a9b8eb4347908fc54d94..4b568df56643f846de78a3228582342fb3a89c67 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -85,7 +85,7 @@ static char *wled_type = "unknown"; static char *bled_type = "unknown"; module_param(wled_type, charp, 0444); -MODULE_PARM_DESC(wlan_status, "Set the wled type on boot " +MODULE_PARM_DESC(wled_type, "Set the wled type on boot " "(unknown, led or rfkill). " "default is unknown"); @@ -863,9 +863,9 @@ static ssize_t show_infos(struct device *dev, * The significance of others is yet to be found. * If we don't find the method, we assume the device are present. */ - rv = acpi_evaluate_integer(asus->handle, "HRWS", NULL, &temp); + rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp); if (!ACPI_FAILURE(rv)) - len += sprintf(page + len, "HRWS value : %#x\n", + len += sprintf(page + len, "HWRS value : %#x\n", (uint) temp); /* * Another value for userspace: the ASYM method returns 0x02 for @@ -1751,9 +1751,9 @@ static int asus_laptop_get_info(struct asus_laptop *asus) * The significance of others is yet to be found. */ status = - acpi_evaluate_integer(asus->handle, "HRWS", NULL, &hwrs_result); + acpi_evaluate_integer(asus->handle, "HWRS", NULL, &hwrs_result); if (!ACPI_FAILURE(status)) - pr_notice(" HRWS returned %x", (int)hwrs_result); + pr_notice(" HWRS returned %x", (int)hwrs_result); if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL)) asus->have_rsts = true; diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index c7a36f6b058048eb092717eff06a9e413a6a2546..c0e9ff489b2417f2469e7abc7d2289e4b971c8a2 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -47,9 +47,7 @@ #include #include #include -#ifdef CONFIG_ACPI_VIDEO #include -#endif #include "asus-wmi.h" @@ -101,6 +99,7 @@ MODULE_LICENSE("GPL"); #define ASUS_WMI_DEVID_WIRELESS_LED 0x00010002 #define ASUS_WMI_DEVID_CWAP 0x00010003 #define ASUS_WMI_DEVID_WLAN 0x00010011 +#define ASUS_WMI_DEVID_WLAN_LED 0x00010012 #define ASUS_WMI_DEVID_BLUETOOTH 0x00010013 #define ASUS_WMI_DEVID_GPS 0x00010015 #define ASUS_WMI_DEVID_WIMAX 0x00010017 @@ -731,8 +730,21 @@ static int asus_rfkill_set(void *data, bool blocked) { struct asus_rfkill *priv = data; u32 ctrl_param = !blocked; + u32 dev_id = priv->dev_id; - return asus_wmi_set_devstate(priv->dev_id, ctrl_param, NULL); + /* + * If the user bit is set, BIOS can't set and record the wlan status, + * it will report the value read from id ASUS_WMI_DEVID_WLAN_LED + * while we query the wlan status through WMI(ASUS_WMI_DEVID_WLAN). + * So, we have to record wlan status in id ASUS_WMI_DEVID_WLAN_LED + * while setting the wlan status through WMI. + * This is also the behavior that windows app will do. + */ + if ((dev_id == ASUS_WMI_DEVID_WLAN) && + priv->asus->driver->wlan_ctrl_by_user) + dev_id = ASUS_WMI_DEVID_WLAN_LED; + + return asus_wmi_set_devstate(dev_id, ctrl_param, NULL); } static void asus_rfkill_query(struct rfkill *rfkill, void *data) @@ -1653,6 +1665,7 @@ static int asus_wmi_add(struct platform_device *pdev) struct asus_wmi *asus; acpi_status status; int err; + u32 result; asus = kzalloc(sizeof(struct asus_wmi), GFP_KERNEL); if (!asus) @@ -1689,10 +1702,8 @@ static int asus_wmi_add(struct platform_device *pdev) if (asus->driver->quirks->wmi_backlight_power) acpi_video_dmi_promote_vendor(); if (!acpi_video_backlight_support()) { -#ifdef CONFIG_ACPI_VIDEO pr_info("Disabling ACPI video driver\n"); acpi_video_unregister(); -#endif err = asus_wmi_backlight_init(asus); if (err && err != -ENODEV) goto fail_backlight; @@ -1711,6 +1722,10 @@ static int asus_wmi_add(struct platform_device *pdev) if (err) goto fail_debugfs; + asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_WLAN, &result); + if (result & (ASUS_WMI_DSTS_PRESENCE_BIT | ASUS_WMI_DSTS_USER_BIT)) + asus->driver->wlan_ctrl_by_user = 1; + return 0; fail_debugfs: diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h index 9c1da8b81bea50f9007eac48f82da8f0bb29a73d..4c9bd38bb0a26141c27ceca8749358cf60da1cfb 100644 --- a/drivers/platform/x86/asus-wmi.h +++ b/drivers/platform/x86/asus-wmi.h @@ -46,6 +46,7 @@ struct quirk_entry { struct asus_wmi_driver { int brightness; int panel_power; + int wlan_ctrl_by_user; const char *name; struct module *owner; diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c index 2ca7dd1ab3e452e49eb0c25561274cea435acbcf..c87ff16873f9753ef589111763d743bc09ed1409 100644 --- a/drivers/platform/x86/classmate-laptop.c +++ b/drivers/platform/x86/classmate-laptop.c @@ -350,6 +350,7 @@ static void cmpc_accel_idev_init_v4(struct input_dev *inputdev) inputdev->close = cmpc_accel_close_v4; } +#ifdef CONFIG_PM_SLEEP static int cmpc_accel_suspend_v4(struct device *dev) { struct input_dev *inputdev; @@ -384,6 +385,7 @@ static int cmpc_accel_resume_v4(struct device *dev) return 0; } +#endif static int cmpc_accel_add_v4(struct acpi_device *acpi) { @@ -723,8 +725,10 @@ static void cmpc_tablet_handler(struct acpi_device *dev, u32 event) struct input_dev *inputdev = dev_get_drvdata(&dev->dev); if (event == 0x81) { - if (ACPI_SUCCESS(cmpc_get_tablet(dev->handle, &val))) + if (ACPI_SUCCESS(cmpc_get_tablet(dev->handle, &val))) { input_report_switch(inputdev, SW_TABLET_MODE, !val); + input_sync(inputdev); + } } } @@ -737,8 +741,10 @@ static void cmpc_tablet_idev_init(struct input_dev *inputdev) set_bit(SW_TABLET_MODE, inputdev->swbit); acpi = to_acpi_device(inputdev->dev.parent); - if (ACPI_SUCCESS(cmpc_get_tablet(acpi->handle, &val))) + if (ACPI_SUCCESS(cmpc_get_tablet(acpi->handle, &val))) { input_report_switch(inputdev, SW_TABLET_MODE, !val); + input_sync(inputdev); + } } static int cmpc_tablet_add(struct acpi_device *acpi) @@ -752,15 +758,19 @@ static int cmpc_tablet_remove(struct acpi_device *acpi, int type) return cmpc_remove_acpi_notify_device(acpi); } +#ifdef CONFIG_PM_SLEEP static int cmpc_tablet_resume(struct device *dev) { struct input_dev *inputdev = dev_get_drvdata(dev); unsigned long long val = 0; - if (ACPI_SUCCESS(cmpc_get_tablet(to_acpi_device(dev)->handle, &val))) + if (ACPI_SUCCESS(cmpc_get_tablet(to_acpi_device(dev)->handle, &val))) { input_report_switch(inputdev, SW_TABLET_MODE, !val); + input_sync(inputdev); + } return 0; } +#endif static SIMPLE_DEV_PM_OPS(cmpc_tablet_pm, NULL, cmpc_tablet_resume); diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 4e96e8c0b60f83dfb04e835fe0ec4ed40fddb6a6..927c33af67ecc994b46ae2802a25f1cd5bfac5ed 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -211,7 +211,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 5420", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 5420"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5420"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -220,7 +220,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 5520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 5520"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5520"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -229,7 +229,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 5720", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 5720"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5720"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -238,7 +238,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 7420", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 7420"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7420"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -247,7 +247,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 7520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 7520"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7520"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -256,7 +256,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 7720", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 7720"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7720"), }, .driver_data = &quirk_dell_vostro_v130, }, diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index dab91b48d22cf5fbb955efd7ecb5fc0f6fa318c1..5ca264179f4e32a758102b0a05f865164250534b 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -610,12 +610,12 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle) if (!bus) { pr_warn("Unable to find PCI bus 1?\n"); - goto out_unlock; + goto out_put_dev; } if (pci_bus_read_config_dword(bus, 0, PCI_VENDOR_ID, &l)) { pr_err("Unable to read PCI config space?\n"); - goto out_unlock; + goto out_put_dev; } absent = (l == 0xffffffff); @@ -627,7 +627,7 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle) absent ? "absent" : "present"); pr_warn("skipped wireless hotplug as probably " "inappropriate for this model\n"); - goto out_unlock; + goto out_put_dev; } if (!blocked) { @@ -635,7 +635,7 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle) if (dev) { /* Device already present */ pci_dev_put(dev); - goto out_unlock; + goto out_put_dev; } dev = pci_scan_single_device(bus, 0); if (dev) { @@ -650,6 +650,8 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle) pci_dev_put(dev); } } +out_put_dev: + pci_dev_put(port); } out_unlock: diff --git a/drivers/platform/x86/fujitsu-tablet.c b/drivers/platform/x86/fujitsu-tablet.c index d2e41735a47b2d6178ef290211e0d13373ece570..7acae3f85f3b180cfe57865e08bb4fbf08bde40d 100644 --- a/drivers/platform/x86/fujitsu-tablet.c +++ b/drivers/platform/x86/fujitsu-tablet.c @@ -440,11 +440,13 @@ static int __devexit acpi_fujitsu_remove(struct acpi_device *adev, int type) return 0; } +#ifdef CONFIG_PM_SLEEP static int acpi_fujitsu_resume(struct device *dev) { fujitsu_reset(); return 0; } +#endif static SIMPLE_DEV_PM_OPS(acpi_fujitsu_pm, NULL, acpi_fujitsu_resume); diff --git a/drivers/platform/x86/hdaps.c b/drivers/platform/x86/hdaps.c index d9ab6f64dcec0185148075dca8f4ef8fda1319bf..777c7e3dda51ccb73dd6939717d95904ae5753cc 100644 --- a/drivers/platform/x86/hdaps.c +++ b/drivers/platform/x86/hdaps.c @@ -305,10 +305,12 @@ static int hdaps_probe(struct platform_device *dev) return 0; } +#ifdef CONFIG_PM_SLEEP static int hdaps_resume(struct device *dev) { return hdaps_device_init(); } +#endif static SIMPLE_DEV_PM_OPS(hdaps_pm, NULL, hdaps_resume); diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c index f4d91154ad67cca5d260cc681c5f7464dea0e87c..6b9af989632b72a9f2c0b1641a5fdd5600844de0 100644 --- a/drivers/platform/x86/hp_accel.c +++ b/drivers/platform/x86/hp_accel.c @@ -352,7 +352,7 @@ static int lis3lv02d_remove(struct acpi_device *device, int type) } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int lis3lv02d_suspend(struct device *dev) { /* make sure the device is off when we suspend */ diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 17f6dfd8dbfb093a332d7d9d9ebd572df9b850e7..dae7abe1d711487ce3499232f809f28bc3983232 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -36,6 +36,7 @@ #include #include #include +#include #define IDEAPAD_RFKILL_DEV_NUM (3) @@ -63,8 +64,11 @@ enum { VPCCMD_R_3G, VPCCMD_W_3G, VPCCMD_R_ODD, /* 0x21 */ - VPCCMD_R_RF = 0x23, + VPCCMD_W_FAN, + VPCCMD_R_RF, VPCCMD_W_RF, + VPCCMD_R_FAN = 0x2B, + VPCCMD_R_SPECIAL_BUTTONS = 0x31, VPCCMD_W_BL_POWER = 0x33, }; @@ -356,14 +360,46 @@ static ssize_t store_ideapad_cam(struct device *dev, return -EINVAL; ret = write_ec_cmd(ideapad_handle, VPCCMD_W_CAMERA, state); if (ret < 0) - return ret; + return -EIO; return count; } static DEVICE_ATTR(camera_power, 0644, show_ideapad_cam, store_ideapad_cam); +static ssize_t show_ideapad_fan(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + unsigned long result; + + if (read_ec_data(ideapad_handle, VPCCMD_R_FAN, &result)) + return sprintf(buf, "-1\n"); + return sprintf(buf, "%lu\n", result); +} + +static ssize_t store_ideapad_fan(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret, state; + + if (!count) + return 0; + if (sscanf(buf, "%i", &state) != 1) + return -EINVAL; + if (state < 0 || state > 4 || state == 3) + return -EINVAL; + ret = write_ec_cmd(ideapad_handle, VPCCMD_W_FAN, state); + if (ret < 0) + return -EIO; + return count; +} + +static DEVICE_ATTR(fan_mode, 0644, show_ideapad_fan, store_ideapad_fan); + static struct attribute *ideapad_attributes[] = { &dev_attr_camera_power.attr, + &dev_attr_fan_mode.attr, NULL }; @@ -377,7 +413,10 @@ static umode_t ideapad_is_visible(struct kobject *kobj, if (attr == &dev_attr_camera_power.attr) supported = test_bit(CFG_CAMERA_BIT, &(priv->cfg)); - else + else if (attr == &dev_attr_fan_mode.attr) { + unsigned long value; + supported = !read_ec_data(ideapad_handle, VPCCMD_R_FAN, &value); + } else supported = true; return supported ? attr->mode : 0; @@ -518,9 +557,15 @@ static void ideapad_platform_exit(struct ideapad_private *priv) */ static const struct key_entry ideapad_keymap[] = { { KE_KEY, 6, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 7, { KEY_CAMERA } }, + { KE_KEY, 11, { KEY_F16 } }, { KE_KEY, 13, { KEY_WLAN } }, { KE_KEY, 16, { KEY_PROG1 } }, { KE_KEY, 17, { KEY_PROG2 } }, + { KE_KEY, 64, { KEY_PROG3 } }, + { KE_KEY, 65, { KEY_PROG4 } }, + { KE_KEY, 66, { KEY_TOUCHPAD_OFF } }, + { KE_KEY, 67, { KEY_TOUCHPAD_ON } }, { KE_END, 0 }, }; @@ -587,6 +632,28 @@ static void ideapad_input_novokey(struct ideapad_private *priv) ideapad_input_report(priv, 16); } +static void ideapad_check_special_buttons(struct ideapad_private *priv) +{ + unsigned long bit, value; + + read_ec_data(ideapad_handle, VPCCMD_R_SPECIAL_BUTTONS, &value); + + for (bit = 0; bit < 16; bit++) { + if (test_bit(bit, &value)) { + switch (bit) { + case 6: + /* Thermal Management button */ + ideapad_input_report(priv, 65); + break; + case 1: + /* OneKey Theater button */ + ideapad_input_report(priv, 64); + break; + } + } + } +} + /* * backlight */ @@ -691,6 +758,24 @@ static const struct acpi_device_id ideapad_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, ideapad_device_ids); +static void ideapad_sync_touchpad_state(struct acpi_device *adevice) +{ + struct ideapad_private *priv = dev_get_drvdata(&adevice->dev); + unsigned long value; + + /* Without reading from EC touchpad LED doesn't switch state */ + if (!read_ec_data(adevice->handle, VPCCMD_R_TOUCHPAD, &value)) { + /* Some IdeaPads don't really turn off touchpad - they only + * switch the LED state. We (de)activate KBC AUX port to turn + * touchpad off and on. We send KEY_TOUCHPAD_OFF and + * KEY_TOUCHPAD_ON to not to get out of sync with LED */ + unsigned char param; + i8042_command(¶m, value ? I8042_CMD_AUX_ENABLE : + I8042_CMD_AUX_DISABLE); + ideapad_input_report(priv, value ? 67 : 66); + } +} + static int __devinit ideapad_acpi_add(struct acpi_device *adevice) { int ret, i; @@ -727,6 +812,7 @@ static int __devinit ideapad_acpi_add(struct acpi_device *adevice) priv->rfk[i] = NULL; } ideapad_sync_rfk_state(priv); + ideapad_sync_touchpad_state(adevice); if (!acpi_video_backlight_support()) { ret = ideapad_backlight_init(priv); @@ -785,9 +871,14 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) ideapad_sync_rfk_state(priv); break; case 13: + case 11: + case 7: case 6: ideapad_input_report(priv, vpc_bit); break; + case 5: + ideapad_sync_touchpad_state(adevice); + break; case 4: ideapad_backlight_notify_brightness(priv); break; @@ -797,6 +888,9 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) case 2: ideapad_backlight_notify_power(priv); break; + case 0: + ideapad_check_special_buttons(priv); + break; default: pr_info("Unknown event: %lu\n", vpc_bit); } @@ -804,6 +898,15 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) } } +static int ideapad_acpi_resume(struct device *device) +{ + ideapad_sync_rfk_state(ideapad_priv); + ideapad_sync_touchpad_state(to_acpi_device(device)); + return 0; +} + +static SIMPLE_DEV_PM_OPS(ideapad_pm, NULL, ideapad_acpi_resume); + static struct acpi_driver ideapad_acpi_driver = { .name = "ideapad_acpi", .class = "IdeaPad", @@ -811,6 +914,7 @@ static struct acpi_driver ideapad_acpi_driver = { .ops.add = ideapad_acpi_add, .ops.remove = ideapad_acpi_remove, .ops.notify = ideapad_acpi_notify, + .drv.pm = &ideapad_pm, .owner = THIS_MODULE, }; diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c index f64441844317f513c6ec8db521fb0bad37afbda8..2111dbb7e1e380263b6118218b619089298a39a2 100644 --- a/drivers/platform/x86/msi-laptop.c +++ b/drivers/platform/x86/msi-laptop.c @@ -85,7 +85,9 @@ #define MSI_STANDARD_EC_TOUCHPAD_ADDRESS 0xe4 #define MSI_STANDARD_EC_TOUCHPAD_MASK (1 << 4) +#ifdef CONFIG_PM_SLEEP static int msi_laptop_resume(struct device *device); +#endif static SIMPLE_DEV_PM_OPS(msi_laptop_pm, NULL, msi_laptop_resume); #define MSI_STANDARD_EC_DEVICES_EXISTS_ADDRESS 0x2f @@ -753,6 +755,7 @@ static int rfkill_init(struct platform_device *sdev) return retval; } +#ifdef CONFIG_PM_SLEEP static int msi_laptop_resume(struct device *device) { u8 data; @@ -773,6 +776,7 @@ static int msi_laptop_resume(struct device *device) return 0; } +#endif static int __init msi_laptop_input_setup(void) { diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index 24480074bcf047c40b219dcf5b055ce829d865d7..8e8caa767d6aec521e65cd42475e3b2950c32907 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -188,7 +188,9 @@ static const struct acpi_device_id pcc_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, pcc_device_ids); +#ifdef CONFIG_PM_SLEEP static int acpi_pcc_hotkey_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(acpi_pcc_hotkey_pm, NULL, acpi_pcc_hotkey_resume); static struct acpi_driver acpi_pcc_driver = { @@ -540,6 +542,7 @@ static void acpi_pcc_destroy_input(struct pcc_acpi *pcc) /* kernel module interface */ +#ifdef CONFIG_PM_SLEEP static int acpi_pcc_hotkey_resume(struct device *dev) { struct pcc_acpi *pcc; @@ -556,6 +559,7 @@ static int acpi_pcc_hotkey_resume(struct device *dev) return acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, pcc->sticky_mode); } +#endif static int acpi_pcc_hotkey_add(struct acpi_device *device) { diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c index c1ca7bcebb66b52bfb033fc24cc0bc2856bd313d..dd90d15f52101e24296b30523d68056e01bac7df 100644 --- a/drivers/platform/x86/samsung-laptop.c +++ b/drivers/platform/x86/samsung-laptop.c @@ -26,9 +26,7 @@ #include #include #include -#ifdef CONFIG_ACPI_VIDEO #include -#endif /* * This driver is needed because a number of Samsung laptops do not hook @@ -1558,9 +1556,7 @@ static int __init samsung_init(void) samsung->handle_backlight = false; } else if (samsung->quirks->broken_acpi_video) { pr_info("Disabling ACPI video driver\n"); -#ifdef CONFIG_ACPI_VIDEO acpi_video_unregister(); -#endif } #endif diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 9363969ad07adf65cefe1a6aa918ca47363ca907..daaddec68def7e1c7cb11e4fe6d54e4193943c55 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -140,7 +140,10 @@ MODULE_PARM_DESC(kbd_backlight_timeout, "1 for 30 seconds, 2 for 60 seconds and 3 to disable timeout " "(default: 0)"); +#ifdef CONFIG_PM_SLEEP static void sony_nc_kbd_backlight_resume(void); +static void sony_nc_thermal_resume(void); +#endif static int sony_nc_kbd_backlight_setup(struct platform_device *pd, unsigned int handle); static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd); @@ -151,7 +154,6 @@ static void sony_nc_battery_care_cleanup(struct platform_device *pd); static int sony_nc_thermal_setup(struct platform_device *pd); static void sony_nc_thermal_cleanup(struct platform_device *pd); -static void sony_nc_thermal_resume(void); static int sony_nc_lid_resume_setup(struct platform_device *pd); static void sony_nc_lid_resume_cleanup(struct platform_device *pd); @@ -1431,6 +1433,7 @@ static void sony_nc_function_cleanup(struct platform_device *pd) sony_nc_handles_cleanup(pd); } +#ifdef CONFIG_PM_SLEEP static void sony_nc_function_resume(void) { unsigned int i, result, bitmask, arg; @@ -1508,6 +1511,7 @@ static int sony_nc_resume(struct device *dev) return 0; } +#endif static SIMPLE_DEV_PM_OPS(sony_nc_pm, NULL, sony_nc_resume); @@ -1872,6 +1876,7 @@ static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd) } } +#ifdef CONFIG_PM_SLEEP static void sony_nc_kbd_backlight_resume(void) { int ignore = 0; @@ -1888,6 +1893,7 @@ static void sony_nc_kbd_backlight_resume(void) (kbdbl_ctl->base + 0x200) | (kbdbl_ctl->timeout << 0x10), &ignore); } +#endif struct battery_care_control { struct device_attribute attrs[2]; @@ -2210,6 +2216,7 @@ static void sony_nc_thermal_cleanup(struct platform_device *pd) } } +#ifdef CONFIG_PM_SLEEP static void sony_nc_thermal_resume(void) { unsigned int status = sony_nc_thermal_mode_get(); @@ -2217,6 +2224,7 @@ static void sony_nc_thermal_resume(void) if (status != th_handle->mode) sony_nc_thermal_mode_set(th_handle->mode); } +#endif /* resume on LID open */ struct snc_lid_resume_control { @@ -4287,6 +4295,7 @@ static int sony_pic_add(struct acpi_device *device) return result; } +#ifdef CONFIG_PM_SLEEP static int sony_pic_suspend(struct device *dev) { if (sony_pic_disable(to_acpi_device(dev))) @@ -4300,6 +4309,7 @@ static int sony_pic_resume(struct device *dev) spic_dev.cur_ioport, spic_dev.cur_irq); return 0; } +#endif static SIMPLE_DEV_PM_OPS(sony_pic_pm, sony_pic_suspend, sony_pic_resume); diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index e7f73287636cd9bdabb3f0b32104d4b7257e5e69..52daaa816e53691792b6071955dbe680c4721b91 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -545,7 +545,7 @@ TPACPI_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ */ static int acpi_evalf(acpi_handle handle, - void *res, char *method, char *fmt, ...) + int *res, char *method, char *fmt, ...) { char *fmt0 = fmt; struct acpi_object_list params; @@ -606,7 +606,7 @@ static int acpi_evalf(acpi_handle handle, success = (status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER); if (success && res) - *(int *)res = out_obj.integer.value; + *res = out_obj.integer.value; break; case 'v': /* void */ success = status == AE_OK; @@ -922,6 +922,7 @@ static struct input_dev *tpacpi_inputdev; static struct mutex tpacpi_inputdev_send_mutex; static LIST_HEAD(tpacpi_all_drivers); +#ifdef CONFIG_PM_SLEEP static int tpacpi_suspend_handler(struct device *dev) { struct ibm_struct *ibm, *itmp; @@ -949,6 +950,7 @@ static int tpacpi_resume_handler(struct device *dev) return 0; } +#endif static SIMPLE_DEV_PM_OPS(tpacpi_pm, tpacpi_suspend_handler, tpacpi_resume_handler); @@ -7384,17 +7386,18 @@ static int fan_get_status(u8 *status) * Add TPACPI_FAN_RD_ACPI_FANS ? */ switch (fan_status_access_mode) { - case TPACPI_FAN_RD_ACPI_GFAN: + case TPACPI_FAN_RD_ACPI_GFAN: { /* 570, 600e/x, 770e, 770x */ + int res; - if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d"))) + if (unlikely(!acpi_evalf(gfan_handle, &res, NULL, "d"))) return -EIO; if (likely(status)) - *status = s & 0x07; + *status = res & 0x07; break; - + } case TPACPI_FAN_RD_TPEC: /* all except 570, 600e/x, 770e, 770x */ if (unlikely(!acpi_ec_read(fan_status_offset, &s))) @@ -8662,6 +8665,13 @@ static int __must_check __init get_thinkpad_model_data( tp->model_str = kstrdup(s, GFP_KERNEL); if (!tp->model_str) return -ENOMEM; + } else { + s = dmi_get_system_info(DMI_BIOS_VENDOR); + if (s && !(strnicmp(s, "Lenovo", 6))) { + tp->model_str = kstrdup(s, GFP_KERNEL); + if (!tp->model_str) + return -ENOMEM; + } } s = dmi_get_system_info(DMI_PRODUCT_NAME); diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index c13ba5bac93f1c594f22ecb1b6e701586793a081..5f1256d5e9332cf45dbdd2031987ea41fe0212cf 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -1296,6 +1296,7 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event) } } +#ifdef CONFIG_PM_SLEEP static int toshiba_acpi_suspend(struct device *device) { struct toshiba_acpi_dev *dev = acpi_driver_data(to_acpi_device(device)); @@ -1317,6 +1318,7 @@ static int toshiba_acpi_resume(struct device *device) return 0; } +#endif static SIMPLE_DEV_PM_OPS(toshiba_acpi_pm, toshiba_acpi_suspend, toshiba_acpi_resume); diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c index 715a43cb5e3c49020c24a07c302ec3792fcce84a..5e5d6317d690095b9f95ff761b2c5d5d0cb5a7d4 100644 --- a/drivers/platform/x86/toshiba_bluetooth.c +++ b/drivers/platform/x86/toshiba_bluetooth.c @@ -41,7 +41,9 @@ static const struct acpi_device_id bt_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, bt_device_ids); +#ifdef CONFIG_PM_SLEEP static int toshiba_bt_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(toshiba_bt_pm, NULL, toshiba_bt_resume); static struct acpi_driver toshiba_bt_rfkill_driver = { @@ -90,10 +92,12 @@ static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event) toshiba_bluetooth_enable(device->handle); } +#ifdef CONFIG_PM_SLEEP static int toshiba_bt_resume(struct device *dev) { return toshiba_bluetooth_enable(to_acpi_device(dev)->handle); } +#endif static int toshiba_bt_rfkill_add(struct acpi_device *device) { diff --git a/drivers/platform/x86/xo1-rfkill.c b/drivers/platform/x86/xo1-rfkill.c index b57ad8641480424b660f4d447acebdcf9ec9a2b4..1da13ed34b04f9f944c7bb869f4dcafb5c036e46 100644 --- a/drivers/platform/x86/xo1-rfkill.c +++ b/drivers/platform/x86/xo1-rfkill.c @@ -12,8 +12,7 @@ #include #include #include - -#include +#include static bool card_blocked; diff --git a/drivers/platform/x86/xo15-ebook.c b/drivers/platform/x86/xo15-ebook.c index 849c07c13bf6cae790c3e99dfb402f55b88a2a1f..38ba39d7ca7de5cebd5f45163f55035b4f303d6e 100644 --- a/drivers/platform/x86/xo15-ebook.c +++ b/drivers/platform/x86/xo15-ebook.c @@ -77,10 +77,12 @@ static void ebook_switch_notify(struct acpi_device *device, u32 event) } } +#ifdef CONFIG_PM_SLEEP static int ebook_switch_resume(struct device *dev) { return ebook_send_state(to_acpi_device(dev)); } +#endif static SIMPLE_DEV_PM_OPS(ebook_switch_pm, NULL, ebook_switch_resume); diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 55b10b81335384f203c3fb91304a86679b93f868..a89a41acf9c54bb1d4715cec9fabbf1caf29c915 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -17,6 +17,7 @@ #include #include #include +#include #include diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c index 6a1ca735e93582b062d5b5e3e61d451427bef279..7312f2651647fbb97e64caa56fe03e778f2508a0 100644 --- a/drivers/power/pda_power.c +++ b/drivers/power/pda_power.c @@ -24,11 +24,7 @@ static inline unsigned int get_irq_flags(struct resource *res) { - unsigned int flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED; - - flags |= res->flags & IRQF_TRIGGER_MASK; - - return flags; + return IRQF_SHARED | (res->flags & IRQF_TRIGGER_MASK); } static struct device *dev; diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 8fc3808d7a3e8b08b2bc3a8eb53b899f9a41b953..90c5c7357a5041041f518f564849fa98240f50f4 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -1,12 +1,31 @@ menuconfig PWM - bool "PWM Support" + bool "Pulse-Width Modulation (PWM) Support" depends on !MACH_JZ4740 && !PUV3_PWM help - This enables PWM support through the generic PWM framework. - You only need to enable this, if you also want to enable - one or more of the PWM drivers below. - - If unsure, say N. + Generic Pulse-Width Modulation (PWM) support. + + In Pulse-Width Modulation, a variation of the width of pulses + in a rectangular pulse signal is used as a means to alter the + average power of the signal. Applications include efficient + power delivery and voltage regulation. In computer systems, + PWMs are commonly used to control fans or the brightness of + display backlights. + + This framework provides a generic interface to PWM devices + within the Linux kernel. On the driver side it provides an API + to register and unregister a PWM chip, an abstraction of a PWM + controller, that supports one or more PWM devices. Client + drivers can request PWM devices and use the generic framework + to configure as well as enable and disable them. + + This generic framework replaces the legacy PWM framework which + allows only a single driver implementing the required API. Not + all legacy implementations have been ported to the framework + yet. The framework provides an API that is backward compatible + with the legacy framework so that existing client drivers + continue to work as expected. + + If unsure, say no. if PWM diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index ecb76909e946542ee9beff407c8d2ed1e69ff56e..c6e05078d3adaff05708cc11ce76ea97763a375b 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -129,8 +129,8 @@ static int pwm_device_request(struct pwm_device *pwm, const char *label) return 0; } -static struct pwm_device *of_pwm_simple_xlate(struct pwm_chip *pc, - const struct of_phandle_args *args) +static struct pwm_device * +of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args) { struct pwm_device *pwm; @@ -149,7 +149,7 @@ static struct pwm_device *of_pwm_simple_xlate(struct pwm_chip *pc, return pwm; } -void of_pwmchip_add(struct pwm_chip *chip) +static void of_pwmchip_add(struct pwm_chip *chip) { if (!chip->dev || !chip->dev->of_node) return; @@ -162,7 +162,7 @@ void of_pwmchip_add(struct pwm_chip *chip) of_node_get(chip->dev->of_node); } -void of_pwmchip_remove(struct pwm_chip *chip) +static void of_pwmchip_remove(struct pwm_chip *chip) { if (chip->dev && chip->dev->of_node) of_node_put(chip->dev->of_node); @@ -527,7 +527,7 @@ void __init pwm_add_table(struct pwm_lookup *table, size_t num) struct pwm_device *pwm_get(struct device *dev, const char *con_id) { struct pwm_device *pwm = ERR_PTR(-EPROBE_DEFER); - const char *dev_id = dev ? dev_name(dev): NULL; + const char *dev_id = dev ? dev_name(dev) : NULL; struct pwm_chip *chip = NULL; unsigned int index = 0; unsigned int best = 0; @@ -609,7 +609,7 @@ void pwm_put(struct pwm_device *pwm) mutex_lock(&pwm_lock); if (!test_and_clear_bit(PWMF_REQUESTED, &pwm->flags)) { - pr_warning("PWM device already freed\n"); + pr_warn("PWM device already freed\n"); goto out; } diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c index d10386528c9ce4c684413f750960b23a12225fa8..e5187c0ade9fdde4a4cfd4e8ba55c8b2d337173a 100644 --- a/drivers/pwm/pwm-samsung.c +++ b/drivers/pwm/pwm-samsung.c @@ -225,6 +225,7 @@ static int s3c_pwm_probe(struct platform_device *pdev) /* calculate base of control bits in TCON */ s3c->tcon_base = id == 0 ? 0 : (id * 4) + 4; + s3c->chip.dev = &pdev->dev; s3c->chip.ops = &s3c_pwm_ops; s3c->chip.base = -1; s3c->chip.npwm = 1; diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index 02ce18d5e49a7800e396d2e519692bc1937701bf..057465e0553c7d252b8be7eebf5507deb5a24127 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -187,10 +187,8 @@ static int tegra_pwm_probe(struct platform_device *pdev) } pwm->mmio_base = devm_request_and_ioremap(&pdev->dev, r); - if (!pwm->mmio_base) { - dev_err(&pdev->dev, "failed to ioremap() region\n"); + if (!pwm->mmio_base) return -EADDRNOTAVAIL; - } platform_set_drvdata(pdev, pwm); diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index 3c2ad284ee3ecce9a2ee80a140cdd2351b494530..4b6688909fee076c5573e086b972b7b3cf5ebffc 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -100,6 +100,13 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, writel(period_cycles, pc->mmio_base + CAP3); } + if (!test_bit(PWMF_ENABLED, &pwm->flags)) { + reg_val = readw(pc->mmio_base + ECCTL2); + /* Disable APWM mode to put APWM output Low */ + reg_val &= ~ECCTL2_APWM_MODE; + writew(reg_val, pc->mmio_base + ECCTL2); + } + pm_runtime_put_sync(pc->chip.dev); return 0; } @@ -192,10 +199,8 @@ static int __devinit ecap_pwm_probe(struct platform_device *pdev) } pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r); - if (!pc->mmio_base) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); + if (!pc->mmio_base) return -EADDRNOTAVAIL; - } ret = pwmchip_add(&pc->chip); if (ret < 0) { diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index 010d232cb0c8b3ab2f586f93aebae056a4d7daf1..b1996bcd5b788fd8923ef646b828d71dbc769265 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -104,6 +104,7 @@ struct ehrpwm_pwm_chip { struct pwm_chip chip; unsigned int clk_rate; void __iomem *mmio_base; + unsigned long period_cycles[NUM_PWM_CHANNEL]; }; static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip) @@ -210,6 +211,7 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, unsigned long long c; unsigned long period_cycles, duty_cycles; unsigned short ps_divval, tb_divval; + int i; if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC) return -ERANGE; @@ -229,6 +231,28 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, duty_cycles = (unsigned long)c; } + /* + * Period values should be same for multiple PWM channels as IP uses + * same period register for multiple channels. + */ + for (i = 0; i < NUM_PWM_CHANNEL; i++) { + if (pc->period_cycles[i] && + (pc->period_cycles[i] != period_cycles)) { + /* + * Allow channel to reconfigure period if no other + * channels being configured. + */ + if (i == pwm->hwpwm) + continue; + + dev_err(chip->dev, "Period value conflicts with channel %d\n", + i); + return -EINVAL; + } + } + + pc->period_cycles[pwm->hwpwm] = period_cycles; + /* Configure clock prescaler to support Low frequency PWM wave */ if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval, &tb_divval)) { @@ -320,10 +344,15 @@ static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) { + struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); + if (test_bit(PWMF_ENABLED, &pwm->flags)) { dev_warn(chip->dev, "Removing PWM device without disabling\n"); pm_runtime_put_sync(chip->dev); } + + /* set period value to zero on free */ + pc->period_cycles[pwm->hwpwm] = 0; } static const struct pwm_ops ehrpwm_pwm_ops = { @@ -371,10 +400,8 @@ static int __devinit ehrpwm_pwm_probe(struct platform_device *pdev) } pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r); - if (!pc->mmio_base) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); + if (!pc->mmio_base) return -EADDRNOTAVAIL; - } ret = pwmchip_add(&pc->chip); if (ret < 0) { diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c index 548021439f0cc2a71183496750a961d38d91b98d..ad14389b7144a29f142ed9b8e0c9d6df3b2793c0 100644 --- a/drivers/pwm/pwm-vt8500.c +++ b/drivers/pwm/pwm-vt8500.c @@ -41,7 +41,7 @@ static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask) cpu_relax(); if (unlikely(!loops)) - pr_warning("Waiting for status bits 0x%x to clear timed out\n", + pr_warn("Waiting for status bits 0x%x to clear timed out\n", bitmask); } diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 722246cf20ab2ed592a6a5ed5435b0f1320a5a44..5d44252b7342f3d72dd5060770f2b42ef3bb2e8f 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -435,6 +435,9 @@ static void tsi721_db_dpc(struct work_struct *work) " info %4.4x\n", DBELL_SID(idb.bytes), DBELL_TID(idb.bytes), DBELL_INF(idb.bytes)); } + + wr_ptr = ioread32(priv->regs + + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; } iowrite32(rd_ptr & (IDB_QSIZE - 1), @@ -445,6 +448,10 @@ static void tsi721_db_dpc(struct work_struct *work) regval |= TSI721_SR_CHINT_IDBQRCV; iowrite32(regval, priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + + wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; + if (wr_ptr != rd_ptr) + schedule_work(&priv->idb_work); } /** @@ -2212,7 +2219,7 @@ static int __devinit tsi721_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct tsi721_device *priv; - int i, cap; + int cap; int err; u32 regval; @@ -2232,12 +2239,15 @@ static int __devinit tsi721_probe(struct pci_dev *pdev, priv->pdev = pdev; #ifdef DEBUG + { + int i; for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { dev_dbg(&pdev->dev, "res[%d] @ 0x%llx (0x%lx, 0x%lx)\n", i, (unsigned long long)pci_resource_start(pdev, i), (unsigned long)pci_resource_len(pdev, i), pci_resource_flags(pdev, i)); } + } #endif /* * Verify BAR configuration diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c index 182b553059c9c82a15f8ff164d64c5d37e708c52..c151fd5d8c974d978c25cf9ded8a9805b333b9af 100644 --- a/drivers/regulator/ab3100.c +++ b/drivers/regulator/ab3100.c @@ -486,6 +486,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = { .id = AB3100_BUCK, .ops = ®ulator_ops_variable_sleepable, .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages), + .volt_table = ldo_e_buck_typ_voltages, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_time = 1000, diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index e9c2085f9dfbe0993c6931c573efb52a660f06a0..ce0fe72a428e811418aa8190c7f534ce1009d5a4 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -64,14 +64,15 @@ static int anatop_set_voltage_sel(struct regulator_dev *reg, unsigned selector) static int anatop_get_voltage_sel(struct regulator_dev *reg) { struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); - u32 val; + u32 val, mask; if (!anatop_reg->control_reg) return -ENOTSUPP; val = anatop_read_reg(anatop_reg->mfd, anatop_reg->control_reg); - val = (val & ((1 << anatop_reg->vol_bit_width) - 1)) >> + mask = ((1 << anatop_reg->vol_bit_width) - 1) << anatop_reg->vol_bit_shift; + val = (val & mask) >> anatop_reg->vol_bit_shift; return val - anatop_reg->min_bit_val; } diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index f092588a078c65b3d3951a55a8ef861a44a50146..48385318175a83fe17208e099caa46c07a01d2f2 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3217,7 +3217,7 @@ regulator_register(const struct regulator_desc *regulator_desc, dev_set_drvdata(&rdev->dev, rdev); - if (config->ena_gpio) { + if (config->ena_gpio && gpio_is_valid(config->ena_gpio)) { ret = gpio_request_one(config->ena_gpio, GPIOF_DIR_OUT | config->ena_gpio_flags, rdev_get_name(rdev)); diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 34b67bee9323ce00a49b30bb0cf7d9256660b6f8..8b5944f2d7d1ddd36e82e92d786770e469743dfe 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -57,16 +57,17 @@ static int gpio_regulator_get_value(struct regulator_dev *dev) return -EINVAL; } -static int gpio_regulator_set_value(struct regulator_dev *dev, - int min, int max, unsigned *selector) +static int gpio_regulator_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV, + unsigned *selector) { struct gpio_regulator_data *data = rdev_get_drvdata(dev); int ptr, target = 0, state, best_val = INT_MAX; for (ptr = 0; ptr < data->nr_states; ptr++) if (data->states[ptr].value < best_val && - data->states[ptr].value >= min && - data->states[ptr].value <= max) { + data->states[ptr].value >= min_uV && + data->states[ptr].value <= max_uV) { target = data->states[ptr].gpios; best_val = data->states[ptr].value; if (selector) @@ -85,13 +86,6 @@ static int gpio_regulator_set_value(struct regulator_dev *dev, return 0; } -static int gpio_regulator_set_voltage(struct regulator_dev *dev, - int min_uV, int max_uV, - unsigned *selector) -{ - return gpio_regulator_set_value(dev, min_uV, max_uV, selector); -} - static int gpio_regulator_list_voltage(struct regulator_dev *dev, unsigned selector) { @@ -106,7 +100,27 @@ static int gpio_regulator_list_voltage(struct regulator_dev *dev, static int gpio_regulator_set_current_limit(struct regulator_dev *dev, int min_uA, int max_uA) { - return gpio_regulator_set_value(dev, min_uA, max_uA, NULL); + struct gpio_regulator_data *data = rdev_get_drvdata(dev); + int ptr, target = 0, state, best_val = 0; + + for (ptr = 0; ptr < data->nr_states; ptr++) + if (data->states[ptr].value > best_val && + data->states[ptr].value >= min_uA && + data->states[ptr].value <= max_uA) { + target = data->states[ptr].gpios; + best_val = data->states[ptr].value; + } + + if (best_val == 0) + return -EINVAL; + + for (ptr = 0; ptr < data->nr_gpios; ptr++) { + state = (target & (1 << ptr)) >> ptr; + gpio_set_value(data->gpios[ptr].gpio, state); + } + data->state = target; + + return 0; } static struct regulator_ops gpio_regulator_voltage_ops = { diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 17d19fbbc490156c8507301808863411a5f3135f..46c7e88f8381910004a4e46b0a3a722a1bcd7f28 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -486,9 +486,12 @@ static int palmas_map_voltage_ldo(struct regulator_dev *rdev, { int ret, voltage; - ret = ((min_uV - 900000) / 50000) + 1; - if (ret < 0) - return ret; + if (min_uV == 0) + return 0; + + if (min_uV < 900000) + min_uV = 900000; + ret = DIV_ROUND_UP(min_uV - 900000, 50000) + 1; /* Map back into a voltage to verify we're still in bounds */ voltage = palmas_list_voltage_ldo(rdev, ret); @@ -586,7 +589,7 @@ static int palmas_ldo_init(struct palmas *palmas, int id, addr = palmas_regs_info[id].ctrl_addr; - ret = palmas_smps_read(palmas, addr, ®); + ret = palmas_ldo_read(palmas, addr, ®); if (ret) return ret; @@ -596,7 +599,7 @@ static int palmas_ldo_init(struct palmas *palmas, int id, if (reg_init->mode_sleep) reg |= PALMAS_LDO1_CTRL_MODE_SLEEP; - ret = palmas_smps_write(palmas, addr, reg); + ret = palmas_ldo_write(palmas, addr, reg); if (ret) return ret; @@ -630,7 +633,7 @@ static __devinit int palmas_probe(struct platform_device *pdev) ret = palmas_smps_read(palmas, PALMAS_SMPS_CTRL, ®); if (ret) - goto err_unregister_regulator; + return ret; if (reg & PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN) pmic->smps123 = 1; @@ -676,7 +679,9 @@ static __devinit int palmas_probe(struct platform_device *pdev) case PALMAS_REG_SMPS10: pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES; pmic->desc[id].ops = &palmas_ops_smps10; - pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL; + pmic->desc[id].vsel_reg = + PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, + PALMAS_SMPS10_CTRL); pmic->desc[id].vsel_mask = SMPS10_VSEL; pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, @@ -778,8 +783,10 @@ static __devinit int palmas_probe(struct platform_device *pdev) reg_init = pdata->reg_init[id]; if (reg_init) { ret = palmas_ldo_init(palmas, id, reg_init); - if (ret) + if (ret) { + regulator_unregister(pmic->rdev[id]); goto err_unregister_regulator; + } } } } diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c index 6caa222af77a284f09f1e8a5f634da794dd84838..ab00cab905b730459c6e752907f1139aaec9ee57 100644 --- a/drivers/regulator/tps65217-regulator.c +++ b/drivers/regulator/tps65217-regulator.c @@ -22,6 +22,7 @@ #include #include +#include #include #include #include @@ -281,37 +282,130 @@ static const struct regulator_desc regulators[] = { NULL), }; +#ifdef CONFIG_OF +static struct of_regulator_match reg_matches[] = { + { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 }, + { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 }, + { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 }, + { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 }, + { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 }, + { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 }, + { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 }, +}; + +static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev) +{ + struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); + struct device_node *node = tps->dev->of_node; + struct tps65217_board *pdata; + struct device_node *regs; + int i, count; + + regs = of_find_node_by_name(node, "regulators"); + if (!regs) + return NULL; + + count = of_regulator_match(pdev->dev.parent, regs, + reg_matches, TPS65217_NUM_REGULATOR); + of_node_put(regs); + if ((count < 0) || (count > TPS65217_NUM_REGULATOR)) + return NULL; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + for (i = 0; i < count; i++) { + if (!reg_matches[i].init_data || !reg_matches[i].of_node) + continue; + + pdata->tps65217_init_data[i] = reg_matches[i].init_data; + pdata->of_node[i] = reg_matches[i].of_node; + } + + return pdata; +} +#else +static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev) +{ + return NULL; +} +#endif + static int __devinit tps65217_regulator_probe(struct platform_device *pdev) { + struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); + struct tps65217_board *pdata = dev_get_platdata(tps->dev); + struct regulator_init_data *reg_data; struct regulator_dev *rdev; - struct tps65217 *tps; - struct tps_info *info = &tps65217_pmic_regs[pdev->id]; struct regulator_config config = { }; + int i, ret; - /* Already set by core driver */ - tps = dev_to_tps65217(pdev->dev.parent); - tps->info[pdev->id] = info; + if (tps->dev->of_node) + pdata = tps65217_parse_dt(pdev); - config.dev = &pdev->dev; - config.of_node = pdev->dev.of_node; - config.init_data = pdev->dev.platform_data; - config.driver_data = tps; + if (!pdata) { + dev_err(&pdev->dev, "Platform data not found\n"); + return -EINVAL; + } - rdev = regulator_register(®ulators[pdev->id], &config); - if (IS_ERR(rdev)) - return PTR_ERR(rdev); + if (tps65217_chip_id(tps) != TPS65217) { + dev_err(&pdev->dev, "Invalid tps chip version\n"); + return -ENODEV; + } - platform_set_drvdata(pdev, rdev); + platform_set_drvdata(pdev, tps); + for (i = 0; i < TPS65217_NUM_REGULATOR; i++) { + + reg_data = pdata->tps65217_init_data[i]; + + /* + * Regulator API handles empty constraints but not NULL + * constraints + */ + if (!reg_data) + continue; + + /* Register the regulators */ + tps->info[i] = &tps65217_pmic_regs[i]; + + config.dev = tps->dev; + config.init_data = reg_data; + config.driver_data = tps; + config.regmap = tps->regmap; + if (tps->dev->of_node) + config.of_node = pdata->of_node[i]; + + rdev = regulator_register(®ulators[i], &config); + if (IS_ERR(rdev)) { + dev_err(tps->dev, "failed to register %s regulator\n", + pdev->name); + ret = PTR_ERR(rdev); + goto err_unregister_regulator; + } + + /* Save regulator for cleanup */ + tps->rdev[i] = rdev; + } return 0; + +err_unregister_regulator: + while (--i >= 0) + regulator_unregister(tps->rdev[i]); + + return ret; } static int __devexit tps65217_regulator_remove(struct platform_device *pdev) { - struct regulator_dev *rdev = platform_get_drvdata(pdev); + struct tps65217 *tps = platform_get_drvdata(pdev); + unsigned int i; + + for (i = 0; i < TPS65217_NUM_REGULATOR; i++) + regulator_unregister(tps->rdev[i]); platform_set_drvdata(pdev, NULL); - regulator_unregister(rdev); return 0; } diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index e6da90ab5153dedd64ebd96137776f652af7d152..19241fc300505f46ff0179470a734238cb7c76fd 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -240,14 +240,16 @@ static struct tps6586x_regulator tps6586x_regulator[] = { TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7), TPS6586X_LDO(LDO_RTC, NULL, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1), - TPS6586X_LDO(SM_2, "sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), + TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6), TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6), - TPS6586X_DVM(SM_0, "sm0", dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, VCC1, 2), - TPS6586X_DVM(SM_1, "sm1", dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, VCC1, 0), + TPS6586X_DVM(SM_0, "vin-sm0", dvm, SM0V1, 0, 5, ENA, 1, + ENB, 1, VCC1, 2), + TPS6586X_DVM(SM_1, "vin-sm1", dvm, SM1V1, 0, 5, ENA, 0, + ENB, 0, VCC1, 0), }; /* diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 242fe90dc56502ad5c5e1cc0ced284561b0e6df9..77a71a5c17c338708ec112a874e59f15e6212257 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -1037,7 +1037,7 @@ TWL6025_ADJUSTABLE_LDO(LDO7, 0x74, 1000, 3300); TWL6025_ADJUSTABLE_LDO(LDO6, 0x60, 1000, 3300); TWL6025_ADJUSTABLE_LDO(LDOLN, 0x64, 1000, 3300); TWL6025_ADJUSTABLE_LDO(LDOUSB, 0x70, 1000, 3300); -TWL4030_FIXED_LDO(VINTANA2, 0x3f, 1500, 11, 100, 0x08); +TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08); TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08); TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08); TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08); @@ -1048,7 +1048,6 @@ TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 0); TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 0); TWL6030_FIXED_LDO(V1V8, 0x16, 1800, 0); TWL6030_FIXED_LDO(V2V1, 0x1c, 2100, 0); -TWL6030_FIXED_RESOURCE(CLK32KG, 0x8C, 0); TWL6025_ADJUSTABLE_SMPS(SMPS3, 0x34); TWL6025_ADJUSTABLE_SMPS(SMPS4, 0x10); TWL6025_ADJUSTABLE_SMPS(VIO, 0x16); @@ -1117,7 +1116,7 @@ static const struct of_device_id twl_of_match[] __devinitconst = { TWL6025_OF_MATCH("ti,twl6025-ldo6", LDO6), TWL6025_OF_MATCH("ti,twl6025-ldoln", LDOLN), TWL6025_OF_MATCH("ti,twl6025-ldousb", LDOUSB), - TWLFIXED_OF_MATCH("ti,twl4030-vintana2", VINTANA2), + TWLFIXED_OF_MATCH("ti,twl4030-vintana1", VINTANA1), TWLFIXED_OF_MATCH("ti,twl4030-vintdig", VINTDIG), TWLFIXED_OF_MATCH("ti,twl4030-vusb1v5", VUSB1V5), TWLFIXED_OF_MATCH("ti,twl4030-vusb1v8", VUSB1V8), diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index 590cfafc7c172ce8a2d3230de12057a85dfaa7d0..1859f71372e24912203dca245f3d60c71c80a35d 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -1008,8 +1008,8 @@ static int rpmsg_probe(struct virtio_device *vdev) return 0; free_coherent: - dma_free_coherent(vdev->dev.parent, RPMSG_TOTAL_BUF_SPACE, bufs_va, - vrp->bufs_dma); + dma_free_coherent(vdev->dev.parent->parent, RPMSG_TOTAL_BUF_SPACE, + bufs_va, vrp->bufs_dma); vqs_del: vdev->config->del_vqs(vrp->vdev); free_vrp: @@ -1043,7 +1043,7 @@ static void __devexit rpmsg_remove(struct virtio_device *vdev) vdev->config->del_vqs(vrp->vdev); - dma_free_coherent(vdev->dev.parent, RPMSG_TOTAL_BUF_SPACE, + dma_free_coherent(vdev->dev.parent->parent, RPMSG_TOTAL_BUF_SPACE, vrp->rbufs, vrp->bufs_dma); kfree(vrp); diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index eb415bd7649418f1d91b5c45b98fe9411f5171d3..9592b936b71bca1987d19aceba0f6e8b20b165b9 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -582,6 +582,7 @@ enum hrtimer_restart rtc_pie_update_irq(struct hrtimer *timer) void rtc_update_irq(struct rtc_device *rtc, unsigned long num, unsigned long events) { + pm_stay_awake(rtc->dev.parent); schedule_work(&rtc->irqwork); } EXPORT_SYMBOL_GPL(rtc_update_irq); @@ -844,6 +845,7 @@ void rtc_timer_do_work(struct work_struct *work) mutex_lock(&rtc->ops_lock); again: + pm_relax(rtc->dev.parent); __rtc_read_time(rtc, &tm); now = rtc_tm_to_ktime(tm); while ((next = timerqueue_getnext(&rtc->timerqueue))) { diff --git a/drivers/rtc/rtc-88pm80x.c b/drivers/rtc/rtc-88pm80x.c index a2f956d90de0448faf2c4fc9735706aab28f4568..6367984e05653f8a3b6f7b24040123f31d7ade15 100644 --- a/drivers/rtc/rtc-88pm80x.c +++ b/drivers/rtc/rtc-88pm80x.c @@ -314,8 +314,8 @@ static int __devinit pm80x_rtc_probe(struct platform_device *pdev) info->rtc_dev = rtc_device_register("88pm80x-rtc", &pdev->dev, &pm80x_rtc_ops, THIS_MODULE); - ret = PTR_ERR(info->rtc_dev); if (IS_ERR(info->rtc_dev)) { + ret = PTR_ERR(info->rtc_dev); dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret); goto out_rtc; } @@ -339,7 +339,6 @@ static int __devinit pm80x_rtc_probe(struct platform_device *pdev) out_rtc: pm80x_free_irq(chip, info->irq, info); out: - devm_kfree(&pdev->dev, info); return ret; } @@ -349,7 +348,6 @@ static int __devexit pm80x_rtc_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); rtc_device_unregister(info->rtc_dev); pm80x_free_irq(info->chip, info->irq, info); - devm_kfree(&pdev->dev, info); return 0; } diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 831868904e02fd39b7058de5b4e7a65c9d8555b3..1dd61f402b040441c99078214017f802050c8fa5 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -58,6 +58,7 @@ struct sam9_rtc { struct rtc_device *rtcdev; u32 imr; void __iomem *gpbr; + int irq; }; #define rtt_readl(rtc, field) \ @@ -292,7 +293,7 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) { struct resource *r, *r_gpbr; struct sam9_rtc *rtc; - int ret; + int ret, irq; u32 mr; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -302,10 +303,18 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) return -ENODEV; } + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get interrupt resource\n"); + return irq; + } + rtc = kzalloc(sizeof *rtc, GFP_KERNEL); if (!rtc) return -ENOMEM; + rtc->irq = irq; + /* platform setup code should have handled this; sigh */ if (!device_can_wakeup(&pdev->dev)) device_init_wakeup(&pdev->dev, 1); @@ -345,11 +354,10 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) } /* register irq handler after we know what name we'll use */ - ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt, - IRQF_SHARED, + ret = request_irq(rtc->irq, at91_rtc_interrupt, IRQF_SHARED, dev_name(&rtc->rtcdev->dev), rtc); if (ret) { - dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS); + dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq); rtc_device_unregister(rtc->rtcdev); goto fail_register; } @@ -386,7 +394,7 @@ static int __devexit at91_rtc_remove(struct platform_device *pdev) /* disable all interrupts */ rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); - free_irq(AT91_ID_SYS, rtc); + free_irq(rtc->irq, rtc); rtc_device_unregister(rtc->rtcdev); @@ -423,7 +431,7 @@ static int at91_rtc_suspend(struct platform_device *pdev, rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); if (rtc->imr) { if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) { - enable_irq_wake(AT91_ID_SYS); + enable_irq_wake(rtc->irq); /* don't let RTTINC cause wakeups */ if (mr & AT91_RTT_RTTINCIEN) rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN); @@ -441,7 +449,7 @@ static int at91_rtc_resume(struct platform_device *pdev) if (rtc->imr) { if (device_may_wakeup(&pdev->dev)) - disable_irq_wake(AT91_ID_SYS); + disable_irq_wake(rtc->irq); mr = rtt_readl(rtc, MR); rtt_writel(rtc, MR, mr | rtc->imr); } diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 132333d754085d6b06a9c096444a95b708e45893..4267789ca9959413e90df5ea053154e07481d3ce 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -568,7 +568,6 @@ static irqreturn_t cmos_interrupt(int irq, void *p) hpet_mask_rtc_irq_bit(RTC_AIE); CMOS_READ(RTC_INTR_FLAGS); - pm_wakeup_event(cmos_rtc.dev, 0); } spin_unlock(&rtc_lock); diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c index 836118795c0bdb4f0ad5874a3b3dc50dee5ffd69..13e4df63974fa27e7d7acf97c7b94e57ff9722ac 100644 --- a/drivers/rtc/rtc-pcf2123.c +++ b/drivers/rtc/rtc-pcf2123.c @@ -43,6 +43,7 @@ #include #include #include +#include #define DRV_VERSION "0.6" @@ -292,6 +293,7 @@ static int __devinit pcf2123_probe(struct spi_device *spi) pdata->rtc = rtc; for (i = 0; i < 16; i++) { + sysfs_attr_init(&pdata->regs[i].attr.attr); sprintf(pdata->regs[i].name, "%1x", i); pdata->regs[i].attr.attr.mode = S_IRUGO | S_IWUSR; pdata->regs[i].attr.attr.name = pdata->regs[i].name; diff --git a/drivers/rtc/rtc-rs5c348.c b/drivers/rtc/rtc-rs5c348.c index 77074ccd285071f345118079a4f7c3120e6b86a3..fd5c7af04ae5a7d7c1ba30a5822396e6780adc5f 100644 --- a/drivers/rtc/rtc-rs5c348.c +++ b/drivers/rtc/rtc-rs5c348.c @@ -122,9 +122,12 @@ rs5c348_rtc_read_time(struct device *dev, struct rtc_time *tm) tm->tm_min = bcd2bin(rxbuf[RS5C348_REG_MINS] & RS5C348_MINS_MASK); tm->tm_hour = bcd2bin(rxbuf[RS5C348_REG_HOURS] & RS5C348_HOURS_MASK); if (!pdata->rtc_24h) { - tm->tm_hour %= 12; - if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM) + if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM) { + tm->tm_hour -= 20; + tm->tm_hour %= 12; tm->tm_hour += 12; + } else + tm->tm_hour %= 12; } tm->tm_wday = bcd2bin(rxbuf[RS5C348_REG_WDAY] & RS5C348_WDAY_MASK); tm->tm_mday = bcd2bin(rxbuf[RS5C348_REG_DAY] & RS5C348_DAY_MASK); diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index c5d06fe83bba6274f2e6b944a43489395e04e01c..9277d945bf4853d136ec483036be8cd0cf6f06b3 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -495,6 +495,11 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev) if (ret < 0) goto out1; + /* ensure interrupts are disabled, bootloaders can be strange */ + ret = twl_rtc_write_u8(0, REG_RTC_INTERRUPTS_REG); + if (ret < 0) + dev_warn(&pdev->dev, "unable to disable interrupt\n"); + /* init cached IRQ enable bits */ ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); if (ret < 0) diff --git a/drivers/rtc/rtc-wm831x.c b/drivers/rtc/rtc-wm831x.c index 59c6245e0421f21a70548108a2607ebdaa4bbd33..ea5c6f857ca5db35ebbfd3c581b0d5e7e32050d4 100644 --- a/drivers/rtc/rtc-wm831x.c +++ b/drivers/rtc/rtc-wm831x.c @@ -24,7 +24,7 @@ #include #include #include - +#include /* * R16416 (0x4020) - RTC Write Counter @@ -96,6 +96,26 @@ struct wm831x_rtc { unsigned int alarm_enabled:1; }; +static void wm831x_rtc_add_randomness(struct wm831x *wm831x) +{ + int ret; + u16 reg; + + /* + * The write counter contains a pseudo-random number which is + * regenerated every time we set the RTC so it should be a + * useful per-system source of entropy. + */ + ret = wm831x_reg_read(wm831x, WM831X_RTC_WRITE_COUNTER); + if (ret >= 0) { + reg = ret; + add_device_randomness(®, sizeof(reg)); + } else { + dev_warn(wm831x->dev, "Failed to read RTC write counter: %d\n", + ret); + } +} + /* * Read current time and date in RTC */ @@ -431,6 +451,8 @@ static int wm831x_rtc_probe(struct platform_device *pdev) alm_irq, ret); } + wm831x_rtc_add_randomness(wm831x); + return 0; err: diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 15370a2c5ff0b29e5286a9ffb2660beefd045f2e..0595c763dafd687ac3938f803618eed679549d76 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -534,11 +534,11 @@ static void dasd_change_state(struct dasd_device *device) if (rc) device->target = device->state; - if (device->state == device->target) - wake_up(&dasd_init_waitq); - /* let user-space know that the device status changed */ kobject_uevent(&device->cdev->dev.kobj, KOBJ_CHANGE); + + if (device->state == device->target) + wake_up(&dasd_init_waitq); } /* @@ -2157,6 +2157,7 @@ static int _dasd_sleep_on(struct dasd_ccw_req *maincqr, int interruptible) test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags) && (!dasd_eer_enabled(device))) { cqr->status = DASD_CQR_FAILED; + cqr->intrc = -EAGAIN; continue; } /* Don't try to start requests if device is stopped */ @@ -3270,6 +3271,16 @@ void dasd_generic_path_event(struct ccw_device *cdev, int *path_event) dasd_schedule_device_bh(device); } if (path_event[chp] & PE_PATHGROUP_ESTABLISHED) { + if (!(device->path_data.opm & eventlpm) && + !(device->path_data.tbvpm & eventlpm)) { + /* + * we can not establish a pathgroup on an + * unavailable path, so trigger a path + * verification first + */ + device->path_data.tbvpm |= eventlpm; + dasd_schedule_device_bh(device); + } DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Pathgroup re-established\n"); if (device->discipline->kick_validate) diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index 157defe5e0693c06c6432ddfbd65d0f6632a6f90..6b556995bb33e9baf98663175973bbb69805522d 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -384,6 +384,29 @@ static void _remove_device_from_lcu(struct alias_lcu *lcu, group->next = NULL; }; +static int +suborder_not_supported(struct dasd_ccw_req *cqr) +{ + char *sense; + char reason; + char msg_format; + char msg_no; + + sense = dasd_get_sense(&cqr->irb); + if (!sense) + return 0; + + reason = sense[0]; + msg_format = (sense[7] & 0xF0); + msg_no = (sense[7] & 0x0F); + + /* command reject, Format 0 MSG 4 - invalid parameter */ + if ((reason == 0x80) && (msg_format == 0x00) && (msg_no == 0x04)) + return 1; + + return 0; +} + static int read_unit_address_configuration(struct dasd_device *device, struct alias_lcu *lcu) { @@ -435,6 +458,8 @@ static int read_unit_address_configuration(struct dasd_device *device, do { rc = dasd_sleep_on(cqr); + if (rc && suborder_not_supported(cqr)) + return -EOPNOTSUPP; } while (rc && (cqr->retries > 0)); if (rc) { spin_lock_irqsave(&lcu->lock, flags); @@ -521,7 +546,7 @@ static void lcu_update_work(struct work_struct *work) * processing the data */ spin_lock_irqsave(&lcu->lock, flags); - if (rc || (lcu->flags & NEED_UAC_UPDATE)) { + if ((rc && (rc != -EOPNOTSUPP)) || (lcu->flags & NEED_UAC_UPDATE)) { DBF_DEV_EVENT(DBF_WARNING, device, "could not update" " alias data in lcu (rc = %d), retry later", rc); schedule_delayed_work(&lcu->ruac_data.dwork, 30*HZ); diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 40a826a7295f7282ec8f05e2dcfd66d8f9601927..c48c72abbefc640671af73090536bd206b1c95dc 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -1507,7 +1507,8 @@ static struct dasd_ccw_req *dasd_eckd_build_psf_ssc(struct dasd_device *device, * call might change behaviour of DASD devices. */ static int -dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav) +dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav, + unsigned long flags) { struct dasd_ccw_req *cqr; int rc; @@ -1516,10 +1517,19 @@ dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav) if (IS_ERR(cqr)) return PTR_ERR(cqr); + /* + * set flags e.g. turn on failfast, to prevent blocking + * the calling function should handle failed requests + */ + cqr->flags |= flags; + rc = dasd_sleep_on(cqr); if (!rc) /* trigger CIO to reprobe devices */ css_schedule_reprobe(); + else if (cqr->intrc == -EAGAIN) + rc = -EAGAIN; + dasd_sfree_request(cqr, cqr->memdev); return rc; } @@ -1527,7 +1537,8 @@ dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav) /* * Valide storage server of current device. */ -static void dasd_eckd_validate_server(struct dasd_device *device) +static int dasd_eckd_validate_server(struct dasd_device *device, + unsigned long flags) { int rc; struct dasd_eckd_private *private; @@ -1536,17 +1547,18 @@ static void dasd_eckd_validate_server(struct dasd_device *device) private = (struct dasd_eckd_private *) device->private; if (private->uid.type == UA_BASE_PAV_ALIAS || private->uid.type == UA_HYPER_PAV_ALIAS) - return; + return 0; if (dasd_nopav || MACHINE_IS_VM) enable_pav = 0; else enable_pav = 1; - rc = dasd_eckd_psf_ssc(device, enable_pav); + rc = dasd_eckd_psf_ssc(device, enable_pav, flags); /* may be requested feature is not available on server, * therefore just report error and go ahead */ DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "PSF-SSC for SSID %04x " "returned rc=%d", private->uid.ssid, rc); + return rc; } /* @@ -1556,7 +1568,13 @@ static void dasd_eckd_do_validate_server(struct work_struct *work) { struct dasd_device *device = container_of(work, struct dasd_device, kick_validate); - dasd_eckd_validate_server(device); + if (dasd_eckd_validate_server(device, DASD_CQR_FLAGS_FAILFAST) + == -EAGAIN) { + /* schedule worker again if failed */ + schedule_work(&device->kick_validate); + return; + } + dasd_put_device(device); } @@ -1685,7 +1703,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device) if (rc) goto out_err2; - dasd_eckd_validate_server(device); + dasd_eckd_validate_server(device, 0); /* device may report different configuration data after LCU setup */ rc = dasd_eckd_read_conf(device); @@ -3804,7 +3822,7 @@ dasd_eckd_ioctl(struct dasd_block *block, unsigned int cmd, void __user *argp) case BIODASDSYMMIO: return dasd_symm_io(device, argp); default: - return -ENOIOCTLCMD; + return -ENOTTY; } } @@ -4153,7 +4171,7 @@ static int dasd_eckd_restore_device(struct dasd_device *device) rc = dasd_alias_make_device_known_to_lcu(device); if (rc) return rc; - dasd_eckd_validate_server(device); + dasd_eckd_validate_server(device, DASD_CQR_FLAGS_FAILFAST); /* RE-Read Configuration Data */ rc = dasd_eckd_read_conf(device); diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index cceae70279f6407d96f7249f02939de53405ea03..654c6921a6d462f5d9fc0f0b82e9813480b96670 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -498,12 +498,9 @@ int dasd_ioctl(struct block_device *bdev, fmode_t mode, break; default: /* if the discipline has an ioctl method try it. */ - if (base->discipline->ioctl) { + rc = -ENOTTY; + if (base->discipline->ioctl) rc = base->discipline->ioctl(block, cmd, argp); - if (rc == -ENOIOCTLCMD) - rc = -EINVAL; - } else - rc = -EINVAL; } dasd_put_device(base); return rc; diff --git a/drivers/s390/char/sclp_sdias.c b/drivers/s390/char/sclp_sdias.c index 6a6f76bf6e3dad4fae79fedc125bb39b7678b79a..b1032931a1c41237766eaf6c38d7e5032e71e33d 100644 --- a/drivers/s390/char/sclp_sdias.c +++ b/drivers/s390/char/sclp_sdias.c @@ -242,11 +242,13 @@ int sclp_sdias_copy(void *dest, int start_blk, int nr_blks) switch (sdias_evbuf.event_status) { case EVSTATE_ALL_STORED: TRACE("all stored\n"); + break; case EVSTATE_PART_STORED: TRACE("part stored: %i\n", sdias_evbuf.blk_cnt); break; case EVSTATE_NO_DATA: TRACE("no data\n"); + /* fall through */ default: pr_err("Error from SCLP while copying hsa. " "Event status = %x\n", diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index ed25c8740a9ce4b0bb8e8334a32b72abc08655ae..fc916f5d731412c7146465d3ff29277979b69189 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1426,6 +1426,8 @@ static enum io_sch_action sch_get_action(struct subchannel *sch) return IO_SCH_REPROBE; if (cdev->online) return IO_SCH_VERIFY; + if (cdev->private->state == DEV_STATE_NOT_OPER) + return IO_SCH_UNREG_ATTACH; return IO_SCH_NOP; } @@ -1519,11 +1521,14 @@ static int io_subchannel_sch_event(struct subchannel *sch, int process) goto out; break; case IO_SCH_UNREG_ATTACH: + spin_lock_irqsave(sch->lock, flags); if (cdev->private->flags.resuming) { /* Device will be handled later. */ rc = 0; - goto out; + goto out_unlock; } + sch_set_cdev(sch, NULL); + spin_unlock_irqrestore(sch->lock, flags); /* Unregister ccw device. */ ccw_device_unregister(cdev); break; diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 33d6630529ded9b8db625a1ca4545c6fdb2472b3..91eec60252ee1c973198ae5c230762af37607073 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -1264,6 +1264,9 @@ int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba) int rc = 0; u64 mask64; + memset(&iscsi_init, 0x00, sizeof(struct iscsi_kwqe_init1)); + memset(&iscsi_init2, 0x00, sizeof(struct iscsi_kwqe_init2)); + bnx2i_adjust_qp_size(hba); iscsi_init.flags = diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 796482badf13acfe91f4391822d90cd6339d9ffc..2b4261cb77424b52046d6e4c255f32f3359bbf2a 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1315,8 +1315,9 @@ static void complete_scsi_command(struct CommandList *cp) } break; case CMD_PROTOCOL_ERR: + cmd->result = DID_ERROR << 16; dev_warn(&h->pdev->dev, "cp %p has " - "protocol error \n", cp); + "protocol error\n", cp); break; case CMD_HARDWARE_ERR: cmd->result = DID_ERROR << 16; diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index dc27598785e5d781ff9790697f8b3a5960921d85..ed38454228c626bdabbea4d4265b22dfbc637864 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -4066,7 +4066,6 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) spin_lock_init(&instance->cmd_pool_lock); spin_lock_init(&instance->hba_lock); spin_lock_init(&instance->completion_lock); - spin_lock_init(&poll_aen_lock); mutex_init(&instance->aen_mutex); mutex_init(&instance->reset_mutex); @@ -5392,6 +5391,8 @@ static int __init megasas_init(void) printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION, MEGASAS_EXT_VERSION); + spin_lock_init(&poll_aen_lock); + support_poll_for_event = 2; support_device_change = 1; diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 9d46fcbe7755fd2aa258e3de91c5a8cd76e3079c..9d5a56c4b3321deea9b9001468755d222fa13b51 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -1209,6 +1209,13 @@ _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc) u16 message_control; + /* Check whether controller SAS2008 B0 controller, + if it is SAS2008 B0 controller use IO-APIC instead of MSIX */ + if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 && + ioc->pdev->revision == 0x01) { + return -EINVAL; + } + base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX); if (!base) { dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not " @@ -2424,10 +2431,13 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) } /* command line tunables for max controller queue depth */ - if (max_queue_depth != -1) - max_request_credit = (max_queue_depth < facts->RequestCredit) - ? max_queue_depth : facts->RequestCredit; - else + if (max_queue_depth != -1 && max_queue_depth != 0) { + max_request_credit = min_t(u16, max_queue_depth + + ioc->hi_priority_depth + ioc->internal_depth, + facts->RequestCredit); + if (max_request_credit > MAX_HBA_QUEUE_DEPTH) + max_request_credit = MAX_HBA_QUEUE_DEPTH; + } else max_request_credit = min_t(u16, facts->RequestCredit, MAX_HBA_QUEUE_DEPTH); @@ -2502,7 +2512,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) /* set the scsi host can_queue depth * with some internal commands that could be outstanding */ - ioc->shost->can_queue = ioc->scsiio_depth - (2); + ioc->shost->can_queue = ioc->scsiio_depth; dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: " "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue)); diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 4a6381c87253ec4be307eb47dc8d1ff6ebad4dc3..de2337f255a74ff02888f67e1d202766f257930a 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -42,6 +42,8 @@ #include +static void scsi_eh_done(struct scsi_cmnd *scmd); + #define SENSE_TIMEOUT (10*HZ) /* @@ -241,6 +243,14 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) if (! scsi_command_normalize_sense(scmd, &sshdr)) return FAILED; /* no valid sense data */ + if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done) + /* + * nasty: for mid-layer issued TURs, we need to return the + * actual sense data without any recovery attempt. For eh + * issued ones, we need to try to recover and interpret + */ + return SUCCESS; + if (scsi_sense_is_deferred(&sshdr)) return NEEDS_RETRY; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ffd77739ae3e2bc4bf793fe7b4bb0ed37c3ca8f4..faa790fba1347fc61b0869015e2a28bad4f113f2 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -776,7 +776,6 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) } if (req->cmd_type == REQ_TYPE_BLOCK_PC) { /* SG_IO ioctl from block level */ - req->errors = result; if (result) { if (sense_valid && req->sense) { /* @@ -792,6 +791,10 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) if (!sense_deferred) error = __scsi_error_from_host_byte(cmd, result); } + /* + * __scsi_error_from_host_byte may have reset the host_byte + */ + req->errors = cmd->result; req->resid_len = scsi_get_resid(cmd); diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 56a93794c470ae99d603426f15eaccb1dd3ae727..d947ffc20ceba301eaaf45973fee97dfba7fb7f7 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -764,6 +764,16 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, sdev->model = (char *) (sdev->inquiry + 16); sdev->rev = (char *) (sdev->inquiry + 32); + if (strncmp(sdev->vendor, "ATA ", 8) == 0) { + /* + * sata emulation layer device. This is a hack to work around + * the SATL power management specifications which state that + * when the SATL detects the device has gone into standby + * mode, it shall respond with NOT READY. + */ + sdev->allow_restart = 1; + } + if (*bflags & BLIST_ISROM) { sdev->type = TYPE_ROM; sdev->removable = 1; diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 2d1e68db9b3ffb5828482cdda3d797e3fa1d6677..e894ca7b54c0c895cd92cf15134f0b6196d71c43 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -4146,45 +4146,7 @@ fc_bsg_rportadd(struct Scsi_Host *shost, struct fc_rport *rport) static void fc_bsg_remove(struct request_queue *q) { - struct request *req; /* block request */ - int counts; /* totals for request_list count and starved */ - if (q) { - /* Stop taking in new requests */ - spin_lock_irq(q->queue_lock); - blk_stop_queue(q); - - /* drain all requests in the queue */ - while (1) { - /* need the lock to fetch a request - * this may fetch the same reqeust as the previous pass - */ - req = blk_fetch_request(q); - /* save requests in use and starved */ - counts = q->rq.count[0] + q->rq.count[1] + - q->rq.starved[0] + q->rq.starved[1]; - spin_unlock_irq(q->queue_lock); - /* any requests still outstanding? */ - if (counts == 0) - break; - - /* This may be the same req as the previous iteration, - * always send the blk_end_request_all after a prefetch. - * It is not okay to not end the request because the - * prefetch started the request. - */ - if (req) { - /* return -ENXIO to indicate that this queue is - * going away - */ - req->errors = -ENXIO; - blk_end_request_all(req, -ENXIO); - } - - msleep(200); /* allow bsg to possibly finish */ - spin_lock_irq(q->queue_lock); - } - bsg_unregister_queue(q); blk_cleanup_queue(q); } diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 09809d06eccb3eba2b63b91767d410454d1854fa..fa1dfaa83e32986061586c4fcb2f6f8e9e23eaf9 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -575,7 +575,7 @@ static int iscsi_remove_host(struct transport_container *tc, struct iscsi_cls_host *ihost = shost->shost_data; if (ihost->bsg_q) { - bsg_remove_queue(ihost->bsg_q); + bsg_unregister_queue(ihost->bsg_q); blk_cleanup_queue(ihost->bsg_q); } return 0; diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index c7030fbee79c254ace6a41eed0a88e6b968e6bfb..3e79a2f0004279d0b2b1175281d003a664d5aeee 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -331,7 +331,7 @@ static void virtscsi_map_sgl(struct scatterlist *sg, unsigned int *p_idx, int i; for_each_sg(table->sgl, sg_elem, table->nents, i) - sg_set_buf(&sg[idx++], sg_virt(sg_elem), sg_elem->length); + sg[idx++] = *sg_elem; *p_idx = idx; } diff --git a/drivers/sh/intc/Kconfig b/drivers/sh/intc/Kconfig index c88cbccc62b0a49e398512e292770f2d280d7dd3..a305731742a9343958064f81b5635855e130d35a 100644 --- a/drivers/sh/intc/Kconfig +++ b/drivers/sh/intc/Kconfig @@ -1,3 +1,7 @@ +config SH_INTC + def_bool y + select IRQ_DOMAIN + comment "Interrupt controller options" config INTC_USERIMASK diff --git a/drivers/sh/intc/Makefile b/drivers/sh/intc/Makefile index 44f006d09471cfce4fd204b88e1893928f0a1093..54ec2a0643dfae2cfbe8b178b69dd3b9c24ab6e0 100644 --- a/drivers/sh/intc/Makefile +++ b/drivers/sh/intc/Makefile @@ -1,4 +1,4 @@ -obj-y := access.o chip.o core.o handle.o virq.o +obj-y := access.o chip.o core.o handle.o irqdomain.o virq.o obj-$(CONFIG_INTC_BALANCING) += balancing.o obj-$(CONFIG_INTC_USERIMASK) += userimask.o diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c index 7e562ccb699734b3b6ce77579309cbdb87437817..8f32a1323a79dd40e6e91433fa38e15709a3ca02 100644 --- a/drivers/sh/intc/core.c +++ b/drivers/sh/intc/core.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -310,6 +311,8 @@ int __init register_intc_controller(struct intc_desc *desc) BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */ + intc_irq_domain_init(d, hw); + /* register the vectors one by one */ for (i = 0; i < hw->nr_vectors; i++) { struct intc_vect *vect = hw->vectors + i; @@ -319,10 +322,18 @@ int __init register_intc_controller(struct intc_desc *desc) if (!vect->enum_id) continue; - res = irq_alloc_desc_at(irq, numa_node_id()); - if (res != irq && res != -EEXIST) { - pr_err("can't get irq_desc for %d\n", irq); - continue; + res = irq_create_identity_mapping(d->domain, irq); + if (unlikely(res)) { + if (res == -EEXIST) { + res = irq_domain_associate(d->domain, irq, irq); + if (unlikely(res)) { + pr_err("domain association failure\n"); + continue; + } + } else { + pr_err("can't identity map IRQ %d\n", irq); + continue; + } } intc_irq_xlate_set(irq, vect->enum_id, d); @@ -340,10 +351,21 @@ int __init register_intc_controller(struct intc_desc *desc) * IRQ support, each vector still needs to have * its own backing irq_desc. */ - res = irq_alloc_desc_at(irq2, numa_node_id()); - if (res != irq2 && res != -EEXIST) { - pr_err("can't get irq_desc for %d\n", irq2); - continue; + res = irq_create_identity_mapping(d->domain, irq2); + if (unlikely(res)) { + if (res == -EEXIST) { + res = irq_domain_associate(d->domain, + irq2, irq2); + if (unlikely(res)) { + pr_err("domain association " + "failure\n"); + continue; + } + } else { + pr_err("can't identity map IRQ %d\n", + irq); + continue; + } } vect2->enum_id = 0; diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h index f034a979a16f5c15bcd43c9cd9b9c1a069435880..7dff08e2a071377a963e4d095952bcd5f8bbd589 100644 --- a/drivers/sh/intc/internals.h +++ b/drivers/sh/intc/internals.h @@ -1,5 +1,6 @@ #include #include +#include #include #include #include @@ -66,6 +67,7 @@ struct intc_desc_int { unsigned int nr_sense; struct intc_window *window; unsigned int nr_windows; + struct irq_domain *domain; struct irq_chip chip; bool skip_suspend; }; @@ -187,6 +189,9 @@ unsigned long intc_get_ack_handle(unsigned int irq); void intc_enable_disable_enum(struct intc_desc *desc, struct intc_desc_int *d, intc_enum enum_id, int enable); +/* irqdomain.c */ +void intc_irq_domain_init(struct intc_desc_int *d, struct intc_hw_desc *hw); + /* virq.c */ void intc_subgroup_init(struct intc_desc *desc, struct intc_desc_int *d); void intc_irq_xlate_set(unsigned int irq, intc_enum id, struct intc_desc_int *d); diff --git a/drivers/sh/intc/irqdomain.c b/drivers/sh/intc/irqdomain.c new file mode 100644 index 0000000000000000000000000000000000000000..3968f1c3c5c308b0008f9193dd2f976bdc799123 --- /dev/null +++ b/drivers/sh/intc/irqdomain.c @@ -0,0 +1,68 @@ +/* + * IRQ domain support for SH INTC subsystem + * + * Copyright (C) 2012 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define pr_fmt(fmt) "intc: " fmt + +#include +#include +#include +#include "internals.h" + +/** + * intc_irq_domain_evt_xlate() - Generic xlate for vectored IRQs. + * + * This takes care of exception vector to hwirq translation through + * by way of evt2irq() translation. + * + * Note: For platforms that use a flat vector space without INTEVT this + * basically just mimics irq_domain_xlate_onecell() by way of a nopped + * out evt2irq() implementation. + */ +static int intc_evt_xlate(struct irq_domain *d, struct device_node *ctrlr, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, unsigned int *out_type) +{ + if (WARN_ON(intsize < 1)) + return -EINVAL; + + *out_hwirq = evt2irq(intspec[0]); + *out_type = IRQ_TYPE_NONE; + + return 0; +} + +static const struct irq_domain_ops intc_evt_ops = { + .xlate = intc_evt_xlate, +}; + +void __init intc_irq_domain_init(struct intc_desc_int *d, + struct intc_hw_desc *hw) +{ + unsigned int irq_base, irq_end; + + /* + * Quick linear revmap check + */ + irq_base = evt2irq(hw->vectors[0].vect); + irq_end = evt2irq(hw->vectors[hw->nr_vectors - 1].vect); + + /* + * Linear domains have a hard-wired assertion that IRQs start at + * 0 in order to make some performance optimizations. Lamely + * restrict the linear case to these conditions here, taking the + * tree penalty for linear cases with non-zero hwirq bases. + */ + if (irq_base == 0 && irq_end == (irq_base + hw->nr_vectors - 1)) + d->domain = irq_domain_add_linear(NULL, hw->nr_vectors, + &intc_evt_ops, NULL); + else + d->domain = irq_domain_add_tree(NULL, &intc_evt_ops, NULL); + + BUG_ON(!d->domain); +} diff --git a/drivers/sh/pfc/pinctrl.c b/drivers/sh/pfc/pinctrl.c index 0802b6c0d6530dfe50da02e3bcbd6b3bfbfd0bb2..0646bf6e7889a10ed6e4773af378c264377d5f8b 100644 --- a/drivers/sh/pfc/pinctrl.c +++ b/drivers/sh/pfc/pinctrl.c @@ -208,10 +208,13 @@ static int sh_pfc_gpio_request_enable(struct pinctrl_dev *pctldev, break; case PINMUX_TYPE_GPIO: + case PINMUX_TYPE_INPUT: + case PINMUX_TYPE_OUTPUT: break; default: pr_err("Unsupported mux type (%d), bailing...\n", pinmux_type); - return -ENOTSUPP; + ret = -ENOTSUPP; + goto err; } ret = 0; @@ -276,7 +279,6 @@ static int sh_pfc_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin, unsigned long config) { struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev); - struct sh_pfc *pfc = pmx->pfc; /* Validate the new type */ if (config >= PINMUX_FLAG_TYPE) @@ -326,20 +328,6 @@ static struct pinctrl_desc sh_pfc_pinctrl_desc = { .confops = &sh_pfc_pinconf_ops, }; -int sh_pfc_register_pinctrl(struct sh_pfc *pfc) -{ - sh_pfc_pmx = kzalloc(sizeof(struct sh_pfc_pinctrl), GFP_KERNEL); - if (unlikely(!sh_pfc_pmx)) - return -ENOMEM; - - spin_lock_init(&sh_pfc_pmx->lock); - - sh_pfc_pmx->pfc = pfc; - - return 0; -} -EXPORT_SYMBOL_GPL(sh_pfc_register_pinctrl); - static inline void __devinit sh_pfc_map_one_gpio(struct sh_pfc *pfc, struct sh_pfc_pinctrl *pmx, struct pinmux_gpio *gpio, @@ -481,7 +469,6 @@ static int __devexit sh_pfc_pinctrl_remove(struct platform_device *pdev) { struct sh_pfc_pinctrl *pmx = platform_get_drvdata(pdev); - pinctrl_remove_gpio_range(pmx->pctl, &sh_pfc_gpio_range); pinctrl_unregister(pmx->pctl); platform_set_drvdata(pdev, NULL); @@ -507,7 +494,7 @@ static struct platform_device sh_pfc_pinctrl_device = { .id = -1, }; -static int __init sh_pfc_pinctrl_init(void) +static int sh_pfc_pinctrl_init(void) { int rc; @@ -521,10 +508,22 @@ static int __init sh_pfc_pinctrl_init(void) return rc; } +int sh_pfc_register_pinctrl(struct sh_pfc *pfc) +{ + sh_pfc_pmx = kzalloc(sizeof(struct sh_pfc_pinctrl), GFP_KERNEL); + if (unlikely(!sh_pfc_pmx)) + return -ENOMEM; + + spin_lock_init(&sh_pfc_pmx->lock); + + sh_pfc_pmx->pfc = pfc; + + return sh_pfc_pinctrl_init(); +} +EXPORT_SYMBOL_GPL(sh_pfc_register_pinctrl); + static void __exit sh_pfc_pinctrl_exit(void) { platform_driver_unregister(&sh_pfc_pinctrl_driver); } - -subsys_initcall(sh_pfc_pinctrl_init); module_exit(sh_pfc_pinctrl_exit); diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 6e25ef1bce91f98549e5b514c051fd065deb6fbc..a9f4049c6769316c368a716b0b6707d7082abd25 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -47,6 +47,8 @@ struct bcm63xx_spi { /* Platform data */ u32 speed_hz; unsigned fifo_size; + unsigned int msg_type_shift; + unsigned int msg_ctl_width; /* Data buffers */ const unsigned char *tx_ptr; @@ -221,13 +223,20 @@ static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi, msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); if (t->rx_buf && t->tx_buf) - msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT); + msg_ctl |= (SPI_FD_RW << bs->msg_type_shift); else if (t->rx_buf) - msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT); + msg_ctl |= (SPI_HD_R << bs->msg_type_shift); else if (t->tx_buf) - msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT); - - bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); + msg_ctl |= (SPI_HD_W << bs->msg_type_shift); + + switch (bs->msg_ctl_width) { + case 8: + bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL); + break; + case 16: + bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); + break; + } /* Issue the transfer */ cmd = SPI_CMD_START_IMMEDIATE; @@ -406,9 +415,21 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->transfer_one_message = bcm63xx_spi_transfer_one; master->mode_bits = MODEBITS; bs->speed_hz = pdata->speed_hz; + bs->msg_type_shift = pdata->msg_type_shift; + bs->msg_ctl_width = pdata->msg_ctl_width; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); + switch (bs->msg_ctl_width) { + case 8: + case 16: + break; + default: + dev_err(dev, "unsupported MSG_CTL width: %d\n", + bs->msg_ctl_width); + goto out_clk_disable; + } + /* Initialize hardware */ clk_enable(bs->clk); bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); @@ -438,7 +459,7 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) static int __devexit bcm63xx_spi_remove(struct platform_device *pdev) { - struct spi_master *master = platform_get_drvdata(pdev); + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct bcm63xx_spi *bs = spi_master_get_devdata(master); spi_unregister_master(master); @@ -452,6 +473,8 @@ static int __devexit bcm63xx_spi_remove(struct platform_device *pdev) platform_set_drvdata(pdev, 0); + spi_master_put(master); + return 0; } diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c index b2d4b9e4e0105d53dff9a3c747bd535b6732a6b6..764bfee75920f1779aedf9a0bc78d3280fd2045d 100644 --- a/drivers/spi/spi-coldfire-qspi.c +++ b/drivers/spi/spi-coldfire-qspi.c @@ -533,7 +533,6 @@ static int __devexit mcfqspi_remove(struct platform_device *pdev) iounmap(mcfqspi->iobase); release_mem_region(res->start, resource_size(res)); spi_unregister_master(master); - spi_master_put(master); return 0; } @@ -541,7 +540,7 @@ static int __devexit mcfqspi_remove(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int mcfqspi_suspend(struct device *dev) { - struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); + struct spi_master *master = dev_get_drvdata(dev); struct mcfqspi *mcfqspi = spi_master_get_devdata(master); spi_master_suspend(master); @@ -553,7 +552,7 @@ static int mcfqspi_suspend(struct device *dev) static int mcfqspi_resume(struct device *dev) { - struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); + struct spi_master *master = dev_get_drvdata(dev); struct mcfqspi *mcfqspi = spi_master_get_devdata(master); spi_master_resume(master); diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 7d46b15e1520d0613b02cca28a5206f5123db4db..b2fb141da37565de69139fee9743b153fb463699 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -28,6 +28,8 @@ #include #include #include +#include +#include #include #include #include @@ -39,7 +41,6 @@ #include -#include #include #include @@ -93,8 +94,8 @@ /* We have 2 DMA channels per CS, one for RX and one for TX */ struct omap2_mcspi_dma { - int dma_tx_channel; - int dma_rx_channel; + struct dma_chan *dma_tx; + struct dma_chan *dma_rx; int dma_tx_sync_dev; int dma_rx_sync_dev; @@ -300,20 +301,46 @@ static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) return 0; } +static void omap2_mcspi_rx_callback(void *data) +{ + struct spi_device *spi = data; + struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master); + struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi->chip_select]; + + complete(&mcspi_dma->dma_rx_completion); + + /* We must disable the DMA RX request */ + omap2_mcspi_set_dma_req(spi, 1, 0); +} + +static void omap2_mcspi_tx_callback(void *data) +{ + struct spi_device *spi = data; + struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master); + struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi->chip_select]; + + complete(&mcspi_dma->dma_tx_completion); + + /* We must disable the DMA TX request */ + omap2_mcspi_set_dma_req(spi, 0, 0); +} + static unsigned omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) { struct omap2_mcspi *mcspi; struct omap2_mcspi_cs *cs = spi->controller_state; struct omap2_mcspi_dma *mcspi_dma; - unsigned int count, c; - unsigned long base, tx_reg, rx_reg; - int word_len, data_type, element_count; + unsigned int count; + int word_len, element_count; int elements = 0; u32 l; u8 * rx; const u8 * tx; void __iomem *chstat_reg; + struct dma_slave_config cfg; + enum dma_slave_buswidth width; + unsigned es; mcspi = spi_master_get_devdata(spi->master); mcspi_dma = &mcspi->dma_channels[spi->chip_select]; @@ -321,68 +348,92 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; + if (cs->word_len <= 8) { + width = DMA_SLAVE_BUSWIDTH_1_BYTE; + es = 1; + } else if (cs->word_len <= 16) { + width = DMA_SLAVE_BUSWIDTH_2_BYTES; + es = 2; + } else { + width = DMA_SLAVE_BUSWIDTH_4_BYTES; + es = 4; + } + + memset(&cfg, 0, sizeof(cfg)); + cfg.src_addr = cs->phys + OMAP2_MCSPI_RX0; + cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0; + cfg.src_addr_width = width; + cfg.dst_addr_width = width; + cfg.src_maxburst = 1; + cfg.dst_maxburst = 1; + + if (xfer->tx_buf && mcspi_dma->dma_tx) { + struct dma_async_tx_descriptor *tx; + struct scatterlist sg; + + dmaengine_slave_config(mcspi_dma->dma_tx, &cfg); + + sg_init_table(&sg, 1); + sg_dma_address(&sg) = xfer->tx_dma; + sg_dma_len(&sg) = xfer->len; + + tx = dmaengine_prep_slave_sg(mcspi_dma->dma_tx, &sg, 1, + DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (tx) { + tx->callback = omap2_mcspi_tx_callback; + tx->callback_param = spi; + dmaengine_submit(tx); + } else { + /* FIXME: fall back to PIO? */ + } + } + + if (xfer->rx_buf && mcspi_dma->dma_rx) { + struct dma_async_tx_descriptor *tx; + struct scatterlist sg; + size_t len = xfer->len - es; + + dmaengine_slave_config(mcspi_dma->dma_rx, &cfg); + + if (l & OMAP2_MCSPI_CHCONF_TURBO) + len -= es; + + sg_init_table(&sg, 1); + sg_dma_address(&sg) = xfer->rx_dma; + sg_dma_len(&sg) = len; + + tx = dmaengine_prep_slave_sg(mcspi_dma->dma_rx, &sg, 1, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (tx) { + tx->callback = omap2_mcspi_rx_callback; + tx->callback_param = spi; + dmaengine_submit(tx); + } else { + /* FIXME: fall back to PIO? */ + } + } + count = xfer->len; - c = count; word_len = cs->word_len; - base = cs->phys; - tx_reg = base + OMAP2_MCSPI_TX0; - rx_reg = base + OMAP2_MCSPI_RX0; rx = xfer->rx_buf; tx = xfer->tx_buf; if (word_len <= 8) { - data_type = OMAP_DMA_DATA_TYPE_S8; element_count = count; } else if (word_len <= 16) { - data_type = OMAP_DMA_DATA_TYPE_S16; element_count = count >> 1; } else /* word_len <= 32 */ { - data_type = OMAP_DMA_DATA_TYPE_S32; element_count = count >> 2; } if (tx != NULL) { - omap_set_dma_transfer_params(mcspi_dma->dma_tx_channel, - data_type, element_count, 1, - OMAP_DMA_SYNC_ELEMENT, - mcspi_dma->dma_tx_sync_dev, 0); - - omap_set_dma_dest_params(mcspi_dma->dma_tx_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - tx_reg, 0, 0); - - omap_set_dma_src_params(mcspi_dma->dma_tx_channel, 0, - OMAP_DMA_AMODE_POST_INC, - xfer->tx_dma, 0, 0); - } - - if (rx != NULL) { - elements = element_count - 1; - if (l & OMAP2_MCSPI_CHCONF_TURBO) - elements--; - - omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel, - data_type, elements, 1, - OMAP_DMA_SYNC_ELEMENT, - mcspi_dma->dma_rx_sync_dev, 1); - - omap_set_dma_src_params(mcspi_dma->dma_rx_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - rx_reg, 0, 0); - - omap_set_dma_dest_params(mcspi_dma->dma_rx_channel, 0, - OMAP_DMA_AMODE_POST_INC, - xfer->rx_dma, 0, 0); - } - - if (tx != NULL) { - omap_start_dma(mcspi_dma->dma_tx_channel); + dma_async_issue_pending(mcspi_dma->dma_tx); omap2_mcspi_set_dma_req(spi, 0, 1); } if (rx != NULL) { - omap_start_dma(mcspi_dma->dma_rx_channel); + dma_async_issue_pending(mcspi_dma->dma_rx); omap2_mcspi_set_dma_req(spi, 1, 1); } @@ -408,7 +459,10 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) DMA_FROM_DEVICE); omap2_mcspi_set_enable(spi, 0); + elements = element_count - 1; + if (l & OMAP2_MCSPI_CHCONF_TURBO) { + elements--; if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) & OMAP2_MCSPI_CHSTAT_RXS)) { @@ -725,64 +779,38 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi, return 0; } -static void omap2_mcspi_dma_rx_callback(int lch, u16 ch_status, void *data) -{ - struct spi_device *spi = data; - struct omap2_mcspi *mcspi; - struct omap2_mcspi_dma *mcspi_dma; - - mcspi = spi_master_get_devdata(spi->master); - mcspi_dma = &(mcspi->dma_channels[spi->chip_select]); - - complete(&mcspi_dma->dma_rx_completion); - - /* We must disable the DMA RX request */ - omap2_mcspi_set_dma_req(spi, 1, 0); -} - -static void omap2_mcspi_dma_tx_callback(int lch, u16 ch_status, void *data) -{ - struct spi_device *spi = data; - struct omap2_mcspi *mcspi; - struct omap2_mcspi_dma *mcspi_dma; - - mcspi = spi_master_get_devdata(spi->master); - mcspi_dma = &(mcspi->dma_channels[spi->chip_select]); - - complete(&mcspi_dma->dma_tx_completion); - - /* We must disable the DMA TX request */ - omap2_mcspi_set_dma_req(spi, 0, 0); -} - static int omap2_mcspi_request_dma(struct spi_device *spi) { struct spi_master *master = spi->master; struct omap2_mcspi *mcspi; struct omap2_mcspi_dma *mcspi_dma; + dma_cap_mask_t mask; + unsigned sig; mcspi = spi_master_get_devdata(master); mcspi_dma = mcspi->dma_channels + spi->chip_select; - if (omap_request_dma(mcspi_dma->dma_rx_sync_dev, "McSPI RX", - omap2_mcspi_dma_rx_callback, spi, - &mcspi_dma->dma_rx_channel)) { - dev_err(&spi->dev, "no RX DMA channel for McSPI\n"); + init_completion(&mcspi_dma->dma_rx_completion); + init_completion(&mcspi_dma->dma_tx_completion); + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + sig = mcspi_dma->dma_rx_sync_dev; + mcspi_dma->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig); + if (!mcspi_dma->dma_rx) { + dev_err(&spi->dev, "no RX DMA engine channel for McSPI\n"); return -EAGAIN; } - if (omap_request_dma(mcspi_dma->dma_tx_sync_dev, "McSPI TX", - omap2_mcspi_dma_tx_callback, spi, - &mcspi_dma->dma_tx_channel)) { - omap_free_dma(mcspi_dma->dma_rx_channel); - mcspi_dma->dma_rx_channel = -1; - dev_err(&spi->dev, "no TX DMA channel for McSPI\n"); + sig = mcspi_dma->dma_tx_sync_dev; + mcspi_dma->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig); + if (!mcspi_dma->dma_tx) { + dev_err(&spi->dev, "no TX DMA engine channel for McSPI\n"); + dma_release_channel(mcspi_dma->dma_rx); + mcspi_dma->dma_rx = NULL; return -EAGAIN; } - init_completion(&mcspi_dma->dma_rx_completion); - init_completion(&mcspi_dma->dma_tx_completion); - return 0; } @@ -814,8 +842,7 @@ static int omap2_mcspi_setup(struct spi_device *spi) list_add_tail(&cs->node, &ctx->cs); } - if (mcspi_dma->dma_rx_channel == -1 - || mcspi_dma->dma_tx_channel == -1) { + if (!mcspi_dma->dma_rx || !mcspi_dma->dma_tx) { ret = omap2_mcspi_request_dma(spi); if (ret < 0) return ret; @@ -850,13 +877,13 @@ static void omap2_mcspi_cleanup(struct spi_device *spi) if (spi->chip_select < spi->master->num_chipselect) { mcspi_dma = &mcspi->dma_channels[spi->chip_select]; - if (mcspi_dma->dma_rx_channel != -1) { - omap_free_dma(mcspi_dma->dma_rx_channel); - mcspi_dma->dma_rx_channel = -1; + if (mcspi_dma->dma_rx) { + dma_release_channel(mcspi_dma->dma_rx); + mcspi_dma->dma_rx = NULL; } - if (mcspi_dma->dma_tx_channel != -1) { - omap_free_dma(mcspi_dma->dma_tx_channel); - mcspi_dma->dma_tx_channel = -1; + if (mcspi_dma->dma_tx) { + dma_release_channel(mcspi_dma->dma_tx); + mcspi_dma->dma_tx = NULL; } } } @@ -1176,7 +1203,6 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) break; } - mcspi->dma_channels[i].dma_rx_channel = -1; mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start; sprintf(dma_ch_name, "tx%d", i); dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA, @@ -1187,7 +1213,6 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) break; } - mcspi->dma_channels[i].dma_tx_channel = -1; mcspi->dma_channels[i].dma_tx_sync_dev = dma_res->start; } @@ -1203,18 +1228,16 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) status = spi_register_master(master); if (status < 0) - goto err_spi_register; + goto disable_pm; return status; -err_spi_register: - spi_master_put(master); disable_pm: pm_runtime_disable(&pdev->dev); dma_chnl_free: kfree(mcspi->dma_channels); free_master: - kfree(master); + spi_master_put(master); platform_set_drvdata(pdev, NULL); return status; } diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index aab518ec2bbc234c983be65ec84372740c1e5344..6abbe23c39b4751a3da3fb4d940912771c0fbfbe 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2053,7 +2053,6 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n", adev->res.start, pl022->virtbase); - pm_runtime_enable(dev); pm_runtime_resume(dev); pl022->clk = clk_get(&adev->dev, NULL); diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 646a7657fe62fbb545f95fc771b406d0cad6e5f9..d1c8441f638c39e6ad18d3930cd90b22efe268e5 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -826,7 +826,7 @@ static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata( struct spi_device *spi) { struct s3c64xx_spi_csinfo *cs; - struct device_node *slave_np, *data_np; + struct device_node *slave_np, *data_np = NULL; u32 fb_delay = 0; slave_np = spi->dev.of_node; @@ -1479,40 +1479,40 @@ static const struct dev_pm_ops s3c64xx_spi_pm = { s3c64xx_spi_runtime_resume, NULL) }; -struct s3c64xx_spi_port_config s3c2443_spi_port_config = { +static struct s3c64xx_spi_port_config s3c2443_spi_port_config = { .fifo_lvl_mask = { 0x7f }, .rx_lvl_offset = 13, .tx_st_done = 21, .high_speed = true, }; -struct s3c64xx_spi_port_config s3c6410_spi_port_config = { +static struct s3c64xx_spi_port_config s3c6410_spi_port_config = { .fifo_lvl_mask = { 0x7f, 0x7F }, .rx_lvl_offset = 13, .tx_st_done = 21, }; -struct s3c64xx_spi_port_config s5p64x0_spi_port_config = { +static struct s3c64xx_spi_port_config s5p64x0_spi_port_config = { .fifo_lvl_mask = { 0x1ff, 0x7F }, .rx_lvl_offset = 15, .tx_st_done = 25, }; -struct s3c64xx_spi_port_config s5pc100_spi_port_config = { +static struct s3c64xx_spi_port_config s5pc100_spi_port_config = { .fifo_lvl_mask = { 0x7f, 0x7F }, .rx_lvl_offset = 13, .tx_st_done = 21, .high_speed = true, }; -struct s3c64xx_spi_port_config s5pv210_spi_port_config = { +static struct s3c64xx_spi_port_config s5pv210_spi_port_config = { .fifo_lvl_mask = { 0x1ff, 0x7F }, .rx_lvl_offset = 15, .tx_st_done = 25, .high_speed = true, }; -struct s3c64xx_spi_port_config exynos4_spi_port_config = { +static struct s3c64xx_spi_port_config exynos4_spi_port_config = { .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F }, .rx_lvl_offset = 15, .tx_st_done = 25, diff --git a/drivers/staging/android/android_alarm.h b/drivers/staging/android/android_alarm.h index d0cafd6371996c75e3ee094b2be3168ad14d38b7..f2ffd963f1c348e3986f761b1d2d2b7b75b361e2 100644 --- a/drivers/staging/android/android_alarm.h +++ b/drivers/staging/android/android_alarm.h @@ -51,10 +51,12 @@ enum android_alarm_return_flags { #define ANDROID_ALARM_WAIT _IO('a', 1) #define ALARM_IOW(c, type, size) _IOW('a', (c) | ((type) << 4), size) +#define ALARM_IOR(c, type, size) _IOR('a', (c) | ((type) << 4), size) + /* Set alarm */ #define ANDROID_ALARM_SET(type) ALARM_IOW(2, type, struct timespec) #define ANDROID_ALARM_SET_AND_WAIT(type) ALARM_IOW(3, type, struct timespec) -#define ANDROID_ALARM_GET_TIME(type) ALARM_IOW(4, type, struct timespec) +#define ANDROID_ALARM_GET_TIME(type) ALARM_IOR(4, type, struct timespec) #define ANDROID_ALARM_SET_RTC _IOW('a', 5, struct timespec) #define ANDROID_ALARM_BASE_CMD(cmd) (cmd & ~(_IOC(0, 0, 0xf0, 0))) #define ANDROID_ALARM_IOCTL_TO_TYPE(cmd) (_IOC_NR(cmd) >> 4) diff --git a/drivers/staging/bcm/Misc.c b/drivers/staging/bcm/Misc.c index 9a60d4cd2184aa188e80b946e5ba398bac04943f..f545716c666d06fac279d87bf8cfe69664eb595e 100644 --- a/drivers/staging/bcm/Misc.c +++ b/drivers/staging/bcm/Misc.c @@ -157,12 +157,7 @@ static int create_worker_threads(struct bcm_mini_adapter *psAdapter) static struct file *open_firmware_file(struct bcm_mini_adapter *Adapter, const char *path) { - struct file *flp = NULL; - mm_segment_t oldfs; - oldfs = get_fs(); - set_fs(get_ds()); - flp = filp_open(path, O_RDONLY, S_IRWXU); - set_fs(oldfs); + struct file *flp = filp_open(path, O_RDONLY, S_IRWXU); if (IS_ERR(flp)) { pr_err(DRV_NAME "Unable To Open File %s, err %ld", path, PTR_ERR(flp)); flp = NULL; @@ -183,14 +178,12 @@ static int BcmFileDownload(struct bcm_mini_adapter *Adapter, const char *path, u { int errorno = 0; struct file *flp = NULL; - mm_segment_t oldfs; struct timeval tv = {0}; flp = open_firmware_file(Adapter, path); if (!flp) { - errorno = -ENOENT; BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Unable to Open %s\n", path); - goto exit_download; + return -ENOENT; } BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Opened file is = %s and length =0x%lx to be downloaded at =0x%x", path, (unsigned long)flp->f_dentry->d_inode->i_size, loc); do_gettimeofday(&tv); @@ -201,10 +194,7 @@ static int BcmFileDownload(struct bcm_mini_adapter *Adapter, const char *path, u errorno = -EIO; goto exit_download; } - oldfs = get_fs(); - set_fs(get_ds()); vfs_llseek(flp, 0, 0); - set_fs(oldfs); if (Adapter->bcm_file_readback_from_chip(Adapter->pvInterfaceAdapter, flp, loc)) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Failed to read back firmware!"); errorno = -EIO; @@ -212,12 +202,7 @@ static int BcmFileDownload(struct bcm_mini_adapter *Adapter, const char *path, u } exit_download: - oldfs = get_fs(); - set_fs(get_ds()); - if (flp && !(IS_ERR(flp))) - filp_close(flp, current->files); - set_fs(oldfs); - + filp_close(flp, NULL); return errorno; } @@ -1056,10 +1041,8 @@ int InitCardAndDownloadFirmware(struct bcm_mini_adapter *ps_adapter) static int bcm_parse_target_params(struct bcm_mini_adapter *Adapter) { struct file *flp = NULL; - mm_segment_t oldfs = {0}; char *buff; int len = 0; - loff_t pos = 0; buff = kmalloc(BUFFER_1K, GFP_KERNEL); if (!buff) @@ -1079,20 +1062,16 @@ static int bcm_parse_target_params(struct bcm_mini_adapter *Adapter) Adapter->pstargetparams = NULL; return -ENOENT; } - oldfs = get_fs(); - set_fs(get_ds()); - len = vfs_read(flp, (void __user __force *)buff, BUFFER_1K, &pos); - set_fs(oldfs); + len = kernel_read(flp, 0, buff, BUFFER_1K); + filp_close(flp, NULL); if (len != sizeof(STARGETPARAMS)) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Mismatch in Target Param Structure!\n"); kfree(buff); kfree(Adapter->pstargetparams); Adapter->pstargetparams = NULL; - filp_close(flp, current->files); return -ENOENT; } - filp_close(flp, current->files); /* Check for autolink in config params */ /* diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c index c0fdb00783edbf8583e1e0e0a7f5ab32dbf56dda..2359151af7e107925edd58bbd96203a15057ca31 100644 --- a/drivers/staging/comedi/drivers.c +++ b/drivers/staging/comedi/drivers.c @@ -168,7 +168,7 @@ int comedi_device_attach(struct comedi_device *dev, struct comedi_devconfig *it) dev->board_ptr = comedi_recognize(driv, it->board_name); if (dev->board_ptr) break; - } else if (strcmp(driv->driver_name, it->board_name)) + } else if (strcmp(driv->driver_name, it->board_name) == 0) break; module_put(driv->module); } diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c index 31986608eaf1e932f25f77bcde3685ef66a891a2..6b4d0d68e6372ea1c4d51ac0ebc71e7b78522875 100644 --- a/drivers/staging/comedi/drivers/adv_pci1710.c +++ b/drivers/staging/comedi/drivers/adv_pci1710.c @@ -1349,9 +1349,6 @@ static struct pci_dev *pci1710_find_pci_dev(struct comedi_device *dev, } if (pcidev->vendor != PCI_VENDOR_ID_ADVANTECH) continue; - if (pci_is_enabled(pcidev)) - continue; - if (strcmp(this_board->name, DRV_NAME) == 0) { for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) { if (pcidev->device == boardtypes[i].device_id) { diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c index da5ee69d2c9da856d2c46740288f72812ac41eef..dfde0f6328dd82b29403c54aba0b5a73d4f603e2 100644 --- a/drivers/staging/comedi/drivers/adv_pci1723.c +++ b/drivers/staging/comedi/drivers/adv_pci1723.c @@ -301,8 +301,6 @@ static struct pci_dev *pci1723_find_pci_dev(struct comedi_device *dev, } if (pcidev->vendor != PCI_VENDOR_ID_ADVANTECH) continue; - if (pci_is_enabled(pcidev)) - continue; return pcidev; } dev_err(dev->class_dev, diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c index 97f06dc8e48d002e00d053f068dccdad69310bbe..2d4cb7f638b2a0eeb6df6c371367ba3ac084b9a4 100644 --- a/drivers/staging/comedi/drivers/adv_pci_dio.c +++ b/drivers/staging/comedi/drivers/adv_pci_dio.c @@ -1064,8 +1064,6 @@ static struct pci_dev *pci_dio_find_pci_dev(struct comedi_device *dev, slot != PCI_SLOT(pcidev->devfn)) continue; } - if (pci_is_enabled(pcidev)) - continue; for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) { if (boardtypes[i].vendor_id != pcidev->vendor) continue; diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c index 6c81e377262c204ca8a9354743f344ff824267d5..cc8931fde839c491455ed10beaa56529480fbe2d 100644 --- a/drivers/staging/comedi/drivers/amplc_dio200.c +++ b/drivers/staging/comedi/drivers/amplc_dio200.c @@ -1412,6 +1412,13 @@ static int __devinit dio200_attach_pci(struct comedi_device *dev, dev_err(dev->class_dev, "BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in dio200_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via dio200_attach() + * has been removed. + */ + pci_dev_get(pci_dev); return dio200_pci_common_attach(dev, pci_dev); } diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c index aabba9886b7d9276eb1c4233c89ce894685fbd58..f50287903038bb22772c1c99522c69078fc638c0 100644 --- a/drivers/staging/comedi/drivers/amplc_pc236.c +++ b/drivers/staging/comedi/drivers/amplc_pc236.c @@ -565,6 +565,13 @@ static int __devinit pc236_attach_pci(struct comedi_device *dev, dev_err(dev->class_dev, "BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in pc236_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via pc236_attach() + * has been removed. + */ + pci_dev_get(pci_dev); return pc236_pci_common_attach(dev, pci_dev); } diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c index 40ec1ffebba651fda62f23af21ff7b0e3ef097a4..8191c4e28e0a6849fb53e7def7b4fc1639c79c09 100644 --- a/drivers/staging/comedi/drivers/amplc_pc263.c +++ b/drivers/staging/comedi/drivers/amplc_pc263.c @@ -298,6 +298,13 @@ static int __devinit pc263_attach_pci(struct comedi_device *dev, dev_err(dev->class_dev, "BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in pc263_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via pc263_attach() + * has been removed. + */ + pci_dev_get(pci_dev); return pc263_pci_common_attach(dev, pci_dev); } diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c index 4e17f13e57f6530b2bc3cfd1afc4485d0940d880..8bf109e7bb05cef4c9c50669314289cde734c47c 100644 --- a/drivers/staging/comedi/drivers/amplc_pci224.c +++ b/drivers/staging/comedi/drivers/amplc_pci224.c @@ -1503,6 +1503,13 @@ pci224_attach_pci(struct comedi_device *dev, struct pci_dev *pci_dev) DRIVER_NAME ": BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in pci224_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via pci224_attach() + * has been removed. + */ + pci_dev_get(pci_dev); return pci224_attach_common(dev, pci_dev, NULL); } diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c index 1b67d0c61fa72ff782e02a09dc63b2c14ec5982c..66e74bd12267a565263556f8e6f3389b2c6c41b9 100644 --- a/drivers/staging/comedi/drivers/amplc_pci230.c +++ b/drivers/staging/comedi/drivers/amplc_pci230.c @@ -2925,6 +2925,13 @@ static int __devinit pci230_attach_pci(struct comedi_device *dev, "amplc_pci230: BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in pci230_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via pci230_attach() + * has been removed. + */ + pci_dev_get(pci_dev); return pci230_attach_common(dev, pci_dev); } diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index ef28385c14825808a88181ec2e3ad8cee7cbca10..cad559a1a730775c1d3d1589b995f6381ac28cb7 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -718,7 +718,8 @@ static struct pci_dev *daqboard2000_find_pci_dev(struct comedi_device *dev, continue; } if (pcidev->vendor != PCI_VENDOR_ID_IOTECH || - pcidev->device != 0x0409) + pcidev->device != 0x0409 || + pcidev->subsystem_device != PCI_VENDOR_ID_IOTECH) continue; for (i = 0; i < ARRAY_SIZE(boardtypes); i++) { @@ -739,6 +740,7 @@ static int daqboard2000_attach(struct comedi_device *dev, { struct pci_dev *pcidev; struct comedi_subdevice *s; + resource_size_t pci_base; void *aux_data; unsigned int aux_len; int result; @@ -758,11 +760,12 @@ static int daqboard2000_attach(struct comedi_device *dev, "failed to enable PCI device and request regions\n"); return -EIO; } - dev->iobase = pci_resource_start(pcidev, 2); + dev->iobase = 1; /* the "detach" needs this */ - devpriv->plx = - ioremap(pci_resource_start(pcidev, 0), DAQBOARD2000_PLX_SIZE); - devpriv->daq = ioremap(dev->iobase, DAQBOARD2000_DAQ_SIZE); + pci_base = pci_resource_start(pcidev, 0); + devpriv->plx = ioremap(pci_base, DAQBOARD2000_PLX_SIZE); + pci_base = pci_resource_start(pcidev, 2); + devpriv->daq = ioremap(pci_base, DAQBOARD2000_DAQ_SIZE); if (!devpriv->plx || !devpriv->daq) return -ENOMEM; @@ -799,8 +802,6 @@ static int daqboard2000_attach(struct comedi_device *dev, printk("Interrupt after is: %x\n", interrupt); */ - dev->iobase = (unsigned long)devpriv->daq; - dev->board_name = this_board->name; s = dev->subdevices + 0; @@ -824,7 +825,7 @@ static int daqboard2000_attach(struct comedi_device *dev, s = dev->subdevices + 2; result = subdev_8255_init(dev, s, daqboard2000_8255_cb, - (unsigned long)(dev->iobase + 0x40)); + (unsigned long)(devpriv->daq + 0x40)); out: return result; diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c index 874e02e47668e60a024b350a72822894be801f1a..67a914a10b55fb2333c9ec747ccd907084fc7b6d 100644 --- a/drivers/staging/comedi/drivers/das08.c +++ b/drivers/staging/comedi/drivers/das08.c @@ -378,7 +378,7 @@ das08jr_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, int chan; lsb = data[0] & 0xff; - msb = (data[0] >> 8) & 0xf; + msb = (data[0] >> 8) & 0xff; chan = CR_CHAN(insn->chanspec); @@ -623,7 +623,7 @@ static const struct das08_board_struct das08_boards[] = { .ai = das08_ai_rinsn, .ai_nbits = 16, .ai_pg = das08_pg_none, - .ai_encoding = das08_encode12, + .ai_encoding = das08_encode16, .ao = das08jr_ao_winsn, .ao_nbits = 16, .di = das08jr_di_rbits, @@ -922,6 +922,13 @@ das08_attach_pci(struct comedi_device *dev, struct pci_dev *pdev) dev_err(dev->class_dev, "BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in das08_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via das08_attach() + * has been removed. + */ + pci_dev_get(pdev); return das08_pci_attach_common(dev, pdev); } diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c index a6fe6c9be87eb1599e59f995245f0958095be5a5..3476cda0fff04e8e7df1f3f716f94a2406c799e5 100644 --- a/drivers/staging/comedi/drivers/dt3000.c +++ b/drivers/staging/comedi/drivers/dt3000.c @@ -804,6 +804,7 @@ static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct pci_dev *pcidev; struct comedi_subdevice *s; + resource_size_t pci_base; int ret = 0; dev_dbg(dev->class_dev, "dt3000:\n"); @@ -820,9 +821,10 @@ static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it) ret = comedi_pci_enable(pcidev, "dt3000"); if (ret < 0) return ret; + dev->iobase = 1; /* the "detach" needs this */ - dev->iobase = pci_resource_start(pcidev, 0); - devpriv->io_addr = ioremap(dev->iobase, DT3000_SIZE); + pci_base = pci_resource_start(pcidev, 0); + devpriv->io_addr = ioremap(pci_base, DT3000_SIZE); if (!devpriv->io_addr) return -ENOMEM; diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 112fdc3e9c69dddcf64c322194b3d4a3d275b6bf..5aa8be1e7b9217cb6027d3652e134a3f17f1b300 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -1619,9 +1619,8 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) struct rtdPrivate *devpriv; struct pci_dev *pcidev; struct comedi_subdevice *s; + resource_size_t pci_base; int ret; - resource_size_t physLas1; /* data area */ - resource_size_t physLcfg; /* PLX9080 */ #ifdef USE_DMA int index; #endif @@ -1655,20 +1654,15 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) printk(KERN_INFO "Failed to enable PCI device and request regions.\n"); return ret; } - - /* - * Initialize base addresses - */ - /* Get the physical address from PCI config */ - dev->iobase = pci_resource_start(pcidev, LAS0_PCIINDEX); - physLas1 = pci_resource_start(pcidev, LAS1_PCIINDEX); - physLcfg = pci_resource_start(pcidev, LCFG_PCIINDEX); - /* Now have the kernel map this into memory */ - /* ASSUME page aligned */ - devpriv->las0 = ioremap_nocache(dev->iobase, LAS0_PCISIZE); - devpriv->las1 = ioremap_nocache(physLas1, LAS1_PCISIZE); - devpriv->lcfg = ioremap_nocache(physLcfg, LCFG_PCISIZE); - + dev->iobase = 1; /* the "detach" needs this */ + + /* Initialize the base addresses */ + pci_base = pci_resource_start(pcidev, LAS0_PCIINDEX); + devpriv->las0 = ioremap_nocache(pci_base, LAS0_PCISIZE); + pci_base = pci_resource_start(pcidev, LAS1_PCIINDEX); + devpriv->las1 = ioremap_nocache(pci_base, LAS1_PCISIZE); + pci_base = pci_resource_start(pcidev, LCFG_PCIINDEX); + devpriv->lcfg = ioremap_nocache(pci_base, LCFG_PCISIZE); if (!devpriv->las0 || !devpriv->las1 || !devpriv->lcfg) return -ENOMEM; diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 848c7ec06976dfdebb68fdea580e6fc1333ede33..11ee83681da7744fc7efdf2cd62063ed0c514311 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -102,6 +102,7 @@ sampling rate. If you sample two channels you get 4kHz and so on. #define BULK_TIMEOUT 1000 /* constants for "firmware" upload and download */ +#define FIRMWARE "usbdux_firmware.bin" #define USBDUXSUB_FIRMWARE 0xA0 #define VENDOR_DIR_IN 0xC0 #define VENDOR_DIR_OUT 0x40 @@ -2791,7 +2792,7 @@ static int usbdux_usb_probe(struct usb_interface *uinterf, ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, - "usbdux_firmware.bin", + FIRMWARE, &udev->dev, GFP_KERNEL, usbduxsub + index, @@ -2850,3 +2851,4 @@ module_comedi_usb_driver(usbdux_driver, usbdux_usb_driver); MODULE_AUTHOR("Bernd Porr, BerndPorr@f2s.com"); MODULE_DESCRIPTION("Stirling/ITL USB-DUX -- Bernd.Porr@f2s.com"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE); diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c index d9911588c10a9f2ecad8cd528a795270071e54f1..8eb41257c6ceca4dd9be11e997f95853dafdcdf2 100644 --- a/drivers/staging/comedi/drivers/usbduxfast.c +++ b/drivers/staging/comedi/drivers/usbduxfast.c @@ -57,6 +57,7 @@ /* * constants for "firmware" upload and download */ +#define FIRMWARE "usbduxfast_firmware.bin" #define USBDUXFASTSUB_FIRMWARE 0xA0 #define VENDOR_DIR_IN 0xC0 #define VENDOR_DIR_OUT 0x40 @@ -1706,7 +1707,7 @@ static int usbduxfast_usb_probe(struct usb_interface *uinterf, ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, - "usbduxfast_firmware.bin", + FIRMWARE, &udev->dev, GFP_KERNEL, usbduxfastsub + index, @@ -1774,3 +1775,4 @@ module_comedi_usb_driver(usbduxfast_driver, usbduxfast_usb_driver); MODULE_AUTHOR("Bernd Porr, BerndPorr@f2s.com"); MODULE_DESCRIPTION("USB-DUXfast, BerndPorr@f2s.com"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE); diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c index 543e604791e2719c16378a05ef8ad31a9ce7208b..f54ab8c2fcfd3604935fac8dd76f18b0f19bd034 100644 --- a/drivers/staging/comedi/drivers/usbduxsigma.c +++ b/drivers/staging/comedi/drivers/usbduxsigma.c @@ -63,6 +63,7 @@ Status: testing #define BULK_TIMEOUT 1000 /* constants for "firmware" upload and download */ +#define FIRMWARE "usbduxsigma_firmware.bin" #define USBDUXSUB_FIRMWARE 0xA0 #define VENDOR_DIR_IN 0xC0 #define VENDOR_DIR_OUT 0x40 @@ -2780,7 +2781,7 @@ static int usbduxsigma_usb_probe(struct usb_interface *uinterf, ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, - "usbduxsigma_firmware.bin", + FIRMWARE, &udev->dev, GFP_KERNEL, usbduxsub + index, @@ -2845,3 +2846,4 @@ module_comedi_usb_driver(usbduxsigma_driver, usbduxsigma_usb_driver); MODULE_AUTHOR("Bernd Porr, BerndPorr@f2s.com"); MODULE_DESCRIPTION("Stirling/ITL USB-DUX SIGMA -- Bernd.Porr@f2s.com"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE); diff --git a/drivers/staging/csr/Kconfig b/drivers/staging/csr/Kconfig index cee8d48d2af91337006f8b852deddf8614d1adaa..ad2a1096e920c4008a7314f10691aadf4fddfcd9 100644 --- a/drivers/staging/csr/Kconfig +++ b/drivers/staging/csr/Kconfig @@ -1,6 +1,6 @@ config CSR_WIFI tristate "CSR wireless driver" - depends on MMC && CFG80211_WEXT + depends on MMC && CFG80211_WEXT && INET select WIRELESS_EXT select WEXT_PRIV help diff --git a/drivers/staging/gdm72xx/sdio_boot.c b/drivers/staging/gdm72xx/sdio_boot.c index 760efee23d4a875ff1f3d402812af161f7f10f29..65624bca8b3ab354f0cfb312bff1f69229a59357 100644 --- a/drivers/staging/gdm72xx/sdio_boot.c +++ b/drivers/staging/gdm72xx/sdio_boot.c @@ -66,9 +66,8 @@ static int download_image(struct sdio_func *func, char *img_name) return -ENOENT; } - if (filp->f_dentry) - inode = filp->f_dentry->d_inode; - if (!inode || !S_ISREG(inode->i_mode)) { + inode = filp->f_dentry->d_inode; + if (!S_ISREG(inode->i_mode)) { printk(KERN_ERR "Invalid file type: %s\n", img_name); ret = -EINVAL; goto out; @@ -123,7 +122,7 @@ static int download_image(struct sdio_func *func, char *img_name) pno++; } out: - filp_close(filp, current->files); + filp_close(filp, NULL); return ret; } diff --git a/drivers/staging/gdm72xx/usb_boot.c b/drivers/staging/gdm72xx/usb_boot.c index fef290c38db67ae8620a8ff92179275fb564730b..e3dbd5a552ca00c1349f2ea7f20fc629a7ddc5e5 100644 --- a/drivers/staging/gdm72xx/usb_boot.c +++ b/drivers/staging/gdm72xx/usb_boot.c @@ -173,14 +173,12 @@ int usb_boot(struct usb_device *usbdev, u16 pid) filp = filp_open(img_name, O_RDONLY | O_LARGEFILE, 0); if (IS_ERR(filp)) { printk(KERN_ERR "Can't find %s.\n", img_name); - set_fs(fs); ret = PTR_ERR(filp); goto restore_fs; } - if (filp->f_dentry) - inode = filp->f_dentry->d_inode; - if (!inode || !S_ISREG(inode->i_mode)) { + inode = filp->f_dentry->d_inode; + if (!S_ISREG(inode->i_mode)) { printk(KERN_ERR "Invalid file type: %s\n", img_name); ret = -EINVAL; goto out; @@ -262,7 +260,7 @@ int usb_boot(struct usb_device *usbdev, u16 pid) ret = -EINVAL; } out: - filp_close(filp, current->files); + filp_close(filp, NULL); restore_fs: set_fs(fs); @@ -322,13 +320,11 @@ static int em_download_image(struct usb_device *usbdev, char *path, goto restore_fs; } - if (filp->f_dentry) { - inode = filp->f_dentry->d_inode; - if (!inode || !S_ISREG(inode->i_mode)) { - printk(KERN_ERR "Invalid file type: %s\n", path); - ret = -EINVAL; - goto out; - } + inode = filp->f_dentry->d_inode; + if (!S_ISREG(inode->i_mode)) { + printk(KERN_ERR "Invalid file type: %s\n", path); + ret = -EINVAL; + goto out; } buf = kmalloc(DOWNLOAD_CHUCK + pad_size, GFP_KERNEL); @@ -364,7 +360,7 @@ static int em_download_image(struct usb_device *usbdev, char *path, goto out; out: - filp_close(filp, current->files); + filp_close(filp, NULL); restore_fs: set_fs(fs); diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c index 18d108fd967a908817efa70d1056fcba35d00458..f3da59063ed2e5a8c934ed201f1add435810028a 100644 --- a/drivers/staging/iio/accel/lis3l02dq_ring.c +++ b/drivers/staging/iio/accel/lis3l02dq_ring.c @@ -121,8 +121,10 @@ static int lis3l02dq_get_buffer_element(struct iio_dev *indio_dev, if (rx_array == NULL) return -ENOMEM; ret = lis3l02dq_read_all(indio_dev, rx_array); - if (ret < 0) + if (ret < 0) { + kfree(rx_array); return ret; + } for (i = 0; i < scan_count; i++) data[i] = combine_8_to_16(rx_array[i*4+1], rx_array[i*4+3]); diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 22c3923d55eb34fc31c1313a570498d31dcb95a1..19a064d649e3f72a783dd2b2ffc2e6a385175216 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -647,6 +647,8 @@ static ssize_t ad7192_write_frequency(struct device *dev, ret = strict_strtoul(buf, 10, &lval); if (ret) return ret; + if (lval == 0) + return -EINVAL; mutex_lock(&indio_dev->mlock); if (iio_buffer_enabled(indio_dev)) { @@ -754,7 +756,7 @@ static ssize_t ad7192_set(struct device *dev, else st->mode &= ~AD7192_MODE_ACX; - ad7192_write_reg(st, AD7192_REG_GPOCON, 3, st->mode); + ad7192_write_reg(st, AD7192_REG_MODE, 3, st->mode); break; default: ret = -EINVAL; @@ -798,6 +800,11 @@ static const struct attribute_group ad7195_attribute_group = { .attrs = ad7195_attributes, }; +static unsigned int ad7192_get_temp_scale(bool unipolar) +{ + return unipolar ? 2815 * 2 : 2815; +} + static int ad7192_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, @@ -824,19 +831,6 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, *val = (smpl >> chan->scan_type.shift) & ((1 << (chan->scan_type.realbits)) - 1); - switch (chan->type) { - case IIO_VOLTAGE: - if (!unipolar) - *val -= (1 << (chan->scan_type.realbits - 1)); - break; - case IIO_TEMP: - *val -= 0x800000; - *val /= 2815; /* temp Kelvin */ - *val -= 273; /* temp Celsius */ - break; - default: - return -EINVAL; - } return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: @@ -848,11 +842,21 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, mutex_unlock(&indio_dev->mlock); return IIO_VAL_INT_PLUS_NANO; case IIO_TEMP: - *val = 1000; - return IIO_VAL_INT; + *val = 0; + *val2 = 1000000000 / ad7192_get_temp_scale(unipolar); + return IIO_VAL_INT_PLUS_NANO; default: return -EINVAL; } + case IIO_CHAN_INFO_OFFSET: + if (!unipolar) + *val = -(1 << (chan->scan_type.realbits - 1)); + else + *val = 0; + /* Kelvin to Celsius */ + if (chan->type == IIO_TEMP) + *val -= 273 * ad7192_get_temp_scale(unipolar); + return IIO_VAL_INT; } return -EINVAL; @@ -890,7 +894,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev, } ret = 0; } - + break; default: ret = -EINVAL; } @@ -942,20 +946,22 @@ static const struct iio_info ad7195_info = { .channel = _chan, \ .channel2 = _chan2, \ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ - IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_OFFSET_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ - .scan_type = IIO_ST('s', 24, 32, 0)} + .scan_type = IIO_ST('u', 24, 32, 0)} #define AD7192_CHAN(_chan, _address, _si) \ { .type = IIO_VOLTAGE, \ .indexed = 1, \ .channel = _chan, \ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ - IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_OFFSET_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ - .scan_type = IIO_ST('s', 24, 32, 0)} + .scan_type = IIO_ST('u', 24, 32, 0)} #define AD7192_CHAN_TEMP(_chan, _address, _si) \ { .type = IIO_TEMP, \ @@ -965,7 +971,7 @@ static const struct iio_info ad7195_info = { IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ .address = _address, \ .scan_index = _si, \ - .scan_type = IIO_ST('s', 24, 32, 0)} + .scan_type = IIO_ST('u', 24, 32, 0)} static struct iio_chan_spec ad7192_channels[] = { AD7192_CHAN_DIFF(1, 2, NULL, AD7192_CH_AIN1P_AIN2M, 0), diff --git a/drivers/staging/iio/adc/ad7298_ring.c b/drivers/staging/iio/adc/ad7298_ring.c index fd1d855ff57a1c5e2b3786afbc67f5303767a76e..506016f01593c6bdd7a68279f19fa1363b2d21f8 100644 --- a/drivers/staging/iio/adc/ad7298_ring.c +++ b/drivers/staging/iio/adc/ad7298_ring.c @@ -76,7 +76,7 @@ static irqreturn_t ad7298_trigger_handler(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct ad7298_state *st = iio_priv(indio_dev); struct iio_buffer *ring = indio_dev->buffer; - s64 time_ns; + s64 time_ns = 0; __u16 buf[16]; int b_sent, i; diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c index 1ece2ac8de56965ea0af82c378244da50bdfdece..19ee49c95de49725e4dfdb62c0e4805a9215cce4 100644 --- a/drivers/staging/iio/adc/ad7780.c +++ b/drivers/staging/iio/adc/ad7780.c @@ -131,9 +131,10 @@ static const struct ad7780_chip_info ad7780_chip_info_tbl[] = { .indexed = 1, .channel = 0, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_type = { - .sign = 's', + .sign = 'u', .realbits = 24, .storagebits = 32, .shift = 8, @@ -146,9 +147,10 @@ static const struct ad7780_chip_info ad7780_chip_info_tbl[] = { .indexed = 1, .channel = 0, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_type = { - .sign = 's', + .sign = 'u', .realbits = 20, .storagebits = 32, .shift = 12, diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 76fdd7145fc5d855544c977560dfc3803baa7b95..112e2b7b5bc4a5b1c459081ec23f624b3eed5f9f 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -563,8 +563,9 @@ static ssize_t ad7793_show_scale_available(struct device *dev, return len; } -static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, in-in_scale_available, - S_IRUGO, ad7793_show_scale_available, NULL, 0); +static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, + in_voltage-voltage_scale_available, S_IRUGO, + ad7793_show_scale_available, NULL, 0); static struct attribute *ad7793_attributes[] = { &iio_dev_attr_sampling_frequency.dev_attr.attr, @@ -604,9 +605,6 @@ static int ad7793_read_raw(struct iio_dev *indio_dev, *val = (smpl >> chan->scan_type.shift) & ((1 << (chan->scan_type.realbits)) - 1); - if (!unipolar) - *val -= (1 << (chan->scan_type.realbits - 1)); - return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: @@ -620,25 +618,38 @@ static int ad7793_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT_PLUS_NANO; } else { /* 1170mV / 2^23 * 6 */ - scale_uv = (1170ULL * 100000000ULL * 6ULL) - >> (chan->scan_type.realbits - - (unipolar ? 0 : 1)); + scale_uv = (1170ULL * 100000000ULL * 6ULL); } break; case IIO_TEMP: - /* Always uses unity gain and internal ref */ - scale_uv = (2500ULL * 100000000ULL) - >> (chan->scan_type.realbits - - (unipolar ? 0 : 1)); + /* 1170mV / 0.81 mV/C / 2^23 */ + scale_uv = 1444444444444ULL; break; default: return -EINVAL; } - *val2 = do_div(scale_uv, 100000000) * 10; - *val = scale_uv; - + scale_uv >>= (chan->scan_type.realbits - (unipolar ? 0 : 1)); + *val = 0; + *val2 = scale_uv; return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_OFFSET: + if (!unipolar) + *val = -(1 << (chan->scan_type.realbits - 1)); + else + *val = 0; + + /* Kelvin to Celsius */ + if (chan->type == IIO_TEMP) { + unsigned long long offset; + unsigned int shift; + + shift = chan->scan_type.realbits - (unipolar ? 0 : 1); + offset = 273ULL << shift; + do_div(offset, 1444); + *val -= offset; + } + return IIO_VAL_INT; } return -EINVAL; } @@ -676,7 +687,7 @@ static int ad7793_write_raw(struct iio_dev *indio_dev, } ret = 0; } - + break; default: ret = -EINVAL; } @@ -720,9 +731,10 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 0, .address = AD7793_CH_AIN1P_AIN1M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 0, - .scan_type = IIO_ST('s', 24, 32, 0) + .scan_type = IIO_ST('u', 24, 32, 0) }, .channel[1] = { .type = IIO_VOLTAGE, @@ -732,9 +744,10 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 1, .address = AD7793_CH_AIN2P_AIN2M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 1, - .scan_type = IIO_ST('s', 24, 32, 0) + .scan_type = IIO_ST('u', 24, 32, 0) }, .channel[2] = { .type = IIO_VOLTAGE, @@ -744,9 +757,10 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 2, .address = AD7793_CH_AIN3P_AIN3M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 2, - .scan_type = IIO_ST('s', 24, 32, 0) + .scan_type = IIO_ST('u', 24, 32, 0) }, .channel[3] = { .type = IIO_VOLTAGE, @@ -757,9 +771,10 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 2, .address = AD7793_CH_AIN1M_AIN1M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 3, - .scan_type = IIO_ST('s', 24, 32, 0) + .scan_type = IIO_ST('u', 24, 32, 0) }, .channel[4] = { .type = IIO_TEMP, @@ -769,7 +784,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 4, - .scan_type = IIO_ST('s', 24, 32, 0), + .scan_type = IIO_ST('u', 24, 32, 0), }, .channel[5] = { .type = IIO_VOLTAGE, @@ -778,9 +793,10 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 4, .address = AD7793_CH_AVDD_MONITOR, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 5, - .scan_type = IIO_ST('s', 24, 32, 0), + .scan_type = IIO_ST('u', 24, 32, 0), }, .channel[6] = IIO_CHAN_SOFT_TIMESTAMP(6), }, @@ -793,9 +809,10 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 0, .address = AD7793_CH_AIN1P_AIN1M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 0, - .scan_type = IIO_ST('s', 16, 32, 0) + .scan_type = IIO_ST('u', 16, 32, 0) }, .channel[1] = { .type = IIO_VOLTAGE, @@ -805,9 +822,10 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 1, .address = AD7793_CH_AIN2P_AIN2M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 1, - .scan_type = IIO_ST('s', 16, 32, 0) + .scan_type = IIO_ST('u', 16, 32, 0) }, .channel[2] = { .type = IIO_VOLTAGE, @@ -817,9 +835,10 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 2, .address = AD7793_CH_AIN3P_AIN3M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 2, - .scan_type = IIO_ST('s', 16, 32, 0) + .scan_type = IIO_ST('u', 16, 32, 0) }, .channel[3] = { .type = IIO_VOLTAGE, @@ -830,9 +849,10 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 2, .address = AD7793_CH_AIN1M_AIN1M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 3, - .scan_type = IIO_ST('s', 16, 32, 0) + .scan_type = IIO_ST('u', 16, 32, 0) }, .channel[4] = { .type = IIO_TEMP, @@ -842,7 +862,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 4, - .scan_type = IIO_ST('s', 16, 32, 0), + .scan_type = IIO_ST('u', 16, 32, 0), }, .channel[5] = { .type = IIO_VOLTAGE, @@ -851,9 +871,10 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 4, .address = AD7793_CH_AVDD_MONITOR, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 5, - .scan_type = IIO_ST('s', 16, 32, 0), + .scan_type = IIO_ST('u', 16, 32, 0), }, .channel[6] = IIO_CHAN_SOFT_TIMESTAMP(6), }, @@ -901,7 +922,7 @@ static int __devinit ad7793_probe(struct spi_device *spi) else if (voltage_uv) st->int_vref_mv = voltage_uv / 1000; else - st->int_vref_mv = 2500; /* Build-in ref */ + st->int_vref_mv = 1170; /* Build-in ref */ spi_set_drvdata(spi, indio_dev); st->spi = spi; diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c index 93aa431287ac6efb17d9b5172c337f67be30365a..eb8e9d69efd3f39ab42a788f70c8eb1d4b105bf2 100644 --- a/drivers/staging/iio/gyro/adis16260_core.c +++ b/drivers/staging/iio/gyro/adis16260_core.c @@ -195,6 +195,8 @@ static ssize_t adis16260_write_frequency(struct device *dev, ret = strict_strtol(buf, 10, &val); if (ret) return ret; + if (val == 0) + return -EINVAL; mutex_lock(&indio_dev->mlock); if (spi_get_device_id(st->us)) { diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c index 1f4c17779b5a64e18f48865aa6ecb0e6d49387f4..a618327e06edf2c3374b38b425771b4a823517f2 100644 --- a/drivers/staging/iio/imu/adis16400_core.c +++ b/drivers/staging/iio/imu/adis16400_core.c @@ -234,6 +234,8 @@ static ssize_t adis16400_write_frequency(struct device *dev, ret = strict_strtol(buf, 10, &val); if (ret) return ret; + if (val == 0) + return -EINVAL; mutex_lock(&indio_dev->mlock); diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c index f04ece7fbc2fbe3d33b61dd3387e1cb0b53b23c5..3ccff189f258232cd4704acc2d8674029cf190b1 100644 --- a/drivers/staging/iio/meter/ade7753.c +++ b/drivers/staging/iio/meter/ade7753.c @@ -425,6 +425,8 @@ static ssize_t ade7753_write_frequency(struct device *dev, ret = strict_strtol(buf, 10, &val); if (ret) return ret; + if (val == 0) + return -EINVAL; mutex_lock(&indio_dev->mlock); diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c index 6cee28a5e87731bee476ab4efc7c0501c89cff45..abb1e9c8d0947adcd1bc6d5567b9620496207c5e 100644 --- a/drivers/staging/iio/meter/ade7754.c +++ b/drivers/staging/iio/meter/ade7754.c @@ -445,6 +445,8 @@ static ssize_t ade7754_write_frequency(struct device *dev, ret = strict_strtol(buf, 10, &val); if (ret) return ret; + if (val == 0) + return -EINVAL; mutex_lock(&indio_dev->mlock); diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c index b3f7e0fa96124b6ce8d719d63fce6e45df210d0f..eb0a2a98f3886afe1948b284c2ede98094a95754 100644 --- a/drivers/staging/iio/meter/ade7759.c +++ b/drivers/staging/iio/meter/ade7759.c @@ -385,6 +385,8 @@ static ssize_t ade7759_write_frequency(struct device *dev, ret = strict_strtol(buf, 10, &val); if (ret) return ret; + if (val == 0) + return -EINVAL; mutex_lock(&indio_dev->mlock); diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 4f4b7d6281a7c0624b63cbf3ba7d41ca4d4f0070..427218b8b10f435e5f9dcd7dbc3751a572b0566f 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -25,8 +25,6 @@ source "drivers/staging/media/cxd2099/Kconfig" source "drivers/staging/media/dt3155v4l/Kconfig" -source "drivers/staging/media/easycap/Kconfig" - source "drivers/staging/media/go7007/Kconfig" source "drivers/staging/media/solo6x10/Kconfig" diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index c69124cdb0d3af91d022af72bda59627ef9e2062..aec6eb96394033c156a9731a5503f813c9193393 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -1,6 +1,5 @@ obj-$(CONFIG_DVB_AS102) += as102/ obj-$(CONFIG_DVB_CXD2099) += cxd2099/ -obj-$(CONFIG_EASYCAP) += easycap/ obj-$(CONFIG_LIRC_STAGING) += lirc/ obj-$(CONFIG_SOLO6X10) += solo6x10/ obj-$(CONFIG_VIDEO_DT3155) += dt3155v4l/ diff --git a/drivers/staging/media/as102/Makefile b/drivers/staging/media/as102/Makefile index 1bca43e847c7c0c301e6d711ea128e96e7db58c5..d8dfb757f1e2f829ede7f0cd5720542f584aff25 100644 --- a/drivers/staging/media/as102/Makefile +++ b/drivers/staging/media/as102/Makefile @@ -3,4 +3,4 @@ dvb-as102-objs := as102_drv.o as102_fw.o as10x_cmd.o as10x_cmd_stream.o \ obj-$(CONFIG_DVB_AS102) += dvb-as102.o -EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core +EXTRA_CFLAGS += -Idrivers/media/dvb-core diff --git a/drivers/staging/media/cxd2099/Makefile b/drivers/staging/media/cxd2099/Makefile index 64cfc77be357a223abe90936528657c7962be71b..b2905e65057c78179b3e6f68367614c8e81bb4e6 100644 --- a/drivers/staging/media/cxd2099/Makefile +++ b/drivers/staging/media/cxd2099/Makefile @@ -1,5 +1,5 @@ obj-$(CONFIG_DVB_CXD2099) += cxd2099.o -ccflags-y += -Idrivers/media/dvb/dvb-core/ -ccflags-y += -Idrivers/media/dvb/frontends/ -ccflags-y += -Idrivers/media/common/tuners/ +ccflags-y += -Idrivers/media/dvb-core/ +ccflags-y += -Idrivers/media/dvb-frontends/ +ccflags-y += -Idrivers/media/tuners/ diff --git a/drivers/staging/media/cxd2099/cxd2099.c b/drivers/staging/media/cxd2099/cxd2099.c index 1c04185bcfd72d95bfe08a2b426fb9e1c1aaef6e..0ff19724992fbe5de688620d22a4396ea0f381ef 100644 --- a/drivers/staging/media/cxd2099/cxd2099.c +++ b/drivers/staging/media/cxd2099/cxd2099.c @@ -683,27 +683,26 @@ struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg, void *priv, struct i2c_adapter *i2c) { - struct cxd *ci = 0; + struct cxd *ci; u8 val; if (i2c_read_reg(i2c, cfg->adr, 0, &val) < 0) { printk(KERN_INFO "No CXD2099 detected at %02x\n", cfg->adr); - return 0; + return NULL; } - ci = kmalloc(sizeof(struct cxd), GFP_KERNEL); + ci = kzalloc(sizeof(struct cxd), GFP_KERNEL); if (!ci) - return 0; - memset(ci, 0, sizeof(*ci)); + return NULL; mutex_init(&ci->lock); - memcpy(&ci->cfg, cfg, sizeof(struct cxd2099_cfg)); + ci->cfg = *cfg; ci->i2c = i2c; ci->lastaddress = 0xff; ci->clk_reg_b = 0x4a; ci->clk_reg_f = 0x1b; - memcpy(&ci->en, &en_templ, sizeof(en_templ)); + ci->en = en_templ; ci->en.data = ci; init(ci); printk(KERN_INFO "Attached CXD2099AR at %02x\n", ci->cfg.adr); diff --git a/drivers/staging/media/dt3155v4l/dt3155v4l.c b/drivers/staging/media/dt3155v4l/dt3155v4l.c index ebe5a27c06f5b97219f3f306f9f6d16744b402e4..2e7b711c850135053c14a1ff3291ba9d8bac8649 100644 --- a/drivers/staging/media/dt3155v4l/dt3155v4l.c +++ b/drivers/staging/media/dt3155v4l/dt3155v4l.c @@ -381,6 +381,8 @@ dt3155_open(struct file *filp) int ret = 0; struct dt3155_priv *pd = video_drvdata(filp); + if (mutex_lock_interruptible(&pd->mux)) + return -ERESTARTSYS; if (!pd->users) { pd->q = kzalloc(sizeof(*pd->q), GFP_KERNEL); if (!pd->q) { @@ -411,6 +413,7 @@ dt3155_open(struct file *filp) kfree(pd->q); pd->q = NULL; err_alloc_queue: + mutex_unlock(&pd->mux); return ret; } @@ -419,6 +422,7 @@ dt3155_release(struct file *filp) { struct dt3155_priv *pd = video_drvdata(filp); + mutex_lock(&pd->mux); pd->users--; BUG_ON(pd->users < 0); if (!pd->users) { @@ -429,6 +433,7 @@ dt3155_release(struct file *filp) kfree(pd->q); pd->q = NULL; } + mutex_unlock(&pd->mux); return 0; } @@ -436,24 +441,38 @@ static ssize_t dt3155_read(struct file *filp, char __user *user, size_t size, loff_t *loff) { struct dt3155_priv *pd = video_drvdata(filp); + ssize_t res; - return vb2_read(pd->q, user, size, loff, filp->f_flags & O_NONBLOCK); + if (mutex_lock_interruptible(&pd->mux)) + return -ERESTARTSYS; + res = vb2_read(pd->q, user, size, loff, filp->f_flags & O_NONBLOCK); + mutex_unlock(&pd->mux); + return res; } static unsigned int dt3155_poll(struct file *filp, struct poll_table_struct *polltbl) { struct dt3155_priv *pd = video_drvdata(filp); + unsigned int res; - return vb2_poll(pd->q, filp, polltbl); + mutex_lock(&pd->mux); + res = vb2_poll(pd->q, filp, polltbl); + mutex_unlock(&pd->mux); + return res; } static int dt3155_mmap(struct file *filp, struct vm_area_struct *vma) { struct dt3155_priv *pd = video_drvdata(filp); + int res; - return vb2_mmap(pd->q, vma); + if (mutex_lock_interruptible(&pd->mux)) + return -ERESTARTSYS; + res = vb2_mmap(pd->q, vma); + mutex_unlock(&pd->mux); + return res; } static const struct v4l2_file_operations dt3155_fops = { @@ -898,10 +917,6 @@ dt3155_probe(struct pci_dev *pdev, const struct pci_device_id *id) INIT_LIST_HEAD(&pd->dmaq); mutex_init(&pd->mux); pd->vdev->lock = &pd->mux; /* for locking v4l2_file_operations */ - /* Locking in file operations other than ioctl should be done - by the driver, not the V4L2 core. - This driver needs auditing so that this flag can be removed. */ - set_bit(V4L2_FL_LOCK_ALL_FOPS, &pd->vdev->flags); spin_lock_init(&pd->lock); pd->csr2 = csr2_init; pd->config = config_init; diff --git a/drivers/staging/media/easycap/Kconfig b/drivers/staging/media/easycap/Kconfig deleted file mode 100644 index a425a6f9cdcaf39dda0804393dda95ae4af34514..0000000000000000000000000000000000000000 --- a/drivers/staging/media/easycap/Kconfig +++ /dev/null @@ -1,30 +0,0 @@ -config EASYCAP - tristate "EasyCAP USB ID 05e1:0408 support" - depends on USB && VIDEO_DEV && SND - select SND_PCM - - ---help--- - This is an integrated audio/video driver for EasyCAP cards with - USB ID 05e1:0408. It supports two hardware variants: - - * EasyCAP USB 2.0 Video Adapter with Audio, Model DC60, - having input cables labelled CVBS, S-VIDEO, AUDIO(L), AUDIO(R) - - * EasyCAP002 4-Channel USB 2.0 DVR, having input cables labelled - 1, 2, 3, 4 and an unlabelled input cable for a microphone. - - To compile this driver as a module, choose M here: the - module will be called easycap - -config EASYCAP_DEBUG - bool "Enable EasyCAP driver debugging" - depends on EASYCAP - - ---help--- - This option enables debug printouts - - To enable debug, pass the debug level to the debug module - parameter: - - modprobe easycap debug=[0..9] - diff --git a/drivers/staging/media/easycap/Makefile b/drivers/staging/media/easycap/Makefile deleted file mode 100644 index a34e75f59c189f263aabdb6cb7e2c9ff1a8cc0f1..0000000000000000000000000000000000000000 --- a/drivers/staging/media/easycap/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -easycap-objs := easycap_main.o -easycap-objs += easycap_low.o -easycap-objs += easycap_ioctl.o -easycap-objs += easycap_settings.o -easycap-objs += easycap_testcard.o -easycap-objs += easycap_sound.o -obj-$(CONFIG_EASYCAP) += easycap.o - -ccflags-y := -Wall - diff --git a/drivers/staging/media/easycap/README b/drivers/staging/media/easycap/README deleted file mode 100644 index 796b032384bd5ff6deaa5ae81ad70d05f3433e61..0000000000000000000000000000000000000000 --- a/drivers/staging/media/easycap/README +++ /dev/null @@ -1,141 +0,0 @@ - - *********************************************************** - * EasyCAP USB 2.0 Video Adapter with Audio, Model DC60 * - * and * - * EasyCAP002 4-Channel USB 2.0 DVR * - *********************************************************** - Mike Thomas - - - -SUPPORTED HARDWARE ------------------- - -This driver is intended for use with hardware having USB ID 05e1:0408. -Two kinds of EasyCAP have this USB ID, namely: - - * EasyCAP USB 2.0 Video Adapter with Audio, Model DC60, - having input cables labelled CVBS, S-VIDEO, AUDIO(L), AUDIO(R) - - * EasyCAP002 4-Channel USB 2.0 DVR, having input cables labelled - 1, 2, 3, 4 and an unlabelled input cable for a microphone. - - -BUILD OPTIONS AND DEPENDENCIES ------------------------------- - -Unless EASYCAP_DEBUG is defined during compilation it will not be possible -to select a debug level at the time of module installation. - - -KNOWN RUNTIME ISSUES --------------------- - -(1) Intentionally, this driver will not stream material which is unambiguously -identified by the hardware as copy-protected. Normal video output will be -present for about a minute but will then freeze when this situation arises. - -(2) The controls for luminance, contrast, saturation, hue and volume may not -always work properly. - -(3) Reduced-resolution S-Video seems to suffer from moire artefacts. - - -INPUT NUMBERING ---------------- - -For the EasyCAP with S-VIDEO input cable the driver regards a request for -inputs numbered 0 or 1 as referring to CVBS and a request for input -numbered 5 as referring to S-VIDEO. - -For the EasyCAP with four CVBS inputs the driver expects to be asked for -any one of inputs numbered 1,2,3,4. If input 0 is asked for, it is -interpreted as input 1. - - -MODULE PARAMETERS ------------------ - -Three module parameters are defined: - -debug the easycap module is configured at diagnostic level n (0 to 9) -gain audio gain level n (0 to 31, default is 16) -bars whether to display testcard bars when incoming video signal is lost - 0 => no, 1 => yes (default) - - -SUPPORTED TV STANDARDS AND RESOLUTIONS --------------------------------------- - -The following TV standards are natively supported by the hardware and are -usable as (for example) the "norm=" parameter in the mplayer command: - - PAL_BGHIN, NTSC_N_443, - PAL_Nc, NTSC_N, - SECAM, NTSC_M, NTSC_M_JP, - PAL_60, NTSC_443, - PAL_M. - -In addition, the driver offers "custom" pseudo-standards with a framerate -which is 20% of the usual framerate. These pseudo-standards are named: - - PAL_BGHIN_SLOW, NTSC_N_443_SLOW, - PAL_Nc_SLOW, NTSC_N_SLOW, - SECAM_SLOW, NTSC_M_SLOW, NTSC_M_JP_SLOW, - PAL_60_SLOW, NTSC_443_SLOW, - PAL_M_SLOW. - - -The available picture sizes are: - - at 25 frames per second: 720x576, 704x576, 640x480, 360x288, 320x240; - at 30 frames per second: 720x480, 640x480, 360x240, 320x240. - - -WHAT'S TESTED AND WHAT'S NOT ----------------------------- - -This driver is known to work with mplayer, mencoder, tvtime, zoneminder, -xawtv, gstreamer and sufficiently recent versions of vlc. An interface -to ffmpeg is implemented, but serious audio-video synchronization problems -remain. - -The driver is designed to support all the TV standards accepted by the -hardware, but as yet it has actually been tested on only a few of these. - -I have been unable to test and calibrate the S-video input myself because I -do not possess any equipment with S-video output. - - -UDEV RULES ----------- - -In order that the special files /dev/easycap0 and /dev/easysnd1 are created -with conveniently relaxed permissions when the EasyCAP is plugged in, a file -is preferably to be provided in directory /etc/udev/rules.d with content: - -ACTION!="add|change", GOTO="easycap_rules_end" -ATTRS{idVendor}=="05e1", ATTRS{idProduct}=="0408", \ - MODE="0666", OWNER="root", GROUP="root" -LABEL="easycap_rules_end" - - -MODPROBE CONFIGURATION ----------------------- - -The easycap module is in competition with the module snd-usb-audio for the -EasyCAP's audio channel, and its installation can be aided by providing a -file in directory /etc/modprobe.d with content: - -options easycap gain=16 bars=1 -install easycap /sbin/rmmod snd-usb-audio; /sbin/modprobe --ignore-install easycap - - -ACKNOWLEGEMENTS AND REFERENCES ------------------------------- -This driver makes use of information contained in the Syntek Semicon DC-1125 -Driver, presently maintained at http://sourceforge.net/projects/syntekdriver/ -by Nicolas Vivien. Particularly useful has been a patch to the latter driver -provided by Ivor Hewitt in January 2009. The NTSC implementation is taken -from the work of Ben Trask. - diff --git a/drivers/staging/media/easycap/easycap.h b/drivers/staging/media/easycap/easycap.h deleted file mode 100644 index a007e7442be87d9a2d3b9bcff31726aae17b109f..0000000000000000000000000000000000000000 --- a/drivers/staging/media/easycap/easycap.h +++ /dev/null @@ -1,567 +0,0 @@ -/***************************************************************************** -* * -* easycap.h * -* * -*****************************************************************************/ -/* - * - * Copyright (C) 2010 R.M. Thomas - * - * - * This is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The software is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this software; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* - * THE FOLLOWING PARAMETERS ARE UNDEFINED: - * - * EASYCAP_DEBUG - * - * IF REQUIRED THEY MUST BE EXTERNALLY DEFINED, FOR EXAMPLE AS COMPILER - * OPTIONS. - */ -/*---------------------------------------------------------------------------*/ - -#ifndef __EASYCAP_H__ -#define __EASYCAP_H__ - -/*---------------------------------------------------------------------------*/ -/* - * THESE ARE NORMALLY DEFINED - */ -/*---------------------------------------------------------------------------*/ -#define PATIENCE 500 -#define PERSEVERE -/*---------------------------------------------------------------------------*/ -/* - * THESE ARE FOR MAINTENANCE ONLY - NORMALLY UNDEFINED: - */ -/*---------------------------------------------------------------------------*/ -#undef EASYCAP_TESTCARD -/*---------------------------------------------------------------------------*/ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/*---------------------------------------------------------------------------*/ -/* VENDOR, PRODUCT: Syntek Semiconductor Co., Ltd - * - * EITHER EasyCAP USB 2.0 Video Adapter with Audio, Model No. DC60 - * with input cabling: AUDIO(L), AUDIO(R), CVBS, S-VIDEO. - * - * OR EasyCAP 4CHANNEL USB 2.0 DVR, Model No. EasyCAP002 - * with input cabling: MICROPHONE, CVBS1, CVBS2, CVBS3, CVBS4. - */ -/*---------------------------------------------------------------------------*/ -#define USB_EASYCAP_VENDOR_ID 0x05e1 -#define USB_EASYCAP_PRODUCT_ID 0x0408 - -#define EASYCAP_DRIVER_VERSION "0.9.01" -#define EASYCAP_DRIVER_DESCRIPTION "easycapdc60" - -#define DONGLE_MANY 8 -#define INPUT_MANY 6 -/*---------------------------------------------------------------------------*/ -/* - * DEFAULT LUMINANCE, CONTRAST, SATURATION AND HUE - */ -/*---------------------------------------------------------------------------*/ -#define SAA_0A_DEFAULT 0x7F -#define SAA_0B_DEFAULT 0x3F -#define SAA_0C_DEFAULT 0x2F -#define SAA_0D_DEFAULT 0x00 -/*---------------------------------------------------------------------------*/ -/* - * VIDEO STREAMING PARAMETERS: - * USB 2.0 PROVIDES FOR HIGH-BANDWIDTH ENDPOINTS WITH AN UPPER LIMIT - * OF 3072 BYTES PER MICROFRAME for wMaxPacketSize. - */ -/*---------------------------------------------------------------------------*/ -#define VIDEO_ISOC_BUFFER_MANY 16 -#define VIDEO_ISOC_ORDER 3 -#define VIDEO_ISOC_FRAMESPERDESC ((unsigned int) 1 << VIDEO_ISOC_ORDER) -#define USB_2_0_MAXPACKETSIZE 3072 -#if (USB_2_0_MAXPACKETSIZE > PAGE_SIZE) -#error video_isoc_buffer[.] will not be big enough -#endif -#define VIDEO_JUNK_TOLERATE VIDEO_ISOC_BUFFER_MANY -#define VIDEO_LOST_TOLERATE 50 -/*---------------------------------------------------------------------------*/ -/* - * VIDEO BUFFERS - */ -/*---------------------------------------------------------------------------*/ -#define FIELD_BUFFER_SIZE (203 * PAGE_SIZE) -#define FRAME_BUFFER_SIZE (405 * PAGE_SIZE) -#define FIELD_BUFFER_MANY 4 -#define FRAME_BUFFER_MANY 6 -/*---------------------------------------------------------------------------*/ -/* - * AUDIO STREAMING PARAMETERS - */ -/*---------------------------------------------------------------------------*/ -#define AUDIO_ISOC_BUFFER_MANY 16 -#define AUDIO_ISOC_ORDER 1 -#define AUDIO_ISOC_FRAMESPERDESC 32 -#define AUDIO_ISOC_BUFFER_SIZE (PAGE_SIZE << AUDIO_ISOC_ORDER) -/*---------------------------------------------------------------------------*/ -/* - * AUDIO BUFFERS - */ -/*---------------------------------------------------------------------------*/ -#define AUDIO_FRAGMENT_MANY 32 -#define PAGES_PER_AUDIO_FRAGMENT 4 -/*---------------------------------------------------------------------------*/ -/* - * IT IS ESSENTIAL THAT EVEN-NUMBERED STANDARDS ARE 25 FRAMES PER SECOND, - * ODD-NUMBERED STANDARDS ARE 30 FRAMES PER SECOND. - * THE NUMBERING OF STANDARDS MUST NOT BE CHANGED WITHOUT DUE CARE. NOT - * ONLY MUST THE PARAMETER - * STANDARD_MANY - * BE CHANGED TO CORRESPOND TO THE NEW NUMBER OF STANDARDS, BUT ALSO THE - * NUMBERING MUST REMAIN AN UNBROKEN ASCENDING SEQUENCE: DUMMY STANDARDS - * MAY NEED TO BE ADDED. APPROPRIATE CHANGES WILL ALWAYS BE REQUIRED IN - * ROUTINE fillin_formats() AND POSSIBLY ELSEWHERE. BEWARE. - */ -/*---------------------------------------------------------------------------*/ -#define PAL_BGHIN 0 -#define PAL_Nc 2 -#define SECAM 4 -#define NTSC_N 6 -#define NTSC_N_443 8 -#define NTSC_M 1 -#define NTSC_443 3 -#define NTSC_M_JP 5 -#define PAL_60 7 -#define PAL_M 9 -#define PAL_BGHIN_SLOW 10 -#define PAL_Nc_SLOW 12 -#define SECAM_SLOW 14 -#define NTSC_N_SLOW 16 -#define NTSC_N_443_SLOW 18 -#define NTSC_M_SLOW 11 -#define NTSC_443_SLOW 13 -#define NTSC_M_JP_SLOW 15 -#define PAL_60_SLOW 17 -#define PAL_M_SLOW 19 -#define STANDARD_MANY 20 -/*---------------------------------------------------------------------------*/ -/* - * ENUMS - */ -/*---------------------------------------------------------------------------*/ -enum { - AT_720x576, - AT_704x576, - AT_640x480, - AT_720x480, - AT_360x288, - AT_320x240, - AT_360x240, - RESOLUTION_MANY -}; -enum { - FMT_UYVY, - FMT_YUY2, - FMT_RGB24, - FMT_RGB32, - FMT_BGR24, - FMT_BGR32, - PIXELFORMAT_MANY -}; -enum { - FIELD_NONE, - FIELD_INTERLACED, - INTERLACE_MANY -}; -#define SETTINGS_MANY (STANDARD_MANY * \ - RESOLUTION_MANY * \ - 2 * \ - PIXELFORMAT_MANY * \ - INTERLACE_MANY) -/*---------------------------------------------------------------------------*/ -/* - * STRUCTURE DEFINITIONS - */ -/*---------------------------------------------------------------------------*/ -struct easycap_dongle { - struct easycap *peasycap; - struct mutex mutex_video; - struct mutex mutex_audio; -}; -/*---------------------------------------------------------------------------*/ -struct data_buffer { - struct list_head list_head; - void *pgo; - void *pto; - u16 kount; - u16 input; -}; -/*---------------------------------------------------------------------------*/ -struct data_urb { - struct list_head list_head; - struct urb *purb; - int isbuf; - int length; -}; -/*---------------------------------------------------------------------------*/ -struct easycap_standard { - u16 mask; -struct v4l2_standard v4l2_standard; -}; -struct easycap_format { - u16 mask; - char name[128]; -struct v4l2_format v4l2_format; -}; -struct inputset { - int input; - int input_ok; - int standard_offset; - int standard_offset_ok; - int format_offset; - int format_offset_ok; - int brightness; - int brightness_ok; - int contrast; - int contrast_ok; - int saturation; - int saturation_ok; - int hue; - int hue_ok; -}; -/*---------------------------------------------------------------------------*/ -/* - * easycap.ilk == 0 => CVBS+S-VIDEO HARDWARE, AUDIO wMaxPacketSize=256 - * easycap.ilk == 2 => CVBS+S-VIDEO HARDWARE, AUDIO wMaxPacketSize=9 - * easycap.ilk == 3 => FOUR-CVBS HARDWARE, AUDIO wMaxPacketSize=9 - */ -/*---------------------------------------------------------------------------*/ -struct easycap { - int isdongle; - int minor; - - struct video_device video_device; - struct v4l2_device v4l2_device; - - int status; - unsigned int audio_pages_per_fragment; - unsigned int audio_bytes_per_fragment; - unsigned int audio_buffer_page_many; - -#define UPSAMPLE -#ifdef UPSAMPLE - s16 oldaudio; -#endif /*UPSAMPLE*/ - - int ilk; - bool microphone; - - struct usb_device *pusb_device; - struct usb_interface *pusb_interface; - - struct kref kref; - - int queued[FRAME_BUFFER_MANY]; - int done[FRAME_BUFFER_MANY]; - - wait_queue_head_t wq_video; - wait_queue_head_t wq_audio; - wait_queue_head_t wq_trigger; - - int input; - int polled; - int standard_offset; - int format_offset; - struct inputset inputset[INPUT_MANY]; - - bool ntsc; - int fps; - int usec; - int tolerate; - int skip; - int skipped; - int lost[INPUT_MANY]; - int merit[180]; - - int video_interface; - int video_altsetting_on; - int video_altsetting_off; - int video_endpointnumber; - int video_isoc_maxframesize; - int video_isoc_buffer_size; - int video_isoc_framesperdesc; - - int video_isoc_streaming; - int video_isoc_sequence; - int video_idle; - int video_eof; - int video_junk; - - struct data_buffer video_isoc_buffer[VIDEO_ISOC_BUFFER_MANY]; - struct data_buffer field_buffer[FIELD_BUFFER_MANY] - [(FIELD_BUFFER_SIZE/PAGE_SIZE)]; - struct data_buffer frame_buffer[FRAME_BUFFER_MANY] - [(FRAME_BUFFER_SIZE/PAGE_SIZE)]; - - struct list_head urb_video_head; - struct list_head *purb_video_head; - - u8 cache[8]; - u8 *pcache; - int video_mt; - int audio_mt; - u32 isequence; - - int vma_many; -/*---------------------------------------------------------------------------*/ -/* - * BUFFER INDICATORS - */ -/*---------------------------------------------------------------------------*/ - int field_fill; /* Field buffer being filled by easycap_complete(). */ - /* Bumped only by easycap_complete(). */ - int field_page; /* Page of field buffer page being filled by */ - /* easycap_complete(). */ - int field_read; /* Field buffer to be read by field2frame(). */ - /* Bumped only by easycap_complete(). */ - int frame_fill; /* Frame buffer being filled by field2frame(). */ - /* Bumped only by easycap_dqbuf() when */ - /* field2frame() has created a complete frame. */ - int frame_read; /* Frame buffer offered to user by DQBUF. */ - /* Set only by easycap_dqbuf() to trail frame_fill.*/ - int frame_lock; /* Flag set to 1 by DQBUF and cleared by QBUF */ -/*---------------------------------------------------------------------------*/ -/* - * IMAGE PROPERTIES - */ -/*---------------------------------------------------------------------------*/ - u32 pixelformat; - int width; - int height; - int bytesperpixel; - bool byteswaporder; - bool decimatepixel; - bool offerfields; - int frame_buffer_used; - int frame_buffer_many; - int videofieldamount; - - int brightness; - int contrast; - int saturation; - int hue; - - int allocation_video_urb; - int allocation_video_page; - int allocation_video_struct; - int registered_video; -/*---------------------------------------------------------------------------*/ -/* - * ALSA - */ -/*---------------------------------------------------------------------------*/ - struct snd_pcm_hardware alsa_hardware; - struct snd_card *psnd_card; - struct snd_pcm *psnd_pcm; - struct snd_pcm_substream *psubstream; - int dma_fill; - int dma_next; - int dma_read; -/*---------------------------------------------------------------------------*/ -/* - * SOUND PROPERTIES - */ -/*---------------------------------------------------------------------------*/ - int audio_interface; - int audio_altsetting_on; - int audio_altsetting_off; - int audio_endpointnumber; - int audio_isoc_maxframesize; - int audio_isoc_buffer_size; - int audio_isoc_framesperdesc; - - int audio_isoc_streaming; - int audio_idle; - int audio_eof; - int volume; - int mute; - s8 gain; - - struct data_buffer audio_isoc_buffer[AUDIO_ISOC_BUFFER_MANY]; - - struct list_head urb_audio_head; - struct list_head *purb_audio_head; -/*---------------------------------------------------------------------------*/ -/* - * BUFFER INDICATORS - */ -/*---------------------------------------------------------------------------*/ - int audio_fill; /* Audio buffer being filled by easycap_complete(). */ - /* Bumped only by easycap_complete(). */ - int audio_read; /* Audio buffer page being read by easycap_read(). */ - /* Set by easycap_read() to trail audio_fill by */ - /* one fragment. */ -/*---------------------------------------------------------------------------*/ -/* - * SOUND PROPERTIES - */ -/*---------------------------------------------------------------------------*/ - int allocation_audio_urb; - int allocation_audio_page; - int allocation_audio_struct; - int registered_audio; - - long long int audio_sample; - long long int audio_niveau; - long long int audio_square; - - struct data_buffer audio_buffer[]; -}; -/*---------------------------------------------------------------------------*/ -/* - * VIDEO FUNCTION PROTOTYPES - */ -/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ -int easycap_newinput(struct easycap *, int); -void easycap_testcard(struct easycap *, int); -int easycap_isdongle(struct easycap *); - -long easycap_unlocked_ioctl(struct file *, unsigned int, unsigned long); - -int easycap_video_dqbuf(struct easycap *, int); -int easycap_video_submit_urbs(struct easycap *); -int easycap_video_kill_urbs(struct easycap *); -int easycap_video_fillin_formats(void); - -int adjust_standard(struct easycap *, v4l2_std_id); -int adjust_format(struct easycap *, u32, u32, u32, int, bool); -int adjust_brightness(struct easycap *, int); -int adjust_contrast(struct easycap *, int); -int adjust_saturation(struct easycap *, int); -int adjust_hue(struct easycap *, int); -/*---------------------------------------------------------------------------*/ -/* - * AUDIO FUNCTION PROTOTYPES - */ -/*---------------------------------------------------------------------------*/ -int easycap_alsa_probe(struct easycap *); -int easycap_audio_kill_urbs(struct easycap *); -void easycap_alsa_complete(struct urb *); -/*---------------------------------------------------------------------------*/ -/* - * LOW-LEVEL FUNCTION PROTOTYPES - */ -/*---------------------------------------------------------------------------*/ -int easycap_audio_gainset(struct usb_device *, s8); -int easycap_audio_setup(struct easycap *); - -int easycap_wakeup_device(struct usb_device *); - -int setup_stk(struct usb_device *, bool); -int setup_saa(struct usb_device *, bool); -int ready_saa(struct usb_device *); -int merit_saa(struct usb_device *); -int check_vt(struct usb_device *); -int select_input(struct usb_device *, int, int); -int set_resolution(struct usb_device *, u16, u16, u16, u16); - -int read_saa(struct usb_device *, u16); -int write_saa(struct usb_device *, u16, u16); -int start_100(struct usb_device *); -int stop_100(struct usb_device *); -/*---------------------------------------------------------------------------*/ - - -/*---------------------------------------------------------------------------*/ -/* - * MACROS SAM(...) AND JOM(...) ALLOW DIAGNOSTIC OUTPUT TO BE TAGGED WITH - * THE IDENTITY OF THE DONGLE TO WHICH IT APPLIES, BUT IF INVOKED WHEN THE - * POINTER peasycap IS INVALID AN Oops IS LIKELY, AND ITS CAUSE MAY NOT BE - * IMMEDIATELY OBVIOUS FROM A CASUAL READING OF THE SOURCE CODE. BEWARE. -*/ -/*---------------------------------------------------------------------------*/ -const char *strerror(int err); - -#define SAY(format, args...) do { \ - printk(KERN_DEBUG "easycap:: %s: " \ - format, __func__, ##args); \ -} while (0) -#define SAM(format, args...) do { \ - printk(KERN_DEBUG "easycap::%i%s: " \ - format, peasycap->isdongle, __func__, ##args);\ -} while (0) - -#ifdef CONFIG_EASYCAP_DEBUG -extern int easycap_debug; -#define JOT(n, format, args...) do { \ - if (n <= easycap_debug) { \ - printk(KERN_DEBUG "easycap:: %s: " \ - format, __func__, ##args);\ - } \ -} while (0) -#define JOM(n, format, args...) do { \ - if (n <= easycap_debug) { \ - printk(KERN_DEBUG "easycap::%i%s: " \ - format, peasycap->isdongle, __func__, ##args);\ - } \ -} while (0) - -#else -#define JOT(n, format, args...) do {} while (0) -#define JOM(n, format, args...) do {} while (0) -#endif /* CONFIG_EASYCAP_DEBUG */ - -/*---------------------------------------------------------------------------*/ - -/*---------------------------------------------------------------------------*/ -/* globals - */ -/*---------------------------------------------------------------------------*/ - -extern bool easycap_readback; -extern const struct easycap_standard easycap_standard[]; -extern struct easycap_format easycap_format[]; -extern struct v4l2_queryctrl easycap_control[]; -extern struct easycap_dongle easycapdc60_dongle[]; - -#endif /* !__EASYCAP_H__ */ diff --git a/drivers/staging/media/easycap/easycap_ioctl.c b/drivers/staging/media/easycap/easycap_ioctl.c deleted file mode 100644 index 3cee3cd986d298c43f537785f5a267e87fd6d39f..0000000000000000000000000000000000000000 --- a/drivers/staging/media/easycap/easycap_ioctl.c +++ /dev/null @@ -1,2443 +0,0 @@ -/****************************************************************************** -* * -* easycap_ioctl.c * -* * -******************************************************************************/ -/* - * - * Copyright (C) 2010 R.M. Thomas - * - * - * This is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The software is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this software; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ -/*****************************************************************************/ - -#include "easycap.h" -#include - -/*--------------------------------------------------------------------------*/ -/* - * UNLESS THERE IS A PREMATURE ERROR RETURN THIS ROUTINE UPDATES THE - * FOLLOWING: - * peasycap->standard_offset - * peasycap->inputset[peasycap->input].standard_offset - * peasycap->fps - * peasycap->usec - * peasycap->tolerate - * peasycap->skip - */ -/*---------------------------------------------------------------------------*/ -int adjust_standard(struct easycap *peasycap, v4l2_std_id std_id) -{ - struct easycap_standard const *peasycap_standard; - u16 reg, set; - int ir, rc, need, k; - unsigned int itwas, isnow; - bool resubmit; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - peasycap_standard = &easycap_standard[0]; - while (0xFFFF != peasycap_standard->mask) { - if (std_id == peasycap_standard->v4l2_standard.id) - break; - peasycap_standard++; - } - if (0xFFFF == peasycap_standard->mask) { - peasycap_standard = &easycap_standard[0]; - while (0xFFFF != peasycap_standard->mask) { - if (std_id & peasycap_standard->v4l2_standard.id) - break; - peasycap_standard++; - } - } - if (0xFFFF == peasycap_standard->mask) { - SAM("ERROR: 0x%08X=std_id: standard not found\n", - (unsigned int)std_id); - return -EINVAL; - } - SAM("selected standard: %s\n", - &(peasycap_standard->v4l2_standard.name[0])); - if (peasycap->standard_offset == peasycap_standard - easycap_standard) { - SAM("requested standard already in effect\n"); - return 0; - } - peasycap->standard_offset = peasycap_standard - easycap_standard; - for (k = 0; k < INPUT_MANY; k++) { - if (!peasycap->inputset[k].standard_offset_ok) { - peasycap->inputset[k].standard_offset = - peasycap->standard_offset; - } - } - if ((0 <= peasycap->input) && (INPUT_MANY > peasycap->input)) { - peasycap->inputset[peasycap->input].standard_offset = - peasycap->standard_offset; - peasycap->inputset[peasycap->input].standard_offset_ok = 1; - } else - JOM(8, "%i=peasycap->input\n", peasycap->input); - - peasycap->fps = peasycap_standard->v4l2_standard.frameperiod.denominator / - peasycap_standard->v4l2_standard.frameperiod.numerator; - switch (peasycap->fps) { - case 6: - case 30: { - peasycap->ntsc = true; - break; - } - case 5: - case 25: { - peasycap->ntsc = false; - break; - } - default: { - SAM("MISTAKE: %i=frames-per-second\n", peasycap->fps); - return -ENOENT; - } - } - JOM(8, "%i frames-per-second\n", peasycap->fps); - if (0x8000 & peasycap_standard->mask) { - peasycap->skip = 5; - peasycap->usec = 1000000 / (2 * (5 * peasycap->fps)); - peasycap->tolerate = 1000 * (25 / (5 * peasycap->fps)); - } else { - peasycap->skip = 0; - peasycap->usec = 1000000 / (2 * peasycap->fps); - peasycap->tolerate = 1000 * (25 / peasycap->fps); - } - if (peasycap->video_isoc_streaming) { - resubmit = true; - easycap_video_kill_urbs(peasycap); - } else - resubmit = false; -/*--------------------------------------------------------------------------*/ -/* - * SAA7113H DATASHEET PAGE 44, TABLE 42 - */ -/*--------------------------------------------------------------------------*/ - need = 0; - itwas = 0; - reg = 0x00; - set = 0x00; - switch (peasycap_standard->mask & 0x000F) { - case NTSC_M_JP: { - reg = 0x0A; - set = 0x95; - ir = read_saa(peasycap->pusb_device, reg); - if (0 > ir) - SAM("ERROR: cannot read SAA register 0x%02X\n", reg); - else - itwas = (unsigned int)ir; - rc = write_saa(peasycap->pusb_device, reg, set); - if (rc) - SAM("ERROR: failed to set SAA register " - "0x%02X to 0x%02X for JP standard\n", reg, set); - else { - isnow = (unsigned int)read_saa(peasycap->pusb_device, reg); - if (0 > ir) - JOM(8, "SAA register 0x%02X changed " - "to 0x%02X\n", reg, isnow); - else - JOM(8, "SAA register 0x%02X changed " - "from 0x%02X to 0x%02X\n", reg, itwas, isnow); - } - - reg = 0x0B; - set = 0x48; - ir = read_saa(peasycap->pusb_device, reg); - if (0 > ir) - SAM("ERROR: cannot read SAA register 0x%02X\n", reg); - else - itwas = (unsigned int)ir; - rc = write_saa(peasycap->pusb_device, reg, set); - if (rc) - SAM("ERROR: failed to set SAA register 0x%02X to 0x%02X " - "for JP standard\n", reg, set); - else { - isnow = (unsigned int)read_saa(peasycap->pusb_device, reg); - if (0 > ir) - JOM(8, "SAA register 0x%02X changed " - "to 0x%02X\n", reg, isnow); - else - JOM(8, "SAA register 0x%02X changed " - "from 0x%02X to 0x%02X\n", reg, itwas, isnow); - } -/*--------------------------------------------------------------------------*/ -/* - * NOTE: NO break HERE: RUN ON TO NEXT CASE - */ -/*--------------------------------------------------------------------------*/ - } - case NTSC_M: - case PAL_BGHIN: { - reg = 0x0E; - set = 0x01; - need = 1; - break; - } - case NTSC_N_443: - case PAL_60: { - reg = 0x0E; - set = 0x11; - need = 1; - break; - } - case NTSC_443: - case PAL_Nc: { - reg = 0x0E; - set = 0x21; - need = 1; - break; - } - case NTSC_N: - case PAL_M: { - reg = 0x0E; - set = 0x31; - need = 1; - break; - } - case SECAM: { - reg = 0x0E; - set = 0x51; - need = 1; - break; - } - default: - break; - } -/*--------------------------------------------------------------------------*/ - if (need) { - ir = read_saa(peasycap->pusb_device, reg); - if (0 > ir) - SAM("ERROR: failed to read SAA register 0x%02X\n", reg); - else - itwas = (unsigned int)ir; - rc = write_saa(peasycap->pusb_device, reg, set); - if (0 != write_saa(peasycap->pusb_device, reg, set)) { - SAM("ERROR: failed to set SAA register " - "0x%02X to 0x%02X for table 42\n", reg, set); - } else { - isnow = (unsigned int)read_saa(peasycap->pusb_device, reg); - if (0 > ir) - JOM(8, "SAA register 0x%02X changed " - "to 0x%02X\n", reg, isnow); - else - JOM(8, "SAA register 0x%02X changed " - "from 0x%02X to 0x%02X\n", reg, itwas, isnow); - } - } -/*--------------------------------------------------------------------------*/ -/* - * SAA7113H DATASHEET PAGE 41 - */ -/*--------------------------------------------------------------------------*/ - reg = 0x08; - ir = read_saa(peasycap->pusb_device, reg); - if (0 > ir) - SAM("ERROR: failed to read SAA register 0x%02X " - "so cannot reset\n", reg); - else { - itwas = (unsigned int)ir; - if (peasycap_standard->mask & 0x0001) - set = itwas | 0x40 ; - else - set = itwas & ~0x40 ; - rc = write_saa(peasycap->pusb_device, reg, set); - if (rc) - SAM("ERROR: failed to set SAA register 0x%02X to 0x%02X\n", - reg, set); - else { - isnow = (unsigned int)read_saa(peasycap->pusb_device, reg); - if (0 > ir) - JOM(8, "SAA register 0x%02X changed to 0x%02X\n", - reg, isnow); - else - JOM(8, "SAA register 0x%02X changed " - "from 0x%02X to 0x%02X\n", reg, itwas, isnow); - } - } -/*--------------------------------------------------------------------------*/ -/* - * SAA7113H DATASHEET PAGE 51, TABLE 57 - */ -/*---------------------------------------------------------------------------*/ - reg = 0x40; - ir = read_saa(peasycap->pusb_device, reg); - if (0 > ir) - SAM("ERROR: failed to read SAA register 0x%02X " - "so cannot reset\n", reg); - else { - itwas = (unsigned int)ir; - if (peasycap_standard->mask & 0x0001) - set = itwas | 0x80 ; - else - set = itwas & ~0x80 ; - rc = write_saa(peasycap->pusb_device, reg, set); - if (rc) - SAM("ERROR: failed to set SAA register 0x%02X to 0x%02X\n", - reg, set); - else { - isnow = (unsigned int)read_saa(peasycap->pusb_device, reg); - if (0 > ir) - JOM(8, "SAA register 0x%02X changed to 0x%02X\n", - reg, isnow); - else - JOM(8, "SAA register 0x%02X changed " - "from 0x%02X to 0x%02X\n", reg, itwas, isnow); - } - } -/*--------------------------------------------------------------------------*/ -/* - * SAA7113H DATASHEET PAGE 53, TABLE 66 - */ -/*--------------------------------------------------------------------------*/ - reg = 0x5A; - ir = read_saa(peasycap->pusb_device, reg); - if (0 > ir) - SAM("ERROR: failed to read SAA register 0x%02X but continuing\n", reg); - itwas = (unsigned int)ir; - if (peasycap_standard->mask & 0x0001) - set = 0x0A ; - else - set = 0x07 ; - if (0 != write_saa(peasycap->pusb_device, reg, set)) - SAM("ERROR: failed to set SAA register 0x%02X to 0x%02X\n", - reg, set); - else { - isnow = (unsigned int)read_saa(peasycap->pusb_device, reg); - if (0 > ir) - JOM(8, "SAA register 0x%02X changed " - "to 0x%02X\n", reg, isnow); - else - JOM(8, "SAA register 0x%02X changed " - "from 0x%02X to 0x%02X\n", reg, itwas, isnow); - } - if (resubmit) - easycap_video_submit_urbs(peasycap); - return 0; -} -/*****************************************************************************/ -/*--------------------------------------------------------------------------*/ -/* - * THE ALGORITHM FOR RESPONDING TO THE VIDIO_S_FMT IOCTL REQUIRES - * A VALID VALUE OF peasycap->standard_offset, OTHERWISE -EBUSY IS RETURNED. - * - * PROVIDED THE ARGUMENT try IS false AND THERE IS NO PREMATURE ERROR RETURN - * THIS ROUTINE UPDATES THE FOLLOWING: - * peasycap->format_offset - * peasycap->inputset[peasycap->input].format_offset - * peasycap->pixelformat - * peasycap->height - * peasycap->width - * peasycap->bytesperpixel - * peasycap->byteswaporder - * peasycap->decimatepixel - * peasycap->frame_buffer_used - * peasycap->videofieldamount - * peasycap->offerfields - * - * IF SUCCESSFUL THE FUNCTION RETURNS THE OFFSET IN easycap_format[] - * IDENTIFYING THE FORMAT WHICH IS TO RETURNED TO THE USER. - * ERRORS RETURN A NEGATIVE NUMBER. - */ -/*--------------------------------------------------------------------------*/ -int adjust_format(struct easycap *peasycap, - u32 width, u32 height, u32 pixelformat, int field, bool try) -{ - struct easycap_format *peasycap_format, *peasycap_best_format; - u16 mask; - struct usb_device *p; - int miss, multiplier, best, k; - char bf[5], fo[32], *pc; - u32 uc; - bool resubmit; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (0 > peasycap->standard_offset) { - JOM(8, "%i=peasycap->standard_offset\n", peasycap->standard_offset); - return -EBUSY; - } - p = peasycap->pusb_device; - if (!p) { - SAM("ERROR: peaycap->pusb_device is NULL\n"); - return -EFAULT; - } - pc = &bf[0]; - uc = pixelformat; - memcpy((void *)pc, (void *)(&uc), 4); - bf[4] = 0; - mask = 0xFF & easycap_standard[peasycap->standard_offset].mask; - SAM("sought: %ix%i,%s(0x%08X),%i=field,0x%02X=std mask\n", - width, height, pc, pixelformat, field, mask); - switch (field) { - case V4L2_FIELD_ANY: { - strcpy(&fo[0], "V4L2_FIELD_ANY "); - break; - } - case V4L2_FIELD_NONE: { - strcpy(&fo[0], "V4L2_FIELD_NONE"); - break; - } - case V4L2_FIELD_TOP: { - strcpy(&fo[0], "V4L2_FIELD_TOP"); - break; - } - case V4L2_FIELD_BOTTOM: { - strcpy(&fo[0], "V4L2_FIELD_BOTTOM"); - break; - } - case V4L2_FIELD_INTERLACED: { - strcpy(&fo[0], "V4L2_FIELD_INTERLACED"); - break; - } - case V4L2_FIELD_SEQ_TB: { - strcpy(&fo[0], "V4L2_FIELD_SEQ_TB"); - break; - } - case V4L2_FIELD_SEQ_BT: { - strcpy(&fo[0], "V4L2_FIELD_SEQ_BT"); - break; - } - case V4L2_FIELD_ALTERNATE: { - strcpy(&fo[0], "V4L2_FIELD_ALTERNATE"); - break; - } - case V4L2_FIELD_INTERLACED_TB: { - strcpy(&fo[0], "V4L2_FIELD_INTERLACED_TB"); - break; - } - case V4L2_FIELD_INTERLACED_BT: { - strcpy(&fo[0], "V4L2_FIELD_INTERLACED_BT"); - break; - } - default: { - strcpy(&fo[0], "V4L2_FIELD_... UNKNOWN "); - break; - } - } - SAM("sought: %s\n", &fo[0]); - if (V4L2_FIELD_ANY == field) { - field = V4L2_FIELD_NONE; - SAM("prefer: V4L2_FIELD_NONE=field, was V4L2_FIELD_ANY\n"); - } - peasycap_best_format = NULL; - peasycap_format = &easycap_format[0]; - while (0 != peasycap_format->v4l2_format.fmt.pix.width) { - JOM(16, ".> %i %i 0x%08X %ix%i\n", - peasycap_format->mask & 0x01, - peasycap_format->v4l2_format.fmt.pix.field, - peasycap_format->v4l2_format.fmt.pix.pixelformat, - peasycap_format->v4l2_format.fmt.pix.width, - peasycap_format->v4l2_format.fmt.pix.height); - - if (((peasycap_format->mask & 0x1F) == (mask & 0x1F)) && - (peasycap_format->v4l2_format.fmt.pix.field == field) && - (peasycap_format->v4l2_format.fmt.pix.pixelformat == pixelformat) && - (peasycap_format->v4l2_format.fmt.pix.width == width) && - (peasycap_format->v4l2_format.fmt.pix.height == height)) { - - peasycap_best_format = peasycap_format; - break; - } - peasycap_format++; - } - if (0 == peasycap_format->v4l2_format.fmt.pix.width) { - SAM("cannot do: %ix%i with standard mask 0x%02X\n", - width, height, mask); - peasycap_format = &easycap_format[0]; - best = -1; - while (0 != peasycap_format->v4l2_format.fmt.pix.width) { - if (((peasycap_format->mask & 0x1F) == (mask & 0x1F)) && - (peasycap_format->v4l2_format.fmt.pix.field == field) && - (peasycap_format->v4l2_format.fmt.pix.pixelformat == pixelformat)) { - - miss = abs(peasycap_format->v4l2_format.fmt.pix.width - width); - if ((best > miss) || (best < 0)) { - best = miss; - peasycap_best_format = peasycap_format; - if (!miss) - break; - } - } - peasycap_format++; - } - if (-1 == best) { - SAM("cannot do %ix... with standard mask 0x%02X\n", - width, mask); - SAM("cannot do ...x%i with standard mask 0x%02X\n", - height, mask); - SAM(" %ix%i unmatched\n", width, height); - return peasycap->format_offset; - } - } - if (!peasycap_best_format) { - SAM("MISTAKE: peasycap_best_format is NULL"); - return -EINVAL; - } - peasycap_format = peasycap_best_format; - -/*...........................................................................*/ - if (try) - return peasycap_best_format - easycap_format; -/*...........................................................................*/ - - if (false != try) { - SAM("MISTAKE: true==try where is should be false\n"); - return -EINVAL; - } - SAM("actioning: %ix%i %s\n", - peasycap_format->v4l2_format.fmt.pix.width, - peasycap_format->v4l2_format.fmt.pix.height, - &peasycap_format->name[0]); - peasycap->height = peasycap_format->v4l2_format.fmt.pix.height; - peasycap->width = peasycap_format->v4l2_format.fmt.pix.width; - peasycap->pixelformat = peasycap_format->v4l2_format.fmt.pix.pixelformat; - peasycap->format_offset = peasycap_format - easycap_format; - - - for (k = 0; k < INPUT_MANY; k++) { - if (!peasycap->inputset[k].format_offset_ok) { - peasycap->inputset[k].format_offset = - peasycap->format_offset; - } - } - if ((0 <= peasycap->input) && (INPUT_MANY > peasycap->input)) { - peasycap->inputset[peasycap->input].format_offset = - peasycap->format_offset; - peasycap->inputset[peasycap->input].format_offset_ok = 1; - } else - JOM(8, "%i=peasycap->input\n", peasycap->input); - - - - peasycap->bytesperpixel = (0x00E0 & peasycap_format->mask) >> 5 ; - if (0x0100 & peasycap_format->mask) - peasycap->byteswaporder = true; - else - peasycap->byteswaporder = false; - if (0x0200 & peasycap_format->mask) - peasycap->skip = 5; - else - peasycap->skip = 0; - if (0x0800 & peasycap_format->mask) - peasycap->decimatepixel = true; - else - peasycap->decimatepixel = false; - if (0x1000 & peasycap_format->mask) - peasycap->offerfields = true; - else - peasycap->offerfields = false; - if (peasycap->decimatepixel) - multiplier = 2; - else - multiplier = 1; - peasycap->videofieldamount = - multiplier * peasycap->width * multiplier * peasycap->height; - peasycap->frame_buffer_used = - peasycap->bytesperpixel * peasycap->width * peasycap->height; - if (peasycap->video_isoc_streaming) { - resubmit = true; - easycap_video_kill_urbs(peasycap); - } else - resubmit = false; -/*---------------------------------------------------------------------------*/ -/* - * PAL - */ -/*---------------------------------------------------------------------------*/ - if (0 == (0x01 & peasycap_format->mask)) { - if (((720 == peasycap_format->v4l2_format.fmt.pix.width) && - (576 == peasycap_format->v4l2_format.fmt.pix.height)) || - ((360 == peasycap_format->v4l2_format.fmt.pix.width) && - (288 == peasycap_format->v4l2_format.fmt.pix.height))) { - if (set_resolution(p, 0x0000, 0x0001, 0x05A0, 0x0121)) { - SAM("ERROR: set_resolution() failed\n"); - return -EINVAL; - } - } else if ((704 == peasycap_format->v4l2_format.fmt.pix.width) && - (576 == peasycap_format->v4l2_format.fmt.pix.height)) { - if (set_resolution(p, 0x0004, 0x0001, 0x0584, 0x0121)) { - SAM("ERROR: set_resolution() failed\n"); - return -EINVAL; - } - } else if (((640 == peasycap_format->v4l2_format.fmt.pix.width) && - (480 == peasycap_format->v4l2_format.fmt.pix.height)) || - ((320 == peasycap_format->v4l2_format.fmt.pix.width) && - (240 == peasycap_format->v4l2_format.fmt.pix.height))) { - if (set_resolution(p, 0x0014, 0x0020, 0x0514, 0x0110)) { - SAM("ERROR: set_resolution() failed\n"); - return -EINVAL; - } - } else { - SAM("MISTAKE: bad format, cannot set resolution\n"); - return -EINVAL; - } -/*---------------------------------------------------------------------------*/ -/* - * NTSC - */ -/*---------------------------------------------------------------------------*/ - } else { - if (((720 == peasycap_format->v4l2_format.fmt.pix.width) && - (480 == peasycap_format->v4l2_format.fmt.pix.height)) || - ((360 == peasycap_format->v4l2_format.fmt.pix.width) && - (240 == peasycap_format->v4l2_format.fmt.pix.height))) { - if (set_resolution(p, 0x0000, 0x0003, 0x05A0, 0x00F3)) { - SAM("ERROR: set_resolution() failed\n"); - return -EINVAL; - } - } else if (((640 == peasycap_format->v4l2_format.fmt.pix.width) && - (480 == peasycap_format->v4l2_format.fmt.pix.height)) || - ((320 == peasycap_format->v4l2_format.fmt.pix.width) && - (240 == peasycap_format->v4l2_format.fmt.pix.height))) { - if (set_resolution(p, 0x0014, 0x0003, 0x0514, 0x00F3)) { - SAM("ERROR: set_resolution() failed\n"); - return -EINVAL; - } - } else { - SAM("MISTAKE: bad format, cannot set resolution\n"); - return -EINVAL; - } - } -/*---------------------------------------------------------------------------*/ - if (resubmit) - easycap_video_submit_urbs(peasycap); - - return peasycap_best_format - easycap_format; -} -/*****************************************************************************/ -int adjust_brightness(struct easycap *peasycap, int value) -{ - unsigned int mood; - int i1, k; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (V4L2_CID_BRIGHTNESS == easycap_control[i1].id) { - if ((easycap_control[i1].minimum > value) || - (easycap_control[i1].maximum < value)) - value = easycap_control[i1].default_value; - - if ((easycap_control[i1].minimum <= peasycap->brightness) && - (easycap_control[i1].maximum >= peasycap->brightness)) { - if (peasycap->brightness == value) { - SAM("unchanged brightness at 0x%02X\n", - value); - return 0; - } - } - peasycap->brightness = value; - for (k = 0; k < INPUT_MANY; k++) { - if (!peasycap->inputset[k].brightness_ok) - peasycap->inputset[k].brightness = - peasycap->brightness; - } - if ((0 <= peasycap->input) && (INPUT_MANY > peasycap->input)) { - peasycap->inputset[peasycap->input].brightness = - peasycap->brightness; - peasycap->inputset[peasycap->input].brightness_ok = 1; - } else - JOM(8, "%i=peasycap->input\n", peasycap->input); - - mood = 0x00FF & (unsigned int)peasycap->brightness; - if (write_saa(peasycap->pusb_device, 0x0A, mood)) { - SAM("WARNING: failed to adjust brightness " - "to 0x%02X\n", mood); - return -ENOENT; - } - SAM("adjusting brightness to 0x%02X\n", mood); - return 0; - } - i1++; - } - SAM("WARNING: failed to adjust brightness: control not found\n"); - return -ENOENT; -} -/*****************************************************************************/ -int adjust_contrast(struct easycap *peasycap, int value) -{ - unsigned int mood; - int i1, k; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (V4L2_CID_CONTRAST == easycap_control[i1].id) { - if ((easycap_control[i1].minimum > value) || - (easycap_control[i1].maximum < value)) - value = easycap_control[i1].default_value; - - - if ((easycap_control[i1].minimum <= peasycap->contrast) && - (easycap_control[i1].maximum >= peasycap->contrast)) { - if (peasycap->contrast == value) { - SAM("unchanged contrast at 0x%02X\n", value); - return 0; - } - } - peasycap->contrast = value; - for (k = 0; k < INPUT_MANY; k++) { - if (!peasycap->inputset[k].contrast_ok) - peasycap->inputset[k].contrast = peasycap->contrast; - } - - if ((0 <= peasycap->input) && (INPUT_MANY > peasycap->input)) { - peasycap->inputset[peasycap->input].contrast = - peasycap->contrast; - peasycap->inputset[peasycap->input].contrast_ok = 1; - } else - JOM(8, "%i=peasycap->input\n", peasycap->input); - - mood = 0x00FF & (unsigned int) (peasycap->contrast - 128); - if (write_saa(peasycap->pusb_device, 0x0B, mood)) { - SAM("WARNING: failed to adjust contrast to " - "0x%02X\n", mood); - return -ENOENT; - } - SAM("adjusting contrast to 0x%02X\n", mood); - return 0; - } - i1++; - } - SAM("WARNING: failed to adjust contrast: control not found\n"); - return -ENOENT; -} -/*****************************************************************************/ -int adjust_saturation(struct easycap *peasycap, int value) -{ - unsigned int mood; - int i1, k; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (V4L2_CID_SATURATION == easycap_control[i1].id) { - if ((easycap_control[i1].minimum > value) || - (easycap_control[i1].maximum < value)) - value = easycap_control[i1].default_value; - - - if ((easycap_control[i1].minimum <= peasycap->saturation) && - (easycap_control[i1].maximum >= peasycap->saturation)) { - if (peasycap->saturation == value) { - SAM("unchanged saturation at 0x%02X\n", - value); - return 0; - } - } - peasycap->saturation = value; - for (k = 0; k < INPUT_MANY; k++) { - if (!peasycap->inputset[k].saturation_ok) - peasycap->inputset[k].saturation = - peasycap->saturation; - } - if ((0 <= peasycap->input) && (INPUT_MANY > peasycap->input)) { - peasycap->inputset[peasycap->input].saturation = - peasycap->saturation; - peasycap->inputset[peasycap->input].saturation_ok = 1; - } else - JOM(8, "%i=peasycap->input\n", peasycap->input); - mood = 0x00FF & (unsigned int) (peasycap->saturation - 128); - if (write_saa(peasycap->pusb_device, 0x0C, mood)) { - SAM("WARNING: failed to adjust saturation to " - "0x%02X\n", mood); - return -ENOENT; - } - SAM("adjusting saturation to 0x%02X\n", mood); - return 0; - break; - } - i1++; - } - SAM("WARNING: failed to adjust saturation: control not found\n"); - return -ENOENT; -} -/*****************************************************************************/ -int adjust_hue(struct easycap *peasycap, int value) -{ - unsigned int mood; - int i1, i2, k; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (V4L2_CID_HUE == easycap_control[i1].id) { - if ((easycap_control[i1].minimum > value) || - (easycap_control[i1].maximum < value)) - value = easycap_control[i1].default_value; - - if ((easycap_control[i1].minimum <= peasycap->hue) && - (easycap_control[i1].maximum >= peasycap->hue)) { - if (peasycap->hue == value) { - SAM("unchanged hue at 0x%02X\n", value); - return 0; - } - } - peasycap->hue = value; - for (k = 0; k < INPUT_MANY; k++) { - if (!peasycap->inputset[k].hue_ok) - peasycap->inputset[k].hue = peasycap->hue; - } - if (0 <= peasycap->input && INPUT_MANY > peasycap->input) { - peasycap->inputset[peasycap->input].hue = peasycap->hue; - peasycap->inputset[peasycap->input].hue_ok = 1; - } else - JOM(8, "%i=peasycap->input\n", peasycap->input); - i2 = peasycap->hue - 128; - mood = 0x00FF & ((int) i2); - if (write_saa(peasycap->pusb_device, 0x0D, mood)) { - SAM("WARNING: failed to adjust hue to 0x%02X\n", mood); - return -ENOENT; - } - SAM("adjusting hue to 0x%02X\n", mood); - return 0; - break; - } - i1++; - } - SAM("WARNING: failed to adjust hue: control not found\n"); - return -ENOENT; -} -/*****************************************************************************/ -static int adjust_volume(struct easycap *peasycap, int value) -{ - s8 mood; - int i1; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (V4L2_CID_AUDIO_VOLUME == easycap_control[i1].id) { - if ((easycap_control[i1].minimum > value) || - (easycap_control[i1].maximum < value)) - value = easycap_control[i1].default_value; - - if ((easycap_control[i1].minimum <= peasycap->volume) && - (easycap_control[i1].maximum >= peasycap->volume)) { - if (peasycap->volume == value) { - SAM("unchanged volume at 0x%02X\n", value); - return 0; - } - } - peasycap->volume = value; - mood = (16 > peasycap->volume) ? 16 : - ((31 < peasycap->volume) ? 31 : - (s8) peasycap->volume); - if (!easycap_audio_gainset(peasycap->pusb_device, mood)) { - SAM("WARNING: failed to adjust volume to " - "0x%2X\n", mood); - return -ENOENT; - } - SAM("adjusting volume to 0x%02X\n", mood); - return 0; - } - i1++; - } - SAM("WARNING: failed to adjust volume: control not found\n"); - return -ENOENT; -} -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* - * AN ALTERNATIVE METHOD OF MUTING MIGHT SEEM TO BE: - * usb_set_interface(peasycap->pusb_device, - * peasycap->audio_interface, - * peasycap->audio_altsetting_off); - * HOWEVER, AFTER THIS COMMAND IS ISSUED ALL SUBSEQUENT URBS RECEIVE STATUS - * -ESHUTDOWN. THE HANDLER ROUTINE easyxxx_complete() DECLINES TO RESUBMIT - * THE URB AND THE PIPELINE COLLAPSES IRRETRIEVABLY. BEWARE. - */ -/*---------------------------------------------------------------------------*/ -static int adjust_mute(struct easycap *peasycap, int value) -{ - int i1; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (V4L2_CID_AUDIO_MUTE == easycap_control[i1].id) { - peasycap->mute = value; - switch (peasycap->mute) { - case 1: { - peasycap->audio_idle = 1; - SAM("adjusting mute: %i=peasycap->audio_idle\n", - peasycap->audio_idle); - return 0; - } - default: { - peasycap->audio_idle = 0; - SAM("adjusting mute: %i=peasycap->audio_idle\n", - peasycap->audio_idle); - return 0; - } - } - break; - } - i1++; - } - SAM("WARNING: failed to adjust mute: control not found\n"); - return -ENOENT; -} -/*---------------------------------------------------------------------------*/ -long easycap_unlocked_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct easycap *peasycap; - struct usb_device *p; - int kd; - - if (!file) { - SAY("ERROR: file is NULL\n"); - return -ERESTARTSYS; - } - peasycap = file->private_data; - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -1; - } - p = peasycap->pusb_device; - if (!p) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - kd = easycap_isdongle(peasycap); - if (0 <= kd && DONGLE_MANY > kd) { - if (mutex_lock_interruptible(&easycapdc60_dongle[kd].mutex_video)) { - SAY("ERROR: cannot lock " - "easycapdc60_dongle[%i].mutex_video\n", kd); - return -ERESTARTSYS; - } - JOM(4, "locked easycapdc60_dongle[%i].mutex_video\n", kd); -/*---------------------------------------------------------------------------*/ -/* - * MEANWHILE, easycap_usb_disconnect() MAY HAVE FREED POINTER peasycap, - * IN WHICH CASE A REPEAT CALL TO isdongle() WILL FAIL. - * IF NECESSARY, BAIL OUT. - */ -/*---------------------------------------------------------------------------*/ - if (kd != easycap_isdongle(peasycap)) - return -ERESTARTSYS; - if (!file) { - SAY("ERROR: file is NULL\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ERESTARTSYS; - } - peasycap = file->private_data; - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ERESTARTSYS; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ERESTARTSYS; - } - } else { -/*---------------------------------------------------------------------------*/ -/* - * IF easycap_usb_disconnect() HAS ALREADY FREED POINTER peasycap BEFORE THE - * ATTEMPT TO ACQUIRE THE SEMAPHORE, isdongle() WILL HAVE FAILED. BAIL OUT. - */ -/*---------------------------------------------------------------------------*/ - return -ERESTARTSYS; - } -/*---------------------------------------------------------------------------*/ - switch (cmd) { - case VIDIOC_QUERYCAP: { - struct v4l2_capability v4l2_capability; - char version[16], *p1, *p2; - int i, rc, k[3]; - long lng; - - JOM(8, "VIDIOC_QUERYCAP\n"); - - if (16 <= strlen(EASYCAP_DRIVER_VERSION)) { - SAM("ERROR: bad driver version string\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - strcpy(&version[0], EASYCAP_DRIVER_VERSION); - for (i = 0; i < 3; i++) - k[i] = 0; - p2 = &version[0]; - i = 0; - while (*p2) { - p1 = p2; - while (*p2 && ('.' != *p2)) - p2++; - if (*p2) - *p2++ = 0; - if (3 > i) { - rc = (int) strict_strtol(p1, 10, &lng); - if (rc) { - SAM("ERROR: %i=strict_strtol(%s,.,,)\n", - rc, p1); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - k[i] = (int)lng; - } - i++; - } - - memset(&v4l2_capability, 0, sizeof(struct v4l2_capability)); - strlcpy(&v4l2_capability.driver[0], - "easycap", sizeof(v4l2_capability.driver)); - - v4l2_capability.capabilities = V4L2_CAP_VIDEO_CAPTURE | - V4L2_CAP_STREAMING | - V4L2_CAP_AUDIO | - V4L2_CAP_READWRITE; - - v4l2_capability.version = KERNEL_VERSION(k[0], k[1], k[2]); - JOM(8, "v4l2_capability.version=(%i,%i,%i)\n", k[0], k[1], k[2]); - - strlcpy(&v4l2_capability.card[0], - "EasyCAP DC60", sizeof(v4l2_capability.card)); - - if (usb_make_path(peasycap->pusb_device, - &v4l2_capability.bus_info[0], - sizeof(v4l2_capability.bus_info)) < 0) { - - strlcpy(&v4l2_capability.bus_info[0], "EasyCAP bus_info", - sizeof(v4l2_capability.bus_info)); - JOM(8, "%s=v4l2_capability.bus_info\n", - &v4l2_capability.bus_info[0]); - } - if (copy_to_user((void __user *)arg, &v4l2_capability, - sizeof(struct v4l2_capability))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_ENUMINPUT: { - struct v4l2_input v4l2_input; - u32 index; - - JOM(8, "VIDIOC_ENUMINPUT\n"); - - if (copy_from_user(&v4l2_input, (void __user *)arg, - sizeof(struct v4l2_input))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - index = v4l2_input.index; - memset(&v4l2_input, 0, sizeof(struct v4l2_input)); - - switch (index) { - case 0: { - v4l2_input.index = index; - strcpy(&v4l2_input.name[0], "CVBS0"); - v4l2_input.type = V4L2_INPUT_TYPE_CAMERA; - v4l2_input.audioset = 0x01; - v4l2_input.tuner = 0; - v4l2_input.std = V4L2_STD_PAL | - V4L2_STD_SECAM | - V4L2_STD_NTSC ; - v4l2_input.status = 0; - JOM(8, "%i=index: %s\n", index, &v4l2_input.name[0]); - break; - } - case 1: { - v4l2_input.index = index; - strcpy(&v4l2_input.name[0], "CVBS1"); - v4l2_input.type = V4L2_INPUT_TYPE_CAMERA; - v4l2_input.audioset = 0x01; - v4l2_input.tuner = 0; - v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | - V4L2_STD_NTSC; - v4l2_input.status = 0; - JOM(8, "%i=index: %s\n", index, &v4l2_input.name[0]); - break; - } - case 2: { - v4l2_input.index = index; - strcpy(&v4l2_input.name[0], "CVBS2"); - v4l2_input.type = V4L2_INPUT_TYPE_CAMERA; - v4l2_input.audioset = 0x01; - v4l2_input.tuner = 0; - v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | - V4L2_STD_NTSC ; - v4l2_input.status = 0; - JOM(8, "%i=index: %s\n", index, &v4l2_input.name[0]); - break; - } - case 3: { - v4l2_input.index = index; - strcpy(&v4l2_input.name[0], "CVBS3"); - v4l2_input.type = V4L2_INPUT_TYPE_CAMERA; - v4l2_input.audioset = 0x01; - v4l2_input.tuner = 0; - v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | - V4L2_STD_NTSC ; - v4l2_input.status = 0; - JOM(8, "%i=index: %s\n", index, &v4l2_input.name[0]); - break; - } - case 4: { - v4l2_input.index = index; - strcpy(&v4l2_input.name[0], "CVBS4"); - v4l2_input.type = V4L2_INPUT_TYPE_CAMERA; - v4l2_input.audioset = 0x01; - v4l2_input.tuner = 0; - v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | - V4L2_STD_NTSC ; - v4l2_input.status = 0; - JOM(8, "%i=index: %s\n", index, &v4l2_input.name[0]); - break; - } - case 5: { - v4l2_input.index = index; - strcpy(&v4l2_input.name[0], "S-VIDEO"); - v4l2_input.type = V4L2_INPUT_TYPE_CAMERA; - v4l2_input.audioset = 0x01; - v4l2_input.tuner = 0; - v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | - V4L2_STD_NTSC ; - v4l2_input.status = 0; - JOM(8, "%i=index: %s\n", index, &v4l2_input.name[0]); - break; - } - default: { - JOM(8, "%i=index: exhausts inputs\n", index); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - } - - if (copy_to_user((void __user *)arg, &v4l2_input, - sizeof(struct v4l2_input))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_G_INPUT: { - u32 index; - - JOM(8, "VIDIOC_G_INPUT\n"); - index = (u32)peasycap->input; - JOM(8, "user is told: %i\n", index); - if (copy_to_user((void __user *)arg, &index, sizeof(u32))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_S_INPUT: - { - u32 index; - int rc; - - JOM(8, "VIDIOC_S_INPUT\n"); - - if (0 != copy_from_user(&index, (void __user *)arg, sizeof(u32))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - JOM(8, "user requests input %i\n", index); - - if ((int)index == peasycap->input) { - SAM("requested input already in effect\n"); - break; - } - - if ((0 > index) || (INPUT_MANY <= index)) { - JOM(8, "ERROR: bad requested input: %i\n", index); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - - rc = easycap_newinput(peasycap, (int)index); - if (0 == rc) { - JOM(8, "newinput(.,%i) OK\n", (int)index); - } else { - SAM("ERROR: newinput(.,%i) returned %i\n", (int)index, rc); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_ENUMAUDIO: { - JOM(8, "VIDIOC_ENUMAUDIO\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_ENUMAUDOUT: { - struct v4l2_audioout v4l2_audioout; - - JOM(8, "VIDIOC_ENUMAUDOUT\n"); - - if (copy_from_user(&v4l2_audioout, (void __user *)arg, - sizeof(struct v4l2_audioout))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - if (0 != v4l2_audioout.index) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - memset(&v4l2_audioout, 0, sizeof(struct v4l2_audioout)); - v4l2_audioout.index = 0; - strcpy(&v4l2_audioout.name[0], "Soundtrack"); - - if (copy_to_user((void __user *)arg, &v4l2_audioout, - sizeof(struct v4l2_audioout))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_QUERYCTRL: { - int i1; - struct v4l2_queryctrl v4l2_queryctrl; - - JOM(8, "VIDIOC_QUERYCTRL\n"); - - if (0 != copy_from_user(&v4l2_queryctrl, (void __user *)arg, - sizeof(struct v4l2_queryctrl))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (easycap_control[i1].id == v4l2_queryctrl.id) { - JOM(8, "VIDIOC_QUERYCTRL %s=easycap_control[%i]" - ".name\n", &easycap_control[i1].name[0], i1); - memcpy(&v4l2_queryctrl, &easycap_control[i1], - sizeof(struct v4l2_queryctrl)); - break; - } - i1++; - } - if (0xFFFFFFFF == easycap_control[i1].id) { - JOM(8, "%i=index: exhausts controls\n", i1); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - if (copy_to_user((void __user *)arg, &v4l2_queryctrl, - sizeof(struct v4l2_queryctrl))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_QUERYMENU: { - JOM(8, "VIDIOC_QUERYMENU unsupported\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_G_CTRL: { - struct v4l2_control *pv4l2_control; - - JOM(8, "VIDIOC_G_CTRL\n"); - pv4l2_control = memdup_user((void __user *)arg, - sizeof(struct v4l2_control)); - if (IS_ERR(pv4l2_control)) { - SAM("ERROR: copy from user failed\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return PTR_ERR(pv4l2_control); - } - - switch (pv4l2_control->id) { - case V4L2_CID_BRIGHTNESS: { - pv4l2_control->value = peasycap->brightness; - JOM(8, "user enquires brightness: %i\n", pv4l2_control->value); - break; - } - case V4L2_CID_CONTRAST: { - pv4l2_control->value = peasycap->contrast; - JOM(8, "user enquires contrast: %i\n", pv4l2_control->value); - break; - } - case V4L2_CID_SATURATION: { - pv4l2_control->value = peasycap->saturation; - JOM(8, "user enquires saturation: %i\n", pv4l2_control->value); - break; - } - case V4L2_CID_HUE: { - pv4l2_control->value = peasycap->hue; - JOM(8, "user enquires hue: %i\n", pv4l2_control->value); - break; - } - case V4L2_CID_AUDIO_VOLUME: { - pv4l2_control->value = peasycap->volume; - JOM(8, "user enquires volume: %i\n", pv4l2_control->value); - break; - } - case V4L2_CID_AUDIO_MUTE: { - if (1 == peasycap->mute) - pv4l2_control->value = true; - else - pv4l2_control->value = false; - JOM(8, "user enquires mute: %i\n", pv4l2_control->value); - break; - } - default: { - SAM("ERROR: unknown V4L2 control: 0x%08X=id\n", - pv4l2_control->id); - kfree(pv4l2_control); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - } - if (copy_to_user((void __user *)arg, pv4l2_control, - sizeof(struct v4l2_control))) { - kfree(pv4l2_control); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - kfree(pv4l2_control); - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_S_CTRL: { - struct v4l2_control v4l2_control; - - JOM(8, "VIDIOC_S_CTRL\n"); - - if (0 != copy_from_user(&v4l2_control, (void __user *)arg, - sizeof(struct v4l2_control))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - switch (v4l2_control.id) { - case V4L2_CID_BRIGHTNESS: { - JOM(8, "user requests brightness %i\n", v4l2_control.value); - if (0 != adjust_brightness(peasycap, v4l2_control.value)) - ; - break; - } - case V4L2_CID_CONTRAST: { - JOM(8, "user requests contrast %i\n", v4l2_control.value); - if (0 != adjust_contrast(peasycap, v4l2_control.value)) - ; - break; - } - case V4L2_CID_SATURATION: { - JOM(8, "user requests saturation %i\n", v4l2_control.value); - if (0 != adjust_saturation(peasycap, v4l2_control.value)) - ; - break; - } - case V4L2_CID_HUE: { - JOM(8, "user requests hue %i\n", v4l2_control.value); - if (0 != adjust_hue(peasycap, v4l2_control.value)) - ; - break; - } - case V4L2_CID_AUDIO_VOLUME: { - JOM(8, "user requests volume %i\n", v4l2_control.value); - if (0 != adjust_volume(peasycap, v4l2_control.value)) - ; - break; - } - case V4L2_CID_AUDIO_MUTE: { - int mute; - - JOM(8, "user requests mute %i\n", v4l2_control.value); - if (v4l2_control.value) - mute = 1; - else - mute = 0; - - if (0 != adjust_mute(peasycap, mute)) - SAM("WARNING: failed to adjust mute to %i\n", mute); - break; - } - default: { - SAM("ERROR: unknown V4L2 control: 0x%08X=id\n", - v4l2_control.id); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_S_EXT_CTRLS: { - JOM(8, "VIDIOC_S_EXT_CTRLS unsupported\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_ENUM_FMT: { - u32 index; - struct v4l2_fmtdesc v4l2_fmtdesc; - - JOM(8, "VIDIOC_ENUM_FMT\n"); - - if (0 != copy_from_user(&v4l2_fmtdesc, (void __user *)arg, - sizeof(struct v4l2_fmtdesc))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - index = v4l2_fmtdesc.index; - memset(&v4l2_fmtdesc, 0, sizeof(struct v4l2_fmtdesc)); - - v4l2_fmtdesc.index = index; - v4l2_fmtdesc.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - - switch (index) { - case 0: { - v4l2_fmtdesc.flags = 0; - strcpy(&v4l2_fmtdesc.description[0], "uyvy"); - v4l2_fmtdesc.pixelformat = V4L2_PIX_FMT_UYVY; - JOM(8, "%i=index: %s\n", index, &v4l2_fmtdesc.description[0]); - break; - } - case 1: { - v4l2_fmtdesc.flags = 0; - strcpy(&v4l2_fmtdesc.description[0], "yuy2"); - v4l2_fmtdesc.pixelformat = V4L2_PIX_FMT_YUYV; - JOM(8, "%i=index: %s\n", index, &v4l2_fmtdesc.description[0]); - break; - } - case 2: { - v4l2_fmtdesc.flags = 0; - strcpy(&v4l2_fmtdesc.description[0], "rgb24"); - v4l2_fmtdesc.pixelformat = V4L2_PIX_FMT_RGB24; - JOM(8, "%i=index: %s\n", index, &v4l2_fmtdesc.description[0]); - break; - } - case 3: { - v4l2_fmtdesc.flags = 0; - strcpy(&v4l2_fmtdesc.description[0], "rgb32"); - v4l2_fmtdesc.pixelformat = V4L2_PIX_FMT_RGB32; - JOM(8, "%i=index: %s\n", index, &v4l2_fmtdesc.description[0]); - break; - } - case 4: { - v4l2_fmtdesc.flags = 0; - strcpy(&v4l2_fmtdesc.description[0], "bgr24"); - v4l2_fmtdesc.pixelformat = V4L2_PIX_FMT_BGR24; - JOM(8, "%i=index: %s\n", index, &v4l2_fmtdesc.description[0]); - break; - } - case 5: { - v4l2_fmtdesc.flags = 0; - strcpy(&v4l2_fmtdesc.description[0], "bgr32"); - v4l2_fmtdesc.pixelformat = V4L2_PIX_FMT_BGR32; - JOM(8, "%i=index: %s\n", index, &v4l2_fmtdesc.description[0]); - break; - } - default: { - JOM(8, "%i=index: exhausts formats\n", index); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - } - if (copy_to_user((void __user *)arg, &v4l2_fmtdesc, - sizeof(struct v4l2_fmtdesc))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ -/* - * THE RESPONSE TO VIDIOC_ENUM_FRAMESIZES MUST BE CONDITIONED ON THE - * THE CURRENT STANDARD, BECAUSE THAT IS WHAT gstreamer EXPECTS. BEWARE. - */ -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_ENUM_FRAMESIZES: { - u32 index; - struct v4l2_frmsizeenum v4l2_frmsizeenum; - - JOM(8, "VIDIOC_ENUM_FRAMESIZES\n"); - - if (0 != copy_from_user(&v4l2_frmsizeenum, (void __user *)arg, - sizeof(struct v4l2_frmsizeenum))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - index = v4l2_frmsizeenum.index; - - v4l2_frmsizeenum.type = (u32) V4L2_FRMSIZE_TYPE_DISCRETE; - - if (peasycap->ntsc) { - switch (index) { - case 0: { - v4l2_frmsizeenum.discrete.width = 640; - v4l2_frmsizeenum.discrete.height = 480; - JOM(8, "%i=index: %ix%i\n", index, - (int)(v4l2_frmsizeenum. - discrete.width), - (int)(v4l2_frmsizeenum. - discrete.height)); - break; - } - case 1: { - v4l2_frmsizeenum.discrete.width = 320; - v4l2_frmsizeenum.discrete.height = 240; - JOM(8, "%i=index: %ix%i\n", index, - (int)(v4l2_frmsizeenum. - discrete.width), - (int)(v4l2_frmsizeenum. - discrete.height)); - break; - } - case 2: { - v4l2_frmsizeenum.discrete.width = 720; - v4l2_frmsizeenum.discrete.height = 480; - JOM(8, "%i=index: %ix%i\n", index, - (int)(v4l2_frmsizeenum. - discrete.width), - (int)(v4l2_frmsizeenum. - discrete.height)); - break; - } - case 3: { - v4l2_frmsizeenum.discrete.width = 360; - v4l2_frmsizeenum.discrete.height = 240; - JOM(8, "%i=index: %ix%i\n", index, - (int)(v4l2_frmsizeenum. - discrete.width), - (int)(v4l2_frmsizeenum. - discrete.height)); - break; - } - default: { - JOM(8, "%i=index: exhausts framesizes\n", index); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - } - } else { - switch (index) { - case 0: { - v4l2_frmsizeenum.discrete.width = 640; - v4l2_frmsizeenum.discrete.height = 480; - JOM(8, "%i=index: %ix%i\n", index, - (int)(v4l2_frmsizeenum. - discrete.width), - (int)(v4l2_frmsizeenum. - discrete.height)); - break; - } - case 1: { - v4l2_frmsizeenum.discrete.width = 320; - v4l2_frmsizeenum.discrete.height = 240; - JOM(8, "%i=index: %ix%i\n", index, - (int)(v4l2_frmsizeenum. - discrete.width), - (int)(v4l2_frmsizeenum. - discrete.height)); - break; - } - case 2: { - v4l2_frmsizeenum.discrete.width = 704; - v4l2_frmsizeenum.discrete.height = 576; - JOM(8, "%i=index: %ix%i\n", index, - (int)(v4l2_frmsizeenum. - discrete.width), - (int)(v4l2_frmsizeenum. - discrete.height)); - break; - } - case 3: { - v4l2_frmsizeenum.discrete.width = 720; - v4l2_frmsizeenum.discrete.height = 576; - JOM(8, "%i=index: %ix%i\n", index, - (int)(v4l2_frmsizeenum. - discrete.width), - (int)(v4l2_frmsizeenum. - discrete.height)); - break; - } - case 4: { - v4l2_frmsizeenum.discrete.width = 360; - v4l2_frmsizeenum.discrete.height = 288; - JOM(8, "%i=index: %ix%i\n", index, - (int)(v4l2_frmsizeenum. - discrete.width), - (int)(v4l2_frmsizeenum. - discrete.height)); - break; - } - default: { - JOM(8, "%i=index: exhausts framesizes\n", index); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - } - } - if (copy_to_user((void __user *)arg, &v4l2_frmsizeenum, - sizeof(struct v4l2_frmsizeenum))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ -/* - * THE RESPONSE TO VIDIOC_ENUM_FRAMEINTERVALS MUST BE CONDITIONED ON THE - * THE CURRENT STANDARD, BECAUSE THAT IS WHAT gstreamer EXPECTS. BEWARE. - */ -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_ENUM_FRAMEINTERVALS: { - u32 index; - int denominator; - struct v4l2_frmivalenum v4l2_frmivalenum; - - JOM(8, "VIDIOC_ENUM_FRAMEINTERVALS\n"); - - if (peasycap->fps) - denominator = peasycap->fps; - else { - if (peasycap->ntsc) - denominator = 30; - else - denominator = 25; - } - - if (0 != copy_from_user(&v4l2_frmivalenum, (void __user *)arg, - sizeof(struct v4l2_frmivalenum))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - index = v4l2_frmivalenum.index; - - v4l2_frmivalenum.type = (u32) V4L2_FRMIVAL_TYPE_DISCRETE; - - switch (index) { - case 0: { - v4l2_frmivalenum.discrete.numerator = 1; - v4l2_frmivalenum.discrete.denominator = denominator; - JOM(8, "%i=index: %i/%i\n", index, - (int)(v4l2_frmivalenum.discrete.numerator), - (int)(v4l2_frmivalenum.discrete.denominator)); - break; - } - case 1: { - v4l2_frmivalenum.discrete.numerator = 1; - v4l2_frmivalenum.discrete.denominator = denominator/5; - JOM(8, "%i=index: %i/%i\n", index, - (int)(v4l2_frmivalenum.discrete.numerator), - (int)(v4l2_frmivalenum.discrete.denominator)); - break; - } - default: { - JOM(8, "%i=index: exhausts frameintervals\n", index); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - } - if (copy_to_user((void __user *)arg, &v4l2_frmivalenum, - sizeof(struct v4l2_frmivalenum))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_G_FMT: { - struct v4l2_format *pv4l2_format; - struct v4l2_pix_format *pv4l2_pix_format; - - JOM(8, "VIDIOC_G_FMT\n"); - pv4l2_format = kzalloc(sizeof(struct v4l2_format), GFP_KERNEL); - if (!pv4l2_format) { - SAM("ERROR: out of memory\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ENOMEM; - } - pv4l2_pix_format = kzalloc(sizeof(struct v4l2_pix_format), GFP_KERNEL); - if (!pv4l2_pix_format) { - SAM("ERROR: out of memory\n"); - kfree(pv4l2_format); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ENOMEM; - } - if (0 != copy_from_user(pv4l2_format, (void __user *)arg, - sizeof(struct v4l2_format))) { - kfree(pv4l2_format); - kfree(pv4l2_pix_format); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - if (pv4l2_format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { - kfree(pv4l2_format); - kfree(pv4l2_pix_format); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - - memset(pv4l2_pix_format, 0, sizeof(struct v4l2_pix_format)); - pv4l2_format->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - memcpy(&pv4l2_format->fmt.pix, - &easycap_format[peasycap->format_offset] - .v4l2_format.fmt.pix, sizeof(struct v4l2_pix_format)); - JOM(8, "user is told: %s\n", - &easycap_format[peasycap->format_offset].name[0]); - - if (copy_to_user((void __user *)arg, pv4l2_format, - sizeof(struct v4l2_format))) { - kfree(pv4l2_format); - kfree(pv4l2_pix_format); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - kfree(pv4l2_format); - kfree(pv4l2_pix_format); - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_TRY_FMT: - case VIDIOC_S_FMT: { - struct v4l2_format v4l2_format; - struct v4l2_pix_format v4l2_pix_format; - bool try; - int best_format; - - if (VIDIOC_TRY_FMT == cmd) { - JOM(8, "VIDIOC_TRY_FMT\n"); - try = true; - } else { - JOM(8, "VIDIOC_S_FMT\n"); - try = false; - } - - if (0 != copy_from_user(&v4l2_format, (void __user *)arg, - sizeof(struct v4l2_format))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - best_format = adjust_format(peasycap, - v4l2_format.fmt.pix.width, - v4l2_format.fmt.pix.height, - v4l2_format.fmt.pix.pixelformat, - v4l2_format.fmt.pix.field, - try); - if (0 > best_format) { - if (-EBUSY == best_format) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EBUSY; - } - JOM(8, "WARNING: adjust_format() returned %i\n", best_format); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ENOENT; - } -/*...........................................................................*/ - memset(&v4l2_pix_format, 0, sizeof(struct v4l2_pix_format)); - v4l2_format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - - memcpy(&(v4l2_format.fmt.pix), - &(easycap_format[best_format].v4l2_format.fmt.pix), - sizeof(v4l2_pix_format)); - JOM(8, "user is told: %s\n", &easycap_format[best_format].name[0]); - - if (copy_to_user((void __user *)arg, &v4l2_format, - sizeof(struct v4l2_format))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_CROPCAP: { - struct v4l2_cropcap v4l2_cropcap; - - JOM(8, "VIDIOC_CROPCAP\n"); - - if (0 != copy_from_user(&v4l2_cropcap, (void __user *)arg, - sizeof(struct v4l2_cropcap))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - if (v4l2_cropcap.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - JOM(8, "v4l2_cropcap.type != V4L2_BUF_TYPE_VIDEO_CAPTURE\n"); - - memset(&v4l2_cropcap, 0, sizeof(struct v4l2_cropcap)); - v4l2_cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - v4l2_cropcap.bounds.left = 0; - v4l2_cropcap.bounds.top = 0; - v4l2_cropcap.bounds.width = peasycap->width; - v4l2_cropcap.bounds.height = peasycap->height; - v4l2_cropcap.defrect.left = 0; - v4l2_cropcap.defrect.top = 0; - v4l2_cropcap.defrect.width = peasycap->width; - v4l2_cropcap.defrect.height = peasycap->height; - v4l2_cropcap.pixelaspect.numerator = 1; - v4l2_cropcap.pixelaspect.denominator = 1; - - JOM(8, "user is told: %ix%i\n", peasycap->width, peasycap->height); - - if (copy_to_user((void __user *)arg, &v4l2_cropcap, - sizeof(struct v4l2_cropcap))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_G_CROP: - case VIDIOC_S_CROP: { - JOM(8, "VIDIOC_G_CROP|VIDIOC_S_CROP unsupported\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_QUERYSTD: { - JOM(8, "VIDIOC_QUERYSTD: " - "EasyCAP is incapable of detecting standard\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - break; - } - /*-------------------------------------------------------------------*/ - /* - * THE MANIPULATIONS INVOLVING last0,last1,last2,last3 - * CONSTITUTE A WORKAROUND * FOR WHAT APPEARS TO BE - * A BUG IN 64-BIT mplayer. - * NOT NEEDED, BUT HOPEFULLY HARMLESS, FOR 32-BIT mplayer. - */ - /*------------------------------------------------------------------*/ - case VIDIOC_ENUMSTD: { - int last0 = -1, last1 = -1, last2 = -1, last3 = -1; - struct v4l2_standard v4l2_standard; - u32 index; - struct easycap_standard const *peasycap_standard; - - JOM(8, "VIDIOC_ENUMSTD\n"); - - if (0 != copy_from_user(&v4l2_standard, (void __user *)arg, - sizeof(struct v4l2_standard))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - index = v4l2_standard.index; - - last3 = last2; - last2 = last1; - last1 = last0; - last0 = index; - if ((index == last3) && (index == last2) && - (index == last1) && (index == last0)) { - index++; - last3 = last2; - last2 = last1; - last1 = last0; - last0 = index; - } - - memset(&v4l2_standard, 0, sizeof(struct v4l2_standard)); - - peasycap_standard = &easycap_standard[0]; - while (0xFFFF != peasycap_standard->mask) { - if ((int)(peasycap_standard - &easycap_standard[0]) == index) - break; - peasycap_standard++; - } - if (0xFFFF == peasycap_standard->mask) { - JOM(8, "%i=index: exhausts standards\n", index); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - JOM(8, "%i=index: %s\n", index, - &(peasycap_standard->v4l2_standard.name[0])); - memcpy(&v4l2_standard, &(peasycap_standard->v4l2_standard), - sizeof(struct v4l2_standard)); - - v4l2_standard.index = index; - - if (copy_to_user((void __user *)arg, &v4l2_standard, - sizeof(struct v4l2_standard))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_G_STD: { - v4l2_std_id std_id; - struct easycap_standard const *peasycap_standard; - - JOM(8, "VIDIOC_G_STD\n"); - - if (0 > peasycap->standard_offset) { - JOM(8, "%i=peasycap->standard_offset\n", - peasycap->standard_offset); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EBUSY; - } - - if (0 != copy_from_user(&std_id, (void __user *)arg, - sizeof(v4l2_std_id))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - peasycap_standard = &easycap_standard[peasycap->standard_offset]; - std_id = peasycap_standard->v4l2_standard.id; - - JOM(8, "user is told: %s\n", - &peasycap_standard->v4l2_standard.name[0]); - - if (copy_to_user((void __user *)arg, &std_id, - sizeof(v4l2_std_id))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_S_STD: { - v4l2_std_id std_id; - int rc; - - JOM(8, "VIDIOC_S_STD\n"); - - if (0 != copy_from_user(&std_id, (void __user *)arg, - sizeof(v4l2_std_id))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - JOM(8, "User requests standard: 0x%08X%08X\n", - (int)((std_id & (((v4l2_std_id)0xFFFFFFFF) << 32)) >> 32), - (int)(std_id & ((v4l2_std_id)0xFFFFFFFF))); - - rc = adjust_standard(peasycap, std_id); - if (0 > rc) { - JOM(8, "WARNING: adjust_standard() returned %i\n", rc); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ENOENT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_REQBUFS: { - int nbuffers; - struct v4l2_requestbuffers v4l2_requestbuffers; - - JOM(8, "VIDIOC_REQBUFS\n"); - - if (0 != copy_from_user(&v4l2_requestbuffers, - (void __user *)arg, - sizeof(struct v4l2_requestbuffers))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - if (v4l2_requestbuffers.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - if (v4l2_requestbuffers.memory != V4L2_MEMORY_MMAP) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - nbuffers = v4l2_requestbuffers.count; - JOM(8, " User requests %i buffers ...\n", nbuffers); - if (nbuffers < 2) - nbuffers = 2; - if (nbuffers > FRAME_BUFFER_MANY) - nbuffers = FRAME_BUFFER_MANY; - if (v4l2_requestbuffers.count == nbuffers) { - JOM(8, " ... agree to %i buffers\n", - nbuffers); - } else { - JOM(8, " ... insist on %i buffers\n", - nbuffers); - v4l2_requestbuffers.count = nbuffers; - } - peasycap->frame_buffer_many = nbuffers; - - if (copy_to_user((void __user *)arg, &v4l2_requestbuffers, - sizeof(struct v4l2_requestbuffers))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_QUERYBUF: { - u32 index; - struct v4l2_buffer v4l2_buffer; - - JOM(8, "VIDIOC_QUERYBUF\n"); - - if (peasycap->video_eof) { - JOM(8, "returning -EIO because %i=video_eof\n", - peasycap->video_eof); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EIO; - } - - if (0 != copy_from_user(&v4l2_buffer, (void __user *)arg, - sizeof(struct v4l2_buffer))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - if (v4l2_buffer.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - index = v4l2_buffer.index; - if (index < 0 || index >= peasycap->frame_buffer_many) - return -EINVAL; - memset(&v4l2_buffer, 0, sizeof(struct v4l2_buffer)); - v4l2_buffer.index = index; - v4l2_buffer.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - v4l2_buffer.bytesused = peasycap->frame_buffer_used; - v4l2_buffer.flags = V4L2_BUF_FLAG_MAPPED | - peasycap->done[index] | - peasycap->queued[index]; - v4l2_buffer.field = V4L2_FIELD_NONE; - v4l2_buffer.memory = V4L2_MEMORY_MMAP; - v4l2_buffer.m.offset = index * FRAME_BUFFER_SIZE; - v4l2_buffer.length = FRAME_BUFFER_SIZE; - - JOM(16, " %10i=index\n", v4l2_buffer.index); - JOM(16, " 0x%08X=type\n", v4l2_buffer.type); - JOM(16, " %10i=bytesused\n", v4l2_buffer.bytesused); - JOM(16, " 0x%08X=flags\n", v4l2_buffer.flags); - JOM(16, " %10i=field\n", v4l2_buffer.field); - JOM(16, " %10li=timestamp.tv_usec\n", - (long)v4l2_buffer.timestamp.tv_usec); - JOM(16, " %10i=sequence\n", v4l2_buffer.sequence); - JOM(16, " 0x%08X=memory\n", v4l2_buffer.memory); - JOM(16, " %10i=m.offset\n", v4l2_buffer.m.offset); - JOM(16, " %10i=length\n", v4l2_buffer.length); - - if (copy_to_user((void __user *)arg, &v4l2_buffer, - sizeof(struct v4l2_buffer))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_QBUF: { - struct v4l2_buffer v4l2_buffer; - - JOM(8, "VIDIOC_QBUF\n"); - - if (0 != copy_from_user(&v4l2_buffer, (void __user *)arg, - sizeof(struct v4l2_buffer))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - if (v4l2_buffer.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - if (v4l2_buffer.memory != V4L2_MEMORY_MMAP) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - if (v4l2_buffer.index < 0 || - v4l2_buffer.index >= peasycap->frame_buffer_many) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - v4l2_buffer.flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_QUEUED; - - peasycap->done[v4l2_buffer.index] = 0; - peasycap->queued[v4l2_buffer.index] = V4L2_BUF_FLAG_QUEUED; - - if (copy_to_user((void __user *)arg, &v4l2_buffer, - sizeof(struct v4l2_buffer))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - JOM(8, "..... user queueing frame buffer %i\n", - (int)v4l2_buffer.index); - - peasycap->frame_lock = 0; - - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_DQBUF: - { - struct timeval timeval, timeval2; - int i, j; - struct v4l2_buffer v4l2_buffer; - int rcdq; - u16 input; - - JOM(8, "VIDIOC_DQBUF\n"); - - if ((peasycap->video_idle) || (peasycap->video_eof)) { - JOM(8, "returning -EIO because " - "%i=video_idle %i=video_eof\n", - peasycap->video_idle, peasycap->video_eof); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EIO; - } - - if (copy_from_user(&v4l2_buffer, (void __user *)arg, - sizeof(struct v4l2_buffer))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - if (v4l2_buffer.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - - if (peasycap->offerfields) { - /*---------------------------------------------------*/ - /* - * IN ITS 50 "fps" MODE tvtime SEEMS ALWAYS TO REQUEST - * V4L2_FIELD_BOTTOM - */ - /*---------------------------------------------------*/ - if (V4L2_FIELD_TOP == v4l2_buffer.field) - JOM(8, "user wants V4L2_FIELD_TOP\n"); - else if (V4L2_FIELD_BOTTOM == v4l2_buffer.field) - JOM(8, "user wants V4L2_FIELD_BOTTOM\n"); - else if (V4L2_FIELD_ANY == v4l2_buffer.field) - JOM(8, "user wants V4L2_FIELD_ANY\n"); - else - JOM(8, "user wants V4L2_FIELD_...UNKNOWN: %i\n", - v4l2_buffer.field); - } - - if (!peasycap->video_isoc_streaming) { - JOM(16, "returning -EIO because video urbs not streaming\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EIO; - } - /*-------------------------------------------------------------------*/ - /* - * IF THE USER HAS PREVIOUSLY CALLED easycap_poll(), - * AS DETERMINED BY FINDING - * THE FLAG peasycap->polled SET, THERE MUST BE - * NO FURTHER WAIT HERE. IN THIS - * CASE, JUST CHOOSE THE FRAME INDICATED BY peasycap->frame_read - */ - /*-------------------------------------------------------------------*/ - - if (!peasycap->polled) { - do { - rcdq = easycap_video_dqbuf(peasycap, 0); - if (-EIO == rcdq) { - JOM(8, "returning -EIO because " - "dqbuf() returned -EIO\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EIO; - } - } while (0 != rcdq); - } else { - if (peasycap->video_eof) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EIO; - } - } - if (V4L2_BUF_FLAG_DONE != peasycap->done[peasycap->frame_read]) { - JOM(8, "V4L2_BUF_FLAG_DONE != 0x%08X\n", - peasycap->done[peasycap->frame_read]); - } - peasycap->polled = 0; - - if (!(peasycap->isequence % 10)) { - for (i = 0; i < 179; i++) - peasycap->merit[i] = peasycap->merit[i+1]; - peasycap->merit[179] = merit_saa(peasycap->pusb_device); - j = 0; - for (i = 0; i < 180; i++) - j += peasycap->merit[i]; - if (90 < j) { - SAM("easycap driver shutting down " - "on condition blue\n"); - peasycap->video_eof = 1; - peasycap->audio_eof = 1; - } - } - - v4l2_buffer.index = peasycap->frame_read; - v4l2_buffer.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - v4l2_buffer.bytesused = peasycap->frame_buffer_used; - v4l2_buffer.flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_DONE; - if (peasycap->offerfields) - v4l2_buffer.field = V4L2_FIELD_BOTTOM; - else - v4l2_buffer.field = V4L2_FIELD_NONE; - do_gettimeofday(&timeval); - timeval2 = timeval; - - v4l2_buffer.timestamp = timeval2; - v4l2_buffer.sequence = peasycap->isequence++; - v4l2_buffer.memory = V4L2_MEMORY_MMAP; - v4l2_buffer.m.offset = v4l2_buffer.index * FRAME_BUFFER_SIZE; - v4l2_buffer.length = FRAME_BUFFER_SIZE; - - JOM(16, " %10i=index\n", v4l2_buffer.index); - JOM(16, " 0x%08X=type\n", v4l2_buffer.type); - JOM(16, " %10i=bytesused\n", v4l2_buffer.bytesused); - JOM(16, " 0x%08X=flags\n", v4l2_buffer.flags); - JOM(16, " %10i=field\n", v4l2_buffer.field); - JOM(16, " %10li=timestamp.tv_sec\n", - (long)v4l2_buffer.timestamp.tv_sec); - JOM(16, " %10li=timestamp.tv_usec\n", - (long)v4l2_buffer.timestamp.tv_usec); - JOM(16, " %10i=sequence\n", v4l2_buffer.sequence); - JOM(16, " 0x%08X=memory\n", v4l2_buffer.memory); - JOM(16, " %10i=m.offset\n", v4l2_buffer.m.offset); - JOM(16, " %10i=length\n", v4l2_buffer.length); - - if (copy_to_user((void __user *)arg, &v4l2_buffer, - sizeof(struct v4l2_buffer))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - input = peasycap->frame_buffer[peasycap->frame_read][0].input; - if (0x08 & input) { - JOM(8, "user is offered frame buffer %i, input %i\n", - peasycap->frame_read, (0x07 & input)); - } else { - JOM(8, "user is offered frame buffer %i\n", - peasycap->frame_read); - } - peasycap->frame_lock = 1; - JOM(8, "%i=peasycap->frame_fill\n", peasycap->frame_fill); - if (peasycap->frame_read == peasycap->frame_fill) { - if (peasycap->frame_lock) { - JOM(8, "WORRY: filling frame buffer " - "while offered to user\n"); - } - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_STREAMON: { - int i; - - JOM(8, "VIDIOC_STREAMON\n"); - - peasycap->isequence = 0; - for (i = 0; i < 180; i++) - peasycap->merit[i] = 0; - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - easycap_video_submit_urbs(peasycap); - peasycap->video_idle = 0; - peasycap->audio_idle = 0; - peasycap->video_eof = 0; - peasycap->audio_eof = 0; - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_STREAMOFF: { - JOM(8, "VIDIOC_STREAMOFF\n"); - - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - peasycap->video_idle = 1; - peasycap->audio_idle = 1; -/*---------------------------------------------------------------------------*/ -/* - * IF THE WAIT QUEUES ARE NOT CLEARED IN RESPONSE TO THE STREAMOFF COMMAND - * THE USERSPACE PROGRAM, E.G. mplayer, MAY HANG ON EXIT. BEWARE. - */ -/*---------------------------------------------------------------------------*/ - JOM(8, "calling wake_up on wq_video and wq_audio\n"); - wake_up_interruptible(&(peasycap->wq_video)); - if (peasycap->psubstream) - snd_pcm_period_elapsed(peasycap->psubstream); - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_G_PARM: { - struct v4l2_streamparm *pv4l2_streamparm; - - JOM(8, "VIDIOC_G_PARM\n"); - pv4l2_streamparm = memdup_user((void __user *)arg, - sizeof(struct v4l2_streamparm)); - if (IS_ERR(pv4l2_streamparm)) { - SAM("ERROR: copy from user failed\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return PTR_ERR(pv4l2_streamparm); - } - - if (pv4l2_streamparm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { - kfree(pv4l2_streamparm); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - pv4l2_streamparm->parm.capture.capability = 0; - pv4l2_streamparm->parm.capture.capturemode = 0; - pv4l2_streamparm->parm.capture.timeperframe.numerator = 1; - - if (peasycap->fps) { - pv4l2_streamparm->parm.capture.timeperframe. - denominator = peasycap->fps; - } else { - if (peasycap->ntsc) { - pv4l2_streamparm->parm.capture.timeperframe. - denominator = 30; - } else { - pv4l2_streamparm->parm.capture.timeperframe. - denominator = 25; - } - } - - pv4l2_streamparm->parm.capture.readbuffers = - peasycap->frame_buffer_many; - pv4l2_streamparm->parm.capture.extendedmode = 0; - if (copy_to_user((void __user *)arg, - pv4l2_streamparm, - sizeof(struct v4l2_streamparm))) { - kfree(pv4l2_streamparm); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - kfree(pv4l2_streamparm); - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_S_PARM: { - JOM(8, "VIDIOC_S_PARM unsupported\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_G_AUDIO: { - JOM(8, "VIDIOC_G_AUDIO unsupported\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_S_AUDIO: { - JOM(8, "VIDIOC_S_AUDIO unsupported\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_S_TUNER: { - JOM(8, "VIDIOC_S_TUNER unsupported\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_G_FBUF: - case VIDIOC_S_FBUF: - case VIDIOC_OVERLAY: { - JOM(8, "VIDIOC_G_FBUF|VIDIOC_S_FBUF|VIDIOC_OVERLAY unsupported\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_G_TUNER: { - JOM(8, "VIDIOC_G_TUNER unsupported\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - case VIDIOC_G_FREQUENCY: - case VIDIOC_S_FREQUENCY: { - JOM(8, "VIDIOC_G_FREQUENCY|VIDIOC_S_FREQUENCY unsupported\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - default: { - JOM(8, "ERROR: unrecognized V4L2 IOCTL command: 0x%08X\n", cmd); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ENOIOCTLCMD; - } - } - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - JOM(4, "unlocked easycapdc60_dongle[%i].mutex_video\n", kd); - return 0; -} -/*****************************************************************************/ diff --git a/drivers/staging/media/easycap/easycap_low.c b/drivers/staging/media/easycap/easycap_low.c deleted file mode 100644 index 0380babed22c02b62db3c8f7ceb1096ad24d4190..0000000000000000000000000000000000000000 --- a/drivers/staging/media/easycap/easycap_low.c +++ /dev/null @@ -1,968 +0,0 @@ -/***************************************************************************** -* * -* * -* easycap_low.c * -* * -* * -*****************************************************************************/ -/* - * - * Copyright (C) 2010 R.M. Thomas - * - * - * This is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The software is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this software; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ -/*****************************************************************************/ -/* - * ACKNOWLEGEMENTS AND REFERENCES - * ------------------------------ - * This driver makes use of register information contained in the Syntek - * Semicon DC-1125 driver hosted at - * http://sourceforge.net/projects/syntekdriver/. - * Particularly useful has been a patch to the latter driver provided by - * Ivor Hewitt in January 2009. The NTSC implementation is taken from the - * work of Ben Trask. -*/ -/****************************************************************************/ - -#include "easycap.h" - - -#define GET(X, Y, Z) do { \ - int __rc; \ - *(Z) = (u16)0; \ - __rc = regget(X, Y, Z, sizeof(u8)); \ - if (0 > __rc) { \ - JOT(8, ":-(%i\n", __LINE__); return __rc; \ - } \ -} while (0) - -#define SET(X, Y, Z) do { \ - int __rc; \ - __rc = regset(X, Y, Z); \ - if (0 > __rc) { \ - JOT(8, ":-(%i\n", __LINE__); return __rc; \ - } \ -} while (0) - -/*--------------------------------------------------------------------------*/ -static const struct stk1160config { - u16 reg; - u16 set; -} stk1160configPAL[] = { - {0x000, 0x0098}, - {0x002, 0x0093}, - - {0x001, 0x0003}, - {0x003, 0x0080}, - {0x00D, 0x0000}, - {0x00F, 0x0002}, - {0x018, 0x0010}, - {0x019, 0x0000}, - {0x01A, 0x0014}, - {0x01B, 0x000E}, - {0x01C, 0x0046}, - - {0x100, 0x0033}, - {0x103, 0x0000}, - {0x104, 0x0000}, - {0x105, 0x0000}, - {0x106, 0x0000}, - -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ -/* - * RESOLUTION 640x480 -*/ -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - {0x110, 0x0008}, - {0x111, 0x0000}, - {0x112, 0x0020}, - {0x113, 0x0000}, - {0x114, 0x0508}, - {0x115, 0x0005}, - {0x116, 0x0110}, - {0x117, 0x0001}, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - - {0x202, 0x000F}, - {0x203, 0x004A}, - {0x2FF, 0x0000}, - - {0xFFF, 0xFFFF} -}; -/*--------------------------------------------------------------------------*/ -static const struct stk1160config stk1160configNTSC[] = { - {0x000, 0x0098}, - {0x002, 0x0093}, - - {0x001, 0x0003}, - {0x003, 0x0080}, - {0x00D, 0x0000}, - {0x00F, 0x0002}, - {0x018, 0x0010}, - {0x019, 0x0000}, - {0x01A, 0x0014}, - {0x01B, 0x000E}, - {0x01C, 0x0046}, - - {0x100, 0x0033}, - {0x103, 0x0000}, - {0x104, 0x0000}, - {0x105, 0x0000}, - {0x106, 0x0000}, - -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ -/* - * RESOLUTION 640x480 -*/ -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - {0x110, 0x0008}, - {0x111, 0x0000}, - {0x112, 0x0003}, - {0x113, 0x0000}, - {0x114, 0x0508}, - {0x115, 0x0005}, - {0x116, 0x00F3}, - {0x117, 0x0000}, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - - {0x202, 0x000F}, - {0x203, 0x004A}, - {0x2FF, 0x0000}, - - {0xFFF, 0xFFFF} -}; -/*--------------------------------------------------------------------------*/ -static const struct saa7113config { - u8 reg; - u8 set; -} saa7113configPAL[] = { - {0x01, 0x08}, - {0x02, 0x80}, - {0x03, 0x33}, - {0x04, 0x00}, - {0x05, 0x00}, - {0x06, 0xE9}, - {0x07, 0x0D}, - {0x08, 0x38}, - {0x09, 0x00}, - {0x0A, SAA_0A_DEFAULT}, - {0x0B, SAA_0B_DEFAULT}, - {0x0C, SAA_0C_DEFAULT}, - {0x0D, SAA_0D_DEFAULT}, - {0x0E, 0x01}, - {0x0F, 0x36}, - {0x10, 0x00}, - {0x11, 0x0C}, - {0x12, 0xE7}, - {0x13, 0x00}, - {0x15, 0x00}, - {0x16, 0x00}, - {0x40, 0x02}, - {0x41, 0xFF}, - {0x42, 0xFF}, - {0x43, 0xFF}, - {0x44, 0xFF}, - {0x45, 0xFF}, - {0x46, 0xFF}, - {0x47, 0xFF}, - {0x48, 0xFF}, - {0x49, 0xFF}, - {0x4A, 0xFF}, - {0x4B, 0xFF}, - {0x4C, 0xFF}, - {0x4D, 0xFF}, - {0x4E, 0xFF}, - {0x4F, 0xFF}, - {0x50, 0xFF}, - {0x51, 0xFF}, - {0x52, 0xFF}, - {0x53, 0xFF}, - {0x54, 0xFF}, - {0x55, 0xFF}, - {0x56, 0xFF}, - {0x57, 0xFF}, - {0x58, 0x40}, - {0x59, 0x54}, - {0x5A, 0x07}, - {0x5B, 0x83}, - - {0xFF, 0xFF} -}; -/*--------------------------------------------------------------------------*/ -static const struct saa7113config saa7113configNTSC[] = { - {0x01, 0x08}, - {0x02, 0x80}, - {0x03, 0x33}, - {0x04, 0x00}, - {0x05, 0x00}, - {0x06, 0xE9}, - {0x07, 0x0D}, - {0x08, 0x78}, - {0x09, 0x00}, - {0x0A, SAA_0A_DEFAULT}, - {0x0B, SAA_0B_DEFAULT}, - {0x0C, SAA_0C_DEFAULT}, - {0x0D, SAA_0D_DEFAULT}, - {0x0E, 0x01}, - {0x0F, 0x36}, - {0x10, 0x00}, - {0x11, 0x0C}, - {0x12, 0xE7}, - {0x13, 0x00}, - {0x15, 0x00}, - {0x16, 0x00}, - {0x40, 0x82}, - {0x41, 0xFF}, - {0x42, 0xFF}, - {0x43, 0xFF}, - {0x44, 0xFF}, - {0x45, 0xFF}, - {0x46, 0xFF}, - {0x47, 0xFF}, - {0x48, 0xFF}, - {0x49, 0xFF}, - {0x4A, 0xFF}, - {0x4B, 0xFF}, - {0x4C, 0xFF}, - {0x4D, 0xFF}, - {0x4E, 0xFF}, - {0x4F, 0xFF}, - {0x50, 0xFF}, - {0x51, 0xFF}, - {0x52, 0xFF}, - {0x53, 0xFF}, - {0x54, 0xFF}, - {0x55, 0xFF}, - {0x56, 0xFF}, - {0x57, 0xFF}, - {0x58, 0x40}, - {0x59, 0x54}, - {0x5A, 0x0A}, - {0x5B, 0x83}, - - {0xFF, 0xFF} -}; - -static int regget(struct usb_device *pusb_device, - u16 index, void *reg, int reg_size) -{ - int rc; - - if (!pusb_device) - return -ENODEV; - - rc = usb_control_msg(pusb_device, usb_rcvctrlpipe(pusb_device, 0), - 0x00, - (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE), - 0x00, - index, reg, reg_size, 50000); - - return rc; -} - -static int regset(struct usb_device *pusb_device, u16 index, u16 value) -{ - int rc; - - if (!pusb_device) - return -ENODEV; - - rc = usb_control_msg(pusb_device, usb_sndctrlpipe(pusb_device, 0), - 0x01, - (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE), - value, index, NULL, 0, 500); - - if (rc < 0) - return rc; - - if (easycap_readback) { - u16 igot = 0; - rc = regget(pusb_device, index, &igot, sizeof(igot)); - igot = 0xFF & igot; - switch (index) { - case 0x000: - case 0x500: - case 0x502: - case 0x503: - case 0x504: - case 0x506: - case 0x507: - break; - - case 0x204: - case 0x205: - case 0x350: - case 0x351: - if (igot) - JOT(8, "unexpected 0x%02X " - "for STK register 0x%03X\n", - igot, index); - break; - - default: - if ((0xFF & value) != igot) - JOT(8, "unexpected 0x%02X != 0x%02X " - "for STK register 0x%03X\n", - igot, value, index); - break; - } - } - - return rc; -} -/*--------------------------------------------------------------------------*/ -/* - * FUNCTION wait_i2c() RETURNS 0 ON SUCCESS -*/ -/*--------------------------------------------------------------------------*/ -static int wait_i2c(struct usb_device *p) -{ - u16 get0; - u8 igot; - const int max = 2; - int k; - - if (!p) - return -ENODEV; - - for (k = 0; k < max; k++) { - GET(p, 0x0201, &igot); get0 = igot; - switch (get0) { - case 0x04: - case 0x01: - return 0; - case 0x00: - msleep(20); - continue; - default: - return get0 - 1; - } - } - return -1; -} - -/****************************************************************************/ -int write_saa(struct usb_device *p, u16 reg0, u16 set0) -{ - if (!p) - return -ENODEV; - SET(p, 0x200, 0x00); - SET(p, 0x204, reg0); - SET(p, 0x205, set0); - SET(p, 0x200, 0x01); - return wait_i2c(p); -} -/****************************************************************************/ -/*--------------------------------------------------------------------------*/ -/* - * REGISTER 500: SETTING VALUE TO 0x008B READS FROM VT1612A (?) - * REGISTER 500: SETTING VALUE TO 0x008C WRITES TO VT1612A - * REGISTER 502: LEAST SIGNIFICANT BYTE OF VALUE TO SET - * REGISTER 503: MOST SIGNIFICANT BYTE OF VALUE TO SET - * REGISTER 504: TARGET ADDRESS ON VT1612A - */ -/*--------------------------------------------------------------------------*/ -static int write_vt(struct usb_device *p, u16 reg0, u16 set0) -{ - u8 igot; - u16 got502, got503; - u16 set502, set503; - - if (!p) - return -ENODEV; - SET(p, 0x0504, reg0); - SET(p, 0x0500, 0x008B); - - GET(p, 0x0502, &igot); got502 = (0xFF & igot); - GET(p, 0x0503, &igot); got503 = (0xFF & igot); - - JOT(16, "write_vt(., 0x%04X, 0x%04X): was 0x%04X\n", - reg0, set0, ((got503 << 8) | got502)); - - set502 = (0x00FF & set0); - set503 = ((0xFF00 & set0) >> 8); - - SET(p, 0x0504, reg0); - SET(p, 0x0502, set502); - SET(p, 0x0503, set503); - SET(p, 0x0500, 0x008C); - - return 0; -} -/****************************************************************************/ -/*--------------------------------------------------------------------------*/ -/* - * REGISTER 500: SETTING VALUE TO 0x008B READS FROM VT1612A (?) - * REGISTER 500: SETTING VALUE TO 0x008C WRITES TO VT1612A - * REGISTER 502: LEAST SIGNIFICANT BYTE OF VALUE TO GET - * REGISTER 503: MOST SIGNIFICANT BYTE OF VALUE TO GET - * REGISTER 504: TARGET ADDRESS ON VT1612A - */ -/*--------------------------------------------------------------------------*/ -static int read_vt(struct usb_device *p, u16 reg0) -{ - u8 igot; - u16 got502, got503; - - if (!p) - return -ENODEV; - SET(p, 0x0504, reg0); - SET(p, 0x0500, 0x008B); - - GET(p, 0x0502, &igot); got502 = (0xFF & igot); - GET(p, 0x0503, &igot); got503 = (0xFF & igot); - - JOT(16, "read_vt(., 0x%04X): has 0x%04X\n", - reg0, ((got503 << 8) | got502)); - - return (got503 << 8) | got502; -} -/****************************************************************************/ -/*--------------------------------------------------------------------------*/ -/* - * THESE APPEAR TO HAVE NO EFFECT ON EITHER VIDEO OR AUDIO. - */ -/*--------------------------------------------------------------------------*/ -static int write_300(struct usb_device *p) -{ - if (!p) - return -ENODEV; - SET(p, 0x300, 0x0012); - SET(p, 0x350, 0x002D); - SET(p, 0x351, 0x0001); - SET(p, 0x352, 0x0000); - SET(p, 0x353, 0x0000); - SET(p, 0x300, 0x0080); - return 0; -} -/****************************************************************************/ -/****************************************************************************/ -int setup_stk(struct usb_device *p, bool ntsc) -{ - int i; - const struct stk1160config *cfg; - if (!p) - return -ENODEV; - cfg = (ntsc) ? stk1160configNTSC : stk1160configPAL; - for (i = 0; cfg[i].reg != 0xFFF; i++) - SET(p, cfg[i].reg, cfg[i].set); - - write_300(p); - - return 0; -} -/****************************************************************************/ -int setup_saa(struct usb_device *p, bool ntsc) -{ - int i, rc; - const struct saa7113config *cfg; - if (!p) - return -ENODEV; - cfg = (ntsc) ? saa7113configNTSC : saa7113configPAL; - for (i = 0; cfg[i].reg != 0xFF; i++) { - rc = write_saa(p, cfg[i].reg, cfg[i].set); - if (rc) - dev_err(&p->dev, - "Failed to set SAA register %d", cfg[i].reg); - } - return 0; -} -/****************************************************************************/ -int merit_saa(struct usb_device *p) -{ - int rc; - - if (!p) - return -ENODEV; - rc = read_saa(p, 0x1F); - return ((0 > rc) || (0x02 & rc)) ? 1 : 0; -} -/****************************************************************************/ -int ready_saa(struct usb_device *p) -{ - int j, rc, rate; - const int max = 5, marktime = PATIENCE/5; -/*--------------------------------------------------------------------------*/ -/* - * RETURNS 0 FOR INTERLACED 50 Hz - * 1 FOR NON-INTERLACED 50 Hz - * 2 FOR INTERLACED 60 Hz - * 3 FOR NON-INTERLACED 60 Hz -*/ -/*--------------------------------------------------------------------------*/ - if (!p) - return -ENODEV; - j = 0; - while (max > j) { - rc = read_saa(p, 0x1F); - if (0 <= rc) { - if (0 == (0x40 & rc)) - break; - if (1 == (0x01 & rc)) - break; - } - msleep(marktime); - j++; - } - - if (max == j) - return -1; - - if (0x20 & rc) { - rate = 2; - JOT(8, "hardware detects 60 Hz\n"); - } else { - rate = 0; - JOT(8, "hardware detects 50 Hz\n"); - } - if (0x80 & rc) - JOT(8, "hardware detects interlacing\n"); - else { - rate++; - JOT(8, "hardware detects no interlacing\n"); - } - return 0; -} -/****************************************************************************/ -int read_saa(struct usb_device *p, u16 reg0) -{ - u8 igot; - - if (!p) - return -ENODEV; - SET(p, 0x208, reg0); - SET(p, 0x200, 0x20); - if (0 != wait_i2c(p)) - return -1; - igot = 0; - GET(p, 0x0209, &igot); - return igot; -} -/****************************************************************************/ -static int read_stk(struct usb_device *p, u32 reg0) -{ - u8 igot; - - if (!p) - return -ENODEV; - igot = 0; - GET(p, reg0, &igot); - return igot; -} -int select_input(struct usb_device *p, int input, int mode) -{ - int ir; - - if (!p) - return -ENODEV; - stop_100(p); - switch (input) { - case 0: - case 1: { - if (0 != write_saa(p, 0x02, 0x80)) - SAY("ERROR: failed to set SAA register 0x02 " - "for input %i\n", input); - - SET(p, 0x0000, 0x0098); - SET(p, 0x0002, 0x0078); - break; - } - case 2: { - if (0 != write_saa(p, 0x02, 0x80)) - SAY("ERROR: failed to set SAA register 0x02 " - "for input %i\n", input); - - SET(p, 0x0000, 0x0090); - SET(p, 0x0002, 0x0078); - break; - } - case 3: { - if (0 != write_saa(p, 0x02, 0x80)) - SAY("ERROR: failed to set SAA register 0x02 " - " for input %i\n", input); - - SET(p, 0x0000, 0x0088); - SET(p, 0x0002, 0x0078); - break; - } - case 4: { - if (0 != write_saa(p, 0x02, 0x80)) { - SAY("ERROR: failed to set SAA register 0x02 " - "for input %i\n", input); - } - SET(p, 0x0000, 0x0080); - SET(p, 0x0002, 0x0078); - break; - } - case 5: { - if (9 != mode) - mode = 7; - switch (mode) { - case 7: { - if (0 != write_saa(p, 0x02, 0x87)) - SAY("ERROR: failed to set SAA register 0x02 " - "for input %i\n", input); - - if (0 != write_saa(p, 0x05, 0xFF)) - SAY("ERROR: failed to set SAA register 0x05 " - "for input %i\n", input); - - break; - } - case 9: { - if (0 != write_saa(p, 0x02, 0x89)) - SAY("ERROR: failed to set SAA register 0x02 " - "for input %i\n", input); - - if (0 != write_saa(p, 0x05, 0x00)) - SAY("ERROR: failed to set SAA register 0x05 " - "for input %i\n", input); - - break; - } - default: - SAY("MISTAKE: bad mode: %i\n", mode); - return -1; - } - - if (0 != write_saa(p, 0x04, 0x00)) - SAY("ERROR: failed to set SAA register 0x04 " - "for input %i\n", input); - - if (0 != write_saa(p, 0x09, 0x80)) - SAY("ERROR: failed to set SAA register 0x09 " - "for input %i\n", input); - - SET(p, 0x0002, 0x0093); - break; - } - default: - SAY("ERROR: bad input: %i\n", input); - return -1; - } - - ir = read_stk(p, 0x00); - JOT(8, "STK register 0x00 has 0x%02X\n", ir); - ir = read_saa(p, 0x02); - JOT(8, "SAA register 0x02 has 0x%02X\n", ir); - - start_100(p); - - return 0; -} -/****************************************************************************/ -int set_resolution(struct usb_device *p, - u16 set0, u16 set1, u16 set2, u16 set3) -{ - u16 u0x0111, u0x0113, u0x0115, u0x0117; - - if (!p) - return -ENODEV; - u0x0111 = ((0xFF00 & set0) >> 8); - u0x0113 = ((0xFF00 & set1) >> 8); - u0x0115 = ((0xFF00 & set2) >> 8); - u0x0117 = ((0xFF00 & set3) >> 8); - - SET(p, 0x0110, (0x00FF & set0)); - SET(p, 0x0111, u0x0111); - SET(p, 0x0112, (0x00FF & set1)); - SET(p, 0x0113, u0x0113); - SET(p, 0x0114, (0x00FF & set2)); - SET(p, 0x0115, u0x0115); - SET(p, 0x0116, (0x00FF & set3)); - SET(p, 0x0117, u0x0117); - - return 0; -} -/****************************************************************************/ -int start_100(struct usb_device *p) -{ - u16 get116, get117, get0; - u8 igot116, igot117, igot; - - if (!p) - return -ENODEV; - GET(p, 0x0116, &igot116); - get116 = igot116; - GET(p, 0x0117, &igot117); - get117 = igot117; - SET(p, 0x0116, 0x0000); - SET(p, 0x0117, 0x0000); - - GET(p, 0x0100, &igot); - get0 = igot; - SET(p, 0x0100, (0x80 | get0)); - - SET(p, 0x0116, get116); - SET(p, 0x0117, get117); - - return 0; -} -/****************************************************************************/ -int stop_100(struct usb_device *p) -{ - u16 get0; - u8 igot; - - if (!p) - return -ENODEV; - GET(p, 0x0100, &igot); - get0 = igot; - SET(p, 0x0100, (0x7F & get0)); - return 0; -} -/****************************************************************************/ -/****************************************************************************/ -/*****************************************************************************/ -int easycap_wakeup_device(struct usb_device *pusb_device) -{ - if (!pusb_device) - return -ENODEV; - - return usb_control_msg(pusb_device, usb_sndctrlpipe(pusb_device, 0), - USB_REQ_SET_FEATURE, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - USB_DEVICE_REMOTE_WAKEUP, - 0, NULL, 0, 50000); -} -/*****************************************************************************/ -int easycap_audio_setup(struct easycap *peasycap) -{ - struct usb_device *pusb_device; - u8 buffer[1]; - int rc, id1, id2; -/*---------------------------------------------------------------------------*/ -/* - * IMPORTANT: - * THE MESSAGE OF TYPE (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) - * CAUSES MUTING IF THE VALUE 0x0100 IS SENT. - * TO ENABLE AUDIO THE VALUE 0x0200 MUST BE SENT. - */ -/*---------------------------------------------------------------------------*/ - const u8 request = 0x01; - const u8 requesttype = USB_DIR_OUT | - USB_TYPE_CLASS | - USB_RECIP_INTERFACE; - const u16 value_unmute = 0x0200; - const u16 index = 0x0301; - const u16 length = 1; - - if (!peasycap) - return -EFAULT; - - pusb_device = peasycap->pusb_device; - if (!pusb_device) - return -ENODEV; - - JOM(8, "%02X %02X %02X %02X %02X %02X %02X %02X\n", - requesttype, request, - (0x00FF & value_unmute), - (0xFF00 & value_unmute) >> 8, - (0x00FF & index), - (0xFF00 & index) >> 8, - (0x00FF & length), - (0xFF00 & length) >> 8); - - buffer[0] = 0x01; - - rc = usb_control_msg(pusb_device, usb_sndctrlpipe(pusb_device, 0), - request, requesttype, value_unmute, - index, &buffer[0], length, 50000); - - JOT(8, "0x%02X=buffer\n", buffer[0]); - if (rc != (int)length) { - switch (rc) { - case -EPIPE: - SAY("usb_control_msg returned -EPIPE\n"); - break; - default: - SAY("ERROR: usb_control_msg returned %i\n", rc); - break; - } - } -/*--------------------------------------------------------------------------*/ -/* - * REGISTER 500: SETTING VALUE TO 0x0094 RESETS AUDIO CONFIGURATION ??? - * REGISTER 506: ANALOGUE AUDIO ATTENTUATOR ??? - * FOR THE CVBS+S-VIDEO HARDWARE: - * SETTING VALUE TO 0x0000 GIVES QUIET SOUND. - * THE UPPER BYTE SEEMS TO HAVE NO EFFECT. - * FOR THE FOUR-CVBS HARDWARE: - * SETTING VALUE TO 0x0000 SEEMS TO HAVE NO EFFECT. - * REGISTER 507: ANALOGUE AUDIO PREAMPLIFIER ON/OFF ??? - * FOR THE CVBS-S-VIDEO HARDWARE: - * SETTING VALUE TO 0x0001 GIVES VERY LOUD, DISTORTED SOUND. - * THE UPPER BYTE SEEMS TO HAVE NO EFFECT. - */ -/*--------------------------------------------------------------------------*/ - SET(pusb_device, 0x0500, 0x0094); - SET(pusb_device, 0x0500, 0x008C); - SET(pusb_device, 0x0506, 0x0001); - SET(pusb_device, 0x0507, 0x0000); - id1 = read_vt(pusb_device, 0x007C); - id2 = read_vt(pusb_device, 0x007E); - SAM("0x%04X:0x%04X is audio vendor id\n", id1, id2); -/*---------------------------------------------------------------------------*/ -/* - * SELECT AUDIO SOURCE "LINE IN" AND SET THE AUDIO GAIN. -*/ -/*---------------------------------------------------------------------------*/ - if (easycap_audio_gainset(pusb_device, peasycap->gain)) - SAY("ERROR: audio_gainset() failed\n"); - check_vt(pusb_device); - return 0; -} -/*****************************************************************************/ -int check_vt(struct usb_device *pusb_device) -{ - int igot; - - if (!pusb_device) - return -ENODEV; - igot = read_vt(pusb_device, 0x0002); - if (0 > igot) - SAY("ERROR: failed to read VT1612A register 0x02\n"); - if (0x8000 & igot) - SAY("register 0x%02X muted\n", 0x02); - - igot = read_vt(pusb_device, 0x000E); - if (0 > igot) - SAY("ERROR: failed to read VT1612A register 0x0E\n"); - if (0x8000 & igot) - SAY("register 0x%02X muted\n", 0x0E); - - igot = read_vt(pusb_device, 0x0010); - if (0 > igot) - SAY("ERROR: failed to read VT1612A register 0x10\n"); - if (0x8000 & igot) - SAY("register 0x%02X muted\n", 0x10); - - igot = read_vt(pusb_device, 0x0012); - if (0 > igot) - SAY("ERROR: failed to read VT1612A register 0x12\n"); - if (0x8000 & igot) - SAY("register 0x%02X muted\n", 0x12); - - igot = read_vt(pusb_device, 0x0014); - if (0 > igot) - SAY("ERROR: failed to read VT1612A register 0x14\n"); - if (0x8000 & igot) - SAY("register 0x%02X muted\n", 0x14); - - igot = read_vt(pusb_device, 0x0016); - if (0 > igot) - SAY("ERROR: failed to read VT1612A register 0x16\n"); - if (0x8000 & igot) - SAY("register 0x%02X muted\n", 0x16); - - igot = read_vt(pusb_device, 0x0018); - if (0 > igot) - SAY("ERROR: failed to read VT1612A register 0x18\n"); - if (0x8000 & igot) - SAY("register 0x%02X muted\n", 0x18); - - igot = read_vt(pusb_device, 0x001C); - if (0 > igot) - SAY("ERROR: failed to read VT1612A register 0x1C\n"); - if (0x8000 & igot) - SAY("register 0x%02X muted\n", 0x1C); - - return 0; -} -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* NOTE: THIS DOES INCREASE THE VOLUME DRAMATICALLY: - * audio_gainset(pusb_device, 0x000F); - * - * loud dB register 0x10 dB register 0x1C dB total - * 0 -34.5 0 -34.5 - * .. .... . .... - * 15 10.5 0 10.5 - * 16 12.0 0 12.0 - * 17 12.0 1.5 13.5 - * .. .... .... .... - * 31 12.0 22.5 34.5 -*/ -/*---------------------------------------------------------------------------*/ -int easycap_audio_gainset(struct usb_device *pusb_device, s8 loud) -{ - int igot; - u8 tmp; - u16 mute; - - if (!pusb_device) - return -ENODEV; - if (0 > loud) - loud = 0; - if (31 < loud) - loud = 31; - - write_vt(pusb_device, 0x0002, 0x8000); -/*---------------------------------------------------------------------------*/ - igot = read_vt(pusb_device, 0x000E); - if (0 > igot) { - SAY("ERROR: failed to read VT1612A register 0x0E\n"); - mute = 0x0000; - } else - mute = 0x8000 & ((unsigned int)igot); - mute = 0; - - if (16 > loud) - tmp = 0x01 | (0x001F & (((u8)(15 - loud)) << 1)); - else - tmp = 0; - - JOT(8, "0x%04X=(mute|tmp) for VT1612A register 0x0E\n", mute | tmp); - write_vt(pusb_device, 0x000E, (mute | tmp)); -/*---------------------------------------------------------------------------*/ - igot = read_vt(pusb_device, 0x0010); - if (0 > igot) { - SAY("ERROR: failed to read VT1612A register 0x10\n"); - mute = 0x0000; - } else - mute = 0x8000 & ((unsigned int)igot); - mute = 0; - - JOT(8, "0x%04X=(mute|tmp|(tmp<<8)) for VT1612A register 0x10,...0x18\n", - mute | tmp | (tmp << 8)); - write_vt(pusb_device, 0x0010, (mute | tmp | (tmp << 8))); - write_vt(pusb_device, 0x0012, (mute | tmp | (tmp << 8))); - write_vt(pusb_device, 0x0014, (mute | tmp | (tmp << 8))); - write_vt(pusb_device, 0x0016, (mute | tmp | (tmp << 8))); - write_vt(pusb_device, 0x0018, (mute | tmp | (tmp << 8))); -/*---------------------------------------------------------------------------*/ - igot = read_vt(pusb_device, 0x001C); - if (0 > igot) { - SAY("ERROR: failed to read VT1612A register 0x1C\n"); - mute = 0x0000; - } else - mute = 0x8000 & ((unsigned int)igot); - mute = 0; - - if (16 <= loud) - tmp = 0x000F & (u8)(loud - 16); - else - tmp = 0; - - JOT(8, "0x%04X=(mute|tmp|(tmp<<8)) for VT1612A register 0x1C\n", - mute | tmp | (tmp << 8)); - write_vt(pusb_device, 0x001C, (mute | tmp | (tmp << 8))); - write_vt(pusb_device, 0x001A, 0x0404); - write_vt(pusb_device, 0x0002, 0x0000); - return 0; -} -/*****************************************************************************/ diff --git a/drivers/staging/media/easycap/easycap_main.c b/drivers/staging/media/easycap/easycap_main.c deleted file mode 100644 index 8269c77dbf7df5b2a9d860d304a06c806c88448a..0000000000000000000000000000000000000000 --- a/drivers/staging/media/easycap/easycap_main.c +++ /dev/null @@ -1,4239 +0,0 @@ -/****************************************************************************** -* * -* easycap_main.c * -* * -* Video driver for EasyCAP USB2.0 Video Capture Device DC60 * -* * -* * -******************************************************************************/ -/* - * - * Copyright (C) 2010 R.M. Thomas - * - * - * This is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The software is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this software; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ -/*****************************************************************************/ - -#include "easycap.h" -#include - - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("R.M. Thomas "); -MODULE_DESCRIPTION(EASYCAP_DRIVER_DESCRIPTION); -MODULE_VERSION(EASYCAP_DRIVER_VERSION); - -#ifdef CONFIG_EASYCAP_DEBUG -int easycap_debug; -module_param_named(debug, easycap_debug, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug level: 0(default),1,2,...,9"); -#endif /* CONFIG_EASYCAP_DEBUG */ - -bool easycap_readback; -module_param_named(readback, easycap_readback, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(readback, "read back written registers: (default false)"); - -static int easycap_bars = 1; -module_param_named(bars, easycap_bars, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(bars, - "Testcard bars on input signal failure: 0=>no, 1=>yes(default)"); - -static int easycap_gain = 16; -module_param_named(gain, easycap_gain, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(gain, "Audio gain: 0,...,16(default),...31"); - -static bool easycap_ntsc; -module_param_named(ntsc, easycap_ntsc, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(ntsc, "NTSC default encoding (default PAL)"); - - - -struct easycap_dongle easycapdc60_dongle[DONGLE_MANY]; -static struct mutex mutex_dongle; -static void easycap_complete(struct urb *purb); -static int reset(struct easycap *peasycap); -static int field2frame(struct easycap *peasycap); -static int redaub(struct easycap *peasycap, - void *pad, void *pex, int much, int more, - u8 mask, u8 margin, bool isuy); - -const char *strerror(int err) -{ -#define ERRNOSTR(_e) case _e: return # _e - switch (err) { - case 0: return "OK"; - ERRNOSTR(ENOMEM); - ERRNOSTR(ENODEV); - ERRNOSTR(ENXIO); - ERRNOSTR(EINVAL); - ERRNOSTR(EAGAIN); - ERRNOSTR(EFBIG); - ERRNOSTR(EPIPE); - ERRNOSTR(EMSGSIZE); - ERRNOSTR(ENOSPC); - ERRNOSTR(EINPROGRESS); - ERRNOSTR(ENOSR); - ERRNOSTR(EOVERFLOW); - ERRNOSTR(EPROTO); - ERRNOSTR(EILSEQ); - ERRNOSTR(ETIMEDOUT); - ERRNOSTR(EOPNOTSUPP); - ERRNOSTR(EPFNOSUPPORT); - ERRNOSTR(EAFNOSUPPORT); - ERRNOSTR(EADDRINUSE); - ERRNOSTR(EADDRNOTAVAIL); - ERRNOSTR(ENOBUFS); - ERRNOSTR(EISCONN); - ERRNOSTR(ENOTCONN); - ERRNOSTR(ESHUTDOWN); - ERRNOSTR(ENOENT); - ERRNOSTR(ECONNRESET); - ERRNOSTR(ETIME); - ERRNOSTR(ECOMM); - ERRNOSTR(EREMOTEIO); - ERRNOSTR(EXDEV); - ERRNOSTR(EPERM); - default: return "unknown"; - } - -#undef ERRNOSTR -} - -/****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* - * THIS ROUTINE DOES NOT DETECT DUPLICATE OCCURRENCES OF POINTER peasycap -*/ -/*---------------------------------------------------------------------------*/ -int easycap_isdongle(struct easycap *peasycap) -{ - int k; - if (!peasycap) - return -2; - for (k = 0; k < DONGLE_MANY; k++) { - if (easycapdc60_dongle[k].peasycap == peasycap) { - peasycap->isdongle = k; - return k; - } - } - return -1; -} -/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ -static int easycap_open(struct inode *inode, struct file *file) -{ - struct video_device *pvideo_device; - struct easycap *peasycap; - int rc; - - JOT(4, "\n"); - SAY("==========OPEN=========\n"); - - pvideo_device = video_devdata(file); - if (!pvideo_device) { - SAY("ERROR: pvideo_device is NULL.\n"); - return -EFAULT; - } - peasycap = (struct easycap *)video_get_drvdata(pvideo_device); - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - - JOM(16, "peasycap->pusb_device=%p\n", peasycap->pusb_device); - - file->private_data = peasycap; - rc = easycap_wakeup_device(peasycap->pusb_device); - if (rc) { - SAM("ERROR: wakeup_device() rc = %i\n", rc); - if (-ENODEV == rc) - SAM("ERROR: wakeup_device() returned -ENODEV\n"); - else - SAM("ERROR: wakeup_device() rc = %i\n", rc); - return rc; - } - JOM(8, "wakeup_device() OK\n"); - peasycap->input = 0; - rc = reset(peasycap); - if (rc) { - SAM("ERROR: reset() rc = %i\n", rc); - return -EFAULT; - } - return 0; -} - -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* - * RESET THE HARDWARE TO ITS REFERENCE STATE. - * - * THIS ROUTINE MAY BE CALLED REPEATEDLY IF easycap_complete() DETECTS - * A BAD VIDEO FRAME SIZE. -*/ -/*---------------------------------------------------------------------------*/ -static int reset(struct easycap *peasycap) -{ - struct easycap_standard const *peasycap_standard; - int fmtidx, input, rate; - bool ntsc, other; - int rc; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - input = peasycap->input; - -/*---------------------------------------------------------------------------*/ -/* - * IF THE SAA7113H HAS ALREADY ACQUIRED SYNC, USE ITS HARDWARE-DETECTED - * FIELD FREQUENCY TO DISTINGUISH NTSC FROM PAL. THIS IS ESSENTIAL FOR - * gstreamer AND OTHER USERSPACE PROGRAMS WHICH MAY NOT ATTEMPT TO INITIATE - * A SWITCH BETWEEN PAL AND NTSC. - * - * FUNCTION ready_saa() MAY REQUIRE A SUBSTANTIAL FRACTION OF A SECOND TO - * COMPLETE, SO SHOULD NOT BE INVOKED WITHOUT GOOD REASON. -*/ -/*---------------------------------------------------------------------------*/ - other = false; - JOM(8, "peasycap->ntsc=%d\n", peasycap->ntsc); - - rate = ready_saa(peasycap->pusb_device); - if (rate < 0) { - JOM(8, "not ready to capture after %i ms ...\n", PATIENCE); - ntsc = !peasycap->ntsc; - JOM(8, "... trying %s ..\n", ntsc ? "NTSC" : "PAL"); - rc = setup_stk(peasycap->pusb_device, ntsc); - if (rc) { - SAM("ERROR: setup_stk() rc = %i\n", rc); - return -EFAULT; - } - rc = setup_saa(peasycap->pusb_device, ntsc); - if (rc) { - SAM("ERROR: setup_saa() rc = %i\n", rc); - return -EFAULT; - } - - rate = ready_saa(peasycap->pusb_device); - if (rate < 0) { - JOM(8, "not ready to capture after %i ms\n", PATIENCE); - JOM(8, "... saa register 0x1F has 0x%02X\n", - read_saa(peasycap->pusb_device, 0x1F)); - ntsc = peasycap->ntsc; - } else { - JOM(8, "... success at second try: %i=rate\n", rate); - ntsc = (0 < (rate/2)) ? true : false ; - other = true; - } - } else { - JOM(8, "... success at first try: %i=rate\n", rate); - ntsc = (0 < rate/2) ? true : false ; - } - JOM(8, "ntsc=%d\n", ntsc); -/*---------------------------------------------------------------------------*/ - - rc = setup_stk(peasycap->pusb_device, ntsc); - if (rc) { - SAM("ERROR: setup_stk() rc = %i\n", rc); - return -EFAULT; - } - rc = setup_saa(peasycap->pusb_device, ntsc); - if (rc) { - SAM("ERROR: setup_saa() rc = %i\n", rc); - return -EFAULT; - } - - memset(peasycap->merit, 0, sizeof(peasycap->merit)); - - peasycap->video_eof = 0; - peasycap->audio_eof = 0; -/*---------------------------------------------------------------------------*/ -/* - * RESTORE INPUT AND FORCE REFRESH OF STANDARD, FORMAT, ETC. - * - * WHILE THIS PROCEDURE IS IN PROGRESS, SOME IOCTL COMMANDS WILL RETURN -EBUSY. -*/ -/*---------------------------------------------------------------------------*/ - peasycap->input = -8192; - peasycap->standard_offset = -8192; - fmtidx = ntsc ? NTSC_M : PAL_BGHIN; - if (other) { - peasycap_standard = &easycap_standard[0]; - while (0xFFFF != peasycap_standard->mask) { - if (fmtidx == peasycap_standard->v4l2_standard.index) { - peasycap->inputset[input].standard_offset = - peasycap_standard - easycap_standard; - break; - } - peasycap_standard++; - } - if (0xFFFF == peasycap_standard->mask) { - SAM("ERROR: standard not found\n"); - return -EINVAL; - } - JOM(8, "%i=peasycap->inputset[%i].standard_offset\n", - peasycap->inputset[input].standard_offset, input); - } - peasycap->format_offset = -8192; - peasycap->brightness = -8192; - peasycap->contrast = -8192; - peasycap->saturation = -8192; - peasycap->hue = -8192; - - rc = easycap_newinput(peasycap, input); - - if (rc) { - SAM("ERROR: newinput(.,%i) rc = %i\n", rc, input); - return -EFAULT; - } - JOM(4, "restored input, standard and format\n"); - - JOM(8, "true=peasycap->ntsc %d\n", peasycap->ntsc); - - if (0 > peasycap->input) { - SAM("MISTAKE: %i=peasycap->input\n", peasycap->input); - return -ENOENT; - } - if (0 > peasycap->standard_offset) { - SAM("MISTAKE: %i=peasycap->standard_offset\n", - peasycap->standard_offset); - return -ENOENT; - } - if (0 > peasycap->format_offset) { - SAM("MISTAKE: %i=peasycap->format_offset\n", - peasycap->format_offset); - return -ENOENT; - } - if (0 > peasycap->brightness) { - SAM("MISTAKE: %i=peasycap->brightness\n", - peasycap->brightness); - return -ENOENT; - } - if (0 > peasycap->contrast) { - SAM("MISTAKE: %i=peasycap->contrast\n", peasycap->contrast); - return -ENOENT; - } - if (0 > peasycap->saturation) { - SAM("MISTAKE: %i=peasycap->saturation\n", - peasycap->saturation); - return -ENOENT; - } - if (0 > peasycap->hue) { - SAM("MISTAKE: %i=peasycap->hue\n", peasycap->hue); - return -ENOENT; - } - return 0; -} -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* - * IF THE REQUESTED INPUT IS THE SAME AS THE EXISTING INPUT, DO NOTHING. - * OTHERWISE: - * KILL URBS, CLEAR FIELD AND FRAME BUFFERS AND RESET THEIR - * _read AND _fill POINTERS. - * SELECT THE NEW INPUT. - * ADJUST THE STANDARD, FORMAT, BRIGHTNESS, CONTRAST, SATURATION AND HUE - * ON THE BASIS OF INFORMATION IN STRUCTURE easycap.inputset[input]. - * RESUBMIT THE URBS IF STREAMING WAS ALREADY IN PROGRESS. - * - * NOTE: - * THIS ROUTINE MAY BE CALLED FREQUENTLY BY ZONEMINDER VIA IOCTL, - * SO IT SHOULD WRITE ONLY SPARINGLY TO THE LOGFILE. -*/ -/*---------------------------------------------------------------------------*/ -int easycap_newinput(struct easycap *peasycap, int input) -{ - int rc, k, m, mood, off; - int inputnow, video_idlenow, audio_idlenow; - bool resubmit; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - JOM(8, "%i=input sought\n", input); - - if (0 > input && INPUT_MANY <= input) - return -ENOENT; - inputnow = peasycap->input; - if (input == inputnow) - return 0; -/*---------------------------------------------------------------------------*/ -/* - * IF STREAMING IS IN PROGRESS THE URBS ARE KILLED AT THIS - * STAGE AND WILL BE RESUBMITTED PRIOR TO EXIT FROM THE ROUTINE. - * IF NO STREAMING IS IN PROGRESS NO URBS WILL BE SUBMITTED BY THE - * ROUTINE. -*/ -/*---------------------------------------------------------------------------*/ - video_idlenow = peasycap->video_idle; - audio_idlenow = peasycap->audio_idle; - - peasycap->video_idle = 1; - peasycap->audio_idle = 1; - if (peasycap->video_isoc_streaming) { - resubmit = true; - easycap_video_kill_urbs(peasycap); - } else { - resubmit = false; - } -/*---------------------------------------------------------------------------*/ - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -ENODEV; - } - rc = usb_set_interface(peasycap->pusb_device, - peasycap->video_interface, - peasycap->video_altsetting_off); - if (rc) { - SAM("ERROR: usb_set_interface() rc = %i\n", rc); - return -EFAULT; - } - rc = stop_100(peasycap->pusb_device); - if (rc) { - SAM("ERROR: stop_100() rc = %i\n", rc); - return -EFAULT; - } - for (k = 0; k < FIELD_BUFFER_MANY; k++) { - for (m = 0; m < FIELD_BUFFER_SIZE/PAGE_SIZE; m++) - memset(peasycap->field_buffer[k][m].pgo, 0, PAGE_SIZE); - } - for (k = 0; k < FRAME_BUFFER_MANY; k++) { - for (m = 0; m < FRAME_BUFFER_SIZE/PAGE_SIZE; m++) - memset(peasycap->frame_buffer[k][m].pgo, 0, PAGE_SIZE); - } - peasycap->field_page = 0; - peasycap->field_read = 0; - peasycap->field_fill = 0; - - peasycap->frame_read = 0; - peasycap->frame_fill = 0; - for (k = 0; k < peasycap->input; k++) { - (peasycap->frame_fill)++; - if (peasycap->frame_buffer_many <= peasycap->frame_fill) - peasycap->frame_fill = 0; - } - peasycap->input = input; - select_input(peasycap->pusb_device, peasycap->input, 9); -/*---------------------------------------------------------------------------*/ - if (input == peasycap->inputset[input].input) { - off = peasycap->inputset[input].standard_offset; - if (off != peasycap->standard_offset) { - rc = adjust_standard(peasycap, - easycap_standard[off].v4l2_standard.id); - if (rc) { - SAM("ERROR: adjust_standard() rc = %i\n", rc); - return -EFAULT; - } - JOM(8, "%i=peasycap->standard_offset\n", - peasycap->standard_offset); - } else { - JOM(8, "%i=peasycap->standard_offset unchanged\n", - peasycap->standard_offset); - } - off = peasycap->inputset[input].format_offset; - if (off != peasycap->format_offset) { - struct v4l2_pix_format *pix = - &easycap_format[off].v4l2_format.fmt.pix; - rc = adjust_format(peasycap, - pix->width, pix->height, - pix->pixelformat, pix->field, false); - if (0 > rc) { - SAM("ERROR: adjust_format() rc = %i\n", rc); - return -EFAULT; - } - JOM(8, "%i=peasycap->format_offset\n", - peasycap->format_offset); - } else { - JOM(8, "%i=peasycap->format_offset unchanged\n", - peasycap->format_offset); - } - mood = peasycap->inputset[input].brightness; - if (mood != peasycap->brightness) { - rc = adjust_brightness(peasycap, mood); - if (rc) { - SAM("ERROR: adjust_brightness rc = %i\n", rc); - return -EFAULT; - } - JOM(8, "%i=peasycap->brightness\n", - peasycap->brightness); - } - mood = peasycap->inputset[input].contrast; - if (mood != peasycap->contrast) { - rc = adjust_contrast(peasycap, mood); - if (rc) { - SAM("ERROR: adjust_contrast rc = %i\n", rc); - return -EFAULT; - } - JOM(8, "%i=peasycap->contrast\n", peasycap->contrast); - } - mood = peasycap->inputset[input].saturation; - if (mood != peasycap->saturation) { - rc = adjust_saturation(peasycap, mood); - if (rc) { - SAM("ERROR: adjust_saturation rc = %i\n", rc); - return -EFAULT; - } - JOM(8, "%i=peasycap->saturation\n", - peasycap->saturation); - } - mood = peasycap->inputset[input].hue; - if (mood != peasycap->hue) { - rc = adjust_hue(peasycap, mood); - if (rc) { - SAM("ERROR: adjust_hue rc = %i\n", rc); - return -EFAULT; - } - JOM(8, "%i=peasycap->hue\n", peasycap->hue); - } - } else { - SAM("MISTAKE: easycap.inputset[%i] unpopulated\n", input); - return -ENOENT; - } -/*---------------------------------------------------------------------------*/ - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -ENODEV; - } - rc = usb_set_interface(peasycap->pusb_device, - peasycap->video_interface, - peasycap->video_altsetting_on); - if (rc) { - SAM("ERROR: usb_set_interface() rc = %i\n", rc); - return -EFAULT; - } - rc = start_100(peasycap->pusb_device); - if (rc) { - SAM("ERROR: start_100() rc = %i\n", rc); - return -EFAULT; - } - if (resubmit) - easycap_video_submit_urbs(peasycap); - - peasycap->video_isoc_sequence = VIDEO_ISOC_BUFFER_MANY - 1; - peasycap->video_idle = video_idlenow; - peasycap->audio_idle = audio_idlenow; - peasycap->video_junk = 0; - - return 0; -} -/*****************************************************************************/ -int easycap_video_submit_urbs(struct easycap *peasycap) -{ - struct data_urb *pdata_urb; - struct urb *purb; - struct list_head *plist_head; - int j, isbad, nospc, m, rc; - int isbuf; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - - if (!peasycap->purb_video_head) { - SAY("ERROR: peasycap->urb_video_head uninitialized\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAY("ERROR: peasycap->pusb_device is NULL\n"); - return -ENODEV; - } - if (!peasycap->video_isoc_streaming) { - JOM(4, "submission of all video urbs\n"); - isbad = 0; nospc = 0; m = 0; - list_for_each(plist_head, (peasycap->purb_video_head)) { - pdata_urb = list_entry(plist_head, - struct data_urb, list_head); - if (pdata_urb && pdata_urb->purb) { - purb = pdata_urb->purb; - isbuf = pdata_urb->isbuf; - purb->interval = 1; - purb->dev = peasycap->pusb_device; - purb->pipe = - usb_rcvisocpipe(peasycap->pusb_device, - peasycap->video_endpointnumber); - purb->transfer_flags = URB_ISO_ASAP; - purb->transfer_buffer = - peasycap->video_isoc_buffer[isbuf].pgo; - purb->transfer_buffer_length = - peasycap->video_isoc_buffer_size; - purb->complete = easycap_complete; - purb->context = peasycap; - purb->start_frame = 0; - purb->number_of_packets = - peasycap->video_isoc_framesperdesc; - - for (j = 0; j < peasycap->video_isoc_framesperdesc; j++) { - purb->iso_frame_desc[j]. offset = - j * peasycap->video_isoc_maxframesize; - purb->iso_frame_desc[j]. length = - peasycap->video_isoc_maxframesize; - } - - rc = usb_submit_urb(purb, GFP_KERNEL); - if (rc) { - isbad++; - SAM("ERROR: usb_submit_urb() failed " - "for urb with rc:-%s\n", - strerror(rc)); - if (rc == -ENOSPC) - nospc++; - } else { - m++; - } - } else { - isbad++; - } - } - if (nospc) { - SAM("-ENOSPC=usb_submit_urb() for %i urbs\n", nospc); - SAM("..... possibly inadequate USB bandwidth\n"); - peasycap->video_eof = 1; - } - - if (isbad) - easycap_video_kill_urbs(peasycap); - else - peasycap->video_isoc_streaming = 1; - } else { - JOM(4, "already streaming video urbs\n"); - } - return 0; -} -/*****************************************************************************/ -int easycap_audio_kill_urbs(struct easycap *peasycap) -{ - int m; - struct list_head *plist_head; - struct data_urb *pdata_urb; - - if (!peasycap->audio_isoc_streaming) - return 0; - - if (!peasycap->purb_audio_head) { - SAM("ERROR: peasycap->purb_audio_head is NULL\n"); - return -EFAULT; - } - - peasycap->audio_isoc_streaming = 0; - m = 0; - list_for_each(plist_head, peasycap->purb_audio_head) { - pdata_urb = list_entry(plist_head, struct data_urb, list_head); - if (pdata_urb && pdata_urb->purb) { - usb_kill_urb(pdata_urb->purb); - m++; - } - } - - JOM(4, "%i audio urbs killed\n", m); - - return 0; -} -int easycap_video_kill_urbs(struct easycap *peasycap) -{ - int m; - struct list_head *plist_head; - struct data_urb *pdata_urb; - - if (!peasycap->video_isoc_streaming) - return 0; - - if (!peasycap->purb_video_head) { - SAM("ERROR: peasycap->purb_video_head is NULL\n"); - return -EFAULT; - } - - peasycap->video_isoc_streaming = 0; - JOM(4, "killing video urbs\n"); - m = 0; - list_for_each(plist_head, (peasycap->purb_video_head)) { - pdata_urb = list_entry(plist_head, struct data_urb, list_head); - if (pdata_urb && pdata_urb->purb) { - usb_kill_urb(pdata_urb->purb); - m++; - } - } - JOM(4, "%i video urbs killed\n", m); - - return 0; -} -/****************************************************************************/ -/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ -/*--------------------------------------------------------------------------*/ -static int easycap_open_noinode(struct file *file) -{ - return easycap_open(NULL, file); -} - -static int videodev_release(struct video_device *pvideo_device) -{ - struct easycap *peasycap; - - peasycap = video_get_drvdata(pvideo_device); - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - SAY("ending unsuccessfully\n"); - return -EFAULT; - } - if (easycap_video_kill_urbs(peasycap)) { - SAM("ERROR: easycap_video_kill_urbs() failed\n"); - return -EFAULT; - } - JOM(4, "ending successfully\n"); - return 0; -} - -/*****************************************************************************/ -static unsigned int easycap_poll(struct file *file, poll_table *wait) -{ - struct easycap *peasycap; - int rc, kd; - - JOT(8, "\n"); - - if (NULL == ((poll_table *)wait)) - JOT(8, "WARNING: poll table pointer is NULL ... continuing\n"); - if (!file) { - SAY("ERROR: file pointer is NULL\n"); - return -ERESTARTSYS; - } - peasycap = file->private_data; - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAY("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } -/*---------------------------------------------------------------------------*/ - kd = easycap_isdongle(peasycap); - if (0 <= kd && DONGLE_MANY > kd) { - if (mutex_lock_interruptible(&easycapdc60_dongle[kd].mutex_video)) { - SAY("ERROR: cannot down dongle[%i].mutex_video\n", kd); - return -ERESTARTSYS; - } - JOM(4, "locked dongle[%i].mutex_video\n", kd); - /* - * MEANWHILE, easycap_usb_disconnect() MAY HAVE FREED POINTER - * peasycap, IN WHICH CASE A REPEAT CALL TO isdongle() WILL FAIL. - * IF NECESSARY, BAIL OUT. - */ - if (kd != easycap_isdongle(peasycap)) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ERESTARTSYS; - } - if (!file) { - SAY("ERROR: file is NULL\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ERESTARTSYS; - } - peasycap = file->private_data; - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ERESTARTSYS; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ERESTARTSYS; - } - } else - /* - * IF easycap_usb_disconnect() HAS ALREADY FREED POINTER peasycap - * BEFORE THE ATTEMPT TO ACQUIRE THE SEMAPHORE, isdongle() WILL - * HAVE FAILED. BAIL OUT. - */ - return -ERESTARTSYS; -/*---------------------------------------------------------------------------*/ - rc = easycap_video_dqbuf(peasycap, 0); - peasycap->polled = 1; - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - if (rc) - return POLLERR; - - return POLLIN | POLLRDNORM; -} -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* - * IF mode IS NONZERO THIS ROUTINE RETURNS -EAGAIN RATHER THAN BLOCKING. - */ -/*---------------------------------------------------------------------------*/ -int easycap_video_dqbuf(struct easycap *peasycap, int mode) -{ - int input, ifield, miss, rc; - - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAY("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - ifield = 0; - JOM(8, "%i=ifield\n", ifield); -/*---------------------------------------------------------------------------*/ -/* - * CHECK FOR LOST INPUT SIGNAL. - * - * FOR THE FOUR-CVBS EasyCAP, THIS DOES NOT WORK AS EXPECTED. - * IF INPUT 0 IS PRESENT AND SYNC ACQUIRED, UNPLUGGING INPUT 4 DOES NOT - * RESULT IN SETTING BIT 0x40 ON REGISTER 0x1F, PRESUMABLY BECAUSE THERE - * IS FLYWHEELING ON INPUT 0. THE UPSHOT IS: - * - * INPUT 0 PLUGGED, INPUT 4 PLUGGED => SCREEN 0 OK, SCREEN 4 OK - * INPUT 0 PLUGGED, INPUT 4 UNPLUGGED => SCREEN 0 OK, SCREEN 4 BLACK - * INPUT 0 UNPLUGGED, INPUT 4 PLUGGED => SCREEN 0 BARS, SCREEN 4 OK - * INPUT 0 UNPLUGGED, INPUT 4 UNPLUGGED => SCREEN 0 BARS, SCREEN 4 BARS -*/ -/*---------------------------------------------------------------------------*/ - input = peasycap->input; - if (0 <= input && INPUT_MANY > input) { - rc = read_saa(peasycap->pusb_device, 0x1F); - if (0 <= rc) { - if (rc & 0x40) - peasycap->lost[input] += 1; - else - peasycap->lost[input] -= 2; - - if (0 > peasycap->lost[input]) - peasycap->lost[input] = 0; - else if ((2 * VIDEO_LOST_TOLERATE) < peasycap->lost[input]) - peasycap->lost[input] = (2 * VIDEO_LOST_TOLERATE); - } - } -/*---------------------------------------------------------------------------*/ -/* - * WAIT FOR FIELD ifield (0 => TOP, 1 => BOTTOM) - */ -/*---------------------------------------------------------------------------*/ - miss = 0; - while ((peasycap->field_read == peasycap->field_fill) || - (0 != (0xFF00 & peasycap->field_buffer - [peasycap->field_read][0].kount)) || - (ifield != (0x00FF & peasycap->field_buffer - [peasycap->field_read][0].kount))) { - if (mode) - return -EAGAIN; - - JOM(8, "first wait on wq_video, %i=field_read %i=field_fill\n", - peasycap->field_read, peasycap->field_fill); - - if (0 != (wait_event_interruptible(peasycap->wq_video, - (peasycap->video_idle || peasycap->video_eof || - ((peasycap->field_read != peasycap->field_fill) && - (0 == (0xFF00 & peasycap->field_buffer[peasycap->field_read][0].kount)) && - (ifield == (0x00FF & peasycap->field_buffer[peasycap->field_read][0].kount))))))) { - SAM("aborted by signal\n"); - return -EIO; - } - if (peasycap->video_idle) { - JOM(8, "%i=peasycap->video_idle returning -EAGAIN\n", - peasycap->video_idle); - return -EAGAIN; - } - if (peasycap->video_eof) { - JOM(8, "%i=peasycap->video_eof\n", peasycap->video_eof); - #if defined(PERSEVERE) - if (1 == peasycap->status) { - JOM(8, "persevering ...\n"); - peasycap->video_eof = 0; - peasycap->audio_eof = 0; - if (0 != reset(peasycap)) { - JOM(8, " ... failed returning -EIO\n"); - peasycap->video_eof = 1; - peasycap->audio_eof = 1; - easycap_video_kill_urbs(peasycap); - return -EIO; - } - peasycap->status = 0; - JOM(8, " ... OK returning -EAGAIN\n"); - return -EAGAIN; - } - #endif /*PERSEVERE*/ - peasycap->video_eof = 1; - peasycap->audio_eof = 1; - easycap_video_kill_urbs(peasycap); - JOM(8, "returning -EIO\n"); - return -EIO; - } - miss++; - } - JOM(8, "first awakening on wq_video after %i waits\n", miss); - - rc = field2frame(peasycap); - if (rc) - SAM("ERROR: field2frame() rc = %i\n", rc); -/*---------------------------------------------------------------------------*/ -/* - * WAIT FOR THE OTHER FIELD - */ -/*---------------------------------------------------------------------------*/ - if (ifield) - ifield = 0; - else - ifield = 1; - miss = 0; - while ((peasycap->field_read == peasycap->field_fill) || - (0 != (0xFF00 & peasycap->field_buffer[peasycap->field_read][0].kount)) || - (ifield != (0x00FF & peasycap->field_buffer[peasycap->field_read][0].kount))) { - if (mode) - return -EAGAIN; - - JOM(8, "second wait on wq_video %i=field_read %i=field_fill\n", - peasycap->field_read, peasycap->field_fill); - if (0 != (wait_event_interruptible(peasycap->wq_video, - (peasycap->video_idle || peasycap->video_eof || - ((peasycap->field_read != peasycap->field_fill) && - (0 == (0xFF00 & peasycap->field_buffer[peasycap->field_read][0].kount)) && - (ifield == (0x00FF & peasycap->field_buffer[peasycap->field_read][0].kount))))))) { - SAM("aborted by signal\n"); - return -EIO; - } - if (peasycap->video_idle) { - JOM(8, "%i=peasycap->video_idle returning -EAGAIN\n", - peasycap->video_idle); - return -EAGAIN; - } - if (peasycap->video_eof) { - JOM(8, "%i=peasycap->video_eof\n", peasycap->video_eof); -#if defined(PERSEVERE) - if (1 == peasycap->status) { - JOM(8, "persevering ...\n"); - peasycap->video_eof = 0; - peasycap->audio_eof = 0; - if (0 != reset(peasycap)) { - JOM(8, " ... failed returning -EIO\n"); - peasycap->video_eof = 1; - peasycap->audio_eof = 1; - easycap_video_kill_urbs(peasycap); - return -EIO; - } - peasycap->status = 0; - JOM(8, " ... OK ... returning -EAGAIN\n"); - return -EAGAIN; - } -#endif /*PERSEVERE*/ - peasycap->video_eof = 1; - peasycap->audio_eof = 1; - easycap_video_kill_urbs(peasycap); - JOM(8, "returning -EIO\n"); - return -EIO; - } - miss++; - } - JOM(8, "second awakening on wq_video after %i waits\n", miss); - - rc = field2frame(peasycap); - if (rc) - SAM("ERROR: field2frame() rc = %i\n", rc); -/*---------------------------------------------------------------------------*/ -/* - * WASTE THIS FRAME -*/ -/*---------------------------------------------------------------------------*/ - if (peasycap->skip) { - peasycap->skipped++; - if (peasycap->skip != peasycap->skipped) - return peasycap->skip - peasycap->skipped; - else - peasycap->skipped = 0; - } -/*---------------------------------------------------------------------------*/ - peasycap->frame_read = peasycap->frame_fill; - peasycap->queued[peasycap->frame_read] = 0; - peasycap->done[peasycap->frame_read] = V4L2_BUF_FLAG_DONE; - - peasycap->frame_fill++; - if (peasycap->frame_buffer_many <= peasycap->frame_fill) - peasycap->frame_fill = 0; - - if (0x01 & easycap_standard[peasycap->standard_offset].mask) - peasycap->frame_buffer[peasycap->frame_read][0].kount = - V4L2_FIELD_TOP; - else - peasycap->frame_buffer[peasycap->frame_read][0].kount = - V4L2_FIELD_BOTTOM; - - - JOM(8, "setting: %i=peasycap->frame_read\n", peasycap->frame_read); - JOM(8, "bumped to: %i=peasycap->frame_fill\n", peasycap->frame_fill); - - return 0; -} -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* - * BY DEFINITION, odd IS true FOR THE FIELD OCCUPYING LINES 1,3,5,...,479 - * odd IS false FOR THE FIELD OCCUPYING LINES 0,2,4,...,478 - * - * WHEN BOOLEAN PARAMETER decimatepixel IS true, ONLY THE FIELD FOR WHICH - * odd==false IS TRANSFERRED TO THE FRAME BUFFER. - * - */ -/*---------------------------------------------------------------------------*/ -static int field2frame(struct easycap *peasycap) -{ - - void *pex, *pad; - int kex, kad, mex, mad, rex, rad, rad2; - int c2, c3, w2, w3, cz, wz; - int rc, bytesperpixel, multiplier; - int much, more, over, rump, caches, input; - u8 mask, margin; - bool odd, isuy, decimatepixel, badinput; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - - badinput = false; - input = 0x07 & peasycap->field_buffer[peasycap->field_read][0].input; - - JOM(8, "===== parity %i, input 0x%02X, field buffer %i --> " - "frame buffer %i\n", - peasycap->field_buffer[peasycap->field_read][0].kount, - peasycap->field_buffer[peasycap->field_read][0].input, - peasycap->field_read, peasycap->frame_fill); - JOM(8, "===== %i=bytesperpixel\n", peasycap->bytesperpixel); - -/*---------------------------------------------------------------------------*/ -/* - * REJECT OR CLEAN BAD FIELDS - */ -/*---------------------------------------------------------------------------*/ - if (peasycap->field_read == peasycap->field_fill) { - SAM("ERROR: on entry, still filling field buffer %i\n", - peasycap->field_read); - return 0; - } -#ifdef EASYCAP_TESTCARD - easycap_testcard(peasycap, peasycap->field_read); -#else - if (0 <= input && INPUT_MANY > input) { - if (easycap_bars && VIDEO_LOST_TOLERATE <= peasycap->lost[input]) - easycap_testcard(peasycap, peasycap->field_read); - } -#endif /*EASYCAP_TESTCARD*/ -/*---------------------------------------------------------------------------*/ - - bytesperpixel = peasycap->bytesperpixel; - decimatepixel = peasycap->decimatepixel; - - if ((2 != bytesperpixel) && - (3 != bytesperpixel) && - (4 != bytesperpixel)) { - SAM("MISTAKE: %i=bytesperpixel\n", bytesperpixel); - return -EFAULT; - } - if (decimatepixel) - multiplier = 2; - else - multiplier = 1; - - w2 = 2 * multiplier * (peasycap->width); - w3 = bytesperpixel * multiplier * (peasycap->width); - wz = multiplier * (peasycap->height) * - multiplier * (peasycap->width); - - kex = peasycap->field_read; mex = 0; - kad = peasycap->frame_fill; mad = 0; - - pex = peasycap->field_buffer[kex][0].pgo; rex = PAGE_SIZE; - pad = peasycap->frame_buffer[kad][0].pgo; rad = PAGE_SIZE; - odd = !!(peasycap->field_buffer[kex][0].kount); - - if (odd && (!decimatepixel)) { - JOM(8, "initial skipping %4i bytes p.%4i\n", - w3/multiplier, mad); - pad += (w3 / multiplier); rad -= (w3 / multiplier); - } - isuy = true; - mask = 0; rump = 0; caches = 0; - - cz = 0; - while (cz < wz) { - /* - * PROCESS ONE LINE OF FRAME AT FULL RESOLUTION: - * READ w2 BYTES FROM FIELD BUFFER, - * WRITE w3 BYTES TO FRAME BUFFER - */ - if (!decimatepixel) { - over = w2; - do { - much = over; more = 0; - margin = 0; mask = 0x00; - if (rex < much) - much = rex; - rump = 0; - - if (much % 2) { - SAM("MISTAKE: much is odd\n"); - return -EFAULT; - } - - more = (bytesperpixel * - much) / 2; -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - if (1 < bytesperpixel) { - if (rad * 2 < much * bytesperpixel) { - /* - * INJUDICIOUS ALTERATION OF - * THIS STATEMENT BLOCK WILL - * CAUSE BREAKAGE. BEWARE. - */ - rad2 = rad + bytesperpixel - 1; - much = ((((2 * rad2)/bytesperpixel)/2) * 2); - rump = ((bytesperpixel * much) / 2) - rad; - more = rad; - } - mask = (u8)rump; - margin = 0; - if (much == rex) { - mask |= 0x04; - if ((mex + 1) < FIELD_BUFFER_SIZE / PAGE_SIZE) - margin = *((u8 *)(peasycap->field_buffer[kex][mex + 1].pgo)); - else - mask |= 0x08; - } - } else { - SAM("MISTAKE: %i=bytesperpixel\n", - bytesperpixel); - return -EFAULT; - } - if (rump) - caches++; - if (badinput) { - JOM(8, "ERROR: 0x%02X=->field_buffer" - "[%i][%i].input, " - "0x%02X=(0x08|->input)\n", - peasycap->field_buffer - [kex][mex].input, kex, mex, - (0x08|peasycap->input)); - } - rc = redaub(peasycap, pad, pex, much, more, - mask, margin, isuy); - if (0 > rc) { - SAM("ERROR: redaub() failed\n"); - return -EFAULT; - } - if (much % 4) - isuy = !isuy; - - over -= much; cz += much; - pex += much; rex -= much; - if (!rex) { - mex++; - pex = peasycap->field_buffer[kex][mex].pgo; - rex = PAGE_SIZE; - if (peasycap->field_buffer[kex][mex].input != (0x08|peasycap->input)) - badinput = true; - } - pad += more; - rad -= more; - if (!rad) { - mad++; - pad = peasycap->frame_buffer[kad][mad].pgo; - rad = PAGE_SIZE; - if (rump) { - pad += rump; - rad -= rump; - } - } - } while (over); -/*---------------------------------------------------------------------------*/ -/* - * SKIP w3 BYTES IN TARGET FRAME BUFFER, - * UNLESS IT IS THE LAST LINE OF AN ODD FRAME - */ -/*---------------------------------------------------------------------------*/ - if (!odd || (cz != wz)) { - over = w3; - do { - if (!rad) { - mad++; - pad = peasycap->frame_buffer - [kad][mad].pgo; - rad = PAGE_SIZE; - } - more = over; - if (rad < more) - more = rad; - over -= more; - pad += more; - rad -= more; - } while (over); - } -/*---------------------------------------------------------------------------*/ -/* - * PROCESS ONE LINE OF FRAME AT REDUCED RESOLUTION: - * ONLY IF false==odd, - * READ w2 BYTES FROM FIELD BUFFER, - * WRITE w3 / 2 BYTES TO FRAME BUFFER - */ -/*---------------------------------------------------------------------------*/ - } else if (!odd) { - over = w2; - do { - much = over; more = 0; margin = 0; mask = 0x00; - if (rex < much) - much = rex; - rump = 0; - - if (much % 2) { - SAM("MISTAKE: much is odd\n"); - return -EFAULT; - } - - more = (bytesperpixel * much) / 4; -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - if (1 < bytesperpixel) { - if (rad * 4 < much * bytesperpixel) { - /* - * INJUDICIOUS ALTERATION OF - * THIS STATEMENT BLOCK - * WILL CAUSE BREAKAGE. - * BEWARE. - */ - rad2 = rad + bytesperpixel - 1; - much = ((((2 * rad2) / bytesperpixel) / 2) * 4); - rump = ((bytesperpixel * much) / 4) - rad; - more = rad; - } - mask = (u8)rump; - margin = 0; - if (much == rex) { - mask |= 0x04; - if ((mex + 1) < FIELD_BUFFER_SIZE / PAGE_SIZE) - margin = *((u8 *)(peasycap->field_buffer[kex][mex + 1].pgo)); - else - mask |= 0x08; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - } else { - SAM("MISTAKE: %i=bytesperpixel\n", - bytesperpixel); - return -EFAULT; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - if (rump) - caches++; - - if (badinput) { - JOM(8, "ERROR: 0x%02X=->field_buffer" - "[%i][%i].input, " - "0x%02X=(0x08|->input)\n", - peasycap->field_buffer - [kex][mex].input, kex, mex, - (0x08|peasycap->input)); - } - rc = redaub(peasycap, pad, pex, much, more, - mask, margin, isuy); - if (0 > rc) { - SAM("ERROR: redaub() failed\n"); - return -EFAULT; - } - over -= much; cz += much; - pex += much; rex -= much; - if (!rex) { - mex++; - pex = peasycap->field_buffer[kex][mex].pgo; - rex = PAGE_SIZE; - if (peasycap->field_buffer[kex][mex].input != - (0x08|peasycap->input)) - badinput = true; - } - pad += more; - rad -= more; - if (!rad) { - mad++; - pad = peasycap->frame_buffer[kad][mad].pgo; - rad = PAGE_SIZE; - if (rump) { - pad += rump; - rad -= rump; - } - } - } while (over); -/*---------------------------------------------------------------------------*/ -/* - * OTHERWISE JUST - * READ w2 BYTES FROM FIELD BUFFER AND DISCARD THEM - */ -/*---------------------------------------------------------------------------*/ - } else { - over = w2; - do { - if (!rex) { - mex++; - pex = peasycap->field_buffer[kex][mex].pgo; - rex = PAGE_SIZE; - if (peasycap->field_buffer[kex][mex].input != - (0x08|peasycap->input)) { - JOM(8, "ERROR: 0x%02X=->field_buffer" - "[%i][%i].input, " - "0x%02X=(0x08|->input)\n", - peasycap->field_buffer - [kex][mex].input, kex, mex, - (0x08|peasycap->input)); - badinput = true; - } - } - much = over; - if (rex < much) - much = rex; - over -= much; - cz += much; - pex += much; - rex -= much; - } while (over); - } - } -/*---------------------------------------------------------------------------*/ -/* - * SANITY CHECKS - */ -/*---------------------------------------------------------------------------*/ - c2 = (mex + 1)*PAGE_SIZE - rex; - if (cz != c2) - SAM("ERROR: discrepancy %i in bytes read\n", c2 - cz); - c3 = (mad + 1)*PAGE_SIZE - rad; - - if (!decimatepixel) { - if (bytesperpixel * cz != c3) - SAM("ERROR: discrepancy %i in bytes written\n", - c3 - (bytesperpixel * cz)); - } else { - if (!odd) { - if (bytesperpixel * - cz != (4 * c3)) - SAM("ERROR: discrepancy %i in bytes written\n", - (2*c3)-(bytesperpixel * cz)); - } else { - if (0 != c3) - SAM("ERROR: discrepancy %i " - "in bytes written\n", c3); - } - } - if (rump) - SAM("WORRY: undischarged cache at end of line in frame buffer\n"); - - JOM(8, "===== field2frame(): %i bytes --> %i bytes (incl skip)\n", c2, c3); - JOM(8, "===== field2frame(): %i=mad %i=rad\n", mad, rad); - - if (odd) - JOM(8, "+++++ field2frame(): frame buffer %i is full\n", kad); - - if (peasycap->field_read == peasycap->field_fill) - SAM("WARNING: on exit, filling field buffer %i\n", - peasycap->field_read); - - if (caches) - JOM(8, "%i=caches\n", caches); - return 0; -} -/*---------------------------------------------------------------------------*/ -/* - * DECIMATION AND COLOURSPACE CONVERSION. - * - * THIS ROUTINE REQUIRES THAT ALL THE DATA TO BE READ RESIDES ON ONE PAGE - * AND THAT ALL THE DATA TO BE WRITTEN RESIDES ON ONE (DIFFERENT) PAGE. - * THE CALLING ROUTINE MUST ENSURE THAT THIS REQUIREMENT IS MET, AND MUST - * ALSO ENSURE THAT much IS EVEN. - * - * much BYTES ARE READ, AT LEAST (bytesperpixel * much)/2 BYTES ARE WRITTEN - * IF THERE IS NO DECIMATION, HALF THIS AMOUNT IF THERE IS DECIMATION. - * - * mask IS ZERO WHEN NO SPECIAL BEHAVIOUR REQUIRED. OTHERWISE IT IS SET THUS: - * 0x03 & mask = number of bytes to be written to cache instead of to - * frame buffer - * 0x04 & mask => use argument margin to set the chrominance for last pixel - * 0x08 & mask => do not set the chrominance for last pixel - * - * YUV to RGB CONVERSION IS (OR SHOULD BE) ITU-R BT 601. - * - * THERE IS A LOT OF CODE REPETITION IN THIS ROUTINE IN ORDER TO AVOID - * INEFFICIENT SWITCHING INSIDE INNER LOOPS. REARRANGING THE LOGIC TO - * REDUCE CODE LENGTH WILL GENERALLY IMPAIR RUNTIME PERFORMANCE. BEWARE. - */ -/*---------------------------------------------------------------------------*/ -static int redaub(struct easycap *peasycap, - void *pad, void *pex, int much, int more, - u8 mask, u8 margin, bool isuy) -{ - static s32 ay[256], bu[256], rv[256], gu[256], gv[256]; - u8 *pcache; - u8 r, g, b, y, u, v, c, *p2, *p3, *pz, *pr; - int bytesperpixel; - bool byteswaporder, decimatepixel, last; - int j, rump; - s32 tmp; - - if (much % 2) { - SAM("MISTAKE: much is odd\n"); - return -EFAULT; - } - bytesperpixel = peasycap->bytesperpixel; - byteswaporder = peasycap->byteswaporder; - decimatepixel = peasycap->decimatepixel; - -/*---------------------------------------------------------------------------*/ - if (!bu[255]) { - for (j = 0; j < 112; j++) { - tmp = (0xFF00 & (453 * j)) >> 8; - bu[j + 128] = tmp; bu[127 - j] = -tmp; - tmp = (0xFF00 & (359 * j)) >> 8; - rv[j + 128] = tmp; rv[127 - j] = -tmp; - tmp = (0xFF00 & (88 * j)) >> 8; - gu[j + 128] = tmp; gu[127 - j] = -tmp; - tmp = (0xFF00 & (183 * j)) >> 8; - gv[j + 128] = tmp; gv[127 - j] = -tmp; - } - for (j = 0; j < 16; j++) { - bu[j] = bu[16]; rv[j] = rv[16]; - gu[j] = gu[16]; gv[j] = gv[16]; - } - for (j = 240; j < 256; j++) { - bu[j] = bu[239]; rv[j] = rv[239]; - gu[j] = gu[239]; gv[j] = gv[239]; - } - for (j = 16; j < 236; j++) - ay[j] = j; - for (j = 0; j < 16; j++) - ay[j] = ay[16]; - for (j = 236; j < 256; j++) - ay[j] = ay[235]; - JOM(8, "lookup tables are prepared\n"); - } - pcache = peasycap->pcache; - if (!pcache) - pcache = &peasycap->cache[0]; -/*---------------------------------------------------------------------------*/ -/* - * TRANSFER CONTENTS OF CACHE TO THE FRAME BUFFER - */ -/*---------------------------------------------------------------------------*/ - if (!pcache) { - SAM("MISTAKE: pcache is NULL\n"); - return -EFAULT; - } - - if (pcache != &peasycap->cache[0]) - JOM(16, "cache has %i bytes\n", (int)(pcache - &peasycap->cache[0])); - p2 = &peasycap->cache[0]; - p3 = (u8 *)pad - (int)(pcache - &peasycap->cache[0]); - while (p2 < pcache) { - *p3++ = *p2; p2++; - } - pcache = &peasycap->cache[0]; - if (p3 != pad) { - SAM("MISTAKE: pointer misalignment\n"); - return -EFAULT; - } -/*---------------------------------------------------------------------------*/ - rump = (int)(0x03 & mask); - u = 0; v = 0; - p2 = (u8 *)pex; pz = p2 + much; pr = p3 + more; last = false; - p2++; - - if (isuy) - u = *(p2 - 1); - else - v = *(p2 - 1); - - if (rump) - JOM(16, "%4i=much %4i=more %i=rump\n", much, more, rump); - -/*---------------------------------------------------------------------------*/ - switch (bytesperpixel) { - case 2: { - if (!decimatepixel) { - memcpy(pad, pex, (size_t)much); - if (!byteswaporder) { - /* UYVY */ - return 0; - } else { - /* YUYV */ - p3 = (u8 *)pad; pz = p3 + much; - while (pz > p3) { - c = *p3; - *p3 = *(p3 + 1); - *(p3 + 1) = c; - p3 += 2; - } - return 0; - } - } else { - if (!byteswaporder) { - /* UYVY DECIMATED */ - p2 = (u8 *)pex; p3 = (u8 *)pad; pz = p2 + much; - while (pz > p2) { - *p3 = *p2; - *(p3 + 1) = *(p2 + 1); - *(p3 + 2) = *(p2 + 2); - *(p3 + 3) = *(p2 + 3); - p3 += 4; p2 += 8; - } - return 0; - } else { - /* YUYV DECIMATED */ - p2 = (u8 *)pex; p3 = (u8 *)pad; pz = p2 + much; - while (pz > p2) { - *p3 = *(p2 + 1); - *(p3 + 1) = *p2; - *(p3 + 2) = *(p2 + 3); - *(p3 + 3) = *(p2 + 2); - p3 += 4; p2 += 8; - } - return 0; - } - } - break; - } - case 3: - { - if (!decimatepixel) { - if (!byteswaporder) { - /* RGB */ - while (pz > p2) { - if (pr <= (p3 + bytesperpixel)) - last = true; - else - last = false; - y = *p2; - if (last && (0x0C & mask)) { - if (0x04 & mask) { - if (isuy) - v = margin; - else - u = margin; - } else - if (0x08 & mask) - ; - } else { - if (isuy) - v = *(p2 + 1); - else - u = *(p2 + 1); - } - - tmp = ay[(int)y] + rv[(int)v]; - r = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] - gu[(int)u] - gv[(int)v]; - g = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] + bu[(int)u]; - b = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - - if (last && rump) { - pcache = &peasycap->cache[0]; - switch (bytesperpixel - rump) { - case 1: { - *p3 = r; - *pcache++ = g; - *pcache++ = b; - break; - } - case 2: { - *p3 = r; - *(p3 + 1) = g; - *pcache++ = b; - break; - } - default: { - SAM("MISTAKE: %i=rump\n", - bytesperpixel - rump); - return -EFAULT; - } - } - } else { - *p3 = r; - *(p3 + 1) = g; - *(p3 + 2) = b; - } - p2 += 2; - if (isuy) - isuy = false; - else - isuy = true; - p3 += bytesperpixel; - } - return 0; - } else { - /* BGR */ - while (pz > p2) { - if (pr <= (p3 + bytesperpixel)) - last = true; - else - last = false; - y = *p2; - if (last && (0x0C & mask)) { - if (0x04 & mask) { - if (isuy) - v = margin; - else - u = margin; - } - else - if (0x08 & mask) - ; - } else { - if (isuy) - v = *(p2 + 1); - else - u = *(p2 + 1); - } - - tmp = ay[(int)y] + rv[(int)v]; - r = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] - gu[(int)u] - gv[(int)v]; - g = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] + bu[(int)u]; - b = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - - if (last && rump) { - pcache = &peasycap->cache[0]; - switch (bytesperpixel - rump) { - case 1: { - *p3 = b; - *pcache++ = g; - *pcache++ = r; - break; - } - case 2: { - *p3 = b; - *(p3 + 1) = g; - *pcache++ = r; - break; - } - default: { - SAM("MISTAKE: %i=rump\n", - bytesperpixel - rump); - return -EFAULT; - } - } - } else { - *p3 = b; - *(p3 + 1) = g; - *(p3 + 2) = r; - } - p2 += 2; - if (isuy) - isuy = false; - else - isuy = true; - p3 += bytesperpixel; - } - } - return 0; - } else { - if (!byteswaporder) { - /* RGB DECIMATED */ - while (pz > p2) { - if (pr <= (p3 + bytesperpixel)) - last = true; - else - last = false; - y = *p2; - if (last && (0x0C & mask)) { - if (0x04 & mask) { - if (isuy) - v = margin; - else - u = margin; - } else - if (0x08 & mask) - ; - } else { - if (isuy) - v = *(p2 + 1); - else - u = *(p2 + 1); - } - - if (isuy) { - tmp = ay[(int)y] + rv[(int)v]; - r = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] - gu[(int)u] - - gv[(int)v]; - g = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] + bu[(int)u]; - b = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - - if (last && rump) { - pcache = &peasycap->cache[0]; - switch (bytesperpixel - rump) { - case 1: { - *p3 = r; - *pcache++ = g; - *pcache++ = b; - break; - } - case 2: { - *p3 = r; - *(p3 + 1) = g; - *pcache++ = b; - break; - } - default: { - SAM("MISTAKE: " - "%i=rump\n", - bytesperpixel - rump); - return -EFAULT; - } - } - } else { - *p3 = r; - *(p3 + 1) = g; - *(p3 + 2) = b; - } - isuy = false; - p3 += bytesperpixel; - } else { - isuy = true; - } - p2 += 2; - } - return 0; - } else { - /* BGR DECIMATED */ - while (pz > p2) { - if (pr <= (p3 + bytesperpixel)) - last = true; - else - last = false; - y = *p2; - if (last && (0x0C & mask)) { - if (0x04 & mask) { - if (isuy) - v = margin; - else - u = margin; - } else - if (0x08 & mask) - ; - } else { - if (isuy) - v = *(p2 + 1); - else - u = *(p2 + 1); - } - - if (isuy) { - - tmp = ay[(int)y] + rv[(int)v]; - r = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] - gu[(int)u] - - gv[(int)v]; - g = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] + bu[(int)u]; - b = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - - if (last && rump) { - pcache = &peasycap->cache[0]; - switch (bytesperpixel - rump) { - case 1: { - *p3 = b; - *pcache++ = g; - *pcache++ = r; - break; - } - case 2: { - *p3 = b; - *(p3 + 1) = g; - *pcache++ = r; - break; - } - default: { - SAM("MISTAKE: " - "%i=rump\n", - bytesperpixel - rump); - return -EFAULT; - } - } - } else { - *p3 = b; - *(p3 + 1) = g; - *(p3 + 2) = r; - } - isuy = false; - p3 += bytesperpixel; - } - else - isuy = true; - p2 += 2; - } - return 0; - } - } - break; - } - case 4: - { - if (!decimatepixel) { - if (!byteswaporder) { - /* RGBA */ - while (pz > p2) { - if (pr <= (p3 + bytesperpixel)) - last = true; - else - last = false; - y = *p2; - if (last && (0x0C & mask)) { - if (0x04 & mask) { - if (isuy) - v = margin; - else - u = margin; - } else - if (0x08 & mask) - ; - } else { - if (isuy) - v = *(p2 + 1); - else - u = *(p2 + 1); - } - - tmp = ay[(int)y] + rv[(int)v]; - r = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] - gu[(int)u] - gv[(int)v]; - g = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] + bu[(int)u]; - b = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - - if (last && rump) { - pcache = &peasycap->cache[0]; - switch (bytesperpixel - rump) { - case 1: { - *p3 = r; - *pcache++ = g; - *pcache++ = b; - *pcache++ = 0; - break; - } - case 2: { - *p3 = r; - *(p3 + 1) = g; - *pcache++ = b; - *pcache++ = 0; - break; - } - case 3: { - *p3 = r; - *(p3 + 1) = g; - *(p3 + 2) = b; - *pcache++ = 0; - break; - } - default: { - SAM("MISTAKE: %i=rump\n", - bytesperpixel - rump); - return -EFAULT; - } - } - } else { - *p3 = r; - *(p3 + 1) = g; - *(p3 + 2) = b; - *(p3 + 3) = 0; - } - p2 += 2; - if (isuy) - isuy = false; - else - isuy = true; - p3 += bytesperpixel; - } - return 0; - } else { - /* - * BGRA - */ - while (pz > p2) { - if (pr <= (p3 + bytesperpixel)) - last = true; - else - last = false; - y = *p2; - if (last && (0x0C & mask)) { - if (0x04 & mask) { - if (isuy) - v = margin; - else - u = margin; - } else - if (0x08 & mask) - ; - } else { - if (isuy) - v = *(p2 + 1); - else - u = *(p2 + 1); - } - - tmp = ay[(int)y] + rv[(int)v]; - r = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] - gu[(int)u] - gv[(int)v]; - g = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] + bu[(int)u]; - b = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - - if (last && rump) { - pcache = &peasycap->cache[0]; - switch (bytesperpixel - rump) { - case 1: { - *p3 = b; - *pcache++ = g; - *pcache++ = r; - *pcache++ = 0; - break; - } - case 2: { - *p3 = b; - *(p3 + 1) = g; - *pcache++ = r; - *pcache++ = 0; - break; - } - case 3: { - *p3 = b; - *(p3 + 1) = g; - *(p3 + 2) = r; - *pcache++ = 0; - break; - } - default: - SAM("MISTAKE: %i=rump\n", - bytesperpixel - rump); - return -EFAULT; - } - } else { - *p3 = b; - *(p3 + 1) = g; - *(p3 + 2) = r; - *(p3 + 3) = 0; - } - p2 += 2; - if (isuy) - isuy = false; - else - isuy = true; - p3 += bytesperpixel; - } - } - return 0; - } else { - if (!byteswaporder) { - /* - * RGBA DECIMATED - */ - while (pz > p2) { - if (pr <= (p3 + bytesperpixel)) - last = true; - else - last = false; - y = *p2; - if (last && (0x0C & mask)) { - if (0x04 & mask) { - if (isuy) - v = margin; - else - u = margin; - } else - if (0x08 & mask) - ; - } else { - if (isuy) - v = *(p2 + 1); - else - u = *(p2 + 1); - } - - if (isuy) { - - tmp = ay[(int)y] + rv[(int)v]; - r = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] - gu[(int)u] - - gv[(int)v]; - g = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] + bu[(int)u]; - b = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - - if (last && rump) { - pcache = &peasycap->cache[0]; - switch (bytesperpixel - rump) { - case 1: { - *p3 = r; - *pcache++ = g; - *pcache++ = b; - *pcache++ = 0; - break; - } - case 2: { - *p3 = r; - *(p3 + 1) = g; - *pcache++ = b; - *pcache++ = 0; - break; - } - case 3: { - *p3 = r; - *(p3 + 1) = g; - *(p3 + 2) = b; - *pcache++ = 0; - break; - } - default: { - SAM("MISTAKE: " - "%i=rump\n", - bytesperpixel - - rump); - return -EFAULT; - } - } - } else { - *p3 = r; - *(p3 + 1) = g; - *(p3 + 2) = b; - *(p3 + 3) = 0; - } - isuy = false; - p3 += bytesperpixel; - } else - isuy = true; - p2 += 2; - } - return 0; - } else { - /* - * BGRA DECIMATED - */ - while (pz > p2) { - if (pr <= (p3 + bytesperpixel)) - last = true; - else - last = false; - y = *p2; - if (last && (0x0C & mask)) { - if (0x04 & mask) { - if (isuy) - v = margin; - else - u = margin; - } else - if (0x08 & mask) - ; - } else { - if (isuy) - v = *(p2 + 1); - else - u = *(p2 + 1); - } - - if (isuy) { - tmp = ay[(int)y] + rv[(int)v]; - r = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] - gu[(int)u] - - gv[(int)v]; - g = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - tmp = ay[(int)y] + bu[(int)u]; - b = (255 < tmp) ? 255 : ((0 > tmp) ? - 0 : (u8)tmp); - - if (last && rump) { - pcache = &peasycap->cache[0]; - switch (bytesperpixel - rump) { - case 1: { - *p3 = b; - *pcache++ = g; - *pcache++ = r; - *pcache++ = 0; - break; - } - case 2: { - *p3 = b; - *(p3 + 1) = g; - *pcache++ = r; - *pcache++ = 0; - break; - } - case 3: { - *p3 = b; - *(p3 + 1) = g; - *(p3 + 2) = r; - *pcache++ = 0; - break; - } - default: { - SAM("MISTAKE: " - "%i=rump\n", - bytesperpixel - rump); - return -EFAULT; - } - } - } else { - *p3 = b; - *(p3 + 1) = g; - *(p3 + 2) = r; - *(p3 + 3) = 0; - } - isuy = false; - p3 += bytesperpixel; - } else - isuy = true; - p2 += 2; - } - return 0; - } - } - break; - } - default: { - SAM("MISTAKE: %i=bytesperpixel\n", bytesperpixel); - return -EFAULT; - } - } - return 0; -} -/*****************************************************************************/ -/* - * SEE CORBET ET AL. "LINUX DEVICE DRIVERS", 3rd EDITION, PAGES 430-434 - */ -/*****************************************************************************/ -static void easycap_vma_open(struct vm_area_struct *pvma) -{ - struct easycap *peasycap; - - peasycap = pvma->vm_private_data; - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return; - } - peasycap->vma_many++; - JOT(8, "%i=peasycap->vma_many\n", peasycap->vma_many); - return; -} -/*****************************************************************************/ -static void easycap_vma_close(struct vm_area_struct *pvma) -{ - struct easycap *peasycap; - - peasycap = pvma->vm_private_data; - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return; - } - peasycap->vma_many--; - JOT(8, "%i=peasycap->vma_many\n", peasycap->vma_many); - return; -} -/*****************************************************************************/ -static int easycap_vma_fault(struct vm_area_struct *pvma, struct vm_fault *pvmf) -{ - int k, m, retcode; - void *pbuf; - struct page *page; - struct easycap *peasycap; - - retcode = VM_FAULT_NOPAGE; - - if (!pvma) { - SAY("pvma is NULL\n"); - return retcode; - } - if (!pvmf) { - SAY("pvmf is NULL\n"); - return retcode; - } - - k = (pvmf->pgoff) / (FRAME_BUFFER_SIZE/PAGE_SIZE); - m = (pvmf->pgoff) % (FRAME_BUFFER_SIZE/PAGE_SIZE); - - if (!m) - JOT(4, "%4i=k, %4i=m\n", k, m); - else - JOT(16, "%4i=k, %4i=m\n", k, m); - - if ((0 > k) || (FRAME_BUFFER_MANY <= k)) { - SAY("ERROR: buffer index %i out of range\n", k); - return retcode; - } - if ((0 > m) || (FRAME_BUFFER_SIZE/PAGE_SIZE <= m)) { - SAY("ERROR: page number %i out of range\n", m); - return retcode; - } - peasycap = pvma->vm_private_data; - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return retcode; - } -/*---------------------------------------------------------------------------*/ - pbuf = peasycap->frame_buffer[k][m].pgo; - if (!pbuf) { - SAM("ERROR: pbuf is NULL\n"); - return retcode; - } - page = virt_to_page(pbuf); - if (!page) { - SAM("ERROR: page is NULL\n"); - return retcode; - } - get_page(page); -/*---------------------------------------------------------------------------*/ - if (!page) { - SAM("ERROR: page is NULL after get_page(page)\n"); - } else { - pvmf->page = page; - retcode = VM_FAULT_MINOR; - } - return retcode; -} - -static const struct vm_operations_struct easycap_vm_ops = { - .open = easycap_vma_open, - .close = easycap_vma_close, - .fault = easycap_vma_fault, -}; - -static int easycap_mmap(struct file *file, struct vm_area_struct *pvma) -{ - JOT(8, "\n"); - - pvma->vm_ops = &easycap_vm_ops; - pvma->vm_flags |= VM_RESERVED; - if (file) - pvma->vm_private_data = file->private_data; - easycap_vma_open(pvma); - return 0; -} -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* - * ON COMPLETION OF A VIDEO URB ITS DATA IS COPIED TO THE FIELD BUFFERS - * PROVIDED peasycap->video_idle IS ZERO. REGARDLESS OF THIS BEING TRUE, - * IT IS RESUBMITTED PROVIDED peasycap->video_isoc_streaming IS NOT ZERO. - * - * THIS FUNCTION IS AN INTERRUPT SERVICE ROUTINE AND MUST NOT SLEEP. - * - * INFORMATION ABOUT THE VALIDITY OF THE CONTENTS OF THE FIELD BUFFER ARE - * STORED IN THE TWO-BYTE STATUS PARAMETER - * peasycap->field_buffer[peasycap->field_fill][0].kount - * NOTICE THAT THE INFORMATION IS STORED ONLY WITH PAGE 0 OF THE FIELD BUFFER. - * - * THE LOWER BYTE CONTAINS THE FIELD PARITY BYTE FURNISHED BY THE SAA7113H - * CHIP. - * - * THE UPPER BYTE IS ZERO IF NO PROBLEMS, OTHERWISE: - * 0 != (kount & 0x8000) => AT LEAST ONE URB COMPLETED WITH ERRORS - * 0 != (kount & 0x4000) => BUFFER HAS TOO MUCH DATA - * 0 != (kount & 0x2000) => BUFFER HAS NOT ENOUGH DATA - * 0 != (kount & 0x1000) => BUFFER HAS DATA FROM DISPARATE INPUTS - * 0 != (kount & 0x0400) => RESERVED - * 0 != (kount & 0x0200) => FIELD BUFFER NOT YET CHECKED - * 0 != (kount & 0x0100) => BUFFER HAS TWO EXTRA BYTES - WHY? - */ -/*---------------------------------------------------------------------------*/ -static void easycap_complete(struct urb *purb) -{ - struct easycap *peasycap; - struct data_buffer *pfield_buffer; - char errbuf[16]; - int i, more, much, leap, rc, last; - int videofieldamount; - unsigned int override, bad; - int framestatus, framelength, frameactual, frameoffset; - u8 *pu; - - if (!purb) { - SAY("ERROR: easycap_complete(): purb is NULL\n"); - return; - } - peasycap = purb->context; - if (!peasycap) { - SAY("ERROR: easycap_complete(): peasycap is NULL\n"); - return; - } - if (peasycap->video_eof) - return; - for (i = 0; i < VIDEO_ISOC_BUFFER_MANY; i++) - if (purb->transfer_buffer == peasycap->video_isoc_buffer[i].pgo) - break; - JOM(16, "%2i=urb\n", i); - last = peasycap->video_isoc_sequence; - if ((((VIDEO_ISOC_BUFFER_MANY - 1) == last) && (0 != i)) || - (((VIDEO_ISOC_BUFFER_MANY - 1) != last) && ((last + 1) != i))) { - JOM(16, "ERROR: out-of-order urbs %i,%i ... continuing\n", - last, i); - } - peasycap->video_isoc_sequence = i; - - if (peasycap->video_idle) { - JOM(16, "%i=video_idle %i=video_isoc_streaming\n", - peasycap->video_idle, peasycap->video_isoc_streaming); - if (peasycap->video_isoc_streaming) { - rc = usb_submit_urb(purb, GFP_ATOMIC); - if (rc) { - SAM("%s:%d ENOMEM\n", strerror(rc), rc); - if (-ENODEV != rc) - SAM("ERROR: while %i=video_idle, " - "usb_submit_urb() " - "failed with rc:\n", - peasycap->video_idle); - } - } - return; - } - override = 0; -/*---------------------------------------------------------------------------*/ - if (FIELD_BUFFER_MANY <= peasycap->field_fill) { - SAM("ERROR: bad peasycap->field_fill\n"); - return; - } - if (purb->status) { - if ((-ESHUTDOWN == purb->status) || (-ENOENT == purb->status)) { - JOM(8, "urb status -ESHUTDOWN or -ENOENT\n"); - return; - } - - (peasycap->field_buffer[peasycap->field_fill][0].kount) |= 0x8000 ; - SAM("ERROR: bad urb status -%s: %d\n", - strerror(purb->status), purb->status); -/*---------------------------------------------------------------------------*/ - } else { - for (i = 0; i < purb->number_of_packets; i++) { - if (0 != purb->iso_frame_desc[i].status) { - (peasycap->field_buffer - [peasycap->field_fill][0].kount) |= 0x8000 ; - /* FIXME: 1. missing '-' check boundaries */ - strcpy(&errbuf[0], - strerror(purb->iso_frame_desc[i].status)); - } - framestatus = purb->iso_frame_desc[i].status; - framelength = purb->iso_frame_desc[i].length; - frameactual = purb->iso_frame_desc[i].actual_length; - frameoffset = purb->iso_frame_desc[i].offset; - - JOM(16, "frame[%2i]:" - "%4i=status " - "%4i=actual " - "%4i=length " - "%5i=offset\n", - i, framestatus, frameactual, framelength, frameoffset); - if (!purb->iso_frame_desc[i].status) { - more = purb->iso_frame_desc[i].actual_length; - pfield_buffer = &peasycap->field_buffer - [peasycap->field_fill][peasycap->field_page]; - videofieldamount = (peasycap->field_page * - PAGE_SIZE) + - (int)(pfield_buffer->pto - pfield_buffer->pgo); - if (4 == more) - peasycap->video_mt++; - if (4 < more) { - if (peasycap->video_mt) { - JOM(8, "%4i empty video urb frames\n", - peasycap->video_mt); - peasycap->video_mt = 0; - } - if (FIELD_BUFFER_MANY <= peasycap->field_fill) { - SAM("ERROR: bad peasycap->field_fill\n"); - return; - } - if (FIELD_BUFFER_SIZE/PAGE_SIZE <= - peasycap->field_page) { - SAM("ERROR: bad peasycap->field_page\n"); - return; - } - pfield_buffer = &peasycap->field_buffer - [peasycap->field_fill][peasycap->field_page]; - pu = (u8 *)(purb->transfer_buffer + - purb->iso_frame_desc[i].offset); - if (0x80 & *pu) - leap = 8; - else - leap = 4; -/*--------------------------------------------------------------------------*/ -/* - * EIGHT-BYTE END-OF-VIDEOFIELD MARKER. - * NOTE: A SUCCESSION OF URB FRAMES FOLLOWING THIS ARE EMPTY, - * CORRESPONDING TO THE FIELD FLYBACK (VERTICAL BLANKING) PERIOD. - * - * PROVIDED THE FIELD BUFFER CONTAINS GOOD DATA AS INDICATED BY A ZERO UPPER - * BYTE OF - * peasycap->field_buffer[peasycap->field_fill][0].kount - * THE CONTENTS OF THE FIELD BUFFER ARE OFFERED TO dqbuf(), field_read IS - * UPDATED AND field_fill IS BUMPED. IF THE FIELD BUFFER CONTAINS BAD DATA - * NOTHING IS OFFERED TO dqbuf(). - * - * THE DECISION ON WHETHER THE PARITY OF THE OFFERED FIELD BUFFER IS RIGHT - * RESTS WITH dqbuf(). - */ -/*---------------------------------------------------------------------------*/ - if ((8 == more) || override) { - if (videofieldamount > - peasycap->videofieldamount) { - if (2 == videofieldamount - - peasycap-> - videofieldamount) { - (peasycap->field_buffer - [peasycap->field_fill] - [0].kount) |= 0x0100; - peasycap->video_junk += (1 + - VIDEO_JUNK_TOLERATE); - } else - (peasycap->field_buffer - [peasycap->field_fill] - [0].kount) |= 0x4000; - } else if (videofieldamount < - peasycap-> - videofieldamount) { - (peasycap->field_buffer - [peasycap->field_fill] - [0].kount) |= 0x2000; - } - bad = 0xFF00 & peasycap->field_buffer - [peasycap->field_fill] - [0].kount; - if (!bad) { - (peasycap->video_junk)--; - if (-VIDEO_JUNK_TOLERATE > - peasycap->video_junk) - peasycap->video_junk = - -VIDEO_JUNK_TOLERATE; - peasycap->field_read = - (peasycap-> - field_fill)++; - if (FIELD_BUFFER_MANY <= - peasycap-> - field_fill) - peasycap-> - field_fill = 0; - peasycap->field_page = 0; - pfield_buffer = &peasycap-> - field_buffer - [peasycap-> - field_fill] - [peasycap-> - field_page]; - pfield_buffer->pto = - pfield_buffer->pgo; - JOM(8, "bumped to: %i=" - "peasycap->" - "field_fill %i=" - "parity\n", - peasycap->field_fill, - 0x00FF & - pfield_buffer->kount); - JOM(8, "field buffer %i has " - "%i bytes fit to be " - "read\n", - peasycap->field_read, - videofieldamount); - JOM(8, "wakeup call to " - "wq_video, " - "%i=field_read " - "%i=field_fill " - "%i=parity\n", - peasycap->field_read, - peasycap->field_fill, - 0x00FF & peasycap-> - field_buffer - [peasycap-> - field_read][0].kount); - wake_up_interruptible - (&(peasycap-> - wq_video)); - } else { - peasycap->video_junk++; - if (bad & 0x0010) - peasycap->video_junk += - (1 + VIDEO_JUNK_TOLERATE/2); - JOM(8, "field buffer %i had %i " - "bytes, now discarded: " - "0x%04X\n", - peasycap->field_fill, - videofieldamount, - (0xFF00 & - peasycap->field_buffer - [peasycap->field_fill][0]. - kount)); - (peasycap->field_fill)++; - - if (FIELD_BUFFER_MANY <= - peasycap->field_fill) - peasycap->field_fill = 0; - peasycap->field_page = 0; - pfield_buffer = - &peasycap->field_buffer - [peasycap->field_fill] - [peasycap->field_page]; - pfield_buffer->pto = - pfield_buffer->pgo; - - JOM(8, "bumped to: %i=peasycap->" - "field_fill %i=parity\n", - peasycap->field_fill, - 0x00FF & pfield_buffer->kount); - } - if (8 == more) { - JOM(8, "end-of-field: received " - "parity byte 0x%02X\n", - (0xFF & *pu)); - if (0x40 & *pu) - pfield_buffer->kount = 0x0000; - else - pfield_buffer->kount = 0x0001; - pfield_buffer->input = 0x08 | - (0x07 & peasycap->input); - JOM(8, "end-of-field: 0x%02X=kount\n", - 0xFF & pfield_buffer->kount); - } - } -/*---------------------------------------------------------------------------*/ -/* - * COPY more BYTES FROM ISOC BUFFER TO FIELD BUFFER - */ -/*---------------------------------------------------------------------------*/ - pu += leap; - more -= leap; - - if (FIELD_BUFFER_MANY <= peasycap->field_fill) { - SAM("ERROR: bad peasycap->field_fill\n"); - return; - } - if (FIELD_BUFFER_SIZE/PAGE_SIZE <= peasycap->field_page) { - SAM("ERROR: bad peasycap->field_page\n"); - return; - } - pfield_buffer = &peasycap->field_buffer - [peasycap->field_fill][peasycap->field_page]; - while (more) { - pfield_buffer = &peasycap->field_buffer - [peasycap->field_fill] - [peasycap->field_page]; - if (PAGE_SIZE < (pfield_buffer->pto - - pfield_buffer->pgo)) { - SAM("ERROR: bad pfield_buffer->pto\n"); - return; - } - if (PAGE_SIZE == (pfield_buffer->pto - - pfield_buffer->pgo)) { - (peasycap->field_page)++; - if (FIELD_BUFFER_SIZE/PAGE_SIZE <= - peasycap->field_page) { - JOM(16, "wrapping peasycap->" - "field_page\n"); - peasycap->field_page = 0; - } - pfield_buffer = &peasycap-> - field_buffer - [peasycap->field_fill] - [peasycap->field_page]; - pfield_buffer->pto = pfield_buffer->pgo; - pfield_buffer->input = 0x08 | - (0x07 & peasycap->input); - if ((peasycap->field_buffer[peasycap-> - field_fill][0]). - input != - pfield_buffer->input) - (peasycap->field_buffer - [peasycap->field_fill] - [0]).kount |= 0x1000; - } - - much = PAGE_SIZE - - (int)(pfield_buffer->pto - - pfield_buffer->pgo); - - if (much > more) - much = more; - memcpy(pfield_buffer->pto, pu, much); - pu += much; - (pfield_buffer->pto) += much; - more -= much; - } - } - } - } - } -/*---------------------------------------------------------------------------*/ -/* - * RESUBMIT THIS URB, UNLESS A SEVERE PERSISTENT ERROR CONDITION EXISTS. - * - * IF THE WAIT QUEUES ARE NOT CLEARED IN RESPONSE TO AN ERROR CONDITION - * THE USERSPACE PROGRAM, E.G. mplayer, MAY HANG ON EXIT. BEWARE. - */ -/*---------------------------------------------------------------------------*/ - if (VIDEO_ISOC_BUFFER_MANY <= peasycap->video_junk) { - SAM("easycap driver shutting down on condition green\n"); - peasycap->status = 1; - peasycap->video_eof = 1; - peasycap->video_junk = 0; - wake_up_interruptible(&peasycap->wq_video); -#if !defined(PERSEVERE) - peasycap->audio_eof = 1; - wake_up_interruptible(&peasycap->wq_audio); -#endif /*PERSEVERE*/ - return; - } - if (peasycap->video_isoc_streaming) { - rc = usb_submit_urb(purb, GFP_ATOMIC); - if (rc) { - SAM("%s: %d\n", strerror(rc), rc); - if (-ENODEV != rc) - SAM("ERROR: while %i=video_idle, " - "usb_submit_urb() " - "failed with rc:\n", - peasycap->video_idle); - } - } - return; -} - -static struct easycap *alloc_easycap(u8 bInterfaceNumber) -{ - struct easycap *peasycap; - int i; - - peasycap = kzalloc(sizeof(struct easycap), GFP_KERNEL); - if (!peasycap) { - SAY("ERROR: Could not allocate peasycap\n"); - return NULL; - } - - if (mutex_lock_interruptible(&mutex_dongle)) { - SAY("ERROR: cannot lock mutex_dongle\n"); - kfree(peasycap); - return NULL; - } - - /* Find a free dongle in easycapdc60_dongle array */ - for (i = 0; i < DONGLE_MANY; i++) { - - if ((!easycapdc60_dongle[i].peasycap) && - (!mutex_is_locked(&easycapdc60_dongle[i].mutex_video)) && - (!mutex_is_locked(&easycapdc60_dongle[i].mutex_audio))) { - - easycapdc60_dongle[i].peasycap = peasycap; - peasycap->isdongle = i; - JOM(8, "intf[%i]: peasycap-->easycap" - "_dongle[%i].peasycap\n", - bInterfaceNumber, i); - break; - } - } - - mutex_unlock(&mutex_dongle); - - if (i >= DONGLE_MANY) { - SAM("ERROR: too many dongles\n"); - kfree(peasycap); - return NULL; - } - - return peasycap; -} - -static void free_easycap(struct easycap *peasycap) -{ - int allocation_video_urb; - int allocation_video_page; - int allocation_video_struct; - int allocation_audio_urb; - int allocation_audio_page; - int allocation_audio_struct; - int registered_video, registered_audio; - int kd; - - JOM(4, "freeing easycap structure.\n"); - allocation_video_urb = peasycap->allocation_video_urb; - allocation_video_page = peasycap->allocation_video_page; - allocation_video_struct = peasycap->allocation_video_struct; - registered_video = peasycap->registered_video; - allocation_audio_urb = peasycap->allocation_audio_urb; - allocation_audio_page = peasycap->allocation_audio_page; - allocation_audio_struct = peasycap->allocation_audio_struct; - registered_audio = peasycap->registered_audio; - - kd = easycap_isdongle(peasycap); - if (0 <= kd && DONGLE_MANY > kd) { - if (mutex_lock_interruptible(&mutex_dongle)) { - SAY("ERROR: cannot down mutex_dongle\n"); - } else { - JOM(4, "locked mutex_dongle\n"); - easycapdc60_dongle[kd].peasycap = NULL; - mutex_unlock(&mutex_dongle); - JOM(4, "unlocked mutex_dongle\n"); - JOT(4, " null-->dongle[%i].peasycap\n", kd); - allocation_video_struct -= sizeof(struct easycap); - } - } else { - SAY("ERROR: cannot purge dongle[].peasycap"); - } - - /* Free device structure */ - kfree(peasycap); - - SAY("%8i=video urbs after all deletions\n", allocation_video_urb); - SAY("%8i=video pages after all deletions\n", allocation_video_page); - SAY("%8i=video structs after all deletions\n", allocation_video_struct); - SAY("%8i=video devices after all deletions\n", registered_video); - SAY("%8i=audio urbs after all deletions\n", allocation_audio_urb); - SAY("%8i=audio pages after all deletions\n", allocation_audio_page); - SAY("%8i=audio structs after all deletions\n", allocation_audio_struct); - SAY("%8i=audio devices after all deletions\n", registered_audio); -} - -/* - * FIXME: Identify the appropriate pointer peasycap for interfaces - * 1 and 2. The address of peasycap->pusb_device is reluctantly used - * for this purpose. - */ -static struct easycap *get_easycap(struct usb_device *usbdev, - u8 bInterfaceNumber) -{ - int i; - struct easycap *peasycap; - - for (i = 0; i < DONGLE_MANY; i++) { - if (easycapdc60_dongle[i].peasycap->pusb_device == usbdev) { - peasycap = easycapdc60_dongle[i].peasycap; - JOT(8, "intf[%i]: dongle[%i].peasycap\n", - bInterfaceNumber, i); - break; - } - } - if (i >= DONGLE_MANY) { - SAY("ERROR: peasycap is unknown when probing interface %i\n", - bInterfaceNumber); - return NULL; - } - if (!peasycap) { - SAY("ERROR: peasycap is NULL when probing interface %i\n", - bInterfaceNumber); - return NULL; - } - - return peasycap; -} - -static void init_easycap(struct easycap *peasycap, - struct usb_device *usbdev, - struct usb_interface *intf, - u8 bInterfaceNumber) -{ - /* Save usb_device and usb_interface */ - peasycap->pusb_device = usbdev; - peasycap->pusb_interface = intf; - - peasycap->minor = -1; - kref_init(&peasycap->kref); - JOM(8, "intf[%i]: after kref_init(..._video) " - "%i=peasycap->kref.refcount.counter\n", - bInterfaceNumber, peasycap->kref.refcount.counter); - - /* module params */ - peasycap->gain = (s8)clamp(easycap_gain, 0, 31); - - init_waitqueue_head(&peasycap->wq_video); - init_waitqueue_head(&peasycap->wq_audio); - init_waitqueue_head(&peasycap->wq_trigger); - - peasycap->allocation_video_struct = sizeof(struct easycap); - - peasycap->microphone = false; - - peasycap->video_interface = -1; - peasycap->video_altsetting_on = -1; - peasycap->video_altsetting_off = -1; - peasycap->video_endpointnumber = -1; - peasycap->video_isoc_maxframesize = -1; - peasycap->video_isoc_buffer_size = -1; - - peasycap->audio_interface = -1; - peasycap->audio_altsetting_on = -1; - peasycap->audio_altsetting_off = -1; - peasycap->audio_endpointnumber = -1; - peasycap->audio_isoc_maxframesize = -1; - peasycap->audio_isoc_buffer_size = -1; - - peasycap->frame_buffer_many = FRAME_BUFFER_MANY; - - peasycap->ntsc = easycap_ntsc; - JOM(8, "defaulting initially to %s\n", - easycap_ntsc ? "NTSC" : "PAL"); -} - -static int populate_inputset(struct easycap *peasycap) -{ - struct inputset *inputset; - struct easycap_format *peasycap_format; - struct v4l2_pix_format *pix; - int m, i, k, mask, fmtidx; - s32 value; - - inputset = peasycap->inputset; - - fmtidx = peasycap->ntsc ? NTSC_M : PAL_BGHIN; - - m = 0; - mask = 0; - for (i = 0; easycap_standard[i].mask != 0xffff; i++) { - if (fmtidx == easycap_standard[i].v4l2_standard.index) { - m++; - for (k = 0; k < INPUT_MANY; k++) - inputset[k].standard_offset = i; - mask = easycap_standard[i].mask; - } - } - - if (m != 1) { - SAM("ERROR: inputset->standard_offset unpopulated, %i=m\n", m); - return -ENOENT; - } - - peasycap_format = &easycap_format[0]; - m = 0; - for (i = 0; peasycap_format->v4l2_format.fmt.pix.width; i++) { - pix = &peasycap_format->v4l2_format.fmt.pix; - if (((peasycap_format->mask & 0x0F) == (mask & 0x0F)) - && pix->field == V4L2_FIELD_NONE - && pix->pixelformat == V4L2_PIX_FMT_UYVY - && pix->width == 640 && pix->height == 480) { - m++; - for (k = 0; k < INPUT_MANY; k++) - inputset[k].format_offset = i; - break; - } - peasycap_format++; - } - if (m != 1) { - SAM("ERROR: inputset[]->format_offset unpopulated\n"); - return -ENOENT; - } - - m = 0; - for (i = 0; easycap_control[i].id != 0xffffffff; i++) { - value = easycap_control[i].default_value; - if (V4L2_CID_BRIGHTNESS == easycap_control[i].id) { - m++; - for (k = 0; k < INPUT_MANY; k++) - inputset[k].brightness = value; - } else if (V4L2_CID_CONTRAST == easycap_control[i].id) { - m++; - for (k = 0; k < INPUT_MANY; k++) - inputset[k].contrast = value; - } else if (V4L2_CID_SATURATION == easycap_control[i].id) { - m++; - for (k = 0; k < INPUT_MANY; k++) - inputset[k].saturation = value; - } else if (V4L2_CID_HUE == easycap_control[i].id) { - m++; - for (k = 0; k < INPUT_MANY; k++) - inputset[k].hue = value; - } - } - - if (m != 4) { - SAM("ERROR: inputset[]->brightness underpopulated\n"); - return -ENOENT; - } - - for (k = 0; k < INPUT_MANY; k++) - inputset[k].input = k; - JOM(4, "populated inputset[]\n"); - - return 0; -} - -static int alloc_framebuffers(struct easycap *peasycap) -{ - int i, j; - void *pbuf; - - JOM(4, "allocating %i frame buffers of size %li\n", - FRAME_BUFFER_MANY, (long int)FRAME_BUFFER_SIZE); - JOM(4, ".... each scattered over %li pages\n", - FRAME_BUFFER_SIZE/PAGE_SIZE); - - for (i = 0; i < FRAME_BUFFER_MANY; i++) { - for (j = 0; j < FRAME_BUFFER_SIZE/PAGE_SIZE; j++) { - if (peasycap->frame_buffer[i][j].pgo) - SAM("attempting to reallocate framebuffers\n"); - else { - pbuf = (void *)__get_free_page(GFP_KERNEL); - if (!pbuf) { - SAM("ERROR: Could not allocate " - "framebuffer %i page %i\n", i, j); - return -ENOMEM; - } - peasycap->allocation_video_page += 1; - peasycap->frame_buffer[i][j].pgo = pbuf; - } - peasycap->frame_buffer[i][j].pto = - peasycap->frame_buffer[i][j].pgo; - } - } - - peasycap->frame_fill = 0; - peasycap->frame_read = 0; - JOM(4, "allocation of frame buffers done: %i pages\n", i*j); - - return 0; -} - -static void free_framebuffers(struct easycap *peasycap) -{ - int k, m, gone; - - JOM(4, "freeing video frame buffers.\n"); - gone = 0; - for (k = 0; k < FRAME_BUFFER_MANY; k++) { - for (m = 0; m < FRAME_BUFFER_SIZE/PAGE_SIZE; m++) { - if (peasycap->frame_buffer[k][m].pgo) { - free_page((unsigned long) - peasycap->frame_buffer[k][m].pgo); - peasycap->frame_buffer[k][m].pgo = NULL; - peasycap->allocation_video_page -= 1; - gone++; - } - } - } - JOM(4, "video frame buffers freed: %i pages\n", gone); -} - -static int alloc_fieldbuffers(struct easycap *peasycap) -{ - int i, j; - void *pbuf; - - JOM(4, "allocating %i field buffers of size %li\n", - FIELD_BUFFER_MANY, (long int)FIELD_BUFFER_SIZE); - JOM(4, ".... each scattered over %li pages\n", - FIELD_BUFFER_SIZE/PAGE_SIZE); - - for (i = 0; i < FIELD_BUFFER_MANY; i++) { - for (j = 0; j < FIELD_BUFFER_SIZE/PAGE_SIZE; j++) { - if (peasycap->field_buffer[i][j].pgo) { - SAM("ERROR: attempting to reallocate " - "fieldbuffers\n"); - } else { - pbuf = (void *) __get_free_page(GFP_KERNEL); - if (!pbuf) { - SAM("ERROR: Could not allocate " - "fieldbuffer %i page %i\n", i, j); - return -ENOMEM; - } - peasycap->allocation_video_page += 1; - peasycap->field_buffer[i][j].pgo = pbuf; - } - peasycap->field_buffer[i][j].pto = - peasycap->field_buffer[i][j].pgo; - } - /* TODO: Hardcoded 0x0200 meaning? */ - peasycap->field_buffer[i][0].kount = 0x0200; - } - peasycap->field_fill = 0; - peasycap->field_page = 0; - peasycap->field_read = 0; - JOM(4, "allocation of field buffers done: %i pages\n", i*j); - - return 0; -} - -static void free_fieldbuffers(struct easycap *peasycap) -{ - int k, m, gone; - - JOM(4, "freeing video field buffers.\n"); - gone = 0; - for (k = 0; k < FIELD_BUFFER_MANY; k++) { - for (m = 0; m < FIELD_BUFFER_SIZE/PAGE_SIZE; m++) { - if (peasycap->field_buffer[k][m].pgo) { - free_page((unsigned long) - peasycap->field_buffer[k][m].pgo); - peasycap->field_buffer[k][m].pgo = NULL; - peasycap->allocation_video_page -= 1; - gone++; - } - } - } - JOM(4, "video field buffers freed: %i pages\n", gone); -} - -static int alloc_isocbuffers(struct easycap *peasycap) -{ - int i; - void *pbuf; - - JOM(4, "allocating %i isoc video buffers of size %i\n", - VIDEO_ISOC_BUFFER_MANY, - peasycap->video_isoc_buffer_size); - JOM(4, ".... each occupying contiguous memory pages\n"); - - for (i = 0; i < VIDEO_ISOC_BUFFER_MANY; i++) { - pbuf = (void *)__get_free_pages(GFP_KERNEL, - VIDEO_ISOC_ORDER); - if (!pbuf) { - SAM("ERROR: Could not allocate isoc " - "video buffer %i\n", i); - return -ENOMEM; - } - peasycap->allocation_video_page += BIT(VIDEO_ISOC_ORDER); - - peasycap->video_isoc_buffer[i].pgo = pbuf; - peasycap->video_isoc_buffer[i].pto = - pbuf + peasycap->video_isoc_buffer_size; - peasycap->video_isoc_buffer[i].kount = i; - } - JOM(4, "allocation of isoc video buffers done: %i pages\n", - i * (0x01 << VIDEO_ISOC_ORDER)); - return 0; -} - -static void free_isocbuffers(struct easycap *peasycap) -{ - int k, m; - - JOM(4, "freeing video isoc buffers.\n"); - m = 0; - for (k = 0; k < VIDEO_ISOC_BUFFER_MANY; k++) { - if (peasycap->video_isoc_buffer[k].pgo) { - free_pages((unsigned long) - peasycap->video_isoc_buffer[k].pgo, - VIDEO_ISOC_ORDER); - peasycap->video_isoc_buffer[k].pgo = NULL; - peasycap->allocation_video_page -= - BIT(VIDEO_ISOC_ORDER); - m++; - } - } - JOM(4, "isoc video buffers freed: %i pages\n", - m * (0x01 << VIDEO_ISOC_ORDER)); -} - -static int create_video_urbs(struct easycap *peasycap) -{ - struct urb *purb; - struct data_urb *pdata_urb; - int i, j; - - JOM(4, "allocating %i struct urb.\n", VIDEO_ISOC_BUFFER_MANY); - JOM(4, "using %i=peasycap->video_isoc_framesperdesc\n", - peasycap->video_isoc_framesperdesc); - JOM(4, "using %i=peasycap->video_isoc_maxframesize\n", - peasycap->video_isoc_maxframesize); - JOM(4, "using %i=peasycap->video_isoc_buffer_sizen", - peasycap->video_isoc_buffer_size); - - for (i = 0; i < VIDEO_ISOC_BUFFER_MANY; i++) { - purb = usb_alloc_urb(peasycap->video_isoc_framesperdesc, - GFP_KERNEL); - if (!purb) { - SAM("ERROR: usb_alloc_urb returned NULL for buffer " - "%i\n", i); - return -ENOMEM; - } - - peasycap->allocation_video_urb += 1; - pdata_urb = kzalloc(sizeof(struct data_urb), GFP_KERNEL); - if (!pdata_urb) { - usb_free_urb(purb); - SAM("ERROR: Could not allocate struct data_urb.\n"); - return -ENOMEM; - } - - peasycap->allocation_video_struct += - sizeof(struct data_urb); - - pdata_urb->purb = purb; - pdata_urb->isbuf = i; - pdata_urb->length = 0; - list_add_tail(&(pdata_urb->list_head), - peasycap->purb_video_head); - - if (!i) { - JOM(4, "initializing video urbs thus:\n"); - JOM(4, " purb->interval = 1;\n"); - JOM(4, " purb->dev = peasycap->pusb_device;\n"); - JOM(4, " purb->pipe = usb_rcvisocpipe" - "(peasycap->pusb_device,%i);\n", - peasycap->video_endpointnumber); - JOM(4, " purb->transfer_flags = URB_ISO_ASAP;\n"); - JOM(4, " purb->transfer_buffer = peasycap->" - "video_isoc_buffer[.].pgo;\n"); - JOM(4, " purb->transfer_buffer_length = %i;\n", - peasycap->video_isoc_buffer_size); - JOM(4, " purb->complete = easycap_complete;\n"); - JOM(4, " purb->context = peasycap;\n"); - JOM(4, " purb->start_frame = 0;\n"); - JOM(4, " purb->number_of_packets = %i;\n", - peasycap->video_isoc_framesperdesc); - JOM(4, " for (j = 0; j < %i; j++)\n", - peasycap->video_isoc_framesperdesc); - JOM(4, " {\n"); - JOM(4, " purb->iso_frame_desc[j].offset = j*%i;\n", - peasycap->video_isoc_maxframesize); - JOM(4, " purb->iso_frame_desc[j].length = %i;\n", - peasycap->video_isoc_maxframesize); - JOM(4, " }\n"); - } - - purb->interval = 1; - purb->dev = peasycap->pusb_device; - purb->pipe = usb_rcvisocpipe(peasycap->pusb_device, - peasycap->video_endpointnumber); - - purb->transfer_flags = URB_ISO_ASAP; - purb->transfer_buffer = peasycap->video_isoc_buffer[i].pgo; - purb->transfer_buffer_length = - peasycap->video_isoc_buffer_size; - - purb->complete = easycap_complete; - purb->context = peasycap; - purb->start_frame = 0; - purb->number_of_packets = peasycap->video_isoc_framesperdesc; - - for (j = 0; j < peasycap->video_isoc_framesperdesc; j++) { - purb->iso_frame_desc[j].offset = - j * peasycap->video_isoc_maxframesize; - purb->iso_frame_desc[j].length = - peasycap->video_isoc_maxframesize; - } - } - JOM(4, "allocation of %i struct urb done.\n", i); - return 0; -} - -static void free_video_urbs(struct easycap *peasycap) -{ - struct list_head *plist_head, *plist_next; - struct data_urb *pdata_urb; - int m; - - if (peasycap->purb_video_head) { - m = 0; - list_for_each(plist_head, peasycap->purb_video_head) { - pdata_urb = list_entry(plist_head, - struct data_urb, list_head); - if (pdata_urb && pdata_urb->purb) { - usb_free_urb(pdata_urb->purb); - pdata_urb->purb = NULL; - peasycap->allocation_video_urb--; - m++; - } - } - - JOM(4, "%i video urbs freed\n", m); - JOM(4, "freeing video data_urb structures.\n"); - m = 0; - list_for_each_safe(plist_head, plist_next, - peasycap->purb_video_head) { - pdata_urb = list_entry(plist_head, - struct data_urb, list_head); - if (pdata_urb) { - peasycap->allocation_video_struct -= - sizeof(struct data_urb); - kfree(pdata_urb); - m++; - } - } - JOM(4, "%i video data_urb structures freed\n", m); - JOM(4, "setting peasycap->purb_video_head=NULL\n"); - peasycap->purb_video_head = NULL; - } -} - -static int alloc_audio_buffers(struct easycap *peasycap) -{ - void *pbuf; - int k; - - JOM(4, "allocating %i isoc audio buffers of size %i\n", - AUDIO_ISOC_BUFFER_MANY, - peasycap->audio_isoc_buffer_size); - JOM(4, ".... each occupying contiguous memory pages\n"); - - for (k = 0; k < AUDIO_ISOC_BUFFER_MANY; k++) { - pbuf = (void *)__get_free_pages(GFP_KERNEL, AUDIO_ISOC_ORDER); - if (!pbuf) { - SAM("ERROR: Could not allocate isoc audio buffer %i\n", - k); - return -ENOMEM; - } - peasycap->allocation_audio_page += BIT(AUDIO_ISOC_ORDER); - - peasycap->audio_isoc_buffer[k].pgo = pbuf; - peasycap->audio_isoc_buffer[k].pto = - pbuf + peasycap->audio_isoc_buffer_size; - peasycap->audio_isoc_buffer[k].kount = k; - } - - JOM(4, "allocation of isoc audio buffers done.\n"); - return 0; -} - -static void free_audio_buffers(struct easycap *peasycap) -{ - int k, m; - - JOM(4, "freeing audio isoc buffers.\n"); - m = 0; - for (k = 0; k < AUDIO_ISOC_BUFFER_MANY; k++) { - if (peasycap->audio_isoc_buffer[k].pgo) { - free_pages((unsigned long) - (peasycap->audio_isoc_buffer[k].pgo), - AUDIO_ISOC_ORDER); - peasycap->audio_isoc_buffer[k].pgo = NULL; - peasycap->allocation_audio_page -= - BIT(AUDIO_ISOC_ORDER); - m++; - } - } - JOM(4, "easyoss_delete(): isoc audio buffers freed: %i pages\n", - m * (0x01 << AUDIO_ISOC_ORDER)); -} - -static int create_audio_urbs(struct easycap *peasycap) -{ - struct urb *purb; - struct data_urb *pdata_urb; - int k, j; - - JOM(4, "allocating %i struct urb.\n", AUDIO_ISOC_BUFFER_MANY); - JOM(4, "using %i=peasycap->audio_isoc_framesperdesc\n", - peasycap->audio_isoc_framesperdesc); - JOM(4, "using %i=peasycap->audio_isoc_maxframesize\n", - peasycap->audio_isoc_maxframesize); - JOM(4, "using %i=peasycap->audio_isoc_buffer_size\n", - peasycap->audio_isoc_buffer_size); - - for (k = 0; k < AUDIO_ISOC_BUFFER_MANY; k++) { - purb = usb_alloc_urb(peasycap->audio_isoc_framesperdesc, - GFP_KERNEL); - if (!purb) { - SAM("ERROR: usb_alloc_urb returned NULL for buffer " - "%i\n", k); - return -ENOMEM; - } - peasycap->allocation_audio_urb += 1 ; - pdata_urb = kzalloc(sizeof(struct data_urb), GFP_KERNEL); - if (!pdata_urb) { - usb_free_urb(purb); - SAM("ERROR: Could not allocate struct data_urb.\n"); - return -ENOMEM; - } - peasycap->allocation_audio_struct += - sizeof(struct data_urb); - - pdata_urb->purb = purb; - pdata_urb->isbuf = k; - pdata_urb->length = 0; - list_add_tail(&(pdata_urb->list_head), - peasycap->purb_audio_head); - - if (!k) { - JOM(4, "initializing audio urbs thus:\n"); - JOM(4, " purb->interval = 1;\n"); - JOM(4, " purb->dev = peasycap->pusb_device;\n"); - JOM(4, " purb->pipe = usb_rcvisocpipe(peasycap->" - "pusb_device,%i);\n", - peasycap->audio_endpointnumber); - JOM(4, " purb->transfer_flags = URB_ISO_ASAP;\n"); - JOM(4, " purb->transfer_buffer = " - "peasycap->audio_isoc_buffer[.].pgo;\n"); - JOM(4, " purb->transfer_buffer_length = %i;\n", - peasycap->audio_isoc_buffer_size); - JOM(4, " purb->complete = easycap_alsa_complete;\n"); - JOM(4, " purb->context = peasycap;\n"); - JOM(4, " purb->start_frame = 0;\n"); - JOM(4, " purb->number_of_packets = %i;\n", - peasycap->audio_isoc_framesperdesc); - JOM(4, " for (j = 0; j < %i; j++)\n", - peasycap->audio_isoc_framesperdesc); - JOM(4, " {\n"); - JOM(4, " purb->iso_frame_desc[j].offset = j*%i;\n", - peasycap->audio_isoc_maxframesize); - JOM(4, " purb->iso_frame_desc[j].length = %i;\n", - peasycap->audio_isoc_maxframesize); - JOM(4, " }\n"); - } - - purb->interval = 1; - purb->dev = peasycap->pusb_device; - purb->pipe = usb_rcvisocpipe(peasycap->pusb_device, - peasycap->audio_endpointnumber); - purb->transfer_flags = URB_ISO_ASAP; - purb->transfer_buffer = peasycap->audio_isoc_buffer[k].pgo; - purb->transfer_buffer_length = - peasycap->audio_isoc_buffer_size; - purb->complete = easycap_alsa_complete; - purb->context = peasycap; - purb->start_frame = 0; - purb->number_of_packets = peasycap->audio_isoc_framesperdesc; - for (j = 0; j < peasycap->audio_isoc_framesperdesc; j++) { - purb->iso_frame_desc[j].offset = - j * peasycap->audio_isoc_maxframesize; - purb->iso_frame_desc[j].length = - peasycap->audio_isoc_maxframesize; - } - } - JOM(4, "allocation of %i struct urb done.\n", k); - return 0; -} - -static void free_audio_urbs(struct easycap *peasycap) -{ - struct list_head *plist_head, *plist_next; - struct data_urb *pdata_urb; - int m; - - if (peasycap->purb_audio_head) { - JOM(4, "freeing audio urbs\n"); - m = 0; - list_for_each(plist_head, (peasycap->purb_audio_head)) { - pdata_urb = list_entry(plist_head, - struct data_urb, list_head); - if (pdata_urb && pdata_urb->purb) { - usb_free_urb(pdata_urb->purb); - pdata_urb->purb = NULL; - peasycap->allocation_audio_urb--; - m++; - } - } - JOM(4, "%i audio urbs freed\n", m); - JOM(4, "freeing audio data_urb structures.\n"); - m = 0; - list_for_each_safe(plist_head, plist_next, - peasycap->purb_audio_head) { - pdata_urb = list_entry(plist_head, - struct data_urb, list_head); - if (pdata_urb) { - peasycap->allocation_audio_struct -= - sizeof(struct data_urb); - kfree(pdata_urb); - m++; - } - } - JOM(4, "%i audio data_urb structures freed\n", m); - JOM(4, "setting peasycap->purb_audio_head=NULL\n"); - peasycap->purb_audio_head = NULL; - } -} - -static void config_easycap(struct easycap *peasycap, - u8 bInterfaceNumber, - u8 bInterfaceClass, - u8 bInterfaceSubClass) -{ - if ((USB_CLASS_VIDEO == bInterfaceClass) || - (USB_CLASS_VENDOR_SPEC == bInterfaceClass)) { - if (-1 == peasycap->video_interface) { - peasycap->video_interface = bInterfaceNumber; - JOM(4, "setting peasycap->video_interface=%i\n", - peasycap->video_interface); - } else { - if (peasycap->video_interface != bInterfaceNumber) { - SAM("ERROR: attempting to reset " - "peasycap->video_interface\n"); - SAM("...... continuing with " - "%i=peasycap->video_interface\n", - peasycap->video_interface); - } - } - } else if ((USB_CLASS_AUDIO == bInterfaceClass) && - (USB_SUBCLASS_AUDIOSTREAMING == bInterfaceSubClass)) { - if (-1 == peasycap->audio_interface) { - peasycap->audio_interface = bInterfaceNumber; - JOM(4, "setting peasycap->audio_interface=%i\n", - peasycap->audio_interface); - } else { - if (peasycap->audio_interface != bInterfaceNumber) { - SAM("ERROR: attempting to reset " - "peasycap->audio_interface\n"); - SAM("...... continuing with " - "%i=peasycap->audio_interface\n", - peasycap->audio_interface); - } - } - } -} - -/* - * This function is called from within easycap_usb_disconnect() and is - * protected by semaphores set and cleared by easycap_usb_disconnect(). - * By this stage the device has already been physically unplugged, - * so peasycap->pusb_device is no longer valid. - */ -static void easycap_delete(struct kref *pkref) -{ - struct easycap *peasycap; - - peasycap = container_of(pkref, struct easycap, kref); - if (!peasycap) { - SAM("ERROR: peasycap is NULL: cannot perform deletions\n"); - return; - } - - /* Free video urbs */ - free_video_urbs(peasycap); - - /* Free video isoc buffers */ - free_isocbuffers(peasycap); - - /* Free video field buffers */ - free_fieldbuffers(peasycap); - - /* Free video frame buffers */ - free_framebuffers(peasycap); - - /* Free audio urbs */ - free_audio_urbs(peasycap); - - /* Free audio isoc buffers */ - free_audio_buffers(peasycap); - - free_easycap(peasycap); - - JOT(4, "ending.\n"); -} - -static const struct v4l2_file_operations v4l2_fops = { - .owner = THIS_MODULE, - .open = easycap_open_noinode, - .unlocked_ioctl = easycap_unlocked_ioctl, - .poll = easycap_poll, - .mmap = easycap_mmap, -}; - -static int easycap_register_video(struct easycap *peasycap) -{ - /* - * FIXME: This is believed to be harmless, - * but may well be unnecessary or wrong. - */ - peasycap->video_device.v4l2_dev = NULL; - - strcpy(&peasycap->video_device.name[0], "easycapdc60"); - peasycap->video_device.fops = &v4l2_fops; - peasycap->video_device.minor = -1; - peasycap->video_device.release = (void *)(&videodev_release); - - video_set_drvdata(&(peasycap->video_device), (void *)peasycap); - - if (0 != (video_register_device(&(peasycap->video_device), - VFL_TYPE_GRABBER, -1))) { - videodev_release(&(peasycap->video_device)); - return -ENODEV; - } - - peasycap->registered_video++; - - SAM("registered with videodev: %i=minor\n", - peasycap->video_device.minor); - peasycap->minor = peasycap->video_device.minor; - - return 0; -} - -/* - * When the device is plugged, this function is called three times, - * one for each interface. - */ -static int easycap_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *usbdev; - struct usb_host_interface *alt; - struct usb_endpoint_descriptor *ep; - struct usb_interface_descriptor *interface; - struct easycap *peasycap; - int i, j, rc; - u8 bInterfaceNumber; - u8 bInterfaceClass; - u8 bInterfaceSubClass; - int okalt[8], isokalt; - int okepn[8]; - int okmps[8]; - int maxpacketsize; - - usbdev = interface_to_usbdev(intf); - - alt = usb_altnum_to_altsetting(intf, 0); - if (!alt) { - SAY("ERROR: usb_host_interface not found\n"); - return -EFAULT; - } - - interface = &alt->desc; - if (!interface) { - SAY("ERROR: intf_descriptor is NULL\n"); - return -EFAULT; - } - - /* Get properties of probed interface */ - bInterfaceNumber = interface->bInterfaceNumber; - bInterfaceClass = interface->bInterfaceClass; - bInterfaceSubClass = interface->bInterfaceSubClass; - - JOT(4, "intf[%i]: num_altsetting=%i\n", - bInterfaceNumber, intf->num_altsetting); - JOT(4, "intf[%i]: cur_altsetting - altsetting=%li\n", - bInterfaceNumber, - (long int)(intf->cur_altsetting - intf->altsetting)); - JOT(4, "intf[%i]: bInterfaceClass=0x%02X bInterfaceSubClass=0x%02X\n", - bInterfaceNumber, bInterfaceClass, bInterfaceSubClass); - - /* - * A new struct easycap is always allocated when interface 0 is probed. - * It is not possible here to free any existing struct easycap. - * This should have been done by easycap_delete() when the device was - * physically unplugged. - * The allocated struct easycap is saved for later usage when - * interfaces 1 and 2 are probed. - */ - if (0 == bInterfaceNumber) { - /* - * Alloc structure and save it in a free slot in - * easycapdc60_dongle array - */ - peasycap = alloc_easycap(bInterfaceNumber); - if (!peasycap) - return -ENOMEM; - - /* Perform basic struct initialization */ - init_easycap(peasycap, usbdev, intf, bInterfaceNumber); - - /* Dynamically fill in the available formats */ - rc = easycap_video_fillin_formats(); - if (0 > rc) { - SAM("ERROR: fillin_formats() rc = %i\n", rc); - return -EFAULT; - } - JOM(4, "%i formats available\n", rc); - - /* Populate easycap.inputset[] */ - rc = populate_inputset(peasycap); - if (rc < 0) - return rc; - JOM(4, "finished initialization\n"); - } else { - peasycap = get_easycap(usbdev, bInterfaceNumber); - if (!peasycap) - return -ENODEV; - } - - config_easycap(peasycap, bInterfaceNumber, - bInterfaceClass, - bInterfaceSubClass); - - /* - * Investigate all altsettings. This is done in detail - * because USB device 05e1:0408 has disparate incarnations. - */ - isokalt = 0; - for (i = 0; i < intf->num_altsetting; i++) { - alt = usb_altnum_to_altsetting(intf, i); - if (!alt) { - SAM("ERROR: alt is NULL\n"); - return -EFAULT; - } - interface = &alt->desc; - if (!interface) { - SAM("ERROR: intf_descriptor is NULL\n"); - return -EFAULT; - } - - if (0 == interface->bNumEndpoints) - JOM(4, "intf[%i]alt[%i] has no endpoints\n", - bInterfaceNumber, i); - for (j = 0; j < interface->bNumEndpoints; j++) { - ep = &alt->endpoint[j].desc; - if (!ep) { - SAM("ERROR: ep is NULL.\n"); - SAM("...... skipping\n"); - continue; - } - - if (!usb_endpoint_is_isoc_in(ep)) { - JOM(4, "intf[%i]alt[%i]end[%i] is a %d endpoint\n", - bInterfaceNumber, - i, j, ep->bmAttributes); - if (usb_endpoint_dir_out(ep)) { - SAM("ERROR: OUT endpoint unexpected\n"); - SAM("...... continuing\n"); - } - continue; - } - switch (bInterfaceClass) { - case USB_CLASS_VIDEO: - case USB_CLASS_VENDOR_SPEC: { - if (ep->wMaxPacketSize) { - if (8 > isokalt) { - okalt[isokalt] = i; - JOM(4, - "%i=okalt[%i]\n", - okalt[isokalt], - isokalt); - okepn[isokalt] = - ep-> - bEndpointAddress & - 0x0F; - JOM(4, - "%i=okepn[%i]\n", - okepn[isokalt], - isokalt); - okmps[isokalt] = - le16_to_cpu(ep-> - wMaxPacketSize); - JOM(4, - "%i=okmps[%i]\n", - okmps[isokalt], - isokalt); - isokalt++; - } - } else { - if (-1 == peasycap-> - video_altsetting_off) { - peasycap-> - video_altsetting_off = - i; - JOM(4, "%i=video_" - "altsetting_off " - "<====\n", - peasycap-> - video_altsetting_off); - } else { - SAM("ERROR: peasycap" - "->video_altsetting_" - "off already set\n"); - SAM("...... " - "continuing with " - "%i=peasycap->video_" - "altsetting_off\n", - peasycap-> - video_altsetting_off); - } - } - break; - } - case USB_CLASS_AUDIO: { - if (bInterfaceSubClass != - USB_SUBCLASS_AUDIOSTREAMING) - break; - if (!peasycap) { - SAM("MISTAKE: " - "peasycap is NULL\n"); - return -EFAULT; - } - if (ep->wMaxPacketSize) { - if (8 > isokalt) { - okalt[isokalt] = i ; - JOM(4, - "%i=okalt[%i]\n", - okalt[isokalt], - isokalt); - okepn[isokalt] = - ep-> - bEndpointAddress & - 0x0F; - JOM(4, - "%i=okepn[%i]\n", - okepn[isokalt], - isokalt); - okmps[isokalt] = - le16_to_cpu(ep-> - wMaxPacketSize); - JOM(4, - "%i=okmps[%i]\n", - okmps[isokalt], - isokalt); - isokalt++; - } - } else { - if (-1 == peasycap-> - audio_altsetting_off) { - peasycap-> - audio_altsetting_off = - i; - JOM(4, "%i=audio_" - "altsetting_off " - "<====\n", - peasycap-> - audio_altsetting_off); - } else { - SAM("ERROR: peasycap" - "->audio_altsetting_" - "off already set\n"); - SAM("...... " - "continuing with " - "%i=peasycap->" - "audio_altsetting_" - "off\n", - peasycap-> - audio_altsetting_off); - } - } - break; - } - default: - break; - } - if (0 == ep->wMaxPacketSize) { - JOM(4, "intf[%i]alt[%i]end[%i] " - "has zero packet size\n", - bInterfaceNumber, i, j); - } - } - } - - /* Perform initialization of the probed interface */ - JOM(4, "initialization begins for interface %i\n", - interface->bInterfaceNumber); - switch (bInterfaceNumber) { - /* 0: Video interface */ - case 0: { - if (!peasycap) { - SAM("MISTAKE: peasycap is NULL\n"); - return -EFAULT; - } - if (!isokalt) { - SAM("ERROR: no viable video_altsetting_on\n"); - return -ENOENT; - } - peasycap->video_altsetting_on = okalt[isokalt - 1]; - JOM(4, "%i=video_altsetting_on <====\n", - peasycap->video_altsetting_on); - - /* Decide video streaming parameters */ - peasycap->video_endpointnumber = okepn[isokalt - 1]; - JOM(4, "%i=video_endpointnumber\n", peasycap->video_endpointnumber); - maxpacketsize = okmps[isokalt - 1]; - - peasycap->video_isoc_maxframesize = - min(maxpacketsize, USB_2_0_MAXPACKETSIZE); - if (0 >= peasycap->video_isoc_maxframesize) { - SAM("ERROR: bad video_isoc_maxframesize\n"); - SAM(" possibly because port is USB 1.1\n"); - return -ENOENT; - } - JOM(4, "%i=video_isoc_maxframesize\n", - peasycap->video_isoc_maxframesize); - - peasycap->video_isoc_framesperdesc = VIDEO_ISOC_FRAMESPERDESC; - JOM(4, "%i=video_isoc_framesperdesc\n", - peasycap->video_isoc_framesperdesc); - if (0 >= peasycap->video_isoc_framesperdesc) { - SAM("ERROR: bad video_isoc_framesperdesc\n"); - return -ENOENT; - } - peasycap->video_isoc_buffer_size = - peasycap->video_isoc_maxframesize * - peasycap->video_isoc_framesperdesc; - JOM(4, "%i=video_isoc_buffer_size\n", - peasycap->video_isoc_buffer_size); - if ((PAGE_SIZE << VIDEO_ISOC_ORDER) < - peasycap->video_isoc_buffer_size) { - SAM("MISTAKE: peasycap->video_isoc_buffer_size too big\n"); - return -EFAULT; - } - if (-1 == peasycap->video_interface) { - SAM("MISTAKE: video_interface is unset\n"); - return -EFAULT; - } - if (-1 == peasycap->video_altsetting_on) { - SAM("MISTAKE: video_altsetting_on is unset\n"); - return -EFAULT; - } - if (-1 == peasycap->video_altsetting_off) { - SAM("MISTAKE: video_interface_off is unset\n"); - return -EFAULT; - } - if (-1 == peasycap->video_endpointnumber) { - SAM("MISTAKE: video_endpointnumber is unset\n"); - return -EFAULT; - } - if (-1 == peasycap->video_isoc_maxframesize) { - SAM("MISTAKE: video_isoc_maxframesize is unset\n"); - return -EFAULT; - } - if (-1 == peasycap->video_isoc_buffer_size) { - SAM("MISTAKE: video_isoc_buffer_size is unset\n"); - return -EFAULT; - } - - /* - * Allocate memory for video buffers. - * Lists must be initialized first. - */ - INIT_LIST_HEAD(&(peasycap->urb_video_head)); - peasycap->purb_video_head = &(peasycap->urb_video_head); - - rc = alloc_framebuffers(peasycap); - if (rc < 0) - return rc; - - rc = alloc_fieldbuffers(peasycap); - if (rc < 0) - return rc; - - rc = alloc_isocbuffers(peasycap); - if (rc < 0) - return rc; - - /* Allocate and initialize video urbs */ - rc = create_video_urbs(peasycap); - if (rc < 0) - return rc; - - /* Save pointer peasycap in this interface */ - usb_set_intfdata(intf, peasycap); - - /* - * It is essential to initialize the hardware before, - * rather than after, the device is registered, - * because some udev rules triggers easycap_open() - * immediately after registration, causing a clash. - */ - rc = reset(peasycap); - if (rc) { - SAM("ERROR: reset() rc = %i\n", rc); - return -EFAULT; - } - - /* The video device can now be registered */ - if (v4l2_device_register(&intf->dev, &peasycap->v4l2_device)) { - SAM("v4l2_device_register() failed\n"); - return -ENODEV; - } - JOM(4, "registered device instance: %s\n", - peasycap->v4l2_device.name); - - rc = easycap_register_video(peasycap); - if (rc < 0) { - dev_err(&intf->dev, - "Not able to register with videodev\n"); - return -ENODEV; - } - break; - } - /* 1: Audio control */ - case 1: { - if (!peasycap) { - SAM("MISTAKE: peasycap is NULL\n"); - return -EFAULT; - } - /* Save pointer peasycap in this interface */ - usb_set_intfdata(intf, peasycap); - JOM(4, "no initialization required for interface %i\n", - interface->bInterfaceNumber); - break; - } - /* 2: Audio streaming */ - case 2: { - if (!peasycap) { - SAM("MISTAKE: peasycap is NULL\n"); - return -EFAULT; - } - if (!isokalt) { - SAM("ERROR: no viable audio_altsetting_on\n"); - return -ENOENT; - } - peasycap->audio_altsetting_on = okalt[isokalt - 1]; - JOM(4, "%i=audio_altsetting_on <====\n", - peasycap->audio_altsetting_on); - - peasycap->audio_endpointnumber = okepn[isokalt - 1]; - JOM(4, "%i=audio_endpointnumber\n", peasycap->audio_endpointnumber); - - peasycap->audio_isoc_maxframesize = okmps[isokalt - 1]; - JOM(4, "%i=audio_isoc_maxframesize\n", - peasycap->audio_isoc_maxframesize); - if (0 >= peasycap->audio_isoc_maxframesize) { - SAM("ERROR: bad audio_isoc_maxframesize\n"); - return -ENOENT; - } - if (9 == peasycap->audio_isoc_maxframesize) { - peasycap->ilk |= 0x02; - SAM("audio hardware is microphone\n"); - peasycap->microphone = true; - peasycap->audio_pages_per_fragment = - PAGES_PER_AUDIO_FRAGMENT; - } else if (256 == peasycap->audio_isoc_maxframesize) { - peasycap->ilk &= ~0x02; - SAM("audio hardware is AC'97\n"); - peasycap->microphone = false; - peasycap->audio_pages_per_fragment = - PAGES_PER_AUDIO_FRAGMENT; - } else { - SAM("hardware is unidentified:\n"); - SAM("%i=audio_isoc_maxframesize\n", - peasycap->audio_isoc_maxframesize); - return -ENOENT; - } - - peasycap->audio_bytes_per_fragment = - peasycap->audio_pages_per_fragment * PAGE_SIZE; - peasycap->audio_buffer_page_many = (AUDIO_FRAGMENT_MANY * - peasycap->audio_pages_per_fragment); - - JOM(4, "%6i=AUDIO_FRAGMENT_MANY\n", AUDIO_FRAGMENT_MANY); - JOM(4, "%6i=audio_pages_per_fragment\n", - peasycap->audio_pages_per_fragment); - JOM(4, "%6i=audio_bytes_per_fragment\n", - peasycap->audio_bytes_per_fragment); - JOM(4, "%6i=audio_buffer_page_many\n", - peasycap->audio_buffer_page_many); - - peasycap->audio_isoc_framesperdesc = AUDIO_ISOC_FRAMESPERDESC; - - JOM(4, "%i=audio_isoc_framesperdesc\n", - peasycap->audio_isoc_framesperdesc); - if (0 >= peasycap->audio_isoc_framesperdesc) { - SAM("ERROR: bad audio_isoc_framesperdesc\n"); - return -ENOENT; - } - - peasycap->audio_isoc_buffer_size = - peasycap->audio_isoc_maxframesize * - peasycap->audio_isoc_framesperdesc; - JOM(4, "%i=audio_isoc_buffer_size\n", - peasycap->audio_isoc_buffer_size); - if (AUDIO_ISOC_BUFFER_SIZE < peasycap->audio_isoc_buffer_size) { - SAM("MISTAKE: audio_isoc_buffer_size bigger " - "than %li=AUDIO_ISOC_BUFFER_SIZE\n", - AUDIO_ISOC_BUFFER_SIZE); - return -EFAULT; - } - if (-1 == peasycap->audio_interface) { - SAM("MISTAKE: audio_interface is unset\n"); - return -EFAULT; - } - if (-1 == peasycap->audio_altsetting_on) { - SAM("MISTAKE: audio_altsetting_on is unset\n"); - return -EFAULT; - } - if (-1 == peasycap->audio_altsetting_off) { - SAM("MISTAKE: audio_interface_off is unset\n"); - return -EFAULT; - } - if (-1 == peasycap->audio_endpointnumber) { - SAM("MISTAKE: audio_endpointnumber is unset\n"); - return -EFAULT; - } - if (-1 == peasycap->audio_isoc_maxframesize) { - SAM("MISTAKE: audio_isoc_maxframesize is unset\n"); - return -EFAULT; - } - if (-1 == peasycap->audio_isoc_buffer_size) { - SAM("MISTAKE: audio_isoc_buffer_size is unset\n"); - return -EFAULT; - } - - /* - * Allocate memory for audio buffers. - * Lists must be initialized first. - */ - INIT_LIST_HEAD(&(peasycap->urb_audio_head)); - peasycap->purb_audio_head = &(peasycap->urb_audio_head); - - alloc_audio_buffers(peasycap); - if (rc < 0) - return rc; - - /* Allocate and initialize urbs */ - rc = create_audio_urbs(peasycap); - if (rc < 0) - return rc; - - /* Save pointer peasycap in this interface */ - usb_set_intfdata(intf, peasycap); - - /* The audio device can now be registered */ - JOM(4, "initializing ALSA card\n"); - - rc = easycap_alsa_probe(peasycap); - if (rc) { - dev_err(&intf->dev, "easycap_alsa_probe() rc = %i\n", - rc); - return -ENODEV; - } - - - JOM(8, "kref_get() with %i=kref.refcount.counter\n", - peasycap->kref.refcount.counter); - kref_get(&peasycap->kref); - peasycap->registered_audio++; - break; - } - /* Interfaces other than 0,1,2 are unexpected */ - default: - JOM(4, "ERROR: unexpected interface %i\n", bInterfaceNumber); - return -EINVAL; - } - SAM("ends successfully for interface %i\n", bInterfaceNumber); - return 0; -} - -/* - * When this function is called the device has already been - * physically unplugged. - * Hence, peasycap->pusb_device is no longer valid. - * This function affects alsa. - */ -static void easycap_usb_disconnect(struct usb_interface *pusb_interface) -{ - struct usb_host_interface *pusb_host_interface; - struct usb_interface_descriptor *pusb_interface_descriptor; - struct easycap *peasycap; - int minor, kd; - u8 bInterfaceNumber; - - JOT(4, "\n"); - - pusb_host_interface = pusb_interface->cur_altsetting; - if (!pusb_host_interface) { - JOT(4, "ERROR: pusb_host_interface is NULL\n"); - return; - } - pusb_interface_descriptor = &(pusb_host_interface->desc); - if (!pusb_interface_descriptor) { - JOT(4, "ERROR: pusb_interface_descriptor is NULL\n"); - return; - } - bInterfaceNumber = pusb_interface_descriptor->bInterfaceNumber; - minor = pusb_interface->minor; - JOT(4, "intf[%i]: minor=%i\n", bInterfaceNumber, minor); - - /* There is nothing to do for Interface Number 1 */ - if (1 == bInterfaceNumber) - return; - - peasycap = usb_get_intfdata(pusb_interface); - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return; - } - - /* If the waitqueues are not cleared a deadlock is possible */ - peasycap->video_eof = 1; - peasycap->audio_eof = 1; - wake_up_interruptible(&(peasycap->wq_video)); - wake_up_interruptible(&(peasycap->wq_audio)); - - switch (bInterfaceNumber) { - case 0: - easycap_video_kill_urbs(peasycap); - break; - case 2: - easycap_audio_kill_urbs(peasycap); - break; - default: - break; - } - - /* - * Deregister - * This procedure will block until easycap_poll(), - * video and audio ioctl are all unlocked. - * If this is not done an oops can occur when an easycap - * is unplugged while the urbs are running. - */ - kd = easycap_isdongle(peasycap); - switch (bInterfaceNumber) { - case 0: { - if (0 <= kd && DONGLE_MANY > kd) { - wake_up_interruptible(&peasycap->wq_video); - JOM(4, "about to lock dongle[%i].mutex_video\n", kd); - if (mutex_lock_interruptible(&easycapdc60_dongle[kd]. - mutex_video)) { - SAY("ERROR: " - "cannot lock dongle[%i].mutex_video\n", kd); - return; - } - JOM(4, "locked dongle[%i].mutex_video\n", kd); - } else { - SAY("ERROR: %i=kd is bad: cannot lock dongle\n", kd); - } - if (!peasycap->v4l2_device.name[0]) { - SAM("ERROR: peasycap->v4l2_device.name is empty\n"); - if (0 <= kd && DONGLE_MANY > kd) - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return; - } - v4l2_device_disconnect(&peasycap->v4l2_device); - JOM(4, "v4l2_device_disconnect() OK\n"); - v4l2_device_unregister(&peasycap->v4l2_device); - JOM(4, "v4l2_device_unregister() OK\n"); - - video_unregister_device(&peasycap->video_device); - JOM(4, "intf[%i]: video_unregister_device() minor=%i\n", - bInterfaceNumber, minor); - peasycap->registered_video--; - - if (0 <= kd && DONGLE_MANY > kd) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - JOM(4, "unlocked dongle[%i].mutex_video\n", kd); - } - break; - } - case 2: { - if (0 <= kd && DONGLE_MANY > kd) { - wake_up_interruptible(&peasycap->wq_audio); - JOM(4, "about to lock dongle[%i].mutex_audio\n", kd); - if (mutex_lock_interruptible(&easycapdc60_dongle[kd]. - mutex_audio)) { - SAY("ERROR: " - "cannot lock dongle[%i].mutex_audio\n", kd); - return; - } - JOM(4, "locked dongle[%i].mutex_audio\n", kd); - } else - SAY("ERROR: %i=kd is bad: cannot lock dongle\n", kd); - if (0 != snd_card_free(peasycap->psnd_card)) { - SAY("ERROR: snd_card_free() failed\n"); - } else { - peasycap->psnd_card = NULL; - (peasycap->registered_audio)--; - } - if (0 <= kd && DONGLE_MANY > kd) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_audio); - JOM(4, "unlocked dongle[%i].mutex_audio\n", kd); - } - break; - } - default: - break; - } - - /* - * If no remaining references to peasycap, - * call easycap_delete. - * (Also when alsa has been in use) - */ - if (!peasycap->kref.refcount.counter) { - SAM("ERROR: peasycap->kref.refcount.counter is zero " - "so cannot call kref_put()\n"); - SAM("ending unsuccessfully: may cause memory leak\n"); - return; - } - if (0 <= kd && DONGLE_MANY > kd) { - JOM(4, "about to lock dongle[%i].mutex_video\n", kd); - if (mutex_lock_interruptible(&easycapdc60_dongle[kd].mutex_video)) { - SAY("ERROR: cannot lock dongle[%i].mutex_video\n", kd); - SAM("ending unsuccessfully: may cause memory leak\n"); - return; - } - JOM(4, "locked dongle[%i].mutex_video\n", kd); - JOM(4, "about to lock dongle[%i].mutex_audio\n", kd); - if (mutex_lock_interruptible(&easycapdc60_dongle[kd].mutex_audio)) { - SAY("ERROR: cannot lock dongle[%i].mutex_audio\n", kd); - mutex_unlock(&(easycapdc60_dongle[kd].mutex_video)); - JOM(4, "unlocked dongle[%i].mutex_video\n", kd); - SAM("ending unsuccessfully: may cause memory leak\n"); - return; - } - JOM(4, "locked dongle[%i].mutex_audio\n", kd); - } - JOM(4, "intf[%i]: %i=peasycap->kref.refcount.counter\n", - bInterfaceNumber, (int)peasycap->kref.refcount.counter); - kref_put(&peasycap->kref, easycap_delete); - JOT(4, "intf[%i]: kref_put() done.\n", bInterfaceNumber); - if (0 <= kd && DONGLE_MANY > kd) { - mutex_unlock(&(easycapdc60_dongle[kd].mutex_audio)); - JOT(4, "unlocked dongle[%i].mutex_audio\n", kd); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - JOT(4, "unlocked dongle[%i].mutex_video\n", kd); - } - JOM(4, "ends\n"); - return; -} - -/* Devices supported by this driver */ -static struct usb_device_id easycap_usb_device_id_table[] = { - {USB_DEVICE(USB_EASYCAP_VENDOR_ID, USB_EASYCAP_PRODUCT_ID)}, - { } -}; - -MODULE_DEVICE_TABLE(usb, easycap_usb_device_id_table); -static struct usb_driver easycap_usb_driver = { - .name = "easycap", - .id_table = easycap_usb_device_id_table, - .probe = easycap_usb_probe, - .disconnect = easycap_usb_disconnect, -}; - -static int __init easycap_module_init(void) -{ - int k, rc; - - printk(KERN_INFO "Easycap version: "EASYCAP_DRIVER_VERSION "\n"); - - JOT(4, "begins. %i=debug %i=bars %i=gain\n", - easycap_debug, easycap_bars, easycap_gain); - - mutex_init(&mutex_dongle); - for (k = 0; k < DONGLE_MANY; k++) { - easycapdc60_dongle[k].peasycap = NULL; - mutex_init(&easycapdc60_dongle[k].mutex_video); - mutex_init(&easycapdc60_dongle[k].mutex_audio); - } - rc = usb_register(&easycap_usb_driver); - if (rc) - printk(KERN_ERR "Easycap: usb_register failed rc=%d\n", rc); - - return rc; -} - -static void __exit easycap_module_exit(void) -{ - usb_deregister(&easycap_usb_driver); -} - -module_init(easycap_module_init); -module_exit(easycap_module_exit); diff --git a/drivers/staging/media/easycap/easycap_settings.c b/drivers/staging/media/easycap/easycap_settings.c deleted file mode 100644 index 3f5f5b3e5a359b94f5839cc1f5ff1cde9d59d9c0..0000000000000000000000000000000000000000 --- a/drivers/staging/media/easycap/easycap_settings.c +++ /dev/null @@ -1,696 +0,0 @@ -/****************************************************************************** -* * -* easycap_settings.c * -* * -******************************************************************************/ -/* - * - * Copyright (C) 2010 R.M. Thomas - * - * - * This is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The software is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this software; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ -/*****************************************************************************/ - -#include "easycap.h" - -/*---------------------------------------------------------------------------*/ -/* - * THE LEAST SIGNIFICANT BIT OF easycap_standard.mask HAS MEANING: - * 0 => 25 fps - * 1 => 30 fps - * - * THE MOST SIGNIFICANT BIT OF easycap_standard.mask HAS MEANING: - * 0 => full framerate - * 1 => 20% framerate - */ -/*---------------------------------------------------------------------------*/ -const struct easycap_standard easycap_standard[] = { - { - .mask = 0x00FF & PAL_BGHIN , - .v4l2_standard = { - .index = PAL_BGHIN, - .id = (V4L2_STD_PAL_B | - V4L2_STD_PAL_G | V4L2_STD_PAL_H | - V4L2_STD_PAL_I | V4L2_STD_PAL_N), - .name = "PAL_BGHIN", - .frameperiod = {1, 25}, - .framelines = 625, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x00FF & NTSC_N_443 , - .v4l2_standard = { - .index = NTSC_N_443, - .id = V4L2_STD_UNKNOWN, - .name = "NTSC_N_443", - .frameperiod = {1, 25}, - .framelines = 480, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x00FF & PAL_Nc , - .v4l2_standard = { - .index = PAL_Nc, - .id = V4L2_STD_PAL_Nc, - .name = "PAL_Nc", - .frameperiod = {1, 25}, - .framelines = 625, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x00FF & NTSC_N , - .v4l2_standard = { - .index = NTSC_N, - .id = V4L2_STD_UNKNOWN, - .name = "NTSC_N", - .frameperiod = {1, 25}, - .framelines = 525, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x00FF & SECAM , - .v4l2_standard = { - .index = SECAM, - .id = V4L2_STD_SECAM, - .name = "SECAM", - .frameperiod = {1, 25}, - .framelines = 625, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x00FF & NTSC_M , - .v4l2_standard = { - .index = NTSC_M, - .id = V4L2_STD_NTSC_M, - .name = "NTSC_M", - .frameperiod = {1, 30}, - .framelines = 525, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x00FF & NTSC_M_JP , - .v4l2_standard = { - .index = NTSC_M_JP, - .id = V4L2_STD_NTSC_M_JP, - .name = "NTSC_M_JP", - .frameperiod = {1, 30}, - .framelines = 525, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x00FF & PAL_60 , - .v4l2_standard = { - .index = PAL_60, - .id = V4L2_STD_PAL_60, - .name = "PAL_60", - .frameperiod = {1, 30}, - .framelines = 525, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x00FF & NTSC_443 , - .v4l2_standard = { - .index = NTSC_443, - .id = V4L2_STD_NTSC_443, - .name = "NTSC_443", - .frameperiod = {1, 30}, - .framelines = 525, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x00FF & PAL_M , - .v4l2_standard = { - .index = PAL_M, - .id = V4L2_STD_PAL_M, - .name = "PAL_M", - .frameperiod = {1, 30}, - .framelines = 525, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x8000 | (0x00FF & PAL_BGHIN_SLOW), - .v4l2_standard = { - .index = PAL_BGHIN_SLOW, - .id = (V4L2_STD_PAL_B | V4L2_STD_PAL_G | - V4L2_STD_PAL_H | - V4L2_STD_PAL_I | V4L2_STD_PAL_N | - (((v4l2_std_id)0x01) << 32)), - .name = "PAL_BGHIN_SLOW", - .frameperiod = {1, 5}, - .framelines = 625, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x8000 | (0x00FF & NTSC_N_443_SLOW), - .v4l2_standard = { - .index = NTSC_N_443_SLOW, - .id = (V4L2_STD_UNKNOWN | (((v4l2_std_id)0x11) << 32)), - .name = "NTSC_N_443_SLOW", - .frameperiod = {1, 5}, - .framelines = 480, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x8000 | (0x00FF & PAL_Nc_SLOW), - .v4l2_standard = { - .index = PAL_Nc_SLOW, - .id = (V4L2_STD_PAL_Nc | (((v4l2_std_id)0x01) << 32)), - .name = "PAL_Nc_SLOW", - .frameperiod = {1, 5}, - .framelines = 625, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x8000 | (0x00FF & NTSC_N_SLOW), - .v4l2_standard = { - .index = NTSC_N_SLOW, - .id = (V4L2_STD_UNKNOWN | (((v4l2_std_id)0x21) << 32)), - .name = "NTSC_N_SLOW", - .frameperiod = {1, 5}, - .framelines = 525, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x8000 | (0x00FF & SECAM_SLOW), - .v4l2_standard = { - .index = SECAM_SLOW, - .id = (V4L2_STD_SECAM | (((v4l2_std_id)0x01) << 32)), - .name = "SECAM_SLOW", - .frameperiod = {1, 5}, - .framelines = 625, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x8000 | (0x00FF & NTSC_M_SLOW), - .v4l2_standard = { - .index = NTSC_M_SLOW, - .id = (V4L2_STD_NTSC_M | (((v4l2_std_id)0x01) << 32)), - .name = "NTSC_M_SLOW", - .frameperiod = {1, 6}, - .framelines = 525, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x8000 | (0x00FF & NTSC_M_JP_SLOW), - .v4l2_standard = { - .index = NTSC_M_JP_SLOW, - .id = (V4L2_STD_NTSC_M_JP | - (((v4l2_std_id)0x01) << 32)), - .name = "NTSC_M_JP_SLOW", - .frameperiod = {1, 6}, - .framelines = 525, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x8000 | (0x00FF & PAL_60_SLOW), - .v4l2_standard = { - .index = PAL_60_SLOW, - .id = (V4L2_STD_PAL_60 | (((v4l2_std_id)0x01) << 32)), - .name = "PAL_60_SLOW", - .frameperiod = {1, 6}, - .framelines = 525, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x8000 | (0x00FF & NTSC_443_SLOW), - .v4l2_standard = { - .index = NTSC_443_SLOW, - .id = (V4L2_STD_NTSC_443 | (((v4l2_std_id)0x01) << 32)), - .name = "NTSC_443_SLOW", - .frameperiod = {1, 6}, - .framelines = 525, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0x8000 | (0x00FF & PAL_M_SLOW), - .v4l2_standard = { - .index = PAL_M_SLOW, - .id = (V4L2_STD_PAL_M | (((v4l2_std_id)0x01) << 32)), - .name = "PAL_M_SLOW", - .frameperiod = {1, 6}, - .framelines = 525, - .reserved = {0, 0, 0, 0} - } - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .mask = 0xFFFF - } -}; -/*---------------------------------------------------------------------------*/ -/* - * THE 16-BIT easycap_format.mask HAS MEANING: - * (least significant) BIT 0: 0 => PAL, 25 FPS; 1 => NTSC, 30 FPS - * BITS 2-4: RESERVED FOR DIFFERENTIATING STANDARDS - * BITS 5-7: NUMBER OF BYTES PER PIXEL - * BIT 8: 0 => NATIVE BYTE ORDER; 1 => SWAPPED - * BITS 9-10: RESERVED FOR OTHER BYTE PERMUTATIONS - * BIT 11: 0 => UNDECIMATED; 1 => DECIMATED - * BIT 12: 0 => OFFER FRAMES; 1 => OFFER FIELDS - * BIT 13: 0 => FULL FRAMERATE; 1 => REDUCED - * (most significant) BITS 14-15: RESERVED FOR OTHER FIELD/FRAME OPTIONS - * IT FOLLOWS THAT: - * bytesperpixel IS ((0x00E0 & easycap_format.mask) >> 5) - * byteswaporder IS true IF (0 != (0x0100 & easycap_format.mask)) - * - * decimatepixel IS true IF (0 != (0x0800 & easycap_format.mask)) - * - * offerfields IS true IF (0 != (0x1000 & easycap_format.mask)) - */ -/*---------------------------------------------------------------------------*/ - -struct easycap_format easycap_format[1 + SETTINGS_MANY]; - -int easycap_video_fillin_formats(void) -{ - const char *name1, *name2, *name3, *name4; - struct v4l2_format *fmt; - int i, j, k, m, n; - u32 width, height, pixelformat, bytesperline, sizeimage; - u16 mask1, mask2, mask3, mask4; - enum v4l2_field field; - enum v4l2_colorspace colorspace; - - for (i = 0, n = 0; i < STANDARD_MANY; i++) { - mask1 = 0x0000; - switch (i) { - case PAL_BGHIN: { - mask1 = 0x1F & PAL_BGHIN; - name1 = "PAL_BGHIN"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_BG; - break; - } - case SECAM: { - mask1 = 0x1F & SECAM; - name1 = "SECAM"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_BG; - break; - } - case PAL_Nc: { - mask1 = 0x1F & PAL_Nc; - name1 = "PAL_Nc"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_BG; - break; - } - case PAL_60: { - mask1 = 0x1F & PAL_60; - name1 = "PAL_60"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_BG; - break; - } - case PAL_M: { - mask1 = 0x1F & PAL_M; - name1 = "PAL_M"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_BG; - break; - } - case NTSC_M: { - mask1 = 0x1F & NTSC_M; - name1 = "NTSC_M"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_M; - break; - } - case NTSC_443: { - mask1 = 0x1F & NTSC_443; - name1 = "NTSC_443"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_M; - break; - } - case NTSC_M_JP: { - mask1 = 0x1F & NTSC_M_JP; - name1 = "NTSC_M_JP"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_M; - break; - } - case NTSC_N: { - mask1 = 0x1F & NTSC_M; - name1 = "NTSC_N"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_M; - break; - } - case NTSC_N_443: { - mask1 = 0x1F & NTSC_N_443; - name1 = "NTSC_N_443"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_M; - break; - } - case PAL_BGHIN_SLOW: { - mask1 = 0x001F & PAL_BGHIN_SLOW; - mask1 |= 0x0200; - name1 = "PAL_BGHIN_SLOW"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_BG; - break; - } - case SECAM_SLOW: { - mask1 = 0x001F & SECAM_SLOW; - mask1 |= 0x0200; - name1 = "SECAM_SLOW"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_BG; - break; - } - case PAL_Nc_SLOW: { - mask1 = 0x001F & PAL_Nc_SLOW; - mask1 |= 0x0200; - name1 = "PAL_Nc_SLOW"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_BG; - break; - } - case PAL_60_SLOW: { - mask1 = 0x001F & PAL_60_SLOW; - mask1 |= 0x0200; - name1 = "PAL_60_SLOW"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_BG; - break; - } - case PAL_M_SLOW: { - mask1 = 0x001F & PAL_M_SLOW; - mask1 |= 0x0200; - name1 = "PAL_M_SLOW"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_BG; - break; - } - case NTSC_M_SLOW: { - mask1 = 0x001F & NTSC_M_SLOW; - mask1 |= 0x0200; - name1 = "NTSC_M_SLOW"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_M; - break; - } - case NTSC_443_SLOW: { - mask1 = 0x001F & NTSC_443_SLOW; - mask1 |= 0x0200; - name1 = "NTSC_443_SLOW"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_M; - break; - } - case NTSC_M_JP_SLOW: { - mask1 = 0x001F & NTSC_M_JP_SLOW; - mask1 |= 0x0200; - name1 = "NTSC_M_JP_SLOW"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_M; - break; - } - case NTSC_N_SLOW: { - mask1 = 0x001F & NTSC_N_SLOW; - mask1 |= 0x0200; - name1 = "NTSC_N_SLOW"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_M; - break; - } - case NTSC_N_443_SLOW: { - mask1 = 0x001F & NTSC_N_443_SLOW; - mask1 |= 0x0200; - name1 = "NTSC_N_443_SLOW"; - colorspace = V4L2_COLORSPACE_470_SYSTEM_M; - break; - } - default: - return -1; - } - - for (j = 0; j < RESOLUTION_MANY; j++) { - mask2 = 0x0000; - switch (j) { - case AT_720x576: { - if (0x1 & mask1) - continue; - name2 = "_AT_720x576"; - width = 720; - height = 576; - break; - } - case AT_704x576: { - if (0x1 & mask1) - continue; - name2 = "_AT_704x576"; - width = 704; - height = 576; - break; - } - case AT_640x480: { - name2 = "_AT_640x480"; - width = 640; - height = 480; - break; - } - case AT_720x480: { - if (!(0x1 & mask1)) - continue; - name2 = "_AT_720x480"; - width = 720; - height = 480; - break; - } - case AT_360x288: { - if (0x1 & mask1) - continue; - name2 = "_AT_360x288"; - width = 360; - height = 288; - mask2 = 0x0800; - break; - } - case AT_320x240: { - name2 = "_AT_320x240"; - width = 320; - height = 240; - mask2 = 0x0800; - break; - } - case AT_360x240: { - if (!(0x1 & mask1)) - continue; - name2 = "_AT_360x240"; - width = 360; - height = 240; - mask2 = 0x0800; - break; - } - default: - return -2; - } - - for (k = 0; k < PIXELFORMAT_MANY; k++) { - mask3 = 0x0000; - switch (k) { - case FMT_UYVY: { - name3 = __stringify(FMT_UYVY); - pixelformat = V4L2_PIX_FMT_UYVY; - mask3 |= (0x02 << 5); - break; - } - case FMT_YUY2: { - name3 = __stringify(FMT_YUY2); - pixelformat = V4L2_PIX_FMT_YUYV; - mask3 |= (0x02 << 5); - mask3 |= 0x0100; - break; - } - case FMT_RGB24: { - name3 = __stringify(FMT_RGB24); - pixelformat = V4L2_PIX_FMT_RGB24; - mask3 |= (0x03 << 5); - break; - } - case FMT_RGB32: { - name3 = __stringify(FMT_RGB32); - pixelformat = V4L2_PIX_FMT_RGB32; - mask3 |= (0x04 << 5); - break; - } - case FMT_BGR24: { - name3 = __stringify(FMT_BGR24); - pixelformat = V4L2_PIX_FMT_BGR24; - mask3 |= (0x03 << 5); - mask3 |= 0x0100; - break; - } - case FMT_BGR32: { - name3 = __stringify(FMT_BGR32); - pixelformat = V4L2_PIX_FMT_BGR32; - mask3 |= (0x04 << 5); - mask3 |= 0x0100; - break; - } - default: - return -3; - } - bytesperline = width * ((mask3 & 0x00E0) >> 5); - sizeimage = bytesperline * height; - - for (m = 0; m < INTERLACE_MANY; m++) { - mask4 = 0x0000; - switch (m) { - case FIELD_NONE: { - name4 = "-n"; - field = V4L2_FIELD_NONE; - break; - } - case FIELD_INTERLACED: { - name4 = "-i"; - mask4 |= 0x1000; - field = V4L2_FIELD_INTERLACED; - break; - } - default: - return -4; - } - if (SETTINGS_MANY <= n) - return -5; - - strcpy(easycap_format[n].name, name1); - strcat(easycap_format[n].name, name2); - strcat(easycap_format[n].name, "_"); - strcat(easycap_format[n].name, name3); - strcat(easycap_format[n].name, name4); - easycap_format[n].mask = - mask1 | mask2 | mask3 | mask4; - fmt = &easycap_format[n].v4l2_format; - - fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - fmt->fmt.pix.width = width; - fmt->fmt.pix.height = height; - fmt->fmt.pix.pixelformat = pixelformat; - fmt->fmt.pix.field = field; - fmt->fmt.pix.bytesperline = bytesperline; - fmt->fmt.pix.sizeimage = sizeimage; - fmt->fmt.pix.colorspace = colorspace; - fmt->fmt.pix.priv = 0; - n++; - } - } - } - } - if ((1 + SETTINGS_MANY) <= n) - return -6; - easycap_format[n].mask = 0xFFFF; - return n; -} -/*---------------------------------------------------------------------------*/ -struct v4l2_queryctrl easycap_control[] = { - { - .id = V4L2_CID_BRIGHTNESS, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Brightness", - .minimum = 0, - .maximum = 255, - .step = 1, - .default_value = SAA_0A_DEFAULT, - .flags = 0, - .reserved = {0, 0} - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .id = V4L2_CID_CONTRAST, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Contrast", - .minimum = 0, - .maximum = 255, - .step = 1, - .default_value = SAA_0B_DEFAULT + 128, - .flags = 0, - .reserved = {0, 0} - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .id = V4L2_CID_SATURATION, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Saturation", - .minimum = 0, - .maximum = 255, - .step = 1, - .default_value = SAA_0C_DEFAULT + 128, - .flags = 0, - .reserved = {0, 0} - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .id = V4L2_CID_HUE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Hue", - .minimum = 0, - .maximum = 255, - .step = 1, - .default_value = SAA_0D_DEFAULT + 128, - .flags = 0, - .reserved = {0, 0} - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .id = V4L2_CID_AUDIO_VOLUME, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Volume", - .minimum = 0, - .maximum = 31, - .step = 1, - .default_value = 16, - .flags = 0, - .reserved = {0, 0} - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .id = V4L2_CID_AUDIO_MUTE, - .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Mute", - .default_value = true, - .flags = 0, - .reserved = {0, 0} - }, -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - { - .id = 0xFFFFFFFF - } -}; -/*****************************************************************************/ diff --git a/drivers/staging/media/easycap/easycap_sound.c b/drivers/staging/media/easycap/easycap_sound.c deleted file mode 100644 index 8c8bcae8ded8470886f81fac6599d88f67fb251c..0000000000000000000000000000000000000000 --- a/drivers/staging/media/easycap/easycap_sound.c +++ /dev/null @@ -1,750 +0,0 @@ -/****************************************************************************** -* * -* easycap_sound.c * -* * -* Audio driver for EasyCAP USB2.0 Video Capture Device DC60 * -* * -* * -******************************************************************************/ -/* - * - * Copyright (C) 2010 R.M. Thomas - * - * - * This is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The software is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this software; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ -/*****************************************************************************/ - -#include "easycap.h" - -/*--------------------------------------------------------------------------*/ -/* - * PARAMETERS USED WHEN REGISTERING THE AUDIO INTERFACE - */ -/*--------------------------------------------------------------------------*/ -static const struct snd_pcm_hardware alsa_hardware = { - .info = SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_MMAP_VALID, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000, - .rate_min = 32000, - .rate_max = 48000, - .channels_min = 2, - .channels_max = 2, - .buffer_bytes_max = PAGE_SIZE * - PAGES_PER_AUDIO_FRAGMENT * - AUDIO_FRAGMENT_MANY, - .period_bytes_min = PAGE_SIZE * PAGES_PER_AUDIO_FRAGMENT, - .period_bytes_max = PAGE_SIZE * PAGES_PER_AUDIO_FRAGMENT * 2, - .periods_min = AUDIO_FRAGMENT_MANY, - .periods_max = AUDIO_FRAGMENT_MANY * 2, -}; - - -/*---------------------------------------------------------------------------*/ -/* - * SUBMIT ALL AUDIO URBS. - */ -/*---------------------------------------------------------------------------*/ -static int easycap_audio_submit_urbs(struct easycap *peasycap) -{ - struct data_urb *pdata_urb; - struct urb *purb; - struct list_head *plist_head; - int j, isbad, nospc, m, rc; - int isbuf; - - if (!peasycap->purb_audio_head) { - SAM("ERROR: peasycap->urb_audio_head uninitialized\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - - if (peasycap->audio_isoc_streaming) { - JOM(4, "already streaming audio urbs\n"); - return 0; - } - - JOM(4, "initial submission of all audio urbs\n"); - rc = usb_set_interface(peasycap->pusb_device, - peasycap->audio_interface, - peasycap->audio_altsetting_on); - JOM(8, "usb_set_interface(.,%i,%i) returned %i\n", - peasycap->audio_interface, - peasycap->audio_altsetting_on, rc); - - isbad = 0; - nospc = 0; - m = 0; - list_for_each(plist_head, peasycap->purb_audio_head) { - pdata_urb = list_entry(plist_head, struct data_urb, list_head); - if (pdata_urb && pdata_urb->purb) { - purb = pdata_urb->purb; - isbuf = pdata_urb->isbuf; - - purb->interval = 1; - purb->dev = peasycap->pusb_device; - purb->pipe = usb_rcvisocpipe(peasycap->pusb_device, - peasycap->audio_endpointnumber); - purb->transfer_flags = URB_ISO_ASAP; - purb->transfer_buffer = peasycap->audio_isoc_buffer[isbuf].pgo; - purb->transfer_buffer_length = peasycap->audio_isoc_buffer_size; - purb->complete = easycap_alsa_complete; - purb->context = peasycap; - purb->start_frame = 0; - purb->number_of_packets = peasycap->audio_isoc_framesperdesc; - for (j = 0; j < peasycap->audio_isoc_framesperdesc; j++) { - purb->iso_frame_desc[j].offset = j * peasycap->audio_isoc_maxframesize; - purb->iso_frame_desc[j].length = peasycap->audio_isoc_maxframesize; - } - - rc = usb_submit_urb(purb, GFP_KERNEL); - if (rc) { - isbad++; - SAM("ERROR: usb_submit_urb() failed" - " for urb with rc: -%s: %d\n", - strerror(rc), rc); - } else { - m++; - } - } else { - isbad++; - } - } - if (nospc) { - SAM("-ENOSPC=usb_submit_urb() for %i urbs\n", nospc); - SAM("..... possibly inadequate USB bandwidth\n"); - peasycap->audio_eof = 1; - } - - if (isbad) - easycap_audio_kill_urbs(peasycap); - else - peasycap->audio_isoc_streaming = m; - - return 0; -} -/*---------------------------------------------------------------------------*/ -/* - * COMMON AUDIO INITIALIZATION - */ -/*---------------------------------------------------------------------------*/ -static int easycap_sound_setup(struct easycap *peasycap) -{ - int rc; - - JOM(4, "starting initialization\n"); - - if (!peasycap) { - SAY("ERROR: peasycap is NULL.\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -ENODEV; - } - JOM(16, "0x%08lX=peasycap->pusb_device\n", (long int)peasycap->pusb_device); - - rc = easycap_audio_setup(peasycap); - JOM(8, "audio_setup() returned %i\n", rc); - - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device has become NULL\n"); - return -ENODEV; - } -/*---------------------------------------------------------------------------*/ - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device has become NULL\n"); - return -ENODEV; - } - rc = usb_set_interface(peasycap->pusb_device, peasycap->audio_interface, - peasycap->audio_altsetting_on); - JOM(8, "usb_set_interface(.,%i,%i) returned %i\n", peasycap->audio_interface, - peasycap->audio_altsetting_on, rc); - - rc = easycap_wakeup_device(peasycap->pusb_device); - JOM(8, "wakeup_device() returned %i\n", rc); - - peasycap->audio_eof = 0; - peasycap->audio_idle = 0; - - easycap_audio_submit_urbs(peasycap); - - JOM(4, "finished initialization\n"); - return 0; -} -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* - * ON COMPLETION OF AN AUDIO URB ITS DATA IS COPIED TO THE DAM BUFFER - * PROVIDED peasycap->audio_idle IS ZERO. REGARDLESS OF THIS BEING TRUE, - * IT IS RESUBMITTED PROVIDED peasycap->audio_isoc_streaming IS NOT ZERO. - */ -/*---------------------------------------------------------------------------*/ -void easycap_alsa_complete(struct urb *purb) -{ - struct easycap *peasycap; - struct snd_pcm_substream *pss; - struct snd_pcm_runtime *prt; - int dma_bytes, fragment_bytes; - int isfragment; - u8 *p1, *p2; - s16 tmp; - int i, j, more, much, rc; -#ifdef UPSAMPLE - int k; - s16 oldaudio, newaudio, delta; -#endif /*UPSAMPLE*/ - - JOT(16, "\n"); - - if (!purb) { - SAY("ERROR: purb is NULL\n"); - return; - } - peasycap = purb->context; - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return; - } - much = 0; - if (peasycap->audio_idle) { - JOM(16, "%i=audio_idle %i=audio_isoc_streaming\n", - peasycap->audio_idle, peasycap->audio_isoc_streaming); - if (peasycap->audio_isoc_streaming) - goto resubmit; - } -/*---------------------------------------------------------------------------*/ - pss = peasycap->psubstream; - if (!pss) - goto resubmit; - prt = pss->runtime; - if (!prt) - goto resubmit; - dma_bytes = (int)prt->dma_bytes; - if (0 == dma_bytes) - goto resubmit; - fragment_bytes = 4 * ((int)prt->period_size); - if (0 == fragment_bytes) - goto resubmit; -/* -------------------------------------------------------------------------*/ - if (purb->status) { - if ((-ESHUTDOWN == purb->status) || (-ENOENT == purb->status)) { - JOM(16, "urb status -ESHUTDOWN or -ENOENT\n"); - return; - } - SAM("ERROR: non-zero urb status: -%s: %d\n", - strerror(purb->status), purb->status); - goto resubmit; - } -/*---------------------------------------------------------------------------*/ -/* - * PROCEED HERE WHEN NO ERROR - */ -/*---------------------------------------------------------------------------*/ - -#ifdef UPSAMPLE - oldaudio = peasycap->oldaudio; -#endif /*UPSAMPLE*/ - - for (i = 0; i < purb->number_of_packets; i++) { - if (purb->iso_frame_desc[i].status < 0) { - SAM("-%s: %d\n", - strerror(purb->iso_frame_desc[i].status), - purb->iso_frame_desc[i].status); - } - if (purb->iso_frame_desc[i].status) { - JOM(12, "discarding audio samples because " - "%i=purb->iso_frame_desc[i].status\n", - purb->iso_frame_desc[i].status); - continue; - } - more = purb->iso_frame_desc[i].actual_length; - if (more == 0) { - peasycap->audio_mt++; - continue; - } - if (0 > more) { - SAM("MISTAKE: more is negative\n"); - return; - } - - if (peasycap->audio_mt) { - JOM(12, "%4i empty audio urb frames\n", - peasycap->audio_mt); - peasycap->audio_mt = 0; - } - - p1 = (u8 *)(purb->transfer_buffer + - purb->iso_frame_desc[i].offset); - - /* - * COPY more BYTES FROM ISOC BUFFER - * TO THE DMA BUFFER, CONVERTING - * 8-BIT MONO TO 16-BIT SIGNED - * LITTLE-ENDIAN SAMPLES IF NECESSARY - */ - while (more) { - much = dma_bytes - peasycap->dma_fill; - if (0 > much) { - SAM("MISTAKE: much is negative\n"); - return; - } - if (0 == much) { - peasycap->dma_fill = 0; - peasycap->dma_next = fragment_bytes; - JOM(8, "wrapped dma buffer\n"); - } - if (!peasycap->microphone) { - if (much > more) - much = more; - memcpy(prt->dma_area + peasycap->dma_fill, - p1, much); - p1 += much; - more -= much; - } else { -#ifdef UPSAMPLE - if (much % 16) - JOM(8, "MISTAKE? much" - " is not divisible by 16\n"); - if (much > (16 * more)) - much = 16 * more; - p2 = (u8 *)(prt->dma_area + peasycap->dma_fill); - - for (j = 0; j < (much / 16); j++) { - newaudio = ((int) *p1) - 128; - newaudio = 128 * newaudio; - - delta = (newaudio - oldaudio) / 4; - tmp = oldaudio + delta; - - for (k = 0; k < 4; k++) { - *p2 = (0x00FF & tmp); - *(p2 + 1) = (0xFF00 & tmp) >> 8; - p2 += 2; - *p2 = (0x00FF & tmp); - *(p2 + 1) = (0xFF00 & tmp) >> 8; - p2 += 2; - tmp += delta; - } - p1++; - more--; - oldaudio = tmp; - } -#else /*!UPSAMPLE*/ - if (much > (2 * more)) - much = 2 * more; - p2 = (u8 *)(prt->dma_area + peasycap->dma_fill); - - for (j = 0; j < (much / 2); j++) { - tmp = ((int) *p1) - 128; - tmp = 128 * tmp; - *p2 = (0x00FF & tmp); - *(p2 + 1) = (0xFF00 & tmp) >> 8; - p1++; - p2 += 2; - more--; - } -#endif /*UPSAMPLE*/ - } - peasycap->dma_fill += much; - if (peasycap->dma_fill >= peasycap->dma_next) { - isfragment = peasycap->dma_fill / fragment_bytes; - if (0 > isfragment) { - SAM("MISTAKE: isfragment is negative\n"); - return; - } - peasycap->dma_read = (isfragment - 1) * fragment_bytes; - peasycap->dma_next = (isfragment + 1) * fragment_bytes; - if (dma_bytes < peasycap->dma_next) - peasycap->dma_next = fragment_bytes; - - if (0 <= peasycap->dma_read) { - JOM(8, "snd_pcm_period_elapsed(), %i=" - "isfragment\n", isfragment); - snd_pcm_period_elapsed(pss); - } - } - } - -#ifdef UPSAMPLE - peasycap->oldaudio = oldaudio; -#endif /*UPSAMPLE*/ - - } -/*---------------------------------------------------------------------------*/ -/* - * RESUBMIT THIS URB - */ -/*---------------------------------------------------------------------------*/ -resubmit: - if (peasycap->audio_isoc_streaming == 0) - return; - - rc = usb_submit_urb(purb, GFP_ATOMIC); - if (rc) { - if ((-ENODEV != rc) && (-ENOENT != rc)) { - SAM("ERROR: while %i=audio_idle, usb_submit_urb failed " - "with rc: -%s :%d\n", - peasycap->audio_idle, strerror(rc), rc); - } - if (0 < peasycap->audio_isoc_streaming) - peasycap->audio_isoc_streaming--; - } - return; -} -/*****************************************************************************/ -static int easycap_alsa_open(struct snd_pcm_substream *pss) -{ - struct snd_pcm *psnd_pcm; - struct snd_card *psnd_card; - struct easycap *peasycap; - - JOT(4, "\n"); - if (!pss) { - SAY("ERROR: pss is NULL\n"); - return -EFAULT; - } - psnd_pcm = pss->pcm; - if (!psnd_pcm) { - SAY("ERROR: psnd_pcm is NULL\n"); - return -EFAULT; - } - psnd_card = psnd_pcm->card; - if (!psnd_card) { - SAY("ERROR: psnd_card is NULL\n"); - return -EFAULT; - } - - peasycap = psnd_card->private_data; - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (peasycap->psnd_card != psnd_card) { - SAM("ERROR: bad peasycap->psnd_card\n"); - return -EFAULT; - } - if (peasycap->psubstream) { - SAM("ERROR: bad peasycap->psubstream\n"); - return -EFAULT; - } - pss->private_data = peasycap; - peasycap->psubstream = pss; - pss->runtime->hw = peasycap->alsa_hardware; - pss->runtime->private_data = peasycap; - pss->private_data = peasycap; - - if (0 != easycap_sound_setup(peasycap)) { - JOM(4, "ending unsuccessfully\n"); - return -EFAULT; - } - JOM(4, "ending successfully\n"); - return 0; -} -/*****************************************************************************/ -static int easycap_alsa_close(struct snd_pcm_substream *pss) -{ - struct easycap *peasycap; - - JOT(4, "\n"); - if (!pss) { - SAY("ERROR: pss is NULL\n"); - return -EFAULT; - } - peasycap = snd_pcm_substream_chip(pss); - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - pss->private_data = NULL; - peasycap->psubstream = NULL; - JOT(4, "ending successfully\n"); - return 0; -} -/*****************************************************************************/ -static int easycap_alsa_vmalloc(struct snd_pcm_substream *pss, size_t sz) -{ - struct snd_pcm_runtime *prt; - JOT(4, "\n"); - - if (!pss) { - SAY("ERROR: pss is NULL\n"); - return -EFAULT; - } - prt = pss->runtime; - if (!prt) { - SAY("ERROR: substream.runtime is NULL\n"); - return -EFAULT; - } - if (prt->dma_area) { - if (prt->dma_bytes > sz) - return 0; - vfree(prt->dma_area); - } - prt->dma_area = vmalloc(sz); - if (!prt->dma_area) - return -ENOMEM; - prt->dma_bytes = sz; - return 0; -} -/*****************************************************************************/ -static int easycap_alsa_hw_params(struct snd_pcm_substream *pss, - struct snd_pcm_hw_params *phw) -{ - int rc; - - JOT(4, "%i\n", (params_buffer_bytes(phw))); - if (!pss) { - SAY("ERROR: pss is NULL\n"); - return -EFAULT; - } - rc = easycap_alsa_vmalloc(pss, params_buffer_bytes(phw)); - if (rc) - return rc; - return 0; -} -/*****************************************************************************/ -static int easycap_alsa_hw_free(struct snd_pcm_substream *pss) -{ - struct snd_pcm_runtime *prt; - JOT(4, "\n"); - - if (!pss) { - SAY("ERROR: pss is NULL\n"); - return -EFAULT; - } - prt = pss->runtime; - if (!prt) { - SAY("ERROR: substream.runtime is NULL\n"); - return -EFAULT; - } - if (prt->dma_area) { - JOT(8, "prt->dma_area = %p\n", prt->dma_area); - vfree(prt->dma_area); - prt->dma_area = NULL; - } else - JOT(8, "dma_area already freed\n"); - return 0; -} -/*****************************************************************************/ -static int easycap_alsa_prepare(struct snd_pcm_substream *pss) -{ - struct easycap *peasycap; - struct snd_pcm_runtime *prt; - - JOT(4, "\n"); - if (!pss) { - SAY("ERROR: pss is NULL\n"); - return -EFAULT; - } - prt = pss->runtime; - peasycap = snd_pcm_substream_chip(pss); - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - - JOM(16, "ALSA decides %8i Hz=rate\n", pss->runtime->rate); - JOM(16, "ALSA decides %8ld =period_size\n", pss->runtime->period_size); - JOM(16, "ALSA decides %8i =periods\n", pss->runtime->periods); - JOM(16, "ALSA decides %8ld =buffer_size\n", pss->runtime->buffer_size); - JOM(16, "ALSA decides %8zd =dma_bytes\n", pss->runtime->dma_bytes); - JOM(16, "ALSA decides %8ld =boundary\n", pss->runtime->boundary); - JOM(16, "ALSA decides %8i =period_step\n", pss->runtime->period_step); - JOM(16, "ALSA decides %8i =sample_bits\n", pss->runtime->sample_bits); - JOM(16, "ALSA decides %8i =frame_bits\n", pss->runtime->frame_bits); - JOM(16, "ALSA decides %8ld =min_align\n", pss->runtime->min_align); - JOM(12, "ALSA decides %8ld =hw_ptr_base\n", pss->runtime->hw_ptr_base); - JOM(12, "ALSA decides %8ld =hw_ptr_interrupt\n", - pss->runtime->hw_ptr_interrupt); - - if (prt->dma_bytes != 4 * ((int)prt->period_size) * ((int)prt->periods)) { - SAY("MISTAKE: unexpected ALSA parameters\n"); - return -ENOENT; - } - return 0; -} -/*****************************************************************************/ -static int easycap_alsa_ack(struct snd_pcm_substream *pss) -{ - return 0; -} -/*****************************************************************************/ -static int easycap_alsa_trigger(struct snd_pcm_substream *pss, int cmd) -{ - struct easycap *peasycap; - - JOT(4, "%i=cmd cf %i=START %i=STOP\n", cmd, SNDRV_PCM_TRIGGER_START, - SNDRV_PCM_TRIGGER_STOP); - if (!pss) { - SAY("ERROR: pss is NULL\n"); - return -EFAULT; - } - peasycap = snd_pcm_substream_chip(pss); - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: { - peasycap->audio_idle = 0; - break; - } - case SNDRV_PCM_TRIGGER_STOP: { - peasycap->audio_idle = 1; - break; - } - default: - return -EINVAL; - } - return 0; -} -/*****************************************************************************/ -static snd_pcm_uframes_t easycap_alsa_pointer(struct snd_pcm_substream *pss) -{ - struct easycap *peasycap; - snd_pcm_uframes_t offset; - - JOT(16, "\n"); - if (!pss) { - SAY("ERROR: pss is NULL\n"); - return -EFAULT; - } - peasycap = snd_pcm_substream_chip(pss); - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if ((0 != peasycap->audio_eof) || (0 != peasycap->audio_idle)) { - JOM(8, "returning -EIO because " - "%i=audio_idle %i=audio_eof\n", - peasycap->audio_idle, peasycap->audio_eof); - return -EIO; - } -/*---------------------------------------------------------------------------*/ - if (0 > peasycap->dma_read) { - JOM(8, "returning -EBUSY\n"); - return -EBUSY; - } - offset = ((snd_pcm_uframes_t)peasycap->dma_read)/4; - JOM(8, "ALSA decides %8i =hw_ptr_base\n", (int)pss->runtime->hw_ptr_base); - JOM(8, "ALSA decides %8i =hw_ptr_interrupt\n", - (int)pss->runtime->hw_ptr_interrupt); - JOM(8, "%7i=offset %7i=dma_read %7i=dma_next\n", - (int)offset, peasycap->dma_read, peasycap->dma_next); - return offset; -} -/*****************************************************************************/ -static struct page * -easycap_alsa_page(struct snd_pcm_substream *pss, unsigned long offset) -{ - return vmalloc_to_page(pss->runtime->dma_area + offset); -} -/*****************************************************************************/ - -static struct snd_pcm_ops easycap_alsa_pcm_ops = { - .open = easycap_alsa_open, - .close = easycap_alsa_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = easycap_alsa_hw_params, - .hw_free = easycap_alsa_hw_free, - .prepare = easycap_alsa_prepare, - .ack = easycap_alsa_ack, - .trigger = easycap_alsa_trigger, - .pointer = easycap_alsa_pointer, - .page = easycap_alsa_page, -}; - -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* - * THE FUNCTION snd_card_create() HAS THIS_MODULE AS AN ARGUMENT. THIS - * MEANS MODULE easycap. BEWARE. -*/ -/*---------------------------------------------------------------------------*/ -int easycap_alsa_probe(struct easycap *peasycap) -{ - int rc; - struct snd_card *psnd_card; - struct snd_pcm *psnd_pcm; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -ENODEV; - } - if (0 > peasycap->minor) { - SAY("ERROR: no minor\n"); - return -ENODEV; - } - - peasycap->alsa_hardware = alsa_hardware; - if (peasycap->microphone) { - peasycap->alsa_hardware.rates = SNDRV_PCM_RATE_32000; - peasycap->alsa_hardware.rate_min = 32000; - peasycap->alsa_hardware.rate_max = 32000; - } else { - peasycap->alsa_hardware.rates = SNDRV_PCM_RATE_48000; - peasycap->alsa_hardware.rate_min = 48000; - peasycap->alsa_hardware.rate_max = 48000; - } - - if (0 != snd_card_create(SNDRV_DEFAULT_IDX1, "easycap_alsa", - THIS_MODULE, 0, &psnd_card)) { - SAY("ERROR: Cannot do ALSA snd_card_create()\n"); - return -EFAULT; - } - - sprintf(&psnd_card->id[0], "EasyALSA%i", peasycap->minor); - strcpy(&psnd_card->driver[0], EASYCAP_DRIVER_DESCRIPTION); - strcpy(&psnd_card->shortname[0], "easycap_alsa"); - sprintf(&psnd_card->longname[0], "%s", &psnd_card->shortname[0]); - - psnd_card->dev = &peasycap->pusb_device->dev; - psnd_card->private_data = peasycap; - peasycap->psnd_card = psnd_card; - - rc = snd_pcm_new(psnd_card, "easycap_pcm", 0, 0, 1, &psnd_pcm); - if (rc) { - SAM("ERROR: Cannot do ALSA snd_pcm_new()\n"); - snd_card_free(psnd_card); - return -EFAULT; - } - - snd_pcm_set_ops(psnd_pcm, SNDRV_PCM_STREAM_CAPTURE, - &easycap_alsa_pcm_ops); - psnd_pcm->info_flags = 0; - strcpy(&psnd_pcm->name[0], &psnd_card->id[0]); - psnd_pcm->private_data = peasycap; - peasycap->psnd_pcm = psnd_pcm; - peasycap->psubstream = NULL; - - rc = snd_card_register(psnd_card); - if (rc) { - SAM("ERROR: Cannot do ALSA snd_card_register()\n"); - snd_card_free(psnd_card); - return -EFAULT; - } - - SAM("registered %s\n", &psnd_card->id[0]); - return 0; -} - diff --git a/drivers/staging/media/easycap/easycap_testcard.c b/drivers/staging/media/easycap/easycap_testcard.c deleted file mode 100644 index 0f71470ace39cb199d5bb11380a11e12f49db83c..0000000000000000000000000000000000000000 --- a/drivers/staging/media/easycap/easycap_testcard.c +++ /dev/null @@ -1,155 +0,0 @@ -/****************************************************************************** -* * -* easycap_testcard.c * -* * -******************************************************************************/ -/* - * - * Copyright (C) 2010 R.M. Thomas - * - * - * This is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The software is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this software; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ -/*****************************************************************************/ - -#include "easycap.h" - -/*****************************************************************************/ -#define TESTCARD_BYTESPERLINE (2 * 720) -void -easycap_testcard(struct easycap *peasycap, int field) -{ - int total; - int y, u, v, r, g, b; - unsigned char uyvy[4]; - int i1, line, k, m, n, more, much, barwidth, barheight; - unsigned char bfbar[TESTCARD_BYTESPERLINE / 8], *p1, *p2; - struct data_buffer *pfield_buffer; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return; - } - JOM(8, "%i=field\n", field); - switch (peasycap->width) { - case 720: - case 360: { - barwidth = (2 * 720) / 8; - break; - } - case 704: - case 352: { - barwidth = (2 * 704) / 8; - break; - } - case 640: - case 320: { - barwidth = (2 * 640) / 8; - break; - } - default: { - SAM("ERROR: cannot set barwidth\n"); - return; - } - } - if (TESTCARD_BYTESPERLINE < barwidth) { - SAM("ERROR: barwidth is too large\n"); - return; - } - switch (peasycap->height) { - case 576: - case 288: { - barheight = 576; - break; - } - case 480: - case 240: { - barheight = 480; - break; - } - default: { - SAM("ERROR: cannot set barheight\n"); - return; - } - } - total = 0; - k = field; - m = 0; - n = 0; - - for (line = 0; line < (barheight / 2); line++) { - for (i1 = 0; i1 < 8; i1++) { - r = (i1 * 256)/8; - g = (i1 * 256)/8; - b = (i1 * 256)/8; - - y = 299*r/1000 + 587*g/1000 + 114*b/1000 ; - u = -147*r/1000 - 289*g/1000 + 436*b/1000 ; - u = u + 128; - v = 615*r/1000 - 515*g/1000 - 100*b/1000 ; - v = v + 128; - - uyvy[0] = 0xFF & u ; - uyvy[1] = 0xFF & y ; - uyvy[2] = 0xFF & v ; - uyvy[3] = 0xFF & y ; - - p1 = &bfbar[0]; - while (p1 < &bfbar[barwidth]) { - *p1++ = uyvy[0] ; - *p1++ = uyvy[1] ; - *p1++ = uyvy[2] ; - *p1++ = uyvy[3] ; - total += 4; - } - - p1 = &bfbar[0]; - more = barwidth; - - while (more) { - if ((FIELD_BUFFER_SIZE/PAGE_SIZE) <= m) { - SAM("ERROR: bad m reached\n"); - return; - } - if (PAGE_SIZE < n) { - SAM("ERROR: bad n reached\n"); - return; - } - - if (0 > more) { - SAM("ERROR: internal fault\n"); - return; - } - - much = PAGE_SIZE - n; - if (much > more) - much = more; - pfield_buffer = &peasycap->field_buffer[k][m]; - p2 = pfield_buffer->pgo + n; - memcpy(p2, p1, much); - - p1 += much; - n += much; - more -= much; - if (PAGE_SIZE == n) { - m++; - n = 0; - } - } - } - } - return; -} diff --git a/drivers/staging/media/go7007/Makefile b/drivers/staging/media/go7007/Makefile index 6ee837c56706308b5a7fb951d088b878573e6072..3fdbef5306a0a9bea05d30822fb6287b2c378117 100644 --- a/drivers/staging/media/go7007/Makefile +++ b/drivers/staging/media/go7007/Makefile @@ -24,7 +24,7 @@ s2250-y := s2250-board.o #ccflags-$(CONFIG_VIDEO_SAA7134:m=y) += -Idrivers/media/video/saa7134 -DSAA7134_MPEG_GO7007=3 # S2250 needs cypress ezusb loader from dvb-usb -ccflags-$(CONFIG_VIDEO_GO7007_USB_S2250_BOARD:m=y) += -Idrivers/media/dvb/dvb-usb +ccflags-$(CONFIG_VIDEO_GO7007_USB_S2250_BOARD:m=y) += -Idrivers/media/usb/dvb-usb -ccflags-y += -Idrivers/media/dvb/frontends -ccflags-y += -Idrivers/media/dvb/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends +ccflags-y += -Idrivers/media/dvb-core diff --git a/drivers/staging/media/go7007/go7007-v4l2.c b/drivers/staging/media/go7007/go7007-v4l2.c index c184ad30fbd8c6ea9e8cc9f806f582c917c0637c..980371b0274966b45b71a38621f4452e8bf0cf72 100644 --- a/drivers/staging/media/go7007/go7007-v4l2.c +++ b/drivers/staging/media/go7007/go7007-v4l2.c @@ -1372,7 +1372,7 @@ static int vidioc_g_crop(struct file *file, void *priv, struct v4l2_crop *crop) /* FIXME: vidioc_s_crop is not really implemented!!! */ -static int vidioc_s_crop(struct file *file, void *priv, struct v4l2_crop *crop) +static int vidioc_s_crop(struct file *file, void *priv, const struct v4l2_crop *crop) { if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -1392,7 +1392,7 @@ static int vidioc_g_jpegcomp(struct file *file, void *priv, } static int vidioc_s_jpegcomp(struct file *file, void *priv, - struct v4l2_jpegcompression *params) + const struct v4l2_jpegcompression *params) { if (params->quality != 50 || params->jpeg_markers != (V4L2_JPEG_MARKER_DHT | diff --git a/drivers/staging/media/lirc/Kconfig b/drivers/staging/media/lirc/Kconfig index 526ec0fc2f042703b0237d9e29887dfd47fb23f8..e60a59fc252bd22255739b5053fe25fb8363e5d7 100644 --- a/drivers/staging/media/lirc/Kconfig +++ b/drivers/staging/media/lirc/Kconfig @@ -63,12 +63,6 @@ config LIRC_SIR help Driver for the SIR IrDA port -config LIRC_TTUSBIR - tristate "Technotrend USB IR Receiver" - depends on LIRC && USB - help - Driver for the Technotrend USB IR Receiver - config LIRC_ZILOG tristate "Zilog/Hauppauge IR Transmitter" depends on LIRC && I2C diff --git a/drivers/staging/media/lirc/Makefile b/drivers/staging/media/lirc/Makefile index d76b0fa2af53413bbfe4b318fda00e0beb060a73..b90fcabddab6fe48dbe93066cdf01d5b4674a5a4 100644 --- a/drivers/staging/media/lirc/Makefile +++ b/drivers/staging/media/lirc/Makefile @@ -10,5 +10,4 @@ obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o obj-$(CONFIG_LIRC_SIR) += lirc_sir.o -obj-$(CONFIG_LIRC_TTUSBIR) += lirc_ttusbir.o obj-$(CONFIG_LIRC_ZILOG) += lirc_zilog.o diff --git a/drivers/staging/media/lirc/lirc_ene0100.h b/drivers/staging/media/lirc/lirc_ene0100.h deleted file mode 100644 index 06bebd6acc46f1a692ace4849c816b530c4c9b2e..0000000000000000000000000000000000000000 --- a/drivers/staging/media/lirc/lirc_ene0100.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * driver for ENE KB3926 B/C/D CIR (also known as ENE0100) - * - * Copyright (C) 2009 Maxim Levitsky - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include -#include - -/* hardware address */ -#define ENE_STATUS 0 /* hardware status - unused */ -#define ENE_ADDR_HI 1 /* hi byte of register address */ -#define ENE_ADDR_LO 2 /* low byte of register address */ -#define ENE_IO 3 /* read/write window */ -#define ENE_MAX_IO 4 - -/* 8 bytes of samples, divided in 2 halfs*/ -#define ENE_SAMPLE_BUFFER 0xF8F0 /* regular sample buffer */ -#define ENE_SAMPLE_SPC_MASK (1 << 7) /* sample is space */ -#define ENE_SAMPLE_VALUE_MASK 0x7F -#define ENE_SAMPLE_OVERFLOW 0x7F -#define ENE_SAMPLES_SIZE 4 - -/* fan input sample buffer */ -#define ENE_SAMPLE_BUFFER_FAN 0xF8FB /* this buffer holds high byte of */ - /* each sample of normal buffer */ - -#define ENE_FAN_SMPL_PULS_MSK 0x8000 /* this bit of combined sample */ - /* if set, says that sample is pulse */ -#define ENE_FAN_VALUE_MASK 0x0FFF /* mask for valid bits of the value */ - -/* first firmware register */ -#define ENE_FW1 0xF8F8 -#define ENE_FW1_ENABLE (1 << 0) /* enable fw processing */ -#define ENE_FW1_TXIRQ (1 << 1) /* TX interrupt pending */ -#define ENE_FW1_WAKE (1 << 6) /* enable wake from S3 */ -#define ENE_FW1_IRQ (1 << 7) /* enable interrupt */ - -/* second firmware register */ -#define ENE_FW2 0xF8F9 -#define ENE_FW2_BUF_HIGH (1 << 0) /* which half of the buffer to read */ -#define ENE_FW2_IRQ_CLR (1 << 2) /* clear this on IRQ */ -#define ENE_FW2_GP40_AS_LEARN (1 << 4) /* normal input is used as */ - /* learning input */ -#define ENE_FW2_FAN_AS_NRML_IN (1 << 6) /* fan is used as normal input */ -#define ENE_FW2_LEARNING (1 << 7) /* hardware supports learning and TX */ - -/* fan as input settings - only if learning capable */ -#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */ -#define ENE_FAN_AS_IN1_EN 0xCD -#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */ -#define ENE_FAN_AS_IN2_EN 0x03 -#define ENE_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */ - -/* IRQ registers block (for revision B) */ -#define ENEB_IRQ 0xFD09 /* IRQ number */ -#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */ -#define ENEB_IRQ_STATUS 0xFD80 /* irq status */ -#define ENEB_IRQ_STATUS_IR (1 << 5) /* IR irq */ - -/* IRQ registers block (for revision C,D) */ -#define ENEC_IRQ 0xFE9B /* new irq settings register */ -#define ENEC_IRQ_MASK 0x0F /* irq number mask */ -#define ENEC_IRQ_UNK_EN (1 << 4) /* always enabled */ -#define ENEC_IRQ_STATUS (1 << 5) /* irq status and ACK */ - -/* CIR block settings */ -#define ENE_CIR_CONF1 0xFEC0 -#define ENE_CIR_CONF1_ADC_ON 0x7 /* receiver on gpio40 enabled */ -#define ENE_CIR_CONF1_LEARN1 (1 << 3) /* enabled on learning mode */ -#define ENE_CIR_CONF1_TX_ON 0x30 /* enabled on transmit */ -#define ENE_CIR_CONF1_TX_CARR (1 << 7) /* send TX carrier or not */ - -#define ENE_CIR_CONF2 0xFEC1 /* unknown setting = 0 */ -#define ENE_CIR_CONF2_LEARN2 (1 << 4) /* set on enable learning */ -#define ENE_CIR_CONF2_GPIO40DIS (1 << 5) /* disable normal input via gpio40 */ - -#define ENE_CIR_SAMPLE_PERIOD 0xFEC8 /* sample period in us */ -#define ENE_CIR_SAMPLE_OVERFLOW (1 << 7) /* interrupt on overflows if set */ - - -/* transmitter - not implemented yet */ -/* KB3926C and higher */ -/* transmission is very similar to receiving, a byte is written to */ -/* ENE_TX_INPUT, in same manner as it is read from sample buffer */ -/* sample period is fixed*/ - - -/* transmitter ports */ -#define ENE_TX_PORT1 0xFC01 /* this enables one or both */ -#define ENE_TX_PORT1_EN (1 << 5) /* TX ports */ -#define ENE_TX_PORT2 0xFC08 -#define ENE_TX_PORT2_EN (1 << 1) - -#define ENE_TX_INPUT 0xFEC9 /* next byte to transmit */ -#define ENE_TX_SPC_MASK (1 << 7) /* Transmitted sample is space */ -#define ENE_TX_UNK1 0xFECB /* set to 0x63 */ -#define ENE_TX_SMPL_PERIOD 50 /* transmit sample period */ - - -#define ENE_TX_CARRIER 0xFECE /* TX carrier * 2 (khz) */ -#define ENE_TX_CARRIER_UNKBIT 0x80 /* This bit set on transmit */ -#define ENE_TX_CARRIER_LOW 0xFECF /* TX carrier / 2 */ - -/* Hardware versions */ -#define ENE_HW_VERSION 0xFF00 /* hardware revision */ -#define ENE_HW_UNK 0xFF1D -#define ENE_HW_UNK_CLR (1 << 2) -#define ENE_HW_VER_MAJOR 0xFF1E /* chip version */ -#define ENE_HW_VER_MINOR 0xFF1F -#define ENE_HW_VER_OLD 0xFD00 - -#define same_sign(a, b) ((((a) > 0) && (b) > 0) || ((a) < 0 && (b) < 0)) - -#define ENE_DRIVER_NAME "enecir" -#define ENE_MAXGAP 250000 /* this is amount of time we wait - before turning the sampler, chosen - arbitry */ - -#define space(len) (-(len)) /* add a space */ - -/* software defines */ -#define ENE_IRQ_RX 1 -#define ENE_IRQ_TX 2 - -#define ENE_HW_B 1 /* 3926B */ -#define ENE_HW_C 2 /* 3926C */ -#define ENE_HW_D 3 /* 3926D */ - -#define ene_printk(level, text, ...) \ - printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__) - -struct ene_device { - struct pnp_dev *pnp_dev; - struct lirc_driver *lirc_driver; - - /* hw settings */ - unsigned long hw_io; - int irq; - - int hw_revision; /* hardware revision */ - int hw_learning_and_tx_capable; /* learning capable */ - int hw_gpio40_learning; /* gpio40 is learning */ - int hw_fan_as_normal_input; /* fan input is used as regular input */ - - /* device data */ - int idle; - int fan_input_inuse; - - int sample; - int in_use; - - struct timeval gap_start; -}; diff --git a/drivers/staging/media/lirc/lirc_igorplugusb.c b/drivers/staging/media/lirc/lirc_igorplugusb.c index 7a25017766790598f88622aa57e776581a505ea7..939a801c23e447a10c0e1ef7739e67320875549d 100644 --- a/drivers/staging/media/lirc/lirc_igorplugusb.c +++ b/drivers/staging/media/lirc/lirc_igorplugusb.c @@ -325,8 +325,8 @@ static int igorplugusb_remote_poll(void *data, struct lirc_buffer *buf) if (ret < DEVICE_HEADERLEN) return -ENODATA; - dprintk(DRIVER_NAME ": Got %d bytes. Header: %02x %02x %02x\n", - ret, ir->buf_in[0], ir->buf_in[1], ir->buf_in[2]); + dprintk(DRIVER_NAME ": Got %d bytes. Header: %*ph\n", + ret, 3, ir->buf_in); do_gettimeofday(&now); timediff = now.tv_sec - ir->last_time.tv_sec; diff --git a/drivers/staging/media/lirc/lirc_ttusbir.c b/drivers/staging/media/lirc/lirc_ttusbir.c deleted file mode 100644 index 3bb865c021737cf6d56efb583f9f7968ce2fa083..0000000000000000000000000000000000000000 --- a/drivers/staging/media/lirc/lirc_ttusbir.c +++ /dev/null @@ -1,376 +0,0 @@ -/* - * lirc_ttusbir.c - * - * lirc_ttusbir - LIRC device driver for the TechnoTrend USB IR Receiver - * - * Copyright (C) 2007 Stefan Macher - * - * This LIRC driver provides access to the TechnoTrend USB IR Receiver. - * The receiver delivers the IR signal as raw sampled true/false data in - * isochronous USB packets each of size 128 byte. - * Currently the driver reduces the sampling rate by factor of 8 as this - * is still more than enough to decode RC-5 - others should be analyzed. - * But the driver does not rely on RC-5 it should be able to decode every - * IR signal that is not too fast. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -MODULE_DESCRIPTION("TechnoTrend USB IR device driver for LIRC"); -MODULE_AUTHOR("Stefan Macher (st_maker-lirc@yahoo.de)"); -MODULE_LICENSE("GPL"); - -/* #define DEBUG */ -#ifdef DEBUG -#define DPRINTK printk -#else -#define DPRINTK(_x_, a...) -#endif - -/* function declarations */ -static int probe(struct usb_interface *intf, const struct usb_device_id *id); -static void disconnect(struct usb_interface *intf); -static void urb_complete(struct urb *urb); -static int set_use_inc(void *data); -static void set_use_dec(void *data); - -static int num_urbs = 2; -module_param(num_urbs, int, S_IRUGO); -MODULE_PARM_DESC(num_urbs, - "Number of URBs in queue. Try to increase to 4 in case " - "of problems (default: 2; minimum: 2)"); - -/* table of devices that work with this driver */ -static struct usb_device_id device_id_table[] = { - /* TechnoTrend USB IR Receiver */ - { USB_DEVICE(0x0B48, 0x2003) }, - /* Terminating entry */ - { } -}; -MODULE_DEVICE_TABLE(usb, device_id_table); - -/* USB driver definition */ -static struct usb_driver usb_driver = { - .name = "TTUSBIR", - .id_table = &(device_id_table[0]), - .probe = probe, - .disconnect = disconnect, -}; - -/* USB device definition */ -struct ttusbir_device { - struct usb_driver *usb_driver; - struct usb_device *udev; - struct usb_interface *interf; - struct usb_class_driver class_driver; - unsigned int ifnum; /* Interface number to use */ - unsigned int alt_setting; /* alternate setting to use */ - unsigned int endpoint; /* Endpoint to use */ - struct urb **urb; /* num_urb URB pointers*/ - char **buffer; /* 128 byte buffer for each URB */ - struct lirc_buffer rbuf; /* Buffer towards LIRC */ - struct lirc_driver driver; - int minor; - int last_pulse; /* remembers if last received byte was pulse or space */ - int last_num; /* remembers how many last bytes appeared */ - int opened; -}; - -/*** LIRC specific functions ***/ -static int set_use_inc(void *data) -{ - int i, retval; - struct ttusbir_device *ttusbir = data; - - DPRINTK("Sending first URBs\n"); - /* @TODO Do I need to check if I am already opened */ - ttusbir->opened = 1; - - for (i = 0; i < num_urbs; i++) { - retval = usb_submit_urb(ttusbir->urb[i], GFP_KERNEL); - if (retval) { - dev_err(&ttusbir->interf->dev, - "%s: usb_submit_urb failed on urb %d\n", - __func__, i); - return retval; - } - } - return 0; -} - -static void set_use_dec(void *data) -{ - struct ttusbir_device *ttusbir = data; - - DPRINTK("Device closed\n"); - - ttusbir->opened = 0; -} - -/*** USB specific functions ***/ - -/* - * This mapping table is used to do a very simple filtering of the - * input signal. - * For a value with at least 4 bits set it returns 0xFF otherwise - * 0x00. For faster IR signals this can not be used. But for RC-5 we - * still have about 14 samples per pulse/space, i.e. we sample with 14 - * times higher frequency than the signal frequency - */ -const unsigned char map_table[] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, - 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, - 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, - 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, - 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, - 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, - 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF -}; - -static void urb_complete(struct urb *urb) -{ - struct ttusbir_device *ttusbir; - unsigned char *buf; - int i; - int l; - - ttusbir = urb->context; - - if (!ttusbir->opened) - return; - - buf = (unsigned char *)urb->transfer_buffer; - - for (i = 0; i < 128; i++) { - /* Here we do the filtering and some kind of down sampling */ - buf[i] = ~map_table[buf[i]]; - if (ttusbir->last_pulse == buf[i]) { - if (ttusbir->last_num < PULSE_MASK/63) - ttusbir->last_num++; - /* - * else we are in a idle period and do not need to - * increment any longer - */ - } else { - l = ttusbir->last_num * 62; /* about 62 = us/byte */ - if (ttusbir->last_pulse) /* pulse or space? */ - l |= PULSE_BIT; - if (!lirc_buffer_full(&ttusbir->rbuf)) { - lirc_buffer_write(&ttusbir->rbuf, (void *)&l); - wake_up_interruptible(&ttusbir->rbuf.wait_poll); - } - ttusbir->last_num = 0; - ttusbir->last_pulse = buf[i]; - } - } - usb_submit_urb(urb, GFP_ATOMIC); /* keep data rolling :-) */ -} - -/* - * Called whenever the USB subsystem thinks we could be the right driver - * to handle this device - */ -static int probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - int alt_set, endp; - int found = 0; - int i, j; - int struct_size; - struct usb_host_interface *host_interf; - struct usb_interface_descriptor *interf_desc; - struct usb_host_endpoint *host_endpoint; - struct ttusbir_device *ttusbir; - - DPRINTK("Module ttusbir probe\n"); - - /* To reduce memory fragmentation we use only one allocation */ - struct_size = sizeof(struct ttusbir_device) + - (sizeof(struct urb *) * num_urbs) + - (sizeof(char *) * num_urbs) + - (num_urbs * 128); - ttusbir = kzalloc(struct_size, GFP_KERNEL); - if (!ttusbir) - return -ENOMEM; - - ttusbir->urb = (struct urb **)((char *)ttusbir + - sizeof(struct ttusbir_device)); - ttusbir->buffer = (char **)((char *)ttusbir->urb + - (sizeof(struct urb *) * num_urbs)); - for (i = 0; i < num_urbs; i++) - ttusbir->buffer[i] = (char *)ttusbir->buffer + - (sizeof(char *)*num_urbs) + (i * 128); - - ttusbir->usb_driver = &usb_driver; - ttusbir->alt_setting = -1; - /* @TODO check if error can be returned */ - ttusbir->udev = usb_get_dev(interface_to_usbdev(intf)); - ttusbir->interf = intf; - ttusbir->last_pulse = 0x00; - ttusbir->last_num = 0; - - /* - * Now look for interface setting we can handle - * We are searching for the alt setting where end point - * 0x82 has max packet size 16 - */ - for (alt_set = 0; alt_set < intf->num_altsetting && !found; alt_set++) { - host_interf = &intf->altsetting[alt_set]; - interf_desc = &host_interf->desc; - for (endp = 0; endp < interf_desc->bNumEndpoints; endp++) { - host_endpoint = &host_interf->endpoint[endp]; - if ((host_endpoint->desc.bEndpointAddress == 0x82) && - (host_endpoint->desc.wMaxPacketSize == 0x10)) { - ttusbir->alt_setting = alt_set; - ttusbir->endpoint = endp; - found = 1; - break; - } - } - } - if (ttusbir->alt_setting != -1) - DPRINTK("alt setting: %d\n", ttusbir->alt_setting); - else { - dev_err(&intf->dev, "Could not find alternate setting\n"); - kfree(ttusbir); - return -EINVAL; - } - - /* OK lets setup this interface setting */ - usb_set_interface(ttusbir->udev, 0, ttusbir->alt_setting); - - /* Store device info in interface structure */ - usb_set_intfdata(intf, ttusbir); - - /* Register as a LIRC driver */ - if (lirc_buffer_init(&ttusbir->rbuf, sizeof(int), 256) < 0) { - dev_err(&intf->dev, "Could not get memory for LIRC data buffer\n"); - usb_set_intfdata(intf, NULL); - kfree(ttusbir); - return -ENOMEM; - } - strcpy(ttusbir->driver.name, "TTUSBIR"); - ttusbir->driver.minor = -1; - ttusbir->driver.code_length = 1; - ttusbir->driver.sample_rate = 0; - ttusbir->driver.data = ttusbir; - ttusbir->driver.add_to_buf = NULL; - ttusbir->driver.rbuf = &ttusbir->rbuf; - ttusbir->driver.set_use_inc = set_use_inc; - ttusbir->driver.set_use_dec = set_use_dec; - ttusbir->driver.dev = &intf->dev; - ttusbir->driver.owner = THIS_MODULE; - ttusbir->driver.features = LIRC_CAN_REC_MODE2; - ttusbir->minor = lirc_register_driver(&ttusbir->driver); - if (ttusbir->minor < 0) { - dev_err(&intf->dev, "Error registering as LIRC driver\n"); - usb_set_intfdata(intf, NULL); - lirc_buffer_free(&ttusbir->rbuf); - kfree(ttusbir); - return -EIO; - } - - /* Allocate and setup the URB that we will use to talk to the device */ - for (i = 0; i < num_urbs; i++) { - ttusbir->urb[i] = usb_alloc_urb(8, GFP_KERNEL); - if (!ttusbir->urb[i]) { - dev_err(&intf->dev, "Could not allocate memory for the URB\n"); - for (j = i - 1; j >= 0; j--) - kfree(ttusbir->urb[j]); - lirc_buffer_free(&ttusbir->rbuf); - lirc_unregister_driver(ttusbir->minor); - kfree(ttusbir); - usb_set_intfdata(intf, NULL); - return -ENOMEM; - } - ttusbir->urb[i]->dev = ttusbir->udev; - ttusbir->urb[i]->context = ttusbir; - ttusbir->urb[i]->pipe = usb_rcvisocpipe(ttusbir->udev, - ttusbir->endpoint); - ttusbir->urb[i]->interval = 1; - ttusbir->urb[i]->transfer_flags = URB_ISO_ASAP; - ttusbir->urb[i]->transfer_buffer = &ttusbir->buffer[i][0]; - ttusbir->urb[i]->complete = urb_complete; - ttusbir->urb[i]->number_of_packets = 8; - ttusbir->urb[i]->transfer_buffer_length = 128; - for (j = 0; j < 8; j++) { - ttusbir->urb[i]->iso_frame_desc[j].offset = j*16; - ttusbir->urb[i]->iso_frame_desc[j].length = 16; - } - } - return 0; -} - -/** - * Called when the driver is unloaded or the device is unplugged - */ -static void disconnect(struct usb_interface *intf) -{ - int i; - struct ttusbir_device *ttusbir; - - DPRINTK("Module ttusbir disconnect\n"); - - ttusbir = (struct ttusbir_device *) usb_get_intfdata(intf); - usb_set_intfdata(intf, NULL); - lirc_unregister_driver(ttusbir->minor); - DPRINTK("unregistered\n"); - - for (i = 0; i < num_urbs; i++) { - usb_kill_urb(ttusbir->urb[i]); - usb_free_urb(ttusbir->urb[i]); - } - DPRINTK("URBs killed\n"); - lirc_buffer_free(&ttusbir->rbuf); - kfree(ttusbir); -} - -module_usb_driver(usb_driver); diff --git a/drivers/staging/media/lirc/lirc_zilog.c b/drivers/staging/media/lirc/lirc_zilog.c index 76ea4a8f2c751a865bce422d50da43dbf940880c..11d5338b4f2ffaa458ddc6729a5ea48298e17227 100644 --- a/drivers/staging/media/lirc/lirc_zilog.c +++ b/drivers/staging/media/lirc/lirc_zilog.c @@ -658,8 +658,7 @@ static int send_data_block(struct IR_tx *tx, unsigned char *data_block) buf[0] = (unsigned char)(i + 1); for (j = 0; j < tosend; ++j) buf[1 + j] = data_block[i + j]; - dprintk("%02x %02x %02x %02x %02x", - buf[0], buf[1], buf[2], buf[3], buf[4]); + dprintk("%*ph", 5, buf); ret = i2c_master_send(tx->c, buf, tosend + 1); if (ret != tosend + 1) { zilog_error("i2c_master_send failed with %d\n", ret); diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index 695ea35f75b0831cc8e2d28369d9ef124f8c2da9..d0a7e408efe93847606d1db21397fab44aba1ae6 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -837,7 +837,7 @@ static int __devinit tegra_nvec_probe(struct platform_device *pdev) } ret = mfd_add_devices(nvec->dev, -1, nvec_devices, - ARRAY_SIZE(nvec_devices), base, 0); + ARRAY_SIZE(nvec_devices), base, 0, NULL); if (ret) dev_err(nvec->dev, "error adding subdevices\n"); diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c index 992275c0d87cfa7dcc736fbd7f2d2396274049f7..2c4bd746715acb99fe5dbfc05193d546ccc82808 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.c +++ b/drivers/staging/olpc_dcon/olpc_dcon.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include diff --git a/drivers/staging/omapdrm/omap_connector.c b/drivers/staging/omapdrm/omap_connector.c index 5e2856c0e0bbf3ead714ca105d06e54e1dff1545..55e9c865585058e9195e3eeef9aa8c554b57c886 100644 --- a/drivers/staging/omapdrm/omap_connector.c +++ b/drivers/staging/omapdrm/omap_connector.c @@ -48,13 +48,20 @@ static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode, mode->vsync_end = mode->vsync_start + timings->vsw; mode->vtotal = mode->vsync_end + timings->vbp; - /* note: whether or not it is interlaced, +/- h/vsync, etc, - * which should be set in the mode flags, is not exposed in - * the omap_video_timings struct.. but hdmi driver tracks - * those separately so all we have to have to set the mode - * is the way to recover these timings values, and the - * omap_dss_driver would do the rest. - */ + mode->flags = 0; + + if (timings->interlace) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + + if (timings->hsync_level == OMAPDSS_SIG_ACTIVE_HIGH) + mode->flags |= DRM_MODE_FLAG_PHSYNC; + else + mode->flags |= DRM_MODE_FLAG_NHSYNC; + + if (timings->vsync_level == OMAPDSS_SIG_ACTIVE_HIGH) + mode->flags |= DRM_MODE_FLAG_PVSYNC; + else + mode->flags |= DRM_MODE_FLAG_NVSYNC; } static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, @@ -71,6 +78,22 @@ static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, timings->vfp = mode->vsync_start - mode->vdisplay; timings->vsw = mode->vsync_end - mode->vsync_start; timings->vbp = mode->vtotal - mode->vsync_end; + + timings->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); + + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + timings->hsync_level = OMAPDSS_SIG_ACTIVE_HIGH; + else + timings->hsync_level = OMAPDSS_SIG_ACTIVE_LOW; + + if (mode->flags & DRM_MODE_FLAG_PVSYNC) + timings->vsync_level = OMAPDSS_SIG_ACTIVE_HIGH; + else + timings->vsync_level = OMAPDSS_SIG_ACTIVE_LOW; + + timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE; + timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH; + timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES; } static void omap_connector_dpms(struct drm_connector *connector, int mode) @@ -187,7 +210,7 @@ static int omap_connector_get_modes(struct drm_connector *connector) } } else { struct drm_display_mode *mode = drm_mode_create(dev); - struct omap_video_timings timings; + struct omap_video_timings timings = {0}; dssdrv->get_timings(dssdev, &timings); @@ -291,7 +314,7 @@ void omap_connector_mode_set(struct drm_connector *connector, struct omap_connector *omap_connector = to_omap_connector(connector); struct omap_dss_device *dssdev = omap_connector->dssdev; struct omap_dss_driver *dssdrv = dssdev->driver; - struct omap_video_timings timings; + struct omap_video_timings timings = {0}; copy_timings_drm_to_omap(&timings, mode); diff --git a/drivers/staging/ozwpan/ozcdev.c b/drivers/staging/ozwpan/ozcdev.c index d98321945802c8daf8ec71cc3908ec0c44133c7a..758ce0a8d82e03c59d326b5ce0f6b8bdda425b25 100644 --- a/drivers/staging/ozwpan/ozcdev.c +++ b/drivers/staging/ozwpan/ozcdev.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include "ozconfig.h" @@ -213,7 +214,7 @@ static int oz_set_active_pd(u8 *addr) if (old_pd) oz_pd_put(old_pd); } else { - if (!memcmp(addr, "\0\0\0\0\0\0", sizeof(addr))) { + if (is_zero_ether_addr(addr)) { spin_lock_bh(&g_cdev.lock); pd = g_cdev.active_pd; g_cdev.active_pd = 0; diff --git a/drivers/staging/rtl8712/recv_linux.c b/drivers/staging/rtl8712/recv_linux.c index 0e26d5f6cf2d57d64eca7d5440af7da0f77443cd..495ee1205e02a9c77aa59a1e7ec5da1cf255d534 100644 --- a/drivers/staging/rtl8712/recv_linux.c +++ b/drivers/staging/rtl8712/recv_linux.c @@ -117,13 +117,8 @@ void r8712_recv_indicatepkt(struct _adapter *padapter, if (skb == NULL) goto _recv_indicatepkt_drop; skb->data = precv_frame->u.hdr.rx_data; -#ifdef NET_SKBUFF_DATA_USES_OFFSET - skb->tail = (sk_buff_data_t)(precv_frame->u.hdr.rx_tail - - precv_frame->u.hdr.rx_head); -#else - skb->tail = (sk_buff_data_t)precv_frame->u.hdr.rx_tail; -#endif skb->len = precv_frame->u.hdr.len; + skb_set_tail_pointer(skb, skb->len); if ((pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1)) skb->ip_summed = CHECKSUM_UNNECESSARY; else diff --git a/drivers/staging/vt6656/dpc.c b/drivers/staging/vt6656/dpc.c index e4bdf2a2b5829292e23d8f4675fab023249e16d3..3aa895ec6507f7dde81f1440b4af349e792dc1cd 100644 --- a/drivers/staging/vt6656/dpc.c +++ b/drivers/staging/vt6656/dpc.c @@ -200,7 +200,7 @@ s_vProcessRxMACHeader ( } else if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) { cbHeaderSize += 6; pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize); - if ((*pwType == cpu_to_le16(ETH_P_IPX)) || + if ((*pwType == cpu_to_be16(ETH_P_IPX)) || (*pwType == cpu_to_le16(0xF380))) { cbHeaderSize -= 8; pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize); diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c index b06fd5b723fa5cb693fd860c43e9232395c57bad..d536756549e684479ac067e5b2caea8832245e9e 100644 --- a/drivers/staging/vt6656/main_usb.c +++ b/drivers/staging/vt6656/main_usb.c @@ -189,7 +189,7 @@ DEVICE_PARAM(b80211hEnable, "802.11h mode"); // Static vars definitions // -static struct usb_device_id vt6656_table[] __devinitdata = { +static struct usb_device_id vt6656_table[] = { {USB_DEVICE(VNT_USB_VENDOR_ID, VNT_USB_PRODUCT_ID)}, {} }; diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c index bb464527fc1b06e8814b05c23c97e89208cda92e..b6e04e7b629bdc0a63a04ac4f47698abed3cece8 100644 --- a/drivers/staging/vt6656/rxtx.c +++ b/drivers/staging/vt6656/rxtx.c @@ -1699,7 +1699,7 @@ s_bPacketToWirelessUsb( // 802.1H if (ntohs(psEthHeader->wType) > ETH_DATA_LEN) { if (pDevice->dwDiagRefCount == 0) { - if ((psEthHeader->wType == cpu_to_le16(ETH_P_IPX)) || + if ((psEthHeader->wType == cpu_to_be16(ETH_P_IPX)) || (psEthHeader->wType == cpu_to_le16(0xF380))) { memcpy((PBYTE) (pbyPayloadHead), abySNAP_Bridgetunnel, 6); @@ -2838,10 +2838,10 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb) Packet_Type = skb->data[ETH_HLEN+1]; Descriptor_type = skb->data[ETH_HLEN+1+1+2]; Key_info = (skb->data[ETH_HLEN+1+1+2+1] << 8)|(skb->data[ETH_HLEN+1+1+2+2]); - if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) { - /* 802.1x OR eapol-key challenge frame transfer */ - if (((Protocol_Version == 1) || (Protocol_Version == 2)) && - (Packet_Type == 3)) { + if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) { + /* 802.1x OR eapol-key challenge frame transfer */ + if (((Protocol_Version == 1) || (Protocol_Version == 2)) && + (Packet_Type == 3)) { bTxeapol_key = TRUE; if(!(Key_info & BIT3) && //WPA or RSN group-key challenge (Key_info & BIT8) && (Key_info & BIT9)) { //send 2/2 key @@ -2987,19 +2987,19 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb) } } - if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) { - if (pDevice->byBBType != BB_TYPE_11A) { - pDevice->wCurrentRate = RATE_1M; - pDevice->byACKRate = RATE_1M; - pDevice->byTopCCKBasicRate = RATE_1M; - pDevice->byTopOFDMBasicRate = RATE_6M; - } else { - pDevice->wCurrentRate = RATE_6M; - pDevice->byACKRate = RATE_6M; - pDevice->byTopCCKBasicRate = RATE_1M; - pDevice->byTopOFDMBasicRate = RATE_6M; - } - } + if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) { + if (pDevice->byBBType != BB_TYPE_11A) { + pDevice->wCurrentRate = RATE_1M; + pDevice->byACKRate = RATE_1M; + pDevice->byTopCCKBasicRate = RATE_1M; + pDevice->byTopOFDMBasicRate = RATE_6M; + } else { + pDevice->wCurrentRate = RATE_6M; + pDevice->byACKRate = RATE_6M; + pDevice->byTopCCKBasicRate = RATE_1M; + pDevice->byTopOFDMBasicRate = RATE_6M; + } + } DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dma_tx: pDevice->wCurrentRate = %d\n", @@ -3015,7 +3015,7 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb) if (bNeedEncryption == TRUE) { DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ntohs Pkt Type=%04x\n", ntohs(pDevice->sTxEthHeader.wType)); - if ((pDevice->sTxEthHeader.wType) == cpu_to_le16(ETH_P_PAE)) { + if ((pDevice->sTxEthHeader.wType) == cpu_to_be16(ETH_P_PAE)) { bNeedEncryption = FALSE; DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Pkt Type=%04x\n", (pDevice->sTxEthHeader.wType)); if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_ASSOC)) { diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index ef360547ececf262841ad46068028fb7fd40f4d2..0ca857ac473e91e3171c0963f85a4be214b64947 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -25,7 +25,7 @@ MODULE_DESCRIPTION("IS89C35 802.11bg WLAN USB Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION("0.1"); -static const struct usb_device_id wb35_table[] __devinitconst = { +static const struct usb_device_id wb35_table[] = { { USB_DEVICE(0x0416, 0x0035) }, { USB_DEVICE(0x18E8, 0x6201) }, { USB_DEVICE(0x18E8, 0x6206) }, diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c index fabff4d650ef8c5645ed26dfeb5a46e452d26c05..0970127344e60828e569e1ca87ee6c82cb3f11eb 100644 --- a/drivers/staging/wlan-ng/cfg80211.c +++ b/drivers/staging/wlan-ng/cfg80211.c @@ -327,9 +327,9 @@ int prism2_get_station(struct wiphy *wiphy, struct net_device *dev, return result; } -int prism2_scan(struct wiphy *wiphy, struct net_device *dev, - struct cfg80211_scan_request *request) +int prism2_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request) { + struct net_device *dev = request->wdev->netdev; struct prism2_wiphy_private *priv = wiphy_priv(wiphy); wlandevice_t *wlandev = dev->ml_priv; struct p80211msg_dot11req_scan msg1; diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c index c214977b4ab48adec84fc260df0116b12b498aa7..52b43b7b83d7b3c9d7e3acfc853912afc64c2b61 100644 --- a/drivers/staging/zcache/zcache-main.c +++ b/drivers/staging/zcache/zcache-main.c @@ -1251,13 +1251,12 @@ static int zcache_pampd_get_data_and_free(char *data, size_t *bufsize, bool raw, void *pampd, struct tmem_pool *pool, struct tmem_oid *oid, uint32_t index) { - int ret = 0; - BUG_ON(!is_ephemeral(pool)); - zbud_decompress((struct page *)(data), pampd); + if (zbud_decompress((struct page *)(data), pampd) < 0) + return -EINVAL; zbud_free_and_delist((struct zbud_hdr *)pampd); atomic_dec(&zcache_curr_eph_pampd_count); - return ret; + return 0; } /* diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index 0694d9b1bce6a4e066a7bba1b1ef5f870b4b51d7..6aba4395e8d8ffd5aa950c4dfc745791c3f65fc2 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -221,6 +221,7 @@ static int iscsi_login_zero_tsih_s1( { struct iscsi_session *sess = NULL; struct iscsi_login_req *pdu = (struct iscsi_login_req *)buf; + int ret; sess = kzalloc(sizeof(struct iscsi_session), GFP_KERNEL); if (!sess) { @@ -257,9 +258,17 @@ static int iscsi_login_zero_tsih_s1( return -ENOMEM; } spin_lock(&sess_idr_lock); - idr_get_new(&sess_idr, NULL, &sess->session_index); + ret = idr_get_new(&sess_idr, NULL, &sess->session_index); spin_unlock(&sess_idr_lock); + if (ret < 0) { + pr_err("idr_get_new() for sess_idr failed\n"); + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_NO_RESOURCES); + kfree(sess); + return -ENOMEM; + } + sess->creation_time = get_jiffies_64(); spin_lock_init(&sess->session_stats_lock); /* diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 91799973081a3d907cd260792df3f573d1dbec82..41641ba548286e9dbf33f45a02ece5b20eec0d14 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -218,6 +218,13 @@ int target_emulate_set_target_port_groups(struct se_cmd *cmd) cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return -EINVAL; } + if (cmd->data_length < 4) { + pr_warn("SET TARGET PORT GROUPS parameter list length %u too" + " small\n", cmd->data_length); + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; + } + buf = transport_kmap_data_sg(cmd); /* diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index cf2c66f3c11690c81ca23e9fd2ce286e76b56e62..9fc9a6006ca082076a6d235dfad676e1e1a11ea9 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -669,6 +669,13 @@ int target_report_luns(struct se_cmd *se_cmd) unsigned char *buf; u32 lun_count = 0, offset = 8, i; + if (se_cmd->data_length < 16) { + pr_warn("REPORT LUNS allocation length %u too small\n", + se_cmd->data_length); + se_cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; + } + buf = transport_kmap_data_sg(se_cmd); if (!buf) return -ENOMEM; diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 9e2100551c789f70b033e420d0840b1f2e340f5d..cbb5aaf3e567f5d52f552cc940f3e9556ac8ee40 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -109,46 +109,29 @@ static struct se_device *fd_create_virtdevice( struct se_subsystem_dev *se_dev, void *p) { - char *dev_p = NULL; struct se_device *dev; struct se_dev_limits dev_limits; struct queue_limits *limits; struct fd_dev *fd_dev = p; struct fd_host *fd_host = hba->hba_ptr; - mm_segment_t old_fs; struct file *file; struct inode *inode = NULL; int dev_flags = 0, flags, ret = -EINVAL; memset(&dev_limits, 0, sizeof(struct se_dev_limits)); - old_fs = get_fs(); - set_fs(get_ds()); - dev_p = getname(fd_dev->fd_dev_name); - set_fs(old_fs); - - if (IS_ERR(dev_p)) { - pr_err("getname(%s) failed: %lu\n", - fd_dev->fd_dev_name, IS_ERR(dev_p)); - ret = PTR_ERR(dev_p); - goto fail; - } /* * Use O_DSYNC by default instead of O_SYNC to forgo syncing * of pure timestamp updates. */ flags = O_RDWR | O_CREAT | O_LARGEFILE | O_DSYNC; - file = filp_open(dev_p, flags, 0600); + file = filp_open(fd_dev->fd_dev_name, flags, 0600); if (IS_ERR(file)) { - pr_err("filp_open(%s) failed\n", dev_p); + pr_err("filp_open(%s) failed\n", fd_dev->fd_dev_name); ret = PTR_ERR(file); goto fail; } - if (!file || !file->f_dentry) { - pr_err("filp_open(%s) failed\n", dev_p); - goto fail; - } fd_dev->fd_file = file; /* * If using a block backend with this struct file, we extract @@ -212,14 +195,12 @@ static struct se_device *fd_create_virtdevice( " %llu total bytes\n", fd_host->fd_host_id, fd_dev->fd_dev_id, fd_dev->fd_dev_name, fd_dev->fd_dev_size); - putname(dev_p); return dev; fail: if (fd_dev->fd_file) { filp_close(fd_dev->fd_file, NULL); fd_dev->fd_file = NULL; } - putname(dev_p); return ERR_PTR(ret); } @@ -452,14 +433,11 @@ static ssize_t fd_set_configfs_dev_params( token = match_token(ptr, tokens, args); switch (token) { case Opt_fd_dev_name: - arg_p = match_strdup(&args[0]); - if (!arg_p) { - ret = -ENOMEM; + if (match_strlcpy(fd_dev->fd_dev_name, &args[0], + FD_MAX_DEV_NAME) == 0) { + ret = -EINVAL; break; } - snprintf(fd_dev->fd_dev_name, FD_MAX_DEV_NAME, - "%s", arg_p); - kfree(arg_p); pr_debug("FILEIO: Referencing Path: %s\n", fd_dev->fd_dev_name); fd_dev->fbd_flags |= FBDF_HAS_PATH; diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index 76db75e836ede701c2aed6090a212fdf1a08ad10..9ba495477fd24f80bf6643cfae3707525b7c165e 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -325,17 +325,30 @@ static int iblock_execute_unmap(struct se_cmd *cmd) struct iblock_dev *ibd = dev->dev_ptr; unsigned char *buf, *ptr = NULL; sector_t lba; - int size = cmd->data_length; + int size; u32 range; int ret = 0; int dl, bd_dl; + if (cmd->data_length < 8) { + pr_warn("UNMAP parameter list length %u too small\n", + cmd->data_length); + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; + } + buf = transport_kmap_data_sg(cmd); dl = get_unaligned_be16(&buf[0]); bd_dl = get_unaligned_be16(&buf[2]); - size = min(size - 8, bd_dl); + size = cmd->data_length - 8; + if (bd_dl > size) + pr_warn("UNMAP parameter list length %u too small, ignoring bd_dl %u\n", + cmd->data_length, bd_dl); + else + size = bd_dl; + if (size / 16 > dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; ret = -EINVAL; diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 1e946502c378886aa90bafc16239d2c34730b9fb..956c84c6b666498caabf7b60b7404413698c0b14 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -1540,6 +1540,14 @@ static int core_scsi3_decode_spec_i_port( tidh_new->dest_local_nexus = 1; list_add_tail(&tidh_new->dest_list, &tid_dest_list); + if (cmd->data_length < 28) { + pr_warn("SPC-PR: Received PR OUT parameter list" + " length too small: %u\n", cmd->data_length); + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; + goto out; + } + buf = transport_kmap_data_sg(cmd); /* * For a PERSISTENT RESERVE OUT specify initiator ports payload, diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 6e32ff6f2fa0ce4ead43073d87bedc77d3ffee2c..9d7ce3daa26275a7c08b831ae9b955382e0e9103 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -667,24 +667,32 @@ static void pscsi_free_device(void *p) kfree(pdv); } -static int pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg) +static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg, + unsigned char *sense_buffer) { struct pscsi_dev_virt *pdv = cmd->se_dev->dev_ptr; struct scsi_device *sd = pdv->pdv_sd; int result; struct pscsi_plugin_task *pt = cmd->priv; - unsigned char *cdb = &pt->pscsi_cdb[0]; + unsigned char *cdb; + /* + * Special case for REPORT_LUNs handling where pscsi_plugin_task has + * not been allocated because TCM is handling the emulation directly. + */ + if (!pt) + return; + cdb = &pt->pscsi_cdb[0]; result = pt->pscsi_result; /* * Hack to make sure that Write-Protect modepage is set if R/O mode is * forced. */ + if (!cmd->se_deve || !cmd->data_length) + goto after_mode_sense; + if (((cdb[0] == MODE_SENSE) || (cdb[0] == MODE_SENSE_10)) && (status_byte(result) << 1) == SAM_STAT_GOOD) { - if (!cmd->se_deve) - goto after_mode_sense; - if (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY) { unsigned char *buf = transport_kmap_data_sg(cmd); @@ -701,7 +709,7 @@ static int pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg) } after_mode_sense: - if (sd->type != TYPE_TAPE) + if (sd->type != TYPE_TAPE || !cmd->data_length) goto after_mode_select; /* @@ -743,10 +751,10 @@ static int pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg) } after_mode_select: - if (status_byte(result) & CHECK_CONDITION) - return 1; - - return 0; + if (sense_buffer && (status_byte(result) & CHECK_CONDITION)) { + memcpy(sense_buffer, pt->pscsi_sense, TRANSPORT_SENSE_BUFFER); + cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE; + } } enum { @@ -1177,13 +1185,6 @@ static int pscsi_execute_cmd(struct se_cmd *cmd) return -ENOMEM; } -static unsigned char *pscsi_get_sense_buffer(struct se_cmd *cmd) -{ - struct pscsi_plugin_task *pt = cmd->priv; - - return pt->pscsi_sense; -} - /* pscsi_get_device_rev(): * * @@ -1266,7 +1267,6 @@ static struct se_subsystem_api pscsi_template = { .check_configfs_dev_params = pscsi_check_configfs_dev_params, .set_configfs_dev_params = pscsi_set_configfs_dev_params, .show_configfs_dev_params = pscsi_show_configfs_dev_params, - .get_sense_buffer = pscsi_get_sense_buffer, .get_device_rev = pscsi_get_device_rev, .get_device_type = pscsi_get_device_type, .get_blocks = pscsi_get_blocks, diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c index 4c861de538c9ddb627356e8aa3ea992b164033cf..388a922c8f6de8f4f2a18f7bea85f5b3590b41a9 100644 --- a/drivers/target/target_core_spc.c +++ b/drivers/target/target_core_spc.c @@ -877,9 +877,11 @@ static int spc_emulate_modesense(struct se_cmd *cmd) static int spc_emulate_request_sense(struct se_cmd *cmd) { unsigned char *cdb = cmd->t_task_cdb; - unsigned char *buf; + unsigned char *rbuf; u8 ua_asc = 0, ua_ascq = 0; - int err = 0; + unsigned char buf[SE_SENSE_BUF]; + + memset(buf, 0, SE_SENSE_BUF); if (cdb[1] & 0x01) { pr_err("REQUEST_SENSE description emulation not" @@ -888,20 +890,21 @@ static int spc_emulate_request_sense(struct se_cmd *cmd) return -ENOSYS; } - buf = transport_kmap_data_sg(cmd); - - if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { + rbuf = transport_kmap_data_sg(cmd); + if (cmd->scsi_sense_reason != 0) { + /* + * Out of memory. We will fail with CHECK CONDITION, so + * we must not clear the unit attention condition. + */ + target_complete_cmd(cmd, CHECK_CONDITION); + return 0; + } else if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { /* * CURRENT ERROR, UNIT ATTENTION */ buf[0] = 0x70; buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION; - if (cmd->data_length < 18) { - buf[7] = 0x00; - err = -EINVAL; - goto end; - } /* * The Additional Sense Code (ASC) from the UNIT ATTENTION */ @@ -915,11 +918,6 @@ static int spc_emulate_request_sense(struct se_cmd *cmd) buf[0] = 0x70; buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE; - if (cmd->data_length < 18) { - buf[7] = 0x00; - err = -EINVAL; - goto end; - } /* * NO ADDITIONAL SENSE INFORMATION */ @@ -927,8 +925,11 @@ static int spc_emulate_request_sense(struct se_cmd *cmd) buf[7] = 0x0A; } -end: - transport_kunmap_data_sg(cmd); + if (rbuf) { + memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length)); + transport_kunmap_data_sg(cmd); + } + target_complete_cmd(cmd, GOOD); return 0; } diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 0eaae23d12b576547fa51f25ed8f05579f6ec646..269f54488397bd2193bb80869bf9de8ac4c73bf2 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -567,6 +567,34 @@ static void target_complete_failure_work(struct work_struct *work) transport_generic_request_failure(cmd); } +/* + * Used when asking transport to copy Sense Data from the underlying + * Linux/SCSI struct scsi_cmnd + */ +static unsigned char *transport_get_sense_buffer(struct se_cmd *cmd) +{ + unsigned char *buffer = cmd->sense_buffer; + struct se_device *dev = cmd->se_dev; + u32 offset = 0; + + WARN_ON(!cmd->se_lun); + + if (!dev) + return NULL; + + if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) + return NULL; + + offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER); + + /* Automatically padded */ + cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset; + + pr_debug("HBA_[%u]_PLUG[%s]: Requesting sense for SAM STATUS: 0x%02x\n", + dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status); + return &buffer[offset]; +} + void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status) { struct se_device *dev = cmd->se_dev; @@ -580,11 +608,11 @@ void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status) cmd->transport_state &= ~CMD_T_BUSY; if (dev && dev->transport->transport_complete) { - if (dev->transport->transport_complete(cmd, - cmd->t_data_sg) != 0) { - cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE; + dev->transport->transport_complete(cmd, + cmd->t_data_sg, + transport_get_sense_buffer(cmd)); + if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) success = 1; - } } /* @@ -1165,8 +1193,6 @@ int target_cmd_size_check(struct se_cmd *cmd, unsigned int size) " 0x%02x\n", cmd->se_tfo->get_fabric_name(), cmd->data_length, size, cmd->t_task_cdb[0]); - cmd->cmd_spdtl = size; - if (cmd->data_direction == DMA_TO_DEVICE) { pr_err("Rejecting underflow/overflow" " WRITE data\n"); @@ -1183,15 +1209,20 @@ int target_cmd_size_check(struct se_cmd *cmd, unsigned int size) /* Returns CHECK_CONDITION + INVALID_CDB_FIELD */ goto out_invalid_cdb_field; } - + /* + * For the overflow case keep the existing fabric provided + * ->data_length. Otherwise for the underflow case, reset + * ->data_length to the smaller SCSI expected data transfer + * length. + */ if (size > cmd->data_length) { cmd->se_cmd_flags |= SCF_OVERFLOW_BIT; cmd->residual_count = (size - cmd->data_length); } else { cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT; cmd->residual_count = (cmd->data_length - size); + cmd->data_length = size; } - cmd->data_length = size; } return 0; @@ -1817,61 +1848,6 @@ void target_execute_cmd(struct se_cmd *cmd) } EXPORT_SYMBOL(target_execute_cmd); -/* - * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd - */ -static int transport_get_sense_data(struct se_cmd *cmd) -{ - unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL; - struct se_device *dev = cmd->se_dev; - unsigned long flags; - u32 offset = 0; - - WARN_ON(!cmd->se_lun); - - if (!dev) - return 0; - - spin_lock_irqsave(&cmd->t_state_lock, flags); - if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return 0; - } - - if (!(cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE)) - goto out; - - if (!dev->transport->get_sense_buffer) { - pr_err("dev->transport->get_sense_buffer is NULL\n"); - goto out; - } - - sense_buffer = dev->transport->get_sense_buffer(cmd); - if (!sense_buffer) { - pr_err("ITT 0x%08x cmd %p: Unable to locate" - " sense buffer for task with sense\n", - cmd->se_tfo->get_task_tag(cmd), cmd); - goto out; - } - - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - - offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER); - - memcpy(&buffer[offset], sense_buffer, TRANSPORT_SENSE_BUFFER); - - /* Automatically padded */ - cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset; - - pr_debug("HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x and sense\n", - dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status); - return 0; - -out: - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return -1; -} - /* * Process all commands up to the last received ORDERED task attribute which * requires another blocking boundary @@ -1987,7 +1963,7 @@ static void transport_handle_queue_full( static void target_complete_ok_work(struct work_struct *work) { struct se_cmd *cmd = container_of(work, struct se_cmd, work); - int reason = 0, ret; + int ret; /* * Check if we need to move delayed/dormant tasks from cmds on the @@ -2004,23 +1980,19 @@ static void target_complete_ok_work(struct work_struct *work) schedule_work(&cmd->se_dev->qf_work_queue); /* - * Check if we need to retrieve a sense buffer from + * Check if we need to send a sense buffer from * the struct se_cmd in question. */ if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) { - if (transport_get_sense_data(cmd) < 0) - reason = TCM_NON_EXISTENT_LUN; - - if (cmd->scsi_status) { - ret = transport_send_check_condition_and_sense( - cmd, reason, 1); - if (ret == -EAGAIN || ret == -ENOMEM) - goto queue_full; + WARN_ON(!cmd->scsi_status); + ret = transport_send_check_condition_and_sense( + cmd, 0, 1); + if (ret == -EAGAIN || ret == -ENOMEM) + goto queue_full; - transport_lun_remove_cmd(cmd); - transport_cmd_check_stop_to_fabric(cmd); - return; - } + transport_lun_remove_cmd(cmd); + transport_cmd_check_stop_to_fabric(cmd); + return; } /* * Check for a callback, used by amongst other things @@ -2218,7 +2190,6 @@ void *transport_kmap_data_sg(struct se_cmd *cmd) struct page **pages; int i; - BUG_ON(!sg); /* * We need to take into account a possible offset here for fabrics like * tcm_loop who may be using a contig buffer from the SCSI midlayer for @@ -2226,13 +2197,17 @@ void *transport_kmap_data_sg(struct se_cmd *cmd) */ if (!cmd->t_data_nents) return NULL; - else if (cmd->t_data_nents == 1) + + BUG_ON(!sg); + if (cmd->t_data_nents == 1) return kmap(sg_page(sg)) + sg->offset; /* >1 page. use vmap */ pages = kmalloc(sizeof(*pages) * cmd->t_data_nents, GFP_KERNEL); - if (!pages) + if (!pages) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return NULL; + } /* convert sg[] to pages[] */ for_each_sg(cmd->t_data_sg, sg, cmd->t_data_nents, i) { @@ -2241,8 +2216,10 @@ void *transport_kmap_data_sg(struct se_cmd *cmd) cmd->t_data_vmap = vmap(pages, cmd->t_data_nents, VM_MAP, PAGE_KERNEL); kfree(pages); - if (!cmd->t_data_vmap) + if (!cmd->t_data_vmap) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return NULL; + } return cmd->t_data_vmap + cmd->t_data_sg[0].offset; } @@ -2294,9 +2271,9 @@ transport_generic_get_mem(struct se_cmd *cmd) return 0; out: - while (i >= 0) { - __free_page(sg_page(&cmd->t_data_sg[i])); + while (i > 0) { i--; + __free_page(sg_page(&cmd->t_data_sg[i])); } kfree(cmd->t_data_sg); cmd->t_data_sg = NULL; @@ -2323,21 +2300,19 @@ int transport_generic_new_cmd(struct se_cmd *cmd) if (ret < 0) goto out_fail; } - - /* Workaround for handling zero-length control CDBs */ - if (!(cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) && !cmd->data_length) { + /* + * If this command doesn't have any payload and we don't have to call + * into the fabric for data transfers, go ahead and complete it right + * away. + */ + if (!cmd->data_length && + cmd->t_task_cdb[0] != REQUEST_SENSE && + cmd->se_dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV) { spin_lock_irq(&cmd->t_state_lock); cmd->t_state = TRANSPORT_COMPLETE; cmd->transport_state |= CMD_T_ACTIVE; spin_unlock_irq(&cmd->t_state_lock); - if (cmd->t_task_cdb[0] == REQUEST_SENSE) { - u8 ua_asc = 0, ua_ascq = 0; - - core_scsi3_ua_clear_for_request_sense(cmd, - &ua_asc, &ua_ascq); - } - INIT_WORK(&cmd->work, target_complete_ok_work); queue_work(target_completion_wq, &cmd->work); return 0; diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h index c5eb3c33c3dbed83db4b647c07619e44f320659f..eea69358ced3a5c8eec138eb403b2347905c801e 100644 --- a/drivers/target/tcm_fc/tcm_fc.h +++ b/drivers/target/tcm_fc/tcm_fc.h @@ -131,6 +131,7 @@ extern struct list_head ft_lport_list; extern struct mutex ft_lport_lock; extern struct fc4_prov ft_prov; extern struct target_fabric_configfs *ft_configfs; +extern unsigned int ft_debug_logging; /* * Fabric methods. diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index b9cb5006177e22166732032468bf8d0a733299f8..823e6922249d07e3122973ebdb370cd4994704a0 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -48,7 +48,7 @@ /* * Dump cmd state for debugging. */ -void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) +static void _ft_dump_cmd(struct ft_cmd *cmd, const char *caller) { struct fc_exch *ep; struct fc_seq *sp; @@ -80,6 +80,12 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) } } +void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) +{ + if (unlikely(ft_debug_logging)) + _ft_dump_cmd(cmd, caller); +} + static void ft_free_cmd(struct ft_cmd *cmd) { struct fc_frame *fp; diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c index 87901fa74dd7e1acb136cbdf0607aa4b8eeeb652..3c9e5b57caabea23567192e2d2f85843ca6bc70f 100644 --- a/drivers/target/tcm_fc/tfc_sess.c +++ b/drivers/target/tcm_fc/tfc_sess.c @@ -456,7 +456,9 @@ static void ft_prlo(struct fc_rport_priv *rdata) struct ft_tport *tport; mutex_lock(&ft_lport_lock); - tport = rcu_dereference(rdata->local_port->prov[FC_TYPE_FCP]); + tport = rcu_dereference_protected(rdata->local_port->prov[FC_TYPE_FCP], + lockdep_is_held(&ft_lport_lock)); + if (!tport) { mutex_unlock(&ft_lport_lock); return; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 070b442c1f81abb08ffee6cd69e3ffe0ab87b209..4720b4ba096a5d7b2efc6cca8aca82dd75c127e2 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -160,10 +160,12 @@ config SERIAL_KS8695_CONSOLE config SERIAL_CLPS711X tristate "CLPS711X serial port support" - depends on ARM && ARCH_CLPS711X + depends on ARCH_CLPS711X select SERIAL_CORE + default y help - ::: To be written ::: + This enables the driver for the on-chip UARTs of the Cirrus + Logic EP711x/EP721x/EP731x processors. config SERIAL_CLPS711X_CONSOLE bool "Support for console on CLPS711X serial port" @@ -173,9 +175,7 @@ config SERIAL_CLPS711X_CONSOLE Even if you say Y here, the currently visible virtual console (/dev/tty0) will still be used as the system console by default, but you can alter that using a kernel command line option such as - "console=ttyCL1". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) + "console=ttyCL1". config SERIAL_SAMSUNG tristate "Samsung SoC serial support" diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 144cd3987d4cb5c6c108d0488a41a0e1ba8eca73..3ad079ffd049cbce0441d730e28f27bbfe4aeb4b 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1331,7 +1331,7 @@ static const struct spi_device_id ifx_id_table[] = { MODULE_DEVICE_TABLE(spi, ifx_id_table); /* spi operations */ -static const struct spi_driver ifx_spi_driver = { +static struct spi_driver ifx_spi_driver = { .driver = { .name = DRVNAME, .pm = &ifx_spi_pm, diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index d5c689d6217e3a2eb46223fa1ffd01b77e15e0df..e309e8b0aaba0c10f0e45d72c57480000ed43d6b 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -132,6 +132,7 @@ #define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ #define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ #define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ +#define UFCR_DCEDTE (1<<6) /* DCE/DTE mode select */ #define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ #define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7) #define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ @@ -667,22 +668,11 @@ static void imx_break_ctl(struct uart_port *port, int break_state) static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) { unsigned int val; - unsigned int ufcr_rfdiv; - - /* set receiver / transmitter trigger level. - * RFDIV is set such way to satisfy requested uartclk value - */ - val = TXTL << 10 | RXTL; - ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2) - / sport->port.uartclk; - - if(!ufcr_rfdiv) - ufcr_rfdiv = 1; - - val |= UFCR_RFDIV_REG(ufcr_rfdiv); + /* set receiver / transmitter trigger level */ + val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE); + val |= TXTL << UFCR_TXTL_SHF | RXTL; writel(val, sport->port.membase + UFCR); - return 0; } @@ -754,6 +744,7 @@ static int imx_startup(struct uart_port *port) } } + spin_lock_irqsave(&sport->port.lock, flags); /* * Finally, clear and enable interrupts */ @@ -807,7 +798,6 @@ static int imx_startup(struct uart_port *port) /* * Enable modem status interrupts */ - spin_lock_irqsave(&sport->port.lock,flags); imx_enable_ms(&sport->port); spin_unlock_irqrestore(&sport->port.lock,flags); @@ -837,10 +827,13 @@ static void imx_shutdown(struct uart_port *port) { struct imx_port *sport = (struct imx_port *)port; unsigned long temp; + unsigned long flags; + spin_lock_irqsave(&sport->port.lock, flags); temp = readl(sport->port.membase + UCR2); temp &= ~(UCR2_TXEN); writel(temp, sport->port.membase + UCR2); + spin_unlock_irqrestore(&sport->port.lock, flags); if (USE_IRDA(sport)) { struct imxuart_platform_data *pdata; @@ -869,12 +862,14 @@ static void imx_shutdown(struct uart_port *port) * Disable all interrupts, port and break condition. */ + spin_lock_irqsave(&sport->port.lock, flags); temp = readl(sport->port.membase + UCR1); temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); if (USE_IRDA(sport)) temp &= ~(UCR1_IREN); writel(temp, sport->port.membase + UCR1); + spin_unlock_irqrestore(&sport->port.lock, flags); } static void @@ -1217,6 +1212,9 @@ imx_console_write(struct console *co, const char *s, unsigned int count) struct imx_port *sport = imx_ports[co->index]; struct imx_port_ucrs old_ucr; unsigned int ucr1; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); /* * First, save UCR1/2/3 and then disable interrupts @@ -1242,6 +1240,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count) while (!(readl(sport->port.membase + USR2) & USR2_TXDC)); imx_port_ucrs_restore(&sport->port, &old_ucr); + + spin_unlock_irqrestore(&sport->port.lock, flags); } /* diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 2e341b81ff891b632e5cbee6d2337aba0f10cfe8..3a667eed63d6086c017c8abcc83a597850ec4966 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -73,6 +73,7 @@ #define AUART_CTRL0_CLKGATE (1 << 30) #define AUART_CTRL2_CTSEN (1 << 15) +#define AUART_CTRL2_RTSEN (1 << 14) #define AUART_CTRL2_RTS (1 << 11) #define AUART_CTRL2_RXE (1 << 9) #define AUART_CTRL2_TXE (1 << 8) @@ -259,9 +260,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) u32 ctrl = readl(u->membase + AUART_CTRL2); - ctrl &= ~AUART_CTRL2_RTS; - if (mctrl & TIOCM_RTS) - ctrl |= AUART_CTRL2_RTS; + ctrl &= ~AUART_CTRL2_RTSEN; + if (mctrl & TIOCM_RTS) { + if (u->state->port.flags & ASYNC_CTS_FLOW) + ctrl |= AUART_CTRL2_RTSEN; + } + s->ctrl = mctrl; writel(ctrl, u->membase + AUART_CTRL2); } @@ -359,9 +363,9 @@ static void mxs_auart_settermios(struct uart_port *u, /* figure out the hardware flow control settings */ if (cflag & CRTSCTS) - ctrl2 |= AUART_CTRL2_CTSEN; + ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN; else - ctrl2 &= ~AUART_CTRL2_CTSEN; + ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN); /* set baud rate */ baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk); diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 654755a990dfc30cac559567e260b17978bbc54b..333c8d012b0e32c9e40881fd1defff6cc52b8b10 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1348,10 +1348,16 @@ static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser) static int pmz_poll_get_char(struct uart_port *port) { struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + int tries = 2; - while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) - udelay(5); - return read_zsdata(uap); + while (tries) { + if ((read_zsreg(uap, R0) & Rx_CH_AV) != 0) + return read_zsdata(uap); + if (tries--) + udelay(5); + } + + return NO_POLL_CHAR; } static void pmz_poll_put_char(struct uart_port *port, unsigned char c) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index d4d8c9453cd8c8b3e01a056f2ce3a2e20926412d..9be296cf729518d1cc48f7f6918229860f49bda0 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -25,6 +25,7 @@ #include #include +#include #include #include #include @@ -1410,8 +1411,8 @@ static void work_fn_rx(struct work_struct *work) /* Handle incomplete DMA receive */ struct tty_struct *tty = port->state->port.tty; struct dma_chan *chan = s->chan_rx; - struct sh_desc *sh_desc = container_of(desc, struct sh_desc, - async_tx); + struct shdma_desc *sh_desc = container_of(desc, + struct shdma_desc, async_tx); unsigned long flags; int count; diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 6cd414341d5ecebe293ecddc326d3be5832b88af..6579ffdd8e9ba3d2e4a6cf5a51031ebe60a092d0 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -216,8 +216,7 @@ static int ulite_startup(struct uart_port *port) { int ret; - ret = request_irq(port->irq, ulite_isr, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, "uartlite", port); + ret = request_irq(port->irq, ulite_isr, IRQF_SHARED, "uartlite", port); if (ret) return ret; diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index a7773a3e02b11cedabb884a74b11ef366a4e342e..7065df6036ca27ceb96d5acecc93128b73f96460 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -13,7 +13,7 @@ config USB_ARCH_HAS_OHCI default y if PXA3xx default y if ARCH_EP93XX default y if ARCH_AT91 - default y if ARCH_PNX4008 && I2C + default y if ARCH_PNX4008 default y if MFD_TC6393XB default y if ARCH_W90X900 default y if ARCH_DAVINCI_DA8XX diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 8337fb5d988de6cc68c7e06aa44341d09cd67c62..47e499c9c0b62734fa52adc44033e1b0d4bbda48 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -1,9 +1,9 @@ config USB_CHIPIDEA tristate "ChipIdea Highspeed Dual Role Controller" - depends on USB + depends on USB || USB_GADGET help - Say Y here if your system has a dual role high speed USB - controller based on ChipIdea silicon IP. Currently, only the + Say Y here if your system has a dual role high speed USB + controller based on ChipIdea silicon IP. Currently, only the peripheral mode is supported. When compiled dynamically, the module will be called ci-hdrc.ko. @@ -12,7 +12,7 @@ if USB_CHIPIDEA config USB_CHIPIDEA_UDC bool "ChipIdea device controller" - depends on USB_GADGET + depends on USB_GADGET=y || USB_GADGET=USB_CHIPIDEA select USB_GADGET_DUALSPEED help Say Y here to enable device controller functionality of the @@ -20,6 +20,7 @@ config USB_CHIPIDEA_UDC config USB_CHIPIDEA_HOST bool "ChipIdea host controller" + depends on USB=y || USB=USB_CHIPIDEA select USB_EHCI_ROOT_HUB_TT help Say Y here to enable host controller functionality of the diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index c7a032a4f0c54b4aa975e4dbc3dba9ba43cabfc9..d214448b677e68d1eeff7847fea48bb46942f31f 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -78,8 +78,7 @@ static inline int ep_to_bit(struct ci13xxx *ci, int n) } /** - * hw_device_state: enables/disables interrupts & starts/stops device (execute - * without interruption) + * hw_device_state: enables/disables interrupts (execute without interruption) * @dma: 0 => disable, !0 => enable and set dma engine * * This function returns an error code @@ -91,9 +90,7 @@ static int hw_device_state(struct ci13xxx *ci, u32 dma) /* interrupt, error, port change, reset, sleep/suspend */ hw_write(ci, OP_USBINTR, ~0, USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); - hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); } else { - hw_write(ci, OP_USBCMD, USBCMD_RS, 0); hw_write(ci, OP_USBINTR, ~0, 0); } return 0; @@ -774,10 +771,7 @@ __acquires(mEp->lock) { struct ci13xxx_req *mReq, *mReqTemp; struct ci13xxx_ep *mEpTemp = mEp; - int uninitialized_var(retval); - - if (list_empty(&mEp->qh.queue)) - return -EINVAL; + int retval = 0; list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue, queue) { @@ -1420,6 +1414,21 @@ static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA) return -ENOTSUPP; } +/* Change Data+ pullup status + * this func is used by usb_gadget_connect/disconnet + */ +static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on) +{ + struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); + + if (is_on) + hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); + else + hw_write(ci, OP_USBCMD, USBCMD_RS, 0); + + return 0; +} + static int ci13xxx_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver); static int ci13xxx_stop(struct usb_gadget *gadget, @@ -1432,6 +1441,7 @@ static int ci13xxx_stop(struct usb_gadget *gadget, static const struct usb_gadget_ops usb_gadget_ops = { .vbus_session = ci13xxx_vbus_session, .wakeup = ci13xxx_wakeup, + .pullup = ci13xxx_pullup, .vbus_draw = ci13xxx_vbus_draw, .udc_start = ci13xxx_start, .udc_stop = ci13xxx_stop, @@ -1455,7 +1465,12 @@ static int init_eps(struct ci13xxx *ci) mEp->ep.name = mEp->name; mEp->ep.ops = &usb_ep_ops; - mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; + /* + * for ep0: maxP defined in desc, for other + * eps, maxP is set by epautoconfig() called + * by gadget layer + */ + mEp->ep.maxpacket = (unsigned short)~0; INIT_LIST_HEAD(&mEp->qh.queue); mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL, @@ -1475,6 +1490,7 @@ static int init_eps(struct ci13xxx *ci) else ci->ep0in = mEp; + mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; continue; } @@ -1484,6 +1500,17 @@ static int init_eps(struct ci13xxx *ci) return retval; } +static void destroy_eps(struct ci13xxx *ci) +{ + int i; + + for (i = 0; i < ci->hw_ep_max; i++) { + struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i]; + + dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma); + } +} + /** * ci13xxx_start: register a gadget driver * @gadget: our gadget @@ -1691,7 +1718,7 @@ static int udc_start(struct ci13xxx *ci) if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { if (ci->transceiver == NULL) { retval = -ENODEV; - goto free_pools; + goto destroy_eps; } } @@ -1729,7 +1756,7 @@ static int udc_start(struct ci13xxx *ci) remove_trans: if (!IS_ERR_OR_NULL(ci->transceiver)) { - otg_set_peripheral(ci->transceiver->otg, &ci->gadget); + otg_set_peripheral(ci->transceiver->otg, NULL); if (ci->global_phy) usb_put_phy(ci->transceiver); } @@ -1742,6 +1769,8 @@ static int udc_start(struct ci13xxx *ci) put_transceiver: if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy) usb_put_phy(ci->transceiver); +destroy_eps: + destroy_eps(ci); free_pools: dma_pool_destroy(ci->td_pool); free_qh_pool: @@ -1756,18 +1785,12 @@ static int udc_start(struct ci13xxx *ci) */ static void udc_stop(struct ci13xxx *ci) { - int i; - if (ci == NULL) return; usb_del_gadget_udc(&ci->gadget); - for (i = 0; i < ci->hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i]; - - dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma); - } + destroy_eps(ci); dma_pool_destroy(ci->td_pool); dma_pool_destroy(ci->qh_pool); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 56d6bf66848894b76564ba452e00d6cf37f13416..f763ed7ba91ea08a4c0dd0166558ccb6683447d5 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1104,7 +1104,8 @@ static int acm_probe(struct usb_interface *intf, } - if (data_interface->cur_altsetting->desc.bNumEndpoints < 2) + if (data_interface->cur_altsetting->desc.bNumEndpoints < 2 || + control_interface->cur_altsetting->desc.bNumEndpoints == 0) return -EINVAL; epctrl = &control_interface->cur_altsetting->endpoint[0].desc; diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 65a55abb791f53dd458f0b23c77af5497142ec6d..5f0cb417b736bb4b61c73afc52672029af59cbda 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -109,12 +109,14 @@ static struct usb_driver wdm_driver; /* return intfdata if we own the interface, else look up intf in the list */ static struct wdm_device *wdm_find_device(struct usb_interface *intf) { - struct wdm_device *desc = NULL; + struct wdm_device *desc; spin_lock(&wdm_device_list_lock); list_for_each_entry(desc, &wdm_device_list, device_list) if (desc->intf == intf) - break; + goto found; + desc = NULL; +found: spin_unlock(&wdm_device_list_lock); return desc; @@ -122,12 +124,14 @@ static struct wdm_device *wdm_find_device(struct usb_interface *intf) static struct wdm_device *wdm_find_device_by_minor(int minor) { - struct wdm_device *desc = NULL; + struct wdm_device *desc; spin_lock(&wdm_device_list_lock); list_for_each_entry(desc, &wdm_device_list, device_list) if (desc->intf->minor == minor) - break; + goto found; + desc = NULL; +found: spin_unlock(&wdm_device_list_lock); return desc; diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index d9569658476274f34d8a51726da828d87bf44831..3440812b4a849c3d2f372e022f730ade5f5e3e6b 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -624,7 +624,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, /* print devices for all busses */ list_for_each_entry(bus, &usb_bus_list, bus_list) { /* recurse through all children of the root hub */ - if (!bus->root_hub) + if (!bus_to_hcd(bus)->rh_registered) continue; usb_lock_device(bus->root_hub); ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index bc84106ac057d7affb0e4d7c5c6ce22dcc2b7943..75ba2091f9b4f253a699563e22a9c6fd80c12676 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1011,10 +1011,7 @@ static int register_root_hub(struct usb_hcd *hcd) if (retval) { dev_err (parent_dev, "can't register root hub for %s, %d\n", dev_name(&usb_dev->dev), retval); - } - mutex_unlock(&usb_bus_list_lock); - - if (retval == 0) { + } else { spin_lock_irq (&hcd_root_hub_lock); hcd->rh_registered = 1; spin_unlock_irq (&hcd_root_hub_lock); @@ -1023,6 +1020,7 @@ static int register_root_hub(struct usb_hcd *hcd) if (HCD_DEAD(hcd)) usb_hc_died (hcd); /* This time clean up */ } + mutex_unlock(&usb_bus_list_lock); return retval; } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 821126eb81762ee2b57c971eec611c1e9a4e7ef6..128a804c42f406b6c6b1f32f57110ff6b0810b41 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -2181,6 +2182,14 @@ int usb_new_device(struct usb_device *udev) /* Tell the world! */ announce_device(udev); + if (udev->serial) + add_device_randomness(udev->serial, strlen(udev->serial)); + if (udev->product) + add_device_randomness(udev->product, strlen(udev->product)); + if (udev->manufacturer) + add_device_randomness(udev->manufacturer, + strlen(udev->manufacturer)); + device_enable_async_suspend(&udev->dev); /* diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f15501f4c585694c0c513eac78f692558ae8720f..e77a8e8eaa233b9b4febd38ef8c01ace8ac832a5 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -71,6 +71,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04b4, 0x0526), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Microchip Joss Optical infrared touchboard device */ + { USB_DEVICE(0x04d8, 0x000c), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Samsung Android phone modem - ID conflict with SPH-I500 */ { USB_DEVICE(0x04e8, 0x6601), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index c34452a7304f9dec269ba64706ab999559e67eff..a68ff53124dc15e88ab3ceaa35e3fbf7e97cc978 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -436,16 +436,21 @@ static int __devinit dwc3_probe(struct platform_device *pdev) dev_err(dev, "missing IRQ\n"); return -ENODEV; } - dwc->xhci_resources[1] = *res; + dwc->xhci_resources[1].start = res->start; + dwc->xhci_resources[1].end = res->end; + dwc->xhci_resources[1].flags = res->flags; + dwc->xhci_resources[1].name = res->name; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "missing memory resource\n"); return -ENODEV; } - dwc->xhci_resources[0] = *res; + dwc->xhci_resources[0].start = res->start; dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + DWC3_XHCI_REGS_END; + dwc->xhci_resources[0].flags = res->flags; + dwc->xhci_resources[0].name = res->name; /* * Request memory region but exclude xHCI regs, diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 9b94886b66e589ee3040556bf284985a01a64bc6..e4d5ca86b9da5413d1c3c52079b4a2abcd9481ad 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -720,7 +720,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, transferred = min_t(u32, ur->length, transfer_size - length); memcpy(ur->buf, dwc->ep0_bounce, transferred); - dwc->ep0_bounced = false; } else { transferred = ur->length - length; } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 58fdfad96b4d61b2cc86de9763a135dc81fcd908..c2813c2b005a8e223f93ff50a3215e24172904c2 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -263,8 +263,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, if (req->request.status == -EINPROGRESS) req->request.status = status; - usb_gadget_unmap_request(&dwc->gadget, &req->request, - req->direction); + if (dwc->ep0_bounced && dep->number == 0) + dwc->ep0_bounced = false; + else + usb_gadget_unmap_request(&dwc->gadget, &req->request, + req->direction); dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n", req, dep->name, req->request.actual, @@ -1026,6 +1029,7 @@ static void __dwc3_gadget_start_isoc(struct dwc3 *dwc, if (list_empty(&dep->request_list)) { dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n", dep->name); + dep->flags |= DWC3_EP_PENDING_REQUEST; return; } @@ -1089,6 +1093,17 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) if (dep->flags & DWC3_EP_PENDING_REQUEST) { int ret; + /* + * If xfernotready is already elapsed and it is a case + * of isoc transfer, then issue END TRANSFER, so that + * you can receive xfernotready again and can have + * notion of current microframe. + */ + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { + dwc3_stop_active_transfer(dwc, dep->number); + return 0; + } + ret = __dwc3_gadget_kick_transfer(dep, 0, true); if (ret && ret != -EBUSY) { struct dwc3 *dwc = dep->dwc; diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index ee0ebacf8227df070dc4a40daf8cd873007ca296..89dcf155d57e9e75fec8919e120fe6fcaa4b0136 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -450,7 +450,7 @@ static int dbgp_ehci_startup(void) writel(FLAG_CF, &ehci_regs->configured_flag); /* Wait until the controller is no longer halted */ - loop = 10; + loop = 1000; do { status = readl(&ehci_regs->status); if (!(status & STS_HALT)) diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index c9e66dfb02e6642c1e88149884857948b44869e8..1e35963bd4edc29f735319a76e0a4eb7052b27f5 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -475,8 +475,7 @@ static int at91_ep_enable(struct usb_ep *_ep, unsigned long flags; if (!_ep || !ep - || !desc || ep->ep.desc - || _ep->name == ep0name + || !desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || (maxpacket = usb_endpoint_maxp(desc)) == 0 || maxpacket > ep->maxpacket) { @@ -530,7 +529,6 @@ static int at91_ep_enable(struct usb_ep *_ep, tmp |= AT91_UDP_EPEDS; __raw_writel(tmp, ep->creg); - ep->ep.desc = desc; ep->ep.maxpacket = maxpacket; /* @@ -1635,7 +1633,6 @@ static int at91_start(struct usb_gadget *gadget, udc->driver = driver; udc->gadget.dev.driver = &driver->driver; udc->gadget.dev.of_node = udc->pdev->dev.of_node; - dev_set_drvdata(&udc->gadget.dev, &driver->driver); udc->enabled = 1; udc->selfpowered = 1; @@ -1656,7 +1653,6 @@ static int at91_stop(struct usb_gadget *gadget, spin_unlock_irqrestore(&udc->lock, flags); udc->gadget.dev.driver = NULL; - dev_set_drvdata(&udc->gadget.dev, NULL); udc->driver = NULL; DBG("unbound from %s\n", driver->driver.name); diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index b799106027adfc5d75a45244a47fbd015bedfd20..afdbb1cbf5d94d972c52f57f4099a1bb0202bef5 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1916,6 +1916,27 @@ static int dummy_hub_status(struct usb_hcd *hcd, char *buf) return retval; } +/* usb 3.0 root hub device descriptor */ +struct { + struct usb_bos_descriptor bos; + struct usb_ss_cap_descriptor ss_cap; +} __packed usb3_bos_desc = { + + .bos = { + .bLength = USB_DT_BOS_SIZE, + .bDescriptorType = USB_DT_BOS, + .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)), + .bNumDeviceCaps = 1, + }, + .ss_cap = { + .bLength = USB_DT_USB_SS_CAP_SIZE, + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_SS_CAP_TYPE, + .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION), + .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION), + }, +}; + static inline void ss_hub_descriptor(struct usb_hub_descriptor *desc) { @@ -2006,6 +2027,18 @@ static int dummy_hub_control( else hub_descriptor((struct usb_hub_descriptor *) buf); break; + + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + if (hcd->speed != HCD_USB3) + goto error; + + if ((wValue >> 8) != USB_DT_BOS) + goto error; + + memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc)); + retval = sizeof(usb3_bos_desc); + break; + case GetHubStatus: *(__le32 *) buf = cpu_to_le32(0); break; @@ -2503,10 +2536,8 @@ static int dummy_hcd_probe(struct platform_device *pdev) hs_hcd->has_tt = 1; retval = usb_add_hcd(hs_hcd, 0, 0); - if (retval != 0) { - usb_put_hcd(hs_hcd); - return retval; - } + if (retval) + goto put_usb2_hcd; if (mod_data.is_super_speed) { ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev, @@ -2525,6 +2556,8 @@ static int dummy_hcd_probe(struct platform_device *pdev) put_usb3_hcd: usb_put_hcd(ss_hcd); dealloc_usb2_hcd: + usb_remove_hcd(hs_hcd); +put_usb2_hcd: usb_put_hcd(hs_hcd); the_controller.hs_hcd = the_controller.ss_hcd = NULL; return retval; diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 8adc79d1b40277ac15092a53bac28749627c60cf..829aba75a6dfef28f1ce79055f5b73d6df883c68 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -34,11 +34,15 @@ /* Debugging ****************************************************************/ #ifdef VERBOSE_DEBUG +#ifndef pr_vdebug # define pr_vdebug pr_debug +#endif /* pr_vdebug */ # define ffs_dump_mem(prefix, ptr, len) \ print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len) #else +#ifndef pr_vdebug # define pr_vdebug(...) do { } while (0) +#endif /* pr_vdebug */ # define ffs_dump_mem(prefix, ptr, len) do { } while (0) #endif /* VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c index 965a6293206acc5bb52facb12d8acf50d3c3c6a2..8ee9268fe253f2dc01de4f84f451ef3a1870a69a 100644 --- a/drivers/usb/gadget/f_phonet.c +++ b/drivers/usb/gadget/f_phonet.c @@ -301,7 +301,7 @@ pn_rx_submit(struct f_phonet *fp, struct usb_request *req, gfp_t gfp_flags) struct page *page; int err; - page = alloc_page(gfp_flags); + page = __skb_alloc_page(gfp_flags | __GFP_NOMEMALLOC, NULL); if (!page) return -ENOMEM; diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 3d28fb976c7821898ea44fc4c8ac4656011d546a..9fd7886cfa9a7aac60035d7357e5ed00bfff40ff 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -1836,7 +1836,7 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* init to known state, then setup irqs */ udc_reset(dev); udc_reinit (dev); - if (request_irq(pdev->irq, goku_irq, IRQF_SHARED/*|IRQF_SAMPLE_RANDOM*/, + if (request_irq(pdev->irq, goku_irq, IRQF_SHARED, driver_name, dev) != 0) { DBG(dev, "request interrupt %d failed\n", pdev->irq); retval = -EBUSY; diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 53c093b941e5915302775b0916785fe24c7db866..907ad3ecb341b0c3dc285b478b3d34dc57b450d5 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -2201,19 +2201,15 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) #ifdef CONFIG_ARCH_LUBBOCK if (machine_is_lubbock()) { - retval = request_irq(LUBBOCK_USB_DISC_IRQ, - lubbock_vbus_irq, - IRQF_SAMPLE_RANDOM, - driver_name, dev); + retval = request_irq(LUBBOCK_USB_DISC_IRQ, lubbock_vbus_irq, + 0, driver_name, dev); if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", driver_name, LUBBOCK_USB_DISC_IRQ, retval); goto err_irq_lub; } - retval = request_irq(LUBBOCK_USB_IRQ, - lubbock_vbus_irq, - IRQF_SAMPLE_RANDOM, - driver_name, dev); + retval = request_irq(LUBBOCK_USB_IRQ, lubbock_vbus_irq, + 0, driver_name, dev); if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", driver_name, LUBBOCK_USB_IRQ, retval); diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index b13e0bb5f5b8131de7cc26a928449215f2e0334c..0bb617e1dda2e0ecf2a440b6494761338f15004c 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -3599,6 +3599,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) if (hsotg->num_of_eps == 0) { dev_err(dev, "wrong number of EPs (zero)\n"); + ret = -EINVAL; goto err_supplies; } @@ -3606,6 +3607,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) GFP_KERNEL); if (!eps) { dev_err(dev, "cannot get memory\n"); + ret = -ENOMEM; goto err_supplies; } @@ -3622,6 +3624,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) GFP_KERNEL); if (!hsotg->ctrl_req) { dev_err(dev, "failed to allocate ctrl req\n"); + ret = -ENOMEM; goto err_ep_mem; } diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index ae8b18869b8c0189b6ef2d2c68760cb12e2307e5..8d9bcd8207c8d1fee7e47813d7d6ee7f76ca0b6b 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -656,9 +656,8 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) if (!(filp->f_mode & FMODE_WRITE)) ro = 1; - if (filp->f_path.dentry) - inode = filp->f_path.dentry->d_inode; - if (!inode || (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) { + inode = filp->f_path.dentry->d_inode; + if ((!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) { LINFO(curlun, "invalid file type: %s\n", filename); goto out; } @@ -667,7 +666,7 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) * If we can't read the file, it's no good. * If we can't write the file, use it read-only. */ - if (!filp->f_op || !(filp->f_op->read || filp->f_op->aio_read)) { + if (!(filp->f_op->read || filp->f_op->aio_read)) { LINFO(curlun, "file not readable: %s\n", filename); goto out; } @@ -712,7 +711,6 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) if (fsg_lun_is_open(curlun)) fsg_lun_close(curlun); - get_file(filp); curlun->blksize = blksize; curlun->blkbits = blkbits; curlun->ro = ro; @@ -720,10 +718,10 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) curlun->file_length = size; curlun->num_sectors = num_sectors; LDBG(curlun, "open backing file: %s\n", filename); - rc = 0; + return 0; out: - filp_close(filp, current->files); + fput(filp); return rc; } diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 90e82e288eb9f25b6aad4842db1a001f174a0515..0e52309261543208f50a0ecd71e2d158ac256415 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -669,6 +669,8 @@ static int eth_stop(struct net_device *net) spin_lock_irqsave(&dev->lock, flags); if (dev->port_usb) { struct gether *link = dev->port_usb; + const struct usb_endpoint_descriptor *in; + const struct usb_endpoint_descriptor *out; if (link->close) link->close(link); @@ -682,10 +684,14 @@ static int eth_stop(struct net_device *net) * their own pace; the network stack can handle old packets. * For the moment we leave this here, since it works. */ + in = link->in_ep->desc; + out = link->out_ep->desc; usb_ep_disable(link->in_ep); usb_ep_disable(link->out_ep); if (netif_carrier_ok(net)) { DBG(dev, "host still using in/out endpoints\n"); + link->in_ep->desc = in; + link->out_ep->desc = out; usb_ep_enable(link->in_ep); usb_ep_enable(link->out_ep); } diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 5b3f5fffea92d241b50587b885c24bf69f83e878..da6d479ff9a61e5f57950be3b78e052a029eaa32 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -132,11 +132,15 @@ static unsigned n_ports; #ifdef VERBOSE_DEBUG +#ifndef pr_vdebug #define pr_vdebug(fmt, arg...) \ pr_debug(fmt, ##arg) +#endif /* pr_vdebug */ #else +#ifndef pr_vdebig #define pr_vdebug(fmt, arg...) \ ({ if (0) pr_debug(fmt, ##arg); }) +#endif /* pr_vdebug */ #endif /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/gadget/u_uac1.c b/drivers/usb/gadget/u_uac1.c index af989898205989ca46e443b6e8d496d9c8ba459b..e0c5e88e03ed30dc02c533d0eae3a41b94bcb00b 100644 --- a/drivers/usb/gadget/u_uac1.c +++ b/drivers/usb/gadget/u_uac1.c @@ -275,17 +275,17 @@ static int gaudio_close_snd_dev(struct gaudio *gau) /* Close control device */ snd = &gau->control; if (snd->filp) - filp_close(snd->filp, current->files); + filp_close(snd->filp, NULL); /* Close PCM playback device and setup substream */ snd = &gau->playback; if (snd->filp) - filp_close(snd->filp, current->files); + filp_close(snd->filp, NULL); /* Close PCM capture device and setup substream */ snd = &gau->capture; if (snd->filp) - filp_close(snd->filp, current->files); + filp_close(snd->filp, NULL); return 0; } diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index bb55eb4a7d485b806e69ba0c5141912f04bd6791..d7fe287d067803e484d56efdf53060546634ea1e 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -56,15 +56,6 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 -/* Errata i693 */ -static struct clk *utmi_p1_fck; -static struct clk *utmi_p2_fck; -static struct clk *xclk60mhsp1_ck; -static struct clk *xclk60mhsp2_ck; -static struct clk *usbhost_p1_fck; -static struct clk *usbhost_p2_fck; -static struct clk *init_60m_fclk; - /*-------------------------------------------------------------------------*/ static const struct hc_driver ehci_omap_hc_driver; @@ -80,40 +71,6 @@ static inline u32 ehci_read(void __iomem *base, u32 reg) return __raw_readl(base + reg); } -/* Erratum i693 workaround sequence */ -static void omap_ehci_erratum_i693(struct ehci_hcd *ehci) -{ - int ret = 0; - - /* Switch to the internal 60 MHz clock */ - ret = clk_set_parent(utmi_p1_fck, init_60m_fclk); - if (ret != 0) - ehci_err(ehci, "init_60m_fclk set parent" - "failed error:%d\n", ret); - - ret = clk_set_parent(utmi_p2_fck, init_60m_fclk); - if (ret != 0) - ehci_err(ehci, "init_60m_fclk set parent" - "failed error:%d\n", ret); - - clk_enable(usbhost_p1_fck); - clk_enable(usbhost_p2_fck); - - /* Wait 1ms and switch back to the external clock */ - mdelay(1); - ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck); - if (ret != 0) - ehci_err(ehci, "xclk60mhsp1_ck set parent" - "failed error:%d\n", ret); - - ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck); - if (ret != 0) - ehci_err(ehci, "xclk60mhsp2_ck set parent" - "failed error:%d\n", ret); - - clk_disable(usbhost_p1_fck); - clk_disable(usbhost_p2_fck); -} static void omap_ehci_soft_phy_reset(struct usb_hcd *hcd, u8 port) { @@ -195,50 +152,6 @@ static int omap_ehci_init(struct usb_hcd *hcd) return rc; } -static int omap_ehci_hub_control( - struct usb_hcd *hcd, - u16 typeReq, - u16 wValue, - u16 wIndex, - char *buf, - u16 wLength -) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - u32 __iomem *status_reg = &ehci->regs->port_status[ - (wIndex & 0xff) - 1]; - u32 temp; - unsigned long flags; - int retval = 0; - - spin_lock_irqsave(&ehci->lock, flags); - - if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { - temp = ehci_readl(ehci, status_reg); - if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { - retval = -EPIPE; - goto done; - } - - temp &= ~PORT_WKCONN_E; - temp |= PORT_WKDISC_E | PORT_WKOC_E; - ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); - - omap_ehci_erratum_i693(ehci); - - set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); - goto done; - } - - spin_unlock_irqrestore(&ehci->lock, flags); - - /* Handle the hub control events here */ - return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); -done: - spin_unlock_irqrestore(&ehci->lock, flags); - return retval; -} - static void disable_put_regulator( struct ehci_hcd_omap_platform_data *pdata) { @@ -351,79 +264,9 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) goto err_pm_runtime; } - /* get clocks */ - utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); - if (IS_ERR(utmi_p1_fck)) { - ret = PTR_ERR(utmi_p1_fck); - dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); - goto err_add_hcd; - } - - xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); - if (IS_ERR(xclk60mhsp1_ck)) { - ret = PTR_ERR(xclk60mhsp1_ck); - dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); - goto err_utmi_p1_fck; - } - - utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); - if (IS_ERR(utmi_p2_fck)) { - ret = PTR_ERR(utmi_p2_fck); - dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); - goto err_xclk60mhsp1_ck; - } - - xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); - if (IS_ERR(xclk60mhsp2_ck)) { - ret = PTR_ERR(xclk60mhsp2_ck); - dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); - goto err_utmi_p2_fck; - } - - usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); - if (IS_ERR(usbhost_p1_fck)) { - ret = PTR_ERR(usbhost_p1_fck); - dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); - goto err_xclk60mhsp2_ck; - } - - usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); - if (IS_ERR(usbhost_p2_fck)) { - ret = PTR_ERR(usbhost_p2_fck); - dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); - goto err_usbhost_p1_fck; - } - - init_60m_fclk = clk_get(dev, "init_60m_fclk"); - if (IS_ERR(init_60m_fclk)) { - ret = PTR_ERR(init_60m_fclk); - dev_err(dev, "init_60m_fclk failed error:%d\n", ret); - goto err_usbhost_p2_fck; - } return 0; -err_usbhost_p2_fck: - clk_put(usbhost_p2_fck); - -err_usbhost_p1_fck: - clk_put(usbhost_p1_fck); - -err_xclk60mhsp2_ck: - clk_put(xclk60mhsp2_ck); - -err_utmi_p2_fck: - clk_put(utmi_p2_fck); - -err_xclk60mhsp1_ck: - clk_put(xclk60mhsp1_ck); - -err_utmi_p1_fck: - clk_put(utmi_p1_fck); - -err_add_hcd: - usb_remove_hcd(hcd); - err_pm_runtime: disable_put_regulator(pdata); pm_runtime_put_sync(dev); @@ -454,14 +297,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) iounmap(hcd->regs); usb_put_hcd(hcd); - clk_put(utmi_p1_fck); - clk_put(utmi_p2_fck); - clk_put(xclk60mhsp1_ck); - clk_put(xclk60mhsp2_ck); - clk_put(usbhost_p1_fck); - clk_put(usbhost_p2_fck); - clk_put(init_60m_fclk); - pm_runtime_put_sync(dev); pm_runtime_disable(dev); @@ -532,7 +367,7 @@ static const struct hc_driver ehci_omap_hc_driver = { * root hub support */ .hub_status_data = ehci_hub_status_data, - .hub_control = omap_ehci_hub_control, + .hub_control = ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 9bc39ca460c80bdfe275b313a47f4683a81e4f3c..4b66374bdc8e33f74e20ff7bc30b7894ab24698e 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -128,9 +128,17 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh) else { qtd = list_entry (qh->qtd_list.next, struct ehci_qtd, qtd_list); - /* first qtd may already be partially processed */ - if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) + /* + * first qtd may already be partially processed. + * If we come here during unlink, the QH overlay region + * might have reference to the just unlinked qtd. The + * qtd is updated in qh_completions(). Update the QH + * overlay here. + */ + if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) { + qh->hw->hw_qtd_next = qtd->hw_next; qtd = NULL; + } } if (qtd) diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c index 58c96bd50d22853d10a8ac423b39acf0e375eeb7..0c9e43cfaff547128aa87f948e986f58500de089 100644 --- a/drivers/usb/host/ehci-sead3.c +++ b/drivers/usb/host/ehci-sead3.c @@ -40,7 +40,7 @@ static int ehci_sead3_setup(struct usb_hcd *hcd) ehci->need_io_watchdog = 0; /* Set burst length to 16 words. */ - ehci_writel(ehci, 0x1010, &ehci->regs->reserved[1]); + ehci_writel(ehci, 0x1010, &ehci->regs->reserved1[1]); return ret; } diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 950e95efa381bce88d7c6c148ac90609755ee83b..26dedb30ad0be75199dbaf81b3c18ec6aa3e961f 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -799,11 +799,12 @@ static int tegra_ehci_remove(struct platform_device *pdev) #endif usb_remove_hcd(hcd); - usb_put_hcd(hcd); tegra_usb_phy_close(tegra->phy); iounmap(hcd->regs); + usb_put_hcd(hcd); + clk_disable_unprepare(tegra->clk); clk_put(tegra->clk); diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 2ed112d3e1595d45c5d6a8ab4053c883310124d1..256326322cfd8b96dd5ee686c0f1a769be52a074 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -543,12 +543,12 @@ static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep) usb_pipein(urb->pipe) ? "IN" : "OUT", ep->nextpid, short_ok ? "" : "not_", PTD_GET_COUNT(ptd), ep->maxpacket, len); + /* save the data underrun error code for later and + * proceed with the status stage + */ + urb->actual_length += PTD_GET_COUNT(ptd); if (usb_pipecontrol(urb->pipe)) { ep->nextpid = USB_PID_ACK; - /* save the data underrun error code for later and - * proceed with the status stage - */ - urb->actual_length += PTD_GET_COUNT(ptd); BUG_ON(urb->actual_length > urb->transfer_buffer_length); if (urb->status == -EINPROGRESS) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index a665b3eaa74672f28e7d011b1ea4da265667187f..0bf72f943b00d392654fdc9613e4f397bfac2d32 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -467,7 +467,8 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) /* From the GPIO notifying the over-current situation, find * out the corresponding port */ at91_for_each_port(port) { - if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { + if (gpio_is_valid(pdata->overcurrent_pin[port]) && + gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { gpio = pdata->overcurrent_pin[port]; break; } @@ -570,6 +571,16 @@ static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev) if (pdata) { at91_for_each_port(i) { + /* + * do not configure PIO if not in relation with + * real USB port on board + */ + if (i >= pdata->ports) { + pdata->vbus_pin[i] = -EINVAL; + pdata->overcurrent_pin[i] = -EINVAL; + break; + } + if (!gpio_is_valid(pdata->vbus_pin[i])) continue; gpio = pdata->vbus_pin[i]; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index e7d75d295988c3fabc64c36fdf6d1db23f70b7d0..f8b2d91851f7cbfd509aa35b98119acdc544e948 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -403,8 +403,6 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver, static inline void usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) { - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - usb_remove_hcd(hcd); if (!IS_ERR_OR_NULL(hcd->phy)) { (void) otg_set_host(hcd->phy->otg, 0); diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index df0828cb2aa328ecf06cb37cb1a6981fa41d52f3..966d1484ee79a2db8c5e78e135c5e0760814d183 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -75,7 +75,9 @@ #define NB_PIF0_PWRDOWN_1 0x01100013 #define USB_INTEL_XUSB2PR 0xD0 +#define USB_INTEL_USB2PRM 0xD4 #define USB_INTEL_USB3_PSSEN 0xD8 +#define USB_INTEL_USB3PRM 0xDC static struct amd_chipset_info { struct pci_dev *nb_dev; @@ -772,10 +774,18 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) return; } - ports_available = 0xffffffff; + /* Read USB3PRM, the USB 3.0 Port Routing Mask Register + * Indicate the ports that can be changed from OS. + */ + pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM, + &ports_available); + + dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n", + ports_available); + /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable - * Register, to turn on SuperSpeed terminations for all - * available ports. + * Register, to turn on SuperSpeed terminations for the + * switchable ports. */ pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, cpu_to_le32(ports_available)); @@ -785,7 +795,16 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled " "under xHCI: 0x%x\n", ports_available); - ports_available = 0xffffffff; + /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register + * Indicate the USB 2.0 ports to be controlled by the xHCI host. + */ + + pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM, + &ports_available); + + dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n", + ports_available); + /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to * switch the USB 2.0 power and data lines over to the xHCI * host. @@ -800,6 +819,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) } EXPORT_SYMBOL_GPL(usb_enable_xhci_ports); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) +{ + pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0); + pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0); +} +EXPORT_SYMBOL_GPL(usb_disable_xhci_ports); + /** * PCI Quirks for xHCI. * @@ -815,12 +841,12 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) void __iomem *op_reg_base; u32 val; int timeout; + int len = pci_resource_len(pdev, 0); if (!mmio_resource_enabled(pdev, 0)) return; - base = ioremap_nocache(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); + base = ioremap_nocache(pci_resource_start(pdev, 0), len); if (base == NULL) return; @@ -830,9 +856,17 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) */ ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET); do { + if ((ext_cap_offset + sizeof(val)) > len) { + /* We're reading garbage from the controller */ + dev_warn(&pdev->dev, + "xHCI controller failing to respond"); + return; + } + if (!ext_cap_offset) /* We've reached the end of the extended capabilities */ goto hc_init; + val = readl(base + ext_cap_offset); if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY) break; @@ -863,9 +897,10 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) /* Disable any BIOS SMIs and clear all SMI events*/ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); +hc_init: if (usb_is_intel_switchable_xhci(pdev)) usb_enable_xhci_ports(pdev); -hc_init: + op_reg_base = base + XHCI_HC_LENGTH(readl(base)); /* Wait for the host controller to be ready before writing any diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index b1002a8ef96f58fc46039d6c37b4bcca18d056cb..7f69a39163ce3b5560f9e0e24a0a9d86e7f77cef 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -10,10 +10,12 @@ void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); bool usb_is_intel_switchable_xhci(struct pci_dev *pdev); void usb_enable_xhci_ports(struct pci_dev *xhci_pdev); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); #else static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} static inline void usb_amd_dev_put(void) {} +static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {} #endif /* CONFIG_PCI */ #endif /* __LINUX_USB_PCI_QUIRKS_H */ diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 74bfc868b7ade609dc67cea66195bd499f92b067..d5eb357aa5c42cff5575bdf1297f3ebbafa49d85 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -493,11 +493,48 @@ static void xhci_hub_report_link_state(u32 *status, u32 status_reg) * when this bit is set. */ pls |= USB_PORT_STAT_CONNECTION; + } else { + /* + * If CAS bit isn't set but the Port is already at + * Compliance Mode, fake a connection so the USB core + * notices the Compliance state and resets the port. + * This resolves an issue generated by the SN65LVPE502CP + * in which sometimes the port enters compliance mode + * caused by a delay on the host-device negotiation. + */ + if (pls == USB_SS_PORT_LS_COMP_MOD) + pls |= USB_PORT_STAT_CONNECTION; } + /* update status field */ *status |= pls; } +/* + * Function for Compliance Mode Quirk. + * + * This Function verifies if all xhc USB3 ports have entered U0, if so, + * the compliance mode timer is deleted. A port won't enter + * compliance mode if it has previously entered U0. + */ +void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex) +{ + u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1); + bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0); + + if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK)) + return; + + if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) { + xhci->port_status_u0 |= 1 << wIndex; + if (xhci->port_status_u0 == all_ports_seen_u0) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n"); + xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n"); + } + } +} + int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { @@ -651,6 +688,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* Update Port Link State for super speed ports*/ if (hcd->speed == HCD_USB3) { xhci_hub_report_link_state(&status, temp); + /* + * Verify if all USB3 Ports Have entered U0 already. + * Delete Compliance Mode Timer if so. + */ + xhci_del_comp_mod_timer(xhci, temp, wIndex); } if (bus_state->port_c_suspend & (1 << wIndex)) status |= 1 << USB_PORT_FEAT_C_SUSPEND; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 18b231b0c5d373afbec7efde87faed879ca26889..9bfd4ca1153c32cd51d3468608948a31a3a08953 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -94,11 +94,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->limit_active_eps = 64; xhci->quirks |= XHCI_SW_BW_CHECKING; + /* + * PPT desktop boards DH77EB and DH77DF will power back on after + * a few seconds of being shutdown. The fix for this is to + * switch the ports from xHCI to EHCI on shutdown. We can't use + * DMI information to find those particular boards (since each + * vendor will change the board name), so we have to key off all + * PPT chipsets. + */ + xhci->quirks |= XHCI_SPURIOUS_REBOOT; } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); + xhci->quirks |= XHCI_TRUST_TX_LENGTH; } if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 689bc18b051d6c1d1ae8e381e887a01edbdfc9e9..df90fe51b4aa2d406b8b2f8bfa591c410df89a35 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -118,7 +118,7 @@ static int xhci_plat_probe(struct platform_device *pdev) goto put_hcd; } - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { dev_dbg(&pdev->dev, "error mapping memory\n"); ret = -EFAULT; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 8275645889da4ce779c08c88ac4ea06473f222e0..643c2f3f3e738e1785447fd2d8c27559e0fb0d24 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -145,29 +145,37 @@ static void next_trb(struct xhci_hcd *xhci, */ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring) { - union xhci_trb *next; unsigned long long addr; ring->deq_updates++; - /* If this is not event ring, there is one more usable TRB */ + /* + * If this is not event ring, and the dequeue pointer + * is not on a link TRB, there is one more usable TRB + */ if (ring->type != TYPE_EVENT && !last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) ring->num_trbs_free++; - next = ++(ring->dequeue); - /* Update the dequeue pointer further if that was a link TRB or we're at - * the end of an event ring segment (which doesn't have link TRBS) - */ - while (last_trb(xhci, ring, ring->deq_seg, next)) { - if (ring->type == TYPE_EVENT && last_trb_on_last_seg(xhci, - ring, ring->deq_seg, next)) { - ring->cycle_state = (ring->cycle_state ? 0 : 1); + do { + /* + * Update the dequeue pointer further if that was a link TRB or + * we're at the end of an event ring segment (which doesn't have + * link TRBS) + */ + if (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) { + if (ring->type == TYPE_EVENT && + last_trb_on_last_seg(xhci, ring, + ring->deq_seg, ring->dequeue)) { + ring->cycle_state = (ring->cycle_state ? 0 : 1); + } + ring->deq_seg = ring->deq_seg->next; + ring->dequeue = ring->deq_seg->trbs; + } else { + ring->dequeue++; } - ring->deq_seg = ring->deq_seg->next; - ring->dequeue = ring->deq_seg->trbs; - next = ring->dequeue; - } + } while (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)); + addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); } @@ -2073,8 +2081,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (xhci->quirks & XHCI_TRUST_TX_LENGTH) trb_comp_code = COMP_SHORT_TX; else - xhci_warn(xhci, "WARN Successful completion on short TX: " - "needs XHCI_TRUST_TX_LENGTH quirk?\n"); + xhci_warn_ratelimited(xhci, + "WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?\n"); case COMP_SHORT_TX: break; case COMP_STOP: diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7648b2d4b268182b4e9097db1bab61b97b86a0d4..6ece0ed288d4da9398bb96ecc8223f31b6ce8e0c 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "xhci.h" @@ -166,7 +167,7 @@ int xhci_reset(struct xhci_hcd *xhci) xhci_writel(xhci, command, &xhci->op_regs->command); ret = handshake(xhci, &xhci->op_regs->command, - CMD_RESET, 0, 250 * 1000); + CMD_RESET, 0, 10 * 1000 * 1000); if (ret) return ret; @@ -175,7 +176,8 @@ int xhci_reset(struct xhci_hcd *xhci) * xHCI cannot write to any doorbells or operational registers other * than status until the "Controller Not Ready" flag is cleared. */ - ret = handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); + ret = handshake(xhci, &xhci->op_regs->status, + STS_CNR, 0, 10 * 1000 * 1000); for (i = 0; i < 2; ++i) { xhci->bus_state[i].port_c_suspend = 0; @@ -397,6 +399,95 @@ static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) #endif +static void compliance_mode_recovery(unsigned long arg) +{ + struct xhci_hcd *xhci; + struct usb_hcd *hcd; + u32 temp; + int i; + + xhci = (struct xhci_hcd *)arg; + + for (i = 0; i < xhci->num_usb3_ports; i++) { + temp = xhci_readl(xhci, xhci->usb3_ports[i]); + if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) { + /* + * Compliance Mode Detected. Letting USB Core + * handle the Warm Reset + */ + xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n", + i + 1); + xhci_dbg(xhci, "Attempting Recovery routine!\n"); + hcd = xhci->shared_hcd; + + if (hcd->state == HC_STATE_SUSPENDED) + usb_hcd_resume_root_hub(hcd); + + usb_hcd_poll_rh_status(hcd); + } + } + + if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1)) + mod_timer(&xhci->comp_mode_recovery_timer, + jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); +} + +/* + * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver + * that causes ports behind that hardware to enter compliance mode sometimes. + * The quirk creates a timer that polls every 2 seconds the link state of + * each host controller's port and recovers it by issuing a Warm reset + * if Compliance mode is detected, otherwise the port will become "dead" (no + * device connections or disconnections will be detected anymore). Becasue no + * status event is generated when entering compliance mode (per xhci spec), + * this quirk is needed on systems that have the failing hardware installed. + */ +static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) +{ + xhci->port_status_u0 = 0; + init_timer(&xhci->comp_mode_recovery_timer); + + xhci->comp_mode_recovery_timer.data = (unsigned long) xhci; + xhci->comp_mode_recovery_timer.function = compliance_mode_recovery; + xhci->comp_mode_recovery_timer.expires = jiffies + + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS); + + set_timer_slack(&xhci->comp_mode_recovery_timer, + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); + add_timer(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n"); +} + +/* + * This function identifies the systems that have installed the SN65LVPE502CP + * USB3.0 re-driver and that need the Compliance Mode Quirk. + * Systems: + * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820 + */ +static bool compliance_mode_recovery_timer_quirk_check(void) +{ + const char *dmi_product_name, *dmi_sys_vendor; + + dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); + dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); + + if (!(strstr(dmi_sys_vendor, "Hewlett-Packard"))) + return false; + + if (strstr(dmi_product_name, "Z420") || + strstr(dmi_product_name, "Z620") || + strstr(dmi_product_name, "Z820")) + return true; + + return false; +} + +static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci) +{ + return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1)); +} + + /* * Initialize memory for HCD and xHC (one-time init). * @@ -420,6 +511,12 @@ int xhci_init(struct usb_hcd *hcd) retval = xhci_mem_init(xhci, GFP_KERNEL); xhci_dbg(xhci, "Finished xhci_init\n"); + /* Initializing Compliance Mode Recovery Data If Needed */ + if (compliance_mode_recovery_timer_quirk_check()) { + xhci->quirks |= XHCI_COMP_MODE_QUIRK; + compliance_mode_recovery_timer_init(xhci); + } + return retval; } @@ -628,6 +725,11 @@ void xhci_stop(struct usb_hcd *hcd) del_timer_sync(&xhci->event_ring_timer); #endif + /* Deleting Compliance Mode Recovery Timer */ + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + (!(xhci_all_ports_seen_u0(xhci)))) + del_timer_sync(&xhci->comp_mode_recovery_timer); + if (xhci->quirks & XHCI_AMD_PLL_FIX) usb_amd_dev_put(); @@ -658,6 +760,9 @@ void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + if (xhci->quirks & XHCI_SPURIOUS_REBOOT) + usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); + spin_lock_irq(&xhci->lock); xhci_halt(xhci); spin_unlock_irq(&xhci->lock); @@ -802,6 +907,16 @@ int xhci_suspend(struct xhci_hcd *xhci) } spin_unlock_irq(&xhci->lock); + /* + * Deleting Compliance Mode Recovery Timer because the xHCI Host + * is about to be suspended. + */ + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + (!(xhci_all_ports_seen_u0(xhci)))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n"); + } + /* step 5: remove core well power */ /* synchronize irq when using MSI-X */ xhci_msix_sync_irqs(xhci); @@ -934,6 +1049,16 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) usb_hcd_resume_root_hub(hcd); usb_hcd_resume_root_hub(xhci->shared_hcd); } + + /* + * If system is subject to the Quirk, Compliance Mode Timer needs to + * be re-initialized Always after a system resume. Ports are subject + * to suffer the Compliance Mode issue again. It doesn't matter if + * ports have entered previously to U0 before system's suspension. + */ + if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + compliance_mode_recovery_timer_init(xhci); + return retval; } #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 55c0785810c99fb5286e29d39cd4d7ff2b98addb..1a05908c66737ce94a77f880d1bc14cb7e40134a 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1494,6 +1494,8 @@ struct xhci_hcd { #define XHCI_TRUST_TX_LENGTH (1 << 10) #define XHCI_LPM_SUPPORT (1 << 11) #define XHCI_INTEL_HOST (1 << 12) +#define XHCI_SPURIOUS_REBOOT (1 << 13) +#define XHCI_COMP_MODE_QUIRK (1 << 14) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ @@ -1510,6 +1512,11 @@ struct xhci_hcd { unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ unsigned hw_lpm_support:1; + /* Compliance Mode Recovery Data */ + struct timer_list comp_mode_recovery_timer; + u32 port_status_u0; +/* Compliance Mode Timer Triggered every 2 seconds */ +#define COMP_MODE_RCVRY_MSECS 2000 }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ @@ -1537,6 +1544,8 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args) #define xhci_warn(xhci, fmt, args...) \ dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args) +#define xhci_warn_ratelimited(xhci, fmt, args...) \ + dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args) /* TODO: copied from ehci.h - can be refactored? */ /* xHCI spec says all registers are little endian */ diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index ff08015b230c8064b81be97e8946b0c8bf91b108..ae794b90766ba627c94712f52a899ba244f95479 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -232,7 +232,7 @@ static int emi62_load_firmware (struct usb_device *dev) return err; } -static const struct usb_device_id id_table[] __devinitconst = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index ef0c3f9f0947a8718d5d5362ba9025df84a696fa..6259f0d99324c58e30d21c7510e186b60e61514a 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -8,7 +8,7 @@ config USB_MUSB_HDRC tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' depends on USB && USB_GADGET select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN) - select NOP_USB_XCEIV if (SOC_OMAPTI81XX || SOC_OMAPAM33XX) + select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX) select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS @@ -57,7 +57,7 @@ config USB_MUSB_AM35X config USB_MUSB_DSPS tristate "TI DSPS platforms" - depends on SOC_OMAPTI81XX || SOC_OMAPAM33XX + depends on SOC_TI81XX || SOC_AM33XX config USB_MUSB_BLACKFIN tristate "Blackfin" diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 217808d9fbe1991298da67295404d50cd71e593a..494772fc9e23ad123b7fb726fe1e0de24807b849 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -479,9 +479,9 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) ret = -ENODEV; goto err0; } - strcpy((u8 *)res->name, "mc"); res->parent = NULL; resources[1] = *res; + resources[1].name = "mc"; /* allocate the child platform device */ musb = platform_device_alloc("musb-hdrc", -1); @@ -566,27 +566,28 @@ static int __devinit dsps_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, glue); - /* create the child platform device for first instances of musb */ - ret = dsps_create_musb_pdev(glue, 0); - if (ret != 0) { - dev_err(&pdev->dev, "failed to create child pdev\n"); - goto err2; - } - /* enable the usbss clocks */ pm_runtime_enable(&pdev->dev); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) { dev_err(&pdev->dev, "pm_runtime_get_sync FAILED"); + goto err2; + } + + /* create the child platform device for first instances of musb */ + ret = dsps_create_musb_pdev(glue, 0); + if (ret != 0) { + dev_err(&pdev->dev, "failed to create child pdev\n"); goto err3; } return 0; err3: - pm_runtime_disable(&pdev->dev); + pm_runtime_put(&pdev->dev); err2: + pm_runtime_disable(&pdev->dev); kfree(glue->wrp); err1: kfree(glue); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 4bb717d0bd41b12a8b0f6fd879c987286a8059b5..1ae378d5fc6f25b5861eb2e3ef79b32a76a4885f 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2049,7 +2049,7 @@ static int musb_urb_enqueue( * we only have work to do in the former case. */ spin_lock_irqsave(&musb->lock, flags); - if (hep->hcpriv) { + if (hep->hcpriv || !next_urb(qh)) { /* some concurrent activity submitted another urb to hep... * odd, rare, error prone, but legal. */ diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 57a608584e160248708aca39570a7e30bf55d7a5..c1be687e00ec722524f8807ff8d628ec7a5d0798 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -388,7 +388,7 @@ dma_controller_create(struct musb *musb, void __iomem *base) struct platform_device *pdev = to_platform_device(dev); int irq = platform_get_irq_byname(pdev, "dma"); - if (irq == 0) { + if (irq <= 0) { dev_err(dev, "No DMA interrupt line!\n"); return NULL; } diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 1a1bd9cf40c5ce7c1d6f7ef1ac46360d0b6884a4..341625442377ec6f1daac69450269c95f4148eb5 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -1215,7 +1215,7 @@ static int __devinit tusb_probe(struct platform_device *pdev) ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err1; + goto err2; } return 0; diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index 575fc815c932205a4255744f4288fd44790febde..7a88667742b663dc64f627560dfc5d34af32d0a7 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -1576,7 +1576,6 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id) isp->irq_type = IRQF_TRIGGER_FALLING; } - isp->irq_type |= IRQF_SAMPLE_RANDOM; status = request_irq(i2c->irq, isp1301_irq, isp->irq_type, DRIVER_NAME, isp); if (status < 0) { diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 8c9bb1ad30698b58f8949d7cdc0ca048492f5d62..681da06170c29273045b9602f9b63a873cacf8c0 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -603,12 +603,12 @@ static int usbhsc_resume(struct device *dev) struct usbhs_priv *priv = dev_get_drvdata(dev); struct platform_device *pdev = usbhs_priv_to_pdev(priv); - usbhs_platform_call(priv, phy_reset, pdev); - if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) usbhsc_power_ctrl(priv, 1); - usbhsc_hotplug(priv); + usbhs_platform_call(priv, phy_reset, pdev); + + usbhsc_drvcllbck_notify_hotplug(pdev); return 0; } diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index ecd173032fd480cc5954c48f03aa61e7b5c439e8..143c4e9e1be45cc24c0a612d38e590a5ad136be9 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -818,7 +818,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) usbhs_pipe_is_dcp(pipe)) goto usbhsf_pio_prepare_push; - if (len % 4) /* 32bit alignment */ + if (len & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_push; if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ @@ -905,7 +905,7 @@ static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) /* use PIO if packet is less than pio_dma_border */ len = usbhsf_fifo_rcv_len(priv, fifo); len = min(pkt->length - pkt->actual, len); - if (len % 4) /* 32bit alignment */ + if (len & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_pop_unselect; if (len < usbhs_get_dparam(priv, pio_dma_border)) diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 1834cf50888cbc8a6832e5250a8ccd8dbdddaee5..9b69a132329474052486e0483649b6c64a746a4f 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1266,6 +1266,12 @@ static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, return ret; } +static int usbhsh_bus_nop(struct usb_hcd *hcd) +{ + /* nothing to do */ + return 0; +} + static struct hc_driver usbhsh_driver = { .description = usbhsh_hcd_name, .hcd_priv_size = sizeof(struct usbhsh_hpriv), @@ -1290,6 +1296,8 @@ static struct hc_driver usbhsh_driver = { */ .hub_status_data = usbhsh_hub_status_data, .hub_control = usbhsh_hub_control, + .bus_suspend = usbhsh_bus_nop, + .bus_resume = usbhsh_bus_nop, }; /* diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index f398d1e34474c34084b43dac6702a6378f71a970..c15f2e7cefc77e4782dfb39fcedc54e5b0bc6329 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -61,18 +61,23 @@ static int usb_serial_device_probe(struct device *dev) goto exit; } + /* make sure suspend/resume doesn't race against port_probe */ + retval = usb_autopm_get_interface(port->serial->interface); + if (retval) + goto exit; + driver = port->serial->type; if (driver->port_probe) { retval = driver->port_probe(port); if (retval) - goto exit; + goto exit_with_autopm; } retval = device_create_file(dev, &dev_attr_port_number); if (retval) { if (driver->port_remove) retval = driver->port_remove(port); - goto exit; + goto exit_with_autopm; } minor = port->number; @@ -81,6 +86,8 @@ static int usb_serial_device_probe(struct device *dev) "%s converter now attached to ttyUSB%d\n", driver->description, minor); +exit_with_autopm: + usb_autopm_put_interface(port->serial->interface); exit: return retval; } @@ -96,6 +103,9 @@ static int usb_serial_device_remove(struct device *dev) if (!port) return -ENODEV; + /* make sure suspend/resume doesn't race against port_remove */ + usb_autopm_get_interface(port->serial->interface); + device_remove_file(&port->dev, &dev_attr_port_number); driver = port->serial->type; @@ -107,6 +117,7 @@ static int usb_serial_device_remove(struct device *dev) dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", driver->description, minor); + usb_autopm_put_interface(port->serial->interface); return retval; } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index bc912e5a3bebddf3073fe17e015b6195be3708be..f906b3aec2179ceb708c9cce772cd85a4e1a1724 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -704,6 +704,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) }, { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) }, { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) }, { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) }, @@ -804,13 +805,33 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, - { USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) }, + { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID, + USB_CLASS_VENDOR_SPEC, + USB_SUBCLASS_VENDOR_SPEC, 0x00) }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) }, { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) }, + { USB_DEVICE(FTDI_VID, PI_C865_PID) }, + { USB_DEVICE(FTDI_VID, PI_C857_PID) }, + { USB_DEVICE(PI_VID, PI_C866_PID) }, + { USB_DEVICE(PI_VID, PI_C663_PID) }, + { USB_DEVICE(PI_VID, PI_C725_PID) }, + { USB_DEVICE(PI_VID, PI_E517_PID) }, + { USB_DEVICE(PI_VID, PI_C863_PID) }, { USB_DEVICE(PI_VID, PI_E861_PID) }, + { USB_DEVICE(PI_VID, PI_C867_PID) }, + { USB_DEVICE(PI_VID, PI_E609_PID) }, + { USB_DEVICE(PI_VID, PI_E709_PID) }, + { USB_DEVICE(PI_VID, PI_100F_PID) }, + { USB_DEVICE(PI_VID, PI_1011_PID) }, + { USB_DEVICE(PI_VID, PI_1012_PID) }, + { USB_DEVICE(PI_VID, PI_1013_PID) }, + { USB_DEVICE(PI_VID, PI_1014_PID) }, + { USB_DEVICE(PI_VID, PI_1015_PID) }, + { USB_DEVICE(PI_VID, PI_1016_PID) }, + { USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) }, { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 5661c7e2d4151cbb8f2335c4572f83fc3deccff8..41fe5826100c0ad27a62d21d16e8d5845dfa25cc 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -75,6 +75,9 @@ #define FTDI_OPENDCC_GATEWAY_PID 0xBFDB #define FTDI_OPENDCC_GBM_PID 0xBFDC +/* NZR SEM 16+ USB (http://www.nzr.de) */ +#define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */ + /* * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) */ @@ -539,7 +542,10 @@ /* * Microchip Technology, Inc. * - * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by: + * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are + * used by single function CDC ACM class based firmware demo + * applications. The VID/PID has also been used in firmware + * emulating FTDI serial chips by: * Hornby Elite - Digital Command Control Console * http://www.hornby.com/hornby-dcc/controllers/ */ @@ -791,8 +797,34 @@ * Physik Instrumente * http://www.physikinstrumente.com/en/products/ */ +/* These two devices use the VID of FTDI */ +#define PI_C865_PID 0xe0a0 /* PI C-865 Piezomotor Controller */ +#define PI_C857_PID 0xe0a1 /* PI Encoder Trigger Box */ + #define PI_VID 0x1a72 /* Vendor ID */ -#define PI_E861_PID 0x1008 /* E-861 piezo controller USB connection */ +#define PI_C866_PID 0x1000 /* PI C-866 Piezomotor Controller */ +#define PI_C663_PID 0x1001 /* PI C-663 Mercury-Step */ +#define PI_C725_PID 0x1002 /* PI C-725 Piezomotor Controller */ +#define PI_E517_PID 0x1005 /* PI E-517 Digital Piezo Controller Operation Module */ +#define PI_C863_PID 0x1007 /* PI C-863 */ +#define PI_E861_PID 0x1008 /* PI E-861 Piezomotor Controller */ +#define PI_C867_PID 0x1009 /* PI C-867 Piezomotor Controller */ +#define PI_E609_PID 0x100D /* PI E-609 Digital Piezo Controller */ +#define PI_E709_PID 0x100E /* PI E-709 Digital Piezo Controller */ +#define PI_100F_PID 0x100F /* PI Digital Piezo Controller */ +#define PI_1011_PID 0x1011 /* PI Digital Piezo Controller */ +#define PI_1012_PID 0x1012 /* PI Motion Controller */ +#define PI_1013_PID 0x1013 /* PI Motion Controller */ +#define PI_1014_PID 0x1014 /* PI Device */ +#define PI_1015_PID 0x1015 /* PI Device */ +#define PI_1016_PID 0x1016 /* PI Digital Servo Module */ + +/* + * Kondo Kagaku Co.Ltd. + * http://www.kondo-robot.com/EN + */ +#define KONDO_VID 0x165c +#define KONDO_USB_SERIAL_PID 0x0002 /* * Bayer Ascensia Contour blood glucose meter USB-converter cable. diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 5811d34b6c6bc514fb8474cc9662ad9521471a72..2cb30c535839db429c0165a76be26afdf84063cb 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -227,7 +227,6 @@ static void ipw_release(struct usb_serial *serial) { struct usb_wwan_intf_private *data = usb_get_serial_data(serial); - usb_wwan_release(serial); usb_set_serial_data(serial, NULL); kfree(data); } @@ -309,12 +308,12 @@ static struct usb_serial_driver ipw_device = { .description = "IPWireless converter", .id_table = id_table, .num_ports = 1, - .disconnect = usb_wwan_disconnect, .open = ipw_open, .close = ipw_close, .probe = ipw_probe, .attach = usb_wwan_startup, .release = ipw_release, + .port_remove = usb_wwan_port_remove, .dtr_rts = ipw_dtr_rts, .write = usb_wwan_write, }; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 57eca244842431fa100f742424c9dbc6310c4156..2f6da1e89bfa5606772103ce70f70087a9bfab42 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -82,8 +82,7 @@ * Defines used for sending commands to port */ -#define WAIT_FOR_EVER (HZ * 0) /* timeout urb is wait for ever */ -#define MOS_WDR_TIMEOUT (HZ * 5) /* default urb timeout */ +#define MOS_WDR_TIMEOUT 5000 /* default urb timeout */ #define MOS_PORT1 0x0200 #define MOS_PORT2 0x0300 @@ -1232,9 +1231,12 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty) return 0; spin_lock_irqsave(&mos7840_port->pool_lock, flags); - for (i = 0; i < NUM_URBS; ++i) - if (mos7840_port->busy[i]) - chars += URB_TRANSFER_BUFFER_SIZE; + for (i = 0; i < NUM_URBS; ++i) { + if (mos7840_port->busy[i]) { + struct urb *urb = mos7840_port->write_urb_pool[i]; + chars += urb->transfer_buffer_length; + } + } spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); dbg("%s - returns %d", __func__, chars); return chars; @@ -1344,7 +1346,7 @@ static void mos7840_close(struct usb_serial_port *port) static void mos7840_block_until_chase_response(struct tty_struct *tty, struct moschip_port *mos7840_port) { - int timeout = 1 * HZ; + int timeout = msecs_to_jiffies(1000); int wait = 10; int count; @@ -2672,7 +2674,7 @@ static int mos7840_startup(struct usb_serial *serial) /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ); + (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, MOS_WDR_TIMEOUT); return 0; error: for (/* nothing */; i >= 0; i--) { diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 08ff9b862049197566454d1052d6c46160efbab6..5ce88d1bc6f1e3ac15ac91290ad8cb2fd5935361 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -80,85 +80,9 @@ static void option_instat_callback(struct urb *urb); #define OPTION_PRODUCT_GTM380_MODEM 0x7201 #define HUAWEI_VENDOR_ID 0x12D1 -#define HUAWEI_PRODUCT_E600 0x1001 -#define HUAWEI_PRODUCT_E220 0x1003 -#define HUAWEI_PRODUCT_E220BIS 0x1004 -#define HUAWEI_PRODUCT_E1401 0x1401 -#define HUAWEI_PRODUCT_E1402 0x1402 -#define HUAWEI_PRODUCT_E1403 0x1403 -#define HUAWEI_PRODUCT_E1404 0x1404 -#define HUAWEI_PRODUCT_E1405 0x1405 -#define HUAWEI_PRODUCT_E1406 0x1406 -#define HUAWEI_PRODUCT_E1407 0x1407 -#define HUAWEI_PRODUCT_E1408 0x1408 -#define HUAWEI_PRODUCT_E1409 0x1409 -#define HUAWEI_PRODUCT_E140A 0x140A -#define HUAWEI_PRODUCT_E140B 0x140B -#define HUAWEI_PRODUCT_E140C 0x140C -#define HUAWEI_PRODUCT_E140D 0x140D -#define HUAWEI_PRODUCT_E140E 0x140E -#define HUAWEI_PRODUCT_E140F 0x140F -#define HUAWEI_PRODUCT_E1410 0x1410 -#define HUAWEI_PRODUCT_E1411 0x1411 -#define HUAWEI_PRODUCT_E1412 0x1412 -#define HUAWEI_PRODUCT_E1413 0x1413 -#define HUAWEI_PRODUCT_E1414 0x1414 -#define HUAWEI_PRODUCT_E1415 0x1415 -#define HUAWEI_PRODUCT_E1416 0x1416 -#define HUAWEI_PRODUCT_E1417 0x1417 -#define HUAWEI_PRODUCT_E1418 0x1418 -#define HUAWEI_PRODUCT_E1419 0x1419 -#define HUAWEI_PRODUCT_E141A 0x141A -#define HUAWEI_PRODUCT_E141B 0x141B -#define HUAWEI_PRODUCT_E141C 0x141C -#define HUAWEI_PRODUCT_E141D 0x141D -#define HUAWEI_PRODUCT_E141E 0x141E -#define HUAWEI_PRODUCT_E141F 0x141F -#define HUAWEI_PRODUCT_E1420 0x1420 -#define HUAWEI_PRODUCT_E1421 0x1421 -#define HUAWEI_PRODUCT_E1422 0x1422 -#define HUAWEI_PRODUCT_E1423 0x1423 -#define HUAWEI_PRODUCT_E1424 0x1424 -#define HUAWEI_PRODUCT_E1425 0x1425 -#define HUAWEI_PRODUCT_E1426 0x1426 -#define HUAWEI_PRODUCT_E1427 0x1427 -#define HUAWEI_PRODUCT_E1428 0x1428 -#define HUAWEI_PRODUCT_E1429 0x1429 -#define HUAWEI_PRODUCT_E142A 0x142A -#define HUAWEI_PRODUCT_E142B 0x142B -#define HUAWEI_PRODUCT_E142C 0x142C -#define HUAWEI_PRODUCT_E142D 0x142D -#define HUAWEI_PRODUCT_E142E 0x142E -#define HUAWEI_PRODUCT_E142F 0x142F -#define HUAWEI_PRODUCT_E1430 0x1430 -#define HUAWEI_PRODUCT_E1431 0x1431 -#define HUAWEI_PRODUCT_E1432 0x1432 -#define HUAWEI_PRODUCT_E1433 0x1433 -#define HUAWEI_PRODUCT_E1434 0x1434 -#define HUAWEI_PRODUCT_E1435 0x1435 -#define HUAWEI_PRODUCT_E1436 0x1436 -#define HUAWEI_PRODUCT_E1437 0x1437 -#define HUAWEI_PRODUCT_E1438 0x1438 -#define HUAWEI_PRODUCT_E1439 0x1439 -#define HUAWEI_PRODUCT_E143A 0x143A -#define HUAWEI_PRODUCT_E143B 0x143B -#define HUAWEI_PRODUCT_E143C 0x143C -#define HUAWEI_PRODUCT_E143D 0x143D -#define HUAWEI_PRODUCT_E143E 0x143E -#define HUAWEI_PRODUCT_E143F 0x143F #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 -#define HUAWEI_PRODUCT_E14AC 0x14AC -#define HUAWEI_PRODUCT_K3806 0x14AE #define HUAWEI_PRODUCT_K4605 0x14C6 -#define HUAWEI_PRODUCT_K5005 0x14C8 -#define HUAWEI_PRODUCT_K3770 0x14C9 -#define HUAWEI_PRODUCT_K3771 0x14CA -#define HUAWEI_PRODUCT_K4510 0x14CB -#define HUAWEI_PRODUCT_K4511 0x14CC -#define HUAWEI_PRODUCT_ETS1220 0x1803 -#define HUAWEI_PRODUCT_E353 0x1506 -#define HUAWEI_PRODUCT_E173S 0x1C05 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -615,104 +539,123 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1402, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1404, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1407, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1420, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1421, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1422, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1423, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1424, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1425, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1426, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1427, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1428, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1429, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1430, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1431, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1432, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1433, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1434, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1435, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1436, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1437, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1438, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1439, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4510, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4510, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x10) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x12) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x13) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x01) }, /* E398 3G Modem */ - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x02) }, /* E398 3G PC UI Interface */ - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x03) }, /* E398 3G Application Interface */ + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7C) }, + + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, @@ -1147,6 +1090,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, + { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, + { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ @@ -1297,8 +1244,8 @@ static struct usb_serial_driver option_1port_device = { .tiocmset = usb_wwan_tiocmset, .ioctl = usb_wwan_ioctl, .attach = usb_wwan_startup, - .disconnect = usb_wwan_disconnect, .release = option_release, + .port_remove = usb_wwan_port_remove, .read_int_callback = option_instat_callback, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, @@ -1414,8 +1361,6 @@ static void option_release(struct usb_serial *serial) struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); struct option_private *priv = intfdata->private; - usb_wwan_release(serial); - kfree(priv); kfree(intfdata); } diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 8d103019d6aa529511a82070a3864ef87af44c22..bfd50779f0c9f9bf93d2f795322912caa3978f7b 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -199,43 +199,49 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) /* default to enabling interface */ altsetting = 0; - switch (ifnum) { - /* Composite mode; don't bind to the QMI/net interface as that - * gets handled by other drivers. - */ + /* Composite mode; don't bind to the QMI/net interface as that + * gets handled by other drivers. + */ + + if (is_gobi1k) { /* Gobi 1K USB layout: * 0: serial port (doesn't respond) * 1: serial port (doesn't respond) * 2: AT-capable modem port * 3: QMI/net - * - * Gobi 2K+ USB layout: + */ + if (ifnum == 2) + dev_dbg(dev, "Modem port found\n"); + else + altsetting = -1; + } else { + /* Gobi 2K+ USB layout: * 0: QMI/net * 1: DM/DIAG (use libqcdm from ModemManager for communication) * 2: AT-capable modem port * 3: NMEA */ - - case 1: - if (is_gobi1k) + switch (ifnum) { + case 0: + /* Don't claim the QMI/net interface */ altsetting = -1; - else + break; + case 1: dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n"); - break; - case 2: - dev_dbg(dev, "Modem port found\n"); - break; - case 3: - if (is_gobi1k) - altsetting = -1; - else + break; + case 2: + dev_dbg(dev, "Modem port found\n"); + break; + case 3: /* * NMEA (serial line 9600 8N1) * # echo "\$GPS_START" > /dev/ttyUSBx * # echo "\$GPS_STOP" > /dev/ttyUSBx */ dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n"); + break; + } } done: @@ -262,8 +268,7 @@ static void qc_release(struct usb_serial *serial) { struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); - /* Call usb_wwan release & free the private data allocated in qcprobe */ - usb_wwan_release(serial); + /* Free the private data allocated in qcprobe */ usb_set_serial_data(serial, NULL); kfree(priv); } @@ -283,8 +288,8 @@ static struct usb_serial_driver qcdevice = { .write_room = usb_wwan_write_room, .chars_in_buffer = usb_wwan_chars_in_buffer, .attach = usb_wwan_startup, - .disconnect = usb_wwan_disconnect, .release = qc_release, + .port_remove = usb_wwan_port_remove, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, .resume = usb_wwan_resume, diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index c47b6ec030634f9af420987e06c33727042b4f05..1f034d2397c6c6ea3888e79aa6cd2ddb6d73202b 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -9,8 +9,7 @@ extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on); extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port); extern void usb_wwan_close(struct usb_serial_port *port); extern int usb_wwan_startup(struct usb_serial *serial); -extern void usb_wwan_disconnect(struct usb_serial *serial); -extern void usb_wwan_release(struct usb_serial *serial); +extern int usb_wwan_port_remove(struct usb_serial_port *port); extern int usb_wwan_write_room(struct tty_struct *tty); extern void usb_wwan_set_termios(struct tty_struct *tty, struct usb_serial_port *port, diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index f35971dff4a5782d6c0cca563f53558043359674..6855d5ed033115473cf02e3a6f3ee73d1d5bace8 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -565,62 +565,52 @@ int usb_wwan_startup(struct usb_serial *serial) } EXPORT_SYMBOL(usb_wwan_startup); -static void stop_read_write_urbs(struct usb_serial *serial) +int usb_wwan_port_remove(struct usb_serial_port *port) { - int i, j; - struct usb_serial_port *port; + int i; struct usb_wwan_port_private *portdata; - /* Stop reading/writing urbs */ - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - portdata = usb_get_serial_port_data(port); - for (j = 0; j < N_IN_URB; j++) - usb_kill_urb(portdata->in_urbs[j]); - for (j = 0; j < N_OUT_URB; j++) - usb_kill_urb(portdata->out_urbs[j]); + portdata = usb_get_serial_port_data(port); + usb_set_serial_port_data(port, NULL); + + /* Stop reading/writing urbs and free them */ + for (i = 0; i < N_IN_URB; i++) { + usb_kill_urb(portdata->in_urbs[i]); + usb_free_urb(portdata->in_urbs[i]); + free_page((unsigned long)portdata->in_buffer[i]); + } + for (i = 0; i < N_OUT_URB; i++) { + usb_kill_urb(portdata->out_urbs[i]); + usb_free_urb(portdata->out_urbs[i]); + kfree(portdata->out_buffer[i]); } -} -void usb_wwan_disconnect(struct usb_serial *serial) -{ - stop_read_write_urbs(serial); + /* Now free port private data */ + kfree(portdata); + return 0; } -EXPORT_SYMBOL(usb_wwan_disconnect); +EXPORT_SYMBOL(usb_wwan_port_remove); -void usb_wwan_release(struct usb_serial *serial) +#ifdef CONFIG_PM +static void stop_read_write_urbs(struct usb_serial *serial) { int i, j; struct usb_serial_port *port; struct usb_wwan_port_private *portdata; - /* Now free them */ + /* Stop reading/writing urbs */ for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); - - for (j = 0; j < N_IN_URB; j++) { - usb_free_urb(portdata->in_urbs[j]); - free_page((unsigned long) - portdata->in_buffer[j]); - portdata->in_urbs[j] = NULL; - } - for (j = 0; j < N_OUT_URB; j++) { - usb_free_urb(portdata->out_urbs[j]); - kfree(portdata->out_buffer[j]); - portdata->out_urbs[j] = NULL; - } - } - - /* Now free per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - kfree(usb_get_serial_port_data(port)); + if (!portdata) + continue; + for (j = 0; j < N_IN_URB; j++) + usb_kill_urb(portdata->in_urbs[j]); + for (j = 0; j < N_OUT_URB; j++) + usb_kill_urb(portdata->out_urbs[j]); } } -EXPORT_SYMBOL(usb_wwan_release); -#ifdef CONFIG_PM int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) { struct usb_wwan_intf_private *intfdata = serial->private; @@ -712,7 +702,7 @@ int usb_wwan_resume(struct usb_serial *serial) /* skip closed ports */ spin_lock_irq(&intfdata->susp_lock); - if (!portdata->opened) { + if (!portdata || !portdata->opened) { spin_unlock_irq(&intfdata->susp_lock); continue; } diff --git a/drivers/vfio/Kconfig b/drivers/vfio/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..7cd5dec0abd1e44a3b8eabf091b6cd42204d6877 --- /dev/null +++ b/drivers/vfio/Kconfig @@ -0,0 +1,16 @@ +config VFIO_IOMMU_TYPE1 + tristate + depends on VFIO + default n + +menuconfig VFIO + tristate "VFIO Non-Privileged userspace driver framework" + depends on IOMMU_API + select VFIO_IOMMU_TYPE1 if X86 + help + VFIO provides a framework for secure userspace device drivers. + See Documentation/vfio.txt for more details. + + If you don't know what to do here, say N. + +source "drivers/vfio/pci/Kconfig" diff --git a/drivers/vfio/Makefile b/drivers/vfio/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..2398d4a0e38b9d93f2bb7dae81d713b50b273751 --- /dev/null +++ b/drivers/vfio/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_VFIO) += vfio.o +obj-$(CONFIG_VFIO_IOMMU_TYPE1) += vfio_iommu_type1.o +obj-$(CONFIG_VFIO_PCI) += pci/ diff --git a/drivers/vfio/pci/Kconfig b/drivers/vfio/pci/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..5980758563ebc62448fb85c063f176cdcb0306f1 --- /dev/null +++ b/drivers/vfio/pci/Kconfig @@ -0,0 +1,8 @@ +config VFIO_PCI + tristate "VFIO support for PCI devices" + depends on VFIO && PCI && EVENTFD + help + Support for the PCI VFIO bus driver. This is required to make + use of PCI drivers using the VFIO framework. + + If you don't know what to do here, say N. diff --git a/drivers/vfio/pci/Makefile b/drivers/vfio/pci/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..131079255fd934a149963e9257452cfa1d67177c --- /dev/null +++ b/drivers/vfio/pci/Makefile @@ -0,0 +1,4 @@ + +vfio-pci-y := vfio_pci.o vfio_pci_intrs.o vfio_pci_rdwr.o vfio_pci_config.o + +obj-$(CONFIG_VFIO_PCI) += vfio-pci.o diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c new file mode 100644 index 0000000000000000000000000000000000000000..6968b7232232a07c8f6cdd96e6634cad2435511b --- /dev/null +++ b/drivers/vfio/pci/vfio_pci.c @@ -0,0 +1,579 @@ +/* + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from original vfio: + * Copyright 2010 Cisco Systems, Inc. All rights reserved. + * Author: Tom Lyon, pugs@cisco.com + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "vfio_pci_private.h" + +#define DRIVER_VERSION "0.2" +#define DRIVER_AUTHOR "Alex Williamson " +#define DRIVER_DESC "VFIO PCI - User Level meta-driver" + +static bool nointxmask; +module_param_named(nointxmask, nointxmask, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(nointxmask, + "Disable support for PCI 2.3 style INTx masking. If this resolves problems for specific devices, report lspci -vvvxxx to linux-pci@vger.kernel.org so the device can be fixed automatically via the broken_intx_masking flag."); + +static int vfio_pci_enable(struct vfio_pci_device *vdev) +{ + struct pci_dev *pdev = vdev->pdev; + int ret; + u16 cmd; + u8 msix_pos; + + vdev->reset_works = (pci_reset_function(pdev) == 0); + pci_save_state(pdev); + vdev->pci_saved_state = pci_store_saved_state(pdev); + if (!vdev->pci_saved_state) + pr_debug("%s: Couldn't store %s saved state\n", + __func__, dev_name(&pdev->dev)); + + ret = vfio_config_init(vdev); + if (ret) + goto out; + + if (likely(!nointxmask)) + vdev->pci_2_3 = pci_intx_mask_supported(pdev); + + pci_read_config_word(pdev, PCI_COMMAND, &cmd); + if (vdev->pci_2_3 && (cmd & PCI_COMMAND_INTX_DISABLE)) { + cmd &= ~PCI_COMMAND_INTX_DISABLE; + pci_write_config_word(pdev, PCI_COMMAND, cmd); + } + + msix_pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); + if (msix_pos) { + u16 flags; + u32 table; + + pci_read_config_word(pdev, msix_pos + PCI_MSIX_FLAGS, &flags); + pci_read_config_dword(pdev, msix_pos + PCI_MSIX_TABLE, &table); + + vdev->msix_bar = table & PCI_MSIX_FLAGS_BIRMASK; + vdev->msix_offset = table & ~PCI_MSIX_FLAGS_BIRMASK; + vdev->msix_size = ((flags & PCI_MSIX_FLAGS_QSIZE) + 1) * 16; + } else + vdev->msix_bar = 0xFF; + + ret = pci_enable_device(pdev); + if (ret) + goto out; + + return ret; + +out: + kfree(vdev->pci_saved_state); + vdev->pci_saved_state = NULL; + vfio_config_free(vdev); + return ret; +} + +static void vfio_pci_disable(struct vfio_pci_device *vdev) +{ + int bar; + + pci_disable_device(vdev->pdev); + + vfio_pci_set_irqs_ioctl(vdev, VFIO_IRQ_SET_DATA_NONE | + VFIO_IRQ_SET_ACTION_TRIGGER, + vdev->irq_type, 0, 0, NULL); + + vdev->virq_disabled = false; + + vfio_config_free(vdev); + + pci_reset_function(vdev->pdev); + + if (pci_load_and_free_saved_state(vdev->pdev, + &vdev->pci_saved_state) == 0) + pci_restore_state(vdev->pdev); + else + pr_info("%s: Couldn't reload %s saved state\n", + __func__, dev_name(&vdev->pdev->dev)); + + for (bar = PCI_STD_RESOURCES; bar <= PCI_STD_RESOURCE_END; bar++) { + if (!vdev->barmap[bar]) + continue; + pci_iounmap(vdev->pdev, vdev->barmap[bar]); + pci_release_selected_regions(vdev->pdev, 1 << bar); + vdev->barmap[bar] = NULL; + } +} + +static void vfio_pci_release(void *device_data) +{ + struct vfio_pci_device *vdev = device_data; + + if (atomic_dec_and_test(&vdev->refcnt)) + vfio_pci_disable(vdev); + + module_put(THIS_MODULE); +} + +static int vfio_pci_open(void *device_data) +{ + struct vfio_pci_device *vdev = device_data; + + if (!try_module_get(THIS_MODULE)) + return -ENODEV; + + if (atomic_inc_return(&vdev->refcnt) == 1) { + int ret = vfio_pci_enable(vdev); + if (ret) { + module_put(THIS_MODULE); + return ret; + } + } + + return 0; +} + +static int vfio_pci_get_irq_count(struct vfio_pci_device *vdev, int irq_type) +{ + if (irq_type == VFIO_PCI_INTX_IRQ_INDEX) { + u8 pin; + pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin); + if (pin) + return 1; + + } else if (irq_type == VFIO_PCI_MSI_IRQ_INDEX) { + u8 pos; + u16 flags; + + pos = pci_find_capability(vdev->pdev, PCI_CAP_ID_MSI); + if (pos) { + pci_read_config_word(vdev->pdev, + pos + PCI_MSI_FLAGS, &flags); + + return 1 << (flags & PCI_MSI_FLAGS_QMASK); + } + } else if (irq_type == VFIO_PCI_MSIX_IRQ_INDEX) { + u8 pos; + u16 flags; + + pos = pci_find_capability(vdev->pdev, PCI_CAP_ID_MSIX); + if (pos) { + pci_read_config_word(vdev->pdev, + pos + PCI_MSIX_FLAGS, &flags); + + return (flags & PCI_MSIX_FLAGS_QSIZE) + 1; + } + } + + return 0; +} + +static long vfio_pci_ioctl(void *device_data, + unsigned int cmd, unsigned long arg) +{ + struct vfio_pci_device *vdev = device_data; + unsigned long minsz; + + if (cmd == VFIO_DEVICE_GET_INFO) { + struct vfio_device_info info; + + minsz = offsetofend(struct vfio_device_info, num_irqs); + + if (copy_from_user(&info, (void __user *)arg, minsz)) + return -EFAULT; + + if (info.argsz < minsz) + return -EINVAL; + + info.flags = VFIO_DEVICE_FLAGS_PCI; + + if (vdev->reset_works) + info.flags |= VFIO_DEVICE_FLAGS_RESET; + + info.num_regions = VFIO_PCI_NUM_REGIONS; + info.num_irqs = VFIO_PCI_NUM_IRQS; + + return copy_to_user((void __user *)arg, &info, minsz); + + } else if (cmd == VFIO_DEVICE_GET_REGION_INFO) { + struct pci_dev *pdev = vdev->pdev; + struct vfio_region_info info; + + minsz = offsetofend(struct vfio_region_info, offset); + + if (copy_from_user(&info, (void __user *)arg, minsz)) + return -EFAULT; + + if (info.argsz < minsz) + return -EINVAL; + + switch (info.index) { + case VFIO_PCI_CONFIG_REGION_INDEX: + info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index); + info.size = pdev->cfg_size; + info.flags = VFIO_REGION_INFO_FLAG_READ | + VFIO_REGION_INFO_FLAG_WRITE; + break; + case VFIO_PCI_BAR0_REGION_INDEX ... VFIO_PCI_BAR5_REGION_INDEX: + info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index); + info.size = pci_resource_len(pdev, info.index); + if (!info.size) { + info.flags = 0; + break; + } + + info.flags = VFIO_REGION_INFO_FLAG_READ | + VFIO_REGION_INFO_FLAG_WRITE; + if (pci_resource_flags(pdev, info.index) & + IORESOURCE_MEM && info.size >= PAGE_SIZE) + info.flags |= VFIO_REGION_INFO_FLAG_MMAP; + break; + case VFIO_PCI_ROM_REGION_INDEX: + { + void __iomem *io; + size_t size; + + info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index); + info.flags = 0; + + /* Report the BAR size, not the ROM size */ + info.size = pci_resource_len(pdev, info.index); + if (!info.size) + break; + + /* Is it really there? */ + io = pci_map_rom(pdev, &size); + if (!io || !size) { + info.size = 0; + break; + } + pci_unmap_rom(pdev, io); + + info.flags = VFIO_REGION_INFO_FLAG_READ; + break; + } + default: + return -EINVAL; + } + + return copy_to_user((void __user *)arg, &info, minsz); + + } else if (cmd == VFIO_DEVICE_GET_IRQ_INFO) { + struct vfio_irq_info info; + + minsz = offsetofend(struct vfio_irq_info, count); + + if (copy_from_user(&info, (void __user *)arg, minsz)) + return -EFAULT; + + if (info.argsz < minsz || info.index >= VFIO_PCI_NUM_IRQS) + return -EINVAL; + + info.flags = VFIO_IRQ_INFO_EVENTFD; + + info.count = vfio_pci_get_irq_count(vdev, info.index); + + if (info.index == VFIO_PCI_INTX_IRQ_INDEX) + info.flags |= (VFIO_IRQ_INFO_MASKABLE | + VFIO_IRQ_INFO_AUTOMASKED); + else + info.flags |= VFIO_IRQ_INFO_NORESIZE; + + return copy_to_user((void __user *)arg, &info, minsz); + + } else if (cmd == VFIO_DEVICE_SET_IRQS) { + struct vfio_irq_set hdr; + u8 *data = NULL; + int ret = 0; + + minsz = offsetofend(struct vfio_irq_set, count); + + if (copy_from_user(&hdr, (void __user *)arg, minsz)) + return -EFAULT; + + if (hdr.argsz < minsz || hdr.index >= VFIO_PCI_NUM_IRQS || + hdr.flags & ~(VFIO_IRQ_SET_DATA_TYPE_MASK | + VFIO_IRQ_SET_ACTION_TYPE_MASK)) + return -EINVAL; + + if (!(hdr.flags & VFIO_IRQ_SET_DATA_NONE)) { + size_t size; + + if (hdr.flags & VFIO_IRQ_SET_DATA_BOOL) + size = sizeof(uint8_t); + else if (hdr.flags & VFIO_IRQ_SET_DATA_EVENTFD) + size = sizeof(int32_t); + else + return -EINVAL; + + if (hdr.argsz - minsz < hdr.count * size || + hdr.count > vfio_pci_get_irq_count(vdev, hdr.index)) + return -EINVAL; + + data = kmalloc(hdr.count * size, GFP_KERNEL); + if (!data) + return -ENOMEM; + + if (copy_from_user(data, (void __user *)(arg + minsz), + hdr.count * size)) { + kfree(data); + return -EFAULT; + } + } + + mutex_lock(&vdev->igate); + + ret = vfio_pci_set_irqs_ioctl(vdev, hdr.flags, hdr.index, + hdr.start, hdr.count, data); + + mutex_unlock(&vdev->igate); + kfree(data); + + return ret; + + } else if (cmd == VFIO_DEVICE_RESET) + return vdev->reset_works ? + pci_reset_function(vdev->pdev) : -EINVAL; + + return -ENOTTY; +} + +static ssize_t vfio_pci_read(void *device_data, char __user *buf, + size_t count, loff_t *ppos) +{ + unsigned int index = VFIO_PCI_OFFSET_TO_INDEX(*ppos); + struct vfio_pci_device *vdev = device_data; + struct pci_dev *pdev = vdev->pdev; + + if (index >= VFIO_PCI_NUM_REGIONS) + return -EINVAL; + + if (index == VFIO_PCI_CONFIG_REGION_INDEX) + return vfio_pci_config_readwrite(vdev, buf, count, ppos, false); + else if (index == VFIO_PCI_ROM_REGION_INDEX) + return vfio_pci_mem_readwrite(vdev, buf, count, ppos, false); + else if (pci_resource_flags(pdev, index) & IORESOURCE_IO) + return vfio_pci_io_readwrite(vdev, buf, count, ppos, false); + else if (pci_resource_flags(pdev, index) & IORESOURCE_MEM) + return vfio_pci_mem_readwrite(vdev, buf, count, ppos, false); + + return -EINVAL; +} + +static ssize_t vfio_pci_write(void *device_data, const char __user *buf, + size_t count, loff_t *ppos) +{ + unsigned int index = VFIO_PCI_OFFSET_TO_INDEX(*ppos); + struct vfio_pci_device *vdev = device_data; + struct pci_dev *pdev = vdev->pdev; + + if (index >= VFIO_PCI_NUM_REGIONS) + return -EINVAL; + + if (index == VFIO_PCI_CONFIG_REGION_INDEX) + return vfio_pci_config_readwrite(vdev, (char __user *)buf, + count, ppos, true); + else if (index == VFIO_PCI_ROM_REGION_INDEX) + return -EINVAL; + else if (pci_resource_flags(pdev, index) & IORESOURCE_IO) + return vfio_pci_io_readwrite(vdev, (char __user *)buf, + count, ppos, true); + else if (pci_resource_flags(pdev, index) & IORESOURCE_MEM) { + return vfio_pci_mem_readwrite(vdev, (char __user *)buf, + count, ppos, true); + } + + return -EINVAL; +} + +static int vfio_pci_mmap(void *device_data, struct vm_area_struct *vma) +{ + struct vfio_pci_device *vdev = device_data; + struct pci_dev *pdev = vdev->pdev; + unsigned int index; + u64 phys_len, req_len, pgoff, req_start, phys; + int ret; + + index = vma->vm_pgoff >> (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT); + + if (vma->vm_end < vma->vm_start) + return -EINVAL; + if ((vma->vm_flags & VM_SHARED) == 0) + return -EINVAL; + if (index >= VFIO_PCI_ROM_REGION_INDEX) + return -EINVAL; + if (!(pci_resource_flags(pdev, index) & IORESOURCE_MEM)) + return -EINVAL; + + phys_len = pci_resource_len(pdev, index); + req_len = vma->vm_end - vma->vm_start; + pgoff = vma->vm_pgoff & + ((1U << (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT)) - 1); + req_start = pgoff << PAGE_SHIFT; + + if (phys_len < PAGE_SIZE || req_start + req_len > phys_len) + return -EINVAL; + + if (index == vdev->msix_bar) { + /* + * Disallow mmaps overlapping the MSI-X table; users don't + * get to touch this directly. We could find somewhere + * else to map the overlap, but page granularity is only + * a recommendation, not a requirement, so the user needs + * to know which bits are real. Requiring them to mmap + * around the table makes that clear. + */ + + /* If neither entirely above nor below, then it overlaps */ + if (!(req_start >= vdev->msix_offset + vdev->msix_size || + req_start + req_len <= vdev->msix_offset)) + return -EINVAL; + } + + /* + * Even though we don't make use of the barmap for the mmap, + * we need to request the region and the barmap tracks that. + */ + if (!vdev->barmap[index]) { + ret = pci_request_selected_regions(pdev, + 1 << index, "vfio-pci"); + if (ret) + return ret; + + vdev->barmap[index] = pci_iomap(pdev, index, 0); + } + + vma->vm_private_data = vdev; + vma->vm_flags |= (VM_IO | VM_RESERVED); + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + phys = (pci_resource_start(pdev, index) >> PAGE_SHIFT) + pgoff; + + return remap_pfn_range(vma, vma->vm_start, phys, + req_len, vma->vm_page_prot); +} + +static const struct vfio_device_ops vfio_pci_ops = { + .name = "vfio-pci", + .open = vfio_pci_open, + .release = vfio_pci_release, + .ioctl = vfio_pci_ioctl, + .read = vfio_pci_read, + .write = vfio_pci_write, + .mmap = vfio_pci_mmap, +}; + +static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + u8 type; + struct vfio_pci_device *vdev; + struct iommu_group *group; + int ret; + + pci_read_config_byte(pdev, PCI_HEADER_TYPE, &type); + if ((type & PCI_HEADER_TYPE) != PCI_HEADER_TYPE_NORMAL) + return -EINVAL; + + group = iommu_group_get(&pdev->dev); + if (!group) + return -EINVAL; + + vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); + if (!vdev) { + iommu_group_put(group); + return -ENOMEM; + } + + vdev->pdev = pdev; + vdev->irq_type = VFIO_PCI_NUM_IRQS; + mutex_init(&vdev->igate); + spin_lock_init(&vdev->irqlock); + atomic_set(&vdev->refcnt, 0); + + ret = vfio_add_group_dev(&pdev->dev, &vfio_pci_ops, vdev); + if (ret) { + iommu_group_put(group); + kfree(vdev); + } + + return ret; +} + +static void vfio_pci_remove(struct pci_dev *pdev) +{ + struct vfio_pci_device *vdev; + + vdev = vfio_del_group_dev(&pdev->dev); + if (!vdev) + return; + + iommu_group_put(pdev->dev.iommu_group); + kfree(vdev); +} + +static struct pci_driver vfio_pci_driver = { + .name = "vfio-pci", + .id_table = NULL, /* only dynamic ids */ + .probe = vfio_pci_probe, + .remove = vfio_pci_remove, +}; + +static void __exit vfio_pci_cleanup(void) +{ + pci_unregister_driver(&vfio_pci_driver); + vfio_pci_virqfd_exit(); + vfio_pci_uninit_perm_bits(); +} + +static int __init vfio_pci_init(void) +{ + int ret; + + /* Allocate shared config space permision data used by all devices */ + ret = vfio_pci_init_perm_bits(); + if (ret) + return ret; + + /* Start the virqfd cleanup handler */ + ret = vfio_pci_virqfd_init(); + if (ret) + goto out_virqfd; + + /* Register and scan for devices */ + ret = pci_register_driver(&vfio_pci_driver); + if (ret) + goto out_driver; + + return 0; + +out_virqfd: + vfio_pci_virqfd_exit(); +out_driver: + vfio_pci_uninit_perm_bits(); + return ret; +} + +module_init(vfio_pci_init); +module_exit(vfio_pci_cleanup); + +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c new file mode 100644 index 0000000000000000000000000000000000000000..8b8f7d11e102108eb0195283281a928053bdd720 --- /dev/null +++ b/drivers/vfio/pci/vfio_pci_config.c @@ -0,0 +1,1540 @@ +/* + * VFIO PCI config space virtualization + * + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from original vfio: + * Copyright 2010 Cisco Systems, Inc. All rights reserved. + * Author: Tom Lyon, pugs@cisco.com + */ + +/* + * This code handles reading and writing of PCI configuration registers. + * This is hairy because we want to allow a lot of flexibility to the + * user driver, but cannot trust it with all of the config fields. + * Tables determine which fields can be read and written, as well as + * which fields are 'virtualized' - special actions and translations to + * make it appear to the user that he has control, when in fact things + * must be negotiated with the underlying OS. + */ + +#include +#include +#include +#include + +#include "vfio_pci_private.h" + +#define PCI_CFG_SPACE_SIZE 256 + +/* Useful "pseudo" capabilities */ +#define PCI_CAP_ID_BASIC 0 +#define PCI_CAP_ID_INVALID 0xFF + +#define is_bar(offset) \ + ((offset >= PCI_BASE_ADDRESS_0 && offset < PCI_BASE_ADDRESS_5 + 4) || \ + (offset >= PCI_ROM_ADDRESS && offset < PCI_ROM_ADDRESS + 4)) + +/* + * Lengths of PCI Config Capabilities + * 0: Removed from the user visible capability list + * FF: Variable length + */ +static u8 pci_cap_length[] = { + [PCI_CAP_ID_BASIC] = PCI_STD_HEADER_SIZEOF, /* pci config header */ + [PCI_CAP_ID_PM] = PCI_PM_SIZEOF, + [PCI_CAP_ID_AGP] = PCI_AGP_SIZEOF, + [PCI_CAP_ID_VPD] = PCI_CAP_VPD_SIZEOF, + [PCI_CAP_ID_SLOTID] = 0, /* bridge - don't care */ + [PCI_CAP_ID_MSI] = 0xFF, /* 10, 14, 20, or 24 */ + [PCI_CAP_ID_CHSWP] = 0, /* cpci - not yet */ + [PCI_CAP_ID_PCIX] = 0xFF, /* 8 or 24 */ + [PCI_CAP_ID_HT] = 0xFF, /* hypertransport */ + [PCI_CAP_ID_VNDR] = 0xFF, /* variable */ + [PCI_CAP_ID_DBG] = 0, /* debug - don't care */ + [PCI_CAP_ID_CCRC] = 0, /* cpci - not yet */ + [PCI_CAP_ID_SHPC] = 0, /* hotswap - not yet */ + [PCI_CAP_ID_SSVID] = 0, /* bridge - don't care */ + [PCI_CAP_ID_AGP3] = 0, /* AGP8x - not yet */ + [PCI_CAP_ID_SECDEV] = 0, /* secure device not yet */ + [PCI_CAP_ID_EXP] = 0xFF, /* 20 or 44 */ + [PCI_CAP_ID_MSIX] = PCI_CAP_MSIX_SIZEOF, + [PCI_CAP_ID_SATA] = 0xFF, + [PCI_CAP_ID_AF] = PCI_CAP_AF_SIZEOF, +}; + +/* + * Lengths of PCIe/PCI-X Extended Config Capabilities + * 0: Removed or masked from the user visible capabilty list + * FF: Variable length + */ +static u16 pci_ext_cap_length[] = { + [PCI_EXT_CAP_ID_ERR] = PCI_ERR_ROOT_COMMAND, + [PCI_EXT_CAP_ID_VC] = 0xFF, + [PCI_EXT_CAP_ID_DSN] = PCI_EXT_CAP_DSN_SIZEOF, + [PCI_EXT_CAP_ID_PWR] = PCI_EXT_CAP_PWR_SIZEOF, + [PCI_EXT_CAP_ID_RCLD] = 0, /* root only - don't care */ + [PCI_EXT_CAP_ID_RCILC] = 0, /* root only - don't care */ + [PCI_EXT_CAP_ID_RCEC] = 0, /* root only - don't care */ + [PCI_EXT_CAP_ID_MFVC] = 0xFF, + [PCI_EXT_CAP_ID_VC9] = 0xFF, /* same as CAP_ID_VC */ + [PCI_EXT_CAP_ID_RCRB] = 0, /* root only - don't care */ + [PCI_EXT_CAP_ID_VNDR] = 0xFF, + [PCI_EXT_CAP_ID_CAC] = 0, /* obsolete */ + [PCI_EXT_CAP_ID_ACS] = 0xFF, + [PCI_EXT_CAP_ID_ARI] = PCI_EXT_CAP_ARI_SIZEOF, + [PCI_EXT_CAP_ID_ATS] = PCI_EXT_CAP_ATS_SIZEOF, + [PCI_EXT_CAP_ID_SRIOV] = PCI_EXT_CAP_SRIOV_SIZEOF, + [PCI_EXT_CAP_ID_MRIOV] = 0, /* not yet */ + [PCI_EXT_CAP_ID_MCAST] = PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF, + [PCI_EXT_CAP_ID_PRI] = PCI_EXT_CAP_PRI_SIZEOF, + [PCI_EXT_CAP_ID_AMD_XXX] = 0, /* not yet */ + [PCI_EXT_CAP_ID_REBAR] = 0xFF, + [PCI_EXT_CAP_ID_DPA] = 0xFF, + [PCI_EXT_CAP_ID_TPH] = 0xFF, + [PCI_EXT_CAP_ID_LTR] = PCI_EXT_CAP_LTR_SIZEOF, + [PCI_EXT_CAP_ID_SECPCI] = 0, /* not yet */ + [PCI_EXT_CAP_ID_PMUX] = 0, /* not yet */ + [PCI_EXT_CAP_ID_PASID] = 0, /* not yet */ +}; + +/* + * Read/Write Permission Bits - one bit for each bit in capability + * Any field can be read if it exists, but what is read depends on + * whether the field is 'virtualized', or just pass thru to the + * hardware. Any virtualized field is also virtualized for writes. + * Writes are only permitted if they have a 1 bit here. + */ +struct perm_bits { + u8 *virt; /* read/write virtual data, not hw */ + u8 *write; /* writeable bits */ + int (*readfn)(struct vfio_pci_device *vdev, int pos, int count, + struct perm_bits *perm, int offset, __le32 *val); + int (*writefn)(struct vfio_pci_device *vdev, int pos, int count, + struct perm_bits *perm, int offset, __le32 val); +}; + +#define NO_VIRT 0 +#define ALL_VIRT 0xFFFFFFFFU +#define NO_WRITE 0 +#define ALL_WRITE 0xFFFFFFFFU + +static int vfio_user_config_read(struct pci_dev *pdev, int offset, + __le32 *val, int count) +{ + int ret = -EINVAL; + u32 tmp_val = 0; + + switch (count) { + case 1: + { + u8 tmp; + ret = pci_user_read_config_byte(pdev, offset, &tmp); + tmp_val = tmp; + break; + } + case 2: + { + u16 tmp; + ret = pci_user_read_config_word(pdev, offset, &tmp); + tmp_val = tmp; + break; + } + case 4: + ret = pci_user_read_config_dword(pdev, offset, &tmp_val); + break; + } + + *val = cpu_to_le32(tmp_val); + + return pcibios_err_to_errno(ret); +} + +static int vfio_user_config_write(struct pci_dev *pdev, int offset, + __le32 val, int count) +{ + int ret = -EINVAL; + u32 tmp_val = le32_to_cpu(val); + + switch (count) { + case 1: + ret = pci_user_write_config_byte(pdev, offset, tmp_val); + break; + case 2: + ret = pci_user_write_config_word(pdev, offset, tmp_val); + break; + case 4: + ret = pci_user_write_config_dword(pdev, offset, tmp_val); + break; + } + + return pcibios_err_to_errno(ret); +} + +static int vfio_default_config_read(struct vfio_pci_device *vdev, int pos, + int count, struct perm_bits *perm, + int offset, __le32 *val) +{ + __le32 virt = 0; + + memcpy(val, vdev->vconfig + pos, count); + + memcpy(&virt, perm->virt + offset, count); + + /* Any non-virtualized bits? */ + if (cpu_to_le32(~0U >> (32 - (count * 8))) != virt) { + struct pci_dev *pdev = vdev->pdev; + __le32 phys_val = 0; + int ret; + + ret = vfio_user_config_read(pdev, pos, &phys_val, count); + if (ret) + return ret; + + *val = (phys_val & ~virt) | (*val & virt); + } + + return count; +} + +static int vfio_default_config_write(struct vfio_pci_device *vdev, int pos, + int count, struct perm_bits *perm, + int offset, __le32 val) +{ + __le32 virt = 0, write = 0; + + memcpy(&write, perm->write + offset, count); + + if (!write) + return count; /* drop, no writable bits */ + + memcpy(&virt, perm->virt + offset, count); + + /* Virtualized and writable bits go to vconfig */ + if (write & virt) { + __le32 virt_val = 0; + + memcpy(&virt_val, vdev->vconfig + pos, count); + + virt_val &= ~(write & virt); + virt_val |= (val & (write & virt)); + + memcpy(vdev->vconfig + pos, &virt_val, count); + } + + /* Non-virtualzed and writable bits go to hardware */ + if (write & ~virt) { + struct pci_dev *pdev = vdev->pdev; + __le32 phys_val = 0; + int ret; + + ret = vfio_user_config_read(pdev, pos, &phys_val, count); + if (ret) + return ret; + + phys_val &= ~(write & ~virt); + phys_val |= (val & (write & ~virt)); + + ret = vfio_user_config_write(pdev, pos, phys_val, count); + if (ret) + return ret; + } + + return count; +} + +/* Allow direct read from hardware, except for capability next pointer */ +static int vfio_direct_config_read(struct vfio_pci_device *vdev, int pos, + int count, struct perm_bits *perm, + int offset, __le32 *val) +{ + int ret; + + ret = vfio_user_config_read(vdev->pdev, pos, val, count); + if (ret) + return pcibios_err_to_errno(ret); + + if (pos >= PCI_CFG_SPACE_SIZE) { /* Extended cap header mangling */ + if (offset < 4) + memcpy(val, vdev->vconfig + pos, count); + } else if (pos >= PCI_STD_HEADER_SIZEOF) { /* Std cap mangling */ + if (offset == PCI_CAP_LIST_ID && count > 1) + memcpy(val, vdev->vconfig + pos, + min(PCI_CAP_FLAGS, count)); + else if (offset == PCI_CAP_LIST_NEXT) + memcpy(val, vdev->vconfig + pos, 1); + } + + return count; +} + +static int vfio_direct_config_write(struct vfio_pci_device *vdev, int pos, + int count, struct perm_bits *perm, + int offset, __le32 val) +{ + int ret; + + ret = vfio_user_config_write(vdev->pdev, pos, val, count); + if (ret) + return ret; + + return count; +} + +/* Default all regions to read-only, no-virtualization */ +static struct perm_bits cap_perms[PCI_CAP_ID_MAX + 1] = { + [0 ... PCI_CAP_ID_MAX] = { .readfn = vfio_direct_config_read } +}; +static struct perm_bits ecap_perms[PCI_EXT_CAP_ID_MAX + 1] = { + [0 ... PCI_EXT_CAP_ID_MAX] = { .readfn = vfio_direct_config_read } +}; + +static void free_perm_bits(struct perm_bits *perm) +{ + kfree(perm->virt); + kfree(perm->write); + perm->virt = NULL; + perm->write = NULL; +} + +static int alloc_perm_bits(struct perm_bits *perm, int size) +{ + /* + * Round up all permission bits to the next dword, this lets us + * ignore whether a read/write exceeds the defined capability + * structure. We can do this because: + * - Standard config space is already dword aligned + * - Capabilities are all dword alinged (bits 0:1 of next reserved) + * - Express capabilities defined as dword aligned + */ + size = round_up(size, 4); + + /* + * Zero state is + * - All Readable, None Writeable, None Virtualized + */ + perm->virt = kzalloc(size, GFP_KERNEL); + perm->write = kzalloc(size, GFP_KERNEL); + if (!perm->virt || !perm->write) { + free_perm_bits(perm); + return -ENOMEM; + } + + perm->readfn = vfio_default_config_read; + perm->writefn = vfio_default_config_write; + + return 0; +} + +/* + * Helper functions for filling in permission tables + */ +static inline void p_setb(struct perm_bits *p, int off, u8 virt, u8 write) +{ + p->virt[off] = virt; + p->write[off] = write; +} + +/* Handle endian-ness - pci and tables are little-endian */ +static inline void p_setw(struct perm_bits *p, int off, u16 virt, u16 write) +{ + *(__le16 *)(&p->virt[off]) = cpu_to_le16(virt); + *(__le16 *)(&p->write[off]) = cpu_to_le16(write); +} + +/* Handle endian-ness - pci and tables are little-endian */ +static inline void p_setd(struct perm_bits *p, int off, u32 virt, u32 write) +{ + *(__le32 *)(&p->virt[off]) = cpu_to_le32(virt); + *(__le32 *)(&p->write[off]) = cpu_to_le32(write); +} + +/* + * Restore the *real* BARs after we detect a FLR or backdoor reset. + * (backdoor = some device specific technique that we didn't catch) + */ +static void vfio_bar_restore(struct vfio_pci_device *vdev) +{ + struct pci_dev *pdev = vdev->pdev; + u32 *rbar = vdev->rbar; + int i; + + if (pdev->is_virtfn) + return; + + pr_info("%s: %s reset recovery - restoring bars\n", + __func__, dev_name(&pdev->dev)); + + for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4, rbar++) + pci_user_write_config_dword(pdev, i, *rbar); + + pci_user_write_config_dword(pdev, PCI_ROM_ADDRESS, *rbar); +} + +static __le32 vfio_generate_bar_flags(struct pci_dev *pdev, int bar) +{ + unsigned long flags = pci_resource_flags(pdev, bar); + u32 val; + + if (flags & IORESOURCE_IO) + return cpu_to_le32(PCI_BASE_ADDRESS_SPACE_IO); + + val = PCI_BASE_ADDRESS_SPACE_MEMORY; + + if (flags & IORESOURCE_PREFETCH) + val |= PCI_BASE_ADDRESS_MEM_PREFETCH; + + if (flags & IORESOURCE_MEM_64) + val |= PCI_BASE_ADDRESS_MEM_TYPE_64; + + return cpu_to_le32(val); +} + +/* + * Pretend we're hardware and tweak the values of the *virtual* PCI BARs + * to reflect the hardware capabilities. This implements BAR sizing. + */ +static void vfio_bar_fixup(struct vfio_pci_device *vdev) +{ + struct pci_dev *pdev = vdev->pdev; + int i; + __le32 *bar; + u64 mask; + + bar = (__le32 *)&vdev->vconfig[PCI_BASE_ADDRESS_0]; + + for (i = PCI_STD_RESOURCES; i <= PCI_STD_RESOURCE_END; i++, bar++) { + if (!pci_resource_start(pdev, i)) { + *bar = 0; /* Unmapped by host = unimplemented to user */ + continue; + } + + mask = ~(pci_resource_len(pdev, i) - 1); + + *bar &= cpu_to_le32((u32)mask); + *bar |= vfio_generate_bar_flags(pdev, i); + + if (*bar & cpu_to_le32(PCI_BASE_ADDRESS_MEM_TYPE_64)) { + bar++; + *bar &= cpu_to_le32((u32)(mask >> 32)); + i++; + } + } + + bar = (__le32 *)&vdev->vconfig[PCI_ROM_ADDRESS]; + + /* + * NB. we expose the actual BAR size here, regardless of whether + * we can read it. When we report the REGION_INFO for the ROM + * we report what PCI tells us is the actual ROM size. + */ + if (pci_resource_start(pdev, PCI_ROM_RESOURCE)) { + mask = ~(pci_resource_len(pdev, PCI_ROM_RESOURCE) - 1); + mask |= PCI_ROM_ADDRESS_ENABLE; + *bar &= cpu_to_le32((u32)mask); + } else + *bar = 0; + + vdev->bardirty = false; +} + +static int vfio_basic_config_read(struct vfio_pci_device *vdev, int pos, + int count, struct perm_bits *perm, + int offset, __le32 *val) +{ + if (is_bar(offset)) /* pos == offset for basic config */ + vfio_bar_fixup(vdev); + + count = vfio_default_config_read(vdev, pos, count, perm, offset, val); + + /* Mask in virtual memory enable for SR-IOV devices */ + if (offset == PCI_COMMAND && vdev->pdev->is_virtfn) { + u16 cmd = le16_to_cpu(*(__le16 *)&vdev->vconfig[PCI_COMMAND]); + u32 tmp_val = le32_to_cpu(*val); + + tmp_val |= cmd & PCI_COMMAND_MEMORY; + *val = cpu_to_le32(tmp_val); + } + + return count; +} + +static int vfio_basic_config_write(struct vfio_pci_device *vdev, int pos, + int count, struct perm_bits *perm, + int offset, __le32 val) +{ + struct pci_dev *pdev = vdev->pdev; + __le16 *virt_cmd; + u16 new_cmd = 0; + int ret; + + virt_cmd = (__le16 *)&vdev->vconfig[PCI_COMMAND]; + + if (offset == PCI_COMMAND) { + bool phys_mem, virt_mem, new_mem, phys_io, virt_io, new_io; + u16 phys_cmd; + + ret = pci_user_read_config_word(pdev, PCI_COMMAND, &phys_cmd); + if (ret) + return ret; + + new_cmd = le32_to_cpu(val); + + phys_mem = !!(phys_cmd & PCI_COMMAND_MEMORY); + virt_mem = !!(le16_to_cpu(*virt_cmd) & PCI_COMMAND_MEMORY); + new_mem = !!(new_cmd & PCI_COMMAND_MEMORY); + + phys_io = !!(phys_cmd & PCI_COMMAND_IO); + virt_io = !!(le16_to_cpu(*virt_cmd) & PCI_COMMAND_IO); + new_io = !!(new_cmd & PCI_COMMAND_IO); + + /* + * If the user is writing mem/io enable (new_mem/io) and we + * think it's already enabled (virt_mem/io), but the hardware + * shows it disabled (phys_mem/io, then the device has + * undergone some kind of backdoor reset and needs to be + * restored before we allow it to enable the bars. + * SR-IOV devices will trigger this, but we catch them later + */ + if ((new_mem && virt_mem && !phys_mem) || + (new_io && virt_io && !phys_io)) + vfio_bar_restore(vdev); + } + + count = vfio_default_config_write(vdev, pos, count, perm, offset, val); + if (count < 0) + return count; + + /* + * Save current memory/io enable bits in vconfig to allow for + * the test above next time. + */ + if (offset == PCI_COMMAND) { + u16 mask = PCI_COMMAND_MEMORY | PCI_COMMAND_IO; + + *virt_cmd &= cpu_to_le16(~mask); + *virt_cmd |= cpu_to_le16(new_cmd & mask); + } + + /* Emulate INTx disable */ + if (offset >= PCI_COMMAND && offset <= PCI_COMMAND + 1) { + bool virt_intx_disable; + + virt_intx_disable = !!(le16_to_cpu(*virt_cmd) & + PCI_COMMAND_INTX_DISABLE); + + if (virt_intx_disable && !vdev->virq_disabled) { + vdev->virq_disabled = true; + vfio_pci_intx_mask(vdev); + } else if (!virt_intx_disable && vdev->virq_disabled) { + vdev->virq_disabled = false; + vfio_pci_intx_unmask(vdev); + } + } + + if (is_bar(offset)) + vdev->bardirty = true; + + return count; +} + +/* Permissions for the Basic PCI Header */ +static int __init init_pci_cap_basic_perm(struct perm_bits *perm) +{ + if (alloc_perm_bits(perm, PCI_STD_HEADER_SIZEOF)) + return -ENOMEM; + + perm->readfn = vfio_basic_config_read; + perm->writefn = vfio_basic_config_write; + + /* Virtualized for SR-IOV functions, which just have FFFF */ + p_setw(perm, PCI_VENDOR_ID, (u16)ALL_VIRT, NO_WRITE); + p_setw(perm, PCI_DEVICE_ID, (u16)ALL_VIRT, NO_WRITE); + + /* + * Virtualize INTx disable, we use it internally for interrupt + * control and can emulate it for non-PCI 2.3 devices. + */ + p_setw(perm, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE, (u16)ALL_WRITE); + + /* Virtualize capability list, we might want to skip/disable */ + p_setw(perm, PCI_STATUS, PCI_STATUS_CAP_LIST, NO_WRITE); + + /* No harm to write */ + p_setb(perm, PCI_CACHE_LINE_SIZE, NO_VIRT, (u8)ALL_WRITE); + p_setb(perm, PCI_LATENCY_TIMER, NO_VIRT, (u8)ALL_WRITE); + p_setb(perm, PCI_BIST, NO_VIRT, (u8)ALL_WRITE); + + /* Virtualize all bars, can't touch the real ones */ + p_setd(perm, PCI_BASE_ADDRESS_0, ALL_VIRT, ALL_WRITE); + p_setd(perm, PCI_BASE_ADDRESS_1, ALL_VIRT, ALL_WRITE); + p_setd(perm, PCI_BASE_ADDRESS_2, ALL_VIRT, ALL_WRITE); + p_setd(perm, PCI_BASE_ADDRESS_3, ALL_VIRT, ALL_WRITE); + p_setd(perm, PCI_BASE_ADDRESS_4, ALL_VIRT, ALL_WRITE); + p_setd(perm, PCI_BASE_ADDRESS_5, ALL_VIRT, ALL_WRITE); + p_setd(perm, PCI_ROM_ADDRESS, ALL_VIRT, ALL_WRITE); + + /* Allow us to adjust capability chain */ + p_setb(perm, PCI_CAPABILITY_LIST, (u8)ALL_VIRT, NO_WRITE); + + /* Sometimes used by sw, just virtualize */ + p_setb(perm, PCI_INTERRUPT_LINE, (u8)ALL_VIRT, (u8)ALL_WRITE); + return 0; +} + +/* Permissions for the Power Management capability */ +static int __init init_pci_cap_pm_perm(struct perm_bits *perm) +{ + if (alloc_perm_bits(perm, pci_cap_length[PCI_CAP_ID_PM])) + return -ENOMEM; + + /* + * We always virtualize the next field so we can remove + * capabilities from the chain if we want to. + */ + p_setb(perm, PCI_CAP_LIST_NEXT, (u8)ALL_VIRT, NO_WRITE); + + /* + * Power management is defined *per function*, + * so we let the user write this + */ + p_setd(perm, PCI_PM_CTRL, NO_VIRT, ALL_WRITE); + return 0; +} + +/* Permissions for PCI-X capability */ +static int __init init_pci_cap_pcix_perm(struct perm_bits *perm) +{ + /* Alloc 24, but only 8 are used in v0 */ + if (alloc_perm_bits(perm, PCI_CAP_PCIX_SIZEOF_V2)) + return -ENOMEM; + + p_setb(perm, PCI_CAP_LIST_NEXT, (u8)ALL_VIRT, NO_WRITE); + + p_setw(perm, PCI_X_CMD, NO_VIRT, (u16)ALL_WRITE); + p_setd(perm, PCI_X_ECC_CSR, NO_VIRT, ALL_WRITE); + return 0; +} + +/* Permissions for PCI Express capability */ +static int __init init_pci_cap_exp_perm(struct perm_bits *perm) +{ + /* Alloc larger of two possible sizes */ + if (alloc_perm_bits(perm, PCI_CAP_EXP_ENDPOINT_SIZEOF_V2)) + return -ENOMEM; + + p_setb(perm, PCI_CAP_LIST_NEXT, (u8)ALL_VIRT, NO_WRITE); + + /* + * Allow writes to device control fields (includes FLR!) + * but not to devctl_phantom which could confuse IOMMU + * or to the ARI bit in devctl2 which is set at probe time + */ + p_setw(perm, PCI_EXP_DEVCTL, NO_VIRT, ~PCI_EXP_DEVCTL_PHANTOM); + p_setw(perm, PCI_EXP_DEVCTL2, NO_VIRT, ~PCI_EXP_DEVCTL2_ARI); + return 0; +} + +/* Permissions for Advanced Function capability */ +static int __init init_pci_cap_af_perm(struct perm_bits *perm) +{ + if (alloc_perm_bits(perm, pci_cap_length[PCI_CAP_ID_AF])) + return -ENOMEM; + + p_setb(perm, PCI_CAP_LIST_NEXT, (u8)ALL_VIRT, NO_WRITE); + p_setb(perm, PCI_AF_CTRL, NO_VIRT, PCI_AF_CTRL_FLR); + return 0; +} + +/* Permissions for Advanced Error Reporting extended capability */ +static int __init init_pci_ext_cap_err_perm(struct perm_bits *perm) +{ + u32 mask; + + if (alloc_perm_bits(perm, pci_ext_cap_length[PCI_EXT_CAP_ID_ERR])) + return -ENOMEM; + + /* + * Virtualize the first dword of all express capabilities + * because it includes the next pointer. This lets us later + * remove capabilities from the chain if we need to. + */ + p_setd(perm, 0, ALL_VIRT, NO_WRITE); + + /* Writable bits mask */ + mask = PCI_ERR_UNC_TRAIN | /* Training */ + PCI_ERR_UNC_DLP | /* Data Link Protocol */ + PCI_ERR_UNC_SURPDN | /* Surprise Down */ + PCI_ERR_UNC_POISON_TLP | /* Poisoned TLP */ + PCI_ERR_UNC_FCP | /* Flow Control Protocol */ + PCI_ERR_UNC_COMP_TIME | /* Completion Timeout */ + PCI_ERR_UNC_COMP_ABORT | /* Completer Abort */ + PCI_ERR_UNC_UNX_COMP | /* Unexpected Completion */ + PCI_ERR_UNC_RX_OVER | /* Receiver Overflow */ + PCI_ERR_UNC_MALF_TLP | /* Malformed TLP */ + PCI_ERR_UNC_ECRC | /* ECRC Error Status */ + PCI_ERR_UNC_UNSUP | /* Unsupported Request */ + PCI_ERR_UNC_ACSV | /* ACS Violation */ + PCI_ERR_UNC_INTN | /* internal error */ + PCI_ERR_UNC_MCBTLP | /* MC blocked TLP */ + PCI_ERR_UNC_ATOMEG | /* Atomic egress blocked */ + PCI_ERR_UNC_TLPPRE; /* TLP prefix blocked */ + p_setd(perm, PCI_ERR_UNCOR_STATUS, NO_VIRT, mask); + p_setd(perm, PCI_ERR_UNCOR_MASK, NO_VIRT, mask); + p_setd(perm, PCI_ERR_UNCOR_SEVER, NO_VIRT, mask); + + mask = PCI_ERR_COR_RCVR | /* Receiver Error Status */ + PCI_ERR_COR_BAD_TLP | /* Bad TLP Status */ + PCI_ERR_COR_BAD_DLLP | /* Bad DLLP Status */ + PCI_ERR_COR_REP_ROLL | /* REPLAY_NUM Rollover */ + PCI_ERR_COR_REP_TIMER | /* Replay Timer Timeout */ + PCI_ERR_COR_ADV_NFAT | /* Advisory Non-Fatal */ + PCI_ERR_COR_INTERNAL | /* Corrected Internal */ + PCI_ERR_COR_LOG_OVER; /* Header Log Overflow */ + p_setd(perm, PCI_ERR_COR_STATUS, NO_VIRT, mask); + p_setd(perm, PCI_ERR_COR_MASK, NO_VIRT, mask); + + mask = PCI_ERR_CAP_ECRC_GENE | /* ECRC Generation Enable */ + PCI_ERR_CAP_ECRC_CHKE; /* ECRC Check Enable */ + p_setd(perm, PCI_ERR_CAP, NO_VIRT, mask); + return 0; +} + +/* Permissions for Power Budgeting extended capability */ +static int __init init_pci_ext_cap_pwr_perm(struct perm_bits *perm) +{ + if (alloc_perm_bits(perm, pci_ext_cap_length[PCI_EXT_CAP_ID_PWR])) + return -ENOMEM; + + p_setd(perm, 0, ALL_VIRT, NO_WRITE); + + /* Writing the data selector is OK, the info is still read-only */ + p_setb(perm, PCI_PWR_DATA, NO_VIRT, (u8)ALL_WRITE); + return 0; +} + +/* + * Initialize the shared permission tables + */ +void vfio_pci_uninit_perm_bits(void) +{ + free_perm_bits(&cap_perms[PCI_CAP_ID_BASIC]); + + free_perm_bits(&cap_perms[PCI_CAP_ID_PM]); + free_perm_bits(&cap_perms[PCI_CAP_ID_PCIX]); + free_perm_bits(&cap_perms[PCI_CAP_ID_EXP]); + free_perm_bits(&cap_perms[PCI_CAP_ID_AF]); + + free_perm_bits(&ecap_perms[PCI_EXT_CAP_ID_ERR]); + free_perm_bits(&ecap_perms[PCI_EXT_CAP_ID_PWR]); +} + +int __init vfio_pci_init_perm_bits(void) +{ + int ret; + + /* Basic config space */ + ret = init_pci_cap_basic_perm(&cap_perms[PCI_CAP_ID_BASIC]); + + /* Capabilities */ + ret |= init_pci_cap_pm_perm(&cap_perms[PCI_CAP_ID_PM]); + cap_perms[PCI_CAP_ID_VPD].writefn = vfio_direct_config_write; + ret |= init_pci_cap_pcix_perm(&cap_perms[PCI_CAP_ID_PCIX]); + cap_perms[PCI_CAP_ID_VNDR].writefn = vfio_direct_config_write; + ret |= init_pci_cap_exp_perm(&cap_perms[PCI_CAP_ID_EXP]); + ret |= init_pci_cap_af_perm(&cap_perms[PCI_CAP_ID_AF]); + + /* Extended capabilities */ + ret |= init_pci_ext_cap_err_perm(&ecap_perms[PCI_EXT_CAP_ID_ERR]); + ret |= init_pci_ext_cap_pwr_perm(&ecap_perms[PCI_EXT_CAP_ID_PWR]); + ecap_perms[PCI_EXT_CAP_ID_VNDR].writefn = vfio_direct_config_write; + + if (ret) + vfio_pci_uninit_perm_bits(); + + return ret; +} + +static int vfio_find_cap_start(struct vfio_pci_device *vdev, int pos) +{ + u8 cap; + int base = (pos >= PCI_CFG_SPACE_SIZE) ? PCI_CFG_SPACE_SIZE : + PCI_STD_HEADER_SIZEOF; + base /= 4; + pos /= 4; + + cap = vdev->pci_config_map[pos]; + + if (cap == PCI_CAP_ID_BASIC) + return 0; + + /* XXX Can we have to abutting capabilities of the same type? */ + while (pos - 1 >= base && vdev->pci_config_map[pos - 1] == cap) + pos--; + + return pos * 4; +} + +static int vfio_msi_config_read(struct vfio_pci_device *vdev, int pos, + int count, struct perm_bits *perm, + int offset, __le32 *val) +{ + /* Update max available queue size from msi_qmax */ + if (offset <= PCI_MSI_FLAGS && offset + count >= PCI_MSI_FLAGS) { + __le16 *flags; + int start; + + start = vfio_find_cap_start(vdev, pos); + + flags = (__le16 *)&vdev->vconfig[start]; + + *flags &= cpu_to_le16(~PCI_MSI_FLAGS_QMASK); + *flags |= cpu_to_le16(vdev->msi_qmax << 1); + } + + return vfio_default_config_read(vdev, pos, count, perm, offset, val); +} + +static int vfio_msi_config_write(struct vfio_pci_device *vdev, int pos, + int count, struct perm_bits *perm, + int offset, __le32 val) +{ + count = vfio_default_config_write(vdev, pos, count, perm, offset, val); + if (count < 0) + return count; + + /* Fixup and write configured queue size and enable to hardware */ + if (offset <= PCI_MSI_FLAGS && offset + count >= PCI_MSI_FLAGS) { + __le16 *pflags; + u16 flags; + int start, ret; + + start = vfio_find_cap_start(vdev, pos); + + pflags = (__le16 *)&vdev->vconfig[start + PCI_MSI_FLAGS]; + + flags = le16_to_cpu(*pflags); + + /* MSI is enabled via ioctl */ + if (!is_msi(vdev)) + flags &= ~PCI_MSI_FLAGS_ENABLE; + + /* Check queue size */ + if ((flags & PCI_MSI_FLAGS_QSIZE) >> 4 > vdev->msi_qmax) { + flags &= ~PCI_MSI_FLAGS_QSIZE; + flags |= vdev->msi_qmax << 4; + } + + /* Write back to virt and to hardware */ + *pflags = cpu_to_le16(flags); + ret = pci_user_write_config_word(vdev->pdev, + start + PCI_MSI_FLAGS, + flags); + if (ret) + return pcibios_err_to_errno(ret); + } + + return count; +} + +/* + * MSI determination is per-device, so this routine gets used beyond + * initialization time. Don't add __init + */ +static int init_pci_cap_msi_perm(struct perm_bits *perm, int len, u16 flags) +{ + if (alloc_perm_bits(perm, len)) + return -ENOMEM; + + perm->readfn = vfio_msi_config_read; + perm->writefn = vfio_msi_config_write; + + p_setb(perm, PCI_CAP_LIST_NEXT, (u8)ALL_VIRT, NO_WRITE); + + /* + * The upper byte of the control register is reserved, + * just setup the lower byte. + */ + p_setb(perm, PCI_MSI_FLAGS, (u8)ALL_VIRT, (u8)ALL_WRITE); + p_setd(perm, PCI_MSI_ADDRESS_LO, ALL_VIRT, ALL_WRITE); + if (flags & PCI_MSI_FLAGS_64BIT) { + p_setd(perm, PCI_MSI_ADDRESS_HI, ALL_VIRT, ALL_WRITE); + p_setw(perm, PCI_MSI_DATA_64, (u16)ALL_VIRT, (u16)ALL_WRITE); + if (flags & PCI_MSI_FLAGS_MASKBIT) { + p_setd(perm, PCI_MSI_MASK_64, NO_VIRT, ALL_WRITE); + p_setd(perm, PCI_MSI_PENDING_64, NO_VIRT, ALL_WRITE); + } + } else { + p_setw(perm, PCI_MSI_DATA_32, (u16)ALL_VIRT, (u16)ALL_WRITE); + if (flags & PCI_MSI_FLAGS_MASKBIT) { + p_setd(perm, PCI_MSI_MASK_32, NO_VIRT, ALL_WRITE); + p_setd(perm, PCI_MSI_PENDING_32, NO_VIRT, ALL_WRITE); + } + } + return 0; +} + +/* Determine MSI CAP field length; initialize msi_perms on 1st call per vdev */ +static int vfio_msi_cap_len(struct vfio_pci_device *vdev, u8 pos) +{ + struct pci_dev *pdev = vdev->pdev; + int len, ret; + u16 flags; + + ret = pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &flags); + if (ret) + return pcibios_err_to_errno(ret); + + len = 10; /* Minimum size */ + if (flags & PCI_MSI_FLAGS_64BIT) + len += 4; + if (flags & PCI_MSI_FLAGS_MASKBIT) + len += 10; + + if (vdev->msi_perm) + return len; + + vdev->msi_perm = kmalloc(sizeof(struct perm_bits), GFP_KERNEL); + if (!vdev->msi_perm) + return -ENOMEM; + + ret = init_pci_cap_msi_perm(vdev->msi_perm, len, flags); + if (ret) + return ret; + + return len; +} + +/* Determine extended capability length for VC (2 & 9) and MFVC */ +static int vfio_vc_cap_len(struct vfio_pci_device *vdev, u16 pos) +{ + struct pci_dev *pdev = vdev->pdev; + u32 tmp; + int ret, evcc, phases, vc_arb; + int len = PCI_CAP_VC_BASE_SIZEOF; + + ret = pci_read_config_dword(pdev, pos + PCI_VC_PORT_REG1, &tmp); + if (ret) + return pcibios_err_to_errno(ret); + + evcc = tmp & PCI_VC_REG1_EVCC; /* extended vc count */ + ret = pci_read_config_dword(pdev, pos + PCI_VC_PORT_REG2, &tmp); + if (ret) + return pcibios_err_to_errno(ret); + + if (tmp & PCI_VC_REG2_128_PHASE) + phases = 128; + else if (tmp & PCI_VC_REG2_64_PHASE) + phases = 64; + else if (tmp & PCI_VC_REG2_32_PHASE) + phases = 32; + else + phases = 0; + + vc_arb = phases * 4; + + /* + * Port arbitration tables are root & switch only; + * function arbitration tables are function 0 only. + * In either case, we'll never let user write them so + * we don't care how big they are + */ + len += (1 + evcc) * PCI_CAP_VC_PER_VC_SIZEOF; + if (vc_arb) { + len = round_up(len, 16); + len += vc_arb / 8; + } + return len; +} + +static int vfio_cap_len(struct vfio_pci_device *vdev, u8 cap, u8 pos) +{ + struct pci_dev *pdev = vdev->pdev; + u16 word; + u8 byte; + int ret; + + switch (cap) { + case PCI_CAP_ID_MSI: + return vfio_msi_cap_len(vdev, pos); + case PCI_CAP_ID_PCIX: + ret = pci_read_config_word(pdev, pos + PCI_X_CMD, &word); + if (ret) + return pcibios_err_to_errno(ret); + + if (PCI_X_CMD_VERSION(word)) { + vdev->extended_caps = true; + return PCI_CAP_PCIX_SIZEOF_V2; + } else + return PCI_CAP_PCIX_SIZEOF_V0; + case PCI_CAP_ID_VNDR: + /* length follows next field */ + ret = pci_read_config_byte(pdev, pos + PCI_CAP_FLAGS, &byte); + if (ret) + return pcibios_err_to_errno(ret); + + return byte; + case PCI_CAP_ID_EXP: + /* length based on version */ + ret = pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &word); + if (ret) + return pcibios_err_to_errno(ret); + + if ((word & PCI_EXP_FLAGS_VERS) == 1) + return PCI_CAP_EXP_ENDPOINT_SIZEOF_V1; + else { + vdev->extended_caps = true; + return PCI_CAP_EXP_ENDPOINT_SIZEOF_V2; + } + case PCI_CAP_ID_HT: + ret = pci_read_config_byte(pdev, pos + 3, &byte); + if (ret) + return pcibios_err_to_errno(ret); + + return (byte & HT_3BIT_CAP_MASK) ? + HT_CAP_SIZEOF_SHORT : HT_CAP_SIZEOF_LONG; + case PCI_CAP_ID_SATA: + ret = pci_read_config_byte(pdev, pos + PCI_SATA_REGS, &byte); + if (ret) + return pcibios_err_to_errno(ret); + + byte &= PCI_SATA_REGS_MASK; + if (byte == PCI_SATA_REGS_INLINE) + return PCI_SATA_SIZEOF_LONG; + else + return PCI_SATA_SIZEOF_SHORT; + default: + pr_warn("%s: %s unknown length for pci cap 0x%x@0x%x\n", + dev_name(&pdev->dev), __func__, cap, pos); + } + + return 0; +} + +static int vfio_ext_cap_len(struct vfio_pci_device *vdev, u16 ecap, u16 epos) +{ + struct pci_dev *pdev = vdev->pdev; + u8 byte; + u32 dword; + int ret; + + switch (ecap) { + case PCI_EXT_CAP_ID_VNDR: + ret = pci_read_config_dword(pdev, epos + PCI_VSEC_HDR, &dword); + if (ret) + return pcibios_err_to_errno(ret); + + return dword >> PCI_VSEC_HDR_LEN_SHIFT; + case PCI_EXT_CAP_ID_VC: + case PCI_EXT_CAP_ID_VC9: + case PCI_EXT_CAP_ID_MFVC: + return vfio_vc_cap_len(vdev, epos); + case PCI_EXT_CAP_ID_ACS: + ret = pci_read_config_byte(pdev, epos + PCI_ACS_CAP, &byte); + if (ret) + return pcibios_err_to_errno(ret); + + if (byte & PCI_ACS_EC) { + int bits; + + ret = pci_read_config_byte(pdev, + epos + PCI_ACS_EGRESS_BITS, + &byte); + if (ret) + return pcibios_err_to_errno(ret); + + bits = byte ? round_up(byte, 32) : 256; + return 8 + (bits / 8); + } + return 8; + + case PCI_EXT_CAP_ID_REBAR: + ret = pci_read_config_byte(pdev, epos + PCI_REBAR_CTRL, &byte); + if (ret) + return pcibios_err_to_errno(ret); + + byte &= PCI_REBAR_CTRL_NBAR_MASK; + byte >>= PCI_REBAR_CTRL_NBAR_SHIFT; + + return 4 + (byte * 8); + case PCI_EXT_CAP_ID_DPA: + ret = pci_read_config_byte(pdev, epos + PCI_DPA_CAP, &byte); + if (ret) + return pcibios_err_to_errno(ret); + + byte &= PCI_DPA_CAP_SUBSTATE_MASK; + byte = round_up(byte + 1, 4); + return PCI_DPA_BASE_SIZEOF + byte; + case PCI_EXT_CAP_ID_TPH: + ret = pci_read_config_dword(pdev, epos + PCI_TPH_CAP, &dword); + if (ret) + return pcibios_err_to_errno(ret); + + if ((dword & PCI_TPH_CAP_LOC_MASK) == PCI_TPH_LOC_CAP) { + int sts; + + sts = byte & PCI_TPH_CAP_ST_MASK; + sts >>= PCI_TPH_CAP_ST_SHIFT; + return PCI_TPH_BASE_SIZEOF + round_up(sts * 2, 4); + } + return PCI_TPH_BASE_SIZEOF; + default: + pr_warn("%s: %s unknown length for pci ecap 0x%x@0x%x\n", + dev_name(&pdev->dev), __func__, ecap, epos); + } + + return 0; +} + +static int vfio_fill_vconfig_bytes(struct vfio_pci_device *vdev, + int offset, int size) +{ + struct pci_dev *pdev = vdev->pdev; + int ret = 0; + + /* + * We try to read physical config space in the largest chunks + * we can, assuming that all of the fields support dword access. + * pci_save_state() makes this same assumption and seems to do ok. + */ + while (size) { + int filled; + + if (size >= 4 && !(offset % 4)) { + __le32 *dwordp = (__le32 *)&vdev->vconfig[offset]; + u32 dword; + + ret = pci_read_config_dword(pdev, offset, &dword); + if (ret) + return ret; + *dwordp = cpu_to_le32(dword); + filled = 4; + } else if (size >= 2 && !(offset % 2)) { + __le16 *wordp = (__le16 *)&vdev->vconfig[offset]; + u16 word; + + ret = pci_read_config_word(pdev, offset, &word); + if (ret) + return ret; + *wordp = cpu_to_le16(word); + filled = 2; + } else { + u8 *byte = &vdev->vconfig[offset]; + ret = pci_read_config_byte(pdev, offset, byte); + if (ret) + return ret; + filled = 1; + } + + offset += filled; + size -= filled; + } + + return ret; +} + +static int vfio_cap_init(struct vfio_pci_device *vdev) +{ + struct pci_dev *pdev = vdev->pdev; + u8 *map = vdev->pci_config_map; + u16 status; + u8 pos, *prev, cap; + int loops, ret, caps = 0; + + /* Any capabilities? */ + ret = pci_read_config_word(pdev, PCI_STATUS, &status); + if (ret) + return ret; + + if (!(status & PCI_STATUS_CAP_LIST)) + return 0; /* Done */ + + ret = pci_read_config_byte(pdev, PCI_CAPABILITY_LIST, &pos); + if (ret) + return ret; + + /* Mark the previous position in case we want to skip a capability */ + prev = &vdev->vconfig[PCI_CAPABILITY_LIST]; + + /* We can bound our loop, capabilities are dword aligned */ + loops = (PCI_CFG_SPACE_SIZE - PCI_STD_HEADER_SIZEOF) / PCI_CAP_SIZEOF; + while (pos && loops--) { + u8 next; + int i, len = 0; + + ret = pci_read_config_byte(pdev, pos, &cap); + if (ret) + return ret; + + ret = pci_read_config_byte(pdev, + pos + PCI_CAP_LIST_NEXT, &next); + if (ret) + return ret; + + if (cap <= PCI_CAP_ID_MAX) { + len = pci_cap_length[cap]; + if (len == 0xFF) { /* Variable length */ + len = vfio_cap_len(vdev, cap, pos); + if (len < 0) + return len; + } + } + + if (!len) { + pr_info("%s: %s hiding cap 0x%x\n", + __func__, dev_name(&pdev->dev), cap); + *prev = next; + pos = next; + continue; + } + + /* Sanity check, do we overlap other capabilities? */ + for (i = 0; i < len; i += 4) { + if (likely(map[(pos + i) / 4] == PCI_CAP_ID_INVALID)) + continue; + + pr_warn("%s: %s pci config conflict @0x%x, was cap 0x%x now cap 0x%x\n", + __func__, dev_name(&pdev->dev), + pos + i, map[pos + i], cap); + } + + memset(map + (pos / 4), cap, len / 4); + ret = vfio_fill_vconfig_bytes(vdev, pos, len); + if (ret) + return ret; + + prev = &vdev->vconfig[pos + PCI_CAP_LIST_NEXT]; + pos = next; + caps++; + } + + /* If we didn't fill any capabilities, clear the status flag */ + if (!caps) { + __le16 *vstatus = (__le16 *)&vdev->vconfig[PCI_STATUS]; + *vstatus &= ~cpu_to_le16(PCI_STATUS_CAP_LIST); + } + + return 0; +} + +static int vfio_ecap_init(struct vfio_pci_device *vdev) +{ + struct pci_dev *pdev = vdev->pdev; + u8 *map = vdev->pci_config_map; + u16 epos; + __le32 *prev = NULL; + int loops, ret, ecaps = 0; + + if (!vdev->extended_caps) + return 0; + + epos = PCI_CFG_SPACE_SIZE; + + loops = (pdev->cfg_size - PCI_CFG_SPACE_SIZE) / PCI_CAP_SIZEOF; + + while (loops-- && epos >= PCI_CFG_SPACE_SIZE) { + u32 header; + u16 ecap; + int i, len = 0; + bool hidden = false; + + ret = pci_read_config_dword(pdev, epos, &header); + if (ret) + return ret; + + ecap = PCI_EXT_CAP_ID(header); + + if (ecap <= PCI_EXT_CAP_ID_MAX) { + len = pci_ext_cap_length[ecap]; + if (len == 0xFF) { + len = vfio_ext_cap_len(vdev, ecap, epos); + if (len < 0) + return ret; + } + } + + if (!len) { + pr_info("%s: %s hiding ecap 0x%x@0x%x\n", + __func__, dev_name(&pdev->dev), ecap, epos); + + /* If not the first in the chain, we can skip over it */ + if (prev) { + u32 val = epos = PCI_EXT_CAP_NEXT(header); + *prev &= cpu_to_le32(~(0xffcU << 20)); + *prev |= cpu_to_le32(val << 20); + continue; + } + + /* + * Otherwise, fill in a placeholder, the direct + * readfn will virtualize this automatically + */ + len = PCI_CAP_SIZEOF; + hidden = true; + } + + for (i = 0; i < len; i += 4) { + if (likely(map[(epos + i) / 4] == PCI_CAP_ID_INVALID)) + continue; + + pr_warn("%s: %s pci config conflict @0x%x, was ecap 0x%x now ecap 0x%x\n", + __func__, dev_name(&pdev->dev), + epos + i, map[epos + i], ecap); + } + + /* + * Even though ecap is 2 bytes, we're currently a long way + * from exceeding 1 byte capabilities. If we ever make it + * up to 0xFF we'll need to up this to a two-byte, byte map. + */ + BUILD_BUG_ON(PCI_EXT_CAP_ID_MAX >= PCI_CAP_ID_INVALID); + + memset(map + (epos / 4), ecap, len / 4); + ret = vfio_fill_vconfig_bytes(vdev, epos, len); + if (ret) + return ret; + + /* + * If we're just using this capability to anchor the list, + * hide the real ID. Only count real ecaps. XXX PCI spec + * indicates to use cap id = 0, version = 0, next = 0 if + * ecaps are absent, hope users check all the way to next. + */ + if (hidden) + *(__le32 *)&vdev->vconfig[epos] &= + cpu_to_le32((0xffcU << 20)); + else + ecaps++; + + prev = (__le32 *)&vdev->vconfig[epos]; + epos = PCI_EXT_CAP_NEXT(header); + } + + if (!ecaps) + *(u32 *)&vdev->vconfig[PCI_CFG_SPACE_SIZE] = 0; + + return 0; +} + +/* + * For each device we allocate a pci_config_map that indicates the + * capability occupying each dword and thus the struct perm_bits we + * use for read and write. We also allocate a virtualized config + * space which tracks reads and writes to bits that we emulate for + * the user. Initial values filled from device. + * + * Using shared stuct perm_bits between all vfio-pci devices saves + * us from allocating cfg_size buffers for virt and write for every + * device. We could remove vconfig and allocate individual buffers + * for each area requring emulated bits, but the array of pointers + * would be comparable in size (at least for standard config space). + */ +int vfio_config_init(struct vfio_pci_device *vdev) +{ + struct pci_dev *pdev = vdev->pdev; + u8 *map, *vconfig; + int ret; + + /* + * Config space, caps and ecaps are all dword aligned, so we can + * use one byte per dword to record the type. + */ + map = kmalloc(pdev->cfg_size / 4, GFP_KERNEL); + if (!map) + return -ENOMEM; + + vconfig = kmalloc(pdev->cfg_size, GFP_KERNEL); + if (!vconfig) { + kfree(map); + return -ENOMEM; + } + + vdev->pci_config_map = map; + vdev->vconfig = vconfig; + + memset(map, PCI_CAP_ID_BASIC, PCI_STD_HEADER_SIZEOF / 4); + memset(map + (PCI_STD_HEADER_SIZEOF / 4), PCI_CAP_ID_INVALID, + (pdev->cfg_size - PCI_STD_HEADER_SIZEOF) / 4); + + ret = vfio_fill_vconfig_bytes(vdev, 0, PCI_STD_HEADER_SIZEOF); + if (ret) + goto out; + + vdev->bardirty = true; + + /* + * XXX can we just pci_load_saved_state/pci_restore_state? + * may need to rebuild vconfig after that + */ + + /* For restore after reset */ + vdev->rbar[0] = le32_to_cpu(*(__le32 *)&vconfig[PCI_BASE_ADDRESS_0]); + vdev->rbar[1] = le32_to_cpu(*(__le32 *)&vconfig[PCI_BASE_ADDRESS_1]); + vdev->rbar[2] = le32_to_cpu(*(__le32 *)&vconfig[PCI_BASE_ADDRESS_2]); + vdev->rbar[3] = le32_to_cpu(*(__le32 *)&vconfig[PCI_BASE_ADDRESS_3]); + vdev->rbar[4] = le32_to_cpu(*(__le32 *)&vconfig[PCI_BASE_ADDRESS_4]); + vdev->rbar[5] = le32_to_cpu(*(__le32 *)&vconfig[PCI_BASE_ADDRESS_5]); + vdev->rbar[6] = le32_to_cpu(*(__le32 *)&vconfig[PCI_ROM_ADDRESS]); + + if (pdev->is_virtfn) { + *(__le16 *)&vconfig[PCI_VENDOR_ID] = cpu_to_le16(pdev->vendor); + *(__le16 *)&vconfig[PCI_DEVICE_ID] = cpu_to_le16(pdev->device); + } + + ret = vfio_cap_init(vdev); + if (ret) + goto out; + + ret = vfio_ecap_init(vdev); + if (ret) + goto out; + + return 0; + +out: + kfree(map); + vdev->pci_config_map = NULL; + kfree(vconfig); + vdev->vconfig = NULL; + return pcibios_err_to_errno(ret); +} + +void vfio_config_free(struct vfio_pci_device *vdev) +{ + kfree(vdev->vconfig); + vdev->vconfig = NULL; + kfree(vdev->pci_config_map); + vdev->pci_config_map = NULL; + kfree(vdev->msi_perm); + vdev->msi_perm = NULL; +} + +static ssize_t vfio_config_do_rw(struct vfio_pci_device *vdev, char __user *buf, + size_t count, loff_t *ppos, bool iswrite) +{ + struct pci_dev *pdev = vdev->pdev; + struct perm_bits *perm; + __le32 val = 0; + int cap_start = 0, offset; + u8 cap_id; + ssize_t ret = count; + + if (*ppos < 0 || *ppos + count > pdev->cfg_size) + return -EFAULT; + + /* + * gcc can't seem to figure out we're a static function, only called + * with count of 1/2/4 and hits copy_from_user_overflow without this. + */ + if (count > sizeof(val)) + return -EINVAL; + + cap_id = vdev->pci_config_map[*ppos / 4]; + + if (cap_id == PCI_CAP_ID_INVALID) { + if (iswrite) + return ret; /* drop */ + + /* + * Per PCI spec 3.0, section 6.1, reads from reserved and + * unimplemented registers return 0 + */ + if (copy_to_user(buf, &val, count)) + return -EFAULT; + + return ret; + } + + /* + * All capabilities are minimum 4 bytes and aligned on dword + * boundaries. Since we don't support unaligned accesses, we're + * only ever accessing a single capability. + */ + if (*ppos >= PCI_CFG_SPACE_SIZE) { + WARN_ON(cap_id > PCI_EXT_CAP_ID_MAX); + + perm = &ecap_perms[cap_id]; + cap_start = vfio_find_cap_start(vdev, *ppos); + + } else { + WARN_ON(cap_id > PCI_CAP_ID_MAX); + + perm = &cap_perms[cap_id]; + + if (cap_id == PCI_CAP_ID_MSI) + perm = vdev->msi_perm; + + if (cap_id > PCI_CAP_ID_BASIC) + cap_start = vfio_find_cap_start(vdev, *ppos); + } + + WARN_ON(!cap_start && cap_id != PCI_CAP_ID_BASIC); + WARN_ON(cap_start > *ppos); + + offset = *ppos - cap_start; + + if (iswrite) { + if (!perm->writefn) + return ret; + + if (copy_from_user(&val, buf, count)) + return -EFAULT; + + ret = perm->writefn(vdev, *ppos, count, perm, offset, val); + } else { + if (perm->readfn) { + ret = perm->readfn(vdev, *ppos, count, + perm, offset, &val); + if (ret < 0) + return ret; + } + + if (copy_to_user(buf, &val, count)) + return -EFAULT; + } + + return ret; +} + +ssize_t vfio_pci_config_readwrite(struct vfio_pci_device *vdev, + char __user *buf, size_t count, + loff_t *ppos, bool iswrite) +{ + size_t done = 0; + int ret = 0; + loff_t pos = *ppos; + + pos &= VFIO_PCI_OFFSET_MASK; + + /* + * We want to both keep the access size the caller users as well as + * support reading large chunks of config space in a single call. + * PCI doesn't support unaligned accesses, so we can safely break + * those apart. + */ + while (count) { + if (count >= 4 && !(pos % 4)) + ret = vfio_config_do_rw(vdev, buf, 4, &pos, iswrite); + else if (count >= 2 && !(pos % 2)) + ret = vfio_config_do_rw(vdev, buf, 2, &pos, iswrite); + else + ret = vfio_config_do_rw(vdev, buf, 1, &pos, iswrite); + + if (ret < 0) + return ret; + + count -= ret; + done += ret; + buf += ret; + pos += ret; + } + + *ppos += done; + + return done; +} diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c new file mode 100644 index 0000000000000000000000000000000000000000..d8dedc7d3910c7bdc362dac6e099326642f0f1fb --- /dev/null +++ b/drivers/vfio/pci/vfio_pci_intrs.c @@ -0,0 +1,776 @@ +/* + * VFIO PCI interrupt handling + * + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from original vfio: + * Copyright 2010 Cisco Systems, Inc. All rights reserved. + * Author: Tom Lyon, pugs@cisco.com + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "vfio_pci_private.h" + +/* + * IRQfd - generic + */ +struct virqfd { + struct vfio_pci_device *vdev; + struct eventfd_ctx *eventfd; + int (*handler)(struct vfio_pci_device *, void *); + void (*thread)(struct vfio_pci_device *, void *); + void *data; + struct work_struct inject; + wait_queue_t wait; + poll_table pt; + struct work_struct shutdown; + struct virqfd **pvirqfd; +}; + +static struct workqueue_struct *vfio_irqfd_cleanup_wq; + +int __init vfio_pci_virqfd_init(void) +{ + vfio_irqfd_cleanup_wq = + create_singlethread_workqueue("vfio-irqfd-cleanup"); + if (!vfio_irqfd_cleanup_wq) + return -ENOMEM; + + return 0; +} + +void vfio_pci_virqfd_exit(void) +{ + destroy_workqueue(vfio_irqfd_cleanup_wq); +} + +static void virqfd_deactivate(struct virqfd *virqfd) +{ + queue_work(vfio_irqfd_cleanup_wq, &virqfd->shutdown); +} + +static int virqfd_wakeup(wait_queue_t *wait, unsigned mode, int sync, void *key) +{ + struct virqfd *virqfd = container_of(wait, struct virqfd, wait); + unsigned long flags = (unsigned long)key; + + if (flags & POLLIN) { + /* An event has been signaled, call function */ + if ((!virqfd->handler || + virqfd->handler(virqfd->vdev, virqfd->data)) && + virqfd->thread) + schedule_work(&virqfd->inject); + } + + if (flags & POLLHUP) { + unsigned long flags; + spin_lock_irqsave(&virqfd->vdev->irqlock, flags); + + /* + * The eventfd is closing, if the virqfd has not yet been + * queued for release, as determined by testing whether the + * vdev pointer to it is still valid, queue it now. As + * with kvm irqfds, we know we won't race against the virqfd + * going away because we hold wqh->lock to get here. + */ + if (*(virqfd->pvirqfd) == virqfd) { + *(virqfd->pvirqfd) = NULL; + virqfd_deactivate(virqfd); + } + + spin_unlock_irqrestore(&virqfd->vdev->irqlock, flags); + } + + return 0; +} + +static void virqfd_ptable_queue_proc(struct file *file, + wait_queue_head_t *wqh, poll_table *pt) +{ + struct virqfd *virqfd = container_of(pt, struct virqfd, pt); + add_wait_queue(wqh, &virqfd->wait); +} + +static void virqfd_shutdown(struct work_struct *work) +{ + struct virqfd *virqfd = container_of(work, struct virqfd, shutdown); + u64 cnt; + + eventfd_ctx_remove_wait_queue(virqfd->eventfd, &virqfd->wait, &cnt); + flush_work(&virqfd->inject); + eventfd_ctx_put(virqfd->eventfd); + + kfree(virqfd); +} + +static void virqfd_inject(struct work_struct *work) +{ + struct virqfd *virqfd = container_of(work, struct virqfd, inject); + if (virqfd->thread) + virqfd->thread(virqfd->vdev, virqfd->data); +} + +static int virqfd_enable(struct vfio_pci_device *vdev, + int (*handler)(struct vfio_pci_device *, void *), + void (*thread)(struct vfio_pci_device *, void *), + void *data, struct virqfd **pvirqfd, int fd) +{ + struct file *file = NULL; + struct eventfd_ctx *ctx = NULL; + struct virqfd *virqfd; + int ret = 0; + unsigned int events; + + virqfd = kzalloc(sizeof(*virqfd), GFP_KERNEL); + if (!virqfd) + return -ENOMEM; + + virqfd->pvirqfd = pvirqfd; + virqfd->vdev = vdev; + virqfd->handler = handler; + virqfd->thread = thread; + virqfd->data = data; + + INIT_WORK(&virqfd->shutdown, virqfd_shutdown); + INIT_WORK(&virqfd->inject, virqfd_inject); + + file = eventfd_fget(fd); + if (IS_ERR(file)) { + ret = PTR_ERR(file); + goto fail; + } + + ctx = eventfd_ctx_fileget(file); + if (IS_ERR(ctx)) { + ret = PTR_ERR(ctx); + goto fail; + } + + virqfd->eventfd = ctx; + + /* + * virqfds can be released by closing the eventfd or directly + * through ioctl. These are both done through a workqueue, so + * we update the pointer to the virqfd under lock to avoid + * pushing multiple jobs to release the same virqfd. + */ + spin_lock_irq(&vdev->irqlock); + + if (*pvirqfd) { + spin_unlock_irq(&vdev->irqlock); + ret = -EBUSY; + goto fail; + } + *pvirqfd = virqfd; + + spin_unlock_irq(&vdev->irqlock); + + /* + * Install our own custom wake-up handling so we are notified via + * a callback whenever someone signals the underlying eventfd. + */ + init_waitqueue_func_entry(&virqfd->wait, virqfd_wakeup); + init_poll_funcptr(&virqfd->pt, virqfd_ptable_queue_proc); + + events = file->f_op->poll(file, &virqfd->pt); + + /* + * Check if there was an event already pending on the eventfd + * before we registered and trigger it as if we didn't miss it. + */ + if (events & POLLIN) { + if ((!handler || handler(vdev, data)) && thread) + schedule_work(&virqfd->inject); + } + + /* + * Do not drop the file until the irqfd is fully initialized, + * otherwise we might race against the POLLHUP. + */ + fput(file); + + return 0; + +fail: + if (ctx && !IS_ERR(ctx)) + eventfd_ctx_put(ctx); + + if (file && !IS_ERR(file)) + fput(file); + + kfree(virqfd); + + return ret; +} + +static void virqfd_disable(struct vfio_pci_device *vdev, + struct virqfd **pvirqfd) +{ + unsigned long flags; + + spin_lock_irqsave(&vdev->irqlock, flags); + + if (*pvirqfd) { + virqfd_deactivate(*pvirqfd); + *pvirqfd = NULL; + } + + spin_unlock_irqrestore(&vdev->irqlock, flags); + + /* + * Block until we know all outstanding shutdown jobs have completed. + * Even if we don't queue the job, flush the wq to be sure it's + * been released. + */ + flush_workqueue(vfio_irqfd_cleanup_wq); +} + +/* + * INTx + */ +static void vfio_send_intx_eventfd(struct vfio_pci_device *vdev, void *unused) +{ + if (likely(is_intx(vdev) && !vdev->virq_disabled)) + eventfd_signal(vdev->ctx[0].trigger, 1); +} + +void vfio_pci_intx_mask(struct vfio_pci_device *vdev) +{ + struct pci_dev *pdev = vdev->pdev; + unsigned long flags; + + spin_lock_irqsave(&vdev->irqlock, flags); + + /* + * Masking can come from interrupt, ioctl, or config space + * via INTx disable. The latter means this can get called + * even when not using intx delivery. In this case, just + * try to have the physical bit follow the virtual bit. + */ + if (unlikely(!is_intx(vdev))) { + if (vdev->pci_2_3) + pci_intx(pdev, 0); + } else if (!vdev->ctx[0].masked) { + /* + * Can't use check_and_mask here because we always want to + * mask, not just when something is pending. + */ + if (vdev->pci_2_3) + pci_intx(pdev, 0); + else + disable_irq_nosync(pdev->irq); + + vdev->ctx[0].masked = true; + } + + spin_unlock_irqrestore(&vdev->irqlock, flags); +} + +/* + * If this is triggered by an eventfd, we can't call eventfd_signal + * or else we'll deadlock on the eventfd wait queue. Return >0 when + * a signal is necessary, which can then be handled via a work queue + * or directly depending on the caller. + */ +int vfio_pci_intx_unmask_handler(struct vfio_pci_device *vdev, void *unused) +{ + struct pci_dev *pdev = vdev->pdev; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&vdev->irqlock, flags); + + /* + * Unmasking comes from ioctl or config, so again, have the + * physical bit follow the virtual even when not using INTx. + */ + if (unlikely(!is_intx(vdev))) { + if (vdev->pci_2_3) + pci_intx(pdev, 1); + } else if (vdev->ctx[0].masked && !vdev->virq_disabled) { + /* + * A pending interrupt here would immediately trigger, + * but we can avoid that overhead by just re-sending + * the interrupt to the user. + */ + if (vdev->pci_2_3) { + if (!pci_check_and_unmask_intx(pdev)) + ret = 1; + } else + enable_irq(pdev->irq); + + vdev->ctx[0].masked = (ret > 0); + } + + spin_unlock_irqrestore(&vdev->irqlock, flags); + + return ret; +} + +void vfio_pci_intx_unmask(struct vfio_pci_device *vdev) +{ + if (vfio_pci_intx_unmask_handler(vdev, NULL) > 0) + vfio_send_intx_eventfd(vdev, NULL); +} + +static irqreturn_t vfio_intx_handler(int irq, void *dev_id) +{ + struct vfio_pci_device *vdev = dev_id; + unsigned long flags; + int ret = IRQ_NONE; + + spin_lock_irqsave(&vdev->irqlock, flags); + + if (!vdev->pci_2_3) { + disable_irq_nosync(vdev->pdev->irq); + vdev->ctx[0].masked = true; + ret = IRQ_HANDLED; + } else if (!vdev->ctx[0].masked && /* may be shared */ + pci_check_and_mask_intx(vdev->pdev)) { + vdev->ctx[0].masked = true; + ret = IRQ_HANDLED; + } + + spin_unlock_irqrestore(&vdev->irqlock, flags); + + if (ret == IRQ_HANDLED) + vfio_send_intx_eventfd(vdev, NULL); + + return ret; +} + +static int vfio_intx_enable(struct vfio_pci_device *vdev) +{ + if (!is_irq_none(vdev)) + return -EINVAL; + + if (!vdev->pdev->irq) + return -ENODEV; + + vdev->ctx = kzalloc(sizeof(struct vfio_pci_irq_ctx), GFP_KERNEL); + if (!vdev->ctx) + return -ENOMEM; + + vdev->num_ctx = 1; + vdev->irq_type = VFIO_PCI_INTX_IRQ_INDEX; + + return 0; +} + +static int vfio_intx_set_signal(struct vfio_pci_device *vdev, int fd) +{ + struct pci_dev *pdev = vdev->pdev; + unsigned long irqflags = IRQF_SHARED; + struct eventfd_ctx *trigger; + unsigned long flags; + int ret; + + if (vdev->ctx[0].trigger) { + free_irq(pdev->irq, vdev); + kfree(vdev->ctx[0].name); + eventfd_ctx_put(vdev->ctx[0].trigger); + vdev->ctx[0].trigger = NULL; + } + + if (fd < 0) /* Disable only */ + return 0; + + vdev->ctx[0].name = kasprintf(GFP_KERNEL, "vfio-intx(%s)", + pci_name(pdev)); + if (!vdev->ctx[0].name) + return -ENOMEM; + + trigger = eventfd_ctx_fdget(fd); + if (IS_ERR(trigger)) { + kfree(vdev->ctx[0].name); + return PTR_ERR(trigger); + } + + if (!vdev->pci_2_3) + irqflags = 0; + + ret = request_irq(pdev->irq, vfio_intx_handler, + irqflags, vdev->ctx[0].name, vdev); + if (ret) { + kfree(vdev->ctx[0].name); + eventfd_ctx_put(trigger); + return ret; + } + + vdev->ctx[0].trigger = trigger; + + /* + * INTx disable will stick across the new irq setup, + * disable_irq won't. + */ + spin_lock_irqsave(&vdev->irqlock, flags); + if (!vdev->pci_2_3 && (vdev->ctx[0].masked || vdev->virq_disabled)) + disable_irq_nosync(pdev->irq); + spin_unlock_irqrestore(&vdev->irqlock, flags); + + return 0; +} + +static void vfio_intx_disable(struct vfio_pci_device *vdev) +{ + vfio_intx_set_signal(vdev, -1); + virqfd_disable(vdev, &vdev->ctx[0].unmask); + virqfd_disable(vdev, &vdev->ctx[0].mask); + vdev->irq_type = VFIO_PCI_NUM_IRQS; + vdev->num_ctx = 0; + kfree(vdev->ctx); +} + +/* + * MSI/MSI-X + */ +static irqreturn_t vfio_msihandler(int irq, void *arg) +{ + struct eventfd_ctx *trigger = arg; + + eventfd_signal(trigger, 1); + return IRQ_HANDLED; +} + +static int vfio_msi_enable(struct vfio_pci_device *vdev, int nvec, bool msix) +{ + struct pci_dev *pdev = vdev->pdev; + int ret; + + if (!is_irq_none(vdev)) + return -EINVAL; + + vdev->ctx = kzalloc(nvec * sizeof(struct vfio_pci_irq_ctx), GFP_KERNEL); + if (!vdev->ctx) + return -ENOMEM; + + if (msix) { + int i; + + vdev->msix = kzalloc(nvec * sizeof(struct msix_entry), + GFP_KERNEL); + if (!vdev->msix) { + kfree(vdev->ctx); + return -ENOMEM; + } + + for (i = 0; i < nvec; i++) + vdev->msix[i].entry = i; + + ret = pci_enable_msix(pdev, vdev->msix, nvec); + if (ret) { + kfree(vdev->msix); + kfree(vdev->ctx); + return ret; + } + } else { + ret = pci_enable_msi_block(pdev, nvec); + if (ret) { + kfree(vdev->ctx); + return ret; + } + } + + vdev->num_ctx = nvec; + vdev->irq_type = msix ? VFIO_PCI_MSIX_IRQ_INDEX : + VFIO_PCI_MSI_IRQ_INDEX; + + if (!msix) { + /* + * Compute the virtual hardware field for max msi vectors - + * it is the log base 2 of the number of vectors. + */ + vdev->msi_qmax = fls(nvec * 2 - 1) - 1; + } + + return 0; +} + +static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev, + int vector, int fd, bool msix) +{ + struct pci_dev *pdev = vdev->pdev; + int irq = msix ? vdev->msix[vector].vector : pdev->irq + vector; + char *name = msix ? "vfio-msix" : "vfio-msi"; + struct eventfd_ctx *trigger; + int ret; + + if (vector >= vdev->num_ctx) + return -EINVAL; + + if (vdev->ctx[vector].trigger) { + free_irq(irq, vdev->ctx[vector].trigger); + kfree(vdev->ctx[vector].name); + eventfd_ctx_put(vdev->ctx[vector].trigger); + vdev->ctx[vector].trigger = NULL; + } + + if (fd < 0) + return 0; + + vdev->ctx[vector].name = kasprintf(GFP_KERNEL, "%s[%d](%s)", + name, vector, pci_name(pdev)); + if (!vdev->ctx[vector].name) + return -ENOMEM; + + trigger = eventfd_ctx_fdget(fd); + if (IS_ERR(trigger)) { + kfree(vdev->ctx[vector].name); + return PTR_ERR(trigger); + } + + ret = request_irq(irq, vfio_msihandler, 0, + vdev->ctx[vector].name, trigger); + if (ret) { + kfree(vdev->ctx[vector].name); + eventfd_ctx_put(trigger); + return ret; + } + + vdev->ctx[vector].trigger = trigger; + + return 0; +} + +static int vfio_msi_set_block(struct vfio_pci_device *vdev, unsigned start, + unsigned count, int32_t *fds, bool msix) +{ + int i, j, ret = 0; + + if (start + count > vdev->num_ctx) + return -EINVAL; + + for (i = 0, j = start; i < count && !ret; i++, j++) { + int fd = fds ? fds[i] : -1; + ret = vfio_msi_set_vector_signal(vdev, j, fd, msix); + } + + if (ret) { + for (--j; j >= start; j--) + vfio_msi_set_vector_signal(vdev, j, -1, msix); + } + + return ret; +} + +static void vfio_msi_disable(struct vfio_pci_device *vdev, bool msix) +{ + struct pci_dev *pdev = vdev->pdev; + int i; + + vfio_msi_set_block(vdev, 0, vdev->num_ctx, NULL, msix); + + for (i = 0; i < vdev->num_ctx; i++) { + virqfd_disable(vdev, &vdev->ctx[i].unmask); + virqfd_disable(vdev, &vdev->ctx[i].mask); + } + + if (msix) { + pci_disable_msix(vdev->pdev); + kfree(vdev->msix); + } else + pci_disable_msi(pdev); + + vdev->irq_type = VFIO_PCI_NUM_IRQS; + vdev->num_ctx = 0; + kfree(vdev->ctx); +} + +/* + * IOCTL support + */ +static int vfio_pci_set_intx_unmask(struct vfio_pci_device *vdev, + unsigned index, unsigned start, + unsigned count, uint32_t flags, void *data) +{ + if (!is_intx(vdev) || start != 0 || count != 1) + return -EINVAL; + + if (flags & VFIO_IRQ_SET_DATA_NONE) { + vfio_pci_intx_unmask(vdev); + } else if (flags & VFIO_IRQ_SET_DATA_BOOL) { + uint8_t unmask = *(uint8_t *)data; + if (unmask) + vfio_pci_intx_unmask(vdev); + } else if (flags & VFIO_IRQ_SET_DATA_EVENTFD) { + int32_t fd = *(int32_t *)data; + if (fd >= 0) + return virqfd_enable(vdev, vfio_pci_intx_unmask_handler, + vfio_send_intx_eventfd, NULL, + &vdev->ctx[0].unmask, fd); + + virqfd_disable(vdev, &vdev->ctx[0].unmask); + } + + return 0; +} + +static int vfio_pci_set_intx_mask(struct vfio_pci_device *vdev, + unsigned index, unsigned start, + unsigned count, uint32_t flags, void *data) +{ + if (!is_intx(vdev) || start != 0 || count != 1) + return -EINVAL; + + if (flags & VFIO_IRQ_SET_DATA_NONE) { + vfio_pci_intx_mask(vdev); + } else if (flags & VFIO_IRQ_SET_DATA_BOOL) { + uint8_t mask = *(uint8_t *)data; + if (mask) + vfio_pci_intx_mask(vdev); + } else if (flags & VFIO_IRQ_SET_DATA_EVENTFD) { + return -ENOTTY; /* XXX implement me */ + } + + return 0; +} + +static int vfio_pci_set_intx_trigger(struct vfio_pci_device *vdev, + unsigned index, unsigned start, + unsigned count, uint32_t flags, void *data) +{ + if (is_intx(vdev) && !count && (flags & VFIO_IRQ_SET_DATA_NONE)) { + vfio_intx_disable(vdev); + return 0; + } + + if (!(is_intx(vdev) || is_irq_none(vdev)) || start != 0 || count != 1) + return -EINVAL; + + if (flags & VFIO_IRQ_SET_DATA_EVENTFD) { + int32_t fd = *(int32_t *)data; + int ret; + + if (is_intx(vdev)) + return vfio_intx_set_signal(vdev, fd); + + ret = vfio_intx_enable(vdev); + if (ret) + return ret; + + ret = vfio_intx_set_signal(vdev, fd); + if (ret) + vfio_intx_disable(vdev); + + return ret; + } + + if (!is_intx(vdev)) + return -EINVAL; + + if (flags & VFIO_IRQ_SET_DATA_NONE) { + vfio_send_intx_eventfd(vdev, NULL); + } else if (flags & VFIO_IRQ_SET_DATA_BOOL) { + uint8_t trigger = *(uint8_t *)data; + if (trigger) + vfio_send_intx_eventfd(vdev, NULL); + } + return 0; +} + +static int vfio_pci_set_msi_trigger(struct vfio_pci_device *vdev, + unsigned index, unsigned start, + unsigned count, uint32_t flags, void *data) +{ + int i; + bool msix = (index == VFIO_PCI_MSIX_IRQ_INDEX) ? true : false; + + if (irq_is(vdev, index) && !count && (flags & VFIO_IRQ_SET_DATA_NONE)) { + vfio_msi_disable(vdev, msix); + return 0; + } + + if (!(irq_is(vdev, index) || is_irq_none(vdev))) + return -EINVAL; + + if (flags & VFIO_IRQ_SET_DATA_EVENTFD) { + int32_t *fds = data; + int ret; + + if (vdev->irq_type == index) + return vfio_msi_set_block(vdev, start, count, + fds, msix); + + ret = vfio_msi_enable(vdev, start + count, msix); + if (ret) + return ret; + + ret = vfio_msi_set_block(vdev, start, count, fds, msix); + if (ret) + vfio_msi_disable(vdev, msix); + + return ret; + } + + if (!irq_is(vdev, index) || start + count > vdev->num_ctx) + return -EINVAL; + + for (i = start; i < start + count; i++) { + if (!vdev->ctx[i].trigger) + continue; + if (flags & VFIO_IRQ_SET_DATA_NONE) { + eventfd_signal(vdev->ctx[i].trigger, 1); + } else if (flags & VFIO_IRQ_SET_DATA_BOOL) { + uint8_t *bools = data; + if (bools[i - start]) + eventfd_signal(vdev->ctx[i].trigger, 1); + } + } + return 0; +} + +int vfio_pci_set_irqs_ioctl(struct vfio_pci_device *vdev, uint32_t flags, + unsigned index, unsigned start, unsigned count, + void *data) +{ + int (*func)(struct vfio_pci_device *vdev, unsigned index, + unsigned start, unsigned count, uint32_t flags, + void *data) = NULL; + + switch (index) { + case VFIO_PCI_INTX_IRQ_INDEX: + switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) { + case VFIO_IRQ_SET_ACTION_MASK: + func = vfio_pci_set_intx_mask; + break; + case VFIO_IRQ_SET_ACTION_UNMASK: + func = vfio_pci_set_intx_unmask; + break; + case VFIO_IRQ_SET_ACTION_TRIGGER: + func = vfio_pci_set_intx_trigger; + break; + } + break; + case VFIO_PCI_MSI_IRQ_INDEX: + case VFIO_PCI_MSIX_IRQ_INDEX: + switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) { + case VFIO_IRQ_SET_ACTION_MASK: + case VFIO_IRQ_SET_ACTION_UNMASK: + /* XXX Need masking support exported */ + break; + case VFIO_IRQ_SET_ACTION_TRIGGER: + func = vfio_pci_set_msi_trigger; + break; + } + break; + } + + if (!func) + return -ENOTTY; + + return func(vdev, index, start, count, flags, data); +} diff --git a/drivers/vfio/pci/vfio_pci_private.h b/drivers/vfio/pci/vfio_pci_private.h new file mode 100644 index 0000000000000000000000000000000000000000..611827cba8cdc96ffbdfea5db445e309d5a119fa --- /dev/null +++ b/drivers/vfio/pci/vfio_pci_private.h @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from original vfio: + * Copyright 2010 Cisco Systems, Inc. All rights reserved. + * Author: Tom Lyon, pugs@cisco.com + */ + +#include +#include + +#ifndef VFIO_PCI_PRIVATE_H +#define VFIO_PCI_PRIVATE_H + +#define VFIO_PCI_OFFSET_SHIFT 40 + +#define VFIO_PCI_OFFSET_TO_INDEX(off) (off >> VFIO_PCI_OFFSET_SHIFT) +#define VFIO_PCI_INDEX_TO_OFFSET(index) ((u64)(index) << VFIO_PCI_OFFSET_SHIFT) +#define VFIO_PCI_OFFSET_MASK (((u64)(1) << VFIO_PCI_OFFSET_SHIFT) - 1) + +struct vfio_pci_irq_ctx { + struct eventfd_ctx *trigger; + struct virqfd *unmask; + struct virqfd *mask; + char *name; + bool masked; +}; + +struct vfio_pci_device { + struct pci_dev *pdev; + void __iomem *barmap[PCI_STD_RESOURCE_END + 1]; + u8 *pci_config_map; + u8 *vconfig; + struct perm_bits *msi_perm; + spinlock_t irqlock; + struct mutex igate; + struct msix_entry *msix; + struct vfio_pci_irq_ctx *ctx; + int num_ctx; + int irq_type; + u8 msi_qmax; + u8 msix_bar; + u16 msix_size; + u32 msix_offset; + u32 rbar[7]; + bool pci_2_3; + bool virq_disabled; + bool reset_works; + bool extended_caps; + bool bardirty; + struct pci_saved_state *pci_saved_state; + atomic_t refcnt; +}; + +#define is_intx(vdev) (vdev->irq_type == VFIO_PCI_INTX_IRQ_INDEX) +#define is_msi(vdev) (vdev->irq_type == VFIO_PCI_MSI_IRQ_INDEX) +#define is_msix(vdev) (vdev->irq_type == VFIO_PCI_MSIX_IRQ_INDEX) +#define is_irq_none(vdev) (!(is_intx(vdev) || is_msi(vdev) || is_msix(vdev))) +#define irq_is(vdev, type) (vdev->irq_type == type) + +extern void vfio_pci_intx_mask(struct vfio_pci_device *vdev); +extern void vfio_pci_intx_unmask(struct vfio_pci_device *vdev); + +extern int vfio_pci_set_irqs_ioctl(struct vfio_pci_device *vdev, + uint32_t flags, unsigned index, + unsigned start, unsigned count, void *data); + +extern ssize_t vfio_pci_config_readwrite(struct vfio_pci_device *vdev, + char __user *buf, size_t count, + loff_t *ppos, bool iswrite); +extern ssize_t vfio_pci_mem_readwrite(struct vfio_pci_device *vdev, + char __user *buf, size_t count, + loff_t *ppos, bool iswrite); +extern ssize_t vfio_pci_io_readwrite(struct vfio_pci_device *vdev, + char __user *buf, size_t count, + loff_t *ppos, bool iswrite); + +extern int vfio_pci_init_perm_bits(void); +extern void vfio_pci_uninit_perm_bits(void); + +extern int vfio_pci_virqfd_init(void); +extern void vfio_pci_virqfd_exit(void); + +extern int vfio_config_init(struct vfio_pci_device *vdev); +extern void vfio_config_free(struct vfio_pci_device *vdev); +#endif /* VFIO_PCI_PRIVATE_H */ diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c b/drivers/vfio/pci/vfio_pci_rdwr.c new file mode 100644 index 0000000000000000000000000000000000000000..4362d9e7baa355a971ed5935a486757b49699154 --- /dev/null +++ b/drivers/vfio/pci/vfio_pci_rdwr.c @@ -0,0 +1,269 @@ +/* + * VFIO PCI I/O Port & MMIO access + * + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from original vfio: + * Copyright 2010 Cisco Systems, Inc. All rights reserved. + * Author: Tom Lyon, pugs@cisco.com + */ + +#include +#include +#include +#include + +#include "vfio_pci_private.h" + +/* I/O Port BAR access */ +ssize_t vfio_pci_io_readwrite(struct vfio_pci_device *vdev, char __user *buf, + size_t count, loff_t *ppos, bool iswrite) +{ + struct pci_dev *pdev = vdev->pdev; + loff_t pos = *ppos & VFIO_PCI_OFFSET_MASK; + int bar = VFIO_PCI_OFFSET_TO_INDEX(*ppos); + void __iomem *io; + size_t done = 0; + + if (!pci_resource_start(pdev, bar)) + return -EINVAL; + + if (pos + count > pci_resource_len(pdev, bar)) + return -EINVAL; + + if (!vdev->barmap[bar]) { + int ret; + + ret = pci_request_selected_regions(pdev, 1 << bar, "vfio"); + if (ret) + return ret; + + vdev->barmap[bar] = pci_iomap(pdev, bar, 0); + + if (!vdev->barmap[bar]) { + pci_release_selected_regions(pdev, 1 << bar); + return -EINVAL; + } + } + + io = vdev->barmap[bar]; + + while (count) { + int filled; + + if (count >= 3 && !(pos % 4)) { + __le32 val; + + if (iswrite) { + if (copy_from_user(&val, buf, 4)) + return -EFAULT; + + iowrite32(le32_to_cpu(val), io + pos); + } else { + val = cpu_to_le32(ioread32(io + pos)); + + if (copy_to_user(buf, &val, 4)) + return -EFAULT; + } + + filled = 4; + + } else if ((pos % 2) == 0 && count >= 2) { + __le16 val; + + if (iswrite) { + if (copy_from_user(&val, buf, 2)) + return -EFAULT; + + iowrite16(le16_to_cpu(val), io + pos); + } else { + val = cpu_to_le16(ioread16(io + pos)); + + if (copy_to_user(buf, &val, 2)) + return -EFAULT; + } + + filled = 2; + } else { + u8 val; + + if (iswrite) { + if (copy_from_user(&val, buf, 1)) + return -EFAULT; + + iowrite8(val, io + pos); + } else { + val = ioread8(io + pos); + + if (copy_to_user(buf, &val, 1)) + return -EFAULT; + } + + filled = 1; + } + + count -= filled; + done += filled; + buf += filled; + pos += filled; + } + + *ppos += done; + + return done; +} + +/* + * MMIO BAR access + * We handle two excluded ranges here as well, if the user tries to read + * the ROM beyond what PCI tells us is available or the MSI-X table region, + * we return 0xFF and writes are dropped. + */ +ssize_t vfio_pci_mem_readwrite(struct vfio_pci_device *vdev, char __user *buf, + size_t count, loff_t *ppos, bool iswrite) +{ + struct pci_dev *pdev = vdev->pdev; + loff_t pos = *ppos & VFIO_PCI_OFFSET_MASK; + int bar = VFIO_PCI_OFFSET_TO_INDEX(*ppos); + void __iomem *io; + resource_size_t end; + size_t done = 0; + size_t x_start = 0, x_end = 0; /* excluded range */ + + if (!pci_resource_start(pdev, bar)) + return -EINVAL; + + end = pci_resource_len(pdev, bar); + + if (pos > end) + return -EINVAL; + + if (pos == end) + return 0; + + if (pos + count > end) + count = end - pos; + + if (bar == PCI_ROM_RESOURCE) { + io = pci_map_rom(pdev, &x_start); + x_end = end; + } else { + if (!vdev->barmap[bar]) { + int ret; + + ret = pci_request_selected_regions(pdev, 1 << bar, + "vfio"); + if (ret) + return ret; + + vdev->barmap[bar] = pci_iomap(pdev, bar, 0); + + if (!vdev->barmap[bar]) { + pci_release_selected_regions(pdev, 1 << bar); + return -EINVAL; + } + } + + io = vdev->barmap[bar]; + + if (bar == vdev->msix_bar) { + x_start = vdev->msix_offset; + x_end = vdev->msix_offset + vdev->msix_size; + } + } + + if (!io) + return -EINVAL; + + while (count) { + size_t fillable, filled; + + if (pos < x_start) + fillable = x_start - pos; + else if (pos >= x_end) + fillable = end - pos; + else + fillable = 0; + + if (fillable >= 4 && !(pos % 4) && (count >= 4)) { + __le32 val; + + if (iswrite) { + if (copy_from_user(&val, buf, 4)) + goto out; + + iowrite32(le32_to_cpu(val), io + pos); + } else { + val = cpu_to_le32(ioread32(io + pos)); + + if (copy_to_user(buf, &val, 4)) + goto out; + } + + filled = 4; + } else if (fillable >= 2 && !(pos % 2) && (count >= 2)) { + __le16 val; + + if (iswrite) { + if (copy_from_user(&val, buf, 2)) + goto out; + + iowrite16(le16_to_cpu(val), io + pos); + } else { + val = cpu_to_le16(ioread16(io + pos)); + + if (copy_to_user(buf, &val, 2)) + goto out; + } + + filled = 2; + } else if (fillable) { + u8 val; + + if (iswrite) { + if (copy_from_user(&val, buf, 1)) + goto out; + + iowrite8(val, io + pos); + } else { + val = ioread8(io + pos); + + if (copy_to_user(buf, &val, 1)) + goto out; + } + + filled = 1; + } else { + /* Drop writes, fill reads with FF */ + if (!iswrite) { + char val = 0xFF; + size_t i; + + for (i = 0; i < x_end - pos; i++) { + if (put_user(val, buf + i)) + goto out; + } + } + + filled = x_end - pos; + } + + count -= filled; + done += filled; + buf += filled; + pos += filled; + } + + *ppos += done; + +out: + if (bar == PCI_ROM_RESOURCE) + pci_unmap_rom(pdev, io); + + return count ? -EFAULT : done; +} diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c new file mode 100644 index 0000000000000000000000000000000000000000..17830c9c7cc623b7b26cdac7568aca508f7251e7 --- /dev/null +++ b/drivers/vfio/vfio.c @@ -0,0 +1,1415 @@ +/* + * VFIO core + * + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from original vfio: + * Copyright 2010 Cisco Systems, Inc. All rights reserved. + * Author: Tom Lyon, pugs@cisco.com + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_VERSION "0.3" +#define DRIVER_AUTHOR "Alex Williamson " +#define DRIVER_DESC "VFIO - User Level meta-driver" + +static struct vfio { + struct class *class; + struct list_head iommu_drivers_list; + struct mutex iommu_drivers_lock; + struct list_head group_list; + struct idr group_idr; + struct mutex group_lock; + struct cdev group_cdev; + struct device *dev; + dev_t devt; + struct cdev cdev; + wait_queue_head_t release_q; +} vfio; + +struct vfio_iommu_driver { + const struct vfio_iommu_driver_ops *ops; + struct list_head vfio_next; +}; + +struct vfio_container { + struct kref kref; + struct list_head group_list; + struct mutex group_lock; + struct vfio_iommu_driver *iommu_driver; + void *iommu_data; +}; + +struct vfio_group { + struct kref kref; + int minor; + atomic_t container_users; + struct iommu_group *iommu_group; + struct vfio_container *container; + struct list_head device_list; + struct mutex device_lock; + struct device *dev; + struct notifier_block nb; + struct list_head vfio_next; + struct list_head container_next; +}; + +struct vfio_device { + struct kref kref; + struct device *dev; + const struct vfio_device_ops *ops; + struct vfio_group *group; + struct list_head group_next; + void *device_data; +}; + +/** + * IOMMU driver registration + */ +int vfio_register_iommu_driver(const struct vfio_iommu_driver_ops *ops) +{ + struct vfio_iommu_driver *driver, *tmp; + + driver = kzalloc(sizeof(*driver), GFP_KERNEL); + if (!driver) + return -ENOMEM; + + driver->ops = ops; + + mutex_lock(&vfio.iommu_drivers_lock); + + /* Check for duplicates */ + list_for_each_entry(tmp, &vfio.iommu_drivers_list, vfio_next) { + if (tmp->ops == ops) { + mutex_unlock(&vfio.iommu_drivers_lock); + kfree(driver); + return -EINVAL; + } + } + + list_add(&driver->vfio_next, &vfio.iommu_drivers_list); + + mutex_unlock(&vfio.iommu_drivers_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(vfio_register_iommu_driver); + +void vfio_unregister_iommu_driver(const struct vfio_iommu_driver_ops *ops) +{ + struct vfio_iommu_driver *driver; + + mutex_lock(&vfio.iommu_drivers_lock); + list_for_each_entry(driver, &vfio.iommu_drivers_list, vfio_next) { + if (driver->ops == ops) { + list_del(&driver->vfio_next); + mutex_unlock(&vfio.iommu_drivers_lock); + kfree(driver); + return; + } + } + mutex_unlock(&vfio.iommu_drivers_lock); +} +EXPORT_SYMBOL_GPL(vfio_unregister_iommu_driver); + +/** + * Group minor allocation/free - both called with vfio.group_lock held + */ +static int vfio_alloc_group_minor(struct vfio_group *group) +{ + int ret, minor; + +again: + if (unlikely(idr_pre_get(&vfio.group_idr, GFP_KERNEL) == 0)) + return -ENOMEM; + + /* index 0 is used by /dev/vfio/vfio */ + ret = idr_get_new_above(&vfio.group_idr, group, 1, &minor); + if (ret == -EAGAIN) + goto again; + if (ret || minor > MINORMASK) { + if (minor > MINORMASK) + idr_remove(&vfio.group_idr, minor); + return -ENOSPC; + } + + return minor; +} + +static void vfio_free_group_minor(int minor) +{ + idr_remove(&vfio.group_idr, minor); +} + +static int vfio_iommu_group_notifier(struct notifier_block *nb, + unsigned long action, void *data); +static void vfio_group_get(struct vfio_group *group); + +/** + * Container objects - containers are created when /dev/vfio/vfio is + * opened, but their lifecycle extends until the last user is done, so + * it's freed via kref. Must support container/group/device being + * closed in any order. + */ +static void vfio_container_get(struct vfio_container *container) +{ + kref_get(&container->kref); +} + +static void vfio_container_release(struct kref *kref) +{ + struct vfio_container *container; + container = container_of(kref, struct vfio_container, kref); + + kfree(container); +} + +static void vfio_container_put(struct vfio_container *container) +{ + kref_put(&container->kref, vfio_container_release); +} + +/** + * Group objects - create, release, get, put, search + */ +static struct vfio_group *vfio_create_group(struct iommu_group *iommu_group) +{ + struct vfio_group *group, *tmp; + struct device *dev; + int ret, minor; + + group = kzalloc(sizeof(*group), GFP_KERNEL); + if (!group) + return ERR_PTR(-ENOMEM); + + kref_init(&group->kref); + INIT_LIST_HEAD(&group->device_list); + mutex_init(&group->device_lock); + atomic_set(&group->container_users, 0); + group->iommu_group = iommu_group; + + group->nb.notifier_call = vfio_iommu_group_notifier; + + /* + * blocking notifiers acquire a rwsem around registering and hold + * it around callback. Therefore, need to register outside of + * vfio.group_lock to avoid A-B/B-A contention. Our callback won't + * do anything unless it can find the group in vfio.group_list, so + * no harm in registering early. + */ + ret = iommu_group_register_notifier(iommu_group, &group->nb); + if (ret) { + kfree(group); + return ERR_PTR(ret); + } + + mutex_lock(&vfio.group_lock); + + minor = vfio_alloc_group_minor(group); + if (minor < 0) { + mutex_unlock(&vfio.group_lock); + kfree(group); + return ERR_PTR(minor); + } + + /* Did we race creating this group? */ + list_for_each_entry(tmp, &vfio.group_list, vfio_next) { + if (tmp->iommu_group == iommu_group) { + vfio_group_get(tmp); + vfio_free_group_minor(minor); + mutex_unlock(&vfio.group_lock); + kfree(group); + return tmp; + } + } + + dev = device_create(vfio.class, NULL, MKDEV(MAJOR(vfio.devt), minor), + group, "%d", iommu_group_id(iommu_group)); + if (IS_ERR(dev)) { + vfio_free_group_minor(minor); + mutex_unlock(&vfio.group_lock); + kfree(group); + return (struct vfio_group *)dev; /* ERR_PTR */ + } + + group->minor = minor; + group->dev = dev; + + list_add(&group->vfio_next, &vfio.group_list); + + mutex_unlock(&vfio.group_lock); + + return group; +} + +/* called with vfio.group_lock held */ +static void vfio_group_release(struct kref *kref) +{ + struct vfio_group *group = container_of(kref, struct vfio_group, kref); + + WARN_ON(!list_empty(&group->device_list)); + + device_destroy(vfio.class, MKDEV(MAJOR(vfio.devt), group->minor)); + list_del(&group->vfio_next); + vfio_free_group_minor(group->minor); + + mutex_unlock(&vfio.group_lock); + + /* + * Unregister outside of lock. A spurious callback is harmless now + * that the group is no longer in vfio.group_list. + */ + iommu_group_unregister_notifier(group->iommu_group, &group->nb); + + kfree(group); +} + +static void vfio_group_put(struct vfio_group *group) +{ + kref_put_mutex(&group->kref, vfio_group_release, &vfio.group_lock); +} + +/* Assume group_lock or group reference is held */ +static void vfio_group_get(struct vfio_group *group) +{ + kref_get(&group->kref); +} + +/* + * Not really a try as we will sleep for mutex, but we need to make + * sure the group pointer is valid under lock and get a reference. + */ +static struct vfio_group *vfio_group_try_get(struct vfio_group *group) +{ + struct vfio_group *target = group; + + mutex_lock(&vfio.group_lock); + list_for_each_entry(group, &vfio.group_list, vfio_next) { + if (group == target) { + vfio_group_get(group); + mutex_unlock(&vfio.group_lock); + return group; + } + } + mutex_unlock(&vfio.group_lock); + + return NULL; +} + +static +struct vfio_group *vfio_group_get_from_iommu(struct iommu_group *iommu_group) +{ + struct vfio_group *group; + + mutex_lock(&vfio.group_lock); + list_for_each_entry(group, &vfio.group_list, vfio_next) { + if (group->iommu_group == iommu_group) { + vfio_group_get(group); + mutex_unlock(&vfio.group_lock); + return group; + } + } + mutex_unlock(&vfio.group_lock); + + return NULL; +} + +static struct vfio_group *vfio_group_get_from_minor(int minor) +{ + struct vfio_group *group; + + mutex_lock(&vfio.group_lock); + group = idr_find(&vfio.group_idr, minor); + if (!group) { + mutex_unlock(&vfio.group_lock); + return NULL; + } + vfio_group_get(group); + mutex_unlock(&vfio.group_lock); + + return group; +} + +/** + * Device objects - create, release, get, put, search + */ +static +struct vfio_device *vfio_group_create_device(struct vfio_group *group, + struct device *dev, + const struct vfio_device_ops *ops, + void *device_data) +{ + struct vfio_device *device; + int ret; + + device = kzalloc(sizeof(*device), GFP_KERNEL); + if (!device) + return ERR_PTR(-ENOMEM); + + kref_init(&device->kref); + device->dev = dev; + device->group = group; + device->ops = ops; + device->device_data = device_data; + + ret = dev_set_drvdata(dev, device); + if (ret) { + kfree(device); + return ERR_PTR(ret); + } + + /* No need to get group_lock, caller has group reference */ + vfio_group_get(group); + + mutex_lock(&group->device_lock); + list_add(&device->group_next, &group->device_list); + mutex_unlock(&group->device_lock); + + return device; +} + +static void vfio_device_release(struct kref *kref) +{ + struct vfio_device *device = container_of(kref, + struct vfio_device, kref); + struct vfio_group *group = device->group; + + list_del(&device->group_next); + mutex_unlock(&group->device_lock); + + dev_set_drvdata(device->dev, NULL); + + kfree(device); + + /* vfio_del_group_dev may be waiting for this device */ + wake_up(&vfio.release_q); +} + +/* Device reference always implies a group reference */ +static void vfio_device_put(struct vfio_device *device) +{ + struct vfio_group *group = device->group; + kref_put_mutex(&device->kref, vfio_device_release, &group->device_lock); + vfio_group_put(group); +} + +static void vfio_device_get(struct vfio_device *device) +{ + vfio_group_get(device->group); + kref_get(&device->kref); +} + +static struct vfio_device *vfio_group_get_device(struct vfio_group *group, + struct device *dev) +{ + struct vfio_device *device; + + mutex_lock(&group->device_lock); + list_for_each_entry(device, &group->device_list, group_next) { + if (device->dev == dev) { + vfio_device_get(device); + mutex_unlock(&group->device_lock); + return device; + } + } + mutex_unlock(&group->device_lock); + return NULL; +} + +/* + * Whitelist some drivers that we know are safe (no dma) or just sit on + * a device. It's not always practical to leave a device within a group + * driverless as it could get re-bound to something unsafe. + */ +static const char * const vfio_driver_whitelist[] = { "pci-stub" }; + +static bool vfio_whitelisted_driver(struct device_driver *drv) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(vfio_driver_whitelist); i++) { + if (!strcmp(drv->name, vfio_driver_whitelist[i])) + return true; + } + + return false; +} + +/* + * A vfio group is viable for use by userspace if all devices are either + * driver-less or bound to a vfio or whitelisted driver. We test the + * latter by the existence of a struct vfio_device matching the dev. + */ +static int vfio_dev_viable(struct device *dev, void *data) +{ + struct vfio_group *group = data; + struct vfio_device *device; + + if (!dev->driver || vfio_whitelisted_driver(dev->driver)) + return 0; + + device = vfio_group_get_device(group, dev); + if (device) { + vfio_device_put(device); + return 0; + } + + return -EINVAL; +} + +/** + * Async device support + */ +static int vfio_group_nb_add_dev(struct vfio_group *group, struct device *dev) +{ + struct vfio_device *device; + + /* Do we already know about it? We shouldn't */ + device = vfio_group_get_device(group, dev); + if (WARN_ON_ONCE(device)) { + vfio_device_put(device); + return 0; + } + + /* Nothing to do for idle groups */ + if (!atomic_read(&group->container_users)) + return 0; + + /* TODO Prevent device auto probing */ + WARN("Device %s added to live group %d!\n", dev_name(dev), + iommu_group_id(group->iommu_group)); + + return 0; +} + +static int vfio_group_nb_del_dev(struct vfio_group *group, struct device *dev) +{ + struct vfio_device *device; + + /* + * Expect to fall out here. If a device was in use, it would + * have been bound to a vfio sub-driver, which would have blocked + * in .remove at vfio_del_group_dev. Sanity check that we no + * longer track the device, so it's safe to remove. + */ + device = vfio_group_get_device(group, dev); + if (likely(!device)) + return 0; + + WARN("Device %s removed from live group %d!\n", dev_name(dev), + iommu_group_id(group->iommu_group)); + + vfio_device_put(device); + return 0; +} + +static int vfio_group_nb_verify(struct vfio_group *group, struct device *dev) +{ + /* We don't care what happens when the group isn't in use */ + if (!atomic_read(&group->container_users)) + return 0; + + return vfio_dev_viable(dev, group); +} + +static int vfio_iommu_group_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct vfio_group *group = container_of(nb, struct vfio_group, nb); + struct device *dev = data; + + /* + * Need to go through a group_lock lookup to get a reference or + * we risk racing a group being removed. Leave a WARN_ON for + * debuging, but if the group no longer exists, a spurious notify + * is harmless. + */ + group = vfio_group_try_get(group); + if (WARN_ON(!group)) + return NOTIFY_OK; + + switch (action) { + case IOMMU_GROUP_NOTIFY_ADD_DEVICE: + vfio_group_nb_add_dev(group, dev); + break; + case IOMMU_GROUP_NOTIFY_DEL_DEVICE: + vfio_group_nb_del_dev(group, dev); + break; + case IOMMU_GROUP_NOTIFY_BIND_DRIVER: + pr_debug("%s: Device %s, group %d binding to driver\n", + __func__, dev_name(dev), + iommu_group_id(group->iommu_group)); + break; + case IOMMU_GROUP_NOTIFY_BOUND_DRIVER: + pr_debug("%s: Device %s, group %d bound to driver %s\n", + __func__, dev_name(dev), + iommu_group_id(group->iommu_group), dev->driver->name); + BUG_ON(vfio_group_nb_verify(group, dev)); + break; + case IOMMU_GROUP_NOTIFY_UNBIND_DRIVER: + pr_debug("%s: Device %s, group %d unbinding from driver %s\n", + __func__, dev_name(dev), + iommu_group_id(group->iommu_group), dev->driver->name); + break; + case IOMMU_GROUP_NOTIFY_UNBOUND_DRIVER: + pr_debug("%s: Device %s, group %d unbound from driver\n", + __func__, dev_name(dev), + iommu_group_id(group->iommu_group)); + /* + * XXX An unbound device in a live group is ok, but we'd + * really like to avoid the above BUG_ON by preventing other + * drivers from binding to it. Once that occurs, we have to + * stop the system to maintain isolation. At a minimum, we'd + * want a toggle to disable driver auto probe for this device. + */ + break; + } + + vfio_group_put(group); + return NOTIFY_OK; +} + +/** + * VFIO driver API + */ +int vfio_add_group_dev(struct device *dev, + const struct vfio_device_ops *ops, void *device_data) +{ + struct iommu_group *iommu_group; + struct vfio_group *group; + struct vfio_device *device; + + iommu_group = iommu_group_get(dev); + if (!iommu_group) + return -EINVAL; + + group = vfio_group_get_from_iommu(iommu_group); + if (!group) { + group = vfio_create_group(iommu_group); + if (IS_ERR(group)) { + iommu_group_put(iommu_group); + return PTR_ERR(group); + } + } + + device = vfio_group_get_device(group, dev); + if (device) { + WARN(1, "Device %s already exists on group %d\n", + dev_name(dev), iommu_group_id(iommu_group)); + vfio_device_put(device); + vfio_group_put(group); + iommu_group_put(iommu_group); + return -EBUSY; + } + + device = vfio_group_create_device(group, dev, ops, device_data); + if (IS_ERR(device)) { + vfio_group_put(group); + iommu_group_put(iommu_group); + return PTR_ERR(device); + } + + /* + * Added device holds reference to iommu_group and vfio_device + * (which in turn holds reference to vfio_group). Drop extra + * group reference used while acquiring device. + */ + vfio_group_put(group); + + return 0; +} +EXPORT_SYMBOL_GPL(vfio_add_group_dev); + +/* Test whether a struct device is present in our tracking */ +static bool vfio_dev_present(struct device *dev) +{ + struct iommu_group *iommu_group; + struct vfio_group *group; + struct vfio_device *device; + + iommu_group = iommu_group_get(dev); + if (!iommu_group) + return false; + + group = vfio_group_get_from_iommu(iommu_group); + if (!group) { + iommu_group_put(iommu_group); + return false; + } + + device = vfio_group_get_device(group, dev); + if (!device) { + vfio_group_put(group); + iommu_group_put(iommu_group); + return false; + } + + vfio_device_put(device); + vfio_group_put(group); + iommu_group_put(iommu_group); + return true; +} + +/* + * Decrement the device reference count and wait for the device to be + * removed. Open file descriptors for the device... */ +void *vfio_del_group_dev(struct device *dev) +{ + struct vfio_device *device = dev_get_drvdata(dev); + struct vfio_group *group = device->group; + struct iommu_group *iommu_group = group->iommu_group; + void *device_data = device->device_data; + + vfio_device_put(device); + + /* TODO send a signal to encourage this to be released */ + wait_event(vfio.release_q, !vfio_dev_present(dev)); + + iommu_group_put(iommu_group); + + return device_data; +} +EXPORT_SYMBOL_GPL(vfio_del_group_dev); + +/** + * VFIO base fd, /dev/vfio/vfio + */ +static long vfio_ioctl_check_extension(struct vfio_container *container, + unsigned long arg) +{ + struct vfio_iommu_driver *driver = container->iommu_driver; + long ret = 0; + + switch (arg) { + /* No base extensions yet */ + default: + /* + * If no driver is set, poll all registered drivers for + * extensions and return the first positive result. If + * a driver is already set, further queries will be passed + * only to that driver. + */ + if (!driver) { + mutex_lock(&vfio.iommu_drivers_lock); + list_for_each_entry(driver, &vfio.iommu_drivers_list, + vfio_next) { + if (!try_module_get(driver->ops->owner)) + continue; + + ret = driver->ops->ioctl(NULL, + VFIO_CHECK_EXTENSION, + arg); + module_put(driver->ops->owner); + if (ret > 0) + break; + } + mutex_unlock(&vfio.iommu_drivers_lock); + } else + ret = driver->ops->ioctl(container->iommu_data, + VFIO_CHECK_EXTENSION, arg); + } + + return ret; +} + +/* hold container->group_lock */ +static int __vfio_container_attach_groups(struct vfio_container *container, + struct vfio_iommu_driver *driver, + void *data) +{ + struct vfio_group *group; + int ret = -ENODEV; + + list_for_each_entry(group, &container->group_list, container_next) { + ret = driver->ops->attach_group(data, group->iommu_group); + if (ret) + goto unwind; + } + + return ret; + +unwind: + list_for_each_entry_continue_reverse(group, &container->group_list, + container_next) { + driver->ops->detach_group(data, group->iommu_group); + } + + return ret; +} + +static long vfio_ioctl_set_iommu(struct vfio_container *container, + unsigned long arg) +{ + struct vfio_iommu_driver *driver; + long ret = -ENODEV; + + mutex_lock(&container->group_lock); + + /* + * The container is designed to be an unprivileged interface while + * the group can be assigned to specific users. Therefore, only by + * adding a group to a container does the user get the privilege of + * enabling the iommu, which may allocate finite resources. There + * is no unset_iommu, but by removing all the groups from a container, + * the container is deprivileged and returns to an unset state. + */ + if (list_empty(&container->group_list) || container->iommu_driver) { + mutex_unlock(&container->group_lock); + return -EINVAL; + } + + mutex_lock(&vfio.iommu_drivers_lock); + list_for_each_entry(driver, &vfio.iommu_drivers_list, vfio_next) { + void *data; + + if (!try_module_get(driver->ops->owner)) + continue; + + /* + * The arg magic for SET_IOMMU is the same as CHECK_EXTENSION, + * so test which iommu driver reported support for this + * extension and call open on them. We also pass them the + * magic, allowing a single driver to support multiple + * interfaces if they'd like. + */ + if (driver->ops->ioctl(NULL, VFIO_CHECK_EXTENSION, arg) <= 0) { + module_put(driver->ops->owner); + continue; + } + + /* module reference holds the driver we're working on */ + mutex_unlock(&vfio.iommu_drivers_lock); + + data = driver->ops->open(arg); + if (IS_ERR(data)) { + ret = PTR_ERR(data); + module_put(driver->ops->owner); + goto skip_drivers_unlock; + } + + ret = __vfio_container_attach_groups(container, driver, data); + if (!ret) { + container->iommu_driver = driver; + container->iommu_data = data; + } else { + driver->ops->release(data); + module_put(driver->ops->owner); + } + + goto skip_drivers_unlock; + } + + mutex_unlock(&vfio.iommu_drivers_lock); +skip_drivers_unlock: + mutex_unlock(&container->group_lock); + + return ret; +} + +static long vfio_fops_unl_ioctl(struct file *filep, + unsigned int cmd, unsigned long arg) +{ + struct vfio_container *container = filep->private_data; + struct vfio_iommu_driver *driver; + void *data; + long ret = -EINVAL; + + if (!container) + return ret; + + driver = container->iommu_driver; + data = container->iommu_data; + + switch (cmd) { + case VFIO_GET_API_VERSION: + ret = VFIO_API_VERSION; + break; + case VFIO_CHECK_EXTENSION: + ret = vfio_ioctl_check_extension(container, arg); + break; + case VFIO_SET_IOMMU: + ret = vfio_ioctl_set_iommu(container, arg); + break; + default: + if (driver) /* passthrough all unrecognized ioctls */ + ret = driver->ops->ioctl(data, cmd, arg); + } + + return ret; +} + +#ifdef CONFIG_COMPAT +static long vfio_fops_compat_ioctl(struct file *filep, + unsigned int cmd, unsigned long arg) +{ + arg = (unsigned long)compat_ptr(arg); + return vfio_fops_unl_ioctl(filep, cmd, arg); +} +#endif /* CONFIG_COMPAT */ + +static int vfio_fops_open(struct inode *inode, struct file *filep) +{ + struct vfio_container *container; + + container = kzalloc(sizeof(*container), GFP_KERNEL); + if (!container) + return -ENOMEM; + + INIT_LIST_HEAD(&container->group_list); + mutex_init(&container->group_lock); + kref_init(&container->kref); + + filep->private_data = container; + + return 0; +} + +static int vfio_fops_release(struct inode *inode, struct file *filep) +{ + struct vfio_container *container = filep->private_data; + + filep->private_data = NULL; + + vfio_container_put(container); + + return 0; +} + +/* + * Once an iommu driver is set, we optionally pass read/write/mmap + * on to the driver, allowing management interfaces beyond ioctl. + */ +static ssize_t vfio_fops_read(struct file *filep, char __user *buf, + size_t count, loff_t *ppos) +{ + struct vfio_container *container = filep->private_data; + struct vfio_iommu_driver *driver = container->iommu_driver; + + if (unlikely(!driver || !driver->ops->read)) + return -EINVAL; + + return driver->ops->read(container->iommu_data, buf, count, ppos); +} + +static ssize_t vfio_fops_write(struct file *filep, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct vfio_container *container = filep->private_data; + struct vfio_iommu_driver *driver = container->iommu_driver; + + if (unlikely(!driver || !driver->ops->write)) + return -EINVAL; + + return driver->ops->write(container->iommu_data, buf, count, ppos); +} + +static int vfio_fops_mmap(struct file *filep, struct vm_area_struct *vma) +{ + struct vfio_container *container = filep->private_data; + struct vfio_iommu_driver *driver = container->iommu_driver; + + if (unlikely(!driver || !driver->ops->mmap)) + return -EINVAL; + + return driver->ops->mmap(container->iommu_data, vma); +} + +static const struct file_operations vfio_fops = { + .owner = THIS_MODULE, + .open = vfio_fops_open, + .release = vfio_fops_release, + .read = vfio_fops_read, + .write = vfio_fops_write, + .unlocked_ioctl = vfio_fops_unl_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = vfio_fops_compat_ioctl, +#endif + .mmap = vfio_fops_mmap, +}; + +/** + * VFIO Group fd, /dev/vfio/$GROUP + */ +static void __vfio_group_unset_container(struct vfio_group *group) +{ + struct vfio_container *container = group->container; + struct vfio_iommu_driver *driver; + + mutex_lock(&container->group_lock); + + driver = container->iommu_driver; + if (driver) + driver->ops->detach_group(container->iommu_data, + group->iommu_group); + + group->container = NULL; + list_del(&group->container_next); + + /* Detaching the last group deprivileges a container, remove iommu */ + if (driver && list_empty(&container->group_list)) { + driver->ops->release(container->iommu_data); + module_put(driver->ops->owner); + container->iommu_driver = NULL; + container->iommu_data = NULL; + } + + mutex_unlock(&container->group_lock); + + vfio_container_put(container); +} + +/* + * VFIO_GROUP_UNSET_CONTAINER should fail if there are other users or + * if there was no container to unset. Since the ioctl is called on + * the group, we know that still exists, therefore the only valid + * transition here is 1->0. + */ +static int vfio_group_unset_container(struct vfio_group *group) +{ + int users = atomic_cmpxchg(&group->container_users, 1, 0); + + if (!users) + return -EINVAL; + if (users != 1) + return -EBUSY; + + __vfio_group_unset_container(group); + + return 0; +} + +/* + * When removing container users, anything that removes the last user + * implicitly removes the group from the container. That is, if the + * group file descriptor is closed, as well as any device file descriptors, + * the group is free. + */ +static void vfio_group_try_dissolve_container(struct vfio_group *group) +{ + if (0 == atomic_dec_if_positive(&group->container_users)) + __vfio_group_unset_container(group); +} + +static int vfio_group_set_container(struct vfio_group *group, int container_fd) +{ + struct file *filep; + struct vfio_container *container; + struct vfio_iommu_driver *driver; + int ret = 0; + + if (atomic_read(&group->container_users)) + return -EINVAL; + + filep = fget(container_fd); + if (!filep) + return -EBADF; + + /* Sanity check, is this really our fd? */ + if (filep->f_op != &vfio_fops) { + fput(filep); + return -EINVAL; + } + + container = filep->private_data; + WARN_ON(!container); /* fget ensures we don't race vfio_release */ + + mutex_lock(&container->group_lock); + + driver = container->iommu_driver; + if (driver) { + ret = driver->ops->attach_group(container->iommu_data, + group->iommu_group); + if (ret) + goto unlock_out; + } + + group->container = container; + list_add(&group->container_next, &container->group_list); + + /* Get a reference on the container and mark a user within the group */ + vfio_container_get(container); + atomic_inc(&group->container_users); + +unlock_out: + mutex_unlock(&container->group_lock); + fput(filep); + + return ret; +} + +static bool vfio_group_viable(struct vfio_group *group) +{ + return (iommu_group_for_each_dev(group->iommu_group, + group, vfio_dev_viable) == 0); +} + +static const struct file_operations vfio_device_fops; + +static int vfio_group_get_device_fd(struct vfio_group *group, char *buf) +{ + struct vfio_device *device; + struct file *filep; + int ret = -ENODEV; + + if (0 == atomic_read(&group->container_users) || + !group->container->iommu_driver || !vfio_group_viable(group)) + return -EINVAL; + + mutex_lock(&group->device_lock); + list_for_each_entry(device, &group->device_list, group_next) { + if (strcmp(dev_name(device->dev), buf)) + continue; + + ret = device->ops->open(device->device_data); + if (ret) + break; + /* + * We can't use anon_inode_getfd() because we need to modify + * the f_mode flags directly to allow more than just ioctls + */ + ret = get_unused_fd(); + if (ret < 0) { + device->ops->release(device->device_data); + break; + } + + filep = anon_inode_getfile("[vfio-device]", &vfio_device_fops, + device, O_RDWR); + if (IS_ERR(filep)) { + put_unused_fd(ret); + ret = PTR_ERR(filep); + device->ops->release(device->device_data); + break; + } + + /* + * TODO: add an anon_inode interface to do this. + * Appears to be missing by lack of need rather than + * explicitly prevented. Now there's need. + */ + filep->f_mode |= (FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE); + + vfio_device_get(device); + atomic_inc(&group->container_users); + + fd_install(ret, filep); + break; + } + mutex_unlock(&group->device_lock); + + return ret; +} + +static long vfio_group_fops_unl_ioctl(struct file *filep, + unsigned int cmd, unsigned long arg) +{ + struct vfio_group *group = filep->private_data; + long ret = -ENOTTY; + + switch (cmd) { + case VFIO_GROUP_GET_STATUS: + { + struct vfio_group_status status; + unsigned long minsz; + + minsz = offsetofend(struct vfio_group_status, flags); + + if (copy_from_user(&status, (void __user *)arg, minsz)) + return -EFAULT; + + if (status.argsz < minsz) + return -EINVAL; + + status.flags = 0; + + if (vfio_group_viable(group)) + status.flags |= VFIO_GROUP_FLAGS_VIABLE; + + if (group->container) + status.flags |= VFIO_GROUP_FLAGS_CONTAINER_SET; + + if (copy_to_user((void __user *)arg, &status, minsz)) + return -EFAULT; + + ret = 0; + break; + } + case VFIO_GROUP_SET_CONTAINER: + { + int fd; + + if (get_user(fd, (int __user *)arg)) + return -EFAULT; + + if (fd < 0) + return -EINVAL; + + ret = vfio_group_set_container(group, fd); + break; + } + case VFIO_GROUP_UNSET_CONTAINER: + ret = vfio_group_unset_container(group); + break; + case VFIO_GROUP_GET_DEVICE_FD: + { + char *buf; + + buf = strndup_user((const char __user *)arg, PAGE_SIZE); + if (IS_ERR(buf)) + return PTR_ERR(buf); + + ret = vfio_group_get_device_fd(group, buf); + kfree(buf); + break; + } + } + + return ret; +} + +#ifdef CONFIG_COMPAT +static long vfio_group_fops_compat_ioctl(struct file *filep, + unsigned int cmd, unsigned long arg) +{ + arg = (unsigned long)compat_ptr(arg); + return vfio_group_fops_unl_ioctl(filep, cmd, arg); +} +#endif /* CONFIG_COMPAT */ + +static int vfio_group_fops_open(struct inode *inode, struct file *filep) +{ + struct vfio_group *group; + + group = vfio_group_get_from_minor(iminor(inode)); + if (!group) + return -ENODEV; + + if (group->container) { + vfio_group_put(group); + return -EBUSY; + } + + filep->private_data = group; + + return 0; +} + +static int vfio_group_fops_release(struct inode *inode, struct file *filep) +{ + struct vfio_group *group = filep->private_data; + + filep->private_data = NULL; + + vfio_group_try_dissolve_container(group); + + vfio_group_put(group); + + return 0; +} + +static const struct file_operations vfio_group_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = vfio_group_fops_unl_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = vfio_group_fops_compat_ioctl, +#endif + .open = vfio_group_fops_open, + .release = vfio_group_fops_release, +}; + +/** + * VFIO Device fd + */ +static int vfio_device_fops_release(struct inode *inode, struct file *filep) +{ + struct vfio_device *device = filep->private_data; + + device->ops->release(device->device_data); + + vfio_group_try_dissolve_container(device->group); + + vfio_device_put(device); + + return 0; +} + +static long vfio_device_fops_unl_ioctl(struct file *filep, + unsigned int cmd, unsigned long arg) +{ + struct vfio_device *device = filep->private_data; + + if (unlikely(!device->ops->ioctl)) + return -EINVAL; + + return device->ops->ioctl(device->device_data, cmd, arg); +} + +static ssize_t vfio_device_fops_read(struct file *filep, char __user *buf, + size_t count, loff_t *ppos) +{ + struct vfio_device *device = filep->private_data; + + if (unlikely(!device->ops->read)) + return -EINVAL; + + return device->ops->read(device->device_data, buf, count, ppos); +} + +static ssize_t vfio_device_fops_write(struct file *filep, + const char __user *buf, + size_t count, loff_t *ppos) +{ + struct vfio_device *device = filep->private_data; + + if (unlikely(!device->ops->write)) + return -EINVAL; + + return device->ops->write(device->device_data, buf, count, ppos); +} + +static int vfio_device_fops_mmap(struct file *filep, struct vm_area_struct *vma) +{ + struct vfio_device *device = filep->private_data; + + if (unlikely(!device->ops->mmap)) + return -EINVAL; + + return device->ops->mmap(device->device_data, vma); +} + +#ifdef CONFIG_COMPAT +static long vfio_device_fops_compat_ioctl(struct file *filep, + unsigned int cmd, unsigned long arg) +{ + arg = (unsigned long)compat_ptr(arg); + return vfio_device_fops_unl_ioctl(filep, cmd, arg); +} +#endif /* CONFIG_COMPAT */ + +static const struct file_operations vfio_device_fops = { + .owner = THIS_MODULE, + .release = vfio_device_fops_release, + .read = vfio_device_fops_read, + .write = vfio_device_fops_write, + .unlocked_ioctl = vfio_device_fops_unl_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = vfio_device_fops_compat_ioctl, +#endif + .mmap = vfio_device_fops_mmap, +}; + +/** + * Module/class support + */ +static char *vfio_devnode(struct device *dev, umode_t *mode) +{ + return kasprintf(GFP_KERNEL, "vfio/%s", dev_name(dev)); +} + +static int __init vfio_init(void) +{ + int ret; + + idr_init(&vfio.group_idr); + mutex_init(&vfio.group_lock); + mutex_init(&vfio.iommu_drivers_lock); + INIT_LIST_HEAD(&vfio.group_list); + INIT_LIST_HEAD(&vfio.iommu_drivers_list); + init_waitqueue_head(&vfio.release_q); + + vfio.class = class_create(THIS_MODULE, "vfio"); + if (IS_ERR(vfio.class)) { + ret = PTR_ERR(vfio.class); + goto err_class; + } + + vfio.class->devnode = vfio_devnode; + + ret = alloc_chrdev_region(&vfio.devt, 0, MINORMASK, "vfio"); + if (ret) + goto err_base_chrdev; + + cdev_init(&vfio.cdev, &vfio_fops); + ret = cdev_add(&vfio.cdev, vfio.devt, 1); + if (ret) + goto err_base_cdev; + + vfio.dev = device_create(vfio.class, NULL, vfio.devt, NULL, "vfio"); + if (IS_ERR(vfio.dev)) { + ret = PTR_ERR(vfio.dev); + goto err_base_dev; + } + + /* /dev/vfio/$GROUP */ + cdev_init(&vfio.group_cdev, &vfio_group_fops); + ret = cdev_add(&vfio.group_cdev, + MKDEV(MAJOR(vfio.devt), 1), MINORMASK - 1); + if (ret) + goto err_groups_cdev; + + pr_info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); + + /* + * Attempt to load known iommu-drivers. This gives us a working + * environment without the user needing to explicitly load iommu + * drivers. + */ + request_module_nowait("vfio_iommu_type1"); + + return 0; + +err_groups_cdev: + device_destroy(vfio.class, vfio.devt); +err_base_dev: + cdev_del(&vfio.cdev); +err_base_cdev: + unregister_chrdev_region(vfio.devt, MINORMASK); +err_base_chrdev: + class_destroy(vfio.class); + vfio.class = NULL; +err_class: + return ret; +} + +static void __exit vfio_cleanup(void) +{ + WARN_ON(!list_empty(&vfio.group_list)); + + idr_destroy(&vfio.group_idr); + cdev_del(&vfio.group_cdev); + device_destroy(vfio.class, vfio.devt); + cdev_del(&vfio.cdev); + unregister_chrdev_region(vfio.devt, MINORMASK); + class_destroy(vfio.class); + vfio.class = NULL; +} + +module_init(vfio_init); +module_exit(vfio_cleanup); + +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c new file mode 100644 index 0000000000000000000000000000000000000000..6f3fbc48a6c73a2fc27d847176874ad65b68d83c --- /dev/null +++ b/drivers/vfio/vfio_iommu_type1.c @@ -0,0 +1,753 @@ +/* + * VFIO: IOMMU DMA mapping support for Type1 IOMMU + * + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from original vfio: + * Copyright 2010 Cisco Systems, Inc. All rights reserved. + * Author: Tom Lyon, pugs@cisco.com + * + * We arbitrarily define a Type1 IOMMU as one matching the below code. + * It could be called the x86 IOMMU as it's designed for AMD-Vi & Intel + * VT-d, but that makes it harder to re-use as theoretically anyone + * implementing a similar IOMMU could make use of this. We expect the + * IOMMU to support the IOMMU API and have few to no restrictions around + * the IOVA range that can be mapped. The Type1 IOMMU is currently + * optimized for relatively static mappings of a userspace process with + * userpsace pages pinned into memory. We also assume devices and IOMMU + * domains are PCI based as the IOMMU API is still centered around a + * device/bus interface rather than a group interface. + */ + +#include +#include +#include +#include +#include +#include +#include /* pci_bus_type */ +#include +#include +#include +#include +#include + +#define DRIVER_VERSION "0.2" +#define DRIVER_AUTHOR "Alex Williamson " +#define DRIVER_DESC "Type1 IOMMU driver for VFIO" + +static bool allow_unsafe_interrupts; +module_param_named(allow_unsafe_interrupts, + allow_unsafe_interrupts, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(allow_unsafe_interrupts, + "Enable VFIO IOMMU support for on platforms without interrupt remapping support."); + +struct vfio_iommu { + struct iommu_domain *domain; + struct mutex lock; + struct list_head dma_list; + struct list_head group_list; + bool cache; +}; + +struct vfio_dma { + struct list_head next; + dma_addr_t iova; /* Device address */ + unsigned long vaddr; /* Process virtual addr */ + long npage; /* Number of pages */ + int prot; /* IOMMU_READ/WRITE */ +}; + +struct vfio_group { + struct iommu_group *iommu_group; + struct list_head next; +}; + +/* + * This code handles mapping and unmapping of user data buffers + * into DMA'ble space using the IOMMU + */ + +#define NPAGE_TO_SIZE(npage) ((size_t)(npage) << PAGE_SHIFT) + +struct vwork { + struct mm_struct *mm; + long npage; + struct work_struct work; +}; + +/* delayed decrement/increment for locked_vm */ +static void vfio_lock_acct_bg(struct work_struct *work) +{ + struct vwork *vwork = container_of(work, struct vwork, work); + struct mm_struct *mm; + + mm = vwork->mm; + down_write(&mm->mmap_sem); + mm->locked_vm += vwork->npage; + up_write(&mm->mmap_sem); + mmput(mm); + kfree(vwork); +} + +static void vfio_lock_acct(long npage) +{ + struct vwork *vwork; + struct mm_struct *mm; + + if (!current->mm) + return; /* process exited */ + + if (down_write_trylock(¤t->mm->mmap_sem)) { + current->mm->locked_vm += npage; + up_write(¤t->mm->mmap_sem); + return; + } + + /* + * Couldn't get mmap_sem lock, so must setup to update + * mm->locked_vm later. If locked_vm were atomic, we + * wouldn't need this silliness + */ + vwork = kmalloc(sizeof(struct vwork), GFP_KERNEL); + if (!vwork) + return; + mm = get_task_mm(current); + if (!mm) { + kfree(vwork); + return; + } + INIT_WORK(&vwork->work, vfio_lock_acct_bg); + vwork->mm = mm; + vwork->npage = npage; + schedule_work(&vwork->work); +} + +/* + * Some mappings aren't backed by a struct page, for example an mmap'd + * MMIO range for our own or another device. These use a different + * pfn conversion and shouldn't be tracked as locked pages. + */ +static bool is_invalid_reserved_pfn(unsigned long pfn) +{ + if (pfn_valid(pfn)) { + bool reserved; + struct page *tail = pfn_to_page(pfn); + struct page *head = compound_trans_head(tail); + reserved = !!(PageReserved(head)); + if (head != tail) { + /* + * "head" is not a dangling pointer + * (compound_trans_head takes care of that) + * but the hugepage may have been split + * from under us (and we may not hold a + * reference count on the head page so it can + * be reused before we run PageReferenced), so + * we've to check PageTail before returning + * what we just read. + */ + smp_rmb(); + if (PageTail(tail)) + return reserved; + } + return PageReserved(tail); + } + + return true; +} + +static int put_pfn(unsigned long pfn, int prot) +{ + if (!is_invalid_reserved_pfn(pfn)) { + struct page *page = pfn_to_page(pfn); + if (prot & IOMMU_WRITE) + SetPageDirty(page); + put_page(page); + return 1; + } + return 0; +} + +/* Unmap DMA region */ +static long __vfio_dma_do_unmap(struct vfio_iommu *iommu, dma_addr_t iova, + long npage, int prot) +{ + long i, unlocked = 0; + + for (i = 0; i < npage; i++, iova += PAGE_SIZE) { + unsigned long pfn; + + pfn = iommu_iova_to_phys(iommu->domain, iova) >> PAGE_SHIFT; + if (pfn) { + iommu_unmap(iommu->domain, iova, PAGE_SIZE); + unlocked += put_pfn(pfn, prot); + } + } + return unlocked; +} + +static void vfio_dma_unmap(struct vfio_iommu *iommu, dma_addr_t iova, + long npage, int prot) +{ + long unlocked; + + unlocked = __vfio_dma_do_unmap(iommu, iova, npage, prot); + vfio_lock_acct(-unlocked); +} + +static int vaddr_get_pfn(unsigned long vaddr, int prot, unsigned long *pfn) +{ + struct page *page[1]; + struct vm_area_struct *vma; + int ret = -EFAULT; + + if (get_user_pages_fast(vaddr, 1, !!(prot & IOMMU_WRITE), page) == 1) { + *pfn = page_to_pfn(page[0]); + return 0; + } + + down_read(¤t->mm->mmap_sem); + + vma = find_vma_intersection(current->mm, vaddr, vaddr + 1); + + if (vma && vma->vm_flags & VM_PFNMAP) { + *pfn = ((vaddr - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff; + if (is_invalid_reserved_pfn(*pfn)) + ret = 0; + } + + up_read(¤t->mm->mmap_sem); + + return ret; +} + +/* Map DMA region */ +static int __vfio_dma_map(struct vfio_iommu *iommu, dma_addr_t iova, + unsigned long vaddr, long npage, int prot) +{ + dma_addr_t start = iova; + long i, locked = 0; + int ret; + + /* Verify that pages are not already mapped */ + for (i = 0; i < npage; i++, iova += PAGE_SIZE) + if (iommu_iova_to_phys(iommu->domain, iova)) + return -EBUSY; + + iova = start; + + if (iommu->cache) + prot |= IOMMU_CACHE; + + /* + * XXX We break mappings into pages and use get_user_pages_fast to + * pin the pages in memory. It's been suggested that mlock might + * provide a more efficient mechanism, but nothing prevents the + * user from munlocking the pages, which could then allow the user + * access to random host memory. We also have no guarantee from the + * IOMMU API that the iommu driver can unmap sub-pages of previous + * mappings. This means we might lose an entire range if a single + * page within it is unmapped. Single page mappings are inefficient, + * but provide the most flexibility for now. + */ + for (i = 0; i < npage; i++, iova += PAGE_SIZE, vaddr += PAGE_SIZE) { + unsigned long pfn = 0; + + ret = vaddr_get_pfn(vaddr, prot, &pfn); + if (ret) { + __vfio_dma_do_unmap(iommu, start, i, prot); + return ret; + } + + /* + * Only add actual locked pages to accounting + * XXX We're effectively marking a page locked for every + * IOVA page even though it's possible the user could be + * backing multiple IOVAs with the same vaddr. This over- + * penalizes the user process, but we currently have no + * easy way to do this properly. + */ + if (!is_invalid_reserved_pfn(pfn)) + locked++; + + ret = iommu_map(iommu->domain, iova, + (phys_addr_t)pfn << PAGE_SHIFT, + PAGE_SIZE, prot); + if (ret) { + /* Back out mappings on error */ + put_pfn(pfn, prot); + __vfio_dma_do_unmap(iommu, start, i, prot); + return ret; + } + } + vfio_lock_acct(locked); + return 0; +} + +static inline bool ranges_overlap(dma_addr_t start1, size_t size1, + dma_addr_t start2, size_t size2) +{ + if (start1 < start2) + return (start2 - start1 < size1); + else if (start2 < start1) + return (start1 - start2 < size2); + return (size1 > 0 && size2 > 0); +} + +static struct vfio_dma *vfio_find_dma(struct vfio_iommu *iommu, + dma_addr_t start, size_t size) +{ + struct vfio_dma *dma; + + list_for_each_entry(dma, &iommu->dma_list, next) { + if (ranges_overlap(dma->iova, NPAGE_TO_SIZE(dma->npage), + start, size)) + return dma; + } + return NULL; +} + +static long vfio_remove_dma_overlap(struct vfio_iommu *iommu, dma_addr_t start, + size_t size, struct vfio_dma *dma) +{ + struct vfio_dma *split; + long npage_lo, npage_hi; + + /* Existing dma region is completely covered, unmap all */ + if (start <= dma->iova && + start + size >= dma->iova + NPAGE_TO_SIZE(dma->npage)) { + vfio_dma_unmap(iommu, dma->iova, dma->npage, dma->prot); + list_del(&dma->next); + npage_lo = dma->npage; + kfree(dma); + return npage_lo; + } + + /* Overlap low address of existing range */ + if (start <= dma->iova) { + size_t overlap; + + overlap = start + size - dma->iova; + npage_lo = overlap >> PAGE_SHIFT; + + vfio_dma_unmap(iommu, dma->iova, npage_lo, dma->prot); + dma->iova += overlap; + dma->vaddr += overlap; + dma->npage -= npage_lo; + return npage_lo; + } + + /* Overlap high address of existing range */ + if (start + size >= dma->iova + NPAGE_TO_SIZE(dma->npage)) { + size_t overlap; + + overlap = dma->iova + NPAGE_TO_SIZE(dma->npage) - start; + npage_hi = overlap >> PAGE_SHIFT; + + vfio_dma_unmap(iommu, start, npage_hi, dma->prot); + dma->npage -= npage_hi; + return npage_hi; + } + + /* Split existing */ + npage_lo = (start - dma->iova) >> PAGE_SHIFT; + npage_hi = dma->npage - (size >> PAGE_SHIFT) - npage_lo; + + split = kzalloc(sizeof *split, GFP_KERNEL); + if (!split) + return -ENOMEM; + + vfio_dma_unmap(iommu, start, size >> PAGE_SHIFT, dma->prot); + + dma->npage = npage_lo; + + split->npage = npage_hi; + split->iova = start + size; + split->vaddr = dma->vaddr + NPAGE_TO_SIZE(npage_lo) + size; + split->prot = dma->prot; + list_add(&split->next, &iommu->dma_list); + return size >> PAGE_SHIFT; +} + +static int vfio_dma_do_unmap(struct vfio_iommu *iommu, + struct vfio_iommu_type1_dma_unmap *unmap) +{ + long ret = 0, npage = unmap->size >> PAGE_SHIFT; + struct vfio_dma *dma, *tmp; + uint64_t mask; + + mask = ((uint64_t)1 << __ffs(iommu->domain->ops->pgsize_bitmap)) - 1; + + if (unmap->iova & mask) + return -EINVAL; + if (unmap->size & mask) + return -EINVAL; + + /* XXX We still break these down into PAGE_SIZE */ + WARN_ON(mask & PAGE_MASK); + + mutex_lock(&iommu->lock); + + list_for_each_entry_safe(dma, tmp, &iommu->dma_list, next) { + if (ranges_overlap(dma->iova, NPAGE_TO_SIZE(dma->npage), + unmap->iova, unmap->size)) { + ret = vfio_remove_dma_overlap(iommu, unmap->iova, + unmap->size, dma); + if (ret > 0) + npage -= ret; + if (ret < 0 || npage == 0) + break; + } + } + mutex_unlock(&iommu->lock); + return ret > 0 ? 0 : (int)ret; +} + +static int vfio_dma_do_map(struct vfio_iommu *iommu, + struct vfio_iommu_type1_dma_map *map) +{ + struct vfio_dma *dma, *pdma = NULL; + dma_addr_t iova = map->iova; + unsigned long locked, lock_limit, vaddr = map->vaddr; + size_t size = map->size; + int ret = 0, prot = 0; + uint64_t mask; + long npage; + + mask = ((uint64_t)1 << __ffs(iommu->domain->ops->pgsize_bitmap)) - 1; + + /* READ/WRITE from device perspective */ + if (map->flags & VFIO_DMA_MAP_FLAG_WRITE) + prot |= IOMMU_WRITE; + if (map->flags & VFIO_DMA_MAP_FLAG_READ) + prot |= IOMMU_READ; + + if (!prot) + return -EINVAL; /* No READ/WRITE? */ + + if (vaddr & mask) + return -EINVAL; + if (iova & mask) + return -EINVAL; + if (size & mask) + return -EINVAL; + + /* XXX We still break these down into PAGE_SIZE */ + WARN_ON(mask & PAGE_MASK); + + /* Don't allow IOVA wrap */ + if (iova + size && iova + size < iova) + return -EINVAL; + + /* Don't allow virtual address wrap */ + if (vaddr + size && vaddr + size < vaddr) + return -EINVAL; + + npage = size >> PAGE_SHIFT; + if (!npage) + return -EINVAL; + + mutex_lock(&iommu->lock); + + if (vfio_find_dma(iommu, iova, size)) { + ret = -EBUSY; + goto out_lock; + } + + /* account for locked pages */ + locked = current->mm->locked_vm + npage; + lock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT; + if (locked > lock_limit && !capable(CAP_IPC_LOCK)) { + pr_warn("%s: RLIMIT_MEMLOCK (%ld) exceeded\n", + __func__, rlimit(RLIMIT_MEMLOCK)); + ret = -ENOMEM; + goto out_lock; + } + + ret = __vfio_dma_map(iommu, iova, vaddr, npage, prot); + if (ret) + goto out_lock; + + /* Check if we abut a region below - nothing below 0 */ + if (iova) { + dma = vfio_find_dma(iommu, iova - 1, 1); + if (dma && dma->prot == prot && + dma->vaddr + NPAGE_TO_SIZE(dma->npage) == vaddr) { + + dma->npage += npage; + iova = dma->iova; + vaddr = dma->vaddr; + npage = dma->npage; + size = NPAGE_TO_SIZE(npage); + + pdma = dma; + } + } + + /* Check if we abut a region above - nothing above ~0 + 1 */ + if (iova + size) { + dma = vfio_find_dma(iommu, iova + size, 1); + if (dma && dma->prot == prot && + dma->vaddr == vaddr + size) { + + dma->npage += npage; + dma->iova = iova; + dma->vaddr = vaddr; + + /* + * If merged above and below, remove previously + * merged entry. New entry covers it. + */ + if (pdma) { + list_del(&pdma->next); + kfree(pdma); + } + pdma = dma; + } + } + + /* Isolated, new region */ + if (!pdma) { + dma = kzalloc(sizeof *dma, GFP_KERNEL); + if (!dma) { + ret = -ENOMEM; + vfio_dma_unmap(iommu, iova, npage, prot); + goto out_lock; + } + + dma->npage = npage; + dma->iova = iova; + dma->vaddr = vaddr; + dma->prot = prot; + list_add(&dma->next, &iommu->dma_list); + } + +out_lock: + mutex_unlock(&iommu->lock); + return ret; +} + +static int vfio_iommu_type1_attach_group(void *iommu_data, + struct iommu_group *iommu_group) +{ + struct vfio_iommu *iommu = iommu_data; + struct vfio_group *group, *tmp; + int ret; + + group = kzalloc(sizeof(*group), GFP_KERNEL); + if (!group) + return -ENOMEM; + + mutex_lock(&iommu->lock); + + list_for_each_entry(tmp, &iommu->group_list, next) { + if (tmp->iommu_group == iommu_group) { + mutex_unlock(&iommu->lock); + kfree(group); + return -EINVAL; + } + } + + /* + * TODO: Domain have capabilities that might change as we add + * groups (see iommu->cache, currently never set). Check for + * them and potentially disallow groups to be attached when it + * would change capabilities (ugh). + */ + ret = iommu_attach_group(iommu->domain, iommu_group); + if (ret) { + mutex_unlock(&iommu->lock); + kfree(group); + return ret; + } + + group->iommu_group = iommu_group; + list_add(&group->next, &iommu->group_list); + + mutex_unlock(&iommu->lock); + + return 0; +} + +static void vfio_iommu_type1_detach_group(void *iommu_data, + struct iommu_group *iommu_group) +{ + struct vfio_iommu *iommu = iommu_data; + struct vfio_group *group; + + mutex_lock(&iommu->lock); + + list_for_each_entry(group, &iommu->group_list, next) { + if (group->iommu_group == iommu_group) { + iommu_detach_group(iommu->domain, iommu_group); + list_del(&group->next); + kfree(group); + break; + } + } + + mutex_unlock(&iommu->lock); +} + +static void *vfio_iommu_type1_open(unsigned long arg) +{ + struct vfio_iommu *iommu; + + if (arg != VFIO_TYPE1_IOMMU) + return ERR_PTR(-EINVAL); + + iommu = kzalloc(sizeof(*iommu), GFP_KERNEL); + if (!iommu) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&iommu->group_list); + INIT_LIST_HEAD(&iommu->dma_list); + mutex_init(&iommu->lock); + + /* + * Wish we didn't have to know about bus_type here. + */ + iommu->domain = iommu_domain_alloc(&pci_bus_type); + if (!iommu->domain) { + kfree(iommu); + return ERR_PTR(-EIO); + } + + /* + * Wish we could specify required capabilities rather than create + * a domain, see what comes out and hope it doesn't change along + * the way. Fortunately we know interrupt remapping is global for + * our iommus. + */ + if (!allow_unsafe_interrupts && + !iommu_domain_has_cap(iommu->domain, IOMMU_CAP_INTR_REMAP)) { + pr_warn("%s: No interrupt remapping support. Use the module param \"allow_unsafe_interrupts\" to enable VFIO IOMMU support on this platform\n", + __func__); + iommu_domain_free(iommu->domain); + kfree(iommu); + return ERR_PTR(-EPERM); + } + + return iommu; +} + +static void vfio_iommu_type1_release(void *iommu_data) +{ + struct vfio_iommu *iommu = iommu_data; + struct vfio_group *group, *group_tmp; + struct vfio_dma *dma, *dma_tmp; + + list_for_each_entry_safe(group, group_tmp, &iommu->group_list, next) { + iommu_detach_group(iommu->domain, group->iommu_group); + list_del(&group->next); + kfree(group); + } + + list_for_each_entry_safe(dma, dma_tmp, &iommu->dma_list, next) { + vfio_dma_unmap(iommu, dma->iova, dma->npage, dma->prot); + list_del(&dma->next); + kfree(dma); + } + + iommu_domain_free(iommu->domain); + iommu->domain = NULL; + kfree(iommu); +} + +static long vfio_iommu_type1_ioctl(void *iommu_data, + unsigned int cmd, unsigned long arg) +{ + struct vfio_iommu *iommu = iommu_data; + unsigned long minsz; + + if (cmd == VFIO_CHECK_EXTENSION) { + switch (arg) { + case VFIO_TYPE1_IOMMU: + return 1; + default: + return 0; + } + } else if (cmd == VFIO_IOMMU_GET_INFO) { + struct vfio_iommu_type1_info info; + + minsz = offsetofend(struct vfio_iommu_type1_info, iova_pgsizes); + + if (copy_from_user(&info, (void __user *)arg, minsz)) + return -EFAULT; + + if (info.argsz < minsz) + return -EINVAL; + + info.flags = 0; + + info.iova_pgsizes = iommu->domain->ops->pgsize_bitmap; + + return copy_to_user((void __user *)arg, &info, minsz); + + } else if (cmd == VFIO_IOMMU_MAP_DMA) { + struct vfio_iommu_type1_dma_map map; + uint32_t mask = VFIO_DMA_MAP_FLAG_READ | + VFIO_DMA_MAP_FLAG_WRITE; + + minsz = offsetofend(struct vfio_iommu_type1_dma_map, size); + + if (copy_from_user(&map, (void __user *)arg, minsz)) + return -EFAULT; + + if (map.argsz < minsz || map.flags & ~mask) + return -EINVAL; + + return vfio_dma_do_map(iommu, &map); + + } else if (cmd == VFIO_IOMMU_UNMAP_DMA) { + struct vfio_iommu_type1_dma_unmap unmap; + + minsz = offsetofend(struct vfio_iommu_type1_dma_unmap, size); + + if (copy_from_user(&unmap, (void __user *)arg, minsz)) + return -EFAULT; + + if (unmap.argsz < minsz || unmap.flags) + return -EINVAL; + + return vfio_dma_do_unmap(iommu, &unmap); + } + + return -ENOTTY; +} + +static const struct vfio_iommu_driver_ops vfio_iommu_driver_ops_type1 = { + .name = "vfio-iommu-type1", + .owner = THIS_MODULE, + .open = vfio_iommu_type1_open, + .release = vfio_iommu_type1_release, + .ioctl = vfio_iommu_type1_ioctl, + .attach_group = vfio_iommu_type1_attach_group, + .detach_group = vfio_iommu_type1_detach_group, +}; + +static int __init vfio_iommu_type1_init(void) +{ + if (!iommu_present(&pci_bus_type)) + return -ENODEV; + + return vfio_register_iommu_driver(&vfio_iommu_driver_ops_type1); +} + +static void __exit vfio_iommu_type1_cleanup(void) +{ + vfio_unregister_iommu_driver(&vfio_iommu_driver_ops_type1); +} + +module_init(vfio_iommu_type1_init); +module_exit(vfio_iommu_type1_cleanup); + +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig index e4e2fd1b51076dfbc8ffc73920ac148d830c4d4f..202bba6c997cce61eb116fc74db8e842454ce1f4 100644 --- a/drivers/vhost/Kconfig +++ b/drivers/vhost/Kconfig @@ -9,3 +9,6 @@ config VHOST_NET To compile this driver as a module, choose M here: the module will be called vhost_net. +if STAGING +source "drivers/vhost/Kconfig.tcm" +endif diff --git a/drivers/vhost/Kconfig.tcm b/drivers/vhost/Kconfig.tcm new file mode 100644 index 0000000000000000000000000000000000000000..a9c6f76e3208f0a7dd6c2f544fdc04d78734908c --- /dev/null +++ b/drivers/vhost/Kconfig.tcm @@ -0,0 +1,6 @@ +config TCM_VHOST + tristate "TCM_VHOST fabric module (EXPERIMENTAL)" + depends on TARGET_CORE && EVENTFD && EXPERIMENTAL && m + default n + ---help--- + Say M here to enable the TCM_VHOST fabric module for use with virtio-scsi guests diff --git a/drivers/vhost/Makefile b/drivers/vhost/Makefile index 72dd02050bb986cf6d426828f64ea521aaff3284..a27b053bc9ab12d546c9f17bee106a916eb5e236 100644 --- a/drivers/vhost/Makefile +++ b/drivers/vhost/Makefile @@ -1,2 +1,4 @@ obj-$(CONFIG_VHOST_NET) += vhost_net.o vhost_net-y := vhost.o net.o + +obj-$(CONFIG_TCM_VHOST) += tcm_vhost.o diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c new file mode 100644 index 0000000000000000000000000000000000000000..ed8e2e6c8df28715455c7ac09423ef447115e976 --- /dev/null +++ b/drivers/vhost/tcm_vhost.c @@ -0,0 +1,1649 @@ +/******************************************************************************* + * Vhost kernel TCM fabric driver for virtio SCSI initiators + * + * (C) Copyright 2010-2012 RisingTide Systems LLC. + * (C) Copyright 2010-2012 IBM Corp. + * + * Licensed to the Linux Foundation under the General Public License (GPL) version 2. + * + * Authors: Nicholas A. Bellinger + * Stefan Hajnoczi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + ****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* TODO vhost.h currently depends on this */ +#include + +#include "vhost.c" +#include "vhost.h" +#include "tcm_vhost.h" + +enum { + VHOST_SCSI_VQ_CTL = 0, + VHOST_SCSI_VQ_EVT = 1, + VHOST_SCSI_VQ_IO = 2, +}; + +struct vhost_scsi { + struct tcm_vhost_tpg *vs_tpg; /* Protected by vhost_scsi->dev.mutex */ + struct vhost_dev dev; + struct vhost_virtqueue vqs[3]; + + struct vhost_work vs_completion_work; /* cmd completion work item */ + struct list_head vs_completion_list; /* cmd completion queue */ + spinlock_t vs_completion_lock; /* protects s_completion_list */ +}; + +/* Local pointer to allocated TCM configfs fabric module */ +static struct target_fabric_configfs *tcm_vhost_fabric_configfs; + +static struct workqueue_struct *tcm_vhost_workqueue; + +/* Global spinlock to protect tcm_vhost TPG list for vhost IOCTL access */ +static DEFINE_MUTEX(tcm_vhost_mutex); +static LIST_HEAD(tcm_vhost_list); + +static int tcm_vhost_check_true(struct se_portal_group *se_tpg) +{ + return 1; +} + +static int tcm_vhost_check_false(struct se_portal_group *se_tpg) +{ + return 0; +} + +static char *tcm_vhost_get_fabric_name(void) +{ + return "vhost"; +} + +static u8 tcm_vhost_get_fabric_proto_ident(struct se_portal_group *se_tpg) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_tport *tport = tpg->tport; + + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + return sas_get_fabric_proto_ident(se_tpg); + case SCSI_PROTOCOL_FCP: + return fc_get_fabric_proto_ident(se_tpg); + case SCSI_PROTOCOL_ISCSI: + return iscsi_get_fabric_proto_ident(se_tpg); + default: + pr_err("Unknown tport_proto_id: 0x%02x, using" + " SAS emulation\n", tport->tport_proto_id); + break; + } + + return sas_get_fabric_proto_ident(se_tpg); +} + +static char *tcm_vhost_get_fabric_wwn(struct se_portal_group *se_tpg) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_tport *tport = tpg->tport; + + return &tport->tport_name[0]; +} + +static u16 tcm_vhost_get_tag(struct se_portal_group *se_tpg) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + return tpg->tport_tpgt; +} + +static u32 tcm_vhost_get_default_depth(struct se_portal_group *se_tpg) +{ + return 1; +} + +static u32 tcm_vhost_get_pr_transport_id(struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code, + unsigned char *buf) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_tport *tport = tpg->tport; + + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + return sas_get_pr_transport_id(se_tpg, se_nacl, pr_reg, + format_code, buf); + case SCSI_PROTOCOL_FCP: + return fc_get_pr_transport_id(se_tpg, se_nacl, pr_reg, + format_code, buf); + case SCSI_PROTOCOL_ISCSI: + return iscsi_get_pr_transport_id(se_tpg, se_nacl, pr_reg, + format_code, buf); + default: + pr_err("Unknown tport_proto_id: 0x%02x, using" + " SAS emulation\n", tport->tport_proto_id); + break; + } + + return sas_get_pr_transport_id(se_tpg, se_nacl, pr_reg, + format_code, buf); +} + +static u32 tcm_vhost_get_pr_transport_id_len(struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_tport *tport = tpg->tport; + + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + return sas_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg, + format_code); + case SCSI_PROTOCOL_FCP: + return fc_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg, + format_code); + case SCSI_PROTOCOL_ISCSI: + return iscsi_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg, + format_code); + default: + pr_err("Unknown tport_proto_id: 0x%02x, using" + " SAS emulation\n", tport->tport_proto_id); + break; + } + + return sas_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg, + format_code); +} + +static char *tcm_vhost_parse_pr_out_transport_id(struct se_portal_group *se_tpg, + const char *buf, + u32 *out_tid_len, + char **port_nexus_ptr) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_tport *tport = tpg->tport; + + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + return sas_parse_pr_out_transport_id(se_tpg, buf, out_tid_len, + port_nexus_ptr); + case SCSI_PROTOCOL_FCP: + return fc_parse_pr_out_transport_id(se_tpg, buf, out_tid_len, + port_nexus_ptr); + case SCSI_PROTOCOL_ISCSI: + return iscsi_parse_pr_out_transport_id(se_tpg, buf, out_tid_len, + port_nexus_ptr); + default: + pr_err("Unknown tport_proto_id: 0x%02x, using" + " SAS emulation\n", tport->tport_proto_id); + break; + } + + return sas_parse_pr_out_transport_id(se_tpg, buf, out_tid_len, + port_nexus_ptr); +} + +static struct se_node_acl *tcm_vhost_alloc_fabric_acl( + struct se_portal_group *se_tpg) +{ + struct tcm_vhost_nacl *nacl; + + nacl = kzalloc(sizeof(struct tcm_vhost_nacl), GFP_KERNEL); + if (!nacl) { + pr_err("Unable to alocate struct tcm_vhost_nacl\n"); + return NULL; + } + + return &nacl->se_node_acl; +} + +static void tcm_vhost_release_fabric_acl(struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl) +{ + struct tcm_vhost_nacl *nacl = container_of(se_nacl, + struct tcm_vhost_nacl, se_node_acl); + kfree(nacl); +} + +static u32 tcm_vhost_tpg_get_inst_index(struct se_portal_group *se_tpg) +{ + return 1; +} + +static void tcm_vhost_release_cmd(struct se_cmd *se_cmd) +{ + return; +} + +static int tcm_vhost_shutdown_session(struct se_session *se_sess) +{ + return 0; +} + +static void tcm_vhost_close_session(struct se_session *se_sess) +{ + return; +} + +static u32 tcm_vhost_sess_get_index(struct se_session *se_sess) +{ + return 0; +} + +static int tcm_vhost_write_pending(struct se_cmd *se_cmd) +{ + /* Go ahead and process the write immediately */ + target_execute_cmd(se_cmd); + return 0; +} + +static int tcm_vhost_write_pending_status(struct se_cmd *se_cmd) +{ + return 0; +} + +static void tcm_vhost_set_default_node_attrs(struct se_node_acl *nacl) +{ + return; +} + +static u32 tcm_vhost_get_task_tag(struct se_cmd *se_cmd) +{ + return 0; +} + +static int tcm_vhost_get_cmd_state(struct se_cmd *se_cmd) +{ + return 0; +} + +static void vhost_scsi_complete_cmd(struct tcm_vhost_cmd *tv_cmd) +{ + struct vhost_scsi *vs = tv_cmd->tvc_vhost; + + spin_lock_bh(&vs->vs_completion_lock); + list_add_tail(&tv_cmd->tvc_completion_list, &vs->vs_completion_list); + spin_unlock_bh(&vs->vs_completion_lock); + + vhost_work_queue(&vs->dev, &vs->vs_completion_work); +} + +static int tcm_vhost_queue_data_in(struct se_cmd *se_cmd) +{ + struct tcm_vhost_cmd *tv_cmd = container_of(se_cmd, + struct tcm_vhost_cmd, tvc_se_cmd); + vhost_scsi_complete_cmd(tv_cmd); + return 0; +} + +static int tcm_vhost_queue_status(struct se_cmd *se_cmd) +{ + struct tcm_vhost_cmd *tv_cmd = container_of(se_cmd, + struct tcm_vhost_cmd, tvc_se_cmd); + vhost_scsi_complete_cmd(tv_cmd); + return 0; +} + +static int tcm_vhost_queue_tm_rsp(struct se_cmd *se_cmd) +{ + return 0; +} + +static u16 tcm_vhost_set_fabric_sense_len(struct se_cmd *se_cmd, + u32 sense_length) +{ + return 0; +} + +static u16 tcm_vhost_get_fabric_sense_len(void) +{ + return 0; +} + +static void vhost_scsi_free_cmd(struct tcm_vhost_cmd *tv_cmd) +{ + struct se_cmd *se_cmd = &tv_cmd->tvc_se_cmd; + + /* TODO locking against target/backend threads? */ + transport_generic_free_cmd(se_cmd, 1); + + if (tv_cmd->tvc_sgl_count) { + u32 i; + for (i = 0; i < tv_cmd->tvc_sgl_count; i++) + put_page(sg_page(&tv_cmd->tvc_sgl[i])); + + kfree(tv_cmd->tvc_sgl); + } + + kfree(tv_cmd); +} + +/* Dequeue a command from the completion list */ +static struct tcm_vhost_cmd *vhost_scsi_get_cmd_from_completion( + struct vhost_scsi *vs) +{ + struct tcm_vhost_cmd *tv_cmd = NULL; + + spin_lock_bh(&vs->vs_completion_lock); + if (list_empty(&vs->vs_completion_list)) { + spin_unlock_bh(&vs->vs_completion_lock); + return NULL; + } + + list_for_each_entry(tv_cmd, &vs->vs_completion_list, + tvc_completion_list) { + list_del(&tv_cmd->tvc_completion_list); + break; + } + spin_unlock_bh(&vs->vs_completion_lock); + return tv_cmd; +} + +/* Fill in status and signal that we are done processing this command + * + * This is scheduled in the vhost work queue so we are called with the owner + * process mm and can access the vring. + */ +static void vhost_scsi_complete_cmd_work(struct vhost_work *work) +{ + struct vhost_scsi *vs = container_of(work, struct vhost_scsi, + vs_completion_work); + struct tcm_vhost_cmd *tv_cmd; + + while ((tv_cmd = vhost_scsi_get_cmd_from_completion(vs))) { + struct virtio_scsi_cmd_resp v_rsp; + struct se_cmd *se_cmd = &tv_cmd->tvc_se_cmd; + int ret; + + pr_debug("%s tv_cmd %p resid %u status %#02x\n", __func__, + tv_cmd, se_cmd->residual_count, se_cmd->scsi_status); + + memset(&v_rsp, 0, sizeof(v_rsp)); + v_rsp.resid = se_cmd->residual_count; + /* TODO is status_qualifier field needed? */ + v_rsp.status = se_cmd->scsi_status; + v_rsp.sense_len = se_cmd->scsi_sense_length; + memcpy(v_rsp.sense, tv_cmd->tvc_sense_buf, + v_rsp.sense_len); + ret = copy_to_user(tv_cmd->tvc_resp, &v_rsp, sizeof(v_rsp)); + if (likely(ret == 0)) + vhost_add_used(&vs->vqs[2], tv_cmd->tvc_vq_desc, 0); + else + pr_err("Faulted on virtio_scsi_cmd_resp\n"); + + vhost_scsi_free_cmd(tv_cmd); + } + + vhost_signal(&vs->dev, &vs->vqs[2]); +} + +static struct tcm_vhost_cmd *vhost_scsi_allocate_cmd( + struct tcm_vhost_tpg *tv_tpg, + struct virtio_scsi_cmd_req *v_req, + u32 exp_data_len, + int data_direction) +{ + struct tcm_vhost_cmd *tv_cmd; + struct tcm_vhost_nexus *tv_nexus; + struct se_portal_group *se_tpg = &tv_tpg->se_tpg; + struct se_session *se_sess; + struct se_cmd *se_cmd; + int sam_task_attr; + + tv_nexus = tv_tpg->tpg_nexus; + if (!tv_nexus) { + pr_err("Unable to locate active struct tcm_vhost_nexus\n"); + return ERR_PTR(-EIO); + } + se_sess = tv_nexus->tvn_se_sess; + + tv_cmd = kzalloc(sizeof(struct tcm_vhost_cmd), GFP_ATOMIC); + if (!tv_cmd) { + pr_err("Unable to allocate struct tcm_vhost_cmd\n"); + return ERR_PTR(-ENOMEM); + } + INIT_LIST_HEAD(&tv_cmd->tvc_completion_list); + tv_cmd->tvc_tag = v_req->tag; + + se_cmd = &tv_cmd->tvc_se_cmd; + /* + * Locate the SAM Task Attr from virtio_scsi_cmd_req + */ + sam_task_attr = v_req->task_attr; + /* + * Initialize struct se_cmd descriptor from TCM infrastructure + */ + transport_init_se_cmd(se_cmd, se_tpg->se_tpg_tfo, se_sess, exp_data_len, + data_direction, sam_task_attr, + &tv_cmd->tvc_sense_buf[0]); + +#if 0 /* FIXME: vhost_scsi_allocate_cmd() BIDI operation */ + if (bidi) + se_cmd->se_cmd_flags |= SCF_BIDI; +#endif + return tv_cmd; +} + +/* + * Map a user memory range into a scatterlist + * + * Returns the number of scatterlist entries used or -errno on error. + */ +static int vhost_scsi_map_to_sgl(struct scatterlist *sgl, + unsigned int sgl_count, void __user *ptr, size_t len, int write) +{ + struct scatterlist *sg = sgl; + unsigned int npages = 0; + int ret; + + while (len > 0) { + struct page *page; + unsigned int offset = (uintptr_t)ptr & ~PAGE_MASK; + unsigned int nbytes = min_t(unsigned int, + PAGE_SIZE - offset, len); + + if (npages == sgl_count) { + ret = -ENOBUFS; + goto err; + } + + ret = get_user_pages_fast((unsigned long)ptr, 1, write, &page); + BUG_ON(ret == 0); /* we should either get our page or fail */ + if (ret < 0) + goto err; + + sg_set_page(sg, page, nbytes, offset); + ptr += nbytes; + len -= nbytes; + sg++; + npages++; + } + return npages; + +err: + /* Put pages that we hold */ + for (sg = sgl; sg != &sgl[npages]; sg++) + put_page(sg_page(sg)); + return ret; +} + +static int vhost_scsi_map_iov_to_sgl(struct tcm_vhost_cmd *tv_cmd, + struct iovec *iov, unsigned int niov, int write) +{ + int ret; + unsigned int i; + u32 sgl_count; + struct scatterlist *sg; + + /* + * Find out how long sglist needs to be + */ + sgl_count = 0; + for (i = 0; i < niov; i++) { + sgl_count += (((uintptr_t)iov[i].iov_base + iov[i].iov_len + + PAGE_SIZE - 1) >> PAGE_SHIFT) - + ((uintptr_t)iov[i].iov_base >> PAGE_SHIFT); + } + /* TODO overflow checking */ + + sg = kmalloc(sizeof(tv_cmd->tvc_sgl[0]) * sgl_count, GFP_ATOMIC); + if (!sg) + return -ENOMEM; + pr_debug("%s sg %p sgl_count %u is_err %d\n", __func__, + sg, sgl_count, !sg); + sg_init_table(sg, sgl_count); + + tv_cmd->tvc_sgl = sg; + tv_cmd->tvc_sgl_count = sgl_count; + + pr_debug("Mapping %u iovecs for %u pages\n", niov, sgl_count); + for (i = 0; i < niov; i++) { + ret = vhost_scsi_map_to_sgl(sg, sgl_count, iov[i].iov_base, + iov[i].iov_len, write); + if (ret < 0) { + for (i = 0; i < tv_cmd->tvc_sgl_count; i++) + put_page(sg_page(&tv_cmd->tvc_sgl[i])); + kfree(tv_cmd->tvc_sgl); + tv_cmd->tvc_sgl = NULL; + tv_cmd->tvc_sgl_count = 0; + return ret; + } + + sg += ret; + sgl_count -= ret; + } + return 0; +} + +static void tcm_vhost_submission_work(struct work_struct *work) +{ + struct tcm_vhost_cmd *tv_cmd = + container_of(work, struct tcm_vhost_cmd, work); + struct se_cmd *se_cmd = &tv_cmd->tvc_se_cmd; + struct scatterlist *sg_ptr, *sg_bidi_ptr = NULL; + int rc, sg_no_bidi = 0; + /* + * Locate the struct se_lun pointer based on v_req->lun, and + * attach it to struct se_cmd + */ + rc = transport_lookup_cmd_lun(&tv_cmd->tvc_se_cmd, tv_cmd->tvc_lun); + if (rc < 0) { + pr_err("Failed to look up lun: %d\n", tv_cmd->tvc_lun); + transport_send_check_condition_and_sense(&tv_cmd->tvc_se_cmd, + tv_cmd->tvc_se_cmd.scsi_sense_reason, 0); + transport_generic_free_cmd(se_cmd, 0); + return; + } + + rc = target_setup_cmd_from_cdb(se_cmd, tv_cmd->tvc_cdb); + if (rc == -ENOMEM) { + transport_send_check_condition_and_sense(se_cmd, + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, 0); + transport_generic_free_cmd(se_cmd, 0); + return; + } else if (rc < 0) { + if (se_cmd->se_cmd_flags & SCF_SCSI_RESERVATION_CONFLICT) + tcm_vhost_queue_status(se_cmd); + else + transport_send_check_condition_and_sense(se_cmd, + se_cmd->scsi_sense_reason, 0); + transport_generic_free_cmd(se_cmd, 0); + return; + } + + if (tv_cmd->tvc_sgl_count) { + sg_ptr = tv_cmd->tvc_sgl; + /* + * For BIDI commands, pass in the extra READ buffer + * to transport_generic_map_mem_to_cmd() below.. + */ +/* FIXME: Fix BIDI operation in tcm_vhost_submission_work() */ +#if 0 + if (se_cmd->se_cmd_flags & SCF_BIDI) { + sg_bidi_ptr = NULL; + sg_no_bidi = 0; + } +#endif + } else { + sg_ptr = NULL; + } + + rc = transport_generic_map_mem_to_cmd(se_cmd, sg_ptr, + tv_cmd->tvc_sgl_count, sg_bidi_ptr, + sg_no_bidi); + if (rc < 0) { + transport_send_check_condition_and_sense(se_cmd, + se_cmd->scsi_sense_reason, 0); + transport_generic_free_cmd(se_cmd, 0); + return; + } + transport_handle_cdb_direct(se_cmd); +} + +static void vhost_scsi_handle_vq(struct vhost_scsi *vs) +{ + struct vhost_virtqueue *vq = &vs->vqs[2]; + struct virtio_scsi_cmd_req v_req; + struct tcm_vhost_tpg *tv_tpg; + struct tcm_vhost_cmd *tv_cmd; + u32 exp_data_len, data_first, data_num, data_direction; + unsigned out, in, i; + int head, ret; + + /* Must use ioctl VHOST_SCSI_SET_ENDPOINT */ + tv_tpg = vs->vs_tpg; + if (unlikely(!tv_tpg)) { + pr_err("%s endpoint not set\n", __func__); + return; + } + + mutex_lock(&vq->mutex); + vhost_disable_notify(&vs->dev, vq); + + for (;;) { + head = vhost_get_vq_desc(&vs->dev, vq, vq->iov, + ARRAY_SIZE(vq->iov), &out, &in, + NULL, NULL); + pr_debug("vhost_get_vq_desc: head: %d, out: %u in: %u\n", + head, out, in); + /* On error, stop handling until the next kick. */ + if (unlikely(head < 0)) + break; + /* Nothing new? Wait for eventfd to tell us they refilled. */ + if (head == vq->num) { + if (unlikely(vhost_enable_notify(&vs->dev, vq))) { + vhost_disable_notify(&vs->dev, vq); + continue; + } + break; + } + +/* FIXME: BIDI operation */ + if (out == 1 && in == 1) { + data_direction = DMA_NONE; + data_first = 0; + data_num = 0; + } else if (out == 1 && in > 1) { + data_direction = DMA_FROM_DEVICE; + data_first = out + 1; + data_num = in - 1; + } else if (out > 1 && in == 1) { + data_direction = DMA_TO_DEVICE; + data_first = 1; + data_num = out - 1; + } else { + vq_err(vq, "Invalid buffer layout out: %u in: %u\n", + out, in); + break; + } + + /* + * Check for a sane resp buffer so we can report errors to + * the guest. + */ + if (unlikely(vq->iov[out].iov_len != + sizeof(struct virtio_scsi_cmd_resp))) { + vq_err(vq, "Expecting virtio_scsi_cmd_resp, got %zu" + " bytes\n", vq->iov[out].iov_len); + break; + } + + if (unlikely(vq->iov[0].iov_len != sizeof(v_req))) { + vq_err(vq, "Expecting virtio_scsi_cmd_req, got %zu" + " bytes\n", vq->iov[0].iov_len); + break; + } + pr_debug("Calling __copy_from_user: vq->iov[0].iov_base: %p," + " len: %zu\n", vq->iov[0].iov_base, sizeof(v_req)); + ret = __copy_from_user(&v_req, vq->iov[0].iov_base, + sizeof(v_req)); + if (unlikely(ret)) { + vq_err(vq, "Faulted on virtio_scsi_cmd_req\n"); + break; + } + + exp_data_len = 0; + for (i = 0; i < data_num; i++) + exp_data_len += vq->iov[data_first + i].iov_len; + + tv_cmd = vhost_scsi_allocate_cmd(tv_tpg, &v_req, + exp_data_len, data_direction); + if (IS_ERR(tv_cmd)) { + vq_err(vq, "vhost_scsi_allocate_cmd failed %ld\n", + PTR_ERR(tv_cmd)); + break; + } + pr_debug("Allocated tv_cmd: %p exp_data_len: %d, data_direction" + ": %d\n", tv_cmd, exp_data_len, data_direction); + + tv_cmd->tvc_vhost = vs; + + if (unlikely(vq->iov[out].iov_len != + sizeof(struct virtio_scsi_cmd_resp))) { + vq_err(vq, "Expecting virtio_scsi_cmd_resp, got %zu" + " bytes, out: %d, in: %d\n", + vq->iov[out].iov_len, out, in); + break; + } + + tv_cmd->tvc_resp = vq->iov[out].iov_base; + + /* + * Copy in the recieved CDB descriptor into tv_cmd->tvc_cdb + * that will be used by tcm_vhost_new_cmd_map() and down into + * target_setup_cmd_from_cdb() + */ + memcpy(tv_cmd->tvc_cdb, v_req.cdb, TCM_VHOST_MAX_CDB_SIZE); + /* + * Check that the recieved CDB size does not exceeded our + * hardcoded max for tcm_vhost + */ + /* TODO what if cdb was too small for varlen cdb header? */ + if (unlikely(scsi_command_size(tv_cmd->tvc_cdb) > + TCM_VHOST_MAX_CDB_SIZE)) { + vq_err(vq, "Received SCSI CDB with command_size: %d that" + " exceeds SCSI_MAX_VARLEN_CDB_SIZE: %d\n", + scsi_command_size(tv_cmd->tvc_cdb), + TCM_VHOST_MAX_CDB_SIZE); + break; /* TODO */ + } + tv_cmd->tvc_lun = ((v_req.lun[2] << 8) | v_req.lun[3]) & 0x3FFF; + + pr_debug("vhost_scsi got command opcode: %#02x, lun: %d\n", + tv_cmd->tvc_cdb[0], tv_cmd->tvc_lun); + + if (data_direction != DMA_NONE) { + ret = vhost_scsi_map_iov_to_sgl(tv_cmd, + &vq->iov[data_first], data_num, + data_direction == DMA_TO_DEVICE); + if (unlikely(ret)) { + vq_err(vq, "Failed to map iov to sgl\n"); + break; /* TODO */ + } + } + + /* + * Save the descriptor from vhost_get_vq_desc() to be used to + * complete the virtio-scsi request in TCM callback context via + * tcm_vhost_queue_data_in() and tcm_vhost_queue_status() + */ + tv_cmd->tvc_vq_desc = head; + /* + * Dispatch tv_cmd descriptor for cmwq execution in process + * context provided by tcm_vhost_workqueue. This also ensures + * tv_cmd is executed on the same kworker CPU as this vhost + * thread to gain positive L2 cache locality effects.. + */ + INIT_WORK(&tv_cmd->work, tcm_vhost_submission_work); + queue_work(tcm_vhost_workqueue, &tv_cmd->work); + } + + mutex_unlock(&vq->mutex); +} + +static void vhost_scsi_ctl_handle_kick(struct vhost_work *work) +{ + pr_debug("%s: The handling func for control queue.\n", __func__); +} + +static void vhost_scsi_evt_handle_kick(struct vhost_work *work) +{ + pr_debug("%s: The handling func for event queue.\n", __func__); +} + +static void vhost_scsi_handle_kick(struct vhost_work *work) +{ + struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue, + poll.work); + struct vhost_scsi *vs = container_of(vq->dev, struct vhost_scsi, dev); + + vhost_scsi_handle_vq(vs); +} + +/* + * Called from vhost_scsi_ioctl() context to walk the list of available + * tcm_vhost_tpg with an active struct tcm_vhost_nexus + */ +static int vhost_scsi_set_endpoint( + struct vhost_scsi *vs, + struct vhost_scsi_target *t) +{ + struct tcm_vhost_tport *tv_tport; + struct tcm_vhost_tpg *tv_tpg; + int index; + + mutex_lock(&vs->dev.mutex); + /* Verify that ring has been setup correctly. */ + for (index = 0; index < vs->dev.nvqs; ++index) { + /* Verify that ring has been setup correctly. */ + if (!vhost_vq_access_ok(&vs->vqs[index])) { + mutex_unlock(&vs->dev.mutex); + return -EFAULT; + } + } + mutex_unlock(&vs->dev.mutex); + + mutex_lock(&tcm_vhost_mutex); + list_for_each_entry(tv_tpg, &tcm_vhost_list, tv_tpg_list) { + mutex_lock(&tv_tpg->tv_tpg_mutex); + if (!tv_tpg->tpg_nexus) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + continue; + } + if (tv_tpg->tv_tpg_vhost_count != 0) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + continue; + } + tv_tport = tv_tpg->tport; + + if (!strcmp(tv_tport->tport_name, t->vhost_wwpn) && + (tv_tpg->tport_tpgt == t->vhost_tpgt)) { + tv_tpg->tv_tpg_vhost_count++; + mutex_unlock(&tv_tpg->tv_tpg_mutex); + mutex_unlock(&tcm_vhost_mutex); + + mutex_lock(&vs->dev.mutex); + if (vs->vs_tpg) { + mutex_unlock(&vs->dev.mutex); + mutex_lock(&tv_tpg->tv_tpg_mutex); + tv_tpg->tv_tpg_vhost_count--; + mutex_unlock(&tv_tpg->tv_tpg_mutex); + return -EEXIST; + } + + vs->vs_tpg = tv_tpg; + smp_mb__after_atomic_inc(); + mutex_unlock(&vs->dev.mutex); + return 0; + } + mutex_unlock(&tv_tpg->tv_tpg_mutex); + } + mutex_unlock(&tcm_vhost_mutex); + return -EINVAL; +} + +static int vhost_scsi_clear_endpoint( + struct vhost_scsi *vs, + struct vhost_scsi_target *t) +{ + struct tcm_vhost_tport *tv_tport; + struct tcm_vhost_tpg *tv_tpg; + int index, ret; + + mutex_lock(&vs->dev.mutex); + /* Verify that ring has been setup correctly. */ + for (index = 0; index < vs->dev.nvqs; ++index) { + if (!vhost_vq_access_ok(&vs->vqs[index])) { + ret = -EFAULT; + goto err; + } + } + + if (!vs->vs_tpg) { + ret = -ENODEV; + goto err; + } + tv_tpg = vs->vs_tpg; + tv_tport = tv_tpg->tport; + + if (strcmp(tv_tport->tport_name, t->vhost_wwpn) || + (tv_tpg->tport_tpgt != t->vhost_tpgt)) { + pr_warn("tv_tport->tport_name: %s, tv_tpg->tport_tpgt: %hu" + " does not match t->vhost_wwpn: %s, t->vhost_tpgt: %hu\n", + tv_tport->tport_name, tv_tpg->tport_tpgt, + t->vhost_wwpn, t->vhost_tpgt); + ret = -EINVAL; + goto err; + } + tv_tpg->tv_tpg_vhost_count--; + vs->vs_tpg = NULL; + mutex_unlock(&vs->dev.mutex); + + return 0; + +err: + mutex_unlock(&vs->dev.mutex); + return ret; +} + +static int vhost_scsi_open(struct inode *inode, struct file *f) +{ + struct vhost_scsi *s; + int r; + + s = kzalloc(sizeof(*s), GFP_KERNEL); + if (!s) + return -ENOMEM; + + vhost_work_init(&s->vs_completion_work, vhost_scsi_complete_cmd_work); + INIT_LIST_HEAD(&s->vs_completion_list); + spin_lock_init(&s->vs_completion_lock); + + s->vqs[VHOST_SCSI_VQ_CTL].handle_kick = vhost_scsi_ctl_handle_kick; + s->vqs[VHOST_SCSI_VQ_EVT].handle_kick = vhost_scsi_evt_handle_kick; + s->vqs[VHOST_SCSI_VQ_IO].handle_kick = vhost_scsi_handle_kick; + r = vhost_dev_init(&s->dev, s->vqs, 3); + if (r < 0) { + kfree(s); + return r; + } + + f->private_data = s; + return 0; +} + +static int vhost_scsi_release(struct inode *inode, struct file *f) +{ + struct vhost_scsi *s = f->private_data; + + if (s->vs_tpg && s->vs_tpg->tport) { + struct vhost_scsi_target backend; + + memcpy(backend.vhost_wwpn, s->vs_tpg->tport->tport_name, + sizeof(backend.vhost_wwpn)); + backend.vhost_tpgt = s->vs_tpg->tport_tpgt; + vhost_scsi_clear_endpoint(s, &backend); + } + + vhost_dev_cleanup(&s->dev, false); + kfree(s); + return 0; +} + +static void vhost_scsi_flush_vq(struct vhost_scsi *vs, int index) +{ + vhost_poll_flush(&vs->dev.vqs[index].poll); +} + +static void vhost_scsi_flush(struct vhost_scsi *vs) +{ + vhost_scsi_flush_vq(vs, VHOST_SCSI_VQ_CTL); + vhost_scsi_flush_vq(vs, VHOST_SCSI_VQ_EVT); + vhost_scsi_flush_vq(vs, VHOST_SCSI_VQ_IO); +} + +static int vhost_scsi_set_features(struct vhost_scsi *vs, u64 features) +{ + if (features & ~VHOST_FEATURES) + return -EOPNOTSUPP; + + mutex_lock(&vs->dev.mutex); + if ((features & (1 << VHOST_F_LOG_ALL)) && + !vhost_log_access_ok(&vs->dev)) { + mutex_unlock(&vs->dev.mutex); + return -EFAULT; + } + vs->dev.acked_features = features; + smp_wmb(); + vhost_scsi_flush(vs); + mutex_unlock(&vs->dev.mutex); + return 0; +} + +static long vhost_scsi_ioctl(struct file *f, unsigned int ioctl, + unsigned long arg) +{ + struct vhost_scsi *vs = f->private_data; + struct vhost_scsi_target backend; + void __user *argp = (void __user *)arg; + u64 __user *featurep = argp; + u64 features; + int r, abi_version = VHOST_SCSI_ABI_VERSION; + + switch (ioctl) { + case VHOST_SCSI_SET_ENDPOINT: + if (copy_from_user(&backend, argp, sizeof backend)) + return -EFAULT; + if (backend.reserved != 0) + return -EOPNOTSUPP; + + return vhost_scsi_set_endpoint(vs, &backend); + case VHOST_SCSI_CLEAR_ENDPOINT: + if (copy_from_user(&backend, argp, sizeof backend)) + return -EFAULT; + if (backend.reserved != 0) + return -EOPNOTSUPP; + + return vhost_scsi_clear_endpoint(vs, &backend); + case VHOST_SCSI_GET_ABI_VERSION: + if (copy_to_user(argp, &abi_version, sizeof abi_version)) + return -EFAULT; + return 0; + case VHOST_GET_FEATURES: + features = VHOST_FEATURES; + if (copy_to_user(featurep, &features, sizeof features)) + return -EFAULT; + return 0; + case VHOST_SET_FEATURES: + if (copy_from_user(&features, featurep, sizeof features)) + return -EFAULT; + return vhost_scsi_set_features(vs, features); + default: + mutex_lock(&vs->dev.mutex); + r = vhost_dev_ioctl(&vs->dev, ioctl, arg); + mutex_unlock(&vs->dev.mutex); + return r; + } +} + +#ifdef CONFIG_COMPAT +static long vhost_scsi_compat_ioctl(struct file *f, unsigned int ioctl, + unsigned long arg) +{ + return vhost_scsi_ioctl(f, ioctl, (unsigned long)compat_ptr(arg)); +} +#endif + +static const struct file_operations vhost_scsi_fops = { + .owner = THIS_MODULE, + .release = vhost_scsi_release, + .unlocked_ioctl = vhost_scsi_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = vhost_scsi_compat_ioctl, +#endif + .open = vhost_scsi_open, + .llseek = noop_llseek, +}; + +static struct miscdevice vhost_scsi_misc = { + MISC_DYNAMIC_MINOR, + "vhost-scsi", + &vhost_scsi_fops, +}; + +static int __init vhost_scsi_register(void) +{ + return misc_register(&vhost_scsi_misc); +} + +static int vhost_scsi_deregister(void) +{ + return misc_deregister(&vhost_scsi_misc); +} + +static char *tcm_vhost_dump_proto_id(struct tcm_vhost_tport *tport) +{ + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + return "SAS"; + case SCSI_PROTOCOL_FCP: + return "FCP"; + case SCSI_PROTOCOL_ISCSI: + return "iSCSI"; + default: + break; + } + + return "Unknown"; +} + +static int tcm_vhost_port_link(struct se_portal_group *se_tpg, + struct se_lun *lun) +{ + struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + + mutex_lock(&tv_tpg->tv_tpg_mutex); + tv_tpg->tv_tpg_port_count++; + mutex_unlock(&tv_tpg->tv_tpg_mutex); + + return 0; +} + +static void tcm_vhost_port_unlink(struct se_portal_group *se_tpg, + struct se_lun *se_lun) +{ + struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + + mutex_lock(&tv_tpg->tv_tpg_mutex); + tv_tpg->tv_tpg_port_count--; + mutex_unlock(&tv_tpg->tv_tpg_mutex); +} + +static struct se_node_acl *tcm_vhost_make_nodeacl( + struct se_portal_group *se_tpg, + struct config_group *group, + const char *name) +{ + struct se_node_acl *se_nacl, *se_nacl_new; + struct tcm_vhost_nacl *nacl; + u64 wwpn = 0; + u32 nexus_depth; + + /* tcm_vhost_parse_wwn(name, &wwpn, 1) < 0) + return ERR_PTR(-EINVAL); */ + se_nacl_new = tcm_vhost_alloc_fabric_acl(se_tpg); + if (!se_nacl_new) + return ERR_PTR(-ENOMEM); + + nexus_depth = 1; + /* + * se_nacl_new may be released by core_tpg_add_initiator_node_acl() + * when converting a NodeACL from demo mode -> explict + */ + se_nacl = core_tpg_add_initiator_node_acl(se_tpg, se_nacl_new, + name, nexus_depth); + if (IS_ERR(se_nacl)) { + tcm_vhost_release_fabric_acl(se_tpg, se_nacl_new); + return se_nacl; + } + /* + * Locate our struct tcm_vhost_nacl and set the FC Nport WWPN + */ + nacl = container_of(se_nacl, struct tcm_vhost_nacl, se_node_acl); + nacl->iport_wwpn = wwpn; + + return se_nacl; +} + +static void tcm_vhost_drop_nodeacl(struct se_node_acl *se_acl) +{ + struct tcm_vhost_nacl *nacl = container_of(se_acl, + struct tcm_vhost_nacl, se_node_acl); + core_tpg_del_initiator_node_acl(se_acl->se_tpg, se_acl, 1); + kfree(nacl); +} + +static int tcm_vhost_make_nexus(struct tcm_vhost_tpg *tv_tpg, + const char *name) +{ + struct se_portal_group *se_tpg; + struct tcm_vhost_nexus *tv_nexus; + + mutex_lock(&tv_tpg->tv_tpg_mutex); + if (tv_tpg->tpg_nexus) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + pr_debug("tv_tpg->tpg_nexus already exists\n"); + return -EEXIST; + } + se_tpg = &tv_tpg->se_tpg; + + tv_nexus = kzalloc(sizeof(struct tcm_vhost_nexus), GFP_KERNEL); + if (!tv_nexus) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + pr_err("Unable to allocate struct tcm_vhost_nexus\n"); + return -ENOMEM; + } + /* + * Initialize the struct se_session pointer + */ + tv_nexus->tvn_se_sess = transport_init_session(); + if (IS_ERR(tv_nexus->tvn_se_sess)) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + kfree(tv_nexus); + return -ENOMEM; + } + /* + * Since we are running in 'demo mode' this call with generate a + * struct se_node_acl for the tcm_vhost struct se_portal_group with + * the SCSI Initiator port name of the passed configfs group 'name'. + */ + tv_nexus->tvn_se_sess->se_node_acl = core_tpg_check_initiator_node_acl( + se_tpg, (unsigned char *)name); + if (!tv_nexus->tvn_se_sess->se_node_acl) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + pr_debug("core_tpg_check_initiator_node_acl() failed" + " for %s\n", name); + transport_free_session(tv_nexus->tvn_se_sess); + kfree(tv_nexus); + return -ENOMEM; + } + /* + * Now register the TCM vhost virtual I_T Nexus as active with the + * call to __transport_register_session() + */ + __transport_register_session(se_tpg, tv_nexus->tvn_se_sess->se_node_acl, + tv_nexus->tvn_se_sess, tv_nexus); + tv_tpg->tpg_nexus = tv_nexus; + + mutex_unlock(&tv_tpg->tv_tpg_mutex); + return 0; +} + +static int tcm_vhost_drop_nexus(struct tcm_vhost_tpg *tpg) +{ + struct se_session *se_sess; + struct tcm_vhost_nexus *tv_nexus; + + mutex_lock(&tpg->tv_tpg_mutex); + tv_nexus = tpg->tpg_nexus; + if (!tv_nexus) { + mutex_unlock(&tpg->tv_tpg_mutex); + return -ENODEV; + } + + se_sess = tv_nexus->tvn_se_sess; + if (!se_sess) { + mutex_unlock(&tpg->tv_tpg_mutex); + return -ENODEV; + } + + if (tpg->tv_tpg_port_count != 0) { + mutex_unlock(&tpg->tv_tpg_mutex); + pr_err("Unable to remove TCM_vhost I_T Nexus with" + " active TPG port count: %d\n", + tpg->tv_tpg_port_count); + return -EBUSY; + } + + if (tpg->tv_tpg_vhost_count != 0) { + mutex_unlock(&tpg->tv_tpg_mutex); + pr_err("Unable to remove TCM_vhost I_T Nexus with" + " active TPG vhost count: %d\n", + tpg->tv_tpg_vhost_count); + return -EBUSY; + } + + pr_debug("TCM_vhost_ConfigFS: Removing I_T Nexus to emulated" + " %s Initiator Port: %s\n", tcm_vhost_dump_proto_id(tpg->tport), + tv_nexus->tvn_se_sess->se_node_acl->initiatorname); + /* + * Release the SCSI I_T Nexus to the emulated vhost Target Port + */ + transport_deregister_session(tv_nexus->tvn_se_sess); + tpg->tpg_nexus = NULL; + mutex_unlock(&tpg->tv_tpg_mutex); + + kfree(tv_nexus); + return 0; +} + +static ssize_t tcm_vhost_tpg_show_nexus(struct se_portal_group *se_tpg, + char *page) +{ + struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_nexus *tv_nexus; + ssize_t ret; + + mutex_lock(&tv_tpg->tv_tpg_mutex); + tv_nexus = tv_tpg->tpg_nexus; + if (!tv_nexus) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + return -ENODEV; + } + ret = snprintf(page, PAGE_SIZE, "%s\n", + tv_nexus->tvn_se_sess->se_node_acl->initiatorname); + mutex_unlock(&tv_tpg->tv_tpg_mutex); + + return ret; +} + +static ssize_t tcm_vhost_tpg_store_nexus(struct se_portal_group *se_tpg, + const char *page, + size_t count) +{ + struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_tport *tport_wwn = tv_tpg->tport; + unsigned char i_port[TCM_VHOST_NAMELEN], *ptr, *port_ptr; + int ret; + /* + * Shutdown the active I_T nexus if 'NULL' is passed.. + */ + if (!strncmp(page, "NULL", 4)) { + ret = tcm_vhost_drop_nexus(tv_tpg); + return (!ret) ? count : ret; + } + /* + * Otherwise make sure the passed virtual Initiator port WWN matches + * the fabric protocol_id set in tcm_vhost_make_tport(), and call + * tcm_vhost_make_nexus(). + */ + if (strlen(page) >= TCM_VHOST_NAMELEN) { + pr_err("Emulated NAA Sas Address: %s, exceeds" + " max: %d\n", page, TCM_VHOST_NAMELEN); + return -EINVAL; + } + snprintf(&i_port[0], TCM_VHOST_NAMELEN, "%s", page); + + ptr = strstr(i_port, "naa."); + if (ptr) { + if (tport_wwn->tport_proto_id != SCSI_PROTOCOL_SAS) { + pr_err("Passed SAS Initiator Port %s does not" + " match target port protoid: %s\n", i_port, + tcm_vhost_dump_proto_id(tport_wwn)); + return -EINVAL; + } + port_ptr = &i_port[0]; + goto check_newline; + } + ptr = strstr(i_port, "fc."); + if (ptr) { + if (tport_wwn->tport_proto_id != SCSI_PROTOCOL_FCP) { + pr_err("Passed FCP Initiator Port %s does not" + " match target port protoid: %s\n", i_port, + tcm_vhost_dump_proto_id(tport_wwn)); + return -EINVAL; + } + port_ptr = &i_port[3]; /* Skip over "fc." */ + goto check_newline; + } + ptr = strstr(i_port, "iqn."); + if (ptr) { + if (tport_wwn->tport_proto_id != SCSI_PROTOCOL_ISCSI) { + pr_err("Passed iSCSI Initiator Port %s does not" + " match target port protoid: %s\n", i_port, + tcm_vhost_dump_proto_id(tport_wwn)); + return -EINVAL; + } + port_ptr = &i_port[0]; + goto check_newline; + } + pr_err("Unable to locate prefix for emulated Initiator Port:" + " %s\n", i_port); + return -EINVAL; + /* + * Clear any trailing newline for the NAA WWN + */ +check_newline: + if (i_port[strlen(i_port)-1] == '\n') + i_port[strlen(i_port)-1] = '\0'; + + ret = tcm_vhost_make_nexus(tv_tpg, port_ptr); + if (ret < 0) + return ret; + + return count; +} + +TF_TPG_BASE_ATTR(tcm_vhost, nexus, S_IRUGO | S_IWUSR); + +static struct configfs_attribute *tcm_vhost_tpg_attrs[] = { + &tcm_vhost_tpg_nexus.attr, + NULL, +}; + +static struct se_portal_group *tcm_vhost_make_tpg(struct se_wwn *wwn, + struct config_group *group, + const char *name) +{ + struct tcm_vhost_tport *tport = container_of(wwn, + struct tcm_vhost_tport, tport_wwn); + + struct tcm_vhost_tpg *tpg; + unsigned long tpgt; + int ret; + + if (strstr(name, "tpgt_") != name) + return ERR_PTR(-EINVAL); + if (kstrtoul(name + 5, 10, &tpgt) || tpgt > UINT_MAX) + return ERR_PTR(-EINVAL); + + tpg = kzalloc(sizeof(struct tcm_vhost_tpg), GFP_KERNEL); + if (!tpg) { + pr_err("Unable to allocate struct tcm_vhost_tpg"); + return ERR_PTR(-ENOMEM); + } + mutex_init(&tpg->tv_tpg_mutex); + INIT_LIST_HEAD(&tpg->tv_tpg_list); + tpg->tport = tport; + tpg->tport_tpgt = tpgt; + + ret = core_tpg_register(&tcm_vhost_fabric_configfs->tf_ops, wwn, + &tpg->se_tpg, tpg, TRANSPORT_TPG_TYPE_NORMAL); + if (ret < 0) { + kfree(tpg); + return NULL; + } + mutex_lock(&tcm_vhost_mutex); + list_add_tail(&tpg->tv_tpg_list, &tcm_vhost_list); + mutex_unlock(&tcm_vhost_mutex); + + return &tpg->se_tpg; +} + +static void tcm_vhost_drop_tpg(struct se_portal_group *se_tpg) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + + mutex_lock(&tcm_vhost_mutex); + list_del(&tpg->tv_tpg_list); + mutex_unlock(&tcm_vhost_mutex); + /* + * Release the virtual I_T Nexus for this vhost TPG + */ + tcm_vhost_drop_nexus(tpg); + /* + * Deregister the se_tpg from TCM.. + */ + core_tpg_deregister(se_tpg); + kfree(tpg); +} + +static struct se_wwn *tcm_vhost_make_tport(struct target_fabric_configfs *tf, + struct config_group *group, + const char *name) +{ + struct tcm_vhost_tport *tport; + char *ptr; + u64 wwpn = 0; + int off = 0; + + /* if (tcm_vhost_parse_wwn(name, &wwpn, 1) < 0) + return ERR_PTR(-EINVAL); */ + + tport = kzalloc(sizeof(struct tcm_vhost_tport), GFP_KERNEL); + if (!tport) { + pr_err("Unable to allocate struct tcm_vhost_tport"); + return ERR_PTR(-ENOMEM); + } + tport->tport_wwpn = wwpn; + /* + * Determine the emulated Protocol Identifier and Target Port Name + * based on the incoming configfs directory name. + */ + ptr = strstr(name, "naa."); + if (ptr) { + tport->tport_proto_id = SCSI_PROTOCOL_SAS; + goto check_len; + } + ptr = strstr(name, "fc."); + if (ptr) { + tport->tport_proto_id = SCSI_PROTOCOL_FCP; + off = 3; /* Skip over "fc." */ + goto check_len; + } + ptr = strstr(name, "iqn."); + if (ptr) { + tport->tport_proto_id = SCSI_PROTOCOL_ISCSI; + goto check_len; + } + + pr_err("Unable to locate prefix for emulated Target Port:" + " %s\n", name); + kfree(tport); + return ERR_PTR(-EINVAL); + +check_len: + if (strlen(name) >= TCM_VHOST_NAMELEN) { + pr_err("Emulated %s Address: %s, exceeds" + " max: %d\n", name, tcm_vhost_dump_proto_id(tport), + TCM_VHOST_NAMELEN); + kfree(tport); + return ERR_PTR(-EINVAL); + } + snprintf(&tport->tport_name[0], TCM_VHOST_NAMELEN, "%s", &name[off]); + + pr_debug("TCM_VHost_ConfigFS: Allocated emulated Target" + " %s Address: %s\n", tcm_vhost_dump_proto_id(tport), name); + + return &tport->tport_wwn; +} + +static void tcm_vhost_drop_tport(struct se_wwn *wwn) +{ + struct tcm_vhost_tport *tport = container_of(wwn, + struct tcm_vhost_tport, tport_wwn); + + pr_debug("TCM_VHost_ConfigFS: Deallocating emulated Target" + " %s Address: %s\n", tcm_vhost_dump_proto_id(tport), + tport->tport_name); + + kfree(tport); +} + +static ssize_t tcm_vhost_wwn_show_attr_version( + struct target_fabric_configfs *tf, + char *page) +{ + return sprintf(page, "TCM_VHOST fabric module %s on %s/%s" + "on "UTS_RELEASE"\n", TCM_VHOST_VERSION, utsname()->sysname, + utsname()->machine); +} + +TF_WWN_ATTR_RO(tcm_vhost, version); + +static struct configfs_attribute *tcm_vhost_wwn_attrs[] = { + &tcm_vhost_wwn_version.attr, + NULL, +}; + +static struct target_core_fabric_ops tcm_vhost_ops = { + .get_fabric_name = tcm_vhost_get_fabric_name, + .get_fabric_proto_ident = tcm_vhost_get_fabric_proto_ident, + .tpg_get_wwn = tcm_vhost_get_fabric_wwn, + .tpg_get_tag = tcm_vhost_get_tag, + .tpg_get_default_depth = tcm_vhost_get_default_depth, + .tpg_get_pr_transport_id = tcm_vhost_get_pr_transport_id, + .tpg_get_pr_transport_id_len = tcm_vhost_get_pr_transport_id_len, + .tpg_parse_pr_out_transport_id = tcm_vhost_parse_pr_out_transport_id, + .tpg_check_demo_mode = tcm_vhost_check_true, + .tpg_check_demo_mode_cache = tcm_vhost_check_true, + .tpg_check_demo_mode_write_protect = tcm_vhost_check_false, + .tpg_check_prod_mode_write_protect = tcm_vhost_check_false, + .tpg_alloc_fabric_acl = tcm_vhost_alloc_fabric_acl, + .tpg_release_fabric_acl = tcm_vhost_release_fabric_acl, + .tpg_get_inst_index = tcm_vhost_tpg_get_inst_index, + .release_cmd = tcm_vhost_release_cmd, + .shutdown_session = tcm_vhost_shutdown_session, + .close_session = tcm_vhost_close_session, + .sess_get_index = tcm_vhost_sess_get_index, + .sess_get_initiator_sid = NULL, + .write_pending = tcm_vhost_write_pending, + .write_pending_status = tcm_vhost_write_pending_status, + .set_default_node_attributes = tcm_vhost_set_default_node_attrs, + .get_task_tag = tcm_vhost_get_task_tag, + .get_cmd_state = tcm_vhost_get_cmd_state, + .queue_data_in = tcm_vhost_queue_data_in, + .queue_status = tcm_vhost_queue_status, + .queue_tm_rsp = tcm_vhost_queue_tm_rsp, + .get_fabric_sense_len = tcm_vhost_get_fabric_sense_len, + .set_fabric_sense_len = tcm_vhost_set_fabric_sense_len, + /* + * Setup callers for generic logic in target_core_fabric_configfs.c + */ + .fabric_make_wwn = tcm_vhost_make_tport, + .fabric_drop_wwn = tcm_vhost_drop_tport, + .fabric_make_tpg = tcm_vhost_make_tpg, + .fabric_drop_tpg = tcm_vhost_drop_tpg, + .fabric_post_link = tcm_vhost_port_link, + .fabric_pre_unlink = tcm_vhost_port_unlink, + .fabric_make_np = NULL, + .fabric_drop_np = NULL, + .fabric_make_nodeacl = tcm_vhost_make_nodeacl, + .fabric_drop_nodeacl = tcm_vhost_drop_nodeacl, +}; + +static int tcm_vhost_register_configfs(void) +{ + struct target_fabric_configfs *fabric; + int ret; + + pr_debug("TCM_VHOST fabric module %s on %s/%s" + " on "UTS_RELEASE"\n", TCM_VHOST_VERSION, utsname()->sysname, + utsname()->machine); + /* + * Register the top level struct config_item_type with TCM core + */ + fabric = target_fabric_configfs_init(THIS_MODULE, "vhost"); + if (IS_ERR(fabric)) { + pr_err("target_fabric_configfs_init() failed\n"); + return PTR_ERR(fabric); + } + /* + * Setup fabric->tf_ops from our local tcm_vhost_ops + */ + fabric->tf_ops = tcm_vhost_ops; + /* + * Setup default attribute lists for various fabric->tf_cit_tmpl + */ + TF_CIT_TMPL(fabric)->tfc_wwn_cit.ct_attrs = tcm_vhost_wwn_attrs; + TF_CIT_TMPL(fabric)->tfc_tpg_base_cit.ct_attrs = tcm_vhost_tpg_attrs; + TF_CIT_TMPL(fabric)->tfc_tpg_attrib_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_param_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_np_base_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_nacl_base_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_nacl_attrib_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_nacl_auth_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_nacl_param_cit.ct_attrs = NULL; + /* + * Register the fabric for use within TCM + */ + ret = target_fabric_configfs_register(fabric); + if (ret < 0) { + pr_err("target_fabric_configfs_register() failed" + " for TCM_VHOST\n"); + return ret; + } + /* + * Setup our local pointer to *fabric + */ + tcm_vhost_fabric_configfs = fabric; + pr_debug("TCM_VHOST[0] - Set fabric -> tcm_vhost_fabric_configfs\n"); + return 0; +}; + +static void tcm_vhost_deregister_configfs(void) +{ + if (!tcm_vhost_fabric_configfs) + return; + + target_fabric_configfs_deregister(tcm_vhost_fabric_configfs); + tcm_vhost_fabric_configfs = NULL; + pr_debug("TCM_VHOST[0] - Cleared tcm_vhost_fabric_configfs\n"); +}; + +static int __init tcm_vhost_init(void) +{ + int ret = -ENOMEM; + /* + * Use our own dedicated workqueue for submitting I/O into + * target core to avoid contention within system_wq. + */ + tcm_vhost_workqueue = alloc_workqueue("tcm_vhost", 0, 0); + if (!tcm_vhost_workqueue) + goto out; + + ret = vhost_scsi_register(); + if (ret < 0) + goto out_destroy_workqueue; + + ret = tcm_vhost_register_configfs(); + if (ret < 0) + goto out_vhost_scsi_deregister; + + return 0; + +out_vhost_scsi_deregister: + vhost_scsi_deregister(); +out_destroy_workqueue: + destroy_workqueue(tcm_vhost_workqueue); +out: + return ret; +}; + +static void tcm_vhost_exit(void) +{ + tcm_vhost_deregister_configfs(); + vhost_scsi_deregister(); + destroy_workqueue(tcm_vhost_workqueue); +}; + +MODULE_DESCRIPTION("TCM_VHOST series fabric driver"); +MODULE_LICENSE("GPL"); +module_init(tcm_vhost_init); +module_exit(tcm_vhost_exit); diff --git a/drivers/vhost/tcm_vhost.h b/drivers/vhost/tcm_vhost.h new file mode 100644 index 0000000000000000000000000000000000000000..d9e93557d669d09b3ab08d1030aa47791184db00 --- /dev/null +++ b/drivers/vhost/tcm_vhost.h @@ -0,0 +1,103 @@ +#define TCM_VHOST_VERSION "v0.1" +#define TCM_VHOST_NAMELEN 256 +#define TCM_VHOST_MAX_CDB_SIZE 32 + +struct tcm_vhost_cmd { + /* Descriptor from vhost_get_vq_desc() for virt_queue segment */ + int tvc_vq_desc; + /* The Tag from include/linux/virtio_scsi.h:struct virtio_scsi_cmd_req */ + u64 tvc_tag; + /* The number of scatterlists associated with this cmd */ + u32 tvc_sgl_count; + /* Saved unpacked SCSI LUN for tcm_vhost_submission_work() */ + u32 tvc_lun; + /* Pointer to the SGL formatted memory from virtio-scsi */ + struct scatterlist *tvc_sgl; + /* Pointer to response */ + struct virtio_scsi_cmd_resp __user *tvc_resp; + /* Pointer to vhost_scsi for our device */ + struct vhost_scsi *tvc_vhost; + /* The TCM I/O descriptor that is accessed via container_of() */ + struct se_cmd tvc_se_cmd; + /* work item used for cmwq dispatch to tcm_vhost_submission_work() */ + struct work_struct work; + /* Copy of the incoming SCSI command descriptor block (CDB) */ + unsigned char tvc_cdb[TCM_VHOST_MAX_CDB_SIZE]; + /* Sense buffer that will be mapped into outgoing status */ + unsigned char tvc_sense_buf[TRANSPORT_SENSE_BUFFER]; + /* Completed commands list, serviced from vhost worker thread */ + struct list_head tvc_completion_list; +}; + +struct tcm_vhost_nexus { + /* Pointer to TCM session for I_T Nexus */ + struct se_session *tvn_se_sess; +}; + +struct tcm_vhost_nacl { + /* Binary World Wide unique Port Name for Vhost Initiator port */ + u64 iport_wwpn; + /* ASCII formatted WWPN for Sas Initiator port */ + char iport_name[TCM_VHOST_NAMELEN]; + /* Returned by tcm_vhost_make_nodeacl() */ + struct se_node_acl se_node_acl; +}; + +struct tcm_vhost_tpg { + /* Vhost port target portal group tag for TCM */ + u16 tport_tpgt; + /* Used to track number of TPG Port/Lun Links wrt to explict I_T Nexus shutdown */ + int tv_tpg_port_count; + /* Used for vhost_scsi device reference to tpg_nexus, protected by tv_tpg_mutex */ + int tv_tpg_vhost_count; + /* list for tcm_vhost_list */ + struct list_head tv_tpg_list; + /* Used to protect access for tpg_nexus */ + struct mutex tv_tpg_mutex; + /* Pointer to the TCM VHost I_T Nexus for this TPG endpoint */ + struct tcm_vhost_nexus *tpg_nexus; + /* Pointer back to tcm_vhost_tport */ + struct tcm_vhost_tport *tport; + /* Returned by tcm_vhost_make_tpg() */ + struct se_portal_group se_tpg; +}; + +struct tcm_vhost_tport { + /* SCSI protocol the tport is providing */ + u8 tport_proto_id; + /* Binary World Wide unique Port Name for Vhost Target port */ + u64 tport_wwpn; + /* ASCII formatted WWPN for Vhost Target port */ + char tport_name[TCM_VHOST_NAMELEN]; + /* Returned by tcm_vhost_make_tport() */ + struct se_wwn tport_wwn; +}; + +/* + * As per request from MST, keep TCM_VHOST related ioctl defines out of + * linux/vhost.h (user-space) for now.. + */ + +#include + +/* + * Used by QEMU userspace to ensure a consistent vhost-scsi ABI. + * + * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate + + * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage + */ + +#define VHOST_SCSI_ABI_VERSION 0 + +struct vhost_scsi_target { + int abi_version; + char vhost_wwpn[TRANSPORT_IQN_LEN]; + unsigned short vhost_tpgt; + unsigned short reserved; +}; + +/* VHOST_SCSI specific defines */ +#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) +#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) +/* Changing this breaks userspace. */ +#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int) diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index b0b2ac335347c7c1c9c311c6569a38139117d823..747442d2c0f69a8207c4ab577ca6a27f21a3d037 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -90,7 +90,8 @@ #undef DEBUG #ifdef DEBUG -#define DBG(fmt, args...) printk(KERN_DEBUG "aty128fb: %s " fmt, __func__, ##args); +#define DBG(fmt, args...) \ + printk(KERN_DEBUG "aty128fb: %s " fmt, __func__, ##args); #else #define DBG(fmt, args...) #endif @@ -449,8 +450,9 @@ static int aty128_decode_var(struct fb_var_screeninfo *var, struct aty128fb_par *par); #if 0 static void __devinit aty128_get_pllinfo(struct aty128fb_par *par, - void __iomem *bios); -static void __devinit __iomem *aty128_map_ROM(struct pci_dev *pdev, const struct aty128fb_par *par); + void __iomem *bios); +static void __devinit __iomem *aty128_map_ROM(struct pci_dev *pdev, + const struct aty128fb_par *par); #endif static void aty128_timings(struct aty128fb_par *par); static void aty128_init_engine(struct aty128fb_par *par); @@ -779,7 +781,8 @@ static u32 depth_to_dst(u32 depth) #ifndef __sparc__ -static void __iomem * __devinit aty128_map_ROM(const struct aty128fb_par *par, struct pci_dev *dev) +static void __iomem * __devinit aty128_map_ROM(const struct aty128fb_par *par, + struct pci_dev *dev) { u16 dptr; u8 rom_type; @@ -811,13 +814,14 @@ static void __iomem * __devinit aty128_map_ROM(const struct aty128fb_par *par, s /* Look for the PCI data to check the ROM type */ dptr = BIOS_IN16(0x18); - /* Check the PCI data signature. If it's wrong, we still assume a normal x86 ROM - * for now, until I've verified this works everywhere. The goal here is more - * to phase out Open Firmware images. + /* Check the PCI data signature. If it's wrong, we still assume a normal + * x86 ROM for now, until I've verified this works everywhere. + * The goal here is more to phase out Open Firmware images. * - * Currently, we only look at the first PCI data, we could iteratre and deal with - * them all, and we should use fb_bios_start relative to start of image and not - * relative start of ROM, but so far, I never found a dual-image ATI card + * Currently, we only look at the first PCI data, we could iteratre and + * deal with them all, and we should use fb_bios_start relative to start + * of image and not relative start of ROM, but so far, I never found a + * dual-image ATI card. * * typedef struct { * u32 signature; + 0x00 @@ -852,7 +856,8 @@ static void __iomem * __devinit aty128_map_ROM(const struct aty128fb_par *par, s printk(KERN_INFO "aty128fb: Found HP PA-RISC ROM Image\n"); goto failed; default: - printk(KERN_INFO "aty128fb: Found unknown type %d ROM Image\n", rom_type); + printk(KERN_INFO "aty128fb: Found unknown type %d ROM Image\n", + rom_type); goto failed; } anyway: @@ -863,7 +868,8 @@ static void __iomem * __devinit aty128_map_ROM(const struct aty128fb_par *par, s return NULL; } -static void __devinit aty128_get_pllinfo(struct aty128fb_par *par, unsigned char __iomem *bios) +static void __devinit aty128_get_pllinfo(struct aty128fb_par *par, + unsigned char __iomem *bios) { unsigned int bios_hdr; unsigned int bios_pll; @@ -1247,10 +1253,13 @@ static int aty128_crtc_to_var(const struct aty128_crtc *crtc, static void aty128_set_crt_enable(struct aty128fb_par *par, int on) { if (on) { - aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) | CRT_CRTC_ON); - aty_st_le32(DAC_CNTL, (aty_ld_le32(DAC_CNTL) | DAC_PALETTE2_SNOOP_EN)); + aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) | + CRT_CRTC_ON); + aty_st_le32(DAC_CNTL, (aty_ld_le32(DAC_CNTL) | + DAC_PALETTE2_SNOOP_EN)); } else - aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) & ~CRT_CRTC_ON); + aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) & + ~CRT_CRTC_ON); } static void aty128_set_lcd_enable(struct aty128fb_par *par, int on) @@ -1281,7 +1290,8 @@ static void aty128_set_lcd_enable(struct aty128fb_par *par, int on) } } -static void aty128_set_pll(struct aty128_pll *pll, const struct aty128fb_par *par) +static void aty128_set_pll(struct aty128_pll *pll, + const struct aty128fb_par *par) { u32 div3; @@ -1366,7 +1376,8 @@ static int aty128_var_to_pll(u32 period_in_ps, struct aty128_pll *pll, } -static int aty128_pll_to_var(const struct aty128_pll *pll, struct fb_var_screeninfo *var) +static int aty128_pll_to_var(const struct aty128_pll *pll, + struct fb_var_screeninfo *var) { var->pixclock = 100000000 / pll->vclk; @@ -1512,7 +1523,8 @@ static int aty128fb_set_par(struct fb_info *info) * encode/decode the User Defined Part of the Display */ -static int aty128_decode_var(struct fb_var_screeninfo *var, struct aty128fb_par *par) +static int aty128_decode_var(struct fb_var_screeninfo *var, + struct aty128fb_par *par) { int err; struct aty128_crtc crtc; @@ -1559,7 +1571,8 @@ static int aty128_encode_var(struct fb_var_screeninfo *var, } -static int aty128fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +static int aty128fb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) { struct aty128fb_par par; int err; @@ -1575,7 +1588,8 @@ static int aty128fb_check_var(struct fb_var_screeninfo *var, struct fb_info *inf /* * Pan or Wrap the Display */ -static int aty128fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fb) +static int aty128fb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *fb) { struct aty128fb_par *par = fb->par; u32 xoffset, yoffset; @@ -1594,7 +1608,8 @@ static int aty128fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *f par->crtc.xoffset = xoffset; par->crtc.yoffset = yoffset; - offset = ((yoffset * par->crtc.vxres + xoffset)*(par->crtc.bpp >> 3)) & ~7; + offset = ((yoffset * par->crtc.vxres + xoffset) * (par->crtc.bpp >> 3)) + & ~7; if (par->crtc.bpp == 24) offset += 8 * (offset % 3); /* Must be multiple of 8 and 3 */ @@ -1620,11 +1635,13 @@ static void aty128_st_pal(u_int regno, u_int red, u_int green, u_int blue, * do mirroring */ - aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) | DAC_PALETTE_ACCESS_CNTL); + aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) | + DAC_PALETTE_ACCESS_CNTL); aty_st_8(PALETTE_INDEX, regno); aty_st_le32(PALETTE_DATA, (red<<16)|(green<<8)|blue); #endif - aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & ~DAC_PALETTE_ACCESS_CNTL); + aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & + ~DAC_PALETTE_ACCESS_CNTL); } aty_st_8(PALETTE_INDEX, regno); @@ -1753,7 +1770,8 @@ static int aty128_bl_update_status(struct backlight_device *bd) aty_st_le32(LVDS_GEN_CNTL, reg); } reg &= ~LVDS_BL_MOD_LEVEL_MASK; - reg |= (aty128_bl_get_level_brightness(par, level) << LVDS_BL_MOD_LEVEL_SHIFT); + reg |= (aty128_bl_get_level_brightness(par, level) << + LVDS_BL_MOD_LEVEL_SHIFT); #ifdef BACKLIGHT_LVDS_OFF reg |= LVDS_ON | LVDS_EN; reg &= ~LVDS_DISPLAY_DIS; @@ -1764,7 +1782,8 @@ static int aty128_bl_update_status(struct backlight_device *bd) #endif } else { reg &= ~LVDS_BL_MOD_LEVEL_MASK; - reg |= (aty128_bl_get_level_brightness(par, 0) << LVDS_BL_MOD_LEVEL_SHIFT); + reg |= (aty128_bl_get_level_brightness(par, 0) << + LVDS_BL_MOD_LEVEL_SHIFT); #ifdef BACKLIGHT_LVDS_OFF reg |= LVDS_DISPLAY_DIS; aty_st_le32(LVDS_GEN_CNTL, reg); @@ -1869,7 +1888,8 @@ static void aty128_early_resume(void *data) } #endif /* CONFIG_PPC_PMAC */ -static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent) +static int __devinit aty128_init(struct pci_dev *pdev, + const struct pci_device_id *ent) { struct fb_info *info = pci_get_drvdata(pdev); struct aty128fb_par *par = info->par; @@ -1887,7 +1907,8 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i /* range check to make sure */ if (ent->driver_data < ARRAY_SIZE(r128_family)) - strlcat(video_card, r128_family[ent->driver_data], sizeof(video_card)); + strlcat(video_card, r128_family[ent->driver_data], + sizeof(video_card)); printk(KERN_INFO "aty128fb: %s [chip rev 0x%x] ", video_card, chip_rev); @@ -1911,11 +1932,11 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i /* Indicate sleep capability */ if (par->chip_gen == rage_M3) { pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1); -#if 0 /* Disable the early video resume hack for now as it's causing problems, among - * others we now rely on the PCI core restoring the config space for us, which - * isn't the case with that hack, and that code path causes various things to - * be called with interrupts off while they shouldn't. I'm leaving the code in - * as it can be useful for debugging purposes +#if 0 /* Disable the early video resume hack for now as it's causing problems, + * among others we now rely on the PCI core restoring the config space + * for us, which isn't the case with that hack, and that code path causes + * various things to be called with interrupts off while they shouldn't. + * I'm leaving the code in as it can be useful for debugging purposes */ pmac_set_early_video_resume(aty128_early_resume, par); #endif @@ -1953,11 +1974,11 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i default_vmode = VMODE_1152_768_60; if (default_cmode > 16) - default_cmode = CMODE_32; + default_cmode = CMODE_32; else if (default_cmode > 8) - default_cmode = CMODE_16; + default_cmode = CMODE_16; else - default_cmode = CMODE_8; + default_cmode = CMODE_8; if (mac_vmode_to_var(default_vmode, default_cmode, &var)) var = default_var; @@ -2018,7 +2039,8 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i #ifdef CONFIG_PCI /* register a card ++ajoshi */ -static int __devinit aty128_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +static int __devinit aty128_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { unsigned long fb_addr, reg_addr; struct aty128fb_par *par; @@ -2318,39 +2340,39 @@ static inline void aty128_rectcopy(int srcx, int srcy, int dstx, int dsty, u_int width, u_int height, struct fb_info_aty128 *par) { - u32 save_dp_datatype, save_dp_cntl, dstval; - - if (!width || !height) - return; - - dstval = depth_to_dst(par->current_par.crtc.depth); - if (dstval == DST_24BPP) { - srcx *= 3; - dstx *= 3; - width *= 3; - } else if (dstval == -EINVAL) { - printk("aty128fb: invalid depth or RGBA\n"); - return; - } - - wait_for_fifo(2, par); - save_dp_datatype = aty_ld_le32(DP_DATATYPE); - save_dp_cntl = aty_ld_le32(DP_CNTL); - - wait_for_fifo(6, par); - aty_st_le32(SRC_Y_X, (srcy << 16) | srcx); - aty_st_le32(DP_MIX, ROP3_SRCCOPY | DP_SRC_RECT); - aty_st_le32(DP_CNTL, DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM); - aty_st_le32(DP_DATATYPE, save_dp_datatype | dstval | SRC_DSTCOLOR); - - aty_st_le32(DST_Y_X, (dsty << 16) | dstx); - aty_st_le32(DST_HEIGHT_WIDTH, (height << 16) | width); - - par->blitter_may_be_busy = 1; - - wait_for_fifo(2, par); - aty_st_le32(DP_DATATYPE, save_dp_datatype); - aty_st_le32(DP_CNTL, save_dp_cntl); + u32 save_dp_datatype, save_dp_cntl, dstval; + + if (!width || !height) + return; + + dstval = depth_to_dst(par->current_par.crtc.depth); + if (dstval == DST_24BPP) { + srcx *= 3; + dstx *= 3; + width *= 3; + } else if (dstval == -EINVAL) { + printk("aty128fb: invalid depth or RGBA\n"); + return; + } + + wait_for_fifo(2, par); + save_dp_datatype = aty_ld_le32(DP_DATATYPE); + save_dp_cntl = aty_ld_le32(DP_CNTL); + + wait_for_fifo(6, par); + aty_st_le32(SRC_Y_X, (srcy << 16) | srcx); + aty_st_le32(DP_MIX, ROP3_SRCCOPY | DP_SRC_RECT); + aty_st_le32(DP_CNTL, DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM); + aty_st_le32(DP_DATATYPE, save_dp_datatype | dstval | SRC_DSTCOLOR); + + aty_st_le32(DST_Y_X, (dsty << 16) | dstx); + aty_st_le32(DST_HEIGHT_WIDTH, (height << 16) | width); + + par->blitter_may_be_busy = 1; + + wait_for_fifo(2, par); + aty_st_le32(DP_DATATYPE, save_dp_datatype); + aty_st_le32(DP_CNTL, save_dp_cntl); } @@ -2358,17 +2380,17 @@ static inline void aty128_rectcopy(int srcx, int srcy, int dstx, int dsty, * Text mode accelerated functions */ -static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy, int dx, - int height, int width) +static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy, + int dx, int height, int width) { - sx *= fontwidth(p); - sy *= fontheight(p); - dx *= fontwidth(p); - dy *= fontheight(p); - width *= fontwidth(p); - height *= fontheight(p); - - aty128_rectcopy(sx, sy, dx, dy, width, height, + sx *= fontwidth(p); + sy *= fontheight(p); + dx *= fontwidth(p); + dy *= fontheight(p); + width *= fontwidth(p); + height *= fontheight(p); + + aty128_rectcopy(sx, sy, dx, dy, width, height, (struct fb_info_aty128 *)p->fb_info); } #endif /* 0 */ diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c index 77da6a2f43dc986a5b6eb17d065b9f53b80dce69..c03ecdd31e4c6133f31a54c143038682c694dc87 100644 --- a/drivers/video/auo_k190x.c +++ b/drivers/video/auo_k190x.c @@ -987,7 +987,6 @@ int __devinit auok190x_common_probe(struct platform_device *pdev, fb_dealloc_cmap(&info->cmap); err_cmap: fb_deferred_io_cleanup(info); - kfree(info->fbdefio); err_defio: vfree((void *)info->screen_base); err_irq: @@ -1022,7 +1021,6 @@ int __devexit auok190x_common_remove(struct platform_device *pdev) fb_dealloc_cmap(&info->cmap); fb_deferred_io_cleanup(info); - kfree(info->fbdefio); vfree((void *)info->screen_base); diff --git a/drivers/video/console/bitblit.c b/drivers/video/console/bitblit.c index 28b1a834906b1f59d31c49421e771aa5e6f8aae7..61b182bf32a22962492cc79a3b1e60f3f49ef388 100644 --- a/drivers/video/console/bitblit.c +++ b/drivers/video/console/bitblit.c @@ -162,7 +162,7 @@ static void bit_putcs(struct vc_data *vc, struct fb_info *info, image.depth = 1; if (attribute) { - buf = kmalloc(cellsize, GFP_KERNEL); + buf = kmalloc(cellsize, GFP_ATOMIC); if (!buf) return; } diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 2e471c22abf5a5e835704e71767017923f747c0c..fdefa8fd72c4da070787d95260b2744d6a9a7dab 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -372,8 +372,15 @@ static void fb_flashcursor(struct work_struct *work) struct vc_data *vc = NULL; int c; int mode; + int ret; + + /* FIXME: we should sort out the unbind locking instead */ + /* instead we just fail to flash the cursor if we can't get + * the lock instead of blocking fbcon deinit */ + ret = console_trylock(); + if (ret == 0) + return; - console_lock(); if (ops && ops->currcon != -1) vc = vc_cons[ops->currcon].d; @@ -442,7 +449,7 @@ static int __init fb_console_setup(char *this_opt) while ((options = strsep(&this_opt, ",")) != NULL) { if (!strncmp(options, "font:", 5)) - strcpy(fontname, options + 5); + strlcpy(fontname, options + 5, sizeof(fontname)); if (!strncmp(options, "scrollback:", 11)) { options += 11; diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 47118c75a4c07fc2190601db42d9942ad7030053..7ae9d53f2bf16bf7ca150eba98a997c1aa1afd6a 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -30,7 +30,10 @@ #include #include #include +#include #include +#include +#include #include